WorldWideScience

Sample records for industrial arts safety

  1. Robotics and Industrial Arts.

    Science.gov (United States)

    Edmison, Glenn A.; And Others

    Robots are becoming increasingly common in American industry. By l990, they will revolutionize the way industry functions, replacing hundreds of workers and doing hot, dirty jobs better and more quickly than the workers could have done them. Robotics should be taught in high school industrial arts programs as a major curriculum component. The…

  2. CFD use in PTS safety analysis state of art and challenges for industrial applications

    International Nuclear Information System (INIS)

    Martin, Alain; Cornille, Sebastien; Lestang, Frederic; Bellet, Serge; Barbier, Anthony; Vit, Carole; Huvelin, Fabien

    2009-01-01

    For the Reactor Pressure Vessel (RPV) assessment and lifetime evaluation of the nuclear plants, French Utility applies a series of calculations including thermal-hydraulic, thermo mechanical and fracture mechanics studies in order to study the Pressurized Thermal Shock (PTS) in the downcomer caused by the safety injection. Within the frame of the plant life time project, integrity assessments of the French 900 MWe (3-loops) series RPV have been performed. We found that the modeling of thermal-hydraulics loads is a source of gain. Considering the length of local 3D calculation and the large number of cases, EDF and AREVA-NP decided to share the effort. From a physical phenomena point of view, the results of the system code analysis (CATHARE computation) of the PTS transient induce two kinds of scenarios: single phase and two-phase flows in the cold leg. For single phase flow, the two chains of software differ: EDF uses Code Saturne (coupled with the thermal solid code SYRTHES) and AREVA-NP uses STAR CD for thermal hydraulic computation. According to this approach, comparison between the two chains of tools has been performed. Moreover this action contributes to the verification and the validation of each code in accordance with the OECD Best Practice Guidelines (BPG). The study has been achieved by two independent teams from EDF and AREVA-NP. It should be emphasized that this benchmark helped to strengthen the accuracy of CFD and the adapted methodology (working progress). The good agreement observed between the different results and their accordance with the validation computations confirms the validity of the approach. In the case where the cold legs are partially filled with steam, it becomes a two-phase problem and new important effects occur. Thus, an advanced prediction of RPV thermal loading during these transients requires sophisticated two-phase, local scale, 3D codes. In that purpose, a program has been set up to extend the capabilities of the NEPTUNE CFD

  3. Industrial Art: Mission to Meaning

    Science.gov (United States)

    Wilhelm, Mike

    2009-01-01

    This is a story about industrial art. It is certainly not a story about smart studios and fashionable galleries, subtle techniques and aesthetic beauty. This is a story of sheet rock, nails, and low-grade lumber in the hands of unskilled teenage laborers. While this story boasts of no future museum pieces, it tells a heartwarming story of rare…

  4. Safety in construction industry

    International Nuclear Information System (INIS)

    Khan, A.M.

    1979-01-01

    Causative factors of accidents in construction industry in the context of experience of construction work of the Rajasthan Atomic Power Project are enumerated. The aspect of accident cost - direct and indirect - is discussed briefly. Setting up of a safety set-up at construction sites is emphasized and principles which should guide the accident prevention programme are spelt out. (M.G.B.)

  5. Study of industry safety management

    International Nuclear Information System (INIS)

    Park, Pil Su

    1987-06-01

    This book deals with general remarks, industrial accidents, statistics of industrial accidents, unsafe actions, making machinery and facilities safe, safe activities, having working environment safe, survey of industrial accidents and analysis of causes, system of safety management and operations, safety management planning, safety education, human engineering such as human-machines system, system safety, and costs of disaster losses. It lastly adds individual protective equipment and working clothes including protect equipment for eyes, face, hands, arms and feet.

  6. Leadership for safety: industrial experience.

    Science.gov (United States)

    Flin, R; Yule, S

    2004-12-01

    The importance of leadership for effective safety management has been the focus of research attention in industry for a number of years, especially in energy and manufacturing sectors. In contrast, very little research into leadership and safety has been carried out in medical settings. A selective review of the industrial safety literature for leadership research with possible application in health care was undertaken. Emerging findings show the importance of participative, transformational styles for safety performance at all levels of management. Transactional styles with attention to monitoring and reinforcement of workers' safety behaviours have been shown to be effective at the supervisory level. Middle managers need to be involved in safety and foster open communication, while ensuring compliance with safety systems. They should allow supervisors a degree of autonomy for safety initiatives. Senior managers have a prime influence on the organisation's safety culture. They need to continuously demonstrate a visible commitment to safety, best indicated by the time they devote to safety matters.

  7. A Guide for Equipping Industrial Arts Facilities.

    Science.gov (United States)

    American Industrial Arts Association, Washington, DC. Equipment Guide Committee.

    A guide for planning new and revising existing industrial arts facilities which gives a listing of tools and equipment recommended for each of the major areas of instruction (automotive and power mechanics, ceramics, drafting, electronics, elementary, general shop, graphic arts, metalworking, plastics, and woodworking). General descriptions and…

  8. Industrial safety in power plants

    International Nuclear Information System (INIS)

    1987-01-01

    The proceedings of the VGB conference 'Industrial safety in power plants' held in the Gruga-Halle, Essen on January 21 and 22, 1987, contain the papers reporting on: Management responsibility for and legal consequences of industrial safety; VBG 2.0 Industrial Accident Prevention Regulation and the power plant operator; Operational experience gained with wet-type flue gas desulphurization systems; Flue gas desulphurization systems: Industrial-safety-related requirements to be met in planning and operation; the effects of the Hazardous Substances Ordinance on power plant operation; Occupational health aspects of heat-exposed jobs in power plants; Regulations of the Industrial Accident Insurance Associations concerning heat-exposed jobs and industrial medical practice; The new VBG 30 Accident Prevention Regulation 'Nuclear power plants'; Industrial safety in nuclear power plants; safe working on and within containers and confined spaces; Application of respiratory protection equipment in power plants. (HAG) [de

  9. Precisionism: Art in the Industrial Age

    Science.gov (United States)

    McMullen, Brianna

    2006-01-01

    A result of the industrial age was a short-lived but powerful new American art movement called Precisionism, most evident in painting, but visible also in drawing, photography, and print-making, focusing on industrial and mechanical subjects. Precisionism originated in the 1920s, allied with European Cubism's fascination with shape and geometric…

  10. Robotics: A New Challenge For Industrial Arts.

    Science.gov (United States)

    Lovedahl, Gerald G.

    1983-01-01

    The author argues that jobs in the future will depend less on manual skill and more on perceptual aptitude, formal knowledge, and precision. Industrial arts classes must include robotics in their curriculum if they intend to reflect accurately American industry. (Author/SSH)

  11. Practicing industrial safety - issues involved

    International Nuclear Information System (INIS)

    Gunasekaran, P.

    2016-01-01

    Industrial safety is all about measures or techniques implemented to reduce the risk of injury, loss to persons, property or the environment in any industrial facility. The issue of industrial safety evolved concurrently with industrial development as a shift from compensation to prevention as well. Today, industrial safety is widely regarded as one of the most important factors that any business, large or small, must consider in its operations, as prevention of loss is also a part of profit. Factories Act of Central government and Rules made under it by the state deals with the provisions on industrial safety legislation. There are many other acts related to safety of personnel, property and environment. Occupational health and safety is also of primary concern. The aim is to regulate health and safety conditions for all employers. It includes safety standards and health standards. These acts encourage employers and employees to reduce workplace hazards and to implement new or improve existing safety and health standards; and develop innovative ways to achieve them. Maintain a reporting and record keeping system to monitor job-related injuries and illnesses; establish training programs to increase the number and competence of occupational safety and health personnel

  12. Industrial hazard and safety handbook

    CERN Document Server

    King, Ralph W

    1979-01-01

    Industrial Hazard and Safety Handbook (Revised Impression) describes and exposes the main hazards found in industry, with emphasis on how these hazards arise, are ignored, are identified, are eliminated, or are controlled. These hazard conditions can be due to human stresses (for example, insomnia), unsatisfactory working environments, as well as secret industrial processes. The book reviews the cost of accidents, human factors, inspections, insurance, legal aspects, planning for major emergencies, organization, and safety measures. The text discusses regulations, codes of practice, site layou

  13. Radiation protection and safety in industrial radiography

    International Nuclear Information System (INIS)

    1999-01-01

    The use of ionizing radiation, particularly in medicine and industry, is growing throughout the world, with further expansion likely as technical developments result from research. One of the longest established applications of ionizing radiation is industrial radiography, which uses both X radiation and gamma radiation to investigate the integrity of equipment and structures. Industrial radiography is widespread in almost all Member States. It is indispensable to the quality assurance required in modern engineering practice and features in the work of multinational companies and small businesses alike. Industrial radiography is extremely versatile. The equipment required is relatively inexpensive and simple to operate. It may be highly portable and capable of being operated by a single worker in a wide range of different conditions, such as at remote construction sites, offshore locations and cross-country pipelines as well as in complex fabrication facilities. The associated hazards demand that safe working practices be developed in order to minimize the potential exposure of radiographers and other persons who may be in the vicinity of the work. The use of shielded enclosures (fixed facilities), with effective safety devices, significantly reduces any radiation exposures arising from the work. This Safety Report summarizes good and current state of the art practices in industrial radiography and provides technical advice on radiation protection and safety. It contains information for Regulatory Authorities, operating organizations, workers, equipment manufacturers and client organizations, with the intention of explaining their responsibilities and means to enhance radiation protection and safety in industrial radiography

  14. Industrial Safety and Accidents Prevention

    International Nuclear Information System (INIS)

    Sajjad Akbar

    2006-01-01

    Accident Hazards, dangers, losses and risk are what we would to like to eliminate, minimize or avoid in industry. Modern industries have created many opportunities for these against which man's primitive instincts offer no protection. In today's complex industrial environment safety has become major preoccupation, especially after the realization that there is a clear economic incentive to do so. Industrial hazards may cause by human error or by physical or mechanical malfunction, it is very often possible to eliminate the worst consequences of human error by engineering modification. But the modification also needs checking very thoroughly to ensue that it has not introduced some new and unsuspected hazard. (author)

  15. FOOD SAFETY IN CATERING INDUSTRY

    Directory of Open Access Journals (Sweden)

    P. Cattaneo

    2009-03-01

    Full Text Available Catering industry plays a very important role in public health management, because about 30% of total daily meals are consumed in catering industry (restaurants, bar. In this work food safety was evaluated in 20 catering centres throughout microbiological analyses of different categories of meals. Results demonstrate that there was an important decrease of microbial contamination between 2006 and 2007, no pathogens were found in 217 samples examined: this was obtained by improving voluntary controls.

  16. Safety of industrial irradiation plants

    International Nuclear Information System (INIS)

    1992-01-01

    Radiation is nowadays used in many applications in industry and medicine; accidental exposure, however, can have grave consequences as large doses of radiation occur in the 600 accelerator or gamma source plants in use around the world. This film explains the operation of irradiation plants and the safety procedures that must be followed to prevent accidents and to ensure safe use

  17. Applying the behaviour grid for improving safety in industrial environments

    NARCIS (Netherlands)

    Boer, de J. (Johannes); Heylen, D. (Dirk); Teeuw, W.B. (Wouter)

    2013-01-01

    The Saxion University of Applied Sciences recently started its “Safety at Work” project. Its objective is to increase safety in the workplace by combining and applying state-of-the-art factors from Ambient Intelligence, Industrial & Product Design and Smart Materials [1].The human

  18. Safety in construction industry - overview

    International Nuclear Information System (INIS)

    Chockalingam, S.; Nehru, R.M.; Ramprasad, K.; Sonawane, A.U.

    2016-01-01

    The construction industry plays an important role in the social and economic development in a country. Safety in the construction industry is considered a major issue in developed and developing countries. In urban sector of India increasing numbers of workers have taken up construction work as a means of immediate employment, which provides cash earnings at the end of the day. Being as unorganized sector, the fatal injuries in DAE unit for the construction industry (Nuclear Power Project including BHAVINI: 62.7% from 1999 to 2014) is higher than the category for all other units (UCIL:13.3%; ECIL:6.7%; NFC and ZC: 4%; HWP: 2.7%; IREL:2.7%; Nuclear Power Plant: 2.7% etc., from 1999 to 2014). A variety hazards exist in the construction site. The best way to protect workers against workers against hazards is to control problems at the source. The problem regarding construction industry is not that the hazards and risks are unknown, but it very difficult to accurately identify in a constantly changing work environment. To prevent hazards at work, all possible hazards that may be encountered should be identified in advance through Job Hazard Analysis (JHA). The present scenario has deduced a fact that efficient Safety Management Techniques (SMT) are (essential for today's construction companies and adaptation of legal requirements including regulatory requirements and proactive safety management techniques will help organizations in providing a better workplace to its employees and reduce the accidents. (author)

  19. Safety management in the industry

    International Nuclear Information System (INIS)

    Jaecklin, A.

    1996-01-01

    The safety management in the industry is characterised by the large number of processes and the materials used in them. Correspondingly large are the legal regulations. Through the thickets of today's controls, the industry moves inside a relatively tight network of technical regulations. The experience of environmental audits and industrial damage, however, shows that the greatest deficit lies in the organisational methods and less on the technical side. For the overcoming of risks one needs to recognise the weaknesses of a careful analysis. To this belongs the estimation of how far a possible scenario can be taken. The estimation of the possibilities of occurrence, however, comes up against particular problems in the industry, as the human factor in relationship with danger potentialities is very difficult to evaluate. Actual basic data or statistics are missing. This lack can only be made good with the building up of a safety management. The fundamental principles of such a management can be taken from the environmental management and especially from the standard for environmental management ISO 14001. Here it is important that safety management is integrated into the process-oriented business processes and thus becomes a part of the company culture. (author) 11 figs., tabs., 11 refs

  20. Upgrading safety systems of industrial irradiation facilities

    International Nuclear Information System (INIS)

    Gomes, R.S.; Gomes, J.D.R.L.; Costa, E.L.C.; Costa, M.L.L.; Thomé, Z.D.

    2017-01-01

    The first industrial irradiation facility in operation in Brazil was designed in the 70s. Nowadays, twelve commercial and research facilities are in operation and two already decommissioned. Minor modifications and upgrades, as sensors replacement, have been introduced in these facilities, in order to reduce the technological gap in the control and safety systems. The safety systems are designed in agreement with the codes and standards at the time. Since then, new standards, codes and recommendations, as well as lessons learned from accidents, have been issued by various international committees or regulatory bodies. The rapid advance of the industry makes the safety equipment used in the original construction become obsolete. The decreasing demand for these older products means that they are no longer produced, which can make it impossible or costly to obtain spare parts and the expansion of legacy systems to include new features. This work aims to evaluate existing safety systems at Brazilian irradiation facilities, mainly the oldest facilities, taking into account the recommended IAEA's design requirements. Irrespective of the fact that during its operational period no event with victims have been recorded in Brazilian facilities, and that the regulatory inspections do not present any serious deviations regarding the safety procedures, it is necessary an assessment of safety system with the purpose of bringing their systems to 'the state of the art', avoiding their rapid obsolescence. This study has also taken into account the knowledge, concepts and solutions developed to upgrading safety system in irradiation facilities throughout the world. (author)

  1. Upgrading safety systems of industrial irradiation facilities

    Energy Technology Data Exchange (ETDEWEB)

    Gomes, R.S.; Gomes, J.D.R.L.; Costa, E.L.C.; Costa, M.L.L., E-mail: rogeriog@cnen.gov.br, E-mail: jlopes@cnen.gov.br, E-mail: evaldo@cnen.gov.br, E-mail: mara@cnen.gov.br [Comissão Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil). Diretoria de Radioproteção e Segurança Nuclear; Thomé, Z.D., E-mail: zielithome@gmail.com [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Seção de Engenharia Nuclear

    2017-07-01

    The first industrial irradiation facility in operation in Brazil was designed in the 70s. Nowadays, twelve commercial and research facilities are in operation and two already decommissioned. Minor modifications and upgrades, as sensors replacement, have been introduced in these facilities, in order to reduce the technological gap in the control and safety systems. The safety systems are designed in agreement with the codes and standards at the time. Since then, new standards, codes and recommendations, as well as lessons learned from accidents, have been issued by various international committees or regulatory bodies. The rapid advance of the industry makes the safety equipment used in the original construction become obsolete. The decreasing demand for these older products means that they are no longer produced, which can make it impossible or costly to obtain spare parts and the expansion of legacy systems to include new features. This work aims to evaluate existing safety systems at Brazilian irradiation facilities, mainly the oldest facilities, taking into account the recommended IAEA's design requirements. Irrespective of the fact that during its operational period no event with victims have been recorded in Brazilian facilities, and that the regulatory inspections do not present any serious deviations regarding the safety procedures, it is necessary an assessment of safety system with the purpose of bringing their systems to 'the state of the art', avoiding their rapid obsolescence. This study has also taken into account the knowledge, concepts and solutions developed to upgrading safety system in irradiation facilities throughout the world. (author)

  2. Risk management for industrial safety

    International Nuclear Information System (INIS)

    Novogno, A.

    1989-01-01

    The catastrophic accidents which have occurred in the last decade, in both developed and developing countries, have drawn the attention of decision-makers in the safety area to the urgent necessity to assess and manage risks from hazardous industrial activities which are concentrated in large industrialized areas. The aim of this paper is to review experience gained in conducting studies in the area of 'comparisons of risks in energy systems' and on the practical application of 'cost effectiveness of risk reduction analysis among different energy systems' (case studies). It is also the aim of the paper to discuss and propose a general framework for defining an 'integrated approach' to risk assessment and management in highly industrialized regions within a country. (author)

  3. Industrial safety, origins and current situation

    International Nuclear Information System (INIS)

    Gil Sarralbo, J. F.

    2011-01-01

    Basic Introduction to Industrial Safety, purpose and expected outcome. Concepts and fundamental principles that support it. Brief overview of its evolution over the course of history. The current legal basis in Spain for Industrial Safety. (Author) 4 refs.

  4. Subjugated in the Creative Industries The Fine Arts in Singapore

    DEFF Research Database (Denmark)

    Ooi, Can-Seng

    2011-01-01

    to economic value. Fine arts practices will not be as lucrative or popular as their counterparts in the other creative businesses; they will remain poor cousins in the creative industries. Essentially, the fine arts are being subjugated in the creative industries and the Singaporean art world is being changed....

  5. Industrial Radiography Safety in Australia

    International Nuclear Information System (INIS)

    Hockings, Colin

    2006-01-01

    400 μSv average for industrial radiographers in a developed country such as the United Kingdom (NRPB 2005), it is less than that reported for a developing country such as Iran (AEOI 2004), which is 1650 μSv. Industrial radiography accidents most frequently occur with radiation devices using sealed sources such as iridium 192 and cobalt 60, and not with x-ray generators. In comparison to other countries, the safety record of industrial radiographers as judged by accident data and dose records, places Australia somewhere between that of an advanced country and a developing one. Many of the investigations into accidents in industrial radiography have revealed that their frequency and severity would have been reduced or even eliminated if the persons involved had been better prepared to use the equipment, and better prepared to deal with accident and incident situations. In Australia, there appears to be scope for improvement and standardisation of training in the use of industrial radiography equipment, and more importantly, in the training for response to possible accidents and incidents. A national standard for radiation safety training and assessment should be developed by a competent organisation such as the Australian Institute for Non-Destructive Testing. It should be incorporated into the Code of Practice or Safety Guide for industrial radiography and adopted by all jurisdictions. The use of a code of safe practice for industrial radiography should continue. The present NH and MRC code is in need of review. Such a review must result in a code and a guideline document which are readily useable by the industry, standardise training in radiation safety, ensure a high level of operational radiation safety and are available for adoption by the various Australian jurisdictions with minimal supplementary local requirements. Copyright (2006) The Australian Institute for Non-Destructive Testing

  6. Nuclear industry and radioecological safety

    International Nuclear Information System (INIS)

    Semenov, V. G.

    2006-01-01

    The beginning of XXI century is marked with increasing public concern over impact of man-made activity, including nuclear technologies, on the environment. Currently, the anthropocentric principle is applied in the course of the radioecological safety guaranteeing for the environment, which postulates that human protectability serves as guarantee of the environmental one. However, this principle correctness is called in question recently. The ecocentric principle is proposed as an alternative doctrine, defining balance between human importance and that of any other elements of biota. The system recommended isn't intended for the regulatory standards development yet, because of substantial gaps in scientific knowledge. Nevertheless, renunciation of the anthropocentric principle can result in unwarranted tightened regulatory basis, decreasing of nuclear industry evolution rates, and, consequently, breaching of societal and economical priorities. It is obvious that for the safety guaranteeing, nuclear industry shouldn't stand out against a background of other fields of human activity involved hazard factors. Therefore, new conceptions applying within the regulatory system is to be weighted and exclude formal using of discussion theses. More than semi-centennial experience of the anthropocentric approach applying serves as an evidence of safe protection of ecosystems against radiation exposure that ensures safe ecological development of nuclear power industry and other fields of nuclear technologies application. (author)

  7. Industrial safety: its structuring and content

    International Nuclear Information System (INIS)

    Munoz, A.; Rodriguez, J.; Martinez-Val, J.M.

    1999-01-01

    Industrial development has led to an on-going increase in productivity, but the concept of safety has also become highly relevant. In this article, the authors address the structuring and content of industrial safety which involves laying down essential safety requirements, both in manufacturing and processes and in products. (Author)

  8. Advanced Technical Drafting (Industrial Arts) Curriculum Guide. Bulletin 1751.

    Science.gov (United States)

    Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

    This curriculum guide contains materials for a 17-unit course in advanced technical drafting, a followup to the basic technical drafting course in the industrial arts curriculum for grades 10-12. It is intended for use by industrial arts teachers, supervisors, counselors, administrators, and teacher educators. A three-page course overview provides…

  9. Facilities management and industrial safety

    International Nuclear Information System (INIS)

    2003-06-01

    This book lists occupation safety and health acts with purpose, definition and management system of safety and health, enforcement ordinance of occupation safety and health acts and enforcement regulations such as general rules, safety and health cover, system of management on safety and health, regulation of management on safety and health, regulations of harmfulness and protection of danger, heath management for workers, supervisor and command and inspection of machine and equipment.

  10. Plastic Technology (Production). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    Science.gov (United States)

    Claus, Robert; And Others

    This course guide for a plastic technology course is one of four developed for the production area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and graphic communications.) Part 1 provides such introductory information as a definition and…

  11. Advances in industrial ergonomics and safety I

    Energy Technology Data Exchange (ETDEWEB)

    Mital, A. (ed.) (University of Cincinnati, Cincinnati, OH (USA). Dept. of Mechanical and Industrial Engineering, Ergonomics Research Lab.)

    1989-01-01

    125 papers are presented under the session headings: industrial ergonomics - programs and applications; applied work physiology; occupational biomechanics; engineering anthropometry; work and protective clothing; hand tools; human-computer interface; theory and practice of industrial safety; human perception and performance; human strengths; industrial noise and vibration; machine guarding and industrial machine safety; manual materials handling; modelling for safety and health; occupational injuries and health problems; policies and standards; quality control and inspection; rehabilitation and designing for the disabled; work duration and fatigue; and work and work place design. Includes papers on static and dynamic back strength of underground coal miners, and slip and fall accidents during equipment maintenance in the surface mining industry.

  12. Workplace Safety and Health: Body Art

    Science.gov (United States)

    ... Publications and Products Programs Contact NIOSH NIOSH BODY ART Language: English (US) Español (Spanish) Recommend on Facebook ... no longer being maintained or updated. Creating living art is a unique talent, but it puts tattooists ...

  13. Reviewing industrial safety in nuclear power plants

    International Nuclear Information System (INIS)

    1990-02-01

    This document contains guidance and reference materials for Operational Safety Review Team (OSART) experts, in addition to the OSART Guidelines (TECDOC-449), for use in the review of industrial safety activities at nuclear power plants. It sets out objectives for an excellent industrial safety programme, and suggests investigations which should be made in evaluating industrial safety programmes. The attributes of an excellent industrial safety programme are listed as examples for comparison. Practical hints for reviewing industrial safety are discussed, so that the necessary information can be obtained effectively through a review of documents and records, discussions with counterparts, and field observations. There are several annexes. These deal with major features of industrial safety programmes such as safety committees, reporting and investigation systems and first aid and medical facilities. They include some examples which are considered commendable. The document should be taken into account not only when reviewing management, organization and administration but also in the review of related areas, such as maintenance and operations, so that all aspects of industrial safety in an operating nuclear power plant are covered

  14. Learning from safety in other industries

    NARCIS (Netherlands)

    Terwel, K.C.; Zwaard, W

    2012-01-01

    The Dutch building industry has been shocked by some major structural accidents during the last 10 years with buildings during construction as well as with delivered buildings. Several initiatives were started to improve the safety. In other industries the safety awareness seemed to be more

  15. Radiation Safety in Industrial Radiography. Specific Safety Guide (Spanish Edition)

    International Nuclear Information System (INIS)

    2013-01-01

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography

  16. Radiation Safety in Industrial Radiography. Specific Safety Guide

    International Nuclear Information System (INIS)

    2011-01-01

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

  17. Radiation Safety in Industrial Radiography. Specific Safety Guide (French Edition)

    International Nuclear Information System (INIS)

    2013-01-01

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in … shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography

  18. Radiation Safety in Industrial Radiography. Specific Safety Guide (Arabic Edition)

    International Nuclear Information System (INIS)

    2012-01-01

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

  19. Safety culture in nuclear industry

    International Nuclear Information System (INIS)

    Sundararajan, A.R.

    1998-01-01

    This paper after defining the term safety culture outlines the requirements at various levels of the plant management to ensure that safety culture pervades all activities related to the plant. Techniques are also indicated which can be used to assess the effectiveness of safety culture

  20. Safety indicators for the peat industry

    Energy Technology Data Exchange (ETDEWEB)

    Berezhnoy, S A; Sedov, Yu I; Yenoshevskiy, B A

    1981-01-01

    Members of the inter-institutional department of 'Labor Protection' of the KPI, in cooperation with members of the peat industry, have developed safety indicators for the peat industry in accordance with the requirements of GOST 12.4.026-76 SSBT, and established the range and order for their use. The safety indicators for the peat industry are divided into four groups (prohibiting, warning, regulating, and indicating), depending on the function.

  1. Changes in the Graphic Arts Industry in Switzerland.

    Science.gov (United States)

    Meyer, Rene-Simon

    1992-01-01

    Major changes affecting Swiss graphic arts are photocomposition, replacement of letterpress with offset printing, scanners, and microcomputers and laser printers for desktop publishing. Effects on workers include monotony, alienation, and apprehension. Sex discrimination continues in the industry. (SK)

  2. Industrial Design: Applied Arts Component as a Factor in Design ...

    African Journals Online (AJOL)

    DrNneka

    Key Words: Algorithmic/ Heuristic Approaches, Industrial Plasticine, Play dough, .... engineering for instance, is also applicable in the actualization of the applied arts .... It is made of wax which has a chemical make-up that contains sulphur,.

  3. Safety culture in industrial radiography facility

    International Nuclear Information System (INIS)

    Vincent-Furo, Evelyn

    2015-02-01

    This project reviewed published IAEA materials and other documents on safety culture with specific references to industrial radiography. Safety culture requires all duties important to safety to be carried out correctly, with alertness, due thought and full knowledge, sound judgment and a proper sense of accountability. The development and maintenance of safety culture in an operating organization has to cover management systems, policies, responsibilities, procedures and organizational arrangements. The essence is to control radiation hazard, optimize radiation protection to prevent or reduce exposures and mitigate the consequences of accidents and incidents. To achieve a high degree of safety culture appropriate national and international infrastructure should exist to ensure effective training of workers and management system that supports commitment to safety culture at all level of the organization; management, managers and workforce. The result of the review revealed that all accidents in industrial radiography facilities were due to poor safety culture practices including inadequate regulatory control oversight. Some recommendations are provided and if implemented could improve safety culture leading to good safety performance which will significantly reduce accidents and their consequences in industrial radiography. These examples call for a review of safety culture in Industrial radiography. (au)

  4. Road safety and trade and industry.

    OpenAIRE

    2014-01-01

    Trade and industry mostly experience the negative consequences of crashes, but sometimes the consequences are positive. The negative consequences of road traffic crashes include loss of personnel and damage to vehicles. Some other industries, such as damage repair companies, on the other hand, derive income from road crashes. Trade and industry can also be of importance for road safety. Particularly the transport sector, the car industry and insurers take several initiatives which for example...

  5. Explosion safety in industrial electrostatics

    Science.gov (United States)

    Szabó, S. V.; Kiss, I.; Berta, I.

    2011-01-01

    Complicated industrial systems are often endangered by electrostatic hazards, both from atmospheric (lightning phenomenon, primary and secondary lightning protection) and industrial (technological problems caused by static charging and fire and explosion hazards.) According to the classical approach protective methods have to be used in order to remove electrostatic charging and to avoid damages, however no attempt to compute the risk before and after applying the protective method is made, relying instead on well-educated and practiced expertise. The Budapest School of Electrostatics - in close cooperation with industrial partners - develops new suitable solutions for probability based decision support (Static Control Up-to-date Technology, SCOUT) using soft computing methods. This new approach can be used to assess and audit existing systems and - using the predictive power of the models - to design and plan activities in industrial electrostatics.

  6. Safety Considerations in the Chemical Process Industries

    Science.gov (United States)

    Englund, Stanley M.

    There is an increased emphasis on chemical process safety as a result of highly publicized accidents. Public awareness of these accidents has provided a driving force for industry to improve its safety record. There has been an increasing amount of government regulation.

  7. Operation safety of complex industrial systems

    International Nuclear Information System (INIS)

    Zwingelstein, G.

    1999-01-01

    Zero fault or zero risk is an unreachable goal in industrial activities like nuclear activities. However, methods and techniques exist to reduce the risks to the lowest possible and acceptable level. The operation safety consists in the recognition, evaluation, prediction, measurement and mastery of technological and human faults. This paper analyses each of these points successively: 1 - evolution of operation safety; 2 - definitions and basic concepts: failure, missions and functions of a system and of its components, basic concepts and operation safety; 3 - forecasting analysis of operation safety: reliability data, data-banks, precautions for the use of experience feedback data; realization of an operation safety study: management of operation safety, quality assurance, critical review and audit of operation safety studies; 6 - conclusions. (J.S.)

  8. Internet Marketing in Cultural Industries: from movie to arts

    OpenAIRE

    Besana, Angela

    2010-01-01

    Marketing skills have been developed by firms of several cultural industries for more than three decades. From movie companies to performing arts, from museums to art fairs, every stakeholder has adopted and is going to implement innovative communication strategies. Digital advertising and e-fundraising might represent the boundaries of the present and the future of cultural promotion. First of all we will explore the impact of Information and Communication Technologies in the Cultural (cr...

  9. Industrial Student Apprenticeship: Understanding Health and Safety

    Science.gov (United States)

    Simanjuntak, M. V.; Abdullah, A. G.; Puspita, R. H.; Mahdan, D.; Kamaludin, M.

    2018-02-01

    The level of accident in industry is very high caused by lack of knowledge and awareness of workers toward the health and safety. Health and Safety are efforts to create a comfortable and productive atmosphere to accomplish a purpose or goal as maximum risk in the workplace. Vocational Education students must conduct training on business and industry, prior to that they should have a clear understanding on occupational health and safety. The purpose of this research is to analyze the understanding, preparation, and implementation of work health and safety of the students. Method used is descriptive method and data are collected using instrument, observation and interview. The result of study is conclusion of understanding occupational health and safety of vocational education students.

  10. Occupational safety in the petroleum industry

    Energy Technology Data Exchange (ETDEWEB)

    Elsner, W

    1987-03-01

    The original technique-oriented accident prevention today has grown to a comprehensive occupational workers protection system. Modern occupational safety requires latest strategies. Side by side with technical and organizational measures we see duties for all superiors directed to plant related occupational safety. These new principles of leadership on the basis of occupational safety policies from top management require equivalent tactics to cause change in behaviour of the employees. Such a not only formulated but also accepted safety strategy is extremely clear by its positive results in the petroleum industry.

  11. Polish Industry and Art at CERN

    CERN Multimedia

    2000-01-01

    On 17 October 2000 the second Polish industrial and technological exhibition opened at CERN. The first one was held five years ago and nine of the companies that were present then have come back again this year. Six of those companies were awarded contracts with CERN in 1995. Three Polish officials were present at the Opening Ceremony today: Mrs Malgorzata Kozlowska, Under-secretary of State in the State Committee for Scientific Research, Mr Henryk Ogryczak, Under-secretary of State in Ministry of Economy and Prof. Jerzy Niewodniczanski, President of National Atomic Energy Agency. Professor Luciano Maiani welcomed the Polish delegation to CERN and stressed the important contribution of Polish scientists and industrialists to the work of the laboratory. Director General Luciano Maiani (back left) and head of SPL division Karl-Heinz Kissler (back right) visit the Poland at CERN exhibition… The exhibition offers Polish companies the opportunity to establish professional contacts with CERN. Nineteen companies...

  12. Industrial safety glasses -- an update.

    Science.gov (United States)

    Sherr, A E

    1980-02-01

    A review is presented of recent significant developments in industrial protective eyewear. Many of these developments apply to everyday practice. The new plastic protective, prescription, and plano lenses are discussed, and their merits presented. Needs for protection in the ultraviolet and near-infrared portions of the electromagnetic spectrum are described. It is shown that such spectral protection is now available in plastic lenses, but care must be taken to insure that the plastic has the required ultraviolet and near-infrared absorption. Eye protection standards have been improved. Specific changes in the standards are discussed.

  13. Industrial safety management with emphasis on construction safety

    International Nuclear Information System (INIS)

    Bhattacharya, R.

    2016-01-01

    Safety professionals, line managers, team leaders and concerned workers today eagerly discuss to find out the best safety approach for their workplace. Some research suggested that behaviour based and comprehensive ergonomics approaches lead in average reduction of injuries. This article discusses 'the science and engineering' behind improvement in industrial safety aspects particularly at construction sites through various safety approaches. A high degree of commitment to safety by the project management and rigorous and proactive measures are essential to prevent accidents at construction sites particularly in DAE units because of its sensitivity. Persistent efforts by the project management are needed for sustainable and committed safety at work place. The number of fatalities occurring from construction work in DAE units is sometimes disturbing and fall of person from height and through openings are the major causes for serious accidents

  14. Advances in industrial ergonomics and safety II

    Energy Technology Data Exchange (ETDEWEB)

    Das, B [ed.; Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering

    1990-01-01

    135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

  15. Advances in industrial ergonomics and safety II

    Energy Technology Data Exchange (ETDEWEB)

    Das, B. (ed.) (Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering)

    1990-01-01

    135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

  16. Radiation Safety in Industrial Radiography. Specific Safety Guide (Spanish Edition); Seguridad radiologica en la radiografia industrial

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-12-15

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

  17. The electron accelerator in industry - safety aspects

    International Nuclear Information System (INIS)

    Kirthi, K.N.

    1993-01-01

    Electron beam accelerators are being used in increasing numbers in a variety of important applications. Commercial uses include radiography, food preservation, product sterilisation and radiation processing of materials. Since most of the industrial applications involve products, some that can be treated with electrons and others that require photons, electron accelerators serve this dual purpose economically. Although industrial accelerators are now regarded as standard products, finished installations show considerable diversity, reflecting the users, needs and planning. Because of the high radiation output, proper planning regarding safety is warranted. This paper discusses the hazards, safety and planning required during design and operation of the electron beam accelerators. (author). 4 refs., 1 fig

  18. Art Education and Industry: A Case Study of Success.

    Science.gov (United States)

    Schultz, Larry

    1984-01-01

    An industry-funded, school-based project which developed a sequential system of instruction for teaching watercolor to elementary students is described. This model of collaboration between a public school system and a corporation illustrates what can be done to improve art instruction. (RM)

  19. Industrial Arts: Vehicle for Career Awareness in the Elementary School

    Science.gov (United States)

    Wircenski, Jerry L.; Fales, James F.

    1977-01-01

    The authors propose the use of industrial arts as a vehicle for providing career awareness in the elementary school. They cite a 2-week integrated unit in manufacturing conducted at Hershey Elementary School (Lafayette, Indiana) where the curriculum encouraged second and third graders to explore the world of work. (Editor/HD)

  20. Pennsylvania's Energy Curriculum for the Secondary Grades: Industrial Arts.

    Science.gov (United States)

    Wighaman, Paul F.; Zimmerman, Earl R.

    Compiled in this guide are 23 previously published documents for use by secondary school industrial arts teachers who want to incorporate energy studies into their curricula. Over half of the entries describe energy-related projects such as fireplaces, solar water heaters, and solar ovens. Other materials presented address the place of energy in…

  1. Radiation safety in Australia's mineral sands industry

    International Nuclear Information System (INIS)

    Hughes, W.

    1989-06-01

    This brochure is part of a training package aiming to explain in simple terms what radiation is, how it affects people's lives and how, in the specific case of the mineral sand industry, the risk of ill-effects from low-level radioactivity could be effectively guarded against by simple and easily followed safety precautions. ills

  2. Industry Leader Perceptions of Workplace Safety

    Science.gov (United States)

    Dunlap, Erik Scott

    2009-01-01

    This study investigated the perceptions of workplace safety held by industry leaders who were near completion of a Master of Business Administration (MBA) degree. This was a qualitative study that utilized interpretivism as the theoretical framework. The study sought to answer four research questions. (1) How do participants conceptualize…

  3. Hazard and safety in the nuclear industry

    International Nuclear Information System (INIS)

    Tadmor, J.

    1978-01-01

    Although the number of victims in the nuclear industry has been extremely low as compared with the number of victims in other spheres of human activity society has been willing to put up with a high number of accidents resulting in few victims per accident but refuses to accept an extremely rare accident resulting in a high number of victims. The U.S. nuclear industry is spending almost 2000 dollars for each reduction of a man x rem unit and this investment raises the ''man-life value'' in the nuclear industry to 10 million dollars as compared with 10,000 to 20,000 dollars spent in other activities (roentgen, early cancer detection, etc.). To reduce the exaggerated burden placed on the nuclear industry the safety expenditures should be spread over a maximum possible range of human activities. (B.G.)

  4. Industrial radiography in the Philippines: safety concerns

    International Nuclear Information System (INIS)

    David, Jocelyn L.; Artificio, Thelma P.; Cerbolles, Justina S.; Caseria, Estrella S.; Agron, Inocencio A.

    2005-01-01

    Industrial radiography utilizes the highest activity (5.55 tera becquerel (TBq) to 7.4 TBq) among the various mobile application of radioisotopes. It is highly possible that radiographers exceed the annual dose limits for workers occupationally exposed to radiation (as prescribed in the Code of PNRI Regulations part 3) if they do not give cautious consideration to the factors that determine the radiation dose, namely: the gamma source dose rates, time distance and shielding. To enhance the safety culture among radiographers, various strategies are recommended to be undertaken by the Philippine Nuclear Research Institute as well as the licensed companies undertaking activities in industrial radiography. (Authors)

  5. High safety in the mining industry

    Energy Technology Data Exchange (ETDEWEB)

    1987-08-01

    Presents an interview in question and answer format with the deputy chairman of Gosgortekhnadzor (Committee for Supervision of Industrial Work Safety and Mining Supervision) in which he discusses two recent fatal accidents in the Yasinovskaya-Glubokaya and Chaikino coal mines and identifies areas where safety needs to be improved (more automation, protective devices, ventilation etc.). Discusses the particular problems involved with deep mining (20% of mines are now deeper than 700 m and 27 mines are deeper than 1000 m), such as fires, dust, methane, rock falls, insufficient maintenance and strata control and poor ventilation. Confirms that a large number of accidents is due to poor organization and stresses the fact the coal industry must be subjected to perestroika (restructuring) as much as other areas of society.

  6. Safety of Nanotechnology in Food Industries

    Science.gov (United States)

    Amini, Seyed Mohammad; Gilaki, Marzieh; Karchani, Mohsen

    2014-01-01

    The arrival of nanotechnology in various industries has been so rapid and widespread because of its wide-ranging applications in our daily lives. Nutrition and food service is one of the biggest industries to be affected by nanotechnology in all areas, changing even the nature of food itself. Whether it’s farming, food packaging, or the prevention of microbial contamination the major food industries have seen dramatic changes because of nanotechnology. Different nanomaterials such as nanopowders, nanotubes, nano-fibers, quantum dots, and metal and metal-oxide nanoparticles are globally produced in large quantities due to their broad applicability in food-related industries. Because of the unique properties of nanostructures and nanomaterials – such as a large surface area, high activity, and small size, there is some concern about the potential for harmful adverse effects of used nanomaterials on health or the environment. However, because of tremendous advances in different industries, this concern may be unnecessary. This paper presents some uses of nanomaterials in food and related industries and their possible side-effects. This review covers the various aspects of nanomaterials and their impact on human exposure, safety, and environmental concerns. PMID:25763176

  7. Safety Criteria for the Private Spaceflight Industry

    Science.gov (United States)

    Quinn, Andy; Maropoulos, Paul

    2010-09-01

    The Federal Aviation Administration(FAA) Office of Commercial Space Transportation(AST) has set specific rules and generic guidelines to cover experimental and operational flights by industry forerunners such as Virgin Galactic and XCOR. One such guideline Advisory Circular(AC) 437.55-1[1] contains exemplar hazard analyses for spacecraft designers and operators to follow under an experimental permit. The FAA’s rules and guidelines have also been ratified in a report to the United States Congress, Analysis of Human Space Flight Safety[2] which cites that the industry is too immature and has ‘insufficient data’ to be proscriptive and that ‘defining a minimum set of criteria for human spaceflight service providers is potentially problematic’ in order not to ‘stifle the emerging industry’. The authors of this paper acknowledge the immaturity of the industry and discuss the problematic issues that Design Organisations and Operators now face.

  8. The art of regression modeling in road safety

    CERN Document Server

    Hauer, Ezra

    2015-01-01

    This unique book explains how to fashion useful regression models from commonly available data to erect models essential for evidence-based road safety management and research. Composed from techniques and best practices presented over many years of lectures and workshops, The Art of Regression Modeling in Road Safety illustrates that fruitful modeling cannot be done without substantive knowledge about the modeled phenomenon. Class-tested in courses and workshops across North America, the book is ideal for professionals, researchers, university professors, and graduate students with an interest in, or responsibilities related to, road safety. This book also: · Presents for the first time a powerful analytical tool for road safety researchers and practitioners · Includes problems and solutions in each chapter as well as data and spreadsheets for running models and PowerPoint presentation slides · Features pedagogy well-suited for graduate courses and workshops including problems, solutions, and PowerPoint p...

  9. Days on safety of industrial radiographic controls

    International Nuclear Information System (INIS)

    2008-01-01

    This program is divided in three parts: the context and the regulations, the preparation and the implementation, the tools of prevention and the initiatives and the perspectives.In the first part devoted to the context and regulation are: the context by the Authority of nuclear safety (A.S.N.), the regulation referential, the transport of gamma-graphs; in the second part are the distribution of liabilities, materials and associated requirements, the feedback of incidents and exploitation of it, training and base requirements, works of S.F.R.P./C.O.F.R.E.N.D. and the A.S.N. position; the third part includes help to evaluation of risks at working places of industry radiologists, dosimetry study of a working place, guide to evaluate oneself; the fourth part devoted to the initiatives and the perspectives are: regional experiences charters of good practices in industry radiography, integration of works and deployment by the members of the C.O.F.R.E.N.D., perspectives in matter of prevention of occupational risks in the area of industry radiography. (N.C.)

  10. Using game theory to improve safety within chemical industrial parks

    CERN Document Server

    Reniers, Genserik

    2013-01-01

    Though the game-theoretic approach has been vastly studied and utilized in relation to economics of industrial organizations, it has hardly been used to tackle safety management in multi-plant chemical industrial settings. Using Game Theory for Improving Safety within Chemical Industrial Parks presents an in-depth discussion of game-theoretic modelling which may be applied to improve cross-company prevention and -safety management in a chemical industrial park.   By systematically analyzing game-theoretic models and approaches in relation to managing safety in chemical industrial parks, Using Game Theory for Improving Safety within Chemical Industrial Parks explores the ways game theory can predict the outcome of complex strategic investment decision making processes involving several adjacent chemical plants. A number of game-theoretic decision models are discussed to provide strategic tools for decision-making situations.   Offering clear and straightforward explanations of methodologies, Using Game Theor...

  11. System safety education focused on industrial engineering

    Science.gov (United States)

    Johnston, W. L.; Morris, R. S.

    1971-01-01

    An educational program, designed to train students with the specific skills needed to become safety specialists, is described. The discussion concentrates on application, selection, and utilization of various system safety analytical approaches. Emphasis is also placed on the management of a system safety program, its relationship with other disciplines, and new developments and applications of system safety techniques.

  12. Application of VR and HF technologies for improving industrial safety

    NARCIS (Netherlands)

    Loupos, K.; Christopoulos, D.; Vezzadini, L.; Hoekstra, W.; Salem, W.; Chung, P.W.H.

    2007-01-01

    Safety in industrial environments can nowadays be regarded as an issue of major importance. Large amounts of money are spent by industries on this matter in order to improve safety in all levels, by reducing risks of causing damages to equipment, human injuries or even fatalities. Virtual Reality

  13. Safety climate practice in Korean manufacturing industry

    International Nuclear Information System (INIS)

    Baek, Jong-Bae; Bae, Sejong; Ham, Byung-Ho; Singh, Karan P.

    2008-01-01

    Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended

  14. Safety climate practice in Korean manufacturing industry.

    Science.gov (United States)

    Baek, Jong-Bae; Bae, Sejong; Ham, Byung-Ho; Singh, Karan P

    2008-11-15

    Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended.

  15. Safety climate practice in Korean manufacturing industry

    Energy Technology Data Exchange (ETDEWEB)

    Baek, Jong-Bae [Department of Safety Engineering, Chungju National University, Chungju 380-702 (Korea, Republic of); Bae, Sejong [Department of Biostatistics, University of North Texas Health Science Center, 3500 Camp Bowie Boulevard, Fort Worth, TX 76107 (United States)], E-mail: sbae@hsc.unt.edu; Ham, Byung-Ho [Department of Industrial Safety, Ministry of Labor (Korea, Republic of); Singh, Karan P. [Department of Biostatistics, University of North Texas Health Science Center, 3500 Camp Bowie Boulevard, Fort Worth, TX 76107 (United States)

    2008-11-15

    Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended.

  16. OCCUPATIONAL HEALTH AND SAFETY ISSUES IN VICTORIAN CONSTRUCTION INDUSTRY, AUSTRALIA

    OpenAIRE

    M. Asad, Abdurrahman

    2010-01-01

    The construction industry has one of the highest injury ratios of all Australian industries. Individuals employed on the construction industries find themselves confronted with dangerous and life-threatening work conditions. However, it appears that the trend in Occupational Health and Safety (OHS) performance of construction industry has improved consistently compared with the other industries. The enforcement of OHS law and regulation, and the outcome of authority function to assist and pro...

  17. Development of Safety Kit for Industrial Radiography Application

    International Nuclear Information System (INIS)

    Mohd Noorul Ikhsan Ahmad; Amry Amin Abas

    2011-01-01

    A safety kit for industrial radiography has been developed. The safety kit that consist of a set of technical rod and various size of base that can be used in radiograph of pipe with diameter between half and one and half inch with utilization of collimator. With the kit, radiographers will not having anymore problem to use collimator in their work. The paper discuss about the technical measures of the safety kit and the importance of introducing it to the industry. (author)

  18. On the future of safety in the manufacturing industry

    OpenAIRE

    Reniers, G.

    2017-01-01

    Abstract: This paper argues that a new paradigm is needed in the manufacturing industry to further substantially advance safety as part of the industry 4.0 concept. The different domains that need to be focused upon are Cluster-thinking and cooperation, High transparency and efficient inspections, Education and training, Security integration, and Safety innovation. Since society has fundamentally changed over the last two decades, revolutionizing safety via these domains is truly needed in th...

  19. Behavioral Safety in the Food Services Industry: Challenges and Outcomes

    Science.gov (United States)

    Lebbon, Angela; Sigurdsson, Sigurdur Oli; Austin, John

    2012-01-01

    During the course of a 6-year behavioral safety consult at a food and drink industry site, data were collected on the number of Occupational Safety Health Administration (OSHA) recordable incidents, number of lost and restricted days, and number of peer safety observations. Employees were trained to identify safe and unsafe behavior, conduct peer…

  20. Industrial safety and applied health physics. Annual report for 1977

    International Nuclear Information System (INIS)

    Auxier, J.A.; Davis, D.M.

    1978-06-01

    Progress is reported on the following: radiation monitoring with regard to personnel monitoring and health physics instrumentation; environs surveillance with regard to atmospheric monitoring, water monitoring, radiation background measurements, and soil and grass samples; radiation and safety surveys with regard to laboratory operations monitoring, radiation incidents, and laundry monitoring; industrial safety and special projects with regard to accident analysis, disabling injuries, and safety awards

  1. Safety and security profiles of industry networks used in safety- critical applications

    Directory of Open Access Journals (Sweden)

    Mária FRANEKOVÁ

    2008-01-01

    Full Text Available The author describes the mechanisms of safety and security profiles of industry and communication networks used within safety – related applications in technological and information levels of process control recommended according to standards IEC 61784-3,4. Nowadays the number of vendors of the safety – related communication technologies who guarantees besides the standard communication, the communication amongst the safety – related equipment according to IEC 61508 is increasing. Also the number of safety – related products is increasing, e. g. safety Fieldbus, safety PLC, safety curtains, safety laser scanners, safety buttons, safety relays and other. According to world survey the safety Fieldbus denoted the highest growth from all manufactured safety products.The main part of this paper is the description of the safety-related Fieldbus communication system, which has to guaranty Safety Integrity Level.

  2. Preliminary study on improving safety culture in Malaysian nuclear industries

    International Nuclear Information System (INIS)

    Ibrahim, Sabariah Kader; Lee, Y. E.

    2012-01-01

    This paper presents preliminary study on safety culture and its implementation in Malaysian nuclear industries by realizing the importance of safety culture; identification of important safety culture attributes; safety culture assessment and the practices to incorporate the identified safety culture attributes in organization. The first section of this paper explains the terms and definitions related to safety culture. Second, for the realization of importance of safety culture in organization, the international operational experiences emphasizing the importance of safety culture are described. Third, important safety culture attributes which are frequently cited in literature are provided. Fourth, methods to assess safety culture in operating organization are described. Finally, the practices to enhance the safety culture in an organization are discussed

  3. Preliminary study on improving safety culture in Malaysian nuclear industries

    Energy Technology Data Exchange (ETDEWEB)

    Ibrahim, Sabariah Kader [KAIST, Daejeon (Korea, Republic of); Lee, Y. E. [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2012-10-15

    This paper presents preliminary study on safety culture and its implementation in Malaysian nuclear industries by realizing the importance of safety culture; identification of important safety culture attributes; safety culture assessment and the practices to incorporate the identified safety culture attributes in organization. The first section of this paper explains the terms and definitions related to safety culture. Second, for the realization of importance of safety culture in organization, the international operational experiences emphasizing the importance of safety culture are described. Third, important safety culture attributes which are frequently cited in literature are provided. Fourth, methods to assess safety culture in operating organization are described. Finally, the practices to enhance the safety culture in an organization are discussed.

  4. North Dakota Senior High Industrial Arts Program of Studies--Level II. Research Series No. 80.

    Science.gov (United States)

    North Dakota State Board for Vocational Education, Bismarck. Research Coordinating Unit.

    This industrial arts program of a studies guide is the product of a research project designed to (1) ascertain programs and curricula trends of senior high school industrial arts in the fifty states, (2) develop a philosophical rationale for senior high schools in North Dakota secondary schools, and (3) develop a master plan and program of study…

  5. Safety: predominant task in oil and petrochemical industry

    Energy Technology Data Exchange (ETDEWEB)

    Zuern, G.

    1977-01-01

    Based on the history of accident statistics in the last years the economic aspects of safety are indicated. Research projects which are discussed in the DGMK-Committee 'Safety in Process Industries' are reported on: statistics concerning the accident situation in the oil industry, research of electrostatic loading of oil products being pumped under operating conditions, evaluation of fire fighting requirements in the oil industry, and the development of a European Model Code of Safe Practice in Oil Installations.

  6. Patterns of patient safety culture: a complexity and arts-informed project of knowledge translation.

    Science.gov (United States)

    Mitchell, Gail J; Tregunno, Deborah; Gray, Julia; Ginsberg, Liane

    2011-01-01

    The purpose of this paper is to describe patterns of patient safety culture that emerged from an innovative collaboration among health services researchers and fine arts colleagues. The group engaged in an arts-informed knowledge translation project to produce a dramatic expression of patient safety culture research for inclusion in a symposium. Scholars have called for a deeper understanding of the complex interrelationships among structure, process and outcomes relating to patient safety. Four patterns of patient safety culture--blinding familiarity, unyielding determination, illusion of control and dismissive urgency--are described with respect to how they informed creation of an arts-informed project for knowledge translation.

  7. Industrial Personal Computer based Display for Nuclear Safety System

    International Nuclear Information System (INIS)

    Kim, Ji Hyeon; Kim, Aram; Jo, Jung Hee; Kim, Ki Beom; Cheon, Sung Hyun; Cho, Joo Hyun; Sohn, Se Do; Baek, Seung Min

    2014-01-01

    The safety display of nuclear system has been classified as important to safety (SIL:Safety Integrity Level 3). These days the regulatory agencies are imposing more strict safety requirements for digital safety display system. To satisfy these requirements, it is necessary to develop a safety-critical (SIL 4) grade safety display system. This paper proposes industrial personal computer based safety display system with safety grade operating system and safety grade display methods. The description consists of three parts, the background, the safety requirements and the proposed safety display system design. The hardware platform is designed using commercially available off-the-shelf processor board with back plane bus. The operating system is customized for nuclear safety display application. The display unit is designed adopting two improvement features, i.e., one is to provide two separate processors for main computer and display device using serial communication, and the other is to use Digital Visual Interface between main computer and display device. In this case the main computer uses minimized graphic functions for safety display. The display design is at the conceptual phase, and there are several open areas to be concreted for a solid system. The main purpose of this paper is to describe and suggest a methodology to develop a safety-critical display system and the descriptions are focused on the safety requirement point of view

  8. Industrial Personal Computer based Display for Nuclear Safety System

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ji Hyeon; Kim, Aram; Jo, Jung Hee; Kim, Ki Beom; Cheon, Sung Hyun; Cho, Joo Hyun; Sohn, Se Do; Baek, Seung Min [KEPCO, Youngin (Korea, Republic of)

    2014-08-15

    The safety display of nuclear system has been classified as important to safety (SIL:Safety Integrity Level 3). These days the regulatory agencies are imposing more strict safety requirements for digital safety display system. To satisfy these requirements, it is necessary to develop a safety-critical (SIL 4) grade safety display system. This paper proposes industrial personal computer based safety display system with safety grade operating system and safety grade display methods. The description consists of three parts, the background, the safety requirements and the proposed safety display system design. The hardware platform is designed using commercially available off-the-shelf processor board with back plane bus. The operating system is customized for nuclear safety display application. The display unit is designed adopting two improvement features, i.e., one is to provide two separate processors for main computer and display device using serial communication, and the other is to use Digital Visual Interface between main computer and display device. In this case the main computer uses minimized graphic functions for safety display. The display design is at the conceptual phase, and there are several open areas to be concreted for a solid system. The main purpose of this paper is to describe and suggest a methodology to develop a safety-critical display system and the descriptions are focused on the safety requirement point of view.

  9. Industrial tomography applied to reactor safety

    International Nuclear Information System (INIS)

    Kruger, R.P.

    1977-01-01

    Work has begun which explores the use of Computed Axial Tomography (CAT), boundary detection, and internal surface reconstruction techniques in industrial nondestructive testing applications. This initial work is intended to inform the reader of the existence and interrelated nature of these techniques through the use of a realistic simulation of an industrial inspection problem

  10. Road safety and trade and industry.

    NARCIS (Netherlands)

    2014-01-01

    Trade and industry mostly experience the negative consequences of crashes, but sometimes the consequences are positive. The negative consequences of road traffic crashes include loss of personnel and damage to vehicles. Some other industries, such as damage repair companies, on the other hand,

  11. Health and safety record of the nuclear industry

    International Nuclear Information System (INIS)

    Carter, M.W.; Carruthers, E.; Button, J.C.E.

    1975-09-01

    This paper examines the claim of the nuclear industry to have an excellent safety record, in terms of health and accident records of workers in the industry. It does not consider accidents which have not resulted in harm to the workers' health. The nuclear industry is considered to include all work with ionising radiations and radioactive materials, in education, research, medicine and industry. Since 'safety' is not an absolute concept, comparisons are made with the published records of other industries, and a study is made of the performance of the nuclear industry in relation to its own safety criteria. Data are presented on the radiation exposure of nuclear workers in Europe, America, India and Australia, in relation to the internationally recommended limits, and there is some discussion of the risks involved in these limits. The death rate in parts of the nuclear industry in America, the United Kingdom, and Australia is presented and compared with the death rate for other industries in those countries, and a listing is made of deaths caused by radiation in the period 1945 to 1968. Injury rates for the US and Australian nuclear industries are also compared with the injury rates for other industries in these countries. Consideration is given to the safety record of individual components of the nuclear industry (using the wide definition of this industry given above), special attention being given to health records of uranium miners, plutonium workers and radiologists. Although there are difficulties in obtaining sufficiently detailed information of this kind it is considered that the data presented, relative to any reasonable standard, demonstrate that the nuclear industry has a safety record to be proud of. (author)

  12. Radiation safety in nuclear industry in retrospect and perspective

    International Nuclear Information System (INIS)

    Pan Ziqiang

    1993-01-01

    More than 30 years have passed since the starting up of nuclear industry in China from the early 1950's. Over the past 30-odd years, nuclear industry has always kept a good record in China thanks to the policy of 'quality first, safety first' clearly put forward for nuclear industry from the outset and a lot of suitable effective measures taken over that period. Internationally, there is rapid progress in radiation protection and nuclear safety (hereafter refereed to as radiation safety) and a number of new concepts in the field of radiation protection have been advanced. Nuclear industry is developing based on the international standardization. To ensure the further development of nuclear utility, radiation safety needs to be further strengthened

  13. Multilevel model of safety climate for furniture industries.

    Science.gov (United States)

    Rodrigues, Matilde A; Arezes, Pedro M; Leão, Celina P

    2015-01-01

    Furniture companies can analyze their safety status using quantitative measures. However, the data needed are not always available and the number of accidents is under-reported. Safety climate scales may be an alternative. However, there are no validated Portuguese scales that account for the specific attributes of the furniture sector. The current study aims to develop and validate an instrument that uses a multilevel structure to measure the safety climate of the Portuguese furniture industry. The Safety Climate in Wood Industries (SCWI) model was developed and applied to the safety climate analysis using three different scales: organizational, group and individual. A multilevel exploratory factor analysis was performed to analyze the factorial structure. The studied companies' safety conditions were also analyzed. Different factorial structures were found between and within levels. In general, the results show the presence of a group-level safety climate. The scores of safety climates are directly and positively related to companies' safety conditions; the organizational scale is the one that best reflects the actual safety conditions. The SCWI instrument allows for the identification of different safety climates in groups that comprise the same furniture company and it seems to reflect those groups' safety conditions. The study also demonstrates the need for a multilevel analysis of the studied instrument.

  14. Safety applications of computer based systems for the process industry

    International Nuclear Information System (INIS)

    Bologna, Sandro; Picciolo, Giovanni; Taylor, Robert

    1997-11-01

    Computer based systems, generally referred to as Programmable Electronic Systems (PESs) are being increasingly used in the process industry, also to perform safety functions. The process industry as they intend in this document includes, but is not limited to, chemicals, oil and gas production, oil refining and power generation. Starting in the early 1970's the wide application possibilities and the related development problems of such systems were recognized. Since then, many guidelines and standards have been developed to direct and regulate the application of computers to perform safety functions (EWICS-TC7, IEC, ISA). Lessons learnt in the last twenty years can be summarised as follows: safety is a cultural issue; safety is a management issue; safety is an engineering issue. In particular, safety systems can only be properly addressed in the overall system context. No single method can be considered sufficient to achieve the safety features required in many safety applications. Good safety engineering approach has to address not only hardware and software problems in isolation but also their interfaces and man-machine interface problems. Finally, the economic and industrial aspects of the safety applications and development of PESs in process plants are evidenced throughout all the Report. Scope of the Report is to contribute to the development of an adequate awareness of these problems and to illustrate technical solutions applied or being developed

  15. Operation safety of complex industrial systems. Main concepts

    International Nuclear Information System (INIS)

    Zwingelstein, G.

    2009-01-01

    Operation safety consists in knowing, evaluating, foreseeing, measuring and mastering the technological system and human failures in order to avoid their impacts on health and people's safety, on productivity, and on the environment, and to preserve the Earth's resources. This article recalls the main concepts of operation safety: 1 - evolutions in the domain; 2 - failures, missions and functions of a system and of its components: functional failure, missions and functions, industrial processes, notions of probability; 3 - basic concepts and operation safety: reliability, unreliability, failure density, failure rate, relations between them, availability, maintainability, safety. (J.S.)

  16. Safety practices in Jordanian manufacturing enterprises within industrial estates.

    Science.gov (United States)

    Khrais, Samir; Al-Araidah, Omar; Aweisi, Assaf Mohammad; Elias, Fadia; Al-Ayyoub, Enas

    2013-01-01

    This paper investigates occupational health and safety practices in manufacturing enterprises within Jordanian industrial estates. Response rates were 21.9%, 58.6% and 70.8% for small, medium and large sized enterprises, respectively. Survey results show that most companies comply with state regulations, provide necessary facilities to enhance safety and provide several measures to limit and control hazards. On the negative side, little attention is given to safety training that might be due to the lack of related regulations and follow-up, financial limitations or lack of awareness on the importance of safety training. In addition, results show that ergonomic hazards, noise and hazardous chemicals are largely present. Accident statistics show that medium enterprises have the highest accident cases per enterprise, and chemical industries reported highest total number of accidents per enterprise. The outcomes of this study establish a base for appropriate safety recommendations to enhance the awareness and commitment of companies to appropriate safety rules.

  17. Survey of Safety Climate in a Petrochemical Industry in Mahshahr

    Directory of Open Access Journals (Sweden)

    Y. Shokoohi

    2012-07-01

    Results and Discussion: Average score of the industry's safety climate was obtained 5.9. Of 17 studied dimensions, 9 dimensions were weak (score less than 6. Lowest score were related to Event & Accident and Change management dimensions. Highest score were related to Individual priorities and need for safety (8.65. Generally relationship between individual variables (ages, work experience, education and safety climate were not significant (P>0.05. Conclusion: Generally one can conclude that individual variables such as age, education and experience have not significant effect on safety climate. It seems that top management forms the organizational climate and consequently safety climate. It reaffirms the basic principle of senior management commitment to safety and its role in preventing accidents. Thus safety climate can be used as a good method for assessing Occupational Health and Safety Management Performance.

  18. Radiation Safety in Industrial Radiography. Specific Safety Guide (French Edition); Surete radiologique en radiographie industrielle

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-05-15

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in Horizontal-Ellipsis shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

  19. Evaluation of safety practices and performance in a brewery industry ...

    African Journals Online (AJOL)

    Evaluation of safety practices and performance in a brewery industry in Nigeria between 2000 – 2007. ... Journal of Applied Sciences and Environmental Management ... The study revealed that a total of 156 accidents were prevented in the period of the safety programme which translates to an average of 19.45 per year.

  20. Usage of Safety Gloves in the Gold Mining Industry

    CSIR Research Space (South Africa)

    Scheepers, JCE

    1978-10-01

    Full Text Available The safety departments of 31 mines were visited, and the data obtained was used to determine to what extent safety gloves were being used in the gold mining industry. The frequency of occurrence of hand injuries amongst black workers of the gold...

  1. Human and Organisational Safety Barriers in the Oil & Gas Industry

    International Nuclear Information System (INIS)

    Nystad, E.; Szőke, I.

    2016-01-01

    The oil & gas industry is a safety-critical industry where errors or accidents may potentially have severe consequences. Offshore oil & gas installations are complex technical systems constructed to pump hydrocarbons from below the seabed, process them and pipe them to onshore refineries. Hydrocarbon leaks may lead to major accidents or have negative environmental impacts. The industry must therefore have a strong focus on safety. Safety barriers are devices put into place to prevent or reduce the effects of unwanted incidents. Technical barriers are one type of safety barrier, e.g., blow-out preventers to prevent uncontrolled release of hydrocarbons from a well. Human operators may also have an important function in maintaining safety. These human operators are part of a larger organisation consisting of different roles and responsibilities and with different mechanisms for ensuring safety. This paper will present two research projects from the Norwegian oil & gas industry that look at the role of humans and organisations as safety barriers. The first project used questionnaire data to investigate the use of mindful safety practices (safety-promoting work practices intended to prevent or interrupt unwanted events) and what contextual factors may affect employees’ willingness to use these safety practices. Among the findings was that employees’ willingness to use mindful safety practices was affected more by factors on a group level than factors at an individual or organisational level, and that the factors may differ depending on what is the object of a practice—the employee or other persons. It was also suggested that employees’ willingness to use mindful safety practices could be an indicator used in the assessment of the safety level on oil & gas installations. The second project is related to organisational safety barriers against major accidents. This project was based on a review of recent incidents in the Norwegian oil & gas industry, as well as

  2. Management of health, safety and environment in process industry

    DEFF Research Database (Denmark)

    Duijm, Nijs Jan; Fiévez, C.; Gerbec, M.

    2008-01-01

    The present status of industrial HSE management in a number of EU member states is reviewed, with a focus on the integration of health, safety and environment in single management systems. The review provides insight into the standards and paradigms adopted by industry, and it identifies trends...

  3. Biosensor: an emerging safety tool for meat industry.

    Science.gov (United States)

    Singh, Pradeep Kumar; Jairath, Gauri; Ahlawat, Satyavir Singh; Pathera, Ashok; Singh, Prashant

    2016-04-01

    The meat industry associated with the health hazards like deadly pathogens, veterinary drugs, pesticide residues, toxins and heavy metals is in need of a tool to tackle the awful situation and ensure safer product to consumer. The growth in the industry, global trade scenario, stringent laws and consumer awareness has placed an extra onus on the meat industry to meet out the expectations and demands. Biosensors are the latest tool of detection in the fast growing industries including the food industry. Hence an attempt is envisaged here to review the possibility of harnessing biosensors as tool of safety to safe guard the consumer health and address safety issues in reference to the common threats of concern in the meat industry.

  4. Radiological safety aspects of industrial radiography

    International Nuclear Information System (INIS)

    Hanekom, A.P.

    1983-01-01

    Industrial radiography and especially gamma-radiography, has established itself as a very powerful tool in non-destructive testing. Unfortunately there is an amount of risk attached to the use of industrial radiography. The primary causes of radiography accidents include: working conditions, equipment failure and lack of supervisory control. To alleviate the radiological risks involved with gamma-radiography, the Atomic Energy Corporation (AEC) has imposed various conditions for the possession, use, and conveyance of radioactive material. This includes personnel training and equipment specifications

  5. Pennsylvania Classroom Guide to Safety in the Visual Arts.

    Science.gov (United States)

    Oltman, Debra L.

    Exposure to certain art materials can damage the human body. Some of these materials are identified together with factors that influence exposure, including duration, frequency, and environmental conditions. Responsibility for providing a safe working environment for the creation of visual arts in the classroom lies with the instructor, principal,…

  6. Radiation safety in industrial applications of nuclear techniques

    International Nuclear Information System (INIS)

    Lam, E.S.

    1981-01-01

    The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise. (author)

  7. Radiation safety in industrial applications of nuclear techniques

    Energy Technology Data Exchange (ETDEWEB)

    Lam, E S [Ministry of Health, Kuala Lumpur (Malaysia)

    1981-01-01

    The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise.

  8. Gentrification, displacement and the arts: Untangling the relationship between arts industries and place change

    OpenAIRE

    Grodach, C.; Foster, N.; Murdoch, J.

    2016-01-01

    The arts have long played a role in debates around gentrification and displacement, yet their roles and impacts as change agents are not clear-cut. According to the standard account, artists facilitate gentrification and ultimately engender the displacement of lower income households, but more recent research complicates the accepted narrative. This article seeks to untangle the relationship between the arts, gentrification and displacement through a statistical study of neighbourhood-level a...

  9. Arts, Crafts and Indigenous Industries in Nigeria | Yakubu | Journal ...

    African Journals Online (AJOL)

    The paper is illustrative of the cultural wealth of Nigeria in terms of arts and crafts. It provides a descriptive picture of the various characteristics of the genres in the past and present and in traditional as well as modern Nigerian communities. It functions within religious, intellectual, and socio-economic contexts. Hence ...

  10. Safety, economic incentives and insurance in the Norwegian petroleum industry

    International Nuclear Information System (INIS)

    Osmundsen, Petter; Aven, Terje; Erik Vinnem, Jan

    2008-01-01

    There is an increased use of key performance indicators and incentive schemes in the petroleum industry. Applying modern incentive theory, we explore what implications this management trend has for injury and major accident prevention efforts and safety. Can economic incentives be designed for accident prevention activities? In cases where this is not possible, what are the challenges for the safety efforts? In particular, how are safety efforts affected by enhanced economic incentives for other performance dimensions like production and rate of return? Can safety be neglected? What remedies are available?

  11. Safety climate and safety behaviors in the construction industry: The importance of co-workers commitment to safety.

    Science.gov (United States)

    Schwatka, Natalie V; Rosecrance, John C

    2016-06-16

    There is growing empirical evidence that as safety climate improves work site safety practice improve. Safety climate is often measured by asking workers about their perceptions of management commitment to safety. However, it is less common to include perceptions of their co-workers commitment to safety. While the involvement of management in safety is essential, working with co-workers who value and prioritize safety may be just as important. To evaluate a concept of safety climate that focuses on top management, supervisors and co-workers commitment to safety, which is relatively new and untested in the United States construction industry. Survey data was collected from a cohort of 300 unionized construction workers in the United States. The significance of direct and indirect (mediation) effects among safety climate and safety behavior factors were evaluated via structural equation modeling. Results indicated that safety climate was associated with safety behaviors on the job. More specifically, perceptions of co-workers commitment to safety was a mediator between both management commitment to safety climate factors and safety behaviors. These results support workplace health and safety interventions that build and sustain safety climate and a commitment to safety amongst work teams.

  12. Control of Industrial Safety Based on Dynamic Characteristics of a Safety Budget-Industrial Accident Rate Model in Republic of Korea.

    Science.gov (United States)

    Choi, Gi Heung; Loh, Byoung Gook

    2017-06-01

    Despite the recent efforts to prevent industrial accidents in the Republic of Korea, the industrial accident rate has not improved much. Industrial safety policies and safety management are also known to be inefficient. This study focused on dynamic characteristics of industrial safety systems and their effects on safety performance in the Republic of Korea. Such dynamic characteristics are particularly important for restructuring of the industrial safety system. The effects of damping and elastic characteristics of the industrial safety system model on safety performance were examined and feedback control performance was explained in view of cost and benefit. The implications on safety policies of restructuring the industrial safety system were also explored. A strong correlation between the safety budget and the industrial accident rate enabled modeling of an industrial safety system with these variables as the input and the output, respectively. A more effective and efficient industrial safety system could be realized by having weaker elastic characteristics and stronger damping characteristics in it. A substantial decrease in total social cost is expected as the industrial safety system is restructured accordingly. A simple feedback control with proportional-integral action is effective in prevention of industrial accidents. Securing a lower level of elastic industrial accident-driving energy appears to have dominant effects on the control performance compared with the damping effort to dissipate such energy. More attention needs to be directed towards physical and social feedbacks that have prolonged cumulative effects. Suggestions for further improvement of the safety system including physical and social feedbacks are also made.

  13. Safety, feasibility and efficacy of a rapid ART initiation in pregnancy ...

    African Journals Online (AJOL)

    Safety, feasibility and efficacy of a rapid ART initiation in pregnancy pilot programme in Cape Town, South Africa. S Black, R Zulliger, L Myer, R Marcus, S Jeneker, R Taliep, D Pienaar, R Wood, L-G Bekker ...

  14. Industrial Design and Craftwork. A View from Art History

    OpenAIRE

    Anderson, Ibar Federico

    2015-01-01

    La diferencia histórica entre el diseño industrial y la artesanía en el proyecto y en el diseño de muebles que se ha debatido a nivel académico en distintas universidades nacionales, es la correspondencia establecida entre el diseño y la tecnología a partir de la Revolución Industrial de Inglaterra. Pero a fines del siglo XX, este paradigma propio del Movimiento Moderno ha entrado en crisis en las sociedades más desarrolladas. The historical difference between industrial design and craftsm...

  15. Industrial safety in a nuclear decommissioning environment observations and lessons learned

    International Nuclear Information System (INIS)

    Brevig, D.

    2008-01-01

    Decommissioning activities present unusual and unexpected workplace safety challenges that go far beyond the traditional experience of nuclear power plant managers. A blend of state-of-the-art safety program management tools along with new and practical applications are required to ensure high industrial safety performance. The demanding and rigorously applied nuclear safety engineering standards that are accepted as normal and routine in the operation of a nuclear power facility, should transform as an industrial safety standard during the non-operating period of decommissioning. In addition, historical measures of non-nuclear industrial safety injury rates would or should not be acceptable safety behaviors during a nuclear decommissioning project. When complex projects, such as the decommissioning of a nuclear generating facility are undertaken, the workforce brings experience, qualifications, and assumptions to the project. The overall multi-year general schedule is developed, with more schedule details, for example, for the nearest rolling 12-18 months. Methods are established for the selection of contractors to assist in areas that are not normal tasks for the facility workforce, whose normal activity is managing and operating a nuclear generating station. However, it is critical to manage those contractors to the agreed work scope to ensure success is maintained by both parties, e.g. the job gets done, on schedule, on budget, all parties are financially whole when the work is complete, and safely. The purpose of this paper is to provide a perspective of nuclear plant personal safety in the ever changing industrial environment created by the demolition of robust and often radiologically contaminated structures in a nuclear facility decommissioning project. (author)

  16. Industrial safety in a nuclear decommissioning environment observations and lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Brevig, D. [Independent Consultant, San Clemente (United States)

    2008-07-01

    Decommissioning activities present unusual and unexpected workplace safety challenges that go far beyond the traditional experience of nuclear power plant managers. A blend of state-of-the-art safety program management tools along with new and practical applications are required to ensure high industrial safety performance. The demanding and rigorously applied nuclear safety engineering standards that are accepted as normal and routine in the operation of a nuclear power facility, should transform as an industrial safety standard during the non-operating period of decommissioning. In addition, historical measures of non-nuclear industrial safety injury rates would or should not be acceptable safety behaviors during a nuclear decommissioning project. When complex projects, such as the decommissioning of a nuclear generating facility are undertaken, the workforce brings experience, qualifications, and assumptions to the project. The overall multi-year general schedule is developed, with more schedule details, for example, for the nearest rolling 12-18 months. Methods are established for the selection of contractors to assist in areas that are not normal tasks for the facility workforce, whose normal activity is managing and operating a nuclear generating station. However, it is critical to manage those contractors to the agreed work scope to ensure success is maintained by both parties, e.g. the job gets done, on schedule, on budget, all parties are financially whole when the work is complete, and safely. The purpose of this paper is to provide a perspective of nuclear plant personal safety in the ever changing industrial environment created by the demolition of robust and often radiologically contaminated structures in a nuclear facility decommissioning project. (author)

  17. Community Road Safety Initiatives for the Minerals Industry

    Directory of Open Access Journals (Sweden)

    Tim Horberry

    2013-12-01

    Full Text Available Major companies in the minerals industry are increasingly recognizing that their operations have an impact in the wider community. Regarding transportation issues, this impact extends beyond purely the safety of company vehicle fleets to consideration of Community Road Safety (CRS concerns, which address the driving, walking, and riding practices of community members in a locale with increased heavy vehicle traffic. Our assessment here of national and international trends in approaches to road safety awareness and associated road safety strategies is meant to inform companies in the minerals industry of developments that can influence the design of their road safety initiatives. The review begins by considering the overall road safety context and the dominant “safe systems” framework employed internationally. Thereafter, it considers what is typically included in CRS initiatives for the minerals industry. Three case studies are then presented to highlight approaches that feature exemplary collaboration, design, implementation, or impact. Thereafter, we analyze lessons learnt by key researchers and practitioners in the CRS field. Finally, we conclude that best CRS practices for the minerals industry rely on eleven factors, including for example collaboration with local entities and stepwise implementation.

  18. Enhancing Safety Culture in Complex Nuclear Industry Projects

    International Nuclear Information System (INIS)

    Gotcheva, N.

    2016-01-01

    This paper presents an on-going research project “Management principles and safety culture in complex projects” (MAPS), supported by the Finnish Research Programme on Nuclear Power Plant Safety 2015-2018. The project aims at enhancing safety culture and nuclear safety by supporting high quality execution of complex projects in the nuclear industry. Safety-critical industries are facing new challenges, related to increased outsourcing and complexity in technology, work tasks and organizational structures (Milch and Laumann, 2016). In the nuclear industry, new build projects, as well as modernisation projects are temporary undertakings often carried out by networks of companies. Some companies may have little experience in the nuclear industry practices or consideration of specific national regulatory requirements. In large multinational subcontractor networks, the challenge for assuring nuclear safety arises partly from the need to ensure that safety and quality requirements are adequately understood and fulfilled by each partner. Deficient project management practices and unsatisfactory nuclear safety culture in project networks have been recognised as contributing factors to these challenges (INPO, 2010). Prior evidence indicated that many recent major projects have experienced schedule, quality and financial challenges both in the nuclear industry (STUK, 2011) and in the non-nuclear domain (Ahola et al., 2014; Brady and Davies, 2010). Since project delays and quality issues have been perceived mainly as economic problems, project management issues remain largely understudied in safety research. However, safety cannot be separated from other performance aspects if a systemic view is applied. Schedule and quality challenges may reflect deficiencies in coordination, knowledge and competence, distribution of roles and responsibilities or attitudes among the project participants. It is increasingly understood that the performance of the project network in all

  19. Further activities of safety culture toward nuclear transportation industry

    International Nuclear Information System (INIS)

    Machida, Y.; Shimakura, D.

    2004-01-01

    On September 30, 1999, a criticality accident occurred at the uranium processing facility of the JCO Co. Ltd. (hereinafter referred to as ''JCO'') Tokai plant, located in Tokaimura, Ibaraki Prefecture. This was an unprecedented accident in Japan's history of peaceful use of nuclear power, resulting in three workers exposed to severe radiation, two of whom died, and the evacuation and enforced indoor confinement of local residents. Nuclear power suppliers must take personal responsibility for ensuring safety. In this connection, the electric power industry, heavy electric machinery manufacturers, fuel fabricators, and nuclear power research organizations gathered together to establish the Nuclear Safety Network (NSnet) in December 1999, based on the resolve to share and improve the level of the safety culture across the entire nuclear power industry and to assure that such an accident never occurs again. NSnet serves as a link between nuclear power enterprises, research organizations, and other bodies, based on the principles of equality and reciprocity. A variety of activities are pursued, such as diffusing a safety culture, implementing mutual evaluation among members, and exchanging safety-related information. Aiming to share and improve the safety culture throughout the entire nuclear power industry, NSnet thoroughly implements the principle of safety first, while at the same time making efforts to restore trust in nuclear power

  20. Further activities of safety culture toward nuclear transportation industry

    Energy Technology Data Exchange (ETDEWEB)

    Machida, Y.; Shimakura, D. [NSnet, Tokyo (Japan)

    2004-07-01

    On September 30, 1999, a criticality accident occurred at the uranium processing facility of the JCO Co. Ltd. (hereinafter referred to as ''JCO'') Tokai plant, located in Tokaimura, Ibaraki Prefecture. This was an unprecedented accident in Japan's history of peaceful use of nuclear power, resulting in three workers exposed to severe radiation, two of whom died, and the evacuation and enforced indoor confinement of local residents. Nuclear power suppliers must take personal responsibility for ensuring safety. In this connection, the electric power industry, heavy electric machinery manufacturers, fuel fabricators, and nuclear power research organizations gathered together to establish the Nuclear Safety Network (NSnet) in December 1999, based on the resolve to share and improve the level of the safety culture across the entire nuclear power industry and to assure that such an accident never occurs again. NSnet serves as a link between nuclear power enterprises, research organizations, and other bodies, based on the principles of equality and reciprocity. A variety of activities are pursued, such as diffusing a safety culture, implementing mutual evaluation among members, and exchanging safety-related information. Aiming to share and improve the safety culture throughout the entire nuclear power industry, NSnet thoroughly implements the principle of safety first, while at the same time making efforts to restore trust in nuclear power.

  1. Promoting safety culture in radiation industry through radiation audit

    International Nuclear Information System (INIS)

    Noriah, M.A.

    2007-01-01

    This paper illustrates the Malaysian experience in implementing and promoting effective radiation safety program. Current management practice demands that an organization inculcate culture of safety in preventing radiation hazard. The aforementioned objectives of radiation protection can only be met when it is implemented and evaluated continuously. Commitment from the workforce to treat safety as a priority and the ability to turn a requirement into a practical language is also important to implement radiation safety policy efficiently. Maintaining and improving safety culture is a continuous process. There is a need to establish a program to measure, review and audit health and safety performance against predetermined standards. This program is known as radiation safety audit and is able to reveal where and when action is needed to make improvements to the systems of controls. A structured and proper radiation self-auditing system is seen as the sole requirement to meet the current and future needs in sustainability of radiation safety. As a result safety culture, which has been a vital element on safety in many industries can be improved and promote changes, leading to good safety performance and excellence. (author)

  2. Implications of passive safety based on historical industrial experience

    International Nuclear Information System (INIS)

    Forsberg, C.W.

    1988-01-01

    In the past decade, there have been multiple proposals for applying different technologies to achieve passively safe light water reactors (LWRs). A key question for all such concepts is, ''What are the gains in safety, costs, and reliability for passive safety systems.'' Using several types of historical data, estimates have been made of gains from passive safety and operating systems, which are independent of technology. Proposals for passive safety in reactors usually have three characteristics: (1) Passive systems with no moving mechanical parts, (2) systems with far fewer components and (3) more stringent design criteria for safety-related and process systems. Each characteristic reduces the potential for an accident and may increase plant reliability. This paper addresses gains from items (1) and (2). Passive systems often allow adoption of more rigorous design criteria which would be either impossible or economically unfeasible for active systems. This important characteristic of passive safety systems cannot be easily addressed using historical industrial experience

  3. Approaching safety in the Swedish and Danish construction industry

    DEFF Research Database (Denmark)

    Grill, Martin; Grytnes, Regine; Törner, Marianne

    2015-01-01

    in accidents rates, especially in construction, and as such offer an opportunity to explore organizational and managerial issues related to safety outcomes. Methods: Semi-structured interviews were carried out with five construction managers and four construction workers in Danish and Swedish construction...... industry. The transcripts were analysed using semantic thematic analysis. Results: Seven safety related themes were distinguished, conveying safety culture differences between Swedish and Danish construction industry concerning: participatory or directive management; challenge or obey; compliance or non...... identifies seven factors perceived by the professionals as related to lower occupational accident rates in the construction industry. Engaging in participatory management, promoting long-term planning and long-term tenures, encouraging cooperation, cautiousness and compliance to rules as well as challenging...

  4. Considerations about radiological safety in industrial gammagraphy

    International Nuclear Information System (INIS)

    Sajaroff, P.M.

    1988-01-01

    Gammagraphy is the most dangerous practice out of the commonly employed with radioactive materials or radiation sources in industry, medicine, research and training. The amount of accidents which took place in different countries and their radiological consequences oblige to take extreme precautions in order to reduce their happening to the maximum. The principal cause of the accidents is the human error, the most common of which are described. Safe operation depends on the quality of the equipment and the human factors, thus it is mandatory to accomplish a series of requirements, the most important of which are presented. The solution of the problem mainly requires the application of an adequate programme of quality warranty to the design, construction, testing and operation. Furthermore, the radiation sources must be identified by unnoticed persons. Finally a brief description of some accidents which took place in different countries are presented. (M.E.L.) [es

  5. Correlation of Safety Culture Attributes in Construction Industry

    Directory of Open Access Journals (Sweden)

    Pervez Shaikh

    2013-07-01

    Full Text Available The importance of construction industry can not be overemphasized because it is one of the biggest contributors toward economic activities of a country. It employs a countable number of workforce and it is prone to accidents, incidents, hazards and disasters, therefore, the safety factor is equally important. The current research explores safety culture in the perspective of its important attributes. The EFQM (European Foundation for Quality Management is taken as the bases for finding the ways and means of safety culture improvement of the construction industry. The correlation of pattern of responses is found for every attribute of the safety culture and the interrelationships and strengths are worked out to detect the involvement of the attribute.

  6. Occupational safety and health in the food and drink industries.

    OpenAIRE

    Tomoda S

    1993-01-01

    Chapter 5 examines "Safety and health issues in respect of women workers in the food and drink industries". The paper provides information on the impact of technological progress in the sector; identifies the general hazards encountered; describes the injuries and diseases suffered by workers and concentrates on the most common approaches adopted for their prevention; and concludes by emphasizing the importance of adopting a tripartite approach to the solution of safety and health problems.

  7. Industrial safety and fire protection during the construction phase

    International Nuclear Information System (INIS)

    Zimmer, K.

    1977-01-01

    The questions and problems of industrial safety and fire prevention have to be treated like the activities planning, developing, assembly, etc. This statement is illustrated by statistics of the fire insurance companies, from which it can be seen that the number of fire accidents has decreased but that the damage caused has greatly increased. The sooner the fire prevention and industrial safety measures are integrated in the planning phase, the better for the total costs. Preventive measures that possibly have to be introduced at a later stage are not only generally much more expensive but are also seldom as effective. (orig./HK) [de

  8. Industrial Design: Applied Arts Component as a Factor in Design ...

    African Journals Online (AJOL)

    The paper also established that the principles and practice of problem solving skills and initiatives such as drawing, drafting (draught-manship), modeling or sculpting (in clay or industrial plasticine) styling and prototype creation realized by moulding/shaping of the clay material to assume any contour, shape, form or ...

  9. Safety culture: a survey of the state-of-the-art

    International Nuclear Information System (INIS)

    Sorensen, J.N.

    2002-01-01

    This paper discusses the evolution of the term 'safety culture' and the perceived relationship between safety culture and safety of operations in nuclear power generation and other hazardous technologies. There is a widespread belief that safety culture is an important contributor to safety of operations. Empirical evidence that safety culture and other management and organizational factors influence operational safety is more readily available for the chemical process industry than for nuclear power plant operations. The commonly accepted attributes of safety culture include good organizational communications, good organizational learning, and senior management commitment to safety. Safety culture may be particularly important in reducing latent errors in complex, well-defended systems. The role of regulatory bodies in fostering strong safety cultures remains unclear, and additional work is required to define the essential attributes of safety culture and to identify reliable performance indicators

  10. Teamwork and Safety in the Maritime Industry: A SWOT Approach

    OpenAIRE

    Vestad, Anne-Lise

    2010-01-01

    Abstract The past few decades the use of teams has increased, also in complex sociotechnical systems such as the maritime industry. Safety issues involve a wide range of elements, including human factors, and pose a number of challenges to organisations in the shipping industry. The primary aim of this study was to examine the Big Five of teamwork model and its ability to capture teamwork aspects of all kinds of teams, independent of team type, organisational level and domain. The collect...

  11. Ecological safety of thermal power industry and investments

    International Nuclear Information System (INIS)

    Glebov, V.P.

    1995-01-01

    Evaluation of ecological safety of domestic fossil fuel thermal power industry is given in comparison with foreign one. Ways of solving ecological problems are considered. They are based on introduction of new technologies, providing decrease of ecological effect, on development of effective ash-and sulfur-trapping, nitrogen purification equipment, on production of ecologically improved fuel. The necessity of investments to power industry is noted

  12. Testing laboratories, its function in ensuring industrial safety

    International Nuclear Information System (INIS)

    Sanchez Fernandez, M.

    2015-01-01

    This article discusses and justifies the development of industrial laboratories (testing and calibration) in Spain, since its embryo, its creation and development, to the present day. Likewise, presents its interrelation with other agents, as well as the legislative and technical framework is application along to the years. Within this development of the sector, highlights the period of the conformity assessment, and consequently its relationship with Industrial safety. Finally, describes the organizational situation of the sector both nationally and internationally. (Author)

  13. Uncertainty in safety : new techniques for the assessment and optimisation of safety in process industry

    NARCIS (Netherlands)

    Rouvroye, J.L.; Nieuwenhuizen, J.K.; Brombacher, A.C.; Stavrianidis, P.; Spiker, R.Th.E.; Pyatt, D.W.

    1995-01-01

    At this moment there is no standardised method for the assessment for safety in the process industry. Many companies and institutes use qualitative techniques for safety analysis while other companies and institutes use quantitative techniques. The authors of this paper will compare different

  14. Decommissioning of Medical, Industrial and Research Facilities. Safety Guide

    International Nuclear Information System (INIS)

    2010-01-01

    Radioactive waste is produced in the generation of nuclear power and the use of radioactive materials in industry, research and medicine. The importance of the safe management of radioactive waste for the protection of human health and the environment has long been recognized, and considerable experience has been gained in this field. The IAEA's Radioactive Waste Safety Standards Programme aimed at establishing a coherent and comprehensive set of principles and requirements for the safe management of waste and formulating the guidelines necessary for their application. This is accomplished within the IAEA Safety Standards Series in an internally consistent set of publications that reflect an international consensus. The publications will provide Member States with a comprehensive series of internationally agreed publications to assist in the derivation of, and to complement, national criteria, standards and practices. The Safety Standards Series consists of three categories of publications: Safety Fundamentals, Safety Requirements and Safety Guides. With respect to the Radioactive Waste Safety Standards Programme, the set of publications is currently undergoing review to ensure a harmonized approach throughout the Safety Standards Series. This Safety Guide addresses the subject of decommissioning of medical, industrial and research facilities where radioactive materials and sources are produced, received, used and stored. It is intended to provide guidance to national authorities and operating organizations, particularly to those in developing countries (as such facilities are predominant in these countries), for the planning and safe management of the decommissioning of such facilities. The Safety Guide has been prepared through a series of Consultants meetings and a Technical Committee meeting

  15. Decommissioning of medical, industrial and research facilities. Safety guide

    International Nuclear Information System (INIS)

    2005-01-01

    Radioactive waste is produced in the generation of nuclear power and the use of radioactive materials in industry, research and medicine. The importance of the safe management of radioactive waste for the protection of human health and the environment has long been recognized, and considerable experience has been gained in this field. The IAEA's Radioactive Waste Safety Standards Programme aimed at establishing a coherent and comprehensive set of principles and requirements for the safe management of waste and formulating the guidelines necessary for their application. This is accomplished within the IAEA Safety Standards Series in an internally consistent set of publications that reflect an international consensus. The publications will provide Member States with a comprehensive series of internationally agreed publications to assist in the derivation of, and to complement, national criteria, standards and practices. The Safety Standards Series consists of three categories of publications: Safety Fundamentals, Safety Requirements and Safety Guides. With respect to the Radioactive Waste Safety Standards Programme, the set of publications is currently undergoing review to ensure a harmonized approach throughout the Safety Standards Series. This Safety Guide addresses the subject of decommissioning of medical, industrial and research facilities where radioactive materials and sources are produced, received, used and stored. It is intended to provide guidance to national authorities and operating organizations, particularly to those in developing countries (as such facilities are predominant in these countries), for the planning and safe management of the decommissioning of such facilities. The Safety Guide has been prepared through a series of Consultants meetings and a Technical Committee meeting

  16. Managing for safety and safety culture within the UK nuclear industry. A regulator's perspective

    International Nuclear Information System (INIS)

    Tyrer, M.J.

    2002-01-01

    This paper outlines the basis of the legal system for the regulation of health and safety at work within the United Kingdom (UK), and in particular, the regulation of the nuclear industry. The framework, formulated by the regulator, which has been published as a practical guide for directors, managers, health and safety professionals and employee representatives for the successful management of health and safety is explained. This guidance, however, concentrates, to a large extent, on management systems and only addresses in part the types of issues, such as behaviours, values, attitudes and beliefs which contribute to the safety culture of an organization. The regulator of the UK nuclear industry has considered research, and other work, carried out by several organizations in this area, notably the Advisory Committee on the Safety of Nuclear Installations (ACSNI) and the International Atomic Energy Agency (IAEA), and produced its own framework for managing for safety at nuclear installations. As a regulator, the Health and Safety Executive (HSE), and its inspectorate responsible for regulation of the nuclear industry, HM Nuclear Installations Inspectorate (HMNII), are not the appropriate organization to assess the safety culture of an organization, but positively encourage organizations to both carry out this assessment themselves and to monitor their performance. To this end, HSE has developed, and made available, the Health and Safety Climate Tool which is aimed at providing organizations with information which can be used as part of a continuous improvement process. (author)

  17. Wireless Sensing Based on RFID and Capacitive Technologies for Safety in Marble Industry Process Control

    Directory of Open Access Journals (Sweden)

    Fabrizio Iacopetti

    2013-01-01

    Full Text Available This paper presents wireless sensing systems to increase safety and robustness in industrial process control, particularly in industrial machines for marble slab working. The process is performed by abrasive or cutting heads activated independently by the machine controller when the slab, transported on a conveyer belt, is under them. Current slab detection systems are based on electromechanical or optical devices at the machine entrance stage, suffering from deterioration and from the harsh environment. Slab displacement or break inside the machine due to the working stress may result in safety issues and damages to the conveyer belt due to incorrect driving of the working tools. The experimented contactless sensing techniques are based on four RFID and two capacitive sensing technologies and on customized hardware/software. The proposed solutions aim at overcoming some limitations of current state-of-the-art detection systems, allowing for reliable slab detection, outside and/or inside the machine, while maintaining low complexity and at the same time robustness to industrial harsh conditions. The proposed sensing devices may implement a wireless or wired sensor network feeding detection data to the machine controller. Data integrity check and process control algorithms have to be implemented for the safety and reliability of the overall industrial process.

  18. Process Control Systems in the Chemical Industry: Safety vs. Security

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey Hahn; Thomas Anderson

    2005-04-01

    Traditionally, the primary focus of the chemical industry has been safety and productivity. However, recent threats to our nation’s critical infrastructure have prompted a tightening of security measures across many different industry sectors. Reducing vulnerabilities of control systems against physical and cyber attack is necessary to ensure the safety, security and effective functioning of these systems. The U.S. Department of Homeland Security has developed a strategy to secure these vulnerabilities. Crucial to this strategy is the Control Systems Security and Test Center (CSSTC) established to test and analyze control systems equipment. In addition, the CSSTC promotes a proactive, collaborative approach to increase industry's awareness of standards, products and processes that can enhance the security of control systems. This paper outlines measures that can be taken to enhance the cybersecurity of process control systems in the chemical sector.

  19. Food Safety Practices in the Egg Products Industry.

    Science.gov (United States)

    Viator, Catherine L; Cates, Sheryl C; Karns, Shawn A; Muth, Mary K; Noyes, Gary

    2016-07-01

    We conducted a national census survey of egg product plants (n = 57) to obtain information on the technological and food safety practices of the egg products industry and to assess changes in these practices from 2004 to 2014. The questionnaire asked about operational and sanitation practices, microbiological testing practices, food safety training for employees, other food safety issues, and plant characteristics. The findings suggest that improvements were made in the industry's use of food safety technologies and practices between 2004 and 2014. The percentage of plants using advanced pasteurization technology and an integrated, computerized processing system increased by almost 30 percentage points. Over 90% of plants voluntarily use a written hazard analysis and critical control point (HACCP) plan to address food safety for at least one production step. Further, 90% of plants have management employees who are trained in a written HACCP plan. Most plants (93%) conduct voluntary microbiological testing. The percentage of plants conducting this testing on egg products before pasteurization has increased by almost 30 percentage points since 2004. The survey findings identify strengths and weaknesses in egg product plants' food safety practices and can be used to guide regulatory policymaking and to conduct required regulatory impact analysis of potential regulations.

  20. State of the Art of the Ignalina RBMK-1500 Safety

    International Nuclear Information System (INIS)

    Uspuras, E.

    2010-01-01

    Ignalina NPP is the only nuclear power plant in Lithuania consisting of two units, commissioned in 1983 and 1987. Unit 1 of Ignalina NPP was shut down for decommissioning at the end of 2004 and Unit 2 is to be operated until the end of 2009. Both units are equipped with channel-type graphite-moderated boiling water reactors RBMK-1500. The paper summarizing the results of deterministic and probabilistic analyses is developed within 1991 to 2007 by specialists from Lithuanian Energy Institute. The main operational safety aspects, including analyses performed according the Ignalina Safety Improvement Programs, development and installation of the Second Shutdown System and Guidelines on Severe Accidents Management are discussed. Also the phenomena related to the closure of the gap between fuel channel and graphite bricks, multiple fuel channel tube rupture, and containment issues as well as implication of the external events to the Ignalina NPP safety are discussed separately.

  1. Occupational safety of different industrial sectors in Khartoum State, Sudan. Part 1: Safety performance evaluation.

    Science.gov (United States)

    Zaki, Gehan R; El-Marakby, Fadia A; H Deign El-Nor, Yasser; Nofal, Faten H; Zakaria, Adel M

    2012-12-01

    Safety performance evaluation enables decision makers improve safety acts. In Sudan, accident records, statistics, and safety performance were not evaluated before maintenance of accident records became mandatory in 2005. This study aimed at evaluating and comparing safety performance by accident records among different cities and industrial sectors in Khartoum state, Sudan, during the period from 2005 to 2007. This was a retrospective study, the sample in which represented all industrial enterprises in Khartoum state employing 50 workers or more. All industrial accident records of the Ministry of Manpower and Health and those of different enterprises during the period from 2005 to 2007 were reviewed. The safety performance indicators used within this study were the frequency-severity index (FSI) and fatal and disabling accident frequency rates (DAFR). In Khartoum city, the FSI [0.10 (0.17)] was lower than that in Bahari [0.11 (0.21)] and Omdurman [0.84 (0.34)]. It was the maximum in the chemical sector [0.33 (0.64)] and minimum in the metallurgic sector [0.09 (0.19)]. The highest DAFR was observed in Omdurman [5.6 (3.5)] and in the chemical sector [2.5 (4.0)]. The fatal accident frequency rate in the mechanical and electrical engineering industry was the highest [0.0 (0.69)]. Male workers who were older, divorced, and had lower levels of education had the lowest safety performance indicators. The safety performance of the industrial enterprises in Khartoum city was the best. The safety performance in the chemical sector was the worst with regard to FSI and DAFR. The age, sex, and educational level of injured workers greatly affect safety performance.

  2. Safety I and C system platforms - State-of-the-art and long-term available - A contradiction in terms?

    International Nuclear Information System (INIS)

    Richter, Steffen; Martin, Michael

    2006-01-01

    Automation systems, particularly in the field of safety I and C, are subject to conflict between three challenges. Customers' requests for state-of-the-art technology, ever shorter innovation cycles in the electronics industry and computer business and the requirement for long-term spare parts supply demand thorough and sustainable concepts from the supply market. The TELEPERM XS digital safety I and C platform has been applied successfully since 1998 for the modernization of safety I and C systems in over 30 NPP units from different reactor suppliers as well as for new plant construction. The platform is subject to a forward-looking life cycle management program combining an evolutionary and future-oriented approach to platform development with measures for ensuring the long-term support of the installed base. Driven by ever shorter innovation cycles in the electronics and automation industry, the platform is continuously evolved with state-of-the-art technology and enhanced safety features. The continuous innovation process is combined with maximum compatibility of the I and C components that make up the TELEPERM XS system platform. This makes the system future-oriented and simultaneously assures long-term availability of replacement parts. In this way TELEPERM XS meets the customer requirements for up-to-date but proven technology suitable to ensure an operating life of safety I and C equipment spanning several decades. As a matter of course, the platform and component development adheres to the robust and proven architecture of TELEPERM XS, thereby limiting risks for equipment qualification and project licensing to a minimum. (authors)

  3. Safety I and C system platforms - State-of-the-art and long-term available - A contradiction in terms?

    Energy Technology Data Exchange (ETDEWEB)

    Richter, Steffen; Martin, Michael [Framatome ANP GmbH, P.O. Box 3220, Freyeslebenstrasse 1, D-91050 Erlangen (Germany)

    2006-07-01

    Automation systems, particularly in the field of safety I and C, are subject to conflict between three challenges. Customers' requests for state-of-the-art technology, ever shorter innovation cycles in the electronics industry and computer business and the requirement for long-term spare parts supply demand thorough and sustainable concepts from the supply market. The TELEPERM XS digital safety I and C platform has been applied successfully since 1998 for the modernization of safety I and C systems in over 30 NPP units from different reactor suppliers as well as for new plant construction. The platform is subject to a forward-looking life cycle management program combining an evolutionary and future-oriented approach to platform development with measures for ensuring the long-term support of the installed base. Driven by ever shorter innovation cycles in the electronics and automation industry, the platform is continuously evolved with state-of-the-art technology and enhanced safety features. The continuous innovation process is combined with maximum compatibility of the I and C components that make up the TELEPERM XS system platform. This makes the system future-oriented and simultaneously assures long-term availability of replacement parts. In this way TELEPERM XS meets the customer requirements for up-to-date but proven technology suitable to ensure an operating life of safety I and C equipment spanning several decades. As a matter of course, the platform and component development adheres to the robust and proven architecture of TELEPERM XS, thereby limiting risks for equipment qualification and project licensing to a minimum. (authors)

  4. Implementation of safety management systems in Hong Kong construction industry - A safety practitioner's perspective.

    Science.gov (United States)

    Yiu, Nicole S N; Sze, N N; Chan, Daniel W M

    2018-02-01

    In the 1980s, the safety management system (SMS) was introduced in the construction industry to mitigate against workplaces hazards, reduce the risk of injuries, and minimize property damage. Also, the Factories and Industrial Undertakings (Safety Management) Regulation was introduced on 24 November 1999 in Hong Kong to empower the mandatory implementation of a SMS in certain industries including building construction. Therefore, it is essential to evaluate the effectiveness of the SMS in improving construction safety and identify the factors that influence its implementation in Hong Kong. A review of the current state-of-the-practice helped to establish the critical success factors (CSFs), benefits, and difficulties of implementing the SMS in the construction industry, while structured interviews were used to establish the key factors of the SMS implementation. Results of the state-of-the-practice review and structured interviews indicated that visible senior commitment, in terms of manpower and cost allocation, and competency of safety manager as key drivers for the SMS implementation. More so, reduced accident rates and accident costs, improved organization framework, and increased safety audit ratings were identified as core benefits of implementing the SMS. Meanwhile, factors such as insufficient resources, tight working schedule, and high labor turnover rate were the key challenges to the effective SMS implementation in Hong Kong. The findings of the study were consistent and indicative of the future development of safety management practice and the sustainable safety improvement of Hong Kong construction industry in the long run. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

  5. State of the art on construction automation and robotic system in domestic and foreign construction industry

    International Nuclear Information System (INIS)

    Lee, Sung Uk; Seo, Yong Chil; Jung, Seung Ho; Cho, Jai Wan; Choi, Young Soo

    2007-08-01

    In this report, we review the existing concept of construction automation and also survey the state of the art on construction automation and robotic system in domestic and foreign construction industry. On the basis of the result of review and survey, we want to suggest an applicable robotic technology to construction industry and points to be duly considered for activating construction automation. We investigate the state of the art on construction automation and robotic system in domestic and foreign construction industry and also applicable area and direction of domestic construction automation and robotic system. We hope that construction automation and robotic technology, which are improved rapidly nowadays, can contribute to the growth of construction industry

  6. Safety performance evaluation using proactive indicators in a selected industry

    Directory of Open Access Journals (Sweden)

    Abolfazl Barkhordari

    2015-03-01

    Full Text Available Background & Objectives: Quality and effectiveness of safety systems are critical factors in achieving their goals. This study was aimed to represent a method for performance evaluation of safety systems by proactive indicators using different updated models in the field of safety which will be tested in a selected industry. Methods: This study is a cross-sectional study. Proactive indicators used in this study were: Unsafe acts rate, Safety Climate, Accident Proneness, and Near-miss incident rate. The number of in 1473 safety climate questionnaires and 543 Accident Proneness questionnaires was completed. Results: The minimum and maximum safety climate score were 56.88 and 58.2, respectively, and the minimum and maximum scores of Accident Proneness were 98.2 and 140.7, respectively. The maximum number of Near-miss incident rate were 408 and the minimum of that was 196. The maximum number of unsafe acts rate was 43.8 percent and the minimum of that was 27.2 percent. In nine dimensions of Safety climate the eighth dimension (personal perception of risk with the score of 4.07 has the lowest score and the fourth (laws and safety regulations dimension with 8.05 has the highest score. According to expert opinions, the most important indicator in the assessment of safety performance was unsafe acts rate, while near-miss incident rate was the least important one. Conclusion: The results of this survey reveal that using proactive (Prospective indicators could be an appropriate method in organizations safety performance evaluation.

  7. SAFETY PERFORMANCE OF SUBCONTRACTORS IN THE PALESTINIAN CONSTRUCTION INDUSTRY

    Directory of Open Access Journals (Sweden)

    Adnan Enshassi

    2008-06-01

    Full Text Available Subcontractors perform most of the construction works and their effect on industry are apparent in different activities of construction. Therefore, subcontractors need more attention from government and contractors union. The aim of this paper is to identify, evaluate, and rank factors that influence safety performance of subcontractors in the Gaza Strip (Palestine according to their relative importance. The study concluded that reported accident rates will decrease among subcontractors and their workers if new workers are trained well in the work site and they are informed about dangerous places, and if a workable safety plan is well preplanned. The results also showed that reported accident rates increased among subcontractors when using old, unsafe equipment and due to the complexity or difficulty in the construction sites features. Owners and general contractors need to stipulate strict clauses for safety in the contract for improving safety record of subcontractors. Construction workers must receive proper job related safety and health training with a safety logbook. It is recommended that the subcontractors and workers should attend continuing safety programs on regular basis as part of their perquisite to work in construction sites.

  8. Human factor in the problem of Russian nuclear industry safety

    International Nuclear Information System (INIS)

    Abramova, V.

    2002-01-01

    The approach to human factor definition, considered in the paper, consists of recognition of as many as possible factors for developing a complete list of factors, which have influence on mistakes or successful work of NPP personnel. Safety culture is considered as the main factor. The enhancement in nuclear power industry includes an optimization of organizational structures and development of personnel safety attitudes. The organizational factors, as possible root causes for human errors, need to be identified, assessed and improved. The organizational activities taken in Russia are presented

  9. Advanced Korean Industrial Safety and Health Policy with Risk Assessment

    Directory of Open Access Journals (Sweden)

    Hyuckmyun Kwon

    2010-09-01

    Full Text Available This article describes a systematic roadmap master plan for advanced industrial safety and health policy in Korea, with an emphasis on. Since Korean industries had first emergence of industrial safety and health policy in 1953, enormous efforts have been made on upgrading the relevant laws in order to reflect real situation of industrial work environment in accordance with rapid changes of Korean and global business over three decades. Nevertheless, current policy has major defects; too much techniques-based articles, diverged contents in less organization, combined enforcement and punishments and finally enforcing regulations full of commands and control. These deficiencies have make it difficult to accommodate changes of social, industrial and employment environment in customized fashion. The approach to the solution must be generic at the level of paradigm- shift rather than local modifications and enhancement. The basic idea is to establish a new system integrated with a risk assessment scheme, which encourages employers to apply to their work environment under comprehensive responsibility. The risk assessment scheme is designed to enable to inspect employers’ compliances afterwards. A project comprises four yearly phases based on applying zones; initially designating and operating a specified risk zone, gradually expanding the special zones during a period of 3 years (2010-2012 and the final zone expanded to entire nation. In each phase, the intermediate version of the system is updated through a process of precise and unbiased validation in terms of its operability, feasibility and sustainability with building relevant infrastructures as needed.

  10. Advanced korean industrial safety and health policy with risk assessment.

    Science.gov (United States)

    Kwon, Hyuckmyun; Cho, Jae Hyun; Moon, Il; Choi, Jaewook; Park, Dooyong; Lee, Youngsoon

    2010-09-01

    This article describes a systematic roadmap master plan for advanced industrial safety and health policy in Korea, with an emphasis on. Since Korean industries had first emergence of industrial safety and health policy in 1953, enormous efforts have been made on upgrading the relevant laws in order to reflect real situation of industrial work environment in accordance with rapid changes of Korean and global business over three decades. Nevertheless, current policy has major defects; too much techniques-based articles, diverged contents in less organization, combined enforcement and punishments and finally enforcing regulations full of commands and control. These deficiencies have make it difficult to accommodate changes of social, industrial and employment environment in customized fashion. The approach to the solution must be generic at the level of paradigm-shift rather than local modifications and enhancement. The basic idea is to establish a new system integrated with a risk assessment scheme, which encourages employers to apply to their work environment under comprehensive responsibility. The risk assessment scheme is designed to enable to inspect employers' compliances afterwards. A project comprises four yearly phases based on applying zones; initially designating and operating a specified risk zone, gradually expanding the special zones during a period of 3 years (2010-2012) and the final zone expanded to entire nation. In each phase, the intermediate version of the system is updated through a process of precise and unbiased validation in terms of its operability, feasibility and sustainability with building relevant infrastructures as needed.

  11. Manual on oil-gas industry waste utilization radioecological safety

    International Nuclear Information System (INIS)

    Kudryashev, V.A.; Lukashenko, S.N.; Tuleushev, A.Zh.; Marabaev, Zh.N.; Pasysaev, V.A.; Kayukov, P.G.; Kozhakhmetov, N.B.; Shevtsov, S.P.

    2003-01-01

    The development of a new document - 'Manual on radio-ecologically safe utilization of waste from oil-and-gas production' is carried out. This document regulates the whole cycle of environment protection measures at waste utilization for the named industry in Kazakhstan and is aimed on lowering the radiation risks and assurance of radioecological safety both at present and for the future. The document presents a set regulations necessary for radioactive wastes handling in the oil-gas industry. The normative document was agreed in both the Ministry of Health of the Republic of Kazakhstan (RK) and Ministry of Environment Protection of RK

  12. Industrial Arts Curriculum Guide in Basic Technical Drafting. Bulletin No. 1686.

    Science.gov (United States)

    Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

    This curriculum guide contains operational guidelines to help local administrators, teacher educators, and industrial arts teachers in the State of Louisiana determine the extent to which their technical drafting courses are meeting the needs of the youth they serve. It consists of a discussion of course prerequisites, goals, content, and…

  13. Industrial Arts Test Development, Book III. Resource Items for Graphics Technology, Power Technology, Production Technology.

    Science.gov (United States)

    New York State Education Dept., Albany.

    This booklet is designed to assist teachers in developing examinations for classroom use. It is a collection of 955 objective test questions, mostly multiple choice, for industrial arts students in the three areas of graphics technology, power technology, and production technology. Scoring keys are provided. There are no copyright restrictions,…

  14. Competing Values in the Culinary Arts and Hospitality Industry: Leadership Roles and Managerial Competencies

    Science.gov (United States)

    Riggs, Michael W.; Hughey, Aaron W.

    2011-01-01

    It is important that education and training programmes align with the needs of the professions they are designed to support. The culinary arts and hospitality industry is a vocational area that needs to be examined more closely to ensure that the skills and competencies taught are those that will actually be needed when students matriculate from…

  15. Artfulness

    DEFF Research Database (Denmark)

    Chemi, Tatiana

    2011-01-01

    a collage of previously published materials on Artfulness, in this journal targeted teachers for dysfunctional behaviour children.......a collage of previously published materials on Artfulness, in this journal targeted teachers for dysfunctional behaviour children....

  16. Probabilistic safety assessment in the chemical and nuclear industries

    CERN Document Server

    Fullwood, Ralph R

    2000-01-01

    Probabilistic Safety Analysis (PSA) determines the probability and consequences of accidents, hence, the risk. This subject concerns policy makers, regulators, designers, educators and engineers working to achieve maximum safety with operational efficiency. Risk is analyzed using methods for achieving reliability in the space program. The first major application was to the nuclear power industry, followed by applications to the chemical industry. It has also been applied to space, aviation, defense, ground, and water transportation. This book is unique in its treatment of chemical and nuclear risk. Problems are included at the end of many chapters, and answers are in the back of the book. Computer files are provided (via the internet), containing reliability data, a calculator that determines failure rate and uncertainty based on field experience, pipe break calculator, event tree calculator, FTAP and associated programs for fault tree analysis, and a units conversion code. It contains 540 references and many...

  17. LABOUR PROTECTION AND SAFETY IN THE BREWING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Irina Melnik

    2016-10-01

    Full Text Available The article describes the quantification of the level of safety in the brewing industry, which allows determining the contribution of each employee to ensure healthy and safe working conditions. Factors have also been shown to affect the safety of each of the employees. Knowledge of the characteristics and limits of each of the factors makes it possible to secure workflow and solve potential problems early. Previously considered a comprehensive approach that allows full control of the security protecting the entire brewing industry. Efficient and safe work is possible only if the working environment at the workplace to meet all the requirements of international standards in the field of occupational safety and health. Therefore, each category from a number of activities, which can significantly reduce the level of injury, and ending with the characteristics of each of the factors for drawing up a plan to ensure the maximum protection of the company's employees, was discussed. Chemical, physical, biological and psychophysical factors may exist alone or in combination with each other. It is therefore important to identify in advance all of them and to take all measures relating to ensure safe working conditions in each of the processes. Separately considered optimal and allowable values of temperature, relative humidity and air velocity in the working area of industrial premises. The parameters were established for the purpose of continuous monitoring in order to ensure comfortable and safe work environment for each employee. In some cases it is necessary to consult with technicians to get the full picture of the possible threats posed by each type of equipment. Especially dangerous in terms of occupational safety and health in the brewing industry is a cooking workshop, where the air temperature in the working area is significantly increased, as well as the bottling plant (noisy.

  18. Safety Performance Index Industri Batik Tulis Berdasarkan Kriteria Majemuk

    Directory of Open Access Journals (Sweden)

    Nachnul Ansori

    2015-12-01

    Full Text Available Accident generally occurs due to the activities which is done in unsafe conditions or even unsafe behavior. These conditions can influence workers productivity. In batik industries, those workers use toxic material and work in non ergonomic atmosphere. Moreover, they also do not take care of the environment and do not use personal protective equipments (PPE. Workers at Madura batik SMEs have not fully realized the significance of occupational health and safety (OHS in their working areas. The aims of this research is to evaluate OHS performance based on the indicators of safety performance index (SPI, which is multicriteria, in that industri. The safety performance attributes were obtained from factor analysis from the previous study. The index is calculated based on the weighted evaluation results of critical behavior checklist (CBC, integrated with analytical hierarchy process (AHP. As the results, we should give priority to improve the knowledge and experience toward OHS of the workers and also improve the working environment of the Madura’s batik industries. Additionally, the performance of OHS in coloring process is also on the threshold of unsafe condition, further development on the coloring process is needed.

  19. Evaluation of food safety management systems in Serbian dairy industry

    Directory of Open Access Journals (Sweden)

    Igor Tomašević

    2016-01-01

    Full Text Available This paper reports incentives, costs, difficulties and benefits of food safety management systems implementation in the Serbian dairy industry. The survey involved 27 food business operators with the national milk and dairy market share of 65 %. Almost two thirds of the assessed dairy producers (70.4 % claimed that they had a fully operational and certified HACCP system in place, while 29.6 % implemented HACCP, but had no third party certification. ISO 22000 was implemented and certified in 29.6 % of the companies, while only 11.1 % had implemented and certified IFS standard. The most important incentive for implementing food safety management systems for Serbian dairy producers was to increase and improve safety and quality of dairy products. The cost of product investigation/analysis and hiring external consultants were related to the initial set-up of food safety management system with the greatest importance. Serbian dairy industry was not greatly concerned by the financial side of implementing food safety management systems due to the fact that majority of prerequisite programmes were in place and regularly used by almost 100 % of the producers surveyed. The presence of competency gap between the generic knowledge for manufacturing food products and the knowledge necessary to develop and implement food safety management systems was confirmed, despite the fact that 58.8 % of Serbian dairy managers had university level of education. Our study brings about the innovation emphasizing the attitudes and the motivation of the food production staff as the most important barrier for the development and implementation of HACCP. The most important identified benefit was increased safety of dairy products with the mean rank scores of 6.85. The increased customer confidence and working discipline of staff employed in food processing were also found as important benefits of implementing/operating HACCP. The study shows that the level of HACCP

  20. Safety Politics and Risk Perceptions in Malaysian Industry

    DEFF Research Database (Denmark)

    Wangel, Arne

    Abstract The book deals with the analysis of work hazards and safety in industrial enterprises in Peninsular Malaysia, Southeast Asia. It traces the development of this theme of conflict within the context constituted by state, labour market and labour-management relations in Malaysia. The book...... and safety, when compared with the influence of local conditions? What kind of process develops, as local theory about work hazards are formed among workers. And, which are the opportunities for changing working environment institutions in Malaysia? The first part of the book discusses traditions...... by the state from Burawoy, Beronius, and Adesina about production politics and social relations in the labour process provides an integrated perspective on individual risk perceptions, safety practices in enterprises, and government regulation. The empirical data were collected during the period 1989...

  1. Safety Culture Development : The Gap Between Industry Guidelines and Literature, and the Differences Amongst Industry Sectors.

    NARCIS (Netherlands)

    Karanikas, Nektarios; Soltani, Pedram; de Boer, Robert J.; Roelen, Alfred L.C.; Arezes, Pedro

    2016-01-01

    Reason’s typology of safety culture (i.e. Just, Informative, Learning, Flexible and Reporting cultures) is widely used in the industry and academia. Through literature review we developed a framework including 36 markers that reflect the operationalization of Reason’s sub-cultures and general

  2. Czech safety concept: 2013 state of the art

    International Nuclear Information System (INIS)

    Vokal, Antonin; Slovak, Jiri

    2014-01-01

    The Czech Republic operates four WWER 440 reactors (Dukovany) and two WWER 1000 reactors (Temelin). The four 440 MW Dukovany units were installed and began operation during the period 1985-1988. The two WWER 1000 reactors at Temelin started operation in 2002 and 2003. Currently, more than 8000 SF assemblies from WWER 440 reactors and 900 spent assemblies from WWER 1000 reactors spent fuel assemblies are stored in dry storage facilities located in the area of both NPP in approved casks or in pools at reactor sites. More than 4 000 assemblies are expected to be spent by 2025 at Dukovany reactors and 4 600 assemblies by 2042 at Temelin reactors. The multi-billion Euro contract to build two new nuclear reactors at the current site of Temelin with the option for an additional one in Dukovany has recently been launched in the Czech Republic. It is expected that more than 8 000 fuel assemblies would be spent in the three new nuclear reactors in the Czech Republic during their 60 years of electricity production. The basic reference plan is to directly dispose of all of the spent fuel assemblies in a deep geological repository (DGR), starting operation not earlier than in 2065. The DGR is planned to be located in granite host rock, because no other type of host rock in sufficient volume is available in the Czech Republic. Currently seven candidate sites for DGR suitable for geological disposal of SF assemblies have been selected, but due to negative community attitudes at the notion of have a repository in their backyard, they are still awaiting a detailed geological survey. According to proposed reference designs, SF assemblies should be in steel-based canisters emplaced in vertical or horizontal boreholes in granite host rock at approximately 500 m under the surface and surrounded by compacted bentonite. The Czech safety concept is based on the KBS-3 concept developed in Sweden. The Swedish concept is primarily based on almost thermodynamic stability of copper overpack in

  3. Industrial high pressure applications. Processes, equipment and safety

    Energy Technology Data Exchange (ETDEWEB)

    Eggers, Rudolf (ed.) [Technische Univ. Hamburg-Harburg, Hamburg (Germany). Inst. fuer Thermische Verfahrenstechnik

    2012-07-01

    Industrial high pressure processes open the door to many reactions that are not possible under 'normal' conditions. These are to be found in such different areas as polymerization, catalytic reactions, separations, oil and gas recovery, food processing, biocatalysis and more. The most famous high pressure process is the so-called Haber-Bosch process used for fertilizers and which was awarded a Nobel prize. Following an introduction on historical development, the current state, and future trends, this timely and comprehensive publication goes on to describe different industrial processes, including methanol and other catalytic syntheses, polymerization and renewable energy processes, before covering safety and equipment issues. With its excellent choice of industrial contributions, this handbook offers high quality information not found elsewhere, making it invaluable reading for a broad and interdisciplinary audience.

  4. Safety and Health Perceptions in Work-related Transport Activities in Ghanaian Industries

    Directory of Open Access Journals (Sweden)

    Charles Atombo

    2017-06-01

    Conclusion: OSH culture is not fully complied in industries transport activities. This study, therefore, supports the use of safety seminars and training sessions for industry workers responsible for transport operations for better integration of safety standards.

  5. Safety- and Risk Analysis Activities in Chemical Industry in Europe

    International Nuclear Information System (INIS)

    Kozine, Igor; Duijm, Nijs Jan; Lauridsen Kurt

    2001-01-01

    The current paper gives an overview of the legislation and the methods used in safety and risk management in the chemical industry within Europe and in particular within the European Union. The paper is based on a report that has been written for the SOS-1 project under the Nordic nuclear safety research (NKS). Safety- and risk-related matters in the process industry, in particular, in chemical, within the EU are subject to consideration at three levels: (1) EU legislation, (2) European/intemational standardisation, and (3) socio-economic analysis. EC Directives define the 'essential requirements', e.g., protection of health and safety, that must be fulfilled when goods are placed on the market or some industry is put into operation. The European standards bodies (CEN, CENELEC and ETSI) have the task of establishing the corresponding technical specifications, meeting the essential requirements of the Directives, compliance with which will provide a presumption of conformity with the essential requirements. Such specifications are referred to as 'harmonised standards'. Compliance with harmonised standards remains voluntary, and manufacturers are free to choose any other technical solution that provides compliance with the essential requirements. This view is stated in the 'New Approach' to technical harmonisation and standardisation (details can be found on the web page: http://europe.eu.int/comm/enterprise/newapproach/standardization/index .html). Standardisation as well as the regulation of technical risks is increasingly being undertaken at European or international level. The European legislator limits its role to the affirmation of overall objectives, and leaves it to the economic players to draw up the technical procedures and standards to specify in detail the ways and means of attaining them. Many countries have introduced requirements that new legislation and/or administrative regulations be subject to socio-economic analysis. In this respect there is a

  6. Instructional Materials in Manufacturing for Junior High School Industrial Arts. Final Report and Parts I-IV.

    Science.gov (United States)

    Ohio State Univ., Columbus.

    This Title XI Institute was designed and conducted to introduce the participants to inquiry and invention taking place in industrial arts curriculum across the United States. The institute participated in the inquiry stage through advanced study of manufacturing technology and industrial arts curriculum, and in the invention stage through the…

  7. 10 CFR 34.42 - Radiation Safety Officer for industrial radiography.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Radiation Safety Officer for industrial radiography. 34.42 Section 34.42 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION... Radiation Safety Officer for industrial radiography. The RSO shall ensure that radiation safety activities...

  8. 77 FR 24722 - Draft Guidance for Industry: Safety of Nanomaterials in Cosmetic Products; Availability

    Science.gov (United States)

    2012-04-25

    ...] Draft Guidance for Industry: Safety of Nanomaterials in Cosmetic Products; Availability AGENCY: Food and... safety assessment of nanomaterials in cosmetic products. This guidance is intended to assist industry in... Cosmetic Products.'' The draft guidance is intended to assist industry in identifying the potential safety...

  9. Computer-aided safety systems of industrial high energy objects

    International Nuclear Information System (INIS)

    Topolsky, N.G.; Gordeev, S.G.

    1995-01-01

    Modern objects of fuel and energy, chemical industries are characterized by high power consumption; by presence of large quantities of combustible and explosive substances used in technological processes; by advanced communications of submission systems of initial liquid and gasiform reagents, lubricants and coolants, the products of processing, and wastes of production; by advanced ventilation and pneumatic transport; and by complex control systems of energy, material and information flows. Such objects have advanced infrastructures, including a significant quantity of engineering buildings intended for storage, transportation, and processing of combustible liquids, gasiform fuels and materials, and firm materials. Examples of similar objects are nuclear and thermal power stations, chemical plants, machine-building factories, iron and steel industry enterprises, etc. Many tasks and functions characterizing the problem of fire safety of these objects can be accomplished only upon the development of special Computer-Aided Fire Safety Systems (CAFSS). The CAFSS for these objects are intended to reduce the hazard of disastrous accidents both causing fires and caused by them. The tasks of fire prevention and rescue work of large-scale industrial objects are analyzed within the bounds of the recommended conception. A functional structure of CAFSS with a list of the main subsystems forming a part of its composition has been proposed

  10. Radiological safety in petroleum industry. Towards prevention culture

    International Nuclear Information System (INIS)

    Truppa, Walter A.

    2007-01-01

    Within the frame of regulatory control of industrial applications the audit of sealed and open radioactive sources in oil uses is one of the most relevant. The handling of radioactive sources, the requirement of procedures and training are just a few examples among all those that make up the radiological safety culture. A number of requirements divided into three main groups: operational safety at the storage area of radioactive sources, during transportation and during the applications (Cementation, well logging and use of radiotracers) are highlighted. Due to the great number of aspects that have to be taken in account as well as the interrelation of all control processes it is highly recommended that aspects of safety culture and quality should be considered and improvements regarding prevention, should be introduced so as to correct deviations that could arise in order to avoid radiological risk situations, emphasizing risk perception situations, attitude training, implementation of audit and level of safety in the facilities and control of duties, involving radiological material handling, described in the present work. (author) [es

  11. Probabilistic safety analysis and risk-based inspection of nuclear research reactors: state-of-the-art and implementation proposal

    Energy Technology Data Exchange (ETDEWEB)

    Marques, Raíssa O.; Vasceoncelos, Vanderley de; Soares, Wellington A.; Silva Júnior, Silvério F.; Raso, Amanda L.; Mesquita, Amir Z., E-mail: raissaomarques@gmail.com, E-mail: vasconv@cdtn.br, E-mail: soaresw@cdtn.br, E-mail: silvasf@cdtn.br, E-mail: amandaraso@hotmail.com, E-mail: amir@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2017-07-01

    Industrial facilities systems deteriorate over time during operation, thus increasing the possibility of accidents. Risk-Based Inspection (RBI) classifies such systems by their risk information with the purpose of prioritizing inspection efforts. RBI can reduce inspection activities, resulting in lower risk levels, and maintaining reliability and safety in acceptable levels. Risk-Informed In-Service Inspection (RI-ISI) is a RBI approach used in nuclear industry. RI-ISI uses outcomes from Probabilistic Safety Analysis (PSA) of Nuclear Power Plants (NPP) to plan In-Service Inspections (ISI). Despite nuclear research reactors are simpler and have lower risks than power reactors, the application of PSA to them may be useful for safety improvements once they are more flexible, provide easier access to its core, and allow changes in fuel configurations in case of experimental tests. Ageing management of structures, systems and components important to safety of a nuclear research reactor throughout its lifetime is also required to assure continued adequacy of safety levels, reliable operation, and compliance with operational limits and conditions. This includes periodic review of ISI programs in which monitoring of material deterioration and aging effects are considered, and that can be supported by the RBI approach. A review of state-of-the-art of PSA and RBI applications to nuclear reactors is presented in this work. Advantages to apply these methodologies are also analyzed. PSA and RBI implementation proposal applied to nuclear research reactors is also presented, as well as its application to a TRIGA research nuclear reactor using computer codes developed by ReliaSoft® Corporation. (author)

  12. Probabilistic safety analysis and risk-based inspection of nuclear research reactors: state-of-the-art and implementation proposal

    International Nuclear Information System (INIS)

    Marques, Raíssa O.; Vasceoncelos, Vanderley de; Soares, Wellington A.; Silva Júnior, Silvério F.; Raso, Amanda L.; Mesquita, Amir Z.

    2017-01-01

    Industrial facilities systems deteriorate over time during operation, thus increasing the possibility of accidents. Risk-Based Inspection (RBI) classifies such systems by their risk information with the purpose of prioritizing inspection efforts. RBI can reduce inspection activities, resulting in lower risk levels, and maintaining reliability and safety in acceptable levels. Risk-Informed In-Service Inspection (RI-ISI) is a RBI approach used in nuclear industry. RI-ISI uses outcomes from Probabilistic Safety Analysis (PSA) of Nuclear Power Plants (NPP) to plan In-Service Inspections (ISI). Despite nuclear research reactors are simpler and have lower risks than power reactors, the application of PSA to them may be useful for safety improvements once they are more flexible, provide easier access to its core, and allow changes in fuel configurations in case of experimental tests. Ageing management of structures, systems and components important to safety of a nuclear research reactor throughout its lifetime is also required to assure continued adequacy of safety levels, reliable operation, and compliance with operational limits and conditions. This includes periodic review of ISI programs in which monitoring of material deterioration and aging effects are considered, and that can be supported by the RBI approach. A review of state-of-the-art of PSA and RBI applications to nuclear reactors is presented in this work. Advantages to apply these methodologies are also analyzed. PSA and RBI implementation proposal applied to nuclear research reactors is also presented, as well as its application to a TRIGA research nuclear reactor using computer codes developed by ReliaSoft® Corporation. (author)

  13. Culture, communication and safety: lessons from the airline industry.

    Science.gov (United States)

    d'Agincourt-Canning, Lori G; Kissoon, Niranjan; Singal, Mona; Pitfield, Alexander F

    2011-06-01

    Communication is a critical component of effective teamwork and both are essential elements in providing high quality of care to patients. Yet, communication is not an innate skill but a process influenced by internal (personal/cultural values) as well as external (professional roles and hierarchies) factors. To provide illustrative cases, themes and tools for improving communication. Literature review and consensus opinion based on extensive experience. Professional autonomy should be de-emphasized. Tools such as SBAR and simulation are important in communication and teamwork. Tools designed to improve communication and safety in the aviation industry may have applicability to the pediatric intensive care unit.

  14. State of the art on the probabilistic safety assessment (P.S.A.)

    International Nuclear Information System (INIS)

    Devictor, N.; Bassi, A.; Saignes, P.; Bertrand, F.

    2008-01-01

    The use of Probabilistic Safety Assessment (PSA) is internationally increasing as a means of assessing and improving the safety of nuclear and non-nuclear facilities. To support the development of a competence on Probabilistic Safety Assessment, a set of states of the art regarding these tools and their use has been made between 2001 and 2005, in particular on the following topics: - Definition of the PSA of level 1, 2 and 3; - Use of PSA in support to design and operation of nuclear plants (risk-informed applications); - Applications to Non Reactor Nuclear Facilities. The report compiled in a single document these states of the art in order to ensure a broader use; this work has been done in the frame of the Project 'Reliability and Safety of Nuclear Facility' of the Nuclear Development and Innovation Division of the Nuclear Energy Division. As some of these states of the art have been made in support to exchanges with international partners and were written in English, a section of this document is written in English. This work is now applied concretely in support to the design of 4. Generation nuclear systems as Sodium-cooled Fast Reactors and especially Gas-cooled Fast Reactor, that have been the subject of communications during the conferences ANS (Annual Meeting 2007), PSA'08, ICCAP'08 and in the journal Science and Technology of Nuclear Installations. (authors)

  15. A Nuclear Safety System based on Industrial Computer

    International Nuclear Information System (INIS)

    Kim, Ji Hyeon; Oh, Do Young; Lee, Nam Hoon; Kim, Chang Ho; Kim, Jae Hack

    2011-01-01

    The Plant Protection System(PPS), a nuclear safety Instrumentation and Control (I and C) system for Nuclear Power Plants(NPPs), generates reactor trip on abnormal reactor condition. The Core Protection Calculator System (CPCS) is a safety system that generates and transmits the channel trip signal to the PPS on an abnormal condition. Currently, these systems are designed on the Programmable Logic Controller(PLC) based system and it is necessary to consider a new system platform to adapt simpler system configuration and improved software development process. The CPCS was the first implementation using a micro computer in a nuclear power plant safety protection system in 1980 which have been deployed in Ulchin units 3,4,5,6 and Younggwang units 3,4,5,6. The CPCS software was developed in the Concurrent Micro5 minicomputer using assembly language and embedded into the Concurrent 3205 computer. Following the micro computer based CPCS, PLC based Common-Q platform has been used for the ShinKori/ShinWolsong units 1,2 PPS and CPCS, and the POSAFE-Q PLC platform is used for the ShinUlchin units 1,2 PPS and CPCS. In developing the next generation safety system platform, several factors (e.g., hardware/software reliability, flexibility, licensibility and industrial support) can be considered. This paper suggests an Industrial Computer(IC) based protection system that can be developed with improved flexibility without losing system reliability. The IC based system has the advantage of a simple system configuration with optimized processor boards because of improved processor performance and unlimited interoperability between the target system and development system that use commercial CASE tools. This paper presents the background to selecting the IC based system with a case study design of the CPCS. Eventually, this kind of platform can be used for nuclear power plant safety systems like the PPS, CPCS, Qualified Indication and Alarm . Pami(QIAS-P), and Engineering Safety

  16. A Nuclear Safety System based on Industrial Computer

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ji Hyeon; Oh, Do Young; Lee, Nam Hoon; Kim, Chang Ho; Kim, Jae Hack [Korea Electric Power Corporation Engineering and Construction, Daejeon (Korea, Republic of)

    2011-05-15

    The Plant Protection System(PPS), a nuclear safety Instrumentation and Control (I and C) system for Nuclear Power Plants(NPPs), generates reactor trip on abnormal reactor condition. The Core Protection Calculator System (CPCS) is a safety system that generates and transmits the channel trip signal to the PPS on an abnormal condition. Currently, these systems are designed on the Programmable Logic Controller(PLC) based system and it is necessary to consider a new system platform to adapt simpler system configuration and improved software development process. The CPCS was the first implementation using a micro computer in a nuclear power plant safety protection system in 1980 which have been deployed in Ulchin units 3,4,5,6 and Younggwang units 3,4,5,6. The CPCS software was developed in the Concurrent Micro5 minicomputer using assembly language and embedded into the Concurrent 3205 computer. Following the micro computer based CPCS, PLC based Common-Q platform has been used for the ShinKori/ShinWolsong units 1,2 PPS and CPCS, and the POSAFE-Q PLC platform is used for the ShinUlchin units 1,2 PPS and CPCS. In developing the next generation safety system platform, several factors (e.g., hardware/software reliability, flexibility, licensibility and industrial support) can be considered. This paper suggests an Industrial Computer(IC) based protection system that can be developed with improved flexibility without losing system reliability. The IC based system has the advantage of a simple system configuration with optimized processor boards because of improved processor performance and unlimited interoperability between the target system and development system that use commercial CASE tools. This paper presents the background to selecting the IC based system with a case study design of the CPCS. Eventually, this kind of platform can be used for nuclear power plant safety systems like the PPS, CPCS, Qualified Indication and Alarm . Pami(QIAS-P), and Engineering Safety

  17. Probabilistic analysis of safety in industrial irradiation plants

    International Nuclear Information System (INIS)

    Alderete, F.; Elechosa, C.

    2006-01-01

    The Argentinean Nuclear Regulatory Authority is carrying out the Probabilistic Safety Analysis (PSA) of the two industrial irradiation plants existent in the country. The objective of this presentation is to show from the regulatory point of view, the advantages of applying this tool, as well as the appeared difficulties; for it will be made a brief description of the facilities, of the method and of the normative one. Both plants are multipurpose facilities classified as 'industrial irradiator category IV' (panoramic irradiator with source deposited in pool). Basically, the execution of an APS consists of the following stages: 1. Identification of initiating events. 2. Modeling of Accidental Sequences (Event Trees). 3. Analysis of Systems (Fault trees). 4. Quantification of Accidental Sequences. The argentine normative doesn't demand to these facilities the realization of an APS, however the basic standard of Radiological Safety establishes that in the design of this type of facilities in the cases that is justified, should make sure that the annual probability of occurrence of an accidental sequence and the resulting dose in a person gives as result an radiological risk inferior to the risk limit adopted as acceptance criteria. On the other hand the design standard specifies for these irradiators it demands a maximum fault rate of 10 -2 for the related components with the systems of radiological safety. In our case, the possible initiating events have been identified that carried out to not wanted situations (about people exposure, radioactive contamination). Then, for each one of the significant initiating events, the corresponding accidental sequences were modeled and the safety systems that intervene in this sequences by means of fault trees were analyzed, for then to determine the fault probabilities of the same ones. At the moment they are completing these fault trees, but the difficulty resides in the impossibility of obtaining real data of the reliability

  18. Procurement in the Nuclear Industry, Quality, Safety and Decision Making

    International Nuclear Information System (INIS)

    Jakobsson, Marianne; Svenson, Ola; Salo, Ilkka

    2010-03-01

    The major purpose of the present study is partly to map and partly to make an analysis of the decision processes in the procurement routines in the nuclear industry in order to provide a basis for: 1. further development of safety inspections about procurements for Swedish Radiation Safety Authority 2. improvements of safety management in connection with procurement within a nuclear-power plant, 3 improvements of procurement routines in general in a nuclear power plant. The procurement processes at a nuclear power plant were analyzed from a decision theoretic perspective. Key staff at the plant was interviewed and written instructions as well as digitalized processes were used in the analysis. The results illustrate the most important moments during the procurement process with descriptions from interviews and documents. The staff at the nuclear power plant used a multi-attribute utility decision theory MAUT-inspired model in evaluation of alternatives and both compensatory (in which negative aspects can be compensated by positive aspects) and non-compensatory (in which certain 'pass' levels of attributes have to be exceeded for a choice) decision rules were used in the procurement process. Not surprising, nuclear safety was evaluated in a non-compensatory manner following regulatory criteria while costs were evaluated in trade-off compensatory rules, which means that a weakness in one consideration might be compensated by strength in another consideration. Thus, nuclear safety above the regulator's and law requirements are not integrated in a compensatory manner when procurement alternatives are evaluated. The nuclear plant assessed an organization's safety culture at an early stage of the purchasing process. A successful and a less successful procurement case were reported with the lessons learned from them. We find that the existing written instructions for purchase were well elaborated and adequate. There is a lack of personal resources when procurement teams

  19. Safety

    International Nuclear Information System (INIS)

    1998-01-01

    A brief account of activities carried out by the Nuclear power plants Jaslovske Bohunice in 1997 is presented. These activities are reported under the headings: (1) Nuclear safety; (2) Industrial and health safety; (3) Radiation safety; and Fire protection

  20. Safety- and Risk Analysis Activities in Chemical Industry in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Kozine, Igor; Duijm, Nijs Jan; Lauridsen Kurt [Risoe National Laboratory, Roskilde (Denmark). Systems Analysis Department

    2001-07-01

    The current paper gives an overview of the legislation and the methods used in safety and risk management in the chemical industry within Europe and in particular within the European Union. The paper is based on a report that has been written for the SOS-1 project under the Nordic nuclear safety research (NKS). Safety- and risk-related matters in the process industry, in particular, in chemical, within the EU are subject to consideration at three levels: (1) EU legislation, (2) European/intemational standardisation, and (3) socio-economic analysis. EC Directives define the 'essential requirements', e.g., protection of health and safety, that must be fulfilled when goods are placed on the market or some industry is put into operation. The European standards bodies (CEN, CENELEC and ETSI) have the task of establishing the corresponding technical specifications, meeting the essential requirements of the Directives, compliance with which will provide a presumption of conformity with the essential requirements. Such specifications are referred to as 'harmonised standards'. Compliance with harmonised standards remains voluntary, and manufacturers are free to choose any other technical solution that provides compliance with the essential requirements. This view is stated in the 'New Approach' to technical harmonisation and standardisation (details can be found on the web page: http://europe.eu.int/comm/enterprise/newapproach/standardization/index .html). Standardisation as well as the regulation of technical risks is increasingly being undertaken at European or international level. The European legislator limits its role to the affirmation of overall objectives, and leaves it to the economic players to draw up the technical procedures and standards to specify in detail the ways and means of attaining them. Many countries have introduced requirements that new legislation and/or administrative regulations be subject to socio-economic analysis

  1. Research study about the establishment of safety culture. Effects of organizational factors in construction industry's safety indices

    International Nuclear Information System (INIS)

    Kojima, Mitsuhiro; Hirose, Humiko; Takano, Kenichi; Hasegawa, Naoko

    1999-01-01

    To find the relationships between safety related activities (such as safety patrol' or '4s/5s activities') and accidents rate in the workplace, questionnaires were sent to 965 construction companies and 120 answers were returned. In this questionnaire, safety activities, safety regulations and safety policies of the companies were asked and organizational climates, company policies, philosophies and the number of accidents in workplace were also asked. There seems some relationships between accidents rate and safety activities, safety regulations and safety policies in the companies, but the deviations between estimate values and observed values are so great that it seems impossible to estimate the accidents rate in the working place from the safety activities, safety regulations and safety policies of the companies. On the other hand, some characteristics of safety activities and organizational climates in the construction industry were identified using multi variants analysis. More detailed researches using sophisticated questionnaire will be conducted in the construction industry and petrochemical industry and relationships between the accidents rate and the safety activities will be compared between different industries. (author)

  2. The safety of a nuclear industry in South Australia

    International Nuclear Information System (INIS)

    Higson, D.J.

    2016-01-01

    On 19 March 2015, the South Australian Government established a Royal Commission to consider and analyse the potential of South Australia to further participate in the nuclear fuel cycle, whether through the expansion of the current level of exploration, extraction and milling of uranium (the only parts of the nuclear power industry that are currently allowed in Australia) or by undertaking the conversion and enrichment of materials for the nuclear fuel cycle, the generation of electricity from nuclear fuels and/or the management, storage and disposal of nuclear wastes. This provides a timely opportunity to review the performance of the nuclear industry throughout the world, particularly in the safety of electricity generation and waste management, showing that - despite misconceptions about radiological risks and the significance of the accidents that have occurred - the record of this industry is exceptionally good. The Federal and South Australian State governments both have the policy that uranium mining is acceptable providing it is properly regulated. The success of this policy suggests that it is exactly the policy that should be adopted for all other parts of the nuclear fuel cycle, including the generation of electricity.

  3. Industrial hygiene, occupational safety and respiratory symptoms in the Pakistani cotton industry.

    Science.gov (United States)

    Khan, Abdul Wali; Moshammer, Hanns Michael; Kundi, Michael

    2015-04-02

    In the cotton industry of Pakistan, 15 million people are employed and exposed to cotton dust, toxic chemicals, noise and physical hazards. The aim of this study was to determine the prevalence of health symptoms, particularly respiratory symptoms, and to measure cotton dust and endotoxin levels in different textile factories of Faisalabad, Pakistan. A cross-sectional investigation was performed in a representative sample of 47 cotton factories in the Faisalabad region in Punjab, Pakistan. Respiratory symptoms of 800 workers were documented by questionnaire. Occupational safety in the factories was assessed by a trained expert following a checklist, and dust and endotoxin levels in different work areas were measured. Prevalence of respiratory disease symptoms (fever, shortness of breath, chest tightness and cough) was generally high and highest in the weaving section of the cotton industry (20-40% depending on symptoms). This section also displayed the poorest occupational safety ratings and the highest levels of inhalable cotton dust (mean±SD 4.6±2.5 vs 0.95±0.65 mg/m(3) in compact units). In contrast, endotoxin levels were highest in the spinning section (median 1521 EU/m(3)), where high humidity is maintained. There are still poor working conditions in the cotton industry in Pakistan where workers are exposed to different occupational hazards. More health symptoms were reported from small weaving factories (power looms). There is a dire need for improvements in occupational health and safety in this industrial sector with particular focus on power looms. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  4. Radiation protection, safety and associated problems in industrial radiography

    International Nuclear Information System (INIS)

    Le Roux, P.R.

    1990-01-01

    Industrial radiography is an indispensable tool for non-destructive testing. Its use entails potential radiation exposure to the operator as well as to the public. Since such radiation has the potential to be harmful, there is a need to limit radiation exposure to a level at which the risk is believed to be acceptable to the individual and to society. The Radiation Protection Society and the Department of National Health believe that the level of protection provided for radiation workers should be comparable with that in other 'safe' industries. The total risk for radiation workers includes the risk of non-radiation related accidents in the various occupations, as well as the special risks of radiation exposure. Industrial radiographers have one of the poorest safety records of all non-medical radiation workers. Operator errors and management errors seem to be the primary contributors to most accidental high exposures. It is necessary to remember that industrial radiography has to be carried out in a wide variety of work places under many different working conditions, both by day and by night. High energy end emissivity (X-ray output or source activity) is required for the radiation to be transmitted through specimens, because these are normally constructed of thick and dense materials such as steel. Additionally, most radiographic sources must be portable to permit use in field locations. On the negative side it must be mentioned that studies undertaken abroad conclude that the most important factors contributing to unsafe operations are human related. Careful planning of the method of work is essential if unnecessary risks are to be avoided. The most effective way of reducing accidents would seem to be to train employees to adhere to established and well documented procedures, to exercise common sense and sound judgement, and to use the protective equipment and devices provided in the manner specified. 2 tabs., 3 refs

  5. The industry commitment to global transport safety standards

    International Nuclear Information System (INIS)

    Green, L.

    2004-01-01

    Standards and regulations have no intrinsic practical effect without taking into account those who are the object of such standards and regulations. Standards and regulations do not become operationally effective until they are implemented by the entities which are subject to them. Accordingly, there is a necessary synergy between the regulator and the regulated - the regulators whose task it is to make and enforce the rules for safe, efficient and reliable transport, and those whose job it is to transport within the rules. One has no full meaning without the other. Harmonisation issues which can impede efficient and timely implementation of regulations can occur at any stage of the process, starting with the timely publication of the IAEA Regulations, incorporation by the modal organisations, adoption by national competent authorities and finally, rendered operational by industrial transport organisations. Both, the regulator and the transporter, can be more effective in achieving their purposes when they co-operate in the interest of mutual understanding. PATRAM provides one excellent opportunity for such exchange between the regulator and the regulated - there are other important opportunities within the IAEA and international modal organisations. I suggest, however, that more could be done between the regulators and the regulated collectively to share real-life experiences with actually implementing the regulations and operating within them, and to draw appropriate lessons. In the case of the international transport safety regulatory regime, it is the nuclear transport industry, such as represented by the World Nuclear Transport Institute (WNTI), which is, of course, the object of transport safety standards and regulations. And as such, the nuclear transport industry is a principal stakeholder in the regime. Regulatory compliance is a cornerstone of the nuclear transport industry. The international nature of the fuel cycle mandates transnational movement of

  6. The industry commitment to global transport safety standards

    International Nuclear Information System (INIS)

    Green, L.

    2004-01-01

    Standards and regulations have no intrinsic practical effect without taking into account those who are the object of such standards and regulations. Standards and regulations do not become operationally effective until they are implemented by the entities which are subject to them. Accordingly, there is a necessary synergy between the regulator and the regulated-the regulators whose task it is to make and enforce the rules for safe, efficient and reliable transport, and those whose job it is to transport within the rules. One has no full meaning without the other. Harmonisation issues which can impede efficient and timely implementation of regulations can occur at any stage of the process, starting with the timely publication of the IAEA regulations, incorporation by the modal organisations, adoption by national competent authorities and finally, rendered operational by industrial transport organisations. Both the regulator and the transporter can be more effective in achieving their purposes when they cooperate in the interest of mutual understanding. PATRAM provides one excellent opportunity for such exchange between the regulator and the regulated-there are other important opportunities within the IAEA and international modal organisations. It is suggested, however, that more could be done between the regulators and the regulated collectively to share real-life experiences with actually implementing the regulations and operating within them, and to draw appropriate lessons. In the case of the international transport safety regulatory regime, it is the nuclear transport industry, such as represented by the World Nuclear Transport Institute (WNTI), which is, of course, the object of transport safety standards and regulations. And as such, the nuclear transport industry is a principal stakeholder in the regime. Regulatory compliance is a cornerstone of the nuclear transport industry. The international nature of the fuel cycle mandates transnational movement of

  7. The industry commitment to global transport safety standards

    Energy Technology Data Exchange (ETDEWEB)

    Green, L. [World Nuclear Transport Inst., London (United Kingdom)

    2004-07-01

    Standards and regulations have no intrinsic practical effect without taking into account those who are the object of such standards and regulations. Standards and regulations do not become operationally effective until they are implemented by the entities which are subject to them. Accordingly, there is a necessary synergy between the regulator and the regulated - the regulators whose task it is to make and enforce the rules for safe, efficient and reliable transport, and those whose job it is to transport within the rules. One has no full meaning without the other. Harmonisation issues which can impede efficient and timely implementation of regulations can occur at any stage of the process, starting with the timely publication of the IAEA Regulations, incorporation by the modal organisations, adoption by national competent authorities and finally, rendered operational by industrial transport organisations. Both, the regulator and the transporter, can be more effective in achieving their purposes when they co-operate in the interest of mutual understanding. PATRAM provides one excellent opportunity for such exchange between the regulator and the regulated - there are other important opportunities within the IAEA and international modal organisations. I suggest, however, that more could be done between the regulators and the regulated collectively to share real-life experiences with actually implementing the regulations and operating within them, and to draw appropriate lessons. In the case of the international transport safety regulatory regime, it is the nuclear transport industry, such as represented by the World Nuclear Transport Institute (WNTI), which is, of course, the object of transport safety standards and regulations. And as such, the nuclear transport industry is a principal stakeholder in the regime. Regulatory compliance is a cornerstone of the nuclear transport industry. The international nature of the fuel cycle mandates transnational movement of

  8. "DEAR ROCK, WHAT'S YOUR DESTINY? Ancient and modern uses of rocks in industry, building and art."

    Science.gov (United States)

    Pennesi, Daniela

    2015-04-01

    The project is for students of first grade of secondary school. The activity is a game, virtual or real of associations between rock and soil samples with their uses in industry, building and art. The students, alone or in a team, have to form pairs having available various samples of rocks, soils and building materials as bags of cement, tiles.. They have images of colonnades, staircases of famous churches, cave paintings and colors. The project is multidisciplinary. During the activity, the teachers of art and technical education are involved with and the teacher of sciences. The game can be used as an introduction for the rocks' classification. The inquiry in team, is a good way to learn the several uses of mineral resources.

  9. Delivering and Evaluating On-Line Degree Programs in Culinary Arts/Management: A Survey of Educators and Industry Practitioners

    Science.gov (United States)

    Ryll, Stefan

    2017-01-01

    This quantitative research examines the perceptions of culinary arts/management educators and culinary industry practitioners on the future of online culinary arts education. Specifically pertaining to the recommended procedures by educators and chefs to judge and critique the quality of food products in terms sensory modalities, and what the key…

  10. ARTS

    DEFF Research Database (Denmark)

    Mahadevan, Shankar; Virk, Kashif M.; Madsen, Jan

    2007-01-01

    and load conditions, consequences of different task mappings to processors (software or hardware) including memory and power usage, and effects of RTOS selection, including scheduling, synchronization and resource allocation policies. We present the application and platform models of ARTS as well...

  11. Alternatives and challenges in optimizing industrial safety using genetic algorithms

    International Nuclear Information System (INIS)

    Martorell, Sebastian; Sanchez, Ana; Carlos, Sofia; Serradell, Vicente

    2004-01-01

    Safety (S) improvement of industrial installations leans on the optimal allocation of designs that use more reliable equipment and testing and maintenance activities to assure a high level of reliability, availability and maintainability (RAM) for their safety-related systems. However, this also requires assigning a certain amount of resources (C) that are usually limited. Therefore, the decision-maker in this context faces in general a multiple-objective optimization problem (MOP) based on RAMS+C criteria where the parameters of design, testing and maintenance act as decision variables. Solutions to the MOP can be obtained by solving the problem directly, or by transforming it into several single-objective problems. A general framework for such MOP based on RAMS+C criteria is proposed in this paper. Then, problem formulation and fundamentals of two major groups of resolution alternatives are presented. Next, both alternatives are implemented in this paper using genetic algorithms (GAs), named single-objective GA and multi-objective GA, respectively, which are then used in the case of application to solve the problem of testing and maintenance optimization based on unavailability and cost criteria. The results show the capabilities and limitations of both approaches. Based on them, future challenges are identified in this field and guidelines provided for further research

  12. A health and safety survey of Irish funeral industry workers.

    LENUS (Irish Health Repository)

    Kelly, N

    2012-02-01

    BACKGROUND: Those handling deceased individuals, including the funeral industry, face a variety of health and safety hazards including occupationally acquired infectious disease. AIMS: To identify the knowledge, attitudes and beliefs of Irish funeral industry workers towards occupational hazards and infectious disease in 2009. METHODS: The sample analysed consisted of all listed member premises of the Irish Association of Funeral Directors as at 1 July 2009. A postal survey was sent to each premises in July 2009, with two rounds of follow-up reviews sent to non-responders. Four main areas were covered--occupational hazards, embalming, industry expertise and demographics. The quantitative and qualitative results were analysed to assess knowledge, attitudes and beliefs. Data collection was completed on 31 December 2009. RESULTS: Two hundred and thirty listed member premises were contacted. Twenty-two were unsuitable for the survey. One hundred and thirty-eight valid replies were received from 130 premises, representing a premises response rate of 63% (130\\/208). Seventy-three premises (56%) identified themselves as embalmers. Embalmers had variable vaccine uptake and variable knowledge, attitude and beliefs towards embalming those with blood-borne viruses. Fifteen per cent of respondents reported a work-related injury, back injury being the most common. Splash and sharps injuries were reported as a work-related injury, and infections believed to be work related were also reported. CONCLUSIONS: This study demonstrates widespread occupational health concerns among this professional group. It confirms the need for occupational health advice and services. There is also a strong desire for regulation of this profession in Ireland.

  13. 77 FR 36606 - Pipeline Safety: Government/Industry Pipeline Research and Development Forum, Public Meeting

    Science.gov (United States)

    2012-06-19

    ...: Threat Prevention --Working Group 2: Leak Detection/Mitigation & Storage --Working Group 3: Anomaly... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID PHMSA-2012-0146] Pipeline Safety: Government/Industry Pipeline Research and Development Forum, Public...

  14. Role of industry in the environmental health and safety aspects of the developing Plowshare industry

    Energy Technology Data Exchange (ETDEWEB)

    Hilberry, N [University of Arizona (United States)

    1969-07-01

    lt is first pointed out that no person or organization has a more vital interest in the early establishment of an effective health and safety program within which commercial operations based on Plowshare technology can be carried on with assurance than does that facet of industry which is directly involved in the attempt to prove out these Plowshare applications. The formulation of such a code must be a matter of the highest priority to all concerned. To accomplish this task successfully, however, requires the exercise of a truly hard-nosed objectivity both on the part of the Governmental agencies who bear statutory responsibility for ensuring the public health and safety and also on that of the industrial groups who are trying to realize the significant economic potentials inherent in the Plowshare technology. While it is abundantly clear that achievement of a sound and reliable public health and safety code is imperative for both regulatory agencies and operating industry, it must also be recognized that both groups serve the inescapable additional responsibility of acting as the public's trustees to assure the healthy development of a new technology which may well prove to be of vital importance to the Nation. The basic nature of the joint operating procedure required in order to provide an effective way of fulfilling these common obligations is then examined. The discussion then turns to the present stage of the developmental progress of the potential Plowshare industry. Scientific breakthrough has long since been accomplished and scientific feasibility has been quite generally proven. For a number of important possible applications even technological feasibility has been established. In these cases the demonstration of economic feasibility and the attainment of public acceptance are the two factors that still remain to be achieved before a full-fledged if still infant industry becomes a reality. Industry alone is capable of determining economic feasibility. It

  15. Role of industry in the environmental health and safety aspects of the developing Plowshare industry

    International Nuclear Information System (INIS)

    Hilberry, N.

    1969-01-01

    lt is first pointed out that no person or organization has a more vital interest in the early establishment of an effective health and safety program within which commercial operations based on Plowshare technology can be carried on with assurance than does that facet of industry which is directly involved in the attempt to prove out these Plowshare applications. The formulation of such a code must be a matter of the highest priority to all concerned. To accomplish this task successfully, however, requires the exercise of a truly hard-nosed objectivity both on the part of the Governmental agencies who bear statutory responsibility for ensuring the public health and safety and also on that of the industrial groups who are trying to realize the significant economic potentials inherent in the Plowshare technology. While it is abundantly clear that achievement of a sound and reliable public health and safety code is imperative for both regulatory agencies and operating industry, it must also be recognized that both groups serve the inescapable additional responsibility of acting as the public's trustees to assure the healthy development of a new technology which may well prove to be of vital importance to the Nation. The basic nature of the joint operating procedure required in order to provide an effective way of fulfilling these common obligations is then examined. The discussion then turns to the present stage of the developmental progress of the potential Plowshare industry. Scientific breakthrough has long since been accomplished and scientific feasibility has been quite generally proven. For a number of important possible applications even technological feasibility has been established. In these cases the demonstration of economic feasibility and the attainment of public acceptance are the two factors that still remain to be achieved before a full-fledged if still infant industry becomes a reality. Industry alone is capable of determining economic feasibility. It

  16. Copyright and Industrial Design, How a Line Should be Drawn? Works of Applied Arts, its Protection in Colombia

    Directory of Open Access Journals (Sweden)

    David Felipe Álvarez Amézquita

    2015-07-01

    Full Text Available As works of applied arts have been situated normally at the grey area between copyright and industrial property, this article discusses three different approaches about how they should be protected. It particularly focuses on the case of industrial designs which might be considered as copyrighted works. Subject to the fulfilment of copyright criterions and particularly the requisites for works of art and for the work of applied arts, the article proposes that Colombian and Andean Communitarian Law should embrace the partial accumulation system of protection for such creations.

  17. Project for the completion of a probabilistic safety analysis of an industrial irradiation

    International Nuclear Information System (INIS)

    Ferro, R.; Troncoso, M.

    1995-01-01

    The probabilistic safety analysis is a very valuable instrument in safety studies of facilities with potential risk for the personnel, population and environment. One of the possible field of use of PSA techniques in the safety studies for industrial irradiation where serious accidents have occurred. For this reason a project has been undertaken to carry out the PSA in the Irradiation Plant of Research Institute of the Food Industry, which complements the safety studies of this facility

  18. Forklift safety a practical guide to preventing powered industrial truck incidents and injuries

    CERN Document Server

    Swartz, George

    1999-01-01

    Written for the more than 1.5 million powered industrial truck operators and supervisors in general industry, as well as those in the construction and marine industries, this Second Edition provides an updated guide to training operators in safety and complying with OSHA's 1999 forklift standard. This edition of Forklift Safety includes a new chapter devoted to the new OSHA 1910.178 standard and new information regarding dock safety, narrow aisle trucks, off-dock incidents, tip-over safety, pallet safety, and carbon monoxide.

  19. Incorporating Workplace Injury to Measure the Safety Performance of Industrial Sectors in Taiwan

    Directory of Open Access Journals (Sweden)

    Li-Ting Yeh

    2017-12-01

    Full Text Available The severity of workplace injuries varies by industry. Information on workplace injuries can enable firms and governments to effectively improve their safety performance based on the specific contexts of each industry. Incorporating the three workplace injury rates (being wounded or ill, disability, and death, a data envelopment analysis (DEA model is developed to evaluate the safety performance of 17 industrial sectors in Taiwan. The results suggest that the Taiwanese government should pay particular attention to the mining and quarrying industry, which has the lowest safety performance. Additionally, the results provide abundant information for the Taiwanese government to design industry safety regulations in a way that may prompt firms to develop a sustainable economy by improving their health and safety practices and enhancing their overall safety performance.

  20. Industrial safety and applied health physics. Annual report for 1980

    International Nuclear Information System (INIS)

    1981-11-01

    Information is reported in sections entitled: radiation monitoring; Environmental Management Program; radiation and safety surveys; industrial safety and special projects; Office of Operational Safety; and training, lectures, publications, and professional activities. There were no external or internal exposures to personnel which exceeded the standards for radiation protection as defined in DOE Manual Chapter 0524. Only 35 employees received whole body dose equivalents of 10 mSv (1 rem) or greater. There were no releases of gaseous waste from the Laboratory which were of a level that required an incident report to DOE. There were no releases of liquid radioactive waste from the Laboratory which were of a level that required an incident report to DOE. The quantity of those radionuclides of primary concern in the Clinch River, based on the concentration measured at White Oak Dam and the dilution afforded by the Clinch River, averaged 0.16 percent of the concentration guide. The average background level at the Perimeter Air Monitoring (PAM) stations during 1980 was 9.0 μrad/h (0.090 μGy/h). Soil samples were collected at all perimeter and remote monitoring stations and analyzed for eleven radionuclides including plutonium and uranium. Plutonium-239 content ranged from 0.37 Bq/kg (0.01 pCi/g) to 1.5 Bq/kg (0.04 pCi/g), and the uranium-235 content ranged from 0.7 Bq/kg (0.02 pCi/g) to 16 Bq/kg (0.43 pCi/g). Grass samples were collected at all perimeter and remote monitoring stations and analyzed for twelve radionuclides including plutonium and uranium. Plutonium-239 content ranged from 0.04 Bq/kg (0.001 pCi/g) to 0.07 Bq/kg (0.002 pCi/g), and the uranium-235 content ranged from 0.37 Bq/kg (0.01 pCi/g) to 12 Bq/kg

  1. A study for safety and health management problem of semiconductor industry in Taiwan.

    Science.gov (United States)

    Chao, Chin-Jung; Wang, Hui-Ming; Feng, Wen-Yang; Tseng, Feng-Yi

    2008-12-01

    The main purpose of this study is to discuss and explore the safety and health management in semiconductor industry. The researcher practically investigates and interviews the input, process and output of the safety and health management of semiconductor industry by using the questionnaires and the interview method which is developed according to the framework of the OHSAS 18001. The result shows that there are six important factors for the safety and health management in Taiwan semiconductor industry. 1. The company should make employee clearly understand the safety and health laws and standards. 2. The company should make the safety and health management policy known to the public. 3. The company should put emphasis on the pursuance of the safety and health management laws. 4. The company should prevent the accidents. 5. The safety and health message should be communicated sufficiently. 6. The company should consider safety and health norm completely.

  2. Factors Contribute to Safety Culture in the Manufacturing Industry in Malaysia

    OpenAIRE

    Ong Choon Hee

    2014-01-01

    The purpose of this paper is to explain the role of safety culture in the manufacturing industry in Malaysia and identify factors contribute to safety culture. It is suggested in this study that leadership support, management commitment and safety management system are important factors that contribute to safety culture. This study also provides theoretical implications to guide future research and offers practical implications to the managers in the development of safety culture. Given that ...

  3. The Impact of Occupational Safety on Logistics and Automation in Industrial Plants

    OpenAIRE

    Botti, Lucia

    2017-01-01

    Research on workplace health and safety analyses the integration of work practices with safety, health and wealth of people at work. The aim of occupational safety is to realize a safe and health work environment, eliminating or reducing the risks for workers' safety and health. The objective of this thesis is the study, integration, development and application of innovative approaches and models for decision-making support in the context of occupational safety in industrial plants and lo...

  4. Safety Leadership Defined within the Australian Construction Industry

    OpenAIRE

    Daniel, Luke

    2015-01-01

    This research explores the tenets of safety leadership within the Australian construction environment. The scope of this research aims to establish a universal definition of safety leadership and how it differs from other leadership disciplines. The literature review into this topic was governed by the parent disciplines of Safety and Leadership.  Gaps were identified in the literature that indicated safety leadership is not a well-defined concept and much of the work into safety leadership h...

  5. Safety evaluation of filamentous fungi isolated from industrial doenjang koji.

    Science.gov (United States)

    Lee, Jin Hee; Jo, Eun Hye; Hong, Eun Jin; Kim, Kyung Min; Lee, Inhyung

    2014-10-01

    A few starters have been developed and used for doenjang fermentation but often without safety evaluation. Filamentous fungi were isolated from industrial doenjang koji, and their potential for mycotoxin production was evaluated. Two fungi were isolated; one was more dominantly present (90%). Both greenish (SNU-G) and whitish (SNU-W) fungi showed 97% and 95% internal transcribed spacer sequence identities to Aspergillus oryzae/flavus, respectively. However, the SmaI digestion pattern of their genomic DNA suggested that both belong to A. oryzae. Moreover, both fungi had morphological characteristics similar to that of A. oryzae. SNU-G and SNU-W did not form sclerotia, which is a typical characteristic of A. oryzae. Therefore, both fungi were identified to be A. oryzae. In aflatoxin gene cluster analysis, both fungi had norB-cypA genes similar to that of A. oryzae. Consistent with this, aflatoxins were not detected in SNU-G and SNU-W using ammonia vapor, TLC, and HPLC analyses. Both fungi seemed to have a whole cyclopiazonic acid (CPA) gene cluster based on PCR of the maoA, dmaT, and pks-nrps genes, which are key genes for CPA biosynthesis. However, CPA was not detected in TLC and HPLC analyses. Therefore, both fungi seem to be safe to use as doenjang koji starters and may be suitable fungal candidates for further development of starters for traditional doenjang fermentation.

  6. Safety-Culture Exploration in Taiwan’s Metal Industries: Identifying the Workers’ Background Influence on Safety Climate

    Directory of Open Access Journals (Sweden)

    Shu-Chiang Lin

    2017-10-01

    Full Text Available The present study aims to assess the safety-climate level in Taiwan’s metal industries, as well as to identify the influence of workers’ backgrounds on the safety climate. An earlier report showed that a poor safety culture was related to the cause of accidents in Taiwan’s traditional manufacturing industries. This study surveyed a total of 839 workers who voluntarily participated and completed the safety-culture questionnaires. These workers were from a Taiwanese metal company and its five satellite companies. Three safety-climate factors, namely safety perception, safety communication and safety-management systems, were assessed. Confirmatory factor analysis (CFA was conducted by developing structural equation modeling to ensure the questionnaire’s validity. The influence of workers’ backgrounds on the safety climate was identified by using one-way ANOVA. The reliability result of the questionnaire was above the acceptable level. The overall safety-climate score was 4.22 out of a five-point scale for safety perception, 4.23 for safety-management systems and 3.97 for safety communication. The scores indicate a good level of safety climate, with room for improvement in safety communication. Additionally, the influence of workers’ backgrounds on the safety climate was confirmed. Based on the validity test, it was also found that the questionnaire could be improved by reconstructing its questions in its development process in order to increase the safety-climate model’s reliability and validity, as well as its model fit.

  7. Safety Culture & Beliefs in the Nuclear Industry: Looking Forward, Looking Back

    International Nuclear Information System (INIS)

    Cox, S.

    2016-01-01

    This Keynote considers the role that the notion of safety culture has played in management of safety in the nuclear industry over recent decades. It does so through the lens of the industry’s beliefs about how such a notion might be applied to better understanding and preventing safety failures. Over the last 30 years, the nuclear industry has come to accept both the concept of safety culture and the possible role that it might play in safety management and safety failure. This development is to be welcomed in general terms but is not without its shortcomings in practice. These largely concern the operationalization of the concept and the way that it is often measured and managed. So what are the issues around the way that much of the industry currently believes that the notion of safety should be applied? The Keynote addresses this question. In doing so, it explores the changes that might be necessary for a fair test of the utility of safety culture in determining the quality of safety management and performance. The final point raised in this Keynote, is fundamental but missed by some. However cast, measured and managed, the concept of safety culture was never promoted as the sole determinant of safety management or the sole reason for safety failure. Therefore, judging the utility of the concept in relation to the quality of safety management in the nuclear industry can only be done logically in the context of those of the other factors involved. (author)

  8. Cooperative conflict and contested space: a case study of risk and safety in the steel industry.

    OpenAIRE

    2008-01-01

    This dissertation is a journey into the world of risk and safety in the steel industry. The problem statement that is explored in this study relates to the nature of the relationship between safety performance and stakeholders in the steel industry, the nature of the relationships between different stakeholders and the way in which these relationships impact on risk management strategies. The author contends that safety is not a normative or procedural system within the workplace, but rather ...

  9. An overview of applications and radiation safety aspects of linear accelerators in Brazilian industry

    International Nuclear Information System (INIS)

    Lourenco, M.J.M.; Silva, F.C.A. da

    2002-01-01

    This work presents a brief description of the situation of Brazilian Regulatory Authority about safety control on Industrial Linear Accelerators Installations. It shows the national regulatory infrastructure responsible for radiation safety inspections, the regulation infrastructure, the national inventory of industrial installations, the national system of inspection and enforcement and the national system for qualifying the radiation protection officer. Some results of regulatory safety inspections are also showed in this work. (author)

  10. Children employed in the performing arts, advertising and fashion industry: what legal protection do they have?

    Science.gov (United States)

    Clin, Bénédicte; Ferrant, Ophélie; Marquignon, Marie-France; Letourneux, Marc

    2009-09-01

    Ill-treatment can sometimes take on an unfamiliar face. Particularly, this is the case for certain types of child employment. In France, as in most European countries, there are laws for protecting children and guaranteeing their right to schooling. Over and above the frequently observed apprenticeship contracts, obtained by eligible under 16 years, there is also the dispensatory case of children employed in the performing arts, advertising and the fashion industry. In France, legislators take the child's vulnerability into account when developing legislative and regulatory mechanisms, concerning the modalities of his/her professional activity, particularly in artistic fields and in fashion modelling. Since both may employ very young children, or even infants, one essential question ought to be raised: from a legal point of view, are these children sufficiently protected, with regard to the potential physical and psychological consequences of their particular professional activities?

  11. A survey of approaches combining safety and security for industrial control systems

    International Nuclear Information System (INIS)

    Kriaa, Siwar; Pietre-Cambacedes, Ludovic; Bouissou, Marc; Halgand, Yoran

    2015-01-01

    The migration towards digital control systems creates new security threats that can endanger the safety of industrial infrastructures. Addressing the convergence of safety and security concerns in this context, we provide a comprehensive survey of existing approaches to industrial facility design and risk assessment that consider both safety and security. We also provide a comparative analysis of the different approaches identified in the literature. - Highlights: • We raise awareness of safety and security convergence in numerical control systems. • We highlight safety and security interdependencies for modern industrial systems. • We give a survey of approaches combining safety and security engineering. • We discuss the potential of the approaches to model safety and security interactions

  12. Evaluation of safety practices and performance in a brewery industry ...

    African Journals Online (AJOL)

    Michael Horsfall

    prevented in the period of the safety programme which translates to an average of 19.45 per year. The safety programme ... due to “weak safeguards against occupational and .... outputs within such a system. In this ..... Journal of Disaster Prevention and Management: ... Duignan, T. (2003), “Good health and safety is good.

  13. Industrial Fuel Gas Demonstration Plant Program. Task III, Demonstration plant safety, industrial hygiene, and major disaster plan (Deliverable No. 35)

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-03-01

    This Health and Safety Plan has been adopted by the IFG Demonstration Plant managed by Memphis Light, Gas and Water at Memphis, Tennessee. The plan encompasses the following areas of concern: Safety Plan Administration, Industrial Health, Industrial Safety, First Aid, Fire Protection (including fire prevention and control), and Control of Safety Related Losses. The primary objective of this plan is to achieve adequate control of all potentially hazardous activities to assure the health and safety of all employees and eliminate lost work time to both the employees and the company. The second objective is to achieve compliance with all Federal, state and local laws, regulations and codes. Some thirty specific safe practice instruction items are included.

  14. A Systematic Analysis of Functional Safety Certification Practices in Industrial Robot Software Development

    Directory of Open Access Journals (Sweden)

    Tong Xie

    2017-01-01

    Full Text Available For decades, industry robotics have delivered on the promise of speed, efficiency and productivity. The last several years have seen a sharp resurgence in the orders of industrial robots in China, and the areas addressed within industrial robotics has extended into safety-critical domains. However, safety standards have not yet been implemented widely in academia and engineering applications, particularly in robot software development. This paper presents a systematic analysis of functional safety certification practices in software development for the safety-critical software of industrial robots, to identify the safety certification practices used for the development of industrial robots in China and how these practices comply with the safety standard requirements. Reviewing from Chinese academic papers, our research shows that safety standards are barely used in software development of industrial robot. The majority of the papers propose various solutions to achieve safety, but only about two thirds of the papers refer to non-standardized approaches that mainly address the systematic level rather than the software development level. In addition, our research shows that with the development of artificial intelligent, an emerging field is still on the quest for standardized and suitable approaches to develop safety-critical software.

  15. 75 FR 14609 - Commercial Fishing Industry Vessel Safety Advisory Committee; Vacancies

    Science.gov (United States)

    2010-03-26

    ... which Chapter 45 of Title 46, U.S.C. applies and persons representing the marine insurance industry... Industry Vessel Safety Advisory Committee; Vacancies AGENCY: Coast Guard, DHS. ACTION: Request for applications. SUMMARY: The Coast Guard seeks applications for membership on the Commercial Fishing Industry...

  16. The Safety Attitudes of Senior Managers in the Chinese Coal Industry

    Directory of Open Access Journals (Sweden)

    Jiangshi Zhang

    2016-11-01

    Full Text Available Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5, and six were at a relatively high level (4.5 > mean > 4.0. Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

  17. The Safety Attitudes of Senior Managers in the Chinese Coal Industry.

    Science.gov (United States)

    Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

    2016-11-17

    Introduction: Senior managers' attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers' attitudes towards safety in the Chinese coal industry. Method : We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions : Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers' safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers' unions not playing their role effectively. Practical Applications : We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

  18. The Safety Attitudes of Senior Managers in the Chinese Coal Industry

    Science.gov (United States)

    Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

    2016-01-01

    Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry. PMID:27869654

  19. Computerized systems for on-line management of failures: a state-of-the-art discussion of alarm systems and diagnostic systems applied in the nuclear industry

    International Nuclear Information System (INIS)

    Kim, I.S.

    1994-01-01

    It is now well perceived in the nuclear industry that improving plant information systems is vital for enhancing the operational safety of nuclear power plants. Considerable work is underway worldwide to support operators' decision-making, particularly in their difficult tasks of managing process anomalies on-line. The work includes development of (1) advanced alarm systems, such as various kinds of computer-based alarm processing systems, Critical Function Monitoring System, Success Path Monitoring System and Safety Assessment System II, and (2) real-timer diagnostic systems, such as Disturbance Analysis System, Maryland Operator Advisory System II, Model-Integrated Diagnostic Analysis System, Diagnosis System using Knowledge Engineering Technique, Detailed Diagnosis, and Operator Advisor System. This paper presents a state-of-the-art review of plant information systems for on-line management of failures in nuclear power plants, focusing on the methodological features of computerized alarm systems and diagnostic systems. (author)

  20. Multilevel Safety Climate and Safety Performance in the Construction Industry: Development and Validation of a Top-Down Mechanism

    Directory of Open Access Journals (Sweden)

    Ran Gao

    2016-11-01

    Full Text Available The character of construction projects exposes front-line workers to dangers and accidents. Safety climate has been confirmed to be a predictor of safety performance in the construction industry. This study aims to explore the underlying mechanisms of the relationship between multilevel safety climate and safety performance. An integrated model was developed to study how particular safety climate factors of one level affect those of other levels, and then affect safety performance from the top down. A questionnaire survey was administered on six construction sites in Vietnam. A total of 1030 valid questionnaires were collected from this survey. Approximately half of the data were used to conduct exploratory factor analysis (EFA and the remaining data were submitted to structural equation modeling (SEM. Top management commitment (TMC and supervisors’ expectation (SE were identified as factors to represent organizational safety climate (OSC and supervisor safety climate (SSC, respectively, and coworkers’ caring and communication (CCC and coworkers’ role models (CRM were identified as factors to denote coworker safety climate (CSC. SEM results show that OSC factor is positively related to SSC factor and CSC factors significantly. SSC factor could partially mediate the relationship between OSC factor and CSC factors, as well as the relationship between OSC factor and safety performance. CSC factors partially mediate the relationship between OSC factor and safety performance, and the relationship between SSC factor and safety performance. The findings imply that a positive safety culture should be established both at the organizational level and the group level. Efforts from all top management, supervisors, and coworkers should be provided to improve safety performance in the construction industry.

  1. Multilevel Safety Climate and Safety Performance in the Construction Industry: Development and Validation of a Top-Down Mechanism.

    Science.gov (United States)

    Gao, Ran; Chan, Albert P C; Utama, Wahyudi P; Zahoor, Hafiz

    2016-11-08

    The character of construction projects exposes front-line workers to dangers and accidents. Safety climate has been confirmed to be a predictor of safety performance in the construction industry. This study aims to explore the underlying mechanisms of the relationship between multilevel safety climate and safety performance. An integrated model was developed to study how particular safety climate factors of one level affect those of other levels, and then affect safety performance from the top down. A questionnaire survey was administered on six construction sites in Vietnam. A total of 1030 valid questionnaires were collected from this survey. Approximately half of the data were used to conduct exploratory factor analysis (EFA) and the remaining data were submitted to structural equation modeling (SEM). Top management commitment (TMC) and supervisors' expectation (SE) were identified as factors to represent organizational safety climate (OSC) and supervisor safety climate (SSC), respectively, and coworkers' caring and communication (CCC) and coworkers' role models (CRM) were identified as factors to denote coworker safety climate (CSC). SEM results show that OSC factor is positively related to SSC factor and CSC factors significantly. SSC factor could partially mediate the relationship between OSC factor and CSC factors, as well as the relationship between OSC factor and safety performance. CSC factors partially mediate the relationship between OSC factor and safety performance, and the relationship between SSC factor and safety performance. The findings imply that a positive safety culture should be established both at the organizational level and the group level. Efforts from all top management, supervisors, and coworkers should be provided to improve safety performance in the construction industry.

  2. Safety Leadership Defined within the Australian Construction Industry

    Directory of Open Access Journals (Sweden)

    Luke Daniel

    2015-11-01

    Full Text Available This research explores the tenets of safety leadership within the Australian construction environment. The scope of this research aims to establish a universal definition of safety leadership and how it differs from other leadership disciplines. The literature review into this topic was governed by the parent disciplines of Safety and Leadership.  Gaps were identified in the literature that indicated safety leadership is not a well-defined concept and much of the work into safety leadership has been borrowed from other schools of leadership. An exploratory research methodology was utilised which rooted the research into the post-positivist methodology. There were twenty interviews conducted for this research, with participants coming from various leadership positions across multiple construction projects around Australia. Findings detailed a saturation of data that allowed for an empirical definition towards safety leadership to be established. As a person’s scope of responsibility increases, their view of safety leadership becomes synonymous with leadership; although differences do exist. These differences were attributed to the importance of demonstrating safety and working within the legal framework of Australian construction projects. It is proposed that this research offers a substantial contribution to knowledge, based upon a well-defined definition into safety leadership.

  3. Evaluation model for safety capacity of chemical industrial park based on acceptable regional risk

    Institute of Scientific and Technical Information of China (English)

    Guohua Chen; Shukun Wang; Xiaoqun Tan

    2015-01-01

    The paper defines the Safety Capacity of Chemical Industrial Park (SCCIP) from the perspective of acceptable regional risk. For the purpose of exploring the evaluation model for the SCCIP, a method based on quantitative risk assessment was adopted for evaluating transport risk and to confirm reasonable safety transport capacity of chemical industrial park, and then by combining with the safety storage capacity, a SCCIP evaluation model was put forward. The SCCIP was decided by the smaller one between the largest safety storage capacity and the maximum safety transport capacity, or else, the regional risk of the park will exceed the acceptable level. The developed method was applied to a chemical industrial park in Guangdong province to obtain the maximum safety transport capacity and the SCCIP. The results can be realized in the regional risk control of the park effectively.

  4. Associations between safety climate and safety management practices in the construction industry.

    Science.gov (United States)

    Marín, Luz S; Lipscomb, Hester; Cifuentes, Manuel; Punnett, Laura

    2017-06-01

    Safety climate, a group-level measure of workers' perceptions regarding management's safety priorities, has been suggested as a key predictor of safety outcomes. However, its relationship with actual injury rates is inconsistent. We posit that safety climate may instead be a parallel outcome of workplace safety practices, rather than a determinant of workers' safety behaviors or outcomes. Using a sample of 25 commercial construction companies in Colombia, selected by injury rate stratum (high, medium, low), we examined the relationship between workers' safety climate perceptions and safety management practices (SMPs) reported by safety officers. Workers' perceptions of safety climate were independent of their own company's implementation of SMPs, as measured here, and its injury rates. However, injury rates were negatively related to the implementation of SMPs. Safety management practices may be more important than workers' perceptions of safety climate as direct predictors of injury rates. © 2017 Wiley Periodicals, Inc.

  5. Safety in times of crises - the importance of industrial emergency plans

    International Nuclear Information System (INIS)

    Rademacher, H.; Schulten, R.

    1989-01-01

    Technical and organizational precautions cannot always avoid everyday risks such as accidents, fire, explosions, and other critical situations which without appropriate countermeasures can easily develop into emergencies. While in recent years considerable efforts have been going into improving the technical safety of industrial plants particularly susceptible to accidents (e.g. the nuclear and chemical industry), organizational safety seems to have been neglected. An analysis of different accidents reveals human fallibility rather than technical failures to be causing damage in many cases. Industrial emergency plans are considered to be contributing to the improvement of organizational safety. (orig.) [de

  6. Responsibility for managing and legal consequences in the field of industrial safety

    International Nuclear Information System (INIS)

    Buedenbender, U.

    1987-01-01

    The object of industrial safety is to protect the aspirations, the life and the health of the employee from injury and by accident prevention in the field to combat dangers to life and health. The necessity for industrial safety is just as uncontentious as the objectives pursued by it. There is also a humanitarian connotation here since the health and welfare of employees are of central importance. In addition, economic aspects have to be taken into consideration, for industrial accidents mean unnecessary industrial costs which can have not insignificant economic consequences. Boards of directors, heads of various departments in the hierarchy, also the members of those departments must be absolutely clear as to what are the requirements for industrial safety in detail, what consequences arise for the introduction and organization of industrial processes right through the organization of the enterprise itself and how in this respect responsibilities are to be allocated to those affected. (orig.) [de

  7. Designing continuous safety improvement within chemical industrial areas

    NARCIS (Netherlands)

    Reniers, G.L.L.; Ale, B. J.M.; Dullaert, W.; Soudan, K.

    This article provides support in organizing and implementing novel concepts for enhancing safety on a cluster level of chemical plants. The paper elaborates the requirements for integrating Safety Management Systems of chemical plants situated within a so-called chemical cluster. Recommendations of

  8. Workplace Safety and Health Topics: Industries and Occupations

    Science.gov (United States)

    ... Submit Search The CDC The National Institute for Occupational Safety and Health (NIOSH) Note: Javascript is disabled or is not ... September 6, 2017 Content source: National Institute for Occupational Safety and Health Education and Information Division Email Recommend Tweet YouTube ...

  9. Improving and streamlining the workflow in the graphic arts and printing industry

    Science.gov (United States)

    Tuijn, Chris

    2003-01-01

    In order to survive in the economy of today, an ever-increasing productivity is required from all the partners participating in a specific business process. This is not different for the printing industry. One of the ways to remain profitable is, on one hand, to reduce costs by automation and aiming for large-scale projects and, on the other hand, to specialize and become an expert in the area in which one is active. One of the ways to realize these goals is by streamlining the communication of the different partners and focus on the core business. If we look at the graphic arts and printing industry, we can identify different important players that eventually help in the realization of printed material. For the printing company (as is the case for any other company), the most important player is the customer. This role can be adopted by many different players including publishers, companies, non-commercial institutions, private persons etc. Sometimes, the customer will be the content provider as well but this is not always the case. Often, the content is provided by other organizations such as design and prepress agencies, advertising companies etc. In most printing organizations, the customer has one contact person often referred to as the CSR (Customers Service Representative). Other people involved at the printing organization include the sales representatives, prepress operators, printing operators, postpress operators, planners, the logistics department, the financial department etc. In the first part of this article, we propose a solution that will improve the communication between all the different actors in the graphic arts and printing industry considerably and will optimize and streamline the overall workflow as well. This solution consists of an environment in which the customer can communicate with the CSR to ask for a quote based on a specific product intent; the CSR will then (after the approval from the customer's side) organize the work and brief

  10. The promotion of work safety. A continuous task for the Swiss gas industry

    International Nuclear Information System (INIS)

    Luescher, H.J.

    1993-01-01

    The modern Western European population values the work safety very highly because of ethical and economical reasons. In Switzerland too, safety at work is actively promoted. Based on national legislation and on the SGWA-Association Statutes, the Swiss Gas Industry, with great engagement, promotes the measures for accident prevention. Following a general introduction into the legislative basis, possible ways and means for the promotion of safety at work are described. Subsequently, the concrete activities of the Gas Supply Authorities and the SGWA are pointed out, followed by a description of the future work-safety programmes of the Swiss Gas Industry. (orig.) [de

  11. Control of Industrial Safety Based on Dynamic Characteristics of a Safety Budget-Industrial Accident Rate Model in Republic of Korea

    Directory of Open Access Journals (Sweden)

    Gi Heung Choi

    2017-06-01

    Conclusion: A simple feedback control with proportional–integral action is effective in prevention of industrial accidents. Securing a lower level of elastic industrial accident-driving energy appears to have dominant effects on the control performance compared with the damping effort to dissipate such energy. More attention needs to be directed towards physical and social feedbacks that have prolonged cumulative effects. Suggestions for further improvement of the safety system including physical and social feedbacks are also made.

  12. Structural and optical features of state-of-the-art industrial solar cells and units on their basis

    International Nuclear Information System (INIS)

    Bykov, M.; Mazinov, A.; Bykov, A.

    2005-01-01

    In this paper presenting experimental research for solar energy production the day time is defined, using state-of-the-art industrial photo-electric converters (PEC) on the basis of crystalline silicon. Based on the obtained practical results, it has been constructed an experimental solar energy device. The device has been tested for a year and and its characteristics have been investigated

  13. State-of-the-Art Report on Pilot Operated Safety Relief Valve

    International Nuclear Information System (INIS)

    Lee, Jun; Yoon, Ju Hyeon

    2003-12-01

    The pilot operated safety relief valve(POSRV) is a overpressure protection device. But the POSRV is additionally designed to be functioned as a fast depressurization device differently from the pressurizer safety valve(PSV). So, the POSRV assembly takes on the complicated configuration differently from the PSV, and also its configuration and component parts are much different according to its manufacturers. The objective of the study is to investigate the state of the art for POSRV. We want that the findings of the study are put to practical use as a selection guide to the utilities or system designers which want to purchase the POSRV. In this study, we selected the SEBIM and CCI made goods as the subject of investigation, and have investigated the technical characteristics and operating principles of the goods. However, in this report, the comparative contents with other company which were issued by one company were not handled. Also the advantages or disadvantages between two companies were not handled. Only the technical characteristics and operating principles with each company were described. For reference, the main considerations to select the POSRV' type are follows. - the characteristics of the system that the POSRV is to be installed - the fitness of the POSRV for the system - the requirements related to the function and operation of the POSRV - the vender's opinion

  14. Industry

    International Nuclear Information System (INIS)

    Schindler, I.; Wiesenberger, H.

    2001-01-01

    This chapter of the environmental control report deals with the environmental impact of the industry in Austria. It gives a review of the structure and types of the industry, the legal framework and environmental policy of industrial relevance. The environmental situation of the industry in Austria is analyzed in detail, concerning air pollution (SO 2 , NO x , CO 2 , CO, CH 4 , N 2 O, NH 3 , Pb, Cd, Hg, dioxin, furans), waste water, waste management and deposit, energy and water consumption. The state of the art in respect of the IPPC-directives (European Integrated Pollution Prevention and Control Bureau) concerning the best available techniques of the different industry sectors is outlined. The application of European laws and regulations in the Austrian industry is described. (a.n.)

  15. Deliberations on nuclear safety regulatory system in a changing industrial environment

    International Nuclear Information System (INIS)

    Kim, H.J.

    2001-01-01

    Nuclear safety concern, which may accompany such external environmental factors as privatization and restructuring of the electric power industry, is emerging as an international issue. In order to cope with the concern about nuclear safety, it is important to feedback valuable experiences of advanced countries that restructured their electric power industries earlier and further to reflect the current safety issues, which are raised internationally, fully into the nuclear safety regulatory system. This paper is to review the safety issues that might take place in the process of increasing competition in the nuclear power industry, and further to present a basic direction and effective measures for ensuring nuclear safety in response thereto from the viewpoint of safety regulation. It includes a political direction for a regulatory body's efforts to rationalize and enforce efficiently its regulation. It proposes to ensure that regulatory specialty and regulatory cost are stably secured. Also, this paper proposes maintaining a sound nuclear safety regulatory system to monitor thoroughly the safety management activities of the industry, which might be neglected as a result of focusing on reduction of the cost for producing electric power. (author)

  16. Evaluating safety-critical organizations - emphasis on the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Reiman, Teemu; Oedewald, Pia (VTT, Technical Research Centre of Finland (Finland))

    2009-04-15

    An organizational evaluation plays a key role in the monitoring, as well as controlling and steering, of the organizational safety culture. If left unattended, organizations have a tendency to gradually drift into a condition where they have trouble identifying their vulnerabilities and mechanisms or practices that create or maintain these vulnerabilities. The aim of an organizational evaluation should be to promote increased understanding of the sociotechnical system and its changing vulnerabilities. Evaluation contributes to organizational development and management. Evaluations are used in various situations, but when the aim is to learn about possible new vulnerabilities, identify organizational reasons for problems, or prepare for future challenges, the organization is most open to genuine surprises and new findings. It is recommended that organizational evaluations should be conducted when - there are changes in the organizational structures - new tools are implemented - when the people report increased workplace stress or a decreased working climate - when incidents and near-misses increase - when work starts to become routine - when weak signals (such as employees voicing safety concerns or other worries, the organization 'feels' different, organizational climate has changed) are perceived. In organizations that already have a high safety level, safety managers work for their successors. This means that they seldom see the results of their successful efforts to improve safety. This is due to the fact that it takes time for the improvement to become noticeable in terms of increased measurable safety levels. The most challenging issue in an organizational evaluation is the definition of criteria for safety. We have adopted a system safety perspective and we state that an organization has a high potential for safety when - safety is genuinely valued and the members of the organization are motivated to put effort on achieving high levels of safety

  17. Recommended safety guides for industrial laboratories and shops

    Science.gov (United States)

    Allison, W. W.

    1971-01-01

    Booklet provides references to 29 publications providing information on hazard control and approved safety practices. Areas include pressurized gas and vacuum systems. Guidelines are presented for safeguarding facilities where machinery, equipment, electrical devices, or hazardous chemicals are used.

  18. Evaluating safety-critical organizations - emphasis on the nuclear industry

    International Nuclear Information System (INIS)

    Reiman, Teemu; Oedewald, Pia

    2009-04-01

    An organizational evaluation plays a key role in the monitoring, as well as controlling and steering, of the organizational safety culture. If left unattended, organizations have a tendency to gradually drift into a condition where they have trouble identifying their vulnerabilities and mechanisms or practices that create or maintain these vulnerabilities. The aim of an organizational evaluation should be to promote increased understanding of the sociotechnical system and its changing vulnerabilities. Evaluation contributes to organizational development and management. Evaluations are used in various situations, but when the aim is to learn about possible new vulnerabilities, identify organizational reasons for problems, or prepare for future challenges, the organization is most open to genuine surprises and new findings. It is recommended that organizational evaluations should be conducted when - there are changes in the organizational structures - new tools are implemented - when the people report increased workplace stress or a decreased working climate - when incidents and near-misses increase - when work starts to become routine - when weak signals (such as employees voicing safety concerns or other worries, the organization 'feels' different, organizational climate has changed) are perceived. In organizations that already have a high safety level, safety managers work for their successors. This means that they seldom see the results of their successful efforts to improve safety. This is due to the fact that it takes time for the improvement to become noticeable in terms of increased measurable safety levels. The most challenging issue in an organizational evaluation is the definition of criteria for safety. We have adopted a system safety perspective and we state that an organization has a high potential for safety when - safety is genuinely valued and the members of the organization are motivated to put effort on achieving high levels of safety - it is

  19. Safety analysis in the high risk industry: Similarities and differences with the nuclear approach

    International Nuclear Information System (INIS)

    Vilaragut LLanes, Juan Jose; Castillo Alvarez, Jorge Patricio

    2001-01-01

    In this article shows a conceptual aspects to the risk safety analysis, comparing them with the focus to the nuclear industry that has been characterized to be the pioneers in their systematized application

  20. Provision of radiation safety at the designing of the industrial complex of solid radwaste management (ICSRM)

    International Nuclear Information System (INIS)

    Lobach, S.Yu.; Sevastyuk, O.V.

    2003-01-01

    The article presents the basic principles and criteria of the radiation safety provision, organization of the radiation control system, and dose calculation for the staff irradiation at the construction and operation of the Industrial complex of solid radwaste management (ICSRM)

  1. Safety in the East: a political and industrial challenge

    International Nuclear Information System (INIS)

    Vesseron, P.

    1995-01-01

    Nuclear power is still an issue in the East, and there is a long way to go before the situation will become satisfactory. The most complicated part is the transfer of safety culture, which will be a much longer and trickier task than modernizing the facilities. This transfer calls for long-term cooperation among entities playing the same roles in the East and West. Europe has clearly understood this situation, and has organized its assistance program in such a way as to promote this cooperation on concrete issues. One good example of what a global assistance strategy should be is the Moshouse project, involving electricians, builders, and safety organization in intimate long-term cooperation, while facilitating early shutdown of the riskier reactors. For the IPSN, cooperation with the other TSO's (Technical Safety Organizations) is the main strategy line for all action taken in the East. Starting from situations where the IPSN and its partners in the West enjoy almost direct support from the local authorities, the purpose is to spawn and foster competence within the country by cooperative safety research and by developing analytical tools for accident situations. When the moment comes, if the local political determination and the economic situation so permit, the safety authorities will then be able to ensure the development of the safety culture on their own, in their own country. (author)

  2. SongMakers: An Industry-Led Approach to Arts Partnerships in Education

    Science.gov (United States)

    Hunter, Mary Ann; Broad, Tina; Jeanneret, Neryl

    2018-01-01

    Reported benefits of arts partnerships with schools range from improvements in students' motivation and engagement in learning to teachers' increased confidence in teaching the arts, and strengthened school and community relationships. Yet, in the scholarship on arts partnerships to date, limited critical attention has been given to the impact of…

  3. MANAGEMENT PROCESS OF HEALTH AND SAFETY RISK IN THE NIGERIA CONSTRUCTION INDUSTRY

    OpenAIRE

    Akwu, Ifeoma Claris

    2017-01-01

    The study examined the state of health and safety risk management practices in the building sector of the construction industry with the objective to examine the health and safety risk management processes adopted by the construction industry in Nigeria; the study adopted the survey and case study research design. It employed the use of Delphi’s technique in the distribution of questionnaire and made use of chi-square analytical technique for the analysis of gathered data. The findings reveal...

  4. Safety guide of safe use of industrial radiography

    International Nuclear Information System (INIS)

    1994-01-01

    The objective of this guidance is to present general regulations for the safe use and radiation protection of industrial radiography. Storage and inspection of apparatus, personal instructions for working in radiography facilities are offered

  5. Risk and safety in the nuclear industry and conventional norms of society

    International Nuclear Information System (INIS)

    Tadmor, J.

    1977-01-01

    The societal acceptance of various risks is analyzed and rules of risk acceptance as a function of different parameters (e. g., expected benefit, intensity of effect) are spelled out. The monetary value of a human life is estimated, based on investments in safety of different human activities. The acceptable risks and safety investments in different human activities are then compared with risks and safety investments of the nuclear industry. Safety investments required to reduce radioactivity releases and risks from nuclear power stations to ALAP (as low as practiable) levels are taken as a study case. It is found that risks in the nuclear industry are several orders of magnitude lower and safety investments per human life saved are several orders of magnitude higher, as compared with risks and safety investments in other human activities

  6. Assessment of Native Languages for Food Safety Training Programs for Meat Industry Employees

    Science.gov (United States)

    Olsen, Sherrlyn S.; Cordray, Joseph C.; Sapp, Stephen; Sebranek, Joseph G.; Anderson, Barbara; Wenger, Matt

    2012-01-01

    Challenges arise when teaching food safety to culturally diverse employees working in meatpacking and food manufacturing industries. A food safety training program was developed in English, translated into Spanish, and administered to 1,265 adult learners. Assessments were conducted by comparing scores before and immediately following training.…

  7. Revolutionizing safety and security in the chemical and process industry: applying the CHESS concept

    NARCIS (Netherlands)

    Reniers, G.L.L.M.E.; Khakzad Rostami, N.

    2017-01-01

    This paper argues that a new concept, summarized as ‘CHESS’, should be used in the chemical industry to further substantially advance safety (where we use the term in a broad sense, that is, safety and physical security, amongst others). The different domains that need to be focused upon, and where

  8. 77 FR 75439 - Guidances for Industry and Investigators on Safety Reporting Requirements for Investigational New...

    Science.gov (United States)

    2012-12-20

    ...] Guidances for Industry and Investigators on Safety Reporting Requirements for Investigational New Drug Applications and Bioavailability/Bioequivalence Studies, and a Small Entity Compliance Guide; Availability... Reporting Requirements for INDs and BA/BE Studies'' and ``Safety Reporting Requirements for INDs and BA/BE...

  9. Proceedings of the Seminar on Environmental and Radiation Safety Aspect at Non-nuclear Industry

    International Nuclear Information System (INIS)

    Mulyadi Rachmad; Muhammad Fathoni; Topo Suprihadi, PY.; Dumais, Johannes Robert; Eri Hiswara; Alatas, Zubaidah; Dahlan, Kgs.; Muhammad Isnaini

    2003-03-01

    The Seminar on Environmental and Radiation Safety Aspect at Non-nuclear Industry held on March 2003 in Jakarta. The purpose of this Seminar be able to information exchange among research workers in National Nuclear Energy Agency. The Seminar discussed about Science and Technology of Radiation Safety and Environment. There are 17 papers which have separated index. (PPIN)

  10. INDUSTRIAL TRAINING AND TRAINING IN SAFETY, A STATEMENT BY THE CENTRAL TRAINING COUNCIL. MEMORANDUM NUMBER 2.

    Science.gov (United States)

    Ministry of Labour, London (England).

    THE TRAINING OF WORKERS IN SAFETY AND IN SAFE METHODS OF WORK IS AN ESSENTIAL PART OF ACCIDENT PREVENTION. IT IS A MANAGEMENT RESPONSIBILITY TO DO THIS, AND, TO BE EFFECTIVE, MANAGEMENT ITSELF MUST BE CONVINCED OF THE NEED FOR SAFETY TRAINING. IT SHOULD BE CARRIED OUT AS PART OF THE NORMAL TRAINING WHICH ALL ENTRANTS TO INDUSTRY RECEIVE. THE…

  11. The health and safety concerns of immigrant women workers in the Toronto sportswear industry.

    Science.gov (United States)

    Gannagé, C M

    1999-01-01

    Immigrant women's conditions of work have worsened with new government and managerial strategies to restructure the Canadian apparel industry. Changes in occupational health and safety legislation have both given and taken away tools that immigrant women workers could use to improve the quality of their working lives. The author outlines a methodology for eliciting the health and safety concerns of immigrant women workers.

  12. Nuclear Safety R and D Programs and trend in the U. S. Utility Industry

    International Nuclear Information System (INIS)

    Kim, Jong Hyun

    1992-01-01

    First of all, the deterministic approach to safety analysis, which had dominated safety research in the earlier years, has given much ground to probabilistic approach. Secondly, human factors analysis has become an important part of safety research. Third, safety research relevant to reliability, or safety combined with reliability, are gradually taking place of purely safety-oriented or stand-alone safety research. More and more nuclear utilities in the U. S. are integrating safety with reliability. This evolution is in part due to the successful completion of major safety testing and analyses of deterministic nature, and partially due to the utility industry's desire to harvest synergistic nature, and partially due to the utility industry's desire to harvest synergistic results by combining safety with reliability, as the utility industry is more and more concerned about reducing operation and maintenance costs by enhancing reliability while maintaining plant safety. Nuclear safety is a complex and comprehensive concept, defying a simple categorization or interpretation. Thus, research and development in nuclear safety is necessarily diverse, and the program areas and trend presented in this paper are not meant to be all inclusive. For instance, there are some other active areas that were not mentioned, such as seismic risk assessment program and others. Nuclear safety research and development activities have undergone a perceptible shift of emphasis in recent years. They have become more focused and product-oriented. Also, except for the severe accident analysis, the emphasis on prevention and mitigation of accident, rather than analyzing the consequences of accident, is very much in evidence; that is, reliability-based technologies using PIRA methodology, and upgrading of instrumentation and control technologies are in the main stream of activities

  13. Integrated occupational safety and health management solutions and industrial cases

    CERN Document Server

    Häkkinen, Kari; Niskanen, Toivo

    2015-01-01

    Maximizing reader insights into a new movement toward leadership approaches that are collaborated and shared,  and which views Occupational Safety and Health (OSH) and performance excellence within the wider examination of leadership relationships and practices, this book argues that these relationships and processes are so central to the establishment of OSH functioning that studying them warrants a broad, cross-disciplinary, multiple method analysis. Exploring the complexity of leadership by the impact that contexts (e.g., national and organizational culture) may have on leaders, this book discusses the related literature, then moves forward to show how a more comprehensive practical approach to Occupational Safety and Health and performance excellence can function on levels pertaining to events, individuals, groups, and organizations. This book proposes that greater clarity in understanding leadership in Occupational Safety and Health and performance excellence can be developed from addressing two fundame...

  14. Issues of Safety and Security: New Challenging to Malaysia Tourism Industry

    OpenAIRE

    Mohd Ayob Norizawati; Masron Tarmiji

    2014-01-01

    The safety and security issues nowadays become one of the forces causing changes in tourism industry in era of millennium. The main concern of this issues more focus on crime rates, terrorism, food safety, health issues and natural disaster. This topic gained the popularity in tourism research after 9/11 tragedy and since then the academicians and practitioners started seeking the best solution in ways to mitigate these negative impacts. For Malaysia, the image as safety and secure destinatio...

  15. Modernization of safety system for the radiation facility for industrial sterilization

    International Nuclear Information System (INIS)

    Drndarevic, V.; Djuric, D.; Koturovic, A.; Arandjelovic, M.; Mikic, R.

    1995-01-01

    Modernization of the existing safety system of the radiation facility for industrial sterilization at the Vinca Institute of nuclear science is done. In order to improve radiation safety of the facility, the latest recommendations and requirements of IAEA have been implemented. Concept and design of the modernized system are presented. The new elements of the safety system are described and the improvements achieved by means of this modernization are pointed out. (author)

  16. Assessing risks and regulating safety standards in the oil and gas industry: the Peruvian experience.

    OpenAIRE

    Arturo Leonardo Vásquez Cordano; Julio Salvador Jácome; Raúl Lizardo García Carpio; Victor Fernández Guzman

    2013-01-01

    Environmental regulation has usually focused on controlling continuous sources of pollution such as CO2 emissions through carbon taxes. However, the 2010 oil spill in the Gulf of Mexico has shown that accidents associated to safety failures can also generate bursts of pollution with serious environmental consequences. Regulating safety conditions to prevent accidents in the oil and gas industry is challenging because public regulators cannot perfectly observe whether firms comply with safety ...

  17. Compliance as process: Work safety in the Chinese construction industry

    NARCIS (Netherlands)

    Li, Na

    2016-01-01

    China is facing a key challenge of achieving compliance in many regulatory areas. Responding to such issue, this research reports on an exploratory empirical study of how the regulated construction businesses comply with work safety rules in China. Building on the existing literature, it develops a

  18. Safety performance indicators in the metallurgical industry using WEB programming

    Directory of Open Access Journals (Sweden)

    M. Cioca

    2017-01-01

    Full Text Available Sustainable development has a significant impact today in Romania and worldwide. In this context, risk assessment becomes mandatory for enterprises. This paper analyzes the situation of occupational risks in the metallurgical industry in the European Union, Romania, and the United States and highlights the main causes for work accidents in Romanian metallurgical industry. The analysis covers the period 2010 - 2016. The data collected from Romania is compared to the data related to the European Union and the United States. Moreover, the paper aims to present an occupational risk assessment tool, which is customizable for each area of activity. The last section of the paper discusses the research results and limitations.

  19. Safe or sorry: Feds criminalize safety breaches, while industry record improves with time

    Energy Technology Data Exchange (ETDEWEB)

    Collison, M.

    2004-05-01

    An overview of safety conditions in Canada's oilpatch is provided, inclusive of a review of historical developments of safety practices by the industry itself, and evolving safety legislation by the provincial and federal governments. The general picture that emerges is that while great strides have been made in legislation, training and safety practices, incidents still occur; employees are still injured and sometimes die. In 2003, for example, there were almost 156,000 work-related injuries reported; of these more than 39,000 were serious enough for the worker to miss work beyond the day of the accident. Nearly 52,000 of the injured workers were inexperienced. There were 127 workplace fatalities; of these eight workers were under the age of 25. Vehicle collisions were the source of the greatest number of accidents; 25 per cent of all work-related deaths were due to traffic trauma. The oil and gas industry spawns an incredible range of hazards; everything from bear maulings and badger holes to sour gas leaks, people falling or equipment falling on them, or workers getting caught in moving equipment parts. The federal and provincial governments are major actors in the field of occupational safety, while the industry provides industry-recommended practices through the Petroleum Safety Council. The Council has also developed a basic safety awareness training package to provide smaller companies with effective training tools, and special programs targeted to the needs of new workers and international employees, in an effort to bridge differences in cultural attitudes towards the work environment. English language competence of newcomers to Canada is an area of special concern to the industry, along with a wide variety of safety training programs run by the Petroleum Industry Training Service. The Work Safe Alberta Information Sharing Network (www.worksafely.org) is another useful tool in gaining access to safety consultants, safety e-tools, and safety related

  20. State of the art of CATHARE model for transient safety analysis of ASTRID SFR

    International Nuclear Information System (INIS)

    Lavastre, R.; Conti, A.; Marsault, Ph.; Chenaud, M.S.; Tosello, A.

    2014-01-01

    Within the framework of the ASTRID project (Advanced Sodium Technological Reactor for Industrial Demonstration), the conceptual design studies are being conducted in accordance with the GEN IV reactor objectives, particularly in terms of improving safety. This involves enhancing the general design in order to : - increase the safety margins for all unprotected-loss-of-flow (ULOF) and unprotected-loss-of-heat-sink (ULOHS) transients, - identify the need for additional safety devices that would complement core natural behavior so that temperature criteria on coolant, core and primary circuit structures can remain under the safety criteria. For this purpose, the use of CATHARE system code has been very important from the early stage of design in order to ensure a feedback for design teams to improve behavior during unprotected transients. Until 2012, CATHARE ULOxx transient calculations have been used mainly to compare different core designs. They contributed to lead to the choice of CFV core (axially heterogeneous core with an upper sodium plenum employed to achieve a negative sodium void reactivity worth). Meanwhile, models for an accurate core description and transients have been developed in CATHARE to improve the calculations towards best estimate calculations for safety analysis. This paper therefore presents these main developments in core modeling achieved for the 2 past years. For instance, we will focus on the way of dealing with fuel assemblies that have to be grouped together in the CATHARE code to form a channel with similar neutronic physics and thermal-hydraulics characteristics. We will also explain the way we deal with heterogeneity of fuel pin to obtain the accurate fuel temperature along the axis and to take into account pellet-cladding gap state. These two points have a great importance on feedback effects linked to the fuel, mainly the Doppler effect. The paper will finally introduce the upcoming improvements that are under development nowadays

  1. Radiation safety training for industrial irradiators: What are we trying to accomplish?

    International Nuclear Information System (INIS)

    Smith, M.A.

    1998-01-01

    Radiation safety training at an industrial irradiator facility takes a different approach than the traditional methods and topics used at other facilities. Where the more routine industrial radiation users focus on standard training topics of contamination control, area surveys, and the traditional dogma of time, distance, and shielding, radiation safety in an industrial irradiation facility must be centered on preventing accidents. Because the primary methods for accomplishing that goal are engineering approaches such as safety system interlocks, training provided to facility personnel should address system operation and emergency actions. This presents challenges in delivering radiation safety training to an audience of varied educational and technical background where little to no commercially available training material specific to this type of operation exists

  2. Measuring structural (un)safety in the Dutch building industry

    NARCIS (Netherlands)

    Terwel, K.C.; Waarts, P; E Rademaeker, de

    2010-01-01

    The last 10 years the Dutch Building Industry was shocked by several major accidents. In 2001 the steel structure of a theatre in Hoorn collapsed during erection. No one was hurt, because it collapsed during the night. In 2002 part of the parking deck of a hotel collapsed just some time after a

  3. Development and validation of a new safety climate scale for petrochemical industries.

    Science.gov (United States)

    Jafari, Mohammad Javad; Eskandari, Davood; Valipour, Firouz; Mehrabi, Yadollah; Charkhand, Hossein; Mirghotbi, Mostafa

    2017-01-01

    While a considerable body of research has studied safety climate and its role as a leading indicator of organizational safety, much of this work has been conducted with Western manufacturing samples. The current study puts emphasis on the cross-validation of a safety climate model in the non-Western industrial context of Iranian petrochemical industries. The current study was performed in one petrochemical company in Iran. The scale was developed through conducting a literature review followed by a qualitative study with expert participation. After performing a screening process, the initial number of items on the scale was reduced to 68. Ten dimensions (including management commitment, workers' empowerment, communication, blame culture, safety training, job satisfaction, interpersonal relationship, supervision, continuous improvement, and reward system) together with 37 items were extracted from the exploratory factor analysis (EFA) to measure safety climate. Acceptable ranges of internal consistency statistics for the sub-scales were observed. Confirmatory factor analysis (CFA) confirmed the construct validity of the developed safety climate scale for the petrochemical industry workers. The results of reliability showed that the Cronbach's alpha coefficient for the designed scale was 0.94. The ICC was obtained 0.92. This study created a valid and reliable scale for measuring safety climate in petrochemical industries.

  4. Modeling the Relationship between Safety Climate and Safety Performance in a Developing Construction Industry: A Cross-Cultural Validation Study.

    Science.gov (United States)

    Zahoor, Hafiz; Chan, Albert P C; Utama, Wahyudi P; Gao, Ran; Zafar, Irfan

    2017-03-28

    This study attempts to validate a safety performance (SP) measurement model in the cross-cultural setting of a developing country. In addition, it highlights the variations in investigating the relationship between safety climate (SC) factors and SP indicators. The data were collected from forty under-construction multi-storey building projects in Pakistan. Based on the results of exploratory factor analysis, a SP measurement model was hypothesized. It was tested and validated by conducting confirmatory factor analysis on calibration and validation sub-samples respectively. The study confirmed the significant positive impact of SC on safety compliance and safety participation , and negative impact on number of self-reported accidents/injuries . However, number of near-misses could not be retained in the final SP model because it attained a lower standardized path coefficient value. Moreover, instead of safety participation , safety compliance established a stronger impact on SP. The study uncovered safety enforcement and promotion as a novel SC factor, whereas safety rules and work practices was identified as the most neglected factor. The study contributed to the body of knowledge by unveiling the deviations in existing dimensions of SC and SP. The refined model is expected to concisely measure the SP in the Pakistani construction industry, however, caution must be exercised while generalizing the study results to other developing countries.

  5. Evolution of Industry Knowledge in the Public Domain: Prior Art Searching for Software Patents

    Directory of Open Access Journals (Sweden)

    Jinseok Park

    2005-03-01

    Full Text Available Searching prior art is a key part of the patent application and examination processes. A comprehensive prior art search gives the inventor ideas as to how he can improve or circumvent existing technology by providing up to date knowledge on the state of the art. It also enables the patent applicant to minimise the likelihood of an objection from the patent office. This article explores the characteristics of prior art associated with software patents, dealing with difficulties in searching prior art due to the lack of resources, and considers public contribution to the formation of prior art databases. It addresses the evolution of electronic prior art in line with technological development, and discusses laws and practices in the EPO, USPTO, and the JPO in relation to the validity of prior art resources on the Internet. This article also investigates the main features of searching sources and tools in the three patent offices as well as non-patent literature databases. Based on the analysis of various searching databases, it provides some strategies of efficient prior art searching that should be considered for software-related inventions.

  6. Health protection and industrial safety. Nuclear power plants

    International Nuclear Information System (INIS)

    1987-03-01

    The standard applies to components of the primary circuit including its auxiliary facilities, and of the secondary circuit of nuclear power plants with pressurized water reactors; to lifting gear and load take-ups for the transport of nuclear fuel and primary circuit components; to elevators within the containment, electrical installations, and piping and valves of radiation protection monitoring equipment. Part 1 defines the terms and specifies engineered safety requirements

  7. Safety regulations of radiation sources in industry in the Philippines

    Energy Technology Data Exchange (ETDEWEB)

    Borras, A M [Licensing and Evaluation Section, Nuclear Regulations Licensing and Safeguards Division, Philippine Nuclear Research Institute, Diliman, Quezon City (Philippines)

    1992-12-31

    The Philippine Nuclear Research Institute (PNRI) by virtue of Republic Act 2067, as amended, Republic Act 5207 and Executive Order 128 (1987), was mandated to advance and regulate the safe and peaceful applications of nuclear science and technology in the Philippines. The PNRI was formerly the Philippine Atomic Energy Commission established in 1958. This report aims to share the experiences of the PNRI on licensing and regulating the safe use of radioactive materials in industry, particularly in industrial gamma radiography, nuclear gauges and radioactive tracers. It enumerates the licensing and enforcement procedures. Some common problems encountered in the licensing and enforcement activities and comments of future plans to resolve the problems were also discussed. (Author).

  8. Safety regulations of radiation sources in industry in the Philippines

    International Nuclear Information System (INIS)

    Borras, A.M.

    1991-01-01

    The Philippine Nuclear Research Institute (PNRI) by virtue of Republic Act 2067, as amended, Republic Act 5207 and Executive Order 128 (1987), was mandated to advance and regulate the safe and peaceful applications of nuclear science and technology in the Philippines. The PNRI was formerly the Philippine Atomic Energy Commission established in 1958. This report aims to share the experiences of the PNRI on licensing and regulating the safe use of radioactive materials in industry, particularly in industrial gamma radiography, nuclear gauges and radioactive tracers. It enumerates the licensing and enforcement procedures. Some common problems encountered in the licensing and enforcement activities and comments of future plans to resolve the problems were also discussed. (Author)

  9. Radiation safety needs for the resurgent uranium mining industry

    International Nuclear Information System (INIS)

    Waggitt, Peter

    2008-01-01

    Full text: After many years in the economic doldrums the world's uranium industry is undergoing a renaissance. The recent rapid price increase for the product and the anticipated market shortfalls in supply of yellowcake have are responsible for this. There is now a rush of new activity: abandoned mines from a previous era are being re-examined for their potential to be re-opened; planning for exploitation of known but undeveloped uranium deposits is proceeding at a rapid pace in many countries new to uranium mining; and finally worldwide exploration activity for uranium is expanding at a great rate with more than 400 companies now claiming to be involved in the uranium mining market. All of there activities have significant implications the radiation protection profession. At every stage of the uranium production cycle, from exploration to mining and processing through to remediation there are requirements for proper radiation protection procedures and regulation. The long period of reduced activity in uranium mining has meant that few young people have been joining the industry over the past 20 years. There is now a shortage of trained and experienced radiation protection professionals associated with the mining industry that cannot be overcome overnight. The paper discusses the development of this situation and the various strategies that are being put in place around the world to improve the situation. In particular the International Atomic Energy Agency has been working with radiation protection authorities and uranium mining industry representatives from around the world to address the issue. The latest developments in this project will be described and the future plans described. (author)

  10. Safety and reliability in industrial organizations - The key factors

    International Nuclear Information System (INIS)

    Cooke, R.A.; Sarkis, H.D.

    1992-01-01

    A survey-based technique has been developed that measures and generates comparative data on important organizational, work group, and job-level variables that are directly related to on-the-job accidents. This paper describes the results of an analysis of data from more than 2,700 employees in the chemical, oil, construction, and wood products industries. These analyses indicate that several key variables are significantly related to accidents in the workplace

  11. Infant and maternal health monitoring using a combined Nordic database on ART and safety

    DEFF Research Database (Denmark)

    Henningsen, Anna-Karina A; Romundstad, Liv Bente; Gissler, Mika

    2011-01-01

    Objective. To evaluate infant and maternal health after assisted reproductive technology (ART), using data on over 90 000 ART children and their mothers in Denmark, Finland, Norway and Sweden, which have been combined and will be compared with a control group of spontaneously conceived children...... on the mothers of ART children can be used to study risks during pregnancy and obstetric complications after ART. Methods. A personal identification number given to all Nordic residents allows cross-linkage of the national health registers and enables long-term follow-up of ART children. The medical birth...

  12. Health protection and industrial safety. Nuclear power plants

    International Nuclear Information System (INIS)

    1987-03-01

    The standard applies to primary circuit components including its auxiliary facilities, and of the secondary circuit of nuclear power plants with pressurized water reactors; to lifting gear and load take-ups for the transport of nuclear fuel and primary circuit components; to elevators within the containment, and to electrical installations. Part 3 specifies the behaviour of workers in conformity with safety provisions during operation, inspection, lifetime surveillance, functional testing, and maintenance. Special demands are made on the water regime and on elevators, lifting gear, and load take-ups

  13. A multi-agent safety response model in the construction industry.

    Science.gov (United States)

    Meliá, José L

    2015-01-01

    The construction industry is one of the sectors with the highest accident rates and the most serious accidents. A multi-agent safety response approach allows a useful diagnostic tool in order to understand factors affecting risk and accidents. The special features of the construction sector can influence the relationships among safety responses along the model of safety influences. The purpose of this paper is to test a model explaining risk and work-related accidents in the construction industry as a result of the safety responses of the organization, the supervisors, the co-workers and the worker. 374 construction employees belonging to 64 small Spanish construction companies working for two main companies participated in the study. Safety responses were measured using a 45-item Likert-type questionnaire. The structure of the measure was analyzed using factor analysis and the model of effects was tested using a structural equation model. Factor analysis clearly identifies the multi-agent safety dimensions hypothesized. The proposed safety response model of work-related accidents, involving construction specific results, showed a good fit. The multi-agent safety response approach to safety climate is a useful framework for the assessment of organizational and behavioral risks in construction.

  14. A model of Occupational Safety and Health Management System (OSHMS) for promoting and controlling health and safety in textile industry.

    Science.gov (United States)

    Manimaran, S; Rajalakshmi, R; Bhagyalakshmi, K

    2015-01-01

    The development of Occupational Safety and Health Management System in textile industry will rejuvenate the workers and energize the economy as a whole. In India, especially in Tamil Nadu, approximately 1371 textile business is running with the help of 38,461 workers under Ginning, Spinning, Weaving, Garment and Dyeing sectors. Textile industry of contributes to the growth of Indian economy but it fails to foster education and health as key components of human development and help new democracies. The present work attempts to measure and develop OSHMS which reduce the hazards and risk involved in textile industry. Among all other industries textile industry is affected by enormous hazards and risk because of negligence by management and Government. It is evident that managements are not abiding by law when an accident has occurred. Managements are easily deceiving workers and least bothered about the Quality of Work Life (QWL). A detailed analysis of factors promoting safety and health to the workers has been done by performing confirmatory factor analysis, evaluating Risk Priority Number and the framework of OHMS has been conceptualized using Structural Equation Model. The data have been collected using questionnaire and interview method. The study finds occupation health for worker in Textile industry is affected not only by safety measure but also by technology and management. The work shows that difficulty in identifying the cause and effect of hazards, the influence of management in controlling and promoting OSHMS under various dimensions. One startling fact is existence of very low and insignificance correlation between health factors and outcome.

  15. Structural fabrication quality as a factor of industrial facilities safety

    Science.gov (United States)

    Tishkov, E. V.; Kardaev, E. M.; Stolbova, S. Yu; Shishova, O. S.

    2018-04-01

    In the conditions of industrial facilities high wear degree, it is very important to ensure the possibility of their safe operation in order to avoid various kinds of accidents and catastrophes. As practice shows, industrial plant collapses can occur suddenly under normal operating conditions. Usually, such accidents can take place at different stages of structures life cycle. One of the reasons for this is the initially low quality of reinforced concrete structures fabrication. The article considers the factors contributing to the collapse of reinforced concrete structures of water purification tanks located on the territory of the Omsk Region. The main surveys results on tank structures after collapse with the use of ultrasonic and physical methods of investigation are presented. On the basis of the obtained data analysis, it was found that the main cause of the accidents was the insufficient load-bearing capacity of typical reinforced concrete structures, caused by defects in their fabrication in the factory conditions because of exceeding the standard displacement from the design position of the working reinforcement. Recommendations are given on the identification of defective structures and the prevention of similar accidents when operating similar tanks at manufacturing plants constructed from standard designs.

  16. Scale development of safety management system evaluation for the airline industry.

    Science.gov (United States)

    Chen, Ching-Fu; Chen, Shu-Chuan

    2012-07-01

    The airline industry relies on the implementation of Safety Management System (SMS) to integrate safety policies and augment safety performance at both organizational and individual levels. Although there are various degrees of SMS implementation in practice, a comprehensive scale measuring the essential dimensions of SMS is still lacking. This paper thus aims to develop an SMS measurement scale from the perspective of aviation experts and airline managers to evaluate the performance of company's safety management system, by adopting Schwab's (1980) three-stage scale development procedure. The results reveal a five-factor structure consisting of 23 items. The five factors include documentation and commands, safety promotion and training, executive management commitment, emergency preparedness and response plan and safety management policy. The implications of this SMS evaluation scale for practitioners and future research are discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

  17. Industrial Safety and Applied Health Physics Division, annual report for 1982

    International Nuclear Information System (INIS)

    1983-12-01

    Activities during the past year are summarized for the Health Physics Department, the Environmental Management Department, and the Safety Department. The Health Physics Department conducts radiation and safety surveys, provides personnel monitoring services for both external and internal radiation, and procures, services, and calibrates appropriate portable and stationary health physics instruments. The Environmental Management Department insures that the activities of the various organizations within ORNL are carried out in a responsible and safe manner. This responsibility involves the measurement, field monitoring, and evaluation of the amounts of radionuclides and hazardous materials released to the environment and the control of hazardous materials used within ORNL. The department also collaborates in the design of ORNL Facilities to help reduce the level of materials released to the environment. The Safety Department is responsible for maintaining a high level of staff safety. This includes aspects of both operational and industrial safety and also coordinates the activities of the Director's Safety Review Committee

  18. Industrial Safety and Applied Health Physics Division, annual report for 1982

    Energy Technology Data Exchange (ETDEWEB)

    1983-12-01

    Activities during the past year are summarized for the Health Physics Department, the Environmental Management Department, and the Safety Department. The Health Physics Department conducts radiation and safety surveys, provides personnel monitoring services for both external and internal radiation, and procures, services, and calibrates appropriate portable and stationary health physics instruments. The Environmental Management Department insures that the activities of the various organizations within ORNL are carried out in a responsible and safe manner. This responsibility involves the measurement, field monitoring, and evaluation of the amounts of radionuclides and hazardous materials released to the environment and the control of hazardous materials used within ORNL. The department also collaborates in the design of ORNL Facilities to help reduce the level of materials released to the environment. The Safety Department is responsible for maintaining a high level of staff safety. This includes aspects of both operational and industrial safety and also coordinates the activities of the Director's Safety Review Committee. (ACR)

  19. Systematic impact of institutional pressures on safety climate in the construction industry.

    Science.gov (United States)

    He, Qinghua; Dong, Shuang; Rose, Timothy; Li, Heng; Yin, Qin; Cao, Dongping

    2016-08-01

    This paper explores how three types of institutional pressure (i.e., coercive, mimetic and normative pressures) systematically impact on the safety climate of construction projects. These impacts are empirically tested by survey data collected from 186 questionnaires of construction companies operating in Shanghai, China. The results, obtained by partial least squares analysis, show that organizational management commitment to safety and employee involvement is positively related to all three institutional pressures, while the perception of responsibility for safety and health is significantly influenced by coercive and mimetic pressure. However, coercive and normative pressures have no significant effect on the applicability of safety rules and work practices, revealing the importance of external organizational pressures in improving project safety climate from a systematic view. The findings also provide insights into the use of institutional forces to facilitate the improvement of safety climate in the construction industry. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Curing paints in mechanical industry, state of the art, optimization; Cuisson de peinture dans l`industrie mecanique, etat de l`art, optimisation

    Energy Technology Data Exchange (ETDEWEB)

    Brandon, B. [ERIC, (France)]|[CETIAT, Centre Technique des Industries Aerauliques et Thermiques, 69 - Villeurbanne (France)

    1996-12-31

    The thermal polymerization of paints, or curing, in the mechanical industry sector, is facing increasing constraints due to new coating characteristics, environmental issues and economical competitiveness. The various curing technologies (hot air, infrared radiations) are reviewed and an extensive analysis of 20 curing plants is presented: assessment of the energy performances of the plant, determination of the curing cycles, and evaluation of the coating quality. An optimized solution has been derived for a typical plant, showing a reduction in cycle times due to a mixed convection-infrared oven, and its energy efficiency is discussed

  1. Design of safety mechanism for an industrial manipulator based on passive compliance

    International Nuclear Information System (INIS)

    Kim, Hwi Su; Park, Jung Jun; Song, Jae Bok; Kyung, Jin Ho

    2010-01-01

    In recent years, collision safety between humans and robots has drawn much attention since human-robot cooperation is increasingly needed in various fields. Since positioning accuracy and collision safety are both important, an industrial manipulator should maintain very high stiffness for positioning accuracy in a normal situation, but exhibit very low stiffness when subjected to a collision force greater than the tolerance for human injury. To satisfy these requirements, we proposed in our previous research a safety mechanism composed of a linear spring and a double-slider mechanism for a service robot with a small payload. We modified this device to meet more stringent requirements for an industrial manipulator which usually has a payload higher than a service robot. Several experiments on static and dynamic collisions showed high stiffness of the safety mechanism in response to an external torque that was less than a predetermined threshold torque, but low stiffness that enabled absorption of the collision force when the external torque exceeded the threshold. Thus, positioning accuracy and collision safety were improved using the proposed design. Furthermore, a new safety criterion is suggested to verify the collision safety of a manipulator that uses the proposed safety mechanism

  2. Risk and safety in the nuclear industry and conventional norms of society

    International Nuclear Information System (INIS)

    Tadmor, J.

    In the present study the societal acceptance of various risks is analyzed and rules of risk acceptance as a function of different parameters are spelled out. The monetary value of a human life is estimated, based on investments in safety of different human activities. The acceptable risks and safety investments in different human activities are then compared with risks and safety investments of the nuclear industry. Safety investments required to reduce the radioactivity releases and risks from nuclear power stations to ALAP levels are taken as a study case. It is found that risks in the nuclear industry are several orders of magnitude lower and safety investments per human life saved are several orders of magnitude higher, as compared with risks and safety investments in other human activities. It is also shown that the incremental safety investments needed to further reduce the radiation doses in the environment during normal and continuous operation of nuclear plants are extravagantly high as compared to safety investments in other human activities and in other facets of human life. Considering that there is a limit to the economic means available, societal expenditures for reducing risks should by spread, as much as possible, over all human activities to get the maximum return from investments. (B.G.)

  3. The 'PROCESO' index: a new methodology for the evaluation of operational safety in the chemical industry

    International Nuclear Information System (INIS)

    Marono, M.; Pena, J.A.; Santamaria, J.

    2006-01-01

    The acknowledgement of industrial installations as complex systems in the early 1980s outstands as a milestone in the path to operational safety. Process plants are social-technical complex systems of a dynamic nature, whose properties depend not only on their components, but also on the inter-relations among them. A comprehensive assessment of operational safety requires a systemic approach, i.e. an integrated framework that includes all the relevant factors influencing safety. Risk analysis methodologies and safety management systems head the list of methods that point in this direction, but they normally require important plant resources. As a consequence, their use is frequently restricted to especially dangerous processes often driven by compliance with legal requirements. In this work a new safety index for the chemical industry, termed the 'Proceso' Index (standing for the Spanish terms for PROCedure for the Evaluation of Operational Safety), has been developed. PROCESO is based on the principles of systems theory, has a tree-like structure and considers 25 areas to guide the review of plant safety. The method uses indicators whose respective weight values have been obtained via an expert judgement technique. This paper describes the steps followed to develop this new Operational Safety Index, explains its structure and illustrates its application to process plants

  4. Modeling the factors affecting unsafe behavior in the construction industry from safety supervisors' perspective.

    Science.gov (United States)

    Khosravi, Yahya; Asilian-Mahabadi, Hassan; Hajizadeh, Ebrahim; Hassanzadeh-Rangi, Narmin; Bastani, Hamid; Khavanin, Ali; Mortazavi, Seyed Bagher

    2014-01-01

    There can be little doubt that the construction is the most hazardous industry in the worldwide. This study was designed to modeling the factors affecting unsafe behavior from the perspective of safety supervisors. The qualitative research was conducted to extract a conceptual model. A structural model was then developed based on a questionnaire survey (n=266) by two stage Structural Equation Model (SEM) approach. An excellent confirmed 12-factors structure explained about 62% of variances unsafe behavior in the construction industry. A good fit structural model indicated that safety climate factors were positively correlated with safety individual factors (Pconstruction workers' engagement in safe or unsafe behavior. In order to improve construction safety performance, more focus on the workplace condition is required.

  5. Work health and safety in cotton ginning industry: a survey of practices in australia

    International Nuclear Information System (INIS)

    Soomro, N.

    2015-01-01

    This survey focuses on the WH and S (Work Health and Safety) practices in Australia and relates them with those in Pakistan. It also highlights the planned areas of work required on WH and S in cotton ginning industry of Pakistan. This article is one a series of research studies that will inform a broader approach development. The aim of the survey was to design a standardized health and safety Act for cotton ginning industry of Pakistan and to help ginners meet their due industry obligations under the model WH and S Act. The first component of the research study survey was to review the relevant Australian work and safety model as this provides a framework to protect the health, safety and welfare of all employees at work and of other people who might be affected by the job. The second aspect of the research study survey concerned site visits to cotton gins with the support of Australian Centre for Agricultural Health and Safety, Moree, NSW. During these visits the existing ginning process in terms of WH and S were reviewed. Informal interviews were also conducted with Gin Managers and Ginning Experts regarding WH and S in the Australian cotton ginning industry. (author)

  6. Improvement And Development Of The Motivation System In The Occupational And Industrial Safety Field

    Science.gov (United States)

    Pavlov, Arkhip; Gavrilov, Dmitrij

    2017-11-01

    This paper discusses one of the main problems in labour and industrial management in the occupational and industrial safety field - motivation to work safely. The problem is complex and should be solved by a set of measures, where the assignment of responsibility to employees for the results of their work is absent, including in the field of labour protection and industrial safety. In accordance with the obligatory management principles, employees' work resolves to the strict implementation of the actions prescribed by the regulations. The responsibility for the negative result rests with the person who enacted or instructs employees. Thus, the employee is practically exempt from responsibility for the final result. One of the possible solutions to this problem is to put an assignment of responsibility on the employees for the results of their activities also in the occupational and industrial safety field. This is illustrated by the experience of other states, particularly of Australia. In conclusion suggestions for improvement and development of the motivation system in the field of occupational and industrial safety.

  7. Improvement And Development Of The Motivation System In The Occupational And Industrial Safety Field

    Directory of Open Access Journals (Sweden)

    Pavlov Arkhip

    2017-01-01

    Full Text Available This paper discusses one of the main problems in labour and industrial management in the occupational and industrial safety field - motivation to work safely. The problem is complex and should be solved by a set of measures, where the assignment of responsibility to employees for the results of their work is absent, including in the field of labour protection and industrial safety. In accordance with the obligatory management principles, employees' work resolves to the strict implementation of the actions prescribed by the regulations. The responsibility for the negative result rests with the person who enacted or instructs employees. Thus, the employee is practically exempt from responsibility for the final result. One of the possible solutions to this problem is to put an assignment of responsibility on the employees for the results of their activities also in the occupational and industrial safety field. This is illustrated by the experience of other states, particularly of Australia. In conclusion suggestions for improvement and development of the motivation system in the field of occupational and industrial safety.

  8. Safety and health in the petrochemical industry in Map Ta Phut, Thailand.

    Science.gov (United States)

    Langkulsen, Uma; Vichit-Vadakan, Nuntavarn; Taptagaporn, Sasitorn

    2011-01-01

    Petrochemical industries are known as sources of many toxic chemicals. Safety and health risks of the petrochemical workers employed at Map Ta Phut Industrial Estate, located in Rayong, Thailand, are potentially high. The research materials consisted of documents emanating from statutory reports on safety in working with toxic chemicals and the results of interviews by questionnaire among 457 petrochemical workers regarding occupational health and safety issues. Most of workers who were working with toxic chemicals had knowledge and awareness of health risks and chemical hazards at work. We found that safe behavior at work through read the safety information among operational workers less than non-operational workers around 10%. Most of workers had perceived occupational health and safety management in their companies. Some companies revealed that they had not been performing biological monitoring of blood or urine for their health examination reports and that workplace exposure monitoring had not correlated well with health examination of workers. Our study suggested that occupational health and safety for petrochemical industries requires standards and guidelines for workers' health surveillance aimed at protection of workers.

  9. EMPLOYEE PERCEPTIONS OF OCCUPATIONAL HEALTH AND SAFETY STANDARDS IN THE STEEL INDUSTRY

    Directory of Open Access Journals (Sweden)

    J. Mojapelo

    2016-07-01

    Full Text Available The inability to follow occupational health and safety standards typically resultsin accidents that place severe financial burdens on both employees as well asorganisations. The aim of this studyis to explore the perceptionsof employees inthe steel industry towards occupational health and safety standards in the steelindustry in South Africa. A survey was conducted in which a structuredquestionnaire was distributed to a purposive sample of 165 employees employedby a largesteel processing company in Gauteng Province. The collected data wereanalysed using SPSS (Version 22.0. A combination of descriptive statistics andanalysis of mean scores was applied to meet the aim of the study. The resultsreveal that employees in the steel industry perceived that occupational health andsafety standards were satisfactory in all seven occupational health and safetydimensions considered in this study. These are (1 information and training, (2health and safety awareness, (3 employee behaviour (4 role of the supervisor, (5health and safety reporting mechanisms, (6 workplace inspection, and (7workplace environment. Among these dimensions, safety awareness emerged asthe most important dimension to employees. The results may be utilised bymanagers in the steel industry to identify and direct their attention to the keyoccupational health and safety factors in their different contexts.

  10. Industrial Safety and Utopia: Insights from the Fukushima Daiichi Accident.

    Science.gov (United States)

    Travadel, Sébastien; Guarnieri, Franck; Portelli, Aurélien

    2018-01-01

    Feedback from industrial accidents is provided by various state or even international, institutions, and lessons learned can be controversial. However, there has been little research into organizational learning at the international level. This article helps to fill the gap through an in-depth review of official reports of the Fukushima Daiichi accident published shortly after the event. We present a new method to analyze the arguments contained in these voluminous documents. Taking an intertextual perspective, the method focuses on the accident narratives, their rationale, and links between "facts," "causes," and "recommendations." The aim is to evaluate how the findings of the various reports are consistent with (or contradict) "institutionalized knowledge," and identify the social representations that underpin them. We find that although the scientific controversy surrounding the results of the various inquiries reflects different ethical perspectives, they are integrated into the same utopian ideal. The involvement of multiple actors in this controversy raises questions about the public construction of epistemic authority, and we highlight the special status given to the International Atomic Energy Agency in this regard. © 2017 The Authors Risk Analysis published by Wiley Periodicals, Inc. on behalf of Society for Risk Analysis.

  11. Impact of individual resilience and safety climate on safety performance and psychological stress of construction workers: A case study of the Ontario construction industry.

    Science.gov (United States)

    Chen, Yuting; McCabe, Brenda; Hyatt, Douglas

    2017-06-01

    The construction industry has hit a plateau in terms of safety performance. Safety climate is regarded as a leading indicator of safety performance; however, relatively little safety climate research has been done in the Canadian construction industry. Safety climate may be geographically sensitive, thus it is necessary to examine how the construct of safety climate is defined and used to improve safety performance in different regions. On the other hand, more and more attention has been paid to job related stress in the construction industry. Previous research proposed that individual resilience may be associated with a better safety performance and may help employees manage stress. Unfortunately, few empirical research studies have examined this hypothesis. This paper aims to examine the role of safety climate and individual resilience in safety performance and job stress in the Canadian construction industry. The research was based on 837 surveys collected in Ontario between June 2015 and June 2016. Structural equation modeling (SEM) techniques were used to explore the impact of individual resilience and safety climate on physical safety outcomes and on psychological stress among construction workers. The results show that safety climate not only affected construction workers' safety performance but also indirectly affected their psychological stress. In addition, it was found that individual resilience had a direct negative impact on psychological stress but had no impact on physical safety outcomes. These findings highlight the roles of both organizational and individual factors in individual safety performance and in psychological well-being. Construction organizations need to not only monitor employees' safety performance, but also to assess their employees' psychological well-being. Promoting a positive safety climate together with developing training programs focusing on improving employees' psychological health - especially post-trauma psychological

  12. Industrial safety and applied health physics. Annual report for 1978

    International Nuclear Information System (INIS)

    Auxier, J.A.

    1979-09-01

    There were no external or internal exposures to personnel which exceeded the standards for radiation protection as defined in DOE Manual Chapter 0524. Only 39 employees received whole body dose equivalents of one rem or greater. The highest whole body dose equivalent to an employee was 3.3 rem. The highest internal exposure was less than 25% of a maximum permissible dose for any calendar quarter. During 1978, 23 portable instruments were added to the inventory and 228 retired. The total number in service on January 1, 1979, was 1023. There were no releases of gaseous waste or liquid radioactive waste from the laboratory which were of a level that required an incident report to DOE. The average background level at the PAM stations during 1978 was 9.3 μR/hr, or 81 mR/yr. Soil samples were collected at all perimeter and remote monitoring stations and analyzed for eleven radionuclides including plutonium and uranium. Grass samples were collected and analyzed for twelve radionuclides including plutonium and uranium. During 1978, the Radiation and Safety Surveys personnel continued to assist the operating groups in keeping contamination, air concentrations, and personnel exposure levels below the established maximum permissible levels. Fourteen radiation incidents involving radioactive materials were recorded during 1978. Of the 582,000 articles of wearing apparel and 192,000 articles, such as mops, laundry bags, towels, etc., monitored during 1978 about four percent were found to be contaminated. Three lost workday cases occurred at ORNL in 1978, a frequency rate of 0.07. The Serious Injury frequency rate for 1978 was 1.40, as based on the new OSHA system for recording injuries and illness (RII). A total of 55 days were lost or charged for the three lost workday cases in 1978

  13. Radiological safety assessment of gas mantle industries in India

    International Nuclear Information System (INIS)

    Sadagopan, G.; Venkataraman, G.

    1994-01-01

    Thorium, a radioactive element of actinide family was discovered by Berzelius in 1828 and named by him in honor of the Scandinavian God open-quote Thor close-quote. Following its discovery the earliest known use of thorium was in the making of gas mantles. The other use as an X-ray contrast medium open-quote Thorotrast close-quote has since long been discontinued, where as even today its use in gas mantles is continued. Gas lights have been used as a source of light since 1800's. In India, although electric bulbs have replaced most of the gas lights, even today in villages and in urban areas where there is no continuous power supply and in outdoor lightings gas lamps are used. The mantle which is used in these lamps is called the Welsbach mantle and is a netted hose that is impregnated with thorium nitrate and other metals. The function of a gas mantle is to produce a bright light during operation of the lighting device (gas or kerosene lamp) in which the mantle is placed. When placed in a lighting device and heated to 1300-1800 degree Celcius thorium in the mantle incandesces and gives off bright light. In India presently there are about 70 manufacturing units handling 150 metric tons of thorium nitrate annually. There are about four hundred persons involved in manufacturing 200 million mantles per year. Thorium is chosen because of its property of incadescence, however since it is radioactive, radiation safety of the workplace, handling personnel and safe environmental condition for members of public have to be maintained

  14. Safety culture in the Finnish and Swedish nuclear industries - history and present

    Energy Technology Data Exchange (ETDEWEB)

    Reiman, T.; Pietikaeinen, E. (Technical Research Centre of Finland, VTT (Finland)); Kahlbom, U. (RiskPilot AB (Sweden)); Rollenhagen, C. (Royal Institute of Technology (KTH) (Sweden))

    2010-03-15

    The report presents results from an interview study that examined the characteristics of the Nordic nuclear branch safety culture. The study also tested the theoretical model of safety culture developed by the authors. The interview data was collected in Sweden (n = 14) and Finland (n = 16). Interviewees represented the major actors in the nuclear field (regulators, power companies, expert organizations, waste management organizations). The study gave insight into the nature of safety culture in the nuclear industry. It provided an overview on the variety of factors that people in the industry consider important for safety. The respondents rather coherently saw such psychological states as motivation, mindfulness, sense of control, understanding of hazards and safety and sense of responsibility as important for nuclear safety. Some of the respondents described a certain Nordic orientation towards safety. One characteristic was a sense of personal responsibility for safety. However, there was no clear agreement on the existence of a shared Nordic nuclear safety culture. Sweden and Finland were seen different for example in the way the co-operation between plants and nuclear safety authorities was arranged and re-search activities organized. There were also perceived differences in the way everyday activities like decision making were carried out in the organizations. There are multiple explanations for the differences. The industry in Sweden has been driven by the strong supplier. In Finland the regulator's role in shaping the culture has been more active. Other factors creating differences are e.g. national culture and company culture and the type of the power plant. Co-operation between Nordic nuclear power organizations was viewed valuable yet challenging from safety point of view. The report concludes that a good safety culture requires a deep and wide under-standing of nuclear safety including the various accident mechanisms of the power plants as well as

  15. Safety culture in the Finnish and Swedish nuclear industries - history and present

    International Nuclear Information System (INIS)

    Reiman, T.; Pietikaeinen, E.; Kahlbom, U.; Rollenhagen, C.

    2010-03-01

    The report presents results from an interview study that examined the characteristics of the Nordic nuclear branch safety culture. The study also tested the theoretical model of safety culture developed by the authors. The interview data was collected in Sweden (n = 14) and Finland (n = 16). Interviewees represented the major actors in the nuclear field (regulators, power companies, expert organizations, waste management organizations). The study gave insight into the nature of safety culture in the nuclear industry. It provided an overview on the variety of factors that people in the industry consider important for safety. The respondents rather coherently saw such psychological states as motivation, mindfulness, sense of control, understanding of hazards and safety and sense of responsibility as important for nuclear safety. Some of the respondents described a certain Nordic orientation towards safety. One characteristic was a sense of personal responsibility for safety. However, there was no clear agreement on the existence of a shared Nordic nuclear safety culture. Sweden and Finland were seen different for example in the way the co-operation between plants and nuclear safety authorities was arranged and re-search activities organized. There were also perceived differences in the way everyday activities like decision making were carried out in the organizations. There are multiple explanations for the differences. The industry in Sweden has been driven by the strong supplier. In Finland the regulator's role in shaping the culture has been more active. Other factors creating differences are e.g. national culture and company culture and the type of the power plant. Co-operation between Nordic nuclear power organizations was viewed valuable yet challenging from safety point of view. The report concludes that a good safety culture requires a deep and wide under-standing of nuclear safety including the various accident mechanisms of the power plants as well as a

  16. On the state of the radiation safety in the atomic energy and nuclear industry of Russia

    International Nuclear Information System (INIS)

    Panfilov, A.P.

    1994-01-01

    The general aspects of the activity of organs of government in the field of human radiation protection and some other problems of nuclear industry connecting with the new economic and politic situation in Russia have been discussed. There are present information about the organs of government relating to the questions of radiation safety and the major directions of governmental policy in this fields. Some problems of the elimination of the consequences of the accidents in NPPs (Chernobyl, Chelyabinsk), the programs of the radiation safety improvement of population and the information about new normative nuclear safety documents have also been written in this report. (author)

  17. Radiation protection and personnel safety in industrial radiography

    International Nuclear Information System (INIS)

    Banerjee, Alok Kumar

    2015-01-01

    Due to availability of a variety of radioisotopes from BRIT, a considerable number of industrial organizations have come up in India which employ radiation sources in one form or the other. More such organizations may come up in the near future due to the 'Make in India' policy of the Government. All ionizing radiations, whether electromagnetic (gamma- ã ) or corpuscular (particles of alpha-á, or beta-â-), and neutrons (0n1) are harmful to the human body. The damage done by radiations is sinister as human senses are not capable of detecting even lethal doses of radiation. The dose of radiations absorbed by human body which take into account the biological effectiveness of different types of radiations as noted above. The overall outcome of exposure to radiation is initiated by damage to the cells of the organism. The effects of radiation may be deterministic or stochastic, early or late, of somatic or genetic type. The somatic effects (physical) can either be immediate or delayed when the whole body is acutely irradiated with radiation doses. All countries including India have brought their national laws/standards on ionizing radiation in line with the ICRP codes. The conditions for registration, transport, storage, protection and use of radiation sources have been laid down in regulations. The purpose of practical protection against radiation is to prevent any individual receiving a harmful dose. Radiation measurement Instruments like dose meter, pocket dosimeter, NaI(Tl) scintillation detector and recording instruments such as film/TLD badge have been briefly described

  18. State of the art regarding the safety analysis of boron dilution events in Germany

    International Nuclear Information System (INIS)

    Kliem, S.; Rohde, U.

    2006-01-01

    In the German practice of considering boron dilution transients (BDT) in safety analysis reports (SAR), a strongly conservative approach is applied, although it is not explicitly requested in German rules and guidelines for SAR. The approach is based on recommendations of the German Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) and the technical expert organizations (TUV) and accepted by the Reactor Safety Commission (RSK) and is currently followed by the industries and the facilities . No final recommendation and guidelines exist, because the item is subject of comprehensive discussions and research in Germany currently. This conservative approach is based on a combination of analytical and experimental steps. First of all, in a series of thermal hydraulic system code calculations, the bounding scenarios are determined which lead to maximum realistic (under the conditions assumed for nuclear safety verification calculations) volumes of the lower-borated coolant which can be transported to the reactor core by re-establishing circulation in the primary circuit. These are mainly small break loss of coolant accidents (SBLOCA), during which the decay heat is removed from the core by the reflux-condenser regime. The position and maximum size of lower-borated slugs are identified, and the circulation re-start conditions are determined. The main SBLOCA scenarios are verified on experiments at large scale test facilities (e.g. PKL in Germany). While in the integral tests, the formation and transport of the slugs in the loops is assessed, the mixing is investigated in detail in dedicated mixing test facilities (ROCOM) using the boundary conditions either from the integral tests or from the system code calculations. In this way, the minimum boron concentration at the core inlet, which is reached during the transient, is estimated. Additionally, the minimum boron concentration is calculated by using computational fluid dynamics (CFD) codes. The critical boron

  19. Laser cutting: industrial relevance, process optimization, and laser safety

    Science.gov (United States)

    Haferkamp, Heinz; Goede, Martin; von Busse, Alexander; Thuerk, Oliver

    1998-09-01

    the angle between the normal of the cutting front and the laser beam axis. Beneath process optimization and control further work is focused on the characterization of particulate and gaseous laser generated air contaminants and adequate safety precautions like exhaust and filter systems.

  20. The Development of a Risk Management System in the Field of Industrial Safety in the Republic of Kazakhstan

    OpenAIRE

    Sergey S. Kudryavtsev; Pavel V. Yemelin; Natalya K. Yemelina

    2018-01-01

    Background: The purpose of the work is to develop a system that allows processing of information for analysis and industrial risk management, to monitor the level of industrial safety and to perform necessary measures aimed at the prevention of accidents, casualties, and development of professional diseases for effective management of industrial safety at hazardous industrial sites. Methods: Risk assessment of accidents and incidents is based on expert evaluations. Based on the lists of crite...

  1. Investigating ethnic minorities' perceptions of safety climate in the construction industry.

    Science.gov (United States)

    Chan, Albert P C; Wong, Francis K W; Hon, Carol K H; Lyu, Sainan; Javed, Arshad Ali

    2017-12-01

    An increasing number of ethnic minorities (EMs) have been employed in the construction industry to alleviate severe labor shortages in many countries. Unfortunately, statistics show that EMs have higher fatal and non-fatal occupational injury rates than their local counterparts. However, EMs are often underrepresented in safety climate (SC) research as they are difficult to reach and gauge their perception. A positive relationship has been widely found between SC and safety performance. Understanding the safety perceptions of EMs helps to reduce injuries and improve their safety performance. Based on a sample of 320 EMs from 20 companies in the construction industry, exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) were used to identify the SC factors of EMs, and validate the extracted factors, respectively. Multivariate analysis of variance was undertaken to examine mean differences in perceptions of SC by personal characteristics. Three SC factors for EMs encapsulating 16 variables were identified through EFA. The hypothesized CFA model for a three-factor structure derived from EFA showed a satisfactory goodness-of-fit, composite reliability, and construct validity. Three SC factors were identified, namely: (a) safety management commitment, safety resources, and safety communication; (b) employee's involvement and workmate's influence; and (c) perception of safety rules, procedures and risks. The perceptions of SC differed significantly by nationality, marital status, the number of family members supported, and drinking habit. This study reveals the perception of EMs toward SC. The findings highlight the areas for safety improvement and provide leading indicators for safety performance of EMs. The findings are also enlightening for countries with a number of EMs, such as the United Sates, the United Kingdom, Australia, Singapore, and the Middle East. Copyright © 2017. Published by Elsevier Ltd.

  2. Regulation of occupational health and safety in the semiconductor industry: enforcement problems and solutions.

    Science.gov (United States)

    Watterson, Andrew

    2006-01-01

    Reports of high incidences of occupational illnesses in the semiconductor industry should have triggered global investigations and rigorous inspection of the industry. Yet semiconductor plants remain essentially unregulated. Health and safety standards are inadequate and enforcement is lax. Roles for stakeholders in laying down good practice, monitoring, and regulating are proposed, and obstacles are described. Effective regulation has advantages for the industry as well as workers. Conditions for best practice include education at all levels, protection and support for labor inspectors, government commitment to enforcing laws, recognition of the right of workers to organize, and recognition of their rights.

  3. State-of-the-art incore detector system provides operational and safety benefits: Example, Hanford N Reactor

    International Nuclear Information System (INIS)

    Toffer, H.

    1988-08-01

    A presentation on the operational and safety benefits that can be derived from a state-of-the-art incore neutron monitoring system has been prepared for the DOE/ANL training course on ''The Potential Safety Impact of New and Emerging Technologies on the Operation of DOE Nuclear Facilities.'' Advanced incore neutron flux monitoring systems have been installed in some commercial reactors and should be considered for any new reactor designs or as backfits to existing plants. The recent installation of such a system at the Hanford N Reactor is used as an example in this presentation. Unfortunately, N Reactor has been placed in a cold standby condition and the full core incore system has not been tested under power conditions. Nevertheless, the evaluations that preceded the installation of the full core system provide interesting insight into the operational and safety benefits that could be expected

  4. Organisation of work safety in the mining industry; Sicherheitsorganisation im Bergbau

    Energy Technology Data Exchange (ETDEWEB)

    Didier, V. [Bergbau-Berufsgenossenschaft, Bochum (Germany). Referat Unfallverhuetung

    1999-10-07

    The paper summarizes the main findings of a scientific study. Accident figures for the German mining industry indicate that, in comparison with other industries, there is still plenty of scope for increased prevention. However, the rapid development of safety technology alone is still yielding diminishing returns. The main route to increased safety in the mining industry is by way of improved safety management. Various methods are available for analyzing the efficiency of work-safety structures and procedures. Models for the classification of safety-relevant tasks are based on the legally appropriate and organisationally expedient allocation of responsibilities between management and safety experts. An important management tool in this respect is the hazard analysis procedure laid down in the European Union's Health and Safety at Work Act. Practical studies are used to illustrate that safety results can be improved through reorganisation without increasing prime costs. (orig.) [German] Der Beitrag fasst die wesentlichen Ergebnisse einer wissenschaftlichen Studie zusammen: Die Unfallentwicklung im deutschen Bergbau zeigt im Vergleich zu anderen Industriezweigen noch deutliche Reserven fuer die Praevention. Die Fortentwicklung der Sicherheitstechnik fuer sich allein liefert aber nur noch abnehmende Grenzertraege. Eine Strategie technischer und organisatorischer Einzeldirektiven reicht ebenfalls nicht aus. Der Weg zu besseren Sicherheitsresultaten im Bergbau fuehrt vor allem ueber optimierte Ablaeufe des Sicherheitsmanagements. Mit verschiedenen Methoden lassen sich Aufbau- und Ablauforganisation der Arbeitssicherheit auf ihre Effizienz untersuchen. Aus der juristisch implizierten und organisatorisch zweckmaessigen Aufgabenteilung zwischen Fuehrungskraeften und Sicherheitsexperten ergeben sich Zurodnungsmuster fuer sicherheitsrelevante Aufgaben. Ein wichtiges Fuehrungsinstrument sind Gefaehrdungsanalysen nach dem Arbeitsschutzrecht der Europaeischen Union. Anhand

  5. OECD/NEA WGFCS Workshop: Safety Assessment of Fuel Cycle Facilities - Regulatory Approaches and Industry Perspectives

    International Nuclear Information System (INIS)

    2013-01-01

    Nuclear fuel is produced, processed, and stored mainly in industrial-scale facilities. Uranium ores are processed and refined to produce a pure uranium salt stream, Uranium is converted and enriched, nuclear fuel is fabricated (U fuel and U/Pu fuel for the closed cycle option); and spent fuel is stored and reprocessed in some countries (close cycle option). Facilities dedicated to the research and development of new fuel or new processes are also considered as Fuel Cycle Facilities. The safety assessment of nuclear facilities has often been led by the methodology and techniques initially developed for Nuclear Power Plants. As FCFs cover a wide diversity of installations the various approaches of national regulators, and their technical support organizations, for the Safety Assessment of Fuel Cycle Facilities are also diverse, as are the approaches by their industries in providing safety justifications for their facilities. The objective of the Working Group on Fuel Cycle Safety is to advance the understanding for both regulators and operators of relevant aspects of nuclear fuel cycle safety in member countries. A large amount of experience is available in safety assessment of FCFs, which should be shared to develop ideas in this field. To contribute to this task, the Workshop on 'Safety Assessment of Fuel Cycle Facilities - Regulatory Approaches and Industry Perspectives' was held in Toronto, on 27 - 29 September 2011. The workshop was hosted by Canadian Nuclear Safety Commission. The current proceedings provide summary of the results of the workshop with the text of the papers given and presentations made

  6. Toward a sustainable cement industry in 2020 : improvement of the environmental, health & safety performance

    NARCIS (Netherlands)

    2001-01-01

    This background document concentrates on technical and managerial aspects of Environmental, Health & Safety Performance (EHS) control in the cement industry. It gives an overview of options for improvement toward a sustainable cement production in 2020. Energy consumption and use of alternative

  7. Advancement of Tools Supporting Improvement of Work Safety in Selected Industrial Company

    Science.gov (United States)

    Gembalska-Kwiecień, Anna

    2018-03-01

    In the presented article, the advancement of tools to improve the safety of work in the researched industrial company was taken into consideration. Attention was paid to the skillful analysis of the working environment, which includes the available technologies, work organization and human capital. These factors determine the development of the best prevention activities to minimize the number of accidents.

  8. Safety- and risk analysis activities in other areas than the nuclear industry

    International Nuclear Information System (INIS)

    Kozine, I.; Duijm, N.J.; Lauridsen, K.

    2000-12-01

    The report gives an overview of the legislation within the European Union in the field of major industrial hazards and gives examples of decision criteria applied in a number of European countries when judging the acceptability of an activity. Furthermore, the report mentions a few methods used in the analysis of the safety of chemical installations. (au)

  9. Workshop on Indian Chemical Industry: perspectives on safety, cleaner production and environment production

    NARCIS (Netherlands)

    Ham, J.M.

    1996-01-01

    A Workshop on "Indian Chemical Industry: Perspectives on Safety, Cleaner Production and Environmental Protection" was held on 3, 4 and 5 January 1996, in Bombay, India. The main objective of the workshop, which was organised jointly by the Government of India, UNIDO/UNDP and the Indian Chemical

  10. Validation of a pre-existing safety climate scale for the Turkish furniture manufacturing industry.

    Science.gov (United States)

    Akyuz, Kadri Cemil; Yildirim, Ibrahim; Gungor, Celal

    2018-03-22

    Understanding the safety climate level is essential to implement a proactive safety program. The objective of this study is to explore the possibility of having a safety climate scale for the Turkish furniture manufacturing industry since there has not been any scale available. The questionnaire recruited 783 subjects. Confirmatory factor analysis (CFA) tested a pre-existing safety scale's fit to the industry. The CFA indicated that the structures of the model present a non-satisfactory fit with the data (χ 2  = 2033.4, df = 314, p ≤ 0.001; root mean square error of approximation = 0.08, normed fit index = 0.65, Tucker-Lewis index = 0.65, comparative fit index = 0.69, parsimony goodness-of-fit index = 0.68). The results suggest that a new scale should be developed and validated to measure the safety climate level in the Turkish furniture manufacturing industry. Due to the hierarchical structure of organizations, future studies should consider a multilevel approach in their exploratory factor analyses while developing a new scale.

  11. What Happened to Autonomy? Visual art practices in the creative industries Era

    NARCIS (Netherlands)

    A.M. van Dillen (Anna)

    2014-01-01

    markdownabstractThis thesis concerns the autonomy of visual artists in an era of a booming creative economy and simultaneously declining governmental support for the arts and culture. The research is particularly directed toward the concept of autonomy. On the one hand, there is social autonomy,

  12. Accidents in industrial radiography and lessons to be learned. A review of IAEA Safety Report

    International Nuclear Information System (INIS)

    Modupe, M.S.; Oresegun, O.

    1998-01-01

    This IAEA Safety Report Series publication is the result of a review of a large selection of accidents in industrial radiography which Regulatory Authorities, professional associations and scientific journals have reported. The review's objective was to draw lessons from the initiating events of the accidents, contributing factors and the consequences. A small, representative selection of accident descriptions is used to illustrate the primary causes of radiography accidents and a set of recommendations to prevent recurrence of such accidents or to mitigate the consequences of those that do occur is provided. By far the most common primary cause of over-exposure was 'Failure to follow operational procedures' and specifically failure to perform radiation monitoring to locate the position of the source. The information in the Safety Report is intended for use by Regulatory Authorities, operating organizations, workers manufacturers and client organizations having responsibilities for radiation protection and safety in industrial radiography. (author)

  13. A State-of-the-Art Report on Technologies of a Safety Assessment and a Radioactivity Exposure Assessment for the Decommissioning Process of Nuclear Facilities

    International Nuclear Information System (INIS)

    Jeong, Kwan Seong; Kang, Young Ae; Lee, Dong Gyu; Lee, Kune Woo; Jung, Chong Hun

    2007-09-01

    This report is to provide the reference contents of research and development for technologies of radioactivity exposure and safety assessment for development of the decommissioning technology for nuclear facilities. This report consists of as follows: - Analyzing and discussing on state-of-the-art technologies of a radioactivity exposure assessment of a decommissioning for nuclear facilities - Analyzing and discussing on state-of-the-art technologies of a safety assessment of a decommissioning for nuclear facilities

  14. A State-of-the-Art Report on Technologies of a Safety Assessment and a Radioactivity Exposure Assessment for the Decommissioning Process of Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kwan Seong; Kang, Young Ae; Lee, Dong Gyu; Lee, Kune Woo; Jung, Chong Hun

    2007-09-15

    This report is to provide the reference contents of research and development for technologies of radioactivity exposure and safety assessment for development of the decommissioning technology for nuclear facilities. This report consists of as follows: - Analyzing and discussing on state-of-the-art technologies of a radioactivity exposure assessment of a decommissioning for nuclear facilities - Analyzing and discussing on state-of-the-art technologies of a safety assessment of a decommissioning for nuclear facilities.

  15. A Review of Wireless Sensor Technologies and Applications in Agriculture and Food Industry: State of the Art and Current Trends

    Science.gov (United States)

    Ruiz-Garcia, Luis; Lunadei, Loredana; Barreiro, Pilar; Robla, Jose Ignacio

    2009-01-01

    The aim of the present paper is to review the technical and scientific state of the art of wireless sensor technologies and standards for wireless communications in the Agri-Food sector. These technologies are very promising in several fields such as environmental monitoring, precision agriculture, cold chain control or traceability. The paper focuses on WSN (Wireless Sensor Networks) and RFID (Radio Frequency Identification), presenting the different systems available, recent developments and examples of applications, including ZigBee based WSN and passive, semi-passive and active RFID. Future trends of wireless communications in agriculture and food industry are also discussed. PMID:22408551

  16. A Review of Wireless Sensor Technologies and Applications in Agriculture and Food Industry: State of the Art and Current Trends

    Directory of Open Access Journals (Sweden)

    Ignacio Robla

    2009-06-01

    Full Text Available The aim of the present paper is to review the technical and scientific state of the art of wireless sensor technologies and standards for wireless communications in the Agri-Food sector. These technologies are very promising in several fields such as environmental monitoring, precision agriculture, cold chain control or traceability. The paper focuses on WSN (Wireless Sensor Networks and RFID (Radio Frequency Identification, presenting the different systems available, recent developments and examples of applications, including ZigBee based WSN and passive, semi-passive and active RFID. Future trends of wireless communications in agriculture and food industry are also discussed.

  17. A Review of the Poultry Meat Production Industry for Food Safety in Indonesia

    Science.gov (United States)

    Wahyono, N. D.; Utami, M. M. D.

    2018-01-01

    Poultry meat is an indispensable source of animal protein in human growth and development, so it is in great demand by people all over the world. Poultry meat has several advantages, namely the quality of nutrition is good enough, delicious taste, relatively affordable price, easy to get and accepted all levels of society with diverse backgrounds. The era of globalization requires competitive products, such as chicken meat in Indonesia, the current chicken meat industry is not only based on high production capacity and decreased production costs but also chicken products are safe to eat. As a consequence of trade liberalization, the poultry industry faces the threat of competition with cheaper products with better quality. The food safety of chicken meat starts from the farm, processing process until consumed. Food safety is a requirement of food products that must be handled by involving government, industry and consumers.

  18. Identifying the Critical Factors Affecting Safety Program Performance for Construction Projects within Pakistan Construction Industry

    Directory of Open Access Journals (Sweden)

    Zubair Ahmed Memon

    2013-04-01

    Full Text Available Many studies have shown that the construction industry one of the most hazardous industries with its high rates of fatalities and injuries and high financial losses incurred through work related accident. To reduce or overcome the safety issues on construction sites, different safety programs are introduced by construction firms. A questionnaire survey study was conducted to highlight the influence of the Construction Safety Factors on safety program implementation. The input from the questionnaire survey was analyzed by using AIM (Average Index Method and rank correlation test was conducted between different groups of respondents to measure the association between different groups of respondent. The finding of this study highlighted that management support is the critical factor for implementing the safety program on projects. From statistical test, it is concluded that all respondent groups were strongly in the favor of management support factor as CSF (Critical Success Factor. The findings of this study were validated on selected case studies. Results of the case studies will help to know the effect of the factors on implementing safety programs during the execution stage.

  19. Construction Safety And Health Factors At The Industry Level: The Case Of Singapore

    Directory of Open Access Journals (Sweden)

    Charles Y.J. Cheah

    2007-12-01

    Full Text Available The construction industry is one of the most hazardous industries due to the unique nature of its products and the processes involved. Recent occurrences of highly publicized construction site accidents in Singapore have highlighted the immediate needs for the local industry to address safety and attention at the industry level. The objective of this paper is to examine issues and critical factors affecting S&H standards in Singapore. Clearly, collective efforts should be pursued at the industry level as the country moves towards the ultimate safety management strategy of self-regulation. The findings also indicate that the challenge of making worksites safe should not be placed solely on the contractors but should be shared by all parties affecting the value chain of construction, including the developers, the consultants and the government. The factors identified through factor analysis may inform legislators and industry practitioners in terms of the sources of problems and help develop effective strategies for improvement. Some of the experiences mentioned in the paper could also be relevant to other countries facing similar circumstances.

  20. Impact of state-of-the-art instrumentation on safety-related experimental studies proposed in containment studies facility (CSF)

    International Nuclear Information System (INIS)

    Gole, N.V.; Markandeya, S.G.; Subramaniam, K.; Ghosh, A.K.

    2002-01-01

    Full text: Conducting an experimental program for safety related studies for nuclear power plants (NPPs) is an extremely laborious and time-consuming task due to several reasons. Requirement for frequent replacements, testing and recalibration of a large number of instruments is one of them. Off-line analysis leading to identification of errors is another. A particular test may have to be abandoned based on such analysis. Following the rapid advances in instrumentation, a larger number of options are now available, which make experimentation easy. CSF is one of the upcoming facilities wherein deployment of state-of-the art became inevitable. This paper discusses in detail the design intent of instrumentation, the state-of-the-art instrumentation provisions made to fulfill it the overall impact of this on successful experimentation

  1. Links between operating experience feedback of industrial accidents and nuclear safety

    International Nuclear Information System (INIS)

    Eury, S.P.

    2012-01-01

    Since 1992, the bureau for analysis of industrial risks and pollutions (BARPI) collects, analyzes and publishes information on industrial accidents. The ARIA database lists over 40.000 accidents or incidents, most of which occurred in French classified facilities (ICPE). Events occurring in nuclear facilities are rarely reported in ARIA because they are reported in other databases. This paper describes the process of selection, characterization and review of these accidents, as well as the following consultation with industry trade groups. It is essential to publicize widely the lessons learned from analyzing industrial accidents. To this end, a web site (www.aria.developpement-durable.gouv.fr) gives free access to the accidents summaries, detailed sheets, studies, etc. to professionals and the general public. In addition, the accidents descriptions and characteristics serve as inputs to new regulation projects or risk analyses. Finally, the question of the links between operating experience feedback of industrial accidents and nuclear safety is explored: if the rigorous and well-documented methods of experience feedback in the nuclear field certainly set an example for other activities, nuclear safety can also benefit from inputs coming from the vast diversity of accidents arisen into industrial facilities because of common grounds. Among these common grounds we can find: -) the fuel cycle facilities use many chemicals and chemical processes that are also used by chemical industries; -) the problems resulting from the ageing of equipment affect both heavy and nuclear industries; -) the risk of hydrogen explosion; -) the risk of ammonia, ammonia is a gas used by nuclear power plants as an ingredient in the onsite production of mono-chloramine and ammonia is involved in numerous accidents in the industry: at least 900 entries can be found in the ARIA database. The paper is followed by the slides of the presentation

  2. Assessment of safety culture from the INB organization: A case study for nuclear fuel cycle industry

    International Nuclear Information System (INIS)

    Goncalves, J.S.; Barreto, A.C.

    2002-01-01

    The present article describes strategies, methodologies and first results on the Safety Culture Self-assessment Project under way at INB since August 2001. As a Brazilian Government company in charge of the nuclear fuel cycle activities,. the main purposes of the Project is to evaluate the present status of its safety culture and to propose actions to ensure continuous safety improvement at management level of its industrial processes. The proposed safety culture assessment describes INB's various production sites taking into account the different aspects of their activities, such as regional, social and technical issues. The survey was performed in March/2002 very good attendance (about 80%) the employees. The first global survey results are presented in item 4. (author)

  3. Reliability-based approaches for safety margin assessment in the French nuclear industry

    International Nuclear Information System (INIS)

    Ardillon, E.; Barthelet, B.; Meister, E.; Cambefort, P.; Hornet, P.; Le Delliou, P.

    2003-01-01

    The prevention of the fast fracture damage of the mechanical equipment important for the safety of nuclear islands of the French PWR relies on deterministic rules. These rules include flaw acceptance criteria involving safety factors applied to characteristic values (implicit margins) of the physical variables. The sets of safety factors that are currently under application in the industrial analyses with the agreement of the Safety Authority, are distributed across the two main physical parameters and have partly been based on a semi-probabilistic approach. After presenting the generic probabilistic pro-codification approach this paper shows its application to the evaluation of the performances of the existing regulatory flaw acceptance criteria. This application can be carried out in a realistic manner or in a more simplified one. These two approaches are applied to representative mechanical components. Their results are consistent. (author)

  4. Preliminary results from the application of risk matrix method for safety assessment in industrial radiography

    International Nuclear Information System (INIS)

    Lopez G, A.; Cruz, D.; Truppa, W.; Aravena, M.; Tamayo, B.

    2015-09-01

    Although the uses of ionizing radiation in industry are subject to procedures that provide a high level of safety, experience has shown that equipment failure, human errors, or the combination of both that can trigger accidental exposures may occur. Traditionally, the radiation safety checks whether these industrial practices (industrial radiography, industrial irradiators, among others) are sufficiently safe to prevent similar accidental exposures already occurred, so that becomes dependent on the published information and not always answers questions like: What other events can occur, or what other risks are present? Taking into account the results achieved by the Foro Iberoamericano de Organismos Reguladores Radiologicos y Nucleares, its leading position in the use of techniques of risk analysis in radioactive facilities and the need to develop a proactive approach to the prevention of accidents arising from the use of ionizing radiations in the industry, it intends to apply the risk analysis technique known as Risk Matrix to a hypothetical reference entity for the region in which industrial radiography is performed. In this paper the results of the first stage of this study are shown, that is the identification of initiating events (IE) and barriers that help mitigate the consequences of such IE, so that can appreciate the applicability of this method to industrial radiography services, to reduce the risk to acceptable levels. The fundamental advantage associated with the application of this methodology is that can be applied by the professionals working in the service and identifies specific weaknesses that from the point of view of safety there, so they can be prioritized resources depending on risk reduction. (Author)

  5. State of the Art in LP-WAN Solutions for Industrial IoT Services

    OpenAIRE

    Sanchez-Iborra, Ramon; Cano, Maria-Dolores

    2016-01-01

    The emergence of low-cost connected devices is enabling a new wave of sensorization services. These services can be highly leveraged in industrial applications. However, the technologies employed so far for managing this kind of system do not fully cover the strict requirements of industrial networks, especially those regarding energy efficiency. In this article a novel paradigm, called Low-Power Wide Area Networking (LP-WAN), is explored. By means of a cellular-type architecture, LP-WAN–base...

  6. A Glance on the Safety Culture in Industrial Gamma Radiography in the Philippines: Regulatory Body Perspective

    International Nuclear Information System (INIS)

    Borras, A.M.

    2016-01-01

    The current version of the Code of PNRI Regulations (CPR) Part 11 was published in the Official Gazette on 2010. It is just a year ahead of the publication of the IAEA Specific Safety Guide No. 11. In view of these, radiation safety culture in the practice of industrial gamma radiography was not yet fully introduced in the said national regulations in the country. However, it should not be a reflection that the radiation workers in the country specifically in the said field of practice do not exercise positive safety culture. The Nuclear Regulatory Division (NRD)—regulatory arm, although not yet separated from the Philippine Nuclear Research Institute (PNRI0) as mandated by law — the promotional organization, has a well established and systemic regulatory infrastructure. It is attested by several studies and reports, among others. This study aims to assess the status of the existing safety culture in the conduct of industrial gamma radiography in the country through personnel perception survey of the radiation workers, i.e., managers, radiation safety officers, radiographers and radiographer’s assistants, based on the IAEA five characteristics of safety culture stipulated in the IAEA Safety Guide No. GS-G-3.5, “The Management System for Nuclear Installations”. It is assessed by the NRD of the PNRI. Also, the study determines the existence of safety culture as to the perspective of NRD through observations on the conduct of radiographic operations and walk-through of the facility while using the three-level Schein Model, i.e., “artefacts”, “espoused values” and “basic assumptions” and document reviews, among others

  7. A novel approach to enhance food safety: industry-academia-government partnership for applied research.

    Science.gov (United States)

    Osterholm, Michael T; Ostrowsky, Julie; Farrar, Jeff A; Gravani, Robert B; Tauxe, Robert V; Buchanan, Robert L; Hedberg, Craig W

    2009-07-01

    An independent collaborative approach was developed for stimulating research on high-priority food safety issues. The Fresh Express Produce Safety Research Initiative was launched in 2007 with $2 million in unrestricted funds from industry and independent direction and oversight from a scientific advisory panel consisting of nationally recognized food safety experts from academia and government agencies. The program had two main objectives: (i) to fund rigorous, innovative, and multidisciplinary research addressing the safety of lettuce, spinach, and other leafy greens and (ii) to share research findings as widely and quickly as possible to support the development of advanced safeguards within the fresh-cut produce industry. Sixty-five proposals were submitted in response to a publicly announced request for proposals and were competitively evaluated. Nine research projects were funded to examine underlying factors involved in Escherichia coli O157:H7 contamination of lettuce, spinach, and other leafy greens and potential strategies for preventing the spread of foodborne pathogens. Results of the studies, published in the Journal of Food Protection, help to identify promising directions for future research into potential sources and entry points of contamination and specific factors associated with harvesting, processing, transporting, and storing produce that allow contaminants to persist and proliferate. The program provides a model for leveraging the strengths of industry, academia, and government to address high-priority issues quickly and directly through applied research. This model can be productively extended to other pathogens and other leafy and nonleafy produce.

  8. An Examination of Safety Management Systems and Aviation Technologies in the Helicopter Emergency Medical Services Industry

    Science.gov (United States)

    Buckner, Steven A.

    The Helicopter Emergency Medical Service (HEMS) industry has a significant role in the transportation of injured patients, but has experienced more accidents than all other segments of the aviation industry combined. With the objective of addressing this discrepancy, this study assesses the effect of safety management systems implementation and aviation technologies utilization on the reduction of HEMS accident rates. Participating were 147 pilots from Federal Aviation Regulations Part 135 HEMS operators, who completed a survey questionnaire based on the Safety Culture and Safety Management System Survey (SCSMSS). The study assessed the predictor value of SMS implementation and aviation technologies to the frequency of HEMS accident rates with correlation and multiple linear regression. The correlation analysis identified three significant positive relationships. HEMS years of experience had a high significant positive relationship with accident rate (r=.90; paviation technologies from a systems engineering application. Recommendations for practice included the adoption of existing regulatory guidance for a SMS program. A qualitative analysis was also recommended for future study SMS implementation and HEMS accident rate from the pilot's perspective. A quantitative longitudinal study would further explore inferential relationships between the study variables. Current strategies should include the increased utilization of available aviation technology resources as this proactive stance may be beneficial for the establishment of an effective safety culture within the HEMS industry.

  9. Quality and safety in Spain; La calidad y seguridad industrial en Espana

    Energy Technology Data Exchange (ETDEWEB)

    Prieto Barrio, J. M.; Martinez Martin, D. J.

    2015-07-01

    For three decades, and after the entry of Spain into the EU, it has been developed a regulatory, stable but evolving, framework that has allowed to create the conditions and structures to have stringent safety conditions of products and manufacturing facilities, as well as all the activities necessary for their certification and control. This development has been possible, among others, by the work of impulse and coordination of the Ministry of industry, Energy and Tourism, and particularly of the quality and Industrial safety sub directorate. On the other hand it has been developed a quality infrastructure that has, at the State level, with a standardisation (AENOR) entity and an accreditation body (ENAC) with recognized prestige around the world. In this article, in the first part, a list the regulations which apply to products and manufacturing facilities is shown, as well as explain the role played by standards and accreditation system in industrial safety and the factor of competitiveness that this entails for our industrial sector, and, in the second part, the institutional role of the Ministry and, the aforementioned Sub directorate, is described. The aim of the article is to be a descriptive reference of the current regulatory framework as well as the role of the State in this process. (Author)

  10. Health and safety measures available for young labourers in the cottage industries of Karachi.

    Science.gov (United States)

    Baig, Lubna A; Rasheed, Shahida; Zameer, Mehvash; Zameer, Mehwash

    2005-01-01

    To determine the health problems faced by labourers, 18 years and under, working in the cottage industries of Karachi and know the safety measures available and utilized at these places. Cross-sectional study using two-stage cluster sampling. From February 2002 to March 2003, 95 cottage industries from 10 different locations of five districts of Karachi were included. All workers, 18 years and below, present were interviewed. The environmental and safety gadgets present at the industry were inspected by the surveyors and the manager was interviewed for presence of health and safety benefits for the workers. A total of 280 workers were interviewed, 26 (9.3%) children were between 9-12 years, 82 (29.3%) were between 13-15 and 172 (61.4%) were between 16-18 years of age. Health benefit was given to only one 13-year-old worker in silk industry; appropriate gadgets were absent in 93 (97.8%) industries, present only in 2 industries (one silk and one loom). First Aid box was present in only one loom industry. Two hundred and forty workers (85.7%) were unaware of the materials they were using. One hundred and ninety-three (69%) children were working in improper light, 199(71%) workers experienced high level of noise, 232(83%) were working in high temperature and 155(55.3%) were working with improper ventilation. Health problems faced included joint pains (n=64, 22.85%), backache (n=85, 30.35%), vertigo (n=48, 17.14%), numbness of fingers (n=77, 27.5%) and fatigue experienced by 143 (51.07%) children. The children and adolescents employed in cottage industry are suffering from health problems due to lack of knowledge on their part, and improper ergonomics, environmental and safety conditions at the workplace. The cottage industry should be regulated and brought under labour law. The health sector non-governmental organizations should make concerted efforts for the rehabilitation of this workforce by creating awareness and providing opportunities for education and

  11. A state-of-the-art review on nitrous oxide control from waste treatment and industrial sources.

    Science.gov (United States)

    Frutos, Osvaldo D; Quijano, Guillermo; Aizpuru, Aitor; Muñoz, Raúl

    2018-03-20

    This review aims at holistically analyzing the environmental problems associated with nitrous oxide (N 2 O) emissions by evaluating the most important sources of N 2 O and its environmental impacts. Emissions from wastewater treatment processes and the industrial production of nitric and adipic acid represent nowadays the most important anthropogenic point sources of N 2 O. Therefore, state-of-the-art strategies to mitigate the generation and release to the atmosphere of this greenhouse and O 3 -depleting gas in the waste treatment and industrial sectors are also reviewed. An updated review of the end-of-the-pipe technologies for N 2 O abatement, both in the waste treatment and industrial sectors, is herein presented and critically discussed for the first time. Despite the consistent efforts recently conducted in the development of cost-efficient and eco-friendly N 2 O abatement technologies, physical/chemical technologies still constitute the most popular treatments for the control of industrial N 2 O emissions at commercial scale. The recent advances achieved on biological N 2 O abatement based on heterotrophic denitrification have opened new opportunities for the development of eco-friendly alternatives for the treatment of N 2 O emissions. Finally, the main limitations and challenges faced by these novel N 2 O abatement biotechnologies are identified in order to pave the way for market implementation. Copyright © 2018 Elsevier Inc. All rights reserved.

  12. Resolution 12/2004 Guideline for implementation of safety regulations in the practice of industrial radiography

    International Nuclear Information System (INIS)

    2004-01-01

    1. This guide is intended to clarify, in relation to its application in practice Industrial Radiography, the provisions of: a) Joint Resolution CITMA-MINSAP, of December 15, 2002, Regulation: B asic Radiation Safety Standards , hereinafter Regulation NBS; b) Resolution No. 25/98 of CITMA Regulation. A uthorization Practices Associated with the use of ionizing radiation , hereinafter Resolution 25/98; c) Resolution 121/2000 CITMA Regulation: F or the Safe Transport of Radioactive materials , hereinafter Resolution 121/2000; and in d) Joint Resolution CITMA-MINSAP, Regulation: S election, Training and Authorization of personnel performing Employment Practices Associated Radiation Ionizing . 2. For the purposes of applying this Guide considers the practice of Industrial Radiography includes the following techniques: a) Industrial Radiography with use of gamma radiation sources; b) crawler radiography equipment; and c) Industrial Radiography with X-rays

  13. Food Safety Attitude of Culinary Arts Based Students in Public and Private Higher Learning Institutions (IPT)

    Science.gov (United States)

    Patah, Mohd Onn Rashdi Abd; Issa, Zuraini Mat; Nor, Khamis Mohammad

    2009-01-01

    Food safety issue is not new in Malaysia as problems such as unsafe food handling, doubtful food preparation, food poisoning outbreaks in schools and education institutions and spreading of infectious food borne illness has been discussed by the public more often than before. The purpose of this study is to examine the food safety knowledge and…

  14. State of arts and outlook of research reactor safety management promoted by IAEA

    International Nuclear Information System (INIS)

    Hao Xiaofeng

    2005-01-01

    This paper presents the recent activities of IAEA on the research reactor safety, and the trends in the future. According to the present situation of national research reactors, some suggestions are proposed for the cooperation with IAEA on research reactor safety. (author)

  15. State of the Art in LP-WAN Solutions for Industrial IoT Services

    Directory of Open Access Journals (Sweden)

    Ramon Sanchez-Iborra

    2016-05-01

    Full Text Available The emergence of low-cost connected devices is enabling a new wave of sensorization services. These services can be highly leveraged in industrial applications. However, the technologies employed so far for managing this kind of system do not fully cover the strict requirements of industrial networks, especially those regarding energy efficiency. In this article a novel paradigm, called Low-Power Wide Area Networking (LP-WAN, is explored. By means of a cellular-type architecture, LP-WAN–based solutions aim at fulfilling the reliability and efficiency challenges posed by long-term industrial networks. Thus, the most prominent LP-WAN solutions are reviewed, identifying and discussing the pros and cons of each of them. The focus is also on examining the current deployment state of these platforms in Spain. Although LP-WAN systems are at early stages of development, they represent a promising alternative for boosting future industrial IIoT (Industrial Internet of Things networks and services.

  16. State of the Art in LP-WAN Solutions for Industrial IoT Services.

    Science.gov (United States)

    Sanchez-Iborra, Ramon; Cano, Maria-Dolores

    2016-05-17

    The emergence of low-cost connected devices is enabling a new wave of sensorization services. These services can be highly leveraged in industrial applications. However, the technologies employed so far for managing this kind of system do not fully cover the strict requirements of industrial networks, especially those regarding energy efficiency. In this article a novel paradigm, called Low-Power Wide Area Networking (LP-WAN), is explored. By means of a cellular-type architecture, LP-WAN-based solutions aim at fulfilling the reliability and efficiency challenges posed by long-term industrial networks. Thus, the most prominent LP-WAN solutions are reviewed, identifying and discussing the pros and cons of each of them. The focus is also on examining the current deployment state of these platforms in Spain. Although LP-WAN systems are at early stages of development, they represent a promising alternative for boosting future industrial IIoT (Industrial Internet of Things) networks and services.

  17. The Safety Case for Deep Geological Disposal of Radioactive Waste: 2013 State of the Art. Symposium Proceedings, 7-9 October 2013, Paris, France

    International Nuclear Information System (INIS)

    2014-01-01

    In 2007, the Nuclear Energy Agency (NEA), in concert with the International Atomic Energy Agency (IAEA) and the European Commission (EC), organised a Symposium, entitled 'Safety Cases for the Deep Disposal of Radioactive Waste: Where Do We Stand?' (NEA, 2008). Since then, there have been major developments in a number of national geological disposal programmes and significant experience has been obtained in preparing and reviewing cases for the operational and long-term safety of proposed and operating geological repositories. Especially, three national programmes are now, or will shortly be, at the stage of licence application for a deep geological repository for the disposal of spent nuclear fuel or high-level and other long-lived radioactive waste. Thus, the purpose of this Symposium, 'The Safety Case for Deep Geological Disposal of Radioactive Waste: 2013 State of the Art', was to assess the practice, understanding and roles of the safety case, as applied internationally at all stages of repository development, including the interplay of technical, regulatory and societal issues, as they have developed since 2007. In particular, the symposium aims were: - to share experiences on preparing for, developing and documenting a safety case from both the implementer's and reviewer's perspectives; - to share developments in requirements, expectations and experience gained in judging the adequacy of safety cases; - to identify issues that may arise as repository programmes mature; - to understand the importance of a safety case in promoting and gaining societal confidence; - to gain experience from other fields of industry and technology in which concepts similar to the safety case are applied; - to receive indications useful to the future working programme of the NEA and other international organisations. The symposium was organised into main plenary sessions covering: - international activities and experience related to the safety case since 2007, including

  18. Radiation safety practice in Sudan with respect to industrial radioisotope applications

    International Nuclear Information System (INIS)

    Ahmed, W.D.; Hassan, B.A.; Zeada, D.O.M.; Sirelkhatim, D.A.; Salih, S.A.; Hassan, M.S.

    2008-06-01

    The use of radioisotope technology in petrochemical industry in Sudan started in 2003, since then gamma scanning for distillation columns and tracer applications for leak detection was performed 6 times at a refinery 60 Km away from Khartoum, by Sudan Atomic Energy Commission II T group. This paper focuses on safety and radiation protection for this practice, also describes safety requirements, the emergency plan and evaluation of dose worker value which was done on these missions. The assessment of worker's doses performed showed that they are within an acceptable range. Recommendations are made to even bring them lower. The paper also sheds light on some problems raised and suggests remedial actions.(Author)

  19. Industrial-Strength Model-Based Testing - State of the Art and Current Challenges

    Directory of Open Access Journals (Sweden)

    Jan Peleska

    2013-03-01

    Full Text Available As of today, model-based testing (MBT is considered as leading-edge technology in industry. We sketch the different MBT variants that - according to our experience - are currently applied in practice, with special emphasis on the avionic, railway and automotive domains. The key factors for successful industrial-scale application of MBT are described, both from a scientific and a managerial point of view. With respect to the former view, we describe the techniques for automated test case, test data and test procedure generation for concurrent reactive real-time systems which are considered as the most important enablers for MBT in practice. With respect to the latter view, our experience with introducing MBT approaches in testing teams are sketched. Finally, the most challenging open scientific problems whose solutions are bound to improve the acceptance and effectiveness of MBT in industry are discussed.

  20. Investigating the Process of Valuing Investments in Intangibles: A Case Study in Safety and Security in the Multinational Hotel Industry

    OpenAIRE

    Punpugdee, Nuttapon

    2005-01-01

    Safety and security have emerged as a major force driving change in the multinational hotel industry. As a problem area not well-developed in the literature but considered a crucial force influencing hotel firms' value by the multinational hotel community, safety and security provide an excellent opportunity for industry professionals and academic researchers to improve the value creation of multinational hotel firms. A research need is more urgent in the upscale sector of the industry, and t...

  1. Safety Culture: A Requirement for New Business Models — Lessons Learned from Other High Risk Industries

    International Nuclear Information System (INIS)

    Kecklund, L.

    2016-01-01

    Technical development and changes on global markets affects all high risk industries creating opportunities as well as risks related to the achievement of safety and business goals. Changes in legal and regulatory frameworks as well as in market demands create a need for major changes. Several high risk industries are facing a situation where they have to develop new business models. Within the transportation domain, e.g., aviation and railways, there is a growing concern related to how the new business models may affects safety issues. New business models in aviation and railways include extensive use of outsourcing and subcontractors to reduce costs resulting in, e.g., negative changes in working conditions, work hours, employment conditions and high turnover rates. The energy sector also faces pressures to create new business models for transition to renewable energy production to comply with new legal and regulatory requirements and to make best use of new reactor designs. In addition, large scale phase out and decommissioning of nuclear facilities have to be managed by the nuclear industry. Some negative effects of new business models have already arisen within the transportation domain, e.g., the negative effects of extensive outsourcing and subcontractor use. In the railway domain the infrastructure manager is required by European and national regulations to assure that all subcontractors are working according to the requirements in the infrastructure managers SMS (Safety Management System). More than ten levels of subcontracts can be working in a major infrastructure project making the system highly complex and thus difficult to control. In the aviation domain, tightly coupled interacting computer networks supplying airport services, as well as air traffic control, are managed and maintained by several different companies creating numerous interfaces which must be managed by the SMS. There are examples where a business model with several low

  2. State-of-the-art of furnace recuperation in the primary metals industry: technical briefing report

    Energy Technology Data Exchange (ETDEWEB)

    Moore, N.L.

    1983-08-01

    Existing and emerging recuperator technology is identified, as well as the technical and economic issues in applying such technology. An overview of recuperation and its relevance to the primary metals industry is presented. Design considerations, equipment, and energy and cost savings of five recuperator applications in the primary metals industry are examined. Three applications include a case history of a recent recuperator installation. A cost engineering analysis of recuperator technology is included to ensure that technically feasible engineering projects are also economically attractive business ventures. An overview of emerging recuperation technology is presented.

  3. European downstream oil industry safety performance. Statistical summary of reported incidents 2009

    International Nuclear Information System (INIS)

    Burton, A.; Den Haan, K.H.

    2010-10-01

    The sixteenth such report by CONCAWE, this issue includes statistics on workrelated personal injuries for the European downstream oil industry's own employees as well as contractors for the year 2009. Data were received from 33 companies representing more than 97% of the European refining capacity. Trends over the last sixteen years are highlighted and the data are also compared to similar statistics from related industries. In addition, this report presents the results of the first Process Safety Performance Indicator data gathering exercise amongst the CONCAWE membership.

  4. The development of safety criteria for use in the nuclear industry

    International Nuclear Information System (INIS)

    Higson, D.J.

    1978-01-01

    Limits to routine radiation exposure have been laid down in the health regulations of industrial nations and provide a basis for the safe operation of nuclear power stations, uranium mines and other nuclear installations. However, these limits do not take account of the possibility of accidents, which may also be a major concern in the sitting and design of plants. In this paper specific limits to fatal accident frequencies are recommended. An indication of the required level of safety has been derived from the records of other industries and human activities which are already regarded as safe

  5. Radiation applications in industry and medicine: DAE fostering availability, quality and safety of products and service

    International Nuclear Information System (INIS)

    Ramamoorthy, N.

    2016-01-01

    Nuclear and radiation applications play a significant role in aiding industrial process management, food security and safety, health care practices, manufacturing and value-addition to certain materials, treating pollutants/waste, etc. Most of these applications have contributed to improving the quality of life and industrial efficiency. India is among the large-scale producers cum users of radioisotope products and radiation technology applications over the past nearly five decades, thanks to the Department of Atomic Energy (DAE) and its various units pioneering the development and deployment of the above-mentioned applications in our country

  6. The state of the art of innovation-driven business models in the financial services industry

    NARCIS (Netherlands)

    Lüftenegger, E.R.; Angelov, S.A.; Linden, van der E.; Grefen, P.W.P.J.

    2010-01-01

    Emerging innovation-driven business models are changing the financial services landscape. Most companies are using innovation to sustain their business models. However, new entrants into the financial services market innovate in a way that disrupts the industry. Typically, directions for innovation

  7. Spreading the word of the concept 'inherent safety' in a general industrial setting in the Dutch province of Zeeland

    NARCIS (Netherlands)

    Jongen, M.J.M.; Dijkman, A.; Zwanikken, S.; Zwetsloot, G.I.J.M.; Gort, J.

    2007-01-01

    Recent accidents in The Netherlands in different kinds of industries, like fire works storage, catering and energy industry, triggered the Dutch government to start a national program to enhance the enforcement of industrial safety at the regional and municipal level. Stimulated by this program the

  8. A Customized Vision System for Tracking Humans Wearing Reflective Safety Clothing from Industrial Vehicles and Machinery

    Science.gov (United States)

    Mosberger, Rafael; Andreasson, Henrik; Lilienthal, Achim J.

    2014-01-01

    This article presents a novel approach for vision-based detection and tracking of humans wearing high-visibility clothing with retro-reflective markers. Addressing industrial applications where heavy vehicles operate in the vicinity of humans, we deploy a customized stereo camera setup with active illumination that allows for efficient detection of the reflective patterns created by the worker's safety garments. After segmenting reflective objects from the image background, the interest regions are described with local image feature descriptors and classified in order to discriminate safety garments from other reflective objects in the scene. In a final step, the trajectories of the detected humans are estimated in 3D space relative to the camera. We evaluate our tracking system in two industrial real-world work environments on several challenging video sequences. The experimental results indicate accurate tracking performance and good robustness towards partial occlusions, body pose variation, and a wide range of different illumination conditions. PMID:25264956

  9. The costs of uncertainty: regulating health and safety in the Canadian uranium industry

    International Nuclear Information System (INIS)

    Robinson, I.

    1982-04-01

    Federalism, and particularly federal/provincial jurisdictional relationships, have led to considerable uncertainty in the regulation of occupational health and safety and of environmental protection in the Canadian uranium mining industry. The two principal uranium producing provinces in Canada are Saskatchewan and Ontario. Since 1978, in an attempt to avoid constitutional issues, both these provinces and the federal government as well have proceeded unilaterally with health and safety reforms for the industry. In Saskatchewan this has resulted in areas of overlapping jurisdiction, which have led to uncertainty over the legal enforceability of the provincial regulations. In Ontario, the province has left significant gaps in the protection of both workers and the environment. Little progress can be expected in eliminating these gaps and overlaps until the current administrative and jurisdictional arrangements are understood

  10. A discussion of occupational health and safety management for the catering industry in China.

    Science.gov (United States)

    Qiang, Chen; Chow, Wan Ki

    2007-01-01

    The catering industry is developing rapidly in China. Statistics in 2002 indicated that there were over 3.5 million dining places in China, hiring over 18 million people. However, the accident rate was high. Occupational health and safety (OHS) has to be watched more carefully. It is proposed to develop an OHS management system for the catering industry and to integrate it with an ongoing management system by referring to OHSAS 18001:1999. The first step is risk identification and evaluating the major factors concerned by referring to the codes in China, the list of occupational diseases, operation rules, requirements of the law, and records of past incidents. The technological aspect has to be considered in working out the safety strategies. This includes technical measures in accident prevention at the workplace. The kitchen is the main area to be focused on. Methods for hazard identification and risk assessment of dangerous factors in kitchens are proposed in this paper.

  11. The art of appropriate evaluation : a guide for highway safety program managers

    Science.gov (United States)

    2008-08-01

    The guide, updated from its original release in 1999, is intended for project managers who will oversee the evaluation of traffic safety programs. It describes the benefits of evaluation and provides an overview of the steps involved. The guide inclu...

  12. Occupational Health and Safety and Organizational Commitment: Evidence from the Ghanaian Mining Industry.

    Science.gov (United States)

    Amponsah-Tawiah, Kwesi; Mensah, Justice

    2016-09-01

    This study seeks to examine the relationship and impact of occupational health and safety on employees' organizational commitment in Ghana's mining industry. The study explores occupational health and safety and the different dimensions of organizational commitment. A cross-sectional survey design was used for this study. The respondents were selected based on simple random sampling. Out of 400 questionnaires administered, 370 were returned (77.3% male and 22.7% female) and used for the study. Correlation and multiple regression analysis were used to determine the relationship and impact between the variables. The findings of this study revealed positive and significant relationship between occupational health and safety management, and affective, normative, and continuance commitment. Additionally, the results revealed the significant impact of occupational health and safety on affective, normative, and continuance commitment. Management within the mining sector of Ghana must recognize the fact that workers who feel healthy and safe in the performance of their duties, develop emotional attachment and have a sense of obligation to their organization and are most likely committed to the organization. Employees do not just become committed to the organization; rather, they expect management to first think about their health and safety needs by instituting good and sound policy measures. Thus, management should invest in the protection of employees' health and safety in organizations.

  13. Issues of Safety and Security: New Challenging to Malaysia Tourism Industry

    Directory of Open Access Journals (Sweden)

    Mohd Ayob Norizawati

    2014-01-01

    Full Text Available The safety and security issues nowadays become one of the forces causing changes in tourism industry in era of millennium. The main concern of this issues more focus on crime rates, terrorism, food safety, health issues and natural disaster. This topic gained the popularity in tourism research after 9/11 tragedy and since then the academicians and practitioners started seeking the best solution in ways to mitigate these negative impacts. For Malaysia, the image as safety and secure destination was tarnished a few years lately and new unfortunates incident in this year bring more damage to Malaysia image. Healthy issues, terrorism, Lahad Datu intrusion, repeated kidnapping and shooting in Sabah, twin airlines incident, riot and illegal demonstration and false reporting by international media brings new challenging to Malaysia. Although some incident may be had short-term impact to Malaysia tourism industry, but it’s still gave the big impact to Malaysia branding process. Many travellers and Malaysian itself still believe that Malaysia is a one of safer destination and country to visit and stayed in, but more outstanding efforts was require to make sure Malaysia tourism industry was capable to recover from this negative impact as soon as possible.

  14. Implementation of the safety assessment in the practice of industrial radiography

    International Nuclear Information System (INIS)

    Alfonso Pallarés, C.; Pérez Reyes, Y.

    2015-01-01

    The CNSN as regulatory authority has regulatory control processes based on regulations, permits, inspections and limitation to ensure the supervision and control of the practice of industrial radiography. On the other hand in the light of the new regulations approved and being implemented such as: Resolution 334/2011 CITMA 'Regulation on Notification and authorization of practices and activities associated with the use of ionizing radiation sources' and Resolution 17 / 2012, Security Guide: Security Assessment Practices and Activities associated with the use of ionizing radiation (recommendatory), it is necessary for compliance with regulatory requirements concerning the safety assessment. Since 2009 it has been applied this experience in different medical practices and industry, providing a systematic and consistent basis, to the safety assessment of all facilities and activities, which has helped increase the confidence that has been achieved an adequate level of security. The work was able to identify that there is a group of barriers operating in the risk reduction in various accident sequences and therefore have a relative importance in risk reduction, recommendations in this regard to improve the program management of safety in the practice of industrial radiography. [es

  15. LABOUR PROTECTION AND INDUSTRIAL SAFETY IN UKRAINE: PROBLEMS OF TRANSITION PERIOD AND PERSPECTIVE WAYS OF DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    A. P. BOCHKOVSKY

    2016-12-01

    Full Text Available Based on comparative analysis of the industrial accident causes in Ukraine and EU countries this article establishes that the main accident reasons are organizational ones (50 to 70% of the total number of cases, however such indicators as the registered in Ukraine fatal cases frequency coefficient (per 1 thousand of employees and the fatal accidents-total accidents number ratio are greater than the similar indicators in Europe by about 2- and 100-fold, respectively. It is noted that the issues of improving the work safety in Ukraine towards the association with the European Union should be considered in the context of two main planes, which are associated with changes in the legislative and educational systems. Within this article, the authors analyse the main inter-sectoral and sectoral regulatory legal acts on labour protection, in particular in the field of providing for fire, explosion and electrical safety, and relevant documents relating to the creation and maintenance of a comfortable environment at work. Based on the conducted analysis, the problems of adapting the national legislation in the field of labour protection and industrial safety to the legal framework of EU, the problems concerning the unsystematic character and selective approach to the implementation of appropriate changes, and potential hazards that can occur at all stages of the life cycle of technical systems in the event of their introduction are determined. The main differences in the systematic approach to the professional training of students in higher educational institutions (HEI of Ukraine and EU countries (Poland, for example in the field of labour protection and industrial safety are singled out. It is noted that in the Republic of Poland numbering the population correlative with Ukraine the quantity of special educational institutions preparing specialists in the field of labour protection in relation to the total number of higher educational establishment is

  16. X-ray inspection in the aerospace industry - state of the art, challenges, and emerging technologies

    International Nuclear Information System (INIS)

    Mohr, G.A.; Fock, T.

    2004-01-01

    The desire to non-destructively determine the quality and integrity of materials and structures has a long history in the aerospace industry. Through the entire life cycle of aircraft products and components, X-ray inspection technologies play a major role with continuously increasing demand. The requirements for X-ray inspections are continuing to be driven by the need of lower cost methods and solutions with greater reliability, sensitivity, user friendliness and high operation speed as well as applicability of new materials and structures. The presentation will summarize the status of radiographic and radioscopic X-ray inspection technologies in the aerospace industry while showing how X-ray inspection solutions respond to these requirements. Furthermore emerging inspection challenges will be identified and emerging X-ray inspection technologies will be reviewed. (author)

  17. Effluent Treatment Technologies in the Iron and Steel Industry - A State of the Art Review.

    Science.gov (United States)

    Das, Pallabi; Mondal, Gautam C; Singh, Siddharth; Singh, Abhay K; Prasad, Bably; Singh, Krishna K

    2018-05-01

      Iron and steel industry is the principal driving force propelling economic and technological growth of a nation. However, since its inception this industry is associated with widespread environmental pollution and enormous water consumption. Different units of a steel plant discharge effluents loaded with toxic, hazardous pollutants, and unutilized components which necessitates mitigation. In this paper, pollutant removal efficiency, effluent volume product quality, and economic feasibility of existing treatments are studied vis-à-vis their merits, demerits, and innovations to access their shortcomings which can be overcome with new technology to identify future research directions. While conventional methods are inadequate for complete remediation and water reclamation, the potential of advanced treatments, like membrane separation, remains relatively untapped. It is concluded that integrated systems combining membrane separation with chemical treatments can guarantee a high degree of contaminant removal, reusability of effluents concurrently leading to process intensification ensuring ecofriendliness and commercial viability.

  18. Evaluation of the Radiological Safety of 192 Ir Apparatus for Industrial Gamma Radiography

    International Nuclear Information System (INIS)

    Aquino, J. O.; Silva, F. C. A. da; Ramalho, A. T.; Godoy, J. M. O.

    2004-01-01

    The majority of the 192Ir apparatus for industrial gamma radiography have been in usage in Brazil for more than 20 years. They are portable, and almost all operate according to category II. The main objective of this work was to assess the radiological safety of the 11 models of 192Ir apparatus most used in Brazil. The 11 models of 192Ir apparatus were studied with respect to compliance with the main safety requirements of three editions of international Standards ISO 3999. Six models were already manufactured incorporating the safety devices specified in the first edition of ISO 3999, issued in 1977. However, five models were not. The validity of their type B certificates for transport packages was also evaluated. (Author) 8 refs

  19. New radiation protection concept as important safety factor of industrial radiography

    International Nuclear Information System (INIS)

    Pavlovic, R.; Pavlovic, S.

    1998-01-01

    Industrial radiography is a method for non destructive testing of homogeneity of various materials based on different absorption of radiation in different material. X and γ radiation are the most often used. Detrimental effects of radiation are observed since its discovery. In order to prevent harmful effects of radiation without unduly limitations of its use, International Commission on Radiological Protection in collaboration with International Atomic Energy Agency have developed International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources, Safety Series No 115, adopted in 1996. based on ICRP recommendations from 1991. Besides a lot of changes in radiation protection concept and philosophy, decrement of annual dose limits for occupational exposure from 50 to 20 mSv. (author)

  20. Occupational risk perception, safety training, and injury prevention: testing a model in the Italian printing industry.

    Science.gov (United States)

    Leiter, Michael P; Zanaletti, William; Argentero, Piergiorgio

    2009-01-01

    This study examined occupational risk perception in relation to safety training and injuries. In a printing industry, 350 workers from 6 departments completed a survey. Data analysis showed significant differences in risk perceptions among departments. Differences in risk perception reflected the type of work and the injury incidents in the departments. A structural equation analysis confirmed a model of risk perception on the basis of employees' evaluation of the prevalence and lethalness of hazards as well as the control over hazards they gain from training. The number of injuries sustained was positively related to the perception of risk exposure and negatively related to evaluations about the safety training. The results highlight the importance of training interventions in increasing workers' adoption of safety procedures and prevention of injuries.

  1. Safety and security of radioactive sources in industrial radiography in Bangladesh

    Energy Technology Data Exchange (ETDEWEB)

    Mollah, A. S.; Nazrul, M. Abdullah [Industrial Inspection Service Limited, Dhaka (Bangladesh)

    2013-07-01

    Malicious use of radioactive sources can involve dispersal of that material through an explosive device. There has been recognition of the threat posed by the potential malicious misuse of NDT radioactive source by terrorists. The dispersal of radioactive material using conventional explosives, referred to as a 'dirty bomb', could create considerable panic, disruption and area access denial in an urban environment. However, as it is still a relatively new topic among regulators, users, and transport and storage operators worldwide, international assistance and cooperation in developing the necessary regulatory and security infrastructure is required. The most important action in reducing the risk of radiological terrorism is to increase the security of radioactive sources. This paper presents safety and security considerations for the transport and site storage of the industrial radiography sources as per national regulations entitled 'Nuclear Safety and Radiation Control Rules-1997'.The main emphasis was put on the stages of some safety and security actions in order to prevent theft, sabotage or other malicious acts during the transport of the packages. As a conclusion it must be mentioned that both safety and security considerations are very important aspects that must be taking in account for the transport and site storage of radioactive sources used in the practice of industrial radiography. (authors)

  2. EXPLORATORY STUDY OF OBSTACLES IN SAFETY CULTURE DEVELOPMENT IN THE CONSTRUCTION INDUSTRY: A GROUNDED THEORY APPROACH

    Directory of Open Access Journals (Sweden)

    Bonaventure H.W. Hadikusumo

    2010-06-01

    Full Text Available The aim of this paper is to analyse the obstacles that prevent the development of a safety culture in Thailand’s large construction industry from various managerial points of view. Qualitative research methods were used by performing a series of semi-structured interviews of eight case studies selected from six prominent construction firms to investigate the obstacles they face. Glaser’s keyword coding from Grounded Theory was used to reduce the information load after the interviews. Our findings revealed that the factors influencing the successful development of a safety culture in the construction industry are the workers, the characteristics of construction, the subcontractors, the supervisors, and external factors. Based on the frequency analysis, the main obstacles in developing a safety culture result from problems related to the workers themselves. The three most frequently discussed problems are unskilled workers, unsafe worker habits, and high worker turnover. Our results also suggest that managers should encourage engagement from their workers to optimise the successful implementation of safety programs and their long-term improvement.

  3. The U.S. commercial air tour industry: a review of aviation safety concerns.

    Science.gov (United States)

    Ballard, Sarah-Blythe

    2014-02-01

    The U.S. Title 14 Code of Federal Regulations defines commercial air tours as "flight[s] conducted for compensation or hire in an airplane or helicopter where a purpose of the flight is sightseeing." The incidence of air tour crashes in the United States is disproportionately high relative to similar commercial aviation operations, and air tours operating under Part 91 governance crash significantly more than those governed by Part 135. This paper reviews the government and industry response to four specific areas of air tour safety concern: surveillance of flight operations, pilot factors, regulatory standardization, and maintenance quality assurance. It concludes that the government and industry have successfully addressed many of these tenet issues, most notably by: advancing the operations surveillance infrastructure through implementation of en route, ground-based, and technological surveillance methods; developing Aeronautical Decision Making and cue-based training programs for air tour pilots; consolidating federal air tour regulations under Part 136; and developing public-private partnerships for raising maintenance operating standards and improving quality assurance programs. However, opportunities remain to improve air tour safety by: increasing the number and efficiency of flight surveillance programs; addressing pilot fatigue with more restrictive flight hour limitations for air tour pilots; ensuring widespread uptake of maintenance quality assurance programs, especially among high-risk operators not currently affiliated with private air tour safety programs; and eliminating the 25-mile exception allowing Part 91 operators to conduct commercial air tours without the safety oversight required of Part 135 operators.

  4. Safety and security of radioactive sources in industrial radiography in Bangladesh

    International Nuclear Information System (INIS)

    Mollah, A. S.; Nazrul, M. Abdullah

    2013-01-01

    Malicious use of radioactive sources can involve dispersal of that material through an explosive device. There has been recognition of the threat posed by the potential malicious misuse of NDT radioactive source by terrorists. The dispersal of radioactive material using conventional explosives, referred to as a 'dirty bomb', could create considerable panic, disruption and area access denial in an urban environment. However, as it is still a relatively new topic among regulators, users, and transport and storage operators worldwide, international assistance and cooperation in developing the necessary regulatory and security infrastructure is required. The most important action in reducing the risk of radiological terrorism is to increase the security of radioactive sources. This paper presents safety and security considerations for the transport and site storage of the industrial radiography sources as per national regulations entitled 'Nuclear Safety and Radiation Control Rules-1997'.The main emphasis was put on the stages of some safety and security actions in order to prevent theft, sabotage or other malicious acts during the transport of the packages. As a conclusion it must be mentioned that both safety and security considerations are very important aspects that must be taking in account for the transport and site storage of radioactive sources used in the practice of industrial radiography. (authors)

  5. State-of-the-art of applications of neural networks in the nuclear industry

    International Nuclear Information System (INIS)

    Zwingelstein, G.; Masson, M.H.

    1990-01-01

    Artificial neural net models have been extensively studied for many years in various laboratories to try to simulate with computer programs the human brain performances. The first applications were developed in the fields of speech and image recognition. The aims of these studies were mainly to classify rapidly patterns corrupted by noises or partly missing. Neural networks with the development of new net topologies and algorithms and parallel computing hardwares and softwares are to-day very promising for applications in many industries. In the introduction, this paper presents the anticipated benefits of the uses of neural networks for industrial applications. Then a brief overview of the main neural networks is provided. Finally a short review of neural networks applications in the nuclear industry is given. It covers domains such as: predictive maintenance for vibratory surveillance of rotating machinery, signal processing, operator guidance and eddy current inspection. In conclusion recommendations are made to use with efficiency neural networks for practical applications. In particular the need for supercomputing will be pinpointed. (author)

  6. A Guidebook for Evaluating Organizations in the Nuclear Industry - an example of safety culture evaluation

    International Nuclear Information System (INIS)

    Oedewald, Pia; Pietikaeinen, Elina; Reiman, Teemu

    2011-06-01

    Organizations in the nuclear industry need to maintain an overview on their vulnerabilities and strengths with respect to safety. Systematic periodical self assessments are necessary to achieve this overview. This guidebook provides suggestions and examples to assist power companies but also external evaluators and regulators in carrying out organizational evaluations. Organizational evaluation process is divided into five main steps. These are: 1) planning the evaluation framework and the practicalities of the evaluation process, 2) selecting data collection methods and conducting the data acquisition, 3) structuring and analysing the data, 4) interpreting the findings and 5) reporting the evaluation results with possible recommendations. The guidebook emphasises the importance of a solid background framework when dealing with multifaceted phenomena like organisational activities and system safety. The validity and credibility of the evaluation stem largely from the evaluation team's ability to crystallize what they mean by organization and safety when they conduct organisational safety evaluations - and thus, what are the criteria for the evaluation. Another important and often under-considered phase in organizational evaluation is interpretation of the findings. In this guidebook a safety culture evaluation in a Nordic nuclear power plant is presented as an example of organizational evaluation. With the help of the example, challenges of each step in the organizational evaluation process are described. Suggestions for dealing with them are presented. In the case example, the DISC (Design for Integrated Safety culture) model is used as the evaluation framework. The DISC model describes the criteria for a good safety culture and the organizational functions necessary to develop a good safety culture in the organization

  7. The Development of a Risk Management System in the Field of Industrial Safety in the Republic of Kazakhstan

    Directory of Open Access Journals (Sweden)

    Sergey S. Kudryavtsev

    2018-03-01

    Full Text Available Background: The purpose of the work is to develop a system that allows processing of information for analysis and industrial risk management, to monitor the level of industrial safety and to perform necessary measures aimed at the prevention of accidents, casualties, and development of professional diseases for effective management of industrial safety at hazardous industrial sites. Methods: Risk assessment of accidents and incidents is based on expert evaluations. Based on the lists of criteria parameters and their possible values, provided by the experts, a unified information and analytical database is compiled, which is included in the final interrogation questionnaires. Risk assessment of industrial injuries and occupational diseases is based on statistical methods. Results: The result of the research is the creation of Guidelines for risk management on hazardous industrial sites of the Republic of Kazakhstan. The Guidelines determine the directions and methods of complex assessment of the state of industrial safety and labor protection and they could be applied as methodological basis at the development of preventive measures for emergencies, casualties, and incidents at hazardous industrial sites. Conclusion: Implementation of the information-analytical system of risk level assessment allows to analyze the state of risk of a possible accident at industrial sites, make valid management decisions aimed at the prevention of emergencies, and monitor the effectiveness of accident prevention measures. Keywords: industrial safety, industrial trauma, professional sickness rate, risk assessment, risk management

  8. Development of the safety evaluation system in the respects of organizational factors and workers' consciousness. Pt. 5. Application of the system for industries except electric power industry

    International Nuclear Information System (INIS)

    Hasegawa, Naoko; Hirose, Ayako; Hayase, Kenichi; Sasou Kunihide; Takano, Kenichi

    2004-01-01

    The purpose of our study is to develop a safety evaluation system which clarifies the safety level of an organization. As a basic method of evaluation using a questionnaire had been established, now that the generalization is needed for the system. Hence, this paper is intended to verify the applicability of the system for eight manufacture industries. The investigation using a questionnaire was conducted for 125 factories' workers. The following results were obtained: 1) The Comprehensive Safety Index (CSI) taking into account individual and organizational factors was identified using the principal component analysis. 2) Although the criterion-related validity of CSI was confirmed for some industries, ti will be necessary for the advancement of the system's reliability to compile more data into the system. 3) According to the result of investigations on safety management in secure companies and the causes of current industrial accidents, it was clarified that the CSI had the content validity. 4) It seemed possible to evaluate the safety level using two different industries' data if there were similarities between the industries in the score of the CSI and the aspects to which were attached importance for the improvement of the safety. (author)

  9. State-of-The-Art and Applications of 3D Imaging Sensors in Industry, Cultural Heritage, Medicine, and Criminal Investigation.

    Science.gov (United States)

    Sansoni, Giovanna; Trebeschi, Marco; Docchio, Franco

    2009-01-01

    3D imaging sensors for the acquisition of three dimensional (3D) shapes have created, in recent years, a considerable degree of interest for a number of applications. The miniaturization and integration of the optical and electronic components used to build them have played a crucial role in the achievement of compactness, robustness and flexibility of the sensors. Today, several 3D sensors are available on the market, even in combination with other sensors in a "sensor fusion" approach. An importance equal to that of physical miniaturization has the portability of the measurements, via suitable interfaces, into software environments designed for their elaboration, e.g., CAD-CAM systems, virtual renders, and rapid prototyping tools. In this paper, following an overview of the state-of-art of 3D imaging sensors, a number of significant examples of their use are presented, with particular reference to industry, heritage, medicine, and criminal investigation applications.

  10. Post-occupancy evaluation of a restored industrial building: A contemporary art and design gallery in Mexico

    Directory of Open Access Journals (Sweden)

    J. Mundo-Hernández

    2015-12-01

    Full Text Available This paper presents the results obtained from a post-occupancy evaluation (POE study conducted in an old fabric building called “La Violeta”. This structure has been recently converted into a contemporary art gallery. La Violeta is located in Puebla City, Mexico. The building dates from the beginning of the 19th century; it was built and used as a textile factory until the first decades of the 20th century. This POE study aims to assess the new use of the building from the users׳ point of view. Methodology involves historical research of the building, analysis of the conversion strategy, walkthrough investigation, and a user survey. Questions regarding the re-utilization strategy used in the building and its current use are included in the survey, such as “How do people perceive the space regarding its functionality, accessibility, and comfort?” Although the re-utilization process destroyed several historic elements, the re-use of old industrial spaces that otherwise would be obsolete and disused seems pertinent. Developing small renovation projects as part of an integral and wider project seems feasible. Users perceive the building as comfortable but not properly advertised as an art gallery, and its location is difficult to find.

  11. On the state of the art and some trends in industrial utilization of nuclear power

    International Nuclear Information System (INIS)

    Rockstroh, R.

    1980-01-01

    The status achieved in nuclear power utilization in the world and the prospects of further development are presented. Concerning the technological maturity as well as the economy and the environmental aspects the experience hitherto obtained enables the conclusion that nuclear plants have not to fear any comparison with conventional power stations. The social difficulties in the industrially developed capitalist countries in managing the complex problems of utilizing nuclear power are described and commented. Some political aspects of further nuclear power development are also indicated. Information is given about the measures and some objectives for acceleration of nuclear power utilization in the CMEA member states. (author)

  12. SmartRoads: training Indonesian workers to become road safety ambassadors in industrial and community settings.

    Science.gov (United States)

    Montero, Kerry; Spencer, Graham; Ariens, Bernadette

    2012-06-01

    This paper reports on a programme to improve road safety awareness in an industrial community in the vicinity of Jakarta, in Indonesia. Adapting the model of a successful community and school-based programme in Victoria, in Australia, and using a peer education approach, 16 employees of a major manufacturing company were trained to implement road safety education programmes amongst their peers. Specific target groups for the educators were colleagues, schools and the local community. Over 2 days the employees, from areas as diverse as production, public relations, personnel services, administration and management, learned about road safety facts, causes of traffic casualties, prevention approaches and peer education strategies. They explored and developed strategies to use with their respective target groups and practised health education skills. The newly trained workers received certificates to acknowledge them as 'SmartRoads Ambassadors' and, with follow-up support and development, became road safety educators with a commitment and responsibility to deliver education to their respective work and local communities. This paper argues that the model has potential to provide an effective and locally relevant response to road safety issues in similar communities.

  13. Regulatory inspection practices for industrial safety (electrical, mechanical, material handling and conventional aspects)

    International Nuclear Information System (INIS)

    Agarwal, K.

    2017-01-01

    Regulatory Inspection (RI) of BARC facilities and projects are carried out under the guidance of BARC Safety Council (BSC) Secretariat. Basically facilities and projects have been divided into two board categories viz. radiological facilities and non-radiological facilities. The Rls of radiological facilities should be carried out under OPSRC and of non-radiological facilities under CFSRC. Periodicity of inspection shall be at least once in a year. The RI of projects is carried out under concerned DSRC. RI practices with industrial safety which includes electrical, mechanical, material handling and conventional aspect for these facilities starts with check lists. The inspection areas are prepared in the form of checklists which includes availability of approved documents, compliance status of previous RIT and various safety committee's recommendations, radiological status of facilities, prompt reporting of safety related unusual occurrences, major incident, site visit for verification of actual status of system/plant. The practices for inspection in the area of electrical safety shall include checking of maintenance procedure for all critical class IV system equipment's such as HT panel, LT panel, transformer and motors. Load testing of Class III system such as D.G. set etc. shall be carried out as technical specification surveillance schedule. Status of aviation lights, number of qualified staff, availability of qualified staff etc. shall be form of inspection

  14. Food safety issues and training methods for ready-to-eat foods in the grocery industry.

    Science.gov (United States)

    Binkley, Margaret; Ghiselli, Richard

    2005-10-01

    As Americans have become more pressed for time, the use of convenient, simplified meals become a way of life. One aspect of this trend, known as Home Meal Replacement (IIMR), has increased in sales since its inception. Between 1999 and 2001, the average annual expenditure per consumer rose 5.6 pereent, and $958 per person per year was spent in 2002. Along with this growth, food safety risks may have increased. The study reported here examined efforts being undertaken by grocery and convenience stores to control the wholesomeness of INR food items. After a convenience sample of 500 grocery store executives was identified, a 32-item questionnaire was developed and mailed to the executives. The results indicate that the industry has taken food safety seriously with only 10 pereent reporting that they have no food safety training. The executives cited employee turnover as a major concern in food safety today, along with lack of food safety knowledge of the consumer and improper holding temperatures.

  15. [Safety data of the new, reduced-dose influenza vaccine FluArt after its first season on the market].

    Science.gov (United States)

    Vajó, Péter; Gyurján, Orsolya; Szabó, Ágnes Mira; Kalabay, László; Vajó, Zoltán; Torzsa, Péter

    2017-12-01

    The currently licensed seasonal influenza vaccines contain split, subunit or whole virions, typically in amounts of 15 µg hemagglutinin per virus strain for adult and up to 60 µg in elderly patients. The present study reports safety data of the newly licensed, reduced dose vaccine with 6 µg of hemagglutinin per strain produced by Fluart (Hungary) after its first season on the market. The main objective of enhanced safety surveillance was to detect a potential increase in reactogenicity and allergic events that is intrinsic to the product in near real-time in the earliest vaccinated cohorts. The study methods were based on the Interim guidance on enhanced safety surveillance for seasonal influenza vaccines in the EU by the European Medicines Agency. We used the Fisher exact test with 95% confidence intervals. We studied 587 patients and detected a total 24 adverse events, all of which have already been known during the licensing studies of the present vaccine. The frequencies of the adverse events were not different from what had been seen with the previously licensed 15 µg vaccine. Based on the results, the authors conclude that the new, reduced dose vaccine FluArt is safe and tolerable. Orv Hetil. 2017; 158(49): 1953-1959.

  16. State-of-the-art WEB -technologies and ecological safety of nuclear power engineering facilities

    International Nuclear Information System (INIS)

    Batij, V.G.; Batij, E.V.; Rud'ko, V.M.; Kotlyarov, V.T.

    2004-01-01

    Prospects of web-technologies using in the field of improvement radiation safety level of nuclear power engineering facilities is seen. It is shown that application of such technologies will enable entirely using the data of all information systems of radiation control

  17. A study of the state of the art on the determination of the threshold values of the performance indicators for safety systems and initiating events of nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Kang, D. I.; Kim, K. Y.; Hwang, M. J.; Park, J. H.; Ha, J. J

    2004-02-01

    The threshold values of Korean Institute of Nuclear Safety (KINS) Performance Indicators (PIs)' determining the safety class of initiating events and safety systems can not sufficiently reflect the operating experience and PSA results of domestic NPPs. Therefore, the state of arts on the PI study of domestic and foreign countries is analyzed in order to reflect the operating experience and PSA results of domestic NPPs in the determination of the threshold values of the PIs for safety systems and initiating events of domestic NPPs. We identified the state of arts of PIs through reviewing the objectives and types of WANO, IAEA, NRC, OECD/NEA and domestic PIs, and the technical issues of the threshold values of SECY 99-007 and NUREG-1753. We also, identified the current status of recently developed MSPI (Mitigating System Performance Index) and IIIEI (Integrated Industry Initiating Event Indicator). From this study of the state of the arts on the PIs, we expect that if the NRC's MSPI and a PI similar to NRC's IIIEI would be introduced into the KINS, it is not necessary to determine the threshold values of PIs applied to the safety systems and initiating events of entire domestic NPPs. Otherwise the threshold values of PIs applied to the individual NPP should be developed using PSA models of typical reactor types. For the active development and use of the risk informed PIs for the domestic NPPs, we expect that the system and component reliability analysis and initiating events analysis for the domestic NPPs, MSPI, IIIEI, and PSA requirements for the PIs be further studied.

  18. Health and safety aspects of textile workers from Solapur (India textile industries

    Directory of Open Access Journals (Sweden)

    Rahul B Hiremath

    2014-12-01

    Full Text Available Introduction: Textile sector in India plays an important role in the country's economy, providing employment to a significant population in rural and urban areas. Objectives: This paper focuses on health and safety aspects of textile workers in Solapur City (one of the key textile cluster in the state of Maharashtra, India. Methodology: A sample of 180 workers from the identified textile industries of Solapur city were assessed for their general physique, muscle tone, lung condition, and eyesight using different techniques. The study aimed at developing a framework for understanding risks to textile workers resulting from lack of health and safety standards in companies. Results: Findings showed that most of the workers have been affected by respiratory problems, increase in muscle tone, eye problems and musculoskeletal problem. It has been also observed that job security or regular work impacts positively to the worker’s long term body health. However, there is an immediate need to adopt and implement measures in accordance with Indian Factories Act (OHSAS 18001/ILO-OSH 2001 which includes directions and procedures in respect of industrial installations, work environment and occupational health and safety guidelines.

  19. Risk Perception, Knowledge and Safety Attitude and Hearing Protector Use in Petrochemical Industry Workers

    Directory of Open Access Journals (Sweden)

    Mahdi Jahangiri

    2008-06-01

    Full Text Available Background and Aim: Hearing protectors (HP are widely employed as the only measure against noise exposure. However, it is well known that unless do workers wear HP continuously, its efficacy will be very low. The purpose of this study was to determine the influence of risk perception, knowledge and safety attitude on hearing protection use in petrochemical industry's workers.Materials and Methods: In this cross-sectional study a structural questionnaire was administrated to 236 randomly selected workers in Iranian petrochemical industry who had been to 85 dBA noise and some influencing factors including risk perception, knowledge and general attitude to safety on using of HP had been investigated.Results: This study showed that only 20.3% of employees claimed to wear hearing protection all the time when they exposed to noise. There was a significant relationship between use of hearing protector and worker's risk perception (p=0.048 and also their knowledge about hearing protection(p=0.009. Also, the relationship between general attitude of workers to safety and risk perception was statistically significant (p=0.046. Conclusion: The results of the study showed that for promoting the use of hearing protectors, two main strategy should be followed. First, removing the barriers to make hearing protectors compliant, and second enhancing the workers’ risk perception about hearing loss and proper use of ear protectors.

  20. Assessment of reliability of a safety culture questionnaire in the cleanser and washer industries

    Directory of Open Access Journals (Sweden)

    2012-09-01

    Full Text Available Introduction: Occupational injuries and accidents as one of the problems have always been considered important in occupational environments. Domino model that Heinrich was formed to pursue the idea of the cause of the accident is the man. Thus one of the effective way to reduce accidents will be control by the unsafe behaviors among workers by promoting safety culture. .Material and Method: In this descriptive - analytical study, the reliability and exploratory factor analysis was used to evaluate the reliability of the questionnaire. In total 303 questionnaires were analyzed using SPSS 17 software. . Result: The alpha crumbed, coefficient was 0/86. Structural factor of the questionnaire was evaluated using factor analysis. KMO and Bartlett’s sphericity test coefficient were 0/909 and 9785/057, respectively. The varimax rotation showed that all test questions are based on factors. .Conclusion: The results indicated favorable validity of this questionnaire for use in detergents and cleaners industries within the country. Considering the load factor safety culture in detergents and cleaners industries, contained 5 factors including “management commitment”, “education and information exchange,” “supportive environment”, “barriers” and “priority to safety”. The obtained the correlations, the highest positive correlation was belong to the “management commitment” (r=0/952, as the strongest correlation with the safety culture.

  1. Ensuring the Environmental and Industrial Safety in Solid Mineral Deposit Surface Mining

    Science.gov (United States)

    Trubetskoy, Kliment; Rylnikova, Marina; Esina, Ekaterina

    2017-11-01

    The growing environmental pressure of mineral deposit surface mining and severization of industrial safety requirements dictate the necessity of refining the regulatory framework governing safe and efficient development of underground resources. The applicable regulatory documentation governing the procedure of ore open-pit wall and bench stability design for the stage of pit reaching its final boundary was issued several decades ago. Over recent decades, mining and geomechanical conditions have changed significantly in surface mining operations, numerous new software packages and computer developments have appeared, opportunities of experimental methods of source data collection and processing, grounding of the permissible parameters of open pit walls have changed dramatically, and, thus, methods of risk assessment have been perfected [10-13]. IPKON RAS, with the support of the Federal Service for Environmental Supervision, assumed the role of the initiator of the project for the development of Federal norms and regulations of industrial safety "Rules for ensuring the stability of walls and benches of open pits, open-cast mines and spoil banks", which contribute to the improvement of economic efficiency and safety of mineral deposit surface mining and enhancement of the competitiveness of Russian mines at the international level that is very important in the current situation.

  2. Health, safety and environmental unit performance assessment model under uncertainty (case study: steel industry).

    Science.gov (United States)

    Shamaii, Azin; Omidvari, Manouchehr; Lotfi, Farhad Hosseinzadeh

    2017-01-01

    Performance assessment is a critical objective of management systems. As a result of the non-deterministic and qualitative nature of performance indicators, assessments are likely to be influenced by evaluators' personal judgments. Furthermore, in developing countries, performance assessments by the Health, Safety and Environment (HSE) department are based solely on the number of accidents. A questionnaire is used to conduct the study in one of the largest steel production companies in Iran. With respect to health, safety, and environment, the results revealed that control of disease, fire hazards, and air pollution are of paramount importance, with coefficients of 0.057, 0.062, and 0.054, respectively. Furthermore, health and environment indicators were found to be the most common causes of poor performance. Finally, it was shown that HSE management systems can affect the majority of performance safety indicators in the short run, whereas health and environment indicators require longer periods of time. The objective of this study is to present an HSE-MS unit performance assessment model in steel industries. Moreover, we seek to answer the following question: what are the factors that affect HSE unit system in the steel industry? Also, for each factor, the extent of impact on the performance of the HSE management system in the organization is determined.

  3. State of the art on alternative methods to animal testing from an industrial point of view: ready for regulation?

    Science.gov (United States)

    Ashton, Rachel; De Wever, Bart; Fuchs, Horst W; Gaca, Marianna; Hill, Erin; Krul, Cyrille; Poth, Albrecht; Roggen, Erwin L

    2014-01-01

    Despite changing attitudes towards animal testing and current legislation to protect experimental animals, the rate of animal experiments seems to have changed little in recent years. On May 15-16, 2013, the In Vitro Testing Industrial Platform (IVTIP) held an open meeting to discuss the state of the art in alternative methods, how companies have, can, and will need to adapt and what drives and hinders regulatory acceptance and use. Several key messages arose from the meeting. First, industry and regulatory bodies should not wait for complete suites of alternative tests to become available, but should begin working with methods available right now (e.g., mining of existing animal data to direct future studies, implementation of alternative tests wherever scientifically valid rather than continuing to rely on animal tests) in non-animal and animal integrated strategies to reduce the numbers of animals tested. Sharing of information (communication), harmonization and standardization (coordination), commitment and collaboration are all required to improve the quality and speed of validation, acceptance, and implementation of tests. Finally, we consider how alternative methods can be used in research and development before formal implementation in regulations. Here we present the conclusions on what can be done already and suggest some solutions and strategies for the future.

  4. Utah ITS/CVO business plan : using technology to maximize highway safety and improve government and industry productivity

    Science.gov (United States)

    1997-12-31

    This plan was produced to maximize highway safety and increase government and industry productivity through the application of Intelligent Transportation System/Commercial Vehicle Operations (ITS/CVO) technologies to support regulatory and enforcemen...

  5. A pattern of contractor selection for oil and gas industries in a safety approach using ANP-DEMATEL in a Grey environment.

    Science.gov (United States)

    Gharedaghi, Gholamreza; Omidvari, Manouchehr

    2018-01-11

    Contractor selection is one of the major concerns of industry managers such as those in the oil industry. The objective of this study was to determine a contractor selection pattern for oil and gas industries in a safety approach. Assessment of contractors based on specific criteria and ultimately selecting an eligible contractor preserves the organizational resources. Due to the safety risks involved in the oil industry, one of the major criteria of contractor selection considered by managers today is safety. The results indicated that the most important safety criterion of contractor selection was safety records and safety investments. This represented the industry's risks and the impact of safety training and investment on the performance of other sectors and the overall organization. The output of this model could be useful in the safety risk assessment process in the oil industry and other industries.

  6. Perturbative methods for sensitivity calculation in safety problems of nuclear reactors: state-of-the-art

    International Nuclear Information System (INIS)

    Lima, Fernando R.A.; Lira, Carlos A.B.O.; Gandini, Augusto

    1995-01-01

    During the last two decades perturbative methods became an efficient tool to perform sensitivity analysis in nuclear reactor safety problems. In this paper, a comparative study taking into account perturbation formalisms (Diferential and Matricial Mthods and generalized Perturbation Theory - GPT) is considered. Then a few number of applications are described to analyze the sensitivity of some functions relavant to thermal hydraulics designs or safety analysis of nuclear reactor cores and steam generators. The behaviours of the nuclear reactor cores and steam generators are simulated, respectively, by the COBRA-IV-I and GEVAP codes. Results of sensitivity calculations have shown a good agreement when compared to those obtained directly by using the mentioned codes. So, a significative computational time safe can be obtained with perturbative methods performing sensitivity analysis in nuclear power plants. (author). 25 refs., 5 tabs

  7. Learning Lessons from TMI to Fukushima and Other Industrial Accidents: Keys for Assessing Safety Management Practices

    International Nuclear Information System (INIS)

    Dechy, N.; Rousseau, J.-M.; Dien, Y.; Montmayeul, R.; Llory, M.

    2016-01-01

    The main objective of the paper is to discuss and to argue about transfer, from an industrial sector to another industrial sector, of lessons learnt from accidents. It will be achieved through the discussion of some theoretical foundations and through the illustration of examples of application cases in assessment of safety management practices in Nuclear Power Plant (NPP). The nuclear energy production industry has faced three big ones in 30 years (TMI, Chernobyl, Fukushima) involving three different reactor technologies operated in three quite different cultural, organizational and regulatory contexts. Each of those accident has been the origin of questions, but also generator of lessons, some changing the worldview (see Wilpert and Fahlbruch, 1998) of what does cause an accident in addition to the engineering view about the importance of technical failures (human error, safety culture, sociotechnical interactions). Some of their main lessons were implemented such as improvements of human-machine interfaces ergonomics, recast of some emergency operating procedures, severe accident mitigation strategies and crisis management. Some lessons did not really provide deep changes. It is the case for organizational lessons such as, organizational complexity, management of production pressures, regulatory capture, and failure to learn, etc.

  8. Establish Central Kitchen under HACCP Control in Food and Beverage Industry to Ensure Food Safety and Hygiene

    Directory of Open Access Journals (Sweden)

    Cuihua Qi

    2014-04-01

    Full Text Available In recent years, food safety and hygiene have been a social problem. So, it is worth studying in-depth that how to control the safety and hygiene of food and beverage. This paper proposes to establish central kitchens under HACCP control to ensure food safety and hygiene in the food and beverage industry. Considering the practical difficulties in the application of HACCP, this paper introduces the establishment of dishes HACCP system with some examples to give the reference of the food and beverage industry. Central kitchens have many advantages while HACCP is the golden standard to ensure food safety and hygiene, hence, it will ensure food safety and hygiene if both can be combined with in the use of food and beverage industry.

  9. Research on the state-of-the-art of probabilistic safety assessment for non-reactor nuclear facilities (1)

    International Nuclear Information System (INIS)

    Yoshida, Kazuo; Abe, Hitoshi; Yamane, Yuichi; Tashiro, Sinsuke; Muramatsu, Ken

    2007-02-01

    Japan Atomic Energy Agency (JAEA) entrusted with research on the state-of-the-art of probabilistic safety assessment (PSA) for non-reactor nuclear facilities (NRNF) to the Atomic Energy Society of Japan (AESJ). The objectives of this research is to obtain the basic useful information related for establishing the quantitative performance requirement and for risk-informed regulation through qualifying issues needed to be resolved for applying PSA to NRNF. A special committee of 'research on the analysis methods for accident consequence in NFRF' was organized in the AESJ. The research activities of the committee were mainly focused on the analysis method for upper bounding consequences of accidents such as events of criticality, explosion, fire and solvent boiling postulated in NRNF resulting in release of radio active material to the environment. (author)

  10. Research on the state-of-the-art of probabilistic safety assessment for non-reactor nuclear facilities (2)

    International Nuclear Information System (INIS)

    Yoshida, Kazuo; Abe, Hitoshi; Yamane, Yuichi; Tashiro, Sinsuke; Muramatsu, Ken

    2007-03-01

    Japan Atomic Energy Agency (JAEA) entrusted with a research on the state-of-the-art of probabilistic safety assessment (PSA) of non-reactor nuclear facilities (NRNF) such as fuel reprocessing and fuel fabrication facilities to the Atomic Energy Society of Japan (AESJ). The objectives of this research is to obtain the basic useful information related for establishing the quantitative performance requirement and for risk-informed regulation through qualifying issues needed to be resolved for applying PSA to NRNF. A special committee of 'Research on the analysis methods for accident consequence in NFRF' was organized by the AESJ. The research activities of the committee were mainly focused on the analysis method for upper bounding consequences of accidents such as events of criticality, explosion, fire and solvent boiling postulated in NRNF resulting in release of radio active material to the environment. This report summarizes the results of research conducted by the committee in FY 2005. (author)

  11. Microbial alkane production for jet fuel industry: motivation, state of the art and perspectives.

    Science.gov (United States)

    Jiménez-Díaz, Lorena; Caballero, Antonio; Pérez-Hernández, Natalia; Segura, Ana

    2017-01-01

    Bio-jet fuel has attracted a lot of interest in recent years and has become a focus for aircraft and engine manufacturers, oil companies, governments and researchers. Given the global concern about environmental issues and the instability of oil market, bio-jet fuel has been identified as a promising way to reduce the greenhouse gas emissions from the aviation industry, while also promoting energy security. Although a number of bio-jet fuel sources have been approved for manufacture, their commercialization and entry into the market is still a far way away. In this review, we provide an overview of the drivers for intensified research into bio-jet fuel technologies, the type of chemical compounds found in bio-jet fuel preparations and the current state of related pre-commercial technologies. The biosynthesis of hydrocarbons is one of the most promising approaches for bio-jet fuel production, and thus we provide a detailed analysis of recent advances in the microbial biosynthesis of hydrocarbons (with a focus on alkanes). Finally, we explore the latest developments and their implications for the future of research into bio-jet fuel technologies. © 2016 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

  12. Employing the arts for knowledge production and translation: Visualizing new possibilities for women speaking up about safety concerns in maternity.

    Science.gov (United States)

    Mackintosh, Nicola; Sandall, Jane; Collison, Claire; Carter, Wendy; Harris, James

    2018-06-01

    This project used animated film to translate research findings into accessible health information aimed at enabling women to speak up and secure professional help for serious safety concerns during pregnancy and after birth. We tested as proof of concept our use of the arts both as product (knowledge production) and process (enabling involvement). Emergencies during pregnancy and birth, while unusual, can develop rapidly and unexpectedly, with catastrophic consequences. Women's tacit knowledge of changes in their condition is an important resource to aid early detection, but women can worry about the legitimacy of their concerns and struggle to get these taken seriously by staff. Arts-based knowledge translation. A user group of women who had experienced complications in the perinatal period (n = 34) helped us develop and pilot test the animation. Obstetricians and midwives (15), clinical leads (3) and user group representatives (8) helped with the design and testing. The consultation process, script and storyboard enabled active interaction with the evidence, meaningful engagement with stakeholders and new understandings about securing help for perinatal complications. The method enabled us to address gender stereotypes and social norms about speaking up and embed a social script for women within the animation, to help structure their help seeking. While for some women, there was an emotional burden, the majority were glad to have been part of the animation's development and felt it had enabled their voices to be heard. This project has demonstrated the benefits of arts-science collaborations for meaningful co-production and effective translation of research evidence. © 2017 The Authors. Health Expectations published by John Wiley & Sons Ltd.

  13. Electrochemical biosensors for Salmonella: State of the art and challenges in food safety assessment.

    Science.gov (United States)

    Silva, Nádia F D; Magalhães, Júlia M C S; Freire, Cristina; Delerue-Matos, Cristina

    2018-01-15

    According to the recent statistics, Salmonella is still an important public health issue in the whole world. Legislated reference methods, based on counting plate methods, are sensitive enough but are inadequate as an effective emergency response tool, and are far from a rapid device, simple to use out of lab. An overview of the commercially available rapid methods for Salmonella detection is provided along with a critical discussion of their limitations, benefits and potential use in a real context. The distinguished potentialities of electrochemical biosensors for the development of rapid devices are highlighted. The state-of-art and the newest technologic approaches in electrochemical biosensors for Salmonella detection are presented and a critical analysis of the literature is made in an attempt to identify the current challenges towards a complete solution for Salmonella detection in microbial food control based on electrochemical biosensors. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. NMC and A and nuclear criticality safety systems integration: A prospective way for enhancement of the nuclear industry facilities safety

    International Nuclear Information System (INIS)

    Ryazanov, Boris G.; Sviridov, Victor I.; Frolov, Vladimir V.; Shvedov, Maxim O.; Mclaughlin, Thomas P.; Pruvost, Norman L.

    2003-01-01

    A considerable body of data has now been acquired about the principles, parameters and consequences of nuclear (criticality) accidents at facilities of the atomic industry in Russia, the United States, Great Britain and Japan. The total number of such accidents stands at 22. Russian and US specialists have prepared a rather extensive survey and analysis of these accidents. The final and important section of this survey is the lessons implied by the results of analysis of these 22 accidents. Among these lessons is the necessity of unconditional enforcement of control over the movement and transformations of special nuclear materials (SNM), and in particular fissile materials, (those SNMs with criticality accident concerns) during production and processing. Inadequacies in such control have been among the causes of most of the accidents that have occurred. Nuclear materials control and accounting (MC and A) for the purpose of ensuring storage reliability and nonproliferation safeguards is a major task of nuclear facilities in any nation. MC and A systems use the latest techniques and hardware for periodic control of SNM in specifically organized material balance areas. Immediate checking, periodic inventory of SNM, and measurements of the parameters of SNM at key points are the main sources of data for these systems. Data about the presence and sites of location of SNM in material balance areas that are acquired in inventories can be used for objective assessment of the status of nuclear safety. On the other hand, the inventory itself involves performance of operations that are unlike routine process engineering, and require special consideration of nuclear safety. Use of the techniques and hardware of MC and A systems not only for purposes of storage reliability, but also to ensure nuclear safety, will reduce the risk of nuclear accidents. This paper gives a concise overview of nuclear accidents that have occurred due to inadequacies in MC and A, and demonstrates

  15. Aspects of radiation safety in the tin mining and processing industries in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Giles, M S

    1987-04-01

    This study was undertaken at the request of the Malaysian nuclear regulatory authorities with the following objectives: to examine the individual steps in the mining, beneficiation, by-product treatment and smelting of tin-bearing minerals so as to highlight possible radiation safety effects and radiological environmental impacts; to make preliminary measurements on operations which are representative of the various steps in the processing of these minerals so as to determine the type and extent of future radiological survey programs; to examine the need for specific measurement techniques with a view to determining future training requirements. A representative operation of each of the steps in the tin mining and processing industry was visited, measurements were made and samples were collected to assess both the in-plant safety and offsite environmental effects of the operation. The results of measurements of gamma dose-rates, radon daughters-in-air, thoron daughters-in-air and radioactive respirable dusts are presented.

  16. Role of human factor in safety assurance in the nuclear industry

    International Nuclear Information System (INIS)

    Agapov, A.M.; Mikhajlov, M.V.; Novikov, G.A.

    2010-01-01

    The authors discuss the issues of human resource activities in the Rosatom Corporation that aim to achieve and maintain the required levels of safety culture and qualification of personnel involved in the operations of nuclear energy sites. These activities are supported by the appropriate resources, organisational management structure and quality control system, legislation, regulations and methodological support. It is emphasized that systematic and versatile HR-related activities in the nuclear industry represent one of the key areas of production operations that assure safety and reliability of nuclear sites at all stages of their life cycle. Especially important is the assurance of high professional level of nuclear regulators. They believe that it would appear sensible, in addition to the existing system of training, to engage the mechanisms of rotation of personnel from utility organisations to regulatory authorities [ru

  17. A concurrent diagnosis of microbiological food safety output and food safety management system performance: Cases from meat processing industries

    NARCIS (Netherlands)

    Luning, P.A.; Jacxsens, L.; Rovira, J.; Oses Gomez, S.; Uyttendaele, M.; Marcelis, W.J.

    2011-01-01

    Stakeholder requirements force companies to analyse their food safety management system (FSMS) performance to improve food safety. Performance is commonly analysed by checking compliance against preset requirements via audits/inspections, or actual food safety (FS) output is analysed by

  18. New vision of the control organisms in industrial safety and maintenance, based approach to new pressure equipment

    International Nuclear Information System (INIS)

    Bernardez Garcia, A.

    2010-01-01

    Control agencies are companies dedicated to the verification of compliance with the safety of products and facilities as administrative regulation in industrial safety through certification activities, testing, inspection or audit.Changes have been made that will stimulate the increase of companies engaged in this sector.

  19. Influence of material and gear parameters on the safety of gearing in metallurgical industry

    Directory of Open Access Journals (Sweden)

    S. Medvecká - Beňová

    2015-01-01

    Full Text Available This paper deals with the appropriate choice of parameters to obtain the desired level of safety of gears in a gearbox to drive the conveyor in the metallurgical industry under increased load. Steel with surface hardness up to 350 HBW, or heat treated steel with hardness of 500 - 650 HBW are used. As a final heat treatment are used surface hardening, cementation and hardening, nitridation. Good properties of heat-treated steels are at the correct thickness of the heat-treated layer of the tooth. Results are presented for dual-ratio gearbox with spur gears from operation of an integrated steel company.

  20. Health, safety, and environmental auditing in the E and P industry

    International Nuclear Information System (INIS)

    Sexton, K.; Visser, K.

    1991-01-01

    This paper gives an overview of the development of auditing within the field of Health, Safety and Environmental (HSE) management in the E and P industry. Auditing of these aspects of the business is relatively recent, and the adoption of formal audit programmes is increasingly regarded as an essential element of the HSE management program. Auditing provides assurance that internal controls are working effectively, and provides vital information for system improvement. An overview will be given of the transitional phases that the HSE auditing process has been through; the factors that have influenced those developments; and some views on potential future developments

  1. Occupational safety and health management in the construction industry: a review.

    Science.gov (United States)

    Jaafar, Mohd Hafiidz; Arifin, Kadir; Aiyub, Kadaruddin; Razman, Muhammad Rizal; Ishak, Muhammad Izzuddin Syakir; Samsurijan, Mohamad Shaharudin

    2017-09-11

    The construction industry plays a significant role in contributing to the economy and development globally. During the process of construction, various hazards coupled with the unique nature of the industry contribute to high fatality rates. This review refers to previous published studies and related Malaysian legislation documents. Four main elements consisting of human, worksite, management and external elements which cause occupational accidents and illnesses were identified. External and management elements are the underlying causes contributing to occupational safety and health (OSH), while human and worksite elements are more apparent causes of occupational accidents and illnesses. An effective OSH management approach is required to contain all hazards at construction sites. An approach to OSH management constructed by elements of policy, process, personnel and incentive developed in previous work is explored. Changes to the sub-elements according to previous studies and the related Malaysian legislation are also covered in this review.

  2. EFFICIENCY OF FIRE-FIGHTING PROTECTION OBJECTS IN PROVISION OF FIRE SAFETY AT INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    A. V. Zhovna

    2008-01-01

    Full Text Available The paper gives an analysis of economic results pertaining to organization of a system for fire-fighting protection of industrial enterprises in theRepublicofBelarus. Statistical data on operational conditions of technical means of fire-fighting protection, particularly, automatic systems for detection and extinguishing of fires, systems of internal fire-fighting water-supply.  Requirements and provisions  of normative and technical documents are thoroughly studied. Observance of these documents is to ensure the required level of  fire safety. On the basis of the obtained results concerning  economic analysis of efficiency optimization directions are defined for selection of technical means of fire-fighting protection at objects of industrial purpose.

  3. Educational aspects of industrial radiography

    International Nuclear Information System (INIS)

    Krishnamurthy, K.; Wamorkar, R.R.; Singh, G.

    1979-01-01

    The state of art of training and education in non-destructive testing in India, with special reference to industrial radiography is reviewed. Basic requirement of industry and potential of radioisotopes in industrial inspection are also described. Need for an organised training programme in industrial isotope radiography to exploit potentials for benefit of industry concurrent with the safety is stressed. A comprehensive training programme tailored to meet the needs of Indian industry is outlined. Benefits obtained from the course to the industry since the beginning of the training programme are briefly reviewed. (auth.)

  4. Spontaneous abortion in the British semiconductor industry: An HSE investigation. Health and Safety Executive.

    Science.gov (United States)

    Elliott, R C; Jones, J R; McElvenny, D M; Pennington, M J; Northage, C; Clegg, T A; Clarke, S D; Hodgson, J T; Osman, J

    1999-11-01

    The UK Health and Safety Executive (HSE) conducted a study to examine the risk of spontaneous abortion (SAB) in British female semiconductor industry workers, following reports from the USA which suggested an association between risk of SAB and work in fabrication rooms and/or exposure to ethylene glycol ethers. A nested case-control study based on 2,207 women who had worked at eight manufacturing sites during a 5-year retrospective time frame was established; 36 cases were matched with 80 controls. The overall SAB rate in the industry was 10.0%. (65 SABs/651 pregnancies) The crude odds ratio (OR) for fabrication work was 0.65 (95% CI 0.30-1.40). This was essentially unchanged after adjustment for a range of potential confounding factors in the first 3 months of pregnancy and was reduced to 0.58 (95% CI 0.26-1.30) after adjustment for smoking in the previous 12 months. There were no statistically significantly elevated ORs for any work group or any specific chemical or physical exposure in the industry. There is no evidence of an increased risk of SAB in the British semiconductor industry. Am. J. Ind. Med. 36:557-572, 1999. Published 1999 Wiley-Liss, Inc.

  5. NDEA Institute for Advanced Study in Industrial Arts. (Detroit, June 24-August 2, 1968). Final Report. Integration of Fluid Power Instruction into Energy and Propulsion Systems.

    Science.gov (United States)

    Cochran, Leslie H.; Wolansky, William D.

    The institute was designed to provide industrial arts teachers with updating experiences in fluid power education. It had four educational phases: technical instruction, directed field experiences, teaching strategies, and professional development. The latter involved meeting with participants in two other institutes. Twenty-one participants were…

  6. Evolution and current situation of the quality and industrial safety. Concepts, laws and regulations; Evolucion y situacion actual de la calidad y seguridad industrial. Conceptos, leyes y reglamentos

    Energy Technology Data Exchange (ETDEWEB)

    Munoz, A.

    2013-06-01

    The aim of this article is to show the difference between the concepts of quality and industrial safety and how in the legislation of products and industrial installation there is a very close relationship between both concepts. So, that Spanish companies could place in the market not only safe products but also reliable ones that meet the society's demand regarding quality. (Author)

  7. Testing laboratories, its function in ensuring industrial safety; Los laboratorios de ensayo, su funcion en el aseguramiento de la seguridad industrial

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Fernandez, M.

    2015-07-01

    This article discusses and justifies the development of industrial laboratories (testing and calibration) in Spain, since its embryo, its creation and development, to the present day. Likewise, presents its interrelation with other agents, as well as the legislative and technical framework is application along to the years. Within this development of the sector, highlights the period of the conformity assessment, and consequently its relationship with Industrial safety. Finally, describes the organizational situation of the sector both nationally and internationally. (Author)

  8. The safety and efficacy of contact lens wear in the industrial and chemical workplace.

    Science.gov (United States)

    Tyhurst, Keith; McNett, Ryan; Bennett, Edward

    2007-11-01

    The use and safety of contact lenses in the industrial and chemical workplace has often been questioned since the 1960s because of many unconfirmed reports of ocular injury resulting from contact lens wear. Because of these urban legends, contact lens wear has been banned or wearers have been required to wear additional personal protective equipment (PPE) not required of non-contact lens wearers. Literature review via Medline and Google search. Research has shown that contact lenses typically provide protective benefits that decrease the severity of ocular injury and improve worker performance. While contact lens wear contraindications do exist, in most cases, and with proper precautions, contact lens wear is still possible. Industrial and chemical companies need to establish written contact lens use policies based on current studies that have shown the safety of workplace contact lens wear when combined with the same PPE required of non-contact lens wearers. Practitioners need to discuss, with their contact lens patients, the additional responsibilities required to maintain proper lens hygiene and proper PPE in the workplace.

  9. Safety in ready mixed concrete industry: descriptive analysis of injuries and development of preventive measures.

    Science.gov (United States)

    Akboğa, Özge; Baradan, Selim

    2017-02-07

    Ready mixed concrete (RMC) industry, one of the barebones of construction sector, has its distinctive occupational safety and health (OSH) risks. Employees experience risks that emerge during the fabrication of concrete, as well as its delivery to the construction site. Statistics show that usage and demand of RMC have been increasing along with the number of producers and workers. Unfortunately, adequate OSH measures to meet this rapid growth are not in place even in top RMC producing countries, such as Turkey. Moreover, lack of statistical data and academic research in this sector exacerbates this problem. This study aims to fill this gap by conducting data mining in Turkish Social Security Institution archives and performing univariate frequency and cross tabulation analysis on 71 incidents that RMC truck drivers were involved. Also, investigations and interviews were conducted in seven RMC plants in Turkey and Netherlands with OSH point of view. Based on the results of this research, problem areas were determined such as; cleaning truck mixer/pump is a hazardous activity where operators get injured frequently, and struck by falling objects is a major hazard at RMC industry. Finally, Job Safety Analyses were performed on these areas to suggest mitigation methods.

  10. State of the art on the probabilistic safety assessment (P.S.A.); Etat de l'art sur les etudes probabilistes de surete (E.P.S.)

    Energy Technology Data Exchange (ETDEWEB)

    Devictor, N.; Bassi, A.; Saignes, P.; Bertrand, F

    2008-07-01

    The use of Probabilistic Safety Assessment (PSA) is internationally increasing as a means of assessing and improving the safety of nuclear and non-nuclear facilities. To support the development of a competence on Probabilistic Safety Assessment, a set of states of the art regarding these tools and their use has been made between 2001 and 2005, in particular on the following topics: - Definition of the PSA of level 1, 2 and 3; - Use of PSA in support to design and operation of nuclear plants (risk-informed applications); - Applications to Non Reactor Nuclear Facilities. The report compiled in a single document these states of the art in order to ensure a broader use; this work has been done in the frame of the Project 'Reliability and Safety of Nuclear Facility' of the Nuclear Development and Innovation Division of the Nuclear Energy Division. As some of these states of the art have been made in support to exchanges with international partners and were written in English, a section of this document is written in English. This work is now applied concretely in support to the design of 4. Generation nuclear systems as Sodium-cooled Fast Reactors and especially Gas-cooled Fast Reactor, that have been the subject of communications during the conferences ANS (Annual Meeting 2007), PSA'08, ICCAP'08 and in the journal Science and Technology of Nuclear Installations. (authors)

  11. The contribution of the industry sector to the construction of a European area of safety and radiation protection

    International Nuclear Information System (INIS)

    Zaiss, W.; Parker, G.; Glibert, M.

    2010-01-01

    The European Atomic Forum (FORATOM) is a trade association representing the European nuclear industry. Its main purpose is to promote the use of nuclear energy in Europe by representing the interests of this important and multi-faceted industrial sector. The European nuclear industry recognized that with the deregulation of the electricity market, diversity of national regulations could seriously distort competition. Therefore harmonizing regulatory practices is the best way of ensuring that the industry can evolve within a stable legal framework. In order to pool resources, the licensees launched mid 2005 ENISS (European Nuclear Installation Safety Standard Initiative) under the umbrella of FORATOM. The EU institutions have in recent years acknowledged nuclear energy as a key component of Europe's energy mix. Major European survey shows public acceptance of nuclear energy is on the increase. Support for discussion and debate on nuclear energy has been supported over the past few years by the European Union through the establishment of the European Nuclear Safety Regulators Group (ENSREG) and the European Nuclear Energy Forum (ENEF). FORATOM and ENISS have been a keen supporter and participant of the ENEF process. The European Nuclear Industry considers that the existing arrangements for ensuring nuclear safety in the EU under the guidance of international nuclear organisations, conventions and under the control of the national safety authorities have delivered excellent safety records. However, the industry has a role to play in the further harmonization processes and is therefore willing to contribute to the dialogue with all possible stakeholders. (author)

  12. Degradation of fluorescent high-visibility colors used in safety garments for the Australian railway industry.

    Science.gov (United States)

    Vijayan, Arun; Islam, Saniyat; Jones, Michael; Padhye, Rajiv; Arnold, Lyndon

    2016-02-01

    This study investigated the compliance of four fluorescent orange high-visibility garment substrates that are predominantly used in the Australian railway industry. While Special Purpose Orange (SPO), a shade of the Fluorescent orange (Fl-orange) is recommended by most Australian states as the high-visibility background color of a safety garment, there appear to be variations in the background color of clothing used by line-workers and rail contractors. The color of the garment was assessed for compliance with the Australian Standard AS/NZS 1906.2.2010 for high-visibility materials for safety garments. The results were also compared with ANSI Z535.2011 and BS EN ISO 20471.2013 Standards. Photometric and colorimetric assessments of the background color of the garment substrates were performed using a spectrophotometer and were evaluated for compliance with the Standards after washing and exposure to UV. The spectrophotometry measurements showed that Fl-orange background color for all samples except one complied with the AS/NZS 1906.2 Standard for daytime high-visibility garments after 20 washes but failed to comply after exposure to UV. It was also found that the chromaticity coordinates of the corners of the Fl-orange color space, specified in the AS/NZS 1906.4.2010 Standard are much wider and yellower when compared with the ANSI Z535.1.2011 and BS EN ISO 20471.2013 Standards. The sample that failed to comply with the Australian and American Standards however complied with the ISO Standard. Irrespective of the Standard used, the research has shown the degrading effect of washing and light exposure and raises the questions as to how regularly, and under what conditions high-visibility garments need to be replaced. These findings will provide information for safety garment manufacturers about the characteristics and performance of high-visibility safety garments which make them conspicuous during daytime use. This research recommends that colors for railway workers

  13. Review of the nuclear safety exercises carried out in French industrial facilities

    International Nuclear Information System (INIS)

    Kissel, Ph.P.; Renard, C.; Meramedjian, H.N.

    1977-01-01

    For several years the Commissariat a l'Energie Atomique (CEA) has been organizing nuclear safety exercises in most nuclear industrial facilities, especially in fuel element fabrication plants, many of which are classified as basic nuclear facilities. The subject and extent of each exercise are decided by mutual agreement between the management of the facility and the CEA officials in charge of Assistance in Protection and Nuclear Safety (APSN). The authors deal with such subjects as criticality accidents (evacuation of facilities, regrouping of personnel, rescue operations etc.) and fire involving large quantities of radioactive material (protection of the environment by spraying water on fumes laden with radioactive aerosols etc.). During these exercises use is made of the resources available with the safety services of the facility, one or more mobile nuclear action teams of the CEA and the appropriate resources within the competence of public authorities, e.g. Civil Defence, the fire brigades, the Gendarmerie etc. Each exercise is followed by a meeting which gives an opportunity for constructive criticism and for the adoption of measures best suited for solving problems which invariably arise, such as choice of methods and resources, co-ordination of their simultaneous or gradual application and so on. (author)

  14. Evolving framework of the LNG industry: Expected growth and continuing importance of safety

    International Nuclear Information System (INIS)

    Kagiyama, Ichiro

    1992-01-01

    A major increase in LNG trade, expected from the 1990s onwards, is quite significant in that a new framework will be developed. These changes and developments may well prove to be some of the most notable that have ever occurred in the 30-year history of the LNG industry. All over the world, new buyers and sellers are entering the scene, while in Japan, small and medium-size businesses are switching to LNG. Transporters and LNG carriers are also expecting an increase in their numbers. We are about to see a wide-ranging diversification in terms of the geography and the size of the companies that deal with LNG. Safety continues to be the main issue in promoting the development of the LNG market. The wider the spread of LNG, the greater the need will be for further development of the systems and organizations for transferring safety technology and skills. In addition to enhancing safety, it will be necessary to seek harmony with the social environment. This paper discusses measures for the future based on the author's many years of experience, particularly in the field of receiving terminals

  15. Pooling knowledge and improving safety for contracted works at a large industrial park.

    Science.gov (United States)

    Agnello, Patrizia; Ansaldi, Silvia; Bragatto, Paolo

    2015-01-01

    At a large chemical park maintenance is contracted by the major companies operating the plants to many small firms. The cultural and psychological isolation of contractor workers was recognized a root cause of severe accidents in the recent years. That problem is common in chemical industry. The knowledge sharing has been assumed a good key to involve contractors and sub contractors in safety culture and contributing to injuries prevention. The selection of personal protective equipment PPE for the maintenance works has been taken as benchmark to demonstrate the adequateness of the proposed approach. To support plant operators, contractors and subcontractors in PPE discussion, a method has been developed. Its core is a knowledge-base, organized in an Ontology, as suitable for inferring decisions. By means of this tool all stakeholders have merged experience and information and find out the right PPE, to be provided, with adequate training and information package. PPE selection requires sound competencies about process and environmental hazards, including major accident, preventive and protective measures, maintenance activities. These pieces of knowledge previously fragmented among plant operators and contractors, have to be pooled, and used to find out the adequate PPE for a number of maintenance works. The PPE selection is per se important, but it is also a good chance to break the contractors' isolation and involve them in safety objectives. Thus by pooling experience and practical knowledge, the common understanding of safety issues has been strengthened.

  16. State-of-The-Art and Applications of 3D Imaging Sensors in Industry, Cultural Heritage, Medicine, and Criminal Investigation

    Directory of Open Access Journals (Sweden)

    Giovanna Sansoni

    2009-01-01

    Full Text Available 3D imaging sensors for the acquisition of three dimensional (3D shapes have created, in recent years, a considerable degree of interest for a number of applications. The miniaturization and integration of the optical and electronic components used to build them have played a crucial role in the achievement of compactness, robustness and flexibility of the sensors. Today, several 3D sensors are available on the market, even in combination with other sensors in a “sensor fusion” approach. An importance equal to that of physical miniaturization has the portability of the measurements, via suitable interfaces, into software environments designed for their elaboration, e.g., CAD-CAM systems, virtual renders, and rapid prototyping tools. In this paper, following an overview of the state-of-art of 3D imaging sensors, a number of significant examples of their use are presented, with particular reference to industry, heritage, medicine, and criminal investigation applications.

  17. IMPLEMENTATION OF A SAFETY PROGRAM FOR THE WORK ACCIDENTS’ CONTROL. A CASE STUDY IN THE CHEMICAL INDUSTRY

    Directory of Open Access Journals (Sweden)

    Edison Cesar de Faria Nogueira

    2015-03-01

    Full Text Available This article presents a case study related to the implementation of a Work Safety Program in a chemical industry, based on the Process Safety Program, PSP, of a huge energy company. The research was applied, exploratory, qualitative and with and data collection method through documentary and bibliographical research. There will be presented the main practices adopted in order to make the Safety Program a reality inside a chemical industry, its results and contributions for its better development. This paper proposes the implementation of a Safety Program must be preceded by a diagnosis of occupational safety and health management system and with constant critical analysis in order to make the necessary adjustments.

  18. Nuclear safety. Summary of the intermediate report of the special joint parliamentary committee on nuclear safety, present and future outlook of the nuclear industry

    International Nuclear Information System (INIS)

    Birraux, Claude; Bataille, Christian; Sido, Bruno

    2011-09-01

    Following the Fukushima events, the Parliamentary Office for Scientific and Technological Assessment (OPECST) was officially asked at the end of March 2011 - jointly by the National Assembly Bureau and by the Senate Committee on the economy, sustainable development, territorial and regional planning - to carry out a study on nuclear safety, and the present and future outlook of the nuclear industry. To carry out this study, seven members of the National Assembly economic affairs and sustainable development committees were also involved, as well as eight members of the Senate Committee on the economy, sustainable development, territorial and regional planning. The first part of this study, devoted to nuclear safety, was completed on 30 June 2011 by the publication of an intermediate report. This report assembles and summarises the information collected during six public hearings and seven trips to nuclear sites. France is one of the nuclear countries where the management of safety is both the most demanding and the most transparent. In this respect, the independence of the Safety Authority is the best guarantee of strictness in the safety field and the existence of pluralistic bodies, such as the Local Information Committees, is the best guarantee of the transparency of safety. But no country can pride itself on being totally safe from a natural disaster of an unexpected scale. The French nuclear industry must therefore ratchet up one more notch its investment in safety and strengthen the means of university research. It must imagine events of even greater intensity, cascading accidents, with interactions between neighbouring industrial sites. Investment must be made by placing safety requirements above any economic consideration and in strict compliance with the specifications of public authorities supervising safety. (authors)

  19. State of the art of computer codes and experimental investigations on safety of nuclear power plants with reactors of WWER type

    International Nuclear Information System (INIS)

    Asmolov, V.G.; Volkov, G.A.; Elikin, I.V.; Mysenkov, A.I.

    1987-01-01

    As is well-known investigations on mathematical models of accidental situations from the point of view of nuclear safety as well as their experimental investigation are of great importance in the design of reactor units for nuclear power plants. This paper gives a review of the state of the art of thermodynamic models and computer codes used for safety analysis of WWER reactors in the USSR, the experimental basis and experimental investigations of the appropriate thermal processes. The actual and future trends of theoretical and experimental investigation on safety problems of WWER type nuclear power plants are briefly described. (author)

  20. Installation services in the lignite industry. Implementing health and safety; Montageeinsaetze in der Braunkohlenindustrie. Handlungsfeld fuer den Arbeitsschutz

    Energy Technology Data Exchange (ETDEWEB)

    Roskopf, Norbert [Roskopf Vulkanisation GmbH, Aachen (Germany)

    2011-07-01

    The increasing number of assignments of contractors in the lignite industry challenges both the client and the contractor with respect to health and safety. Additional endeavours have to be made concerning information, communication, coordination and assurance. Quantitative differences of occupational safety can be made up by operator support. The contractor himself is required to highly focus on health and safety issues. The European Agency for Safety and Health at Work (EU OSHA) and its campaign 'Healthy Workplaces - Safe Maintenance' currently raises the awareness of all parties being involved. More information can be found under http://hw.osha.europa.eu. (orig.)

  1. Days on safety of industrial radiographic controls; Securite des controles radiographiques industriels

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This program is divided in three parts: the context and the regulations, the preparation and the implementation, the tools of prevention and the initiatives and the perspectives.In the first part devoted to the context and regulation are: the context by the Authority of nuclear safety (A.S.N.), the regulation referential, the transport of gamma-graphs; in the second part are the distribution of liabilities, materials and associated requirements, the feedback of incidents and exploitation of it, training and base requirements, works of S.F.R.P./C.O.F.R.E.N.D. and the A.S.N. position; the third part includes help to evaluation of risks at working places of industry radiologists, dosimetry study of a working place, guide to evaluate oneself; the fourth part devoted to the initiatives and the perspectives are: regional experiences charters of good practices in industry radiography, integration of works and deployment by the members of the C.O.F.R.E.N.D., perspectives in matter of prevention of occupational risks in the area of industry radiography. (N.C.)

  2. ECOLOGY SAFETY TECHNOLOGIES OF UNCONVENTIONAL OIL RESERVES RECOVERY FOR SUSTAINABLE OIL AND GAS INDUSTRY DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Viacheslav Zyrin

    2016-09-01

    Full Text Available The problem of effective technology for heavy oil recovery nowadays has a great importance, because of worsening geological conditions of the developed deposits, decreasing recovery factor, increasing the part of heavy oil. For the future sustainable development of oil producing industry the involved technologies must require energy effectiveness and ecological safety. The paper proves the enhanced oil recovery methods necessity for heavy oil deposits, highlighted thermal technologies as the most effective. But traditional thermal treatment technologies is a source of air pollutant emission, such as CO, NO etc. The calculation of emissions for traditional steam generator is provided. Besides, the paper shows the effectiveness of electrical enhanced oil recovery methods. The advantages of associated gas as a fuel for cogeneration plants is shown. The main approaches to implementation of carbon dioxide sequestration technologies in the oil and gas industry of Russia are defined. Conceptual view of СО2-EOR technologies potential within the context of sustainable development of oil and gas industry are presented. On the basis of the conducted research a number of scientific research and practical areas of the CCS technology development are revealed.

  3. Determinants of safety outcomes and performance: A systematic literature review of research in four high-risk industries.

    Science.gov (United States)

    Cornelissen, Pieter A; Van Hoof, Joris J; De Jong, Menno D T

    2017-09-01

    In spite of increasing governmental and organizational efforts, organizations still struggle to improve the safety of their employees as evidenced by the yearly 2.3 million work-related deaths worldwide. Occupational safety research is scattered and inaccessible, especially for practitioners. Through systematically reviewing the safety literature, this study aims to provide a comprehensive overview of behavioral and circumstantial factors that endanger or support employee safety. A broad search on occupational safety literature using four online bibliographical databases yielded 27.527 articles. Through a systematic reviewing process 176 online articles were identified that met the inclusion criteria (e.g., original peer-reviewed research; conducted in selected high-risk industries; published between 1980-2016). Variables and the nature of their interrelationships (i.e., positive, negative, or nonsignificant) were extracted, and then grouped and classified through a process of bottom-up coding. The results indicate that safety outcomes and performance prevail as dependent research areas, dependent on variables related to management & colleagues, work(place) characteristics & circumstances, employee demographics, climate & culture, and external factors. Consensus was found for five variables related to safety outcomes and seven variables related to performance, while there is debate about 31 other relationships. Last, 21 variables related to safety outcomes and performance appear understudied. The majority of safety research has focused on addressing negative safety outcomes and performance through variables related to others within the organization, the work(place) itself, employee demographics, and-to a lesser extent-climate & culture and external factors. This systematic literature review provides both scientists and safety practitioners an overview of the (under)studied behavioral and circumstantial factors related to occupational safety behavior. Scientists

  4. Evaluation of radiological safety conditions of panoramic portable irradiators of industrial radiography used in Brazil

    International Nuclear Information System (INIS)

    Aquino, Josilto Oliveira de

    2003-08-01

    In Brazil, the applications of ionizing radiation in industrial area are performed in about 900 installations, in which around 3000 radioactive sources are handled. Industrial radiography represents 14 % of this total, with 217 X rays equipment and 287 gamma radiography apparatus, according to a survey conducted in the present work. From these gamma apparatus, 90 % employ 192 Ir sources, followed by 60 Co and 75 Se, with 5 % each. The great majority of the 192 Ir apparatus have been in continuous usage in Brazil for more than 20 years, which means that they are old equipment. The totality of the 11 models of 192 Ir apparatus used in Brazil is imported from abroad. Those apparatus are portable, and almost all operate according to category II, i.e., the source assembly is mechanically projected out of the container. This last characteristic, besides the fact that the apparatus are already old-fashioned and worn-out, raises concerns about their radiological safety. The main objective of this work was to develop a specific methodology for inspection, testing and assessment of the radiological safety devices and state of maintenance of the 192 Ir apparatus. The idea is to prevent accidents, as physical failures can lead to overexposure of working staffs. In order to accomplish this, almost a hundred 192 Ir apparatus, from the 11 models used in Brazil, were studied. According to our results, almost 20 % of the 97 apparatus evaluated presented some kind of unsafe condition for proper operation, like poor state of maintenance and faults at the lock that retains the source at the secure position. From the 11 imported models of 192 Ir apparatus in use in Brazil, six models were already manufactured incorporating the safety devices specified by the first edition of the Standard ISO 3999, edited in 1977. However, five models do not comply even with this first edition of the Standard ISO 3999. Thus, they lack some important and basic safety devices. None of the 11 models comply

  5. Voluntary Safety Management System in the Manufacturing Industry – To What Extent does OHSAS 18001 Certification Help?

    Directory of Open Access Journals (Sweden)

    Paas Õnnela

    2015-11-01

    Full Text Available Occupational risk prevention can be managed in several ways. Voluntary safety management standard OHSAS 18001 is a tool, which is considered to give contribution in effective risk management in the manufacturing industry. The current paper examines the benefits of OHSAS 18001 based on the statistical analysis. MISHA method is used for safety audit in 16 Estonian enterprises. The results demonstrate the objectives why companies implement or are willing to implement OHSAS 18001, bring out differences in safety activities for 3 types of companies and determine correlations among different safety activity areas. The information is valuable for enterprises that are willing to improve their safety activities via a voluntary safety management system.

  6. Managing nuclear safety research facilities and capabilities in a changing nuclear industry: the contribution of the OECD/NEA

    International Nuclear Information System (INIS)

    Royen, J.

    2000-01-01

    Although the safety level of nuclear power plants in OECD countries is very satisfactory and the technologies basic to the resolution of safety issues have advanced considerably, continued nuclear safety research work is necessary to address many of the residual concerns, and it remains an important element in ensuring the safe operation of nuclear power plants. However, the funding levels of national Government safety research programmes have been reduced over recent years. There is concern about the ability of OECD Member countries to sustain an adequate level of nuclear safety research capability. The OECD/NEA has a key role to play in organizing reflection and exchange of information on the most efficient use of available technical resources, and in the international management of nuclear safety research facilities and capabilities in a changing nuclear industry. Possible initiatives are mentioned in the paper. (author)

  7. ESTIMATION OF INDUSTRIAL WASTE SAFETY BY THE “CHEMICAL OXYGEN DEMAND” INDEX

    Directory of Open Access Journals (Sweden)

    A. S. Kayshev

    2015-01-01

    Full Text Available One of the indices of industrial waste safety including distillers grains is chemical oxygen demand (COD, and its value (53591÷64184 mg O/dm3 shows that it can be considered as unsustainable waste. This high value of COD is conditioned by the absence of toxins in distillers grains, and by concentration of biologically active substances after which isolation the distillers grains index lowers by 74%. This allows considering the distillers grains as environmentally safe. The results received evidence the necessity for consideration of COD index only as an index of oxidized substances, but not the criteria of waste pollution.

  8. Positive organizational behavior and safety in the offshore oil industry: Exploring the determinants of positive safety climate.

    Science.gov (United States)

    Hystad, Sigurd W; Bartone, Paul T; Eid, Jarle

    2014-01-01

    Much research has now documented the substantial influence of safety climate on a range of important outcomes in safety critical organizations, but there has been scant attention to the question of what factors might be responsible for positive or negative safety climate. The present paper draws from positive organizational behavior theory to test workplace and individual factors that may affect safety climate. Specifically, we explore the potential influence of authentic leadership style and psychological capital on safety climate and risk outcomes. Across two samples of offshore oil-workers and seafarers working on oil platform supply ships, structural equation modeling yielded results that support a model in which authentic leadership exerts a direct effect on safety climate, as well as an indirect effect via psychological capital. This study shows the importance of leadership qualities as well as psychological factors in shaping a positive work safety climate and lowering the risk of accidents.

  9. Positive organizational behavior and safety in the offshore oil industry: Exploring the determinants of positive safety climate

    Science.gov (United States)

    Hystad, Sigurd W.; Bartone, Paul T.; Eid, Jarle

    2013-01-01

    Much research has now documented the substantial influence of safety climate on a range of important outcomes in safety critical organizations, but there has been scant attention to the question of what factors might be responsible for positive or negative safety climate. The present paper draws from positive organizational behavior theory to test workplace and individual factors that may affect safety climate. Specifically, we explore the potential influence of authentic leadership style and psychological capital on safety climate and risk outcomes. Across two samples of offshore oil-workers and seafarers working on oil platform supply ships, structural equation modeling yielded results that support a model in which authentic leadership exerts a direct effect on safety climate, as well as an indirect effect via psychological capital. This study shows the importance of leadership qualities as well as psychological factors in shaping a positive work safety climate and lowering the risk of accidents. PMID:24454524

  10. Nuclear safety. ICFTU proposals for the international control of the nuclear energy industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-07-01

    are strong proponents of its use and others have said that they are only prepared to accept its application if safety controls are substantially improved. All affiliates of the ICFTU are convinced that energy policy options must be widened through increased research and development of new and renewable sources and through extensive energy conservation measures. The environmental impact of all methods of energy generation must be assessed on the basis of the public availability of all relevant information. It is in this context, that whatever their views about the desirability or otherwise of nuclear power, all ICFTU affiliates recognise the immediate need to assure the highest possible level of safety for all nuclear plants and activities everywhere - for example to deal with radioactive wastes created over the last 30 years. Even if some countries opt out of nuclear power it is likely that many others will be committed to it for many years. Given the widespread effects of a catastrophic failure anywhere in the world we must therefore all be concerned to strengthen the international safety regime. Because of their historic role in campaigning for health and safety at work, unions are well placed to exercise an independent watchdog role - making use of the knowledge and skills of their members in the nuclear industry - and are also able to speak on behalf of a large membership which is representative representative of the wide public concern about nuclear safety. Immediately following the Chernobyl disaster, the ICFTU Executive Board adopted a resolution (reproduced as Appendix 2 to this document) calling for immediate steps to tighten up nuclear safety. In the light of subsequent developments, the Confederation has now given further detailed consideration to the whole question of nuclear safety and has decided to publish this report which contains detailed proposals for tighter international control of nuclear energy via the International Atomic Energy Agency (IAEA

  11. Nuclear safety. ICFTU proposals for the international control of the nuclear energy industry

    International Nuclear Information System (INIS)

    1989-01-01

    are strong proponents of its use and others have said that they are only prepared to accept its application if safety controls are substantially improved. All affiliates of the ICFTU are convinced that energy policy options must be widened through increased research and development of new and renewable sources and through extensive energy conservation measures. The environmental impact of all methods of energy generation must be assessed on the basis of the public availability of all relevant information. It is in this context, that whatever their views about the desirability or otherwise of nuclear power, all ICFTU affiliates recognise the immediate need to assure the highest possible level of safety for all nuclear plants and activities everywhere - for example to deal with radioactive wastes created over the last 30 years. Even if some countries opt out of nuclear power it is likely that many others will be committed to it for many years. Given the widespread effects of a catastrophic failure anywhere in the world we must therefore all be concerned to strengthen the international safety regime. Because of their historic role in campaigning for health and safety at work, unions are well placed to exercise an independent watchdog role - making use of the knowledge and skills of their members in the nuclear industry - and are also able to speak on behalf of a large membership which is representative representative of the wide public concern about nuclear safety. Immediately following the Chernobyl disaster, the ICFTU Executive Board adopted a resolution (reproduced as Appendix 2 to this document) calling for immediate steps to tighten up nuclear safety. In the light of subsequent developments, the Confederation has now given further detailed consideration to the whole question of nuclear safety and has decided to publish this report which contains detailed proposals for tighter international control of nuclear energy via the International Atomic Energy Agency (IAEA

  12. Radiological protection, safety and security issues in the industrial and medical applications of radiation sources

    International Nuclear Information System (INIS)

    Vaz, Pedro

    2015-01-01

    The use of radiation sources, namely radioactive sealed or unsealed sources and particle accelerators and beams is ubiquitous in the industrial and medical applications of ionizing radiation. Besides radiological protection of the workers, members of the public and patients in routine situations, the use of radiation sources involves several aspects associated to the mitigation of radiological or nuclear accidents and associated emergency situations. On the other hand, during the last decade security issues became burning issues due to the potential malevolent uses of radioactive sources for the perpetration of terrorist acts using RDD (Radiological Dispersal Devices), RED (Radiation Exposure Devices) or IND (Improvised Nuclear Devices). A stringent set of international legally and non-legally binding instruments, regulations, conventions and treaties regulate nowadays the use of radioactive sources. In this paper, a review of the radiological protection issues associated to the use of radiation sources in the industrial and medical applications of ionizing radiation is performed. The associated radiation safety issues and the prevention and mitigation of incidents and accidents are discussed. A comprehensive discussion of the security issues associated to the global use of radiation sources for the aforementioned applications and the inherent radiation detection requirements will be presented. Scientific, technical, legal, ethical, socio-economic issues are put forward and discussed. - Highlights: • The hazards associated to the use of radioactive sources must be taken into account. • Security issues are of paramount importance in the use of radioactive sources. • Radiation sources can be used to perpetrate terrorist acts (RDDs, INDs, REDs). • DSRS and orphan sources trigger radiological protection, safety and security concerns. • Regulatory control, from cradle to grave, of radioactive sources is mandatory.

  13. Influence of different safety shoes on gait and plantar pressure: a standardized examination of workers in the automotive industry.

    Science.gov (United States)

    Ochsmann, Elke; Noll, Ulrike; Ellegast, Rolf; Hermanns, Ingo; Kraus, Thomas

    2016-09-30

    Working conditions, such as walking and standing on hard surfaces, can increase the development of musculoskeletal complaints. At the interface between flooring and musculoskeletal system, safety shoes may play an important role in the well-being of employees. The aim of this study was to evaluate the effects of different safety shoes on gait and plantar pressure distributions on industrial flooring. Twenty automotive workers were individually fitted out with three different pairs of safety shoes ( "normal" shoes, cushioned shoes, and midfoot bearing shoes). They walked at a given speed of 1.5 m/s. The CUELA measuring system and shoe insoles were used for gait analysis and plantar pressure measurements, respectively. Statistical analysis was conducted by ANOVA analysis for repeated measures. Walking with cushioned safety shoes or a midfoot bearing safety shoe led to a significant decrease of the average trunk inclination (pshoes as well as midfoot bearing shoes (pshoes. As expected, plantar pressure distributions varied significantly between cushioned or midfoot bearing shoes and shoes without ergonomic components. The overall function of safety shoes is the avoidance of injury in case of an industrial accident, but in addition, safety shoes could be a long-term preventive instrument for maintaining health of the employees' musculoskeletal system, as they are able to affect gait parameters. Further research needs to focus on safety shoes in working situations.

  14. The responsible for the radiological safety in the industry. Between the environment work and the technology

    International Nuclear Information System (INIS)

    Truppa, Walter Adrian

    2005-01-01

    Within the industrial applications of sealed radioactive sources, there are two clearly defined branches for which these materials are used: radioactive sources used in fixed and mobile equipment. These devices are used in a myriad of applications and each time with more technological advanced systems. This requires a permanent improvement on the training of the responsible, and introduces a mandatory exchange to other groups of intervention during the useful life of the device. Accident risks during the use of the equipment, although its rate of occurrence is low, are related to mistakes during operation, improper use, maintenance performed by staff without knowledge, human failures or oversights and incidents occurring during transport. All these risks are surrounded by different groups of factors that influence during the safe use of radioactive material within the installation. So, it is evidenced the importance of implementing aspects of the 'Safety Culture' and evaluations of suitability of the person responsible for radiation safety. In this paper we will refer to all the concepts that surround the election of the head of radioactive material, the factors involved during the operation, their training, the obligations of the installation, and responsible for environment and the technology

  15. Cross-Index to DOE-prescribed industrial safety codes and standards

    International Nuclear Information System (INIS)

    1980-01-01

    This Cross-Index volume is the 1980 compilation of detailed information from more than two hundred and ninety Department of Energy (DOE) prescribed or Occupational Health and Safety Administration (OSHA) referenced industrial safety codes and standards. The compilation of this material was conceived and initiated in 1973, and is revised yearly to provide information from current codes. Condensed data from individual code portions are listed according to reference code, section, paragraph, and page. Each code is given a two-digit reference code number or letter in the Contents section. This reference code provides ready identification of any code listed in the Cross-Index. The computerized information listings are on the left-hand portion of Cross-Index page; in order to the right of the listing are the reference code letters or numbers, the section, paragraph, and page of the referenced code containing expanded information on the individual listing. Simplified How to Use directions are listed. A glossary of letter initials/abbreviations for the organizations or documents, whose codes or standards are contained in this Cross-Index, is included

  16. Machine-related injuries in the US mining industry and priorities for safety research.

    Science.gov (United States)

    Ruff, Todd; Coleman, Patrick; Martini, Laura

    2011-03-01

    Researchers at the National Institute for Occupational Safety and Health studied mining accidents that involved a worker entangled in, struck by, or in contact with machinery or equipment in motion. The motivation for this study came from the large number of severe accidents, i.e. accidents resulting in a fatality or permanent disability, that are occurring despite available interventions. Accident descriptions were taken from an accident database maintained by the United States Department of Labor, Mine Safety and Health Administration, and 562 accidents that occurred during 2000-2007 fit the search criteria. Machine-related accidents accounted for 41% of all severe accidents in the mining industry during this period. Machinery most often involved in these accidents included conveyors, rock bolting machines, milling machines and haulage equipment such as trucks and loaders. The most common activities associated with these accidents were operation of the machine and maintenance and repair. The current methods to safeguard workers near machinery include mechanical guarding around moving components, lockout/tagout of machine power during maintenance and backup alarms for mobile equipment. To decrease accidents further, researchers recommend additional efforts in the development of new control technologies, training materials and dissemination of information on best practices.

  17. Hurricane Harvey, Houston's Petrochemical Industry, and US Chemical Safety Policy: Impacts to Environmental Justice Communities

    Science.gov (United States)

    Goldman, G. T.; Johnson, C.; Gutierrez, A.; Declet-Barreto, J.; Berman, E.; Bergman, A.

    2017-12-01

    When Hurricane Harvey made landfall outside Houston, Texas, the storm's wind speeds and unprecedented precipitation caused significant damage to the region's petrochemical infrastructure. Most notably, the company Arkema's Crosby facility suffered a power failure that led to explosions and incineration of six of its peroxide tanks. Chemicals released into the air from the explosions sent 15 emergency responders to the hospital with severe respiratory conditions and led to the evacuation of hundreds of surrounding households. Other petrochemical facilities faced other damages that resulted in unsafe and acute chemical releases into the air and water. What impacts did such chemical disasters have on the surrounding communities and emergency responders during Harvey's aftermath? What steps might companies have taken to prevent such chemical releases? And what chemical safety policies might have ensured that such disaster risks were mitigated? In this talk we will report on a survey of the extent of damage to Houston's oil and gas infrastructure and related chemical releases and discuss the role of federal chemical safety policy in preventing and mitigating the potential for such risks for future storms and other extreme weather and climate events. We will also discuss how these chemical disasters created acute toxics exposures on environmental justice communities already overburdened with chronic exposures from the petrochemical industry.

  18. Instilling safety culture in the passenger rail transport industry within the South African context

    Directory of Open Access Journals (Sweden)

    Khulumane (John Maluleke

    2013-07-01

    Full Text Available South Africa has two major rail operators that constitute the rail transport industry. These are Transnet Freight Rail (TFR, which operates freight and the Passenger Rail Agency of South Africa (PRASA. Although the Railway Safety Regulator (2011:29 reported the year on year declining trend of collisions, the main concern is that the costs incurred for each year’s incidents is escalating. This article is concerned with the declining safety standards of these operators as evidenced by 742 collisions recorded during the 2011/2012 financial year for both operators. The focus is mainly on collisions during the movement of rolling stock within the PRASA environment. The analysis of the occurrences is narrowed down, with the emphasis on the province of Gauteng. In the analysis of the causes of these collisions, the problems that led to the root causes of these collisions is reported. Of critical importance is that every transport operator is faced with the challenges of how to effectively respond to the basic transport needs and requirements of the travelling public. The transport users’ need is to travel between the two geographical points. During the journey between these geographical points, the operator has safety and security requirements and must provide a reliable, accessible and affordable transport system. As the travelling public becomes more affluent, the transport needs become open ended and require much more rational public choices. The rail transport system remains a vital or indispensable business sector of the economy. By investing in new technology, rolling stock and infrastructure, we woud see an increase in innovation, competitiveness, and an elevated standard of living.

  19. Radiation safety aspects in application of isotopes for industrial radiography in Bangladesh

    Energy Technology Data Exchange (ETDEWEB)

    Bakht, D. [Titas Gas Transmission and Distribution Company, Dhaka (Bangladesh)

    1997-10-01

    Industrial Radiography arose out of the widespread applications of X-rays pioneered by Roentgen about 100 years back. It is routinely used in studying the integrity of structural materials and like most countries in the world, its use in Bangladesh is increasing at a faster rate. This is because Bangladesh is a developing country of 3rd world and in the backdrop of agrarian poverty ridden economy, its population may exceed 125 millions by 2000 AD, leaving some 12 millions people unemployed. To support them, therefore, immense activities are activated in different sectors. Accordingly, increasing importance on NDT is given and in most cases particular application of Gamma radiography is preferred using Iridium Isotope Ir-192. Consequently the points of implications of isotopes are in Open Field and Inservice Inspection Radiography, Handling of Radiation Emergencies, Safe Transport of Radioactive Materials and Hazardous Effects and Risk of Ionizing Radiation, etc. Accordingly over exposure of Ir-192 Radionuclides, Accidents and Unusual Occurrences: Case Studies, Training Courses on Safety and Regulation of Sealed Sources, Licenses for Radiography Operation including Safe Disposal of Isotopes are the salient issues to be viewed in appropriate perspectives. The role played by Bangladesh Atomic Energy Commission and Bangladesh Society for NDT in collaboration with other members of the international committee for NDT are furthering the safe industrialization process

  20. Radiological protection, safety and security issues in the industrial and medical applications of radiation sources

    Science.gov (United States)

    Vaz, Pedro

    2015-11-01

    The use of radiation sources, namely radioactive sealed or unsealed sources and particle accelerators and beams is ubiquitous in the industrial and medical applications of ionizing radiation. Besides radiological protection of the workers, members of the public and patients in routine situations, the use of radiation sources involves several aspects associated to the mitigation of radiological or nuclear accidents and associated emergency situations. On the other hand, during the last decade security issues became burning issues due to the potential malevolent uses of radioactive sources for the perpetration of terrorist acts using RDD (Radiological Dispersal Devices), RED (Radiation Exposure Devices) or IND (Improvised Nuclear Devices). A stringent set of international legally and non-legally binding instruments, regulations, conventions and treaties regulate nowadays the use of radioactive sources. In this paper, a review of the radiological protection issues associated to the use of radiation sources in the industrial and medical applications of ionizing radiation is performed. The associated radiation safety issues and the prevention and mitigation of incidents and accidents are discussed. A comprehensive discussion of the security issues associated to the global use of radiation sources for the aforementioned applications and the inherent radiation detection requirements will be presented. Scientific, technical, legal, ethical, socio-economic issues are put forward and discussed.

  1. Radiation safety aspects in application of isotopes for industrial radiography in Bangladesh

    International Nuclear Information System (INIS)

    Bakht, D.

    1997-01-01

    Industrial Radiography arose out of the widespread applications of X-rays pioneered by Roentgen about 100 years back. It is routinely used in studying the integrity of structural materials and like most countries in the world, its use in Bangladesh is increasing at a faster rate. This is because Bangladesh is a developing country of 3rd world and in the backdrop of agrarian poverty ridden economy, its population may exceed 125 millions by 2000 AD, leaving some 12 millions people unemployed. To support them, therefore, immense activities are activated in different sectors. Accordingly, increasing importance on NDT is given and in most cases particular application of Gamma radiography is preferred using Iridium Isotope Ir-192. Consequently the points of implications of isotopes are in Open Field and Inservice Inspection Radiography, Handling of Radiation Emergencies, Safe Transport of Radioactive Materials and Hazardous Effects and Risk of Ionizing Radiation, etc. Accordingly over exposure of Ir-192 Radionuclides, Accidents and Unusual Occurrences: Case Studies, Training Courses on Safety and Regulation of Sealed Sources, Licenses for Radiography Operation including Safe Disposal of Isotopes are the salient issues to be viewed in appropriate perspectives. The role played by Bangladesh Atomic Energy Commission and Bangladesh Society for NDT in collaboration with other members of the international committee for NDT are furthering the safe industrialization process

  2. Use of toxicogenomics in drug safety evaluation: Current status and an industry perspective.

    Science.gov (United States)

    Vahle, John L; Anderson, Ulf; Blomme, Eric A G; Hoflack, Jean-Christophe; Stiehl, Daniel P

    2018-04-18

    Toxicogenomics held great promise as an approach to enable early detection of toxicities induced by xenobiotics; however, there remain questions regarding the impact of the discipline on pharmaceutical nonclinical safety assessment. To understand the current state of toxicogenomics in the sector, an industry group surveyed companies to determine the frequency of toxicogenomics use in in vivo studies at various stages of drug discovery and development and to assess how toxicogenomics use has evolved over time. Survey data were compiled during 2016 from thirteen pharmaceutical companies. Toxicogenomic analyses were infrequently conducted in the development phase and when performed were done to address specific mechanistic questions. Prior to development, toxicogenomics use was more frequent; however, there were significant differences in approaches among companies. Across all phases, gaining mechanistic insight was the most frequent reason cited for pursing toxicogenomics with few companies using toxicogenomics to predict toxicities. These data were consistent with the commentary submitted in response to survey questions asking companies to describe the evolution of their toxicogenomics strategy. Overall, these survey data indicate that toxicogenomics is not widely used as a predictive tool in the pharmaceutical industry but is used regularly by some companies and serves a broader role in mechanistic investigations and as a complement to other technologies. Copyright © 2018. Published by Elsevier Inc.

  3. Industry-specific risk models for numerical scoring of hazards and prioritization of safety measures

    International Nuclear Information System (INIS)

    Khali, Y.F.; Johnson, K.

    2004-01-01

    Risk analysis consists of five cornerstones that have to be viewed in an holistic manner by risk practitioners of any organization regardless of the industry type or nature of its critical infrastructures. The cornerstones are hazard identification, risk assessment and consequence analysis, determination of risk management actions required to reduce risks to acceptable levels, communication of risk insights among the stake-holders, and continuous monitoring and verification to ensure sustained attainment of tolerable risk levels. Our primary objectives in this research are two fold: first, we compare and contrast a wide spectrum of current industry-specific and application-dependent semi-quantitative risk models. Secondly, based on the insights to be gained from the first task, we propose a framework for a robust risk-based approach for conducting security vulnerability assessment (SVA). Risk practitioners of critical infrastructures, such as commercial nuclear power plants, water utilities, chemical plants, transmission and distribution substations... etc., could readily use this proposed approach to classify, evaluate, and prioritize risks to support allocation of resources required to ensure protection of public health and safety. (author)

  4. An empirical investigation of the work environment on board industrial- and cruise ships and the associations with safety

    OpenAIRE

    Heidenstrøm, Øyvind Teige

    2011-01-01

    The overall aim of this study was to examine the work environment and the associations with safety, and see the relations with occupational accidents and undesired events on board industrial and cruise ships. 215 seafarers participated in this quantitative survey study, with a response rate of 35%. When conducting the hierarchical block regression analysis separately on superiors/officers and subordinates/ratings, the work environment emerged as a predictor for safety status (compliance, atti...

  5. Influence of different safety shoes on gait and plantar pressure: a standardized examination of workers in the automotive industry

    OpenAIRE

    Ochsmann, Elke; Noll, Ulrike; Ellegast, Rolf; Hermanns, Ingo; Kraus, Thomas

    2016-01-01

    Objective: Working conditions, such as walking and standing on hard surfaces, can increase the development of musculoskeletal complaints. At the interface between flooring and musculoskeletal system, safety shoes may play an important role in the well-being of employees. The aim of this study was to evaluate the effects of different safety shoes on gait and plantar pressure distributions on industrial flooring. Methods: Twenty automotive workers were individually fitted out with three differe...

  6. Safety leadership and systems thinking: application and evaluation of a Risk Management Framework in the mining industry.

    Science.gov (United States)

    Donovan, Sarah-Louise; Salmon, Paul M; Lenné, Michael G; Horberry, Tim

    2017-10-01

    Safety leadership is an important factor in supporting safety in high-risk industries. This article contends that applying systems-thinking methods to examine safety leadership can support improved learning from incidents. A case study analysis was undertaken of a large-scale mining landslide incident in which no injuries or fatalities were incurred. A multi-method approach was adopted, in which the Critical Decision Method, Rasmussen's Risk Management Framework and Accimap method were applied to examine the safety leadership decisions and actions which enabled the safe outcome. The approach enabled Rasmussen's predictions regarding safety and performance to be examined in the safety leadership context, with findings demonstrating the distribution of safety leadership across leader and system levels, and the presence of vertical integration as key to supporting the successful safety outcome. In doing so, the findings also demonstrate the usefulness of applying systems-thinking methods to examine and learn from incidents in terms of what 'went right'. The implications, including future research directions, are discussed. Practitioner Summary: This paper presents a case study analysis, in which systems-thinking methods are applied to the examination of safety leadership decisions and actions during a large-scale mining landslide incident. The findings establish safety leadership as a systems phenomenon, and furthermore, demonstrate the usefulness of applying systems-thinking methods to learn from incidents in terms of what 'went right'. Implications, including future research directions, are discussed.

  7. Rent-seeking mechanism for safety supervision in the Chinese coal industry based on a tripartite game model

    International Nuclear Information System (INIS)

    Chen, Hong; Feng, Qun; Cao, Jing

    2014-01-01

    There are extensive governmental rent-seeking activities in safety supervision of the Chinese coal industry. The rents come from industry safety barriers, low resource taxes, and privilege policies for coalmining enterprises. The rent-seeking mechanism was analyzed using a model comprising dynamic games with incomplete information. The equilibrium results indicate that the probability of national supervision is influenced by penalties and bribery: there is negative correlation with penalties and positive correlation with bribery. The rent-seeking probability of a governmental safety supervision department is influenced by several factors, and positively correlates with the cost of national supervision. The probability of bribery of coalmining enterprises is influenced by several factors, and positively correlates with wages of governmental departments and a reasonable rent-seeking range. Reversed rent-seeking reduces the probability of bribery, but it's not worth recommending. Some recommendations are proposed. - Highlights: • We analyze rent-seeking mechanism for safety supervision in the coal industry. • A dynamic game with incomplete information for Chinese coal industry is built. • Reversed rent-seeking is proposed as a new rent-seeking form. • We analyze the selection probability of the three participants. • We give some policies about how to enhance safety supervision

  8. Safety in New Zealand's adventure tourism industry: the client accident experience of adventure tourism operators.

    Science.gov (United States)

    Bentley , T A; Page, S J; Laird, I S

    2000-01-01

    Injuries and fatalities among participants of adventure tourism activities have the potential to seriously impact on New Zealand's tourism industry. However, the absence of statistics for tourist accidents in New Zealand, and the lack of detailed academic research into adventure tourism safety, means the extent of the problem is unknown. The aims of the present study were to determine the incidence of client injuries across a range of adventure tourism activity sectors, and to identify common accident events and contributory risk factors. A postal questionnaire survey of New Zealand adventure tourism operators was used. Operators were asked to provide information related to their business; the number of recorded client injuries during the preceding 12 month period, January to December 1998; common accident and injury events associated with their activity; and perceived risk factors for accidents in their sector of the adventure tourism industry. The survey was responded to by 142 New Zealand adventure tourism operators. The operators' reported client injury experience suggests the incidence of serious client injuries is very low. Highest client injury incidence rates were found for activities that involved the risk of falling from a moving vehicle or animal (e.g., cycle tours, quad biking, horse riding, and white-water rafting). Slips, trips, and falls on the level were common accident events across most sectors of the industry. Perceived accident/incident causes were most commonly related to the client, and in particular, failure to attend to and follow instructions. The prevalence of client injuries in activity sectors not presently covered by government regulation, suggests policy makers should look again at extending codes of practice to a wider range of adventure tourism activities. Further research considering adventure tourism involvement in overseas visitor hospitalized injuries in New Zealand, is currently in progress. This will provide supporting evidence

  9. Risk management strategy to increase the safety of workers in the nanomaterials industry

    Energy Technology Data Exchange (ETDEWEB)

    Ling, Min-Pei, E-mail: lingmp@mail.cmu.edu.tw [Department of Health Risk Management, China Medical University, Taichung 40402, Taiwan, ROC (China); Lin, Wei-Chao; Liu, Chia-Chyuan [Department of Cosmetic Science, Chia Nan University of Pharmacy and Science, Tainan 71710, Taiwan, ROC (China); Huang, Yi-Shiao; Chueh, Miao-Ju [Industrial Safety and Health Association of the ROC, Taipei 11670, Taiwan, ROC (China); Shih, Tung-Sheng [Institute of Occupational Safety and Health, Council of Labor Affairs, Taipei 22143, Taiwan, ROC (China)

    2012-08-30

    Highlights: Black-Right-Pointing-Pointer On-site assessment of nanomaterials using physiochemical and cytotoxic analysis can help identify risks for each nanomaterials manufacturing plant. Black-Right-Pointing-Pointer The risk of the nanomaterials manufacturing plants can be divided into three levels based on exposure routes (tier 1), aspect identification (tier 2), and toxicological screening (tier 3). Black-Right-Pointing-Pointer According to the different risk levels, the precautionary risk management (PRM) such as technology control, engineering control, and personal protective equipment were applied. Black-Right-Pointing-Pointer The PRM strategy can be effectively reduced workers risks for nanomaterial industries. - Abstract: In recent years, many engineered nanomaterials (NMs) have been produced, but increasing research has revealed that these may have toxicities far greater than conventional materials and cause significant adverse health effects. At present, there is insufficient data to determine the permissible concentrations of NMs in the workplace. There is also a lack of toxicity data and environmental monitoring results relating to complete health risk assessment. In view of this, we believe that workers in the NMs industry should be provided with simple and practical risk management strategy to ensure occupational health and safety. In this study, we developed a risk management strategy based on the precautionary risk management (PRM). The risk of the engineered NMs manufacturing plants can be divided into three levels based on aspect identification, solubility tests, dermal absorption, and cytotoxic analyses. The risk management strategies include aspects relating to technology control, engineering control, personal protective equipment, and monitoring of the working environment for each level. Here we report the first case in which a simple and practical risk management strategy applying in specific engineered NMs manufacturing plants. We are

  10. Risk management strategy to increase the safety of workers in the nanomaterials industry

    International Nuclear Information System (INIS)

    Ling, Min-Pei; Lin, Wei-Chao; Liu, Chia-Chyuan; Huang, Yi-Shiao; Chueh, Miao-Ju; Shih, Tung-Sheng

    2012-01-01

    Highlights: ► On-site assessment of nanomaterials using physiochemical and cytotoxic analysis can help identify risks for each nanomaterials manufacturing plant. ► The risk of the nanomaterials manufacturing plants can be divided into three levels based on exposure routes (tier 1), aspect identification (tier 2), and toxicological screening (tier 3). ► According to the different risk levels, the precautionary risk management (PRM) such as technology control, engineering control, and personal protective equipment were applied. ► The PRM strategy can be effectively reduced workers risks for nanomaterial industries. - Abstract: In recent years, many engineered nanomaterials (NMs) have been produced, but increasing research has revealed that these may have toxicities far greater than conventional materials and cause significant adverse health effects. At present, there is insufficient data to determine the permissible concentrations of NMs in the workplace. There is also a lack of toxicity data and environmental monitoring results relating to complete health risk assessment. In view of this, we believe that workers in the NMs industry should be provided with simple and practical risk management strategy to ensure occupational health and safety. In this study, we developed a risk management strategy based on the precautionary risk management (PRM). The risk of the engineered NMs manufacturing plants can be divided into three levels based on aspect identification, solubility tests, dermal absorption, and cytotoxic analyses. The risk management strategies include aspects relating to technology control, engineering control, personal protective equipment, and monitoring of the working environment for each level. Here we report the first case in which a simple and practical risk management strategy applying in specific engineered NMs manufacturing plants. We are confident that our risk management strategy can be effectively reduced engineered NM industries risks for

  11. Execution of the Occupational Safety and Health Act (1994) in the Construction Industry from Contractors’ Point of View

    OpenAIRE

    Awang H.; Kamil I.M.

    2014-01-01

    Construction is one of the highest contributing industries to occupational accidents by sector in Malaysia. Statistics have been drawn from year to year that show an increasing number of cases of accidents by industry sector. While it is impossible to completely eliminate all accidents, with a proper and effective safety and health policy or rules set by top management, especially contractors, the rate of accidents on construction sites can be reduced. The main objective of this study is to a...

  12. On Upbringing of Pupils' Self-Educational Ability in Industrial Arts Eeducation (2) : On Improvement of Manufacture Desire on Woodworking Technology Education with Teaching Materials on Computer-

    OpenAIRE

    大迫, 靖雄; 田口, 浩継; オオサコ, ヤスオ; タグチ, ヒロツグ; Ohsako, Yasuo; Taguchi, Hirotugu

    1995-01-01

    In this paper, we do woodworking technology education in the two teaching methods (both the normal teaching plan and the teaching plan with teaching materials on computer) at junior high school, and investigate on improvement of the manufacture desire connected with upbringing of pupils' self-educatinal ability of industrial arts education with teaching materials on computer. The results obtained are summarized as follows : (1) Woodworking technology education by the teaching plan with teachi...

  13. Biocorrosion and biofouling of metals and alloys of industrial usage. Present state of the art at the beginning of the new millennium

    OpenAIRE

    Videla, H. A.

    2003-01-01

    An overview on the present state of the art on Biocorrosion and Biofouling of metals and alloys of industrial usage is offered on the basis of the experience gathered in our laboratory over 25 years of research. The key concepts to understand the main effects of microorganisms on metal decay are briefly discussed. New trends in monitoring and control strategies to mitigate biocorrosion and biofouling deleterious effects are also described. Several relevant cases of biocorrosion studied by our...

  14. Management of fire and industrial safety - challenges during commissioning of a NPP

    International Nuclear Information System (INIS)

    Maiti, Subhaschandra; Mohan, Nalini; Ghadge, S.G.; Bajaj, S.S.

    2006-01-01

    Construction and commissioning period of NPP are reduced world over drastically by stringent schedule for financial and economic reasons. For meeting the schedule, commissioning of components and systems are started immediate after installation, while construction activities are continued in parallel at the same place. Parallel activities' and 'Time Constraint' have brought new challenges to 'Management of Fire and Industrial Safely' during commissioning. An innovative approach was used during such phase of commissioning of TAPP-3 and 4. This paper outlines challenges encountered during this phase and special approach and measures used to meet those challenges. This paper also outlines problems encountered during implementation of these measures and subsequent change in approach to ensure smooth and safe execution of activities. Primarily, challenges were conflicting requirements by various agencies to carryout commissioning in parallel with construction activities concurrently. Main challenges were related to fall hazard, chemical hazard, fire hazard, electrical safety, work in confined space, housekeeping problem. Moreover it was within exclusion zone of another operating plant, which added one more dimension to those challenges. Conventional Safely management approach was little short to resolve these challenges. Such challenges were envisaged; analyzed and innovative measures were arrived at. Along with conventional safely analysis like Job Safely or Hazard Analysis (JSA or JHA), Accident Analysis, Accident Trend Analysis, Fire Hazard Analysis (FHA), innovative method like 'Area-Job- Hazard Charting' and 'Ratio Analysis' were used to understand activity dependent time varying hazard scenarios. Based on this analysis, decision were taken to change various existing elements of safely management like safety organizations; standard operating procedures (SOP); emergency operating procedures (EOP); resource allocation, planning and scheduling; safely training; safely

  15. Developing Measures for Assessing the Causality of Safety Culture in a Petrochemical Industry

    Energy Technology Data Exchange (ETDEWEB)

    Wu, T.-C., E-mail: tcwu@sunrise.hk.edu.t [HungKuang University, Department of Safety, Health and Environmental Engineering (China); Lin, C.-H.; Shiau, S.-Y. [HungKuang University, Institute of Occupational Safety and Hazard Prevention (China)

    2009-12-15

    This paper discusses safety culture in the petrochemical sector and the causes and consequences of safety culture. A sample of 520 responses selected by simple random sampling completed questionnaires for this survey, the return rate was 86.75%. The research instrument comprises four sections: basic information, the safety leadership scale (SLS), the safety climate scale (SCS), and the safety performance scale (SPS). SPSS 12.0, a statistical software package, was used for item analysis, validity analysis, and reliability analysis. Exploratory factor analysis indicated that (1) SLS abstracted three factors such as safety caring, safety controlling, and safety coaching; (2) SCS comprised three factors such as emergency response, safety commitment, and risk perception; and (3) SPS was composed of accident investigation, safety training, safety inspections, and safety motivation. We conclude that the SLS, SCS, and SPS developed in this paper have good construct validity and internal consistency and can serve as the basis for future research.

  16. Developing Measures for Assessing the Causality of Safety Culture in a Petrochemical Industry

    International Nuclear Information System (INIS)

    Wu, T.-C.; Lin, C.-H.; Shiau, S.-Y.

    2009-01-01

    This paper discusses safety culture in the petrochemical sector and the causes and consequences of safety culture. A sample of 520 responses selected by simple random sampling completed questionnaires for this survey, the return rate was 86.75%. The research instrument comprises four sections: basic information, the safety leadership scale (SLS), the safety climate scale (SCS), and the safety performance scale (SPS). SPSS 12.0, a statistical software package, was used for item analysis, validity analysis, and reliability analysis. Exploratory factor analysis indicated that (1) SLS abstracted three factors such as safety caring, safety controlling, and safety coaching; (2) SCS comprised three factors such as emergency response, safety commitment, and risk perception; and (3) SPS was composed of accident investigation, safety training, safety inspections, and safety motivation. We conclude that the SLS, SCS, and SPS developed in this paper have good construct validity and internal consistency and can serve as the basis for future research.

  17. Comparison of Safety Perception between Foreign and Local Workers in the Construction Industry in Republic of Korea

    Directory of Open Access Journals (Sweden)

    Serdar Korkmaz

    2018-03-01

    Full Text Available Background: Since the Republic of Korea became a labor-force-importing country, the number of foreign workers has increased gradually, especially in the construction industry. The main objective of this study was to examine the differences in safety perception between domestic and foreign workers at Korean construction sites. Methods: A total of 891 Korean and foreign workers were surveyed: 140 foreign and 751 Korean workers. The general characteristics and 25 factors influencing safety perception were considered in the questionnaire. Regression and correlation analyses were conducted to examine the variables of workers' safety perception. Results: Differences of nationality (F = 7.379, p < 0.001 and workplace accidents were statistically significant for both domestic (F = 1.503, p < 0.05 and foreign workers (F = 7.868, p < 0.05. In contrast, age, education, and Korean language level were significant variables only for foreign workers. Correlation coefficients of 0.428** for Korean and 0.148 for foreign workers between two items – namely, “management's commitment to safety” and “blaming staff when they make mistakes” – support the conclusion that foreign workers do not trust management's commitment to safety, while Korean workers have confidence in these commitments. Conclusion: Foreign workers' level of safety perception should rise to the same level as Korean workers, especially in terms of obeying safety rules, safety education performance, and safety beliefs. Therefore, an improvement plan for the Korean construction industry is suggested in order to have a better safety level at construction sites with foreign workers. Keywords: construction, foreign workers, Korean workers, safety perception

  18. Regulator and industry Co-operation on safety research: challenges and opportunities. Final report and answers to questionnaire

    International Nuclear Information System (INIS)

    2003-02-01

    A Group has been set up by the CSNI to identify and review the issues which hinder closer co-operation on research between regulators and industry, and to propose possible ways for resolving such issues while maintaining regulatory independence in decision-making. The Group has analyzed the potential advantages and disadvantages of regulator-industry collaboration in safety research and has also provided indications on how to overcome possible difficulties that can arise from such collaboration. The Group focused in particular on the issue of regulator independence, on means to preserve it and ways to demonstrate it to the public while undertaking collaboration with industry

  19. Managing change in the nuclear industry: The effects on safety. INSAG-18. A report by the International Nuclear Safety Advisory Group (Russian Edition)

    International Nuclear Information System (INIS)

    2015-01-01

    The nuclear industry is going through a period of unprecedented change. The changes arise from the political and business environment in which the industry must operate, and from within the industry itself as it strives to become more competitive. These pressures have already led to significant changes in how nuclear enterprises are organized. The changes can be expected to continue. It is absolutely essential that throughout the period of time that organizational changes are taking place, and after the changes have occurred, very high standards of safety are maintained by all the elements that make up the industry. Changes can be made effectively and safely, and gains in efficiency and competitiveness, as well as safety, can be realized if changes are introduced carefully and managed well. Experience has shown that this is not a simple matter to achieve. Nuclear installations are complex, and it is inherently demanding to foresee all the implications that a change may have on safety. However, experience has shown very clearly that many changes have a strong potential to affect both the safety that has been built into a design and in the safety culture of an organization. Hence failure to manage change well can significantly affect the likelihood of an accident, the degree to which the assets of the company are put at risk and the company's reputation. This INSAG report is directed at members of boards of directors and senior executives who are responsible for the overall safety of an installation, who make decisions for change and who implement these decisions. It is also written for senior regulators who, on behalf of the public, ensure that boards of directors and executives meet their responsibilities for safety. This report discusses how and why change can challenge the maintenance of a high level of safety, and what can be done to control that challenge and hence reap all the benefits of change. It draws an analogy between the well established principles

  20. Managing change in the nuclear industry: The effects on safety. INSAG-18. A report by the International Nuclear Safety Advisory Group

    International Nuclear Information System (INIS)

    2003-01-01

    The nuclear industry is going through a period of unprecedented change. The changes arise from the political and business environment in which the industry must operate, and from within the industry itself as it strives to become more competitive. These pressures have already led to significant changes in how nuclear enterprises are organized. The changes can be expected to continue. It is absolutely essential that throughout the period of time that organizational changes are taking place, and after the changes have occurred, very high standards of safety are maintained by all the elements that make up the industry. Changes can be made effectively and safely, and gains in efficiency and competitiveness, as well as safety, can be realized if changes are introduced carefully and managed well. Experience has shown that this is not a simple matter to achieve. Nuclear installations are complex, and it is inherently demanding to foresee all the implications that a change may have on safety. However, experience has shown very clearly that many changes have a strong potential to affect both the safety that has been built into a design and in the safety culture of an organization. Hence failure to manage change well can significantly affect the likelihood of an accident, the degree to which the assets of the company are put at risk and the company's reputation. This INSAG report is directed at members of boards of directors and senior executives who are responsible for the overall safety of an installation, who make decisions for change and who implement these decisions. It is also written for senior regulators who, on behalf of the public, ensure that boards of directors and executives meet their responsibilities for safety. This report discusses how and why change can challenge the maintenance of a high level of safety, and what can be done to control that challenge and hence reap all the benefits of change. It draws an analogy between the well established principles for

  1. Identification and assessment of organisational factors related to the safety of NPPs - State-of-the-Art Report

    International Nuclear Information System (INIS)

    Baumont, Genevieve; Bourrier, Mathilde; Frischknecht, Albert; Schoenfeld, Isabelle; Weber, Mike J.

    1999-01-01

    The initiation of this State-of-the-Art Report (SOAR) on Organisational Factors Identification and Assessment comes from operating experience associated with a number of major events world-wide which caused power plants to be shutdown for a significant period of time. Root cause assessments of these events identified weaknesses in organisational factors as contributing to these events. There is general recognition that organisational factors need to be evaluated for their contribution to plant safety performance and risk to prevent their recurrence in events. There is a need to collect and analyse operational and event data from the nuclear environment to determine the safety and risk significance of organisational factors, to identify assessment methods for those factors, and to gain peer review of the results to ensure credibility and acceptability of these methods and possibly their measures. The SOAR presents a representative view of developments in this field and addresses the following topics: - identification of organisational factors; - identification of methods for the evaluation of organisational factors; - identification of methods for the evaluation of whole organisations; - identification of gaps in knowledge and needed research to evaluate adequately the influence of organisation and management on safety and risk. The workshop participants identified 12 organisational factors as important to assess in determining organisational safety performance. They are: external influences; goals and strategies; management functions and overview; resource allocation; human resource management; training; co-ordination of work; organisational knowledge; proceduralization; organisational culture; organisational learning; and communication. Different cultural backgrounds of participants using their own terminology sometimes made it difficult to have a common definition for certain factors. Some factors could be defined by consensus; other factors such as

  2. 76 FR 65734 - Guidance for Industry on Evaluating the Safety of Flood-Affected Food Crops for Human Consumption...

    Science.gov (United States)

    2011-10-24

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-D-0733] Guidance for Industry on Evaluating the Safety of Flood-Affected Food Crops for Human Consumption; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug...

  3. 76 FR 62073 - Guidance for Industry on Implementation of the Fee Provisions of the FDA Food Safety...

    Science.gov (United States)

    2011-10-06

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-D-0721] Guidance for Industry on Implementation of the Fee Provisions of the FDA Food Safety Modernization Act; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug...

  4. 76 FR 20686 - Draft Guidance for Industry on Safety Labeling Changes; Implementation of the Federal Food, Drug...

    Science.gov (United States)

    2011-04-13

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-D-0164] Draft Guidance for Industry on Safety Labeling Changes; Implementation of the Federal Food, Drug, and Cosmetic Act; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and...

  5. 77 FR 44256 - Draft Guidance for Industry and Food and Drug Administration Staff; Safety Considerations for 510...

    Science.gov (United States)

    2012-07-27

    ...] Draft Guidance for Industry and Food and Drug Administration Staff; Safety Considerations for 510(k... serious and sometimes fatal consequences to patients. This guidance provides recommendations to 510(k... unintended connections between enteral and nonenteral devices. This draft guidance is not final nor is it in...

  6. Standard practice for design and use of safety alert system for hazardous work locations in the coatings and lining industry

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    This practice covers a safety alert system for hazardous work locations and materials for the coatings and lining application industry. This practice is designed for multi-employer work sites. Limitations--This practice does not identify specific hazardous materials or work locations but provides a means for rating each. This standard may involve hazardous materials, operations, and equipment

  7. 75 FR 71133 - Guidance for Industry: The Safety of Imported Traditional Pottery Intended for Use With Food and...

    Science.gov (United States)

    2010-11-22

    ... Nutrition (HFS-317), Food and Drug Administration, 5100 Paint Branch Pkwy., College Park, MD 20740. Send two... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-D-0571] Guidance for Industry: The Safety of Imported Traditional Pottery Intended for Use With Food and the Use of...

  8. Safety

    International Nuclear Information System (INIS)

    Jones, P.M.S.

    1987-01-01

    Aspects of fission reactors are considered - control, heat removal and containment. Brief descriptions of the reactor accidents at the SL-1 reactor (1961), Windscale (1957), Browns Ferry (1975), Three Mile Island (1979) and Chernobyl (1986) are given. The idea of inherently safe reactor designs is discussed. Safety assessment is considered under the headings of preliminary hazard analysis, failure mode analysis, event trees, fault trees, common mode failure and probabalistic risk assessments. These latter can result in a series of risk distributions linked to specific groups of fault sequences and specific consequences. A frequency-consequence diagram is shown. Fatal accident incidence rates in different countries including the United Kingdom for various industries are quoted. The incidence of fatal cancers from occupational exposure to chemicals is tabulated. Human factors and the acceptability of risk are considered. (U.K.)

  9. Beyond Texas City: the state of process safety in the unionized U.S. oil refining industry.

    Science.gov (United States)

    McQuiston, Thomas H; Lippin, Tobi Mae; Bradley-Bull, Kristin; Anderson, Joseph; Beach, Josie; Beevers, Gary; Frederick, Randy J; Frederick, James; Greene, Tammy; Hoffman, Thomas; Lefton, James; Nibarger, Kim; Renner, Paul; Ricks, Brian; Seymour, Thomas; Taylor, Ren; Wright, Mike

    2009-01-01

    The March 2005 British Petroleum (BP) Texas City Refinery disaster provided a stimulus to examine the state of process safety in the U.S. refining industry. Participatory action researchers conducted a nation-wide mail-back survey of United Steelworkers local unions and collected data from 51 unionized refineries. The study examined the prevalence of highly hazardous conditions key to the Texas City disaster, refinery actions to address those conditions, emergency preparedness and response, process safety systems, and worker training. Findings indicate that the key highly hazardous conditions were pervasive and often resulted in incidents or near-misses. Respondents reported worker training was insufficient and less than a third characterized their refineries as very prepared to respond safely to a hazardous materials emergency. The authors conclude that the potential for future disasters plagues the refining industry. In response, they call for effective proactive OSHA regulation and outline ten urgent and critical actions to improve refinery process safety.

  10. Identification and assessment of organisational factors related to the safety of NPPs - State-of-the-Art Report

    International Nuclear Information System (INIS)

    Baumont, Genevieve; Bourrier, Mathilde; Frischknecht, Albert; Schoenfeld, Isabelle; Weber, Mike J.

    1999-09-01

    The initiation of this State-of-the-Art Report (SOAR) on Organisational Factors Identification and Assessment comes from operating experience associated with a number of major events world-wide which caused power plants to be shutdown for a significant period of time. Root cause assessments of these events identified weaknesses in organisational factors as contributing to these events. There is general recognition that organisational factors need to be evaluated for their contribution to plant safety performance and risk to prevent their recurrence in events. A special recommendation to create a SOAR was presented in the NEA report on Research Strategies for Human Performance [NEA/CSNI/R(97)24]. Based on this recommendation the Principle Working Group 1 (PWG1) requested, as a top priority, that the Expanded Task Force (ETF) on Human Factors develop a SOAR for the September 1998 meeting. The ETF members were aware that it was a challenging topic. The field of organisational behaviour is not yet fully developed for the nuclear organisation. There is a need to collect and analyse operational and event data from the nuclear environment to determine the safety and risk significance of organisational factors, to identify assessment methods for those factors, and to gain peer review of the results to ensure credibility and acceptability of these methods and possibly their measures. This SOAR reports on the results of the workshop on Organisational Factors Identification and Assessment held in Boettstein Castle, Switzerland, on 14-19 June 1998. Twenty-eight participants from twelve Member countries and Russia represented three different environments: nuclear utilities; regulatory bodies and inspectorates; and the research and academic community. The various approaches discussed in the SOAR reflect the perspective of these entities. The SOAR addresses the following topics: - identification of organisational factors; - identification of methods for the evaluation of

  11. Analytical methodology for safety validation of computer controlled subsystems. Volume 1 : state-of-the-art and assessment of safety verification/validation methodologies

    Science.gov (United States)

    1995-09-01

    This report describes the development of a methodology designed to assure that a sufficiently high level of safety is achieved and maintained in computer-based systems which perform safety critical functions in high-speed rail or magnetic levitation ...

  12. Active safety of industrial vehicles - status report 2003; Stand der aktiven Sicherheit von Nutzfahrzeugen - Statusreport 2003

    Energy Technology Data Exchange (ETDEWEB)

    Glasner, E.C. von [DaimlerChrysler AG, Stuttgart (Germany)

    2003-07-01

    Systematic improvement of the safety of industrial vehicles will require the enhanced use of intelligent mechatronic systems, especially those that ensure higher directional stability. Further, improved tyres are required for making full use of these systems. Research on tyre improvements should focus on directional stability without neglecting classic parameters like wear, grip, and comfort. Last but not least, all systems should be available at reasonable cost. [German] Der systematische Weg, um die aktive Sicherheit von Nutzfahrzeugen weiter zu verbessern, wird mehr und mehr den Einsatz von intelligenten mechatronischen Systemen erfordern, besonders bei Systemen fuer die Verbesserung von Fahrstabilitaet von Einzelfahrzeugen und Lastzuegen. Hier spielt in kritischen fahrdynamischen Situationen aber auch die Leistungsfaehigkeit des Reifens eine grosse Rolle. Die Vorteile solcher Sicherheitssysteme koennen deshalb nur genutzt werden, wenn die Leistungsfaehigkeit der Reifen weiter gesteigert werden kann, d.h. die Betonung bei der Reifenentwicklung fuer Nutzfahrzeuge muss auf der Erhoehung der uebertragbaren Seiten- und Laengskraefte unter Beibehaltung des heutigen Schraegwinkel - und Schlupfniveaus liegen. Selbstverstaendlich darf eine solche Weiterentwicklung nicht die ueblichen Reifenparameter, wie z.B. Verschleiss, Rollwiderstand und Komfort negativ beeinflussen. Ein abschliessender Aspekt in diesem Prozess, den man nicht ignorieren kann, ist der Einsatz aller sicherheitsbezogenen Systeme zu einem vernuenftigen und akzeptablen Preis, wobei gleichzeitig die ganzheitliche Oekonomie des Nutzfahrzeugs positiv beeinflusst werden sollte. (orig.)

  13. Lecture notes on the safety aspects in the industrial applications of radiation sources - Part I

    International Nuclear Information System (INIS)

    The report comprises the notes of the lectures delivered on the safety aspects in industrial applications of radiation sources. The notes are presented in 9 chapters. Basic mathematics relevant to the topic and basic concepts of nuclear physics are introduced in chapters I and II respectively. Various aspects of interaction of radiation with matter and living cells are discussed in chapters III and IV respectively. The biological effects of ionizing radiations are described in chapter V. Various commonly used units of measurement of radiation and radioactivity are defined and explained and measuring methods of radiation exposure are described in chapter VI. Chapter VII deals with the maximum permissible levels of radiation, both internal and external, for occupational workers as well as population. The same chapter also deals with ICRP recommendations in this connection. Commonly used radiation detectors and instruments with associated electronics are described in chapter VIII. Production of radioisotopes, radiation sources and labelled compounds is described in chapter IX. A table of useful radioisotopes is appended to this chapter. A bibliography in which references are arranged chapterwise is also given at the end. (M.G.B.)

  14. Radiological safety programs in the petroleum and petrochemistry industry of Venezuela

    International Nuclear Information System (INIS)

    Romero M, C.

    1996-01-01

    A diagnosis carried out five years ago showed that in Petroleos de Venezuela (PDVSA) and its subsidiaries, exist about 530 radioactive sources. Also, about 1500 workers were also occupationally exposed, during operations such as industrial radiography and well logging. The same study determined the occurrence of some non-reported accidents and incidents with the overexposure of workers, specially contractors. Most of these problems were the result of the bad application of the radiological protection practices, and on the other hand, the disregarding of the governmental authorities in applying the regulatory standards. In order to solve this situation, PDVSA settled the safety guide for working with ionizing radiation, in which guidelines and technical advice are stablished to perform a safer work with radioactive elements. A radiological protection program was also organized in all the company operational areas. The paper includes the programs, practices and procedures implemented by PDVSA and its subsidiaries. Besides, the result of applying this comprehensive radiation protection program will be showed. (author). 1 ref

  15. Factors Associated with the Adoption of Food Safety Controls by the Mexican Meat Industry

    Science.gov (United States)

    Maldonado-Simán, Ema; Martínez-Hernández, Pedro Arturo; García-Muñiz, José G.; Cadena-Meneses, José

    Food marketing at international and domestic markets has focused on processing systems that improve food safety. The objective of this research is to determine the factors influencing the implementation of the HACCP system in the Mexican meat industry, and to identify the main marketing destination of their products. Only 18.5% of enterprises reports fully operational HACCP in their plants. The main destination of their production in the domestic market is supermarkets, suppliers and distributors and specific niches of the domestic market. Exports are to USA, Japan, Korea and Central America and some niches of the domestic market with requirements of higher quality. The four principal factors that motivate enterprises to adopt HACCP are associated with improvement of plant efficiency and profitability, adoption of good practices, improvement of product quality and waste reduction. It is concluded that Mexican enterprises adopt HACCP to successfully remain and face competition by foreign enterprises in the domestic market and to a lesser extent to compete in the international market.

  16. Prioritized schedule for review of industrial safety and occupational health programs

    International Nuclear Information System (INIS)

    1996-12-01

    This document provides the rationale and criteria for developing a schedule for reviewing the Industrial Safety and Occupational Health programs for the Management and Operating Contractor (MOC) of the Waste Isolation Pilot Plant. The reviews will evaluate the MOC's compliance with applicable Department of Energy (DOE) orders and regulatory requirements. The scope of this task includes developing prioritization criteria, determining the review priority of each program based upon the criteria, identifying review requirements for each program, and preparing a detailed review schedule. In keeping with the Carlsbad Area Office (CAO) structure for the review of site activities, these review activities will be addressed as surveillances, although the original basis for this requirement refers to these activities as appraisals. Surveillances and appraisals are the same within this document. Surveillances are defined as: ''The act of monitoring or observing to verify whether an item, activity, system, or process conforms to specified requirements. Surveillance of a technical work activity is normally done in real time, i.e., the surveillance is accomplished as the work is being performed.''

  17. Use of reactor plants of enhanced safety for sea water desalination, industrial and district heating

    International Nuclear Information System (INIS)

    Panov, Yu.; Polunichev, V.; Zverev, K.

    1997-01-01

    Russian designers have developed and can deliver nuclear complexes to provide sea water desalination, industrial and district heating. This paper provides an overview of these designs utilizing the ABV, KLT-40 and ATETS-80 reactor plants of enhanced safety. The most advanced nuclear powered water desalination project is the APVS-80. This design consists of a special ship equipped with the distillation desalination plant powered at a level of 160 MW(th) utilizing the type KLT-40 reactor plant. More than 20 years of experience with water desalination and reactor plants has been achieved in Aktau and Russian nuclear ships without radioactive contamination of desalinated water. Design is also proceeding on a two structure complex consisting of a floating nuclear power station and a reverse osmosis desalination plant. This new technology for sea water desalination provides the opportunity to considerably reduce the specific consumption of power for the desalination of sea water. The ABV reactor is utilized in the ''Volnolom'' type floating nuclear power stations. This design also features a desalinator ship which provides sea water desalination by the reverse osmosis process. The ATETS-80 is a nuclear two-reactor cogeneration complex which incorporates the integral vessel-type PWR which can be used in the production of electricity, steam, hot and desalinated water. (author). 9 figs

  18. The creative industries: conflict or collaboration? An analysis of the perspectives from which policymakers, art organizations and creative organizations in the creative industries are acting

    NARCIS (Netherlands)

    Nijzink, Douwe; van den Hoogen, Quirijn; Gielen, Pascal

    2015-01-01

    This paper compares and contrasts the instruments and values formulated in the creative industries policies of three peripheral municipalities of between 150,000 and 220,000 inhabitants in the Netherlands (Groningen, Arnhem and Eindhoven) with the needs of the creative industries itself. The needs

  19. Addressing safety issues through a joint industry programme; Traiter des problemes de securite a travers un programme industriel commun

    Energy Technology Data Exchange (ETDEWEB)

    Pool, G.; Williams, T.P. [BG Technology (United Kingdom); Jones, A.M. [Health and Safety Executive (United Kingdom)

    2000-07-01

    In an increasingly fragmented gas market, the focus for national gas safety may not rest with one major utility or gas supplier but may be spread across many companies. There will also be many new organisations in a liberalized gas industry with varying views on the needs and benefits of safety related technology development but all agree there is a need to ensure that the good safety record of gas as a domestic fuel is maintained. The number of carbon monoxide (CO) incidents is not decreasing significantly despite an increased awareness of the problem. As a consequence, a two-year joint industry programme addressing issues related to carbon monoxide has been established, co-ordinated by BG Technology and supported by gas organisations, government agencies, manufacturers and suppliers across Europe and the World. The 2-year 2 pound million programme has been constructed as twelve separate projects addressing issues such as the reporting and analysis of domestic incidents, improved service or installation practice, CO alarm reliability and information dissemination. The paper gives results and achievements of the programme, through new techniques, standards, procedures or equipment and demonstrates how the gas industry can work together to meet common safety objectives. (authors)

  20. State of the art of probabilistic safety analysis (PSA) in the FRG, and principles of a PSA-guideline

    International Nuclear Information System (INIS)

    Balfanz, H.P.

    1987-01-01

    Contents of the articles: Survey of PSA performed during licensing procedures of an NPP; German Nuclear Standards' requirements on the reliability of safety systems; PSA-guideline for NPP: Principles and suggestions; Motivation and tasks of PSA; Aspects of the methodology of safety analyses; Structure of event tree and fault tree analyses; Extent of safety analyses; Performance and limits of PSA. (orig./HSCH)

  1. A Randomized, Double-Blind, Placebo-Controlled, Phase 2b Study to Evaluate the Safety and Efficacy of Recombinant Human Soluble Thrombomodulin, ART-123, in Patients With Sepsis and Suspected Disseminated Intravascular Coagulation

    NARCIS (Netherlands)

    Vincent, Jean-Louis; Ramesh, Mayakonda K.; Ernest, David; Larosa, Steven P.; Pachl, Jan; Aikawa, Naoki; Hoste, Eric; Levy, Howard; Hirman, Joe; Levi, Marcel; Daga, Mradul; Kutsogiannis, Demetrios J.; Crowther, Mark; Bernard, Gordon R.; Devriendt, Jacques; Puigserver, Joan Vidal; Blanzaco, Daniel U.; Esmon, Charles T.; Parrillo, Joseph E.; Guzzi, Louis; Henderson, Seton J.; Pothirat, Chaicharn; Mehta, Parthiv; Fareed, Jawed; Talwar, Deepak; Tsuruta, Kazuhisa; Gorelick, Kenneth J.; Osawa, Yutaka; Kaul, Inder

    2013-01-01

    Objectives: To determine the safety and efficacy of recombinant thrombomodulin (ART-123) in patients with suspected sepsis-associated disseminated intravascular coagulation. Design: Phase 2b, international, multicenter, double-blind, randomized, placebo-controlled, parallel group, screening trial.

  2. Safety and human factors impacts of introducing quality management into high-risk industries: A field study

    International Nuclear Information System (INIS)

    Chollet, M.G.; Normier, C.; Girault, M.; Tasset, D.

    2002-01-01

    The Institute for Radiological Protection and Nuclear Safety has undertaken a study for getting a better understanding, especially in terms of Safety and Human Factors, of the changes caused by the progressive deployment of the Quality Management in French high risk industries. This study is based on both theoretical elements from the human sciences and management and practical elements from the field, collected from interviews in large French industrial sites involved in integrating this management method. The results show frequent discrepancies between theory, which is very positive and production-oriented, and reality, which is more complex and subtle, ever looking for trade-offs between production requirements and safety constraints. Thus, each step forward announced in the literature may be matched by possible steps backward in terms of safety on the ground. Where, in theory, processes enable practices to be mastered, in practice they can reduce autonomy and fossilize know-how. Where theoretically continuous improvement stimulates and strengthens performances, in reality it can also generate stress and deadlock. Where theoretically personal commitment and collective responsibility work towards all-out performance, in reality they can also operate to conceal safety deviations and infringements. The assessment of Quality Management processes in the nuclear field will benefit from these results raised from theoretical review and confirmed by similar management changes. (author)

  3. Safety Culture Assessment in Petrochemical Industry: A Comparative Study of Two Algerian Plants

    Directory of Open Access Journals (Sweden)

    Assia Boughaba

    2014-06-01

    Conclusion: The comparison between the two petrochemical plants of the group Sonatrach confirms these results in which Company A, the managers of which are English and Norwegian, distinguishes itself by the maturity of their safety culture has significantly higher evaluations than the company B, who is constituted of Algerian staff, in terms of safety management practices and safety performance.

  4. 75 FR 60129 - Draft Guidance for Industry and Investigators on Safety Reporting Requirements for...

    Science.gov (United States)

    2010-09-29

    ...., Bldg. 51, rm. 2201, Silver Spring, MD 20993-0002; or the Office of Communication, Outreach, and...'s ability to review critical safety information, improve safety monitoring of human drug and..., will represent the Agency's current thinking on safety reporting requirements for INDs and BA/BE...

  5. Artful creation

    DEFF Research Database (Denmark)

    Darsø, Lotte

    2013-01-01

    An introduction to the field of Arts-in-Business outlining 4 different approaches: 1) Art as decoration, 2) Art as intertainment, 3) Arts as instrumental, 4) Art as strategic......An introduction to the field of Arts-in-Business outlining 4 different approaches: 1) Art as decoration, 2) Art as intertainment, 3) Arts as instrumental, 4) Art as strategic...

  6. Investigation of ability to guess safety signs based on cognitive features in one of the petrochemical industries

    Directory of Open Access Journals (Sweden)

    G. A. Shirali

    2015-07-01

    .Conclusion: According to results of this study, use of principles of ergonomic design of signs and training are necessary to promote the ability to guess the safety signs to the minimum available standards. Therefore, it is possible to balance cognitive features especially “familiarity”, with the lowest score, and “meaningfulness” and “semantic closeness”, with the highest influential relationship with the ability to guess of signs. The developed regression model for this industry can be used to predict the ability to guess of safety signs in future studies

  7. Defining and Measuring Safety Climate: A Review of the Construction Industry Literature.

    Science.gov (United States)

    Schwatka, Natalie V; Hecker, Steven; Goldenhar, Linda M

    2016-06-01

    Safety climate measurements can be used to proactively assess an organization's effectiveness in identifying and remediating work-related hazards, thereby reducing or preventing work-related ill health and injury. This review article focuses on construction-specific articles that developed and/or measured safety climate, assessed safety climate's relationship with other safety and health performance indicators, and/or used safety climate measures to evaluate interventions targeting one or more indicators of safety climate. Fifty-six articles met our inclusion criteria, 80% of which were published after 2008. Our findings demonstrate that researchers commonly defined safety climate as perception based, but the object of those perceptions varies widely. Within the wide range of indicators used to measure safety climate, safety policies, procedures, and practices were the most common, followed by general management commitment to safety. The most frequently used indicators should and do reflect that the prevention of work-related ill health and injury depends on both organizational and employee actions. Safety climate scores were commonly compared between groups (e.g. management and workers, different trades), and often correlated with subjective measures of safety behavior rather than measures of ill health or objective safety and health outcomes. Despite the observed limitations of current research, safety climate has been promised as a useful feature of research and practice activities to prevent work-related ill health and injury. Safety climate survey data can reveal gaps between management and employee perceptions, or between espoused and enacted policies, and trigger communication and action to narrow those gaps. The validation of safety climate with safety and health performance data offers the potential for using safety climate measures as a leading indicator of performance. We discuss these findings in relation to the related concept of safety culture and

  8. The effects of electric power industry restructuring on the safety of nuclear power plants in the United States

    Science.gov (United States)

    Butler, Thomas S.

    Throughout the United States the electric utility industry is restructuring in response to federal legislation mandating deregulation. The electric utility industry has embarked upon an extraordinary experiment by restructuring in response to deregulation that has been advocated on the premise of improving economic efficiency by encouraging competition in as many sectors of the industry as possible. However, unlike the telephone, trucking, and airline industries, the potential effects of electric deregulation reach far beyond simple energy economics. This dissertation presents the potential safety risks involved with the deregulation of the electric power industry in the United States and abroad. The pressures of a competitive environment on utilities with nuclear power plants in their portfolio to lower operation and maintenance costs could squeeze them to resort to some risky cost-cutting measures. These include deferring maintenance, reducing training, downsizing staff, excessive reductions in refueling down time, and increasing the use of on-line maintenance. The results of this study indicate statistically significant differences at the .01 level between the safety of pressurized water reactor nuclear power plants and boiling water reactor nuclear power plants. Boiling water reactors exhibited significantly more problems than did pressurized water reactors.

  9. Establishing credibility in the environmental models used for safety and licensing calculations in the nuclear industry

    International Nuclear Information System (INIS)

    Davis, P.A.

    1997-01-01

    Models that simulate the transport and behaviour of radionuclides in the environment are used extensively in the nuclear industry for safety and licensing purposes. They are needed to calculate derived release limits for new and operating facilities, to estimate consequences following hypothetical accidents and to help manage a real emergency. But predictions generated for these purposes are essentially meaningless unless they are accompanied by a quantitative estimate of the confidence that can be placed in them. For example, in an emergency where there has been an accidental release of radioactivity to the atmosphere, decisions based on a validated model with small uncertainties would likely be very different from those based on an untested model, or on one with large uncertainties. This paper begins with a discussion of some general methods for establishing the credibility of model predictions. The focus will be on environmental transport models but the principles apply to models of all kinds. Establishing the credibility of a model is not a trivial task, It involves a number of tasks including face validation, verification, experimental validation and sensitivity and uncertainty analyses. The remainder of the paper will present quantitative results relating to the credibility of environmental transport models. Model formation, choice of parameter values and the influence of the user will all be discussed as sources of uncertainty in predictions. The magnitude of uncertainties that must be expected in various applications of the models will be presented. The examples used throughout the paper are drawn largely from recent work carried out in BIOMOVS and VAMP. (DM)

  10. Concrete Shielding For Radiation Safety And Unexpected Dangerous Inside Cobalt-60 Industrial Irradiator

    International Nuclear Information System (INIS)

    Keshk, A.B.; Aly, R.A.

    2011-01-01

    The study shows a proposed destruction inside one of three cobalt-60 industrial irradiators to determine and reduce the negative results, to improve and modify emergency plan to face terrorism works. The results show the performance of concrete shielding (walls and ceiling) contains the bad effect of dynamic pressures. The explosion forces are prevented to destructive by performance of their concrete shielding, which will contain the most components of devastated systems inside each irradiator after explosion. Shield penetration like electrical cable tunnels, pushers holes, hole with removable plug, product boxes openings, lens opening and ozone duct are affected badly by destruction. Through probability of transporting, some of devastated parts of broken radioactive cobalt- 60 pencils from inside radiation concreter room to outside (surrounded environment) are maintained and causing very danger radiation exposure by gamma rays outside irradiator. A necessity needs to modify emergency plan to prevent any explosive materials to enter inside the main building (irradiation sale) and also discovering any explosive materials which are placed inside the product boxes before passing to inside irradiator. The minimizing radiation exposure (2 mrem/h) inside underground radiation shelters are maintained by reducing radiation dose exerted from a nuclear explosion of 20 kT about 1 km away to a safe value, and calculating the protective factors of radiation main building basements are more than 40 (safety factor) as they are located under ground level, are surrounded by sandy soil and are constructed by concrete. The study shows the proposed basements of the main building maintain success to use as under ground safe radiation shelter (during emergency) with separate safe radiation trace. It begins from the main opening of irradiation sale and leads to underground proposed shelter through modified main stair

  11. [History of occupational health physician and industrial safety and health law].

    Science.gov (United States)

    Horie, Seichi

    2013-10-01

    In Japan, an employer of a workplace with 50 or more employees is legally required to assign an occupational health physician. The assignment rate in 2010 was reported as 87.0%. This policy started with the provision of "factory physician"in the Factory Law in 1938, then the Labour Standard Law stipulated "physician hygienist" in 1947, and finally the Industrial Safety and Health Law defined "occupational health physician" in 1972. In 1996, a revision of the law then required those physicians to complete training courses in occupational medicine, as designated by an ordinance. Historically, an on-site physician was expected to cure injuries and to prevent communicable diseases of factory workers. The means of occupational hygienic management by working environment measurements, etc., and of health management by health examinations, etc., were developed. Localized exhaust ventilation and personal protection equipment became widely utilized. Qualification systems for non-medical experts in occupational hygiene were structured, and relationships between employers and occupational health physicians were stipulated in the legislative documents. Currently, the Japan Medical Association and the University of Occupational and Environmental Health, Japan educate and train occupational health physicians, and the Japan Society for Occupational Health maintains a specialized board certification system for these physicians. In the future, additional efforts should be made to strengthen the expertise of occupational health physicians, to define and recognize the roles of non-medical experts in occupational hygiene, to incorporate occupational health services in small enterprises, to promote occupational health risk assessment in the workplace, and to reorganize the current legislation, amended repeatedly over the decades.

  12. A grey relational analytical approach to safety performance assessment in an aviation industry of a developing country

    Directory of Open Access Journals (Sweden)

    Ifeanyichukwu Ebubechukwu Onyegiri

    2017-03-01

    Full Text Available Safety in aviation impacts the overall success of the sector. It depends on the effectiveness and efficiency of safety management systems (SMSs, which contain diverse and complex elements. Thus, a quantitative methodology for aviation SMS in developing countries, capable of prioritising resources with incomplete information, is needed. Grey relational analysis (GRA is the most appropriate tool for this situation. This study assessed an existing SMS and determined its critical elements in a developing country’s aviation industry. Questionnaires were framed from the SMS manual of the International Civil Aviation Organization and from previous literature. The robustness and the efficiency of the approach were tested with data obtained from airline operators in Nigeria. Assessment of SMSs was done among airline service providers ascertaining the important levels of SMS elements. GRA was then applied to this data to identify the most influential elements of an SMS. Several companies were examined. Company A needs for a focus on sharing safety information and sensitization techniques to enable SMSs to better permeate through all levels, making employees aware of their SMS roles and duties to pursue a better safety culture. Company B needs to focus on more in-depth safety information dissemination platforms and methods. Non-punitive reporting should be done and safety promotion, culture, training and education should be prioritised. Company A has a better safety record than B. Overall, from the grey model, 12 critical elements were found out of 22 revised SMS elements that affect SMS. The major critical component was the safety structure and regulation. This is needed to build long lasting and effective SMSs. The novelty of this work is its unique application of GRA for a developing country’s airline safety.

  13. A Review of Wireless Sensor Technologies and Applications in Agriculture and Food Industry: State of the Art and Current Trends

    OpenAIRE

    Ruiz-Garcia, Luis; Lunadei, Loredana; Barreiro, Pilar; Robla, Jose Ignacio

    2009-01-01

    The aim of the present paper is to review the technical and scientific state of the art of wireless sensor technologies and standards for wireless communications in the Agri- Food sector. These technologies are very promising in several fields such as environmental monitoring, precision agriculture, cold chain control or traceability. The paper focuses on WSN (Wireless Sensor Networks) and RFID (Radio Frequency Identification), presenting the different systems available, recent developments a...

  14. Execution of the Occupational Safety and Health Act (1994 in the Construction Industry from Contractors’ Point of View

    Directory of Open Access Journals (Sweden)

    Awang H.

    2014-01-01

    Full Text Available Construction is one of the highest contributing industries to occupational accidents by sector in Malaysia. Statistics have been drawn from year to year that show an increasing number of cases of accidents by industry sector. While it is impossible to completely eliminate all accidents, with a proper and effective safety and health policy or rules set by top management, especially contractors, the rate of accidents on construction sites can be reduced. The main objective of this study is to analyse the degree of application of the Occupational Safety and Health Act 1994 (OSHA 1994 in the construction industry and to identify the contributing factors leading to a lack of execution of OSHA 1994 on construction sites with a primary focus on contractors’ point of view. Five on-going construction projects in Perak were selected as case studies and site inspections were conducted. The results showed that none of the contractors have fully implemented the rules and regulations provided by the government. Within this report, some recommendations are made towards enhancing the safety and health issues on construction sites.

  15. Radiation safety aspects in the use of radiation sources in industrial and heath-care applications

    International Nuclear Information System (INIS)

    Venkat Raj, V.

    2001-01-01

    The principle underlying the philosophy of radiation protection and safety is to ensure that there exists an appropriate standard of protection and safety for humans, without unduly limiting the benefits of the practices giving rise to exposure or incurring disproportionate costs in interventions. To realise these objectives, the International Commission on Radiation Protection (ICRP-60) and IAEA's Safety Series (IAEA Safety Series 120, 1996) have enunciated the following criteria for the application and use of radiation: (1) justification of practices; (2) optimisation of protection; (3) dose limitation and (4) safety of sources. Though these criteria are the basic tenets of radiation protection, the radiation hazard potentials of individual applications vary and the methods to achieve the above mentioned objectives principles are different. This paper gives a brief overview of the various applications of radiation and radioactive sources in India, their radiation hazard perspective and the radiation safety measures provided to achieve the basic radiation protection philosophy. (author)

  16. State-of-the-art report on systematic approaches to safety management - Special Expert Group on Human and Organisational Factors (SEGHOF)

    International Nuclear Information System (INIS)

    Van den Berghe, Yves; Frischknecht, Albert; Gil, Benito; Martin, Anibal; McRobbie, Helen; Reiersen, Craig; Tasset, Daniel; Aastrand, Kaisa; Dahlgren-Persson, Kerstin; Pyy, Pekka; Mauny, Elisabeth

    2006-02-01

    There is a growing awareness of the significant contribution which human and organisational factors (HOF) make to nuclear safety. Within the HOF area, attention is increasingly focused on addressing management and organisational issues. This reflects an evolving recognition that the members of a nuclear licensee form part of a socio-technological system, and that their performance is influenced by the organisation and the culture within that organisation. A series of events across the nuclear industry and other sectors has reinforced the appreciation of the importance of robust safety management. Also, the management and organisation of nuclear installations is impacted by a number of current challenges such as deregulation, change in institutional ownership of the industry, contractorization and an ageing plant and workforce. It is in this context that the CSNI (Committee on Safety of Nuclear Installations) Special Experts' Group on Human and Organisational Factors (SEGHOF) was requested by the CNRA (Committee on Nuclear Regulatory Actions) to examine the role and influence of safety management in nuclear plant operations in 2000. A workshop on 'systematic approaches to safety management' was held in spring 2002 and this was followed by a survey in 2003-4 of relevant practices and developments across licensees and regulators. This report provides a brief explanation of the relationship between safety management and safety culture. It reinforces the need for nuclear licensees and regulators to take positive steps to ensure that licensees develop and sustain a robust safety management system as a part of their management systems as a whole. The report draws out the main findings of the workshop and presents the results of the survey in more detail. It seeks to identify current issues and areas warranting further consideration. The workshop explored the development of current organisational theories and their application to nuclear plant safety management. It

  17. Industrialization

    African Journals Online (AJOL)

    Lucy

    . African states as ... regarded as the most important ingredients that went to add value to land and labour in order for countries ... B. Sutcliffe Industry and Underdevelopment (Massachusetts Addison – Wesley Publishing Company. 1971), pp.

  18. Industrialization

    African Journals Online (AJOL)

    Lucy

    scholar, Walt W. Rostow presented and supported this line of thought in his analysis of ... A Brief Historical Background of Industrialization in Africa ... indicative) The western model allowed for the political economy to be shaped by market.

  19. Does employee safety influence customer satisfaction? Evidence from the electric utility industry.

    Science.gov (United States)

    Willis, P Geoffrey; Brown, Karen A; Prussia, Gregory E

    2012-12-01

    Research on workplace safety has not examined implications for business performance outcomes such as customer satisfaction. In a U.S. electric utility company, we surveyed 821 employees in 20 work groups, and also had access to archival safety data and the results of a customer satisfaction survey (n=341). In geographically-based work units where there were more employee injuries (based on archival records), customers were less satisfied with the service they received. Safety climate, mediated by safety citizenship behaviors (SCBs), added to the predictive power of the group-level model, but these two constructs exerted their influence independently from actual injuries. In combination, two safety-related predictor paths (injuries and climate/SCB) explained 53% of the variance in customer satisfaction. Results offer preliminary evidence that workplace safety influences customer satisfaction, suggesting that there are likely spillover effects between the safety environment and the service environment. Additional research will be needed to assess the specific mechanisms that convert employee injuries into palpable results for customers. Better safety climate and reductions in employee injuries have the potential to offer payoffs in terms of what customers experience. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

  20. Safety philosophies in the history of the West German nuclear industry

    International Nuclear Information System (INIS)

    Radkau, J.

    1989-01-01

    The article discusses the term 'philosophy' within the framework of the safety debate, examines the philosophy of 'inherent safety' and that of 'power plant siting away from agglomerations', as well as other concepts and approaches in safety engineering, as e.g. the maximum credible accident, the MCA and probabilistic approach, the practice-oriented safety philosophy, and human factors. Participation of the public as a legal requirement is discussed as a means of balancing the interests of various groups of the society, taking into account the possibility of abandoning a technology altogether as an ultimate consequence of the principle of participation of the public. (HSCH) [de