Effect of sclerin on amino acid incorporation into mitochondria isolated from rat liver

Energy Technology Data Exchange (ETDEWEB)

Yamaguchi, M; Satomura, Y [Osaka City Univ. (Japan). Faculty of Science

1975-08-01

Though sclerin (SCL) stimulated amino acid incorporation into the protein fraction of post mitochondrial supernatant of rat liver homogenate, it had no effect on the incorporation into the isolated mitochondria at pH 7.2, despite of its stimulating effect on mitochondrial oxidative phosphorylation. SCL stimulated amino acid incorporation into the mitochondria at pH 6.1, and to some extent maintained the activity on that in mitochondria during aging in hypotonic Tris-HCl buffer (pH 7.2). Since SCL prevented leakage of amino acids from the mitochondria into these buffers, it was suggested that SCL may protect a structure of mitochondrial membrane which appeared to have a significance on transport of amino acids. In liver slices, SCL stimulated amino acid incorporation only into the extra-mitochondrial fraction for the first 3 min, but gradually turned to simulate incorporation into mitochondria within 30 min.

Effect of Phosphorus-32 Incorporated into Chick Embryo

Energy Technology Data Exchange (ETDEWEB)

Szabo, L. D.; Antoni, F.; Koeteles, G. J.; Holland, J.; Hidvegi, E. J.; Varteresz, V. [Frederic Joliot-Curie National Research Institute for Radiobiology and Radiohygiene, Budapest (Hungary)

1968-06-15

The bilogical effects of {sup 32}P on the viability and development of chick embryo were studied. 200,100 and 50 {mu}Ci per egg killed the embryos during incubation. Growth retardation preceded their death. 25 {mu}Ci per egg, however, did not cause mortality until hatching. An attempt was made to correlate the observed effects with the radiation dose and the number of {sup 32}P atoms incorporated into DNA and therefore, the frequencies of radiophosphorus atoms in the polynucleotide chains of DNA and RNA were determined under various conditions. Some biochemical consequences of the decay of {sup 32}P incorporated into ribonucleic acids were demonstrated. Structural changes of RNA were observed. Parallel with structural changes, functional alterations of various kinds of RNA molecules were demonstrated in isolated ribosomal systems. The decrease in protein synthesis by liver ribosomes was found to be proportional to the number of decayed intramolecular {sup 32}P atoms. The structural and functional changes of ribonucleic acids observed on molecular and sub-cellular levels could be attributed to nuclear transmutation of {sup 32}P. (author)

Delayed biological effects of incorporated sulfur-35 in combination with IOS-4876

International Nuclear Information System (INIS)

Rusanova, O.V.

1990-01-01

Comparative evaluation of some delayed effects of sulfur-35 single administration to mongree white rats males is carried out; modifying effect of IOS-4876 preparation on biological efficiency of incorporated sulfur-35 is also evaluated. Different radionuclide doses demonstrated identical tumor effect exceeding by 2.2-3 times the level of spontaneous tumors. Sulfur-35 incorporated in quantities of 185 and 925 kBq/g causes proved increase in rats death level during the first two years of observation. IOS-4876 preparation leads to certain decrease in the level of delayed biological effects due to internal irradiation. 11 refs

The effect of clay incorporation on the mechanical properties of fluoroelastomer

International Nuclear Information System (INIS)

Zen, Heloisa Augusto; Oliveira, Jonathan Pereira de; Lugao, Ademar Benevolo

2015-01-01

In this work was studied the effect of clay incorporation in the mechanical properties of fluoroelastomer (FKM). The polymer matrix that was used is a compound of the commercial terpolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene, with 70% of fluor content. This type of polymer is known for its resistance to high temperature and chemical products; it has low fuel permeation which allowing be used as sealant and especially as o-ring product. The incorporation of clay was carried to avoid excessive swelling and to observe the effect in the mechanical properties, for this application was used commercial clay, Cloisite® at 1 and 2% in weigh. The incorporation of clay into the FKM was carried out in a two roll cylinder. After that, the samples with and without clay loading were submitted to gamma radiation at 20 kGy in order to observe the changes in the polymer matrix. The characterization techniques used were: mechanical testes (stress - strain), rheometric properties and degree of swelling. After radiation process, was observed an increase in the swelling degree for the irradiated samples in relation to the pristine one. The incorporated samples with 1 and 2% of clay showed an increase in the elongation which can indicate a decrease in hardness of the polymer matrix. (author)

Bauschinger effect in thin metal films on compliant substrates

NARCIS (Netherlands)

Hoefnagels, J.P.M.; Vlassak, J.J.; Gdoutos, E.E.

2007-01-01

Flexible electronic devices such as flexible displays and solar cells draw more and more attention from the industry. In these devices, the functionality is delivered by small-scale structures consisting of thin metal lines and other materials that are integrated on a compliant (e.g. polymer)

Fatigue life prediction of autofrettage tubes using actual material behaviour

International Nuclear Information System (INIS)

Jahed, Hamid; Farshi, Behrooz; Hosseini, Mohammad

2006-01-01

There is a profound Bauschinger effect in the behaviour of high-strength steels used in autofrettaged tubes. This has led to development of methods capable of considering experimentally obtained (actual) material behaviour in residual stress calculations. The extension of these methods to life calculations is presented here. To estimate the life of autofrettaged tubes with a longitudinal surface crack emanating from the bore more accurately, instead of using idealized models, the experimental loading-unloading stress-strain behaviour is employed. The resulting stresses are then used to calculate stress intensity factors by the weight function method as input to fatigue life determination. Fatigue lives obtained using the actual material behaviour are then compared with the results of frequently used ideal models including those considering Bauschinger effect factors and strain hardening in unloading. Using standard fatigue crack growth relationships, life of the vessel is then calculated based on recommended initial and final crack length. It is shown that the life gain due to autofrettage above 70% overstrain is considerable

Incorporation of QCD effects in basic corrections of the electroweak theory

CERN Document Server

Fanchiotti, Sergio; Sirlin, Alberto; Fanchiotti, Sergio; Kniehl, Bernd; Sirlin, Alberto

1993-01-01

We study the incorporation of QCD effects in the basic electroweak corrections \\drcar, \\drcarw, and \\dr. They include perturbative \\Ord{\\alpha\\alpha_s} contributions and $t\\bar{t}$ threshold effects. The latter are studied in the resonance and Green-function approaches, in the framework of dispersion relations that automatically satisfy relevant Ward identities. Refinements in the treatment of the electroweak corrections, in both the \\ms\\ and the on-shell schemes of renormalization, are introduced, including the decoupling of the top quark in certain amplitudes, its effect on $\\hat{e}^2(\\mz)$ and \\sincarmz, the incorporation of recent results on the leading irreducible \\Ord{\\alpha^2} corrections, and simple expressions for the residual, i.e.\\ ``non-electromagnetic'', parts of \\drcar, \\drcarw, and \\dr. The results are used to obtain accurate values for \\mw\\ and \\sincarmz, as functions of \\mt\\ and \\mh. The higher-order effects induce shifts in these parameters comparable to the expected experimental accuracy, a...

The effects of Mg incorporation and annealing temperature on the ...

Indian Academy of Sciences (India)

Home; Journals; Pramana – Journal of Physics; Volume 88; Issue 2. The effects of Mg incorporation and annealing temperature on the physicochemical properties and antibacterial activity against {\\it Listeria monocytogenes} of ZnO nanoparticles. NIMA SHADAN ALI ABDOLAHZADEH ZIABARI RAFIEH MERAAT KAMYAR ...

Effect of organoclay incorporation on dental resin morphology

International Nuclear Information System (INIS)

Oliveira, Nadja M.S.; Reis, Romulo P.B.; Leite, Itamara F.; Morais, Crislene R.S.; Silva, Suedina M.L.

2009-01-01

The objective of the present work was to incorporate nanosilicates in commercial dental resins in order to prepare dental nanocomposites competitive as commercial nanoparticulates dental resins. Thus, a silicate, Cloisite 20A (C20A), was incorporated in a microhybrid dental resin (Z100) and morphological properties of the nanocomposites evaluated as a function of the incorporation method and the amount of filler employed. The samples were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD results evidence that nanocomposites have been obtained and according to SEM results, the morphology of microhybrid resin was modified when C20A nanoparticulate was incorporated improve the size distribution and reduce the agglomeration of the particles. (author)

EFFECT OF INCORPORATING EXPANDED POLYSTYRENE ...

African Journals Online (AJOL)

2012-11-03

Nov 3, 2012 ... Incorporating expanded polystyrene granules in concrete matrix can produce lightweight polystyrene aggregate concrete of ... structure. [1] reported that the standard workability tests are not suitable for the polystyrene aggregate concrete since they are sensitive to the unit weight of concrete. [2] made ...

On the evolution and modelling of lattice strains during the cyclic loading of TWIP steel

International Nuclear Information System (INIS)

Saleh, Ahmed A.; Pereloma, Elena V.; Clausen, Bjørn; Brown, Donald W.; Tomé, Carlos N.; Gazder, Azdiar A.

2013-01-01

The evolution of lattice strains in fully annealed Fe–24Mn–3Al–2Si–1Ni–0.06C twinning-induced plasticity (TWIP) steel is investigated via in situ neutron diffraction during cyclic (tension–compression) loading between strain limits of ±1%. The pronounced Bauschinger effect observed upon load reversal is accounted for by a combination of the intergranular residual stresses and the intragranular sources of back stress, such as dislocation pile-ups at the intersection of stacking faults. The recently modified elasto-plastic self-consistent (EPSC) model which empirically accounts for both intergranular and intragranular back stresses has been successfully used to simulate the macroscopic stress–strain response and the evolution of the lattice strains. The EPSC model captures the experimentally observed tension–compression asymmetry as it accounts for the directionality of twinning as well as Schmid factor considerations. For the strain limits used in this study, the EPSC model also predicts that the lower flow stress on reverse shear loading reported in earlier Bauschinger-type experiments on TWIP steel is a geometrical or loading path effect

The effect of insulin on amino acid incorporation into exocrine pancreatic cells of the rat

International Nuclear Information System (INIS)

Kramer, M.F.; Poort, C.

1975-01-01

The rate of incorporation of radioactive leucine per cell in the acinar pancreatic cells of the rat increases by 50 per cent within one hour after subcutaneous administration of insulin, an effect that lasts for at least one more hour. The rate of incorporation has been measured by quantitative radioautography and by determination of the radioactivity per μg DNA in TCA-precipitable material from tissue homogenates. The capacity for amino acid (leucine and lysine) incorporation as measured by incubating pancreatic fragments in vitro is not enhanced by insulin treatment of the rat in vivo during one or more hours. Insulin was found to lower the serum concentration of most amino acids significantly, leucine by 50 per cent. The apparent effect of insulin on the incorporation of radioactive leucine in vivo can be explained by the difference in the specific radioactivity of the circulating amino acid in the treated rats as compared to the untreated ones. A change in amino acid concentration in the serum may likewise be the explanation of the decrease in amino acid incorporation rate in alloxan diabetic rats. (orig./GSE) [de

A diffraction based study of the deformation mechanisms in anomalously ductile B2 intermetallics

Science.gov (United States)

Mulay, Rupalee Prashant

For many decades, the brittle nature of most intermetallic compounds (e.g. NiAl) has been the limiting factor in their practical application. Many B2 (CsCl prototypical structure) intermetallics are known to exhibit slip on the {110} slip mode, which provides only 3 independent slip systems and, hence, is unable to satisfy the von Mises (a.k.a. Taylor) criterion for polycrystalline ductility. As a result, inherent polycrystalline ductility is unexpected. Recent discovery of a number of ductile B2 intermetallics has raised questions about possible violation of the von Mises criterion by these alloys. These ductile intermetallic compounds are MR (metal (M) combined with a rare earth metal or group IV refractory metal (R)) alloys and are stoichiometric, ordered compounds. Single crystal slip trace analyses have only identified the presence of {011} or {010} slip systems. More than 100 other B2 MR compounds are known to exist and many of them have already been shown to be ductile (e.g., CuY, AgY, CuDy, CoZr, CoTi, etc.). Furthermore, these alloys exhibit a large Bauschinger effect. The present work uses several diffraction based techniques including electron back scattered diffraction (EBSD), X-ray diffraction (XRD) and in-situ neutron diffraction; in conjunction with scanning electron microscopy (SEM), transmission electron microscopy (TEM), mechanical testing, and crystal plasticity modeling, to elucidate the reason for ductility in select B2 alloys, explore the spread of this ductility over the B2 family, and understand the Bauschinger effect in these alloys. Several possible explanations (e.g., slip of dislocations, strong texture, phase transformations and twinning) for the anomalous ductility were explored. An X-ray diffraction based analysis ruled out texture, phase purity and departure from order as explanations for the anomalous ductility in MR alloys. In-situ neutron diffraction and post deformation SEM, EBSD, and TEM were unable to detect any evidence for

Behavior of thin-walled beams made of advanced composite materials and incorporating non-classical effects

Science.gov (United States)

Librescu, Liviu; Song, Ohseop

1991-11-01

Several results concerning the refined theory of thin-walled beams of arbitrary closed cross-section incorporating nonclassical effects are presented. These effects are related both with the exotic properties characterizing the advanced composite material structures and the nonuniform torsional model. A special case of the general equations is used to study several problems of cantilevered thin-walled beams and to assess the influence of the incorporated effects. The results presented in this paper could be useful toward a more rational design of aeronautical or aerospace constructions, as well as of helicopter or tilt rotor blades constructed of advanced composite materials.

Effect of inflammatory serum of 14C-glucosamine incorporation into bone marrow granulocytes in vitro

International Nuclear Information System (INIS)

Evans, W.H.; Wilson, S.M.; Torres, A.R.; Peterson, E.A.; Mage, M.G.

1979-01-01

As a preliminary approach to developing a biochemical assay for detecting humoral regulators of granulocyte maturation in the normal and inglammatory states, studies were carried out on the effects of normal inflammatory sera on the incorporation of 14 C-glucosamine into the glycoproteins of bone marrow granulocytes in vitro. We observed that, relative to normal serum, inflammatory serum had a marked stimulatory effect on 14 C-glucosamine incorporation into these glycoproteins. This property of inflammatory serum reached a maximum at about 8 h after the initiation of inflammation in vivo and preceded the maximum increase in the mitotic activity of granulocyte precursors in the marrow by 18 h. It was also found that normal serum contains both dialyzable and heat-sensitive nondialyzable factors that inhibit 14 C-glucosamine incorporation into bone marrow granulocytes in vitro. Data are presented which indicate that the stimulatory effect of inflammatory serum is most likely due to a nondialyzable factor which is capable of blocking the effect of the inhibitors present in normal serum. (author)

Effects of Straw Incorporation on Soil Nutrients, Enzymes, and Aggregate Stability in Tobacco Fields of China

Directory of Open Access Journals (Sweden)

Jiguang Zhang

2016-07-01

Full Text Available To determine the effects of straw incorporation on soil nutrients, enzyme activity, and aggregates in tobacco fields, we conducted experiments with different amounts of wheat and maize straw in Zhucheng area of southeast Shandong province for three years (2010–2012. In the final year of experiment (2012, straw incorporation increased soil organic carbon (SOC and related parameters, and improved soil enzyme activity proportionally with the amount of straw added, except for catalase when maize straw was used. And maize straw incorporation was more effective than wheat straw in the tobacco field. The percentage of aggregates >2 mm increased with straw incorporation when measured by either dry or wet sieving. The mean weight diameter (MWD and geometric mean diameter (GMD in straw incorporation treatments were higher than those in the no-straw control (CK. Maize straw increased soil aggregate stability more than wheat straw with the same incorporation amount. Alkaline phosphatase was significantly and negatively correlated with soil pH. Sucrase and urease were both significantly and positively correlated with soil alkali-hydrolysable N. Catalase was significantly but negatively correlated with soil extractable K (EK. The MWD and GMD by dry sieving had significantly positive correlations with SOC, total N, total K, and EK, but only significantly correlated with EK by wet sieving. Therefore, soil nutrients, metabolic enzyme activity, and aggregate stability might be increased by increasing the SOC content through the maize or wheat straw incorporation. Moreover, incorporation of maize straw at 7500 kg·hm−2 was the best choice to enhance soil fertility in the tobacco area of Eastern China.

Effects of 32 P incorporated in plasmid DNA: strand breaks and mutagenesis

International Nuclear Information System (INIS)

Fonseca, Adenilson de S. da; Felzenszwalb, Israel

1996-01-01

In order to study the 32 P decay effects in DNA, bacterial plasmid were labeled with different activities of the radioisotope in vivo: 1,2 and 6 x 10 5 Bk/ml of bacterial culture, leading to 1,2 and 6 x 10 3 Bk/μg of nucleic acid or in vitro: 0.7, 1.5 and 3.5 x 10 3 Bk/μg of nucleic acid, stored at -20 deg C and its electroforetic profiles, transformation capacity of wild type and DNA repair. E. coli mutants cells and mutagenesis, were followed during three months. The results achieved in this work suggest that: the decay of the incorporated 32 P in vivo is able to change the pBR322 electroforetic profile, we detected a decrease on the form III (super coiled) and increase on the form II (circular), indicating single strands breaks; the decay incorporated 32 in vitro does not modify the electrophoretic profile of pBR322, suggesting that in some way the effects of the radioactive decay of incorporated 32 P is dependent of the DNA topology, the damages induced by 32 P decay increase mutation frequency in pAC189 plasmids. MRF is increased by a factor of three after 6 t 1/2 of storage, indicating direct or indirect action through mismatch DNA repair pathway. (author)

Mutagenic effect of radionuclides incorporated into DNA of Drosophila melanogaster. Progress report, 1978-1979

International Nuclear Information System (INIS)

Lee, W.R.

1979-01-01

Current progress in studies on the mutagenic effect of 3 H incorporated into the DNA of Drosophila melanogaster is reported. It was shown that selected 3 H precursors incorporated into DNA are metabolized. The forms (metabolites) of tritium found in the DNA molecules and the mutation frequencies resulting therefrom were identified. An alcohol dehydrogenase system was developed for recovering mutations that is capable of distinguishing between base changes and chain breakage events that may lead to the formation of deletions

Ultraviolet irradiation effects incorporation of nitrate and nitrite nitrogen into aquatic natural organic matter

Science.gov (United States)

Thorn, Kevin A.; Cox, Larry G.

2012-01-01

One of the concerns regarding the safety and efficacy of ultraviolet radiation for treatment of drinking water and wastewater is the fate of nitrate, particularly its photolysis to nitrite. In this study, 15N NMR was used to establish for the first time that UV irradiation effects the incorporation of nitrate and nitrite nitrogen into aquatic natural organic matter (NOM). Irradiation of 15N-labeled nitrate in aqueous solution with an unfiltered medium pressure mercury lamp resulted in the incorporation of nitrogen into Suwannee River NOM (SRNOM) via nitrosation and other reactions over a range of pH from approximately 3.2 to 8.0, both in the presence and absence of bicarbonate, confirming photonitrosation of the NOM. The major forms of the incorporated label include nitrosophenol, oxime/nitro, pyridine, nitrile, and amide nitrogens. Natural organic matter also catalyzed the reduction of nitrate to ammonia on irradiation. The nitrosophenol and oxime/nitro nitrogens were found to be susceptible to photodegradation on further irradiation when nitrate was removed from the system. At pH 7.5, unfiltered irradiation resulted in the incorporation of 15N-labeled nitrite into SRNOM in the form of amide, nitrile, and pyridine nitrogen. In the presence of bicarbonate at pH 7.4, Pyrex filtered (cutoff below 290–300 nm) irradiation also effected incorporation of nitrite into SRNOM as amide nitrogen. We speculate that nitrosation of NOM from the UV irradiation of nitrate also leads to production of nitrogen gas and nitrous oxide, a process that may be termed photo-chemodenitrification. Irradiation of SRNOM alone resulted in transformation or loss of naturally abundant heterocyclic nitrogens.

[Incorporation monitoring of employees of a radioiodine therapy ward. Is incorporation monitoring required for routine?].

Science.gov (United States)

Happel, C; Kratzel, U; Selkinski, I; Bockisch, B; Etzel, M; Korkusuz, H; Sauter, B; Staudt, J; von Müller, F; Grünwald, F; Kranert, W T

2013-01-01

Aim of the study was to determine the annual incorporation of staff on a radioiodine therapy ward and the resulting annual effective dose (aed). Following the German incorporation guideline (gig), incorporation monitoring is not necessary for potential aed below 0.5 mSv/a. For aed > 0.5 mSv/a adherence to the 1 mSv dose limit must be verified. For doses > 1 mSv/a incorporation has to be monitored by the authority. Furthermore, the (131)I incorporation factor from the gig should be verified. To determine the actual work related incorporation, the (131)I activity concentration in urine samples (collection over 24 h) of 14 employees of different professions were examined over a period of 27 months. Measured activity concentrations were related to the individual time of exposure. A constant activity supply for at least three days was assumed. The mean annual effective doses were 2.4 · 10⁻¹ mSv/a (nursing staff; n = 3), 5.6 · 10⁻² mSv/a (cleaning staff; n = 2), 2.8 · 10⁻³ mSv/a (technical staff; n = 2) and 5.2 · 10⁻³ mSv/a (physicians; n = 7). All aed were below the dose limits of the gig. The calculated mean incorporation factors ranged from 3.0 · 10⁻⁸ for the nursing staff to 3.6 · 10⁻¹⁰ for the technical staff (cleaning staff: 7 · 10⁻⁹; physicians: 6.5 · 10⁻¹⁰) and were therefore well below the (131)I incorporation factor defined by the gig. To estimate the aed caused by incorporation of (131)I it has to be subdivided for the different requirements in the diverse fields of activity of the employees. Regarding those who spend most of their time nearby the patient an incorporation monitoring by the authority might be required. The (131)I incorporation factor from the guideline (10⁻⁶) can be reduced by a factor of 10. For (99m)Tc and (18)F an incorporation factor of 10⁻⁷ is accepted.

Incorporating network effects in a competitive electricity industry. An Australian perspective

International Nuclear Information System (INIS)

Outhred, H.; Kaye, J.

1996-01-01

The role of an electricity network in a competitive electricity industry is reviewed, the nation's experience with transmission pricing is discussed, and a 'Nodal Auction Model' for incorporating network effects in a competitive electricity industry is proposed. The model uses a computer-based auction procedure to address both the spatial issues associated with an electricity network and the temporal issues associated with operation scheduling. The objective is to provide a market framework that addresses both network effects and operation scheduling in a coordinated implementation of spot pricing theory. 12 refs

Effect of cadmium on lipid metabolism of brain. In vivo incorporation of labelled acetate into lipids

Energy Technology Data Exchange (ETDEWEB)

Gulati, S; Gill, K D; Nath, R

1987-01-01

The effect of early postnatal cadmium exposure on the in vivo incorporation of (1-/sup 14/C) sodium acetate into various lipid classes of the weanling rat brain was studied. A stimulated incorporation of the label was observed in total lipids, phospholipids, cholesterol, cerebrosides and sulphatides of the brain of Cd-exposed animals compared to controls.

Effects of incorporated straw on dye tracer infiltration

Science.gov (United States)

Kasteel, R.; Garnier, P.; Vachier, P.; Coquet, Y.

2003-04-01

Crop residue incorporation by conventional tillage increases the heterogeneity in the soil surface layer due to the soil tillage itself and to the presence of a zone with a high density of vegetal residues. The objective of this work was to quantify the effect of incorporated straw on the transport behaviour of the dye Brilliant Blue. We used an image analysis technique to calculate the Brilliant Blue concentration from the spectral signature (i.e. RGB values) using a calibration relationship. This method was already successfully applied in soils without organic matter and in this study we want to extend it to soils that contain fresh organic matter. The experiment took place in a loamy bare soil in the north of France at Mons-en-Chaussée in May, 2002. The soil was ploughed under dry conditions to 30 cm depth and straw was incorporated at the content of 10 Tonnes of C/ha. The infiltration experiment was carried out using an infiltrometer of 25 cm diameter at the head potential of -1 cm of water. First, water was infiltrated followed by the dye solution. The day after the infiltration, the soil was cut in horizontal sections of 50 times 50 cm. In total, 15 cross-section were photographed which were separated by a vertical distance of about 2 or 3 cm. Samples of soil and small pieces of straw were taken from the soil surface in order to measure the Brilliant Blue concentration for the calibration procedure. The volumetric water content and bulk density were measured with small cylindrical samples. After geometrical and illumination corrections of the images, we separated the soil from the straw and established a separate second-order polynomial calibration function for both relating the Brilliant Blue content to the spectral signature in each pixel. In this way we obtained spatially highly resolved concentration patterns of the dye tracer. The dye concentration distribution was found to be very heterogeneous in the soil at the local scale. In the plough layer, dye

Lethal Effect on Bacterium of Decay of Incorporated Radioactive Atoms (3H, 14C, 32P)

International Nuclear Information System (INIS)

Apelgot, Sonia

1968-01-01

The biological effect of decay of 3 H, 14 C and 32 P incorporated into a bacterium depends on the nature of the organic molecule labelled, on the position of the isotope within it and on the isotope itself. In sum, results obtained to date show that: The decay of 3 H atoms incorporated into certain macromolecules of a bacterium causes sterilization through ionization by the ß - particle emitted; transmutation is of negligible importance. This self-irradiation is comparable in effect with X-rays and is affected in a similar manner by the same factors: temperature, presence of a radioprotector, radiosensitivity of the strain. Decay of 14 C or 32 P atoms incorporated into bacterial DNA is lethal because of the transmutation effect; ionizations produced by emitted ß - particles may be disregarded. Survival curves for 32 P transmutations depend on the experimental conditions. Some of the results obtained with 32 P are similar to those obtained with X-rays, e.g. effects of temperature, radical capture and oxygen, while others are similar to those of u.v. light, e.g., effect of growth conditions. Comparative tests made with 32 P indicate that the recoil energy of transmutation is not the phenomenon responsible for the lethal effect observed. Comparison of the results obtained after X-irradiation or decay of 3 H or 32 P incorporated into the DNA of bacteria of the same strain of E. coli shows that the efficiency of a 32 P transmutation is about four times greater than that of an ionization produced at random within the same DNA. (author) [fr

Zn incorporation in CuInSe2: Particle size and strain effects on ...

Indian Academy of Sciences (India)

Administrator

Zn incorporation in CuInSe2: Particle size and strain effects on microstructural ... size as well as tensile strain. The calculated ... X-ray diffraction analysis of CuInSe2 samples reported in figure 2 ... To estimate qualitative information regarding ...

Physical metallurgy of titanium alloys

International Nuclear Information System (INIS)

Collings, E.W.

1988-01-01

Researches in electric, magnetic, thermophysical properties of titanium alloys in the wide range of temperatures (from helium upto elevated one), as well as stability of phases in alloys of different types are generalized. Fundamental description of physical properties of binary model alloys is given. Acoustic emission, shape memory and Bauschinger effects, pseudoelasticity, aging and other aspects of physical metallurgy of titanium alloys are considered

Theory of reversal nonisothermal elastic-plastic deformation

International Nuclear Information System (INIS)

Shorr, B.F.

1979-01-01

Considered is approximated theory of nonisothermal elastic-plastic deformation at arbitrary laws of loading, permitting to describe nonisothermal isotropic and anisotropic strengthening of the material, Bauschinger effect and different tempo of plastic deformation development over different directions of loading depending on the deformation prehistory. The comparison of the theory with the experimental data showed good coincidence and sufficient simplicity permits to use it in technical calcualtions

Effects of wheat straw incorporation on the availability of soil nutrients and enzyme activities in semiarid areas.

Directory of Open Access Journals (Sweden)

Ting Wei

Full Text Available Soil infertility is the main barrier to dryland agricultural production in China. To provide a basis for the establishment of a soil amelioration technical system for rainfed fields in the semiarid area of northwest China, we conducted a four-year (2007-2011 field experiment to determine the effects of wheat straw incorporation on the arid soil nutrient levels of cropland cultivated with winter wheat after different straw incorporation levels. Three wheat straw incorporation levels were tested (H: 9000 kg hm(-2, M: 6000 kg hm(-2, and L: 3000 kg hm(-2 and no straw incorporation was used as the control (CK. The levels of soil nutrients, soil organic carbon (SOC, soil labile organic carbon (LOC, and enzyme activities were analyzed each year after the wheat harvest. After straw incorporation for four years, the results showed that variable straw amounts had different effects on the soil fertility indices, where treatment H had the greatest effect. Compared with CK, the average soil available N, available P, available K, SOC, and LOC levels were higher in the 0-40 cm soil layers after straw incorporation treatments, i.e., 9.1-30.5%, 9.8-69.5%, 10.3-27.3%, 0.7-23.4%, and 44.4-49.4% higher, respectively. On average, the urease, phosphatase, and invertase levels in the 0-40 cm soil layers were 24.4-31.3%, 9.9-36.4%, and 42.9-65.3% higher, respectively. Higher yields coupled with higher nutrient contents were achieved with H, M and L compared with CK, where these treatments increased the crop yields by 26.75%, 21.51%, and 7.15%, respectively.

Effects of Incorporating Carboxymethyl Chitosan into PMMA Bone Cement Containing Methotrexate.

Directory of Open Access Journals (Sweden)

Bo-Ming Liu

Full Text Available Treatment of bone metastases usually includes surgical resection with local filling of methotrexate (MTX in polymethyl methacrylate (PMMA cement. We investigated whether incorporating carboxymethyl chitosan (CMCS in MTX-PMMA cement might overcome disadvantages associated with MTX. To determine the optimal CMCS+MTX concentration to suppress the viability of cancer cells, an integrated microfluidic chip culturing highly metastatic lung cancer cells (H460 was employed. The mechanical properties, microstructure, and MTX release of (CMCS+MTX-PMMA cement were evaluated respectively by universal mechanical testing machine, scanning electron microscopy (SEM, and incubation in simulated body fluid with subsequent HPLC-MS. Implants of MTX-PMMA and (CMCS+MTX-PMMA cement were evaluated in vivo in guinea pig femurs over time using spiral computed tomography with three-dimensional image reconstruction, and SEM at 6 months. Viability of H460 cells was significantly lowest after treatment with 57 μg/mL CMCS + 21 μg/mL MTX, which was thus used in subsequent experiments. Incorporation of 1.6% (w/w CMCS to MTX-PMMA significantly increased the bending modulus, bending strength, and compressive strength by 5, 2.8, and 5.2%, respectively, confirmed by improved microstructural homogeneity. Incorporation of CMCS delayed the time-to-plateau of MTX release by 2 days, but increased the fraction released at the plateau from 3.24% (MTX-PMMA to 5.34%. Relative to the controls, the (CMCS+MTX-PMMA implants integrated better with the host bone. SEM revealed pores in the cement of the (CMCS+MTX-PMMA implants that were not obvious in the controls. In conclusion, incorporation of CMCS in MTX-PMMA appears a feasible and effective modification for improving the anti-tumor properties of MTX-PMMA cement.

Incorporating the effect of ionic strength in free energy calculations using explicit ions

NARCIS (Netherlands)

Donnini, S; Mark, AE; Juffer, AH; Villa, Alessandra

2005-01-01

The incorporation of explicit ions to mimic the effect of ionic strength or to neutralize the overall charge on a system in free energy calculations using molecular dynamics simulations is investigated. The difference in the free energy of hydration between two triosephosphate isomerase inhibitors

Alcohol Treatment and Cognitive-Behavioral Therapy: Enhancing Effectiveness by Incorporating Spirituality and Religion

Science.gov (United States)

Hodge, David R.

2011-01-01

Cognitive-behavioral therapy (CBT) is an effective modality for the treatment of alcoholism. Given widespread interest in incorporating spirituality into professional treatment, this article orients practitioners to spiritually modified CBT, an approach that may enhance outcomes with some spiritually motivated clients. More specifically, by…

Effect of free cholesterol on incorporation of triolein in phospholipid bilayers

International Nuclear Information System (INIS)

Spooner, P.J.R.; Small, D.M.

1987-01-01

Triacylglycerols are the major substrates for lipolytic enzymes that act at the surface of emulsion-like particles such as triglyceride-rich lipoproteins, chylomicrons, and intracellular lipid droplets. This study examines the effect of cholesterol on the solubility of a triacylglycerol, triolein, in phospholipid surfaces. Solubilities of [carbonyl- 13 C] triolein in phospholipid bilayer vesicles containing between 0 and 50 mol % free cholesterol, prepared by cosonication, were measured by 13 C NMR. The carbonyl resonances from bilayer-incorporated triglyceride were shifted downfield in the 13 C NMR spectra from those corresponding to excess, nonincorporated material. This enabled solubilities to be determined directly from carbonyl peak intensities at most cholesterol concentration. The bilayer solubility of triolein was inversely proportional to the cholesterol/phospholipid mole ratio. In pure phospholipid vesicles the triolein solubility was 2.2 mol %. The triglyceride incorporation decreased to 1.1 mol % at a cholesterol/phospholipid mole ratio of 0.5, and at a mole ratio of 1.0 for the bilayer lipids, the triolein solubility was reduced to just 0.15 mol %. The effects of free cholesterol were more pronounced and progressive than observed previously on the bilayer solubility of cholestery oleate. As with cholesteryl oleate, they suggest that cholesterol also displaces solubilized triglyceride to deeper regions of the bilayer

Insulin and thyroxine effect on /sup 32/P incorporation in the phospholipids of chicken intestinal mucosa

Energy Technology Data Exchange (ETDEWEB)

Aleksandrov, S; Lazarov, J [Akademiya na Selskostopanskite Nauki, Sofia-Kostinbrod (Bulgaria). Inst. po Zhivotnovydstvo

1977-01-01

Trials were conducted with 56-day-old broiler chickens. The effect was followed up of insulin and alloxan as well as of L-thyroxine and 6-methylthiouracil on /sup 32/P incorporation in phospholipids of the duodenal mucosa. A segment of the duodenum was isolated and Na/sub 2/H/sup 32/PO/sub 4/ was introduced therein. The lipids were extracted from duodenal mucosa and the individual phospholipids were separated by means of thin layer chromatography on sillica gel-G. Radioactivity was determined of individual phospholipid fractions. Blood glucose level was studied in insulin and alloxan-treated chickens. The inference was drawn that insulin significantly enhances /sup 32/P incorporation in the phospholipids in broiler chicken duodenal mucosa. The drop in blood glucose in insulin-treated chickens is inversely proportional to /sup 32/ P inclusion in individual phospholipids of duodenal mucosa. L-thyroxine exerts positive effect in chickens concerning /sup 32/P incorporation in lecithin and lysolecithin, this effect being negative with respect to sphingomyelin, cephalin and cardiolipin. Thyroid gland inhibition by 6-methylthiouracil induces negligible decline in /sup 32/P inclusion.

Technical Note: Effect of Incorporating Expanded Polystyrene ...

African Journals Online (AJOL)

Incorporating expanded polystyrene granules in concrete matrix can produce lightweight polystyrene aggregate concrete of various densities. Workability which is an important property of concrete, aects the rate of placement and the degree of compaction of concrete. Inadequate compaction leads to reduction in both ...

Strain hardening and its relation to Bauschinger effects in oriented polymers

NARCIS (Netherlands)

Senden, D.J.A.; Dommelen, van J.A.W.; Govaert, L.E.

2010-01-01

The nature of strain hardening in glassy polymers is investigated by studying the mechan-ical response of oriented polycarbonate in uniaxial extension and compression. The yieldstress in extension is observed to increase strongly with pre-deformation, whereas it slightlydecreases in compression (the

Hair analysis for drugs of abuse. XIII. Effect of structural factors on incorporation of drugs into hair: the incorporation rates of amphetamine analogs.

Science.gov (United States)

Nakahara, Y; Kikura, R

1996-01-01

In order to clarify the incorporation mechanism of drugs from blood into hair, seven effects of structural factors on the incorporation rate (ICR) were studied using 32 amphetamine analogs: (1) effect of a straight chained N-alkyl group; (2) effect of benzene and furan ring at N-position; (3) effect of aliphatic and aromatic hydroxy groups; (4) effect of triple bond group at N-position; (5) effect of N-acyl group and ketone group; (6) effect of methylenedioxy and methoxy groups on benzene ring; and (7) comparison between phenyltertiarybutylamines and phenylisopropylamines. After shaving the back hair and i.p. administration of drugs to Dark-Agouti rats (5 mg/kg, 10 days, n = 3), the areas under the concentration versus time curve (AUCs) of drugs in the plasma and the concentrations in hair newly grown for 4 weeks were determined by gas chromatography-mass spectrometry. The ICRs represented by the ratios of hair concentrations to AUCs were compared with those of amphetamine (AP) and methamphetamine (MA). The ICRs of N-alkyl AP increased depending on the length of carbon branches from proton to propyl (C3 > C2 > C1 > H) at N-position. The compounds containing a benzene or furan ring at the N-position (benzphetamine, clobenzorex, norbenzphetamine, prenylamine, furfenorex, and norfurfenorex) had much higher ICRs than those of AP or MA, suggesting that a benzene or furan ring increases their ICRs. The ICRs of deprenyl, nordeprenyl, and fenproporex were significantly low, implying that triple bonds such as of a propargyl or cyano group serve as a negative factor for the ICRs. An ephedrine group (ephedrine, methylephedrine, phenylpropanolamine) showed slightly lower ICRs than the corresponding amphetamine group. However, a hydroxy group on benzene ring apparently decreased the ICRs. Methoxy and methylenedioxy groups on benzene ring distinctly increased their ICRs. The lack of basicity such as N-formyl MA, N-acetyl AP, and N-acetyl MA dramatically lowered their ICRs to

Effect of incorporation of pumpkin (Cucurbita moshchata) powder and guar gum on the rheological properties of wheat flour

OpenAIRE

Kundu, Himani; Grewal, Raj Bala; Goyal, Ankit; Upadhyay, Neelam; Prakash, Saurabh

2012-01-01

The present study was carried out to study the effect of incorporation of fibre rich pumpkin powder and guar gum on the farinographic characteristics of wheat flour. The flour and pumpkin powder were assessed for proximate composition, total dietary fibre, minerals and β-carotene. Pumpkin powder contained appreciable amount of fibre, minerals and β-carotene. The effects of incorporation of different levels of pumpkin powder and guar gum along with pumpkin powder on farinographic characteristi...

Are adverse effects incorporated in economic models? An initial review of current practice.

Science.gov (United States)

Craig, D; McDaid, C; Fonseca, T; Stock, C; Duffy, S; Woolacott, N

2009-12-01

To identify methodological research on the incorporation of adverse effects in economic models and to review current practice. Major electronic databases (Cochrane Methodology Register, Health Economic Evaluations Database, NHS Economic Evaluation Database, EconLit, EMBASE, Health Management Information Consortium, IDEAS, MEDLINE and Science Citation Index) were searched from inception to September 2007. Health technology assessment (HTA) reports commissioned by the National Institute for Health Research (NIHR) HTA programme and published between 2004 and 2007 were also reviewed. The reviews of methodological research on the inclusion of adverse effects in decision models and of current practice were carried out according to standard methods. Data were summarised in a narrative synthesis. Of the 719 potentially relevant references in the methodological research review, five met the inclusion criteria; however, they contained little information of direct relevance to the incorporation of adverse effects in models. Of the 194 HTA monographs published from 2004 to 2007, 80 were reviewed, covering a range of research and therapeutic areas. In total, 85% of the reports included adverse effects in the clinical effectiveness review and 54% of the decision models included adverse effects in the model; 49% included adverse effects in the clinical review and model. The link between adverse effects in the clinical review and model was generally weak; only 3/80 (manipulation. Of the models including adverse effects, 67% used a clinical adverse effects parameter, 79% used a cost of adverse effects parameter, 86% used one of these and 60% used both. Most models (83%) used utilities, but only two (2.5%) used solely utilities to incorporate adverse effects and were explicit that the utility captured relevant adverse effects; 53% of those models that included utilities derived them from patients on treatment and could therefore be interpreted as capturing adverse effects. In total

The effects of music therapy incorporated with applied behavior analysis verbal behavior approach for children with autism spectrum disorders.

Science.gov (United States)

Lim, Hayoung A; Draper, Ellary

2011-01-01

This study compared a common form of Applied Behavior Analysis Verbal Behavior (ABA VB) approach and music incorporated with ABA VB method as part of developmental speech-language training in the speech production of children with Autism Spectrum Disorders (ASD). This study explored how the perception of musical patterns incorporated in ABA VB operants impacted the production of speech in children with ASD. Participants were 22 children with ASD, age range 3 to 5 years, who were verbal or pre verbal with presence of immediate echolalia. They were randomly assigned a set of target words for each of the 3 training conditions: (a) music incorporated ABA VB, (b) speech (ABA VB) and (c) no-training. Results showed both music and speech trainings were effective for production of the four ABA verbal operants; however, the difference between music and speech training was not statistically different. Results also indicated that music incorporated ABA VB training was most effective in echoic production, and speech training was most effective in tact production. Music can be incorporated into the ABA VB training method, and musical stimuli can be used as successfully as ABA VB speech training to enhance the functional verbal production in children with ASD.

Insulin effect on [14C]-valine incorporation and its relation to hexokinase activity in developing brain

International Nuclear Information System (INIS)

Pal, N.; Bessman, S.P.

1988-01-01

Using minced brain cortex from fetal and postnatal rats, we studied the incorporation of [ 14 C]-valine into protein in the presence of insulin. We also assayed the particle bound and soluble hexokinase in these tissues. Insulin significantly stimulated the incorporation of [ 14 C]-valine into brain proteins from fetal stage upto 2 days of life. After this period the insulin effect was minimal, with no effect by day 5. The particle bound (40,000g pellet) brain hexokinase, on the other hand, remained low till about 2 days of life and then increased to almost adult level by 5 days. Our results show that there is an inverse relation between this anabolic effect of insulin and the particle bound hexokinase activity in the cortex of developing rat brain

The nature of delayed dream incorporation ('dream-lag effect'): Personally significant events persist, but not major daily activities or concerns.

Science.gov (United States)

Eichenlaub, Jean-Baptiste; van Rijn, Elaine; Phelan, Mairéad; Ryder, Larnia; Gaskell, M Gareth; Lewis, Penelope A; P Walker, Matthew; Blagrove, Mark

2018-04-22

Incorporation of details from waking life events into rapid eye movement (REM) sleep dreams has been found to be highest on the 2 nights after, and then 5-7 nights after, the event. These are termed, respectively, the day-residue and dream-lag effects. This study is the first to categorize types of waking life experiences and compare their incorporation into dreams across multiple successive nights. Thirty-eight participants completed a daily diary each evening and a dream diary each morning for 14 days. In the daily diary, three categories of experiences were reported: major daily activities (MDAs), personally significant events (PSEs) and major concerns (MCs). After the 14-day period each participant identified the correspondence between items in their daily diaries and subsequent dream reports. The day-residue and dream-lag effects were found for the incorporation of PSEs into dreams (effect sizes of .33 and .27, respectively), but only for participants (n = 19) who had a below-median total number of correspondences between daily diary items and dream reports (termed "low-incorporators" as opposed to "high-incorporators"). Neither the day-residue or dream-lag effects were found for MDAs or MCs. This U-shaped timescale of incorporation of events from daily life into dreams has been proposed to reflect REM sleep-dependent memory consolidation, possibly related to emotional memory processing. This study had a larger sample size of dreams than any dream-lag study hitherto with trained participants. Coupled with previous successful replications, there is thus substantial evidence supporting the dream-lag effect and further explorations of its mechanism, including its neural underpinnings, are warranted. © 2018 The Authors. Journal of Sleep Research published by John Wiley & Sons Ltd on behalf of European Sleep Research Society.

Bayesian road safety analysis: incorporation of past evidence and effect of hyper-prior choice.

Science.gov (United States)

Miranda-Moreno, Luis F; Heydari, Shahram; Lord, Dominique; Fu, Liping

2013-09-01

This paper aims to address two related issues when applying hierarchical Bayesian models for road safety analysis, namely: (a) how to incorporate available information from previous studies or past experiences in the (hyper) prior distributions for model parameters and (b) what are the potential benefits of incorporating past evidence on the results of a road safety analysis when working with scarce accident data (i.e., when calibrating models with crash datasets characterized by a very low average number of accidents and a small number of sites). A simulation framework was developed to evaluate the performance of alternative hyper-priors including informative and non-informative Gamma, Pareto, as well as Uniform distributions. Based on this simulation framework, different data scenarios (i.e., number of observations and years of data) were defined and tested using crash data collected at 3-legged rural intersections in California and crash data collected for rural 4-lane highway segments in Texas. This study shows how the accuracy of model parameter estimates (inverse dispersion parameter) is considerably improved when incorporating past evidence, in particular when working with the small number of observations and crash data with low mean. The results also illustrates that when the sample size (more than 100 sites) and the number of years of crash data is relatively large, neither the incorporation of past experience nor the choice of the hyper-prior distribution may affect the final results of a traffic safety analysis. As a potential solution to the problem of low sample mean and small sample size, this paper suggests some practical guidance on how to incorporate past evidence into informative hyper-priors. By combining evidence from past studies and data available, the model parameter estimates can significantly be improved. The effect of prior choice seems to be less important on the hotspot identification. The results show the benefits of incorporating prior

Incorporating TCNQ into thiophene-fused heptacene for n-channel field effect transistor

KAUST Repository

Ye, Qun

2012-06-01

Incorporation of electron-deficient tetracyanoquinodimethane (TCNQ) into electron-rich thiophene-fused heptacene was successfully achieved for the purpose of stabilizing longer acenes and generating new n-type organic semiconductors. The heptacene-TCNQ derivative 1 was found to have good stability and an expected electron transporting property. Electron mobility up to 0.01 cm 2 V -1 s -1 has been obtained for this novel material in solution processed organic field effect transistors. © 2012 American Chemical Society.

Phenomenological Analysis of the Kinematic Hardening of HSLA and IF Steels Using Reverse Simple Shear Tests

International Nuclear Information System (INIS)

Aouafi, A.; Bouvier, S.; Gasperini, M.; Lemoine, X.; Bouaziz, O.

2007-01-01

Reverse simple shear tests are used to analyse the Bauschinger effect and the evolution of the kinematic hardening for a wide range of equivalent von Mises strain [0.025 - 0.3]. This work is carried out on two high strength low-alloyed steels. In order to investigate the effect of the precipitates on the macroscopic behaviour, a ferritic mild steel is used as a reference. Different phenomenological descriptions of the back-stress tensor are examined in order to analyse their ability to describe the experimental behaviour

Dosimetry and effects of fetal irradiation from incorporated radionuclides

International Nuclear Information System (INIS)

Harrison, J.D.; Coffigny, H.; Henshaw, D.L.

1993-01-01

An important aspect of the assessment of risks from incorporated radionuclides is the possibility of intakes by pregnant women and in utero exposure of the developing fetus. The overall objective of the project is to provide experimental data for the development of dosimetric models and assessment of risk. Studies include measurements of 210 Po and 239/240 Pu in human fetal tissues and placentae, animal studies of the biokinetics of radionuclide transfer and effects. Animal biokinetic studies concentrate on comparing the uptake and distribution of Po-210, Pu-238 and Am-241 in rats and guinea pigs for different exposure conditions. The data are used, together with the human data, to develop dosimetric models. Objectives and results of the three contributions to the project for the reporting period are presented. (R.P.) 4 figs., 1 tab

Travelling wave solutions for the Richards equation incorporating non-equilibrium effects in the capillarity pressure

NARCIS (Netherlands)

van Duijn, C. J.; Mitra, K.; Pop, I. S.

2018-01-01

The Richards equation is a mathematical model for unsaturated flow through porous media. This paper considers an extension of the Richards equation, where non-equilibrium effects like hysteresis and dynamic capillarity are incorporated in the relationship that relates the water pressure and the

40 CFR 59.412 - Incorporations by reference.

Science.gov (United States)

2010-07-01

... Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants, incorporation by reference approved for § 59.401, Nuclear coating. (5) ASTM Method D 4082-89, Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants, incorporation...

Determining the Effectiveness of Incorporating Geographic Information Into Vehicle Performance Algorithms

Energy Technology Data Exchange (ETDEWEB)

Sera White

2012-04-01

This thesis presents a research study using one year of driving data obtained from plug-in hybrid electric vehicles (PHEV) located in Sacramento and San Francisco, California to determine the effectiveness of incorporating geographic information into vehicle performance algorithms. Sacramento and San Francisco were chosen because of the availability of high resolution (1/9 arc second) digital elevation data. First, I present a method for obtaining instantaneous road slope, given a latitude and longitude, and introduce its use into common driving intensity algorithms. I show that for trips characterized by >40m of net elevation change (from key on to key off), the use of instantaneous road slope significantly changes the results of driving intensity calculations. For trips exhibiting elevation loss, algorithms ignoring road slope overestimated driving intensity by as much as 211 Wh/mile, while for trips exhibiting elevation gain these algorithms underestimated driving intensity by as much as 333 Wh/mile. Second, I describe and test an algorithm that incorporates vehicle route type into computations of city and highway fuel economy. Route type was determined by intersecting trip GPS points with ESRI StreetMap road types and assigning each trip as either city or highway route type according to whichever road type comprised the largest distance traveled. The fuel economy results produced by the geographic classification were compared to the fuel economy results produced by algorithms that assign route type based on average speed or driving style. Most results were within 1 mile per gallon ({approx}3%) of one another; the largest difference was 1.4 miles per gallon for charge depleting highway trips. The methods for acquiring and using geographic data introduced in this thesis will enable other vehicle technology researchers to incorporate geographic data into their research problems.

A data-driven model for influenza transmission incorporating media effects.

Science.gov (United States)

Mitchell, Lewis; Ross, Joshua V

2016-10-01

Numerous studies have attempted to model the effect of mass media on the transmission of diseases such as influenza; however, quantitative data on media engagement has until recently been difficult to obtain. With the recent explosion of 'big data' coming from online social media and the like, large volumes of data on a population's engagement with mass media during an epidemic are becoming available to researchers. In this study, we combine an online dataset comprising millions of shared messages relating to influenza with traditional surveillance data on flu activity to suggest a functional form for the relationship between the two. Using this data, we present a simple deterministic model for influenza dynamics incorporating media effects, and show that such a model helps explain the dynamics of historical influenza outbreaks. Furthermore, through model selection we show that the proposed media function fits historical data better than other media functions proposed in earlier studies.

Effect of pumpkin powder incorporation on cooking and sensory parameters of pasta

Directory of Open Access Journals (Sweden)

Lucia Minarovičová

2017-01-01

Full Text Available Pasta is commonly consumed and low glycaemic cereal-based food with long shelf life, which is suitable food matrix for substitution with functional ingredients. Pumpkin powder can be considered as suitable component in pasta making. The effect of addition of pumpkin powder at different levels (5, 7.5, and 10% on wheat dough rheology, cooking quality of pasta as well as on sensory properties was evaluated. Pumpkin powder included: 6.1% moisture, 8.2%, protein, 0.7% crude fat, 2.3% ash, 27.4% total dietary fiber which is included soluble (10.2% and insoluble (17.2% dietary fiber. Farinograph properties of pumpkin powder incorporated dough showed increase in water absorption and dough development time while dough stability and mixing tolerance indes were decreased. It was also observed that addition of pumpkin powder significantly altered cooking quality of pasta. Generally, pasta incorporated with pumpkin powder had shorter optimal cooking time. The shortest optimal time (5.9 min was after addition of 10% of pumpkin powder compared with control pasta (7.0 min. From the results also concluded that addition of pumpkin powder significantly increased cooking loss. The highest cooking loss (6.6% was after addition 10% pumpkin powder. Furthermore it could be stated that incorporation of pumpkin powder in pasta increased water absorption of pasta from 181.0% (control to 211.2% (10% of pumpkin powder. From sensory evaluation resulted that pumpkin powder incorporated pasta were characterized by lower colour, flavor and grain taste. On the other hand vegetable taste and granular structure of pasta increased with higher addition level of pumpkin powder. Moreover, it was concluded that pasta with addition level 10% were the most acceptable for accesors. Normal 0 21 false false false EN-GB X-NONE X-NONE Normal 0 21 false false false EN-GB X-NONE X-NONE

Effect of iodide on glucose oxidation and 32P incorporation into phospholipids stimulated by different agents in dog thyroid slices

International Nuclear Information System (INIS)

Tseng, F.Y.; Rani, C.S.; Field, J.B.

1989-01-01

Since iodide (I-) inhibits TSH stimulation of cAMP formation, which mediates most of the effects of the hormone, it has been assumed that this accounts for the inhibitory action of iodide on the thyroid. However, TSH stimulation of 32P incorporation into phospholipids and stimulation of thyroid metabolism by other agonists, such as carbachol, phorbol esters, and ionophore A23187, is not cAMP mediated. The present studies examined the effect of iodide on stimulation of glucose oxidation and 32P incorporation into phospholipids by TSH and other agonists to determine if the inhibition of cAMP formation was responsible for the action of iodide. Preincubation of dog thyroid slices for 1 h with iodide (10(-4) M) inhibited TSH-, (Bu)2cAMP-, carbachol-, methylene blue-, 12-O-tetradecanoyl phorbol-13-acetate-, ionophore A23187-, prostaglandin E1-, and cholera toxin-stimulated glucose oxidation. I- also inhibited the stimulation by TSH, 12-O-tetradecanoyl phorbol-13-acetate, carbachol, and ionophore A23187 of 32P incorporation into phospholipids. The inhibition was similar whether iodide was added 2 h before or simultaneously with the agonist. I- itself sometimes stimulated basal glucose oxidation, but had no effect on basal 32P incorporation into phospholipids. The effects of iodide on basal and agonist-stimulated thyroid metabolism were blocked by methimazole (10(-3) M). When dog thyroid slices were preloaded with 32PO4 or [1-14C]glucose, the iodide inhibition of agonist stimulation disappeared, suggesting that the effect of iodide involves the transport process. In conclusion, I- inhibited stimulation of glucose oxidation and 32P incorporation into phospholipids by all agonists, indicating that the effect is independent of the cAMP system and that iodide autoregulation does not only involve this system. Oxidation and organification of iodide are necessary for the inhibition

Effect of antimony incorporation on the density, shape, and luminescence of InAs quantum dots

Science.gov (United States)

Chen, J. F.; Chiang, C. H.; Wu, Y. H.; Chang, L.; Chi, J. Y.

2008-07-01

This work investigates the surfactant effect on exposed and buried InAs quantum dots (QDs) by incorporating Sb into the QD layers with various Sb beam equivalent pressures (BEPs). Secondary ion mass spectroscopy shows the presence of Sb in the exposed and buried QD layers with the Sb intensity in the exposed layer substantially exceeding that in the buried layer. Incorporating Sb can reduce the density of the exposed QDs by more than two orders of magnitude. However, a high Sb BEP yields a surface morphology with a regular periodic structure of ellipsoid terraces. A good room-temperature photoluminescence (PL) at ˜1600 nm from the exposed QDs is observed, suggesting that the Sb incorporation probably improves the emission efficiency by reducing the surface recombination velocity at the surface of the exposed QDs. Increasing Sb BEP causes a blueshift of the emission from the exposed QDs due to a reduction in the dot height as suggested by atomic force microscopy. Increasing Sb BEP can also blueshift the ˜1300 nm emission from the buried QDs by decreasing the dot height. However, a high Sb BEP yields a quantum well-like PL feature formed by the clustering of the buried QDs into an undulated planar layer. These results indicate a marked Sb surfactant effect that can be used to control the density, shape, and luminescence of the exposed and buried QDs.

The effects of a self-esteem program incorporated into health and physical education classes.

Science.gov (United States)

Lai, Hsiang-Ru; Lu, Chang-Ming; Jwo, Jiunn-Chern; Lee, Pi-Hsia; Chou, Wei-Lun; Wen, Wan-Yu

2009-12-01

Self-esteem, a key construct of personality, influences thoughts, actions, and feelings. Adolescence is a critical stage to the development of self-esteem. Taiwan currently offers no self-esteem building curriculum in the public education system. Therefore, incorporating self-esteem-related teaching activities into the existing curriculum represents a feasible approach to enhance self-esteem in middle school students. This study aimed to explore the effects on junior high school students' self-esteem of a self-esteem program incorporated into the general health and physical education curriculum. A quasi-experimental research design was used, and 184 seventh-grade students at two junior high schools in Taipei City were randomly selected and separated into two groups. The experimental group received one 32-week self-esteem program incorporated into their regular health and physical education curriculum, which was administered in three 45-minute-session classes each week. The control group received the regular health and physical education with no specially designed elements. During the week before the intervention began and the week after its conclusion, each participant's global and academic, physical, social, and family self-esteem was assessed. Data were analyzed using analysis of covariance. For all participants, the experimental group was significantly superior to the control group in respect to physical self-esteem (p = .02). For girls, the experimental group was significantly superior to the control group in family self-esteem (p = .02). However, there was no significant difference between the two groups in terms of global self-esteem. This study provides preliminary evidence that incorporating self-esteem activities into the regular school health and physical education curriculum can result in minor effects in students' physical self-esteem and family self-esteem. Findings may provide teachers and school administrators with information to help them design

Effect of the Prodegradant-Additive Plastics Incorporated on the Polyethylene Recycling

Directory of Open Access Journals (Sweden)

Miguel Aldas

2018-01-01

Full Text Available The effect of degraded plastic with prodegradants on the polyethylene properties was studied. First, the mixture of low-density polyethylene (LDPE with 5 wt.% prodegradant (oxo-degradable additive was prepared by melt processing using a mixer chamber. Then, the degradation of the mixtures was evaluated by exposing the oxo-degradable LDPE in a Xenon arc chamber for 300 hours. The degraded material was characterized by infrared spectroscopy (FTIR assessing the carbonyl index and the hydroperoxide band. Then, different percentages of degraded material (1, 5, 10, 20, and 50 wt.% were incorporated into the neat LDPE. Mechanical and rheological tests were carried out to evaluate the recycling process of these blends. Also, the feasibility of the blends reprocessing was determined by analysing the melt flow index for each heating process and shear stress applied. It was evidenced that the increment of the content of the degraded material in the neat LDPE decreased the mechanical strength and the processability of blends due to the imminent thermal degradation. All the test results showed that the incorporation of degraded material causes a considerable reduction in the matrix properties during the reprocessing. Nevertheless, at low concentrations, the properties of the oxo-degradable LDPE–LDPE blends were found to be similar to the neat LDPE.

Nanocomposite scaffold fabrication by incorporating gold nanoparticles into biodegradable polymer matrix: Synthesis, characterization, and photothermal effect

Energy Technology Data Exchange (ETDEWEB)

Abdelrasoul, Gaser N.; Farkas, Balazs; Romano, Ilaria; Diaspro, Alberto; Beke, Szabolcs, E-mail: szabolcs.beke@iit.it

2015-11-01

Nanoparticle incorporation into scaffold materials is a valuable route to deliver various therapeutic agents, such as drug molecules or large biomolecules, proteins (e.g. DNA or RNA) into their targets. In particular, gold nanoparticles (Au NPs) with their low inherent toxicity, tunable stability and high surface area provide unique attributes facilitating new delivery strategies. A biodegradable, photocurable polymer resin, polypropylene fumarate (PPF) along with Au NPs were utilized to synthesize a hybrid nanocomposite resin, directly exploitable in stereolithography (SL) processes. To increase the particles' colloidal stability, the Au NP nanofillers were coated with polyvinyl pyrrolidone (PVP). The resulting resin was used to fabricate a new type of composite scaffold via mask projection excimer laser stereolithography. The thermal properties of the nanocomposite scaffolds were found to be sensitive to the concentration of NPs. The mechanical properties were augmented by the NPs up to 0.16 μM, though further increase in the concentration led to a gradual decrease. Au NP incorporation rendered the biopolymer scaffolds photosensitive, i.e. the presence of Au NPs enhanced the optical absorption of the scaffolds as well, leading to possible localized temperature rise when irradiated with 532 nm laser, known as the photothermal effect. - Highlights: • Gold nanoparticle incorporation into biopolymer resin was realized. • Gold incorporation into biopolymer resin is a big step in tissue engineering. • Composite scaffolds were synthesized and thoroughly characterized. • Gold nanoparticles are remarkable candidates to be utilized as “transport vehicles”. • The photothermal effect was demonstrated using a 532-nm laser.

Effects of nanosilver and nanozinc incorporated mesoporous calcium-silicate nanoparticles on the mechanical properties of dentin.

Directory of Open Access Journals (Sweden)

Jie Zhu

Full Text Available Mesoporous calcium-silicate nanoparticles (MCSNs are advanced biomaterials for drug delivery and mineralization induction. They can load silver and exhibit significantly antibacterial effects. However, the effects of MCSNs and silver-loaded MCSNs on dentin are unknown. The silver (Ag and/or zinc (Zn incorporated MCSNs (Ag-Zn-MCSNs were prepared by a template method, and their characterizations were tested. Then the nanoparticles were filled into root canals and their effects on the dentin were investigated. Ag-Zn-MCSNs showed characteristics of mesoporous materials and sustained release of ions over time. Ag-Zn-MCSNs adhered well to the root canal walls and infiltrated into the dentinal tubules after ultrasound activation. Ag-Zn-MCSNs showed no significantly negative effects on either the flexural strength or the modulus of elasticity of dentin, while CH decreased the flexural strength of dentin significantly (P<0.05. These findings suggested that Ag and Zn can be incorporated into MCSNs using a template method, and the Ag-Zn-MCSNs may be developed into a new disinfectant for the root canal and dentinal tubules.

Macro and intergranular stress responses of austenitic stainless steel to 90° strain path changes

International Nuclear Information System (INIS)

Gonzalez, D.; Kelleher, J.F.; Quinta da Fonseca, J.; Withers, P.J.

2012-01-01

Highlights: ► We measure and model the macro and IG stresses of ASS to 90° strain path changes. ► The macro stress–strain curves show a clear Bauschinger effect on reloading. ► This is only partially captured by the model. ► The measured {h k l} families show an earlier microyield than predicted. ► This difference is more noticeable for a strain path with a higher reversibility. - Abstract: Strain path history can play a crucial role in sensitising/desensitising metals to various damage mechanisms and yet little work has been done to quantify and understand how intergranular strains change upon path changes, or their effect on the macroscopic behaviour. Here we have measured, by neutron diffraction, and modelled, by crystal plasticity finite elements, the stress–strain responses of 316L stainless steel over three different 90° strain path changes using an assembled microstructure of randomly oriented crystallites. The measurements show a clear Bauschinger effect on reloading that is only partially captured by the model. Further, measurements of the elastic response of different {h k l} grain families revealed an even earlier onset of yield for strain paths reloaded in compression while a strain path reloaded in tension showed good agreement with corresponding predictions. Finally, we propose that the study of strain path effects provides a more rigorous test of crystal plasticity models than conventional in situ diffraction studies of uniaxial loading.

Incorporating partial shining effects in proton pencil-beam dose calculation

International Nuclear Information System (INIS)

Li Yupeng; Zhang Xiaodong; Lii Mingfwu; Sahoo, Narayan; Zhu, Ron X; Gillin, Michael; Mohan, Radhe

2008-01-01

A range modulator wheel (RMW) is an essential component in passively scattered proton therapy. We have observed that a proton beam spot may shine on multiple steps of the RMW. Proton dose calculation algorithms normally do not consider the partial shining effect, and thus overestimate the dose at the proximal shoulder of spread-out Bragg peak (SOBP) compared with the measurement. If the SOBP is adjusted to better fit the plateau region, the entrance dose is likely to be underestimated. In this work, we developed an algorithm that can be used to model this effect and to allow for dose calculations that better fit the measured SOBP. First, a set of apparent modulator weights was calculated without considering partial shining. Next, protons spilled from the accelerator reaching the modulator wheel were simplified as a circular spot of uniform intensity. A weight-splitting process was then performed to generate a set of effective modulator weights with the partial shining effect incorporated. The SOBPs of eight options, which are used to label different combinations of proton-beam energy and scattering devices, were calculated with the generated effective weights. Our algorithm fitted the measured SOBP at the proximal and entrance regions much better than the ones without considering partial shining effect for all SOBPs of the eight options. In a prostate patient, we found that dose calculation without considering partial shining effect underestimated the femoral head and skin dose

Oxygen incorporation effects in annealed epitaxial La(1-x)SrxMnO3 thin films

International Nuclear Information System (INIS)

Petrisor, T.; Gabor, M. S.; Tiusan, C.; Boulle, A.; Bellouard, C.; Pana, O.; Petrisor, T.

2011-01-01

This paper presents our results regarding oxygen incorporation effects in epitaxial La (1-x) Sr x MnO 3 thin films, deposited on SrTiO 3 (001) single crystal substrates, by annealing in different gas mixtures of argon and oxygen. A particular emphasis is placed on the correlation of structural properties with the magnetic properties of the films, Curie temperature, and coercive field. In this sense, we demonstrate that the evolution of the diffuse part of the ω-scans performed on the films are due to oxygen excess in the film lattice, which creates cationic vacancies within the films. Also, we show that two regimes of oxygen incorporation in the films exist, one in which the films evolve toward a single phase and oxygen stoichiometry is recovered, and a second one dominated by oxygen over-doping effects. In order to support our study, XPS measurements were performed, from which we have evaluated the Mn 3+ /Mn 4+ ionic ratio.

Effect of Zinc Incorporation on the Performance of Red Light Emitting InP Core Nanocrystals.

Science.gov (United States)

Xi, Lifei; Cho, Deok-Yong; Besmehn, Astrid; Duchamp, Martial; Grützmacher, Detlev; Lam, Yeng Ming; Kardynał, Beata E

2016-09-06

This report presents a systematic study on the effect of zinc (Zn) carboxylate precursor on the structural and optical properties of red light emitting InP nanocrystals (NCs). NC cores were assessed using X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), energy-dispersive X-ray spectroscopy (EDX), and high-resolution transmission electron microscopy (HRTEM). When moderate Zn:In ratios in the reaction pot were used, the incorporation of Zn in InP was insufficient to change the crystal structure or band gap of the NCs, but photoluminescence quantum yield (PLQY) increased dramatically compared with pure InP NCs. Zn was found to incorporate mostly in the phosphate layer on the NCs. PL, PLQY, and time-resolved PL (TRPL) show that Zn carboxylates added to the precursors during NC cores facilitate the synthesis of high-quality InP NCs by suppressing nonradiative and sub-band-gap recombination, and the effect is visible also after a ZnS shell is grown on the cores.

The effect of zinc and phytic acid on the incorporation of 1-14C-acetate into aflatoxin by resting mycelia of Aspergillus parasiticus

International Nuclear Information System (INIS)

Gupta, S.K.; Venkitasubramanian, T.A.

1975-01-01

The effect of zinc and phytic acid on [1- 14 C]-acetate incorporation into aflatoxins by resting mycelium was studied. When different levels of ZnSO 4 were used to study its effect on the incorporation of [1- 14 C]-acetate into aflatoxins, it was found that the specific radioactivity incorporation into aflatoxins was maximum at the level of 10 mM-ZnSO 4 . At this concentration the change in the specific radioactivities of aflatoxins B 1 + B 2 and aflatoxins G 1 + G 2 were +74.61% and +29.66%, respectively. On the other hand, phytic acid had an inhibitory effect on the incorporation of [1- 14 C]-acetate. These observations have been correlated in order to find out why soyabean is unable to produce aflatoxins by Aspergillus parasiticus. (orig.) [de

Influence of anisotropic hardening on longitudinal welding strains and stresses

International Nuclear Information System (INIS)

Gatovskij, K.M.; Revutskij, M.N.

1981-01-01

The algorithm and program for estimation of longitudinal welding strains and stresses with account of hardening and Bauschinger effect, which expand the possibilities of more complete description of stress change during thermodeformation welding cycles at bead surfacing on plate made of the 06Kh18N9T steel and AMg61 alloy. It is shown that for metals, deformation curves which are characterized by considerable yield moduli (Esub(T)/E>=0.05) hardening effect is considerable and its account leads to the decrease of stress level in the heataffected zone (down to 20%) [ru

Radiological accidents: methodologies of radio nuclides dis incorporation

International Nuclear Information System (INIS)

Jimenez F, E. A.; Paredes G, L.; Cortes, A.

2014-08-01

Derived of the radioactive or nuclear material management, exists the risk that accidents can happen where people cases are presented with internal radioactive contamination, who will receive specialized medical care to accelerate the radioactive dis incorporation with the purpose of diminishing the absorbed dose and the associate biological effects. In this work treatments of radioactive dis incorporation were identified, in function of the radionuclide, radiation type, radioactive half life, biological half life, critical organ, ingestion duct and patient type. The factor time is decisive for the effectiveness of the selected treatment in the blockade stage (before the accident) or dis incorporation (after the accident); this factor is related with the radioactive and biological half lives. So to achieve dis incorporation efficiencies of more to 70%, the patient clinical treatment will begin before the first third of the biological half life of the radionuclide that generated the internal contamination. (Author)

Analysis of Potential for Titanium Liner Buckling after Proof in a Large Kevlar/Epoxy COPV

Science.gov (United States)

Phoenix, S. Leigh; Kezirian, Michael T.

2009-01-01

We analyze the potential for liner buckling in a 40-in Kevlar49/epoxy overwrapped spherical pressure vessel (COPV) due to long, local depressions or valleys in the titanium liner, which appeared after proof testing (autofrettage). We begin by presenting the geometric characteristics of approximately 20 mil (0.02 in.) deep depressions measured by laser profilometry in several vessels. While such depths were more typical, depths of more than 40 mils (0.02 in.) were seen near the equator in one particular vessel. Such depressions are largely the result of overlap of the edges of overwrap bands (with rectangular cross-section prepreg tows) from the first or second wrap patterns particularly where they start and end. We then discuss the physical mechanisms of formation of the depressions during the autofrettage process in terms of uneven void compaction in the overwrap around the tow overlap lines and the resulting 10-fold increase in through-thickness stiffness of the overwrap. We consider the effects of liner plastic yielding mechanisms in the liner on residual bending moments and interface pressures with the overwrap both at the peak proof pressure (approx.6500 psi) and when reducing the pressure to 0 psi. During depressurization the Bauschinger phenomenon becomes very important whereby extensive yielding in tension reduces the magnitude of the yield threshold in compression by 30 to 40%, compared to the virgin annealed state of the liner titanium. In the absence of a depression, the liner is elastically stable in compression even at liner overwrap interface pressures nominally 6 times the approx. 1000 psi interface pressure that exists at 0 psi. Using a model based on a plate-on-an-elastic-foundation, we develop an extensive analysis of the possible destabilizing effects of a frozen-in valley. The analysis treats the modifying effects of the residual bending moments and interface pressures remaining after the proof hold as well as the Bauschinger effect on the

Unraveling the photovoltaic technology learning curve by incorporation of input price changes and scale effects

International Nuclear Information System (INIS)

Yu, C.F.; van Sark, W.G.J.H.M.; Alsema, E.A.

2011-01-01

In a large number of energy models, the use of learning curves for estimating technological improvements has become popular. This is based on the assumption that technological development can be monitored by following cost development as a function of market size. However, recent data show that in some stages of photovoltaic technology (PV) production, the market price of PV modules stabilizes even though the cumulative capacity increases. This implies that no technological improvement takes place in these periods: the cost predicted by the learning curve in the PV study is lower than the market one. We propose that this bias results from ignoring the effects of input prices and scale effects, and that incorporating the input prices and scale effects into the learning curve theory is an important issue in making cost predictions more reliable. In this paper, a methodology is described to incorporate the scale and input-prices effect as the additional variables into the one factor learning curve, which leads to the definition of the multi-factor learning curve. This multi-factor learning curve is not only derived from economic theories, but also supported by an empirical study. The results clearly show that input prices and scale effects are to be included, and that, although market prices are stabilizing, learning is still taking place. (author)

Incorporation of zinc oxide nanoparticles into chitosan-collagen 3D porous scaffolds: Effect on morphology, mechanical properties and cytocompatibility of 3D porous scaffolds.

Science.gov (United States)

Ullah, Saleem; Zainol, Ismail; Idrus, Ruszymah Hj

2017-11-01

The zinc oxide nanoparticles (particles size chitosan-collagen 3D porous scaffolds and investigated the effect of zinc oxide nanoparticles incorporation on microstructure, mechanical properties, biodegradation and cytocompatibility of 3D porous scaffolds. The 0.5%, 1.0%, 2.0% and 4.0% zinc oxide nanoparticles chitosan-collagen 3D porous scaffolds were fabricated via freeze-drying technique. The zinc oxide nanoparticles incorporation effects consisting in chitosan-collagen 3D porous scaffolds were investigated by mechanical and swelling tests, and effect on the morphology of scaffolds examined microscopically. The biodegradation and cytocompatibility tests were used to investigate the effects of zinc oxide nanoparticles incorporation on the ability of scaffolds to use for tissue engineering application. The mean pore size and swelling ratio of scaffolds were decreased upon incorporation of zinc oxide nanoparticles however, the porosity, tensile modulus and biodegradation rate were increased upon incorporation of zinc oxide nanoparticles. In vitro culture of human fibroblasts and keratinocytes showed that the zinc oxide nanoparticles facilitated cell adhesion, proliferation and infiltration of chitosan-collagen 3D porous scaffolds. It was found that the zinc oxide nanoparticles incorporation enhanced porosity, tensile modulus and cytocompatibility of chitosan-collagen 3D porous scaffolds. Copyright © 2017 Elsevier B.V. All rights reserved.

Nonlinear free vibration of piezoelectric nanobeams incorporating surface effects

International Nuclear Information System (INIS)

Hosseini-Hashemi, Shahrokh; Nahas, Iman; Fakher, Mahmood; Nazemnezhad, Reza

2014-01-01

In this study, the nonlinear free vibration of piezoelectric nanobeams incorporating surface effects (surface elasticity, surface tension, and surface density) is studied. The governing equation of the piezoelectric nanobeam is derived within the framework of Euler–Bernoulli beam theory with the von Kármán geometric nonlinearity. In order to satisfy the balance conditions between the nanobeam bulk and its surfaces, the component of the bulk stress, σ zz , is assumed to vary linearly through the nanobeam thickness. An exact solution is obtained for the natural frequencies of a simply supported piezoelectric nanobeam in terms of the Jacobi elliptic functions using the free vibration mode shape of the corresponding linear problem. Then, the influences of the surface effects and the piezoelectric field on the nonlinear free vibration of nanobeams made of aluminum and silicon with positive and negative surface elasticity, respectively, have been studied for various properties of the piezoelectric field, various nanobeam sizes and amplitude ratios. It is observed that if the Young’s modulus of a nanobeam is lower, the effect of the piezoelectric field on the frequency ratios (FRs) of the nanobeam will be greater. In addition, it is seen that by increasing the nanobeam length so that the nanobeam cross section is set to be constant, the surface effects and the piezoelectric field with negative voltage values increases the FRs, whereas it is the other way around when the nanobeam cross section is assumed to be dependent on the length of the nanobeam. (paper)

Incorporating social justice and stigma in cost-effectiveness analysis: drug-resistant tuberculosis treatment.

Science.gov (United States)

Zwerling, A; Dowdy, D; von Delft, A; Taylor, H; Merritt, M W

2017-11-01

Novel therapies for multidrug-resistant tuberculosis (MDR-TB) are likely to be expensive. The cost of novel drugs (e.g., bedaquiline, delamanid) may be so prohibitively high that a traditional cost-effectiveness analysis (CEA) would rate regimens containing these drugs as not cost-effective. Traditional CEA may not appropriately account for considerations of social justice, and may put the most disadvantaged populations at greater risk. Using the example of novel drug regimens for MDR-TB, we propose a novel methodology, 'justice-enhanced CEA', and demonstrate how such an approach can simultaneously assess social justice impacts alongside traditional cost-effectiveness ratios. Justice-enhanced CEA, as we envision it, is performed in three steps: 1) systematic data collection about patients' lived experiences, 2) use of empirical findings to inform social justice assessments, and 3) incorporation of data-informed social justice assessments into a decision analytic framework that includes traditional CEA. These components are organized around a core framework of social justice developed by Bailey et al. to compare impacts on disadvantage not otherwise captured by CEA. Formal social justice assessments can produce three composite levels: 'expected not to worsen…', 'may worsen…', and 'expected to worsen clustering of disadvantage'. Levels of social justice impact would be assessed for each major type of outcome under each policy scenario compared. Social justice assessments are then overlaid side-by-side with cost-effectiveness assessments corresponding to each branch pathway on the decision tree. In conclusion, we present a 'justice-enhanced' framework that enables the incorporation of social justice concerns into traditional CEA for the evaluation of new regimens for MDR-TB.

Effect of blood serum from irradiated mice on the incorporation of DNA, RNA and protein precursor in L929 cells

International Nuclear Information System (INIS)

Muehlensiepen, H.; Porschen, W.; Feinendegen, L.E.

1983-01-01

Serum from whole-body irradiated mice inhibits incorporation of DNA precursors into DNA of L929 cells in culture in a dose-dependent way. The humoral factor interfering with the incorporation of 3 H-thymidine and 125 I-iododeoxyuridine is identical to thymidine. The degree of depression of 125 I-iododeoxyuridine-uptake is more sensitive than that of 3 H-thymidine. Irradiation of donor mice does not confer a toxic effect of blood serum on cell growth in culture. Incorporation of 3 H-leucine into protein and 3 H-cytidine into DNA and RNA is not affected by the serum of irradiated mice; there is no effect on the incorporation of 3 H-cytidine from the intracellular precursor pool into DNA or RNA either. The present findings demonstrate the specificity and high sensitivity of the assay system for measuring thymidine concentration in mouse blood serum and point to possible applications of analysing abnormalities in DNA metabolism resulting in, or from, disturbances of the thymidine reutilization pathway. (orig.) [de

Mutagenic effect of radionuclides incorporated into DNA of Drosophila melanogaster. Progress report, 1975--1976

International Nuclear Information System (INIS)

Lee, W.R.

1976-01-01

Progress is reported on research in the following areas: determination of mutagenic effects of tritium incorporated into DNA using 32 P, 33 P, and 14 C; dosimetry studies using number of disintegrations per minute per sperm cell; effect of the 5-position of the label of the cytosine moiety on mutation frequency; distribution of labeled thymine and comparison with labeled cytosine and a non-DNA labeled arginine-rich protein; detection of temperature sensitive mutants; induction of mosaics by x radiation; and methods for determining quantitatively the location of tritium in the deoxycytidine moiety

Effect of incorporation of pumpkin (Cucurbita moshchata) powder and guar gum on the rheological properties of wheat flour.

Science.gov (United States)

Kundu, Himani; Grewal, Raj Bala; Goyal, Ankit; Upadhyay, Neelam; Prakash, Saurabh

2014-10-01

The present study was carried out to study the effect of incorporation of fibre rich pumpkin powder and guar gum on the farinographic characteristics of wheat flour. The flour and pumpkin powder were assessed for proximate composition, total dietary fibre, minerals and β-carotene. Pumpkin powder contained appreciable amount of fibre, minerals and β-carotene. The effects of incorporation of different levels of pumpkin powder and guar gum along with pumpkin powder on farinographic characteristics were studied. Dough development time, dough stability, time to break down and farinograph quality number increased whereas mixing tolerance index decreased with incorporation of pumpkin powder (> 5 %) and guar gum (1.0 and 1.5 %) along with pumpkin powder in the flour. Resistance to extension as well as extensibility of dough prepared increased significantly by adding pumpkin powder (5-15 %) whereas increase in resistance to extension only was noticed with inclusion of guar gum (0.5-1.5 %) to flour containing 5 % pumpkin powder. Results indicated that pumpkin can be processed to powder that can be utilized with guar gum for value addition.

Effectiveness of reinforcement incorporation and mechanical properties of composites produced from rheocast slurries

Energy Technology Data Exchange (ETDEWEB)

Robert, M.H.; Galvao da Silveira Mussi, R. [Faculty of Mechanical Engineering, State Univ. of Campinas, Cidade Univ. (Brazil)

2002-07-01

The influence of compocasting variables (SiC size and %vol, additions of grain refiner and extra Mg) in the quality of A356+SiCp MMCs is investigated. In all conditions microstructures show Al-{alpha} with globular morphology with eutectic and SiC in interglobular regions. Results show tendency of agglomeration of thinner particles, jeopardising their incorporation and dispersion in the matrix; high quantities of SiC are not incorporated into rheocast slurries with refined globules, grain refinement decreases incorporation of bigger particles. Extra Mg does not influence incorporation. Best results are obtained for 15% vol of 30 {mu}m SiC added to grain refined matrix. Mechanical properties are poor when agglomeration of particles is present. (orig.)

Effect of incorporation of amaranth on the physical properties and nutritional value of cheese bread

Directory of Open Access Journals (Sweden)

Andréa dos Reis Lemos

2012-09-01

Full Text Available At the present celiac disease has no known cure, and its only treatment is a strict lifelong adherence to a gluten-free diet. Cheese bread is a traditional Brazilian product and a safe option for celiacs. However, like other gluten-free breads, it has inherent low levels of fibers and minerals. The objective of this study was to evaluate the effect of incorporation of whole amaranth flour on the physical properties and nutritional value of cheese bread. Amaranth flour was incorporated at 10, 15, and 20% proportions in different formulations. The increasing amaranth levels darkened the product, reduced specific volume, and increased compression force. Ten percent amaranth-content cheese breads exhibited slight differences in physical properties compared with the controls. These results demonstrated the possibility of incorporating 10% of whole amaranth flour in the formulation of cheese bread resulting in a product with higher dietary fiber and iron contents and the same level of acceptance as that of the conventional formulation. The aim of this approach is to increase the availability of gluten-free bakery products with added nutritional value contributing to increase the variety of the diet of celiac patients.

Comparison of effectiveness of four chelating agents in removing incorporated sup 241 Am

Energy Technology Data Exchange (ETDEWEB)

Mingyue, Lun; Yumin, Wang; Zhikang, Wei [Ministry of Nuclear Industry, Taiyuan, SX (China). Inst. of Radiation Protection; and others

1988-02-01

The effectiveness of four chelating agents (Ca-DTPA, Zn-DTPA, quinamic acid and H-73-10) in removing incorporated {sup 241}Am was studied on 200 rats. The results show that Ca-DTPA and Zn-DTPA are more effective than the others. They decreased the {sup 241}Am contents in the rat liver and skeleton down to only about 5 and 10 per cent of the control values, respectively. Quinamic acid has the same effectiveness in reducing the {sup 241}Am contents in the rat skeleton and liver as that of DTPA, but it leads to the cumulation of {sup 241}Am in the kidney, i. e., the {sup 241}Am content in the kidney is even higher than that in control rats. Although H-73-10 can remove {sup 241}Am from the rat organs, it is much less effective than DTPA.

Activity incorporation into zinc doped PWR oxides

International Nuclear Information System (INIS)

Maekelae, Kari

1998-01-01

Activity incorporation into the oxide layers of PWR primary circuit constructional materials has been studied in Halden since 1993. The first zinc injection tests showed that zinc addition resulted in thinner oxide layers on new metal surfaces and reduced further incorporation of activity into already existing oxides. These tests were continued to find out the effects of previous zinc additions on the pickup of activity onto the surface oxides which were subsequently exposed to zinc-free coolant. The results showed that previous zinc addition will continue to reduce the rate of Co-60 build-up on out-of-core surfaces in subsequent exposure to zinc-free coolants. However, the previous Zn free test was performed for a relatively short period of time and the water chemistry programme was continued to find out the long term effects for extended periods without zinc. The activity incorporation into the stainless steel oxides started to increase as soon as zinc dosing to the coolant was stopped. The Co-60 concentration was lowest on all of the coupons which were first oxidised in Zn containing primary coolant. After the zinc injection period the thickness of the oxides increased, but activity in the oxide films did not increase at the same rate. This could indicate that zinc in the oxide blocks the adsorption sites for Co-60 incorporation. The Co-60 incorporation rate into the oxides on Inconel 600 seemed to be linear whether the oxide was pre-oxidised with or without Zn. The results indicate that zinc can either replace or prevent cobalt transport in the oxides. The results show that for zinc injection to be effective it should be carried out continuously. Furthermore the actual mechanism by which Zn inhibits the activity incorporation into the oxides is still not clear. Therefore, additional work has to follow with specified materials to verify the conclusions drawn in this work. (author)

Incorporation of fluconazole in copolymer PMMA-g-PEG derivatives

International Nuclear Information System (INIS)

Silveira, B.M.; Santos, V.M.R. dos; Novack, K.M.; Lopes, S.A.

2014-01-01

The graft copolymer PMMA-g-PEG went through chemical transformations in its chain through acetylation, halogenation, methylation and esterification followed by hydrolysis reactions. Subsequently, the copolymer PMMA-g-PEG derivatives passed through the process of emulsification and incorporation of the drug fluconazole. Derivatives copolymers were characterized by infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM) after incorporation in order to evaluate their effectiveness. The efficiency of incorporation was observed and it was also verified that the complexity of polymer chain influence in the incorporated fluconazole content. (author)

Halloysite nanotube incorporation into adhesive systems—effect on bond strength to human dentin.

Science.gov (United States)

Alkatheeri, Mohammed S; Palasuk, Jadesada; Eckert, George J; Platt, Jeffrey A; Bottino, Marco C

2015-11-01

This study aimed to evaluate the effect of Halloysite® aluminosilicate clay nanotube (HNT) incorporation into a two-step etch-and-rinse (ER) and a one-step self-etch (SE) adhesive on human dentin shear bond strength (SBS). Ten groups (n = 12) were prepared according to the adhesive system (i.e., ER or SE) and amount of HNT incorporated (5-20%, w/v), as follows: commercial control (i.e., the adhesive was used as purchased, 0% HNT); experimental control (i.e., the adhesive was processed through mixing/stirring and sonication similarly to the HNT-incorporated experimental groups, but without HNT); and 5, 10, and 20% HNT. SBS testing was performed after 24 h of storage in deionized water at 37 °C. Failure modes were examined using a stereomicroscope (×40). Scanning electron microscopy (SEM) of the resin-dentin interface of selected specimens was carried out. Two-way ANOVA revealed that incorporation of HNT up to 20% (w/v) in ER and up to 10% (w/v) in SE demonstrated an increased SBS compared to their experimental controls. Compared to the commercial control, SBS of HNT-modified dentin adhesives was not significantly different for ER adhesives (p > 0.05) but was significantly higher with 5% HNT in the SE adhesive (p < 0.05). Failure modes were predominantly adhesive and mixed failures. SEM micrographs of resin-dentin interfaces for ER-commercial control and ER-10% showed a similar morphology. A thicker adhesive layer and the presence of agglomerated HNT on the resin tags were seen in ER-10%. An increased number of short resin tags in SE-5% compared with SE-commercial control were observed. HNT addition up to 20% in ER and up to 10 % in SE showed increased SBS to dentin compared with the experimental control. HNT can be used not only to reinforce adhesive resins but also hold potential for the development of bioactive adhesives by the encapsulation of matrix metalloproteinase (MMP) inhibitors or anticariogenic agents.

The motion of a redox front in a system of bentonite and rock, incorporating fracture transport effects

International Nuclear Information System (INIS)

Shaw, W.; Robinson, P.

1992-02-01

This report presents new calculations of the motion of a redox front in a system of bentonite and fractured rock, incorporation advection and diffusion of oxidants in fracture water. The results reported here have been incorporated into preliminary base case calculations using the source term model CALIBRE. The model presented here differs mainly in its treatment of the effects of the fracture. Previously, a 'zero-concentration' boundary condition was applied, and this resulted in retardation of the front near the fracture. When a more detailed advection-diffusion model is applied, the front is advanced in a neighbourhood of the fracture. (25 refs.) (au)

Towards a more accurate microscopic description of the moving contact line problem - incorporating nonlocal effects through a statistical mechanics framework

Science.gov (United States)

Nold, Andreas; Goddard, Ben; Sibley, David; Kalliadasis, Serafim

2014-03-01

Multiscale effects play a predominant role in wetting phenomena such as the moving contact line. An accurate description is of paramount interest for a wide range of industrial applications, yet it is a matter of ongoing research, due to the difficulty of incorporating different physical effects in one model. Important small-scale phenomena are corrections to the attractive fluid-fluid and wall-fluid forces in inhomogeneous density distributions, which often previously have been accounted for by the disjoining pressure in an ad-hoc manner. We systematically derive a novel model for the description of a single-component liquid-vapor multiphase system which inherently incorporates these nonlocal effects. This derivation, which is inspired by statistical mechanics in the framework of colloidal density functional theory, is critically discussed with respect to its assumptions and restrictions. The model is then employed numerically to study a moving contact line of a liquid fluid displacing its vapor phase. We show how nonlocal physical effects are inherently incorporated by the model and describe how classical macroscopic results for the contact line motion are retrieved. We acknowledge financial support from ERC Advanced Grant No. 247031 and Imperial College through a DTG International Studentship.

Dopant Adsorption and Incorporation at Irradiated GaN Surfaces

Science.gov (United States)

Sun, Qiang; Selloni, Annabella; Myers, Thomas; Doolittle, W. Alan

2006-03-01

Mg and O are two of the common dopants in GaN, but, in spite of extensive investigation, the atomic scale understanding of their adsorption and incorporation is still incomplete. In particular, high-energy electron irradiation, such as occurring during RHEED, has been reported to have an important effect on the incorporation of these impurities, but no study has addressed the detailed mechanisms of this effect yet. Here we use DFT calculations to study the adsorption and incorporation of Mg and O at the Ga- and N-polar GaN surfaces under various Ga, Mg and O coverage conditions as well as in presence of light or electron beam-induced electronic excitation. We find that the adsorption and incorporation of the two impurities have opposite surface polarity dependence: substitutional Mg prefers to incorporate at the GaN(0001) surface, while O prefers to adsorb and incorporate at the N-polar surface. In addition, our results indicate that in presence of light irradiation the tendency of Mg to surface-segregate is reduced. The O adsorption energy on the N-polar surface is also significantly reduced, consistent with the experimental observation of a much smaller concentration of oxygen in the irradiated samples.

Discontinuous Galerkin Time-Domain Modeling of Graphene Nano-Ribbon Incorporating the Spatial Dispersion Effects

KAUST Repository

Li, Ping; Jiang, Li Jun; Bagci, Hakan

2018-01-01

It is well known that graphene demonstrates spatial dispersion properties, i.e., its conductivity is nonlocal and a function of spectral wave number (momentum operator) q. In this paper, to account for effects of spatial dispersion on transmission of high speed signals along graphene nano-ribbon (GNR) interconnects, a discontinuous Galerkin time-domain (DGTD) algorithm is proposed. The atomically-thick GNR is modeled using a nonlocal transparent surface impedance boundary condition (SIBC) incorporated into the DGTD scheme. Since the conductivity is a complicated function of q (and one cannot find an analytical Fourier transform pair between q and spatial differential operators), an exact time domain SIBC model cannot be derived. To overcome this problem, the conductivity is approximated by its Taylor series in spectral domain under low-q assumption. This approach permits expressing the time domain SIBC in the form of a second-order partial differential equation (PDE) in current density and electric field intensity. To permit easy incorporation of this PDE with the DGTD algorithm, three auxiliary variables, which degenerate the second-order (temporal and spatial) differential operators to first-order ones, are introduced. Regarding to the temporal dispersion effects, the auxiliary differential equation (ADE) method is utilized to eliminates the expensive temporal convolutions. To demonstrate the applicability of the proposed scheme, numerical results, which involve characterization of spatial dispersion effects on the transfer impedance matrix of GNR interconnects, are presented.

Discontinuous Galerkin Time-Domain Modeling of Graphene Nano-Ribbon Incorporating the Spatial Dispersion Effects

KAUST Repository

Li, Ping

2018-04-13

It is well known that graphene demonstrates spatial dispersion properties, i.e., its conductivity is nonlocal and a function of spectral wave number (momentum operator) q. In this paper, to account for effects of spatial dispersion on transmission of high speed signals along graphene nano-ribbon (GNR) interconnects, a discontinuous Galerkin time-domain (DGTD) algorithm is proposed. The atomically-thick GNR is modeled using a nonlocal transparent surface impedance boundary condition (SIBC) incorporated into the DGTD scheme. Since the conductivity is a complicated function of q (and one cannot find an analytical Fourier transform pair between q and spatial differential operators), an exact time domain SIBC model cannot be derived. To overcome this problem, the conductivity is approximated by its Taylor series in spectral domain under low-q assumption. This approach permits expressing the time domain SIBC in the form of a second-order partial differential equation (PDE) in current density and electric field intensity. To permit easy incorporation of this PDE with the DGTD algorithm, three auxiliary variables, which degenerate the second-order (temporal and spatial) differential operators to first-order ones, are introduced. Regarding to the temporal dispersion effects, the auxiliary differential equation (ADE) method is utilized to eliminates the expensive temporal convolutions. To demonstrate the applicability of the proposed scheme, numerical results, which involve characterization of spatial dispersion effects on the transfer impedance matrix of GNR interconnects, are presented.

Effects of Thickness of a Low-Temperature Buffer and Impurity Incorporation on the Characteristics of Nitrogen-polar GaN.

Science.gov (United States)

Yang, Fann-Wei; Chen, Yu-Yu; Feng, Shih-Wei; Sun, Qian; Han, Jung

2016-12-01

In this study, effects of the thickness of a low temperature (LT) buffer and impurity incorporation on the characteristics of Nitrogen (N)-polar GaN are investigated. By using either a nitridation or thermal annealing step before the deposition of a LT buffer, three N-polar GaN samples with different thicknesses of LT buffer and different impurity incorporations are prepared. It is found that the sample with the thinnest LT buffer and a nitridation step proves to be the best in terms of a fewer impurity incorporations, strong PL intensity, fast mobility, small biaxial strain, and smooth surface. As the temperature increases at ~10 K, the apparent donor-acceptor-pair band is responsible for the decreasing integral intensity of the band-to-band emission peak. In addition, the thermal annealing of the sapphire substrates may cause more impurity incorporation around the HT-GaN/LT-GaN/sapphire interfacial regions, which in turn may result in a lower carrier mobility, larger biaxial strain, larger bandgap shift, and stronger yellow luminescence. By using a nitridation step, both a thinner LT buffer and less impurity incorporation are beneficial to obtaining a high quality N-polar GaN.

The Effect of UV Aging on Antimicrobial and Mechanical Properties of PLA Films with Incorporated Zinc Oxide Nanoparticles.

Science.gov (United States)

Mizielińska, Małgorzata; Kowalska, Urszula; Jarosz, Michał; Sumińska, Patrycja; Landercy, Nicolas; Duquesne, Emmanuel

2018-04-18

The aim of this study was to examine the influence of accelerated UV-aging on the activity against chosen microorganisms and the mechanical properties of poly-lactic acid (PLA) films enhanced with ZnO nanoparticles. The pure PLA films and tri-layered PLAZnO1%/PLA/PLAZnO1% films of 150 µm thickness were extruded. The samples were treated with UV-A and Q-SUN irradiation. After irradiation the antimicrobial activity and mechanical properties of the films were analyzed. The results of the study demonstrated that PLA films did not inhibit the growth of Staphylococcus aureus , Bacillus cereus , Escherichia coli , Bacillus atrophaeus , and Candida albicans cells. PLA films with incorporated zinc oxide nanoparticles decreased the number of analyzed microorganisms. Accelerated UV aging had no negative effect on the activity of the film containing nano-ZnO against Gram-positive bacteria, but it influenced the activity against Gram-negative cells and C. albicans . Q-SUN irradiation decreased the antimicrobial effect of films with incorporated nanoparticles against B. cereus . UV-A and Q-UV irradiation did not influence the mechanical properties of PLA films containing incorporated ZnO nanoparticles.

Context incorporation using context-aware language features

OpenAIRE

Vlachostergiou, Aggeliki; Marandianos, George; Kollias, Stefanos

2017-01-01

This paper investigates the problem of context incorporation into human language systems and particular in Sentiment Analysis (SA) systems. So far, the analysis of how different features, when incorporated into such systems, improve their performance, has been discussed in a number of studies. However, a complete picture of their effectiveness remains unexplored. With this work, we attempt to extend the pool of the context - aware language features at the sentence level and to provide the ...

Effect of incorporation of zinc oxide nanoparticles on mechanical properties of conventional glass ionomer cements.

Science.gov (United States)

Panahandeh, Narges; Torabzadeh, Hassan; Aghaee, Mohammadamin; Hasani, Elham; Safa, Saeed

2018-01-01

The aim of this study is to investigate the physical properties of conventional and resin-modified glass ionomer cements (GICs) compared to GICs supplemented with zinc oxide (ZnO) nanofiller particles at 5% (w/w). In this in vitro study, ZnO nanoparticles of different morphologies (nanospherical, nanorod, and nanoflower) were incorporated to glass ionomer powder. The samples were subjected to the flexural strength ( n = 20) and surface hardness test ( n = 12) using a universal testing machine and a Vickers hardness machine, respectively. Surface analysis and crystal structure of samples were performed with scanning electron microscope and X-radiation diffraction, respectively. The data were analyzed using one-way ANOVA, Shapiro-Wilk, and Tukey's tests ( P glass ionomer containing nanoparticles was not significantly different from the control group ( P > 0.05). The surface hardness of the glass ionomer containing nanospherical or nanoflower ZnO was significantly lower than the control group ( P glass ionomer containing nanorod ZnO was not significantly different from the control group ( P = 0.868). Incorporation of nanospherical and nanoflower ZnO to glass ionomer decreased their surface hardness, without any changes on their flexural strength. Incorporation of nanorod ZnO particles caused no effect on the mechanical properties.

Role of Glycol Chitosan-incorporated Ursolic Acid Nanoparticles in ...

African Journals Online (AJOL)

Purpose: To investigate the effect of ursolic acid (UA)-incorporated glycol chitosan (GC) nanoparticles on inhibition of human osteosarcoma. Methods: U2OS and Saos-2 osteosarcoma cells were transfected with ursolic acid (UA) incorporated glycol chitosan (GC) nanoparticles. Ultraviolet (UV) spectrophotometry was used ...

Effects of screenhouse cultivation and organic materials incorporation on global warming potential in rice fields.

Science.gov (United States)

Xu, Guochun; Liu, Xin; Wang, Qiangsheng; Xiong, Ruiheng; Hang, Yuhao

2017-03-01

Global rice production will be increasingly challenged by providing healthy food for a growing population at minimal environmental cost. In this study, a 2-year field experiment was conducted to investigate the effects of a novel rice cultivation mode (screenhouse cultivation, SHC) and organic material (OM) incorporation (wheat straw and wheat straw-based biogas residue) on methane (CH 4 ) and nitrous oxide (N 2 O) emissions and rice yields. In addition, the environmental factors and soil properties were also determined. Relative to the traditional open-field cultivation (OFC), SHC decreased the CH 4 and N 2 O emissions by 6.58-18.73 and 2.51-21.35%, respectively, and the global warming potential (GWP) was reduced by 6.49-18.65%. This trend was mainly because of lower soil temperature and higher soil redox potential in SHC. Although the rice grain yield for SHC were reduced by 2.51-4.98% compared to the OFC, the CH 4 emissions and GWP per unit of grain yield (yield-scaled CH 4 emissions and GWP) under SHC were declined. Compared to use of inorganic fertilizer only (IN), combining inorganic fertilizer with wheat straw (WS) or wheat straw-based biogas residue (BR) improved rice grain yield by 2.12-4.10 and 4.68-5.89%, respectively. However, OM incorporation enhanced CH 4 emissions and GWP, leading to higher yield-scaled CH 4 emissions and GWP in WS treatment. Due to rice yield that is relatively high, there was no obvious effect of BR treatment on them. These findings suggest that apparent environmental benefit can be realized by applying SHC and fermenting straw aerobically before its incorporation.

Probabilistic seismic hazard estimates incorporating site effects - An example from Indiana, U.S.A

Science.gov (United States)

Hasse, J.S.; Park, C.H.; Nowack, R.L.; Hill, J.R.

2010-01-01

The U.S. Geological Survey (USGS) has published probabilistic earthquake hazard maps for the United States based on current knowledge of past earthquake activity and geological constraints on earthquake potential. These maps for the central and eastern United States assume standard site conditions with Swave velocities of 760 m/s in the top 30 m. For urban and infrastructure planning and long-term budgeting, the public is interested in similar probabilistic seismic hazard maps that take into account near-surface geological materials. We have implemented a probabilistic method for incorporating site effects into the USGS seismic hazard analysis that takes into account the first-order effects of the surface geologic conditions. The thicknesses of sediments, which play a large role in amplification, were derived from a P-wave refraction database with over 13, 000 profiles, and a preliminary geology-based velocity model was constructed from available information on S-wave velocities. An interesting feature of the preliminary hazard maps incorporating site effects is the approximate factor of two increases in the 1-Hz spectral acceleration with 2 percent probability of exceedance in 50 years for parts of the greater Indianapolis metropolitan region and surrounding parts of central Indiana. This effect is primarily due to the relatively thick sequence of sediments infilling ancient bedrock topography that has been deposited since the Pleistocene Epoch. As expected, the Late Pleistocene and Holocene depositional systems of the Wabash and Ohio Rivers produce additional amplification in the southwestern part of Indiana. Ground motions decrease, as would be expected, toward the bedrock units in south-central Indiana, where motions are significantly lower than the values on the USGS maps.

Effectiveness of incorporating citric acid in cassava starch edible coatings to preserve quality of Martha tomatoes

Science.gov (United States)

Ambarsari, I.; Oktaningrum, G. N.; Endrasari, R.

2018-01-01

Tomato as an agricultural product is extremely perishable. Coatings of tomatoes with edible starch extend quality and storage life of the fruits. Incorporation of citric acid as antimicrobial agent in the edible starch coatings is expected to preserve the quality of tomatoes during storage. The aim of this study was to verify the effectiveness of citric acid incorporated in cassava starch coating to preserve quality of tomatoes. The edible coatings formula consisted of cassava starch solutions (1; 2; 3%), citric acid (0.5; 1.0%) and glycerol (10%). Tomatoes were dipped to the coating solution for 10 seconds, then air-dried and stored at room temperature during 18 days. All the treatments were carried out in triplicates. Experimental data were analyzed using One Way ANOVA. The results showed that coating treatments did not affect the weight loss, moisture content, color characteristic, carotene and vitamin C content on Martha tomatoes. The low concentration of starch coating on Martha tomatoes are indicated to be the reason why there was no significant difference between coated and coated tomatoes for some parameters. However, incorporating citric acid in cassava starch-based coatings could prevent tomato fruits from firmness reduction and spoilage during storage.

Noxious facility impact projection: Incorporating the effects of risk aversion

International Nuclear Information System (INIS)

Nieves, L.A.

1993-01-01

Developing new sites for noxious facilities has become a complex process with many potential pitfalls. In addition to the need to negotiate conditions acceptable to the host community, siting success may depend on the facility proposer's ability to identify a candidate site that not only meets technical requirements, but that is located in a community or region whose population is not highly averse to the risks associated with the type of facility being proposed. Success may also depend on the proposer accurately assessing potential impacts of the facility and offering an equitable compensation package to the people affected by it. Facility impact assessments, as typically performed, include only the effects of changes in population, employment and economic activity associated with facility construction and operation. Because of their scope, such assessments usually show a short-run, net economic benefit for the host region, making the intensely negative public reaction to some types and locations of facilities seem unreasonable. The impact component excluded from these assessments is the long-run economic effect of public perceptions of facility risk and nuisance characteristics. Recent developments in psychological and economic measurement techniques have opened the possibility of correcting this flaw by incorporating public perceptions in projections of economic impacts from noxious facilities

Assessement of the effect of Pyrimetin in combined injury with external irradiation and oral cerium-144 incorporation

International Nuclear Information System (INIS)

Kiradzhiev, G.; Khadzhidekova, E.

1985-01-01

The effect of the preparation Pyrimetin on rats, subjected to external irradiation combined with oral cerium 144 incorporation was studied. LD 50/30 of cerium-144 was used as biological criterion. It was shown that by this criterion Pyrimetin essentially abolished the potentiated by external radiation effect of cerium. Probably, the preparation leads to normalization of the gastro-intestinal motor function and the dose loading of the colon

Combined effect of incorporated 90Sr, alcohol, and tobacco smokes on reproduction of warm-blooded animals

International Nuclear Information System (INIS)

Mashneva, N.I.

1987-01-01

Combined effect of incorporated 90 Sr, ethanol, tobacco smokes on reproduction of warm-blooded animals is studied. It is shown that chronic intake of strontium 90, ethanol and tobacco smokes suppresses the reproduction of animals. But difficulty of obtained data extrapolation to a human being is not a sufficient ground for revising existing hygienic standards for persons being in contact with ionizing radiation and habitual to alcohol and smoking. Nevertheless, they permit to set a problem on negative effect of such habits

Large strain cyclic behavior of metastable austenic stainless steel

International Nuclear Information System (INIS)

Geijselaers, H.J.M.; Hilkhuijsen, P.; Bor, T.C.; Boogaard, A.H. van den

2015-01-01

Metastable austenitic stainless steel will transform to martensite when subjected to mechanical working. In this research an austenitic stainless steel has been subjected to large amplitude strain paths containing a strain reversal. During the tests, apart from the stress and the strain also magnetic induction was measured. From the in situ magnetic induction measurements an estimate of the stress partitioning among the phases is determined. When the strain path reversal is applied at low strains, a classical Bauschinger effect is observed. When the strain reversal is applied at higher strains, a higher flow stress is measured after the reversal compared to the flow stress before reversal. Also a stagnation of the transformation is observed, meaning that a higher strain as well as a higher stress than before the strain path change is required to restart the transformation after reversal. The observed behavior can be explained by a model in which for the martensitic transformation a stress induced transformation model is used. The constitutive behavior of both the austenite phase and the martensite is described by a Chaboche model to account for the Bauschinger effect. Mean-field homogenization of the material behavior of the individual phases is employed to obtain a constitutive behavior of the two-phase composite. The overall applied stress, the stress in the martensite phase and the observed transformation behavior during cyclic shear are very well reproduced by the model simulations

Large strain cyclic behavior of metastable austenic stainless steel

Energy Technology Data Exchange (ETDEWEB)

Geijselaers, H.J.M., E-mail: h.j.m.geijselaers@utwente.nl; Hilkhuijsen, P.; Bor, T.C.; Boogaard, A.H. van den

2015-04-17

Metastable austenitic stainless steel will transform to martensite when subjected to mechanical working. In this research an austenitic stainless steel has been subjected to large amplitude strain paths containing a strain reversal. During the tests, apart from the stress and the strain also magnetic induction was measured. From the in situ magnetic induction measurements an estimate of the stress partitioning among the phases is determined. When the strain path reversal is applied at low strains, a classical Bauschinger effect is observed. When the strain reversal is applied at higher strains, a higher flow stress is measured after the reversal compared to the flow stress before reversal. Also a stagnation of the transformation is observed, meaning that a higher strain as well as a higher stress than before the strain path change is required to restart the transformation after reversal. The observed behavior can be explained by a model in which for the martensitic transformation a stress induced transformation model is used. The constitutive behavior of both the austenite phase and the martensite is described by a Chaboche model to account for the Bauschinger effect. Mean-field homogenization of the material behavior of the individual phases is employed to obtain a constitutive behavior of the two-phase composite. The overall applied stress, the stress in the martensite phase and the observed transformation behavior during cyclic shear are very well reproduced by the model simulations.

Effects of alpha radiation on plutonium incorporated in dosimetric materials by ESR studies

International Nuclear Information System (INIS)

Bhide, M.K.; Kadam, R.M.; Mohapatra, Manoj; Godbole, S.V.

2007-01-01

The in situ alpha irradiation effects of some ESR dosimetric materials namely alanine, 2-methyl alanine and ammonium tartrate were studied by incorporating 1% plutonium by weight in them. The radical intensity was monitored as a function of alpha dose. It was found that in the dose region 1-35 kGy ammonium tartrate showed better signal intensity, linearity and dose response as compared to the other materials. This was attributed to the single radical produced in case of the tartrate giving a sharp spectrum and the fast relaxation times owing to less saturation of ESR signals. (author)

Characterization of a silver-incorporated calcium phosphate film by RBS and its antimicrobial effects

International Nuclear Information System (INIS)

Han, I-H; Lee, I-S; Song, J-H; Lee, M-H; Park, J-C; Lee, G-H; Sun, X-D; Chung, S-M

2007-01-01

A thin calcium phosphate film was synthesized on both commercially pure Ti and Si wafers by electron beam evaporation of hydroxyapatite as an evaporant with simultaneous Ar ion beam bombardments. Silver was introduced into an ion-beam-assisted deposition of a calcium phosphate thin film for antimicrobial effect. The amount of incorporated silver ions was controlled by immersing calcium-phosphate-coated samples in different AgNO 3 concentrations, and Rutherford backscattering spectrometry (RBS) was employed to measure the amounts of substituted silver. The higher concentration of silver in the calcium phosphate film was more effective in reducing the bacteria of Escherichia coli ATCC 8739 and Streptococcus mutans OMZ 65 on contact with respect to controls

Characterization of a silver-incorporated calcium phosphate film by RBS and its antimicrobial effects

Energy Technology Data Exchange (ETDEWEB)

Han, I-H [Institute of Physics and Applied Physics, and Atomic-Scale Surface Science Research Center, Yonsei University, Seou1 120-749 (Korea, Republic of); Lee, I-S [Institute of Physics and Applied Physics, and Atomic-Scale Surface Science Research Center, Yonsei University, Seou1 120-749 (Korea, Republic of); Song, J-H [Advanced Analysis Center, Korea Institute of Science and Technology, Seoul 136-791 (Korea, Republic of); Lee, M-H [Department of Medical Engineering, Yonsei University, Seoul 120-752 (Korea, Republic of); Park, J-C [Department of Medical Engineering, Yonsei University, Seoul 120-752 (Korea, Republic of); Lee, G-H [Korea Institute of Machinery and Materials, Chang-Won 641-010 (Korea, Republic of); Sun, X-D [Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Chung, S-M [Implantium Research Center, Seoul 135-879 (Korea, Republic of)

2007-09-15

A thin calcium phosphate film was synthesized on both commercially pure Ti and Si wafers by electron beam evaporation of hydroxyapatite as an evaporant with simultaneous Ar ion beam bombardments. Silver was introduced into an ion-beam-assisted deposition of a calcium phosphate thin film for antimicrobial effect. The amount of incorporated silver ions was controlled by immersing calcium-phosphate-coated samples in different AgNO{sub 3} concentrations, and Rutherford backscattering spectrometry (RBS) was employed to measure the amounts of substituted silver. The higher concentration of silver in the calcium phosphate film was more effective in reducing the bacteria of Escherichia coli ATCC 8739 and Streptococcus mutans OMZ 65 on contact with respect to controls.

Nano-graphene oxide incorporated into PMMA resin to prevent microbial adhesion.

Science.gov (United States)

Lee, Jung-Hwan; Jo, Jeong-Ki; Kim, Dong-Ae; Patel, Kapil Dev; Kim, Hae-Won; Lee, Hae-Hyoung

2018-04-01

Although polymethyl methacrylate (PMMA) is widely used as a dental material, a major challenge of using this substance is its poor antimicrobial (anti-adhesion) effects, which increase oral infections. Here, graphene-oxide nanosheets (nGO) were incorporated into PMMA to introduce sustained antimicrobial-adhesive effects by increasing the hydrophilicity of PMMA. After characterizing nGO and nGO-incorporated PMMA (up to 2wt%) in terms of morphology and surface characteristics, 3-point flexural strength and hardness were evaluated. The anti-adhesive effects were determined for 4 different microbial species with experimental specimens and the underlying anti-adhesive mechanism was investigated by a non-thermal oxygen plasma treatment. Sustained antimicrobial-adhesive effects were characterized with incubation in artificial saliva for up to 28 days. The typical nanosheet morphology was observed for nGO. Incorporating nGO into PMMA roughened its surface and increased its hydrophilicity without compromising flexural strength or surface hardness. An anti-adhesive effect after 1h of exposure to microbial species in artificial saliva was observed in nGO-incorporated specimens, which accelerated with increasing levels of nGO without significant cytotoxicity to oral keratinocytes. Plasma treatment of native PMMA demonstrated that the antimicrobial-adhesive effects of nGO incorporation were at least partially due to increased hydrophilicity, not changes in the surface roughness. A sustained antimicrobial-adhesive property against Candida albicans was observed in 2% nGO for up to 28 days. The presence of sustained anti-adhesion properties in nGO-incorporated PMMA without loading any antimicrobial drugs suggests the potential usefulness of this compound as a promising antimicrobial dental material for dentures, orthodontic devices and provisional restorative materials. Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Effect of glucagon on cyclic AMP, albumin metabolism and incorporation of 14C-leucine into proteins in isolated parenchymal rat liver cells

DEFF Research Database (Denmark)

Dich, J; Gluud, C N

1976-01-01

wet wt. This is about the rate found in the perfused liver, Glucagon (10(-8-10(-6) M) inhibited albumin secretion and the incorporation of 14C-leucine into albumin, into total proteins in the medium and into total proteins in the cell suspension. The effect of glucagon on albumin secretion...... is compatible with an effect on the rate of synthesis. A positive correlation existed between the maximal level of cyclic AMP after glucagon administration and the inhibition of both albumin secretion and the incorporation of 149leucine....

Incorporation of multiwalled carbon nanotubes to acrylic based bone cements: effects on mechanical and thermal properties.

Science.gov (United States)

Ormsby, Ross; McNally, Tony; Mitchell, Christina; Dunne, Nicholas

2010-02-01

Polymethyl methacrylate (PMMA) bone cement-multiwalled carbon nanotube (MWCNT) nanocomposites with a weight loading of 0.1% were prepared using 3 different methods of MWCNT incorporation. The mechanical and thermal properties of the resultant nanocomposite cements were characterised in accordance with the international standard for acrylic resin cements. The mechanical properties of the resultant nanocomposite cements were influenced by the type of MWCNT and method of incorporation used. The exothermic polymerisation reaction for the PMMA bone cement was significantly reduced when thermally conductive functionalised MWCNTs were added. This reduction in exotherm translated in a decrease in thermal necrosis index value of the respective nanocomposite cements, which potentially could reduce the hyperthermia experienced in vivo. The morphology and degree of dispersion of the MWCNTs in the PMMA matrix at different scales were analysed using scanning electron microscopy. Improvements in mechanical properties were attributed to the MWCNTs arresting/retarding crack propagation through the cement by providing a bridging effect into the wake of the crack, normal to the direction of crack growth. MWCNT agglomerations were evident within the cement microstructure, the degree of these agglomerations was dependent on the method used to incorporate the MWCNTs into the cement. Copyright 2009. Published by Elsevier Ltd.

Analytical incorporation of fractionation effects in probabilistic treatment planning for intensity-modulated proton therapy.

Science.gov (United States)

Wahl, Niklas; Hennig, Philipp; Wieser, Hans-Peter; Bangert, Mark

2018-04-01

We show that it is possible to explicitly incorporate fractionation effects into closed-form probabilistic treatment plan analysis and optimization for intensity-modulated proton therapy with analytical probabilistic modeling (APM). We study the impact of different fractionation schemes on the dosimetric uncertainty induced by random and systematic sources of range and setup uncertainty for treatment plans that were optimized with and without consideration of the number of treatment fractions. The APM framework is capable of handling arbitrarily correlated uncertainty models including systematic and random errors in the context of fractionation. On this basis, we construct an analytical dose variance computation pipeline that explicitly considers the number of treatment fractions for uncertainty quantitation and minimization during treatment planning. We evaluate the variance computation model in comparison to random sampling of 100 treatments for conventional and probabilistic treatment plans under different fractionation schemes (1, 5, 30 fractions) for an intracranial, a paraspinal and a prostate case. The impact of neglecting the fractionation scheme during treatment planning is investigated by applying treatment plans that were generated with probabilistic optimization for 1 fraction in a higher number of fractions and comparing them to the probabilistic plans optimized under explicit consideration of the number of fractions. APM enables the construction of an analytical variance computation model for dose uncertainty considering fractionation at negligible computational overhead. It is computationally feasible (a) to simultaneously perform a robustness analysis for all possible fraction numbers and (b) to perform a probabilistic treatment plan optimization for a specific fraction number. The incorporation of fractionation assumptions for robustness analysis exposes a dose to uncertainty trade-off, i.e., the dose in the organs at risk is increased for a

Effect of voluntary exercise and dietary protein levels on incorporation of 14C-leucine into protein by mice liver slices in vitro

International Nuclear Information System (INIS)

Yashiro, Masanori; Kimura, Shuichi

1983-01-01

The effect of voluntary exercise on incorporation of 14 C-leucine into protein by mice liver slices in vitro were examined with mice fed 4 %, 6 % and 20 % protein diets. The incorporation of 14 C-leucine increased as dietary protein levels decreased and was significantly higher in liver slices of exercise groups than in slices of non-exercise groups. (author)

Incorporation of squalene into rod outer segments

International Nuclear Information System (INIS)

Keller, R.K.; Fliesler, S.J.

1990-01-01

We have reported previously that squalene is the major radiolabeled nonsaponifiable lipid product derived from [ 3 H]acetate in short term incubations of frog retinas. In the present study, we demonstrate that newly synthesized squalene is incorporated into rod outer segments under similar in vitro conditions. We show further that squalene is an endogenous constituent of frog rod outer segment membranes; its concentration is approximately 9.5 nmol/mumol of phospholipid or about 9% of the level of cholesterol. Pulse-chase experiments with radiolabeled precursors revealed no metabolism of outer segment squalene to sterols in up to 20 h of chase. Taken together with our previous absolute rate studies, these results suggest that most, if not all, of the squalene synthesized by the frog retina is transported to rod outer segments. Synthesis of protein is not required for squalene transport since puromycin had no effect on squalene incorporation into outer segments. Conversely, inhibition of isoprenoid synthesis with mevinolin had no effect on the incorporation of opsin into the outer segment. These latter results support the conclusion that the de novo synthesis and subsequent intracellular trafficking of opsin and isoprenoid lipids destined for the outer segment occur via independent mechanisms

Effectiveness of dental checkups incorporating tooth brushing instruction.

Science.gov (United States)

Furusawa, Masahiro; Takahashi, Jun-ichi; Isoyama, Motoko; Kitamura, Yoshiko; Kashima, Tomoko; Ueshima, Fumie; Nakahama, Noriko; Araki, Misako; Rokukawa, Yasuko; Takahashi, Yoshikazu; Makiishi, Takemi; Yatabe, Ken-ichi

2011-01-01

The purpose of this study was to compare the effectiveness of dental checkups incorporating tooth-brushing instruction (TBI) with that of conventional dental checkups. A team consisting of one dentist and three dental hygienists saw an average of 60 employees per day on-site at an airline company. The patient's teeth were stained with a disclosing tablet and the results recorded on a Plaque Control Record (PCR) chart. The patient was then given TBI. After recording the relevant data, including TBI given and PCR scores, the charts were stored. Checkups were performed in a total of 3,854 patients between 2001 and 2005 and changes in annual scores investigated. In addition, annual shifts in mean score in patients receiving checkups over all five years were compared with those in patients receiving checkups for the first time in each of the five years. The mean score in patients receiving a checkup in 2001 was 35.1%, declining by 2.6 points to 32.5% in 2005. Among patients receiving checkups over all five years, the mean score in 2001 was 34.0%, declining by 11.2 points to 22.8% in 2005. Over the five-year period, the mean score in patients receiving checkups was 34.1%. In patients receiving checkups over all five years, the proportion with PCR scores dental checkups that simply check for caries. In future, this type of checkup should contribute to improved preventative dentistry with minimal intervention.

Mg Incorporation Efficiency in Pulsed MOCVD of N-Polar GaN:Mg

Science.gov (United States)

Marini, Jonathan; Mahaboob, Isra; Hogan, Kasey; Novak, Steve; Bell, L. D.; Shahedipour-Sandvik, F.

2017-10-01

We report on the effect of growth polarity and pulsed or δ -doped growth mode on impurity incorporation in metalorganic chemical vapor deposition-grown GaN. In Ga-polar orientation, up to 12× enhancement in Mg concentration for given Mg flow rate is observed, resulting in enhanced p-type conductivity for these samples. In contrast, this enhancement effect is greatly diminished for N-polar samples, falling off with increasing Mg flow and showing maximum enhancement of 2.7× at 30 nmol/min Mg flow. At higher Mg flow rates, Mg incorporation at normal levels did not correspond to p-type conductivity, which may be due to Mg incorporation at nonacceptor sites. Concentrations of C, O, and Si were also investigated, revealing dependence on Mg flow in N-polar pulsed samples. Carbon incorporation was found to decrease with increasing Mg flow, and oxygen incorporation was found to remain high across varied Mg flow. These effects combine to result in N-polar samples that are not p-type when using the pulsed growth mode.

Effect of metabolic inhibitors on 3H-lysine incorporation in the stilbestrol stimulated chick oviduct

International Nuclear Information System (INIS)

Goel, V.K.; Joshi, B.C.

1976-01-01

Effect of metabolic inhibitors, namely, actinomycin-D and mitomycin-C on 3 H-lysine incorporation in the stilbestrol stimulated chick oviduct has been studied. It was inferred from the study that the action of the metabolic inhibitors used may be dependent on the level of the hormone present or in other words, on the rate at which the protein synthesis is going on in the system. Mitomycin-C has the same effect in this system as actinomycin-D but at a dose level almost 4 times that of the latter. The results are discussed in the light of the findings of other workers. (author)

Effects of NO3(-) and NH4(+) and urea on each other's uptake and incorporation

Science.gov (United States)

Huffaker, R. C.; Ward, M. R.

1986-01-01

The purpose was to determine the optimal use by wheat plants of the N sources expected from processing biological waste products, NO3(-),NO2(-)NH4(+), and urea. The approach was to determine the uptake and metabolic products of each N source (from single and multiple component solutions), inhibitory effects of each, feedback inhibition, and overall in vivo regulation of the rates of assimilation of each by wheat plants. Previously, researchers determined the interactions of NO3(-),NO2(-),NH4(+) on each other's uptake and incorporation. The assimilation and some of its effects on NO3(-) and NH4(+) assimilation which have been completed to data are discussed.

Accurate hardening modeling as basis for the realistic simulation of sheet forming processes with complex strain-path changes

International Nuclear Information System (INIS)

Levkovitch, Vladislav; Svendsen, Bob

2007-01-01

Sheet metal forming involves large strains and severe strain-path changes. Large plastic strains lead in many metals to the development of persistent dislocation structures resulting in strong flow anisotropy. This induced anisotropic behavior manifests itself in the case of a strain path change through very different stress-strain responses depending on the type of the strain-path change. While many metals exhibit a drop of the yield stress (Bauschinger effect) after a load reversal, some metals show an increase of the yield stress after an orthogonal strain-path change (so-called cross hardening). To model the Bauschinger effect, kinematic hardening has been successfully used for years. However, the usage of the kinematic hardening leads automatically to a drop of the yield stress after an orthogonal strain-path change contradicting tests exhibiting the cross hardening effect. Another effect, not accounted for in the classical elasto-plasticity, is the difference between the tensile and compressive strength, exhibited e.g. by some steel materials. In this work we present a phenomenological material model whose structure is motivated by polycrystalline modeling that takes into account the evolution of polarized dislocation structures on the grain level - the main cause of the induced flow anisotropy on the macroscopic level. The model considers besides the movement of the yield surface and its proportional expansion, as it is the case in conventional plasticity, also the changes of the yield surface shape (distortional hardening) and accounts for the pressure dependence of the flow stress. All these additional attributes turn out to be essential to model the stress-strain response of dual phase high strength steels subjected to non-proportional loading

Accurate Hardening Modeling As Basis For The Realistic Simulation Of Sheet Forming Processes With Complex Strain-Path Changes

International Nuclear Information System (INIS)

Levkovitch, Vladislav; Svendsen, Bob

2007-01-01

Sheet metal forming involves large strains and severe strain-path changes. Large plastic strains lead in many metals to the development of persistent dislocation structures resulting in strong flow anisotropy. This induced anisotropic behavior manifests itself in the case of a strain path change through very different stress-strain responses depending on the type of the strain-path change. While many metals exhibit a drop of the yield stress (Bauschinger effect) after a load reversal, some metals show an increase of the yield stress after an orthogonal strain-path change (so-called cross hardening). To model the Bauschinger effect, kinematic hardening has been successfully used for years. However, the usage of the kinematic hardening leads automatically to a drop of the yield stress after an orthogonal strain-path change contradicting tests exhibiting the cross hardening effect. Another effect, not accounted for in the classical elasto-plasticity, is the difference between the tensile and compressive strength, exhibited e.g. by some steel materials. In this work we present a phenomenological material model whose structure is motivated by polycrystalline modeling that takes into account the evolution of polarized dislocation structures on the grain level - the main cause of the induced flow anisotropy on the macroscopic level. The model considers besides the movement of the yield surface and its proportional expansion, as it is the case in conventional plasticity, also the changes of the yield surface shape (distortional hardening) and accounts for the pressure dependence of the flow stress. All these additional attributes turn out to be essential to model the stress-strain response of dual phase high strength steels subjected to non-proportional loading

Mutagenic effect of radionuclides incorporated into DNA of Drosophila melanogaster. Progress report, May 1974--May 1975

International Nuclear Information System (INIS)

Lee, W.R.

1975-01-01

The mutagenic effect of 3 H incorporated into DNA of Drosophila melanogaster was studied in relation to age and radiation dose. The 3 H was incorporated into DNA in the germ line by feeding male larvae in late second instar a pulse of the radionuclide. Genetic stocks were used in a mating scheme to produce a cross that produces only male larvae for labeling with the radionuclide, and another cross was made that produces the parental females as virgins since no male progeny are produced. The F 1 generation was scored for losses of the X or Y chromosome because of dominant markers, Bar-Stone and yellow-plus, on the Y-chromosome. All the F 1 and F 2 males were sterile permitting out-crossing of females to nontreated stocks for sex-linked recessive lethal tests in the F 2 and F 3 . (U.S.)

effect of o,p'-DDD on the in vivo incorporation of 3H-thymidine into DNA

International Nuclear Information System (INIS)

Lund, B.-O.; Brandt, I.; Busk, L.; Hellmann, B.

1990-01-01

The effects of o,p'-DDD on the DNA synthesis in the C57Bl mouse lung and liver were studied. As determined by 3 H-thymidine incorporation into DNA, a selective increase in the lung DNA synthesis (+59%) was observed 2 day after a single intraperiotoneal injection of 100 mg/kg o,p'-DDD. Microautoradiography showed that incorporated 3 H-thymidine was confined to a restricted number of heavily labelled cells, presumably proliferating type II cells. At the most, a 9 times higher rate of cell proliferation was observed in the lung 4 days after an intraperitoneal injection of 500 mg/kg o,p'-DDD. Using mouse lung or liver S-9 as activating system, no mutagenic activity of o,p'-DDD was detected in the Ames test. The induced cell proliferation may indicate a tissue-selective promotor activity of o,p'-DDD in the mouse lung. (author)

Hardening in Two-Phase Materials. I. Strength Contributions in Fibre-Reinforced Copper-Tungsten

DEFF Research Database (Denmark)

Lilholt, Hans

1977-01-01

Cyclic tests (Bauschinger tests) were conducted at 77 K and at room temperature on the fibre-reinforced material of single crystal Cu with long W-fibres of diameter 20 mum and volume fractions up to 4%. These tests enabled two important contributions to the total strength of the unrelaxed material...

The effects of acute morphine treatment on the incorporation of [3H]L-lysine by normal and regenerating facial nucleus neurons

International Nuclear Information System (INIS)

Sinatra, R.S.; Ford, D.H.; Rhines, R.K.

1979-01-01

The effect of morphine on the incorporation of [ 3 H]L-lysine into proteins of facial nucleus neurons was examined by light microscopic radioautography. Silver grains present within various compartments of normal and regenerating (3-, 7-. 14- and 21 days post-axotomy) neurons from saline-treated Wistar rats were compared with the amount present in similar cells from animals receiving 40 mg/kg morphine sulfate i.v. At 14- and 21-days post-axotomy, regenerating neurons were larger and the grain count in the emulsion over these cells was greater than that observed in normal (unoperated) neurons. In normal facial neurons, the accumulation of lysine into the nucleus and nucleolus was significantly lower 60 min after morphine adminstration. However, morphine's inhibition of lysine incorporation was even more pronounced in regenerating neurons. In these cells, nuclear lysine uptake was depressed at 3 and 7 days, while maximum inhibition of cytoplasmic incorporation occurred at 14-days post-axotomy. Morphine adminstration decreased nucleolar lysine incorporation at all survival intervals. (Auth.)

Effect of boron incorporation on the structural and photoluminescence properties of highly-strained InxGa1-xAs/GaAs multiple quantum wells

Directory of Open Access Journals (Sweden)

Qi Wang

2013-07-01

Full Text Available In this research, 5-period highly-strained BInGaAs/GaAs multiple quantum wells (MQWs have been successfully grown at 480-510ºC by LP-MOCVD. Room-temperature photoluminescence (RT-PL measurements of BInGaAs/GaAs MQWs showed the peak wavelength as long as 1.17 μm with full-width at half maximum (FWHM of only 29.5 meV. In addition, a slight blue-shift (∼18 meV of PL peak energy of InxGa1-xAs/GaAs MQWs was observed after boron incorporation. It has been found boron incorporation ( 40%, the positive effect of boron incorporation prevailed, i.e., boron incorporation completely suppressed the thickness undulation and lead to the improvement of PL properties.

Incorporating a hybrid urease-carbon nanotubes sensitive nanofilm on capacitive field-effect sensors for urea detection.

Science.gov (United States)

Siqueira, José R; Molinnus, Denise; Beging, Stefan; Schöning, Michael J

2014-06-03

The ideal combination among biomolecules and nanomaterials is the key for reaching biosensing units with high sensitivity. The challenge, however, is to find out a stable and sensitive film architecture that can be incorporated on the sensor's surface. In this paper, we report on the benefits of incorporating a layer-by-layer (LbL) nanofilm of polyamidoamine (PAMAM) dendrimer and carbon nanotubes (CNTs) on capacitive electrolyte-insulator-semiconductor (EIS) field-effect sensors for detecting urea. Three sensor arrangements were studied in order to investigate the adequate film architecture, involving the LbL film with the enzyme urease: (i) urease immobilized directly onto a bare EIS [EIS-urease] sensor; (ii) urease atop the LbL film over the EIS [EIS-(PAMAM/CNT)-urease] sensor; and (iii) urease sandwiched between the LbL film and another CNT layer [EIS-(PAMAM/CNT)-urease-CNT]. The surface morphology of all three urea-based EIS biosensors was investigated by atomic force microscopy (AFM), while the biosensing abilities were studied by means of capacitance-voltage (C/V) and dynamic constant-capacitance (ConCap) measureaments at urea concentrations ranging from 0.1 mM to 100 mM. The EIS-urease and EIS-(PAMAM/CNT)-urease sensors showed similar sensitivity (~18 mV/decade) and a nonregular signal behavior as the urea concentration increased. On the other hand, the EIS-(PAMAM/CNT)-urease-CNT sensor exhibited a superior output signal performance and higher sensitivity of about 33 mV/decade. The presence of the additional CNT layer was decisive to achieve a urea based EIS sensor with enhanced properties. Such sensitive architecture demonstrates that the incorporation of an adequate hybrid enzyme-nanofilm as sensing unit opens new prospects for biosensing applications using the field-effect sensor platform.

Effectiveness of insecticide-incorporated bags to control stored-product beetles

Science.gov (United States)

Adults of seven stored-product beetle species were exposed on the inside and outside surfaces of polypropylene polymer bags incorporated with the insecticide deltamethrin (approx. concentration of 3,000 ppm; ZeroFly® Storage Bags (3g/kg). Beetles were exposed for 60, 120, and 180 min, and 1, 3 and 5...

29 CFR 1917.3 - Incorporation by reference.

Science.gov (United States)

2010-07-01

... incorporated by reference in this part, have the same force and effect as other standards in this part. Only... Administration (OSHA), or at the OSHA Docket Office, U.S. Department of Labor, 200 Constitution Avenue, NW., Room...

Effect of N incorporation on the characteristics of InSbN P–N diodes

International Nuclear Information System (INIS)

Lim, K.P.; Pham, H.T.; Yoon, S.F.; Tan, K.H.

2012-01-01

We report on the effect of N incorporation in the characteristics of the 2 μm thick InSbN photoabsorption layer of a p–n diode grown by molecular beam epitaxy using a radio-frequency plasma-assisted nitrogen source. As compared to N free InSb layer, the absorption wavelength extends to near 9 μm. On the other hand, high reverse dark current and series resistances are observed in the electrical characteristics of the InSbN diode which are contributed with the presence of planar growth defects. These results will be useful to those working on midinfrared photodetectors.

Simultaneous incorporation of carbonate and fluoride in synthetic apatites: Effect on crystallographic and physico-chemical properties.

Science.gov (United States)

Yao, Fang; LeGeros, John P; LeGeros, Racquel Z

2009-07-01

The mineral in bone is an impure hydroxyapatite, with carbonate as the chief minor substituent. Fluoride has been shown to stimulate osteoblastic activity and inhibit osteoclastic resorption in vitro. CO(3)- and F-substituted apatite (CFA) has been considered as potential bone graft material for orthopedic and dental applications. The objective of this study was to determine the effects of simultaneously incorporated CO(3) and F on the crystallographic physico-chemical properties of apatite. The results showed that increasing CO(3) and Na content in apatites with relatively constant F concentration caused a decrease in crystallite size and an increase in the extent of calcium release; increasing F content in apatites with relatively constant CO(3) concentration caused an increase in crystallite size and a decrease in the extent of Ca release. These findings suggest that CFAs as bone graft materials of desired solubility can be prepared by manipulating the relative concentrations of CO(3) and F incorporated in the apatite.

Effects of green manure storage and incorporation methods on nitrogen release and N2O emissions after soil application

DEFF Research Database (Denmark)

Carter, Mette Sustmann; Sørensen, Peter; Petersen, Søren O.

2014-01-01

More efficient use of green manure-derived nitrogen (N) may improve crop yields and reduce environmental impacts in stockless organic arable farming. In this 3-month incubation study, we tested a new strategy where green manure leys are harvested and preserved until the following spring either...... as compost mixed with straw or as silage of harvested ley biomass. Grass-clover compost or silage was soil-incorporated by either simulated ploughing (green manure placed at 15 cm depth) or harrowing (green manure mixed into the upper 5-cm soil horizon) in order to assess treatment effects on net release...... total N. Possibly N2O production via denitrification was stimulated by oxygen-limited conditions near the decomposing silage. In contrast, compost incorporated by harrowing caused net N2O uptake, presumably an effect of reduced mineral N availability in this treatment. Overall, our study revealed...

Effect of incorporation of decorticated pigeon pea (Cajanus cajan) protein isolate on functional, baking and sensory characteristics of Wheat (Triticum aesitivum) biscuit

OpenAIRE

H. A. Hassan; A.I. Mustafa; A.R. Ahmed

2013-01-01

This study was undertaken with the objectives of using the decorticated pigeon pea protein isolate in the development of protein rich-biscuit, suitable for general and specific nutritional purposes and to study the effect of incorporation of pigeon pea protein isolate on the sensory evaluation and quality of biscuit produced. Decorticated Pigeon Pea protein Isolate (DPPI) was incorporated in wheat (Triticum aesitivum) flour (WF, extraction rate 72%), for making fortified biscuit. Ratios of DP...

Hypericum perforatum incorporated chitosan films as potential bioactive wound dressing material.

Science.gov (United States)

Güneş, Seda; Tıhmınlıoğlu, Funda

2017-09-01

Recent studies in wound dressing applications offer new therapies and promote wound healing process. The aim of this study was to develop Hypericum perforatum (St John's Wort) oil incorporated chitosan films for wound dressing applications. H. perforatum oil as a potential therapeutic agent was encapsulated in chitosan film to achieve a better wound dressing material. Oil incorporated chitosan films were successfully prepared by solvent casting method in different oil concentrations (0.25-1.5%v/v). Water vapor permeability (WVP), mechanical test, swelling behavior and surface hydrophobicity were performed in order to characterize the prepared films. Antimicrobial test was performed by disc diffusion method and the growth inhibition effects of the films including different amount of H. perforatum oil were investigated on Escherichia coli and Staphylococcus aureus. WVP increased with oil incorporation and the highest value was obtained for 0.25% oil concentration.The highest strain value was obtained in 0.25% oil content films although tensile stress decreased with increasing oil content. H. perforatum oil incorporated films had antimicrobial effect on both microorganisms. Chitosan based films had no cytotoxic effects on NIH3T3fibroblast cells and provided a good surface for cell attachment and proliferation. The results showed that the H. perforatum incorporated chitosan films seems to be a potential and novel biomaterial for wound healing applications. Copyright © 2017 Elsevier B.V. All rights reserved.

Effect of Rubidium Incorporation on the Structural, Electrical, and Photovoltaic Properties of Methylammonium Lead Iodide-Based Perovskite Solar Cells.

Science.gov (United States)

Park, Ik Jae; Seo, Seongrok; Park, Min Ah; Lee, Sangwook; Kim, Dong Hoe; Zhu, Kai; Shin, Hyunjung; Kim, Jin Young

2017-12-06

We report the electrical properties of rubidium-incorporated methylammonium lead iodide ((Rb x MA 1-x )PbI 3 ) films and the photovoltaic performance of (Rb x MA 1-x )PbI 3 film-based p-i-n-type perovskite solar cells (PSCs). The incorporation of a small amount of Rb + (x = 0.05) increases both the open circuit voltage (V oc ) and the short circuit photocurrent density (J sc ) of the PSCs, leading to an improved power conversion efficiency (PCE). However, a high fraction of Rb + incorporation (x = 0.1 and 0.2) decreases the J sc and thus the PCE, which is attributed to the phase segregation of the single tetragonal perovskite phase to a MA-rich tetragonal perovskite phase and a RbPbI 3 orthorhombic phase at high Rb fractions. Conductive atomic force microscopic and admittance spectroscopic analyses reveal that the single-phase (Rb 0.05 MA 0.95 )PbI 3 film has a high electrical conductivity because of a reduced deep-level trap density. We also found that Rb substitution enhances the diode characteristics of the PSC, as evidenced by the reduced reverse saturation current (J 0 ). The optimized (Rb x MA 1-x )PbI 3 PSCs exhibited a PCE of 18.8% with negligible hysteresis in the photocurrent-voltage curve. The results from this work enhance the understanding of the effect of Rb incorporation into organic-inorganic hybrid halide perovskites and enable the exploration of Rb-incorporated mixed perovskites for various applications, such as solar cells, photodetectors, and light-emitting diodes.

Effect of various amounts of nanosilver incorporation on the mechanical properties of resin modified glass-ionomer cement

Directory of Open Access Journals (Sweden)

Roza Haghgoo

2013-08-01

Full Text Available   Background and Aims: Metallic nano-particles show exclusive biological, chemical and physical characteristic. The purpose of this research was to evaluate the effect of various amounts of nanosilver incorporation (0 (as control, 20, 40, 80, 120, 200 ppm on the mechanical Properties ( compressive and flexural strength of resin modified Glass ionomer Cement.   Materials and Methods: Based on ISO 4049 and ISO 9971 for polyalkenoid cements, 90 cases in each group were prepared for the flexural and compressive strength. Specimens in 6 groups with different amounts of nanosilver (20, 40, 80, 120 and 200 ppm and control (Fuji II LC improved, stored in distilled water at 37 ° C for 1 day and 30 days. Flexural strength, using a three-point bending method, Modulus of elasticity and the compressive strength were measured by universal testing machine (Zwick with crosshead speed of 0.5 mm/min. Data were analyzed using two-way ANOVA and Tukey post HOC test.   Results: The flexural strength and modulus of various amounts of nanosilver incorporation of resin modified glass-ionomer cement were not significantly different (P>0.05. The compressive strength of incorporating of20 ppm compared with control (P=0.01, 40 ppm (P=0.02 and 80 ppm compared with control (P<0.001 were increased. The flexural strength and compressive strength of Fuji II LC, containing nanosilver particles were increased after 1 day and 1 month significantly (P<0.001.   Conclusion: Incorporation of 20 to 80 ppm nanosilver into Fuji II LC had increased mechanical properties compared to the original cement.

Lethal Effect on Bacterium of Decay of Incorporated Radioactive Atoms ({sup 3}H, {sup 14}C, {sup 32}P); Effet Letal de la Desintegration d'Atomes Radioactifs ({sup 3}H, {sup 14}C, {sup 32}P) Incorpores dans une Bacterie

Energy Technology Data Exchange (ETDEWEB)

Apelgot, Sonia [Laboratoire Curie, Institut du Radium, Paris (France)

1968-06-15

The biological effect of decay of {sup 3}H, {sup 14}C and {sup 32}P incorporated into a bacterium depends on the nature of the organic molecule labelled, on the position of the isotope within it and on the isotope itself. In sum, results obtained to date show that: The decay of {sup 3}H atoms incorporated into certain macromolecules of a bacterium causes sterilization through ionization by the ss{sup -} particle emitted; transmutation is of negligible importance. This self-irradiation is comparable in effect with X-rays and is affected in a similar manner by the same factors: temperature, presence of a radioprotector, radiosensitivity of the strain. Decay of {sup 14}C or {sup 32}P atoms incorporated into bacterial DNA is lethal because of the transmutation effect; ionizations produced by emitted ss{sup -} particles may be disregarded. Survival curves for {sup 32}P transmutations depend on the experimental conditions. Some of the results obtained with {sup 32}P are similar to those obtained with X-rays, e.g. effects of temperature, radical capture and oxygen, while others are similar to those of u.v. light, e.g., effect of growth conditions. Comparative tests made with {sup 32}P indicate that the recoil energy of transmutation is not the phenomenon responsible for the lethal effect observed. Comparison of the results obtained after X-irradiation or decay of {sup 3}H or {sup 32}P incorporated into the DNA of bacteria of the same strain of E. coli shows that the efficiency of a {sup 32}P transmutation is about four times greater than that of an ionization produced at random within the same DNA. (author) [French] L'effet biologique de la desintegration de {sup 3}H, {sup 14}C et {sup 32}P incorpores dans une bacterie depend de la nature de la molecule organique marquee, de l'emplacement de l'isotope sur celle-ci et de la nature de l'isotope lui-meme. L'ensemble des resultats obtenus a ce jour montre que la desintegration des atomes de {sup 3}H incorpores dans certaines

Incorporating hydrologic variability into nutrient spiraling

Science.gov (United States)

Doyle, Martin W.

2005-09-01

Nutrient spiraling describes the path of a nutrient molecule within a stream ecosystem, combining the biochemical cycling processes with the downstream driving force of stream discharge. To date, nutrient spiraling approaches have been hampered by their inability to deal with fluctuating flows, as most studies have characterized nutrient retention within only a small range of discharges near base flow. Here hydrologic variability is incorporated into nutrient spiraling theory by drawing on the fluvial geomorphic concept of effective discharge. The effective discharge for nutrient retention is proposed to be that discharge which, over long periods of time, is responsible for the greatest portion of nutrient retention. A developed analytical model predicts that the effective discharge for nutrient retention will equal the modal discharge for small streams or those with little discharge variability. As modal discharge increases or discharge variability increases, the effective discharge becomes increasingly less than the modal discharge. In addition to the effective discharge, a new metric is proposed, the functionally equivalent discharge, which is the single discharge that will reproduce the magnitude of nutrient retention generated by the full hydrologic frequency distribution when all discharge takes place at that rate. The functionally equivalent discharge was found to be the same as the modal discharge at low hydrologic variability, but increasingly different from the modal discharge at large hydrologic variability. The functionally equivalent discharge provides a simple quantitative means of incorporating hydrologic variability into long-term nutrient budgets.

Effects of dietary fat on lipid composition of serum and erythrocytes of the swine and in vitro incorporation of fatty acids into erythrocyte membranes

International Nuclear Information System (INIS)

Sato, Hiroaki

1974-01-01

Changes in ftty acid patterns of lipids in serum and erythrocytes induced by dietary fats and in vitro incorporation of fatty acids into erythrocyte membranes were investigated with pigs. On feeding various diets, it was found that fatty acid composition of serum and erythrocytes could be modified and altered toward the fatty acid pattern of the diet. In vitro, the incorporation of labelled fatty acids into erythrocyte membranes was accelerated by the addition of cofactors such as lysolecithin, CoA and ATP. Dietary fats also had certain effects on the incorporation of fatty acids into erythrocyte membranes. Erythrocytes, collected from the blood of pigs fed corn oil, incorporated and also released more labelled linoleate than those of pigs fed hydrogenated soybean oil. Palmitic acid was more slowly incorporated into erythrocyte membranes than linoleic acid in the pigs fed both a commercial chow and scheduled meals, indicating selective esterification of fatty acids in the erythrocyte membranes. (author)

Effects of piracetam on the incorporation of 32P into the phospholipids of neurons and glial cells isolated from rabbit cerebral cortex

International Nuclear Information System (INIS)

Woelk, H.

1979-01-01

In the search for the biochemical basis of the action of Piracetam, the effects of this encephalotropic substance on the neuronal and glial phospholipid metabolism was investigated. Piracetam increases the incorporation of 32 P into phosphatidylinositol and phosphatidyl choline of both glia and neuronal cell bodies. When taking the important role of phosphatidylinoitol in the processes of synaptic transmission and axonal conduction into consideration, the data obtained in the present work suggest that piracetam may stimulate excitatory neurons and may be involved in the process of synaptic transmission. The stimulatory effect of piracetam on the incorporation of 32 P into phosphatidylinositol and phosphatidyl choline appears to be mediated by norepinephrine or another neurotransmitter. (orig.) [de

Calculated activity incorporated in the therapy with I131

International Nuclear Information System (INIS)

Chica, L.G.; Puerta, J.A.

1998-01-01

By means of the product S(T→ S).A s (T e ), the absorbed dose to thyroid delivered by I 131 incorporated is calculated. Where S(T→ S) is the absorbed dose in the thyroid per nuclear transformation (tn.) of I 131 localized in the thyroid and as a potential function of the mass is expressed. A s (T e ) is the number of tn. of I 131 in the thyroid since the moment of the incorporation until the time T e (the effective middle time); to find A s (T e ) to normal as different pathological conditions, the metabolic model of the iodo proposed by the ICRP is used. Of the expressions of the doses, the incorporated activity, l o , is obtained

Modulation of the effective work function of a TiN metal gate for NMOS requisition with Al incorporation

International Nuclear Information System (INIS)

Han Kai; Ma Xueli; Yang Hong; Wang Wenwu

2013-01-01

The effect of Al incorporation on the effective work function (EWF) of TiN metal gate was systematically investigated. Metal—oxide—semiconductor (MOS) capacitors with W/TiN/Al/TiN gate stacks were used to fulfill this purpose. Different thickness ratios of Al to TiN and different post metal annealing (PMA) conditions were employed. Significant shift of work function towards to Si conduction band was observed, which was suitable for NMOS and the magnitude of shift depends on the processing conditions. (semiconductor technology)

Microstructural analysis of clayey ceramic incorporated with fluorescent lamp glass

International Nuclear Information System (INIS)

Morais, A.S.C.; Caldas, T.C.C.; Pereira, P.S.; Monteiro, S.N.; Vieira, C.M.F.

2011-01-01

This study aims to evaluate the effect of the incorporation of glass powder fluorescent lamp, from a decontamination process, in the microstructure of clayey ceramic. Formulations were prepared with incorporation of the waste in amounts of up to 10 wt.% into the clayey body. Specimens were prepared by uniaxial mold-press at 20 MPa and then fired at 850 and 1050°C. After firing, the microstructure of the ceramics was evaluated by optical microscopy (OM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results showed that the incorporation of glass powder into the clayey body changes the microstructure of the ceramics. (author)

Stimulation effect of synthetic cytokinins on the uptake and incorporation of nitrogen-15-labelled ammonium nitrate and urea in wheat leaves

International Nuclear Information System (INIS)

Iglewski, S.M.; Szarvas, T.; Pozsar, B.I.

1977-01-01

The turnover of different labelled nitrogen sources in wheat leaves has been investigated using the isotopic tracer technique. The 15 N at.% was determined in free ammonium ion, in the nitrate and the nitrite levels, and also in the non-disintegrated urea. The accumulation and the incorporation of stable nitrogen was measured in the TCA insoluble protein fraction. According to the experimental data the intensity of incorporation of urea nitrogen is relatively higher than that of the different inorganic compounds. The utilization of ammonium ion was 76% compared with the urea, whereas that of the nitrate nitrogen was 60% in the wheat leaves. The incorporation rate of the two nitrogen atoms from ammonium nitrate was 32% lower than that of the urea nitrogen, in the leaf protein of Bezostaia-1 wheat variety. The turnover of urea through the transamination was very rapid, the amination with ammonium ion was slower, and the first phase of the nitrate reduction was relatively more retarded than the nitrite reduction. The endogenous cytokinin-like biological activity and some synthetic cytokinins (kinetin, benzyladenine) have a remarkably stimulating effect on the incorporation of the different 15 N-labelled nitrogen sources into the leaf protein fraction. (author)

Comparison in the calculation of committed effective dose using the ICRP 30 and ICRP 60 models for a repeated incorporation by inhalation of I-125

International Nuclear Information System (INIS)

Carreno P, A.L.; Cortes C, A.; Alonso V, G.; Serrano P, F.

2005-01-01

Presently work, a comparison in the calculation of committed effective dose using the models of the ICRP 30 and those of the ICRP 60 for the analysis of internal dose due to repeated incorporation of I-125 is shown. The estimations of incorporated activity are obtained starting from the proportionate data for an exercise of inter comparison, with which it should be determined the internal dose later on. For to estimate the initial activity incorporated by repeated dose was assumed that this it was given through of multiple individual incorporations which happened in the middle points of the monitoring periods. The results using the models of the ICRP 30 and of the ICRP 60 are compared and the causes of the differences are analyzed. (Author)

Cost-effective bioregeneration of nitrate-laden ion exchange brine through deliberate bicarbonate incorporation.

Science.gov (United States)

Li, Qi; Huang, Bin; Chen, Xin; Shi, Yi

2015-05-15

Bioregeneration of nitrate-laden ion exchange brine is desired to minimize its environmental impacts, but faces common challenges, i.e., enriching sufficient salt-tolerant denitrifying bacteria and stabilizing brine salinity and alkalinity for stable brine biotreatment and economically removing undesired organics derived in biotreatment. Incorporation of 0.25 M bicarbonate in 0.5 M chloride brine little affected resin regeneration but created a benign alkaline condition to favor bio-based brine regeneration. The first-quarter sulfate-mainly enriched spent brine (SB) was acidified with carbon source acetic acid for using CaCl2 at an efficiency >80% to remove sulfate. Residual Ca(2+) was limited below 2 mM by re-mixing the first-quarter and remained SB to favor denitrification. Under [Formula: see text] system buffered pH condition (8.3-8.8), nitrate was removed at 0.90 gN/L/d by hematite-enriched well-settled activated sludge (SVI 8.5 ml/g) and the biogenic alkalinity was retained as bicarbonate. The biogenic alkalinity met the need of alkalinity in removing residual Ca(2+) after sulfate removal and in CaCl2-induced CaCO3 flocculation to remove 63% of soluble organic carbon (SOC) in biotreated brine. Carbon-limited denitrification was also operated after activated sludge acclimation with sulfide to cut SOC formation during denitrification. Overall, this bicarbonate-incorporation approach, stabilizing the brine salinity and alkalinity for stable denitrification and economical removal of undesired SOC, suits long-term cost-effective brine bioregeneration. Copyright © 2015 Elsevier Ltd. All rights reserved.

Audit incorporating avoidability and appropriate intervention can ...

African Journals Online (AJOL)

Audit incorporating avoidability and appropriate intervention can significantly decrease perinatal mortality. H. R. G. Ward, G. R. Howarth, O. J. N. Jennings,. R. C. Pattinson .... 6 months) and seven interns. The study was .... maternity care notes study: a randomized control trial to assess the effects of giving expectant mothers ...

Incorporating direct marketing activity into latent attrition models

NARCIS (Netherlands)

Schweidel, David A.; Knox, George

2013-01-01

When defection is unobserved, latent attrition models provide useful insights about customer behavior and accurate forecasts of customer value. Yet extant models ignore direct marketing efforts. Response models incorporate the effects of direct marketing, but because they ignore latent attrition,

Green chemical incorporation of sulphate into polyoxoanions of ...

Indian Academy of Sciences (India)

Green chemical incorporation of sulphate into polyoxoanions of molybdenum to nano level ... Keywords. Polyoxometalate; green synthesis; nanostructures; surfactant. ... The effects of reaction parameters such as concentration of surfactant, temperature and pH of solution on the synthesis of nanospheres were investigated.

Development and electrochemical characterization of Ni‐P coated tungsten incorporated electroless nickel coatings

Energy Technology Data Exchange (ETDEWEB)

Shibli, S.M.A., E-mail: smashibli@yahoo.com; Chinchu, K.S.

2016-08-01

Ni‐P-W alloy and composite coatings were prepared by incorporation of sodium tungstate/tungsten and Ni‐P coated tungsten into electroless nickel bath respectively. Good inter-particle interactions among the depositing elements i.e. Ni and P with the incorporating tungsten particles were achieved by means of pre-coated tungsten particle by electroless nickel covering prior to its addition into the electroless bath. The pre-coated tungsten particles got incorporated uniformly into the Ni-P matrix of the coating. The particles and the coatings were characterized at different stages by different techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). The electroless Ni-P coating incorporated with pre-coated tungsten exhibited considerably high hardness, thickness and deposition rate. The performance and corrosion resistance characteristics of the composite coating incorporated with the nickel coated tungsten were found to be superior over other conventional Ni-P-W ternary alloy coatings currently reported. - Highlights: • An amorphous Ni-P coating was effectively formed on tungsten particles. • Electroless ternary Ni-P-W composite coatings were successfully prepared. • Enhancement in the inter-particle interaction in the Ni-P composite matrix was achieved. • Efficient and uniform incorporation of the composite in the internal layer was evident. • The tungsten incorporated coating possessed effective barrier protection.

Model for incorporating fuel swelling and clad shrinkage effects in diffusion theory calculations (LWBR Development Program)

International Nuclear Information System (INIS)

Schick, W.C. Jr.; Milani, S.; Duncombe, E.

1980-03-01

A model has been devised for incorporating into the thermal feedback procedure of the PDQ few-group diffusion theory computer program the explicit calculation of depletion and temperature dependent fuel-rod shrinkage and swelling at each mesh point. The model determines the effect on reactivity of the change in hydrogen concentration caused by the variation in coolant channel area as the rods contract and expand. The calculation of fuel temperature, and hence of Doppler-broadened cross sections, is improved by correcting the heat transfer coefficient of the fuel-clad gap for the effects of clad creep, fuel densification and swelling, and release of fission-product gases into the gap. An approximate calculation of clad stress is also included in the model

Enhanced incorporation of radioactive inorganic phosphate into phospholipids of HeLa cells by tumor promoters

International Nuclear Information System (INIS)

Nishino, H.; Fujiki, H.; Terada, M.; Sato, S.

1983-01-01

Teleocidin, a new tumor promoter, increased incorporation of radioactive inorganic phosphate ( 32 P/sub i/) into phospholipids in HeLa cells. This effect was detected within 1 h on incubation of the cells in medium containing teleocidin. The half-maximum effective dose of teleocidin was approximately 10 ng/ml. The main effect of teleocidin was on the incorporation of 32 P/sub i/ into the phosphatidylcholine fraction, with a lesser effect on 32 P/sub i/ incorporation into other phospholipid fractions. Increased incorporation of 32 P/sub i/ into phospholipids was also observed on incubation of the cells with 12-O-tetradecanoylphorbol-13-acetate (TPA), dihydroteleocidin B, or lyngbyatoxin A, which are all complete tumor promoters, and also with mezerein, which is an incomplete and second stage promoter. On the other hand, at concentrations of up to 1 microgram/ml, 4-O-methyl TPA and C/sub a/ 2 + ionophore A23187, which are incomplete and first stage promoters, and phorbol, which has no promoting activity in skin carcinogenesis, did not cause any increased incorporation of 32 P/sub i/ into phospholipid fractions of HeLa cells

Timing incorporation of different green manure crops to minimize the risk of nitrogen leaching

Directory of Open Access Journals (Sweden)

H. KÄNKÄNEN

2008-12-01

Full Text Available Seven field trials at four research sites were carried out to study the effect of incorporation time of different plant materials on soil mineral N content during two successive seasons. Annual hairy vetch (Vicia villosa Roth, red clover (Trifolium pratense L., westerwold ryegrass (Lolium multiflorum Lam. var. westerwoldicum and straw residues of N-fertilized spring barley (Hordeum vulgare were incorporated into the soil by ploughing in early September, late October and the following May, and by reduced tillage in May. Delaying incorporation of the green manure crop in autumn lessened the risk of N leaching. The higher the crop N and soil NO3-N content, the greater the risk of leaching. Incorporation in the following spring, which lessened the risk of N leaching as compared with early autumn ploughing, often had an adverse effect on the growth of the succeeding crop. After spring barley, the NO3-N content of the soil tended to be high, but the timing of incorporation did not have a marked effect on soil N. With exceptionally high soil mineral N content, N leaching was best inhibited by growing westerwold ryegrass in the first experimental year. ;

Incorporation of metal nanoparticles into wood substrate and methods

Science.gov (United States)

Rector, Kirk D; Lucas, Marcel

2015-11-04

Metal nanoparticles were incorporated into wood. Ionic liquids were used to expand the wood cell wall structure for nanoparticle incorporation into the cell wall structure. Nanoparticles of elemental gold or silver were found to be effective surface enhanced Raman spectroscopy (SERS) imaging contrast or sensing agents. Nanoparticles of elemental iron were found to be efficient microwave absorbers and caused localized heating for disrupting the integrity of the lignocellulosic matrix. Controls suggest that the localized heating around the iron nanoparticles reduces losses of cellulose in the form of water, volatiles and CO.sub.2. The ionic liquid is needed during the incorporation process at room temperature. The use of small amounts of ionic liquid combined with the absence of an ionic liquid purification step and a lower energy and water use are expected to reduce costs in an up-scaled pretreatment process.

Effect on days of lactation and methionine hydroxy analog on incorporation of plasma fatty acids into plasma triglycerides

International Nuclear Information System (INIS)

Pullen, D.L.; Emergy, R.S.; Palmquist, D.L.

1989-01-01

Methionine hydroxy analog has been proposed to stimulate hepatic lipoprotein synthesis and incorporation of plasma fatty acids into plasma triglyceride. Seven cows were fed diets containing 0 to 30 g analog/d starting 14 d prepartum. At approximately 30 and 60 d postpartum, cows were continuously infused intravenously with 1-[ 14 C]palmitic acid for 160 min to achieve steady-state labeling of plasma fatty acid and triglyceride. Turnover of fatty acid and transfer quotients for triglyceride and CO 2 were 3.3 an 2.7 mmol min -1 ; 13.0 and 10.0%; and 8.0 and 5.0%, for control and analog, respectively. Proportion of fatty acid turnover incorporated into triglyceride and CO 2 were 14.0 and 15.0%; and 21.0 and 18.0, respectively, for control and analog. Analog increased 14 C recovered in milk fat (52 vs. 36%). Plasma concentration of fatty acids, percent oxidized to CO 2 , and percent of CO 2 from fatty acids decreased with increasing lactation days. Milk fat percent and yield fatty acid turnover, and oxidation were positively correlated with concentration of plasma fatty acids, whereas fatty acid incorporated into plasma triglyceride was negatively correlated with fatty acid concentration. The data suggest that hepatic triglyceride secretion is not increased in early lactation; further, no effects of analog on lipid metabolism were detected

Luminescence enhancement of ZnO-poly(methylmethacrylate) nanocomposite films by incorporation of crystalline BaTiO_3 nanoparticles

International Nuclear Information System (INIS)

Kanamori, Tsuyoshi; Han, Yu; Nagao, Daisuke; Kamezawa, Nao; Ishii, Haruyuki; Konno, Mikio

2016-01-01

Highlights: • Dielectric barium titanate (BT) nanoparticles incorporated into luminescence films. • Luminescence intensities increased by the BT nanoparticle incorporation. • Incorporation of highly dielectric nanoparticles effective for luminescence enhancement. - Abstract: Incorporation of highly dielectric nanoparticles into luminescent ZnO-polymethylmethacrylate (PMMA) nanocomposite films was undertaken to examine the effect of nanoparticle incorporation on luminescence intensity of the nanocomposite films. ZnO nanoparticles were prepared as inorganic phosphors by a precipitation method. The ZnO nanoparticles were then surface-modified with 3-methacryloxypropyltrimethoxysilane (MPTMS) to be used for fabrication of the ZnO-PMMA nanocomposite film. Barium titanate (BT) nanoparticles were synthesized with a sol-gel method as the highly dielectric nanoparticles, which were also surface-modified with the MPTMS for the incorporation into the nanocomposite films. Luminescence intensity of the nanocomposite films was successfully increased by the nanoparticle incorporation up to a BT content around 15 vol%. The luminescence intensity higher than that measured for the nanocomposite films incorporating SiO_2 nanoparticles indicated that the incorporation of highly dielectric nanoparticles was an effective approach to enhance the luminescence of ZnO nanoparticles in the polymer thin films.

Junctionless Thin-Film Transistors Gated by an H₃PO₄-Incorporated Chitosan Proton Conductor.

Science.gov (United States)

Liu, Huixuan; Xun, Damao

2018-04-01

We fabricated an H3PO4-incorporated chitosan proton conductor film that exhibited the electric double layer effect and showed a high specific capacitance of 4.42 μF/cm2. Transparent indium tin oxide thin-film transistors gated by H3PO4-incorporated chitosan films were fabricated by sputtering through a shadow mask. The operating voltage was as low as 1.2 V because of the high specific capacitance of the H3PO4-incorporated chitosan dielectrics. The junctionless transparent indium tin oxide thin film transistors exhibited good performance, including an estimated current on/off ratio and field-effect mobility of 1.2 × 106 and 6.63 cm2V-1s-1, respectively. These low-voltage thin-film electric-double-layer transistors gated by H3PO4-incorporated chitosan are promising for next generation battery-powered "see-through" portable sensors.

Investigation into the Effect of Sulfate and Borate Incorporation on the Structure and Properties of SrFeO3-δ

Directory of Open Access Journals (Sweden)

Abbey Jarvis

2017-06-01

Full Text Available In this paper, we demonstrate the successful incorporation of sulfate and borate into SrFeO3-δ, and characterise the effect on the structure and conductivity, with a view to possible utilisation as a cathode material in Solid Oxide Fuel Cells. The incorporation of low levels of sulfate/borate is sufficient to cause a change from a tetragonal to a cubic cell. Moreover, whereas heat treatment of undoped SrFeO3-δ under N2 leads to a transformation to brownmillerite Sr2Fe2O5 with oxygen vacancy ordering, the sulfate/borate-doped samples remain cubic under the same conditions. Thus, sulfate/borate doping appears to be successful in introducing oxide ion vacancy disorder in this system.

Effect of hypoxia on the incorporation of [2-3H] glycerol and [1-14C[-palmitate into lipids of various brain regions

International Nuclear Information System (INIS)

Alberghina, M.; Giuffrida, A.M.

1981-01-01

The lipid metabolism in guinea pig brain after intermittent hypoxia, prolonged for 80 hrs, was markedly impaired. The in vivo incorporation of [2-3H] glycerol and [1-14C] palmitate into lipids of microsomes, mitochondria, myelin, and synaptosomes, purified form cerebral hemispheres, was significantly lower in the hypoxic animals than in the controls. The same effect was observed on the incorporation of labeled precursors into lipids of mitochondria purified from cerebellum and brainstem. In particular, the labeling of th major phospholipids present - ie, phosphatidylcholine (PC) and phosphatidylethanolamine (PE) - in the mitochondria of the three brain regions examined decreased after hypoxic treatment

Numeral Incorporation in Japanese Sign Language

Science.gov (United States)

Ktejik, Mish

2013-01-01

This article explores the morphological process of numeral incorporation in Japanese Sign Language. Numeral incorporation is defined and the available research on numeral incorporation in signed language is discussed. The numeral signs in Japanese Sign Language are then introduced and followed by an explanation of the numeral morphemes which are…

A new look at the decomposition of agricultural productivity growth incorporating weather effects.

Science.gov (United States)

Njuki, Eric; Bravo-Ureta, Boris E; O'Donnell, Christopher J

2018-01-01

Random fluctuations in temperature and precipitation have substantial impacts on agricultural output. However, the contribution of these changing configurations in weather to total factor productivity (TFP) growth has not been addressed explicitly in econometric analyses. Thus, the key objective of this study is to quantify and to investigate the role of changing weather patterns in explaining yearly fluctuations in TFP. For this purpose, we define TFP to be a measure of total output divided by a measure of total input. We estimate a stochastic production frontier model using U.S. state-level agricultural data incorporating growing season temperature and precipitation, and intra-annual standard deviations of temperature and precipitation for the period 1960-2004. We use the estimated parameters of the model to compute a TFP index that has good axiomatic properties. We then decompose TFP growth in each state into weather effects, technological progress, technical efficiency, and scale-mix efficiency changes. This approach improves our understanding of the role of different components of TFP in agricultural productivity growth. We find that annual TFP growth averaged 1.56% between 1960 and 2004. Moreover, we observe substantial heterogeneity in weather effects across states and over time.

Effectiveness of strategies incorporating training and support of traditional birth attendants on perinatal and maternal mortality: meta-analysis.

Science.gov (United States)

Wilson, Amie; Gallos, Ioannis D; Plana, Nieves; Lissauer, David; Khan, Khalid S; Zamora, Javier; MacArthur, Christine; Coomarasamy, Arri

2011-12-01

To assess the effectiveness of strategies incorporating training and support of traditional birth attendants on the outcomes of perinatal, neonatal, and maternal death in developing countries. Systematic review with meta-analysis. Medline, Embase, the Allied and Complementary Medicine database, British Nursing Index, Cochrane Library, Cumulative Index to Nursing and Allied Health Literature, BioMed Central, PsycINFO, Latin American and Caribbean Health Sciences Literature database, African Index Medicus, Web of Science, Reproductive Health Library, and Science Citation Index (from inception to April 2011), without language restrictions. Search terms were "birth attend*", "traditional midwife", "lay birth attendant", "dais", and "comadronas". Review methods We selected randomised and non-randomised controlled studies with outcomes of perinatal, neonatal, and maternal mortality. Two independent reviewers undertook data extraction. We pooled relative risks separately for the randomised and non-randomised controlled studies, using a random effects model. We identified six cluster randomised controlled trials (n=138 549) and seven non-randomised controlled studies (n=72 225) that investigated strategies incorporating training and support of traditional birth attendants. All six randomised controlled trials found a reduction in adverse perinatal outcomes; our meta-analysis showed significant reductions in perinatal death (relative risk 0.76, 95% confidence interval 0.64 to 0.88, Ptraditional birth attendants.

Effect of incorporation of fermented bamboo shoot on physicochemical and microbial quality of pork pickle.

Science.gov (United States)

Chavhan, D M; Hazarika, M; Brahma, M L; Hazarika, R A; Rahman, Z

2015-02-01

Replacement of commercial chemical preservative (Vinegar) by incorporating fermented bamboo shoot (FBS) products partially or completely and their effect on physicochemical, microbial and shelf life qualities on pork pickle products was studied. Different FBS products such as FBS extract, paste and powder were incorporated in the pork pickle products at the level of 50 to 100 % with or without vinegar and stored at room temperature for 90 days. Highest pH values and lowest titrable acidity was recorded in products with 50 and 100 % FBS powder. No significant differences were observed with respect to proximate composition i.e. percent moisture, protein, fat and ash contents among the products except the product with 100 % FBS powder which had significantly (p acid (TBA) values were found to be increasing as the storage periods were advancing. Except the product with 100 % FBS powder which could be stored for 30 days only, other products could be stored upto 90 days without any physicochemical and microbial problems. It can be concluded from this study that natural and organic FBS extract and paste can be used successfully replacing the conventional chemical preservative (Vinegar) for preparation of pork pickle products and preserved more than 90 days at room temperature. However, FBS powder can be used for preservation of the pickle products for a short period (30 days).

Physicochemical and Antioxidant Properties of Chitosan Films Incorporated with Cinnamon Oil

Directory of Open Access Journals (Sweden)

Marco A. López-Mata

2015-01-01

Full Text Available Chitosan films (CF with cinnamon bark oil (CO incorporated at 0% (control, 0.25%, 0.5%, and 1.0% v/v were prepared by an emulsion method. The films were characterized based on their physical properties (solubility, water vapor permeability, optical property, and microstructure and antioxidant properties (DPPH, ABTS, and its protective effects on human erythrocytes. The results showed that the incorporation of 0.5 and 1.0% of CO into the CF significantly decreased its solubility to 22% of the control (p<0.05. The water vapor permeability of the CF-CO was significantly reduced to 40% with low concentrations of CO (0.25% incorporated into the CF. In general, the films presented a yellow coloration and an increase in transparency with the incorporation of CO into the CF. It was also observed that the incorporation of CO increased the antioxidant activity between 6.0-fold and 14.5-fold compared to the control, and the protective capacity against erythrocyte hemolysis increased by as much as 80%.

Incorporation of Ba in Al and Fe pollucite

Energy Technology Data Exchange (ETDEWEB)

Vance, Eric R., E-mail: erv@ansto.gov.au [Institute of Materials Engineering, Australian Nuclear Science and Technology Organisation, Locked Bag 2001 Kirrawee DC, NSW 2232 (Australia); Gregg, Daniel J.; Griffiths, Grant J. [Institute of Materials Engineering, Australian Nuclear Science and Technology Organisation, Locked Bag 2001 Kirrawee DC, NSW 2232 (Australia); Gaugliardo, Paul R. [Centre for Microscopy, Characterisation and Analysis, The University of Western Australia, Crawley, WA 6009 (Australia); Grant, Charmaine [Institute of Materials Engineering, Australian Nuclear Science and Technology Organisation, Locked Bag 2001 Kirrawee DC, NSW 2232 (Australia)

2016-09-15

Ba, the transmutation product of radioactive Cs, can be incorporated at levels of up to ∼0.07 formula units in Cs{sub (1−2x)}Ba{sub x}AlSi{sub 2}O{sub 6} aluminium pollucite formed by sol-gel methods and sintering at 1400 °C, with more Ba forming BaAl{sub 2}Si{sub 2}O{sub 8} phases. The effect of Ba substitution in pollucite-structured CsFeSi{sub 2}O{sub 6} was also studied and no evidence of Ba substitution in the pollucite structure via cation vacancies or Fe{sup 2+} formation was obtained. The Ba entered a Fe-silicate glass structure. Charge compensation was also attempted with a Cs{sup +} + Fe{sup 3+} ↔ Ba{sup 2+} + Ni{sup 2+} scheme but again the Ba formed a glass and NiO was evident. PCT leaching data showed CsFeSi{sub 2}O{sub 6} to be very leach resistant. - Highlights: • Barium can be incorporated into aluminium pollucite. • Positron annihilation lifetime spectroscopy supports a charge vacancy mechanism of incorporation. • Iron pollucite does not appear to incorporate any barium with either vacancy or charge compensation mechanisms. • Leaching data suggest iron pollucite is very leach resistant.

Effect of biostimulator on the incorporation of DL(1-14C)leucine into skeletal muscle proteins of buffalo

International Nuclear Information System (INIS)

Nath, N.C.; Singh, L.N.

1982-01-01

Incorporation of 14 C-leucine into muscle proteins of buffalo calves was studied in vitro using muscle fibre preparations from biceps femoris. Biostimulator (a spleen tissue extract) stimulated the incorporation of 14 C-leucine into total proteins to some extent, but inhibited the synthesis of sarcoplasmic proteins. There was no significant difference in the relative proportion of the individual sarcoplasmic and myofibrillar proteins in the presence or absence of biostimulator. In one major sarcoplasmic protein there was higher specific activity in the presence of biostimulator. In all the remaining 4 proteins the incorporation was inhibited. Among the myofibrillar proteins, the incorporation into troponins, myosin light chains and tropomyosin was stimulated in the presence of biostimulator. Myosin heavy chain and acting did not show any change in incorporation of 14 C-leucine after addition of the biostimulator. (author)

Measurement of trifluralin volatilization in the field: Relation to soil residue and effect of soil incorporation

International Nuclear Information System (INIS)

Bedos, C.; Rousseau-Djabri, M.F.; Gabrielle, B.; Flura, D.; Durand, B.; Barriuso, E.; Cellier, P.

2006-01-01

Volatilization may represent a major dissipation pathway for pesticides applied to soils or crops. A field experiment (September, 2002), consisted in volatilization fluxes measurements during 6 days, covering the periods before and after soil incorporation carried out 24 h after trifluralin spraying on bare soil. Evolution of concentration in soil was measured during 101 days, together with soil physical and meteorological variables. Volatilization fluxes were very high immediately after application (1900 ng m -2 s -1 ), decreased down to 100 ng m -2 s -1 in the following 24 h. Soil incorporation strongly abated trifluralin concentration in the air. 99% of the total volatilization losses recorded over the 6 days following application occurred before incorporation. Volatilization fluxes evidenced a diurnal cycle driven by environmental conditions. Soil trifluralin residues could still be quantified 101 days after application. Our results highlight the caution required when using soil degradation half-life values in the field for volatile compounds. - Losses by volatilization contribute significantly to soil dissipation of the herbicide trifluralin before its soil incorporation

Effect of the incorporation of modified purified clay with different content surfactants in the thermal and mechanical PET nanocomposites

International Nuclear Information System (INIS)

Leite, Itamara F.; Soares, Anna P.S.; Silva, Suedina M.L.; Malta, Oscar M.L.

2011-01-01

An organically modified bentonite purified with different amounts of alkyl ammonium salts and alkyl phosphonium was used as filler in the preparation of nanocomposites of poly(ethylene terephthalate) (PET). PET/organophilic bentonite masterbatch were prepared in a Haake torque rheometer at 260° C, 60 rpm for 10min. Then, the master batch obtained were mixed with PET in quantities necessary to obtain the nominal content of 1 wt% of bentonite, a twin screw extruder counter-rotating to 275°C in all heating zones and 60 rpm. Subsequently, the mixtures were injected (Arburg All Rounder), in the form of tensile specimens (ASTM D638). The effect of incorporating this type of filler on thermal and mechanical properties of nanocomposites of PET will be investigated. The incorporation of different types of organoclay to PET resulted in intercalated nanocomposites and partially exfoliated. The intercalated morphology showed higher thermal stability. (author)

Luminescence enhancement of ZnO-poly(methylmethacrylate) nanocomposite films by incorporation of crystalline BaTiO{sub 3} nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Kanamori, Tsuyoshi; Han, Yu; Nagao, Daisuke, E-mail: dnagao@tohoku.ac.jp; Kamezawa, Nao; Ishii, Haruyuki; Konno, Mikio

2016-09-15

Highlights: • Dielectric barium titanate (BT) nanoparticles incorporated into luminescence films. • Luminescence intensities increased by the BT nanoparticle incorporation. • Incorporation of highly dielectric nanoparticles effective for luminescence enhancement. - Abstract: Incorporation of highly dielectric nanoparticles into luminescent ZnO-polymethylmethacrylate (PMMA) nanocomposite films was undertaken to examine the effect of nanoparticle incorporation on luminescence intensity of the nanocomposite films. ZnO nanoparticles were prepared as inorganic phosphors by a precipitation method. The ZnO nanoparticles were then surface-modified with 3-methacryloxypropyltrimethoxysilane (MPTMS) to be used for fabrication of the ZnO-PMMA nanocomposite film. Barium titanate (BT) nanoparticles were synthesized with a sol-gel method as the highly dielectric nanoparticles, which were also surface-modified with the MPTMS for the incorporation into the nanocomposite films. Luminescence intensity of the nanocomposite films was successfully increased by the nanoparticle incorporation up to a BT content around 15 vol%. The luminescence intensity higher than that measured for the nanocomposite films incorporating SiO{sub 2} nanoparticles indicated that the incorporation of highly dielectric nanoparticles was an effective approach to enhance the luminescence of ZnO nanoparticles in the polymer thin films.

Blocking of indium incorporation by antimony in III-V-Sb nanostructures

International Nuclear Information System (INIS)

Sanchez, A M; Beltran, A M; Ben, T; Molina, S I; Beanland, R; Gass, M H; De la Pena, F; Walls, M; Taboada, A G; Ripalda, J M

2010-01-01

The addition of antimony to III-V nanostructures is expected to give greater freedom in bandgap engineering for device applications. One of the main challenges to overcome is the effect of indium and antimony surface segregation. Using several very high resolution analysis techniques we clearly demonstrate blocking of indium incorporation by antimony. Furthermore, indium incorporation resumes when the antimony concentration drops below a critical level. This leads to major differences between nominal and actual structures.

Incorporating solar home system for smart grid application

NARCIS (Netherlands)

Alipuria, B.; Asare-Bediako, B.; Groot, de R.J.W.; Sarker, M.J.; Slootweg, J.G.; Kling, W.L.

2012-01-01

Smart Grids have been one of the prime focuses of studies for the past few years on power systems. The goal is to make the power infrastructure more reliable and effective to cater for the needs of the future. Another goal for improving the power infrastructure is to incorporate renewable energy

Incorporating A Structured Writing Process into Existing CLS Curricula.

Science.gov (United States)

Honeycutt, Karen; Latshaw, Sandra

2014-01-01

Good communication and critical thinking are essential skills for all successful professionals, including Clinical Laboratory Science/Medical Laboratory Science (CLS/MLS) practitioners. Professional programs can incorporate writing assignments into their curricula to improve student written communication and critical thinking skills. Clearly defined, scenario-focused writing assignments provide student practice in clearly articulating responses to proposed problems or situations, researching and utilizing informational resources, and applying and synthesizing relevant information. Assessment rubrics, structured feedback, and revision writing methodologies help guide students through the writing process. This article describes how a CLS Program in a public academic medical center, located in the central United States (US) serving five centrally-located US states has incorporated writing intensive assignments into an existing 11-month academic year using formal, informal and reflective writing to improve student written communication and critical thinking skills. Faculty members and employers of graduates assert that incorporating writing intensive requirements have better prepared students for their professional role to effectively communicate and think critically.

Role of the misfit stress between grains in the Bauschinger effect for a polycrystalline material

International Nuclear Information System (INIS)

Chen, B.; Hu, J.N.; Wang, Y.Q.; Zhang, S.Y.; Van Petegem, S.; Cocks, A.C.F.; Smith, D.J.; Flewitt, P.E.J.

2015-01-01

The role of misfit stress in kinematic hardening under reversed straining of a Type 316H austenitic stainless steel has been investigated by using neutron diffraction combined with in situ deformation. Initial misfit stresses, often referred to an intergranular internal stresses, were created by the tensile pre-straining at high temperature. The misfit stresses at the length-scale of grain families, measured by neutron diffraction, were shown to be a function of the magnitude of the tensile pre-strain. The pre-strained specimens were further subjected to either continued (tensile) straining or reversed (compressive) straining at room temperature. In situ neutron diffraction measurements were undertaken to monitor the change of the misfit stresses during loading. The macroscopic stress–strain behaviour was used to derive isotropic and kinematic hardening stresses developed in the pre-strained specimens. Results show that the change of the transient softening stress towards a zero value is accompanied by a decrease in the change of the misfit stresses. A multi-scale self-consistent model has been developed to assist in understanding the measured change of the misfit stresses when subjecting the material to strain reversal. An important conclusion is that the origin of the kinematic hardening of Type 316H austenitic stainless steel arises from the misfit stress between grains

Damage to the DNA of microorganisms from decay of incorporated 125I and the relationship of DNA damage to lethal effects

International Nuclear Information System (INIS)

Krisch, R.E.; Krasin, F.; Sauri, C.J.

1975-01-01

Iodine-125 decays by electron capture and is known to cause severe molecular damage to small organic molecules via vacancy cascades. In an examination of the biological effects of this decay mode we have labelled coliphages T1 and T4, as well as E. coli, with 125 I-5-iododeoxyuridine, which is incorporated into DNA in place of thymidine. Labelled organisms are generally stored in liquid nitrogen at -196 0 C during decay and are periodically assayed for loss of viability and for breakage of DNA, using neutral and alkaline sucrose gradient sedimentation techniques. Briefly, our experiments have demonstrated drastic damage to DNA from the decay of incorporated 125 I, as would be predicted from the data for small molecules. (auth)

Kinematic Hardening: Characterization, Modeling and Impact on Springback Prediction

International Nuclear Information System (INIS)

Alves, J. L.; Bouvier, S.; Jomaa, M.; Billardon, R.; Oliveira, M. C.; Menezes, L. F.

2007-01-01

The constitutive modeling of the materials' mechanical behavior, usually carried out using a phenomenological constitutive model, i.e., a yield criterion associated to the isotropic and kinematic hardening laws, is of paramount importance in the FEM simulation of the sheet metal forming processes, as well as in the springback prediction. Among others, the kinematic behavior of the yield surface plays an essential role, since it is indispensable to describe the Bauschinger effect, i.e., the materials' answer to the multiple tension-compression cycles to which material points are submitted during the forming process. Several laws are usually used to model and describe the kinematic hardening, namely: a) the Prager's law, which describes a linear evolution of the kinematic hardening with the plastic strain rate tensor b) the Frederick-Armstrong non-linear kinematic hardening, basically a non-linear law with saturation; and c) a more advanced physically-based law, similar to the previous one but sensitive to the strain path changes. In the present paper a mixed kinematic hardening law (linear + non-linear behavior) is proposed and its implementation into a static fully-implicit FE code is described. The material parameters identification for sheet metals using different strategies, and the classical Bauschinger loading tests (i.e. in-plane forward and reverse monotonic loading), are addressed, and their impact on springback prediction evaluated. Some numerical results concerning the springback prediction of the Numisheet'05 Benchmark no. 3 are briefly presented to emphasize the importance of a correct modeling and identification of the kinematic hardening behavior

Method Development for Efficient Incorporation of Unnatural Amino Acids

KAUST Repository

Harris, Paul D.

2014-04-01

The synthesis of proteins bearing unnatural amino acids has the potential to enhance and elucidate many processes in biochemistry and molecular biology. There are two primary methods for site specific unnatural amino acid incorporation, both of which use the cell’s native protein translating machinery: in vitro chemical acylation of suppressor tRNAs and the use of orthogonal amino acyl tRNA synthetases. Total chemical synthesis is theoretically possible, but current methods severely limit the maximum size of the product protein. In vivo orthogonal synthetase methods suffer from the high cost of the unnatural amino acid. In this thesis I sought to address this limitation by increasing cell density, first in shake flasks and then in a bioreactor in order to increase the yield of protein per amount of unnatural amino acid used. In a parallel project, I used the in vitro chemical acylation system to incorporate several unnatural amino acids, key among them the fluorophore BODIPYFL, with the aim of producing site specifically fluorescently labeled protein for single molecule FRET studies. I demonstrated successful incorporation of these amino acids into the trial protein GFP, although incorporation was not demonstrated in the final target, FEN1. This also served to confirm the effectiveness of a new procedure developed for chemical acylation.

Method Development for Efficient Incorporation of Unnatural Amino Acids

KAUST Repository

Harris, Paul D.

2014-01-01

The synthesis of proteins bearing unnatural amino acids has the potential to enhance and elucidate many processes in biochemistry and molecular biology. There are two primary methods for site specific unnatural amino acid incorporation, both of which use the cell’s native protein translating machinery: in vitro chemical acylation of suppressor tRNAs and the use of orthogonal amino acyl tRNA synthetases. Total chemical synthesis is theoretically possible, but current methods severely limit the maximum size of the product protein. In vivo orthogonal synthetase methods suffer from the high cost of the unnatural amino acid. In this thesis I sought to address this limitation by increasing cell density, first in shake flasks and then in a bioreactor in order to increase the yield of protein per amount of unnatural amino acid used. In a parallel project, I used the in vitro chemical acylation system to incorporate several unnatural amino acids, key among them the fluorophore BODIPYFL, with the aim of producing site specifically fluorescently labeled protein for single molecule FRET studies. I demonstrated successful incorporation of these amino acids into the trial protein GFP, although incorporation was not demonstrated in the final target, FEN1. This also served to confirm the effectiveness of a new procedure developed for chemical acylation.

A Framework Incorporating Community Preferences in Use ...

Science.gov (United States)

The report is intended to assist water quality officials, watershed managers, members of stakeholder groups, and other interested individuals in fully evaluating ecological and socioeconomic objectives and the gains and losses that often are involved in use attainment decisions. In addition, this report enables local, state, and tribal managers to better understand the benefits, as well as the costs, of attaining high water quality, and to incorporate community preferences in decision-making. Specific objectives are (1) to provide an introduction to the CWA and WQS regulation and analyses related to setting or changing designated uses; (2) create a basis for understanding the relationship between use-attainment decisions and the effects on ecosystems, ecosystem services, and ecological benefits; (3) serve as reference for methods that elicit or infer preferences for benefits and costs related to attaining uses and (4) present process for incorporating new approaches in water quality decisions.

Mutagenic effect of radionuclides incorporated into DNA of drosphila melanogaster. Progress report, 1976--1977

International Nuclear Information System (INIS)

Lee, W.R.

1977-01-01

Progress is reported on studies of the genetic effect of tritium incorporated into DNA of Drosophila melanogaster. Following a short pulse exposure to tritium-labeled uridine most of the radioactivity appeared in RNA; however, the turnover of radioactivity in tritium-labeled RNA was rapid whereas there was no exchange of tritium from the labeled DNA during spermatogenesis. Furthermore, most of the cytoplasm and most of the RNA in primary spermatocytes was lost during spermatogenesis and thus the mature sperm cell was left with only the DNA labeled. Preliminary experiments did not show a significant level of labeled RNA remaining in the mature sperm cell, whereas labeled DNA was verified after extraction and purification with phenol and enzyme digestion. Preliminary results of genetic tests on the progeny of normal females inseminated with tritium-labeled sperm cells are reported

Host thin films incorporating nanoparticles

Science.gov (United States)

Qureshi, Uzma

The focus of this research project was the investigation of the functional properties of thin films that incorporate a secondary nanoparticulate phase. In particular to assess if the secondary nanoparticulate material enhanced a functional property of the coating on glass. In order to achieve this, new thin film deposition methods were developed, namely use of nanopowder precursors, an aerosol assisted transport technique and an aerosol into atmospheric pressure chemical vapour deposition system. Aerosol assisted chemical vapour deposition (AACVD) was used to deposit 8 series of thin films on glass. Five different nanoparticles silver, gold, ceria, tungsten oxide and zinc oxide were tested and shown to successfully deposit thin films incorporating nanoparticles within a host matrix. Silver nanoparticles were synthesised and doped within a titania film by AACVD. This improved solar control properties. A unique aerosol assisted chemical vapour deposition (AACVD) into atmospheric pressure chemical vapour deposition (APCVD) system was used to deposit films of Au nanoparticles and thin films of gold nanoparticles incorporated within a host titania matrix. Incorporation of high refractive index contrast metal oxide particles within a host film altered the film colour. The key goal was to test the potential of nanopowder forms and transfer the suspended nanopowder via an aerosol to a substrate in order to deposit a thin film. Discrete tungsten oxide nanoparticles or ceria nanoparticles within a titanium dioxide thin film enhanced the self-cleaning and photo-induced super-hydrophilicity. The nanopowder precursor study was extended by deposition of zinc oxide thin films incorporating Au nanoparticles and also ZnO films deposited from a ZnO nanopowder precursor. Incorporation of Au nanoparticles within a VO: host matrix improved the thermochromic response, optical and colour properties. Composite VC/TiC and Au nanoparticle/V02/Ti02 thin films displayed three useful

Calculation of the activity incorporated in the therapy with I 131

International Nuclear Information System (INIS)

Chica, L.G.; Puerta, J.A.

1998-01-01

By means of the product S(T--S). A-s-(T-e-). the absorbed dose to thyroid delivered by I-131 incorporated is calculated. Where S(T--S) is the absorbed dose in the thyroid per nuclear transformations (tn.) of I-131 localized in the thyroid and as a potential function of the mass is expressed. A-s-(T-e-) is the number of tn. of I-131 in the thyroid since the moment of the incorporation until the time T-e- (the effective middle time); to find A-s-(T-e-) to normal as different pathological conditions, the metabolic model of the iodo proposed by the ICRP is used. Of the expression of the doses, the incorporated activity, I-o- is obtained

Incorporation of radioactive amino acids into protein in isolated rat hepatocytes

International Nuclear Information System (INIS)

Seglin, P.O.

1976-01-01

The incorporation of radioactivity from a 14 C-labelled amino acid mixture (algal protein hydrolysate) into protein in isolated rat hepatocytes has been studied. The incorporation rate declined with increasing cell concentration, an effect which could be explained by isotope consumption, partly (and largely) by isotope dilution due to the formation of non-labelled amino acids by the cells. At a high extracellular amino acid concentration, the rate of incorporation into protein became independent of cell concentration because the isotope dilution effect was now quantitatively insignificant. The time course of protein labelling at various cell concentrations correlated better with the intracellular than with the extracellular amino acid specific activity, suggesting that amino acids for protein synthesis were taken from an intracellular pool. With increasing extracellular amino acid concentrations, both the intracellular amino acid concentration, the intracellular radioactivity and the rate of incorporation into protein increased. Protein labelling exhibited a distinct time lag at high amino acid concentrations, presumable reflecting the time-dependent expansion of the intracellular amino acid pool. The gradual increase in the rate of protein labelling could be due either to an increased intracellular specific activity, or to a real stimulation of protein synthesis by amino acids, depending on whether the total intracellular amino acid pool or just the expandable compartment is the precursor pool for protein synthesis

Effect of insulin on albumin production and incorporation of 14C-leucine into proteins in isolated parenchymal liver cells from normal rats

DEFF Research Database (Denmark)

Dich, J; Gluud, C N

1975-01-01

the immunologically determined increment in the incubation medium was 1.7 +/- 0.2 mug albumin/min per g liver wet wt. This is about 30% of the rate of production in the perfused liver. Addition of insulin (10(-6)-10(-10) M) enhanced albumin production (50-17%), and incorporation of 14C-leucine both into albumin (50......Parenchymal rat liver cells were isolated by a modification of the collagenase method of Quistorff, Bondesen and Grunnet. The cells secreted albumin into the medium and incorporated 14C-leucine both into cell proteins and proteins secreted into the medium. Albumin production measured from......-8%), secreted proteins (40-9%) and cell proteins (20-8%). Insulin does not increase the production of albumin by depleting the cells. The effect of insulin on albumin production is compatible with an effect on the rate of synthesis as the specific activity of albumin is unaffected by addition of insulin....

17 CFR 230.411 - Incorporation by reference.

Science.gov (United States)

2010-04-01

... following provisions: (1) Non-financial information may be incorporated by reference to any document; (2) Financial information may be incorporated by reference to any document, provided any financial statement so incorporated meets the requirements of the forms on which the statement is filed. Financial statements or other...

Syntheses and characterization of liposome-incorporated adamantyl aminoguanidines.

Science.gov (United States)

Šekutor, Marina; Štimac, Adela; Mlinarić-Majerski, Kata; Frkanec, Ruža

2014-08-21

A series of mono and bis-aminoguanidinium adamantane derivatives has been synthesized and incorporated into liposomes. They combine two biomedically significant molecules, the adamantane moiety and the guanidinium group. The adamantane moiety possesses the membrane compatible features while the cationic guanidinium subunit was recognized as a favourable structural feature for binding to complementary molecules comprising phosphate groups. The liposome formulations of adamantyl aminoguanidines were characterized and it was shown that the entrapment efficiency of the examined compounds is significant. In addition, it was demonstrated that liposomes with incorporated adamantyl aminoguanidines effectively recognized the complementary liposomes via the phosphate group. These results indicate that adamantane derivatives bearing guanidinium groups might be versatile tools for biomedical application, from studies of molecular recognition processes to usage in drug formulation and cell targeting.

Large sensitivity enhancement in semiconducting organic field effect transistor sensors through incorporation of ultra-fine platinum nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Zheng, Haisheng; Ramalingam, Balavinayagam; Korampally, Venumadhav; Gangopadhyay, Shubhra, E-mail: gangopadhyays@missouri.edu [Department of Electrical and Computer Engineering, University of Missouri, Columbia, Missouri 65201 (United States)

2013-11-04

We report remarkable improvement in sensitivity of pentacene-based field effect transistor devices towards trace nitro-aromatic explosive vapors through the incorporation of high density, sub-2 nm platinum nanoparticles (NPs) within these structures. Exploiting the unique electronic properties of these NPs, we have demonstrated a detection limit of 56.6 parts per billion of 2,4-dinitrotoluene (DNT) vapor while control samples without any embedded NPs showed no observable sensitivity to DNT vapor. We attribute this remarkable enhancement in sensitivity to the ability of these NPs to function as discrete nodes, participating in the charge transfer with adsorbed nitro-aromatic molecules.

Incorporation of carbohydrate residues into peroxidase isoenzymes in horseradish roots.

Science.gov (United States)

Lew, J Y; Shannon, L M

1973-11-01

Sliced root tissue of the horseradish plant (Armoracia rusticana), when incubated with mannose-U-(14)C, incorporated radioactivity into peroxidase isoenzymes. Over 90% of the radioactivity in the highly purified peroxidase isoenzymes was present in the neutral sugar residues of the molecule, i.e. fucose, arabinose, xylose, mannose. When the root slices were incubated simultaneously with leucine-4,5-(3)H and mannose-U-(14)C, cycloheximide strongly inhibited leucine incorporation into the peptide portion of peroxidase isoenzymes but had little effect on the incorporation of (14)C into the neutral sugars. These results indicated that synthesis of the peptide portion of peroxidase was completed before the monosaccharide residues were attached to the molecule. This temporal relationship between the synthesis of protein and the attachment of carbohydrate residues in the plant glycoprotein, horseradish peroxidase, appears to be similar to that reported for glycoprotein biosynthesis in many mammalian systems.

Biochemical properties of Hemigraphis alternata incorporated chitosan hydrogel scaffold.

Science.gov (United States)

Annapoorna, M; Sudheesh Kumar, P T; Lakshman, Lakshmi R; Lakshmanan, Vinoth-Kumar; Nair, Shantikumar V; Jayakumar, R

2013-02-15

In this work, Hemigraphis alternata extract incorporated chitosan scaffold was synthesized and characterized for wound healing. The antibacterial activity of Hemigraphis incorporated chitosan scaffold (HIC) against Escherichia coli and Staphylococcus aureus was evaluated which showed a reduction in total colony forming units by 45-folds toward E. coli and 25-fold against S. aureus respectively. Cell viability studies using Human Dermal Fibroblast cells (HDF) showed 90% viability even at 48 h when compared to the chitosan control. The herbal scaffold made from chitosan was highly haemostatic and antibacterial. The obtained results were in support that the herbal scaffold can be effectively applied for infectious wounds. Copyright © 2012 Elsevier Ltd. All rights reserved.

Microscopic fracture of filaments and its relation to the critical current under bending deformation in (Bi,Pb)2Sr2Ca2Cu3O10 composite superconducting tapes

International Nuclear Information System (INIS)

Hojo, Masaki; Nakamura, Mitsuhiro; Matsuoka, Tomoe; Tanaka, Mototsugu; Ochiai, Shojiro; Sugano, Michinaka; Osamura, Kozo

2003-01-01

The strain dependence of the critical current, I c , of (Bi,Pb) 2 Sr 2 Ca 2 Cu 3 O 10 (Bi2223)/Ag/Ag-Mg composite superconducting tapes has been studied both experimentally and analytically under bending deformation. Tests have been carried out for one type of tape used in the VAMAS bending round-robin programme. The complex stress-strain behaviour of each component was first analysed in tension. This was done by comparing the stress-strain curves of composite tapes with those of Ag and Ag-Mg alloy tapes. Here, the plastic deformation (work hardening) of Ag and Ag-Mg alloy, and the thermal residual strain due to the manufacturing process were taken into account. The fracture strain of Bi2223 filaments was inversely determined as 0.08% to meet the global tensile stress-strain curve of the composite tape. The calculated stress-strain curves finally agreed well with the experimental results when the as-supplied bending strain was taken into account. Then, the analysis was modified to fit the bending deformation. Here, the movement of the neutral axis due to the non-symmetric and elastic-plastic stress-strain curves of the components and their Bauschinger effect were taken into account. The relative decrease of I c with the increase in the Bi2223 tape curvature was calculated from the volume fraction of the broken filaments. The calculated I c agreed well with the experimental results when the movement of the neutral axis and the Bauschinger effect were taken into account. Microscopic observation of the spatial distribution of the filament fracture indicated that the damage occurred at the outermost layer on the tensile side when the curvature was small, and then the damage front shifted to the inside layers. The observed fracture behaviour of the Bi2223 filament agreed well with the estimated location based on the above analysis

Carnauba straw incorporated into the soil for fertilization carrot in organic cultivation

Directory of Open Access Journals (Sweden)

Micharlyson Carlos Morais

2017-10-01

Full Text Available Carrot is one of the most produced vegetables in Brazil and, with the growing demand for organic vegetables, it is necessary to develop production technologies that are less dependent on external inputs and more accessible to family agriculture. The objective of this study was to evaluate the effect of the addition to soil of carnauba straw as fertilizer, incorporated under different pre-planting periods, for the organic cultivation of the carrot. The experiment was carried out in the Experimental Horta of the Instituto Federal do Rio Grande do Norte, Campus Ipanguaçu, using the experimental design in randomized blocks with three replicates and five treatments referring to the times of 15; 30; 45 and 60 days for the incorporation of carnauba straw, in the amount of 14 t ha-1, prior to planting the carrot, and a control treatment without addition of straw to the soil. The evaluated characteristics was dry mass of the aerial part, the length and root diameter, and productivity. There was an effect of the incorporation time of the carnauba straw on the length and productivity, being the highest values observed when the straw was incorporated between 15 and 30 days before sowing.

Theoretical study of physical properties and oxygen incorporation effect in nanolaminated ternary carbides 211-MAX phases

KAUST Repository

Kanoun, Mohammed

2012-01-01

In this chapter, we employ ab initio approaches to review some important physical properties of nanolaminated ternary carbides MAX phases. We fi rstly use an all electron full-potential linearized augmented plane-wave method within the generalized gradient approximation and the density functional theory approaches, to explore the existence of a steric effect on the M site in these compounds. The elastic properties are also reported in order to assess the mechanical stability. The substitution of oxygen for carbon in Ti 2 SnC M n +1 AX n, forming Ti 2 SnC 1- x O x, is examined next, where we simulated the effect of oxygen incorporation on mechanical and electronic properties using projector augmented wave method. We show that oxygen has interesting effects on both of elastic and electronic properties, that the bulk modulus decreases when oxygen concentration increases. The bonding in Ti 2 SnC 1- x O x has a tendency to a covalent-ionic nature with the presence of metallic character. © 2012 Woodhead Publishing Limited.

Direct incorporation of guanosine 5'-diphosphate into microtubules without guanosine 5'-triphosphate hydrolysis

International Nuclear Information System (INIS)

Hamel, E.; Batra, J.K.; Lin, C.M.

1986-01-01

Using highly purified calf brain tubulin bearing [8- 14 C]guanosine 5'-diphosphate (GDP) in the exchangeable nucleotide site and heat-treated microtubule-associated proteins, the authors have found that a significant proportion of exchangeable-site GDP in microtubules can be incorporated directly during guanosine 5'-triphosphate (GTP) dependent polymerization of tubulin, without an initial exchange of GDP for GTP and subsequent GTP hydrolysis during assembly. The precise amount of GDP incorporated directly into microtubules is highly dependent on specific reaction conditions, being favored by high tubulin concentrations, low GTP and Mg 2+ concentrations, and exogenous GDP in the reaction mixture. Minimum effects were observed with changes in reaction pH or temperature, changes in concentration of microtubule-associated proteins, alteration of the sulfonate buffer, or the presence of a calcium chelator in the reaction mixture. Under conditions most favorable for direct GDP incorporation, about one-third of the GDP in microtubules is incorporated directly (without GTP hydrolysis) and two-thirds is incorporated hydrolytically (as a consequence of GTP hydrolysis). Direct incorporation of GDP occurs in a constant proportion throughout elongation, and the amount of direct incorporation probably reflects the rapid equilibration of GDP and GTP at the exchangeable site that occurs before the onset of assembly

Incorporating Financial Stability in Inflation Targeting Frameworks

OpenAIRE

Burcu Aydin; Engin Volkan

2011-01-01

The global financial crisis has exposed the limitations of a conventional inflation targeting (IT) framework in insulating an economy from shocks, and demonstrated that its rigid application may aggravate the effect of shocks on output and inflation. Accordingly, we investigate possible refinements to the IT framework by incorporating financial stability considerations. We propose a small open economy DSGE model, calibrated for Korea during the period of 2003 - 07, with real and financial fri...

Radiological accidents: methodologies of radio nuclides dis incorporation; Accidentes radiologicos: metodologias de desincorporacion de radionuclidos

Energy Technology Data Exchange (ETDEWEB)

Jimenez F, E. A. [Universidad Autonoma del Estado de Mexico, Facultad de Medicina, Paseo Tollocan s/n, 50180 Toluca, Estado de Mexico (Mexico); Paredes G, L. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Cortes, A., E-mail: lydia.paredes@inin.gob.mx [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Jose Ma. Barragan No. 779, Col. Narvarte, 03020 Mexico D. F. (Mexico)

2014-08-15

Derived of the radioactive or nuclear material management, exists the risk that accidents can happen where people cases are presented with internal radioactive contamination, who will receive specialized medical care to accelerate the radioactive dis incorporation with the purpose of diminishing the absorbed dose and the associate biological effects. In this work treatments of radioactive dis incorporation were identified, in function of the radionuclide, radiation type, radioactive half life, biological half life, critical organ, ingestion duct and patient type. The factor time is decisive for the effectiveness of the selected treatment in the blockade stage (before the accident) or dis incorporation (after the accident); this factor is related with the radioactive and biological half lives. So to achieve dis incorporation efficiencies of more to 70%, the patient clinical treatment will begin before the first third of the biological half life of the radionuclide that generated the internal contamination. (Author)

Influence of microstructure and mean stress on the fatique behaviour of Ti-6Al-4V

International Nuclear Information System (INIS)

Steele, R.K.; McEvily, A.J.

1977-01-01

In previous fatigue studies of Ti-6Al-4V bar stock and forgings a number of findings of interest were encountered. These findings include the sub-surface initiation of fatigue cracks, a strong Bauschinger effect, cyclic softening, an influence of microstructural size on resistance to fatigue (particularly at R=0), and a dependency of cyclic-stress strain behavior on loading path. The present paper extends the work of the earlier investigations to cover a wider range of microstructures as well as cyclic loading conditions. The basic materials are forging and bar stock of the Ti-6Al-4V alloy with microstructural variations being achieved by different heat treating procedures. (Auth.)

Effect of Hyaluronic Acid Incorporation Method on the Stability and Biological Properties of Polyurethane-Hyaluronic Acid Biomaterials

Science.gov (United States)

Ruiz, Amaliris; Rathnam, Kashmila R.; Masters, Kristyn S.

2014-01-01

The high failure rate of small diameter vascular grafts continues to drive the development of new materials and modification strategies that address this clinical problem, with biomolecule incorporation typically achieved via surface-based modification of various biomaterials. In this work, we examined whether the method of biomolecule incorporation (i.e., bulk vs. surface modification) into a polyurethane (PU) polymer impacted biomaterial performance in the context of vascular applications. Specifically, hyaluronic acid (HA) was incorporated into a poly(ether urethane) via bulk copolymerization or covalent surface tethering, and the resulting PU-HA materials characterized with respect to both physical and biological properties. Modification of PU with HA by either surface or bulk methods yielded materials that, when tested under static conditions, possessed no significant differences in their ability to resist protein adsorption, platelet adhesion, and bacterial adhesion, while supporting endothelial cell culture. However, only bulk-modified PU-HA materials were able to fully retain these characteristics following material exposure to flow, demonstrating a superior ability to retain the incorporated HA and minimize enzymatic degradation, protein adsorption, platelet adhesion, and bacterial adhesion. Thus, despite bulk methods rarely being implemented in the context of biomolecule attachment, these results demonstrate improved performance of PU-HA upon bulk, rather than surface, incorporation of HA. Although explored only in the context of PU-HA, the findings revealed by these experiments have broader implications for the design and evaluation of vascular graft modification strategies. PMID:24276670

A randomized study of the effect of fish oil on n-3 fatty acid incorporation and nutritional status in lung cancer patients

DEFF Research Database (Denmark)

Andersen, Jens Rikardt; Dannerfjord, Stina Hjerrild; Nørgaard, Michael

2015-01-01

Long-chain n-3 polyunsaturated fatty acids (n-3 LCPUFA) have been proposed to have beneficial effect on cancer cachexia. The aims of the present study were to a) determine the incorporation of n-3 LCPUFA in erythrocytes (RBC) as a measurement of compliance to fish oil (FO)-supplement in lung cancer...

Effect of polyunsaturated fatty acids and phospholipids on [3H]-vitamin E incorporation into pulmonary artery endothelial cell membranes

International Nuclear Information System (INIS)

Sekharam, K.M.; Patel, J.M.; Block, E.R.

1990-01-01

Vitamin E, a dietary antioxidant, is presumed to be incorporated into the lipid bilayer of biological membranes to an extent proportional to the amount of polyunsaturated fatty acids or phospholipids in the membrane. In the present study we evaluated the distribution of incorporated polyunsaturated fatty acids (PUFA) and phosphatidylethanolamine (PE) in various membranes of pulmonary artery endothelial cells. We also studied whether incorporation of PUFA or PE is responsible for increased incorporation of [3H]-vitamin E into the membranes of these cells. Following a 24-hr incubation with linoleic acid (18:2), 18:2 was increased by 6.9-, 9.2-, and 13.2-fold in plasma, mitochondrial, and microsomal membranes, respectively. Incorporation of 18:2 caused significant increases in the unsaturation indexes of mitochondrial and microsomal polyunsaturated fatty acyl chains (P less than .01 versus control in both membranes). Incubation with arachidonic acid (20:4) for 24 hr resulted in 1.5-, 2.3-, and 2.4-fold increases in 20:4 in plasma, mitochondrial, and microsomal membranes, respectively. The unsaturation indexes of polyunsaturated fatty acyl chains of mitochondrial and microsomal membranes also increased (P less than .01 versus control in both membranes). Although incubations with 18:2 or 20:4 resulted in several-fold increases in membrane 18:2 or 20:4 fatty acids, incorporation of [3H]-vitamin E into these membranes was similar to that in controls. Following a 24-hr incubation with PE, membrane PE content was significantly increased, and [3H]-vitamin E incorporation was also increased to a comparable degree, i.e., plasma membrane greater than mitochondria greater than microsomes. Endogenous vitamin E content of the cells was not altered because of increased incorporation of PE and [3H]-vitamin E

Test particle method for incorporation of the kinetic effects into the envelope simulations of Raman backscattering

International Nuclear Information System (INIS)

Hur, Min Sup; Suk, Hyyong

2007-01-01

A new test particle method is presented for self-consistent incorporation of the kinetic effects into the fluid three-wave model. One of the most important kinetic effects is the electron trapping and it has been found that the trapping affects significantly the behavior of Raman backscatter and Raman backward laser amplification. The conventional fluid three-wave model cannot reproduce the kinetic simulations in the trapping regime. The test particle scheme utilizes the same equations for the laser evolution as in the three-wave model. However, the plasma wave is treated by the envelope-kinetic equation, which consists of envelope evolution and the kinetic term. The core of the new scheme is employing test particles to compute the kinetic term self-consistently. The benchmarking results against the averaged particle-in-cell (aPIC) code show excellent agreements, and the computation speed gain over the aPIC is from 2 to 20 depending on parameters

Incorporation of plant materials in the control of root pathogens in muskmelon

Directory of Open Access Journals (Sweden)

Andréa Mirne de Macêdo Dantas

2013-12-01

Full Text Available The effect of plant materials[Sunn Hemp (Crotalaria juncea, Castor Bean (Ricinus communis L., Cassava (Manihot esculenta Crantz and Neem (Azadirachta indica] and the times of incorporation of these materials in regards to the incidence of root rot in melon was evaluated in Ceará state, Brazil. The experiment was conducted in a commercial area with a history of root pathogens in cucurbitaceae. The randomized block design was used, in a 5 x 3 factorial arrangement with four repetitions. The treatments consisted of a combination of four plant materials (sunn hemp, castor beans, cassava and neem and a control with no soil incorporation of plant material and three times of incorporation (28, 21, and 14 days before the transplanting of the seedlings. Lower incidence of root rot was observed in practically all of the treatments where materials were incorporated at different times, with variation between the materials, corresponding with the time of incorporation, in relation to the soil without plant material. The pathogens isolated from the symptomatic muskmelon plants were Fusarium solani, Macrophomina phaseolina, Monosporascus cannonballus and Rhizoctonia solani, F. solani being encountered most frequently.

An improved analytical model of 4H-SiC MESFET incorporating bulk and interface trapping effects

Science.gov (United States)

Hema Lata Rao, M.; Narasimha Murty, N. V. L.

2015-01-01

An improved analytical model for the current—voltage (I-V) characteristics of the 4H-SiC metal semiconductor field effect transistor (MESFET) on a high purity semi-insulating (HPSI) substrate with trapping and thermal effects is presented. The 4H-SiC MESFET structure includes a stack of HPSI substrates and a uniformly doped channel layer. The trapping effects include both the effect of multiple deep-level traps in the substrate and surface traps between the gate to source/drain. The self-heating effects are also incorporated to obtain the accurate and realistic nature of the analytical model. The importance of the proposed model is emphasised through the inclusion of the recent and exact nature of the traps in the 4H-SiC HPSI substrate responsible for substrate compensation. The analytical model is used to exhibit DC I-V characteristics of the device with and without trapping and thermal effects. From the results, the current degradation is observed due to the surface and substrate trapping effects and the negative conductance introduced by the self-heating effect at a high drain voltage. The calculated results are compared with reported experimental and two-dimensional simulations (Silvaco®-TCAD). The proposed model also illustrates the effectiveness of the gate—source distance scaling effect compared to the gate—drain scaling effect in optimizing 4H-SiC MESFET performance. Results demonstrate that the proposed I-V model of 4H-SiC MESFET is suitable for realizing SiC based monolithic circuits (MMICs) on HPSI substrates.

An improved analytical model of 4H-SiC MESFET incorporating bulk and interface trapping effects

International Nuclear Information System (INIS)

Rao, M. Hema Lata; Murty, N. V. L. Narasimha

2015-01-01

An improved analytical model for the current—voltage (I–V) characteristics of the 4H-SiC metal semiconductor field effect transistor (MESFET) on a high purity semi-insulating (HPSI) substrate with trapping and thermal effects is presented. The 4H-SiC MESFET structure includes a stack of HPSI substrates and a uniformly doped channel layer. The trapping effects include both the effect of multiple deep-level traps in the substrate and surface traps between the gate to source/drain. The self-heating effects are also incorporated to obtain the accurate and realistic nature of the analytical model. The importance of the proposed model is emphasised through the inclusion of the recent and exact nature of the traps in the 4H-SiC HPSI substrate responsible for substrate compensation. The analytical model is used to exhibit DC I–V characteristics of the device with and without trapping and thermal effects. From the results, the current degradation is observed due to the surface and substrate trapping effects and the negative conductance introduced by the self-heating effect at a high drain voltage. The calculated results are compared with reported experimental and two-dimensional simulations (Silvaco®-TCAD). The proposed model also illustrates the effectiveness of the gate—source distance scaling effect compared to the gate—drain scaling effect in optimizing 4H-SiC MESFET performance. Results demonstrate that the proposed I–V model of 4H-SiC MESFET is suitable for realizing SiC based monolithic circuits (MMICs) on HPSI substrates. (semiconductor devices)

"Violent Intent Modeling: Incorporating Cultural Knowledge into the Analytical Process

Energy Technology Data Exchange (ETDEWEB)

Sanfilippo, Antonio P.; Nibbs, Faith G.

2007-08-24

While culture has a significant effect on the appropriate interpretation of textual data, the incorporation of cultural considerations into data transformations has not been systematic. Recognizing that the successful prevention of terrorist activities could hinge on the knowledge of the subcultures, Anthropologist and DHS intern Faith Nibbs has been addressing the need to incorporate cultural knowledge into the analytical process. In this Brown Bag she will present how cultural ideology is being used to understand how the rhetoric of group leaders influences the likelihood of their constituents to engage in violent or radicalized behavior, and how violent intent modeling can benefit from understanding that process.

Incorporating Yoga Therapy into Primary Care: The Casey Health Institute.

Science.gov (United States)

Ross, Alyson; Williams, Laurie; Pappas-Sandonas, Mary; Touchton-Leonard, Katharine; Fogel, David

2015-01-01

Individuals seek complementary and alternative medicine (CAM) for a variety of health conditions, and yoga is a popular CAM modality. Over the past few decades, yoga has become incorporated into hundreds of healthcare facilities, most commonly in large university medical centers. While research has shown yoga to be effective in reducing symptoms and improving outcomes in chronic health conditions, most patients seek yoga therapy on their own, as few primary care practitioners have incorporated yoga therapy into their practices. The purpose of this article is to describe the efforts of the Casey Health Institute to incorporate yoga therapy into their primary care integrative medicine center. At Casey Health, a full-time Clinical Yoga Specialist works alongside the physicians, nurses, and CAM providers in delivering care to a wide variety of patients. The majority of referrals to yoga therapy have been for pain-related musculoskeletal conditions, as well as hypertension, headaches, anxiety, depression, and sleep disturbances. Most patients attend weekly 60-minute individual sessions, and the Clinical Yoga Specialist stays in touch with the patient between appointments via telephone and email. T h e Clinical Yoga Specialist has become an integral part of Casey Health, participating in collaborative medical appointments in which two CAM practitioners provide simultaneous treatments to a patient. She also participates in the clinic's ongoing weight loss program. The Clinical Yoga Specialist spends one morning each week "floating" in the clinic, when she is on-call to the practitioners to assist in treatment and/or to introduce a yoga therapy experience to the patients. These brief interventions introduce the patients to the therapeutic benefits of yoga, while simultaneously demonstrating yoga's effectiveness to the healthcare providers. Casey Health has developed a unique teacher training program whose faculty includes senior Iyengar yoga teachers as well as physicians

Temporal succession in carbon incorporation from macromolecules by particle-attached bacteria in marine microcosms: Particle-attached bacteria incorporating organic carbon

Energy Technology Data Exchange (ETDEWEB)

Mayali, Xavier [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Stewart, Benjamin [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mabery, Shalini [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Weber, Peter K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-12-21

Here, we investigated bacterial carbon assimilation from stable isotope-labelled macromolecular substrates (proteins; lipids; and two types of polysaccharides, starch and cellobiose) while attached to killed diatom detrital particles during laboratory microcosms incubated for 17 days. Using Chip-SIP (secondary ion mass spectrometry analysis of RNA microarrays), we identified generalist operational taxonomic units (OTUs) from the Gammaproteobacteria, belonging to the genera Colwellia, Glaciecola, Pseudoalteromonas and Rheinheimera, and from the Bacteroidetes, genera Owenweeksia and Maribacter, that incorporated the four tested substrates throughout the incubation period. Many of these OTUs exhibited the highest isotope incorporation relative to the others, indicating that they were likely the most active. Additional OTUs from the Gammaproteobacteria, Bacteroidetes and Alphaproteobacteria exhibited generally (but not always) lower activity and did not incorporate all tested substrates at all times, showing species succession in organic carbon incorporation. We also found evidence to suggest that both generalist and specialist OTUs changed their relative substrate incorporation over time, presumably in response to changing substrate availability as the particles aged. This pattern was demonstrated by temporal succession from relatively higher starch incorporation early in the incubations, eventually switching to higher cellobiose incorporation after 2 weeks.

Effects of straw incorporation along with microbial inoculant on methane and nitrous oxide emissions from rice fields

Energy Technology Data Exchange (ETDEWEB)

Liu, Gang; Yu, Haiyang [State Key Laboratory of Soil and Sustainable Agriculture, Institute of Soil Science, Chinese Academy of Sciences, No. 71 East Beijing Road, Nanjing 210008 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Ma, Jing [State Key Laboratory of Soil and Sustainable Agriculture, Institute of Soil Science, Chinese Academy of Sciences, No. 71 East Beijing Road, Nanjing 210008 (China); Xu, Hua, E-mail: hxu@issas.ac.cn [State Key Laboratory of Soil and Sustainable Agriculture, Institute of Soil Science, Chinese Academy of Sciences, No. 71 East Beijing Road, Nanjing 210008 (China); Wu, Qinyan; Yang, Jinghui; Zhuang, Yiqing [Zhenjiang Institute of Agricultural Science of Hilly Regions in Jiangsu, Jurong 212400 (China)

2015-06-15

Incorporation of straw together with microbial inoculant (a microorganism agent, accelerating straw decomposition) is being increasingly adopted in rice cultivation, thus its effect on greenhouse gas (GHG) emissions merits serious attention. A 3-year field experiment was conducted from 2010 to 2012 to investigate combined effect of straw and microbial inoculant on methane (CH{sub 4}) and nitrous oxide (N{sub 2}O) emissions, global warming potential (GWP) and greenhouse gas intensity (GHGI) in a rice field in Jurong, Jiangsu Province, China. The experiment was designed to have treatment NPK (N, P and K fertilizers only), treatment NPKS (NPK plus wheat straw), treatment NPKSR (NPKS plus Ruilaite microbial inoculant) and treatment NPKSJ (NPKS plus Jinkuizi microbial inoculant). Results show that compared to NPK, NPKS increased seasonal CH{sub 4} emission by 280–1370%, while decreasing N{sub 2}O emission by 7–13%. When compared with NPKS, NPKSR and NPKSJ increased seasonal CH{sub 4} emission by 7–13% and 6–12%, respectively, whereas reduced N{sub 2}O emission by 10–27% and 9–24%, respectively. The higher CH{sub 4} emission could be attributed to the higher soil CH{sub 4} production potential triggered by the combined application of straw and microbial inoculant, and the lower N{sub 2}O emission to the decreased inorganic N content. As a whole, the benefit of lower N{sub 2}O emission was completely offset by increased CH{sub 4} emission, resulting in a higher GWP for NPKSR (5–12%) and NPKSJ (5–11%) relative to NPKS. Due to NPKSR and NPKSJ increased rice grain yield by 3–6% and 2–4% compared to NPKS, the GHGI values for NPKS, NPKSR and NPKSJ were comparable. These findings suggest that incorporating straw together with microbial inoculant would not influence the radiative forcing of rice production in the terms of per unit of rice grain yield relative to the incorporation of straw alone. - Highlights: • This paper presents 3-year measurements of CH

Liquid metal/metal oxide frameworks with incorporated Ga2O3 for photocatalysis.

Science.gov (United States)

Zhang, Wei; Naidu, Boddu S; Ou, Jian Zhen; O'Mullane, Anthony P; Chrimes, Adam F; Carey, Benjamin J; Wang, Yichao; Tang, Shi-Yang; Sivan, Vijay; Mitchell, Arnan; Bhargava, Suresh K; Kalantar-Zadeh, Kourosh

2015-01-28

Solvothermally synthesized Ga2O3 nanoparticles are incorporated into liquid metal/metal oxide (LM/MO) frameworks in order to form enhanced photocatalytic systems. The LM/MO frameworks, both with and without incorporated Ga2O3 nanoparticles, show photocatalytic activity due to a plasmonic effect where performance is related to the loading of Ga2O3 nanoparticles. Optimum photocatalytic efficiency is obtained with 1 wt % incorporation of Ga2O3 nanoparticles. This can be attributed to the sub-bandgap states of LM/MO frameworks, contributing to pseudo-ohmic contacts which reduce the free carrier injection barrier to Ga2O3.

Amo 1618 effects on incorporation of 14C-MVA and 14C-acetate into sterols in Nicotiana and Digitalis seedlings and cell-free preparations from Nicotiana

International Nuclear Information System (INIS)

Douglas, T.J.; Paleg, L.G.

1978-01-01

Incorporation of radioactivity from acetate-[ 14 C] and MVA-[ 14 C] into sterols and sterol precursors in tobacco was inhibited by Amo 1618; differing patterns of accumulation were obtained with the two precursors, suggesting more than one point of inhibition. This was borne out with cell-free preparations with which it was demonstrated that both HMG-CoA reductase and squalene-2,3-epoxide cyclase were inhibited, the latter more strongly than the former. GLC analysis of gross sterol and hydrocarbon fractions confirmed previous indications that incorporation of radioactivity into individual sterols was inhibited by Amo 1618. Finally, incorporation of MVA-[ 14 C] into sterols and sterol precursors of Digitalis was significantly altered by the retardant, thus expanding the generality of the relationship between sterol (particularly 4-desmethylsterol) biosynthesis inhibition and retardant effect. (author)

Incorporation of petroleum coke into red ceramic; Incorporacao de coque de petroleo em ceramica vermelha

Energy Technology Data Exchange (ETDEWEB)

Freitas, L.A. de; Monteiro, S.N.; Sanchez, R.; Vieira, C.M.F. [Laboratorio de Materiais Avancados - LAMAV, Universidade Estadual do Norte Fluminense Darcy Ribeiro - UENF, Campos dos Goytacazes, RJ (Brazil)], e-mails: sanchez@uenf.br, vieira@uenf.br

2011-04-15

This work has as its objective the evaluation of the effect of incorporation of petroleum coke in the physical and mechanical properties of red ceramic. Compositions were prepared with 0%, 1%, 2% and 4 wt.% of petroleum coke incorporated into a kaolinitic clayey body. Rectangular specimens were formed by extrusion to fire at 850 deg C and 1050 deg C. The determined physical and mechanical properties were flexural rupture strength and water absorption. The microstructure of the fired ceramics was evaluated by optical microscopy. The results show that the petroleum coke waste can significantly contribute to reduce the energy consumption during the firing stage. However, incorporations must be done in amounts around 1 wt.% to avoid deleterious effect on the water absorption of the ceramic. (author)

Effects of titanium surface anodization with CaP incorporation on human osteoblastic response

Science.gov (United States)

OLIVEIRA, Natássia Cristina Martins; MOURA, Camilla Christian Gomes; ZANETTA-BARBOSA, Darceny; MENDONÇA, Daniela Baccelli Silveira; MENDONÇA, Gustavo; DECHICHI, Paula

2015-01-01

In this study we investigated whether anodization with calcium phosphate (CaP) incorporation (Vulcano®) enhances growth factors secretion, osteoblast-specific gene expression, and cell viability, when compared to acid etched surfaces (Porous®) and machined surfaces (Screw®) after 3 and 7 days. Results showed significant cell viability for Porous and Vulcano at day 7, when compared with Screw (p=0.005). At the same time point, significant differences regarding runt-related transcription factor 2 (Runx2), alkaline phosphatase (ALP) and bone sialoprotein (BSP) expression were found for all surfaces (p0.05). Although no significant correlation was found for growth factors secretion and Runx2 expression, a significant positive correlation between this gene and ALP/BSP expression showed that their strong association is independent on the type of surface. The incorporation of CaP affected the biological parameters evaluated similar to surfaces just acid etched. The results presented here support the observations that roughness also may play an important role in determining cell response. PMID:23498218

The Incorporation of Ribonucleotides Induces Structural and Conformational Changes in DNA.

Science.gov (United States)

Meroni, Alice; Mentegari, Elisa; Crespan, Emmanuele; Muzi-Falconi, Marco; Lazzaro, Federico; Podestà, Alessandro

2017-10-03

Ribonucleotide incorporation is the most common error occurring during DNA replication. Cells have hence developed mechanisms to remove ribonucleotides from the genome and restore its integrity. Indeed, the persistence of ribonucleotides into DNA leads to severe consequences, such as genome instability and replication stress. Thus, it becomes important to understand the effects of ribonucleotides incorporation, starting from their impact on DNA structure and conformation. Here we present a systematic study of the effects of ribonucleotide incorporation into DNA molecules. We have developed, to our knowledge, a new method to efficiently synthesize long DNA molecules (hundreds of basepairs) containing ribonucleotides, which is based on a modified protocol for the polymerase chain reaction. By means of atomic force microscopy, we could therefore investigate the changes, upon ribonucleotide incorporation, of the structural and conformational properties of numerous DNA populations at the single-molecule level. Specifically, we characterized the scaling of the contour length with the number of basepairs and the scaling of the end-to-end distance with the curvilinear distance, the bending angle distribution, and the persistence length. Our results revealed that ribonucleotides affect DNA structure and conformation on scales that go well beyond the typical dimension of the single ribonucleotide. In particular, the presence of ribonucleotides induces a systematic shortening of the molecules, together with a decrease of the persistence length. Such structural changes are also likely to occur in vivo, where they could directly affect the downstream DNA transactions, as well as interfere with protein binding and recognition. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

Linear energy transfer incorporated intensity modulated proton therapy optimization

Science.gov (United States)

Cao, Wenhua; Khabazian, Azin; Yepes, Pablo P.; Lim, Gino; Poenisch, Falk; Grosshans, David R.; Mohan, Radhe

2018-01-01

The purpose of this study was to investigate the feasibility of incorporating linear energy transfer (LET) into the optimization of intensity modulated proton therapy (IMPT) plans. Because increased LET correlates with increased biological effectiveness of protons, high LETs in target volumes and low LETs in critical structures and normal tissues are preferred in an IMPT plan. However, if not explicitly incorporated into the optimization criteria, different IMPT plans may yield similar physical dose distributions but greatly different LET, specifically dose-averaged LET, distributions. Conventionally, the IMPT optimization criteria (or cost function) only includes dose-based objectives in which the relative biological effectiveness (RBE) is assumed to have a constant value of 1.1. In this study, we added LET-based objectives for maximizing LET in target volumes and minimizing LET in critical structures and normal tissues. Due to the fractional programming nature of the resulting model, we used a variable reformulation approach so that the optimization process is computationally equivalent to conventional IMPT optimization. In this study, five brain tumor patients who had been treated with proton therapy at our institution were selected. Two plans were created for each patient based on the proposed LET-incorporated optimization (LETOpt) and the conventional dose-based optimization (DoseOpt). The optimized plans were compared in terms of both dose (assuming a constant RBE of 1.1 as adopted in clinical practice) and LET. Both optimization approaches were able to generate comparable dose distributions. The LET-incorporated optimization achieved not only pronounced reduction of LET values in critical organs, such as brainstem and optic chiasm, but also increased LET in target volumes, compared to the conventional dose-based optimization. However, on occasion, there was a need to tradeoff the acceptability of dose and LET distributions. Our conclusion is that the

Effect of Pipe Flattening in API X65 Linepipe Steels Having Bainite vs. Ferrite/Pearlite Microstructures

Directory of Open Access Journals (Sweden)

Singon Kang

2018-05-01

Full Text Available The influence of microstructure on pipe flattening response was assessed using two different commercially produced U-ing, O-ing, and expansion (UOE pipes from API X65 steels having either a bainitic microstructure (steel B or a ferrite/pearlite microstructure (steel FP. A four-point bending apparatus and distinctive procedure were used to minimize strain localization during flattening. The flattened specimens were sectioned at different positions through the thickness, and tensile tested in both the longitudinal (LD and transverse directions (TD to assess the through-thickness variation in properties. Yield strength (YS distributions in the LD show V-shaped profiles through thickness in both steels, whereas the YS in the TD nearest the outside diameter (OD surface is reduced. These variations in YS are due to the Bauschinger effect associated with the compressive flattening pre-strain. The uniform elongation (UE of steel FP is almost independent of specimen position through the thickness, but for steel B there is a substantial reduction of the UE at both the inside and outside diameter positions and this reduction is greater in the LD. This work confirms that flattened pipe mechanical properties exhibit an important dependence on their microstructure type and it is postulated that the flattening procedure also influences the mechanical properties.

43 CFR 46.110 - Incorporating consensus-based management.

Science.gov (United States)

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Incorporating consensus-based management... § 46.110 Incorporating consensus-based management. (a) Consensus-based management incorporates direct... carry out those plans and activities. For the purposes of this Part, consensus-based management involves...

Antimicrobial and physical properties of chitosan films incorporated with turmeric extract.

Science.gov (United States)

Kalaycıoğlu, Zeynep; Torlak, Emrah; Akın-Evingür, Gülşen; Özen, İlhan; Erim, F Bedia

2017-08-01

In this study, the effects of turmeric extract incorporation on the antibacterial and physical properties of the chitosan films were evaluated. Turmeric containing chitosan-based film was produced with casting procedure and cross-linked with sodium sulfate. Mechanical, optical, thermal properties, and water vapor permeability of the films were studied. The addition of turmeric to chitosan film significantly increased the tensile strength of the film and improved the ultraviolet-visible light barrier of the film. Infrared spectroscopy analysis suggested an interaction between the phenolic compounds of the extract and amin group of chitosan. Antimicrobial activity of the chitosan films was studied against Salmonella and Staphylococcus aureus by plate count agar technique and a better antimicrobial activity was observed with turmeric incorporation. Turmeric incorporated chitosan films with enhanced antimicrobial activity and film stiffness can be suggested as a promising application for food packaging. Copyright © 2017 Elsevier B.V. All rights reserved.

Advancing Health Marketing Research and Policy Recommendations by Incorporating Source Perspectives.

Science.gov (United States)

Mackert, Michael; Guadagno, Marie; Champlin, Sara

2015-01-01

Communication researchers, recognizing the message sent is not necessarily the same as the message received, have incorporated the perspective of advertising professionals into the study of advertising effects. Health marketing research could similarly benefit from incorporating this largely absent perspective into the academic and policy debate surrounding the impact of advertising on health issues ranging from obesity to alcohol use. This commentary serves as a call to action to stakeholders in this academic and policy debate: focus on the perspective of advertising professionals to enrich health marketing and public health research in which advertising is the delivery vehicle for health messages.

Enhancing the soil organic matter pool through biomass incorporation

Science.gov (United States)

Felipe G. Sanchez; Emily A. Carter; John F. Klepac

2003-01-01

A study was installed in the Upper Coastal Plain of South Carolina, USA that sought to examine the impact of incorporating downed slash materials into subsoil layers on soil chemical and physical properties as compared with the effect of slash materials left on the soil surface. Baseline levels of slash were estimated by establishing transects within harvested stands...

Preparing Preservice Teachers to Incorporate Geospatial Technologies in Geography Teaching

Science.gov (United States)

Harte, Wendy

2017-01-01

This study evaluated the efficacy of geospatial technology (GT) learning experiences in two geography curriculum courses to determine their effectiveness for developing preservice teacher confidence and preparing preservice teachers to incorporate GT in their teaching practices. Surveys were used to collect data from preservice teachers at three…

Cytogenetic effects of tritium incorporated into DNA of human lymphocytes

Energy Technology Data Exchange (ETDEWEB)

Beno, M [Inst. of Preventive and Clinical Medicine, 83301 Bratislava (Slovakia)

1996-12-31

In the reported in vitro experiments the numbers of chromosomal aberrations (CA) in correlation to the physical dose as assessed by determining the specific radioactivity of DNA have been followed in vitro human lymphocytes from adult donors. Lymphocytes from healthy adult donors of age from 20 to 59 of both sexes (24 males and 20 females) were isolated from blood by centrifugation. After washing the cells were irradiated from tritium incorporated during in vitro incubation in phytohemagglutinin containing medium with tritium labelled thymidine. Slides for standard CA counting have been done from every sample 48 hours after the begin cultivation. The CA were counted in at least 200 metaphases on each slide. Parallel samples of lymphocytes served for preparation smears for autoradiography to determine the labeling index. Other parallel samples were used for the determination of tritium concentration in DNA by the diphenylamine method, as well as determination of the specific radioactivity in lymphocyte DNA by scintillation counting. The dose absorbed in DNA was estimated using the conversion factor implicating that 37 kBq of tritium uniformly distributed per gram of tissue of unit density delivers a dose rate of 121.4 {sup m}i{sup G}y/hour. The contamination of cells by precursors of nucleic acids - like tritiated thymidine - causes an uneven distribution of doses in the cell population. A proportion of the population of cells remains unlabelled. The dose-response curve is flat showing signs of loss of heavily damaged cells and signs of repair of damage. Both these signs are based on the nature of biological processes which lead to internal contamination of cells and to expression of effects in terms of numbers of CA. (J.K.) 5 figs., 4 refs.

Reionization on large scales. IV. Predictions for the 21 cm signal incorporating the light cone effect

Energy Technology Data Exchange (ETDEWEB)

La Plante, P.; Battaglia, N.; Natarajan, A.; Peterson, J. B.; Trac, H. [McWilliams Center for Cosmology, Department of Physics, Carnegie Mellon University, Pittsburgh, PA 15213 (United States); Cen, R. [Department of Astrophysical Science, Princeton University, Princeton, NJ 08544 (United States); Loeb, A., E-mail: plaplant@andrew.cmu.edu [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA 02138 (United States)

2014-07-01

We present predictions for the 21 cm brightness temperature power spectrum during the Epoch of Reionization (EoR). We discuss the implications of the 'light cone' effect, which incorporates evolution of the neutral hydrogen fraction and 21 cm brightness temperature along the line of sight. Using a novel method calibrated against radiation-hydrodynamic simulations, we model the neutral hydrogen density field and 21 cm signal in large volumes (L = 2 Gpc h {sup –1}). The inclusion of the light cone effect leads to a relative decrease of about 50% in the 21 cm power spectrum on all scales. We also find that the effect is more prominent at the midpoint of reionization and later. The light cone effect can also introduce an anisotropy along the line of sight. By decomposing the 3D power spectrum into components perpendicular to and along the line of sight, we find that in our fiducial reionization model, there is no significant anisotropy. However, parallel modes can contribute up to 40% more power for shorter reionization scenarios. The scales on which the light cone effect is relevant are comparable to scales where one measures the baryon acoustic oscillation. We argue that due to its large comoving scale and introduction of anisotropy, the light cone effect is important when considering redshift space distortions and future application to the Alcock-Paczyński test for the determination of cosmological parameters.

Modification by oral contraceptives in rat of 14C acetate incorporation into platelet lipids

International Nuclear Information System (INIS)

Ciavatti, M.; Renaud, S.

1979-01-01

The in vitro incorporation of acetate 14 C in platelet lipids was compared in control female rats (Gr.I) to rats treated for 4 days either by an oral contraceptive ethinyl oestradiol + lynestrenol (Gr.II), or by ethinyl oestradiol alone (Gr.III) or lynestrenol alone (Gr.IV). An increase of 43-45% in the incorporation of acetate could be ovserved in the two groups (II and III) which received ethinyl oestradiol, while the incorporation in group IV was similar to that of the controls. The lipid fractions of which the synthesis was the most considerably stimulated by the oestrogen treatment, were the neutral lipids as separated from the other lipids by TLC. In groups II and III the incorporation in cholesterol and cholesterol esters was increased by 8 fold and by 10 fold in the free fatty acid fraction. In these two groups, even in the phospholipid fractions PS + PI and PE, the radioactivity was significantly increased. The observed effect of the oral contraceptive studied here on platelet lipid synthesis in female rats, appears to be essentially due to the estrogens, since lynestrenol had only minimal effects in that respect. (orig.) [de

Rationally evolving tRNAPyl for efficient incorporation of noncanonical amino acids.

Science.gov (United States)

Fan, Chenguang; Xiong, Hai; Reynolds, Noah M; Söll, Dieter

2015-12-15

Genetic encoding of noncanonical amino acids (ncAAs) into proteins is a powerful approach to study protein functions. Pyrrolysyl-tRNA synthetase (PylRS), a polyspecific aminoacyl-tRNA synthetase in wide use, has facilitated incorporation of a large number of different ncAAs into proteins to date. To make this process more efficient, we rationally evolved tRNA(Pyl) to create tRNA(Pyl-opt) with six nucleotide changes. This improved tRNA was tested as substrate for wild-type PylRS as well as three characterized PylRS variants (N(ϵ)-acetyllysyl-tRNA synthetase [AcKRS], 3-iodo-phenylalanyl-tRNA synthetase [IFRS], a broad specific PylRS variant [PylRS-AA]) to incorporate ncAAs at UAG codons in super-folder green fluorescence protein (sfGFP). tRNA(Pyl-opt) facilitated a 5-fold increase in AcK incorporation into two positions of sfGFP simultaneously. In addition, AcK incorporation into two target proteins (Escherichia coli malate dehydrogenase and human histone H3) caused homogenous acetylation at multiple lysine residues in high yield. Using tRNA(Pyl-opt) with PylRS and various PylRS variants facilitated efficient incorporation of six other ncAAs into sfGFP. Kinetic analyses revealed that the mutations in tRNA(Pyl-opt) had no significant effect on the catalytic efficiency and substrate binding of PylRS enzymes. Thus tRNA(Pyl-opt) should be an excellent replacement of wild-type tRNA(Pyl) for future ncAA incorporation by PylRS enzymes. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

Effects of cover crops incorporation and nitrogen fertilization on N2O and CO2 emissions

Science.gov (United States)

Kandel, T. P.; Gowda, P. H.; Northup, B. K.; DuPont, J.; Somenahally, A. C.; Rocateli, A.

2017-12-01

In this study, we measured N2O and CO2 fluxes from plots planted to hairy vetch (winter cover crop) and broadleaf vetch (spring cover crop) as N sources for the following crabgrass (summer forage crop) in El Reno, Oklahoma, USA. Comparisons also included 0 and 60 kg ha-1 mineral N fertilizer supplied as dry urea. No significant N2O fluxes were observed during rapid growing periods of cover crops (March-April, 2017), however, large fluxes were observed after hairy vetch incorporation. Immediately after the hairy vetch biomass incorporation, large rainfall events were recorded. The fluxes subsided gradually with drying soil condition but were enhanced after every consecutive rainfall events. A rainfall induced flux measuring up to 8.2 kg N2O ha-1 day-1 was observed after 26 days of biomass incorporation. In total, 29 kg N2O ha-1 (18 kg N ha-1) was emitted within a month after biomass incorporation from hairy vetch plots. Growth of broadleaf vetch was poor and N2O fluxes were also lower. Similarly, plots fertilized with 60 kg N ha-1 had significant fluxes of N2O but the magnitude was much lower than the hairy vetch plots. Dynamics of N2O and CO fluxes correlated strongly. The results thus indicated that although cover crops may provide many environmental/agronomic benefits such as N fixation, soil carbon built-up, weed suppression and erosion control, high N2O emissions may dwarf these benefits.

A Novel Method for Incorporation of Micron-Sized SiC Particles into Molten Pure Aluminum Utilizing a Co Coating

Science.gov (United States)

Mohammadpour, M.; Khosroshahi, R. Azari; Mousavian, R. Taherzadeh; Brabazon, D.

2015-02-01

Ceramic particles typically do not have sufficiently high wettability by molten metal for effective bonding during metal matrix composite fabrication. In this study, a novel method has been used to overcome this drawback. Micron-sized SiC particles were coated by a cobalt metallic layer using an electroless deposition method. A layer of cobalt on the SiC particles was produced prior to incorporation in molten pure aluminum in order to improve the injected particle bonding with the matrix. For comparison, magnesium was added to the melt in separate experiments as a wetting agent to assess which method was more effective for particle incorporation. It was found that both of these methods were more effective as regard ceramic particulate incorporation compared with samples produced with as-received SiC particles injected into the pure aluminum matrix. SEM images indicated that cobalt coating of the particles was more effective than magnesium for incorporation of fine SiC particles (below 30 µm), while totally the incorporation percentage of the particles was higher for a sample in which Mg was added as a wetting agent. In addition, microhardness tests revealed that the cobalt coating leads to the fabrication of a harder composite due to increased amount of ceramic incorporation, ceramic-matrix bonding, and possibly also to formation of Al-Co intermetallic phases.

The endozepine ODN stimulates [3H]thymidine incorporation in cultured rat astrocytes

International Nuclear Information System (INIS)

Gandolfo, P.; Patte, C.; Thoumas, J.L.; Leprince, J.; Vaudry, H.; Tonon, M.C.

1999-01-01

High concentrations of diazepam-binding inhibitor (DBI) mRNA have been detected in astrocytoma, suggesting that DBI-derived peptides may play a role in glial cell proliferation. In the present study, we have investigated the effect of a processing product of DBI, the octadecaneuropeptide ODN, on DNA synthesis in cultured rat astrocytes. At very low concentrations (10 -14 to 10 -11 M), ODN caused a dose-dependent increase of [ 3 H]thymidine incorporation. At higher doses (10 -10 to 10 -5 M), the effect of ODN gradually declined. The central-type benzodiazepine receptor antagonist flumazenil (10 -6 M) completely suppressed the stimulatory action of ODN whereas the peripheral-type benzodiazepine receptor ligand, PK11195 (10 -6 M) had no effect. The ODN-induced stimulation of [ 3 H]thymidine incorporation was mimicked by methyl 6,7-dimethoxy-4-ethyl-β-carboline-3-carboxylate (DMCM). The GABA A receptor antagonist bicuculline (10 -4 M) suppressed the effect of both ODN and DMCM on DNA synthesis. Exposure of cultured astrocytes to the specific GABA A agonist 3APS (10 -10 to 10 -4 M) also induced a dose-related increase of [ 3 H]thymidine incorporation. The present study indicates that ODN, acting through central-type benzodiazepine receptors associated with the GABA A receptor complex, stimulates DNA synthesis in rat glial cells. These data provide evidence for an autocrine role of endozepines in the control of glial cell proliferation. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

Effect of Gelatin-Based Edible Coatings Incorporated with Aloe vera and Black and Green Tea Extracts on the Shelf Life of Fresh-Cut Oranges

Directory of Open Access Journals (Sweden)

Mohsen Radi

2017-01-01

Full Text Available The aim of this study was to evaluate the effect of gelatin coating incorporated with Aloe vera gel (50,100% and green and black tea extracts (5,10% on physicochemical, microbial, and sensorial properties of fresh-cut oranges at 4°C for 17 days. Significant differences in terms of quality parameters were observed between the control and coated fresh-cut oranges. The highest variation of quality parameters was observed in control, while the least variations were observed in coated slices with 100% Aloe vera and 10% green tea extract. The weight loss was increased with time, but the coating treatment especially with 100% Aloe vera had significant effect on the prevention of weight loss. Also, Aloe vera coated samples obtained the highest score in sensory evaluation. Coating with gelatin incorporated with Aloe vera and green tea extracts successfully retarded the microbial growth and therefore extended the shelf life of fresh-cut oranges during cold storage.

The effects of nitrogen incorporation on the properties of atomic layer deposited Ru thin films as a direct-plateable diffusion barrier for Cu interconnect

Energy Technology Data Exchange (ETDEWEB)

Mun, Ki-Yeung [School of Materials Science and Engineering, Yeungnam University, 214-1 Dae-dong, Gyeongsan-si, Gyeongsangbuk-do 712-749 (Korea, Republic of); Hong, Tae Eun [Busan Center, Korea Basic Science Institute, 1275 Jisadong, Gangseogu, Busan 618-230 (Korea, Republic of); Cheon, Taehoon [School of Materials Science and Engineering, Yeungnam University, 214-1 Dae-dong, Gyeongsan-si, Gyeongsangbuk-do 712-749 (Korea, Republic of); Center for Core Research Facilities, Daegu Gyeongbuk Institute of Science and Technology, Sang-ri, Hyeonpung-myeon, Dalseong-gun, Daegu (Korea, Republic of); Jang, Yujin [School of Materials Science and Engineering, Yeungnam University, 214-1 Dae-dong, Gyeongsan-si, Gyeongsangbuk-do 712-749 (Korea, Republic of); Lim, Byoung-Yong; Kim, Sunjung [School of Materials Science and Engineering, University of Ulsan, Mugeo-dong, Nam-go, Ulsan 680-749 (Korea, Republic of); Kim, Soo-Hyun, E-mail: soohyun@ynu.ac.kr [School of Materials Science and Engineering, Yeungnam University, 214-1 Dae-dong, Gyeongsan-si, Gyeongsangbuk-do 712-749 (Korea, Republic of)

2014-07-01

N-incorporated Ru films were deposited by atomic layer deposition (ALD) at a deposition temperature of 270 °C using 1-isopropyl-4-methylbenzene-cyclohexa-1,3-dienyl ruthenium and N{sub 2}/H{sub 2} mixture plasma as the precursor and reactant, respectively. The N content in the ALD-Ru films was controlled by changing the gas ratio [N{sub 2} versus the total gas (N{sub 2} + H{sub 2}) flow rates] in the reactant from 0.82 to 1. Secondary ion mass spectrometry depth profiling revealed an increase in N content in the film with increasing gas ratio. The amount of N in the ALD-Ru films had a considerable effect on the film properties, such as resistivity, crystallinity and microstructure. Although the resistivity of the pure ALD-Ru film was ∼ 19 μΩ cm, the N-incorporated ALD-Ru films deposited with a gas ratio of 0.86 (N/Ru: ∼ 0.38) showed a resistivity of ∼ 340 μΩ cm, which increased continuously with increasing gas ratio. X-ray and electron diffraction revealed degradation in film crystallinity and decrease in grain size with increasing N incorporation into ALD-Ru films. Transmission electron microscopy showed that N-incorporated ALD-Ru films formed nanocrystalline and non-columnar grain structures. This is in contrast to that observed in the pure ALD-Ru film, which had a polycrystalline columnar grain structure. The growth rate of a representative N-incorporated Ru film deposited with a gas ratio of 0.86 showed a linear dependency on the number of ALD cycles; growth rate of 0.051 nm/cycle at short incubation cycles of ∼ 3. The step coverage was approximately 98% over the trench structure (aspect ratio: 4.5) with a top opening width of 25 nm. The direct plating of Cu on an optimized N-incorporated ALD-Ru film (5 nm in thickness) was possible. The structure of Cu (80 nm)/N-incorporated ALD-Ru (8 nm)/Si was found to be stable without the formation of copper silicide after annealing at 600 °C for 30 min. - Highlights: • Controlled growth of N-incorporated

The effects of temperature and water concentration on the otolith incorporation of barium and manganese in black rockfish Sebastes melanops.

Science.gov (United States)

Miller, J A

2009-07-01

Observations of multiple years of geographic variation in [Ba:Ca](otolith) and [Mn:Ca](otolith) in black rockfish Sebastes melanops prompted this study to examine the effects of temperature and water concentration on the otolith incorporation of Ba and Mn in this wholly marine species. The replicated experiment design consisted of two water temperatures (7.4 and 13.0 degrees C) and four water concentrations of Ba:Ca and Mn:Ca. A positive, linear relationship between [Ba:Ca](water) and [Ba:Ca](otolith) was observed at both temperatures. A positive temperature effect was also observed with mean partition coefficients for Ba (D(Ba)) greater in the 13 degrees C than in the 7.4 degrees C treatments (mean = 0.061 and 0.048, respectively). There was no relationship between [Mn:Ca](water) and [Mn:Ca](otolith) although a negative temperature effect was observed. Mean partition coefficients for Mn (D(Mn)) were lower in the 13 degrees C than in the 7.4 degrees C treatments (mean = 0.027 and 0.036, respectively). The data presented support the assumption of a positive, linear relationship between water and otolith Metal:Ca concentrations for Ba:Ca but not for Mn:Ca. Thus, although indicative of residence in distinct water masses, observed variation in [Metal:Ca](otolith) may not reflect variation in water concentration and can be affected by temperature. Caution should be applied in the interpretation of geographic variation of [Mn:Ca](otolith) until the mechanisms regulating its incorporation are more fully understood.

Effects of incorporation of nano-fluorapatite or nano-fluorohydroxyapatite on a resin-modified glass ionomer cement.

Science.gov (United States)

Lin, Jun; Zhu, Jiajun; Gu, Xiaoxia; Wen, Wenjian; Li, Qingshan; Fischer-Brandies, Helge; Wang, Huiming; Mehl, Christian

2011-03-01

This study aimed to investigate the fluoride release properties and the effect on bond strength of two experimental adhesive cements. Synthesized particles of nano-fluorapatite (nano-FA) or nano-fluorohydroxyapatite (nano-FHA) were incorporated into a resin-modified glass ionomer cement (Fuji Ortho LC) and characterized using X-ray diffraction and scanning electron microscopy. Blocks with six different concentrations of nano-FA or nano-FHA were manufactured and their fluoride release properties evaluated by ultraviolet spectrophotometry. The unaltered glass ionomer cement Fuji Ortho LC (GC, control) and the two experimental cements with the highest fluoride release capacities (nano-FA+Fuji Ortho LC (GFA) and nano-FHA+Fuji Ortho LC (GFHA)) were used to bond composite blocks and orthodontic brackets to human enamel. After 24 h water storage all specimens were debonded, measuring the micro-tensile bond strength (μTBS) and the shear bond strength (SBS), respectively. The optimal concentration of added nano-FA and nano-FHA for maximum fluoride release was 25 wt.%, which nearly tripled fluoride release after 70 days compared with the control group. GC exhibited a significantly higher SBS than GFHA/GFA, with GFHA and GFA not differing significantly (P>0.05). The μTBS of GC and GFA were significantly higher than that of GFHA (P≤0.05). The results seem to indicate that the fluoride release properties of Fuji Ortho LC are improved by incorporating nano-FA or nano-FHA, simultaneously maintaining a clinically sufficient bond strength when nano-FA was added. Copyright © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Effect of titanium incorporation on the structural, mechanical and biocompatible properties of DLC thin films prepared by reactive-biased target ion beam deposition method

International Nuclear Information System (INIS)

Bharathy, P. Vijai; Nataraj, D.; Chu, Paul K.; Wang, Huaiyu; Yang, Q.; Kiran, M.S.R.N.; Silvestre-Albero, J.; Mangalaraj, D.

2010-01-01

Amorphous diamond like carbon (DLC) and titanium incorporated diamond like carbon (Ti-DLC) thin films were deposited by using reactive-biased target ion beam deposition method. The effects of Ti incorporation and target bias voltage on the microstructure and mechanical properties of the as-deposited films were investigated by means of X-ray photoelectron spectroscopy, Raman spectroscopy, transmission electron microscopy and nano-indentation. It was found that the Ti content in Ti-DLC films gets increased with increasing target bias voltage. At about 4.2 at.% of Ti, uniform sized well dispersed nanocrystals were seen in the DLC matrix. Using FFT analysis, a facility available in the TEM, it was found that the nanocrystals are in cubic TiC phase. Though at the core, the incorporated Ti atoms react with carbon to form cubic TiC; most of the surface exposed Ti atoms were found to react with the atmospheric oxygen to form weakly bonded Ti-O. The presence of TiC nanocrystals greatly modified the sp 3 /sp 2 hybridized bonding ratio and is reflected in mechanical hardness of Ti-DLC films. These films were then tested for their biocompatibility by an invitro cell culturing test. Morphological observation and the cell proliferation test have demonstrated that the human osteoblast cells well attach and proliferate on the surface of Ti incorporated DLC films, suggesting possible applications in bone related implant coatings.

Effects of Incorporation of Jackfruit Rind Powder on Chemical and Functional Properties of Bread.

Science.gov (United States)

Felli, Reza; Yang, Tajul Aris; Abdullah, Wan Nadiah Wan; Zzaman, Wahidu

2018-03-01

Nowadays, there is a rising interest towards consuming health beneficial food products. Bread-as one of the most popular food products-could be improved to 'healthy bread' by addition of ingredients high in protein, dietary fiber and low in calorie. Incorporating Jackfruit rind powder (JRP) as a by-product rich in dietary fiber in bread, could not only provide health beneficial bread products, but also lead to develop an environmental friendly technology by solving the problem of waste disposal of residues. In this study, addition of jackfruit rind powder (JRP) as a high dietary fiber and functional ingredient in bread was examined. The results showed that incorporation of JRP in bread improved functional properties of flour such as Oil Holding Capacity (OHC), Water Holding Capacity (WHC) and pasting properties. Addition of 5%, 10% and 15% of JRP in wheat flour caused significantly (p bread products. Results from proximate composition indicated that all breads substituted with JRP, contained significantly (p bread products.

Incorporating Employee Heterogeneity into Default Rules for Retirement Plan Selection

Science.gov (United States)

Goda, Gopi Shah; Manchester, Colleen Flaherty

2013-01-01

We study the effect of incorporating heterogeneity into default rules by examining the choice between retirement plans at a firm that transitioned from a defined benefit (DB) to a defined contribution (DC) plan. The default plan for existing employees varied discontinuously depending on their age. Employing regression discontinuity techniques,…

Antitumor activity of vorinostat-incorporated nanoparticles against human cholangiocarcinoma cells.

Science.gov (United States)

Kwak, Tae Won; Kim, Do Hyung; Jeong, Young-Il; Kang, Dae Hwan

2015-09-26

The aim of this study is to evaluate the anticancer activity of vorinostat-incorporated nanoparticles (vorinostat-NPs) against HuCC-T1 human cholangiocarcinoma cells. Vorinostat-NPs were fabricated by a nanoprecipitation method using poly(DL-lactide-co-glycolide)/poly(ethylene glycol) copolymer. Vorinostat-NPs exhibited spherical shapes with sizes Vorinostat-NPs have anticancer activity similar to that of vorinostat in vitro. Vorinostat-NPs as well as vorinostat itself increased acetylation of histone-H3. Furthermore, vorinostat-NPs have similar effectiveness in the suppression or expression of histone deacetylase, mutant type p53, p21, and PARP/cleaved caspase-3. However, vorinostat-NPs showed improved antitumor activity against HuCC-T1 cancer cell-bearing mice compared to vorinostat, whereas empty nanoparticles had no effect on tumor growth. Furthermore, vorinostat-NPs increased the expression of acetylated histone H3 in tumor tissue and suppressed histone deacetylase (HDAC) expression in vivo. The improved antitumor activity of vorinostat-NPs can be explained by molecular imaging studies using near-infrared (NIR) dye-incorporated nanoparticles, i.e. NIR-dye-incorporated nanoparticles were intensively accumulated in the tumor region rather than normal one. Our results demonstrate that vorinostat and vorinostat-NPs exert anticancer activity against HuCC-T1 cholangiocarcinoma cells by specific inhibition of HDAC expression. Thus, we suggest that vorinostat-NPs are a promising candidate for anticancer chemotherapy in cholangiocarcinoma. Graphical abstract Local delivery strategy of vorinostat-NPs against cholangiocarcinomas.

Development and phytochemical content analysis of bun incorporated with Kappaphycus Alvarezii seaweed powder

Science.gov (United States)

Sasue, Anita; Kasim, Zalifah Mohd

2016-11-01

Consumer awareness of the importance of functional foods has greatly grown in the past years. Functional foods with elevated levels of antioxidants are of high demand because of its associated health benefits. As bread is a common component in our daily diet, it may be convenient food to deliver antioxidants at a high concentration. The main approach of this study is to incorporate Kappaphycus alvarezii seaweed powder (SWP) and white flour in the bun formulation in order to develop seaweed bun with higher level of phytochemicals. The fresh Kappaphycus alvarezii seaweeds were washed, soaked in distilled water overnight, dried in a cabinet dryer at 40°C for 24 hours and ground into fine powder using universal miller. There were five different percentages of SWP incorporated into bun that were formulation A - control (0% SWP), B (3% SWP), C (6% SWP), D (9% SWP) and E (12% SWP). All the samples were undergone texture, total phenolic content and DPPH analysis. Seaweed concentration had most significant effect on phytochemical constituents of the bun with TPC (35.07 GAE, mg/100g) and DPPH activity (49.02%) maximized when 12% SWP was incorporated into the flour (P<0.05). The incorporation of the SWP also gives significant effects towards the texture of the bun where the bun becomes harder and denser as compared to the control.

Radionuclide Incorporation and Long Term Performance of Apatite Waste Forms

Energy Technology Data Exchange (ETDEWEB)

Wang, Jianwei [Louisiana State Univ., Baton Rouge, LA (United States); Lian, Jie [Rensselaer Polytechnic Inst., Troy, NY (United States); Gao, Fei [Univ. of Michigan, Ann Arbor, MI (United States)

2016-01-04

This project aims to combines state-of-the-art experimental and characterization techniques with atomistic simulations based on density functional theory (DFT) and molecular dynamics (MD) simulations. With an initial focus on long-lived I-129 and other radionuclides such as Cs, Sr in apatite structure, specific research objectives include the atomic scale understanding of: (1) incorporation behavior of the radionuclides and their effects on the crystal chemistry and phase stability; (2) stability and microstructure evolution of designed waste forms under coupled temperature and radiation environments; (3) incorporation and migration energetics of radionuclides and release behaviors as probed by DFT and molecular dynamics (MD) simulations; and (4) chemical durability as measured in dissolution experiments for long term performance evaluation and model validation.

Photosynthetic incorporation of 14C by Stevia rebaudiana

International Nuclear Information System (INIS)

Ferraresi, M. de L.; Ferraresi Filho, O.; Bracht, A.

1985-01-01

The photosynthetic incorporation of 14 by Stevia rebaudiana specimens was investigated. The 14 C incorporation, when the isotope was furnished to the plant in form of 14 CO 2 , was rapid. After 24 hours, the radioactivity has been incorporated into a great number of compounds including pigments, terpenes, glucose, cellulose and also stevioside and its derivatives. (M.A.C.) [pt

Evaluation of finger millet incorporated noodles for nutritive value and glycemic index.

Science.gov (United States)

Shukla, Kamini; Srivastava, Sarita

2014-03-01

The present study was undertaken to develop finger millet incorporated noodles for diabetic patients. Finger millet variety VL-149 was taken. The finger millet flour and refined wheat flour (RWF) were evaluated for nutrient composition. The finger millet flour (FMF) was blended in various proportions (30 to 50%) in refined wheat flour and used for the preparation of noodles. Control consisted of RWF noodles. Sensory quality and nutrient composition of finger millet noodles was evaluated. The 30% finger millet incorporated noodles were selected best on the basis of sensory evaluation. Noodles in that proportion along with control were evaluated for glycemic response. Nutrient composition of noodles showed that 50% finger millet incorporated noodles contained highest amount of crude fat (1.15%), total ash (1.40%), crude fiber (1.28%), carbohydrate (78.54%), physiological energy (351.36 kcal), insoluble dietary fiber (5.45%), soluble dietary fiber (3.71%), iron (5.58%) and calcium (88.39%), respectively. However, control RWF noodles contained highest amount of starch (63.02%), amylose (8.72%) and amylopectin (54.29%). The glycemic index (GI) of 30% finger millet incorporated noodles (best selected by sensory evaluation) was observed significantly lower (45.13) than control noodles (62.59). It was found that finger millet flour incorporated noodles were found nutritious and showed hypoglycemic effect.

Incorporation of Certain Hydrophobic Excipients in the Core of Melt ...

African Journals Online (AJOL)

Patrick Erah

incorporation of hydrophobic materials (talc or magnesium stearate) in the core of such granules may further retard .... (500mg) was filled into a capsule shell and ... of the drug particles. The effect of melt granulation on the release profiles of paracetamol is shown in Fig 1. The melt granulations displayed a retarded release.

Anisotropic yield surfaces in bi-axial cyclic plasticity

International Nuclear Information System (INIS)

Rider, R.J.; Harvey, S.J.; Breckell, T.H.

1985-01-01

Some aspects of the behaviour of yield surfaces and work-hardening surfaces occurring in biaxial cyclic plasticity have been studied experimentally and theoretically. The experimental work consisted of subjecting thin-walled tubular steel specimens to cyclic plastic torsion in the presence of sustained axial loads of various magnitudes. The experimental results show that considerable anisotropy is induced when the cyclic shear strains are dominant. Although the true shapes of yield and work-hardening surfaces can be very complex, a mathematical model is presented which includes both anisotropy and Bauschinger effects. The model is able to qualitatively predict the deformation patterns during a cycle of applied plastic shear strain for a range of sustained axial stresses and also indicate the material response to changes in axial stress. (orig.)

Cyclic testing of thin Ni films on a pre-tensile compliant substrate

Energy Technology Data Exchange (ETDEWEB)

Wei, He [Department of Mechanics, Tianjin University, 135 Yaguan Rd, Jinnan, 300350 Tianjin (China); Département Physique et Mécanique d es Matériaux, Institut Pprime, CNRS–Université de Poitiers, Bd Marie et Pierre Curie, Futuroscope, 86962 (France); Renault, Pierre-Olivier, E-mail: pierre.olivier.renault@univ-poitiers.fr [Département Physique et Mécanique d es Matériaux, Institut Pprime, CNRS–Université de Poitiers, Bd Marie et Pierre Curie, Futuroscope, 86962 (France); Bourhis, Eric Le [Département Physique et Mécanique d es Matériaux, Institut Pprime, CNRS–Université de Poitiers, Bd Marie et Pierre Curie, Futuroscope, 86962 (France); Wang, Shibin [Department of Mechanics, Tianjin University, 135 Yaguan Rd, Jinnan, 300350 Tianjin (China); Goudeau, Philippe [Département Physique et Mécanique d es Matériaux, Institut Pprime, CNRS–Université de Poitiers, Bd Marie et Pierre Curie, Futuroscope, 86962 (France)

2017-05-17

A novel experimental approach to study the cyclic plastic deformation of thin metallic films is presented. 300 nm thick Ni films are deposited on both sides of a pre-tensile soft substrate which allows to deform the films alternately in tension and compression (approximately from +2.7 GPa down to −2 GPa) relative to the as-deposited residual stress state. Nanocrystalline thin films' intrinsic elastic strains (or stresses) and true strains have been measured step by step during two loading/unloading cycles thanks to the X-ray diffraction (XRD) and digital image correlation (DIC) techniques respectively. From the first cyclic deformation, a significant Bauschinger effect is evidenced in the films, however, little or no cyclic hardening is observed during the two cyclic tests.

A general shakedown theorem for elastic/plastic bodies with work hardening

International Nuclear Information System (INIS)

Ponter, A.R.S.

1975-01-01

In recent years the design of metallic structures under variable loading has been assisted by the application of Melan's lower bound theorem for the shakedown on an elastic/perfectly plastic structure. The design codes for both portal frames and pressure vessels have taken account of such calculations. The theory of shakedown suffers from two defects, geometry changes are ignored and the material behaviour is described by a perfectly plastic constitutive relationship which includes neither work hardening nor the Bauschinger effect. This paper is concerned with the latter problem. A very general lower bound shakedown theorem is derived for an arbitrary time-independent material in terms of functional properties of the constitutive relationship. The theorem is then applied to perfect, isotropic and kinematic hardening plasticity. (Auth.)

Effect of heat treatment on the structure of incorporated oxalate species and photoluminescent properties of porous alumina films formed in oxalic acid

Science.gov (United States)

Vrublevsky, I.; Jagminas, A.; Hemeltjen, S.; Goedel, W. A.

2008-09-01

The present work focuses on the use of IR spectroscopy and photoluminescence spectral measurements for studying the treatment temperature effect on the compositional and luminescent properties of oxalic acid alumina films. In line with the recent researches we have also found that heat treatment of porous alumina films formed in oxalic acid leads to considerable changes in their photoluminescence properties: upon annealing the intensity of photoluminescence (PL) increases reaching a maximum at the temperature of around 500 °C and then decreases. IR spectra of as-grown and heat-treated films have proved that PL emission in the anodic alumina films is related with the state of 'structural' oxalate species incorporated in the oxide lattice. These results allowed us to conclude that PL behavior of oxalic acid alumina films can be explained through the concept of variations in the bonding molecular orbitals of incorporated oxalate species including σ- and π-bonds.

Internal stresses in an austeno-ferritic duplex stainless steel

International Nuclear Information System (INIS)

Verhaeghe, B.; Brechet, Y.; Louchet, F.; Massoud, J.P.; Touzeau, D.

1996-04-01

Austeno-ferritic duplex steels possess microstructures containing comparable volume fractions of hard and soft phases which are bi-percolated. They are therefore liable to develop large internal stresses during straining. The evolution and the relaxation of these stresses and the occurrence of damage are characterized using Bauschinger tests. Thermally aged and non-aged material behaviour are compared. Plastic flow in the hard phase is shown to be significantly efficient in releasing these internal stresses. (authors). 15 refs., 8 figs

The effects of oat β-glucan incorporation on the quality, structure, consumer acceptance and glycaemic response of steamed bread.

Science.gov (United States)

Wang, Lei; Ye, Fayin; Feng, Liyuan; Wei, Fubin; Zhao, Guohua

2017-12-01

The objective of this study was to evaluate the effects of the incorporation of oat β-glucan (OβG) on the sensory and nutritional quality of steamed bread. Wheat flour was substituted with OβG at levels varying from 0 g/100 g to 5 g/100 g. The results showed that the products containing 1 g/100 g and 3 g/100 g OβG produced a comparable overall consumer acceptance while a significantly lower score was given to the product with 5 g/100 g. Nutritionally, the presence of OβG impeded in vitro starch hydrolysis by amylolytic enzymes. More importantly, the addition of OβG up to 5 g/100 g did bring about a lower in vitro predicted glycaemic index to steamed bread, but it generated insignificant effects on the in vivo glycaemic response. The current work first demonstrated the feasibility of fabricating OβG-enriched steamed bread and its nutritional superiority compared to the corresponding normal product. Modern methods of food elaboration and processing frequently reduce the content of dietary fiber (DF). Despite the well-known health benefits of DF consumption, average intake levels still fall far below recommended ones. Oat β-glucan (OβG) is a kind of indigestible polysaccharide with diverse bioactivity. This article evaluated the effects of OβG incorporation on quality, structure, consumer acceptance, and glycaemic response of steamed bread. The addition of less than 3 g/100 g of OβG had negligible effects on the consumer acceptance of steamed bread. The enrichment at 5 g/100 g indeed deteriorated the consumer acceptance. Moreover, OβG highly lowered the glycaemic response of steamed bread. The current work first demonstrated the feasibility of fabricating OβG-enriched steamed bread and its nutritional superiority compared to the corresponding normal product. OβG enriched steamed bread may offer an alternative to improve DF intake of residents. © 2017 Wiley Periodicals, Inc.

Effects of nisin-incorporated films on the microbiological and physicochemical quality of minimally processed mangoes.

Science.gov (United States)

Barbosa, Ana Andréa Teixeira; Silva de Araújo, Hyrla Grazielle; Matos, Patrícia Nogueira; Carnelossi, Marcelo Augusto Guitierrez; Almeida de Castro, Alessandra

2013-06-17

The aim of this study is to examine the effects of nisin-incorporated cellulose films on the physicochemical and microbiological qualities of minimally processed mangoes. The use of antimicrobial films did not affect the physicochemical characteristics of mangoes and showed antimicrobial activity against Staphylococcus aureus, Listeria monocytogenes, Alicyclobacillus acidoterrestris and Bacillus cereus. The mango slices were inoculated with S. aureus and L. monocytogenes (10(7)CFU/g), and the viable cell numbers remained at 10(5) and 10(6)CFU/g, respectively, after 12days. In samples packed with antimicrobial films, the viable number of L. monocytogenes cells was reduced below the detection level after 4days. After 6days, a reduction of six log units was observed for S. aureus. In conclusion, nisin showed antimicrobial activity in mangoes without interfering with the organoleptic characteristics of the fruit. This result suggests that nisin could potentially be used in active packing to improve the safety of minimally processed mangoes. Copyright © 2013 Elsevier B.V. All rights reserved.

Inhibition of Listeria monocytogenes ATCC 19115 on ham steak by tea bioactive compounds incorporated into chitosan-coated plastic films

Directory of Open Access Journals (Sweden)

Vodnar Dan C

2012-07-01

Full Text Available Abstract Background The consumer demands for better quality and safety of food products have given rise to the development and implementation of edible films. The use of antimicrobial films can be a promising tool for controlling L. monocytogenes on ready to eat products. The aim of this study was to develop effective antimicrobial films incorporating bioactive compounds from green and black teas into chitosan, for controlling L. monocytogenes ATCC 19115 on vacuum-packaged ham steak. The effectiveness of these antimicrobial films was evaluated at room temperature (20°C for 10 days and at refrigerated temperature (4°C for 8 weeks. Results The HPLC results clearly show that relative concentrations of catechins and caffeine in green tea ranked EGCG>EGC>CAF>ECG>EC>C while in black tea extracts ranked CAF>EGCG>ECG>EGC>EC>C. The chitosan-coated plastic films incorporating green tea and black tea extracts shows specific markers identified by FTIR. Incorporating natural extracts into chitosan showed that the growth of L monocytogenes ATCC 19115 was inhibited. The efficacy of antimicrobial effect of tea extracts incorporated into chitosan-coated plastic film was dose dependent. However, chitosan-coated films without addition of tea extracts did not inhibit the growth of L. monocytogenes ATCC 19115. Chitosan-coated plastic films incorporating 4% Green tea extract was the most effective antimicrobial, reducing the initial counts from 3.2 to 2.65 log CFU/cm2 during room temperature storage and from 3.2 to 1–1.5 log CFU/cm2 during refrigerated storage. Conclusions Incorporation of tea extracts into the chitosan-coated films considerably enhanced their effectiveness against L. monocytogenes ATCC 19115. 4% Green tea incorporated into chitosan-coated plastic film had a better antilisterial effect than 2% green tea or 2% and 4% black tea. Data from this study would provide new formulation options for developing antimicrobial packaging films using tea

Ohio dentists' awareness and incorporation of the dental home concept.

Science.gov (United States)

Hammersmith, Kimberly J; Siegal, Mark D; Casamassimo, Paul S; Amini, Homa

2013-06-01

The authors measured the awareness of the dental home concept among pediatric dentists (PDs) and general practice dentists (GPs) in Ohio and determined whether they included dental home characteristics for children 5 years and younger into their practices. The authors sent a pretested 20-question survey to all Ohio PDs and to a random sample of approximately 20 percent of GPs in Ohio. The authors designed the survey to elicit information about dental home awareness and the extent to which dental home characteristics were incorporated into dental practices. More than 90 percent of both GPs and PDs incorporated or intended to incorporate into their dental practices the specific dental home characteristics mentioned in 20 of 41 items related to dental home characteristics. Of the respondents who did not already incorporate dental home characteristics into their practices, however, most did not intend to do so. Less than 50 percent of respondents in both groups responded positively to some items in the culturally effective group, and GPs were less likely than were PDs to provide a range of behavior management services and to provide treatment for patients with complex medical and dental treatment needs. PDs were more likely than were GPs to accept Ohio Medicaid (64 versus 33 percent). PDs were more likely than were GPs (78 versus 18 percent) to be familiar with the term "dental home." More recent dental school graduates were more familiar with the term. Most Ohio PDs' and GPs' practices included characteristics found in the definition of dental home, despite a general lack of concept awareness on the part of GPs. Research is needed to provide an evidence base for the dental home. Practical Implications. Once an evidence base is developed for the important aspects of the dental home and the definition is revised, efforts should be made to incorporate these aspects more broadly into dental practice.

48 CFR 2852.102-270 - Incorporation in full text.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Incorporation in full text... 2852.102-270 Incorporation in full text. JAR provisions or clauses shall be incorporated in solicitations and contracts in full text. ...

Effect of tocopherols incorporation on physical properties of LDPE,PP and blend film of LDPE/PP

Directory of Open Access Journals (Sweden)

ZHU Xuntao

2014-12-01

Full Text Available The objectives of this study were to investigate the effects of added tocopherols and blending of different polymers on the film physical properties.Tocopherols (3 000 mg/kg were incorporate into low density polyethylene (LDPE,polypropylene (PP and a blend film of LDPE/PP (50/50 by extrusion process.Then films were evaluated to determine tocopherol recovery and physical properties.Results showed that extrusion did not significantly change film thermal properties (Tm,Tc and Tg as compared with synthetic polymer resin pellet (raw material.LDPE and PP did not seem to react with each other to form new polymers under the current extrusion conditions.Addition of tocopherol significantly changed film mechanical properties compared with control.The above results and other data seemed to support that polymer blending is a feasible approach for producing tocopherol containing packaging films.

40 CFR 76.4 - Incorporation by reference.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Incorporation by reference. 76.4 Section 76.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) ACID RAIN NITROGEN OXIDES EMISSION REDUCTION PROGRAM § 76.4 Incorporation by reference. (a) The...

Exploiting strain to enhance the Bi incorporation in GaAs-based III/V semiconductors using MOVPE

Science.gov (United States)

Nattermann, L.; Ludewig, P.; Sterzer, E.; Volz, K.

2017-07-01

Bi containing III/V semiconductors are frequently mentioned for their importance as part of the next generation of optoelectronic devices. Bi containing ternary and quaternary materials like Ga(AsBi), Ga(NAsBi) or Ga(PAsBi) are promising candidates to meet the requirements for new laser structures for telecommunications and solar cell applications. However, in previous studies it was determined that the incorporation of sufficient amounts of Bi still poses a challenge, especially when using MOVPE (metalorganic vapour phase epitaxy) as the growth technique. In order to figure out which mechanisms are responsible for the limitation of Bi incorporation, this work deals with the question of whether there is a relationship between strain, induced by the large Bi atoms, and the saturation level of Bi incorporation in Ga(AsBi). Ga(NAsBi) structures were grown by MOVPE at a low temperature, 400 °C, and compared to Ga(PAsBi) as well as Ga(AsBi) growth. By using the two group V atoms P and N, which have a smaller covalent radius than Bi, the effect of local strain compensation was investigated systematically. The comparison of Bi incorporation in the two quaternary materials systems proved the importance of local strain for the limitation of Bi incorporation, in addition to other effects, like Bi surface coverage and hydrocarbon groups at the growth surface. This, of course, also opens up ways to strain-state-engineer the Bi incorporation in semiconductor alloys.

Effect of titanium incorporation on the structural, mechanical and biocompatible properties of DLC thin films prepared by reactive-biased target ion beam deposition method

Energy Technology Data Exchange (ETDEWEB)

Bharathy, P. Vijai [Thin Films and Nanomaterials Lab, School of Physical Sciences, Bharathiar University, Coimbatore 641046 (India); Department of Mechanical Engineering, University of Saskatchewan, Saskatoon (Canada); Nataraj, D., E-mail: de.natraj@gmail.com [Thin Films and Nanomaterials Lab, School of Physical Sciences, Bharathiar University, Coimbatore 641046 (India); Chu, Paul K.; Wang, Huaiyu [Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon (Hong Kong); Yang, Q. [Department of Mechanical Engineering, University of Saskatchewan, Saskatoon (Canada); Kiran, M.S.R.N. [School of Physics, University of Hyderabad, Hyderabad, Andra Pradesh (India); Silvestre-Albero, J. [Laboratorio de Materiales Avanzados, Departmento de Quimica Inorganica, Universidad de Alicante, Ap 99, E-03080 Alicante (Spain); Mangalaraj, D. [Thin Films and Nanomaterials Lab, School of Physical Sciences, Bharathiar University, Coimbatore 641046 (India)

2010-10-15

Amorphous diamond like carbon (DLC) and titanium incorporated diamond like carbon (Ti-DLC) thin films were deposited by using reactive-biased target ion beam deposition method. The effects of Ti incorporation and target bias voltage on the microstructure and mechanical properties of the as-deposited films were investigated by means of X-ray photoelectron spectroscopy, Raman spectroscopy, transmission electron microscopy and nano-indentation. It was found that the Ti content in Ti-DLC films gets increased with increasing target bias voltage. At about 4.2 at.% of Ti, uniform sized well dispersed nanocrystals were seen in the DLC matrix. Using FFT analysis, a facility available in the TEM, it was found that the nanocrystals are in cubic TiC phase. Though at the core, the incorporated Ti atoms react with carbon to form cubic TiC; most of the surface exposed Ti atoms were found to react with the atmospheric oxygen to form weakly bonded Ti-O. The presence of TiC nanocrystals greatly modified the sp{sup 3}/sp{sup 2} hybridized bonding ratio and is reflected in mechanical hardness of Ti-DLC films. These films were then tested for their biocompatibility by an invitro cell culturing test. Morphological observation and the cell proliferation test have demonstrated that the human osteoblast cells well attach and proliferate on the surface of Ti incorporated DLC films, suggesting possible applications in bone related implant coatings.

48 CFR 1952.102-2 - Incorporation in full text.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Incorporation in full text... Clauses 1952.102-2 Incorporation in full text. All IAAR provisions and clauses shall be incorporated in solicitations and/or contracts in full text. ...

Physical and Antimicrobial Properties of Starch-PVA Blend Films as Affected by the Incorporation of Natural Antimicrobial Agents

Directory of Open Access Journals (Sweden)

Amalia Cano

2015-12-01

Full Text Available In this work, active films based on starch and PVA (S:PVA ratio of 2:1 were developed by incorporating neem (NO and oregano essential oils (OEO. First, a screening of the antifungal effectiveness of different natural extracts (echinacea, horsetail extract, liquid smoke and neem seed oil against two fungus (P. expansum and A. niger was carried out. The effect of NO and OEO incorporation on the films’ physical and antimicrobial properties was analyzed. Only composite films containing OEO exhibited antibacterial and antifungal activity. Antibacterial activity occurred at low OEO concentration (6.7%, while antifungal effect required higher doses of OEO in the films. Incorporation of oils did not notably affect the water sorption capacity and water vapor barrier properties of S-PVA films, but reduced their transparency and gloss, especially at the highest concentrations. The mechanical response of the S-PVA films was also negatively affected by oil incorporation but this was only relevant at the highest oil ratio (22%. S-PVA films with 6.7% of OEO exhibited the best physical properties, without significant differences with respect to the S-PVA matrix, while exhibiting antibacterial activity. Thus, the use of OEO as a natural antimicrobial incorporated into starch-PVA films represents a good and novel alternative in food packaging applications.

Physical and Antimicrobial Properties of Starch-PVA Blend Films as Affected by the Incorporation of Natural Antimicrobial Agents.

Science.gov (United States)

Cano, Amalia; Cháfer, Maite; Chiralt, Amparo; González-Martínez, Chelo

2015-12-26

In this work, active films based on starch and PVA (S:PVA ratio of 2:1) were developed by incorporating neem (NO) and oregano essential oils (OEO). First, a screening of the antifungal effectiveness of different natural extracts (echinacea, horsetail extract, liquid smoke and neem seed oil) against two fungus ( P. expansum and A. niger ) was carried out. The effect of NO and OEO incorporation on the films' physical and antimicrobial properties was analyzed. Only composite films containing OEO exhibited antibacterial and antifungal activity. Antibacterial activity occurred at low OEO concentration (6.7%), while antifungal effect required higher doses of OEO in the films. Incorporation of oils did not notably affect the water sorption capacity and water vapor barrier properties of S-PVA films, but reduced their transparency and gloss, especially at the highest concentrations. The mechanical response of the S-PVA films was also negatively affected by oil incorporation but this was only relevant at the highest oil ratio (22%). S-PVA films with 6.7% of OEO exhibited the best physical properties, without significant differences with respect to the S-PVA matrix, while exhibiting antibacterial activity. Thus, the use of OEO as a natural antimicrobial incorporated into starch-PVA films represents a good and novel alternative in food packaging applications.

22 CFR 212.13 - Incorporation by reference.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Incorporation by reference. 212.13 Section 212.13 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT PUBLIC INFORMATION Publication in the Federal Register § 212.13 Incorporation by reference. For purposes of this subpart B, USAID matters which...

Energetics of Mg incorporation at GaN(0001) and GaN(0001¯) surfaces

Science.gov (United States)

Sun, Qiang; Selloni, Annabella; Myers, T. H.; Doolittle, W. Alan

2006-04-01

By using density functional calculations in the generalized gradient approximation, we investigate the energetics of Mg adsorption and incorporation at GaN(0001) and GaN(0001¯) surfaces under various Ga and Mg coverage conditions as well as in presence of light or electron beam-induced electronic excitation. We find significant differences in Mg incorporation between Ga- and N-polar surfaces. Mg incorporation is easier at the Ga-polar surface, but high Mg coverages are found to cause important distortions which locally change the polarity from Ga to N polar. At the N-rich and moderately Ga-rich GaN(0001) surface, 0.25 ML of Mg substituting Ga in the top bilayer strongly reduce the surface diffusion barriers of Ga and N adatoms, in agreement with the surfactant effect observed in experiments. As the Mg coverage exceeds 0.5 ML, partial incorporation in the subsurface region (second bilayer) becomes favorable. A surface structure with 0.5 ML of incorporated Mg in the top bilayer and 0.25 ML in the second bilayer is found to be stable over a wide range of Ga chemical potential. At the Ga bilayer-terminated GaN(0001) surface, corresponding to Ga-rich conditions, configurations where Mg is incorporated in the interface region between the metallic Ga bilayer and the underlying GaN bilayer appear to be favored. At the N-polar surface, Mg is not incorporated under N-rich or moderately Ga-rich conditions, whereas incorporation in the adlayer may take place under Ga-rich conditions. In the presence of light or electron beam induced excitation, energy differences between Mg incorporated at the surface and in deeper layers are reduced so that the tendency toward surface segregation is also reduced.

Incorporation and distribution of dihomo-gamma-linolenic acid, arachidonic acid, and eicosapentaenoic acid in cultured human keratinocytes

International Nuclear Information System (INIS)

Punnonen, K.; Puustinen, T.; Jansen, C.T.

1986-01-01

Human keratinocytes in culture were labelled with 14 C-dihomo-gamma-linolenic acid, 14 C-arachidonic acid or 14 C-eicosapentaenoic acid. All three eicosanoid precursor fatty acids were effectively incorporated into the cells. In phospholipids most of the radioactivity was recovered, in neutral lipids a substantial amount, and as free unesterified fatty acids only a minor amount. Most of the radioactivity was found in phosphatidylethanolamine which was also the major phospholipid as measured by phosphorous assay. The incorporation of dihomo-gamma-linolenic acid and arachidonic acid into lipid subfractions was essentially similar. Eicosapentaenoic acid was, however, much less effectively incorporated into phosphatidylinositol + phosphatidylserine and, correspondingly, more effectively into triacylglycerols as compared to the two other precursor fatty acids. Once incorporated, the distribution of all three precursor fatty acids was relatively stable, and only minor amounts of fatty acids were released into the culture medium during short term culture (two days). Our study demonstrates that eicosanoid precursor fatty acids are avidly taken up by human keratinocytes and esterified into membrane lipids. The clinical implication of this finding is that dietary manipulations might be employed to cause changes in the fatty acid composition of keratinocytes

Incorporating the effects of socioeconomic uncertainty into priority setting for conservation investment.

Science.gov (United States)

McBride, Marissa F; Wilson, Kerrie A; Bode, Michael; Possingham, Hugh P

2007-12-01

Uncertainty in the implementation and outcomes of conservation actions that is not accounted for leaves conservation plans vulnerable to potential changes in future conditions. We used a decision-theoretic approach to investigate the effects of two types of investment uncertainty on the optimal allocation of global conservation resources for land acquisition in the Mediterranean Basin. We considered uncertainty about (1) whether investment will continue and (2) whether the acquired biodiversity assets are secure, which we termed transaction uncertainty and performance uncertainty, respectively. We also developed and tested the robustness of different rules of thumb for guiding the allocation of conservation resources when these sources of uncertainty exist. In the presence of uncertainty in future investment ability (transaction uncertainty), the optimal strategy was opportunistic, meaning the investment priority should be to act where uncertainty is highest while investment remains possible. When there was a probability that investments would fail (performance uncertainty), the optimal solution became a complex trade-off between the immediate biodiversity benefits of acting in a region and the perceived longevity of the investment. In general, regions were prioritized for investment when they had the greatest performance certainty, even if an alternative region was highly threatened or had higher biodiversity value. The improved performance of rules of thumb when accounting for uncertainty highlights the importance of explicitly incorporating sources of investment uncertainty and evaluating potential conservation investments in the context of their likely long-term success.

Differentiating leucine incorporation of

NARCIS (Netherlands)

Yokokawa, T.; Sintes, E.; de Corte, D.; Olbrich, K.; Herndl, G.J.

2012-01-01

The abundance (based on catalyzed reporter deposition-fluorescence in situ hybrid ization, CARD-FISH) and leucine incorporation rates of Archaea and Bacteria were determined throughout the water column in the eastern Atlantic. Bacteria dominated throughout the water column, although their

Dichtung als Blüte der Wahrheit Fiction as Blossom of Truth

Directory of Open Access Journals (Sweden)

Susanne Gramatzki

2006-03-01

Full Text Available Kaum eine andere Schriftstellerin hat so konsequent – man ist versucht, zu sagen: so ernsthaft – mit fremden Identitäten gespielt wie Else Lasker-Schüler, die sich selbst als Tino von Bagdad oder Prinz Jussuf von Theben imaginierte und ihren Freunden erfindungsreiche Namen beilegte. Realität und Phantasie flossen in ihrem Leben und Werk stets zusammen. Sigrid Bauschinger, ehemalige Professorin an der University of Massachusetts und bereits 1980 mit einer umfangreichen Studie über Else Lasker-Schüler hervorgetreten (Else Lasker-Schüler. Ihr Werk und ihre Zeit, hat es nun unternommen, auf Grundlage bisher unveröffentlicher Dokumente eine neue Biographie der bedeutenden Wuppertaler Autorin zu verfassen.Almost no other female author has played with foreign identities as consistently—one could almost say as seriously—as Else Lasker-Schüler, who fashioned herself as Tino von Baghdad or Prince Jussuf von Theben and affixed her friends with imaginative names. Reality and fantasy were intertwined in her life and work. Sigrid Bauschinger, formerly professor at the University of Massachusetts, already presented a comprehensive study of Else Lasker-Schüler in 1980 (Else Lasker-Schüler. Ihr Werk und ihre Zeit/Else Lasker-Schüler. Her Work and Her Time. She has now written a new biography of the Wuppertal author based on previously unpublished documents.

Effect of salseed-meal tannins on protein synthesis, /sup 35/S incorporation and cellulose digestibility by rumen microbes in vitro

Energy Technology Data Exchange (ETDEWEB)

Singh, K; Arora, S P [Haryana Agricultural Univ., Hissar (India)

1980-10-01

Tannins from seed-meal of sal (Shorea robusta Gaertn. F.) were fractionated after treatments into ethyl acetate (EA) and lead acetate (LA) fractions. In trial 1, incorporation of /sup 35/S from (NH/sub 4/)/sub 2//sup 35/SO/sub 4/ into microbial protein declined due to the effect of both 2% EA and LA fractions as compared to control. Microbial protein synthesis was depressed significantly (P < 0.01) in treatments containing 1.0 and 2.0% of EA fractions, and 0.5, 1.0 and 2.0% of LA fractions. The microbial cellulolytic activity also exhibited a similar trend in experiment 2. In experiment 3, in which all parameters were studied simultaneously, a significant depression was found in the values of microbial protein synthesis, /sup 35/S incorporation and cellulolysis at all levels of both the tannin fractions. It may be inferred that both the tannin fractions from salseed-meal showed antimicrobial activity and LA fraction seems to be more deleterious than EA fraction for rumen metabolism. The experiments were conducted in vitro using rumen liquor of a non-pregnant dry cow having permanent rumen fistula.

Carbon fiber polymer-matrix structural composites tailored for multifunctionality by filler incorporation

Science.gov (United States)

Han, Seungjin

This dissertation provides multifunctional carbon fiber polymer-matrix structural composites for vibration damping, thermal conduction and thermoelectricity. Specifically, (i) it has strengthened and stiffened carbon fiber polymer-matrix structural composites by the incorporation of halloysite nanotubes, carbon nanotubes and silicon carbide whiskers, (ii) it has improved mechanical energy dissipation using carbon fiber polymer-matrix structural composites with filler incorporation, (iii) it has increased the through-thickness thermal conductivity of carbon fiber polymer-matrix composite by curing pressure increase and filler incorporation, and (iv) it has enhanced the thermoelectric behavior of carbon fiber polymer-matrix structural composites. Low-cost natural halloysite nanotubes (0.1 microm diameter) were effective for strengthening and stiffening continuous fiber polymer-matrix composites, as shown for crossply carbon fiber (5 microm diameter, ˜59 vol.%) epoxy-matrix composites under flexure, giving 17% increase in strength, 11% increase in modulus and 21% decrease in ductility. They were less effective than expensive multiwalled carbon nanotubes (0.02 microm diameter), which gave 25% increase in strength, 11% increase in modulus and 14% decrease in ductility. However, they were more effective than expensive silicon carbide whiskers (1 microm diameter), which gave 15% increase in strength, 9% increase in modulus and 20% decrease in ductility. Each filler, at ˜2 vol.%, was incorporated in the composite at every interlaminar interface by fiber prepreg surface modification. The flexural strength increase due to halloysite nanotubes incorporation related to the interlaminar shear strength increase. The measured values of the composite modulus agreed roughly with the calculated values based on the Rule of Mixtures. Continuous carbon fiber composites with enhanced vibration damping under flexure are provided by incorporation of fillers between the laminae

Incorporating Cs and Sr into blast furnace slag inorganic polymers and their effect on matrix properties

Science.gov (United States)

Vandevenne, Niels; Iacobescu, Remus Ion; Pontikes, Yiannis; Carleer, Robert; Thijssen, Elsy; Gijbels, Katrijn; Schreurs, Sonja; Schroeyers, Wouter

2018-05-01

Minimizing harmful effects to the environment in waste-management practices requires continuous innovation. This is especially important in the field of radioactive waste management. Alternatives to the commonly used ordinary Portland cement matrices are being increasingly studied for improved immobilisation purposes. The development of inorganic polymers (IP) from industrial residues has been successfully studied for the immobilisation of caesium (Cs+) and strontium (Sr2+). However, knowledge of the effect of these introduced elements on the IP-matrix is scarce, especially considering that studied effects are dependent on the IP-precursor characteristics and the form in which the Cs+ and Sr2+ are introduced. In this study, IPs containing varying amounts of CsNO3 and Sr(NO3)2 were developed to study the effect of the introduced elements on the IP-characteristics. IP-samples were developed from ground granulated blast furnace slag (GGBFS) and 6 M NaOH activating solution. Cs+ and Sr2+ were added to account for 0.5, 1 and 2 wt% of the total IP-mass. Throughout the entire study, Cs+-addition showed no significant effects on the studied parameters. Calorimetric results showed that Sr2+ severely affects reaction kinetics, consuming hydroxide ions necessary for the alkali activation reaction. Sr2+-addition also caused a severe decrease in compressive strength, increased calcium leaching, and decreased sodium and hydroxide leaching. Micro-chemical analyses showed that Cs+ is almost fully incorporated in the formed IP-matrix, while Sr2+ mainly precipitates as Sr(OH)2 in concentrated regions throughout the IP-structure. The findings presented in this paper give insights on the effect of contaminant elements on the immobilising matrix.

Incorporation of flat glass in red ceramic

International Nuclear Information System (INIS)

Caldas, T.C.C.; Morais, A.S.C.; Pereira, P.S.; Monteiro, S.N.; Vieira, C.M.F.

2011-01-01

This work have as objective evaluate the effect of incorporation of up to 10% by weight of powdered flat glass , from civil industry, in red ceramic. The bodies were obtained by uniaxial pressing at 20 MPa and fired at temperatures of 850 ° C and 1050 ° C. The parameters studied were linear firing shrinkage, apparent density, water absorption and flexural rupture stress for the evaluation of the mechanical physical properties. The microstructure was observed by scanning electron microscopy and phase identification was performed by X-ray diffraction. The results showed that the waste changes the microstructure and properties of red ceramics. (author)

Incorporation effect of nanosized perovskite LaFe₀.₇Co₀.₃O₃ on the electrochemical activity of Pt nanoparticles-multi walled carbon nanotube composite toward methanol oxidation

Energy Technology Data Exchange (ETDEWEB)

Noroozifar, Meissam, E-mail: mnoroozifar@chem.usb.ac.ir [Department of Chemistry, University of Sistan and Baluchestan, PO Box 98155-147, Zahedan (Iran, Islamic Republic of); Khorasani-Motlagh, Mozhgan; Khaleghian-Moghadam, Roghayeh; Ekrami-Kakhki, Mehri-Saddat; Shahraki, Mohammad [Department of Chemistry, University of Sistan and Baluchestan, PO Box 98155-147, Zahedan (Iran, Islamic Republic of)

2013-05-01

Nanosized perovskite LaFe₀.₇Co₀.₃O₃ (LFCO) is synthesized through conventional co-precipitation method and characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) techniques. The incorporation effect of the mentioned perovskite to catalytic activity of the PtNPs-MWCNTs-nafion (or -chitosan) catalyst toward methanol oxidation has been studied by cyclic voltammetry. Based on the electrochemical studies, all MWCNTs-PtNPs-nafion (or chitosan) and MWCNTs-PtNPs-LFCO-nafion (or chitosan) catalysts show a considerable activity for methanol oxidation. However, a synergistic effect is observed when LFCO is added to the catalyst by decreasing the poisoning rate of the Pt catalyst. - Graphical abstract: Nanosized perovskite LaFe₀.₇Co₀.₃O₃ is synthesized and characterized. The incorporation effect of the mentioned perovskite to catalytic activity of the PtNPS-MWCNTs-nafion (or -chitosan) catalyst toward methanol oxidation is studied. Highlights: • Nanocrystalline LaFe₀.₇Co₀.₃O₃ (LFCO) is prepared by a new simple co-precipitation method. • Effect of LFCO to catalytic activity of PtNPS for methanol oxidation is studied. • A synergistic effect is observed when LFCO is added to the Pt catalyst. • Oxygen of LFCO could be considered as active oxygen to remove CO intermediates.

The effects of functional magnetic nanotubes with incorporated nerve growth factor in neuronal differentiation of PC12 cells

International Nuclear Information System (INIS)

Xie Jining; Chen Linfeng; Varadan, Vijay K; Yancey, Justin; Srivatsan, Malathi

2008-01-01

In this in vitro study the efficiency of magnetic nanotubes to bind with nerve growth factor (NGF) and the ability of NGF-incorporated magnetic nanotubes to release the bound NGF are investigated using rat pheochromocytoma cells (PC12 cells). It is found that functional magnetic nanotubes with NGF incorporation enabled the differentiation of PC12 cells into neurons exhibiting growth cones and neurite outgrowth. Microscope observations show that filopodia extending from neuron growth cones were in close proximity to the NGF-incorporated magnetic nanotubes, at times appearing to extend towards or into them. These results show that magnetic nanotubes can be used as a delivery vehicle for NGF and thus may be exploited in attempts to treat neurodegenerative disorders such as Parkinson's disease with neurotrophins. Further neurite outgrowth can be controlled by manipulating magnetic nanotubes with external magnetic fields, thus helping in directed regeneration

Concentration-Dependent Patterns of Leucine Incorporation by Coastal Picoplankton

Science.gov (United States)

Alonso, Cecilia; Pernthaler, Jakob

2006-01-01

Coastal pelagic environments are believed to feature concentration gradients of dissolved organic carbon at a microscale, and they are characterized by pronounced seasonal differences in substrate availability for the heterotrophic picoplankton. Microbial taxa that coexist in such habitats might thus differ in their ability to incorporate substrates at various concentrations. We investigated the incorporation patterns of leucine in four microbial lineages from the coastal North Sea at concentrations between 0.1 and 100 nM before and during a spring phytoplankton bloom. Community bulk incorporation rates and the fraction of leucine-incorporating cells in the different populations were analyzed. Significantly fewer bacterial cells incorporated the amino acid before (13 to 35%) than during (23 to 47%) the bloom at all but the highest concentration. The incorporation rate per active cell in the prebloom situation was constant above 0.1 nM added leucine, whereas it increased steeply with substrate concentration during the bloom. At both time points, a high proportion of members of the Roseobacter clade incorporated leucine at all concentrations (55 to 80% and 86 to 94%, respectively). In contrast, the fractions of leucine-incorporating cells increased substantially with substrate availability in bacteria from the SAR86 clade (8 to 31%) and from DE cluster 2 of the Flavobacteria-Sphingobacteria (14 to 33%). The incorporation patterns of marine Euryarchaeota were between these extremes (30 to 56% and 48 to 70%, respectively). Our results suggest that the contribution of microbial taxa to the turnover of particular substrates may be concentration dependent. This may help us to understand the specific niches of coexisting populations that appear to compete for the same resources. PMID:16517664

Incorporation of bacteriophages in polycaprolactone/collagen fibers for antibacterial hemostatic dual-function

DEFF Research Database (Denmark)

Cheng, Weilu; Zhang, Zhongyang; Xu, Ruodan

2018-01-01

Effective and affordable, antibacterial and hemostatic materials are of great interests in clinical wound care practices. Herein, Enterobacteria phage T4 were incorporated in polycaprolactone/collagen I (PCL-ColI) nanofibers via electrospinning in order to eradicate Escherichia coli infection and...

Effects of catecholamines on rat myocardial metabolism. II. Influence of catecholamines on 32p-incorporation into rat myocardial adenylic nucleotides and their turn-over.

Science.gov (United States)

Merouze, P; Gaudemer, Y; Gautheron, D

1975-01-01

1. The influence of catecholamines (adrenaline and noradrenaline) on 32Pi incorporation into intracellular phosphate and adenylic nucleotides has been studied on rat myocardium slices; consequently, the turn-over of nucleotides could be determined and compared under the influence of these two hormones. 2. In order to specify the site of action of these catecholamines, several inhibitors and activators of energetic metabolism were included in the incubation medium: 3'5'-AMP, caffein, ouabain, oligomycin, rotenone + antimycin. 3. Both catecholamines favour Pi exchanges between intra and extracellular spaces; ATP turn-over is greatly increased, while ADP turn-over is slightly decreased, and 32P-incorporation into ADP is increased. 4. 3'5'-AMP and caffein are without effect on Pi penetration; however, caffein increases catecholamine effects on this penetration. ATP turn-over is slightly increased by 3'5'-AMP or caffein. 5. Ouabain decreases ATP turn-over but does not prevent the adrenaline induced acceleration. Inhibitors of oxidative phosphorylation and electron transport decrease ATP-turn-over severely; this inhibition is not released by catecholamines. 6. It is concluded that the catecholamine effects observed are dependent on the oxidative phosphorylations process. The increase of Pi exchange by catecholamines may be related to the increase of extracellular space and cation translocations we observed with the hormones.

INCORPORATING GOOD LAND GOVERNANCE IN THE DISASTER REGION OF YOGYAKARTA

Directory of Open Access Journals (Sweden)

Sunarno Sunarno

2016-03-01

Full Text Available Land is one of the most major capitals in our life. Without it, sustainability of human existence is very impossible. Unfortunately, land problems in Indonesia have unique challenges compared to other countries. Many of kinds of challenges are in the form of the natural disasters. This paper is going to measure how well the principles of good governance has been incorporated in the Yogyakarta Special Region Land administration System generally by studying on the Merapi Disaster Mitigation, particularly in how  land planning for the Merapi Disaster’s victims is performed. The research methodology employs a combined research method, it means that fundamental principles in process and its output of both the doctrinal and non doctrinal approaches is synergized to based on the research’s activity unites. Configuration of  the land administration systems in achieving people prosperity has been affected by evolution of political, cultural, and legal awareness of local communities and central government policy. To conclude, incorporating a disaster response based land policy principles requires an integrated law and policy making system among parties through the implementation of good governance principle in the record of public participation voices and sustainable development interests. Notable reports illustrate that the good land governance incorporation encouraged and inspired land planning system to be more efficient and effective. Particularly in the natural disaster mitigation and reconstruction, incorporating good land governance principles furthermore encourages land policy makers to achieve the responsive land management in line with social demands and sustainable development programs.

Cation incorporation into zirconium oxide in LiOH, NaOH, and KOH solutions

International Nuclear Information System (INIS)

Jeong, Y.H.; Kim, K.H.; Baek, J.H.

1999-01-01

To investigate the cation incorporation into zirconium oxide, SIMS analysis was performed on the specimens prepared to have an equal oxide thickness in LiOH, NaOH, and KOH solutions. Even though they have an equal oxide thickness in LiOH, NaOH, and KOH solutions, the penetration depth of cation into the oxide decreased with an increase in the ionic radius of cation. The cation is considered to control the corrosion in alkali hydroxide solutions and its effect is dependent on the concentration of alkali and the oxide thickness. The slight enhancement of the corrosion rate at a low concentration is thought to be caused by cation incorporation into oxide, while the significant acceleration at a high concentration is due to the transformation of oxide microstructures that would be also induced by cation incorporation into oxide. (orig.)

Effect of azolla-incorporated diets on the growth and survival of Labeo fimbriatus during fry-to-fingerling rearing

Directory of Open Access Journals (Sweden)

B. Gangadhar

2015-12-01

Full Text Available An experiment of 75 days duration was conducted in fertilized outdoor circular cement tanks (1,000 L with soil base for evaluating the growth and survival of Labeo fimbriatus fry fed with pelleted feed containing varied levels of dried azolla (Azolla pinnata. The Control feed contained 45% groundnut oilcake plus 45% rice bran and 10% finger millet flour added as binder for pelleting. Dried azolla powder was incorporated into the feed at 10, 20, 30 and 40% levels, replacing the groundnut cake and rice bran proportionately. L. fimbriatus (mean length 2.42 cm fry were stocked in all the tanks at 30 m−3. The fish were fed 10% of body weight during the first month, followed by 7% during the second month and 5% during the last 15 days. Incorporation of azolla did not affect (p > 0.05 the water quality, growth and survival of fingerlings at harvest. Incorporation of azolla in the diet reduced the cost of feed (Rs. per 100 g biomass; Rs: Indian rupee, INR; 1 INR ≈ 0.015 EUR from 3.35 to 2.53, with a cost saving of 24.48%. The study indicated the possibility of incorporating azolla in diets of L. fimbriatus up to 40% during fry-to-fingerling rearing, resulting in savings on feed cost.

Effect of swelling behavior of organoclays in styrene on flammability of polystyrene nanocomposites obtained through in situ incorporation

International Nuclear Information System (INIS)

Timochenco, Licinia; Sayer, Claudia; Machado, Ricardo A.F.; Araujo, Pedro H.H.

2009-01-01

In this work the effect of the interaction between organoclays and styrene on the flammability of polystyrene/clay nanocomposites obtained through in-situ incorporation was investigated. The reactions were carried out in bulk polymerization. The interaction between organoclays and styrene was inferred by swelling of the organoclay in styrene. The nanocomposites were characterized by X-ray diffraction and Transmission Electron Microscopy. The heat release rate was obtained by Cone Calorimeter and the nanocomposites were tested through UL94 horizontal burn test. Thermogravimetric analysis were also performed. Results showed that intercalated and partially exfoliated nanocomposites were obtained depending on the swelling behavior of the organoclay in styrene. It was also observed an increase of the higher decomposition temperature and an accentuated decrease on the peak of heat release of the nanocomposites when comparing to the virgin polymer. No remarkable effect between the swelling behavior of the organoclay in styrene and the flammability properties was observed. (author)

Incorporating Context Effects into a Choice Model

NARCIS (Netherlands)

Rooderkerk, Robert P.; Van Heerde, Harald J.; Bijmolt, Tammo H. A.

The behavioral literature provides ample evidence that consumer preferences are partly driven by the context provided by the set of alternatives. Three important context effects are the compromise, attraction, and similarity effects. Because these context effects affect choices in a systematic and

Incorporating context effects into a choice model

NARCIS (Netherlands)

Bijmolt, T.H.A.; van Heerde, H.J.; Rooderkerk, R.P.

2011-01-01

The behavioral literature provides ample evidence that consumer preferences are partly driven by the context provided by the set of alternatives. three important context effects are the compromise, attraction, and similarity effects. because these context effects affect choices in a systematic and

The effect of incorporated self-lubricated BN(h) particles on the tribological properties of Ni–P/BN(h) composite coatings

Energy Technology Data Exchange (ETDEWEB)

Hsu, Chih-I., E-mail: s1322509@gmail.com [School of Defense Science, Chung Cheng Institute of Technology, National Defense University, Taoyuan, Taiwan (China); Hou, Kung-Hsu, E-mail: khou@ndu.edu.tw [Department of Power Vehicle and Systems Engineering, Chung Cheng Institute of Technology, National Defense University, Taoyuan, Taiwan (China); Ger, Ming-Der, E-mail: mingderger@gmail.com [Department of Chemistry and Material Engineering, Chung Cheng Institute of Technology, National Defense University, Taoyuan, Taiwan (China); Wang, Gao-Liang, E-mail: wanggl@takming.edu.tw [Department of Marketing Management, Takming University of Science and Technology, Taipei, Taiwan (China)

2015-12-01

Highlights: • The Ni-P-BN(h) coatings were prepared by electroless plating techniques in this research. • Surfactant CTAB resulting in a uniform dispersion of particles in Ni-P coating. • CTAB with a positive effect on the tribological performance of Ni–P/BN(h) coatings. • Frictional tests results show that optimal friction coefficient would be decreased 75%. • Wear resistance of the Ni-P/BN(h) coating is higher about 10 times Ni–P coatings. - Abstract: Ni–P/BN(h) composite coatings are prepared by means of the conventional electroless plating from the bath containing up to 10.0 g/l of hexagonal boron nitride particles with size 0.5 μm. The Ni–P coating is also prepared as a comparison. Cationic surfactant cetyltrimethylammonium bromide (CTAB) is used to stabilize the electrolyte, and the optimum CTAB concentration resulting in a nonagglomerated dispersion of particles is obtained using a dispersion stability analyzer. Morphology of the coatings and the effect of incorporated particles on coating structure and composition are investigated via scanning electron microscopy, field emission electron probe micro-analyzer and X-ray diffraction analysis. Hardness, roughness, friction coefficient and wear resistance of the coatings are also evaluated using Vickers microhardness tester, atomic force microscopy and ball-on disk machine. The presence of CTAB in the depositing bath has a positive effect on the surface roughness and performance of Ni–P/BN(h) composite coatings. The friction and wear tests results show that incorporation of 14.5 vol% BN(h) particles into the Ni–P coating lowers the coating friction coefficient by about 75% and the wear resistance of the Ni–P composites is approximately 10 times higher than Ni–P coating.

Rates of incorporation of radioactive molecules during the cell cycle

International Nuclear Information System (INIS)

Gray, J.W.; Pallavicini, M.G.; George, Y.S.; Groppi, V.; Look, M.; Dean, P.N.

1981-01-01

We report measurements of the incorporation of radioactive molecules during short labeling periods, as a function of cell-cycle stage, using a cell-sorter-based technique that does not require cell synchronization. We have determined: (1) tritiated thymidine ( 3 H-TdR) incorporation throughout S-phase in Lewis lung tumor cells in vitro both before and after treatment with cytosine arabinoside; (2) 3 H-TdR incorporation throughout S-phase in KHT tumor cells in vitro and in vivo; (3) 3 H-TdR incorporation throughout S-phase in Chinese hamster ovary cells and compared it with DNA synthesis throughout S-phase; (4) a mathematical expression describing 3 H-TdR incorporation throughout S-phase in Chinese hamster M3-1 cells; and (5) the simultaneous incorporation of 3 H-TdR and 35 S-methionine as they are related to cell size and DNA content in S49 mouse lymphoma cells. In asynchronously growing cells in vitro and in vivo, 3 H-TdR incorporation was generally low in early and late S-phase and highest in mid-S-phase. However, in Lewis lung tumor cells treated with cytosine arabinoside 3 H-TdR incorporation was highest in early and late S-phase and lowest in mid-S-phase. Incorporation of 35 S-methionine increased continuously with cell size and DNA content. Incorporation of 3 H-TdR in CHO cells was proportional to DNA synthesis

Effect of cassava starch-based edible coating incorporated with lemongrass essential oil on the quality of papaya MJ9

Science.gov (United States)

Praseptiangga, D.; Utami, R.; Khasanah, L. U.; Evirananda, I. P.; Kawiji

2017-02-01

Edible films and coatings have emerged as an alternative packaging in food applications and have received much attention due to their advantages. The incorporation of essential oils in film matrices to give antimicrobial properties had been observed recently, and could be used as promising preservation technology. In this study, cassava starch-based edible coating incorporated with lemongrass essential oil (1%) was applied by spraying and dipping methods to preserve papaya MJ9 during storage at room temperature. The quality of papaya MJ9 was analyzed based on its physicochemical and microbiological properties. The addition of lemongrass essential oil (1%) significantly inhibited the microbial growth on papaya MJ9 by reducing the value of total yeast and mold as compared to the control. This study also showed that for parameters of weight loss, total soluble solid, vitamin C, and total titratable acid, papaya MJ9 with cassava starch-based edible coating incorporated with lemongrass essential oil (1%) had the lower values than control, however, they had the higher value than control on firmness parameter. These results indicate that cassava starch-based edible coating incorporated with lemongrass essential oil (1%) can be used as an alternative preservation for papaya MJ9.

Incorporating Feminist Standpoint Theory

DEFF Research Database (Denmark)

Ahlström, Kristoffer

2005-01-01

As has been noted by Alvin Goldman, there are some very interesting similarities between his Veritistic Social Epistemology (VSE) and Sandra Harding’s Feminist Standpoint Theory (FST). In the present paper, it is argued that these similarities are so significant as to motivate an incorporation...

Adhesion of Candida albicans to Vanillin Incorporated Self-Curing Orthodontic PMMA Resin.

Science.gov (United States)

Zam, K.; Sawaengkit, P.; Thaweboon, S.; Thaweboon, B.

2018-02-01

It has been observed that there is an increase in Candida carriers during the treatment with orthodontic removable appliance. Vanillin is flavouring agent, which is known to have antioxidant and antimicrobial properties. The aim of this study was to evaluate the effect of vanillin incorporated PMMA on adhesion of Candida albicans. A total of 36 orthodontic self-curing PMMA resin samples were fabricated. The samples were divided into 3 groups depending on percentage of vanillin incorporated (0.1%, 0.5% and PMMA without vanillin as control). PMMA samples were coated with saliva. The adhesion assay was performed with C. albicans (ATCC 10231). The adherent yeast cells were stained with crystal violet and counted under microscope by random selection of 3 fields at 10X magnification. The statistical analyses performed by Kruskal Wallis and Mann Whitney non-parametric test. It was found that the PMMA resin samples with vanillin incorporation significantly reduced the adhesion of C. albicans as compared to the control group. This study indicates that vanillin incorporated resin can impede the adhesion of C. albicans to about 45 - 56 %. With further testing and development, vanillin can be employed as an antifungal agent to prevent adhesion of C. albicans to orthodontic self-curing PMMA resin.

Effect of incorporation of nitrogen atoms in Al2O3 gate dielectric of wide-bandgap-semiconductor MOSFET on gate leakage current and negative fixed charge

Science.gov (United States)

Kojima, Eiji; Chokawa, Kenta; Shirakawa, Hiroki; Araidai, Masaaki; Hosoi, Takuji; Watanabe, Heiji; Shiraishi, Kenji

2018-06-01

We performed first-principle calculations to investigate the effect of incorporation of N atoms into Al2O3 gate dielectrics. Our calculations show that the defect levels generated by VO in Al2O3 are the origin of the stress-induced gate leakage current and that VOVAl complexes in Al2O3 cause negative fixed charge. We revealed that the incorporation of N atoms into Al2O3 eliminates the VO defect levels, reducing the stress-induced gate leakage current. Moreover, this suppresses the formation of negatively charged VOVAl complexes. Therefore, AlON can reduce both stress-induced gate leakage current and negative fixed charge in wide-bandgap-semiconductor MOSFETs.

Reducing the Harmful Effects of Infrared Radiation on the Skin Using Bicosomes Incorporating β-Carotene.

Science.gov (United States)

Fernández, Estibalitz; Fajarí, Lluís; Rodríguez, Gelen; Cócera, Mercedes; Moner, Verónica; Barbosa-Barros, Lucyanna; Kamma-Lorger, Christina S; de la Maza, Alfonso; López, Olga

2016-01-01

In this work the effect of infrared (IR) radiation, at temperatures between 25 and 30°C, on the formation of free radicals (FRs) in the skin is studied. Additionally, the influence of IR radiation at high temperatures in the degradation of skin collagen is evaluated. In both experiments the protective effect against IR radiation of phospholipid nanostructures (bicosomes) incorporating β-carotene (Bcb) is also evaluated. The formation of FRs in skin under IR exposure was measured near physiological temperatures (25-30°C) using 5,5-dimethyl-1-pyrroline-N-oxide spin trap and electron paramagnetic resonance (EPR) spectroscopy. The study of the collagen structure was performed by small-angle X-ray scattering using synchrotron radiation. EPR results showed an increase in the hydroxyl radical in the irradiated skin compared to the native skin. The skin collagen was degraded by IR exposure at high temperatures of approximately 65°C. The treatment with Bcb reduced the formation of FRs and kept the structure of collagen. The formation of FRs by IR radiation does not depend on the increase of skin temperature. The decrease of FRs and the preservation of collagen fibers in the skin treated with Bcb indicate the potential of this lipid system to protect skin under IR exposure. © 2016 S. Karger AG, Basel.

Developing an institutional framework to incorporate ecosystem services into decision making-Proceedings of a workshop

Science.gov (United States)

Hogan, Dianna; Arthaud, Greg; Brookshire, David; Gunther, Tom; Pincetl, Stephanie; Shapiro, Carl; Van Horne, Bea

2011-01-01

The routine and effective incorporation of ecosystem services information into resource management decisions requires a careful consideration of the value of goods and services provided by natural systems. A multidisciplinary workshop was held in October 2008 on "Developing an Institutional Framework to Incorporate Ecosystem Services into Decision Making." This report summarizes that workshop, which focused on examining the relationship between an institutional framework and consideration of ecosystem services in resource management decision making.

Effects of low-dose irradiation of X-rays on IUdR incorporation into mouse tissues

International Nuclear Information System (INIS)

Misonoh, J.; Ishii, K.; Yoshida, M.; Okumura, Y.; Kodama, S.

1992-01-01

It is well known that biological responses get smaller when a radiation dose gets lower, and it makes it difficult to detect them with significant differences from background levels. Therefore we know little about biological effects arisen from very low-dose radiation in mammals and mammalian cells. Feinendegen et al. detected a significant reduction of 125 I-UdR uptake in bone marrow cells at doses below 0.01 Gy. Using this extremely sensitive biological response, they also indicated that cells of mice irradiated twice with an interval of 4 hours did not show any reaction after the second irradiation. This meant that cells became radio-resistant after whole-body irradiation with low-doses. This phenomenon, an acquired radio-resistance after low-dose irradiation, is explained as an adaptive response to radiation , which is recently well documented in cytogenic studies. In order to confirm that whether it is common in the cell renewal systems, IUdR incorporation into mouse spleen and the other tissues were studied after whole-body irradiation. (author). 7 refs., 1 fig., 2 tabs

The endozepine ODN stimulates [{sup 3}H]thymidine incorporation in cultured rat astrocytes

Energy Technology Data Exchange (ETDEWEB)

Gandolfo, P.; Patte, C.; Thoumas, J.L.; Leprince, J.; Vaudry, H.; Tonon, M.C. [European Institute for Peptide Research (IFRMP no. 23), Laboratory of Cellular and Molecular Neuroendocrinology, INSERM U 413, UA CNRS, University of Rouen, 76821 Mont-Saint-Aignan (France)

1999-05-15

High concentrations of diazepam-binding inhibitor (DBI) mRNA have been detected in astrocytoma, suggesting that DBI-derived peptides may play a role in glial cell proliferation. In the present study, we have investigated the effect of a processing product of DBI, the octadecaneuropeptide ODN, on DNA synthesis in cultured rat astrocytes. At very low concentrations (10{sup -14} to 10{sup -11} M), ODN caused a dose-dependent increase of [{sup 3}H]thymidine incorporation. At higher doses (10{sup -10} to 10{sup -5} M), the effect of ODN gradually declined. The central-type benzodiazepine receptor antagonist flumazenil (10{sup -6} M) completely suppressed the stimulatory action of ODN whereas the peripheral-type benzodiazepine receptor ligand, PK11195 (10{sup -6} M) had no effect. The ODN-induced stimulation of [{sup 3}H]thymidine incorporation was mimicked by methyl 6,7-dimethoxy-4-ethyl-{beta}-carboline-3-carboxylate (DMCM). The GABA{sub A} receptor antagonist bicuculline (10{sup -4} M) suppressed the effect of both ODN and DMCM on DNA synthesis. Exposure of cultured astrocytes to the specific GABA{sub A} agonist 3APS (10{sup -10} to 10{sup -4} M) also induced a dose-related increase of [{sup 3}H]thymidine incorporation. The present study indicates that ODN, acting through central-type benzodiazepine receptors associated with the GABA{sub A} receptor complex, stimulates DNA synthesis in rat glial cells. These data provide evidence for an autocrine role of endozepines in the control of glial cell proliferation. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

Incorporating climate change projections into riparian restoration planning and design

Science.gov (United States)

Perry, Laura G.; Reynolds, Lindsay V.; Beechie, Timothy J.; Collins, Mathias J.; Shafroth, Patrick B.

2015-01-01

Climate change and associated changes in streamflow may alter riparian habitats substantially in coming decades. Riparian restoration provides opportunities to respond proactively to projected climate change effects, increase riparian ecosystem resilience to climate change, and simultaneously address effects of both climate change and other human disturbances. However, climate change may alter which restoration methods are most effective and which restoration goals can be achieved. Incorporating climate change into riparian restoration planning and design is critical to long-term restoration of desired community composition and ecosystem services. In this review, we discuss and provide examples of how climate change might be incorporated into restoration planning at the key stages of assessing the project context, establishing restoration goals and design criteria, evaluating design alternatives, and monitoring restoration outcomes. Restoration planners have access to numerous tools to predict future climate, streamflow, and riparian ecology at restoration sites. Planners can use those predictions to assess which species or ecosystem services will be most vulnerable under future conditions, and which sites will be most suitable for restoration. To accommodate future climate and streamflow change, planners may need to adjust methods for planting, invasive species control, channel and floodplain reconstruction, and water management. Given the considerable uncertainty in future climate and streamflow projections, riparian ecological responses, and effects on restoration outcomes, planners will need to consider multiple potential future scenarios, implement a variety of restoration methods, design projects with flexibility to adjust to future conditions, and plan to respond adaptively to unexpected change.

Introduction to the special issue: 11. International Conference on Health Effects of Incorporated Radionuclides

International Nuclear Information System (INIS)

Ansoborlo, Eric; Menager, Marie-Therese; Abergel, Rebecca J.

2014-01-01

The 11. International Conference on Healths of Incorporated Radionuclides (HEIR 2013) took place in Berkeley (US) over four days in October 2013. It was co-organized by the Lawrence Berkeley National Laboratories (LBNL, US) and the Commissariat a l'Energie Atomique et aux Energies Alternatives (CEA, France). The HEIR 2013 was well attended and hosted about 90 scientists from 10 different countries. Forty oral presentations were given over the four days and 25 posters were discussed during two poster sessions. About a third of these contributions resulted in publications included in the present special issue, comprising most of the topics addressed at the meeting. Contributions and discussions spanned a variety of fields and were organized along the following four main scientific themes: 1) epidemiology, biological effects and dose assessment 2) bio-dosimetry, molecular biology and biochemistry 3) biokinetics 4) medical countermeasures and decorporation. Among the many important concepts and results treated during the conference, the following points can be highlighted: 1)the first reports on the effects of radiation and radionuclide contamination in Fukushima from the World Health Organization (WHO) and the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) allow assessing the current situation and health risks, three years after the power plant accident. Such events raise the significance of science-based findings to delineate the health risks for population exposed to radionuclides. 2)While most studies in the past decades have focused on the effects of acute or single exposure to radionuclides, few controlled studies have investigated the health impacts on chronic exposure to radioisotopes. Recent work on chronic cesium or uranium ingestion performed at the French Institute for Radioprotection and Nuclear Safety are reported. 3)The need for a good understanding of radionuclide speciation in biokinetic studies was emphasized and

Wax-incorporated emulsion gel beads of calcium pectinate for intragastric floating drug delivery.

Science.gov (United States)

Sriamornsak, Pornsak; Asavapichayont, Panida; Nunthanid, Jurairat; Luangtana-Anan, Manee; Limmatvapirat, Sontaya; Piriyaprasarth, Suchada

2008-01-01

The purpose of this study was to prepare wax-incorporated pectin-based emulsion gel beads using a modified emulsion-gelation method. The waxes in pectin-olive oil mixtures containing a model drug, metronidazole, were hot-melted, homogenized and then extruded into calcium chloride solution. The beads formed were separated, washed with distilled water and dried for 12 h. The influence of various types and amounts of wax on floating and drug release behavior of emulsion gel beads of calcium pectinate was investigated. The drug-loaded gel beads were found to float on simulated gastric fluid if the sufficient amount of oil was used. Incorporation of wax into the emulsion gel beads affected the drug release. Water-soluble wax (i.e. polyethylene glycol) increased the drug release while other water-insoluble waxes (i.e. glyceryl monostearate, stearyl alcohol, carnauba wax, spermaceti wax and white wax) significantly retarded the drug release. Different waxes had a slight effect on the drug release. However, the increased amount of incorporated wax in the formulations significantly sustained the drug release while the beads remained floating. The results suggest that wax-incorporated emulsion gel beads could be used as a carrier for intragastric floating drug delivery.

Spectroscopic studies of the size effects in the absorption spectra of (NH2(C2H5)2)2CuCl4 nanocrystals incorporated into the PMMA photopolymer matrix

International Nuclear Information System (INIS)

Kapustianyk, V.; Partyka, M.; Rudyk, V.; Piasecki, M.; Brik, M.G.; Tkaczyk, S.; Ozga, K.; Plucinski, K.; Romanyshyn, S.; Kityk, I.V.

2010-01-01

The absorption spectra of (NH 2 (C 2 H 5 ) 2 ) 2 CuCl 4 (DEACC) single crystals and nanocrystals (NC) incorporated into the polymethyl methacrylate (PMMA) polymer matrices were investigated both experimentally and theoretically. It was established that the crystal field spectra of Cu 2+ ion detect clearly the quantum size effects. The observed spectra were analyzed using first principle crystal field quantum chemical calculations. It was shown that incorporation of NCs into the polymer matrix allows to identify the charge-transfer (CT) bands in the spectra of DEACC crystals.

Nutrient digestibility of Mucuna (Mucuna pruriens var. utilis) bean in guinea fowl (Numida meleagris, L): Effects of heat treatment and levels of incorporation in diets.

Science.gov (United States)

Dahouda, M; Toléba, S S; Youssao, A K I; Hambuckers, A; Dangou-Sapoho, R; Martin, G B; Fillet, M; Hornick, J-L

2009-09-01

1. Mucuna pruriens var. utilis is a legume, the seeds of which are scarcely used in animal diets owing to their high content of 3,4-dihydroxy-L-phenylalanine (L-Dopa). 2. Experiments were conducted on guinea fowl to assess the effects of two types of heat processing (cooking and toasting) on chemical composition and nutrient digestibility of Mucuna seeds offered alone or incorporated at three concentrations (40, 120 or 200 g/kg) in complete diets. 3. Diets containing 200 g/kg seeds had more crude fibre and less ether extract. L-Dopa content increased with the amount of Mucuna inclusion. Cooking reduced markedly L-Dopa content while toasting had no effect. When fed alone, Mucuna seeds dramatically decreased feed intake. 4. Feed intake (FI) and body weight gain (BWG) were not influenced by the complete diets. Cooking significantly increased crude fibre digestibility. 5. It is suggested that cracked and cooked Mucuna bean can be incorporated at a safe level of 120 g/kg in complete diets for guinea fowl production.

[Effects of sub-micro emulsion composition on cellular disposition of incorporated lipophilic drug].

Science.gov (United States)

Sun, Xiao-Yi; Xiang, Zhi-Qiang; Wu, Shuo; Lv, Yuan-Yuan; Liang, Wen-Quan

2013-09-01

To investigate the effects of sub-micro emulsion composition on cellular uptake and disposition of incorporated lipophilic drug. Sub-micro emulsions containing 10 % oil, 1.2 % lecithin and 2.25 % glycerol were prepared, and the fluorescent agent coumarin 6 was used as a model drug. The effects of oil types, co-surfactants and cationic lipid on uptake and elimination kinetics of 6-coumarin in HeLa cells were studied. The uptake mechanism of sub-micro emulsions was further investigated. Oil type and Tweens had no influence on the cellular uptake. Modifications of surfactants with Span series increased the cellular influx, among which Span 20 with hydrophilic-lipophilic balance (HLB) value of 8.6 was the best enhancer. The intracellular drug level reached up to (46.09 ± 1.98)ng/μg protein which had significant difference with control group [(38.54 ± 0.34)ng/μg protein]. The positively charged emulsions significantly increased the uptake rate constant and elimination rate constant which were 4 times and 1.5 times of those in anionic groups, respectively. The uptake enhancement was also observed in cationic emulsions, cellular concentrations at plateau were (42.73 ± 0.84)ng/μg protein, which was about 3 times of that in anionic emulsions [(15.71 ± 0.74)ng/μg protein], when extracellular drug concentration kept at 100 ng/ml. Cationic emulsions delivered the payload mainly by direct drug transfer to contacted cells, while the negative ones depended on both drug passive diffusion and clathrin-mediated endocytosis of drug containing oil droplets which accounted for 20% of the intracellular drug. Interfacial characteristic of sub-micro emulsions such as co-surfactants HLB as well as zeta potentials can influence lipophilic drug both in cellular uptake and elimination.

Development and evaluation of garlic incorporated ready-to-eat extruded snacks.

Science.gov (United States)

Haritha, D; Vijayalakshmi, V; Gulla, S

2014-11-01

The present study was carried out to develop and evaluate ready to eat extruded snacks incorporated with garlic powder at various levels (5 %, 10 %, 15 %, 20 %). The organoleptic evaluation was conducted for the developed products and the well accepted products were selected for further studies like physical properties and shelf life (stored at room temperature for 2 months). The organoleptic evaluation of the developed snacks revealed that 15 % and 20 % garlic incorporated snacks were not acceptable due to strong garlic flavor, therefore T1 (control), T2 (5 % garlic) and T3 ( 10 % garlic) were selected for further studies. The physical properties showed significant changes with incorporation of garlic powder at 0 %-10 % level. There was an increase in mass flow rate, tap density and bulk density but decrease in the water holding capacity, oil absorption capacity and expansion ratio. The water soluble index and moisture retention of the products showed the same values for all the three selected treatments. The products were packed by ordinary, nitrogen and vacuum packing and stored for 2 months. It was found that there was an increase in moisture content and microbial load, however the increase was within limits. The increase in the moisture content was low in nitrogen packed products where as the microbial load decreased with increase in the percentage of garlic incorporation. The nitrogen and vacuum packed products showed less microbial load than the ordinary packed products. Garlic powder can be incorporated at 5 and 10 % levels in ready-to-eat extruded snacks with well acceptability and can be stored for a period of 2 months with nitrogen packing as an effective packaging.

In vitro evaluation of Spirulina platensis extract incorporated skin cream with its wound healing and antioxidant activities.

Science.gov (United States)

Gunes, Seda; Tamburaci, Sedef; Dalay, Meltem Conk; Deliloglu Gurhan, Ismet

2017-12-01

Algae have gained importance in cosmeceutical product development due to their beneficial effects on skin health and therapeutical value with bioactive compounds. Spirulina platensis Parachas (Phormidiaceae) is renowned as a potential source of high-value chemicals and recently used in skincare products. This study develops and evaluates skin creams incorporated with bioactive S. platensis extract. Spirulina platensis was cultivated, the aqueous crude extract was prepared and in vitro cytotoxicity of S. platensis extract in the range of 0.001-1% concentrations for 1, 3 and 7 d on HS2 keratinocyte cells was determined. Crude extracts were incorporated in skin cream formulation at 0.01% (w/w) concentration and in vitro wound healing and genotoxicity studies were performed. Immunohistochemical staining was performed to determine the collagen activity. 0.1% S. platensis extract exhibited higher proliferation activity compared with the control group with 198% of cell viability after 3 d. Skin cream including 1.125% S. platensis crude extract showed enhanced wound healing effect on HS2 keratinocyte cell line and the highest HS2 cell viability % was obtained with this concentration. The micronucleus (MN) assay results indicated that S. platensis extract incorporated creams had no genotoxic effect on human peripheral blood cells. Immunohistochemical analysis showed that collagen 1 immunoreactivity was improved by increased extract concentration and it was strongly positive in cells treated with 1.125% extract incorporated skin cream. The cell viability, wound healing activity and genotoxicity results showed that S. platensis incorporated skin cream could be of potential value in cosmeceutical and biomedical applications.

Effect of feeding levels on the milk yield and on the incorporation of 14C labelled Volatile Fatty Acids in rumen into the milk

International Nuclear Information System (INIS)

Yahara, Nobuo; Nishibe, Shinzo

1975-01-01

It has been known that milk production was influenced by the feeding schedule, such as hay vs silage and ratio or concentrate to roughage, which have an important effect upon the VFA (volatile fatty acid) production in the rumen. This experiment were conducted using acetate-1- 14 C, propionate-1- 14 C, and butylate-1- 14 C, to examine the effect of nutritional feeding levels on the milk yield and on the incorporation rate of ruminal VFA-1- 14 C into the milk components. The experiment using six Holstein cows, had two periods, with different levels of concentrate feeding. In the first period, the concentrate fed was a half of 4%-FCM and in the second period, its level was a half of the first one. As a roughage, corn silage and grass hay were fed. Following the reduced feeding level of the concentrate, nutrient intake, milk yield, milk component yield and the lactose percentage were all lowered, but the fat percentage was slightly increased and the casein percentage was constant while the incorporation rates of each ruminal VFA-1- 14 C into the milk components were also lowered, remarkably for the lactose. (auth.)

Effects of titanium incorporation on phase and electrochemical performance in LiFePO4 cathode material

International Nuclear Information System (INIS)

Wang Zhaohui; Pang Quanquan; Deng Kejian; Yuan Lixia; Huang Fei; Peng Yunlong; Huang Yunhui

2012-01-01

Highlights: ► Nominal LiFe 1−x Ti x PO 4 cathode materials were synthesized via solid-state reaction. ► A clear feature of Ti-doped LiFePO 4 has been clarified. ► The formation of impurity phases strongly depends on Ti doping level. ► Appropriate amount of Ti in LiFePO 4 can enhance the electrochemical performance. - Abstract: Ti-incorporated LiFe 1−x Ti x PO 4 (0 ≤ x ≤ 0.2) samples have been prepared via a two-step solid-state reaction route. The samples have systematically been investigated with X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, scanning electron microscope (SEM), transmission electron microscope (TEM), cyclic voltammetry (CV) and charge/discharge measurements. The incorporation of Ti in LiFePO 4 significantly enhances the electrochemical performance; the carbon-coated LiFe 0.9 Ti 0.1 PO 4 sample shows the best performance. It is confirmed that LiFe 1−x Ti x PO 4 with x ≤ 0.05 are of single phase while those with 0.07 ≤ x ≤ 0.2 contain impurity phases: LiTi 2 (PO 4 ) 3 and TiP 2 O 7 . The impurities influence not only the electronic conductivity, but also the total specific capacity. Appropriate amount of titanium incorporation is favorable for the improvement in electrochemical performance.

IDEA-system - a new computer based expert system for incorporation monitoring

International Nuclear Information System (INIS)

Doerfel, H.

2005-01-01

Full text: There is an increasing number of national and international recommendations and guidelines for incorporation monitoring (ICRP Publications, IAEA Safety Reports, ISO Standards, etc.). These recommendations cover different phases of incorporation monitoring and they provide general requirements for the measuring techniques, the monitoring procedures and for the procedures to evaluate intakes and doses from the monitoring results. There is, however, still a strong need for giving guidance to the dosimetrists on how to apply all the regulations properly. Thus, the EU project IDEAS was launched in order to provide general guidelines for the assessment of internal dose from incorporation monitoring data. These guidelines have recently been discussed in a virtual workshop on the internet (www.ideas-workshop.de) and they are being considered by ICRP for possible adoption in the near future. Recently, in the Karlsruhe Research Centre, a computer-based expert system has been developed for assisting dosimetrists in applying the relevant recommendations and guidelines for incorporation monitoring and internal dosimetry. The expert system gives guidance to the user with respect to: planning of monitoring (estimation of potential exposures, decision on the requirements of monitoring, definition of optimum measuring techniques and monitoring intervals); performing routine and special monitoring and evaluation of primary monitoring results. The evaluation of primary monitoring results is done according to the IDEAS guidelines in a threestage procedure according to the expected level of exposure (E = committed effective dose): standard evaluation with default or site specific parameter values (E 6 mSv). With these well-defined procedures the expert system follows the aim, that all recommendations and guidelines are applied properly and thus: internal exposures of more than 1 mSv are very likely to be detected in all situations; the results in terms of committed effective

Quantum-Mechanical Methods for Quantifying Incorporation of Contaminants in Proximal Minerals

Directory of Open Access Journals (Sweden)

Lindsay C. Shuller-Nickles

2014-07-01

Full Text Available Incorporation reactions play an important role in dictating immobilization and release pathways for chemical species in low-temperature geologic environments. Quantum-mechanical investigations of incorporation seek to characterize the stability and geometry of incorporated structures, as well as the thermodynamics and kinetics of the reactions themselves. For a thermodynamic treatment of incorporation reactions, a source of the incorporated ion and a sink for the released ion is necessary. These sources/sinks in a real geochemical system can be solids, but more commonly, they are charged aqueous species. In this contribution, we review the current methods for ab initio calculations of incorporation reactions, many of which do not consider incorporation from aqueous species. We detail a recently-developed approach for the calculation of incorporation reactions and expand on the part that is modeling the interaction of periodic solids with aqueous source and sink phases and present new research using this approach. To model these interactions, a systematic series of calculations must be done to transform periodic solid source and sink phases to aqueous-phase clusters. Examples of this process are provided for three case studies: (1 neptunyl incorporation into studtite and boltwoodite: for the layered boltwoodite, the incorporation energies are smaller (more favorable for reactions using environmentally relevant source and sink phases (i.e., ΔErxn(oxides > ΔErxn(silicates > ΔErxn(aqueous. Estimates of the solid-solution behavior of Np5+/P5+- and U6+/Si4+-boltwoodite and Np5+/Ca2+- and U6+/K+-boltwoodite solid solutions are used to predict the limit of Np-incorporation into boltwoodite (172 and 768 ppm at 300 °C, respectively; (2 uranyl and neptunyl incorporation into carbonates and sulfates: for both carbonates and sulfates, it was found that actinyl incorporation into a defect site is more favorable than incorporation into defect-free periodic

Numerical Simulation of Wave Propagation and Phase Transition of Tin under Shock-Wave Loading

International Nuclear Information System (INIS)

Hai-Feng, Song; Hai-Feng, Liu; Guang-Cai, Zhang; Yan-Hong, Zhao

2009-01-01

We undertake a numerical simulation of shock experiments on tin reported in the literature, by using a multiphase equation of state (MEOS) and a multiphase Steinberg Guinan (MSG) constitutive model for tin in the β, γ and liquid phases. In the MSG model, the Bauschinger effect is considered to better describe the unloading behavior. The phase diagram and Hugoniot of tin are calculated by MEOS, and they agree well with the experimental data. Combined with the MEOS and MSG models, hydrodynamic computer simulations are successful in reproducing the measured velocity profile of the shock wave experiment. Moreover, by analyzing the mass fraction contour as well as stress and temperature profiles of each phase for tin, we further discuss the complex behavior of tin under shock-wave loading. (condensed matter: structure, mechanical and thermal properties)

Investigation of mechanical behavior of copper in Nb3Sn superconducting composite wire

International Nuclear Information System (INIS)

Hojo, M.; Matsuoka, T.; Nakamura, M.; Tanaka, M.; Adachi, T.; Ochiai, S.; Miyashita, K.

2004-01-01

The mechanical properties and the thermal residual stress distribution of copper in Nb 3 Sn/Cu composite superconductor were investigated in detail. The stabilizer copper was removed from the composite wire, and the stress-strain behavior of this wire was compared with that of the original composite wire. The subtraction yielded the stress-strain curves of the copper when the Bauschinger effect was taken into account. The tensile test of the composites from which about 30% and 60% of copper was removed suggested the existence of the distribution of the thermal residual stress in the stabilizer copper. When this factor was taken into account, the analytical stress-strain curve agreed well with the experimental stress-strain curve. Thus, the stress-stain behavior of each component was fully understood

A climatological model for risk computations incorporating site- specific dry deposition influences

International Nuclear Information System (INIS)

Droppo, J.G. Jr.

1991-07-01

A gradient-flux dry deposition module was developed for use in a climatological atmospheric transport model, the Multimedia Environmental Pollutant Assessment System (MEPAS). The atmospheric pathway model computes long-term average contaminant air concentration and surface deposition patterns surrounding a potential release site incorporating location-specific dry deposition influences. Gradient-flux formulations are used to incorporate site and regional data in the dry deposition module for this atmospheric sector-average climatological model. Application of these formulations provide an effective means of accounting for local surface roughness in deposition computations. Linkage to a risk computation module resulted in a need for separate regional and specific surface deposition computations. 13 refs., 4 figs., 2 tabs

Simulating the Incorporation of Geochemical Proxies into Scleractinian Coral Skeletons: Effects of Different Environmental and Biological Factors and Implications for Paleo-reconstruction

Science.gov (United States)

Guo, W.

2017-12-01

Chemical and isotopic compositions of scleractinian coral skeletons reflect the physicochemical condition of the seawater in which corals grow. This makes coral skeleton one of the best archives of ocean climate and biogeochemical changes. A number of coral-based geochemical proxies have been developed and applied to reconstruct past seawater conditions, such as temperature, pH, carbonate chemistry and nutrient concentrations. Detailed laboratory and field-based studies of these proxies, however, indicate interpretation of the geochemistry of coral skeletons is not straightforward, due to the presence of `vital effects' and the variations of empirical proxy calibrations among and within different species. This poses challenges for the broad application of many geochemical proxies in corals, and highlights the need to better understand the fundamental processes governing the incorporation of different proxies. Here I present a numerical model that simulates the incorporation of a suite of geochemical proxies into coral skeletons, including δ11B, Mg/Ca, Sr/Ca, U/Ca, B/Ca and Ba/Ca. This model, building on previous theoretical studies of coral calcification, combines our current understanding of coral calcification mechanism with experimental constraints on the isotope and element partition during carbonate precipitation. It enables quantitative evaluation of the effects of different environmental and biological factors on each proxy. Specifically, this model shows that (1) the incorporation of every proxy is affected by multiple seawater parameters (e.g. temperature, pH, DIC) as opposed to one single parameter, and (2) biological factors, particularly the interplay between enzymatic alkalinity pumping and the exchange of coral calcifying fluid with external seawater, also exert significant controls. Based on these findings, I propose an inverse method for simultaneously reconstructing multiple seawater physicochemical parameters, and compare the performance of this

Dynamic material properties of refractory metals: tantalum and tantalum/tungsten alloys

International Nuclear Information System (INIS)

Furnish, M.D.; Lassila, D.H.; Chhabildas, L.C.; Steinberg, D.J.

1996-01-01

We have made a careful set of impact wave-profile measurements (16 profiles) on tantalum and tantalum-tungsten alloys at relatively low stresses (to 15 GPa). Alloys used were Ta 96.5 W 3.5 and Ta 86.5 W 13.5 (wt%) with oxygen contents of 30 endash 70 ppm. Information available from these experiments includes Hugoniot, elastic limits, loading rates, spall strength, unloading paths, reshock structure and specimen thickness effects. Hugoniot and spall properties are illustrated, and are consistent with expectations from earlier work. Modeling the tests with the Steinberg-Guinan-Lund rate-dependent material model provides for an excellent match of the shape of the plastic loading wave. The release wave is not well modeled due to the absence of the dynamic Bauschinger effect. There is also a discrepancy between experiments and calculations regarding the relative timing of the elastic and plastic waves that may be due to texture effects. copyright 1996 American Institute of Physics

Effect of epileptogenic agents on the incorporation of /sup 3/H-glycine into proteins in the cat's cerebral cortex

Energy Technology Data Exchange (ETDEWEB)

Rojik, I.; Feher, O.

1982-06-01

Filter paper strips soaked in /sup 3/H-glycine solution were applied to acoustic cortex of cats, anaesthetized with Nembutal and pretreated with epileptogenic agents (Metrazol, G-penicillin, and 3-amino-pyridine) and cycloheximide. The untreated contralateral hemisphere served as control. After 1 h incubation, both cortical samples were excised simultaneously and fixed in Bouin solution for autoradiography. Incorporation was blocked by cycloheximide. There was no glycine incorporation on the penicillin-treated side, while pyramidal cells were intensively labelled in layers II-V of the mirror focus. 3-Aminopyridine produced the same result. Metrazol as convulsant proved to be far weaker than the previous two. The intensity of incorporation was significantly more intensive in the mirror focus than in the primary one. Penicillin and 3-aminopyridine, while provoking cortical seizures, seem to inhibit glycine incorporation into a neuron-specific, function-dependent protein contained by the labelled cells in the autoradiogram.

Incorporation of fluconazole in copolymer PMMA-g-PEG derivatives; Incorporacao de fluconazol em ineditos derivados do copolimero PMMA-g-PEG

Energy Technology Data Exchange (ETDEWEB)

Silveira, B.M.; Santos, V.M.R. dos; Novack, K.M.; Lopes, S.A., E-mail: vmrebello@yahoo.com.br [Universidade Federal de Ouro Preto (UFOP), MG (Brazil)

2014-07-01

The graft copolymer PMMA-g-PEG went through chemical transformations in its chain through acetylation, halogenation, methylation and esterification followed by hydrolysis reactions. Subsequently, the copolymer PMMA-g-PEG derivatives passed through the process of emulsification and incorporation of the drug fluconazole. Derivatives copolymers were characterized by infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM) after incorporation in order to evaluate their effectiveness. The efficiency of incorporation was observed and it was also verified that the complexity of polymer chain influence in the incorporated fluconazole content. (author)

Phosphate incorporation in organic compounds in roots of maize

Energy Technology Data Exchange (ETDEWEB)

Michalik, I; Ivanko, S [Vysoka Skola Polnohospodarska, Nitra (Czechoslovakia)

1976-01-01

/sup 32/P incorporation and metabolism was investigated for short exposure times of 1 sec, 10 sec and 1, 10, 30 and 120 min. By stepwise extraction with a methanol-chloroform-formic acid-water mixture, various fractions of P compounds were obtained. Low-molecular acid-soluble P compounds were separated by one-dimensional paper chromatography. Of the total amount of /sup 32/P absorbed by the roots of maize in the form of phosphate ions during the short incubation time of 1 sec, more than 33% was incorporated into organic compounds. With increasing incubation time, the proportion of /sup 32/P in low-molecular organic compounds increased with the decreasing proportion of inorganic phosphorus. In the 1 sec, exposure incorporation was found in 3 low-molecular organic compounds only, namely ATP, ADP and diphosphoglyceric acid. The /sup 32/P incorporation into ATP and ADP, in contrast with incorporation into diphosphoglyceric acid, increased markedly with increased exposure time.

Phosphate incorporation in organic compounds in roots of maize

International Nuclear Information System (INIS)

Michalik, I.; Ivanko, S.

1976-01-01

32 P incorporation and metabolism was investigated for short exposure times of 1 sec, 10 sec and 1, 10, 30 and 120 min. By stepwise extraction with a methanol-chloroform-formic acid-water mixture, various fractions of P compounds were obtained. Low-molecular acid-soluble P compounds were separated by one-dimensional paper chromatography. Of the total amount of 32 P absorbed by the roots of maize in the form of phosphate ions during the short incubation time of 1 sec, more than 33% was incorporated into organic compounds. With increasing incubation time, the proportion of 32 P in low-molecular organic compounds increased with the decreasing proportion of inorganic phosphorus. In the 1 sec, exposure incorporation was found in 3 low-molecular organic compounds only, namely ATP, ADP and diphosphoglyceric acid. The 32 P incorporation into ATP and ADP, in contrast with incorporation into diphosphoglyceric acid, increased markedly with increased exposure time. (author)

Development of an API 5 L X 70 coil for the production of API pipes continuously welded by electric resistance; Desenvolvimento de bobina API 5 L X 70 para producao de tubos API soldados continuamente por resistencia eletrica

Energy Technology Data Exchange (ETDEWEB)

Lopes, Alexandre R; Cavalheiro, Benedito C [CONFAB Tubos S.A., Sao Caetano do Sul, SP (Brazil)

1998-07-01

The manufacturing of high strength ERW pipe, which applies the continuous forming process, is known to lead to a relevant economy in a productivity basis. The past few years shown a trend of changing on grade range, from the past X52 to the present X70. The manufacturing of the latter grades for coils are somehow difficult due to the high Bauschinger effect observed on ERW pipes with ferritic-perlitic microstructure, that results in pipes with yield strength much lower than in coils, as on limitations on rolling, where controlled rolling is not applied. In this work, acicular dispersed bainite was searched, in a way to reduce this effect after pipe forming. API 5L X70 coils, from USIMINAS, were processed including an intentional addition of Molybdenum in the range of 0.20%, together with Columbium and Vanadium (added as 0.050% average). (author)

A code reviewer assignment model incorporating the competence differences and participant preferences

Directory of Open Access Journals (Sweden)

Wang Yanqing

2016-03-01

Full Text Available A good assignment of code reviewers can effectively utilize the intellectual resources, assure code quality and improve programmers’ skills in software development. However, little research on reviewer assignment of code review has been found. In this study, a code reviewer assignment model is created based on participants’ preference to reviewing assignment. With a constraint of the smallest size of a review group, the model is optimized to maximize review outcomes and avoid the negative impact of “mutual admiration society”. This study shows that the reviewer assignment strategies incorporating either the reviewers’ preferences or the authors’ preferences get much improvement than a random assignment. The strategy incorporating authors’ preference makes higher improvement than that incorporating reviewers’ preference. However, when the reviewers’ and authors’ preference matrixes are merged, the improvement becomes moderate. The study indicates that the majority of the participants have a strong wish to work with reviewers and authors having highest competence. If we want to satisfy the preference of both reviewers and authors at the same time, the overall improvement of learning outcomes may be not the best.

Preparation and characterization of polyhedral oligomer silsesquioxane nanocomposites incorporated in epoxy resin

International Nuclear Information System (INIS)

Longhi, Marielen; Zini, Lucas Pandolphi; Birriel, Eliena Jonko; Kunst, Sandra Raquel; Zattera, Ademir Jose

2015-01-01

The incorporation of nanofiller in thermosetting like epoxy resin as has been studied in order to modify its properties. In this research, nanocomposites were obtained by incorporating 5% by weight of three polyhedral oligomeric silsesquioxane (POSS) with different number of functionalization: Glicidilisobutil-POSS, Triglicidilisobutil- POSS and Glicicil POSS in an epoxy matrix by sonification process. The nanocomposites were characterized by analysis of X-ray diffraction (DRX), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). The DRX analysis showed the characteristic peak of POSS and TEM images showed that there is a difference in the dispersion of nanocages for the difference in the number of epoxy groups on the POSS. The incorporation of Glicidilisobutil-POSS showed a significant increase in the glass transition temperature (Tg) value, and also that the most effective from the viewpoint of the dispersion, on the other hand, the Glycidyl-POSS had a greater influence on the thermal stability demonstrating that the dispersion medium is an important characteristic to define the most desirable properties. (author)

The comparison of antimicrobial packaging properties with different applications incorporation method of active material

Science.gov (United States)

Anwar, R. W.; Sugiarto; Warsiki, E.

2018-03-01

Contamination after the processing of products during storage, distribution and marketing is one of the main causes of food safety issues. Handling of food products after processing can be done during the packaging process. Antimicrobial (AM) active packaging is one of the concept of packaging product development by utilize the interaction between the product and the packaging environment that can delay the bacterial damage by killing or reducing bacterial growth. The active system is formed by incorporating an antimicrobial agent against a packaging matrix that will function as a carrier. Many incorporation methods have been developed in this packaging-making concept which were direct mixing, polishing, and encapsulation. The aims of this research were to examine the different of the AM packaging performances including its stability and effectiveness of its function that would be produced by three different methods. The stability of the packaging function was analyzed by looking at the diffusivity of the active ingredient to the matrix using SEM. The effectiveness was analyzed by the ability of the packaging to prevent the growing of the microbial. The results showed that different incorporation methods resulted on different characteristics of the AM packaging.

A Natural Antibacterial-Antioxidant Film from Soy Protein Isolate Incorporated with Cortex Phellodendron Extract

Directory of Open Access Journals (Sweden)

Shumin Liang

2018-01-01

Full Text Available An active film was prepared by incorporating cortex Phellodendron extract (CPE, an active agent into a soybean protein isolate (SPI. Different concentrations of CPE (0%, 10%, 12.5%, 15%, 17.5%, 20%, or 22.5%, w/w, based on SPI were mixed into the films characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, thermogravimetry, tensile tests, and barrier properties. The rheological properties of the solutions were also tested. The effects of the CPE content on the antibacterial and antioxidant activities of the films were examined. The results indicated that new hydrogen bonds formed between molecules in the films, and the crystallinity of the films decreased. The incorporation of CPE had no significant influence on the thermal stability of the films. Films containing 15% CPE had the maximum tensile strength of 6.00 MPa. The barrier properties against water vapor, oxygen, and light enhanced with the incorporation of CPE. The antioxidant activity of the SPI film was also improved. The films were effective against Staphylococcus aureus (S. aureus, Gram-positive bacteria. These results suggest that the SPI/CPE film can potentially extend the shelf lives of foods.

Incorporation of antibacterial agent derived deep eutectic solvent into an active dental composite.

Science.gov (United States)

Wang, Jing; Dong, Xiaoqing; Yu, Qingsong; Baker, Sheila N; Li, Hao; Larm, Nathaniel E; Baker, Gary A; Chen, Liang; Tan, Jingwen; Chen, Meng

2017-12-01

To incorporate an antibacterial agent derived deep eutectic solvent (DES) into a dental resin composite, and investigate the resulting mechanical properties and antibacterial effects. The DES was derived from benzalkonium chloride (BC) and acrylic acid (AA) and was incorporated into the dental resin composite through rapid mixing. A three-point bending test was employed to measure the flexural strength of the composite. An agar diffusion test was used to investigate antibacterial activity. Artificial (accelerated) aging was undertaken by immersing the composites in buffer solutions at an elevated temperature for up to 4 weeks. UV-vis spectrophotometry and NMR analysis were conducted to study BC release from the composite. Finally, the biocompatibility of the composite materials was evaluated using osteoblast cell culture for 7 days. Results were compared to those of a control composite which contained no BC. The DES-incorporated composite (DES-C) displayed higher flexural strength than a similar BC-incorporated composite BC (BC-C) for the same level of BC. The inclusion of BC conferred antibacterial activity to both BC-containing composites, although BC-C produced larger inhibition halos than DES-C at the same loading of BC. Control composites which contained no BC showed negligible antibacterial activity. After artificial aging, the DES-C composite showed better maintenance of the mechanical properties of the control compared with BC-C, although a decrease was observed during the three-point bending test, particularly upon storage at elevated temperatures. No BC release was detected in the aged solutions of DES-C, whereas the BC-C showed a linear increase in BC release with storage time. Significantly, cell viability results indicated that DES-C has better biocompatibility than BC-C. The incorporation of a BC-based DES into a dental resin composite provides a new strategy to develop antibacterial dental materials with better biocompatibility and longer effective

Defatted flaxseed meal incorporated corn-rice flour blend based extruded product by response surface methodology.

Science.gov (United States)

Ganorkar, Pravin M; Patel, Jhanvi M; Shah, Vrushti; Rangrej, Vihang V

2016-04-01

Considering the evidence of flaxseed and its defatted flaxseed meal (DFM) for human health benefits, response surface methodology (RSM) based on three level four factor central composite rotatable design (CCRD) was employed for the development of DFM incorporated corn - rice flour blend based extruded snack. The effect of DFM fortification (7.5-20 %), moisture content of feed (14-20 %, wb), extruder barrel temperature (115-135 °C) and screw speed (300-330 RPM) on expansion ratio (ER), breaking strength (BS), overall acceptability (OAA) score and water solubility index (WSI) of extrudates were investigated using central composite rotatable design (CCRD). Significant regression models explained the effect of considered variables on all responses. DFM incorporation level was found to be most significant independent variable affecting on extrudates characteristics followed by extruder barrel temperature and then screw rpm. Feed moisture content did not affect extrudates characteristics. As DFM level increased (7.5 % to 20 %), ER and OAA value decreased. However, BS and WSI values were found to increase with increase in DFM level. Based on the defined criteria for numerical optimization, the combination for the production of DFM incorporated extruded snack with desired sensory attributes was achieved by incorporating 10 % DFM (replacing rice flour in flour blend) and by keeping 20 % moisture content, 312 screw rpm and 125 °C barrel temperature.

Effect of length and location of edentulous area on the accuracy of prosthetic treatment plan incorporation into cone-beam computed tomography scans.

Science.gov (United States)

Jamjoom, Faris Z; Kim, Do-Gyoon; Lee, Damian J; McGlumphy, Edwin A; Yilmaz, Burak

2018-02-05

Effects of length and location of the edentulous area on the accuracy of prosthetic treatment plan incorporation into cone-beam computed tomography (CBCT) scans has not been investigated. To evaluate the effect of length and location of the edentulous area on the accuracy of prosthetic treatment plan incorporation into CBCT scans using different methods. Direct digital scans of a completely dentate master model with removable radiopaque teeth were made using an intraoral scanner, and digital scans of stone duplicates of the master model were made using a laboratory scanner. Specific teeth were removed to simulate different clinical situations and their CBCT scans were made. Surface scans were registered onto the CBCT scans. Radiographic templates for each clinical situation were also fabricated and used during CBCT scans of the master models. Using metrology software, three-dimensional (3D) deviation was measured on standard tesselation language (STL) files created from the CBCT scans against an STL file of the master model created from a CBCT scan. Statistical analysis was done using the MIXED procedure in a statistical software and Tukey HSD test (α =.05). The interaction between location and method was significant (P = .009). Location had no significant effect on registration methods (P > .05), but on the radiographic templates (P = .011). Length of the edentulous area did not have any significant effect (P > .05). Accuracy of digital image registration methods was similar and higher than that of radiographic templates in all clinical situations. Tooth-bound radiographic templates were significantly more accurate than the free-end templates. The results of this study suggest using image registration instead of radiographic templates when planning dental implants, particularly in free-end situations. © 2018 Wiley Periodicals, Inc.

Effects of incorporating germinated brown rice on the antioxidant properties of wheat flour chapatti.

Science.gov (United States)

Gujral, H Singh; Sharma, P; Bajaj, R; Solah, V

2012-02-01

Brown rice after germinating for 24 and 48 h was milled into flour and incorporated in whole wheat flour at a level of 10% to prepare chapattis. The objective was to use chapatti as a delivery vehicle for germinated brown rice. The flour blends and chapattis made from the flour blends were evaluated for their antioxidant properties. Incorporating germinated brown rice flour increased the total phenolic content of the flour blend from 1897 to 2144 µg FAE/g. The total flavonoids content increased significantly from 632.3 to1770.9 µg CAE/g and metal chelating activity significantly increased by 71.62%. Antioxidant activity increased significantly by the addition of brown rice flour and addition of 24- and 48-h germinated brown rice flour further increased the antioxidant activity significantly. The total phenolic content and total flavonoids content decrease significantly in all the blends after baking the flour into chapatti. A decrease of 3% to 29% was observed in the total phenolic content and a decrease of 25% to 42% was observed in the total flavonoids content. However, baking of the flour blends into chapatti increased the reducing power, metal chelating activity by three folds and antioxidant activity from 64% to 104%.

36 CFR 13.320 - Preference to Cook Inlet Region, Incorporated.

Science.gov (United States)

2010-07-01

... Region, Incorporated. 13.320 Section 13.320 Parks, Forests, and Public Property NATIONAL PARK SERVICE... to Cook Inlet Region, Incorporated. (a) The Cook Inlet Region, Incorporated (CIRI), in cooperation with village corporations within the Cook Inlet region when appropriate, will have a right of first...

Incorporation of DL-methionine /sup 3/H into the rat brain in the course of triethyl tin sulphate intoxication

Energy Technology Data Exchange (ETDEWEB)

Kozik, M B; Ozarzewska, E; Piechowski, A [Akademia Medyczna, Poznan (Poland)

1976-01-01

The incorporation of DL-methionine /sup 3/H into the rat brain in the course of acute edema caused by the triethyl tin sulphate (TET) was investigated by autoradiography. The results indicate that TET intoxication effects in lower incorporation of methionine into the experimental rat brain in comparison to that in normal animals. The changes in dynamics of DL-methionine /sup 3/H incorporation after TET intoxication are presented. The possible pathogenetic mechanism of the observed changes is discussed.

Incorporating Duration Information in Activity Recognition

Science.gov (United States)

Chaurasia, Priyanka; Scotney, Bryan; McClean, Sally; Zhang, Shuai; Nugent, Chris

Activity recognition has become a key issue in smart home environments. The problem involves learning high level activities from low level sensor data. Activity recognition can depend on several variables; one such variable is duration of engagement with sensorised items or duration of intervals between sensor activations that can provide useful information about personal behaviour. In this paper a probabilistic learning algorithm is proposed that incorporates episode, time and duration information to determine inhabitant identity and the activity being undertaken from low level sensor data. Our results verify that incorporating duration information consistently improves the accuracy.

Whey protein isolate edible films with essential oils incorporated to improve the microbial quality of poultry.

Science.gov (United States)

Fernández-Pan, Idoya; Mendoza, Mauricio; Maté, Juan I

2013-09-01

Whey protein isolate edible films with oregano or clove essential oils (EOs) incorporated as natural antimicrobials have been developed, with the aim of enhancing the microbial quality of poultry. The effectiveness of the films was determined against both the whole and selected microbiota developed during different periods of cold storage on the surface of skinless chicken breast. Tests were conducted by using both turbidimetric and agar disc diffusion methods. The antimicrobial edible films developed showed high effectiveness against the main spoilers developed on the surface of skinless chicken breasts cold-stored for 8 days. The films based on oregano EO showed greater effectiveness than those based on clove EO. Still, clove EO could be part of an effective antimicrobial edible film. Enterobacteriaceae was the most susceptible to the effect of the films when lower concentrations of EO were incorporated. The largest inhibition surfaces obtained were provoked by films with the highest concentration of oregano EO incorporated against lactic acid bacteria. The antimicrobial edible films developed in this study inhibited the growth of the microbial populations that developed through storage of the chicken breast and caused its spoilage. The results of this research have direct application in the food industry to enhance the control of the development of spoilers such as Pseudomonas spp. or lactic acid bacteria. © 2013 Society of Chemical Industry.

The feasibility of incorporating Vpx into lentiviral gene therapy vectors

Directory of Open Access Journals (Sweden)

Samantha A McAllery

2016-01-01

Full Text Available While current antiretroviral therapy has significantly improved, challenges still remain in life-long targeting of HIV-1 reservoirs. Lentiviral gene therapy has the potential to deliver protective genes into the HIV-1 reservoir. However, inefficient reverse transcription (RT occurs in HIV-1 reservoirs during lentiviral gene delivery. The viral protein Vpx is capable of increasing lentiviral RT by antagonizing the restriction factor SAMHD1. Incorporating Vpx into lentiviral vectors could substantially increase gene delivery into the HIV-1 reservoir. The feasibility of this Vpx approach was tested in resting cell models utilizing macrophages and dendritic cells. Our results showed Vpx exposure led to increased permissiveness of cells over a period that exceeded 2 weeks. Consequently, significant lower potency of HIV-1 antiretrovirals inhibiting RT and integration was observed. When Vpx was incorporated with anti-HIV-1 genes inhibiting either pre-RT or post-RT stages of the viral life-cycle, transduction levels significantly increased. However, a stronger antiviral effect was only observed with constructs that inhibit pre-RT stages of the viral life cycle. In conclusion this study demonstrates a way to overcome the major delivery obstacle of gene delivery into HIV-1 reservoir cell types. Importantly, incorporating Vpx with pre-RT anti-HIV-1 genes, demonstrated the greatest protection against HIV-1 infection.

Randomized Controlled Trial Examining the Effects of Fish Oil and Multivitamin Supplementation on the Incorporation of n-3 and n-6 Fatty Acids into Red Blood Cells

Directory of Open Access Journals (Sweden)

Andrew Pipingas

2014-05-01

Full Text Available The present randomized, placebo-controlled, double-blind, parallel-groups clinical trial examined the effects of fish oil and multivitamin supplementation on the incorporation of n-3 and n-6 fatty acids into red blood cells. Healthy adult humans (n = 160 were randomized to receive 6 g of fish oil, 6 g of fish oil plus a multivitamin, 3 g of fish oil plus a multivitamin or a placebo daily for 16 weeks. Treatment with 6 g of fish oil, with or without a daily multivitamin, led to higher eicosapentaenoic acid (EPA composition at endpoint. Docosahexaenoic acid (DHA composition was unchanged following treatment. The long chain LC n-3 PUFA index was only higher, compared to placebo, in the group receiving the combination of 6 g of fish oil and the multivitamin. Analysis by gender revealed that all treatments increased EPA incorporation in females while, in males, EPA was only significantly increased by the 6 g fish oil multivitamin combination. There was considerable individual variability in the red blood cell incorporation of EPA and DHA at endpoint. Gender contributed to a large proportion of this variability with females generally showing higher LC n-3 PUFA composition at endpoint. In conclusion, the incorporation of LC n-3 PUFA into red blood cells was influenced by dosage, the concurrent intake of vitamin/minerals and gender.

Development and characterization of bioactive edible films from spider crab (Maja crispata) chitosan incorporated with Spirulina extract.

Science.gov (United States)

Balti, Rafik; Mansour, Mohamed Ben; Sayari, Nadhem; Yacoubi, Lamia; Rabaoui, Lotfi; Brodu, Nicolas; Massé, Anthony

2017-12-01

Active food packaging films based on crab chitosan and Spirulina extract (SE) were developed. The effects of the SE incorporation at different levels on physical (color, opacity water vapor and oxygen permeability) and mechanical (tensile strength and elongation at break) properties of chitosan films were investigated. FTIR was carried out to observe the potential modifications of the chitosan films when incorporated with SE. The obtained results suggested that incorporation of SE into chitosan films improved mechanical and barrier properties. The antioxidant activity of the chitosan/SE films was characterized by means of three different analytical assays (DPPH, FRAP and FIC). Crab chitosan edible films containing SE showed higher antioxidant activity, regardless concentrations and methods assayed. Furthermore, the antioxidant activity occurred in a concentration-dependent manner. The agar disc diffusion method was used to determine the antibacterial activities of chitosan edible films against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Listeria monocytogenes, Salmonella typhimurium, Bacillus subtilis and Bacillus cereus. The chitosan/SE films were more effective (pchitosan edible films incorporated with SE showed great potential to be used for active food packaging due to its excellent antioxidant and antibacterial activities. Copyright © 2017 Elsevier B.V. All rights reserved.

An electricity generation planning model incorporating demand response

International Nuclear Information System (INIS)

Choi, Dong Gu; Thomas, Valerie M.

2012-01-01

Energy policies that aim to reduce carbon emissions and change the mix of electricity generation sources, such as carbon cap-and-trade systems and renewable electricity standards, can affect not only the source of electricity generation, but also the price of electricity and, consequently, demand. We develop an optimization model to determine the lowest cost investment and operation plan for the generating capacity of an electric power system. The model incorporates demand response to price change. In a case study for a U.S. state, we show the price, demand, and generation mix implications of a renewable electricity standard, and of a carbon cap-and-trade policy with and without initial free allocation of carbon allowances. This study shows that both the demand moderating effects and the generation mix changing effects of the policies can be the sources of carbon emissions reductions, and also shows that the share of the sources could differ with different policy designs. The case study provides different results when demand elasticity is excluded, underscoring the importance of incorporating demand response in the evaluation of electricity generation policies. - Highlights: ► We develop an electric power system optimization model including demand elasticity. ► Both renewable electricity and carbon cap-and-trade policies can moderate demand. ► Both policies affect the generation mix, price, and demand for electricity. ► Moderated demand can be a significant source of carbon emission reduction. ► For cap-and-trade policies, initial free allowances change outcomes significantly.

Incorporation of ciprofloxacin/laponite in polycaprolactone electrospun nanofibers: drug release and antibacterial studies

Science.gov (United States)

Kalwar, Kaleemullah; Zhang, Xuan; Aqeel Bhutto, Muhammad; Dali, Li; Shan, Dan

2017-12-01

Electrospun nanofibers with sustained drug release are a challenge but it can be improved by using hydrophobic polymer. Polycaprolactone (PCL) is a hydrophobic and biocompatible polymer. In this work, we have proposed a drug release mechanism by preparation of ciprofloxacin (Cip)/Laponite (LAP) complex and then incorporation in PCL nanofibers through electrospinning technique. In addition, drug incorporation was confirmed by FTIR and morphology of electrospun nanofibers was revealed by SEM. Drug loading was measured by using spectrophotometer. PCL/LAP/Cip NFs proved sustained drug release as compared to PCL NFs and PCL/Cip NFs. Furthermore, PCL/LAP/Cip NFs were used as antimicrobial agent and higher effect measured.

Effects of dietary incorporation of potato protein concentrate and supplementation of methionine on growth and feed utilization of rainbow trout

DEFF Research Database (Denmark)

Xie, S.; Jokumsen, Alfred

1998-01-01

and supplementation of methionine in the diet of rainbow trout. When the proportion of PPC exceeded 56 g kg-1 the growth of fish decreased while both growth and feed utilization decreased when the dietary PPC was 111 g kg-1. Protein productive value and condition factor of the fish decreased and mortality increased......Four diets (1, 2, 3 and 4) were formulated to contain different potato protein concentrate (PPC) levels (0, 22, 56, and 111 g kg-1). Diet 5 contained 56 g kg-1 PPC and 17 g kg-1 methionine. A growth trial was conducted to investigate the effect on growth and feed utilization of incorporation of PPC...

Controlled structure and properties of silicate nanoparticle networks for incorporation of biosystem components

International Nuclear Information System (INIS)

Sakai-Kato, Kumiko; Kawanishi, Toru; Hasegawa, Toshiaki; Takaoka, Akio; Kato, Masaru; Toyo'oka, Toshimasa; Utsunomiya-Tate, Naoko

2011-01-01

Inorganic nanoparticles are of technological interest in many fields. We created silicate nanoparticle hydrogels that effectively incorporated biomolecules that are unstable and involved in complicated reactions. The size of the silicate nanoparticles strongly affected both the physical characteristics of the resulting hydrogel and the activity of biomolecules incorporated within the hydrogel. We used high-resolution transmission electron microscopy (TEM) to analyze in detail the hydrogel network patterns formed by the silicate nanoparticles. We obtained clear nanostructured images of biomolecule-nanoparticle composite hydrogels. The TEM images also showed that larger silicate nanoparticles (22 nm) formed more loosely associated silicate networks than did smaller silicate nanoparticles (7 nm). The loosely associated networks formed from larger silicate nanoparticles might facilitate substrate diffusion through the network, thus promoting the observed increased activity of the entrapped biomolecules. This doubled the activity of the incorporated biosystems compared with that of biosystems prepared by our own previously reported method. We propose a reaction scheme to explain the formation of the silicate nanoparticle networks. The successful incorporation of biomolecules into the nanoparticle hydrogels, along with the high level of activity exhibited by the biomolecules required for complicated reaction within the gels, demonstrates the nanocomposites' potential for use in medical applications.

Incorporating seeds in activated carbon pellets limits herbicide effects to seeded bunchgrasses when controlling exotic annuals

Science.gov (United States)

Revegetation of exotic annual grass-invaded rangeland with pre-emergent herbicides is challenging because seeding is delayed until herbicide toxicity has diminished, but at this time, exotic annuals can be re-invading. Incorporating seeds into activated carbon pellets may allow seeding to occur at t...

Incorporation of therapeutically modified bacteria into gut microbiota inhibits obesity.

Science.gov (United States)

Chen, Zhongyi; Guo, Lilu; Zhang, Yongqin; Walzem, Rosemary L; Pendergast, Julie S; Printz, Richard L; Morris, Lindsey C; Matafonova, Elena; Stien, Xavier; Kang, Li; Coulon, Denis; McGuinness, Owen P; Niswender, Kevin D; Davies, Sean S

2014-08-01

Metabolic disorders, including obesity, diabetes, and cardiovascular disease, are widespread in Westernized nations. Gut microbiota composition is a contributing factor to the susceptibility of an individual to the development of these disorders; therefore, altering a person's microbiota may ameliorate disease. One potential microbiome-altering strategy is the incorporation of modified bacteria that express therapeutic factors into the gut microbiota. For example, N-acylphosphatidylethanolamines (NAPEs) are precursors to the N-acylethanolamide (NAE) family of lipids, which are synthesized in the small intestine in response to feeding and reduce food intake and obesity. Here, we demonstrated that administration of engineered NAPE-expressing E. coli Nissle 1917 bacteria in drinking water for 8 weeks reduced the levels of obesity in mice fed a high-fat diet. Mice that received modified bacteria had dramatically lower food intake, adiposity, insulin resistance, and hepatosteatosis compared with mice receiving standard water or control bacteria. The protective effects conferred by NAPE-expressing bacteria persisted for at least 4 weeks after their removal from the drinking water. Moreover, administration of NAPE-expressing bacteria to TallyHo mice, a polygenic mouse model of obesity, inhibited weight gain. Our results demonstrate that incorporation of appropriately modified bacteria into the gut microbiota has potential as an effective strategy to inhibit the development of metabolic disorders.

In silico investigation of the short QT syndrome, using human ventricle models incorporating electromechanical coupling

Directory of Open Access Journals (Sweden)

Ismail eAdeniran

2013-07-01

Full Text Available Introduction Genetic forms of the Short QT Syndrome (SQTS arise due to cardiac ion channel mutations leading to accelerated ventricular repolarisation, arrhythmias and sudden cardiac death. Results from experimental and simulation studies suggest that changes to refractoriness and tissue vulnerability produce a substrate favourable to re-entry. Potential electromechanical consequences of the SQTS are less well understood. The aim of this study was to utilize electromechanically coupled human ventricle models to explore electromechanical consequences of the SQTS. Methods and results: The Rice et al. mechanical model was coupled to the ten Tusscher et al. ventricular cell model. Previously validated K+ channel formulations for SQT variants 1 and 3 were incorporated. Functional effects of the SQTS mutations on transients, sarcomere length shortening and contractile force at the single cell level were evaluated with and without the consideration of stretch activated channel current (Isac. Without Isac, the SQTS mutations produced dramatic reductions in the amplitude of transients, sarcomere length shortening and contractile force. When Isac was incorporated, there was a considerable attenuation of the effects of SQTS-associated action potential shortening on Ca2+ transients, sarcomere shortening and contractile force. Single cell models were then incorporated into 3D human ventricular tissue models. The timing of maximum deformation was delayed in the SQTS setting compared to control. Conclusion: The incorporation of Isac appears to be an important consideration in modelling functional effects of SQT 1 and 3 mutations on cardiac electro-mechanical coupling. Whilst there is little evidence of profoundly impaired cardiac contractile function in SQTS patients, our 3D simulations correlate qualitatively with reported evidence for dissociation between ventricular repolarization and the end of mechanical systole.

Incorporation of Uranium into Hematite during Crystallization from Ferrihydrite

Science.gov (United States)

2014-01-01

Ferrihydrite was exposed to U(VI)-containing cement leachate (pH 10.5) and aged to induce crystallization of hematite. A combination of chemical extractions, TEM, and XAS techniques provided the first evidence that adsorbed U(VI) (≈3000 ppm) was incorporated into hematite during ferrihydrite aggregation and the early stages of crystallization, with continued uptake occurring during hematite ripening. Analysis of EXAFS and XANES data indicated that the U(VI) was incorporated into a distorted, octahedrally coordinated site replacing Fe(III). Fitting of the EXAFS showed the uranyl bonds lengthened from 1.81 to 1.87 Å, in contrast to previous studies that have suggested that the uranyl bond is lost altogether upon incorporation into hematite. The results of this study both provide a new mechanistic understanding of uranium incorporation into hematite and define the nature of the bonding environment of uranium within the mineral structure. Immobilization of U(VI) by incorporation into hematite has clear and important implications for limiting uranium migration in natural and engineered environments. PMID:24580024

Effect of alginate/carboxyl methyl cellulose composite coating incorporated with clove essential oil on the quality of silver carp fillet and Escherichia coli O157:H7 inhibition during refrigerated storage

OpenAIRE

Jalali, Nastaran; Ariiai, Peiman; Fattahi, Esmaeil

2015-01-01

The effects of alginate/carboxyl methylcellulose composite coating incorporated with clove essential oil on quality of silver carp fillet chilled storage (4 + 1 °C) were examined over a period of 16 days. The control samples (c), alginate/carboxyl methylcellulose coating (C-A), alginate/carboxyl methylcellulose composite coating incorporated with clove essential oil (with different concentration 1 and 1.5 %) (C-A + CEO1 % and C-A + CEO 15 % respectively) were analyzed by bacteriological (tota...

Microwave induced stimulation of 32Pi incorporation into phosphoinositides of rat brain synaptosomes

International Nuclear Information System (INIS)

Gandhi, C.R.; Ross, D.H.

1989-01-01

Exposure of synaptosomes to microwave radiation at a power density of 10 mW/sq cm or more produced stimulation of the 32 Pi-incorporation into phosphoinositides. The extent of 32 Pi incorporation was found to be much more pronounced in phosphatidylinositol-4-phosphate (PIP), and phosphatidylinositol-4,5-bisphosphate (PIP 2 ) as compared to phosphatidylinositol (PI) and phosphatidic acid (PA). Other lipids were also found to incorporate 32 Pi but no significant changes in their labeling were seen after exposure to microwave radiation. Inclusion of 10 mM lithium in the medium reduced the basal labeling of PIP 2 , PIP and PI and increased PA labeling. Li + also inhibited the microwave stimulated PIP 2 , PIP and PI labeling but had no effect on PA labeling. Calcium inophore, A 23187 , inhibited the basal and microwave stimulated 32 Pi labeling of PIP and PIP 2 , stimulated basal labeling of PA and PI and had no effect on microwave stimulated PA and PI labeling. Calcium chelator, EGTA, on the other hand, had no effect on basal labeling of PA and PI, stimulated basal PIP and PIP 2 labeling but did not alter microwave stimulated labeling of these lipids. Exposure of synaptosomes to microwave radiation did not alter the chemical concentration of phosphoinositides indicating that the turnover of these lipids was altered. These results suggest that low frequency microwave radiation alter the metabolism of inositol phospholipids by enhancing their turnover and thus may affect the transmembrane signalling in the nerve endings. (orig.)

Effect of feeding levels on the milk yield and on the incorporation of /sup 14/C labelled Volatile Fatty Acids in rumen into the milk

Energy Technology Data Exchange (ETDEWEB)

Yahara, N; Nishibe, S [Hokkaido National Agricultural Experiment Station, Sapporo (Japan)

1975-07-01

It has been known that milk production was influenced by the feeding schedule, such as hay vs silage and ratio or concentrate to roughage, which have an important effect upon the VFA (volatile fatty acid) production in the rumen. This experiment was conducted using acetate-1-/sup 14/C, propionate-1-/sup 14/C, and butylate-1-/sup 14/C, to examine the effect of nutritional feeding levels on the milk yield and on the incorporation rate of ruminal VFA-1-/sup 14/C into the milk components. The experiment using six Holstein cows, had two periods, with different levels of concentrate feeding. In the first period, the concentrate fed was a half of 4%-FCM and in the second period, its level was a half of the first one. As a roughage, corn silage and grass hay were fed. Following the reduced feeding level of the concentrate, nutrient intake, milk yield, milk component yield and the lactose percentage were all lowered, but the fat percentage was slightly increased and the casein percentage was constant while the incorporation rates of each ruminal VFA-1-/sup 14/C into the milk components were also lowered, remarkably for the lactose.

Genetic incorporation of recycled unnatural amino acids.

Science.gov (United States)

Ko, Wooseok; Kim, Sanggil; Jo, Kyubong; Lee, Hyun Soo

2016-02-01

The genetic incorporation of unnatural amino acids (UAAs) into proteins has been a useful tool for protein engineering. However, most UAAs are expensive, and the method requires a high concentration of UAAs, which has been a drawback of the technology, especially for large-scale applications. To address this problem, a method to recycle cultured UAAs was developed. The method is based on recycling a culture medium containing the UAA, in which some of essential nutrients were resupplemented after each culture cycle, and induction of protein expression was controlled with glucose. Under optimal conditions, five UAAs were recycled for up to seven rounds of expression without a decrease in expression level, cell density, or incorporation fidelity. This method can generally be applied to other UAAs; therefore, it is useful for reducing the cost of UAAs for genetic incorporation and helpful for expanding the use of the technology to industrial applications.

Incorporating microbiota data into epidemiologic models: examples from vaginal microbiota research.

Science.gov (United States)

van de Wijgert, Janneke H; Jespers, Vicky

2016-05-01

Next generation sequencing and quantitative polymerase chain reaction technologies are now widely available, and research incorporating these methods is growing exponentially. In the vaginal microbiota (VMB) field, most research to date has been descriptive. The purpose of this article is to provide an overview of different ways in which next generation sequencing and quantitative polymerase chain reaction data can be used to answer clinical epidemiologic research questions using examples from VMB research. We reviewed relevant methodological literature and VMB articles (published between 2008 and 2015) that incorporated these methodologies. VMB data have been analyzed using ecologic methods, methods that compare the presence or relative abundance of individual taxa or community compositions between different groups of women or sampling time points, and methods that first reduce the complexity of the data into a few variables followed by the incorporation of these variables into traditional biostatistical models. To make future VMB research more clinically relevant (such as studying associations between VMB compositions and clinical outcomes and the effects of interventions on the VMB), it is important that these methods are integrated with rigorous epidemiologic methods (such as appropriate study designs, sampling strategies, and adjustment for confounding). Crown Copyright © 2016. Published by Elsevier Inc. All rights reserved.

Shanghai Futures Exchange Incorporates Nickel & Tin to Finish Adjustment of Nonferrous Metal Index

Institute of Scientific and Technical Information of China (English)

2015-01-01

After close of trading on August 12,the nonferrous metal futures price index adjustment&optimization; work of Shanghai Futures Exchange was completed and formally took effect.The new compilation plan incorporated two newly marketed varieties of nickel and tin,and made adjustment and optimization in

Incorporating Twitter, Instagram, and Facebook in Economics Classrooms

Science.gov (United States)

Al-Bahrani, Abdullah; Patel, Darshak

2015-01-01

Social media is one of the most current and dynamic developments in education. In general, the field of economics has lagged behind other disciplines in incorporating technologies in the classroom. In this article, the authors provide a guide for economics educators on how to incorporate Twitter, Instagram, and Facebook inside and outside of the…

SPACE CHARGE SIMULATION METHODS INCORPORATED IN SOME MULTI - PARTICLE TRACKING CODES AND THEIR RESULTS COMPARISON

International Nuclear Information System (INIS)

BEEBE - WANG, J.; LUCCIO, A.U.; D IMPERIO, N.; MACHIDA, S.

2002-01-01

Space charge in high intensity beams is an important issue in accelerator physics. Due to the complicity of the problems, the most effective way of investigating its effect is by computer simulations. In the resent years, many space charge simulation methods have been developed and incorporated in various 2D or 3D multi-particle-tracking codes. It has becoming necessary to benchmark these methods against each other, and against experimental results. As a part of global effort, we present our initial comparison of the space charge methods incorporated in simulation codes ORBIT++, ORBIT and SIMPSONS. In this paper, the methods included in these codes are overviewed. The simulation results are presented and compared. Finally, from this study, the advantages and disadvantages of each method are discussed

SPACE CHARGE SIMULATION METHODS INCORPORATED IN SOME MULTI - PARTICLE TRACKING CODES AND THEIR RESULTS COMPARISON.

Energy Technology Data Exchange (ETDEWEB)

BEEBE - WANG,J.; LUCCIO,A.U.; D IMPERIO,N.; MACHIDA,S.

2002-06-03

Space charge in high intensity beams is an important issue in accelerator physics. Due to the complicity of the problems, the most effective way of investigating its effect is by computer simulations. In the resent years, many space charge simulation methods have been developed and incorporated in various 2D or 3D multi-particle-tracking codes. It has becoming necessary to benchmark these methods against each other, and against experimental results. As a part of global effort, we present our initial comparison of the space charge methods incorporated in simulation codes ORBIT++, ORBIT and SIMPSONS. In this paper, the methods included in these codes are overviewed. The simulation results are presented and compared. Finally, from this study, the advantages and disadvantages of each method are discussed.

Silver-incorporated composites of Fe2O3 carbon nanofibers as anodes for high-performance lithium batteries

Science.gov (United States)

Zou, Mingzhong; Li, Jiaxin; Wen, WeiWei; Chen, Luzhuo; Guan, Lunhui; Lai, Heng; Huang, Zhigao

2014-12-01

Composites of Ag-incorporated carbon nanofibers (CNFs) confined with Fe2O3 nanoparticles (Ag-Fe2O3/CNFs) have been synthesized through an electrospinning method and evaluated as anodes for lithium batteries (LIBs). The obtained Ag-Fe2O3/CNF anodes show good LIB performance with a capacity of 630 mAh g-1 tested at 800 mA g-1 after 150 cycles with almost no capacity loss and superb rate performance. The obtained properties for Ag-Fe2O3/CNF anodes are much better than Fe2O3/CNF anodes without Ag-incorporating. In addition, the low-temperature LIB performances for Ag-Fe2O3/CNF anodes have been investigated for revealing the enhanced mechanism of Ag-incorporating. The superior electrochemical performances of the Ag-Fe2O3/CNFs are associated with a synergistic effect of the CNF matrix and the highly conducting Ag incorporating. This unique configuration not only facilitates electron conduction especially at a relative temperature, but also maintains the structural integrity of active materials. Meanwhile, the related analysis of the AC impedance spectroscopy and the corresponding hypothesis for DC impedance confirm that such configuration can effectively enhance the charge-transfer efficiency and the lithium diffusion coefficient. Therefore, CNF-supported coupled with Ag incorporating synthesis supplied a promising route to obtain Fe2O3 based anodes with high-performance LIBs especially at low temperature.

Optimization of Emissions Sensor Networks Incorporating Tradeoffs Between Different Sensor Technologies

Science.gov (United States)

Nicholson, B.; Klise, K. A.; Laird, C. D.; Ravikumar, A. P.; Brandt, A. R.

2017-12-01

In order to comply with current and future methane emissions regulations, natural gas producers must develop emissions monitoring strategies for their facilities. In addition, regulators must develop air monitoring strategies over wide areas incorporating multiple facilities. However, in both of these cases, only a limited number of sensors can be deployed. With a wide variety of sensors to choose from in terms of cost, precision, accuracy, spatial coverage, location, orientation, and sampling frequency, it is difficult to design robust monitoring strategies for different scenarios while systematically considering the tradeoffs between different sensor technologies. In addition, the geography, weather, and other site specific conditions can have a large impact on the performance of a sensor network. In this work, we demonstrate methods for calculating optimal sensor networks. Our approach can incorporate tradeoffs between vastly different sensor technologies, optimize over typical wind conditions for a particular area, and consider different objectives such as time to detection or geographic coverage. We do this by pre-computing site specific scenarios and using them as input to a mixed-integer, stochastic programming problem that solves for a sensor network that maximizes the effectiveness of the detection program. Our methods and approach have been incorporated within an open source Python package called Chama with the goal of providing facility operators and regulators with tools for designing more effective and efficient monitoring systems. Sandia National Laboratories is a multi-mission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energys National Nuclear Security Administration under contract DE-NA0003525.

Cs and Ag co-incorporation in cubic silicon carbide

Science.gov (United States)

Londono-Hurtado, Alejandro; Heim, Andrew J.; Kim, Sungtae; Szlufarska, Izabela; Morgan, Dane

2013-08-01

finite size effects [25]. Based on finite size scaling studies of our largest charged cluster (CsC-OC-2VSi)4-, we estimate these effects lead to errors on the scale of 1.9 eV. Due to the fact that DFT formalism is unable to reproduce experimental band gaps in materials, underestimation of the band gap is expected. This can have an effect on the calculation of the charged defect formation energies. Therefore, the energetics and charge states of the defects must be treated as somewhat approximate. In this work, the value of the Fermi level is taken to be at the conduction band minimum, a choice that is consistent with an n-type material. This is justified by the fact that as-prepared SiC is generally n-type, with a low concentration of electron carriers [26-29]. It is also important to note that, even if SiC had an intrinsically lower Fermi level, under irradiation conditions long lived electronic excitations might provide effectively higher Fermi levels in the system. Irradiation induced defects such as vacancies and interstitials have been reported to lead to Fermi levels at the middle of the band gap [30,31]. For the case of negatively charged defects, having a Fermi level closer to the middle of the band gap will result in lower defect formation energies. This aspect is not critical for our study since our goal is not to calculate highly accurate formation energies or defect charge states but to compare these energies to identify qualitative trends of co-incorporate for the different defect clusters. Based on the above comments, results presented in this paper can be expected to have some quantitative inaccuracies but the conclusions drawn from these results are still of qualitative value. Furthermore, as will be shown in the result section, formation energy differences between competing energy clusters are above 1 eV for most cases. The main goals of this work are to identify whether Cs and Ag co-incorporation with O and I into SiC can lead to more stable defects than

Effects of 12-O-tetradecanoylphorbol-13-acetate on the incorporation of labelled precursors into RNA, DNA and protein in epidermis, dermis and subcutis from precancerous mouse skin with reference to enhanced tumorigenesis

International Nuclear Information System (INIS)

Bhisey, R.A.; Ramchandani, A.G.; Sirsat, S.M.

1984-01-01

The effects of a single application of 1.8 nmol 12-O-tetradecanoylphorbol-13-acetate (TPA) on precursor incorporation into RNA, DNA and protein in the epidermis, dermis and subcutis from 3-methylcholanthrene (MCA) injected precancerous mouse skin were studied at various time points between 3 and 96 h. In the precancerous tissues, the rates of incorporation of [ 3 H]uridine into RNA did not alter appreciably from those in the control tissues; while the rates of [ 3 H]methylthymidine incorporation into DNA were elevated with peaks appearing between 6 and 12 h, at 24 h and at 72 h in epidermis, dermis and subcutis. The rate of incorporation of [ 14 C]leucine into protein was markedly elevated in all the three tissues which showed 3-4 sharp peaks. The maximum stimulation ranged between 14 and 20 times that of the control. A single application of TPA to the precancerous mouse skin induced early stimulation of precursor incorporation into all the three macromolecules in epidermis, dermis and subcutis. The increased stimulation was maintained for 36-72 h. The patterns of incorporation of [ 3 H]methylthymidine into DNA gave rise to 2-3 peaks of elevated uptake in each tissue up to 36-48 h. A lowered rate of DNA synthesis between 48 and 60 h was followed by a peak at 72 h. In each group, epidermal mitotic activity correlated well with spurts of precursor incorporation into cellular DNA. The observations indicate that TPA recruits more cells into the DNA synthetic phase and accelerates selective growth of preneoplastic cells during tumor progression

Incorporating travel time reliability into the Highway Capacity Manual.

Science.gov (United States)

2014-01-01

This final report documents the activities performed during SHRP 2 Reliability Project L08: Incorporating Travel Time Reliability into the Highway Capacity Manual. It serves as a supplement to the proposed chapters for incorporating travel time relia...

Chemometrics applied to the incorporation of omega-3 in tilapia fillet feed flaxseed flour

Directory of Open Access Journals (Sweden)

Márcia Fernandes Nishiyama

2014-09-01

Full Text Available This study evaluated the effect of adding flaxseed flour to the diet of Nile tilapia on the fatty acid composition of fillets using chemometrics. A traditional and an experimental diet containing flaxseed flour were used to feed the fish for 60 days. An increase of 18:3 n-3 and 22:6 n-3 and a decrease of 18:2 n-6 were observed in the tilapia fillets fed the experimental diet. There was a reduction in the n-6:n-3 ratio. A period of 45 days of incorporation caused a significant change in tilapia chemical composition. Principal Component Analysis showed that the time periods of 45 and 60 days positively contributed to the total content of n-3, LNA, and DHA, highlighting the effect of omega-3 incorporation in the treatment containing flaxseed flour.

Indium-incorporation efficiency in semipolar (11-22) oriented InGaN-based light emitting diodes

Science.gov (United States)

Monavarian, Morteza; Metzner, Sebastian; Izyumskaya, Natalia; Okur, Serdal; Zhang, Fan; Can, Nuri; Das, Saikat; Avrutin, Vitaliy; Özgür, Ümit; Bertram, Frank; Christen, Jürgen; Morkoç, Hadis

2015-03-01

Reduced electric field in semipolar (1122) GaN/InGaN heterostructures makes this orientation attractive for high efficiency light emitting diodes. In this work, we investigated indium incorporation in semipolar (1122) GaN grown by metal-organic chemical vapor deposition on planar m-plane sapphire substrates. Indium content in the semipolar material was compared with that in polar c-plane samples grown under the same conditions simultaneously side by side on the same holder. The investigated samples incorporated dual GaN/InGaN/GaN double heterostructures with 3nm wide wells. In order to improve optical quality, both polar and semipolar templates were grown using an in-situ epitaxial lateral overgrowth (ELO) technique. Indium incorporation efficiency was derived from the comparison of PL spectra measured on the semipolar and polar structures at the highest excitation density, which allowed us to minimize the effect of quantum confined Stark effect on the emission wavelength. Our data suggests increased indium content in the semipolar material by up to 3.0%, from 15% In in c- GaN to 18% In in (1122) GaN.

Liposomes incorporating essential oil of Brazilian cherry (Eugenia uniflora L.): characterization of aqueous dispersions and lyophilized formulations.

Science.gov (United States)

Yoshida, P A; Yokota, D; Foglio, M A; Rodrigues, R A F; Pinho, S C

2010-01-01

Multilamellar liposomes incorporating essential oil of Brazilian cherry (Eugenia uniflora L.) leaves were produced by dry film hydration. Gas chromatography demonstrated the compounds found in the essential oil were effectively incorporated in the aqueous dispersions of liposomes. Differential scanning calorimetry analyses revealed the incorporation of the essential oil did not cause phase separation in the membrane structure; the gel-liquid crystalline transition temperature (main transition) remained the same despite the higher heterogeneity indicated by the transition peak broadening. Different cryoprotectors (sucrose and trehalose) were added to the liposomal formulations to be tested in their ability to protect the liposomal structure during the lyophilization. The morphological aspect of the lyophilized powders analysed by scanning electron microscopy showed significant differences among the samples with and without cryoprotectors. Fourier-transform infrared spectroscopy indicated the cryoprotectors interacted effectively with the polar heads of phospholipids in the bilayer. In terms of water absorption, trehalose was identified as a much more effective protector agent against it than sucrose. The cryoprotectors showed different degrees of effectiveness of preservation of the liposomal structure when the rehydration assays of lyophilized liposomes were carried out, as particle size measurements indicated a moderate process of fusion when the formulations with sucrose were rehydrated.

Physico-chemical and Biological Evaluation of Flavonols: Fisetin, Quercetin and Kaempferol Alone and Incorporated in beta Cyclodextrins.

Science.gov (United States)

Corina, Danciu; Bojin, Florina; Ambrus, Rita; Muntean, Delia; Soica, Codruta; Paunescu, Virgil; Cristea, Mirabela; Pinzaru, Iulia; Dehelean, Cristina

2017-01-01

Fisetin,quercetin and kaempferol are among the important representatives of flavonols, biological active phytocomounds, with low water solubility. To evaluate the antimicrobial effect, respectively the antiproliferative and pro apoptotic activity on the B164A5 murine melanoma cell line of pure flavonols and their beta cyclodextrins complexes. Incorporation of fisetin, quercetin and kaempferol in beta cyclodextrins was proved by scanning electron microscopy (SEM), differencial scanning calorimetry (DSC) and X-ray powder diffraction (XRPD). Pure compounds and their complexes were tested for antiproliferative (MTT) and pro-apoptotic activity (Annexin V-PI) on the B164A5 murine melanoma cell line and for the antimicrobial properties (Disk Diffusion Method) on the selected strains. The phytocompounds presented in a different manner in vitro chemopreventive activity against B164A5 murine melanoma cell line and weak antimicrobial effect. The three flavonols: fisetin, quercetin and kaempferol were successfully incorporated in beta-cyclodextrin (BCD) and hydroxylpropyl-beta-cyclodextrin (HPBCD). Incorporation in beta cyclodextrins had a mix effect on the biological activity conducing to decrease, increase or consistent effect compared to pure phytocompound, depending on the screened process and on the chosen combination. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Actions of exogenous histones and other proteins on [3H]-thymidine incorporation into DNA of Novikoff hepatoma cells

International Nuclear Information System (INIS)

Barra, R.; Beres, B.; Koch, M.R.; Lea, M.A.

1976-01-01

The effects of exogenous proteins on the incorporation of [ 3 H]-thymidine into DNA was studied in Novikoff hepatoma ascites cells incubated in Eagle's minimal essential medium. A liver cytosol fraction (8 mg protein/ml) caused approximately 80% inhibition of isotope incorporation. The inhibitory activity of cytosol fractions from Morris hepatomas 9618A 2 , 5123C and 20 were inversely related to their growth rate. Under conditions in which there appeared to be a density dependent inhibition of growth, a mean 10 to 20% stimulation of isotope incorporation was observed after addition of total calf thymus histones and individual fractions in the concentration range of 100 to 400μg/ml. In experiments with lower cell concentrations, a 60% or greater increase in [ 3 H]-thymidine incorporation could be obtained with total calf thymus histone and with Fl and arginine-rich histones from rat liver. At concentrations of 1 to 2 mg/ml, histones inhibited DNA synthesis. Bovine serum albumin had little effect on DNA synthesis. Polylysine caused an 80 to 90% inhibition at a concentration of 1 mg/ml, but stimulatory effects were detected under certain conditions at 10μg/ml. The results suggest critical dependence on the ratio of cell and exogenous protein concentration in the action of proteins on DNA synthesis. (author)

Synthesis and in vitro evaluation of novel isatin- incorporated ...

African Journals Online (AJOL)

incorporated thiadiazole hybrids as potential anti-breast ... Abstract. Purpose: To synthesis and characterize some novel isatin-incorporated ... Results: Compounds 3a, 3c, 3d, 3g and 3j showed anticancer activity in both MTT and SRB assay.

Np Incorporation into Uranyl Alteration Phases: A Quantum Mechanical Approach

International Nuclear Information System (INIS)

L.C. Huller; R.C. Win; U.Ecker

2006-01-01

Neptunium is a major contributor to the long-term radioactivity in a geologic repository for spent nuclear fuel (SNF) due to its long half-life (2.1 million years). The mobility of Np may be decreased by incorporation into the U 6+ phases that form during the corrosion of SNF. The ionic radii of Np (0.089nm) and U (0.087nm) are similar, as is their chemistry. Experimental studies have shown Np can be incorporated into uranyl phases at concentrations of ∼ 100 ppm. The low concentration of Np in the uranyl phases complicates experimental detection and presents a significant challenge for determining the incorporation mechanism. Therefore, we have used quantum mechanical calculations to investigate incorporation mechanisms and evaluate the energetics of Np substituting for U. CASTEP, a density functional theory based code that uses plane waves and pseudo-potentials, was used to calculate optimal H positions, relaxed geometry, and energy of different uranyl phases. The incorporation energy for Np in uranyl alteration phases was calculated for studtite, [(UO 2 )O 2 (H 2 O) 2 ](H 2 ) 2 , and boltwoodite, HK(UO 2 )(SiO 4 )* 1.5(H 2 O). Studtite is the rare case of a stable uranyl hydroxyl-peroxide mineral that forms in the presence of H 2 O 2 from the radiolysis of H 2 O. For studtite, two incorporation mechanisms were evaluated: (1) charge-balanced substitution of Np 5+ and H + for one U 6+ , and (2) direct substitution of Np 6+ for U 6+ . For boltwoodite, the H atomic positions prior to Np incorporation were determined, as well as the Np incorporation mechanisms and the corresponding substitution energies. The preferential incorporation of Np into different structure types of U 6+ minerals was also investigated. Quantum mechanical substitution energies have to be derived at Np concentrations higher than the ones found in experiments or expected in a repository. However, the quantum mechanical results are crucial for subsequent empirical force-field and Monte

Rigid Polyurethane Nanocomposites Prepared by Direct Incorporation: Effects of Nanoclay, Carbon Nanotubes and Mixing Speed on Physical and Morphological Properties

Science.gov (United States)

Ramadhoni, Benni; Ujianto, Onny; Nadapdap, Maxwell

2018-03-01

Rigid polyurethane (PU) nanocomposites were fabricated via solution mixing of PU, nanoclay and multiwalled carbon nanotubes (MWCNT) according to full factorial DoE. The nanoclay and MWCNT concentration as well as mixing speed were varied. The effects of controlled variables on reduced compressive strength, fire retardancy, hardness and morphological properties were analized. In general, the results showed that incorporation of nanofillers into PU matrix successfully elevated nanocomposites performance. The properties changed from -12% to 45% for reduced compressive strength, 9% to 30% for reduced fire retardancy and -32% to 101% for reduced hardness. The results suggested that the improvements were affected by nanoclay dispersion that acted as nucleating agent which resulted in smaller close cells of PU structures.

Assay for plasma somatomedin: (/sup 3/H)thymidine incorporation by isolated rabbit chondrocytes

Energy Technology Data Exchange (ETDEWEB)

Ashton, I K; Francis, M J.O. [Nuffield Orthopaedic Centre, Oxford (UK)

1977-01-01

The incorporation of (/sup 3/H)thymidine by rabbit chondrocytes in vitro has been developed as a sensitive assay for plasma somatomedin. A concentration of normal plasma of 2.5% enhanced (/sup 3/H)thymidine incorporation by 5- to 20-fold compared with basal levels in the absence of plasma. The mean potency of plasma from normal adult men was 0.96 +-0.1 u./ml (mean +- S.D.) and from acromegalic patients 1.9 +- 0.4 u./ml. The apparent potency of hypopituitary plasma alone increased on heating which suggested the presence of heat-labile inhibitors of somatomedin activity. The potency of heated hypopituitary plasma (0.6 +- 0.09 u./ml) remained significantly lower (P < 0.01) than normal plasma. Human growth hormone (0.1 to 20 ..mu..u/ml), bovine growth hormone (0.5 to 20 ..mu..u/ml), insulin (0.5 to 5 ..mu..u/ml) and glucose (0.3 to 2 mmol/l) had no direct effect on the incorporation of (/sup 3/H)thymidine. Chondrocytes which had been previously stored frozen also showed a response to plasma somatomedin.

Incorporation of casein phosphopeptide-amorphous calcium phosphate into a glass-ionomer cement.

Science.gov (United States)

Mazzaoui, S A; Burrow, M F; Tyas, M J; Dashper, S G; Eakins, D; Reynolds, E C

2003-11-01

Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) nanocomplexes have been shown to prevent demineralization and promote remineralization of enamel subsurface lesions in animal and in situ caries models. The aim of this study was to determine the effect of incorporating CPP-ACP into a self-cured glass-ionomer cement (GIC). Incorporation of 1.56% w/w CPP-ACP into the GIC significantly increased microtensile bond strength (33%) and compressive strength (23%) and significantly enhanced the release of calcium, phosphate, and fluoride ions at neutral and acidic pH. MALDI mass spectrometry also showed casein phosphopeptides from the CPP-ACP nanocomplexes to be released. The release of CPP-ACP and fluoride from the CPP-ACP-containing GIC was associated with enhanced protection of the adjacent dentin during acid challenge in vitro.

Soil carbon and soil physical properties response to incorporating mulched forest slash

Science.gov (United States)

Felipe G. Sanchez; Emily A. Carter; John. F. Klepac

2000-01-01

A study was installed in the Lower Coastal Plain near Washington, NC, to test the hypothesis that incorporating organic matter in the form of comminuted forest slash would increase soil carbon and nutrient pools, and alter soil physical properties to favor pine growth. Two sites were selected, an organic and a mineral site, to compare the treatment effects on...

Neutron radiation shielding properties of polymer incorporated self compacting concrete mixes.

Science.gov (United States)

Malkapur, Santhosh M; Divakar, L; Narasimhan, Mattur C; Karkera, Narayana B; Goverdhan, P; Sathian, V; Prasad, N K

2017-07-01

In this work, the neutron radiation shielding characteristics of a class of novel polymer-incorporated self-compacting concrete (PISCC) mixes are evaluated. Pulverized high density polyethylene (HDPE) material was used, at three different reference volumes, as a partial replacement to river sand in conventional concrete mixes. By such partial replacement of sand with polymer, additional hydrogen contents are incorporated in these concrete mixes and their effect on the neutron radiation shielding properties are studied. It has been observed from the initial set of experiments that there is a definite trend of reductions in the neutron flux and dose transmission factor values in these PISCC mixes vis-à-vis ordinary concrete mix. Also, the fact that quite similar enhanced shielding results are recorded even when reprocessed HDPE material is used in lieu of the virgin HDPE attracts further attention. Copyright © 2017 Elsevier Ltd. All rights reserved.

The effect of the incorporated organic materials available and the profit in the soil moisture, in the ICTA, la Alameda, Chimaltenango

International Nuclear Information System (INIS)

Corado Recinos, M.J. de

1999-01-01

This study was carried out during the period from June 1995 to November 1996 supported by the International Atomic Energy Agency (IAEA) jointly with the Direction General de Energia Nuclear (DGEN) through the Agricultural Section. The objectives consisted on evaluating the effect of the incorporation of the organic residues of Bean (Phascolus vulgaris L.), MUCUNA (STIZOLOBIUM PRURITUM L.), vicia (Vicia sativa L.) and the stubble of maiz (Zea mays L.) all these compared with a witness in the yield of corn grain of the variety Don Marshall, expressed in kg/ha; to determine the calibration curve of the moisture gauge CPN 503 for the soils of Tecp ; to determine the indexes of consumption of moisture (kc) of corn and lastly to determine the soil moisture contents during the corn cultivation cycle (rainy season) and the beginning of the dry period. The response variables were: Content surface moisture (%), yield grain of corn (kg/ha), real evapotranspiration (Etr). The different valued treatments were: Witness (TO), stubble corn (B), bean (C), Mucuna (D) and Vicia (E); set up in an experimental design of random blocks with 4 repetitions. The moisture contents were determined by means of the use of the moisture gauge, taking in consideration the obtained calibration curve for each stratum, with the purpose to transform the gravimetric humidity in volumetric humidity, being obtained the higher values for the stratum 0-20 cm where the corn stubble was incorporated (B) with 20.11% and for the stratum 20-40 cm the best treatment it was where the organic residual of Vicia was incorporated measuring values of moisture of 25.97%. With regard to the yield corn of the variety Don Marshall (kg/ha), the best treatment was where the residual of Vicia was incorporated with a yield 4,595.13 kg/ha. The pluvial precipitation (PP) and evapotranspiration (ETP) during the cultivation cycle was 1,014.1 mm and 708.14 mm respectively. The values of moisture consumption indexes gives (kc) for

Teaching Receptive Naming of Chinese Characters to Children with Autism by Incorporating Echolalia.

Science.gov (United States)

Leung, Jin-Pang; Wu, Kit-I

1997-01-01

The facilitative effect of incorporating echolalia on teaching receptive naming of Chinese characters to four Hong Kong children (ages 8-10) with autism was assessed. Results from two experiments indicated echolalia was the active component contributing to the successful acquisition and maintenance of receptive naming of Chinese characters.…

Developing an Analytical Framework: Incorporating Ecosystem Services into Decision Making - Proceedings of a Workshop

Science.gov (United States)

Hogan, Dianna; Arthaud, Greg; Pattison, Malka; Sayre, Roger G.; Shapiro, Carl

2010-01-01

The analytical framework for understanding ecosystem services in conservation, resource management, and development decisions is multidisciplinary, encompassing a combination of the natural and social sciences. This report summarizes a workshop on 'Developing an Analytical Framework: Incorporating Ecosystem Services into Decision Making,' which focused on the analytical process and on identifying research priorities for assessing ecosystem services, their production and use, their spatial and temporal characteristics, their relationship with natural systems, and their interdependencies. Attendees discussed research directions and solutions to key challenges in developing the analytical framework. The discussion was divided into two sessions: (1) the measurement framework: quantities and values, and (2) the spatial framework: mapping and spatial relationships. This workshop was the second of three preconference workshops associated with ACES 2008 (A Conference on Ecosystem Services): Using Science for Decision Making in Dynamic Systems. These three workshops were designed to explore the ACES 2008 theme on decision making and how the concept of ecosystem services can be more effectively incorporated into conservation, restoration, resource management, and development decisions. Preconference workshop 1, 'Developing a Vision: Incorporating Ecosystem Services into Decision Making,' was held on April 15, 2008, in Cambridge, MA. In preconference workshop 1, participants addressed what would have to happen to make ecosystem services be used more routinely and effectively in conservation, restoration, resource management, and development decisions, and they identified some key challenges in developing the analytical framework. Preconference workshop 3, 'Developing an Institutional Framework: Incorporating Ecosystem Services into Decision Making,' was held on October 30, 2008, in Albuquerque, NM; participants examined the relationship between the institutional framework and

Incorporating parametric uncertainty into population viability analysis models

Science.gov (United States)

McGowan, Conor P.; Runge, Michael C.; Larson, Michael A.

2011-01-01

Uncertainty in parameter estimates from sampling variation or expert judgment can introduce substantial uncertainty into ecological predictions based on those estimates. However, in standard population viability analyses, one of the most widely used tools for managing plant, fish and wildlife populations, parametric uncertainty is often ignored in or discarded from model projections. We present a method for explicitly incorporating this source of uncertainty into population models to fully account for risk in management and decision contexts. Our method involves a two-step simulation process where parametric uncertainty is incorporated into the replication loop of the model and temporal variance is incorporated into the loop for time steps in the model. Using the piping plover, a federally threatened shorebird in the USA and Canada, as an example, we compare abundance projections and extinction probabilities from simulations that exclude and include parametric uncertainty. Although final abundance was very low for all sets of simulations, estimated extinction risk was much greater for the simulation that incorporated parametric uncertainty in the replication loop. Decisions about species conservation (e.g., listing, delisting, and jeopardy) might differ greatly depending on the treatment of parametric uncertainty in population models.

7 CFR 801.12 - Design requirements incorporated by reference.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Design requirements incorporated by reference. 801.12 Section 801.12 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION... OFFICIAL PERFORMANCE REQUIREMENTS FOR GRAIN INSPECTION EQUIPMENT § 801.12 Design requirements incorporated...

Preferable adsorption of phosphate using lanthanum-incorporated porous zeolite: Characteristics and mechanism

Science.gov (United States)

He, Yinhai; Lin, Hai; Dong, Yingbo; Wang, Liang

2017-12-01

The adsorbent, where lanthanum oxide was incorporated onto porous zeolite (La-Z), of preferable adsorption towards phosphate was prepared by hydrothermal synthesis. Based on pH effect results, La-Z would effectively sequestrate phosphate over wider pH range of 3.0-7.0, alkaline conditions were unfavorable for phosphate. The adsorption of phosphate was not significantly influenced by ionic strength and by coexisting anions of chloride, nitrate and sulfate but bicarbonate showed slightly greater negative effects, indicating La-Z possessed highly selectivity to phosphate. Adsorption of phosphate could be well fitted by pseudo-second-order model and the process was mainly controlled by intra-particle diffusion. Equilibrium adsorption demonstrated that Langmuir model was more suitable than Freundlich model for description phosphate adsorption and the adsorption capacity was 17.2 mg P g-1, which exhibited 95% utilization of incorporated La. Over 95% phosphate was eliminated in real effluent treatment when the dose was 2 g L-1. The underlying mechanism for phosphate capture was probed with Zeta potential and X-ray photoelectron spectroscope analysis, and the formation of La-P inner-sphere complexation was testified to be the dominant pathway. All the results suggested that the porous zeolite-supported lanthanum oxide can serve as a promising adsorbent for phosphate removal in realistic application.

Antimicrobial effectiveness of oregano and sage essential oils incorporated into whey protein films or cellulose-based filter paper.

Science.gov (United States)

Royo, Maite; Fernández-Pan, Idoya; Maté, Juan I

2010-07-01

In this study the antimicrobial effectiveness of oregano and sage essential oils (EOs) incorporated into two different matrices, whey protein isolate (WPI) and cellulose-based filter paper, was analysed. Antimicrobial properties of WPI-based films containing oregano and sage EOs were tested against Listeria innocua, Staphylococcus aureus and Salmonella enteritidis. Oregano EO showed antimicrobial activity against all three micro-organisms. The highest inhibition zones were against L. innocua. However, sage EO did not show antimicrobial activity against any of the micro-organisms. Antimicrobial activity was confirmed for both EOs using cellulose-based filter paper as supporting matrix, although it was significantly more intense for oregano EO. Inhibition surfaces were significantly greater when compared with those of the WPI films. This finding is likely due to the higher porosity and diffusivity of the active compounds in the filter paper. The interactions between the EOs and the films have a critical effect on the diffusivity of the active compounds and therefore on the final antimicrobial activity. As a result, to obtain active edible films, it is necessary to find the equilibrium point between the nature and concentration of the active compounds in the EO and the formulation of the film.

Therapy for incorporated radionuclides: scope and need

International Nuclear Information System (INIS)

Smith, V.H.

1981-03-01

In the United States the recent termination of funding for research on therapy for incorporated radionuclides has virtually halted progress on improved or new agents and procedures for removing radioactivity from the body. Research was eliminated, but is still needed on new removal agents, improved delivery system, in vitro test systems, and the toxicology of treatments. For many radionuclides, no adequate therapy exists. The relationship between radionuclide removal and reduction in cancer risk is still unanswered. Without proper research support, needed improvements in the treatment for incorporated radionuclides in the US are uncertain

Production of sludge-incorporated paver blocks for efficient waste management.

Science.gov (United States)

Velumani, P; Senthilkumar, S

2018-06-01

Waste management plays a vital role in the reuse of industry wastes in to useful conversions. The treatment of effluents from the combined textile effluent treatment plant and hypo sludge from the paper industry results in sludge generation, which poses a huge challenge for its disposal. Therefore, an eco-friendly attempt is made to utilize them in the production of paver blocks. Paver blocks are construction units that have vast applications in street roads, walking paths, fuel stations, and so on. In this study, an innovative attempt has been made to manufacture paver blocks incorporating textile effluent treatment plant sludge and hypo sludge, to utilize them in suitable proportions. The effect of adding silica fume and polypropylene fibre in paver blocks has also been studied. Paver blocks containing sludge with different proportions were cast based on the recommendations in Indian Standards (IS) 15658, and the test results were compared with the nominal M20 grade and M30 grade paver blocks. The outcomes of the paver block combinations were studied and found to be an effective utilization of sludge with substantial cement replacement of up to 35%, resulting in effective waste management for specific industries. Presently, paver blocks are construction units that have vast application in street roads and other constructions like walking paths, fuel stations, and so on. Also, paver blocks possess easy maintenance during breakages. Based on this application, an innovative attempt has been made to manufacture paver blocks incorporating textile effluent treatment plant sludge and hypo sludge to utilize them in suitable proportions.

75 FR 17737 - Industrial Economics, Incorporated; Transfer of Data

Science.gov (United States)

2010-04-07

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPP-2010-0194; FRL-8820-2] Industrial Economics... (CBI) by the submitter, will be transferred to Industrial Economics, Incorporated in accordance with 40 CFR 2.307(h)(3) and 2.308(i)(2). Industrial Economics, Incorporated has been awarded multiple...

Antimicrobial Property of Hydrocolloid Impression Material Incorporated with Silver Nanoparticles Against Staphylococcus Aureus

Directory of Open Access Journals (Sweden)

Wangchuk Norbu Penden

2017-01-01

Full Text Available Dental impressions can easily become contaminated with patient’s blood and saliva which are capable of transmitting infectious diseases to dental personnel. The addition of antimicrobial agents into impression materials could be effective in reducing the chances of cross-infection. Silver nanoparticles have been applied in dentistry as a potent antimicrobial agent. This study aims to evaluate the in vitro antimicrobial efficacy of silver nanoparticles incorporated to irreversible hydrocolloid impression material against Staphylococcus aureus. Silver nanoparticles (AgZrPO4, National Direct Network Company, Thailand at concentrations of 0.25%, 0.50%, 1.00% and 1.50% w/w were added to powder of impression materials (Kromopan, Lascod, Ilaty. Impression material samples were prepared on sterile plate in accordance with manufacturer’s instruction. After setting, a 100 microliter of S. aureus ATCC6538 suspension (106 cells/mL were inoculated on the surface of the impression sample and left for 10 minutes. The amount of S. aureus on the surface was quantified using imprint technique on Mannitol Salt agar. Impression materials incorporated with AgZrPO4 showed antimicrobial property against S. aureus (up to 95% reduction compared with control (impression material without AgZrPO4. Even though the mechanism of antimicrobial action was not clearly understood, AgZrPO4 incorporated to impression material was demonstrated to possess an inhibitory effect against pathogenic bacteria. Further studies are needed to investigate physical properties of the material and the clinical usage.

Synthesis, Characterizations, and Applications of Metal-Ions Incorporated High Quality MCM-41 Catalysts

International Nuclear Information System (INIS)

Lim, Steven S.; Haller, Gary L.

2013-01-01

Various metal ions (transition and base metals) incorporated MCM-41 catalysts can be synthesized using colloidal and soluble silica with non-sodium involved process. Transition metal ion-typically V 5+ , Co 2+ , and Ni 2+ -incorporated MCM-41 catalysts were synthesized by isomorphous substitution of Si ions in the framework. Each incorporated metal ion created a single species in the silica framework, single-site solid catalyst, showing a substantial stability in reduction and catalytic activity. Radius of pore curvature effect was investigated with Co-MCM-41 by temperature programmed reduction (TPR). The size of metallic Co clusters, sub-nanometer, could be controlled by a proper reduction treatment of Co-MCM-41 having different pore size and the initial pH adjustment of the Co-MCM-41 synthesis solution. These small metallic clusters showed a high stability under a harsh reaction condition without serious migration, resulting from a direct anchoring of small metallic clusters to the partially or unreduced metal ions on the surface. After a complete reduction, partial occlusion of the metallic cluster surface by amorphous silica stabilized the particles against aggregations. As a probe reaction of particle size sensitivity, carbon single wall nanotubes (SWNT) were synthesized using Co-MCM-41. A metallic cluster stability test was performed by CO methanation using Co- and Ni-MCM-41. Methanol and methane partial oxidations were carried out with V-MCM-41, and the radius of pore curvature effect on the catalytic activity was investigated

Ba incorporation in benthic foraminifera

NARCIS (Netherlands)

de Nooijer, L.J.; Brombacher, Anieke; Mewes, A.; Langer, Gerald; Nehrke, G.; Bijma, Jelle; Reichart, G.J.

2017-01-01

Barium (Ba) incorporated in the calcite of many foraminiferal species is proportional to the concentration of Ba in seawater. Since the open ocean concentration of Ba closely follows seawater alkalinity, foraminiferal Ba ∕ Ca can be used to reconstruct the latter. Alternatively, Ba ∕ Ca from

Development of thermoplastic starch blown film by incorporating plasticized chitosan.

Science.gov (United States)

Dang, Khanh Minh; Yoksan, Rangrong

2015-01-22

The objective of the present work was to improve blown film extrusion processability and properties of thermoplastic starch (TPS) film by incorporating plasticized chitosan, with a content of 0.37-1.45%. The effects of chitosan on extrusion processability and melt flow ability of TPS, as well as that on appearance, optical properties, thermal properties, viscoelastic properties and tensile properties of the films were investigated. The possible interactions between chitosan and starch molecules were evaluated by FTIR and XRD techniques. Chitosan and starch molecules could interact via hydrogen bonds, as confirmed from the blue shift of OH bands and the reduction of V-type crystal formation. Although the incorporation of chitosan caused decreased extensibility and melt flow ability, as well as increased yellowness and opacity, the films possessed better extrusion processability, increased tensile strength, rigidity, thermal stability and UV absorption, as well as reduced water absorption and surface stickiness. The obtained TPS/chitosan-based films offer real potential application in the food industry, e.g. as edible films. Copyright © 2014 Elsevier Ltd. All rights reserved.

Ocean acidification modulates the incorporation of radio-labeled heavy metals in the larvae of the Mediterranean sea urchin Paracentrotus lividus.

Science.gov (United States)

Dorey, Narimane; Martin, Sophie; Oberhänsli, François; Teyssié, Jean-Louis; Jeffree, Ross; Lacoue-Labarthe, Thomas

2018-10-01

The marine organisms which inhabit the coastline are exposed to a number of anthropogenic pressures that may interact. For instance, the accumulation of toxic metals present in coastal waters is expected to be modified by ocean acidification through e.g. changes in physiological performance and/or elements availability. Changes in bioaccumulation due to lowering pH are likely to be differently affected depending on the nature (essential vs. non-essential) and speciation of each element. The Mediterranean is of high concern for possible cumulative effects due to strong human influences on the coastline. The aim of this study was to determine the effect of ocean acidification (from pH 8.1 down to -1.0 pH units) on the incorporation kinetics of six trace metals (Mn, Co, Zn, Se, Ag, Cd, Cs) and one radionuclide ( 241 Am) in the larvae of an economically- and ecologically-relevant sea urchin of the Mediterranean coastline: Paracentrotus lividus. The radiolabelled metals and radionuclides added in trace concentrations allowed precise tracing of their incorporation in larvae during the first 74 h of their development. Independently of the expected indirect effect of pH on larval size/developmental rates, Paracentrotus lividus larvae exposed to decreasing pHs incorporated significantly more Mn and Ag and slightly less Cd. The incorporation of Co, Cs and 241 Am was unchanged, and Zn and Se exhibited complex incorporation behaviors. Studies such as this are necessary prerequisites to the implementation of metal toxicity mitigation policies for the future ocean. We discuss possible reasons and mechanisms for the specific effect of pH on each metals. Copyright © 2018 Elsevier Ltd. All rights reserved.

Relationship between release of LH and incorporation of tritiated thymidine in the anterior pituitary gland of the castrated female rat.

Science.gov (United States)

Machiavelli, G A; Romano, M I; Burdman, J A

1985-06-01

Castration of female rats during diestrus increases the concentration of circulating LH from days 3 and the incorporation of 3H thymidine into pituitary DNA from day 5. Both effects are completely abolished by the administration of dihydrotestosterone. Although the i.v. injection of LHRH markedly enhances the concentration of LH in serum, it does not modify the incorporation of 3H thymidine into pituitary DNA. Castration might produce a maximal stimulation in 3H thymidine incorporation and a further stimulation of LH release with LHRH is unable to enhance the incorporation of the radioactive precursor. The results suggest a relationship between LH secretion and DNA synthesis in the pituitary gland of the rat.

Microwave induced stimulation of /sup 32/Pi incorporation into phosphoinositides of rat brain synaptosomes

Energy Technology Data Exchange (ETDEWEB)

Gandhi, C.R.; Ross, D.H.

1989-07-01

Exposure of synaptosomes to microwave radiation at a power density of 10 mW/sq cm or more produced stimulation of the /sup 32/Pi-incorporation into phosphoinositides. The extent of /sup 32/Pi incorporation was found to be much more pronounced in phosphatidylinositol-4-phosphate (PIP), and phosphatidylinositol-4,5-bisphosphate (PIP/sub 2/) as compared to phosphatidylinositol (PI) and phosphatidic acid (PA). Other lipids were also found to incorporate /sup 32/Pi but no significant changes in their labeling were seen after exposure to microwave radiation. Inclusion of 10 mM lithium in the medium reduced the basal labeling of PIP/sub 2/, PIP and PI and increased PA labeling. Li/sup +/ also inhibited the microwave stimulated PIP/sub 2/, PIP and PI labeling but had no effect on PA labeling. Calcium inophore, A/sub 23187/, inhibited the basal and microwave stimulated /sup 32/Pi labeling of PIP and PIP/sub 2/, stimulated basal labeling of PA and PI and had no effect on microwave stimulated PA and PI labeling. Calcium chelator, EGTA, on the other hand, had no effect on basal labeling of PA and PI, stimulated basal PIP and PIP/sub 2/ labeling but did not alter microwave stimulated labeling of these lipids. Exposure of synaptosomes to microwave radiation did not alter the chemical concentration of phosphoinositides indicating that the turnover of these lipids was altered. These results suggest that low frequency microwave radiation alter the metabolism of inositol phospholipids by enhancing their turnover and thus may affect the transmembrane signalling in the nerve endings.

28 CFR 10.5 - Incorporation of papers previously filed.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Incorporation of papers previously filed... CARRYING ON ACTIVITIES WITHIN THE UNITED STATES Registration Statement § 10.5 Incorporation of papers previously filed. Papers and documents already filed with the Attorney General pursuant to the said act and...

Incorporating effects of natural disturbances in managed ecosystems

Science.gov (United States)

John T. Rotenberry; Robert J. Cooper; Joseph M. Wunderle; Kimberley G. Smith

1993-01-01

We briefly review the effects of climate (particularly drought and hurricanes), insect outbreaks, and fire on populations of migrant birds. An important feature of all of these natural disturbances is that they occur over a variety of spatial and temporal scales, thus precluding any simple generalization of their effects or of methods for mitigating those effects. We...

Availability of zeolite as an eliminant for the incorporated radionuclides, (3)

International Nuclear Information System (INIS)

Sato, Itaru; Matsusaka, Naonori; Kobayashi, Haruo; Nishimura, Yoshikazu.

1994-01-01

Zeolite is an inorganic ion-exchanger that is widely used in chemistry, livestock and industry. The authors have tried to apply it to an eliminant for the incorporated radionuclides. In this study, several experiments in vitro and in vivo were carried out to evaluate the effectiveness of zeolite (A-3) in eliminating the incorporated 137 Cs from the body. Zeolite could adsorb 2.2 mmol of cesium ions per one gram of zeolite in cesium chloride solution. This value was only 44% of its ion-exchange capacity but it completely adsorbed 137 Cs within that limit. Coexistence of magnesium, calcium, manganese, cobalt and zinc ions hardly interfered with the adsorption of 137 Cs, but sodium, potassium and copper ions hindered the adsorption in proportion to their concentration. Therefore, sodium and potassium ions may be principal factors inhibiting the adsorption of 137 Cs in the intestinal tract. Biological half-life of 137 Cs was about 5.5 days in control mice. This half-life was significantly reduced to 5.2, 4.5 and 3.9 days by feeding the diet with 1%, 3% and 10% of zeolite, respectively. These results suggest the effectiveness of zeolite in eliminating the 137 Cs from contaminated persons. (author)

Radionuclides incorporation in activated natural nanotubes

International Nuclear Information System (INIS)

Silva, Jose Parra

2016-01-01

Natural palygorskite nanotubes show suitable physical and chemical properties and characteristics to be use as potential nanosorbent and immobilization matrix for the concentration and solidification of radionuclides present in nuclear wastes. In the development process of materials with sorption properties for the incorporation and subsequent immobilization of radionuclides, the most important steps are related with the generation of active sites simultaneously to the increase of the specific surface area and suitable heat treatment to producing the structural folding. This study evaluated the determining parameters and conditions for the activation process of the natural palygorskite nanotubes aiming at the sorption of radionuclides in the nanotubes structure and subsequent evaluation of the parameters involve in the structural folding by heat treatments. The optimized results about the maximum sorption capacity of nickel in activated natural nanotubes show that these structures are apt and suitable for incorporation of radionuclides similar to nickel. By this study is verified that the optimization of the acid activation process is fundamental to improve the sorption capacities for specifics radionuclides by activated natural nanotubes. Acid activation condition optimized maintaining structural integrity was able to remove around 33.3 wt.% of magnesium cations, equivalent to 6.30·10 -4 g·mol -1 , increasing in 42.8% the specific surface area and incorporating the same molar concentration of nickel present in the liquid radioactive waste at 80 min. (author)

Effects of Y incorporation in TaON gate dielectric on electrical performance of GaAs metal-oxide-semiconductor capacitor

Energy Technology Data Exchange (ETDEWEB)

Liu, Li Ning; Choi, Hoi Wai; Lai, Pui To [Department of Electrical and Electronic Engineering, The University of Hong Kong (China); Xu, Jing Ping [School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan (China)

2016-09-15

In this study, GaAs metal-oxide-semiconductor (MOS) capacitors using Y-incorporated TaON as gate dielectric have been investigated. Experimental results show that the sample with a Y/(Y + Ta) atomic ratio of 27.6% exhibits the best device characteristics: high k value (22.9), low interfacestate density (9.0 x 10{sup 11} cm{sup -2} eV{sup -1}), small flatband voltage (1.05 V), small frequency dispersion and low gate leakage current (1.3 x 10{sup -5}A/cm{sup 2} at V{sub fb} + 1 V). These merits should be attributed to the complementary properties of Y{sub 2}O{sub 3} and Ta{sub 2}O{sub 5}:Y can effectively passivate the large amount of oxygen vacancies in Ta{sub 2}O{sub 5}, while the positively-charged oxygen vacancies in Ta{sub 2}O{sub 5} are capable of neutralizing the effects of the negative oxide charges in Y{sub 2}O{sub 3}. This work demonstrates that an appropriate doping of Y content in TaON gate dielectric can effectively improve the electrical performance for GaAs MOS devices. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Incorporation of liquid lipid in lipid nanoparticles for ocular drug delivery enhancement

International Nuclear Information System (INIS)

Shen Jie; Sun Minjie; Ping Qineng; Ying Zhi; Liu Wen

2010-01-01

The present work investigates the effect of liquid lipid incorporation on the physicochemical properties and ocular drug delivery enhancement of nanostructured lipid carriers (NLCs) and attempts to elucidate in vitro and in vivo the potential of NLCs for ocular drug delivery. The CyA-loaded or fluorescein-marked nanocarriers composed of Precifac ATO 5 and Miglyol 840 (as liquid lipid) were prepared by melting-emulsion technology, and the physicochemical properties of nanocarriers were determined. The uptake of nanocarriers by human corneal epithelia cell lines (SDHCEC) and rabbit cornea was examined. Ex vivo fluorescence imaging was used to investigate the ocular distribution of nanocarriers. The in vitro cytotoxicity and in vivo acute tolerance were evaluated. The higher drug loading capacity and improved in vitro sustained drug release behavior of lipid nanoparticles was found with the incorporation of liquid lipid in lipid nanoparticles. The uptake of nanocarriers by the SDHCEC was increased with the increase in liquid lipid loading. The ex vivo fluorescence imaging of the ocular tissues indicated that the liquid lipid incorporation could improve the ocular retention and penetration of ocular therapeutics. No alternation was macroscopically observed in vivo after ocular surface exposure to nanocarriers. These results indicated that NLC was a biocompatible and potential nanocarrier for ocular drug delivery enhancement.

Incorporation of liquid lipid in lipid nanoparticles for ocular drug delivery enhancement

Energy Technology Data Exchange (ETDEWEB)

Shen Jie; Sun Minjie; Ping Qineng; Ying Zhi; Liu Wen, E-mail: Pingqn2004@yahoo.com.cn [School of Pharmacy, China Pharmaceutical University, 24 Tongjia Xiang, Nanjing (China)

2010-01-15

The present work investigates the effect of liquid lipid incorporation on the physicochemical properties and ocular drug delivery enhancement of nanostructured lipid carriers (NLCs) and attempts to elucidate in vitro and in vivo the potential of NLCs for ocular drug delivery. The CyA-loaded or fluorescein-marked nanocarriers composed of Precifac ATO 5 and Miglyol 840 (as liquid lipid) were prepared by melting-emulsion technology, and the physicochemical properties of nanocarriers were determined. The uptake of nanocarriers by human corneal epithelia cell lines (SDHCEC) and rabbit cornea was examined. Ex vivo fluorescence imaging was used to investigate the ocular distribution of nanocarriers. The in vitro cytotoxicity and in vivo acute tolerance were evaluated. The higher drug loading capacity and improved in vitro sustained drug release behavior of lipid nanoparticles was found with the incorporation of liquid lipid in lipid nanoparticles. The uptake of nanocarriers by the SDHCEC was increased with the increase in liquid lipid loading. The ex vivo fluorescence imaging of the ocular tissues indicated that the liquid lipid incorporation could improve the ocular retention and penetration of ocular therapeutics. No alternation was macroscopically observed in vivo after ocular surface exposure to nanocarriers. These results indicated that NLC was a biocompatible and potential nanocarrier for ocular drug delivery enhancement.

Effects of the Soil Incorporation of Increasing Amounts of Non-Fermented Wet Pomace on the Oil Yield and Acid Profile of Sunflower Seeds

Directory of Open Access Journals (Sweden)

Giovanna Cucci

2007-12-01

Full Text Available The agricultural use of olive processing waste is a strategic resource in the integrated management of the agricultural system as it satisfies the two objectives of evacuating the olive-processing residue and using it beneficially for agricultural purposes. For such aims, a research was conducted in Bari (South of Italy to study the effects of the incorporation into the soil of increasing amounts of non-fermented wet pomace (WP (0, 17.5, 35, 70, 105, 140, 175, 210 Mg ha-1 on the oil yield and acid profile of sunflower seeds. The results obtained point out that the seed yield was negatively affected by the application of WP starting from 70 Mg ha-1; an opposite trend was observed for the seed oil yield. The incorporation of WP has also affected the oil fatty acids’ composition. Oleic and linoleic acids, the principal fatty acids (beyond 90% of total fatty acids, showed significant variations: from the control treatment to the one receiving the maximum application of waste, oleic acid decreased (-5.4%, linoleic acid increased (+ 6.6%, and the saturated fatty acids fraction decreased (-7.6%.

Effects of low intensity pulsed ultrasound with and without increased cortical porosity on structural bone allograft incorporation

Directory of Open Access Journals (Sweden)

Ehrhart Nicole

2008-05-01

Full Text Available Abstract Background Though used for over a century, structural bone allografts suffer from a high rate of mechanical failure due to limited graft revitalization even after extended periods in vivo. Novel strategies that aim to improve graft incorporation are lacking but necessary to improve the long-term clinical outcome of patients receiving bone allografts. The current study evaluated the effect of low-intensity pulsed ultrasound (LIPUS, a potent exogenous biophysical stimulus used clinically to accelerate the course of fresh fracture healing, and longitudinal allograft perforations (LAP as non-invasive therapies to improve revitalization of intercalary allografts in a sheep model. Methods Fifteen skeletally-mature ewes were assigned to five experimental groups based on allograft type and treatment: +CTL, -CTL, LIPUS, LAP, LIPUS+LAP. The +CTL animals (n = 3 received a tibial ostectomy with immediate replacement of the resected autologous graft. The -CTL group (n = 3 received fresh frozen ovine tibial allografts. The +CTL and -CTL groups did not receive LAP or LIPUS treatments. The LIPUS treatment group (n = 3, following grafting with fresh frozen ovine tibial allografts, received ultrasound stimulation for 20 minutes/day, 5 days/week, for the duration of the healing period. The LAP treatment group (n = 3 received fresh frozen ovine allografts with 500 μm longitudinal perforations that extended 10 mm into the graft. The LIPUS+LAP treatment group (n = 3 received both LIPUS and LAP interventions. All animals were humanely euthanized four months following graft transplantation for biomechanical and histological analysis. Results After four months of healing, daily LIPUS stimulation of the host-allograft junctions, alone or in combination with LAP, resulted in 30% increases in reconstruction stiffness, paralleled by significant increases (p Conclusion The current study has demonstrated in a large animal model the potential of both LIPUS and LAP

Incorporation of Mobile Application (App) Measures Into the Diagnosis of Smartphone Addiction.

Science.gov (United States)

Lin, Yu-Hsuan; Lin, Po-Hsien; Chiang, Chih-Lin; Lee, Yang-Han; Yang, Cheryl C H; Kuo, Terry B J; Lin, Sheng-Hsuan

2017-07-01

Global smartphone expansion has brought about unprecedented addictive behaviors. The current diagnosis of smartphone addiction is based solely on information from clinical interview. This study aimed to incorporate application (app)-recorded data into psychiatric criteria for the diagnosis of smartphone addiction and to examine the predictive ability of the app-recorded data for the diagnosis of smartphone addiction. Smartphone use data of 79 college students were recorded by a newly developed app for 1 month between December 1, 2013, and May 31, 2014. For each participant, psychiatrists made a diagnosis for smartphone addiction based on 2 approaches: (1) only diagnostic interview (standard diagnosis) and (2) both diagnostic interview and app-recorded data (app-incorporated diagnosis). The app-incorporated diagnosis was further used to build app-incorporated diagnostic criteria. In addition, the app-recorded data were pooled as a score to predict smartphone addiction diagnosis. When app-incorporated diagnosis was used as a gold standard for 12 candidate criteria, 7 criteria showed significant accuracy (area under receiver operating characteristic curve [AUC] > 0.7) and were constructed as app-incorporated diagnostic criteria, which demonstrated remarkable accuracy (92.4%) for app-incorporated diagnosis. In addition, both frequency and duration of daily smartphone use significantly predicted app-incorporated diagnosis (AUC = 0.70 for frequency; AUC = 0.72 for duration). The combination of duration, frequency, and frequency trend for 1 month can accurately predict smartphone addiction diagnosis (AUC = 0.79 for app-incorporated diagnosis; AUC = 0.71 for standard diagnosis). The app-incorporated diagnosis, combining both psychiatric interview and app-recorded data, demonstrated substantial accuracy for smartphone addiction diagnosis. In addition, the app-recorded data performed as an accurate screening tool for app-incorporated diagnosis. © Copyright 2017 Physicians

Effect of the incorporation of chitosan on the physico-chemical, mechanical properties and biological activity on a mixture of polycaprolactone and polyurethanes obtained from castor oil.

Science.gov (United States)

Arévalo, Fabian; Uscategui, Yomaira L; Diaz, Luis; Cobo, Martha; Valero, Manuel F

2016-11-01

In the present study, polyurethane materials were obtained from castor oil, polycaprolactone and isophorone diisocyanate by incorporating different concentrations of chitosan (0.5, 1.0 and 2.0% w/w) as an additive to improve the mechanical properties and the biological activity of polyurethanes. The polyurethanes were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, stress/strain fracture tests and swelling analysis, and the hydrophilic character of the surface was determined by contact angle trials. The objectives of the study were to evaluate the effect of the incorporation of chitosan on the changes of the physico-chemical and mechanical properties and the in vitro biological activity of the polyurethanes. It was found that the incorporation of chitosan enhances the ultimate tensile strength of the polyurethanes and does not affect the strain at fracture in polyurethanes with 5% w/w of polycaprolactone and concentrations of chitosan ranging from 0 to 2% w/w. In addition, PCL5-Q-PU formulations and their degradation products did not affect cell viability of L929 mouse fibroblast and 3T3, respectively. Polyurethane formulations showed antibacterial activities against Staphylococcus aureus and Escherichia coli bacteria. The results of this study have highlighted the potential biomedical application of this polyurethanes related to soft and cardiovascular tissues. © The Author(s) 2016.

Incorporating Argumentation through Forensic Science

Science.gov (United States)

Wheeler, Lindsay B.; Maeng, Jennifer L.; Smetana, Lara K.

2014-01-01

This article outlines how to incorporate argumentation into a forensic science unit using a mock trial. Practical details of the mock trial include: (1) a method of scaffolding students' development of their argument for the trial, (2) a clearly outlined set of expectations for students during the planning and implementation of the mock…

Lung cancer risk and exposure from incorporated plutonium

International Nuclear Information System (INIS)

Koshurnikova, N.A.; Bolotnikova, M.G.; Il'in, L.A.

1996-01-01

Coefficients of risk of death from lung cancer caused by incorporated plutonium for the personnel of the Mayak plant, working there since its foundation are obtained. Values of mortality from lung cancer are analysed as well as individual incorporated dose per lung assessed from regular measurement of plutonium in the urine and radiometry of autopsy material and from the results of individual photocontrol of external exposure. It was shown that the risk of death from lung cancer caused by external gamma-irradiation is statistically unreliable, whereas that from disease caused by incorporated plutonium is dose-dependent. The risk of death from lung cancer is two times higher for the personnel with increased level of plutonium carriership as against the level stated in ICRP Publication 60. The conclusion is made that hygienic standards for lung exposure should be specified. 11 refs.; 3 figs.; 5 tabs

A Liposomal Formulation Able to Incorporate a High Content of Paclitaxel and Exert Promising Anticancer Effect

Directory of Open Access Journals (Sweden)

Pei Kan

2011-01-01

Full Text Available A liposome formulation for paclitaxel was developed in this study. The liposomes, composed of naturally unsaturated and hydrogenated phosphatidylcholines, with significant phase transition temperature difference, were prepared and characterized. The liposomes exhibited a high content of paclitaxel, which was incorporated within the segregated microdomains coexisting on phospholipid bilayer of liposomes. As much as 15% paclitaxel to phospholipid molar ratio were attained without precipitates observed during preparation. In addition, the liposomes remained stable in liquid form at 4∘C for at least 6 months. The special composition of liposomal membrane which could reduce paclitaxel aggregation could account for such a capacity and stability. The cytotoxicity of prepared paclitaxel liposomes on the colon cancer C-26 cell culture was comparable to Taxol. Acute toxicity test revealed that LD50 for intravenous bolus injection in mice exceeded by 40 mg/kg. In antitumor efficacy study, the prepared liposomal paclitaxel demonstrated the increase in the efficacy against human cancer in animal model. Taken together, the novel formulated liposomes can incorporate high content of paclitaxel, remaining stable for long-term storage. These animal data also demonstrate that the liposomal paclitaxel is promising for further clinical use.

An approximation of herd effect due to vaccinating children against seasonal influenza - a potential solution to the incorporation of indirect effects into static models.

Science.gov (United States)

Van Vlaenderen, Ilse; Van Bellinghen, Laure-Anne; Meier, Genevieve; Nautrup, Barbara Poulsen

2013-01-22

Indirect herd effect from vaccination of children offers potential for improving the effectiveness of influenza prevention in the remaining unvaccinated population. Static models used in cost-effectiveness analyses cannot dynamically capture herd effects. The objective of this study was to develop a methodology to allow herd effect associated with vaccinating children against seasonal influenza to be incorporated into static models evaluating the cost-effectiveness of influenza vaccination. Two previously published linear equations for approximation of herd effects in general were compared with the results of a structured literature review undertaken using PubMed searches to identify data on herd effects specific to influenza vaccination. A linear function was fitted to point estimates from the literature using the sum of squared residuals. The literature review identified 21 publications on 20 studies for inclusion. Six studies provided data on a mathematical relationship between effective vaccine coverage in subgroups and reduction of influenza infection in a larger unvaccinated population. These supported a linear relationship when effective vaccine coverage in a subgroup population was between 20% and 80%. Three studies evaluating herd effect at a community level, specifically induced by vaccinating children, provided point estimates for fitting linear equations. The fitted linear equation for herd protection in the target population for vaccination (children) was slightly less conservative than a previously published equation for herd effects in general. The fitted linear equation for herd protection in the non-target population was considerably less conservative than the previously published equation. This method of approximating herd effect requires simple adjustments to the annual baseline risk of influenza in static models: (1) for the age group targeted by the childhood vaccination strategy (i.e. children); and (2) for other age groups not targeted (e

In-vitro assessment and pharmacodynamics of nimesulide incorporated Aloe vera transemulgel.

Science.gov (United States)

Vandana, K R; Yalavarthi, Prasanna R; Sundaresan, C R; Sriramaneni, Raghava N; Vadlamudi, Harini C

2014-06-01

The aim of the investigation was to prepare nimesulide emulsion for incorporation in Aloe vera gel base to formulate 'nimesulide - Aloe vera transemulgel' (NAE) and to carryout in-vitro assessment and in-vivo anti-inflammatory studies of the product. Although the use of nimesulide is banned for oral administration, due to its potential for inducing hepatotoxicity and thrombocytopenia, the use of nimesulide for topical delivery is prominent in the treatment of many inflammatory conditions including rheumatoid arthritis. The drug loading capacity of transdermal gels is low for hydrophobic drugs such as nimesulide. Nimesulide can be effectively incorporated into emulgels (a combination of emulsion and gel). Aloe vera has a mild anti-inflammatory effect and in the present study Aloe vera gel was formulated and used as a gel base to prepare NAE. The emulgels thus prepared were evaluated for viscosity, pH, in-vitro permeation, stability and skin irritation test. In-vivo anti-inflammatory studies were performed using carrageenan induced hind paw edema method in Wistar rats. The results were compared with that of commercial nimesulide gel (CNG). From the in-vitro studies, effective permeation of nimesulide from NAE (53.04 %) was observed compared to CNG (44.72 %) at 30 min indicating better drug release from NAE. Topical application of the emulgel found no skin irritation. Stability studies proved the integrity of the formulation. The percentage of inhibition of edema was highest for the prepared NAE (67.4 % inhibition after 240 min) compared to CNG (59.6 %). From our results, it was concluded that the Aloe vera gel acts as an effective gel base to prepare nimesulide emulgel with high drug loading capacity (86.4 % drug content) compared to CNG (70.5 % drug content) with significant anti-inflammatory effect.

College Algebra in Context: A Project Incorporating Social Issues

Directory of Open Access Journals (Sweden)

Michael T. Catalano

2010-01-01

Full Text Available This paper discusses the development of an innovative college algebra text designed for use in a data-driven, activity-oriented college algebra course, incorporating realistic problem situations emphasizing social and economic issues, including hunger and poverty, energy, and the environment. The course incorporates quantitative literacy themes, is informed by existing college algebra texts within the college algebra reform movement, and implements a collaborative pedagogical approach intended to provide future K-12 teachers an alternative model for the teaching of mathematics. The paper contains a short history of the project development phase, supported by an NSF grant (DUE #0442979, as well as the perceived role of the project in the college algebra reform and quantitative literacy movements. We make a short case for redefining the content of a college algebra course and acknowledging that for many students, it has become a terminal mathematics course. A description of the contents of the text, its relation to more traditional college algebra content, and four example student activities are included (on the topics of homelessness, the effects of airline deregulation, real estate versus savings as investment instruments, and the 2008 election. A summary of evaluation and assessment data from five years of pilot-testing, done primarily in conjuction with our NSF grant evaluation plan, is provided.

Incorporation feasibility of leather residues in bricks

Energy Technology Data Exchange (ETDEWEB)

Aguiar, J.B. [Minho Univ. (Portugal). Civil Engineering Dept.; Valente, A.; Pires, M.J. [Inst. of Development and Innovation Technology of Minho, Braga (Portugal); Tavares, T. [Biological Engineering Dept., Univ. of Minho, Braga (Portugal)

2002-07-01

The footwear industry has strips of leather as one of its by-products. These leather residues, due to their high chromium content, can be regarded as a threat to the environment, particularly if no care is taken with their disposal. With the incorporation of the residues in ceramic products, after trituration, is possible to neutralise the eventual toxicity of chromium. In a laboratory study we produced prismatic bricks using clay from the region and incorporating 1, 3 and 5% (by mass) of leather residues. This corresponds at about 20, 60 and 100% (by apparent volume). The moulds were filled up with paste and, in order to have some compactness, the ceramic paste was compressed with a spatula. After that, it began the process of drying and burning the bricks. They were tested to flexure, compression and leaching. The results showed that the toxicity of chromium disappeared in the bricks. The mechanical tests showed a decrease in strength for the specimens with leather residue. The compressive strength decreases about 22% for 1% of incorporation of leather residue. However, as bricks were lighter and more porous, we can expect that they are better for thermal isolation. (orig.)

Band gap engineering of indium zinc oxide by nitrogen incorporation

Energy Technology Data Exchange (ETDEWEB)

Ortega, J.J., E-mail: jjosila@hotmail.com [Unidad Académica de Física, Universidad Autónoma de Zacatecas, Calzada Solidaridad esq. Paseo la Bufa, Fracc. Progreso, C.P. 98060 Zacatecas (Mexico); Doctorado Institucional de Ingeniería y Ciencia de Materiales, Universidad Autónoma de San Luis Potosí, Av. Salvador Nava, Zona Universitaria, C.P. 78270 San Luis Potosí (Mexico); Aguilar-Frutis, M.A.; Alarcón, G. [Centro de Investigación en Ciencia Aplicada y Tecnología Avanzada del Instituto Politécnico Nacional, Unidad Legaría, Calz. Legaría No. 694, Col. Irrigación, C.P. 11500 México D.F. (Mexico); Falcony, C. [Departamento de Física, Centro de Investigación y Estudios Avanzados del Instituto Politécnico Nacional campus Zacatenco, Av. Instituto Politécnico Nacional 2508, Col. San Pedro Zacatenco, C.P. 07360 México D.F. (Mexico); and others

2014-09-15

Highlights: • IZON thin films were deposited by RF reactive sputtering at room temperature. • The effects of nitrogen on physical properties of IZO were analyzed. • Optical properties of IZON were studied by SE and UV–vis spectroscopy. • Adachi and classical parameters were quantitative and qualitatively congruent. • Nitrogen induces a gradual narrowing band gap from 3.5 to 2.5 eV on IZON films. - Abstract: The effects of nitrogen incorporation in indium zinc oxide films, as grown by RF reactive magnetron sputtering, on the structural, electrical and optical properties were studied. It was determined that the variation of the N{sub 2}/Ar ratio, in the reactive gas flux, was directly proportional to the nitrogen percentage measured in the sample, and the incorporated nitrogen, which substituted oxygen in the films induces changes in the band gap of the films. This phenomenon was observed by measurement of absorption and transmission spectroscopy in conjunction with spectral ellipsometry. To fit the ellipsometry spectra, the classical and Adachi dispersion models were used. The obtained optical parameters presented notable changes related to the increment of the nitrogen in the film. The band gap narrowed from 3.5 to 2.5 eV as the N{sub 2}/Ar ratio was increased. The lowest resistivity obtained for these films was 3.8 × 10{sup −4} Ω cm with a carrier concentration of 5.1 × 10{sup 20} cm{sup −3}.

Band gap engineering of indium zinc oxide by nitrogen incorporation

International Nuclear Information System (INIS)

Ortega, J.J.; Aguilar-Frutis, M.A.; Alarcón, G.; Falcony, C.

2014-01-01

Highlights: • IZON thin films were deposited by RF reactive sputtering at room temperature. • The effects of nitrogen on physical properties of IZO were analyzed. • Optical properties of IZON were studied by SE and UV–vis spectroscopy. • Adachi and classical parameters were quantitative and qualitatively congruent. • Nitrogen induces a gradual narrowing band gap from 3.5 to 2.5 eV on IZON films. - Abstract: The effects of nitrogen incorporation in indium zinc oxide films, as grown by RF reactive magnetron sputtering, on the structural, electrical and optical properties were studied. It was determined that the variation of the N 2 /Ar ratio, in the reactive gas flux, was directly proportional to the nitrogen percentage measured in the sample, and the incorporated nitrogen, which substituted oxygen in the films induces changes in the band gap of the films. This phenomenon was observed by measurement of absorption and transmission spectroscopy in conjunction with spectral ellipsometry. To fit the ellipsometry spectra, the classical and Adachi dispersion models were used. The obtained optical parameters presented notable changes related to the increment of the nitrogen in the film. The band gap narrowed from 3.5 to 2.5 eV as the N 2 /Ar ratio was increased. The lowest resistivity obtained for these films was 3.8 × 10 −4 Ω cm with a carrier concentration of 5.1 × 10 20 cm −3

Fabrication of nanoporous Sr incorporated TiO{sub 2} coating on 316L SS: Evaluation of bioactivity and corrosion protection

Energy Technology Data Exchange (ETDEWEB)

Anne Pauline, S. [Department of Chemistry, Anna University, Chennai 600025 (India); Kamachi Mudali, U. [Corrosion Science and Technology Section, IGCAR, Kalpakkam 603102 (India); Rajendran, N., E-mail: nrajendran@annauniv.edu [Department of Chemistry, Anna University, Chennai 600025 (India)

2013-10-01

In this paper, nanoporous TiO{sub 2} and Sr-incorporated TiO{sub 2} coated 316L SS were prepared by sol–gel methodology. The effect of Sr incorporation into TiO{sub 2} coating on bioactivity and corrosion resistance was investigated. Attenuated total reflectance–Fourier transform infrared (ATR–FTIR) spectroscopy, X-ray diffraction analysis (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX) results obtained after in vitro bioactivity test confirm the excellent growth of crystalline hydroxyapatite (HAp) over nanoporous Sr-incorporated TiO{sub 2} coated 316L SS which may be attributed to the slow and steady release of Sr ions from the coatings. The electrochemical evaluation of the coatings confirms that Sr-incorporated TiO{sub 2} coating offer excellent protection to 316L SS by acting as a barrier layer. The results showed that the incorporation of Sr enhanced both bioactivity and corrosion resistance of 316L SS. Hence Sr-incorporated TiO{sub 2} coated 316L SS is a promising material for orthopaedic implant applications. - Highlights: • Nanoporous Sr-incorporated TiO{sub 2} coatings were successfully fabricated on 316L SS. • The coatings have excellent adhesion to the substrate and appreciable Vickers micro hardness value. • Sr-incorporated TiO{sub 2} coated specimens exhibited excellent hydroxyapatite growth due to slow release of Sr from the coating. • Sr incorporation enhances the corrosion resistance of TiO{sub 2} coating.

Incorporating comparative genomics into the design-test-learn cycle of microbial strain engineering.

Science.gov (United States)

Sardi, Maria; Gasch, Audrey P

2017-08-01

Engineering microbes with new properties is an important goal in industrial engineering, to establish biological factories for production of biofuels, commodity chemicals and pharmaceutics. But engineering microbes to produce new compounds with high yield remains a major challenge toward economically viable production. Incorporating several modern approaches, including synthetic and systems biology, metabolic modeling and regulatory rewiring, has proven to significantly advance industrial strain engineering. This review highlights how comparative genomics can also facilitate strain engineering, by identifying novel genes and pathways, regulatory mechanisms and genetic background effects for engineering. We discuss how incorporating comparative genomics into the design-test-learn cycle of strain engineering can provide novel information that complements other engineering strategies. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Incorporating other texts: Intertextuality in Malaysian CSR reports

Directory of Open Access Journals (Sweden)

Kumaran Rajandran

2016-11-01

Full Text Available In Malaysia, corporate social responsibility (CSR is relatively new but corporations have been required to engage in and disclose their CSR. A typical genre for disclosure is CSR reports and these reports often refer to other texts. The article investigates the act of referencing to other texts or intertextuality in Malaysian CSR reports. It creates an archive of CEO Statements and Environment Sections in CSR reports and studies the archive for keywords, which can identify the incorporated texts. The function of these texts is examined in relation to Malaysia’s corporate context. CSR reports contain explicit references to documents (policies, regulations, reports, research, standards and to individuals/groups (CEOs, stakeholders, expert organizations. The incorporated texts display variation in corporate control, which organizes these texts along an intertextual cline. The cline helps to identify corporate and non-corporate sources among the texts. The selection of incorporated texts may reflect government and stock exchange demands. The texts are not standardized and are relevant for the CSR domain and corporations, where these texts monitor and justify CSR performance. Yet, the incorporated texts may perpetuate inexact reporting because corporations select the texts and the parts of texts to refer to. Since these texts have been employed to scrutinize initiatives and results, CSR reports can claim to represent the “truth” about a corporation’s CSR. Hence, intertextuality serves corporate interests.

Quantitative isotope incorporation reveals substrate partitioning in a coastal microbial community.

Science.gov (United States)

Mayali, Xavier; Weber, Peter K

2018-05-01

To quantitatively link microbial identity with biogeochemical function, we carried out 14 simultaneous stable isotope probing experiments with organic and inorganic C and N substrates to measure the isotope incorporation by over one hundred co-occurring eukaryotic and prokaryotic populations in a coastal community. We found that nitrate was the most commonly incorporated substrate, and that light-driven carbon fixation was carried out by some bacterial taxa from the Flavobacteriales and OM60 (NOR5) clade, in addition to photoautotrophic phytoplankton. We found that organisms that incorporated starch, maltose, glucose, lactose and bicarbonate were phylogenetically clustered, suggesting that specific bacterial lineages specialized in the incorporation of these substrates. The data further revealed that coastal microorganisms spanned a range of resource utilization strategies from generalists to specialists and demonstrated a high level of substrate partitioning, with two thirds of taxa exhibiting unique substrate incorporation patterns and the remaining third shared by no more than three OTUs each. Specialists exhibited more extreme incorporation levels (high or low), whereas generalists displayed more intermediate activity levels. These results shed valuable insights into the bottom-up ecological strategies enabling the persistence of high microbial diversity in aquatic ecosystems.

Study on the effects of wheat bran incorporation on water mobility and biopolymer behavior during bread making and storage using time-domain 1H NMR relaxometry.

Science.gov (United States)

Hemdane, S; Jacobs, P J; Bosmans, G M; Verspreet, J; Delcour, J A; Courtin, C M

2017-12-01

Water binding is suggested to be key in the deleterious effect of wheat bran on bread quality. This study investigates water mobility and biopolymer behavior during bran-rich bread making and storage, using 1 H NMR. Coarse, ground, and pericarp-enriched bran were incorporated in bread dough, and their impact on freshly baked and stored bread properties was assessed. Compared to wheat flour control dough, bran incorporation resulted in a progressive immobilization of water during dough resting, which could be linked to changes in evolution of dough height during fermentation and oven rise. This, together with modified starch gelatinization behavior upon baking, can be related with the inferior quality of bran-rich breads. The impact was most pronounced with pericarp-enriched bran. Textural quality during storage was less affected for coarse or ground bran-rich bread compared to wheat flour bread, which could be principally attributed to retardation of amylopectin retrogradation in the presence of bran. Copyright © 2017 Elsevier Ltd. All rights reserved.

Lipid structure does not modify incorporation of EPA and DHA into blood lipids in healthy adults: a randomised-controlled trial.

Science.gov (United States)

West, Annette L; Burdge, Graham C; Calder, Philip C

2016-09-01

Dietary supplementation is an effective means to improve EPA and DHA status. However, it is unclear whether lipid structure affects EPA+DHA bioavailability. We determined the effect of consuming different EPA and DHA lipid structures on their concentrations in blood during the postprandial period and during dietary supplementation compared with unmodified fish oil TAG (uTAG). In a postprandial cross-over study, healthy men (n 9) consumed in random order test meals containing 1·1 g EPA+0·37 g DHA as either uTAG, re-esterified TAG, free fatty acids (FFA) or ethyl esters (EE). In a parallel design supplementation study, healthy men and women (n 10/sex per supplement) consumed one supplement type for 12 weeks. Fatty acid composition was determined by GC. EPA incorporation over 6 h into TAG or phosphatidylcholine (PC) did not differ between lipid structures. EPA enrichment in NEFA was lower from EE than from uTAG (P=0·01). Plasma TAG, PC or NEFA DHA incorporation did not differ between lipid structures. Lipid structure did not affect TAG or NEFA EPA incorporation and PC or NEFA DHA incorporation following dietary supplementation. Plasma TAG peak DHA incorporation was greater (P=0·02) and time to peak shorter (P=0·02) from FFA than from uTAG in men. In both studies, the order of EPA and DHA incorporation was PC>TAG>NEFA. In conclusion, EPA and DHA lipid structure may not be an important consideration in dietary interventions.

A Comparison of Tissue Engineering Scaffolds Incorporated with Manuka Honey of Varying UMF

Directory of Open Access Journals (Sweden)

Katherine R. Hixon

2017-01-01

Full Text Available Purpose. Manuka honey (MH is an antibacterial agent specific to the islands of New Zealand containing both hydrogen peroxide and a Unique Manuka Factor (UMF. Although the antibacterial properties of MH have been studied, the effect of varying UMF of MH incorporated into tissue engineered scaffolds have not. Therefore, this study was designed to compare silk fibroin cryogels and electrospun scaffolds incorporated with a 5% MH concentration of various UMF. Methods. Characteristics such as porosity, bacterial clearance and adhesion, and cytotoxicity were compared. Results. Pore diameters for all cryogels were between 51 and 60 µm, while electrospun scaffolds were 10 µm. Cryogels of varying UMF displayed clearance of approximately 0.16 cm for E. coli and S. aureus. In comparison, the electrospun scaffolds clearance ranged between 0.5 and 1 cm. A glucose release of 0.5 mg/mL was observed for the first 24 hours by all scaffolds, regardless of UMF. With respect to cytotoxicity, neither scaffold caused the cell number to drop below 20,000. Conclusions. Overall, when comparing the effects of the various UMF within the two scaffolds, no significant differences were observed. This suggests that the fabricated scaffolds in this study displayed similar bacterial effects regardless of the UMF value.

/sup 3/H-UTP incorporation in polytene chromosomes of Chironomus permeabilized cells

Energy Technology Data Exchange (ETDEWEB)

Diez, J L; de la Torre, C [Consejo Superior de Investigacionis Cientificas, Madrid (Spain). Inst. Biologia Celular

1979-01-01

A method is described that allows the cytologic detection of the transcriptional activity of endogenous RNA polymerase in fixed Chironomus polytene chromosomes. /sup 3/H-UTP is preferentially incorporated onto nucleoli and Balbiani rings where transcription is specially high. The former incorporation was sensitive to actinomycin D while incorporation on Balbiani rings was sensitive to ..cap alpha..-amanitin. The label pattern and frequency resemble those detected by /sup 3/H-uridine incorporation in the living state.

The relationship between DNA synthesis and incorporation of (14C) lysine into different histone fractions in Ehrlich ascites tumour cells

International Nuclear Information System (INIS)

Malec, J.; Kornacka, L.; Wojnarowska, M.; Moscicka, M.

1974-01-01

The effect of inhibition of DNA synthesis by hydroxyurea on ( 14 C) lysine incorporation into the main four histone fractions in Ehrlich ascites tumor cells, was examined in vitro. The radioactivity of lysine-rich histones, especially of histone f1, was preferentially decreased. The smallest decrease was observed for histone f3. The incorporation into other cellular proteins was but slightly affected. (author)

MoO3 incorporation in magnesium aluminosilicate glasses

International Nuclear Information System (INIS)

Tan, Shengheng; Ojovan, Michael I.; Hyatt, Neil C.; Hand, Russell J.

2015-01-01

Molybdate has a very low solubility in silicate and borosilicate glass systems and its excess presence in nuclear waste glass can cause the formation of a readily soluble “yellow phase”. In this study, the incorporation of molybdenum oxide (MoO 3 ) in a magnesium aluminosilicate glass system has been investigated. The prepared glasses show a higher than 90% molybdenum retention rate and up to 5.34 mol% (12.28 wt%) MoO 3 can be incorporated into these glasses without causing visible phase separation. The incorporation of MoO 3 increases glass density, decreases glass transition and crystallisation temperatures and intensifies Raman bands assigned to vibrations of MoO 4 2− units. When excess molybdate is added liquid–liquid phase separation and crystallisation occurs. The separated phase is spherical, 200–400 nm in diameter and randomly dispersed. Based on powder X-ray diffraction, Raman spectroscopy and transmission electron microscopy, the separated phase is identified as MgMoO 4

Thymidine uptake, thymidine incorporation, and thymidine kinase activity in marine bacterium isolates

International Nuclear Information System (INIS)

Jeffrey, W.H.; Paul, J.H.

1990-01-01

One assumption made in bacterial production estimates from [ 3 H]thymidine incorporation is that all heterotrophic bacteria can incorporate exogenous thymidine into DNA. Heterotrophic marine bacterium isolates from Tampa Bay, Fla., Chesapeake Bay, Md., and a coral surface microlayer were examined for thymidine uptake (transport), thymidine incorporation, the presence of thymidine kinase genes, and thymidine kinase enzyme activity. Of the 41 isolates tested, 37 were capable of thymidine incorporation into DNA. The four organisms that could not incorporate thymidine also transported the thymidine poorly and lacked thymidine kinase activity. Attempts to detect thymidine kinase genes in the marine isolates by molecular probing with gene probes made from Escherichia coli and herpes simplex virus thymidine kinase genes proved unsuccessful. To determine if the inability to incorporate thymidine was due to the lack of thymidine kinase, one organism, Vibro sp. strain DI9, was transformed with a plasmid (pGQ3) that contained an E. coli thymidine kinase gene. Although enzyme assays indicated high levels of thymidine kinase activity in transformants, these cells still failed to incorporate exogenous thymidine into DNA or to transport thymidine into cells. These results indicate that the inability of certain marine bacteria to incorporate thymidine may not be solely due to the lack of thymidine kinase activity but may also be due to the absence of thymidine transport systems

On the effectiveness of incorporating shear thickening fluid with fumed silica particles in hip protectors

Science.gov (United States)

Haris, A.; Goh, B. W. Y.; Tay, T. E.; Lee, H. P.; Rammohan, A. V.; Tan, V. B. C.

2018-01-01

The objective of this research is to develop a smart hip protector by incorporating shear thickening fluid (STF) into conventional foam hip protectors. The shear thickening properties of fumed silica particles dispersed in liquid polyethylene glycol (PEG) were determined from rheological tests. Dynamic drop tests, using a 4 kg drop platen at 0.5 m drop height, were conducted to study how STF improves energy absorption as compared to unfilled foam and PEG filled foam. The results show that PEG filled foam reduces the mean peak force transmitted by a further 55% and mean peak displacement by 32.5% as compared to the unfilled foam; the STF filled foam further reduces mean peak force and displacement by 15% and 41% respectively when compared to the PEG filled foam. At a displacement of 22 mm, the STF filled foam absorbs 7.4 times more energy than the PEG filled foam. The results of varying the drop mass and drop height show that the energy absorbed per unit displacement for STF filled foam is always higher than that of PEG filled foam. Finally, the effectiveness of a prototype of hip protector made from 15 mm thick STF filled foam in preventing hip fractures was studied under two different loading conditions: distributed load (plate drop test) and concentrated load (ball drop test). The results of the plate and ball drop tests show that among all hip protectors tested in this study, only the prototype can reduce the mean peak impact force to be lower than the force required to fracture a hip bone (3.1 kN) regardless of the type of loading. Moreover, the peak force of the prototype is about half of this value, suggesting thinner prototype could have been used instead. These findings show that STF is effective in improving the performance of hip protectors.

Mechanical, physico-chemical, and antimicrobial properties of gelatin-based film incorporated with catechin-lysozyme

Directory of Open Access Journals (Sweden)

Rawdkuen Saroat

2012-11-01

Full Text Available Abstract Background Microbial activity is a primary cause of deterioration in many foods and is often responsible for reduced quality and safety. Food-borne illnesses associated with E. coli O157:H7, S. aureus, S. enteritidis and L. monocytogenes are a major public health concern throughout the world. A number of methods have been employed to control or prevent the growth of these microorganisms in food. Antimicrobial packaging is one of the most promising active packaging systems for effectively retarding the growth of food spoilage and pathogenic microorganisms. The aim of this study was to determine the mechanical, physico-chemical properties and inhibitory effects of the fish gelatin films against selected food spoilage microorganisms when incorporated with catechin-lysozyme. Results The effect of the catechin-lysozyme combination addition (CLC: 0, 0.125, 0.25, and 0.5%, w/v on fish gelatin film properties was monitored. At the level of 0.5% addition, the CLC showed the greatest elongation at break (EAB at 143.17% with 0.039 mm thickness, and the lowest water vapor permeability (WVP at 6.5 x 10−8 g·mm·h-1·cm-2·Pa-1, whereas the control showed high tensile strength (TS and the highest WVP. Regarding color attributes, the gelatin film without CLC addition gave the highest lightness (L* 91.95 but lowest in redness (a*-1.29 and yellowness (b* 2.25 values. The light transmission of the film did not significantly decrease and nor did film transparency (p>0.05 with increased CLC. Incorporating CLC could not affect the film microstructure. The solubility of the gelatin based film incorporated with CLC was not affected, especially at a high level of addition (p>0.05. Inhibitory activity of the fish gelatin film against E.coli, S.aureus, L. innocua and S. cerevisiae was concentration dependent. Conclusions These findings suggested that CLC incorporation can improve mechanical, physico-chemical, and antimicrobial properties of the resulting films

Antifungal, optical, and mechanical properties of polymethylmethacrylate material incorporated with silanized zinc oxide nanoparticles

Directory of Open Access Journals (Sweden)

Kamonkhantikul K

2017-03-01

Full Text Available Krid Kamonkhantikul,1 Mansuang Arksornnukit,1 Hidekazu Takahashi2 1Department of Prosthodontics, Faculty of Dentistry, Chulalongkorn University, Bangkok, Thailand; 2Oral Biomaterials Engineering, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo, Japan Background: Fungal infected denture, which is typically composed of polymethylmethacrylate (PMMA, is a common problem for a denture wearer, especially an elderly patient with limited manual dexterity. Therefore, increasing the antifungal effect of denture by incorporating surface modification nanoparticles into the PMMA, while retaining its mechanical properties, is of interest. Aim of the study: This study aimed to evaluate antifungal, optical, and mechanical properties of heat-cured PMMA incorporated with different amounts of zinc oxide nanoparticles (ZnOnps with or without methacryloxypropyltrimethoxysilane modification. Materials and methods: Specimens made from heat-cured PMMA containing 1.25, 2.5, and 5% (w/w nonsilanized (Nosi or silanized (Si ZnOnps were evaluated. Specimens without filler served as control. The fungal assay was performed placing a Candida albicans suspension on the PMMA surface for 2 h, then Sabouraud Dextrose Broth was added, and growth after 24 h was determined by counting colony forming units on agar plates. A spectrophotometer was used to measure the color in L* (brightness, a* (red-green, b* (yellow-blue and opacity of the experimental groups. Flexural strength and flexural modulus were determined using a three-point bending test on universal testing machine after 37°C water storage for 48 h and 1 month. Results: The antifungal, optical, and mechanical properties of the PMMA incorporated with ZnOnps changed depending on the amount. With the same amount of ZnOnps, the silanized groups demonstrated a greater reduction in C. albicans compared with the Nosi groups. The color difference (ΔE and opacity of the Nosi groups were

Rheological and qualitative characteristics of pea flour incorporated cracker biscuits

Directory of Open Access Journals (Sweden)

Jolana Karovičová

2013-01-01

Full Text Available The suitability of pea flour for cracker biscuits production was investigated in this study. Pea flour was characterised by high protein (21.46 % and ash (3.11 % content and exhibited relatively high emulsifying (37.50 ml/100 ml and foaming (53.50 ml/100 ml capacity. The effect of pea flour incorporation to wheat dough (substitution levels 0, 10, 20 and 30 % on the rheological properties, physical characteristics and sensory parameters of cracker biscuits were also evaluated. Farinographic measurements showed that pea flour addition resulted in increasing of water absorption (from 58.90 to 61.80 % and dough development time (from 3.55 to 4.50 min, whereas dough stability was decreased (from 6.69 to 3.50 min. It was also found that incorporation of pea flour to cracker biscuits modified physical properties of final products by different ways (decreasing of volume index, width and spread ratio, increasing of thickness. From the sensory evaluation revealed that cracker biscuits prepared from blend flour contained 10 % pea flour showed no significant differences from wheat cracker biscuits. Higher levels of pea flour in the products adversely affected the odour, taste, firmness, colour and overall acceptance of final products.

Energy-cascade organic photovoltaic devices incorporating a host-guest architecture.

Science.gov (United States)

Menke, S Matthew; Holmes, Russell J

2015-02-04

In planar heterojunction organic photovoltaic devices (OPVs), broad spectral coverage can be realized by incorporating multiple molecular absorbers in an energy-cascade architecture. Here, this approach is combined with a host-guest donor layer architecture previously shown to optimize exciton transport for the fluorescent organic semiconductor boron subphthalocyanine chloride (SubPc) when diluted in an optically transparent host. In order to maximize the absorption efficiency, energy-cascade OPVs that utilize both photoactive host and guest donor materials are examined using the pairing of SubPc and boron subnaphthalocyanine chloride (SubNc), respectively. In a planar heterojunction architecture, excitons generated on the SubPc host rapidly energy transfer to the SubNc guest, where they may migrate toward the dissociating, donor-acceptor interface. Overall, the incorporation of a photoactive host leads to a 13% enhancement in the short-circuit current density and a 20% enhancement in the power conversion efficiency relative to an optimized host-guest OPV combining SubNc with a nonabsorbing host. This work underscores the potential for further design refinements in planar heterojunction OPVs and demonstrates progress toward the effective separation of functionality between constituent OPV materials.

Incorporation of DL(1-14C)-leucine into muscle proteins in buffalo calves and its response to exogenous insulin

International Nuclear Information System (INIS)

Vivekanandan, R.; Singh, L.N.

1976-01-01

Protein synthesis and the effect of insulin on this process have been studied in buffalo skeletal muscles using DL(1- 14 C)-leucine. The muscle fibres isolated from triceps, showed highest specific radioactivity (SRA) in the sarcoplasmic proteins followed by myofibrillar and stroma proteins. Exogenous insulin stimulated the incorporation in the myofibrillar and stroma fractions but not in the sarcoplasmic proteins. Radioscanning of the polyacrylamide gel electrophorograms further revealed preferential labelling of only some of the myofibrillar proteins in the presence of exogenous insulin. Statistically significant differences in the SRA were observed between nuclear, mitochondrial and post-mitochondrial proteins without exogenous insulin the post-mitochondrial proteins showing highest SRA. Addition of insulin to the assay medium significantly stimulated the incorporation in the nuclear fraction whereas mitochondrial and post-mitochondrial fractions did not respond. Intramuscular injection of insulin, 3 hours prior to collection of tissue, stimulated the incorporation in nuclear as well as post-mitochondrial fractions but had no effect on the mitochondrial protein synthesis. (author)

Electrodeposition of zinc–silica composite coatings: challenges in incorporating functionalized silica particles into a zinc matrix

Directory of Open Access Journals (Sweden)

Tabrisur Rahman Khan, Andreas Erbe, Michael Auinger, Frank Marlow and Michael Rohwerder

2011-01-01

Full Text Available Zinc is a well-known sacrificial coating material for iron and co-deposition of suitable particles is of interest for further improving its corrosion protection performance. However, incorporation of particles that are well dispersible in aqueous electrolytes, such as silica particles, is extremely difficult. Here, we report a detailed study of Zn–SiO2 nanocomposite coatings deposited from a zinc sulfate solution at pH 3. The effect of functionalization of the silica particles on the electro-codeposition was investigated. The best incorporation was achieved for particles modified with SiO2–SH, dithiooxamide or cysteamine; these particles have functional groups that can strongly interact with zinc and therefore incorporate well into the metal matrix. Other modifications (SiO2–NH3+, SiO2–Cl and N,N-dimethyldodecylamine of the silica particles lead to adsorption and entrapment only.

Effect of oxygen incorporation on the structure and elasticity of Ti-Al-O-N coatings synthesized by cathodic arc and high power pulsed magnetron sputtering

Energy Technology Data Exchange (ETDEWEB)

Hans, M., E-mail: hans@mch.rwth-aachen.de; Baben, M. to; Music, D.; Ebenhöch, J.; Schneider, J. M. [Materials Chemistry, RWTH Aachen University, Kopernikusstr. 10, D-52074 Aachen (Germany); Primetzhofer, D. [Department of Physics and Astronomy, Uppsala University, Lägerhyddsvägen 1, S-75120 Uppsala (Sweden); Kurapov, D.; Arndt, M.; Rudigier, H. [Oerlikon Balzers Coating AG, Iramali 18, LI-9496 Balzers, Principality of Liechtenstein (Liechtenstein)

2014-09-07

Ti-Al-O-N coatings were synthesized by cathodic arc and high power pulsed magnetron sputtering. The chemical composition of the coatings was determined by means of elastic recoil detection analysis and energy dispersive X-ray spectroscopy. The effect of oxygen incorporation on the stress-free lattice parameters and Young's moduli of Ti-Al-O-N coatings was investigated by X-ray diffraction and nanoindentation, respectively. As nitrogen is substituted by oxygen, implications for the charge balance may be expected. A reduction in equilibrium volume with increasing O concentration is identified by X-ray diffraction and density functional theory calculations of Ti-Al-O-N supercells reveal the concomitant formation of metal vacancies. Hence, the oxygen incorporation-induced formation of metal vacancies enables charge balancing. Furthermore, nanoindentation experiments reveal a decrease in elastic modulus with increasing O concentration. Based on ab initio data, two causes can be identified for this: First, the metal vacancy-induced reduction in elasticity; and second, the formation of, compared to the corresponding metal nitride bonds, relatively weak Ti-O and Al-O bonds.

Effect of oxygen incorporation on the structure and elasticity of Ti-Al-O-N coatings synthesized by cathodic arc and high power pulsed magnetron sputtering

International Nuclear Information System (INIS)

Hans, M.; Baben, M. to; Music, D.; Ebenhöch, J.; Schneider, J. M.; Primetzhofer, D.; Kurapov, D.; Arndt, M.; Rudigier, H.

2014-01-01

Ti-Al-O-N coatings were synthesized by cathodic arc and high power pulsed magnetron sputtering. The chemical composition of the coatings was determined by means of elastic recoil detection analysis and energy dispersive X-ray spectroscopy. The effect of oxygen incorporation on the stress-free lattice parameters and Young's moduli of Ti-Al-O-N coatings was investigated by X-ray diffraction and nanoindentation, respectively. As nitrogen is substituted by oxygen, implications for the charge balance may be expected. A reduction in equilibrium volume with increasing O concentration is identified by X-ray diffraction and density functional theory calculations of Ti-Al-O-N supercells reveal the concomitant formation of metal vacancies. Hence, the oxygen incorporation-induced formation of metal vacancies enables charge balancing. Furthermore, nanoindentation experiments reveal a decrease in elastic modulus with increasing O concentration. Based on ab initio data, two causes can be identified for this: First, the metal vacancy-induced reduction in elasticity; and second, the formation of, compared to the corresponding metal nitride bonds, relatively weak Ti-O and Al-O bonds

Reliability assessment of power pole infrastructure incorporating deterioration and network maintenance

International Nuclear Information System (INIS)

Ryan, Paraic C.; Stewart, Mark G.; Spencer, Nathan; Li, Yue

2014-01-01

There is considerable investment in timber utility poles worldwide, and there is a need to examine the structural reliability and probability based management optimisation of these power distribution infrastructure elements. The work presented in this paper builds on the existing studies in this area through assessment of both treated and untreated timber power poles, with the effects of deterioration and network maintenance incorporated in the analysis. This more realistic assessment approach, with deterioration and maintenance considered, was achieved using event-based Monte Carlo simulation. The output from the probabilistic model is used to illustrate the importance of considering network maintenance in the time-dependent structural reliability assessment of timber power poles. Under wind load, treated and untreated poles designed and maintained in accordance with existing Australian standards were found to have similar failure rates. However, untreated pole networks required approximately twice as many maintenance based pole replacements to sustain the same level of reliability. The effect of four different network maintenance strategies on infrastructure performance was also investigated herein. This assessment highlighted the fact that slight alterations to network maintenance practices can lead to significant changes in performance of timber power pole networks. - Highlights: • A time-dependent structural reliability model was developed for timber power poles. • Deterioration and network maintenance were incorporated into this event based model. • Network maintenance had a significant impact on power pole wind vulnerability. • Treated and untreated poles designed to Australian standards had similar reliability. • Minor alterations to maintenance strategies had large effects on network performance

GDP-tubulin incorporation into growing microtubules modulates polymer stability.

Science.gov (United States)

Valiron, Odile; Arnal, Isabelle; Caudron, Nicolas; Job, Didier

2010-06-04

Microtubule growth proceeds through the endwise addition of nucleotide-bound tubulin dimers. The microtubule wall is composed of GDP-tubulin subunits, which are thought to come exclusively from the incorporation of GTP-tubulin complexes at microtubule ends followed by GTP hydrolysis within the polymer. The possibility of a direct GDP-tubulin incorporation into growing polymers is regarded as hardly compatible with recent structural data. Here, we have examined GTP-tubulin and GDP-tubulin incorporation into polymerizing microtubules using a minimal assembly system comprised of nucleotide-bound tubulin dimers, in the absence of free nucleotide. We find that GDP-tubulin complexes can efficiently co-polymerize with GTP-tubulin complexes during microtubule assembly. GDP-tubulin incorporation into microtubules occurs with similar efficiency during bulk microtubule assembly as during microtubule growth from seeds or centrosomes. Microtubules formed from GTP-tubulin/GDP-tubulin mixtures display altered microtubule dynamics, in particular a decreased shrinkage rate, apparently due to intrinsic modifications of the polymer disassembly properties. Thus, although microtubules polymerized from GTP-tubulin/GDP-tubulin mixtures or from homogeneous GTP-tubulin solutions are both composed of GDP-tubulin subunits, they have different dynamic properties, and this may reveal a novel form of microtubule "structural plasticity."

Radiation protection measures in case of 125I incorporation

International Nuclear Information System (INIS)

Strobelt, W.

1976-01-01

Thyroid measurements were performed on members of the scientific staff in the whole body counter of the Giessen Radiation Center with an aluminium encapsulated 3'' x 3'' dia. NaI(T1) detector; the personnel under investigation comprised those persons who either handled major quantities of 125 I or worked in the controlled area. The measuring setup, phantom calibration and the limits of measurement that can be attained are discussed. In a few cases of incorporation the effective halflife was determined. The radiation exposure was calculated by the absorbed fractions concept. A hazard is encountered almost exclusively in the iodization of the test substances. (orig./HP) [de

Active Microwave Metamaterials Incorporating Ideal Gain Devices

Directory of Open Access Journals (Sweden)

Hao Xin

2010-12-01

Full Text Available Incorporation of active devices/media such as transistors for microwave and gain media for optics may be very attractive for enabling desired low loss and broadband metamaterials. Such metamaterials can even have gain which may very well lead to new and exciting physical phenomena. We investigate microwave composite right/left-handed transmission lines (CRLH-TL incorporating ideal gain devices such as constant negative resistance. With realistic lumped element values, we have shown that the negative phase constant of this kind of transmission lines is maintained (i.e., left-handedness kept while gain can be obtained (negative attenuation constant of transmission line simultaneously. Possible implementation and challenging issues of the proposed active CRLH-TL are also discussed.

Incorporation of mammalian actin into microfilaments in plant cell nucleus

Directory of Open Access Journals (Sweden)

Paves Heiti

2004-04-01

Full Text Available Abstract Background Actin is an ancient molecule that shows more than 90% amino acid homology between mammalian and plant actins. The regions of the actin molecule that are involved in F-actin assembly are largely conserved, and it is likely that mammalian actin is able to incorporate into microfilaments in plant cells but there is no experimental evidence until now. Results Visualization of microfilaments in onion bulb scale epidermis cells by different techniques revealed that rhodamine-phalloidin stained F-actin besides cytoplasm also in the nuclei whereas GFP-mouse talin hybrid protein did not enter the nuclei. Microinjection of fluorescently labeled actin was applied to study the presence of nuclear microfilaments in plant cells. Ratio imaging of injected fluorescent rabbit skeletal muscle actin and phalloidin staining of the microinjected cells showed that mammalian actin was able to incorporate into plant F-actin. The incorporation occurred preferentially in the nucleus and in the perinuclear region of plant cells whereas part of plant microfilaments, mostly in the periphery of cytoplasm, did not incorporate mammalian actin. Conclusions Microinjected mammalian actin is able to enter plant cell's nucleus, whereas incorporation of mammalian actin into plant F-actin occurs preferentially in the nucleus and perinuclear area.

Incorporating model parameter uncertainty into inverse treatment planning

International Nuclear Information System (INIS)

Lian Jun; Xing Lei

2004-01-01

Radiobiological treatment planning depends not only on the accuracy of the models describing the dose-response relation of different tumors and normal tissues but also on the accuracy of tissue specific radiobiological parameters in these models. Whereas the general formalism remains the same, different sets of model parameters lead to different solutions and thus critically determine the final plan. Here we describe an inverse planning formalism with inclusion of model parameter uncertainties. This is made possible by using a statistical analysis-based frameset developed by our group. In this formalism, the uncertainties of model parameters, such as the parameter a that describes tissue-specific effect in the equivalent uniform dose (EUD) model, are expressed by probability density function and are included in the dose optimization process. We found that the final solution strongly depends on distribution functions of the model parameters. Considering that currently available models for computing biological effects of radiation are simplistic, and the clinical data used to derive the models are sparse and of questionable quality, the proposed technique provides us with an effective tool to minimize the effect caused by the uncertainties in a statistical sense. With the incorporation of the uncertainties, the technique has potential for us to maximally utilize the available radiobiology knowledge for better IMRT treatment

Effect of the incorporation of antimicrobial/antioxidant proteins on the properties of potato starch films.

Science.gov (United States)

Moreno, Olga; Atarés, Lorena; Chiralt, Amparo

2015-11-20

Glycerol plasticized potato starch films containing bioactive proteins (lactoferrin (LF) and/or lysozyme (LZ), at 0.1 and 0.2 ratio with respect to starch) were obtained by casting method and characterized as to their microstructural, thermal and physical (water content, mechanical, water and oxygen barrier, optical) properties. The bioactive properties, named antioxidant and antimicrobial, of the proteins and the films were also characterized. The incorporation of proteins affected the structural and physical properties of potato starch films, while modifying their thermal behavior and increasing the glass transition temperature. Both proteins showed a certain degree of compatibility with starch chains through the bond formations (increase in Tg), while a part is separated and migrates to the film surface. Their incorporation, especially that of lactoferrin, greatly increased the film's brittleness, regardless of the films water content, although they enhance the water vapor and oxygen barrier properties, whatever the age of the film. Protein also reduced the film's transparency and gloss, while lactoferrin induced color changes. The thermal degradation of blend films and isolated proteins occurred at temperatures of over 250°C, which means that blend starch films can be thermoprocessed, according to their thermoplastic properties and following the usual practices of the plastics industries. A synergistic antimicrobial action against Escherichia coli and coliforms was observed when both LZ and LF were simultaneously applied. Both of these exhibited antioxidant capacity. Copyright © 2015. Published by Elsevier Ltd.

The incorporation of technetium into a representative low-activity waste glass

International Nuclear Information System (INIS)

Ebert, W.L.; Bakel, A.J.; Bowers, D.L.; Buck, E.C.; Emery, J.W.

1997-01-01

A glass that has been tested to understand the corrosion behavior of waste glasses with high soda contents for immobilizing Hanford incidental wastes has been made by melting crushed glass with either TcO 2 or NaTcO 4 at 1,100--1,300 C. Incorporation of technetium in the glass was affected by solubility or kinetic effects. Metallic technetium inclusions formed in all the TcO 2 -doped glasses. Inclusions also formed in glasses with added NaTcO 4 that were melted at 1,100 C, but a glass melted at 1,200 C did not contain detectable inclusions. The presence of Tc-bearing inclusions complicates the interpretation of results from dissolution tests because of the simultaneous release of technetium from more than one phase, the unknown surface areas of each phase, and the possible incorporation of technetium that is released from one phase into another phase. A glass containing about 0.15 mass % Tc dissolved in the glass is being used in dissolution tests to study the release behavior of technetium

Effect of incorporation of silver nanoparticles in PEDOT:PSS layer on performance of organic solar cell

Science.gov (United States)

Singh, Joginder; Nirwal, Varun Singh; Bhatnagar, P. K.; Peta, Koteswara Rao

2018-05-01

Solution processable organic solar cells have attracted significant interest in scientific community due to their easy processability, flexibility and eco friendly fabrication. In these organic solar cells structure, PEDOT:PSS layer has major importance as it used as hole transporting layer. In the present work, we have analyzed the effect of incorporation of silver nanoparticles (AgNPs) in PEDOT:PSS layer for P3HT:PCBM based organic solar cells. The presence of Ag nanoparticles in PEDOT:PSS film is confirmed by atomic force microscopy (AFM) images. It has been observed that PEDOT:PSS layer with AgNPs has ˜5.4% more transmittance than PEDOT:PSS layer in most of the visible region, which helps in reaching more light on active layer. Finally, solar cell with structure ITO/PEDOT:PSS:AgNPs/Al is fabricated and J-V characteristics are plotted under illumination. It is observed that there is a significant (˜10%) enhancement in short circuit current and slight increment in open circuit voltage with addition of AgNPs in PEDOT:PSS layer. The calculated value of power conversion efficiency (PCE) of fabricated device without AgNPs in PEDOT:PSS was 1.67%, which increased to 2.02% after addition of AgNPs in PEDOT:PSS layer.

Study of the Photocatalytic Property of Polysulfone Membrane Incorporating TiO2 Nanoparticles

Science.gov (United States)

Chen, Xingxing; Zhou, Weiqi; Chen, Zhe; Yao, Lei

In order to investigate the effect of the incorporated nanoparticles on the photocatalytic property of the hybrid membranes, the uncovered and covered polysulfone/TiO2 hybrid membranes were prepared. Positron annihilation γ-ray spectroscopy coupled with a positron beam was utilized to examine the depth profiles of the two membranes. The photocatalytic activities of the membranes were evaluated by the degradation of Rhodamine B (RhB) aqueous solution under the irradiation of Xe lamp. UV-Vis spectroscopy was applied to study the UV transmission through the polysulfone layer. Electrochemical impedance spectroscopy was used to detect the photo-generated charges by the covered membrane during the irradiation. It can be found that UV light can penetrate through the covered layer (about 230nm), and the incorporated nanoparticles can still generate charges under irradiation, which endows the photocatalytic ability of the covered membrane.

Effect of light, carbon dioxide, and nitrogen nutrition on the incorporation of S from external sulfate into different S-containing fractions in Scenedesmus, with special reference to lipid S

Energy Technology Data Exchange (ETDEWEB)

Kylin, A

1966-01-01

Incorporation of S from the sulfate in the medium into normal cells of Scenedesmus was enhanced by light, relatively most in the case of lipid S and least in the inorganic sulfate fraction. The effects of light were, generally, increased by the presence of CO/sub 2/ and nitrogen salts. CO/sub 2/ did not significantly alter the proportions between the fractions, but the presence of nitrogen increased the formation of protein S more than the synthesis of S-containing lipids. It is suggested that lipid S is formed as a sink, when a step between sulfite and -SH becomes increasingly rate-limiting in the overall reduction of sulfate. Furthermore, incorporation as SO/sub 4//sup 2 -/ and as lipid S may be regulated by more or less independent processes. 15 references, 2 tables.

Incorporating political socialization theory into baccalaureate nursing education.

Science.gov (United States)

Brown, S G

1996-01-01

Political socialization theory explains how an individual develops a political belief system. As the health care system undergoes dramatic changes, nursing faculty should use political socialization theory to enhance the education of student nurses. A political thread can be woven through the nursing curricula, and students can be socialized to the political role. The new generation of nurses must incorporate a political component into their professional role identity. Political socialization theory can guide nursing faculty as knowledge of the political system and political skills are incorporated into nursing curricula.

Probing the mechanistic consequences of 5-fluorine substitution on cytidine nucleotide analogue incorporation by HIV-1 reverse transcriptase.

Science.gov (United States)

Ray, Adrian S; Schinazi, Raymond F; Murakami, Eisuke; Basavapathruni, Aravind; Shi, Junxing; Zorca, Suzana M; Chu, Chung K; Anderson, Karen S

2003-05-01

Beta-D and beta-L-enantiomers of 2',3'-dideoxycytidine analogues are potent chain-terminators and antimetabolites for viral and cellular replication. Seemingly small modifications markedly alter their antiviral and toxicity patterns. This review discusses previously published and recently obtained data on the effects of 5- and 2'-fluorine substitution on the pre-steady state incorporation of 2'-deoxycytidine-5'-monophosphate analogues by HIV-1 reverse transcriptase (RT) in light of their biological activity. The addition of fluorine at the 5-position of the pyrimidine ring altered the kinetic parameters for all nucleotides tested. Only the 5-fluorine substitution of the clinically relevant nucleosides (-)-beta-L-2',3'-dideoxy-3'-thia-5-fluorocytidine (L-FTC, Emtriva), and (+)-beta-D-2',3'-didehydro-2',3'-dideoxy-5-fluorocytidine (D-D4FC, Reverset), caused a higher overall efficiency of nucleotide incorporation during both DNA- and RNA-directed synthesis. Enhanced incorporation by RT may in part explain the potency of these nucleosides against HIV-1. In other cases, a lack of correlation between RT incorporation in enzymatic assays and antiviral activity in cell culture illustrates the importance of other cellular factors in defining antiviral potency. The substitution of fluorine at the 2' position of the deoxyribose ring negatively affects incorporation by RT indicating the steric gate of RT can detect electrostatic perturbations. Intriguing results pertaining to drug resistance have led to a better understanding of HIV-1 RT resistance mechanisms. These insights serve as a basis for understanding the mechanism of action for nucleoside analogues and, coupled with studies on other key enzymes, may lead to the more effective use of fluorine to enhance the potency and selectivity of antiviral agents.

Selective incorporation of 5-hydroxytryptophan into proteins in mammalian cells

Science.gov (United States)

Zhang, Zhiwen; Alfonta, Lital; Schultz, Peter G

2014-02-25

This invention provides methods and compositions for incorporation of an unnatural amino acid into a peptide using an orthogonal aminoacyl tRNA synthetase/tRNA pair. In particular, an orthogonal pair is provided to incorporate 5-hydroxy-L-tryptophan in a position encoded by an opal mutation.

Reduction of Inflammatory Responses and Enhancement of Extracellular Matrix Formation by Vanillin-Incorporated Poly(Lactic-co-Glycolic Acid) Scaffolds

OpenAIRE

Lee, Yujung; Kwon, Jeongil; Khang, Gilson; Lee, Dongwon

2012-01-01

Vanillin is one of the major components of vanilla, a commonly used flavoring agent and preservative and is known to exert potent antioxidant and anti-inflammatory activities. In this work, vanillin-incorporated poly(lactic-co-glycolic acid) (PLGA) films and scaffolds were fabricated to evaluate the effects of vanillin on the inflammatory responses and extracellular matrix (ECM) formation in vitro and in vivo. The incorporation of vanillin to PLGA films induced hydrophilic nature, resulting i...

Evaluating protein incorporation and release in electrospun composite scaffolds for bone tissue engineering applications.

Science.gov (United States)

Briggs, Tonye; Matos, Jeffrey; Collins, George; Arinzeh, Treena Livingston

2015-10-01

Electrospun polymer/ceramic composites have gained interest for use as scaffolds for bone tissue engineering applications. In this study, we investigated methods to incorporate Platelet Derived Growth Factor-BB (PDGF-BB) in electrospun polycaprolactone (PCL) or PCL prepared with polyethylene oxide (PEO), where both contained varying levels (up to 30 wt %) of ceramic composed of biphasic calcium phosphates, hydroxyapatite (HA)/β-tricalcium phosphate (TCP). Using a model protein, lysozyme, we compared two methods of protein incorporation, adsorption and emulsion electrospinning. Adsorption of lysozyme on scaffolds with ceramic resulted in minimal release of lysozyme over time. Using emulsion electrospinning, lysozyme released from scaffolds containing a high concentration of ceramic where the majority of the release occurred at later time points. We investigated the effect of reducing the electrostatic interaction between the protein and the ceramic on protein release with the addition of the cationic surfactant, cetyl trimethylammonium bromide (CTAB). In vitro release studies demonstrated that electrospun scaffolds prepared with CTAB released more lysozyme or PDGF-BB compared with scaffolds without the cationic surfactant. Human mesenchymal stem cells (MSCs) on composite scaffolds containing PDGF-BB incorporated through emulsion electrospinning expressed higher levels of osteogenic markers compared to scaffolds without PDGF-BB, indicating that the bioactivity of the growth factor was maintained. This study revealed methods for incorporating growth factors in polymer/ceramic scaffolds to promote osteoinduction and thereby facilitate bone regeneration. © 2015 Wiley Periodicals, Inc.

Effect of dietary proteins on the incorporation of amino acids in plasma proteins of ruminants

International Nuclear Information System (INIS)

Mehra, Usha R.; Singh, U.B.; Kumar, S.

1979-01-01

Experiments were conducted on nine male calves (Hariana x Holstein) of about one and a half years of age and fed different amounts of crude protein. 14 C-DL-leucine was injected into the blood of the animals and specific radioactivity of plasma protein measured. There was linear correlation between nitrogen ingested, digested and retained by the animals and the specific radioactivity of total plasma proteins. The experiments suggest the possible use of the incorporation of amino acids into plasma proteins as an index of nutritional status of the animals. (auth.)

Fouling Release Coatings Based on Polydimethylsiloxane with the Incorporation of Phenylmethylsilicone Oil

Directory of Open Access Journals (Sweden)

Miao Ba

2018-04-01

Full Text Available In this study, phenylmethylsilicone oil (PSO with different viscosity was used for research in fouling release coatings based on polydimethylsiloxane (PDMS. The surface properties and mechanical properties of the coatings were investigated, while the leaching behavior of PSO from the coatings was studied. Subsequently, the antifouling performance of the coatings was investigated by the benthic diatom adhesion test. The results showed that the coatings with high-viscosity PSO exhibited high levels of hydrophobicity and PSO leaching, while the high PSO content significantly decreased the elastic modulus of the coatings and prolonged the release time of PSO. The antifouling results indicated that the incorporation of PSO into coatings enhanced the antifouling performance of the coating by improving the coating hydrophobicity and decreasing the coating elastic modulus, while the leaching of PSO from the coatings improved the fouling removal rate of the coating. This suggests a double enhancement effect on the antifouling performance of fouling release coatings based on PDMS with PSO incorporated.

Enhancement of antibacterial activity in nanofillers incorporated PSF/PVP membranes

Science.gov (United States)

Pramila, P.; Gopalakrishnan, N.

2018-04-01

An attempt has been made to investigate the nanofillers incorporated polysulfone (PSF) and polyvinylpyrrolidone (PVP) polymer membranes prepared by phase inversion method. Initially, the nanofillers, viz, Zinc Oxide (ZnO) nanoparticle, Graphene Oxide-Zinc Oxide (GO-ZnO) nanocomposite were synthesized and then directly incorporated into PSF/PVP blend during the preparation of membranes. The prepared membranes have been subjected to FE-SEM, AFM, BET, contact angle, tensile test and anti-bacterial studies. Significant membrane morphologies and nanoporous properties have been observed by FE-SEM and BET, respectively. It has been observed that hydrophilicity, mechanical strength and water permeability of the ZnO and GO-ZnO incorporated membranes were enhanced than bare membrane. Antibacterial activity was assessed by measuring the inhibition zones formed around the membrane by disc-diffusion method using Escherichia coli (gram-negative) as a model bacterium. Again, it has been observed that nanofillers incorporated membrane exhibits high antibacterial performance compared to bare membrane.

Incorporating Feminism into Rehabilitation Counselor Education

Science.gov (United States)

Jeon, Mookyong

2015-01-01

Purpose: The author describes how rehabilitation counselor educators can incorporate the feminist perspective in teaching rehabilitation counselors-in-training by exploring history, core values, and training methods of feminism. Method: Based on a literature review, the author compares philosophy and concepts of rehabilitation counseling and…

Onondaga Noun Incorporation: Some Notes on the Interdependence of Syntax and Semantics

Science.gov (United States)

Woodbury, Hanni

1975-01-01

In Onondaga and all northern Iroquoian languages, nouns can be incorporated into verbs. The function of this is semantic as well as syntactic. It is semantic in that the sense of an incorporated noun will be narrower than its unincorporated counterpart regardless of modifiers. Incorporation changes the transformational structure of the sentence.…

[3H] Thymidine incorporation to estimate growth rates of anaerobic bacterial strains

International Nuclear Information System (INIS)

Winding, A.

1992-01-01

The incorporation of [ 3 H] thymidine by axenic cultures of anaerobic bacteria was investigated as a means to measure growth. The three fermentative strains and one of the methanogenic strains tested incorporated [ 3 H] thymidine during growth. It is concluded that the [ 3 H] thymidine incorporation method underestimates bacterial growth in anaerobic environments

Incorporating Indonesian Students' "Funds of Knowledge" into Teaching Science to Sustain Their Interest in Science

Directory of Open Access Journals (Sweden)

A.N. Md Zain

2011-12-01

Full Text Available The purpose of this study was to examine the effect of incorporating students’ funds of knowledge in the teaching of science in sustaining Indonesian students’ interest in science. The researchers employed mixed method approach in this study. This study took place within two suburban secondary schools in Indonesia. Two teachers and a total of 173 students (94 males and 79 females participated in this study. The findings revealed that initially, most students expected that the teaching process would mainly include science experiments or other hands-on activities. Their preferences revealed a critical problem related to science learning: a lack of meaningful science-related activities in the classroom. The findings showed that incorporating students’ funds of knowledge into science learning processes -and thus establishing students’ culture as an important and valued aspect of science learning was effective in not only sustaining but also improving students’ attitudes and increasing their interest in science.

A Collaborative Approach to Incorporating Statistics in the Physiology Classroom

Science.gov (United States)

Potterfield, April; Majerus, Mary

2008-01-01

Both the National Science Education Standards (NSES) and the National Council of Teachers of Mathematics (NCTM) recommend appropriately incorporating mathematics into other disciplines (NRC 1996; NRC 2003; NCTM 2000). With this in mind, an interdisciplinary, inquiry-based project was undertaken to incorporate mathematical analysis of data into a…

Studies on the incorporation of spent ion exchange resins from nuclear power plants into bitumen and cement

International Nuclear Information System (INIS)

Bonnevie-Svendsen, M.; Tallberg, K.; Aittola, P.; Tollbaeck, H.

1976-01-01

The joint Nordic incorporation experiments should provide technical data needed for the assessment of solidification techniques for wastes from nuclear reactors in the Nordic countries. Spent ion exchange resins are a main fraction of such wastes, and more knowledge about their incorporation is wanted. The effects of simulated and real ion exchange wastes on the quality of bitumen and cement incorporation products were studied. Blown and distilled bitumen and three Portland cement qualities were used. Product characterizations were based on properties relevant for safe waste management, storage, transport and disposal. The applicability and relevance of established and suggested tests is discussed. Up to 40-60% dry resin could be incorporated into bitumen without impairing product qualities. Products with higher resin contents were found to swell in contact with water. The products had a high leach resistance. Their form stability was improved by incorporated resins. Product qualities appeared to be less affected by physico-chemical variables than by mechanical process parameters. Pure resin-cement products tend to decompose in water. Product qualities were strongly affected by a variety of physico-chemical process parameters, and integer products were only obtained within narrow tolerance limits. Caesium was rapidly leached out. To attain integer products and improved leach resistance within technically acceptable tolerance limits it was necessary to utilize stabilizing and caesium-retaining additives such as Silix and vermiculite. Under the present conditions the water content of the resins limited the amounts that could be incorporated in 40-50wt% or about 70vol.% water-saturated (containing 20-40% dry) resin. (author)

Synthesis and characterization of Au incorporated Alq3 nanowires

Science.gov (United States)

Khan, Mohammad Bilal; Ahmad, Sultan; Parwaz, M.; Rahul, Khan, Zishan H.

2018-05-01

We report the synthesis and characterization of pure and Au incorporated Alq3 nanowires. These nanowires are synthesized using thermal vapor transport method. The luminescence intensity of Au incorporated Alq3 nanowires are recorded to be higher than that of pure Alq3 nanowires, which is found to increase with the increase in Au concentration. Fluorescence quenching is also observed when Au concentration is increased beyond the certain limit.

Conceptualising how SMEs incorporate green content in their websites

OpenAIRE

Craig M. Parker; Emilia Bellucci; Luba Torlina; Ambika Zutshi; Bardo Fraunholz

2014-01-01

This paper presents a framework on how Small and Medium Enterprises (SMEs) can proactively incorporate content relating to their ecological responsibility (or green) activities in their websites. SME studies offer limited guidance on, and conceptualisation of, how organisations can incorporate different types of content into their website designs. This paper addresses this problem by presenting the results of an exploratory, qualitative content analysis of Australian SME websites where emerge...

An approximation of herd effect due to vaccinating children against seasonal influenza – a potential solution to the incorporation of indirect effects into static models

Science.gov (United States)

2013-01-01

Background Indirect herd effect from vaccination of children offers potential for improving the effectiveness of influenza prevention in the remaining unvaccinated population. Static models used in cost-effectiveness analyses cannot dynamically capture herd effects. The objective of this study was to develop a methodology to allow herd effect associated with vaccinating children against seasonal influenza to be incorporated into static models evaluating the cost-effectiveness of influenza vaccination. Methods Two previously published linear equations for approximation of herd effects in general were compared with the results of a structured literature review undertaken using PubMed searches to identify data on herd effects specific to influenza vaccination. A linear function was fitted to point estimates from the literature using the sum of squared residuals. Results The literature review identified 21 publications on 20 studies for inclusion. Six studies provided data on a mathematical relationship between effective vaccine coverage in subgroups and reduction of influenza infection in a larger unvaccinated population. These supported a linear relationship when effective vaccine coverage in a subgroup population was between 20% and 80%. Three studies evaluating herd effect at a community level, specifically induced by vaccinating children, provided point estimates for fitting linear equations. The fitted linear equation for herd protection in the target population for vaccination (children) was slightly less conservative than a previously published equation for herd effects in general. The fitted linear equation for herd protection in the non-target population was considerably less conservative than the previously published equation. Conclusions This method of approximating herd effect requires simple adjustments to the annual baseline risk of influenza in static models: (1) for the age group targeted by the childhood vaccination strategy (i.e. children); and (2

An approximation of herd effect due to vaccinating children against seasonal influenza – a potential solution to the incorporation of indirect effects into static models

Directory of Open Access Journals (Sweden)

Van Vlaenderen Ilse

2013-01-01

Full Text Available Abstract Background Indirect herd effect from vaccination of children offers potential for improving the effectiveness of influenza prevention in the remaining unvaccinated population. Static models used in cost-effectiveness analyses cannot dynamically capture herd effects. The objective of this study was to develop a methodology to allow herd effect associated with vaccinating children against seasonal influenza to be incorporated into static models evaluating the cost-effectiveness of influenza vaccination. Methods Two previously published linear equations for approximation of herd effects in general were compared with the results of a structured literature review undertaken using PubMed searches to identify data on herd effects specific to influenza vaccination. A linear function was fitted to point estimates from the literature using the sum of squared residuals. Results The literature review identified 21 publications on 20 studies for inclusion. Six studies provided data on a mathematical relationship between effective vaccine coverage in subgroups and reduction of influenza infection in a larger unvaccinated population. These supported a linear relationship when effective vaccine coverage in a subgroup population was between 20% and 80%. Three studies evaluating herd effect at a community level, specifically induced by vaccinating children, provided point estimates for fitting linear equations. The fitted linear equation for herd protection in the target population for vaccination (children was slightly less conservative than a previously published equation for herd effects in general. The fitted linear equation for herd protection in the non-target population was considerably less conservative than the previously published equation. Conclusions This method of approximating herd effect requires simple adjustments to the annual baseline risk of influenza in static models: (1 for the age group targeted by the childhood vaccination strategy

Antibacterial Capability, Physicochemical Properties, and Biocompatibility of nTiO2 Incorporated Polymeric Scaffolds

Directory of Open Access Journals (Sweden)

Cijun Shuai

2018-03-01

Full Text Available Postoperative infection is a common risk which brings about failure in bone transplantation. In this study, nano titanium dioxide (nTiO2 was incorporated into Polyetheretherketone/polyglycolicacid (PEEK/PGA blends to construct antibacterial scaffolds via selective laser sintering. Antibacterial capability was assessed using Escherichia coli (E. coli and Staphylococcus aureus (S. aureus. The results demonstrated that the scaffolds with nTiO2 presented an effective antibacterial activity, which might be attributed to that nTiO2 would do the mechanical and oxidative damage to bacteria by occurring contact actions and generating reactive oxygen species (ROS, and thus killed bacteria from structure and function. Moreover, nTiO2 could enhance the tensile strength and modulus of scaffolds due to the reinforcing effect and its uniform disperse. And the cell culture experiments showed that nTiO2 stimulated cellular attachment and proliferation. Besides, it also elevated the hydrophily and thermal stability of scaffolds. These results suggested that the polymeric scaffolds incorporated nTiO2 had potential application in bone tissue engineering.

Modifying influence of incorporated 137Cs upon the mechanisms of adrenergic control over contractile myucard function

International Nuclear Information System (INIS)

Lobanok, L.M.; Bulanova, K.Ya.; Gerasimovich, N.V.; Sineleva, M.V.; Milyutin, A.A.

1994-01-01

Incorporated 137 Cs (absorbed dose of 0.26 Gy) causes decrease of myocard's contractile function and intropic response to β-adrenagonists effect, isoproterenol-stimulated adenylate cyclase activity and β-adrenoreceptors affinity. Adrenergic effects, mediated by α-adrenergic structures on heart contractile function, on the contrary, become stronger, that is due to the increase of the receptors' dencity on sarcolemma surface

Semiconducting compounds and devices incorporating same

Science.gov (United States)

Marks, Tobin J.; Facchetti, Antonio; Boudreault, Pierre-Luc; Miyauchi, Hiroyuki

2016-01-19

Disclosed are molecular and polymeric compounds having desirable properties as semiconducting materials. Such compounds can exhibit desirable electronic properties and possess processing advantages including solution-processability and/or good stability. Organic transistor and photovoltaic devices incorporating the present compounds as the active layer exhibit good device performance.

Applying and incorporating user driven innovation when designing concepts

DEFF Research Database (Denmark)

Thorp Hansen, Claus; Brønnum, Louise

This paper addresses the difficulties seen when working within the user driven innovation [UDI] paradigm. We examine some of the circumstances that often make it difficult to work with user insights in concept design. UDI has become a recognized design approach, but has not yet accommodated...... a design practice explicitly considering the type of user insights this approach implies. For that reason UDI has yet to prove itself and its potential effect; a study of Danish initiative “program for user driven innovation” has shown little effect in this regard. However it has shown that radical new...... insights have been produced but at the same time to abstract when integrated in the design process. We will discuss and propose a framework for working with user insights in concept design, based on existing concept frameworks but actively addressing and incorporating user insights as a new type of input...

Influence of aluminium incorporation on the structure of ZrN films deposited at low temperatures

International Nuclear Information System (INIS)

Araiza, J J; Sanchez, O

2009-01-01

We have studied the influence of Al incorporation in the crystalline structure of ZrN thin films deposited by dc magnetron sputtering at low temperature. The amount of aluminium in the films depends directly on the power applied to the aluminium cathode during the deposition. Energy dispersive x-ray analysis and x-ray diffraction (XRD) were used to obtain the chemical composition and crystalline structure of the films, respectively. When Al atoms are incorporated into the ZrN coatings, the strong ZrN (2 0 0) orientation is modified by a combination of other ones such as ZrN (1 1 1), Zr 3 N 4 (2 1 1) and hexagonal AlN (1 0 0) as detected from the XRD spectra for high aluminium concentrations. Fourier-transform infrared spectroscopy allowed us to identify oxides and nitrides, ZrO, AlO and AlN, incorporated into the deposited films. The effect of a bias voltage applied to the substrate has also been investigated and related to the changes in the microstructure and in the nanohardness values of the ZrAlN films.

Synbiotic yogurt-ice cream produced via incorporation of microencapsulated lactobacillus acidophilus (la-5) and fructooligosaccharide.

Science.gov (United States)

Ahmadi, Abbas; Milani, Elnaz; Madadlou, Ashkan; Mortazavi, Seyed Ali; Mokarram, Reza Rezaei; Salarbashi, Davoud

2014-08-01

Yogurt-ice cream is a nutritious product with a refreshing taste and durability profoundly longer than that of yogurt. The probiotic Lactobacillus acidophilus (La-5) cells either in free or encapsulated form were incorporated into yog-ice cream and their survivability were studied. Fructooligosaccharide (FOS) as a prebiotic compound at three levels (0, 4 & 8 % w/w) was added to yogurt-ice cream mix and its effects on some chemical properties, overrun and firmness of product were evaluated. The higher the incorporated FOS concentration, the lower were the pH value and higher the total solid content of treatments. FOS incorporation (8 %) significantly increased the overrun of treatments and reduced their firmness. The viable counts of free probiotics decreased from ~9.55 to ~7.3 log cfu/g after 60 days of frozen storage while that of encapsulated cells merely decreased less than 1 log cycle. Encapsulation with alginate microbeads protected the probiotic cells against injuries in the freezing stage as well as, during frozen storage.

Comparison of selenophene and thienothiophene incorporation into pentacyclic lactam-based conjugated polymers for organic solar cells

KAUST Repository

Kroon, Renee; Melianas, Armantas; Zhuang, Wenliu; Bergqvist, Jonas; Diaz De Zerio Mendaza, Amaia; Steckler, Timothy T.; Yu, Liyang; Bradley, Siobhan J.; Musumeci, Chiara; Gedefaw, Desta; Nann, Thomas; Amassian, Aram; Mü ller, Christian; Inganä s, Olle; Andersson, Mats R.

2015-01-01

In this work, we compare the effect of incorporating selenophene versus thienothiophene spacers into pentacyclic lactam-based conjugated polymers for organic solar cells. The two cyclic lactam-based copolymers were obtained via a new synthetic method for the lactam moiety. Selenophene incorporation results in a broader and red-shifted optical absorption while retaining a deep highest occupied molecular orbital level, whereas thienothienophene incorporation results in a blue-shifted optical absorption. Additionally, grazing-incidence wide angle X-ray scattering data indicates edge- and face-on solid state order for the selenophene-based polymer as compared to the thienothiophene-based polymer, which orders predominantly edge-on with respect to the substrate. In polymer:PCBM bulk heterojunction solar cells both materials show a similar open-circuit voltage of ∼0.80-0.84 V, however the selenophene-based polymer displays a higher fill factor of ∼0.70 vs. ∼0.65. This is due to the partial face-on backbone orientation of the selenophene-based polymer, leading to a higher hole mobility, as confirmed by single-carrier diode measurements, and a concomitantly higher fill factor. Combined with improved spectral coverage of the selenophene-based polymer, as confirmed by quantum efficiency experiments, it offers a larger short-circuit current density of ∼12 mA cm. Despite the relatively low molecular weight of both materials, a very robust power conversion efficiency ∼7% is achieved for the selenophene-based polymer, while the thienothiophene-based polymer demonstrates only a moderate maximum PCE of ∼5.5%. Hence, the favorable effects of selenophene incorporation on the photovoltaic performance of pentacyclic lactam-based conjugated polymers are clearly demonstrated.

Comparison of selenophene and thienothiophene incorporation into pentacyclic lactam-based conjugated polymers for organic solar cells

KAUST Repository

Kroon, Renee

2015-09-08

In this work, we compare the effect of incorporating selenophene versus thienothiophene spacers into pentacyclic lactam-based conjugated polymers for organic solar cells. The two cyclic lactam-based copolymers were obtained via a new synthetic method for the lactam moiety. Selenophene incorporation results in a broader and red-shifted optical absorption while retaining a deep highest occupied molecular orbital level, whereas thienothienophene incorporation results in a blue-shifted optical absorption. Additionally, grazing-incidence wide angle X-ray scattering data indicates edge- and face-on solid state order for the selenophene-based polymer as compared to the thienothiophene-based polymer, which orders predominantly edge-on with respect to the substrate. In polymer:PCBM bulk heterojunction solar cells both materials show a similar open-circuit voltage of ∼0.80-0.84 V, however the selenophene-based polymer displays a higher fill factor of ∼0.70 vs. ∼0.65. This is due to the partial face-on backbone orientation of the selenophene-based polymer, leading to a higher hole mobility, as confirmed by single-carrier diode measurements, and a concomitantly higher fill factor. Combined with improved spectral coverage of the selenophene-based polymer, as confirmed by quantum efficiency experiments, it offers a larger short-circuit current density of ∼12 mA cm. Despite the relatively low molecular weight of both materials, a very robust power conversion efficiency ∼7% is achieved for the selenophene-based polymer, while the thienothiophene-based polymer demonstrates only a moderate maximum PCE of ∼5.5%. Hence, the favorable effects of selenophene incorporation on the photovoltaic performance of pentacyclic lactam-based conjugated polymers are clearly demonstrated.

Mutagenic effect of radionuclides incorporated into DNA of Drosophila melanogaster. Progress report, December 15, 1982-July 15, 1983

International Nuclear Information System (INIS)

Lee, W.R.

1983-01-01

The molecular changes in DNA of mutations induced at the well-defined locus alcohol dehydrogenase (Adh) in Drosophila melanogaster were compared between null mutants induced by x-rays, the alkylating agent N-ethyl-N-nitrosourea (ENU) and decay of tritium incorporated into specific sites of DNA

THE INCORPORATION OF RADIOACTIVITY FROM GLYCINE-C$sup 14$ BY MAMMALIAN SPERMATOZOA

Energy Technology Data Exchange (ETDEWEB)

Graves, C. N.

1962-05-15

The metabolic pathways of glycine incorporation were investigated by biochemical and radibautographic methods. Results show that glycine is utilized hy bovine spermatoza and is incorporated into all fractions of the sperm cell. Incorporation into the nucleic acid fraction and especially into thymine indicates that there is a turnover in the desoxyribenucleic acid during storage of bovine spermatoza. (C.H.)

Controlled nitrogen incorporation in GaNSb alloys

Directory of Open Access Journals (Sweden)

M. J. Ashwin

2011-09-01

Full Text Available The incorporation of N in molecular-beam epitaxy of GaNxSb1−x alloys with x ⩽ 0.022 has been investigated as a function of temperature (325–400°C and growth rate 0.25–1.6 μmh−1. At fixed growth rate, the incorporated N fraction increases as the temperature is reduced until a maximum N content for the particular growth rate reached. At each temperature, there is a range of growth rates over which the N content is inversely proportional to the growth rate; the results are understood in terms of a kinetic model. The systematic growth rate- and temperature-dependence enables the N content and resulting band gap to be controlled.

Fluorine incorporation during Si solid phase epitaxy

International Nuclear Information System (INIS)

Impellizzeri, G.; Mirabella, S.; Romano, L.; Napolitani, E.; Carnera, A.; Grimaldi, M.G.; Priolo, F.

2006-01-01

We have investigated the F incorporation and segregation in preamorphized Si during solid phase epitaxy (SPE) at different temperatures and for several implanted-F energies and fluences. The Si samples were amorphized to a depth of 550 nm by implanting Si at liquid nitrogen temperature and then enriched with F at different energies (65-150 keV) and fluences (0.07-5 x 10 14 F/cm 2 ). Subsequently, the samples were regrown by SPE at different temperatures: 580, 700 and 800 deg. C. We have found that the amount of F incorporated after SPE strongly depends on the SPE temperature and on the energy and fluence of the implanted-F, opening the possibility to tailor the F profile during SPE

[Effects of biochar and nitrification inhibitor incorporation on global warming potential of a vegetable field in Nanjing, China].

Science.gov (United States)

Li, Bo; Li, Qiao-Ling; Fan, Chang-Hua; Sun, Li-Ying; Xiong, Zheng-Qin

2014-09-01

The influences of biochar and nitrification inhibitor incorporation on global warming potential (GWP) of a vegetable field were studied using the static chamber and gas chromatography method. Compared with the treatments without biochar addition, the annual GWP of N2O and CH4 and vegetable yield were increased by 8.7%-12.4% and 16.1%-52.5%, respectively, whereas the greenhouse gas intensity (GHGI) were decreased by 5.4%-28.7% following biochar amendment. Nitrification inhibitor significantly reduced the N2O emission while had little influence on CH4 emission, decreased GWP by 17.5%-20.6%, increased vegetable yield by 21.2%-40.1%, and decreased the GHGI significantly. The combined application of biochar and nitrification inhibitor significantly increased both vegetable yield and GWP, but to a greater extent for vegetable yield. Therefore, nitrification inhibitor incorporation could be served as an appropriate practice for increasing vegetable yield and mitigating GHG emissions in vegetable field.

Temperature-driven adaptation of the bacterial community in peat measured by using thymidine and leucine incorporation.

Science.gov (United States)

Ranneklev, S B; Bååth, E

2001-03-01

The temperature-driven adaptation of the bacterial community in peat was studied, by altering temperature to simulate self-heating and a subsequent return to mesophilic conditions. The technique used consisted of extracting the bacterial community from peat using homogenization-centrifugation and measuring the rates of thymidine (TdR) or leucine (Leu) incorporation by the extracted bacterial community at different temperatures. Increasing the peat incubation temperature from 25 degrees C to 35, 45, or 55 degrees C resulted in a selection of bacterial communities whose optimum temperatures for activity correlated to the peat incubation temperatures. Although TdR and Leu incorporations were significantly correlated, the Leu/TdR incorporation ratios were affected by temperature. Higher Leu/TdR incorporation ratios were found at higher temperatures of incubation of the extracted bacterial community. Higher Leu/TdR incorporation ratios were also found for bacteria in peat samples incubated at higher temperatures. The reappearance of the mesophilic community and disappearance of the thermophilic community when the incubation temperature of the peat was shifted down were monitored by measuring TdR incorporation at 55 degrees C (thermophilic activity) and 25 degrees C (mesophilic activity). Shifting the peat incubation temperature from 55 to 25 degrees C resulted in a recovery of the mesophilic activity, with a subsequent disappearance of the thermophilic activity. The availability of substrate for bacterial growth varied over time and among different peat samples. To avoid confounding effects of substrate availability, a temperature adaptation index was calculated. This index consisted of the log(10) ratio of TdR incorporation at 55 and 25 degrees C. The temperature index decreased linearly with time, indicating that no thermophilic activity would be detected by the TdR technique 1 month after the temperature downshift. There were no differences between the slopes of the

76 FR 28264 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing and...

Science.gov (United States)

2011-05-16

... Effectiveness of Proposed Rule Change Relating to the Strategy Fee Cap and Clarifications to the CBOE Fees... Chicago Board Options Exchange, Incorporated (``CBOE'' or ``Exchange'') proposes to amend its strategy fee... Statutory Basis for, the Proposed Rule Change 1. Purpose The Exchange currently caps market-maker and broker...

Reinforced cassava starch based edible film incorporated with essential oil and sodium bentonite nanoclay as food packaging material.

Science.gov (United States)

Iamareerat, Butsadee; Singh, Manisha; Sadiq, Muhammad Bilal; Anal, Anil Kumar

2018-05-01

Biodegradable packaging in food materials is a green technology based novel approach to replace the synthetic and conventional packaging systems. This study is aimed to formulate the biodegradable cassava starch based films incorporated with cinnamon essential oil and sodium bentonite clay nanoparticles. The films were characterized for their application as a packaging material for meatballs. The cassava starch films incorporated with sodium bentonite and cinnamon oil showed significant antibacterial potential against all test bacteria; Escherichia coli , Salmonella typhimurium and Staphylococcus aureus. Antibacterial effect of films increased significantly when the concentration of cinnamon oil was increased. The cassava starch film incorporated with 0.75% (w/w) sodium bentonite, 2% (w/w) glycerol and 2.5% (w/w) cinnamon oil was selected based on physical, mechanical and antibacterial potential to evaluate shelf life of meatballs. The meatballs stored at ambient temperature in cassava starch film incorporated with cinnamon oil and nanoclay, significantly inhibited the microbial growth till 96 h below the FDA limits (10 6  CFU/g) in foods compared to control films that exceeded above the limit within 48 h. Hence cassava starch based film incorporated with essential oils and clay nanoparticles can be an alternate approach as a packaging material for food industries to prolong the shelf life of products.

A survey on the quantitative incorporation organizational factors into PSA

International Nuclear Information System (INIS)

Park, S. Z.; Jea, M. S.; Ahn, N. S.

2002-01-01

The effects of organizational factors on the human performance and safety in nuclear power plants have been known through the results of research for several years. The organizational factor, which belongs to 11 elements of PSR (Periodic Safety Review), has been an important research area. In this study the state-of-the-art of qualitative and quantitative evaluation methodologies on organizational factors has been surveyed. The results of this study may contribute to developing a quantitative evaluation methodology on organizational factors as well as the basic research for conducting the PSR research, and for incorporating the quality of organization factors into PSA

Investigation of antibacterial activity of cotton fabric incorporating nano silver colloid

International Nuclear Information System (INIS)

Ngo Vo Ke Thanh; Nguyen Thi Phuong Phong

2009-01-01

In this work, silver nanoparticles were prepared by polyol process with microwave heating and incorporated on cotton fabric surfaces. The antibacterial performance of the antibacterial cotton fabric was tested for different concentration of nano-sized silver colloid, contact time germs, and washing times. It was found that antibacterial activity increased with the increasing concentration of nano-sized silver colloid. The antibacterial fabric with 758 mg/kg of silver nanoparticles on surface cotton was highly effective in killing test bacteria and had excellent water resisting property.

Ultrasound degradation of xanthan polymer in aqueous solution: Its scission mechanism and the effect of NaCl incorporation.

Science.gov (United States)

Saleh, H M; Annuar, M S M; Simarani, K

2017-11-01

Degradation of xanthan polymer in aqueous solution by ultrasonic irradiation was investigated. The effects of selected variables i.e. sonication intensity, irradiation time, concentration of xanthan gum and molar concentration of NaCl in solution were studied. Combined approach of full factorial design and conventional one-factor-at-a-time was applied to obtain optimum degradation at sonication power intensity of 11.5Wcm -2 , irradiation time 120min and 0.1gL -1 xanthan in a salt-free solution. Molecular weight reduction of xanthan gum under sonication was described by an exponential decay function with higher rate constant for polymer degradation in the salt free solution. The limiting molecular weight where fragments no longer undergo scission was determined from the function. The incorporation of NaCl in xanthan solution resulted in a lower limiting molecular weight. The ultrasound-mediated degradation of aqueous xanthan polymer chain agreed with a random scission model. Side chain of xanthan polymer is proposed to be the primary site of scission action. Copyright © 2017 Elsevier B.V. All rights reserved.

[Lethal effect after transmutation of 33P incorporated into bacteriophage S 13 and mechanisms of DNA double helix rupture].

Science.gov (United States)

Apelgot, S

1980-04-01

The experiments show the lethal effect of the beta decay of 33P incorporated in DNA of bacteriophage S 13. The lethal efficiency is high, 0.72 at 0 degrees C and 0.55 at--197 degrees C. The presence of a radical scavenger like AET has no influence. It was found previously that for such phages with single-stranded DNA, the lethal efficiency of 32P decay is unity, and that the lethal event is a DNA single-strand break, owing to the high energy of the nucleogenic 32S atom. As the recoil energy of the 33S atom is too low to account for such a break, it is suggested that the reorganization of the phosphate molecule into sulphate is able to bring about a DNA single-strand break with an efficiency as high as 0.7, at 0 degrees C. A model for the DNA double-strand-break produced by a transmutation processes is suggested.

Microbiological quality and other characteristics of refrigerated chicken meat in contact with cellulose acetate-based film incorporated with rosemary essential oil

Directory of Open Access Journals (Sweden)

Adriane Alexandre Machado de Melo

2012-12-01

Full Text Available Antimicrobial active packaging delays or inhibits microorganism growth in packed products, and it can be used in a variety of food systems. The objective of the present research was to develop packaging incorporated with natural antimicrobial agents (active film. The effects of the active film on the spoilage, pathogenic microorganism counts, pH and color of the refrigerated chicken breast cuts were analyzed. Cellulose acetate-based active films incorporating two concentrations (20% and 50%, v/w of rosemary (Rosmarinus officinalis L. essential oil were manufactured and placed in contact with the chicken breast cuts for six days. An analysis of variance and mean comparison tests (Tukey's test, p<0.05 were performed on the results. The films that contained 20% essential oil and were intercalated with chicken breast samples did not demonstrate significant effects on the control of psychrotrophic or total coliform microorganisms during the storage period; however, the films incorporated with 50% essential oil demonstrated efficacy toward the control of coliforms during the storage of the samples (6 days, 2 ± 2ºC. The pH was related to the psychrotrophic microorganism count and was not influenced by the treatment. The color was not influenced by the time of storage or the treatment. The results demonstrate that active films incorporating 50% rosemary essential oil are effective at controlling certain microorganisms in chicken breast cuts.

Between economic and legal analysis of incorporeal things: A critical

African Journals Online (AJOL)

The author uses practical economic examples to argue for the development of common law. The author identifies relevant Roman law principles which justify the legal nature of incorporeal things. It is demonstrated that the value of incorporeal things depends greatly on future circumstances. It is argued in this article that the ...

The biokinetic of incorporates radionuclides; Die Biokinetik von inkorporierten Radionukliden

Energy Technology Data Exchange (ETDEWEB)