WorldWideScience

Sample records for included petrographic analysis

  1. Petrographic drill cutting analysis

    Energy Technology Data Exchange (ETDEWEB)

    Thom, R. [Core Laboratories Canada Ltd., Calgary, AB (Canada)

    1999-11-01

    Some of the diagnostic tools which are available to determine valuable reservoir rock information from drill cuttings were described. For example, valuable information can be obtained from drill cuttings and petrographic thin sections regarding mineralogy, facies, pore systems, reservoir quality and fluid sensitivity. This paper described the best ways to pick representative drill cuttings from vials. Colour and texture are among the most important determining factors. New guidelines from the Alberta Energy and Utilities Board have made it possible to obtain thin sections from drill cuttings from a competitor`s wells. Up to 12 chips from each vial can be removed for thin section scanning electron microscopy (SEM) analysis. X-ray diffraction (XRD) analysis of drill chips is not recommended because it is usually not possible to obtain enough sample material. Another powerful tool to investigate and characterize pore systems is the Mercury Injection Capillary Pressure technique. This technique makes it possible to characterize the pore system and to determine pore throat size distribution, permeability/porosity, producible reserves, capillary pressure, effective versus non-effective porosity, irreducible water saturation, and height above free water. The most reliable and valuable information is obtained from sandstone and carbonate aggregate chips in which the pore system is preserved. It was also noted that core porosity can be empirically derived if a trend line is constructed using sections prepared from an equivalent cored zone. Permeability can be derived in much the same way. 9 figs.

  2. Utility of magnetic susceptibility values for the petrographic analysis of weathering crust basement samples

    Directory of Open Access Journals (Sweden)

    Alfredo Hernández-Ramsay

    2018-01-01

    Full Text Available This article exposes the resolving power of the magnetic susceptibility measurements in basement minerals samples of the lateritic weathering profile as an element of complementary analysis in the petrographic characterization of the rocks, and useful in the mapping of the magnetic heterogeneities of the basement. The comparison of the magnetic susceptibility data with the petrographic data of different samples revealed that even in samples that correspond to homogeneous lithotypes, great heterogeneities and differences can be manifested from the physical-mineralogical point of view. In general, a high concordance was observed between the intensity of the weathering processes in the rock samples, and the values of the magnetic susceptibility of such samples. The results support the possibility of extrapolating the composition information to samples with magnetic susceptibility measurements and without petrographic studies.

  3. Petrographic Analysis of Portland Cement Concrete Cores from Pease Air National Guard Base, New Hampshire

    Science.gov (United States)

    2016-11-01

    Petrographic Analysis of Portland Cement Concrete Cores from Pease Air National Guard Base, New Hampshire E n g in e e r R e s e a rc h a n d...coarse aggregate boundary, (c) crack in coarse aggregate into the paste, (d) view of cement and fine aggregate, with infilling of voids...infilling crack and voids, (d) view of cement and fine aggregate, with infilling of voids

  4. Mineralogical, chemical, and petrographic analysis of selected rock samples

    International Nuclear Information System (INIS)

    Roy, D.M.

    1976-01-01

    I. The majority of rocks examined from the NTS were found to be siltstones, varying from coarse into the very fine siltstone range, and containing > 60% quartz, usually much higher. Samples of the UEIL series of cores, in contrast, had a large clay mineral fraction, as well as some carbonate present. A few were intermediate silty claystones or argillites. Microphotographs are included to illustrate the variations in texture observed, while most of the data obtained are summarized in tabular form. II. Seven Michigan Salina evaporite specimens were analyzed

  5. Microfabric reconstruction via quantitative digital petrographic image analysis for weakly foliated gneisses

    Science.gov (United States)

    Yeh, Meng-Wan; Lin, Yu-Ling; Lee, Tung-Yi; Ji, Jian-Qing

    2013-03-01

    Detection and documentation of petro-structural features such as alignment features of minerals/grains, and extraction of such spatial property data are two fundamental steps for structural geology. Such tasks were mostly carried out manually. However, manual analysis is laborious and potentially biased. These drawbacks are less obvious when the foliation is well developed and the amount of platy mineral is higher. For samples with weakly developed foliation and low platy mineral content, automatic method is required for subjective interpretation. A semi-automatic computerized method of 3D foliation orientation reconstruction via two-dimensional petrographic-shape fabric analysis from serial oriented digital microphotograph has been developed and demonstrated in this study. The foliation is reconstructed by fitting a best fitting plane to the maximum modal peaks of micro textural parameters (SPO) for different mineral groups of platy and granular minerals from each thin section on a stereonet for four coarse grained biotite gneiss samples collected along the Jialie fault, SE Tibet, China. Regardless of platy or granular mineral aggregates, the reconstructed foliations showed similar orientation within 10° angular variation to the field measurement. The 10° angular variation can be maintained if the foliations are reconstructed by consecutive thin section groupings ≦ 50° angular intervals and a horizontal thin section. The angular spread increased to 30° for thin section groupings with > 50° to 100° angular intervals with a horizontal thin section. Major advantages of the computerized photometric methods demonstrated by this study are: the reduction of human prejudice and obtaining quantified and repeatable data sets.

  6. Petrographic and geochemical analysis of the Givetian-Frasnian sandstones in the Kuh-e-Tizi section, southeastern Central Iran

    Science.gov (United States)

    Hejazi, S. H.; Adabi, M. H.; Moussavi Harami, S. R.; Khosro Tehrani, K.

    2009-04-01

    The Givetian-Frasnian sandstones at the type section of Zarand Formation, sensu Wendt et al. (2002), unconformably overlie the Upper Cambrian Kuhbanan and underlie the Lower Carboniferous Hutk Formations respectively, in southeastern Central Iran. Petrographical data show that these sandstones are well-sorted and sub-angular to rounded grains quartzarenite. They are highly enriched in quartz, but poor in feldspar, lithic fragments and heavy minerals. Diagenetic features include physical and chemical compactions (straight, concavo-convex, sutured grain contacts and pressure solution of quartz grain), reduction of the pore space through rearrangements, and cementation (mostly silica, as quartz overgrowth). The provenance and tectonic setting of these sandstones have been interpreted using integrated petrographic and geochemical data. Petrographic analysis using standard methods (Basu et al., 1975; Dickinson et al., 1983) revealed that mono and poly-crystalline quartz grains have been derived from plutonic rocks of an interior cratonic setting. Elemental analysis and their ratios used for provenance studies (Th/Sc & La/Sc) which are similar to sediments derived from weathering of mostly felsic rocks (Amstrong-Altrin et al., 2004). Values representing chemical index of alteration (CIA) and the plagioclase index of alteration (PIA) range from 44.24 to 83.43, with an average of 69.96, and from 42.98 to 92.56, with an average of 75.8, respectively. However, most samples have values greater than 60, suggesting moderate to high weathering in the source area or during transportation prior to deposition. Major and trace element concentrations indicated a depositional setting in a passive continental margin, resembling those defined by Bhatia (1983), Bhatia & Crook (1986), Roser & Korsch (1986) and Kroonenberg (1994). Therefore, it can be concluded that these sandstones have been derived from stable cratonic setting. Refrences: Amstrong-Altrin, J.S., Lee, Y.I., Verma, S

  7. Us army corps of engineers - Engineering research and development center - Petrographic analysis of section 3 personnel tunnel concrete

    Energy Technology Data Exchange (ETDEWEB)

    Carter, J. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-10-04

    The Concrete and Materials Branch (CMB) of the Geotechnical and Structures Laboratory was requested to perform an analysis on concrete cores collected from the north and south walls of the H-Canyon Section 3 Personnel Tunel, Savannah River Site, Aiken, South Carolina to determine the cause of the lower than expected compressive strength. This study examined five cores provided to the ERDC by the Department of Energy. The cores were logged in as CMB No. 170051-1 to 170051-5 and subjected to petrographic examination, air void analysis, chemical sprays, scanning electron microscopy, and x-ray diffraction.

  8. Textural properties of chars as determined by petrographic analysis: comparison between air-blown, oxygen-blown and oxygen-enriched gasification

    CSIR Research Space (South Africa)

    Oboirien, BO

    2012-11-01

    Full Text Available In this study, the textural properties of chars generated from a vitrinite, high ash coal in a fluidised bed gasifier under air-blown, oxygen-blown and oxygen-enriched conditions were determined by detailed petrographic analysis. The char samples...

  9. Cathodoluminescence microscopy and petrographic image analysis of aggregates in concrete pavements affected by alkali–silica reaction

    International Nuclear Information System (INIS)

    Šťastná, A.; Šachlová, Š.; Pertold, Z.; Přikryl, R.; Leichmann, J.

    2012-01-01

    Various microscopic techniques (cathodoluminescence, polarizing and electron microscopy) were combined with image analysis with the aim to determine a) the modal composition and degradation features within concrete, and b) the petrographic characteristics and the geological types (rocks, and their provenance) of the aggregates. Concrete samples were taken from five different portions of Highway Nos. D1, D11, and D5 (the Czech Republic). Coarse and fine aggregates were found to be primarily composed of volcanic, plutonic, metamorphic and sedimentary rocks, as well as of quartz and feldspar aggregates of variable origins. The alkali–silica reaction was observed to be the main degradation mechanism, based upon the presence of microcracks and alkali–silica gels in the concrete. Use of cathodoluminescence enabled the identification of the source materials of the quartz aggregates, based upon their CL characteristics (i.e., color, intensity, microfractures, deformation, and zoning), which is difficult to distinguish only employing polarizing and electron microscopy. - Highlights: ► ASR in concrete pavements on the Highways Nos. D1, D5 and D11 (Czech Republic). ► Cathodoluminescence was combined with various microscopic techniques and image analysis. ► ASR was attributed to aggregates. ► Source materials of aggregates were identified based on cathodoluminescence characteristics. ► Quartz comes from different volcanic, plutonic and metamorphic parent rocks.

  10. PETROGRAPHIC ANALYSIS OF TRACE FOSSIL DESMOGRAPTON FUCHS, 1895 FROM THE MIOCENE OF NORTHERN APENNINES (ITALY: A METHODOLOGY TO DETECT HYPICHNIAL FEATURES AND IMPLICATIONS ON THE GRAPHOGLYPTID ETHOLOGY

    Directory of Open Access Journals (Sweden)

    ALESSIO CHECCONI

    2013-03-01

    Full Text Available The trace fossil Desmograpton Fuchs, 1895, as many other graphoglyptids, has been considered to be a typical pre-turbidite, three-dimensional burrow system formed in mud and preserved as a casting at the sole of turbidites. This classic interpretation was mostly based on hypichnial preservation, due to the lack of direct evidence (e.g. modern seafloor pictures for pre-depositional or post-depositional origin. Due to the accidental series of processes invoked to explain the perfect hypichnial preservation of this delicate trace fossil, several doubts and questions have been raised. To try to clarify the sedimentary processed that lead this trace fossil to be preserved, 26 thin sections of Desmograpton dertonensis Sacco, 1888 and Desmograpton ichthyforme Macsotay, 1967 have been performed at sand/clay interface of thin-bedded sandstone turbidites in the Miocene marl deposits of Verghereto, Northern Apennines (Italy. Petrographic analysis of textures and grains of the burrow-filling sediments points out that most of the grains of burrows differ from those of overlying sand, being either more or less sorted and differ in composition and locally also in grain size. Burrows are occasionally characterised by an upper rim, more or less thick, enriched in glauconite, phosphates, pyrite or quartz. Axial cuts of the strings show that rim was involved in diagenetic compaction, squeezing and fluid migration modifying the original shape of the trace fossil. In pre-depositional conditions the oblique-oriented filling is the only explication to preserve the upper rim of original mud, while compaction produced asymmetry in hypichnial tunnels. This petrographic approach, performed for the first time on this graphoglyptid genus, also elucidates the complex interaction of several taphonomic processes that led to the preservation of Desmograpton. The application of a similar petrographic approach to other graphoglyptids could help to better understand their origin

  11. Petrographic and Geochemical Characterization of Ore-Bearing Intrusions of the Noril'sk type, Siberia; With Discussion of Their Origin, Including Additional Datasets and Core Logs

    Science.gov (United States)

    Czamanske, Gerald K.

    2002-01-01

    The Noril'sk I, Talnakh, and Kharaelakh intrusions of the Noril'sk district host one of the outstanding metal concentrations in the world; contained Cu-Ni resources are comparable to the deposits at Sudbury, Ontario and the platinum group element (PGE) resource is second only to that of the Bushveld Complex. Our opportunity to cooperatively sample and study this district in Siberian Russia arose in 1990 through a memorandum of understanding between the U.S. Geological Survey and the former Ministry of Geology of the U.S.S.R. The world-class significance of these deposits and the possibility that understanding their geologic context, including construction of a credible 'ore-deposit model,' will lead to discovery of similar deposits elsewhere, inspired extensive studies of the ores, the mafic-intrusions which host them, and associated flood basalts.

  12. Petrographical properties of shales from Campos Basin

    Energy Technology Data Exchange (ETDEWEB)

    Rabe, Claudio; Araujo, Ewerton M.P.; Fontoura, Sergio A.B. da [Pontificia Univ. Catolica do Rio de Janeiro, RJ (Brazil). Dept. de Engenharia Civil. Grupo de Tecnologia e Engenharia de Petroleo (GTEP)

    2004-07-01

    This paper presents a petrographical characterization of shales from Albacora, Marlim and Marlim Sul fields (offshore Campos Basin, Brazil). The characterization program included petrography analysis of thin section of undisturbed shale samples, scanning electron microscope (SEM) images and energy dispersive spectrometry (EDS) analysis. The tests were realized with the purpose of obtaining information to observe the nature of the rock microstructure. From the results presented herein, the shales can be described as silty and calciferous. The description of the thin sections indicated that all the shale samples are very similar from the compositional and textural point of view. The samples are rich in clay minerals, that show small size grains and seem homogeneous, and carbonatic cement. The samples are constituted by calcite, quartz, kaolinite, smecite, illite, illite/smectite, kaolinite/illite/smectite, feldspar, plagioclase, dolomite, chlorite and pyrite. The samples showed a great amount of calcium, resultant from the microfossils, that covers partially the clay minerals. Pyrite is also observed as small grains disperse throughout the sample with form of agglomerated pyrite framboids, cubo-octahedral and octahedral crystals. The EDS show the presence of picks of Si, Al, Mg, K and Na particles, indicating the presence of clay minerals, calcite, pyrite and chlorite. (author)

  13. Using artificial intelligence to predict permeability from petrographic data

    Energy Technology Data Exchange (ETDEWEB)

    Maqsood Ali; Adwait Chawathe [New Mexico Petroleum Recovery Research Centre (Mexico)

    2000-10-01

    Petrographic data collected during thin section analysis can be invaluable for understanding the factors that control permeability distribution. Reliable prediction of permeability is important for reservoir characterization. The petrographic elements (mineralogy, porosity types, cements and clays, and pore morphology) interact with each other uniquely to generate a specific permeability distribution. It is difficult to quantify accurately this interaction and its consequent effect on permeability, emphasizing the non-linear nature of the process. To capture these non-linear interactions, neural networks were used to predict permeability from petrographic data. The neural net was used as a multivariate correlative tool because of its ability to learn the non-linear relationships between multiple input and output variables. The study was conducted on the upper Queen formation called the Shattuck Member (Permian age). The Shattuck Member is composed of very fine-grained arkosic sandstone. The core samples were available from the Sulimar Queen and South Lucky Lake fields located in Chaves County, New Mexico. Nineteen petrographic elements were collected for each permeability value using a combined minipermeameter-petrographic technique. In order to reduce noise and overfitting the permeability model, these petrographic elements were screened, and their control (ranking) with respect to permeability was determined using fuzzy logic. Since the fuzzy logic algorithm provides unbiased ranking, it was used to reduce the dimensionality of the input variables. Based on the fuzzy logic ranking, only the most influential petrographic elements were selected as inputs for permeability prediction. The neural net was trained and tested using data from Well 1-16 in the Sulimar Queen field. Relying on the ranking obtained from the fuzzy logic analysis, the net was trained using the most influential three, five, and ten petrographic elements. A fast algorithm (the scaled conjugate

  14. Petrographic and biomarker analysis of xylite-rich coal from the Kolubara and Kostolac lignite basins (Pannonian Basin, Serbia)

    Science.gov (United States)

    Đoković, Nataša; Mitrović, Danica; Životić, Dragana; Bechtel, Achim; Sachsenhofer, Reinhard F.; Stojanović, Ksenija

    2018-02-01

    The maceral and biomarker characteristics of 4 sublithotypes of xylite-rich coal (SXCs), pale yellow, dark yellow, brown and black, originating from the Kolubara and Kostolac lignite basins were determined. Based on these results, differences in sources and changes of organic matter (OM) resulting in formation of 4 SXCs were established. Conifers (particularly Cupressaceae, Taxodiaceae and Pinacea) had a significant impact on the precursor OM of all SXCs. The contribution of gymnosperm vs. angiosperm vegetation decreased in order pale yellow SXC>dark yellow SXC>brown SXC>black SXC. The distribution of non-hopanoid triterpenoids indicates that change of SXC colour from yellow to black is associated with reduced input of angiosperm plants from the Betulacea family. Differences in hopane distribution, bitumen content, proportion of short-chain n-alkanes and degree of aromatization of di- and triterpenoids of pale yellow SXC are controlled by microbial communities which took part in the diagenetic alteration of OM. The content of total huminites increased from black to pale yellow SXC, whereas contents of total liptinite and inertinite macerals showed the opposite trend. SXCs differ according to textinite/ulminite ratio, which sharply decreased from pale yellow to black SXC, reflecting increase in gelification of woody tissue. Regarding the composition of liptinite macerals, the SXCs mostly differ according to resinite/liptodetrinite and resinite/suberinite ratios, which are higher in yellow than in brown and black SXC. This result along with values of TOC/N ratio and Carbon Preference Index indicate that the contribution of well preserved woody material, including lignin tissue vs. the impact of epicuticular waxes decreased from yellow to black SXC.

  15. Geological analysis and petrographic training Tarata in careers (Upper Paleozoic)-test paleoclimatic interpretation in the light of the glacial episode devono-carboniferous (Arlit region, northern Niger)

    International Nuclear Information System (INIS)

    El Hamet, Mai Ousmane

    1983-01-01

    I - Lower Carboniferous glacial Designed west of the Air (northern Niger), it consists mainly of coarse sandstone with few pebbles scattered or polygenic conglomerate matrix abundant silty-clay sandstone. The ice structures, such as eskers, kames and Pingo are very well represented, but are smaller. The glacial facies are characterized by rapid lateral variations and fall into a narrow submeridional. The small extension of these facies and the position of this region at about 50 degrees south latitude in the Carboniferous period Devono-lead to believe that these phenomena related to valley glaciers mountain, but not necessarily requiring very high altitude at this latitude. II - Formation of Tarat:1-Stratigraphy. The sedimentological and petrographic study of tarat in the quarries in the region SOMAIR Arlit shows that this training has three distinct lithostratigraphic units separated by erosive surfaces of discontinuities with a major tarat located between the middle and upper Tarat . Biostratigraphy made from pollen analysis and paleobotanical studies confirm that major lithologic discontinuity between the deposition of Lower Carboniferous and Upper Permian those with a gap in the Upper Carboniferous and Lower Permian, it will be specified by further studies.2-Paleoclimatology. The new observations in the same career and the existence of glacial phenomena mentioned above before submitting the formation of tarat, led to consider the latter assuming a palaeoenvironment periglacial hypothesis that, in light periglacial seems to reject. Indeed, many characters observed (solifluction, grooves and ridges possible, relatively fresh feldspar) can also be observed in temperate and cold at that time, the region was located approximately 40 degrees south latitude.3-Volcanism.The existence of volcanism contemporaneous with deposition of Tarat was highlighted on one hand with the study of elements vitroclastiques, other hand with the cluster analysis of zircon, the zirconium

  16. Integrated Geochemical-Petrographic Insights on Neoproterozoic Ocean Oxygenation

    Science.gov (United States)

    Hood, A.; Planavsky, N.; Wallace, M. W.; Wang, X.; Gueguen, B.

    2015-12-01

    Novel isotope systems have the potential to provide new insights into biogeochemical cycling in Earth's evolving oceans. However, much recent paleo-redox work has been done without extensive consideration of sample preservation or paleoenvironmental setting. Neoproterozoic reef complexes from South Australia provide a perfect setting to test geochemical redox proxies (e.g. uranium isotopes and trace metal chemistry) within a well-defined sedimentological and petrographic context. These reefs developed significant frameworks over ~1km of steep platform relief from the seafloor, and contain a variety of carbonate components including primary dolomite marine cements. Analysis of a variety of components within these reefs reveals significant variation in uranium isotope composition and trace metal chemistry between components, even within a single sample. Marine cements, which precipitated directly from seawater, have much lower contamination element concentrations (e.g. Al, Zr, Th) than depositional micrites, and appear to represent the best archive of ancient ocean conditions. These cements have high levels of Fe, Mn in shallow and deep reef facies (e.g. 2-3wt% Fe), but only Fe-oxide inclusions in peritidal settings. This distribution suggests ferruginous conditions under a surficial chemocline in this Neoproterozoic seawater. Uranium isotopes from pristine marine cements have relatively heavy values compared to modern seawater (median = -0.22 δ238U). These values are essentially unfractionated from riverine inputs, which we interpret as tracking extensive near quantitative low-T reduction of U(VI) to U(IV) by abundant soluble iron in seawater. Depositional components and late stage cements have a much lighter and more variable U isotope compositions (-0.71 to -0.08 δ238U). This work highlights the need for fundamental petrographic constraints on the preservation of depositional geochemical signatures in the future use and development of sedimentary redox proxies.

  17. Petrographic microscope investigation of mortar and ceramic technologies for the conservation of the built heritage

    Science.gov (United States)

    Pavia, S.; Caro, S.

    2007-07-01

    Polarised-light (or petrographic) microscopy has been widely applied to heritage materials to assess composition and diagnose damage. However, instead, this paper focuses on the petrographic investigation of brick and mortar technologies for the production of quality repair materials compatible with their adjacent fabrics. Furthermore, the paper relates production technologies to the physical properties of the materials fabricated, and thus their final quality and durability. According to Cesare Brandi´s theory of compatibility (the 20th century architect on whose work modern conservation theory and practice are largely based) existing historic materials should be replaced with their equivalent. This paper demonstrates that polarised-light microscopy provides data on the origin and nature of raw materials, and processing parameters such as blending, mixing, firing, calcination and slaking, and how these relate to the quality of the final product. In addition, this paper highlights the importance of production technologies as these directly impact the physical properties of the materials fabricated and thus determine their final quality and durability. In this context, the paper investigates mortar calcination and slaking, two important operations in the manufacture of building limes that govern the reactivity, shrinkage and water retention of a lime binder which will impact mortar's properties such as workability, plasticity and carbonation speed, and these in turn will determine the ease of execution, durability and strength of a lime mortar. Petrographic analysis also provides evidence of ceramic technology including identification of local or foreign production and processing parameters such as sieving, blending, mixing and firing. A petrographic study of the ceramic matrix coupled to the diagnosis of mineral phases formed during firing allows to quantify sintering and vitrification and thus determine firing temperatures. Finally, certain features of the raw

  18. Petrographic features, geochemical trends and mass balance ...

    African Journals Online (AJOL)

    Petrographic features, geochemical trends and mass balance computation, in relation to the evolution of anatectic migmatites in the granulite facies terrain of the Manalur area, Tamil Nadu, south India.

  19. Detailed petrographic-structural study of an outcrop of Crystalline Basement of Montevideo

    International Nuclear Information System (INIS)

    Pascale, A.; Oyhantçabal, P.

    2010-01-01

    Preliminary data analysis of detailed outcrop Punta Virgilo, located on the S E coast of the department of Montevideo are presented. The investigated outcrop includes gneisses, amphibolite s and several generations of pegmatite and aplite dikes of Paleoproterozoic metamorphic basement, plus a set of dikes emplaced lamprófido exhumed once the area. Petrographic and microstructural studies of metamorphic units allowed to determine the conditions of metamorphism and deformation temperature between 520-720 ° C and pressure between 2 and 6 kbar (depth of 10 to 23 km)

  20. Petrographical Characters of Some important host rocks in ...

    African Journals Online (AJOL)

    Petrographical study of various rocks types has been carried out in the present study area with the discovery of a new rock type- Crystalline algal Limestone. An attempt has been made to describe the petrographical characters of the following rock types encountered in the present study area. 1. Calc-granulite 2.

  1. LUTETIAN LIMESTONES IN THE PARIS REGION: PETROGRAPHIC AND COMPOSITIONAL EXAMINATION

    International Nuclear Information System (INIS)

    BLANC, A.; HOLMES, L.L.; HARBOTTLE, G.

    1998-01-01

    Stone for building and decorating monuments in the Paris Basin from antiquity to the present came from numerous quarries in the Lutetian limestone formations of the region. To identify specific-stone sources used for masonry and sculptures in these monuments, a team of geologists and archaeologists has investigated 300 quarries and collected 2,300 limestone samples for study in a collaborative effort by geologists and chemists. Petrographic and paleontologic examinations of thin sections enable geologists to distinguish the Tertiary Lutetian limestones from similar stone in Jurassic and Cretaceous strata. The methods of the geologist have been supplemented by those of the chemist whose compositional studies by neutron activation analysis can differentiate among the fine-grained upper Lutetian limestones extracted from specific ancient quarries

  2. LUTETIAN LIMESTONES IN THE PARIS REGION: PETROGRAPHIC AND COMPOSITIONAL EXAMINATION

    Energy Technology Data Exchange (ETDEWEB)

    BLANC,A.; HOLMES,L.L.; HARBOTTLE,G.

    1998-06-11

    Stone for building and decorating monuments in the Paris Basin from antiquity to the present came from numerous quarries in the Lutetian limestone formations of the region. To identify specific-stone sources used for masonry and sculptures in these monuments, a team of geologists and archaeologists has investigated 300 quarries and collected 2,300 limestone samples for study in a collaborative effort by geologists and chemists. Petrographic and paleontologic examinations of thin sections enable geologists to distinguish the Tertiary Lutetian limestones from similar stone in Jurassic and Cretaceous strata. The methods of the geologist have been supplemented by those of the chemist whose compositional studies by neutron activation analysis can differentiate among the fine-grained upper Lutetian limestones extracted from specific ancient quarries.

  3. Lutetian limestones in the Paris region: Petrographic and compositional examination

    Energy Technology Data Exchange (ETDEWEB)

    Blanc, A. [Lab. de Recherche des Monuments Historiques, Champs-sur-Marne (France); Holmes, L.L.; Harbottle, G. [Brookhaven National Lab., Upton, NY (United States). Chemistry Dept.

    1998-12-31

    Stone for building and decorating monuments in the Paris Basin from antiquity to the present came from numerous quarries in the Lutetian limestone formations of the region. To identify specific stone sources used for masonry and sculptures in these monuments, a team of geologists and archaeologists have investigated 300 quarries and collected 2,300 limestone samples for study in a collaborative effort by geologists and chemists. Petrographic and paleontologic examinations of thin sections enable geologists to distinguish the Tertiary Lutetian limestones from similar stone in Jurassic and Cretaceous strata. The methods of the geologist have been supplemented by those of the chemistry whose compositional studies by neutron activation analysis can differentiate among the fine-grained upper Lutetian limestones extracted from specific ancient quarries.

  4. Development and evaluation of an automated reflectance microscope system for the petrographic characterization of bituminous coals

    Energy Technology Data Exchange (ETDEWEB)

    Hoover, D. S.; Davis, A.

    1980-10-01

    The development of automated coal petrographic techniques will lessen the demands on skilled personnel to do routine work. This project is concerned with the development and successful testing of an instrument which will meet these needs. The fundamental differences in reflectance of the three primary maceral groups should enable their differentiation in an automated-reflectance frequency histogram (reflectogram). Consequently, reflected light photometry was chosen as the method for automating coal petrographic analysis. Three generations of an automated system (called Rapid Scan Versions I, II and III) were developed and evaluated for petrographic analysis. Their basic design was that of a reflected-light microscope photometer with an automatic stage, interfaced with a minicomputer. The hardware elements used in the Rapid Scan Version I limited the system's flexibility and presented problems with signal digitization and measurement precision. Rapid Scan Version II was designed to incorporate a new microscope photometer and computer system. A digital stepping stage was incorporated into the Rapid Scan Version III system. The precision of reflectance determination of this system was found to be +- 0.02 percent reflectance. The limiting factor in quantitative interpretation of Rapid Scan reflectograms is the resolution of reflectance populations of the individual maceral groups. Statistical testing indicated that reflectograms were highly reproducible, and a new computer program, PETAN, was written to interpret the curves for vitrinite reflectance parameters ad petrographic.

  5. Petrographic and optical cathodoluminescence study of detrital quartz

    African Journals Online (AJOL)

    Basange Formation had been investigated using integrated optical Cathodoluminescence and Petrographic characteristics approach. Results showed the presence, in abundance, of detrital quartz with characteristic dull red to violet CL colour and ...

  6. A petrographic study of Precambrian quartzites from Goa coast

    Digital Repository Service at National Institute of Oceanography (India)

    Wagle, B.G.; Rajamanickam, G.V.

    marks. From the petrographic studies, the present quartzites are classified as micaceous and sericitic arkosic wacke. The composition of earlier sandstones prior to the metamorphism is inferred as clayey sandstone arkosic wacke. The heavy minerals like...

  7. Relating coal oxidation and hydrophobicity: a petrographic approach

    CSIR Research Space (South Africa)

    Kruszewska, KJ

    1996-11-01

    Full Text Available Long-wave fluorescence relative intensity measurements and a vitrinite micro elasticity index were used to determine oxidation levels in a suite of artificially oxidized coals. These petrographic parameters were correlated with the agglomeration...

  8. Evaluating the Relationships Between NTNU/SINTEF Drillability Indices with Index Properties and Petrographic Data of Hard Igneous Rocks

    Science.gov (United States)

    Aligholi, Saeed; Lashkaripour, Gholam Reza; Ghafoori, Mohammad; Azali, Sadegh Tarigh

    2017-11-01

    Thorough and realistic performance predictions are among the main requisites for estimating excavation costs and time of the tunneling projects. Also, NTNU/SINTEF rock drillability indices, including the Drilling Rate Index™ (DRI), Bit Wear Index™ (BWI), and Cutter Life Index™ (CLI), are among the most effective indices for determining rock drillability. In this study, brittleness value (S20), Sievers' J-Value (SJ), abrasion value (AV), and Abrasion Value Cutter Steel (AVS) tests are conducted to determine these indices for a wide range of Iranian hard igneous rocks. In addition, relationships between such drillability parameters with petrographic features and index properties of the tested rocks are investigated. The results from multiple regression analysis revealed that the multiple regression models prepared using petrographic features provide a better estimation of drillability compared to those prepared using index properties. Also, it was found that the semiautomatic petrography and multiple regression analyses provide a suitable complement to determine drillability properties of igneous rocks. Based on the results of this study, AV has higher correlations with studied mineralogical indices than AVS. The results imply that, in general, rock surface hardness of hard igneous rocks is very high, and the acidic igneous rocks have a lower strength and density and higher S20 than those of basic rocks. Moreover, DRI is higher, while BWI is lower in acidic igneous rocks, suggesting that drill and blast tunneling is more convenient in these rocks than basic rocks.

  9. Relation between the petrographic composition of coal and the morphology of pyrolysis char produced in fluidized bed

    Energy Technology Data Exchange (ETDEWEB)

    B. Valentim; M.J. Lemos de Sousa; P. Abelha; D. Boavida; I. Gulyurtlu [Centro de Geologia da Universidade do Porto, Porto (Portugal)

    2004-06-01

    Several previous studies have already established, for pulverized coal combustion conditions, global correlations between petrographic composition of the coal and those of char produced from the same coal. However, for fluidized bed combustion, there has not been much new work since the eighties. The results presented in this paper include the petrographic characterization of seven different coals from several origins and also of their respective chars produced at 700, 800, 900, and 1000{sup o}C in a laboratory fluidized bed reactor. The results show a marked predominance of tenuispheres as the trial temperatures increase. While vitrinite-rich coals essentially produced highly porous chars, the inertinite-rich coals produced large amounts of medium- and low-porous chars. Semi-anthracite vitrinite produced high-porous chars and thermal affected coal particles originated low-porous and angular char morphotypes. The analysis of the data obtained revealed that vitrinite + liptinite related well with the high-porous char (sum of cenospheres and tenuinetworks), classified as Group 1. The same trend, but with a weaker relation, was also observed between vitrinite and liptinite rich microlithotypes and Group 1. 32 refs., 17 refs., 3 tabs.

  10. Why include phenomenological analysis in a Research Methods course?

    Science.gov (United States)

    Delgado, Ana R

    2013-01-01

    Guidelines for Spanish university curricula include the descriptor Quantitative and Qualitative Methods, but the latter are still poorly represented. To inform the argument for phenomenological methods, the last 20-year interval of ISI databases has been content-analyzed with the following codes: discourse analysis, grounded theory, narrative analysis, phenomenological analysis and confirmatory factor analysis, that is, four qualitative methods and a prototypical quantitative one. In absolute terms, the most frequent qualitative method is grounded theory, followed by discourse analysis, phenomenological analysis and narrative analysis. However, taking into account content categories, only phenomenological analysis shows a clear psychological profile, similar to confirmatory factor analysis. We recommend starting qualitative training with a method that does not require either big groups, or big funding, and that has a procedural core that is simple, relatively well-delimited and "secularizable," a variety of thematic analysis. Historical reasons and the clear psychological profile evidenced by our results enhance our argument to foster the inclusion of phenomenological analysis in research method courses in psychology.

  11. Petrographic and geochemical characterization and isotope analysis of U-PB (SHRIMP) in tuffaceous siltstone, Salitre formation, Sao Francisco supergroup, BA, Brazil; Caracterizacao petrografica, geoquimica e analises isotopicas U-PB (SRIMP) em siltito tufaceo, formacao Salitre Supergrupo Sao Francisco, Bahia

    Energy Technology Data Exchange (ETDEWEB)

    Santana, Ana; Chemale Junior, Farid, E-mail: ana.santana.geo@gmail.com [Universidade de Brasilia (UnB), DF (Brazil); Sherer, Claiton Marlon dos Santos [Universidade Federal do Rio Grande do Sul (UFRS), Porto Alegre, RS (Brazil)

    2015-07-01

    The Salitre Formation consists of neoproterozoic carbonate sequence overlying the Sao Francisco Craton (SFC) in Bahia. Data on the origin of such training are scarce, mainly due to their nature, essentially carbonate. In this study, from the petrographic characterization and geochemical thin levels of terrigenous, it was identified the contribution of volcanic material. Isotopic analysis of U-Pb, SHRIMP, indicate the existence of young grain, aged 669 ± 14 Ma (Cryogenian) - probable volcanism associated with the building of neoproterozoic mobile belts surrounding the SFC - and inherited zircons with the main population in the Paleoproterozoic and corresponding to the source area of the crystalline basement. Detrital zircons with ages between Statherian and Tonian have also been reported and have the source area the metasedimentary rocks of the Espinhaco Supergroup. (author)

  12. Rock Physics and Petrographic Parameters Relationship Within Siliciclastic Rocks: Quartz Sandstone Outcrop Study Case

    Science.gov (United States)

    Syafriyono, S.; Caesario, D.; Swastika, A.; Adlan, Q.; Syafri, I.; Abdurrokhim, A.; Mardiana, U.; Mohamad, F.; Alfadli, M. K.; Sari, V. M.

    2018-03-01

    Rock physical parameters value (Vp and Vs) is one of fundamental aspects in reservoir characterization as a tool to detect rock heterogenity. Its response is depend on several reservoir conditions such as lithology, pressure and reservoir fluids. The value of Vp and Vs is controlled by grain contact and contact stiffness, a function of clay mineral content and porosity also affected by mineral composition. The study about Vp and Vs response within sandstone and its relationship with petrographic parameters has become important to define anisotrophy of reservoir characteristics distribution and could give a better understanding about local diagenesis that influence clastic reservoir properties. Petrographic analysis and Vp-Vs calculation was carried out to 12 core sample which is obtained by hand-drilling of the outcrop in Sukabumi area, West Java as a part of Bayah Formation. Data processing and interpretation of sedimentary vertical succession showing that this outcrop comprises of 3 major sandstone layers indicating fluvial depositional environment. As stated before, there are 4 petrographic parameters (sorting, roundness, clay mineral content, and grain contact) which are responsible to the differences of shear wave and compressional wave value in this outcrop. Lithology with poor-sorted and well- roundness has Vp value lower than well-sorted and poor-roundness (sub-angular) grain. For the sample with high clay content, Vp value is ranging from 1681 to 2000 m/s and could be getting high until 2190 to 2714 m/s in low clay content sample even though the presence of clay minerals cannot be defined neither as matrix nor cement. The whole sample have suture grain contact indicating telogenesis regime whereas facies has no relationship with Vp and Vs value because of the different type of facies show similar petrographic parameters after diagenesis.

  13. A quantitative assessment of repeatability in the petrographic description of carbonate sediments

    Science.gov (United States)

    Junaibi, Mariam Al; Lokier, Stephen

    2014-05-01

    The Dunham classification, as modified by Embry and Klovan, is the most widely-applied classification scheme for the systematic description of carbonate sedimentary rocks. Yet, despite the fact that the divisions of this scheme are so clearly defined and well-established, ambiguities in the petrographic description of thin sections still occur. Many petroleum reservoir modelling systems employ rock-typing schemes heavily biased to the allocation of a rock unit to a specific category within the Dunham classification scheme. Consistency in application of the scheme is therefore imperative. This study investigates the consistency of use of the Dunham classification across academia and industry to assess reproducibility in the petrographic description of carbonate sediments. In order to control the petrographic parameters of the lithologies used in this study, we created a range of synthetic carbonate thin sections with known component ratios and a range of sedimentary textures spanning the Dunham classification scheme. Some of these textures were deliberately deigned to be ambiguous in nature. All samples were subjected to modal analysis in order to accurately constrain component ratios and sedimentary textures. Identical sets of blind-labelled samples were dispatched to volunteers in academia and industry. Volunteers were asked to describe the samples within the terms of the Dunham classification scheme and complete a questionnaire detailing their current employment position and academic background. The results of the completed surveys were tabulated and analysed in order to assess consistency and reproducibility in the petrographic description of carbonate rocks. Ambiguities were documented and analysed in order to constrain areas of uncertainty in the application of the Dunham classification. Based upon the findings of these data, clarifications to the Dunham classification scheme are proposed.

  14. ASR DIAGNOSIS BY PETROGRAPHIC INVESTIGATION AND EVALUATION OF MECHANICAL PERFORMANCE OF ASR DETERIORATED PRETENSIONED PC BEAM

    Science.gov (United States)

    Tomiyama, Jun; Yamada, Kazuo; Kaneda, Kazuo; Iraha, Shigeo; Oshiro, Takeshi

    ASR diagnosis and evaluation of load carrying capacity have been performed on the pre-tensioned PC beam which was cut out of a national high way bridge. The bridge was replaced lately after 25years service due to ASR deterioration. Comprehensive investigations such as crack measurement, material strength test, petrographic investigation, beam bending test have been performed on the deteriorated beam. Cracks have been observed on all sides and the appearance has been classified as severe deterioration grade. Petrographic investigation concluded that the reacted mineral was mainly reactive cristobalite contained in andesite of fine aggregates and EPMA investigation found that the reaction seemed to be the final stage. The late expansive ASR has been superimposed by cryptocrystalline quartz in coarse aggregates and it is still in progress. Deteriorated concrete cores with no visual crack have reduced only 10% of compressive strength compared with design strength, but significant loss has been observed on the elastic modulus. The static bending load test on the deteriorated test beam showed 95% of design load capacity indicating that the visual deterioration on surfaces has affected slight damages at this moment. But loss of bending rigidity has been appeared on the deteriorated beam .after bending cracks have started. This comprehensive study including the petrographic diagnosis and the appraisal on mechanical performance of the deteriorated beam conclude that there is a possibility of ASR deterioration in progress and further loss of mechanical performance though the beam had some margin for loading capacity at this moment.

  15. Petrographical, palynological, and sedimentological aspects regarding the genesis of Palaeogene lignites near Alexandroupolis, Thrace, Greece

    Energy Technology Data Exchange (ETDEWEB)

    Antoniadis, P.; Kaouras, G.; Khanaqa, P.; Riegel, W.; Gentzis, T. [CDX Canada Co, Calgary, AB (Canada)

    2006-01-21

    Several minor lignite deposits of Palaeogene (Eocene to Oligocene) age occur in the vicinity of Alexandroupolis, Thrace, northern Greece. A few, rather thin seams were mined in the past by small private operations for local use. Coal samples have been collected from old mine dumps and outcrops around abandoned mine posts to be studied by means of maceral analysis at high magnification. The groundwater and vegetation index are calculated from the maceral composition and used to draw conclusions concerning the environment of deposition. In addition, block samples of coal cut perpendicular to bedding were studied at intermediate magnification and underfluorescence, thus revealing some interesting bedding features as well as well-preserved plant organisms. The coals are characteristically finely laminated and highly gelified. Palynological preparations have thus far yielded only poorly preserved palynomorph assemblages, rather low in diversity and dominated by fern spores. This fern dominance is rather unusual: however, it is compatible with the occurrence of fertile fern fronds observed in petrographic coal sections. Accompanying clastic sediments exhibit cyclic fining-upward sequences at a scale averaging about 1 m in vertical extent. Grain sizes range from small gravel to clay and silt. In some cases, siltstones in the roof of coal seams include abundant plant fragments showing parallel venation. The evidence presented from various sources suggests a rather unstable fluvial environment and a generally high water table on the flood plain for the formation of these lignites.

  16. Petrographic Studies of Rocks from The Chesapeake Bay Impact ...

    African Journals Online (AJOL)

    ABSTRACT. Shock petrographic investigations were carried out on samples collected from drill cores from the Chesapeake Bay impact structure (USA). The late Eocene Chesapeake impact structure is, at. 85 km diameter, currently the largest impact structure known in the United States, buried at shallow to moderate depths ...

  17. Petrographic Studies of Rocks from The Chesapeake Bay Impact ...

    African Journals Online (AJOL)

    Shock petrographic investigations were carried out on samples collected from drill cores from the Chesapeake Bay impact structure (USA). The late Eocene Chesapeake impact structure is, at 85 km diameter, currently the largest impact structure known in the United States, buried at shallow to moderate depths beneath ...

  18. Petrographic studies and coking properties of Lamza, Chikila and ...

    African Journals Online (AJOL)

    Petrographic studies and coking properties of Lamza, Chikila and Lafia-Ori coals of the Benue trough. A Jauro, MO Agho, OJ Abayeh, NG Obaje, MB Abubakar. Abstract. No Abstract. Journal of Mining and Geology Vol. 44 (1) 2008: pp. 37-42. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT ...

  19. Stratified Sampling to Define Levels of Petrographic Variation in Coal Beds: Examples from Indonesia and New Zealand

    Directory of Open Access Journals (Sweden)

    Tim A. Moore

    2016-01-01

    Full Text Available DOI: 10.17014/ijog.3.1.29-51Stratified sampling of coal seams for petrographic analysis using block samples is a viable alternative to standard methods of channel sampling and particulate pellet mounts. Although petrographic analysis of particulate pellets is employed widely, it is both time consuming and does not allow variation within sampling units to be assessed - an important measure in any study whether it be for paleoenvironmental reconstruction or in obtaining estimates of industrial attributes. Also, samples taken as intact blocks provide additional information, such as texture and botanical affinity that cannot be gained using particulate pellets. Stratified sampling can be employed both on ‘fine’ and ‘coarse’ grained coal units. Fine-grained coals are defined as those coal intervals that do not contain vitrain bands greater than approximately 1 mm in thickness (as measured perpendicular to bedding. In fine-grained coal seams, a reasonable sized block sample (with a polished surface area of ~3 cm2 can be taken that encapsulates the macroscopic variability. However, for coarse-grained coals (vitrain bands >1 mm a different system has to be employed in order to accurately account for the larger particles. Macroscopic point counting of vitrain bands can accurately account for those particles>1 mm within a coal interval. This point counting method is conducted using something as simple as string on a coal face with marked intervals greater than the largest particle expected to be encountered (although new technologies are being developed to capture this type of information digitally. Comparative analyses of particulate pellets and blocks on the same interval show less than 6% variation between the two sample types when blocks are recalculated to include macroscopic counts of vitrain. Therefore even in coarse-grained coals, stratified sampling can be used effectively and representatively.

  20. Two-dimensional analysis of motion artifacts, including flow effects

    International Nuclear Information System (INIS)

    Litt, A.M.; Brody, A.S.; Spangler, R.A.; Scott, P.D.

    1990-01-01

    The effects of motion on magnetic resonance images have been theoretically analyzed for the case of a point-like object in simple harmonic motion and for other one-dimensional trajectories. The authors of this paper extend this analysis to a generalized two-dimensional magnetization with an arbitrary motion trajectory. The authors provide specific solutions for the clinically relevant cases of the cross-sections of cylindrical objects in the body, such as the aorta, which has a roughly one-dimensional, simple harmonic motion during respiration. By extending the solution to include inhomogeneous magnetizations, the authors present a model which allows the effects of motion artifacts and flow artifacts to be analyzed simultaneously

  1. Petrographic and Geochemical Analyses of Kirana Hills Shield Rocks around Sargodha and Economic Potential

    Directory of Open Access Journals (Sweden)

    Muhammad Waseem Khan

    2017-04-01

    Full Text Available The present study deals with geochemical and petrographic analysis of the Kirana Hill shield rocks of Punjab plains from Buland, Hachi, Shaheen Abad, Shaikh and Machh hills. On basis of the current studies certain modifications have been made in the classification and nomenclature of rocks exposed in the study areas. Chemical analyses have also been carried out in order to calculate Cross Iddings, Pirsson, and Washington (CIPW norms”, to strengthen nomenclature scheme and finally rocks are classified by using “MAGMA SOFTWARE”. Rhyolites predominate over the basalts/dolerites, andesites, and phyllite/ slate. Rhyolitic rocks are light grey, greenish grey and light brown in color, aphanitic in nature. The observed microscopic textures are aphyric, phyric or porphyritic and micropoikilitc. Moreover, some rhyolitic rocks also show flow texture. They are either cryptocrystalline to microcrystalline or microcrystalline to cryptocrystalline. No glassy material has been observed in any thin section. Mafic rocks are characterized by the presence of ferromagnesian minerals with plagioclase. Andesites exhibit mainly porphyritic texture, but aphyric texture has also been observed in few samples. Hydrothermal alterations are also very common in these rocks. Other rock assemblages identified during laboratory studies from Kirana area include: tuffs i.e. (Lithic Crystal Tuff and Lithic Tuff, basaltic andesite, rhyodacite/ dacite, slate/ phyllite, ankeritic rocks/ veins and quartzofeldspathic veins. Our studies also reveal that no evidence of quartzite has been found in the samples collected from above mentioned areas of Kirana, although it has been reported in previous literature. Iron (Fe has been observed in rhyolite as well as other volcanic rocks of Kirana hills, its presence suggests magma from deep mantle instead of crustal melting / anatexis. In the present analysis some primary and secondary copper minerals including chalcopyrite, atacamite and

  2. The petrographic district of Santa Teresa 1st. communication

    International Nuclear Information System (INIS)

    Giglio, M.; Oyhantcabal, P.

    1984-01-01

    Abstract.it was possible to found the existence of a potas sic rocks petrographic province as a first stage of the geological, petrographic and geochemical study of the Sta. Teresa granitic complex of cambric age.The Or/Ab/An ratio of most of this rocks lies on the orthoclase field of the 'Diagram of Higazy', while the K2/Na20tCaO ratio is bigger than 1 .This da tta are preliminary and the investigation needs to be continued.This inform is about the geological conditions study carried out in Paso Severino zone of the Santa Lucia small river to make a dam to provide water to Montevideo. The techniques used were photo interpretation and general geological studies.

  3. Petrographic and geochemic evaluation of equine enteroliths.

    Science.gov (United States)

    Hassel, D M; Schiffman, P S; Snyder, J R

    2001-03-01

    To characterize the texture, mineralogic features, and chemical features of enteroliths obtained from horses. Enteroliths from 13 horses with colic. Enteroliths were harvested from 13 horses that underwent ventral midline celiotomy for treatment of colic or necropsy because of colonic obstruction and rupture caused by enteroliths. Dietary and environmental history were determined via questionnaires or evaluation of medical records. In 7 horses that underwent surgical treatment for enterolithiasis, samples of colonic contents were obtained via an enterotomy in the pelvic flexure. Colonic concentrations of magnesium (Mg), phosphorus (P), sulfur (S), sodium (Na), calcium (Ca), and potassium (K) were determined. Enteroliths were analyzed via electron microprobe analysis and X-ray diffraction. Enteroliths varied widely regarding degree of porosity, presence and distribution of radiating texture, and composition and size of the central nidus. A distinct concentric banding was identifiable in all enteroliths. Struvite was the predominant component of all enteroliths, although Mg vivianite was identified in 5 enteroliths, and there were variable quantities of Na, S, K, and Ca in the struvite within enteroliths. Despite an abundance of Ca in colonic fluids, Mg-phosphate minerals were preferentially formed, compared with Ca-phosphates (apatite), in equine enteroliths. Enteroliths comprise 2 major Mg phosphates: struvite and Mg vivianite. There is wide variability in macrotexture and ionic concentrations between and within enteroliths.

  4. ESTUDIOS PETROGRÁFICOS Y DE CORTES DELGADOS PARA LA IDENTIFICACIÓN DE MATERIAS PRIMAS LÍTICAS EN EL SECTOR NORTE DEL VALLE DE HUALFÍN (CATAMARCA, ARGENTINA (Petrographic and Thin Section Analysis for the Identification of Raw Lithic Materials in the Northern Area of the Hualfín Valley (Catamarca, Argentina

    Directory of Open Access Journals (Sweden)

    Julieta Lynch

    2016-06-01

    Full Text Available El objetivo del siguiente trabajo se centra en el análisis macroscópico y en estudios petrográficos microscópicos realizados sobre materiales líticos arqueológicos recuperados de los sitios Villavil y Villavil 2 (Hualfín, Catamarca, Argentina. Los resultados obtenidos permitieron identificar las materias primas utilizadas en la manufactura de artefactos asociados a ocupaciones del periodo de Desarrollos Regionales/Inka (ca. 900 al 1400 d. C. y, en base a la información geológica de la zona, se realizaron observaciones acerca de su posible procedencia. Esto permitió discutir las hipótesis planteadas con anterioridad acerca de las prácticas relacionadas con su aprovisionamiento. ENGLISH: The main objective of this study is the macroscopic and microscopic petrographic analysis of lithic materials recovered from the sites of Villavil and Villavil 2 (Hualfín, Catamarca, Argentina. The results obtained from this analysis allowed for the identification of the raw materials used in the manufacture of artifacts associated with Regional Developments/Inka Period (ca. 900 to 1400 A.D. occupations. Based on regional geological information, we are able to posit the source locations of these raw materials. This allows for a discussion of previous hypotheses regarding practices of lithic procurement in the area.

  5. Celtiberian ceramic productions from the Central Iberian range (Spain): Chemical and petrographic characterization

    International Nuclear Information System (INIS)

    Igea, J.; Perez-Arantegup, J.; Lapuente, P.; Saiz, M. E.; Burillo, F.

    2013-01-01

    As part of an extended program on archaeometric research of the Celtiberian production centres situated along the Central Iberian Range, ceramic fragments of different vessel types from two selected Celtiberian workshops were analyzed: La Rodriga (Guadalajara, Spain) and Allueva II (Teruel, Spain), dated from the 3nd to the 2st centuries BC. The characterization was focused on the chemical analysis by Inductively Coupled Plasma-Mass Spectrometry, and subjected to commonlyused multivariate statistical methods to distinguish between ceramic materials and to discriminate among different compositional groups in each production centre. The analysis was completed by performing petrographic characterization, textural observations, colour measurement and mineralogical analysis of the pieces by means of XRD. The compositional variations from major, minor and trace elements allowed to establish two subgroups in La Rodriga and one ceramic group in Allueva II. The chemical composition differences were confirmed by the petrographic characteristics and the mineralogical composition of the ceramic fabrics. These results enabled us to complete the preliminary archaeometric study in order to improve the knowledge on cultural and commercial influences in this important Celtiberian territory. (Author) 22 refs.

  6. Line outage contingency analysis including the system islanding ...

    African Journals Online (AJOL)

    The optimally ordered sparse [Bʹ], [Bʺ] matrices for the integrated system are used for load flow analysis to determine modified values of voltage phase angles [d] and bus voltages [V] to determine the over loading effect on the remaining lines due to outage of a selected line outage contingency. In case of over loading in ...

  7. Tools for voltage stability analysis, including a probabilistic approach

    Energy Technology Data Exchange (ETDEWEB)

    Vieira Filho, X.; Martins, N.; Bianco, A.; Pinto, H.J.C.P. [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil); Pereira, M.V.F. [Power System Research (PSR), Inc., Rio de Janeiro, RJ (Brazil); Gomes, P.; Santos, M.G. dos [ELETROBRAS, Rio de Janeiro, RJ (Brazil)

    1994-12-31

    This paper reviews some voltage stability analysis tools that are being used or envisioned for expansion and operational planning studies in the Brazilian system, as well as, their applications. The paper also shows that deterministic tools can be linked together in a probabilistic framework, so as to provide complementary help to the analyst in choosing the most adequate operation strategies, or the best planning solutions for a given system. (author) 43 refs., 8 figs., 8 tabs.

  8. Corpus analysis and automatic detection of emotion-including keywords

    Science.gov (United States)

    Yuan, Bo; He, Xiangqing; Liu, Ying

    2013-12-01

    Emotion words play a vital role in many sentiment analysis tasks. Previous research uses sentiment dictionary to detect the subjectivity or polarity of words. In this paper, we dive into Emotion-Inducing Keywords (EIK), which refers to the words in use that convey emotion. We first analyze an emotion corpus to explore the pragmatic aspects of EIK. Then we design an effective framework for automatically detecting EIK in sentences by utilizing linguistic features and context information. Our system outperforms traditional dictionary-based methods dramatically in increasing Precision, Recall and F1-score.

  9. Line outage contingency analysis including the system islanding scenario

    Energy Technology Data Exchange (ETDEWEB)

    Hazarika, D.; Bhuyan, S. [Assam Engineering College, Jalukbari, Guwahati 781013 (India); Chowdhury, S.P. [Jadavpur University, Jadavpur, Kolkata 700 032 (India)

    2006-05-15

    The paper describes an algorithm for determining the line outage contingency of a line taking into account of line over load effect in remaining lines and subsequent tripping of over loaded line(s) leading to possible system split or islanding of a power system. The optimally ordered sparse [B'], [B'] matrices for the integrated system are used for load flow analysis to determine modified values of voltage phase angles [{delta}] and bus voltages [V] to determine the over loading effect on the remaining lines due to outage of a selected line outage contingency. In case of over loading in remaining line(s), the over loaded lines are removed from the system and a topology processor is used to find the islands. A fast decoupled load flow (FDLF) analysis is carried out for finding out the system variables for the islanded (or single island) system by incorporating appropriate modification in the [B'] and [B'] matrices of the integrated system. Line outage indices based on line overload, loss of load, loss of generation and static voltage stability are computed to indicate severity of a line outage of a selected line. (author)

  10. Dynamic Analysis of Wind Turbines Including Soil-Structure Interaction

    DEFF Research Database (Denmark)

    Harte, M.; Basu, B.; Nielsen, Søren R.K.

    2012-01-01

    blades and includes the effect of centrifugal stiffening due to rotation. The foundation of the structure is modeled as a rigid gravity based foundation with two DOF whose movement is related to the surrounding soil by means of complex impedance functions generated using cone model. Transfer functions...... for displacement of the turbine system are obtained and the modal frequencies of the combined turbine-foundation system are estimated. Simulations are presented for the MDOF turbine structure subjected to wind loading for different soil stiffness conditions. Steady state and turbulent wind loading, developed using...... blade element momentum theory and the Kaimal spectrum, have been considered. Soil stiffness and damping properties acquired from DNV/Risø standards are used as a comparison. The soil-structure interaction is shown to affect the response of the wind turbine. This is examined in terms of the turbine...

  11. IGSA: Individual Gene Sets Analysis, including Enrichment and Clustering.

    Science.gov (United States)

    Wu, Lingxiang; Chen, Xiujie; Zhang, Denan; Zhang, Wubing; Liu, Lei; Ma, Hongzhe; Yang, Jingbo; Xie, Hongbo; Liu, Bo; Jin, Qing

    2016-01-01

    Analysis of gene sets has been widely applied in various high-throughput biological studies. One weakness in the traditional methods is that they neglect the heterogeneity of genes expressions in samples which may lead to the omission of some specific and important gene sets. It is also difficult for them to reflect the severities of disease and provide expression profiles of gene sets for individuals. We developed an application software called IGSA that leverages a powerful analytical capacity in gene sets enrichment and samples clustering. IGSA calculates gene sets expression scores for each sample and takes an accumulating clustering strategy to let the samples gather into the set according to the progress of disease from mild to severe. We focus on gastric, pancreatic and ovarian cancer data sets for the performance of IGSA. We also compared the results of IGSA in KEGG pathways enrichment with David, GSEA, SPIA, ssGSEA and analyzed the results of IGSA clustering and different similarity measurement methods. Notably, IGSA is proved to be more sensitive and specific in finding significant pathways, and can indicate related changes in pathways with the severity of disease. In addition, IGSA provides with significant gene sets profile for each sample.

  12. Shunted Piezoelectric Vibration Damping Analysis Including Centrifugal Loading Effects

    Science.gov (United States)

    Min, James B.; Duffy, Kirsten P.; Provenza, Andrew J.

    2011-01-01

    Excessive vibration of turbomachinery blades causes high cycle fatigue problems which require damping treatments to mitigate vibration levels. One method is the use of piezoelectric materials as passive or active dampers. Based on the technical challenges and requirements learned from previous turbomachinery rotor blades research, an effort has been made to investigate the effectiveness of a shunted piezoelectric for the turbomachinery rotor blades vibration control, specifically for a condition with centrifugal rotation. While ample research has been performed on the use of a piezoelectric material with electric circuits to attempt to control the structural vibration damping, very little study has been done regarding rotational effects. The present study attempts to fill this void. Specifically, the objectives of this study are: (a) to create and analyze finite element models for harmonic forced response vibration analysis coupled with shunted piezoelectric circuits for engine blade operational conditions, (b) to validate the experimental test approaches with numerical results and vice versa, and (c) to establish a numerical modeling capability for vibration control using shunted piezoelectric circuits under rotation. Study has focused on a resonant damping control using shunted piezoelectric patches on plate specimens. Tests and analyses were performed for both non-spinning and spinning conditions. The finite element (FE) shunted piezoelectric circuit damping simulations were performed using the ANSYS Multiphysics code for the resistive and inductive circuit piezoelectric simulations of both conditions. The FE results showed a good correlation with experimental test results. Tests and analyses of shunted piezoelectric damping control, demonstrating with plate specimens, show a great potential to reduce blade vibrations under centrifugal loading.

  13. Integrated ultrasonic and petrographical characterization of carbonate building materials

    Science.gov (United States)

    Ligas, Paola; Fais, Silvana; Cuccuru, Francesco

    2014-05-01

    petrographical and petrophysical study of the investigated stone materials to correlate their petrographical-petrophysical features with the elastic ones. From this integrated study results that the modifications in the elasto-mechanical and petrographical-petrophysical features of the investigated carbonate materials are the main causes which reduce their quality as building materials. The use of the ultrasonic method integrated with information on petrography and petrophysics of the rocks has been successful to assess the rock quality and better understanding their alteration process. Acknowledgments: This work was financially supported by Sardinian Local Administration (RAS - LR 7 August 2007, n.7, Promotion of Scientific Research and Innovation in Sardinia - Italy, Responsible Scientist: S. Fais).

  14. Detection of the incipient oxidation of coal by petrographic techniques

    CSIR Research Space (South Africa)

    Kruszewska, KJ

    1996-05-01

    Full Text Available % daf) value Coal H20 Ash VM (MJkg -l daf) C H O Swelling Roga N S no. index 1 3.2 10.5 36.2 33.9 81.5 5.9 2 2.6 7.1 33.2 34.5 84.4 5.5 3 1.6 11.9 29.9 35.5 85.3 5.6 4 1.2 13.7 24.2 36.0 88.7 5.0 5 0.8 18... of the petrographic and other analyses of the weathered samples are shown in Tables 3-7. Only those results relevant to changes due to oxidation are reported in this paper. Computed daf values are provided for the calorific value...

  15. Applied methodology to mineralogic/petrographic characterization and to the liberation grade of material proceeding from physics tests of uranium phosphate ores of Itataia - Ce, Brazil

    International Nuclear Information System (INIS)

    Salas, H.T.; Murta, R.L.L.

    1984-01-01

    A method, had been developed to determination of the liberation grade, was applied to uranium phosphate ore from Itataia rreserves, in Ceara, Brazil. The liberation grade was calculated from the petrographic analysis with quantitative mineralogy in special thin microscopic slides. (L.H.) [pt

  16. Applied methodology to mineralogic/petrographic characterization and to the liberation grade of material proceeding from physical tests of uranium phosphate ores of Itataia-Ce, Brazil

    International Nuclear Information System (INIS)

    Salas, H.T.; Murta, R.L.L.

    1984-01-01

    A method, had been developed to determination of the liberation grade, was applied to uranium-phosphate ore from Itataia reserves, in Ceara Brazil. The liberation grade was calculated from the petrographic analysis with quantitative mineralogy in special thin microscopic slides. (L.H.) [pt

  17. Petrographic and mineral characterization of Balkan coals and their solid waste products from coal preparation

    International Nuclear Information System (INIS)

    Yossifova, M.

    1995-01-01

    This paper is part of a complex petrographic, mineralogical and chemical investigation on Balkan bituminous coals and their solid waste products from coal preparation. The petrographic and phase-mineralogical composition in ten composite samples and four water extracts have been studied by optical microscopy, scanning electron microscopy and X-ray diffraction. 4 refs., 4 tabs

  18. Petrographic and major elements results as indicator of the geothermal potential in Java

    Science.gov (United States)

    Indarto, S.; Setiawan, I.; Kausar, A.; Permana, dan H.

    2018-02-01

    Geothermal manifestations existed in West Java (Cilayu, Papandayan Mountain, Telagabodas, Karaha, Tampomas Mountain), Central Java (Slamet Mountain, Dieng) and East Java (Argopuro Mountain) show a difference in their mineral and geochemical compositions. The petrographic analysis of volcanic rocks from Garut (West Java) are basalt, andesite basaltic and andesite. However, based on SiO2 vs K2O value, those volcanic rocks have wide ranges of fractionated magma resulting basalt – basaltic andesite to dacitic in composition rather than those of Slamet Mountain, Dieng, and Argopuro Mountain areas which have a narrower range of fractionation magma resulting andesite basaltic and andesite in compositions. The volcanic rocks from Garut show tholeiitic affinity and calc-alkaline affinity. The geothermal potential of Java is assumed to be related to the magma fractionation level. Geothermal potential of West Java (Garut) is higher than that of Central Java (Slamet Mountain, Dieng) and East Java (Argopuro Mountain).

  19. Berau coal in East Kalimantan; Its petrographics characteristics and depositional environment

    Directory of Open Access Journals (Sweden)

    Nana Suwarna

    2014-06-01

    Full Text Available http://dx.doi.org/10.17014/ijog.vol2no4.20071To asses the characteristics of the Early to Middle Miocene Berau coal in the Berau Basin, leading to interpretation of coal depositional environments, some fresh outcrop and subcrop samples and also drill cores of the coals have been analyzed microscopically. Coal petrographic analysis was performed on twenty four coal samples from the Middle Miocene Lati Formation. Vitrinite, present in a high value, and ranging between 66.2 - 96.2%, is dominated by vitrinite B. On the other hand, inertinite and exinite, showing a similar value, exist in a low to moderate amount. Vitrinite reflectance, present in a low value, varies from 0.40 - 0.58%. Low mineral matter content is dominated by clay minerals (0.4 - 6.6% with minor pyrite. Transitions from wet and very wet forested swamps to drier conditions with lower tree density are indicated by the higher content of vitrinite B, whilst a reverse trend is indicated by the lower content of vitrinite A. Petrographic indices obtained from facies diagnostic macerals show that an accumulation of the ancient peats under prevailing relatively wet limited influx clastic marsh to very wet forest swamps or moors is considered. The composition of the coal samples supports the interpretation of a system of fluvial to meandering streams in an upper delta plain environment. The original peat-forming vegetation was composed mainly of cellulose rich, shrub-like plants, tree ferns, herbaceous plant communities, with minor amount of trees. Thereby, the organic facies concept is thus applicable in basin studies context and has potential to become an additional tool for depositional environment interpretation.  

  20. A brief petrographic review on Nigerian coal resources

    International Nuclear Information System (INIS)

    Obaje, N. G.; Abaa, S. I.; Najime, T.; Suh, C. E.

    2000-01-01

    The coal resources of Nigeria are located mainly within the Benue Trough. In the lower Benue, subbituminous coals occur within the Maastrichtian Mamu Formation. High - volatile bituminous coals are found within the Turonian - Santonian Awgu Formation in the middle Benue while the upper Benue contains lignites and sub-bituminous coals in the Maastrichtian Gombe Sandstone Formation. Maceral analyses show that himinite dominates in the petrographic composition of the lower and upper Benue Trough coals with vitrinite reflectance values ranging from 0.30 to 0.63% Rm. In coals from the middle Benue, vitrinite macerals predominate and Rm values range from 0.74 to 1.25%. The present review suggests that the sub-bituminous coals in the lower and upper Benue are optimum for combustion and sub-optimum for liquefaction; while the high-volatile bituminous coals in the middle Benue, apart form being optimum for liquefaction, are the most suitable as raw material for coke making (carbonization) in steel manufacture

  1. Black and red granites in the Egyptian Antiquity Museum of Turin. A minero-petrographic and provenance study.

    Science.gov (United States)

    Serra, M.; Borghi, A.; Vaggelli, G.; D'Amicone, E.; Vigna, L.

    2009-04-01

    The University of Turin, in cooperation with the Egyptian Antiquity Museum, has recently undertaken several projects aimed at developing a scientific approach to the analysis of ancient Egyptian finds. In particular, a straightforward project to investigate the stony handcrafts preserved in the statuary rooms started in 2006 to obtain their systematic petrographic classification and their possible geological sources. The main intent of the project was to understand the provenance of the materials used in Pharaonic period, setting the base for the identification of the ancient quarry sites and for a correct interpretation of the extraction and working techniques, in order to provide fundamental information about economical and social development of Egyptian civilization through historical times. The choice to focus attention on black and red granites came from the statement of the percentage relevance (40 of the 54 sculptures actually exposed) of these materials in the statuary rooms. Moreover, especially for black granites, the need of detailed minero-petrographic analysis arose from the difficulty in making a macroscopic classification of the fine-grained dark-coloured rock varieties. Therefore, five black granite statues, belonging to the Drovetti collection were sampled in a micro-invasive way: three sculptures of goddess Sekhmet (cat. 260, 251, 247), the statue of Ramses II (cat. 1380) and the statue of goddess Hathor (cat. 694). The choice to analyse even three of the twenty-one statues of goddess Sekhmet (cat. 247, cat. 251, cat. 260), originally located in the same Egyptian temple but ichnographically different, derived from the need of answering the archaeological questions about their provenance. On the other hand, the opportunity of studying the fine-grained black rocks used for the sculptures of goddess Hathor (cat. 694) and of Ramses II in Majesty (cat. 1380), symbol of the Egyptian museum of Turin, provided the opportunity to analyse and classify the

  2. The Alto Paraguay Alkaline Province: petrographic, geochemical and geochronological characteristics

    International Nuclear Information System (INIS)

    Velazquez Fernandez, Victor

    1996-01-01

    The Alto Paraguay Province is located at the border of the State of Mato Grosso do Sul and Paraguay, between the coordinates 21 deg 10 ' to 23 deg 25 ' of Southern latitude and 57 deg 10 ' to 58 deg 00 ' , having the city of Porto Murtinho as the main reference point. The geotectonic domain of the area is governed by the precambric units of the Southern extreme of the Amazonic craton which developed a long and accentuated activity, giving rise to folds and important faults, that in several cases seem to have exerted an effective control of the magmatic manifestations. Radiometric data indicate that the emplacement of the syenitic bodies took place in the Permo-Triassic period, with a major incidence in the interval 260-240 Ma, representing thus, an important phase of alkaline magmatic affinity associated to the Parana Basin which is believed is to be unique, since the other known areas (Central, Amambay and Rio Apa Provinces, Paraguay, Velasco Province, Bolivia) are considerably younger (140-120 Ma). Syenitic rocks from the Alto Paraguay Province show wide variation in the ratio 87 Sr/ 86 Sr (0.703361 - 0.707734). Excluding the Cerro Boggiani rocks (0.703837-0.707734), values for the nepheline syenites (0.703361-0.703672) general lower than those of the other syenites types. Alkaline syenites cover the interval 0.703510- 0.703872, while quartz syenites and syenogranites are 0.704562 and 0.707076, respectively. geologic evidence, in addition to petrographic, geochemical and isotopic (Sr) data, suggest that the syenitic rocks have been derived from an unique mantelic parental liquid, by fractional crystallization and assimilation processes, which are assumed to be occurred during the emplacement of the magma in the crust. (author)

  3. A petrographic study of shocked minerals from the Vredefort Dome, South Africa

    Science.gov (United States)

    Quintero, R. R.; Cavosie, A. J.

    2007-12-01

    The effects of impact-induced shock metamorphism can be preserved in the microstructure of individual mineral grains in target rocks, and thus provide a record of past impact events. This undergraduate research project is a petrographic study of shock metamorphism preserved in minerals from the Vredefort Dome impact structure, South Africa, with the goal of documenting shock features using standard petrographic techniques. The Vredefort Dome is widely regarded as the oldest and largest preserved impact crater on Earth at 2.02 Ga (Kamo et al., 1996 EPSL), and is thus important in studies of impact processes on the Precambrian Earth. Five samples representing three rock types were collected from the Vredefort Dome: two different quartzites were sampled from the collar zone, including Dominion Group quartzite (Ro) on R53 north of Parys, and quartzite Rjo1 on the maps of Bisschoff (1999). In addition, three granitoids were sampled, including two pseudotachylite breccias, from the center of the dome. Two pseudotachylite samples from quarries within the amphibolite zone contain granitoid clasts; a third sample of granulite-facies granitoid (charnockite) was collected from the amphibolite-granulate transition near Vredefort. In general, all of the samples are quartz-rich, and exhibit quartz grains with variably developed planar deformation features (PDFs). Two and three compelling sets of PDFs within individual grains were only observed in quartz from the collar zone; most samples contain quartz with only one set of conspicuous PDFs, usually decorated, that are readily visible with optical light microscopy. Shock microstructures were also observed in accessory minerals, including zircon. Detrital zircons in quartzite (unit Ro) contain PDFs that are readily apparent with a 10x to 40x objective. The zircons are average size (e.g. 125 microns), and contain parallel PDFs with an apparent regular spacing of 5 microns. Zircons were observed in all granitoid and pseudotachylite

  4. Petrographic description of calcite/opal samples collected on field trip of December 5-9, 1992. Special report No. 7

    International Nuclear Information System (INIS)

    Hill, C.A.; Schluter, C.M.

    1993-06-01

    This study is part of the research program of the Yucca Mountain Project intended to provide the State of Nevada with a detailed analysis and assessment of the water-deposited minerals of Yucca Mountain and adjacent regions. Forty-three separate stops were made and 203 samples were collected during the five days of the field trip. This report describes petrographic observations made on the calcite/opal samples

  5. Petrographic report on samples from units 4 and 5 salt, lower San Andres formation, J. Friemel No. 1 well, Deaf Smith County, Palo Duro Basin, Texas

    International Nuclear Information System (INIS)

    Fukui, L.M.; Hopping, R.B.

    1985-01-01

    This report presents the results of mineralogic and petrographic analyses performed on samples of salt-bearing rock from a potential repository site in the Palo Duro Basin, Texas. The samples are from Permian Units 4 and 5 salt, Lower San Andres Formation, J. Friemel No. 1 well, Deaf Smith County, Texas. The mineralogic and petrographic data were obtained from polished thin sections cut parallel to the axis of the core for each sample. The polished thin sections were examined in order to determine the abundances of soluble (halite) and insoluble components (anhydrite, clay, carbonate, quartz, gypsum, etc.). The information reported here includes mineral associations (detrital, authigenic, cement, alteration, etc.), texture, grain size, and sedimentary fabrics. The report also includes representative photomicrographs with superimposed bar scales. Photomicrographs of polished thin sections have the up-core direction designated. X-ray diffraction was also used for identification of soluble and insoluble minerals. 7 refs., 2 tabs

  6. Petrographic characterization, geochemistry and age of the nepheline syenite of San Jose del Guaviare

    International Nuclear Information System (INIS)

    Arango Mejia, Maria Isabel; Zapata Garcia, Gilberto; Martens, Uwe

    2012-01-01

    The San Jose del Guaviare Nepheline Syenite includes two rock bodies that crop out 20 km SW of the town with the same name. The first of these bodies, which had already been reported by Vesga and Castillo (1972), is exposed in the La Pizarra area. The second body, which had not been previously reported, occurs in the Las Delicias area.Petrographic characterization shows that rocks correspond to nepheline syenite, nepheline monzosyenite, and feldspar + nepheline granofels. The main minerals in the rocks are microcline + nepheline + plagioclase + -- biotite + - arfvedsonite, and accessory phases include fluorite, sphene, apatite, garnet, zircon, epidote and calcite. Structures and textures are chiefly igneous in the la Pizarra body and mainly metamorphic (restitic) in the Las Delicias body. The geochemical character of the rocks is alkaline, and they correspond to within- the field of rocks formed in intraplate environment. The above features suggest that the San Jose del Guaviare syenite was formed by anatexis in a continental environment.U/Pb dating of zircon and 40Ar/39Ar (HS) dating of biotite indicates age 577.8+ -/0 6.3 - 9 Ma (Ediacaran) crystallization and 494+ - 5 Ma (late Cambrian) cooling.

  7. Petrographic report on clay-rich samples from Permian Unit 4 salt, G. Friemel No. 1 well, Palo Duro Basin, Deaf Smith County, Texas: unanalyzed data

    Energy Technology Data Exchange (ETDEWEB)

    Fukui, L M

    1983-09-01

    This report presents the results of mineralogic and petrographic analyses performed on five samples of clay-rich rock from salt-bearing Permian strata sampled by drill core from G. Friemel No. 1 Well, Deaf Smith County, Texas. Five samples of clay-rich rock from depths of about 2457, 2458, 2521, 2548, and 2568 feet were analyzed to determine the amounts of soluble phase (halite) and the amounts and mineralogy of the insoluble phases. The amounts of halite found were 59, 79, 47, 40, and 4 weight percent, respectively, for the samples. The insoluble minerals are predominately clay (20 to 60 volume percent) and anhydrite (up to 17 volume percent), with minor (about 1.0%) and trace amounts of quartz, dolomite, muscovite, and gypsum. The clays include illite, chlorite, and interstratified chlorite-smectite. The results presented in this petrographic report are descriptive, uninterpreted data. 2 references, 7 tables.

  8. Petrographic report on clay-rich samples from Permian Unit 4 salt, G. Friemel No. 1 well, Palo Duro Basin, Deaf Smith County, Texas: unanalyzed data

    International Nuclear Information System (INIS)

    Fukui, L.M.

    1983-09-01

    This report presents the results of mineralogic and petrographic analyses performed on five samples of clay-rich rock from salt-bearing Permian strata sampled by drill core from G. Friemel No. 1 Well, Deaf Smith County, Texas. Five samples of clay-rich rock from depths of about 2457, 2458, 2521, 2548, and 2568 feet were analyzed to determine the amounts of soluble phase (halite) and the amounts and mineralogy of the insoluble phases. The amounts of halite found were 59, 79, 47, 40, and 4 weight percent, respectively, for the samples. The insoluble minerals are predominately clay (20 to 60 volume percent) and anhydrite (up to 17 volume percent), with minor (about 1.0%) and trace amounts of quartz, dolomite, muscovite, and gypsum. The clays include illite, chlorite, and interstratified chlorite-smectite. The results presented in this petrographic report are descriptive, uninterpreted data. 2 references, 7 tables

  9. Petrographic and geochemical characteristics of the Cypress Creek salt core

    International Nuclear Information System (INIS)

    1983-07-01

    Law Engineering Testing Company supervised the drilling of a corehole into the stock of Cypress Creek Dome, located in Perry County, Mississippi. A total of 170 ft of caprock and 501 ft of salt stock was recovered for physical examination and chemical analysis. This report describes the types of analyses performed and summarizes the data developed. The entire caprock and salt core were described and photographed prior to selection of samples for petrologic and geochemical analysis. Transmitted light techniques were used to determine gross structural and compositional variations in the core. The core lithologies are presented graphically, at a scale of 1 in. to 2 ft. In addition to the detailed field descriptions and photographs, petrologic studies performed on selected caprock and salt samples included: thin-section examination, scanning-electron microscope studies, energy-dispersion analysis, and x-ray-diffraction analysis. Geochemical analyses were performed to determine the average elemental composition of the salt core and amounts of methane and carbon dioxide gases contained within the salt grains. Except for two thin (3 and 6 ft thick) gypsum zones in the top 27 ft of the caprock, the core is predominantly anhydrite (generally 80%). Minor amounts of dolomite and calcite are also present. The salt core consists predominantly of crystalline halite, fine- to medium-grained (0.25 to 1 in.) with few megacrysts. Anhydrite occurs in the salt core as disseminated grains, ranging in length from <0.1 in. to 12 in. Discrete zones exist within the salt core, distinguished from one another primarily by the character of the anhydrite inclusions

  10. Chemical, petrographic, and K-Ar age data to accompany reconnaissance geologic strip map from Kingman to south of Bill Williams Mountain, Arizona

    International Nuclear Information System (INIS)

    Arney, B.; Goff, F.; Eddy, A.C.

    1985-04-01

    As part of a reconnaissance mapping project, 40 chemical analyses and 13 potassium-argon age dates were obtained for Tertiary volcanic and Precambrian granitic rocks between Kingman and Bill Williams Mountain, Arizona. The dated volcanic rocks range in age from 5.5 +- 0.2 Myr for basalt in the East Juniper Mountains to about 25 Myr for a biotite-pyroxene andesite. The date for Picacho Butte, a rhyodacite in the Mt. Floyd volcanic field, was 9.8 +- 0.07 Myr, making it the oldest rhyodacite dome in that volcanic field. Dated rocks in the Fort Rock area range from 20.7 to 24.3 Myr. No ages were obtained on the Precambrian rocks. Compositionally, the volcanic rocks analyzed range from alkali basalt to rhyolite, but many rocks on the western side of the map area are unusually potassic. The granites chosen for analysis include syenogranite from the Hualapai Mountains, a muscovite granite from the Picacho Butte area, and two other granites. The chemical and K-Ar age data and petrographic descriptions included in this report accompany the reconnaissance geologic strip map published as LA-9202-MAP by Goff, Eddy, and Arney. 9 refs., 4 figs., 2 tabs

  11. Recommended procedures and techniques for the petrographic description of bituminous coals

    Science.gov (United States)

    Chao, E.C.T.; Minkin, J.A.; Thompson, C.L.

    1982-01-01

    bed. The use of bulk-specific-gravity determinations is alo recommended for identification and characterization of the distinctive lithologic units. The availability of an AIAS also enhances the capability to acquire textural information. Ranges of size of maceral and mineral grains can be quickly and precisely determined by use of an AIAS. We assume that shape characteristics of coal particles can also be readily evaluated by automated image analysis, although this evaluation has not yet been attempted in our laboratory. Definitive data on the particulate mineral content of coal constitute another important segment of petrographic description. Characterization of mineral content may be accomplished by optical identification, electron microprobe analysis, X-ray diffraction, and scanning and transmission electron microscopy. Individual mineral grains in place in polished blocks or polished this sections, or separated from the coal matrix by sink-float methods are studied by analytical techniques appropriate to the conditions of sampling. Finally, whenever possible, identification of the probable genus or plant species from which a given coal component is derived will add valuable information and meaning to the petrographic description. ?? 1982.

  12. A thermoanalytical, X-ray diffraction and petrographic approach to the forensic assessment of fire affected concrete in the United Arab Emirates.

    Science.gov (United States)

    Alqassim, M A; Jones, M R; Berlouis, L E A; Nic Daeid, N

    2016-07-01

    For most fires, forensic investigation takes place well after building materials have cooled and knowledge of the structural damage due to heat exposure can reveal the temperature reached during an incident. Recently, there have been significant changes in the types and hence characteristics of cementitious materials used in the United Arab Emirates. Few studies focus on the application of thermo-analytical, X-ray diffraction and petrographic techniques on newly developed structures and this work aims to address this deficiency by utilising a series of parametric laboratory-based tests to assess the effects of heat on hardened concrete. Specimens were made with a design mix typically used for low-rise residential homes and storage facilities. The key constituents were: Portland cement (PC), crushed gabbro stone and dune sand with water/cement ratios of 0.4-0.5. Portland cement substitutes included ground granulated blast-furnace slag (GGBS), and silica fume (SF) at replacement percentages of up to 50% and 4%, respectively. The concrete cubes of 100-mm size were produced and standard cured to 28 days and then exposed to heat inside an electric furnace with pre-determined temperature regimes of 150°C, 300°C, 600°C and 900°C. Petrographic examination was utilised to compare the discolouration of the cooled concrete. Data derived from thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) are reported in order to assess the usefulness of these techniques in fire scene investigation to differentiate between these temperature regimes. The results from the TGA indicate that the majority of the percentage weight loss for all the mixtures occurred in the range 650-700°C, which corresponds to the decarbonation of calcium carbonate, mainly from the aggregates. The endothermic DSC peak at 70-120°C relates to the loss of evaporable water. Since both of these reactions are irreversible, this information can help fire investigators estimate the

  13. Does Working Memory Training Transfer? A Meta-Analysis Including Training Conditions as Moderators

    Science.gov (United States)

    Schwaighofer, Matthias; Fischer, Frank; Bühner, Markus

    2015-01-01

    A meta-analysis was undertaken to reexamine near- and far-transfer effects following working-memory training and to consider potential moderators more systematically. Forty-seven studies with 65 group comparisons were included in the meta-analysis. Results showed near-transfer effects to short-term and working-memory skills that were sustained at…

  14. A review of the reliability analysis of LPRS including the components repairs

    International Nuclear Information System (INIS)

    Oliveira, L.F.S. de; Fleming, P.V.; Frutuoso e Melo, P.F.F.; Tayt-Sohn, L.C.

    1983-01-01

    The reliability analysis of low pressure recirculation system in its long-term recicurlation phase before 24hs is presented. The possibility of repairing the components out of the containment is included. A general revision of analysis of the short-term recirculation phase is done. (author) [pt

  15. Petrographic atlas characterisation of aggregates regarding potential reactivity to alkalis : RILEM TC 219-ACS recommended guidance AAR-1.2, for use with the RILEM AAR-1.1 petrographic examination method

    CERN Document Server

    Ribeiro, Maria; Broekmans, Maarten; Sims, Ian

    2016-01-01

    This RILEM AAR 1.2 Atlas is complementary to the petrographic method described in RILEM AAR 1.1. It is designed and intended to assist in the identification of alkali-reactive rock types in concrete aggregate by thin-section petrography. Additional issues include: • optical thin-section petrography conforming to RILEM AAR 1.1 is considered the prime assessment method for aggregate materials, being effective regarding cost and time. Unequivocal identification of minerals in very-fine grained rock types may however require use of supplementary methods. • the atlas adheres to internationally adopted schemes for rock classification and nomenclature, as recommended in AAR 1.1. Thus, rock types are classified as igneous, sedimentary or metamorphic based upon mineral content, microstructure and texture/fabric. • in addition, the atlas identifies known alkali-reactive silica types in each rock type presented. It also identifies consistent coincidence between certain lithologies and silica types; however, it ref...

  16. The Itataia phosphate-uranium deposit (Ceará, Brazil) new petrographic, geochemistry and isotope studies

    Science.gov (United States)

    Veríssimo, César Ulisses Vieira; Santos, Roberto Ventura; Parente, Clóvis Vaz; Oliveira, Claudinei Gouveia de; Cavalcanti, José Adilson Dias; Nogueira Neto, José de Araújo

    2016-10-01

    The Itataia phosphate-uranium deposit is located in Santa Quitéria, in central Ceará State, northeastern Brazil. Mineralization has occurred in different stages and involves quartz leaching (episyenitization), brecciation and microcrystalline phase formation of concretionary apatite. The last constitutes the main mineral of Itatiaia uranium ore, namely collophane. Collophanite ore occurs in massive bodies, lenses, breccia zones, veins or episyenite in marble layers, calc-silicate rocks and gneisses of the Itataia Group. There are two accepted theories on the origin of the earliest mineralization phase of Itataia ore: syngenetic (primary) - where the ore is derived from a continental source and then deposited in marine and coastal environments; and epigenetic (secondary) - whereby the fluids are of magmatic, metamorphic and meteoric origin. The characterization of pre- or post-deformational mineralization is controversial, since the features of the ore are interpreted as deformation. This investigation conducted isotopic studies and chemical analyses of minerals in marbles and calc-silicate rocks of the Alcantil and Barrigas Formations (Itataia Group), as well as petrographic and structural studies. Analysis of the thin sections shows at least three phosphate mineral phases associated with uranium mineralizaton: (1) A prismatic fluorapatite phase associated with chess-board albite, arfvedsonite and ferro-eckermannite; (2) a second fluorapatite phase with fibrous radial or colloform habits that replaces calcium carbonate in marble, especially along fractures, with minerals such as quartz, chlorite and zeolite also identified in calc-silicate rocks; and (3) an younger phosphate phase of botryoidal apatite (fluorapatite and hydroxyapatite) related with clay minerals and probably others calcium and aluminum phosphates. Detailed isotopic analysis carried out perpendicularly to the mineralized levels and veins in the marble revealed significant variation in isotopic

  17. Polycyclic migmatites from southern of Minas Gerais state and adjacent parts: structural/petrographic characterization and geochronological data

    International Nuclear Information System (INIS)

    The geology of the southern part of the State of Minas Gerais and adjacent parts of the State of Sao Paulo (SE Brazil) is built up by gray gneisses (Barbacena and Amparo Complexes), pink gneisses (Pinhal Complex) and granulites (Guaxupe Complex) areas, the oldest of them of Archaean ages. Structural, petrographic, geochronological and geologic data indicate that in fact each of those complexes is the result of a long evolution including successive phases of deformation, anatexis and intrusions. The extensive migmatization of the Archaean rocks during the Lower and Upper Proterozoic combined with the intrusion of huge granitoid bodies suggest that the considered region has been involved in successively continental approaches by subduction/collision processes. (author)

  18. Vertical evolution of petrographic and organic geochemical parameters in Las Duenas mire (Cantabrian Coast, North Spain)

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-Dias, V.; Borrego, A.G.; Blanco, C.G. [Instituto Nacional del Carbon (CSIC), Oviedo (Spain)

    2010-12-01

    Las Duenas mire has developed on a flat siliceous substrate over the Holocene. The sedimentary cover has a thickness of around 50 cm and the mire comprises a surface area of 27 ha. A core sample obtained using a manual probe was split into sub-samples of around 3-4 cm thickness for petrographic and organic geochemical analysis. The fen originated by minerogenesis and contains a high concentration of mineral matter throughout its profile which decreases towards the top. The present day vegetation is dominated by Sphagnum. A variety of transparent textinite with intense fluorescence is evidence of the low maturity of the profile, which is also confirmed by the presence of low reflecting huminite of the A variety (Hr {proportional_to} 0.15%). The fluorescence spectra of sporinite and cutinite are similar and, compared with those of transparent textinite, they have a lower intensity and are shifted to higher wavelengths. The low maturity of the organic matter is also confirmed by the presence of unstable {beta}{beta} hopane configurations, the abundance of hopene, and the presence of functionalized hopanoids, steroids and other triterpenoids. The evolution of the geochemical parameters in the peat profile indicates the presence of more humid conditions in the top 4 cm and at a depth of 11-15 cm. These periods are characterized by a high Sphagnum/higher plant contribution as deduced from the n-alkane ratios. The low reflectance of huminite at the depth of 11-15 cm could also support less oxidizing condition. The sediment at a depth of 22 cm where peaty matter starts to accumulate has been dated as 9603 cal BC, whereas the plant fraction at the same depth dates back to a maximum of 200 years. Sediment reworking derived from radiocarbon dates indicates that this fen is not suitable for palaeoenvironmental studies. (author)

  19. Heterogeneity of groundwater storage properties in the critical zone of Irish metamorphic basement from geophysical surveys and petrographic analyses

    Science.gov (United States)

    Comte, Jean-Christophe; Cassidy, Rachel; Caulfield, John; Nitsche, Janka; Ofterdinger, Ulrich; Wilson, Christopher

    2016-04-01

    Weathered/fractured bedrock aquifers contain groundwater resources that are crucial in hard rock basement regions for rural water supply and maintaining river flow and ecosystem resilience. Groundwater storage in metamorphic rocks is subject to high spatial variations due to the large degree of heterogeneity in fracture occurrence and weathering patterns. Point measurements such as borehole testing are, in most cases, insufficient to characterise and quantify those storage variations because borehole sampling density is usually much lower than the scale of heterogeneities. A suite of geophysical and petrographic investigations was implemented in the weathered/fractured micaschist basement of Donegal, NW Ireland. Electrical Resistivity Tomography provided a high resolution 2D distribution of subsurface resistivities. Resistivity variations were transferred into storage properties (i.e. porosities) in the saturated critical zone of the aquifer through application of a petrophysical model derived from Archie's Law. The petrophysical model was calibrated using complementary borehole gamma logging and clay petrographic analysis at multi-depth well clusters distributed along a hillslope transect at the site. The resulting distribution of porosities shows large spatial variations along the studied transect. With depth, porosities rapidly decrease from about a few % in the uppermost, highly weathered basement to less than 0.5% in the deep unweathered basement, which is encountered at depths of between 10 and 50m below the ground surface. Along the hillslope, porosities decrease with distance from the river in the valley floor, ranging between 5% at the river to less than 1% at the top of the hill. Local traces of regional fault zones that intersect the transect are responsible for local increases in porosity in relation to deeper fracturing and weathering. Such degrees of spatial variation in porosity are expected to have a major impact on the modality of the response of

  20. Petrographical Characters of Some important host rocks in ...

    African Journals Online (AJOL)

    user1

    identified included piedmonite, epidote, apatite, zircon, microcline and sphene. The diopside is an important and a constant mineral occurring in all thin sections of calc-granulite. It is green in color, irregular in form having a moderate relief with well-developed one set of cleavage. Some of the grains are faintly pleochroic.

  1. Combined effects of petrographic and technological parameters on strength of porous coke substance

    Energy Technology Data Exchange (ETDEWEB)

    Dinel' t, V.M.; Shkoller, M.B.; Stankevich, A.S.; Korchuganova, G.S.

    1983-01-01

    A laboratory study was undertaken to study the combined effects of the basic petrographic characteristics of Kuzbas coal blends and the technological carbonization parameters on the structural strength of the porous coke. Strength tests were carried out on the original coke and the products of partial gasification with carbon dioxide under conditions simulating those inside blast furnaces. Properties of the 14 samples of Kuzbas coals and composition of the four coal blends made from them are listed. It was concluded that the structural strength of coke was most strongly influenced by the average reflectance index and bulk density of the charge. Also, charge compaction can largely offset the adverse influence of petrographic heterogeneity on the strength of the coke. 10 references, 3 tables.

  2. Petrographic characteristics of coal tailings in regard to their use in hydrotechnological engineering

    Energy Technology Data Exchange (ETDEWEB)

    Skarzynska, K.; Kozielska-Sroka, E.; Setmajer, J.

    1987-03-01

    Concerns utilization of waste rock and aggregate from spoil banks stemming from coal mines. Describes geologic structure and types of rocks occurring in the Upper-Silesian coal basin. Spoil banks were investigated and rock samples taken in order to determine their petrographic characteristics. Analyses of materials taken from 17 mines indicate that mudstone and clayey shale prevail in the waste. Petrographic data on mine waste material are presented in 10 tables. It is maintained that mine waste material could be used for river embankments. In draw areas, 420 km of river embankments should be constructed by the year 2000 requiring 33 million m/sup 3/ of material. The possibility of filling subsidence troughs with mine waste material instead of building drainage systems is also discussed. 13 refs.

  3. Application of petrographic examination techniques to the assessment of fire-damaged concrete and masonry structures

    International Nuclear Information System (INIS)

    Ingham, Jeremy P.

    2009-01-01

    The number of building fires has doubled over the last 50 years. There has never been a greater need for structures to be assessed for fire damage to ensure safety and enable appropriate repairs to be planned. Fortunately, even after a severe fire, concrete and masonry structures are generally capable of being repaired rather than demolished. By allowing direct examination of microcracking and mineralogical changes, petrographic examination has become widely used to determine the depth of fire damage for reinforced concrete elements. Petrographic examination can also be applied to fire-damaged masonry structures built of materials such as stone, brick and mortar. Petrography can ensure accurate detection of damaged geomaterials, which provides cost savings during building repair and increased safety reassurance. This paper comprises a review of the role of petrography in fire damage assessments, drawing on a range of actual fire damage investigations.

  4. Petrographical indicators of petrogenesis: Examples from Central Indian Ocean Basin basalts

    Digital Repository Service at National Institute of Oceanography (India)

    Mislankar, P.G.; Iyer, S.D.

    petrographic entities that can help to establish a range of under- coolings. The distinction may simply be differences in the length of acicular plagioclase needles in flow interiors 7 and spacing between plagioclase dendrites at known distances from... carried out to help identify the various morpho-tectonic features of the basin. Besides the nodules and encrustations, a number of volcanics were also retrieved. Most of the volcanics are basalts obtained from a depth of 5000 m between lat. 10 o -15 o...

  5. Predicting Automotive Interior Noise Including Wind Noise by Statistical Energy Analysis

    OpenAIRE

    Yoshio Kurosawa

    2017-01-01

    The applications of soundproof materials for reduction of high frequency automobile interior noise have been researched. This paper presents a sound pressure prediction technique including wind noise by Hybrid Statistical Energy Analysis (HSEA) in order to reduce weight of acoustic insulations. HSEA uses both analytical SEA and experimental SEA. As a result of chassis dynamo test and road test, the validity of SEA modeling was shown, and utility of the method was confirmed.

  6. A structural design and analysis of a piping system including seismic load

    International Nuclear Information System (INIS)

    Hsieh, B.J.; Kot, C.A.

    1991-01-01

    The structural design/analysis of a piping system at a nuclear fuel facility is used to investigate some aspects of current design procedures. Specifically the effect of using various stress measures including ASME Boiler ampersand Pressure Vessel (B ampersand PV) Code formulas is evaluated. It is found that large differences in local maximum stress values may be calculated depending on the stress criterion used. However, when the global stress maximum for the entire system are compared the differences are much smaller, being nevertheless, for some load combinations, of the order of 50 percent. The effect of using an Equivalent Static Method (ESM) analysis is also evaluated by comparing its results with those obtained from a Response Spectrum Method (RSM) analysis with the modal responses combined by using the absolute summation (ABS), by using the square root of the squares (SRSS), and by using the 10 percent method (10PC). It is shown that for a spectrum amplification factor (equivalent static coefficient greater than unity) of at least 1.32 must be used in the current application of the ESM analysis in order to obtain results which are conservative in all aspects relative to an RSM analysis based on ABS. However, it appears that an adequate design would be obtained from the ESM approach even without the use of a spectrum amplification factor. 7 refs., 3 figs., 3 tabs

  7. 'Including health in systems responsible for urban planning': a realist policy analysis research programme.

    Science.gov (United States)

    Harris, Patrick; Friel, Sharon; Wilson, Andrew

    2015-07-23

    Realist methods are increasingly being used to investigate complex public health problems. Despite the extensive evidence base clarifying the built environment as a determinant of health, there is limited knowledge about how and why land-use planning systems take on health concerns. Further, the body of research related to the wider determinants of health suffers from not using political science knowledge to understand how to influence health policy development and systems. This 4-year funded programme of research investigates how the land-use planning system in New South Wales, Australia, incorporates health and health equity at multiple levels. The programme uses multiple qualitative methods to develop up to 15 case studies of different activities of the New South Wales land-use planning system. Comparison cases from other jurisdictions will be included where possible and useful. Data collection includes publicly available documentation and purposively sampled stakeholder interviews and focus groups of up to 100 participants across the cases. The units of analysis in each case are institutional structures (rules and mandates constraining and enabling actors), actors (the stakeholders, organisations and networks involved, including health-focused agencies), and ideas (policy content, information, and framing). Data analysis will focus on and develop propositions concerning the mechanisms and conditions within and across each case leading to inclusion or non-inclusion of health. Data will be refined using additional political science and sociological theory. Qualitative comparative analysis will compare cases to develop policy-relevant propositions about the necessary and sufficient conditions needed to include health issues. Ethics has been approved by Sydney University Human Research Ethics Committee (2014/802 and 2015/178). Given the nature of this research we will incorporate stakeholders, often as collaborators, throughout. We outline our research translation

  8. Detailed petrographic descriptions and microprobe data for tertiary silicic volcanic rocks in drill hole USW G-1, Yucca Mountain, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    Caporuscio, F.A.; Warren, R.G.; Broxton, D.E.

    1985-12-01

    This report contains detailed petrographic descriptions of 74 thin sections from drill hole USW G-1 at Yucca Mountain, Nevada. These descriptions are keyed to the distinctions between devitrified, vitrophyre, vitric, and zeolitized intervals below the Topopah Spring Member repository horizon. The petrographic features of the zeolitized intervals down through the Crater Flat tuff, as well as the sorption properties determined from these intervals, suggest that these zeolite occurrences may each have comparable sorptive capability.

  9. Isogeometric analysis of free-form Timoshenko curved beams including the nonlinear effects of large deformations

    Science.gov (United States)

    Hosseini, Seyed Farhad; Hashemian, Ali; Moetakef-Imani, Behnam; Hadidimoud, Saied

    2018-03-01

    In the present paper, the isogeometric analysis (IGA) of free-form planar curved beams is formulated based on the nonlinear Timoshenko beam theory to investigate the large deformation of beams with variable curvature. Based on the isoparametric concept, the shape functions of the field variables (displacement and rotation) in a finite element analysis are considered to be the same as the non-uniform rational basis spline (NURBS) basis functions defining the geometry. The validity of the presented formulation is tested in five case studies covering a wide range of engineering curved structures including from straight and constant curvature to variable curvature beams. The nonlinear deformation results obtained by the presented method are compared to well-established benchmark examples and also compared to the results of linear and nonlinear finite element analyses. As the nonlinear load-deflection behavior of Timoshenko beams is the main topic of this article, the results strongly show the applicability of the IGA method to the large deformation analysis of free-form curved beams. Finally, it is interesting to notice that, until very recently, the large deformations analysis of free-form Timoshenko curved beams has not been considered in IGA by researchers.

  10. A tool to include gamma analysis software into a quality assurance program.

    Science.gov (United States)

    Agnew, Christina E; McGarry, Conor K

    2016-03-01

    To provide a tool to enable gamma analysis software algorithms to be included in a quality assurance (QA) program. Four image sets were created comprising two geometric images to independently test the distance to agreement (DTA) and dose difference (DD) elements of the gamma algorithm, a clinical step and shoot IMRT field and a clinical VMAT arc. The images were analysed using global and local gamma analysis with 2 in-house and 8 commercially available software encompassing 15 software versions. The effect of image resolution on gamma pass rates was also investigated. All but one software accurately calculated the gamma passing rate for the geometric images. Variation in global gamma passing rates of 1% at 3%/3mm and over 2% at 1%/1mm was measured between software and software versions with analysis of appropriately sampled images. This study provides a suite of test images and the gamma pass rates achieved for a selection of commercially available software. This image suite will enable validation of gamma analysis software within a QA program and provide a frame of reference by which to compare results reported in the literature from various manufacturers and software versions. Copyright © 2015. Published by Elsevier Ireland Ltd.

  11. Analysis of general and specific combining abilities of popcorn populations, including selfed parents

    Directory of Open Access Journals (Sweden)

    José Marcelo Soriano Viana

    2003-12-01

    Full Text Available Estimation of general and specific combining ability effects in a diallel analysis of cross-pollinating populations, including the selfed parents, is presented in this work. The restrictions considered satisfy the parametric values of the GCA and SCA effects. The method is extended to self-pollinating populations (suitable for other species, without the selfed parents. The analysis of changes in population means due to inbreeding (sensitivity to inbreeding also permits to assess the predominant direction of dominance deviations and the relative genetic variability in each parent population. The methodology was used to select popcorn populations for intra- and inter-population breeding programs and for hybrid production, developed at the Federal University of Viçosa, MG, Brazil. Two yellow pearl grain popcorn populations were selected.

  12. Slideline verification for multilayer pressure vessel and piping analysis including tangential motion

    International Nuclear Information System (INIS)

    Van Gulick, L.A.

    1984-01-01

    Nonlinear finite element method (FEM) computer codes with slideline algorithm implementations should be useful for the analysis of prestressed multilayer pressure vessels and piping. This paper presents closed form solutions including the effects of tangential motion useful for verifying slideline implementations for this purpose. The solutions describe stresses and displacements of a long internally pressurized elastic-plastic cylinder initially separated from an elastic outer cylinder by a uniform gap. Comparison of closed form and FEM results evaluates the usefulness of the closed form solution and the validity of the sideline implementation used

  13. Analysis Technique for Exhaust Gas Including PFCs from Microelectronics Manufacturing Processes

    Science.gov (United States)

    Tomita, Nobuyasu; Isaki, Ryuichiro

    In the manufacturing processes of Semiconductor and the Liquid Crystal Display (LCD), Perfluorocompounds (PFCs), Sulfurhexafluoride (SF6) and Nitrogenfluoride (NF3), which have high Green house effect,are used in large quantities. As emission reduction of these gases, the following countermeasures are taken. 1. Opimization of PFCs usage 2. Utilization of alternative gas 3. Instllation of Scrubber for exhaust gas treatment To inspect the effect of countermeasure that are introduced for these PFCs emission reduction, it is necessary to analyze PFCs in exhaust gas. In this report, we will discribe about analysis technique for exhaust gas including PFCs from microelectornics manufacturing processes.

  14. Multi trace element analysis of dry biological materials by neutron activation analysis including a chemical group separation

    International Nuclear Information System (INIS)

    Weers, C.A.

    1980-07-01

    Multi-element analysis of dry biological material by neutron activation analysis has to include radiochemical separation. The evaporation process is described in terms of the half-volume. The pretreatment of the samples and the development of the destruction-evaporation apparatus are described. The successive adsorption steps with active charcoal, Al 2 O 3 and coprecipitation with Fe(OH) 3 are described. Results obtained for standard reference materials are summarized. (G.T.H.)

  15. Analysis of initial events in radiation-induced lymphomagenesis. Investigation of chromosome aberration including translocations

    International Nuclear Information System (INIS)

    Chen Ying

    1995-01-01

    To investigate the contribution of chromosome aberrations in radiation-induced lymphomagenesis, chromosome G-banding analysis of the lymphoma cells (8 groups and 34 kinds of cells), of which each group was derived from a single donor by intra-thymic injection of a limited number of prelymphoma cells, was performed. Many numerical and structural aberrations were observed in the donor-derived T cell lymphomas. Common aberrations including translocations were found almost in the lymphomas of all groups. Translocations between chromosomes 11 and 12, 12 and 15, 7 and 10, 1 and 13, 6 and X were found in D, E, F, G, H, groups, respectively. There were also common aberrations such as trisomy 15 in A and F groups. These results indicate that chromosome aberrations including translocations may be important candidates of initiating events in radiation-induced lymphomagenesis

  16. Steady-state analysis of activated sludge processes with a settler model including sludge compression.

    Science.gov (United States)

    Diehl, S; Zambrano, J; Carlsson, B

    2016-01-01

    A reduced model of a completely stirred-tank bioreactor coupled to a settling tank with recycle is analyzed in its steady states. In the reactor, the concentrations of one dominant particulate biomass and one soluble substrate component are modelled. While the biomass decay rate is assumed to be constant, growth kinetics can depend on both substrate and biomass concentrations, and optionally model substrate inhibition. Compressive and hindered settling phenomena are included using the Bürger-Diehl settler model, which consists of a partial differential equation. Steady-state solutions of this partial differential equation are obtained from an ordinary differential equation, making steady-state analysis of the entire plant difficult. A key result showing that the ordinary differential equation can be replaced with an approximate algebraic equation simplifies model analysis. This algebraic equation takes the location of the sludge-blanket during normal operation into account, allowing for the limiting flux capacity caused by compressive settling to easily be included in the steady-state mass balance equations for the entire plant system. This novel approach grants the possibility of more realistic solutions than other previously published reduced models, comprised of yet simpler settler assumptions. The steady-state concentrations, solids residence time, and the wastage flow ratio are functions of the recycle ratio. Solutions are shown for various growth kinetics; with different values of biomass decay rate, influent volumetric flow, and substrate concentration. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Celtiberian ceramic productions from the Central Iberian range (Spain): Chemical and petrographic characterization; Producciones de ceramica Celtiberica procedentes del sistema Iberico Central (Espana): Caracterizacion quimica y petrografica

    Energy Technology Data Exchange (ETDEWEB)

    Igea, J.; Perez-Arantegup, J.; Lapuente, P.; Saiz, M. E.; Burillo, F.

    2013-02-01

    As part of an extended program on archaeometric research of the Celtiberian production centres situated along the Celtiberian Range, ceramic fragments of different vessel types from two selected Celtiberian workshops were analyzed: La Rodriga (Guadalajara, Spain) and Allueva II (Teruel, Spain), dated from the 3nd to the 2st centuries BC. The characterization was focused on the chemical analysis by Inductively Coupled Plasma-Mass Spectrometry, and subjected to commonly used multivariate statistical methods to distinguish between ceramic materials and to discriminate among different compositional groups in each production centre. The analysis was completed by performing petrographic characterization, textural observations, colour measurement and mineralogical analysis of the pieces by means of XRD. The compositional variations from major, minor and trace elements allowed to establish two subgroups in La Rodriga and one ceramic group in Allueva II. The chemical composition differences were confirmed by the petrographic characteristics and the mineralogical composition of the ceramic fabrics. These results enabled us to complete the preliminary archaeometric study in order to improve the knowledge on cultural and commercial influences in this important Celtiberian territory. (Author) 22 refs.

  18. A multimethod analysis of shared decision-making in hospice interdisciplinary team meetings including family caregivers.

    Science.gov (United States)

    Washington, Karla T; Oliver, Debra Parker; Gage, L Ashley; Albright, David L; Demiris, George

    2016-03-01

    Much of the existing research on shared decision-making in hospice and palliative care focuses on the provider-patient dyad; little is known about shared decision-making that is inclusive of family members of patients with advanced disease. We sought to describe shared decision-making as it occurred in hospice interdisciplinary team meetings that included family caregivers as participants using video-conferencing technology. We conducted a multimethod study in which we used content and thematic analysis techniques to analyze video-recordings of hospice interdisciplinary team meetings (n = 100), individual interviews of family caregivers (n = 73) and hospice staff members (n = 78), and research field notes. Participants in the original studies from which data for this analysis were drawn were hospice family caregivers and staff members employed by one of five different community-based hospice agencies located in the Midwestern United States. Shared decision-making occurred infrequently in hospice interdisciplinary team meetings that included family caregivers. Barriers to shared decision-making included time constraints, communication skill deficits, unaddressed emotional needs, staff absences, and unclear role expectations. The hospice philosophy of care, current trends in healthcare delivery, the interdisciplinary nature of hospice teams, and the designation of a team leader/facilitator supported shared decision-making. The involvement of family caregivers in hospice interdisciplinary team meetings using video-conferencing technology creates a useful platform for shared decision-making; however, steps must be taken to transform family caregivers from meeting attendees to shared decision-makers. © The Author(s) 2015.

  19. Diversity of Pseudomonas Genomes, Including Populus-Associated Isolates, as Revealed by Comparative Genome Analysis.

    Science.gov (United States)

    Jun, Se-Ran; Wassenaar, Trudy M; Nookaew, Intawat; Hauser, Loren; Wanchai, Visanu; Land, Miriam; Timm, Collin M; Lu, Tse-Yuan S; Schadt, Christopher W; Doktycz, Mitchel J; Pelletier, Dale A; Ussery, David W

    2016-01-01

    The Pseudomonas genus contains a metabolically versatile group of organisms that are known to occupy numerous ecological niches, including the rhizosphere and endosphere of many plants. Their diversity influences the phylogenetic diversity and heterogeneity of these communities. On the basis of average amino acid identity, comparative genome analysis of >1,000 Pseudomonas genomes, including 21 Pseudomonas strains isolated from the roots of native Populus deltoides (eastern cottonwood) trees resulted in consistent and robust genomic clusters with phylogenetic homogeneity. All Pseudomonas aeruginosa genomes clustered together, and these were clearly distinct from other Pseudomonas species groups on the basis of pangenome and core genome analyses. In contrast, the genomes of Pseudomonas fluorescens were organized into 20 distinct genomic clusters, representing enormous diversity and heterogeneity. Most of our 21 Populus-associated isolates formed three distinct subgroups within the major P. fluorescens group, supported by pathway profile analysis, while two isolates were more closely related to Pseudomonas chlororaphis and Pseudomonas putida. Genes specific to Populus-associated subgroups were identified. Genes specific to subgroup 1 include several sensory systems that act in two-component signal transduction, a TonB-dependent receptor, and a phosphorelay sensor. Genes specific to subgroup 2 contain hypothetical genes, and genes specific to subgroup 3 were annotated with hydrolase activity. This study justifies the need to sequence multiple isolates, especially from P. fluorescens, which displays the most genetic variation, in order to study functional capabilities from a pangenomic perspective. This information will prove useful when choosing Pseudomonas strains for use to promote growth and increase disease resistance in plants. Copyright © 2015 Jun et al.

  20. Earthquake analysis of structures including structure-soil interaction by a substructure method

    International Nuclear Information System (INIS)

    Chopra, A.K.; Guttierrez, J.A.

    1977-01-01

    A general substructure method for analysis of response of nuclear power plant structures to earthquake ground motion, including the effects of structure-soil interaction, is summarized. The method is applicable to complex structures idealized as finite element systems and the soil region treated as either a continuum, for example as a viscoelastic halfspace, or idealized as a finite element system. The halfspace idealization permits reliable analysis for sites where essentially similar soils extend to large depths and there is no rigid boundary such as soil-rock interface. For sites where layers of soft soil are underlain by rock at shallow depth, finite element idealization of the soil region is appropriate; in this case, the direct and substructure methods would lead to equivalent results but the latter provides the better alternative. Treating the free field motion directly as the earthquake input in the substructure eliminates the deconvolution calculations and the related assumption-regarding type and direction of earthquake waves-required in the direct method. (Auth.)

  1. Global analysis of Solar neutrino oscillation evidence including SNO and implications for Borexino

    CERN Document Server

    Aliani, P; Picariello, M; Torrente-Lujan, E

    2002-01-01

    An updated analysis of all available neutrino oscillation evidence in Solar experiments including the latest $SNO$ data is presented. Predictions for total rates and day-night asymmetry in Borexino are calculated. Our analysis features the use of exhaustive computation of the neutrino oscillation probabilities and the use of an improved statistical $\\chi^2$ minimization. In the framework of two neutrino oscillations we conclude that the best fit to the data is obtained in the LMA region with parameters $(\\Delta m^2, \\tan^2\\theta) = (5.2 \\times 10^{-5} \\eV^2, 0.47)$, ($\\chi^2_{min}/n=0.82$, $n=38$ degrees of freedom). Although less favored, solutions in the LOW and VAC regions are still possible with a reasonable statistical significance. The best possible solution in the SMA region gets as maximum a statistical significance as low as $\\sim 3%$. We study the implications of these results for the prospects of Borexino and the possibility of discriminating between the different solutions. The expected normalized...

  2. Ca analysis: an Excel based program for the analysis of intracellular calcium transients including multiple, simultaneous regression analysis.

    Science.gov (United States)

    Greensmith, David J

    2014-01-01

    Here I present an Excel based program for the analysis of intracellular Ca transients recorded using fluorescent indicators. The program can perform all the necessary steps which convert recorded raw voltage changes into meaningful physiological information. The program performs two fundamental processes. (1) It can prepare the raw signal by several methods. (2) It can then be used to analyze the prepared data to provide information such as absolute intracellular Ca levels. Also, the rates of change of Ca can be measured using multiple, simultaneous regression analysis. I demonstrate that this program performs equally well as commercially available software, but has numerous advantages, namely creating a simplified, self-contained analysis workflow. Copyright © 2013 The Author. Published by Elsevier Ireland Ltd.. All rights reserved.

  3. Combined effects of petrographic and technological parameters on strength of porous coke substance

    Energy Technology Data Exchange (ETDEWEB)

    Dinel' t, V.M.; Shkoller, M.B.; Stankevich, A.S.; Korchuganova, G.S.

    1983-09-01

    The proportion of coke in modern blast furnaces has been reduced and at the same time ore burdens have increased. The coke itself now derives from a much wider range of coals. Laboratory tests related to the structural strength of cokes were carried out with charges composed of 14 representative coals. Results showed that vitrinite reflectance and bulk density were the critical parameters, followed by petrographic composition. Increasing bulk density of the charge from 0.6 to 0.9 g/cm/sup 3/ produces coke with a structural strength which counteracts the effects of increasing diversity in both petrography and reflectance in any one charge.

  4. Earthquake analysis of structures including structure-soil interaction by a substructure method

    International Nuclear Information System (INIS)

    Chopra, A.K.; Guttierrez, J.A.

    1977-01-01

    A general substructure method for analysis of response of nuclear power plant structures to earthquake ground motion, including the effects of structure-soil interaction, is summarized. The method is applicable to complex structures idealized as finite element systems and the soil region treated as either a continuum, for example as a viscoelastic halfspace, or idealized as a finite element system. The halfspace idealization permits reliable analysis for sites where essentially similar soils extend to large depths and there is no rigid boundary such as soil-rock interface. For sites where layers of soft soil are underlain by rock at shallow depth, finite element idealization of the soil region is appropriate; in this case, the direct and substructure methods would lead to equivalent results but the latter provides the better alternative. Treating the free field motion directly as the earthquake input in the substructure method eliminates the deconvolution calculations and the related assumption -regarding type and direction of earthquake waves- required in the direct method. The substructure method is computationally efficient because the two substructures-the structure and the soil region- are analyzed separately; and, more important, it permits taking advantage of the important feature that response to earthquake ground motion is essentially contained in the lower few natural modes of vibration of the structure on fixed base. For sites where essentially similar soils extend to large depths and there is no obvious rigid boundary such as a soil-rock interface, numerical results for earthquake response of a nuclear reactor structure are presented to demonstrate that the commonly used finite element method may lead to unacceptable errors; but the substructure method leads to reliable results

  5. Piping failure analysis for the Korean nuclear piping including the effect of in-service inspection

    Energy Technology Data Exchange (ETDEWEB)

    Choi, S.Y. [Korea Atomic Energy Research Inst.(KAERI), Daejeon (Korea); Choi, Y.H. [Korea Inst. of Nuclear Safety(KINS), Daejeon (Korea)

    2004-07-01

    The purposes of this paper are to perform piping failure analysis for the failed safety class piping in Korean nuclear power plants(NPPs) and evaluate the effect of an in-service inspection(ISI) on the piping failure probability. For data collection, a database for piping failure events was constructed with 135 data fields including population data, event data, and service history data. A total of 6 kinds of events with 25 failure cases up to June 30, 2003 were identified from Korean NPPs. The failed systems were main feedwater system, CVCS, primary sampling system, essential service water system, and CANDU purification system. Piping failure analyses such as evaluation of the impact on nuclear safety and piping integrity and the root cause analysis were performed and the piping failure frequencies for the failed piping were calculated by using population data. The result showed that although the integrity was not maintained in the failed piping, the safety of the plants was maintained for all the events. And the root causes of the events were analyzed as FAC, vibration, thermal fatigue, corrosion, and/or an improper weld joint. The piping failure frequencies ranged from 6.08E-5/Cr-Yr to 1.15E-3/Cr-Yr for the events. According to the ASME Code sec. XI requirements, the small bore piping less than the nominal diameter of 4 inch is exempt from ISI. There, however, were many piping failures reported in the small bore piping. The effect of ISI considering the pipe size on the piping failure probability was investigated by using the Win-PRAISE program based on probabilistic fracture mechanics. The results showed that there is no significant difference between the small and large bore piping from the viewpoint of the ISI effect on the piping failure probability. It means that ISI for a small bore piping is recommended as well as the large bore piping. (orig.)

  6. Fossilization Type of Elephas hysudrindicus from Blora on the Basis of Petrographic and Scanning Electron Microscopic Analyses

    Directory of Open Access Journals (Sweden)

    Danny Z. Herman

    2014-06-01

    Full Text Available DOI: 10.17014/ijog.v6i2.117Either fossils of the hominid or vertebrate have long been known from terraces along the Solo River in Central and East Java. Most terraces consist of andesitic sand to andesitic tuffaceous sand with either gravelpebble or conglomerate and some of them contain vertebrate fossils. It is in this place, an ancient elephant fossil named Elephas hysudrindicus was discovered in 2009. This fossil was discovered at an abandoned sand quarry of Sunggun area, Medalem Village, Kradenan Subregency, Blora Regency which and can be mentioned as a great event for the Geological Museum. It was said as a phenomenal discovery, because the fossil was found within the terrace with condition of nearly complete skeleton of an individual elephant. Some bone fragments of Elephas hysudrindicus fossil is treated as rock specimens because a number of minerals fill in either pore spaces or cavities or cracks within bones, and such infilling minerals can be observed in cut sections of the bones. Main goals of the study are to determine the distribution and type of minerals within the bones, interpret environment of deposition, and identify fossilization type. The methodology used in this study consists of petrographic and Scanning Electron Microscopic (SEM analyses. Based on the petrographical observation, some bone specimens of Elephas hysudrindicus fossil are characterized by fibrous and porous feature with cracks occuring locally. Whilst, examination with SEM shows that the bone specimens are apparently composed of collophane or massive cryptocrystalline variety of apatite as the principal component of fossil bone, having physical characteristic of spheroidal structure and cavities of 100 to 1500 micron (μ in diameter. Most cavities and pore spaces are predominantly filled in by either authigenic crystals of rhombohedral calcite and lesser pseudohexagonal kaolinite with either slightly minerals of manganese oxide or iron oxide or ilmenite

  7. Performance analysis of the MHD-steam combined cycle, including the influence of cost

    Energy Technology Data Exchange (ETDEWEB)

    Berry, G. F.; Dennis, C. B.

    1980-08-01

    The MHD Systems group of the ANL Engineering Division is conducting overall system studies, utilizing the computer simulation code that has been developed at ANL. This analytical investigation is exploring a range of possible performance variables, in order to determine the sensitivity of a specific plant design to variation in key system parameters and, ultimately, to establish probable system performance limits. The comprehensive computer code that has been developed for this task will analyze and simulate an MHD power plant for any number of different configurations, and will hold constraints automatically while conducting either sensitivity studies or optimization. A summary of a sensitivity analysis conducted for a combined cycle, MHD-steam power plant is presented. The influence of several of the more important systems parameters were investigated in a systematic fashion, and the results are presented in graphical form. The report is divided into four sections. Following the introduction, the second section describes in detail the results of a validation study conducted to insure that the code is functioning correctly. The third section includes a description of the ANL cost algorithm and a detailed comparison between the ANL cost results and published OCMHD cost information. it is further demonstrated in this section that good agreement is obtained for the calculated cost of electricity. The fourth section is a sensitivity study and optimization for a specific OCMHD configuration over several key plant parameters.

  8. Information management for global environmental change, including the Carbon Dioxide Information Analysis Center

    Energy Technology Data Exchange (ETDEWEB)

    Stoss, F.W. [Oak Ridge National Lab., TN (United States). Carbon Dioxide Information Analysis Center

    1994-06-01

    The issue of global change is international in scope. A body of international organizations oversees the worldwide coordination of research and policy initiatives. In the US the National Science and Technology Council (NSTC) was established in November of 1993 to provide coordination of science, space, and technology policies throughout the federal government. NSTC is organized into nine proposed committees. The Committee on Environmental and Natural Resources (CERN) oversees the US Department of Energy`s Global Change Research Program (USGCRP). As part of the USGCRP, the US Department of Energy`s Global Change Research Program aims to improve the understanding of Earth systems and to strengthen the scientific basis for the evaluation of policy and government action in response to potential global environmental changes. This paper examines the information and data management roles of several international and national programs, including Oak Ridge National Laboratory`s (ORNL`s) global change information programs. An emphasis will be placed on the Carbon Dioxide Information Analysis Center (CDIAC), which also serves as the World Data Center-A for Atmospheric Trace Gases.

  9. Petrographic properties of major coal seams in Turkey and their formation

    Energy Technology Data Exchange (ETDEWEB)

    Toprak, Selami [Mineral Research and Exploration Directorate (MTA), 06520 Ankara (Turkey)

    2009-06-01

    Most types of coal in Turkey are generally low in rank: lignite, and subbituminous. Most of the coal was formed during the Miocene, Eocene, and Pliocene ages. There are only a few thin Jurassic-age coal occurrences in Turkey. Pennsylvanian age bituminous coal is found on the Black Sea coast. General implications of the petrographic properties of Turkey's coal seams and coal deposits have not yet been taken into consideration comparatively or as a whole. For this study, about 190 channel samples were collected from different locales. The composite profile samples of the seams were taken into considerations. The content and depositional properties as well as some chemical and physical properties of the main coal seams are compared. All coal samples tend to have similar coal petrographic properties and were deposited in intermontane lacustrine basins. Later, they were affected by faulting and post-depositional volcanic activity. As a result, there are variations in the properties and rank of the coal samples. The most abundant coal maceral group is huminite and the most abundant maceral is gelinite. The liptinite and inertinite contents of the coal are low and the maceral contents of the coals show great similarity. The depositional environments of the all coals are lacustrine dominated. (author)

  10. Analysis of advanced european nuclear fuel cycle scenarios including transmutation and economical estimates

    International Nuclear Information System (INIS)

    Merino Rodriguez, I.; Alvarez-Velarde, F.; Martin-Fuertes, F.

    2013-01-01

    In this work the transition from the existing Light Water Reactors (LWR) to the advanced reactors is analyzed, including Generation III+ reactors in a European framework. Four European fuel cycle scenarios involving transmutation options have been addressed. The first scenario (i.e., reference) is the current fleet using LWR technology and open fuel cycle. The second scenario assumes a full replacement of the initial fleet with Fast Reactors (FR) burning U-Pu MOX fuel. The third scenario is a modification of the second one introducing Minor Actinide (MA) transmutation in a fraction of the FR fleet. Finally, in the fourth scenario, the LWR fleet is replaced using FR with MOX fuel as well as Accelerator Driven Systems (ADS) for MA transmutation. All scenarios consider an intermediate period of GEN-III+ LWR deployment and they extend for a period of 200 years looking for equilibrium mass flows. The simulations were made using the TR-EVOL code, a tool for fuel cycle studies developed by CIEMAT. The results reveal that all scenarios are feasible according to nuclear resources demand (U and Pu). Concerning to no transmutation cases, the second scenario reduces considerably the Pu inventory in repositories compared to the reference scenario, although the MA inventory increases. The transmutation scenarios show that elimination of the LWR MA legacy requires on one hand a maximum of 33% fraction (i.e., a peak value of 26 FR units) of the FR fleet dedicated to transmutation (MA in MOX fuel, homogeneous transmutation). On the other hand a maximum number of ADS plants accounting for 5% of electricity generation are predicted in the fourth scenario (i.e., 35 ADS units). Regarding the economic analysis, the estimations show an increase of LCOE (Levelized cost of electricity) - averaged over the whole period - with respect to the reference scenario of 21% and 29% for FR and FR with transmutation scenarios respectively, and 34% for the fourth scenario. (authors)

  11. Petrographic characterization of Kentucky coals. Final report. Part IV. A petrographic and chemical model for the evolution of the Tradewater Formation coals in Western Kentucky

    Energy Technology Data Exchange (ETDEWEB)

    Graese, A.M.; Hower, J.C.; Ferm, J.C.

    1984-01-01

    A depositional model for the coals of the Tradewater Formation and associated rock units was constructed as a predictive device for the occurrence of economically important low sulfur coal. Twenty-one cores were examined and ninety-eight coal samples were analyzed for maceral, ash, and sulfur contents. These data were then analyzed to determine regional variation as well as vertical variation in single coal columns. Core data indicate that the majority of the Tradewater rocks consist of irregularly distributed, coarsening-upward, fine-grained detrital material which was deposited in shallow bodies of water. Minor fossiliferous shales and limestones suggest a marine influence. Less common coarse-grained, fining-upward sequences appear to be deposits of meandering channels. Like the detrital rocks, the coal seams are also irregularly distributed and exhibit variable petrographic and chemical properties reflecting changes in the Eh and pH of the coal swamp waters as well as detrital influx into the swamps. These swamps were relatively limited in extent and probably occupied the upper reaches of the tidal zone. The lack of significant stratigraphic and geographic trends in the regional data suggests that this mode of deposition was widespread and continued for a long period of time. 42 references, 19 figures, 9 tables.

  12. A systematic review including meta-analysis of work environment and depressive symptoms.

    Science.gov (United States)

    Theorell, Töres; Hammarström, Anne; Aronsson, Gunnar; Träskman Bendz, Lil; Grape, Tom; Hogstedt, Christer; Marteinsdottir, Ina; Skoog, Ingmar; Hall, Charlotte

    2015-08-01

    Depressive symptoms are potential outcomes of poorly functioning work environments. Such symptoms are frequent and cause considerable suffering for the employees as well as financial loss for the employers. Accordingly good prospective studies of psychosocial working conditions and depressive symptoms are valuable. Scientific reviews of such studies have pointed at methodological difficulties but still established a few job risk factors. Those reviews were published some years ago. There is need for an updated systematic review using the GRADE system. In addition, gender related questions have been insufficiently reviewed. Inclusion criteria for the studies published 1990 to June 2013: 1. European and English speaking countries. 2. Quantified results describing the relationship between exposure (psychosocial or physical/chemical) and outcome (standardized questionnaire assessment of depressive symptoms or interview-based clinical depression). 3. Prospective or comparable case-control design with at least 100 participants. 4. Assessments of exposure (working conditions) and outcome at baseline and outcome (depressive symptoms) once again after follow-up 1-5 years later. 5. Adjustment for age and adjustment or stratification for gender. Studies filling inclusion criteria were subjected to assessment of 1.) relevance and 2.) quality using predefined criteria. Systematic review of the evidence was made using the GRADE system. When applicable, meta-analysis of the magnitude of associations was made. Consistency of findings was examined for a number of possible confounders and publication bias was discussed. Fifty-nine articles of high or medium high scientific quality were included. Moderately strong evidence (grade three out of four) was found for job strain (high psychological demands and low decision latitude), low decision latitude and bullying having significant impact on development of depressive symptoms. Limited evidence (grade two) was shown for psychological

  13. Requirement analysis for citizen observatories (including stakeholder sensor adoption and usage). D6.21

    OpenAIRE

    McCarthy, Simon; Tapsell, Sue M.; McDonagh, Rosalind; Vita, Lanfranchi; Kim, Anema; Uta, Wehn de Montalvo

    2014-01-01

    This document presents the report on the initial requirements analysis for citizen observatories of water that are designed, developed and implemented during the WeSenseIt project. The observatories will be tested in three distinct case study locations: Doncaster (UK), Delfland (NL) and Alto Adriatico (Italy). The report focuses on the initial requirements analysis of stakeholders in terms of their preferences for the technological components of the citizen observatory for the design and use ...

  14. Probabilistic and deterministic soil structure interaction analysis including ground motion incoherency effects

    Energy Technology Data Exchange (ETDEWEB)

    Elkhoraibi, T., E-mail: telkhora@bechtel.com; Hashemi, A.; Ostadan, F.

    2014-04-01

    Soil-structure interaction (SSI) is a major step for seismic design of massive and stiff structures typical of the nuclear facilities and civil infrastructures such as tunnels, underground stations, dams and lock head structures. Currently most SSI analyses are performed deterministically, incorporating limited range of variation in soil and structural properties and without consideration of the ground motion incoherency effects. This often leads to overestimation of the seismic response particularly the In-Structure-Response Spectra (ISRS) with significant impositions of design and equipment qualification costs, especially in the case of high-frequency sensitive equipment at stiff soil or rock sites. The reluctance to incorporate a more comprehensive probabilistic approach is mainly due to the fact that the computational cost of performing probabilistic SSI analysis even without incoherency function considerations has been prohibitive. As such, bounding deterministic approaches have been preferred by the industry and accepted by the regulatory agencies. However, given the recently available and growing computing capabilities, the need for a probabilistic-based approach to the SSI analysis is becoming clear with the advances in performance-based engineering and the utilization of fragility analysis in the decision making process whether by the owners or the regulatory agencies. This paper demonstrates the use of both probabilistic and deterministic SSI analysis techniques to identify important engineering demand parameters in the structure. A typical nuclear industry structure is used as an example for this study. The system is analyzed for two different site conditions: rock and deep soil. Both deterministic and probabilistic SSI analysis approaches are performed, using the program SASSI, with and without ground motion incoherency considerations. In both approaches, the analysis begins at the hard rock level using the low frequency and high frequency hard rock

  15. Static aeroelastic analysis including geometric nonlinearities based on reduced order model

    Directory of Open Access Journals (Sweden)

    Changchuan Xie

    2017-04-01

    Full Text Available This paper describes a method proposed for modeling large deflection of aircraft in nonlinear aeroelastic analysis by developing reduced order model (ROM. The method is applied for solving the static aeroelastic and static aeroelastic trim problems of flexible aircraft containing geometric nonlinearities; meanwhile, the non-planar effects of aerodynamics and follower force effect have been considered. ROMs are computational inexpensive mathematical representations compared to traditional nonlinear finite element method (FEM especially in aeroelastic solutions. The approach for structure modeling presented here is on the basis of combined modal/finite element (MFE method that characterizes the stiffness nonlinearities and we apply that structure modeling method as ROM to aeroelastic analysis. Moreover, the non-planar aerodynamic force is computed by the non-planar vortex lattice method (VLM. Structure and aerodynamics can be coupled with the surface spline method. The results show that both of the static aeroelastic analysis and trim analysis of aircraft based on structure ROM can achieve a good agreement compared to analysis based on the FEM and experimental result.

  16. The total assessment profile, volume 2. [including societal impact, cost effectiveness, and economic analysis

    Science.gov (United States)

    Leininger, G.; Jutila, S.; King, J.; Muraco, W.; Hansell, J.; Lindeen, J.; Franckowiak, E.; Flaschner, A.

    1975-01-01

    Appendices are presented which include discussions of interest formulas, factors in regionalization, parametric modeling of discounted benefit-sacrifice streams, engineering economic calculations, and product innovation. For Volume 1, see .

  17. Selection Component Analysis of Natural Polymorphisms using Population Samples Including Mother-Offspring Combinations, II

    DEFF Research Database (Denmark)

    Jarmer, Hanne Østergaard; Christiansen, Freddy Bugge

    1981-01-01

    Population samples including mother-offspring combinations provide information on the selection components: zygotic selection, sexual selection, gametic seletion and fecundity selection, on the mating pattern, and on the deviation from linkage equilibrium among the loci studied. The theory...

  18. MetaComp: comprehensive analysis software for comparative meta-omics including comparative metagenomics.

    Science.gov (United States)

    Zhai, Peng; Yang, Longshu; Guo, Xiao; Wang, Zhe; Guo, Jiangtao; Wang, Xiaoqi; Zhu, Huaiqiu

    2017-10-02

    During the past decade, the development of high throughput nucleic sequencing and mass spectrometry analysis techniques have enabled the characterization of microbial communities through metagenomics, metatranscriptomics, metaproteomics and metabolomics data. To reveal the diversity of microbial communities and interactions between living conditions and microbes, it is necessary to introduce comparative analysis based upon integration of all four types of data mentioned above. Comparative meta-omics, especially comparative metageomics, has been established as a routine process to highlight the significant differences in taxon composition and functional gene abundance among microbiota samples. Meanwhile, biologists are increasingly concerning about the correlations between meta-omics features and environmental factors, which may further decipher the adaptation strategy of a microbial community. We developed a graphical comprehensive analysis software named MetaComp comprising a series of statistical analysis approaches with visualized results for metagenomics and other meta-omics data comparison. This software is capable to read files generated by a variety of upstream programs. After data loading, analyses such as multivariate statistics, hypothesis testing of two-sample, multi-sample as well as two-group sample and a novel function-regression analysis of environmental factors are offered. Here, regression analysis regards meta-omic features as independent variable and environmental factors as dependent variables. Moreover, MetaComp is capable to automatically choose an appropriate two-group sample test based upon the traits of input abundance profiles. We further evaluate the performance of its choice, and exhibit applications for metagenomics, metaproteomics and metabolomics samples. MetaComp, an integrative software capable for applying to all meta-omics data, originally distills the influence of living environment on microbial community by regression analysis

  19. Isotope-geochemical and mineralogical-petrographic characteristics of the pergamon altar marble.

    Science.gov (United States)

    Cramer, T; Germann, K; Winkler, F J; Schmidt, H L

    1997-07-01

    Abstract We report preliminary results of our provenance study of marble from the Telephos Frieze of the Pergamon altar. The emphasis here is on the stable isotope geochemistry of marble. The obtained δ(13)C values (2.4 to 3.5‰) vary insignificantly. However, the δ(18)O values give two clusters. The isotopically light marbles (close to -9.5‰) derive from panels 1-8 and the heavy marbles (-3.5 to -1.0‰) derive from panels 11-50. Mineralogical, petrographic and geochemical investigations (accessory minerals, grain size distribution, rare earth elements) further refined the marble characteristics. In spite of certain differences observed (grain size distributions, isotopy and contents of certain elements) for the two marble groups, the present data support a common provenance. So far, east Aegean islands and the Marmara region are favored.

  20. Mineralogical and petrographic investigations at Strasbourg on the Oklo natural reactors

    International Nuclear Information System (INIS)

    Gauthier-Lafaye, F.; Weber, F.

    1978-01-01

    Petrographic and mineralogical investigations have revealed the presence around the reaction zones of aureoles characterized by the nature of the phyllitic minerals which they enclose. Running from the outside towards the core, these are: illite 1Md and ferriferous chlorite (normal sediment), illite 2M 1 , magnesium chlorite and kaolinite, illite 1M and vermiculite chlorite. Detritic quartz dissolution figures are observed which disappear in the illite 2M aureole or in the magnesium chlorite aureole, depending on the degree of sandiness of the country rock. This zonal stucture could be attributable to the combined effect of neutron bombardment and hydrothermal alteration due to the action of a thermal syphon triggered off by the nuclear reactions. (author)

  1. Dipole model analysis of highest precision HERA data, including very low Q2's

    International Nuclear Information System (INIS)

    Luszczak, A.; Kowalski, H.

    2016-12-01

    We analyse, within a dipole model, the final, inclusive HERA DIS cross section data in the low χ region, using fully correlated errors. We show, that these highest precision data are very well described within the dipole model framework starting from Q 2 values of 3.5 GeV 2 to the highest values of Q 2 =250 GeV 2 . To analyze the saturation effects we evaluated the data including also the very low 0.35including this region show a preference of the saturation ansatz.

  2. Analysis: including visually impaired participants in validation design studies of diabetes technology.

    Science.gov (United States)

    Uslan, Mark; Blubaugh, Morgan

    2010-09-01

    In an article in this issue of Journal of Diabetes Science and Technology, Sherwyn Schwartz, M.D., presents a study to validate the design of the ClikSTAR® insulin pen from sanofi-aventis and demonstrates that the device can be used correctly by participants with diabetes. Concern with this article lies with the selection of participants, which was meant to reflect the intended audience for the insulin pen device but does not address the inclusion of visually impaired individuals, who comprise over 20% of the adult diabetes population. Visually impaired individuals need to be included as part of the intended audience for insulin administration technology, and manufacturers of these devices need to design their products for safe use by all people, including those who are visually impaired. The study demonstrated successful use of the ClikSTAR insulin pen in a population that did not include subjects with severe visual impairment. We believe that future validation studies for insulin administration technology should also include samples of visually impaired users and that visually impaired patients will embrace the use of insulin pens designed with their needs in mind. © 2010 Diabetes Technology Society.

  3. A Comparative Analysis regarding Pictures Included in Secondary School Geography Textbooks Taught in Turkey

    Science.gov (United States)

    Yasar, Okan; Seremet, Mehmet

    2007-01-01

    This study brings in a comparative approach regarding pictures involved in secondary school (14-17 ages) textbooks taught in Turkey. In this respect, following the classification of pictures (line drawings and photographs) included in secondary school education geography textbooks, evaluation of the photographs in books in question in terms of…

  4. Including health economic analysis in pilot studies: lessons learned from a cost-utility analysis within the PROSPECTIV pilot study

    Directory of Open Access Journals (Sweden)

    Richéal M. Burns

    2017-07-01

    Full Text Available PurposeTo assess feasibility and health economic benefits and costs as part of a pilot study for a nurse-led, psychoeducational intervention (NPLI for prostate cancer in order to understand the potential for cost effectiveness as well as contribute to the design of a larger scale trial.MethodsMen with stable prostate cancer post-treatment were recruited from two cancer centres in the UK. Eighty-three men were randomised to the NLPI plus usual care or usual care alone (UCA (42 NLPI and 41 UCA; the NLPI plus usual care was delivered in the primary-care setting (the intervention and included an initial face-to-face consultation with a trained nurse, with follow-up tailored to individual needs. The study afforded the opportunity to undertake a short-term within pilot analysis. The primary outcome measure for the economic evaluation was quality of life, as measured by the EuroQol five dimensions questionnaire (EQ-5D (EQ-5D-5L instrument. Costs (£2014 assessed included health-service resource use, out-of-pocket expenses and losses from inability to undertake usual activities.ResultsTotal and incremental costs varied across the different scenarios assessed, with mean cost differences ranging from £173 to £346; incremental effect, as measured by the change in utility scores over the duration of follow-up, exhibited wide confidence intervals highlighting inconclusive effectiveness (95% CI: -0.0226; 0.0438. The cost per patient of delivery of the intervention would be reduced if rolled out to a larger patient cohort.ConclusionsThe NLPI is potentially cost saving depending on the scale of delivery; however, the results presented are not considered generalisable.

  5. Integrative Analysis of Gene Expression Data Including an Assessment of Pathway Enrichment for Predicting Prostate Cancer

    Directory of Open Access Journals (Sweden)

    Pingzhao Hu

    2006-01-01

    Full Text Available Background: Microarray technology has been previously used to identify genes that are differentially expressed between tumour and normal samples in a single study, as well as in syntheses involving multiple studies. When integrating results from several Affymetrix microarray datasets, previous studies summarized probeset-level data, which may potentially lead to a loss of information available at the probe-level. In this paper, we present an approach for integrating results across studies while taking probe-level data into account. Additionally, we follow a new direction in the analysis of microarray expression data, namely to focus on the variation of expression phenotypes in predefined gene sets, such as pathways. This targeted approach can be helpful for revealing information that is not easily visible from the changes in the individual genes. Results: We used a recently developed method to integrate Affymetrix expression data across studies. The idea is based on a probe-level based test statistic developed for testing for differentially expressed genes in individual studies. We incorporated this test statistic into a classic random-effects model for integrating data across studies. Subsequently, we used a gene set enrichment test to evaluate the significance of enriched biological pathways in the differentially expressed genes identified from the integrative analysis. We compared statistical and biological significance of the prognostic gene expression signatures and pathways identified in the probe-level model (PLM with those in the probeset-level model (PSLM. Our integrative analysis of Affymetrix microarray data from 110 prostate cancer samples obtained from three studies reveals thousands of genes significantly correlated with tumour cell differentiation. The bioinformatics analysis, mapping these genes to the publicly available KEGG database, reveals evidence that tumour cell differentiation is significantly associated with many

  6. Analysis of Nature of Science Included in Recent Popular Writing Using Text Mining Techniques

    Science.gov (United States)

    Jiang, Feng; McComas, William F.

    2014-09-01

    This study examined the inclusion of nature of science (NOS) in popular science writing to determine whether it could serve supplementary resource for teaching NOS and to evaluate the accuracy of text mining and classification as a viable research tool in science education research. Four groups of documents published from 2001 to 2010 were analyzed: Scientific American, Discover magazine, winners of the Royal Society Winton Prize for Science Books, and books from NSTA's list of Outstanding Science Trade Books. Computer analysis categorized passages in the selected documents based on their inclusions of NOS. Human analysis assessed the frequency, context, coverage, and accuracy of the inclusions of NOS within computer identified NOS passages. NOS was rarely addressed in selected document sets but somewhat more frequently addressed in the letters section of the two magazines. This result suggests that readers seem interested in the discussion of NOS-related themes. In the popular science books analyzed, NOS presentations were found more likely to be aggregated in the beginning and the end of the book, rather than scattered throughout. The most commonly addressed NOS elements in the analyzed documents are science and society and empiricism in science. Only one inaccurate presentation of NOS were identified in all analyzed documents. The text mining technique demonstrated exciting performance, which invites more applications of the technique to analyze other aspects of science textbooks, popular science writing, or other materials involved in science teaching and learning.

  7. Portfolio of prospective clinical trials including brachytherapy: an analysis of the ClinicalTrials.gov database

    International Nuclear Information System (INIS)

    Cihoric, Nikola; Tsikkinis, Alexandros; Miguelez, Cristina Gutierrez; Strnad, Vratislav; Soldatovic, Ivan; Ghadjar, Pirus; Jeremic, Branislav; Dal Pra, Alan; Aebersold, Daniel M.; Lössl, Kristina

    2016-01-01

    To evaluate the current status of prospective interventional clinical trials that includes brachytherapy (BT) procedures. The records of 175,538 (100 %) clinical trials registered at ClinicalTrials.gov were downloaded on September 2014 and a database was established. Trials using BT as an intervention were identified for further analyses. The selected trials were manually categorized according to indication(s), BT source, applied dose rate, primary sponsor type, location, protocol initiator and funding source. We analyzed trials across 8 available trial protocol elements registered within the database. In total 245 clinical trials were identified, 147 with BT as primary investigated treatment modality and 98 that included BT as an optional treatment component or as part of the standard treatment. Academic centers were the most frequent protocol initiators in trials where BT was the primary investigational treatment modality (p < 0.01). High dose rate (HDR) BT was the most frequently investigated type of BT dose rate (46.3 %) followed by low dose rate (LDR) (42.0 %). Prostate was the most frequently investigated tumor entity in trials with BT as the primary treatment modality (40.1 %) followed by breast cancer (17.0 %). BT was rarely the primary investigated treatment modality for cervical cancer (6.8 %). Most clinical trials using BT are predominantly in early phases, investigator-initiated and with low accrual numbers. Current investigational activities that include BT mainly focus on prostate and breast cancers. Important questions concerning the optimal usage of BT will not be answered in the near future. The online version of this article (doi:10.1186/s13014-016-0624-8) contains supplementary material, which is available to authorized users

  8. Stress analysis of fuel claddings with axial fins including creep effects

    International Nuclear Information System (INIS)

    Krieg, R.

    1977-01-01

    For LMFBR fuel claddings with axial fins the stress and strain fields are calculated which may be caused by internal pressure, differential thermal expansion and irradiation induced differential swelling. To provide an appropriate description of the cladding material it is assumed that the total strain is the sum of a linear elastic and a creep term, where the latter one includes the thermal as well as the irradiation induced creep. First the linear elastic problem is treated by a semi-analytical method leading to a bipotential equation for Airys' stress function. Solving this equation analytically means that the field equations valid within the cladding are satisfied exactly. By applying a combined point matching- least square-method the boundary conditions could be satisfied approximately such that in most cases the remaining error is within the uncertainty range of the loading conditions. Then the nonlinear problem which includes creep is approximated by a sequence of linear elastic solutions with time as parameter. The accumulated creep strain is treated here as an imposed strain field. To study the influence of different effects such as fin shape, temperature region, irradiation induced creep and swelling or internal pressure, a total of eleven cases with various parameter variations are investigated. The results are presented graphically in the following forms: stress and strain distributions over the cladding cross section for end of life conditions and boundary stresses and strains versus time. (Auth.)

  9. Dynamic Analysis of Thick Plates Including Deep Beams on Elastic Foundations Using Modified Vlasov Model

    Directory of Open Access Journals (Sweden)

    Korhan Ozgan

    2013-01-01

    Full Text Available Dynamic analysis of foundation plate-beam systems with transverse shear deformation is presented using modified Vlasov foundation model. Finite element formulation of the problem is derived by using an 8-node (PBQ8 finite element based on Mindlin plate theory for the plate and a 2-node Hughes element based on Timoshenko beam theory for the beam. Selective reduced integration technique is used to avoid shear locking problem for the evaluation of the stiffness matrices for both the elements. The effect of beam thickness, the aspect ratio of the plate and subsoil depth on the response of plate-beam-soil system is analyzed. Numerical examples show that the displacement, bending moments and shear forces are changed significantly by adding the beams.

  10. [Hypersexual disorder will not be included in the DSM V : a contextual analysis].

    Science.gov (United States)

    Toussaint, I; Pitchot, W

    2013-01-01

    Hypersexuality disorder has not been added to the list of psychiatric disorders for the Diagnostic and Statistical Manual of Mental Disorders (DSM) V, to be published in May 2013. The evolution of the concept of hypersexuality disorder and its series of different models call into question the controversial context within which its inclusion is considered for the DSM V. A brief contextual analysis makes clear that the creation of this concept follows moral norms and psychosocial values. The construction of hypersexuality disorder in terms of a diagnostic entity rests on the clash of social forces at play in the development process. This article lays the foundation to contemplate the manner in which entities for psychiatric disorders are constructed.

  11. Performance analysis of the MHD-steam combined cycle, including the influence of cost

    Science.gov (United States)

    Berry, G. F.; Dennis, C. B.

    1980-08-01

    A range of possible performance variables is explored in order to determine the sensitivity of a specific plant design to variation in key system parameters and, ultimately, to establish probable system performance limits. The comprehensive computer code that was developed analyzes and simulates an MHD plant for any number of different configurations, and holds constraints automatically while conducting either sensitivity studies or optimization. A summary of a sensitivity analysis conducted for a combined cycle, MHD steam power plant is presented. The influence of several of the more important system parameters were investigated and the results are presented in graphical form. The ANL cost algorithm is described and it is demonstrated that good agreement is obtained for the calculated cost of electricity.

  12. SAXS analysis of a soluble cytosolic NgBR construct including extracellular and transmembrane domains.

    Directory of Open Access Journals (Sweden)

    Joshua Holcomb

    Full Text Available The Nogo-B receptor (NgBR is involved in oncogenic Ras signaling through directly binding to farnesylated Ras. It recruits farnesylated Ras to the non-lipid-raft membrane for interaction with downstream effectors. However, the cytosolic domain of NgBR itself is only partially folded. The lack of several conserved secondary structural elements makes this domain unlikely to form a complete farnesyl binding pocket. We find that inclusion of the extracellular and transmembrane domains that contain additional conserved residues to the cytosolic region results in a well folded protein with a similar size and shape to the E.coli cis-isoprenyl transferase (UPPs. Small Angle X-ray Scattering (SAXS analysis reveals the radius of gyration (Rg of our NgBR construct to be 18.2 Å with a maximum particle dimension (Dmax of 61.0 Å. Ab initio shape modeling returns a globular molecular envelope with an estimated molecular weight of 23.0 kD closely correlated with the calculated molecular weight. Both Kratky plot and pair distribution function of NgBR scattering reveal a bell shaped peak which is characteristic of a single globularly folded protein. In addition, circular dichroism (CD analysis reveals that our construct has the secondary structure contents similar to the UPPs. However, this result does not agree with the currently accepted topological orientation of NgBR which might partition this construct into three separate domains. This discrepancy suggests another possible NgBR topology and lends insight into a potential molecular basis of how NgBR facilitates farnesylated Ras recruitment.

  13. Including Health in Environmental Assessments of Major Transport Infrastructure Projects: A Documentary Analysis.

    Science.gov (United States)

    Riley, Emily; Harris, Patrick; Kent, Jennifer; Sainsbury, Peter; Lane, Anna; Baum, Fran

    2018-05-10

    Transport policy and practice impacts health. Environmental Impact Assessments (EIAs) are regulated public policy mechanisms that can be used to consider the health impacts of major transport projects before they are approved. The way health is considered in these environmental assessments (EAs) is not well known. This research asked: How and to what extent was human health considered in EAs of four major transport projects in Australia. We developed a comprehensive coding framework to analyse the Environmental Impact Statements (EISs) of four transport infrastructure projects: three road and one light rail. The coding framework was designed to capture how health was directly and indirectly included. We found that health was partially considered in all four EISs. In the three New South Wales (NSW) projects, but not the one South Australian project, this was influenced by the requirements issued to proponents by the government which directed the content of the EIS. Health was assessed using human health risk assessment (HHRA). We found this to be narrow in focus and revealed a need for a broader social determinants of health approach, using multiple methods. The road assessments emphasised air quality and noise risks, concluding these were minimal or predicted to improve. The South Australian project was the only road project not to include health data explicitly. The light rail EIS considered the health benefits of the project whereas the others focused on risk. Only one project considered mental health, although in less detail than air quality or noise. Our findings suggest EIAs lag behind the known evidence linking transport infrastructure to health. If health is to be comprehensively included, a more complete model of health is required, as well as a shift away from health risk assessment as the main method used. This needs to be mandatory for all significant developments. We also found that considering health only at the EIA stage may be a significant

  14. Including Health in Environmental Assessments of Major Transport Infrastructure Projects: A Documentary Analysis

    Directory of Open Access Journals (Sweden)

    Emily Riley

    2018-02-01

    Full Text Available Background Transport policy and practice impacts health. Environmental Impact Assessments (EIAs are regulated public policy mechanisms that can be used to consider the health impacts of major transport projects before they are approved. The way health is considered in these environmental assessments (EAs is not well known. This research asked: How and to what extent was human health considered in EAs of four major transport projects in Australia. Methods We developed a comprehensive coding framework to analyse the Environmental Impact Statements (EISs of four transport infrastructure projects: three road and one light rail. The coding framework was designed to capture how health was directly and indirectly included. Results We found that health was partially considered in all four EISs. In the three New South Wales (NSW projects, but not the one South Australian project, this was influenced by the requirements issued to proponents by the government which directed the content of the EIS. Health was assessed using human health risk assessment (HHRA. We found this to be narrow in focus and revealed a need for a broader social determinants of health approach, using multiple methods. The road assessments emphasised air quality and noise risks, concluding these were minimal or predicted to improve. The South Australian project was the only road project not to include health data explicitly. The light rail EIS considered the health benefits of the project whereas the others focused on risk. Only one project considered mental health, although in less detail than air quality or noise. Conclusion Our findings suggest EIAs lag behind the known evidence linking transport infrastructure to health. If health is to be comprehensively included, a more complete model of health is required, as well as a shift away from health risk assessment as the main method used. This needs to be mandatory for all significant developments. We also found that considering health

  15. Petrographic characterization to build an accurate rock model using micro-CT: Case study on low-permeable to tight turbidite sandstone from Eocene Shahejie Formation.

    Science.gov (United States)

    Munawar, Muhammad Jawad; Lin, Chengyan; Cnudde, Veerle; Bultreys, Tom; Dong, Chunmei; Zhang, Xianguo; De Boever, Wesley; Zahid, Muhammad Aleem; Wu, Yuqi

    2018-03-26

    Pore scale flow simulations heavily depend on petrographic characterizing and modeling of reservoir rocks. Mineral phase segmentation and pore network modeling are crucial stages in micro-CT based rock modeling. The success of the pore network model (PNM) to predict petrophysical properties relies on image segmentation, image resolution and most importantly nature of rock (homogenous, complex or microporous). The pore network modeling has experienced extensive research and development during last decade, however the application of these models to a variety of naturally heterogenous reservoir rock is still a challenge. In this paper, four samples from a low permeable to tight sandstone reservoir were used to characterize their petrographic and petrophysical properties using high-resolution micro-CT imaging. The phase segmentation analysis from micro-CT images shows that 5-6% microporous regions are present in kaolinite rich sandstone (E3 and E4), while 1.7-1.8% are present in illite rich sandstone (E1 and E2). The pore system percolates without micropores in E1 and E2 while it does not percolate without micropores in E3 and E4. In E1 and E2, total MICP porosity is equal to the volume percent of macrospores determined from micro-CT images, which indicate that the macropores are well connected and microspores do not play any role in non-wetting fluid (mercury) displacement process. Whereas in E3 and E4 sandstones, the volume percent of micropores is far less (almost 50%) than the total MICP porosity which means that almost half of the pore space was not detected by the micro-CT scan. PNM behaved well in E1 and E2 where better agreement exists in PNM and MICP measurements. While E3 and E4 exhibit multiscale pore space which cannot be addressed with single scale PNM method, a multiscale approach is needed to characterize such complex rocks. This study provides helpful insights towards the application of existing micro-CT based petrographic characterization methodology

  16. PTAC: a computer program for pressure-transient analysis, including the effects of cavitation. [LMFBR

    Energy Technology Data Exchange (ETDEWEB)

    Kot, C A; Youngdahl, C K

    1978-09-01

    PTAC was developed to predict pressure transients in nuclear-power-plant piping systems in which the possibility of cavitation must be considered. The program performs linear or nonlinear fluid-hammer calculations, using a fixed-grid method-of-characteristics solution procedure. In addition to pipe friction and elasticity, the program can treat a variety of flow components, pipe junctions, and boundary conditions, including arbitrary pressure sources and a sodium/water reaction. Essential features of transient cavitation are modeled by a modified column-separation technique. Comparisons of calculated results with available experimental data, for a simple piping arrangement, show good agreement and provide validation of the computational cavitation model. Calculations for a variety of piping networks, containing either liquid sodium or water, demonstrate the versatility of PTAC and clearly show that neglecting cavitation leads to erroneous predictions of pressure-time histories.

  17. Numerical analysis of trajectories and aberrations of a Wien filter including the effect of fringing fields

    Science.gov (United States)

    Kato, Makoto; Tsuno, Katsushige

    1990-12-01

    Trajectory equations of a stigmatic Wien filter including the effects of unmatched fringing fields are formulated, and an optimum shape with minimum geometrical aberrations is described. A low-aberration Wien filter is realized under the following conditions: (1) electric and magnetic fields satisfy the orthogonal relation even in the off-axial region, and (2) gap lengths between electrodes and magnetic poles are the same for achieving the balancing condition of electric and magnetic forces in fringing regions. The former condition can be realized by both fields with finite but the same hexapole components; this fact enables us to design a filter with simplified geometry that fulfills the latter condition simultaneously. It is shown that a large deflection of trajectories and resultant aberrations appear if the gap lengths are set to be different.

  18. Analysis of electronic models for solar cells including energy resolved defect densities

    Energy Technology Data Exchange (ETDEWEB)

    Glitzky, Annegret

    2010-07-01

    We introduce an electronic model for solar cells including energy resolved defect densities. The resulting drift-diffusion model corresponds to a generalized van Roosbroeck system with additional source terms coupled with ODEs containing space and energy as parameters for all defect densities. The system has to be considered in heterostructures and with mixed boundary conditions from device simulation. We give a weak formulation of the problem. If the boundary data and the sources are compatible with thermodynamic equilibrium the free energy along solutions decays monotonously. In other cases it may be increasing, but we estimate its growth. We establish boundedness and uniqueness results and prove the existence of a weak solution. This is done by considering a regularized problem, showing its solvability and the boundedness of its solutions independent of the regularization level. (orig.)

  19. Transient analysis of heat and mass transfer during heat treatment of wood including pressure equation

    Directory of Open Access Journals (Sweden)

    Younsi Ramdane

    2015-01-01

    Full Text Available In the present paper, three-dimensional equations for coupled heat and mass conservation equations for wood are solved to study the transient heat and mass transfer during high thermal treatment of wood. The model is based on Luikov’s approach, including pressure. The model equations are solved numerically by the commercial package FEMLfor the temperature and moisture content histories under different treatment conditions. The simulation of the proposed conjugate problem allows the assessment of the effect of the heat and mass transfer within wood. A parametric study was also carried out to determine the effects of several parameters such as initial moisture content and the sample thickness on the temperature, pressure and moisture content distributions within the samples during heat treatment.

  20. Dynamic analysis of liquid storage tank including hydrodynamic interaction by boundary element method

    International Nuclear Information System (INIS)

    Hwang, I.T.; Ting, K.

    1987-01-01

    Dynamic response of liquid storage tanks considering the hydrodynamic interactions due to earthquake ground motion has been extensively studied. Several finite element procedures, such as Balendra et. al. (1982) and Haroun (1983), have been devoted to investigate the dynamic interaction between the deformable wall of the tank and the liquid. Further, if the geometry of the storage tank can not be described by axi-symmetric case, the tank wall and the fluid domain must be discretized by three dimensional finite elements to investigate the fluid-structure-interactions. Thus, the need of large computer memory and expense of vast computer time usually make this analysis impractical. To demonstrate the accuracy and reliability of the solution technique developed herein, the dynamic behavior of ground-supported, deformed, cylindrical tank with incompressible fluid conducted by Haroun (1983) are analyzed. Good correlations of hydrodynamic pressure distribution between the computed results with the referenced solutions are noted. The fluid compressibility significantly affects the hydrodynamic pressures of the liquid-tank-interactions and the work which is done on this discussion is still little attention. Thus, the influences of the compressibility of the liquid on the reponse of the liquid storage due to ground motion are then drawn. By the way, the complex-valued frequency response functions for hydrodynamic forces of Haroun's problem are also displayed. (orig./GL)

  1. Behavioral analysis of preterm neonates included in a tactile and kinesthetic stimulation program during hospitalization.

    Science.gov (United States)

    Ferreira, Andréia M; Bergamasco, Niélsy H P

    2010-01-01

    To evaluate the effect of tactile and kinesthetic stimulation on behavioral and clinical development in preterm neonates while still in the hospital. Thirty-two clinically stable preterm infants weighing kinesthetic stimulation (n=16). Data on the infants' clinical progress were collected from medical charts and behavioral evaluations by means of a series of weekly, eight-minute films recorded from the time of inclusion into the study until hospital discharge. There was a trend towards a shorter duration of hospital stay, increased daily weight gain and a predominance of self-regulated behavior (regular breathing, state of alertness, balanced tonus, a range of postures, coordinated movements, hand-to-face movement control, suction, grip, support) in infants in the SG. With respect to motor control, comparative analysis of postconceptional ages according to age-bracket (I - 31-33 weeks 6/7; II - 34-36 weeks 6/7; and III - 37-39 weeks 6/7) revealed balanced tonus and coordinated voluntary movements in all three periods, a longer time spent in a range of postures (age bracket I) or in flexion (age bracket II) and more regular breathing in age bracket I in the SG. In the hospital, tactile and kinesthetic stimulation was shown to have a positive effect, contributing towards adjustment and self-regulation of behavior in the preterm newborn infant. Article registered in the Australian New Zealand Clinical Trials Registry (ANZCTR) under the number ACTRN12610000133033.

  2. Geochemical, petrographic and physical characterizations and associated alterations of the volcanic rocks of the Romanesque San Nicola Church (Ottana, central Sardinia, Italy)

    Science.gov (United States)

    Columbu, Stefano; Palomba, Marcella; Sitzia, Fabio

    2015-04-01

    In this research, the volcanic rocks belonging to the Sardinia Oligo-Miocene volcanic cycle (32 - 11 Ma) and building up the structure of the San Nicola church, one of the most representative churches of the Romanesque architecture, were studied. These stones were widely used in medieval architecture for the excellent workability, but they present some disadvantages, since they are greatly affected by alteration phenomena. The main objectives of this research are i) to focus the mineral, chemical and petrographic compositions of the San Nicola stones, ii) the chemical and physical alteration processes affecting these materials, and iii) to establish the exactly provenance of the volcanic rocks. Furthermore, a comparative study between the rocks from the ancient quarries and those forming the structure of the church was performed. In the ancient quarries, where presumably a more advanced alteration occurs due to the vertical alteration gradient, different facies of the same volcanic lithology, characterized by macroscopical evidences of chemical-physical degradation degree, were sampled. Petrographic, geochemical (both major elements that the traces) and physical-mechanical features of the collected samples were determined to highlight the compositional differences (density, porosity, water-absorption kinetics, mechanical resistance) as a function of the different alteration degree. Moreover, chemical-mineralogical analysis of the sample surfaces from the church, was performed, to highlight possible presence and nature of secondary newly-formed phases (e.g., salt efflorescence). Several methodologies were applied to carry out physical-chemical and petrographic analysis: X-Ray fluorescence (XRF) and Inductively Coupled Mass Spectrometry (ICP-MS), X-Ray Diffractometry (XRD) for chemical and mineral composition; Optical and Scanning Electron Microscopy (SEM) for textures, mineral assemblages and microstructures studies; He-picnometry, water-absorption and mechanical

  3. Constraints on inflation revisited. An analysis including the latest local measurement of the Hubble constant

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Rui-Yun [Northeastern University, Department of Physics, College of Sciences, Shenyang (China); Zhang, Xin [Northeastern University, Department of Physics, College of Sciences, Shenyang (China); Peking University, Center for High Energy Physics, Beijing (China)

    2017-12-15

    We revisit the constraints on inflation models by using the current cosmological observations involving the latest local measurement of the Hubble constant (H{sub 0} = 73.00 ± 1.75 km s{sup -1} Mpc{sup -1}). We constrain the primordial power spectra of both scalar and tensor perturbations with the observational data including the Planck 2015 CMB full data, the BICEP2 and Keck Array CMB B-mode data, the BAO data, and the direct measurement of H{sub 0}. In order to relieve the tension between the local determination of the Hubble constant and the other astrophysical observations, we consider the additional parameter N{sub eff} in the cosmological model. We find that, for the ΛCDM+r+N{sub eff} model, the scale invariance is only excluded at the 3.3σ level, and ΔN{sub eff} > 0 is favored at the 1.6σ level. Comparing the obtained 1σ and 2σ contours of (n{sub s},r) with the theoretical predictions of selected inflation models, we find that both the convex and the concave potentials are favored at 2σ level, the natural inflation model is excluded at more than 2σ level, the Starobinsky R{sup 2} inflation model is only favored at around 2σ level, and the spontaneously broken SUSY inflation model is now the most favored model. (orig.)

  4. Hepatotoxicity associated with statin use: analysis of the cases included in the Spanish Hepatotoxicity Registry

    Directory of Open Access Journals (Sweden)

    Emilia V. Perdices

    2014-04-01

    Full Text Available Objectives: The hepatotoxic potential of statins is controversial. The objectives of this study were to describe the relative frequency of hepatotoxicity caused by statins and the phenotypes found in Spain. Patients and methods: The incidence of hepatotoxicity attributed to statins in the Spanish Hepatotoxicity Registry (REH were studied and compared with those attributed to other drugs. Results: Between April 1994 and August 2012, the REH included a total of 858 cases of which 47 (5.5 % were attributed to statins. Of these, 16 were due to atorvastatin (34 %; 13 to simvastatin (27.7 %; 12 to fluvastatin (25.5 %; 4 to lovastatin (8.5 % and 2 to pravastatin (4.3 %. Statins represented approximately half of the cardiovascular group which occupied 3.er place (10 %, after anti-infectious agents (37 % and central nervous system drugs (14 %. The hepatocellular pattern was predominant, especially in the simvastatin group (85%, the cholestatic/mixed pattern was more frequent with fluvastatin (66 % and had a similar distribution to atorvastatin. Patients with statin-induced toxicity were older (62 years versus 53 years, p < 0.001 and more often demonstrated an autoimmune hepatitis phenotype (8.5 % versus 1.4 %, p < 0.003. Conclusions: Statins are not a common cause of hepatotoxicity in Spain. Atorvastatin is the statin involved in the greatest number of incidents. The liver injury pattern varies among the different statins. The hepatitis phenotype with autoimmune features appears to be a characteristic signature of statin-induced hepatotoxicity.

  5. An imprecise Dirichlet model for Bayesian analysis of failure data including right-censored observations

    International Nuclear Information System (INIS)

    Coolen, F.P.A.

    1997-01-01

    This paper is intended to make researchers in reliability theory aware of a recently introduced Bayesian model with imprecise prior distributions for statistical inference on failure data, that can also be considered as a robust Bayesian model. The model consists of a multinomial distribution with Dirichlet priors, making the approach basically nonparametric. New results for the model are presented, related to right-censored observations, where estimation based on this model is closely related to the product-limit estimator, which is an important statistical method to deal with reliability or survival data including right-censored observations. As for the product-limit estimator, the model considered in this paper aims at not using any information other than that provided by observed data, but our model fits into the robust Bayesian context which has the advantage that all inferences can be based on probabilities or expectations, or bounds for probabilities or expectations. The model uses a finite partition of the time-axis, and as such it is also related to life-tables

  6. Modeling and analysis of the affinity filtration process, including broth feeding, washing, and elution steps.

    Science.gov (United States)

    He, L Z; Dong, X Y; Sun, Y

    1998-01-01

    Affinity filtration is a developing protein purification technique that combines the high selectivity of affinity chromatography and the high processing speed of membrane filtration. In this work a lumped kinetic model was developed to describe the whole affinity filtration process, including broth feeding, contaminant washing, and elution steps. Affinity filtration experiments were conducted to evaluate the model using bovine serum albumin as a model protein and a highly substituted Blue Sepharose as an affinity adsorbent. The model with nonadjustable parameters agreed fairly to the experimental results. Thus, the performance of the affinity filtration in processing a crude broth containing contaminant proteins was analyzed by computer simulations using the lumped model. The simulation results show that there is an optimal protein loading for obtaining the maximum recovery yield of the desired protein with a constant purity at each operating condition. The concentration of a crude broth is beneficial in increasing the recovery yield of the desired protein. Using a constant amount of the affinity adsorbent, the recovery yield can be enhanced by decreasing the solution volume in the stirred tank due to the increase of the adsorbent weight fraction. It was found that the lumped kinetic model was simple and useful in analyzing the whole affinity filtration process.

  7. Risk Factor Analysis for AKI Including Laboratory Indicators: a Nationwide Multicenter Study of Hospitalized Patients

    Directory of Open Access Journals (Sweden)

    Sasa Nie

    2017-10-01

    Full Text Available Background/Aims: Risk factor studies for acute kidney injury (AKI in China are lacking, especially those regarding non-traditional risk factors, such as laboratory indicators. Methods: All adult patients admitted to 38 tertiary and 22 secondary hospitals in China in any one month between July and December 2014 were surveyed. AKI patients were screened according to the Kidney Disease: Improving Global Outcomes’ definition of AKI. Logistic regression was used to analyze the risk factors for AKI, and Cox regression was used to analyze the risk of in-hospital mortality for AKI patients; additionally, a propensity score analysis was used to reconfirm the risk factors among laboratory indicators for mortality. Results: The morbidity of AKI was 0.97%. Independent risk factors for AKI were advancing age, male gender, hypertension, and chronic kidney disease. All-cause mortality was 16.5%. The predictors of mortality in AKI patients were advancing age, tumor, higher uric acid level and increases in Acute Physiologic Assessment and Chronic Health Evaluation II and Sequential Organ Failure Assessment scores. The hazard ratio (HR for mortality with uric acid levels > 9.1 mg/dl compared with ≤ 5.2 mg/dl was 1.78 (95% CI: 1.23 to 2.58 for the AKI patients as a group, and was 1.73 (95% CI: 1.24 to 2.42 for a propensity score-matched set. Conclusion: In addition to traditional risk factors, uric acid level is an independent predictor of all-cause mortality after AKI.

  8. BWR transient analysis using neutronic / thermal hydraulic coupled codes including uncertainty quantification

    International Nuclear Information System (INIS)

    Hartmann, C.; Sanchez, V.; Tietsch, W.; Stieglitz, R.

    2012-01-01

    The KIT is involved in the development and qualification of best estimate methodologies for BWR transient analysis in cooperation with industrial partners. The goal is to establish the most advanced thermal hydraulic system codes coupled with 3D reactor dynamic codes to be able to perform a more realistic evaluation of the BWR behavior under accidental conditions. For this purpose a computational chain based on the lattice code (SCALE6/GenPMAXS), the coupled neutronic/thermal hydraulic code (TRACE/PARCS) as well as a Monte Carlo based uncertainty and sensitivity package (SUSA) has been established and applied to different kind of transients of a Boiling Water Reactor (BWR). This paper will describe the multidimensional models of the plant elaborated for TRACE and PARCS to perform the investigations mentioned before. For the uncertainty quantification of the coupled code TRACE/PARCS and specifically to take into account the influence of the kinetics parameters in such studies, the PARCS code has been extended to facilitate the change of model parameters in such a way that the SUSA package can be used in connection with TRACE/PARCS for the U and S studies. This approach will be presented in detail. The results obtained for a rod drop transient with TRACE/PARCS using the SUSA-methodology showed clearly the importance of some kinetic parameters on the transient progression demonstrating that the coupling of a best-estimate coupled codes with uncertainty and sensitivity tools is very promising and of great importance for the safety assessment of nuclear reactors. (authors)

  9. Analysis of initial melanogenesis including tyrosinase transfer and melanosome differentiation through interrupted melanization by glutathione.

    Science.gov (United States)

    Imokawa, G

    1989-07-01

    complete formation of melanosome matrix structure and a lack of inhibition of cellular metabolisms including protein glycosylation.

  10. Characterization of Campylobacter phages including analysis of host range by selected Campylobacter Penner serotypes

    Directory of Open Access Journals (Sweden)

    Brown Stanley

    2007-10-01

    Full Text Available Abstract Background The predominant food borne pathogen in the western world today is Campylobacter. Campylobacter specific bacteriophages (phages have been proposed as an alternative agent for reducing the burden of Campylobacter in broilers. One concern in relation to phage biocontrol is the narrow host range often displayed by phages. To identify the potential of phages as a Campylobacter reducing agent we needed to determine their infectivity on a panel of isolates representing the Campylobacter strains found in broilers as well as humans. Results In this study, Campylobacter phages were isolated from the intestines of broilers and ducks and from abattoir sewage. Twelve phages were investigated to determine their ability to infect the Campylobacter Penner serotypes commonly present in Danish poultry and patients with campylobacteriosis. A total of 89% of the Campylobacter jejuni strains and 14% of the Campylobacter coli strains could be infected by at least one of the bacteriophages. The majority of the phages infected the most common serotypes in Danish broilers (O:1,44; O:2; O:4-complex, but showed limited ability to infect 21 of the less frequent Campylobacter serotypes. Pulse field gel electrophoresis (PFGE and restriction endonuclease analysis (REA were used to characterize the phage genomes. Three categories of bacteriophages were observed. I: a genome size of ~194 kb and refractory to digestion with HhaI; II: a genome size of ~140 kb and digestible by HhaI; and III: a genome size undeterminable in PFGE. The categorization of the phages correlated with the host range patterns displayed by the phages. Six phages were subjected to transmission electron microscopy (TEM. They all belonged to the family of Myoviridae. Conclusion We have characterized and identified the host range of 12 Danish Campylobacter phages. Due to their ability to infect the majority of the common serotypes in Denmark we suggest the phages can become an effective

  11. Characterization of Campylobacter phages including analysis of host range by selected Campylobacter Penner serotypes.

    Science.gov (United States)

    Hansen, Vinni Mona; Rosenquist, Hanne; Baggesen, Dorte Lau; Brown, Stanley; Christensen, Bjarke Bak

    2007-10-18

    The predominant food borne pathogen in the western world today is Campylobacter. Campylobacter specific bacteriophages (phages) have been proposed as an alternative agent for reducing the burden of Campylobacter in broilers. One concern in relation to phage biocontrol is the narrow host range often displayed by phages. To identify the potential of phages as a Campylobacter reducing agent we needed to determine their infectivity on a panel of isolates representing the Campylobacter strains found in broilers as well as humans. In this study, Campylobacter phages were isolated from the intestines of broilers and ducks and from abattoir sewage. Twelve phages were investigated to determine their ability to infect the Campylobacter Penner serotypes commonly present in Danish poultry and patients with campylobacteriosis. A total of 89% of the Campylobacter jejuni strains and 14% of the Campylobacter coli strains could be infected by at least one of the bacteriophages. The majority of the phages infected the most common serotypes in Danish broilers (O:1,44; O:2; O:4-complex), but showed limited ability to infect 21 of the less frequent Campylobacter serotypes. Pulse field gel electrophoresis (PFGE) and restriction endonuclease analysis (REA) were used to characterize the phage genomes. Three categories of bacteriophages were observed. I: a genome size of approximately 194 kb and refractory to digestion with HhaI; II: a genome size of approximately 140 kb and digestible by HhaI; and III: a genome size undeterminable in PFGE. The categorization of the phages correlated with the host range patterns displayed by the phages. Six phages were subjected to transmission electron microscopy (TEM). They all belonged to the family of Myoviridae. We have characterized and identified the host range of 12 Danish Campylobacter phages. Due to their ability to infect the majority of the common serotypes in Denmark we suggest the phages can become an effective agent in the effort to reduce

  12. Petrographic and isotopic evidence for late-stage processes in sulfuric acid caves of the Guadalupe Mountains, New Mexico, USA

    Directory of Open Access Journals (Sweden)

    Palmer Arthur N.

    2012-07-01

    Full Text Available Caves of the Guadalupe Mountains have experienced many modifications since their final phase of sulfuric acid speleogenesis several million years ago. Petrographic and geochemical data reveal details of the change from H2SO4 to CO2-dominated reactions. The H2SO4 dissolution front acquired a coating of replacement gypsum with local pockets of anhydrite and by-products of altered clay, including Fe-Mn oxides. Alteration of bedrock beneath the gypsum produced a white micritized rind with small negative shifts in δ13C and δ18O. Solution basins contain records of the earliest post-speleogenetic processes: corroded bedrock, residual anhydrite, Fe-Mn oxides from fluctuating pH and Eh, mammillary calcite, and dolomitization. Later meteoric water removed or recrystallized much of the gypsum and early micrite, and replaced some gypsum with calcite. Mammillary crusts demonstrate fluctuating groundwater, with calcite layers interrupted by films of Fe-Mn oxides precipitated during periodic inflow of anoxic water. Condensation moisture (from local evaporation absorbs CO2 from cave air, corroding earlier features and lowering their δ13C and δ18O. Drips of condensation water deposit minerals mainly by evaporation, which increases δ18O in the speleothems while δ13C remains nearly constant. By forcing calcite precipitation, evaporation raises the Mg content of remaining water and subsequent precipitates. Dolomite (both primary and replacive is abundant. In areas of low air circulation, water on and within carbonate speleothems equilibrates with cave-air CO2, causing minerals to recrystallize with glassy textures. Fluorite on young evaporative speleothems suggests a recent release of deep-source HF gas and absorption by droplets of condensation water.

  13. Teaching of the Microbiological Analysis of Water Using a Computer Simulation Program That Includes Digitalized Color Images.

    Science.gov (United States)

    Fernandez, A.; And Others

    1992-01-01

    Describes microcomputer-based courseware designed for the simulation of the microbiological analysis of drinking water, including digitalized color images. The use of HyperCard is described and evaluation procedures are explained, including evaluation of the learning and of the class. The evaluation questionnaires are appended. (20 references)…

  14. Petrographic and geochemical investigation of magma chamber processes beneath small Quaternary volcanic centers between Mt. Jefferson and Mt. Hood volcanoes, Cascade Range Volcanic Arc

    Science.gov (United States)

    Cunningham, E.; Cribb, J. W.

    2017-12-01

    The northern Oregon Cascade Range has been dominated by andesite to rhyodacite lavas at both Mt. Jefferson (Conrey, 1991) and at Mt. Hood (Cribb and Barton, 1996) during the Quaternary period. Eruptive sequences at both Mt. Hood and Mt. Jefferson have been attributed to open-system mama mixing (Kent et al., 2010) (Ferrell et al., 2015), and the narrow range of lavas erupted at both centers has been derived from repeated cycles of magma mixing-fractionation (Cribb and Barton, 1996). This research examines major and trace element geochemistry as well as the petrographic characteristics of Clear Lake Butte (CLB), Pinhead Butte (PB), and Olallie Butte (OB), all of which are located between Mt. Hood and Mt. Jefferson, and have ben active in the Quaternary period. The research investigates whether the same type of open-system magma mixing known to have occurred at Mt. Hood and Mt. Jefferson has also occurred at CLB, PB, or OB, or whether those systems were closed to mixing and dominated by fractional crystallization. One of the main goals of this project is to highlight the similarities and differences exhibited by neighboring magmatic systems of similar age, but different scale. Disequilibrium textures observed in thin sections from CLB, OB, and PB suggest open-system magma mixing is likely occurring beneath all three buttes. This petrographic evidence includes plagioclase and pyroxene zoning, embayed margins, sieving, and reaction rims. Major element oxide trends at all three buttes are consistent with fractional crystallization, but show narrow concentrations and non-overlapping compositions between PB, CLB, and OB. All three buttes are characterized by narrow ranges of incompatible and compatible trace element concentrations. CLB, PB, and OB all exhibit LREE enrichment and lack significant HFSE depletions, with PB exhibiting greatest enrichment in REE.

  15. Ca analysis: An Excel based program for the analysis of intracellular calcium transients including multiple, simultaneous regression analysis☆

    Science.gov (United States)

    Greensmith, David J.

    2014-01-01

    Here I present an Excel based program for the analysis of intracellular Ca transients recorded using fluorescent indicators. The program can perform all the necessary steps which convert recorded raw voltage changes into meaningful physiological information. The program performs two fundamental processes. (1) It can prepare the raw signal by several methods. (2) It can then be used to analyze the prepared data to provide information such as absolute intracellular Ca levels. Also, the rates of change of Ca can be measured using multiple, simultaneous regression analysis. I demonstrate that this program performs equally well as commercially available software, but has numerous advantages, namely creating a simplified, self-contained analysis workflow. PMID:24125908

  16. Petrographical, geochemical and petrological study of the xenoliths associating the basalt of (Southwest, Syria)

    International Nuclear Information System (INIS)

    Safarjalani, A.; Nasir, S.

    1998-01-01

    Alkali basalt spread northeast part of Shamah volcanic field (Southwest of Syria) belonging to the Neogene and Quaternary ages, which are coexisted with a great quantity of mafic and ultramafic xenoliths and megacrysts. Field observations and data of geochemical and petrographical studies results, for xenoliths coexisted with alkali basalt speared over the northwest part of the arabian plate (Syria) indicate availability of a proper environment where various kinds of xenoliths of lower crustal and upper mantle were formed, this indicates that these xenoliths have been formed under different thermo barometric conditions. The study of available mineral para genesis and geothermobarometrics on coexisting minerals suggests equilibration conditions, ranging between 6-8 kba for pressure and 850-920 Centigrade for temperature, and that is for xenoliths of gabbroic nature formed in the lower crustal between 20-27 km depth. With regard to the formation conditions of the xenoliths formed in the upper mantle (Pyroxenite and Lherzolite); they rang between 13.5 - 14.5 kba for pressure and 950-1060 Centigrade for temperature. (Author)

  17. Inferences of paleoenvironment from petrographic, chemical and stable-isotope studies of calcretes and fracture calcites

    International Nuclear Information System (INIS)

    Vaniman, D.T.; Whelan, J.F.

    1994-01-01

    Past research has indicated a genetic connection between calcite formed in calcretes at the surface of Yucca Mountain, Nevada, and calcites deposited in underlying fractures of the unsaturated zone. This common genesis suggests that paleoenvironmental information, as well as the timing and pathways of past recharge episodes, might be obtained from studies of the deposits in both the calcretes and the unsaturated fractures. Chemical and isotopic modification of calcite-precipitating fluids appears to begin at the surface, largely under the influence of plant roots and their decay products. Chemical characteristics of the deeper calcites are either initiated or largely defined within the first few meters of fluid migration into the unsaturated tuffs beneath the calcretes. However, petrographic and isotopic data indicate a very unique low-δ 13 C microenvironment that is localized at the upper surfaces of the calcretes. These surfaces form an interface in the soil horizon where infiltration may pond above the underlying carbonate open-quotes plugclose quotes. In order to decipher the chemistry and petrology of past recharge events, it is important to first understand microenvironments such as this that contribute to mineral precipitation/dissolution events in the pedogenic environment

  18. Inferences of paleoenvironment from petrographic, chemical and stable-isotope studies of calcretes and fracture calcites

    International Nuclear Information System (INIS)

    Vaniman, D.T.; Whelan, J.F.

    1994-01-01

    Past research has indicated a genetic connection between calcite formed in calcretes at the surface of Yucca Mountain, Nevada, and calcites deposited in underlying fractures of the unsaturated zone. This common genesis suggests that paleoenvironmental information, as well as the timing and pathways of past recharge episodes, might be obtained from studies of the deposits in both the calcretes and the unsaturated fractures. Chemical and isotopic modification of calcite-precipitating fluids appears to begin at the surface, largely under the influence of plant roots and their decay products. Chemical characteristics of the deeper calcites are either initiated or largely defined within the first few meters of fluid migration into the unsaturated tuffs beneath the calcretes. However, petrographic and isotopic data indicate a very unique low-δ 13 C microenvironment that is localized at the upper surfaces of the calcretes. These surfaces form an interface in the soil horizon where infiltration may pond above the underlying carbonate ''plug.'' In order to decipher the chemistry and petrology of past recharge events, it is important to first understand microenvironments such as this that contribute to mineral precipitation/dissolution events in the pedogenic environment

  19. Inferences of paleoenvironment from petrographic, chemical and stable-isotope studies of calcretes and fracture calcites

    Energy Technology Data Exchange (ETDEWEB)

    Vaniman, D.T. [Los Alamos National Lab., NM (United States); Whelan, J.F. [Geological Survey, Denver, CO (United States)

    1994-03-01

    Past research has indicated a genetic connection between calcite formed in calcretes at the surface of Yucca Mountain, Nevada, and calcites deposited in underlying fractures of the unsaturated zone. This common genesis suggests that paleoenvironmental information, as well as the timing and pathways of past recharge episodes, might be obtained from studies of the deposits in both the calcretes and the unsaturated fractures. Chemical and isotopic modification of calcite-precipitating fluids appears to begin at the surface, largely under the influence of plant roots and their decay products. Chemical characteristics of the deeper calcites are either initiated or largely defined within the first few meters of fluid migration into the unsaturated tuffs beneath the calcretes. However, petrographic and isotopic data indicate a very unique low-{delta}{sup 13}C microenvironment that is localized at the upper surfaces of the calcretes. These surfaces form an interface in the soil horizon where infiltration may pond above the underlying carbonate ``plug.`` In order to decipher the chemistry and petrology of past recharge events, it is important to first understand microenvironments such as this that contribute to mineral precipitation/dissolution events in the pedogenic environment.

  20. Petrographic aspects of the intrusive complex of Arroyo Marincho and granodiorite of Arroyo Grande.Part I

    International Nuclear Information System (INIS)

    Preciozzi, F.

    2011-01-01

    The epimetamorphis of Arroyo Grande formation (lower Precambrian) are integrated by several granitoid bodies. The Marincho complex represented by;a) main unit integrated by hornoblenditic diorite to mozongranite b) an incomformable belt of porfinoblastic honobledite c) one unit characterized by a two mica granite heterogranular to porphiroic.The petrographic diagrams shows evolutive lines, suggestings differentd origins for the main granodiorite, granodiorite the Arroyo Grande, south granite and the hornoblendites.

  1. Palynological, organic-petrographical and organic-geochemical investigations on coals and sediments of the Duckmantian, Ruhr Basin, Germany

    OpenAIRE

    Jasper, Kai

    2010-01-01

    The idea of the present thesis was to combine different established methods in a high-resolution study on a short-timed interval of Duckmantian strata (Pennsylvanian/Upper Carboniferous) of the Ruhr Basin, Western Germany. Organic petrographical, palynological, sedimentological and organic geochemical techniques were used to obtain a huge data set, to support the argumentations and discussions. In doing so, these investigations were focused on two main goals: (a) the maturity and quality of s...

  2. The role of petrographic and radiochemical analyses in risk assessment at Superfund sites contaminated with radioactive materials

    International Nuclear Information System (INIS)

    Neiheisel, James; Mauro, John J.

    1992-01-01

    For the past four years, the EPA Office of Radiation Programs has been evaluating the use of Volume Reduction/Chemical Extraction (VORCE) technologies as a means of remediating sites containing large volumes of soil contaminated with relatively low levels of enhanced sources of naturally occurring radionuclides, primarily radium and thorium. In the process of evaluating these technologies, data have been gathered on the chemical and physical characteristics of the radioactive contaminants (Le., radiochemical data) and the mineral composition of the soil matrix (i.e., petrographic data) at a number of Superfund sites. The radiochemical and petrographic data are used as a first step in determining the feasibility and potential cost-effectiveness of VORCE technologies as an alternative to soil excavation (2). Questions have recently been raised regarding whether the site-specific radiochemical and petrographic data may also have use in the performance of Baseline Risk Assessments at these sites. In order to address these questions, petrographic and radiological analyses have been performed on soil samples obtained from a radium contaminated site in Montclair, New Jersey. While radon is the primary risk at this site by approximately three orders of magnitude, this investigation has focus on radium in the soil. The results of the analyses reveal that Ra-226 contamination is associated predominantly with the silt/clay size fraction of the soil and in a highly insoluble form. These findings indicate that standard default assumptions regarding soil to air suspension factors and inhalation dose conversion factors may not be appropriate for this site. Work is continuing on determining the potential significance of these findings and extending these studies to other Superfund sites. (author)

  3. Microstructure of selected metamorphic rock types - application of petrographic image analysis

    Czech Academy of Sciences Publication Activity Database

    Šachlová, Š.; Schenk, Vladimír; Schenková, Zdeňka

    2010-01-01

    Roč. 7, č. 4 (2010), s. 431-443 ISSN 1214-9705 R&D Projects: GA MŠk(CZ) LC506 Institutional research plan: CEZ:AV0Z30460519 Keywords : metamorphic rock * texture * structure Subject RIV: DB - Geology ; Mineralogy Impact factor: 0.452, year: 2010 www.irsm.cas.cz/abstracts/AGG/04_10/4_Sachlova.pdf

  4. 41 CFR 102-80.105 - What information must be included in an equivalent level of safety analysis?

    Science.gov (United States)

    2010-07-01

    ... engineer. The analysis should include a narrative discussion of the features of the building structure... and location of fuel items, space layout, building construction, openings and ventilation, suppression capability, detection time, occupant notification, occupant reaction time, occupant mobility, and means of...

  5. Petrographic and geochemical study on cave pearls from Kanaan Cave (Lebanon

    Directory of Open Access Journals (Sweden)

    Nader Fadi H.

    2007-01-01

    Full Text Available The Kanaan cave is situated at the coastal zone, north of Beirut City (capital of Lebanon. The cave is located within the upper part of the Jurassic Kesrouane Formation (Liassic to Oxfordian which consists mainly of micritic limestone. Twenty seven cave pearls were subjected to petrographic (conventional and scanning electron microscopy and geochemical analyses (major/trace elements and stable isotopes. The cave pearls were found in an agitated splash-pool with low mud content. They are believed to have formed through chemical precipitation of calcite in water over-saturated with calcium. The nucleus and micritic laminae show δ18OV-PDB values of about -5.0‰ and δ13C V-PDB values of -11.8‰, while the surrounding calcite spar laminae resulted in δ18OV-PDB ranging between -5.3 and -5.2‰, and δ13C V-PDB between -12.3 and -12.1‰. A genesis/diagenesis model for these speleothems is proposed involving recrystallization which has selectively affected the inner layers of the cave pearls. This is chiefly invoked by sparry calcite crystals ‘invading’ the inner micrite cortical laminae and the nuclei (cross-cutting the pre-existing mud-envelopes, and the slight depletion in δ18O values from inner to outer cortical layers. The calculated δ18OV-SMOW of the water (-4.2‰ matches with data on meteoric water signature for the central eastern Mediterranean region.

  6. Types and Mechanisms of Alterations on the Mesozoic Ophiolites (Lake Van Region-Turkey): Petrographical and Geochemical Approach

    Science.gov (United States)

    Yazıcı, Ömer; Üner, Tijen; Mutlu, Sacit; Depçi, Tolga

    2017-04-01

    Mesozoic ophiolites are widely located in the eastern part of Lake Van Basin. The ophiolitic rocks deformed during the rifting and/or closure period of the Neo-Tethyan Ocean are observed as tectonic slices in the region. These ophiolites are represented by volcano-sedimentary units, isolated dikes, and mafic-ultramafic rocks. The formation, emplacement and post-emplacement processes of these ophiolitic rocks can be understood owing to alterations as rodingitization, serpentinization, and listwaenitization. Three stages of sequent mineralization are detected in the ophiolitic rocks. First stage is pyrometasomatization, represented by metamorphic minerals (garnet, chlorite etc.), observed in intruded dikes. Second stage is hydrothermal alteration of mafic-ultramafic rocks namely serpentinization. Listwaenite alteration is the last stage of mineralization. According to petrographical investigations, garnet+chlorite+diopsite minerals are detected in rodengites. The conversion of the plagioclase minerals to the calcsilicatic minerals in rodengites suggests that these rocks are metasomatic rocks produced by Ca-rich fluids derived from serpentinization of the ultramafic rocks. The serpentine minerals (chrysotile-lizardite) can be distinguished from each other by their morphology as being platy or fibrous. Listwaenite alteration is followed by the formation of carbonate, silica, oxides and hydroxides. Chemical analysis of these rocks show that the listwaenites have an enrichment in Ni and Co contents while the rodingites have low SiO2 and high CaO and MgO values (SiO2 28,50 - 36,67%, CaO 11,99 - 20,88%, and MgO 7,99 - 17,73%). Alteration types observed on the ophiolitic rocks demonstrate that these rocks are metamorphised by low pressure and low to middle temperature conditions (greenshist facies). Serpentinization is pointing out an alteration which occurred during the emplacement of the ophiolites or the latter period. This study has been supported by Project number 2013

  7. Recent Progress on Labfit: a Multispectrum Analysis Program for Fitting Lineshapes Including the Htp Model and Temperature Dependence

    Science.gov (United States)

    Cich, Matthew J.; Guillaume, Alexandre; Drouin, Brian; Benner, D. Chris

    2017-06-01

    Multispectrum analysis can be a challenge for a variety of reasons. It can be computationally intensive to fit a proper line shape model especially for high resolution experimental data. Band-wide analyses including many transitions along with interactions, across many pressures and temperatures are essential to accurately model, for example, atmospherically relevant systems. Labfit is a fast multispectrum analysis program originally developed by D. Chris Benner with a text-based interface. More recently at JPL a graphical user interface was developed with the goal of increasing the ease of use but also the number of potential users. The HTP lineshape model has been added to Labfit keeping it up-to-date with community standards. Recent analyses using labfit will be shown to demonstrate its ability to competently handle large experimental datasets, including high order lineshape effects, that are otherwise unmanageable.

  8. Nontargeted nuclear magnetic resonance (NMR) analysis to detect hazardous substances including methanol in unrecorded alcohol from Novosibirsk, Russia

    OpenAIRE

    Hausler, Thomas; Okaru,  Alex O.; Neufeld, Maria; Rehm, Jürgen; Kuballa, Thomas; Luy, Burkhard; Lachenmeier, Dirk W.

    2016-01-01

    Nuclear magnetic resonance (NMR) spectroscopy was applied to the analysis of alcoholic products in the context of health and safety control. A total of 86 samples of unrecorded alcohol were collected in Novosibirsk and nearby cities in Russia. Sampling was based on interviews with alcohol dependent patients, and unrecorded alcohol thus defined included illegally or informally produced alcoholic products (e.g., counterfeit or home-made alcoholic beverages) or surrogate alcohol in the form of c...

  9. Detection of Organic Constituents Including Chloromethylpropene in the Analyses of the ROCKNEST Drift by Sample Analysis at Mars (SAM)

    Science.gov (United States)

    Eigenbrode, J. L.; Glavin, D.; Coll, P.; Summons, R. E.; Mahaffy, P.; Archer, D.; Brunner, A.; Conrad, P.; Freissinet, C.; Martin, M.; hide

    2013-01-01

    key challenge in assessing the habitability of martian environments is the detection of organic matter - a requirement of all life as we know it. The Curiosity rover, which landed on August 6, 2012 in Gale Crater of Mars, includes the Sample Analysis at Mars (SAM) instrument suite capable of in situ analysis of gaseous organic components thermally evolved from sediment samples collected, sieved, and delivered by the MSL rover. On Sol 94, SAM received its first solid sample: scooped sediment from Rocknest that was sieved to analysis was performed. This blank served 1) to clean the analytical instrument of SAMinternal materials that accumulated in the gas processing system since integration into the rover, and 2) to characterize the background signatures of SAM. Both the blank and the Rocknest samples showed the presence of hydrocarbon components.

  10. Physical urticaria: Review on classification, triggers and management with special focus on prevalence including a meta-analysis.

    Science.gov (United States)

    Trevisonno, Jordan; Balram, Bhairavi; Netchiporouk, Elena; Ben-Shoshan, Moshe

    2015-08-01

    Physical urticaria (PU) is a subset of chronic urticaria (CU) induced by physical stimuli. To date, there is no consensus in the literature on the prevalence of PU among patients with CU. Our objective was to review the clinical presentation, diagnosis and management of PU and to estimate the prevalence of PU in CU patients. We performed a narrative review of PU and conducted a systemic review and meta-analysis to determine the pooled estimates of the prevalence of PU among patients with CU in the literature up to September 2014. We searched four databases (PubMed, Ovid MEDLINE and Web of Science) of published work for which full text was available in English or French. Studies were eligible if they measured the prevalence of PU in adults or children with CU worldwide and ineligible if CU cases were not differentiated from total urticaria cases. Meta-analysis was conducted using Stata, version 12.0 (StataCorp, College Station, TX). In addition, the quality and validity of the articles included in the meta-analysis was assessed. Ten studies were included in our meta-analysis. Sample sizes ranged from 202 to 4157 patients. The pooled prevalence estimate of PU including and excluding cholinergic forms among all cases of CU were 13.1% (95% CI: 12.5, 13.6) and 14.9% (95% CI: 14.3, 15.7), respectively. Our results must be viewed with circumspection because of the small number of eligible articles and heterogeneity among studies. Even so, the results suggest that PU is an important subset of CU and that physicians should be aware of this important condition in order to manage patients appropriately.

  11. Petrographic, mineralogical and geochemical characterization of the Serrinha coal waste pile (Douro Coalfield, Portugal) and the potential environmental impacts on soil, sediments and surface waters

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, J. [Centro de Geologia, Faculdade de Ciencias, Universidade do Porto, Rua do Campo Alegre, 687, 4169-007 Porto (Portugal); Ferreira da Silva, E. [GeoBioTec, Geobiosciences, Geotechnologies and Geoengineering Research Center, Universidade de Aveiro, Campus de Santiago, 3810-193 Aveiro (Portugal); Li, Z.; Ward, C. [School of Biological, Earth and Environmental Sciences, University of New South Wales. Sydney, NSW 2052 (Australia); Flores, D. [Departamento de Geociencias, Ambiente e Ordenamento do Territorio, Faculdade de Ciencias, Universidade do Porto, Rua do Campo Alegre, 687, 4169-007 Porto (Portugal)

    2010-09-01

    Serrinha is the largest coal waste pile resulting from mining activities in the Douro Coalfield, Portugal. The exploitation of anthracite in tens of small mines caused some environmental impacts, as is the case of the coal waste piles that exist in old mines and adjacent areas. The Serrinha waste pile is essentially made up of 2 million tonnes of shales and carbonaceous shales, deposited in a topographical depression over about 30 years. Despite the environmental restoration accomplished in the Serrinha waste pile, some environmental problems seem to persist. In this study a petrographic, mineralogical and geochemical characterization was done in order to recognize and understand these problems. The materials studied were coal waste, sediments and waters from the drainage system and decanting basins, soils from the surrounding areas, leachates from waste material and neoformed minerals formed at the bottom of the waste pile. The main lithologies (carbonaceous shale and lithic arenite) and coal from the Douro Coalfield were also analyzed. Petrographic analysis shows some evidence of weathering (on organic and inorganic matter) related to the time of exposure to the weathering agents and the easy access of air within the waste pile (due to both the poor compaction and the heterogeneity of the material). Mineralogically, the composition of coal waste material has contributions from both the coal and the associated lithologies. R-type cluster analysis of the waste pile material allows two distinct clusters to be identified. In the first cluster a sulfide fraction is represented by the association of As, Cd, Cu, Pb, Ni and Zn, while Fe clustered with Al, Co, and Ti indicates that some of the Fe and the other elements are likely associated with silicate minerals such as clays. The second cluster, represented by Cr, V, Zr, Rb, REE, Mn, Li and Ba, probably represent a silicate fraction, perhaps detrital accessory minerals. The waste pile material, leachates, soils

  12. Magma Mixing at Pulang Porphyry Copper Deposit, NW China: Petrographic, Geochemical and Geochronological evidence

    Science.gov (United States)

    Cao, D.; Wang, A.

    2009-12-01

    Pulang porphyry copper deposit, located in Zhongdian arc, NW China, was formed by the subduction process of eastern Paleo-Tethys Oceanic crust. Plenty of mafic microgranular enclaves (MME) were found in the granodiorite porphyries, which intruded in quartz monzonite porphyries, the wall rocks of copper orebodies. The enclaves are diorite in composition, and represent blobs of mafic magma injected into a felsic host magma. The MME have a mineral assemblage (plagioclase + amphibole + biotite ± quartz ± K-feldspar) almost identical to that of host granodiorite porphyries, but with different mineral proportions. The MME are strip-shaped with grouped and directional alignment, and some of them contact gradually with the host rocks. The characteristic petrographic features of the MME are the presence of mingling and quench textures, such as acicular apatites, quartz ocelli rimmed by mafic minerals, and K-feldspar poikilitically enclosing mafic minerals, etc. These evidences show magma mingling or mixing. For the MME and host rocks, main oxides or elements with SiO2, or Al2O3/MgO with SiO2/MgO display significant linear correlations. Characteristics of spidergrams and REE patterns of MME and host rocks are similar, the MME present negative Eu and Sr anomalies, and the host rocks show weak Eu and obvious Sr positive anomalies. According to these, we can conclude that elements transferred between the MME and host rocks, which indicates the existence of magma mixing. The SHRIMP U-Pb concordia ages of the MME, granodiorite porphyries and quartz monzonite porphyries are 213±1Ma, 211±1Ma and 213.1±1.7Ma respectively. Molybdenite Re-Os isochron age is 213±3.8Ma. All these ages indicated the events of magma mixing and copper mineralization were at the same period. Phenomena of magma mixing have been found at many large-scale porphyry copper deposits around the world. Pulang porphyry copper deposit will be a new object to study the role of mafic magmas in the generation of

  13. Stratigraphy, structure, and some petrographic features of Tertiary volcanic rocks in the USW G-2 drill hole, Yucca Mountain, Nye County, Nevada

    Science.gov (United States)

    Maldonado, Florian; Koether, S.L.

    1983-01-01

    A continuously cored drill hole designated as USW G-2, located at Yucca Mountain in southwestern Nevada, penetrated 1830.6 m of Tertiary volcanic strata composed of abundant silicic ash-flow tuffs, minor lava and flow breccias, and subordinate volcaniclastic rocks. The volcanic strata penetrated are comprised of the following in descending order: Paintbrush Tuff (Tiva Canyon Member, Yucca Mountain Member, bedded tuff, Pah Canyon Member, and Topopah Spring Member), tuffaceous beds of Calico Hills, Crater Flat Tuff (Prow Pass Member, Bullfrog Member, and Tram unit), lava and flow breccia (rhyodacitic), tuff of Lithic Ridge, bedded and ash-flow tuff, lava and flow breccia (rhyolitic, quartz latitic, and dacitic), bedded tuff, conglomerate and ash-flow tuff, and older tuffs of USW G-2. Comparison of unit thicknesses at USW G-2 to unit thicknesses at previously drilled holes at Yucca Mountain indicate the following: (1) thickening of the Paintbrush Tuff members and tuffaceous beds of Calico Hills toward the northern part of Yucca Mountain; (2) thickening of the Prow Pass Member but thinning of the Bullfrog Member and Tram unit; (3) thinning of the tuff of Lithic Ridge; (4) presence of approximately 280 m of lava and flow breccia not previously penetrated by any drill hole; and (5) presence of an ash-flow tuff unit at the bottom of the drill hole not previously intersected, apparently the oldest unit penetrated at Yucca Mountain to date. Petrographic features of some of the units include: (1) decrease in quartz and K-feldspar and increases in biotite and plagioclase with depth in the tuffaceous beds of Calico Hills; (2) an increase in quartz phenocrysts from the top to the bottom members of the Crater Flat Tuff; (3) a low quartz content in the tuff of Lithic Ridge, suggesting tapping of the magma chamber at quartz-poor levels; (4) a change in zeolitic alteration from heulandite to clinoptilolite to mordenite with increasing depth; (5) lavas characterized by a rhyolitic

  14. A meta-analysis including dose-response relationship between night shift work and the risk of colorectal cancer.

    Science.gov (United States)

    Wang, Xiao; Ji, Alin; Zhu, Yi; Liang, Zhen; Wu, Jian; Li, Shiqi; Meng, Shuai; Zheng, Xiangyi; Xie, Liping

    2015-09-22

    A meta-analysis was conducted to quantitatively evaluate the correlation between night shift work and the risk of colorectal cancer. We searched for publications up to March 2015 using PubMed, Web of Science, Cochrane Library, EMBASE and the Chinese National Knowledge Infrastructure databases, and the references of the retrieved articles and relevant reviews were also checked. OR and 95% CI were used to assess the degree of the correlation between night shift work and risk of colorectal cancer via fixed- or random-effect models. A dose-response meta-analysis was performed as well. The pooled OR estimates of the included studies illustrated that night shift work was correlated with an increased risk of colorectal cancer (OR = 1.318, 95% CI 1.121-1.551). No evidence of publication bias was detected. In the dose-response analysis, the rate of colorectal cancer increased by 11% for every 5 years increased in night shift work (OR = 1.11, 95% CI 1.03-1.20). In conclusion, this meta-analysis indicated that night shift work was associated with an increased risk of colorectal cancer. Further researches should be conducted to confirm our findings and clarify the potential biological mechanisms.

  15. Integrated petrographic and geochemical study of coal and gas shales from the Sabinas and Chihuahua basins, North of Mexico: estimation of methane gas resources

    International Nuclear Information System (INIS)

    De La O Burrola, Francisco

    2013-01-01

    This comprehensive characterization study was performed using organic petrology and geochemistry conducted in the Sabinas basin and Chihuahua in northern Mexico. This information allowed a numerical modeling of gas formation, considering the thermal subsidence of coal and carbonaceous shales. The objectives of this thesis are: - Establish a characterization methodology for the studied rocks - Estimate potential gas generator and its regional distribution - Estimate the methane gas resources For the development of this project, we conducted an intensive campaign representative sampling of coal, carbonaceous shales and coal gas 'in situ'. For the Sabinas basin were studied 97 samples and 114 samples in the basin of Chihuahua. The analyses carried out that were used on the samples analyzed allowed to characterize the kerogen and gas. The methodology used to cross petrographic and geochemical information to analyze the petroleum system by numerical modeling. Analyses were: Petrographic, reflectance %Ro, elemental analysis and immediate, Rock Eval6 R (Bulk rock), isotopic analysis, δ 13 C, δD, (coal gas), scanning electron microscopy, image analysis and analysis of macerals fluid inclusions. The analyzes that were used on the samples allowed to characterize the sample, the kerogen and gas. The methodology used to cross petrographic and geochemical information for analyze the oil system by numerical modeling. Analyses were: Petrographic, reflectance %Ro, elemental analysis and immediate, Rock Eval6 R (Bulk rock), isotopic analysis, δ 13 C, δD, (coal gas), scanning electron microscopy, image analysis and analysis of macerals fluid inclusions A computer program was constructed to cross the information with the analysis of samples of artificial maturation experiments in the laboratory. This approach allowed estimation of methane gas resources generated by coal and carbonaceous shales. The main results obtained for Sabinas Basin were: - The kerogen of the

  16. Evolutionary diversity of bile salts in reptiles and mammals, including analysis of ancient human and extinct giant ground sloth coprolites

    Directory of Open Access Journals (Sweden)

    Hofmann Alan F

    2010-05-01

    Full Text Available Abstract Background Bile salts are the major end-metabolites of cholesterol and are also important in lipid and protein digestion and in influencing the intestinal microflora. We greatly extend prior surveys of bile salt diversity in both reptiles and mammals, including analysis of 8,000 year old human coprolites and coprolites from the extinct Shasta ground sloth (Nothrotherium shastense. Results While there is significant variation of bile salts across species, bile salt profiles are generally stable within families and often within orders of reptiles and mammals, and do not directly correlate with differences in diet. The variation of bile salts generally accords with current molecular phylogenies of reptiles and mammals, including more recent groupings of squamate reptiles. For mammals, the most unusual finding was that the Paenungulates (elephants, manatees, and the rock hyrax have a very different bile salt profile from the Rufous sengi and South American aardvark, two other mammals classified with Paenungulates in the cohort Afrotheria in molecular phylogenies. Analyses of the approximately 8,000 year old human coprolites yielded a bile salt profile very similar to that found in modern human feces. Analysis of the Shasta ground sloth coprolites (approximately 12,000 years old showed the predominant presence of glycine-conjugated bile acids, similar to analyses of bile and feces of living sloths, in addition to a complex mixture of plant sterols and stanols expected from an herbivorous diet. Conclusions The bile salt synthetic pathway has become longer and more complex throughout vertebrate evolution, with some bile salt modifications only found within single groups such as marsupials. Analysis of the evolution of bile salt structures in different species provides a potentially rich model system for the evolution of a complex biochemical pathway in vertebrates. Our results also demonstrate the stability of bile salts in coprolites

  17. Evolutionary diversity of bile salts in reptiles and mammals, including analysis of ancient human and extinct giant ground sloth coprolites

    Science.gov (United States)

    2010-01-01

    Background Bile salts are the major end-metabolites of cholesterol and are also important in lipid and protein digestion and in influencing the intestinal microflora. We greatly extend prior surveys of bile salt diversity in both reptiles and mammals, including analysis of 8,000 year old human coprolites and coprolites from the extinct Shasta ground sloth (Nothrotherium shastense). Results While there is significant variation of bile salts across species, bile salt profiles are generally stable within families and often within orders of reptiles and mammals, and do not directly correlate with differences in diet. The variation of bile salts generally accords with current molecular phylogenies of reptiles and mammals, including more recent groupings of squamate reptiles. For mammals, the most unusual finding was that the Paenungulates (elephants, manatees, and the rock hyrax) have a very different bile salt profile from the Rufous sengi and South American aardvark, two other mammals classified with Paenungulates in the cohort Afrotheria in molecular phylogenies. Analyses of the approximately 8,000 year old human coprolites yielded a bile salt profile very similar to that found in modern human feces. Analysis of the Shasta ground sloth coprolites (approximately 12,000 years old) showed the predominant presence of glycine-conjugated bile acids, similar to analyses of bile and feces of living sloths, in addition to a complex mixture of plant sterols and stanols expected from an herbivorous diet. Conclusions The bile salt synthetic pathway has become longer and more complex throughout vertebrate evolution, with some bile salt modifications only found within single groups such as marsupials. Analysis of the evolution of bile salt structures in different species provides a potentially rich model system for the evolution of a complex biochemical pathway in vertebrates. Our results also demonstrate the stability of bile salts in coprolites preserved in arid climates

  18. Petrographic variation of the Topopah Spring tuff matrix within and between cored drill holes, Yucca Mountain, Nevada

    International Nuclear Information System (INIS)

    Byers, F.M. Jr.; Moore, L.M.

    1987-02-01

    Our study extends the petrographic zonation of the devitrified rhyolitic tuff matrix of the Topopah Spring Member of the Paintbrush Tuff observed in USW G-4 to four other cored holes in the Yucca Mountain area of the Nevada Test Site: UE-25a No. 1, USW G-1, USW G-2, and USW GU-3. The four petrographic zones occur above the basal vitrophyre and in ascending order are the lower nonlithophysal (ln); the lower lithophysal (ll); the middle nonlithophysal (mn); and the upper lithophysal (ul). Drill hole USW G-2, about two miles north of the Yucca Mountain Exploratory Block, differs significantly from the other four cored holes within or near the block; it has essentially one thick microlitic zone, largely lithophysal, above the vitrophyre. Textural attributes (from coarsest to finest) are phenocrysts, lithics, granophyre, amygdules, spherulites, and cryptocrystalline groundmass. Among individual phenocrysts, only quartz shows significant decrease upward. The four petrographic zones agree fairly well with those defined by contacts placed by USGS geologists and, with minor reservations, can be correlated between the four cored holes in the vicinity of the exploration block. The ln zone is characterized by dense welding, upwardly decreasing cryptocrystallinity, common lithics, and quartz phenocrysts. The ll zone is largely spherulitic with 1 to 13% granophyre generally increasing upward and shard texture becoming less distinct upward. The mn zone is similar to the ln zone except for the moderate welding and fewer quartz and lithic fragments present in the mn zone. The ul and ll zones are similar in microscopic texture, but the ul has more amygdules with tridymite rather than cristobalite and can generally be recognized by its ''Swiss cheese'' appearance in core or hand specimens. A series of discriminatory statistical analyses were made with the thin section modal data to test variation in textural type and quartz phenocrysts

  19. Training and knowledge development for use of software for safety analysis including ANSYS. Simulation of thermal-hydraulic benchmarks

    International Nuclear Information System (INIS)

    2016-01-01

    Comparison of both axial mean and rms velocities of the current analysis with the benchmark submissions and experimental results were consistent, showing that the LES transient model of ANSYS CFX is applicable to the problem of T-junction mixing and to predict the location of thermal fatigue from temperature differences. Study of ICEM CFD (Computational Fluid Dynamics) should be able to provide more tools for a finer hexahedral mesh of the T-junction leading to better results. A video of the flow in time obtained from CFD Post is included with this report to help with visualizing the results of the temperature variation along the pipe

  20. Methylenetetrahydrofolate Reductase Polymorphisms and Risk of Acute Lymphoblastic Leukemia-Evidence from an updated meta-analysis including 35 studies

    Directory of Open Access Journals (Sweden)

    Wang Haigang

    2012-09-01

    Full Text Available Abstract Background 5,10-methylenetetrahydrofolate reductase (MTHFR variants, C677T and A1298C, have been reported to be associated with decreased risk of acute lymphoblastic leukemia (ALL. However, results derived from individually underpowered studies are conflicting. We carried out an updated meta-analysis on the association between MTHFR polymorphisms and ALL risk. Methods Relevant publications were searched through PUBMED and EMBASE databases. The associations between MTHFR C677T and A1298C polymorphisms and the risk of ALL were evaluated by odds ratios (ORs. The heterogeneity and publication bias were estimated. Meta-regression analysis was performed to evaluate the potential sources of heterogeneity. Results C677T polymorphism was associated with a reduced risk of ALL (allele contrast: ORRE = 0.91, 95% CI: 0.83-0.99. Subgroup analysis showed MTHFR C677T variant was associated with decreased susceptibility to ALL in children and Caucasians. Meta-regression showed the logOR for the association between T allele and ALL increased as sex ratio (M/F in the case group increased (P = 0.01. Regarding A1298C polymorphism, no significant association was observed (allele contrast: ORRE = 1.01, 95% CI: 0.91-1.11. There was no publication bias for C677T or A1298C polymorphism. Conclusions The present meta-analysis suggests that the C677T polymorphism, not A1298C, in MTHFR gene is associated with a decreased risk of ALL, particularly among children and Caucasians subjects. Our findings suggest that the influence of the C677T polymorphism on ALL susceptibility is modified by sex ratio in cases (M/F. Since folate intake may be a possible confounding factor, including this factor in future prospective studies is warranted. Further meta-analysis studies should be at least stratified for folate levels and gender to give more powerful and informative results.

  1. Methylenetetrahydrofolate Reductase Polymorphisms and Risk of Acute Lymphoblastic Leukemia-Evidence from an updated meta-analysis including 35 studies

    Science.gov (United States)

    2012-01-01

    Background 5,10-methylenetetrahydrofolate reductase (MTHFR) variants, C677T and A1298C, have been reported to be associated with decreased risk of acute lymphoblastic leukemia (ALL). However, results derived from individually underpowered studies are conflicting. We carried out an updated meta-analysis on the association between MTHFR polymorphisms and ALL risk. Methods Relevant publications were searched through PUBMED and EMBASE databases. The associations between MTHFR C677T and A1298C polymorphisms and the risk of ALL were evaluated by odds ratios (ORs). The heterogeneity and publication bias were estimated. Meta-regression analysis was performed to evaluate the potential sources of heterogeneity. Results C677T polymorphism was associated with a reduced risk of ALL (allele contrast: ORRE = 0.91, 95% CI: 0.83-0.99). Subgroup analysis showed MTHFR C677T variant was associated with decreased susceptibility to ALL in children and Caucasians. Meta-regression showed the logOR for the association between T allele and ALL increased as sex ratio (M/F) in the case group increased (P = 0.01). Regarding A1298C polymorphism, no significant association was observed (allele contrast: ORRE = 1.01, 95% CI: 0.91-1.11). There was no publication bias for C677T or A1298C polymorphism. Conclusions The present meta-analysis suggests that the C677T polymorphism, not A1298C, in MTHFR gene is associated with a decreased risk of ALL, particularly among children and Caucasians subjects. Our findings suggest that the influence of the C677T polymorphism on ALL susceptibility is modified by sex ratio in cases (M/F). Since folate intake may be a possible confounding factor, including this factor in future prospective studies is warranted. Further meta-analysis studies should be at least stratified for folate levels and gender to give more powerful and informative results. PMID:22943282

  2. Study on formation process of layered MMEs based on field observation and petrographic characteristics: A case study from Taejongdae, Busan Korea.

    Science.gov (United States)

    Adam, M. S. A.; Kim, Y. S.; Kim, T.

    2016-12-01

    Mafic Magmatic Enclaves (MME) are a common feature in granitic rocks. However, the Multi-layered MME developed in the outcrop of Cretaceous granite in Taejongdae National Geopark, Busan is a unique phenomenon providing useful information on the formation of MMEs. Multi-layered MME is defined here as MME composed of several contrasting rock shells. Characteristics and origin of MMEs have been studied by several ways; descriptively, geochemically and isotopically due to their importance in the evolution of igneous rocks. This study focuses on the understanding of the formation mechanism of the multi-layers and their rock type diversity. To achieve these goals, field observation between the MMEs and the host granite, petrographic studies and XRF analysis have been carried out. The results show that the MMEs have different shapes and sizes, ranging from elliptical to angular, and from a few centimeters to a meter, respectively. Based on the lithology and the number of layers, the studied MMEs are subdivided into three types as followed; a) single layer type, b) double layer type, and c) triple layer type. The single and double layer types have relatively angular shapes, and their contacts with the host granite are commonly sharp. Layer-forming rocks are variable from mafic porphyritic, mafic fine- to medium- and felsic coarse-grained. The triple layer type has a circular to elliptical shape, while its contact with the host granite is gradual indicating diffusion. It also shows gradual compositional change from mafic to felsic. It is interesting that some of the triple MMEs are injected by granitic materials through cracks. That may indicate brittle deformation during cooling process. The two internal layers of the triple layer MMEs have almost the same mineral composition with different textures indicating the result of cooling process. However, the outer dioritic layer shows mixing composition of mafic and felsic magma, and thus it may indicate that it was generated

  3. [Materiality Analysis of Health Plans Based on Stakeholder Engagement and the Issues Included at ISO 26000:2010].

    Science.gov (United States)

    Moyano Santiago, Miguel Angel; Rivera Lirio, Juana María

    2017-01-18

    Health plans of the Spanish autonomous communities can incorporate sustainable development criteria in its development. There have been no analysis or proposals about development and indicators. The goal is to add a contribution to help build better health plans aimed at sustainable development and help to manage economic, social and environmental impacts of health systems criteria. We used a variation of the RAND/UCLA or modified Delphi technique method. The process consisted of a bibliographical and context matters and issues related to health and social responsibility analysis based on ISO 26000: 2010. A survey by deliberately to a selection of 70 expert members of the identified stakeholders was carried out and a discussion group was held to determine the consensus on the issues addressed in the survey sample. The research was conducted in 2015. From the literature review 33 health issues included in ISO 26000:2010 were obtained. 7 survey proved relevant high consensus, 8 relevance and average consensus and 18 with less relevance and high level of dissent. The expert group excluded 4 of the 18 subjects with less consensus. 29 issues included 33 at work, divided into 7 subjects contained in the guide ISO 26000 of social responsibility, were relevant stakeholders regarding possible inclusion in health plans. Considering the direct relationship published by ISO (International Organization for Standardization) among the issues ISO 26000 and the economic, social and environmental indicators in GRI (Global Reporting Initiative) in its G4 version, a panel with monitoring indicators related to relevant issues were elaborated.

  4. Validity of segmental bioelectrical impedance analysis for estimating fat-free mass in children including overweight individuals.

    Science.gov (United States)

    Ohta, Megumi; Midorikawa, Taishi; Hikihara, Yuki; Masuo, Yoshihisa; Sakamoto, Shizuo; Torii, Suguru; Kawakami, Yasuo; Fukunaga, Tetsuo; Kanehisa, Hiroaki

    2017-02-01

    This study examined the validity of segmental bioelectrical impedance (BI) analysis for predicting the fat-free masses (FFMs) of whole-body and body segments in children including overweight individuals. The FFM and impedance (Z) values of arms, trunk, legs, and whole body were determined using a dual-energy X-ray absorptiometry and segmental BI analyses, respectively, in 149 boys and girls aged 6 to 12 years, who were divided into model-development (n = 74), cross-validation (n = 35), and overweight (n = 40) groups. Simple regression analysis was applied to (length) 2 /Z (BI index) for each of the whole-body and 3 segments to develop the prediction equations of the measured FFM of the related body part. In the model-development group, the BI index of each of the 3 segments and whole body was significantly correlated to the measured FFM (R 2 = 0.867-0.932, standard error of estimation = 0.18-1.44 kg (5.9%-8.7%)). There was no significant difference between the measured and predicted FFM values without systematic error. The application of each equation derived in the model-development group to the cross-validation and overweight groups did not produce significant differences between the measured and predicted FFM values and systematic errors, with an exception that the arm FFM in the overweight group was overestimated. Segmental bioelectrical impedance analysis is useful for predicting the FFM of each of whole-body and body segments in children including overweight individuals, although the application for estimating arm FFM in overweight individuals requires a certain modification.

  5. Study of the interrelationships among chemical and petrographic variables of United States coals

    Energy Technology Data Exchange (ETDEWEB)

    Waddell, C.; Davis, A.; Spackman, W.; Griffiths, J. C.

    1978-03-01

    Multivariate statistical techniques are used in a study of the interrelationships among various coal properties. The properties chosen for study are the components of the ultimate analysis (carbon, hydrogen, organic sulfur, nitrogen and oxygen); moisture; volatile matter; calorific value; maximum reflectance of the vitrinite-group macerals; and the relative proportions of the vitrinite-, liptinite-, and inertinite-group macerals. The coals included in the study are from four coal provinces (Eastern, Interior, Rocky Mountain, and Northern Great Plains) and range in rank from lignite to anthracite. A coal's characteristics, properties, and utilization behavior are determined by the maceral and mineral materials composing the coal. The level of coalification achieved by the maceral materials is of critical importance in fixing the properties. A factor analysis performed on all data together indicates that most variation in the data set is correlated with changes in rank (variables which vary with rank include carbon, oxygen, calorific value, moisture, volatile matter, and reflectance). The maceral groups account for the next greatest amount of variation. Nitrogen and sulfur are each independent of all other variables. A cluster analysis indicates that the data set represents a continuum with no distinct groups; however, the data set may be dissected into four groups distinguished from each other on the basis of rank, on the relative proportions of the maceral groups, and on the organic sulfur content. Factor analyses of the individual groups provide insights into coalification at various stages of rank.

  6. The Pedregal granite (Portugal: petrographic and geochemical characterization of a peculiar granitoid

    Directory of Open Access Journals (Sweden)

    Ferreira, J. A.

    2014-12-01

    Full Text Available The Pedregal granite outcrops in the Central Iberian Zone, northern Portugal, in the eastern border of a synorogenic variscan granite-migmatite complex sub-concordant with the regional metamorphic structures. It is a granitoid (ca. 3 km2 with an elongated NW-SE shape intruded in staurolite-micaschist and banded gneiss-migmatite rocks, with local igneous breccias in the contact. The country rocks belong to a metapelitic and metasammitic sequence of Edicarian-Cambrian age, known as the “Complexo Xisto-Grauváquico” (CXG which shows a main regional foliation with a NW-SE to NNW-SSE direction. The Pedregal granite is peraluminous (its A/CNK parameter ranges from 1.18 to 1.62, with a magnesian and alkali to alkali-calcic signature. The peculiar features of the granite are high contents of Zr (389 to 435 ppm and a LREE flat pattern, which are uncommon characteristics for granitic rocks, as well as the corroded shape of the biotite, and the large amount of secondary muscovite. These peculiar features distinguish it from the adjacent synorogenic granites. The field, petrographical and chemical features of the Pedregal granite are in accordance with a second phase of partial melting of a residuum, depleted by melt segregation during a first melting episode with the involvement of peritectic garnet and abundant residual biotite with LREE- and Zr-bearing accessory minerals. Besides, the intrusive character of the granite, and the presence of metasedimentary xenoliths point out to a secondary diatexite.El granito de Pedregal aflora en la Zona Centro-Ibérica, en el norte de Portugal, en el borde oriental de un complejo granito-migmatítico sinorogénico varisco, subconcordante con las estructuras metamórficas regionales. Es un granitoide (ca. 3 km2 de forma elongada NW-SE, que intruye en micaesquistos estaurolíticos y en rocas gneissico- migmatíticas bandeadas, con brechas ígneas locales en el contacto. Las rocas encajantes pertenecen a una

  7. Radioactive waste isolation in salt: peer review of the Texas Bureau of Economic Geology's report on the Petrographic, Stratigraphic, and Structural Evidence for Dissolution of Upper Permian Bedded Salt, Texas Panhandle

    International Nuclear Information System (INIS)

    Fenster, D.F.; Anderson, R.Y.; Gonzales, S.; Baker, V.R.; Edgar, D.E.; Harrison, W.

    1984-08-01

    The following recommendations for improving the Texas Bureau of Economic Geology (TBEG) report entitled Petrographic, Stratigraphic, and Structural Evidence for Dissolution of Upper Permian Bedded Salt, Texas Panhandle have been abstracted from the body of this review report. The TBEG report should be resided to conform to one of the following alternatives: (1) If the report is intended to be a review or summary of previous work, it should contain more raw data, be edited to give equal treatment to all types of data, and include summary tables and additional figures. (2) If the report is intended to be a description and interpretation of petrographic evidence for salt dissolution, supported by collateral stratigraphic and structural evidence, the relevant indirect and direct data should become the focal point of the report. The following recommendations apply to one or both of the options listed above. (1) The text should differentiate more carefully between the data and inferences based on those data. (2) The authors should retain the qualifiers present in cited works. Statements in the report that are based on earlier papers are sometimes stronger than those in the papers themselves. (3) The next revision should present more complete data. (4) The authors should achieve a more balanced presentation of alternative hypotheses and interpretations. They could then discuss the relative merits of the alternative interpretations. (5) More attention should be given to clear exposition

  8. Research of Stability Problems on Ankara-Konya High Speed Railway Line (Turkey) using Ground Penetrating Radar and Petrographical Methods

    Science.gov (United States)

    Kadioglu, S.; Kadioglu, Y. K.

    2012-04-01

    . The petrographical studies and GPR results indicated that the areas with Jurassic alloctonous limestones thrusted on the ophiolitic rocks had deep and large fractures and cavities. The resulted radargrams indicated the thrust fault locations under the rail line. This limestone did not have a root and did not have big thickness. Therefore, the limestone could be move on the ophiolitic serpentinite unit. There were approximately horizontal and thin fracture segments under some parts of the tunnel nearly 8m in depth. There was an important collapsed zone filled up before. At the same time, there were thin and short fractures in the Jurassic limestone under the tunnel which was seen clearly on the radargrams. However, it was appeared that the hazard could not me removed completely because of the horizontal fracture. The areas with lacustrine limestones included disordered small fractures. Finally some areas had terra rossa because of the results of a large karstification. These areas could cause soil liquefaction during rainy season. The stability of these areas has to be controlled with ordered small periods.

  9. Cost-Utility Analysis of Extending Public Health Insurance Coverage to Include Diabetic Retinopathy Screening by Optometrists.

    Science.gov (United States)

    van Katwyk, Sasha; Jin, Ya-Ping; Trope, Graham E; Buys, Yvonne; Masucci, Lisa; Wedge, Richard; Flanagan, John; Brent, Michael H; El-Defrawy, Sherif; Tu, Hong Anh; Thavorn, Kednapa

    2017-09-01

    Diabetic retinopathy (DR) is one of the leading causes of vision loss and blindness in Canada. Eye examinations play an important role in early detection. However, DR screening by optometrists is not always universally covered by public or private health insurance plans. This study assessed whether expanding public health coverage to include diabetic eye examinations for retinopathy by optometrists is cost-effective from the perspective of the health care system. We conducted a cost-utility analysis of extended coverage for diabetic eye examinations in Prince Edward Island to include examinations by optometrists, not currently publicly covered. We used a Markov chain to simulate disease burden based on eye examination rates and DR progression over a 30-year time horizon. Results were presented as an incremental cost per quality-adjusted life year (QALY) gained. A series of one-way and probabilistic sensitivity analyses were performed. Extending public health coverage to eye examinations by optometrists was associated with higher costs ($9,908,543.32) and improved QALYs (156,862.44), over 30 years, resulting in an incremental cost-effectiveness ratio of $1668.43/QALY gained. Sensitivity analysis showed that the most influential determinants of the results were the cost of optometric screening and selected utility scores. At the commonly used threshold of $50,000/QALY, the probability that the new policy was cost-effective was 99.99%. Extending public health coverage to eye examinations by optometrists is cost-effective based on a commonly used threshold of $50,000/QALY. Findings from this study can inform the decision to expand public-insured optometric services for patients with diabetes. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  10. INCLUDING RISK IN ECONOMIC FEASIBILITY ANALYSIS:A STOCHASTIC SIMULATION MODEL FOR BLUEBERRY INVESTMENT DECISIONS IN CHILE

    Directory of Open Access Journals (Sweden)

    GERMÁN LOBOS

    2015-12-01

    Full Text Available ABSTRACT The traditional method of net present value (NPV to analyze the economic profitability of an investment (based on a deterministic approach does not adequately represent the implicit risk associated with different but correlated input variables. Using a stochastic simulation approach for evaluating the profitability of blueberry (Vaccinium corymbosum L. production in Chile, the objective of this study is to illustrate the complexity of including risk in economic feasibility analysis when the project is subject to several but correlated risks. The results of the simulation analysis suggest that the non-inclusion of the intratemporal correlation between input variables underestimate the risk associated with investment decisions. The methodological contribution of this study illustrates the complexity of the interrelationships between uncertain variables and their impact on the convenience of carrying out this type of business in Chile. The steps for the analysis of economic viability were: First, adjusted probability distributions for stochastic input variables (SIV were simulated and validated. Second, the random values of SIV were used to calculate random values of variables such as production, revenues, costs, depreciation, taxes and net cash flows. Third, the complete stochastic model was simulated with 10,000 iterations using random values for SIV. This result gave information to estimate the probability distributions of the stochastic output variables (SOV such as the net present value, internal rate of return, value at risk, average cost of production, contribution margin and return on capital. Fourth, the complete stochastic model simulation results were used to analyze alternative scenarios and provide the results to decision makers in the form of probabilities, probability distributions, and for the SOV probabilistic forecasts. The main conclusion shown that this project is a profitable alternative investment in fruit trees in

  11. Is Serum Hypovitaminosis D Associated with Chronic Widespread Pain Including Fibromyalgia? A Meta-analysis of Observational Studies.

    Science.gov (United States)

    Hsiao, Ming-Yen; Hung, Chen-Yu; Chang, Ke-Vin; Han, Der-Sheng; Wang, Tyng-Guey

    2015-01-01

    Chronic widespread pain (CWP) is a global musculoskeletal disorder leading to disability and a reduced quality of life. Low levels of serum vitamin D has long been proposed to be associated with CWP, but previous research remains inconclusive. To determine whether hypovitaminosis D was independently associated with CWP. Meta-analysis of observational study. Electronic databases were searched for studies published up to November 2014 comparing the prevalence of hypovitaminosis D and serum vitamin D levels between participants with and without CWP. The crude and adjusted odds ratios (ORs) of hypovitaminosis D with CWP were calculated. Subgroup analysis according to gender, threshold of hypovitaminosis, and definition of patients was performed, as well as meta-regression to test the linear relationship between crude ORs and the latitude of study locations. Twelve studies were included, comprising 1,854 patients with CWP. The patient group showed a significantly higher risk of hypovitaminosis D than the control group (crude OR, 1.63; 95% CI, 1.20-2.23). The association was slightly attenuated after adjusting confounders, with a pooled adjusted OR of 1.41 (95% CI, 1.00-2.00). There was an increase in ORs of hypovitaminosis D using a lower diagnostic value of serum vitamin D (8 and 10 ng/mL). The subgroup analysis according to gender and definition of CWP did not reveal significant between-group differences. The meta-regression showed no linear relationship between latitude and the crude ORs. There was a positive crude association between hypovitaminosis D and CWP, and the association was likely to remain after adjusting confounding factors. Use of a cut-off value of hypovitaminosis D (8-10 ng/mL) could better define the population with and without CWP. Further prospective follow-up studies are warranted to clarify the causal relationship between hypovitaminosis D and CWP.

  12. Including People with Dementia in Research: An Analysis of Australian Ethical and Legal Rules and Recommendations for Reform.

    Science.gov (United States)

    Ries, Nola M; Thompson, Katie A; Lowe, Michael

    2017-09-01

    Research is crucial to advancing knowledge about dementia, yet the burden of the disease currently outpaces research activity. Research often excludes people with dementia and other cognitive impairments because researchers and ethics committees are concerned about issues related to capacity, consent, and substitute decision-making. In Australia, participation in research by people with cognitive impairment is governed by a national ethics statement and a patchwork of state and territorial laws that have widely varying rules. We contend that this legislative variation precludes a consistent approach to research governance and participation and hinders research that seeks to include people with impaired capacity. In this paper, we present key ethical principles, provide a comprehensive review of applicable legal rules in Australian states and territories, and highlight significant differences and ambiguities. Our analysis includes recommendations for reform to improve clarity and consistency in the law and reduce barriers that may exclude persons with dementia from participating in ethically approved research. Our recommendations seek to advance the national decision-making principles recommended by the Australian Law Reform Commission, which emphasize the rights of all adults to make their own decisions and for those with impaired capacity to have access to appropriate supports to help them make decisions that affect their lives.

  13. Elevation of sulfatides in ovarian cancer: An integrated transcriptomic and lipidomic analysis including tissue-imaging mass spectrometry

    Directory of Open Access Journals (Sweden)

    McDonald John F

    2010-07-01

    Full Text Available Abstract Background Sulfatides (ST are a category of sulfated galactosylceramides (GalCer that are elevated in many types of cancer including, possibly, ovarian cancer. Previous evidence for elevation of ST in ovarian cancer was based on a colorimetric reagent that does not provide structural details and can also react with other lipids. Therefore, this study utilized mass spectrometry for a structure-specific and quantitative analysis of the types, amounts, and tissue localization of ST in ovarian cancer, and combined these findings with analysis of mRNAs for the relevant enzymes of ST metabolism to explore possible mechanisms. Results Analysis of 12 ovarian tissues graded as histologically normal or having epithelial ovarian tumors by liquid chromatography electrospray ionization-tandem mass spectrometry (LC ESI-MS/MS established that most tumor-bearing tissues have higher amounts of ST. Because ovarian cancer tissues are comprised of many different cell types, histological tissue slices were analyzed by matrix-assisted laser desorption ionization-tissue-imaging MS (MALDI-TIMS. The regions where ST were detected by MALDI-TIMS overlapped with the ovarian epithelial carcinoma as identified by H & E staining and histological scoring. Furthermore, the structures for the most prevalent species observed via MALDI-TIMS (d18:1/C16:0-, d18:1/C24:1- and d18:1/C24:0-ST were confirmed by MALDI-TIMS/MS, whereas, a neighboring ion(m/z 885.6 that was not tumor specific was identified as a phosphatidylinositol. Microarray analysis of mRNAs collected using laser capture microdissection revealed that expression of GalCer synthase and Gal3ST1 (3'-phosphoadenosine-5'-phosphosulfate:GalCer sulfotransferase were approximately 11- and 3.5-fold higher, respectively, in the ovarian epithelial carcinoma cells versus normal ovarian stromal tissue, and they were 5- and 2.3-fold higher in comparison with normal surface ovarian epithelial cells, which is a likely

  14. The volcanic aggregate of ancient Roman mortars from the Capitoline Hill: Petrographic criteria for identification of Rome's "pozzolans" and historical implications

    Science.gov (United States)

    Marra, Fabrizio; Danti, Alberto; Gaeta, Mario

    2015-12-01

    We present a petrographic study of the pyroclastic-flow deposits used to produce mortar aggregates (Pozzolane Rosse, Pozzolane Nere, and Pozzolanelle), as well as dimension stones (Tufo del Palatino and Tufo Lionato) in ancient Roman times, in which we describe the characteristic textures and mineralogic assemblages of their juvenile fraction. This petrographic dataset is employed to compare and classify, through observation in thin section at the optical microscope, and complementary trace-element analyses, as well as EMP analyses on matrix glass on archaeological and bulk natural samples, the composition of the volcanic aggregate of 11 samples of ancient Roman mortars collected from several archaeological structures excavated on the Capitoline Hill. By means of the combined petrographic and geochemical identification criteria illustrated in this work, we recognize two main types of mortar aggregates characteristic of the Republican and Imperial ages, respectively, and a third type pertaining to the mediaeval epoch.

  15. Combining Antidepressants in Acute Treatment of Depression: A Meta-Analysis of 38 Studies Including 4511 Patients

    Science.gov (United States)

    Henssler, Jonathan; Bschor, Tom

    2016-01-01

    Objective: Combining antidepressants (ADs) for therapy of acute depression is frequently employed, but randomized studies have yielded conflicting results. We conducted a systematic review and meta-analysis aimed at determining efficacy and tolerability of combination therapy. Methods: MEDLINE, Embase, PsycINFO, and CENTRAL databases were systematically searched through March 2014 for controlled studies comparing combinations of ADs with AD monotherapy in adult patients suffering from acute depression. The prespecified primary outcome was standardized mean difference (SMD), secondary outcomes were response, remission, and dropouts. Results: Among 8688 articles screened, 38 studies were eligible, including 4511 patients. Combination treatment was statistically, significantly superior to monotherapy (SMD 0.29; 95% CI 0.16 to 0.42). During monotherapy, slightly fewer patients dropped out due to adverse events (OR 0.90; 95% CI 0.53 to 1.53). Studies were heterogeneous (I2 = 63%), and there was indication of moderate publication bias (fail-safe N for an effect of 0.1:44), but results remained robust across prespecified secondary outcomes and subgroups, including analyses restricted to randomized controlled trials and low risk of bias studies. Meta-regression revealed an association of SMD with difference in imipramine-equivalent dose. Combining a reuptake inhibitor with an antagonist of presynaptic α2-autoreceptors was superior to other combinations. Conclusion: Combining ADs seems to be superior to monotherapy with only slightly more patients dropping out. Combining a reuptake inhibitor with an antagonist of presynaptic α2-autoreceptors seems to be significantly more effective than other combinations. Overall, our search revealed a dearth of well-designed studies. PMID:27582451

  16. Combining Antidepressants in Acute Treatment of Depression: A Meta-Analysis of 38 Studies Including 4511 Patients.

    Science.gov (United States)

    Henssler, Jonathan; Bschor, Tom; Baethge, Christopher

    2016-01-01

    Combining antidepressants (ADs) for therapy of acute depression is frequently employed, but randomized studies have yielded conflicting results. We conducted a systematic review and meta-analysis aimed at determining efficacy and tolerability of combination therapy. MEDLINE, Embase, PsycINFO, and CENTRAL databases were systematically searched through March 2014 for controlled studies comparing combinations of ADs with AD monotherapy in adult patients suffering from acute depression. The prespecified primary outcome was standardized mean difference (SMD), secondary outcomes were response, remission, and dropouts. Among 8688 articles screened, 38 studies were eligible, including 4511 patients. Combination treatment was statistically, significantly superior to monotherapy (SMD 0.29; 95% CI 0.16 to 0.42). During monotherapy, slightly fewer patients dropped out due to adverse events (OR 0.90; 95% CI 0.53 to 1.53). Studies were heterogeneous (I(2) = 63%), and there was indication of moderate publication bias (fail-safe N for an effect of 0.1:44), but results remained robust across prespecified secondary outcomes and subgroups, including analyses restricted to randomized controlled trials and low risk of bias studies. Meta-regression revealed an association of SMD with difference in imipramine-equivalent dose. Combining a reuptake inhibitor with an antagonist of presynaptic α2-autoreceptors was superior to other combinations. Combining ADs seems to be superior to monotherapy with only slightly more patients dropping out. Combining a reuptake inhibitor with an antagonist of presynaptic α2-autoreceptors seems to be significantly more effective than other combinations. Overall, our search revealed a dearth of well-designed studies. © The Author(s) 2016.

  17. Finite Element Modeling and Analysis of Nonlinear Impact and Frictional Motion Responses Including Fluid—Structure Coupling Effects

    Directory of Open Access Journals (Sweden)

    Yong Zhao

    1997-01-01

    Full Text Available A nonlinear three dimensional (3D single rack model and a nonlinear 3D whole pool multi-rack model are developed for the spent fuel storage racks of a nuclear power plant (NPP to determine impacts and frictional motion responses when subjected to 3D excitations from the supporting building floor. The submerged free standing rack system and surrounding water are coupled due to hydrodynamic fluid-structure interaction (FSI using potential theory. The models developed have features that allow consideration of geometric and material nonlinearities including (1 the impacts of fuel assemblies to rack cells, a rack to adjacent racks or pool walls, and rack support legs to the pool floor; (2 the hydrodynamic coupling of fuel assemblies with their storing racks, and of a rack with adjacent racks, pool walls, and the pool floor; and (3 the dynamic motion behavior of rocking, twisting, and frictional sliding of rack modules. Using these models 3D nonlinear time history dynamic analyses are performed per the U.S. Nuclear Regulatory Commission (USNRC criteria. Since few such modeling, analyses, and results using both the 3D single and whole pool multiple rack models are available in the literature, this paper emphasizes description of modeling and analysis techniques using the SOLVIA general purpose nonlinear finite element code. Typical response results with different Coulomb friction coefficients are presented and discussed.

  18. Transcriptome analysis of the spalax hypoxia survival response includes suppression of apoptosis and tight control of angiogenesis

    Directory of Open Access Journals (Sweden)

    Malik Assaf

    2012-11-01

    Full Text Available Abstract Background The development of complex responses to hypoxia has played a key role in the evolution of mammals, as inadequate response to this condition is frequently associated with cardiovascular diseases, developmental disorders, and cancers. Though numerous studies have used mice and rats in order to explore mechanisms that contribute to hypoxia tolerance, these studies are limited due to the high sensitivity of most rodents to severe hypoxia. The blind subterranean mole rat Spalax is a hypoxia tolerant rodent, which exhibits unique longevity and therefore has invaluable potential in hypoxia and cancer research. Results Using microarrays, transcript abundance was measured in brain and muscle tissues from Spalax and rat individuals exposed to acute and chronic hypoxia for varying durations. We found that Spalax global gene expression response to hypoxia differs from that of rat and is characterized by the activation of functional groups of genes that have not been strongly associated with the response to hypoxia in hypoxia sensitive mammals. Using functional enrichment analysis of Spalax hypoxia induced genes we found highly significant overrepresentation of groups of genes involved in anti apoptosis, cancer, embryonic/sexual development, epidermal growth factor receptor binding, coordinated suppression and activation of distinct groups of transcription factors and membrane receptors, in addition to angiogenic related processes. We also detected hypoxia induced increases of different critical Spalax hub gene transcripts, including antiangiogenic genes associated with cancer tolerance in Down syndrome human individuals. Conclusions This is the most comprehensive study of Spalax large scale gene expression response to hypoxia to date, and the first to use custom Spalax microarrays. Our work presents novel patterns that may underlie mechanisms with critical importance to the evolution of hypoxia tolerance, with special relevance to

  19. Pore facies analysis: incorporation of rock properties into pore geometry based classes in a Permo-Triassic carbonate reservoir in the Persian Gulf

    International Nuclear Information System (INIS)

    Rahimpour-Bonab, H; Aliakbardoust, E

    2014-01-01

    Pore facies analysis is a useful method for the classification of reservoir rocks according to pore geometry characteristics. The importance of this method is related to the dependence of the dynamic behaviour of the reservoir rock on the pore geometry. In this study, pore facies analysis was performed by the quantification and classification of the mercury injection capillary pressure (MICP) curves applying the multi-resolution graph-based clustering (MRGC) method. Each pore facies includes a limited variety of rock samples with different depositional fabrics and diagenetic histories, which are representative of one type of pore geometry. The present pore geometry is the result of the interaction between the primary rock fabric and its diagenetic overprint. Thus the variations in petrographic properties can be correlated with the pore geometry characteristics. Accordingly, the controlling parameters in the pore geometry characteristics were revealed by detailed petrographic analysis in each pore facies. The reservoir rock samples were then classified using the determined petrographic properties which control the pore system quality. This method is proposed for the classification of reservoir rocks in complicated carbonate reservoirs, in order to reduce the incompatibility of traditional facies analysis with pore system characteristics. The method is applicable where enough capillary pressure data is not available. (papers)

  20. A comparative analysis of Photovoltaic Technological Innovation Systems including international dimensions: the cases of Japan and The Netherlands

    NARCIS (Netherlands)

    Vasseur, V.; Kamp, L.M.; Negro, S.O.

    2013-01-01

    This paper investigates the development and diffusion of photovoltaic (PV) technology in Japan and The Netherlands. Both cases are analysed with the Technological Innovation Systems (TIS) framework, which focuses on a particular technology and includes all those factors that influence the

  1. Petrographic Composition of Lignite from the Lake Somerville Spillway (East-central Texas)

    Science.gov (United States)

    Pawelec, Sandra; Bielowicz, Barbara

    2017-12-01

    In the presented paper, the macroscopic and microscopic composition of lignite from Lake Somerville Spillway has been examined. The study area is the upper part of the Manning Formation, located north-west of Somerville in the central-eastern part of Texas. There are three exposures: NE, SW and MC (Main Central) with visible parts of late-Eocene lignite seams belonging to the Jackson Group. The Manning section is divided into four marine dominated parasequences (P1 through P4). Lignite samples outlining the P1 parasequence from the MC and NE outcrops and the argillate sample from the lower part of the P2 parasequence, NE outcrop. Macroscopic characterization was carried out based on lithological classifications of humic coal. On this basis, it has been shown that the main lithotype occurring in the deposit is detritic (matrix) coal with a high share of mineral matter. The maceral composition of coal was determined according to the ICCP guidelines. The macerals from liptinite group were determined under fluorescent light. The maceral group content analysis was performed with use of 500-600 equally spaced points on the surface of the polished sections. It has been found that the examined coal is dominated by macerals from the huminite group, with a share ranging from 20.8 to 65.3% volume, including atrinite (9.8-22.8% volume, 17.5% volume on average). In the examined coal, macerals from the inertinite group (10.1 to 44.8%), especially semifusinite (max. 13.9%), fusinite (max. 9.3%) and funginite (max. 6.3 %) are of particularly large share. In the liptinite group, particular attention was paid to the content of alginite (max. 4.5%) and bituminite (max. 1.3 %), which indicate the paralic sedimentation environment of the examined coal. Additionally, the variability of macerals and maceral groups within the exposures and levels of the P1 parasequence was examined. The last step was to compare lignite from Lake Somerville Spillway with other lignites belonging to the

  2. ICECON: a computer program used to calculate containment back pressure for LOCA analysis (including ice condenser plants)

    International Nuclear Information System (INIS)

    1976-07-01

    The ICECON computer code provides a method for conservatively calculating the long term back pressure transient in the containment resulting from a hypothetical Loss-of-Coolant Accident (LOCA) for PWR plants including ice condenser containment systems. The ICECON computer code was developed from the CONTEMPT/LT-022 code. A brief discussion of the salient features of a typical ice condenser containment is presented. Details of the ice condenser models are explained. The corrections and improvements made to CONTEMPT/LT-022 are included. The organization of the code, including the calculational procedure, is outlined. The user's manual, to be used in conjunction with the CONTEMPT/LT-022 user's manual, a sample problem, a time-step study (solution convergence) and a comparison of ICECON results with the results of the NSSS vendor are presented. In general, containment pressure calculated with the ICECON code agree with those calculated by the NSSS vendor using the same mass and energy release rates to the containment

  3. Metal load assessment in patient pulmonary lavages: towards a comprehensive mineralogical analysis including the nano-sized fraction.

    Science.gov (United States)

    Forest, Valérie; Vergnon, Jean-Michel; Guibert, Cyril; Bitounis, Dimitrios; Leclerc, Lara; Sarry, Gwendoline; Pourchez, Jérémie

    Mineralogical analyses of clinical samples have been proved useful to identify causal relationship between exposure to airborne particles and pulmonary diseases. The most striking example is asbestosis where the assessment of asbestos bodies in patient lung samples has allowed defining values specific of pathologies. However, this type of analyses only considers the micro-sized fraction of the particles, neglecting the specific impact of nano-sized particles which have been otherwise shown to be reactive and able to induce biological effects. Similarly, in nanotoxicology, the mineralogical analysis of pulmonary fluids could be used as an indicator of exposure to inhaled nanoparticles and could help investigations on the relationship between exposure to these nanoparticles and lung diseases. We designed this study first to demonstrate the technical feasibility of this approach, then to get a clear picture of the metals present, and in what form, in patient lungs and finally to determine if indeed it is worth investigating separately the micro, sub-micro and nano fractions. Broncho-alveolar lavages were recovered from 100 patients suffering from interstitial lung diseases. A protocol was specifically developed to isolate three fractions containing respectively microparticles, sub-microparticles and nanoparticles with ions. The metal content in each fraction was qualitatively and quantitatively characterized. Results showed significant differences between the three fractions in terms of metal load confirming that the separate analysis of the fractions is relevant. It also means that the assessment of the micro-sized fraction alone, as commonly done in clinical practice, only gives a partial view of the mineralogical analysis.

  4. The Prognostic Significance of Pretreatment Serum CEA Levels in Gastric Cancer: A Meta-Analysis Including 14651 Patients

    Science.gov (United States)

    Deng, Kai; Yang, Li; Hu, Bing; Wu, Hao; Zhu, Hong; Tang, Chengwei

    2015-01-01

    Background Carcinoembryonic antigen (CEA) is commonly used as a serum tumor marker in clinical practice; however, its prognostic value for gastric cancer patients remains uncertain. This meta-analysis was performed to assess the prognostic value of CEA and investigate CEA as a tumor marker. Methods PubMed, EMBASE and other databases were searched for potentially eligible studies. Forty-one studies reporting the prognostic effect of pretreatment serum CEA expression in gastric cancer patients were selected. Data on 14651 eligible patients were retrieved for the meta-analysis. Based on the data extracted from the available literature, the hazard ratio (HR) and 95% confidence interval (CI) for an adverse prognosis were estimated for gastric cancer patients with elevated pretreatment serum levels of CEA (CEA+) relative to patients with normal pretreatment CEA levels (CEA-). Results The CEA+ patients had a significantly poorer prognosis than the CEA- patients in terms of overall survival (OS: HR 1.716, 95% CI 1.594 - 1.848, P 0.05). In the pooled analyses of multivariate-adjusted HRs, the results suggested that pretreatment serum CEA may be an independent prognostic factor in gastric cancer (OS: HR 1.681, 95% CI 1.425 - 1.982; DSS: HR 1.900, 95% CI 1.441 - 2.505; DFS: HR 2.579, 95% CI 1.935 - 3.436). Conclusion/Significance The meta-analysis based on the available literature supported the association of elevated pretreatment serum CEA levels with a poor prognosis for gastric cancer and a nearly doubled risk of mortality in gastric cancer patients. CEA may be an independent prognostic factor for gastric cancer patients and may aid in determining appropriate treatment which may preferentially benefit the CEA+ patients. PMID:25879931

  5. Extended automated separation techniques in destructive neutron activation analysis; application to various biological materials, including human tissues and blood

    International Nuclear Information System (INIS)

    Tjioe, P.S.; Goeij, J.J.M. de; Houtman, J.P.W.

    1976-09-01

    Neutron activation analysis may be performed as a multi-element and low-level technique for many important trace elements in biological materials, provided that post-irradiation chemical separations are applied. This paper describes a chemical separation consisting of automated procedures for destruction, distillation, and anion-chromatography. The system developed enables the determination of 14 trace elements in biological materials, viz. antimony, arsenic, bromine, cadmium, chromium, cobalt, copper, gold, iron, mercury, molybdenum, nickel, selenium, and zinc. The aspects of sample preparation, neutron irradiation, gamma-spectrum evaluation, and blank-value contribution are also discussed

  6. Biomechanical analysis of a salt-modified polyvinyl alcohol hydrogel for knee meniscus applications, including comparison with human donor samples.

    Science.gov (United States)

    Hayes, Jennifer C; Curley, Colin; Tierney, Paul; Kennedy, James E

    2016-03-01

    The primary objective of this research was the biomechanical analysis of a salt-modified polyvinyl alcohol hydrogel, in order to assess its potential for use as an artificial meniscal implant. Aqueous polyvinyl alcohol (PVA) was treated with a sodium sulphate (Na2SO4) solution to precipitate out the polyvinyl alcohol resulting in a pliable hydrogel. The freeze-thaw process, a strictly physical method of crosslinking, was employed to crosslink the hydrogel. Development of a meniscal shaped mould and sample housing unit allowed the production of meniscal shaped hydrogels for direct comparison to human meniscal tissue. Results obtained show that compressive responses were slightly higher in PVA/Na2SO4 menisci, displaying maximum compressive loads of 2472N, 2482N and 2476N for samples having undergone 1, 3 and 5 freeze-thaw cycles respectively. When compared to the human meniscal tissue tested under the same conditions, an average maximum load of 2467.5N was observed. This suggests that the PVA/Na2SO4 menisci are mechanically comparable to the human meniscus. Biocompatibility analysis of PVA/Na2SO4 hydrogels revealed no acute cytotoxicity. The work described herein has innovative potential in load bearing applications, specifically as an alternative to meniscectomy as replacement of critically damaged meniscal tissue in the knee joint where repair is not viable. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. Analysis of Two Stroke Marine Diesel Engine Operation Including Turbocharger Cut-Out by Using a Zero-Dimensional Model

    Directory of Open Access Journals (Sweden)

    Cong Guan

    2015-06-01

    Full Text Available In this article, the operation of a large two-stroke marine diesel engine including various cases with turbocharger cut-out was thoroughly investigated by using a modular zero-dimensional engine model built in MATLAB/Simulink environment. The model was developed by using as a basis an in-house modular mean value engine model, in which the existing cylinder block was replaced by a more detailed one that is capable of representing the scavenging ports-cylinder-exhaust valve processes. Simulation of the engine operation at steady state conditions was performed and the derived engine performance parameters were compared with the respective values obtained by the engine shop trials. The investigation of engine operation under turbocharger cut-out conditions in the region from 10% to 50% load was carried out and the influence of turbocharger cut-out on engine performance including the in-cylinder parameters was comprehensively studied. The recommended schedule for the combination of the turbocharger cut-out and blower activation was discussed for the engine operation under part load conditions. Finally, the influence of engine operating strategies on the annual fuel savings, CO2 emissions reduction and blower operating hours for a Panamax container ship operating at slow steaming conditions is presented and discussed.

  8. Effect of antidepressants and psychological therapies, including hypnotherapy, in irritable bowel syndrome: systematic review and meta-analysis.

    Science.gov (United States)

    Ford, Alexander C; Quigley, Eamonn M M; Lacy, Brian E; Lembo, Anthony J; Saito, Yuri A; Schiller, Lawrence R; Soffer, Edy E; Spiegel, Brennan M R; Moayyedi, Paul

    2014-09-01

    Irritable bowel syndrome (IBS) is a chronic functional gastrointestinal disorder. Evidence relating to the treatment of this condition with antidepressants and psychological therapies continues to accumulate. We performed an updated systematic review and meta-analysis of randomized controlled trials (RCTs). MEDLINE, EMBASE, and the Cochrane Controlled Trials Register were searched (up to December 2013). Trials recruiting adults with IBS, which compared antidepressants with placebo, or psychological therapies with control therapy or "usual management," were eligible. Dichotomous symptom data were pooled to obtain a relative risk (RR) of remaining symptomatic after therapy, with a 95% confidence interval (CI). The search strategy identified 3,788 citations. Forty-eight RCTs were eligible for inclusion: thirty-one compared psychological therapies with control therapy or "usual management," sixteen compared antidepressants with placebo, and one compared both psychological therapy and antidepressants with placebo. Ten of the trials of psychological therapies, and four of the RCTs of antidepressants, had been published since our previous meta-analysis. The RR of IBS symptom not improving with antidepressants vs. placebo was 0.67 (95% CI=0.58-0.77), with similar treatment effects for both tricyclic antidepressants and selective serotonin reuptake inhibitors. The RR of symptoms not improving with psychological therapies was 0.68 (95% CI=0.61-0.76). Cognitive behavioral therapy, hypnotherapy, multicomponent psychological therapy, and dynamic psychotherapy were all beneficial. Antidepressants and some psychological therapies are effective treatments for IBS. Despite the considerable number of studies published in the intervening 5 years since we last examined this issue, the overall summary estimates of treatment effect have remained remarkably stable.

  9. Comparative genomic analysis of the genus Staphylococcus including Staphylococcus aureus and its newly described sister species Staphylococcus simiae

    Science.gov (United States)

    2012-01-01

    Background Staphylococcus belongs to the Gram-positive low G + C content group of the Firmicutes division of bacteria. Staphylococcus aureus is an important human and veterinary pathogen that causes a broad spectrum of diseases, and has developed important multidrug resistant forms such as methicillin-resistant S. aureus (MRSA). Staphylococcus simiae was isolated from South American squirrel monkeys in 2000, and is a coagulase-negative bacterium, closely related, and possibly the sister group, to S. aureus. Comparative genomic analyses of closely related bacteria with different phenotypes can provide information relevant to understanding adaptation to host environment and mechanisms of pathogenicity. Results We determined a Roche/454 draft genome sequence for S. simiae and included it in comparative genomic analyses with 11 other Staphylococcus species including S. aureus. A genome based phylogeny of the genus confirms that S. simiae is the sister group to S. aureus and indicates that the most basal Staphylococcus lineage is Staphylococcus pseudintermedius, followed by Staphylococcus carnosus. Given the primary niche of these two latter taxa, compared to the other species in the genus, this phylogeny suggests that human adaptation evolved after the split of S. carnosus. The two coagulase-positive species (S. aureus and S. pseudintermedius) are not phylogenetically closest but share many virulence factors exclusively, suggesting that these genes were acquired by horizontal transfer. Enrichment in genes related to mobile elements such as prophage in S. aureus relative to S. simiae suggests that pathogenesis in the S. aureus group has developed by gene gain through horizontal transfer, after the split of S. aureus and S. simiae from their common ancestor. Conclusions Comparative genomic analyses across 12 Staphylococcus species provide hypotheses about lineages in which human adaptation has taken place and contributions of horizontal transfer in pathogenesis. PMID

  10. Analysis of quantum ballistic electron transport in ultrasmall silicon devices including space-charge and geometric effects

    Science.gov (United States)

    Laux, S. E.; Kumar, A.; Fischetti, M. V.

    2004-05-01

    A two-dimensional device simulation program which self consistently solves the Schrödinger and Poisson equations with current flow is described in detail. Significant approximations adopted in this work are the absence of scattering and a simple six-valley, parabolic band structure for silicon. A modified version of the quantum transmitting boundary method is used to describe open boundary conditions permitting current flow in device solutions far from equilibrium. The continuous energy spectrum of the system is discretized by temporarily imposing two different forms of closed boundary conditions, resulting in energies which sample the density-of-states and establish the wave function normalization conditions. These standing wave solutions ("normal modes") are decomposed into their traveling wave constituents, each of which represents injection from only one of the open boundary contacts ("traveling eigencomponents"). These current-carrying states are occupied by a drifted Fermi distribution associated with their injecting contact and summed to form the electron density in the device. Holes are neglected in this calculation. The Poisson equation is solved on the same finite element computational mesh as the Schrödinger equation; devices of arbitrary geometry can be modeled. Computational performance of the program including characterization of a "Broyden+Newton" algorithm employed in the iteration for self consistency is described. Device results are presented for a narrow silicon resonant tunneling diode (RTD) and many variants of idealized silicon double-gate field effect transistors (DGFETs). The RTD results show two resonant conduction peaks, each of which demonstrates hysteresis. Three 7.5 nm channel length DGFET structures with identical intrinsic device configurations but differing access geometries (straight, taper and "dog bone") are studied and found to have differing current flows owing to quantum-mechanical reflection in their access regions

  11. Analysis of scientific papers included in the sciences citation index expanded written by South korean plastic surgeons: 2001-2010.

    Science.gov (United States)

    Go, Ju Young; Mun, Goo-Hyun; Jeon, Byung-Joon; Lim, So-Young; Pyon, Jai-Kyong; Bang, Sa-Ik; Oh, Kap Sung; Shin, Myoung-Soo

    2012-01-01

    The purpose of our study was to analyze scientific papers published by South Korean plastic surgeons in journals included in the Science Citation Index Expanded (SCIE), and to evaluate the publication and research activities of Korean plastic surgeon. We conducted a survey of SCIE papers in the field of plastic surgery published by South Korean authors between 2001 and 2010 using Web of Science software. We further analyzed these results according to the number of publications per year, journals, institution, and type of papers. We also compared the total number of citations to published scientific papers. We analyzed the rank of South Korea among other countries in representative journals. Overall, 667 papers were published by South Korean authors between 2001 and 2010. The number of publications increased dramatically from 2003 (n=31) to 2010 (n=139). Subsequently, the ten most productive Korean medical colleges were identified. All published papers received 2,311 citations and the citation to paper ratio was 3.49. The rank of Korea among other countries in terms of the number of published papers remained in the top 10 during the recent 10 years. Publication output of Korean plastic surgeon over the last 10 years showed a remarkable growth in terms of quantity and quality. Currently, Korea is among the top six countries in representative plastic surgery journals. Korean plastic surgeons have played a central role in this progress, and it is anticipated that they will continue to do so in the future.

  12. Performance Analysis of a Six-Port Receiver in a WCDMA Communication System including a Multipath Fading Channel

    Directory of Open Access Journals (Sweden)

    A. O. Olopade

    2014-01-01

    Full Text Available Third generation communication systems require receivers with wide bandwidth of operation to support high transmission rates and are also reconfigurable to support various communication standards with different frequency bands. An ideal software defined radio (SDR will be the absolute answer to this requirement but it is not achievable with the current level of technology. This paper proposes the use of a six-port receiver (SPR front-end (FE in a WCDMA communication system. A WCDMA end-to-end physical layer MATLAB demo which includes a multipath channel distortion block is used to determine the viability of the six-port based receiver. The WCDMA signal after passing through a multipath channel is received using a constructed SPR FE. The baseband signal is then calibrated and corrected in MATLAB. The six-port receiver performance is measured in terms of bit error rate (BER. The signal-to-noise ratio (SNR of the transmitted IQ data is varied and the BER profile of the communication system is plotted. The effect of the multipath fading on the receiver performance and the accuracy of the calibration algorithm are obtained by comparing two different measured BER curves for different calibration techniques to the simulated BER curve of an ideal receiver.

  13. Analysis of the chromosome X exome in patients with autism spectrum disorders identified novel candidate genes, including TMLHE

    Science.gov (United States)

    Nava, C; Lamari, F; Héron, D; Mignot, C; Rastetter, A; Keren, B; Cohen, D; Faudet, A; Bouteiller, D; Gilleron, M; Jacquette, A; Whalen, S; Afenjar, A; Périsse, D; Laurent, C; Dupuits, C; Gautier, C; Gérard, M; Huguet, G; Caillet, S; Leheup, B; Leboyer, M; Gillberg, C; Delorme, R; Bourgeron, T; Brice, A; Depienne, C

    2012-01-01

    The striking excess of affected males in autism spectrum disorders (ASD) suggests that genes located on chromosome X contribute to the etiology of these disorders. To identify new X-linked genes associated with ASD, we analyzed the entire chromosome X exome by next-generation sequencing in 12 unrelated families with two affected males. Thirty-six possibly deleterious variants in 33 candidate genes were found, including PHF8 and HUWE1, previously implicated in intellectual disability (ID). A nonsense mutation in TMLHE, which encodes the ɛ-N-trimethyllysine hydroxylase catalyzing the first step of carnitine biosynthesis, was identified in two brothers with autism and ID. By screening the TMLHE coding sequence in 501 male patients with ASD, we identified two additional missense substitutions not found in controls and not reported in databases. Functional analyses confirmed that the mutations were associated with a loss-of-function and led to an increase in trimethyllysine, the precursor of carnitine biosynthesis, in the plasma of patients. This study supports the hypothesis that rare variants on the X chromosome are involved in the etiology of ASD and contribute to the sex-ratio disequilibrium. PMID:23092983

  14. Static response of coated microbubbles compressed between rigid plates: Simulations and asymptotic analysis including elastic and adhesive forces

    Science.gov (United States)

    Lytra, A.; Pelekasis, N.

    2018-03-01

    The static response of coated microbubbles is investigated with a novel approach employed for modeling contact between a microbubble and the cantilever of an atomic force microscope. Elastic tensions and moments are described via appropriate constitutive laws. The encapsulated gas is assumed to undergo isothermal variations. Due to the hydrophilic nature of the cantilever, an ultrathin aqueous film is formed, which transfers the force onto the shell. An interaction potential describes the local pressure applied on the shell. The problem is solved in axisymmetric form with the finite element method. The response is governed by the dimensionless bending, k^ b=kb/(χ R02 ), pressure, P^ A=(PAR0 )/χ , and interaction potential, W ^ =w0/χ . Hard polymeric shells have negligible resistance to gas compression, while for the softer lipid shells gas compressibility is comparable with shell elasticity. As the external force increases, numerical simulations reveal that the force versus deformation (f vs d) curve of polymeric shells exhibits a transition from the linear O(d) (Reissner) regime, marked by flattened shapes around the contact region, to a non-linear O(d1/2) (Pogorelov) regime dominated by shapes exhibiting crater formation due to buckling. When lipid shells are tested, buckling is bypassed as the external force increases and flattened shapes prevail in an initially linear f vs d curve. Transition to a curved upwards regime is observed as the force increases, where gas compression and area dilatation form the dominant balance providing a nonlinear regime with an O(d3) dependence. Asymptotic analysis recovers the above patterns and facilitates estimation of the shell mechanical properties.

  15. Hydrothermal alteration at the Roosevelt Hot Springs thermal area, Utah: Petrographic characterization of the alteration to 2 kilometers depth

    Energy Technology Data Exchange (ETDEWEB)

    Ballantyne, J.M.; Parry, W.T.

    1978-04-01

    Hydrothermal alteration in drill cuttings from Thermal Power drillhole 14-2, Roosevelt Hot Springs Thermal area, has been studied petrographically. The hole is sited in alluvium approximately 1.6 km southeast of the old Resort and was rotary drilled to a depth of 1866.0 m. The exact hole location is 2310 FNL, 350 FWL, Sec. 2, Twp 27S, Rge 9W, elevation 1908.5 m. Core was extracted from 792.5 to 795.5 m. Thin sections were made from samples at 15.2 m intervals of drill cuttings collected at 1.5 or 3.0 m intervals during drilling. Thin sections were made of 1.5 or 3.0 m intervals from 274.3 to 304.8 m, 487.9 to 581.2 m, and 868.7 to 899.2 m. These intervals were chosen for close spaced sampling on the basis of increases in temperature, porosity, conductivity and acoustic velocity shown in geophysical logs. A total of 153 thin sections of cuttings were made, and an additional 9 sections were made from the core. Depths of thin section samples are listed in the appendix. A visual estimate of the percentage of each rock type was made for each thin section.

  16. Petrographic characterization and provenance determination of the white marbles used in the Roman sculptures of Forum Sempronii (Fossombrone, Marche, Italy)

    Science.gov (United States)

    Antonelli, Fabrizio; Columbu, Stefano; Lezzerini, Marco; Miriello, Domenico

    2014-06-01

    The Roman municipium of Forum Sempronii (Fossombrone, Marche) was located along the `Via Consolare Flaminia', in the stretch of road where it ran along the final sector of the valley of the River Metauro ( Mataurus). The ancient colony of Forum Sempronii, which is cited by Strabo, Pliny, and Ptolemy, was found in the second century BC, probably on the site of an earlier community and its activity continued until the end of the fifth century AD. During ancient and more recent archaeological excavations, many fragments of coloured stones and marbles, and some white marble sculptures have been unearthed. In this paper, we report the results of the provenance identification of the white marbles used for the sculptures found in the archaeological site of Forum Sempronii and now displayed at the local archaeological museum. The determination of the source origin of the white marbles used for the sculptures has been established by mineralogical-petrographic and geochemical analyses. Microscopic study of thin sections together with carbon and oxygen stable isotope ratios indicate that more than one type of white marbles was used: Pentelikon, Lunense, and Thasian.

  17. Carbonate cements in contemporaneous beachrocks, Jaguaribe beach, Itamaracá island, northeastern Brazil: petrographic, geochemical and isotopic aspects

    Directory of Open Access Journals (Sweden)

    Guerra Núbia C.

    2005-01-01

    Full Text Available Holocene beachrocks of the Jaguaribe beach, State of Pernambuco, northeastern Brazil, consist of horizontal, cemented layers approximately 40 cm thick. The cement shows three textural varieties: (a calciferous, surrounding siliciclastic grains, (b micritic, with an acicular fringe; and (c cryptocrystalline calcite in pores. Early cementation took place at the water table below beach ridges, where geochemical, hydrodynamic and, perhaps, also microbiological conditions favored rapid precipitation of aragonite and/or high-Mg calcite. delta13C values range from -1.8 to +1.5? for dissolved carbonate in interstitial water and from +0.2 to +2.1? for bioclastic components. delta18O values range from -2.8 to +0.5? for seawater, freshwater and interstitial water. delta13C values and diagenetic features suggest that cementation occurred in meteoric-vadose and/or marine-phreatic water by loss of CO2 during evaporation of the interstitial water. Locally, superimposed low-Mg calcite cements point to subsequent freshwater influence. Total-rock cement composition of vertically stacked beachrock beds at the Jaguaribe beach shows that the highest beachrock bed is older than the one (of same petrographic composition situated at the current groundwater level. This implies a downward progression of cementation, which probably followed the sea-level fall after a local high stand.

  18. Tocilizumab use in pregnancy: Analysis of a global safety database including data from clinical trials and post-marketing data.

    Science.gov (United States)

    Hoeltzenbein, Maria; Beck, Evelin; Rajwanshi, Richa; Gøtestam Skorpen, Carina; Berber, Erhan; Schaefer, Christof; Østensen, Monika

    2016-10-01

    Analyze the cumulative evidence for pregnancy outcomes after maternal exposure to tocilizumab, an anti-interleukin-6-receptor monoclonal antibody used for the treatment of rheumatoid arthritis and juvenile idiopathic arthritis. At present, published experience on tocilizumab use during pregnancy is very limited. We have analyzed all pregnancy-related reports documented in the Roche Global Safety Database until December 31, 2014 (n = 501). After exclusion of ongoing pregnancies, duplicates, and cases retrieved from the literature, 399 women were found to have been exposed to tocilizumab shortly before or during pregnancy, with pregnancy outcomes being reported in 288 pregnancies (72.2%). Of these 288 pregnancies, 180 were prospectively reported resulting in 109 live births (60.6%), 39 spontaneous abortions (21.7%), 31 elective terminations of pregnancy (17.2%), and 1 stillbirth. The rate of malformations was 4.5%. Co-medications included methotrexate in 21.1% of the prospectively ascertained cases. Compared to the general population, an increased rate of preterm birth (31.2%) was observed. Retrospectively reported pregnancies (n = 108) resulted in 55 live births (50.9%), 31 spontaneous abortions (28.7%), and 22 elective terminations (20.4%). Three infants/fetuses with congenital anomalies were reported in this group. No increased risks for adverse pregnancy outcomes were observed after paternal exposure in 13 pregnancies with known outcome. No indication for a substantially increased malformation risk was observed. Considering the limitations of global safety databases, the data do not yet prove safety, but provide information for physicians and patients to make informed decisions. This is particularly important after inadvertent exposure to tocilizumab, shortly before or during early pregnancy. Copyright © 2016 Elsevier Inc. All rights reserved.

  19. One Dimensional Analysis Model of a Condensing Spray Chamber Including Rocket Exhaust Using SINDA/FLUINT and CEA

    Science.gov (United States)

    Sakowski, Barbara; Edwards, Daryl; Dickens, Kevin

    2014-01-01

    Modeling droplet condensation via CFD codes can be very tedious, time consuming, and inaccurate. CFD codes may be tedious and time consuming in terms of using Lagrangian particle tracking approaches or particle sizing bins. Also since many codes ignore conduction through the droplet and or the degradating effect of heat and mass transfer if noncondensible species are present, the solutions may be inaccurate. The modeling of a condensing spray chamber where the significant size of the water droplets and the time and distance these droplets take to fall, can make the effect of droplet conduction a physical factor that needs to be considered in the model. Furthermore the presence of even a relatively small amount of noncondensible has been shown to reduce the amount of condensation [Ref 1]. It is desirable then to create a modeling tool that addresses these issues. The path taken to create such a tool is illustrated. The application of this tool and subsequent results are based on the spray chamber in the Spacecraft Propulsion Research Facility (B2) located at NASA's Plum Brook Station that tested an RL-10 engine. The platform upon which the condensation physics is modeled is SINDAFLUINT. The use of SINDAFLUINT enables the ability to model various aspects of the entire testing facility, including the rocket exhaust duct flow and heat transfer to the exhaust duct wall. The ejector pumping system of the spray chamber is also easily implemented via SINDAFLUINT. The goal is to create a transient one dimensional flow and heat transfer model beginning at the rocket, continuing through the condensing spray chamber, and finally ending with the ejector pumping system. However the model of the condensing spray chamber may be run independently of the rocket and ejector systems detail, with only appropriate mass flow boundary conditions placed at the entrance and exit of the condensing spray chamber model. The model of the condensing spray chamber takes into account droplet

  20. Comprehensive capacitance-voltage analysis including quantum effects for high-k interfaces on germanium and other alternative channel materials

    Science.gov (United States)

    Anwar, Sarkar R. M.

    High mobility alternative channel materials to silicon are critical to the continued scaling of metal oxide semiconductor (MOS) devices. However, before they can be incorporated into advanced devices, some major issues need to be solved. The high mobility materials suffer from lower allowable thermal budgets compared to Si (before desorption and defect formation becomes an issue) and the absence of a good quality native oxide has further increased the interest in the use of high-k dielectrics. However, the high interface state density and high electric fields at these semiconductor/high-k interfaces can significantly impact the capacitance-voltage (C-V) profile, and current C-V modeling software cannot account for these effects. This in turn affects the parameters extracted from the C-V data of the high mobility semiconductor/high-k interface, which are crucial to fully understand the interface properties and expedite process development. To address this issue, we developed a model which takes into account quantum corrections which can be applied to a number of these alternative channel materials including SixGe1-x, Ge, InGaAs, and GaAs. The C-V simulation using this QM correction model is orders of magnitude faster compared to a full band Schrodinger-Poisson solver. The simulated C-V is directly benchmarked to a self consistent Schrodinger-Poisson solution for each bulk semiconductor material, and from the benchmarking process the QM correction parameters are extracted. The full program, C-V Alternative Channel Extraction (CV ACE), incorporates a quantum mechanical correction model, along with the interface state density model, and can extract device parameters such as equivalent oxide thickness (EOT), doping density and flat band voltage (Vfb) as well as the interface state density profile using multiple measurements performed at different frequencies and temperatures, simultaneously. The program was used to analyze experimentally measured C-V profiles and the

  1. Comparing maceral ratios from tropical peatlands with assumptions from coal studies. Do classic coal petrographic interpretation methods have to be discarded?

    Energy Technology Data Exchange (ETDEWEB)

    Wuest, Raphael A.J.; Hawke, Michelle I.; Marc Bustin, R. [Department of Earth and Ocean Sciences, Tropical Peat Research Group, University of British Columbia, 6339 Stores Road, V6T 1Z4 Vancouver, B.C. (Canada)

    2001-12-01

    Petrographic investigations of tropical peat deposits from the Tasek Bera Basin, Malaysia, show that petrographic methods can contribute valuable information about paleoecological settings of mire deposits. Comparing modern peat-forming environments and the pre-maceral composition of peat samples allows the reconstruction of paleoecological conditions, such as floral composition, fires, microbial activity, etc., and gives insight into paleodepositional environments. In the past, maceral ratios of coals have been used to interpret paleodepositional settings of coal deposits. Such a procedure assumes that coal texture and coal maceral composition are dictated solely by the depositional environment, and thus different depositional environments should be clearly discriminated based on maceral ratios. In the modern peat deposits of Tasek Bera, divergent petrographic results occur in similar depositional environments, hence, poor correlation occurs between the petrography, the degree of decomposition, and the depositional environment. Furthermore, from the time of peat deposition, peat is subject to considerable alteration. During subsequent diagenesis, preservation of structured and strongly altered material, such as inertinite, gelified material or funginite, is favoured and results in biased coal maceral compositions. Because maceral indexes in modern peat studies are of little utility in the reconstruction of paleoenvironmental settings, it follows that coal maceral indexes should not be utilized in the future to interpret paleodepositional environments of coals.

  2. Pressure Variations in Metamorphic Rocks: Implications for the Interpretation of Petrographic Observations

    Science.gov (United States)

    Tajčmanová, Lucie

    2014-05-01

    Metamorphic petrologists and structural geologists, using direct measurements, bring the only direct observational constrains for validating geodynamic models. Therefore, petrological and structural geological observations are essential for the quality and reproducibility of geodynamic reconstructions and models. One of the important assumptions for geodynamic reconstructions arises from the pressure and temperature estimates in the petrology analysis. Pressure is commonly converted to depth through the equation for lithostatic pressure and so the original position of the rock sample within the Earth's interior can be constrained. The current assumption that the studied sample corresponds to uniform pressure may not be correct, and if so, it has serious implications. Increasing evidence from analytical data shows that pressure is not constant even on a grain scale, posing new challenges because, if ignored, it leads to an incorrect use of petrology data in constraining geodynamic models. Well known examples of the preservation of coesite and diamond in a host mineral like garnet show that high pressure inclusions are preserved during decompression. Tajčmanová et al. (2014) has shown that grain-scale pressure variations can develop and that these pressure variations allow compositional zoning in minerals preserved over geological time scales. A new unconventional barometric method based on equilibrium under pressure variations has been developed . Such pressure variations are also connected with differences in fluid pressure in open systems and can be thus observed at all scales. Tajčmanová L., Podladchikov Y., Powell R., Moulas E., Vrijmoed J. and Connolly J. (2014). Grain scale pressure variations and chemical equilibrium in high-grade metamorphic rocks.Journal of Metamorphic Geology, doi:10.1111/jmg.12066 This work was supported by ERC starting grant 335577 to Lucie Tajcmanova

  3. The importance of thermal behaviour and petrographic composition for understanding the characteristics of a Portuguese perhydrous Jurassic coal

    Energy Technology Data Exchange (ETDEWEB)

    Costa, A. [Centro de Geologia, Universidade do Porto (Portugal); Flores, D. [Centro de Geologia, Universidade do Porto (Portugal); Departamento de Geociencias, Ambiente e Ordenamento do Territorio, Faculdade de Ciencias, Universidade do Porto (Portugal); Suarez-Ruiz, I.; Pevida, C.; Rubiera, F. [Instituto Nacional del Carbon, (INCAR-CSIC), Oviedo (Spain); Iglesias, M.J. [Area de Quimica Organica, Universidad de Almeria (Spain)

    2010-12-01

    The perhydrous Batalha coal (Portugal) is found in the Cabacos and Montejunto Formation of the Oxfordian-Kimeridgian, Upper Jurassic age. From the macroscopic point of view, its appearance is similar to other perhydrous coals. Microscopically, the maceral group of huminite is the main organic component (96%), ulminite being the most important petrographic component, followed by textinite with resinite (4%) lumina filled. The huminite random reflectance is 0.33%. This coal is characterized by high H/C atomic ratio, and anomalous physical and chemical properties that are characteristic of perhydrous coals such as: (i) the absence of any correlation between reflectance and the chemical rank parameters; (ii) a lower real density than that of non-perhydrous coals; (iii) a high hydrogen content; and (iv) suppressed reflectance. Using its calorific value (moist, ash-free basis) as rank parameter, Batalha coal must be considered a subbituminous A coal. Hydrogen enrichment due to the presence of resinite has influenced the technological properties of this coal, namely: (i) reduction of the thermostability and decrease in the temperature of initial thermal decomposition due to, among other reasons, the existence of aliphatic structures with low dissociation energy bonds resulting from the presence of resinite; (ii) from the DTG profile, the volatile matter combustion and char combustion is not evident; (iii) development of chars made up of isotropic particles with angular edges, which is typical of a low rank coal; (iv) the evolution trend of gaseous compounds (CO, CO{sub 2} and CH{sub 4}) during pyrolysis; and, (v) an increase in its calorific value due to its hydrogen content. The study of this coal which is interbedded in Jurassic formations in the Lusitanian Basin of Portugal is a new contribution to the assessment of the evolution of organic matter in this area. (author)

  4. The Alto Paraguay Alkaline Province: petrographic, geochemical and geochronological characteristics; Provincia alcalina Alto Paraguai: caracteristicas petrograficas, geoquimicas e geocronologicas

    Energy Technology Data Exchange (ETDEWEB)

    Velazquez Fernandez, Victor

    1996-12-31

    The Alto Paraguay Province is located at the border of the State of Mato Grosso do Sul and Paraguay, between the coordinates 21 deg 10{sup `}to 23 deg 25{sup `}of Southern latitude and 57 deg 10{sup `} to 58 deg 00{sup `}, having the city of Porto Murtinho as the main reference point. The geotectonic domain of the area is governed by the precambric units of the Southern extreme of the Amazonic craton which developed a long and accentuated activity, giving rise to folds and important faults, that in several cases seem to have exerted an effective control of the magmatic manifestations. Radiometric data indicate that the emplacement of the syenitic bodies took place in the Permo-Triassic period, with a major incidence in the interval 260-240 Ma, representing thus, an important phase of alkaline magmatic affinity associated to the Parana Basin which is believed is to be unique, since the other known areas (Central, Amambay and Rio Apa Provinces, Paraguay, Velasco Province, Bolivia) are considerably younger (140-120 Ma). Syenitic rocks from the Alto Paraguay Province show wide variation in the ratio {sup 87} Sr/{sup 86} Sr (0.703361 - 0.707734). Excluding the Cerro Boggiani rocks (0.703837-0.707734), values for the nepheline syenites (0.703361-0.703672) general lower than those of the other syenites types. Alkaline syenites cover the interval 0.703510- 0.703872, while quartz syenites and syenogranites are 0.704562 and 0.707076, respectively. geologic evidence, in addition to petrographic, geochemical and isotopic (Sr) data, suggest that the syenitic rocks have been derived from an unique mantelic parental liquid, by fractional crystallization and assimilation processes, which are assumed to be occurred during the emplacement of the magma in the crust. (author) 124 refs., 52 figs., 7 tabs.

  5. Characterisation of lignite lithotypes from the “Kovin” deposit (Serbia - implications from petrographic, biomarker and isotopic analysis

    Directory of Open Access Journals (Sweden)

    Mitrović Danica

    2017-01-01

    Full Text Available Four lignite lithotypes (matrix coal, xylite-rich coal, mixture of matrix and mineral-rich coal and mixture of matrix and xylite-rich coal, originating from the Kovin deposit, were investigated in detail. The paper was aimed to determine the main maceral, biomarker and isotopic (δ13C characteristics of investigated lithotypes. Based on these results the sources and depositional environment of organic matter in 4 lithotypes were established. These samples were also used as substrates for investigation of the influence of diagenetic alteration on δ13C signatures of biomarkers, as well as for assessment of the most convenient utilization for each lithotype. The investigated lithotypes differ in accordance with the composition of huminite macerals. Xylite-rich coal notably distinguishes from other lithotypes beacuse of the highest content of conifer resins vs. epicuticular waxes. The mixture of matrix and mineral-rich coal is characterised by the greatest contribution of algae and fungi and the most intense methanotrophic activity at the time of deposition. In all coal lithotypes diagenetic aromatisation influenced isotopic composition of individual biomarkers. Xylite-rich coal has the poorest grindability properties. However, this coal lithotype is the most suitable for fluidized bed gasification, whereas the mixture of matrix and mineral-rich coal has the lowest applicability for this process. The calorific value decreases in order: xylite-rich coal > matrix coal > mixture of matrix and xylite-rich coal > mixture of matrix and mineral-rich coal. The increase of organic carbon content and calorific value is controlled by the increase of contribution of wood vegetation vs. herbaceous peat-forming plants, as well as by stability of water table during peatification. [Project of the Ministry of Education, Science and Technological Development of the Republic of Serbia, Grant no. 176006 and Grant no. 451-03-01039/2015-09/05

  6. 3-D investigation of rock fabrics by deformation measurement, ultrasonic sounding, neutron difraqction and petrographic image analysis

    Czech Academy of Sciences Publication Activity Database

    Lokajíček, Tomáš; Přikryl, R.; Pros, Zdeněk; Klíma, Karel

    -, č. 13 (2005), s. 45-50 ISSN 1214-9691 R&D Projects: GA ČR(CZ) GA205/01/1430; GA ČR(CZ) GA205/04/0088 Institutional research plan: CEZ:AV0Z30460519 Keywords : elastic anisotropy * high confining stress * neutron diffraction Subject RIV: DB - Geology ; Mineralogy

  7. Technical support document: Energy conservation standards for consumer products: Dishwashers, clothes washers, and clothes dryers including: Environmental impacts; regulatory impact analysis

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    The Energy Policy and Conservation Act as amended (P.L. 94-163), establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. This Technical Support Document presents the methodology, data and results from the analysis of the energy and economic impacts of standards on dishwashers, clothes washers, and clothes dryers. The economic impact analysis is performed in five major areas: An Engineering Analysis, which establishes technical feasibility and product attributes including costs of design options to improve appliance efficiency. A Consumer Analysis at two levels: national aggregate impacts, and impacts on individuals. The national aggregate impacts include forecasts of appliance sales, efficiencies, energy use, and consumer expenditures. The individual impacts are analyzed by Life-Cycle Cost (LCC), Payback Periods, and Cost of Conserved Energy (CCE), which evaluate the savings in operating expenses relative to increases in purchase price; A Manufacturer Analysis, which provides an estimate of manufacturers' response to the proposed standards. Their response is quantified by changes in several measures of financial performance for a firm. An Industry Impact Analysis shows financial and competitive impacts on the appliance industry. A Utility Analysis that measures the impacts of the altered energy-consumption patterns on electric utilities. A Environmental Effects analysis, which estimates changes in emissions of carbon dioxide, sulfur oxides, and nitrogen oxides, due to reduced energy consumption in the home and at the power plant. A Regulatory Impact Analysis collects the results of all the analyses into the net benefits and costs from a national perspective. 47 figs., 171 tabs. (JF)

  8. CASKS (Computer Analysis of Storage casKS): A microcomputer based analysis system for storage cask design review. User's manual to Version 1b (including program reference)

    International Nuclear Information System (INIS)

    Chen, T.F.; Gerhard, M.A.; Trummer, D.J.; Johnson, G.L.; Mok, G.C.

    1995-02-01

    CASKS (Computer Analysis of Storage casKS) is a microcomputer-based system of computer programs and databases developed at the Lawrence Livermore National Laboratory (LLNL) for evaluating safety analysis reports on spent-fuel storage casks. The bulk of the complete program and this user's manual are based upon the SCANS (Shipping Cask ANalysis System) program previously developed at LLNL. A number of enhancements and improvements were added to the original SCANS program to meet requirements unique to storage casks. CASKS is an easy-to-use system that calculates global response of storage casks to impact loads, pressure loads and thermal conditions. This provides reviewers with a tool for an independent check on analyses submitted by licensees. CASKS is based on microcomputers compatible with the IBM-PC family of computers. The system is composed of a series of menus, input programs, cask analysis programs, and output display programs. All data is entered through fill-in-the-blank input screens that contain descriptive data requests

  9. 5-HTTLPR and use of antidepressants after colorectal cancer including a meta-analysis of 5-HTTLPR and depression after cancer

    DEFF Research Database (Denmark)

    Suppli, N P; Bukh, J D; Moffitt, T E

    2015-01-01

    that risk for use of antidepressants following a diagnosis of colorectal cancer is associated with bi- and triallelic genotypes of 5-HTTLPR. In addition, in an inclusive meta-analysis, we tested the hypothesis that depression following a diagnosis of cancer is associated with biallelic 5-HTTLPR genotype. We......-analysis. Nationwide registries provided information on dates of diagnosis of colorectal cancer and use of antidepressants. Unadjusted odds ratios of depression according to the biallelic 5-HTTLPR genotype were included in the meta-analysis. 5-HTTLPR genotypes were not associated with use of antidepressants after...... with depression after cancer. Our findings in an original study and a meta-analysis do not support the hypothesis of an association between the 5-HTTLPR genotype and depression after cancer....

  10. Petrographic and anatomical characteristics of plant material from two peat deposits of Holocene and Miocene age, Kalimantan, Indonesia

    Science.gov (United States)

    Moore, T.A.; Hilbert, R.E.

    1992-01-01

    Samples from two peat-forming environments of Holocene and Miocene age in Kalimantan (Borneo), Indonesia, were studied petrographically using nearly identical sample preparation and microscopic methodologies. Both deposits consist of two basic types of organic material: plant organs/tissues and fine-grained matrix. There are seven predominant types of plant organs and tissues: roots possessing only primary growth, stems possessing only primary growth, leaves, stems/roots with secondary growth, secondary xylem fragments, fragments of cork cells, and macerated tissue of undetermined origin. The fine-grained matrix consists of fragments of cell walls and cell fillings, fungal remains, spores and pollen grains, and resin. Some of the matrix material does not have distinct grain boundaries (at ??500) and this material is designated amorphous matrix. The major difference between the Holocene peat and Miocene lignite in reflected light, oil immersion is a loss of red coloration in the cell walls of tissue in the lignite, presumably due to loss of cellulosic compounds. In addition, cortex and phloem tissue (hence primary roots and stems) are difficult to recognize in the lignite, probably because these large, thin-walled tissues are more susceptible to microbial degradation and compaction. Particle size in both peat and lignite samples display a bimodal distribution when measurements are transformed to a - log2 or phi (??), scale. Most plant parts have modes of 2-3?? (0.25 - 0.125 mm), whereas the finer-grained particulate matrix has modes of 7-9?? (0.008-0.002 mm). This similarity suggest certain degradative processes. The 2-3?? range may be a "stable" size for plant parts (regardless of origin) because this is a characteristics of a substrate which is most suitable for plant growth in peat. The finer-grained matrix material (7-9??) probably results from fungal decay which causes plant material to weaken and with slight physical pressure to shatter into its component

  11. Assessment of aggregate quality and petrographic properties' influence on rock quality: A case study from Nordland county, Norway

    Science.gov (United States)

    Kløve Keiding, Jakob; Erichsen, Eyolf; Heldal, Tom; Aslaksen Aasly, Kari

    2017-04-01

    variable degrees of deformation in the different tectonostratigraphic units exposed in Nordland affects the rock mechanical properties and is a prominent feature of our mapping. Unsurprisingly rock type, mineralogy, grain size and rock texture are all important factors that have a major control on the mechanical behaviour of the rocks. However, this assessment shows that there is an intricate interaction between these parameters and the resulting mechanical properties at present making it difficult to assess mechanical quality accurately only based on petrographic examination.

  12. Applications of petrography and electron microprobe analysis to the study of Indian stone sculpture

    International Nuclear Information System (INIS)

    Newman, R.

    1992-01-01

    Examples of research on ancient Indian stone artefacts utilizing petrographic examination coupled with qualitative and quantitative electron beam microprobe analysis of specific minerals are described. Types of artefacts discussed include Gandharan schist sculptures, Pala dynasty phyllite and schist objects from eastern India. Hoysala sculptures from Karnataka state (southern India), and sandstone objects from northern India. In spite of the rich history of stone sculpture in the Indian subcontinent, characterization studies to date have been limited in scope, typically involving unprovenanced artefacts. The examples described point to areas in which more extensive research could produce useful information for the provenancing of artefacts. (author)

  13. Influence of petrographic textures on the shapes of impact experiment fine fragments measuring several tens of microns: Comparison with Itokawa regolith particles

    Science.gov (United States)

    Michikami, Tatsuhiro; Kadokawa, Tokiyuki; Tsuchiyama, Akira; Hagermann, Axel; Nakano, Tsukasa; Uesugi, Kentaro; Hasegawa, Sunao

    2018-03-01

    In 2010, fine regolith particles on asteroid Itokawa were recovered by the Hayabusa mission. The three-dimensional microstructure of 48 Itokawa particles smaller than 120 μm was examined in previous studies. The shape distribution of Itokawa particles is distributed around the mean values of the axial ratio 2:√2:1, which is similar to laboratory impact fragments larger than several mm created in catastrophic disruptions. Thus, the Itokawa particles are considered to be impact fragments on the asteroid's surface. However, there have never been any laboratory impact experiments investigating the shapes of fine fragments smaller than 120 μm, and little is known about the relation between the shapes of fine fragments and the petrographic textures within those fragments. In this study, in order to investigate the relation between the petrographic textures and the shapes of fine fragments by impacts, the shapes of 2163 fine fragments smaller than 120 μm are examined by synchrotron radiation-based microtomography at SPring-8. Most samples are fine fragments from basalt targets, obtained in previous laboratory impact experiments by Michikami et al. (2016). Moreover, two impacts into L5 chondrite targets were carried out and the shapes of their fine fragments are examined for comparison. The results show that the shape distributions of fine fragments in basalt targets are similar regardless of impact energy per target mass (in contract to the shape distribution of relatively large fragments, which are affected by impact energy), and are similar to those in L5 chondrite targets and Itokawa regolith particles. The physical process producing these fine fragments would be due to multiple rarefaction waves in the target. Besides, the petrographic textures do not significantly affect the shapes of fine fragments in our experiments. On the other hand, according to Molaro et al. (2015), the shapes of the fragments produced by thermal fatigue by the day-night temperature cycles

  14. Use of computational fluid dynamics codes for safety analysis of nuclear reactor systems, including containment. Summary report of a technical meeting

    International Nuclear Information System (INIS)

    2003-11-01

    Safety analysis is an important tool for justifying the safety of nuclear power plants. Typically, this type of analysis is performed by means of system computer codes with one dimensional approximation for modelling real plant systems. However, in the nuclear area there are issues for which traditional treatment using one dimensional system codes is considered inadequate for modelling local flow and heat transfer phenomena. There is therefore increasing interest in the application of three dimensional computational fluid dynamics (CFD) codes as a supplement to or in combination with system codes. There are a number of both commercial (general purpose) CFD codes as well as special codes for nuclear safety applications available. With further progress in safety analysis techniques, the increasing use of CFD codes for nuclear applications is expected. At present, the main objective with respect to CFD codes is generally to improve confidence in the available analysis tools and to achieve a more reliable approach to safety relevant issues. An exchange of views and experience can facilitate and speed up progress in the implementation of this objective. Both the International Atomic Energy Agency (IAEA) and the Nuclear Energy Agency of the Organisation for Economic Co-operation and Development (OECD/NEA) believed that it would be advantageous to provide a forum for such an exchange. Therefore, within the framework of the Working Group on the Analysis and Management of Accidents of the NEA's Committee on the Safety of Nuclear Installations, the IAEA and the NEA agreed to jointly organize the Technical Meeting on the Use of Computational Fluid Dynamics Codes for Safety Analysis of Reactor Systems, including Containment. The meeting was held in Pisa, Italy, from 11 to 14 November 2002. The publication constitutes the report of the Technical Meeting. It includes short summaries of the presentations that were made and of the discussions as well as conclusions and

  15. A combined multibody and finite element approach for dynamic interaction analysis of high-speed train and railway structure including post-derailment behavior during an earthquake

    Science.gov (United States)

    Tanabe, M.; Wakui, H.; Sogabe, M.; Matsumoto, N.; Tanabe, Y.

    2010-06-01

    A combined multibody and finite element approach is given to solve the dynamic interaction of a Shinkansen train (high-speed train in Japan) and the railway structure including post-derailment during an earthquake effectively. The motion of the train is expressed in multibody dynamics. Efficient mechanical models to express interactions between wheel and track structure including post-derailment are given. Rail and track elements expressed in multibody dynamics and FEM are given to solve contact problems between wheel and long railway components effectively. The motion of a railway structure is modeled with various finite elements and rail and track elements. The computer program has been developed for the dynamic interaction analysis of a Shinkansen train and railway structure including post derailment during an earthquake. Numerical examples are demonstrated.

  16. Preparation and certification of the Polish reference material Virginia Tobacco Leaves (CTA-VTL-2) for inorganic trace analysis including microanalysis

    International Nuclear Information System (INIS)

    Dybczynski, R.; Polkowska-Motrenko, H.; Samczynski, Z.; Szopa, Z.

    1997-01-01

    A new Polish certified reference material Virginia Tobacco Leaves (CTA-VTL-2) for inorganic trace analysis including microanalysis has been prepared. Certification of the candidate reference material was based on the world-wide interlaboratory comparison in which 60 laboratories from 18 countries, participated using various analytical methods and techniques. Data evaluation performed by means of the new multifunctional software package -SSQC. Recommended values were assigned for 33 and 'information' values for 10 elements, respectively. The validity of 'certified' values was confirmed for several elements using 'very accurate' methods developed in this Laboratory. (author)

  17. Preparation and certification of the Polish reference material Virginia Tobacco Leaves (CTA-VTL-2) for inorganic trace analysis including microanalysis

    Energy Technology Data Exchange (ETDEWEB)

    Dybczynski, R.; Polkowska-Motrenko, H.; Samczynski, Z.; Szopa, Z.

    1997-12-31

    A new Polish certified reference material Virginia Tobacco Leaves (CTA-VTL-2) for inorganic trace analysis including microanalysis has been prepared. Certification of the candidate reference material was based on the world-wide interlaboratory comparison in which 60 laboratories from 18 countries, participated using various analytical methods and techniques. Data evaluation performed by means of the new multifunctional software package -SSQC. Recommended values were assigned for 33 and `information` values for 10 elements, respectively. The validity of `certified` values was confirmed for several elements using `very accurate` methods developed in this Laboratory. (author). 47 refs, 28 figs, 12 tabs.

  18. Predictive value of diffusion-weighted imaging without and with including contrast-enhanced magnetic resonance imaging in image analysis of head and neck squamous cell carcinoma

    Energy Technology Data Exchange (ETDEWEB)

    Noij, Daniel P., E-mail: d.noij@vumc.nl [Department of Radiology and Nuclear Medicine, VU University Medical Center, De Boelelaan 1117, Amsterdam, Noord-Holland (Netherlands); Pouwels, Petra J.W., E-mail: pjw.pouwels@vumc.nl [Department of Physics and Medical Technology, VU University Medical Center, De Boelelaan 1117, Amsterdam, Noord-Holland (Netherlands); Ljumanovic, Redina, E-mail: rljumanovic@adventh.org [Department of Radiology and Nuclear Medicine, VU University Medical Center, De Boelelaan 1117, Amsterdam, Noord-Holland (Netherlands); Knol, Dirk L., E-mail: dirklknol@gmail.com [Department of Epidemiology and Biostatistics, VU University Medical Center, De Boelelaan 1117, Amsterdam, Noord-Holland (Netherlands); Doornaert, Patricia, E-mail: p.doornaert@vumc.nl [Department of Radiation Oncology, VU University Medical Center, De Boelelaan 1117, Amsterdam, Noord-Holland (Netherlands); Bree, Remco de, E-mail: r.debree@vumc.nl [Department of Otolaryngology – Head and Neck Surgery, VU University Medical Center, De Boelelaan 1117, Amsterdam, Noord-Holland (Netherlands); Castelijns, Jonas A., E-mail: j.castelijns@vumc.nl [Department of Radiology and Nuclear Medicine, VU University Medical Center, De Boelelaan 1117, Amsterdam, Noord-Holland (Netherlands); Graaf, Pim de, E-mail: p.degraaf@vumc.nl [Department of Radiology and Nuclear Medicine, VU University Medical Center, De Boelelaan 1117, Amsterdam, Noord-Holland (Netherlands)

    2015-01-15

    Highlights: • Primary tumor volume and lymph node ADC1000 are predictors of survival. • CE-T1WI does not improve the prognostic capacity of DWI. • Using CE-T1WI for ROI placement results in lower interobserver agreement. - Abstract: Objectives: To assess disease-free survival (DFS) in head and neck squamous cell carcinoma (HNSCC) treated with (chemo)radiotherapy ([C]RT). Methods: Pretreatment MR-images of 78 patients were retrospectively studied. Apparent diffusion coefficients (ADC) were calculated with two sets of two b-values: 0–750 s/mm{sup 2} (ADC{sub 750}) and 0–1000 s/mm{sup 2} (ADC{sub 1000}). One observer assessed tumor volume on T1-WI. Two independent observers assessed ADC-values of primary tumor and largest lymph node in two sessions (i.e. without and with including CE-T1WI in image analysis). Interobserver and intersession agreement were assessed with intraclass correlation coefficients (ICC) separately for ADC{sub 750} and ADC{sub 1000}. Lesion volumes and ADC-values were related to DFS using Cox regression analysis. Results: Median follow-up was 18 months. Interobserver ICC was better without than with CE-T1WI (primary tumor: 0.92 and 0.75–0.83, respectively; lymph node: 0.81–0.83 and 0.61–0.64, respectively). Intersession ICC ranged from 0.84 to 0.89. With CE-T1WI, mean ADC-values of primary tumor and lymph node were higher at both b-values than without CE-T1WI (P < 0.001). Tumor volume (sensitivity: 73%; specificity: 57%) and lymph node ADC{sub 1000} (sensitivity: 71–79%; specificity: 77–79%) were independent significant predictors of DFS without and with including CE-T1WI (P < 0.05). Conclusions: Pretreatment primary tumor volume and lymph node ADC{sub 1000} were significant independent predictors of DFS in HNSCC treated with (C)RT. DFS could be predicted from ADC-values acquired without and with including CE-T1WI in image analysis. The inclusion of CE-T1WI did not result in significant improvements in the predictive value of

  19. Comprehensive processing of high-throughput small RNA sequencing data including quality checking, normalization, and differential expression analysis using the UEA sRNA Workbench.

    Science.gov (United States)

    Beckers, Matthew; Mohorianu, Irina; Stocks, Matthew; Applegate, Christopher; Dalmay, Tamas; Moulton, Vincent

    2017-06-01

    Recently, high-throughput sequencing (HTS) has revealed compelling details about the small RNA (sRNA) population in eukaryotes. These 20 to 25 nt noncoding RNAs can influence gene expression by acting as guides for the sequence-specific regulatory mechanism known as RNA silencing. The increase in sequencing depth and number of samples per project enables a better understanding of the role sRNAs play by facilitating the study of expression patterns. However, the intricacy of the biological hypotheses coupled with a lack of appropriate tools often leads to inadequate mining of the available data and thus, an incomplete description of the biological mechanisms involved. To enable a comprehensive study of differential expression in sRNA data sets, we present a new interactive pipeline that guides researchers through the various stages of data preprocessing and analysis. This includes various tools, some of which we specifically developed for sRNA analysis, for quality checking and normalization of sRNA samples as well as tools for the detection of differentially expressed sRNAs and identification of the resulting expression patterns. The pipeline is available within the UEA sRNA Workbench, a user-friendly software package for the processing of sRNA data sets. We demonstrate the use of the pipeline on a H. sapiens data set; additional examples on a B. terrestris data set and on an A. thaliana data set are described in the Supplemental Information A comparison with existing approaches is also included, which exemplifies some of the issues that need to be addressed for sRNA analysis and how the new pipeline may be used to do this. © 2017 Beckers et al.; Published by Cold Spring Harbor Laboratory Press for the RNA Society.

  20. Birth weight and long-term overweight risk: systematic review and a meta-analysis including 643,902 persons from 66 studies and 26 countries globally.

    Directory of Open Access Journals (Sweden)

    Karen Schellong

    Full Text Available Overweight is among the major challenging health risk factors. It has been claimed that birth weight, being a critical indicator of prenatal developmental conditions, is related to long-term overweight risk. In order to check this important assumption of developmental and preventive medicine, we performed a systematic review and comprehensive meta-analysis.Relevant studies published up to January 2011 that investigated the relation between birth weight and later risk of overweight were identified through literature searches using MEDLINE and EMBASE. For meta-analysis, 66 studies from 26 countries and five continents were identified to be eligible, including 643,902 persons aged 1 to 75 years. We constructed random-effects and fixed-effects models, performed subgroup-analyses, influence-analyses, assessed heterogeneity and publication bias, performed meta-regression analysis as well as analysis of confounder adjusted data. Meta-regression revealed a linear positive relationship between birth weight and later overweight risk (p4,000 g was associated with increased risk of overweight (OR=1.66; 95% CI 1.55-1.77. Results did not change significantly by using normal birth weight (2,500-4,000 g as reference category (OR=0.73, 95% CI 0.63-0.84, and OR=1.60, 95% CI 1.45-1.77, respectively. Subgroup- and influence-analyses revealed no indication for bias/confounding. Adjusted estimates indicate a doubling of long-term overweight risk in high as compared to normal birth weight subjects (OR=1.96, 95% CI 1.43-2.67.Findings demonstrate that low birth weight is followed by a decreased long-term risk of overweight, while high birth weight predisposes for later overweight. Preventing in-utero overnutrition, e.g., by avoiding maternal overnutrition, overweight and/or diabetes during pregnancy, might therefore be a promising strategy of genuine overweight prevention, globally.

  1. Prognostic role of neutrophil to lymphocyte ratio in lung cancers: a meta-analysis including 7,054 patients

    Directory of Open Access Journals (Sweden)

    Zhao QT

    2015-09-01

    Full Text Available Qing-Tao Zhao,1 Yong Yang,2 Shun Xu,3 Xiao-Peng Zhang,1 Hui-En Wang,1 Hua Zhang,1 Zhi-Kang Wang,1 Zheng Yuan,1 Guo-Chen Duan11Department of Thoracic Surgery, Hebei General Hospital, Shijiazhuang, Hebei, 2Department of General Surgery, Sujiatun Central Hospital, 3Department of Thoracic Surgery, The First Affiliated Hospital, China Medical University, Shenyang, Liaoning, People’s Republic of ChinaBackground: Neutrophil to lymphocyte ratio (NLR has recently been reported to be a poor prognostic indicator in lung cancer. However, the prognostic value of the NLR in patients with lung cancer still remains controversial. We performed a meta-analysis to evaluate the prognostic value of NLR in patients with lung cancer.Methods: We performed a comprehensive literature search in PubMed, Ovid, the Cochrane Library, and Web of Science databases in May 2015. Studies were assessed for quality using the Newcastle–Ottawa Scale.Results: Twenty-two studies with a total of 7,054 patients were included in this meta-analysis. The meta-analysis was performed to generate combined hazard ratios (HRs for overall survival (OS and progression-free survival (PFS. Our analysis results indicated that high NLR predicted poorer OS (HR, 1.51; 95% confidence interval [CI], 1.33–1.71; P<0.001 and PFS (HR, 1.33; 95% CI, 1.07–1.67; P=0.012 in patients with lung cancer. High NLR was also associated with poor OS in lung cancer treated by surgical resection (HR, 1.59; 95% CI, 1.26–1.99; P<0.001 and chemotherapy (HR, 1.15; 95% CI, 1.08–1.22; P<0.001. In addition, NLR cut-off value =5 (HR, 1.57; 95% CI, 1.16–2.12; P=0.003 and NLR cut-off value <5 (HR, 1.47; 95% CI, 1.28–1.69; P<0.001.Conclusion: This meta-analysis result suggested that NLR should have significant predictive ability for estimating OS and PFS in patients with lung cancer and may be as a significant biomarker in the prognosis of lung cancer.Keywords: NLR, lung cancer, prognosis, meta-analysis

  2. Methodology in the Assessment of Construction and Development Investment Projects, Including the Graphic Multi-Criteria Analysis – a Systemic Approach

    Science.gov (United States)

    Szafranko, Elżbieta

    2017-10-01

    Assessment of variant solutions developed for a building investment project needs to be made at the stage of planning. While considering alternative solutions, the investor defines various criteria, but a direct evaluation of the degree of their fulfilment by developed variant solutions can be very difficult. In practice, there are different methods which enable the user to include a large number of parameters into an analysis, but their implementation can be challenging. Some methods require advanced mathematical computations, preceded by complicating input data processing, and the generated results may not lend themselves easily to interpretation. Hence, during her research, the author has developed a systemic approach, which involves several methods and whose goal is to compare their outcome. The final stage of the proposed method consists of graphic interpretation of results. The method has been tested on a variety of building and development projects.

  3. An Exploratory Analysis of Child Feeding Beliefs and Behaviors Included in Food Blogs Written by Mothers of Preschool-Aged Children.

    Science.gov (United States)

    Doub, Allison E; Small, Meg; Birch, Leann

    2016-02-01

    This study analyzed child feeding beliefs and behaviors, types of recipes, and their associations in blogs focused on child feeding. The authors selected 13 blogs using purposive snowball sampling, from which 158 blog posts were sampled and coded using directed qualitative content analysis. Child feeding beliefs and behaviors and types of recipes were coded using schemes developed from existing literature. Code frequencies were calculated. Chi-square tests for independence examined associations between child feeding and recipe codes. Bonferroni corrections were applied: P feeding beliefs and behaviors were coded in 78% and 49% of posts, respectively. Beliefs about children's food preferences (48% of posts) and involving children in food preparation (27% of posts) were the most frequent codes. Recipes were included in 66% of posts. Most recipes were for mixed dishes (32% of recipes), followed by sweets and desserts (19% of recipes). Vegetable recipes were more likely in posts that included behavior encouraging balance and variety (χ2 [1, n = 104] = 18.54; P feeding practices. Future research should explore how mothers use blogs to learn about child feeding. Copyright © 2016 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

  4. Prevalence study and risk factor analysis of selected bacterial, protozoal and viral, including vector-borne, pathogens in cats from Cyprus.

    Science.gov (United States)

    Attipa, Charalampos; Papasouliotis, Kostas; Solano-Gallego, Laia; Baneth, Gad; Nachum-Biala, Yaarit; Sarvani, Elpida; Knowles, Toby G; Mengi, Sena; Morris, David; Helps, Chris; Tasker, Séverine

    2017-03-13

    Feline infectious agent studies are lacking in Cyprus. The aims of this study were to determine the prevalence and risk factors for various feline infectious agents, including feline vector-borne pathogens (FVBP), in cats from Cyprus. A cross-sectional, descriptive, multicentre study was performed on 174 feline samples [138 owned and 36 shelter-feral, including both healthy (43) and non-healthy (131), cats] from private veterinary clinics from all six districts of Cyprus. Real-time quantitative polymerase chain reaction (qPCR) assays were used to detect Mycoplasma haemofelis (Mhf), "Candidatus Mycoplasma haemominutum" (CMhm) and "Candidatus Mycoplasma turicensis" (CMt). The population was tested for four FVBP including Bartonella henselae and Leishmania spp. using qPCR, while conventional PCR assays were used to detect Ehrlichia/Anaplasma spp. and Hepatozoon spp. Serological assays were performed to detect Leishmania infantum antibodies, feline leukaemia virus (FeLV) antigen and feline immunodeficiency virus (FIV) antibodies. Statistical analysis was performed to test associations and possible risk factors between variables and infectious agents. Ninety-six (55.2%) of the 174 cats were PCR-positive for at least one infectious agent. Forty-six cats (26.4%) were haemoplasma positive, including 13 (7.5%) for Mhf, 36 (20.7%) for CMhm and 12 (6.9%) for CMt. Sixty-six cats (37.9%) were positive for Hepatozoon spp., while 19 (10.9%) were positive for B. henselae, four (2.3%) for Leishmania spp. and one (0.6%) for Ehrlichia/Anaplasma spp. Sequencing revealed the presence of Hepatozoon felis, L. infantum and Anaplasma platys. Of the 164 cats that underwent retroviral serology, 10 (6.1%) were FeLV-positive and 31 (18.9%) were FIV-positive, while L. infantum serology was positive in 7 (4.4%) of the 160 cats tested. Multivariable logistic regression revealed significant associations for various infectious agents including L. infantum with each of Hepatozoon spp. and CMt

  5. Birth Weight and Long-Term Overweight Risk: Systematic Review and a Meta-Analysis Including 643,902 Persons from 66 Studies and 26 Countries Globally

    Science.gov (United States)

    Harder, Thomas; Plagemann, Andreas

    2012-01-01

    Background Overweight is among the major challenging health risk factors. It has been claimed that birth weight, being a critical indicator of prenatal developmental conditions, is related to long-term overweight risk. In order to check this important assumption of developmental and preventive medicine, we performed a systematic review and comprehensive meta-analysis. Methods and Findings Relevant studies published up to January 2011 that investigated the relation between birth weight and later risk of overweight were identified through literature searches using MEDLINE and EMBASE. For meta-analysis, 66 studies from 26 countries and five continents were identified to be eligible, including 643,902 persons aged 1 to 75 years. We constructed random-effects and fixed-effects models, performed subgroup-analyses, influence-analyses, assessed heterogeneity and publication bias, performed meta-regression analysis as well as analysis of confounder adjusted data. Meta-regression revealed a linear positive relationship between birth weight and later overweight risk (poverweight (odds ratio (OR) = 0.67; 95% confidence interval (CI) 0.59–0.76). High birth weight (>4,000 g) was associated with increased risk of overweight (OR = 1.66; 95% CI 1.55–1.77). Results did not change significantly by using normal birth weight (2,500–4,000 g) as reference category (OR = 0.73, 95% CI 0.63–0.84, and OR = 1.60, 95% CI 1.45–1.77, respectively). Subgroup- and influence-analyses revealed no indication for bias/confounding. Adjusted estimates indicate a doubling of long-term overweight risk in high as compared to normal birth weight subjects (OR = 1.96, 95% CI 1.43–2.67). Conclusions Findings demonstrate that low birth weight is followed by a decreased long-term risk of overweight, while high birth weight predisposes for later overweight. Preventing in-utero overnutrition, e.g., by avoiding maternal overnutrition, overweight and/or diabetes during pregnancy

  6. Evidence of Metasomatism in the Lowest Petrographic Types Inferred from A Na(-), K, Rich Rim Around A LEW 86018 (L3.1) Chondrule

    Science.gov (United States)

    Mishra, Ritesh Kumar; Marhas, Kuljeet Kaur; Simon, Justin I.; Ross, Daniel Kent

    2015-01-01

    Ordinary chondrites (OCs) represent the most abundant extraterrestrial materials and also record the widest range of alteration of primary, pristine minerals of early Solar system material available for study. Relatively few investigations, however, address: (1) the role of fluid alteration, and (2) the relationship between thermal metamorphism and metasomatism in OCs, issues that have been extensively studied in many other meteorite groups e.g., CV, CO, CR, and enstatite chondrites. Detailed elemental abundances profiles across individual chondrules, and mineralogical studies of Lewis Hills (LEW) 86018 (L3.1), an unequilibrated ordinary chondrite (UOC) of low petrographic type of 3.1 returned from Antarctica, provide evidence of extensive alteration of primary minerals. Some chondrules have Na(-), K(-), rich rims surrounded by nepheline, albite, and sodalite-like Na(-), Cl(-), Al-rich secondary minerals in the near vicinity within the matrices. Although, limited evidences of low temperature (approximately 250 C) fluid-assisted alteration of primary minerals to phyllosilicates, ferroanolivine, magnetite, and scapolite have been reported in the lowest grades (less than 3.2) Semarkona (LL3.00) and Bishunpur (LL3.10), alkali-rich secondary mineralization has previously only been seen in higher grade greater than 3.4 UOCs. This preliminary result suggests highly localized metamorphism in UOCs and widens the range of alteration in UOCs and complicates classification of petrographic type and extent of thermal metamorphism or metasomatism. The work in progress will document the micro-textures, geochemistry (Ba, Ca, REE), and isotopic composition (oxygen, Al(-)- 26 Mg-26) of mineral phases in chondrules and adjoining objects to help us understand the formation scenario and delineate possible modes of metamorphism in UOCs.

  7. Petrographic study of hypo-thermal and pyro-metasomatic deposits on the oriental border of Tichka mountain (Occidental High Atlas, Morocco)

    International Nuclear Information System (INIS)

    Bizard, C.; Ziegler, V.

    1956-01-01

    It describes the petrographic and metallogenic study of the oriental side of Tichka mountain (Occidental High Atlas, Morocco) which is the center of an anticlinal system, strongly folded, and approximately SW-NE oriented. The main object of this study is the description of its metallogenic activity and in particular the large variety of paragenesis which have been observed in the oriental part of Tichka mountain where the metamorphism is intense. This area presents a large abundance and diversity of deposits. The structural aspect of the oriental part of the Tichka mountain is described. The petrographic study of the complex structure of the oriental border, in particular the studies of the leucocratic complex of veins and apophyses and of the schistous and calcareous metamorphic complex, leads to make assumptions on the relationship between terminal phase of the metamorphism and the hypo-thermal paragenesis. The abundance of facies and the intensity of metamorphism also give the possibility to establish relationships between the different minerals deposits. The metallogenic study shows that mineralization are all peripheral on the Tichka mountain and increase with the number and size of the apophysis which is observed on the east side. The various hypo-thermal paragenesis are studied in the same order of the associated apophysis. The peripheral meso-thermal deposits of the north area are briefly described to complete the metallogenic aspects of the oriental border of the Tichka mountain. This study shows the nature of the two main factors which originate different types of paragenesis: one is the intrusion deep of the mineralizer, the second is the physical and chemical nature of the medium where the paragenesis occurred. (M.P.)

  8. The Serra da Cangalha impact structure, Brazil: Geological, stratigraphic and petrographic aspects of a recently confirmed impact structure

    Science.gov (United States)

    Vasconcelos, Marcos Alberto Rodrigues; Crósta, Alvaro P.; Reimold, Wolf Uwe; Góes, Ana Maria; Kenkmann, Thomas; Poelchau, Michael H.

    2013-08-01

    Serra da Cangalha is a complex impact structure with an apparent diameter of 13.7 km located in essentially undisturbed sedimentary rocks of the Parnaíba basin in northeastern Brazil. The stratigraphy of the crater region includes, from bottom to top, the Longá, Poti, Piauí and Pedra de Fogo formations of Devonian to Late Permian age. The age of the impact event is constrained to collar of Poti Formation rocks. We divided Serra da Cangalha into four distinctive structural domains (i-iv), from the innermost zone outward. (i) The central domain, with an inner collar ˜1.5 km radius from the center, yielded all the samples with microscopic shock features identified so far. These include planar deformation features (PDF), feather features (FF), and planar fractures (PF) in quartz grains found in polymict breccias and shatter cones from the central depression. Furthermore, significant cementation with iron oxide is observed in the rocks of Serra da Cangalha, especially in the Poti Formation and in the polymict breccias, conferring to them a peculiar red color. Macroscopic deformation involves faulted, folded and subvertical strata within a ˜2.9 km radius from the center. (ii) The annular basin domain has limited outcrops; its most prominent features are two concentric annular ridges formed by chert breccias and fossilized wood-bearing folded strata of the Pedra de Fogo Formation. (iii) The crater rim and (iv) external domains comprise undisturbed strata of the Pedra de Fogo and Piauí formations with well-preserved sedimentary structures. Whilst the existing literature on Serra da Cangalha has focused on the structure morphology, general geology and some shock features, we present here a detailed description of the stratigraphy and the geology of each formation in the interior and around Serra da Cangalha, as well as further detailed microscopic shock feature analysis. This provides significant evidence that the rocks of the central uplift have undergone shock

  9. Determinants of Gastroesophageal Reflux Disease, Including Hookah Smoking and Opium Use– A Cross-Sectional Analysis of 50,000 Individuals

    Science.gov (United States)

    Islami, Farhad; Nasseri-Moghaddam, Siavosh; Pourshams, Akram; Poustchi, Hossein; Semnani, Shahryar; Kamangar, Farin; Etemadi, Arash; Merat, Shahin; Khoshnia, Masoud; Dawsey, Sanford M.; Pharoah, Paul D.; Brennan, Paul; Abnet, Christian C.; Boffetta, Paolo; Malekzadeh, Reza

    2014-01-01

    Background Gastroesophageal reflux disease (GERD) is a common cause of discomfort and morbidity worldwide. However, information on determinants of GERD from large-scale studies in low- to medium-income countries is limited. We investigated the factors associated with different measures of GERD symptoms, including frequency, patient-perceived severity, and onset time. Methods We performed a cross-sectional analysis of the baseline data from a population-based cohort study of ∼50,000 individuals in in Golestan Province, Iran. GERD symptoms in this study included regurgitation and/or heartburn. Results Approximately 20% of participants reported at least weekly symptoms. Daily symptoms were less commonly reported by men, those of Turkmen ethnicity, and nass chewers. On the other hand, age, body mass index, alcohol drinking, cigarette smoking, opium use, lower socioeconomic status, and lower physical activity were associated with daily symptoms. Most of these factors showed similar associations with severe symptoms. Women with higher BMI and waist to hip ratio were more likely to report frequent and severe GERD symptoms. Hookah smoking (OR 1.34, 95% CI 1.02–1.75) and opium use (OR 1.70, 95% CI 1.55–1.87) were associated with severe symptoms, whereas nass chewing had an inverse association (OR 0.87, 95% CI 0.76–0.99). After exclusion of cigarette smokers, hookah smoking was still positively associated and nass chewing was inversely associated with GERD symptoms (all frequencies combined). Conclusion GERD is common in this population. The associations of hookah and opium use and inverse association of nass use with GERD symptoms are reported for the first time. Further studies are required to investigate the nature of these associations. Other determinants of GERD were mostly comparable to those reported elsewhere. PMID:24586635

  10. Determinants of gastroesophageal reflux disease, including hookah smoking and opium use- a cross-sectional analysis of 50,000 individuals.

    Science.gov (United States)

    Islami, Farhad; Nasseri-Moghaddam, Siavosh; Pourshams, Akram; Poustchi, Hossein; Semnani, Shahryar; Kamangar, Farin; Etemadi, Arash; Merat, Shahin; Khoshnia, Masoud; Dawsey, Sanford M; Pharoah, Paul D; Brennan, Paul; Abnet, Christian C; Boffetta, Paolo; Malekzadeh, Reza

    2014-01-01

    Gastroesophageal reflux disease (GERD) is a common cause of discomfort and morbidity worldwide. However, information on determinants of GERD from large-scale studies in low- to medium-income countries is limited. We investigated the factors associated with different measures of GERD symptoms, including frequency, patient-perceived severity, and onset time. We performed a cross-sectional analysis of the baseline data from a population-based cohort study of ∼ 50,000 individuals in in Golestan Province, Iran. GERD symptoms in this study included regurgitation and/or heartburn. Approximately 20% of participants reported at least weekly symptoms. Daily symptoms were less commonly reported by men, those of Turkmen ethnicity, and nass chewers. On the other hand, age, body mass index, alcohol drinking, cigarette smoking, opium use, lower socioeconomic status, and lower physical activity were associated with daily symptoms. Most of these factors showed similar associations with severe symptoms. Women with higher BMI and waist to hip ratio were more likely to report frequent and severe GERD symptoms. Hookah smoking (OR 1.34, 95% CI 1.02-1.75) and opium use (OR 1.70, 95% CI 1.55-1.87) were associated with severe symptoms, whereas nass chewing had an inverse association (OR 0.87, 95% CI 0.76-0.99). After exclusion of cigarette smokers, hookah smoking was still positively associated and nass chewing was inversely associated with GERD symptoms (all frequencies combined). GERD is common in this population. The associations of hookah and opium use and inverse association of nass use with GERD symptoms are reported for the first time. Further studies are required to investigate the nature of these associations. Other determinants of GERD were mostly comparable to those reported elsewhere.

  11. Rapid identification of clinically significant species and taxa of aerobic actinomycetes, including Actinomadura, Gordona, Nocardia, Rhodococcus, Streptomyces, and Tsukamurella isolates, by DNA amplification and restriction endonuclease analysis.

    Science.gov (United States)

    Steingrube, V A; Wilson, R W; Brown, B A; Jost, K C; Blacklock, Z; Gibson, J L; Wallace, R J

    1997-04-01

    A previously described PCR-restriction fragment length polymorphism (RFLP) identification schema for Nocardia that used an amplified 439-bp segment (amplicon) of the 65-kDa heat shock protein gene was evaluated for potential use with isolates of all clinically significant aerobic actinomycetes. The study included 28 reference (American Type Culture Collection) strains and 198 clinical isolates belonging to 20 taxonomic groups. Of these 198 isolates, 188 could be differentiated by this PCR-RFLP method. Amplicons from all aerobic actinomycete isolates lacked BstEII recognition sites, thereby distinguishing them from those of mycobacteria that contain one or more such sites. Of 29 restriction endonucleases, MspI plus HinfI produced RFLP patterns that differentiated 16 of the 20 taxa. A single RFLP pattern was observed for 15 of 20 taxa that included 65% of phenotypically clustered isolates. Multiple patterns were seen with Gordona bronchialis, Nocardia asteroides complex type VI, Nocardia otitidiscaviarum, Nocardia transvalensis, and Streptomyces spp. Streptomyces RFLP patterns were the most heterogeneous (five patterns among 19 isolates), but exhibited a unique HinfI fragment of > 320 bp. RFLP patterns that matched those from type strains of Streptomyces albus, Streptomyces griseus, or Streptomyces somaliensis were obtained from 14 of 19 Streptomyces isolates. Only 10 of 28 isolates of N. otitidiscaviarum failed to yield satisfactory amplicons, while only 6 of 188 (3.2%) clinical isolates exhibited patterns that failed to match one of the 21 defined RFLP patterns. These studies extended the feasibility of using PCR-RFLP analysis as a rapid method for the identification of all clinically significant species and taxa of aerobic actinomycetes.

  12. Right versus left radial artery access for coronary procedures: an international collaborative systematic review and meta-analysis including 5 randomized trials and 3210 patients.

    Science.gov (United States)

    Biondi-Zoccai, Giuseppe; Sciahbasi, Alessandro; Bodí, Vicente; Fernández-Portales, Javier; Kanei, Yumiko; Romagnoli, Enrico; Agostoni, Pierfrancesco; Sangiorgi, Giuseppe; Lotrionte, Marzia; Modena, Maria Grazia

    2013-07-01

    Radial artery access is a mainstay in the diagnosis and treatment of coronary artery disease. However, there is uncertainty on the comparison of right versus left radial access for coronary procedures. We thus undertook a systematic review and meta-analysis comparing right versus left radial access for coronary diagnostic and interventional procedures. Pertinent studies were searched in CENTRAL, Google Scholar, MEDLINE/PubMed, and Scopus, together with international conference proceedings. Randomized trials comparing right versus left radial (or ulnar) access for coronary diagnostic or interventional procedures were included. Risk ratios (RR) and weighted mean differences (WMD) were computed to generate point estimates (95% confidence intervals). A total of 5 trials (3210 patients) were included. No overall significant differences were found comparing right versus left radial access in terms of procedural time (WMD=0.99 [-0.53; 2.51]min, p=0.20), contrast use (WMD=1.71 [-1.32; 4.74]mL, p=0.27), fluoroscopy time (WMD=-35.79 [-3.54; 75.12]s, p=0.07) or any major complication (RR=2.00 [0.75; 5.31], p=0.49). However, right radial access was fraught with a significantly higher risk of failure leading to cross-over to femoral access (RR=1.65 [1.18; 2.30], p=0.003) in comparison to left radial access. Right and left radial accesses appear largely similar in their overall procedural and clinical performance during transradial diagnostic or interventional procedures. Nonetheless, left radial access can be recommended especially during the learning curve phase to reduce femoral cross-overs. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  13. Simultaneous analysis of perfluoroalkyl and polyfluoroalkyl substances including ultrashort-chain C2 and C3 compounds in rain and river water samples by ultra performance convergence chromatography.

    Science.gov (United States)

    Yeung, Leo W Y; Stadey, Christopher; Mabury, Scott A

    2017-11-03

    An analytical method using ultra performance convergence chromatography (UPC 2 ) coupled to a tandem mass spectrometer operated in negative electrospray mode was developed to measure perfluoroalkyl and polyfluoroalkyl substances (PFASs) including the ultrashort-chain PFASs (C2-C3). Compared to the existing liquid chromatography tandem mass spectrometry method using an ion exchange column, the new method has a lower detection limit (0.4pg trifluoroacetate (TFA) on-column), narrower peak width (3-6s), and a shorter run time (8min). Using the same method, different classes of PFASs (e.g., perfluoroalkyl sulfonates (PFSAs) and perfluorinated carboxylates (PFCAs), perfluorinated phosphonates (PFPAs) and phosphinates (PFPiAs), polyfluoroalkyl phosphate diesters (diPAPs)) can be measured in a single analysis. Rain (n=2) and river water (n=2) samples collected in Toronto, ON, were used for method validation and application. Results showed that short-chain PFAS (C2-C7 PFCAs and C4 PFSA) contributed to over 80% of the detectable PFASs in rain samples and the C2-C3 PFASs alone accounted for over 40% of the total. Reports on environmental levels of these ultrashort-chain PFASs are relatively scarce. Relatively large contribution of these ultrashort-chain PFASs to the total PFASs indicate the need to include the measurement of short-chain PFASs, especially C2 and C3 PFASs, in environmental monitoring. The sources of TFA and other short-chain PFASs in the environment are not entirely clear. The newly developed analytical method may help further investigation on the sources and the environmental levels of these ultrashort-chain PFASs. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Non-pharmacological self-management for people living with migraine or tension-type headache: a systematic review including analysis of intervention components

    Science.gov (United States)

    Bowers, Hannah; Mistry, Dipesh; Caldwell, Fiona; Underwood, Martin; Patel, Shilpa; Sandhu, Harbinder Kaur; Matharu, Manjit; Pincus, Tamar

    2017-01-01

    Objectives To assess the effect of non-pharmacological self-management interventions against usual care, and to explore different components and delivery methods within those interventions Participants People living with migraine and/or tension-type headache Interventions Non-pharmacological educational or psychological self-management interventions; excluding biofeedback and physical therapy. We assessed the overall effectiveness against usual care on headache frequency, pain intensity, mood, headache-related disability, quality of life and medication consumption in meta-analysis. We also provide preliminary evidence on the effectiveness of intervention components and delivery methods. Results We found a small overall effect for the superiority of self-management interventions over usual care, with a standardised mean difference (SMD) of −0.36 (−0.45 to −0.26) for pain intensity; −0.32 (−0.42 to −0.22) for headache-related disability, 0.32 (0.20 to 0.45) for quality of life and a moderate effect on mood (SMD=0.53 (−0.66 to −0.40)). We did not find an effect on headache frequency (SMD=−0.07 (−0.22 to 0.08)). Assessment of components and characteristics suggests a larger effect on pain intensity in interventions that included explicit educational components (−0.51 (−0.68 to −0.34) vs −0.28 (−0.40 to −0.16)); mindfulness components (−0.50 (−0.82 to −0.18) vs 0.34 (−0.44 to −0.24)) and in interventions delivered in groups vs one-to-one delivery (0.56 (−0.72 to −0.40) vs −0.39 (−0.52 to −0.27)) and larger effects on mood in interventions including a cognitive–behavioural therapy (CBT) component with an SMD of −0.72 (−0.93 to −0.51) compared with those without CBT −0.41 (−0.58 to −0.24). Conclusion Overall we found that self-management interventions for migraine and tension-type headache are more effective than usual care in reducing pain intensity, mood and headache-related disability, but have no

  15. Polyphasic Approach Including MALDI-TOF MS/MS Analysis for Identification and Characterisation of Fusarium verticillioides in Brazilian Corn Kernels

    Directory of Open Access Journals (Sweden)

    Susane Chang

    2016-02-01

    Full Text Available Fusarium verticillioides is considered one of the most important global sources of fumonisins contamination in food and feed. Corn is one of the main commodities produced in the Northeastern Region of Brazil. The present study investigated potential mycotoxigenic fungal strains belonging to the F. verticillioides species isolated from corn kernels in 3 different Regions of the Brazilian State of Pernambuco. A polyphasic approach including classical taxonomy, molecular biology, MALDI-TOF MS and MALDI-TOF MS/MS for the identification and characterisation of the F. verticillioides strains was used. Sixty F. verticillioides strains were isolated and successfully identified by classical morphology, proteomic profiles of MALDI-TOF MS, and by molecular biology using the species-specific primers VERT-1 and VERT-2. FUM1 gene was further detected for all the 60 F. verticillioides by using the primers VERTF-1 and VERTF-2 and through the amplification profiles of the ISSR regions using the primers (GTG5 and (GACA4. Results obtained from molecular analysis shown a low genetic variability among these isolates from the different geographical regions. All of the 60 F. verticillioides isolates assessed by MALDI-TOF MS/MS presented ion peaks with the molecular mass of the fumonisin B1 (721.83 g/mol and B2 (705.83 g/mol.

  16. The potential of transnational language policy to promote social inclusion of immigrants: An analysis and evaluation of the European Union's INCLUDE project

    Science.gov (United States)

    Bian, Cui

    2017-08-01

    Language issues and social inclusion consistently remain two major concerns for member countries of the European Union (EU). Despite an increasing awareness of the importance of language learning in migrants' social inclusion, and the promotion of language policies at European and national levels, there is still a lack of common actions at the European level. Challenged by questions as to whether language learning should be prioritised as a human right or as human capital building, how host/mainstream language learning can be reinforced while respecting language diversity, and other problems, member countries still need to find solutions. Confronting these dilemmas, this study analyses the relationship and interactions between language learning and immigrants' social inclusion in different contexts. It explores the potential of enhancing the effectiveness of language policies via a dialogue between policies and practices in different national contexts and research studies in the field of language and social inclusion. The research data are derived from two databases created by a European policy for active social inclusion project called INCLUDE. This project ran from 2013 to 2016 under the EU's lifelong learning programme, with funding support from the European Commission. Through an analysis of these two project databases, the paper reviews recent national language policies and their effect on the social inclusion of migrants. In the second part of her article, the author interprets the process of language learning and social inclusion using poststructuralist theories of language and identity.

  17. Meta-analysis of the INSIG2 association with obesity including 74,345 individuals: does heterogeneity of estimates relate to study design?

    DEFF Research Database (Denmark)

    Heid, Iris M; Huth, Cornelia; Loos, Ruth J F

    2009-01-01

    with subjects selected for conditions related to a better health status ('healthy population', HP), and obesity studies (OB). We tested five hypotheses to explore potential sources of heterogeneity. The meta-analysis of 27 studies on Caucasian adults (n = 66,213) combining the different study designs did......The INSIG2 rs7566605 polymorphism was identified for obesity (BMI> or =30 kg/m(2)) in one of the first genome-wide association studies, but replications were inconsistent. We collected statistics from 34 studies (n = 74,345), including general population (GP) studies, population-based studies...... not support overall association of the CC-genotype with obesity, yielding an odds ratio (OR) of 1.05 (p-value = 0.27). The I(2) measure of 41% (p-value = 0.015) indicated between-study heterogeneity. Restricting to GP studies resulted in a declined I(2) measure of 11% (p-value = 0.33) and an OR of 1.10 (p...

  18. Morphology and SSU rDNA sequence analysis of two hypotrichous ciliates (Protozoa, Ciliophora, Hypotrichia) including the new species Metaurostylopsis parastruederkypkeae n. sp.

    Science.gov (United States)

    Lu, Borong; Wang, Chundi; Huang, Jie; Shi, Yuhong; Chen, Xiangrui

    2016-10-01

    The morphology and phylogeny of two hypotrichous ciliates, Metaurostylopsis parastruederkypkeae n. sp. and Neourostylopsis flavicana (Wang et al., 2011) Chen et al., 2013 were investigated based on morphology, infraciliature and the small subunit (SSU) ribosomal RNA gene (rRNA) sequence. The new species, M. parastruederkypkeae n. sp. was identified according to its characteristics: body shape ellipsoidal, size about (165-200) × (45-60) μm in vivo, cell color reddish; two types of cortical granules including wheat grain-like and yellow-greenish larger ones along the marginal cirri rows and dorsal kineties and dot-like and reddish smaller ones, grouped around marginal cirri on ventral side and arranged in short lines on dorsal side; 26-41 adoral membranelles; three frontal and one parabuccal, five to seven frontoterminal, one buccal, and three to six transverse cirri; seven to thirteen midventral pairs; five to nine unpaired ventral cirri, five to seven left and three to five right marginal rows; and three complete dorsal kineties. Phylogenetic analysis based on SSU rDNA sequences showed that both Metaurostylopsis and Neourostylopsis are monophyletic. As the internal relationship between and within both genera are not clear, further studies on the species in these two genera are necessary. The key characteristics of all known twelve Metaurostylopsis-Apourostylopsis-Neourostylopsis species complex were updated.

  19. Technical support document: Energy efficiency standards for consumer products: Refrigerators, refrigerator-freezers, and freezers including draft environmental assessment, regulatory impact analysis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The Energy Policy and Conservation Act (P.L. 94-163), as amended by the National Appliance Energy Conservation Act of 1987 (P.L. 100-12) and by the National Appliance Energy Conservation Amendments of 1988 (P.L. 100-357), and by the Energy Policy Act of 1992 (P.L. 102-486), provides energy conservation standards for 12 of the 13 types of consumer products` covered by the Act, and authorizes the Secretary of Energy to prescribe amended or new energy standards for each type (or class) of covered product. The assessment of the proposed standards for refrigerators, refrigerator-freezers, and freezers presented in this document is designed to evaluate their economic impacts according to the criteria in the Act. It includes an engineering analysis of the cost and performance of design options to improve the efficiency of the products; forecasts of the number and average efficiency of products sold, the amount of energy the products will consume, and their prices and operating expenses; a determination of change in investment, revenues, and costs to manufacturers of the products; a calculation of the costs and benefits to consumers, electric utilities, and the nation as a whole; and an assessment of the environmental impacts of the proposed standards.

  20. Trends in ectopic pregnancy rates following assisted reproductive technologies in the UK: a 12-year nationwide analysis including 160 000 pregnancies.

    Science.gov (United States)

    Santos-Ribeiro, Samuel; Tournaye, Herman; Polyzos, Nikolaos P

    2016-02-01

    Have the advancement of assisted reproductive technologies (ART) and changes in the incidence of specific causes of infertility-altered ectopic pregnancy (EP) rates following ART over time in the UK? EP rates in the UK following IVF/ICSI have progressively decreased, and this appears to be associated with a reduction in the incidence of tubal factor infertility and the increased use of both a lower number of embryos transferred and extended embryo culture. Historically, EP rates following ART are known to have increased over time. However, the impact of progress in ART procedures and changes in both policy and the incidence of specific causes of infertility on the overall EP rate in the UK has yet to be studied. A population-based retrospective analysis was carried out on all pregnancies following ART cycles carried out in the UK between 2000 and 2012 included in the anonymized database of the Human Fertilisation and Embryology Authority. Overall, 161 967 treatment cycles resulting in a pregnancy were included in the analysis. Among them, 8852 pregnancies occurred after intrauterine insemination (IUI) and 153 115 following IVF/ICSI. During this period of 12 years, ∼1.4% (n = 2244) of all pregnancies following ART were an EP. Crude EP rates were significantly higher after IVF/ICSI when compared with following IUI (1.4 versus 1.1%, P = 0.043). The incidence of EP decreased significantly over time for IVF/ICSI cycles [incidence rate ratios (IRR) 0.96 per year, 95% confidence interval (CI) 0.94-0.97], but not after IUI (IRR 0.96 per year, 95% CI 0.91-1.03).Among pregnancies resulting from IVF/ICSI, multivariable logistic regression analysis demonstrated that the major risk factor for EP was the presence of tubal infertility [adjusted odds ratio (aOR) 2.23, 95% CI 1.93-2.58), followed by the increased number of embryos transferred (aOR 1.29 for 2 versus 1 embryo transferred, 95% CI 1.11-1.49; aOR 1.69 for 3 or more versus 1 embryo transferred, 95% CI 1.35-2.11). The

  1. A Markov chain analysis of the movements of juvenile salmonids, including sockeye salmon, in the forebay of McNary Dam, Washington and Oregon, 2006-09

    Science.gov (United States)

    Adams, Noah S.; Hatton, Tyson W.

    2012-01-01

    Passage and survival data were collected at McNary Dam between 2006 and 2009. These data have provided critical information for resource managers to implement structural and operational changes designed to improve the survival of juvenile salmonids as they migrate past the dam. Much of the valuable information collected at McNary Dam was in the form of three-dimensional (hereafter referred to as 3-D) tracks of fish movements in the forebay. These data depicted the behavior of multiple species (in three dimensions) during different diel periods, spill conditions, powerhouse operations, and testing of the surface bypass structures (temporary spillway weirs; TSWs). One of the challenges in reporting 3-D results is presenting the information in a manner that allows interested parties to summarize the behavior of many fish over many different conditions across multiple years. To accomplish this, we used a Markov chain analysis to characterize fish movement patterns in the forebay of McNary Dam. The Markov chain analysis allowed us to numerically summarize the behavior of fish in the forebay. This report is the second report published in 2012 that uses this analytical method. The first report included only fish released as part of the annual studies conducted at McNary Dam. This second report includes sockeye salmon that were released as part of studies conducted by the Chelan and Grant County Public Utility Districts at mid-Columbia River dams. The studies conducted in the mid-Columbia used the same transmitters as were used for McNary Dam studies, but transmitter pulse width was different between studies. Additionally, no passive integrated transponder tags were implanted in sockeye salmon. Differences in transmitter pulse width resulted in lower detection probabilities for sockeye salmon at McNary Dam. The absence of passive integrated transponder tags prevented us from determining if fish passed the powerhouse through the juvenile bypass system (JBS) or turbines. To

  2. Meta-analysis of the INSIG2 association with obesity including 74,345 individuals: does heterogeneity of estimates relate to study design?

    Directory of Open Access Journals (Sweden)

    Iris M Heid

    2009-10-01

    Full Text Available The INSIG2 rs7566605 polymorphism was identified for obesity (BMI> or =30 kg/m(2 in one of the first genome-wide association studies, but replications were inconsistent. We collected statistics from 34 studies (n = 74,345, including general population (GP studies, population-based studies with subjects selected for conditions related to a better health status ('healthy population', HP, and obesity studies (OB. We tested five hypotheses to explore potential sources of heterogeneity. The meta-analysis of 27 studies on Caucasian adults (n = 66,213 combining the different study designs did not support overall association of the CC-genotype with obesity, yielding an odds ratio (OR of 1.05 (p-value = 0.27. The I(2 measure of 41% (p-value = 0.015 indicated between-study heterogeneity. Restricting to GP studies resulted in a declined I(2 measure of 11% (p-value = 0.33 and an OR of 1.10 (p-value = 0.015. Regarding the five hypotheses, our data showed (a some difference between GP and HP studies (p-value = 0.012 and (b an association in extreme comparisons (BMI> or =32.5, 35.0, 37.5, 40.0 kg/m(2 versus BMI<25 kg/m(2 yielding ORs of 1.16, 1.18, 1.22, or 1.27 (p-values 0.001 to 0.003, which was also underscored by significantly increased CC-genotype frequencies across BMI categories (10.4% to 12.5%, p-value for trend = 0.0002. We did not find evidence for differential ORs (c among studies with higher than average obesity prevalence compared to lower, (d among studies with BMI assessment after the year 2000 compared to those before, or (e among studies from older populations compared to younger. Analysis of non-Caucasian adults (n = 4889 or children (n = 3243 yielded ORs of 1.01 (p-value = 0.94 or 1.15 (p-value = 0.22, respectively. There was no evidence for overall association of the rs7566605 polymorphism with obesity. Our data suggested an association with extreme degrees of obesity, and consequently heterogeneous effects from different study designs may

  3. Enhanced Precision of the New Hologic Horizon Model Compared With the Old Discovery Model Is Less Evident When Fewer Vertebrae Are Included in the Analysis.

    Science.gov (United States)

    McNamara, Elizabeth A; Kilim, Holly P; Malabanan, Alan O; Whittaker, LaTarsha G; Rosen, Harold N

    The International Society for Clinical Densitometry guidelines recommend using locally derived precision data for spine bone mineral densities (BMDs), but do not specify whether data derived from L1-L4 spines correctly reflect the precision for spines reporting fewer than 4 vertebrae. Our experience suggested that the decrease in precision with successively fewer vertebrae is progressive as more vertebrae are excluded and that the precision for the newer Horizon Hologic model might be better than that for the previous model, and we sought to quantify. Precision studies were performed on Hologic densitometers by acquiring spine BMD in fast array mode twice on 30 patients, according to International Society for Clinical Densitometry guidelines. This was done 10 different times on various Discovery densitometers, and once on a Horizon densitometer. When 1 vertebral body was excluded from analysis, there was no significant deterioration in precision. When 2 vertebrae were excluded, there was a nonsignificant trend to poorer precision, and when 3 vertebrae were excluded, there was significantly worse precision. When 3 or 4 vertebrae were reported, the precision of the spine BMD measurement was significantly better on the Hologic Horizon than on the Discovery, but the difference in precision between densitometers narrowed and was no longer significant when 1 or 2 vertebrae were reported. The results suggest that (1) the measurement of in vivo spine BMD on the new Hologic Horizon densitometer is significantly more precise than on the older Discovery model; (2) the difference in precision between the Horizon and Discovery models decreases as fewer vertebrae are included; (3) the measurement of spine BMD is less precise as more vertebrae are excluded, but still quite reasonable even when only 1 vertebral body is included; and (4) when 3 vertebrae are reported, L1-L4 precision data can reasonably be used to report significance of changes in BMD. When 1 or 2 vertebrae are

  4. Analysis of scientific papers in the field of radiology and medical imaging included in Science Citation Index expanded and published by Turkish authors.

    Science.gov (United States)

    Akpinar, Erhan; Karçaaltincaba, Muşturay

    2010-09-01

    We aimed to analyze scientific papers published by Turkish authors in "radiology, nuclear medicine and medical imaging" journals included in the Science Citation Index Expanded and compared the number of published scientific papers from Turkey and other countries. We retrospectively searched all papers published by Turkish authors between 1945 and 2008 by using Web of Science software. We performed the analysis by typing "Turkey" in the address section and all radiology and medical imaging journals in the source title section using the general search function of the software. We further analyzed these results by using "analyze" function of the software according to the number of publications per year, journals, institution and type of papers. We also calculated total number of citations to published scientific papers using citation report function. We analyzed the rank of Turkey among other countries in terms of the number of published papers. Overall, 4,532 papers were published between 1945 and 2008. The first paper was published in 1976. Number of publications increased dramatically from 1976 (n = 1) to 2008 (n = 383). The top 5 journals publishing papers from Turkish authors were European Journal of Nuclear Medicine and Molecular Imaging (n = 328), Clinical Nuclear Medicine (n = 296), European Journal of Radiology (n = 289), European Radiology (n = 207) and Journal of Clinical Ultrasound (n = 186). All published papers received 18,419 citations and citation to paper ratio was 4.06. The rank of Turkey among other countries in terms of published papers improved during the last 25 years. Number of papers from Turkey published in radiology and medical imaging journals has increased at the start of the new millennium. Currently, Turkey is among the top 12 countries when the number of scientific papers published in radiology journals is taken into consideration.

  5. Analysis of Arbovirus Isolates from Australia Identifies Novel Bunyaviruses Including a Mapputta Group Virus from Western Australia That Links Gan Gan and Maprik Viruses.

    Directory of Open Access Journals (Sweden)

    Thomas Briese

    Full Text Available The Mapputta group comprises antigenically related viruses indigenous to Australia and Papua New Guinea that are included in the family Bunyaviridae but not currently assigned to a specific genus. We determined and analyzed the genome sequences of five Australian viruses isolated from mosquitoes collected during routine arbovirus surveillance in Western Australia (K10441, SW27571, K13190, and K42904 and New South Wales (12005. Based on matching sequences of all three genome segments to prototype MRM3630 of Trubanaman virus (TRUV, NB6057 of Gan Gan virus (GGV, and MK7532 of Maprik virus (MPKV, isolates K13190 and SW27571 were identified as TRUV, 12005 as GGV, and K42904 as a Mapputta group virus from Western Australia linking GGV and MPKV. The results confirmed serum neutralization data that had linked SW27571 to TRUV. The fifth virus, K10441 from Willare, was most closely related to Batai orthobunyavirus, presumably representing an Australian variant of the virus. Phylogenetic analysis also confirmed the close relationship of our TRUV and GGV isolates to two other recently described Australian viruses, Murrumbidgee virus and Salt Ash virus, respectively. Our findings indicate that TRUV has a wide circulation throughout the Australian continent, demonstrating for the first time its presence in Western Australia. Similarly, the presence of a virus related to GGV, which had been linked to human disease and previously known only from the Australian southeast, was demonstrated in Western Australia. Finally, a Batai virus isolate was identified in Western Australia. The expanding availability of genomic sequence for novel Australian bunyavirus variants supports the identification of suitably conserved or diverse primer-binding target regions to establish group-wide as well as virus-specific nucleic acid tests in support of specific diagnostic and surveillance efforts throughout Australasia.

  6. Analysis of Arbovirus Isolates from Australia Identifies Novel Bunyaviruses Including a Mapputta Group Virus from Western Australia That Links Gan Gan and Maprik Viruses.

    Science.gov (United States)

    Briese, Thomas; Williams, David T; Kapoor, Vishal; Diviney, Sinead M; Certoma, Andrea; Wang, Jianning; Johansen, Cheryl A; Chowdhary, Rashmi; Mackenzie, John S; Lipkin, W Ian

    2016-01-01

    The Mapputta group comprises antigenically related viruses indigenous to Australia and Papua New Guinea that are included in the family Bunyaviridae but not currently assigned to a specific genus. We determined and analyzed the genome sequences of five Australian viruses isolated from mosquitoes collected during routine arbovirus surveillance in Western Australia (K10441, SW27571, K13190, and K42904) and New South Wales (12005). Based on matching sequences of all three genome segments to prototype MRM3630 of Trubanaman virus (TRUV), NB6057 of Gan Gan virus (GGV), and MK7532 of Maprik virus (MPKV), isolates K13190 and SW27571 were identified as TRUV, 12005 as GGV, and K42904 as a Mapputta group virus from Western Australia linking GGV and MPKV. The results confirmed serum neutralization data that had linked SW27571 to TRUV. The fifth virus, K10441 from Willare, was most closely related to Batai orthobunyavirus, presumably representing an Australian variant of the virus. Phylogenetic analysis also confirmed the close relationship of our TRUV and GGV isolates to two other recently described Australian viruses, Murrumbidgee virus and Salt Ash virus, respectively. Our findings indicate that TRUV has a wide circulation throughout the Australian continent, demonstrating for the first time its presence in Western Australia. Similarly, the presence of a virus related to GGV, which had been linked to human disease and previously known only from the Australian southeast, was demonstrated in Western Australia. Finally, a Batai virus isolate was identified in Western Australia. The expanding availability of genomic sequence for novel Australian bunyavirus variants supports the identification of suitably conserved or diverse primer-binding target regions to establish group-wide as well as virus-specific nucleic acid tests in support of specific diagnostic and surveillance efforts throughout Australasia.

  7. Effectiveness of conservative interventions including exercise, manual therapy and medical management in adults with shoulder impingement: a systematic review and meta-analysis of RCTs

    Science.gov (United States)

    Steuri, Ruedi; Sattelmayer, Martin; Elsig, Simone; Kolly, Chloé; Tal, Amir; Taeymans, Jan

    2017-01-01

    Objective To investigate the effectiveness of conservative interventions for pain, function and range of motion in adults with shoulder impingement. Design Systematic review and meta-analysis of randomised trials. Data sources Medline, CENTRAL, CINAHL, Embase and PEDro were searched from inception to January 2017. Study selection criteria Randomised controlled trials including participants with shoulder impingement and evaluating at least one conservative intervention against sham or other treatments. Results For pain, exercise was superior to non-exercise control interventions (standardised mean difference (SMD) −0.94, 95% CI −1.69 to −0.19). Specific exercises were superior to generic exercises (SMD −0.65, 95% CI −0.99 to −0.32). Corticosteroid injections were superior to no treatment (SMD −0.65, 95% CI −1.04 to −0.26), and ultrasound guided injections were superior to non-guided injections (SMD −0.51, 95% CI −0.89 to −0.13). Nonsteroidal anti-inflammatory drugs (NSAIDS) had a small to moderate SMD of −0.29 (95% CI −0.53 to −0.05) compared with placebo. Manual therapy was superior to placebo (SMD −0.35, 95% CI −0.69 to −0.01). When combined with exercise, manual therapy was superior to exercise alone, but only at the shortest follow-up (SMD −0.32, 95% CI −0.62 to −0.01). Laser was superior to sham laser (SMD −0.88, 95% CI −1.48 to −0.27). Extracorporeal shockwave therapy (ECSWT) was superior to sham (−0.39, 95% CI −0.78 to –0.01) and tape was superior to sham (−0.64, 95% CI −1.16 to −0.12), with small to moderate SMDs. Conclusion Although there was only very low quality evidence, exercise should be considered for patients with shoulder impingement symptoms and tape, ECSWT, laser or manual therapy might be added. NSAIDS and corticosteroids are superior to placebo, but it is unclear how these treatments compare to exercise. PMID:28630217

  8. Health-Related Quality of Life in Locally Advanced Cervical Cancer Patients After Definitive Chemoradiation Therapy Including Image Guided Adaptive Brachytherapy: An Analysis From the EMBRACE Study

    International Nuclear Information System (INIS)

    Kirchheiner, Kathrin; Pötter, Richard; Tanderup, Kari; Lindegaard, Jacob C.; Haie-Meder, Christine; Petrič, Primož; Mahantshetty, Umesh; Jürgenliemk-Schulz, Ina M.; Rai, Bhavana; Cooper, Rachel; Dörr, Wolfgang; Nout, Remi A.; Lindegaard, Jacob; Tanderup, Kari; Fokdal, Lars; Van Der Steen Banasik, Elzbieta; Haie-Meder, Christine; Dumas, Isabelle

    2016-01-01

    Purpose: This study analyzed functioning and symptom scores for longitudinal quality of life (QoL) from patients with locally advanced cervical cancer who underwent definitive chemoradiation therapy with image guided adaptive brachytherapy in the EMBRACE study. Methods and Materials: In total, 744 patients at a median follow-up of 21 months were included. QoL was prospectively assessed using European Organization for Research and Treatment of Cancer Quality of Life core module 30 (EORTC QLQ-C30) and EORTC cervical cancer module 24 (CX24) questionnaires at baseline, then every 3 months during the first year, every 6 months in the second and third years, and finally yearly thereafter in patients with no evidence of disease. Outcomes were evaluated over time and compared to those from an age-matched female reference population. Results: General QoL and emotional and social functioning were impaired at baseline but improved during the first 6 months after treatment, to reach a level comparable to that of the reference population, whereas cognitive functioning remained impaired. Both social and role functioning showed the lowest scores at baseline but which increased after treatment to reach a plateau at 6 months and then declined slightly at 3 and 4 years. The overall symptom experience was elevated at baseline and decreased to a level within the range of that of the reference population. Similarly, tumor-related symptoms (eg, pain, appetite loss, and constipation), which were present before treatment, decreased substantially at the first follow-up after treatment. Several treatment-related symptoms developed either immediately after and persisted over time (diarrhea, menopausal symptoms, peripheral neuropathy, and sexual functioning problems) or developed gradually after treatment (lymphedema and dyspnea). Conclusions: This longitudinal prospective QoL analysis showed that patients' general QoL and functioning were impaired before treatment compared to

  9. Health-Related Quality of Life in Locally Advanced Cervical Cancer Patients After Definitive Chemoradiation Therapy Including Image Guided Adaptive Brachytherapy: An Analysis From the EMBRACE Study

    Energy Technology Data Exchange (ETDEWEB)

    Kirchheiner, Kathrin, E-mail: kathrin.kirchheiner@meduniwien.ac.at [Department of Radiation Oncology, Comprehensive Cancer Center, Medical University of Vienna and General Hospital of Vienna, Vienna (Austria); Pötter, Richard [Department of Radiation Oncology, Comprehensive Cancer Center, Medical University of Vienna and General Hospital of Vienna, Vienna (Austria); Christian Doppler Laboratory for Medical Radiation Research for Radiation Oncology, Medical University of Vienna, Vienna (Austria); Tanderup, Kari; Lindegaard, Jacob C. [Department of Oncology, Aarhus University Hospital, Aarhus (Denmark); Haie-Meder, Christine [Department of Radiotherapy, Gustave-Roussy, Villejuif (France); Petrič, Primož [Department of Radiotherapy, Institute of Oncology Ljubljana, Ljubljana (Slovenia); Department of Radiation Oncology, National Center for Cancer Care and Research, Doha (Qatar); Mahantshetty, Umesh [Department of Radiation Oncology, Tata Memorial Hospital, Mumbai (India); Jürgenliemk-Schulz, Ina M. [Department of Radiation Oncology, University Medical Centre Utrecht, Utrecht (Netherlands); Rai, Bhavana [Department of Radiotherapy and Oncology, Postgraduate Institute of Medical Education and Research, Chandigarh (India); Cooper, Rachel [Leeds Cancer Centre, St James' s University Hospital, Leeds (United Kingdom); Dörr, Wolfgang [Department of Radiation Oncology, Comprehensive Cancer Center, Medical University of Vienna and General Hospital of Vienna, Vienna (Austria); Christian Doppler Laboratory for Medical Radiation Research for Radiation Oncology, Medical University of Vienna, Vienna (Austria); Nout, Remi A. [Department of Radiation Oncology, Leiden University Medical Center, Leiden (Netherlands); Lindegaard, Jacob; Tanderup, Kari; Fokdal, Lars; Van Der Steen Banasik, Elzbieta; Haie-Meder, Christine; Dumas, Isabelle; and others

    2016-04-01

    Purpose: This study analyzed functioning and symptom scores for longitudinal quality of life (QoL) from patients with locally advanced cervical cancer who underwent definitive chemoradiation therapy with image guided adaptive brachytherapy in the EMBRACE study. Methods and Materials: In total, 744 patients at a median follow-up of 21 months were included. QoL was prospectively assessed using European Organization for Research and Treatment of Cancer Quality of Life core module 30 (EORTC QLQ-C30) and EORTC cervical cancer module 24 (CX24) questionnaires at baseline, then every 3 months during the first year, every 6 months in the second and third years, and finally yearly thereafter in patients with no evidence of disease. Outcomes were evaluated over time and compared to those from an age-matched female reference population. Results: General QoL and emotional and social functioning were impaired at baseline but improved during the first 6 months after treatment, to reach a level comparable to that of the reference population, whereas cognitive functioning remained impaired. Both social and role functioning showed the lowest scores at baseline but which increased after treatment to reach a plateau at 6 months and then declined slightly at 3 and 4 years. The overall symptom experience was elevated at baseline and decreased to a level within the range of that of the reference population. Similarly, tumor-related symptoms (eg, pain, appetite loss, and constipation), which were present before treatment, decreased substantially at the first follow-up after treatment. Several treatment-related symptoms developed either immediately after and persisted over time (diarrhea, menopausal symptoms, peripheral neuropathy, and sexual functioning problems) or developed gradually after treatment (lymphedema and dyspnea). Conclusions: This longitudinal prospective QoL analysis showed that patients' general QoL and functioning were impaired before treatment compared to

  10. Evaluation of the Repeatability of the Delta Q Duct Leakage Testing TechniqueIncluding Investigation of Robust Analysis Techniques and Estimates of Weather Induced Uncertainty

    Energy Technology Data Exchange (ETDEWEB)

    Dickerhoff, Darryl; Walker, Iain

    2008-08-01

    found in for the pressure station approach. Walker and Dickerhoff also included estimates of DeltaQ test repeatability based on the results of field tests where two houses were tested multiple times. The two houses were quite leaky (20-25 Air Changes per Hour at 50Pa (0.2 in. water) (ACH50)) and were located in the San Francisco Bay area. One house was tested on a calm day and the other on a very windy day. Results were also presented for two additional houses that were tested by other researchers in Minneapolis, MN and Madison, WI, that had very tight envelopes (1.8 and 2.5 ACH50). These tight houses had internal duct systems and were tested without operating the central blower--sometimes referred to as control tests. The standard deviations between the multiple tests for all four houses were found to be about 1% of the envelope air flow at 50 Pa (0.2 in. water) (Q50) that led to the suggestion of this as a rule of thumb for estimating DeltaQ uncertainty. Because DeltaQ is based on measuring envelope air flows it makes sense for uncertainty to scale with envelope leakage. However, these tests were on a limited data set and one of the objectives of the current study is to increase the number of tested houses. This study focuses on answering two questions: (1) What is the uncertainty associated with changes in weather (primarily wind) conditions during DeltaQ testing? (2) How can these uncertainties be reduced? The first question is addressing issues of repeatability. To study this five houses were tested as many times as possible over a day. Weather data was recorded on-site--including the local windspeed. The result from these five houses were combined with the two Bay Area homes from the previous studies. The variability of the tests (represented by the standard deviation) is the repeatability of the test method for that house under the prevailing weather conditions. Because the testing was performed over a day a wide range of wind speeds was achieved following

  11. Polished Stone Value Test and its relationship with petrographic parameters (hardness contrast and modal composition and surface micro-roughness in natural and artificial aggregates

    Directory of Open Access Journals (Sweden)

    Fernández, A.

    2013-09-01

    Full Text Available The goal of this work was first to establish the relationships between the PSV values and the microstructural and mineralogical features of the aggregates and surface micro-roughness, and then to establish the behavioural differences between natural and artificial aggregates. The results obtained indicate that the surface micro-roughness and the different PSV values of the natural aggregates are strongly governed by the existence of minerals with different degrees of hardness, together with the proportion of these minerals. In contrast, the different degree of porosity in artificial aggregates (a furnace slag was seen to be responsible for its high surface micro-roughness and PSV values. Finally, the PSV and a petrographic parameter (Overall Hardness Contrast, ΔH were seen to be related by an exponential curve (PSV=39.726ΔH0.057 with an extremely good fit, providing a good tool to estimate PSVs in natural and artificial aggregates from petrographic parameters.El objetivo de este trabajo es establecer, por un lado, las relaciones existentes del CPA con las características petrográficas de los áridos, así como su microrrugosidad superficial y, por otro, las diferencias de comportamiento entre áridos naturales y artificiales. Los resultados indican que en los áridos naturales la microrrugosidad superficial y el diferente valor del CPA están determinados, en gran medida, por las diferencias de dureza de sus minerales y también por la proporción en la que estos minerales se encuentran en las distintas litologías. Sin embargo, en los áridos artificiales (escorias de fundición su elevada porosidad es la responsable de su marcada microrrugosidad superficial y su elevado valor del CPA. Finalmente, se relaciona el CPA con un parámetro petrográfico (Contraste de Dureza Global, ΔH mediante una curva exponencial, cuyo excelente índice de regresión hace que sea factible estimar mediante el estudio petrográfico de un árido su valor del CPA

  12. Evolution of Pennsylvanian (Late Carboniferous) peat swamps of the Ruhr Basin, Germany: Comparison of palynological, coal petrographical and organic geochemical data

    Energy Technology Data Exchange (ETDEWEB)

    Jasper, K. [Institute of Geology and Geochemistry of Petroleum and Coal, Lochnerstr. 4-20, RWTH Aachen University, 52056 Aachen (Germany); Institute of Geology and Palaeontology, Lochnerstr. 4-20, RWTH Aachen University, 52056 Aachen (Germany); Hartkopf-Froeder, C. [Geological Survey North Rhine-Westphalia, de-Greiff-Strasse 195, 47803 Krefeld (Germany); Flajs, G. [Institute of Geology and Palaeontology, Lochnerstr. 4-20, RWTH Aachen University, 52056 Aachen (Germany); Littke, R. [Institute of Geology and Geochemistry of Petroleum and Coal, Lochnerstr. 4-20, RWTH Aachen University, 52056 Aachen (Germany)

    2010-09-01

    This study focuses on the reconstruction of the environment during peat swamp development. Eight coal and sedimentary organic rock bearing seam successions were examined all belonging to the Duckmantian (Pennsylvanian, Late Carboniferous). 410 samples were analysed with coal petrographical methods, 155 of these also by palynological methods. In addition, on 55 samples organic geochemical investigations were carried out with respect to n-alkanes and iso-alkanes. The established coal petrographical parameters gelification index (GI), tissue preservation index (TPI), groundwater index (GWI) and vegetation index (VI) were used to characterize different periods of peat swamp development. Furthermore, the new index WCI (= Water Cover Index) was introduced to reflect water level conditions by using the ratio between hydrophilous/hygrophilous and mesophilous plants. In this study the index is based on palynological data but can be equally applied when quantitative macrofloral counts are available. GI versus TPI values show two general trends of peat swamp evolution: low GI and TPI values as indicator for drier swamp conditions like ombrogenous mires and high GI and TPI values which show a trend to water covered environments like topogenous mires. In addition, ash yields and GWI versus VI data also emphasize a general trend from topogenous to ombrogenous mires. A decrease in water level towards the top of the seams and thus resulting in the development of domed mires is reflected by the newly introduced WCI. Hence, these parameters show recurrent peat swamp successions, characterized by mineral- and vitrinite-rich coals, typical for topogenous swamps and an evolution towards inertinite/liptinite-rich coals with low ash yield, typical for ombrogenous swamps. n-alkane ratios like the carbon preference index (CPI), pristane/n-C{sub 17}, phytane/n-C{sub 18}, pristane/phytane and the n-C{sub 17}/n-C{sub 27} relationship indicate a strong correlation of these parameters with

  13. Pump apparatus including deconsolidator

    Energy Technology Data Exchange (ETDEWEB)

    Sonwane, Chandrashekhar; Saunders, Timothy; Fitzsimmons, Mark Andrew

    2014-10-07

    A pump apparatus includes a particulate pump that defines a passage that extends from an inlet to an outlet. A duct is in flow communication with the outlet. The duct includes a deconsolidator configured to fragment particle agglomerates received from the passage.

  14. Additional guidance for including nuclear safety equivalency in the Canister Storage Building and Cold Vacuum Drying Facility final safety analysis report

    International Nuclear Information System (INIS)

    Garvin, L.J.

    1997-01-01

    This document provides guidance for the production of safety analysis reports that must meet both DOE Order 5480.23 and STD 3009, and be in compliance with the DOE regulatory policy that imposes certain NRC requirements

  15. Additional guidance for including nuclear safety equivalency in the Canister Storage Building and Cold Vacuum Drying Facility final safety analysis report

    Energy Technology Data Exchange (ETDEWEB)

    Garvin, L.J.

    1997-05-20

    This document provides guidance for the production of safety analysis reports that must meet both DOE Order 5480.23 and STD 3009, and be in compliance with the DOE regulatory policy that imposes certain NRC requirements.

  16. Numerical Analysis Technique for Sound Fields Including Perforated Plate(1st Report : Case in Which Vibration of Perforated Plate is not Considered)

    OpenAIRE

    次橋, 一樹; 田中, 俊光; 草苅, 樹宏

    2011-01-01

    Numerical analysis technique by boundary element method for three dimensional sound fields in cluding perforated plates is proposed. This technique is effective to design sound absorption structures of perforated plates efficiently. To verify validity of this numerical analysis method, the sound field in the acoustic tube in which perforated plate was installed was computed, and the results were compared with experiments. The predicted sound absorption coefficient and the sound pressure distr...

  17. Optical modulator including grapene

    Science.gov (United States)

    Liu, Ming; Yin, Xiaobo; Zhang, Xiang

    2016-06-07

    The present invention provides for a one or more layer graphene optical modulator. In a first exemplary embodiment the optical modulator includes an optical waveguide, a nanoscale oxide spacer adjacent to a working region of the waveguide, and a monolayer graphene sheet adjacent to the spacer. In a second exemplary embodiment, the optical modulator includes at least one pair of active media, where the pair includes an oxide spacer, a first monolayer graphene sheet adjacent to a first side of the spacer, and a second monolayer graphene sheet adjacent to a second side of the spacer, and at least one optical waveguide adjacent to the pair.

  18. Results of chemical analysis from the 2008-2009 National Rivers and Streams Assessment Survey, including persistent organic pollutants and pharmaceuticals

    Data.gov (United States)

    U.S. Environmental Protection Agency — In 2008-2009, fish are were collected from approximately 560 national streams, which included a representative subset of 154 urban river sites, which were in close...

  19. Ion beam techniques for the analysis of light elements in thin films, including depth profiling. Final report of a co-ordinated research project 2000-2003

    International Nuclear Information System (INIS)

    2004-10-01

    This publication highlights the achievements of a Coordinated Research Project (CRP) to promote the potential of accelerator-based nuclear techniques of analysis for light elements in thin films. The objectives of this CRP were to develop a coordinated research effort between accelerator laboratories and materials science research groups in order to assist and promote the development of quality assurance methods, to evaluate databases of parameters needed for quantitative analysis, and to develop and apply techniques to selected problems concerning the surface modification of materials and production of thin films. Through various case studies, this publication assesses and demonstrates the effectiveness of accelerator-based nuclear techniques for analysis to provide valuable data and knowledge not readily accessible using other methods

  20. Comparison between two sampling methods by results obtained using petrographic techniques, specially developed for minerals of the Itataia uranium phosphate deposit, Ceara, Brazil

    International Nuclear Information System (INIS)

    Salas, H.T.; Murta, R.L.L.

    1985-01-01

    The results of comparison of two sampling methods applied to a gallery of the uranium-phosphate ore body of Itataia-Ceara State, Brazil, along 235 metres of mineralized zone, are presented. The results were obtained through petrographic techniques especially developed and applied to both samplings. In the first one it was studied hand samples from a systematically sampling made at intervals of 2 metres. After that, the estimated mineralogical composition studies were carried out. Some petrogenetic observations were for the first time verified. The second sampling was made at intervals of 20 metres and 570 tons of ore extracted and distributed in sections and a sample representing each section was studied after crushing at -65. Their mineralogy were quantified and the degree of liberation of apatite calculated. Based on the mineralogical data obtained it was possible to represent both samplings and to make the comparison of the main mineralogical groups (phosphates, carbonates and silicates). In spite of utilizing different methods and methodology and the kind of mineralization, stockwork, being quite irregular, the results were satisfactory. (Author) [pt

  1. 3D base: a geometrical data base system for the analysis and visualisation of 3D-shapes obtained from parallel serial sections including three different geometrical representations

    NARCIS (Netherlands)

    Verbeek, F. J.; de Groot, M. M.; Huijsmans, D. P.; Lamers, W. H.; Young, I. T.

    1993-01-01

    In this paper we discuss a geometrical data base that includes three different geometrical representations of one and the same reconstructed 3D shape: the contour-pile, the voxel enumeration, and the triangulation of a surface. The data base is tailored for 3D shapes obtained from plan-parallel

  2. Detection of irradiated ingredients included in low quantity in non-irradiated food matrix. 1. Extraction and ESR analysis of bones from mechanically recovered poultry meat

    NARCIS (Netherlands)

    Marchioni, Eric; Horvatovich, Péter; Charon, Helène; Kuntz, Florent

    2005-01-01

    Protocol EN 1786 for the detection of irradiated food by electron spin resonance (ESR) spectroscopy was not conceived for the detection of irradiated bone-containing ingredients included in low concentration in non-irradiated food. An enzymatic hydrolysis method, realized at 55 degrees C, has been

  3. ANALYSIS OF EFFICIENCY OF R&D ACTIVITIES AMONG COUNTRIES WITH DEVELOPED AND DEVELOPING ECONOMIES INCLUDING REPUBLIC OF BELARUS WITH STOCHASTIC FRONTIER APPROACH

    Directory of Open Access Journals (Sweden)

    I. V. Zhukovski

    2016-01-01

    Full Text Available This study evaluates efficiency of R&D activities based on the stochastic frontier analysis across 69 counties with developed and developing economies. Gross domestic expenditures on R&D in purchasing power parity, researchers per million inhabitants, technicians per million inhabitants are treated as inputs while patents granted to residents and scientific and technical journal articles are considered as outputs. According to the analysis results Costa Rica, Israel and Singapore are the most efficient in terms of transformation of available resources into the R&D results. What concerns Belarus it is necessary that additional investments in R&D go together with increasing efficiency of available resources’ usage. 

  4. The New version of Danish food composition database FRIDA including a case study on recipe calculation compared to a chemical analysis

    DEFF Research Database (Denmark)

    /French fry mix (n=16) had significant differences (Pfast food type with the largest difference between the two methods. Significance: Recipe calculation is a cost-effective alternative to chemical analysis in dietary assessment and nutrient labeling. But recipe...... and chemical analysis of fast food based on data from http://frida.fooddata.dk. Materials and methods: New fast food data in http://frida.fooddata.dk was based on 135 samples of ready to eat fast foods as burgers and sandwiches collected from fast food outlets, separated into their recipe components which were...... weighed. Typical components were bread, French fries, vegetables, meat, and dressings. The fast foods were analyzed and the content of energy, protein, saturated fat, iron, thiamin, potassium and sodium were compared to recipe calculation. Wilcoxon Signed Rank test, Spearman correlation coefficients...

  5. The New version of Danish food composition database FRIDA including a case study on recipe calculation compared to a chemical analysis

    DEFF Research Database (Denmark)

    Biltoft-Jensen, Anja Pia; Saxholt, Erling; Knuthsen, Pia

    %). Correlations ranged from 0.49 for iron to 0.75 for energy. Bland-Altman plots showed larger differences for higher contents for thiamin and potassium. Results depended on the type of fast food. For burgers (n=36) there was no significant difference for any of the nutrients between the two methods. Meat....../French fry mix (n=16) had significant differences (Pfast food type with the largest difference between the two methods. Significance: Recipe calculation is a cost-effective alternative to chemical analysis in dietary assessment and nutrient labeling. But recipe...... and chemical analysis of fast food based on data from http://frida.fooddata.dk. Materials and methods: New fast food data in http://frida.fooddata.dk was based on 135 samples of ready to eat fast foods as burgers and sandwiches collected from fast food outlets, separated into their recipe components which were...

  6. A Study to Determine the Feasibility of Including the Direct Experiences of Microteaching and Team Teaching, and Interaction Analysis Training in the Pre-Service Training of Foreign Language Teachers.

    Science.gov (United States)

    Wolfe, David Edwin

    This study examines potentially significant factors in the training of foreign language teachers. Remarks on microteaching and interaction analysis precede a review and analysis of related literature. Included in this section are the Stanford University Summer Intern Program, Amidon's model of microteaching and interaction analysis, and…

  7. [Analysis on literatures about clinical treatment of low back pain with acupuncture and moxibustion published in the periodicals included by SCI in recent 5 years].

    Science.gov (United States)

    Jiang, Chui-gang

    2007-03-01

    To explore the development state of acupuncture and moxibustion therapy in the world. Retrieve and analyze the literatures about clinically treating low back pain with acupuncture and moxibustion published at periodicals included by SCI in recent 5 years in Pubmed. Nineteen concerned literatures were retrieved. Authors of the literatures come from USA, Germany, Hong Kong of China, UK (including Northern Ireland) , Austria, Sweden and Italy. The literatures were published at Altern Ther Health Med, Am J Phys Med Rehabil, Anesth Analg, Arch Intern Med, Forsch Komplementärmed Klass Naturheilkd, Health Technol Assess, Rheumatology (Oxford), South Med J, Spine, Complment Ther Med, Pain. Three researches show that efficacy of acupuncture is uncertain. Other researches support the efficacy of acupuncture. The researches on treating low back pain with acupuncture and moxibustion are still mainly about efficacy of the acupuncture and moxibustion therapy. The acupuncture and moxibustion therapy is still in the process of gradually admitted by international medicine.

  8. Menarche, menopause, and breast cancer risk: individual participant meta-analysis, including 118 964 women with breast cancer from 117 epidemiological studies

    DEFF Research Database (Denmark)

    Beral, V.; Bull, D.; Pirie, K.

    2012-01-01

    by age at menopause were stronger for oestrogen receptor-positive disease than for oestrogen receptor-negative disease (p effects of menarche and menopause on breast cancer risk might not be acting merely by lengthening women's total number of reproductive......Background Menarche and menopause mark the onset and cessation, respectively, of ovarian activity associated with reproduction, and affect breast cancer risk. Our aim was to assess the strengths of their effects and determine whether they depend on characteristics of the tumours or the affected...... women. Methods Individual data from 117 epidemiological studies, including 118 964 women with invasive breast cancer and 306 091 without the disease, none of whom had used menopausal hormone therapy, were included in the analyses. We calculated adjusted relative risks (RRs) associated with menarche...

  9. What is included with your online e-cigarette order? An analysis of e-cigarette shipping, product and packaging features.

    Science.gov (United States)

    Kong, Amanda Y; Derrick, Jason C; Abrantes, Anthony S; Williams, Rebecca S

    2016-06-29

    The electronic cigarette industry is growing, with youth using e-cigarettes at higher rates than they are using cigarettes, and retail and online sales projected to reach $10 billion in 2017. Minimal regulation of the production and marketing of e-cigarettes exists to date, which has allowed companies to promote unsupported claims. We assessed the shipping, product features and packaging of a wide variety of e-cigarettes purchased online by adults and youth. The most popular internet e-cigarette vendors were identified from a larger study of internet tobacco vendors. Between August 2013 and June 2014, adults made 56 purchase attempts from online vendors, and youth made 98 attempts. Packages received were assessed for exterior and internal packaging features, including product information, health warnings and additional materials. We analysed a total of 125 orders featuring 86 unique brands of e-cigarettes. The contents were rarely indicated on package exteriors. Product information came with just 60% of orders and just 38.4% included an instruction manual. Only 44.6% of products included a health warning, and some had unsupported claims, such as lack of secondhand smoke exposure. Additionally, some products were leaking e-liquid and battery fluid on arrival. A large variety of e-cigarette products are manufactured and marketed to consumers. Many products do not include instructions for use, and unsupported claims are being presented to consumers. Effective federal regulation of the manufacturing, packaging, product information and health claims surrounding e-cigarettes is necessary to ensure consumers are presented with accurate e-cigarette use information. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  10. Menarche, menopause, and breast cancer risk: Individual participant meta-analysis, including 118 964 women with breast cancer from 117 epidemiological studies

    OpenAIRE

    Hamajima, N; Hirose, K; Tajima, K; Rohan, T; Friedenreich, CM; Calle, EE; Gapstur, SM; Patel, AV; Coates, RJ; Liff, JM; Talamini, R; Chantarakul, N; Koetsawang, S; Rachawat, D; Marcou, Y

    2012-01-01

    BACKGROUND: Menarche and menopause mark the onset and cessation, respectively, of ovarian activity associated with reproduction, and affect breast cancer risk. Our aim was to assess the strengths of their effects and determine whether they depend on characteristics of the tumours or the affected women. METHODS: Individual data from 117 epidemiological studies, including 118 964 women with invasive breast cancer and 306 091 without the disease, none of whom had used menopausal hormone thera...

  11. Simplifying sample pretreatment: application of dried blood spot (DBS) method to blood samples, including postmortem, for UHPLC-MS/MS analysis of drugs of abuse.

    Science.gov (United States)

    Odoardi, Sara; Anzillotti, Luca; Strano-Rossi, Sabina

    2014-10-01

    The complexity of biological matrices, such as blood, requires the development of suitably selective and reliable sample pretreatment procedures prior to their instrumental analysis. A method has been developed for the analysis of drugs of abuse and their metabolites from different chemical classes (opiates, methadone, fentanyl and analogues, cocaine, amphetamines and amphetamine-like substances, ketamine, LSD) in human blood using dried blood spot (DBS) and subsequent UHPLC-MS/MS analysis. DBS extraction required only 100μL of sample, added with the internal standards and then three droplets (30μL each) of this solution were spotted on the card, let dry for 1h, punched and extracted with methanol with 0.1% of formic acid. The supernatant was evaporated and the residue was then reconstituted in 100μL of water with 0.1% of formic acid and injected in the UHPLC-MS/MS system. The method was validated considering the following parameters: LOD and LOQ, linearity, precision, accuracy, matrix effect and dilution integrity. LODs were 0.05-1ng/mL and LOQs were 0.2-2ng/mL. The method showed satisfactory linearity for all substances, with determination coefficients always higher than 0.99. Intra and inter day precision, accuracy, matrix effect and dilution integrity were acceptable for all the studied substances. The addition of internal standards before DBS extraction and the deposition of a fixed volume of blood on the filter cards ensured the accurate quantification of the analytes. The validated method was then applied to authentic postmortem blood samples. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  12. Stereochemistry of C18 monounsaturated cork suberin acids determined by spectroscopic techniques including (1) H-NMR multiplet analysis of olefinic protons.

    Science.gov (United States)

    Santos, Sara; Graça, José

    2014-01-01

    Suberin is a biopolyester responsible for the protection of secondary plant tissues, and yet its molecular structure remains unknown. The C18:1 ω-hydroxyacid and the C18:1 α,ω-diacid are major monomers in the suberin structure, but the configuration of the double bond remains to be elucidated. To unequivocally define the configuration of the C18:1 suberin acids. Pure C18:1 ω-hydroxyacid and C18:1 α,ω-diacid, isolated from cork suberin, and two structurally very close C18:1 model compounds of known stereochemistry, methyl oleate and methyl elaidate, were analysed by NMR spectroscopy, Fourier transform infrared (FTIR) and Raman spectroscopy, and GC-MS. The GC-MS analysis showed that both acids were present in cork suberin as only one geometric isomer. The analysis of dimethyloxazoline (DMOX) and picolinyl derivatives proved the double bond position to be at C-9. The FTIR spectra were concordant with a cis-configuration for both suberin acids, but their unambiguous stereochemical assignment came from the NMR analysis: (i) the chemical shifts of the allylic (13) C carbons were shielded comparatively to the trans model compound, and (ii) the complex multiplets of the olefinic protons could be simulated only with (3) JHH and long-range (4) JHH coupling constants typical of a cis geometry. The two C18:1 suberin acids in cork are (Z)-18-hydroxyoctadec-9-enoic acid and (Z)-octadec-9-enedoic acid. Copyright © 2013 John Wiley & Sons, Ltd.

  13. [On the increase in mortality in Italy in 2015: analysis of seasonal mortality in the 32 municipalities included in the Surveillance system of daily mortality].

    Science.gov (United States)

    Michelozzi, Paola; De' Donato, Francesca; Scortichini, Matteo; De Sario, Manuela; Asta, Federica; Agabiti, Nera; Guerra, Ranieri; de Martino, Annamaria; Davoli, Marina

    2016-01-01

    the Italian National Institute of Statistics (Istat) estimated an increase in mortality in Italy of 11.3% between January and August 2015 compared to the previous year. During summer 2015, an excess in mortality, attributed to heat waves, was observed. to estimate the excess mortality in 2015 using data from the rapid mortality surveillance system (SiSMG) operational in 32 Italian cities. time series models were used to estimate the excess in mortality among the elderly (65+ years) in 2015 by season (winter and summer). Excess mortality was defined as the difference between observed daily and expected (baseline) mortality for the five previous years (2009- 2013); seasonal mortality in 2015 was compared with mortality observed in 2012, 2013, and 2014. An analysis by cause of death (cardiovascular and respiratory), gender, and age group was carried out in Rome. data confirm an overall estimated excess in mortality of +11% in 2015. Seasonal analysis shows a greater excess in winter (+13%) compared to the summer period (+10%). The excess in winter deaths seems to be attributable to the peak in influenza rather than to low temperatures. Summer excess mortality was attributed to the heat waves of July and August 2015. The lower mortality registered in Italy during summer 2014 (-5.9%) may have contributed to the greater excess registered in 2015. In Rome, cause-specific analysis showed a higher excess among the very old (85+ years) mainly for cardiovascular and respiratory causes in winter. In summer, the excess was observed among both the elderly and in the adult population (35-64 years). results suggest the need for a more timely use of mortality data to evaluate the impact of different risk factors. Public health measures targeted to susceptible subgroups should be enhanced (e.g., Heat Prevention Plans, flu vaccination campaigns).

  14. Human factors issues and approaches in the spatial layout of a space station control room, including the use of virtual reality as a design analysis tool

    Science.gov (United States)

    Hale, Joseph P., II

    1994-01-01

    Human Factors Engineering support was provided for the 30% design review of the late Space Station Freedom Payload Control Area (PCA). The PCA was to be the payload operations control room, analogous to the Spacelab Payload Operations Control Center (POCC). This effort began with a systematic collection and refinement of the relevant requirements driving the spatial layout of the consoles and PCA. This information was used as input for specialized human factors analytical tools and techniques in the design and design analysis activities. Design concepts and configuration options were developed and reviewed using sketches, 2-D Computer-Aided Design (CAD) drawings, and immersive Virtual Reality (VR) mockups.

  15. Analysis of technological innovation in Danish wind turbine industry - including the Test Station for Windturbines dual roll as research institution and certification authority

    International Nuclear Information System (INIS)

    Dannemand Andersen, P.

    1993-01-01

    The overall aim of this thesis is to examine the interactions between the Danish wind turbine industry and the Test Station for Wind Turbines. Because these interactions are concerning technological innovation, it follows that the innovation processes within the enterprises must be analyzed and modelled. The study is carried out as an iterative model-developing process using case study methods. The findings from some less structured interviews are discussed with literature and forms a basis for models and new interviews. The thesis is based on interviews with 20 R and D engineers in the Danish wind turbine industry, 7 engineers at The Test Station and 7 people involved in wind power abroad (American and British). The theoretical frame for this thesis is sociology/organizational theory and industrial engineering. The thesis consists of five main sections, dealing with technology and knowledge, innovation processes, organizational culture, innovation and interaction between the Test Station's research activities and the companies' innovation processes, and finally interaction through the Test Stations certification activity. First a taxonomy for technology and knowledge is established in order to clarify what kind of technology the interactions are all about, and what kind of knowledge is transferred during the interactions. This part of the thesis also contains an analysis of the patents drawn by the Danish wind turbine industry. The analysis shows that the Danish wind turbine industry do not use patents. Instead the nature of the technology and the speed of innovation are used to protect the industry's knowledge. (EG) (192 refs.)

  16. A Web-Based Tool for Automatic Data Collection, Curation, and Visualization of Complex Healthcare Survey Studies including Social Network Analysis

    Directory of Open Access Journals (Sweden)

    José Alberto Benítez

    2017-01-01

    Full Text Available There is a great concern nowadays regarding alcohol consumption and drug abuse, especially in young people. Analyzing the social environment where these adolescents are immersed, as well as a series of measures determining the alcohol abuse risk or personal situation and perception using a number of questionnaires like AUDIT, FAS, KIDSCREEN, and others, it is possible to gain insight into the current situation of a given individual regarding his/her consumption behavior. But this analysis, in order to be achieved, requires the use of tools that can ease the process of questionnaire creation, data gathering, curation and representation, and later analysis and visualization to the user. This research presents the design and construction of a web-based platform able to facilitate each of the mentioned processes by integrating the different phases into an intuitive system with a graphical user interface that hides the complexity underlying each of the questionnaires and techniques used and presenting the results in a flexible and visual way, avoiding any manual handling of data during the process. Advantages of this approach are shown and compared to the previous situation where some of the tasks were accomplished by time consuming and error prone manipulations of data.

  17. An optimized method for fatty acid analysis, including quantification of trans fatty acids, in human adipose tissue by gas-liquid chromatography

    DEFF Research Database (Denmark)

    Bysted, Anette; Cold, S; Hølmer, Gunhild Kofoed

    1999-01-01

    for 25 min, and finally raised at 25 degrees C/min to 225 degrees C. The trans and cis isomers of18:1 were well separated from each other, as shown by silver-ion thin-layer chromatography. Verification by standardsshowed that the trans 18:1 isomers with a double bond in position 12 or lower were......Considering the need for a quick direct method for measurement of the fatty acid composition including trans isomers ofhuman adipose tissue we have developed a procedure using gas-liquid chromatography (GLC) alone, which is thussuitable for validation of fatty acid status in epidemiological studies...

  18. Dynamic Regulation of a Cell Adhesion Protein Complex Including CADM1 by Combinatorial Analysis of FRAP with Exponential Curve-Fitting

    Science.gov (United States)

    Sakurai-Yageta, Mika; Maruyama, Tomoko; Suzuki, Takashi; Ichikawa, Kazuhisa; Murakami, Yoshinori

    2015-01-01

    Protein components of cell adhesion machinery show continuous renewal even in the static state of epithelial cells and participate in the formation and maintenance of normal epithelial architecture and tumor suppression. CADM1 is a tumor suppressor belonging to the immunoglobulin superfamily of cell adhesion molecule and forms a cell adhesion complex with an actin-binding protein, 4.1B, and a scaffold protein, MPP3, in the cytoplasm. Here, we investigate dynamic regulation of the CADM1-4.1B-MPP3 complex in mature cell adhesion by fluorescence recovery after photobleaching (FRAP) analysis. Traditional FRAP analysis were performed for relatively short period of around 10min. Here, thanks to recent advances in the sensitive laser detector systems, we examine FRAP of CADM1 complex for longer period of 60 min and analyze the recovery with exponential curve-fitting to distinguish the fractions with different diffusion constants. This approach reveals that the fluorescence recovery of CADM1 is fitted to a single exponential function with a time constant (τ) of approximately 16 min, whereas 4.1B and MPP3 are fitted to a double exponential function with two τs of approximately 40-60 sec and 16 min. The longer τ is similar to that of CADM1, suggesting that 4.1B and MPP3 have two distinct fractions, one forming a complex with CADM1 and the other present as a free pool. Fluorescence loss in photobleaching analysis supports the presence of a free pool of these proteins near the plasma membrane. Furthermore, double exponential fitting makes it possible to estimate the ratio of 4.1B and MPP3 present as a free pool and as a complex with CADM1 as approximately 3:2 and 3:1, respectively. Our analyses reveal a central role of CADM1 in stabilizing the complex with 4.1B and MPP3 and provide insight in the dynamics of adhesion complex formation. PMID:25780926

  19. PM2.5 chemical composition at a rural background site in Central Europe, including correlation and air mass back trajectory analysis

    Science.gov (United States)

    Schwarz, Jaroslav; Cusack, Michael; Karban, Jindřich; Chalupníčková, Eva; Havránek, Vladimír; Smolík, Jiří; Ždímal, Vladimír

    2016-07-01

    PM2.5 mass concentrations and chemical compositions sampled over a 13-month period at a Central European rural background site (Košetice) are presented in this work. A comprehensive chemical analysis of PM2.5 was performed, which provided elemental composition (Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br, Rb, Sr, Y, Zr, and Pb) and the concentration of water-soluble inorganic anions (SO42 -, NO3-. Cl-, NO2-, Br-, and H2PO4-) and cations (Na+, NH4+, K+, Ca2 +, and Mg2 +), elemental and organic carbon (EC and OC), and levoglucosan. Spearman correlation coefficients between individual chemical species and particle number concentrations were calculated for the following six size ranges: 10-25 nm (N10-25), 25-50 nm (N25-50), 50-80 nm (N50-80), 80-150 nm (N80-150), 150-300 nm (N150-300), and 300-800 nm (N300-800). Average concentrations of individual species were comparable with concentrations reported from similar sites across Central Europe. Organic matter (OM) accounted for 45% of the PM2.5 mass (calculated from OC by a factor of 1.6), while the second most common component were secondary aerosols (SO42 -: 19%, NO3-: 14%, NH4+: 10%), which accounted for 43% of the mass. Based on levoglucosan analysis, 31% of OM was attributed to emissions associated with biomass burning (OMBB). EC concentrations, determined using the EUSAAR_2 thermal optical protocol, contributed 4% to PM2.5 mass. A total of 1% of the mass was attributed to a mineral matter source, while the remaining 6% was from an undetermined mass. Seasonal variations showed highest concentrations of NO3- and OMBB in winter, nitrate share in spring, and an increase in percentage of SO42 - and mineral matter in summer. The largest seasonal variation was found for species associated with wood and coal combustion (levoglucosan, K+, Zn, Pb, As), which had clear maxima during winter. Correlation analysis of different size fraction particle number concentrations was used to distinguish the influence

  20. Technical–economic analysis of including wind farms and HFC to solve hybrid TNEM–RPM problem in the deregulated environment

    International Nuclear Information System (INIS)

    Shayeghi, H.; Hashemi, Y.

    2014-01-01

    Highlights: • Capability of wind farms is contributed in the problem of hybrid TNEM–RPM. • Inclusion of HFC as a novel and versatile device to implement hybrid TNEM–RPM. • INSGA-II optimization and FDM method is applied to specify the best solution. • Simulation study is conducted on the real power system of Iran. - Abstract: This paper addresses a mathematical model for solving transmission network expansion management (TNEM) associated with reactive power management (RPM) in the presence of double-fed induction generator (DFIG) variable speed wind turbine and hybrid flow controller (HFC). According to this plan, the reactive power capability of DFIG wind turbine is gained and the constraints of deliverable power are derived for each operation point. Strong control capability of the HFC with controlling bus voltage and line power flow offers a great potential for solving many of the problems facing electric utilities. For a precise steady-state analysis of HFC, the injection model is considered which it is an adaptive model in steady-state analysis. The main goals of the proposed management strategy are to minimize investment cost, real power loss cost in transmission lines and voltage deviation and maximize voltage stability index and social benefit at the same time. A three-stage scheme has been developed for solving hybrid TNEM–RPM problem. In the beginning of the plan, it is assumed that all the reactive demands are acquired from local sources and an optimal transmission plan is specified. After transmission lines are constructed, in the second step, reactive power sources will be allocated to weak buses. In order to assess reliability of the system, EENS criterion is used. Due to multi-objective nature of the proposed management method, an improved non-dominated sorting genetic algorithm-II (INSGA-II) style is applied for an optimization procedure. Also, a decision making method based on fuzzy decision making (FDM) is used for finding the best

  1. Dynamic regulation of a cell adhesion protein complex including CADM1 by combinatorial analysis of FRAP with exponential curve-fitting.

    Science.gov (United States)

    Sakurai-Yageta, Mika; Maruyama, Tomoko; Suzuki, Takashi; Ichikawa, Kazuhisa; Murakami, Yoshinori

    2015-01-01

    Protein components of cell adhesion machinery show continuous renewal even in the static state of epithelial cells and participate in the formation and maintenance of normal epithelial architecture and tumor suppression. CADM1 is a tumor suppressor belonging to the immunoglobulin superfamily of cell adhesion molecule and forms a cell adhesion complex with an actin-binding protein, 4.1B, and a scaffold protein, MPP3, in the cytoplasm. Here, we investigate dynamic regulation of the CADM1-4.1B-MPP3 complex in mature cell adhesion by fluorescence recovery after photobleaching (FRAP) analysis. Traditional FRAP analysis were performed for relatively short period of around 10 min. Here, thanks to recent advances in the sensitive laser detector systems, we examine FRAP of CADM1 complex for longer period of 60 min and analyze the recovery with exponential curve-fitting to distinguish the fractions with different diffusion constants. This approach reveals that the fluorescence recovery of CADM1 is fitted to a single exponential function with a time constant (τ) of approximately 16 min, whereas 4.1B and MPP3 are fitted to a double exponential function with two τs of approximately 40-60 sec and 16 min. The longer τ is similar to that of CADM1, suggesting that 4.1B and MPP3 have two distinct fractions, one forming a complex with CADM1 and the other present as a free pool. Fluorescence loss in photobleaching analysis supports the presence of a free pool of these proteins near the plasma membrane. Furthermore, double exponential fitting makes it possible to estimate the ratio of 4.1B and MPP3 present as a free pool and as a complex with CADM1 as approximately 3:2 and 3:1, respectively. Our analyses reveal a central role of CADM1 in stabilizing the complex with 4.1B and MPP3 and provide insight in the dynamics of adhesion complex formation.

  2. What is the best predictor of mortality in perforated peptic ulcer disease? A population-based, multivariable regression analysis including three clinical scoring systems.

    Science.gov (United States)

    Thorsen, Kenneth; Søreide, Jon Arne; Søreide, Kjetil

    2014-07-01

    Mortality rates in perforated peptic ulcer (PPU) have remained unchanged. The aim of this study was to compare known clinical factors and three scoring systems (American Society of Anesthesiologists (ASA), Boey and peptic ulcer perforation (PULP)) in the ability to predict mortality in PPU. This is a consecutive, observational cohort study of patients surgically treated for perforated peptic ulcer over a decade (January 2001 through December 2010). Primary outcome was 30-day mortality. A total of 172 patients were included, of whom 28 (16 %) died within 30 days. Among the factors associated with mortality, the PULP score had an odds ratio (OR) of 18.6 and the ASA score had an OR of 11.6, both with an area under the curve (AUC) of 0.79. The Boey score had an OR of 5.0 and an AUC of 0.75. Hypoalbuminaemia alone (≤37 g/l) achieved an OR of 8.7 and an AUC of 0.78. In multivariable regression, mortality was best predicted by a combination of increasing age, presence of active cancer and delay from admission to surgery of >24 h, together with hypoalbuminaemia, hyperbilirubinaemia and increased creatinine values, for a model AUC of 0.89. Six clinical factors predicted 30-day mortality better than available risk scores. Hypoalbuminaemia was the strongest single predictor of mortality and may be included for improved risk estimation.

  3. Cosmological parameter analysis including SDSS Lyα forest and galaxy bias: Constraints on the primordial spectrum of fluctuations, neutrino mass, and dark energy

    International Nuclear Information System (INIS)

    Seljak, Uros; Makarov, Alexey; McDonald, Patrick; Anderson, Scott F.; Bahcall, Neta A.; Cen, Renyue; Gunn, James E.; Lupton, Robert H.; Schlegel, David J.; Brinkmann, J.; Burles, Scott; Doi, Mamoru; Ivezic, Zeljko; Kent, Stephen; Loveday, Jon; Munn, Jeffrey A.; Nichol, Robert C.; Ostriker, Jeremiah P.; Schneider, Donald P.; Berk, Daniel E. Vanden

    2005-01-01

    We combine the constraints from the recent Lyα forest analysis of the Sloan Digital Sky Survey (SDSS) and the SDSS galaxy bias analysis with previous constraints from SDSS galaxy clustering, the latest supernovae, and 1st year WMAP cosmic microwave background anisotropies. We find significant improvements on all of the cosmological parameters compared to previous constraints, which highlights the importance of combining Lyα forest constraints with other probes. Combining WMAP and the Lyα forest we find for the primordial slope n s =0.98±0.02. We see no evidence of running, dn/dlnk=-0.003±0.010, a factor of 3 improvement over previous constraints. We also find no evidence of tensors, r 2 model is within the 2-sigma contour, V∝φ 4 is outside the 3-sigma contour. For the amplitude we find σ 8 =0.90±0.03 from the Lyα forest and WMAP alone. We find no evidence of neutrino mass: for the case of 3 massive neutrino families with an inflationary prior, eV and the mass of lightest neutrino is m 1 ν λ =0.72±0.02, w(z=0.3)=-0.98 -0.12 +0.10 , the latter changing to w(z=0.3)=-0.92 -0.10 +0.09 if tensors are allowed. We find no evidence for variation of the equation of state with redshift, w(z=1)=-1.03 -0.28 +0.21 . These results rely on the current understanding of the Lyα forest and other probes, which need to be explored further both observationally and theoretically, but extensive tests reveal no evidence of inconsistency among different data sets used here

  4. Included or Excluded: An Analysis of the Application of the Free, Prior and Informed Consent Principle in Land Grabbing Cases in Cameroon

    Directory of Open Access Journals (Sweden)

    Jean-Claude N Ashukem

    2016-09-01

    Full Text Available Even though the principle of free, prior and informed consent (FPIC is soft law, the need to respect, protect and fulfil the rights to be informed and to be involved in development projects is strongly backed in international legal instruments including inter alia the ILO Convention 169 Concerning Indigenous and Tribal People in Independent Countries (1998 and the UN Declaration on the Rights of Indigenous and Tribal People (2007. These instruments do not only appear to be the most comprehensive and advanced international legal instruments that deal with indigenous peoples' rights in terms of the FPIC, but also signal an addition to the growing body of international human rights law that serves to ensure the realisation and protection of the substantive environmental and other human rights of indigenous people, particularly in the context of land grabbing activities that have the potential to negatively impact on their rights. Such rights include, for example, the rights to be informed and to participate in decision-making processes with respect to development projects, including land grabbing activities. This implies an obligation on states party to such international agreements to ensure that indigenous people are informed about and are actively involved in both the negotiation and the implementation of land grabbing deals. However, because the latter often takes place against the background of non-transparent transactions which are inimical to the rights and interests of indigenous people, one may wonder why the principle of FPIC is not applicable during land grabbing transactions. Focusing on Cameroon, this article examines instances of land grabbing in the country in order to support this hypothesis. This is done by focusing specifically on the application of the principle of FPIC. The arguments in the article are inspired by international law in which the application of the principle in the context of land grabbing serves not only to

  5. Second-sphere complexation of thorium(IV) by cucurbit[6]uril with included perrhenate counterions. Crystal structure and Hirshfeld surface analysis

    Energy Technology Data Exchange (ETDEWEB)

    Thuery, Pierre [CEA, IRAMIS, UMR 3685 NIMBE, Laboratoire de Chimie Moleculaire et Catalyse pour l' Energie (LCMCE), Gif-sur-Yvette (France)

    2015-04-15

    The reaction of thorium(IV) nitrate with cucurbit[6]uril (CB6) in the presence of perrhenic acid in water gives the complex [Th(NO{sub 3})(H{sub 2}O){sub 8}][(ReO{sub 4})(CB6)](ReO{sub 4}){sub 2}.3H{sub 2}O (1). Aquated cations are held at both CB6 portals by ion-dipole and hydrogen-bonding interactions, and one of the ReO{sub 4}{sup -} anions is included in the CB6 cavity. The packing displays columns of alternate cations and encapsulated anions. Hirshfeld surfaces are used to visualize short contacts between the species present. (Copyright copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  6. Genotypic and Antimicrobial Susceptibility of Carbapenem-Resistant Acinetobacter baumannii: Analysis of ISAba Elements and blaOXA-23-like Genes Including A New Variant

    Directory of Open Access Journals (Sweden)

    Abbas eBahador

    2015-11-01

    Full Text Available Carbapenem-resistant Acinetobacter baumannii (CR-AB causes serious nosocomial infections, especially in ICU wards of hospitals, worldwide. Expression of blaOXA genes is the chief mechanism of conferring carbapenem resistance among CR-AB. Although some blaOXA genes have been studied among CR-AB isolates from Iran, their blaOXA-23-like genes have not been investigated. We used a multiplex-PCR to detect Ambler class A, B, and D carbapenemases of 85 isolates, and determined that 34 harbored blaOXA-23-like genes. Amplified fragment length polymorphism (AFLP genotyping, followed by DNA sequencing of blaOXA-23-like amplicons of CR-AB from each AFLP group was used to characterize their blaOXA-23-like genes. We also assessed the antimicrobial susceptibility pattern of CR-AB isolates, and tested whether they harbored insertion sequences ISAba1 and ISAba4. Sequence comparison with reference strain A. baumannii (NCTC12156 revealed five types of mutations in blaOXA-23-like genes; including one novel variant and four mutants that were already reported from China and the USA. All of the blaOXA-23-like genes mutations were associated with increased minimum inhibitory concentrations (MICs against imipenem. ISAba1 and ISAba4 sequences were detected upstream of blaOXA-23 genes in 19% and 7% of isolates, respectively. The isolation of CR-AB with new blaOXA-23 mutations including some that have been reported from the USA and China highlights CR-AB pervasive distribution, which underscores the importance of concerted national and global efforts to control the spread of CR-AB isolates worldwide.

  7. Characterization of Vibrio cholerae O1 El Tor Biotype Variant Clinical Isolates from Bangladesh and Haiti, Including a Molecular Genetic Analysis of Virulence Genes ▿

    Science.gov (United States)

    Son, Mike S.; Megli, Christina J.; Kovacikova, Gabriela; Qadri, Firdausi; Taylor, Ronald K.

    2011-01-01

    Vibrio cholerae serogroup O1, the causative agent of the diarrheal disease cholera, is divided into two biotypes: classical and El Tor. Both biotypes produce the major virulence factors toxin-coregulated pilus (TCP) and cholera toxin (CT). Although possessing genotypic and phenotypic differences, El Tor biotype strains displaying classical biotype traits have been reported and subsequently were dubbed El Tor variants. Of particular interest are reports of El Tor variants that produce various levels of CT, including levels typical of classical biotype strains. Here, we report the characterization of 10 clinical isolates from the International Centre for Diarrhoeal Disease Research, Bangladesh, and a representative strain from the 2010 Haiti cholera outbreak. We observed that all 11 strains produced increased CT (2- to 10-fold) compared to that of wild-type El Tor strains under in vitro inducing conditions, but they possessed various TcpA and ToxT expression profiles. Particularly, El Tor variant MQ1795, which produced the highest level of CT and very high levels of TcpA and ToxT, demonstrated hypervirulence compared to the virulence of El Tor wild-type strains in the infant mouse cholera model. Additional genotypic and phenotypic tests were conducted to characterize the variants, including an assessment of biotype-distinguishing characteristics. Notably, the sequencing of ctxB in some El Tor variants revealed two copies of classical ctxB, one per chromosome, contrary to previous reports that located ctxAB only on the large chromosome of El Tor biotype strains. PMID:21880975

  8. Efficacy and tolerability of renzapride in irritable bowel syndrome: a meta-analysis of randomized, controlled clinical trials including 2528 patients.

    Science.gov (United States)

    Mozaffari, Shilan; Nikfar, Shekoufeh; Abdollahi, Mohammad

    2014-02-24

    By targeting different subtypes of 5-hydroxytryptamine (5HT) receptors in the gastrointestinal (GI) tract, several drugs have been introduced for the management of irritable bowel syndrome (IBS). Renzapride is a full agonist for 5HT4 receptor and an antagonist to 5HT2b and 5HT3 receptors which is thought a promising therapeutic agent for constipation predominant IBS (C-IBS) patients due to its accelerating effect on the GI tract. In this meta-analysis, our aim was to evaluate the efficacy and tolerability of renzapride in the management of IBS. A search was done from 1992 to February 2013 for placebo-controlled trials that investigated the efficacy of renzapride in IBS. Relative risk (RR) for clinical efficacy in IBS patients treated for 5 weeks or less comparing renzapride to placebo was 1.07 (95% CI = 0.89-1.29, p = 0.38). This value for IBS patients treated for more than 5 weeks was 1.04 (95% CI = 0.78-1.239, p = 0.77). The RR for clinical efficacy in IBS patients treated with renzapride (4 mg) for 5 weeks or less and more than 5 weeks in comparison to placebo was 1.2 (95% CI = 0.97-1.48, p = 0.1) and 1.16 (95% CI = 0.98-1.37, p = 0.08), respectively, which were statistically non-significant but clinically important. The analysis of tolerability demonstrated that amongst different reported adverse effects, renzapride caused diarrhea more than placebo (RR = 1.61 with a 95% CI = 1.16-2.24, p = 0.004). The RR for withdrawals from renzapride compared to placebo was 1.58 (95% CI = 1.26-2.07, p = 0.0007). Renzapride is not superior to placebo in relieving IBS symptoms and causes significant incidences of diarrhea and drop-outs due to adverse effects in treated patients vs. placebo. Thus, this medicine might be a cost burden to patients without providing good effectiveness.

  9. Probabilistic modelling of human exposure to intense sweeteners in Italian teenagers: validation and sensitivity analysis of a probabilistic model including indicators of market share and brand loyalty.

    Science.gov (United States)

    Arcella, D; Soggiu, M E; Leclercq, C

    2003-10-01

    For the assessment of exposure to food-borne chemicals, the most commonly used methods in the European Union follow a deterministic approach based on conservative assumptions. Over the past few years, to get a more realistic view of exposure to food chemicals, risk managers are getting more interested in the probabilistic approach. Within the EU-funded 'Monte Carlo' project, a stochastic model of exposure to chemical substances from the diet and a computer software program were developed. The aim of this paper was to validate the model with respect to the intake of saccharin from table-top sweeteners and cyclamate from soft drinks by Italian teenagers with the use of the software and to evaluate the impact of the inclusion/exclusion of indicators on market share and brand loyalty through a sensitivity analysis. Data on food consumption and the concentration of sweeteners were collected. A food frequency questionnaire aimed at identifying females who were high consumers of sugar-free soft drinks and/or of table top sweeteners was filled in by 3982 teenagers living in the District of Rome. Moreover, 362 subjects participated in a detailed food survey by recording, at brand level, all foods and beverages ingested over 12 days. Producers were asked to provide the intense sweeteners' concentration of sugar-free products. Results showed that consumer behaviour with respect to brands has an impact on exposure assessments. Only probabilistic models that took into account indicators of market share and brand loyalty met the validation criteria.

  10. EPR spectroscopy of MRI-related Gd(III) complexes: simultaneous analysis of multiple frequency and temperature spectra, including static and transient crystal field effects.

    Science.gov (United States)

    Rast, S; Borel, A; Helm, L; Belorizky, E; Fries, P H; Merbach, A E

    2001-03-21

    For the first time, a very general theoretical method is proposed to interpret the full electron paramagnetic resonance (EPR) spectra at multiple temperatures and frequencies in the important case of S-state metal ions complexed in liquid solution. This method is illustrated by a careful analysis of the measured spectra of two Gd3+ (S = 7/2) complexes. It is shown that the electronic relaxation mechanisms at the origin of the EPR line shape arise from the combined effects of the modulation of the static crystal field by the random Brownian rotation of the complex and of the transient zero-field splitting. A detailed study of the static crystal field mechanism shows that, contrarily to the usual global models involving only second-order terms, the fourth and sixth order terms can play a non-negligible role. The obtained parameters are well interpreted in the framework of the physics of the various underlying relaxation processes. A better understanding of these mechanisms is highly valuable since they partly control the efficiency of paramagnetic metal ions in contrast agents for medical magnetic resonance imaging (MRI).

  11. Performance analysis on borehole energy storage system including utilization of solar thermal and photovoltaic energies; Taiyonetsu hikari riyo wo fukumu borehole energy chozo system no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Saito, T. [Tohoku University, Sendai (Japan); Yamaguchi, A. [Matsushita Electric Co. Ltd., Osaka (Japan)

    1996-10-27

    A permanent borehole energy storage system utilizing solar energy and waste heat from coolers is simulated, to be used as an air conditioning system for super-tall buildings. A 100m-long pipe is buried vertically into the ground, and a heat medium is caused to circulate in the pipe for the exchange of heat with the soil. Thirty borehole units are used, each measuring 9m{times}9m (with the pipe pitch being 3m). Solar cells occupying half of the wall surface facing south and solar collectors installed on the roof supply electric power and heat for cooling and warming. Heat in the ground is transferred mainly by conduction but also is carried by water and gas in movement. So, an analysis is carried out using an equation in which heat and water move at the same time. Because waste heat from cooling and warming systems is accumulated in the ground and none is discharged into the air, big cities will be protected from warming (from developing heat islands). As compared with the conventional boiler-aided air conditioning system, a hybrid borehole system incorporating solar collectors and solar cells will bring about an 80% reduction in CO2 emission and annual energy consumption. 7 refs., 3 figs., 4 tabs.

  12. Effectiveness of interventions on physical activity in overweight or obese children: a systematic review and meta-analysis including studies with objectively measured outcomes.

    Science.gov (United States)

    Nooijen, C F J; Galanti, M R; Engström, K; Möller, J; Forsell, Y

    2017-02-01

    There is no consensus on interventions to be recommended in order to promote physical activity among overweight or obese children. The objective of this review was to assess the effects on objectively measured physical activity, of interventions promoting physical activity among overweight or obese children or adolescents, compared to no intervention or to interventions without a physical activity component. Publications up to December 2015 were located through electronic searches for randomized controlled trials resulting in inclusion of 33 studies. Standardized mean differences from baseline to post-intervention and to long-term follow-up were determined for intervention and control groups and meta-analysed using random effects models. The meta-analysis showed that interventions had no effect on total physical activity of overweight and obese children, neither directly post-intervention (-0.02 [-0.15, 0.11]) nor at long-term follow-up (0.07 [-0.27, 0.40]). Separate analyses by typology of intervention (with or without physical fitness, behavioural or environmental components) showed similar results (no effect). In conclusion, there is no evidence that currently available interventions are able to increase physical activity among overweight or obese children. This questions the contribution of physical activity to the treatment of overweight and obesity in children in the studied interventions and calls for other treatment strategies. © 2017 World Obesity Federation.

  13. THE GREEN BANK TELESCOPE 350 MHz DRIFT-SCAN SURVEY II: DATA ANALYSIS AND THE TIMING OF 10 NEW PULSARS, INCLUDING A RELATIVISTIC BINARY

    Energy Technology Data Exchange (ETDEWEB)

    Lynch, Ryan S.; Kaspi, Victoria M.; Archibald, Anne M.; Karako-Argaman, Chen [Department of Physics, McGill University, 3600 University Street, Montreal, QC H3A 2T8 (Canada); Boyles, Jason; Lorimer, Duncan R.; McLaughlin, Maura A.; Cardoso, Rogerio F. [Department of Physics, West Virginia University, 111 White Hall, Morgantown, WV 26506 (United States); Ransom, Scott M. [National Radio Astronomy Observatory, 520 Edgemont Road, Charlottesville, VA 22903 (United States); Stairs, Ingrid H.; Berndsen, Aaron; Cherry, Angus; McPhee, Christie A. [Department of Physics and Astronomy, University of British Columbia, 6224 Agricultural Road, Vancouver, BC V6T 1Z1 (Canada); Hessels, Jason W. T.; Kondratiev, Vladislav I.; Van Leeuwen, Joeri [ASTRON, The Netherlands Institute for Radio Astronomy, Postbus 2, 7990-AA Dwingeloo (Netherlands); Epstein, Courtney R. [Department of Astronomy, Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Pennucci, Tim [Department of Astronomy, University of Virginia, P.O. Box 400325, Charlottesville, VA 22904 (United States); Roberts, Mallory S. E. [Eureka Scientific Inc., 2452 Delmer Street, Suite 100, Oakland, CA 94602 (United States); Stovall, Kevin, E-mail: rlynch@physics.mcgill.ca [Center for Advanced Radio Astronomy and Department of Physics and Astronomy, University of Texas at Brownsville, Brownsville, TX 78520 (United States)

    2013-02-15

    We have completed a 350 MHz Drift-scan Survey using the Robert C. Byrd Green Bank Telescope with the goal of finding new radio pulsars, especially millisecond pulsars that can be timed to high precision. This survey covered {approx}10,300 deg{sup 2} and all of the data have now been fully processed. We have discovered a total of 31 new pulsars, 7 of which are recycled pulsars. A companion paper by Boyles et al. describes the survey strategy, sky coverage, and instrumental setup, and presents timing solutions for the first 13 pulsars. Here we describe the data analysis pipeline, survey sensitivity, and follow-up observations of new pulsars, and present timing solutions for 10 other pulsars. We highlight several sources-two interesting nulling pulsars, an isolated millisecond pulsar with a measurement of proper motion, and a partially recycled pulsar, PSR J0348+0432, which has a white dwarf companion in a relativistic orbit. PSR J0348+0432 will enable unprecedented tests of theories of gravity.

  14. Analysis of a Free Surface Film from a Controlled Liquid Impinging Jet over a Rotating Disk Including Conjugate Effects, with and without Evaporation

    Science.gov (United States)

    Sankaran, Subramanian (Technical Monitor); Rice, Jeremy; Faghri, Amir; Cetegen, Baki M.

    2005-01-01

    A detailed analysis of the liquid film characteristics and the accompanying heat transfer of a free surface controlled liquid impinging jet onto a rotating disk are presented. The computations were run on a two-dimensional axi-symmetric Eulerian mesh while the free surface was calculated with the volume of fluid method. Flow rates between 3 and 15 1pm with rotational speeds between 50 and 200 rpm are analyzed. The effects of inlet temperature on the film thickness and heat transfer are characterized as well as evaporative effects. The conjugate heating effect is modeled, and was found to effect the heat transfer results the most at both the inner and outer edges of the heated surface. The heat transfer was enhanced with both increasing flow rate and increasing rotational speeds. When evaporative effects were modeled, the evaporation was found to increase the heat transfer at the lower flow rates the most because of a fully developed thermal field that was achieved. The evaporative effects did not significantly enhance the heat transfer at the higher flow rates.

  15. Nonlinear Dynamic Analysis of an Inclined Timoshenko Beam Subjected to a Moving Mass/Force with Beam’s Weight Included

    Directory of Open Access Journals (Sweden)

    Ahmad Mamandi

    2011-01-01

    Full Text Available In this study, the nonlinear vibrations analysis of an inclined pinned-pinned self-weight Timoshenko beam made of linear, homogenous and isotropic material with a constant cross section and finite length subjected to a traveling mass/force with constant velocity is investigated. The nonlinear coupled partial differential equations of motion for the rotation of warped cross section, longitudinal and transverse displacements are derived using the Hamilton's principle. These nonlinear coupled PDEs are solved by applying the Galerkin's method to obtain dynamic responses of the beam. The dynamic magnification factor and normalized time histories of mid-point of the beam are obtained for various load velocity ratios and the outcome results have been compared to the results with those obtained from linear solution. The influence of the large deflections caused by a stretching effect due to the beam's fixed ends is captured. It was seen that existence of quadratic-cubic nonlinear terms in the nonlinear governing coupled PDEs of motion causes stiffening (hardening behavior of the dynamic responses of the self-weight beam under the act of a traveling mass as well as equivalent concentrated moving force. Furthermore, in a case where the object leaves the beam, its planar motion path is derived and the targeting accuracy is investigated and compared with those from the rigid solution assumption.

  16. Hematopoietic stem cell transplantation activity worldwide in 2012 and a SWOT analysis of the Worldwide Network for Blood and Marrow Transplantation Group including the global survey.

    Science.gov (United States)

    Niederwieser, D; Baldomero, H; Szer, J; Gratwohl, M; Aljurf, M; Atsuta, Y; Bouzas, L F; Confer, D; Greinix, H; Horowitz, M; Iida, M; Lipton, J; Mohty, M; Novitzky, N; Nunez, J; Passweg, J; Pasquini, M C; Kodera, Y; Apperley, J; Seber, A; Gratwohl, A

    2016-06-01

    Data on 68 146 hematopoietic stem cell transplants (HSCTs) (53% autologous and 47% allogeneic) gathered by 1566 teams from 77 countries and reported through their regional transplant organizations were analyzed by main indication, donor type and stem cell source for the year 2012. With transplant rates ranging from 0.1 to 1001 per 10 million inhabitants, more HSCTs were registered from unrelated 16 433 donors than related 15 493 donors. Grafts were collected from peripheral blood (66%), bone marrow (24%; mainly non-malignant disorders) and cord blood (10%). Compared with 2006, an increase of 46% total (57% allogeneic and 38% autologous) was observed. Growth was due to an increase in reporting teams (18%) and median transplant activity/team (from 38 to 48 HSCTs/team). An increase of 167% was noted in mismatched/haploidentical family HSCT. A Strengths, Weaknesses, Opportunities, Threats (SWOT) analysis revealed the global perspective of WBMT to be its major strength and identified potential to be the key professional body for patients and authorities. The limited data collection remains its major weakness and threat. In conclusion, global HSCT grows over the years without plateauing (allogeneic>autologous) and at different rates in the four World Health Organization regions. Major increases were observed in allogeneic, haploidentical HSCT and, to a lesser extent, in cord blood transplantation.

  17. Hematopoietic Stem Cell Transplantation Activity Worldwide in 2012 and a SWOT Analysis of the Worldwide Network for Blood and Marrow Transplantation Group (WBMT) including the global survey

    Science.gov (United States)

    Niederwieser, Dietger; Baldomero, Helen; Szer, Jeff; Gratwohl, Michael; Aljurf, Mahmoud; Atsuta, Yoshiko; Bouzas, Luis Fernando; Confer, Dennis; Greinix, Hildegard; Horowitz, Mary; Iida, Minako; Lipton, Jeff; Mohty, Mohamad; Novitzky, Nicolas; Nunez, José; Passweg, Jakob; Pasquini, Marcelo C.; Kodera, Yoshihisa; Apperley, Jane; Seber, Adriana; Gratwohl, Alois

    2016-01-01

    Data on 68,146 hematopoietic stem cell transplants (HSCT) (53% autologous and 47% allogeneic) gathered by 1566 teams from 77 countries and reported through their regional transplant organizations were analyzed by main indication, donor type and stem cell source for the year 2012. With transplant rates ranging from 0.1 to 1001 per 10 million inhabitants, more HSCT were registered from unrelated 16,433 than related 15,493 donors. Grafts were collected from peripheral blood (66%), bone marrow (24%; mainly non-malignant disorders) and cord blood (10%). Compared to 2006, an increase of 46% total (57% allogeneic and 38% autologous) was observed. Growth was due to an increase in reporting teams (18%) and median transplant activity/team (from 38 to 48 HSCT/team). An increase of 67% was noted in mismatched/haploidentical family HSCT. A SWOT analysis revealed the global perspective of WBMT to be its major strength and identified potential to be the key professional body for patients and authorities. The limited data collection remains its major weakness and threat. In conclusion, global HSCT grows over the years without plateauing (allogeneic>autologous) and at different rates in the four WHO regions. Major increases were observed in allogeneic, haploidentical HSCT and, to a lesser extent, in cord blood. PMID:26901703

  18. Andalusian Registry for Familial Adenomatous Polyposis: Analysis of patients included Registro Andaluz de la Poliposis Adenomatosa Familiar: Análisis de los pacientes incluidos

    Directory of Open Access Journals (Sweden)

    M. Garzón Benavides

    2010-11-01

    Full Text Available Objective: To evaluate the phenotype and genotype characteristic of patients included in the Andalusian Registry for familial adenomatous polyposis, the genotype/phenotype correlation and the impact of Registry in the frequency of colorectal cancer of registered. Material and methods: A descriptive study of 77 patients with FAP belonging to 33 families, included in a centralized database visited by the physicians of the hospitals taking part in the present study, on prior signing of confidentiality letters. All genetic studies were carried out in the Immunology Service of our institution. Results: We have included in our study 77 patients of 33 families; 31 probands with a mean age of 32 years (13-51 and 46 relatives at risk with a mean age of 21.8 years (6-55. Genetic study informed in 68/77 with positive result in 92.6%. Ten probands showed colorectal cancer (CRC at the time of diagnosis (32.2%. Only two affected relatives showed CRC at diagnosis (4.3%, a statistically significant difference (p Objetivos: Valorar las características fenotípicas y genotípicas de los pacientes incluidos en el Registro Andaluz de la poliposis adenomatosa familiar, la relación genotipo/fenotipo y el impacto del Registro en la frecuencia de cáncer colorrectal de los familiares registrados. Material y métodos: Estudio descriptivo de 77 pacientes con PAF, pertenecientes a 33 familias, incluidos en una base de datos centralizada a la que tienen acceso los responsables de los hospitales participantes, previa firma de cartas de confidencialidad. Todos los estudios genéticos se realizan en el Servicio de Inmunología de nuestro Hospital. Resultados: 77 pacientes registrados (50,6% varones: 31 probandos, edad media: 32 años (13-51 y 46 familiares afectos, edad media 21,8 años (6-55. Estudio genético informado en 68/77 con resultado positivo en 92,6%. Cáncer colorrectal al diagnóstico en diez probandos (32,2% y 2 familiares afectos (4,3%, diferencia estad

  19. DNA copy number analysis of Grade II-III and Grade IV gliomas reveals differences in molecular ontogeny including chromothripsis associated with IDH mutation status.

    Science.gov (United States)

    Cohen, Adam; Sato, Mariko; Aldape, Kenneth; Mason, Clinton C; Alfaro-Munoz, Kristin; Heathcock, Lindsey; South, Sarah T; Abegglen, Lisa M; Schiffman, Joshua D; Colman, Howard

    2015-06-20

    Isocitrate dehydrogenase (IDH) mutation status and grade define subgroups of diffuse gliomas differing based on age, tumor location, presentation, and prognosis. While some biologic differences between IDH mutated (IDH (mut)) and wild-type (IDH (wt)) gliomas are clear, the distinct alterations associated with progression of the two subtypes to glioblastoma (GBM, Grade IV) have not been well described. We analyzed copy number alterations (CNAs) across grades (Grade II-III and GBM) in both IDH (mut) and IDH (wt) infiltrating gliomas using molecular inversion probe arrays. Ninety four patient samples were divided into four groups: Grade II-III IDH (wt) (n = 17), Grade II-III IDH (mut) (n = 28), GBM IDH (wt) (n = 25), and GBM IDH (mut) (n = 24). We validated prior observations that IDH (wt) GBM have a high frequency of chromosome 7 gain (including EGFR) and chromosome 10 loss (including PTEN) compared with IDH (mut) GBM. Hierarchical clustering of IDH (mut) gliomas demonstrated distinct CNA patterns distinguishing lower grade gliomas versus GBM. However, similar hierarchical clustering of IDH (wt) gliomas demonstrated no CNA distinction between lower grade glioma and GBM. Functional analyses showed that IDH (wt) gliomas had more chromosome gains in regions containing receptor tyrosine kinase pathways. In contrast, IDH (mut) gliomas more commonly demonstrated amplification of cyclins and cyclin dependent kinase genes. One of the most common alterations associated with transformation of lower grade to GBM IDH (mut) gliomas was the loss of chromosomal regions surrounding PTEN. IDH (mut) GBM tumors demonstrated significantly higher levels of overall CNAs compared to lower grade IDH (mut) tumors and all grades of IDH (wt) tumors, and IDH (mut) GBMs also demonstrated significant increase in incidence of chromothripsis. Taken together, these analyses demonstrate distinct molecular ontogeny between IDH (wt) and IDH (mut) gliomas. Our data also support the novel

  20. Percutaneous Image-Guided Screw Fixation of Bone Lesions in Cancer Patients: Double-Centre Analysis of Outcomes including Local Evolution of the Treated Focus

    Energy Technology Data Exchange (ETDEWEB)

    Cazzato, Roberto Luigi, E-mail: gigicazzato@hotmail.it; Koch, Guillaume, E-mail: guillaume.koch@chru-strasbourg.fr [Hôpitaux Universitaires de Strasbourg, HUS, Department of Interventional Radiology, Nouvel Hôpital Civil (France); Buy, Xavier, E-mail: x.buy@bordeaux.unicancer.fr [Institut Bergonié, Department of Radiology (France); Ramamurthy, Nitin, E-mail: nitin-ramamurthy@hotmail.com [Norfolk and Norwich University Hospital, Department of Radiology (United Kingdom); Tsoumakidou, Georgia, E-mail: georgia.tsoumakidou@chru-strasbourg.fr; Caudrelier, Jean, E-mail: jean.caudrelier@chru-strasbourg.fr [Hôpitaux Universitaires de Strasbourg, HUS, Department of Interventional Radiology, Nouvel Hôpital Civil (France); Catena, Vittorio, E-mail: v.catena@bordeaux.unicancer.fr [Institut Bergonié, Department of Radiology (France); Garnon, Julien, E-mail: juleiengarnon@gmail.com [Hôpitaux Universitaires de Strasbourg, HUS, Department of Interventional Radiology, Nouvel Hôpital Civil (France); Palussiere, Jean, E-mail: j.palussiere@bordeaux.unicancer.fr [Institut Bergonié, Department of Radiology (France); Gangi, Afshin, E-mail: gangi@unistra.fr [Hôpitaux Universitaires de Strasbourg, HUS, Department of Interventional Radiology, Nouvel Hôpital Civil (France)

    2016-10-15

    AimTo review outcomes and local evolution of treated lesions following percutaneous image-guided screw fixation (PIGSF) of pathological/insufficiency fractures (PF/InF) and impeding fractures (ImF) in cancer patients at two tertiary centres.Materials and methodsThirty-two consecutive patients (mean age 67.5 years; range 33–86 years) with a range of tumours and prognoses underwent PIGSF for non/minimally displaced PF/InF and ImF. Screws were placed under CT/fluoroscopy or cone-beam CT guidance, with or without cementoplasty. Clinical outcomes were assessed using a simple 4-point scale (1 = worse; 2 = stable; 3 = improved; 4 = significantly improved). Local evolution was reviewed on most recent follow-up imaging. Technical success, complications, and overall survival were evaluated.ResultsThirty-six lesions were treated with 74 screws mainly in the pelvis and femoral neck (58.2 %); including 47.2 % PF, 13.9 % InF, and 38.9 % ImF. Cementoplasty was performed in 63.9 % of the cases. Technical success was 91.6 %. Hospital stay was ≤3 days; 87.1 % of lesions were improved at 1-month follow-up; three major complications (early screw-impingement radiculopathy; accelerated coxarthrosis; late coxofemoral septic arthritis) and one minor complication were observed. Unfavourable local evolution at imaging occurred in 3/24 lesions (12.5 %) at mean 8.7-month follow-up, including poor consolidation (one case) and screw loosening (two cases, at least 1 symptomatic). There were no cases of secondary fractures.ConclusionsPIGSF is feasible for a wide range of oncologic patients, offering good short-term efficacy, acceptable complication rates, and rapid recovery. Unfavourable local evolution at imaging may be relatively frequent, and requires close clinico-radiological surveillance.

  1. Report of two cases of pseudoprogression in patients with non-small cell lung cancer treated with nivolumab-including histological analysis of one case after tumor regression.

    Science.gov (United States)

    Tanizaki, Junko; Hayashi, Hidetoshi; Kimura, Masatomo; Tanaka, Kaoru; Takeda, Masayuki; Shimizu, Shigeki; Ito, Akihiko; Nakagawa, Kazuhiko

    2016-12-01

    The recent approval of nivolumab and other immune-checkpoint inhibitors for the treatment of certain solid tumors including non-small cell lung cancer (NSCLC) has transformed cancer therapy. However, it will be important to characterize effects of such agents not seen with classical cytotoxic drugs or other targeted therapeutics. We here report two cases of NSCLC showing so-called pseudoprogression during nivolumab treatment. In both cases, imaging assessment revealed that liver metastatic lesions initially progressed but subsequently shrank during continuous nivolumab administration, with treatment also resulting in a decline in serum levels of carcinoembryonic antigen. Histological evaluation of the liver metastatic lesion of one case after regression revealed fibrotic tissue containing infiltrated lymphocytes positive for CD3, CD4, or CD8 but no viable tumor cells, suggestive of a durable immune reaction even after a pathological complete response. Given the increasing use of immune-checkpoint inhibitors in patients with NSCLC or other solid tumors, further clinical evaluation and pathological assessment are warranted to provide a better understanding of such pseudoprogression. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  2. Audit of Trichomonas vaginalis test requesting by community referrers after a change from culture to molecular testing, including a cost analysis.

    Science.gov (United States)

    Bissessor, Liselle; Wilson, Janet; McAuliffe, Gary; Upton, Arlo

    2017-06-16

    Trichomonas vaginalis (TV) prevalence varies among different communities and peoples. The availability of robust molecular platforms for the detection of TV has advanced diagnosis; however, molecular tests are more costly than phenotypic methodologies, and testing all urogenital samples is costly. We recently replaced culture methods with the Aptima Trichomonas vaginalis nucleic acid amplification test on specific request and as reflex testing by the laboratory, and have audited this change. Data were collected from August 2015 (microbroth culture and microscopy) and August 2016 (Aptima TV assay) including referrer, testing volumes, results and test cost estimates. In August 2015, 10,299 vaginal swabs, and in August 2016, 2,189 specimens (urogenital swabs and urines), were tested. The positivity rate went from 0.9% to 5.3%, and overall more TV infections were detected in 2016. The number needed to test and cost for one positive TV result respectively was 111 and $902.55 in 2015, and 19 and $368.92 in 2016. Request volumes and positivity rates differed among referrers. The methodology change was associated with higher overall detection of TV, and reductions in the numbers needed to test/cost for one TV diagnosis. Our audit suggests that there is room for improvement with TV test requesting in our community.

  3. Including land cover change in analysis of greenness trends using all available Landsat 5, 7, and 8 images: A case study from Guangzhou, China (2000–2014)

    Science.gov (United States)

    Zhu, Zhe; Fu, Yingchun; Woodcock, Curtis; Olofsson, Pontus; Vogelmann, James; Holden, Christopher; Wang, Min; Dai, Shu; Yu, Yang

    2016-01-01

    Remote sensing has proven a useful way of evaluating long-term trends in vegetation “greenness” through the use of vegetation indices like Normalized Differences Vegetation Index (NDVI) and Enhanced Vegetation Index (EVI). In particular, analyses of greenness trends have been performed for large areas (continents, for example) in an attempt to understand vegetation response to climate. These studies have been most often used coarse resolution sensors like Moderate Resolution Image Spectroradiometer (MODIS) and Advanced Very High Resolution Radiometer (AVHRR). However, trends in greenness are also important at more local scales, particularly in and around cities as vegetation offers a variety of valuable ecosystem services ranging from minimizing air pollution to mitigating urban heat island effects. To explore the ability to monitor greenness trends in and around cities, this paper presents a new way for analyzing greenness trends based on all available Landsat 5, 7, and 8 images and applies it to Guangzhou, China. This method is capable of including the effects of land cover change in the evaluation of greenness trends by separating the effects of abrupt and gradual changes, and providing information on the timing of greenness trends.

  4. Comparative efficacy and safety of the left versus right radial approach for percutaneous coronary procedures: a meta-analysis including 6870 patients

    Directory of Open Access Journals (Sweden)

    S.L. Xia

    2015-08-01

    Full Text Available The radial approach is widely used in the treatment of patients with coronary artery disease. We conducted a meta-analysis of published results on the efficacy and safety of the left and right radial approaches in patients undergoing percutaneous coronary procedures. A systematic search of reference databases was conducted, and data from 14 randomized controlled trials involving 6870 participants were analyzed. The left radial approach was associated with significant reductions in fluoroscopy time [standardized mean difference (SMD=-0.14, 95% confidence interval (CI=-0.19 to -0.09; P<0.00001] and contrast volume (SMD=-0.07, 95%CI=-0.12 to -0.02; P=0.009. There were no significant differences in rate of procedural failure of the left and the right radial approaches [risk ratios (RR=0.98; 95%CI=0.77-1.25; P=0.88] or procedural time (SMD=-0.05, 95%CI=0.17-0.06; P=0.38. Tortuosity of the subclavian artery (RR=0.27, 95%CI=0.14-0.50; P<0.0001 was reported more frequently with the right radial approach. A greater number of catheters were used with the left than with the right radial approach (SMD=0.25, 95%CI=0.04-0.46; P=0.02. We conclude that the left radial approach is as safe as the right radial approach, and that the left radial approach should be recommended for use in percutaneous coronary procedures, especially in percutaneous coronary angiograms.

  5. Cell culture isolation and sequence analysis of genetically diverse US porcine epidemic diarrhea virus strains including a novel strain with a large deletion in the spike gene.

    Science.gov (United States)

    Oka, Tomoichiro; Saif, Linda J; Marthaler, Douglas; Esseili, Malak A; Meulia, Tea; Lin, Chun-Ming; Vlasova, Anastasia N; Jung, Kwonil; Zhang, Yan; Wang, Qiuhong

    2014-10-10

    The highly contagious and deadly porcine epidemic diarrhea virus (PEDV) first appeared in the US in April 2013. Since then the virus has spread rapidly nationwide and to Canada and Mexico causing high mortality among nursing piglets and significant economic losses. Currently there are no efficacious preventive measures or therapeutic tools to control PEDV in the US. The isolation of PEDV in cell culture is the first step toward the development of an attenuated vaccine, to study the biology of PEDV and to develop in vitro PEDV immunoassays, inactivation assays and screen for PEDV antivirals. In this study, nine of 88 US PEDV strains were isolated successfully on Vero cells with supplemental trypsin and subjected to genomic sequence analysis. They differed genetically mainly in the N-terminal S protein region as follows: (1) strains (n=7) similar to the highly virulent US PEDV strains; (2) one similar to the reportedly US S INDEL PEDV strain; and (3) one novel strain most closely related to highly virulent US PEDV strains, but with a large (197aa) deletion in the S protein. Representative strains of these three genetic groups were passaged serially and grew to titers of ∼5-6log10 plaque forming units/mL. To our knowledge, this is the first report of the isolation in cell culture of an S INDEL PEDV strain and a PEDV strain with a large (197aa) deletion in the S protein. We also designed primer sets to detect these genetically diverse US PEDV strains. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Expression of IGF‐I, IGF‐II, and IGF‐IR in gallbladder carcinoma. A systematic analysis including primary and corresponding metastatic tumours

    Science.gov (United States)

    Kornprat, P; Rehak, P; Rüschoff, J; Langner, C

    2006-01-01

    Aims The insulin‐like growth factor (IGF) system has been implicated in tumour development and progression. This study was designed to analyse the expression of the IGF‐I receptor (IGF‐IR) and its ligands (IGF‐I, IGF‐II) in gallbladder cancer. Methods IGF‐I, IGF‐II, and IGF‐IR immunoreactivity was investigated in 57 gallbladder carcinomas and corresponding lymph node (n  =  11) and hepatic (n  =  7) metastases using a tissue microarray technique and correlated with tumour stage, grade, and patient outcome. Results Cancer tissue allowing a reliable evaluation of IGF‐I, IGF‐II, and IGF‐IR was present in 55 of 57 primary tumours and 17 of 18 metastases. IGF‐I and IGF‐II immunoreactivity was seen in 25 and 14 of the 55 primary tumours, in addition to six and three of the 17 metastases, respectively. No associations with tumour stage, grade, or prognosis were detected. IGF‐IR was expressed in 52 of 55 primary tumours and all 17 metastases. IGF‐IR staining intensity decreased with tumour cell dedifferentiation. Moreover, IGF‐IR expression in less than 50% of cancer cells was an independent marker of poor prognosis in multivariate analysis (risk ratio, 4.0; 95% confidence interval, 1.4 to 11.2; p  =  0.01). Conclusions The expression of IGF‐IR and its ligands provides evidence for the existence of an auto/paracrine loop of tumour cell stimulation in gallbladder cancer and makes this type of cancer a candidate for therapeutic strategies aimed at interfering with the IGF pathway. The recognition of IGF‐IR as a new independent prognostic biomarker may help to identify patients who might benefit from adjuvant treatment. PMID:16443739

  7. Presurgical localization of abnormal parathyroid glands using a single injection of technetium-99m methoxyisobutylisonitrile: comparison of different techniques including factor analysis of dynamic structures

    Energy Technology Data Exchange (ETDEWEB)

    Blocklet, D. [Hopital Universitaire Erasme, Univ. Libre de Bruxelles (Belgium); Martin, P. [Hopital Universitaire Brugmann, Univ. Libre de Bruxelles (Belgium); Schoutens, A. [Hopital Universitaire Erasme, Univ. Libre de Bruxelles (Belgium); Verhas, M. [Hopital Universitaire Brugmann, Univ. Libre de Bruxelles (Belgium); Hooghe, L. [Hopital Universitaire Brugmann, Univ. Libre de Bruxelles (Belgium); Kinnaert, P. [Hopital Universitaire Erasme, Univ. Libre de Bruxelles (Belgium)

    1997-01-01

    The aims of this study were to determine which of the analytical techniques described for this method time-activity curves analysis of dynamic structures corresponds best with surgical findings, and to ascertain the potential overall contribution of presurgical scintigraphy. 55P patients were studied, 34 of whom presented with primary hyperparathyroidism (HPT) and 21 with secondary HPT. After a 925 MBq injection of technetium-99m MIBI, a 40-min dynamic acquisition was performed and static images were acquired at 5, 20, 40 and 120 min using a gamma camera equipped with a pinhole collimator. Sensitivity was 84.4%, 74% and 65% in adenoma and 76%, 66.6% and 45% in hyperplasia for 15`-120`, FADS and TACs, respectively. Surgical accuracy was 72%, 56% and 59% in adenoma and 53%, 30% and 22% in hyperplasia for 15`-120`, FADS and TACs, respectively. The visual comparison method scored best in all cases. FADS was found to be sensitive in cases of adenoma but was handicapped by more false-positive localizations. TACs were particular inefficient in hyperplasia. With respect to the detection of adenomas, we found a relationship between the gland weight and scintigraphic positivity. This dependence was not found in hyperplasia. The poorer results obtained with all techniques for surgical accuracy can be explained by the need for a complete scintigraphic description of all pathological glands found by the surgeon in a patient. This study demonstrates that the 15`-120` visual comparison method is more efficient However, it was less efficient than neck exploration by an experienced surgeon. (orig./ vhe) (orig.). With 4 figs., 4 tabs.

  8. Personal behaviors including food consumption and mineral supplement use among Japanese adults: a secondary analysis from the National Health and Nutrition Survey, 2003-2010.

    Science.gov (United States)

    Sato, Yoko; Tsubota-Utsugi, Megumi; Chiba, Tsuyoshi; Tsuboyama-Kasaoka, Nobuyo; Takimoto, Hidemi; Nishi, Nobuo; Umegaki, Keizo

    2016-01-01

    A daily mineral supplement is useful for those who are at risk of a deficiency. Some Western reports suggest that mineral supplement users have healthy behaviors and are not mineral-deficient. It is unknown whether the same phenomenon is observed in Japan where there is a different dietary culture. The aim of this study was to examine the characteristics of personal behaviors including food consumption nationwide among mineral supplement users from the National Health and Nutrition Survey in Japan 2003-2010. Data were obtained from 16,275 adults aged 20-59 years who completed sociodemographic, health status, and 1-day household dietary assessments. Supplement users were compared with non-users. Logistic regression models were utilized to identify the characteristics of food consumption and calcium and iron supplement use, using the medium intake group as a reference. Overall, 2.1% and 1.4% of adults reported using calcium supplements and iron supplements, respectively. Calcium supplement users were more likely to be physically active, non-smokers, and eat less fat compared with non-users. Furthermore, they were more likely than non-users to consume a higher intake of calcium from foods such as tea, vegetables, seaweeds, and fruits. Iron supplement users were more likely than non-users to be non-smokers. These individuals tended to have a high intake of seaweeds and fruits. Japanese adults who had healthier behaviors were more likely to use mineral supplements, especially calcium. Mineral supplement users tended to choose healthy foods such as seaweeds and fruits, without considering their overall mineral consumption.

  9. [Experimental Approach to Analysis of the Relationship between Food Environments and Lifestyle-Related Diseases, Including Cardiac Hypertrophy, Fatty Liver, and Fatigue Symptoms].

    Science.gov (United States)

    Horiuchi, Masahisa; Nakakuma, Miwa; Arimura, Emi; Ushikai, Miharu; Yoshida, Goichiro

    2015-01-01

    The food habit is involved in the onset and development of lifestyle-related diseases. In this review I would like to describe a historical case of vitamin B1 deficiency, as well as our case study of fatty acid metabolism abnormality due to carnitine deficiency. In history, the army and navy personnel in Japan at the end of the 19th century received food rations based on a high-carbohydrate diet including white rice, resulting in the onset of beriberi. An epidemiological study by Kenkan Takaki revealed the relationship between the onset of beriberi and rice intake. Then, Takaki was successful in preventing the onset of beriberi by changing the diet. However, the primary cause had yet to be elucidated. Finally, Christian Eijkman established an animal model of beriberi (chickens) showing peripheral neuropathy, and he identified the existence of an anti-beriberi substance, vitamin B1. This is an example of the successful control of a disease by integrating the results of epidemiological and experimental studies. In our study using a murine model of fatty acid metabolism abnormality caused by carnitine deficiency, cardiac abnormality and fatty liver developed depending on the amount of dietary fat. In addition, the mice showed disturbance of orexin neuron activity related to the sleep-arousal system, which is involved in fatigue symptoms under fasting condition, one of the states showing enhanced fatty acid metabolism. These findings suggest that fatty acid toxicity is enhanced when the mice are more dependent on fatty acid metabolism. Almost simultaneously, a human epidemiological study showed that narcolepsy, which is caused by orexin system abnormality, is associated with the polymorphism of the gene coding for carnitine palmitoyltransferase 1B, which is involved in carnitine metabolism. To understand the pathological mechanism of fatty acid toxicity, not only an experimental approach using animal models, but also an epidemiological approach is necessary. The

  10. Retrospective analysis of factors associated with outcome of proximal interphalangeal joint arthrodesis in 82 horses including Warmblood and Thoroughbred sport horses and Quarter Horses (1992-2014).

    Science.gov (United States)

    Herthel, T D; Rick, M C; Judy, C E; Cohen, N D; Herthel, D J

    2016-09-01

    Outcomes associated with arthrodesis of the proximal interphalangeal (PIP) joint in Quarter Horses used for Western performance activities are well documented but little is known regarding outcomes for other types of horses. To identify factors associated with outcomes, including breed and activity, after arthrodesis of the PIP joint in Warmbloods, Thoroughbreds and Quarter Horses. Retrospective case series. Surgical case records of 82 Quarter Horses principally engaged in Western performance and Thoroughbred or Warmblood breeds principally engaged in showing, showjumping and dressage, with arthrodesis of the PIP joint were reviewed. Arthrodesis was performed with either 3 transarticular cortex bone screws placed in lag fashion, a dynamic compression plate (DCP) with 2 transarticular cortex bone screws placed in lag fashion, or a locking compression plate (LCP) with 2 transarticular cortex bone screws placed in lag fashion. Demographic data, clinical presentation, radiographic findings, surgical technique, post operative treatment and complications were recorded. Long-term follow-up was obtained for all 82 horses. Osteoarthritis of the PIP joint was the most common presenting condition requiring arthrodesis, which was performed with either the 3 screw technique (n = 41), DCP fixation (n = 22), or LCP fixation (n = 19). Post operatively, 23/31 (74%) Warmbloods/Thoroughbreds and 44/51 (87%) Quarter Horses achieved successful outcomes. Thirteen of 23 (57%) Warmbloods/Thoroughbreds and 24 of 38 (63%) Quarter Horses, used for athletic performance, returned to successful competition. Within this subgroup of horses engaged in high-level activity, regardless of breed type, horses undergoing hindlimb arthrodesis were significantly more likely to return to successful competition (73%; 33/45) than those with forelimb arthrodesis (25%; 4/16, P = 0.002). Arthrodesis of the PIP joint in Warmbloods/Thoroughbreds and Quarter Horses results in a favourable outcome for return to

  11. Analysis of the key elements of FFAT-like motifs identifies new proteins that potentially bind VAP on the ER, including two AKAPs and FAPP2.

    Directory of Open Access Journals (Sweden)

    Veronika Mikitova

    Full Text Available BACKGROUND: Two phenylalanines (FF in an acidic tract (FFAT-motifs were originally described as having seven elements: an acidic flanking region followed by 6 residues (EFFDA-E. Such motifs are found in several lipid transfer protein (LTP families, and they interact with a protein on the cytosolic face of the ER called vesicle-associated membrane protein-associated protein (VAP. Mutation of which causes ER stress and motor neuron disease, making it important to determine which proteins bind VAP. Among other proteins that bind VAP, some contain FFAT-like motifs that are missing one or more of the seven elements. Defining how much variation is tolerated in FFAT-like motifs is a preliminary step prior to the identification of the full range of VAP interactors. RESULTS: We used a quantifiable in vivo system that measured ER targeting in a reporter yeast strain that over-expressed VAP to study the effect of substituting different elements of FFAT-like motifs in turn. By defining FFAT-like motifs more widely than before, we found them in novel proteins the functions of which had not previously been directly linked to the ER, including: two PKA anchoring proteins, AKAP220 and AKAP110; a family of plant LTPs; and the glycolipid LTP phosphatidylinositol-four-phosphate adaptor-protein-2 (FAPP-2. CONCLUSION: All of the seven essential elements of a FFAT motif tolerate variation, and weak targeting to the ER via VAP is still detected if two elements are substituted. In addition to the strong FFAT motifs already known, there are additional proteins with weaker FFAT-like motifs, which might be functionally important VAP interactors.

  12. Parenteral nutrition including an omega-3 fatty-acid-containing lipid emulsion for intensive care patients in China: a pharmacoeconomic analysis

    Directory of Open Access Journals (Sweden)

    Feng Y

    2017-09-01

    Full Text Available Yufei Feng,1 Chao Li,1 Tian Zhang,1 Lorenzo Pradelli2 1Department of Pharmacy, Beijing Hospital, National Center of Gerontology, Beijing, People’s Republic of China; 2AdRes Health Economics and Outcomes Research, Piazza Carlo Emanuele II, Torino, Italy Background/objectives: Parenteral nutrition (PN incorporating omega-3 fatty-acid-enriched lipid emulsions has been shown to be cost effective in Western populations. A pharmacoeconomic evaluation was performed within the Chinese intensive care unit (ICU setting. This assessed whether the additional acquisition cost of PN with omega-3 fatty-acid-enriched lipid emulsion (SMOFlipid vs standard PN was offset by improved clinical outcomes that can reduce subsequent costs. Materials and methods: A pharmacoeconomic discrete event simulation model was developed, based on an update to efficacy data from a previous international meta-analysis, with China-specific clinical and economic input parameters. Sensitivity analyses were undertaken to assess the effects of uncertainty around input parameters. Results: The model predicted that PN with an omega-3 fatty-acid-enriched lipid emulsion was more effective and less costly than PN with standard lipid emulsions for Chinese ICU patients, as follows: reduced length of overall hospital length of stay (19.48 vs 21.35 days, respectively, reduced length of ICU stay (5.03 vs 6.18 days, respectively, and prevention of 35.6% of nosocomial infections leading to a lower total cost per patient (¥47 189 [US $6937] vs ¥54 783 [US $8053], respectively. Additional treatment costs were offset by savings in overall hospital and ICU stay cost, and antibiotic cost, resulting in a mean cost saving of ¥7594 (US $1116 per patient. Sensitivity analyses confirmed the robustness of these findings. Conclusions: PN enriched with an omega-3 fatty-acid-containing lipid emulsion vs standard PN may be effective in reducing length of hospital and ICU stay and infectious complications in

  13. Associative Flow Rule Used to Include Hydrostatic Stress Effects in Analysis of Strain-Rate-Dependent Deformation of Polymer Matrix Composites

    Science.gov (United States)

    Goldberg, Robert K.; Roberts, Gary D.

    2004-01-01

    designing reliable composite engine cases that are lighter than the metal cases in current use. The types of polymer matrix composites that are likely to be used in such an application have a deformation response that is nonlinear and that varies with strain rate. The nonlinearity and the strain-rate dependence of the composite response are due primarily to the matrix constituent. Therefore, in developing material models to be used in the design of impact-resistant composite engine cases, the deformation of the polymer matrix must be correctly analyzed. However, unlike in metals, the nonlinear response of polymers depends on the hydrostatic stresses, which must be accounted for within an analytical model. By applying micromechanics techniques along with given fiber properties, one can also determine the effects of the hydrostatic stresses in the polymer on the overall composite deformation response. First efforts to account for the hydrostatic stress effects in the composite deformation applied purely empirical methods that relied on composite-level data. In later efforts, to allow polymer properties to be characterized solely on the basis of polymer data, researchers at the NASA Glenn Research Center developed equations to model the polymers that were based on a non-associative flow rule, and efforts to use these equations to simulate the deformation of representative polymer materials were reasonably successful. However, these equations were found to have difficulty in correctly analyzing the multiaxial stress states found in the polymer matrix constituent of a composite material. To correct these difficulties, and to allow for the accurate simulation of the nonlinear strain-rate-dependent deformation analysis of polymer matrix composites, in the efforts reported here Glenn researchers reformulated the polymer constitutive equations from basic principles using the concept of an associative flow rule. These revised equations were characterized and validated in an

  14. The shorter the better? A follow-up analysis of 10-session psychiatric treatment including the motive-oriented therapeutic relationship for borderline personality disorder.

    Science.gov (United States)

    Kramer, Ueli; Stulz, Niklaus; Berthoud, Laurent; Caspar, Franz; Marquet, Pierre; Kolly, Stéphane; De Roten, Yves; Despland, Jean-Nicolas

    2017-05-01

    There is little research on short-term treatments for borderline personality disorder (BPD). While the core changes may occur only in long-term treatments, short-term treatments may enable the study of early generic processes of engagement in therapy and thus inform about effective treatment components. It was shown that a 10-session version of a psychiatric treatment was effective in reducing borderline symptoms at the end of this treatment [Kramer, U., Kolly, S., Berthoud, L., Keller, S., Preisig, M., Caspar, F., … Despland, J.-N. (2014). Effects of motive-oriented therapeutic relationship in a ten-session general psychiatric treatment for borderline personality disorder: A randomized controlled trial. Psychotherapy and Psychosomatics, 83, 176-186.]. Also, it was demonstrated in a randomized design that adding the motive-oriented therapeutic relationship (MOTR), following an individualized case formulation based on Plan Analysis, further increased general outcome after session 10 and had a positive effect on the early changes in self-esteem and alliance. The present study focuses on the follow-up period after this initial treatment, examining treatment density and outcomes after 6 months and service utilization after 12 months. Outcome was measured using the OQ-45. Results on a sub-sample of N = 40 patients with available OQ-45 data at follow-up (n = 21 for MOTR-treatment, n = 19 for comparison treatment) showed maintenance of gains over the follow-up period, which did not differ between both conditions. It appeared for this sample that MOTR treatments, while using the same number of sessions, lasted more weeks (i.e., lower treatment density, defined as the number of sessions per week), when compared to the treatments without MOTR. Density marginally predicted symptom reduction at follow-up. Patients in MOTR treatments had a greater likelihood of entering structured psychotherapy after the initial sessions than patients in the comparison

  15. Double-Stranded RNA Is Detected by Immunofluorescence Analysis in RNA and DNA Virus Infections, Including Those by Negative-Stranded RNA Viruses.

    Science.gov (United States)

    Son, Kyung-No; Liang, Zhiguo; Lipton, Howard L

    2015-09-01

    -stimulated genes. The present study demonstrates that infections, including those by ssDNA viruses and positive- and negative-strand RNA viruses, produce dsRNAs detectable by standard immunofluorescence staining. While dsRNA staining was primarily observed in the cytoplasm, nuclear staining was also present in some RNA and DNA virus infections. The nucleus is unlikely to have pathogen-associated molecular pattern (PAMP) receptors for dsRNA because of the presence of host dsRNA molecules. Thus, it is likely that most animal virus infections produce dsRNA species detectable by immunofluorescence staining, which may prove useful in viral discovery as well. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

  16. Nonlinear Progressive Collapse Analysis Including Distributed Plasticity

    Directory of Open Access Journals (Sweden)

    Mohamed Osama Ahmed

    2016-01-01

    Full Text Available This paper demonstrates the effect of incorporating distributed plasticity in nonlinear analytical models used to assess the potential for progressive collapse of steel framed regular building structures. Emphasis on this paper is on the deformation response under the notionally removed column, in a typical Alternate Path (AP method. The AP method employed in this paper is based on the provisions of the Unified Facilities Criteria – Design of Buildings to Resist Progressive Collapse, developed and updated by the U.S. Department of Defense [1]. The AP method is often used for to assess the potential for progressive collapse of building structures that fall under Occupancy Category III or IV. A case study steel building is used to examine the effect of incorporating distributed plasticity, where moment frames were used on perimeter as well as the interior of the three dimensional structural system. It is concluded that the use of moment resisting frames within the structural system will enhance resistance to progressive collapse through ductile deformation response and that it is conserative to ignore the effects of distributed plasticity in determining peak displacement response under the notionally removed column.

  17. Petrographic and geochemical characteristics of dolomitization in the Late Jurassic-Early Cretaceous platform carbonates, Başoba Yayla (Eastern Pontides, NE Turkey)

    Science.gov (United States)

    Yıldız, Merve; Ziya Kırmacı, M.; Kandemir, Raif; Eroğlu, Tuğba

    2015-04-01

    The Late Jurassic-Early Cretaceous Berdiga Formation with a wide distribution in E-W direction in the eastern Pontides (NE Turkey) is composed of platform carbonates. The formation with distinct lithofacies properties in both lateral and vertical directions was deposited on carbonate shelf changing from supratidal to platform margin reef and was buried until the end of Late Cretaceous. One of the typical exposures of formation is found around the Başoba Yayla area (Trabzon, NE Turkey) in northern zone of the eastern Pontides where the formation has a limited distribution. In this area, platform carbonates are 250 m in thickness and from bottom to top composed of dolomite, grainstone-packstone and skeleton wackestone. The 120-m thickened dolomite facies which comprises the lower part of formation contains four dolomite phases as replacement (Rd) and cement (Cd) types. Replacement dolomites (Rd) that are cut by low-amplitude stylolites are developed as 1) thin crystalline planar-s dolomite (Rd1), 2) thin-medium crystalline, texture-protective planar-s dolomite (Rd2) dolomite and 3) medium-coarse crystalline planar-s dolomite (Rd3). Coarse-very coarse crystalline dolomite cement (Cd) filling dissolution spaces and fractures in Rd1 dolomites are cogenetic with low-amplitude stylolites. Replacement dolomites are Ca-rich and non-stoichiometric (Ca56-60Mg40-44) and geochemically have two-population distribution and uniform dull red/non-luminescence appearance. The δ18O compositions of replacement dolomites are from -15.3 to -4.2 o VPDB, δ13C values are 1.5-3.7 o VPDB and 87Sr/86Sr ratios are 0.70675 to 0.70731. Sr, Na, Mn and Fe contents of these dolomites are 74-163 ppm, bdl-200 ppm, 94-553 ppm and 1400-3800 ppm, respectively. Petrographic and geochemical date yield that replacement dolomites (Rd) are formed before the chemical compression at shallow-moderate burial depths from Jurassic-Early Cretaceous seawater and/or seawater partly modified by rock

  18. Characterization of geothermal paleosystem in the Lesser Antilles volcanic arc: structural, petrographic, thermodynamic and petrophysics analysis of Terre-de-Haut (Les Saintes archipelago, Lesser Antilles)

    Science.gov (United States)

    Favier, Alexiane; Navelot, Vivien; Verati, Chrystèle; Lardeaux, Jean-Marc; Corsini, Michel; Diraison, Marc; Géraud, Yves; Mercier de Lépinay, Jeanne; Munschy, Marc

    2017-04-01

    This survey takes part in the GEOTREF project (high enthalpy geothermal energy in fractured reservoirs), supported by the French government program "Investments for the future". The program focuses on the exploration of geothermal resource in the Lesser Antilles volcanic arc. An exclusive license has been issued in the Vieux-Habitants area (Basse-Terre, Guadeloupe) to carry on the development of high-temperature geothermal energy in this active volcanic region. The deep geothermal reservoir on the Basse-Terre island could be characterized in exhumed paleosystems. The reference paleosystem in the Guadeloupe archipelago is located in Terre-de-Haut. Four major fault directions have been highlighted N000-N020, N050-N070, N090-N110 and N130-N140. Field observations emphasize three major cleavage directions overlaying the fault systems: N035-N060, N080-N110, N145-N165. Volcanic rocks affected by cleavage display several metamorphic transformation grades. The more transformed calc-alkaline rocks are located at the intersection of several cleavage directions. Mineralogical transformations due to metamorphism and surimposed fractures are also responsible for strong changes of petrophysical properties. In comparison with the reference protolith of andesitic lava flows outcropping in Vieux-Habitants, which have porosity and permeability lower than 5 % and 10-15 m2, andesites of Terre-de-Haut have better reservoir properties with connected porosity and permeability higher than 15 % and 10-14-10-15 m2 respectively. Thermodynamic modelling based on petrography and chemical composition of the most transformed rocks highlights a steady state mineral assemblage between 0.25 - 1.5 kbar and 350 - 450 ˚ C. It corresponds to a geothermal gradient higher than 120 to 150˚ C/km. This is consistent with temperatures measured in Bouillante wells. However, this geothermal gradient is notably higher to a usual volcanic arc conductive gradient estimated to 70-100˚ C/km. It can be explained by the addition of a convective processes caused by hydrothermal fluid flows.

  19. Analysis of health trait data from on-farm computer systems in the U.S. II: Comparison of genomic analyses including two-stage and single-step methods

    Science.gov (United States)

    The development of genomic selection methodology, with accompanying substantial gains in reliability for low-heritability traits, may dramatically improve the feasibility of genetic improvement of dairy cow health. Many methods for genomic analysis have now been developed, including the “Bayesian Al...

  20. A Comparative Analysis of Assessment and Evaluation Exercises Included in Geography Textbooks Written According to the 2005 Secondary Education Geography Curriculum and Textbooks of the Former Curriculum in Turkey

    Science.gov (United States)

    Yasar, Okan

    2009-01-01

    This study conducts comparative analysis of the assessment and evaluation exercises in the geography textbooks written according to the Secondary Education Geography Curriculum for 2005 in Turkey with those in the former geography textbooks. In this respect, firstly, the assessment and evaluation studies included in geography textbooks written…

  1. Examination of the regulatory frameworks applicable to biologic drugs (including stem cells and their progeny) in Europe, the U.S., and Australia: part I--a method of manual documentary analysis.

    Science.gov (United States)

    Ilic, Nina; Savic, Snezana; Siegel, Evan; Atkinson, Kerry; Tasic, Ljiljana

    2012-12-01

    Recent development of a wide range of regulatory standards applicable to production and use of tissues, cells, and other biologics (or biologicals), as advanced therapies, indicates considerable interest in the regulation of these products. The objective of this study was to analyze and compare high-tier documents within the Australian, European, and U.S. biologic drug regulatory environments using qualitative methodology. Cohort 1 of the selected 18 high-tier regulatory documents from the European Medicines Agency (EMA), the U.S. Food and Drug Administration (FDA), and the Therapeutic Goods Administration (TGA) regulatory frameworks were subject to a manual documentary analysis. These documents were consistent with the legal requirements for manufacturing and use of biologic drugs in humans and fall into six different categories. Manual analysis included a terminology search. The occurrence, frequency, and interchangeable use of different terms and phrases were recorded in the manual documentary analysis. Despite obvious differences, manual documentary analysis revealed certain consistency in use of terminology across analyzed frameworks. Phrase search frequencies have shown less uniformity than the search of terms. Overall, the EMA framework's documents referred to "medicinal products" and "marketing authorization(s)," the FDA documents discussed "drug(s)" or "biologic(s)," and the TGA documents referred to "biological(s)." Although high-tier documents often use different terminology they share concepts and themes. Documents originating from the same source have more conjunction in their terminology although they belong to different frameworks (i.e., Good Clinical Practice requirements based on the Declaration of Helsinki, 1964). Automated (software-based) documentary analysis should be obtained for the conceptual and relational analysis.

  2. Static, Lightweight Includes Resolution for PHP

    NARCIS (Netherlands)

    M.A. Hills (Mark); P. Klint (Paul); J.J. Vinju (Jurgen)

    2014-01-01

    htmlabstractDynamic languages include a number of features that are challenging to model properly in static analysis tools. In PHP, one of these features is the include expression, where an arbitrary expression provides the path of the file to include at runtime. In this paper we present two

  3. MLPA analysis for a panel of syndromes with mental retardation reveals imbalances in 5.8% of patients with mental retardation and dysmorphic features, including duplications of the Sotos syndrome and Williams-Beuren syndrome regions

    DEFF Research Database (Denmark)

    Kirchhoff, Maria; Bisgaard, Anne-Marie; Bryndorf, Thue

    2007-01-01

    -Beuren, Prader-Willi, Angelman, Miller-Dieker, Smith-Magenis, and 22q11-deletion syndromes). Patients were initially referred for HR-CGH analysis and MRS-MLPA was performed retrospectively. MRS-MLPA analysis revealed imbalances in 15/258 patients (5.8%). Ten deletions were identified, including deletions of 1p36......MLPA analysis for a panel of syndromes with mental retardation (MRS-MLPA) was used for investigation of 258 mentally retarded and dysmorphic patients with normal conventional karyotypes (P064 probe set, MRC-Holland, for detection of (micro)deletions associated with 1p36-deletion, Sotos, Williams......, 5q35 (Sotos syndrome), 7q11 (Williams-Beuren syndrome), 17p11 (Smith-Magenis syndrome), 15q11 (Angelman syndrome) and 22q11. Duplications were detected in 5q35, 7q11, 17p13, 17p11 and 22q11. We reviewed another 170 patients referred specifically for MRS-MLPA analysis. Eighty of these patients were...

  4. Nonoxynol-9 spermicide for prevention of vaginally acquired HIV and other sexually transmitted infections: systematic review and meta-analysis of randomised controlled trials including more than 5000 women.

    Science.gov (United States)

    Wilkinson, David; Tholandi, Maya; Ramjee, Gita; Rutherford, George W

    2002-10-01

    We aimed to determine the effectiveness of the vaginally administered spermicide nonoxynol-9 (N-9) among women for the prevention of HIV and other sexually transmitted infections (STIs). We did a systematic review of randomised controlled trials. Nine such trials including 5096 women, predominantly sex workers, comparing N-9 with placebo or no treatment, were included. Primary outcomes were new HIV infection, new episodes of various STIs, and genital lesions. Five trials included HIV and nine included STI outcomes, and all but one (2% of the data) contributed to the meta-analysis. Overall, relative risks of HIV infection (1.12, 95% confidence interval 0.88-1.42), gonorrhoea (0.91, 0.67-1.24), chlamydia (0.88, 0.77-1.01), cervical infection (1.01, 0.84-1.22), trichomoniasis (0.84, 0.69-1.02), bacterial vaginosis (0.88, 0.74-1.04) and candidiasis (0.97, 0.84-1.12) were not significantly different in the N-9 and placebo or no treatment groups. Genital lesions were more common in the N-9 group (1.18, 1.02-1.36). Our review has found no statistically significant reduction in risk of HIV and STIs, and the confidence intervals indicate that any protection that may exist is likely to be very small. There is some evidence of harm through genital lesions. N-9 cannot be recommended for HIV and STI prevention.

  5. Relationships between data from Rock-Eval pyrolysis and proximate, ultimate, petrographic, and physical analyses of 142 diverse U.S. coal samples

    Science.gov (United States)

    Bostick, N.H.; Daws, T.A.

    1994-01-01

    Basic research on coal and oil shale led to automated pyrolysis analysis of petroleum source rocks; most widely used is the Rock-Eval equipment. In order to interpret Rock-Eval analyses in relation to traditional coal data, we analyzed 142 commercial coals with diverse rank, age, maceral and sulfur contents, for most regions of the United States. We compared the Rock-Eval data with traditional industrial coal data, including volatile matter, calorific value, hydrogen and oxygen content, free swelling index, and vitrinite reflectance. We found: (1) there is a close relationship between Tmax and vitrinite reflectance in the ranges 420-590??C Tmax and 0.4-3%Romax of most coals. (2) A close relationship between Tmax and volatile matter (%VM) extends through the entire sample range, including low-rank samples with 35-70% VM, a range where %VM is not considered to be a useful rank parameter. (3) TOC of medium- and high-rank coals is seriously under-measured by Rock-Eval; TOC of low-rank coals (less than 0.8%Romax) is close to "dry basis" carbon from ultimate analysis. (4) The direct relationships between oxygen index (OI) and %O and between hydrogen index (HI) and %H are clear, though only broadly defined. However, there is virtually no band of concentrated data points on the HI versus OI pseudo-Van Krevelen diagram comparable to the "development line" on the H/C versus O/C diagram. (5) There are systematic relationships between Rock-Eval and industrial coal parameters such as calorific value and FSI, but much standardization would be needed before Rock-Eval could find a place in the coal industry. Tests with blends of coal and quartz sand and with various loads of coal alone showed that the amount of organic matter in the Rock-Eval load greatly influences results. Total load in the crucible, if largely inert, plays a small role, however. Increasing absolute or relative coal content causes under-evaluation of Rock-Eval TOC and over-rating of hydrogen. Blends of several

  6. An R package for statistical provenance analysis

    Science.gov (United States)

    Vermeesch, Pieter; Resentini, Alberto; Garzanti, Eduardo

    2016-05-01

    This paper introduces provenance, a software package within the statistical programming environment R, which aims to facilitate the visualisation and interpretation of large amounts of sedimentary provenance data, including mineralogical, petrographic, chemical and isotopic provenance proxies, or any combination of these. provenance comprises functions to: (a) calculate the sample size required to achieve a given detection limit; (b) plot distributional data such as detrital zircon U-Pb age spectra as Cumulative Age Distributions (CADs) or adaptive Kernel Density Estimates (KDEs); (c) plot compositional data as pie charts or ternary diagrams; (d) correct the effects of hydraulic sorting on sandstone petrography and heavy mineral composition; (e) assess the settling equivalence of detrital minerals and grain-size dependence of sediment composition; (f) quantify the dissimilarity between distributional data using the Kolmogorov-Smirnov and Sircombe-Hazelton distances, or between compositional data using the Aitchison and Bray-Curtis distances; (e) interpret multi-sample datasets by means of (classical and nonmetric) Multidimensional Scaling (MDS) and Principal Component Analysis (PCA); and (f) simplify the interpretation of multi-method datasets by means of Generalised Procrustes Analysis (GPA) and 3-way MDS. All these tools can be accessed through an intuitive query-based user interface, which does not require knowledge of the R programming language. provenance is free software released under the GPL-2 licence and will be further expanded based on user feedback.

  7. Geochemical and mineralogical analysis of stone anchors from west coast of India: Provenance study using thin sections, XRF and SEM-EDS

    Digital Repository Service at National Institute of Oceanography (India)

    Tripati, S.; Mudholkar, A.V.; Vora, K.H.; Rao, B.R.; Gaur, A.S.; Sundaresh

    , sizes and weights ranging between 16 and 410 kg. Sixteen (10 Indo-Arabian, 4 Ringstone and 2 Single hole type) of the total of 269 stone anchors have been studied to determine provenance of rock through petrographic analysis using thin section studies, X...

  8. (including travel dates) Proposed itinerary

    Indian Academy of Sciences (India)

    Ashok

    31 July to 22 August 2012 (including travel dates). Proposed itinerary: Arrival in Bangalore on 1 August. 1-5 August: Bangalore, Karnataka. Suggested institutions: Indian Institute of Science, Bangalore. St Johns Medical College & Hospital, Bangalore. Jawaharlal Nehru Centre, Bangalore. 6-8 August: Chennai, TN.

  9. Identification and phenotypic characterization of a second collagen adhesin, Scm, and genome-based identification and analysis of 13 other predicted MSCRAMMs, including four distinct pilus loci, in Enterococcus faecium.

    Science.gov (United States)

    Sillanpää, Jouko; Nallapareddy, Sreedhar R; Prakash, Vittal P; Qin, Xiang; Höök, Magnus; Weinstock, George M; Murray, Barbara E

    2008-10-01

    Attention has recently been drawn to Enterococcus faecium because of an increasing number of nosocomial infections caused by this species and its resistance to multiple antibacterial agents. However, relatively little is known about the pathogenic determinants of this organism. We have previously identified a cell-wall-anchored collagen adhesin, Acm, produced by some isolates of E. faecium, and a secreted antigen, SagA, exhibiting broad-spectrum binding to extracellular matrix proteins. Here, we analysed the draft genome of strain TX0016 for potential microbial surface components recognizing adhesive matrix molecules (MSCRAMMs). Genome-based bioinformatics identified 22 predicted cell-wall-anchored E. faecium surface proteins (Fms), of which 15 (including Acm) had characteristics typical of MSCRAMMs, including predicted folding into a modular architecture with multiple immunoglobulin-like domains. Functional characterization of one [Fms10; redesignated second collagen adhesin of E. faecium (Scm)] revealed that recombinant Scm(65) (A- and B-domains) and Scm(36) (A-domain) bound to collagen type V efficiently in a concentration-dependent manner, bound considerably less to collagen type I and fibrinogen, and differed from Acm in their binding specificities to collagen types IV and V. Results from far-UV circular dichroism measurements of recombinant Scm(36) and of Acm(37) indicated that these proteins were rich in beta-sheets, supporting our folding predictions. Whole-cell ELISA and FACS analyses unambiguously demonstrated surface expression of Scm in most E. faecium isolates. Strikingly, 11 of the 15 predicted MSCRAMMs clustered in four loci, each with a class C sortase gene; nine of these showed similarity to Enterococcus faecalis Ebp pilus subunits and also contained motifs essential for pilus assembly. Antibodies against one of the predicted major pilus proteins, Fms9 (redesignated EbpC(fm)), detected a 'ladder' pattern of high-molecular-mass protein bands in a

  10. Association of extremely high levels of high-density lipoprotein cholesterol with cardiovascular mortality in a pooled analysis of 9 cohort studies including 43,407 individuals: The EPOCH-JAPAN study.

    Science.gov (United States)

    Hirata, Aya; Sugiyama, Daisuke; Watanabe, Makoto; Tamakoshi, Akiko; Iso, Hiroyasu; Kotani, Kazuhiko; Kiyama, Masahiko; Yamada, Michiko; Ishikawa, Shizukiyo; Murakami, Yoshitaka; Miura, Katsuyuki; Ueshima, Hirotsugu; Okamura, Tomonori

    2018-02-08

    The effect of very high or extremely high levels of high-density lipoprotein cholesterol (HDL-C) on cardiovascular disease (CVD) is not well described. Although a few recent studies have reported the adverse effects of extremely high levels of HDL-C on CVD events, these did not show a statistically significant association between extremely high levels of HDL-C and cause-specific CVD mortality. In addition, Asian populations have not been studied. We examine the impact of extremely high levels of HDL-C on cause-specific CVD mortality using pooled data of Japanese cohort studies. We performed a large-scale pooled analysis of 9 Japanese cohorts including 43,407 participants aged 40-89 years, dividing the participants into 5 groups by HDL-C levels, including extremely high levels of HDL-C ≥2.33 mmol/L (≥90 mg/dL). We estimated the adjusted hazard ratio of each HDL-C category for all-cause death and cause-specific deaths compared with HDL-C 1.04-1.55 mmol/L (40-59 mg/dL) using a cohort-stratified Cox proportional hazards model. During a 12.1-year follow-up, 4995 all-cause deaths and 1280 deaths due to overall CVD were identified. Extremely high levels of HDL-C were significantly associated with increased risk of atherosclerotic CVD mortality (hazard ratio = 2.37, 95% confidence interval: 1.37-4.09 for total) and increased risk for coronary heart disease and ischemic stroke. In addition, the risk for extremely high HDL-C was more evident among current drinkers. We showed extremely high levels of HDL-C had an adverse effect on atherosclerotic CVD mortality in a pooled analysis of Japanese cohorts. Copyright © 2018 National Lipid Association. Published by Elsevier Inc. All rights reserved.

  11. Malignant lymphomas (including myeloproliferative disorders)

    International Nuclear Information System (INIS)

    Todd, I.D.H.

    1985-01-01

    This chapter deals with the radiotherapy and cytotoxic chemotherapy of the malignant lymphomas. Included within this group are Hodgkin's disease, non-Hodgkin's lymphoma, mycosis fungoides, and chronic lymphatic leukaemia. A further section deals with the myeloproliferative disorders, including granulocytic leukaemia, polycythaemia vera, and primary thrombocythaemia. Excluded are myeloma and reticulum cell sarcoma of bone and acute leukaemia. With regard to Hodgkin's disease, the past 25 years have seen general recognition of the curative potential of radiotherapy, at least in the local stages, and, more recently, awareness of the ability to achieve long-term survival after combination chemotherapy in generalised or in recurrent disease. At the same time the importance of staging has become appreciated and the introduction of procedures such as lymphography, staging laparotomy, and computer tomography (CT) has enormously increased its reliability. Advances have not been so dramatic in the complex group of non-Hodgkins's lymphomas, but are still very real

  12. Valuation of Green Walls and Green Roofs as Soundscape Measures: Including Monetised Amenity Values Together with Noise-attenuation Values in a Cost-benefit Analysis of a Green Wall Affecting Courtyards

    Directory of Open Access Journals (Sweden)

    Jian Kang

    2012-10-01

    Full Text Available Economic unit values of soundscape/acoustic effects have been based on changes in the number of annoyed persons or on decibel changes. The normal procedure has been the application of these unit values to noise-attenuation measures affecting the noisier façade of a dwelling. Novel modular vegetation-based soundscape measures, so-called green walls, might be relevant for both noisy and quieter areas. Moreover, their benefits will comprise noise attenuation as well as non-acoustic amenity effects. One challenge is to integrate the results of some decades of non-acoustic research on the amenity value of urban greenery into design of the urban sound environment, and incorporate these non-acoustic properties in the overall economic assessment of noise control and overall sound environment improvement measures. Monetised unit values for green walls have been included in two alternative cases, or demonstration projects, of covering the entrances to blocks of flats with a green wall. Since these measures improve the noise environment on the quiet side of the dwellings and courtyards, not the most exposed façade, adjustment factors to the nominal quiet side decibel reductions to arrive at an estimate of the equivalent overall acoustic improvement have been applied. A cost-benefit analysis of the green wall case indicates that this measure is economically promising, when valuing the noise attenuation in the quieter area and adding the amenity/aesthetic value of the green wall.

  13. Valuation of Green Walls and Green Roofs as Soundscape Measures: Including Monetised Amenity Values Together with Noise-attenuation Values in a Cost-benefit Analysis of a Green Wall Affecting Courtyards

    Science.gov (United States)

    Veisten, Knut; Smyrnova, Yuliya; Klæboe, Ronny; Hornikx, Maarten; Mosslemi, Marjan; Kang, Jian

    2012-01-01

    Economic unit values of soundscape/acoustic effects have been based on changes in the number of annoyed persons or on decibel changes. The normal procedure has been the application of these unit values to noise-attenuation measures affecting the noisier façade of a dwelling. Novel modular vegetation-based soundscape measures, so-called green walls, might be relevant for both noisy and quieter areas. Moreover, their benefits will comprise noise attenuation as well as non-acoustic amenity effects. One challenge is to integrate the results of some decades of non-acoustic research on the amenity value of urban greenery into design of the urban sound environment, and incorporate these non-acoustic properties in the overall economic assessment of noise control and overall sound environment improvement measures. Monetised unit values for green walls have been included in two alternative cases, or demonstration projects, of covering the entrances to blocks of flats with a green wall. Since these measures improve the noise environment on the quiet side of the dwellings and courtyards, not the most exposed façade, adjustment factors to the nominal quiet side decibel reductions to arrive at an estimate of the equivalent overall acoustic improvement have been applied. A cost-benefit analysis of the green wall case indicates that this measure is economically promising, when valuing the noise attenuation in the quieter area and adding the amenity/aesthetic value of the green wall. PMID:23202816

  14. Valuation of green walls and green roofs as soundscape measures: including monetised amenity values together with noise-attenuation values in a cost-benefit analysis of a green wall affecting courtyards.

    Science.gov (United States)

    Veisten, Knut; Smyrnova, Yuliya; Klæboe, Ronny; Hornikx, Maarten; Mosslemi, Marjan; Kang, Jian

    2012-10-24

    Economic unit values of soundscape/acoustic effects have been based on changes in the number of annoyed persons or on decibel changes. The normal procedure has been the application of these unit values to noise-attenuation measures affecting the noisier façade of a dwelling. Novel modular vegetation-based soundscape measures, so-called green walls, might be relevant for both noisy and quieter areas. Moreover, their benefits will comprise noise attenuation as well as non-acoustic amenity effects. One challenge is to integrate the results of some decades of non-acoustic research on the amenity value of urban greenery into design of the urban sound environment, and incorporate these non-acoustic properties in the overall economic assessment of noise control and overall sound environment improvement measures. Monetised unit values for green walls have been included in two alternative cases, or demonstration projects, of covering the entrances to blocks of flats with a green wall. Since these measures improve the noise environment on the quiet side of the dwellings and courtyards, not the most exposed façade, adjustment factors to the nominal quiet side decibel reductions to arrive at an estimate of the equivalent overall acoustic improvement have been applied. A cost-benefit analysis of the green wall case indicates that this measure is economically promising, when valuing the noise attenuation in the quieter area and adding the amenity/aesthetic value of the green wall.

  15. Analysis of plutonium isotope ratios including238Pu/239Pu in individual U-Pu mixed oxide particles by means of a combination of alpha spectrometry and ICP-MS.

    Science.gov (United States)

    Esaka, Fumitaka; Yasuda, Kenichiro; Suzuki, Daisuke; Miyamoto, Yutaka; Magara, Masaaki

    2017-04-01

    Isotope ratio analysis of individual uranium-plutonium (U-Pu) mixed oxide particles contained within environmental samples taken from nuclear facilities is proving to be increasingly important in the field of nuclear safeguards. However, isobaric interferences, such as 238 U with 238 Pu and 241 Am with 241 Pu, make it difficult to determine plutonium isotope ratios in mass spectrometric measurements. In the present study, the isotope ratios of 238 Pu/ 239 Pu, 240 Pu/ 239 Pu, 241 Pu/ 239 Pu, and 242 Pu/ 239 Pu were measured for individual Pu and U-Pu mixed oxide particles by a combination of alpha spectrometry and inductively coupled plasma mass spectrometry (ICP-MS). As a consequence, we were able to determine the 240 Pu/ 239 Pu, 241 Pu/ 239 Pu, and 242 Pu/ 239 Pu isotope ratios with ICP-MS after particle dissolution and chemical separation of plutonium with UTEVA resins. Furthermore, 238 Pu/ 239 Pu isotope ratios were able to be calculated by using both the 238 Pu/( 239 Pu+ 240 Pu) activity ratios that had been measured through alpha spectrometry and the 240 Pu/ 239 Pu isotope ratios determined through ICP-MS. Therefore, the combined use of alpha spectrometry and ICP-MS is useful in determining plutonium isotope ratios, including 238 Pu/ 239 Pu, in individual U-Pu mixed oxide particles. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. Development of a method for calculating the cost of the program for decommissioning of nuclear power plants. Prognosis of future costs for the authorities including the corresponding net present value. Analysis performed May 6-7 and June 8 2004

    International Nuclear Information System (INIS)

    Borg, Lorens; Lichtenberg, Steen; Lindskog, Staffan

    2004-09-01

    The aim of this report is to present a calculation of the authorities' total future costs in terms of their activities to monitor a safe and prudent decommission of the power plants, including the long term storage of the used fuel. An assessment of the inherent uncertainty in this estimate is also made. The study forms an integrated part of the total monitoring into the financial assessment of the whole programme of decommissioning and demolition of the Swedish nuclear power plants that continuously is made by SKI. Hence, the estimate is presented with the additional function of supporting SKI's annual calculations of fees and contingencies in accordance with the Swedish Finance Act. Main result The expected Net Present Value of the authorities' costs as at January 2004 price level have consequently been estimated as follows: Mean Value (M): 2303 MSEK Standard deviation (S): 538 MSEK 8 This result tallies with the corresponding prognoses for the last two years. An additional clarification of a number of key figures resulted in some reduction of the total Net Present Value. By way of supplement to this main result, the undiscounted costs have been estimated (calculation 2). Besides, a tentative estimate has also been made by incorporating the official view on the future development on real rate of return in a long time perspective (calculation 3). The uncertainty of the result is significant in terms of the final budget figures and of the scale of the supplementary amounts in those situations where the budgets must be prudent and conservative. There may be a potential for further reduction of the current uncertainty in that the greatest causes of uncertainty now have been identified and ranked in order of priority. The greatest causes of uncertainty are set out in the table below. No. Cause of uncertainty Uncertainty group 1 Priority 2 1 Correction allowing for the uncertainty of the real interest rate N 55 % 2 Productivity E2 8 % 3 Uncertainty in the current base

  17. Device including a contact detector

    DEFF Research Database (Denmark)

    2011-01-01

    The present invention relates to a probe for determining an electrical property of an area of a surface of a test sample, the probe is intended to be in a specific orientation relative to the test sample. The probe may comprise a supporting body defining a first surface. A plurality of cantilever...... of cantilever arms (12) contacting the surface of the test sample when performing the movement....... arms (12) may extend from the supporting body in co-planar relationship with the first surface. The plurality of cantilever arms (12) may extend substantially parallel to each other and each of the plurality of cantilever arms (12) may include an electrical conductive tip for contacting the area...

  18. Suicides and Suicide Attempts during Long-Term Treatment with Antidepressants: A Meta-Analysis of 29 Placebo-Controlled Studies Including 6,934 Patients with Major Depressive Disorder.

    Science.gov (United States)

    Braun, Cora; Bschor, Tom; Franklin, Jeremy; Baethge, Christopher

    It is unclear whether antidepressants can prevent suicides or suicide attempts, particularly during long-term use. We carried out a comprehensive review of long-term studies of antidepressants (relapse prevention). Sources were obtained from 5 review articles and by searches of MEDLINE, PubMed Central and a hand search of bibliographies. We meta-analyzed placebo-controlled antidepressant RCTs of at least 3 months' duration and calculated suicide and suicide attempt incidence rates, incidence rate ratios and Peto odds ratios (ORs). Out of 807 studies screened 29 were included, covering 6,934 patients (5,529 patient-years). In total, 1.45 suicides and 2.76 suicide attempts per 1,000 patient-years were reported. Seven out of 8 suicides and 13 out of 14 suicide attempts occurred in antidepressant arms, resulting in incidence rate ratios of 5.03 (0.78-114.1; p = 0.102) for suicides and of 9.02 (1.58-193.6; p = 0.007) for suicide attempts. Peto ORs were 2.6 (0.6-11.2; nonsignificant) and 3.4 (1.1-11.0; p = 0.04), respectively. Dropouts due to unknown reasons were similar in the antidepressant and placebo arms (9.6 vs. 9.9%). The majority of suicides and suicide attempts originated from 1 study, accounting for a fifth of all patient-years in this meta-analysis. Leaving out this study resulted in a nonsignificant incidence rate ratio for suicide attempts of 3.83 (0.53-91.01). Therapists should be aware of the lack of proof from RCTs that antidepressants prevent suicides and suicide attempts. We cannot conclude with certainty whether antidepressants increase the risk for suicide or suicide attempts. Researchers must report all suicides and suicide attempts in RCTs. © 2016 S. Karger AG, Basel.

  19. Improved detection of genetic markers of antimicrobial resistance by hybridization probe-based melting curve analysis using primers to mask proximal mutations: examples include the influenza H275Y substitution.

    Science.gov (United States)

    Whiley, David M; Jacob, Kevin; Nakos, Jennifer; Bletchly, Cheryl; Nimmo, Graeme R; Nissen, Michael D; Sloots, Theo P

    2012-06-01

    Numerous real-time PCR assays have been described for detection of the influenza A H275Y alteration. However, the performance of these methods can be undermined by sequence variation in the regions flanking the codon of interest. This is a problem encountered more broadly in microbial diagnostics. In this study, we developed a modification of hybridization probe-based melting curve analysis, whereby primers are used to mask proximal mutations in the sequence targets of hybridization probes, so as to limit the potential for sequence variation to interfere with typing. The approach was applied to the H275Y alteration of the influenza A (H1N1) 2009 strain, as well as a Neisseria gonorrhoeae mutation associated with antimicrobial resistance. Assay performances were assessed using influenza A and N. gonorrhoeae strains characterized by DNA sequencing. The modified hybridization probe-based approach proved successful in limiting the effects of proximal mutations, with the results of melting curve analyses being 100% consistent with the results of DNA sequencing for all influenza A and N. gonorrhoeae strains tested. Notably, these included influenza A and N. gonorrhoeae strains exhibiting additional mutations in hybridization probe targets. Of particular interest was that the H275Y assay correctly typed influenza A strains harbouring a T822C nucleotide substitution, previously shown to interfere with H275Y typing methods. Overall our modified hybridization probe-based approach provides a simple means of circumventing problems caused by sequence variation, and offers improved detection of the influenza A H275Y alteration and potentially other resistance mechanisms.

  20. Petrographic, mineralogical, geochemical and paleo environmental characterization of radioactive anomaly associated to carbonate rocks from Jandaira formation of high cretaceous from Potiguar basin - Rio Grande do Norte - Brazil

    International Nuclear Information System (INIS)

    Matsuda, N.S.

    1988-01-01

    The Jandaira Formation (Turonian/Maastrichtian - Potiguar Basin, Brazil) presents an anomalous radioactive marker in the upper part of its carbonatic section. This marker of 3-20 m in thickness, comprises an area of about 3500 Km 2 and shows a radioactivity of 470 UAPI, against a background of 20 UAPI on the Gamma Ray Log. In the effort of characterizing this marker, petrological, mineralogical, geological and paleontological, analyses were made in ditch samples of selected 23 wells. This marker is composed by bioclastics packstones to mudstones, mainly constituted of planktonic and bentonic forams, deposited in relatively deep water. Chemical analysis of the P 205 richest samples, the ones show that they are also enriched on U, F, As, Cr, Cu, Mo, Ni, Pb, S, Se, V, Y, Yb and on all rare-earth elements. The origin of the radioactive anomaly is due to the presence of sedimentary phosphates (phosphorite) made-up of uraniferous coloform apatite. (author)

  1. Petrographic and petrogenetic studies of adakitic magmatism of Gavdel (Shivar Dagh in Garehdagh-South Arminian Zone (Northwest of Iran (Irankuh Pb-Zn deposit, Southwest of Isfahan

    Directory of Open Access Journals (Sweden)

    Ahmad Jahangiri

    2017-03-01

    Full Text Available Gavdel intrusive body, situated in NW Iran and NE of Uromieh-Dokhtar zone, is a part of Garehdagh, South-Arminian Zone (Arasbaran. The major outcrops of intrusive include of granodiorite, monzonite accompanied with granodioritic dyke. The studied samples display granular texture with essential minerals of, plagioclase, K-feldspar, amphibole ± quartz ± clinopyroxene. Geochemically, the studied rocks characterized by SiO2 in the range of (59.1-67.8%, Al2O3 (14.09-18.3%, high Sr (507.18-1150 ppm content , high ratios of Sr/Y (32.93-83.54, La/Yb and low Y (12.05-16.13 contents, which can indicate the adakitic characters of studied rocks. These features of Gavdel intrusive display geochemical similarity with high SiO2 adakites (HAS that comprise enriched LREE, LILE and depleted HFS elements such as Ta, Nb, and Ti. The fractionated REE pattern and low HREE and Y amount can be related to the occurrence of garnet or amphibole in residual source of adakitic magmas. High content of Sr and depletion of Ta, Nb and Ti can be ascribed either to the absence of plagioclase and the presence of Fe-Ti oxides in melt residue or fractionation of titanomagnetite and amphibole minerals with respect to petrograhic indications. Subducted slab breaking off followed by its partial melting and the overlying sediments accompanied by crustal assimilation through magma rising generated the magma in the studied area and the NW of Iran.

  2. When did the Penglai orogeny begin on Taiwan?: Geochronological and petrographic constraints on the exhumed mountain belts and foreland-basin sequences

    Science.gov (United States)

    Chen, W. S.; Syu, S. J.; Yeh, J. J.

    2017-12-01

    Foreland basin receives large amounts of synorogenic infill that is eroded from the adjacent exhumed mountain belt, and therefore provides the important information on exhumation evolution. Furthermore, a complete stratigraphic sequence of Taiwan mountain belt consists of five units of Miocene sedimentary rocks (the Western Foothills and the uppermost sequence on the proto-Taiwan mountain belt), Oligocene argillite (the Hsuehshan Range), Eocene quartzite (the Hsuehshan Range), Eocene-Miocene slate and schist (Backbone Range), and Cretaceous schist (Backbone Range) from top to bottom. Based on the progressive unroofing history, the initiation of foreland basin received sedimentary lithic sediments from the uppermost sequence of proto-Taiwan mountain belt, afterwards, and receiving low- to medium-grade metamorphic lithic sediments in ascending order of argillite, quartzite, slate, and schist clasts. Therefore, the sedimentary lithics from mountain belt were deposited which represents the onset of the mountain uplift. In this study, the first appearance of sedimentary lithic sediments occurs in the Hengchun Peninsula at the middle Miocene (ca. 12-10 Ma). Thus, sandstone petrography of the late Miocene formation (10-5.3 Ma) shows a predominantly recycled sedimentary and low-grade metamorphic sources, including sandstone, argillite and quartzite lithic sediments of 10-25% which records erosion to slightly deeper metamorphic terrane on the mountain belt. Based on the results of previous thermogeochronological studies of the Yuli belt, it suggests that the middle Miocene occurred mountain uplift. The occurrence of low-grade metamorphic lithic sediments in the Hengchun Peninsula during late Miocene is coincident with the cooling ages of uplift and denuded Yuli schist belt at the eastern limb of Backbone Range.

  3. Petrographic study and preliminary conceptual model of the Ixtlan de los Hervores geothermal zone, Michoacan, Mexico; Estudio petrografico y modelo conceptual preliminar de la zona geotermica de Ixtlan de los Hervores, Michoacan, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Viggiano-Guerra, Julio C; Gutierrez-Negrin, Luis C.A [Comision Federal de Electricidad (Mexico)

    2007-10-15

    Petrographic studies of cuttings from the shallow well Ixtlan 2, drilled in the Ixtlan de los Hervores geothermal zone, State of Michoacan, Mexico, at a maximum depth of 159 meters, together with results of previous exploration studies, allow to delineate a preliminary conceptual model of the probable geothermal system. It is formed by a wide-fracture zone system, with low topographic relief and shallow water level. Its hydrothermal fluids are of sodium-chloride type, neutral pH, silica oversaturated in the discharge and with temperatures between 125 and 225 degrees Celsius, based on the geothermometry and the hydrothermal mineral assemblage encountered in the well. The assemblage of laumontite + quartz + calcite + chlorite/smectite + pyrite is typical for the zeolitic facies, beneath of which it is possible to encounter the epidote-wairakite facies, with higher temperatures. The favorable conditions of the zone allow to recommend continuation of exploration in the same. [Spanish] El estudio petrografico de muestras de canal de la perforacion del pozo somero Ixtlan 2, con una profundidad maxima de 159 metros y ubicado en la zona geotermica de Ixtlan de Los Hervores, Michoacan, Mexico, aunado a los resultados de estudios previos de exploracion superficial, han permitido la configuracion de un modelo conceptual preliminar del probable yacimiento geotermico. Se trata de un sistema zona de fractura ancha, bajo relieve y nivel freatico somero, con fluidos hidrotermales de tipo clorurado-sodico, pH neutro, sobresaturados de silice en la descarga, y con temperatura entre 125 y 225 grados Celsius, de acuerdo con la geotermometria + cuarzo + calcita + clorita/esmectita + pirita es tipica de la facies zeolitica, debajo de la cual podria hallarse la facies de epidota-wairakita, con temperaturas mas altas. Las condiciones favorables de la zona permiten recomendar la continuacion de la exploracion en la misma.

  4. The use of nuclear and related techniques for the studies of airborne particulate matter in workplace including tissue analysis and possible impacts on human health in a metal industry

    International Nuclear Information System (INIS)

    Widjajakusuma, B.; Djojosubroto, H.; Kumolowati, E.

    1998-01-01

    Various processes in a metal industry may produce gases and fine airborne particulate matter that hazardous to human health. The present study deals with assessment of levels and health effects of airborne particulate matter in a metal industry. The objective is achieved by determination of elemental levels in blood, nail and hair of workers and airborne particulate matter that are collected from their workplace. The elemental levels in blood, nail and hair of the workers will be compared to those of control. Their health condition are examined by medical examination and biochemical analysis of their blood. The blood was drawn following an overnight fast before breakfast, by means of I.V. catheter into three polyethylene tubes. The blood samples in the first tubes were sent to clinical laboratory for biochemical examination. Those in the second and third tubes, which are considered free from metal contamination by the needle of the catheter, are used for trace element study. Sera in the polyethylene tubes were separated from erythrocyte by centrifugation, then cooled by liquid nitrogen and freeze dried. Approximately 1 g of toe nail and hair samples were taken respectively from every worker. To eliminate grease and surface contamination the hair samples were rinse with acetone. Airborne particulate samples were collected from the workplace using Gent sampler. These samples are ready for elemental analysis. Results of biochemical analysis and medical examinations of the workers are presented in this report. The correlation among various parameters will be determined by statistical analysis. (author)

  5. Risk of second non-breast cancer among patients treated with and without postoperative radiotherapy for primary breast cancer: A systematic review and meta-analysis of population-based studies including 522,739 patients

    DEFF Research Database (Denmark)

    Grantzau, Trine; Overgaard, Jens

    2016-01-01

    of the general female population. From each study the SIRs were extracted and then pooled using random-effects meta-analysis. SIRs were pooled as an overall estimate and according to time since breast cancer diagnosis. RESULTS: 22 studies were eligible for inclusion, comprising 245,575 irradiated and 277,164 non......, thyroid and connective tissues progressively increased over time, peaking at 10-15years following breast cancer diagnosis. Summary estimates at ⩾15years after breast cancer irradiation were 1.91 for lung, 2.71 for esophagus, 3.15 for thyroid and 6.54 at ⩾10years for second sarcomas. Non...

  6. Clinical-dosimetric analysis of measures of dysphagia including gastrostomy-tube dependence among head and neck cancer patients treated definitively by intensity-modulated radiotherapy with concurrent chemotherapy

    Directory of Open Access Journals (Sweden)

    Newman Kathleen

    2009-11-01

    Full Text Available Abstract Purpose To investigate the association between dose to various anatomical structures and dysphagia among patients with head and neck cancer treated by definitive intensity-modulated radiotherapy (IMRT and concurrent chemotherapy. Methods and materials Thirty-nine patients with squamous cancer of the head and neck were treated by definitive concurrent chemotherapy and IMRT to a median dose of 70 Gy (range, 68 to 72. In each patient, a gastrostomy tube (GT was prophylacticly placed prior to starting treatment. Prolonged GT dependence was defined as exceeding the median GT duration of 192 days. Dysphagia was scored using standardized quality-of-life instruments. Dose-volume histogram (DVH data incorporating the superior/middle pharyngeal constrictors (SMPC, inferior pharyngeal constrictor (IPC, cricoid pharyngeal inlet (CPI, and cervical esophagus (CE were analyzed in relation to prolonged GT dependence, dysphagia, and weight loss. Results At 3 months and 6 months after treatment, 87% and 44% of patients, respectively, were GT dependent. Spearman's ρ analysis identified statistical correlations (p 30%, IPC V60 > 60%, IPC Dmean > 60 Gy, and CPI Dmax > 62 Gy predicted for greater than 50% probability of prolonged GT dependence. Conclusion Our analysis suggests that adhering to the following parameters may decrease the risk of prolonged GT dependence and dysphagia: IPC V65

  7. Petrographic observations suggestive of microbial mats from ...

    Indian Academy of Sciences (India)

    facultative anoxygenic cyanobacteria; In: Fossil Algae. (ed) E Flügel (New York: Springer-Verlag), pp. 37–56. Nair N G K and Ray A 1977 Syndepositional and diage- netic features in the Pyrite Ores of Amjhore, Bihar, India;. Mineral. Deposita 12 151–154. O'Brien N R 1990 Significance of lamination in the Toarcian.

  8. Monitoring the extraction of additives and additive degradation products from polymer packaging into solutions by multi-residue method including solid phase extraction and ultra-high performance liquid chromatography-tandem mass spectrometry analysis.

    Science.gov (United States)

    Pouech, Charlène; Lafay, Florent; Wiest, Laure; Baudot, Robert; Léonard, Didier; Cren-Olivé, Cécile

    2014-02-01

    The use of polymer materials in industry for product packaging is increasing. The presence of additives in the polymer matrix enables the modification or improvement of the properties and performance of the polymer, but these industries are concerned regarding the extractability of these additives. The quantification of these additives is particularly challenging because of the presence of these substances as contaminants in all the analytical equipment and the diversity of their physicochemical properties. In this context, a multi-residue analytical method was developed for the trace analysis of the twenty main additives (and their degradation products) authorized in plastic products such as pharmaceutical packaging (e.g., antioxidants, release agents, and light absorbers). This analytical method consisted of a solid phase extraction (SPE) followed by an analysis using ultra-high performance liquid chromatography coupled to a tandem mass spectrometer (UHPLC-MS/MS). A comparison of two ionization interfaces and the optimization of the extraction procedure were discussed. The influence of the quality of the solvent type (distilled versus not distilled) and the nature of the SPE cartridges (Polypropylene versus Teflon(®)) were demonstrated. The optimized method exhibited a quantification limit lower than 20 ng mL(-1) and recoveries between 70 % and 120 % for all compounds. Finally, the method was validated according to the ICH directive and was subsequently applied to the extraction of polymers under different pH conditions and storage temperatures. To the best of our knowledge, this study presents the first methodology allowing the simultaneous quantification of 24 additives at low ng mL(-1).

  9. Melamine detection by mid- and near-infrared (MIR/NIR) spectroscopy: a quick and sensitive method for dairy products analysis including liquid milk, infant formula, and milk powder.

    Science.gov (United States)

    Balabin, Roman M; Smirnov, Sergey V

    2011-07-15

    Melamine (2,4,6-triamino-1,3,5-triazine) is a nitrogen-rich chemical implicated in the pet and human food recalls and in the global food safety scares involving milk products. Due to the serious health concerns associated with melamine consumption and the extensive scope of affected products, rapid and sensitive methods to detect melamine's presence are essential. We propose the use of spectroscopy data-produced by near-infrared (near-IR/NIR) and mid-infrared (mid-IR/MIR) spectroscopies, in particular-for melamine detection in complex dairy matrixes. None of the up-to-date reported IR-based methods for melamine detection has unambiguously shown its wide applicability to different dairy products as well as limit of detection (LOD) below 1 ppm on independent sample set. It was found that infrared spectroscopy is an effective tool to detect melamine in dairy products, such as infant formula, milk powder, or liquid milk. ALOD below 1 ppm (0.76±0.11 ppm) can be reached if a correct spectrum preprocessing (pretreatment) technique and a correct multivariate (MDA) algorithm-partial least squares regression (PLS), polynomial PLS (Poly-PLS), artificial neural network (ANN), support vector regression (SVR), or least squares support vector machine (LS-SVM)-are used for spectrum analysis. The relationship between MIR/NIR spectrum of milk products and melamine content is nonlinear. Thus, nonlinear regression methods are needed to correctly predict the triazine-derivative content of milk products. It can be concluded that mid- and near-infrared spectroscopy can be regarded as a quick, sensitive, robust, and low-cost method for liquid milk, infant formula, and milk powder analysis. Copyright © 2011 Elsevier B.V. All rights reserved.

  10. Is expanding HPV vaccination programs to include school-aged boys likely to be value-for-money: a cost-utility analysis in a country with an existing school-girl program

    Science.gov (United States)

    2014-01-01

    Background Similar to many developed countries, vaccination against human papillomavirus (HPV) is provided only to girls in New Zealand and coverage is relatively low (47% in school-aged girls for dose 3). Some jurisdictions have already extended HPV vaccination to school-aged boys. Thus, exploration of the cost-utility of adding boys’ vaccination is relevant. We modeled the incremental health gain and costs for extending the current girls-only program to boys, intensifying the current girls-only program to achieve 73% coverage, and extension of the intensive program to boys. Methods A Markov macro-simulation model, which accounted for herd immunity, was developed for an annual cohort of 12-year-olds in 2011 and included the future health states of: cervical cancer, pre-cancer (CIN I to III), genital warts, and three other HPV-related cancers. In each state, health sector costs, including additional health costs from extra life, and quality-adjusted life-years (QALYs) were accumulated. The model included New Zealand data on cancer incidence and survival, and other cause mortality (all by sex, age, ethnicity and deprivation). Results At an assumed local willingness-to-pay threshold of US$29,600, vaccination of 12-year-old boys to achieve the current coverage for girls would not be cost-effective, at US$61,400/QALY gained (95% UI $29,700 to $112,000; OECD purchasing power parities) compared to the current girls-only program, with an assumed vaccine cost of US$59 (NZ$113). This was dominated though by the intensified girls-only program; US$17,400/QALY gained (95% UI: dominant to $46,100). Adding boys to this intensified program was also not cost-effective; US$128,000/QALY gained, 95% UI: $61,900 to $247,000). Vaccination of boys was not found to be cost-effective, even for additional scenarios with very low vaccine or program administration costs – only when combined vaccine and administration costs were NZ$125 or lower per dose was vaccination of boys cost

  11. Is expanding HPV vaccination programs to include school-aged boys likely to be value-for-money: a cost-utility analysis in a country with an existing school-girl program.

    Science.gov (United States)

    Pearson, Amber L; Kvizhinadze, Giorgi; Wilson, Nick; Smith, Megan; Canfell, Karen; Blakely, Tony

    2014-06-26

    Similar to many developed countries, vaccination against human papillomavirus (HPV) is provided only to girls in New Zealand and coverage is relatively low (47% in school-aged girls for dose 3). Some jurisdictions have already extended HPV vaccination to school-aged boys. Thus, exploration of the cost-utility of adding boys' vaccination is relevant. We modeled the incremental health gain and costs for extending the current girls-only program to boys, intensifying the current girls-only program to achieve 73% coverage, and extension of the intensive program to boys. A Markov macro-simulation model, which accounted for herd immunity, was developed for an annual cohort of 12-year-olds in 2011 and included the future health states of: cervical cancer, pre-cancer (CIN I to III), genital warts, and three other HPV-related cancers. In each state, health sector costs, including additional health costs from extra life, and quality-adjusted life-years (QALYs) were accumulated. The model included New Zealand data on cancer incidence and survival, and other cause mortality (all by sex, age, ethnicity and deprivation). At an assumed local willingness-to-pay threshold of US$29,600, vaccination of 12-year-old boys to achieve the current coverage for girls would not be cost-effective, at US$61,400/QALY gained (95% UI $29,700 to $112,000; OECD purchasing power parities) compared to the current girls-only program, with an assumed vaccine cost of US$59 (NZ$113). This was dominated though by the intensified girls-only program; US$17,400/QALY gained (95% UI: dominant to $46,100). Adding boys to this intensified program was also not cost-effective; US$128,000/QALY gained, 95% UI: $61,900 to $247,000).Vaccination of boys was not found to be cost-effective, even for additional scenarios with very low vaccine or program administration costs - only when combined vaccine and administration costs were NZ$125 or lower per dose was vaccination of boys cost-effective. These results suggest that

  12. Reverse engineering the physical chemistry of making Egyptian faience through compositional analysis of the cementation process

    Science.gov (United States)

    Pourattar, Parisa

    The cementation process of making Egyptian faience, reported by Hans Wulff from a workshop in Qom, Iran, has not been easy to replicate and various views have been set forth to understand the transport of materials from the glazing powder to the surfaces of the crushed quartz beads. Replications of the process fired to 950° C and under-fired to 850° C were characterized by electron beam microprobe analysis (EPMA), petrographic thin section analysis, and scanning electron microscopy with energy dispersive x-ray analysis (SEM-EDS). Chemical variations were modeled using thermal data, phase diagrams, and copper vaporization experiments. These replications were compared to 52 examples from various collections, including 20th century ethnographic collections of beads, glazing powder and plant ash, 12th century CE beads and glazing powder from Fustat (Old Cairo), Egypt, and to an earlier example from Abydos, Egypt in the New Kingdom and to an ash example from the Smithsonian Institution National Museum of Natural History.

  13. Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory; determination of 86 volatile organic compounds in water by gas chromatography/mass spectrometry, including detections less than reporting limits

    Science.gov (United States)

    Connor, Brooke F.; Rose, Donna L.; Noriega, Mary C.; Murtaugh, Lucinda K.; Abney, Sonja R.

    1998-01-01

    This report presents precision and accuracy data for volatile organic compounds (VOCs) in the nanogram-per-liter range, including aromatic hydrocarbons, reformulated fuel components, and halogenated hydrocarbons using purge and trap capillary-column gas chromatography/mass spectrometry. One-hundred-four VOCs were initially tested. Of these, 86 are suitable for determination by this method. Selected data are provided for the 18 VOCs that were not included. This method also allows for the reporting of semiquantitative results for tentatively identified VOCs not included in the list of method compounds. Method detection limits, method performance data, preservation study results, and blank results are presented. The authors describe a procedure for reporting low-concentration detections at less than the reporting limit. The nondetection value (NDV) is introduced as a statistically defined reporting limit designed to limit false positives and false negatives to less than 1 percent. Nondetections of method compounds are reported as ?less than NDV.? Positive detections measured at less than NDV are reported as estimated concentrations to alert the data user to decreased confidence in accurate quantitation. Instructions are provided for analysts to report data at less than the reporting limits. This method can support the use of either method reporting limits that censor detections at lower concentrations or the use of NDVs as reporting limits. The data-reporting strategy for providing analytical results at less than the reporting limit is a result of the increased need to identify the presence or absence of environmental contaminants in water samples at increasingly lower concentrations. Long-term method detection limits (LTMDLs) for 86 selected compounds range from 0.013 to 2.452 micrograms per liter (?g/L) and differ from standard method detection limits (MDLs) in that the LTMDLs include the long-term variance of multiple instruments, multiple operators, and multiple

  14. A combination of gefitinib and FOLFOX-4 as first-line treatment in advanced colorectal cancer patients. A GISCAD multicentre phase II study including a biological analysis of EGFR overexpression, amplification and NF-kB activation

    Science.gov (United States)

    Cascinu, S; Berardi, R; Salvagni, S; Beretta, G D; Catalano, V; Pucci, F; Sobrero, A; Tagliaferri, P; Labianca, R; Scartozzi, M; Crocicchio, F; Mari, E; Ardizzoni, A

    2007-01-01

    Interesting activity has been reported by combining chemotherapy with cetuximab. An alternative approach for blocking EGFR function has been the development of small-molecule inhibitors of tyrosine kinase domain such as gefitinib. We designed a multicentre phase II study in advanced colorectal cancer combining gefitinib+FOLFOX in order to determine the activity and to relate EGFR expression and gene amplification and NF-kB activation to therapeutic results. Patients received FOLFOX-4 regimen plus gefitinib as first-line treatment. Tumour samples were analysed for EGFR protein expression by immunohistochemical analysis and for EGFR gene amplification by fluorescence in situ hybridisation (FISH), chromogenic in situ hybridisation (CISH) and NF-kB activation. Forty-three patients were enrolled into this study; 15 patients experienced a partial response (response rate=34.9%), whereas other 12 (27.9%) had a stable disease. Median progression-free survival (PFS) was 7.8 months and median overall survival (OS) was 13.9 months. We did not find any relationship with EGFR overexpression, gene amplification, while NF-kB activation was associated with a resistance to therapy. Gefitinib does not seem to increase the activity of FOLFOX in advanced colorectal cancer even in patients overexpressing EGFR or with EGFR amplification. Furthermore, while NF-kB activation seems to predict resistance to chemotherapy as demonstrated ‘in vitro' models, gefitinib does not overcome this mechanism of resistance, as reported for cetuximab. PMID:18059397

  15. Theoretical study on molecular structure and vibrational analysis included FT-IR, FT-Raman and UV techniques of 2,4,5-trimethylbenzoic acid (monomer and dimer structures).

    Science.gov (United States)

    Karabacak, Mehmet; Bilgili, Sibel; Atac, Ahmet

    2015-01-05

    Theoretical study on the structural and vibrational analysis of monomer and dimer structures of 2,4,5-trimethylbenzoic acid (2,4,5-TMBA, C₁₀H₁₂O₂) were presented. The geometry of the molecule was fully optimized. The Fourier transform infrared (FT-IR) and the Fourier transform Raman (FT-Raman) spectra of the title molecule in solid phase were recorded in the region 4000-400 cm(-1) and 4000-50 cm(-1), respectively. The geometrical parameters and energies were investigated with the help of Density Functional Theory (DFT) employing B3LYP method and 6-311++G(d,p) basis set. The spectroscopic data of the molecule in the ground state were calculated by using DFT/B3LYP method with the 6-311++G(d,p) basis set. The vibrational spectra were calculated and fundamental vibrations were assigned on the basis of the potential energy distribution (PED) of the vibrational modes. The geometric parameters were compared with experimental data of the title molecule. The UV absorption spectrum of the studied compound was computed and recorded in the range of 190-400 nm dissolved in water and ethanol. Besides, charge transfer occurring in the molecule between HOMO and LUMO energies, frontier energy gap, molecular electrostatic potential (MEP) were calculated and presented. In addition these, thermodynamic properties and Mulliken atomic charges were performed. Copyright © 2014 Elsevier B.V. All rights reserved.

  16. Organic-Carbon Sequestration in Soil/Sediment of the Mississippi River Deltaic Plain - Data; Landscape Distribution, Storage, and Inventory; Accumulation Rates; and Recent Loss, Including a Post-Katrina Preliminary Analysis (Chapter B)

    Science.gov (United States)

    Markewich, Helaine W.; Buell, Gary R.; Britsch, Louis D.; McGeehin, John P.; Robbins, John A.; Wrenn, John H.; Dillon, Douglas L.; Fries, Terry L.; Morehead, Nancy R.

    2007-01-01

    Soil/sediment of the Mississippi River deltaic plain (MRDP) in southeastern Louisiana is rich in organic carbon (OC). The MRDP contains about 2 percent of all OC in the surface meter of soil/sediment in the Mississippi River Basin (MRB). Environments within the MRDP differ in soil/sediment organic carbon (SOC) accumulation rate, storage, and inventory. The focus of this study was twofold: (1) develop a database for OC and bulk density for MRDP soil/sediment; and (2) estimate SOC storage, inventory, and accumulation rates for the dominant environments (brackish, intermediate, and fresh marsh; natural levee; distributary; backswamp; and swamp) in the MRDP. Comparative studies were conducted to determine which field and laboratory methods result in the most accurate and reproducible bulk-density values for each marsh environment. Sampling methods included push-core, vibracore, peat borer, and Hargis1 sampler. Bulk-density data for cores taken by the 'short push-core method' proved to be more internally consistent than data for samples collected by other methods. Laboratory methods to estimate OC concentration and inorganic-constituent concentration included mass spectrometry, coulometry, and loss-on-ignition. For the sampled MRDP environments, these methods were comparable. SOC storage was calculated for each core with adequate OC and bulk-density data. SOC inventory was calculated using core-specific data from this study and available published and unpublished pedon data linked to SSURGO2 map units. Sample age was estimated using isotopic cesium (137Cs), lead (210Pb), and carbon (14C), elemental Pb, palynomorphs, other stratigraphic markers, and written history. SOC accumulation rates were estimated for each core with adequate age data. Cesium-137 profiles for marsh soil/sediment are the least ambiguous. Levee and distributary 137Cs profiles show the effects of intermittent allochthonous input and/or sediment resuspension. Cesium-137 and 210Pb data gave the most

  17. Numerical efficiency calibration of in vivo measurement systems. Monte Carlo simulations of in vivo measurement scenarios for the detection of incorporated radionuclides, including validation, analysis of efficiency-sensitive parameters and customized anthropomorphic voxel models

    International Nuclear Information System (INIS)

    Hegenbart, Lars

    2010-01-01

    Detector efficiency calibration of in vivo bioassay measurements is based on physical anthropomorphic phantoms that can be loaded with radionuclides of the suspected incorporation. Systematic errors of traditional calibration methods can cause considerable over- or underestimation of the incorporated activity and hence the absorbed dose in the human body. In this work Monte Carlo methods for radiation transport problem are used. Virtual models of the in vivo measurement equipment used at the Institute of Radiation Research, including detectors and anthropomorphic phantoms have been developed. Software tools have been coded to handle memory intensive human models for the visualization, preparation and evaluation of simulations of in vivo measurement scenarios. The used tools, methods, and models have been validated. Various parameters have been investigated for their sensitivity on the detector efficiency to identify and quantify possible systematic errors. Measures have been implemented to improve the determination of the detector efficiency in regard to apply them in the routine of the in vivo measurement laboratory of the institute. A positioning system has been designed and installed in the Partial Body Counter measurement chamber to measure the relative position of the detector to the test person, which has been identified to be a sensitive parameter. A computer cluster has been set up to facilitate the Monte Carlo simulations and reduce computing time. Methods based on image registration techniques have been developed to transform existing human models to match with an individual test person. The measures and methods developed have improved the classic detector efficiency methods successfully. (orig.)

  18. Global miRNA expression analysis of serous and clear cell ovarian carcinomas identifies differentially expressed miRNAs including miR-200c-3p as a prognostic marker

    International Nuclear Information System (INIS)

    Vilming Elgaaen, Bente; Olstad, Ole Kristoffer; Haug, Kari Bente Foss; Brusletto, Berit; Sandvik, Leiv; Staff, Anne Cathrine; Gautvik, Kaare M; Davidson, Ben

    2014-01-01

    Improved insight into the molecular characteristics of the different ovarian cancer subgroups is needed for developing a more individualized and optimized treatment regimen. The aim of this study was to a) identify differentially expressed miRNAs in high-grade serous ovarian carcinoma (HGSC), clear cell ovarian carcinoma (CCC) and ovarian surface epithelium (OSE), b) evaluate selected miRNAs for association with clinical parameters including survival and c) map miRNA-mRNA interactions. Differences in miRNA expression between HGSC, CCC and OSE were analyzed by global miRNA expression profiling (Affymetrix GeneChip miRNA 2.0 Arrays, n = 12, 9 and 9, respectively), validated by RT-qPCR (n = 35, 19 and 9, respectively), and evaluated for associations with clinical parameters. For HGSC, differentially expressed miRNAs were linked to differentially expressed mRNAs identified previously. Differentially expressed miRNAs (n = 78) between HGSC, CCC and OSE were identified (FDR < 0.01%), of which 18 were validated (p < 0.01) using RT-qPCR in an extended cohort. Compared with OSE, miR-205-5p was the most overexpressed miRNA in HGSC. miR-200 family members and miR-182-5p were the most overexpressed in HGSC and CCC compared with OSE, whereas miR-383 was the most underexpressed. miR-205-5p and miR-200 members target epithelial-mesenchymal transition (EMT) regulators, apparently being important in tumor progression. miR-509-3-5p, miR-509-5p, miR-509-3p and miR-510 were among the strongest differentiators between HGSC and CCC, all being significantly overexpressed in CCC compared with HGSC. High miR-200c-3p expression was associated with poor progression-free (p = 0.031) and overall (p = 0.026) survival in HGSC patients. Interacting miRNA and mRNA targets, including those of a TP53-related pathway presented previously, were identified in HGSC. Several miRNAs differentially expressed between HGSC, CCC and OSE have been identified, suggesting a carcinogenetic role for these mi

  19. Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory; determination of the total phosphorus by a Kjeldahl digestion method and an automated colorimetric finish that includes dialysis

    Science.gov (United States)

    Patton, Charles J.; Truitt, Earl P.

    1992-01-01

    A method to determine total phosphorus (TP) in the same digests prepared for total Kjeldahl nitrogen (TKN) determinations is desribed. The batch, high-temperature (block digester), HG(II)-catalyzed digestion step is similar to U.S. Geological Survey methods I-2552-85/I-4552-85 and U.S. Environmental Protection Agency method 365.4 except that sample and reagent volumes are halved. Prepared digests are desolvated at 220 degrees Celsius and digested at 370 degrees Celsius in separate block digesters set at these temperatures, rather than in a single, temperature-programmed block digester. This approach is used in the method escribed here, which permits 40 calibrants, reference waters, and smaples to be digested and resolvated in about an hour. Orthophosphate ions originally present in samples, along with those released during the digestion step, are determined colorimetrically at a rate of 90 tests per hour by an automated version of the phosphoantimonylmolybdenum blue procedure. About 100 microliters of digest are required per determination. The upper concentration limit is 2 milligrams per liter (mg/L) with a method detection limt of 0.01 mg/L. Repeatability for a sample containing approximately 1.6 mg/L of TP in a high suspended-solids matrix is 0.7 percent. Between-day precision for the same sample is 5.0 percent. A dialyzer in the air-segmented continuous flow analyzer provides on-line digest cleanup, eliminated particulates that otherwise would interfere in the colorimetric finish. An single-channel analyzer can process the resolvated digests from two pairs of block digesters each hour. Paired t-test analysis of TP concentrations for approximately 1,600 samples determined by the new method (U.S. Geologial Survey methods I-2610-91 and I-4610-91) and the old method (U.S. Geological Survey methods I-2600-85 and I-4600-85) revealed positive bias in the former of 0.02 to 0.04 mg/L for surface-water samples in agreement with previous studies. Concentrations of total

  20. Analysis

    DEFF Research Database (Denmark)

    Mathiesen, Brian Vad; Liu, Wen; Zhang, Xiliang

    2014-01-01

    three major technological changes: energy savings on the demand side, efficiency improvements in energy production, and the replacement of fossil fuels by various sources of renewable energy. Consequently, the analysis of these systems must include strategies for integrating renewable sources...

  1. Cutaneous hidradenocarcinoma: a clinicopathological, immunohistochemical, and molecular biologic study of 14 cases, including Her2/neu gene expression/amplification, TP53 gene mutation analysis, and t(11;19) translocation.

    Science.gov (United States)

    Kazakov, Dmitry V; Ivan, Doina; Kutzner, Heinz; Spagnolo, Dominic V; Grossmann, Petr; Vanecek, Tomas; Sima, Radek; Kacerovska, Denisa; Shelekhova, Ksenia V; Denisjuk, Natalja; Hillen, Uwe; Kuroda, Naoto; Mukensnabl, Petr; Danis, Dusan; Michal, Michal

    2009-05-01

    We present a series of 14 cases of cutaneous hidradenocarcinomas. The patients included 6 women and 8 men ranging in age at diagnosis from 34 to 93 years. All but 1 patient presented with a solitary nodule. There was no predilection site. One patient presented with multiple lesions representing metastatic nodules. Of 12 patients with available follow-up, 2 died of disease, whereas the remaining 10 patients were alive but 3 of them experienced a local recurrence in the course of the disease. Grossly, the tumors ranged in size from 1.2 to 6 cm. Microscopically, of the 14 primary tumors, 9 showed low-grade cytomorphology, whereas the remaining 5 neoplasms were high-grade lesions. The residuum of a hidradenoma was present in 5 of the 14 primaries. The mitotic rate was highly variable, ranging from 2 to 64 mitoses per 10 high-power field. The cellular composition of the tumors varied slightly, with clear cells, epidermoid cells, and transitional forms being present in each case. In 1 case, there was metaplastic transformation into sarcomatoid carcinoma. Glandular differentiation varied from case to case and appeared most commonly as simple round glands or as cells with intracytoplasmic lumens. Necrosis en masse was detected in 8 specimens. One specimen represented a reexcision and was unusual as it showed a well-demarcated intradermal proliferation of relatively bland clear cells accompanied by an overlying intraepidermal growth of clear cells resembling hidradenoacanthoma simplex. Despite the bland appearance, the tumor metastasized to a lymph node. Immunohistochemically, 5 of the 8 specimens studied for Her2/neu expression were negative, whereas 3 specimens from 2 cases yielded score +2, but all the 3 specimens with score 2+ subsequently proved negative for Her2/neu gene amplification by fluorescence in situ hybridization. Of 10 primaries studied, 4 tumors showed positive p53 immunoreaction in more than 25% of the cells comprising the malignant portion of the lesions

  2. Should Broca's area include Brodmann area 47?

    Science.gov (United States)

    Ardila, Alfredo; Bernal, Byron; Rosselli, Monica

    2017-02-01

    Understanding brain organization of speech production has been a principal goal of neuroscience. Historically, brain speech production has been associated with so-called Broca’s area (Brodmann area –BA- 44 and 45), however, modern neuroimaging developments suggest speech production is associated with networks rather than with areas. The purpose of this paper was to analyze the connectivity of BA47 ( pars orbitalis) in relation to language . A meta-analysis was conducted to assess the language network in which BA47 is involved. The Brainmap database was used. Twenty papers corresponding to 29 experimental conditions with a total of 373 subjects were included. Our results suggest that BA47 participates in a “frontal language production system” (or extended Broca’s system). The BA47  connectivity found is also concordant with a minor role in language semantics. BA47 plays a central role in the language production system.

  3. CERN Technical Training: LABVIEW courses include RADE

    CERN Multimedia

    HR Department

    2009-01-01

    The contents of the "LabView Basic I" and "LabView Intermediate II" courses have recently been changed to include, respectively, an introduction to and expert training in the Rapid Application Development Environment (RADE). RADE is a LabView-based application developed at CERN to integrate LabView in the accelerator and experiment control infrastructure. It is a suitable solution to developing expert tools, machine development analysis and independent test facilities. The course names have also been changed to "LabVIEW Basics I with RADE Introduction" and "LabVIEW Intermediate II with Advanced RADE Application". " LabVIEW Basics I with RADE Introduction" is designed for: Users preparing to develop applications using LabVIEW, or NI Developer Suite; users and technical managers evaluating LabVIEW or NI Developer Suite in purchasing decisions; users pursuing the Certified LabVIEW Developer certification. The course pr...

  4. CERN Technical Training: LABVIEW courses include RADE

    CERN Multimedia

    HR Department

    2009-01-01

    The contents of "LabView Basic I" and "LabView Intermediate II" trainings have been recently changed to include, respectively, an introduction and an expert training on the Rapid Application Development Environment (RADE). RADE is a LabView-based application developed at CERN to integrate LabView in the accelerator and experiment control infrastructure. It is a suitable solution to develop expert tools, machine development analysis and independent test facilities. The course names have also been changed to "LabVIEW Basics I with RADE Introduction" and "LabVIEW Intermediate II with Advanced RADE Application". " LabVIEW Basics I with RADE Introduction" is designed for: Users preparing to develop applications using LabVIEW, or NI Developer Suite; users and technical managers evaluating LabVIEW or NI Developer Suite in purchasing decisions; users pursuing the Certified LabVIEW Developer certification. The course prepare...

  5. CERN Technical Training: LABVIEW courses include RADE

    CERN Multimedia

    HR Department

    2009-01-01

    The contents of the "LabView Basic I" and "LabView Intermediate II" courses have recently been changed to include, respectively, an introduction to and expert training in the Rapid Application Development Environment (RADE). RADE is a LabView-based application developed at CERN to integrate LabView in the accelerator and experiment control infrastructure. It is a suitable solution to developing expert tools, machine development analysis and independent test facilities. The course names have also been changed to "LabVIEW Basics I with RADE Introduction" and "LabVIEW Intermediate II with Advanced RADE Application". " LabVIEW Basics I with RADE Introduction" is designed for: Users preparing to develop applications using LabVIEW, or NI Developer Suite; users and technical managers evaluating LabVIEW or NI Developer Suite in purchasing decisions; users pursuing the Certified LabVIEW Developer certification. The course prepares participants to develop test and measurement, da...

  6. Harmonics and voltage stability analysis in power systems including ...

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    1. Introduction. It is not only required to meet the demand for electrical energy but also to improve its quality. .... It is necessary to pay attention to energy system stability in the planning, management, and control of electrical ... where k ∈ {m, m + 1,... ,n} and n is total number of the buses in the system. F(h) r,k and F(h) i,k.

  7. Pulmonary nodule characterization, including computer analysis and quantitative features.

    Science.gov (United States)

    Bartholmai, Brian J; Koo, Chi Wan; Johnson, Geoffrey B; White, Darin B; Raghunath, Sushravya M; Rajagopalan, Srinivasan; Moynagh, Michael R; Lindell, Rebecca M; Hartman, Thomas E

    2015-03-01

    Pulmonary nodules are commonly detected in computed tomography (CT) chest screening of a high-risk population. The specific visual or quantitative features on CT or other modalities can be used to characterize the likelihood that a nodule is benign or malignant. Visual features on CT such as size, attenuation, location, morphology, edge characteristics, and other distinctive "signs" can be highly suggestive of a specific diagnosis and, in general, be used to determine the probability that a specific nodule is benign or malignant. Change in size, attenuation, and morphology on serial follow-up CT, or features on other modalities such as nuclear medicine studies or MRI, can also contribute to the characterization of lung nodules. Imaging analytics can objectively and reproducibly quantify nodule features on CT, nuclear medicine, and magnetic resonance imaging. Some quantitative techniques show great promise in helping to differentiate benign from malignant lesions or to stratify the risk of aggressive versus indolent neoplasm. In this article, we (1) summarize the visual characteristics, descriptors, and signs that may be helpful in management of nodules identified on screening CT, (2) discuss current quantitative and multimodality techniques that aid in the differentiation of nodules, and (3) highlight the power, pitfalls, and limitations of these various techniques.

  8. Harmonics and voltage stability analysis in power systems including ...

    Indian Academy of Sciences (India)

    These non-sinusoidal quantities can create serious harmonic distortions in transmission and distribution systems. In this paper, harmonic generation of a static VAR compensator with thyristor-controlled reactor and effects of the harmonics on steady-state voltage stability are examined for various operational conditions.

  9. Handbook of Modeling for Circuit Analysis Including Radiation Effects

    Science.gov (United States)

    1979-05-01

    Gererally, a single value of r’ oetween. rCSAT ,nd r3 is chosen.C,;ORMAL 1, "- OPE - r- r CNORPIAL#, CSAT / IC VCE Figure Iii-22. Method of DPtrrmiring rc III...integrated circuit testers or from custom teAt apparatus such as described in appendix 3 of reference VI-7. 1) Offset Voltage- a) By Measurement Offset voltage

  10. Harmonics and voltage stability analysis in power systems including

    Indian Academy of Sciences (India)

    In this study, non-sinusoidal quantities and voltage stability, both known as power quality criteria, are examined together in detail. The widespread use of power electronics elements cause the existence of significant non-sinusoidal quantities in the system. These non-sinusoidal quantities can create serious harmonic ...

  11. Harmonics and voltage stability analysis in power systems including ...

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Abstract. In this study, non-sinusoidal quantities and voltage stability, both known as power quality criteria, are examined together in detail. The widespread use of power electronics elements cause the existence of significant non-sinusoidal quantities in the system. These non-sinusoidal quantities can create serious har-.

  12. Thermal analysis of externally pressurised step bearing including ...

    African Journals Online (AJOL)

    A numerical study has been done for externally pressurized circular step thrust bearing lubricated with incompressible fluid with finely dispersed air bubbles taking into consideration the variation in lubricant physical properties due to temperature and pressure variation in the fluid film. Effect of misalignment / tilt and coning ...

  13. Application of the X-ray fluorescence analysis and X-ray diffraction in geochemical studies of the Pleistocene tills from Holy Cross Mountains

    Science.gov (United States)

    Kubala-Kukuś, A.; Ludwikowska-Kȩdzia, M.; Banaś, D.; Braziewicz, J.; Majewska, U.; Pajek, M.; Wudarczyk-Moćko, J.

    2013-12-01

    X-ray fluorescence analysis methods (wavelength dispersive X-ray fluorescence analysis (WDXRF) and total reflection X-ray fluorescence (TXRF)) and X-ray powder diffraction (XRPD) have been applied in complementary geochemical studies of the Pleistocene till samples. The XRPD technique gave information about the mineral composition of the analyzed samples while the WDXRF and TXRF studies allowed the fast elemental analysis. The till samples were collected from different regions of Holy Cross Mountains (located in central Poland) which are still not unambiguously described in the context of the geochemical studies of the Quaternary sediments. The analysis was concentrated on the geochemical composition of the till samples both for materials occurring on the surface (characterized by continuous weathering processes) and for samples taken from core borehole. The overriding purpose of these studies is determination of the local lithotype of the tills and its lithologic and petrographic diagnostic properties, including the chemical composition of clay and minerals found in the clay. In the presented work the experimental sets up, sample preparation procedure and measurements programme will be discussed in details. Finally, the elemental and mineral compositions will be presented for studied different groups of the samples.

  14. Including gauge corrections to thermal leptogenesis

    International Nuclear Information System (INIS)

    Huetig, Janine

    2013-01-01

    . Furthermore, we have computed the Majorana neutrino production rate itself in chapter 6 to test our numerical procedure. In this context we have calculated the tree-level result as well as the gauge corrected result for the Majorana neutrino production rate. Finally in chapter 7, we have implemented the Majorana neutrino ladder rung diagram into our setup for leptogenesis: As a first consideration, we have collected all gauge corrected diagrams up to three-loop order for the asymmetry-causing two-loop diagrams. However, the results of chap. 5 showed that it is not sufficient to just include diagrams up to three-loop level. Due to the necessity of resumming all n-loop diagrams, we have constructed a cylindrical diagram that fulfils this condition. This diagram is the link between the Majorana neutrino ladder rung diagram calculated before on the one hand and the lepton asymmetry on the other. Therefore we have been able to derive a complete expression for the integrated lepton number matrix including all leading order corrections. The numerical analysis of this lepton number matrix needs a great computational effort since for the resulting eight-dimensional integral two ordinary differential equations have to be computed for each point the routine evaluates. Thus the result remains yet inaccessible. Research perspectives: Summarising, this thesis provides the basis for a systematic inclusion of gauge interactions in thermal leptogenesis scenarios. As a next step, one should evaluate the expression for the integrated lepton number numerically to gain a value, which can be used for comparison to earlier results such as the solutions of the Boltzmann equations as well as the Kadanoff-Baym ansatz with the implemented Standard Model widths. This numerical result would be the first quantitative number, which contains leading order corrections due to all interactions of the Majorana neutrino with the Standard Model particles. Further corrections by means of including washout effects

  15. SEEPAGE MODEL FOR PA INCLUDING DRIFT COLLAPSE

    International Nuclear Information System (INIS)

    C. Tsang

    2004-01-01

    The purpose of this report is to document the predictions and analyses performed using the seepage model for performance assessment (SMPA) for both the Topopah Spring middle nonlithophysal (Tptpmn) and lower lithophysal (Tptpll) lithostratigraphic units at Yucca Mountain, Nevada. Look-up tables of seepage flow rates into a drift (and their uncertainty) are generated by performing numerical simulations with the seepage model for many combinations of the three most important seepage-relevant parameters: the fracture permeability, the capillary-strength parameter 1/a, and the percolation flux. The percolation flux values chosen take into account flow focusing effects, which are evaluated based on a flow-focusing model. Moreover, multiple realizations of the underlying stochastic permeability field are conducted. Selected sensitivity studies are performed, including the effects of an alternative drift geometry representing a partially collapsed drift from an independent drift-degradation analysis (BSC 2004 [DIRS 166107]). The intended purpose of the seepage model is to provide results of drift-scale seepage rates under a series of parameters and scenarios in support of the Total System Performance Assessment for License Application (TSPA-LA). The SMPA is intended for the evaluation of drift-scale seepage rates under the full range of parameter values for three parameters found to be key (fracture permeability, the van Genuchten 1/a parameter, and percolation flux) and drift degradation shape scenarios in support of the TSPA-LA during the period of compliance for postclosure performance [Technical Work Plan for: Performance Assessment Unsaturated Zone (BSC 2002 [DIRS 160819], Section I-4-2-1)]. The flow-focusing model in the Topopah Spring welded (TSw) unit is intended to provide an estimate of flow focusing factors (FFFs) that (1) bridge the gap between the mountain-scale and drift-scale models, and (2) account for variability in local percolation flux due to

  16. Resection of thymoma should include nodal sampling.

    Science.gov (United States)

    Weksler, Benny; Pennathur, Arjun; Sullivan, Jennifer L; Nason, Katie S

    2015-03-01

    Thymoma is best treated by surgical resection; however, no clear guidelines have been created regarding lymph node sampling at the time of resection. Additionally, the prognostic implications of nodal metastases are unclear. The aim of this study was to analyze the prognostic implications of nodal metastases in thymoma. The Surveillance, Epidemiology, and End Results database was queried for patients who underwent surgical resection of thymoma with documented pathologic examination of lymph nodes. The impact of nodal status on survival and thymoma staging was examined. We identified 442 patients who underwent thymoma resection with pathologic evaluation of 1 or more lymph nodes. A median of 2 nodes were sampled per patient. Fifty-nine patients (59 of 442, 13.3%) had ≥ 1 positive node. Patients with positive nodes were younger and had smaller tumors than node-negative patients. Median survival in the node-positive patients was 98 months, compared with 144 months in node-negative patients (P = .013). In multivariable analysis, the presence of positive nodes had a significant, independent, adverse impact on survival (hazard ratio 1.945, 95% confidence interval 1.296-2.919, P = .001). The presence of nodal metastases resulted in a change in classification to a higher stage in 80% of patients, the majority from Masaoka-Koga stage III to stage IV. Nodal status seems to be an important prognostic factor in patients with thymoma. Until the prognostic significance of nodal metastases is better understood, surgical therapy for thymoma should include sampling of regional lymph nodes. Copyright © 2015 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

  17. Control Structure of Garba Formation Through Petrography Analysis in Tanjung Beringin, South OKU Regency, South Sumatra

    Directory of Open Access Journals (Sweden)

    Ridho Widyantama Putra

    2016-12-01

    Full Text Available The study area is the village of Tanjung Beringin carefully situations, South OKU Regency, which is included within the Subpalembang Basin  with the dominant lithology is granite. Granite in this area has a diversity of grain size and mineral composition, in the southern part of the study area the size of the mineral feldspar is greater than the granite in the northern part, where the granite in this section contains plagioclase and quartz dominant, and it was bigger than the other minerals, Granite on the area carefully situations are the result of the appointment that occurs due to the compression phase at the end of the Late Jurassic until Late Cretaceous. Fracture growing on granite have a general direction Northeast equivalent to tectonic compression Miocene - Now, the presence of other directional sharpness is secondary sharpness formed by the collision between the rocks. Fractures that develops is the path where the discharge of magma to the formation of granite with different characteristics. In petrographic analysis porphyritic texture is thriving and there are indications of alteration process in the presence of alteration minerals such as chlorite and quartz vein.

  18. Paleogeographic evolution of carbonate reservoirs: geological and geophysical analysis at the Albian Campos Basin, Brazil

    Science.gov (United States)

    Castillo Vincentelli, Maria Gabriela; Favoreto, Julia; Roemers-Oliveira, Eduardo

    2018-02-01

    An integrated geophysical and geological analysis of a carbonate reservoir can offer an effective method to better understand the paleogeographical evolution and distribution of a geological reservoir and non-reservoir facies. Therefore, we propose a better method for obtaining geological facies from geophysical facies, helping to characterize the permo-porous system of this kind of play. The goal is to determine the main geological phases from a specific hydrocarbon producer (Albian Campos Basin, Brazil). The applied method includes the use of a petrographic and qualitative description from the integrated reservoir with seismic interpretation of an attribute map (energy, root mean square, mean amplitude, maximum negative amplitude, etc), all calculated at the Albian level for each of the five identified phases. The studied carbonate reservoir is approximately 6 km long with a main direction of NE-SW, and it was sub-divided as follows (from bottom to top): (1) the first depositional sequence of the bank was composed mainly of packstone, indicating that the local structure adjacent to the main bank is protected from environmental conditions; (2) characterized by the presence of grainstone developed at the higher structure; (3) the main sequence of the peloidal packstone with mudstones oncoids; (4) corresponds to the oil production of carbonate reservoirs formed by oolitic grainstone deposited at the top of the carbonate bank; at this phase, rising sea levels formed channels that connected the open sea shelf with the restricted circulation shelf; and (5) mudstone and wackestone represent the system’s flooding phase.

  19. Article Including Environmental Barrier Coating System

    Science.gov (United States)

    Lee, Kang N. (Inventor)

    2015-01-01

    An enhanced environmental barrier coating for a silicon containing substrate. The enhanced barrier coating may include a bond coat doped with at least one of an alkali metal oxide and an alkali earth metal oxide. The enhanced barrier coating may include a composite mullite bond coat including BSAS and another distinct second phase oxide applied over said surface.

  20. Rare thoracic cancers, including peritoneum mesothelioma

    NARCIS (Netherlands)

    Siesling, Sabine; van der Zwan, Jan Maarten; Izarzugaza, Isabel; Jaal, Jana; Treasure, Tom; Foschi, Roberto; Ricardi, Umberto; Groen, Harry; Tavilla, Andrea; Ardanaz, Eva

    Rare thoracic cancers include those of the trachea, thymus and mesothelioma (including peritoneum mesothelioma). The aim of this study was to describe the incidence, prevalence and survival of rare thoracic tumours using a large database, which includes cancer patients diagnosed from 1978 to 2002,

  1. Rare thoracic cancers, including peritoneum mesothelioma

    NARCIS (Netherlands)

    Siesling, Sabine; Zwan, J.M.V.D.; Izarzugaza, I.; Jaal, J.; Treasure, T.; Foschi, R.; Ricardi, U.; Groen, H.; Tavilla, A.; Ardanaz, E.

    2012-01-01

    Rare thoracic cancers include those of the trachea, thymus and mesothelioma (including peritoneum mesothelioma). The aim of this study was to describe the incidence, prevalence and survival of rare thoracic tumours using a large database, which includes cancer patients diagnosed from 1978 to 2002,

  2. Composite Pressure Vessel Including Crack Arresting Barrier

    Science.gov (United States)

    DeLay, Thomas K. (Inventor)

    2013-01-01

    A pressure vessel includes a ported fitting having an annular flange formed on an end thereof and a tank that envelopes the annular flange. A crack arresting barrier is bonded to and forming a lining of the tank within the outer surface thereof. The crack arresting barrier includes a cured resin having a post-curing ductility rating of at least approximately 60% through the cured resin, and further includes randomly-oriented fibers positioned in and throughout the cured resin.

  3. Including Organizational Cultural Parameters in Work Processes

    National Research Council Canada - National Science Library

    Handley, Holly A; Heacox, Nancy J

    2004-01-01

    .... In order to represent the organizational impact on the work process, five organizational cultural parameters were identified and included in an algorithm for modeling and simulation of cultural...

  4. Haemophilus influenzae Disease (Including Hib) Symptoms

    Science.gov (United States)

    ... Links Global Hib Vaccination Hib Vaccination Meningitis Pneumonia Sepsis ... Haemophilus influenzae , including H. influenzae type b or Hib, can cause many different kinds of infections . Symptoms depend on ...

  5. The Byzantine ceramics from Pergamon excavations. Characterization of local and imported productions by elementary analysis using PIXE and INAA methods and by petrography

    International Nuclear Information System (INIS)

    Waksman, S.Y.

    1995-01-01

    An important ceramics material dated back to the 12th-14th centuries has been excavated in Pergamon (Turkey). Among these findings, wasters, tripod stilts and unfinished ware attest to local production in the Byzantine period. Elemental analysis by the methods PIXE (Particle Induced X-ray Emission) and INAA (Instrumental Neutron Activation Analysis) has been performed on a representative sampling of 160 sherds, including attested local material. Multivariate statistical techniques were used to classify the sherds into groups of similar composition and thus to distinguish ceramics made in Pergamon from imported wares. Several groups of local production have been constituted, which correspond to wares differing in date and fabric. The geochemical characterization of the pastes, complemented with petrographical and mineralogical data, shows that specific raw materials have been used to manufacture each ware. The analytical data related to ceramics made in Pergamon will serve as reference data for future provenance studies. Such reference groups of Byzantine ceramics are very rare, and therefore the ceramics imported into Pergamon cannot be attributed as to their origin. Among the ceramics widely diffused in the Byzantine world, some importations belonging to the ''fine sgraffito'' and ''Zeuxippus ware'' types have been identified. The latter type has been a source of stylistic influence for the workshops of Pergamon, since the analyses show that imitated ''Zeuxippus ware'' has been produced there. These imitations were probably themselves diffused on a regional scale. (author). 238 refs., 48 figs., 53 tabs., 22 photos., 8 appends

  6. The surgery of peripheral nerves (including tumors)

    DEFF Research Database (Denmark)

    Fugleholm, Kåre

    2013-01-01

    Surgical pathology of the peripheral nervous system includes traumatic injury, entrapment syndromes, and tumors. The recent significant advances in the understanding of the pathophysiology and cellular biology of peripheral nerve degeneration and regeneration has yet to be translated into improved...

  7. Including Indigenous Minorities in Decision-Making

    DEFF Research Database (Denmark)

    Pristed Nielsen, Helene

    Based on theories of public sphere participation and deliberative democracy, this book presents empirical results from a study of experiences with including Aboriginal and Maori groups in political decision-making in respectively Western Australia and New Zealand...

  8. Lung Disease Including Asthma and Adult Vaccination

    Science.gov (United States)

    ... Diseases Resources Lung Disease including Asthma and Adult Vaccination Language: English (US) Español (Spanish) Recommend on Facebook ... more about health insurance options. Learn about adult vaccination and other health conditions Asplenia Diabetes Heart Disease, ...

  9. Births and deaths including fetal deaths

    Data.gov (United States)

    U.S. Department of Health & Human Services — Access to a variety of United States birth and death files including fetal deaths: Birth Files, 1968-2009; 1995-2005; Fetal death file, 1982-2005; Mortality files,...

  10. Modernizing Agrifood Markets : Including Small Producers in ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Researchers will carry out an analysis of production and market conditions in the fresh fruit and vegetable, dairy and (in one case) beef, and chicken sectors in a selected province or district of each country. Against this baseline data, ... Institution. International Institute for Environment and Development. Pays d' institution.

  11. Isolators Including Main Spring Linear Guide Systems

    Science.gov (United States)

    Goold, Ryan (Inventor); Buchele, Paul (Inventor); Hindle, Timothy (Inventor); Ruebsamen, Dale Thomas (Inventor)

    2017-01-01

    Embodiments of isolators, such as three parameter isolators, including a main spring linear guide system are provided. In one embodiment, the isolator includes first and second opposing end portions, a main spring mechanically coupled between the first and second end portions, and a linear guide system extending from the first end portion, across the main spring, and toward the second end portion. The linear guide system expands and contracts in conjunction with deflection of the main spring along the working axis, while restricting displacement and rotation of the main spring along first and second axes orthogonal to the working axis.

  12. Electrochemical cell structure including an ionomeric barrier

    Science.gov (United States)

    Lambert, Timothy N.; Hibbs, Michael

    2017-06-20

    An apparatus includes an electrochemical half-cell comprising: an electrolyte, an anode; and an ionomeric barrier positioned between the electrolyte and the anode. The anode may comprise a multi-electron vanadium phosphorous alloy, such as VP.sub.x, wherein x is 1-5. The electrochemical half-cell is configured to oxidize the vanadium and phosphorous alloy to release electrons. A method of mitigating corrosion in an electrochemical cell includes disposing an ionomeric barrier in a path of electrolyte or ion flow to an anode and mitigating anion accumulation on the surface of the anode.

  13. Electric Power Monthly, August 1990. [Glossary included

    Energy Technology Data Exchange (ETDEWEB)

    1990-11-29

    The Electric Power Monthly (EPM) presents monthly summaries of electric utility statistics at the national, Census division, and State level. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. Data includes generation by energy source (coal, oil, gas, hydroelectric, and nuclear); generation by region; consumption of fossil fuels for power generation; sales of electric power, cost data; and unusual occurrences. A glossary is included.

  14. Diversification of Smallholder Tobacco Systems to include ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Tobacco is the mainstay of the economy of Malawi, accounting for over 70% of export earnings. Of the 100 000 members of the National Smallholder Farmers' Association of Malawi (NASFAM), 60% rely on tobacco for their sole source of income. Like their counterparts elsewhere, they face many difficulties, including: ...

  15. BIOLOGIC AND ECONOMIC EFFECTS OF INCLUDING DIFFERENT ...

    African Journals Online (AJOL)

    The biologic and economic effects of including three agro-industrial by-products as ingredients in turkey poult diets were investigated using 48 turkey poults in a completely randomised design experiment. Diets were formulated to contain the three by-products – wheat offal, rice husk and palm kernel meal, each at 20% level ...

  16. Extending flood damage assessment methodology to include ...

    African Journals Online (AJOL)

    Optimal and sustainable flood plain management, including flood control, can only be achieved when the impacts of flood control measures are considered for both the man-made and natural environments, and the sociological aspects are fully considered. Until now, methods/models developed to determine the influences ...

  17. Including Children Dependent on Ventilators in School.

    Science.gov (United States)

    Levine, Jack M.

    1996-01-01

    Guidelines for including ventilator-dependent children in school are offered, based on experience with six such students at a New York State school. Guidelines stress adherence to the medical management plan, the school-family partnership, roles of the social worker and psychologist, orientation, transportation, classroom issues, and steps toward…

  18. Musculoskeletal ultrasound including definitions for ultrasonographic pathology

    DEFF Research Database (Denmark)

    Wakefield, RJ; Balint, PV; Szkudlarek, Marcin

    2005-01-01

    Ultrasound (US) has great potential as an outcome in rheumatoid arthritis trials for detecting bone erosions, synovitis, tendon disease, and enthesopathy. It has a number of distinct advantages over magnetic resonance imaging, including good patient tolerability and ability to scan multiple joint...

  19. Modernizing Agrifood Markets : Including Small Producers in ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Against this baseline data, they will endeavor to identify success stories or examples of interventions that ensure small farmers' access to modernizing agrifood markets. The research will inform a set of policy recommendations to be promoted through policy platforms in a large number of developing countries, including but ...

  20. Including Students with Visual Impairments: Softball

    Science.gov (United States)

    Brian, Ali; Haegele, Justin A.

    2014-01-01

    Research has shown that while students with visual impairments are likely to be included in general physical education programs, they may not be as active as their typically developing peers. This article provides ideas for equipment modifications and game-like progressions for one popular physical education unit, softball. The purpose of these…

  1. Numerical simulation of spark ignition including ionization

    NARCIS (Netherlands)

    Thiele, M; Selle, S; Riedel, U; Warnatz, J; Maas, U

    2000-01-01

    A detailed understanding of the processes associated Midi spark ignition, as a first step during combustion, is of great importance fur clean operation of spark ignition engines. In the past 10 years. a growing concern for environmental protection, including low emission of pollutants, has increased

  2. An Integrated Biochemistry Laboratory, Including Molecular Modeling

    Science.gov (United States)

    Hall, Adele J. Wolfson Mona L.; Branham, Thomas R.

    1996-11-01

    ) experience with methods of protein purification; (iii) incorporation of appropriate controls into experiments; (iv) use of basic statistics in data analysis; (v) writing papers and grant proposals in accepted scientific style; (vi) peer review; (vii) oral presentation of results and proposals; and (viii) introduction to molecular modeling. Figure 1 illustrates the modular nature of the lab curriculum. Elements from each of the exercises can be separated and treated as stand-alone exercises, or combined into short or long projects. We have been able to offer the opportunity to use sophisticated molecular modeling in the final module through funding from an NSF-ILI grant. However, many of the benefits of the research proposal can be achieved with other computer programs, or even by literature survey alone. Figure 1.Design of project-based biochemistry laboratory. Modules (projects, or portions of projects) are indicated as boxes. Each of these can be treated independently, or used as part of a larger project. Solid lines indicate some suggested paths from one module to the next. The skills and knowledge required for protein purification and design are developed in three units: (i) an introduction to critical assays needed to monitor degree of purification, including an evaluation of assay parameters; (ii) partial purification by ion-exchange techniques; and (iii) preparation of a grant proposal on protein design by mutagenesis. Brief descriptions of each of these units follow, with experimental details of each project at the end of this paper. Assays for Lysozyme Activity and Protein Concentration (4 weeks) The assays mastered during the first unit are a necessary tool for determining the purity of the enzyme during the second unit on purification by ion exchange. These assays allow an introduction to the concept of specific activity (units of enzyme activity per milligram of total protein) as a measure of purity. In this first sequence, students learn a turbidimetric assay

  3. Photoactive devices including porphyrinoids with coordinating additives

    Science.gov (United States)

    Forrest, Stephen R; Zimmerman, Jeramy; Yu, Eric K; Thompson, Mark E; Trinh, Cong; Whited, Matthew; Diev, Vlacheslav

    2015-05-12

    Coordinating additives are included in porphyrinoid-based materials to promote intermolecular organization and improve one or more photoelectric characteristics of the materials. The coordinating additives are selected from fullerene compounds and organic compounds having free electron pairs. Combinations of different coordinating additives can be used to tailor the characteristic properties of such porphyrinoid-based materials, including porphyrin oligomers. Bidentate ligands are one type of coordinating additive that can form coordination bonds with a central metal ion of two different porphyrinoid compounds to promote porphyrinoid alignment and/or pi-stacking. The coordinating additives can shift the absorption spectrum of a photoactive material toward higher wavelengths, increase the external quantum efficiency of the material, or both.

  4. Electric power monthly, September 1990. [Glossary included

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-17

    The purpose of this report is to provide energy decision makers with accurate and timely information that may be used in forming various perspectives on electric issues. The power plants considered include coal, petroleum, natural gas, hydroelectric, and nuclear power plants. Data are presented for power generation, fuel consumption, fuel receipts and cost, sales of electricity, and unusual occurrences at power plants. Data are compared at the national, Census division, and state levels. 4 figs., 52 tabs. (CK)

  5. Power generation method including membrane separation

    Science.gov (United States)

    Lokhandwala, Kaaeid A.

    2000-01-01

    A method for generating electric power, such as at, or close to, natural gas fields. The method includes conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas by means of a membrane separation step. This step creates a leaner, sweeter, drier gas, which is then used as combustion fuel to run a turbine, which is in turn used for power generation.

  6. Should Trade Agreements Include Environmental Policy?

    OpenAIRE

    Josh Ederington

    2010-01-01

    This article examines the extent to which environmental and trade policies should be treated equally, or symmetrically, in international negotiations. It reviews the recent economics literature on trade and the environment to address two questions. First, should trade negotiations include negotiations over environmental policies and the setting of binding environmental standards? Second, if there are grounds for international environmental negotiations, should environmental agreements b...

  7. Jet-calculus approach including coherence effects

    International Nuclear Information System (INIS)

    Jones, L.M.; Migneron, R.; Narayanan, K.S.S.

    1987-01-01

    We show how integrodifferential equations typical of jet calculus can be combined with an averaging procedure to obtain jet-calculus-based results including the Mueller interference graphs. Results in longitudinal-momentum fraction x for physical quantities are higher at intermediate x and lower at large x than with the conventional ''incoherent'' jet calculus. These results resemble those of Marchesini and Webber, who used a Monte Carlo approach based on the same dynamics

  8. Revisiting Hansen Solubility Parameters by Including Thermodynamics.

    Science.gov (United States)

    Louwerse, Manuel J; Maldonado, Ana; Rousseau, Simon; Moreau-Masselon, Chloe; Roux, Bernard; Rothenberg, Gadi

    2017-11-03

    The Hansen solubility parameter approach is revisited by implementing the thermodynamics of dissolution and mixing. Hansen's pragmatic approach has earned its spurs in predicting solvents for polymer solutions, but for molecular solutes improvements are needed. By going into the details of entropy and enthalpy, several corrections are suggested that make the methodology thermodynamically sound without losing its ease of use. The most important corrections include accounting for the solvent molecules' size, the destruction of the solid's crystal structure, and the specificity of hydrogen-bonding interactions, as well as opportunities to predict the solubility at extrapolated temperatures. Testing the original and the improved methods on a large industrial dataset including solvent blends, fit qualities improved from 0.89 to 0.97 and the percentage of correct predictions rose from 54 % to 78 %. Full Matlab scripts are included in the Supporting Information, allowing readers to implement these improvements on their own datasets. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Evaluation of and quality assurance in HER2 analysis in breast carcinomas from patients registered in Danish Breast Cancer Group (DBCG) in the period of 2002-2006. A nationwide study including correlation between HER-2 status and other prognostic variables.

    Science.gov (United States)

    Rasmussen, Birgitte Bruun; Andersson, Michael; Christensen, Ib J; Møller, Susanne

    2008-01-01

    In Denmark, analysis for HER2 is situated in the pathology laboratories dealing with breast pathology. The analysis was introduced during the late 1990's, and was gradually intensified in the following years up to now. The present study deals with the experience with the analysis during the last 5 years, from 2002 - 2006. All patients, registered in DBCG (Danish Breast Cancer Group) and with a HER2-test were included. The analysis followed international recommendations, with an initial immunohistochemical (IHC) analysis with a semiquantitative grading of the reaction in four grades, 0 and 1+, defined as HER2-negative, 2+, equivocal and 3+, HER2-positive. In the 2+ group, a FISH-test was applied to identify the presence of gene amplification, defined as a ratio >/=2. We investigated the number of analyses performed, the number of positive cases and the relation between the result of IHC and the result of FISH. Furthermore we looked at the relation to other prognostic factors. The number of analyses gradually increased during the years of investigation, from 30% of patients in 2002 to 71% in 2006. The increase was seen in all laboratories resulting in all laboratories but one having a substantial number of analyses. Sixty-two percent of all cases were HER2-negative, 18% were equivocal and 21% positive in the IHC-analysis. Of the 2+, equivocal cases, 23% had gene-amplification. Thus, 23% of patients were defined as HER2-positive and eligible for treatment with trastuzumab. There was a significant correlation to other prognostic factors. The results are in accordance with what is found elsewhere. The quality of the test is further assured by all laboratories participating in external quality assurance schemes.

  10. Drug delivery device including electrolytic pump

    KAUST Repository

    Foulds, Ian G.

    2016-03-31

    Systems and methods are provided for a drug delivery device and use of the device for drug delivery. In various aspects, the drug delivery device combines a “solid drug in reservoir” (SDR) system with an electrolytic pump. In various aspects an improved electrolytic pump is provided including, in particular, an improved electrolytic pump for use with a drug delivery device, for example an implantable drug delivery device. A catalytic reformer can be incorporated in a periodically pulsed electrolytic pump to provide stable pumping performance and reduced actuation cycle.

  11. Seepage Model for PA Including Drift Collapse

    International Nuclear Information System (INIS)

    Li, G.; Tsang, C.

    2000-01-01

    The purpose of this Analysis/Model Report (AMR) is to document the predictions and analysis performed using the Seepage Model for Performance Assessment (PA) and the Disturbed Drift Seepage Submodel for both the Topopah Spring middle nonlithophysal and lower lithophysal lithostratigraphic units at Yucca Mountain. These results will be used by PA to develop the probability distribution of water seepage into waste-emplacement drifts at Yucca Mountain, Nevada, as part of the evaluation of the long term performance of the potential repository. This AMR is in accordance with the ''Technical Work Plan for Unsaturated Zone (UZ) Flow and Transport Process Model Report'' (CRWMS M andO 2000 [153447]). This purpose is accomplished by performing numerical simulations with stochastic representations of hydrological properties, using the Seepage Model for PA, and evaluating the effects of an alternative drift geometry representing a partially collapsed drift using the Disturbed Drift Seepage Submodel. Seepage of water into waste-emplacement drifts is considered one of the principal factors having the greatest impact of long-term safety of the repository system (CRWMS M andO 2000 [153225], Table 4-1). This AMR supports the analysis and simulation that are used by PA to develop the probability distribution of water seepage into drift, and is therefore a model of primary (Level 1) importance (AP-3.15Q, ''Managing Technical Product Inputs''). The intended purpose of the Seepage Model for PA is to support: (1) PA; (2) Abstraction of Drift-Scale Seepage; and (3) Unsaturated Zone (UZ) Flow and Transport Process Model Report (PMR). Seepage into drifts is evaluated by applying numerical models with stochastic representations of hydrological properties and performing flow simulations with multiple realizations of the permeability field around the drift. The Seepage Model for PA uses the distribution of permeabilities derived from air injection testing in niches and in the cross drift to

  12. Seepage Model for PA Including Dift Collapse

    Energy Technology Data Exchange (ETDEWEB)

    G. Li; C. Tsang

    2000-12-20

    The purpose of this Analysis/Model Report (AMR) is to document the predictions and analysis performed using the Seepage Model for Performance Assessment (PA) and the Disturbed Drift Seepage Submodel for both the Topopah Spring middle nonlithophysal and lower lithophysal lithostratigraphic units at Yucca Mountain. These results will be used by PA to develop the probability distribution of water seepage into waste-emplacement drifts at Yucca Mountain, Nevada, as part of the evaluation of the long term performance of the potential repository. This AMR is in accordance with the ''Technical Work Plan for Unsaturated Zone (UZ) Flow and Transport Process Model Report'' (CRWMS M&O 2000 [153447]). This purpose is accomplished by performing numerical simulations with stochastic representations of hydrological properties, using the Seepage Model for PA, and evaluating the effects of an alternative drift geometry representing a partially collapsed drift using the Disturbed Drift Seepage Submodel. Seepage of water into waste-emplacement drifts is considered one of the principal factors having the greatest impact of long-term safety of the repository system (CRWMS M&O 2000 [153225], Table 4-1). This AMR supports the analysis and simulation that are used by PA to develop the probability distribution of water seepage into drift, and is therefore a model of primary (Level 1) importance (AP-3.15Q, ''Managing Technical Product Inputs''). The intended purpose of the Seepage Model for PA is to support: (1) PA; (2) Abstraction of Drift-Scale Seepage; and (3) Unsaturated Zone (UZ) Flow and Transport Process Model Report (PMR). Seepage into drifts is evaluated by applying numerical models with stochastic representations of hydrological properties and performing flow simulations with multiple realizations of the permeability field around the drift. The Seepage Model for PA uses the distribution of permeabilities derived from air injection testing in

  13. Aerosol simulation including chemical and nuclear reactions

    International Nuclear Information System (INIS)

    Marwil, E.S.; Lemmon, E.C.

    1985-01-01

    The numerical simulation of aerosol transport, including the effects of chemical and nuclear reactions presents a challenging dynamic accounting problem. Particles of different sizes agglomerate and settle out due to various mechanisms, such as diffusion, diffusiophoresis, thermophoresis, gravitational settling, turbulent acceleration, and centrifugal acceleration. Particles also change size, due to the condensation and evaporation of materials on the particle. Heterogeneous chemical reactions occur at the interface between a particle and the suspending medium, or a surface and the gas in the aerosol. Homogeneous chemical reactions occur within the aersol suspending medium, within a particle, and on a surface. These reactions may include a phase change. Nuclear reactions occur in all locations. These spontaneous transmutations from one element form to another occur at greatly varying rates and may result in phase or chemical changes which complicate the accounting process. This paper presents an approach for inclusion of these effects on the transport of aerosols. The accounting system is very complex and results in a large set of stiff ordinary differential equations (ODEs). The techniques for numerical solution of these ODEs require special attention to achieve their solution in an efficient and affordable manner. 4 refs

  14. Determination Of Ph Including Hemoglobin Correction

    Science.gov (United States)

    Maynard, John D.; Hendee, Shonn P.; Rohrscheib, Mark R.; Nunez, David; Alam, M. Kathleen; Franke, James E.; Kemeny, Gabor J.

    2005-09-13

    Methods and apparatuses of determining the pH of a sample. A method can comprise determining an infrared spectrum of the sample, and determining the hemoglobin concentration of the sample. The hemoglobin concentration and the infrared spectrum can then be used to determine the pH of the sample. In some embodiments, the hemoglobin concentration can be used to select an model relating infrared spectra to pH that is applicable at the determined hemoglobin concentration. In other embodiments, a model relating hemoglobin concentration and infrared spectra to pH can be used. An apparatus according to the present invention can comprise an illumination system, adapted to supply radiation to a sample; a collection system, adapted to collect radiation expressed from the sample responsive to the incident radiation; and an analysis system, adapted to relate information about the incident radiation, the expressed radiation, and the hemoglobin concentration of the sample to pH.

  15. New Method for the Quantitative Analysis of Smear Slides in Pelagic and Hemi-Pelagic Sediments of the Bering Sea

    Science.gov (United States)

    Drake, M. K.; Aiello, I. W.; Ravelo, A. C.

    2014-12-01

    Petrographic microscopy of smear slides is the standard method to initially investigate marine sediments in core sediment studies (e.g. IODP expeditions). The technique is not commonly used in more complex analysis due to concerns over the subjectivity of the method and variability in operator training and experience. Two initiatives sponsored by Ocean Leadership, a sedimentology training workshop and a digital reference of smear slide components (Marsaglia et al., 2013) have been implemented to address the need for advanced training. While the influence of subjectivity on the quality of data has yet to be rigorously tested, the lack of standardization in the current method of smear slide analysis (SSA) remains a concern. The relative abundance of the three main components, (total diatoms, silt-to-sand sized siliciclastics, and clay minerals) of high and low density Bering Sea hemi-pelagic sediments from the ocean margin (Site U144; Site U1339) and pelagic sediments from the open-ocean (Site U1340) were analyzed. Our analyses show visual estimation is a reproducible method to quantify the relative abundance of the main sediment components. Furthermore, we present a modified method for SSA, with procedural changes objectively guided by statistical analyses, including constraints to increase randomness and precision in both the preparation and analysis of the smear slide. For example, repeated measure ANOVAs found a smear slide could be accurately quantified by counting three fields of view. Similarly, the use of replicate smear slides to quantify a sample was analyzed. Finally, the data produced from this modified SSA shows a strong correlation to continuously logged physical parameters of sediment such as gamma ray attenuation (Site U1339 r2= 0.41; Site U1340 r2= 0.36). Therefore, the modified SSA combined with other independent methods (e.g. laser particle size analysis, scanning electron microscopy, and physical properties) can be a very effective tool for the

  16. Grand unified models including extra Z bosons

    International Nuclear Information System (INIS)

    Li Tiezhong

    1989-01-01

    The grand unified theories (GUT) of the simple Lie groups including extra Z bosons are discussed. Under authors's hypothesis there are only SU 5+m SO 6+4n and E 6 groups. The general discussion of SU 5+m is given, then the SU 6 and SU 7 are considered. In SU 6 the 15+6 * +6 * fermion representations are used, which are not same as others in fermion content, Yukawa coupling and broken scales. A conception of clans of particles, which are not families, is suggested. These clans consist of extra Z bosons and the corresponding fermions of the scale. The all of fermions in the clans are down quarks except for the standard model which consists of Z bosons and 15 fermions, therefore, the spectrum of the hadrons which are composed of these down quarks are different from hadrons at present

  17. CLIC expands to include the Southern Hemisphere

    CERN Multimedia

    Roberto Cantoni

    2010-01-01

    Australia has recently joined the CLIC collaboration: the enlargement will bring new expertise and resources to the project, and is especially welcome in the wake of CERN budget redistributions following the recent adoption of the Medium Term Plan.   The countries involved in CLIC collaboration With the signing of a Memorandum of Understanding on 26 August 2010, the ACAS network (Australian Collaboration for Accelerator Science) became the 40th member of in the multilateral CLIC collaboration making Australia the 22nd country to join the collaboration. “The new MoU was signed by the ACAS network, which includes the Australian Synchrotron and the University of Melbourne”, explains Jean-Pierre Delahaye, CLIC Study Leader. “Thanks to their expertise, the Australian institutes will contribute greatly to the CLIC damping rings and the two-beam test modules." Institutes from any country wishing to join the CLIC collaboration are invited to assume responsibility o...

  18. Musculoskeletal ultrasound including definitions for ultrasonographic pathology

    DEFF Research Database (Denmark)

    Wakefield, RJ; Balint, PV; Szkudlarek, Marcin

    2005-01-01

    Ultrasound (US) has great potential as an outcome in rheumatoid arthritis trials for detecting bone erosions, synovitis, tendon disease, and enthesopathy. It has a number of distinct advantages over magnetic resonance imaging, including good patient tolerability and ability to scan multiple joints...... in a short period of time. However, there are scarce data regarding its validity, reproducibility, and responsiveness to change, making interpretation and comparison of studies difficult. In particular, there are limited data describing standardized scanning methodology and standardized definitions of US...... pathologies. This article presents the first report from the OMERACT ultrasound special interest group, which has compared US against the criteria of the OMERACT filter. Also proposed for the first time are consensus US definitions for common pathological lesions seen in patients with inflammatory arthritis....

  19. Education Program on Fossil Resources Including Coal

    Science.gov (United States)

    Usami, Masahiro

    Fossil fuels including coal play a key role as crucial energies in contributing to economic development in Asia. On the other hand, its limited quantity and the environmental problems causing from its usage have become a serious global issue and a countermeasure to solve such problems is very much demanded. Along with the pursuit of sustainable development, environmentally-friendly use of highly efficient fossil resources should be therefore, accompanied. Kyushu-university‧s sophisticated research through long years of accumulated experience on the fossil resources and environmental sectors together with the advanced large-scale commercial and empirical equipments will enable us to foster cooperative research and provide internship program for the future researchers. Then, this program is executed as a consignment business from the Ministry of Economy, Trade and Industry from 2007 fiscal year to 2009 fiscal year. The lecture that uses the textbooks developed by this program is scheduled to be started a course in fiscal year 2010.

  20. Pulmonary disorders, including vocal cord dysfunction.

    Science.gov (United States)

    Greenberger, Paul A; Grammer, Leslie C

    2010-02-01

    The lung is a very complex immunologic organ and responds in a variety of ways to inhaled antigens, organic or inorganic materials, infectious or saprophytic agents, fumes, and irritants. There might be airways obstruction, restriction, neither, or both accompanied by inflammatory destruction of the pulmonary interstitium, alveoli, or bronchioles. This review focuses on diseases organized by their predominant immunologic responses, either innate or acquired. Pulmonary innate immune conditions include transfusion-related acute lung injury, World Trade Center cough, and acute respiratory distress syndrome. Adaptive immunity responses involve the systemic and mucosal immune systems, activated lymphocytes, cytokines, and antibodies that produce CD4(+) T(H)1 phenotypes, such as for tuberculosis or acute forms of hypersensitivity pneumonitis, and CD4(+) T(H)2 phenotypes, such as for asthma, Churg-Strauss syndrome, and allergic bronchopulmonary aspergillosis. Copyright 2010 American Academy of Allergy, Asthma & Immunology. Published by Mosby, Inc. All rights reserved.

  1. AMS at the ANU including biomedical applications

    International Nuclear Information System (INIS)

    Fifield, L.K.; Allan, G.L.; Cresswell, R.G.; Ophel, T.R.; King, S.J.; Day, J.P.

    1993-01-01

    An extensive accelerator mass spectrometry program has been conducted on the 14UD accelerator at the Australian National University since 1986. In the two years since the previous conference, the research program has expanded significantly to include biomedical applications of 26 Al and studies of landform evolution using isotopes produced in situ in surface rocks by cosmic ray bombardment. The system is now used for the measurement of 10 Be, 14 C, 26 Al, 36 Cl, 59 Ni and 129 I, and research is being undertaken in hydrology, environmental geochemistry, archaeology and biomedicine. On the technical side, a new test system has permitted the successful off-line development of a high-intensity ion source. A new injection line to the 14UD has been established and the new source is now in position and providing beams to the accelerator. 4 refs

  2. AMS at the ANU including biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Fifield, L.K.; Allan, G.L.; Cresswell, R.G.; Ophel, T.R. [Australian National Univ., Canberra, ACT (Australia); King, S.J.; Day, J.P. [Manchester Univ. (United Kingdom). Dept. of Chemistry

    1993-12-31

    An extensive accelerator mass spectrometry program has been conducted on the 14UD accelerator at the Australian National University since 1986. In the two years since the previous conference, the research program has expanded significantly to include biomedical applications of {sup 26}Al and studies of landform evolution using isotopes produced in situ in surface rocks by cosmic ray bombardment. The system is now used for the measurement of {sup 10}Be, {sup 14}C, {sup 26}Al, {sup 36}Cl, {sup 59}Ni and {sup 129}I, and research is being undertaken in hydrology, environmental geochemistry, archaeology and biomedicine. On the technical side, a new test system has permitted the successful off-line development of a high-intensity ion source. A new injection line to the 14UD has been established and the new source is now in position and providing beams to the accelerator. 4 refs.

  3. Including the gifted learner: perceptions of South African teachers ...

    African Journals Online (AJOL)

    Qualitative content analysis revealed the following themes: inclusive education and the learner who is gifted; curriculum differentiation; obstacles to curriculum differentiation; and possible solutions for more effectively including the gifted learner. Despite their diversity in terms of culture, language and positioning by the ...

  4. A micromanipulation cell including a tool changer

    Science.gov (United States)

    Clévy, Cédric; Hubert, Arnaud; Agnus, Joël; Chaillet, Nicolas

    2005-10-01

    This paper deals with the design, fabrication and characterization of a tool changer for micromanipulation cells. This tool changer is part of a manipulation cell including a three linear axes robot and a piezoelectric microgripper. All these parts are designed to perform micromanipulation tasks in confined spaces such as a microfactory or in the chamber of a scanning electron microscope (SEM). The tool changer principle is to fix a pair of tools (i.e. the gripper tips) either on the tips of the microgripper actuator (piezoceramic bulk) or on a tool magazine. The temperature control of a thermal glue enables one to fix or release this pair of tools. Liquefaction and solidification are generated by surface mounted device (SMD) resistances fixed on the surface of the actuator or magazine. Based on this principle, the tool changer can be adapted to other kinds of micromanipulation cells. Hundreds of automatic tool exchanges were performed with a maximum positioning error between two consecutive tool exchanges of 3.2 µm, 2.3 µm and 2.8 µm on the X, Y and Z axes respectively (Z refers to the vertical axis). Finally, temperature measurements achieved under atmospheric pressure and in a vacuum environment and pressure measurements confirm the possibility of using this device in the air as well as in a SEM.

  5. Robust Unit Commitment Including Frequency Stability Constraints

    Directory of Open Access Journals (Sweden)

    Felipe Pérez-Illanes

    2016-11-01

    Full Text Available An increased use of variable generation technologies such as wind power and photovoltaic generation can have important effects on system frequency performance during normal operation as well as contingencies. The main reasons are the operational principles and inherent characteristics of these power plants like operation at maximum power point and no inertial response during power system imbalances. This has led to new challenges for Transmission System Operators in terms of ensuring system security during contingencies. In this context, this paper proposes a Robust Unit Commitment including a set of additional frequency stability constraints. To do this, a simplified dynamic model of the initial system frequency response is used in combination with historical frequency nadir data during contingencies. The proposed approach is especially suitable for power systems with cost-based economic dispatch like those in most Latin American countries. The study is done considering the Northern Interconnected System of Chile, a 50-Hz medium size isolated power system. The results obtained were validated by means of dynamic simulations of different system contingencies.

  6. Unifying all elementary particle forces including gravity

    International Nuclear Information System (INIS)

    Terazawa, H.

    1979-01-01

    It is a final goal in physics to unify all four basic forces, strong, weak, electromagnetic and gravitational. First, the unified gauge theories of strong, weak and electromagnetic interactions are discussed. There are two standard models, the model of Pati and Salam in which leptons have the fourth color, and the model of Georgi and Glashow in which a simple group SU (5) is assumed for grand unification. Two mass relations for leptons and quarks were derived, and the extension of the Georgi-Glashow model to a grand unified model of SU (6) gauge group has been made. The quantization of the electric charge of elementary particles is one of the most satisfactory features in grand unified gauge theories. The constraint relations between the gauge couplings, the weak mixing angle and the mass scale of symmetry breaking owing to the renormalization effect are not so severe as those in the grand unified models. However, the mass scale becomes far above the Planck mass in some cases. The baryon number non-conservation is one of the most intriguing features common to grand unified gauge theories. The unified models of all elementary particle forces including gravity are discussed. The discovery of weak vector bosons and the production of subquark pairs are anticipated. (Kako, I.)

  7. [Contracts including performance and management of uncertainty].

    Science.gov (United States)

    Duru, G; Garassus, P; Auray, J-P

    2013-09-01

    Since many decades in France, the most important part of ambulatory health care expenditure is represented by drug consumption. By the fact, French patient is indeed the greatest world consumer of pharmaceuticals treatments. Therefore, the regulation authorities by successive strategies, attempt to limit or even restrict market access for new drugs in the health care sector secured by public social insurance coverage. Common objectives are to assess the reimbursement to scientific studies and to fix the price of therapeutics at an acceptable level for both industries and government. New trends try then to determine recently the drug price in a dual approach, as a component of global and effective contract, including performance and outcome. The first diffusion authorization is diffusion concerned, but this concept takes into account the eventual success of new produces in long-term survey. Signed for a fixed period as reciprocal partnership between regulation authorities and pharmaceutics industries, the contract integrates two dimensions of incertitude. The first one is represented by the strategy of new treatments development according to efficacy and adapted price, and the second one is linked to the result of diffusion and determines adapted rules if eventual non-respects of the previous engagement are registered. This paper discusses problems related to this new dimension of incertitude affected by conditional drug prices in market access strategy and the adapted follow-up of new treatment diffusion fixed by "outcome" contract between French regulation administration and pharmaceutics industries in our recent economic context. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  8. Statistical test of reproducibility and operator variance in thin-section modal analysis of textures and phenocrysts in the Topopah Spring member, drill hole USW VH-2, Crater Flat, Nye County, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    Moore, L.M.; Byers, F.M. Jr.; Broxton, D.E.

    1989-06-01

    A thin-section operator-variance test was given to the 2 junior authors, petrographers, by the senior author, a statistician, using 16 thin sections cut from core plugs drilled by the US Geological Survey from drill hole USW VH-2 standard (HCQ) drill core. The thin sections are samples of Topopah Spring devitrified rhyolite tuff from four textural zones, in ascending order: (1) lower nonlithophysal, (2) lower lithopysal, (3) middle nonlithophysal, and (4) upper lithophysal. Drill hole USW-VH-2 is near the center of the Crater Flat, about 6 miles WSW of the Yucca Mountain in Exploration Block. The original thin-section labels were opaqued out with removable enamel and renumbered with alpha-numeric labels. The sliders were then given to the petrographer operators for quantitative thin-section modal (point-count) analysis of cryptocrystalline, spherulitic, granophyric, and void textures, as well as phenocryst minerals. Between operator variance was tested by giving the two petrographers the same slide, and within-operator variance was tested by the same operator the same slide to count in a second test set, administered at least three months after the first set. Both operators were unaware that they were receiving the same slide to recount. 14 figs., 6 tabs.

  9. Included as Excluded and Excluded as Included: Minority Language Pupils in Norwegian Inclusion Policy

    Science.gov (United States)

    Hilt, Line Torbjørnsen

    2015-01-01

    This article offers an analysis of four Norwegian policy documents on inclusion of minority language pupils. The main concepts of this policy will be reconstructed and re-described, applying Niklas Luhmann's systems theory at different levels of the analysis. Luhmann's theory about society as a conglomerate of self-referential social systems…

  10. A quantitative analysis of microbially-induced calcite precipitation employing artificial and naturally-occurring sediments

    Science.gov (United States)

    Lokier, Stephen; Krieg Dosier, Ginger

    2013-04-01

    Microbially-induced calcite precipitation is a strong candidate for the production of sustainable construction materials. The process employs the microbe Sporosarcina pasteurii as an agent to microbially mediate the precipitation of calcium carbonate to bind unconsolidated sediment. As this process can be achieved under ambient temperature conditions and can utilise a wide variety of easily-available sediments, potentially including waste materials, it is envisioned that this procedure could significantly reduce carbon-dioxide emissions in the construction industry. This study describes and quantifies the precipitation of calcite cement in a range of naturally-occurring sediments compared with a control matrix. The study establishes the optimum treatment time for effective cement precipitation in order to produce a material that meets the standards required for construction whilst keeping economic and environmental outlays at a minimum. The 'control sediment' employed industrial-grade glass beads with a grain size range of 595-1180 microns (16-30 US mesh). Sporosarcina pasteurii were mixed in a solution of urea and calcium chloride and then inoculated into the control sediment. The microbes attach to the surface of the sediment grains and employ urea as a source of energy to produce ammonia and carbon dioxide. By so doing, they increase the pH of the solution allowing calcium carbonate to precipitate at the cell walls to act as nucleation points facilitating the precipitation of cements as a grain-coating and biocementing the unconsolidated sediment. The solution treatment was repeated at eight hour intervals with samples removed for detailed analysis after each every five consecutive treatments (i.e. 40 hours). The process was repeated to produce 20 samples with treatment times between 40 and 800 hours. Cemented samples were impregnated with blue epoxy and examined petrographically to monitor cement development. Modal analysis was undertaken on each cemented

  11. The Byzantine ceramics from Pergamon excavations. Characterization of local and imported productions by elementary analysis using PIXE and INAA methods and by petrography; Les ceramiques byzantines des fouilles de Pergame. Caracterisation des productions locales et importees par analyse elementaire par les methodes PIXE et INAA et par petrographie

    Energy Technology Data Exchange (ETDEWEB)

    Waksman, S.Y.

    1995-01-12

    An important ceramics material dated back to the 12th-14th centuries has been excavated in Pergamon (Turkey). Among these findings, wasters, tripod stilts and unfinished ware attest to local production in the Byzantine period. Elemental analysis by the methods PIXE (Particle Induced X-ray Emission) and INAA (Instrumental Neutron Activation Analysis) has been performed on a representative sampling of 160 sherds, including attested local material. Multivariate statistical techniques were used to classify the sherds into groups of similar composition and thus to distinguish ceramics made in Pergamon from imported wares. Several groups of local production have been constituted, which correspond to wares differing in date and fabric. The geochemical characterization of the pastes, complemented with petrographical and mineralogical data, shows that specific raw materials have been used to manufacture each ware. The analytical data related to ceramics made in Pergamon will serve as reference data for future provenance studies. Such reference groups of Byzantine ceramics are very rare, and therefore the ceramics imported into Pergamon cannot be attributed as to their origin. Among the ceramics widely diffused in the Byzantine world, some importations belonging to the ``fine sgraffito`` and ``Zeuxippus ware`` types have been identified. The latter type has been a source of stylistic influence for the workshops of Pergamon, since the analyses show that imitated ``Zeuxippus ware`` has been produced there. These imitations were probably themselves diffused on a regional scale. (author). 238 refs., 48 figs., 53 tabs., 22 photos., 8 appends.

  12. Smart Farming: Including Rights Holders for Responsible Agricultural Innovation

    OpenAIRE

    Kelly Bronson

    2018-01-01

    This article draws on the literature of responsible innovation to suggest concrete processes for including rights holders in the “smart” agricultural revolution. It first draws upon historical agricultural research in Canada to highlight how productivist values drove seed innovations with particular consequences for the distribution of power in the food system. Next, the article uses document analysis to suggest that a similar value framework is motivating public investment in smart farming i...

  13. Modeling heart rate variability including the effect of sleep stages

    Science.gov (United States)

    Soliński, Mateusz; Gierałtowski, Jan; Żebrowski, Jan

    2016-02-01

    We propose a model for heart rate variability (HRV) of a healthy individual during sleep with the assumption that the heart rate variability is predominantly a random process. Autonomic nervous system activity has different properties during different sleep stages, and this affects many physiological systems including the cardiovascular system. Different properties of HRV can be observed during each particular sleep stage. We believe that taking into account the sleep architecture is crucial for modeling the human nighttime HRV. The stochastic model of HRV introduced by Kantelhardt et al. was used as the initial starting point. We studied the statistical properties of sleep in healthy adults, analyzing 30 polysomnographic recordings, which provided realistic information about sleep architecture. Next, we generated synthetic hypnograms and included them in the modeling of nighttime RR interval series. The results of standard HRV linear analysis and of nonlinear analysis (Shannon entropy, Poincaré plots, and multiscale multifractal analysis) show that—in comparison with real data—the HRV signals obtained from our model have very similar properties, in particular including the multifractal characteristics at different time scales. The model described in this paper is discussed in the context of normal sleep. However, its construction is such that it should allow to model heart rate variability in sleep disorders. This possibility is briefly discussed.

  14. Ionic liquids, electrolyte solutions including the ionic liquids, and energy storage devices including the ionic liquids

    Science.gov (United States)

    Gering, Kevin L.; Harrup, Mason K.; Rollins, Harry W.

    2015-12-08

    An ionic liquid including a phosphazene compound that has a plurality of phosphorus-nitrogen units and at least one pendant group bonded to each phosphorus atom of the plurality of phosphorus-nitrogen units. One pendant group of the at least one pendant group comprises a positively charged pendant group. Additional embodiments of ionic liquids are disclosed, as are electrolyte solutions and energy storage devices including the embodiments of the ionic liquid.

  15. Truck Drivers And Risk Of STDs Including HIV

    Directory of Open Access Journals (Sweden)

    Bansal R.K

    1995-01-01

    Full Text Available Research Question: Whether long distance truck drivers are at a higher risk of contracting and transmitting STDs including HIV? Objectives: i To study the degree of knowledge of HIV and AIDS among long- distance truck drivers. ii Assess their sexual behaviour including condom use. iii Explore their prevailing social influences and substance abuse patterns. iv Explore their treatment seeking bahaviour as regards STDs. v Deduce their risk of contracting and transmitting STDs including HIV. Study Design: Cross- sectional interview. Setting: Transport Nagar, Indore (M.P Participants: 210 senior drivers (First drivers and 210 junior drivers (Second drivers. Study Variables: Extra-Marital sexual intercourse, condom usage, past and present history of STDs, treatment and counseling, substance abuse, social â€" cultural milieu. Outcome Variables: Risk of contraction of STDs. Statistical Analysis: Univariate analysis. Results: 94% of the drivers were totally ignorant about AIDS. 82.9% and 43.8 % of the senior and junior drivers had a history of extra- marital sex and of these only 2 regularly used condoms. 13.8% and 3.3 % of the senior and junior drivers had a past or present history suggestive of STD infection. Alcohol and Opium were regularly used by them. Conclusion: The studied drivers are at a high risk of contracting and transmitting STDs including HIV.

  16. Including information technology project management in the nursing informatics curriculum.

    Science.gov (United States)

    Sockolow, Paulina; Bowles, Kathryn H

    2008-01-01

    Project management is a critical skill for nurse informaticists who are in prominent roles developing and implementing clinical information systems. It should be included in the nursing informatics curriculum, as evidenced by its inclusion in informatics competencies and surveys of important skills for informaticists. The University of Pennsylvania School of Nursing includes project management in two of the four courses in the master's level informatics minor. Course content includes the phases of the project management process; the iterative unified process methodology; and related systems analysis and project management skills. During the introductory course, students learn about the project plan, requirements development, project feasibility, and executive summary documents. In the capstone course, students apply the system development life cycle and project management skills during precepted informatics projects. During this in situ experience, students learn, the preceptors benefit, and the institution better prepares its students for the real world.

  17. Classical mechanics including an introduction to the theory of elasticity

    CERN Document Server

    Hentschke, Reinhard

    2017-01-01

    This textbook teaches classical mechanics as one of the foundations of physics. It describes the mechanical stability and motion in physical systems ranging from the molecular to the galactic scale. Aside from the standard topics of mechanics in the physics curriculum, this book includes an introduction to the theory of elasticity and its use in selected modern engineering applications, e.g. dynamic mechanical analysis of viscoelastic materials. The text also covers many aspects of numerical mechanics, ranging from the solution of ordinary differential equations, including molecular dynamics simulation of many particle systems, to the finite element method. Attendant Mathematica programs or parts thereof are provided in conjunction with selected examples. Numerous links allow the reader to connect to related subjects and research topics. Among others this includes statistical mechanics (separate chapter), quantum mechanics, space flight, galactic dynamics, friction, and vibration spectroscopy. An introductory...

  18. Catalyst support structure, catalyst including the structure, reactor including a catalyst, and methods of forming same

    Science.gov (United States)

    Van Norman, Staci A.; Aston, Victoria J.; Weimer, Alan W.

    2017-05-09

    Structures, catalysts, and reactors suitable for use for a variety of applications, including gas-to-liquid and coal-to-liquid processes and methods of forming the structures, catalysts, and reactors are disclosed. The catalyst material can be deposited onto an inner wall of a microtubular reactor and/or onto porous tungsten support structures using atomic layer deposition techniques.

  19. Launch Lock Assemblies Including Axial Gap Amplification Devices and Spacecraft Isolation Systems Including the Same

    Science.gov (United States)

    Barber, Tim Daniel (Inventor); Hindle, Timothy (Inventor); Young, Ken (Inventor); Davis, Torey (Inventor)

    2014-01-01

    Embodiments of a launch lock assembly are provided, as are embodiments of a spacecraft isolation system including one or more launch lock assemblies. In one embodiment, the launch lock assembly includes first and second mount pieces, a releasable clamp device, and an axial gap amplification device. The releasable clamp device normally maintains the first and second mount pieces in clamped engagement; and, when actuated, releases the first and second mount pieces from clamped engagement to allow relative axial motion there between. The axial gap amplification device normally residing in a blocking position wherein the gap amplification device obstructs relative axial motion between the first and second mount pieces. The axial gap amplification device moves into a non-blocking position when the first and second mount pieces are released from clamped engagement to increase the range of axial motion between the first and second mount pieces.

  20. Smart Farming: Including Rights Holders for Responsible Agricultural Innovation

    Directory of Open Access Journals (Sweden)

    Kelly Bronson

    2018-02-01

    Full Text Available This article draws on the literature of responsible innovation to suggest concrete processes for including rights holders in the “smart” agricultural revolution. It first draws upon historical agricultural research in Canada to highlight how productivist values drove seed innovations with particular consequences for the distribution of power in the food system. Next, the article uses document analysis to suggest that a similar value framework is motivating public investment in smart farming innovations. The article is of interest to smart farming’s decision makers (from farmers to governance actors and a broader audience – anyone interested in engendering equity through innovation-led societal transitions.

  1. Microfluidic System Simulation Including the Electro-Viscous Effect

    Science.gov (United States)

    Rojas, Eileen; Chen, C. P.; Majumdar, Alok

    2007-01-01

    This paper describes a practical approach using a general purpose lumped-parameter computer program, GFSSP (Generalized Fluid System Simulation Program) for calculating flow distribution in a network of micro-channels including electro-viscous effects due to the existence of electrical double layer (EDL). In this study, an empirical formulation for calculating an effective viscosity of ionic solutions based on dimensional analysis is described to account for surface charge and bulk fluid conductivity, which give rise to electro-viscous effect in microfluidics network. Two dimensional slit micro flow data was used to determine the model coefficients. Geometry effect is then included through a Poiseuille number correlation in GFSSP. The bi-power model was used to calculate flow distribution of isotropically etched straight channel and T-junction microflows involving ionic solutions. Performance of the proposed model is assessed against experimental test data.

  2. Electrolyte solutions including a phosphoranimine compound, and energy storage devices including same

    Science.gov (United States)

    Klaehn, John R.; Dufek, Eric J.; Rollins, Harry W.; Harrup, Mason K.; Gering, Kevin L.

    2017-09-12

    An electrolyte solution comprising at least one phosphoranimine compound and a metal salt. The at least one phosphoranimine compound comprises a compound of the chemical structure ##STR00001## where X is an organosilyl group or a tert-butyl group and each of R.sup.1, R.sup.2, and R.sup.3 is independently selected from the group consisting of an alkyl group, an aryl group, an alkoxy group, or an aryloxy group. An energy storage device including the electrolyte solution is also disclosed.

  3. Behaviour of major, minor and trace elements (including REEs during kaolinization processes at Zonouz deposit, northeast of Marand, East Azarbaidjan province

    Directory of Open Access Journals (Sweden)

    Vahideh Alipour

    2011-11-01

    Full Text Available The Zonouz kaolin deposit is located ~15 km northeast of Marand, East-Azarbaidjan province. Based on physical features in field investigations, such as color, five distinct kaolin types including (1 white, (2 lemon, (3 gray, (4 brown, and (5 yellow are distinguished in the deposit. Field evidence and petrographic studies indicate that the deposit is genetically close to trachy-andesite rocks. According to mineralogical data, the deposit contains quartz, kaolinite, montmorillonite, calcite, pyrophyllite, chlorite, muscovite-illite, dolomite, hematite, and anatase minerals. Geochemical data indicate that function of alteration processes on trachy-andesite rocks during development of Zonouz ore deposit was accompanied by leaching of elements such as Al, Na, K, Rb, Ba, V, Hf, Cu, Zr, Tm, Yb, and Lu, enrichment of elements such as U, Nb, and Ta, and leaching-fixation of elements such as Si, Fe, Ca, Mg, Ti, Mn, P, Cs, Sr, Th, Co, Cr, Ni, Y, Ga, LREE, Tb, Dy, Ho, and Er. Incorporation of obtained results from mineralogical and geochemical studies show that physico-chemical conditions of alteration environment, the relative stability of primary minerals, surface adsorption, preferential sorption by metallic oxides, existing of organic matters, scavenging and concentration processes, and fixation in neomorphic mineralogical phases played important role in distribution of elements in the deposit. Geochemical studies show that development of the deposit is relative to two types of processes, (1 hypogene and (2 supergene. The distribution pattern of REEs indicates that differentiation degree of LREEs from HREEs in supergene kaolins is more than hypogene kaolins. Geochemical studies indicate that minerals such as Mn-oxides, zircon, anatase, hematite, cerianite, and secondary phosphates (monazite, rhabdophane, churchite, and zenotime are the potential hosts for rare earth elements in this deposit.

  4. Petrographic and Geochemical Study of Low Grade Metamorphic ...

    African Journals Online (AJOL)

    interaction of water with ores and gangue minerals facilitate leaching and release of metals into the aquifer system ... of groundwater depends on its purpose of use i.e. for drinking, industry, irrigation etc. So, the ..... samples about one liter each were collected in pre-cleaned and numbered plastic bottles. The. © CNCS.

  5. Petrographic and Geochemical Study of Low Grade Metamorphic ...

    African Journals Online (AJOL)

    Hydrogeochemical data indicate that groundwater is relatively fresh and among major elements Na, Ca and Mg show relatively higher values compared to K. Water from metasediments is relatively harder among others. Na though shows higher values compared to Ca and Mg does not indicate any particular trend. Ca and ...

  6. Petrographic and geochemical characteristics of the Kiejo, Rungwe ...

    African Journals Online (AJOL)

    Rock samples were collected from the Kiejo, Rungwe and Ngozi volcanoes, southern Tanzania. Results show that, in the Ngozi and Rungwe volcanoes, magma cooled relatively fast. After large part of the magma had crystallized, nucleation of crystals at a relatively slow rate crystallized from interstitial fluids of the primary ...

  7. Assessing bias in osteoarthritis trials included in Cochrane reviews

    DEFF Research Database (Denmark)

    Hansen, Julie Bolvig; Juhl, Carsten Bogh; Boutron, Isabelle

    2014-01-01

    the first appearing forest plot for overall pain in the Cochrane review. Treatment effect sizes will be expressed as standardised mean differences (SMDs), where the difference in mean values available from the forest plots is divided by the pooled SD. To empirically assess the risk of bias in treatment......INTRODUCTION: The validity of systematic reviews and meta-analysis depends on methodological quality and unbiased dissemination of trials. Our objective is to evaluate the association of estimates of treatment effects with different bias-related study characteristics in meta...... benefits, we will perform stratified analyses of the trials from the included meta-analyses and assess the interaction between trial characteristics and treatment effect. A relevant study-level covariate is defined as one that decreases the between-study variance (τ(2), estimated as Tau...

  8. TOOLS TO INCLUDE BLIND STUDENTS IN SCHOOL BUILDING PERFORMANCE ASSESSMENTS

    Directory of Open Access Journals (Sweden)

    Tania Pietzschke Abate

    2016-05-01

    Full Text Available This article discusses the design of data collection instruments that include the opinions of blind students, in accordance with the principles of Universal Design (UD. The aim of this study is to understand the importance of adapting data collection instruments for the inclusion of disabled persons in field research in Architecture and Design, among other fields. The data collection instruments developed were a play interview with a tactile map and a 3D survey with the use of tactile models. These instruments sought to assess the school environment experienced by blind students. The study involved students from the early years of a school for the blind who had not yet mastered the Braille system. The participation of these students was evaluated. A multidisciplinary team consisting of architects, designers, educators, and psychologists lent support to the study. The results showed that the data collection instruments adapted to blind students were successful in making the group of authors examine questions regarding UD. An analysis of the participatory phase showed that the limitations resulting from blindness determine the specificities in the adaptation and implementation process of the instruments in schools. Practical recommendations for future studies related to instruments in the UD thematic are presented. This approach is in line with the global trend of including disabled persons in society based on these users’ opinions concerning what was designed by architects and designers.

  9. Four new massive pulsating white dwarfs including an ultramassive DAV

    Science.gov (United States)

    Curd, Brandon; Gianninas, A.; Bell, Keaton J.; Kilic, Mukremin; Romero, A. D.; Allende Prieto, Carlos; Winget, D. E.; Winget, K. I.

    2017-06-01

    We report the discovery of four massive (M > 0.8 M⊙) ZZ Ceti white dwarfs, including an ultramassive 1.16 M⊙ star. We obtained ground-based, time series photometry for 13 white dwarfs from the Sloan Digital Sky Survey Data Release 7 and Data Release 10 whose atmospheric parameters place them within the ZZ Ceti instability strip. We detect monoperiodic pulsations in three of our targets (J1015, J1554 and J2038) and identify three periods of pulsation in J0840 (173, 327 and 797 s). Fourier analysis of the remaining nine objects does not indicate variability above the 4 detection threshold. Our preliminary asteroseismic analysis of J0840 yields a stellar mass M = 1.14 ± 0.01 M⊙, hydrogen and helium envelope masses of MH = 5.8 × 10-7 M⊙ and MHe = 4.5 × 10-4 M⊙ and an expected core crystallized mass ratio of 50-70 per cent. J1015, J1554 and J2038 have masses in the range 0.84-0.91 M⊙ and are expected to have a CO core; however, the core of J0840 could consist of highly crystallized CO or ONeMg given its high mass. These newly discovered massive pulsators represent a significant increase in the number of known ZZ Ceti white dwarfs with mass M > 0.85 M⊙, and detailed asteroseismic modelling of J0840 will allow for significant tests of crystallization theory in CO and ONeMg core white dwarfs.

  10. Mineralogical and Geochemical Analysis of Howardite DaG 779: understanding geological evolution of asteroid (4) Vesta

    Science.gov (United States)

    Marcel Müller, Christian; Mengel, Kurt; Singh Thangjam, Guneshwar; Weckwerth, Gerd

    2016-04-01

    The HED meteorites, a clan of stony achondrites, are believed to originate from asteroid (4) Vesta (e.g. Mittlefehldt et al. (2015)). Recent evolution models (e.g. Toplis et al. (2013)) and observations from Dawn spacecraft data (e.g., Prettyman et al. (2013)) indicate that diogenites form the lower crust and uppermost mantle of (4) Vesta. Deep seated material excavated by large impacts such as the Rheasilvia- and Veneneiaforming event should be present in howardites. We analysed a slice of howardite DaG 779 which had been recovered from the Libyan Desert in 1999 and was briefly described by Grossmann (2000). The data presented here include electron microprobe, bulk-rock XRD and XRF as well as trace element analysis by ICP-MS and INA. The petrographic results confirm earlier observations that DaG 779 is polymict and mainly contains diogenite and eucrite clasts. Mass balance calculations using bulk-rock and microprobe major element data reveal a modal mineralogy of 77% orthopyroxene, 8% plagioclase, 7% clinopyroxene and 2% spinels, the rest being olivine, SiO2-phases, sulphides, and native Fe(Ni). When compared with the element compilation recently reported by Mittlefehldt (2015) the 39 trace element analysed here (including REE and PGE) confirm that this howardite is clearly dominated by diogenite. Beside the modal petrographic information, a number of more detailed observations obtained from microprobe investigations reveal fresh and recrystallized glasses, troilite-orthopyroxene symplectites from a mixed silicate-sulphide melt giving rise to graphic intergrowths as well as vermicular and reticular FeS in highly disrupted clasts. While the origin of the FeS in these clasts is not clear yet, its particular shape and distribution indicates that this mineral has been (partially) molten and recrystallized from a sulphide melt. The silicate minerals around these FeS occurrences are recrystallized but there is no indication for a partial silicate melt. Further

  11. Including geological information in the inverse problem of palaeothermal reconstruction

    Science.gov (United States)

    Trautner, S.; Nielsen, S. B.

    2003-04-01

    A reliable reconstruction of sediment thermal history is of central importance to the assessment of hydrocarbon potential and the understanding of basin evolution. However, only rarely do sedimentation history and borehole data in the form of present day temperatures and vitrinite reflectance constrain the past thermal evolution to a useful level of accuracy (Gallagher and Sambridge,1992; Nielsen,1998; Trautner and Nielsen,2003). This is reflected in the inverse solutions to the problem of determining heat flow history from borehole data: The recent heat flow is constrained by data while older values are governed by the chosen a prior heat flow. In this paper we reduce this problem by including geological information in the inverse problem. Through a careful analysis of geological and geophysical data the timing of the tectonic processes, which may influence heat flow, can be inferred. The heat flow history is then parameterised to allow for the temporal variations characteristic of the different tectonic events. The inversion scheme applies a Markov chain Monte Carlo (MCMC) approach (Nielsen and Gallagher, 1999; Ferrero and Gallagher,2002), which efficiently explores the model space and futhermore samples the posterior probability distribution of the model. The technique is demonstrated on wells in the northern North Sea with emphasis on the stretching event in Late Jurassic. The wells are characterised by maximum sediment temperature at the present day, which is the worst case for resolution of the past thermal history because vitrinite reflectance is determined mainly by the maximum temperature. Including geological information significantly improves the thermal resolution. Ferrero, C. and Gallagher,K.,2002. Stochastic thermal history modelling.1. Constraining heat flow histories and their uncertainty. Marine and Petroleum Geology, 19, 633-648. Gallagher,K. and Sambridge, M., 1992. The resolution of past heat flow in sedimentary basins from non-linear inversion

  12. Multi-criteria decision analysis with fuzzy probabilistic risk assessment for produced water management[Includes the CSCE forum on professional practice and career development : 1. international engineering mechanics and materials specialty conference : 1. international/3. coastal, estuarine and offshore engineering specialty conference : 2. international/8. construction specialty conference

    Energy Technology Data Exchange (ETDEWEB)

    Mofarrah, A.; Husain, T.; Hawboldt, K. [Memorial Univ. of Newfoundland, St. John' s, NL (Canada). Faculty of Engineering and Applied Science

    2009-07-01

    This paper presented an integrated approach for management of produced water (PW) from oil and gas production. A multi-criteria analysis technique was integrated with risk assessment methodology to enhance the decision making process. As an integral part of overall environmental risk analyses, risk management involves selecting the most appropriate action, and integrating the results of risk assessment with engineering data, social, economic, and political concerns to make an acceptable decision. The risk assessment process involves objectivity, whereas risk management involves preferences and attitudes, which have objective and subjective elements. Choosing an alternative based on risk criteria is challenging for decision makers. Multi-criteria decision making (MCDM) can be used for this purpose. The proposed decision analysis framework integrates fuzzy-probabilistic risk assessment (FPRA) methodology into a fuzzy multi-criteria decision making (FMCDM) analysis. The centroid method was used for defuzzification and ranking alternatives. The efficacy of the integrated technique was demonstrated in an application where 3 types of PW management systems for offshore oil and gas operations were evaluated. 17 refs., 4 tabs., 5 figs.

  13. Geochemical analysis of core from a geothermal anomaly

    International Nuclear Information System (INIS)

    Haverslew, B.; Tammemagi, H.Y.

    1985-04-01

    A mild geothermal area in western Montana, USA, has been studied, as a natural analog, to learn about the effects that long-term heat generated by a repository containing spent nuclear fuel might have on the surrounding rock mass. The results of previous geological, geophysical and hydrogeological studies are briefly summarized. Extensive petrological studies have been undertaken on core samples obtained from a 2 km deep borehole drilled into the Empire Creek Stock. These include a detailed petrographic study, x-ray diffraction analyses, scanning electron microscope and electron microprobe analyses, porosity and permeability measurements, oxygen isotope analyses, uranium disequilibrium analyses and K-Ar age determinations. The implications to deep burial of nuclear wastes are discussed. 40 refs

  14. Analysis

    DEFF Research Database (Denmark)

    Hvelplund, Frede; Østergaard, Poul; Möller, Bernd

    2014-01-01

    This chapter introduces the concept of smart energy systems. As opposed to the smart grid concept, which takes focuses solely on the electricity sector, smart energy systems includes the entire energy system in its approach to identifying suitable energy infrastructure designs and operating strat...

  15. Falling vertical chain of oscillators, including collisions, damping, and pretensioning

    Science.gov (United States)

    Plaut, R. H.; Borum, A. D.; Holmes, D. P.; Dillard, D. A.

    2015-08-01

    A chain of point masses connected by linear springs and sometimes dashpots is considered. The chain hangs in a vertical equilibrium configuration, held by its top mass. Then the top mass is released, and the chain falls. Internal damping, modeled by the dashpots, causes the bottom mass to move faster. As the system falls, upper masses sometimes accelerate faster than gravitational acceleration, and collisions may occur between adjacent masses. The types of collisions treated here include elastic, inelastic, and perfectly inelastic (in which colliding masses often stick together thereafter). The unstretched lengths of the springs, and a compressive force caused by pretensioning, may significantly affect the characteristics of the motion. Analytical and numerical results are presented for cases involving a few masses, and some generalizations are made for systems with an arbitrary number of masses. Also, the vertical chain may be used to model the motion of a falling Slinky after release at its top end. The bottom of the continuous Slinky does not move until the coils above it have collapsed onto it, and the collapse time is estimated here using the discrete chain model. For a metal Slinky with 86 masses, the estimated time is close to that previously obtained by a continuous elastic analysis.

  16. Cosmological constraints on the neutrino mass including systematic uncertainties

    Science.gov (United States)

    Couchot, F.; Henrot-Versillé, S.; Perdereau, O.; Plaszczynski, S.; Rouillé d'Orfeuil, B.; Spinelli, M.; Tristram, M.

    2017-10-01

    When combining cosmological and oscillations results to constrain the neutrino sector, the question of the propagation of systematic uncertainties is often raised. We address this issue in the context of the derivation of an upper bound on the sum of the neutrino masses (Σmν) with recent cosmological data. This work is performed within the ΛCDM model extended to Σmν, for which we advocate the use of three mass-degenerate neutrinos. We focus on the study of systematic uncertainties linked to the foregrounds modelling in cosmological microwave background (CMB) data analysis, and on the impact of the present knowledge of the reionisation optical depth. This is done through the use of different likelihoods built from Planck data. Limits on Σmν are derived with various combinations of data, including the latest baryon acoustic oscillations (BAO) and Type Ia supernovae (SNIa) results. We also discuss the impact of the preference for current CMB data for amplitudes of the gravitational lensing distortions higher than expected within the ΛCDM model, and add the Planck CMB lensing. We then derive a robust upper limit: Σmνcosmological parameters is also reported, for different assumptions on the neutrino mass repartition, and different high and low multipole CMB likelihoods.

  17. Project Interface Requirements Process Including Shuttle Lessons Learned

    Science.gov (United States)

    Bauch, Garland T.

    2010-01-01

    Most failures occur at interfaces between organizations and hardware. Processing interface requirements at the start of a project life cycle will reduce the likelihood of costly interface changes/failures later. This can be done by adding Interface Control Documents (ICDs) to the Project top level drawing tree, providing technical direction to the Projects for interface requirements, and by funding the interface requirements function directly from the Project Manager's office. The interface requirements function within the Project Systems Engineering and Integration (SE&I) Office would work in-line with the project element design engineers early in the life cycle to enhance communications and negotiate technical issues between the elements. This function would work as the technical arm of the Project Manager to help ensure that the Project cost, schedule, and risk objectives can be met during the Life Cycle. Some ICD Lessons Learned during the Space Shuttle Program (SSP) Life Cycle will include the use of hardware interface photos in the ICD, progressive life cycle design certification by analysis, test, & operations experience, assigning interface design engineers to Element Interface (EI) and Project technical panels, and linking interface design drawings with project build drawings

  18. Analysis

    CERN Document Server

    Maurin, Krzysztof

    1980-01-01

    The extraordinarily rapid advances made in mathematics since World War II have resulted in analysis becoming an enormous organism spread­ ing in all directions. Gone for good surely are the days of the great French "courses of analysis" which embodied the whole of the "ana­ lytical" knowledge of the times in three volumes-as the classical work of Camille Jordan. Perhaps that is why present-day textbooks of anal­ ysis are disproportionately modest relative to the present state of the art. More: they have "retreated" to the state before Jordan and Goursat. In recent years the scene has been changing rapidly: Jean Dieudon­ ne is offering us his monumentel Elements d'Analyse (10 volumes) written in the spirit of the great French Course d'Analyse. To the best of my knowledge, the present book is the only one of its size: starting from scratch-from rational numbers, to be precise-it goes on to the theory of distributions, direct integrals, analysis on com­ plex manifolds, Kahler manifolds, the theory of sheave...

  19. Prediction of mill performance

    Energy Technology Data Exchange (ETDEWEB)

    P.A. Bennett [CoalTech Pty Ltd. (Australia)

    2005-07-01

    This Australian Coal Association Research Program (ACARP) project aimed to demonstrate that the Hardgrove Grindability Index (HGI) coupled with standard Petrographic Analysis can be used to greatly improve the prediction of mill power requirements, mill throughput and product size. The project examined the mill test data from ACIRL's pilot scale vertical spindle mill on 96 coals. A total of 360 mill tests, conducted under a wide range of throughputs, roll pressures and classifier settings, were included into the data set. The mill performance of maceral groups or microlithotypes was assumed to be additive, that is, each maceral group or microlithotype behaved independently and a size fraction of the product PF was the volume weighted sum of the petrographic components of that size fraction. Based on this assumption it was possible to determine the size distribution of the product PF, for a wide range of milling conditions, based solely on petrographic analysis. Microlithotypes were not determined directly but were estimated from the maceral analysis. The size distribution of individual maceral groups or microlithotypes can also be estimated based on developed correlations. Size distribution determined from petrographic analysis proved to be a better estimate than that determined from the HGI. Mill power can be estimated from petrographic analysis, but the HGI was found to be a better predictor of mill power. 19 refs., 4 figs., 1 tab.

  20. Magnetic properties of nickel halide hydrates including deuteration effects

    Energy Technology Data Exchange (ETDEWEB)

    DeFotis, G.C., E-mail: gxdefo@wm.edu [Chemistry Department, College of William & Mary, Williamsburg, VA, 23187 United States (United States); Van Dongen, M.J.; Hampton, A.S.; Komatsu, C.H.; Trowell, K.T.; Havas, K.C.; Davis, C.M.; DeSanto, C.L. [Chemistry Department, College of William & Mary, Williamsburg, VA, 23187 United States (United States); Hays, K.; Wagner, M.J. [Chemistry Department, George Washington University, Washington, DC, 20052 United States (United States)

    2017-01-01

    Magnetic measurements on variously hydrated nickel chlorides and bromides, including deuterated forms, are reported. Results include locations and sizes of susceptibility maxima, T{sub max} and χ{sub max}, ordering temperatures T{sub c}, Curie constants and Weiss theta in the paramagnetic regime, and primary and secondary exchange interactions from analysis of low temperature data. For the latter a 2D Heisenberg model augmented by interlayer exchange in a mean-field approximation is applied. Magnetization data to 16 kG as a function of temperature show curvature and hysteresis characteristics quite system dependent. For four materials high field magnetization data to 70 kG at 2.00 K are also obtained. Comparison is made with theoretical relations for spin-1 models. Trends are apparent, primarily that T{sub max} of each bromide hydrate is less than for the corresponding chloride, and that for a given halide nD{sub 2}O (n=1 or 2) deuterates exhibit lesser T{sub max} than do nH{sub 2}O hydrates. A monoclinic unit cell determined from powder X-ray diffraction data on NiBr{sub 2}·2D{sub 2}O is different from and slightly larger than that of NiBr{sub 2}·2H{sub 2}O. This provides some rationale for the difference in magnetic properties between these. - Highlights: • The magnetism of Ni(II) chloride and bromide dihydrates and monohydrates is studied. • Effects of replacing H{sub 2}O by D{sub 2}O are examined for both hydration states and both halides. • Exchange interactions in bromides are weaker than in corresponding chlorides. • Exchange interactions are weaker in D{sub 2}O than in corresponding H{sub 2}O containing systems. • The unit cell of NiBr{sub 2}·2D{sub 2}O is different from and slightly larger than that of NiBr{sub 2}·2H{sub 2}O.

  1. Analysis of pCERC7, a small antibiotic resistance plasmid from a commensal ST131 Escherichia coli, defines a diverse group of plasmids that include various segments adjacent to a multimer resolution site and encode the same NikA relaxase accessory protein enabling mobilisation.

    Science.gov (United States)

    Moran, Robert A; Hall, Ruth M

    2017-01-01

    The ampicillin resistance plasmid pCERC7, carrying transposon Tn2 with an IS4 insertion, was detected in the draft genome of a commensal Escherichia coli isolate. The genome data also revealed that this isolate belongs to ST131, clade B. pCERC7 is 9712bp comprised of a 3319bp backbone, Tn2::IS4 (6388bp) and 5bp of target site duplication, and was present at a copy number of 40. pCERC7 is related to several plasmids composed of only the backbone, or the backbone with the Tn2 insertion in the same position. These plasmids have been found previously in Escherichia coli or Salmonella enterica recovered in several different countries from as early as the 1970s. This group was named the NTP16 group after the best studied example. pCERC7 was annotated using available information about plasmids in this group and additional analyses. The backbone includes genes for RNA I and RNA II to initiate replication and the Tn2 interrupts a gene found here to encode a protein 66% identical to the Rom regulatory protein of ColE1. NTP16 family plasmids include a gene, previously designated mobA, that was found to encode a homologue (53% identical) of the NikA relaxase accessory protein of the conjugative IncI1 plasmid R64, which is known to bind to the R64 oriT. However, a nikB relaxase gene is not present, indicating that a relaxase must be supplied in trans for mobilisation by R64 to occur, as demonstrated previously for NTP16. Hence, MobA of NTP16 and relatives was renamed NikA. Upstream of nikA, we found a region closely related to the oriT of R64. pCERC7 and all members of the NTP16 family also include a multimer resolution site, nmr, similar to the cer site of ColE1. The backbone of the NTP16 family also includes genes for a demonstrated toxin-antitoxin system, LsoAB. Several more distantly related groups of plasmids that include a very closely related nmr-nikA-oriT segment (99.4-93.7% DNA identity) were identified in the GenBank non-redundant DNA database. All use an RNA I/RNA II

  2. Monitoring of tritium-contaminated surfaces, including skin

    International Nuclear Information System (INIS)

    Surette, R.A.; Wood, M.J.

    1994-05-01

    We have examined various commercially available tritium surface contamination monitors along with different swipe media and techniques for direct and indirect (swipe) monitoring of contaminated surfaces, including skin. None of the methods or instruments evaluated were more sensitive than the swipe and liquid scintillation counting (LSC) method. Swipe measurements with open-window proportional counters were, in general, less than half as sensitive as LSC, but have the advantages of having the results available almost immediately, and no sample preparation is required. The Nuclear Measurement Corporation's PC-55 is the most suitable instrument we tested for the analysis of routine swipe measurement. The PC-55 was about one third as sensitive as LSC when used with Ontario Hydro filter paper swipe media. Surface contamination measurement results can be obtained within minutes using the PC-55, compared to hours using LSC. The selection of swipe media for use with proportional counter-based instruments is critical. A medium that is electrically insulating can develop an electrostatic charge on its surface; this may alter the field gradient in the detector and may adversely influence the results. Although the PC-55 is sufficiently sensitive and very convenient, operational experience with the instrument is needed before recommending that it replace current LSC methods. The PC-55's susceptibility to internal tritium contamination may limit its practical usefulness. Because of the complexity of using live animals to evaluate direct and indirect methods for assessing skin contamination, pig skin was investigated as a possible substitute. We concluded that, for the first few hours post-exposure, pig skin mimics the kinetics of animal skin that has contacted a tritium-contaminated surface. (author). 30 refs., 1 tab., 7 figs

  3. An analysis on the roles of angiogenesis-related factors including serum vitamin D, soluble endoglin (sEng), soluble fms-like tyrosine kinase 1 (sFlt1), and vascular endothelial growth factor (VEGF) in the diagnosis and severity of late-onset preeclampsia.

    Science.gov (United States)

    Cim, Numan; Kurdoglu, Mertihan; Ege, Serhat; Yoruk, Ibrahim; Yaman, Gorkem; Yildizhan, Recep

    2017-07-01

    The aim of this study was to evaluate the roles of proangiogenic factors including serum vitamin D and vascular endothelial growth factor (VEGF) and anti-angiogenic factors including soluble endoglin (sEng) and soluble fms-like tyrosine kinase 1 (sFlt1) in the diagnosis and severity of late-onset preeclampsia. The study was conducted at Yuzuncu Yil University Research and Education Hospital Department of Gynecology and Obstetrics. The study included a patient group of 40 women with late-onset preeclampsia who were pregnant at ≥32 weeks of gestation according to the last menstrual period (LMP) or ultrasonographic fetal biometric measurement and a control group of 40 healthy pregnant women who presented to our clinic for routine pregnancy examination and were at the same age and gestational period with those in the patient group. The two groups were compared in terms of maternal age, gravida, parity, week of gestation, systolic/diastolic blood pressure, total protein in spot urine sample, 24-h urine protein, white blood cell (WBC), hemoglobin (Hgb), platelet count, urea, creatinine, liver function tests (AST, ALT, LDH), vitamin D 3 , 25(OH) vitamin D 3 , 1,25(OH) vitamin D 3 , sEng, sFlt1, and VEGF levels, mode of delivery, the infant APGAR score at 1 and 5 min after delivery, and infant weight at delivery. The groups were similar in terms of age, gravida, parity, week of gestation, serum vitamin D 3 , 25(OH) vitamin D 3 , 1,25(OH) 2 vitamin D 3 and VEGF levels, and infant weight at delivery (p > 0.05). Systolic/diastolic blood pressure, total protein in spot urine sample, 24-h urine protein, WBC, Hgb, serum urea, creatine, AST, ALT, and LDH were significantly higher in the preeclamptic group compared to the healthy group (p preeclampsia compared to the women with mild preeclampsia (p preeclampsia (p > 0.05). Both sEng and sFlt1 levels are remarkably high in patients with late-onset preeclampsia; however, only sEng may be a useful tool in the

  4. Haemophilus influenzae Disease (Including Hib) Diagnosis and Treatment

    Science.gov (United States)

    ... Search Form Controls Cancel Submit Search The CDC Haemophilus influenzae Disease (Including Hib) Note: Javascript is disabled or ... Page Diagnosis Treatment Complications Diagnosis Doctors usually diagnose Haemophilus influenzae , including H. influenzae type b or Hib, infection ...

  5. Should Relational Aggression Be Included in DSM-V?

    Science.gov (United States)

    Keenan, Kate; Coyne, Claire; Lahey, Benjamin B.

    2008-01-01