WorldWideScience

Sample records for included fixed effects

  1. Fix my child: The importance of including siblings in clinical assessments.

    Science.gov (United States)

    Farnfield, Steve

    2017-07-01

    This study examined concordance in the attachment strategies of school-aged siblings with reference to environmental risk in terms of poverty and maltreatment. It also investigated the effect of child maltreatment and maternal mental illness on children's psychosocial functioning in terms of the Dynamic-Maturational Model of Attachment and Adaptation (DMM) including unresolved trauma and the DMM Depressed modifier. The attachment strategies of 30 sibling pairs, aged 5-14 years, were assessed using the School-age Assessment of Attachment (SAA). Unlike most previous studies, this study included siblings from large families of two to six children. The main finding was that as environmental risk increases, the diversity of sibling attachment strategies decreases with greater recourse to the DMM Type A3-6 and A/C strategies. Unlike previous studies, the highest level of concordance was found in sibling pairs with the opposite gender. Boys whose mothers had a history of mental illness were significantly more likely than girls to be assessed with the DMM-depression modifier. As danger increases, children in the same family experience more of the same childhood. Further research should focus on single case, intra-familial studies to build a systemic model of the shared environment. Research should also evaluate the effects of environmental risk compared with size of the sibling group on children's attachment strategies. The clinical implications point to the importance of assessing all children in the family using a model built around functional formulation rather than diagnosing the symptoms of a particular child.

  2. 48 CFR 852.236-83 - Payments under fixed-price construction contracts (including NAS).

    Science.gov (United States)

    2010-10-01

    ... (CPM) network. (4) The CPM network shall include a separate cost loaded activity for adjusting and... shall show on the critical path method (CPM) network the total cost of the guarantee period services in... contracting officer. The activity on the CPM shall have money only and not activity time. (ii) The contractor...

  3. Effect of Fixed Metallic Oral Appliances on Oral Health.

    Science.gov (United States)

    Alnazzawi, Ahmad

    2018-01-01

    There is a substantial proportion of the population using fixed metallic oral appliances, such as crowns and bridges, which are composed of various dental alloys. These restorations may be associated with a number of effects on oral health with variable degrees of severity, to review potential effects of using fixed metallic oral appliances, fabricated from various alloys. The MEDLINE/PubMed database was searched using certain combinations of keywords related to the topic. The search revealed that burning mouth syndrome, oral pigmentation, hypersensitivity and lichenoid reactions, and genotoxic and cytotoxic effects are the major potential oral health changes associated with fixed prosthodontic appliances. Certain oral disorders are associated with the use of fixed metallic oral appliances. Patch test is the most reliable method that can be applied for identifying metal allergy, and the simultaneous use of different alloys in the mouth is discouraged.

  4. Contamination effects on fixed-bias Langmuir probes

    Energy Technology Data Exchange (ETDEWEB)

    Steigies, C. T. [Institut fuer Experimentelle und Angewandte Physik, Christian-Albrechts-Universitaet zu Kiel, 24098 Kiel (Germany); Barjatya, A. [Department of Physical Sciences, Embry-Riddle Aeronautical University, Daytona Beach, Florida 32114 (United States)

    2012-11-15

    Langmuir probes are standard instruments for plasma density measurements on many sounding rockets. These probes can be operated in swept-bias as well as in fixed-bias modes. In swept-bias Langmuir probes, contamination effects are frequently visible as a hysteresis between consecutive up and down voltage ramps. This hysteresis, if not corrected, leads to poorly determined plasma densities and temperatures. With a properly chosen sweep function, the contamination parameters can be determined from the measurements and correct plasma parameters can then be determined. In this paper, we study the contamination effects on fixed-bias Langmuir probes, where no hysteresis type effect is seen in the data. Even though the contamination is not evident from the measurements, it does affect the plasma density fluctuation spectrum as measured by the fixed-bias Langmuir probe. We model the contamination as a simple resistor-capacitor circuit between the probe surface and the plasma. We find that measurements of small scale plasma fluctuations (meter to sub-meter scale) along a rocket trajectory are not affected, but the measured amplitude of large scale plasma density variation (tens of meters or larger) is attenuated. From the model calculations, we determine amplitude and cross-over frequency of the contamination effect on fixed-bias probes for different contamination parameters. The model results also show that a fixed bias probe operating in the ion-saturation region is affected less by contamination as compared to a fixed bias probe operating in the electron saturation region.

  5. Improved Inference of Heteroscedastic Fixed Effects Models

    Directory of Open Access Journals (Sweden)

    Afshan Saeed

    2016-12-01

    Full Text Available Heteroscedasticity is a stern problem that distorts estimation and testing of panel data model (PDM. Arellano (1987 proposed the White (1980 estimator for PDM with heteroscedastic errors but it provides erroneous inference for the data sets including high leverage points. In this paper, our attempt is to improve heteroscedastic consistent covariance matrix estimator (HCCME for panel dataset with high leverage points. To draw robust inference for the PDM, our focus is to improve kernel bootstrap estimators, proposed by Racine and MacKinnon (2007. The Monte Carlo scheme is used for assertion of the results.

  6. Total effective dose equivalent associated with fixed uranium surface contamination

    International Nuclear Information System (INIS)

    Bogard, J.S.; Hamm, R.N.; Ashley, J.C.; Turner, J.E.; England, C.A.; Swenson, D.E.; Brown, K.S.

    1997-04-01

    This report provides the technical basis for establishing a uranium fixed-contamination action level, a fixed uranium surface contamination level exceeding the total radioactivity values of Appendix D of Title 10, Code of Federal Regulations, part 835 (10CFR835), but below which the monitoring, posting, and control requirements for Radiological Areas are not required for the area of the contamination. An area of fixed uranium contamination between 1,000 dpm/100 cm 2 and that level corresponding to an annual total effective dose equivalent (TEDE) of 100 mrem requires only routine monitoring, posting to alert personnel of the contamination, and administrative control. The more extensive requirements for monitoring, posting, and control designated by 10CFR835 for Radiological Areas do not have to be applied for these intermediate fixed-contamination levels

  7. Testing effective string models of black holes with fixed scalars

    International Nuclear Information System (INIS)

    Krasnitz, M.; Klebanov, I.R.

    1997-01-01

    We solve the problem of mixing between the fixed scalar and metric fluctuations. First, we derive the decoupled fixed scalar equation for the four-dimensional black hole with two different charges. We proceed to the five-dimensional black hole with different electric (one-brane) and magnetic (five-brane) charges, and derive two decoupled equations satisfied by appropriate mixtures of the original fixed scalar fields. The resulting greybody factors are proportional to those that follow from coupling to dimension (2,2) operators on the effective string. In general, however, the string action also contains couplings to chiral operators of dimension (1,3) and (3,1), which cause disagreements with the semiclassical absorption cross sections. Implications of this for the effective string models are discussed. copyright 1997 The American Physical Society

  8. Effectiveness evaluation of alternative fixed-site safeguard security systems

    International Nuclear Information System (INIS)

    Chapman, L.D.

    1976-01-01

    An evaluation of a fixed-site physical protection system must consider the interrelationships of barriers, alarms, on-site and off-site guards, and their effectiveness against a forcible adversary attack intent on creating an act of sabotage of theft. A computer model, Forcible Entry Safeguard Effectiveness Model (FESEM), was developed for the evaluation of alternative fixed-site protection systems. It was written in the GASP IV simulation language. A hypothetical fixed-state protection system is defined and relative evaluations from a cost-effectiveness point of view are presented in order to demonstrate how the model can be used. Trade-offs involving on-site and off-site response forces and response times, perimeter system alarms, barrier configurations, and varying levels of threat are analyzed. The computer model provides a framework for performing inexpensive experiments on fixed-site security systems, for testing alternative decisions, and for determining the relative cost effectiveness associated with these decision policies

  9. Persistence Heterogeneity Testing in Panels with Interactive Fixed Effects

    DEFF Research Database (Denmark)

    Ergemen, Yunus Emre; Velasco, Carlos

    We consider large N,T panel data models with fixed effects, a common factor allowing for cross-section dependence, and persistent data and shocks, which are assumed fractionally integrated. In a basic setup, the main interest is on the fractional parameter of the idiosyncratic component, which...

  10. Comparing fixed effects and covariance structure estimators for panel data

    DEFF Research Database (Denmark)

    Ejrnæs, Mette; Holm, Anders

    2006-01-01

    In this article, the authors compare the traditional econometric fixed effect estimator with the maximum likelihood estimator implied by covariance structure models for panel data. Their findings are that the maximum like lipoid estimator is remarkably robust to certain types of misspecifications...

  11. Beyond the technological fix. [Detrimental and unforeseen side effects

    Energy Technology Data Exchange (ETDEWEB)

    Weinberg, A.M.

    1978-03-01

    Both technological and social fixes are likely to bring with them deterimental and unforeseen side effects. Although the perceived side effects of nuclear energy can undoubtedly be ameliorated by improved technology, a permanent institutional infrastructure will probably also be required. It is pointed out that confinement of nuclear energy to relatively few large sites rather than many small sites may be a first step toward creating this permanent institutional infrastructure.

  12. BIOLOGIC AND ECONOMIC EFFECTS OF INCLUDING DIFFERENT ...

    African Journals Online (AJOL)

    The biologic and economic effects of including three agro-industrial by-products as ingredients in turkey poult diets were investigated using 48 turkey poults in a completely randomised design experiment. Diets were formulated to contain the three by-products – wheat offal, rice husk and palm kernel meal, each at 20% level ...

  13. MOS modeling hierarchy including radiation effects

    International Nuclear Information System (INIS)

    Alexander, D.R.; Turfler, R.M.

    1975-01-01

    A hierarchy of modeling procedures has been developed for MOS transistors, circuit blocks, and integrated circuits which include the effects of total dose radiation and photocurrent response. The models were developed for use with the SCEPTRE circuit analysis program, but the techniques are suitable for other modern computer aided analysis programs. The modeling hierarchy permits the designer or analyst to select the level of modeling complexity consistent with circuit size, parametric information, and accuracy requirements. Improvements have been made in the implementation of important second order effects in the transistor MOS model, in the definition of MOS building block models, and in the development of composite terminal models for MOS integrated circuits

  14. Rate of Clinical Complete Response for 1 Year or More in Bone-Metastatic Breast Cancer after Comprehensive Treatments including Autologous Formalin-Fixed Tumor Vaccine.

    Science.gov (United States)

    Kuranishi, Fumito; Imaoka, Yuki; Sumi, Yuusuke; Uemae, Yoji; Yasuda-Kurihara, Hiroko; Ishihara, Takeshi; Miyazaki, Tsubasa; Ohno, Tadao

    2018-01-01

    No effective treatment has been developed for bone-metastatic breast cancer. We found 3 cases with clinical complete response (cCR) of the bone metastasis and longer overall survival of the retrospectively examined cohort treated comprehensively including autologous formalin-fixed tumor vaccine (AFTV). AFTV was prepared individually for each patient from their own formalin-fixed and paraffin-embedded breast cancer tissues. Three patients maintained cCR status of the bone metastasis for 17 months or more. Rate of cCR for 1 year or more appeared to be 15% (3/20) after comprehensive treatments including AFTV. The median overall survival time (60.0 months) and the 3- to 8-year survival rates after diagnosis of bone metastasis were greater than those of historical control cohorts in Japan (1988-2002) and in the nationwide population-based cohort study of Denmark (1999-2007). Bone-metastatic breast cancer may be curable after comprehensive treatments including AFTV, although larger scale clinical trial is required.

  15. Rate of Clinical Complete Response for 1 Year or More in Bone-Metastatic Breast Cancer after Comprehensive Treatments including Autologous Formalin-Fixed Tumor Vaccine

    Directory of Open Access Journals (Sweden)

    Fumito Kuranishi

    2018-01-01

    Full Text Available Introduction. No effective treatment has been developed for bone-metastatic breast cancer. We found 3 cases with clinical complete response (cCR of the bone metastasis and longer overall survival of the retrospectively examined cohort treated comprehensively including autologous formalin-fixed tumor vaccine (AFTV. Patients and Methods. AFTV was prepared individually for each patient from their own formalin-fixed and paraffin-embedded breast cancer tissues. Results. Three patients maintained cCR status of the bone metastasis for 17 months or more. Rate of cCR for 1 year or more appeared to be 15% (3/20 after comprehensive treatments including AFTV. The median overall survival time (60.0 months and the 3- to 8-year survival rates after diagnosis of bone metastasis were greater than those of historical control cohorts in Japan (1988–2002 and in the nationwide population-based cohort study of Denmark (1999–2007. Conclusion. Bone-metastatic breast cancer may be curable after comprehensive treatments including AFTV, although larger scale clinical trial is required.

  16. Spillover adherence effects of fixed-dose combination HIV therapy

    Directory of Open Access Journals (Sweden)

    Kauf TL

    2012-02-01

    Full Text Available Teresa L Kauf1, Keith L Davis2, Stephanie R Earnshaw2, E Anne Davis31Department of Pharmaceutical Outcomes and Policy, College of Pharmacy, University of Florida, Gainesville, FL, 2RTI Health Solutions, Research Triangle Park, NC, 3Independent consultant, Pittsboro, NC, USAAbstract: The impact of fixed-dose combination (FDC products on adherence to other, non-fixed regimen components has not been examined. We compared adherence to a third antiretroviral (ART component among patients receiving a nucleoside reverse transcriptase inhibitor (NRTI backbone consisting of the FDC Epzicom®, GlaxoSmithKline Inc, Research Triangle Park, NC (abacavir sulfate 600 mg + lamivudine 300 mg; FDC group versus NRTI combinations taken as two separate pills (NRTI Combo group using data from a national sample of 30 health plans covering approximately 38 million lives from 1997 to 2005. Adherence was measured as the medication possession ratio (MPR. Multivariate logistic regression compared treatment groups based on the likelihood of achieving ≥95% adherence, with sensitivity analyses using alternative thresholds. MPR was assessed as a continuous variable using multivariate linear regression. Covariates included age, gender, insurance payer type, year of study drug initiation, presence of mental health and substance abuse disorders, and third agent class. The study sample consisted of 650 FDC and 1947 NRTI Combo patients. Unadjusted mean adherence to the third agent was higher in the FDC group than the NRTI Combo group (0.92 vs 0.85; P < 0.0001. In regression analyses, FDC patients were 48% and 39% more likely to achieve 95% and 90% third agent adherence, respectively (P ≤ 0.03. None of the other MPR specifications achieved comparable results. Among managed care patients, use of an FDC appears to substantially improve adherence to a third regimen component and thus the likelihood of achieving the accepted standard for adherence to HIV therapy of 95%.Keywords

  17. Clinical Effectiveness of Using Aesthetic Fixed Prosthetic Appliances with Combined Occlusal Surface

    OpenAIRE

    Andrii Biben; Zinovii Ozhohan

    2017-01-01

    The objective of the research was to evaluate the clinical effectiveness of using aesthetic fixed prosthetic appliances with combined occlusal surface. Materials and methods. The study included 30 patients who were divided into 2 groups: Group I included 20 patients with combined occlusal surface of the crowns; Group II included 22 patients with ceramic occlusal surface of the crowns. The patients were observed 3, 6 and 12 months after prosthetic repair. Results. 6 months after prosthet...

  18. Differences in Tribological Behaviors upon Switching Fixed and Moving Materials of Tribo-pairs including Metal and Polymer.

    Science.gov (United States)

    Xu, Aijie; Tian, Pengyi; Wen, Shizhu; Guo, Fei; Hu, Yueqiang; Jia, Wenpeng; Dong, Conglin; Tian, Yu

    2017-10-12

    The coefficient of friction (COF) between two materials is usually believed to be an intrinsic property of the materials themselves. In this study, metals of stainless steel (304) and brass (H62), and polymers of polypropylene (PP) and polytetrafluoroethylene (PTFE) were tested on a standard ball-on-three-plates test machine. Significantly different tribological behaviors were observed when fixed and moving materials of tribo-pairs (metal/polymer) were switched. As an example, under the same applied load and rotating speed, the COF (0.49) between a rotating PP ball and three fixed H62 plates was approximately 2.3 times higher than that between switched materials of tribo-pairs. Meanwhile, the COF between H62 and PTFE was relatively stable. The unexpected tribological behaviors were ascribed to the thermal and mechanical properties of tribo-pairs. Theoretical analysis revealed that the differences in the maximum local temperature between switching the fixed and moving materials of tribo-pairs were consistent with the differences in the tested COF. This result indicated the precise prediction of the COF of two materials is complexcity, and that thermal and mechanical properties should be properly considered in designing tribo-pairs, because these properties may significantly affect tribological performance.

  19. Accounting for Missing Correlation Coefficients in Fixed-Effects MASEM.

    Science.gov (United States)

    Jak, Suzanne; Cheung, Mike W-L

    2018-01-01

    Meta-analytic structural equation modeling (MASEM) is increasingly applied to advance theories by synthesizing existing findings. MASEM essentially consists of two stages. In Stage 1, a pooled correlation matrix is estimated based on the reported correlation coefficients in the individual studies. In Stage 2, a structural model (such as a path model) is fitted to explain the pooled correlations. Frequently, the individual studies do not provide all the correlation coefficients between the research variables. In this study, we modify the currently optimal MASEM-method to deal with missing correlation coefficients, and compare its performance with existing methods. This study is the first to evaluate the performance of fixed-effects MASEM methods under different levels of missing correlation coefficients. We found that the often used univariate methods performed very poorly, while the multivariate methods performed well overall.

  20. Vibration of Piezoelectric Nanowires Including Surface Effects

    Directory of Open Access Journals (Sweden)

    R. Ansari

    2014-04-01

    Full Text Available In this paper, surface and piezoelectric effects on the vibration behavior of nanowires (NWs are investigated by using a Timoshenko beam model. The electric field equations and the governing equations of motion for the piezoelectric NWs are derived with the consideration of surface effects. By the exact solution of the governing equations, an expression for the natural frequencies of NWs with simply-supported boundary conditions is obtained. The effects of piezoelectricity and surface effects on the vibrational behavior of Timoshenko NWs are graphically illustrated. A comparison is also made between the predictions of Timoshenko beam model and those of its Euler-Bernoulli counterpart. Additionally, the present results are validated through comparison with the available data in the literature.

  1. Trinucleon asymptotic normalization constants including Coulomb effects

    International Nuclear Information System (INIS)

    Friar, J.L.; Gibson, B.F.; Lehman, D.R.; Payne, G.L.

    1982-01-01

    Exact theoretical expressions for calculating the trinucleon S- and D-wave asymptotic normalization constants, with and without Coulomb effects, are presented. Coordinate-space Faddeev-type equations are used to generate the trinucleon wave functions, and integral relations for the asymptotic norms are derived within this framework. The definition of the asymptotic norms in the presence of the Coulomb interaction is emphasized. Numerical calculations are carried out for the s-wave NN interaction models of Malfliet and Tjon and the tensor force model of Reid. Comparison with previously published results is made. The first estimate of Coulomb effects for the D-wave asymptotic norm is given. All theoretical values are carefully compared with experiment and suggestions are made for improving the experimental situation. We find that Coulomb effects increase the 3 He S-wave asymptotic norm by less than 1% relative to that of 3 H, that Coulomb effects decrease the 3 He D-wave asymptotic norm by approximately 8% relative to that of 3 H, and that the distorted-wave Born approximation D-state parameter, D 2 , is only 1% smaller in magnitude for 3 He than for 3 H due to compensating Coulomb effects

  2. Effectiveness of probiotics in the prevention of carious lesions during treatment with fixed orthodontic appliances.

    Directory of Open Access Journals (Sweden)

    Paula Contreras

    2017-07-01

    Full Text Available The difficulty experienced by patients with fixed orthodontic appliances in maintaining adequate oral hygiene poses a risk for dental caries. The use of probiotics has been proposed as a means of prevention. The following systematic review aims to determine the effectiveness of probiotics in the prevention of dental caries during treatment with fixed orthodontic appliances. This review was carried out according to the PRISMA guidelines. A comprehensive electronic search was conducted in the Cochrane Library, EMBASE, PubMed and Google Scholar Beta databases. The inclusion criteria included randomized controlled clinical trials involving the use of probiotics, caries and patients under fixed orthodontic treatment. The methodological quality of the articles was evaluated according to risk of bias. Of the five included studies, three reported significant differences compared to the control group. Of the others, one article reported significant decrease in the final count of microorganisms compared to the beginning of treatment. Only one study reported no differences of any kind. It was estimated that the eligible studies were of moderate methodological quality and had an unclear risk of bias, without affecting key domains for the research. It is concluded that the daily consumption of probiotics can be effective in the prevention of carious lesions in patients under fixed orthodontic treatment. However, this should be interpreted with caution and corroborated by clinical trials of better methodological quality.

  3. Jet-calculus approach including coherence effects

    International Nuclear Information System (INIS)

    Jones, L.M.; Migneron, R.; Narayanan, K.S.S.

    1987-01-01

    We show how integrodifferential equations typical of jet calculus can be combined with an averaging procedure to obtain jet-calculus-based results including the Mueller interference graphs. Results in longitudinal-momentum fraction x for physical quantities are higher at intermediate x and lower at large x than with the conventional ''incoherent'' jet calculus. These results resemble those of Marchesini and Webber, who used a Monte Carlo approach based on the same dynamics

  4. Growth and energy nexus in Europe revisited: Evidence from a fixed effects political economy model

    International Nuclear Information System (INIS)

    Menegaki, Angeliki N.; Ozturk, Ilhan

    2013-01-01

    This is an empirical study on the causal relationship between economic growth and energy for 26 European countries in a multivariate panel framework over the period 1975–2009 using a two-way fixed effects model and including greenhouse gas emissions, capital, fossil energy consumption, Herfindahl index (political competition) and number of years the government chief executive stays in office (political stability) as independent variables in the model. Empirical results confirm bidirectional causality between growth and political stability, capital and political stability, capital and fossil energy consumption. Whether political stability favors the implementation of growth or leads to corruption demands further research. - Highlights: • Economic growth and energy for 26 European countries is examined. • Two-way fixed effects model with political economy variables is employed. • Bidirectional causality is observed between growth and political stability

  5. Use of Fixed Effects Models to Analyze Self-Controlled Case Series Data in Vaccine Safety Studies.

    Science.gov (United States)

    Xu, Stanley; Zeng, Chan; Newcomer, Sophia; Nelson, Jennifer; Glanz, Jason

    2012-04-19

    Conditional Poisson models have been used to analyze vaccine safety data from self-controlled case series (SCCS) design. In this paper, we derived the likelihood function of fixed effects models in analyzing SCCS data and showed that the likelihoods from fixed effects models and conditional Poisson models were proportional. Thus, the maximum likelihood estimates (MLEs) of time-varying variables including vaccination effect from fixed effects model and conditional Poisson model were equal. We performed a simulation study to compare empirical type I errors, means and standard errors of vaccination effect coefficient, and empirical powers among conditional Poisson models, fixed effects models, and generalized estimating equations (GEE), which has been commonly used for analyzing longitudinal data. Simulation study showed that both fixed effect models and conditional Poisson models generated the same estimates and standard errors for time-varying variables while GEE approach produced different results for some data sets. We also analyzed SCCS data from a vaccine safety study examining the association between measles mumps-rubella (MMR) vaccination and idiopathic thrombocytopenic purpura (ITP). In analyzing MMR-ITP data, likelihood-based statistical tests were employed to test the impact of time-invariant variable on vaccination effect. In addition a complex semi-parametric model was fitted by simply treating unique event days as indicator variables in the fixed effects model. We conclude that theoretically fixed effects models provide identical MLEs as conditional Poisson models. Because fixed effect models are likelihood based, they have potentials to address methodological issues in vaccine safety studies such as how to identify optimal risk window and how to analyze SCCS data with misclassification of adverse events.

  6. Treatment effects of the Jasper Jumper and the Bionator associated with fixed appliances.

    Science.gov (United States)

    Neves, Leniana Santos; Janson, Guilherme; Cançado, Rodrigo Hermont; de Lima, Karina Jerônimo Rodrigues Santiago; Fernandes, Thaís Maria Freire; Henriques, José Fernando Castanha

    2014-01-01

    The aim of this study was to evaluate the effects of Class II malocclusion treatment with the Jasper Jumper and the Bionator, associated with fixed appliances. The sample comprised 77 young individuals divided into 3 groups: Group 1 consisted of 25 patients treated with the Jasper Jumper appliance associated with fixed appliances for a mean period of 2.15 years; group 2 had 30 patients, treated with the Bionator and fixed appliances, for a mean treatment time of 3.92 years; and the control group included 22 subjects followed for a mean period of 2.13 years. The initial and final lateral cephalograms of the patients were evaluated. Intergroup comparison at the initial stage and of the treatment changes were performed by analysis of variance. Their effects consisted in a restrictive effect on the maxilla, a slight increase in anterior face height, retrusion and extrusion of the maxillary incisors, labial tipping and protrusion of the mandibular incisors in both groups and intrusion with the Jasper Jumper appliance, maxillary molar distalization with the Jasper Jumper, extrusion and mesialization of the mandibular molars, both appliances provided significant improvement of the maxillomandibular relationship, overjet, overbite and molar relationship. The effects of both appliances in class II malocclusion treatment are similar; however, treatment with the Jasper Jumper was shorter than with the Bionator.

  7. Analyses of fixed effects for genetic evaluation of dairy cattle using test day records in Indonesia

    Directory of Open Access Journals (Sweden)

    Asep Anang

    2010-06-01

    Full Text Available Season, rainfall, day of rain, temperature, humidity, year and farm are fixed effects, which have been reported to influence milk yield. Those factors are often linked together to contribute to the variation of milk production. This research is addressed to study the fixed effect factors, including lactation curve, which should be considered for genetic evaluation of milk yield based on test day records of dairy cattle. The data were taken from four different farms, which were PT. Taurus Dairy Farm, BPPT Cikole, Bandang Dairy Farm, and BBPTU Baturraden. In total of 16806 test day records were evaluated, consisting of 9,302 at first and 7,504 at second lactation, respectively. The results indicated that fixed effects were very specific and the influences had different patterns for each farm. Consequently, in a genetic evaluation, these factors such as lactation, temperature, year, day of rain, and humidity need to be evaluated first. Ali-Schaeffer curve represented the most appropriate curve to use in the genetic evaluation of dairy cattle in Indonesia.

  8. Long-term clinical and bacterial effects of xylitol on patients with fixed orthodontic appliances.

    Science.gov (United States)

    Masoud, Mohamed I; Allarakia, Reem; Alamoudi, Najlaa M; Nalliah, Romesh; Allareddy, Veerasathpurush

    2015-01-01

    The objective of this study was to evaluate long-term clinical and bacterial effects of using 6 g of xylitol per day for 3 months on patients with full fixed orthodontic appliances. The study was a pilot clinical trial that included 41 subjects who were undergoing orthodontic treatment. The subjects were randomly divided into three groups. Group A received xylitol chewing gum, group B received xylitol dissolvable chewable tablets, and Group C served as the control group and did not receive xylitol gums or tablets. Clinical examination and the collection of plaque and saliva samples were carried out at baseline and 3, 6, and 12 months. All three groups were given oral hygiene instruction and were put on a 6-month cleaning and topical fluoride schedule. Plaque scores and bacterial counts were used to evaluate the effectiveness of the different approaches at reducing the caries risk. Xylitol groups did not experience any more reduction in plaque score, plaque MS counts, or salivary MS counts than the control group nor did they have lower values at any of the time points. Chewing gum did not significantly increase the incidence of debonded brackets over the other groups. Xylitol does not have a clinical or bacterial benefit in patients with fixed orthodontic appliances. Oral hygiene instructions and 6-month topical fluoride application were effective at reducing plaque scores and bacterial counts in patients with full fixed appliances regardless of whether or not xylitol was used.

  9. Evaluation of the Effect of Non-Current Fixed Assets on Profitability and Asset Management Efficiency

    Science.gov (United States)

    Lubyanaya, Alexandra V.; Izmailov, Airat M.; Nikulina, Ekaterina Y.; Shaposhnikov, Vladislav A.

    2016-01-01

    The purpose of this article is to investigate the problem, which stems from non-current fixed assets affecting profitability and asset management efficiency. Tangible assets, intangible assets and financial assets are all included in non-current fixed assets. The aim of the research is to identify the impact of estimates and valuation in…

  10. Future Costs, Fixed Healthcare Budgets, and the Decision Rules of Cost-Effectiveness Analysis.

    Science.gov (United States)

    van Baal, Pieter; Meltzer, David; Brouwer, Werner

    2016-02-01

    Life-saving medical technologies result in additional demand for health care due to increased life expectancy. However, most economic evaluations do not include all medical costs that may result from this additional demand in health care and include only future costs of related illnesses. Although there has been much debate regarding the question to which extent future costs should be included from a societal perspective, the appropriate role of future medical costs in the widely adopted but more narrow healthcare perspective has been neglected. Using a theoretical model, we demonstrate that optimal decision rules for cost-effectiveness analyses assuming fixed healthcare budgets dictate that future costs of both related and unrelated medical care should be included. Practical relevance of including the costs of future unrelated medical care is illustrated using the example of transcatheter aortic valve implantation. Our findings suggest that guidelines should prescribe inclusion of these costs. Copyright © 2014 John Wiley & Sons, Ltd.

  11. Long-term clinical and bacterial effects of xylitol on patients with fixed orthodontic appliances

    OpenAIRE

    Masoud, Mohamed I.; Allarakia, Reem; Alamoudi, Najlaa M.; Nalliah, Romesh; Allareddy, Veerasathpurush

    2015-01-01

    Background The objective of this study was to evaluate long-term clinical and bacterial effects of using 6 g of xylitol per day for 3 months on patients with full fixed orthodontic appliances. Methods The study was a pilot clinical trial that included 41 subjects who were undergoing orthodontic treatment. The subjects were randomly divided into three groups. Group A received xylitol chewing gum, group B received xylitol dissolvable chewable tablets, and Group C served as the control group and...

  12. Effect of fluoridated milk on enamel demineralization adjacent to fixed orthodontic appliances

    DEFF Research Database (Denmark)

    Sköld-Larsson, Kerstin; Sollenius, Ola; Karlsson, Lena

    2012-01-01

    Abstract Objective. To investigate the effect of daily intake of fluoridated milk on enamel demineralization adjacent to fixed orthodontic brackets assessed with quantitative light-induced fluorescence (QLF). Materials and methods. Sixty-four healthy adolescents (13-18 years) undergoing orthodontic...... amount of milk without fluoride. The intervention period was 12 weeks and the end-point was mineral gain or loss in enamel, assessed by QLF on two selected sites from each individual. The attrition rate was 12.5% and 112 sites were included in the final evaluation. Results. There was no statistically...

  13. Displacement and Supplemental Effects of the Mobile Internet on Fixed Internet Use

    NARCIS (Netherlands)

    Ongena, G.; Bouwman, H.; Gillebaard, H.

    2012-01-01

    Mobile devices facilitate the use of mobile services that are similar to services used via fixed Internet connections. The objective of this article is to assess displacement effects between fixed and mobile Internet services, and to research the role of technical capabilities of mobile handsets and

  14. Fixed-Time Schedule Effects in Combination with Response-Dependent Schedules

    Science.gov (United States)

    Borrero, John C.; Bartels-Meints, Jamie A.; Sy, Jolene R.; Francisco, Monica T.

    2011-01-01

    We evaluated the effects of fixed-interval (FI), fixed-time (FT), and conjoint (combined) FI FT reinforcement schedules on the responding of 3 adults who had been diagnosed with schizophrenia. Responding on vocational tasks decreased for 2 of 3 participants under FT alone relative to FI alone. Responding under FI FT resulted in response…

  15. Estimating the Effects of Parental Divorce and Death With Fixed Effects Models

    OpenAIRE

    Amato, Paul R.; Anthony, Christopher J.

    2014-01-01

    The authors used child fixed effects models to estimate the effects of parental divorce and death on a variety of outcomes using 2 large national data sets: (a) the Early Childhood Longitudinal Study, Kindergarten Cohort (kindergarten through the 5th grade) and (b) the National Educational Longitudinal Study (8th grade to the senior year of high school). In both data sets, divorce and death were associated with multiple negative outcomes among children. Although evidence for a causal effect o...

  16. Lingual vs. labial fixed orthodontic appliances: systematic review and meta-analysis of treatment effects.

    Science.gov (United States)

    Papageorgiou, Spyridon N; Gölz, Lina; Jäger, Andreas; Eliades, Theodore; Bourauel, Christoph

    2016-04-01

    The aim of this systematic review was to compare the therapeutic and adverse effects of lingual and labial orthodontic fixed appliances from clinical trials on human patients in an evidence-based manner. Randomized and prospective non-randomized clinical trials comparing lingual and labial appliances were included. Risk of bias within and across studies was assessed using the Cochrane tool and the Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach. Random-effects meta-analyses were conducted, followed by subgroup and sensitivity analyses. Six electronic databases were searched from inception to July 2015, without limitations. A total of 13 papers pertaining to 11 clinical trials were included with a total of 407 (34% male/66% female) patients. Compared with labial appliances, lingual appliances were associated with increased overall oral discomfort, increased speech impediment (measured using auditory analysis), worse speech performance assessed by laypersons, increased eating difficulty, and decreased intermolar width. On the other hand, lingual appliances were associated with increased intercanine width and significantly decreased anchorage loss of the maxillary first molar during space closure. Based on existing trials, there is insufficient evidence to make robust recommendations for lingual fixed orthodontic appliances regarding their therapeutic or adverse effects, as the quality of evidence was low. © 2016 Eur J Oral Sci.

  17. Species Distribution Modeling: Comparison of Fixed and Mixed Effects Models Using INLA

    Directory of Open Access Journals (Sweden)

    Lara Dutra Silva

    2017-12-01

    Full Text Available Invasive alien species are among the most important, least controlled, and least reversible of human impacts on the world’s ecosystems, with negative consequences affecting biodiversity and socioeconomic systems. Species distribution models have become a fundamental tool in assessing the potential spread of invasive species in face of their native counterparts. In this study we compared two different modeling techniques: (i fixed effects models accounting for the effect of ecogeographical variables (EGVs; and (ii mixed effects models including also a Gaussian random field (GRF to model spatial correlation (Matérn covariance function. To estimate the potential distribution of Pittosporum undulatum and Morella faya (respectively, invasive and native trees, we used geo-referenced data of their distribution in Pico and São Miguel islands (Azores and topographic, climatic and land use EGVs. Fixed effects models run with maximum likelihood or the INLA (Integrated Nested Laplace Approximation approach provided very similar results, even when reducing the size of the presences data set. The addition of the GRF increased model adjustment (lower Deviance Information Criterion, particularly for the less abundant tree, M. faya. However, the random field parameters were clearly affected by sample size and species distribution pattern. A high degree of spatial autocorrelation was found and should be taken into account when modeling species distribution.

  18. A Simple Method to Estimate Large Fixed Effects Models Applied to Wage Determinants and Matching

    OpenAIRE

    Mittag, Nikolas

    2016-01-01

    Models with high dimensional sets of fixed effects are frequently used to examine, among others, linked employer-employee data, student outcomes and migration. Estimating these models is computationally difficult, so simplifying assumptions that are likely to cause bias are often invoked to make computation feasible and specification tests are rarely conducted. I present a simple method to estimate large two-way fixed effects (TWFE) and worker-firm match effect models without additional assum...

  19. The effects of fixed and removable orthodontic retainers: a systematic review

    Directory of Open Access Journals (Sweden)

    Dalya Al-Moghrabi

    2016-07-01

    Full Text Available Abstract Objective In the view of the widespread acceptance of indefinite retention, it is important to determine the effects of fixed and removable orthodontic retainers on periodontal health, survival and failure rates of retainers, cost-effectiveness, and impact of orthodontic retainers on patient-reported outcomes. Methods A comprehensive literature search was undertaken based on a defined electronic and gray literature search strategy (PROSPERO: CRD42015029169. The following databases were searched (up to October 2015; MEDLINE via OVID, PubMed, the Cochrane Central Register of Controlled Trials, LILACS, BBO, ClinicalTrials.gov, the National Research Register, and ProQuest Dissertation and Thesis database. Randomized and non-randomized controlled clinical trials, prospective cohort studies, and case series (minimum sample size of 20 with minimum follow-up periods of 6 months reporting periodontal health, survival and failure rates of retainers, cost-effectiveness, and impact of orthodontic retainers on patient-reported outcomes were identified. The Cochrane Collaboration’s Risk of Bias tool and Newcastle-Ottawa Scale were used to assess the quality of included trials. Results Twenty-four studies were identified, 18 randomized controlled trials and 6 prospective cohort studies. Of these, only 16 were deemed to be of high quality. Meta-analysis was unfeasible due to considerable clinical heterogeneity and variations in outcome measures. The mean failure risk for mandibular stainless steel fixed retainers bonded from canine to canine was 0.29 (95 % confidence interval [CI] 0.26, 0.33 and for those bonded to canines only was 0.25 (95 % CI: 0.16, 0.33. A meta-regression suggested that failure of fixed stainless steel mandibular retainers was not directly related to the period elapsed since placement (P = 0.938. Conclusion Further well-designed prospective studies are needed to elucidate the benefits and potential harms associated with

  20. Effects of mandibular protraction appliance associated to fixed appliance in adults

    Directory of Open Access Journals (Sweden)

    Bruno D'Aurea Furquim

    2013-10-01

    Full Text Available OBJECTIVE: This retrospective study aimed to conduct a cephalometric evaluation of the skeletal, dental and soft tissue effects resulting from treatment of adult patients presenting Class II malocclusion, performed with a Mandibular Protraction Appliance (MPA combined with a fixed orthodontic appliance. METHODS: The sample consisted of teleradiographs obtained before and after treatment of 9 adult patients (initial mean age of 22.48 years with bilateral Class II, division 1, malocclusion. Paired t test (p < 0.05 was applied to compare initial and final values. RESULTS: t test revealed an increase in anteroinferior facial height and posterior facial height. The dental changes include: extrusion of upper incisors, buccal inclination, protrusion of lower incisors, mesialization and extrusion of mandibular molars. Regarding the soft tissue component, there was an increase in nasolabial angle in addition to upper lip retrusion. CONCLUSIONS: The effects of treating Class II malocclusion adult patients, by means of using Mandibular Protraction Appliance (MPA combined with a fixed appliance were mostly observed in the mandibular arch, and consisted of buccal inclination, protrusion and intrusion of incisors, and mesialization and extrusion of the molars.

  1. Intergenerational continuity in attitudes: A latent variable family fixed-effects approach.

    Science.gov (United States)

    Schofield, Thomas J; Abraham, W Todd

    2017-12-01

    Attitudes are associated with behavior. Adolescents raised by parents who endorse particular attitudes are relatively more likely to endorse those same attitudes. The present study addresses conditions that would moderate intergenerational continuity in attitudes across 6 domains: authoritative parenting, conventional life goals, gender egalitarianism, deviancy, abortion, and sexual permissiveness. Hypothesized moderators included the attitudes of the other parent, and adolescent sex. Data come from a 2-generation study of a cohort of 451 adolescents (52% female), a close-aged sibling, and their parents. After employing a novel specification in which family fixed-effect models partitioned out variation at the between-family level, hypotheses were tested on the within-family variance. Unlike typical family fixed-effect models, this specification accounted for measurement error. Intergenerational continuity was not significant (deviancy), negative (sexual permissiveness), and conditional on the attitudes of the coparent (authoritative parenting, conventional life goals, and gender egalitarianism). Adolescent age, sex, and conscientiousness were accounted for in all analyses. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  2. Oracle Efficient Variable Selection in Random and Fixed Effects Panel Data Models

    DEFF Research Database (Denmark)

    Kock, Anders Bredahl

    This paper generalizes the results for the Bridge estimator of Huang et al. (2008) to linear random and fixed effects panel data models which are allowed to grow in both dimensions. In particular we show that the Bridge estimator is oracle efficient. It can correctly distinguish between relevant...... and irrelevant variables and the asymptotic distribution of the estimators of the coefficients of the relevant variables is the same as if only these had been included in the model, i.e. as if an oracle had revealed the true model prior to estimation. In the case of more explanatory variables than observations......, we prove that the Marginal Bridge estimator can asymptotically correctly distinguish between relevant and irrelevant explanatory variables. We do this without restricting the dependence between covariates and without assuming sub Gaussianity of the error terms thereby generalizing the results...

  3. Estimating the Effects of Parental Divorce and Death With Fixed Effects Models.

    Science.gov (United States)

    Amato, Paul R; Anthony, Christopher J

    2014-04-01

    The authors used child fixed effects models to estimate the effects of parental divorce and death on a variety of outcomes using 2 large national data sets: (a) the Early Childhood Longitudinal Study, Kindergarten Cohort (kindergarten through the 5th grade) and (b) the National Educational Longitudinal Study (8th grade to the senior year of high school). In both data sets, divorce and death were associated with multiple negative outcomes among children. Although evidence for a causal effect of divorce on children was reasonably strong, effect sizes were small in magnitude. A second analysis revealed a substantial degree of variability in children's outcomes following parental divorce, with some children declining, others improving, and most not changing at all. The estimated effects of divorce appeared to be strongest among children with the highest propensity to experience parental divorce.

  4. Estimating the Effects of Parental Divorce and Death With Fixed Effects Models

    Science.gov (United States)

    Amato, Paul R.; Anthony, Christopher J.

    2014-01-01

    The authors used child fixed effects models to estimate the effects of parental divorce and death on a variety of outcomes using 2 large national data sets: (a) the Early Childhood Longitudinal Study, Kindergarten Cohort (kindergarten through the 5th grade) and (b) the National Educational Longitudinal Study (8th grade to the senior year of high school). In both data sets, divorce and death were associated with multiple negative outcomes among children. Although evidence for a causal effect of divorce on children was reasonably strong, effect sizes were small in magnitude. A second analysis revealed a substantial degree of variability in children’s outcomes following parental divorce, with some children declining, others improving, and most not changing at all. The estimated effects of divorce appeared to be strongest among children with the highest propensity to experience parental divorce. PMID:24659827

  5. Relativistic effects in local inertial frames including PPN effects

    International Nuclear Information System (INIS)

    Shahid-Saless, B.

    1986-01-01

    In this dissertation they use the concept of a generalized Fermi frame to describe the relativistic effects on a body placed in a local inertial frame of reference due to local and distant sources of gravitation. They have considered, in particular, a model, consisted of two spherically symmetric gravitating sources, moving in circular orbits around a common barycenter where one of the bodies is chosen to be the local and the other the distant one. This has been done in the Parametrized-Post-Newtonian formalism using the slow motion, weak field approximation. The PPN parameters used are γ, β, zeta 1 and zeta 2 . They show that the main relativistic effect on a local satellite is described by the Schwarzchild field of the local body and the nonlinear term corresponding to the self-interaction of the local source itself. There are also much smaller terms that are proportional to the product of the potentials of local and distant bodies and distant body's self interactions. The spatial axis of the local frame undergoes Geodetic precession. Effects involving the parameters zeta 1 and zeta 2 seem to be slightly too small to be observable at the present time. In addition they have found accelerations that vanish in the general relativity limit

  6. Effect of material variation on the biomechanical behaviour of orthodontic fixed appliances: a finite element analysis.

    Science.gov (United States)

    Papageorgiou, Spyridon N; Keilig, Ludger; Hasan, Istabrak; Jäger, Andreas; Bourauel, Christoph

    2016-06-01

    Biomechanical analysis of orthodontic tooth movement is complex, as many different tissues and appliance components are involved. The aim of this finite element study was to assess the relative effect of material alteration of the various components of the orthodontic appliance on the biomechanical behaviour of tooth movement. A three-dimensional finite element solid model was constructed. The model consisted of a canine, a first, and a second premolar, including the surrounding tooth-supporting structures and fixed appliances. The materials of the orthodontic appliances were alternated between: (1) composite resin or resin-modified glass ionomer cement for the adhesive, (2) steel, titanium, ceramic, or plastic for the bracket, and (3) β-titanium or steel for the wire. After vertical activation of the first premolar by 0.5mm in occlusal direction, stress and strain calculations were performed at the periodontal ligament and the orthodontic appliance. The finite element analysis indicated that strains developed at the periodontal ligament were mainly influenced by the orthodontic wire (up to +63 per cent), followed by the bracket (up to +44 per cent) and the adhesive (up to +4 per cent). As far as developed stresses at the orthodontic appliance are concerned, wire material had the greatest influence (up to +155 per cent), followed by bracket material (up to +148 per cent) and adhesive material (up to +8 per cent). The results of this in silico study need to be validated by in vivo studies before they can be extrapolated to clinical practice. According to the results of this finite element study, all components of the orthodontic fixed appliance, including wire, bracket, and adhesive, seem to influence, to some extent, the biomechanics of tooth movement. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  7. Fixed functional appliances with multibracket appliances have no skeletal effect on the mandible: A systematic review and meta-analysis.

    Science.gov (United States)

    Ishaq, Ramy Abdul Rahman; AlHammadi, Maged Sultan; Fayed, Mona M S; El-Ezz, Amr Abou; Mostafa, Yehya

    2016-05-01

    Our aim was to assess the skeletal mandibular changes (anteroposterior and vertical) in circumpubertal patients with fixed functional appliances installed on multibracket appliances compared with untreated patients. An open-ended electronic search of 4 databases (PubMed, Embase, Cochrane Library, and Web of Science) up to April 2014 was performed. Additional searches of relevant journals, reference lists of the retrieved articles, systematic reviews, and gray literature were performed. Specific inclusion and exclusion criteria were applied to identify relevant articles. Quality was evaluated using the Cochrane Collaboration risk of bias tool and the Newcastle-Ottawa scale for prospective controlled clinical trials. Meta-analyses were conducted with fixed and random effects models as appropriate. Statistical heterogeneity was also examined. Seven articles were included in the qualitative synthesis and 5 in the meta-analysis. The included randomized controlled trials were at high risk of bias, and the methodologic quality of the prospective controlled clinical trials was high. Based on assessment of the fixed functional appliance phase in isolation, no difference in mandibular anteroposterior positional changes (SNB angle) (standard mean difference, 0.11°; 95% CI, -0.28, 0.50) was found between the treated and control groups. The vertical dimension was not influenced by the fixed functional appliance treatment. There is little high-quality evidence concerning the relative influence of fixed functional appliances on skeletal and dentoalveolar changes. However, based on the limited evidence, it appears that they have little effect on the skeletal mandibular parameters. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  8. Isotopic effects in the neon fixed point: uncertainty of the calibration data correction

    Science.gov (United States)

    Steur, Peter P. M.; Pavese, Franco; Fellmuth, Bernd; Hermier, Yves; Hill, Kenneth D.; Seog Kim, Jin; Lipinski, Leszek; Nagao, Keisuke; Nakano, Tohru; Peruzzi, Andrea; Sparasci, Fernando; Szmyrka-Grzebyk, Anna; Tamura, Osamu; Tew, Weston L.; Valkiers, Staf; van Geel, Jan

    2015-02-01

    The neon triple point is one of the defining fixed points of the International Temperature Scale of 1990 (ITS-90). Although recognizing that natural neon is a mixture of isotopes, the ITS-90 definition only states that the neon should be of ‘natural isotopic composition’, without any further requirements. A preliminary study in 2005 indicated that most of the observed variability in the realized neon triple point temperatures within a range of about 0.5 mK can be attributed to the variability in isotopic composition among different samples of ‘natural’ neon. Based on the results of an International Project (EUROMET Project No. 770), the Consultative Committee for Thermometry decided to improve the realization of the neon fixed point by assigning the ITS-90 temperature value 24.5561 K to neon with the isotopic composition recommended by IUPAC, accompanied by a quadratic equation to take the deviations from the reference composition into account. In this paper, the uncertainties of the equation are discussed and an uncertainty budget is presented. The resulting standard uncertainty due to the isotopic effect (k = 1) after correction of the calibration data is reduced to (4 to 40) μK when using neon of ‘natural’ isotopic composition or to 30 μK when using 20Ne. For comparison, an uncertainty component of 0.15 mK should be included in the uncertainty budget for the neon triple point if the isotopic composition is unknown, i.e. whenever the correction cannot be applied.

  9. A study of the path-integral quantization of Abelian gauge theories when no explicit gauge-fixing term is included in the bilinear part of the gauge-field action

    International Nuclear Information System (INIS)

    Phillips, S.

    1985-01-01

    The mathematical problem of inverting the operator Δ x μν ≡ g μν g αβ δ x α δ x β -δ x μ δ x ν , as it arises in the path-integral quantization of an Abelian gauge theory, such as quantum electrodynamics, when no gauge-fixing Lagrangian field density is included, is studied in this article. Making use of the fact that the Schwinger source functions, which are introduced for the purpose of generating Green's functions, are free of divergence, a result that follows from the conversion of the exponentiated action into a Gaussian form, the apparently noninvertible partial differential equation, Δ x μν L ν (x) J μ (x), can, by the addition and subsequent subtraction of terms containing the divergence of the source function, be cast into a form that does possess a Green's function solution. The gauge-field propagator is the same as that obtained by the conventional technique, which involves gauge fixing when the gauge parameter, α, is set equal to one. Such an analysis suggests also that, provided the effect of fictitious particles that propagate only in closed loops are included for the study of Green's functions in non-Abelian gauge theories in Landau-type gauges, then, in quantizing either Abelian gauge theories or non-Abelian gauge theories in this generic kind of gauge, it is not necessary to add an explicit gauge-fixing term to the bilinear part of the gauge-field action

  10. Cocaine tolerance: acute versus chronic effects as dependent upon fixed-ratio size.

    OpenAIRE

    Hoffman, S H; Branch, M N; Sizemore, G M

    1987-01-01

    The effects of cocaine on operant behavior were studied by examining fixed-ratio value as a factor in the development of tolerance. Pigeons pecked a response key under a three-component multiple schedule, with each bird being exposed to fixed-ratio values that were categorized as small, medium, or large. Administered acutely, cocaine (1.0 to 10.0 mg/kg) produced dose-related decreases in overall rate of responding. Responding maintained by the largest ratio was decreased by lower doses than t...

  11. Social interactions and college enrollment: A combined school fixed effects/instrumental variables approach.

    Science.gov (United States)

    Fletcher, Jason M

    2015-07-01

    This paper provides some of the first evidence of peer effects in college enrollment decisions. There are several empirical challenges in assessing the influences of peers in this context, including the endogeneity of high school, shared group-level unobservables, and identifying policy-relevant parameters of social interactions models. This paper addresses these issues by using an instrumental variables/fixed effects approach that compares students in the same school but different grade-levels who are thus exposed to different sets of classmates. In particular, plausibly exogenous variation in peers' parents' college expectations are used as an instrument for peers' college choices. Preferred specifications indicate that increasing a student's exposure to college-going peers by ten percentage points is predicted to raise the student's probability of enrolling in college by 4 percentage points. This effect is roughly half the magnitude of growing up in a household with married parents (vs. an unmarried household). Copyright © 2015 Elsevier Inc. All rights reserved.

  12. Analysis of interactive fixed effects dynamic linear panel regression with measurement error

    OpenAIRE

    Nayoung Lee; Hyungsik Roger Moon; Martin Weidner

    2011-01-01

    This paper studies a simple dynamic panel linear regression model with interactive fixed effects in which the variable of interest is measured with error. To estimate the dynamic coefficient, we consider the least-squares minimum distance (LS-MD) estimation method.

  13. Robust estimation and moment selection in dynamic fixed-effects panel data models

    NARCIS (Netherlands)

    Cizek, Pavel; Aquaro, Michele

    Considering linear dynamic panel data models with fixed effects, existing outlier–robust estimators based on the median ratio of two consecutive pairs of first-differenced data are extended to higher-order differencing. The estimation procedure is thus based on many pairwise differences and their

  14. Robust Estimation and Moment Selection in Dynamic Fixed-effects Panel Data Models

    NARCIS (Netherlands)

    Cizek, P.; Aquaro, M.

    2015-01-01

    This paper extends an existing outlier-robust estimator of linear dynamic panel data models with fixed effects, which is based on the median ratio of two consecutive pairs of first-differenced data. To improve its precision and robust properties, a general procedure based on many pairwise

  15. The Importance of Worker, Firm and Match Fixed Effects in the Formation of Wages

    DEFF Research Database (Denmark)

    Sørensen, Torben; Vejlin, Rune Majlund

    This paper estimates a Mincerian wage equation with worker, firm, and match specific fixed effects and thereby complements the growing empirical literature started by the seminal paper of Abowd, Kramarz and Margolis (1999). The analysis takes advantage of the extensive Danish IDA data, which...

  16. Estimation of stochastic frontier models with fixed-effects through Monte Carlo Maximum Likelihood

    NARCIS (Netherlands)

    Emvalomatis, G.; Stefanou, S.E.; Oude Lansink, A.G.J.M.

    2011-01-01

    Estimation of nonlinear fixed-effects models is plagued by the incidental parameters problem. This paper proposes a procedure for choosing appropriate densities for integrating the incidental parameters from the likelihood function in a general context. The densities are based on priors that are

  17. The Fixed-Effects Zero-Inflated Poisson Model with an Application to Health Care Utilization

    NARCIS (Netherlands)

    Majo, M.C.; van Soest, A.H.O.

    2011-01-01

    Response variables that are scored as counts and that present a large number of zeros often arise in quantitative health care analysis. We define a zero-in flated Poisson model with fixed-effects in both of its equations to identify respondent and health-related characteristics associated with

  18. Estimation of Fractionally Integrated Panels with Fixed Effects and Cross-Section Dependence

    DEFF Research Database (Denmark)

    Ergemen, Yunus Emre; Velasco, Carlos

    We consider large N, T panel data models with fixed effects, common factors allowing cross-section dependence, and persistent data and shocks, which are assumed fractionally integrated. In a basic setup, the main interest is on the fractional parameter of the idiosyncratic component, which...

  19. Microfluidic System Simulation Including the Electro-Viscous Effect

    Science.gov (United States)

    Rojas, Eileen; Chen, C. P.; Majumdar, Alok

    2007-01-01

    This paper describes a practical approach using a general purpose lumped-parameter computer program, GFSSP (Generalized Fluid System Simulation Program) for calculating flow distribution in a network of micro-channels including electro-viscous effects due to the existence of electrical double layer (EDL). In this study, an empirical formulation for calculating an effective viscosity of ionic solutions based on dimensional analysis is described to account for surface charge and bulk fluid conductivity, which give rise to electro-viscous effect in microfluidics network. Two dimensional slit micro flow data was used to determine the model coefficients. Geometry effect is then included through a Poiseuille number correlation in GFSSP. The bi-power model was used to calculate flow distribution of isotropically etched straight channel and T-junction microflows involving ionic solutions. Performance of the proposed model is assessed against experimental test data.

  20. LTRACK: Beam-transport calculation including wakefield effects

    International Nuclear Information System (INIS)

    Chan, K.C.D.; Cooper, R.K.

    1988-01-01

    LTRACK is a first-order beam-transport code that includes wakefield effects up to quadrupole modes. This paper will introduce the readers to this computer code by describing the history, the method of calculations, and a brief summary of the input/output information. Future plans for the code will also be described

  1. The Effects of Buildability Factors on Rebar Fixing Labour Productivity of Beamless Slabs

    Directory of Open Access Journals (Sweden)

    Abdulaziz M Jarkas

    2010-07-01

    Full Text Available  Buildability is an important factor affecting labour productivity. Nevertheless, a thorough search of the literature revealed a dearth of research into its effects on in situ reinforced concrete construction, especially at the activity levels. Since rebar fixing is an integral trade of this type of construction material, and beamless slabs are amongst the major encountered activities on construction sites, the objective of this research is to explore the buildability factors affecting its rebar fixing efficiency. To achieve this objective, a large volume of fixing productivity data was collected and analysed using the categorical interaction - regression method. As a result, the main and interaction effects of rebar diameter; reinforcement quantity; slab geometry; and reinforcement layer location are determined. The findings show a significant influence of these factors on the fixing operation, which can be used to provide designers and construction managers with feedback on how well the design of this activity considers the requirements of buildability, and the tangible consequences of designers‟ decisions on labour productivity

  2. The Effects of Buildability Factors on Rebar Fixing Labour Productivity of Beamless Slabs

    Directory of Open Access Journals (Sweden)

    Abdulaziz M Jarkas

    2010-06-01

    Full Text Available Buildability is an important factor affecting labour productivity. Nevertheless, a thorough search of the literature revealed a dearth of research into its effects on in situ reinforced concrete construction, especially at the activity levels. Since rebar fixing is an integral trade of this type of construction material, and beamless slabs are amongst the major encountered activities on construction sites, the objective of this research is to explore the buildability factors affecting its rebar fixing efficiency. To achieve this objective, a large volume of fixing productivity data was collected and analysed using the categorical interaction - regression method. As a result, the main and interaction effects of rebar diameter; reinforcement quantity; slab geometry; and reinforcement layer location are determined. The findings show a significant influence of these factors on the fixing operation, which can be used to provide designers and construction managers with feedback on how well the design of this activity considers the requirements of buildability, and the tangible consequences of designers‟ decisions on labour productivity

  3. The Effects of Buildability Factors on Rebar Fixing Labour Productivity of Beamless Slabs

    Directory of Open Access Journals (Sweden)

    Abdulaziz M Jarkas

    2010-06-01

    Full Text Available  Buildability is an important factor affecting labour productivity. Nevertheless, a thorough search of the literature revealed a dearth of research into its effects on in situ reinforced concrete construction, especially at the activity levels. Since rebar fixing is an integral trade of this type of construction material, and beamless slabs are amongst the major encountered activities on construction sites, the objective of this research is to explore the buildability factors affecting its rebar fixing efficiency. To achieve this objective, a large volume of fixing productivity data was collected and analysed using the categorical interaction - regression method. As a result, the main and interaction effects of rebar diameter; reinforcement quantity; slab geometry; and reinforcement layer location are determined. The findings show a significant influence of these factors on the fixing operation, which can be used to provide designers and construction managers with feedback on how well the design of this activity considers the requirements of buildability, and the tangible consequences of designers‟ decisions on labour productivity

  4. Theory and measurements of electrophoretic effects in monolith, fixed-bed, and fluidized-bed plasma reactors

    International Nuclear Information System (INIS)

    Morin, T.J.

    1989-01-01

    Pressure gradients and secondary flow fields generated by the passage of electrical current in a d.c. gas discharge or gas laser are topics of longstanding interest in the gaseous electronics literature. These hydrodynamic effects of space charge fields and charged particle density gradients have been principally exploited in the development of gas separation and purification processes. In recent characterization studies of fixed-bed and fluidized-bed plasma reactors several anomalous flow features have been observed. These reactors involve the contacting of a high-frequency, resonantly-sustained, disperse gas discharge with granular solids in a fixed or fluidized bed. Anomalies in the measured pressure drops and fluidization velocities have motivated the development of an appropriate theoretical approach to, and some additional experimental investigations of electrophoretic effects in disperse gas discharges. In this paper, a theory which includes the effects of space charge and diffusion is used to estimate the electric field and charged particle density profiles. These profiles are then used to calculate velocity fields and gas flow rates for monolith, fixed-bed, and fluidized-bed reactors. These results are used to rationalize measurements of gas flow rates and axial pressure gradients in high-frequency disperse gas discharges with and without an additional d.c. axial electric field

  5. Associations among job demands and resources, work engagement, and psychological distress: fixed-effects model analysis in Japan.

    Science.gov (United States)

    Oshio, Takashi; Inoue, Akiomi; Tsutsumi, Akizumi

    2018-05-25

    We examined the associations among job demands and resources, work engagement, and psychological distress, adjusted for time-invariant individual attributes. We used data from a Japanese occupational cohort survey, which included 18,702 observations of 7,843 individuals. We investigated how work engagement, measured by the Utrecht Work Engagement Scale, was associated with key aspects of job demands and resources, using fixed-effects regression models. We further estimated the fixed-effects models to assess how work engagement moderated the association between each job characteristic and psychological distress as measured by Kessler 6 scores. The fixed-effects models showed that work engagement was positively associated with job resources, as did pooled cross-sectional and prospective cohort models. Specifically, the standardized regression coefficients (β) were 0.148 and 0.120 for extrinsic reward and decision latitude, respectively, compared to -0.159 and 0.020 for role ambiguity and workload and time pressure, respectively (p job demands and resources, which is in line with the theoretical prediction of the job demands-resources model, even after controlling for time-invariant individual attributes. Work engagement moderated the association between selected aspects of job demands and resources and psychological distress.

  6. Does work-to-family conflict really matter for health? Cross-sectional, prospective cohort and fixed-effects analyses.

    Science.gov (United States)

    Oshio, Takashi; Inoue, Akiomi; Tsutsumi, Akizumi

    2017-02-01

    It is well known that work-to-family conflict (WFC) is negatively associated with employees' health outcomes, including mental health and health behavior. However, the associations may be overstated because of insufficient control for unobserved individual attributes. To address this possibility, we compared the associations between WFC and health observed from a cross-sectional, prospective cohort and from fixed-effects regression models. We analyzed data from a Japanese occupational cohort survey of 15,102 observations from 7551 individuals (5947 men and 1604 women), which were collected in two waves with a one-year interval. We constructed a binary variable of high WFC and considered psychological distress measured using the Kessler 6 (K6) score, job and life dissatisfaction, and five types of health behavior (current smoking, problem drinking, leisure-time physical inactivity, sickness absence, and refraining from medical care). Results showed that for men, a high WFC increased the probability of reporting psychological distress (K6 score ≥ 5); this increased by 12.4% in a fixed-effects model. The association was substantially limited, as compared to the increase of 30.9% and 23.2% observed in cross-sectional and prospective cohort models, respectively; however, the association remained significant. Similar patterns were observed for job and life dissatisfaction. In contrast, the associations of WFC with all five types of health behavior were non-significant after controlling for fixed effects. We obtained generally similar results for women and found no substantial gender difference in the fixed-effects models. We concluded that the associations of WFC with employees' mental health and subjective well-being were robust, whereas the association between WFC and health behavior was generally limited. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Double-photoionization of helium including quadrupole radiation effects

    Energy Technology Data Exchange (ETDEWEB)

    Colgan, James [Los Alamos National Laboratory; Ludlow, J A [AUBURN UNIV; Lee, Teck - Ghee [AUBURN UNIV; Pindzola, M S [AUBURN UNIV; Robicheaux, F [AUBURN UNIV

    2009-01-01

    Non-perturbative time-dependent close-coupling calculations are carried out for the double photoionization of helium including both dipole and quadrupole radiation effects. At a photon energy of 800 eV, accessible at CUlTent synchrotron light sources, the quadrupole interaction contributes around 6% to the total integral double photoionization cross section. The pure quadrupole single energy differential cross section shows a local maxima at equal energy sharing, as opposed to the minimum found in the pure dipole single energy differential cross section. The sum of the pure dipole and pure quadrupole single energy differentials is insensitive to non-dipole effects at 800 eV. However, the triple differential cross section at equal energy sharing of the two ejected electrons shows strong non-dipole effects due to the quadrupole interaction that may be experimentally observable.

  8. Fixed and mobile-bearing total ankle prostheses: Effect on tibial bone strain.

    Science.gov (United States)

    Terrier, Alexandre; Fernandes, Caroline Sieger; Guillemin, Maïka; Crevoisier, Xavier

    2017-10-01

    Total ankle replacement is associated to a high revision rate. To improve implant survival, the potential advantage of prostheses with fixed bearing compared to mobile bearing is unclear. The objective of this study was to test the hypothesis that fixed and mobile bearing prostheses are associated with different biomechanical quantities typically associated to implant failure. With a validated finite element model, we compared three cases: a prosthesis with a fixed bearing, a prosthesis with a mobile bearing in a centered position, and a prosthesis with mobile bearing in an eccentric position. Both prostheses were obtained from the same manufacturer. They were tested on seven tibias with maximum axial compression force during walking. We tested the hypothesis that there was a difference of bone strain, bone-implant interfacial stress, and bone support between the three cases. We also evaluated, for the three cases, the correlations between bone support, bone strain and bone-implant interfacial stress. There were no statistically significant differences between the three cases. Overall, bone support was mainly trabecular, and less effective in the posterior side. Bone strain and bone-implant interfacial stress were strongly correlated to bone support. Even if slight differences are observed between fixed and mobile bearing, it is not enough to put forward the superiority of one of these implants regarding their reaction to axial compression. When associated to the published clinical results, our study provides no argument to warn surgeons against the use of two-components fixed bearing implants. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Does grandchild care influence grandparents' self-rated health? Evidence from a fixed effects approach.

    Science.gov (United States)

    Ates, Merih

    2017-10-01

    The present study aims to identify, whether and how supplementary grandchild care is causally related to grandparents' self-rated health (SRH). Based on longitudinal data drawn from the German Aging Survey (DEAS; 2008-2014), I compare the results of pooled OLS, pooled OLS with lagged dependant variables (POLS-LD), random and fixed effects (RE, FE) panel regression. The results show that there is a positive but small association between supplementary grandchild care and SRH in POLS, POLS-LD, and RE models. However, the fixed effects model shows that the intrapersonal change in grandchild care does not cause a change in grandparents' SRH. The FE findings indicate that supplementary grandchild care in Germany does not have a causal impact on grandparents' SRH, suggesting that models with between-variation components overestimate the influence of grandchild care on grandparents' health because they do not control for unobserved (time-constant) heterogeneity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Consistency in Estimation and Model Selection of Dynamic Panel Data Models with Fixed Effects

    Directory of Open Access Journals (Sweden)

    Guangjie Li

    2015-07-01

    Full Text Available We examine the relationship between consistent parameter estimation and model selection for autoregressive panel data models with fixed effects. We find that the transformation of fixed effects proposed by Lancaster (2002 does not necessarily lead to consistent estimation of common parameters when some true exogenous regressors are excluded. We propose a data dependent way to specify the prior of the autoregressive coefficient and argue for comparing different model specifications before parameter estimation. Model selection properties of Bayes factors and Bayesian information criterion (BIC are investigated. When model uncertainty is substantial, we recommend the use of Bayesian Model Averaging to obtain point estimators with lower root mean squared errors (RMSE. We also study the implications of different levels of inclusion probabilities by simulations.

  11. Varying Coefficient Panel Data Model in the Presence of Endogenous Selectivity and Fixed Effects

    OpenAIRE

    Malikov, Emir; Kumbhakar, Subal C.; Sun, Yiguo

    2013-01-01

    This paper considers a flexible panel data sample selection model in which (i) the outcome equation is permitted to take a semiparametric, varying coefficient form to capture potential parameter heterogeneity in the relationship of interest, (ii) both the outcome and (parametric) selection equations contain unobserved fixed effects and (iii) selection is generalized to a polychotomous case. We propose a two-stage estimator. Given consistent parameter estimates from the selection equation obta...

  12. Capital adjustment cost and bias in income based dynamic panel models with fixed effects

    OpenAIRE

    Yoseph Yilma Getachew; Keshab Bhattarai; Parantap Basu

    2012-01-01

    The fixed effects (FE) estimator of "conditional convergence" in income based dynamic panel models could be biased downward when capital adjustment cost is present. Such a capital adjustment cost means a rising marginal cost of investment which could slow down the convergence. The standard FE regression fails to take into account of this capital adjustment cost and thus it could overestimate the rate of convergence. Using a Ramsey model with long-run adjustment cost of capital, we characteriz...

  13. The Effects of Buildability Factors on Rebar Fixing Labour Productivity of Beamless Slabs

    OpenAIRE

    Jarkas, Abdulaziz M

    2010-01-01

     Buildability is an important factor affecting labour productivity. Nevertheless, a thorough search of the literature revealed a dearth of research into its effects on in situ reinforced concrete construction, especially at the activity levels. Since rebar fixing is an integral trade of this type of construction material, and beamless slabs are amongst the major encountered activities on construction sites, the objective of this research is to explore the buildability factors affecting i...

  14. The Pro-collusive Effect of Increasing the Repose Period for Price Fixing Agreements

    OpenAIRE

    Jeroen Hinloopen

    2005-01-01

    This discussion paper resulted in the publication The B.E. Journal of Economic Analysis & Policy (2007), 7(1), 1135. Intuitively, extending the period of repose for price fixing agreements enhances the effectiveness of competition policy enforcement. This paper proofs this intuition wrong. As extending the repose period reduces cartel members' defection payoff while it leaves unaltered expected compliance profits, it induces cartels to be more stable internally.

  15. An R2 statistic for fixed effects in the linear mixed model.

    Science.gov (United States)

    Edwards, Lloyd J; Muller, Keith E; Wolfinger, Russell D; Qaqish, Bahjat F; Schabenberger, Oliver

    2008-12-20

    Statisticians most often use the linear mixed model to analyze Gaussian longitudinal data. The value and familiarity of the R(2) statistic in the linear univariate model naturally creates great interest in extending it to the linear mixed model. We define and describe how to compute a model R(2) statistic for the linear mixed model by using only a single model. The proposed R(2) statistic measures multivariate association between the repeated outcomes and the fixed effects in the linear mixed model. The R(2) statistic arises as a 1-1 function of an appropriate F statistic for testing all fixed effects (except typically the intercept) in a full model. The statistic compares the full model with a null model with all fixed effects deleted (except typically the intercept) while retaining exactly the same covariance structure. Furthermore, the R(2) statistic leads immediately to a natural definition of a partial R(2) statistic. A mixed model in which ethnicity gives a very small p-value as a longitudinal predictor of blood pressure (BP) compellingly illustrates the value of the statistic. In sharp contrast to the extreme p-value, a very small R(2) , a measure of statistical and scientific importance, indicates that ethnicity has an almost negligible association with the repeated BP outcomes for the study.

  16. Aerodynamic analysis of the Darrieus rotor including secondary effects

    Science.gov (United States)

    Paraschivoiu, I.; Delclaux, F.; Fraunie, P.; Beguier, C.

    1983-10-01

    An aerodynamic analysis is made of two variants of the two-actuator-disk theory for modeling the Darrieus wind turbine. The double-multiple-streamtube model with constant and variable interference factors, including secondary effects, is examined for a Darrieus rotor. The influence of the secondary effects, namely, the blade geometry and profile type, the rotating tower, and the presence of struts and aerodynamic spoilers, is relatively significant, especially at high tip-speed ratios. Variation of the induced velocity as a function of the azimuthal angle allows a more accurate calculation of the aerodynamic loads on the downwind zone of the rotor with respect to the assumed constant interference factors. The theoretical results were compared with available experimental data for the Magdalen Islands wind turbine and Sandia-type machines (straight-line/circular-arc shape).

  17. Two-dimensional analysis of motion artifacts, including flow effects

    International Nuclear Information System (INIS)

    Litt, A.M.; Brody, A.S.; Spangler, R.A.; Scott, P.D.

    1990-01-01

    The effects of motion on magnetic resonance images have been theoretically analyzed for the case of a point-like object in simple harmonic motion and for other one-dimensional trajectories. The authors of this paper extend this analysis to a generalized two-dimensional magnetization with an arbitrary motion trajectory. The authors provide specific solutions for the clinically relevant cases of the cross-sections of cylindrical objects in the body, such as the aorta, which has a roughly one-dimensional, simple harmonic motion during respiration. By extending the solution to include inhomogeneous magnetizations, the authors present a model which allows the effects of motion artifacts and flow artifacts to be analyzed simultaneously

  18. Numerical optimization of conical flow waveriders including detailed viscous effects

    Science.gov (United States)

    Bowcutt, Kevin G.; Anderson, John D., Jr.; Capriotti, Diego

    1987-01-01

    A family of optimized hypersonic waveriders is generated and studied wherein detailed viscous effects are included within the optimization process itself. This is in contrast to previous optimized waverider work, wherein purely inviscid flow is used to obtain the waverider shapes. For the present waveriders, the undersurface is a streamsurface of an inviscid conical flowfield, the upper surface is a streamsurface of the inviscid flow over a tapered cylinder (calculated by the axisymmetric method of characteristics), and the viscous effects are treated by integral solutions of the boundary layer equations. Transition from laminar to turbulent flow is included within the viscous calculations. The optimization is carried out using a nonlinear simplex method. The resulting family of viscous hypersonic waveriders yields predicted high values of lift/drag, high enough to break the L/D barrier based on experience with other hypersonic configurations. Moreover, the numerical optimization process for the viscous waveriders results in distinctly different shapes compared to previous work with inviscid-designed waveriders. Also, the fine details of the viscous solution, such as how the shear stress is distributed over the surface, and the location of transition, are crucial to the details of the resulting waverider geometry. Finally, the moment coefficient variations and heat transfer distributions associated with the viscous optimized waveriders are studied.

  19. Cephalometric effects of the Jones Jig appliance followed by fixed appliances in Class II malocclusion treatment.

    Science.gov (United States)

    Patel, Mayara Paim; Henriques, José Fernando Castanha; Freitas, Karina Maria Salvatore; Grec, Roberto Henrique da Costa

    2014-01-01

    The aim of this study was to cephalometrically assess the skeletal and dentoalveolar effects of Class II malocclusion treatment performed with the Jones Jig appliance followed by fixed appliances. The sample comprised 25 patients with Class II malocclusion treated with the Jones Jig appliance followed by fixed appliances, at a mean initial age of 12.90 years old. The mean time of the entire orthodontic treatment was 3.89 years. The distalization phase lasted for 0.85 years, after which the fixed appliance was used for 3.04 years. Cephalograms were used at initial (T1), post-distalization (T2) and final phases of treatment (T3). For intragroup comparison of the three phases evaluated, dependent ANOVA and Tukey tests were used. Jones Jig appliance did not interfere in the maxillary and mandibular component and did not change maxillomandibular relationship. Jones Jig appliance promoted distalization of first molars with anchorage loss, mesialization and significant extrusion of first and second premolars, as well as a significant increase in anterior face height at the end of treatment. The majority of adverse effects that occur during intraoral distalization are subsequently corrected during corrective mechanics. Buccal inclination and protrusion of mandibular incisors were identified. By the end of treatment, correction of overjet and overbite was observed. Jones Jig appliance promoted distalization of first molars with anchorage loss represented by significant mesial movement and extrusion of first and second premolars, in addition to a significant increase in anterior face height.

  20. Effects of team-based learning on fixed prosthodontic education in a Japanese School of Dentistry.

    Science.gov (United States)

    Takeuchi, Hisahiro; Omoto, Katsuhiro; Okura, Kazuo; Tajima, Toyoko; Suzuki, Yoshitaka; Hosoki, Maki; Koori, Motoharu; Shigemoto, Shuji; Ueda, Mayu; Nishigawa, Keisuke; Rodis, Omar Marianito Maningo; Matsuka, Yoshizo

    2015-04-01

    The aims of this study were to evaluate the quality of team-based learning (TBL) in prosthodontics education for fourth-year dental students at Tokushima University School of Dentistry and to compare this teaching method with traditional lecture-based delivery. Participants in the study were 36 students (22 males and 14 females) who attended the TBL-style fixed prosthodontics course. Ten 60-minute classes were held. The first three were traditional lecture-style classes and were followed by one class introducing the TBL style. The remaining six classes constituted the TBL-format fixed prosthodontics course. The effectiveness of TBL was evaluated through student questionnaires at the end of each class and the results of the term-end examination. The questionnaire revealed high student approval for TBL-style learning, and active group discussion among students during TBL was a key factor in these ratings. In the results of the term-end examination, there were significantly higher scores on the questions that covered TBL-taught material than those covering traditional lecture-taught topics. The results of this study suggest that TBL-style lecture was more effective than traditional-style lecture for teaching fixed prosthodontics and that TBL was a more efficient mode of delivering dental education than traditional lecture-based teaching.

  1. Thermodynamics of strong coupling superconductors including the effect of anisotropy

    Science.gov (United States)

    Daams, J. M.; Carbotte, J. P.

    1981-05-01

    The thermodynamics of several elemental superconductors is computed from isotropic Eliashberg theory formulated on the imaginary frequency axis. A symmary of the available experimental literature is presented and a comparison with theory is given. The small disagreements that are found are all in the direction expected from anisotropy effects. We calculate the effect of a small amount of model anisotropy on the critical temperature, critical field, and high-temperature specific heat from an exact solution of the anisotropic Eliashberg equations. These are the first such results below the critical temperature; unlike previous analytical work, we include retardation, anisotropy in the mass enhancement, and the effect of the Coulomb repulsion in enhancing anisotropy, all of which are significant. We derive a new formula independent of any model anisotropy for the rate of decrease with impurity lifetime of the critical temperature. Finally we demonstrate how the commonly used formulas of Markowitz and Kadanoff and of Clem may give entirely misleading estimates of the gap anisotropy when used to interpret certain experiments.

  2. Mechanical behaviour of cracked welded structures including mismatch effect

    International Nuclear Information System (INIS)

    Hornet, P.

    2002-01-01

    The most important parameters for predicting more precisely the fracture behaviour of welded structures have been identified. In particular, the plasticity development at the crack tip in the ligament appeared as a major parameter to evaluate the yield load of such a complex structure. In this way defect assessments procedures have been developed or modified to take into account the mismatch effect that is to say the mechanical properties of the different material constituting the weld joint. This paper is a synthesis of the work done in the past at Electricite de France on this topic in regards with other work done in France or around the World. The most important parameters which control the plasticity development at the crack tip and so mainly influence the fracture behaviour of welded structures are underlined: the mismatch ratio (weld to base metal yield strength ratio), the mismatch ratio (weld to base metal yield strength ratio), the ligament size and the weld width. Moreover, commonly used fracture toughness testing procedures developed in case of homogeneous specimens cannot be used in a straight forward manner and so has to be modified to take into account the mismatch effect. Number or defect assessment procedures taking into account the mismatch effect by considering the yield load of the welded structure are shortly described. Then, the 'Equivalent Material Method' developed at EDF which allows a good prediction of the applied J-Integral at the crack tip is more detailed. This procedure includes not only both weld and base metal yield strength, the structure geometry, the crack size and the weld dimension using the yield load of the real structures but also includes the effect of both weld and base metal strain hardening exponents. Some validations of this method are proposed. Finally, the ability of finite element modelling to predict the behaviour of such welded structures is demonstrated by modelling real experiments: crack located in the middle of

  3. Neutrinos from Cosmic Accelerators including Magnetic Field and Flavor Effects

    Directory of Open Access Journals (Sweden)

    Walter Winter

    2012-01-01

    Full Text Available We review the particle physics ingredients affecting the normalization, shape, and flavor composition of astrophysical neutrinos fluxes, such as different production modes, magnetic field effects on the secondaries (muons, pions, and kaons, and flavor mixing, where we focus on pγ interactions. We also discuss the interplay with neutrino propagation and detection, including the possibility to detect flavor and its application in particle physics, and the use of the Glashow resonance to discriminate pγ from pp interactions in the source. We illustrate the implications on fluxes and flavor composition with two different models: (1 the target photon spectrum is dominated by synchrotron emission of coaccelerated electrons and (2 the target photon spectrum follows the observed photon spectrum of gamma-ray bursts. In the latter case, the multimessenger extrapolation from the gamma-ray fluence to the expected neutrino flux is highlighted.

  4. Effect of Perilla frutescens Fixed Oil on Experimental Esophagitis in Albino Wistar Rats

    Directory of Open Access Journals (Sweden)

    Ekta Arya

    2013-01-01

    Full Text Available The present study was undertaken to elucidate the effect of Perilla frutescens fixed oil on experimental esophagitis in albino rats. A group of rats (n=6, treated with control vehicle (0.9% NaCl in double distilled water, 3 mL/kg, i.p. and Perilla frutescens fixed oil (100% (1, 2, and 3 mL/kg, i.p., or pantoprazole (30 mg/kg, i.p., were subjected to pylorus and forestomach ligation. Animals were sacrificed after 6 h and evaluated for the gastric pH, volume of gastric juices, total acidity, esophagitis index and free acidity. Esophageal tissues were further subjected to estimations of TBARS, GSH, catalase, and SOD. Treatment with fixed oil significantly inhibited the gastric secretion, total acidity, and esophagitis index. The oil also helped to restore the altered levels of oxidative stress parameters to normal. The present study also makes evident the in vitro antihistaminic and anticholinergic activity of alpha linolenic acid (ALA (18 : 3, n−3 on isolated rat ileum preparation. The lipoxygenase inhibitory, histamine antagonistic, antisecretory (anticholinergic, and antioxidant activity of the oil was attributed for its efficacy in reflux esophagitis.

  5. Clinical effects of fixed functional Herbst appliance in the treatment of class II/1 malocclusion

    Directory of Open Access Journals (Sweden)

    Nedeljković Nenad

    2009-01-01

    Full Text Available Introduction. Sagittal mandible deficiency is the most common cause of skeletal Class II malocclusion. Treatment objective is to stimulate sagittal mandible growth. Fixed functional Herbst appliance use is beneficial for shortening the time required for treatment and does not depend on patient compliance. Case outline. A 13-year-old girl was referred to the Clinic of Orthodontics, School of Dentistry in Belgrade following previous unsuccessful treatment of her skeletal Class II malocclusion using an activator. The patient's poor cooperation had led to failure of the treatment. Patient was subjected to the Herbst treatment for 6 months followed by fixed appliance for another 8 months. Lateral cephalograms before and after the treatment was performed. The remodelation of condylar and fossal articulation was assessed by superimposition of pre- and post-treatment temporomandibular joint tomograms. The promotion of oral hygiene and fluoride use was performed because orthodontic treatment carries a high caries risk and risk for periodontal disease. Skeletal and dental changes were observed after treatment (correction [Max+Mand]: molar relation 7 mm, overjet 8 mm, skeletal relation 5 mm, molars 2 mm, incisors 3 mm. Combination of Herbst and fixed appliances was effective in the treatment of dental and skeletal irregularities for a short period of time. Conclusion . In the retention period, 14 months after treatment, occlusal stability exists. Follow-up care in oral prevention is based on regular recalls at the dental office and supervision at home by the parents.

  6. Effects of fixed or self-titrated dosages of Sativex on cannabis withdrawal and cravings

    Science.gov (United States)

    Trigo, Jose M.; Lagzdins, Dina; Rehm, Jürgen; Selby, Peter; Gamaleddin, Islam; Fischer, Benedikt; Barnes, Allan J.; Huestis, Marilyn A.; Le Foll, Bernard

    2016-01-01

    Background There is currently no pharmacological treatment approved for cannabis dependence. In this proof of concept study, we assessed the feasibility/effects of fixed and self-titrated dosages of Sativex (1:1, Δ9-tetrahydrocannabinol (THC)/cannabidiol (CBD)) on craving and withdrawal from cannabis among nine community-recruited cannabis-dependent subjects. Methods Participants underwent an 8-week double-blind placebo-controlled trial (an ABACADAE design), with four smoke as usual conditions (SAU) (A) separated by four cannabis abstinence conditions (B–E), with administration of either self-titrated/fixed doses of placebo or Sativex (up to 108 mg THC/100 mg CBD). The order of medication administration during abstinence conditions was randomized and counterbalanced. Withdrawal symptoms and craving were assessed using the Cannabis Withdrawal Scale (CWS), Marijuana Withdrawal Checklist (MWC) and Marijuana Craving Questionnaire (MCQ). Medication use was assessed during the study by means of self-reports, vial weight control, toxicology and metabolite analysis. Cannabis use was assessed by means of self-reports. Results High fixed doses of Sativex were well tolerated and significantly reduced cannabis withdrawal during abstinence, but not craving, as compared to placebo. Self-titrated doses were lower and showed limited efficacy as compared to high fixed doses. Participants reported a significantly lower “high” following Sativex or placebo as compared to SAU conditions. Cannabis/medication use along the study, as per self-reports, suggests compliance with the study conditions. Conclusions The results found in this proof of concept study warrant further systematic exploration of Sativex as a treatment option for cannabis withdrawal and dependence. PMID:26925704

  7. Effects of fixed or self-titrated dosages of Sativex on cannabis withdrawal and cravings.

    Science.gov (United States)

    Trigo, Jose M; Lagzdins, Dina; Rehm, Jürgen; Selby, Peter; Gamaleddin, Islam; Fischer, Benedikt; Barnes, Allan J; Huestis, Marilyn A; Le Foll, Bernard

    2016-04-01

    There is currently no pharmacological treatment approved for cannabis dependence. In this proof of concept study, we assessed the feasibility/effects of fixed and self-titrated dosages of Sativex (1:1, Δ(9)-tetrahydrocannabinol (THC)/cannabidiol (CBD)) on craving and withdrawal from cannabis among nine community-recruited cannabis-dependent subjects. Participants underwent an 8-week double-blind placebo-controlled trial (an ABACADAE design), with four smoke as usual conditions (SAU) (A) separated by four cannabis abstinence conditions (B-E), with administration of either self-titrated/fixed doses of placebo or Sativex (up to 108 mg THC/100 mg CBD). The order of medication administration during abstinence conditions was randomized and counterbalanced. Withdrawal symptoms and craving were assessed using the Cannabis Withdrawal Scale (CWS), Marijuana Withdrawal Checklist (MWC) and Marijuana Craving Questionnaire (MCQ). Medication use was assessed during the study by means of self-reports, vial weight control, toxicology and metabolite analysis. Cannabis use was assessed by means of self-reports. High fixed doses of Sativex were well tolerated and significantly reduced cannabis withdrawal during abstinence, but not craving, as compared to placebo. Self-titrated doses were lower and showed limited efficacy as compared to high fixed doses. Participants reported a significantly lower "high" following Sativex or placebo as compared to SAU conditions. Cannabis/medication use along the study, as per self-reports, suggests compliance with the study conditions. The results found in this proof of concept study warrant further systematic exploration of Sativex as a treatment option for cannabis withdrawal and dependence. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  8. Effects of response-independent stimuli on fixed-interval and fixed-ratio performance of rats: a model for stressful disruption of cyclical eating patterns.

    Science.gov (United States)

    Reed, Phil

    2011-03-01

    Binge eating is often associated with stress-induced disruption of typical eating patterns. Three experiments were performed with the aim of developing a potential model for this effect by investigating the effect of presenting response-independent stimuli on rats' lever-pressing for food reinforcement during both fixed-interval (FI) and fixed-ratio (FR) schedules of reinforcement. In Experiment 1, a response-independent brief tone (500-ms, 105-dB, broadband, noisy signal, ranging up to 16 kHz, with spectral peaks at 3 and 500 Hz) disrupted the performance on an FI 60-s schedule. Responding with the response-independent tone was more vigorous than in the absence of the tone. This effect was replicated in Experiment 2 using a within-subject design, but no such effect was noted when a light was employed as a disrupter. In Experiment 3, a 500-ms tone, but not a light, had a similar effect on rats' performance on FR schedules. This tone-induced effect may represent a release from response-inhibition produced by an aversive event. The implications of these results for modeling binge eating are discussed.

  9. Factors that promote renewable energy production in U.S. states: A fixed effect estimation

    Science.gov (United States)

    Nwokeji, Ekwuniru Chika

    2011-12-01

    The unsustainability of conventional energy sources and its environmental destructions are well-known; the sustainability of renewable energy and its environmental benefits are also well-documented. The United States in common with many other countries is increasingly focused on developing renewable energy. At first, the pursuit of this strategy in U.S. was seen more as a way to reduce dependence on oil importation. With increased awareness of environmental challenges resulting from the consumption and production of conventional energy, an additional strategy for the continued interest in renewable energy development in the United States was as a result of its potential to ameliorate environmental problems. The U.S. government are utilizing policy measures and dedicating funding to encourage the development of renewable energy technologies. Beside government policies, there are contextual factors that also affect renewable energy production. These include, but not limited to population growth, energy demand, economic growth, and public acceptance. Given the pressing need to develop a sustainable energy, this study embarks on an outcome assessment of the nature of relationship of renewable energy policy incentives, and selected contextual factors on renewable energy production in the United States. The policy incentive evaluated in this study is the Renewable Energy Production Incentive program. The contextual factors evaluated in this study are energy consumption, population growth, employment, and poverty. Understanding the contextual factors within which policies are placed is essential to defining the most appropriate policy features. The methodological approach to the study is quantitative, using panel data from 1976 to 2007. The study tested two hypotheses using fixed effect estimation with robust standard error as a statistical model. Statistical analyses reveal several interesting results which lend support that besides policy incentives, contextual factors

  10. [Effectiveness of mental health training including active listening for managers].

    Science.gov (United States)

    Ikegami, Kazunori; Tagawa, Yoshimasa; Mafune, Kosuke; Hiro, Hisanori; Nagata, Shoji

    2008-07-01

    significant increases post-training in "Job demands", "Worksite support by supervisor" and "Worksite support by co-worker", subscales of the BJSQ 12 items version. Particularly, the "Worksite support by supervisor" subscale increased significantly in 8 of the 47 sections in a comparison among sections. In this present study, we investigated the effectiveness of mental health training including Active Listening for managers, and suggest that to train Active Listening and use it at the worksite possibly strengthens "Worksite support by supervisor".

  11. A hydrodynamic model for granular material flows including segregation effects

    Science.gov (United States)

    Gilberg, Dominik; Klar, Axel; Steiner, Konrad

    2017-06-01

    The simulation of granular flows including segregation effects in large industrial processes using particle methods is accurate, but very time-consuming. To overcome the long computation times a macroscopic model is a natural choice. Therefore, we couple a mixture theory based segregation model to a hydrodynamic model of Navier-Stokes-type, describing the flow behavior of the granular material. The granular flow model is a hybrid model derived from kinetic theory and a soil mechanical approach to cover the regime of fast dilute flow, as well as slow dense flow, where the density of the granular material is close to the maximum packing density. Originally, the segregation model has been formulated by Thornton and Gray for idealized avalanches. It is modified and adapted to be in the preferred form for the coupling. In the final coupled model the segregation process depends on the local state of the granular system. On the other hand, the granular system changes as differently mixed regions of the granular material differ i.e. in the packing density. For the modeling process the focus lies on dry granular material flows of two particle types differing only in size but can be easily extended to arbitrary granular mixtures of different particle size and density. To solve the coupled system a finite volume approach is used. To test the model the rotational mixing of small and large particles in a tumbler is simulated.

  12. Amlodipine and valsartan as components of a rational and effective fixed-dose combination

    Directory of Open Access Journals (Sweden)

    Bernard Waeber

    2009-03-01

    Full Text Available Bernard Waeber1, Luis M Ruilope21Division of Clinical Pathophysiology, University Hospital, Faculty of Biology and Medicine, University of Lausanne, Switzerland; 2Hypertension Unit, Hospital 12 de Octubre, Madrid, SpainAbstract: Pharmacological treatment of hypertension is effective in preventing cardiovascular and renal complications. Calcium antagonists and blockers of the renin-angiotensin system are widely used today to initiate antihypertensive therapy but, when given as monotherapy, do not suffice in most patients to normalize blood pressure. Combining the two types of agents considerably increases the antihypertensive efficacy, but not at the expense of a deterioration of tolerability. This is exemplified by the experience accumulated with the recently developed fixed dose combination containing the AT1-receptor blocker valsartan (160 mg and the dihydropyridine amlodipine (5 or 10 mg. In a randomized trial, an 8-week treatment normalized blood pressure (<140/90 mmHg within 8 weeks in a large fraction of hypertensive patients (78.4% and 85.2% using the 5/160 [n = 371] and 10/160 mg [n = 377] dosage, respectively. Like all AT1-receptor blockers valsartan has a placebo-like tolerability. Valsartan prevents to a large extent the occurrence amlodipine-induced peripheral edema. Both amlodipine and valsartan have beneficial effects on cardiovascular morbidity and mortality, as well as protective effects on renal function. The co-administration of these two agents is therefore very attractive, as it enables a rapid and sustained blood pressure control in hypertensive patients. The availability of a fixed-dose combination based on amlodipine and valsartan is expected therefore to facilitate the management of hypertension, to improve long-term adherence with antihypertensive therapy and, ultimately, to have a positive impact on cardiovascular and renal outcomes.Keywords: antihypertensive therapy, fixed-dose combination, calcium antagonists

  13. NONPARAMETRIC FIXED EFFECT PANEL DATA MODELS: RELATIONSHIP BETWEEN AIR POLLUTION AND INCOME FOR TURKEY

    Directory of Open Access Journals (Sweden)

    Rabia Ece OMAY

    2013-06-01

    Full Text Available In this study, relationship between gross domestic product (GDP per capita and sulfur dioxide (SO2 and particulate matter (PM10 per capita is modeled for Turkey. Nonparametric fixed effect panel data analysis is used for the modeling. The panel data covers 12 territories, in first level of Nomenclature of Territorial Units for Statistics (NUTS, for period of 1990-2001. Modeling of the relationship between GDP and SO2 and PM10 for Turkey, the non-parametric models have given good results.

  14. APLIKASI REGRESI DATA PANEL DENGAN PENDEKATAN FIXED EFFECT MODEL (STUDI KASUS: PT PLN GIANYAR

    Directory of Open Access Journals (Sweden)

    NI PUTU ANIK MAS RATNASARI

    2014-01-01

    Full Text Available Panel data regression has three approaches. One of these approaches is Fixed Effect Model (FEM. FEM is common estimated using Least Square Dummy Variable. The use of dummy variable in FEM is based on assumption that slope coefficients are constant but intercept varies over individuals. One of application of FEM is to find out motivation of employees at PT PLN Gianyar for non-outsourcing and outsourcing employees based on existence, relatedness, and growth. This research yields the following two models: with 67% motivation non-outsourcing employees represented by existenceand73% motivation non-outsourcing employees represented by existence and growth.

  15. Magnetic properties of nickel halide hydrates including deuteration effects

    Energy Technology Data Exchange (ETDEWEB)

    DeFotis, G.C., E-mail: gxdefo@wm.edu [Chemistry Department, College of William & Mary, Williamsburg, VA, 23187 United States (United States); Van Dongen, M.J.; Hampton, A.S.; Komatsu, C.H.; Trowell, K.T.; Havas, K.C.; Davis, C.M.; DeSanto, C.L. [Chemistry Department, College of William & Mary, Williamsburg, VA, 23187 United States (United States); Hays, K.; Wagner, M.J. [Chemistry Department, George Washington University, Washington, DC, 20052 United States (United States)

    2017-01-01

    Magnetic measurements on variously hydrated nickel chlorides and bromides, including deuterated forms, are reported. Results include locations and sizes of susceptibility maxima, T{sub max} and χ{sub max}, ordering temperatures T{sub c}, Curie constants and Weiss theta in the paramagnetic regime, and primary and secondary exchange interactions from analysis of low temperature data. For the latter a 2D Heisenberg model augmented by interlayer exchange in a mean-field approximation is applied. Magnetization data to 16 kG as a function of temperature show curvature and hysteresis characteristics quite system dependent. For four materials high field magnetization data to 70 kG at 2.00 K are also obtained. Comparison is made with theoretical relations for spin-1 models. Trends are apparent, primarily that T{sub max} of each bromide hydrate is less than for the corresponding chloride, and that for a given halide nD{sub 2}O (n=1 or 2) deuterates exhibit lesser T{sub max} than do nH{sub 2}O hydrates. A monoclinic unit cell determined from powder X-ray diffraction data on NiBr{sub 2}·2D{sub 2}O is different from and slightly larger than that of NiBr{sub 2}·2H{sub 2}O. This provides some rationale for the difference in magnetic properties between these. - Highlights: • The magnetism of Ni(II) chloride and bromide dihydrates and monohydrates is studied. • Effects of replacing H{sub 2}O by D{sub 2}O are examined for both hydration states and both halides. • Exchange interactions in bromides are weaker than in corresponding chlorides. • Exchange interactions are weaker in D{sub 2}O than in corresponding H{sub 2}O containing systems. • The unit cell of NiBr{sub 2}·2D{sub 2}O is different from and slightly larger than that of NiBr{sub 2}·2H{sub 2}O.

  16. Beneficial effects of aluminum enrichment on nitrogen-fixing cyanobacteria in the South China Sea.

    Science.gov (United States)

    Liu, Jiaxing; Zhou, Linbin; Ke, Zhixin; Li, Gang; Shi, Rongjun; Tan, Yehui

    2018-04-01

    Few studies focus on the effects of aluminum (Al) on marine nitrogen-fixing cyanobacteria, which play important roles in the ocean nitrogen cycling. To examine the effects of Al on the nitrogen-fixing cyanobacteria, bioassay experiments in the oligotrophic South China Sea (SCS) and culture of Crocosphaera watsonii in the laboratory were conducted. Field data showed that 200 nM Al stimulated the growth and the nitrogenase gene expression of Trichodesmium and unicellular diazotrophic cyanobacterium group A, and the nitrogen fixation rates of the whole community. Laboratory experiments demonstrated that Al stimulated the growth and nitrogen fixation of C. watsonii under phosphorus limited conditions. Both field and laboratory results indicated that Al could stimulate the growth of diazotrophs and nitrogen fixation in oligotrophic oceans such as the SCS, which is likely related to the utilization of phosphorus, implying that Al plays an important role in the ocean nitrogen and carbon cycles by influencing nitrogen fixation. Copyright © 2018 Elsevier Ltd. All rights reserved.

  17. Income inequality and cardiovascular disease risk factors in a highly unequal country: a fixed-effects analysis from South Africa.

    Science.gov (United States)

    Adjaye-Gbewonyo, Kafui; Kawachi, Ichiro; Subramanian, S V; Avendano, Mauricio

    2018-03-06

    Chronic stress associated with high income inequality has been hypothesized to increase CVD risk and other adverse health outcomes. However, most evidence comes from high-income countries, and there is limited evidence on the link between income inequality and biomarkers of chronic stress and risk for CVD. This study examines how changes in income inequality over recent years relate to changes in CVD risk factors in South Africa, home to some of the highest levels of income inequality globally. We linked longitudinal data from 9356 individuals interviewed in the 2008 and 2012 National Income Dynamics Study to district-level Gini coefficients estimated from census and survey data. We investigated whether subnational district income inequality was associated with several modifiable risk factors for cardiovascular disease (CVD) in South Africa, including body mass index (BMI), waist circumference, blood pressure, physical inactivity, smoking, and high alcohol consumption. We ran individual fixed-effects models to examine the association between changes in income inequality and changes in CVD risk factors over time. Linear models were used for continuous metabolic outcomes while conditional Poisson models were used to estimate risk ratios for dichotomous behavioral outcomes. Both income inequality and prevalence of most CVD risk factors increased over the period of study. In longitudinal fixed-effects models, changes in district Gini coefficients were not significantly associated with changes in CVD risk factors. Our findings do not support the hypothesis that subnational district income inequality is associated with CVD risk factors within the high-inequality setting of South Africa.

  18. Relativistic many-body XMCD theory including core degenerate effects

    Science.gov (United States)

    Fujikawa, Takashi

    2009-11-01

    A many-body relativistic theory to analyze X-ray Magnetic Circular Dichroism (XMCD) spectra has been developed on the basis of relativistic quantum electrodynamic (QED) Keldysh Green's function approach. This theoretical framework enables us to handle relativistic many-body effects in terms of correlated nonrelativistic Green's function and relativistic correction operator Q, which naturally incorporates radiation field screening and other optical field effects in addition to electron-electron interactions. The former can describe the intensity ratio of L2/L3 which deviates from the statistical weight (branching ratio) 1/2. In addition to these effects, we consider the degenerate or nearly degenerate effects of core levels from which photoelectrons are excited. In XPS spectra, for example in Rh 3d sub level excitations, their peak shapes are quite different: This interesting behavior is explained by core-hole moving after the core excitation. We discuss similar problems in X-ray absorption spectra in particular excitation from deep 2p sub levels which are degenerate in each sub levels and nearly degenerate to each other in light elements: The hole left behind is not frozen there. We derive practical multiple scattering formulas which incorporate all those effects.

  19. The complex effects of ocean acidification on the prominent N2-fixing cyanobacterium Trichodesmium.

    Science.gov (United States)

    Hong, Haizheng; Shen, Rong; Zhang, Futing; Wen, Zuozhu; Chang, Siwei; Lin, Wenfang; Kranz, Sven A; Luo, Ya-Wei; Kao, Shuh-Ji; Morel, François M M; Shi, Dalin

    2017-05-05

    Acidification of seawater caused by anthropogenic carbon dioxide (CO 2 ) is anticipated to influence the growth of dinitrogen (N 2 )-fixing phytoplankton, which contribute a large fraction of primary production in the tropical and subtropical ocean. We found that growth and N 2 -fixation of the ubiquitous cyanobacterium Trichodesmium decreased under acidified conditions, notwithstanding a beneficial effect of high CO 2 Acidification resulted in low cytosolic pH and reduced N 2 -fixation rates despite elevated nitrogenase concentrations. Low cytosolic pH required increased proton pumping across the thylakoid membrane and elevated adenosine triphosphate production. These requirements were not satisfied under field or experimental iron-limiting conditions, which greatly amplified the negative effect of acidification. Copyright © 2017, American Association for the Advancement of Science.

  20. Explosive instabilities of reaction-diffusion equations including pinch effects

    International Nuclear Information System (INIS)

    Wilhelmsson, H.

    1992-01-01

    Particular solutions of reaction-diffusion equations for temperature are obtained for explosively unstable situations. As a result of the interplay between inertial, diffusion, pinch and source processes certain 'bell-shaped' distributions may grow explosively in time with preserved shape of the spatial distribution. The effect of the pinch, which requires a density inhomogeneity, is found to diminish the effect of diffusion, or inversely to support the inertial and source processes in creating the explosion. The results may be described in terms of elliptic integrals or. more simply, by means of expansions in the spatial coordinate. An application is the temperature evolution of a burning fusion plasma. (au) (18 refs.)

  1. Is young fatherhood causally related to midlife mortality? A sibling fixed-effect study in Finland.

    Science.gov (United States)

    Einiö, Elina; Nisén, Jessica; Martikainen, Pekka

    2015-11-01

    Previous studies have shown that young fatherhood is associated with higher later-life mortality. It is unclear whether the association is credible, in the sense that mortality and young fatherhood appear to be associated because both are determined by family-related environmental, socioeconomic and genetic characteristics. We used a household-based 10% sample drawn from the 1950 Finnish census to estimate all-cause mortality of fathers born during 1940-1950. The fathers were followed from age 45 until death, or the end of age 54. We used a standard Cox model and a sibling fixed-effects Cox model to examine whether the effect of young fatherhood was independent of observed adulthood characteristics and unobserved early-life characteristics shared by brothers. Men who had their first child before the age of 22 or at ages 22-24 had higher mortality as compared with their brothers who had their first child at the median or mean age of 25-26. Men who had their first child later at ages 30-44 had lower mortality than their brothers who had a first child before the age of 25. The pattern of results from a standard model was similar to that obtained from a fixed-effects sibling model. The findings suggest a causal effect of young fatherhood on mortality and highlight the need to support young fathers in their family life to improve health behaviours and health. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  2. Aerodynamic heating of ballistic missile including the effects of gravity

    Indian Academy of Sciences (India)

    Abstract. The aerodynamic heating of a ballistic missile due to only convection is analysed taking into consideration the effects of gravity. The amount of heat transferred to the wetted area and to the nose region has been separately determined, unlike A Miele's treatise without consideration of gravity. The peak heating rates ...

  3. Aerodynamic heating of ballistic missile including the effects of gravity

    Indian Academy of Sciences (India)

    The aerodynamic heating of a ballistic missile due to only convection is analysed taking into consideration the effects of gravity. The amount of heat transferred to the wetted area and to the nose region has been separately determined, unlike A Miele's treatise without consideration of gravity. The peak heating ratesto the ...

  4. Thermally activated dislocation motion including inertial effects in solid solutions

    International Nuclear Information System (INIS)

    Isaac, R.D.

    1977-01-01

    Dislocation motion through an array of obstacles is considered in terms of the potential energy of the dislocation as it moves through the array. The obstacles form a series of potential wells and barriers which can trap the dislocations. The effect of thermal fluctuations and of a viscous drag on the motion of the dislocation is investigated by analogy with Brownian motion in a field of force. The rate of escape of a trapped dislocation is found to depend on the damping coefficient only for a large viscous drag. The probability that a dislocation will be trapped by a well or barrier is found to depend on the damping coefficient for a small viscous drag. This inertial effect determines how far a dislocation will travel after breaking away from an obstacle

  5. Control rod calibration including the rod coupling effect

    International Nuclear Information System (INIS)

    Szilard, R.; Nelson, G.W.

    1984-01-01

    In a reactor containing more than one control rod, which includes all reactors licensed in the United States, there will be a 'coupling' or 'shadowing' of control rod flux at the location of a control rod as a result of the flux depression caused by another control rod. It was decided to investigate this phenomenon further, and eventually to put calibration table data or formulae in a small computer in the control room, so once could insert the positions of the three control rods and receive the excess reactivity without referring to separate tables. For this to be accomplished, a 'three control- rod reactivity function' would be used which would include the flux coupling between the rods. The function is design and measured data was fitted into it to determine the calibration constants. The input data for fitting the trial functions consisted of 254 data points, each consisting of the position of the reg, shim, and transient rods, and the total excess reactivity. (About 200 of these points were 'critical balance points', that is the rod positions for which reactor was critical, and the remainder were determined by positive period measurements.) Although this may be unrealistic from a physical viewpoint, the function derived gave a very accurate recalculation of the input data, and thus would faithfully give the excess reactivity for any possible combination of the locations of the three control rods. The next step, incorporation of the three-rod function into the minicomputer, will be pursued in the summer and fall of 1984

  6. Free vibration of elastically supported thin cylinders including gyroscopic effects

    CSIR Research Space (South Africa)

    Loveday, PW

    1998-10-29

    Full Text Available [ The equations D[R[ 747723 JSV 106:2 "Issue# MS 1560 VIBRATION OF THIN CYLINDERS 442 required for this procedure\\ including the gyroscopic terms\\ are included in Appendix A[ The displacement functions can then be written as follows] W"x# C0 cosh a0xa C1 sinh a0... xa C2 cos g1xa C3 sin g1xa epx:a0C4 cos qxa C5 sin qxa 1 e px:a0C6 cos qxa C7 sin qxa 1 "6a# V"x# A0C0 cosh a0xa A0C1 sinh a0xa A2C2 cos g1xa A2C3 sin g1xa epx:a$"A4C4 A5C5# cos qxa "A4C5 A5C4# sin qxa % e px:a$"A4C6 A5C7# cos...

  7. Climate implications of including albedo effects in terrestrial carbon policy

    Science.gov (United States)

    Jones, A. D.; Collins, W.; Torn, M. S.; Calvin, K. V.

    2012-12-01

    Proposed strategies for managing terrestrial carbon in order to mitigate anthropogenic climate change, such as financial incentives for afforestation, soil carbon sequestration, or biofuel production, largely ignore the direct effects of land use change on climate via biophysical processes that alter surface energy and water budgets. Subsequent influences on temperature, hydrology, and atmospheric circulation at regional and global scales could potentially help or hinder climate stabilization efforts. Because these policies often rely on payments or credits expressed in units of CO2-equivalents, accounting for biophysical effects would require a metric for comparing the strength of biophysical climate perturbation from land use change to that of emitting CO2. One such candidate metric that has been suggested in the literature on land use impacts is radiative forcing, which underlies the global warming potential metric used to compare the climate effects of various greenhouse gases with one another. Expressing land use change in units of radiative forcing is possible because albedo change results in a net top-of-atmosphere radiative flux change. However, this approach has also been critiqued on theoretical grounds because not all climatic changes associated with land use change are principally radiative in nature, e.g. changes in hydrology or the vertical distribution of heat within the atmosphere, and because the spatial scale of land use change forcing differs from that of well-mixed greenhouse gases. To explore the potential magnitude of this discrepancy in the context of plausible scenarios of future land use change, we conduct three simulations with the Community Climate System Model 4 (CCSM4) utilizing a slab ocean model. Each simulation examines the effect of a stepwise change in forcing relative to a pre-industrial control simulation: 1) widespread conversion of forest land to crops resulting in approximately 1 W/m2 global-mean radiative forcing from albedo

  8. Effect of vegetation types on soil arbuscular mycorrhizal fungi and nitrogen-fixing bacterial communities in a karst region.

    Science.gov (United States)

    Liang, Yueming; Pan, Fujing; He, Xunyang; Chen, Xiangbi; Su, Yirong

    2016-09-01

    Arbuscular mycorrhizal (AM) fungi and nitrogen-fixing bacteria play important roles in plant growth and recovery in degraded ecosystems. The desertification in karst regions has become more severe in recent decades. Evaluation of the fungal and bacterial diversity of such regions during vegetation restoration is required for effective protection and restoration in these regions. Therefore, we analyzed relationships among AM fungi and nitrogen-fixing bacteria abundances, plant species diversity, and soil properties in four typical ecosystems of vegetation restoration (tussock (TK), shrub (SB), secondary forest (SF), and primary forest (PF)) in a karst region of southwest China. Abundance of AM fungi and nitrogen-fixing bacteria, plant species diversity, and soil nutrient levels increased from the tussock to the primary forest. The AM fungus, nitrogen-fixing bacterium, and plant community composition differed significantly between vegetation types (p fungi and nitrogen-fixing bacteria, respectively. Available phosphorus, total nitrogen, and soil organic carbon levels and plant richness were positively correlated with the abundance of AM fungi and nitrogen-fixing bacteria (p fungi and nitrogen-fixing bacteria increased from the tussock to the primary forest and highlight the essentiality of these communities for vegetation restoration.

  9. Homogenization of long fiber reinforced composites including fiber bending effects

    DEFF Research Database (Denmark)

    Poulios, Konstantinos; Niordson, Christian Frithiof

    2016-01-01

    This paper presents a homogenization method, which accounts for intrinsic size effects related to the fiber diameter in long fiber reinforced composite materials with two independent constitutive models for the matrix and fiber materials. A new choice of internal kinematic variables allows...... of the reinforcing fibers is captured by higher order strain terms, resulting in an accurate representation of the micro-mechanical behavior of the composite. Numerical examples show that the accuracy of the proposed model is very close to a non-homogenized finite-element model with an explicit discretization...

  10. Modeling Electric Double-Layers Including Chemical Reaction Effects

    DEFF Research Database (Denmark)

    Paz-Garcia, Juan Manuel; Johannesson, Björn; Ottosen, Lisbeth M.

    2014-01-01

    A physicochemical and numerical model for the transient formation of an electric double-layer between an electrolyte and a chemically-active flat surface is presented, based on a finite elements integration of the nonlinear Nernst-Planck-Poisson model including chemical reactions. The model works...... for symmetric and asymmetric multi-species electrolytes and is not limited to a range of surface potentials. Numerical simulations are presented, for the case of a CaCO3 electrolyte solution in contact with a surface with rate-controlled protonation/deprotonation reactions. The surface charge and potential...... are determined by the surface reactions, and therefore they depends on the bulk solution composition and concentration...

  11. Development of realistic concrete models including scaling effects

    International Nuclear Information System (INIS)

    Carpinteri, A.

    1989-09-01

    Progressive cracking in structural elements of concrete is considered. Two simple models are applied, which, even though different, lead to similar predictions for the fracture behaviour. Both Virtual Crack Propagation Model and Cohesive Limit Analysis (Section 2), show a trend towards brittle behaviour and catastrophical events for large structural sizes. A numerical Cohesive Crack Model is proposed (Section 3) to describe strain softening and strain localization in concrete. Such a model is able to predict the size effects of fracture mechanics accurately. Whereas for Mode I, only untieing of the finite element nodes is applied to simulate crack growth, for Mixed Mode a topological variation is required at each step (Section 4). In the case of the four point shear specimen, the load vs. deflection diagrams reveal snap-back instability for large sizes. By increasing the specimen sizes, such instability tends to reproduce the classical LEFM instability. Remarkable size effects are theoretically predicted and experimentally confirmed also for reinforced concrete (Section 5). The brittleness of the flexural members increases by increasing size and/or decreasing steel content. On the basis of these results, the empirical code rules regarding the minimum amount of reinforcement could be considerably revised

  12. Increasing Recycling through Container Deposit : A Fixed Effects analysis of the Swedish increase in Container Deposit September 2010

    OpenAIRE

    Thörnelöf, Ivar

    2016-01-01

    This thesis analyze the impact on recycling from the increase in the deposit on metal cans that took place in Sweden, September 2010. This is done by using a fixed effects model, fixed on municipality, month, and year. Additionally, the thesis investigates the response of different socioeconomic groups to this change by investigating the interaction between deposit and variables for the socioeconomic factors of interest. Interactions for income, education, immigration, environmental awareness...

  13. Shunted Piezoelectric Vibration Damping Analysis Including Centrifugal Loading Effects

    Science.gov (United States)

    Min, James B.; Duffy, Kirsten P.; Provenza, Andrew J.

    2011-01-01

    Excessive vibration of turbomachinery blades causes high cycle fatigue problems which require damping treatments to mitigate vibration levels. One method is the use of piezoelectric materials as passive or active dampers. Based on the technical challenges and requirements learned from previous turbomachinery rotor blades research, an effort has been made to investigate the effectiveness of a shunted piezoelectric for the turbomachinery rotor blades vibration control, specifically for a condition with centrifugal rotation. While ample research has been performed on the use of a piezoelectric material with electric circuits to attempt to control the structural vibration damping, very little study has been done regarding rotational effects. The present study attempts to fill this void. Specifically, the objectives of this study are: (a) to create and analyze finite element models for harmonic forced response vibration analysis coupled with shunted piezoelectric circuits for engine blade operational conditions, (b) to validate the experimental test approaches with numerical results and vice versa, and (c) to establish a numerical modeling capability for vibration control using shunted piezoelectric circuits under rotation. Study has focused on a resonant damping control using shunted piezoelectric patches on plate specimens. Tests and analyses were performed for both non-spinning and spinning conditions. The finite element (FE) shunted piezoelectric circuit damping simulations were performed using the ANSYS Multiphysics code for the resistive and inductive circuit piezoelectric simulations of both conditions. The FE results showed a good correlation with experimental test results. Tests and analyses of shunted piezoelectric damping control, demonstrating with plate specimens, show a great potential to reduce blade vibrations under centrifugal loading.

  14. Analyzing the Sand-fixing Effect of Feldspathic Sandstone from the Texture Characteristics

    Science.gov (United States)

    Zhang, lu; Ban, Jichang

    2018-01-01

    The purpose of this research was aimed to study the sand fixing effect of feldspathic sandstone in Mu Us Sandy Land, to provide a scienticic basis for desertification control, soil and water conservation and development of farming there. Methods of mixing feldspathic sandstone and aeolian sandy soil according to 1: 0, 1: 1, 1: 2, 1: 5, and 0: 1 mass ratioes, the graded composition and characteristics were studied with laser particle size analyzer. The result showed that these features of sand-based, loosely structured, easy to wind erosion of aeolian sandy soil were changed before feldspathic sandstone and aeolian sandy soil compounding. The <0.05 mm particle mass increased with feldspathic sandstone mass increasing. The texture presented this kind of change from sand to sandy loam to loam to silt loam. The small particle size distribution, good homogeneity and other features of aeolian sandy soil were improved to a certain degree, and the particle size distribution became broad before feldspathic sandstone and aeolian sandy soil compounding. The particle grading was continuous, and the grading characteristic was good when m(F): m(S) was 1: 5(Cu was 54.71 and Cc was 2.54) or when m(F): m(S) was 1: 2(Cu was 76.21, Cc was 1.12). The conclusion is that feldspathic sandstone has sand-fixing effect in texture characteristics, which heightens with feldspathic sandstone mass increasing, and when the mass ratio of feldspathic sandstone: aeolian sandy soil is 1: 2 or 1: 5 which compound better.

  15. Implant rehabilitation of the atrophic edentulous maxilla including immediate fixed provisional restoration without the use of bone grafting: a review of 1-year outcome data from a long-term prospective clinical trial.

    Science.gov (United States)

    Toljanic, Joseph A; Baer, Russell A; Ekstrand, Karl; Thor, Andreas

    2009-01-01

    The literature suggests that predictable integration can be achieved when dental implant placement is combined with immediate fixed provisional restoration in a variety of clinical situations. Fewer data are available, however, regarding outcomes for immediate provisional restoration of implants in the edentulous maxilla. This report presents 1-year data acquired from a long-term prospective clinical trial designed to assess outcomes following the immediate provisional fixed restoration of implants in the atrophic edentulous maxilla without the use of bone augmentation. Fifty-one subjects diagnosed with an atrophic edentulous maxilla received a total of 306 implants (six implants per subject) followed by fixed provisional restoration within 24 hours of implant placement. No subjects underwent grafting to enhance bone volume in preparation for implant treatment. Data acquired included bone quantity and quality, implant dimensions, implant locations, and implant placement stability. Subjects returned for 1-year follow-up examinations to assess implant integration and restoration function. Periapical radiographs were obtained and compared to baseline images to assess marginal bone height maintenance. At the 3-month follow-up examination, 294 of 306 implants placed in 51 subjects were found to be integrated. This represents a cumulative implant survival rate of 96%. At the 1-year follow-up examination, mean marginal bone loss of 0.5 mm was noted, with no further loss of implants. These results support the contention that predictable long-term outcomes may be obtained for the atrophic edentulous maxilla when treated with an implant rehabilitation protocol that includes immediate fixed provisional restoration without the use of bone grafting. This strategy offers a promising treatment alternative for the patient with an atrophic edentulous maxilla.

  16. Aeroelastic modal dynamics of wind turbines including anisotropic effects

    Energy Technology Data Exchange (ETDEWEB)

    Fisker Skjoldan, P.

    2011-03-15

    Several methods for aeroelastic modal analysis of a rotating wind turbine are developed and used to analyse the modal dynamics of two simplified models and a complex model in isotropic and anisotropic conditions. The Coleman transformation is used to enable extraction of the modal frequencies, damping, and periodic mode shapes of a rotating wind turbine by describing the rotor degrees of freedom in the inertial frame. This approach is valid only for an isotropic system. Anisotropic systems, e.g., with an unbalanced rotor or operating in wind shear, are treated with the general approaches of Floquet analysis or Hill's method which do not provide a unique reference frame for observing the modal frequency, to which any multiple of the rotor speed can be added. This indeterminacy is resolved by requiring that the periodic mode shape be as constant as possible in the inertial frame. The modal frequency is thus identified as the dominant frequency in the response of a pure excitation of the mode observed in the inertial frame. A modal analysis tool based directly on the complex aeroelastic wind turbine code BHawC is presented. It uses the Coleman approach in isotropic conditions and the computationally efficient implicit Floquet analysis in anisotropic conditions. The tool is validated against system identifications with the partial Floquet method on the nonlinear BHawC model of a 2.3 MW wind turbine. System identification results show that nonlinear effects on the 2.3 MW turbine in most cases are small, but indicate that the controller creates nonlinear damping. In isotropic conditions the periodic mode shape contains up to three harmonic components, but in anisotropic conditions it can contain an infinite number of harmonic components with frequencies that are multiples of the rotor speed. These harmonics appear in calculated frequency responses of the turbine. Extreme wind shear changes the modal damping when the flow is separated due to an interaction between

  17. Microscopic description of production cross sections including deexcitation effects

    Science.gov (United States)

    Sekizawa, Kazuyuki

    2017-07-01

    Background: At the forefront of the nuclear science, production of new neutron-rich isotopes is continuously pursued at accelerator laboratories all over the world. To explore the currently unknown territories in the nuclear chart far away from the stability, reliable theoretical predictions are inevitable. Purpose: To provide a reliable prediction of production cross sections taking into account secondary deexcitation processes, both particle evaporation and fission, a new method called TDHF+GEMINI is proposed, which combines the microscopic time-dependent Hartree-Fock (TDHF) theory with a sophisticated statistical compound-nucleus deexcitation model, GEMINI++. Methods: Low-energy heavy ion reactions are described based on three-dimensional Skyrme-TDHF calculations. Using the particle-number projection method, production probabilities, total angular momenta, and excitation energies of primary reaction products are extracted from the TDHF wave function after collision. Production cross sections for secondary reaction products are evaluated employing GEMINI++. Results are compared with available experimental data and widely used grazing calculations. Results: The method is applied to describe cross sections for multinucleon transfer processes in 40Ca+124Sn (Ec .m .≃128.54 MeV ), 48Ca+124Sn (Ec .m .≃125.44 MeV ), 40Ca+208Pb (Ec .m .≃208.84 MeV ), 58Ni+208Pb (Ec .m .≃256.79 MeV ), 64Ni+238U (Ec .m .≃307.35 MeV ), and 136Xe+198Pt (Ec .m .≃644.98 MeV ) reactions at energies close to the Coulomb barrier. It is shown that the inclusion of secondary deexcitation processes, which are dominated by neutron evaporation in the present systems, substantially improves agreement with the experimental data. The magnitude of the evaporation effects is very similar to the one observed in grazing calculations. TDHF+GEMINI provides better description of the absolute value of the cross sections for channels involving transfer of more than one proton, compared to the grazing

  18. Fixed Points

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 5. Fixed Points - From Russia with Love - A Primer of Fixed Point Theory. A K Vijaykumar. Book Review Volume 5 Issue 5 May 2000 pp 101-102. Fulltext. Click here to view fulltext PDF. Permanent link:

  19. Treatment and posttreatment effects of mandibular cervical headgear followed by fixed appliances in Class III malocclusion.

    Science.gov (United States)

    Rey, Diego; Angel, David; Oberti, Giovanni; Baccetti, Tiziano

    2008-03-01

    In this cephalometric investigation, we compared the treatment and posttreatment effects on patients undergoing an initial phase of mandibular cervical headgear (MCH) therapy followed later by comprehensive edgewise therapy with untreated Class III controls. The treated sample consisted of 21 patients treated consecutively with MCH before the pubertal growth spurt (average age, 10 years 2 months at the beginning of treatment). At the final observation period (average age, 15 years 3 months), all patients were in decelerative growth phases as determined by the cervical vertebral maturation method. Active treatment and posttreatment effects were evaluated in the treated group with nonparametric statistical analysis for paired samples. The treated sample was compared with a nonparametric statistical test for independent samples with 20 untreated Class III subjects who were matched for malocclusion, sex, and stage of cervical vertebral maturation to the treatment group. MCH therapy followed by fixed appliances was shown to be an effective treatment for the correction of skeletal Class III malocclusion at postpubertal observation. The favorable skeletal effects consisted mainly of smaller increases in mandibular length and advancement with respect to the controls, with the final outcome of significant improvements in the sagittal skeletal (+4 mm for the Wits appraisal) and dental (+2.7 mm for overjet, -4.4 mm for molar relationship) parameters. This treatment protocol also induced significant downward rotation of the mandible (2.8 degrees ).

  20. Investigations on effects of the hole size to fix electrodes and interconnection lines in polydimethylsiloxane

    Science.gov (United States)

    Behkami, Saber; Frounchi, Javad; Ghaderi Pakdel, Firouz; Stieglitz, Thomas

    2017-11-01

    Translational research in bioelectronics medicine and neural implants often relies on established material assemblies made of silicone rubber (polydimethylsiloxane-PDMS) and precious metals. Longevity of the compound is of utmost importance for implantable devices in therapeutic and rehabilitation applications. Therefore, secure mechanical fixation can be used in addition to chemical bonding mechanisms to interlock PDMS substrate and insulation layers with metal sheets for interconnection lines and electrodes. One of the best ways to fix metal lines and electrodes in PDMS is to design holes in electrode rims to allow for direct interconnection between top to bottom layer silicone. Hence, the best layouts and sizes of holes (up to 6) which provide sufficient stability against lateral and vertical forces have been investigated with a variety of numbers of hole in line electrodes, which are simulated and fabricated with different layouts, sizes and materials. Best stability was obtained with radii of 100, 72 and 62 µm, respectively, and a single central hole in aluminum, platinum and MP35N foil line electrodes of 400  ×  500 µm2 size and of thickness 20 µm. The study showed that the best hole size which provides line electrode immobility (of thickness less than 30 µm) within a central hole is proportional to reverse value of Young’s Modulus of the material used. Thus, an array of line electrodes was designed and fabricated to study this effect. Experimental results were compared with simulation data. Subsequently, an approximation curve was generated as design rule to propose the best radius to fix line electrodes according to the material thickness between 10 and 200 µm using PDMS as substrate material.

  1. Effect of fixed-dose combinations of ezetimibe plus rosuvastatin in patients with primary hypercholesterolemia: MRS-ROZE (Multicenter Randomized Study of ROsuvastatin and eZEtimibe).

    Science.gov (United States)

    Kim, Kyung-Jin; Kim, Sang-Hyun; Yoon, Young Won; Rha, Seung-Woon; Hong, Soon-Jun; Kwak, Choong-Hwan; Kim, Weon; Nam, Chang-Wook; Rhee, Moo-Yong; Park, Tae-Ho; Hong, Taek-Jong; Park, Sungha; Ahn, Youngkeun; Lee, Namho; Jeon, Hui-Kyung; Jeon, Dong-Woon; Han, Kyoo-Rok; Moon, Keon-Woong; Chae, In-Ho; Kim, Hyo-Soo

    2016-10-01

    We aimed to compare the effects of fixed-dose combinations of ezetimibe plus rosuvastatin to rosuvastatin alone in patients with primary hypercholesterolemia, including a subgroup analysis of patients with diabetes mellitus (DM) or metabolic syndrome (MetS). This multicenter eight-week randomized double-blind phase III study evaluated the safety and efficacy of fixed-dose combinations of ezetimibe 10 mg plus rosuvastatin, compared with rosuvastatin alone in patients with primary hypercholesterolemia. Four hundred and seven patients with primary hypercholesterolemia who required lipid-lowering treatment according to the ATP III guideline were randomized to one of the following six treatments for 8 weeks: fixed-dose combinations with ezetimibe 10 mg daily plus rosuvastatin (5, 10, or 20 mg daily) or rosuvastatin alone (5, 10, or 20 mg daily). Fixed-dose combination of ezetimibe plus rosuvastatin significantly reduced LDL cholesterol, total cholesterol, and triglyceride levels compared with rosuvastatin alone. Depending on the rosuvastatin dose, these fixed-dose combinations of ezetimibe plus rosuvastatin provided LDL cholesterol, total cholesterol, and triglyceride reductions of 56%-63%, 37%-43%, and 19%-24%, respectively. Moreover, the effect of combination treatment on cholesterol levels was more pronounced in patients with DM or MetS than in non-DM or non-MetS patients, respectively, whereas the effect of rosuvastatin alone did not differ between DM vs non-DM or MetS vs non-MetS patients. Fixed-dose combinations of ezetimibe and rosuvastatin provided significantly superior efficacy to rosuvastatin alone in lowering LDL cholesterol, total cholesterol, and triglyceride levels. Moreover, the reduction rate was greater in patients with DM or MetS. © 2016 The Authors Cardiovascular Therapeutics Published by John Wiley & Sons Ltd.

  2. The analysis of cost-effectiveness of implant and conventional fixed dental prosthesis.

    Science.gov (United States)

    Chun, June Sang; Har, Alix; Lim, Hyun-Pil; Lim, Hoi-Jeong

    2016-02-01

    This study conducted an analysis of cost-effectiveness of the implant and conventional fixed dental prosthesis (CFDP) from a single treatment perspective. The Markov model for cost-effectiveness analysis of the implant and CFDP was carried out over maximum 50 years. The probabilistic sensitivity analysis was performed by the 10,000 Monte-Carlo simulations, and cost-effectiveness acceptability curves (CEAC) were also presented. The results from meta-analysis studies were used to determine the survival rates and complication rates of the implant and CFDP. Data regarding the cost of each treatment method were collected from University Dental Hospital and Statistics Korea for 2013. Using the results of the patient satisfaction survey study, quality-adjusted prosthesis year (QAPY) of the implant and CFDP strategy was evaluated with annual discount rate. When only the direct cost was considered, implants were more cost-effective when the willingness to pay (WTP) was more than 10,000 won at 10(th) year after the treatment, and more cost-effective regardless of the WTP from 20(th) year after the prosthodontic treatment. When the indirect cost was added to the direct cost, implants were more cost-effective only when the WTP was more than 75,000 won at the 10(th) year after the prosthodontic treatment, more than 35,000 won at the 20(th) year after prosthodontic treatment. The CFDP was more cost-effective unless the WTP was more than 75,000 won at the 10(th) year after prosthodontic treatment. But the cost-effectivenss tendency changed from CFDP to implant as time passed.

  3. Effects of artificial sand fixing on community characteristics of a rare desert shrub.

    Science.gov (United States)

    Liu, Huiliang; Tao, Ye; Qiu, Dong; Zhang, Daoyuan; Zhang, Yongkuan

    2013-10-01

    Eremosparton songoricum (Fabaceae) is a rare, native, clonal small shrub of the deserts of central Asia. Although human activities have greatly fragmented the distribution of E. songoricum, it occurs in areas where artificial sand fixing (AS) has been implemented. We sought to explore whether AS promotes survival and growth of E. songoricum. In the Gurbantunggut Desert of northwestern China in June 2010, we established 10 plots in an area where sand fixing occurred (5-10 years previously) and 11 plots on original sand substrate on which some plants had settled without fixing sand. Sand fixing changed soil properties and biological characteristics in sand-fixed plots. The soil surface where sand fixing occurred was covered by algal crusts and some lichen, but not bare sand (BS). Soil nutrients; water content of deep soil (30-150 cm); overall plant and herbaceous species richness, diversity, abundance, and cover; above- and belowground biomass; and cover, biomass, and height of E. songoricum in the sand-fixed plots were significantly greater than in plots of BS. However, distribution of E. songoricum individuals in the 2 types of plots did not differ. Our results indicate AS may enhance survival of E. songoricum and increase the overall diversity and stability of the desert plant community. We suggest AS as a way to protect this rare desert plant in situ. © 2013 Society for Conservation Biology.

  4. It takes a village: Fixed-effects analysis of neighborhood collective efficacy and children's development

    Directory of Open Access Journals (Sweden)

    Kayoko Ichikawa

    2017-08-01

    Full Text Available Background: Previous studies suggest that neighborhood social capital is associated with children's mental health. The purpose of this study was to examine the association between neighborhood collective efficacy and children's psychosocial development. Methods: We used data on children and their parents (n = 918 who were part of the Japanese study of Stratification, Health, Income, and Neighborhood (JSHINE from 2010 to 2013 (wave 1 and wave 2. Households were recruited from the Tokyo metropolitan area through clustered random sampling. Changes in children's psychosocial development (assessed using a child behavioral checklist between waves 1 and 2 were regressed on parents' perceptions of changes in neighborhood collective efficacy (social cohesion and informal social control. Results: Change in perception of neighborhood social cohesion was inversely associated with change in child total problems (β = −0.22; 95% confidence interval [CI]: −0.37 to −0.001; effect size d = −0.03. Change in perceptions of neighborhood informal social control was inversely associated with change in children's externalizing problems (β = −0.16; 95% CI: −0.30 to −0.03; d = −0.02. Conclusions: The results of these fixed-effects models suggest that strengthening neighborhood collective efficacy is related to improvements in child psychosocial development.

  5. EFFECT OF NITROGEN-FIXING BACTERIA ON GRAIN YIELD AND DEVELOPMENT OF FLOODED IRRIGATED RICE

    Directory of Open Access Journals (Sweden)

    AMAURI NELSON BEUTLER

    2016-01-01

    Full Text Available This study aimed at evaluating the effect of Azospirillum brasilense , a nitrogen - fixing bacterium, on flooded irrigated rice yield. Evaluations were carried out in a shaded nursery, with seedlings grown on an Alfisol. Were performed two sets of experiments. In the first, were carried out four experiments using the flooded rice cultivars INIA Olimar, Puitá Inta - CL, Br Irga 409 and Irga 424; these trials were set up as completely randomized design in a 5x4 factorial scheme, with four replications. Treatments consisted of five nitrogen rates (0, 40, 80, 120 and 160 kg ha - 1 and four levels of liquid inoculant Ab - V5 and Ab - V6 - A. brasilense (0, 1, 2 and 4 times the manufacturer's recommendation without seed treatment. In second set, were performed two experiments using the cultivars Puitá Inta - CL and Br Irga 409, arranged in the same design, but using a 4x2 factorial. In this set, treatments were composed of four levels of Ab - V5 and Ab - V6 - A. brasilense liquid inoculant (0, 1, 2 and 4 times the recommendation of 100 mL ha - 1 , using rice seeds with and without insecticide and fungicide treatment. Shoot dry matter, number of panicles, and rice grain yield per pot were the assessed variables. The results showed that rice seed inoculation with A. brasilense had no effects on rice grain yield of the cultivars INIA Olimar, Puitá Inta - CL, Br Irga 409 and Irga 424.

  6. Effects of disintegration on anaerobic degradation of sewage excess sludge in downflow stationary fixed film digesters.

    Science.gov (United States)

    Engelhart, M; Krüger, M; Kopp, J; Dichtl, N

    2000-01-01

    The effects of mechanical disintegration on anaerobic digestibility of sewage excess sludge in downflow stationary fixed film (DSFF) digesters were investigated on laboratory scale. Mechanical pretreatment using a high pressure homogenizer led to significantly enhanced concentrations of soluble proteins and carbohydrates in the feed sludge. Using DSFF digesters with two different tubular plastic media as support material it was shown that a stable digestion process could be achieved at hydraulic retention times (HRT) down to 5 days. Compared to conventional digesters at 10 d and 15 d HRT respectively, the degradation of volatile solids was enhanced up to 25%, also resulting in a higher specific biogas production. Further investigations on degradation of soluble proteins and carbohydrates showed that a slowly degradable fraction of carbohydrates was released via disintegration. Using the distribution of chain length and the concentrations of volatile fatty acids as process parameters, the dependability on the HRT and the degree of disintegration (the release of soluble COD) predominated the effects of specific surface area of the support media.

  7. Fix 40!

    Index Scriptorium Estoniae

    2008-01-01

    Ansambel Fix peab 13. detsembril Tallinnas Saku Suurhallis oma 40. sünnipäeva. Kontserdi erikülaline on ansambel Apelsin, kaastegevad Jassi Zahharov ja HaleBopp Singers. Õhtut juhib Tarmo Leinatamm

  8. A Fixed Flow is More Effective than Titrated Flow during Bubble Nasal CPAP for Respiratory Distress in Preterm Neonates.

    Science.gov (United States)

    Murki, Srinivas; Das, Ratan Kumar; Sharma, Deepak; Kumar, Praveen

    2015-01-01

    The clinical effects of a pre-fixed flow of air-oxygen versus a flow titrated according to visible bubbling are not well understood. To compare the effects of a fixed flow (5 L/min) and titrated flow (flow just enough to ensure bubbling) at different set pressures on delivered intra-prong pressure, gas exchange and clinical parameters in preterm infants on bubble CPAP for respiratory distress. Preterm infants rate, set pressure, FiO2, SpO2, Silverman retraction score, respiratory rate, abdominal girth, and blood gases were recorded. The delivered intra-prong pressure was measured by an electronic manometer. 69 recordings were made in 54 infants. For each of the set CPAP pressures (4, 5, and 6 cm H2O), the mean delivered pressure with a fixed flow of 5 L/min was higher than that delivered by the titrated flow. During the fixed flow epoch, the delivered pressure was closer to and higher than the set pressure resulting in higher PaO2 and lower PaCO2 as compared to titrated flow epoch. In the titrated flow period, the delivered pressure was consistently lower than the set pressure. In preterm infants on bubble CPAP with set pressures of 4-6 cm H2O, a fixed flow of 5 L/min is more effective than a flow titrated to ensure adequate visible bubbling. It achieves higher delivered pressures, better oxygenation and ventilation.

  9. Evidence of political yardstick competition in France using a two-regime spatial Durbin model with fixed effects

    NARCIS (Netherlands)

    Elhorst, J. Paul; Freret, Sandy

    2009-01-01

    This research proposes a two-regime spatial Durbin model with spatial and time-period fixed effects to test for political yardstick competition and exclude any other explanation that might produce spatial interaction effects among the dependent variable, the independent variables, or the error term.

  10. Racial Inequality in Education in Brazil: A Twins Fixed-Effects Approach.

    Science.gov (United States)

    Marteleto, Letícia J; Dondero, Molly

    2016-08-01

    Racial disparities in education in Brazil (and elsewhere) are well documented. Because this research typically examines educational variation between individuals in different families, however, it cannot disentangle whether racial differences in education are due to racial discrimination or to structural differences in unobserved neighborhood and family characteristics. To address this common data limitation, we use an innovative within-family twin approach that takes advantage of the large sample of Brazilian adolescent twins classified as different races in the 1982 and 1987-2009 Pesquisa Nacional por Amostra de Domicílios. We first examine the contexts within which adolescent twins in the same family are labeled as different races to determine the characteristics of families crossing racial boundaries. Then, as a way to hold constant shared unobserved and observed neighborhood and family characteristics, we use twins fixed-effects models to assess whether racial disparities in education exist between twins and whether such disparities vary by gender. We find that even under this stringent test of racial inequality, the nonwhite educational disadvantage persists and is especially pronounced for nonwhite adolescent boys.

  11. Biomechanical effects of two different collar implant structures on stress distribution under cantilever fixed partial dentures.

    Science.gov (United States)

    Merıç, Gökçe; Erkmen, Erkan; Kurt, Ahmet; Eser, Atilim; özden, Ahmet Utku

    2011-11-01

    The purpose of the study was to compare the effects of two distinct collar geometries of implants on stress distribution in the bone around the implants supporting cantilever fixed partial dentures (CFPDs) as well as in the implant-abutment complex and superstructures. The three-dimensional finite element method was selected to evaluate the stress distribution. CFPDs which was supported by microthread collar structured (MCS) and non-microthread collar structured (NMCS) implants was modeled; 300 N vertical, 150 N oblique and 60 N horizontal forces were applied to the models separately. The stress values in the bone, implant-abutment complex and superstructures were calculated. In the MCS model, higher stresses were located in the cortical bone and implant-abutment complex in the case of vertical load while decreased stresses in cortical bone and implant-abutment complex were noted within horizontal and oblique loading. In the case of vertical load, decreased stresses have been noted in cancellous bone and framework. Upon horizontal and oblique loading, a MCS model had higher stress in cancellous bone and framework than the NMCS model. Higher von Mises stresses have been noted in veneering material for NMCS models. It has been concluded that stress distribution in implant-supported CFPDs correlated with the macro design of the implant collar and the direction of applied force.

  12. Associations of neighborhood disorganization and maternal spanking with children's aggression: A fixed-effects regression analysis.

    Science.gov (United States)

    Ma, Julie; Grogan-Kaylor, Andrew; Lee, Shawna J

    2018-02-01

    This study employed fixed effects regression that controls for selection bias, omitted variables bias, and all time-invariant aspects of parent and child characteristics to examine the simultaneous associations between neighborhood disorganization, maternal spanking, and aggressive behavior in early childhood using data from the Fragile Families and Child Wellbeing Study (FFCWS). Analysis was based on 2,472 children and their mothers who participated in Wave 3 (2001-2003; child age 3) and Wave 4 (2003-2006; child age 5) of the FFCWS. Results indicated that higher rates of neighborhood crime and violence predicted higher levels of child aggression. Maternal spanking in the past year, whether frequent or infrequent, was also associated with increases in aggressive behavior. This study contributes statistically rigorous evidence that exposure to violence in the neighborhood as well as the family context are predictors of child aggression. We conclude with a discussion for the need for multilevel prevention and intervention approaches that target both community and parenting factors. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

  13. Fixing the stimulus-as-fixed-effect fallacy in task fMRI [version 2; referees: 1 approved, 2 approved with reservations

    Directory of Open Access Journals (Sweden)

    Jacob Westfall

    2017-03-01

    Full Text Available Most functional magnetic resonance imaging (fMRI experiments record the brain’s responses to samples of stimulus materials (e.g., faces or words. Yet the statistical modeling approaches used in fMRI research universally fail to model stimulus variability in a manner that affords population generalization, meaning that researchers’ conclusions technically apply only to the precise stimuli used in each study, and cannot be generalized to new stimuli. A direct consequence of this stimulus-as-fixed-effect fallacy is that the majority of published fMRI studies have likely overstated the strength of the statistical evidence they report. Here we develop a Bayesian mixed model (the random stimulus model; RSM that addresses this problem, and apply it to a range of fMRI datasets. Results demonstrate considerable inflation (50-200% in most of the studied datasets of test statistics obtained from standard “summary statistics”-based approaches relative to the corresponding RSM models. We demonstrate how RSMs can be used to improve parameter estimates, properly control false positive rates, and test novel research hypotheses about stimulus-level variability in human brain responses.

  14. Unemployment and psychosocial outcomes to age 30: A fixed-effects regression analysis.

    Science.gov (United States)

    Fergusson, David M; McLeod, Geraldine F; Horwood, L John

    2014-08-01

    We aimed to examine the associations between exposure to unemployment and psychosocial outcomes over the period from 16 to 30 years, using data from a well-studied birth cohort. Data were collected over the course of the Christchurch Health and Development Study, a longitudinal study of a birth cohort of 1265 children, born in Christchurch in 1977, who have been studied to age 30. Assessments of unemployment and psychosocial outcomes (mental health, substance abuse/dependence, criminal offending, adverse life events and life satisfaction) were obtained at ages 18, 21, 25 and 30. Prior to adjustment, an increasing duration of unemployment was associated with significant increases in the risk of all psychosocial outcomes. These associations were adjusted for confounding using conditional, fixed-effects regression techniques. The analyses showed significant (p unemployment and major depression (p = 0.05), alcohol abuse/dependence (p = 0.043), illicit substance abuse/dependence (p = 0.017), property/violent offending (p unemployment. The findings suggested that the association between unemployment and psychosocial outcomes was likely to involve a causal process in which unemployment led to increased risks of adverse psychosocial outcomes. Effect sizes were estimated using attributable risk; exposure to unemployment accounted for between 4.2 and 14.0% (median 10.8%) of the risk of experiencing the significant psychosocial outcomes. The findings of this study suggest that exposure to unemployment had small but pervasive effects on psychosocial adjustment in adolescence and young adulthood. © The Royal Australian and New Zealand College of Psychiatrists 2014.

  15. Effect of body mass index on diabetogenesis factors at a fixed fasting plasma glucose level.

    Science.gov (United States)

    Lin, Jiunn-Diann; Hsu, Chun-Hsien; Wu, Chung-Ze; Hsieh, An-Tsz; Hsieh, Chang-Hsun; Liang, Yao-Jen; Chen, Yen-Lin; Pei, Dee; Chang, Jin-Biou

    2018-01-01

    The present study evaluated the relative influence of body mass index (BMI) on insulin resistance (IR), first-phase insulin secretion (FPIS), second-phase insulin secretion (SPIS), and glucose effectiveness (GE) at a fixed fasting plasma glucose level in an older ethnic Chinese population. In total, 265 individuals aged 60 years with a fasting plasma glucose level of 5.56 mmol/L were enrolled. Participants had BMIs of 20.0-34.2 kg/m2. IR, FPIS, SPIS, and GE were estimated using our previously developed equations. Pearson correlation analysis was conducted to assess the correlations between the four diabetogenesis factors and BMI. A general linear model was used to determine the differences in the percentage of change among the four factor slopes against BMI. Significant correlations were observed between BMI and FPIS, SPIS, IR, and GE in both women and men, which were higher than those reported previously. In men, BMI had the most profound effect on SPIS, followed by IR, FPIS, and GE, whereas in women, the order was slightly different: IR, followed by FPIS, SPIS, and GE. Significant differences were observed among all these slopes, except for the slopes between FPIS and SPIS in women (p = 0.856) and IR and FPIS in men (p = 0.258). The contribution of obesity to all diabetes factors, except GE, was higher than that reported previously. BMI had the most profound effect on insulin secretion in men and on IR in women in this 60-year-old cohort, suggesting that lifestyle modifications for obesity reduction in women remain the most important method for improving glucose metabolism and preventing future type 2 diabetes mellitus.

  16. The effects of natural compounds-containing mouthrinses on patients with fixed orthodontic appliance treatment: clinical and microbiological outcomes.

    Science.gov (United States)

    Chen, Yong; Wong, Ricky W K; Seneviratne, Chaminda Jayampath; Hagg, Urban; McGrath, Colman; Samaranayake, Lakshman P

    2013-11-01

    To investigate the effects of two natural compounds-containing mouthrinses (NCCMs) (a fructus mume (FM) extract-containing mouthrinse and an essential oil (EO)-containing mouthrinse) on gingival health and microbial profiles in young orthodontic patients. This 6-month randomized, single-blinded, parallel-controlled clinical trial consists of 90 patients with fixed appliance treatment. The subjects were allocated to (1) negative control group: oral hygiene instruction (OHI) alone; (2) test group 1: OHI plus EO mouthrinse; and (3) test group 2: OHI plus FM mouthrinse. Clinical examinations included plaque index (PI), bleeding index (BI) and modified gingival index (MGI). Salivary microbial quantifications included total aerobic and anaerobic bacteria, Streptococci and Lactobacilli counts. Clinical and microbiological examinations were conducted at baseline, 3rd and 6th months (T1, T2, and T3). BI was significantly reduced in both the FM mouthrinse and EO mouthrinse groups compared with the negative control group at T3 (P 0.05). Both NCCMs effectively reduced gingival bleeding without causing significant alterations of microbial profile in young orthodontic patients. © 2012 John Wiley & Sons Ltd, BSPD and IAPD.

  17. Effects of rigid or adaptive confinement on colloidal self-assembly. Fixed vs. fluctuating number of confined particles

    Energy Technology Data Exchange (ETDEWEB)

    Pȩkalski, J.; Ciach, A. [Institute of Physical Chemistry, Polish Academy of Sciences, 01-224 Warszawa (Poland); Almarza, N. G. [Instituto de Química Física Rocasolano, CSIC, Serrano 119, E-28006 Madrid (Spain)

    2015-05-28

    The effects of confinement on colloidal self-assembly in the case of fixed number of confined particles are studied in the one dimensional lattice model solved exactly in the grand canonical ensemble (GCE) in Pȩkalski et al. [J. Chem. Phys. 142, 014903 (2015)]. The model considers a pair interaction defined by a short-range attraction plus a longer-range repulsion. We consider thermodynamic states corresponding to self-assembly into clusters. Both fixed and adaptive boundaries are studied. For fixed boundaries, there are particular states in which, for equal average densities, the number of clusters in the GCE is larger than in the canonical ensemble. The dependence of pressure on density has a different form when the system size changes with fixed number of particles and when the number of particles changes with fixed size of the system. In the former case, the pressure has a nonmonotonic dependence on the system size. The anomalous increase of pressure for expanding system is accompanied by formation of a larger number of smaller clusters. In the case of elastic confining surfaces, we observe a bistability, i.e., two significantly different system sizes occur with almost the same probability. The mechanism of the bistability in the closed system is different to that of the case of permeable walls, where the two equilibrium system sizes correspond to a different number of particles.

  18. Nitrogen fertilization has a stronger effect on soil nitrogen-fixing bacterial communities than elevated atmospheric CO2.

    Science.gov (United States)

    Berthrong, Sean T; Yeager, Chris M; Gallegos-Graves, Laverne; Steven, Blaire; Eichorst, Stephanie A; Jackson, Robert B; Kuske, Cheryl R

    2014-05-01

    Biological nitrogen fixation is the primary supply of N to most ecosystems, yet there is considerable uncertainty about how N-fixing bacteria will respond to global change factors such as increasing atmospheric CO2 and N deposition. Using the nifH gene as a molecular marker, we studied how the community structure of N-fixing soil bacteria from temperate pine, aspen, and sweet gum stands and a brackish tidal marsh responded to multiyear elevated CO2 conditions. We also examined how N availability, specifically, N fertilization, interacted with elevated CO2 to affect these communities in the temperate pine forest. Based on data from Sanger sequencing and quantitative PCR, the soil nifH composition in the three forest systems was dominated by species in the Geobacteraceae and, to a lesser extent, Alphaproteobacteria. The N-fixing-bacterial-community structure was subtly altered after 10 or more years of elevated atmospheric CO2, and the observed shifts differed in each biome. In the pine forest, N fertilization had a stronger effect on nifH community structure than elevated CO2 and suppressed the diversity and abundance of N-fixing bacteria under elevated atmospheric CO2 conditions. These results indicate that N-fixing bacteria have complex, interacting responses that will be important for understanding ecosystem productivity in a changing climate.

  19. A cost-effectiveness analysis of fixed-combination therapies in patients with open-angle glaucoma: a European perspective.

    Science.gov (United States)

    Hommer, A; Wickstrøm, J; Friis, M M; Steeds, C; Thygesen, J; Ferreras, A; Gouws, P; Buchholz, P

    2008-04-01

    To compare the efficacy and cost implications of the use of the intraocular pressure-lowering prostaglandin analogues bimatoprost, travoprost, and latanoprost as fixed-combination therapies with timolol, a beta-adrenergic receptor antagonist. A decision analytic cost-effectiveness model was constructed. Since no head-to-head studies comparing the three treatment options exist, the analysis was based on an indirect comparison. Hence, the model was based on efficacy data from five randomized, controlled, clinical studies. The studies were comparable with respect to study design, time horizon, patient population and type of end point presented. The measure of effectiveness was the percentage reduction of the intraocular pressure level from baseline. The cost evaluated was the cost of medication and clinical visits to the ophthalmologist. All drug costs were market prices inclusive of value-added tax, and visit costs were priced using official physician fees. Cost-effectiveness analyses were carried out in five European countries: Spain, Italy, United Kingdom, Norway and Sweden. The time horizon for the analyses was 3 months. The analysis showed that fixed-combination bimatoprost/timolol was more effective and less costly than fixed-combination travoprost/timolol and fixed-combination latanoprost/timolol in three out of the five countries analyzed. In two countries, bimatoprost/timolol was less costly than latanoprost/timolol, and cost the same as travoprost/timolol. This cost-effectiveness analysis showed that the fixed combination of bimatoprost 0.03%/timolol 0.5% administered once daily was a cost-effective treatment option for patients with primary open-angle glaucoma. This study was limited by available clinical data: without a head-to-head trial, indirect comparisons were necessary. In the United Kingdom, Sweden, Norway, Italy, and Spain, from a health service viewpoint, bimatoprost/timolol was a slightly more effective as well as less costly treatment strategy

  20. Computational Fluid Dynamics Simulations of Gas-Phase Radial Dispersion in Fixed Beds with Wall Effects

    Directory of Open Access Journals (Sweden)

    Anthony G. Dixon

    2017-10-01

    Full Text Available The effective medium approach to radial fixed bed dispersion models, in which radial dispersion of mass is superimposed on axial plug flow, is based on a constant effective dispersion coefficient, DT. For packed beds of a small tube-to-particle diameter ratio (N, the experimentally-observed decrease in this parameter near the tube wall is accounted for by a lumped resistance located at the tube wall, the wall mass transfer coefficient km. This work presents validated computational fluid dynamics (CFD simulations to obtain detailed radial velocity and concentration profiles for eight different computer-generated packed tubes of spheres in the range 5.04 ≤ N ≤ 9.3 and over a range of flow rates 87 ≤ Re ≤ 870 where Re is based on superficial velocity and the particle diameter dp. Initial runs with pure air gave axial velocity profiles vz(r averaged over the length of the packing. Then, simulations with the tube wall coated with methane yielded radial concentration profiles. A model with only DT could not describe the radial concentration profiles. The two-parameter model with DT and km agreed better with the bed-center concentration profiles, but not with the sharp decreases in concentration close to the tube wall. A three-parameter model based on classical two-layer mixing length theory, with a wall-function for the decrease in transverse radial convective transport in the near-wall region, showed greatly improved ability to reproduce the near-wall concentration profiles.

  1. Social capital, income inequality and the social gradient in self-rated health in Latin America: A fixed effects analysis.

    Science.gov (United States)

    Vincens, Natalia; Emmelin, Maria; Stafström, Martin

    2018-01-01

    Latin America is the most unequal region in the world. The current sustainable development agenda increased attention to health inequity and its determinants in the region. Our aim is to investigate the social gradient in health in Latin America and assess the effects of social capital and income inequality on it. We used cross-sectional data from the World Values Survey and the World Bank. Our sample included 10,426 respondents in eight Latin American countries. Self-rated health was used as the outcome. Education level was the socioeconomic position indicator. We measured social capital by associational membership, civic participation, generalized trust, and neighborhood trust indicators at both individual and country levels. Income inequality was operationalized using the Gini index at country-level. We employed fixed effects logistic regressions and cross-level interactions to assess the impact of social capital and income inequality on the heath gradient, controlling for country heterogeneity. Education level was independently associated with self-rated health, representing a clear social gradient in health, favoring individuals in higher socioeconomic positions. Generalized and neighborhood trust at country-level moderated the effect on the association between socioeconomic position and health, yet favoring individuals in lower socioeconomic positions, especially in lower inequality countries, despite their lower individual social capital. Our findings suggest that collective rather than individual social capital can impact the social gradient in health in Latin America, explaining health inequalities. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Model Specifications for Estimating Labor Market Returns to Associate Degrees: How Robust Are Fixed Effects Estimates? A CAPSEE Working Paper

    Science.gov (United States)

    Belfield, Clive; Bailey, Thomas

    2017-01-01

    Recently, studies have adopted fixed effects modeling to identify the returns to college. This method has the advantage over ordinary least squares estimates in that unobservable, individual-level characteristics that may bias the estimated returns are differenced out. But the method requires extensive longitudinal data and involves complex…

  3. A cost-effectiveness analysis of fixed-combination therapies in patients with open-angle glaucoma: a European perspective

    DEFF Research Database (Denmark)

    Hommer, A.; Wickstrom, J.; Friis, M.M.

    2008-01-01

    inclusive of value-added tax, and visit costs were priced using official physician fees. Cost-effectiveness analyses were carried out in five European countries: Spain, Italy, United Kingdom, Norway and Sweden. The time horizon for the analyses was 3 months. RESULTS: The analysis showed that fixed...

  4. Effect of manual tilt adjustments on incident irradiance on fixed and tracking solar panels

    International Nuclear Information System (INIS)

    Lubitz, William David

    2011-01-01

    Hourly typical meteorological year (TMY3) data was utilized with the Perez radiation model to simulate solar radiation on fixed, azimuth tracking and two axis tracking surfaces at 217 geographically diverse temperate latitude sites across the contiguous United States of America. The optimum tilt angle for maximizing annual irradiation on a fixed south-facing panel varied from being equal to the latitude at low-latitude, high clearness sites, to up to 14 o less than the latitude at a north-western coastal site with very low clearness index. Across the United States, the optimum tilt angle for an azimuth tracking panel was found to be on average 19 o closer to vertical than the optimum tilt angle for a fixed, south-facing panel at the same site. Azimuth tracking increased annual solar irradiation incident on a surface by an average of 29% relative to a fixed south-facing surface at optimum tilt angle. Two axis tracking resulted in an average irradiation increase of 34% relative to the fixed surface. Introduction of manual surface tilt changes during the year produced a greater impact for non-tracking surfaces than it did for azimuth tracking surfaces. Even monthly tilt changes only resulted in an average annual irradiation increase of 5% for fixed panels and 1% for azimuth tracked surfaces, relative to using a single optimized tilt angle in each case. In practice, the decision whether to manually tilt panels requires balancing the added cost in labor and the panel support versus the extra energy generation and the cost value of that energy. A spreadsheet file is available that gives individual results for each of the 217 simulated sites.

  5. Effectiveness of Different Bristle Designs of Toothbrushes and Periodontal Status among Fixed Orthodontic Patients: A Double-blind Crossover Design.

    Science.gov (United States)

    Naik, Sandhya P; Punathil, Sameer; Shetty, Praveena; Jayanti, Ipsita; Jalaluddin, Md; Avijeeta, Anisha

    2018-02-01

    The aim of the present study was to evaluate the effectiveness of different bristle designs of toothbrushes and the periodontal status among patients undergoing fixed orthodontic treatment. This randomized controlled trial (RCT) consisted of 45 adolescents (comprising 20 males and 25 females) undergoing fixed orthodontic treatment. The study participants were randomly allocated to three groups, each group being assigned a locally available toothbrush with a particular design of toothbrush bristle. In the first test phase, group I study participants were allocated to toothbrush with flat bristles, group II study subjects were allocated to toothbrush with zigzag bristles, and group III study participants were allocated to toothbrush with crisscross bristles. The study participants were recalled after 4 weeks to check the effectiveness of the allocated toothbrushes. A washout period of 1 week was maintained to ensure that there was no carryover effect of the different bristle designs. In the second test phase, each patient used the opposite toothbrush bristle design (group I: toothbrush with zigzag bristles, group II: toothbrush with crisscross bristles, and group III: toothbrush with flat bristles). Plaque scores were measured using Turesky-Gilmore-Glickman modification of Quigley-Hein plaque index (PI). In both phase 1 and 2 of this RCT, toothbrush with crisscross bristles exhibited maximum plaque reduction among the three different bristle design toothbrushes following 30 days (p = 0.312 ± 0.102 and 0.280 ± 0.110, respectively), which was statistically significant. It was concluded that all the three designs of toothbrushes were effective in removing plaque in patients with fixed orthodontic appliances. But among the three different toothbrushes, toothbrush with crisscross bristles showed the highest mean plaque reduction. Plaque accumulation around the orthodontic brackets and gingival margins is quite common among the fixed orthodontic patients, who encounter

  6. Effect of water salinity on wheat inoculated with N fixing bacteria using 15N tracer technique

    International Nuclear Information System (INIS)

    Al-Sayed, M. A.; Soliman, S. M.; Galal, Y. G. M.; El-Hadidi, E. M.

    2012-12-01

    A pot experiment was carried out under greenhouse controlled conditions to investigate the effect of water salinity and bacterial inoculation on growth parameters and nutrient uptake by wheat ( Triticum aestivum, L. seda 6). Dry matter yield of shoots was gradually increased with increasing water salinity levels under dual inoculation (Rh + Az). This phenomenon was more pronounced with 6 ds m -1 rather than 3 ds m -1 water salinity level. This holds true with all inoculation treatments. Similar trend was noticed with root dry matter yield. N uptake by shoots was positively affected by water salinity levels under bacterial inoculation especially the dual treatments where N uptake tended to increase with increasing water salinity levels. N uptake by roots was severely affected by increasing water salinity levels as compared to fresh water treatment. N uptake by shoots was enhanced by inoculation under different water salinity levels as compared to the un inoculated treatment. Nitrogen uptake roots was dramatically affected by inoculation. It was only increased by inoculation when plants were irrigated with fresh water. Portions of Ndff were frequently affected by both water salinity levels and microbial inoculation. wheat plant as representative of cereal crops was more dependent on the portion of nitrogen up taken from fertilizer rather than those fixed from the air. Therefore, the plant-bacteria association was not efficient enough. Inoculated treatments compensated considerable amounts of its N demand from air beside those derived from fertilizer, therefore the remained N from fertilizer in soil was higher than those of un inoculated control which is more dependable on Ndff as well as Ndf s. 1 5N recovery by wheat plants was enhanced by bacterial inoculation as well as water salinity levels did. (Author)

  7. The Great Recession and the Health of Young Children: A Fixed Effects Analysis in Ireland.

    Science.gov (United States)

    Reinhard, Erica; Layte, Richard; McCrory, Cathal; Panico, Lidia; Avendano, Mauricio

    2018-01-12

    Economic recessions have been linked to adult health, but few studies have examined how recessions influence the health of young children. This study examines the impact of life transitions linked to the financial crisis in Ireland on the health of young children. Data came from the Growing Up in Ireland Infant Cohort Study (n = 11,134), which assessed children before (2008), during (2011), and after (2013) the recession and incorporated questions on the impacts of the financial crisis on families. Using fixed effects models to control for confounding, we found that a reduction in welfare benefits during the recession was associated with a significant increase in the risk of asthma (β = 0.0136, 95% confidence interval (95% CI): 0.0062, 0.0328) and atopy (β = 0.0161, 95% CI: 0.0026, 0.0297). While parental job loss was not associated with child health, a reduction in working hours was associated with increased reports of fair or poor child health (β = 0.0235, 95% CI: 0.0041, 0.0429), as were difficulties affording basics (β = 0.0193, 95% CI: 0.0005, 0.0381). Results suggest that failing to protect vulnerable families and children during economic recessions may have long-lasting implications for child health. © The Author(s) 2018. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  8. Aviation NOx-induced CH4 effect: Fixed mixing ratio boundary conditions versus flux boundary conditions

    Science.gov (United States)

    Khodayari, Arezoo; Olsen, Seth C.; Wuebbles, Donald J.; Phoenix, Daniel B.

    2015-07-01

    Atmospheric chemistry-climate models are often used to calculate the effect of aviation NOx emissions on atmospheric ozone (O3) and methane (CH4). Due to the long (∼10 yr) atmospheric lifetime of methane, model simulations must be run for long time periods, typically for more than 40 simulation years, to reach steady-state if using CH4 emission fluxes. Because of the computational expense of such long runs, studies have traditionally used specified CH4 mixing ratio lower boundary conditions (BCs) and then applied a simple parameterization based on the change in CH4 lifetime between the control and NOx-perturbed simulations to estimate the change in CH4 concentration induced by NOx emissions. In this parameterization a feedback factor (typically a value of 1.4) is used to account for the feedback of CH4 concentrations on its lifetime. Modeling studies comparing simulations using CH4 surface fluxes and fixed mixing ratio BCs are used to examine the validity of this parameterization. The latest version of the Community Earth System Model (CESM), with the CAM5 atmospheric model, was used for this study. Aviation NOx emissions for 2006 were obtained from the AEDT (Aviation Environmental Design Tool) global commercial aircraft emissions. Results show a 31.4 ppb change in CH4 concentration when estimated using the parameterization and a 1.4 feedback factor, and a 28.9 ppb change when the concentration was directly calculated in the CH4 flux simulations. The model calculated value for CH4 feedback on its own lifetime agrees well with the 1.4 feedback factor. Systematic comparisons between the separate runs indicated that the parameterization technique overestimates the CH4 concentration by 8.6%. Therefore, it is concluded that the estimation technique is good to within ∼10% and decreases the computational requirements in our simulations by nearly a factor of 8.

  9. Long working hours and sickness absence-a fixed effects design.

    Science.gov (United States)

    Bernstrøm, Vilde Hoff

    2018-05-02

    While long working hours seem to lead to impaired health, several studies have also shown that long working hours are related to lower levels of sickness absence. Previous studies on the relationship between long working hours and sickness absence have compared those who work long hours to those who do not, looking only at between-individual correlations. Those results might therefore reflect relatively stable differences between employees who typically work long hours and employees who typically do not. The aim of the present study is to examine within-individual correlations between long working hours and sickness absence. Records from the Human Resources department in a large Norwegian hospital from 2012 to 2015 provided objective data on both working hours and sickness absence. Two analyses were performed: a prospective cohort analysis to replicate the results from previous between-individual analyses and a second analysis of within-individual correlations using a fixed effect design. In line with existing research, both between-individual and within-individual analyses showed a negative relationship between long working hours (> 48 h/week) and short-term sickness absence (1-8 days) and no significant difference in incidence of long-term sickness absence (> 8 days). The results indicate that the negative relationship between long working hours and sickness absence is not due only to relatively stable individual differences between those who typically work long hours and those who do not. The results from both analyses therefore still contrast with previous research showing a negative relationship between long working hours and other health indicators.

  10. Effect of fixed orthodontic appliances on salivary microbial parameters at 6 months: a controlled observational study

    Directory of Open Access Journals (Sweden)

    Delphine MARET

    2014-01-01

    Full Text Available Objective: The aim of this study was to assess the microbial changes in children with fixed orthodontic appliances compared with a control group of children without orthodontic treatment. Material and Methods: Ninety-five children, aged between 12 and 16 years, participated in this study. Forty-eight subjects were fitted with fixed orthodontic appliances and forty-seven were free of any such appliances. The follow-up was 6 months for all children. The association between orthodontic appliances and high levels of Streptococcus mutans and Lactobacillus spp was assessed with logistic regression models, taking age, sex, pH and buffer capacity into account. Results: Differences at baseline between the two groups were not statistically significant. We found that wearing a fixed orthodontic appliance was associated with high levels of Streptococcus mutans and Lactobacillus spp (adjusted OR: 6.65, 95% CI [1.98-22.37]; 9.49, 95% CI [2.57-35.07], respectively, independently of other variables. Conclusion: The originality of the present epidemiological study was to evaluate the evolution of salivary microbial parameters in a population of children with fixed orthodontic appliances. Our results show an increase of Streptococcus mutans and Lactobacillus spp values during the follow-up. The whole dental workforce should be aware that preventive measures are of paramount importance during orthodontic treatment.

  11. Effect of Fixed Orthodontic Treatment on Salivary Flow, pH and Microbial Count

    Directory of Open Access Journals (Sweden)

    Sepideh Arab

    2016-08-01

    Full Text Available Objectives: The present study was designed to evaluate the changes in saliva properties and oral microbial flora in patients undergoing fixed orthodontic treatment.Materials and Methods: Two important saliva properties namely the salivary flow rate and pH as well as oral microbial flora were assessed in 30 orthodontic patients before starting fixed orthodontic treatment and after six, 12 and 18 weeks of treatment. Selective media, Sabouraud dextrose agar, Mitis salivarius agar and Rogosa agar were used for isolation of Candida albicans, Streptococcus mutans and Lactobacillus acidophilus, respectively. Statistical analysis was performed using Friedman and Dunn’s tests. P< 0.05 was considered statistically significant.Results: After six, 12 and 18 weeks of commencing fixed orthodontic treatment, the total colony counts of Candida albicans, Streptococcus mutans and Lactobacillus acidophilus showed a significant increase. The saliva pH decreased during the orthodontic treatment (P< 0.05 while the salivary flow did not change significantly. Conclusions: Fixed orthodontic treatment causes major changes in the saliva properties. The changes in oral microflora and saliva properties show the importance of caries preventive measures during orthodontic treatment.

  12. Effect of fixed orthodontic appliances on salivary microbial parameters at 6 months : a controlled observational study

    NARCIS (Netherlands)

    Maret, Delphine; Marchal-Sixou, Christine; Vergnes, Jean-Noel; Hamel, Olivier; Georgelin-Gurgel, Marie; Van Der Sluis, Lucas; Sixou, Michel

    2014-01-01

    Objective: The aim of this study was to assess the microbial changes in children with fixed orthodontic appliances compared with a control group of children without orthodontic treatment. Material and Methods: Ninety-five children, aged between 12 and 16 years, participated in this study.

  13. Effects of oxytetracycline on the abundance and community structure of nitrogen-fixing bacteria during cattle manure composting.

    Science.gov (United States)

    Sun, Jiajun; Qian, Xun; Gu, Jie; Wang, Xiaojuan; Gao, Hua

    2016-09-01

    The effects of oxytetracycline (OTC) on nitrogen-fixing bacterial communities were investigated during cattle manure composting. The abundance and community structure of nitrogen-fixing bacteria were determined by qPCR and denaturing gradient gel electrophoresis (DGGE), respectively. The matrix was spiked with OTC at four levels: no OTC, 10mg/kg dry weight (DW) OTC (L), 60mg/kg DW OTC (M), and 200mg/kg DW OTC (H). The high temperature period of composting was shorter with M and H, and the decline in temperature during the cooling stage was accelerated by OTC. OTC had a concentration-dependent inhibitory effect on the nitrogenase activity during early composting, and the nifH gene abundance declined significantly during the later composting stage. The DGGE profile and statistical analysis showed that OTC changed the nitrogen-fixing bacterial community succession and reduced the community richness and dominance. The nitrogen-fixing bacterial community structure was affected greatly by the high level of OTC. Copyright © 2016. Published by Elsevier Ltd.

  14. Optical potentials derived from microscopic separable interactions including binding and recoil effects

    International Nuclear Information System (INIS)

    Siciliano, E.R.; Walker, G.E.

    1976-01-01

    We first consider a projectile scattering from a nucleon bound in a fixed potential. A separable Galilean invariant projectile-nucleon interaction is adopted. Without using the fixed scatterer approximation or using closure on the intermediate target nucleon states we obtain various forms for the projectile-bound nucleon t matrix. Effects due to intermediate target excitation and nucleon recoil are discussed. By making the further approximations of closure and fixed scatterers we make connection with the work of previous authors. By generalizing to projectile interaction with several bound nucleons and examining the appropriate multiple scattering series we identify the optical potential for projectile elastic scattering from the many-body system. Different optical potentials are obtained for different projectile-bound nucleon t matrices, and we study the differences predicted by these dissimilar optical potentials for elastic scattering. In a model problem, we study pion-nucleus elastic scattering and compare the predictions obtained by adopting procedures used by (1) Landau, Phatak, and Tabakin and (2) Piepho-Walker to the predictions obtained in a less restrictive, but computationally difficult treatment

  15. Long-lasting complete response status of advanced stage IV gall bladder cancer and colon cancer after combined treatment including autologous formalin-fixed tumor vaccine: two case reports.

    Science.gov (United States)

    Imaoka, Yuki; Kuranishi, Fumito; Miyazaki, Tsubasa; Yasuda, Hiroko; Ohno, Tadao

    2017-09-11

    The prognosis of advanced (stage IV) cancer of the digestive organs is very poor. We have previously reported a case of advanced breast cancer with bone metastasis that was successfully treated with combined treatments including autologous formalin-fixed tumor vaccine (AFTV). Herein, we report the success of this approach in advanced stage IV (heavily metastasized) cases of gall bladder cancer and colon cancer. Case 1: A 61-year-old woman with stage IV gall bladder cancer (liver metastasis and lymph node metastasis) underwent surgery in May 2011, including partial resection of the liver. She was treated with AFTV as the first-line adjuvant therapy, followed by conventional chemotherapy. This patient is still alive without any recurrence, as confirmed with computed tomography, for more than 5 years. Case 2: A 64-year-old man with stage IV colon cancer (multiple para-aortic lymph node metastases and direct abdominal wall invasion) underwent non-curative surgery in May 2006. Following conventional chemotherapy, two courses of AFTV and radiation therapy were administered sequentially. This patient has had no recurrence for more than 5 years. We report the success of combination therapy including AFTV in cases of liver-metastasized gall bladder cancer and abdominal wall-metastasized colon cancer. Both patients experienced long-lasting, complete remission. Therefore, combination therapies including AFTV should be considered in patients with advanced cancer of the digestive organs.

  16. Effect of selecting a fixed dephosphorylation rate on the estimation of rate constants and rCMRGlu from dynamic [18F] fluorodeoxyglucose/PET data

    International Nuclear Information System (INIS)

    Dhawan, V.; Moeller, J.R.; Strother, S.C.; Evans, A.C.; Rottenberg, D.A.

    1989-01-01

    Several publications have discussed the estimation and physiologic significance of regional [ 18 F]fluorodeoxyglucose (FDG) rate constants and metabolic rates. Most of these studies analyzed dynamic data collected over 45-60 min; three rate constants (k1-k3) and blood volume (Vb) were estimated and the regional cerebral metabolic rate for glucose (rCMRGlu) was subsequently derived using the measured blood glucose value and a regionally invariant value of the lumped constant (LC). The dephosphorylation rate constant (k4) was either neglected, or a fixed value was used in the estimation procedure to obtain the remaining parameters. To compare the rate constants obtained by different authors using different values of k4 is impossible without knowledge of the effect of selecting different fixed values of k4 (including zero) on the estimated rate constants and rCMRGlu. Based on our analysis of FDG/PET data from nine normal volunteer subjects, we conclude that inclusion of a fixed value for k4, in spite of a scaling effect on the absolute values of model parameters, has no effect on the coefficient of variation (CV) of within- and between-subject parameter estimates and glucose metabolic rates

  17. Globalisation and national trends in nutrition and health: A grouped fixed-effects approach to intercountry heterogeneity.

    Science.gov (United States)

    Oberlander, Lisa; Disdier, Anne-Célia; Etilé, Fabrice

    2017-09-01

    Using a panel dataset of 70 countries spanning 42 years (1970-2011), we investigate the distinct effects of social globalisation and trade openness on national trends in markers of diet quality (supplies of animal proteins, free fats and sugar, average body mass index, and diabetes prevalence). Our key methodological contribution is the application of a grouped fixed-effects estimator, which extends linear fixed-effects models. The grouped fixed-effects estimator partitions our sample into distinct groups of countries in order to control for time-varying unobserved heterogeneity that follows a group-specific pattern. We find that increasing social globalisation has a significant impact on the supplies of animal protein and sugar available for human consumption, as well as on mean body mass index. Specific components of social globalisation such as information flows (via television and the Internet) drive these results. Trade openness has no effect on dietary outcomes or health. These findings suggest that the social and cultural aspects of globalisation should receive greater attention in research on the nutrition transition. Copyright © 2017 John Wiley & Sons, Ltd.

  18. Effect of Fixed Orthodontic Treatment on Salivary Flow, pH and Microbial Count.

    Science.gov (United States)

    Arab, Sepideh; Nouhzadeh Malekshah, Sepideh; Abouei Mehrizi, Ehsan; Ebrahimi Khanghah, Anita; Naseh, Roya; Imani, Mohammad Moslem

    2016-01-01

    The present study was designed to evaluate the changes in saliva properties and oral microbial flora in patients undergoing fixed orthodontic treatment. Two important saliva properties namely the salivary flow rate and pH as well as oral microbial flora were assessed in 30 orthodontic patients before starting fixed orthodontic treatment and after six, 12 and 18 weeks of treatment. Selective media, Sabouraud dextrose agar, Mitis salivarius agar and Rogosa agar were used for isolation of Candida albicans, Streptococcus mutans and Lactobacillus acidophilus, respectively. Statistical analysis was performed using Friedman and Dunn's tests. Porthodontic treatment, the total colony counts of Candida albicans, Streptococcus mutans and Lactobacillus acidophilus showed a significant increase. The saliva pH decreased during the orthodontic treatment (Porthodontic treatment causes major changes in the saliva properties. The changes in oral microflora and saliva properties show the importance of caries preventive measures during orthodontic treatment.

  19. Clinical Effectiveness of Using Aesthetic Fixed Prosthetic Appliances with Combined Occlusal Surface

    Directory of Open Access Journals (Sweden)

    Andrii Biben

    2017-06-01

    Conclusions. Aesthetic fixed prosthetic appliances with combined occlusal surface demonstrated high functional and aesthetic characteristics. The use of the USHPS system showed a decisive advantage of milled frameworks and combined occlusal surface over traditional cast ceramic frameworks.The combination of high mechanical, strength and tribological properties of zirconium dioxide and high biological as well as aesthetic properties of ceramic materials helped reveal high clinical characteristics of aesthetic appliances with combined occlusal surface.

  20. Effectiveness of high temperature innovative geometry fixed ceramic matrix regenerators used in glass furnaces

    Directory of Open Access Journals (Sweden)

    Wołkowycki Grzegorz

    2016-03-01

    Full Text Available The paper presents the effectiveness of waste heat recovery regenerators equipped with innovative ceramic matrix forming an integral part of a real glass furnace. The paper full description of the regenerators’ matrix structure with its dimensions, thermo-physical properties and operating parameters is included experimentally determined was the effectiveness of the regenerators has been descrbed using the obtained experimental data such as the operating temperature, gas flows as well as the gases generated during the liquid glass manufacturing process. The effectiveness values refer not only to the heating cycle when the regenerator matrix is heated by combustion gases but also to the cooling cycle in which the matrix is cooled as a result of changes in the direction of the flowing gas. On the basis of the determined effectiveness values for both cycles and measurement uncertainties it was possible, to calculate the weighted average efficiency for each of the regenerators.

  1. Effect of treatment with fixed and removable dental prostheses. An oral health-related quality of life study

    DEFF Research Database (Denmark)

    Øzhayat, Esben Boeskov; Gotfredsen, Klaus

    2012-01-01

    The aim of the study was to evaluate patient-reported effects of treatment with fixed dental prostheses (FDP) and removable dental prostheses (RDP) and relate the change in Oral Health Related Quality of Life (OHRQoL) to the type of treatment and objective dental variables of aesthetics and masti......The aim of the study was to evaluate patient-reported effects of treatment with fixed dental prostheses (FDP) and removable dental prostheses (RDP) and relate the change in Oral Health Related Quality of Life (OHRQoL) to the type of treatment and objective dental variables of aesthetics...... were obtained. The participants completed the Oral Health Impact Profile 49 (OHIP-49) before and after treatment. A control group with no need for dental treatment also completed the OHIP-49. All participants had a significant improvement in OHRQoL. The improvement was higher for the RDP group than...

  2. Effect of kinetic properties of extraction systems on separation of some elements by liquid chromatography method with free fixed phase

    International Nuclear Information System (INIS)

    Fedotov, P.S.; Maryutina, T.A.; Pichugin, A.A.; Spivakov, B.Ya.

    1993-01-01

    Effect of kinetic properties of a series of extraction systems on the separation of certain elements by the method of liquid chromatography with free fixed phase is considered. Chromatographic behaviour of europium 3 and iron 3 ions when using systems based on di-2-ethylhexylphosphovers acid and tetraphenylmethylenediphosphine dioxide is investigated. Kinetic properties of the extraction systems used are studied by diffusion cell method with mixing, europium 3 and iron 3 mass transfer coefficients are determined

  3. Clinical effectiveness of brinzolamide 1%–brimonidine 0.2% fixed combination for primary open-angle glaucoma and ocular hypertension

    Directory of Open Access Journals (Sweden)

    Sharma S

    2015-11-01

    Full Text Available Sourabh Sharma,1 Sameer Trikha,1 Shamira A Perera,1 Tin Aung1,2 1Glaucoma Department, Singapore Eye Research Institute, Singapore National Eye Centre, 2Department of Ophthalmology, Yong Loo Lin School of Medicine, National University of Singapore, Singapore Abstract: The main first-line treatment strategy for glaucoma is to reduce intraocular pressure (IOP by topical ocular hypotensive medications, but many patients require multiple medications for adequate IOP control. Fixed-combination therapies provide several benefits, including simplified treatment regimens, theoretical improved treatment adherence, elimination of the potential for washout of the first drug by the second, and the reduction in ocular exposure to preservatives. β-Adrenoceptor antagonists (particularly 0.5% timolol are the most commonly used agents in combination with other classes of drugs as fixed-combination eyedrops, but they are contraindicated in many patients, owing to local allergy or systemic side effects. A fixed-combination preparation without a β-blocker is therefore warranted. This paper reviews the clinical effectiveness of brinzolamide 1% and brimonidine 0.2% fixed combination (BBFC for use in patients with primary open-angle glaucoma and ocular hypertension. We searched PubMed and the ClinicalTrials.gov registry, and identified three randomized controlled trials comparing BBFC vs its constituents (brimonidine vs brinzolamide, and one comparing BBFC with unfixed brimonidine and brinzolamide. All of the studies demonstrated mean diurnal IOP to be statistically significantly lower in the BBFC group compared with constituent groups and noninferior to that with the concomitant group using two separate bottles. The safety profile of BBFC was consistent with that of its individual components, the most common ocular adverse events being ocular hyperemia, visual disturbances, and ocular allergic reactions. Common systemic adverse effects included altered taste

  4. Does disability status modify the association between psychosocial job quality and mental health? A longitudinal fixed-effects analysis.

    Science.gov (United States)

    Milner, A; Krnjacki, L; Butterworth, P; Kavanagh, A; LaMontagne, Anthony D

    2015-11-01

    People with disabilities have difficulties in obtaining work. However, evidence suggests that those with disabilities derive substantial mental health benefits from employment. This paper assesses how the relationship between work and mental health is influenced by psychosocial job quality for people working with a disability. The study design was a longitudinal cohort with 13 annual waves of data collection, yielding a sample of 122,883 observations from 21,848 people. Fixed-effects within-person regression was used to control for time invariant confounding. The Mental Component Summary (MCS) of the Short Form 36 (SF-36) measure was used as the primary outcome measure. The main exposure was a six-category measure of psychosocial job quality and employment status (including 'not in the labour force' [NILF] and unemployment). Disability status ('no waves of disability reported' and 'all contributed waves with reported disability') was assessed as an effect modifier. We also conducted a secondary analysis on respondents contributing both disability and non-disability waves. For those with no disability, the greatest difference in mental health (compared to optimal employment) occurs when people have the poorest quality jobs (-2.12, 95% CI -2.48, -1.75, p job was similar between the poorest quality jobs (-2.25, 95% CI -3.84, -0.65, p = 0.006), NILF (-2.84, 95% CI -4.49, -1.20, p = 0.001) or unemployment (-2.56, 95% CI -4.32, -0.80, p = 0.004). These results were confirmed by the secondary analysis. Efforts to improve psychosocial job quality may have significant mental health benefits for people with disabilities. This will contribute to the economic viability of disability employment insurance schemes in Australia and other high-income countries. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Study on carbon-fixing,oxygen-releasing,temperature-reducing and humidity-increasing effects of evergreen plants in south highway

    Directory of Open Access Journals (Sweden)

    LIU Minmin

    2014-04-01

    Full Text Available Li-6400 portable photosynthesis system,was used to test the diurnal variations of photosynthetic rate and stomatal conductance of evergreen plants in Southern Highway,and to calculate their ability of absorbing carbon dioxide and releasing oxygen and to calculate the transpiring water volume and absorbing heat quantity of plants.Results showed that Euonymus fortunei Hand-Mazz,Hedera helix.Aucuba eriobotryaefolia had better carbon-fixing and oxygen-releasing effects,while Photinia serrulata,Trachycarpus fortunei,Radix Ophiopogonis had worse carbon-fixing and oxygen-releasing effects.Radix Ophiopogonis,Photinia glabra,Euonymus fortunei Hand.-Mazz had higher cooling and humidification ability,while Photinia serrulata,Trachycarpus fortunei did not act as well as them.Euonymus fortunei Hand.-Mazz and Hedera helix had higher leaf chlorophyll in per unit mass,values are 12.91、10.34、9.93 mg·g-1.Radix Ophiopogonis、Cinnamomum camphora(Linn. Presl and Trachycarpus fortunei had lower leaf chlorophyll in per unit mass,value is 3.55、2.67、2.06 mg·g-1.Releasing oxygen,fixing carbon,net assimilation and chlorophyll content has good correlation(P<0.05.

  6. Adhesives for fixed orthodontic bands.

    Science.gov (United States)

    Millett, Declan T; Glenny, Anne-Marie; Mattick, Rye Cr; Hickman, Joy; Mandall, Nicky A

    2016-10-25

    Orthodontic treatment involves using fixed or removable appliances (dental braces) to correct the positions of teeth. It has been shown that the quality of treatment result obtained with fixed appliances is much better than with removable appliances. Fixed appliances are, therefore, favoured by most orthodontists for treatment. The success of a fixed orthodontic appliance depends on the metal attachments (brackets and bands) being attached securely to the teeth so that they do not become loose during treatment. Brackets are usually attached to the front and side teeth, whereas bands (metal rings that go round the teeth) are more commonly used on the back teeth (molars). A number of adhesives are available to attach bands to teeth and it is important to understand which group of adhesives bond most reliably, as well as reducing or preventing dental decay during the treatment period. To evaluate the effectiveness of the adhesives used to attach bands to teeth during fixed appliance treatment, in terms of:(1) how often the bands come off during treatment; and(2) whether they protect the banded teeth against decay during fixed appliance treatment. The following electronic databases were searched: Cochrane Oral Health's Trials Register (searched 2 June 2016), Cochrane Central Register of Controlled Trials (CENTRAL; 2016, Issue 5) in the Cochrane Library (searched 2 June 2016), MEDLINE Ovid (1946 to 2 June 2016) and EMBASE Ovid (1980 to 2 June 2016). We searched ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. Randomised and controlled clinical trials (RCTs and CCTs) (including split-mouth studies) of adhesives used to attach orthodontic bands to molar teeth were selected. Patients with full arch fixed orthodontic appliance(s) who had bands attached to molars were included. All review authors

  7. Towards the characterization of short-term memory of zebrafish: effect of fixed versus random reward location.

    Science.gov (United States)

    Fernandes, Yohaan; Talpos, Andrea; Gerlai, Robert

    2015-01-02

    The zebrafish has been proposed as an efficient tool for the analysis of behavioral and neurobiological mechanisms of learning and memory. However, compared to traditional laboratory rodents, it is a relatively newcomer. In fact, only limited information on its mnemonic and cognitive abilities has been obtained, and only a small number of learning and memory paradigms have been available for its testing. Previously, we have shown that zebrafish are capable of learning the systematic alternating sequence of reward location in a shuttle box task in which we evaluated behavioral responses manually. Here, we employ a computerized, automated version of this task. We study whether zebrafish can remember the prior location of a reward (the sight of conspecifics) when the location is fixed (constant), or when the sequence of the location of presentation randomly changes between the left and the right side of the experimental tank. We also analyze performance features including the swim speed of experimental fish as well as the temporal changes of the position of fish when the reward (stimulus) is not presented. Our results show that under both the fixed and randomly changing reward location conditions zebrafish exhibit a significant preference for the prior location of reward, albeit the preference is stronger under the fixed location condition. We conclude that adult zebrafish have short-term associative memory that can be induced and quantified in an automated manner. Copyright © 2014 Elsevier Inc. All rights reserved.

  8. The Effect of Shorter Treatment Regimens for Hepatitis C on Population Health and Under Fixed Budgets.

    Science.gov (United States)

    Morgan, Jake R; Kim, Arthur Y; Naggie, Susanna; Linas, Benjamin P

    2018-01-01

    Direct acting antiviral hepatitis C virus (HCV) therapies are highly effective but costly. Wider adoption of an 8-week ledipasvir/sofosbuvir treatment regimen could result in significant savings, but may be less efficacious compared with a 12-week regimen. We evaluated outcomes under a constrained budget and cost-effectiveness of 8 vs 12 weeks of therapy in treatment-naïve, noncirrhotic, genotype 1 HCV-infected black and nonblack individuals and considered scenarios of IL28B and NS5A resistance testing to determine treatment duration in sensitivity analyses. We developed a decision tree to use in conjunction with Monte Carlo simulation to investigate the cost-effectiveness of recommended treatment durations and the population health effect of these strategies given a constrained budget. Outcomes included the total number of individuals treated and attaining sustained virologic response (SVR) given a constrained budget and incremental cost-effectiveness ratios. We found that treating eligible (treatment-naïve, noncirrhotic, HCV-RNA budget among both black and nonblack individuals, and our results suggested that NS5A resistance testing is cost-effective. Eight-week therapy provides good value, and wider adoption of shorter treatment could allow more individuals to attain SVR on the population level given a constrained budget. This analysis provides an evidence base to justify movement of the 8-week regimen to the preferred regimen list for appropriate patients in the HCV treatment guidelines and suggests expanding that recommendation to black patients in settings where cost and relapse trade-offs are considered.

  9. An impedance function approach for soil-structure interaction analyses including structure-to-structure interaction effects

    International Nuclear Information System (INIS)

    Gantayat, A.; Kamil, H.

    1981-01-01

    The dynamic soil-structure and structure-to-structure interaction effects may be determined in one of the two ways: by modeling the entire soil-structure system by a finite-element model, or by using a frequency-dependent (or frequency-independent) impedance function approach. In seismic design of nuclear power plant structures, the normal practice is to use the first approach because of its simplicity and easy availability of computer codes to perform such analyses. However, in the finite-element approach, because of the size and cost restrictions, the three-dimensional behavior of the entire soil-structure system and the radiation damping in soil are only approximately included by using a two-dimensional finite-element mesh. In using the impedance function approach, the soil-structure analyses can be performed in four steps: (a) determination of the dynamic properties of the fixed base superstructure, (b) determination of foundation and structure impedance matrices and input motions, (c) evaluation of foundation motion, (d) analysis of the fixed base superstructure using computed foundation motion. (orig./RW)

  10. Transient Effects in Fischer-Tropsch Reactor with a Fixed Bed of Catalyst Particles

    Directory of Open Access Journals (Sweden)

    I. V. Derevich

    2015-01-01

    Full Text Available Based on analysis of small temperature disturbances in the Fischer-Tropsch reactor with a fixed bed of catalyst particles various scenarios of thermal instability were investigated. There are two possible scenarios of thermal instability of the reactor. First, thermal explosion may occur due to growth of temperature disturbances inside a catalytic granule. Second scenario connected with loss of thermal stability as a result of an initial increase in temperature in the reactor volume. The boundaries of thermal stability of the reactor were estimated by solving the eigenvalue problems for spherical catalyst particles and cylindrical reactor. Processes of diffusional resistance inside the catalytic granule and heat transfer from wall of the reactor tube are taken into account. Estimation of thermal stability area is compared with the results of numerical simulation of behavior of temperature and concentration of synthesis gas.

  11. Combining fixed effects and instrumental variable approaches for estimating the effect of psychosocial job quality on mental health: evidence from 13 waves of a nationally representative cohort study.

    Science.gov (United States)

    Milner, Allison; Aitken, Zoe; Kavanagh, Anne; LaMontagne, Anthony D; Pega, Frank; Petrie, Dennis

    2017-06-23

    Previous studies suggest that poor psychosocial job quality is a risk factor for mental health problems, but they use conventional regression analytic methods that cannot rule out reverse causation, unmeasured time-invariant confounding and reporting bias. This study combines two quasi-experimental approaches to improve causal inference by better accounting for these biases: (i) linear fixed effects regression analysis and (ii) linear instrumental variable analysis. We extract 13 annual waves of national cohort data including 13 260 working-age (18-64 years) employees. The exposure variable is self-reported level of psychosocial job quality. The instruments used are two common workplace entitlements. The outcome variable is the Mental Health Inventory (MHI-5). We adjust for measured time-varying confounders. In the fixed effects regression analysis adjusted for time-varying confounders, a 1-point increase in psychosocial job quality is associated with a 1.28-point improvement in mental health on the MHI-5 scale (95% CI: 1.17, 1.40; P variable analysis, a 1-point increase psychosocial job quality is related to 1.62-point improvement on the MHI-5 scale (95% CI: -0.24, 3.48; P = 0.088). Our quasi-experimental results provide evidence to confirm job stressors as risk factors for mental ill health using methods that improve causal inference. © The Author 2017. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  12. PTAC: a computer program for pressure-transient analysis, including the effects of cavitation. [LMFBR

    Energy Technology Data Exchange (ETDEWEB)

    Kot, C A; Youngdahl, C K

    1978-09-01

    PTAC was developed to predict pressure transients in nuclear-power-plant piping systems in which the possibility of cavitation must be considered. The program performs linear or nonlinear fluid-hammer calculations, using a fixed-grid method-of-characteristics solution procedure. In addition to pipe friction and elasticity, the program can treat a variety of flow components, pipe junctions, and boundary conditions, including arbitrary pressure sources and a sodium/water reaction. Essential features of transient cavitation are modeled by a modified column-separation technique. Comparisons of calculated results with available experimental data, for a simple piping arrangement, show good agreement and provide validation of the computational cavitation model. Calculations for a variety of piping networks, containing either liquid sodium or water, demonstrate the versatility of PTAC and clearly show that neglecting cavitation leads to erroneous predictions of pressure-time histories.

  13. Radiosensitization effect by combination with paclitaxel in vivo, including the effect on intratumor quiescent cells

    International Nuclear Information System (INIS)

    Masunaga, Shin-ichiro; Ono, Koji; Suzuki, Minoru; Nishimura, Yasumasa; Kinashi, Yuko; Takagaki, Masao; Hori, Hitoshi; Nagasawa, Hideko; Uto, Yoshihiro; Tsuchiya, Izumi; Sadahiro, Sotaro; Murayama, Chieko

    2001-01-01

    Purpose: To evaluate the radiosensitization effect on solid tumors upon combination treatment with paclitaxel (TXL), including the effect on intratumor quiescent (Q) cells. Methods and Materials: Mice bearing SCC VII or EL4 solid tumors received 5-bromo-2'-deoxyuridine (BrdU) continuously for 5 days to label all proliferating (P) cells. The mice then received γ-irradiation with or without tirapazamine (TPZ) at various time points after TXL administration. Another group of mice received a series of test doses of γ-rays while alive or after tumor clamping to obtain hypoxic fractions (HFs) in the tumors at various time points after TXL administration. Immediately after irradiation, the tumor cells were isolated and incubated with a cytokinesis blocker. The micronucleus (MN) frequency in cells without BrdU labeling (Q cells) was determined using immunofluorescence staining for BrdU. Meanwhile, 6 h after irradiation, the tumor cells were isolated from the solid tumors in another group of mice, and the apoptosis frequency in Q cells was also determined with immunofluorescence staining for BrdU. The MN and apoptosis frequency in total (P+Q) tumor cells were determined from the tumors that were not pretreated with BrdU. For the measurement of the HFs, the MN or apoptosis frequency of Q cells was then used to calculate the surviving fraction of Q cells from the regression line for the relationship between the MN or apoptosis frequency and the surviving fraction of total tumor cells. Results: In both SCC VII and EL4 tumors, maximum values of mitotic index (MI) and apoptosis frequency were observed 9 and 24 h after TXL administration, respectively. However, on the whole, the apoptosis frequency for SCC VII was very low. γ-Irradiation 9 h after TXL administration induced significant radiosensitization effects on the total cells of both tumors. Irradiation at 60 h had a more significant effect on total cells of EL4 tumor, but no significant effect on total cells of SCC VII

  14. Relativistic effects in local inertial frames including parametrized-post-Newtonian effects

    International Nuclear Information System (INIS)

    Shahid-Saless, B.; Ashby, N.

    1988-01-01

    We use the concept of a generalized Fermi frame to describe relativistic effects, due to local and distant sources of gravitation, on a body placed in a local inertial frame of reference. In particular we have considered a model of two spherically symmetric gravitating point sources, moving in circular orbits around a common barycenter where one of the bodies is chosen to be the local and the other the distant one. This has been done using the slow-motion, weak-field approximation and including four of the parametrized-post-Newtonian (PPN) parameters. The position of the classical center of mass must be modified when the PPN parameter zeta 2 is included. We show that the main relativistic effect on a local satellite is described by the Schwarzschild field of the local body and the nonlinear term corresponding to the self-interaction of the local source with itself. There are also much smaller terms that are proportional, respectively, to the product of the potentials of local and distant bodies and to the distant body's self-interactions. The spatial axes of the local frame undergo geodetic precession. In addition we have an acceleration of the order of 10/sup -11/ cm sec -2 that vanish in the case of general relativity, which is discussed in detail

  15. Assessment of ocular hypotensive effect and safety 12 months after changing from an unfixed combination to a latanoprost 0.005% + timolol maleate 0.5% fixed combination.

    Science.gov (United States)

    Inoue, Kenji; Okayama, Ryoko; Higa, Risako; Wakakura, Masato; Tomita, Goji

    2012-01-01

    Latanoprost 0.005% + timolol maleate 0.5% combined eyedrops were recently made available in Japan. We prospectively investigated the intraocular pressure (IOP)-lowering effect, visual preservation effect, and adverse reactions of a one-year administration of this fixed combination. The subjects included 162 eyes from 162 patients diagnosed with either primary open-angle glaucoma or ocular hypertension and using an unfixed combination of latanoprost 0.005% and timolol maleate 0.5%. The unfixed combination was discontinued and replaced with the latanoprost 0.005% + timolol maleate 0.5% fixed combination with no washout period. IOP was measured before (baseline) and 3, 6, 9, and 12 months after the change. The mean deviation value of Humphrey field analysis was compared. Adverse reactions were examined at every follow-up. No significant differences were found between mean IOP values obtained at baseline (mean ± standard deviation, 15.2 ± 3.3 mmHg) 3 months (15.1 ± 3.2 mmHg), 6 months (15.3 ± 3.1 mmHg), 9 months (15.3 ± 3.1 mmHg), and 12 months (15.1 ± 3.2 mmHg) after the change from the unfixed to the fixed combination of eyedrops (P = 0.212). In addition, no significant differences were observed between mean deviation values obtained at baseline (-9.11 ± 6.94 dB) and 12 months (-10.08 ± 7.24 dB) after the change (P = 0.114). Thirty-one patients discontinued the fixed combination within 12 months of replacement, due to an insufficient IOP decrease (20 patients, 12.3%) and adverse reactions (11 patients, 6.8%). Following replacement of two eyedrop medications (latanoprost 0.005% and timolol maleate 0.5%) by one fixed combination (latanoprost 0.005% + timolol maleate 0.5%), IOP and visual field were preserved. However, 20% of the patients discontinued the new treatment because of an insufficient IOP decrease and complaints of adverse reactions.

  16. The fixed-effects analysis of the relation between SDAS and carbides for the airfoil blade traces

    Directory of Open Access Journals (Sweden)

    Pietraszek J.

    2017-03-01

    Full Text Available The primary objective was to test a usefulness of the specific fixed-effect model for the analysis of quantitative relationships gathered from the image analysis of the material microstructures. The dataset was obtained from the investigation of turbine blades made from superalloy IN713C. The analysis based on the general linear model resulted in informative plots revealing mutual relationships between secondary dendrite arm spacing and the mean plane section area of carbides in the material. Directions for further research also were obtained.

  17. The macroeconomic effects of oil shocks under fixed and flexible exchange rates - a comparison

    International Nuclear Information System (INIS)

    Harvie, C.

    1993-01-01

    The objective of this paper is to explore further, from a primarily theoretical perspective, the macroeconomic implications arising for an oil-producing economy operating with either a fixed or flexible exchange rate system - to explore, in particular, which of these two extreme systems best offers insulatory properties, in the sense of reducing the volatility of adjustment of key macroeconomic variables arising primarily from oil-related shocks. The issue is explored by analyzing a theoretical framework, which emphasizes the long-run nature of the adjustment process. Such an emphasis is particularly pertinent in models which assume that economic agents possess rational expectations, where long-run equilibrium will have a major bearing upon the short-run adjustment process itself. However, due to the complexity of the model developed here, it is not possible to derive analytical unambiguous results, hence emphasis is placed upon deriving results through numerical simulation. The results derived enable an identification to be made of the importance, for policy purposes, of implementing an appropriate exchange rate system for oil producing and exporting economics with the characteristics emphasised in this paper. (3 figures). (Author)

  18. Effects of fixed functional therapy on tongue and hyoid positions and posterior airway.

    Science.gov (United States)

    Ozdemir, Fulya; Ulkur, Feyza; Nalbantgil, Didem

    2014-03-01

    To evaluate how therapy with a fixed functional appliance affects airway dimensions, dentoalveolar changes, and tongue and hyoid positions. A retrospective study was carried out on 46 pre- and posttreatment lateral cephalometric radiographs of 23 post-peak Class II patients (12 girls, 11 boys) treated with a Forsus Fatigue Resistant Device (FRD) appliance. The radiographies were taken at the start and at the end of Forsus FRD appliance therapy when a Class I or overcorrected Class I canine and molar relationship was achieved. The process took an average of 5 months 13 days ± 1 month 4 days. Skeletal and dental parameters were measured using Dolphin software, and the sagittal airway area was measured by AutoCAD software. Analyses of the pre- and posttreatment means revealed that there was no statistically significant skeletal correction of the sagittal malocclusion; increase of lower incisor inclination, decrease of upper incisor inclination, decrease of interincisal angle, and rotation of occlusal plane all contributed to the reduction of overjet. The tongue area and intermaxillary space area increased in response to these dentoalveolar changes; however, there was no statistically significant change in the hyoid position or the oropharyngeal area between the two time points. The dentoalveolar changes produced by Forsus FRD appliance did not cause any significant posterior airway changes in young adult patients.

  19. ORGANOPROTECTIVE EFFECTS OF THE FIXED COMBINATION OF ANGIOTENSIN-CONVERTING ENZYME INHIBITOR LISINOPRIL AND DIURETIC HYDROCHLOROTHIAZIDE

    Directory of Open Access Journals (Sweden)

    E. A. Ryabikhin

    2016-01-01

    Full Text Available Aim. To compare the antihypertensive and metabolic effects of combined therapy (carvedilol reception and «School of the hypertensive patient» with these of the carvedilol monotherapy in young patients with arterial hypertension (HT of 1-2 degrees with overweight and obesity.Material and methods. 63 out-patients with HT of 1-2 degrees (aged 18-27 y.o. with overweight and obesity were included in the open parallel randomized clinical preventive trail. Patients wеre randomized into 2 groups. All hypertensive patients received the carvedilol (Vedicardol, Sintez, Russia 25 mg daily. Carvedilol dose was enlarged twice in case of insufficient antihypertensive effect. Patients of the main group (n=32 also passed through the special educational program «School for hypertensive patients». Changes in blood pressure (BP level, body mass index, biochemical markers and risk factors were evaluated initially and in 24 weeks of therapy.Results. Patients of the main group had more significant risk factor manifestations decrease than in group of comparison. More significant body mass index decrease was also observed in the main group in comparison with group of comparison: from 32,5±0,4 to 26,4±0,7 kg/m2 (p<0,01 and from 31,8±0,8 to 28,9±1,18 kg/m2 (p<0,05, respectively. In patients of the main group systolic and diastolic BP decreased by 20,1% and 25,6%, respectively, wile in patients of the group of comparison – by 18,9% and 26%, respectively.Conclusion. It is reasonable to combine carvedilol therapy with special training in the young hypertensive patients with overweight and obesity.

  20. ORGANOPROTECTIVE EFFECTS OF THE FIXED COMBINATION OF ANGIOTENSIN-CONVERTING ENZYME INHIBITOR LISINOPRIL AND DIURETIC HYDROCHLOROTHIAZIDE

    Directory of Open Access Journals (Sweden)

    E. A. Ryabikhin

    2009-01-01

    Full Text Available Aim. To compare the antihypertensive and metabolic effects of combined therapy (carvedilol reception and «School of the hypertensive patient» with these of the carvedilol monotherapy in young patients with arterial hypertension (HT of 1-2 degrees with overweight and obesity.Material and methods. 63 out-patients with HT of 1-2 degrees (aged 18-27 y.o. with overweight and obesity were included in the open parallel randomized clinical preventive trail. Patients wеre randomized into 2 groups. All hypertensive patients received the carvedilol (Vedicardol, Sintez, Russia 25 mg daily. Carvedilol dose was enlarged twice in case of insufficient antihypertensive effect. Patients of the main group (n=32 also passed through the special educational program «School for hypertensive patients». Changes in blood pressure (BP level, body mass index, biochemical markers and risk factors were evaluated initially and in 24 weeks of therapy.Results. Patients of the main group had more significant risk factor manifestations decrease than in group of comparison. More significant body mass index decrease was also observed in the main group in comparison with group of comparison: from 32,5±0,4 to 26,4±0,7 kg/m2 (p<0,01 and from 31,8±0,8 to 28,9±1,18 kg/m2 (p<0,05, respectively. In patients of the main group systolic and diastolic BP decreased by 20,1% and 25,6%, respectively, wile in patients of the group of comparison – by 18,9% and 26%, respectively.Conclusion. It is reasonable to combine carvedilol therapy with special training in the young hypertensive patients with overweight and obesity.

  1. Field effect of fixed negative charges on oxidized silicon induced by AlF3 layers with fluorine deficiency

    International Nuclear Information System (INIS)

    Koenig, D.; Zahn, D.R.T.; Ebest, G.

    2004-01-01

    We recently discovered that in an AlF 3 /SiO 2 /Si structure extrinsic electrons are trapped at fluorine (F) vacancies in AlF 3 at the interface with SiO 2 , generating a high sheet density of fixed negative charges. p- and n-Type Si substrates were oxidized using rapid thermal oxidation (RTO) or furnace oxidation (th); some samples were passivated in hydrogen (H 2 ). AlF 3 was deposited onto oxidized Si wafers by a modified PVD process, leading to a F deficiency (AlF x ). Samples were characterized by mercury probe (Hg) CV and microwave photo conduction decay (μW-PCD), determining charge and trap densities and effective carrier lifetime τ eff , respectively. An effective charge density of up to |Q eff = -6.9 x 10 12 cm -2 is reached due to electrons tunneling from Si into AlF 3 , occupying F vacancies. Lifetime scans of p-type float zone (FZ) Si samples with 1.5 nm RTO and 20 nm AlF 3 show an increase in effective minority carrier lifetime by a factor of 8.4 compared to samples with 1.5 nm RTO only. The fixed negative charge density increases with exposure time to sunlight or at simulated ageing by a 24 h anneal at 200 deg. C in air

  2. Working with a fixed operating room team on consecutive similar cases and the effect on case duration and turnover time.

    Science.gov (United States)

    Stepaniak, Pieter S; Vrijland, Wietske W; de Quelerij, Marcel; de Vries, Guus; Heij, Christiaan

    2010-12-01

    If variation in procedure times could be controlled or better predicted, the cost of surgeries could be reduced through improved scheduling of surgical resources. This study on the impact of similar consecutive cases on the turnover, surgical, and procedure times tests the perception that repeating the same manual tasks reduces the duration of these tasks. We hypothesize that when a fixed team works on similar consecutive cases the result will be shorter turnover and procedure duration as well as less variation as compared with the situation without a fixed team. Case-control study. St Franciscus Hospital, a large general teaching hospital in Rotterdam, the Netherlands. Two procedures, inguinal hernia repair and laparoscopic cholecystectomy, were selected and divided across a control group and a study group. Patients were randomly assigned to the study or control group. Preparation time, surgical time, procedure time, and turnover time. For inguinal hernia repair, we found a significantly lower preparation time and 10 minutes less procedure time in the study group, as compared with the control group. Variation in the study group was lower, as compared with the control group. For laparoscopic cholecystectomy, preparation time was significantly lower in the study group, as compared with the control group. For both procedures, there was a significant decrease in turnover time. Scheduling similar consecutive cases and performing with a fixed team results in lower turnover times and preparation times. The procedure time of the inguinal hernia repair decreased significantly and has practical scheduling implications. For more complex surgery, like laparoscopic cholecystectomy, there is no effect on procedure time.

  3. Efficacy of a numerical value of a fixed-effect estimator in stochastic frontier analysis as an indicator of hospital production structure

    Directory of Open Access Journals (Sweden)

    Kawaguchi Hiroyuki

    2012-09-01

    Full Text Available Abstract Background The casemix-based payment system has been adopted in many countries, although it often needs complementary adjustment taking account of each hospital’s unique production structure such as teaching and research duties, and non-profit motives. It has been challenging to numerically evaluate the impact of such structural heterogeneity on production, separately of production inefficiency. The current study adopted stochastic frontier analysis and proposed a method to assess unique components of hospital production structures using a fixed-effect variable. Methods There were two stages of analyses in this study. In the first stage, we estimated the efficiency score from the hospital production function using a true fixed-effect model (TFEM in stochastic frontier analysis. The use of a TFEM allowed us to differentiate the unobserved heterogeneity of individual hospitals as hospital-specific fixed effects. In the second stage, we regressed the obtained fixed-effect variable for structural components of hospitals to test whether the variable was explicitly related to the characteristics and local disadvantages of the hospitals. Results In the first analysis, the estimated efficiency score was approximately 0.6. The mean value of the fixed-effect estimator was 0.784, the standard deviation was 0.137, the range was between 0.437 and 1.212. The second-stage regression confirmed that the value of the fixed effect was significantly correlated with advanced technology and local conditions of the sample hospitals. Conclusion The obtained fixed-effect estimator may reflect hospitals’ unique structures of production, considering production inefficiency. The values of fixed-effect estimators can be used as evaluation tools to improve fairness in the reimbursement system for various functions of hospitals based on casemix classification.

  4. Stress effect on conception rate in Nellore cows submmited to fixed time artificial insemination. Preliminary results

    Directory of Open Access Journals (Sweden)

    Fábio Luis Nogueira Natal

    2013-12-01

    Full Text Available In beef cattle, fixed time artificial insemination (FTAI provides a method to inseminate large numbers of females in a specific time, which result in economical gains due, among others, to a more uniform calf crop. However, FTAI requires frequent manipulation of animals in order to inject hormones and for clinical examination. Consequently, animals seemed stressed in less or higher extent at the time of insemination. This can be a problem because it has been demonstrated that application of an acute stress treatment (electric shock, confinement, restraint and rotation twice a day during the follicular phase of the oestrous cycle prevents the pre-ovulatory LH surge. This study aimed to evaluate if FTAI efficiency of Nellore cows is affected by the degree of stress observed at time of AI. Nellore cows (n=92 were treated (Day 0 with a progesterone intravaginal devise (Primer®, Tecnopec, São Paulo, Brazil containing 1 g of progesterone and injected with estradiol benzoate (2mg EB, Estrogin, AUSA, Brazil. Primer was removed on Day 8 (08:00 AM and administered one injection of cloprostenol (125 mcg, Prolise®, Tecnopec, São Paulo, Brazil. Twenty-four hours later, cows received 2 mg EB and insemination (semen from one sire was done on the afternoon (14:00 to 16:00 PM of day 10. At time of FTAI, the stress condition was classified as 1 (low, 2 (moderate or 3 (high according the reactivity of cows to enter in the squeeze chute and apparent nervous behavior. Pregnancy status was evaluated by transrectal ultrasound on day 40 after FTAI. Data were analyzed by Chi-square test. Cows with moderate or high degree of stress had lower conception rate than low stressed cows (P<0.01. These results suggest that cow temperament must be considered in the planning of FTAI programs. Studies are in progress in order to measure hormonal parameters (cortisol and Alpha amylase that better reflects the “fight-or-flight” response to immediate stressors in order to

  5. Retirement and mental health: does social participation mitigate the association? A fixed-effects longitudinal analysis

    Directory of Open Access Journals (Sweden)

    Koichiro Shiba

    2017-05-01

    Full Text Available Abstract Background Empirical evidence investigating heterogeneous impact of retirement on mental health depending on social backgrounds is lacking, especially among older adults. Methods We examined the impact of changes in working status on changes in mental health using Japanese community-dwelling adults aged ≥65 years participating in the Japan Gerontological Evaluation Study between 2010 and 2013 (N = 62,438. Between-waves changes in working status (“Kept working”, “Retired”, “Started work”, or “Continuously retired” were used to predict changes in depressive symptoms measured by the Geriatric Depression Scale. First-difference regression models were stratified by gender, controlling for changes in time-varying confounding actors including equivalised household income, marital status, instrumental activities of daily living, incidence of serious illnesses and family caregiving. We then examined the interactions between changes in working status and occupational class, changes in marital status, and post-retirement social participation. Results Participants who transitioned to retirement reported significantly increased depressive symptoms (β = 0.33, 95% CI: 0.21–0.45 for men, and β = 0.29, 95% CI: 0.13–0.45 for women compared to those who kept working. Men who were continuously retired reported increased depressive symptoms (β = 0.13, 95% CI: 0.05–0.20, whereas males who started work reported decreased depressive symptoms (β = −0.20, 95% CI: -0.38–-0.02. Men from lower occupational class (compared to men from higher class reported more increase in depressive symptoms when continuously retired (β = −0.16, 95% CI: -0.25–-0.08. Those reporting recreational social participation after retirement appeared to be less influenced by transition to retirement. Conclusions Retirement may increase depressive symptoms among Japanese older adults, particularly men from lower occupational class backgrounds

  6. Change in carrier type in high-k gate carbon nanotube field-effect transistors by interface fixed charges

    International Nuclear Information System (INIS)

    Moriyama, N; Ohno, Y; Kitamura, T; Kishimoto, S; Mizutani, T

    2010-01-01

    We study the phenomenon of change in carrier type in carbon nanotube field-effect transistors (CNFETs) caused by the atomic layer deposition (ALD) of a HfO 2 gate insulator. When a HfO 2 layer is deposited on a CNFET, the type of carrier changes from p-type to n-type. The so-obtained n-type device has good performance and stability in air. The conductivity of such a device with a channel length of 0.7 μm is 11% of the quantum conductance 4e 2 /h. The contact resistance for electron current is estimated to be 14 kΩ. The n-type conduction of this CNFET is maintained for more than 100 days. The change in carrier type is attributed to positive fixed charges introduced at the interface between the HfO 2 and SiO 2 layers. We also propose a novel technique to control the type of conduction by utilizing interface fixed charges; this technique is compatible with Si CMOS process technology.

  7. Do Generous Unemployment Benefit Programs Reduce Suicide Rates? A State Fixed-Effect Analysis Covering 1968–2008

    Science.gov (United States)

    Cylus, Jonathan; Glymour, M. Maria; Avendano, Mauricio

    2014-01-01

    The recent economic recession has led to increases in suicide, but whether US state unemployment insurance programs ameliorate this association has not been examined. Exploiting US state variations in the generosity of benefit programs between 1968 and 2008, we tested the hypothesis that more generous unemployment benefit programs reduce the impact of economic downturns on suicide. Using state linear fixed-effect models, we found a negative additive interaction between unemployment rates and benefits among the US working-age (20–64 years) population (β = −0.57, 95% confidence interval: −0.86, −0.27; P unemployment rates on suicide is offset by the presence of generous state unemployment benefit programs, though estimated effects are small in magnitude. PMID:24939978

  8. Do generous unemployment benefit programs reduce suicide rates? A state fixed-effect analysis covering 1968-2008.

    Science.gov (United States)

    Cylus, Jonathan; Glymour, M Maria; Avendano, Mauricio

    2014-07-01

    The recent economic recession has led to increases in suicide, but whether US state unemployment insurance programs ameliorate this association has not been examined. Exploiting US state variations in the generosity of benefit programs between 1968 and 2008, we tested the hypothesis that more generous unemployment benefit programs reduce the impact of economic downturns on suicide. Using state linear fixed-effect models, we found a negative additive interaction between unemployment rates and benefits among the US working-age (20-64 years) population (β = -0.57, 95% confidence interval: -0.86, -0.27; P unemployment rates on suicide is offset by the presence of generous state unemployment benefit programs, though estimated effects are small in magnitude. © The Author 2014. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  9. Precise prediction for the light MSSM Higgs-boson mass combining effective field theory and fixed-order calculations

    Energy Technology Data Exchange (ETDEWEB)

    Bahl, Henning; Hollik, Wolfgang [Max-Planck-Institut fuer Physik (Werner-Heisenberg-Institut), Munich (Germany)

    2016-09-15

    In the Minimal Supersymmetric Standard Model heavy superparticles introduce large logarithms in the calculation of the lightest CP-even Higgs-boson mass. These logarithmic contributions can be resummed using effective field theory techniques. For light superparticles, however, fixed-order calculations are expected to be more accurate. To gain a precise prediction also for intermediate mass scales, the two approaches have to be combined. Here, we report on an improvement of this method in various steps: the inclusion of electroweak contributions, of separate electroweakino and gluino thresholds, as well as resummation at the NNLL level. These improvements can lead to significant numerical effects. In most cases, the lightest CP-even Higgs-boson mass is shifted downwards by about 1 GeV. This is mainly caused by higher-order corrections to the MS top-quark mass. We also describe the implementation of the new contributions in the code FeynHiggs. (orig.)

  10. The effects of arbuscular mycorrhizal fungus and free living nitrogen fixing bacteria on growth, photosynthesis and yield of corn

    Directory of Open Access Journals (Sweden)

    mohsen jahan

    2009-06-01

    Full Text Available In recent years, biological fertilizers have received special attention by scientists in sustainable and low input agriculture. In order to study the effects of arbuscular mycorrhizal fungi and free living nitrogen fixing bacteria on growth and photosynthesis characteristics of corn in conventional and ecological cropping systems, a field experiment was conducted at the Research Farm of Ferdowsi University of Mashhad during year 2006. A split plots arrangement based on randomized complete block design with three replications was used. Treatments consisted four cropping systems (1- High input conventional system, 2- Medium input conventional system, 3- Low input conventional system and 4- Ecological system and four inoculations (1- Mycorrhiza fungus, Glomus intraradices, 2- Bacteria, Azotobacter paspali and Azospirillum brasilense, 3- Dual inoculation, Fungus plus bacteria, and 4- No-inoculation, control, which were allocated to main plots and sub plots, respectively. All agronomic practices and inputs application during planting and nursing for each of cropping systems were conducted according to regional traditions. Results showed that the effect of inoculation on photosynthesis rates of corn was significant, as the highest photosynthesis rate obtained in dual inoculation. Single inoculation (fungus or bacteria was ranked second. The effect of all inoculations on corn dry matter production was significant and dual inoculation produced the highest dry matter yield. The cropping systems have significant effect on corn yield and the difference between medium input conventional system and high input conventional system was significant, but the high input, low input and ecological cropping systems showed no differences. Inoculants affected the SPAD readings, and dual inoculation showed the highest SPAD readings. This study showed that utilization of low input conventional and ecological systems in combination with use of dual inoculation of

  11. Income inequality, life expectancy and cause-specific mortality in 43 European countries, 1987-2008: a fixed effects study.

    Science.gov (United States)

    Hu, Yannan; van Lenthe, Frank J; Mackenbach, Johan P

    2015-08-01

    Whether income inequality is related to population health is still open to debate. We aimed to critically assess the relationship between income inequality and mortality in 43 European countries using comparable data between 1987 and 2008, controlling for time-invariant and time-variant country-level confounding factors. Annual data on income inequality, expressed as Gini index based on net household income, were extracted from the Standardizing the World Income Inequality Database. Data on life expectancy at birth and age-standardized mortality by cause of death were obtained from the Human Lifetable Database and the World Health Organization European Health for All Database. Data on infant mortality were obtained from the United Nations World Population Prospects Database. The relationships between income inequality and mortality indicators were studied using country fixed effects models, adjusted for time trends and country characteristics. Significant associations between income inequality and many mortality indicators were found in pooled cross-sectional regressions, indicating higher mortality in countries with larger income inequalities. Once the country fixed effects were added, all associations between income inequality and mortality indicators became insignificant, except for mortality from external causes and homicide among men, and cancers among women. The significant results for homicide and cancers disappeared after further adjustment for indicators of democracy, education, transition to national independence, armed conflicts, and economic freedom. Cross-sectional associations between income inequality and mortality seem to reflect the confounding effects of other country characteristics. In a European context, national levels of income inequality do not have an independent effect on mortality.

  12. The Effect Of Customer Demand And Supplier Performance In Competitive Strategy And Business Performance Case Of Fixed Broadband In Indonesia

    Directory of Open Access Journals (Sweden)

    Rina D. Pasaribu

    2015-08-01

    Full Text Available Broadband telecommunication is significantly important to support and improve countrys competitiveness level. However Indonesia performance especially in Fixed Broadband is poor as the penetration rate is very low and far behind from other ASEAN countries. The industry is served by multi operators with one dominant operator. This dominant operator will be studied representing the industry in this study. A qualitative study Pasaribu et al. 2015 related to this paper has found that poor fulfillment of Customer Demand and poor Supplier Performance are two dominant external factors that cause the low performance. A model is proposed to frame the work it consists of four variables Customer Demand Supplier Performance Competitive Strategy and Business Performance. This study aims is use that Pasaribu et al. model directly to business units level to identify and analyze the relationships within the model and significance level of each relationship accordingly. By understanding the priority levels the improvement program could be more effectively planned and implemented. This study is expected to contribute on Fixed Broadband research wich is still very rare especially in Indonesia The research methodology is quantitative methods using survey technique. The respondents are management and customers of the dominant operator business units. Clustering by province regions gave 32 samples from the population of 58 business units. Partial Least Square modelling was used to analise the datas. The main result of this study is that the most significant relationship in the model is Supplier Performance to Competitive Strategy. Furthermore from indicators of Supplier Performance it was found that Quality Relationship has a very high effect among other indicators. By prioritizing these significant constructs it could be expected the related improvement program could be more effective.

  13. Effect of neem cake/fertilizers on symbiotic and non-symbiotic N2 fixing bacteria

    International Nuclear Information System (INIS)

    Akhtar, S.; Solangi, A.H.; Gilani, G.; Pirzada, M.H.

    2002-01-01

    Neem cake amendment in soil at 1.3% no adverse effect on the population of four symbiotic Rhizobium species viz., japonicum, R. leguminosarum, R. Phaseoli and R. Fredii and three non-symbiotic free living nitrogen fixers bacteria viz., Pseudomonas diazotrophicus, Klebsiella planticola and Enterobacter cloacae. Neem cake extracted with n-hexane stimulated the growth of Rhizobium species in vitro, whereas Neem cake expeller extracted neither inhibited nor stimulated the growth of Rhizobium species except for R. Fredii, whose was slightly retarded. The fertilizers (urea, NPK and DAP) had no adverse effect on these bacteria even at the dosage ten times higher the recommended dose. (author)

  14. Interest Rate Fluctuation Effect on Commercial Bank's Fixed Fund Deposit in Nigeria

    OpenAIRE

    Okolo Chimaobi Valentine

    2015-01-01

    Commercial banks in Nigeria adopted many strategies to attract fresh deposits including the use of high deposit rate. However, pricing of banking services moved in favor of the banks at the expense of customers, resulting in their seeking other investment alternatives rather than saving their money in the bank. Both deposit and lending rates were greatly influenced by the Central Bank of Nigeria (CBN) decision on interest rate. Therefore, commercial bank effort to attract...

  15. The long-term effectiveness of generic adult fixed-dose combination ...

    African Journals Online (AJOL)

    Background: Access to pediatric antiretroviral formulations is increasing in resource-limited countries, however adult FDCs are still commonly used by antiretroviral therapy (ART) programs. Objective: To describe long-term effectiveness of using adult FDC of d4T+3TC+NVP (Triomune) in children for HIV treatment. Methods: ...

  16. Testing the macroeconomic impact of the budget deficit in EU Member States using linear regression with fixed effects

    Directory of Open Access Journals (Sweden)

    Dalian Marius DORAN

    2017-11-01

    Full Text Available The article aims to research impact of budget balance, whether surplus or deficit, on the main indicator characterizing the economic growth of a country, namely GDP and the inflation rate in the 27 European Union Member States and the United Kingdom. For this analysis was used panel data, taking into account the period from 2001 to 2015. The method used for the analysis is the linear regression with fixed effects and with Driscoll-Kraay standard errors. The dependent variables are the growth rate of real GDP and the inflation rate, and the independent variable is the budget balance (surplus or deficit. The results obtained after using econometric software Stata shows a positive impact of budget balance on growth in the European Union for the analyzed period.

  17. Cost-effective solar furnace system using fixed geometry Non-Imaging Focusing Heliostat and secondary parabolic concentrator

    Energy Technology Data Exchange (ETDEWEB)

    Chong, K.K.; Lim, C.Y.; Hiew, C.W. [Faculty of Engineering and Science, Universiti Tunku Abdul Rahman, Off Jalan Genting Kelang, Setapak, Kuala Lumpur 53300 (Malaysia)

    2011-05-15

    A novel cost-effective solar furnace system is proposed to be consisted of a Non-Imaging Focusing Heliostat (NIFH) and a much smaller parabolic concentrator. In order to simplify the design and hence leading to the cost reduction, a fixed geometry of the NIFH heliostat is adopted in the novel solar furnace system by omitting the requirement of continuous astigmatic correction throughout the year with the use of local controllers. The performance of this novel solar furnace configuration can be optimized when the heliostat's spinning-axis is orientated in such a way that the annual variations of incident angle and therefore the annual variations of aberrant image size are the least. To verify the new configuration, a prototype solar furnace has been constructed at Universiti Tunku Abdul Rahman. (author)

  18. Educational expansion and inequalities in mortality-A fixed-effects analysis using longitudinal data from 18 European populations.

    Directory of Open Access Journals (Sweden)

    Olof Östergren

    Full Text Available The aim of this paper is to empirically evaluate whether widening educational inequalities in mortality are related to the substantive shifts that have occurred in the educational distribution.Data on education and mortality from 18 European populations across several decades were collected and harmonized as part of the Demetriq project. Using a fixed-effects approach to account for time trends and national variation in mortality, we formally test whether the magnitude of relative inequalities in mortality by education is associated with the gender and age-group specific proportion of high and low educated respectively.The results suggest that in populations with larger proportions of high educated and smaller proportions of low educated, the excess mortality among intermediate and low educated is larger, all other things being equal.We conclude that the widening educational inequalities in mortality being observed in recent decades may in part be attributed to educational expansion.

  19. Improvement of prediction ability for genomic selection of dairy cattle by including dominance effects.

    Directory of Open Access Journals (Sweden)

    Chuanyu Sun

    Full Text Available Dominance may be an important source of non-additive genetic variance for many traits of dairy cattle. However, nearly all prediction models for dairy cattle have included only additive effects because of the limited number of cows with both genotypes and phenotypes. The role of dominance in the Holstein and Jersey breeds was investigated for eight traits: milk, fat, and protein yields; productive life; daughter pregnancy rate; somatic cell score; fat percent and protein percent. Additive and dominance variance components were estimated and then used to estimate additive and dominance effects of single nucleotide polymorphisms (SNPs. The predictive abilities of three models with both additive and dominance effects and a model with additive effects only were assessed using ten-fold cross-validation. One procedure estimated dominance values, and another estimated dominance deviations; calculation of the dominance relationship matrix was different for the two methods. The third approach enlarged the dataset by including cows with genotype probabilities derived using genotyped ancestors. For yield traits, dominance variance accounted for 5 and 7% of total variance for Holsteins and Jerseys, respectively; using dominance deviations resulted in smaller dominance and larger additive variance estimates. For non-yield traits, dominance variances were very small for both breeds. For yield traits, including additive and dominance effects fit the data better than including only additive effects; average correlations between estimated genetic effects and phenotypes showed that prediction accuracy increased when both effects rather than just additive effects were included. No corresponding gains in prediction ability were found for non-yield traits. Including cows with derived genotype probabilities from genotyped ancestors did not improve prediction accuracy. The largest additive effects were located on chromosome 14 near DGAT1 for yield traits for both

  20. Evaluation of the Effects of Bio Fertilizers Containing non Symbiotic Nitrogen Fixing and Phosphate Solubilizing Bacteria on Quantitative and Qualitative Traits of Wheat

    Directory of Open Access Journals (Sweden)

    M Mohtadi

    2016-02-01

    Full Text Available Introduction Wheat crop plays an important role in food security in a country such as Iran. Therefore, serious attention has been paid to ecological farming systems and sustainable management of wheat. For this purpose extensive efforts is done to find proper strategies to improve the quality of soil, agricultural products and started removal pollutants. One of the factors to achieve sustainable agriculture is to use natural agents such as biofertilizers. Several mechanisms are proposed to explain how effective plant growth promoting rhizobacteria is for growth and development of plants. These mechanisms include two groups, direct and indirect in general. Indirect mechanism is to increase absorption and availability of the nutrient elements soluble, producing plant growth regulators, siderophore production of iron chelator, and the phosphate soluble. Through indirect mechanisms such as antagonistic relation, PGPRs moderate the harmful effects of of plant pathogens and thereby lead to increase plant growth. The main goal of this study was to investigate the effect of biofertilizers containing non-symbiotic nitrogen fixing and phosphate solubilizing bacteria on quantitative and qualitative traits of wheat. Materials and Methods This Experiment was conducted in the research farm of Baykola agricultural research stations affiliated by agriculture and natural resources research center of Mazandaran during 2011-12 cropping season. In order to determine physical and chemical properties of the soil samples were taken from the depth of 0-30 cm,. Experimental design was split plots arrangement based on randomized complete block design with three replications. In this experiment chemical fertilizer was assumed as the main plot in 3 levels include: 1- noconsumption (C0, 2- equivalent to 50% of the fertilizer recommendations (C1, 3- equivalent to 100% of the fertilizer recommendations(C2 and two types of biological fertilizers was applied in the sub plot in

  1. Effects of metal surface grinding at the porcelain try-in stage of fixed dental prostheses.

    Science.gov (United States)

    Kılınç, Halil İbrahim; Kesim, Bülent; Gümüş, Hasan Önder; Dinçel, Mehmet; Erkaya, Selçuk

    2014-08-01

    This study was to evaluate the effect of grinding of the inner metal surface during the porcelain try-in stage on metal-porcelain bonding considering the maximum temperature and the vibration of samples. Ninety-one square prism-shaped (1 × 1 × 1.5 mm) nickel-chrome cast frameworks 0.3 mm thick were prepared. Porcelain was applied on two opposite outer axial surfaces of the frameworks. The grinding was performed from the opposite axial sides of the inner metal surfaces with a low-speed handpiece with two types of burs (diamond, tungsten-carbide) under three grinding forces (3.5 N, 7 N, 14 N) and at two durations (5 seconds, 10 seconds). The shear bond strength (SBS) test was performed with universal testing machine. Statistical analyzes were performed at 5% significance level. The samples subjected to grinding under 3.5 N showed higher SBS values than those exposed to grinding under 7 N and 14 N (P.05). The types of bur (P=.965) and the duration (P=.679) did not affect the SBS values. On the other hand, type of bur, force applied, and duration of the grinding affected the maximum temperatures of the samples, whereas the maximum vibration was affected only by the type of bur (PGrinding the inner metal surface did not affect the metal-porcelain bond strength. Although the grinding affected the maximum temperature and the vibration values of the samples, these did not influence the bonding strength.

  2. Second-order schedules of token reinforcement with pigeons: effects of fixed- and variable-ratio exchange schedules.

    Science.gov (United States)

    Foster, T A; Hackenberg, T D; Vaidya, M

    2001-09-01

    Pigeons' key pecks produced food under second-order schedules of token reinforcement, with light-emitting diodes serving as token reinforcers. In Experiment 1, tokens were earned according to a fixed-ratio 50 schedule and were exchanged for food according to either fixed-ratio or variable-ratio exchange schedules, with schedule type varied across conditions. In Experiment 2, schedule type was varied within sessions using a multiple schedule. In one component, tokens were earned according to a fixed-ratio 50 schedule and exchanged according to a variable-ratio schedule. In the other component, tokens were earned according to a variable-ratio 50 schedule and exchanged according to a fixed-ratio schedule. In both experiments, the number of responses per exchange was varied parametrically across conditions, ranging from 50 to 400 responses. Response rates decreased systematically with increases in the fixed-ratio exchange schedules, but were much less affected by changes in the variable-ratio exchange schedules. Response rates were consistently higher under variable-ratio exchange schedules than tinder comparable fixed-ratio exchange schedules, especially at higher exchange ratios. These response-rate differences were due both to greater pre-ratio pausing and to lower local rates tinder the fixed-ratio exchange schedules. Local response rates increased with proximity to food under the higher fixed-ratio exchange schedules, indicative of discriminative control by the tokens.

  3. Situational effects of the school factors included in the dynamic model of educational effectiveness

    NARCIS (Netherlands)

    Creerners, Bert; Kyriakides, Leonidas

    We present results of a longitudinal study in which 50 schools, 113 classes and 2,542 Cypriot primary students participated. We tested the validity of the dynamic model of educational effectiveness and especially its assumption that the impact of school factors depends on the current situation of

  4. Self-paced versus fixed speed walking and the effect of virtual reality in children with cerebral palsy.

    Science.gov (United States)

    Sloot, Lizeth H; Harlaar, Jaap; van der Krogt, Marjolein M

    2015-10-01

    While feedback-controlled treadmills with a virtual reality could potentially offer advantages for clinical gait analysis and training, the effect of self-paced walking and the virtual environment on the gait pattern of children and different patient groups remains unknown. This study examined the effect of self-paced (SP) versus fixed speed (FS) walking and of walking with and without a virtual reality (VR) in 11 typically developing (TD) children and nine children with cerebral palsy (CP). We found that subjects walked in SP mode with twice as much between-stride walking speed variability (pinteraction effects between SP and group (TD versus CP) were found for five out of 33 parameters. This suggests that children with CP might need more time to familiarize to SP walking, however, these differences were generally too small to be clinically relevant. The VR environment did not affect the kinematic or kinetic parameters, but walking with VR was rated as more similar to overground walking by both groups (p=0.02). The results of this study indicate that both SP and FS walking, with and without VR, can be used interchangeably for treadmill-based clinical gait analysis in children with and without CP. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Modeling of Temperature-Dependent Noise in Silicon Nanowire FETs including Self-Heating Effects

    Directory of Open Access Journals (Sweden)

    P. Anandan

    2014-01-01

    Full Text Available Silicon nanowires are leading the CMOS era towards the downsizing limit and its nature will be effectively suppress the short channel effects. Accurate modeling of thermal noise in nanowires is crucial for RF applications of nano-CMOS emerging technologies. In this work, a perfect temperature-dependent model for silicon nanowires including the self-heating effects has been derived and its effects on device parameters have been observed. The power spectral density as a function of thermal resistance shows significant improvement as the channel length decreases. The effects of thermal noise including self-heating of the device are explored. Moreover, significant reduction in noise with respect to channel thermal resistance, gate length, and biasing is analyzed.

  6. The Effect on Treatment Adherence of Administering Drugs as Fixed-Dose Combinations versus as Separate Pills: Systematic Review and Meta-Analysis.

    Science.gov (United States)

    van Galen, Katy A; Nellen, Jeannine F; Nieuwkerk, Pythia T

    2014-01-01

    Administering drugs as fixed-dose combinations (FDCs) versus the same active drugs administered as separate pills is assumed to enhance treatment adherence. We synthesized evidence from randomized controlled trials (RCTs) about the effect of FDCs versus separate pills on adherence. We searched PubMed for RCTs comparing a FDC with the same active drugs administered as separate pills, including a quantitative estimate of treatment adherence, without restriction to medical condition. The odds ratio (OR) of optimal adherence with FDCs versus separate pills was used as common effect size and aggregated into a pooled effect estimate using a random effect model with inverse variance weights. Out of 1258 articles screened, only six studies fulfilled inclusion criteria. Across medical conditions, administering drugs as FDC significantly increased the likelihood of optimal adherence (OR 1.33 (95% CI, 1.03-1.71)). Within subgroups of specific medical conditions, the favourable effect of FDCs on adherence was of borderline statistical significance for HIV infection only (OR 1.46 (95% CI, 1.00-2.13)). We observed a remarkable paucity of RCTs comparing the effect on adherence of administering drugs as FDC versus as separate pills. Administering drugs as FDC improved medication adherence. However, this conclusion is based on a limited number of RCTs only.

  7. National Radiological Fixed Lab Data

    Data.gov (United States)

    U.S. Environmental Protection Agency — The National Radiological Fixed Laboratory Data Asset includes data produced in support of various clients such as other EPA offices, EPA Regional programs, DOE,...

  8. Effectiveness of comprehensive fixed appliance treatment used with the Forsus Fatigue Resistant Device in Class II patients.

    Science.gov (United States)

    Franchi, Lorenzo; Alvetro, Lisa; Giuntini, Veronica; Masucci, Caterina; Defraia, Efisio; Baccetti, Tiziano

    2011-07-01

    To assess the dental, skeletal, and soft tissue effects of comprehensive fixed appliance treatment combined with the Forsus Fatigue Resistant Device (FRD) in Class II patients. Thirty-two Class II patients (mean age 12.7 ± 1.2 years) were treated consecutively with the FRD protocol and compared with a matched sample of 27 untreated Class II subjects (mean age 12.8 ± 1.3 years). Lateral cephalograms were taken before therapy and at the completion of comprehensive therapy. The mean duration of comprehensive treatment was 2.4 ± 0.4 years. Statistical comparisons were carried out with the Student's t-test (P < .05). The success rate was 87.5%. The FRD group showed a significant restraint in the sagittal skeletal position of the maxilla (also at the soft tissue level), a significant increase in mandibular length, and a significant improvement in maxillo-mandibular sagittal skeletal relationships. The treated group exhibited a significant reduction in overjet and a significant increase in molar relationship. The lower incisors were significantly proclined and intruded, while the lower first molars moved significantly in a mesial and vertical direction. The FRD protocol is effective in correcting Class II malocclusion with a combination of skeletal (mainly maxillary) and dentoalveolar (mainly mandibular) modifications.

  9. The role of social support in protecting mental health when employed and unemployed: A longitudinal fixed-effects analysis using 12 annual waves of the HILDA cohort.

    Science.gov (United States)

    Milner, Allison; Krnjacki, Lauren; Butterworth, Peter; LaMontagne, Anthony D

    2016-03-01

    Perceived social support is associated with overall better mental health. There is also evidence that unemployed workers with higher social support cope better psychologically than those without such support. However, there has been limited research about the effect of social support among people who have experienced both unemployment and employment. We assessed this topic using 12 years of annually collected cohort data. The sample included 3190 people who had experienced both unemployment and employment. We used longitudinal fixed-effects modelling to investigate within-person changes in mental health comparing the role of social support when a person was unemployed to when they were employed. Compared to when a person reported low social support, a change to medium (6.35, 95% 5.66 to 7.04, p social support (11.58, 95%, 95% CI 10.81 to 12.36, p health (measured on an 100 point scale, with higher scores representing better mental health). When a person was unemployed but had high levels of social support, their mental health was 2.89 points (95% CI 1.67 to 4.11, p social support. The buffering effect of social support was confirmed in stratified analysis. There was a strong direct effect of social support on mental health. The magnitude of these differences could be considered clinically meaningful. Our results also suggest that social support has a significant buffering effect on mental health when a person is unemployed. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Comparison of Ocular Pulse Amplitude Lowering Effects of Preservative-Free Tafluprost and Preservative-Free Dorzolamide-Timolol Fixed Combination Eyedrops.

    Science.gov (United States)

    Seo, Du Ri; Ha, Seung Joo

    2015-01-01

    To compare the ocular pulse amplitude (OPA) lowering effects of preservative-free tafluprost and dorzolamide-timolol fixed combination (DTFC) using dynamic contour tonometry. In total, 66 eyes of 66 patients with normal tension glaucoma (NTG) (n = 34) or primary open angle glaucoma (POAG) (n = 32) were included. Patients were divided into two groups: the preservative-free tafluprost-treated group (n = 33) and the preservative-free DTFC-treated group (n = 33). Intraocular pressure (IOP) was measured using Goldmann applanation tonometry (GAT). OPA was measured using dynamic contour tonometry; corrected OPA (cOPA) was calculated at baseline and at 1 week and 1, 3, and 6 months after treatment. After 6 months of treatment, tafluprost significantly reduced IOP (P < 0.001). The OPA lowering effects differed significantly between the two treatment groups (P = 0.003). The cOPA-lowering effect of tafluprost (1.09 mmHg) was significantly greater than that of DTFC (0.36 mmHg) after 6 months of treatment (P = 0.01). Tafluprost and DTFC glaucoma treatments provided marked OPA and IOP lowering effects. Tafluprost had a greater effect than DTFC; thus, this drug is recommended for patients at risk of glaucoma progression, due to the high OPA caused by large fluctuations in IOP.

  11. Study of a diffusion flamelet model, with preferential diffusion effects included

    NARCIS (Netherlands)

    Delhaye, S.; Somers, L.M.T.; Bongers, H.; Oijen, van J.A.; Goey, de L.P.H.; Dias, V.

    2005-01-01

    The non-premixed flamelet model of Peters [1] (model1), which does not include preferential diffusion effects is investigated. Two similar models are presented, but without the assumption of unity Lewis numbers. One of these models was derived by Peters & Pitsch [2] (model2), while the other one was

  12. Spectral interferometry including the effect of transparent thin films to measure distances and displacements

    International Nuclear Information System (INIS)

    Hlubina, P.

    2004-01-01

    A spectral-domain interferometric technique is applied for measuring mirror distances and displacements in a dispersive Michelson interferometer when the effect of transparent thin films coated onto the interferometer beam splitter and compensator is known. We employ a low-resolution spectrometer in two experiments with different amounts of dispersion in a Michelson interferometer that includes fused-silica optical sample. Knowing the thickness of the optical sample and the nonlinear phase function of the thin films, the positions of the interferometer mirror are determined precisely by a least-squares fitting of the theoretical spectral interferograms to the recorded ones. We compare the results of the processing that include and do not include the effect of transparent thin films (Author)

  13. Epidemic spreading in scale-free networks including the effect of individual vigilance

    International Nuclear Information System (INIS)

    Gong Yong-Wang; Song Yu-Rong; Jiang Guo-Ping

    2012-01-01

    In this paper, we study the epidemic spreading in scale-free networks and propose a new susceptible-infected-recovered (SIR) model that includes the effect of individual vigilance. In our model, the effective spreading rate is dynamically adjusted with the time evolution at the vigilance period. Using the mean-field theory, an analytical result is derived. It shows that individual vigilance has no effect on the epidemic threshold. The numerical simulations agree well with the analytical result. Furthermore, we investigate the effect of individual vigilance on the epidemic spreading speed. It is shown that individual vigilance can slow the epidemic spreading speed effectively and delay the arrival of peak epidemic infection. (general)

  14. Effect of alterations in glomerular charge on deposition of cationic and anionic antibodies to fixed glomerular antigens in the rat.

    Science.gov (United States)

    Adler, S; Baker, P; Pritzl, P; Couser, W G

    1985-07-01

    Reduction of the negative charge of the glomerular capillary wall alters its charge- and size-selective properties. To investigate the effect of alteration in glomerular charge properties on antibody localization, we prepared cationic and anionic fractions of antibodies to subepithelial and glomerular basement membrane (GBM) antigens, and compared their deposition in normal rats and rats treated with protamine sulfate or aminonucleoside of puromycin to reduce capillary wall charge. IgG antibodies were eluted from kidneys of rats with active Heymann's nephritis (AICN), passive Heymann's nephritis (PHN), or anti-GBM nephritis (NTN), separated into cationic and anionic fractions, and radiolabeled with iodine 125 or iodine 131. Relative antibody content of each fraction was determined by incubation with an excess of glomerular antigen. Varying amounts of cationic and anionic IgG eluted from kidneys of rats with AICN or PHN were injected into 24 normal or protamine sulfate-treated rats. Glomerular binding of all antibodies was highly correlated with IgG delivery to the kidney. The ratio of cationic to anionic antibody deposited in the glomeruli of normal rats after 4 hours was 1.08 +/- 0.07 for AICN eluate and 0.37 +/- 0.04 for PHN eluate. The ratios were not significantly different in animals pretreated with protamine sulfate (1.15 +/- 0.06 and 0.44 +/- 0.06, respectively; P greater than 0.05). Varying amounts of cationic and anionic IgG eluted from kidneys of rats with NTN were injected into 10 normal rats and four rats treated with aminonucleoside of puromycin. Glomerular binding of antibody was again highly correlated with IgG delivery to the kidney. The ratio of cationic to anionic antibody deposited in the glomeruli of normal rats after 1 hour was 1.03 +/- 0.06, and was not significantly altered in rats treated with aminonucleoside of puromycin (1.05 +/- 0.03, P greater than 0.5). Proteinuria in PHN rats was also unaffected by treatment with protamine sulfate for

  15. On the effect of cross sectional shape on incipient motion and deposition of sediments in fixed bed channels

    Directory of Open Access Journals (Sweden)

    Safari Mir-Jafar-Sadegh

    2014-03-01

    Full Text Available The condition of incipient motion and deposition are of the essential issues for the study of sediment transport. This phenomenon is of great importance to hydraulic engineers for designing sewers, drainage, as well as other rigid boundary channels. This is a study carried out with the objectives of describing the effect of cross-sectional shape on incipient motion and deposition of particles in rigid boundary channels. In this research work, the experimental data given by Loveless (1992 and Mohammadi (2005 are used. On the basis of the critical velocity approach, a new incipient motion equation for a V-shaped bottom channel and incipient deposition of sediment particles equations for rigid boundary channels having circular, rectangular, and U-shaped cross sections are obtained. New equations were compared to the other incipient motion equations. The result shows that the cross-sectional shape is an important factor for defining the minimum velocity for no-deposit particles. This study also distinguishes incipient motion of particles from incipient deposition for particles. The results may be useful for designing fixed bed channels with a limited deposition condition.

  16. Effects of exposure to 56Fe particles of protons on fixed-ratio operant responding in rats

    International Nuclear Information System (INIS)

    Rabin, B.M.; Buhler, L.L.; Jenkins, D.G.; Joseph, J.A.; Shukitt-Hale, B.

    2002-01-01

    On long-duration trips outside of the magnetosphere, astronauts will be exposed to protons and to heavy particles which can affect their performance of required tasks. It is essential to determine the range of behaviors that might be affected by exposure to these types of radiation in order to understand the nature of behavioral deficits and to develop effective countermeasures. The present experiment examined the ability of rats to make an operant response following exposure to protons (250 MeV, 4 Gy) or 56 Fe particles (1 GeV/n, 1 or 2 Gy). Following irradiation, rats were trained to press a lever in order to obtain food reinforcement. They were then placed on an ascending fixed-ratio schedule from FR-1 (each lever press rewarded with a food pellet) through FR-35 (35 lever presses required for 1 food pellet). Rats exposed to 4 Gy of protons or 1 Gy of 56 Fe particles responded similarly to controls, increasing their rate of responding as the ratio increased. However, rats exposed to 2 Gy of 56 Fe particles failed to increase their rate of responding at ratios greater than FR-20, indicating that rats exposed to 2 Gy of 56 Fe particles cannot respond appropriately to increasing work requirements. (author)

  17. NNPDF2.1: Including heavy quark mass effects in NNPDF fits

    International Nuclear Information System (INIS)

    Guffanti, A.

    2011-01-01

    In this contribution we present the NNPDF2.1 parton distribution functions (PDF) set. The NNPDF2.1 set is a set extracted from a global fit to Deep-Inelastic Scattering (DIS), fixed target Drell-Yan (DY), Electroweak vector boson and inclusive jet cross-sections at colliders data. It is performed using the NNPDF methodology which relies on Monte Carlo techniques for determination of uncertainties and Neural Networks as unbiased interpolants.

  18. The effect of fixed charge density and cartilage swelling on mechanics of knee joint cartilage during simulated gait.

    Science.gov (United States)

    Räsänen, Lasse P; Tanska, Petri; Zbýň, Štefan; van Donkelaar, Corrinus C; Trattnig, Siegfried; Nieminen, Miika T; Korhonen, Rami K

    2017-08-16

    The effect of swelling of articular cartilage, caused by the fixed charge density (FCD) of proteoglycans, has not been demonstrated on knee joint mechanics during simulated walking before. In this study, the influence of the depth-wise variation of FCD was investigated on the internal collagen fibril strains and the mechanical response of the knee joint cartilage during gait using finite element (FE) analysis. The FCD distribution of tibial cartilage was implemented from sodium ( 23 Na) MRI into a 3-D FE-model of the knee joint ("Healthy model"). For comparison, models with decreased FCD values were created according to the decrease in FCD associated with the progression of osteoarthritis (OA) ("Early OA" and "Advanced OA" models). In addition, a model without FCD was created ("No FCD" model). The effect of FCD was studied with five different collagen fibril network moduli of cartilage. Using the reference fibril network moduli, the decrease in FCD from "Healthy model" to "Early OA" and "Advanced OA" models resulted in increased axial strains (by +2 and +6%) and decreased fibril strains (by -3 and -13%) throughout the stance, respectively, calculated as mean values through cartilage depth in the tibiofemoral contact regions. Correspondingly, compared to the "Healthy model", the removal of the FCD altogether in "NoFCD model" resulted in increased mean axial strains by +16% and decreased mean fibril strains by -24%. This effect was amplified as the fibril network moduli were decreased by 80% from the reference. Then mean axial strains increased by +6, +19 and +49% and mean fibril strains decreased by -9, -20 and -32%, respectively. Our results suggest that the FCD in articular cartilage has influence on cartilage responses in the knee during walking. Furthermore, the FCD is suggested to have larger impact on cartilage function as the collagen network degenerates e.g. in OA. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. A thermal conductivity model for nanofluids including effect of the temperature-dependent interfacial layer

    International Nuclear Information System (INIS)

    Sitprasert, Chatcharin; Dechaumphai, Pramote; Juntasaro, Varangrat

    2009-01-01

    The interfacial layer of nanoparticles has been recently shown to have an effect on the thermal conductivity of nanofluids. There is, however, still no thermal conductivity model that includes the effects of temperature and nanoparticle size variations on the thickness and consequently on the thermal conductivity of the interfacial layer. In the present work, the stationary model developed by Leong et al. (J Nanopart Res 8:245-254, 2006) is initially modified to include the thermal dispersion effect due to the Brownian motion of nanoparticles. This model is called the 'Leong et al.'s dynamic model'. However, the Leong et al.'s dynamic model over-predicts the thermal conductivity of nanofluids in the case of the flowing fluid. This suggests that the enhancement in the thermal conductivity of the flowing nanofluids due to the increase in temperature does not come from the thermal dispersion effect. It is more likely that the enhancement in heat transfer of the flowing nanofluids comes from the temperature-dependent interfacial layer effect. Therefore, the Leong et al.'s stationary model is again modified to include the effect of temperature variation on the thermal conductivity of the interfacial layer for different sizes of nanoparticles. This present model is then evaluated and compared with the other thermal conductivity models for the turbulent convective heat transfer in nanofluids along a uniformly heated tube. The results show that the present model is more general than the other models in the sense that it can predict both the temperature and the volume fraction dependence of the thermal conductivity of nanofluids for both non-flowing and flowing fluids. Also, it is found to be more accurate than the other models due to the inclusion of the effect of the temperature-dependent interfacial layer. In conclusion, the present model can accurately predict the changes in thermal conductivity of nanofluids due to the changes in volume fraction and temperature for

  20. A technique of including the effect of aging of passive components in probabilistic risk assessments

    International Nuclear Information System (INIS)

    Phillips, J.H.; Weidenhamer, G.H.

    1992-01-01

    The probabilistic risk assessments (PRAS) being developed at most nuclear power plants to calculate the risk of core damage generally focus on the possible failure of active components. The possible failure of passive components is given little consideration. We are developing methods for selecting risk-significant passive components and including them in PRAS. These methods provide effective ways to prioritize passive components for inspection, and where inspection reveals aging damage, mitigation or repair can be employed to reduce the likelihood of component failure. We demonstrated a method by selecting a weld in the auxiliary feedwater (AFW) system, basing our selection on expert judgement of the likelihood of failure and on an estimate of the consequence of component failure to plant safety. We then modified and used the Piping Reliability Analysis Including Seismic Events (PRAISE) computer code to perform a probabilistic structural analysis to calculate the probability that crack growth due to aging would cause the weld to fail. The PRAISE code was modified to include the effects of changing design material properties with age and changing stress cycles. The calculation included the effects of mechanical loads and thermal transients typical of the service loads for this piping design and the effects of thermal cycling caused by a leaking check valve. However, this particular calculation showed little change in low component failure probability and plant risk for 48 years of service. However, sensitivity studies showed that if the probability of component failure is high, the effect on plant risk is significant. The success of this demonstration shows that this method could be applied to nuclear power plants. The demonstration showed the method is too involved (PRAISE takes a long time to perform the calculation and the input information is extensive) for handling a large number of passive components and therefore simpler methods are needed

  1. Psychosocial job quality and mental health among young workers: a fixed-effects regression analysis using 13 waves of annual data.

    Science.gov (United States)

    Milner, Allison; Krnjack, Lauren; LaMontagne, Anthony D

    2017-01-01

    Objectives Entry into employment may be a time when a young person's well-being and mental health is challenged. Specifically, we examined the difference in mental health when a young person was "not in the labor force" (NILF) (ie, non-working activity such as participating in education) compared to being in a job with varying levels of psychosocial quality. Method The data source for this study was the Household Income and Labor Dynamics in Australia (HILDA) study, and the sample included 10 534 young people (aged ≤30 years). We used longitudinal fixed-effects regression to investigate within-person changes in mental health comparing circumstances where individuals were NILF to when they were employed in jobs of varying psychosocial quality. Results Compared to when individuals were not in the labor force, results suggest a statistically significant decline in mental health when young people were employed in jobs with poor psychosocial working conditions and an improvement in mental health when they were employed in jobs with optimal psychosocial working conditions. Our results were robust to various sensitivity tests, including adjustment for life events and the lagged effects of mental health and job stressors. Conclusions If causal, the results suggest that improving the psychosocial quality of work for younger workers will protect and promote their wellbeing, and may reduce the likelihood of mental health problems later on.

  2. Long-term remineralizing effect of MI Paste Plus on regression of early caries after orthodontic fixed appliance treatment: a 12-month follow-up randomized controlled trial.

    Science.gov (United States)

    Beerens, Moniek W; Ten Cate, Jacob M; Buijs, Mark J; van der Veen, Monique H

    2017-11-17

    Casein-phosphopeptide-amorphous-calcium-fluoride-phosphate (CPP-ACFP) can remineralize subsurface lesions. It is the active ingredient of MI-Paste-Plus® (MPP). The long-term remineralization efficacy is unknown. To evaluate the long-term effect of MPP versus a placebo paste on remineralization of enamel after fixed orthodontic treatment over a 12-month period. This trial was designed as a prospective, double-blinded, placebo-controlled RCT. Patients with subsurface lesions scheduled for removal of the appliance were included. They applied either MPP or control paste once a day at bedtime for 12 months, complementary to normal oral hygiene. Changes in enamel lesions (primary outcome) were fluorescence loss and lesion area determined by quantitative light-induced fluorescence (QLF). Secondary outcomes were Microbial composition, by conventional plating, and acidogenicity of plaque, by capillary ion analysis (CIA), and lesion changes scored visually on clinical photographs. Participants [age = 15.5 years (SD = 1.6)] were randomly assigned to either the MPP or the control group, as determined by a computer-randomization scheme, created and locked before the start of the study. Participants received neutral-coloured concealed toothpaste tubes marked A or B. The patients and the observers were blinded with respect to the content of tube A or B. A total of 51 patients were analysed; MPP (n = 25) versus control group (n = 26); data loss (n = 14). There was no significant difference between the groups over time for all the used outcome measures. There was a significant improvement in enamel lesions (fluorescence loss) over time in both groups (P orthodontic fixed appliance treatment did not improve these lesions during the 1 year following debonding. This trial is registered at the medical ethical committee of the VU Medical Centre in Amsterdam (NL.199226.029.07). © The Author 2017. Published by Oxford University Press on behalf of the European Orthodontic Society

  3. Unified theory of dislocation motion including thermal activation and inertial effects

    International Nuclear Information System (INIS)

    Isaac, R.D.; Granato, A.V.

    1979-01-01

    Transition-state rate theory has generally been used to explain the temperature dependence of the flow stress of a crystal. However, the existence of a change in the flow stress during the superconducting transition indicates the presence of inertial effects in which dislocations overcome obstacles mechanically rather than thermally. It is shown here that the thermally activated and the inertial overcoming of obstacles are not unrelated but can both be derived from principles of stochastic motion. This leads to a theory of dislocation motion that includes both thermal activation and inertial effects. It is also shown that a distribution of activation energies must be considered to account for the experimental data

  4. Effect on Intraocular Pressure of Switching from Latanoprost and Travoprost Monotherapy to Timolol Fixed Combinations in Patients with Normal-Tension Glaucoma

    Directory of Open Access Journals (Sweden)

    Ryoko Igarashi

    2014-01-01

    Full Text Available Purpose. To evaluate the effect on intraocular pressure (IOP of switching from latanoprost and travoprost monotherapy to timolol fixed combinations in Japanese patients with normal-tension glaucoma (NTG. Methods. 27 NTG patients (54 eyes were compared IOP, superficial punctuate keratitis (SPK scores, and conjunctival injection scores in eyes treated with prostaglandin (PG or PG analog/beta-blocker (PG/b fixed-combination 6 months after the change in therapy. Results. The mean baseline intraocular pressure was 17.4±1.59 mmHg in eyes receiving PG therapy only and 17.4±1.69 mmHg in eyes switched to PG/b. Switching to fixed combination therapy from PG monotherapy, the mean IOP was 13.1±1.79 mmHg (P<0.001  (-24.71% reduction from baseline at 6 months. The mean conjunctival injection score was 0.69 for eyes on PG monotherapy and 0.56 for eyes on fixed combination therapy (P=0.028. The mean SPK scores were 0.46 and 0.53. This difference was not statistically significant (P=0.463. Conclusions. Switching from PG monotherapy to PG/b fixed combination therapy for NTG resulted in a greater intraocular pressure reduction than PG alone without increasing the number of instillations.

  5. Finite element modeling of contaminant transport in soils including the effect of chemical reactions.

    Science.gov (United States)

    Javadi, A A; Al-Najjar, M M

    2007-05-17

    The movement of chemicals through soils to the groundwater is a major cause of degradation of water resources. In many cases, serious human and stock health implications are associated with this form of pollution. Recent studies have shown that the current models and methods are not able to adequately describe the leaching of nutrients through soils, often underestimating the risk of groundwater contamination by surface-applied chemicals, and overestimating the concentration of resident solutes. Furthermore, the effect of chemical reactions on the fate and transport of contaminants is not included in many of the existing numerical models for contaminant transport. In this paper a numerical model is presented for simulation of the flow of water and air and contaminant transport through unsaturated soils with the main focus being on the effects of chemical reactions. The governing equations of miscible contaminant transport including advection, dispersion-diffusion and adsorption effects together with the effect of chemical reactions are presented. The mathematical framework and the numerical implementation of the model are described in detail. The model is validated by application to a number of test cases from the literature and is then applied to the simulation of a physical model test involving transport of contaminants in a block of soil with particular reference to the effects of chemical reactions. Comparison of the results of the numerical model with the experimental results shows that the model is capable of predicting the effects of chemical reactions with very high accuracy. The importance of consideration of the effects of chemical reactions is highlighted.

  6. The Effect on Treatment Adherence of Administering Drugs as Fixed-Dose Combinations versus as Separate Pills: Systematic Review and Meta-Analysis

    NARCIS (Netherlands)

    van Galen, Katy A.; Nellen, Jeannine F.; Nieuwkerk, Pythia T.

    2014-01-01

    Administering drugs as fixed-dose combinations (FDCs) versus the same active drugs administered as separate pills is assumed to enhance treatment adherence. We synthesized evidence from randomized controlled trials (RCTs) about the effect of FDCs versus separate pills on adherence. We searched

  7. Using Multisite Experiments to Study Cross-Site Variation in Treatment Effects: A Hybrid Approach with Fixed Intercepts and A Random Treatment Coefficient

    Science.gov (United States)

    Bloom, Howard S.; Raudenbush, Stephen W.; Weiss, Michael J.; Porter, Kristin

    2017-01-01

    The present article considers a fundamental question in evaluation research: "By how much do program effects vary across sites?" The article first presents a theoretical model of cross-site impact variation and a related estimation model with a random treatment coefficient and fixed site-specific intercepts. This approach eliminates…

  8. [Evaluation of Cellular Effects Caused by Lunar Regolith Simulant Including Fine Particles].

    Science.gov (United States)

    Horie, Masanori; Miki, Takeo; Honma, Yoshiyuki; Aoki, Shigeru; Morimoto, Yasuo

    2015-06-01

    The National Aeronautics and Space Administration has announced a plan to establish a manned colony on the surface of the moon, and our country, Japan, has declared its participation. The surface of the moon is covered with soil called lunar regolith, which includes fine particles. It is possible that humans will inhale lunar regolith if it is brought into the spaceship. Therefore, an evaluation of the pulmonary effects caused by lunar regolith is important for exploration of the moon. In the present study, we examine the cellular effects of lunar regolith simulant, whose components are similar to those of lunar regolith. We focused on the chemical component and particle size in particular. The regolith simulant was fractionated to lunar regolith simulant such as cell membrane damage, induction of oxidative stress and proinflammatory effect.

  9. Transient Response Dynamic Module Modifications to Include Static and Kinetic Friction Effects

    Science.gov (United States)

    Misel, J. E.; Nenno, S. B.; Takahashi, D.

    1984-01-01

    A methodology that supports forced transient response dynamic solutions when both static and kinetic friction effects are included in a structural system model is described. Modifications that support this type of nonlinear transient response solution are summarized for the transient response dynamics (TRD) NASTRAN module. An overview of specific modifications for the NASTRAN processing subroutines, INITL, TRD1C, and TRD1D, are described with further details regarding inspection of nonlinear input definitions to define the type of nonlinear solution required, along with additional initialization requirements and specific calculation subroutines to successfully solve the transient response problem. The extension of the basic NASTRAN nonlinear methodology is presented through several stages of development to the point where constraint equations and residual flexibility effects are introduced into the finite difference Newmark-Beta recurrsion formulas. Particular emphasis is placed on cost effective solutions for large finite element models such as the Space Shuttle with friction degrees of freedom between the orbiter and payloads mounted in the cargo bay. An alteration to the dynamic finite difference equations of motion is discussed, which allows one to include friction effects at reasonable cost for large structural systems such as the Space Shuttle. Data are presented to indicate the possible impact of transient friction loads to the payload designer for the Space Shuttle. Transient response solution data are also included, which compare solutions without friction forces and those with friction forces for payloads mounted in the Space Shuttle cargo bay. These data indicate that payload components can be sensitive to friction induced loads.

  10. Including nonadditive genetic effects in mating programs to maximize dairy farm profitability.

    Science.gov (United States)

    Aliloo, H; Pryce, J E; González-Recio, O; Cocks, B G; Goddard, M E; Hayes, B J

    2017-02-01

    We compared the outcome of mating programs based on different evaluation models that included nonadditive genetic effects (dominance and heterozygosity) in addition to additive effects. The additive and dominance marker effects and the values of regression on average heterozygosity were estimated using 632,003 single nucleotide polymorphisms from 7,902 and 7,510 Holstein cows with calving interval and production (milk, fat, and protein yields) records, respectively. Expected progeny values were computed based on the estimated genetic effects and genotype probabilities of hypothetical progeny from matings between the available genotyped cows and the top 50 young genomic bulls. An index combining the traits based on their economic values was developed and used to evaluate the performance of different mating scenarios in terms of dollar profit. We observed that mating programs with nonadditive genetic effects performed better than a model with only additive effects. Mating programs with dominance and heterozygosity effects increased milk, fat, and protein yields by up to 38, 1.57, and 1.21 kg, respectively. The inclusion of dominance and heterozygosity effects decreased calving interval by up to 0.70 d compared with random mating. The average reduction in progeny inbreeding by the inclusion of nonadditive genetic effects in matings compared with random mating was between 0.25 to 1.57 and 0.64 to 1.57 percentage points for calving interval and production traits, respectively. The reduction in inbreeding was accompanied by an average of A$8.42 (Australian dollars) more profit per mating for a model with additive, dominance, and heterozygosity effects compared with random mating. Mate allocations that benefit from nonadditive genetic effects can improve progeny performance only in the generation where it is being implemented, and the gain from specific combining abilities cannot be accumulated over generations. Continuous updating of genomic predictions and mate

  11. Effect of tightening torque on the marginal adaptation of cement-retained implant-supported fixed dental prostheses.

    Science.gov (United States)

    Ghanbarzadeh, Jalil; Dashti, Hossin; Karamad, Reza; Alikhasi, Marzieh; Nakhaei, Mohammadreza

    2015-01-01

    The final position of the abutment changes with the amount of tightening torque. This could eventually lead to loss of passivity and marginal misfit of prostheses. The aim of this study was to evaluate the effect of three different tightening torques on the marginal adaptation of 3-unit cement-retained implant-supported fixed dental prostheses (FDPs). Two implants (Straumann) were inserted in an acrylic block so that one of the implants was placed vertically and the other at a 15° vertical angle. A straight abutment and a 15° angulated abutment were connected to the vertically and obliquely installed implants, respectively, so that the two abutments were parallel. Then, 10 cement-retained FDPs were waxed and cast. Abutments were tightened with 10, 20, and 35 Ncm torques, respectively. Following each tightening torque, FDPs were luted on respective abutments with temporary cement. The marginal adaptation of the retainers was evaluated using stereomicroscope. FDPs were then removed from the abutments and were sectioned at the connector sites. The retainers were luted again on their respective abutments. Luting procedures and marginal adaptation measurement were repeated. Data were analyzed by ANOVA and least significant difference tests (α = 0.05). After cutting the FDP connectors, the independent samples t-test was used to compare misfit values (α = 0.05). Following 10, 20, and 35 Ncm tightening torques, the marginal discrepancy of the retainers of FDPs significantly increased (P marginal discrepancies of these two retainers (P > 0.05). The marginal gap values of angulated abutment retainers (ANRs) were significantly higher than those of the straight abutment after cutting the connectors (P = 0.026). Within the limitations of this study, the marginal misfit of cement-retained FDPs increased continuously when the tightening torque increased. After cutting the connectors, the marginal misfit of the ANRs was higher than those of the straight abutment retainers.

  12. A new wall function boundary condition including heat release effect for supersonic combustion flows

    International Nuclear Information System (INIS)

    Gao, Zhen-Xun; Jiang, Chong-Wen; Lee, Chun-Hian

    2016-01-01

    Highlights: • A new wall function including heat release effect is theoretically derived. • The new wall function is a unified form holding for flows with/without combustion. • The new wall function shows good results for a supersonic combustion case. - Abstract: A new wall function boundary condition considering combustion heat release effect (denoted as CWFBC) is proposed, for efficient predictions of skin friction and heat transfer in supersonic combustion flows. Based on a standard flow model including boundary-layer combustion, the Shvab–Zeldovich coupling parameters are introduced to derive a new velocity law-of-the-wall including the influence of combustion. For the temperature law-of-the-wall, it is proposed to use the enthalpy–velocity relation, instead of the Crocco–Busemann equation, to eliminate explicit influence of chemical reactions. The obtained velocity and temperature law-of-the-walls constitute the CWFBC, which is a unified form simultaneously holding for single-species, multi-species mixing and multi-species reactive flows. The subsequent numerical simulations using this CWFBC on an experimental case indicate that the CWFBC could accurately reflect the influences on the skin friction and heat transfer by the chemical reactions and heat release, and show large improvements compared to previous WFBC. Moreover, the CWFBC can give accurate skin friction and heat flux for a coarse mesh with y"+ up to 200 for the experimental case, except for slightly larger discrepancy of the wall heat flux around ignition position.

  13. CFD simulations and reduced order modeling of a refrigerator compartment including radiation effects

    International Nuclear Information System (INIS)

    Bayer, Ozgur; Oskay, Ruknettin; Paksoy, Akin; Aradag, Selin

    2013-01-01

    Highlights: ► Free convection in a refrigerator is simulated including radiation effects. ► Heat rates are affected drastically when radiation effects are considered. ► 95% of the flow energy can be represented by using one spatial POD mode. - Abstract: Considering the engineering problem of natural convection in domestic refrigerator applications, this study aims to simulate the fluid flow and temperature distribution in a single commercial refrigerator compartment by using the experimentally determined temperature values as the specified constant wall temperature boundary conditions. The free convection in refrigerator applications is evaluated as a three-dimensional (3D), turbulent, transient and coupled non-linear flow problem. Radiation heat transfer mode is also included in the analysis. According to the results, taking radiation effects into consideration does not change the temperature distribution inside the refrigerator significantly; however the heat rates are affected drastically. The flow inside the compartment is further analyzed with a reduced order modeling method called Proper Orthogonal Decomposition (POD) and the energy contents of several spatial and temporal modes that exist in the flow are examined. The results show that approximately 95% of all the flow energy can be represented by only using one spatial mode

  14. Cellular effects of curcumin on Plasmodium falciparum include disruption of microtubules.

    Directory of Open Access Journals (Sweden)

    Rimi Chakrabarti

    Full Text Available Curcumin has been widely investigated for its myriad cellular effects resulting in reduced proliferation of various eukaryotic cells including cancer cells and the human malaria parasite Plasmodium falciparum. Studies with human cancer cell lines HT-29, Caco-2, and MCF-7 suggest that curcumin can bind to tubulin and induce alterations in microtubule structure. Based on this finding, we investigated whether curcumin has any effect on P. falciparum microtubules, considering that mammalian and parasite tubulin are 83% identical. IC50 of curcumin was found to be 5 µM as compared to 20 µM reported before. Immunofluorescence images of parasites treated with 5 or 20 µM curcumin showed a concentration-dependent effect on parasite microtubules resulting in diffuse staining contrasting with the discrete hemispindles and subpellicular microtubules observed in untreated parasites. The effect on P. falciparum microtubules was evident only in the second cycle for both concentrations tested. This diffuse pattern of tubulin fluorescence in curcumin treated parasites was similar to the effect of a microtubule destabilizing drug vinblastine on P. falciparum. Molecular docking predicted the binding site of curcumin at the interface of alpha and beta tubulin, similar to another destabilizing drug colchicine. Data from predicted drug binding is supported by results from drug combination assays showing antagonistic interactions between curcumin and colchicine, sharing a similar binding site, and additive/synergistic interactions of curcumin with paclitaxel and vinblastine, having different binding sites. This evidence suggests that cellular effects of curcumin are at least, in part, due to its perturbing effect on P. falciparum microtubules. The action of curcumin, both direct and indirect, on P. falciparum microtubules is discussed.

  15. Effects of benzalkonium chloride- or polyquad-preserved fixed combination glaucoma medications on human trabecular meshwork cells.

    Science.gov (United States)

    Ammar, David A; Kahook, Malik Y

    2011-01-01

    We investigated the potential short and long-term effects in cultured human trabecular meshwork (TM) cells of various topical glaucoma formulations containing different preservatives. We tested the fixed combination medications 0.004% travoprost plus 0.5% timolol preserved with either 0.015% benzalkonium chloride (BAK; DuoTrav®), or with 0.001% polyquad (PQ; DuoTrav(®) BAK-free); and 0.005% latanoprost plus 0.5% timolol preserved with 0.020% BAK (Xalacom(®)). Also tested was a range of BAK concentrations (0.001%-0.020%) in balanced salt solution (BSS). Cells were treated for 25 min at 37 °C with solutions diluted 1:10 and 1:100 to mimic the reduced penetration of topical preparations to the anterior chamber. The percentage of live cells was determined immediately after treatment through the uptake of the fluorescent vital dye calcein-AM. To determine any long-term effects, we assayed release of matrix metalloproteinase 9 (MMP-9) and apoptosis 24 h after treatments. BAK demonstrated a dose-dependent reduction in TM cell viability, ranging from 71±5% live cells at 0.001% BAK (diluted 1:10) to 33±3% live cells at 0.020% BAK (diluted 1:10). Travoprost (0.004%) plus 0.5% timolol preserved with 0.015% BAK had statistically fewer live TM cells (79±7%) than the same preparation preserved with 0.001% polyquad® (PQ; 93±1%; p<0.001). Latanoprost plus timolol preserved with 0.020% BAK (29±9% live cells) was similar to the 0.020% BAK (33±3%) treatment. However, travoprost plus timolol preserved in 0.015% BAK had significantly more live cells (83±12%) than the 1:10 dilution of 0.015% BAK (49±10%). We also found 0.020% BAK (diluted 1:100) resulted in elevated levels of extracellular MMP-9 at 24 h. These results demonstrate that the substitution of the preservative BAK from topical ophthalmic drugs results in greater in vitro viability of TM cells. Travoprost with timolol, but not latanoprost with timolol, countered some of the toxic BAK effects. BAK treatment

  16. Radiographic evaluation of apical root resorption following fixed orthodontic treatment

    OpenAIRE

    Sina Haghanifar; Valiollah Arash; Farhad Soboti; Nasim Jafari

    2012-01-01

    Background and Aims: Apical root resorption is an adverse side effect of fixed orthodontic treatment which cannot be repaired. The aim of this study was to use panoramic radiographs to compare the root resorption before and after the orthodontic treatment with standard edgewise .018 appliance.Materials and Methods: The before and after treatment panoramic views of sixty-three patients needed fixed orthodontic treatment included 1520 teeth were categorized into 3 Grades (G0: without resorption...

  17. Effect of free and symbiotic nitrogen fixing bacterial co-inoculation on seed and seedling of soybean seeds produced under deficit water condition

    Directory of Open Access Journals (Sweden)

    Hamed Hadi

    2016-04-01

    Full Text Available Effect of free and symbiotic nitrogen fixing bacteria on seed and seedling produced seeds under deficit irrigation was conducted in laboratory and field experiments in 2006. In laboratory of karaj’s Seed and Plant Research and Certificate Institute an experiment was conducted based on factorial in form of completely randomized design with four replications and in field’s of Islamic Azad University, Varamin Branch were split factorial in form of randomized completely block design with three replications. Treatments included water stress [Irrigation after 50 (Normal irrigation, 100 (Middle stress, 150 (Severe stress mm evaporation from pan class A], Cultivar [Manokin & Williams and SRF×T3 Line] and inoculation [Inoculation with Bradyrhizobium japonicum, Bradyrhizobium japonicum co-inoculated with Azotobacter chroococcum, No seed inoculation]. Results showed that drought stress decreased the uniformity and germination speed and seedling emergence. Bacteria increased leaf dry weight, stem dry weight, leaf area and seedling vigor index but had no effect on emergence. In irrigation levels inoculated treatments had higher seedling length, leaf, stem, seedling dry weight and seedling vigor. Severs stress seeds inoculated with Bradyrhizobium japonicum had higher root dry weight than control. Therefore in seeds which were produced under deficit irrigation conditions, bacteria increased seedlings vigor.

  18. Modeling of the Direct Current Generator Including the Magnetic Saturation and Temperature Effects

    Directory of Open Access Journals (Sweden)

    Alfonso J. Mercado-Samur

    2013-11-01

    Full Text Available In this paper the inclusion of temperature effect on the field resistance on the direct current generator model DC1A, which is valid to stability studies is proposed. First, the linear generator model is presented, after the effect of magnetic saturation and the change in the resistance value due to temperature produced by the field current are included. The comparison of experimental results and model simulations to validate the model is used. A direct current generator model which is a better representation of the generator is obtained. Visual comparison between simulations and experimental results shows the success of the proposed model, because it presents the lowest error of the compared models. The accuracy of the proposed model is observed via Modified Normalized Sum of Squared Errors index equal to 3.8979%.

  19. Non-kinematic Flux-transport Dynamos Including the Effects of Diffusivity Quenching

    Energy Technology Data Exchange (ETDEWEB)

    Ichimura, Chiaki; Yokoyama, Takaaki [Department of Earth and Planetary Science, The University of Tokyo, Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan)

    2017-04-10

    Turbulent magnetic diffusivity is quenched when strong magnetic fields suppress turbulent motion in a phenomenon known as diffusivity quenching. Diffusivity quenching can provide a mechanism for amplifying magnetic field and influencing global velocity fields through Lorentz force feedback. To investigate this effect, we conducted mean field flux-transport dynamo simulations that included the effects of diffusivity quenching in a non-kinematic regime. We found that toroidal magnetic field strength is amplified by up to approximately 1.5 times in the convection zone as a result of diffusivity quenching. This amplification is much weaker than that in kinematic cases as a result of Lorentz force feedback on the system’s differential rotation. While amplified toroidal fields lead to the suppression of equatorward meridional flow locally near the base of the convection zone, large-scale equatorward transport of magnetic flux via meridional flow, which is the essential process of the flux-transport dynamo, is sustainable in our calculations.

  20. Should Cost-Effectiveness Analysis Include the Cost of Consumption Activities? AN Empirical Investigation.

    Science.gov (United States)

    Adarkwah, Charles Christian; Sadoghi, Amirhossein; Gandjour, Afschin

    2016-02-01

    There has been a debate on whether cost-effectiveness analysis should consider the cost of consumption and leisure time activities when using the quality-adjusted life year as a measure of health outcome under a societal perspective. The purpose of this study was to investigate whether the effects of ill health on consumptive activities are spontaneously considered in a health state valuation exercise and how much this matters. The survey enrolled patients with inflammatory bowel disease in Germany (n = 104). Patients were randomized to explicit and no explicit instruction for the consideration of consumption and leisure effects in a time trade-off (TTO) exercise. Explicit instruction to consider non-health-related utility in TTO exercises did not influence TTO scores. However, spontaneous consideration of non-health-related utility in patients without explicit instruction (60% of respondents) led to significantly lower TTO scores. Results suggest an inclusion of consumption costs in the numerator of the cost-effectiveness ratio, at least for those respondents who spontaneously consider non-health-related utility from treatment. Results also suggest that exercises eliciting health valuations from the general public may include a description of the impact of disease on consumptive activities. Copyright © 2015 John Wiley & Sons, Ltd.

  1. Challenges of including nitrogen effects on decomposition in earth system models

    Science.gov (United States)

    Hobbie, S. E.

    2011-12-01

    Despite the importance of litter decomposition for ecosystem fertility and carbon balance, key uncertainties remain about how this fundamental process is affected by nitrogen (N) availability. Nevertheless, resolving such uncertainties is critical for mechanistic inclusion of such processes in earth system models, towards predicting the ecosystem consequences of increased anthropogenic reactive N. Towards that end, we have conducted a series of experiments examining nitrogen effects on litter decomposition. We found that both substrate N and externally supplied N (regardless of form) accelerated the initial decomposition rate. Faster initial decomposition rates were linked to the higher activity of carbohydrate-degrading enzymes associated with externally supplied N and the greater relative abundances of Gram negative and Gram positive bacteria associated with green leaves and externally supplied organic N (assessed using phospholipid fatty acid analysis, PLFA). By contrast, later in decomposition, externally supplied N slowed decomposition, increasing the fraction of slowly decomposing litter and reducing lignin-degrading enzyme activity and relative abundances of Gram negative and Gram positive bacteria. Our results suggest that elevated atmospheric N deposition may have contrasting effects on the dynamics of different soil carbon pools, decreasing mean residence times of active fractions comprising very fresh litter, while increasing those of more slowly decomposing fractions including more processed litter. Incorporating these contrasting effects of N on decomposition processes into models is complicated by lingering uncertainties about how these effects generalize across ecosystems and substrates.

  2. Effectiveness and tolerability of fixed-dose combination enalapril plus nitrendipine in hypertensive patients: results of the 3-month observational, post-marketing, multicentre, prospective CENIT study.

    Science.gov (United States)

    Sierra, Alejandro de la; Roca-Cusachs, Alejandro; Redón, Josep; Marín, Rafael; Luque, Manuel; Figuera, Mariano de la; Garcia-Garcia, Margarida; Falkon, Liliana

    2009-01-01

    Monotherapy with any class of antihypertensive drug effectively controls blood pressure (BP) in only about 50% of patients. Consequently, the majority of patients with hypertension require combined therapy with two or more medications. This study aimed to evaluate the effectiveness (systolic BP [SBP]/diastolic BP [DBP] control) and tolerability of the fixed-dose combination enalapril/nitrendipine 10 mg/20 mg administered as a single daily dose in hypertensive patients. This was a post-authorization, multicentre, prospective, observational study conducted in primary care with a 3-month follow-up. Patients throughout Spain with uncontrolled hypertension (> or =140/90 mmHg for patients without diabetes mellitus, or > or =130/85 mmHg for patients with diabetes) on monotherapy or with any combination other than enalapril + nitrendipine, or who were unable to tolerate their previous antihypertensive therapy, were recruited. Change from previous to study treatment was according to usual clinical practice. BP was measured once after 5 minutes of rest in the sitting position. Therapeutic response was defined as follows: 'controlled' meant controlled BP ( or =20 mmHg and in DBP of > or =10 mmHg. The main laboratory test parameters were documented at baseline and after 3 months. Patients aged >65 years, with diabetes, with isolated systolic hypertension (ISH; SBP > or =140 mmHg for patients without diabetes, SBP > or =130 mmHg for patients with diabetes) and who were obese (body mass index [BMI] > or =30 kg/m2) were analysed separately. Of 6537 patients included, 5010 and 6354 patients were assessed in effectiveness and tolerability analyses, respectively. In the tolerability analysis population, there were 3023 men (47.6%) and 3321 women (52.4%). The mean (+/- SD) age of the tolerability analysis group was 62.8 (+/- 10.7) years. A total of 71.1% of the patients presented at least one clinical cardiovascular risk factor other than hypertension, with the most frequent being

  3. Effects of Low Light on Agronomic and Physiological Characteristics of Rice Including Grain Yield and Quality

    Directory of Open Access Journals (Sweden)

    Qi-hua LIU

    2014-09-01

    Full Text Available Light intensity is one of the most important environmental factors that determine the basic characteristics of rice development. However, continuously cloudy weather or rainfall, especially during the grain-filling stage, induces a significant loss in yield and results in poor grain quality. Stress caused by low light often creates severe meteorological disasters in some rice-growing regions worldwide. This review was based on our previous research and related research regarding the effects of low light on rice growth, yield and quality as well as the formation of grain, and mainly reviewed the physiological metabolism of rice plants, including characteristics of photosynthesis, activities of antioxidant enzymes in rice leaves and key enzymes involved in starch synthesis in grains, as well as the translocations of carbohydrate and nitrogen. These characteristics include various grain yield and rice quality components (milling and appearance as well as cooking, eating and nutritional qualities under different rates of shading imposed at the vegetative or reproductive stages of rice plants. Furthermore, we discussed why grain yield and quality are reduced under the low light environment. Next, we summarized the need for future research that emphasizes methods can effectively improve rice grain yield and quality under low light stress. These research findings can provide a beneficial reference for rice cultivation management and breeding program in low light environments.

  4. Path-integral isomorphic Hamiltonian for including nuclear quantum effects in non-adiabatic dynamics

    Science.gov (United States)

    Tao, Xuecheng; Shushkov, Philip; Miller, Thomas F.

    2018-03-01

    We describe a path-integral approach for including nuclear quantum effects in non-adiabatic chemical dynamics simulations. For a general physical system with multiple electronic energy levels, a corresponding isomorphic Hamiltonian is introduced such that Boltzmann sampling of the isomorphic Hamiltonian with classical nuclear degrees of freedom yields the exact quantum Boltzmann distribution for the original physical system. In the limit of a single electronic energy level, the isomorphic Hamiltonian reduces to the familiar cases of either ring polymer molecular dynamics (RPMD) or centroid molecular dynamics Hamiltonians, depending on the implementation. An advantage of the isomorphic Hamiltonian is that it can easily be combined with existing mixed quantum-classical dynamics methods, such as surface hopping or Ehrenfest dynamics, to enable the simulation of electronically non-adiabatic processes with nuclear quantum effects. We present numerical applications of the isomorphic Hamiltonian to model two- and three-level systems, with encouraging results that include improvement upon a previously reported combination of RPMD with surface hopping in the deep-tunneling regime.

  5. Impact analysis and testing of tritiated heavy water transportation packages including hydrodynamic effects

    International Nuclear Information System (INIS)

    Sauve, R.G.; Tulk, J.D.; Gavin, M.E.

    1989-01-01

    Ontario Hydro has recently designed a new Type B(M) Tritiated Heavy Water Transportation Package (THWTP) for the road transportation of tritiated heavy water from its operating nuclear stations to the Tritium Removal Facility in Ontario. These packages must demonstrate the ability to withstand severe shock and impact scenarios such as those prescribed by IAEA standards. The package, shown in figure 1, comprises an inner container filled with tritiated heavy water, and a 19 lb/ft 3 polyurethane foam-filled overpack. The overpack is of sandwich construction with 304L stainless steel liners and 10.5 inch thick nominal foam walls. The outer shell is 0.75 inch thick and the inner shell is 0.25 inch thick. The primary containment boundary consists of the overpack inner liner, the containment lid and outer containment seals in the lid region. The total weight of the container including the 12,000 lb. payload is 36,700 lb. The objective of the present study is to evaluate the hydrodynamic effect of the tritiated heavy water payload on the structural integrity of the THWTP during a flat end drop from a height of 9 m. The study consisted of three phases: (i) developing an analytical model to simulate the hydrodynamic effects of the heavy water payload during impact; (ii) performing an impact analysis for a 9 m flat end drop of the THWTP including fluid structure interaction; (iii) verification of the analytical models by experiment

  6. Effect of progesterone concentration and duration of proestrus on fertility in beef cattle after fixed-time artificial insemination.

    Science.gov (United States)

    Dadarwal, D; Mapletoft, R J; Adams, G P; Pfeifer, L F M; Creelman, C; Singh, J

    2013-03-15

    proestrous interval reduced pregnancy rate after fixed-time AI in beef cattle. A low progesterone environment during growth of the ovulatory follicle increased the preovulatory follicle size and subsequent CL size and function, and compensated for the effect of a short proestrus on pregnancy rates. Copyright © 2013 Elsevier Inc. All rights reserved.

  7. Juxtaposition of micro and macro dynamics of dividend policy on stock price volatility in financial sector of Pakistan : (comparative analysis through common, fixed, random and GMM effect)

    OpenAIRE

    Hamid, Kashif; Khurram, Muhammad Usman; Ghaffar, Wasim

    2017-01-01

    The purpose of this study is to analyze the dividend policy dynamics in context to firm specific and macroeconomic variables with stock price volatility in the financial sector of Pakistan. Panel data is used for the period 2006-2014 to identify the common, fixed, random and GMM effect. It is concluded that dividend payout ratio, market value, interest volatility and inflation volatility have positive significant correlation with price volatility. Common effect model shows that dividend payou...

  8. Applicability of a panel method, which includes nonlinear effects, to a forward-swept-wing aircraft

    Science.gov (United States)

    Ross, J. C.

    1984-01-01

    The ability of a lower order panel method VSAERO, to accurately predict the lift and pitching moment of a complete forward-swept-wing/canard configuration was investigated. The program can simulate nonlinear effects including boundary-layer displacement thickness, wake roll up, and to a limited extent, separated wakes. The predictions were compared with experimental data obtained using a small-scale model in the 7- by 10- Foot Wind Tunnel at NASA Ames Research Center. For the particular configuration under investigation, wake roll up had only a small effect on the force and moment predictions. The effect of the displacement thickness modeling was to reduce the lift curve slope slightly, thus bringing the predicted lift into good agreement with the measured value. Pitching moment predictions were also improved by the boundary-layer simulation. The separation modeling was found to be sensitive to user inputs, but appears to give a reasonable representation of a separated wake. In general, the nonlinear capabilities of the code were found to improve the agreement with experimental data. The usefullness of the code would be enhanced by improving the reliability of the separated wake modeling and by the addition of a leading edge separation model.

  9. Effect of postharvest practices including degreening on citrus carpoplane microbial biomes.

    Science.gov (United States)

    Gomba, A; Chidamba, L; Korsten, L

    2017-04-01

    To investigate the effect of commercial citrus packhouse processing steps on the fruit surface microbiome of Clementines and Palmer navel oranges. Viable bacteria, yeast and fungi counts, and the pyrosequencing analysis of the 16S rRNA and ITS were used to evaluate the community structure and population dynamics of phylloepiphytic bacteria and fungi associated with commercial postharvest processing. Drenching significantly reduced microbial counts in all cases except for yeasts on navels, while the extent of degreening effects varied between the citrus varieties. Pyrosequencing analysis showed a total of 4409 bacteria and 5792 fungi nonchimeric unique sequences with an average of 1102 bacteria and 1448 fungi reads per sample. Dominant phyla on the citrus carpoplane were Proteobacteria (53·5%), Actinobacteria (19·9%), Bacteroidetes (5·6%) and Deinococcus-Thermus (5·4%) for bacteria and Ascomycota (80·5%) and Basidiomycota (9·8%) for fungi. Beginning with freshly harvested fruit fungal diversity declined significantly after drenching, but had little effect on bacteria and populations recovered during degreening treatments, including those for Penicillium sp. Packhouse processing greatly influences microbial communities on the citrus carpoplane. A broad orange biome was described with pyrosequencing and gave insight into the likely survival and persistence of pathogens, especially as they may affect the quality and safety of the packed product. A close examination of the microbiota of fruit and the impact of intervention strategies on the ecological balance may provide a more durable approach to reduce losses and spoilage. © 2017 The Society for Applied Microbiology.

  10. Appropriate assessment of neighborhood effects on individual health: integrating random and fixed effects in multilevel logistic regression

    DEFF Research Database (Denmark)

    Larsen, Klaus; Merlo, Juan

    2005-01-01

    The logistic regression model is frequently used in epidemiologic studies, yielding odds ratio or relative risk interpretations. Inspired by the theory of linear normal models, the logistic regression model has been extended to allow for correlated responses by introducing random effects. However......, the model does not inherit the interpretational features of the normal model. In this paper, the authors argue that the existing measures are unsatisfactory (and some of them are even improper) when quantifying results from multilevel logistic regression analyses. The authors suggest a measure...... of heterogeneity, the median odds ratio, that quantifies cluster heterogeneity and facilitates a direct comparison between covariate effects and the magnitude of heterogeneity in terms of well-known odds ratios. Quantifying cluster-level covariates in a meaningful way is a challenge in multilevel logistic...

  11. Methods for selecting fixed-effect models for heterogeneous codon evolution, with comments on their application to gene and genome data.

    Science.gov (United States)

    Bao, Le; Gu, Hong; Dunn, Katherine A; Bielawski, Joseph P

    2007-02-08

    Models of codon evolution have proven useful for investigating the strength and direction of natural selection. In some cases, a priori biological knowledge has been used successfully to model heterogeneous evolutionary dynamics among codon sites. These are called fixed-effect models, and they require that all codon sites are assigned to one of several partitions which are permitted to have independent parameters for selection pressure, evolutionary rate, transition to transversion ratio or codon frequencies. For single gene analysis, partitions might be defined according to protein tertiary structure, and for multiple gene analysis partitions might be defined according to a gene's functional category. Given a set of related fixed-effect models, the task of selecting the model that best fits the data is not trivial. In this study, we implement a set of fixed-effect codon models which allow for different levels of heterogeneity among partitions in the substitution process. We describe strategies for selecting among these models by a backward elimination procedure, Akaike information criterion (AIC) or a corrected Akaike information criterion (AICc). We evaluate the performance of these model selection methods via a simulation study, and make several recommendations for real data analysis. Our simulation study indicates that the backward elimination procedure can provide a reliable method for model selection in this setting. We also demonstrate the utility of these models by application to a single-gene dataset partitioned according to tertiary structure (abalone sperm lysin), and a multi-gene dataset partitioned according to the functional category of the gene (flagellar-related proteins of Listeria). Fixed-effect models have advantages and disadvantages. Fixed-effect models are desirable when data partitions are known to exhibit significant heterogeneity or when a statistical test of such heterogeneity is desired. They have the disadvantage of requiring a priori

  12. Practical Calculational Scheme Implementing the Wilsonian RG Results for Nuclear Effective Field Theory Including Pions

    International Nuclear Information System (INIS)

    Kubo, H.; Harada, K.; Sakaeda, T.; Yamamoto, Y.

    2013-01-01

    On the basis of the Wilsonian renormalization group (WRG) analysis of nuclear effective field theory (NEFT) including pions, we propose a practical calculational scheme in which the short-distance part of one-pion exchange (S-OPE) is removed and represented as contact terms. The long-distance part of one-pion exchange (L-OPE) is treated as perturbation. The use of dimensional regularization (DR) for diagrams consisting only of contact interactions considerably simplifies the calculation of scattering amplitude and the renormalization group equations. NLO results for nucleon-nucleon elastic scattering in the S-waves are obtained and compared with experiments. A brief comment on NNLO calculations is given. (author)

  13. Triple Active Antiretroviral Regimen Including Enfuvirtide Via the Biojector is Effective and Safe

    Directory of Open Access Journals (Sweden)

    Mona Loutfy

    2007-01-01

    Full Text Available For full HIV virological suppression, three fully active antiretroviral agents are required. New drug classes should be included to ensure that agents are fully active. The addition of enfuvirtide and efavirenz to the present patient’s new antiretroviral regimen ensured that two fully active agents were in use in the setting of a moderate degree of nucleoside resistance and a high level of protease resistance, and where non-nucleoside reverse transcriptase inhibitors were still fully active. Both viral load and CD4 count responded favourably to this regimen. The patient received support from physicians and clinic staff in the introduction and use of enfuvirtide. To reduce injection site reactions, a needle-free injection system (Biojector proved effective.

  14. Modeling of cylindrical surrounding gate MOSFETs including the fringing field effects

    International Nuclear Information System (INIS)

    Gupta, Santosh K.; Baishya, Srimanta

    2013-01-01

    A physically based analytical model for surface potential and threshold voltage including the fringing gate capacitances in cylindrical surround gate (CSG) MOSFETs has been developed. Based on this a subthreshold drain current model has also been derived. This model first computes the charge induced in the drain/source region due to the fringing capacitances and considers an effective charge distribution in the cylindrically extended source/drain region for the development of a simple and compact model. The fringing gate capacitances taken into account are outer fringe capacitance, inner fringe capacitance, overlap capacitance, and sidewall capacitance. The model has been verified with the data extracted from 3D TCAD simulations of CSG MOSFETs and was found to be working satisfactorily. (semiconductor devices)

  15. Thermal histories of chondrules in solar nebula shocks, including the effect of molecular line cooling

    Science.gov (United States)

    Morris, Melissa A.

    Chondrules are millimeter-sized, silicate (mostly ferromagnesian) igneous spheres found within chondritic meteorites. They are some of the oldest materials in our Solar System, having formed within a few million years of its birth. Chondrules were melted at high temperature (over 1800 K), while they were free-floating objects in the early solar nebula. Their petrology and chemistry constrain their formation, especially their thermal histories. Chondrules provide some of the most powerful constraints on conditions in the solar nebula. Models in which chondrule precursors melted by passage through solar nebula shocks are very promising, and meet most constraints on chondrule formation in broad brush. However, these models have been lacking in some of the relevant physics. Previous shock models have used incorrect approximations to the input radiation boundary condition, and the opacity of solids has been treated simply. Most important, a proper treatment of cooling due to molecular line emission has not been included. In this thesis, the shock model is significantly improved in order to determine if it remains consistent with observational constraints. The appropriate boundary condition for the input radiation and the proper method for calculation of the opacity of solids are determined, and a complete treatment of molecular line cooling due to water is included. Previous estimates of the effect of line cooling predicted chondrule cooling rates in excess of 10,000 K per hour. However, once molecular line cooling due to water was incorporated into the full shock model, it was found that line cooling has a minimal effect on the thermal histories of gas and chondrules. This behavior is attributed mostly to the thermal buffering of the gas due to hydrogen dissociation and recombination, which tends to keep the gas temperature at approximately 2000 K until the column densities of water become optically thick to line emission. Chondrule cooling rates in the range of 10

  16. Stress analysis of fuel claddings with axial fins including creep effects

    International Nuclear Information System (INIS)

    Krieg, R.

    1977-01-01

    For LMFBR fuel claddings with axial fins the stress and strain fields are calculated which may be caused by internal pressure, differential thermal expansion and irradiation induced differential swelling. To provide an appropriate description of the cladding material it is assumed that the total strain is the sum of a linear elastic and a creep term, where the latter one includes the thermal as well as the irradiation induced creep. First the linear elastic problem is treated by a semi-analytical method leading to a bipotential equation for Airys' stress function. Solving this equation analytically means that the field equations valid within the cladding are satisfied exactly. By applying a combined point matching- least square-method the boundary conditions could be satisfied approximately such that in most cases the remaining error is within the uncertainty range of the loading conditions. Then the nonlinear problem which includes creep is approximated by a sequence of linear elastic solutions with time as parameter. The accumulated creep strain is treated here as an imposed strain field. To study the influence of different effects such as fin shape, temperature region, irradiation induced creep and swelling or internal pressure, a total of eleven cases with various parameter variations are investigated. The results are presented graphically in the following forms: stress and strain distributions over the cladding cross section for end of life conditions and boundary stresses and strains versus time. (Auth.)

  17. Matrix formulations of radiative transfer including the polarization effect in a coupled atmosphere-ocean system

    International Nuclear Information System (INIS)

    Ota, Yoshifumi; Higurashi, Akiko; Nakajima, Teruyuki; Yokota, Tatsuya

    2010-01-01

    A vector radiative transfer model has been developed for a coupled atmosphere-ocean system. The radiative transfer scheme is based on the discrete ordinate and matrix operator methods. The reflection/transmission matrices and source vectors are obtained for each atmospheric or oceanic layer through the discrete ordinate solution. The vertically inhomogeneous system is constructed using the matrix operator method, which combines the radiative interaction between the layers. This radiative transfer scheme is flexible for a vertically inhomogeneous system including the oceanic layers as well as the ocean surface. Compared with the benchmark results, the computational error attributable to the radiative transfer scheme has been less than 0.1% in the case of eight discrete ordinate directions. Furthermore, increasing the number of discrete ordinate directions has produced computations with higher accuracy. Based on our radiative transfer scheme, simulations of sun glint radiation have been presented for wavelengths of 670 nm and 1.6 μm. Results of simulations have shown reasonable characteristics of the sun glint radiation such as the strongly peaked, but slightly smoothed radiation by the rough ocean surface and depolarization through multiple scattering by the aerosol-loaded atmosphere. The radiative transfer scheme of this paper has been implemented to the numerical model named Pstar as one of the OpenCLASTR/STAR radiative transfer code systems, which are widely applied to many radiative transfer problems, including the polarization effect.

  18. Double-gate junctionless transistor model including short-channel effects

    International Nuclear Information System (INIS)

    Paz, B C; Pavanello, M A; Ávila-Herrera, F; Cerdeira, A

    2015-01-01

    This work presents a physically based model for double-gate junctionless transistors (JLTs), continuous in all operation regimes. To describe short-channel transistors, short-channel effects (SCEs), such as increase of the channel potential due to drain bias, carrier velocity saturation and mobility degradation due to vertical and longitudinal electric fields, are included in a previous model developed for long-channel double-gate JLTs. To validate the model, an analysis is made by using three-dimensional numerical simulations performed in a Sentaurus Device Simulator from Synopsys. Different doping concentrations, channel widths and channel lengths are considered in this work. Besides that, the series resistance influence is numerically included and validated for a wide range of source and drain extensions. In order to check if the SCEs are appropriately described, besides drain current, transconductance and output conductance characteristics, the following parameters are analyzed to demonstrate the good agreement between model and simulation and the SCEs occurrence in this technology: threshold voltage (V TH ), subthreshold slope (S) and drain induced barrier lowering. (paper)

  19. The effect of hospital mergers on long-term sickness absence among hospital employees: a fixed effects multivariate regression analysis using panel data.

    Science.gov (United States)

    Kjekshus, Lars Erik; Bernstrøm, Vilde Hoff; Dahl, Espen; Lorentzen, Thomas

    2014-02-03

    Hospitals are merging to become more cost-effective. Mergers are often complex and difficult processes with variable outcomes. The aim of this study was to analyze the effect of mergers on long-term sickness absence among hospital employees. Long-term sickness absence was analyzed among hospital employees (N = 107 209) in 57 hospitals involved in 23 mergers in Norway between 2000 and 2009. Variation in long-term sickness absence was explained through a fixed effects multivariate regression analysis using panel data with years-since-merger as the independent variable. We found a significant but modest effect of mergers on long-term sickness absence in the year of the merger, and in years 2, 3 and 4; analyzed by gender there was a significant effect for women, also for these years, but only in year 4 for men. However, men are less represented among the hospital workforce; this could explain the lack of significance. Mergers has a significant effect on employee health that should be taken into consideration when deciding to merge hospitals. This study illustrates the importance of analyzing the effects of mergers over several years and the need for more detailed analyses of merger processes and of the changes that may occur as a result of such mergers.

  20. Effectiveness of palliative care including physiotherapy in hiv patients a review of the literature

    Directory of Open Access Journals (Sweden)

    J. Uwimana

    2007-01-01

    (UNAIDS 2004.  The HIV/AIDS epidemic is devastating the African continent.In Africa poorly resourced health care infrastructure further impairs the quality of life in HIV sufferers. Palliative care is an approach that aims to improve the quality of life of people living with threatening diseases such as cancer and HIV/AIDS. This review aimed to determine the efficacy of palliative care. Complementary therapies such as Cognitive Behavioural Therapy, peer/counselling group therapy, massage  therapy, and exercise therapy constitute palliative care. Seventeen articles published in peer reviewed journals during the period 1990-2005 were reviewed. The findings of our review demonstrate that there are indications that palliative care can be effective in improving the quality of life in patients with life threatening diseases such HIV/AIDS. Research in this field is complicated by the heterogeneity of study samples, difficulty in patient recruitment, and death before the end of the intervention period. Future research in this area should aim to include larger study samples, using valid tools to assess quality of life and to employ qualitative methods in studies to assess the effectiveness of palliative care.

  1. A new model for including the effect of fly ash on biochemical methane potential.

    Science.gov (United States)

    Gertner, Pablo; Huiliñir, César; Pinto-Villegas, Paula; Castillo, Alejandra; Montalvo, Silvio; Guerrero, Lorna

    2017-10-01

    The modelling of the effect of trace elements on anaerobic digestion, and specifically the effect of fly ash, has been scarcely studied. Thus, the present work was aimed at the development of a new function that allows accumulated methane models to predict the effect of FA on the volume of methane accumulation. For this, purpose five fly ash concentrations (10, 25, 50, 250 and 500mg/L) using raw and pre-treated sewage sludge were used to calibrate the new function, while three fly ash concentrations were used (40, 150 and 350mg/L) for validation. Three models for accumulated methane volume (the modified Gompertz equation, the logistic function, and the transfer function) were evaluated. The results showed that methane production increased in the presence of FA when the sewage sludge was not pre-treated, while with pretreated sludge there is inhibition of methane production at FA concentrations higher than 50mg/L. In the calibration of the proposed function, it fits well with the experimental data under all the conditions, including the inhibition and stimulating zones, with the values of the parameters of the methane production models falling in the range of those reported in the literature. For validation experiments, the model succeeded in representing the behavior of new experiments in both the stimulating and inhibiting zones, with NRMSE and R 2 ranging from 0.3577 to 0.03714 and 0.2209 to 0.9911, respectively. Thus, the proposed model is robust and valid for the studied conditions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. A surplus production model including environmental effects: Application to the Senegalese white shrimp stocks

    Science.gov (United States)

    Thiaw, Modou; Gascuel, Didier; Jouffre, Didier; Thiaw, Omar Thiom

    2009-12-01

    In Senegal, two stocks of white shrimp ( Penaeusnotialis) are intensively exploited, one in the north and another in the south. We used surplus production models including environmental effects to analyse their changes in abundance over the past 10 years and to estimate their Maximum Sustainable Yield (MSY) and the related fishing effort ( EMSY). First, yearly abundance indices were estimated from commercial statistics using GLM techniques. Then, two environmental indices were alternatively tested in the model: the coastal upwelling intensity from wind speeds provided by the SeaWifs database and the primary production derived from satellite infrared images of chlorophyll a. Models were fitted, with or without the environmental effect, to the 1996-2005 time series. They express stock abundance and catches as functions of the fishing effort and the environmental index (when considered). For the northern stock, fishing effort and abundance fluctuate over the period without any clear trends. The model based on the upwelling index explains 64.9% of the year-to-year variability. It shows that the stock was slightly overexploited in 2002-2003 and is now close to full exploitation. Stock abundance strongly depends on environmental conditions; consequently, the MSY estimate varies from 300 to 900 tons according to the upwelling intensity. For the southern stock, fishing effort has strongly increased over the past 10 years, while abundance has been reduced 4-fold. The environment has a significant effect on abundance but only explains a small part of the year-to-year variability. The best fit is obtained using the primary production index ( R2 = 0.75), and the stock is now significantly overfished regardless of environmental conditions. MSY varies from 1200 to 1800 tons according to environmental conditions. Finally, in northern Senegal, the upwelling is highly variable from year to year and constitutes the major factor determining productivity. In the south, hydrodynamic

  3. Donation return time at fixed and mobile donation sites

    Science.gov (United States)

    Carey, Patricia M.; High, Patrick M.; Schlumpf, Karen S.; Johnson, Bryce R.; Mast, Alan E.; Rios, Jorge A.; Simon, Toby L.; Wilkinson, Susan L.

    2013-01-01

    BACKGROUND This study investigated the effect of blood donation environment, fixed or mobile with differing sponsor types, on donation return time. STUDY DESIGN AND METHODS Data from 2006 through 2009 at six US blood centers participating in the Retrovirus Epidemiology Donor Study-II (REDS-II) were used for analysis. Descriptive statistics stratified by whole blood (WB), plateletpheresis (PP), and double red blood cell (R2) donations were obtained for fixed and mobile locations, including median number of donations and median interdonation interval. A survival analysis estimated median return time at fixed and mobile sites, while controlling for censored return times, demographics, blood center, and mandatory recovery times. RESULTS Two-thirds (67.9%) of WB donations were made at mobile sites, 97.4% of PP donations were made at fixed sites, and R2 donations were equally distributed between fixed and mobile locations. For donations at fixed sites only or alternating between fixed and mobile sites, the highest median numbers of donations were nine and eight, respectively, and the shortest model-adjusted median return times (controlling for mandatory eligibility times of 56 and 112 days) were 36 and 30 days for WB and R2 donations, respectively. For PP donations, the shortest model-adjusted median return time was 23 days at a fixed location and the longest was 693 days at community locations. CONCLUSION WB, PP, and R2 donors with the shortest time between donations were associated with fixed locations and those alternating between fixed and mobile locations, even after controlling for differing mandatory recovery times for the different blood donation procedures. PMID:21745215

  4. Cooling Strategies for Vane Leading Edges in a Syngas Environment Including Effects of Deposition and Turbulence

    Energy Technology Data Exchange (ETDEWEB)

    Ames, Forrest [Univ. of North Dakota, Grand Forks, ND (United States); Bons, Jeffrey [Univ. of North Dakota, Grand Forks, ND (United States)

    2014-09-30

    The Department of Energy has goals to move land based gas turbine systems to alternate fuels including coal derived synthetic gas and hydrogen. Coal is the most abundant energy resource in the US and in the world and it is economically advantageous to develop power systems which can use coal. Integrated gasification combined cycles are (IGCC) expected to allow the clean use of coal derived fuels while improving the ability to capture and sequester carbon dioxide. These cycles will need to maintain or increase turbine entry temperatures to develop competitive efficiencies. The use of coal derived syngas introduces a range of potential contaminants into the hot section of the gas turbine including sulfur, iron, calcium, and various alkali metals. Depending on the effectiveness of the gas clean up processes, there exists significant likelihood that the remaining materials will become molten in the combustion process and potentially deposit on downstream turbine surfaces. Past evidence suggests that deposition will be a strong function of increasing temperature. Currently, even with the best gas cleanup processes a small level of particulate matter in the syngas is expected. Consequently, particulate deposition is expected to be an important consideration in the design of turbine components. The leading edge region of first stage vanes most often have higher deposition rates than other areas due to strong fluid acceleration and streamline curvature in the vicinity of the surface. This region remains one of the most difficult areas in a turbine nozzle to cool due to high inlet temperatures and only a small pressure ratio for cooling. The leading edge of a vane often has relatively high heat transfer coefficients and is often cooled using showerhead film cooling arrays. The throat of the first stage nozzle is another area where deposition potentially has a strongly adverse effect on turbine performance as this region meters the turbine inlet flow. Based on roughness

  5. Does Community Context Have an Important Impact on Divorce Risk? A Fixed-Effects Study of Twenty Norwegian First-Marriage Cohorts

    Science.gov (United States)

    2011-01-01

    The decision to divorce may be affected by the characteristics of the local community. Community characteristics may be barriers to divorce, or they may increase the attractiveness of divorcing (e.g., access to a good remarriage market), but our knowledge of such influences is sparse. This study examines two such community-level factors: socio-economic conditions and the local marriage market. In this study, discrete-time hazard models with community-level fixed effects are estimated using register-based data on Norwegian first marriages during the period from 1980 to 1999, with longitudinal information on both the community and couple levels (N = 283,493). The results show that there are important community-level influences on couples’ divorce risk, but these change dramatically when fixed effects are introduced. PMID:21350587

  6. Comparative effect of fixed dose combination of Amlodipine + Bisoprolol versus Amlodipine and Bisoprolol alone on blood pressure in stage-2 essential hypertensive patients.

    Directory of Open Access Journals (Sweden)

    Shirure PA,Tadvi NA, Bajait CS, Baig MS, Gade PR

    2012-09-01

    Full Text Available Background: Employment of low dose combinations of two antihypertensives, with different mode of action has gained acceptance worldwide for the treatment of mild to moderate hypertension. However, most studies in hypertensive disease have focused on monotherapy. The combination therapy in the treatment of hypertension is largely extrapolated from these monotherapy studies. Objectives: To study and compare the effect of amlodipine, bisoprolol and fixed dose combination of amlodipine + bisoprolol on blood pressure in stage-2 essential hypertensive patients. Methods: The present study was carried out in Department of Pharmacology in collaboration with Department of Medicine at Government Medical College and Hospital, Aurangabad. Results and Conclusion : Amlodipine + bisoprolol in fixed dose combination have showed significant blood pressure control in patients of stage-2 essential hypertension and the antihypertensive effect was greater than individual monotherapy study groups.

  7. Study of Anti-Fatigue Effect in Rats of Ferrous Chelates Including Hairtail Protein Hydrolysates

    Directory of Open Access Journals (Sweden)

    Saibo Huang

    2015-12-01

    Full Text Available The ability of ferrous chelates including hairtail protein hydrolysates to prevent and reduce fatigue was studied in rats. After hydrolysis of hairtail surimi with papain, the hairtail protein hydrolysates (HPH were separated into three groups by range of relative molecular weight using ultrafiltration membrane separation. Hairtail proteins were then chelated with ferrous ions, and the antioxidant activity, the amino acid composition and chelation rate of the three kinds of ferrous chelates including hairtail protein hydrolysates (Fe-HPH were determined. Among the three groups, the Fe-HPH chelate showing the best conditions was selected for the anti-fatigue animal experiment. For it, experimental rats were randomly divided into seven groups. Group A was designated as the negative control group given distilled water. Group B, the positive control group, was given glutathione. Groups C, D and E were designated as the Fe-HPH chelate treatment groups and given low, medium, and high doses, respectively. Group F was designated as HPH hydrolysate treatment group, and Group G was designated as FeCl2 treatment group. The different diets were orally administered to rats for 20 days. After that time, rats were subjected to forced swimming training after 1 h of gavage. Rats given Fe-FPH chelate had higher haemoglobin regeneration efficiency (HRE, longer exhaustive swimming time and higher SOD activity. Additionally, Fe-FPH chelate was found to significantly decrease the malondialdehyde content, visibly enhance the GSH-Px activity in liver and reduce blood lactic acid of rats. Fe-HPH chelate revealed an anti-fatigue effect, similar to or better than the positive control substance and superior to HPH or Fe when provided alone.

  8. In vitro effectiveness of Castellani solution including various ingredients against different microorganisms

    Directory of Open Access Journals (Sweden)

    Şükran Çopur

    2013-09-01

    Full Text Available Objective: As the external auditory canal is a moisturearea, it facilitates the growth of bacteria and fungi. Infectionsand inflammation due to Staphylococcus aureus,Pseudomonas aeruginosa, Aspergillus spp. and Candidaalbicans can develop in this area. Classical Castellanisolution including boric acid, fenol, fucsin, resorcinol, acetone,and alcohol is used for external ear tract infectionsdue to fungi and bacteria, and also for the superficial dermatophytoses,and eczematous dermatitis of the externalear tract infections.The purpose of this study is to investigate of the in vitroeffectiveness of classical Castellani solution and its differentformulations with different dilutions against the standardyeast and bacteria strains.Methods: C. albicans ATCC 10231, C. krusei ATCC6258, C. dubliniensis CD 36, C. guilliermondii ATCC6260, C. parapsilosis ATCC22019, E. coli ATCC 25922,P. aeruginosa ATCC 27853, MRSA ATCC 43300, Staphylococcusaureus ATCC 25923, and S. epidermidis ATCC12228 strains were included in the study. Broth microdilutionmethod was used for each microorganism and Castellaniformulation. The tests are repeated at least twice.Results: The inhibitory concentration of classical Castellanisolution against bacteria and fungi is 1/64-1/256,1/32-1/64 for fuchsin free solution, 1/32-1/128 for boricacid-free solution and, 1/64-1/128 for resorcinol-free solution.Conclusions: As a conclusion we think that the classicalCastellani solution and its different formulations at variousdilutions may be effective antimicrobial agents for differentpatient populations. J Clin Exp Invest 2013; 4 (3:302-305Key words: Castellani solution, antimicrobial activity, in vitro

  9. Fixed term employment

    International Nuclear Information System (INIS)

    Durant, B.W.; Schonberner, M.J.

    1999-01-01

    A series of brief notes were included with this presentation which highlighted certain aspects of contract management. Several petroleum companies have realized the benefits of taking advantage of contract personnel to control fixed G and A, manage the impacts on their organization, contain costs, to manage termination costs, and to fill gaps in lean personnel rosters. An independent contractor was described as being someone who is self employed, often with a variety of work experiences. The tax benefits and flexibility of contractor personnel were also described. Some liability aspects of hiring an independent contractor were also reviewed. The courts have developed the following 4 tests to help determine whether an individual is an employee or an independent contractor: (1) the control test, (2) the business integration test, (3) specific result test, and (4) the economic reality test

  10. Antagonism at combined effects of chemical fertilizers and carbamate insecticides on the rice-field N2-fixing cyanobacterium Cylindrospermum sp. in vitro

    OpenAIRE

    Padhy Rabindra N.; Nayak Nabakishore; Rath Shakti

    2014-01-01

    Effects of chemical fertilizers (urea, super phosphate and potash) on toxicities of two carbamate insecticides, carbaryl and carbofuran, individually to the N2-fixing cyanobacterium, Cylindrospermum sp. were studied in vitro at partially lethal levels (below highest permissive concentrations) of each insecticide. The average number of vegetative cells between two polar heterocysts was 16.3 in control cultures, while the mean value of filament length increased in the presence of chemical ferti...

  11. SU-F-J-86: Method to Include Tissue Dose Response Effect in Deformable Image Registration

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, J; Liang, J; Chen, S; Qin, A; Yan, D [Beaumont Health Systeml, Royal Oak, MI (United States)

    2016-06-15

    . Without including this effect in DIR, treatment dose in normal organ could be underestimated affecting treatment evaluation and planning modification. Acknowledgement: Partially Supported by Elekta Research Grant.

  12. CARBON FIXING CAPACITY OF AMAZONIAN SOILS IN RELATION TO ITS DEGRADATION CONDITIONS

    OpenAIRE

    Clara Patricia Peña Venegas; Edmundo Rafael Mendoza Olmos; Carlos Hernando Rodríguez León; Gladys Inés Cardona Vanegas; Bernardo Eusebio Betancurt Parra; Maolenmarx Tatiana Garzón Gómez

    2015-01-01

    Amazonian deforestation and transformation alert about their effects worldwide. One concern is the increase of the Carbon (C) levels emitted. Previous works have estimated the fixed C in Amazon forests without including the C stored in soils. Within soil, the organic carbon molecules are highly sensitive to degradation, affecting the natural capacity of soils to fix and store C. The present study evaluates the impact of degradation in the natural capacity of Amazon soils to fix C. Thirty five...

  13. Long-term skeletal effects of high-pull headgear followed by fixed appliances for the treatment of Class II malocclusions.

    Science.gov (United States)

    Bilbo, E Erin; Marshall, Steven D; Southard, Karin A; Allareddy, Verrasathpurush; Holton, Nathan; Thames, Allyn M; Otsby, Marlene S; Southard, Thomas E

    2018-04-18

    The long-term skeletal effects of Class II treatment in growing individuals using high-pull facebow headgear and fixed edgewise appliances have not been reported. The purpose of this study was to evaluate the long-term skeletal effects of treatment using high-pull headgear followed by fixed orthodontic appliances compared to an untreated control group. Changes in anteroposterior and vertical cephalometric measurements of 42 Class II subjects (n = 21, mean age = 10.7 years) before treatment, after headgear correction to Class I molar relationship, after treatment with fixed appliances, and after long-term retention (mean 4.1 years), were compared to similar changes in a matched control group (n = 21, mean age = 10.9 years) by multivariable linear regression models. Compared to control, the study group displayed significant long-term horizontal restriction of A-point (SNA = -1.925°, P appliances resulted in correction to Class I molar through restriction of horizontal maxillary growth with continued horizontal mandibular growth and vertical skeletal changes unaffected. The anteroposterior molar correction and skeletal effects of this treatment were stable long term.

  14. Modeling of in-vessel fission product release including fuel morphology effects for severe accident analyses

    International Nuclear Information System (INIS)

    Suh, K.Y.

    1989-10-01

    A new in-vessel fission product release model has been developed and implemented to perform best-estimate calculations of realistic source terms including fuel morphology effects. The proposed bulk mass transfer correlation determines the product of fission product release and equiaxed grain size as a function of the inverse fuel temperature. The model accounts for the fuel-cladding interaction over the temperature range between 770 K and 3000 K in the steam environment. A separate driver has been developed for the in-vessel thermal hydraulic and fission product behavior models that were developed by the Department of Energy for the Modular Accident Analysis Package (MAAP). Calculational results of these models have been compared to the results of the Power Burst Facility Severe Fuel Damage tests. The code predictions utilizing the mass transfer correlation agreed with the experimentally determined fractional release rates during the course of the heatup, power hold, and cooldown phases of the high temperature transients. Compared to such conventional literature correlations as the steam oxidation model and the NUREG-0956 correlation, the mass transfer correlation resulted in lower and less rapid releases in closer agreement with the on-line and grab sample data from the Severe Fuel Damage tests. The proposed mass transfer correlation can be applied for best-estimate calculations of fission products release from the UO 2 fuel in both nominal and severe accident conditions. 15 refs., 10 figs., 2 tabs

  15. Fatigue evaluation including environmental effects for primary circuit components in nuclear power plants

    International Nuclear Information System (INIS)

    Seichter, Johannes; Reese, Sven H.; Klucke, Dietmar

    2013-01-01

    The influence of LWR coolant environment to the lifetime of materials in Nuclear Power Plants is in discussion internationally. Environmental phenomena were investigated in laboratory tests and published in recent years. The discussion is mainly focused both on the transition from laboratory to real plant components and on numerical calculation procedures. Since publishing of the NUREG/CR-6909 report in 2007, formulae for calculating the Fen factors have been modified several times. Various calculation procedures like the so called 'Strain-integrated Method' and 'Simplified Approach' have been published while each approach yields to different results. The recent revision of the calculation procedure, proposed by ANL in 2012, is presented and discussed with regard to possible variations in the results depending on the assumptions made. In German KTA Rules the effect of environmentally assisted fatigue (EAF) is taken into account by means of so called attention thresholds. If the threshold value is exceeded, further measures like NDT, in-service inspections including fracture mechanical evaluations or detailed assessment procedures have to be performed. One way to handle those measures is to apply sophisticated procedures and to show that the calculated CUF is below the defined attention thresholds. On the basis of a practical example, methods and approaches will be discussed and recommendations in terms of avoiding over-conservatism and misinterpretation will be presented.

  16. Fatigue evaluation including environmental effects for primary circuit components in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Seichter, Johannes [Siempelkamp Pruef- und Gutachter-Gesellschaft mbH, Dresden (Germany); Reese, Sven H.; Klucke, Dietmar [Component Technology Global Unit Generation, E.ON Kernkraft GmbH, Hannover (Germany)

    2013-05-15

    The influence of LWR coolant environment to the lifetime of materials in Nuclear Power Plants is in discussion internationally. Environmental phenomena were investigated in laboratory tests and published in recent years. The discussion is mainly focused both on the transition from laboratory to real plant components and on numerical calculation procedures. Since publishing of the NUREG/CR-6909 report in 2007, formulae for calculating the Fen factors have been modified several times. Various calculation procedures like the so called 'Strain-integrated Method' and 'Simplified Approach' have been published while each approach yields to different results. The recent revision of the calculation procedure, proposed by ANL in 2012, is presented and discussed with regard to possible variations in the results depending on the assumptions made. In German KTA Rules the effect of environmentally assisted fatigue (EAF) is taken into account by means of so called attention thresholds. If the threshold value is exceeded, further measures like NDT, in-service inspections including fracture mechanical evaluations or detailed assessment procedures have to be performed. One way to handle those measures is to apply sophisticated procedures and to show that the calculated CUF is below the defined attention thresholds. On the basis of a practical example, methods and approaches will be discussed and recommendations in terms of avoiding over-conservatism and misinterpretation will be presented.

  17. Representation-free description of light-pulse atom interferometry including non-inertial effects

    Energy Technology Data Exchange (ETDEWEB)

    Kleinert, Stephan, E-mail: stephan.kleinert@uni-ulm.de [Institut für Quantenphysik and Center for Integrated Quantum Science and Technology (IQST), Universität Ulm, Albert-Einstein-Allee 11, D-89081 Ulm (Germany); Kajari, Endre; Roura, Albert [Institut für Quantenphysik and Center for Integrated Quantum Science and Technology (IQST), Universität Ulm, Albert-Einstein-Allee 11, D-89081 Ulm (Germany); Schleich, Wolfgang P. [Institut für Quantenphysik and Center for Integrated Quantum Science and Technology (IQST), Universität Ulm, Albert-Einstein-Allee 11, D-89081 Ulm (Germany); Texas A& M University Institute for Advanced Study (TIAS), Institute for Quantum Science and Engineering (IQSE) and Department of Physics and Astronomy, Texas A& M University College Station, TX 77843-4242 (United States)

    2015-12-30

    Light-pulse atom interferometers rely on the wave nature of matter and its manipulation with coherent laser pulses. They are used for precise gravimetry and inertial sensing as well as for accurate measurements of fundamental constants. Reaching higher precision requires longer interferometer times which are naturally encountered in microgravity environments such as drop-tower facilities, sounding rockets and dedicated satellite missions aiming at fundamental quantum physics in space. In all those cases, it is necessary to consider arbitrary trajectories and varying orientations of the interferometer set-up in non-inertial frames of reference. Here we provide a versatile representation-free description of atom interferometry entirely based on operator algebra to address this general situation. We show how to analytically determine the phase shift as well as the visibility of interferometers with an arbitrary number of pulses including the effects of local gravitational accelerations, gravity gradients, the rotation of the lasers and non-inertial frames of reference. Our method conveniently unifies previous results and facilitates the investigation of novel interferometer geometries.

  18. Integrated Sachs-Wolfe effect in a quintessence cosmological model: Including anisotropic stress of dark energy

    International Nuclear Information System (INIS)

    Wang, Y. T.; Xu, L. X.; Gui, Y. X.

    2010-01-01

    In this paper, we investigate the integrated Sachs-Wolfe effect in the quintessence cold dark matter model with constant equation of state and constant speed of sound in dark energy rest frame, including dark energy perturbation and its anisotropic stress. Comparing with the ΛCDM model, we find that the integrated Sachs-Wolfe (ISW)-power spectrums are affected by different background evolutions and dark energy perturbation. As we change the speed of sound from 1 to 0 in the quintessence cold dark matter model with given state parameters, it is found that the inclusion of dark energy anisotropic stress makes the variation of magnitude of the ISW source uncertain due to the anticorrelation between the speed of sound and the ratio of dark energy density perturbation contrast to dark matter density perturbation contrast in the ISW-source term. Thus, the magnitude of the ISW-source term is governed by the competition between the alterant multiple of (1+3/2xc-circumflex s 2 ) and that of δ de /δ m with the variation of c-circumflex s 2 .

  19. Management of demand in the NHS, including the effects of queues and pensioners.

    Science.gov (United States)

    Groocock, J

    1999-01-01

    Discusses the methods used in the NHS to bring demand into balance with supply. People with minor illnesses try self-treatments and alternative medicine. Systematic programs to identify ill people are applied to only a few illnesses. Waiting lists for elective surgery cause some richer people to take their demand to private hospitals. An analysis of such waiting lists shows that, other than this, queues are not a method of rationing but are just the effect of bad management of the actual methods, which are then discussed. The same methods are used to ration access to specialist physicians. Providing extra resources would eliminate queues only if another condition was satisfied. It is argued that providing fully adequate medical care for patients of working age, although expensive, might produce a net economic gain, whereas all care for pensioners, including medical care, gives a net economic loss. Therefore it may not be sensible for people to have inadequate medical care for the first 65 years of their lives just because it is economically impracticable for them to have fully adequate medical care when they are pensioners.

  20. Multiple mutualist effects on genomewide expression in the tripartite association between Medicago truncatula, nitrogen-fixing bacteria and mycorrhizal fungi.

    Science.gov (United States)

    Afkhami, Michelle E; Stinchcombe, John R

    2016-10-01

    While all species interact with multiple mutualists, the fitness consequences and molecular mechanisms underlying these interactions remain largely unknown. We combined factorial ecological experiments with genomewide expression analyses to examine the phenotypic and transcriptomic responses of model legume Medicago truncatula to rhizobia and mycorrhizal fungi. We found synergistic effects of these mutualists on plant performance and examined unique features of plant gene expression responses to multiple mutualists. There were genomewide signatures of mutualists and multiple mutualists on expression, with partners often affecting unique sets of genes. Mycorrhizal fungi had stronger effects on plant expression than rhizobia, with 70% of differentially expressed genes affected by fungi. Fungal and bacterial mutualists had joint effects on 10% of differentially expressed genes, including unexpected, nonadditive effects on some genes with important functions such as nutrient metabolism. For a subset of genes, interacting with multiple mutualists even led to reversals in the direction of expression (shifts from up to downregulation) compared to interacting with single mutualists. Rhizobia also affected the expression of several mycorrhizal genes, including those involved in nutrient transfer to host plants, indicating that partner species can also impact each other's molecular phenotypes. Collectively, these data illustrate the diverse molecular mechanisms and transcriptional responses associated with the synergistic benefits of multiple mutualists. © 2016 John Wiley & Sons Ltd.

  1. [Effects of legume-oat intercropping on abundance and community structure of soil N2-fixing bacteria].

    Science.gov (United States)

    Yang, Ya Dong; Feng, Xiao Min; Hu, Yue Gao; Ren, Chang Zhong; Zeng, Zhao Hai

    2017-03-18

    In this study, real-time PCR and high-throughput sequencing approaches were employed to investigate the abundance and community structure of N 2 -fixing bacteria in a field experiment with three planting patterns (Oat monoculture, O; Soybean-oat intercropping, OSO; Mung bean-oat intercropping, OMO). The results showed that soil chemical properties varied significantly in different soil samples (P<0.05). The abundance of nifH gene varied from 1.75×10 10 to 7.37×10 10 copies·g -1 dry soil in all soil samples. The copy numbers of nifH gene in OSO and OMO were 2.18, 2.64, and 1.92, 2.57 times as much as that in O at jointing and mature stages, with a significant decline from jointing to mature stage for all treatments (P<0.05). Rarefaction curve and cove-rage results proved the nifH gene sequencing results were reliable, and the diversity index showed that the N 2 -fixing bacteria diversity of OSO was much higher than that of O. Azohydromonas, Azotobacter, Bradyrhizobium, Skermanella and other groups that could not be classified are the dominant genera, with significant differences in proportion of these dominant groups observed among all soil samples (P<0.05). Venn and PCA analysis indicated that there were greater differences of nifH gene communities between jointing and mature stages; however, the OSO and OMO had similar communities in both stages. All these results confirmed that legume-oat intercropping significantly increased the abundance and changed the community composition of N 2 -fixing bacteria in oat soils.

  2. Motion as perturbation. II. Development of the method for dosimetric analysis of motion effects with fixed-gantry IMRT

    Energy Technology Data Exchange (ETDEWEB)

    Nelms, Benjamin E. [Canis Lupus LLC, Merrimac, Wisconsin 53561 (United States); Opp, Daniel; Zhang, Geoffrey; Moros, Eduardo; Feygelman, Vladimir, E-mail: vladimir.feygelman@moffitt.org [Department of Radiation Oncology, Moffitt Cancer Center, Tampa, Florida 33612 (United States)

    2014-06-15

    Purpose: In this work, the feasibility of implementing a motion-perturbation approach to accurately estimate volumetric dose in the presence of organ motion—previously demonstrated for VMAT-–is studied for static gantry IMRT. The method's accuracy is improved for the voxels that have very low planned dose but acquire appreciable dose due to motion. The study describes the modified algorithm and its experimental validation and provides an example of a clinical application. Methods: A contoured region-of-interest is propagated according to the predefined motion kernel throughout time-resolved 4D phantom dose grids. This timed series of 3D dose grids is produced by the measurement-guided dose reconstruction algorithm, based on an irradiation of a staticARCCHECK (AC) helical dosimeter array (Sun Nuclear Corp., Melbourne, FL). Each moving voxel collects dose over the dynamic simulation. The difference in dose-to-moving voxel vs dose-to-static voxel in-phantom forms the basis of a motion perturbation correction that is applied to the corresponding voxel in the patient dataset. A new method to synchronize the accelerator and dosimeter clocks, applicable to fixed-gantry IMRT, was developed. Refinements to the algorithm account for the excursion of low dose voxels into high dose regions, causing appreciable dose increase due to motion (LDVE correction). For experimental validation, four plans using TG-119 structure sets and objectives were produced using segmented IMRT direct machine parameters optimization in Pinnacle treatment planning system (v. 9.6, Philips Radiation Oncology Systems, Fitchburg, WI). All beams were delivered with the gantry angle of 0°. Each beam was delivered three times: (1) to the static AC centered on the room lasers; (2) to a static phantom containing a MAPCHECK2 (MC2) planar diode array dosimeter (Sun Nuclear); and (3) to the moving MC2 phantom. The motion trajectory was an ellipse in the IEC XY plane, with 3 and 1.5 cm axes. The period

  3. Correlation or causation? Income inequality and infant mortality in fixed effects models in the period 1960-2008 in 34 OECD countries.

    Science.gov (United States)

    Avendano, Mauricio

    2012-08-01

    Income inequality is strongly associated with infant mortality across countries, but whether this association is causal has not been established. In their commentary in this issue of Social Science & Medicine, Regidor et al. (2012) argue that this association has disappeared in recent years, and question the premise of a causal link. This paper empirically tests the impact of income inequality on infant mortality in a fixed effects model that exploits the evolution of income inequality over a 38-year period, controlling for all time-invariant differences across countries. Data came from the Standardized World Income Inequality Database, containing yearly estimates for the period 1960-2008 in 34 countries member of the Organization for Economic Co-operation and Development (OECD), linked to infant mortality data from the OECD Health database. Infant mortality was modelled as a function of income inequality in a country and year fixed effects model, incorporating controls for changing economic and labour conditions. In a model without country fixed effects, a one-point increase in the Gini coefficient was associated with a 7% increase in the infant mortality rate (Rate ratio[RR] = 1.07, 95% Confidence Interval [CI] 1.04, 1.09). Controlling for differences across countries in a country fixed effects model, however, income inequality was no longer associated with infant mortality (RR = 1.00, 0.98, 1.01). Similar results were obtained when using lagged values of income inequality for up to 15 years, and in models that controlled for changing labour and economic conditions. Findings suggest that in the short-run, changes in income inequality are not associated with changes in infant mortality. A possible interpretation of the discrepancy between cross-country correlations and fixed effects models is that social policies that reduce infant mortality cluster in countries with low income inequality, but their effects do not operate via income. Findings highlight the

  4. NEPA, a new fixed combination of netupitant and palonosetron, is a cost-effective intervention for the prevention of chemotherapy-induced nausea and vomiting in the UK

    Directory of Open Access Journals (Sweden)

    Helene Cawston

    2017-03-01

    Full Text Available Background: The objective was to evaluate the cost-effectiveness of NEPA, an oral fixed combination netupitant (NETU, 300 mg and palonosetron (PA, 0.5 mg compared with aprepitant and palonosetron (APPA or palonosetron (PA alone, to prevent chemotherapy-induced nausea and vomiting (CINV in patients undergoing treatment with highly or moderately emetogenic chemotherapy (HEC or MEC in the UK. Scope: A systematic literature review and meta-analysis were undertaken to compare NEPA with currently recommended anti-emetics. Relative effectiveness was estimated over the acute (day 1 and overall treatment (days 1–5 phases, taking complete response (CR, no emesis and no rescue medication and complete protection (CP, CR and no more than mild nausea [VAS scale <25 mm] as primary efficacy outcomes. A three-health-state Markov cohort model, including CP, CR and incomplete response (no CR for HEC and MEC, was constructed. A five-day time horizon and UK NHS perspective were adopted. Transition probabilities were obtained by combining the response rates of CR and CP from NEPA trials and odds ratios from the meta-analysis. Utilities of 0.90, 0.70 and 0.24 were defined for CP, CR and incomplete response, respectively. Costs included medications and management of CINV-related events and were obtained from the British National Formulary and NHS Reference Costs. The expected budgetary impact of NEPA was also evaluated. Findings: In HEC patients, the NEPA strategy was more effective than APPA (quality-adjusted life days [QALDs] of 4.263 versus 4.053; incremental emesis-free and CINV-free days of +0.354 and +0.237, respectively and was less costly (£80 versus £124, resulting in NEPA being the dominant strategy. In MEC patients, NEPA was cost effective, cumulating in an estimated 0.182 extra QALDs at an incremental cost of £6.65 compared with PA. Conclusion: Despite study limitations (study setting, time horizon, utility measure, the results suggest NEPA is cost

  5. A simple and cost-effective method of DNA extraction from small formalin-fixed paraffin-embedded tissue for molecular oncologic testing.

    Science.gov (United States)

    Snow, Anthony N; Stence, Aaron A; Pruessner, Jonathan A; Bossler, Aaron D; Ma, Deqin

    2014-01-01

    Extraction of DNA from formalin-fixed, paraffin-embedded (FFPE) tissue is a critical step in molecular oncologic testing. As molecular oncology testing becomes more important for prognostic and therapeutic decision making and tissue specimens become smaller due to earlier detection of suspicious lesions and the use of fine needle aspiration methods for tissue collection, it becomes more challenging for the typical molecular pathology laboratory to obtain reliable test results. We developed a DNA extraction method to obtain sufficient quantity and high quality genomic DNA from limited FFPE tissue for molecular oncology testing using a combination of H&E stained slides, a matrix capture method and the Qiagen DNA column. THREE DNA EXTRACTION METHODS WERE COMPARED: our standard procedure of manually scraping tissue from unstained slides followed by DNA extraction using the QIAamp FFPE column (Qiagen, Valencia, CA), a glue capture method (Pinpoint Solution, Zymo Research Corp, Inc) on H&E stained slides followed by DNA extraction using either the QIAamp column or the column included with the Pinpoint kit (Zymo Research). The DNA extraction protocol was optimized. Statistical analysis was performed using the paired two-sample student's t-test. The combination of the matrix capture method with the QIAamp column gave an equivalent amount of DNA as our standard extraction method using the unstained slides and a 4.6-fold higher DNA yield than using the Zymo column included in the Pinpoint Slide Solution kit. Several molecular tests were performed and DNA purified using the new method gave the same results as for the previous methods. Using H&E stained slides allows visual confirmation of tumor cells during microdissection. The Pinpoint solution made removal of specific tissue from the slides easier and reduced the risk of contamination and tissue loss. This DNA extraction method is simple, cost-effective, and blends with our current workflow requiring no additional equipment.

  6. Long-term effect of latanoprost/timolol fixed combination in patients with glaucoma or ocular hypertension: A prospective, observational, noninterventional study

    Directory of Open Access Journals (Sweden)

    Schwenn Oliver

    2010-09-01

    Full Text Available Abstract Background Prospective, observational studies that enroll large numbers of patients with few exclusion criteria may better reflect actual ongoing clinical experience than randomized clinical trials. Our purpose was to obtain efficacy and safety information from a cohort of subjects exposed to latanoprost/timolol fixed combination (FC for ≥18 months using a prospective, observational design. Methods In all, 577 office-based ophthalmologists in Germany switched 2339 patients with glaucoma or ocular hypertension to latanoprost/timolol FC for medical reasons. Follow-up visits were scheduled for every 6 months over 24 months; physicians followed usual care routines. Intraocular pressure (IOP, visual field status, optic nerve head findings, and adverse events were recorded. Efficacy parameters were evaluated for the per protocol (PP population; the safety population included subjects receiving ≥1 drop of FC. Physicians rated efficacy, tolerability, and subject compliance at month 24. Results Of the 2339 subjects switched to latanoprost/timolol FC (safety population, the primary reasons for switching were inadequate IOP reduction (78.2% and desire to simplify treatment with once-daily dosing (29.4%; multiple reasons possible. In all, 1317 (56.3% subjects completed the study, and 1028 (44.0% were included in the PP population. Most discontinuations were due to loss to follow-up. Change in mean IOP from baseline to month 6 was -4.0 ± 4.31 mmHg, a reduction that was maintained throughout (P Conclusions Over 24 months, latanoprost/timolol FC effectively lowers IOP levels and is well tolerated in patients with glaucoma or ocular hypertension who change from their previous ocular hypotensive therapy for medical reasons. Investigator assessments found optic disc parameters and visual field to be stable throughout 24 months of follow-up.

  7. Effect of incorporation of nitrogen atoms in Al2O3 gate dielectric of wide-bandgap-semiconductor MOSFET on gate leakage current and negative fixed charge

    Science.gov (United States)

    Kojima, Eiji; Chokawa, Kenta; Shirakawa, Hiroki; Araidai, Masaaki; Hosoi, Takuji; Watanabe, Heiji; Shiraishi, Kenji

    2018-06-01

    We performed first-principle calculations to investigate the effect of incorporation of N atoms into Al2O3 gate dielectrics. Our calculations show that the defect levels generated by VO in Al2O3 are the origin of the stress-induced gate leakage current and that VOVAl complexes in Al2O3 cause negative fixed charge. We revealed that the incorporation of N atoms into Al2O3 eliminates the VO defect levels, reducing the stress-induced gate leakage current. Moreover, this suppresses the formation of negatively charged VOVAl complexes. Therefore, AlON can reduce both stress-induced gate leakage current and negative fixed charge in wide-bandgap-semiconductor MOSFETs.

  8. CERN: Fixed target targets

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1993-03-15

    Full text: While the immediate priority of CERN's research programme is to exploit to the full the world's largest accelerator, the LEP electron-positron collider and its concomitant LEP200 energy upgrade (January, page 1), CERN is also mindful of its long tradition of diversified research. Away from LEP and preparations for the LHC proton-proton collider to be built above LEP in the same 27-kilometre tunnel, CERN is also preparing for a new generation of heavy ion experiments using a new source, providing heavier ions (April 1992, page 8), with first physics expected next year. CERN's smallest accelerator, the LEAR Low Energy Antiproton Ring continues to cover a wide range of research topics, and saw a record number of hours of operation in 1992. The new ISOLDE on-line isotope separator was inaugurated last year (July, page 5) and physics is already underway. The remaining effort concentrates around fixed target experiments at the SPS synchrotron, which formed the main thrust of CERN's research during the late 1970s. With the SPS and LEAR now approaching middle age, their research future was extensively studied last year. Broadly, a vigorous SPS programme looks assured until at least the end of 1995. Decisions for the longer term future of the West Experimental Area of the SPS will have to take into account the heavy demand for test beams from work towards experiments at big colliders, both at CERN and elsewhere. The North Experimental Area is the scene of larger experiments with longer lead times. Several more years of LEAR exploitation are already in the pipeline, but for the longer term, the ambitious Superlear project for a superconducting ring (January 1992, page 7) did not catch on. Neutrino physics has a long tradition at CERN, and this continues with the preparations for two major projects, the Chorus and Nomad experiments (November 1991, page 7), to start next year in the West Area. Delicate neutrino oscillation effects could become visible for the first

  9. Competition effects in cation binding to humic acid: Conditional affinity spectra for fixed total metal concentration conditions

    Science.gov (United States)

    David, Calin; Mongin, Sandrine; Rey-Castro, Carlos; Galceran, Josep; Companys, Encarnació; Garcés, José Luis; Salvador, José; Puy, Jaume; Cecilia, Joan; Lodeiro, Pablo; Mas, Francesc

    2010-09-01

    Information on the Pb and Cd binding to a purified Aldrich humic acid (HA) is obtained from the influence of different fixed total metal concentrations on the acid-base titrations of this ligand. NICA (Non-Ideal Competitive Adsorption) isotherm has been used for a global quantitative description of the binding, which has then been interpreted by plotting the Conditional Affinity Spectra of the H + binding at fixed total metal concentrations (CAScTM). This new physicochemical tool, here introduced, allows the interpretation of binding results in terms of distributions of proton binding energies. A large increase in the acidity of the phenolic sites as the total metal concentration increases, especially in presence of Pb, is revealed from the shift of the CAScTM towards lower affinities. The variance of the CAScTM distribution, which can be used as a direct measure of the heterogeneity, also shows a significant dependence on the total metal concentration. A discussion of the factors that influence the heterogeneity of the HA under the conditions of each experiment is provided, so that the smoothed pattern exhibited by the titration curves can be justified.

  10. Effect of hydraulic retention time on hydrodynamic behavior of anaerobic-aerobic fixed bed reactor treating cattle slaughterhouse effluent

    Directory of Open Access Journals (Sweden)

    Daiane Cristina de Freitas

    2017-09-01

    Full Text Available The study of the hydrodynamic behavior in reactors provides characteristics of the flow regime and its anomalies that can reduce biological processes efficiency due to the decrease of the useful volume and the hydraulic retention time required for the performance of microbial activity. In this study, the hydrodynamic behavior of an anaerobic-aerobic fixed bed reactor, operated with HRT (hydraulic retention time of 24, 18 and 12 hours, was evaluated in the treatment of raw cattle slaughterhouse wastewater. Polyurethane foam and expanded clay were used as support media for biomass immobilization. Experimental data of pulse type stimulus-response assays were performed with eosin Y and bromophenol blue, and adjusted to the single-parameter theoretical models of dispersion and N-continuous stirred tank reactors in series (N-CSTR. N-CSTR model presented the best adjustment for the HRT and tracers evaluated. RDT (residence time distribution curves obtained with N-CSTR model in the assays with bromophenol blue resulted in better adjustment compared to the eosin Y. The predominant flow regime in AAFBR (anaerobic aerobic fixed bed reactor is the N-CSTR in series, as well as the existence of preferential paths and hydraulic short-circuiting.

  11. Evaluation of effects of laser irradiation therapy (λ=830 nm) on oral ulceration induced by fixed orthodontic appliances

    International Nuclear Information System (INIS)

    Rodrigues, Maria Teresa Jabur

    2001-01-01

    Twenty patients presenting fixed orthodontic appliance - induced oral ulceration were randomly chosen for this study. These patients were then divided into two groups. In Group ,1 the ulceration was submitted to low intensity infrared laser (λ=830 nm), at 30 mW fluency per point 1,3 J/cm 2 at an exposure time ranging from 3s to 33s, depending on ulceration size. Ulceration was irradiated on the first day, the process being repeated 24 and then 48 hours later. Evaluations were made seven days after the first irradiation. Group 2 comprised of patients who were exposed to conventional treatment where wax was used to cover the afflicted area. These patients also took triancinolona. Evaluation was made on the same day. In both groups the cause of irritation was eliminated whenever was possible. Clinical results pointed out that the healing process was slightly faster in cases of LILT treated oral ulceration. The latter also presented significant decrease in symptoms of pain. Comparative statistical evaluation results between both groups has shown that in the case of Group 1 patients (those submitted to low-intensity infrared laser beam): 1) Healing process was faster with reduction of sore areas; 2) immediate relief of pain following first irradiation, as stated by patients. Taking into consideration the vast amount of patients who are bearers of fixed orthodontic appliances and whose most usual and frequent complaint is pain and irritation, the use of LILT is highly recommended due to its simplicity and efficacy. (author)

  12. Effect of Mobile Phone Usage on Nickel Ions Release and pH of Saliva in Patients Undergoing Fixed Orthodontic Treatment.

    Science.gov (United States)

    Nanjannawar, Lalita Girish; Girme, Tejashree Suresh; Agrawal, Jiwanasha Manish; Agrawal, Manish Suresh; Fulari, Sangamesh Gurunath; Shetti, Shraddha Subhash; Kagi, Vishwal Ajith

    2017-09-01

    Hand held mobile phones are presently the most popular means of communication worldwide and have transformed our lives in many aspects. The widespread use of such devices have resulted in growing concerns regarding harmful effects of radiations emitted by them. This study was designed to evaluate the effects of mobile phone usage on nickel ion release as well as pH of saliva in patients with fixed orthodontic appliances. To assess the level of nickel ions in saliva and pH of saliva in mobile phone users undergoing fixed orthodontic treatment using inductively coupled plasma atomic emission spectrometry. A total of 42 healthy patients with fixed orthodontic appliance in mouth for a duration of six to nine months were selected for the study. They were divided into experimental group (n=21) consisting of mobile phone users and control group (n=21) of non mobile phone users. Saliva samples were collected from both the groups and nickel ion levels were measured using inductively coupled plasma-mass spectroscopy. The pH values were also assessed for both groups using pH meter. Unpaired t-test was used for the data analysis. Statistical analysis revealed that though the pH levels were reduced and the nickel ion levels were higher in the experimental group compared to the control group, the results were non significant. Mobile phone usage may affect the pH of saliva and result in increased release of nickel ions in saliva of patients with fixed orthodontic appliances in the oral cavity.

  13. Cost-effectiveness analysis of a fixed-dose combination of indacaterol and glycopyrronium as maintenance treatment for COPD

    Directory of Open Access Journals (Sweden)

    Chan M

    2018-04-01

    Full Text Available Ming-Cheng Chan,1,* Elise Chia-Hui Tan,2 Ming-Chin Yang3,* 1Section of Chest Medicine, Department of Internal Medicine, Taichung Veterans General Hospital, Taichung, Taiwan, Republic of China; 2National Research Institute of Chinese Medicine, Ministry of Health and Welfare, Taipei, Taiwan, Republic of China; 3Institute of Health Policy and Management, National Taiwan University, Taipei, Taiwan, Republic of China *These authors contributed equally to this work Objective: The aim of this study was to evaluate the cost-effectiveness of the long-acting beta-2 agonist (LABA/long-acting muscarinic antagonist (LAMA dual bronchodilator indacaterol/glycopyrronium (IND/GLY as a maintenance treatment for COPD patients from the perspective of health care payer in Taiwan. Patients and methods: We adopted a patient-level simulation model, which included a cohort of COPD patients aged ≥40 years. The intervention used in the study was the treatment using IND/GLY, and comparators were tiotropium or salmeterol/fluticasone combination (SFC. Data related to the efficacy of drugs, incidence of exacerbation, and utility were obtained from clinical studies. Direct costs were estimated from claims data based on the severity of COPD. The cycle length was 6 months (to match forced expiratory volume in 1 second [FEV1] data, and the time horizons included 1, 3, 5, 10 years, and lifetime. Deterministic and probabilistic sensitivity analyses were conducted to test the robustness of the model results. Costs were expressed in US dollars with a discount rate of 3.0%. Results: Compared to tiotropium and SFC, the incremental cost-effectiveness ratios (ICERs per quality-adjusted life year (QALY gained of patients treated with IND/GLY were US$5,987 and US$14,990, respectively. One-way sensitivity analysis revealed that the improvement in FEV1 provided by IND/GLY, the distribution of patients with regard to the severity of COPD, and acute exacerbation rate ratio were the key

  14. Distribution of variable vs fixed costs of hospital care.

    Science.gov (United States)

    Roberts, R R; Frutos, P W; Ciavarella, G G; Gussow, L M; Mensah, E K; Kampe, L M; Straus, H E; Joseph, G; Rydman, R J

    1999-02-17

    Most strategies proposed to control the rising cost of health care are aimed at reducing medical resource consumption rates. These approaches may be limited in effectiveness because of the relatively low variable cost of medical care. Variable costs (for medication and supplies) are saved if a facility does not provide a service while fixed costs (for salaried labor, buildings, and equipment) are not saved over the short term when a health care facility reduces service. To determine the relative variable and fixed costs of inpatient and outpatient care for a large urban public teaching hospital. Cost analysis. A large urban public teaching hospital. All expenditures for the institution during 1993 and for each service were categorized as either variable or fixed. Fixed costs included capital expenditures, employee salaries and benefits, building maintenance, and utilities. Variable costs included health care worker supplies, patient care supplies, diagnostic and therapeutic supplies, and medications. In 1993, the hospital had nearly 114000 emergency department visits, 40000 hospital admissions, 240000 inpatient days, and more than 500000 outpatient clinic visits. The total budget for 1993 was $429.2 million, of which $360.3 million (84%) was fixed and $68.8 million (16%) was variable. Overall, 31.5% of total costs were for support expenses such as utilities, employee benefits, and housekeeping salaries, and 52.4% included direct costs of salary for service center personnel who provide services to individual patients. The majority of cost in providing hospital service is related to buildings, equipment, salaried labor, and overhead, which are fixed over the short term. The high fixed costs emphasize the importance of adjusting fixed costs to patient consumption to maintain efficiency.

  15. Fuel rod fixing system

    International Nuclear Information System (INIS)

    Christiansen, D.W.

    1982-01-01

    This is a reusable system for fixing a nuclear reactor fuel rod to a support. An interlock cap is fixed to the fuel rod and an interlock strip is fixed to the support. The interlock cap has two opposed fingers, which are shaped so that a base is formed with a body part. The interlock strip has an extension, which is shaped so that this is rigidly fixed to the body part of the base. The fingers of the interlock cap are elastic in bending. To fix it, the interlock cap is pushed longitudinally on to the interlock strip, which causes the extension to bend the fingers open in order to engage with the body part of the base. To remove it, the procedure is reversed. (orig.) [de

  16. Modeling of Pem Fuel Cell Systems Including Controls and Reforming Effects for Hybrid Automotive Applications

    National Research Council Canada - National Science Library

    Boettner, Daisie

    2001-01-01

    .... This study develops models for a stand-alone Proton Exchange Membrane (PEM) fuel cell stack, a direct-hydrogen fuel cell system including auxiliaries, and a methanol reforming fuel cell system for integration into a vehicle performance simulator...

  17. Numerical and experimental studies on effects of moisture content on combustion characteristics of simulated municipal solid wastes in a fixed bed

    International Nuclear Information System (INIS)

    Sun, Rui; Ismail, Tamer M.; Ren, Xiaohan; Abd El-Salam, M.

    2015-01-01

    Highlights: • The effects of moisture content on the burning process of MSW are investigated. • A two-dimensional mathematical model was built to simulate the combustion process. • Temperature distributions, process rates, gas species were measured and simulated. • The The conversion ratio of C/CO and N/NO in MSW are inverse to moisture content. - Abstract: In order to reveal the features of the combustion process in the porous bed of a waste incinerator, a two-dimensional unsteady state model and experimental study were employed to investigate the combustion process in a fixed bed of municipal solid waste (MSW) on the combustion process in a fixed bed reactor. Conservation equations of the waste bed were implemented to describe the incineration process. The gas phase turbulence was modeled using the k–ε turbulent model and the particle phase was modeled using the kinetic theory of granular flow. The rate of moisture evaporation, devolatilization rate, and char burnout was calculated according to the waste property characters. The simulation results were then compared with experimental data for different moisture content of MSW, which shows that the incineration process of waste in the fixed bed is reasonably simulated. The simulation results of solid temperature, gas species and process rate in the bed are accordant with experimental data. Due to the high moisture content of fuel, moisture evaporation consumes a vast amount of heat, and the evaporation takes up most of the combustion time (about 2/3 of the whole combustion process). The whole bed combustion process reduces greatly as MSW moisture content increases. The experimental and simulation results provide direction for design and optimization of the fixed bed of MSW

  18. Assessing the effectiveness of 30% sodium chloride aqueous solution for the preservation of fixed anatomical specimens: a 5-year follow-up study.

    Science.gov (United States)

    de Oliveira, Fabrício Singaretti

    2014-07-01

    Anatomical specimens used in human or veterinary anatomy laboratories are usually prepared with formaldehyde (a cancerous and teratogenic substance), glycerin (an expensive and viscous fluid), or ethanol (which is flammable). This research aimed to verify the viability of an aqueous 30% sodium chloride solution for preservation of anatomical specimens previously fixed with formaldehyde. Anatomical specimens of ruminant, carnivorous, equine, swine and birds were used. All were previously fixed with an aqueous 20% formaldehyde solution and held for 7 days in a 10% aqueous solution of the same active ingredient. During the first phase of the experiment, small specimens of animal tissue previously fixed in formaldehyde were distributed in vials with different concentrations of formaldehyde, with or without 30% sodium chloride solution, a group containing only 30% sodium chloride, and a control group containing only water. During this phase, no contamination was observed in any specimen containing 30% sodium chloride solution, whether alone or in combination with different concentrations of formaldehyde. In the second phase of the experiment, the 30% sodium chloride solution, found to be optimal in the first phase of the experiment, was tested for its long-term preservation properties. For a period of 5 years, the preserved specimens were evaluated three times a week for visual contamination, odors, and changes in color and texture. There was no visual contamination or decay found in any specimen. Furthermore, no strange odors, or changes in color or softness were noted. The 30% sodium chloride solution was determined to be effective in the preservation of anatomic specimens previously fixed in formaldehyde. © 2014 Anatomical Society.

  19. Numerical and experimental studies on effects of moisture content on combustion characteristics of simulated municipal solid wastes in a fixed bed

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Rui, E-mail: Sunsr@hit.edu.cn [School of Energy Science and Engineering, Harbin Institute of Technology, 92, West Dazhi Street, Harbin 150001 (China); Ismail, Tamer M., E-mail: temoil@aucegypt.edu [Department of Mechanical Engineering, Suez Canal University, Ismailia (Egypt); Ren, Xiaohan [School of Energy Science and Engineering, Harbin Institute of Technology, 92, West Dazhi Street, Harbin 150001 (China); Abd El-Salam, M. [Department of Basic Science, Cairo University, Giza (Egypt)

    2015-05-15

    Highlights: • The effects of moisture content on the burning process of MSW are investigated. • A two-dimensional mathematical model was built to simulate the combustion process. • Temperature distributions, process rates, gas species were measured and simulated. • The The conversion ratio of C/CO and N/NO in MSW are inverse to moisture content. - Abstract: In order to reveal the features of the combustion process in the porous bed of a waste incinerator, a two-dimensional unsteady state model and experimental study were employed to investigate the combustion process in a fixed bed of municipal solid waste (MSW) on the combustion process in a fixed bed reactor. Conservation equations of the waste bed were implemented to describe the incineration process. The gas phase turbulence was modeled using the k–ε turbulent model and the particle phase was modeled using the kinetic theory of granular flow. The rate of moisture evaporation, devolatilization rate, and char burnout was calculated according to the waste property characters. The simulation results were then compared with experimental data for different moisture content of MSW, which shows that the incineration process of waste in the fixed bed is reasonably simulated. The simulation results of solid temperature, gas species and process rate in the bed are accordant with experimental data. Due to the high moisture content of fuel, moisture evaporation consumes a vast amount of heat, and the evaporation takes up most of the combustion time (about 2/3 of the whole combustion process). The whole bed combustion process reduces greatly as MSW moisture content increases. The experimental and simulation results provide direction for design and optimization of the fixed bed of MSW.

  20. Effect of Clark's twin-block appliance (CTB and non-extraction fixed mechano-therapy on the pharyngeal dimensions of growing children

    Directory of Open Access Journals (Sweden)

    Batool Ali

    2015-12-01

    Full Text Available Abstract Introduction: Narrow airway dimensions due to mandibular deficiency can predispose an individual to severe respiratory distress. Hence, treatment with mandibular advancement devices at an early age might help improving the pharyngeal passage and reduce the risk of respiratory difficulties. Therefore, the aim of the current study was to evaluate the mean changes in the pharyngeal dimensions of children with mandibular deficiency treated with Clark's twin-block appliance (CTB followed by fixed orthodontic treatment. Methods: Orthodontic records of 42 children with mandibular deficiency were selected. Records comprised three lateral cephalograms taken at the start of CTB treatment, after CTB removal and at the end of fixed appliance treatment, and were compared with 32 controls from the Bolton-Brush study. Friedman test was used to compare pre-treatment, mid-treatment and post-treatment pharyngeal dimensions. Wilcoxon signed rank test was used to compare the airway between pre-treatment and post follow-up controls. Mann-Whitney U test was applied to compare the mean changes in pharyngeal dimensions between treatment group and controls from T2 to T0. Post-hoc Dunnet T3 test was used for multiple comparisons of treatment outcomes after CTB and fixed appliances, taking a p-value of ≤ 0.05 as statistically significant. Results: Superior pharyngeal space (p < 0.001 and upper airway thickness (p = 0.035 were significantly increased after CTB, and the change in superior pharyngeal space remained stable after fixed mechano-therapy. Conclusion: CTB can have a positive effect in improving pharyngeal space and the resultant increase in airway remains stable on an average of two and a half years.

  1. The cultural effects of job mobility and the belief in a fixed world: evidence from performance forecast.

    Science.gov (United States)

    Chen, Jing; Chiu, Chi-yue; Chan, S Fiona

    2009-11-01

    Results from 5 studies illustrate how perception of and experiences with low job mobility can shape culture-characteristic pattern of judgments and behaviors. Although both Americans and some Asian groups (e.g., Chinese, Asian Americans) consider having successful practitioners' personality traits (role personalities) to be important to job performance, the Asian groups place heavier emphasis on possessing role personalities when making performance forecast than do Americans (Studies 1-3). Moreover, even among Americans, a brief subjective experience with low job mobility can increase the perceived importance of possessing role personalities in performance forecast (Study 4), and a brief direct experience with low job mobility can increase job applicants' tendency to claim possession of role personality traits in job applications (Study 5). Furthermore, the belief in a fixed world mediates the relationship between perception of low job mobility and perceived importance of possessing role personalities in performance forecast (Study 2).

  2. Effect of small-scale biomass gasification at the state of refractory lining the fixed bed reactor

    Energy Technology Data Exchange (ETDEWEB)

    Janša, Jan, E-mail: jan.jansa@vsb.cz; Peer, Vaclav, E-mail: vaclav.peer@vsb.cz; Pavloková, Petra, E-mail: petra.pavlokova@vsb.cz [VŠB – Technical University of Ostrava, Energy Research Center, 708 33 Ostrava (Czech Republic)

    2016-06-30

    The article deals with the influence of biomass gasification on the condition of the refractory lining of a fixed bed reactor. The refractory lining of the gasifier is one part of the device, which significantly affects the operational reliability and durability. After removing the refractory lining of the gasifier from the experimental reactor, there was done an assessment how gasification of different kinds of biomass reflected on its condition in terms of the main factors affecting its life. Gasification of biomass is reflected on the lining, especially through sticking at the bottom of the reactor. Measures for prolonging the life of lining consist in the reduction of temperature in the reactor, in this case, in order to avoid ash fusion biomass which it is difficult for this type of gasifier.

  3. Effects of tibial slope changes in the stability of fixed bearing medial unicompartmental arthroplasty in anterior cruciate ligament deficient knees.

    Science.gov (United States)

    Suero, Eduardo M; Citak, Musa; Cross, Michael B; Bosscher, Marianne R F; Ranawat, Anil S; Pearle, Andrew D

    2012-08-01

    Patients with anterior cruciate ligament (ACL) deficiency may have increased failure rates with UKA as a result of abnormal contact stresses and altered knee kinematics. Variations in the slope of the tibial component in UKA may alter tibiofemoral translation, and affect outcomes. This cadaveric study evaluated tibiofemoral translation during the Lachman and pivot shift tests after changing the slope of a fixed bearing unicondylar tibial component. Sectioning the ACL increased tibiofemoral translation in both the Lachman and pivot shift tests (Pslope leveling (decreasing the posterior slope) of the polyethylene insert in a UKA decreases anteroposterior tibiofemoral translation in the sagittal plane to a magnitude similar to that of the intact knee. With 8° of tibial slope leveling, anterior tibial translation during the Lachman test decreased by approximately 5mm. However, no variation in slope altered the pivot shift kinematics in the ACL deficient knees. Copyright © 2011 Elsevier B.V. All rights reserved.

  4. A novel method of including Landau level mixing in numerical studies of the quantum Hall effect

    International Nuclear Information System (INIS)

    Wooten, Rachel; Quinn, John; Macek, Joseph

    2013-01-01

    Landau level mixing should influence the quantum Hall effect for all except the strongest applied magnetic fields. We propose a simple method for examining the effects of Landau level mixing by incorporating multiple Landau levels into the Haldane pseudopotentials through exact numerical diagonalization. Some of the resulting pseudopotentials for the lowest and first excited Landau levels will be presented

  5. Transient performances analysis of wind turbine system with induction generator including flux saturation and skin effect

    DEFF Research Database (Denmark)

    Li, H.; Zhao, B.; Han, L.

    2010-01-01

    In order to analyze correctly the effect of different models for induction generators on the transient performances of large wind power generation, Wind turbine driven squirrel cage induction generator (SCIG) models taking into account both main and leakage flux saturation and skin effect were...

  6. Thermodynamic Analysis of TEG-TEC Device Including Influence of Thomson Effect

    Science.gov (United States)

    Feng, Yuanli; Chen, Lingen; Meng, Fankai; Sun, Fengrui

    2018-01-01

    A thermodynamic model of a thermoelectric cooler driven by thermoelectric generator (TEG-TEC) device is established considering Thomson effect. The performance is analyzed and optimized using numerical calculation based on non-equilibrium thermodynamic theory. The influence characteristics of Thomson effect on the optimal performance and variable selection are investigated by comparing the condition with and without Thomson effect. The results show that Thomson effect degrades the performance of TEG-TEC device, it decreases the cooling capacity by 27 %, decreases the coefficient of performance (COP) by 19 %, decreases the maximum cooling temperature difference by 11 % when the ratio of thermoelectric elements number is 0.6, the cold junction temperature of thermoelectric cooler (TEC) is 285 K and the hot junction temperature of thermoelectric generator (TEG) is 450 K. Thomson effect degrades the optimal performance of TEG-TEC device, it decreases the maximum cooling capacity by 28 % and decreases the maximum COP by 28 % under the same junction temperatures. Thomson effect narrows the optimal variable range and optimal working range. In the design of the devices, limited-number thermoelectric elements should be more allocated appropriately to TEG when consider Thomson effect. The results may provide some guidelines for the design of TEG-TEC devices.

  7. Microwave effective surface impedance of structures including a high-Tc superconducting film

    International Nuclear Information System (INIS)

    Hartemann, P.

    1992-01-01

    The microwave effective surface impedances of different stacks made of high-temperature superconducting films, dielectric materials and bulk normal metals were computed. The calculations were based on the two-fluid model of superconductors and the conventional transmission line theory. These effective impedances are compared to the calculated intrinsic surface impedances of the stacked superconducting films. The considered superconducting material has been the oxide YBa 2 Cu 3 O 7 epitaxially grown on crystalline substrates (MgO, LaAlO 3 , SrTiO 3 ), the film thickness ranging from a few nm to 1μm. Discrepancies between the effective surface resistances or reactances and the corresponding intrinsic values were determined at 10 GHz for non resonant or resonant structures. At resonance the surface resistance discrepancy exhibits a sharp peak which reaches 10 4 or more in relative value according to the geometry and the used materials. Obviously the effective surface reactance shows also huge variations about the resonance and may be negative. Moreover geometries allowing to obtain an effective resistance smaller than the film intrinsic value have been found. The effects of the resonance phenomenon on the electromagnetic wave reflectivity and reflection phase shift are investigated. Therefore the reported theoretical results demonstrate that the effective surface impedance of YBCO films with a thickness smaller than 500 nm can be very different from the intrinsic film impedance according to the structures. (Author). 3 refs., 10 figs., 2 tabs

  8. Turbulent boundary layer heat transfer experiments: Convex curvature effects including introduction and recovery

    Science.gov (United States)

    Simon, T. W.; Moffat, R. J.; Johnston, J. P.; Kays, W. M.

    1982-01-01

    Measurements were made of the heat transfer rate through turbulent and transitional boundary layers on an isothermal, convexly curved wall and downstream flat plate. The effect of convex curvature on the fully turbulent boundary layer was a reduction of the local Stanton numbers 20% to 50% below those predicted for a flat wall under the same circumstances. The recovery of the heat transfer rates on the downstream flat wall was extremely slow. After 60 cm of recovery length, the Stanton number was still typically 15% to 20% below the flat wall predicted value. Various effects important in the modeling of curved flows were studied separately. These are: the effect of initial boundary layer thickness, the effect of freestream velocity, the effect of freestream acceleration, the effect of unheated starting length, and the effect of the maturity of the boundary layer. An existing curvature prediction model was tested against this broad heat transfer data base to determine where it could appropriately be used for heat transfer predictions.

  9. Changes and variations in online and offline communication patterns : Including peer effects

    NARCIS (Netherlands)

    Hage, Eveline; Noseleit, Florian

    2015-01-01

    The impact of online communication on offline communication has received considerable research attention. Yet predominantly single level studies yield conflicting research findings and lack theoretical foundation. This study deviates from previous studies by developing a peer effect model rooted in

  10. Effect of pressurized water reactor environment on fatigue crack propagation, including hole times

    International Nuclear Information System (INIS)

    Bamford, W.H.

    1976-01-01

    Results are presented from an experimental program being conducted to investigate the effects of pressurized water reactor environment on the fatigue crack growth rate of pressure vessel steels. Tests were conducted on precracked WOL type specimens under load controlled conditions. The effects of R ratio, loading rates, and loading wave form are evaluated, and the results are compared for both forging and plate material, as well as weldments

  11. Flat Coalgebraic Fixed Point Logics

    Science.gov (United States)

    Schröder, Lutz; Venema, Yde

    Fixed point logics are widely used in computer science, in particular in artificial intelligence and concurrency. The most expressive logics of this type are the μ-calculus and its relatives. However, popular fixed point logics tend to trade expressivity for simplicity and readability, and in fact often live within the single variable fragment of the μ-calculus. The family of such flat fixed point logics includes, e.g., CTL, the *-nesting-free fragment of PDL, and the logic of common knowledge. Here, we extend this notion to the generic semantic framework of coalgebraic logic, thus covering a wide range of logics beyond the standard μ-calculus including, e.g., flat fragments of the graded μ-calculus and the alternating-time μ-calculus (such as ATL), as well as probabilistic and monotone fixed point logics. Our main results are completeness of the Kozen-Park axiomatization and a timed-out tableaux method that matches ExpTime upper bounds inherited from the coalgebraic μ-calculus but avoids using automata.

  12. Effects of distance from center of a weld to fixed end on residual stress and stress intensity factor of a piping weld. Evaluation of SCC growth under residual stress field. Report 1

    International Nuclear Information System (INIS)

    Miyazaki, Katsumasa; Numata, Masanori; Saito, Koichi; Mochizuki, Masahito

    2006-01-01

    The fixed conditions of butt welds between straight pipe and valve or pump in the actual piping system are different from those of straight pipes. However, the effect of fixed condition on the residual stress and the stress intensity factor for evaluation of structural integrity of cracked piping was not clear. In this study, the finite element analyses were conducted by considering the differences in the distance from the center of weld to the fixed end L to clarify the effect of fixed condition on the residual stress and the stress intensity factor. For the 600 A piping, the axial residual stress distribution was not affected by the distance L. Furthermore, the stress intensity factor of circumferential crack under the residual stress field with fixed condition could be estimated by using the existing simplified solution for piping. (author)

  13. Calculations of environmental benefits from using geothermal energy must include the rebound effect

    DEFF Research Database (Denmark)

    Atlason, Reynir Smari; Unnthorsson, Runar

    2017-01-01

    and energy production patterns are simulated using data from countries with similar environmental conditions but do not use geothermal or hydropower to the same extent as Iceland. Because of the rapid shift towards renewable energy and exclusion of external energy provision, the country is considered......When considering the environmental benefits from converting to renewable energy sources, the rebound effect is often omitted. In this study, the aim is to investigate greenhouse gas emission reduction inclusive of the rebound effect. We use Iceland as a case study where alternative consumption...

  14. Quantified, Interactive Simulation of AMCW ToF Camera Including Multipath Effects.

    Science.gov (United States)

    Bulczak, David; Lambers, Martin; Kolb, Andreas

    2017-12-22

    In the last decade, Time-of-Flight (ToF) range cameras have gained increasing popularity in robotics, automotive industry, and home entertainment. Despite technological developments, ToF cameras still suffer from error sources such as multipath interference or motion artifacts. Thus, simulation of ToF cameras, including these artifacts, is important to improve camera and algorithm development. This paper presents a physically-based, interactive simulation technique for amplitude modulated continuous wave (AMCW) ToF cameras, which, among other error sources, includes single bounce indirect multipath interference based on an enhanced image-space approach. The simulation accounts for physical units down to the charge level accumulated in sensor pixels. Furthermore, we present the first quantified comparison for ToF camera simulators. We present bidirectional reference distribution function (BRDF) measurements for selected, purchasable materials in the near-infrared (NIR) range, craft real and synthetic scenes out of these materials and quantitatively compare the range sensor data.

  15. Quantum Effect in a Diode Included Nonlinear Inductance-Capacitance Mesoscopic Circuit

    International Nuclear Information System (INIS)

    Yan Zhanyuan; Zhang Xiaohong; Ma Jinying

    2009-01-01

    The mesoscopic nonlinear inductance-capacitance circuit is a typical anharmonic oscillator, due to diodes included in the circuit. In this paper, using the advanced quantum theory of mesoscopic circuits, which based on the fundamental fact that the electric charge takes discrete value, the diode included mesoscopic circuit is firstly studied. Schroedinger equation of the system is a four-order difference equation in p-circumflex representation. Using the extended perturbative method, the detail energy spectrum and wave functions are obtained and verified, as an application of the results, the current quantum fluctuation in the ground state is calculated. Diode is a basis component in a circuit, its quantization would popularize the quantum theory of mesoscopic circuits. The methods to solve the high order difference equation are helpful to the application of mesoscopic quantum theory.

  16. Development of calculation method for one-dimensional kinetic analysis in fission reactors, including feedback effects

    International Nuclear Information System (INIS)

    Paixao, S.B.; Marzo, M.A.S.; Alvim, A.C.M.

    1986-01-01

    The calculation method used in WIGLE code is studied. Because of the non availability of such a praiseworthy solution, expounding the method minutely has been tried. This developed method has been applied for the solution of the one-dimensional, two-group, diffusion equations in slab, axial analysis, including non-boiling heat transfer, accountig for feedback. A steady-state program (CITER-1D), written in FORTRAN 4, has been implemented, providing excellent results, ratifying the developed work quality. (Author) [pt

  17. Including Effects of Water Stress on Dead Organic Matter Decay to a Forest Carbon Model

    Science.gov (United States)

    Kim, H.; Lee, J.; Han, S. H.; Kim, S.; Son, Y.

    2017-12-01

    Decay of dead organic matter is a key process of carbon (C) cycling in forest ecosystems. The change in decay rate depends on temperature sensitivity and moisture conditions. The Forest Biomass and Dead organic matter Carbon (FBDC) model includes a decay sub-model considering temperature sensitivity, yet does not consider moisture conditions as drivers of the decay rate change. This study aimed to improve the FBDC model by including a water stress function to the decay sub-model. Also, soil C sequestration under climate change with the FBDC model including the water stress function was simulated. The water stress functions were determined with data from decomposition study on Quercus variabilis forests and Pinus densiflora forests of Korea, and adjustment parameters of the functions were determined for both species. The water stress functions were based on the ratio of precipitation to potential evapotranspiration. Including the water stress function increased the explained variances of the decay rate by 19% for the Q. variabilis forests and 7% for the P. densiflora forests, respectively. The increase of the explained variances resulted from large difference in temperature range and precipitation range across the decomposition study plots. During the period of experiment, the mean annual temperature range was less than 3°C, while the annual precipitation ranged from 720mm to 1466mm. Application of the water stress functions to the FBDC model constrained increasing trend of temperature sensitivity under climate change, and thus increased the model-estimated soil C sequestration (Mg C ha-1) by 6.6 for the Q. variabilis forests and by 3.1 for the P. densiflora forests, respectively. The addition of water stress functions increased reliability of the decay rate estimation and could contribute to reducing the bias in estimating soil C sequestration under varying moisture condition. Acknowledgement: This study was supported by Korea Forest Service (2017044B10-1719-BB01)

  18. Dusty Plasma Modeling of the Fusion Reactor Sheath Including Collisional-Radiative Effects

    International Nuclear Information System (INIS)

    Dezairi, Aouatif; Samir, Mhamed; Eddahby, Mohamed; Saifaoui, Dennoun; Katsonis, Konstantinos; Berenguer, Chloe

    2008-01-01

    The structure and the behavior of the sheath in Tokamak collisional plasmas has been studied. The sheath is modeled taking into account the presence of the dust 2 and the effects of the charged particle collisions and radiative processes. The latter may allow for optical diagnostics of the plasma.

  19. The effect of including an opt-out option in discrete choice experiments

    NARCIS (Netherlands)

    J. Veldwijk (Jorien); M.S. Lambooij (Mattijs); E.W. de Bekker-Grob (Esther); H.A. Smit (Henriëtte); G.A. De Wit (G. Ardine)

    2014-01-01

    markdownabstractObjective: to determine to what extent the inclusion of an opt-out option in a DCE may have an effect on choice behaviour and therefore might influence the attribute level estimates, the relative importance of the attributes and calculated tradeoffs. Methods: 781 Dutch Type 2

  20. Psychophysiological effects of an iTBS modulated virtual reality challenge including participants with spider phobia.

    Science.gov (United States)

    Notzon, S; Deppermann, S; Fallgatter, A; Diemer, J; Kroczek, A; Domschke, K; Zwanzger, P; Ehlis, A-C

    2015-12-01

    Preliminary evidence suggests beneficial effects of transcranial magnetic stimulation (TMS) on anxiety. The objective of this study was to investigate the effects of intermittent theta burst stimulation (iTBS) as a form of TMS on acute anxiety provoked by a virtual reality (VR) scenario. Participants with spider phobia (n=41) and healthy controls (n=42) were exposed to a spider scenario in VR after one session of iTBS over the prefrontal cortex or sham treatment. Participants with spider phobia reacted with more anxiety compared to healthy controls. Their heart rate and skin conductance increased compared to baseline. Contrary to expectations, iTBS did not influence these reactions, but modulated heart rate variability (HRV). Sympathetic influence on HRV showed an increase in the active iTBS group only. This study does not support the idea of beneficial effects of a single session of iTBS on anxiety, although other protocols or repeated sessions might be effective. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Electron density in reasonably real metallic surfaces, including interchange and correlation effects

    International Nuclear Information System (INIS)

    Moraga, L.A.; Martinez, G.

    1981-01-01

    By means of a new method, the electron density in a jellium surface is calculated taking in account interchange and correlation effects; reproducing, in this way, the Lang and Kohn results. The new method is self-consistent but not iterative and hence is possible extend it to the solution of the same problem in more reasonably real metallic surfaces. (L.C.) [pt

  2. The cost-effectiveness of gestational diabetes screening including prevention of type 2 diabetes

    DEFF Research Database (Denmark)

    Marseille, Elliot; Lohse, Nicolai; Jiwani, Aliya

    2013-01-01

    Gestational diabetes mellitus (GDM) is associated with elevated risks of perinatal complications and type 2 diabetes mellitus, and screening and intervention can reduce these risks. We quantified the cost, health impact and cost-effectiveness of GDM screening and intervention in India and Israel,...

  3. Evaluation of plant-wide WWTP control strategies including the effects of filamentous bulking sludge

    DEFF Research Database (Denmark)

    Flores Alsina, Xavier; Comas, J.S.; Rodríguez Roda, I.

    2009-01-01

    The main objective of this paper is to evaluate the effect of filamentous bulking sludge on the predicted performance of simulated plant-wide WWTP control strategies. First, as a reference case, several control strategies are implemented, simulated and evaluated using the IWA Benchmark Simulation...

  4. Proceedings of the second US-USSR symposium: air pollution effects on vegetation including forest ecosystems

    Science.gov (United States)

    Reginald D. Noble; Juri L Martin; Keith F., eds. Jensen; Keith F. Jensen

    1989-01-01

    To commemorate the 10th year of cooperation between the US-USSR in the field of environmental protection, a symposium was organized, the major objectives of which were to acquaint US-USSR scientists with project accomplishments; to promote understanding of the nature of environmental problems that relate to air pollution effect on vegetation on a more global scale; to...

  5. [Effect of complex sanatorium treatment including magnetotherapy on hemodynamics in patients with arterial hypertension].

    Science.gov (United States)

    Efremushkin, G G; Duruda, N V

    2003-01-01

    Forty nine patients with arterial hypertension of stage I-II received combined sanatorium treatment. Of them, 21 had adjuvant total magnetotherapy. All the patients were examined for parameters of central, cerebral hemodynamics and microcirculation. The adjuvant magnetotherapy produced a beneficial effect on hypertension: clinical symptoms attenuated, arterial pressure became more stable, hemodynamics improved, duration of hospitalization reduced, requirement in hypotensive drugs diminished.

  6. Dilepton Yields from Brown-Rho Scaled Vector Mesons Including Memory Effects

    International Nuclear Information System (INIS)

    Schenke, Bjoern; Greiner, Carsten

    2007-01-01

    Scenarios with dropping vector meson masses, motivated by the work of Brown and Rho, have been strongly discussed after recent NA60 Collaboration data were presented. In this Letter they are investigated within a nonequilibrium field theoretical description that includes quantum mechanical memory. Dimuon yields are calculated by application of a model for the fireball, and strong modifications are found in the comparison to quasiequilibrium calculations, which assume instantaneous adjustment of all meson properties to the surrounding medium. In addition, results for the situation of very broad excitations are presented

  7. Renovation and Strengthening of Wooden Beams With CFRP Bands Including the Rheological Effects

    Directory of Open Access Journals (Sweden)

    Kula Krzysztof

    2016-09-01

    Full Text Available The paper presents a work analysis of wooden beams reinforced with glued composite bands from the top and resin inclusions, taking into account the rheology of materials. The paper presents numerical model of the multimaterial beam work including rheological phenomena described by linear equations of viscoelasticity. For the construction of this model one used MES SIMULIA ABAQUS environment in which were prepared its own procedures containing rheological models. The calculation results were compared with the literature data. One has done an analysis of the advisability of the use of CFRP reinforcements bands in terms of rheological phenomena.

  8. Taylor Series Trajectory Calculations Including Oblateness Effects and Variable Atmospheric Density

    Science.gov (United States)

    Scott, James R.

    2011-01-01

    Taylor series integration is implemented in NASA Glenn's Spacecraft N-body Analysis Program, and compared head-to-head with the code's existing 8th- order Runge-Kutta Fehlberg time integration scheme. This paper focuses on trajectory problems that include oblateness and/or variable atmospheric density. Taylor series is shown to be significantly faster and more accurate for oblateness problems up through a 4x4 field, with speedups ranging from a factor of 2 to 13. For problems with variable atmospheric density, speedups average 24 for atmospheric density alone, and average 1.6 to 8.2 when density and oblateness are combined.

  9. Predictive simulations and optimization of nanowire field-effect PSA sensors including screening

    KAUST Repository

    Baumgartner, Stefan; Heitzinger, Clemens; Vacic, Aleksandar; Reed, Mark A

    2013-01-01

    We apply our self-consistent PDE model for the electrical response of field-effect sensors to the 3D simulation of nanowire PSA (prostate-specific antigen) sensors. The charge concentration in the biofunctionalized boundary layer at the semiconductor-electrolyte interface is calculated using the propka algorithm, and the screening of the biomolecules by the free ions in the liquid is modeled by a sensitivity factor. This comprehensive approach yields excellent agreement with experimental current-voltage characteristics without any fitting parameters. Having verified the numerical model in this manner, we study the sensitivity of nanowire PSA sensors by changing device parameters, making it possible to optimize the devices and revealing the attributes of the optimal field-effect sensor. © 2013 IOP Publishing Ltd.

  10. Effects of workload on teachers' functioning: A moderated mediation model including sleeping problems and overcommitment.

    Science.gov (United States)

    Huyghebaert, Tiphaine; Gillet, Nicolas; Beltou, Nicolas; Tellier, Fanny; Fouquereau, Evelyne

    2018-06-14

    This study investigated the mediating role of sleeping problems in the relationship between workload and outcomes (emotional exhaustion, presenteeism, job satisfaction, and performance), and overcommitment was examined as a moderator in the relationship between workload and sleeping problems. We conducted an empirical study using a sample of 884 teachers. Consistent with our predictions, results revealed that the positive indirect effects of workload on emotional exhaustion and presenteeism, and the negative indirect effects of workload on job satisfaction and performance, through sleeping problems, were only significant among overcommitted teachers. Workload and overcommitment were also directly related to all four outcomes, precisely, they both positively related to emotional exhaustion and presenteeism and negatively related to job satisfaction and performance. Theoretical contributions and perspectives and implications for practice are discussed. Copyright © 2018 John Wiley & Sons, Ltd.

  11. Predictive simulations and optimization of nanowire field-effect PSA sensors including screening

    KAUST Repository

    Baumgartner, Stefan

    2013-05-03

    We apply our self-consistent PDE model for the electrical response of field-effect sensors to the 3D simulation of nanowire PSA (prostate-specific antigen) sensors. The charge concentration in the biofunctionalized boundary layer at the semiconductor-electrolyte interface is calculated using the propka algorithm, and the screening of the biomolecules by the free ions in the liquid is modeled by a sensitivity factor. This comprehensive approach yields excellent agreement with experimental current-voltage characteristics without any fitting parameters. Having verified the numerical model in this manner, we study the sensitivity of nanowire PSA sensors by changing device parameters, making it possible to optimize the devices and revealing the attributes of the optimal field-effect sensor. © 2013 IOP Publishing Ltd.

  12. Dynamic behavior of a rotating delaminated composite beam including rotary inertia and shear deformation effects

    Directory of Open Access Journals (Sweden)

    Ramazan-Ali Jafari-Talookolaei

    2015-09-01

    Full Text Available A finite element (FE model is developed to study the free vibration of a rotating laminated composite beam with a single delamination. The rotary inertia and shear deformation effects, as well as the bending–extension, bending–twist and extension–twist coupling terms are taken into account in the FE model. Comparison between the numerical results of the present model and the results published in the literature verifies the validity of the present model. Furthermore, the effects of various parameters, such as delamination size and location, fiber orientation, hub radius, material anisotropy and rotating speed, on the vibration of the beam are studied in detail. These results provide useful information in the study of the free vibration of rotating delaminated composite beams.

  13. pH-Free Measurement of Relative Acidities, Including Isotope Effects.

    Science.gov (United States)

    Perrin, Charles L

    2017-01-01

    A powerful pH-free multicomponent NMR titration method can measure relative acidities, even of closely related compounds, with excellent accuracy. The history of the method is presented, along with details of its implementation and a comparison with earlier NMR titrations using a pH electrode. Many of its areas of applicability are described, especially equilibrium isotope effects. The advantages of the method, some practical considerations, and potential pitfalls are considered. © 2017 Elsevier Inc. All rights reserved.

  14. Including the Effect of Shielding in Prediction of Weather Window for Offshore Lifting Operations

    OpenAIRE

    Olsen, Camilla Waldum

    2015-01-01

    The offshore industry is constantly seeking to operate in more extreme conditions. DeepOcean is a subsea service company, where offshore lifts is a part of every day operations. To remain competitive, it is important to reduce operational downtime, where time spent waiting on weather is one of the main contributors. The main goal of this thesis is to investigate how shielding effects influence the operational limit for offshore lifting operations at different heading angles. Common practice i...

  15. Burkholderia caballeronis sp. nov., a nitrogen fixing species isolated from tomato (Lycopersicon esculentum) with the ability to effectively nodulate Phaseolus vulgaris.

    Science.gov (United States)

    Martínez-Aguilar, Lourdes; Salazar-Salazar, Corelly; Méndez, Rafael Díaz; Caballero-Mellado, Jesús; Hirsch, Ann M; Vásquez-Murrieta, María Soledad; Estrada-de los Santos, Paulina

    2013-12-01

    During a survey of Burkholderia species with potential use in agrobiotechnology, a group of 12 strains was isolated from the rhizosphere and rhizoplane of tomato plants growing in Mexico (Nepantla, Mexico State). A phylogenetic analysis of 16S rRNA gene sequences showed that the strains are related to Burkholderia kururiensis and Burkholderia mimosarum (97.4 and 97.1 %, respectively). However, they induced effective nitrogen-fixing nodules on roots of Phaseolus vulgaris. Based on polyphasic taxonomy, the group of strains represents a novel species for which the name Burkholderia caballeronis sp. nov. is proposed. The type species is TNe-841(T) (= LMG 26416(T) = CIP 110324(T)).

  16. Dynamic Effect of a Change in the Exchange Rate System: From a Fixed Regime to a Basket-Peg or a Floating Regime

    OpenAIRE

    Yoshino, Naoyuki; Kaji, Sahoko; Asonuma, Tamon

    2015-01-01

    This paper theoretically evaluates the dynamic effects of a shift in an exchange rate system from a fixed regime to a basket peg, or to a floating regime, and obtains transition paths for the shift based on a dynamic stochastic general equilibrium model of a small open economy. We apply quantitative analysis using data from the People's Republic of China and Thailand and find that a small open country would be better off shifting to a basket peg or to a floating regime than maintaining a doll...

  17. Heat transfer behavior including thermal wake effects in forced air cooling of arrays of rectangular blocks

    International Nuclear Information System (INIS)

    Sridhar, S.; Faghri, M.; Lessmann, R.C.

    1990-01-01

    Experiments have been carried out to study thermal wake effects in arrays of rectangular blocks encountered in electronic equipment. Data were obtained for a series of channel heights and flow velocities. The temperature rise due to wake effects behind a single heated module was found to be fairly independent of the channel height and the position of the heated block, for a given approach velocity. The adiabatic temperature rise data for a module due to a heated element immediately upstream of it for different inter-module spacings were found to correlate well in terms of a new parameter called the surface packing density. This paper reports that it was reported by the authors in an earlier paper that both the adiabatic heat transfer coefficient nd pressure-drop data for regular in-line arrays correlated well in terms of a composite geometric parameter called the column packing density. These experiments have been extended to a higher Reynolds number. Empirical correlations are presented here for friction factor and Nusselt number in terms of the volume packing density, and for the thermal wake effects in terms of the surface packing density. Data from literature for arrays with widely different geometric parameters are shown to agree with these correlations

  18. Quantified, Interactive Simulation of AMCW ToF Camera Including Multipath Effects

    Directory of Open Access Journals (Sweden)

    David Bulczak

    2017-12-01

    Full Text Available In the last decade, Time-of-Flight (ToF range cameras have gained increasing popularity in robotics, automotive industry, and home entertainment. Despite technological developments, ToF cameras still suffer from error sources such as multipath interference or motion artifacts. Thus, simulation of ToF cameras, including these artifacts, is important to improve camera and algorithm development. This paper presents a physically-based, interactive simulation technique for amplitude modulated continuous wave (AMCW ToF cameras, which, among other error sources, includes single bounce indirect multipath interference based on an enhanced image-space approach. The simulation accounts for physical units down to the charge level accumulated in sensor pixels. Furthermore, we present the first quantified comparison for ToF camera simulators. We present bidirectional reference distribution function (BRDF measurements for selected, purchasable materials in the near-infrared (NIR range, craft real and synthetic scenes out of these materials and quantitatively compare the range sensor data.

  19. Ab initio effective core potentials including relativistic effects. II. Potential energy curves for Xe2, Xe+2, and Xe*2

    International Nuclear Information System (INIS)

    Ermler, W.C.; Lee, Y.S.; Pitzer, K.S.; Winter, N.W.

    1978-01-01

    Potential energy curves for the ground 1 Σ + /sub g/ state of Xe 2 , the first four states of the Xe + 2 ions, and the eight Xe* 2 excimer states corresponding to the addition of a 6ssigma/sub g/ Rydberg electron to these ion cores have been computed using averaged relativistic effective core potentials (AREP) and the self-consistent field approximation for the valence electrons. The calculations were carried out using the LS-coupling scheme with the effects of spin--orbit coupling included in the resulting potential energy curves using an empirical procedure. A comparison of nonrelativistic and averaged relativistic EP's and subsequent molecular calculations indicates that relativistic effects arising from the mass--velocity and Darwin terms are not important for these properties of Xe 2 molecules. Spectroscopic constants for Xe + 2 are in good agreement with all electron CI calculations suggesting that the computed values for Xe* 2 excimers should be reliable. The lifetime for the O/sub u/ + state of the Xe 2 * is computed to be 5.6 nsec which is in the range of the experimentally determined values

  20. Fixed automated spray technology.

    Science.gov (United States)

    2011-04-19

    This research project evaluated the construction and performance of Boschungs Fixed Automated : Spray Technology (FAST) system. The FAST system automatically sprays de-icing material on : the bridge when icing conditions are about to occur. The FA...

  1. Effect of a procedural video CD and study guide on the practical fixed prosthodontic performance of Iranian dental students.

    Science.gov (United States)

    Nikzad, Sakineh; Azari, Abbas; Mahgoli, Hosseinali; Akhoundi, Nasrin

    2012-03-01

    Dental students in programs around the world typically pass preclinical courses before entering the clinic and working on actual patients. Since fixed prosthodontics is a preclinical course that requires a great deal of effort, students may experience a substantial amount of stress that may affect their self-confidence and/or clinical performance. In this study, an instructional video CD (VCD) and study guide depicting the step-by-step procedures involved in a metal-ceramic tooth preparation and provisional crown fabrication was prepared. Students at the Faculty of Dentistry, Tehran University of Medical Sciences, Tehran, Iran, were divided randomly into two groups. Group A students trained as usual with live patients, and Group B students were given a copy of the VCD and study guide following a lecture. The students in Group B were encouraged to read the study guide and watch the VCD after live demonstrations. Then, both groups practiced individually on mannequins. At the end of the course, the students completed a sixteen-item questionnaire about their stress level, self-confidence, and knowledge base. The results showed that the students exposed to the extra media performed significantly better on some practical phases, e.g., laboratory procedures. A moderate, insignificant correlation was detected between exposure to media and decreasing the students' stress and self-esteem. We concluded that supplementary teaching aids such as a VCD and study guide may improve the clinical performance of dental students to some extent, but the live demonstration is still preferred by students.

  2. Fixed mobile convergence handbook

    CERN Document Server

    Ahson, Syed A

    2010-01-01

    From basic concepts to future directions, this handbook provides technical information on all aspects of fixed-mobile convergence (FMC). The book examines such topics as integrated management architecture, business trends and strategic implications for service providers, personal area networks, mobile controlled handover methods, SIP-based session mobility, and supervisory and notification aggregator service. Case studies are used to illustrate technical and systematic implementation of unified and rationalized internet access by fixed-mobile network convergence. The text examines the technolo

  3. Enduring effects of severe developmental adversity, including nutritional deprivation, on cortisol metabolism in aging Holocaust survivors.

    Science.gov (United States)

    Yehuda, Rachel; Bierer, Linda M; Andrew, Ruth; Schmeidler, James; Seckl, Jonathan R

    2009-06-01

    In animal models, early life exposure to major environmental challenges such as malnutrition and stress results in persisting cardiometabolic, neuroendocrine and affective effects. While such effects have been associated with pathogenesis, the widespread occurrence of 'developmental programming' suggests it has adaptive function. Glucocorticoids may mediate 'programming' and their metabolism is known to be affected by early life events in rodents. To examine these relationships in humans, cortisol metabolism and cardiometabolic disease manifestations were examined in Holocaust survivors in relation to age at exposure and affective dysfunction, notably lifetime posttraumatic stress disorder (PTSD). Fifty-one Holocaust survivors and 22 controls without Axis I disorder collected 24-h urine samples and were evaluated for psychiatric disorders and cardiometabolic diagnoses. Corticosteroids and their metabolites were assayed by gas chromatography-mass spectroscopy (GC-MS); cortisol was also measured by radioimmunoassay (RIA). Holocaust survivors showed reduced cortisol by RIA, and decreased levels of 5alpha-tetrahydrocortisol (5alpha-THF) and total glucocorticoid production by GC-MS. The latter was associated with lower cortisol metabolism by 5alpha-reductase and 11beta-hydroxysteroid dehydrogenase (11beta-HSD) type-2. The greatest decrements were associated with earliest age of Holocaust exposure and less severe PTSD symptomatology. Cardiometabolic manifestations were associated with decreased 11beta-HSD-2 activity. In controls, 5alpha-reductase was positively associated with trauma-related symptoms (i.e., to traumatic exposures unrelated to the Holocaust). Extreme malnutrition and related stress during development is associated with long-lived alterations in specific pathways of glucocorticoid metabolism. These effects may be adaptive and link with lower risks of cardiometabolic and stress-related disorders in later life.

  4. Specialists meeting on properties of primary circuit structural materials including environmental effects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1977-07-01

    The Specialists Meeting on Properties of Primary Circuit Structural Materials of LMFBRs covered the following topics: overview of materials program in different countries; mechanical properties of materials in air; fracture mechanics studies - component related activities; impact of environmental influences on mechanical properties; relationship of material properties and design methods. The purpose of the meeting was to provide a forum for exchange of information on structural materials behaviour in primary circuit of fast breeder reactors. Special emphasis was placed on environmental effects such as influence of sodium and irradiation on mechanical properties of reactor materials.

  5. Specialists meeting on properties of primary circuit structural materials including environmental effects

    International Nuclear Information System (INIS)

    1977-01-01

    The Specialists Meeting on Properties of Primary Circuit Structural Materials of LMFBRs covered the following topics: overview of materials program in different countries; mechanical properties of materials in air; fracture mechanics studies - component related activities; impact of environmental influences on mechanical properties; relationship of material properties and design methods. The purpose of the meeting was to provide a forum for exchange of information on structural materials behaviour in primary circuit of fast breeder reactors. Special emphasis was placed on environmental effects such as influence of sodium and irradiation on mechanical properties of reactor materials

  6. Effect of including decay chains on predictions of equilibrium-type terrestrial food chain models

    International Nuclear Information System (INIS)

    Kirchner, G.

    1990-01-01

    Equilibrium-type food chain models are commonly used for assessing the radiological impact to man from environmental releases of radionuclides. Usually these do not take into account build-up of radioactive decay products during environmental transport. This may be a potential source of underprediction. For estimating consequences of this simplification, the equations of an internationally recognised terrestrial food chain model have been extended to include decay chains of variable length. Example calculations show that for releases from light water reactors as expected both during routine operation and in the case of severe accidents, the build-up of decay products during environmental transport is generally of minor importance. However, a considerable number of radionuclides of potential radiological significance have been identified which show marked contributions of decay products to calculated contamination of human food and resulting radiation dose rates. (author)

  7. Structural and functional effects of heavy metals on the nervous system, including sense organs, of fish

    DEFF Research Database (Denmark)

    Baatrup, E

    1991-01-01

    metals are well known pollutants in the aquatic environment. Their interaction with relevant chemical stimuli may interfere with the communication between fish and environment. 5. The affinity for a number of ligands and macromolecules makes heavy metals most potent neurotoxins. 6. The present Mini......1. Today, fish in the environment are inevitably exposed to chemical pollution. Although most hazardous substances are present at concentrations far below the lethal level, they may still cause serious damage to the life processes of these animals. 2. Fish depend on an intact nervous system......, including their sense organs, for mediating relevant behaviour such as food search, predator recognition, communication and orientation. 3. Unfortunately, the nervous system is most vulnerable and injuries to its elements may dramatically change the behaviour and consequently the survival of fish. 4. Heavy...

  8. Simulation of thermal reset transitions in resistive switching memories including quantum effects

    Energy Technology Data Exchange (ETDEWEB)

    Villena, M. A.; Jiménez-Molinos, F.; Roldán, J. B. [Departamento de Electrónica y Tecnología de Computadores, Universidad de Granada, Facultad de Ciencias, Avd. Fuentenueva s/n, 18071 Granada (Spain); González, M. B.; Campabadal, F. [Institut de Microelectrònica de Barcelona, IMB-CNM (CSIC), Campus UAB, 08193 Bellaterra (Spain); Suñé, J.; Miranda, E. [Departament d' Enginyeria Electrònica, Universitat Autònoma de Barcelona, Bellaterra Cerdanyola del Vallès 08193 (Spain); Romera, E. [Departamento de Física Atómica, Molecular y Nuclear and Instituto Carlos I de Física Teórica y Computacional, Universidad de Granada, Avd. Fuentenueva s/n, 18071 Granada (Spain)

    2014-06-07

    An in-depth study of reset processes in RRAMs (Resistive Random Access Memories) based on Ni/HfO{sub 2}/Si-n{sup +} structures has been performed. To do so, we have developed a physically based simulator where both ohmic and tunneling based conduction regimes are considered along with the thermal description of the devices. The devices under study have been successfully fabricated and measured. The experimental data are correctly reproduced with the simulator for devices with a single conductive filament as well as for devices including several conductive filaments. The contribution of each conduction regime has been explained as well as the operation regimes where these ohmic and tunneling conduction processes dominate.

  9. Gaining Insight into an Organization's Fixed Assets.

    Science.gov (United States)

    Hardy, Elisabet

    2003-01-01

    Discusses issues related to school district implementation of June 2001 Government Accounting Standards Board (GASB) Statement 34 designed to change how schools report fixed assets. Includes planning for GASB implementation, conducting fixed-asset inventories, and making time for GASB reporting. (PKP)

  10. Kinetic model of water disinfection using peracetic acid including synergistic effects.

    Science.gov (United States)

    Flores, Marina J; Brandi, Rodolfo J; Cassano, Alberto E; Labas, Marisol D

    2016-01-01

    The disinfection efficiencies of a commercial mixture of peracetic acid against Escherichia coli were studied in laboratory scale experiments. The joint and separate action of two disinfectant agents, hydrogen peroxide and peracetic acid, were evaluated in order to observe synergistic effects. A kinetic model for each component of the mixture and for the commercial mixture was proposed. Through simple mathematical equations, the model describes different stages of attack by disinfectants during the inactivation process. Based on the experiments and the kinetic parameters obtained, it could be established that the efficiency of hydrogen peroxide was much lower than that of peracetic acid alone. However, the contribution of hydrogen peroxide was very important in the commercial mixture. It should be noted that this improvement occurred only after peracetic acid had initiated the attack on the cell. This synergistic effect was successfully explained by the proposed scheme and was verified by experimental results. Besides providing a clearer mechanistic understanding of water disinfection, such models may improve our ability to design reactors.

  11. Supernova equations of state including full nuclear ensemble with in-medium effects

    Science.gov (United States)

    Furusawa, Shun; Sumiyoshi, Kohsuke; Yamada, Shoichi; Suzuki, Hideyuki

    2017-01-01

    We construct new equations of state for baryons at sub-nuclear densities for the use in core-collapse supernova simulations. The abundance of various nuclei is obtained together with thermodynamic quantities. The formulation is an extension of the previous model, in which we adopted the relativistic mean field theory with the TM1 parameter set for nucleons, the quantum approach for d, t, h and α as well as the liquid drop model for the other nuclei under the nuclear statistical equilibrium. We reformulate the model of the light nuclei other than d, t, h and α based on the quasi-particle description. Furthermore, we modify the model so that the temperature dependences of surface and shell energies of heavy nuclei could be taken into account. The pasta phases for heavy nuclei and the Pauli- and self-energy shifts for d, t, h and α are taken into account in the same way as in the previous model. We find that nuclear composition is considerably affected by the modifications in this work, whereas thermodynamical quantities are not changed much. In particular, the washout of shell effect has a great impact on the mass distribution above T ∼ 1 MeV. This improvement may have an important effect on the rates of electron captures and coherent neutrino scatterings on nuclei in supernova cores.

  12. Gender differences in episodic memory and visual working memory including the effects of age.

    Science.gov (United States)

    Pauls, Franz; Petermann, Franz; Lepach, Anja Christina

    2013-01-01

    Analysing the relationship between gender and memory, and examining the effects of age on the overall memory-related functioning, are the ongoing goals of psychological research. The present study examined gender and age group differences in episodic memory with respect to the type of task. In addition, these subgroup differences were also analysed in visual working memory. A sample of 366 women and 330 men, aged between 16 and 69 years of age, participated in the current study. Results indicate that women outperformed men on auditory memory tasks, whereas male adolescents and older male adults showed higher level performances on visual episodic and visual working memory measures. However, the size of gender-linked effects varied somewhat across age groups. Furthermore, results partly support a declining performance on episodic memory and visual working memory measures with increasing age. Although age-related losses in episodic memory could not be explained by a decreasing verbal and visuospatial ability with age, women's advantage in auditory episodic memory could be explained by their advantage in verbal ability. Men's higher level visual episodic memory performance was found to result from their advantage in visuospatial ability. Finally, possible methodological, biological, and cognitive explanations for the current findings are discussed.

  13. Seismic response and fragility evaluation for an Eastern US NPP including soil-structure interaction effects

    International Nuclear Information System (INIS)

    Ghiocel, Dan M.; Wilson, Paul R.; Thomas, Gary G.; Stevenson, John D.

    1998-01-01

    The paper discusses methodological aspects involved in a probabilistic seismic soil-structure interaction (SSI) analysis for a Seismic Probabilistic Risk Assessment (SPRA) review. An example of an Eastern US nuclear power plant (NPP) is presented. The approach presented herein follows the current practice of the Individual Plant Examination for External Events (IPEEE) program in the US. The NPP is founded on a relatively soft soil deposit, and thus the SSI effects on seismic responses are significant. Probabilistic models used for the idealization of the seismic excitation and the surrounding soil deposit are described. Using a lognormal format, computed random variability effects were combined with those proposed in the SPRA methodology guidelines. Probabilistic floor response spectra and structural fragilities for different NPP buildings were computed. Structural capacities were determined following the current practice which assumes independent median safety factors for strength and inelastic absorption. Limitations of the IPEEE practice for performing SPRA are discussed and alternate procedures, more rigorous and simple to implement, are suggested

  14. Environmental impact assessment including indirect effects--a case study using input-output analysis

    International Nuclear Information System (INIS)

    Lenzen, Manfred; Murray, Shauna A.; Korte, Britta; Dey, Christopher J.

    2003-01-01

    Environmental impact assessment (EIA) is a process covered by several international standards, dictating that as many environmental aspects as possible should be identified in a project appraisal. While the ISO 14011 standard stipulates a broad-ranging study, off-site, indirect impacts are not specifically required for an Environmental Impact Statement (EIS). The reasons for this may relate to the perceived difficulty of measuring off-site impacts, or the assumption that these are a relatively insignificant component of the total impact. In this work, we describe a method that uses input-output analysis to calculate the indirect effects of a development proposal in terms of several indicator variables. The results of our case study of a Second Sydney Airport show that the total impacts are considerably higher than the on-site impacts for the indicators land disturbance, greenhouse gas emissions, water use, emissions of NO x and SO 2 , and employment. We conclude that employing input-output analysis enhances conventional EIA, as it allows for national and international effects to be taken into account in the decision-making process

  15. Two phase formation of massive elliptical galaxies: study through cross-correlation including spatial effect

    Science.gov (United States)

    Modak, Soumita; Chattopadhyay, Tanuka; Chattopadhyay, Asis Kumar

    2017-11-01

    Area of study is the formation mechanism of the present-day population of elliptical galaxies, in the context of hierarchical cosmological models accompanied by accretion and minor mergers. The present work investigates the formation and evolution of several components of the nearby massive early-type galaxies (ETGs) through cross-correlation function (CCF), using the spatial parameters right ascension (RA) and declination (DEC), and the intrinsic parameters mass (M_{*}) and size. According to the astrophysical terminology, here these variables, namely mass, size, RA and DEC are termed as parameters, whereas the unknown constants involved in the kernel function are called hyperparameters. Throughout this paper, the parameter size is used to represent the effective radius (Re). Following Huang et al. (2013a), each nearby ETG is divided into three parts on the basis of its Re value. We study the CCF between each of these three components of nearby massive ETGs and the ETGs in the high redshift range, 0.5conflict raised in a previous work (De et al. 2014) suggesting other possibilities for the formation of the outermost part. A probable cause of this improvement is the inclusion of the spatial effects in addition to the other parameters in the study.

  16. Ethical objections against including life-extension costs in cost-effectiveness analysis: a consistent approach.

    Science.gov (United States)

    Gandjour, Afschin; Müller, Dirk

    2014-10-01

    One of the major ethical concerns regarding cost-effectiveness analysis in health care has been the inclusion of life-extension costs ("it is cheaper to let people die"). For this reason, many analysts have opted to rule out life-extension costs from the analysis. However, surprisingly little has been written in the health economics literature regarding this ethical concern and the resulting practice. The purpose of this work was to present a framework and potential solution for ethical objections against life-extension costs. This work found three levels of ethical concern: (i) with respect to all life-extension costs (disease-related and -unrelated); (ii) with respect to disease-unrelated costs only; and (iii) regarding disease-unrelated costs plus disease-related costs not influenced by the intervention. Excluding all life-extension costs for ethical reasons would require-for reasons of consistency-a simultaneous exclusion of savings from reducing morbidity. At the other extreme, excluding only disease-unrelated life-extension costs for ethical reasons would require-again for reasons of consistency-the exclusion of health gains due to treatment of unrelated diseases. Therefore, addressing ethical concerns regarding the inclusion of life-extension costs necessitates fundamental changes in the calculation of cost effectiveness.

  17. Some Design Considerations on the Electrostatically Actuated Fixed-Fixed End Type MEMS Switches

    International Nuclear Information System (INIS)

    Sadeghian, Hamed; Rezazadeh, Ghader; Sani, Ebrahim Abbaspour

    2006-01-01

    The nonlinear electrostatic pull-in behaviour of MEMS Switches in micro-electromechanical systems (MEMS) is investigated in this article. We used the distributed model when the electrostatic pressure didn't apply at the whole of the beam and applied only in the mid-part of the beam. In this part the electrostatic area is different from two other parts. The model uses Euler-Bernoulli beam theory for fixed-fixed end type beams. The finite difference method was used to solve the nonlinear equation. The proposed model includes the fringing effects of the electrical field, residual stress and varying electrostatic area effects. The numerical results reveal that the profile deflection of the MEMS Switch may not only influence the distribution of the electrostatic force but also considerably change the nonlinear pull-in voltage

  18. Multiple Crack Growth Prediction in AA2024-T3 Friction Stir Welded Joints, Including Manufacturing Effects

    DEFF Research Database (Denmark)

    Carlone, Pierpaolo; Citarella, Roberto; Sonne, Mads Rostgaard

    2016-01-01

    A great deal of attention is currently paid by several industries toward the friction stir welding process to realize lightweight structures. Within this aim, the realistic prediction of fatigue behavior of welded assemblies is a key factor. In this work an integrated finite element method - dual...... boundary element method (FEM-DBEM) procedure, coupling the welding process simulation to the subsequent crack growth assessment, is proposed and applied to simulate multiple crack propagation, with allowance for manufacturing effects. The friction stir butt welding process of the precipitation hardened AA...... on a notched specimen. The whole procedure was finally tested comparing simulation outcomes with experimental data. The good agreement obtained highlights the predictive capability of the method. The influence of the residual stress distribution on crack growth and the mutual interaction between propagating...

  19. Theory of tunneling ionization of molecules: Weak-field asymptotics including dipole effects

    DEFF Research Database (Denmark)

    Tolstikhin, Oleg I.; Morishita, Toru; Madsen, Lars Bojer

    2011-01-01

    The formulation of the parabolic adiabatic expansion approach to the problem of ionization of atomic systems in a static electric field, originally developed for the axially symmetric case [ Phys. Rev. A 82 023416 (2010)], is generalized to arbitrary potentials. This approach is used to rederive...... the asymptotic theory of tunneling ionization in the weak-field limit. In the atomic case, the resulting formulas for the ionization rate coincide with previously known results. In addition, the present theory accounts for the possible existence of a permanent dipole moment of the unperturbed system and, hence......, applies to polar molecules. Accounting for dipole effects constitutes an important difference of the present theory from the so-called molecular Ammosov-Delone-Krainov theory. The theory is illustrated by comparing exact and asymptotic results for a set of model polar molecules and a realistic molecular...

  20. Bifurcation of space-charge wave in a plasma waveguide including the wake potential effect

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Myoung-Jae [Department of Physics and Research Institute for Natural Sciences, Hanyang University, Seoul 04763 (Korea, Republic of); Jung, Young-Dae, E-mail: ydjung@hanyang.ac.kr [Department of Applied Physics and Department of Bionanotechnology, Hanyang University, Ansan, Kyunggi-Do 15588, South Korea and Department of Physics, Applied Physics, and Astronomy, Rensselaer Polytechnic Institute, 110 8th Street, Troy, New York 12180-3590 (United States)

    2016-09-15

    The wake potential effects on the propagation of the space-charge dust ion-acoustic wave are investigated in a cylindrically bounded dusty plasma with the ion flow. The results show that the wake potential would generate the double frequency modes in a cylindrically bounded dusty plasma. It is found that the upper mode of the wave frequency with the root of higher-order is smaller than that with the root of lower-order in intermediate wave number domains. However, the lower mode of the scaled wave frequency with the root of higher-order is found to be greater than that with the root of lower-order. It is found that the influence in the order of the root of the Bessel function on the wave frequency of the space-charge dust-ion-acoustic wave in a cylindrically confined dusty plasma decreases with an increase in the propagation wave number. It is also found that the double frequency modes increase with increasing Mach number due to the ion flow in a cylindrical dusty plasma. In addition, it is found that the upper mode of the group velocity decreases with an increase in the scaled radius of the plasma cylinder. However, it is shown that the lower mode of the scaled group velocity of the space-charge dust ion acoustic wave increases with an increase in the radius of the plasma cylinder. The variation of the space-charge dust-ion-acoustic wave due to the wake potential and geometric effects is also discussed.

  1. A methodology for including wall roughness effects in k-ε low-Reynolds turbulence models

    International Nuclear Information System (INIS)

    Ambrosini, W.; Pucciarelli, A.; Borroni, I.

    2015-01-01

    Highlights: • A model for taking into account wall roughness in low-Reynolds k-ε models is presented. • The model is subjected to a first validation to show its potential in general applications. • The application of the model in predicting heat transfer to supercritical fluids is also discussed. - Abstract: A model accounting for wall roughness effects in k-ε low-Reynolds turbulence models is described in the present paper. In particular, the introduction in the transport equations of k and ε of additional source terms related to roughness, based on simple assumptions and dimensional relationships, is proposed. An objective of the present paper, in addition to obtaining more realistic predictions of wall friction, is the application of the proposed model to the study of heat transfer to supercritical fluids. A first validation of the model is reported. The model shows the capability of predicting, at least qualitatively, some of the most important trends observed when dealing with rough pipes in very different flow conditions. Qualitative comparisons with some DNS data available in literature are also performed. Further analyses provided promising results concerning the ability of the model in reproducing the trend of friction factor when varying the flow conditions, though improvements are necessary for achieving better quantitative accuracy. First applications of the model in simulating heat transfer to supercritical fluids are also described, showing the capability of the model to affect the predictions of these heat transfer phenomena, in particular in the vicinity of the pseudo-critical conditions. A more extended application of the model to relevant deteriorated heat transfer conditions will clarify the usefulness of this modelling methodology in improving predictions of these difficult phenomena. Whatever the possible success in this particular application that motivated its development, this approach suggests a general methodology for accounting

  2. Light reflection from a rough liquid surface including wind-wave effects in a scattering atmosphere

    International Nuclear Information System (INIS)

    Salinas, Santo V.; Liew, S.C.

    2007-01-01

    Visible and near-IR images of the ocean surface, taken from remote satellites, often contain important information of near-surface or sub-surface processes, which occur on, or over the ocean. Remote measurements of near surface winds, sea surface temperature and salinity, ocean color and underwater bathymetry, all, one way or another, depend on how well we understand sea surface roughness. However, in order to extract useful information from our remote measurements, we need to construct accurate models of the transfer of solar radiation inside the atmosphere as well as, its reflection from the sea surface. To approach this problem, we numerically solve the radiative transfer equation (RTE) by implementing a model for the atmosphere-ocean system. A one-dimensional atmospheric radiation model is solved via the widely known doubling and adding method and the ocean body is treated as a boundary condition to the problem. The ocean surface is modeled as a rough liquid surface which includes wind interaction and wave states, such as wave age. The model can have possible applications to the retrieval of wind and wave states, such as wave age, near a Sun glint region

  3. An Expanded UV Irradiance Database from TOMS Including the Effects of Ozone, Clouds, and Aerosol Attenuation

    Science.gov (United States)

    Herman, J.; Krotkov, N.

    2003-01-01

    The TOMS UV irradiance database (1978 to 2003) has been expanded to include five new products (noon irradiance at 305,310,324, and 380 nm, and noon erythemal-weighted irradiance), in addition to the existing erythemal daily exposure, that permit direct comparisons with ground-based measurements from spectrometers and broadband instruments. The new data are available on http://toms.gsfc.nasa.gov/>http://toms.gsfc.nasa.gov. Comparisons of the TOMS estimated irradiances with ground-based instruments are given along with a review of the sources of known errors, especially the recent improvements in accounting for aerosol attenuation. Trend estimations from the new TOMS irradiances permit the clear separation of changes caused by ozone and those caused by aerosols and clouds. Systematic differences in cloud cover are shown to be the most important factor in determining regional differences in UV radiation reaching the ground for locations at the same latitude (e.g., the summertime differences between Australia and the US southwest).

  4. A new simple parameterization of daily clear-sky global solar radiation including horizon effects

    International Nuclear Information System (INIS)

    Lopez, Gabriel; Javier Batlles, F.; Tovar-Pescador, Joaquin

    2007-01-01

    Estimation of clear-sky global solar radiation is usually an important previous stage for calculating global solar radiation under all sky conditions. This is, for instance, a common procedure to derive incoming solar radiation from remote sensing or by using digital elevation models. In this work, we present a new model to calculate daily values of clear-sky global solar irradiation. The main goal is the simple parameterization in terms of atmospheric temperature and relative humidity, Angstroem's turbidity coefficient, ground albedo and site elevation, including a factor to take into account horizon obstructions. This allows us to obtain estimates even though a free horizon is not present as is the case of mountainous locations. Comparisons of calculated daily values with measured data show that this model is able to provide a good level of accurate estimates using either daily or mean monthly values of the input parameters. This new model has also been shown to improve daily estimates against those obtained using the clear-sky model from the European Solar Radiation Atlas and other accurate parameterized daily irradiation models. The introduction of Angstroem's turbidity coefficient and ground albedo should allow us to use the increasing worldwide aerosol information available and to consider those sites affected by snow covers in an easy and fast way. In addition, the proposed model is intended to be a useful tool to select clear-sky conditions

  5. 3-D FEM Modeling of fiber/matrix interface debonding in UD composites including surface effects

    International Nuclear Information System (INIS)

    Pupurs, A; Varna, J

    2012-01-01

    Fiber/matrix interface debond growth is one of the main mechanisms of damage evolution in unidirectional (UD) polymer composites. Because for polymer composites the fiber strain to failure is smaller than for the matrix multiple fiber breaks occur at random positions when high mechanical stress is applied to the composite. The energy released due to each fiber break is usually larger than necessary for the creation of a fiber break therefore a partial debonding of fiber/matrix interface is typically observed. Thus the stiffness reduction of UD composite is contributed both from the fiber breaks and from the interface debonds. The aim of this paper is to analyze the debond growth in carbon fiber/epoxy and glass fiber/epoxy UD composites using fracture mechanics principles by calculation of energy release rate G II . A 3-D FEM model is developed for calculation of energy release rate for fiber/matrix interface debonds at different locations in the composite including the composite surface region where the stress state differs from the one in the bulk composite. In the model individual partially debonded fiber is surrounded by matrix region and embedded in a homogenized composite.

  6. Isogeometric analysis of free-form Timoshenko curved beams including the nonlinear effects of large deformations

    Science.gov (United States)

    Hosseini, Seyed Farhad; Hashemian, Ali; Moetakef-Imani, Behnam; Hadidimoud, Saied

    2018-03-01

    In the present paper, the isogeometric analysis (IGA) of free-form planar curved beams is formulated based on the nonlinear Timoshenko beam theory to investigate the large deformation of beams with variable curvature. Based on the isoparametric concept, the shape functions of the field variables (displacement and rotation) in a finite element analysis are considered to be the same as the non-uniform rational basis spline (NURBS) basis functions defining the geometry. The validity of the presented formulation is tested in five case studies covering a wide range of engineering curved structures including from straight and constant curvature to variable curvature beams. The nonlinear deformation results obtained by the presented method are compared to well-established benchmark examples and also compared to the results of linear and nonlinear finite element analyses. As the nonlinear load-deflection behavior of Timoshenko beams is the main topic of this article, the results strongly show the applicability of the IGA method to the large deformation analysis of free-form curved beams. Finally, it is interesting to notice that, until very recently, the large deformations analysis of free-form Timoshenko curved beams has not been considered in IGA by researchers.

  7. Effects of Adiponectin Including Reduction of Androstenedione Secretion and Ovarian Oxidative Stress Parameters In Vivo.

    Directory of Open Access Journals (Sweden)

    Fabio V Comim

    Full Text Available Adiponectin is the most abundantly produced human adipokine with anti-inflammatory, anti-oxidative, and insulin-sensitizing properties. Evidence from in vitro studies has indicated that adiponectin has a potential role in reproduction because it reduces the production of androstenedione in bovine theca cells in vitro. However, this effect on androgen production has not yet been observed in vivo. The current study evaluated the effect of adiponectin on androstenedione secretion and oxidative stress parameters in a rodent model. Seven-week-old female Balb/c mice (n = 33, previously treated with equine gonadotropin chorionic, were assigned to one of four different treatments: Group 1, control (phosphate-buffered saline; Group 2, adiponectin 0.1 μg/mL; Group 3, adiponectin 1.0 μg/mL; Group 4, adiponectin 5.0 μg/mL. After 24 h, all animals were euthanized and androstenedione levels were measured in the serum while oxidative stress markers were quantified in whole ovary tissue. Female mice treated with adiponectin exhibited a significant reduction (about 60% in serum androstenedione levels in comparison to controls. Androstenedione levels decreased from 0.78 ± 0.4 ng/mL (mean ± SD in controls to 0.28 ± 0.06 ng/mL after adiponectin (5 μg/mL treatment (P = 0.01. This change in androgen secretion after 24 hours of treatment was associated with a significant reduction in the expression of CYP11A1 and STAR (but not CYP17A1. In addition, ovarian AOPP product levels, a direct product of protein oxidation, decreased significantly in adiponectin-treated mice (5 μg/mL; AOPP (mean ± SD decreased to 4.3 ± 2.1 μmol/L in comparison with that of the controls (11.5 ± 1.7 μmol/L; P = 0.0003. Our results demonstrated for the first time that acute treatment with adiponectin reduced the levels of a direct oxidative stress marker in the ovary as well as decreased androstenedione serum levels in vivo after 24 h.

  8. Optimization of piezoelectric cantilever energy harvesters including non-linear effects

    International Nuclear Information System (INIS)

    Patel, R; McWilliam, S; Popov, A A

    2014-01-01

    This paper proposes a versatile non-linear model for predicting piezoelectric energy harvester performance. The presented model includes (i) material non-linearity, for both substrate and piezoelectric layers, and (ii) geometric non-linearity incorporated by assuming inextensibility and accurately representing beam curvature. The addition of a sub-model, which utilizes the transfer matrix method to predict eigenfrequencies and eigenvectors for segmented beams, allows for accurate optimization of piezoelectric layer coverage. A validation of the overall theoretical model is performed through experimental testing on both uniform and non-uniform samples manufactured in-house. For the harvester composition used in this work, the magnitude of material non-linearity exhibited by the piezoelectric layer is 35 times greater than that of the substrate layer. It is also observed that material non-linearity, responsible for reductions in resonant frequency with increases in base acceleration, is dominant over geometric non-linearity for standard piezoelectric harvesting devices. Finally, over the tested range, energy loss due to damping is found to increase in a quasi-linear fashion with base acceleration. During an optimization study on piezoelectric layer coverage, results from the developed model were compared with those from a linear model. Unbiased comparisons between harvesters were realized by using devices with identical natural frequencies—created by adjusting the device substrate thickness. Results from three studies, each with a different assumption on mechanical damping variations, are presented. Findings showed that, depending on damping variation, a non-linear model is essential for such optimization studies with each model predicting vastly differing optimum configurations. (paper)

  9. Investigation on plasmonic responses in multilayered nanospheres including asymmetry and spatial nonlocal effects

    Science.gov (United States)

    Dong, Tianyu; Shi, Yi; Liu, Hui; Chen, Feng; Ma, Xikui; Mittra, Raj

    2017-12-01

    In this work, we present a rigorous approach for analyzing the optical response of multilayered spherical nano-particles comprised of either plasmonic metal or dielectric, when there is no longer radial symmetry and when nonlocality is included. The Lorenz-Mie theory is applied, and a linearized hydrodynamic Drude model as well as the general nonlocal optical response model for the metals are employed. Additional boundary conditions, viz., the continuity of normal components of polarization current density and the continuity of first-order pressure of free electron density, respectively, are incorporated when handling interfaces involving metals. The application of spherical addition theorems, enables us to express a spherical harmonic about one origin to spherical harmonics about a different origin, and leads to a linear system of equations for the inward- and outward-field modal coefficients for all the layers in the nanoparticle. Scattering matrices at interfaces are obtained and cascaded to obtain the expansion coefficients, to yield the final solution. Through extensive modelling of stratified concentric and eccentric metal-involved spherical nanoshells illuminating by a plane wave, we show that, within a nonlocal description, significant modifications of plasmonic response appear, e.g. a blue-shift in the extinction / scattering spectrum and a broadening spectrum of the resonance. In addition, it has been demonstrated that core-shell nanostructures provide an option for tunable Fano-resonance generators. The proposed method shows its capability and flexibility to analyze the nonlocal response of eccentric hybrid metal-dielectric multilayer structures as well as adjoined metal-involved nanoparticles, even when the number of layers is large.

  10. ATEFlap aerodynamic model, a dynamic stall model including the effects of trailing edge flap deflection

    Energy Technology Data Exchange (ETDEWEB)

    Bergami, L.; Gaunaa, M.

    2012-02-15

    The report presents the ATEFlap aerodynamic model, which computes the unsteady lift, drag and moment on a 2D airfoil section equipped with Adaptive Trailing Edge Flap. The model captures the unsteady response related to the effects of the vorticity shed into the wake, and the dynamics of flow separation a thin-airfoil potential flow model is merged with a dynamic stall model of the Beddoes-Leishmann type. The inputs required by the model are steady data for lift, drag, and moment coefficients as function of angle of attack and flap deflection. Further steady data used by the Beddoes- Leishmann dynamic stall model are computed in an external preprocessor application, which gives the user the possibility to verify, and eventually correct, the steady data passed to the aerodynamic model. The ATEFlap aerodynamic model is integrated in the aeroelastic simulation tool HAWC2, thus al- lowing to simulate the response of a wind turbine with trailing edge flaps on the rotor. The algorithms used by the preprocessor, and by aerodynamic model are presented, and modifications to previous implementations of the aerodynamic model are briefly discussed. The performance and the validity of the model are verified by comparing the dynamic response computed by the ATEFlap with solutions from CFD simulations. (Author)

  11. Effects of embedment including slip and separation on seismic SSI response of a nuclear reactor building

    International Nuclear Information System (INIS)

    Saxena, Navjeev; Paul, D.K.

    2012-01-01

    Highlights: ► Both the slip and separation of reactor base reduce with increase in embedment. ► The slip and separation become insignificant beyond 1/4 and 1/2 embedment respectively. ► The stresses in reactor reduce significantly upto 1/4 embedment. ► The stress reduction with embedment is more pronounced in case of tensile stresses. ► The modeling of interface is important beyond 1/8 embedment as stresses are underestimated otherwise. - Abstract: The seismic response of nuclear reactor containment building considering the effects of embedment, slip and separation at soil–structure interface requires modeling of the soil, structure and interface altogether. Slip and separation at the interface causes stress redistribution in the soil and the structure around the interface. The embedment changes the dynamic characteristics of the soil–structure system. Consideration of these aspects allows capturing the realistic response of the structure, which has been a research gap and presented here individually as well as taken together. Finite element analysis has been carried out in time domain to attempt the highly nonlinear problem. The study draws important conclusions useful for design of nuclear reactor containment building.

  12. Nonlinear dynamic analysis of framed structures including soil-structure interaction effects

    International Nuclear Information System (INIS)

    Mahmood, M.N.; Ahmed, S.Y.

    2008-01-01

    The role of oil-structure interaction on seismic behavior of reinforced concrete structures is investigated in this paper. A finite element approach has been adopted to model the interaction system that consists of the reinforced concrete plane frame, soil deposit and interface which represents the frictional between foundation of the structure and subsoil. The analysis is based on the elasto-plastic behavior of the frame members (beams and columns) that is defined by the ultimate axial force-bending moment interaction curve, while the cap model is adopted to govern the elasto-plastic behavior of the soil material. Mohr-Coulomb failure law is used to determine the initiation of slippage at the interface, while the separation is assumed to determine the initiation of slippage at the interface, while the separation is assumed to occur when the stresses at the interface becomes tension stresses. New-Mark's Predictor-Corrector algorithm is adopted for nonlinear dynamic analysis. The main aim of present work is to evaluate the sensitivity of structures to different behavior of the soil and interface layer when subjected to an earthquake excitation. Predicted results of the dynamic analysis of the interaction system indicate that the soil-structure interaction problem can have beneficial effects on the structural behavior when different soil models (elastic and elasto-plastic) and interface conditions (perfect bond and permitted slip)are considered. (author)

  13. North american natural gas supply forecast: the Hubbert method including the effects of institutions

    International Nuclear Information System (INIS)

    Reynolds, D. B.; Kolodziej, M.

    2009-01-01

    In this article, the U.S. and southern Canadian natural gas supply market is considered. An important model for oil and natural gas supply is the Hubbert curve. Not all regions of the world are producing oil or natural gas following a Hubbert curve, even when price and market conditions are accounted for. One reason is that institutions are affecting supply. We investigate the possible effects of oil and gas market institutions in North America on natural gas supply. A multi-cycle Hubbert curve with inflection points similar to the Soviet Union's oil production multi-cycle Hubbert curve is used to determine North American natural gas discovery rates and to analyze how market specific institutions caused the inflection points. In addition, we analyze the latest shale natural gas projections critically. While currently, unconventional resources of natural gas suggest that North American natural gas production will increase without bound, the model here suggests a peak in North American natural gas supplies could happen in 2013. (author)

  14. Effect of two Spanish breeds and diet on beef quality including consumer preferences.

    Science.gov (United States)

    Ripoll, Guillermo; Blanco, Mireia; Albertí, Pere; Panea, Begoña; Joy, Margalida; Casasús, Isabel

    2014-03-30

    Farmers in dry mountain areas are changing their management strategies to improve livestock farming efficiency, by using different forages or different breeds. The effect of breed (Parda de Montaña vs. Pirenaica) and finishing diet (grazing on meadows vs. a total mixed ration (50% alfalfa, 40% maize grain, 10% straw)) on carcass characteristics and meat quality of steers was studied. Parda de Montaña had a greater (P < 0.01) amount of intramuscular fat than Pirenaica. The finishing diet did not influence carcass fat color, but fatty acid composition was slightly affected. Finishing steers on a total mixed ration increased the percentage of fat of the 10th rib (P < 0.001). Supplementation with concentrates increased the diet energy concentration and also increased the dressing percentage. Both breeds had similar carcass characteristics. Consumers preferred beef from the Pirenaica breed because of its greater tenderness. Consumers did not differentiate between beef from animals fed different finishing diets. However, consumers who like meat very much preferred meat aged in a cooler at 4 °C for 15 days rather than 8 days. © 2013 Society of Chemical Industry.

  15. Development of Extended Ray-tracing method including diffraction, polarization and wave decay effects

    Science.gov (United States)

    Yanagihara, Kota; Kubo, Shin; Dodin, Ilya; Nakamura, Hiroaki; Tsujimura, Toru

    2017-10-01

    Geometrical Optics Ray-tracing is a reasonable numerical analytic approach for describing the Electron Cyclotron resonance Wave (ECW) in slowly varying spatially inhomogeneous plasma. It is well known that the result with this conventional method is adequate in most cases. However, in the case of Helical fusion plasma which has complicated magnetic structure, strong magnetic shear with a large scale length of density can cause a mode coupling of waves outside the last closed flux surface, and complicated absorption structure requires a strong focused wave for ECH. Since conventional Ray Equations to describe ECW do not have any terms to describe the diffraction, polarization and wave decay effects, we can not describe accurately a mode coupling of waves, strong focus waves, behavior of waves in inhomogeneous absorption region and so on. For fundamental solution of these problems, we consider the extension of the Ray-tracing method. Specific process is planned as follows. First, calculate the reference ray by conventional method, and define the local ray-base coordinate system along the reference ray. Then, calculate the evolution of the distributions of amplitude and phase on ray-base coordinate step by step. The progress of our extended method will be presented.

  16. Interpretation of vector magnetograph data including magneto-optic effects. Pt. 1

    International Nuclear Information System (INIS)

    West, E.A.; Hagyard, J.; National Aeronautics and Space Administration, Huntsville, AL

    1983-01-01

    In this paper, the presence of Faraday rotation in measurements of orientation of a sunspot's transvese magnetic field is investigated. Using observations obtained with the Marshall Space Flight Center's (MSFC) vector magnetograph, the derived vector magnetic field of a simple, symmetric sunspot is used to calculate the degree of Faraday rotation in the azimuth of the transverse field as a function of wavelength from analytical expressions for the Stokes parameters. These results are then compared with the observed rotation of the field's azimuth which is derived from observations at different wavelengths within the Fe sub(I) 5250 A spectral line. From these comparisons, we find: the observed rotation of the azimuth is simulated to a reasonable degree by the theoretical formulations if the line-formation parameter eta 0 is varied over the sunspot; these variations in eta 0 are substantiated by the line-intensity data; for the MSFC system, Faraday rotation can be neglected for field strengths less than 1800 G and field inclinations greater than 45 0 ; to minimize the effects of Faraday rotation in sunspot umbrae, MSFC magnetograph measurements must be made in the far wings of the Zeeman-sensitive spectral line. (orig.)

  17. CERN: Fixed target targets

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    Full text: While the immediate priority of CERN's research programme is to exploit to the full the world's largest accelerator, the LEP electron-positron collider and its concomitant LEP200 energy upgrade (January, page 1), CERN is also mindful of its long tradition of diversified research. Away from LEP and preparations for the LHC proton-proton collider to be built above LEP in the same 27-kilometre tunnel, CERN is also preparing for a new generation of heavy ion experiments using a new source, providing heavier ions (April 1992, page 8), with first physics expected next year. CERN's smallest accelerator, the LEAR Low Energy Antiproton Ring continues to cover a wide range of research topics, and saw a record number of hours of operation in 1992. The new ISOLDE on-line isotope separator was inaugurated last year (July, page 5) and physics is already underway. The remaining effort concentrates around fixed target experiments at the SPS synchrotron, which formed the main thrust of CERN's research during the late 1970s. With the SPS and LEAR now approaching middle age, their research future was extensively studied last year. Broadly, a vigorous SPS programme looks assured until at least the end of 1995. Decisions for the longer term future of the West Experimental Area of the SPS will have to take into account the heavy demand for test beams from work towards experiments at big colliders, both at CERN and elsewhere. The North Experimental Area is the scene of larger experiments with longer lead times. Several more years of LEAR exploitation are already in the pipeline, but for the longer term, the ambitious Superlear project for a superconducting ring (January 1992, page 7) did not catch on. Neutrino physics has a long tradition at CERN, and this continues with the preparations for two major projects, the Chorus and Nomad experiments (November 1991, page 7), to start next year in the West Area. Delicate neutrino oscillation effects could become

  18. Probabilistic and deterministic soil structure interaction analysis including ground motion incoherency effects

    International Nuclear Information System (INIS)

    Elkhoraibi, T.; Hashemi, A.; Ostadan, F.

    2014-01-01

    Soil-structure interaction (SSI) is a major step for seismic design of massive and stiff structures typical of the nuclear facilities and civil infrastructures such as tunnels, underground stations, dams and lock head structures. Currently most SSI analyses are performed deterministically, incorporating limited range of variation in soil and structural properties and without consideration of the ground motion incoherency effects. This often leads to overestimation of the seismic response particularly the In-Structure-Response Spectra (ISRS) with significant impositions of design and equipment qualification costs, especially in the case of high-frequency sensitive equipment at stiff soil or rock sites. The reluctance to incorporate a more comprehensive probabilistic approach is mainly due to the fact that the computational cost of performing probabilistic SSI analysis even without incoherency function considerations has been prohibitive. As such, bounding deterministic approaches have been preferred by the industry and accepted by the regulatory agencies. However, given the recently available and growing computing capabilities, the need for a probabilistic-based approach to the SSI analysis is becoming clear with the advances in performance-based engineering and the utilization of fragility analysis in the decision making process whether by the owners or the regulatory agencies. This paper demonstrates the use of both probabilistic and deterministic SSI analysis techniques to identify important engineering demand parameters in the structure. A typical nuclear industry structure is used as an example for this study. The system is analyzed for two different site conditions: rock and deep soil. Both deterministic and probabilistic SSI analysis approaches are performed, using the program SASSI, with and without ground motion incoherency considerations. In both approaches, the analysis begins at the hard rock level using the low frequency and high frequency hard rock

  19. Probabilistic and deterministic soil structure interaction analysis including ground motion incoherency effects

    Energy Technology Data Exchange (ETDEWEB)

    Elkhoraibi, T., E-mail: telkhora@bechtel.com; Hashemi, A.; Ostadan, F.

    2014-04-01

    Soil-structure interaction (SSI) is a major step for seismic design of massive and stiff structures typical of the nuclear facilities and civil infrastructures such as tunnels, underground stations, dams and lock head structures. Currently most SSI analyses are performed deterministically, incorporating limited range of variation in soil and structural properties and without consideration of the ground motion incoherency effects. This often leads to overestimation of the seismic response particularly the In-Structure-Response Spectra (ISRS) with significant impositions of design and equipment qualification costs, especially in the case of high-frequency sensitive equipment at stiff soil or rock sites. The reluctance to incorporate a more comprehensive probabilistic approach is mainly due to the fact that the computational cost of performing probabilistic SSI analysis even without incoherency function considerations has been prohibitive. As such, bounding deterministic approaches have been preferred by the industry and accepted by the regulatory agencies. However, given the recently available and growing computing capabilities, the need for a probabilistic-based approach to the SSI analysis is becoming clear with the advances in performance-based engineering and the utilization of fragility analysis in the decision making process whether by the owners or the regulatory agencies. This paper demonstrates the use of both probabilistic and deterministic SSI analysis techniques to identify important engineering demand parameters in the structure. A typical nuclear industry structure is used as an example for this study. The system is analyzed for two different site conditions: rock and deep soil. Both deterministic and probabilistic SSI analysis approaches are performed, using the program SASSI, with and without ground motion incoherency considerations. In both approaches, the analysis begins at the hard rock level using the low frequency and high frequency hard rock

  20. Effects of Cement, Abutment Surface Pretreatment, and Artificial Aging on the Force Required to Detach Cantilever Fixed Dental Prostheses from Dental Implants.

    Science.gov (United States)

    Kappel, Stefanie; Chepura, Taras; Schmitter, Marc; Rammelsberg, Peter; Rues, Stefan

    To examine the in vitro effects of different cements, abutment surface preconditioning, and artificial aging on the maximum tensile force needed to detach cantilever fixed dental prostheses (FDPs) from dental implants with titanium abutments. A total of 32 tissue-level implants were combined with standardized titanium abutments. For each test group, eight cantilever FDPs were fabricated using selective laser melting (cobalt-chromium [CoCr] alloy). The inner surfaces of the cantilever FDPs and half of the abutments were sandblasted and then joined by use of four different cements (two permanent and two semi-permanent) in two different amounts per cement. Subgroups were tested after either artificial aging (thermocycling and chewing simulation) or 3 days of water storage. Finally, axial pull off-tests were performed for each abutment separately. Cement type and surface pretreatment significantly affected decementation behavior. The highest retention forces (approximately 1,200 N) were associated with sandblasted abutments and permanent cements. With unconditioned abutments, temporary cements (Fu cement (Fu ≈ 100 N), resulted in rather low retention forces. Zinc phosphate cement guaranteed high retention forces. After aging, retention was sufficient only for cementation with zinc phosphate cement and for the combination of sandblasted abutments and glass-ionomer cement. When glass-ionomer cement is used to fix cantilever FDPs on implants, sandblasting of standard titanium abutments may help prevent loss of retention. Retention forces were still high for FDPs fixed with zinc phosphate cement, even when the abutments were not pretreated. Use of permanent cements only, however, is recommended to prevent unwanted loosening of cantilever FDPs.

  1. Fatigue Behavior under Multiaxial Stress States Including Notch Effects and Variable Amplitude Loading

    Science.gov (United States)

    Gates, Nicholas R.

    The central objective of the research performed in this study was to be able to better understand and predict fatigue crack initiation and growth from stress concentrations subjected to complex service loading histories. As such, major areas of focus were related to the understanding and modeling of material deformation behavior, fatigue damage quantification, notch effects, cycle counting, damage accumulation, and crack growth behavior under multiaxial nominal loading conditions. To support the analytical work, a wide variety of deformation and fatigue tests were also performed using tubular and plate specimens made from 2024-T3 aluminum alloy, with and without the inclusion of a circular through-thickness hole. However, the analysis procedures implemented were meant to be general in nature, and applicable to a wide variety of materials and component geometries. As a result, experimental data from literature were also used, when appropriate, to supplement the findings of various analyses. Popular approaches currently used for multiaxial fatigue life analysis are based on the idea of computing an equivalent stress/strain quantity through the extension of static yield criteria. This equivalent stress/strain is then considered to be equal, in terms of fatigue damage, to a uniaxial loading of the same magnitude. However, it has often been shown, and was shown again in this study, that although equivalent stress- and strain-based analysis approaches may work well in certain situations, they lack a general robustness and offer little room for improvement. More advanced analysis techniques, on the other hand, provide an opportunity to more accurately account for various aspects of the fatigue failure process under both constant and variable amplitude loading conditions. As a result, such techniques were of primary interest in the investigations performed. By implementing more advanced life prediction methodologies, both the overall accuracy and the correlation of fatigue

  2. Fixed target flammable gas upgrades

    International Nuclear Information System (INIS)

    Schmitt, R.; Squires, B.; Gasteyer, T.; Richardson, R.

    1996-12-01

    In the past, fixed target flammable gas systems were not supported in an organized fashion. The Research Division, Mechanical Support Department began to support these gas systems for the 1995 run. This technical memo describes the new approach being used to supply chamber gasses to fixed target experiments at Fermilab. It describes the engineering design features, system safety, system documentation and performance results. Gas mixtures provide the medium for electron detection in proportional and drift chambers. Usually a mixture of a noble gas and a polyatomic quenching gas is used. Sometimes a small amount of electronegative gas is added as well. The mixture required is a function of the specific chamber design, including working voltage, gain requirements, high rate capability, aging and others. For the 1995 fixed target run all the experiments requested once through gas systems. We obtained a summary of problems from the 1990 fixed target run and made a summary of the operations logbook entries from the 1991 run. These summaries primarily include problems involving flammable gas alarms, but also include incidents where Operations was involved or informed. Usually contamination issues were dealt with by the experimenters. The summaries are attached. We discussed past operational issues with the experimenters involved. There were numerous incidents of drift chamber failure where contaminated gas was suspect. However analyses of the gas at the time usually did not show any particular problems. This could have been because the analysis did not look for the troublesome component, the contaminant was concentrated in the gas over the liquid and vented before the sample was taken, or that contaminants were drawn into the chambers directly through leaks or sub-atmospheric pressures. After some study we were unable to determine specific causes of past contamination problems, although in argon-ethane systems the problems were due to the ethane only

  3. Effect of 5% benzocaine gel on relieving pain caused by fixed orthodontic appliance activation. A double-blind randomized controlled trial.

    Science.gov (United States)

    Eslamian, L; Gholami, H; Mortazavi, S A R; Soheilifar, S

    2016-11-01

    To compare the effectiveness of 5% benzocaine gel and placebo gel on reducing pain caused by fixed orthodontic appliance activation. Thirty subjects (15-25 years) undergoing fixed orthodontics. A randomized, double-blind, placebo-controlled and cross-over clinical trial study was conducted. Subjects were asked to apply a placebo gel and 5% benzocaine gel, exchangeable in two consecutive appointments, twice a day for 3 days and mark their level of pain on a VAS scale. The pain severity was evaluated by means of Mann-Whitney U-test for comparing two gel groups, Kruskal-Wallis nonparametric test for overall differences and post hoc test of Dunnett for paired multiple comparisons. p-value was assigned test indicated that there was no significant difference between overall pain in both groups (mean difference = 0.258 p ˂ 0.21). For both groups, pain intensity was significantly lower at 2, 6 and 24 h compared with pain experienced at days 2, 3 and 7. Benzocaine gel caused a decrease in pain perception at 2 h compared with placebo gel. Peak pain intensity was at 2 h for placebo gel and at 6 h for benzocaine gel, followed by a decline in pain perception from that point to day 7 for both gels. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  4. Effects of long-term elevated CO2 on N2-fixing, denitrifying and nitrifying enzyme activities in forest soils under Pinus sylvestriformis in Changbai Mountain

    Institute of Scientific and Technical Information of China (English)

    ZHENG Jun-Qiang; HAN Shi-Jie; REN Fei-Rong; ZHOU Yu-Mei; ZHANG Yan

    2008-01-01

    A study was conducted to determine the effects of elevated CO2 on soil N process at Changbai Mountain in Jilin Province,northeastern China (42o24'N,128o06'E,and 738 m elevation).A randomized complete block design of ambient and elevated CO2 was established in an open-top chamber facility in the spring of 1999.Changpai Scotch pine (Pinus sylvestris var.sylvestriformis seeds were sowed in May,1999 and CO2 fumigation treatments began after seeds germination.In each year,the exposure started at the end of April and stopped at the end of October.Soil samples were collected in June and August 2006 and in June 2007,and soil nitrifying,denitrifying and N2-fixing enzyme activities were measured.Results show that soil nitrifying enzyme activities (NEA) in the 5-10 cm soil layer were significantly increased at elevated CO2 by 30.3% in June 2006,by 30.9% in August 2006 and by 11.3% in June 2007.Soil denitrifying enzyme activities (DEA) were significantly decreased by elevated CO2 treatment in June 2006 (P < 0.012) and August 2006 (P < 0.005) samplings in our study; no significant difference was detected in June 2007,and no significant changes in N2-fixing enzyme activity were found.This study suggests that elevated CO2 can alter soil nitrifying enzyme and denitrifying enzyme activities.

  5. FIXING HEALTH SYSTEMS / Executive Summary (2008 update ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2010-12-14

    Dec 14, 2010 ... FIXING HEALTH SYSTEMS / Executive Summary (2008 update) ... In several cases, specific approaches recommended by the TEHIP team have been acted upon regionally and internationally, including the ... Related articles ...

  6. Additive intraocular pressure-lowering effect of dorzolamide 1%/timolol 0.5% fixed combination on prostaglandin monotherapy in patients with normal tension glaucoma

    Directory of Open Access Journals (Sweden)

    Mizoguchi T

    2011-10-01

    Full Text Available Takanori Mizoguchi1, Mineo Ozaki2, Harumi Wakiyama1,3, Nobuchika Ogino11Mizoguchi Eye Clinic, Sasebo, 2Ozaki Eye Clinic and Dept of Opthalmology, Faculty of Medicine, University of Miyazaki, Miyazaki, 3The Japanese Red Cross Nagasaki Genbaku Hospital, Nagasaki, JapanPurpose: To evaluate the intraocular pressure (IOP-lowering effect of adding dorzolamide 1.0%/timolol 0.5% fixed combination (DTFC to prostaglandin analogs (PGAs as monotherapy in patients with normal tension glaucoma.Methods: A prospective, clinical, case-controlled study of patients with normal tension glaucoma. Patients had been on a once-daily night dose of prostaglandins (PGs as monotherapy and then received DTFC added to PGs for 8 weeks. The IOP was measured at 9 am, week 0 (baseline, week 4, and week 8.Results: The baseline IOP of 40 patients who had previously been treated by prostaglandin monotherapy was 15.6 ± 2.0 mmHg at baseline. The IOPs at 4 and 8 weeks after adding DTFC to PGs were 13.5 ± 2.1 mmHg and 13.7 ± 2.2 mmHg, respectively. Significant decrease of the IOP was observed at each time point of measurement as compared with the baseline IOP before adding DTFC (P = 0.01. The percent IOP reduction from the baseline IOP at week 4 and week 8 was 13.5% ± 12.3% and 11.7% ± 13.1%, respectively. The percentage of patients who achieved 10% or more IOP reduction from the baseline IOP at week 8 was 62.5%. The baseline IOP was significantly correlated with the percent IOP reduction at week 8 (P = 0.03, r = 0.34.Conclusion: DTFC therapy added to PGAs as glaucoma monotherapy is effective in patients with normal tension glaucoma.Keywords: IOP-lowering effect, prostaglandin, dorzolamide 1%/timolol 0.5% fixed combination, fixed combination, normal tension glaucoma

  7. Least fixed points revisited

    NARCIS (Netherlands)

    J.W. de Bakker (Jaco)

    1975-01-01

    textabstractParameter mechanisms for recursive procedures are investigated. Contrary to the view of Manna et al., it is argued that both call-by-value and call-by-name mechanisms yield the least fixed points of the functionals determined by the bodies of the procedures concerned. These functionals

  8. Effectiveness and Safety of Generic Fixed-Dose Combination of Tenofovir/Emtricitabine/Efavirenz in HIV-1-Infected Patients in Western India.

    Science.gov (United States)

    Pujari, Sanjay; Dravid, Ameet; Gupte, Nikhil; Joshix, Kedar; Bele, Vivek

    2008-08-20

    To assess effectiveness and safety of a generic fixed-dose combination of tenofovir (TDF)/emtricitabine (FTC)/efavirenz (EFV) among HIV-1-infected patients in Western India. Antiretroviral (ARV)-naive and experienced (thymidine analog nucleoside reverse transcriptase inhibitor [tNRTI] replaced by TDF) patients were started on a regimen of 1 TDF/FTC/EFV pill once a day. They were followed clinically on a periodic basis, and viral loads and CD4 counts were measured at 6 and 12 months. Creatinine clearance was calculated at baseline and at 6 months and/or as clinically indicated. Effectiveness was defined as not having to discontinue the regimen due to failure or toxicity. One hundred forty-one patients who started TDF/FTC/EFV before 1 June 2007 were eligible. Of these, 130 (92.2%) and 44 (31.2%) had 6- and 12-months follow-up, respectively. Thirty-five percent of the patients were ARV-naive. Eleven patients discontinued treatment (4 for virologic failure, 1 for grade 3-4 central nervous system disturbances, 4 for grade 3-4 renal toxicity, and 2 for cost). Ninety-six percent of patients were virologically suppressed at 6 months. Frequency of TDF-associated grade 3-4 renal toxicity was 2.8%; however, 3 of these patients had comorbid conditions associated with renal dysfunction. A fixed-dose combination of generic TDF/FTC/EFV is effective in ARV-naive and experienced patients. Although frequency of severe renal toxicity was higher than has been reported in the literature, it was safe in patients with no comorbid renal conditions.

  9. Characterizing fixed points

    Directory of Open Access Journals (Sweden)

    Sanjo Zlobec

    2017-04-01

    Full Text Available A set of sufficient conditions which guarantee the existence of a point x⋆ such that f(x⋆ = x⋆ is called a "fixed point theorem". Many such theorems are named after well-known mathematicians and economists. Fixed point theorems are among most useful ones in applied mathematics, especially in economics and game theory. Particularly important theorem in these areas is Kakutani's fixed point theorem which ensures existence of fixed point for point-to-set mappings, e.g., [2, 3, 4]. John Nash developed and applied Kakutani's ideas to prove the existence of (what became known as "Nash equilibrium" for finite games with mixed strategies for any number of players. This work earned him a Nobel Prize in Economics that he shared with two mathematicians. Nash's life was dramatized in the movie "Beautiful Mind" in 2001. In this paper, we approach the system f(x = x differently. Instead of studying existence of its solutions our objective is to determine conditions which are both necessary and sufficient that an arbitrary point x⋆ is a fixed point, i.e., that it satisfies f(x⋆ = x⋆. The existence of solutions for continuous function f of the single variable is easy to establish using the Intermediate Value Theorem of Calculus. However, characterizing fixed points x⋆, i.e., providing answers to the question of finding both necessary and sufficient conditions for an arbitrary given x⋆ to satisfy f(x⋆ = x⋆, is not simple even for functions of the single variable. It is possible that constructive answers do not exist. Our objective is to find them. Our work may require some less familiar tools. One of these might be the "quadratic envelope characterization of zero-derivative point" recalled in the next section. The results are taken from the author's current research project "Studying the Essence of Fixed Points". They are believed to be original. The author has received several feedbacks on the preliminary report and on parts of the project

  10. THE EFFECTS OF FIXED-TERM EMPLOYMENT SPELLS ON THE INTEGRATION OF SCHOOL-LEAVERS ON THE LABOUR MARKET: EVIDENCE FROM FRANCE

    Directory of Open Access Journals (Sweden)

    Oana Calavrezo

    2007-12-01

    Full Text Available In this paper, we investigate the impact of fixed term employment spells (fixed-term contracts and temporary work on the integration on the labour market (translated by the transition to a permanent contract for French school-leavers. We study, at the same time, the impact of three categories of determinants on the schoolleavers' integration on the labour market: individual's features, a first fixed-term employment spell and a later fixed-term employment episode. More precisely, by taking into account the fixed-term employment spell duration, we identify four possible trajectories and we examine if fixed term employment is a "stepping-stone" to permanent employment. In order to control for possible endogeneity biases, trivariate probit models are implemented on a sample of 11 303 individuals obtained from the French "Generation 98" survey.

  11. A comparison of approaches for simultaneous inference of fixed effects for multiple outcomes using linear mixed models

    DEFF Research Database (Denmark)

    Jensen, Signe Marie; Ritz, Christian

    2018-01-01

    Longitudinal studies with multiple outcomes often pose challenges for the statistical analysis. A joint model including all outcomes has the advantage of incorporating the simultaneous behavior but is often difficult to fit due to computational challenges. We consider 2 alternative approaches to ......, pairwise fitting shows a larger loss in efficiency than the marginal models approach. Using an alternative to the joint modelling strategy will lead to some but not necessarily a large loss of efficiency for small sample sizes....

  12. Self-paced versus fixed speed walking and the effect of virtual reality in children with cerebral palsy

    NARCIS (Netherlands)

    Sloot, L.H.; Harlaar, J.; van der Krogt, M.M.

    2015-01-01

    While feedback-controlled treadmills with a virtual reality could potentially offer advantages for clinical gait analysis and training, the effect of self-paced walking and the virtual environment on the gait pattern of children and different patient groups remains unknown. This study examined the

  13. Fixing the Mirrors: A Feasibility Study of the Effects of Dance Movement Therapy on Young Adults with Autism Spectrum Disorder

    Science.gov (United States)

    Koch, Sabine C.; Mehl, Laura; Sobanski, Esther; Sieber, Maik; Fuchs, Thomas

    2015-01-01

    From the 1970s on, case studies reported the effectiveness of therapeutic mirroring in movement with children with autism spectrum disorder. In this feasibility study, we tested a dance movement therapy intervention based on mirroring in movement in a population of 31 young adults with autism spectrum disorder (mainly high-functioning and…

  14. Administration route-dependent effects of estrogens on IGF-I levels during fixed GH replacement in women with hypopituitarism

    NARCIS (Netherlands)

    van der Klaauw, Agatha A.; Biermasz, Nienke R.; Zelissen, Pierre M. J.; Pereira, Alberto M.; Lentjes, Eef G. W. M.; Smit, Johannes W. A.; van Thiel, Sjoerd W.; Romijn, Johannes A.; Roelfsema, Ferdinand

    2007-01-01

    GH-deficient women using oral estradiol treatment require higher doses of recombinant human GH (rhGH) to achieve similar IGF-I levels when compared with men and women on transdermal estradiol replacement. The aim of this study was to evaluate the effects of oral versus transdermal estrogen

  15. Fixed prosthetic treatment in patients with cleft lip and palate

    Directory of Open Access Journals (Sweden)

    Bajevska Jagoda

    2017-01-01

    Full Text Available Introduction. The prosthetic treatment of patients with cleft palate includes various treatment options such as fixed partial dentures, removable partial prosthesis, etc. The type of prosthetic appliance is determined by the oral health of each individual and the circumstances. We presented three adult patients with the cleft lip and palate subjected to prosthetic treatment. Case report. From the possible prosthetic solutions according to the conditions in the oral cavity and the circumstances, fixed partial dentures veneered with composite or ceramic were chosen. A proper relationship between the teeth was reached with the fixed partial dentures, and function established, the phonetics improved and satisfying aesthetics effect accomplished improving the profile appearance of the patient’s face. Plastic surgery of the nose was performed after that. Conclusion. Multidisclipinary treatment is necessary for favourable long-term outcome in cleft lip and palate patients.

  16. A reanalysis of a behavioral intervention to prevent incident HIV infections: Including indirect effects in modeling outcomes of Project EXPLORE

    Science.gov (United States)

    Eaton, Lisa A.; Kalichman, Seth C.; Kenny, David A.; Harel, Ofer

    2013-01-01

    Background Project EXPLORE -- a large-scale, behavioral intervention tested among men who have sex with men (MSM) at-risk for HIV infection --was generally deemed as ineffective in reducing HIV incidence. Using novel and more precise data analytic techniques we reanalyzed Project EXPLORE by including both direct and indirect paths of intervention effects. Methods Data from 4,296 HIV negative MSM who participated in Project EXPLORE, which included ten sessions of behavioral risk reduction counseling completed from 1999-2005, were included in the analysis. We reanalyzed the data to include parameters that estimate the overtime effects of the intervention on unprotected anal sex and the over-time effects of the intervention on HIV status mediated by unprotected anal sex simultaneously in a single model. Results We found the indirect effect of intervention on HIV infection through unprotected anal sex to be statistically significant up through 12 months post-intervention, OR=.83, 95% CI=.72-.95. Furthermore, the intervention significantly reduced unprotected anal sex up through 18 months post-intervention, OR=.79, 95% CI=.63-.99. Discussion Our results reveal effects not tested in the original model that offer new insight into the effectiveness of a behavioral intervention for reducing HIV incidence. Project EXPLORE demonstrated that when tested against an evidence-based, effective control condition can result in reductions in rates of HIV acquisition at one year follow-up. Findings highlight the critical role of addressing behavioral risk reduction counseling in HIV prevention. PMID:23245226

  17. Regulatory requirements for marketing fixed dose combinations

    Directory of Open Access Journals (Sweden)

    B G Jayasheel

    2010-01-01

    Full Text Available The development of fixed-dose combinations (FDCs is becoming increasingly important from a public health perspective. FDCs have advantages when there is an identifiable patient population for whom treatment with a particular combination of actives in a fixed ratio is safe and effective and when all of the actives contribute to the overall therapeutic effect. Such combinations of drugs are particularly useful in the management of chronic diseases. In addition, there can be real clinical benefits in the form of increased efficacy and/or a reduced incidence of adverse effects. Additional advantages of FDCs are potentially lower costs of manufacturing compared to the costs of producing separate products administered concurrently, simpler logistics of distribution and reduced development of resistance in the case of antimicrobials. Above all, FDC therapy reduces pill burden and improves medication compliance. Although, FDCs seem to be ideal under certain pre-defined circumstances, if a dosing adjustment is warranted, there may not be an FDC available in the most appropriate strength for the patient and if an adverse drug reaction occurs from using an FDC, it may be difficult to identify the active ingredient responsible for causing the reaction. Appendix VI of Schedule Y (Drugs & Cosmetics Rules 1945, India states the requirements for marketing approval of various types of FDCs. The same is further elaborated in this article to provide a detailed guidance including the clinical trial requirements. However, the heterogeneity of the therapeutic field makes it difficult to develop a standard guidance document.

  18. [Effectiveness of the transparent sterile dressing vs standard to fix the peripheral venous catheter (PVC) on the incidence of phlebitis. A randomized controlled trial].

    Science.gov (United States)

    Forni, Cristiana; D'Alessandro, Fabio; Gambino, Orazio; Amodeo, Alfredo; Pignotti, Elettra; Zanotti, Enrichetta; Tremosini, Morena; Trofa, Carmela; Sabattini, Tania; Matino, Federica; Genco, Rossana; Schiavone, Miguel; Bombino, Caterina; Mini, Sandra; Rocchegiani, Laura; Notarnicola, Teresa; Capezzali, Daniela; Boschi, Rita; Loro, Loretta

    2012-01-01

    Effectiveness of the transparent sterile dressing vs standard to fix the peripheral venous catheter (PVC), on the incidence of phlebitis. A randomized controlled trial. The type of dressing could contribute to the incidence of phlebitis, infiltration and accidental removals but the results of the studies are contrasting and samples are limited. To compare the effectiveness of a transparent polyurethane sterile dressing on the rate of phlebitis associated to peripheral venous catheter (PVC) vs a non sterile sticking plaster in use in current practice (standard dressing). Randomized controlled trial. Participants. 1061 PVCs (703 patients, adults and children) at a research orthopedic hospital in the north of Italy; 540 PVCs allocated to receive the sterile and 521 the standard dressing. 96 PVCs were excluded for phlebitis, 48 (9.6%) in the sterile and 48 (10.1%) in the standard dressing group, RR 0.96 (95%CI 0.697 - 1.335). Accidental removal of the PVCs was more frequent with the sterile dressing (9.6% vs 6.3%) but the number of catheters removed without complications was larger in the standard dressing group (48.9% vs 54.9% P=0.0503). Eighty-five PVCs were replaced for detachment of the dressing (50, 9.2% sterile and 35, 6.7% standard dressing). The cheapest transparent sterile dressing costs 32 cents while the standard 9 cents. A sticking non sterile plasters is not influential on the rate of phlebitis and ensures an good fix of the PVC compared the transparent sterile dressing to of polyurethane film.

  19. Special Operations Forces Aviation on a Shoestring Budget: An Effectiveness Analysis of Light and Medium Fixed Wing Aircraft

    Science.gov (United States)

    2012-12-01

    Survivability Equipment ATK Alliant Techsystems Incorporated AVPOL Aviation, Petroleum, Oils and Lubrications BDA Battle Damage Assessment...7110.65U effective 9 February 2012, retrieved 25 March 2012, http://www.faa.gov/documentLibrary/ media /Notice/ N7110.525.pdf. 5 passenger configuration...www.faa.gov/documentLibrary/ media /Notice/ND/ N%20JO%207110.478.pdf. 11 EuroControl, “Revising wake turbulence categories to gain capacity

  20. Education as the (not so) great equalizer : new evidence based on a parental fixed effect analysis for Spain

    OpenAIRE

    BERNARDI, Fabrizio; ARES, Macarena

    2017-01-01

    We investigate whether coming from a higher socio-economic background is associated with greater labour market success, net of own achieved education. We replicate previous analyses on the direct effect of social origin, net of education, for Spain using a more recent and larger dataset that consists of the merged monthly barometer surveys by the Centro de Investigaciones Sociológicas. Compared to previous studies, we use a more refined classification for the respondent’s education and perfor...

  1. Effect of body weight on fixed dose of diclofenac for the prevention of post-endoscopic retrograde cholangiopancreatography pancreatitis

    DEFF Research Database (Denmark)

    Leerhøy, Bonna; Nordholm-Carstensen, Andreas; Novovic, Srdjan

    2016-01-01

    in patients without PEP (74 ± 18 kg) (p = 0.029). In patients not receiving prophylaxis, body weight was not associated with the occurrence of PEP (mean ± SD: 77 ± 18 vs 75 ± 18 kg, respectively, p = 0.450). In an adjusted analysis, higher patient body weight was inversely associated with the clinical effect...

  2. Comparative effectiveness of ACC-deaminase and/or nitrogen-fixing rhizobacteria in promotion of maize (Zea mays L.) growth under lead pollution.

    Science.gov (United States)

    Hassan, Waseem; Bano, Rizwana; Bashir, Farhat; David, Julie

    2014-09-01

    Lead (Pb) pollution is appearing as an alarming threat nowadays. Excessive Pb concentrations in agricultural soils result in minimizing the soil fertility and health which affects the plant growth and leads to decrease in crop production. Plant growth promoting rhizobacteria (PGPR) are beneficial bacteria which can protect the plants against many abiotic stresses, and enhance the growth. The study aimed to identify important rhizobacterial strains by using the 1-aminocyclopropane-1-carboxylate (ACC) enrichment technique and examine their inoculation effects in the growth promotion of maize, under Pb pollution. A pot experiment was conducted and six rhizobacterial isolates were used. Pb was added to 2 kg soil in each pot (with 4 seeds/pot) using Pb(NO3)2 at the rate of 0, 100, 200, 300, and 400 mg kg(-1) Pb with three replications in completely randomized design. Rhizobacterial isolates performed significantly better under all Pb levels, i.e., 100 to 400 Pb mg kg(-1) soil, compared to control. Comparing the efficacy of the rhizobacterial isolates under different Pb levels, rhizobacterial isolates having both ACC-deaminase and nitrogen-fixing activities (AN8 and AN12) showed highest increase in terms of the physical, chemical and enzymatic growth parameters of maize, followed by the rhizobacterial isolates having ACC-deaminase activity only (ACC5 and ACC8), and then the nitrogen-fixing rhizobia (Azotobacter and RN5). However, the AN8 isolate showed maximum efficiency, and highest shoot and root length (14.2 and 6.1 cm), seedling fresh and dry weights (1.91 and 0.14 g), chlorophyll a, b, and carotenoids (24.1, 30.2 and 77.7 μg/l), protein (0.82 mg/g), proline (3.42 μmol/g), glutathione S-transferase, peroxidase and catalase (12.3, 4.2 and 7.2 units/mg protein), while the lowest Pb uptake in the shoot and root (0.83 and 0.48 mg/kg) were observed under this rhizobial isolate at the highest Pb level (i.e., 400 Pb mg kg(-1) soil). The results revealed that PGPR

  3. Effects of Nitrogen Fixing Pre-Crops and Fertilizers on Physical and Chemical Properties Down the Soil Profile

    Science.gov (United States)

    Hobley, E.; Honermeier, B.; Don, A.; Gocke, M. I.; Amelung, W.; Kogel-Knabner, I.

    2016-12-01

    We investigated the effects of pre-crops with and without biological nitrogen fixation capacity (fava beans, clover mulch, fodder maize) and fertilization (no fertilizer, NPK fertilizer, PK fertilizer) on soil physico-chemical properties (bulk density, electrical conductivity, soil organic carbon (SOC) concentration and stocks, N concentration and stocks) and their depth distribution (down to 1 m) at a long-term field experiment set up in 1982 in Gießen, Germany. Fertilization had significant but small impacts on the soil chemical environment, most particularly the salt content of the soil, with PK fertilization increasing electrical conductivity throughout the soil profile. Similarly, fertilization resulted in a small reduction of soil pH throughout the entire soil profile. The soil was physically and chemically affected by the type of pre-crop. Plots with fava beans and maize had lower bulk densities in the subsoil than those with clover. Pre-crop type also significantly affected the depth distribution of both N and SOC. Specifically, clover pre-cropping led to an enrichment of N at the surface compared with fava beans and maize. SOC enrichment at the surface was also observed under clover, with the effect most pronounced under PK fertilization. Combined with the bulk density effects, this shift in N distribution resulted in significantly higher N stocks under clover than under fava beans. However, the total stocks of SOC were not affected by pre-crop or fertilizer regime. Our results indicate that humans influence C and N cycling and distribution in soils through the selection of pre-crops and that the influence of crop type is greater than that of fertilization regimes. Pre-cropping with clover, which is used as a mulch, leads to N enrichment in the topsoil, reducing the need for N fertilizer for the subsequent cereal crop. In contrast, the use of fava beans as a pre-crop does not lead to N enrichment. We believe this is due to the greater rooting depth of

  4. Vilified and Fixed

    DEFF Research Database (Denmark)

    Jensen, Thessa; Westberg, Lysa

    , and imbalances of power between scholars and journalists on one side, and fans on the other are not rare occurrences. An analysis of a number of recent news articles, scholarly works, and websites, shows how the attempt of fixing fandom still prevails. Like Said's view on how the Orient is treated, fandom...... and tween website", 'Teen' managed to outrage fans. It took days and hundreds of comments, tweets, and mails to the publishers, before the article was taken down. Vilification in scholarly works and the media may have significantly lessened in recent years. Still, misunderstandings, applied exoticism...... is similarly exotisised, incorporated, and fixed. Scholars explain how to become better fans, attempting authority over fandom by applying rules to a culture, which already has their own. This, the notion of the 'better fan', devalues the existing discourses, rules, and traditions within fandom. The expert...

  5. Including the effects of filamentous bulking sludge during the simulation of wastewater treatment plants using a risk assessment model

    DEFF Research Database (Denmark)

    Flores Alsina, Xavier; Comas, J.; Rodriquez-Roda, I.

    2009-01-01

    The main objective of this paper is to demonstrate how including the occurrence of filamentous bulking sludge in a secondary clarifier model will affect the predicted process performance during the simulation of WWTPs. The IWA Benchmark Simulation Model No. 2 (BSM2) is hereby used as a simulation...... are automatically changed during the simulation by modifying the settling model parameters to mimic the effect of growth of filamentous bacteria. The simulation results demonstrate that including effects of filamentous bulking in the secondary clarifier model results in a more realistic plant performance...

  6. Effect of systemic herbicides on N2-fixing and phosphate solubilizing microorganisms in relation to availability of nitrogen and phosphorus in paddy soils of West Bengal.

    Science.gov (United States)

    Das, Amal Chandra; Debnath, Anjan

    2006-11-01

    A field experiment has been conducted with four systemic herbicides viz., butachlor [N-(butoxymethyl)-2-chloro-2',6'-diethyl-acetanilide], fluchloralin [N-(2-chloroethyl)-(2,6-dinitro-N-propyl-4-trifluoromethyl) aniline], oxadiazon [5-terbutyl-3-(2,4-dichloro-5-isopro poxyphenyl)-1,3,4-oxadiazol-2-one] and oxyfluorfen [2-chloro-1-(3-ethoxy-4-nitrophenyl)-4-(trifluoromethyl) benzene] at their recommended field rates (2.0, 1.5, 0.4 and 0.12kga.i.ha(-1), respectively) to investigate their effects on growth and activities of aerobic non-symbiotic N(2)-fixing bacteria and phosphate solubilizing microorganisms in relation to availability of nitrogen and phosphorus in the rhizosphere soils as well as yield of the rice crop (Oryza sativa L cv. IR-36). Application of herbicides, in general, highly stimulated the population and activities of the target microorganisms, which resulted in a greater amount of atmospheric nitrogen fixation and phosphate solubilization in the rhizosphere soils of the test crop. The greater microbial activities subsequently augmented the mineralization and availability of nitrogen and phosphorus in the soil solution, which in turn increased the yield of the crop. Among the herbicides, oxyfluorfen was most stimulative followed by fluchloralin and oxadiazon in augmenting the microbial activities in soil. Butachlor also accentuated the mineralization and availability of nitrogen due to higher incitement of non-symbiotic N(2)-fixing bacteria in paddy soil. The grain and straw yields of the crop were also significantly increased due to the application of oxyfluorfen (20.2% and 21%) followed by fluchloralin (13.1% and 15.4%) and butachlor (9.1% and 10.2%), respectively.

  7. Effect of nitrogen on cellular production and release of the neurotoxin anatoxin-a in a nitrogen-fixing cyanobacterium

    Directory of Open Access Journals (Sweden)

    Alexis eGagnon

    2012-06-01

    Full Text Available Anatoxin-a (ANTX is a neurotoxin produced by several freshwater cyanobacteria and implicated in lethal poisonings of domesticated animals and wildlife. The factors leading to its production in nature and in culture are not well understood. Resource availability may influence its cellular production as suggested by the carbon-nutrient hypothesis, which links the amount of secondary metabolites produced by plants or microbes to the relative abundance of nutrients. We tested the effects of nitrogen supply on ANTX production and release in a toxic strain of the cyanobacterium Aphanizomenon issatschenkoi (Nostocales. We hypothesized that nitrogen deficiency might constrain the production of ANTX. However, the total concentration and more significantly the cellular content of anatoxin-a peaked (max. 146 µg/L and 1683 µg•g-1 dry weight at intermediate levels of nitrogen supply when N-deficiency was evident based on phycocyanin to chlorophyll a and carbon to nitrogen ratios. The results suggest that the cellular production of anatoxin-a may be stimulated by moderate nutrient stress as described recently for another cyanotoxin (microcystin.

  8. Effect of Taper on Stress Distribution of All Ceramic Fixed Partial Dentures: a 3D-FEA Study

    Directory of Open Access Journals (Sweden)

    F. Gerami-Panah

    2005-09-01

    Full Text Available Statement of Problem: Mechanical failure of ceramic materials is controlled by brittle fracture, mostly occurred in tension. In 3-unit all-ceramic FPDs the connector area is considered to be at fracture risk because of tensile stress concentrations.Purpose: The aim of this FE analysis was to evaluate the effect of taper on stress distribution in all-ceramic FPDs.Materials and Methods: In this experimental study two 3-D finite element models of thee-unit IPS-Empress 2 FPDs replacing mandible second premolar were created by means of finite element software. The digital images were obtained from CT scan of human skull. Abutment was reduced with 12 and 22 degrees of taper. The cement layer,PDL, cancellous bone and cortical bone were also modeled. Frameworks of core material were fabricated. A static load of 100 N was applied at mid pontic area.Resolved stresses were calculated according to the Von Mises criterion and principal stresses.Results: In both models stresses were concentrated at the connectors. The maximum stresses were lower in the model with larger taper. The maximum Von Mises stress was recorded at the connector region of the premolar and the pontic. In model with larger taper the patterns of stresses were also more distributed and less concentrated.Conclusion: The highest Von Mises and principal stress were recorded at the connectors. Tensile stresses developed at the gingival connector of premolar and pontic was higher than molar. The stress level in model with 22-degree taper was lower compare to 12-degree and the stress pattern was more distributed, lowered the risk ofconcentrations.

  9. Eddy Effects in the General Circulation, Spanning Mean Currents, Mesoscale Eddies, and Topographic Generation, Including Submesoscale Nests

    Science.gov (United States)

    2014-09-30

    alongshore winds favoring upwelling circulation. As for the other EBUS (e.g., Humboldt, Benguela, and Canary Currents ), equatorward winds drive...Eddy Effects in the General Circulation, Spanning Mean Currents , Mesoscale Eddies, and Topographic Generation, Including Submesoscale Nests...environments OBJECTIVES The central scientific questions are how the eddies control the persistent currents by their eddy-induced momentum and buoyancy fluxes

  10. Effects of Leisure Education Programme Including Sportive Activities on Perceived Freedom in Leisure of Adolescents with Intellectual Disabilities

    Science.gov (United States)

    Ertuzun, Ezgi

    2015-01-01

    The objective of this experimental study is to determine the effect of leisure education programme including sportive activities on the perceived freedom in leisure of adolescents with mild intellectual disabilities. The research was designed with an experimental group (n = 37) and a control group (n = 34), and was conducted among a total of 71…

  11. Analysis of the effect of the Electron-Beam welding sequence for a fixed manufacturing route using finite element simulations applied to ITER vacuum vessel manufacture

    Energy Technology Data Exchange (ETDEWEB)

    Martín-Menéndez, Cristina, E-mail: cristina@natec-ingenieros.com [Numerical Analysis Technologies, S.L. Marqués de San Esteban No. 52, 33206 Gijón (Spain); Rodríguez, Eduardo [Department of Mechanical Engineering, University of Oviedo, Campus de Gijón, 33203 Gijón (Spain); Ottolini, Marco [Ansaldo Nucleare S.p.A., Corso Perrone 25, 16152 Genova (Italy); Caixas, Joan [F4E, c/Josep Pla, n.2, Torres Diagonal Litoral, Edificio B3, E-08019 Barcelona (Spain); Guirao, Julio [Numerical Analysis Technologies, S.L. Marqués de San Esteban No. 52, 33206 Gijón (Spain)

    2016-03-15

    Highlights: • The simulation methodology employed in this paper is able to adapt inside a complex manufacturing route. • The effect of the sequence is lower in a highly constrained assembly than in a lowly constrained one. • The most relevant influence on the distortions is the jigs design, instead of the welding sequence. • The welding distortion analysis should be used as a guidance to design and improve the manufacturing strategy. - Abstract: The ITER Vacuum Vessel Sectors have very tight tolerances and high density of welding. Therefore, prediction and reduction of welding distortion are critical to allow the final assembly with the other Vacuum Vessel Sectors without the production of a full scale prototype. In this paper, the effect of the welding sequence in the distortions inside a fixed manufacturing route and in a highly constrained assembly is studied in the poloidal segment named inboard (PS1). This is one of the four poloidal segments (PS) assembled for the sector. Moreover, some restrictions and limitations in the welding sequence related to the manufacturing process are explained. The results obtained show that the effect of the sequence is lower in a highly constrained assembly than in a low constrained one. A prototype manufactured by AMW consortium (PS1 mock-up) is used in order to validate the finite element method welding simulation employed. The obtained results confirmed that for Electron-Beam welds, both the welding simulation and the mock-up show a low value of distortions.

  12. Antagonism at combined effects of chemical fertilizers and carbamate insecticides on the rice-field N2-fixing cyanobacterium Cylindrospermum sp. in vitro

    Directory of Open Access Journals (Sweden)

    Padhy Rabindra N.

    2014-03-01

    Full Text Available Effects of chemical fertilizers (urea, super phosphate and potash on toxicities of two carbamate insecticides, carbaryl and carbofuran, individually to the N2-fixing cyanobacterium, Cylindrospermum sp. were studied in vitro at partially lethal levels (below highest permissive concentrations of each insecticide. The average number of vegetative cells between two polar heterocysts was 16.3 in control cultures, while the mean value of filament length increased in the presence of chemical fertilizers, individually. Urea at the 10 ppm level was growth stimulatory and at the 50 ppm level it was growth inhibitory in control cultures, while at 100 ppm it was antagonistic, i.e. toxicity-enhancing along with carbaryl, individually to the cyanobacterium, antagonism was recorded. Urea at 50 ppm had toxicity reducing effect with carbaryl or carbofuran. At 100 and 250 ppm carbofuran levels, 50 ppm urea only had a progressive growth enhancing effect, which was marked well at 250 ppm carbofuran level, a situation of synergism. Super phosphate at the 10 ppm level only was growth promoting in control cultures, but it was antagonistic at its higher levels (50 and 100 ppm along with both insecticides, individually. Potash (100, 200, 300 and 400 ppm reduced toxicity due to carbaryl 20 and carbofuran 250 ppm levels, but potash was antagonistic at the other insecticide levels. The data clearly showed that the chemical fertilizers used were antagonistic with both the insecticides during toxicity to Cylindrospermum sp.

  13. Antagonism at combined effects of chemical fertilizers and carbamate insecticides on the rice-field N2-fixing cyanobacterium Cylindrospermum sp. in vitro

    Science.gov (United States)

    Nayak, Nabakishore; Rath, Shakti

    2014-01-01

    Effects of chemical fertilizers (urea, super phosphate and potash) on toxicities of two carbamate insecticides, carbaryl and carbofuran, individually to the N2-fixing cyanobacterium, Cylindrospermum sp. were studied in vitro at partially lethal levels (below highest permissive concentrations) of each insecticide. The average number of vegetative cells between two polar heterocysts was 16.3 in control cultures, while the mean value of filament length increased in the presence of chemical fertilizers, individually. Urea at the 10 ppm level was growth stimulatory and at the 50 ppm level it was growth inhibitory in control cultures, while at 100 ppm it was antagonistic, i.e. toxicity-enhancing along with carbaryl, individually to the cyanobacterium, antagonism was recorded. Urea at 50 ppm had toxicity reducing effect with carbaryl or carbofuran. At 100 and 250 ppm carbofuran levels, 50 ppm urea only had a progressive growth enhancing effect, which was marked well at 250 ppm carbofuran level, a situation of synergism. Super phosphate at the 10 ppm level only was growth promoting in control cultures, but it was antagonistic at its higher levels (50 and 100 ppm) along with both insecticides, individually. Potash (100, 200, 300 and 400 ppm) reduced toxicity due to carbaryl 20 and carbofuran 250 ppm levels, but potash was antagonistic at the other insecticide levels. The data clearly showed that the chemical fertilizers used were antagonistic with both the insecticides during toxicity to Cylindrospermum sp. PMID:26038669

  14. Synergetic effect of sewage sludge and biomass co-pyrolysis: A combined study in thermogravimetric analyzer and a fixed bed reactor

    International Nuclear Information System (INIS)

    Wang, Xuebin; Deng, Shuanghui; Tan, Houzhang; Adeosun, Adewale; Vujanović, Milan; Yang, Fuxin; Duić, Neven

    2016-01-01

    Highlights: • The synergetic effect of sewage sludge and wheat straw co-pyrolysis was studied. • The mass balance measurement of gas, tar, and char was performed. • The synergetic effect shows strongest under a certain biomass addition ratio around 60%. • The required heat of co-pyrolysis is significantly reduced. - Abstract: Much attention has been given to the valuable products from the pyrolysis of sewage sludge. In this study, the pyrolysis of sewage sludge, biomass (wheat straw) and their mixtures in different proportions were carried out in a thermogravimetric analyzer (TGA) and fixed-bed reactor. The effects of pyrolysis temperature and percentage of wheat straw in wheat straw–sewage sludge mixtures on product distributions in terms of gas, liquid and char and the gas composition were investigated. Results indicate that there is a significantly synergetic effect during the co-pyrolysis processes of sewage sludge and wheat straw, accelerating the pyrolysis reactions. The synergetic effect resulted in an increase in gas and liquid yields but a decrease in char yield. The gas composition and the synergetic effect degree are strongly affected by the wheat straw proportions, and the strongest synergetic effect of sewage sludge and wheat straw co-pyrolysis appears at the biomass proportion of 60 wt.%. With an increase of temperature, the gas yield from the pyrolysis of sewage sludge increased but the liquid and char yields decreased. Moreover, the required heat of co-pyrolysis is significantly reduced compared with the pyrolysis of sewage sludge and wheat straw pyrolysis alone, because of the exothermic reactions between the ash components in two fuel samples.

  15. A computer software system for the generation of global ocean tides including self-gravitation and crustal loading effects

    Science.gov (United States)

    Estes, R. H.

    1977-01-01

    A computer software system is described which computes global numerical solutions of the integro-differential Laplace tidal equations, including dissipation terms and ocean loading and self-gravitation effects, for arbitrary diurnal and semidiurnal tidal constituents. The integration algorithm features a successive approximation scheme for the integro-differential system, with time stepping forward differences in the time variable and central differences in spatial variables. Solutions for M2, S2, N2, K2, K1, O1, P1 tidal constituents neglecting the effects of ocean loading and self-gravitation and a converged M2, solution including ocean loading and self-gravitation effects are presented in the form of cotidal and corange maps.

  16. Effect of social media in improving knowledge among patients having fixed appliance orthodontic treatment: A single-center randomized controlled trial.

    Science.gov (United States)

    Al-Silwadi, Fadi M; Gill, Daljit S; Petrie, Aviva; Cunningham, Susan J

    2015-08-01

    Research has shown that orthodontic patients are more likely to retain information presented in an audiovisual format. However, there has been little research on the effectiveness of audiovisual information provided through different routes such as the Internet. This parallel-group randomized controlled trial assessed whether provision of audiovisual information on the YouTube (Google, San Bruno, Calif) Web site to orthodontic patients undergoing fixed appliance treatment results in improved patient knowledge when compared with conventional methods of information provision. The effects of sex and ethnicity were also investigated. Participants were recruited from the Department of Orthodontics of the Eastman Dental Hospital, University College London Hospitals NHS Foundation Trust, United Kingdom. The patients were 13 years of age and over, with no history of orthodontic treatment, and patient and parental (where appropriate) consent were obtained. The participants were randomized into control (n = 34) and intervention (n = 33) groups using a random number table; there was stratification based on age group, with permuted blocks of 10 patients. Both groups were given routine verbal and written patient information related to fixed appliances, and the participants in the intervention group were sent 3 e-mails over 6 weeks requesting that they view a 6-minute YouTube video containing similar information but in audiovisual format. Patient knowledge was measured using identical questionnaires answered on the day of recruitment (baseline) and again 6 to 8 weeks later. The researchers were unaware of group allocations when enrolling patients and scoring questionnaires. Sixty participants (89.55%) completed the study. Those who completed the trial in the intervention group (n = 30) demonstrated significantly greater improvements in knowledge than did those in the control group (n = 30), scoring, on average, almost 1 point more (95% CI for the difference, 0.305-1.602; P = 0

  17. Effect of bacterial lipase on anaerobic co-digestion of slaughterhouse wastewater and grease in batch condition and continuous fixed-bed reactor.

    Science.gov (United States)

    Affes, Maha; Aloui, Fathi; Hadrich, Fatma; Loukil, Slim; Sayadi, Sami

    2017-10-10

    This study aimed to investigate the effects of bacterial lipase on biogas production of anaerobic co-digestion of slaughterhouse wastewater (SHWW) and hydrolyzed grease (HG). A neutrophilic Staphylococcus xylosus strain exhibiting lipolytic activity was used to perform microbial hydrolysis pretreatment of poultry slaughterhouse lipid rich waste. Optimum proportion of hydrolyzed grease was evaluated by determining biochemical methane potential. A high biogas production was observed in batch containing a mixture of slaughterhouse composed of 75% SHWW and 25% hydrolyzed grease leading to a biogas yield of 0.6 L/g COD introduced. Fixed bed reactor (FBR) results confirmed that the proportion of 25% of hydrolyzed grease gives the optimum condition for the digester performance. Biogas production was significantly high until an organic loading rate (OLR) of 2 g COD/L. d. This study indicates that the use of biological pre-treatment and FBR for the co-digestion of SHWW and hydrolyzed grease is feasible and effective.

  18. Sustained Effectiveness of a Fixed-Dose Combination of Artesunate and Amodiaquine in 480 Patients with Uncomplicated Plasmodium falciparum Malaria in Côte d’Ivoire

    Directory of Open Access Journals (Sweden)

    Serge Brice Assi

    2017-01-01

    Full Text Available The objective of this study was to monitor the effectiveness of artesunate-amodiaquine fixed-dose combination tablets (ASAQ Winthrop® in the treatment of uncomplicated Plasmodium falciparum malaria in Côte d’Ivoire. Two enrolment periods (November 2009 to May 2010 and March to October 2013 were compared using an identical design. Subjects with proven monospecific P. falciparum infection according to the WHO diagnostic criteria were eligible. 290 patients during each period received a dose of ASAQ Winthrop tablets appropriate for their age. The primary outcome measure was PCR-corrected adequate clinical and parasitological response at Day 28 in the per protocol population (255 in Period 1 and 240 in Period 2. This was achieved by 95.7% of patients during Period 1 and 96.3% during Period 2. Over 95% of patients were afebrile at Day 3 and complete parasite clearance was achieved at Day 3 in >99% of patients. Nineteen adverse events in nineteen patients were considered as possibly related to treatment, principally vomiting, abnormal liver function tests, and pruritus. There was no evidence for loss of effectiveness over the three-year period in spite of strong drug pressure. This trial was registered in the US Clinical Trials Registry (clinical.trials.gov under the identifier number NCT01023399.

  19. Social class, employment status and inequality in psychological well-being in the UK: Cross-sectional and fixed effects analyses over two decades.

    Science.gov (United States)

    Richards, Lindsay; Paskov, Marii

    2016-10-01

    A body of academic research has shown a social class gradient in psychological well-being. Some recent work has also suggested that the gradient is worsening over time, though the evidence is mixed. We focus on two straightforward research questions: Is there a class gradient in mental health? Has this gradient changed over time? We answer these questions with attention to two specific causal pathways: employment status and unobserved heterogeneity. We use two data sources: repeated cross-sections from the Health Survey of England (HSE) and longitudinal data from the British Household Panel Survey (BHPS). The combination of pooled OLS regression (with HSE) and fixed effects analysis (with BHPS) allows for a robust analysis of the relationship between class and psychological well-being. We argue that employment status is a confounder in the analysis of class inequalities and show that, along with unobserved heterogeneity, these two pathways go a long way to explain the class gradient. The effects of employment status are substantive and, unlike social class, cannot be explained away by unobserved heterogeneity. We conclude that employment status deserves greater prominence in the debate as both a pathway by which the class gradient transpires, and as another 'dimension' of inequality in its own right. Our overtime analysis suggests that skilled and unskilled manual workers had higher psychological well-being in the 1990s but by 2008 were closer to the average. Class inequalities do not appear to be widening. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Effects of fixed orthodontic treatment and two new mouth rinses on gingival health: A prospective cohort followed by a single-blind placebo-controlled randomized clinical trial.

    Science.gov (United States)

    Sobouti, Farhad; Rakhshan, Vahid; Heydari, Mohaddeseh; Keikavusi, Shohreh; Dadgar, Sepideh; Shariati, Mahsa

    2018-03-01

    Routine brushing protocols might not suffice to reduce the increased plaque accumulation in orthodontic patients. Antimicrobial mouth rinses are favorable in this regard. This two-phase study evaluated the effects of orthodontic treatment and the application of two mouthwashes not studied before on oral health indices. In this two-phase study (a prospective cohort followed by a parallel randomized controlled trial), plaque index (PI), gingival index (GI), gingival bleeding index (GBI), and pocket probing depth (PPD) were measured in 54 orthodontic patients before orthodontic treatment and 4 months later. Then patients were randomized into three groups of mouthrinses: Persica (herbal), Ortho-Kin (containing diluted chlorhexidine), and Placebo (n=18×3). The effects of orthodontic treatment and mouthrinses were analyzed statistically (α=0.05). All the 4 indices increased between the baseline and 4th month of treatment (P values<0.01, paired t-test). They decreased back to baseline levels or below them, after one month of mouthwash application (P values<0.002). Both mouthwashes showed therapeutic effects compared to placebo in terms of PI and GBI. In the case of GI, only Persica showed significantly better results compared to placebo. Regarding PPD, only Ortho-Kin acted better than placebo (P values≤0.05, Tukey). Lack of positive control (regular chlorhexidine mouth rinse) and negative control (a group with no mouthwashes, even without the placebo). Lack of sample size predetermination based on a priori power calculations. The difference between the regime of Persica with that of Ortho-Kin and placebo (which had similar application protocols) disallowed perfectly effective blinding of the patients (hence, single-blind). Fixed orthodontic treatment might disrupt gingival health. Antimicrobial mouthwashes might reverse this. Both evaluated mouthwashes might have therapeutic effects. Copyright © 2018 CEO. Published by Elsevier Masson SAS. All rights reserved.

  1. Adhesives for fixed orthodontic brackets.

    Science.gov (United States)

    Mandall, N A; Millett, D T; Mattick, C R; Hickman, J; Macfarlane, T V; Worthington, H V

    2003-01-01

    Bonding of orthodontic brackets to teeth is important to enable effective and efficient treatment with fixed appliances. The problem is bracket failure during treatment which increases operator chairside time and lengthens treatment time. A prolonged treatment is likely to increase the oral health risks of orthodontic treatment with fixed appliances one of which is irreversible enamel decalcification. To evaluate the effectiveness of different orthodontic adhesives for bonding. Electronic databases: the Cochrane Oral Health Group's Trials Register, the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE and EMBASE. Date of most recent searches: August 2002 (CENTRAL) (The Cochrane Library Issue 2, 2002). Trials were selected if they met the following criteria: randomised controlled trials (RCTs) and controlled clinical trials (CCTs) comparing two different adhesive groups. Participants were patients with fixed orthodontic appliances. The interventions were adhesives that bonded stainless steel brackets to all teeth except the molars. The primary outcome was debond or bracket failure. Data were recorded on decalcification as a secondary outcome, if present. Information regarding methods, participants, interventions, outcome measures and results were extracted in duplicate by pairs of reviewers (Nicky Mandall (NM) and Rye Mattick (CRM); Declan Millett (DTM) and Joy Hickman (JH2)). Since the data were not presented in a form that was amenable to meta-analysis, the results of the review are presented in narrative form only. Three trials satisfied the inclusion criteria. A chemical cured composite was compared with a light cure composite (one trial), a conventional glass ionomer cement (one trial) and a polyacid-modified resin composite (compomer) (one trial). The quality of the trial reports was generally poor. It is difficult to draw any conclusions from this review, however, suggestions are made for methods of improving future research involving

  2. Effects of fixed orthodontic treatment on nickel and chromium levels in gingival crevicular fluid as a novel systemic biomarker of trace elements: A longitudinal study.

    Science.gov (United States)

    Amini, Fariborz; Shariati, Mahsa; Sobouti, Farhad; Rakhshan, Vahid

    2016-05-01

    Nickel and chromium might induce hypersensitivity. Therefore, they are of interest to orthodontists. Gingival crevicular fluid (GCF) is highly relevant to orthodontic treatments and might reflect systemic changes associated with the inflammatory response induced by orthodontic forces. Therefore, it might also be used to show metal ion changes. Nevertheless, baseline metal levels of GCF are unknown, and the effect of orthodontic treatment on GCF metal levels has not been investigated. The aim of this study was to assess the levels of nickel and chromium in GCF. Based on a pilot study, the sample size was predetermined as 24 × 3 measurements to obtain test powers above 90%. Nickel and chromium concentrations were measured before treatment and 1 month and 6 months later in 12 female and 12 male patients who had fixed orthodontic appliances using atomic absorption spectrophotometry. The gingival index was also evaluated in each session. The effects of treatment on GCF ions were analyzed using repeated-measures analysis of variance and Friedman tests (α = 0.05, β ≤0.01). The gingival index worsened over time (chi-square test, P <0.001). The mean nickel levels were 3.894 ± 1.442, 5.913 ± 2.735, and 19.810 ± 8.452 μg per gram, respectively, at baseline, month 1, and month 6. Chromium concentrations were 1.978 ± 0.721, 4.135 ± 1.591, and 13.760 ± 3.555 μg per gram, respectively. Compared with the baseline, nickel increased by 150% and 510%, respectively, in the first and sixth months (Friedman, P <0.0001), and chromium increased by 200% and 700%, respectively (analysis of variance, P <0.0001). Six months of fixed orthodontic treatment might intensify the levels of nickel and chromium in the GCF as well as gingival inflammation. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  3. Nonlocal continuum-based modeling of breathing mode of nanowires including surface stress and surface inertia effects

    Science.gov (United States)

    Ghavanloo, Esmaeal; Fazelzadeh, S. Ahmad; Rafii-Tabar, Hashem

    2014-05-01

    Nonlocal and surface effects significantly influence the mechanical response of nanomaterials and nanostructures. In this work, the breathing mode of a circular nanowire is studied on the basis of the nonlocal continuum model. Both the surface elastic properties and surface inertia effect are included. Nanowires can be modeled as long cylindrical solid objects. The classical model is reformulated using the nonlocal differential constitutive relations of Eringen and Gurtin-Murdoch surface continuum elasticity formalism. A new frequency equation for the breathing mode of nanowires, including small scale effect, surface stress and surface inertia is presented by employing the Bessel functions. Numerical results are computed, and are compared to confirm the validity and accuracy of the proposed method. Furthermore, the model is used to elucidate the effect of nonlocal parameter, the surface stress, the surface inertia and the nanowire orientation on the breathing mode of several types of nanowires with size ranging from 0.5 to 4 nm. Our results reveal that the combined surface and small scale effects are significant for nanowires with diameter smaller than 4 nm.

  4. Nonlocal continuum-based modeling of breathing mode of nanowires including surface stress and surface inertia effects

    International Nuclear Information System (INIS)

    Ghavanloo, Esmaeal; Fazelzadeh, S. Ahmad; Rafii-Tabar, Hashem

    2014-01-01

    Nonlocal and surface effects significantly influence the mechanical response of nanomaterials and nanostructures. In this work, the breathing mode of a circular nanowire is studied on the basis of the nonlocal continuum model. Both the surface elastic properties and surface inertia effect are included. Nanowires can be modeled as long cylindrical solid objects. The classical model is reformulated using the nonlocal differential constitutive relations of Eringen and Gurtin–Murdoch surface continuum elasticity formalism. A new frequency equation for the breathing mode of nanowires, including small scale effect, surface stress and surface inertia is presented by employing the Bessel functions. Numerical results are computed, and are compared to confirm the validity and accuracy of the proposed method. Furthermore, the model is used to elucidate the effect of nonlocal parameter, the surface stress, the surface inertia and the nanowire orientation on the breathing mode of several types of nanowires with size ranging from 0.5 to 4 nm. Our results reveal that the combined surface and small scale effects are significant for nanowires with diameter smaller than 4 nm.

  5. Nonlocal continuum-based modeling of breathing mode of nanowires including surface stress and surface inertia effects

    Energy Technology Data Exchange (ETDEWEB)

    Ghavanloo, Esmaeal, E-mail: ghavanloo@shirazu.ac.ir [School of Mechanical Engineering, Shiraz University, Shiraz 71963-16548 (Iran, Islamic Republic of); Fazelzadeh, S. Ahmad [School of Mechanical Engineering, Shiraz University, Shiraz 71963-16548 (Iran, Islamic Republic of); Rafii-Tabar, Hashem [Department of Medical Physics and Biomedical Engineering, Research Center for Medical Nanotechnology and Tissue Engineering, Shahid Beheshti University of Medical Sciences, Evin, Tehran (Iran, Islamic Republic of); Computational Physical Sciences Research Laboratory, School of Nano-Science, Institute for Research in Fundamental Sciences (IPM), Tehran (Iran, Islamic Republic of)

    2014-05-01

    Nonlocal and surface effects significantly influence the mechanical response of nanomaterials and nanostructures. In this work, the breathing mode of a circular nanowire is studied on the basis of the nonlocal continuum model. Both the surface elastic properties and surface inertia effect are included. Nanowires can be modeled as long cylindrical solid objects. The classical model is reformulated using the nonlocal differential constitutive relations of Eringen and Gurtin–Murdoch surface continuum elasticity formalism. A new frequency equation for the breathing mode of nanowires, including small scale effect, surface stress and surface inertia is presented by employing the Bessel functions. Numerical results are computed, and are compared to confirm the validity and accuracy of the proposed method. Furthermore, the model is used to elucidate the effect of nonlocal parameter, the surface stress, the surface inertia and the nanowire orientation on the breathing mode of several types of nanowires with size ranging from 0.5 to 4 nm. Our results reveal that the combined surface and small scale effects are significant for nanowires with diameter smaller than 4 nm.

  6. Methodology for performing surveys for fixed contamination

    International Nuclear Information System (INIS)

    Durham, J.S.; Gardner, D.L.

    1994-10-01

    This report describes a methodology for performing instrument surveys for fixed contamination that can be used to support the release of material from radiological areas, including release to controlled areas and release from radiological control. The methodology, which is based on a fast scan survey and a series of statistical, fixed measurements, meets the requirements of the U.S. Department of Energy Radiological Control Manual (RadCon Manual) (DOE 1994) and DOE Order 5400.5 (DOE 1990) for surveys for fixed contamination and requires less time than a conventional scan survey. The confidence interval associated with the new methodology conforms to the draft national standard for surveys. The methodology that is presented applies only to surveys for fixed contamination. Surveys for removable contamination are not discussed, and the new methodology does not affect surveys for removable contamination

  7. Fixed-film processes. Part 1

    International Nuclear Information System (INIS)

    Canziani, R.

    1999-01-01

    Recently, full scale fixed-film or mixed suspended and fixed biomass bioreactors have been applied in many wastewater treatments plants. These process no longer depend on biomass settle ability and can be used to improve the performance of existing plants as required by more stringent discharge permit limits, especially for nutrients and suspended solid. Also, processes may work at high rates making it possible to build small footprint installations. Fixed-film process include trickling filter, moving bed reactors fluidized bed reactors. In the first part, the theoretical base governing fixed-film processes are briefly outlined with some simple examples of calculations underlining the main differences with conventional activated sludge processes [it

  8. Fixed-film processes. Part 2

    International Nuclear Information System (INIS)

    Canziani, R.

    1999-01-01

    Recently, full scale fixed-film or mixed suspended have been applied in many wastewater treatments plants. These processes no longer depend on biomass settle ability and can be used to improve the performance of existing plants as required by more stringent discharge permit limits, especially for nutrients suspended solids. Also, processes may work at high rates making is possible to build small footprint installations. Fixed-film processes include trickling filters (and combined suspended and fixed-films processes), rotating biological contactors, biological aerated submerged, filters moving bed reactors, fluidized bed reactors. In the first part, the theoretical based governing fixed-film processes are briefly outlined, with some simple examples of calculations, underlining the main differences with conventional activate sludge processes. In the second part, the most common types of reactors are reviewed [it

  9. Topological fixed point theory of multivalued mappings

    CERN Document Server

    Górniewicz, Lech

    1999-01-01

    This volume presents a broad introduction to the topological fixed point theory of multivalued (set-valued) mappings, treating both classical concepts as well as modern techniques. A variety of up-to-date results is described within a unified framework. Topics covered include the basic theory of set-valued mappings with both convex and nonconvex values, approximation and homological methods in the fixed point theory together with a thorough discussion of various index theories for mappings with a topologically complex structure of values, applications to many fields of mathematics, mathematical economics and related subjects, and the fixed point approach to the theory of ordinary differential inclusions. The work emphasises the topological aspect of the theory, and gives special attention to the Lefschetz and Nielsen fixed point theory for acyclic valued mappings with diverse compactness assumptions via graph approximation and the homological approach. Audience: This work will be of interest to researchers an...

  10. Fixed target beams

    CERN Document Server

    Kain, V; Cettour-Cave, S; Cornelis, K; Fraser, M A; Gatignon, L; Goddard, B; Velotti, F

    2017-01-01

    The CERN SPS (Super Proton Synchrotron) serves asLHC injector and provides beam for the North Area fixedtarget experiments. At low energy, the vertical acceptancebecomes critical with high intensity large emittance fixed tar-get beams. Optimizing the vertical available aperture is a keyingredient to optimize transmission and reduce activationaround the ring. During the 2016 run a tool was developed toprovide an automated local aperture scan around the entirering.The flux of particles slow extracted with the1/3inte-ger resonance from the Super Proton Synchrotron at CERNshould ideally be constant over the length of the extractionplateau, for optimum use of the beam by the fixed target ex-periments in the North Area. The extracted intensity is con-trolled in feed-forward correction of the horizontal tune viathe main SPS quadrupoles. The Mains power supply noiseat 50 Hz and harmonics is also corrected in feed-forwardby small amplitude tune modulation at the respective fre-quencies with a dedicated additional quad...

  11. The effect of including tensor forces in nucleon-nucleon interaction on three-nucleon binding energy

    International Nuclear Information System (INIS)

    Osman, A.; Ramadan, S.

    1986-01-01

    Separable two-body interactions are used in considering the three-nucleon problem. The nucleon-nucleon potentials are taken to include attraction and repulsion as well as tensor forces. The separable approximation is used in order to investigate the effect of the tensor forces. The separable expansion is introduced in the three-nucleon problem, by which the Faddeev equations are reduced to a well-behaved set of coupled integral equations. Numerical calculations are carried out for the obtained integral equations using potential functions of the Yamaguchi, Gaussian, Takabin, Mongan and Reid forms. The present calculated values of the binding energies of the 3 H and 3 He nuclei are in good agreement with the experimental values. The effect of including the tensor forces in the nucleon-nucleon interactions is found to improve the three-nucleon binding energy by about 4.490% to 8.324%. 37 refs., 2 tabs. (author)

  12. The effect on climate change impacts for building products when including the timing of greenhouse gas emissions

    Science.gov (United States)

    Richard D Bergman

    2012-01-01

    Greenhouse gases (GHGs) trap infrared radiation emitting from the Earth’s surface to generate the “greenhouse effect” thus keeping the planet warm. Many natural activities including rotting vegetation emit GHGs such as carbon dioxide to produce this natural affect. However, in the last 200 years or so, human activity has increased the atmospheric concentrations of GHGs...

  13. What types of social interactions reduce the risk of psychological distress? Fixed effects longitudinal analysis of a cohort of 30,271 middle-to-older aged Australians.

    Science.gov (United States)

    Feng, Xiaoqi; Astell-Burt, Thomas

    2016-11-01

    Research on the impact of social interactions on psychological distress tends to be limited to particular forms of support, cross-sectional designs and by the spectre of omitted variables bias. A baseline sample with 3.4±0.95 years follow-up time was extracted from the 45 and Up Study. Change in the risk of psychological distress (Kessler Psychological Distress Scale) was assessed using fixed effects logistic regressions in relation to the number of times in the past week a participant: i) spent time with friends or family they did not live with; ii) talked to friends, relatives or others on the telephone; iii) attended meetings at social clubs or religious groups; and the count of people outside their home, but within one hour travel-time, participants felt close to. Separate models were fitted for men and women, adjusting for age, income, economic and couple status. An increase in the number of social interactions was associated with a reduction in the risk of psychological distress, with some gender differences. Interactions with friends or family were important for women (adjusted OR 0.85, 95%CI 0.74, 0.98, p=0.024), whereas telephone calls were effective among men (adjusted OR 0.83, 95%CI 0.72, 0.96, p=0.011). Strong effects for the number of people that can be relied on were observed for men and women, but attendance at clubs and groups was not. No age-specific effects were observed. No indicator of positive mental health. Policies targeting greater social interactions in middle-to-older age may help protect mental health. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. PTA-1 computer program for treating pressure transients in hydraulic networks including the effect of pipe plasticity

    International Nuclear Information System (INIS)

    Youngdahl, C.K.; Kot, C.A.

    1977-01-01

    Pressure pulses in the intermediate sodium system of a liquid-metal-cooled fast breeder reactor, such as may originate from a sodium/water reaction in a steam generator, are propagated through the complex sodium piping network to system components such as the pump and intermediate heat exchanger. To assess the effects of such pulses on continued reliable operation of these components and to contribute to system designs which result in the mitigation of these effects, Pressure Transient Analysis (PTA) computer codes are being developed for accurately computing the transmission of pressure pulses through a complicated fluid transport system, consisting of piping, fittings and junctions, and components. PTA-1 provides an extension of the well-accepted and verified fluid hammer formulation for computing hydraulic transients in elastic or rigid piping systems to include plastic deformation effects. The accuracy of the modeling of pipe plasticity effects on transient propagation has been validated using results from two sets of Stanford Research Institute experiments. Validation of PTA-1 using the latter set of experiments is described briefly. The comparisons of PTA-1 computations with experiments show that (1) elastic-plastic deformation of LMFBR-type piping can have a significant qualitative and quantitative effect on pressure pulse propagation, even in simple systems; (2) classical fluid-hammer theory gives erroneous results when applied to situations where piping deforms plastically; and (3) the computational model incorporated in PTA-1 for predicting plastic deformation and its effect on transient propagation is accurate

  15. Detection of Lawsonia intracellularis in formalin-fixed porcine intestinal tissue samples: comparison of immunofluorescence and in-situ hybridization, and evaluation of the effects of controlled autolysis.

    Science.gov (United States)

    Jensen, T K; Boesen, H T; Vigre, H; Boye, M

    2010-01-01

    Two methods, an immunofluorescence assay (IFA; with a Lawsonia intracellularis-specific monoclonal antibody) and fluorescent in-situ hybridization (FISH; with a specific oligonucleotide probe targeting 16S ribosomal RNA of the bacterium), were compared for their ability to detect L. intracellularis (the cause of porcine proliferative enteritis [PE]) in formalin-fixed samples of intestinal tissue. Of 69 intestinal samples with gross lesions of PE, 63 were positive by both FISH and IFA, but six were positive only by IFA. This indicated that the sensitivity of FISH was 91% that of IFA. However, both methods had a specificity of 100%. Fifty normal porcine intestines were negative by both tests. IFA was much less susceptible than FISH to the effects of autolysis. Thus, three of nine samples from pigs with PE were FISH-negative after being kept at 20 degrees C for 4 days, and seven were FISH negative after 2 weeks; after 4 weeks at this temperature, however, six of the nine samples were still IFA positive. After being kept at 4 degrees C for 12 weeks, the majority of samples (> or = 66%) were positive by both methods.

  16. Low and fixed dose of hydroxyurea is effective and safe in patients with HbSβ(+) thalassemia with IVS1-5(G→C) mutation.

    Science.gov (United States)

    Dehury, Snehadhini; Purohit, Prasanta; Patel, Siris; Meher, Satyabrata; Kullu, Bipin Kishore; Sahoo, Lulup Kumar; Patel, Nayan Kumar; Mohapatra, Alok Kumar; Das, Kishalaya; Patel, Dilip Kumar

    2015-06-01

    Despite compelling evidence that hydroxyurea is safe and effective in sickle cell disease, it is prescribed sparingly due to several barriers like knowledge gaps in certain genotypes, apprehension about its safety and toxicity, and limited resources. We undertook this study to find out the efficacy and safety of HU in patients with HbSβ(+) -thalassemia with IVS1-5(G→C) mutation. We registered 318 patients with HbSβ(+) -thalassemia with IVS1-5(G→C) mutation. Of these, 203 were enrolled for hydroxyurea treatment at a low and fixed dose of 10 mg/kg/day. One hundred four patients (Group-I: 37 children and Group-II: 67 adults) with ≥2 years of hydroxyurea treatment were studied. The rate of vaso-occlusive crises, requirement of blood transfusion and rate of hospitalization reduced from 3 to 0.5, 1 to 0 and 1 to 0 in Group-I and 3 to 0, 1 to 0 and 0.5 to 0 in Group-II respectively after HU therapy (P hydroxyurea is suitable for treatment of patients with HbSβ(+) -thalassemia in resource poor setting. © 2014 Wiley Periodicals, Inc.

  17. The effects of extreme rainfall events on carbon release from Biological Soil Crusts covered soil in fixed sand dunes in the Tengger Desert, northern China

    Science.gov (United States)

    Zhao, Yang; Li, Xinrong; Pan, Yanxia; Hui, Rong

    2016-04-01

    How soil cover types and extreme rainfall event influence carbon (C) release in temperate desert ecosystems has largely been unexplored. We assessed the effects of extreme rainfall (quantity and intensity) events on the carbon release from soils covered by different types of biological soil crusts (BSCs) in fixed sand dunes in the Tengger Desert, Shapotou regionof northern China. We removed intact crusts down to 10 cm and measured them in PVC mesocosms. A Li-6400-09 Soil Chamber was used to measure the respiration rates of the BSCs immediately after the rainfall stopped, and continued until the respiration rates of the BSCs returned to the pre-rainfall basal rate. Our results showed that almost immediately after extreme rainfall events the respiration rates of algae crust and mixed crust were significantly inhibited, but moss crust was not significantly affected. The respiration rates of algae crust, mixed crust, and moss crust in extreme rainfall quantity and intensity events were, respectively, 0.12 and 0.41 μmolCO2/(m2•s), 0.10 and 0.45 μmolCO2/(m2•s), 0.83 and 1.69 μmolCO2/(m2•s). Our study indicated that moss crust in the advanced succession stage can well adapt to extreme rainfall events in the short term. Keywords: carbon release; extreme rainfall events; biological soil crust

  18. The effects of fixed-bed drying on the yield and composition of essential oil from long pepper (Piper hispidinervium C. DC leaves

    Directory of Open Access Journals (Sweden)

    N. P. Braga

    2005-06-01

    Full Text Available Piper hispidinervium C.DC (Piperaceae is popularly known as long pepper. It grows in degraded areas of natural fields in the state of Acre, Brazil. Its leaves are 3 to 4 % essential oil rich in safrole, within the range of 90 to 94 %. In the chemical industry, safrole is an important raw material, mainly due to two of its derivatives: heliotropin, which is widely used as a fragrance and flavoring agent, and piperonyl butoxide (PBO, a vital ingredient of pyrethroid insecticides. Natural pyrethrum in particular would not be an economical insecticide without the synergistic effect of PBO; therefore, its industrial future is linked to the continued availability of PBO. As a fragrance, safrole has many applications in household products such as floor waxes, polishes, soaps, detergents and cleaning agents. In this work, leaves were dried in a fixed-bed dryer using different drying-air temperatures (35, 40, 45, 50, 55 and 60 ºC and drying times (900, 2700 and 3600 seconds. Essential oil was extracted by cohobation (meaning that the condensed water that comes out of the flask is recycled from both raw and dried leaves. The essential oil yield and safrole content are susceptible to rapid loss of moisture by Piper hispidinervium C. DC leaves. It was observed that the essential oil yield increased twice after the drying process. However, safrole content decreased about 20 percent when temperature was above 50 ºC and drying times were more than 2700 minutes.

  19. Cost-effectiveness and budget impact of the fixed-dose dual bronchodilator combination tiotropium–olodaterol for patients with COPD in the Netherlands

    Directory of Open Access Journals (Sweden)

    van Boven JF

    2016-09-01

    Full Text Available Job FM van Boven,1,2 Janwillem WH Kocks,2 Maarten J Postma1,3,4 1Department of Pharmacy, Unit of PharmacoEpidemiology & PharmacoEconomics, 2Department of General Practice, Groningen Research Institute for Asthma and COPD (GRIAC, 3Institute of Science in Healthy Aging & healthcaRE (SHARE, 4Department of Epidemiology, University Medical Center Groningen (UMCG, University of Groningen, Groningen, the Netherlands Purpose: The fixed-dose dual bronchodilator combination (FDC of tiotropium and olodaterol showed increased effectiveness regarding lung function and health-related quality of life in patients with chronic obstructive pulmonary disease (COPD compared with the use of its mono-components. Yet, while effectiveness and safety have been shown, the health economic implication of this treatment is still unknown. The aim of this study was to assess the cost–utility and budget impact of tiotropium–olodaterol FDC in patients with moderate to very severe COPD in the Netherlands.Patients and methods: A cost–utility study was performed, using an individual-level Markov model. To populate the model, individual patient-level data (age, height, sex, COPD duration, baseline forced expiratory volume in 1 second were obtained from the tiotropium–olodaterol TOnado trial. In the model, forced expiratory volume in 1 second and patient-level data were extrapolated to utility and survival, and treatment with tiotropium–olodaterol FDC was compared with tiotropium. Cost–utility analysis was performed from the Dutch health care payer’s perspective using a 15-year time horizon in the base-case analysis. The standard Dutch discount rates were applied (costs: 4.0%; effects: 1.5%. Both univariate and probabilistic sensitivity analyses were performed. Budget impact was annually assessed over a 5-year time horizon, taking into account different levels of medication adherence.Results: As a result of cost increases, combined with quality-adjusted life-year (QALY

  20. Effects of different five-day progesterone-based fixed-time AI protocols on follicular/luteal dynamics and fertility in dairy cows

    Science.gov (United States)

    GARCIA-ISPIERTO, Irina; LÓPEZ-GATIUS, Fernando

    2014-01-01

    This study compares in two experiments the responses of lactating dairy cows to four different progesterone-based protocols for fixed-time artificial insemination (FTAI) in terms of their effects on follicular/luteal dynamics and fertility. The protocols consisted of a progesterone intravaginal device fitted for five days, along with the administration of different combinations of gonadotropin releasing hormone, equine chorionic gonadotropin and a single or double dose (24 h apart) of prostaglandin F2α. In Experiment I, the data were derived from 232 lactating cows. Binary logistic regression identified no effects of treatment on ovulation failure or multiple ovulation 10 days post artificial insemination (AI). Based on the odds ratio, the likelihood of ovulation failure was lower (by a factor of 0.1) in cows showing at least one corpus luteum (CL) upon treatment than in cows lacking a CL; repeat breeders (> 3 AI) and cows with multiple CLs at treatment showed lower (by a factor of 0.44) and higher (by a factor of 9.0) risks of multiple ovulation, respectively, than the remaining animals. In Experiment II, the data were derived from 5173 AIs. The independent variable treatment failed to affect the conception rate 28–34 days post AI, twin pregnancy or early fetal loss 58–64 days post AI. The results of this study demonstrate the efficacy of 5-day progesterone-based protocols for FTAI. All four protocols examined were able to induce ovulation in both cyclic and non-cyclic animals so that FTAI returned a similar pregnancy rate to spontaneous estrus. Our results suggest that the ovarian response and fertility resulting from each treatment are due more to the effect of ovarian structures at treatment than to the different combinations of hormones investigated. PMID:25196275

  1. Fixed Access Network Sharing

    Science.gov (United States)

    Cornaglia, Bruno; Young, Gavin; Marchetta, Antonio

    2015-12-01

    Fixed broadband network deployments are moving inexorably to the use of Next Generation Access (NGA) technologies and architectures. These NGA deployments involve building fiber infrastructure increasingly closer to the customer in order to increase the proportion of fiber on the customer's access connection (Fibre-To-The-Home/Building/Door/Cabinet… i.e. FTTx). This increases the speed of services that can be sold and will be increasingly required to meet the demands of new generations of video services as we evolve from HDTV to "Ultra-HD TV" with 4k and 8k lines of video resolution. However, building fiber access networks is a costly endeavor. It requires significant capital in order to cover any significant geographic coverage. Hence many companies are forming partnerships and joint-ventures in order to share the NGA network construction costs. One form of such a partnership involves two companies agreeing to each build to cover a certain geographic area and then "cross-selling" NGA products to each other in order to access customers within their partner's footprint (NGA coverage area). This is tantamount to a bi-lateral wholesale partnership. The concept of Fixed Access Network Sharing (FANS) is to address the possibility of sharing infrastructure with a high degree of flexibility for all network operators involved. By providing greater configuration control over the NGA network infrastructure, the service provider has a greater ability to define the network and hence to define their product capabilities at the active layer. This gives the service provider partners greater product development autonomy plus the ability to differentiate from each other at the active network layer.

  2. Utilization of nitrogen fixing trees

    Energy Technology Data Exchange (ETDEWEB)

    Brewbaker, J.L.; Beldt, R. van den; MacDicken, K.; Budowski, G.; Kass, D.C.L.; Russo, R.O.; Escalante, G.; Herrera, R.; Aranguren, J.; Arkcoll, D.B.; Doebereinger, J. (cord.)

    1983-01-01

    Six papers from the symposium are noted. Brewbaker, J.L., Beldt, R. van den, MacDicken, K. Fuelwood uses and properties of nitrogen-fixing trees, pp 193-204, (Refs. 15). Includes a list of 35 nitrogen-fixing trees of high fuelwood value. Budowski, G.; Kass, D.C.L.; Russo, R.O. Leguminous trees for shade, pp 205-222, (Refs. 68). Escalante, G., Herrera, R., Aranguren, J.; Nitrogen fixation in shade trees (Erythrina poeppigiana) in cocoa plantations in northern Venezuela, pp 223-230, (Refs. 13). Arkcoll, D.B.; Some leguminous trees providing useful fruits in the North of Brazil, pp 235-239, (Refs. 13). This paper deals with Parkia platycephala, Pentaclethra macroloba, Swartzia sp., Cassia leiandra, Hymenaea courbaril, dipteryz odorata, Inga edulis, I. macrophylla, and I. cinnamonea. Baggio, A.J.; Possibilities of the use of Gliricidia sepium in agroforestry systems in Brazil, pp 241-243; (Refs. 15). Seiffert, N.F.; Biological nitrogen and protein production of Leucaena cultivars grown to supplement the nutrition of ruminants, pp 245-249, (Refs. 14). Leucaena leucocephala cv. Peru, L. campina grande (L. leucocephala), and L. cunningham (L. leucocephalae) were promising for use as browse by beef cattle in central Brazil.

  3. Wind-induced response analysis of a wind turbine tower including the blade-tower coupling effect

    Institute of Scientific and Technical Information of China (English)

    Xiao-bo CHEN; Jing LI; Jian-yun CHEN

    2009-01-01

    To analyze wind-induced response characteristics of a wind turbine tower more accurately, the blade-tower coupling effect was investigated. The mean wind velocity of the rotating blades and tower was simulated according to wind shear effects,and the fluctuating wind velocity time series of the wind turbine were simulated by a harmony superposition method. A dynamic finite element method (FEM) was used to calculate the wind-induced response of the blades and tower. Wind-induced responses of the tower were calculated in two cases (one included the blade-tower coupling effect, and the other only added the mass of blades and the hub at the top of the tower), and then the maximal displacements at the top of the tower of the tow cases were compared with each other. As a result of the influence of the blade-tower coupling effect and the total base shear of the blades, the maximal displacement of the first case increased nearly by 300% compared to the second case. To obtain more precise analysis, the blade-tower coupling effect and the total base shear of the blades should be considered simultaneously in the design of wind turbine towers.

  4. Cost-effectiveness and budget impact of the fixed-dose dual bronchodilator combination tiotropium-olodaterol for patients with COPD in the Netherlands.

    Science.gov (United States)

    van Boven, Job Fm; Kocks, Janwillem Wh; Postma, Maarten J

    2016-01-01

    The fixed-dose dual bronchodilator combination (FDC) of tiotropium and olodaterol showed increased effectiveness regarding lung function and health-related quality of life in patients with chronic obstructive pulmonary disease (COPD) compared with the use of its mono-components. Yet, while effectiveness and safety have been shown, the health economic implication of this treatment is still unknown. The aim of this study was to assess the cost-utility and budget impact of tiotropium-olodaterol FDC in patients with moderate to very severe COPD in the Netherlands. A cost-utility study was performed, using an individual-level Markov model. To populate the model, individual patient-level data (age, height, sex, COPD duration, baseline forced expiratory volume in 1 second) were obtained from the tiotropium-olodaterol TOnado trial. In the model, forced expiratory volume in 1 second and patient-level data were extrapolated to utility and survival, and treatment with tiotropium-olodaterol FDC was compared with tiotropium. Cost-utility analysis was performed from the Dutch health care payer's perspective using a 15-year time horizon in the base-case analysis. The standard Dutch discount rates were applied (costs: 4.0%; effects: 1.5%). Both univariate and probabilistic sensitivity analyses were performed. Budget impact was annually assessed over a 5-year time horizon, taking into account different levels of medication adherence. As a result of cost increases, combined with quality-adjusted life-year (QALY) gains, results showed that tiotropium-olodaterol FDC had an incremental cost-effectiveness ratio of €7,004/QALY. Without discounting, the incremental cost-effectiveness ratio was €5,981/QALY. Results were robust in univariate and probabilistic sensitivity analyses. Budget impact was estimated at €4.3 million over 5 years assuming 100% medication adherence. Scenarios with 40%, 60%, and 80% adherence resulted in lower 5-year incremental cost increases of €1.7, €2

  5. Third-order transfer matrices calculated for an electrostatic toroidal sector condenser including fringing-field effects

    CERN Document Server

    Mordik, S N

    2002-01-01

    The third-order transfer matrices are calculated for an electrostatic toroidal sector condenser using a rigorously conserved matrix method that implies the conservation of the beam phase volume at each step in the calculations. The transfer matrices (matrizants) obtained, include the fringing-field effect due to the stray fields. In the case of a rectangular distribution of the field components along the optical axis, the analytical expressions for all aberration coefficients, including the dispersion ones, are derived accurate to the third-order terms. In simulations of real fields with the stray field width other than zero, a smooth distribution of the field components is used for which similar aberration coefficients were calculated by means of the conserved numerical method . It has been found that for a smooth model, as the stray field width tends to zero, the aberration coefficients approach the corresponding aberration values in the rectangular model.

  6. Third-order transfer matrices calculated for an electrostatic toroidal sector condenser including fringing-field effects

    International Nuclear Information System (INIS)

    Mordik, S.N.; Ponomarev, A.G.

    2002-01-01

    The third-order transfer matrices are calculated for an electrostatic toroidal sector condenser using a rigorously conserved matrix method that implies the conservation of the beam phase volume at each step in the calculations. The transfer matrices (matrizants) obtained, include the fringing-field effect due to the stray fields. In the case of a rectangular distribution of the field components along the optical axis, the analytical expressions for all aberration coefficients, including the dispersion ones, are derived accurate to the third-order terms. In simulations of real fields with the stray field width other than zero, a smooth distribution of the field components is used for which similar aberration coefficients were calculated by means of the conserved numerical method . It has been found that for a smooth model, as the stray field width tends to zero, the aberration coefficients approach the corresponding aberration values in the rectangular model

  7. Variationally stable treatment of two- and three-photon detachment of H- including electron-correlation effects

    International Nuclear Information System (INIS)

    Liu, C.; Gao, B.; Starace, A.F.

    1992-01-01

    A variationally stable, adiabatic hyperspherical treatment of two- and three-photon detachment of H - is presented. Results are compared with analytic predictions of a zero-range potential model of H - . Detailed comparisions are made also with other theoretical results which include the effects of electron correlations. We predict analytically (and demonstrate numerically) an extreme sensitivity of the theoretical predictions to any errors in the value of the electron affinity employed. In an Appendix we show that the low-intensity limit of the Keldysh treatment [Sov. Phys. JETP 20, 1307 (1965)] of detachment of an electron bound in a zero-range potential agrees with the results of a perturbative treatment

  8. Effects of Temperature and Residence Time on the Emissions of PIC and Fine Particles during Fixed Bed Combustion of Conifer Stemwood Pellets

    Energy Technology Data Exchange (ETDEWEB)

    Boman, Christoffer; Lindmark, Fredrik; Oehman, Marcus; Nordin, Anders [Umeaa Univ. (Sweden). Energy Technology and Thermal Process Chemistry; Pettersson, Esbjoern [Energy Technology Centre, Piteaa (Sweden); Westerholm, Roger [Stockholm Univ., Arrhenius Laboratory (Sweden). Dept. of Analytical Chemistry

    2006-07-15

    The use of wood fuel Pellets has proved to be well suited for the small-scale market enabling controlled and efficient combustion with low emission of products of incomplete combustion (PIC). Still a potential for further emission reduction exists and a thorough understanding of the influence of combustion conditions on the emission characteristics of air pollutants like PAH and particulate matter (PM) is important. The objective was to determine the effects of temperature and residence time on the emission performance and characteristics with focus on hydrocarbons and PM during combustion of conifer stemwood Pellets in a laboratory fixed bed reactor (<5 kW). Temperature and residence time after the bed section were varied according to statistical experimental designs (650-970 deg C and 0.5-3.5 s) with the emission responses; CO, organic gaseous carbon, NO, 20 VOC compounds, 43 PAH compounds, PM{sub tot}, fine particle mass/count median diameter (MMD and CMD) and number concentration. Temperature was negatively correlated with the emissions of all studied PIC with limited effects of residence time. The PM{sub tot} emissions of 15-20 mg/MJ was in all cases dominated by fine (<1 {mu}m) particles of K, Na, S, Cl, C, O and Zn. Increased residence time resulted in increased fine particle sizes (i.e. MMD and CMD) and decreased number concentrations. The importance of high temperature (>850 deg C) in the bed zone with intensive, air rich and well mixed isothermal conditions for 0.5-1.0 s in the post combustion zone was illustrated for wood Pellets combustion with almost a total depletion of all studied PIC. The results emphasize the need for further verification studies and technology development work.

  9. Effect of Steady-State Faldaprevir on Pharmacokinetics of Atorvastatin or Rosuvastatin in Healthy Volunteers: A Prospective Open-Label, Fixed-Sequence Crossover Study.

    Science.gov (United States)

    Huang, Fenglei; Marzin, Kristell; Koenen, Rüdiger; Kammerer, Klaus Peter; Strelkowa, Natalja; Elgadi, Mabrouk; Quinson, Anne-Marie; Haertter, Sebastian

    2017-10-01

    Faldaprevir (FDV) is a potent, orally administered inhibitor of hepatitis C virus protease. It inhibits multiple cytochrome P-450 enzymes and multiple membrane transporters. The objective of this study was to evaluate the effect of steady-state faldaprevir on the pharmacokinetics (PK) of a single dose of atorvastatin or rosuvastatin. In this single-center, open-label, fixed-sequence crossover study, 33 healthy adult male and female volunteers were given either atorvastatin 10 mg (n = 16) or rosuvastatin 10 mg (n = 17) on day 1. Subjects subsequently received 240 mg twice daily of faldaprevir (loading dose) on day 5, followed by 240 mg faldaprevir once daily from day 6 to day 10, with an additional single dose of atorvastatin (10 mg) or rosuvastatin (10 mg) given on day 10. PK samples for the statins were collected on days 1-3 and days 10-12. Concomitant administration with faldaprevir led to approximately 9-fold and 34-fold increases in AUC 0-∞ and C max , respectively, of atorvastatin and approximately 15-fold and 33-fold increases in AUC 0-∞ and C max , respectively, of rosuvastatin, compared with the statins given alone. Exposure to the major metabolites (ortho-hydroxyatorvastatin and N-desmethylrosuvastatin) was increased to a similar magnitude as that of the parent compounds. The marked drug-drug interaction observed is most likely related to the inhibitory effects of faldaprevir on transporters, particularly hepatic uptake transporters such as OTAP1B1 and OATP1B3. Given the significant increase in exposure to statins in healthy volunteers, coadministration of faldaprevir with statins should be avoided. © 2017, The American College of Clinical Pharmacology.

  10. Unsteady free surface flow in porous media: One-dimensional model equations including vertical effects and seepage face

    Science.gov (United States)

    Di Nucci, Carmine

    2018-05-01

    This note examines the two-dimensional unsteady isothermal free surface flow of an incompressible fluid in a non-deformable, homogeneous, isotropic, and saturated porous medium (with zero recharge and neglecting capillary effects). Coupling a Boussinesq-type model for nonlinear water waves with Darcy's law, the two-dimensional flow problem is solved using one-dimensional model equations including vertical effects and seepage face. In order to take into account the seepage face development, the system equations (given by the continuity and momentum equations) are completed by an integral relation (deduced from the Cauchy theorem). After testing the model against data sets available in the literature, some numerical simulations, concerning the unsteady flow through a rectangular dam (with an impermeable horizontal bottom), are presented and discussed.

  11. Seismic evaluation of a cooling water reservoir facility including fluid-structure and soil-structure interaction effects

    International Nuclear Information System (INIS)

    Kabir, A.F.; Maryak, M.E.

    1991-01-01

    Seismic analyses and structural evaluations were performed for a cooling water reservoir of a nuclear reactor facility. The horizontal input seismic motion was the NRC Reg. guide 1.60 spectrum shape anchored at 0.20g zero period acceleration. Vertical input was taken as two-thirds of the horizontal input. Soil structure interaction and hydrodynamic effects were addressed in the seismic analyses. Uncertainties in the soil properties were accounted for by considering three soil profiles. Two 2-dimensional SSI models and a 3-dimensional static model. Representing different areas of the reservoir structures were developed and analyzed to obtain seismic forces and moments, and accelerations at various locations. The results included in this paper indicated that both hydrodynamic and soil-structure interaction effects are significant contributors to the seismic responses of the water-retaining walls of the reservoir

  12. Adult vaccination strategies for the control of pertussis in the United States: an economic evaluation including the dynamic population effects.

    Directory of Open Access Journals (Sweden)

    Laurent Coudeville

    Full Text Available BACKGROUND: Prior economic evaluations of adult and adolescent vaccination strategies against pertussis have reached disparate conclusions. Using static approaches only, previous studies failed to analytically include the indirect benefits derived from herd immunity as well as the impact of vaccination on the evolution of disease incidence over time. METHODS: We assessed the impact of different pertussis vaccination strategies using a dynamic compartmental model able to consider pertussis transmission. We then combined the results with economic data to estimate the relative cost-effectiveness of pertussis immunization strategies for adolescents and adults in the US. The analysis compares combinations of programs targeting adolescents, parents of newborns (i.e. cocoon strategy, or adults of various ages. RESULTS: In the absence of adolescent or adult vaccination, pertussis incidence among adults is predicted to more than double in 20 years. Implementing an adult program in addition to childhood and adolescent vaccination either based on 1 a cocoon strategy and a single booster dose or 2 a decennial routine vaccination would maintain a low level of pertussis incidence in the long run for all age groups (respectively 30 and 20 cases per 100,000 person years. These strategies would also result in significant reductions of pertussis costs (between -77% and -80% including additional vaccination costs. The cocoon strategy complemented by a single booster dose is the most cost-effective one, whereas the decennial adult vaccination is slightly more effective in the long run. CONCLUSIONS: By providing a high level of disease control, the implementation of an adult vaccination program against pertussis appears to be highly cost-effective and often cost-saving.

  13. 3-D MDT with spherical targets by bilinear interpolation for determining blood velocity profiles including the vessel wall effect

    Science.gov (United States)

    Choomphon-anomakhun, Natthaphon; Natenapit, Mayuree

    2018-02-01

    A numerical simulation of three-dimensional (3-D) implant assisted-magnetic drug targeting (IA-MDT) using ferromagnetic spherical targets, including the effect from the vessel wall on the blood flow, is presented. The targets were implanted within arterioles and subjected to an externally uniform applied magnetic field in order to increase the effectiveness of targeting magnetic drug carrier particles (MDCPs). The capture area (As) of the MDCPs was determined by inspection of the particle trajectories simulated from the particle equations of motion. The blood flow velocities at any particle position around the target were obtained by applying bilinear interpolation to the numerical blood velocity data. The effects on As of the type of ferromagnetic materials in the targets and MDCPs, average blood flow rates, mass fraction of the ferromagnetic material in the MDCPs, average radii of MDCPs (Rp) and the externally applied magnetic field strength (μ0H0) were evaluated. Furthermore, the appropriate μ0H0 and Rp for the IA-MDT design is suggested. In the case of the SS409 target and magnetite MDCPs, dimensionless capture areas ranging from 4.1- to 12.4 and corresponding to particle capture efficiencies of 31-94% were obtained with Rp ranging from 100- to 500 nm, weight fraction of 80%, μ0H0 of 0.6 T and an average blood flow rate of 0.01 ms-1. In addition, the more general 3-D modelling of IA-MDT in this work is applicable to IA-MDT using spherical targets implanted within blood vessels for both laminar and potential blood flows including the wall effect.

  14. Compliance, Safety, and Effectiveness of Fixed-Dose Artesunate-Amodiaquine for Presumptive Treatment of Non-Severe Malaria in the Context of Home Management of Malaria in Madagascar

    Science.gov (United States)

    Ratsimbasoa, Arsène; Ravony, Harintsoa; Vonimpaisomihanta, Jeanne-Aimée; Raherinjafy, Rogelin; Jahevitra, Martial; Rapelanoro, Rabenja; Rakotomanga, Jean De Dieu Marie; Malvy, Denis; Millet, Pascal; Ménard, Didier

    2012-01-01

    Home management of malaria is recommended for prompt, effective antimalarial treatment in children less than five years of age. Compliance, safety, and effectiveness of the new fixed-dose artesunate-amodiaquine regimen used to treat suspected malaria were assessed in febrile children enrolled in a 24-month cohort study in two settings in Madagascar. Children with fever were asked to visit community health workers. Presumptive antimalarial treatment was given and further visits were scheduled for follow-up. The primary endpoint was the risk of clinical/parasitologic treatment failure. Secondary outcomes included fever/parasite clearance, change in hemoglobin levels, and frequency of adverse events. The global clinical cure rate was 98.4% by day 28 and 97.9% by day 42. Reported compliance was 83.4%. No severe adverse effects were observed. This study provides comprehensive data concerning the clinical cure rate obtained with artesunate-amodiaquine and evidence supporting the scaling up of home management of malaria. PMID:22302849

  15. Development of an enhanced health-economic model and cost-effectiveness analysis of tiotropium + olodaterol Respimat® fixed-dose combination for chronic obstructive pulmonary disease patients in Italy

    NARCIS (Netherlands)

    Selya-Hammer, C. (Carl); Gonzalez-Rojas Guix, N. (Nuria); M. Baldwin (Michael); Ternouth, A. (Andrew); M. Miravitlles; M.P.M.H. Rutten-van Mölken (Maureen); Goosens, L.M.A. (Lucas M.A.); N. Büyükkaramikli (Nasuh); Acciai, V. (Valentina)

    2016-01-01

    textabstractBackground: The objective of this study was to compare the cost-effectiveness of the fixed-dose combination (FDC) of tiotropium + olodaterol Respimat® FDC with tiotropium alone for patients with chronic obstructive pulmonary disease (COPD) in the Italian health care setting using a newly

  16. Effect of air-assisted backwashing on the performance of an anaerobic fixed-bed bioreactor that simultaneously removes nitrate and arsenic from drinking water sources.

    Science.gov (United States)

    Upadhyaya, Giridhar; Clancy, Tara M; Snyder, Kathryn V; Brown, Jess; Hayes, Kim F; Raskin, Lutgarde

    2012-03-15

    Contaminant removal from drinking water sources under reducing conditions conducive for the growth of denitrifying, arsenate reducing, and sulfate reducing microbes using a fixed-bed bioreactor may require oxygen-free gas (e.g., N2 gas) during backwashing. However, the use of air-assisted backwashing has practical advantages, including simpler operation, improved safety, and lower cost. A study was conducted to evaluate whether replacing N2 gas with air during backwashing would impact performance in a nitrate and arsenic removing anaerobic bioreactor system that consisted of two biologically active carbon reactors in series. Gas-assisted backwashing, comprised of 2 min of gas injection to fluidize the bed and dislodge biomass and solid phase products, was performed in the first reactor (reactor A) every two days. The second reactor (reactor B) was subjected to N2 gas-assisted backwashing every 3-4 months. Complete removal of 50 mg/L NO3- was achieved in reactor A before and after the switch from N2-assisted backwashing (NAB) to air-assisted backwashing (AAB). Substantial sulfate removal was achieved with both backwashing strategies. Prolonged practice of AAB (more than two months), however, diminished sulfate reduction in reactor B somewhat. Arsenic removal in reactor A was impacted slightly by long-term use of AAB, but arsenic removals achieved by the entire system during NAB and AAB periods were not significantly different (p>0.05) and arsenic concentrations were reduced from approximately 200 μg/L to below 20 μg/L. These results indicate that AAB can be implemented in anaerobic nitrate and arsenic removal systems. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. Comparing topological charge definitions using topology fixing actions

    International Nuclear Information System (INIS)

    Bruckmann, Falk; Gruber, Florian; Jansen, Karl; Marinkovic, Marina; Urbach, Carsten; Wagner, Marc

    2009-05-01

    We investigate both the hyperbolic action and the determinant ratio action designed to fix the topological charge on the lattice. We show to what extent topology is fixed depending on the parameters of these actions, keeping the physical situation fixed. At the same time the agreement between different definitions of topological charge - the field theoretic and the index definition - is directly correlated to the degree topology is fixed. Moreover, it turns out that the two definitions agree very well. We also study finite volume effects arising in the static potential and related quantities due to topology fixing. (orig.)

  18. Effectiveness of fixed-site high-frequency transcutaneous electrical nerve stimulation in chronic pain: a large-scale, observational study

    Science.gov (United States)

    Kong, Xuan; Gozani, Shai N

    2018-01-01

    Objective The objective of this study was to assess the effectiveness of fixed-site high-frequency transcutaneous electrical nerve stimulation (FS-TENS) in a real-world chronic pain sample. Background There is a need for nonpharmacological treatment options for chronic pain. FS-TENS improved multisite chronic pain in a previous interventional study. Large observational studies are needed to further characterize its effectiveness. Methods This retrospective observational cohort study examined changes in chronic pain measures following 60 days of FS-TENS use. The study data were obtained from FS-TENS users who uploaded their device utilization and clinical data to an online database. The primary outcome measures were changes in pain intensity and pain interference with sleep, activity, and mood on an 11-point numerical rating scale. Dose–response associations were evaluated by stratifying subjects into low (≤30 days), intermediate (31–56 days), and high (≥57 days) utilization subgroups. FS-TENS effectiveness was quantified by baseline to follow-up group differences and a responder analysis (≥30% improvement in pain intensity or ≥2-point improvement in pain interference domains). Results Utilization and clinical data were collected from 11,900 people using FS-TENS for chronic pain, with 713 device users meeting the inclusion and exclusion criteria. Study subjects were generally older, overweight adults. Subjects reported multisite pain with a mean of 4.8 (standard deviation [SD] 2.5) pain sites. A total of 97.2% of subjects identified low back and/or lower extremity pain, and 72.9% of subjects reported upper body pain. All pain measures exhibited statistically significant group differences from baseline to 60-day follow-up. The largest changes were pain interference with activity (−0.99±2.69 points) and mood (−1.02±2.78 points). A total of 48.7% of subjects exhibited a clinically meaningful reduction in pain interference with activity or mood. This

  19. Effectiveness of fixed-site high-frequency transcutaneous electrical nerve stimulation in chronic pain: a large-scale, observational study

    Directory of Open Access Journals (Sweden)

    Kong X

    2018-04-01

    Full Text Available Xuan Kong, Shai N Gozani NeuroMetrix, Inc., Waltham, MA, USA Objective: The objective of this study was to assess the effectiveness of fixed-site high-frequency transcutaneous electrical nerve stimulation (FS-TENS in a real-world chronic pain sample. Background: There is a need for nonpharmacological treatment options for chronic pain. FS-TENS improved multisite chronic pain in a previous interventional study. Large observational studies are needed to further characterize its effectiveness. Methods: This retrospective observational cohort study examined changes in chronic pain measures following 60 days of FS-TENS use. The study data were obtained from FS-TENS users who uploaded their device utilization and clinical data to an online database. The primary outcome measures were changes in pain intensity and pain interference with sleep, activity, and mood on an 11-point numerical rating scale. Dose–response associations were evaluated by stratifying subjects into low (≤30 days, intermediate (31–56 days, and high (≥57 days utilization subgroups. FS-TENS effectiveness was quantified by baseline to follow-up group differences and a responder analysis (≥30% improvement in pain intensity or ≥2-point improvement in pain interference domains. Results: Utilization and clinical data were collected from 11,900 people using FS-TENS for chronic pain, with 713 device users meeting the inclusion and exclusion criteria. Study subjects were generally older, overweight adults. Subjects reported multisite pain with a mean of 4.8 (standard deviation [SD] 2.5 pain sites. A total of 97.2% of subjects identified low back and/or lower extremity pain, and 72.9% of subjects reported upper body pain. All pain measures exhibited statistically significant group differences from baseline to 60-day follow-up. The largest changes were pain interference with activity (−0.99±2.69 points and mood (−1.02±2.78 points. A total of 48.7% of subjects exhibited a

  20. The effect of coverings, including plastic bags and wraps, on mortality and morbidity in preterm and full-term neonates.

    Science.gov (United States)

    Oatley, H K; Blencowe, H; Lawn, J E

    2016-05-01

    Neonatal hypothermia is an important risk factor for mortality and morbidity, and is common even in temperate climates. We conducted a systematic review to determine whether plastic coverings, used immediately following delivery, were effective in reducing the incidence of mortality, hypothermia and morbidity. A total of 26 studies (2271 preterm and 1003 term neonates) were included. Meta-analyses were conducted as appropriate. Plastic wraps were associated with a reduction in hypothermia in preterm (⩽29 weeks; risk ratio (RR)=0.57; 95% confidence interval (CI) 0.46 to 0.71) and term neonates (RR=0.76; 95% CI 0.60 to 0.96). No significant reduction in neonatal mortality or morbidity was found; however, the studies were underpowered for these outcomes. For neonates, especially preterm, plastic wraps combined with other environmental heat sources are effective in reducing hypothermia during stabilization and transfer within hospital. Further research is needed to quantify the effects on mortality or morbidity, and investigate the use of plastic coverings outside hospital settings or without additional heat sources.

  1. Modelling the effect of acoustic waves on the thermodynamics and kinetics of phase transformation in a solution: Including mass transportation.

    Science.gov (United States)

    Haqshenas, S R; Ford, I J; Saffari, N

    2018-01-14

    Effects of acoustic waves on a phase transformation in a metastable phase were investigated in our previous work [S. R. Haqshenas, I. J. Ford, and N. Saffari, "Modelling the effect of acoustic waves on nucleation," J. Chem. Phys. 145, 024315 (2016)]. We developed a non-equimolar dividing surface cluster model and employed it to determine the thermodynamics and kinetics of crystallisation induced by an acoustic field in a mass-conserved system. In the present work, we developed a master equation based on a hybrid Szilard-Fokker-Planck model, which accounts for mass transportation due to acoustic waves. This model can determine the kinetics of nucleation and the early stage of growth of clusters including the Ostwald ripening phenomenon. It was solved numerically to calculate the kinetics of an isothermal sonocrystallisation process in a system with mass transportation. The simulation results show that the effect of mass transportation for different excitations depends on the waveform as well as the imposed boundary conditions and tends to be noticeable in the case of shock waves. The derivations are generic and can be used with any acoustic source and waveform.

  2. Effect of number of pontics and impression technique on the accuracy of four-unit monolithic zirconia fixed dental prostheses.

    Science.gov (United States)

    Kim, Woong Ki; Kim, Sunjai

    2018-03-08

    Because of their relatively small scanning area, intraoral scanners may result in less accurate fixed dental prostheses (FDPs) than do laboratory scanners. The purpose of this in vitro study was to evaluate the accuracy of monolithic zirconia FDPs with different numbers of pontics fabricated with different impression techniques. The mandibular right premolars and molars of an acrylic resin model were prepared to receive 4-unit FDPs. Three master models were fabricated with epoxy resin: model NP, no pontic; model 1P, 1 pontic; and model 2P, 2 pontics. Each master model was scanned by using direct (DD) and indirect digitalization (ID). Four-unit monolithic zirconia FDPs were fabricated and divided into 3 groups (groups NP, 1P, and 2P) and then subdivided according to the digitalization technique (group DD and ID; n=10). The FDPs were also evaluated based on the presence (Po) or absence (NPo) of an adjacent pontic. The marginal, axial, and occlusal gap widths of each FDP were measured, and statistical analyses were performed to evaluate and compare the amount of gap present (α=.05). For direct digitalization, group 2P had significantly greater marginal (69.4 μm versus 60.9 μm or 62.3 μm; Pdigitalization. Direct digitalization resulted in significantly smaller gap widths in all measurement areas than indirect digitalization; however, the mean differences were less than 12 μm, which is considered clinically insignificant. The presence of an adjacent pontic had a significant effect on the adjacent marginal and axial gap widths. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  3. The effects of loading on the preload and dimensions of the abutment screw for a 3-unit cantilever-fixed prosthesis design.

    Science.gov (United States)

    Setia, Gaurav; Yousef, Hoda; Ehrenberg, David; Luke, Allyn; Weiner, Saul

    2013-08-01

    The purpose of this study was to use an in vitro model system to compare the effects on the screw torque and screw dimensions within 2 commercially available implant systems from occlusal loading on a cantilevered-fixed partial denture. Cantilevered implant-supported 3-unit prostheses with 2 premolar abutments and 1 premolar pontic (7.3 mm in length) were made on resin casts containing 2 implant analogs for 2 implant systems: BioLok Silhouette Tapered Implant System (Birmingham, AL) and Zimmer Tapered Screw-Vent Implant System (Carlsbad, CA) with 10 samples in each group. Each sample was loaded with either of 2 protocols: (1) a load of 50 N on the cantilevered pontic unit and (2) a loading of 150 N on all 3 units. The outcome measures were (1) changes in residual torque of the abutment screws and (2) changes in screw dimension. The BioLok Silhouette Tapered Implant group demonstrated slight but statistically significant torque loss 18.8% to 28.5% in both abutment screws for both protocols, P ≤ 0.05, without any changes in screw dimension. In the Zimmer Tapered Screw-Vent Implant group, there was a significant elongation of the abutment screws and a markedly significant 44.4%, (P ≤ 0.01) loss in torque in the mesial screw and a 28.5%, (P ≤ 0.05) loss in torque in the distal screw when the cantilever alone was loaded. Differences in screw design influence the maintenance of preload and distortion of the shank. The influence of the interface design, namely an internal hex of 1 mm versus an external hex did not influence the preload. Cantilevered prostheses can cause loss of torque and dimensional changes in abutment screws.

  4. The effect of aging of formalin-fixed paraffin-embedded tissues on the in situ hybridization and immunohistochemistry signals in cervical lesions.

    Science.gov (United States)

    Nuovo, Allison J; Garofalo, Michela; Mikhail, Alexandria; Nicol, Alcina F; Vianna-Andrade, Cecilia; Nuovo, Gerard J

    2013-09-01

    Formalin-fixed, paraffin-embedded tissues are widely used in biomedical research but little is known about the effect of the age of the block or unstained slides on the in situ hybridization or immunohistochemistry signal. We compared the in situ-based and immunohistochemistry-based signals for cervical intraepithelial neoplasia samples that ranged from 0 to 15 years of age. There was a progressive and statistically significant decrease in the strength of the p16 signal when comparing tissues prepared from recent unstained slides (0 to 1 y old, mean score of 92%) to those of intermediate age (5 to 7 y old, mean score of 49%) to old unstained slides (cut 13 to 15 y ago, mean score of 10%). Equivalent, progressive, and significant decreases in the intensity of the signals for microRNAs, CD45, and human papillomavirus DNA were seen in tissues stored on slides from 5 to 7 years and 13 to 15 years, respectively. However, the diminution of signal was much less, although still statistically significant, if the sections from the 13- to 15-year-old paraffin blocks were prepared in 2012. The data likely does not represent degradation of the targets as extraction of several microRNA from the old blocks showed no detectable degradation, despite the markedly weakened in situ hybridization signal. It is concluded that in situ-based signal for DNA, microRNAs, and proteins in paraffin-embedded tissues are significantly reduced over time, especially when stored long term on glass slides which, in turn, can lead to a significant underestimation of the amount and presence of the nucleic acid or protein target.

  5. Adhesives for fixed orthodontic brackets.

    Science.gov (United States)

    Mandall, Nicky A; Hickman, Joy; Macfarlane, Tatiana V; Mattick, Rye Cr; Millett, Declan T; Worthington, Helen V

    2018-04-09

    Bonding of orthodontic brackets to teeth is important to enable effective and efficient treatment with fixed appliances. The problem is bracket failure during treatment which increases operator chairside time and lengthens treatment time. A prolonged treatment is likely to increase the oral health risks of orthodontic treatment with fixed appliances one of which is irreversible enamel decalcification. This is an update of the Cochrane Review first published in 2003. A new full search was conducted on 26 September 2017 but no new studies were identified. We have only updated the search methods section in this new version. The conclusions of this Cochrane Review remain the same. To evaluate the effects of different orthodontic adhesives for bonding. Cochrane Oral Health's Information Specialist searched the following databases: Cochrane Oral Health's Trials Register (to 26 September 2017), the Cochrane Central Register of Controlled Trials (CENTRAL; 2017, Issue 8) in the Cochrane Library (searched 26 September 2017), MEDLINE Ovid (1946 to 26 September 2017), and Embase Ovid (1980 to 26 September 2017). The US National Institutes of Health Ongoing Trials Register (ClinicalTrials.gov) and the World Health Organization International Clinical Trials Registry Platform were searched for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. Trials were selected if they met the following criteria: randomised controlled trials (RCTs) and controlled clinical trials (CCTs) comparing two different adhesive groups. Participants were patients with fixed orthodontic appliances. The interventions were adhesives that bonded stainless steel brackets to all teeth except the molars. The primary outcome was debond or bracket failure. Data were recorded on decalcification as a secondary outcome, if present. Information regarding methods, participants, interventions, outcome measures and results were extracted in

  6. Tracer experiment data sets for the verification of local and meso-scale atmospheric dispersion models including topographic effects

    International Nuclear Information System (INIS)

    Sartori, E.; Schuler, W.

    1992-01-01

    Software and data for nuclear energy applications are acquired, tested and distributed by several information centres; in particular, relevant computer codes are distributed internationally by the OECD/NEA Data Bank (France) and by ESTSC and EPIC/RSIC (United States). This activity is coordinated among the centres and is extended outside the OECD area through an arrangement with the IAEA. This article proposes more specifically a scheme for acquiring, storing and distributing atmospheric tracer experiment data (ATE) required for verification of atmospheric dispersion models especially the most advanced ones including topographic effects and specific to the local and meso-scale. These well documented data sets will form a valuable complement to the set of atmospheric dispersion computer codes distributed internationally. Modellers will be able to gain confidence in the predictive power of their models or to verify their modelling skills. (au)

  7. Scattering Analysis of a Compact Dipole Array with Series and Parallel Feed Network including Mutual Coupling Effect

    Directory of Open Access Journals (Sweden)

    H. L. Sneha

    2013-01-01

    Full Text Available The current focus in defense arena is towards the stealth technology with an emphasis to control the radar cross-section (RCS. The scattering from the antennas mounted over the platform is of prime importance especially for a low-observable aerospace vehicle. This paper presents the analysis of the scattering cross section of a uniformly spaced linear dipole array. Two types of feed networks, that is, series and parallel feed networks, are considered. The total RCS of phased array with either kind of feed network is obtained by following the signal as it enters through the aperture and travels through the feed network. The RCS estimation of array is done including the mutual coupling effect between the dipole elements in three configurations, that is, side-by-side, collinear, and parallel-in-echelon. The results presented can be useful while designing a phased array with optimum performance towards low observability.

  8. Numerical simulation on the screw pinch by 2-D MHD pinch code 'topics' including impurities and neutrals effects

    International Nuclear Information System (INIS)

    Nagata, A.; Ashida, H.; Okamoto, M.; Hirano, K.

    1981-03-01

    Two dimentional fluid simulation code ''TOPICS'' is developed for the STP-2, the shock heated screw pinch at Nagoya. It involves the effects of impurity ions and neutral atoms. In order to estimate the radiation losses, the impurity continuity equations with ionizations and recombinations are solved simultaneously with the plasma fluid equations. The results are compared with the coronal equilibrium model. It is found that the coronal equilibrium model underestimates the radiation losses from shock heated pinch plasmas in its initial dynamic phase. The present calculations including impurities and neutrals show the importance of the radiation losses from the plasma of the STP-2. Introducing the anomalous resistivity caused by the ion acoustic instability, the observed magnetic field penetration is explained fairly well. (author)

  9. Cost-Effectiveness of Including a Nurse Specialist in the Treatment of Urinary Incontinence in Primary Care in the Netherlands.

    Directory of Open Access Journals (Sweden)

    K M Holtzer-Goor

    Full Text Available Incontinence is an important health problem. Effectively treating incontinence could lead to important health gains in patients and caregivers. Management of incontinence is currently suboptimal, especially in elderly patients. To optimise the provision of incontinence care a global optimum continence service specification (OCSS was developed. The current study evaluates the costs and effects of implementing this OCSS for community-dwelling patients older than 65 years with four or more chronic diseases in the Netherlands.A decision analytic model was developed comparing the current care pathway for urinary incontinence in the Netherlands with the pathway as described in the OCSS. The new care strategy was operationalised as the appointment of a continence nurse specialist (NS located with the general practitioner (GP. This was assumed to increase case detection and to include initial assessment and treatment by the NS. The analysis used a societal perspective, including medical costs, containment products (out-of-pocket and paid by insurer, home care, informal care, and implementation costs.With the new care strategy a QALY gain of 0.005 per patient is achieved while saving €402 per patient over a 3 year period from a societal perspective. In interpreting these findings it is important to realise that many patients are undetected, even in the new care situation (36%, or receive care for containment only. In both of these groups no health gains were achieved.Implementing the OCSS in the Netherlands by locating a NS in the GP practice is likely to reduce incontinence, improve quality of life, and reduce costs. Furthermore, the study also highlighted that various areas of the continence care process lack data, which would be valuable to collect through the introduction of the NS in a study setting.

  10. The effects of age-in-block on RNA-seq analysis of archival formalin-fixed paraffin-embedded (FFPE) samples

    Science.gov (United States)

    Archival samples represent a vast resource for identification of chemical and pharmaceutical targets. Previous use of formalin-fixed paraffin-embedded (FFPE) samples has been limited due to changes in RNA introduced by fixation and embedding procedures. Recent advances in RNA-seq...

  11. Fixed-site physical protection system modeling

    International Nuclear Information System (INIS)

    Chapman, L.D.

    1975-01-01

    An evaluation of a fixed-site safeguard security system must consider the interrelationships of barriers, alarms, on-site and off-site guards, and their effectiveness against a forcible adversary attack whose intention is to create an act of sabotage or theft. A computer model has been developed at Sandia Laboratories for the evaluation of alternative fixed-site security systems. Trade-offs involving on-site and off-site response forces and response times, perimeter alarm systems, barrier configurations, and varying levels of threat can be analyzed. The computer model provides a framework for performing inexpensive experiments on fixed-site security systems for testing alternative decisions, and for determining the relative cost effectiveness associated with these decision policies

  12. Sound propagation in narrow tubes including effects of viscothermal and turbulent damping with application to charge air coolers

    Science.gov (United States)

    Knutsson, Magnus; Åbom, Mats

    2009-02-01

    Charge air coolers (CACs) are used on turbocharged internal combustion engines to enhance the overall gas-exchange performance. The cooling of the charged air results in higher density and thus volumetric efficiency. It is also important for petrol engines that the knock margin increases with reduced charge air temperature. A property that is still not very well investigated is the sound transmission through a CAC. The losses, due to viscous and thermal boundary layers as well as turbulence, in the narrow cooling tubes result in frequency dependent attenuation of the transmitted sound that is significant and dependent on the flow conditions. Normally, the cross-sections of the cooling tubes are neither circular nor rectangular, which is why no analytical solution accounting for a superimposed mean flow exists. The cross-dimensions of the connecting tanks, located on each side of the cooling tubes, are large compared to the diameters of the inlet and outlet ducts. Three-dimensional effects will therefore be important at frequencies significantly lower than the cut-on frequencies of the inlet/outlet ducts. In this study the two-dimensional finite element solution scheme for sound propagation in narrow tubes, including the effect of viscous and thermal boundary layers, originally derived by Astley and Cummings [Wave propagation in catalytic converters: Formulation of the problem and finite element scheme, Journal of Sound and Vibration 188 (5) (1995) 635-657] is used to extract two-ports to represent the cooling tubes. The approximate solutions for sound propagation, accounting for viscothermal and turbulent boundary layers derived by Dokumaci [Sound transmission in narrow pipes with superimposed uniform mean flow and acoustic modelling of automobile catalytic converters, Journal of Sound and Vibration 182 (5) (1995) 799-808] and Howe [The damping of sound by wall turbulent shear layers, Journal of the Acoustical Society of America 98 (3) (1995) 1723-1730], are

  13. Effects of fixed orthodontic treatment using conventional (two-piece) versus metal injection moulding brackets on hair nickel and chromium levels: a double-blind randomized clinical trial.

    Science.gov (United States)

    Khaneh Masjedi, Mashallah; Haghighat Jahromi, Nima; Niknam, Ozra; Hormozi, Elham; Rakhshan, Vahid

    2017-02-01

    Although nickel and chromium are known as allergen and cytotoxic orthodontic metals, very few and controversial studies have assessed the effect of orthodontic treatment on their systemic levels especially those reflected by their best biomarker of exposure, hair. Additionally, metal injection moulding (MIM) brackets are not studied, and there is no study on systemic ion changes following their usage. In this double-blind randomized clinical trial, scalp hair samples of 24 female and 22 male fixed orthodontic patients [as two groups of conventional (two-piece) versus MIM brackets, n = 23×2] were collected before treatment and 6 months later. Randomization was carried out using a computer-generated random number table. The patients, laboratory expert, and author responsible for analyses were blinded of the bracket allocations. Hair nickel and chromium levels were measured using atomic absorption spectrophotometry. The effects of treatment, bracket types, gender, and age on hair ions were analysed statistically (α = 0.05, β ≤ 0.02). In both groups combined (n = 46), nickel increased from 0.1600±0.0890 µg/g dry hair mass (pre-treatment) to 0.3199±0.1706 (6th month). Chromium increased from 0.1657±0.0884 to 0.3066±0.1362 µg/g. Both of these increases were significant (paired t-test, P = 0.0000). Bracket types, age, and gender had no significant influence on ion levels (P > 0.05). ANCOVA indicated different patterns of chromium increases in different genders (P = 0.033) and ages (P = 0.056). Sample size determination should have accounted for the grouping as well. Hair nickel and chromium levels might increase about 185-200% after 6 months. They might not be affected by bracket types. Gender and age might not influence the baseline or 6th-month levels of both metals. Gender might however interact with orthodontic treatment, only in the case of chromium. The research is registered offline (thesis) and online (IR.AJUMS.REC.1394.516). The protocol was pre

  14. Effects of Hot Streak and Phantom Cooling on Heat Transfer in a Cooled Turbine Stage Including Particulate Deposition

    Energy Technology Data Exchange (ETDEWEB)

    Bons, Jeffrey [The Ohio State Univ., Columbus, OH (United States); Ameri, Ali [The Ohio State Univ., Columbus, OH (United States)

    2016-01-08

    The objective of this research effort was to develop a validated computational modeling capability for the characterization of the effects of hot streaks and particulate deposition on the heat load of modern gas turbines. This was accomplished with a multi-faceted approach including analytical, experimental, and computational components. A 1-year no cost extension request was approved for this effort, so the total duration was 4 years. The research effort succeeded in its ultimate objective by leveraging extensive experimental deposition studies complemented by computational modeling. Experiments were conducted with hot streaks, vane cooling, and combinations of hot streaks with vane cooling. These studies contributed to a significant body of corporate knowledge of deposition, in combination with particle rebound and deposition studies funded by other agencies, to provide suitable conditions for the development of a new model. The model includes the following physical phenomena: elastic deformation, plastic deformation, adhesion, and shear removal. It also incorporates material property sensitivity to temperature and tangential-normal velocity rebound cross-dependencies observed in experiments. The model is well-suited for incorporation in CFD simulations of complex gas turbine flows due to its algebraic (explicit) formulation. This report contains model predictions compared to coefficient of restitution data available in the open literature as well as deposition results from two different high temperature turbine deposition facilities. While the model comparisons with experiments are in many cases promising, several key aspects of particle deposition remain elusive. The simple phenomenological nature of the model allows for parametric dependencies to be evaluated in a straightforward manner. This effort also included the first-ever full turbine stage deposition model published in the open literature. The simulations included hot streaks and simulated vane cooling

  15. ASIC For Complex Fixed-Point Arithmetic

    Science.gov (United States)

    Petilli, Stephen G.; Grimm, Michael J.; Olson, Erlend M.

    1995-01-01

    Application-specific integrated circuit (ASIC) performs 24-bit, fixed-point arithmetic operations on arrays of complex-valued input data. High-performance, wide-band arithmetic logic unit (ALU) designed for use in computing fast Fourier transforms (FFTs) and for performing ditigal filtering functions. Other applications include general computations involved in analysis of spectra and digital signal processing.

  16. Physics landscape-fixed target energies

    International Nuclear Information System (INIS)

    Berger, E.L.

    1989-10-01

    An introductory review is presented of physics issues and opportunities at Fermilab fixed-target energies. Included are discussions of precision electroweak studies; deep inelastic lepton scattering; heavy quark production, spectroscopy, and decays; perturbative QCD; prompt photon production; massive lepton production; and spin dependence. 79 refs., 7 figs

  17. Tunnel Diode Discriminator with Fixed Dead Time

    DEFF Research Database (Denmark)

    Diamond, J. M.

    1965-01-01

    A solid state discriminator for the range 0.4 to 10 V is described. Tunnel diodes are used for the discriminator element and in a special fixed dead time circuit. An analysis of temperature stability is presented. The regulated power supplies are described, including a special negative resistance...

  18. Effects of fixed orthodontic brackets on oral malodor: A systematic review and meta-analysis according to the preferred reporting items for systematic reviews and meta-analyses guidelines.

    Science.gov (United States)

    Huang, Jing; Li, Cui-Ying; Jiang, Jiu-Hui

    2018-04-01

    This systematic review and meta-analysis aimed to identify whether there is any relationship between fixed orthodontic appliances and malodor, and if self-ligating brackets (SLBs) prevent malodor better than conventional brackets (CBs). The electronic databases PubMed, Ovid, EMBASE, and the Cochrane Library were searched from inception to September 2016; a manual search was also performed. Randomized controlled and clinical controlled trials, in which experimental groups received fixed orthodontic therapy and malodor was measured, were included. Patients treated with fixed orthodontic brackets were compared with those without any treatment, and SLB systems were compared with CB systems. Two reviewers independently selected potentially relevant studies, evaluated the risk for bias, extracted essential data, and synthesized findings using Review Manager version 5.3 (Copenhagen: The. Nordic Cochrane Centre, The Cochrane Collaboration, 2014). Four studies, involving a total of 152 participants, met the inclusion criteria. Fixed orthodontic appliances caused malodor from the initial visit to 2 to 3 months, but was only significant after the first week (mean difference 20.24 [95% confidence interval [CI]11.75-28.74]; P orthodontic treatment appeared to be a risk factor for malodor, independent of periodontal changes, and SLB systems controlled malodor better than CB systems.

  19. Effect on attendance by including focused information on spirometry in preventive health checks: study protocol for a randomized controlled trial.

    Science.gov (United States)

    Ørts, Lene Maria; Løkke, Anders; Bjerregaard, Anne-Louise; Maindal, Helle Terkildsen; Sandbæk, Annelli

    2016-12-01

    Early detection of lung diseases can help to reduce their severity. Lung diseases are among the most frequently occurring and serious diseases worldwide; nonetheless, many patients remain undiagnosed. Preventive health checks including spirometry can detect lung diseases at early stages; however, recruitment for health checks remains a challenge, and little is known about what motivates the attendance. The aim of the study is to examine whether focused information on spirometry in the invitation compared to general information will impact the attendance rate in preventive health checks. This randomized, controlled trial tests the effect of information on spirometry embedded in the Check your Health Preventive Program (CHPP). The CHPP is an open-label, household cluster-randomized, controlled trial offering a preventive health check to 30- to -49-year-olds in a Danish municipality from 2012 to 2017 (n = 26,216). During 2015-2016, 4356 citizens aged 30-49 years will be randomized into two groups. The intervention group receives an invitation which highlights the value and contents of spirometry as part of a health check and information about lung diseases. The comparison group receives a standard invitation containing practical information and specifies the contents of the general health check. Outcomes are (1) differences in attendance rates measured by the proportion of citizens attending each of the two study groups and (2) proportion of persons at risk defined by smoking status and self-reported lung symptoms in the study groups. The proportion of participants with abnormal spirometry assessed at the preventive health check will be compared between the two study groups. The results from the present study will inform future recruitment strategies to health checks. The developed material on content, value, and information about lung disease is feasible and transferable to other populations, making it easy to implement if effective. ClinicalTrials.gov: NCT

  20. The Evaporation and Survival of Cluster Galaxy Coronae. I. The Effectiveness of Isotropic Thermal Conduction Including Saturation

    Energy Technology Data Exchange (ETDEWEB)

    Vijayaraghavan, Rukmani; Sarazin, Craig, E-mail: rukmani@virginia.edu [Department of Astronomy, University of Virginia, 530 McCormick Rd., Charlottesville, VA 22904 (United States)

    2017-05-20

    We simulate the evolution of cluster galaxy hot interstellar medium (ISM) gas that is a result of the effects of ram pressure and thermal conduction in the intracluster medium (ICM). At the density and temperature of the ICM, the mean free paths of ICM electrons are comparable to the sizes of galaxies, therefore electrons can efficiently transport heat that is due to thermal conduction from the hot ICM to the cooler ISM. Galaxies consisting of dark matter halos and hot gas coronae are embedded in an ICM-like “wind tunnel” in our simulations. In this paper, we assume that thermal conduction is isotropic and include the effects of saturation. We find that as heat is transferred from the ICM to the ISM, the cooler denser ISM expands and evaporates. This process is significantly faster than gas loss due to ram pressure stripping; for our standard model galaxy, the evaporation time is 160 Myr, while the ram pressure stripping timescale is 2.5 Gyr. Thermal conduction also suppresses the formation of shear instabilities, and there are no stripped ISM tails since the ISM evaporates before tails can form. Observations of long-lived X-ray emitting coronae and ram pressure stripped X-ray tails in galaxies in group and cluster environments therefore require that thermal conduction is suppressed or offset by some additional physical process. The most likely process is anisotropic thermal conduction that is due to magnetic fields in the ISM and ICM, which we simulate and study in the next paper in this series.

  1. The Evaporation and Survival of Cluster Galaxy Coronae. I. The Effectiveness of Isotropic Thermal Conduction Including Saturation

    International Nuclear Information System (INIS)

    Vijayaraghavan, Rukmani; Sarazin, Craig

    2017-01-01

    We simulate the evolution of cluster galaxy hot interstellar medium (ISM) gas that is a result of the effects of ram pressure and thermal conduction in the intracluster medium (ICM). At the density and temperature of the ICM, the mean free paths of ICM electrons are comparable to the sizes of galaxies, therefore electrons can efficiently transport heat that is due to thermal conduction from the hot ICM to the cooler ISM. Galaxies consisting of dark matter halos and hot gas coronae are embedded in an ICM-like “wind tunnel” in our simulations. In this paper, we assume that thermal conduction is isotropic and include the effects of saturation. We find that as heat is transferred from the ICM to the ISM, the cooler denser ISM expands and evaporates. This process is significantly faster than gas loss due to ram pressure stripping; for our standard model galaxy, the evaporation time is 160 Myr, while the ram pressure stripping timescale is 2.5 Gyr. Thermal conduction also suppresses the formation of shear instabilities, and there are no stripped ISM tails since the ISM evaporates before tails can form. Observations of long-lived X-ray emitting coronae and ram pressure stripped X-ray tails in galaxies in group and cluster environments therefore require that thermal conduction is suppressed or offset by some additional physical process. The most likely process is anisotropic thermal conduction that is due to magnetic fields in the ISM and ICM, which we simulate and study in the next paper in this series.

  2. Fixed Dose Combination for TB treatment

    Directory of Open Access Journals (Sweden)

    Tjandra Y. Aditama

    2003-06-01

    Full Text Available According to the World Health Organization, a third of the world’s population is infected with tuberculosis. The disease is responsible for nearly 2 million deaths each year and over 8 million were developing active diseases. Moreover, according to WHO (2000, tuberculosis deaths are estimated to increase to 35 million between 2000-2020. The majority of tuberculosis patients worldwide are still treated with single drugs, or with 2-drug fixed-dose combinations (FDCs. To improve tuberculosis treatment, 2- and 3-drug FDCs were recommended by the World Health Organization (WHO as part of the DOTS strategy. Since 1999 a 4-drug FDC was included on the WHO Model List of Essential Drugs. Today, FDCs are important tools to further improve the quality of care for people with TB, and accelerate DOTS expansion to reach the global TB control targets. Fixed dose combination TB drugs could simplifies both treatment and management of drug supply, and may prevent the emergence of drug resistance .Prevention of drug resistance is just one of the potential benefits of the use of FDCs. FDCs simplify administration of drugs by reducing the number of pills a patient takes each day and decreasing the risk of incorrect prescriptions. Most tuberculosis patients need only take 3–4 FDCs tablets per day during the intensive phase of treatment, instead of the 15–16 tablets per day that is common with single-drug formulations It is much simpler to explain to patients that they need to take four tablets of the same type and colour, rather than a mixture of tablets of different shapes, colours and sizes. Also, the chance of taking an incomplete combination of drugs is eliminated, since the four essential drugs are combined into one tablet. FDCs are also simpler for care-givers as they minimize the risk of confusion. Finally, drug procurement, in all its components (stock management, shipping, distribution, is simplified by FDCs. Adverse reactions to drugs are not more

  3. Numerical modeling of straw combustion in a fixed bed

    DEFF Research Database (Denmark)

    Zhou, Haosheng; Jensen, Anker; Glarborg, Peter

    2005-01-01

    . The straw combustion processes include moisture evaporation, straw pyrolysis, gas combustion, and char combustion. The model provides detailed information of the structure of the ignition flame front. Simulated gas species concentrations at the bed surface, ignition flame front rate, and bed temperature......Straw is being used as main renewable energy source in grate boilers in Denmark. For optimizing operating conditions and design parameters, a one-dimensional unsteady heterogeneous mathematical model has been developed and experiments have been carried out for straw combustion in a fixed bed...... are in good agreement with measurements at different operating conditions such as primary air-flow rate, pre-heating of the primary air, oxygen concentration, moisture content in straw, and bulk density of the straw in the fixed bed. A parametric study indicates that the effective heat conductivity, straw...

  4. Fixed points of quantum gravity

    OpenAIRE

    Litim, D F

    2003-01-01

    Euclidean quantum gravity is studied with renormalisation group methods. Analytical results for a non-trivial ultraviolet fixed point are found for arbitrary dimensions and gauge fixing parameter in the Einstein-Hilbert truncation. Implications for quantum gravity in four dimensions are discussed.

  5. A quasi-static algorithm that includes effects of characteristic time scales for simulating failures in brittle materials

    KAUST Repository

    Liu, Jinxing

    2013-04-24

    When the brittle heterogeneous material is simulated via lattice models, the quasi-static failure depends on the relative magnitudes of Telem, the characteristic releasing time of the internal forces of the broken elements and Tlattice, the characteristic relaxation time of the lattice, both of which are infinitesimal compared with Tload, the characteristic loading period. The load-unload (L-U) method is used for one extreme, Telem << Tlattice, whereas the force-release (F-R) method is used for the other, Telem T lattice. For cases between the above two extremes, we develop a new algorithm by combining the L-U and the F-R trial displacement fields to construct the new trial field. As a result, our algorithm includes both L-U and F-R failure characteristics, which allows us to observe the influence of the ratio of Telem to Tlattice by adjusting their contributions in the trial displacement field. Therefore, the material dependence of the snap-back instabilities is implemented by introducing one snap-back parameter γ. Although in principle catastrophic failures can hardly be predicted accurately without knowing all microstructural information, effects of γ can be captured by numerical simulations conducted on samples with exactly the same microstructure but different γs. Such a same-specimen-based study shows how the lattice behaves along with the changing ratio of the L-U and F-R components. © 2013 The Author(s).

  6. Quality assurance (QA) training at Westinghouse including innovative approaches for achieving an effective QA programme and establishing constructive interaction

    International Nuclear Information System (INIS)

    Chivers, J.H.; Scanga, B.E.

    1982-01-01

    Experience of the Westinghouse Water Reactors Division with indoctrination and training of quality engineers includes training of personnel from Westinghouse divisions in the USA and overseas as well as of customers' personnel. A written plan is prepared for each trainee in order to fit the training to the individual's needs, and to cover the full range of information and activities. The trainee is also given work assignments, working closely with experienced quality engineers. He may prepare inspection plans and audit check lists, assist in the preparation of QA training modules, write procedures, and perform supplier surveillance and data analyses, or make special studies of operating systems. The trainee attends seminars and special courses on work-related technical subjects. Throughout the training period, emphasis is placed on inculcating an attitude of team work in the trainee so that the result of the training is the achievement of both quality and productivity. Certification is extended (given that education/experience/skill requirements are met) to such functions as mechanical equipment quality engineering, electrical equipment quality engineering, and start-up and testing quality engineering. A well-trained quality engineer is equipped to provide technical assistance to other disciplines and, through effective co-operation with others, contributes to the success of the organization's endeavours. (author)

  7. New 3D technologies applied to assess the long-term clinical effects of misfit of the full jaw fixed prosthesis on dental implants.

    Science.gov (United States)

    Jokstad, Asbjørn; Shokati, Babak

    2015-10-01

    To assess implant:suprastructure misfit in patients with an edentulous jaw restored by an implant-retained fixed dental prosthesis (FDP) and its association with biologic and mechanical adverse events over an extensive period. Thirty patients with an edentulous mandible treated with implant-supported prosthetics before 2000 were examined clinically in 2012. Each patient had received 4 to 6 implants to retain a FDP made from acrylic and three different metal alloys, that is, Ag-Pd, Pd-Ag, and Au type IV. The implant intra-oral locations were recorded digitally by use of an intra-oral scanner, and the intaglio surface of the detached FDP was recorded using a desktop scanner. The fit was estimated by digital matching of the STL files using industrial metrological software. The average misfit was correlated with the average marginal bone loss and the prevalence of screw loosening or fractures, using the patient as the statistical unit. Over an average of 19 years (range 12 to 32), 5 implants had been lost in 4 participants (96.7% implant survival) and 8 eight prostheses (26.7%) had been remade. Anaverage misfit was 150 μm (SD 35, range 95-232, CI 138-163). An average marginal bone loss of 2.2 mm (SD = 0.7) had occurred (range 0.6 to 5.8 mm) for individual implants. The correlation between framework misfit and marginal bone loss was weak (R² = 0.04) (P = 0.29). The prostheses with a history of screw-related adverse events showed average misfit of 169 μm (SD = 32) vs. those with no history of screw-related adverse events, that is, 134 μm (SD = 30) (P = 0.005, Student's t-test). Fourteen of the 30 participants had experienced at least one incidence of screw loosening or fracture of prosthetic or abutment screw(s) over the period of follow-up. The occurrence among the frameworks fabricated with different metal alloys did not differ (P > 0.05, Fisher's exact test). Combining STL files with best-fit algorithms to appraise misfit is feasible using

  8. Effect of different surface treatments and retainer designs on the retention of posterior Pd-Ag porcelain-fused-to-metal resin-bonded fixed partial dentures.

    Science.gov (United States)

    Chen, Xiwen; Zhang, Yixin; Zhou, Jinru; Chen, Chenfeng; Zhu, Zhimin; Li, Lei

    2018-02-01

    The aim of this study was to investigate the adhesive property of palladium-silver alloy (Pd-Ag) and the simulated clinical performance of Pd-Ag porcelain-fused-to-metal (PFM), resin-bonded, fixed partial dentures (RBFPDs). A total of 40 Pd-Ag discs (diameter=5 mm) were prepared and divided into the following four groups (n=10): a) No sandblasting, used as a control; and b, 50 µm; c, 110 µm; and d, 250 µm aluminum oxide (Al 2 O 3 ) particles, respectively. Another 50 discs were pre-sandblasted and divided into five groups (n=10) subjected to different treatments: e) Sandblasting, used as a control; f) silane; g) alloy primer; h) silica coating + silane and i) silica coating + alloy primer. All 90 discs were bonded to enamel with Panavia F 2.0 and then subjected to shear bond strength (SBS) testing. The fracture surfaces were examined by scanning electron microscopy. Next, 40 missing maxillary second premolar models were restored with one of the four following RBFPD designs (n=10): I) A premolar occlusal bar combined with molar double rests (MDR); II) both occlusal bars with a wing (OBB); III) a premolar occlusal bar combined with a molar dental band (MDB); and IV) two single rests adjacent to the edentulous space with a wing (SRB) used as a control. All specimens were aged with thermal cycling and mechanical loading. Subsequently, they were loaded until broken. The data were analyzed by one-way analysis of variance. Al 2 O 3 (250 µm) abrasion provided the highest SBS (P<0.05). The alloy primer and silica + silane exhibited increased SBS. Furthermore, fracture analysis revealed that the failure mode varied among the different treatments. Whereas MDB exhibited the highest retention (P<0.05), that of OBB was greater than that of MDR (P<0.05), and the control exhibited the lowest retention. Abrasion with Al 2 O 3 (250 µm) effectively increased the adhesive property of Pd-Ag. Additionally, treatment with the alloy primer and silica coating + silane was able to

  9. Solar tracker motor having a fixed caliper and a translating caliper each with an electromagnetic brake system

    Science.gov (United States)

    Rau, Scott James

    2013-01-29

    Concepts and technologies described herein provide for an accurate and cost-effective method for rotating a solar array disk for tracking the movement of the sun. According to various aspects, a motor includes a fixed caliper and a translating caliper positioned adjacent to one another. Electromagnetically controlled brakes on the translating caliper grip the solar array disk while adjacent, but spaced apart, electromagnets on the fixed caliper and the translating caliper are energized to create an attractive force that pulls the translating caliper with the solar array disk toward the fixed caliper. After reaching the fixed caliper, brakes on the fixed caliper are engaged with the disk, brakes on the translating caliper are released from the disk, and the translating caliper is pushed back to the starting location where the process repeats until the desired rotation is completed.

  10. Use and effectiveness of a fixed-ratio combination of insulin degludec/liraglutide (IDegLira) in a real-world population with type 2 diabetes: Results from a European, multicentre, retrospective chart review study.

    Science.gov (United States)

    Price, Hermione; Blüher, Matthias; Prager, Rudolf; Phan, Tra-Mi; Thorsted, Brian L; Schultes, Bernd

    2018-04-01

    To describe the real-world use and effectiveness of IDegLira, a fixed-ratio combination of the basal insulin degludec, and the glucagon-like peptide-1 receptor agonist (GLP-1RA) liraglutide. This European, multicentre, retrospective chart review comprised adults (n = 611) with type 2 diabetes, who started IDegLira ≥6 months before data collection. Clinical characteristics were assessed at baseline (defined as the most recent recording during the 6 months before the first IDegLira prescription) and 3, 6, 9 and 12 months (± 45 days for each time point) after commencing IDegLira, where data were available. Baseline regimens included non-injectable medications (19%), basal insulin (19%), GLP-1RA (10%), free combination therapy (insulin/GLP-1RA, 24%) and multiple daily-dose insulin injections (MDI, 28%), all ± oral antidiabetic drugs. After 6 months, significant glycated haemoglobin (HbA1c) reductions were observed in patients overall and in all subgroups (-10 mmol/mol [-0.9%] overall; P world practice, after 6 months and at a moderate dose, IDegLira resulted in substantial reductions in HbA1c and body weight, with a reduced risk of hypoglycaemia. © 2017 The Authors. Diabetes, Obesity and Metabolism published by John Wiley & Sons Ltd.

  11. Infrared fixed points and fixed lines in the top-bottom-tau sector in supersymmetric grand unification

    International Nuclear Information System (INIS)

    Schrempp, B.

    1994-10-01

    The two loop 'top-down' renormalization group flow for the top, bottom and tau Yukawa couplings, from μ=M GUT ≅O(10 16 GeV) to μ≅m t , is explored in the framework of supersymmetric grand unification; reproduction of the physical bottom and tau masses is required. Instead of following the recent trend of implementing exact Yukawa coupling unification i) a search for infrared (IR) fixed lines and fixed points in the m t pole -tan β plane is performed and ii) the extent to which these imply approximate Yukawa unification is determined. In the m t pole -tan β plane two IR fixed lines, intersecting in an IR fixed point, are located. The more attractive fixed line has a branch of almost constant top mass, m t pole ≅168≅180 GeV (close to the experimental value), for the large interval 2.5 GUT approximately. The less attractive fixed line as well as the fixed point at m t pole ≅170 GeV, tan β≅55 implement approximate top-bottom Yukawa unification at all scales μ. The renormalization group flow is attracted towards the IR fixed point by way of the more attractive IR fixed line. The fixed point and lines are distinct from the much quoted effective IR fixed point m t pole ≅O(200 GeV) sin β. (orig.)

  12. Comparison of the Effects of Fluidized-Bed and Fixed-Bed Reactors in Microwave-Assisted Catalytic Decomposition of TCE by Hydrogen

    Directory of Open Access Journals (Sweden)

    Lili Ren

    2012-01-01

    Full Text Available Trichloroethylene (TCE decomposition by hydrogen with microwave heating under different reaction systems was investigated. The activities of a series of catalysts for microwave-assisted TCE hydrodechlorination were tested through the fixed-bed and the fluidized-bed reactor systems. This study found that the different reaction system is suitable for different catalyst type. And there is an interactive relationship between the catalyst type and the reaction bed type.

  13. IMPLICATION OF THE FIXED COMBINATIONS IN THE HYPERTENSION TREATMENT

    Directory of Open Access Journals (Sweden)

    Z. D. Kobalava

    2010-01-01

    Full Text Available The role of fixed combinations in the hypertension (HT treatment is discussed. Theoretical and practical aspects of combination therapy, principles of rational combination therapy are present. Current guidelines on the use of fixed dose combinations, including start antihypertensive therapy are analyzed. Classification of combinations, advantages and limitations of some of them implementation are also presented. Significance of beta-blocker bisoprolol and thiazide diuretic hydrochlorothiazide fixed combination (Lodoz is shown in HT treatment.

  14. Analysis of quantum ballistic electron transport in ultrasmall silicon devices including space-charge and geometric effects

    Science.gov (United States)

    Laux, S. E.; Kumar, A.; Fischetti, M. V.

    2004-05-01

    A two-dimensional device simulation program which self consistently solves the Schrödinger and Poisson equations with current flow is described in detail. Significant approximations adopted in this work are the absence of scattering and a simple six-valley, parabolic band structure for silicon. A modified version of the quantum transmitting boundary method is used to describe open boundary conditions permitting current flow in device solutions far from equilibrium. The continuous energy spectrum of the system is discretized by temporarily imposing two different forms of closed boundary conditions, resulting in energies which sample the density-of-states and establish the wave function normalization conditions. These standing wave solutions ("normal modes") are decomposed into their traveling wave constituents, each of which represents injection from only one of the open boundary contacts ("traveling eigencomponents"). These current-carrying states are occupied by a drifted Fermi distribution associated with their injecting contact and summed to form the electron density in the device. Holes are neglected in this calculation. The Poisson equation is solved on the same finite element computational mesh as the Schrödinger equation; devices of arbitrary geometry can be modeled. Computational performance of the program including characterization of a "Broyden+Newton" algorithm employed in the iteration for self consistency is described. Device results are presented for a narrow silicon resonant tunneling diode (RTD) and many variants of idealized silicon double-gate field effect transistors (DGFETs). The RTD results show two resonant conduction peaks, each of which demonstrates hysteresis. Three 7.5 nm channel length DGFET structures with identical intrinsic device configurations but differing access geometries (straight, taper and "dog bone") are studied and found to have differing current flows owing to quantum-mechanical reflection in their access regions

  15. Fixed-dose combination therapy for the prevention of cardiovascular disease

    Science.gov (United States)

    de Cates, Angharad N; Farr, Matthew RB; Rees, Karen; Casas, Juan P; Huffman, Mark

    2014-01-01

    This is the protocol for a review and there is no abstract. The objectives are as follows: To determine the effectiveness of fixed-dose combination therapy on optimising CVD risk factors and reducing CVD fatal and non-fatal events for both primary and secondary prevention of CVD. Details of CVD events and risk factors included are listed in the methods. We will also determine any adverse events associated with taking fixed-dose combination therapy. This will include studies conducted in both developed and developing regions of the world. PMID:25267903

  16. Fixed drug eruption resulting from fluconazole use: a case report

    Directory of Open Access Journals (Sweden)

    Tavallaee Mahkam

    2009-07-01

    Full Text Available Abstract Introduction Fluconazole is a widely used antifungal agent with a possible side effect of fixed drug eruption. However, this adverse drug effect is absent from the reported list of possible side effects of fluconazole. We are presenting a rare case in our report. Case presentation A 25-year-old Iranian woman developed fixed drug eruptions on different sites of her body after taking five doses of fluconazole to treat vaginal candidiasis. A positive patch test, positive oral challenge test and skin biopsy were all found to be consistent with fixed drug eruption. Conclusion Fluconazole is a widely prescribed drug, used mainly to treat candidiasis. Fixed drug eruption as a possible side effect of Fluconazole is not well known and thus, the lesions may be misdiagnosed and mistreated. Based on our findings, which are consistent with a number of other practitioners, we recommend adding fixed drug eruption to the list of possible side effects of fluconazole.

  17. Fixing the Leak

    DEFF Research Database (Denmark)

    Dlugosz, Stephan; Stephan, Gesine; Wilke, Ralf A.

    2014-01-01

    We present first empirical results on the effects of a large scale reduction in unemployment benefit entitlement lengths on unemployment inflows in Germany. We show that this highly disputed element of the Hartz-Reforms in 2006 induced a rush of workers and firms to take advantage of the previous...

  18. Fixed telephony evolution at CERN

    CERN Multimedi