WorldWideScience

Sample records for include feasibility studies

  1. A pre-feasibility case study on integrated resource planning including renewables

    International Nuclear Information System (INIS)

    Yilmaz, Pelin; Hakan Hocaoglu, M.; Konukman, Alp Er S.

    2008-01-01

    In recent years, economical and environmental constraints force governments and energy policy decision-makers to change the prominent characteristics of the electricity markets. Accordingly, depending on local conditions on the demand side, usage of integrated resource planning approaches in conjunction with renewable technologies has gained more importance. In this respect, an integrated resource planning option, which includes the design and optimization of grid-connected renewable energy plants, should be evaluated to facilitate a cost-effective and green solution to a sustainable future. In this paper, an integrated resource planning case is studied for an educational campus, located in Gebze, Turkey. It is found that for the considered campus, the integrated resource planning scenario that includes renewables as a supply-side option with existing time-of-use tariff may provide a cost-effective energy production, particularly for the high penetration level of the renewables. (author)

  2. Feasibility study

    International Nuclear Information System (INIS)

    Gibbs, P.; Kalas, P.

    1975-01-01

    The feasibility study itself examines the technical, economic and financial implications of a nuclear power station in depth so as to make sure that nuclear power is the right course to take. This means that it is quite an expensive operation and it is to avoid wasting this money that a pre-feasibility study is carried out. This preliminary study should eliminate cases where the electrical system cannot absorb the capacity of a nuclear station of commercial size, where other sources of power such as hydro-electricity, gas or cheap coal would make nuclear obviously uneconomic or where no suitable sites exist. If this first rather simple survey shows that nuclear power is a credible solution to a utilities need for electricity or heat production plant, then the next stage is a full feasibility study. (orig./TK) [de

  3. Feasibility of including patients with migration background in a structured heart failure management programme: A prospective case-control study exemplarily on Turkish migrants.

    Directory of Open Access Journals (Sweden)

    Roman Pfister

    Full Text Available Structured management programmes deliver optimized care in heart failure patients and improve outcome. We examined the feasibility of including patients with migration background speaking little or no German in a heart failure management programme.After adaption of script material and staff to Turkish language we aimed to recruit 300 Turkish and 300 German (control group patients within 18 months using the operational basis of a local heart failure management programme for screening, contact and inclusion. Of 488 and 1,055 eligible Turkish and German patients identified through screening, 165 Turkish (34% and 335 German (32% patients consented on participation (p = 0.46. General practitioners contributed significantly more of the Turkish (84% than of the German patients (16%, p<0.001. Contact attempts by programme staff were significantly less successful in Turkish (52% than in German patients (60%, p = 0.005 due to significantly higher rate of missing phone numbers (36% vs 25%, invalid address data (28% vs 7% and being unreachable by phone more frequently (39% vs 26%, all p<0.001. Consent rate was significantly higher in successfully contacted Turkish (63% compared to German patients (50%, p<0.001.The inclusion of Turkish minority patients into a heart failure management programme is feasible with higher consent rate than in Germans. However, effort is high due to inherent logistic adaptions and barriers in identification and contacting of patients.DRKS00007780.

  4. Whole-body-MR imaging including DWIBS in the work-up of patients with head and neck squamous cell carcinoma: A feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Noij, Daniel P., E-mail: d.noij@vumc.nl [Department of Radiology and Nuclear Medicine, VU University Medical Center, De Boelelaan 1117, PO Box 7057, 1007 MB Amsterdam (Netherlands); Boerhout, Els J., E-mail: e.boerhout@vumc.nl [Department of Radiology and Nuclear Medicine, VU University Medical Center, De Boelelaan 1117, PO Box 7057, 1007 MB Amsterdam (Netherlands); Pieters-van den Bos, Indra C., E-mail: i.pieters@vumc.nl [Department of Radiology and Nuclear Medicine, VU University Medical Center, De Boelelaan 1117, PO Box 7057, 1007 MB Amsterdam (Netherlands); Comans, Emile F., E-mail: efi.comans@vumc.nl [Department of Radiology and Nuclear Medicine, VU University Medical Center, De Boelelaan 1117, PO Box 7057, 1007 MB Amsterdam (Netherlands); Oprea-Lager, Daniela, E-mail: d.oprea-lager@vumc.nl [Department of Radiology and Nuclear Medicine, VU University Medical Center, De Boelelaan 1117, PO Box 7057, 1007 MB Amsterdam (Netherlands); Reinhard, Rinze, E-mail: r.reinhard@vumc.nl [Department of Radiology and Nuclear Medicine, VU University Medical Center, De Boelelaan 1117, PO Box 7057, 1007 MB Amsterdam (Netherlands); Hoekstra, Otto S., E-mail: os.hoekstra@vumc.nl [Department of Radiology and Nuclear Medicine, VU University Medical Center, De Boelelaan 1117, PO Box 7057, 1007 MB Amsterdam (Netherlands); Bree, Remco de, E-mail: r.debree@vumc.nl [Department Otolaryngology/Head and Neck Surgery, VU University Medical Center, De Boelelaan 1117, PO Box 7057, 1007 MB Amsterdam (Netherlands); Graaf, Pim de, E-mail: p.degraaf@vumc.nl [Department of Radiology and Nuclear Medicine, VU University Medical Center, De Boelelaan 1117, PO Box 7057, 1007 MB Amsterdam (Netherlands); Castelijns, Jonas A., E-mail: j.castelijns@vumc.nl [Department of Radiology and Nuclear Medicine, VU University Medical Center, De Boelelaan 1117, PO Box 7057, 1007 MB Amsterdam (Netherlands)

    2014-07-15

    Objectives: To assess the feasibility of whole-body magnetic resonance imaging (WB-MRI) including diffusion-weighted whole-body imaging with background-body-signal-suppression (DWIBS) for the evaluation of distant malignancies in head and neck squamous cell carcinoma (HNSCC); and to compare WB-MRI findings with {sup 18}F-fluorodeoxyglucose positron emission tomography/computed tomography ({sup 18}F-FDG-PET/CT) and chest-CT. Methods: Thirty-three patients with high risk for metastatic spread (26 males; range 48–79 years, mean age 63 ± 7.9 years (mean ± standard deviation) years) were prospectively included with a follow-up of six months. WB-MRI protocol included short-TI inversion recovery and T1-weighted sequences in the coronal plane and half-fourier acquisition single-shot turbo spin-echo T2 and contrast-enhanced-T1-weighted sequences in the axial plane. Axial DWIBS was reformatted in the coronal plane. Interobserver variability was assessed using weighted kappa and the proportion specific agreement (PA). Results: Two second primary tumors and one metastasis were detected on WB-MRI. WB-MRI yielded seven clinically indeterminate lesions which did not progress at follow-up. The metastasis and one second primary tumor were found when combining {sup 18}F-FDG-PET/CT and chest-CT findings. Interobserver variability for WB-MRI was κ = 0.91 with PA ranging from 0.82 to 1.00. For {sup 18}F-FDG-PET/CT κ could not be calculated due to a constant variable in the table and PA ranged from 0.40 to 0.99. Conclusions: Our WB-MRI protocol with DWIBS is feasible in the work-up of HNSCC patients for detection and characterization of distant pathology. WB-MRI can be complementary to {sup 18}F-FDG-PET/CT, especially in the detection of non {sup 18}F-FDG avid second primary tumors.

  5. Feasibility studies and technological innovation

    DEFF Research Database (Denmark)

    Hvelplund, Frede Kloster; Lund, Henrik; Sukkumnoed, Decharut

    2004-01-01

    The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives.......The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives....

  6. Feasibility studies for decommissioning

    International Nuclear Information System (INIS)

    Hladky, E.

    2000-01-01

    In this presentation author deals with planning of decommission of the NPPs A1, V1 and V2 Bohunice and Mochovce. It was concluded that: Used model for decommissioning parameters assessment has been suitable for elaboration of initial decommissioning plans (feasibility studies); Basic assessment of main decommissioning parameters and basic comparison of various decommissioning options have been possible; Improvement of the model and corresponding software is desirable and works on software improvement began one year ago; V1-NPP initial decommissioning plan should be actualized, because initial decommissioning plan does not correspond by its content and structure to requirements of Act No. 130/98 and Nuclear Regulatory Authority Degree No. 246/99; Strategy of radioactive wastes treatment and conditioning together with technical provisions at Jaslovske Bohunice site was changed in comparison with the assumptions in 1991-92; Considered V1 NPP decommissioning options are necessary to be re-evaluated in accordance with latest development of knowledge and approaches to NPP decommissioning in the world; Specific unit costs are substantially and differentially changed in comparison with the assumptions in 1991-92; Necessity to take into account technical changes resulted from V1 NPP reconstruction. (author)

  7. Revie ⊕: the influence of a life review intervention including a positive, patient-centered approach towards enhancing the personal dignity of patients with advanced cancer-a study protocol for a feasibility study using a mixed method investigation.

    Science.gov (United States)

    Da Rocha Rodrigues, Maria Goreti; Pautex, Sophie; Shaha, Maya

    2016-01-01

    It is generally recognized that existential concerns must be addressed to promote the dignity of patients with advanced cancer. A number of interventions have been developed in this regard, such as dignity therapy and other life review interventions (LRI). However, so far, none have focused on a positive approach or evaluated its effects on dignity and personal growth. This study aims to explore the feasibility of Revie ⊕, a life review intervention comprising a positive, patient-centered approach, and to determine potential changes of patients' sense of dignity, posttraumatic growth, and satisfaction with life. A mixed method study will be performed, which includes specialized nurses and 40 patients with advanced cancer in an ambulatory and in-patient setting of a Swiss university hospital. Quantitative methods involve a single group, pre- and post-intervention, and outcome measurements include the Patient Dignity Inventory, the Posttraumatic Growth Inventory, and the Satisfaction with Life Scale. Feasibility data relating to process, resource, and scientific elements of the trial will also be collected. A semi-directed interview will be used to collect qualitative data about the process and the participants' experiences of the intervention. In this way, enhanced quantitative-qualitative evidence can be drawn from outcome measures as well as individual, contextualized personal views, to help inform researchers about the plausibility of this complex intervention before testing its effectiveness in a subsequent full trial. Patient dignity is a goal of quality end-of-life care. To our knowledge, this is the first trial to evaluate the role of a life review intervention that is focused on personal growth and on changes relating to the experience of having cancer. This study will evaluate the feasibility of a novel intervention, Revie ⊕, which we hope will contribute to promote the dignity, personal growth, and overall life satisfaction of patients with advanced

  8. GINGER: A feasibility study

    Science.gov (United States)

    Di Virgilio, Angela D. V.; Belfi, Jacopo; Ni, Wei-Tou; Beverini, Nicolo; Carelli, Giorgio; Maccioni, Enrico; Porzio, Alberto

    2017-04-01

    GINGER (Gyroscopes IN General Relativity) is a proposal for an Earth-based experiment to measure the Lense-Thirring (LT) and de Sitter effects. GINGER is based on ring lasers, which are the most sensitive inertial sensors to measure the rotation rate of the Earth. We show that two ring lasers, one at maximum signal and the other horizontal, would be the simplest configuration able to retrieve the GR effects. Here, we discuss this configuration in detail showing that it would have the capability to test LT effect at 1%, provided the accuracy of the scale factor of the instrument at the level of 1 part in 1012 is reached. In principle, one single ring laser could do the test, but the combination of the two ring lasers gives the necessary redundancy and the possibility to verify that the systematics of the lasers are sufficiently small. The discussion can be generalised to seismology and geodesy and it is possible to say that signals 10-12 orders of magnitude below the Earth rotation rate can be studied; the proposed array can be seen as the basic element of multi-axial systems, and the generalisation to three dimensions is feasible adding one or two devices and monitoring the relative angles between different ring lasers. This simple array can be used to measure with very high precision the amplitude of angular rotation rate (the length of the day, LOD), its short term variations, and the angle between the angular rotation vector and the horizontal ring laser. Finally this experiment could be useful to probe gravity at fundamental level giving indications on violations of Einstein Equivalence Principle and Lorenz Invariance and possible chiral effects in the gravitational field.

  9. PWR decontamination feasibility study

    International Nuclear Information System (INIS)

    Silliman, P.L.

    1978-01-01

    The decontamination work which has been accomplished is reviewed and it is concluded that it is worthwhile to investigate further four methods for decontamination for future demonstration. These are: dilute chemical; single stage strong chemical; redox processes; and redox/chemical in combination. Laboratory work is recommended to define the agents and processes for demonstration and to determine the effect of the solvents on PWR materials. The feasibility of Indian Point 1 for decontamination demonstrations is discussed, and it is shown that the system components of Indian Point 1 are well suited for use in demonstrations

  10. Sault Tribe Wind Energy Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Toni Osterhout; Global Energy Concepts

    2005-07-31

    The Sault Tribe conducted a feasibility study on tribal lands in the Upper Peninsula of Michigan to determine the technical and economic feasibility of both small and large-scale wind power development on tribal lands. The study included a wind resource assessment, transmission system analysis, engineering and regulatory analyzes and assessments.

  11. Disposal project for LLW and VLLW generated from research facilities in Japan: A feasibility study for the near surface disposal of VLLW that includes uranium

    International Nuclear Information System (INIS)

    Sakai, Akihiro; Hasegawa, M.; Sakamoto, Y.; Nakatani, T.

    2016-01-01

    Conclusion and future work: • JAEA plans trench disposal of U-bearing waste with less than 100 Bq/g. • Two safety measures of trench disposal of U-bearing waste have been discussed taking into account increasing radioactivity over a long period of time. 1. First is to carry out dose assessment of site use scenario by using a conservatively stylized condition. 2. Second is to control the average concentration of U in the trench facilities based on the concept of the existing exposure situation. • We are continuously developing the method for safety measures of near surface disposal of VLLW including U-bearing waste.

  12. Tribal Utility Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Engel, R. A.; Zoellick, J. J.

    2007-06-30

    The Schatz Energy Research Center (SERC) assisted the Yurok Tribe in investigating the feasibility of creating a permanent energy services program for the Tribe. The original purpose of the DOE grant that funded this project was to determine the feasibility of creating a full-blown Yurok Tribal electric utility to buy and sell electric power and own and maintain all electric power infrastructure on the Reservation. The original project consultant found this opportunity to be infeasible for the Tribe. When SERC took over as project consultant, we took a different approach. We explored opportunities for the Tribe to develop its own renewable energy resources for use on the Reservation and/or off-Reservation sales as a means of generating revenue for the Tribe. We also looked at ways the Tribe can provide energy services to its members and how to fund such efforts. We identified opportunities for the development of renewable energy resources and energy services on the Yurok Reservation that fall into five basic categories: • Demand-side management – This refers to efforts to reduce energy use through energy efficiency and conservation measures. • Off-grid, facility and household scale renewable energy systems – These systems can provide electricity to individual homes and Tribal facilities in areas of the Reservation that do not currently have access to the electric utility grid. • Village scale, micro-grid renewable energy systems - These are larger scale systems that can provide electricity to interconnected groups of homes and Tribal facilities in areas of the Reservation that do not have access to the conventional electric grid. This will require the development of miniature electric grids to serve these interconnected facilities. • Medium to large scale renewable energy development for sale to the grid – In areas where viable renewable energy resources exist and there is access to the conventional electric utility grid, these resources can be

  13. Flathead Renewable Energy Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Belvin Pete: Ed McCarthy; Krista Gordon; Chris Bergen; Rhett Good

    2006-10-03

    The study shall assess the feasibility of a commercial wind facility on lands selected and owned by the Salish and Kootenai Tribes and shall examine the potential for the development of solar and biomass resources located on Tribal Lands.

  14. West Valley feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Pirro, J.

    1981-01-01

    This report presents the results of a technical assessment of decontamination alternative prepared for the Western New York Nuclear Service Center (WNYNSC). The purpose of the assessment is to determine the recommended method for decontamination of cell surfaces and decontamination and removal of fuel reprocessing cell equipment to permit manual entry into the cells for the installation of waste solidification equipment. The primary cells of interest are the PMC, GPC, and CPC because they offer the largest usable volume for the solidification program. The secondary cells include XC-1, XC-2, XC-3 and the PPC which may be needed to support the solidification program. Five decontamination assessments were evaluated (A-E). The assessments included the estimated cost, occupational exposure, duration, manpower, waste volume generated, and final cell radiation levels achieved with the alternative decontamination methods. The methods varied from thorough destructive decontamination to equipment removal without decontamination followed by cell wall and floor decontamination. The recommended method for the primary cells is to utilize the remote manipulators and cranes to the maximum extent possible to decontaminate equipment and cell surfaces remotely, and to remove the equipment for temporary on-site storage. The recommended method for secondary cell decontamination is to remotely decontaminate the cells to the maximum extent possible prior to manned entry for contact-removal of the fuel reprocessing equipment (Assessment D). Assessment A is expected to cost $8,713,500 in 1980 dollars (including a 25% contingency) and will result in an occupational exposure of 180.3 manRem. Assessment D is expected to cost $11,039,800 and will result in an occupational exposure of 259 manRems.

  15. Ecological Feasibility Studies in Restoration Decision Making

    Science.gov (United States)

    Hopfensperger, Kristine N.; Engelhardt, Katharina A. M.; Seagle, Steven W.

    2007-06-01

    The restoration of degraded systems is essential for maintaining the provision of valuable ecosystem services, including the maintenance of aesthetic values. However, restoration projects often fail to reach desired goals for a variety of ecologic, financial, and social reasons. Feasibility studies that evaluate whether a restoration effort should even be attempted can enhance restoration success by highlighting potential pitfalls and gaps in knowledge before the design phase of a restoration. Feasibility studies also can bring stakeholders together before a restoration project is designed to discuss potential disagreements. For these reasons, a feasibility study was conducted to evaluate the efficacy of restoring a tidal freshwater marsh in the Potomac River near Alexandria, Virginia. The study focused on science rather than engineering questions, and thus differed in approach from other feasibility studies that are mostly engineering driven. The authors report the framework they used to conduct a feasibility study to inform other potential restoration projects with similar goals. The seven steps of the framework encompass (1) initiation of a feasibility study, (2) compilation of existing data, (3) collection of current site information, (4) examination of case studies, (5) synthesis of information in a handbook, (6) meeting with selected stakeholders, and (7) evaluation of meeting outcomes. By conducting a feasibility study using the seven-step framework, the authors set the stage for conducting future compliance studies and enhancing the chance of a successful restoration.

  16. IPNS upgrade: A feasibility study

    International Nuclear Information System (INIS)

    1995-04-01

    Many of Argonne National Laboratory's (ANL's) scientific staff members were very active in R ampersand D work related to accelerator-based spoliation sources in the 1970s and early 1980s. In 1984, the Seitz/Eastman Panel of the National Academy of Sciences reviewed U.S. materials science research facilities. One of the recommendations of this panel was that the United States build a reactor-based steady-state source, the Advanced Neutron Source (ANS), at Oak Ridge National Laboratory. Subsequently, R ampersand D activities related to the design of an accelerator-based source assumed a lower priority. The resumption of pulsed-source studies in this country started simultaneously with design activities in Europe aimed at the European Spallation Source (ESS). The European Community funded a workshop in September 1991 to define the parameters of the ESS. Participants in this workshop included both accelerator builders and neutron source users. A consortium of European countries has proposed to build a 5-MW pulsed source, and a feasibility study is currently under way. Soon after the birth of the ESS, a small group at ANL set about bringing themselves up to date on pulsed-source information since 1984 and studied the feasibility of upgrading ANL's Intense Pulsed Neutron Source (IPNS) to 1 MW by means of a rapidly cycling synchrotron that could be housed, along with its support facilities, in existing buildings. In early 1993, the Kohn panel recommended that (1) design and construction of the ANS should be completed according to the proposed project schedule and (2) development of competitive proposals for cost-effective design and construction of a 1-MW pulsed spallation source should be authorized immediately

  17. IPNS upgrade: A feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    Many of Argonne National Laboratory`s (ANL`s) scientific staff members were very active in R&D work related to accelerator-based spoliation sources in the 1970s and early 1980s. In 1984, the Seitz/Eastman Panel of the National Academy of Sciences reviewed U.S. materials science research facilities. One of the recommendations of this panel was that the United States build a reactor-based steady-state source, the Advanced Neutron Source (ANS), at Oak Ridge National Laboratory. Subsequently, R&D activities related to the design of an accelerator-based source assumed a lower priority. The resumption of pulsed-source studies in this country started simultaneously with design activities in Europe aimed at the European Spallation Source (ESS). The European Community funded a workshop in September 1991 to define the parameters of the ESS. Participants in this workshop included both accelerator builders and neutron source users. A consortium of European countries has proposed to build a 5-MW pulsed source, and a feasibility study is currently under way. Soon after the birth of the ESS, a small group at ANL set about bringing themselves up to date on pulsed-source information since 1984 and studied the feasibility of upgrading ANL`s Intense Pulsed Neutron Source (IPNS) to 1 MW by means of a rapidly cycling synchrotron that could be housed, along with its support facilities, in existing buildings. In early 1993, the Kohn panel recommended that (1) design and construction of the ANS should be completed according to the proposed project schedule and (2) development of competitive proposals for cost-effective design and construction of a 1-MW pulsed spallation source should be authorized immediately.

  18. General discussion of feasibility study

    International Nuclear Information System (INIS)

    Calori, F.

    1976-01-01

    Fundamentals, objectives and parameters of feasibility studies in the field of nuclear power project planning are discussed in a general way. Technical and economic problems to be considered are pointed out. In special cases, IAEA offers its aid and support. (UA) [de

  19. Conducting pilot and feasibility studies.

    Science.gov (United States)

    Cope, Diane G

    2015-03-01

    Planning a well-designed research study can be tedious and laborious work. However, this process is critical and ultimately can produce valid, reliable study findings. Designing a large-scale randomized, controlled trial (RCT)-the gold standard in quantitative research-can be even more challenging. Even the most well-planned study potentially can result in issues with research procedures and design, such as recruitment, retention, or methodology. One strategy that may facilitate sound study design is the completion of a pilot or feasibility study prior to the initiation of a larger-scale trial. This article will discuss pilot and feasibility studies, their advantages and disadvantages, and implications for oncology nursing research. 
.

  20. Feasibility Study on HYSOL CSP

    DEFF Research Database (Denmark)

    Nielsen, Lars Henrik; Baldini, Mattia; Skytte, Klaus

    2016-01-01

    integrated HYSOL concept, therefore, becomes a fully dispatchable (offering firm power) and fully renewable energy source (RES) based power supply alternative, offering CO2-free electricity in regions with sufficient solar resources. The economic feasibility of HYSOL configurations is addressed in this paper...... salt can be stored and the stored heat can thus increase the load factor and the usability for a CSP plant, e.g. to cover evening peak demand. In the HYSOL concept (HYbrid SOLar) such configuration is extended further to include a gas turbine fuelled by upgraded biogas or natural gas. The optimised....... The CO2 free HYSOL alternative is discussed relative to conventional reference firm power generation technologies. In particular the HYSOL performance relative to new power plants based on natural gas (NG) such as open cycle or combined cycle gas turbines (OCGT or CCGT) are in focus. The feasibility...

  1. WERF MACT Feasibility Study Report

    Energy Technology Data Exchange (ETDEWEB)

    B. Bonnema; D. Moser; J. Riedesel; K. Kooda; K. Liekhus; K. Rebish; S. Poling

    1998-11-01

    This study was undertaken to determine the technical feasibility of upgrading the Waste Experimental Reduction Facility (WERF) at the Idaho National Engineering and Environmental Laboratory to meet the offgas emission limits proposed in the Maximum Achievable Control Technologies (MACT)rule. Four practicable offgas treatment processes were identified, which, if installed, would enable the WERF to meet the anticipated MACT emission limits for dioxins and furans (D/F), hydrochloric acid (HCI), and mercury (Hg). Due to the three-year time restraint for MACT compliance, any technology chosen for the upgrade must be performed within the general plant project funding limit of $5 M. The option selected consists of a partial-quench evaporative cooler with dry sorbent injection for HCI removal followed by a sulfur-impregnated activated carbon bed for Hg control. The planning cost estimate for implementing the option is $4.17 M (with 24% contingency). The total estimated cost includes capital costs, design and construction costs, and project management costs. Capital costs include the purchase of a new offgas evaporative cooler, a dry sorbent injection system with reagent storage, a new fabric filter baghouse, a fixed carbon bed absorber, and two offgas induced draft exhaust fans. It is estimated that 21 months will be required to complete the recommended modification to the WERF. The partial-quench cooler is designed to rapidly cool the offgas exiting the secondary combustion chamber to minimize D/F formation. Dry sorbent injection of an alkali reagent into the offgas is recommended. The alkali reacts with the HCI to form a salt, which is captured with the fly ash in the baghouse. A design HCI removal efficiency of 97.2% allows for the feeding 20 lbs/hr of chlorine to the WERF incinerator. The sorbent feed rate can be adjusted to achieve the desired HCI removal efficiency. A fixed bed of sulfur-impregnated carbon was conservatively sized for a total Hg removal capacity when

  2. DPC loading feasibility study report

    Energy Technology Data Exchange (ETDEWEB)

    Dafoe, R.E.; Lopez, D.A.; Williams, K.L.

    1997-11-01

    Disposal of radioactive wastes now stored at the Idaho Chemical Processing Plant at the Idaho National Engineering and Environmental Laboratory is mandated under a ``Settlement Agreement`` between the Department of Energy and the State of Idaho. This study investigates the feasibility of using the Dry Transfer Cell facility to package waste into Dual Purpose Canisters for interim storage at the adjacent Dry Storage System comprised of an interim storage pad with NUHOMS{reg_sign} storage modules. The wastes would then be road-ready for eventual disposal in a permanent repository. The operating period for these activities is expected to be from 2015 to 2035.

  3. Dual-Doppler Feasibility Study

    Science.gov (United States)

    Huddleston, Lisa L.

    2012-01-01

    When two or more Doppler weather radar systems are monitoring the same region, the Doppler velocities can be combined to form a three-dimensional (3-D) wind vector field thus providing for a more intuitive analysis of the wind field. A real-time display of the 3-D winds can assist forecasters in predicting the onset of convection and severe weather. The data can also be used to initialize local numerical weather prediction models. Two operational Doppler Radar systems are in the vicinity of Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS); these systems are operated by the 45th Space Wing (45 SW) and the National Weather Service Melbourne, Fla. (NWS MLB). Dual-Doppler applications were considered by the 45 SW in choosing the site for the new radar. Accordingly, the 45th Weather Squadron (45 WS), NWS MLB and the National Aeronautics and Space Administration tasked the Applied Meteorology Unit (AMU) to investigate the feasibility of establishing dual-Doppler capability using the two existing systems. This study investigated technical, hardware, and software requirements necessary to enable the establishment of a dual-Doppler capability. Review of the available literature pertaining to the dual-Doppler technique and consultation with experts revealed that the physical locations and resulting beam crossing angles of the 45 SW and NWS MLB radars make them ideally suited for a dual-Doppler capability. The dual-Doppler equations were derived to facilitate complete understanding of dual-Doppler synthesis; to determine the technical information requirements; and to determine the components of wind velocity from the equation of continuity and radial velocity data collected by the two Doppler radars. Analysis confirmed the suitability of the existing systems to provide the desired capability. In addition, it is possible that both 45 SW radar data and Terminal Doppler Weather Radar data from Orlando International Airport could be used to alleviate any

  4. PV solar system feasibility study

    International Nuclear Information System (INIS)

    Ashhab, Moh’d Sami S.; Kaylani, Hazem; Abdallah, Abdallah

    2013-01-01

    Highlights: ► This research studies the feasibility of PV solar systems. ► The aim is to develop the theory and application of a hybrid system. ► Relevant research topics are reviewed and some of them are discussed in details. ► A prototype of the PV solar system is designed and built. - Abstract: This research studies the feasibility of PV solar systems and aims at developing the theory and application of a hybrid system that utilizes PV solar system and another supporting source of energy to provide affordable heating and air conditioning. Relevant research topics are reviewed and some of them are discussed in details. Solar heating and air conditioning research and technology exist in many developed countries. To date, the used solar energy has been proved to be inefficient. Solar energy is an abundant source of energy in Jordan and the Middle East; with increasing prices of oil this source is becoming more attractive alternative. A good candidate for the other system is absorption. The overall system is designed such that it utilizes solar energy as a main source. When the solar energy becomes insufficient, electricity or diesel source kicks in. A prototype of the PV solar system that operates an air conditioning unit is built and proper measurements are collected through a data logging system. The measured data are plotted and discussed, and conclusions regarding the system performance are extracted.

  5. A cask maintenance facility feasibility study

    International Nuclear Information System (INIS)

    Rennich, M.J.; Medley, L.G.; Attaway, C.R.

    1989-01-01

    The Oak Ridge National Laboratory (ORNL) is developing a transportation system for spent nuclear fuel (SNF) and defense high level waste (HLW) as a part of the Federal Waste Management System (FWMS). In early 1988, a feasibility study was undertaken to design a stand-alone, ''green field'' facility for maintaining the FWMS casks. The feasibility study provided an initial layout facility design, an estimate of the construction cost, and an acquisition schedule for a Cask Maintenance Facility (CMF). The study also helped to define the interfaces between the transportation system and the waste generators, the repository, and a Monitored Retrievable Storage (MRS) facility. The data, design, and estimated costs resulting from the study have been organized for use in the total transportation system decision-making process. Most importantly, the feasibility study also provides a foundation for continuing design and planning efforts. Fleet servicing facility studies, operational studies from current cask system operators, a definition of the CMF system requirements, and the experience of others in the radioactive waste transportation field were used as a basis for the feasibility study. In addition, several cask handling facilities were visited to observe and discuss cask operations to establish the functions and methods of cask maintenance expected to be used in the facility. Finally, a peer review meeting was held at Oak Ridge, Tennessee in August, 1988, in which the assumptions, design, layout, and functions of the CMF were significantly refined. Attendees included representatives from industry, the repository and transportation operations

  6. Renewable Energy Feasibility Study Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Rooney, Tim [Antares Group Inc.

    2013-10-30

    The Gila River Indian Community (GRIC or the Community) contracted the ANTARES Group, Inc. (“ANTARES”) to assess the feasibility of solar photovoltaic (PV) installations. A solar energy project could provide a number of benefits to the Community in terms of potential future energy savings, increased employment, environmental benefits from renewable energy generation and usage, and increased energy self-sufficiency. The study addresses a number of facets of a solar project’s overall feasibility, including: Technical appropriateness; Solar resource characteristics and expected system performance; Levelized cost of electricity (LCOE) economic assessment. The Gila River Indian Community (GRIC or the Community) contracted the ANTARES Group, Inc. (“ANTARES”) to prepare a biomass resource assessment study and evaluate the feasibility of a bioenergy project on Community land. A biomass project could provide a number of benefits to the Community in terms of increased employment, environmental benefits from renewable energy generation and usage, and increased energy self-sufficiency. The study addresses a number of facets of a biomass project’s overall feasibility, including: Resource analysis and costs; Identification of potential bioenergy projects; Technical and economic (levelized cost of energy) modeling for selected project configuration.

  7. MRS transfer facility feasibility study

    International Nuclear Information System (INIS)

    Jowdy, A.K.; Smith, R.I.

    1990-12-01

    Under contract to the US Department of Energy, Parsons was requested to evaluate the feasibility of building a simple hot cell (waste handling) transfer facility at the Monitored Retrievable Storage (MRS) site to facilitate acceptance of spent fuel into the Federal Waste Management System starting in early 1998. The Transfer Facility was intended to provide a receiving and transfer to storage capability at a relatively low throughput rate (approximately 500 MTU/yr) and to provide the recovery capability needed on the site in the event of a transport or storage cask seal failure during a period of about two years while the larger Spent Fuel Handling Building (SFHB) was being completed. Although the original study basis postulated an incremental addition to the larger, previously considered MRS configurations, study results show that the Transfer Facility may be capable of receiving and storing spent fuel at annual rates of 3000 MTU/yr or more, making a larger fuel handling structure unnecessary. In addition, the study analyses showed that the Transfer Facility could be constructed and put into service in 15--17 months and would cost less than the previous configurations. 2 figs., 2 tabs

  8. Muon muon collider: Feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-18

    A feasibility study is presented of a 2 + 2 TeV muon collider with a luminosity of L = 10{sup 35} cm{sup {minus}2} s{sup {minus}1}. The resulting design is not optimized for performance, and certainly not for cost; however, it does suffice--the authors believe--to allow them to make a credible case, that a muon collider is a serious possibility for particle physics and, therefore, worthy of R and D support so that the reality of, and interest in, a muon collider can be better assayed. The goal of this support would be to completely assess the physics potential and to evaluate the cost and development of the necessary technology. The muon collider complex consists of components which first produce copious pions, then capture the pions and the resulting muons from their decay; this is followed by an ionization cooling channel to reduce the longitudinal and transverse emittance of the muon beam. The next stage is to accelerate the muons and, finally, inject them into a collider ring which has a small beta function at the colliding point. This is the first attempt at a point design and it will require further study and optimization. Experimental work will be needed to verify the validity of diverse crucial elements in the design.

  9. Multnomah County Hydrokinetic Feasibility Study: Final Feasibility Study Report

    Energy Technology Data Exchange (ETDEWEB)

    Spain, Stephen

    2012-03-15

    HDR has completed a study of the technical, regulatory, and economic feasibility of installing hydrokinetic turbines under the Morrison, Broadway, and Sellwood bridges. The primary objective of installing hydrokinetic turbines is a demonstration of in-stream hydrokinetic technologies for public education and outreach. Due to the low gradient of the Lower Willamette and the effects of the tide, velocities in the area in consideration are simply not high enough to economically support a commercial installation. While the velocities in the river may at times provide enough energy for a commercial turbine to reach capacity, the frequency and duration of high flow events which provide suitable velocities is not sufficient to support a commercial hydrokinetic installation. We have observed that over an 11 year period, daily average velocities in the Lower Willamette exceeded a nominal cut-in speed of 0.75 m/s only 20% of the time, leaving net zero power production for the remaining 80% of days. The Sellwood Bridge site was estimated to have the best hydrokinetic resource, with an estimated average annual production of about 9,000 kWh. The estimated production could range from 2,500 kWh to 15,000 kWh. Based on these energy estimates, the amount of revenue generated through either a power purchase agreement (PPA) or recovered through net metering is not sufficient to repay the project costs within the life of the turbine. The hydrokinetic resource at the Morrison and Broadway Bridges is slightly smaller than at the Sellwood Bridge. While the Broadway and Morrison Bridges have existing infrastructure that could be utilized, the project is not expected to generate enough revenue to repay the investment. Despite low velocities and energy production, the sites themselves are favorable for installation of a demonstration or experimental project. With high public interest in renewable energy, the possibility exists to develop a hydrokinetic test site which could provide

  10. Muon Muon Collider: Feasibility Study

    International Nuclear Information System (INIS)

    2012-01-01

    A feasibility study is presented of a 2 + 2 TeV muon collider with a luminosity of L = 10 35 cm -2 s -1 . The resulting design is not optimized for performance, and certainly not for cost; however, it does suffice - we believe - to allow us to make a credible case, that a muon collider is a serious possibility for particle physics and, therefore, worthy of R and D support so that the reality of, and interest in, a muon collider can be better assayed. The goal of this support would be to completely assess the physics potential and to evaluate the cost and development of the necessary technology. The muon collider complex consists of components which first produce copious pions, then capture the pions and the resulting muons from their decay; this is followed by an ionization cooling channel to reduce the longitudinal and transverse emittance of the muon beam. The next stage is to accelerate the muons and, finally, inject them into a collider ring wich has a small beta function at the colliding point. This is the first attempt at a point design and it will require further study and optimization. Experimental work will be needed to verify the validity of diverse crucial elements in the design. Muons because of their large mass compared to an electron, do not produce significant synchrotron radiation. As a result there is negligible beamstrahlung and high energy collisions are not limited by this phenomena. In addition, muons can be accelerated in circular devices which will be considerably smaller than two full-energy linacs as required in an e + - e - collider. A hadron collider would require a CM energy 5 to 10 times higher than 4 TeV to have an equivalent energy reach. Since the accelerator size is limited by the strength of bending magnets, the hadron collider for the same physics reach would have to be much larger than the muon collider. In addition, muon collisions should be cleaner than hadron collisions. There are many detailed particle reactions which are

  11. Muon Muon Collider: Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Gallardo, J.C.; Palmer, R.B.; /Brookhaven; Tollestrup, A.V.; /Fermilab; Sessler, A.M.; /LBL, Berkeley; Skrinsky, A.N.; /Novosibirsk, IYF; Ankenbrandt, C.; Geer, S.; Griffin, J.; Johnstone, C.; Lebrun, P.; McInturff, A.; Mills, Frederick E.; Mokhov, N.; Moretti, A.; Neuffer, D.; Ng, K.Y.; Noble, R.; Novitski, I.; Popovic, M.; Qian, C.; Van Ginneken, A. /Fermilab /Brookhaven /Wisconsin U., Madison /Tel Aviv U. /Indiana U. /UCLA /LBL, Berkeley /SLAC /Argonne /Sobolev IM, Novosibirsk /UC, Davis /Munich, Tech. U. /Virginia U. /KEK, Tsukuba /DESY /Novosibirsk, IYF /Jefferson Lab /Mississippi U. /SUNY, Stony Brook /MIT /Columbia U. /Fairfield U. /UC, Berkeley

    2012-04-05

    A feasibility study is presented of a 2 + 2 TeV muon collider with a luminosity of L = 10{sup 35} cm{sup -2}s{sup -1}. The resulting design is not optimized for performance, and certainly not for cost; however, it does suffice - we believe - to allow us to make a credible case, that a muon collider is a serious possibility for particle physics and, therefore, worthy of R and D support so that the reality of, and interest in, a muon collider can be better assayed. The goal of this support would be to completely assess the physics potential and to evaluate the cost and development of the necessary technology. The muon collider complex consists of components which first produce copious pions, then capture the pions and the resulting muons from their decay; this is followed by an ionization cooling channel to reduce the longitudinal and transverse emittance of the muon beam. The next stage is to accelerate the muons and, finally, inject them into a collider ring wich has a small beta function at the colliding point. This is the first attempt at a point design and it will require further study and optimization. Experimental work will be needed to verify the validity of diverse crucial elements in the design. Muons because of their large mass compared to an electron, do not produce significant synchrotron radiation. As a result there is negligible beamstrahlung and high energy collisions are not limited by this phenomena. In addition, muons can be accelerated in circular devices which will be considerably smaller than two full-energy linacs as required in an e{sup +} - e{sup -} collider. A hadron collider would require a CM energy 5 to 10 times higher than 4 TeV to have an equivalent energy reach. Since the accelerator size is limited by the strength of bending magnets, the hadron collider for the same physics reach would have to be much larger than the muon collider. In addition, muon collisions should be cleaner than hadron collisions. There are many detailed particle

  12. A Feasibility study of a mining business

    Directory of Open Access Journals (Sweden)

    Cehlár Michal

    2001-06-01

    Full Text Available The economic evaluation of a project requires a great deal of diverse information to be brought together in one place. The greatest concern is that there will be an error by omission, so it is useful to have a detailed list of what one needs to know in order to make a thorough evaluation.There are various of detail required at the different stages of evaluation in the project, from the "quick and dirty" overview to the pre-feasibility study, through a full detailed feasibility study, to a due diligence review. This list addresses most of the economic variables in project and can be used at all levels of studies. Its purpose is to identify a variable or issue and to raise a question, which the review can pursue in more detail using an increasingly more comprehensive checklist for each topic. While developed from the point of view of a new project, this list is equally valid for an ongoing operation.A feasibility study is defined as an assessment of all aspects of a project including technical, infrastructural, environmental, social, legislative and commercial factors, which is sufficiently detailed to support a decision on the implementation. Each project has an associated level of risk. For a proposed investment to increase the value of a firm's stock, it should have a higher expected rate of return than shareholders require for assuming that risk. Since investors demand for a higher potential returns from a riskier project, the cost of capital depends on the venture's risk.

  13. Lunar Wireless Power Transfer Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Freid, Sheldon [National Security Technologies, LLC. (NSTec), Mercury, NV (United States); Popovic, Zoya [Univ. of Colorado, Boulder, CO (United States); Beckett, David R. [Independent Consultant; Anderson, Scott R. [Independent Consultant; Mann, Diana [Independent Consultant; Walker, Stuart [Independent Consultant

    2008-03-01

    This study examines the feasibility of a multi-kilowatt wireless radio frequency (RF) power system to transfer power between lunar base facilities. Initial analyses, show that wireless power transfer (WPT) systems can be more efficient and less expensive than traditional wired approaches for certain lunar and terrestrial applications. The study includes evaluations of the fundamental limitations of lunar WPT systems, the interrelationships of possible operational parameters, and a baseline design approach for a notionial system that could be used in the near future to power remote facilities at a lunar base. Our notional system includes state-of-the-art photovoltaics (PVs), high-efficiency microwave transmitters, low-mass large-aperture high-power transmit antennas, high-efficiency large-area rectenna receiving arrays, and reconfigurable DC combining circuitry.

  14. Canton hydroelectric project: feasibility study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-01

    The Canton Hydroelectric Project study was undertaken to determine the feasibility of redeveloping hydroelectric power generation facilities at the Upper and Lower Dams on the Farmington River at Collinsville, CT. The integrity of the existing dams and power plants was investigated and found to be generally adequate. The intake channels, powerhouses and tailraces will require refurbishing but no major repairs. The Lower Dam will require some repair to correct surface deterioration conditions. New flashboard installations are contemplated for both the dams. Energy production operational studies were performed on 25 generating unit alternatives for the two sites. Detailed cost estimates were prepared for seven Upper and five Lower site alternatives, and a detailed economic analysis of ten project alternatives was performed. The economic analysis included 3 power marketing options and the future escalation of the value of energy. The conclusions of this study were: the project is economically feasible on a 40-y life cycle basis; short-term financing, bond payment adjustments, or other special financial arrangements will be needed to provide for the negative cash flow during the early years of operation; and the Town of Canton should further pursue the power marketing and financing aspects of the project. (LCL)

  15. Battery energy storage market feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Kraft, S. [Frost and Sullivan, Mountain View, CA (United States); Akhil, A. [Sandia National Labs., Albuquerque, NM (United States). Energy Storage Systems Analysis and Development Dept.

    1997-07-01

    Under the sponsorship of the Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed energy storage as an important enabling technology to enable increased use of renewable energy and as a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).

  16. Battery energy storage market feasibility study

    International Nuclear Information System (INIS)

    Kraft, S.; Akhil, A.

    1997-07-01

    Under the sponsorship of the Department of Energy's Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed energy storage as an important enabling technology to enable increased use of renewable energy and as a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1)

  17. Three Affliated Tribes Renewable Energy Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Belvin Pete; Kent Good; Krista Gordon; Ed McCarthy,

    2006-05-26

    The Three Affliated Tribes on the Fort Berthold Reservation studied the feasibility of a commercial wind facility on land selected and owned by the Tribes and examined the potential for the development of renewable energy resources on Tribal Lands.

  18. A Study to Determine the Feasibility of Including the Direct Experiences of Microteaching and Team Teaching, and Interaction Analysis Training in the Pre-Service Training of Foreign Language Teachers.

    Science.gov (United States)

    Wolfe, David Edwin

    This study examines potentially significant factors in the training of foreign language teachers. Remarks on microteaching and interaction analysis precede a review and analysis of related literature. Included in this section are the Stanford University Summer Intern Program, Amidon's model of microteaching and interaction analysis, and…

  19. Feasibility Study for Paragon - Bisti Solar Ranch

    Energy Technology Data Exchange (ETDEWEB)

    Benally, Thomas [Navajo Hopi Land Commission Office (NHLCO), Window Rock, AZ (United States)

    2015-06-01

    The Navajo Hopi Land Commission Office (NHLCO) and Navajo Nation (NN) plan to develop renewable energy (RE) projects on the Paragon-Bisti Ranch (PBR) lands, set aside under the Navajo Hopi Land Settlement Act (NHLSA) for the benefit of Relocatees. This feasibility study (FS), which was funded under a grant from DOE’s Tribal Energy Program (TEP), was prepared in order to explore the development of the 22,000-acre PBR in northwestern New Mexico for solar energy facilities. Topics covered include: • Site Selection • Analysis of RE, and a Preliminary Design • Transmission, Interconnection Concerns and Export Markets • Financial and Economic Analysis • Environmental Study • Socioeconomic and Cultural Factors • Next Steps.

  20. White Earth Biomass/Biogas Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Triplett, Michael

    2015-03-12

    The White Earth Nation examined the feasibility of cost savings and fossil energy reduction through the installation of biogas/biomass boiler at the tribal casino. The study rejected biogas options due to availability and site constraints, but found a favorable environment for technical and financial feasibility of installing a 5 MMBtu hot water boiler system to offset 60-70 percent of current fuel oil and propane usage.

  1. Feasibility Study on HYSOL CSP

    DEFF Research Database (Denmark)

    Nielsen, Lars Henrik; Skytte, Klaus; Pérez, Cristian Hernán Cabrera

    2016-01-01

    Concentrating Solar Power (CSP) plants utilize thermal conversion of direct solar irradiation. A trough or tower configuration focuses solar radiation and heats up oil or molten salt that subsequently in high temperature heat exchangers generate steam for power generation. High temperature molten...... salt can be stored and the stored heat can thus increase the load factor and the usability for a CSP plant, e.g. to cover evening peak demand. In the HYSOL concept (HYbrid SOLar) such configuration is extended further to include a gas turbine fuelled by upgraded biogas or natural gas. The optimised...

  2. BNCT with linac, feasibility study

    International Nuclear Information System (INIS)

    Alfuraih, A.; Ma, A.; Spyrou, N.M.; Awotwi-Pratt, Joseph

    2006-01-01

    High energy photon beams from Medical Linear Accelerators (linacs) which are used in radiotherapy produce undesirable neutrons, beside the clinically useful electron and photon beams. Neutrons are produced from the photonuclear reaction (γ,n) of high energy photons with high Z-materials which compose the accelerator head. In this paper the possible use of these undesirable neutrons for BNCT is investigated, making use of high energy linacs already installed in hospitals, primarily for high energy electron and photon therapy and applying them in the context of BNCT. The photoneutron components emitted by the accelerator is the source for Monte Carlo simulations of the interactions that take place within the head of a voxel-based phantom. The neutron flux across the phantom head is calculated using different moderator arrangements and different techniques in the aim of increasing the thermal neutron flux at the targeted site. Also, we shall test different configurations of the linac head to maximize the exposure of high-Z materials to the photon beam, including the removal of the flattening filter, so as to boost the photoneutron production in the linac head. Experimental work will be conducted in hospitals to validate the Monte Carlo simulations. To make use of linacs for BNCT will be advantageous in the sense that the setting in a hospital department is much more acceptable by the public than a reactor installation. This will mean less complications regarding patient positioning and movement with respect to the beams, additional patient transportation and management will be more cost effective. (author)

  3. River Wyre preliminary feasibility study

    International Nuclear Information System (INIS)

    1991-01-01

    A study undertaken in 1987 for the Department of Energy, of small estuaries and embayments around the coast of the United Kingdom, identified the Wyre as one of the most promising sites for the construction of a small tidal power barrage. Enquiries showed that Organisations with interests in and around the Wyre had carried out extensive surveys and investigations into the physical and environmental aspects of the estuary, many of which would be relevant to the development of a tidal power scheme. It was identified that a barrage constructed on the Wyre, in addition to generating clean renewable energy may also act as a road crossing between Fleetwood and Over Wyre, thereby avoiding the present diversion via the Shard Toll Bridge located some 8km upstream of the town of Fleetwood. (Author)

  4. Exoskeleton for Soldier Enhancement Systems Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Jansen, J.F.

    2000-09-28

    The development of a successful exoskeleton for human performance augmentation (EHPA) will require a multi-disciplinary systems approach based upon sound biomechanics, power generation and actuation systems, controls technology, and operator interfaces. The ability to integrate key components into a system that enhances performance without impeding operator mobility is essential. The purpose of this study and report are to address the issue of feasibility of building a fieldable EHPA. Previous efforts, while demonstrating progress and enhancing knowledge, have not approached the level required for a fully functional, fieldable system. It is doubtless that the technologies required for a successful exoskeleton have advanced, and some of them significantly. The question to be addressed in this report is have they advanced to the point of making a system feasible in the next three to five years? In this study, the key technologies required to successfully build an exoskeleton have been examined. The primary focus has been on the key technologies of power sources, actuators, and controls. Power sources, including internal combustion engines, fuel cells, batteries, super capacitors, and hybrid sources have been investigated and compared with respect to the exoskeleton application. Both conventional and non-conventional actuator technologies that could impact EHPA have been assessed. In addition to the current state of the art of actuators, the potential for near-term improvements using non-conventional actuators has also been addressed. Controls strategies, and their implication to the design approach, and the exoskeleton to soldier interface have also been investigated. In addition to these key subsystems and technologies, this report addresses technical concepts and issues relating to an integrated design. A recommended approach, based on the results of the study is also presented.

  5. Viscosity Control Experiment Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Morris, Heidi E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bradley, Paul Andrew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-01-31

    Turbulent mix has been invoked to explain many results in Inertial Confinement Fusion (ICF) and High Energy Density (HED) physics, such as reduced yield in capsule implosions. Many ICF capsule implosions exhibit interfacial instabilities seeded by the drive shock, but it is not clear that fully developed turbulence results from this. Many simulations use turbulent mix models to help match simulation results to data, but this is not appropriate if turbulence is not present. It would be useful to have an experiment where turbulent mixing could be turned on or off by design. The use of high-Z dopants to modify viscosity and the resulting influence on turbulence is considered here. A complicating factor is that the plasma in some implosions can become strongly coupled, which makes the Spitzer expression for viscosity invalid. We first consider equations that cover a broad parameter space in temperature and density to address regimes for various experimental applications. Next, a previous shock-tube and other ICF experiments that investigate viscosity or use doping to examine the effects on yield are reviewed. How viscosity and dopants play a role in capsule yield depends on the region and process under consideration. Experiments and simulations have been performed to study the effects of viscosity on both the hot spot and the fuel/ablator mix. Increases in yield have been seen for some designs, but not all. We then discuss the effect of adding krypton dopant to the gas region of a typical OMEGA and a 2-shock NIF implosion to determine approximately the effect of adding dopant on the computed Reynolds number. Recommendations for a path forward for possible experiments using high-Z dopants to affect viscosity and turbulence are made.

  6. A cask maintenance facility feasibility study

    International Nuclear Information System (INIS)

    Rennich, M.J.; Medley, L.G.; Attaway, C.R.

    1989-01-01

    The Oak Ridge National Laboratory (ORNL) is supporting the USDOE Office of Civilian Radioactive Waste Management (OCRWM) in developing a transportation system for spent nuclear fuel (SNF) and defense high level waste (HLW) as a part of the Federal Waste Management System (FWMS). In early 1988, a feasibility study was undertaken to design a stand-alone, green field facility for maintaining the FWMS casks. The feasibility study provided an initial layout facility design, an estimate of the construction cost, and an acquisition schedule for a Cask Maintenance Facility (CMF). The study also helped to define the interfaces between the transportation system and the waste generators, the repository, and a Monitored Retrieveable Storage (MRS) facility. The data, design, and estimated cost resulting from the study have been organized for use in the total transportation system decision-making process. Most importantly, the feasibility study also provides a foundation for continuing design and planning efforts. The feasibility study was based on an assumed stand-alone green field configuration because of the flexibility this design approach provides. A stand-alone facility requires the inclusion with support functions as well as the primary process facilities thus yielding a comprehensive design evaluation and cost estimate. For example, items such as roads, security and waste processing which might be shared with an integrated or collocated facility have been fully costed in the feasibility study. Thus, while the details of the facility design might change, the overall concept used in the study can be applied to other facility configurations as planning for the total FWMS develops

  7. Technical feasibility study on polycarbonate solar panels

    NARCIS (Netherlands)

    Hackmann, M.M.; Meuwissen, M.H.H.; Bots, T.L.; Buijs, J.A.H.M.; Broek, K.M.; Kinderman, R.; Tanck, O.B.F.; Schuurmans, F.M.

    2004-01-01

    This paper describes a technical feasibility study on the application of polycarbonate (PC) plates in a superstrate photovoltaic module design. The lamination process was performed in a conventional laminator apparatus using low temperature curing (100°C) ethylene-vinyl-acetate (EVA) as the potting

  8. 7 CFR 1980.442 - Feasibility studies.

    Science.gov (United States)

    2010-01-01

    ... and/or production that are projected in the financial statements. The report shall also identify any constraints or limitations in these financial projections and any other facility or design related factors... a feasibility study for loans to existing businesses when the financial history of the business, the...

  9. Gasohol: economic feasibility study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    David, M. L.; Hammaker, G. S.; Buzenberg, R. J.; Wagner, J. P.

    1978-07-01

    This report was prepared by Development Planning and Research Associates, Inc. under a contract with the Energy Research and Development Center of the University of Nebraska in cooperation with the Agricultural Products Industrial Utilization Committee and the State of Nebraska. Funding for this study was provided to the Energy Research and Development Center by the U.S. Department of Energy and the Old West Regional Commission. The primary objective of the study was to: determine the fiscal and market conditions under which the production of gasohol would be profitable for private producers. For purposes of this study, gasohol is a motor fuel consisting of 10 percent agriculturally-derived anhydrous ethanol and 90 percent unleaded gasoline. The study assumes that gasohol can be a fuel substitute for gasoline; indeed, the cost of gasoline will significantly influence that for gasohol. Gasoline prices are determined by factors external to ethanol; thus, the economic feasibility study of gasohol is in large part an economic feasibility study of fuel-grade ethanol production. More specifically, the study examined the following: the technical aspects of distributing, marketing, and using gasohol; the costs of the distribution and marketing of ethanol and gasohol; the energy balance of ethanol production; the cost of producing ethanol; the factors influencing ehtanol plant size and location; and the conditions that would make ethanol economicaly feasible for private producers.

  10. 75 FR 15772 - Feasibility of Including a Volunteer Requirement for Receipt of Federal Education Tax Credits

    Science.gov (United States)

    2010-03-30

    ... Education Tax Credits AGENCY: Department of the Treasury, Departmental Offices. ACTION: Notice and request... feasibility of instituting a community service requirement as a condition for receiving a tax credit for... requirement as a condition for receiving a tax credit for tuition and related expenses. Treasury and Education...

  11. Nuclear power planning and feasibility studies

    International Nuclear Information System (INIS)

    Streeton, D.F.

    1977-01-01

    This lecture will review the basic steps associated with planning the introduction of nuclear power. Areas covered will include power market surveys, energy resources evaluations, potential alternative strategies, organisational factors and implementational requirements. The lecture will then consider the implications and requirements associated with establishing the feasibility of a nuclear project. Among others, aspects of power systems integration, site selection reactor type evaluation, cost and economic analysis, influence of contracting strategies, comparison with alternative power generation solutions, financial impact, etc. will be discussed and reviewed. (HK) [de

  12. Small modular biopower initiative Phase 1 feasibility studies executive summaries

    Energy Technology Data Exchange (ETDEWEB)

    Bain, R.

    2000-03-06

    The Phase 1 objective is a feasibility study that includes a market assessment, resource assessment, preliminary system design, and assessment of relevant environmental and safety considerations, and evaluation of financial and cost issues, and a preliminary business plan and commercialization strategy. Each participating company will share at least 20% of the cost of the first phase.

  13. Feasibility study on intersection in North Sumatera

    Science.gov (United States)

    Hastuty, I. P.; Sembiring, I. S.; Anas, R.; Lubis, A. S.

    2018-02-01

    Traffic congestion is one of the problems faced by big cities, One of them is Binjai city and Medan city in North Sumatera. One of the causes of congestion is intersection of roads with highway and roads with railroads. To ensure the smooth movement of vehicles, technical handling at the intersection is needed. Therefore, it is necessary to pre-study the feasibility of level crossing in Binjai and Medan to be able to assess the investment needs and the level of importance of road development in the region. The development of transportation infrastructure and facilities is based on the thought of improving the transportation network system. The necessity of systemical integrated transportation system handling is needed in creating a transportation efficiency. The purpose of this study is to identify and prioritize the needs of the railway crossings. The objective which we want to be achieved is to obtain a document that contains technical, economic and environmental ability indicators as a reference in the feasibility and planning studies. The methodology used is collecting the primary data, secondary data, introduction of study area as the initial analysis of the problem. From the study it can be concluded that the existence of railway interchange will move the movement through traffic so it will not interfere the movement of traffic within urban areas and it keeps the national road network performance is still good.

  14. Final Technical Report: Renewable Energy Feasibility Study and Resources Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Rivero, Mariah [BEC Environmental, Inc., Las Vegas, NV (United States)

    2016-02-28

    In March 2011, the U.S. Department of Energy (DOE) awarded White Pine County, Nevada, a grant to assess the feasibility of renewable resource-related economic development activities in the area. The grant project included a public outreach and training component and was to include a demonstration project; however, the demonstration project was not completed due to lack of identification of an entity willing to locate a project in White Pine County. White Pine County completed the assessment of renewable resources and a feasibility study on the potential for a renewable energy-focused economic sector within the County. The feasibility study concluded "all resources studied were present and in sufficient quantity and quality to warrant consideration for development" and there were varying degrees of potential economic impact based on the resource type and project size. The feasibility study and its components were to be used as tools to attract potential developers and other business ventures to the local market. White Pine County also marketed the County’s resources to the renewable energy business community in an effort to develop contracts for demonstration projects. The County also worked to develop partnerships with local educational institutions, including the White Pine County School District, conducted outreach and training for the local community.

  15. Adverse events regional feasibility study: indicative findings.

    Science.gov (United States)

    Davis, P; Lay-Yee, R; Schug, S; Briant, R; Scott, A; Johnson, S; Bingley, W

    2001-05-11

    To identify substantive findings of potential clinical and managerial significance from a regional feasibility study of adverse events (AEs). A standardised protocol using structured implicit review was applied to 142 AEs generated in an audit study of three public hospitals in the Auckland region for admissions in 1995. Areas of potential significance addressed were: timing, location and impact of AEs; preventability; and clinical context and predictability. 142 cases were identified as AEs (10.7% of 1,326 screened records). In 102 cases, 7.7% of all screened records, it was considered to be more likely than not that health care management contributed to the AE. About half the reported AEs occurred before the index admission, the majority outside hospital. Over half of all events resulted in disability that was resolved within a month. An average 6.7 extra days stay in hospital were attributable to AEs. For 60% of AEs the evidence for preventability was either low or nonexistent. Areas of potential prevention were predominantly educational. Over half of all AEs occurred in a surgical context. Medical AEs were more likely to have occurred outside hospital, to be drug-related, to be associated with an acute admission, to be classified as highly preventable, and to have a greater impact on hospital stay. Although the data generated by a feasibility study must be treated with caution, the pattern of results is consistent with comparable Australian findings and is of potential clinical and managerial significance.

  16. Aleutian Pribilof Islands Wind Energy Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Bruce A. Wright

    2012-03-27

    Under this project, the Aleutian Pribilof Islands Association (APIA) conducted wind feasibility studies for Adak, False Pass, Nikolski, Sand Point and St. George. The DOE funds were also be used to continue APIA's role as project coordinator, to expand the communication network quality between all participants and with other wind interest groups in the state and to provide continued education and training opportunities for regional participants. This DOE project began 09/01/2005. We completed the economic and technical feasibility studies for Adak. These were funded by the Alaska Energy Authority. Both wind and hydro appear to be viable renewable energy options for Adak. In False Pass the wind resource is generally good but the site has high turbulence. This would require special care with turbine selection and operations. False Pass may be more suitable for a tidal project. APIA is funded to complete a False Pass tidal feasibility study in 2012. Nikolski has superb potential for wind power development with Class 7 wind power density, moderate wind shear, bi-directional winds and low turbulence. APIA secured nearly $1M from the United States Department of Agriculture Rural Utilities Service Assistance to Rural Communities with Extremely High Energy Costs to install a 65kW wind turbine. The measured average power density and wind speed at Sand Point measured at 20m (66ft), are 424 W/m2 and 6.7 m/s (14.9 mph) respectively. Two 500kW Vestas turbines were installed and when fully integrated in 2012 are expected to provide a cost effective and clean source of electricity, reduce overall diesel fuel consumption estimated at 130,000 gallons/year and decrease air emissions associated with the consumption of diesel fuel. St. George Island has a Class 7 wind resource, which is superior for wind power development. The current strategy, led by Alaska Energy Authority, is to upgrade the St. George electrical distribution system and power plant. Avian studies in Nikolski

  17. Feasibility Study for BioLEIR

    CERN Document Server

    Ghithan, S.; Schuh, S.

    2017-01-01

    The biomedical community asked CERN to investigate the possibility to transform the Low Energy Ion Ring (LEIR) accelerator into a multidisciplinary, biomedical research facil- ity (BioLEIR) that could provide ample, high-quality beams of a range of light ions suitable for clinically oriented fundamental research on cell cultures and for radiation instrumenta- tion development. BioLEIR would be operated when LEIR is not providing heavy ions for the CERN physics programme. The study group was mandated to write a Feasibility Study Report, using high-level engineering estimates based on previous experience, with the aim to: – collect the requirements for such a facility from the biomedical community in close collaboration with the International Strategy Committee for CERN Medical Applica- tions; – determine a coherent set of beam parameters, based on the requirements; – explore whether the beam requirements can be met throughout the facility, from the source to the biomedical end-stations; – perf...

  18. Feasibility studies for the Forward Spectrometer

    International Nuclear Information System (INIS)

    Biernat, Jacek

    2015-01-01

    The Forward Spectrometer designed for the P-barANDA detector will consist of many different detector systems allowing for precise track reconstruction and particle identification. Feasibility studies for Forward Spectrometer done by means of specific reactions will be presented. In the first part of the paper, results of simulations focussing on rate estimates of the tracking stations based on straw tubes will be presented. Next, the importance of the Forward Tracker will be demonstrated through the reconstruction of the ψ(4040) → DD-bar decay. Finally, results from the analysis of the experimental data collected with a straw tube prototype designed and constructed at the Research Center in Juelich will be discussed. (paper)

  19. Bin Set 1 Calcine Retrieval Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    R. D. Adams; S. M. Berry; K. J. Galloway; T. A. Langenwalter; D. A. Lopez; C. M. Noakes; H. K. Peterson; M. I. Pope; R. J. Turk

    1999-10-01

    At the Department of Energy's Idaho Nuclear Technology and Engineering Center, as an interim waste management measure, both mixed high-level liquid waste and sodium bearing waste have been solidified by a calculation process and are stored in the Calcine Solids Storage Facilities. This calcined product will eventually be treated to allow final disposal in a national geologic repository. The Calcine Solids Storage Facilities comprise seven ''bit sets.'' Bin Set 1, the first to be constructed, was completed in 1959, and has been in service since 1963. It is the only bin set that does not meet current safe-shutdown earthquake seismic criteria. In addition, it is the only bin set that lacks built-in features to aid in calcine retrieval. One option to alleviate the seismic compliance issue is to transport the calcine from Bin Set 1 to another bin set which has the required capacity and which is seismically qualified. This report studies the feasibility of retrieving the calcine from Bi n Set 1 and transporting it into Bin Set 6 which is located approximately 650 feet away. Because Bin Set 1 was not designed for calcine retrieval, and because of the high radiation levels and potential contamination spread from the calcined material, this is a challenging engineering task. This report presents preconceptual design studies for remotely-operated, low-density, pneumatic vacuum retrieval and transport systems and equipment that are based on past work performed by the Raytheon Engineers and Constructors architectural engineering firm. The designs presented are considered feasible; however, future development work will be needed in several areas during the subsequent conceptual design phase.

  20. Bin Set 1 Calcine Retrieval Feasibility Study

    International Nuclear Information System (INIS)

    Adams, R.D.; Berry, S.M.; Galloway, K.J.; Langenwalter, T.A.; Lopez, D.A.; Noakes, C.M.; Peterson, H.K.; Pope, M.I.; Turk, R.J.

    1999-01-01

    At the Department of Energy's Idaho Nuclear Technology and Engineering Center, as an interim waste management measure, both mixed high-level liquid waste and sodium bearing waste have been solidified by a calculation process and are stored in the Calcine Solids Storage Facilities. This calcined product will eventually be treated to allow final disposal in a national geologic repository. The Calcine Solids Storage Facilities comprise seven ''bit sets.'' Bin Set 1, the first to be constructed, was completed in 1959, and has been in service since 1963. It is the only bin set that does not meet current safe-shutdown earthquake seismic criteria. In addition, it is the only bin set that lacks built-in features to aid in calcine retrieval. One option to alleviate the seismic compliance issue is to transport the calcine from Bin Set 1 to another bin set which has the required capacity and which is seismically qualified. This report studies the feasibility of retrieving the calcine from Bi n Set 1 and transporting it into Bin Set 6 which is located approximately 650 feet away. Because Bin Set 1 was not designed for calcine retrieval, and because of the high radiation levels and potential contamination spread from the calcined material, this is a challenging engineering task. This report presents preconceptual design studies for remotely-operated, low-density, pneumatic vacuum retrieval and transport systems and equipment that are based on past work performed by the Raytheon Engineers and Constructors architectural engineering firm. The designs presented are considered feasible; however, future development work will be needed in several areas during the subsequent conceptual design phase

  1. Morbidity follow-up feasibility study

    International Nuclear Information System (INIS)

    Carpenter, M.

    1988-02-01

    The report reviews the available sources of data within Canada for undertaking morbidity follow-up studies to both supplement and complement studies using Canadian mortality data. Such studies would permit earlier detection and more sensitive measures of differences in risk for exposures to radiation and allow timely measures to be taken to minimize any occupational and environmental health risk to radiation workers. The technical feasibility of using these sources was reviewed using the criteria of adequate personal identifying information, automation of data records, file size and the accuracy of the morbidity diagnosis information. At the present time certain of the provincial cancer registry files meet these criteria best. A work plan was prepared suggesting a morbidity pilot study to clarify the role of occupational factors in the incidence of cancer among radiation workers using the Alberta Cancer Registry file and the National Dose Registry (NDR) file of radiation workers. For the longer term a full cohort study using the National Cancer Incidence Reporting System (NCIRS) and the NDR workers as the study population would provide information on all radiation workers on a national basis. A work plan was prepared and some initial format conversion of historical data was undertaken to begin developing the NCIRS into a data base suitable for long-term health studies

  2. Training Endogenous Task Shifting Using Music Therapy: A Feasibility Study.

    Science.gov (United States)

    Lynch, Colleen; LaGasse, A Blythe

    2016-01-01

    People with acquired brain injury (ABI) are highly susceptible to disturbances in executive functioning (EF), and these effects are pervasive. Research studies using music therapy for cognitive improvement in this population are limited. The purpose of this study was to determine the feasibility of a Musical Executive Function Training (MEFT) intervention to address task-shifting skills in adults with ABI and to obtain preliminary evidence of intervention effect on task shifting. Fourteen participants were randomly assigned to one of three groups: a music therapy intervention group (MTG), a singing group (SG), or the no-intervention control group (CG). The SG and MTG met for one hour a day for five days. Feasibility measures included participant completion rates and intervention fidelity. Potential benefits were measured using the Trail Making Test and the Paced Auditory Serial Addition Task as a pre- and posttest measure. Participant completion rates and interventionist fidelity to the protocol supported feasibility. One-way ANOVA of the pre- and posttest group differences revealed a trend toward improvement in the MTG over the SG. Feasibility and effect size data support a larger trial of the MEFT protocol. © the American Music Therapy Association 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  3. Feasibility study on floating nuclear power station

    International Nuclear Information System (INIS)

    Kajima, Ryoichi

    1987-01-01

    It is stipulated that nuclear power plants are to be built on solid rock bases on land in Japan. However, there are a limited number of appropriate siting grounds. The Central Research Institute of Electric Power Industry has engaged since 1981 in the studies on the construction technology of power plants, aiming at establishing new siting technology to expand the possible siting areas for nuclear power plants. Underground siting is regarded as a proven technology due to the experience in underground hydroelectric power plants. The technology of siting on quaternary ground is now at the stage of verification. In this report, the outline of floating type offshore/inshore siting technology is introduced, which is considered to be feasible in view of the technical and economical aspects. Three fixed structure types were selected, of which the foundations are fixed to seabed, plant superstructures are above sea surface, and which are floating type. Aiming at ensuring the aseismatic stability of the plant foundations, the construction technology is studied, and the structural concept omitting buoyancy is possible. The most practical water depth is not more than 20 m. The overall plant design, earthquake isolation effect and breakwater are described. (Kako, I.)

  4. BIOMASS-TO-ENERGY FEASIBILITY STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Cecil T. Massie

    2002-09-03

    The purpose of this study was to assess the economic and technical feasibility of producing electricity and thermal energy from biomass by gasification. For an economic model we chose a large barley malting facility operated by Rahr Malting Co. in Shakopee, Minnesota. This plant provides an excellent backdrop for this study because it has both large electrical loads and thermal loads that allowed us to consider a wide range of sizes and technical options. In the end, eleven scenarios were considered ranging from 3.1 megawatts (MWe) to 19.8 MWe. By locating the gasification and generation at an agricultural product processing plant with large electrical and thermal loads, the expectation was that some of the limitations of stand-alone biomass power plants would be overcome. In addition, since the process itself created significant volumes of low value biomass, the hope was that most of the biomass gathering and transport issues would be handled as well. The development of low-BTU gas turbines is expected to fill a niche between the upper limit of multiple spark ignited engine set systems around 5 MWe and the minimum reasonable scale for steam turbine systems around 10 MWe.

  5. Encoal mild coal gasification project: Commercial plant feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    In order to determine the viability of any Liquids from Coal (LFC) commercial venture, TEK-KOL and its partner, Mitsubishi Heavy Industries (MHI), have put together a technical and economic feasibility study for a commercial-size LFC Plant located at Zeigler Coal Holding Company`s North Rochelle Mine site. This resulting document, the ENCOAL Mild Coal Gasification Plant: Commercial Plant Feasibility Study, includes basic plant design, capital estimates, market assessment for coproducts, operating cost assessments, and overall financial evaluation for a generic Powder River Basin based plant. This document and format closely resembles a typical Phase II study as assembled by the TEK-KOL Partnership to evaluate potential sites for LFC commercial facilities around the world.

  6. Pinellas Plant feasibility study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Pinellas Plant was built in 1956 to manufacture neutron generators, a principal component in nuclear weapons. In September 1990, the Department of Health and Rehabilitative Services (HRS) entered into an agreement with DOE to independently examine environmental monitoring data from the plant and health data from Pinellas County to determine if an epidemiological study is technically feasible to measure possible off-site health effects from ionizing radiation. Through normal plant operations, some radioactive materials have been released to the environment. Eighty percent of the total plant releases of 107,707 curies occurred in the early years of plant operation (1957--1960). The primary materials released were tritium gas, tritium oxide and krypton-85. Environmental monitoring for radioactive releases from the plant has been done regularly since 1975. The US Public Health Service Centers for Disease Control and Prevention (CDC), in assisting HRS, has determined that sufficient radiological data exist by which a dose reconstruction can be done. A dose reconstruction can provide an estimate of how much radiological exposure someone living in the vicinity of the Pinellas Plant may have suffered from environmental releases.

  7. Pinellas Plant feasibility study. Final report

    International Nuclear Information System (INIS)

    1994-09-01

    The Pinellas Plant was built in 1956 to manufacture neutron generators, a principal component in nuclear weapons. In September 1990, the Department of Health and Rehabilitative Services (HRS) entered into an agreement with DOE to independently examine environmental monitoring data from the plant and health data from Pinellas County to determine if an epidemiological study is technically feasible to measure possible off-site health effects from ionizing radiation. Through normal plant operations, some radioactive materials have been released to the environment. Eighty percent of the total plant releases of 107,707 curies occurred in the early years of plant operation (1957--1960). The primary materials released were tritium gas, tritium oxide and krypton-85. Environmental monitoring for radioactive releases from the plant has been done regularly since 1975. The US Public Health Service Centers for Disease Control and Prevention (CDC), in assisting HRS, has determined that sufficient radiological data exist by which a dose reconstruction can be done. A dose reconstruction can provide an estimate of how much radiological exposure someone living in the vicinity of the Pinellas Plant may have suffered from environmental releases

  8. Cogeneration feasibility study in the Gulf States Utilities service area

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    Sites in the Gulf States Utilities service are considered for cogeneration feasibility studies. The sources of steam considered for the Orange, Texas and Geismar, Lake Charles, and North Baton Rouge, Louisiana sites include oil, coal, HTGR steamers, consolidated nuclear steam system, atmospheric fluidized-bed coal combustion, and coal gasification. Concepts concerning cogeneration fuel systems were categorized by technical applicability as: current technology (pulverized coal-fired boilers and fuel oil-fired boilers), advanced technology under development (HTGR steamers and the CNSS), and advanced technology for future development (atmospheric fluidized-bed boilers and coal gasification). In addition to providing data on cogeneration plant generally useful in the US, the study determined the technical and economic feasibility of steam and electric power cogeneration using coal and nuclear fuels for localized industrial complexes. Details on site selection, plant descriptions, cost estimates, economic analysis, and plant schedule and implementation. (MCW)

  9. Feasibility study on embedded transport core calculations

    International Nuclear Information System (INIS)

    Ivanov, B.; Zikatanov, L.; Ivanov, K.

    2007-01-01

    The main objective of this study is to develop an advanced core calculation methodology based on embedded diffusion and transport calculations. The scheme proposed in this work is based on embedded diffusion or SP 3 pin-by-pin local fuel assembly calculation within the framework of the Nodal Expansion Method (NEM) diffusion core calculation. The SP 3 method has gained popularity in the last 10 years as an advanced method for neutronics calculation. NEM is a multi-group nodal diffusion code developed, maintained and continuously improved at the Pennsylvania State University. The developed calculation scheme is a non-linear iteration process, which involves cross-section homogenization, on-line discontinuity factors generation, and boundary conditions evaluation by the global solution passed to the local calculation. In order to accomplish the local calculation, a new code has been developed based on the Finite Elements Method (FEM), which is capable of performing both diffusion and SP 3 calculations. The new code will be used in the framework of the NEM code in order to perform embedded pin-by-pin diffusion and SP 3 calculations on fuel assembly basis. The development of the diffusion and SP 3 FEM code is presented first following by its application to several problems. Description of the proposed embedded scheme is provided next as well as the obtained preliminary results of the C3 MOX benchmark. The results from the embedded calculations are compared with direct pin-by-pin whole core calculations in terms of accuracy and efficiency followed by conclusions made about the feasibility of the proposed embedded approach. (authors)

  10. PUEBLO OF ZIA RENEWABLE ENERGY DEVELOPMENT FEASIBILITY STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Pino, Peter M. [Tribal Administrator (Ret.), Pueblo of Zia; Lakshman, Jai [Project Manager (NDA) for Pueblo of Zia; Toole, G. Loren [Principal Investigator, Los Alamos National Laboratory - Energy Analysis Team/ CCS-3, D-4; Hand, Dan [P.E., Sustainable Enginerring; Witcher, James; Emerson, Michael A. [Senior V.P., ARES Corporation; Turner, Jeremy [Executive Director, NM Renewable Energy Transmission Authority; Sandidge, Wendy [Director of Operations, NM Community Capital

    2014-06-30

    The Pueblo of Zia will conduct a comprehensive feasibility study for best-use application(s) for development of renewable energy resources on its tribally held TRUST lands (i.e., Trust Lands of Zia Indian Reservation). The feasibility study is essential for determining the technical and economic viability of a future renewable project(s) on Zia tribal lands, including the potential economic and environmental benefits for the Tribe. Project Objectives: The feasibility study is essential for determining the technical and economic viability of future renewable project(s) on Zia tribal lands, including the potential economic and environmental benefits for the Tribe to: 1. Provide a balanced local renewable power supply for Zia Pueblo, its members, tribal offices, schools and buildings, and businesses on tribal lands 2. Provide a firm power supply for export and commercial market distribution 3. Provide economic development for the Tribe and its members, including job training and creation, each in accordance with the goals and objectives as conveyed by the Pueblo of Zia Tribal Council, Tribal Administration, and outlined in The Pueblo of Zia Comprehensive Plan and Pueblo of Zia — Zia Enterprise Zone Master Plan. A key goal of the study is to analyze the integrated development of solar, geothermal, and wind renewable energy resources at Zia Pueblo, with added potential to combine gas-fired generation to accomplish energy firming. Geothermal offers a base load source of energy, providing power continuously for end users. Wind and solar offer intermediate and peaking sources of energy, which can be harvested throughout the day, with periods of variable but predicable output. Variability will be managed in an integrated manner, using Zia Pueblo's combined renewable resources to generate high-quality power. Tasks are intended to collect, catalog, map, and analyze existing data on Zia Pueblo's renewable energy resource base and then match resource attributes with

  11. INCLUDING RISK IN ECONOMIC FEASIBILITY ANALYSIS:A STOCHASTIC SIMULATION MODEL FOR BLUEBERRY INVESTMENT DECISIONS IN CHILE

    Directory of Open Access Journals (Sweden)

    GERMÁN LOBOS

    2015-12-01

    Full Text Available ABSTRACT The traditional method of net present value (NPV to analyze the economic profitability of an investment (based on a deterministic approach does not adequately represent the implicit risk associated with different but correlated input variables. Using a stochastic simulation approach for evaluating the profitability of blueberry (Vaccinium corymbosum L. production in Chile, the objective of this study is to illustrate the complexity of including risk in economic feasibility analysis when the project is subject to several but correlated risks. The results of the simulation analysis suggest that the non-inclusion of the intratemporal correlation between input variables underestimate the risk associated with investment decisions. The methodological contribution of this study illustrates the complexity of the interrelationships between uncertain variables and their impact on the convenience of carrying out this type of business in Chile. The steps for the analysis of economic viability were: First, adjusted probability distributions for stochastic input variables (SIV were simulated and validated. Second, the random values of SIV were used to calculate random values of variables such as production, revenues, costs, depreciation, taxes and net cash flows. Third, the complete stochastic model was simulated with 10,000 iterations using random values for SIV. This result gave information to estimate the probability distributions of the stochastic output variables (SOV such as the net present value, internal rate of return, value at risk, average cost of production, contribution margin and return on capital. Fourth, the complete stochastic model simulation results were used to analyze alternative scenarios and provide the results to decision makers in the form of probabilities, probability distributions, and for the SOV probabilistic forecasts. The main conclusion shown that this project is a profitable alternative investment in fruit trees in

  12. Technical feasibility study of Voltage Optimization Unit

    DEFF Research Database (Denmark)

    Hu, Junjie; Marinelli, Mattia; Coppo, Massimiliano

    are used as load basics for the analysis. In term of PV genera-tion profiles, a realistic PV output power is assumed. Four relevant indicies such as phase neutral voltage, netural potential voltage, unbalanced factor (VUF), and power losses are evaluated in the present study. The simulation tests include...

  13. TMI-2 fuel-recovery plant. Feasibility study

    International Nuclear Information System (INIS)

    Evans, D.L.

    1982-12-01

    This project is a feasibility study for constructing a TMI-2 core Fuel Recovery Plant at the Idaho National Engineering Laboratory (INEL). The primary objectives of the Fuel Recovery Plant (FRP) are to recover and account for the fuel and to process, isolate, and package the waste material from the TMI-2 core. This feasibility study is predicated on a baseline plant and covers its design, fabrication, installation, testing and operation. Alternative methods for the disposal of the TMI-2 core have also been considered, but not examined in detail for their feasibility. The FRP will receive TMI-2 fuel in canisters. The fuel will vary from core debris to intact fuel assemblies and include some core structural materials. The canister contents will be shredded and subsequently fed to a dissolver. Uranium, plutonium, fission products, and some core structural material will be dissolved. The uranium will be separated by solvent extraction and solidified by calcination. The plutonium will also be separated by solvent extraction and routed to the Plutonium Extraction Facility. The wastes will be packaged for further treatment, temporary storage or permanent disposal

  14. Concurrent paclitaxel and radiotherapy. Treatment feasibility studies

    International Nuclear Information System (INIS)

    Vogt, H.G.; Martin, T.; Kolotas, C.; Hey, S.; Schneider, L.; Templin, T.; Zamboglou, N.; Dornoff, W.; Kettner, H.

    1997-01-01

    with 5x18 Gy/week up to 59.4 to 73.8 Gy. - VII. Concurrent paclitaxel and radiation for gliomas of the brain: 100 mg/m 2 paclitaxel as a 3-hour infusion weekly for 6 weeks simultaneous with radiotherapy in shrinking field technique with 5x2 Gy/week up to 60 Gy. Results: Our initial experiences with weekly application of paclitaxel as a 3-hour infusion in the dosages we used for simultaneous radiochemotherapy of malignancies in different anatomical sites has shown that this treatment concept is feasible, safe and effective. Conclusions: Whether this combined modality will enhance the response rates or influence survival rates has yet to be confirmed in phase-III studies. (orig.) [de

  15. Biogas Koczala. Biogas project in Koczala. Feasibility study. Technical report

    International Nuclear Information System (INIS)

    2004-08-01

    The present production of district heating in Koczala is based on coal. The district heating system is worn out technically and economically and according to the 2001 Energy Plan of Koczala the district heating plant shall be converted to a combination of a biogas fired CHP and a wood chip boiler. The overall objective of this project is to access the feasibility and viability construction an operation of a biogas plant owned by the co-operative agricultural company, Poldanor S.A. The feasibility study includes: 1) Availability of organic waste in the Koczala area, 2) Possibilities of using energy crops in the biogas plant, 3) Possibilities of receiving grants from the Polish National Fund for Environmental Protection, the new EU regional funds and through the joint implementation market (CO 2 quotas), 4) Alternative locations of the biogas plant and the CHP unit, 5) Alternative strategies for selling electricity and heat, 6) Organisational issues (ownership). This report concludes that implementing the biogas project is environmentally and financially feasible and viable. If organic waste and/or maize silage can be provided and gasified without problems, the plant can supply as well the Koczala farm as the fodder mill with steam and heat, and also supply Koczala district heating system with approx. 75% of yearly heat consumption. Furthermore, electricity is supplied to the fodder mill and the public grid. (BA)

  16. Verifying FreeRTOS; a feasibility study

    OpenAIRE

    Pronk, C.

    2010-01-01

    This paper presents a study on modeling and verifying the kernel of Real-Time Operating Systems (RTOS). The study will show advances in formally verifying such an RTOS both by refinement and by model checking approaches. This work fits in the context of Hoare’s verification challenge. Several real-time operating systems will be discussed including some commercial ones. The focus of the latter part of the paper will be on verifying FreeRTOS. The paper investigates a number of ways to verify th...

  17. Feasibility Study of Biomass Electrical Generation on Tribal Lands

    Energy Technology Data Exchange (ETDEWEB)

    Tom Roche; Richard Hartmann; Joohn Luton; Warren Hudelson; Roger Blomguist; Jan Hacker; Colene Frye

    2005-03-29

    The goals of the St. Croix Tribe are to develop economically viable energy production facilities using readily available renewable biomass fuel sources at an acceptable cost per kilowatt hour ($/kWh), to provide new and meaningful permanent employment, retain and expand existing employment (logging) and provide revenues for both producers and sellers of the finished product. This is a feasibility study including an assessment of available biomass fuel, technology assessment, site selection, economics viability given the foreseeable fuel and generation costs, as well as an assessment of the potential markets for renewable energy.

  18. A feasiblity study of an ultrasonic test phantom arm

    Science.gov (United States)

    Schneider, Philip

    This thesis is a feasibility study for the creation of a test phantom that replicates the physiological features, from an acoustic and mechanical standpoint, of that of a human arm. Physiological feature set includes; Heart, Arteries, Veins, Bone, Muscle, Fat, Skin, and Dermotographic Features (finger prints). Mechanical Aspects include, vascular compression and distention, elasticity of tissue layers, mechanics of human heart. The end goal of which to have a working understanding of each component in order to create a controllable, real time, physiologically accurate, test phantom for a wide range of ultrasonic based applications. These applications can range from devices like wearable technologies to medical training, to biometric "Liveness" detection methods. The proposed phantom would allow for a number of natural bodily functions to be measured including but not limited to vascular mapping, blood pressure, heart rate, subdermal imaging, and general ultrasonic imaging.

  19. Slaughterhouse sewage treatment using gamma radiation - economical feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Rita; Botelho, M. Luisa [Instituto Tecnologico e Nuclear, Sacavem (Portugal). Dept. de Fisica]. E-mail: ritamelo@itn.pt; mlb@itn.pt; Branco, Joaquim [Instituto Tecnologico e Nuclear, Sacavem (Portugal). Dept. de Quimica]. E-mail: jbranco@itn.pt

    2005-07-01

    This paper presents preliminary results of a financial viability study for the implementation of gamma radiation technology on a slaughterhouse wastewater treatment industry. Five scenarios were studied, including the current practice, representing different types of treatments and goals, e.g.: water reuse and/or sludge add value as agriculture fertilizers. Cost-benefit analysis, including the net present value (NPV) of each scenario, was used as a technique to compare the relative value of various strategies. Taking in account that the initial investment is amortized after 20 years, the implementation of Co-60 treatment with 20% water reuse and sludge application as agriculture fertilizers represents the most profitable project with the highest NPV. Therefore, the implementation of gamma radiation technology on a slaughterhouse wastewater treatment industry is not only technically viable as well as economically feasible. (author)

  20. Sedimentary Geothermal Feasibility Study: October 2016

    Energy Technology Data Exchange (ETDEWEB)

    Augustine, Chad [National Renewable Energy Lab. (NREL), Golden, CO (United States); Zerpa, Luis [Colorado School of Mines, Golden, CO (United States)

    2017-01-01

    The objective of this project is to analyze the feasibility of commercial geothermal projects using numerical reservoir simulation, considering a sedimentary reservoir with low permeability that requires productivity enhancement. A commercial thermal reservoir simulator (STARS, from Computer Modeling Group, CMG) is used in this work for numerical modeling. In the first stage of this project (FY14), a hypothetical numerical reservoir model was developed, and validated against an analytical solution. The following model parameters were considered to obtain an acceptable match between the numerical and analytical solutions: grid block size, time step and reservoir areal dimensions; the latter related to boundary effects on the numerical solution. Systematic model runs showed that insufficient grid sizing generates numerical dispersion that causes the numerical model to underestimate the thermal breakthrough time compared to the analytic model. As grid sizing is decreased, the model results converge on a solution. Likewise, insufficient reservoir model area introduces boundary effects in the numerical solution that cause the model results to differ from the analytical solution.

  1. Co-combustion feasibility study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Handcock, D.J. [Clough, Harbour and Associates, Albany, NY (United States)

    1995-01-01

    This report investigates the technical and economic feasibility of co-combusting municipal sewage sludge produced by the Saratoga County Sewer District No. 1 with paper mill sludge produced by the Cottrell Paper Company, Encore Paper Company, International Paper Company, Mohawk Paper Mills, and TAGSONS Papers at the Saratoga County Sewer District No. 1`s secondary wastewater treatment plant and recovering any available energy products. The co-combustion facility would consist of sludge and wood chip storage and conveying systems, belt filter presses, screw presses, fluidized-bed incinerators, venturi scrubbers and tray cooling systems, ash dewatering facilities, heat recovery steam generators, gas-fired steam superheaters, and a back-pressure steam turbine system. Clean waste wood chips would be used as an auxiliary fuel in the fluidized-bed incinerators. It is recommended that the ash produced by the proposed facility be beneficially used, potentially as a raw material in the manufacture of cement and/or as an interim barrier layer in landfills.

  2. Feasibility study of the AOSTA experimental campaign

    Science.gov (United States)

    Carta, M.; Blaise, P.; Bethaz, C.; Boccia, F.; Fabrizio, V.; Geslot, B.; Grossi, A.; Gruel, A.

    2016-03-01

    The reduction of the nuclear waste is one of the most important nuclear issues. The high radiotoxicity of the spent fuel is due to plutonium and some minor actinides (MAs) such as neptunium, americium and curium, above all. One way to reduce their hazard is to destroy by fission MAs in appropriate nuclear reactors. To allow the MAs destruction an important effort have been done on the nuclear data due to the poor knowledge in this field. In the framework of one of the NEA Expert Group on Integral Experiments for Minor Actinide Management an analysis of the feasibility of MAs irradiation campaign in the TAPIRO fast research reactor is carried out. This paper provides preliminary results obtained by calculations modelling the irradiation, in different TAPIRO irradiation channels, of some CEA samples coming from the French experimental campaign OSMOSE, loaded with different contents of MAs, in order to access, through particular peak spectrometry, to their capture cross section. On the basis of neutron transport calculation results, obtained by both deterministic and Monte Carlo methods, an estimate of the irradiated samples counting levels from the AOSTA (Activation of OSMOSE Samples in TAPIRO) experimental campaign is provided.

  3. Feasibility study of the AOSTA experimental campaign

    Directory of Open Access Journals (Sweden)

    Carta M.

    2016-01-01

    Full Text Available The reduction of the nuclear waste is one of the most important nuclear issues. The high radiotoxicity of the spent fuel is due to plutonium and some minor actinides (MAs such as neptunium, americium and curium, above all. One way to reduce their hazard is to destroy by fission MAs in appropriate nuclear reactors. To allow the MAs destruction an important effort have been done on the nuclear data due to the poor knowledge in this field. In the framework of one of the NEA Expert Group on Integral Experiments for Minor Actinide Management an analysis of the feasibility of MAs irradiation campaign in the TAPIRO fast research reactor is carried out. This paper provides preliminary results obtained by calculations modelling the irradiation, in different TAPIRO irradiation channels, of some CEA samples coming from the French experimental campaign OSMOSE, loaded with different contents of MAs, in order to access, through particular peak spectrometry, to their capture cross section. On the basis of neutron transport calculation results, obtained by both deterministic and Monte Carlo methods, an estimate of the irradiated samples counting levels from the AOSTA (Activation of OSMOSE Samples in TAPIRO experimental campaign is provided.

  4. Washoe Tribe Alternative Energy Feasibility Study Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Jennifer [Washoe Tribe of NV and CA

    2014-10-01

    The Washoe Tribe of Nevada and California was awarded funding to complete the Washoe Tribe Alternative Energy Feasibility Study project. The main goal of the project was to complete an alternative energy feasibility study. This study was completed to evaluate “the potential for development of a variety of renewable energy projects and to conduct an alternative energy feasibility study that determines which alternative energy resources have the greatest economic opportunity for the Tribe, while respecting cultural and environmental values” (Baker-Tilly, 2014). The study concluded that distributed generation solar projects are the best option for renewable energy development and asset ownership for the Washoe Tribe. Concentrating solar projects, utility scale wind projects, geothermal, and biomass resource projects were also evaluated during the study and it was determined that these alternatives would not be feasible at this time.

  5. Radiation processing of flue gases: Guidelines for feasibility studies

    International Nuclear Information System (INIS)

    2000-12-01

    The aim of this publication is to facilitate the performance of feasibility studies for Electron Beam flue gas cleanup projects by providing guidelines to conduct these studies and compiling information on the state of the art. This document summarizes the contents of a feasibility study; discusses the main items in plant construction, measurement and control systems, radiation safety and building construction; and lists the required economic data for internationally funded projects

  6. Mechanics Based Tomography: A Preliminary Feasibility Study

    Directory of Open Access Journals (Sweden)

    Yue Mei

    2017-05-01

    Full Text Available We present a non-destructive approach to sense inclusion objects embedded in a solid medium remotely from force sensors applied to the medium and boundary displacements that could be measured via a digital image correlation system using a set of cameras. We provide a rationale and strategy to uniquely identify the heterogeneous sample composition based on stiffness (here, shear modulus maps. The feasibility of this inversion scheme is tested with simulated experiments that could have clinical relevance in diagnostic imaging (e.g., tumor detection or could be applied to engineering materials. No assumptions are made on the shape or stiffness quantity of the inclusions. We observe that the novel inversion method using solely boundary displacements and force measurements performs well in recovering the heterogeneous material/tissue composition that consists of one and two stiff inclusions embedded in a softer background material. Furthermore, the target shear modulus value for the stiffer inclusion region is underestimated and the inclusion size is overestimated when incomplete boundary displacements on some part of the boundary are utilized. For displacements measured on the entire boundary, the shear modulus reconstruction improves significantly. Additionally, we observe that with increasing number of displacement data sets utilized in solving the inverse problem, the quality of the mapped shear moduli improves. We also analyze the sensitivity of the shear modulus maps on the noise level varied between 0.1% and 5% white Gaussian noise in the boundary displacements, force and corresponding displacement indentation. Finally, a sensitivity analysis of the recovered shear moduli to the depth, stiffness and the shape of the stiff inclusion is performed. We conclude that this approach has potential as a novel imaging modality and refer to it as Mechanics Based Tomography (MBT.

  7. Feasibility study of EEW application in Korea

    Science.gov (United States)

    Chi, H.; Park, J.; Sheen, D.

    2008-12-01

    At present, it seems almost impossible to predict where and how much strong a earthquake will happen within very limited time such as two or three days before it occurs. However, the advantage of modern electronic techniques can support us very fast communication tools around nation-wide area so that we can receive P- waves arrival information from seismic stations through communication lines before S-waves strike our living site. This is the key of EEW(Earthquake Early Warning) concept that is under development around world especially including Japan, United State of America, and Taiwan. In this pilot study we proposed the direction for developing Korean Earthquake Early Warning System. Considering the state of the art techniques used in Japan, USA and Taiwan, ElarmS would be more adaptable to Korea since ElarmS can work from the low limit of moderate earthquakes around magnitude 3.5, which would annually happen in Korea. We investigate empirical magnitude scaling relationship for South Korea using 27 events ranging in magnitude from 2.2 to 4.9 recorded by the Korea Institute of Geoscience And Mineral Resources (KIGAM) and the Korea Meteorological Administration (KMA) for 2007. We measure the maximum predominant period and the peak displacement or velocity amplitude from the first 4 seconds of P wave arrivals to derive period-magnitude and amplitude-magnitude scaling relationship, respectively. For the period-magnitude relationship, we find that 10 Hz low-pass filter yields better estimate than 3 Hz. This is because the magnitudes of most events used in this study are too small (<3.0). It is also shown that peak displacement for velocity instruments and peak velocity for accelerometers have their own magnitude scaling relationships, respectively. Thus, for the amplitude-magnitude relationship, like the relationships in northern California, two individual amplitude scaling relationships would be necessary.

  8. Battery energy storage market feasibility study -- Expanded report

    Energy Technology Data Exchange (ETDEWEB)

    Kraft, S. [Frost and Sullivan, Mountain View, CA (United States); Akhil, A. [Sandia National Labs., Albuquerque, NM (United States). Energy Storage Systems Analysis and Development Dept.

    1997-09-01

    Under the sponsorship of the US Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the battery energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed battery storage as an important technology to enable increased use of renewable energy and as a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).

  9. Battery energy storage market feasibility study - Expanded report

    International Nuclear Information System (INIS)

    Kraft, S.; Akhil, A.

    1997-09-01

    Under the sponsorship of the US Department of Energy's Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the battery energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed battery storage as an important technology to enable increased use of renewable energy and as a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1)

  10. Optical Coherence Tomography of the Breast: A Feasibility Study

    National Research Council Canada - National Science Library

    Connolly, James L

    2005-01-01

    .... This novel imaging technology has the potential to improve cancer detection and diagnosis. The aim of this study was to determine the feasibility of applying OCT imaging to normal and pathologic human breast tissue, as well as other human tissues...

  11. Optical Coherence Tomography of the Breast: A Feasibility Study

    National Research Council Canada - National Science Library

    Connolly, James

    2003-01-01

    .... This novel imaging technology has the potential to improve cancer detection and diagnosis. The aim of this study was to determine the feasibility of applying OCT imaging to normal and pathologic human breast tissue, as well as other human tissues...

  12. A feasibility study of bridge deck deicing using geothermal energy.

    Science.gov (United States)

    2015-04-01

    In this study, we investigated the feasibility of a ground-coupled system that utilizes heat energy harvested from the ground for : deicing of bridge decks. Heat exchange is performed using circulation loops integrated into the deep foundations suppo...

  13. Final Report: Feasibility Study of Biomass in Snohomish County, Washington

    Energy Technology Data Exchange (ETDEWEB)

    Daryl Williams (Tulalip Tribes); Ray Clark (Clark Group)

    2005-01-31

    This report and its attachments summarizes the results of a unique tribal-farmer cooperative study to evaluate the feasibility of building one or more regional anaerobic digestion systems in Snohomish County, Washington.

  14. Ute Mountain Ute Tribe Community-Scale Solar Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Rapp, Jim [Parametrix; Knight, Tawnie [Ute Mountain Ute Tribe

    2014-01-30

    Parametrix Inc. conducted a feasibility study for the Ute Mountain Ute Tribe to determine whether or not a community-scale solar farm would be feasible for the community. The important part of the study was to find where the best fit for the solar farm could be. In the end, a 3MW community-scale solar farm was found best fit with the location of two hayfield sites.

  15. Northeastern California Ethanol Manufacturing Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    1997-11-01

    This report is a compilation of work by several different organizations and includes the NREL researched report, 'Biomass to Ethanol, Facility Design, Cost Estimate, and Financial Evaluation' Volumes I and II.

  16. Keystone feasibility study. Final report. Vol. 4

    Energy Technology Data Exchange (ETDEWEB)

    1982-12-01

    Volume four of the Keystone coal-to-methanol project includes the following: (1) project management; (2) economic and financial analyses; (3) market analysis; (4) process licensing and agreements; and (5) appendices. 24 figures, 27 tables.

  17. Feasibility design study. Land-based OTEC plants. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Brewer, J. H.; Minor, J.; Jacobs, R.

    1979-01-01

    The purpose of this study has been to determine the feasibility of installing 10 MWe (MegaWatt-electric) and 40 MWe land-based OTEC demonstration power plants at two specific sites: Keahole Point on the western shore of the island of Hawaii; and Punta Tuna, on the southeast coast of the main island of Puerto Rico. In addition, the study has included development of design parameters, schedules and budgets for the design, construction and operation of these plants. Seawater systems (intake and discharge pipes) were to be sized so that flow losses were equivalent to those expected with a platform-based OTEC power plant. The power module (components and general arrangement was established based on the TRW design. Results are presented in detail. (WHK)

  18. Defining Feasibility and Pilot Studies in Preparation for Randomised Controlled Trials: Development of a Conceptual Framework.

    Directory of Open Access Journals (Sweden)

    Sandra M Eldridge

    Full Text Available We describe a framework for defining pilot and feasibility studies focusing on studies conducted in preparation for a randomised controlled trial. To develop the framework, we undertook a Delphi survey; ran an open meeting at a trial methodology conference; conducted a review of definitions outside the health research context; consulted experts at an international consensus meeting; and reviewed 27 empirical pilot or feasibility studies. We initially adopted mutually exclusive definitions of pilot and feasibility studies. However, some Delphi survey respondents and the majority of open meeting attendees disagreed with the idea of mutually exclusive definitions. Their viewpoint was supported by definitions outside the health research context, the use of the terms 'pilot' and 'feasibility' in the literature, and participants at the international consensus meeting. In our framework, pilot studies are a subset of feasibility studies, rather than the two being mutually exclusive. A feasibility study asks whether something can be done, should we proceed with it, and if so, how. A pilot study asks the same questions but also has a specific design feature: in a pilot study a future study, or part of a future study, is conducted on a smaller scale. We suggest that to facilitate their identification, these studies should be clearly identified using the terms 'feasibility' or 'pilot' as appropriate. This should include feasibility studies that are largely qualitative; we found these difficult to identify in electronic searches because researchers rarely used the term 'feasibility' in the title or abstract of such studies. Investigators should also report appropriate objectives and methods related to feasibility; and give clear confirmation that their study is in preparation for a future randomised controlled trial designed to assess the effect of an intervention.

  19. Feasibility study for an alternative PWR-containment. Stage 3

    International Nuclear Information System (INIS)

    Eibl, J.

    1994-08-01

    The following report deals with a feasibility study on a lightwater reactor containment which is oriented at the German 1300 MW Convoy Type reactor. It was the aim of this containment development for a future nuclear ractor to restrict all consequences of an extreme reactor failure exclusively to the interior of the containment. Also the decay heat of the relevant core catchers is provided to be removed by passive means. This containment development was a common project with the Nuclear Research Centre at Karlsruhe (KFK). As a consequence of this intention the concept started from upper physical limits, such as a maximum static pressure of 1,5 MPa at 200 , a global and local detonation pressure of 8,4 MPa at an impulse of 5,0 kPas, an upward directed force exerted by the pressure vessel of 300 MN, a horizontal force exerted by the moving pressure vessel onto its environment of 70 MN, a cavern pressure around the core catcher of 3,0 resp., 2,0 MPa and a steam explosion-energy of 300 MJ. Such a contaiment concept is presented and inverstigated with respect to its feasibility, statically and dynamically in all relevant details including earthquake actions. (orig.) [de

  20. Conoscopic holography for image registration: a feasibility study

    Science.gov (United States)

    Lathrop, Ray A.; Cheng, Tiffany T.; Webster, Robert J., III

    2009-02-01

    Preoperative image data can facilitate intrasurgical guidance by revealing interior features of opaque tissues, provided image data can be accurately registered to the physical patient. Registration is challenging in organs that are deformable and lack features suitable for use as alignment fiducials (e.g. liver, kidneys, etc.). However, provided intraoperative sensing of surface contours can be accomplished, a variety of rigid and deformable 3D surface registration techniques become applicable. In this paper, we evaluate the feasibility of conoscopic holography as a new method to sense organ surface shape. We also describe potential advantages of conoscopic holography, including the promise of replacing open surgery with a laparoscopic approach. Our feasibility study investigated use of a tracked off-the-shelf conoscopic holography unit to perform a surface scans on several types of biological and synthetic phantom tissues. After first exploring baseline accuracy and repeatability of distance measurements, we performed a number of surface scan experiments on the phantom and ex vivo tissues with a variety of surface properties and shapes. These indicate that conoscopic holography is capable of generating surface point clouds of at least comparable (and perhaps eventually improved) accuracy in comparison to published experimental laser triangulation-based surface scanning results.

  1. Feasibility studies of radiation sterilization of some pharmaceutical products

    International Nuclear Information System (INIS)

    Gopal, N.G.S.; Rajagopalan, S.; Sharma, G.

    1975-01-01

    The paper deals with some studies carried out to evaluate the feasibility of radiation sterilization or treatment of some medical products and pharmaceuticals of immediate importance to their respective industries. The products include penicillin G sodium, ampicillin sodium, tetracyclin hydrochloride ointment,hydrocortisone acetate and its ointment, aqueous sodium chloride solutions (0.9 and 20%), fluorescein sodium strips, urea, ethylmorphine hydrochloride, aqueous solution of chlorobutanol and one of its commercial preparations, phenylmercuric nitrate and its aqueous solutions, aqueous solutions of methyl and propyl paraben, lactose, gum karaya, absorbent cotton and poly-(vinyl chloride) based medical products. The irradiated products have been examined for pharmacopoeial specifications wherever available. In general the products have been examined for changes in colour, pH, ultra-violet and infra-red absorption spectra. Thin-layer chromatographic analyses have been carried out to establish the purity of some of the irradiated products. The feasibility or otherwise of radiation sterilization or treatment of the various products from the physicochemical and microbiological (pharmacological) clinical considerations is also described. (author)

  2. Feasibility study: Assess the feasibility of siting a monitored retrievable storage facility

    International Nuclear Information System (INIS)

    King, J.W.

    1993-01-01

    The purpose of phase one of this study are: To understand the waste management system and a monitored retrievable storage facility; and to determine whether the applicant has real interest in pursuing the feasibility assessment process. Contents of this report are: Generating electric power; facts about exposure to radiation; handling storage, and transportation techniques; description of a proposed monitored retrievable storage facility; and benefits to be received by host jurisdiction

  3. Feasibility study: Assess the feasibility of siting a monitored retrievable storage facility. Phase 1

    Energy Technology Data Exchange (ETDEWEB)

    King, J.W.

    1993-08-01

    The purpose of phase one of this study are: To understand the waste management system and a monitored retrievable storage facility; and to determine whether the applicant has real interest in pursuing the feasibility assessment process. Contents of this report are: Generating electric power; facts about exposure to radiation; handling storage, and transportation techniques; description of a proposed monitored retrievable storage facility; and benefits to be received by host jurisdiction.

  4. Expressive writing in patients receiving palliative care: a feasibility study.

    Science.gov (United States)

    Bruera, Eduardo; Willey, Jie; Cohen, Marlene; Palmer, J Lynn

    2008-01-01

    Patients with advanced cancer receiving palliative care often experience severe physical and psychosocial symptoms. However, there are limited resources for psychological and emotional support. Expressive writing has shown decreased anxiety level in young and healthy people suffering from a number of stressors. The purpose of this study was to determine the feasibility of expressive writing in patients receiving palliative care and the most suitable outcomes of expressive writing in this patient population. In this pilot study, patients were randomly assigned to either the expressive writing group (EW) or the neutral writing group (NW). Anxiety level before and after the writing session was compared between the two groups. Writing materials were content analyzed using standard qualitative research methods. A total of 24 patients (12 in EW and 12 in NW) were enrolled in the study between October 2006 and January 2007. Although the majority of patients (83%-100%) were able to complete all baseline assessments, poor adherence was observed during the follow-ups. Only 8% of patients completed the 2-week study. There was no significant difference in the State-Trait Anxiety Inventory (STAI) State-Anxiety scores at baseline, before and after each writing session between the EW and NW groups. Our rapid accrual suggests that palliative care patients are interested in participating in studies such as expressive writing. The high level of adherence to the baseline assessments indicates that these assessments were not particularly difficult for our patients to complete. Future studies may need to include patients with better performance status, better patient education, means of emotional expression (i.e., audio recording, telephone interview) and improved adherence. We conclude that clinical trials of expressive writing in the palliative care setting are not feasible unless they undergo major modification in methods compared to those previous reported in other patient

  5. Verifying FreeRTOS; a feasibility study

    NARCIS (Netherlands)

    Pronk, C.

    2010-01-01

    This paper presents a study on modeling and verifying the kernel of Real-Time Operating Systems (RTOS). The study will show advances in formally verifying such an RTOS both by refinement and by model checking approaches. This work fits in the context of Hoare’s verification challenge. Several

  6. Starr Ranch Renewable Energy Feasibility Study

    Science.gov (United States)

    Starr Ranch Renewable Energy success story is the summary of a renewable energy study by U.S. EPA Region 6. This publication summarizes the analyses to determine appropriate renewable energy options in Starr Ranch.

  7. Wind Generation Feasibility Study in Bethel, AK

    Energy Technology Data Exchange (ETDEWEB)

    Tom Humphrey, YKHC; Lance Kincaid, EMCOR Energy & Technologies

    2004-07-31

    This report studies the wind resources in the Yukon-Kuskokwim Health Corporation (YKHC) region, located in southwestern Alaska, and the applicability of wind generation technologies to YKHC facilities.

  8. Intergenerational mentoring at Men's Sheds: A feasibility study.

    Science.gov (United States)

    Wilson, Nathan J; Cordier, Reinie; Ciccarelli, Marina; MacCallum, Judith; Milbourn, Benjamin; Vaz, Sharmila; Joosten, Annette; Buchanan, Angus; McAuliffe, Tomomi; Stancliffe, Roger J

    2018-01-01

    This study reports on the feasibility of an intergenerational mentoring programme for youth with intellectual disability (ID) aimed at developing skills and building networks. Youth with ID were paired with older male mentors who were trained to support the mentees participate in activities and social interactions during weekly sessions. We interviewed the mentees and mentors, and assessed them on a range of outcomes using standardized measures. Interviews highlighted that the programme presented a great "opportunity" for the mentees and mentors. The participants described facilitators and challenges to the acquisition of practical skills by mentees and the development of relationships between mentors and mentees, including communication, transportation and mentor training. The youth with ID had difficulty completing the self-report measures. Mentoring programmes are viable to support youth with ID during the transition to adulthood; however, refinement is required in the rollout out of a pilot intervention. © 2017 John Wiley & Sons Ltd.

  9. Feasibility study for a transportation operations system cask maintenance facility

    International Nuclear Information System (INIS)

    Rennich, M.J.; Medley, L.G.; Attaway, C.R.

    1991-01-01

    The US Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a waste management program for the disposition of spent nuclear fuel (SNF) and high-level waste (HLW). The program will include a transportation system for moving the nuclear waste from the sources to a geologic repository for permanent disposal. Specially designed casks will be used to safely transport the waste. The cask systems must be operated within limits imposed by DOE, the Nuclear Regulatory Commission (NRC), and the Department of Transportation (DOT). A dedicated facility for inspecting, testing, and maintaining the cask systems was recommended by the General Accounting Office (in 1979) as the best means of assuring their operational effectiveness and safety, as well as regulatory compliance. In November of 1987, OCRWM requested a feasibility study be made of a Cask Maintenance Facility (CMF) that would perform the required functions. 46 refs., 16 figs., 13 tabs

  10. Feasibility study for a transportation operations system cask maintenance facility

    Energy Technology Data Exchange (ETDEWEB)

    Rennich, M.J.; Medley, L.G.; Attaway, C.R.

    1991-01-01

    The US Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a waste management program for the disposition of spent nuclear fuel (SNF) and high-level waste (HLW). The program will include a transportation system for moving the nuclear waste from the sources to a geologic repository for permanent disposal. Specially designed casks will be used to safely transport the waste. The cask systems must be operated within limits imposed by DOE, the Nuclear Regulatory Commission (NRC), and the Department of Transportation (DOT). A dedicated facility for inspecting, testing, and maintaining the cask systems was recommended by the General Accounting Office (in 1979) as the best means of assuring their operational effectiveness and safety, as well as regulatory compliance. In November of 1987, OCRWM requested a feasibility study be made of a Cask Maintenance Facility (CMF) that would perform the required functions. 46 refs., 16 figs., 13 tabs.

  11. Feasibility studies for GPD's measurement at COMPASS

    CERN Document Server

    Marroncle, J

    2004-01-01

    Deeply Virtual Compton Scattering is a clean way to access the Generalized Parton Distributions of the proton. This paper deals with a possibility to perform such an experiment with the COMPASS apparatus which allows to access a large rang in $x_{Bj}$(0.03 to 0.25) and $Q^{2}$(1.5 to 7.5 GeV$^{2}$). A possible design for a recoil detector which is necessary to complement the COMPASS setup, is presented. Preliminary results on exclusive $]rho^{0}$ production from the COMPASS 2002 run are given. They look promising for future studies of deep $\\rho^{0}$ production.

  12. Mined salt storage feasibility: Engineering study report

    International Nuclear Information System (INIS)

    1987-07-01

    This study addresses a method of eliminating the surface storage of mined salt at the Deaf Smith repository site. It provides rough estimates of the logistics and costs of transporting 3.7 million tons of salt from the repository to the salt disposal site near Carlsbad, New Mexico and returning it to the repository for decommissioning backfill. The study assumes that a railcar/truck system will be installed and that the excavated salt will be transported from the repository to an existing potash mine located near Carlsbad, New Mexico approximately 300 miles from the repository. The 3.7 million tons of salt required for repository decommissioning backfill can be stored in the potash mines along with the excess salt, with no additional capital costs required for either a railcar or a truck transportation system. The capital cost for facilities to reclaim the 3.7 million tons of salt from the potash mine is estimated to be $4,400,000 with either a rail or truck transportation system. Segregating the 3.7 million tons of backfill salt in a surface storage area at the potash mine requires a capital cost of $13,900,000 with a rail system or $11,400,000 with a truck system. Transportation costs are estimated at $0.08/ton-mile for rail and $0.13/ton-mile for truck. 2 figs., 5 tabs

  13. High Falls Hydroelectric Plant feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Diezemann, Gustav A.

    1979-07-01

    This study was made in order to determine if re-activating the retired High Falls Hydro Station in New York would result in a more economical generation of some of the power required in the Central Hudson System than is being obtained with the oil-burning thermal plants. The findings show that the construction of a new plant is more economical than rehabilitation of the existing station. All new construction schemes are marginally unattractive at today's costs but are found to become profitable within a short period as alternative energy sources escalate in price. A new powerhouse with an installed capacity of 2390 kW proved most economical, and its construction is recommended.

  14. CsIX/TRU Grout Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    S. J. Losinski; C. M. Barnes; B. K. Grover

    1998-11-01

    A settlement agreement between the Department of Energy (DOE) and the State of Idaho mandates that liquid waste now stored at the Idaho Nuclear Technology Engineering Center (INTEC - formerly the Idaho Chemical Processing Plant, ICPP) will be calcined by the end of year 2012. This study investigates an alternative treatment of the liquid waste that removes undissolved solids (UDS) by filtration and removes cesium by ion exchange followed by cement-based grouting of the remaining liquid into 55-gal drums. Operations are assumed to be from January 2008 through December 2012. The grouted waste will be contact-handled and will be shipped to the Waste Isolation Pilot Plant (WIPP) in New Mexico for disposal. The small volume of secondary wastes such as the filtered solids and cesium sorbent (resin) would remain in storage at the Idaho National Engineering and Environmental Laboratory for treatment and disposal under another project, with an option to dispose of the filtered solids as a r emote-handled waste at WIPP.

  15. CsIX/TRU Grout Feasibility Study

    International Nuclear Information System (INIS)

    Losinski, S. J.; Barnes, C. M.; Grover, B. K.

    1998-01-01

    A settlement agreement between the Department of Energy (DOE) and the State of Idaho mandates that liquid waste now stored at the Idaho Nuclear Technology Engineering Center (INTEC - formerly the Idaho Chemical Processing Plant, ICPP) will be calcined by the end of year 2012. This study investigates an alternative treatment of the liquid waste that removes undissolved solids (UDS) by filtration and removes cesium by ion exchange followed by cement-based grouting of the remaining liquid into 55-gal drums. Operations are assumed to be FR-om January 2008 through December 2012. The grouted waste will be contact-handled and will be shipped to the Waste Isolation Pilot Plant (WIPP) in New Mexico for disposal. The small volume of secondary wastes such as the filtered solids and cesium sorbent (resin) would remain in storage at the Idaho National Engineering and Environmental Laboratory for treatment and disposal under another project, with an option to dispose of the filtered solids as a r emote-handled waste at WIPP

  16. Feasibility study neutron diffraction at IRI

    Energy Technology Data Exchange (ETDEWEB)

    Haan, V.O. de

    1995-06-01

    Although neutron diffraction is a basic and relatively simple technique and should be available at a neutron source, it is not possible to perform neutron diffraction measurements at IRI at this moment. Until recently a neutron diffractometer with a relatively small flux at the sample position and a relaxed resolution (designed for liquid diffraction) was operated at IRI. Due to the modest neutron source intensity and the relatively old design (flat monochromator and single detector) this diffractometer was outdated. However, at a contemporary reactor source an instrument to perform neutron diffraction experiments cannot be missed. This study shows that thanks to recent developments in neutron diffraction optics it is possible to increase the flux, to enhance the resolution and to get a better flexibility. If also the number of detectors is increased or a position-sensitive detector is used to performance can be increased at least a thousand fold. A preliminary design is given to indicate how this gain can be realized. (orig.).

  17. Preliminary feasibility study of modular reactors

    International Nuclear Information System (INIS)

    Yamaji, Kenji

    1987-01-01

    In the future, electric utilities will be required to make a switch-over to a more flexible and dynamic form of power supply due to the slowing growth of power demand, increasing uncertainty, the stagnating economy of increasing scale, the bottleneck of transmission and so on. Nuclear technology would also be required to adapt to this changing environment surrounding its development. The long term prospect of energy demand and nuclear power growth, and the evolution of commercial reactors in Japan are shown. The design of 1,300 MWe advanced LWRs has been completed, and as the reactors of next generation, the ultralarge LWRs of 1,500 - 1,800 MWe are suggested. However, there can be an alternative future for nuclear power development, and in this paper, the possibility for altering the image of conventional nuclear power technology by developing modular reactors which are economical even at small capacity, and can be sited in urban areas just like conventional thermal power plants is examined. The factors for the economical evaluation of modular reactors, learning effect and scale effect on the economy, the case study on a modular high temperature reactor designed by Interatom-GHT, and the possibility of siting in urban areas due to the system of inherent safety are reported. (Kako, I.)

  18. Feasibility study of tank leakage mitigation using subsurface barriers

    Energy Technology Data Exchange (ETDEWEB)

    Treat, R.L.; Peters, B.B.; Cameron, R.J.; McCormak, W.D.; Trenkler, T.; Walters, M.F. [Ensearch Environmental, Inc. (United States); Rouse, J.K.; McLaughlin, T.J. [Bovay Northwest, Inc., Richland, WA (United States); Cruse, J.M. [Westinghouse Hanford Co., Richland, WA (United States)

    1994-09-21

    The US Department of Energy (DOE) has established the Tank Waste Remediation System (TWRS) to satisfy manage and dispose of the waste currently stored in the underground storage tanks. The retrieval element of TWRS includes a work scope to develop subsurface impermeable barriers beneath SSTs. The barriers could serve as a means to contain leakage that may result from waste retrieval operations and could also support site closure activities by facilitating cleanup. Three types of subsurface barrier systems have emerged for further consideration: (1) chemical grout, (2) freeze walls, and (3) desiccant, represented in this feasibility study as a circulating air barrier. This report contains analyses of the costs and relative risks associated with combinations retrieval technologies and barrier technologies that from 14 alternatives. Eight of the alternatives include the use of subsurface barriers; the remaining six nonbarrier alternative are included in order to compare the costs, relative risks and other values of retrieval with subsurface barriers. Each alternative includes various combinations of technologies that can impact the risks associated with future contamination of the groundwater beneath the Hanford Site to varying degrees. Other potential risks associated with these alternatives, such as those related to accidents and airborne contamination resulting from retrieval and barrier emplacement operations, are not quantitatively evaluated in this report.

  19. Feasibility study of tank leakage mitigation using subsurface barriers

    International Nuclear Information System (INIS)

    Treat, R.L.; Peters, B.B.; Cameron, R.J.; McCormak, W.D.; Trenkler, T.; Walters, M.F.; Rouse, J.K.; McLaughlin, T.J.; Cruse, J.M.

    1994-01-01

    The US Department of Energy (DOE) has established the Tank Waste Remediation System (TWRS) to satisfy manage and dispose of the waste currently stored in the underground storage tanks. The retrieval element of TWRS includes a work scope to develop subsurface impermeable barriers beneath SSTs. The barriers could serve as a means to contain leakage that may result from waste retrieval operations and could also support site closure activities by facilitating cleanup. Three types of subsurface barrier systems have emerged for further consideration: (1) chemical grout, (2) freeze walls, and (3) desiccant, represented in this feasibility study as a circulating air barrier. This report contains analyses of the costs and relative risks associated with combinations retrieval technologies and barrier technologies that from 14 alternatives. Eight of the alternatives include the use of subsurface barriers; the remaining six nonbarrier alternative are included in order to compare the costs, relative risks and other values of retrieval with subsurface barriers. Each alternative includes various combinations of technologies that can impact the risks associated with future contamination of the groundwater beneath the Hanford Site to varying degrees. Other potential risks associated with these alternatives, such as those related to accidents and airborne contamination resulting from retrieval and barrier emplacement operations, are not quantitatively evaluated in this report

  20. A preliminary feasibility study on natural analogue in Korea

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chun Soo; Bae, Dae Seok; Kim, Kyung Su; Koh, Yong Kwon; Park, Byung Yun

    2000-03-01

    Preliminary study on the assessment of natural analogue study in Korea for the deep geological disposal of high-level radioactive waste was carried out. The project on natural analogue study in other countries are introduced. The uranium-bearing deposit in Okcheon belt are summarized, which reported to be uranium-bearing minerals in order to assess to feasibility for natural analogue study in Korea. Among the uranium-bearing deposits, the Deokpyeong area, reported to be the highest reservoir and grade, are selected as the study site, and the elementary investigation, including survey of radioactivity and geochemistry are carried out. According to the investigation of surface environment, the radioactivity and uranium content in the surface water and shallow groundwater does not show any anormal values. However, the radioactivity is expected to be increased in depth and the groundwater reacted with uranium-bearing graphite formation shows high unanium content, indicating the potential possibility for natural analogue study in Korea. In future, if more detail study are performed, the assessment of natural analogue study in Korea are expected.

  1. Preparation of a Feasibility Study for New Nuclear Power Projects

    International Nuclear Information System (INIS)

    2014-01-01

    A feasibility study represents an important step in the development of a new build nuclear power plant project. It is a complex but necessary step to determine whether a business opportunity is possible, practical and viable. Technical, economical, financial, regulatory, social, environmental aspects of a nuclear power plant programme need to be considered to allow authorities to make informed decisions regarding the possible implementation of the project This publication assists Member States in developing a feasibility study for nuclear power projects and provides guidance to users who are planning to perform such a study, with consideration of both the technical and process areas. These guidelines condense the experience of individuals involved in previous feasibility study efforts and provide industry best practices in order to maximize the usefulness of any results

  2. The environmental energy sector programme. Poland: Feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The Danish Ministry of Energy has granted financial aid to the preparation of a feasibility study necessary for the procurement of a financial solution to the modernisation of the combined heat and power plant in the city of Zielona Gora.The overall objectives of the Feasibility Study are to: establish new efficient power capacity in the south-west region of Poland, increase the energy efficiency, reduce the impact on the environment, utilise the local natural gas available which cannot be used in the national gas grid and reduce the costs of energy supply.The specific objective of this feasibility study is to obtain the best possible financing of the erection of a new CPH plant in Zielona Gora. The plant shall be designed to utilise the local resources of natural gas and to supply heat to the district heating grid in accordance with long-term planning strategies. (EHS)

  3. Conducting feasibilities in clinical trials: An investment to ensure a good study

    Directory of Open Access Journals (Sweden)

    Viraj Rajadhyaksha

    2010-01-01

    Full Text Available Conducting clinical trial feasibility is one of the first steps in clinical trial conduct. This process includes assessing internal and environmental capacity, alignment of the clinical trial in terms of study design, dose of investigational product, comparator, patient type, with the local environment and assessing potential of conducting clinical trial in a specific country. A robust feasibility also ensures a realistic assessment and capability to conduct the clinical trial. For local affiliates of pharmaceutical organizations, and contract research organizations, this is a precursor to study placement and influences the decision of study placement. This article provides details on different types of feasibilities, information which is to be included and relevance of each. The article also aims to provide practical hands-on suggestions to make feasibilities more realistic and informative.

  4. Civil Engineering Feasibility Studies for Future Ring Colliders at CERN

    CERN Document Server

    Bruning, O; Myers, S; Osborne, J; Rossi, L; Waaijer, C; Zimmermann, F

    2013-01-01

    CERN civil engineers are studying the feasibility of several potential ring colliders to complement the LHC: an 80km circular tunnel to house the TLEP and VHE-LHC, and the ring-ring and linac-ring options for the LHeC. The feasibility of these projects is largely dependent on civil design and geotechnical and environmental risks. As civil infrastructure works typically represent one third of the cost of major physics projects, it is critical that the construction costs are well understood from the conceptual stage. This proceeding presents the first results of the feasibility studies for the 80km tunnel and the linac-ring LHeC. Presented at IPAC'13 Shanghai, 12-17 May 2013

  5. Feasibility Study and Optimization of An Hybrid System (Eolian ...

    African Journals Online (AJOL)

    Feasibility Study and Optimization of An Hybrid System (Eolian- Photovoltaic - Diesel) With Provision of Electric Energy Completely Independent. ... reducing emissions of greenhouse gas (CO2 rate = 16086 kg / year for a system using only the generator diesel and is 599 kg / year for the stand alone hybrid system studied).

  6. MICROCRM: Feasibility certification studies of microbiological reference materials

    NARCIS (Netherlands)

    Mooijman KA; Nagelkerke NJD; Demarquilly C; Lemdani M; Stewardson D; Fouweather T; Lightfoot N; Simonart T; MGB

    2004-01-01

    In 2002 feasibility certification studies were carried out on three different types of microbiological reference materials for eight different ISO and EN standard methods, related to EU water legislation (Drinking-water Directive and Bathing-water Directive). These studies were performed as part of

  7. Reflection seismology systems for planetary geology : A feasibility study

    NARCIS (Netherlands)

    Batenburg, P.A.W.; Gill, E.K.A.; Drijkoningen, G.G.; Foing, B.H.; Toxopeus, G.

    2009-01-01

    A feasibility study is conducted to determine whether reflection seismology systems can be used for planetary geology research. The focus is on systems with up to 20,000 seismic detectors, such as used today in Earth geological research and energy companies. The study follows a top-down systems

  8. Deschutes estuary feasibility study: hydrodynamics and sediment transport modeling

    Science.gov (United States)

    George, Douglas A.; Gelfenbaum, Guy; Lesser, Giles; Stevens, Andrew W.

    2006-01-01

    Continual sediment accumulation in Capitol Lake since the damming of the Deschutes River in 1951 has altered the initial morphology of the basin. As part of the Deschutes River Estuary Feasibility Study (DEFS), the United States Geological Survey (USGS) was tasked to model how tidal and storm processes will influence the river, lake and lower Budd Inlet should estuary restoration occur. Understanding these mechanisms will assist in developing a scientifically sound assessment on the feasibility of restoring the estuary. The goals of the DEFS are as follows. - Increase understanding of the estuary alternative to the same level as managing the lake environment.

  9. Front Range Forest Health Partnership Phase 1 feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Volkin, P

    1998-09-01

    The Front Range Forest Health Partnership is an alliance of individuals, citizen groups, federal, state, private, and nonprofit organizations that formed to promote forest health restoration and reduce fire risks on Colorado's Front Range. The partnership promotes selective thinning to restore forest health and supports economically feasible end uses for wood waste materials. The Phase I study was initiated to determine the environmental and economic feasibility of using wood wastes from forested and urban areas for the production of fuel-grade ethanol.

  10. Increasing fruits and vegetables in midlife women: a feasibility study.

    Science.gov (United States)

    Gunn, Caroline A; Weber, Janet L; Coad, Jane; Kruger, Marlena C

    2013-07-01

    The positive link between bone health and fruit/vegetable consumption has been attributed to the lower renal acid load of a diet high in alkaline-forming fruit/vegetables. Other important dietary determinants of bone health include micronutrients and bioactives found in fruit/vegetables. We hypothesized that increased intake of fruit/vegetables to 9 or more servings a day would lower net endogenous acid production (NEAP) significantly (~20 mEq/d) and increase urine pH (0.5 pH units). This 8-week feasibility study investigated if 21 midlife women (age, 40-65 years) currently consuming 5 or less servings a day of fruit/vegetables could increase their intake to 9 or more servings a day to substantially lower NEAP and include specific vegetables daily. Three-day diet diaries were completed at baseline and the end of the study and assessed for NEAP (estimated) and number of servings from all food groups. Urine pH dipsticks were provided for the participants to assess and record their fasting urine pH daily (second void). Seventy-six percent of women achieved the study aim, which was to increase to 9 or more servings of fruit/vegetables for at least 5 d/wk. There was a reduction in the number of bread/cereal servings. Net endogenous acid production (estimated) was reduced significantly, with a mean urine pH increase of 0.68 pH units (95% confidence interval, 0.46-1.14); however, daily urine pH measures showed high variability. This study demonstrated that a group of midlife women can change their diet for 8 weeks by significantly increasing fruit/vegetable servings and include specific "bone friendly" vegetables daily, resulting in a significant decrease in estimated dietary NEAP and an increase in urine pH. Copyright © 2013 Elsevier Inc. All rights reserved.

  11. Sitewide feasibility study Eielson Air Force Base, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Last, G.V.; Lanigan, D.C.; Josephson, G.B.; Bagaasen, L.M.

    1995-09-01

    The Sitewide Feasibility Study (FS) is required under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), the National Contingency Plan (NCP), and the Federal Facility Agreement (FFA) for Eielson Air Force Base (AFB). It is based on findings presented in the Sitewide Remedial Investigation (RI) Report (USAF 1995a), and the Sitewide Baseline Risk Assessment (BLRA) Report (USAF 1995b). Under the FFA, 64 potential source areas were placed in one of six operable units, based on similar contaminant and environmental characteristics, or were included for evaluation under a Source Evaluation Report (SER). The sitewide RI was directed at contamination that was not confined to an operable unit (OU) or SER source area. The objectives of the sitewide RI were to: Provide information about site characteristics to support individual OU RI/FS efforts and the sitewide RI/FS, including site hydrogeology and determination of background soil and groundwater characteristics; identify and characterize contamination that is not confined or attributable to a specific source area through sitewide monitoring of groundwater and surface water; evaluate cumulative risks to human health and the environment from contamination on a sitewide basis; and provide a mechanism for continued cohesive sitewide monitoring.

  12. Feasibility study on the acquisition of licensee event data

    International Nuclear Information System (INIS)

    Kato, W.Y.; Hall, R.E.; Teichmann, T.; Taylor, J.; Luckas, W.J. Jr.; Saha, P.; Samanta, P.; Fragola, J.

    1983-01-01

    Objective of the study was to assess the feasibility of modifying the LER reporting system as proposed by NRC-AEOD, and/or developing an alternative plan that would in addition collect information about significant events amenable to statistical analysis, such as multi-case, multi-variate analysis. The study indicated that the LERs constitute reports from a large variety of events which have in most cases many different plant parameters, both measured and currently not measured, to characterize the event. In order to determine event-specific plant parameters required for statistical and deterministic analysis, a data matrix approach was used to identify those parameters which are currently being recorded, those which could be measured and recorded, and those which are required for certain types of events involving thermal-hydraulics and neutronics as illustrative of events requiring in-depth analysis. Also included in the study was a review of INPO's Nuclear Plant Reliability Data System; NASA's Problem Reporting and Corrective Action (PRACA) program; Electricite de France's KIT system, an automatic computer-based reactor parameter monitoring and recording system; and the regulatory relationship between the FAA and the commercial airline industry

  13. The environmental energy sector programme. Poland: Appendices to feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The appendices contain Energy Law, Act of 10 April 1997 and also more specific details from the feasibility study for the procurement of a financial solution to the modernisation of the combined heat and power plant in the city of Zielona Gora, Poland. (EHS)

  14. Staging and storage facility feasibility study. Final report

    International Nuclear Information System (INIS)

    Swenson, C.E.

    1995-02-01

    This study was performed to investigate the feasibility of adapting the design of the HWVP Canister Storage Building (CSB) to meet the needs of the WHC Spent Nuclear Fuel Project for Staging and Storage Facility (SSF), and to develop Rough Order of Magnitude (ROM) cost and schedule estimates

  15. Hadoop for EEG Storage and Processing: A Feasibility Study

    NARCIS (Netherlands)

    Berrada, Ghita; van Keulen, Maurice; Habib, Mena Badieh; Slezak, Dominik; Tan, Ah-Hwee; Peters, James F.; Schwabe, Lars

    Lots of heterogeneous complex data are collected for diagnosis purposes. Such data should be shared between all caregivers and, often at least partly automatically processed, due to its complexity, for its full potential to be harnessed. This paper is a feasibility study that assesses the potential

  16. Vessel electrification feasibility study for the New York state canals.

    Science.gov (United States)

    2013-10-01

    The objective of this study was to determine the technical and economic feasibility of repowering a diesel-fueled : New York State Canal Corporation (NYSCC) work boat with a diesel hybrid-electric or full-electric powertrain. : The project team instr...

  17. Feasibility Study of the Social Enterprise Intervention with Homeless Youth

    Science.gov (United States)

    Ferguson, Kristin M.; Xie, Bin

    2008-01-01

    Objective: To reduce mental health symptoms and high-risk behaviors and increase social support and service utilization among street-living youth, the authors conducted a pilot study to assess the feasibility of the social enterprise intervention (SEI) at a homeless youth agency. Method: Convenience sampling was used to recruit 16 street-living…

  18. Feasibility Studies for International Airport Development in the Far East.

    Science.gov (United States)

    Nixon, John H.

    In this report, two feasibility studies for international airports in the Far East, at Jakarta, Indonesia, and at Hong Kong, are described. For each situation, questions concerning the utilization and development of available facilities, future needs, and sources of finance were among questions investigated. This paper describes steps involved in…

  19. Finalization of the feasibility study for Rocky Mountain arsenal

    International Nuclear Information System (INIS)

    Parks, D.M.; Amdurer, M.

    1994-01-01

    The environmental remediation program at the Army's premier cleanup site, Rocky Mountain Arsenal, is fast approaching the climax of the study phase and will be moving into the cleanup phase. Selecting the cleanup approach for this extremely complex site involves addressing a number of precedent-setting issues. The Remedial Investigation (RI) for this 27-sq. mile former Army chemical munitions and commercial pesticide manufacturing facility, completed in January 1992, included the collection of over 50,000 samples from soil, surface water, groundwater, structures, air and plants and animals. Samples were analyzed for over 60 specific chemical analytes and screened for hundreds of others. The RI found a number of contaminated groundwater plumes, hundreds of contaminated structures, high concentrations of contaminants in soils in former disposal basins and manufacturing areas and buried munitions. Some of the major contaminants targeted for remediation include benzene, chloroform, tetrachloroethylene, dibromochloropropane, diisopropylmethyl phosphonate, aldrin, adieldrin, isodrin, chlordane, lead, arsenic and mercury. The Feasibility Study (FS) has reviewed potential remediation alternatives. The first phase of the FS, the Development and Screening of Alternatives (DSA) presented a range of alternatives. An equally complex and parallel study, the Integrated Endangerment Assessment, is in final stages. The goal of the second phase of the FS, the Detailed Analysis of Alternatives (DAA), is to analyze the soils, water and structures alternatives retained in the DSA in greater technical detail. The Army's draft version of the DAA, released in the Fall of 1993, has proposed a wide range of alternatives to remediate 27 different contamination groups and is included in the presentation

  20. Feasibility Study of a Lunar Analog Bed Rest Model

    Science.gov (United States)

    Cromwell, Ronita L.; Platts, Steven H.; Yarbough, Patrice; Buccello-Stout, Regina

    2010-01-01

    The purpose of this study was to determine the feasibility of using a 9.5deg head-up tilt bed rest model to simulate the effects of the 1/6 g load to the human body that exists on the lunar surface. The lunar analog bed rest model utilized a modified hospital bed. The modifications included mounting the mattress on a sled that rolled on bearings to provide freedom of movement. The weight of the sled was off-loaded using a counterweight system to insure that 1/6 body weight was applied along the long axis (z-axis) of the body. Force was verified through use of a force plate mounted at the foot of the bed. A seating assembly was added to the bed to permit periods of sitting. Subjects alternated between standing and sitting positions throughout the day. A total of 35% of the day was spent in the standing position and 65% was spent sitting. In an effort to achieve physiologic fluid shifts expected for a 1/6 G environment, subjects wore compression stockings and performed unloaded foot and ankle exercises. Eight subjects (3 females and 5 males) participated in this study. Subjects spent 13 days in the pre-bed rest phase, 6 days in bed rest and 3 days post bed rest. Subjects consumed a standardized diet throughout the study. To determine feasibility, measures of subject comfort, force and plasma volume were collected. Subject comfort was assessed using a Likert scale. Subjects were asked to assess level of comfort (0-100) for 11 body regions and provide an overall rating. Results indicated minimal to no discomfort as most subjects reported scores of zero. Force measures were performed for each standing position and were validated against subject s calculated 1/6 body weight (r(sup 2) = 0.993). The carbon monoxide rebreathing technique was used to assess plasma volume during pre-bed rest and on the last day of bed rest. Plasma volume results indicated a significant decrease (p = 0.001) from pre to post bed rest values. Subjects lost on average 8.3% (sd = 6.1%) during the

  1. Structural Design Feasibility Study for the Global Climate Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Lewin,K.F.; Nagy, J.

    2008-12-01

    Neon, Inc. is proposing to establish a Global Change Experiment (GCE) Facility to increase our understanding of how ecological systems differ in their vulnerability to changes in climate and other relevant global change drivers, as well as provide the mechanistic basis for forecasting ecological change in the future. The experimental design was initially envisioned to consist of two complementary components; (A) a multi-factor experiment manipulating CO{sub 2}, temperature and water availability and (B) a water balance experiment. As the design analysis and cost estimates progressed, it became clear that (1) the technical difficulties of obtaining tight temperature control and maintaining elevated atmospheric carbon dioxide levels within an enclosure were greater than had been expected and (2) the envisioned study would not fit into the expected budget envelope if this was done in a partially or completely enclosed structure. After discussions between NEON management, the GCE science team, and Keith Lewin, NEON, Inc. requested Keith Lewin to expand the scope of this design study to include open-field exposure systems. In order to develop the GCE design to the point where it can be presented within a proposal for funding, a feasibility study of climate manipulation structures must be conducted to determine design approaches and rough cost estimates, and to identify advantages and disadvantages of these approaches including the associated experimental artifacts. NEON, Inc requested this design study in order to develop concepts for the climate manipulation structures to support the NEON Global Climate Experiment. This study summarizes the design concepts considered for constructing and operating the GCE Facility and their associated construction, maintenance and operations costs. Comparisons and comments about experimental artifacts, construction challenges and operational uncertainties are provided to assist in selecting the final facility design. The overall goal

  2. Feasibility study on small modular reactors for modern microgrids

    International Nuclear Information System (INIS)

    Islam, R.; Gabbar, H.A.

    2013-01-01

    Microgrid is a solution of conventional power grid problem and offer sustainable decentralized power system. Microgrid with modern distributed energy resources (DER) could play an important role to alleviate dependency on the main electricity grid. Distributed energy resource comprises wind turbine, solar photovoltaic, diesel generator, gas engine, micro turbine, fuel cells, etc.Due to the gap between typical loads and supply within microgrid, larger scale energy generation could provide a possible solution to balance power demand and supply. Feasibility study of Small Nuclear Power Plant, such as Small Modular reactor (SMR), within microgrids could be achieved via different cases. To achieve the target, a comprehensive feasibility study is conducted on microgrid with SMR through electricity generation profiles, geographical and environmental assessment, as well as cost analysis using simulation practices and data analysis.Also potency of SMRs is analyzed. Parameters and Key Performance Indicators (KPIs) could be analyzed to achieve feasible solution of microgrids with small modular reactor (SMR) to improve the overall microgrid performance.The study shows that SMR could be a feasible solution if microgrid parameters are selected properly. (author)

  3. Istra district heating system. Master plan and feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-01

    This report presents the results of the Feasibility Study of options for improving the efficiency and operating economy of Istra Large-Scale Demonstration Project includes all areas of the town of Istra. However, the Feasibility Study is confined to the five largest adjoining boilers plant areas within the borders of Istra town. The study was conducted from 1999 to 2001 and was based on information collected during this period. The city administration and the district heating company in Istra provided the data. The company RDIEE, Russian Danish Institute for Energy Efficiency, in Istra collected and processed the data under the conduction of Carl Bro a/s in Denmark. The main objectives of the study are to provide the Istra DHC with a number of options for future development of the district heating system based on technical/financial analyses and presenting the best possibilities for improved comfort, operation and business development. More concretely, one or more system improvement scenarios, which can be implemented in the near future as a first step of the recommended medium-term to long-term development, are identified. Another important objective has been to train the specialists of RDIEE in the feasibility study process and to transfer know-how, skills and tools. The model used for this study is adapted to the features and the special problems to be addressed in relation to the Istra district heating system. RDIEE and Istra DHC are thereby provided with a useful tool which may be used for continued study and development after the first phase project has been completed. As usual in the case of input/output models the quality of the results depends very much on the quality of input data. The present report is exclusively based on the consultant's understanding of the provided information. The results and the underlying inputs should be carefully considered before any final decision concerning implementation is taken. Verification of assumptions should also

  4. Feasibility Pilot Study: Training Soft Skills in Virtual Worlds.

    Science.gov (United States)

    Abshier, Patricia

    2012-04-01

    In a world where funding is limited, training for healthcare professionals is turning more and more to distance learning in an effort to maintain a knowledgeable and skilled work force. In 2010, Cicatelli Associates, Inc. began exploring the feasibility of using games and virtual worlds as an alternative means to teach skills-training in a distance-learning environment. The pilot study was conducted with six individuals familiar with general counseling and communication skills used by the healthcare industry to promote behavior change. Participants reported that the venue, although challenging at first, showed great potential for use with healthcare providers, as it allowed for more interaction and activities than traditional Webinars. However, there are significant limitations that must be overcome in order for this healthcare training modality to be utilized on a large scale. These limitations included a lack of microgestures and issues regarding the technology being used. In spite of the limitations, however, the potential use of virtual worlds for the training of healthcare providers exists and should be researched further. This article discusses the need and intended benefits of virtual world training as well as the results and conclusions of the pilot study.

  5. Feasibility study for Boardman River hydroelectric power. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-02-22

    The feasibility of generating additional hydroelectric power from five consecutive existing dams located on the Boardman River in Grand Traverse County and Traverse City, Michigan, was investigated. The potential hydropower production capabilities, in terms of base load power and peak load power, the legal-institutional-environmental constraints, and the economic feasibility, including capital investment, operating costs and maintenance costs, were evaluated for each of the five dam sites individually and as a series of co-dependent facilities. The impact of installing fish passages at each site was analyzed separately. The feasibility assessment utilized the present worth analytical method, considering revenue based on thirty mills/kWh for power, 0.4% general economy escalation rate, and a 6% net income to the municipal utility. The sensitivity of fuel costs increasing at a different rate than the general price-escalation was tested by allowing the increase in fuel costs to vary from 3 to 8% per year. Assuming fuel costs increase at the same rate as the general economy, it is feasible to update, retrofit, renovate, and install hydroelectric generating capacity at Sabin, Boardman and Brown Bridge. Rehabilitation of Union Street and Keystone is also feasible but somewhat less attractive. Operating the dams as a co-dependent system has environmental advantages and can provide additional revenue through peak load power rates. A development plan to implement the above is outlined utilizing an ownership arrangement whereby Grand Traverse County provides easements for Sabin and Boardman Dams. The plan calls for operation of the system by Traverse City.

  6. Computed tomography with energy-resolved detection: a feasibility study

    Science.gov (United States)

    Shikhaliev, Polad M.

    2008-03-01

    The feasibility of computed tomography (CT) with energy-resolved x-ray detection has been investigated. A breast CT design with multi slit multi slice (MSMS) data acquisition was used for this study. The MSMS CT includes linear arrays of photon counting detectors separated by gaps. This CT configuration allows for efficient scatter rejection and 3D data acquisition. The energy-resolved CT images were simulated using a digital breast phantom and the design parameters of the proposed MSMS CT. The phantom had 14 cm diameter and 50/50 adipose/glandular composition, and included carcinoma, adipose, blood, iodine and CaCO3 as contrast elements. The x-ray technique was 90 kVp tube voltage with 660 mR skin exposure. Photon counting, charge (energy) integrating and photon energy weighting CT images were generated. The contrast-to-noise (CNR) improvement with photon energy weighting was quantified. The dual energy subtracted images of CaCO3 and iodine were generated using a single CT scan at a fixed x-ray tube voltage. The x-ray spectrum was electronically split into low- and high-energy parts by a photon counting detector. The CNR of the energy weighting CT images of carcinoma, blood, adipose, iodine, and CaCO3 was higher by a factor of 1.16, 1.20, 1.21, 1.36 and 1.35, respectively, as compared to CT with a conventional charge (energy) integrating detector. Photon energy weighting was applied to CT projections prior to dual energy subtraction and reconstruction. Photon energy weighting improved the CNR in dual energy subtracted CT images of CaCO3 and iodine by a factor of 1.35 and 1.33, respectively. The combination of CNR improvements due to scatter rejection and energy weighting was in the range of 1.71-2 depending on the type of the contrast element. The tilted angle CZT detector was considered as the detector of choice. Experiments were performed to test the effect of the tilting angle on the energy spectrum. Using the CZT detector with 20° tilting angle decreased the

  7. Feasibility study on production of Co-60 in PHWR

    International Nuclear Information System (INIS)

    Park, Kyung Bae; Han, Hyon Soo; Joo, Po Kook

    2000-05-01

    The purpose of this study is to analyze the safeties and the economics for Co-60 production from Wolsung PHWR and to verify the feasibility on the manufacturing of the final Co-60 source for industrial irradiation. The feasibility of reactor conversion was carried out with KEPCO collaboration. Through the site survey on the experience of Gentililly-2 in Canada, a feasibility of plant conversion, changes in design, equipment and tools for Co-60 production was verified. It was estimated that the reactor conversion would not impose adverse impact on plant safety. For the encapsulation of radiation source and storage of the final products, a modification of concrete hot cell at KAERI was primary concerns. The installation and improvement of facilities are needed to avoid cross contamination and extra radiation exposure. Main items for these are pressure gauge, separated HEPA filter the ceiling separation, extra-shielding and ceiling hoist system. At present, storage pool has got admission based on 400 kCi. But it is necessary to seismic analysis and design improvement of shielding to store 10 MCi (Co-60) which is the estimated Co-60 capacity produced by 3 PHWRs. According to present investigation, a production of Co-60 by PHWR and RIPE was seemed to be an economically feasible business and it was also expected that a joint venture will be able to realize by cooperation with MDS Nordion Co

  8. Feasibility study on production of Co-60 in PHWR

    Energy Technology Data Exchange (ETDEWEB)

    Park, Kyung Bae; Han, Hyon Soo; Joo, Po Kook

    2000-05-01

    The purpose of this study is to analyze the safeties and the economics for Co-60 production from Wolsung PHWR and to verify the feasibility on the manufacturing of the final Co-60 source for industrial irradiation. The feasibility of reactor conversion was carried out with KEPCO collaboration. Through the site survey on the experience of Gentililly-2 in Canada, a feasibility of plant conversion, changes in design, equipment and tools for Co-60 production was verified. It was estimated that the reactor conversion would not impose adverse impact on plant safety. For the encapsulation of radiation source and storage of the final products, a modification of concrete hot cell at KAERI was primary concerns. The installation and improvement of facilities are needed to avoid cross contamination and extra radiation exposure. Main items for these are pressure gauge, separated HEPA filter the ceiling separation, extra-shielding and ceiling hoist system. At present, storage pool has got admission based on 400 kCi. But it is necessary to seismic analysis and design improvement of shielding to store 10 MCi (Co-60) which is the estimated Co-60 capacity produced by 3 PHWRs. According to present investigation, a production of Co-60 by PHWR and RIPE was seemed to be an economically feasible business and it was also expected that a joint venture will be able to realize by cooperation with MDS Nordion Co.

  9. Revised CTUIR Renewable Energy Feasibility Study Final Report

    Energy Technology Data Exchange (ETDEWEB)

    John Cox; Thomas Bailor; Theodore Repasky; Lisa Breckenridge

    2005-10-31

    This preliminary assessment of renewable energy resources on the Umatilla Indian Reservation (UIR) has been performed by CTUIR Department of Science and Engineering (DOSE). This analysis focused primarily identifying renewable resources that may be applied on or near the Umatilla Indian Reservation. In addition preliminary technical and economic feasibility of developing renewable energy resources have been prepared and initial land use planning issues identified. Renewable energies examined in the course of the investigation included solar thermal, solar photovoltaic, wind, bioethanol, bio-diesel and bio-pellet fuel. All renewable energy options studied were found to have some potential for the CTUIR. These renewable energy options are environmentally friendly, sustainable, and compliment many of the policy goals of the CTUIR. This report seeks to provide an overall review of renewable energy technologies and applications. It tries to identify existing projects near to the CTUIR and the efforts of the federal government, state government and the private sector in the renewable energy arena. It seeks to provide an understanding of the CTUIR as an energy entity. This report intends to provide general information to assist tribal leadership in making decisions related to energy, specifically renewable energy deve lopment.

  10. Proceedings of the remedial investigation/feasibility study workshop

    International Nuclear Information System (INIS)

    1988-12-01

    The objective of this workshop was to familiarize Department of Energy (DOE) personnel and contractors with all aspects of developing, managing, and conducting an RI/FS, based on HAZWRAP SCO experience in similar activities as part of the Installation Restoration program (IRP). The HAZWRAP SCO participation in Department of Defense (DOD) restoration activities provides an opportunity to develop capability and experience which are transferable to DOE activities. Paul Franco, Program Manager for the IRP, provided an overview of the IRP experience in conducting an RI/FS for a National Priorities List (NPL) site and a non-NPL site. A non-NPL site does not require an RI/FS by regulation; however, the RI/FS process can be used to determine whether to proceed with a feasibility study or terminate the action with a decision document. Al Porell, Program Manager for ICP, discussed the use of decision documents to remove non-NPL sites from regulatory consideration. DOE-Idaho has used similar documentation to remove numerous sites from their list of potential remedial action sites. Mr. Porell also discussed the use of the Technical Review Committee (TRC), which is established to coordinate activities during the RI/FS process. The TRC includes state, local, and federal authorities, and Air Force installation personnel

  11. Moving with music for stroke rehabilitation: a sonification feasibility study.

    Science.gov (United States)

    Scholz, Daniel S; Rhode, Sönke; Großbach, Michael; Rollnik, Jens; Altenmüller, Eckart

    2015-03-01

    Gross-motor impairments are common after stroke, but efficacious and motivating therapies for these impairments are scarce. We present a novel musical sonification therapy especially designed to retrain gross-motor functions. Four stroke patients were included in a clinical pre-post feasibility study and were trained with our sonification training. Patients' upper-extremity functions and their psychological states were assessed before and after training. The four patients were subdivided into two groups, with both groups receiving 9 days of musical sonification therapy (music group, MG) or a sham sonification training (control group, CG). The only difference between these training protocols was that, in the CG, no sound was played back. During the training the patients initially explored the acoustic effects of their arm movements, and at the end of the training the patients played simple melodies by moving their arms. The two patients in the MG improved in nearly all motor function tests after the training. They also reported in the stroke impact scale, which assesses well-being, memory, thinking, and social participation, to be less impaired by the stroke. The two patients in the CG did benefit less from the movement training. Taken together, musical sonification may be a promising therapy for impairments after stroke. © 2015 New York Academy of Sciences.

  12. Identifying the educational needs of menopausal women: a feasibility study.

    Science.gov (United States)

    Trudeau, Kimberlee J; Ainscough, Jessica L; Trant, Meredith; Starker, Joan; Cousineau, Tara M

    2011-01-01

    The goal of this project was to identify the educational needs of menopausal women and test the feasibility of an online self management program based on social learning theory. The four stages included 1) a needs assessment using a) focus groups with 24 women ages 40 to 55 and b) phone interviews with eight health experts; 2) the use of concept mapping methodology for quantifying qualitative data from stage 1 to identify the core programmatic concepts; 3) development of a demonstration program; and 4) a pilot study with 35 women and 9 health experts to assess knowledge gained and program satisfaction. Results show that women desire more information about normalcy of menopause and symptom management and found the program to meet a need for menopausal education otherwise perceived as unavailable. The women significantly increased their menopausal knowledge after brief exposure (t(34) = 3.64; p = .001). This project provides support for an online health education program for menopausal women and content ideas for inclusion in women's health education curriculum. Copyright © 2011 Jacobs Institute of Women's Health. Published by Elsevier Inc. All rights reserved.

  13. Duet for menstrual protection: a feasibility study in Zimbabwe.

    Science.gov (United States)

    Averbach, Sarah; Sahin-Hodoglugil, Nuriye; Musara, Petina; Chipato, Tsungai; van der Straten, Ariane

    2009-06-01

    Managing menses is a challenge for women in developing countries. Duet is a cervical barrier being developed for contraception and STI prevention. We explored the hypothetical acceptability of using Duet as a menstrual cup, among Zimbabwean women. A survey and focus group discussions (FGD) were conducted with 43 women aged 18-45 years to gain information about their menstrual practices and attitudes regarding the use of Duet for menstrual protection. All 43 women reported that if Duet were available, they would "definitely" try it, and that it was "very important" that Duet is low cost and easy to clean; 86% reported that using it would make a difference in their lives. FGD findings highlighted unhygienic practices due to the lack of affordable options for menstrual management and a genuine interest in Duet, including its potential use for multiple purposes (contraception, disease prevention and menstrual protection). Accessing affordable and hygienic menstrual protection was a problem for these Zimbabwean women. Duet appeared acceptable and it would be feasible to conduct a user-acceptability study of Duet as a menstrual cup in Zimbabwe.

  14. Functional neuroimaging Using UWB Impulse Radar: a feasibility study

    OpenAIRE

    Lauteslager, T; Nicolaou, N; Lande, TS; Constandinou, TG

    2016-01-01

    Microwave imaging is a promising new modality for studying brain function. In the current paper we assess the feasibility of using a single chip implementation of an ultra- wideband impulse radar for developing a portable and low-cost functional neuroimaging device. A numerical model is used to predict the level of attenuation that will occur when detecting a volume of blood in the cerebral cortex. A phantom liquid is made, to study the radar?s performance at different attenuation levels. Alt...

  15. Dry Falls Dam potential hydroelectric power. Feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    HOsey, Harry P.

    1979-01-01

    The feasibility of constructing a low-head hydroelectric power plant at the existing Dry Falls Dam in Washington was studied considering technical, economic, environmental, regulatory, and safety factors. As a result of this study it is recommended that a 12 MW power plant be installed. Annual energy production would be 56 million kWh at an initial cost of 21.2 mills/kWh. (LCL)

  16. Economic Feasibility Study for Using Irradiation Technology in Preservation of Animalism Foods

    International Nuclear Information System (INIS)

    El Gameel, E.A.

    2011-01-01

    The present study discus the economic feasibility for the preservation animalism foods by using irradiation technology. This study has included the technical data, regression foretelling for the throughput, determination of irradiators types and radiation sources activity. This study comprises the financial analysis for the establishment animalism foods irradiation facilities (types: tote box, pallet conveyor) and the national return

  17. Feasibility study on the thorium fueled boiling water breeder reactor

    International Nuclear Information System (INIS)

    PetrusTakaki, N.

    2012-01-01

    The feasibility of (Th,U)O 2 fueled, boiling water breeder reactor based on conventional BWR technology has been studied. In order to determine the potential use of water cooled thorium reactor as a competitive breeder, this study evaluated criticality, breeding and void reactivity coefficient in response to changes made in MFR and fissile enrichments. The result of the study shows that while using light water as moderator, low moderator to fuel volume ratio (MFR=0.5), it was possible to breed fissile fuel in negative void reactivity condition. However the burnup value was lower than the value of the current LWR. On the other hand, heavy water cooled reactor shows relatively wider feasible breeding region, which lead into possibility of designing a core having better neutronic and economic performance than light water with negative void reactivity coefficient. (authors)

  18. Crosswell electromagnetic imaging for geothermal reservoir characterization - a feasibility study

    Science.gov (United States)

    Samrock, Friedemann; Saar, Martin O.

    2016-04-01

    Most regions in the world do not have ready access to natural convective hydrothermal resources. To use deep geothermal heat as a viable energy resource in low-permeability formations, permeable fracture networks have to be created artificially to enable deep fluid circulation for advective heat transport to a production well. Such generation of enhanced geothermal systems (EGS) is studied in the "Deep Underground Geothermal (DUG)" laboratory at the Grimsel pass, Switzerland. Here, an underground experiment is conducted by hydraulically stimulating a pre-existing shear zone within crystalline rock. The objectives of this project are to better describe and understand the processes acting during reservoir generation. We perform a feasibility study to evaluate the capability of low-frequency crosswell electromagnetic (EM) tomography for mapping of stimulation-induced changes in electrical conductivity. First numerical results show that crosswell EM data are generally sensitive to the inter-well conductivity distribution, which is affected by properties such as interconnected porosity, permeability and the presence of fluids. It thereby provides important information for characterization of potential EGS reservoirs. We present a 3-D forward modeling and inversion study using synthetic data and under realistic conditions, these include the true borehole spacing and the observed electromagnetic noise level in the DUG laboratory. Based on these results we discuss the system requirements and the capability of crosswell EM to recover the inter-well structure and stimulation-induced changes. Besides the numerical study we report on the current status of instrumentation and realization of crosswell EM measurements at the DUG laboratory.

  19. Fast-mixed spectrum reactor interim report initial feasibility study

    International Nuclear Information System (INIS)

    Fischer, G.J.; Cerbone, R.J.

    1979-01-01

    The report summarizes the results of an initial four-month feasibility study of the Fast-Mixed Spectrum Reactor (FMSR). Reactor physics, fuel cycle, and thermal-hydraulic analyses were performed on a reference design. These results when coupled to a fuel and materials evaluation performed in cooperation with the Argonne National Laboratory indicate that the FMSR is feasible provided the fuels, cladding, and subassembly ducts can survive a peak fuel burnup of 15 to 20 atom percent heavy metal and peak fluences of 8 x 10 23 (nvt > 0.1 MeV). The results of this short study have also provided a basis for exploring alternative designs requiring significantly lower peak burnup and fluences for their operation

  20. Pre-feasibility study of 80mw onshore wind farm

    International Nuclear Information System (INIS)

    Almas, M.S.

    2014-01-01

    This paper discusses a pre-feasibility study of 80MW onshore wind farm in the KPK (Khyber Pakhtunkhwa) province previously known as NWFP (North West Frontier) Province of Pakistan. The realistic data of wind speed is collected from Laboratory of Meteorology and Climatology (University of the Punjab) to study the feasibility of wind farm. Detailed analysis of wind turbines from four different manufacturers is carried out together with justifications of selecting a particular wind turbine. Issues related to site selection, wind farm civil foundation, recommendations for a particular choice of tower along with environmental effects are presented. Wind data analysis is carried out by using WINDROSE PRO software to determine the resultant direction of wind at the selected site for wind farm layout. The wind distribution at hub height of the wind turbine is calculated and is used to compute annual power production by the wind farm using power curves of the wind turbine. Electrical network integration issues of wind farm to the external grid are studied and the optimum point of connection is proposed. Finally, economic analysis of the whole wind farm project depending upon the LCC (Life Cycle Cost Analysis) is presented and the feasibility of the project from the investor's point of view is identified. The study concludes that the cost per kilowatt hour of electricity generated by this wind power plant will be 10.4 PKR/kWh and the payback period for the whole project is about 11.2 years. (author)

  1. Technical Feasibility Study for Zero Energy K-12 Schools

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Goldwasser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Torcellini, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pless, Shanti [National Renewable Energy Lab. (NREL), Golden, CO (United States); Studer, Daniel [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-11-01

    This technical feasibility study provides documentation and research results supporting a possible set of strategies to achieve source zero energy K-12 school buildings as defined by the U.S. Department of Energy (DOE) zero energy building (ZEB) definition (DOE 2015a). Under this definition, a ZEB is an energy-efficient building in which, on a source energy basis, the actual annual delivered energy is less than or equal to the on-site renewable exported energy.

  2. Feasibility Study of 8-Bit Microcontroller Applications for Ethernet

    OpenAIRE

    Lech Gulbinovič

    2011-01-01

    Feasibility study of 8-bit microcontroller applications for Ethernet is presented. Designed device is based on ATmega32 microcontroller and 10 Mbps Ethernet controller ENC28J60. Device is simulated as mass queuing theoretical model with ticket booking counter. Practical explorations are accomplished and characteristics are determined. Practical results are compared to theoretical ones. Program code and device packet processing speed optimization are discussed. Microcontroller packet processin...

  3. The Naval Postgraduate School flight mechanics laboratory : a feasibility study.

    OpenAIRE

    Reightler, Kenneth S., Jr.

    1984-01-01

    Distinguished Alumni Award Program author. CAPT Kenneth Reightler, Jr. USN (Ret) (Presented 6 Aug 09) The Naval Postgraduate School (NPS) currently has no laboratory facilities to support the teaching of flight mechanics. This thesis concerns a feasibility study con- ducted to define the need for a flight mechanics laboratory at NPS, determine the methods used at other universities and availability of resources, develop a plan to integrate laboratory facilities into the NPS aeronautical e...

  4. Coeur d'Alene Tribe Energy Efficiency Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Allgood, Tiffany L. [Coeur d' Alene Tribe, Plummer, ID (United States); Sorter, Andy [Coeur d' Alene Tribe, Plummer, ID (United States)

    2014-09-01

    The Coeur d'Alene Tribe's Energy Efficiency Feasibility Study (EEFS) is the culminating document that compiles the energy efficiency and building performance assessment and project prioritization process completed on 36 Tribally owned and operated facilities within Tribal lands. The EEFS contains sections on initial findings, utility billing analyses, energy conservation measures and prioritization and funding sources and strategies for energy project implementation.

  5. Feasibility Study for a Hopi Utility-Scale Wind Project

    Energy Technology Data Exchange (ETDEWEB)

    Kendrick Lomayestewa

    2011-05-31

    The goal of this project was to investigate the feasibility for the generation of energy from wind and to parallel this work with the development of a tribal utility organization capable of undertaking potential joint ventures in utility businesses and projects on the Hopi reservation. The goal of this project was to investigate the feasibility for the generation of energy from wind and to parallel this work with the development of a tribal utility organization capable of undertaking potential joint ventures in utility businesses and projects on the Hopi reservation. Wind resource assessments were conducted at two study sites on Hopi fee simple lands located south of the city of Winslow. Reports from the study were recently completed and have not been compared to any existing historical wind data nor have they been processed under any wind assessment models to determine the output performance and the project economics of turbines at the wind study sites. Ongoing analysis of the wind data and project modeling will determine the feasibility of a tribal utility-scale wind energy generation.

  6. Will patients accept randomization to psychoanalysis? A feasibility study.

    Science.gov (United States)

    Caligor, Eve; Hilsenroth, Mark J; Devlin, Michael; Rutherford, Bret R; Terry, Madeleine; Roose, Steven P

    2012-04-01

    The feasibility of using a randomized design in a psychoanalytic outcome study was evaluated. Our hypothesis was that it would be feasible to randomize patients to psychoanalysis three or four times weekly on the couch for five years, supportive expressive therapy once or twice weekly for up to forty sessions, and cognitive behavior therapy once or twice weekly for up to forty sessions. Successful randomization was defined as a 30% recruitment rate among eligible patients. Recruitment began in September 2009 and closed in April 2010. A total of 132 subjects responded to study advertisements, 107 of whom (81%) were triaged out. The remaining 25 were scheduled for the first of two clinical interviews, and 21 of 25 (88%) completed the interview. Eleven of the 25 (44%) were determined to be eligible based on inclusion and exclusion criteria. Eight of the 11 accepted the idea of randomization and completed the diagnostic assessment phase. Calculated on the basis of 8 of 11 eligible patients accepting randomization, the 95% confidence interval was that 39% to 92% of eligible subjects would participate in a larger study of this design. Our findings support the feasibility of implementing an RCT comparing psychoanalysis as defined by the American Psychoanalytic Association (three or four times weekly on the couch for approximately five years) with shorter-term dynamic or cognitive behavioral therapy once or twice a week. Pre-treatment characteristics of these eight patients are presented, as are initial reliability data for the treatment adherence scales used in this trial.

  7. A Postpartum Sleep and Fatigue Intervention Feasibility Pilot Study.

    Science.gov (United States)

    Doering, Jennifer J; Dogan, Sirin

    2018-01-01

    The purpose of this pilot study was to evaluate the feasibility, acceptability, and cost of a self-management intervention for postpartum fatigue and sleep in socioeconomically disadvantaged urban women. Helping U Get Sleep (HUGS) is a theory-guided intervention developed from the Individual and Family Self-Management Theory. Medicaid-enrolled participants in the United States were recruited from an inpatient postpartum unit. Treatment and attention control interventions were delivered (15 HUGS, 12 comparison) at a week 3 postpartum home visit and 4 follow-up phone calls. Over the 9-week protocol, the HUGS group demonstrated significant improvements in subjective fatigue and subjective sleep disturbance relative to the comparison group. The HUGS intervention was feasible and acceptable, delivered on average, in 100 min and costing US$79 per participant.

  8. A feasibility study on a tomograph for radioactive waste examination

    International Nuclear Information System (INIS)

    Montigon, J.F.

    1987-01-01

    A feasibility study on a high-energy tomograph for radioactive waste examination has been carried out by CEA/SEDFMA (Cadarache, France). After describing the scope of the research (radiation source, detector system, data processing, station mechanics), this final report deals with the work programme which has been followed and gives the results of the research. The conclusion is that such a tomograph is feasible, and its preliminary design is shown. The main points are that: - the detector material will be BGO, - the transmission of gamma rays through concrete (up to 1 625 mm thick) has been measured and a calculation code has been validated, - the radiation source will be an accelerator which has to be carefully optimized, - the system configuration has been determined and the data processors have been chosen, - the algorithms for image reconstruction have been validated through taking a tomogram on a concrete sample

  9. Code of Conduct for wind-power projects - Feasibility study

    International Nuclear Information System (INIS)

    Strub, P.; Ziegler, Ch.

    2009-02-01

    This final report deals with the results of a feasibility study concerning the development of a Code of Conduct for wind-power projects. The aim is to strengthen the acceptance of wind-power by the general public. The necessity of new, voluntary market instruments is discussed. The urgency of development in this area is quoted as being high, and the authors consider the feasibility of the definition of a code of conduct as being proven. The code of conduct can, according to the authors, be of use at various levels but primarily in project development. Further free-enterprise instruments are also suggested that should help support socially compatible and successful market development. It is noted that the predominant portion of those questioned are prepared to co-operate in further work on the subject

  10. [Feasibility study for whole plant medicinal use of Tribulus terrestris].

    Science.gov (United States)

    Yang, Li; Wang, Chunyu; Han, Meiw; Yang, Limin

    2009-09-01

    The content differences of leaf, plant and fruit of Tribulus terrestris was compared to study the feasibility of whole plant medicinal use. The samples were collected in three typical habitats and six different production areas of T. terrestris. The main medicinal ingredients saponins and flavonoids were determined in root, stem, leaf and fruit during the harvest time. The two ingredients were abounded in leaf and more than 2.61 times as in other parts of the plant. The results showed that there were no differences between the whole plant and the fruit. It should pay more attentions on the collection, preservation and utilization of the leaf of T. terrestris in the harvesting and processing stage. The whole plant for medical use was feasibility based on the content of the ingredients.

  11. Feasibility Study on Manufacturing Lightweight Aggregates from Water Purification Sludge

    Science.gov (United States)

    Peng, Ching-Fang; Chen, How-Ji

    2018-02-01

    This study mainly discussed the feasibility of manufacturing lightweight aggregates from water purification sludge in Taiwan. They were analysed for the physical and chemical composition before the sintering test for lightweight aggregates in a laboratory. Then the physical and mechanical properties of the synthesized aggregates were assessed. The result showed that the chemical composition of sludge in the water purification plants was within the appropriate range for manufacturing lightweight aggregate as proposed in the literature. The sintering test demonstrated that the particle density of aggregates from the ten types of water purification sludge were mostly less than 1.8 g/cm3. In addition, the dry unit weight, the organic impurity, the ignition loss, and other characteristics of synthesized aggregates met the requirement of CNS standards, while its water absorption and crushing strength also fulfilled the general commercial specifications. Therefore, reclamation of water purification sludge for production of lightweight aggregate is indeed feasible.

  12. Feasibility of the Dutch ICF Activity Inventory: a pilot study

    Directory of Open Access Journals (Sweden)

    van Nispen Ruth MA

    2010-11-01

    Full Text Available Abstract Background Demographic ageing will lead to increasing pressure on visual rehabilitation services, which need to be efficiently organised in the near future. The Dutch ICF Activity Inventory (D-AI was developed to assess the rehabilitation needs of visually impaired persons. This pilot study tests the feasibility of the D-AI using a computer-assisted telephone interview. Methods In addition to the regular intake, the first version of the D-AI was assessed in 20 patients. Subsequently, patients and intake assessors were asked to fill in an evaluation form. Based on these evaluations, a new version of the D-AI was developed. Results Mean administration time of the D-AI was 88.8 (± 41.0 minutes. Overall, patients and assessors were positive about the D-AI assessment. However, professionals and 60% of the patients found the administration time to be too long. All included items were considered relevant and only minor adjustments were recommended. Conclusion The systematic character of the revised D-AI will prevent topics from being overlooked and indicate which needs have the highest priority from a patient-centred perspective. Moreover, ongoing assessment of the D-AI will enhance evaluation of the rehabilitation process. To decrease administration time, in the revised D-AI only the top priority goals will be fully assessed. Using the D-AI, a rehabilitation plan based on individual needs can be developed for each patient. Moreover, it enables better evaluation of the effects of rehabilitation. A larger validation study is planned.

  13. Comprehensive Renewable Energy Feasibility Study for Sealaska Corporation

    Energy Technology Data Exchange (ETDEWEB)

    Robert Lynette; John Wade: Larry Coupe

    2006-06-30

    The purposes of this project were: (1) to conduct a comprehensive feasibility study to determine the potential sustainability of wind and/or small hydroelectric power plants on Southeast Alaska native village lands, and (2) to provide the villages with an understanding of the requirements, costs, and benefits of developing and operating wind or small hydroelectric power plants. The program was sponsored by the Tribal Energy program, Office of Energy Efficiency and Renewable Energy, US Department of Energy. The Contractor was Sealaska Corporation, the Regional Native Corporation for Southeast Alaska that includes 12 village/urban corporations. Most villages are isolated from any central electric transmission and use diesel-electric systems for power generation, making them prime candidates for deploying renewable energy sources. Wind Energy - A database was assembled for all of the candidate sites in SE Alaska, including location, demographics, electricity supply and demand, existing and planned transmission interties with central generation, topographical maps, macro wind data, and contact personnel. Field trips were conducted at the five candidate villages that were deemed most likely to have viable wind resources. Meetings were held with local village and utility leaders and the requirements, costs, and benefits of having local renewable energy facilities were discussed. Two sites were selected for anemometry based on their needs and the probability of having viable wind resources – Yakutat and Hoonah. Anemometry was installed at both sites and at least one year of wind resource data was collected from the sites. This data was compared to long-term data from the closest weather stations. Reports were prepared by meteorologist John Wade that contains the details of the measured wind resources and energy production projections. Preliminary financial analysis of hypothetical wind power stations were prepared to gauge the economic viability of installing such

  14. Preliminary feasibility study of the heat - pipe ENHS reactor

    International Nuclear Information System (INIS)

    Fratoni, M.; Kim, L.; Mattafirri, S.; Petroski, R.; Greenspan, E.

    2007-01-01

    This preliminary study assesses the feasibility of designing an Encapsulated Nuclear Heat Source (ENHS) reactor [1] to have a solid core from which heat is removed by liquid-metal heat pipes (HP). Like the SAFE space nuclear reactor core [2], the HP-ENHS core is comprised of fuel rods and HPs embedded in a solid structure arranged in a hexagonal lattice in a 3:1 ratio. The HPs extend beyond the core length and transfer heat to a secondary coolant that flows by natural circulation. The HP-ENHS reactor is designed to preserve many features of the ENHS reactor including 20-year operation without refueling, very small excess reactivity throughout life, natural circulation cooling, walk-away passive safety, and robust proliferation resistance. The target power level and specific power of the HP-ENHS reactor are those of the reference ENHS reactor [1]. Compared to previous ENHS reactor designs utilizing a lead or lead-bismuth alloy natural circulation cooling system, the HP-ENHS reactor offers a number of possible advantageous features including: (1) significantly enhanced decay heat removal capability; (2) no positive void reactivity coefficients; (3) no direct contact between the fuel clad and coolant, hence, relatively lower wet corrosion of the clad; (4) a core that is more robust for transportation; (5) higher temperature potentially offering higher efficiency and hydrogen production capability. The study focuses on four areas: material compatibility analysis, HP performance analysis, neutronic analysis and thermal-hydraulic analysis. Of four high-temperature structural materials evaluated, Mo TZM alloy is the preferred choice; its upper estimated feasible operating temperature is 1350 K. HP performance is evaluated as a function of working fluid type, operating temperature, wick design and HP diameter and length. Sodium is the preferred working fluid and the HP working temperature is 1300 K. The neutronic analysis found that it is possible to achieve criticality

  15. Pascua Yaqui Tribe Renewable Energy Development and Deployment Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Arvayo, Maria

    2014-05-30

    In 2012, PYT was awarded a grant from the Department of Energy Tribal Energy Program to conduct a Renewable Energy Development and Deployment Feasibility Study that would define the technical and economic viability of renewable energy on tribal lands. Red Mountain Energy Partners (RMEP) was hired by PYT to complete the study. Through this study, Red Mountain concluded that there are viable opportunities for solar at Tortuga Ranch, the Casino del Sol and a third site near the Justice Center on Camino de Oeste.

  16. Feasibility Study for Renewable Energy Development on Tribal Lands

    Energy Technology Data Exchange (ETDEWEB)

    John Hendrix, Project Director; Charles Weir, Project Manager; Dr. John Plodinec, Technology Advisor; Dr. Steve Murray, Economic Advisor

    2005-07-21

    the Mississippi Band of Choctaw Indians (MBCI) conducted the feasibility study. The team included the Mississippi Alternative Energy Enterprise (MAEE), the Mississippi State University Food and Fiber Center, Mississippi State University Diagnostic Instrumentation and Analysis Laboratory (DIAL), and the Mississippi State University Department of Electrical and Computer Engineering. This report and its findings are based on the best available data existing during the covering period and the analysis reflects good faith estimates and assumptions of factors for a biomass-based renewable energy project for the Mississippi Band of Choctaw Indians and any conclusions or finding herein should not be extrapolated to other areas of the country.

  17. Feasibility study for mega-electron-volt electron beam tomography.

    Science.gov (United States)

    Hampel, U; Bärtling, Y; Hoppe, D; Kuksanov, N; Fadeev, S; Salimov, R

    2012-09-01

    Electron beam tomography is a promising imaging modality for the study of fast technical processes. But for many technical objects of interest x rays of several hundreds of keV energy are required to achieve sufficient material penetration. In this article we report on a feasibility study for fast electron beam computed tomography with a 1 MeV electron beam. The experimental setup comprises an electrostatic accelerator with beam optics, transmission target, and a single x-ray detector. We employed an inverse fan-beam tomography approach with radiographic projections being generated from the linearly moving x-ray source. Angular projections were obtained by rotating the object.

  18. Feasibility study on the development of proton accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Ki Hyung; Bang, Hyung Chan; Cho, Yong Sup [Seoul National University, Seoul (Korea, Republic of); Kim, Young Rak [Church Environment Research Institute, Seoul (Korea, Republic of); Nam Kung, Won; Cho, Moo Hyun [Pohang University of Science and Technology, Pohang (Korea, Republic of); Seo, Tae Suk [Cartolrik University, Seoul (Korea, Republic of); Woo, Hyung Joo [Nature Research Institute, Seoul (Korea, Republic of); Lee, Kyung Soo [Basic Study Research Institute, Seoul (Korea, Republic of); Lee, Hun Joo [Cheju National University, Cheju (Korea, Republic of); Chang, Soon Hong; Cho, Nam Jin [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of); Han, Jeon Kun [Sungkyunkwan University, Seoul (Korea, Republic of)

    1996-10-01

    A feasibility on the development of a high energy proton accelerator to be used for R and D in the nuclear field of korea was studied. The proposed one is a proton linac with parameters of about 1 GeV, 20 mA which can supply enough neutrons by the spallation reaction to drive a subcritical reactor. It= is expected to solve the intrinsic problem in the nuclear field such as safety, nuclear waste, proliferation and resource. The study was carried out through a multi-institutional cooperation of universities, institute and industry for a national consensus. 5 refs., 8 tabs., 8 figs. (author)

  19. A Feasibility Study of Using ICT in Iranian Secondary Schools: The Case of Tehran Province

    Science.gov (United States)

    Fathi Vajargah, Kourosh; Saadattlab, Ayat

    2014-01-01

    This research presents the results of a feasibility assessment on implementing ICT in Tehran high schools. Mixed method research (both qualitative and quantitative) was employed and due to the nature of research, data collection included two stages: library and field study. Using the cluster method with 362 subjects, data was collected using a…

  20. Feasibility study of gasification of oil palm fronds

    Directory of Open Access Journals (Sweden)

    S.A. Sulaiman

    2015-12-01

    Full Text Available Considering the large and consistent supply, oil palm fronds could be a promising source of biomass energy through gasification. There is very scarce information on the characteristics of oil palm fronds, which is vital in deciding if such biomass is technically suitable for gasification. In the present work, the feasibility of oil palm fronds for biomass gasification is studied. The study is conducted experimentally via standard tests to determine their thermochemical characteristics. Ultimate analysis is conducted to determine the contents of carbon, nitrogen, hydrogen and sulphide in oil palm fronds. Proximate analysis is performed to identify the burning characteristics of the biomass. The energy content in the fronds is determined by using a bomb calorie meter and is around 18 MJ/kg. The ignitability of the fronds is also studied experimentally to assess the ease to start-up combustion of the fronds. The characteristics of the flame of the resulting syngas from gasification of oil palm fronds are qualitatively studied. Simulated syngas composition study reveals potentials of 22% CO, 1.3% H2, 18.5% CO2 and traces of CH4. The study is extended to computer simulation to predict composition of the syngas. It is found from this work that oil palm fronds are feasible for gasification and has a good potential as a renewable energy source.

  1. A comprehensive assessment protocol including patient reported outcomes, physical tests, and biological sampling in newly diagnosed patients with head and neck cancer: is it feasible?

    NARCIS (Netherlands)

    van Nieuwenhuizen, A.J.; Buffart, L.M.; Smit, J.H.; Brakenhoff, R.H.; Braakhuis, B.J.; de Bree, R.; Leemans, C.; Verdonck-de Leeuw, I.M.

    2014-01-01

    Purpose Large cohort studies are needed taking into account cancer-related, personal, biological, psychobehavioral, and lifestyle-related factors, to guide future research to improve treatment and supportive care. We aimed to evaluate the feasibility of a comprehensive baseline assessment of a

  2. Woodbridge Research Facility Remedial Investigation/Feasibility Study; Focused Feasibility Study for Operable Unit Three

    Science.gov (United States)

    1997-11-01

    204) 36 GVF Test Structure 19 Thermal Battery Storage 37 Creosote Pole Disposal Sites 20 Former Incinerator 38 NVCC Study Area 21 Former Storage... bioremediating the 6400 cubic meters of soil containing elevated levels of crude chlorophenol. The white rot fungus has also been used to remediate sites in...increased moisture content of the sediment may cause a problem when bioremediating the sediment through the introduction of a pre-grown white rot fungus

  3. Geothermal application feasibility study for the New Mexico Institute of Mining and Technology Campus

    Energy Technology Data Exchange (ETDEWEB)

    Miller, A.R.

    1978-04-01

    This study was limited to determining the economic feasibility of providing the space heating, water heating, space cooling, and electrical power needs of New Mexico Tech from geothermal energy. The means of obtaining the required heat and water from the earth, and the possibility of corrosive effects were not part of this study. The results indicate that space heating and water heating are economically feasible if the cost of developing a geothermal source is not included. The major expense then is the pipeline used to convey the energy to the campus. calculations show that this cost is approximately two to three times our current annual heating bill, The study also showed that it would not be economically feasible to provide our relatively small space cooling and electrical energy needs from geothermal energy.

  4. Design Feasibility Study for a Demultiplexer Miniaturized for Microtomographic Imaging

    Science.gov (United States)

    Lang, Udo; Trtik, Pavel; Notter, Manuela; Hovind, Jan; Lehmann, Eberhard H.

    In this paper a design feasibility study of a miniaturized demultiplexer that allows for simultaneous tomographic imaging on three independent rotational axes. While the general concept has been proven on a larger scale for three centimeter sized samples, the downscaling of this concept is presented herein. The main requirements are firstly, positioning of the samples parallel to the detector screen for stable imaging and secondly, the use of backlash free gears to avoid any angular play. Based on these requirements a concept is shown that consists of three precisely positioned anti-backlash axes within a housing with a spacing of 3.5 mm.

  5. Feasibility Study for Operable Unit 7-13/14

    Energy Technology Data Exchange (ETDEWEB)

    K. Jean Holdren

    2007-05-29

    The Subsurface Disposal Area is a radioactive waste landfill located within the Radioactive Waste Management Complex at the Idaho National Laboratory Site in southeastern Idaho. This Feasibility Study for Operable Unit 7-13/14 analyzes options for mitigating risks to human health and the environment associated with the landfill. Analysis is conducted in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act, using nine evaluation criteria to develop detailed and comparative analysis of five assembled alternatives. Assembled alternatives are composed of discrete modules. Ultimately, decision-makers will select, recombine, and sum various modules into an optimized preferred alternative and final remedial decision.

  6. Feasibility Study for Operable Unit 7-13/14

    International Nuclear Information System (INIS)

    K. Jean Holdren Thomas E. Bechtold Brian D. Preussner

    2007-01-01

    The Subsurface Disposal Area is a radioactive waste landfill located within the Radioactive Waste Management Complex at the Idaho National Laboratory Site in southeastern Idaho. This Feasibility Study for Operable Unit 7-13/14 analyzes options for mitigating risks to human health and the environment associated with the landfill. Analysis is conducted in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act, using nine evaluation criteria to develop detailed and comparative analysis of five assembled alternatives. Assembled alternatives are composed of discrete modules. Ultimately, decision-makers will select, recombine, and sum various modules into an optimized preferred alternative and final remedial decision

  7. Feasibility study. Solar energy in Norway; Mulighetsstudie. Solenergi i Norge

    Energy Technology Data Exchange (ETDEWEB)

    Halvorsen, Una; Bernhard, Peter; Salvesen, Fritjof; Bugge, Lars; Andresen, Inger; Simonsen, Ingeborg

    2011-07-01

    On behalf of Enova KanEnergi and SINTEF summarized the results of the project 'Feasibility study. Solar energy' in a report. The purpose of this report is to outline an overview of the potential for solar energy in Norway to be realized until 2020. This is a survey of the status of technology and associated costs related to energy production, as well as a description of the market conditions. This report is a contribution to Enova's ongoing strategy and development. (eb)

  8. Technical feasibility study of 60 MWe fast reactor concept: RAPID

    International Nuclear Information System (INIS)

    Kambe, Mitsuru; Ueda, Nobuyuki; Uotani, Masaki

    1993-01-01

    A study has been performed on the passive safety features and technical feasibility of an inherently safe 60 MWe fast reactor concept RAPID to meet various power requirements in Japan. The system dynamic analyses on the UTOP and ULOF transients revealed that the enhanced reactivity feedback derived from an annular core configuration and the integrated fuel assembly provides a high margin of self-protection. Structural integrity of the integrated fuel assembly has also been confirmed. The following innovative key technologies have been demonstrated; Lithium Injection Modules (LIM) for ultimate shutdown, Lithium Expansion Modulus (LEM) for inherent reactivity feedback and Void Leading Channel (VLC) for the sodium void worth reduction. (author)

  9. Feasibility study for the United Heckathorn Superfund Site, Richmond, California

    International Nuclear Information System (INIS)

    Lincoff, A.H.

    1994-07-01

    The United Heckathom Superfund Site in Richmond, California, was used to formulate pesticides from approximately 1947 to 1966. Soils at the site and sediments in the harbor were contaminated with various chlorinated pesticides, primarily DDT, as a result of these activities. The US Environmental Protection Agency listed the site on the Superfund National Priorities List in 1990. This document is part of the Remedial Investigation and Feasibility Study phase of the Superfund response, which will provide the basis for selection of a final remedy that will protect human health and the environment and achieve compliance with federal and state envirorunental laws

  10. Feasibility study for the United Heckathorn Superfund Site, Richmond, California

    Energy Technology Data Exchange (ETDEWEB)

    Lincoff, A.H. [US Environmental Protection Agency, San Francisco, CA (United States). Region IX; Costan, G.P.; Montgomery, M.S.; White, P.J. [Pacific Northwest Lab., Richland, WA (United States)

    1994-07-01

    The United Heckathom Superfund Site in Richmond, California, was used to formulate pesticides from approximately 1947 to 1966. Soils at the site and sediments in the harbor were contaminated with various chlorinated pesticides, primarily DDT, as a result of these activities. The US Environmental Protection Agency listed the site on the Superfund National Priorities List in 1990. This document is part of the Remedial Investigation and Feasibility Study phase of the Superfund response, which will provide the basis for selection of a final remedy that will protect human health and the environment and achieve compliance with federal and state envirorunental laws.

  11. Livingston Parish Landfill Methane Recovery Project (Feasibility Study)

    Energy Technology Data Exchange (ETDEWEB)

    White, Steven

    2012-11-15

    The Woodside Landfill is owned by Livingston Parish, Louisiana and is operated under contract by Waste Management of Louisiana LLC. This public owner/private operator partnership is commonplace in the solid waste industry today. The landfill has been in operation since approximately 1988 and has a permitted capacity of approximately 41 million cubic yards. Based on an assumed in-place waste density of 0.94 ton per cubic yard, the landfill could have an expected design capacity of 39.3 million tons. The landfill does have an active landfill gas collection and control system (LFGCCS) in place because it meets the minimum thresholds for the New Source Performance Standards (NSPS). The initial LFGCS was installed prior to 2006 and subsequent phases were installed in 2007 and 2010. The Parish received a grant from the United States Department of Energy in 2009 to evaluate the potential for landfill gas recovery and utilization at the Woodside Landfill. This includes a technical and economic feasibility study of a project to install a landfill gas to energy (LFGTE) plant and to compare alternative technologies. The LFGTE plant can take the form of on-site electrical generation, a direct use/medium Btu option, or a high-Btu upgrade technology. The technical evaluation in Section 2 of this report concludes that landfill gas from the Woodside landfill is suitable for recovery and utilization. The financial evaluations in sections 3, 4, and 5 of this report provide financial estimates of the returns for various utilization technologies. The report concludes that the most economically viable project is the Electricity Generation option, subject to the Parish’s ability and willingness to allocate adequate cash for initial capital and/or to obtain debt financing. However, even this option does not present a solid return: by our estimates, there is a 19 year simple payback on the electricity generation option. All of the energy recovery options discussed in this report

  12. Remote autopsy services: A feasibility study on nine cases.

    Science.gov (United States)

    Vodovnik, Aleksandar; Aghdam, Mohammad Reza F; Espedal, Dan Gøran

    2017-01-01

    Introduction We have conducted a feasibility study on remote autopsy services in order to increase the flexibility of the service with benefits for teaching and interdepartmental collaboration. Methods Three senior staff pathologists, one senior autopsy technician and one junior resident participated in the study. Nine autopsies were performed by the autopsy technician or resident, supervised by the primary pathologist, through the secure, double encrypted video link using Jabber Video (Cisco) with a high-speed broadband connection. The primary pathologist and autopsy room each connected to the secure virtual meeting room using 14″ laptops with in-built cameras (Hewlett-Packard). A portable high-definition web camera (Cisco) was used in the autopsy room. Primary and secondary pathologists independently interpreted and later compared gross findings for the purpose of quality assurance. The video was streamed live only during consultations and interpretation. A satisfaction survey on technical and professional aspects of the study was conducted. Results Independent interpretations of gross findings between primary and secondary pathologists yielded full agreement. A definite cause of death in one complex autopsy was determined following discussions between pathologists and reviews of the clinical notes. Our satisfaction level with the technical and professional aspects of the study was 87% and 97%, respectively. Discussion Remote autopsy services are found to be feasible in the hands of experienced staff, with increased flexibility and interest of autopsy technicians in the service as a result.

  13. Feasibility Study for Cobalt Bundle Loading to CANDU Reactor Core

    International Nuclear Information System (INIS)

    Park, Donghwan; Kim, Youngae; Kim, Sungmin

    2016-01-01

    CANDU units are generally used to produce cobalt-60 at Bruce and Point Lepreau in Canada and Embalse in Argentina. China has started production of cobalt-60 using its CANDU 6 Qinshan Phase III nuclear power plant in 2009. For cobalt-60 production, the reactor’s full complement of stainless steel adjusters is replaced with neutronically equivalent cobalt-59 adjusters, which are essentially invisible to reactor operation. With its very high neutron flux and optimized fuel burn-up, the CANDU has a very high cobalt-60 production rate in a relatively short time. This makes CANDU an excellent vehicle for bulk cobalt-60 production. Several studies have been performed to produce cobalt-60 using adjuster rod at Wolsong nuclear power plant. This study proposed new concept for producing cobalt-60 and performed the feasibility study. Bundle typed cobalt loading concept is proposed and evaluated the feasibility to fuel management without physics and system design change. The requirement to load cobalt bundle to the core was considered and several channels are nominated. The production of cobalt-60 source is very depend on the flux level and burnup directly. But the neutron absorption characteristic of cobalt bundle is too high, so optimizing design study is needed in the future

  14. Telephone Care Management of Fall Risk:: A Feasibility Study.

    Science.gov (United States)

    Phelan, Elizabeth A; Pence, Maureen; Williams, Barbara; MacCornack, Frederick A

    2017-03-01

    Care management has been found to be more effective than usual care for some chronic conditions, but few studies have tested care management for prevention of elder falls. This study aimed to assess the feasibility and preliminary efficacy of telephone care management of older adults presenting for medical attention due to a fall. The setting was an independent practice association in western Washington serving 1,300 Medicare Advantage-insured patients. Patients aged ≥65 years treated for a fall in an emergency department or their primary care provider's office were contacted via telephone by a care manager within 48 hours of their fall-related visit and invited to participate in a telephone-administered interview to identify modifiable fall risk factors and receive recommendations and follow-up to address identified risk factors. Data from care manager records, patient medical records, and healthcare claims for the first 6 months (November 2009-April 2010) of program implementation were analyzed in 2011. The feasibility of screening and management of fall risk factors over the telephone and the effect on medically attended falls were assessed. Twenty-two patients eligible for fall care management were reached and administered the protocol. Administration took 15-20 minutes and integrated easily with the care manager's other responsibilities. Follow-through on recommendations varied, from 45% for those for whom exercise participation was recommended to 100% for other recommendations. No medically attended falls occurred over 6 months of follow-up. Telephone care management of fall risk appears feasible and may reduce falls requiring medical attention. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  15. Can Digital Technology Enhance Social Connectedness Among Older Adults? A Feasibility Study.

    Science.gov (United States)

    Barbosa Neves, Barbara; Franz, Rachel; Judges, Rebecca; Beermann, Christian; Baecker, Ron

    2017-11-01

    This study examined the feasibility of a novel communication technology to enhance social connectedness among older adults in residential care. Research suggests that technology can create opportunities for social connectedness, helping alleviate social isolation and loneliness. Studies on implementation and feasibility of such technological interventions, particularly among frail and institutionalized older adults, are scant. Data were gathered in a 3-month deployment with 12 older adults, including semistructured interviews with participants and relatives/friends, psychometric scales, field observations, and usability tests. Data were analyzed with qualitative profiling, thematic analysis, and Friedman tests. The technology was a feasible communication tool, although requiring an adaptation period. Use increased perceived social interaction with ties, but increased social connectedness (meaningful social interaction) was only reported by participants with geographically distant relatives. Sense of well-being and confidence with technology was enhanced, but negative effects were also observed. Findings are useful for researchers and practitioners interested in technological interventions.

  16. Assessment of apical periodontitis by MRI. A feasibility study

    International Nuclear Information System (INIS)

    Geibel, M.A.; Schreiber, E.S.; Bracher, A.K.; Rasche, V.; Hell, E.; Ulrici, J.; Sailer, L.K.; Ozpeynirci, Y.

    2015-01-01

    The purpose of this clinical feasibility study was to evaluate the applicability of magnetic resonance imaging (MRI) for the assessment of apical periodontitis in direct comparison with cone beam CT (CBCT). 19 consecutive patients (average age 43 ± 13 years) with 34 lesions in total (13 molars, 14 premolars and 7 front teeth) were enrolled in this feasibility study. Periapical lesions were defined as periapical radiolucencies (CBCT) or structural changes in the spongy bone signal (MRI), which were connected with the apical part of a root and with at least twice the width of the periodontal ligament space. The location and dimension of the lesions were compared between MRI and CBCT. While mainly mineralized tissue components such as teeth and bone were visible with CBCT, complimentary information of the soft tissue components was assessable with MRI. The MRI images provided sufficient diagnostic detail for the assessment of the main structures of interest. Heterogeneous contrast was observed within the lesion, with often a clear enhancement close to the apical foramen and the periodontal gap. No difference for lesion visibility was observed between MRI and CBCT. The lesion dimensions corresponded well, but were slightly but significantly overestimated with MRI. A heterogeneous lesion appearance was observed in several patients. Four patients presented with a well circumscribed hyperintense signal in the vicinity of the apical foramen. The MRI capability of soft tissue characterization may facilitate detailed analysis of periapical lesions. This clinical study confirms the applicability of multi-contrast MRI for the identification of periapical lesions.

  17. Economic and technical feasibility study of compressed air storage

    Energy Technology Data Exchange (ETDEWEB)

    1976-03-01

    The results of a study of the economic and technical feasibility of compressed air energy storage (CAES) are presented. The study, which concentrated primarily on the application of underground air storage with combustion turbines, consisted of two phases. In the first phase a general assessment of the technical alternatives, economic characteristics and the institutional constraints associated with underground storage of compressed air for utility peaking application was carried out. The goal of this assessment was to identify potential barrier problems and to define the incentive for the implementation of compressed air storage. In the second phase, the general conclusions of the assessment were tested by carrying out the conceptual design of a CAES plant at two specific sites, and a program of further work indicated by the assessment study was formulated. The conceptual design of a CAES plant employing storage in an aquifer and that of a plant employing storage in a conventionally excavated cavern employing a water leg to maintain constant pressure are shown. Recommendations for further work, as well as directions of future turbo-machinery development, are made. It is concluded that compressed air storage is technically feasible for off-peak energy storage, and, depending on site conditions, CAES plants may be favored over simple cycle turbine plants to meet peak demands. (LCL)

  18. Assessment of apical periodontitis by MRI. A feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Geibel, M.A. [Ulm Univ. (Germany). Oral and Maxillofacial Surgery; Schreiber, E.S.; Bracher, A.K.; Rasche, V. [Ulm Univ. (Germany). Internal Medicine II; Hell, E.; Ulrici, J. [Sirona Dental Systems GmbH, Bensheim (Germany). Dental Imaging; Sailer, L.K. [DOC Praxisklinik im Wiley, Neu-Ulm (Germany). MKG; Ozpeynirci, Y. [Ulm Univ. (Germany). Diagnostic and Interventional Radiology

    2015-04-15

    The purpose of this clinical feasibility study was to evaluate the applicability of magnetic resonance imaging (MRI) for the assessment of apical periodontitis in direct comparison with cone beam CT (CBCT). 19 consecutive patients (average age 43 ± 13 years) with 34 lesions in total (13 molars, 14 premolars and 7 front teeth) were enrolled in this feasibility study. Periapical lesions were defined as periapical radiolucencies (CBCT) or structural changes in the spongy bone signal (MRI), which were connected with the apical part of a root and with at least twice the width of the periodontal ligament space. The location and dimension of the lesions were compared between MRI and CBCT. While mainly mineralized tissue components such as teeth and bone were visible with CBCT, complimentary information of the soft tissue components was assessable with MRI. The MRI images provided sufficient diagnostic detail for the assessment of the main structures of interest. Heterogeneous contrast was observed within the lesion, with often a clear enhancement close to the apical foramen and the periodontal gap. No difference for lesion visibility was observed between MRI and CBCT. The lesion dimensions corresponded well, but were slightly but significantly overestimated with MRI. A heterogeneous lesion appearance was observed in several patients. Four patients presented with a well circumscribed hyperintense signal in the vicinity of the apical foramen. The MRI capability of soft tissue characterization may facilitate detailed analysis of periapical lesions. This clinical study confirms the applicability of multi-contrast MRI for the identification of periapical lesions.

  19. Fusion Guidance in Endovascular Peripheral Artery Interventions: A Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Sailer, Anna M., E-mail: anni.sailer@mumc.nl; Haan, Michiel W. de, E-mail: m.de.haan@mumc.nl; Graaf, Rick de, E-mail: r.de.graaf@mumc.nl; Zwam, Willem H. van, E-mail: w.van.zwam@mumc.nl [Maastricht University Medical Center, Department of Radiology (Netherlands); Schurink, Geert Willem H., E-mail: gwh.schurink@mumc.nl [Maastricht University Medical Center, Department of Surgery (Netherlands); Nelemans, Patricia J., E-mail: patty.nelemans@maastrichtuniversity.nl [Maastricht University Medical Centre, Department of Epidemiology (Netherlands); Wildberger, Joachim E., E-mail: j.wildberger@mumc.nl; Das, Marco, E-mail: m.das@mumc.nl [Maastricht University Medical Center, Department of Radiology (Netherlands)

    2015-04-15

    PurposeThis study was designed to evaluate the feasibility of endovascular guidance by means of live fluoroscopy fusion with magnetic resonance angiography (MRA) and computed tomography angiography (CTA).MethodsFusion guidance was evaluated in 20 endovascular peripheral artery interventions in 17 patients. Fifteen patients had received preinterventional diagnostic MRA and two patients had undergone CTA. Time for fluoroscopy with MRA/CTA coregistration was recorded. Feasibility of fusion guidance was evaluated according to the following criteria: for every procedure the executing interventional radiologists recorded whether 3D road-mapping provided added value (yes vs. no) and whether PTA and/or stenting could be performed relying on the fusion road-map without need for diagnostic contrast-enhanced angiogram series (CEAS) (yes vs. no). Precision of the fusion road-map was evaluated by recording maximum differences between the position of the vasculature on the virtual CTA/MRA images and conventional angiography.ResultsAverage time needed for image coregistration was 5 ± 2 min. Three-dimensional road-map added value was experienced in 15 procedures in 12 patients. In half of the patients (8/17), intervention was performed relying on the fusion road-map only, without diagnostic CEAS. In two patients, MRA roadmap showed a false-positive lesion. Excluding three patients with inordinate movements, mean difference in position of vasculature on angiography and MRA/CTA road-map was 1.86 ± 0.95 mm, implying that approximately 95 % of differences were between 0 and 3.72 mm (2 ± 1.96 standard deviation).ConclusionsFluoroscopy with MRA/CTA fusion guidance for peripheral artery interventions is feasible. By reducing the number of CEAS, this technology may contribute to enhance procedural safety.

  20. Fusion Guidance in Endovascular Peripheral Artery Interventions: A Feasibility Study

    International Nuclear Information System (INIS)

    Sailer, Anna M.; Haan, Michiel W. de; Graaf, Rick de; Zwam, Willem H. van; Schurink, Geert Willem H.; Nelemans, Patricia J.; Wildberger, Joachim E.; Das, Marco

    2015-01-01

    PurposeThis study was designed to evaluate the feasibility of endovascular guidance by means of live fluoroscopy fusion with magnetic resonance angiography (MRA) and computed tomography angiography (CTA).MethodsFusion guidance was evaluated in 20 endovascular peripheral artery interventions in 17 patients. Fifteen patients had received preinterventional diagnostic MRA and two patients had undergone CTA. Time for fluoroscopy with MRA/CTA coregistration was recorded. Feasibility of fusion guidance was evaluated according to the following criteria: for every procedure the executing interventional radiologists recorded whether 3D road-mapping provided added value (yes vs. no) and whether PTA and/or stenting could be performed relying on the fusion road-map without need for diagnostic contrast-enhanced angiogram series (CEAS) (yes vs. no). Precision of the fusion road-map was evaluated by recording maximum differences between the position of the vasculature on the virtual CTA/MRA images and conventional angiography.ResultsAverage time needed for image coregistration was 5 ± 2 min. Three-dimensional road-map added value was experienced in 15 procedures in 12 patients. In half of the patients (8/17), intervention was performed relying on the fusion road-map only, without diagnostic CEAS. In two patients, MRA roadmap showed a false-positive lesion. Excluding three patients with inordinate movements, mean difference in position of vasculature on angiography and MRA/CTA road-map was 1.86 ± 0.95 mm, implying that approximately 95 % of differences were between 0 and 3.72 mm (2 ± 1.96 standard deviation).ConclusionsFluoroscopy with MRA/CTA fusion guidance for peripheral artery interventions is feasible. By reducing the number of CEAS, this technology may contribute to enhance procedural safety

  1. Fusion guidance in endovascular peripheral artery interventions: a feasibility study.

    Science.gov (United States)

    Sailer, Anna M; de Haan, Michiel W; de Graaf, Rick; van Zwam, Willem H; Schurink, Geert Willem H; Nelemans, Patricia J; Wildberger, Joachim E; Das, Marco

    2015-04-01

    This study was designed to evaluate the feasibility of endovascular guidance by means of live fluoroscopy fusion with magnetic resonance angiography (MRA) and computed tomography angiography (CTA). Fusion guidance was evaluated in 20 endovascular peripheral artery interventions in 17 patients. Fifteen patients had received preinterventional diagnostic MRA and two patients had undergone CTA. Time for fluoroscopy with MRA/CTA coregistration was recorded. Feasibility of fusion guidance was evaluated according to the following criteria: for every procedure the executing interventional radiologists recorded whether 3D road-mapping provided added value (yes vs. no) and whether PTA and/or stenting could be performed relying on the fusion road-map without need for diagnostic contrast-enhanced angiogram series (CEAS) (yes vs. no). Precision of the fusion road-map was evaluated by recording maximum differences between the position of the vasculature on the virtual CTA/MRA images and conventional angiography. Average time needed for image coregistration was 5 ± 2 min. Three-dimensional road-map added value was experienced in 15 procedures in 12 patients. In half of the patients (8/17), intervention was performed relying on the fusion road-map only, without diagnostic CEAS. In two patients, MRA roadmap showed a false-positive lesion. Excluding three patients with inordinate movements, mean difference in position of vasculature on angiography and MRA/CTA road-map was 1.86 ± 0.95 mm, implying that approximately 95 % of differences were between 0 and 3.72 mm (2 ± 1.96 standard deviation). Fluoroscopy with MRA/CTA fusion guidance for peripheral artery interventions is feasible. By reducing the number of CEAS, this technology may contribute to enhance procedural safety.

  2. Assessment of Spasticity With Sonoelastography Following Stroke: A Feasibility Study.

    Science.gov (United States)

    Kesikburun, Serdar; Yaşar, Evren; Adıgüzel, Emre; Güzelküçük, Ümüt; Alaca, Rıdvan; Tan, Arif Kenan

    2015-12-01

    To investigate the feasibility of sonoelastography to show muscle stiffness in poststroke spasticity, as well as the relationship between sonoelastography findings and muscle architecture features and clinical spasticity scores in the spastic gastrocnemius. Cross-sectional study. University rehabilitation center. A total of 26 stroke patients with gastrocnemius muscle spasticity (≥1 using the Modified Ashworth Scale score). None. Sonoelastography parameters (elasticity index and elasticity ratio) and muscle architecture features (muscle fascicle length, fascicle pennation angle, muscle thickness and compressibility) were measured from the medial and lateral gastrocnemius muscle on both the affected and unaffected sides. Both the elasticity index and elasticity ratio on the affected side were significantly increased in both the medial and lateral gastrocnemius compared with those on the unaffected side (P .05). Sonoelastographic findings showed a weak negative correlation with compressibility and a weak positive correlation with the Modified Ashworth Scale score in the spastic medial gastrocnemius. It was found to be feasible to assess stiffness in spastic gastrocnemius muscles of stroke patients with sonoelastography. Further studies are needed to confirm the potential role of sonoelastography to help guide treatment of spasticity and its sequelae. Copyright © 2015 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

  3. Feasibility study for the European Reliability Data System (ERDS)

    International Nuclear Information System (INIS)

    Mancini, G.

    1980-01-01

    In the framework of the Reactor Safety Programme of the Commission of the European Communities, the JRC - Ispra Establishment has performed a feasibility study for an integrated European Reliability Data System, the aim of which is the collection and organization of information related to the operation of LWRs with regard to component and systems behaviour, abnormal occurrences, outages, etc. Component Event Data Bank (CEGB), Abnormal Occurrences Reporting System, Generic Reliability Parameter Data Bank, Operating Unit Status Reports and the main activities carried out during the last two years are described. The most important achievements are briefly reported, such as: Reference Classification for Systems, Components and Failure Events, Informatic Structure of the Pilot Experiment of the CEDB, Information Retrieval System for Abnormal Occurrences Reports, Data Bank on Component Reliability Parameters, System on the Exchange of Operation Experience of LWRs, Statistical Data Treatment. Finally, the general conclusions of the feasibility study are summarized: the possibility and the usefulness for the creation of an integrated European Reliability Data System are outlined. (author)

  4. Feasibility Study of Laser Cutting for Fabrication of Tensile Specimen

    International Nuclear Information System (INIS)

    Jin, Y. G.; Baik, S. J.; Kim, G. S.; Heo, G. S.; Yoo, B. O.; Ahn, S. B.; Chun, Y. B.

    2015-01-01

    The specimen fabrication technique was established to machine the specimen from the irradiated materials. The wire cut EDM(electric discharge machine) was modified to fabricate the mechanical testing specimens from irradiated components and fuel claddings. The oxide layer removal system was also developed because the oxide layer on the surface of the irradiated components and claddings interrupted the applying the electric current during the processing. However, zirconium oxide is protective against further corrosion as well as beneficial to mechanical strength for the tensile deformation of the cladding. Thus, it is important to fabricate the irradiated specimens without removal of oxide layer on the surface of the irradiated structural components and claddings. In the present study, laser cutting system was introduced to fabricate the various mechanical testing specimens from the unirradiated fuel cladding and the feasibility of the laser cutting system was studied for the fabrication of various types of irradiated specimens in a hot cell at IMEF (Irradiated Materials Examination Facility) of KAERI. Laser beam machining system was introduced to fabricate the various mechanical testing specimens from the unirradiated fuel cladding and the dimensions were compared for the feasibility of the laser cutting system. The effect of surface oxide layer was also investigated for machining process of the zircaloy-4 fuel cladding and it was found that laser beam machining could be a useful tool to fabricate the specimens with surface oxide layer

  5. Florida Tech CubeSat Experiment Feasibility Study

    Science.gov (United States)

    Arrasmith, William W.; Bucaille, Stephane; Rusovici, Razvan; Platt, Don; Guidry, Todd; Bandar, Deepika; Coots, Everett; Davidson, Russ

    2010-01-01

    CubeSats are a relatively new type of satellite. Smaller than long-term (5+ year life expectancy) satellites, these pico-satellites are comparatively cheap, small (10x10x10 cm), and are very versatile. Universities world-wide are using CubeSats to conduct a variety of experiments in space without the need for a large experimental platform. Today CubeSats are considered to be one of the most effective ways to send a small payload into space and has attracted the attention of many educational and non-profit organizations. As this pico-satellite model continues to gain penetration into the satellite build and launch industry, it is expected that more governmental, educational, and commercial interests will emerge. As an example, more of the space-related items of high interest to the National Science Foundation may be tackled with a CubeSat platform resulting in lower life cycle costs than traditional satellite options. NASA LSP, in cooperation with the Florida Institute of Technology, has initiated a feasibility study to investigate the technical aspects of measuring and transferring vibration, acceleration, temperature, and video data from a CubeSat to NASA Hanger AE on Cape Canaveral Air Force Station (CCAFS) a.k.a. Kennedy Space Center (KSC). This report provides a technical feasibility analysis to determine whether-or-not a specific set of NASA/LSP requirements can be accomplished. Our approach has been to provide a "notional" component layout to determine the feasibility of the NASA/LSP stakeholder requirements. The notional layout is used to consider component level technical issues such as size, weight, & power (SWaP), bandwidth, and other critical technical parameters. Even though the notional components may satisfy the stated requirements and thereby demonstrate feasibility, the notional layout is NOT considered a design since no component optimization and design trade-off analysis has taken place. This activity should be accomplished in an appropriate

  6. Feasibility study for private-sector treatment services for alpha-contaminated low-level mixed wastes

    International Nuclear Information System (INIS)

    Bloom, R.R.; Rodriguez, R.R.

    1995-01-01

    Rust Federal Services, under contract to the United States Department of Energy (DOE), Idaho Operations Office, performed a study to develop and evaluate the feasibility of a suggested private sector solution for the treatment of alpha-contaminated low-level mixed waste (ALLMW) stored or produced at the Idaho National Engineering Laboratory (INEL). The feasibility study is an initial step in the potential procurement of privatized treatment services for these wastes. Rust's derived objective of the feasibility study was to define an optimal treatment system and analyze the feasibility of that system for accomplishing the processing objectives specified by DOE. All aspects of the selected treatment system were addressed in the feasibility study, including technical, regulatory, public involvement, and financial considerations. Two central elements of the study were a technology screening task to select the optimal treatment system and an analysis of the institutional, business, financial, and contractual issues that are likely to accompany the privatization of treatment services for DOE

  7. Anticipatory precrash restraint sensor feasibility study: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kercel, S.W.; Dress, W.B.

    1995-08-01

    This report explores feasibility of an anticipatory precrash restraint sensor. The foundation principle is the anticipation mechanism found at a primitive level of biological intelligence and originally formalized by the mathematical biologist Robert Rosen. A system based on formal anticipatory principles should significantly outperform conventional technologies. It offers the prospect of high payoff in prevention of death and injury. Sensors and processes are available to provide a good, fast, and inexpensive description of the present dynamical state of the vehicle to the embedded system model in the anticipation engine. The experimental part of this study found that inexpensive radar in a real-world setting does return useful data on target dynamics. The data produced by a radar system can be converted to target dynamical information by good, fast and inexpensive signal-processing techniques. Not only is the anticipatory sensor feasible, but further development under the sponsorship of the National Highway Traffic Safety Administration is necessary and desirable. There are a number of possible lines of follow-on investigation. The level of effort and expected benefits of various alternatives are discussed.

  8. A feasibility study for a manufacturing technology deployment center

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-31

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

  9. Wind height distribution influence on offshore wind farm feasibility study

    Science.gov (United States)

    Benassai, Guido; Della Morte, Renata; Matarazzo, Antonio; Cozzolino, Luca

    2015-04-01

    The economic feasibility of offshore wind power utilization depends on the favourable wind conditions offshore as compared to sites on land. The higher wind speeds have to compensate the additional cost of offshore developments. However, not only the mean wind speed is different, but the whole flow regime, as can be seen in the vertical wind speed profile. The commonly used models to describe this profile have been developed mainly for land sites, so they have to be verified on the basis of field data. Monin-Obukhov theory is often used for the description of the wind speed profile at a different height with respect to a measurement height. Starting from the former, , the profile is predicted using two parameters, Obukhov length and sea surface roughness. For situations with near-neutral and stable atmospheric stratification and long (>30km) fetch, the wind speed increase with height is larger than what is predicted from Monin-Obukhov theory. It is also found that this deviation occurs at wind speeds important for wind power utilization, mainly at 5-9 ms-1. In the present study the influence of these aspects on the potential site productivity of an offshore wind farm were investigated, namely the deviation from the theory of Monin-Obukhov due to atmospheric stability and the influence of the fetch length on the Charnock model. Both these physical effects were discussed and examined in view of a feasibility study of a site for offshore wind farm in Southern Italy. Available data consisted of time histories of wind speeds and directions collected by National Tidegauge Network (Rete Mareografica Nazionale) at the height of 10m a.s.l. in ports. The theory of Monin-Obukhov was used to extrapolate the data to the height of the wind blades, while the Charnock model was used to extend the wind speed on the sea surface from the friction velocity on the ground. The models described were used to perform calculations for a feasibility study of an offshore wind farm in Southern

  10. Associated particle neutron elemental imaging in vivo: A feasibility study.

    Science.gov (United States)

    Abel, Michael R; Koltick, David S; Nie, Linda H

    2016-11-01

    The purpose of this study is to develop a Monte Carlo simulation model for in vivo associated particle neutron elemental imaging (APNEI) and to study the feasibility of using APNEI to determine the iron distribution in a human liver with the defined model. The model presented in this study was defined in mcnp by the basic geometry of the human body, the use of D + D source neutrons, iron as the element of interest, an iron-containing voxel in the liver as the target region, and 2 large germanium detectors anterior and posterior to the trunk of the body. The f8 pulse height tally was employed in mcnp to determine the signal acquired from iron inelastic scatter gamma rays at various iron concentrations in the target liver voxel. Correspondingly, the f4 average flux tally in mcnp was modified by a dose function such that the equivalent dose to the whole liver and the effective dose to the whole body could be estimated and used as the basis for a limiting number of neutron histories which could feasibly allow for the collection of a sufficient volume of data to construct a 2D image of iron distribution in the liver voxel. Assuming an allowable equivalent dose to the liver of 5 mSv, 143 inelastic scatter iron gamma ray counts (at ∼847 keV) would ideally be registered at the germanium detectors for a 1 cm 3 cube-shaped liver voxel with an iron concentration of 1000 ppm. According to the simulation model, an image of iron distribution in the liver can be constructed with a 1 cm resolution at the level of 1000 ppm iron. Collecting such an image would yield an estimated whole body dose of 0.82 mSv. The mathematical introduction of image uncertainty resulting from source spot diameter and detector timing resolution more closely approximates the result of real world application. APNEI of certain elements in vivo appears feasible given several timing, sensitivity, and resolution caveats. However, further study is required to determine what the detection limit of iron would

  11. Preliminary economic feasibility study of MIP (Medical Isotopes Producer)

    International Nuclear Information System (INIS)

    Mon, G. H.; O, S. Y.

    2004-01-01

    Preliminary economic feasibility study of MIP (Medical Isotopes Producer), which is used liquid nuclear fuel to produce medical isotopes of Mo-99 and Sr-89, was performed. To do this, this study was estimated the IRR(Internal Rate of Return) and PBP(Pay-back Period) about optimistic and pessimistic cases for market penetration of Asia and U.S.A. isotope markets. And sensitivity analysis is also performed about capital cost and price of Mo-99 and Sr-89. According to the results, IRR was between 14.9% and 24.3%, and PBP was between 4.8 years and 7.8 years. These suggest that MIP has economic merits. MIP can produce other medical isotopes such as Sr-90, I-131, Xe-133, Cs-137. So, it is necessary to do cost-benefit analysis considering production of these other isotopes

  12. Feasibility study for a muon detector for the CBM experiment

    International Nuclear Information System (INIS)

    Dutta, Dipanwita; Lebedev, Andrey; Kiseleva, Anna; Ryzhinskiy, Mikhail; Kryshen, Evgeny

    2009-01-01

    The Compressed Baryonic Matter (CBM) experiment at the future FAIR accelerator facility at GSI, Darmstadt is being designed to investigate heavy ion collisions in fixed target mode at beam energies from 10 - 45 A GeV. The major goal is to explore the QCD phase diagram in the region of high baryon densities and at moderate temperatures. One of the proposed key observables is the measurement of charmonium via the dilepton decay channel. As leptons leave the initially produced hot and dense fireball without further interactions, they are excellent probes to study in-medium properties of vector mesons. In this contribution we will present detailed feasibility studies for a di-muon measurement in CBM

  13. Feasibility study of modern airships. Phase 2: Executive summary

    Science.gov (United States)

    1977-01-01

    A feasibility study of modern airships has been completed. Three promising modern airship systems' concepts and their associated missions were studied; (1) a heavy-lift airship, employing a non-rigid hull and a significant amount of rotor lift, used for short-range transport and positioning of heavy military and civil payloads, (2) a VTOL (vertical take-off and landing), metalclad, partially buoyant airship used as a short-haul commercial transport; and (3) a class of fully-buoyant airships used for long-endurance Navy missions. The heavy-lift airship concept offers a substantial increase in vertical lift capability over existing systems and is projected to have lower total operating costs per ton-mile. The VTOL airship transport concept appears to be economically competitive with other VTOL aircraft concepts but can attain significantly lower noise levels. The fully-buoyant airship concept can provide an airborne platform with long endurance that satisfies many Navy mission requirements.

  14. International Case-Control Study of Adult Brain, Head and Neck Tumours: Results of the Feasibility Study (invited paper)

    International Nuclear Information System (INIS)

    Cardis, E.; Kilkenny, M.

    1999-01-01

    The objectives of the feasibility study were to collect and analyse the information necessary to assess the feasibility of a multi-centric study of adult head and neck tumours (including brain tumours) and mobile telephones. Information was obtained on the availability and accessibility of records from companies, the prevalence of mobile telephone use over time and the expected number of tumour cases in the proposed study regions. The conclusion is that it is feasible to develop a study of the relation between mobile telephone use and brain cancer risk. The feasibility of a study of the relation between radiofrequency exposure and cancer risk is, however, unclear at present. It is unknown whether a sufficiently accurate and precise RF exposure gradient can be derived to classify adequately each subject in the proposed study. A study of the relation between mobile telephone use and risk of salivary gland tumours and acoustic neurinomas is probably feasible, but more information is required about the logistic difficulties of ascertaining these cases in the study regions. Two subcommittees have been formed to develop the exposure measurement and epidemiological aspect of the study. (author)

  15. 76 FR 71601 - Record of Decision, Long Walk National Historic Trail Feasibility Study/Abbreviated Final...

    Science.gov (United States)

    2011-11-18

    ... National Park Service Record of Decision, Long Walk National Historic Trail Feasibility Study/Abbreviated... Environmental Impact Statement for the Long Walk National Historic Trail Feasibility Study. SUMMARY: Pursuant to... Statement for the Long Walk National Historic Trail Feasibility Study, prepared by National Trails...

  16. Feasibility studies for a wireless 60 GHz tracking detector readout

    CERN Document Server

    Dittmeier, Sebastian; Soltveit, Hans Kristian; Wiedner, Dirk

    2016-01-01

    The amount of data produced by highly granular silicon tracking detectors in high energy physics experiments poses a major challenge to readout systems. At high collision rates, e.g. at LHC experiments, only a small fraction of data can be read out with currently used technologies. To cope with the requirements of future or upgraded experiments new data transfer techniques are required which offer high data rates at low power and low material budget. Wireless technologies operating in the 60 GHz band or at higher frequencies offer high data rates and are thus a promising upcoming alternative to conventional data transmission via electrical cables or optical fibers. Using wireless technology, the amount of cables and connectors in detectors can be significantly reduced. Tracking detectors profit most from a reduced material budget as fewer secondary particle interactions (multiple Coulomb scattering, energy loss, etc.) improve the tracking performance in general. We present feasibility studies regarding the in...

  17. Feasibility study of an active target for the MEG experiment

    Energy Technology Data Exchange (ETDEWEB)

    Papa, A., E-mail: angela.papa@psi.ch [Paul Scherrer Institut PSI, CH-5232 Villigen (Switzerland); Cavoto, G. [INFN Sezione di Roma, P.le Aldo Moro, 2, 00185 Roma (Italy); Ripiccini, E. [INFN Sezione di Roma, P.le Aldo Moro, 2, 00185 Roma (Italy); Dipartimento di Fisica dell' Università degli studi di Roma, P.le Aldo Moro, 2, 00185 Roma (Italy)

    2014-03-01

    We consider the possibility to have an active target for the upgrade of the MEG experiment (MEG II). The active target should work as (1) a beam monitoring, to continuously measure the muon stopping rate and therefore provide a direct evaluation of the detector acceptance (or an absolute normalization of the stopped muon); and as (2) an auxiliary device for the spectrometer, to improve the determination of the muon decay vertex and consequently to achieve a better positron momentum and angular resolutions, detecting the positron from the muon decay. In this work we studied the feasibility of detecting minimum ionizing particle with a single layer of 250 μm fiber and the capability to discriminate between the signal induced by either a muon or a positron.

  18. Technical Feasibility Study for Zero Energy K-12 Schools

    Energy Technology Data Exchange (ETDEWEB)

    Pless, Shanti D.; Torcellini, Paul A.; Bonnema, Eric; Goldwasser, David

    2016-08-26

    A simulation-based technical feasibility study was completed to show the types of technologies required to achieve ZEB status with this building type. These technologies are prioritized across the building's subsystem such that design teams can readily integrate the ideas. Energy use intensity (EUI) targets were established for U.S. climate zones such that K-12 schools can be zero-ready or can procure solar panels or other renewable energy production sources to meet the zero energy building definition. Results showed that it is possible for K-12 schools to achieve zero energy when the EUI is between 20 and 26 kBtu/ft2/yr. Temperate climates required a smaller percentage of solar panel coverage than very hot or very cold climates. The paper provides a foundation for technically achieving zero energy schools with a vision of transforming the school construction market to mainstream zero energy buildings within typical construction budgets.

  19. Cherokee Wind Energy Development - Feasibility and Pre-Construction Studies

    Energy Technology Data Exchange (ETDEWEB)

    McMillan, Andy [Cherokee Nation Businesses, LLC, Catoosa, OK (United States)

    2017-06-30

    Cherokee Nation Businesses (CNB) received a grant from the US Department of Energy to explore feasibility and pursue development of a wind power generation facility on Cherokee land in north-central Oklahoma. This project followed several years of initial study exploring the possibility of commercial-scale wind power generation on primarily agricultural land owned by the Cherokee Nation. This project produced detailed analysis of the legal, financial and market viability of such generation facilities, and encompassed a full technical evaluation of the engineering, environmental, and geotechnical aspects of installing this capacity. During the course of this project, information gleaned from this exploration changed CNB’s thinking about the best course of action for Cherokee participation in the development, eventually moving away from an equity-owner model and towards utilization of the land asset as a resource while mitigating Cherokee financial and operational risk.

  20. Pilot Feasibility Study of an Oncology Financial Navigation Program.

    Science.gov (United States)

    Shankaran, Veena; Leahy, Tony; Steelquist, Jordan; Watabayashi, Kate; Linden, Hannah; Ramsey, Scott; Schwartz, Naomi; Kreizenbeck, Karma; Nelson, Judy; Balch, Alan; Singleton, Erin; Gallagher, Kathleen; Overstreet, Karen

    2018-02-01

    Few studies have reported on interventions to alleviate financial toxicity in patients with cancer. We developed a financial navigation program in collaboration with our partners, Consumer Education and Training Services (CENTS) and Patient Advocate Foundation (PAF), to improve patient knowledge about treatment costs, provide financial counseling, and to help manage out-of-pocket expenses. We conducted a pilot study to assess the feasibility and impact of this program. Patients with cancer received a financial education course followed by monthly contact with a CENTS financial counselor and a PAF case manager for 6 months. We measured program adherence, self-reported financial burden and anxiety, program satisfaction, and type of assistance provided. Thirty-four patients (median age, 60.5 years) were consented (85% white and 50% commercially insured). Debt, income declines, and loans were reported by 55%, 55%, and 30% of patients, respectively. CENTS counselors assisted most often with budgeting, retirement planning, and medical bill questions. PAF case managers assisted with applications for appropriate insurance coverage, cost of living issues (eg, housing, transportation), and disability applications. High financial burden and anxiety about costs (4 or 5 on a Likert scale) were reported at baseline by 37% and 47% of patients, respectively. Anxiety about costs decreased over time in 33% of patients, whereas self-reported financial burden did not substantially change. Implementing an oncology financial navigation program is feasible, provides concrete assistance in navigating the cost of care, and mitigates anxiety about costs in a subset of patients. Future work will focus on measuring the program's impact on financial and clinical outcomes.

  1. Feasibility Study on Solar District Heating in China

    DEFF Research Database (Denmark)

    Huang, Junpeng; Fan, Jianhua; Furbo, Simon

    This paper analyzes the feasibility of developing solar district heating (SDH) in China from the perspective of incentive policy, selections of technical route, regional adaptability and economic feasibility for clean heating. Based on the analyzation, this proposes a road map for the development...

  2. Feasibility study of gamma-ray medical radiography

    International Nuclear Information System (INIS)

    Alyassin, Abdalmajeid M.; Maqsoud, Hamza A.; Mashat, Ahmad M.; Al-Mohr, Al-Sayed; Abdulwajid, Subhan

    2013-01-01

    This research explores the feasibility of using gamma-ray radiography in medical imaging. We will show that gamma-ray medical radiography has the potential to provide alternative diagnostic medical information to X-ray radiography. Approximately one Ci Am-241 radioactive source which emits mono-energetic 59.5 keV gamma rays was used. Several factors that influence the feasibility of this study were tested. They were the radiation source uniformity, image uniformity, and image quality parameters such as contrast, noise, and spatial resolution. In addition, several gamma-ray and X-ray images were acquired using humanoid phantoms. These images were recorded on computed radiography image receptors and displayed on a standard monitor. Visual assessments of these images were then conducted. The Am-241 radioactive source provided relatively uniform radiation exposure and images. Image noise and image contrast were mainly dependent on the exposure time and source size, whereas spatial resolution was dependent on source size and magnification factor. The gamma-ray humanoid phantom images were of lower quality than the X-ray images mainly due to the low radioactivity used and not enough exposure time. Nevertheless, the gamma-ray images displayed most of the main structures contained in the humanoid phantoms. Higher exposure rates and thus lower exposure times were estimated for different pure Am-241 source sizes that are hypothesized to provide high quality images similar to X-ray images. For instance, a 10 mm source size of pure Am-241 with 7 s exposure time should produce images similar in contrast and noise to X-ray images. This research paves the way for the production and usage of a highly radioactive Am-241 source with the potential to lead to the feasibility of acceptable quality medical gamma-ray radiography. - Highlights: ► Characterized the performance of gamma-ray radiography. ► Displayed medical images of humanoid phantoms using gamma radiography. ► Am-241

  3. INTEC High-Level Waste Studies Universal Solvent Extraction Feasibility Study

    International Nuclear Information System (INIS)

    Banaee, J.; Barnes, C.M.; Battisti, T.; Herrmann, S.; Losinski, S.J.; McBride, S.

    2000-01-01

    This report summarizes a feasibility study that has been conducted on the Universal Solvent Extraction (UNEX) Process for treatment and disposal of 4.3 million liters of INEEL sodium-bearing waste located at the Idaho Nuclear Technology and Engineering Center. This feasibility study covers two scenarios of treatment. The first, the UNEX Process, partitions the Cs/Sr from the SBW and creates remote-handled LLW and contact-handled TRU waste forms. Phase one of this study, covered in the 30% review documents, dealt with defining the processes and defining the major unit operations. The second phase of the project, contained in the 60% review, expanded on the application of the UNEX processes and included facility requirements and definitions. Two facility options were investigated for the UNEX process, resulting in a 2 x 2 matrix of process/facility scenarios as follows: Option A, UNEX at Greenfield Facility, Option B, Modified UNEX at Greenfield Facility, Option C, UNEX at NWCF, th is document, covers life-cycle costs for all options presented along with results and conclusions determined from the study

  4. Material Identification Technology (MIT) concept technical feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Jones, J.L.; Harker, Y.D.; Yoon, W.Y.; Johnson, L.O.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) has initiated the design and development of a novel pulsed accelerator-based, active interrogation concept. The proposed concept, referred to as the Material Identification Technology (MIT), enables rapid (between accelerator pulses), non-destructive, elemental composition analysis of both nuclear and non-nuclear materials. Applications of this technique include material monitoring in support of counter-proliferation activities, such as export controls (at domestic and international inspection locations), SNM controls, nuclear weapon dismantlement, and chemical weapon verification. Material Identification Technology combines a pulsed, X-ray source (an electron accelerator) and a gamma detection system. The accelerator must maximize neutron production (pulse width, beam current, beam energy, and repetition rate) and minimize photon dose to the object. Current available accelerator technology can meet these requirements. The detection system must include detectors which provide adequate gamma energy resolution capability, rapid recovery after the initial X-ray interrogation pulse, and multiple single gamma event detection between accelerator pulses. Further research is required to develop the detection system. This report provides the initial feasibility assessment of the MIT concept.

  5. Feasibility of remote sensing for detecting thermal pollution. Part 1: Feasibility study. Part 2: Implementation plan. [coastal ecology

    Science.gov (United States)

    Veziroglu, T. N.; Lee, S. S.

    1973-01-01

    A feasibility study for the development of a three-dimensional generalized, predictive, analytical model involving remote sensing, in-situ measurements, and an active system to remotely measure turbidity is presented. An implementation plan for the development of the three-dimensional model and for the application of remote sensing of temperature and turbidity measurements is outlined.

  6. Feasibility studies - Oesthammar, Nykoeping, Oskarshamn, Tierp, Hultsfred and Aelvkarleby. Summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    Swedish Nuclear Fuel and Waste Management Company, SKB, has carried out feasibility studies on a municipal scale as a part of the siting programme for the deep repository for spent nuclear fuel. Final reports describing the results of the six feasibility studies in Oesthammar, Nykoeping, Oskarshamn, Tierp, Aelvkarleby and Hultsfred were submitted during the autumn and winter of 2000/2001. With this as a basis, the siting work can now proceed to the next phase - site investigations. In this stage, investigations that include test drilling will be conducted on at least two sites. In December 2000, SKB published the report 'Integrated account of method, site selection and programme prior to the site investigation phase', in which SKB stipulates where they want to conduct site investigations and how they will be carried out. The report is being reviewed by the Swedish Nuclear Power Inspectorate during the first half of 2001. Before the site investigations can be initiated,the go-ahead is required from the national safety authorities, the Government, and concerned municipalities and landowners. SKB projects that the it will be possible to commence the site investigations in 2002. This report comprises an English summary of the final reports from the six feasibility studies. The report summarizes the most important results and conclusions from the different feasibility studies. All six final reports are available in their entirety in Swedish.

  7. A feasibility study comparing two chiropractic protocols in the treatment of patellofemoral pain syndrome.

    Science.gov (United States)

    Brantingham, James W; Globe, Gary A; Jensen, Muffit L; Cassa, Tammy K; Globe, Denise R; Price, Jennifer L; Mayer, Stephan N; Lee, Felix T

    2009-09-01

    The purpose of this pilot study was to determine the feasibility of (1) using the existing clinic, clinicians, interns, faculty, and staff from our college in conducting all components of a planned randomized controlled clinical trial; (2) successfully recruiting patients with patellofemoral pain syndrome (PFPS); and (3) consistently, effectively, and safely implementing the study protocols and therapy. Diagnostic, treatment, and blind assessment procedures were carried out while recruitment and administrative techniques for managing long-term storage of data and files were developed. Thirty-one patients were randomized into a local manipulative group (group A) or to a full kinetic chain manipulative therapy group (group B), each combined with exercise and soft tissue treatment. The Anterior Knee Pain Scale, visual analog scale, and Patient Satisfaction Scale were used. All phases of the feasibility study including use of the clinic, staff, recruitment techniques, treatment protocols, data collection, input, and analysis were effectively and safely carried out. A feasibility study investigating the ability to conduct a randomized controlled trial of a manipulative therapy protocol for PFPS using available chiropractic college infrastructure was accomplished. A fully powered PFPS trial is feasible and merited.

  8. Feasibility studies - Oesthammar, Nykoeping, Oskarshamn, Tierp, Hultsfred and Aelvkarleby. Summary report

    International Nuclear Information System (INIS)

    2001-06-01

    Swedish Nuclear Fuel and Waste Management Company, SKB, has carried out feasibility studies on a municipal scale as a part of the siting programme for the deep repository for spent nuclear fuel. Final reports describing the results of the six feasibility studies in Oesthammar, Nykoeping, Oskarshamn, Tierp, Aelvkarleby and Hultsfred were submitted during the autumn and winter of 2000/2001. With this as a basis, the siting work can now proceed to the next phase - site investigations. In this stage, investigations that include test drilling will be conducted on at least two sites. In December 2000, SKB published the report 'Integrated account of method, site selection and programme prior to the site investigation phase', in which SKB stipulates where they want to conduct site investigations and how they will be carried out. The report is being reviewed by the Swedish Nuclear Power Inspectorate during the first half of 2001. Before the site investigations can be initiated,the go-ahead is required from the national safety authorities, the Government, and concerned municipalities and landowners. SKB projects that the it will be possible to commence the site investigations in 2002. This report comprises an English summary of the final reports from the six feasibility studies. The report summarizes the most important results and conclusions from the different feasibility studies. All six final reports are available in their entirety in Swedish

  9. Dynamic electron arc radiotherapy (DEAR): a feasibility study

    International Nuclear Information System (INIS)

    Rodrigues, Anna; Yin, Fang-Fang; Wu, Qiuwen

    2014-01-01

    Compared to other radiation therapy modalities, clinical electron beam therapy has remained practically unchanged for the past few decades even though electron beams with multiple energies are widely available on most linacs. In this paper, we present the concept of dynamic electron arc radiotherapy (DEAR), a new conformal electron therapy technique with synchronized couch motion. DEAR utilizes combination of gantry rotation, couch motion, and dose rate modulation to achieve desirable dose distributions in patient. The electron applicator is kept to minimize scatter and maintain narrow penumbra. The couch motion is synchronized with the gantry rotation to avoid collision between patient and the electron cone. In this study, we investigate the feasibility of DEAR delivery and demonstrate the potential of DEAR to improve dose distributions on simple cylindrical phantoms. DEAR was delivered on Varian's TrueBeam linac in Research Mode. In conjunction with the recorded trajectory log files, mechanical motion accuracies and dose rate modulation precision were analyzed. Experimental and calculated dose distributions were investigated for different energies (6 and 9 MeV) and cut-out sizes (1×10 cm 2  and 3×10 cm 2  for a 15×15 cm 2  applicator). Our findings show that DEAR delivery is feasible and has the potential to deliver radiation dose with high accuracy (root mean square error, or RMSE of <0.1 MU, <0.1° gantry, and <0.1 cm couch positions) and good dose rate precision (1.6 MU min −1 ). Dose homogeneity within ±2% in large and curved targets can be achieved while maintaining penumbra comparable to a standard electron beam on a flat surface. Further, DEAR does not require fabrication of patient-specific shields. These benefits make DEAR a promising technique for conformal radiotherapy of superficial tumors. (paper)

  10. Feasibility Study on the Development of Proton Accelerator II

    Energy Technology Data Exchange (ETDEWEB)

    Whang, Ki Woong [Korea Accelerator and Plasma Research Association, Seoul (Korea, Republic of)

    1997-09-01

    Present status and research trend of KOMAC (Korea Multipurpose Accelerator Complex)-grade accelerator construction in Europe, Japan, America, and Russia are surveyed in view of basic nuclear technology study in 2nd feasibility study on the KOMAC. KOMAC can be applied to study the increasing of nuclear reactor safety, the Proto-plant of transmutation technology for low cost nuclear fuel, the nuclear data production, the life science, mechanical dynamics, the structure probe, the radioisotope production, the cancer therapy, and the defense industry etc. And also KOMAC structure selection is investigated in point of utilization aims referred from various proposal of LANL and ORNL in USA, Neutron Science Research program in Japan, Energy Amplifier in Europe, and Institute of Theoretical and Experimental physics in Russia. As a result of meeting, study team is approached to the conclusion the KOMAC should be constructed to get the nuclear transmutation technology and the world leadership in future nuclear industry. Member`s opinion of study team agreed new nuclear technology, such as Accelerator Driven Energy Amplifier will be possible to sustain a survival of human being in post 21c. 7 tabs., 10 figs. (author)

  11. Solar feasibility study for site-specific industrial-process-heat applications. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Murray, O.L.

    1980-03-18

    This study addresses the technical feasibility of solar energy in industrial process heat (IPH) applications in Mid-America. The study was one of two contracted efforts covering the MASEC 12-state region comprised of: Illinois, Michigan, North Dakota, Indiana, Minnesota, Ohio, Iowa, Missouri, South Dakota, Kansas, Nebraska, Wisconsin. The results of our study are encouraging to the potential future role of solar energy in supplying process heat to a varied range of industries and applications. We identified and developed Case Study documentation of twenty feasible solar IPH applications covering eight major SIC groups within the Mid-American region. The geographical distribution of these applications for the existing range of solar insolation levels are shown and the characteristics of the applications are summarized. The results of the study include process identification, analysis of process heat requirements, selection of preliminary solar system characteristics, and estimation of system performance and cost. These are included in each of the 20 Case Studies. The body of the report is divided into two primary discussion sections dealing with the Study Methodology employed in the effort and the Follow-On Potential of the identified applications with regard to possible demonstration projects. The 20 applications are rated with respect to their relative overall viability and procedures are discussed for possible demonstration project embarkment. Also, a possible extension of this present feasibility study for late-comer industrial firms expressing interest appears worthy of consideration.

  12. Steps for preparing uranium production feasibility studies: A guidebook

    International Nuclear Information System (INIS)

    1996-06-01

    Uranium exploration, development and eventual production, form a series of progressive and logical steps. Each step is part of a progression of activities with the objective of obtaining new or additional information from which a crucial decision is to be made. This guidebook is primarily aimed at mineral management personnel in developing countries who have little or no experience in preparing feasibility studies in uranium production. It is not a textbook which describes the geology, mining or processing of uranium. This guidebook deals with the philosophy, basic principles and important factors in the various stages of economic evaluation of the project. This guidebook is primarily concerned with small to medium sized mining projects. However, it can also provide useful guidance for the initial study of larger mining projects. More detailed studies of larger projects, however, should be left to well known experts in the field. While the mineral commodity in question is uranium, the procedures and approaches outlined in this guidebook are generally applicable to the study of other commodities. Refs, figs, tabs

  13. Feasibility study for the computerized automation of the Laboratory Services Branch of EPA Region IV

    International Nuclear Information System (INIS)

    Boyle, W.G. Jr.; Barton, G.W. Jr.; Taber, L.

    1978-01-01

    This report is a study of the feasibility of computerized automation of the Laboratory Services Branch of the Environmental Protection Agency's Region IV. The LSB provides chemical analytical support for a number of EPA divisions; its primary function at present is compliance monitoring, field surveys, and oil identification. Automation of the LSB is not only feasible but also highly desirable. Automation systems are proposed that will make major improvements in analytical capacity, quality control, sample management, and reporting capabilities. Most of these automation systems are similar to those already developed and installed at other EPA laboratories. These systems have options that include limited modifications suggested as a result of the study of the LSB Laboratory, and also include communications hardware and software for a Sample File Control host computer. It is estimated that the initial cost of three of the four options considered would be recouped in approximately three years through increased capacity and efficiency of operation

  14. Smoking cessation research via the internet: a feasibility study.

    Science.gov (United States)

    Stoddard, Jacqueline; Delucchi, Kevin; Muñoz, Ricardo; Collins, Noah; Stable, Eliseo Pérez; Augustson, Erik; Lenert, Leslie

    2005-01-01

    To reverse the present stagnation in progress toward reduced smoking rates, new widely accessible treatment methods for smoking cessation must be developed and evaluated with large groups of smokers. We tested the feasibility of conducting a smoking cessation study over the Internet using a brief, self-help educational intervention. Through a direct e-mail sent from a large health information web site (WebMD), and with our presence on the Internet, we recruited 538 adult smokers to the study. Most participants (90.5%) completed all baseline questionnaires. Questionnaires showed acceptable to good reliability and were comparable with studies using paper-and-pencil methods. Participants appeared to be highly dependent on nicotine. Forty-two percent indicated being ready to quit smoking at baseline. At 1-month follow-up, 42.8% of baseline participants returned a complete follow-up questionnaire, 40% of whom indicated having made a serious quit attempt, and 8.3% of whom indicated 7-day abstinence. Most follow-up participants rated the site as at least somewhat helpful to quitting (74.9%) and reported at least a slight increased intention to quit smoking over baseline (67.3%). While Internet-enabled self-help interventions for smoking cessation are able to reach large numbers of smokers interested in quitting smoking, additional procedures are needed to retain these users for treatment and follow-up assessments.

  15. Feasibility study for PTV measurement using x-ray holography

    International Nuclear Information System (INIS)

    Uemura, Tomomasa; Yamamoto, Yasufumi; Murata, Shigeru; Nishio, Shigeru; Iguchi, Manabu; Uesugi, Kentaro

    2005-01-01

    Some X-ray imaging techniques are examined for a feasibility study for micro-PIV in this study. There are three X-ray imaging method, the absorption contrast method, the refraction contrast method, and the phase contrast method. The first one is a common method but its spatial resolution is rather poor. The 2nd method corresponds to the Schlieren method that utilizes refraction of parallel light. The characteristics of the method, edge enhancement, can be effective in extracting tracer images. The third method is a kind of holography methods, and this method can record fine tracer particles. Among the three methods, the second and the third method are seemed to be applicable to PIV imaging, and those methods need a parallel X-ray. The SPring-8, the synchrotron radiation facility in Harima, is utilized. There are some methods to realize phase contrast image, most of them requires ultra-high precision in optical alignment. In the present study, though a coherent source is indispensable, the simplest and robust holography method, the inline holography, is used to take phase contrast pictures. (author)

  16. Quantification of manganese in human hand bones: a feasibility study

    Science.gov (United States)

    Aslam; Pejović-Milić, A.; Chettle, D. R.; McNeill, F. E.

    2008-08-01

    Manganese is both an essential element to human health and also toxic when humans are exposed to excessive levels, particularly by means of inhalation. Biological monitoring of manganese exposure is problematic. It is subject to homeostasis; levels in blood (or serum/plasma) reflect only the most recent exposure and rapidly return to within normal ranges, even when there has been a temporary excursion in response to exposure. In this context, we have been developing a non-invasive technique for measurement of manganese stored in bone, using in vivo neutron activation analysis. Following preliminary feasibility studies, the technique has been enhanced by two significant infrastructure advances. A specially designed irradiation facility serves to maximize the activation of manganese with respect to the dose of ionizing radiation. Secondly, an array of eight NaI(Tl) crystals provides a detection system with very close to 4π geometry. This feasibility study, using neutron activation analysis to measure manganese in the bones of the hand, takes two features into account. Firstly, there is considerable magnesium present in the bone and this produces a spectral interference with the manganese. The 26Mg(n,γ)27Mg reaction produces γ-rays of 0.843 MeV from the decay of 27Mg, which interfere with the 0.847 MeV γ-rays from the decay of 56Mn, produced by the 55Mn(n,γ)56Mn reaction. Secondly, this work provides estimates of the levels of manganese to be expected in referent subjects. A revised estimate has been made from the most recent literature to explore the potential of the technique as a suitable means of screening patients and people exposed to excessive amounts of Mn who could develop many-fold increased levels of Mn in bones as demonstrated through various animal studies. This report presents the enhancements to the neutron activation system, by which manganese can be measured, which resulted in a detection limit in the hand of human subjects of 1.6 µg/g Ca. It

  17. Web-Based Depression Screening and Psychiatric Consultation for College Students: A Feasibility and Acceptability Study

    OpenAIRE

    Williams, Aya; LaRocca, Rachel; Chang, Trina; Trinh, Nhi-Ha; Fava, Maurizio; Kvedar, Joseph; Yeung, Albert

    2014-01-01

    Background. A steady rise in the prevalence of depression among college students has negatively affected student quality of life. This study investigates the feasibility and acceptability of a Web-based model, including Skype, to screen and provide psychiatric consultation to depressed college students. Methods. Students completed the 9-item Patient Health Questionnaire (PHQ-9) online; those who screened positive (PHQ-9 ≥ 10) or endorsed any level of suicidal ideation were offered Web-based p...

  18. Canton hydroelectric project: feasibility study. Final report, appendices

    Energy Technology Data Exchange (ETDEWEB)

    1979-05-01

    These appendices contain legal, environmental, regulatory, technical and economic information used in evaluating the feasibility of redeveloping the hydroelectric power generating facilities at the Upper and Lower Dams of the Farmington River at Collinsville, CT. (LCL)

  19. Development of Bioavailability Adjustment Factors: A Feasibility Study

    National Research Council Canada - National Science Library

    Rembish, Steve

    2000-01-01

    The primary purpose of this effort is to investigate the feasibility of developing and using bioavailability adjustment factors to modify intake assumptions used in risk assessments on a site-specific basis...

  20. Status report on studies to assess the feasibility of storing nuclear waste in Columbia Plateau basalts

    International Nuclear Information System (INIS)

    Deju, R.A.; Evans, G.C.

    1979-11-01

    The Basalt Waste Isolation Project, is part of the National Waste Terminal Storage Program. The program, as presently structured, is aimed at assessing the feasibility and providing the technology needed to design and construct a repository for storage of commercial radioactive waste in the extensive basalts beneath the Hanford Site of the United States Department of Energy. The program is presently in the research and development phase to assess feasibility. Geologic site selection studies are to be completed in September 1981, to allow a feasibility decision at that time, where-upon if feasibility is proven and the United States Department of Energy goes forward with the project, we would move into the licensing phase of the project. Ultimately, it would be up to the United States Nuclear Regulatory Commission to grant a construction license and, later on, an operating license. During the research and development phase, the program includes seven areas of study; namely, geosciences, hydrology multiple engineered barriers, test facility design and construction, engineering testing, systems integration, and preliminary repository engineering design. The progress made to date in each of these areas is detailed

  1. Computing with words to feasibility study of software projects

    Directory of Open Access Journals (Sweden)

    Marieta Peña Abreu

    2017-02-01

    Full Text Available Objective: This paper proposes a method to analyze the technical, commercial and social feasibility of software projects in environments of uncertainty. It allows working with multiple experts and multiple criteria and facilitates decision-making. Method: The proposal contains two phases, first the necessary information is collected and in second place projects are evaluated using 2-tuple linguistic representation model. The experts are selected by analyzing their curricular synthesis. The evaluation criteria are defined using the technique Focus Group and weighted in the interval (0,1 according to their importance. three domains are offered to express the preferences: numeric, interval-valued and linguistic. For aggregation extended arithmetic mean and weighted average extended are used, preventing the loss of information. A 2-tuple (feasibility, precision is obtained as a result for each project. Results: The evaluation of P1 project was a very high feasibility with -0,33 of precision. The P2 project obtained a high feasibility with 0,38 of precision and P3 project achieved a medium feasibility with -0,21 of precision. Conclusions: This method is favorable for software projects feasibility analysis with presence of multiple experts and criteria, in environments of uncertainty. It tries heterogeneous assessments without loss of information. Their results are consistent and useful for decision makers.

  2. Feasibility study of using industrial robot for ultrasound testing

    Energy Technology Data Exchange (ETDEWEB)

    Hsia, T.C. (California Univ., Davis, CA (USA). Dept. of Electrical Engineering and Computer Science)

    1989-02-13

    The purpose of this program is to study the feasibility of employing an articulated industrial robot arm to perform ultrasound scanning of a work piece. The robot arm suitable for such application is the Unimation PUMA 560 manipulator with six degrees of freedom. This research is intended to study the basic properties of several issues which arise in the operations of the UTB facility at LLNL. These issues involve the understanding of control algorithms for collision-free motions of the robot arm with and without redundant kinematics, trajectory generation schemes for automated surface tracking based on 3D CAD/CAM model of the work piece, and the effective use of computer vision and ultrasound sensor to achieve position calibration of a work piece and on-line trajectory modification for accurate surface tracking. The robotics research laboratory at UC Davis has a research robotic system based on a six degrees-of-freedom Unimation PUMA 560 arm and a VAL-II controller. This system is used as a research tool for the investigation. 20 refs., 8 figs.

  3. Feasibility study of an image slicer for future space application

    Science.gov (United States)

    Calcines, A.; Ichimoto, K.

    2014-08-01

    This communication presents the feasibility study of an image slicer for future space missions, especially for the integral field unit (IFU) of the SUVIT (Solar UV-Visible-IR telescope) spectro-polarimeter on board the Japanese-led solar space mission Solar-C as a backup option. The MuSICa (Multi-Slit Image slicer based on collimator-Camera) image slicer concept, originally developed for the European Solar Telescope, has been adapted to the SUVIT requirements. The IFU will reorganizes a 2-D field of view of 10 x 10 arcsec2 into three slits of 0.18 arcsec width by 185.12 arcsec length using flat slicer mirrors of 100 μm width. The layout of MuSICa for Solar-C is telecentric and offers an optical quality limited by diffraction. The entrance for the SUVIT spectro-polarimeter is composed by the three IFU slits and one ordinal long slit to study, using high resolution spectro-polarimetry, the solar atmosphere (Photosphere and Chromosphere) within a spectral range between 520 nm (optionally 280 nm) and 1,100 nm.

  4. A feasibility study of a linear laser heated solenoid fusion reactor. Final report

    International Nuclear Information System (INIS)

    Steinhauer, L.C.

    1976-02-01

    This report examines the feasibility of a laser heated solenoid as a fusion or fusion-fission reactor system. The objective of this study, was an assessment of the laser heated solenoid reactor concept in terms of its plasma physics, engineering design, and commercial feasibility. Within the study many pertinent reactor aspects were treated including: physics of the laser-plasma interaction; thermonuclear behavior of a slender plasma column; end-losses under reactor conditions; design of a modular first wall, a hybrid (both superconducting and normal) magnet, a large CO 2 laser system; reactor blanket; electrical storage elements; neutronics; radiation damage, and tritium processing. Self-consistent reactor configurations were developed for both pure fusion and fusion-fission designs, with the latter designed both to produce power and/or fissile fuels for conventional fission reactors. Appendix A is a bibliography with commentary of theoretical and experimental studies that have been directed at the laser heated solenoid

  5. Dissemination of Evidence From Systematic Reviews Through Academic CME Providers: A Feasibility Study.

    Science.gov (United States)

    Fordis, Michael; King, Jason E; Bonaduce de Nigris, Francesca; Morrow, Robert; Baron, Robert B; Kues, John R; Norton, James C; Kessler, Harold; Mazmanian, Paul E; Colburn, Lois

    2016-01-01

    Although systematic reviews represent a source of best evidence to support clinical decision-making, reviews are underutilized by clinicians. Barriers include lack of awareness, familiarity, and access. Efforts to promote utilization have focused on reaching practicing clinicians, leaving unexplored the roles of continuing medical education (CME) directors and faculty in promoting systematic review use. This study explored the feasibility of working with CME directors and faculty for that purpose. A convenience sample of five academic CME directors and faculty agreed to participate in a feasibility study exploring use in CME courses of systematic reviews from the Agency for Healthcare Research and Quality (AHRQ-SRs). AHRQ-SR topics addressed the comparative effectiveness of health care options. Participants received access to AHRQ-SR reports, associated summary products, and instructional resources. The feasibility study used mixed methods to assess 1) implementation of courses incorporating SR evidence, 2) identification of facilitators and barriers to integration, and 3) acceptability to CME directors, faculty, and learners. Faculty implemented 14 CME courses of varying formats serving 1700 learners in urban, suburban, and rural settings. Facilitators included credibility, conciseness of messages, and availability of supporting materials; potential barriers included faculty unfamiliarity with SRs, challenges in maintaining review currency, and review scope. SR evidence and summary products proved acceptable to CME directors, course faculty, and learners by multiple measures. This study demonstrates the feasibility of approaches to use AHRQ-SRs in CME courses/programming. Further research is needed to demonstrate generalizability to other types of CME providers and other systemic reviews.

  6. Feasibility and Safety of Pressurized Intraperitoneal Aerosol Chemotherapy for Peritoneal Carcinomatosis: A Retrospective Cohort Study

    Directory of Open Access Journals (Sweden)

    Martin Hübner

    2017-01-01

    Full Text Available Background. Pressurized intraperitoneal aerosol chemotherapy (PIPAC has been introduced as a novel repeatable treatment for peritoneal carcinomatosis. The available evidence from the pioneer center suggests good tolerance and high response rates, but independent confirmation is needed. A single-center cohort was analyzed one year after implementation for feasibility and safety. Methods. PIPAC was started in January 2015, and every patient was entered into a prospective database. This retrospective analysis included all consecutive patients operated until April 2016 with emphasis on surgical feasibility and early postoperative outcomes. Results. Forty-two patients (M : F = 8 : 34, median age 66 (59–73 years with 91 PIPAC procedures in total (4×: 1,  3×: 17,  2×: 12, and  1×: 12 were analyzed. Abdominal accessibility rate was 95% (42/44; laparoscopic access was not feasible in 2 patients with previous HIPEC. Median initial peritoneal carcinomatosis index (PCI was 10 (IQR 5–17. Median operation time was 94 min (89–108 with no learning curve observed. One PIPAC application was postponed due to intraoperative intestinal lesion. Overall morbidity was 9% with 7 minor complications (Clavien I-II and one PIPAC-unrelated postoperative mortality. Median postoperative hospital stay was 3 days (2-3. Conclusion. Repetitive PIPAC is feasible in most patients with refractory carcinomatosis of various origins. Intraoperative complications and postoperative morbidity rates were low. This encourages prospective studies assessing oncological efficacy.

  7. Majorana One-Tonne Cryostat Cooling Conceptual Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Reid, Douglas J.; Orrell, John L.; Fast, James E.; Aguayo Navarrete, Estanislao

    2011-02-17

    This report evaluates the conceptual plans for a one-tonne (S4) cryostat cooling design. This document is based upon previous design work and experimental results used to evaluate the current MAJORANA DEMONSTRATOR (MJD) thermal design. A feasibility study of a cooling system for S4 based on the MJD thermosyphon experiment is presented. The one-tonne experiment will be a scaled up version of the MJD. There will be many cryostats for the S4 experiment. In this document a cryostat with up to 19 strings of Germanium crystals is analyzed. Aside from an extra outer ring of crystals, the geometry of both systems’ cryostats is very similar. The materials used in the fabrication of both ultra-low background experiments will be underground electroformed copper. The current MJD uses a two-phase liquid-gas cooling system to ensure constant operating temperature. This document presents a theoretical investigation of a cooling system for the S4 experiment and evaluates the heat transfer performance requirements for such a system.

  8. Feasibility study of ultra long distance HVDC transmission to Japan

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, M.; Hano, T.; Souichirou [Tsukuba Univ. (Japan). Dept. of Engineering Mechanics and Energy

    2008-07-01

    The feasibility of an ultra-long distance high voltage DC (HVDC) transmission line from the Tugursk region in Russia to Kanto, Japan was investigated. Power flow calculations and transient stability analyses were conducted to simulate the transient responses of AC voltage after a DC line or 3-phase ground fault using a static synchronous compensator (STATCOM). A simplified electric power network was used to demonstrate the technology. The Tugursk system consisted of a synchronous 5.0 GW generator; a transformer; and an AC-DC converter. The Kanto system consisted of a DC-AC inverter; a STATCOM; AC parallel transmission lines; a 57 GW synchronous generator; a transformer; and a load. The study showed that the STATCOM technology maintained a high AC voltage while sending 5.0 GW of DC power. Results also suggested that the STATCOM is best connected with an inverter due to its ability to compensate more reactive power. The effects of the STATCOM on AC and DC voltage in the case of DC fault lines were minimal. The STATCOM was also able to control the overvoltage of ultra-long distance HVDC transmission lines when 3-phase ground faults occurred. 8 refs., 2 tabs., 14 figs.

  9. Feasibility study of medical isotope production at Sandia National Laboratories

    International Nuclear Information System (INIS)

    Massey, C.D.; Miller, D.L.; Carson, S.D.

    1995-12-01

    In late 1994, Sandia National Laboratories in Albuquerque, New Mexico, (SNL/NM), was instructed by the Department of Energy (DOE) Isotope Production and Distribution Program (IPDP) to examine the feasibility of producing medically useful radioisotopes using the Annular Core Research Reactor (ACRR) and the Hot Cell Facility (HCF). Los Alamos National Laboratory (LANL) would be expected to supply the targets to be irradiated in the ACRR. The intent of DOE would be to provide a capability to satisfy the North American health care system demand for 99 Mo, the parent of 99m Tc, in the event of an interruption in the current Canadian supply. 99m Tc is used in 70 to 80% of all nuclear medicine procedures in the US. The goal of the SNL/NM study effort is to determine the physical plant capability, infrastructure, and staffing necessary to meet the North American need for 99 Mo and to identify and examine all issues with potential for environmental impact

  10. The Mercury Project a feasibility study for Internet robots

    CERN Document Server

    Goldberg, K; Sutter, C; Wiegley, J

    2000-01-01

    Initiated at CERN in 1992, the World Wide Web provides a standard graphical interface to the Internet, and the number of users worldwide has grown exponentially in the last few years. In the Spring of 1994, we conjectured that it might be possible to offer public access to a teleoperated robot via the WWW. As a feasibility study in 1994, we built a system that allows a robot manipulator to be teleoperated via the Internet. Although the field of teleoperation dates back over 50 years, HTTP provides a low-cost and widely available interface that can make teleoperated resources accessible to a broad range of users. The Mercury Project consisted of an industrial robot arm fitted with a CCD camera and a pneumatic system. We placed a sandbox filled with buried artifacts in the robot workspace. Novice users remotely moved the camera to view desired locations and directed short bursts of compressed air into the sand to view the newly cleared regions. To our knowledge, the Mercury Project was the first Internet robot....

  11. Fort Yukon, Chalkyitsik, & Venetie Biomass Boiler Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Greg Koontz, ME William A. Wall, PhD

    2009-03-31

    The Council of Athabascan Tribal Governments (CATG) is a consortium of ten Gwich'in and Koyukon Athabascan tribes settled in 10 remote villages and are linked by the Yukon River System. The CATG mission is to maintain the Yukon Flats region as Indian Country by asserting traditional rights and taking responsibility for developing tribal technical capacity to manage the land and resources. It is the intent of CATG to explore and develop all opportunities for a renewable and self-sufficient energy program for each of the villages. CATG envisions utilization of forest resources both for construction and energy as one of the best long-term strategies for integrating the economic goals for the region as well as supporting the cultural and social issues. The intent for this feasibility project is to focus specifically on biomass utilization for heat, first, and for future electrical generation within the region, second. An initial determination has already been made regarding the importance of wood energy as a primary source of renewable energy to displace diesel fuel in the Yukon Flats region. A desktop study of other potential renewable resources was conducted in 2006.

  12. Oral home telecare for adults with tetraplegia: a feasibility study.

    Science.gov (United States)

    Yuen, Hon K; Pope, Charlene

    2009-01-01

    This pilot study investigated the feasibility of delivering an individualized program of oral home telecare training using PC-based, real-time interactive videoconferencing via the Internet to meet the unique challenges of dental care for people with tetraplegia. A home-based videoconferencing method was tested with two adults with tetraplegia and an occupational therapist (rehabilitation specialist). As part of the proposed rehabilitation training to improve independence in performing oral hygiene, adaptive devices (a rechargeable oscillating-rotating power toothbrush and a cordless oral irrigator) were introduced to facilitate oral care performance with interactive, Web-based instruction. Training was conducted once a week for 4 weeks. The oral home telecare experience was evaluated using a questionnaire and in-depth interviews after the training. Both subjects were satisfied with the oral home telecare services and were enthusiastic about using the services without major difficulty after having previously experienced barriers to dental care. In addition to their positive perceptions about videoconferencing, the subjects suggested adaptations and identified unexpected potential uses for interactive videoconferencing. The use of interactive videoconferencing as a mode of oral hygiene training may lead to a change in oral hygiene service delivery methods, improving accessibility to geographically dispersed populations with tetraplegia. Oral home telecare offers strategies to decrease physical barriers and communication difficulties that correspond to recommendations to improve the quality of dental health services for people with tetraplegia.

  13. Feasibility study of medical isotope production at Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Massey, C.D.; Miller, D.L.; Carson, S.D. [Sandia National Labs., Albuquerque, NM (United States). Environmental Regulatory Assessment Dept.] [and others

    1995-12-01

    In late 1994, Sandia National Laboratories in Albuquerque, New Mexico, (SNL/NM), was instructed by the Department of Energy (DOE) Isotope Production and Distribution Program (IPDP) to examine the feasibility of producing medically useful radioisotopes using the Annular Core Research Reactor (ACRR) and the Hot Cell Facility (HCF). Los Alamos National Laboratory (LANL) would be expected to supply the targets to be irradiated in the ACRR. The intent of DOE would be to provide a capability to satisfy the North American health care system demand for {sup 99}Mo, the parent of {sup 99m}Tc, in the event of an interruption in the current Canadian supply. {sup 99m}Tc is used in 70 to 80% of all nuclear medicine procedures in the US. The goal of the SNL/NM study effort is to determine the physical plant capability, infrastructure, and staffing necessary to meet the North American need for {sup 99}Mo and to identify and examine all issues with potential for environmental impact.

  14. Feasibility study for the spallation neutron source (SNQ). Pt. 1

    International Nuclear Information System (INIS)

    Bauer, G.S.; Sebening, H.; Vetter, J.E.; Willax, H.

    1981-06-01

    A concept for a new neutron source for fundamental research has been developed and is described in this report. The spallation neutron source SNQ is characterized in its first stage by a time average thermal neutron flux of 7 x 10 14 cm -2 s -1 and a peak flux of 1.3 x 10 16 cm -2 s -1 at 100 Hz repetition rate. The scientific case is presented with particular emphasis on solid state and nuclear physics. In these research domains, unique conditions are given for experimental use. The proposed machine consists in its basic stage of a 1.1 GeV, 5 mA time average, 100 mA peak current proton linear accelerator, a rotating lead target, and H 2 O and D 2 O moderators. Additional beam channels are provided for experiments with protons at 350 MeV and at the final energy. Construction of the SNQ is considered feasible within eight years at a cost of 680 million DM. As future options, use of uranium as a target material, increase of the accelerator beam power by a factor of 2, addition of a pulse compressor and a second target station for pulsed neutron and neutrino research are described. As a back-up solution to the rotating target, a liquid metal target was studied. (orig.) [de

  15. Feasibility study of patient motion monitoring using tactile array sensor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Tae Ho; Kang, Seong Hee; Kim, Dong Su; Cho, Min Seok; Kim, Kyeong Hyeon; Suh, Tae Suk [Dept. of Biomedical Engineering, Research Institute of Biomedical Engineering, the Catholic University of Korea, Seoul (Korea, Republic of); Kim, Si Yong [Dept. of Radiation Oncology, Virginia Commonwealth University, Richmond (United States)

    2014-11-15

    The aim of this study is to evaluate patient pretreatment set-up error and intra-fraction motion using the tactile array sensors (Pressure Profile Systems Inc, Los Angeles, CA) which could measure distributed pressure profiles along the contacting surface and to check a feasibility of the sensor (tactile array sensor) in the patient motion monitoring. Laser alignment and optical camera based monitoring system are very useful for reduce patient set-up error but these systems could not monitor the blind area like patient's back position. Actually after patient alignment using laser or optical monitoring system, it was assumed that there is no error in the patient's back position (pressure profile distribution). But if an error occurs in the patient's back position, it will affect the radiation therapy accuracy. In spite of optical motion monitoring or using the immobilization tool, distributed pressure profiles of patient's back position was changed during inter and intra-fraction. For more accurate patient set-up, blind area (patient's back) monitoring was necessary. We expect that the proposed method will be very useful for make up for the weakness of optical monitoring method.

  16. Endoscopic colostomy with percutaneous colopexy: an animal feasibility study

    Directory of Open Access Journals (Sweden)

    Leonardo Alfonso Bustamante-López

    Full Text Available Background: Indications for colostomy in colorectal diseases are obstruction of the large bowel, such as in cancer, diverticular disease in the acute phase, post-radiotherapy enteritis, complex perirectal fistulas, anorectal trauma and severe anal incontinence. Some critically ill patients cannot tolerate an exploratory laparotomy, and laparoscopic assisted colostomy also requires general anesthesia. Objective: To evaluate the feasibility, safety and efficacy of performing colostomy assisted by colonoscopy and percutaneous colopexy. Materials and methods: Five pigs underwent endoscopic assisted colostomy with percutaneous colopexy. Animals were evaluated in post-operative days 1, 2, 5 and 7 for feeding acceptance and colostomy characteristics. On day 7 full colonoscopy was performed on animals followed by exploratory laparotomy. Results: Average procedure time was 27 minutes (21-54 min. Postoperative mobility and feeding of animals were immediate after anesthesia recovery. Position of the colostomy, edges color, appearance of periostomal area, as well as its function was satisfactory in four animals. Retraction of colostomy was present in one pig. The colonoscopy and laparotomy control on the seventh day were considered as normal. A bladder perforation that was successfully repaired through the colostomy incision occurred in one pig. The main limitation of this study is its experimental nature. Conclusion: Endoscopic assisted colostomy with percutaneous colopexy proves to be a safe and effective method with low morbidity for performing colostomy in experimental animals, with possible clinical application in humans.

  17. Exercise for Adolescents with Depressive Disorders: A Feasibility Study

    Directory of Open Access Journals (Sweden)

    Richard R. Dopp

    2012-01-01

    Full Text Available Objectives. Adolescence is associated with increased depressive symptoms and decreased aerobic exercise, yet the relationship between exercise and clinical depression among adolescents requires further examination. This study assessed the feasibility of a 12-week intervention designed to increase exercise for adolescents with depressive disorders: Will a teenager with depression exercise? Methods. Participants were 13 adolescents with depression reporting low levels of aerobic exercise. They completed a 12-week intervention (15 supervised exercise sessions and 21 independent sessions. Exercise was measured through the aerobic exercise Questionnaire, actigraphy, and heart-rate monitoring. Depression was measured with the Children’s Depression Rating Scale, Revised, and Quick Inventory of Depressive Symptomatology, Self-Report. Results. All participants who started the intervention completed the protocol, attending all supervised exercise sessions. Actigraphy verified 81% adherence to the protocol’s independent sessions. Analysis of secondary outcomes showed a significant increase in exercise levels and a significant decrease in depression severity. Initially, ten participants were overweight or obese, and three were healthy weight. After 12 weeks of exercise, the number of participants in the healthy-weight category doubled. Conclusions. Adolescents suffering from depression can complete a rigorous protocol requiring structured increases in aerobic exercise. Participants showed significant increases in exercise, and significant decreases in depressive symptoms.

  18. A Feasibility Study to Evaluate Wind Energy Potential on the Navajo Nation

    Energy Technology Data Exchange (ETDEWEB)

    Terry Battiest

    2012-11-30

    The project, A Feasibility Study to Evaluate Wind Energy Potential on the Navajo Nation, is funded under a solicitation issued by the U.S. Department of Energy Tribal Energy Program. Funding provided by the grant allowed the Navajo Nation to measure wind potential at two sites, one located within the boundaries of the Navajo Nation and the other off-reservation during the project period (September 5, 2005 - September 30, 2009). The recipient for the grant award is the Navajo Tribal Utility Authority (NTUA). The grant allowed the Navajo Nation and NTUA manage the wind feasibility from initial site selection through the decision-making process to commit to a site for wind generation development. The grant activities help to develop human capacity at NTUA and help NTUA to engage in renewable energy generation activities, including not only wind but also solar and biomass. The final report also includes information about development activities regarding the sited included in the grant-funded feasibility study.

  19. Models of cognitive behavior in nuclear power plant personnel. A feasibility study: main report. Volume 2

    International Nuclear Information System (INIS)

    Woods, D.D.; Roth, E.M.; Hanes, L.F.

    1986-07-01

    This report contains the results of a feasibility study to determine if the current state of models human cognitive activities can serve as the basis for improved techniques for predicting human error in nuclear power plants emergency operations. Based on the answer to this questions, two subsequent phases of research are planned. Phase II is to develop a model of cognitive activities, and Phase III is to test the model. The feasibility study included an analysis of the cognitive activities that occur in emergency operations and an assessment of the modeling concepts/tools available to capture these cognitive activities. The results indicated that a symbolic processing (or artificial intelligence) model of cognitive activities in nuclear power plants is both desirable and feasible. This cognitive model can be built upon the computational framework provided by an existing artificial intelligence system for medical problem solving called Caduceus. The resulting cognitive model will increase the capability to capture the human contribution to risk in probabilistic risk assessments studies. Volume I summarizes the major findings and conclusions of the study. Volume II provides a complete description of the methods and results, including a synthesis of the cognitive activities that occur during emergency operations, and a literature review on cognitive modeling relevant to nuclear power plants. 112 refs., 10 figs

  20. Feasibility study on the development of advanced LWR fuel technology

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Youn Ho; Sohn, D. S.; Jeong, Y. H.; Song, K. W.; Song, K. N.; Chun, T. H.; Bang, J. G.; Bae, K. K.; Kim, D. H. and others

    1997-07-01

    Worldwide R and D trends related to core technology of LWR fuels and status of patents have been surveyed for the feasibility study. In addition, various fuel cycle schemes have been studied to establish the target performance parameters. For the development of cladding material, establishment of long-term research plan for alloy development and optimization of melting process and manufacturing technology were conducted. A work which could characterize the effect of sintering additives on the microstructure of UO{sub 2} pellet has been experimentally undertaken, and major sintering variables and their ranges have been found in the sintering process of UO{sub 2}-Gd{sub 2}O{sub 3} burnable absorber pellet. The analysis of state of the art technology related to flow mixing device for spacer grid and debris filtering device for bottom nozzle and the investigation of the physical phenomena related to CHF enhancement and the establishment of the data base for thermal-hydraulic performance tests has been done in this study. In addition, survey on the documents of the up-to-date PWR fuel assemblies developed by foreign vendors have been carried out to understand their R and D trends and establish the direction of R and D for these structural components. And, to set the performance target of the new fuel, to be developed, fuel burnup and economy under the extended fuel cycle length scheme were estimated. A preliminary study on the failure mechanism of CANDU fuel, key technology and advanced coating has been performed. (author). 190 refs., 31 tabs., 129 figs.

  1. A feasibility study for a one-megawatt pulsed spallation source at Los Alamos National Laboratory

    International Nuclear Information System (INIS)

    Pynn, R.

    1994-01-01

    Over the past two decades, high-intensity proton accelerators have been designed and developed to support nuclear physics research and defense applications. This technology has now matured to the point where it can support simultaneous and cost-effective exploitation of a number of important areas of both basic and applied science. Examples include neutron scattering, the production of radioisotopes, tests of technologies to transmute nuclear waste, radiation damage studies, nuclear physics, and muon spin research. As part of a larger program involving these and other areas, a team at Los Alamos National Laboratory has undertaken a feasibility study for a 1-MW pulsed spallation neutron source (PSS) based on the use of an 800-MeV proton linac and an accumulator ring. In January 1994, the feasibility study was reviewed by a large, international group of experts in the design of accelerators and neutron spallation targets. This group confirmed the viability of the proposed neutron source. In this paper, I describe the approach Los Alamos has taken to the feasibility study, which has involved a synergistic application of the Laboratory's expertise in nuclear science and technology, computation, and particle-beam technologies. Several examples of problems resolved by the study are described, including chopping of low-energy proton beam, interactions between H - particles and the stripper foil used to produce protons for injection into an accumulator ring, and the inclusion of engineering realities into the design of a neutron production target. These examples are chosen to illustrate the breadth of the expertise that has been brought to bear on the feasibility study and to demonstrate that there are real R ampersand D issues that need to be resolved before a next-generation spoliation source can be built

  2. Feasibility studies for high pressure neutron powder diffraction experiments

    International Nuclear Information System (INIS)

    Von Dreele, R.B.; Parise, J.

    1990-01-01

    We recently performed two neutron powder diffraction experiments on very small samples on the High Intensity Powder Diffractometer (HIPD). These were done to determine the feasibility of performing in situ high pressure/high temperature neutron diffraction experiments on HIPD at pressures which would exceed the previous limit of ∼50 kbar achievable in a neutron diffraction experiment. The first experiment consisted of examining the product from a high pressure preparation done at Stony Brook. The sample, which had been prepared at 65 kbar and 1000 degree C, consisted of a small platinum capsule filled with CaGeO 3 perovskite. The weights of the capsule included 225 mg of platinum and 49 mg of the germanate. A diffraction experiment taking ∼8.6 hrs at a LANSCE proton beam current of ∼53 μA gave peaks of good intensity from both Pt and CaGeO 3 ; we could begin to see them after only 20 min of beam time. The second experiment was to test the possibility of diffraction from a high pressure apparatus. We placed in the HIPD sample position the central assembly from a 100 kbar octahedral press. Four tungsten carbide anvils and a copper block previously pressed to 65 kbar were held in an aluminum frame. The sample consisted of a small bit of nickel foil (175 mg) placed in a 3 mm hole in the copper block. The active sample volume is defined by the gap between the anvils and the length of the sample. A small portion of the copper block is also seen in this arrangement. This is viewed at 90 degree 2Θ through a similar gap between the anvils by 4 1/2 in. x 12 in. 3 He counter tubes. This arrangement simulates the operating conditions of a high pressure run at 100 kbar and takes advantage of the fixed instrument geometry possible in time-of-flight neutron diffraction experiments

  3. Feasibility study for a computerized emergency preparedness simulation facility

    International Nuclear Information System (INIS)

    Gerhardstein, L.H.; Schroeder, J.O.; Sandusky, W.F.

    1979-11-01

    This report details the feasibility of a computerized Emergency Preparedness Simulation Facility (EPSF) for use by the Nuclear Regulatory Commission (NRC). The proposed facility would be designed to provide the NRC and other federal, state, and local government agencies with a capability to formulate, test, and evaluate the Emergency Preparedness Plans (EPP) which local and state agencies have/will establish for use during nuclear emergencies. In cases of any state emergency (including a nuclear emergency), high level state government officials will direct emergency procedures and insure that state and local emergency teams carry out tasks which have been established in their EPP. When an emergency exists, rapid mobilization of emergency teams, efficient communication, and effective coordination of individual team efforts is essential to safety, preservation of property, and overall public welfare. Current EPP evaluation procedures are qualitative in nature and while they do compare emergency drill performance with the EPP, the nature of the drills often does not provide enough realism to actual emergency conditions. Automated simulation of real emergency conditions using modern computer equipment and programming techniques will provide the NRC emergency evaluation teams a simulated environment which closely approximates conditions which would actually exist during a real emergency. In addition, the computer can be used to collect and log performance and event data which will aid the evaluation team in making assessments of the state or local area's EPP and their Emergency Preparedness Teams performance during emergency drills. Overall, a computerized EPSF can improve drill testing and evaluation efficiency, provide approximate emergency condition realism, and improve public awareness of local emergency procedures

  4. Yoga for Health-Related Quality of Life in Adult Cancer: A Randomized Controlled Feasibility Study

    Directory of Open Access Journals (Sweden)

    Marcy McCall

    2015-01-01

    Full Text Available An increase in patient-led uptake of complementary therapies in adult cancer has led to a need for more rigorous study of such interventions and their outcomes. This study therefore aimed to evaluate the feasibility and acceptability of a yoga intervention in men and women receiving conventional treatment for a cancer diagnosis. Prospective, mixed methods feasibility trial allocated participants to receive one of three yoga interventions over a four-week study period. Data collection was completed through online survey of QOL-CA/CS and customized surveys. Fifteen participants were included (11 female undergoing treatment for breast, prostate, colorectal, brain, and blood and lung cancer. Two participants dropped out and complete qualitative and quantitative data sets were collected from 12 participants and four yoga instructors. Other outcome measures included implementation costs patient-reported preferences for yoga intervention and changes in QOL-CA/CS. Three types of yoga intervention were safely administered in adult cancer. Mixed methods, cost-efficiency, QOL-CA/CS, and evidence-based design of yoga intervention have been used to establish feasibility and patient-preferences for yoga delivery in adult caner. Results suggest that, with some methodological improvements, a large-scale randomized controlled trial is warranted to test the efficacy of yoga for male and female cancer patients. This trial is registered with Clinicaltrials.gov NCT02309112.

  5. Pueblo of Jemez Geothermal Feasibility Study Fianl Report

    Energy Technology Data Exchange (ETDEWEB)

    S.A. Kelley; N. Rogers; S. Sandberg; J. Witcher; J. Whittier

    2005-03-31

    This project assessed the feasibility of developing geothermal energy on the Pueblo of Jemez, with particular attention to the Red Rocks area. Geologic mapping of the Red Rocks area was done at a scale of 1:6000 and geophysical surveys identified a potential drilling target at a depth of 420 feet. The most feasible business identified to use geothermal energy on the reservation was a greenhouse growing culinary and medicinal herbs. Space heating and a spa were identified as two other likely uses of geothermal energy at Jemez Pueblo. Further geophysical surveys are needed to identify the depth to the Madera Limestone, the most likely host for a major geothermal reservoir.

  6. The PHARMS (Patient Held Active Record of Medication Status) feasibility study: a research proposal.

    LENUS (Irish Health Repository)

    Walsh, Elaine

    2018-01-08

    Medication errors are a major source of preventable morbidity, mortality and cost and many occur at the times of hospital admission and discharge. Novel interventions (such as new methods of recording medication information and conducting medication reconciliation) are required to facilitate accurate transfer of medication information. With existing evidence supporting the use of information technology and the patient representing the one constant in the care process, an electronic patient held medication record may provide a solution. This study will assess the feasibility of introducing a patient held electronic medication record in primary and secondary care using the Consolidated Framework for Implementation Research (CFIR).This feasibility study is a mixed method study of community dwelling older adult patients admitted to an urban secondary care facility comprising a non-randomised intervention and qualitative interviews with key stakeholders. Outcomes of interest include clinical outcomes and process evaluation.This study will yield insights pertaining to feasibility, acceptability and participation for a more definitive evaluation of the intervention. The study also has the potential to contribute to knowledge of implementation of technology in a healthcare context and to the broader area of implementation science.

  7. 'Birth to Ten' - pilot studies to test the feasibility of a birth cohort study ...

    African Journals Online (AJOL)

    Birth to Ten' is a birth cohort study currently being conducted in the Johannesburg-Soweto area. This paper describes the various pilot studies that were undertaken to investigate the feasibility of a cohort study in an urban area. These studies were designed to determine the monthly birth rate, the timing, frequency and ...

  8. Study of Optimal Perimetric Testing in Children (OPTIC: Feasibility, Reliability and Repeatability of Perimetry in Children.

    Directory of Open Access Journals (Sweden)

    Dipesh E Patel

    Full Text Available To investigate feasibility, reliability and repeatability of perimetry in children.A prospective, observational study recruiting 154 children aged 5-15 years, without an ophthalmic condition that affects the visual field (controls, identified consecutively between May 2012 and November 2013 from hospital eye clinics. Perimetry was undertaken in a single sitting, with standardised protocols, in a randomised order using the Humphrey static (SITA 24-2 FAST, Goldmann and Octopus kinetic perimeters. Data collected included test duration, subjective experience and test quality (incorporating examiner ratings on comprehension of instructions, fatigue, response to visual and auditory stimuli, concentration and co-operation to assess feasibility and reliability. Testing was repeated within 6 months to assess repeatability.Overall feasibility was very high (Goldmann=96.1%, Octopus=89% and Humphrey=100% completed the tests. Examiner rated reliability was 'good' in 125 (81.2% children for Goldmann, 100 (64.9% for Octopus and 98 (63.6% for Humphrey perimetry. Goldmann perimetry was the most reliable method in children under 9 years of age. Reliability improved with increasing age (multinomial logistic regression (Goldmann, Octopus and Humphrey, p<0.001. No significant differences were found for any of the three test strategies when examining initial and follow-up data outputs (Bland-Altman plots, n=43, suggesting good test repeatability, although the sample size may preclude detection of a small learning effect.Feasibility and reliability of formal perimetry in children improves with age. By the age of 9 years, all the strategies used here were highly feasible and reliable. Clinical assessment of the visual field is achievable in children as young as 5 years, and should be considered where visual field loss is suspected. Since Goldmann perimetry is the most effective strategy in children aged 5-8 years and this perimeter is no longer available, further

  9. Feasibility study report for the 200-BP-1 operable unit

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    This feasibility study examines a range of alternatives and provides recommendations for selecting a preferred alternative for remediating contamination at the 200-BP-1 operable unit. The 200-BP-1 operable unit is located in the center of the Hanford Site along the northern boundary of the 200 East Area. The 241-BY Tank Farm is located immediately to the south of the operable unit. 200-BP-1 is a source operable unit with contaminated soils associated primarily with nine inactive cribs (known as the 216-B cribs). These cribs were used for disposal of low-level radioactive liquid waste from U Plant uranium recovery operations, and waste storage tank condensate from the adjacent 241-BY Tank Farm. The cribs used for disposal of U Plant waste were in operation from 1955--1965, and the cribs used for disposal of tank condensate were in operation from 1965--1975. In addition to the cribs, four unplanned releases of radioactive materials have occurred within the operable unit. Contaminated surface soils associated with the unplanned releases have been consolidated over the cribs and covered with clean soil to reduce contaminant migration and exposure. Discharge of wastes to the cribs has resulted in soil and groundwater contamination. The groundwater is being addressed as part of the 200 East Aggregate Area, groundwater operable unit. Contaminated soils at the site can be categorized by the types of contaminants, their distribution in the soil column, and the risk posed by the various potential exposure pathways. Below the clean soil cover, the near surface soils contain low-levels of contamination with cesium-137, radium-226, strontium-90, thorium-228, and uranium. The lifetime incremental cancer risk associated with these soils if they were exposed at the surface is 9{times}10{sup {minus}5}.

  10. Feasibility study report for the 200-BP-1 operable unit

    International Nuclear Information System (INIS)

    1993-06-01

    This feasibility study examines a range of alternatives and provides recommendations for selecting a preferred alternative for remediating contamination at the 200-BP-1 operable unit. The 200-BP-1 operable unit is located in the center of the Hanford Site along the northern boundary of the 200 East Area. The 241-BY Tank Farm is located immediately to the south of the operable unit. 200-BP-1 is a source operable unit with contaminated soils associated primarily with nine inactive cribs (known as the 216-B cribs). These cribs were used for disposal of low-level radioactive liquid waste from U Plant uranium recovery operations, and waste storage tank condensate from the adjacent 241-BY Tank Farm. The cribs used for disposal of U Plant waste were in operation from 1955--1965, and the cribs used for disposal of tank condensate were in operation from 1965--1975. In addition to the cribs, four unplanned releases of radioactive materials have occurred within the operable unit. Contaminated surface soils associated with the unplanned releases have been consolidated over the cribs and covered with clean soil to reduce contaminant migration and exposure. Discharge of wastes to the cribs has resulted in soil and groundwater contamination. The groundwater is being addressed as part of the 200 East Aggregate Area, groundwater operable unit. Contaminated soils at the site can be categorized by the types of contaminants, their distribution in the soil column, and the risk posed by the various potential exposure pathways. Below the clean soil cover, the near surface soils contain low-levels of contamination with cesium-137, radium-226, strontium-90, thorium-228, and uranium. The lifetime incremental cancer risk associated with these soils if they were exposed at the surface is 9x10 -5

  11. A feasibility study of adaptive plasma-assisted incineration

    Science.gov (United States)

    Filion, Julie

    Rising awareness in the need for environmental protection has brought into question the adequacy of conventional hazardous waste treatment operations. Regulatory standards are increasingly strict, and there is growing concern over the safety of incineration facilities. This research project examines the technoeconomic potential of thermal plasma technology in this context. Adaptive Plasma-Assisted Incineration (APAI) is a novel concept for secondary gas treatment in hazardous waste incineration. As an energy source for waste destruction, a thermal plasma can provide conditions far higher in temperature and in reactivity than those obtained using a combustion flame. Thus, the plasma is more effective at destroying hazardous materials, albeit at a higher cost. APAI features a thermal plasma afterburner with continual on-line optical monitoring of the gas product and feedback optimization of the plasma conditions. This approach allows complete destruction of persistent organic compounds and cost-effective response to feed load variations. The process supplements conventional incineration techniques with the effectiveness and flexibility of thermal plasma treatment. The main objectives are to reduce the risk of harmful emissions during hazardous waste incineration and to facilitate compliance with new environmental regulations. In this project, the technical feasibility of APAI was demonstrated experimentally using a laboratory-scale plasma afterburner model. The work focused on the development of a spectroscopic monitoring procedure and on the application of optimization techniques for cost-effective operation of the model system. The techno-economic potential and limitations of APAI were addressed in a conceptual study. Preliminary designs and cost estimates were developed for specific applications. The costs of plasma-assisted and conventional methods were compared for contaminated soil remediation (by incineration and desorption) and for organic liquid waste

  12. Automated estimation of hip prosthesis migration: a feasibility study

    Science.gov (United States)

    Vandemeulebroucke, Jef; Deklerck, Rudi; Temmermans, Frederik; Van Gompel, Gert; Buls, Nico; Scheerlinck, Thierry; de Mey, Johan

    2013-09-01

    A common complication associated with hip arthoplasty is prosthesis migration, and for most cemented components a migration greater than 0.85 mm within the first six months after surgery, are an indicator for prosthesis failure. Currently, prosthesis migration is evaluated using X-ray images, which can only reliably estimate migrations larger than 5 mm. We propose an automated method for estimating prosthesis migration more accurately, using CT images and image registration techniques. We report on the results obtained using an experimental set-up, in which a metal prosthesis can be translated and rotated with respect to a cadaver femur, over distances and angles applied using a combination of positioning stages. Images are first preprocessed to reduce artefacts. Bone and prosthesis are extracted using consecutive thresholding and morphological operations. Two registrations are performed, one aligning the bones and the other aligning the prostheses. The migration is estimated as the difference between the found transformations. We use a robust, multi-resolution, stochastic optimization approach, and compare the mean squared intensity differences (MS) to mutual information (MI). 30 high-resolution helical CT scans were acquired for prosthesis translations ranging from 0.05 mm to 4 mm, and rotations ranging from 0.3° to 3° . For the translations, the mean 3D registration error was found to be 0.22 mm for MS, and 0.15 mm for MI. For the rotations, the standard deviation of the estimation error was 0.18° for MS, and 0.08° for MI. The results show that the proposed approach is feasible and that clinically acceptable accuracies can be obtained. Clinical validation studies on patient images will now be undertaken.

  13. Feasibility study report for the 200-BP-1 operable unit

    International Nuclear Information System (INIS)

    1994-01-01

    This feasibility study (FS) examines a range of alternatives and provides recommendations for selecting a preferred altemative for remediating contamination at the 200-BP-1 operable unit. The 200-BP-1 operable unit is located in the center of the Hanford Site along the northern boundary of the 200 East Area. The 241-BY Tank Farm is located immediately to the south of the operable unit. 200-BP-1 is a source operable unit with contaminated soils associated primarily with nine inactive cribs (known as the 216-B cribs). These cribs were used for disposal of low-level radioactive liquid waste from U Plant uranium recovery operations, and waste storage tank condensate from the adjacent 241-BY Tank Farm. The cribs used for disposal of U Plant waste were in operation from 1955--1965, and the cribs used for disposal of tank condensate were in operation from 1965-1975. In addition to the cribs, four unplanned releases of radioactive materials have occurred within the operable unit. Contaminated surface soils associated with the unplanned releases have been consolidated over the cribs and covered with clean soil to reduce contaminant migration and exposure. Discharge of wastes to the cribs has resulted in soil and groundwater contamination. The groundwater is being addressed as part of the 200 East Aggregate Area groundwater operable unit. Contaminated soils at the site can be categorized by the types of contaminants, their distribution in the soil column, and the risk posed by the various potential exposure pathways. Below the clean soil cover, the near surface soils contain low-:levels of contamination with cesium-137, radium-226, strontium-90, thorium-228 and uranium. The lifetime incremental cancer risk associated with these soils if they were exposed at the surface is 9 x 10 5

  14. Feasibility study for the Tonawanda site, Tonawanda, New York

    International Nuclear Information System (INIS)

    1993-11-01

    From 1942 to 1946, portions of the Linde property and buildings in the Town of Tonawanda, New York, were used for separation of uranium ores. These processing activities, conducted under a Manhattan Engineer District (MED) contract, resulted in radioactive contamination of portions of the property and buildings. Subsequent disposal and relocation of processing wastes from the Linde property resulted in radioactive contamination of three nearby properties in the Town of Tonawanda: the Ashland 1 property, the Seaway property, and the Ashland 2 property. Together these four properties are referred to as the Tonawanda site. DOE is conducting a remedial investigation/feasibility study/proposed plan-environmental impact statement (RI/FS/PP-EIS) process for the Tonawanda site in accordance with procedures developed under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and National Environmental Policy Act (NEPA). The RI report, a baseline risk assessment (BRA), and the FS are the primary evaluation documents prepared by DOE to summarize the findings of the integrated RI/FS/PP-EIS process. The RI report summarizes the findings of activities conducted at the Tonawanda site to determine the nature, extent, and potential for migration of the radioactive and associated chemical contamination resulting from MED operations. The BRA presents the findings of an assessment to determine the human health and ecological risks posed by the presence of radioactive and associated chemical contamination. The FS report identifies, develops, and evaluates remedial action alternatives for the site based on the nature and extent of contamination documented in the RI report. The FS report also evaluates the potential environmental consequences of the various remedial action alternatives identified

  15. Final Report - Wind and Hydro Energy Feasibility Study - June 2011

    Energy Technology Data Exchange (ETDEWEB)

    Jim Zoellick; Richard Engel; Rubin Garcia; Colin Sheppard

    2011-06-17

    This feasibility examined two of the Yurok Tribe's most promising renewable energy resources, wind and hydro, to provide the Tribe detailed, site specific information that will result in a comprehensive business plan sufficient to implement a favorable renewable energy project.

  16. Adaptive radiotherapy for invasive bladder cancer: a feasibility study

    NARCIS (Netherlands)

    Pos, Floris J.; Hulshof, Maarten; Lebesque, Joos; Lotz, Heidi; van Tienhoven, Geertjan; Moonen, Luc; Remeijer, Peter

    2006-01-01

    To evaluate the feasibility of adaptive radiotherapy (ART) in combination with a partial bladder irradiation. Twenty-one patients with solitary T1-T4 N0M0 bladder cancer were treated to the bladder tumor + 2 cm margin planning target volume (PTV(CONV)). During the first treatment week, five daily

  17. 78 FR 57624 - Availability of a Draft Integrated Feasibility Report (Feasibility Study/Environmental Impact...

    Science.gov (United States)

    2013-09-19

    ... opportunities for connectivity to ecological zones such as the Santa Monica Mountains, Verdugo Hills, Elysian Hills, and San Gabriel Mountains. Restoration also includes the reintroduction of ecological and... concerning the Draft IFR may be directed to: Josephine R. Axt, Ph.D.; Chief, Planning Division; U.S. Army...

  18. Detroit Lakes energy systems study: Phase I feasibility. Final report, February 1, 1978--July 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-07-31

    The objective of the Detroit Lakes Energy Systems Study is to determine the economic feasibility of alternative renewable energy system configurations in the northern latitudes. A forecast through both 1990 and the year 2000 is made of the demand for electrical energy in the Detroit Lakes area. An assessment of renewable energy resources including biomass, wind, and insolation is provided. A detailed analysis is made of system costs including biomass, wind, solar thermal, solar photovoltaic, selected hybrids, and conventional fuel systems. Lessons learned and recommendations for prototype fabrication are highlighted. (MHR)

  19. Studying Irony Detection Beyond Ironic Criticism: Let's Include Ironic Praise

    Directory of Open Access Journals (Sweden)

    Richard Bruntsch

    2017-04-01

    criticism. Generating unique variance in irony detection, ironic praise can be postulated as worthwhile to include in future studies—especially when studying the role of mental ability, personality, and humor in irony detection.

  20. Feasibility study of a railgun as a driver for impact fusion: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Thio. Y.C.

    1986-06-01

    The feasibility of a railgun as a driver for impact fusion is studied through a series of theoretical and experimental investigations. The results of both the theoretical and experimental investigations presented here have helped to identify the potential problems of the railgun launcher to attain velocity in excess of 100 km/s. These include ablation, viscous drag, and secondary arc formation due to either armature dispersion (instability) or restrike. These problems are analyzed and examined experimentally. The behavior of the conventional open-plasma-armature driven railguns have been shown to be quite complex and not easily controllable in the domain of ultrahigh velocity (>6 km/s). Methods to overcome these problems are proposed, analyzed in regards to their technological feasibility, and tested experimentally wherever possible. Techniques for reducing radiative ablation, the concept of a mechanically controlled plasma armature, and the concept of achieving super high augmentation by the technique of trans-augmentation are presented.

  1. Feasibility study of a railgun as a driver for impact fusion: Final report

    International Nuclear Information System (INIS)

    Thio, Y.C.

    1986-06-01

    The feasibility of a railgun as a driver for impact fusion is studied through a series of theoretical and experimental investigations. The results of both the theoretical and experimental investigations presented here have helped to identify the potential problems of the railgun launcher to attain velocity in excess of 100 km/s. These include ablation, viscous drag, and secondary arc formation due to either armature dispersion (instability) or restrike. These problems are analyzed and examined experimentally. The behavior of the conventional open-plasma-armature driven railguns have been shown to be quite complex and not easily controllable in the domain of ultrahigh velocity (>6 km/s). Methods to overcome these problems are proposed, analyzed in regards to their technological feasibility, and tested experimentally wherever possible. Techniques for reducing radiative ablation, the concept of a mechanically controlled plasma armature, and the concept of achieving super high augmentation by the technique of trans-augmentation are presented

  2. Amplified hearing device use in acute care settings for patients with hearing loss: A feasibility study.

    Science.gov (United States)

    Kimball, Amber R; Roscigno, Cecelia I; Jenerette, Coretta M; Hughart, Kimberly M; Jenkins, Wendy W; Hsu, Wesley

    2017-11-10

    The objective of this study was to assess the feasibility of using amplified hearing devices (AHD) in acute care settings for patients with hearing loss. Secondary objectives include patient and nurse satisfaction, and nursing perceived productivity. Twenty-five adult hard of hearing patients and 15 nurses were evaluated. Patients with a perceived hearing handicap were identified through the Hearing Handicap for the Elderly Screening Version. Patient and staff nurse surveys were used to assess for satisfaction with using the AHD. Nurses were surveyed to evaluate whether they felt the AHD made patient communication more efficient and effective. Twenty-four patients expressed satisfaction with the AHD and would use it in future hospitalizations. Nurses also reported satisfaction, perceived improvement of patient communication and decreased time spent communicating with patients. Results demonstrate the feasibility of using an AHD in acute care inpatient settings where elderly hard of hearing patients are common. Copyright © 2017 Elsevier Inc. All rights reserved.

  3. Body weight-supported treadmill training for patients with hip fracture: a feasibility study.

    Science.gov (United States)

    Giangregorio, Lora M; Thabane, Lehana; Debeer, Justin; Farrauto, Leonardo; McCartney, Neil; Adachi, Jonathan D; Papaioannou, Alexandra

    2009-12-01

    Giangregorio LM, Thabane L, deBeer J, Farrauto L, McCartney N, Adachi JD, Papaioannou A. Body weight-supported treadmill training for patients with hip fracture: a feasibility study. To determine the feasibility of body weight-supported treadmill training (BWSTT) as a strategy for improving independent ambulation among patients who had sustained a hip fracture. Nonrandomized controlled trial. Inpatient rehabilitation. Patients with a stable hip fracture and at least 50% weight-bearing. BWSTT in lieu of standard walking exercises throughout stay in rehabilitation. Feasibility outcomes included the number of patients agreeing to participate in treadmill walking, the number who returned for follow-up assessments, compliance, and the number of adverse events. Secondary outcomes included the Lower Extremity Functional Scale, the Timed Up & Go test, a 2-minute walk test, and the Falls Self-Efficacy Scale. Univariate regression was used to assess the group effect on score changes from baseline to discharge and from baseline to follow-up. Among 41 potentially eligible patients, 21 (51%) agreed to participate and 14 returned for follow-up assessments. The recruitment goal of 12 patients agreeing to BWSTT was achieved; however, retention by 3-month follow-up was 67%. The average compliance was 3 sessions a week; however, several patients were below average. No adverse events of BWSTT were reported. There were no significant differences between groups with respect to secondary outcomes. BWSTT may be a feasible method for retraining gait among patients with hip fracture. However, future studies evaluating its efficacy need rigorous methods for ensuring compliance and retention.

  4. Body Weight–Supported Treadmill Training for Patients With Hip Fracture: A Feasibility Study

    Science.gov (United States)

    Giangregorio, Lora M.; Thabane, Lehana; deBeer, Justin; Farrauto, Leonardo; McCartney, Neil; Adachi, Jonathan D.; Papaioannou, Alexandra

    2016-01-01

    Objective To determine the feasibility of body weight–supported treadmill training (BWSTT) as a strategy for improving independent ambulation among patients who had sustained a hip fracture. Design Nonrandomized controlled trial. Setting Inpatient rehabilitation. Participants Patients with a stable hip fracture and at least 50% weight-bearing. Intervention BWSTT in lieu of standard walking exercises throughout stay in rehabilitation. Main Outcomes Measures Feasibility outcomes included the number of patients agreeing to participate in treadmill walking, the number who returned for follow-up assessments, compliance, and the number of adverse events. Secondary outcomes included the Lower Extremity Functional Scale, the Timed Up & Go test, a 2-minute walk test, and the Falls Self-Efficacy Scale. Univariate regression was used to assess the group effect on score changes from baseline to discharge and from baseline to follow-up. Results Among 41 potentially eligible patients, 21 (51%) agreed to participate and 14 returned for follow-up assessments. The recruitment goal of 12 patients agreeing to BWSTT was achieved; however, retention by 3-month follow-up was 67%. The average compliance was 3 sessions a week; however, several patients were below average. No adverse events of BWSTT were reported. There were no significant differences between groups with respect to secondary outcomes. Conclusions BWSTT may be a feasible method for retraining gait among patients with hip fracture. However, future studies evaluating its efficacy need rigorous methods for ensuring compliance and retention. PMID:19969179

  5. Feasibility study on the establishment of the IAEA international nuclear university

    International Nuclear Information System (INIS)

    Lee, E. J.; Kim, Y. T.; Nam, Y. M. and others

    2002-09-01

    The purpose of this project is to support 2002-2003 the IAEA project D.4.0.2, facilitating education, training and research in nuclear science and related fields, especially for a feasibility study on the establishment of the Agency sponsored International Nuclear University. Through this project, the abstract principle for a feasibility study on the establishment of the Agency sponsored International Nuclear university, which contains the new concepts and its objectives, principles to achieve the objectives, its curriculum outline and operation system, suggested project activities, was developed and submitted to the Agency. The Korean proposal were presented several times at the IAEA meetings and other international meetings related nuclear human resources development for understanding the necessity of a feasibility study on the establishment of the Agency sponsored international nuclear university with Member States. And the Korean proposal included such as the organization of a worldwide network using information and communication technology among Merber States' research institutes and training/education centers, curriculum outline and operation system of the INU will be produced. Also for further cooperation of the IAEA INU project implementation with the Agency, hosting IAEA INIS mirror site, establishment of the RCA region office, establishment of the INTEC at the Korean Atomic Energy Research Institute, and advanced curriculum of nuclear technology linked with NT, BT, ET, IT were made progress as a part of conceptualizing of the IAEA project

  6. Feasibility study and roadmap to improve residential hot water distribution systems

    Energy Technology Data Exchange (ETDEWEB)

    Lutz, James D.

    2004-03-31

    Residential building practice currently ignores the losses of energy and water caused by the poor design of hot water systems. These losses include: the waste of water while waiting for hot water to get to the point of use; the wasted heat as water cools down in the distribution system after a draw; and the energy to reheat water that was already heated once before. A feasibility study and an action plan for a proposed research project involving residential hot water distribution systems is being developed. The feasibility study will use past work to estimate of hot water and energy loses caused by current hot water distribution systems in residences. Proposed research project, or roadmap, will develop recommendations for improvements to residential hot water distribution systems. The roadmap addresses the technical obstacles and gaps in our knowledge that prevent water and energy reductions and market adoption of water- and energy-efficient technologies. The initial results of the feasibility study are presented here along with a discussion of a roadmap to improve the efficiency of residential hot water distribution systems.

  7. Cherenkov luminescence measurements with digital silicon photomultipliers: a feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Ciarrocchi, Esther; Belcari, Nicola; Guerra, Alberto Del [Department of Physics, University of Pisa, Pisa (Italy); INFN, section of Pisa, Pisa (Italy); Cherry, Simon R. [Department of Biomedical Engineering, University of California, Davis, CA (United States); Lehnert, Adrienne; Hunter, William C. J.; McDougald, Wendy; Miyaoka, Robert S.; Kinahan, Paul E. [Department of Radiology, University of Washington, Seattle, WA (United States)

    2015-11-16

    A feasibility study was done to assess the capability of digital silicon photomultipliers to measure the Cherenkov luminescence emitted by a β source. Cherenkov luminescence imaging (CLI) is possible with a charge coupled device (CCD) based technology, but a stand-alone technique for quantitative activity measurements based on Cherenkov luminescence has not yet been developed. Silicon photomultipliers (SiPMs) are photon counting devices with a fast impulse response and can potentially be used to quantify β-emitting radiotracer distributions by CLI. In this study, a Philips digital photon counting (PDPC) silicon photomultiplier detector was evaluated for measuring Cherenkov luminescence. The PDPC detector is a matrix of avalanche photodiodes, which were read one at a time in a dark count map (DCM) measurement mode (much like a CCD). This reduces the device active area but allows the information from a single avalanche photodiode to be preserved, which is not possible with analog SiPMs. An algorithm to reject the noisiest photodiodes and to correct the measured count rate for the dark current was developed. The results show that, in DCM mode and at (10–13) °C, the PDPC has a dynamic response to different levels of Cherenkov luminescence emitted by a β source and transmitted through an opaque medium. This suggests the potential for this approach to provide quantitative activity measurements. Interestingly, the potential use of the PDPC in DCM mode for direct imaging of Cherenkov luminescence, as a opposed to a scalar measurement device, was also apparent. We showed that a PDPC tile in DCM mode is able to detect and image a β source through its Cherenkov radiation emission. The detector’s dynamic response to different levels of radiation suggests its potential quantitative capabilities, and the DCM mode allows imaging with a better spatial resolution than the conventional event-triggered mode. Finally, the same acquisition procedure and data processing could

  8. FEASIBILITY STUDY OF PRESSURE PULSING PIPELINE UNPLUGGING TECHNOLOGIES FOR HANFORD

    Energy Technology Data Exchange (ETDEWEB)

    Servin, M. A. [Washington River Protection Solutions, LLC, Richland, WA (United States); Garfield, J. S. [AEM Consulting, LLC (United States); Golcar, G. R. [AEM Consulting, LLC (United States)

    2012-12-20

    The ability to unplug key waste transfer routes is generally essential for successful tank farms operations. All transfer lines run the risk of plugging but the cross site transfer line poses increased risk due to its longer length. The loss of a transfer route needed to support the waste feed delivery mission impacts the cost and schedule of the Hanford clean up mission. This report addresses the engineering feasibility for two pressure pulse technologies, which are similar in concept, for pipeline unplugging.

  9. Long-range eye tracking: A feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Jayaweera, S.K.; Lu, Shin-yee

    1994-08-24

    The design considerations for a long-range Purkinje effects based video tracking system using current technology is presented. Past work, current experiments, and future directions are thoroughly discussed, with an emphasis on digital signal processing techniques and obstacles. It has been determined that while a robust, efficient, long-range, and non-invasive eye tracking system will be difficult to develop, such as a project is indeed feasible.

  10. Feasibility Study Of Pressure Pulsing Pipeline Unplugging Technologies For Hanford

    International Nuclear Information System (INIS)

    Servin, M. A.; Garfield, J. S.; Golcar, G. R.

    2012-01-01

    The ability to unplug key waste transfer routes is generally essential for successful tank farms operations. All transfer lines run the risk of plugging but the cross site transfer line poses increased risk due to its longer length. The loss of a transfer route needed to support the waste feed delivery mission impacts the cost and schedule of the Hanford clean up mission. This report addresses the engineering feasibility for two pressure pulse technologies, which are similar in concept, for pipeline unplugging

  11. Feasibility study--computerized application of the hazardous material regulations

    International Nuclear Information System (INIS)

    Ferrada, J.J.; Green, V.M.; Rawl, R.R.

    1992-09-01

    The feasibility of developing a full expert system for transportation and packaging of hazardous and radioactive materials was initiated within the framework of three subtasks: (1) analysis of commercial packages related to regulation scanning, (2) analysis of computer languages to develop the expert system, and (3) development of expert system prototypes. The strategy to develop the latter subtask was to first,develop modules to capture the knowledge of different areas of transportation and packaging and second, to analyze the feasibility of appending these different modules in one final full package. The individual modules development contemplated one prototype for transporting and packaging of radioactive material and another for transporting hazardous chemical materials. In the event that it is not feasible to link these two packages, the modules can always be used as stand-alone tools, or linked as a single package with some restrictions in their applicability. The work done during this fiscal year has focused on developing a prototype for transporting radioactive materials

  12. Feasibility study--computerized application of the hazardous material regulations

    Energy Technology Data Exchange (ETDEWEB)

    Ferrada, J.J.; Green, V.M.; Rawl, R.R.

    1992-09-01

    The feasibility of developing a full expert system for transportation and packaging of hazardous and radioactive materials was initiated within the framework of three subtasks: (1) analysis of commercial packages related to regulation scanning, (2) analysis of computer languages to develop the expert system, and (3) development of expert system prototypes. The strategy to develop the latter subtask was to first,develop modules to capture the knowledge of different areas of transportation and packaging and second, to analyze the feasibility of appending these different modules in one final full package. The individual modules development contemplated one prototype for transporting and packaging of radioactive material and another for transporting hazardous chemical materials. In the event that it is not feasible to link these two packages, the modules can always be used as stand-alone tools, or linked as a single package with some restrictions in their applicability. The work done during this fiscal year has focused on developing a prototype for transporting radioactive materials.

  13. A feasibility study for an International Year of Landcare

    Science.gov (United States)

    Mutota, E.; Arnalds, A.

    2009-04-01

    Human-induced activities place enormous pressures on the land worldwide, creating competition and conflict, and suboptimal use of the land. Climate change, loss of biodiversity and land degradation leads to decreasing productivity, food and water shortages, and reduced economic benefits, among others. In order to address these challenges and achieve sustainability goals, the need to change the way global resources are being utilized is crucial. A holistic and integrated community-based approach such as Landcare could be a viable approach to meet this worldwide challenge. Landcare is about committed people working together on land rehabilitation and restoration projects at the local level, transforming attitudes and stimulating new ideas among land users, generating support and building partnerships between and among local communities, governments and the private sector. Landcare initiatives have grown in a number of countries where success stories of actions on the ground clearly show the wider application of the Landcare approach in resolving many of the world's environmental problems and livelihood challenges. However, the potential of Landcare have not yet been widely exploited on a scale that really matters—as local actions build up towards global progress, there is more scope for unified efforts towards a global Landcare movement. Following the recommendation given at the International Forum on Soils, Society and Global Change in 2007 in Iceland (http://www.iisd.ca/YMB/SDFSS/), an International Year of Landcare should be established. Such a year would bring into focus efforts to build local capacity and share knowledge and experiences between provinces, countries and continents on Landcare. Additionally, holding a year concerned with Landcare would greatly contribute to the attainment of the Millennium Development Goals, the UN environmental conventions and many other sustainability goals. Our study supports the notion that Landcare offers a robust platform

  14. Seabed Filter Feasibility Study of Om Almisk Island

    KAUST Repository

    Sesler, Kathryn

    2012-06-01

    Freshwater access has always been and is continuing to be a severe problem in desert coastal regions, despite the fact that they have an unlimited supply of easily accessible saline water. Water desalination plants are well established and heavily relied upon throughout the Middle East, Saudi Arabia in particular. However, water desalination tends to be a very expensive and energy intensive solution to the problem. The transition from using open water intake systems and all of the pretreatment processes that they require, to using seabed water filters as an intake, would potentially reduce the lifetime costs, energy consumption, and environmental impacts commonly associated with water desalination. This is because the filtration process that the seabed filter generates, serves as sufficient pretreatment for seawater as well as eliminating any risk of entrainment or impingement of marine organisms. The main objective of this research is to conduct a feasibility study on Om Almisk Island, an island off the coast of King Abdullah University of Science and Technology (KAUST), to determine if it would be a suitable location to construct a seabed water filter as a replacement for the current open water intake. The Om Almisk Island site was evaluated through collection of sand samples over a radial grid around Om Almisk Island and sample analysis using grain size distribution, porosity, and hydraulic conductivity. The lack of mud, high hydraulic conductivity, proximity to KAUST, and the shallow waters of the sandy apron surrounding Om Almisk Island make this an ideal location for a seabed water filter to be used as an intake and pretreatment for the KAUST desalination plant. This location also has low tide change and the presence of benthic macrofauna to create bioturbation in the sediments, which could inhibit the growth of a schmutzdecke. If this biological layer forms, it could drastically reduce the hydraulic conductivity of the system. Due to the high hydraulic

  15. Introduction and feasibility study of the HD-270 MLC

    International Nuclear Information System (INIS)

    Kim, Dae Young; Kim Won Taek; Lee, Hwa Jung; Lee, Kang Hyeok

    2003-01-01

    The multileaf collimator(MLC) has many advantages, but use of the MLC increased effective penumbra and isodose undulation in dose distribution compared with that of an alloy block. In this work, we introduced the HD-270 MLC, which can improve the above disadvantages of MLC, and reported its feasibility study. The HD-270 MLC is a technique which combines the use of the existing Siemens multileaf collimator(3D MLC) with patient translation perpendicular to the leaf plane. The technique produces a smoothed isodose distribution with the reduced isodose undulation and effective penumbra. To assess the efficacy of the HD-270 technique and determine the appropriate resolution, a polygonal shaped MLC field was made to produce field edge angles from 0 degree to 75 degree with a step of 15 degree. Each HD-270 group was generated according to the allowed resolution, i. e., 5, 3, and 2 mm. The experiment was carried out on Primus, a Siemens linear accelerator configured with HD-270 MLC. The total 60 MU of 6 MV photon beam was delivered to X-Omat film (Kodak, USA) at a SAD of 100 cm and 1.5 cm depth in solid water phantom. Exposed films were scanned by Lumiscan75(LUMISYS) and analyzed using RIT113 software (Radiological Imaging Technology Inc., USA). To test the mechanical accuracy of table movement, the transverse, longitudinal, and vertical positions were controlled by a consol with ±5 mm, ±4 mm, ±3 mm, and ±2 mm steps, and then measured using a dial gauge with an accuracy of 0.001 inch. During the experiments, the table loaded with about 50 Kg human phantom to simulate the real treatment situation. The effective penumbra and isodose undulation became larger with increase the resolution and field edge angle. The accuracy of the table movement on each direction is good within the ±1 mm. Clinical use of the MLC can be increased by using of the HD-270 MLC which complements to the disadvantages of the MLC.

  16. Feasibility of a cohort study on health risks caused by occupational exposure to radiofrequency electromagnetic fields

    DEFF Research Database (Denmark)

    Breckenkamp, Jürgen; Berg-Beckhoff, Gabriele; Münster, Eva

    2009-01-01

    BACKGROUND: The aim of this study was to examine the feasibility of performing a cohort study on health risks from occupational exposure to radiofrequency electromagnetic fields (RF-EMF) in Germany. METHODS: A set of criteria was developed to evaluate the feasibility of such a cohort study...

  17. Evaluating run of the river hydropower feasibility and efficiency under climate change for UK study sites

    Science.gov (United States)

    Pasten-Zapata, Ernesto; Moggridge, Helen; Jones, Julie

    2015-04-01

    As renewable energy generation has been encouraged by the UK Government, hydropower importance has also been highlighted. Moreover, the UK Environment Agency has mapped feasible run of the river (ROR) hydropower sites within England and Wales and small hydropower schemes have been provided with economic grants by the Government to support their initial operation. However, ROR hydropower schemes depend on the available river flow volumes and are therefore vulnerable to variations in river regimes. Therefore, an analysis of the impacts of climate change towards existing and feasible run of the river schemes is important and required. The main objective of this research is to evaluate the impacts of climate change on river regimes and its implications to installed and feasible ROR hydropower operations by analyzing four study sites distributed across the UK. Study sites present different characteristics accounting for diverse properties of hydropower schemes including: catchment characteristics (topography, land use, climate, etc.), turbine type, turbine efficiency and head. Both feasible and currently operating schemes will be included in the analysis. Operating sites will be analysed according to their installed turbine type, hands off flow and maximum generation. On the other hand, feasible sites will be analysed considering different possible turbine types and changes in river flow that could affect the hands off flow and maximum generation thresholds. Future climate is simulated based on the temperature and precipitation outputs from Global Climate Models. Due to their relatively coarse resolution, output from these models will be downscaled, bias corrected and coupled to previously calibrated and validated hydrological models for each of the study catchments (linked to poster in session CL5.5/CR3.7/HS4.8/SSS12.14). By coupling model simulations of future climate change and hydrological models, future river flow volumes will be estimated and used as inputs for

  18. Strategic analysis for safeguards systems: a feasibility study. Volume 1. Main report

    International Nuclear Information System (INIS)

    Seaver, D.A.; Cohen, M.S.; Immerman, W.H.; Crane, F.L.; Goldman, A.J.

    1984-12-01

    Strategic analysis (game theory) is a formal method for modeling adversary situations that, when solved, yields an optimal strategy that maximizes the expected payoff to the player. As such, it appears to be potentially applicable in the nuclear material accounting context in which there is potential for an adversary attempting to divert special nuclear material. The NRC has previously supported research to develop preliminary strategic analysis models which has been considered to be only partially successful. This study reviewed previous efforts and other game theory research and assessed the feasibility of: (1) applying strategic analysis in a regulatory framework; (2) making strategic analysis understandable by licensees; and (3) assuring that strategic analysis can effectively be enforced. This report includes a discussion of the role of strategic analysis in material control and accounting, and of the mechanisms by which the NRC could implement strategic analysis. A set of feasibility criteria are described including both technical feasibility and organizational/implementation feasibility. Alternative strategic analysis model options are evaluated with respect to these criteria, as is the current material accounting practice. The assessment determined that the development of a payoff function that adequately represented the NRC's (and therefore the public's) values with respect to the consequences of diversion and the actions taken to prevent it is the most serious impediment to implementation. Given the limited role of material accounting in safeguards and the uncertainty regarding the development of a payoff function, the NRC should not proceed with full-scale implementation of strategic analysis. It does, however, have sufficient potential to warrant further development, with first priority going to the development of an appropriate payoff function

  19. An interactive distance solution for stroke rehabilitation in the home setting - A feasibility study.

    Science.gov (United States)

    Palmcrantz, Susanne; Borg, Jörgen; Sommerfeld, Disa; Plantin, Jeanette; Wall, Anneli; Ehn, Maria; Sjölinder, Marie; Boman, Inga-Lill

    2017-09-01

    In this study an interactive distance solution (called the DISKO tool) was developed to enable home-based motor training after stroke. The overall aim was to explore the feasibility and safety of using the DISKO-tool, customized for interactive stroke rehabilitation in the home setting, in different rehabilitation phases after stroke. Fifteen patients in three different stages in the continuum of rehabilitation after stroke participated in a home-based training program using the DISKO-tool. The program included 15 training sessions with recurrent follow-ups by the integrated application for video communication with a physiotherapist. Safety and feasibility were assessed from patients, physiotherapists, and a technician using logbooks, interviews, and a questionnaire. Qualitative content analysis and descriptive statistics were used in the analysis. Fourteen out of 15 patients finalized the training period with a mean of 19.5 minutes spent on training at each session. The DISKO-tool was found to be useful and safe by patients and physiotherapists. This study demonstrates the feasibility and safety of the DISKO-tool and provides guidance in further development and testing of interactive distance technology for home rehabilitation, to be used by health care professionals and patients in different phases of rehabilitation after stroke.

  20. Alcohol and substance screening and brief intervention for detainees kept in police custody. A feasibility study.

    Science.gov (United States)

    Chariot, Patrick; Lepresle, Aude; Lefèvre, Thomas; Boraud, Cyril; Barthès, Agnès; Tedlaouti, Menouar

    2014-01-01

    Screening and brief intervention programs related to addictive disorders have proven effective in a variety of environments. Both the feasibility and outcome of brief interventions performed in police custody by forensic physicians are unknown. Our objectives were to characterize addictive behaviors in detainees and to evaluate the feasibility of a brief intervention at the time of the medical examination in police custody. This prospective study included 1000 detainees in police custody who were examined by a physician for the assessment of fitness for detention. We used a standardized questionnaire and collected data concerning individual characteristics, addictive disorders, and reported assaults or observed injuries. 944 men and 56 women (94-6%) were studied. We found an addictive disorder in 708 of 1000 cases (71%), with the use of tobacco (62%), alcohol (36%), cannabis (35%), opiates (5%), and cocaine (4%) being the most common. A brief intervention was performed in 544 of these 708 cases (77%). A total of 139 of the 708 individuals (20%) expressed a willingness to change and 14 of 708 (2%) requested some information on treatment options. The main reasons why brief interventions were not performed were aggressive behaviors, drowsiness, or fanciful statements by the detainee. Brief interventions and screening for addictive behaviors in police custody are feasible in the majority of cases. The frequent link between addictive behaviors and the suspected crimes highlights the value of such interventions, which could be incorporated into the public health mission of the physician in police custody. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  1. Conductive Education as a Method of Stroke Rehabilitation: A Single Blinded Randomised Controlled Feasibility Study

    Directory of Open Access Journals (Sweden)

    Judith Bek

    2016-01-01

    Full Text Available Background. Conductive Education for stroke survivors has shown promise but randomised evidence is unavailable. This study assessed the feasibility of a definitive randomised controlled trial to evaluate efficacy. Methods. Adult stroke survivors were recruited through local community notices. Those completing the baseline assessment were randomised using an online program and group allocation was independent. Intervention group participants received 10 weekly 1.5-hour sessions of Conductive Education at the National Institute of Conductive Education in Birmingham, UK. The control group participants attended two group meetings. The study evaluated the feasibility of recruitment procedures, delivery of the intervention, retention of participants, and appropriateness of outcome measures and data collection methods. Independent assessments included the Barthel Index, the Stroke Impact Scale, the Timed Up and Go test, and the Hospital Anxiety and Depression Scale. Results. Eighty-two patients were enrolled; 77 completed the baseline assessment (46 men, mean age 62.1 yrs. and were randomised. 70 commenced the intervention (n=37 or an equivalent waiting period (n=33. 32/37 completed the 10-week training and 32/33 the waiting period. There were no missing items from completed questionnaires and no adverse events. Discussion. Recruitment, intervention, and assessment methods worked well. Transport issues for intervention and assessment appointments require review. Conclusion. A definitive trial is feasible. This trial is registered with ISRCTN84064492.

  2. Feasibility Study Evaluating Four Weeks Stochastic Resonance Whole-Body Vibration Training with Healthy Female Students

    Directory of Open Access Journals (Sweden)

    Slavko Rogan

    2013-07-01

    Full Text Available This study assessed the feasibility of stochastic resonance whole-body vibration (SR-WBV training and its impact on isometric maximal voluntary contraction (IMVC, isometric rate of force development (IRFD and a drop jump test (DJ in healthy female students. Twelve participants were randomised to static squats during SR-WBV 6 Hz, noise level 4, over 4 weeks or to a control group (no training. Feasibility outcomes included the number of students agreeing to participate, the number of drop-outs, the adherence to the SR-WBV and the evaluation of the protocol. Secondary outcomes were IMVC, IRFD and DJ. Results: Among 35 eligible students, 12 agreed to participate and two dropped out. The adherence was 41 of 60 possible sessions. There were moderate to large, but statistically non-significant, gains in the secondary outcomes. Conclusion: These results suggest that such a study would be feasible although with some modifications such as a better familiarisation to the DJ.

  3. Feasibility Study and Demonstration of an Aluminum and Ice Solid Propellant

    Directory of Open Access Journals (Sweden)

    Timothee L. Pourpoint

    2012-01-01

    Full Text Available Aluminum-water reactions have been proposed and studied for several decades for underwater propulsion systems and applications requiring hydrogen generation. Aluminum and water have also been proposed as a frozen propellant, and there have been proposals for other refrigerated propellants that could be mixed, frozen in situ, and used as solid propellants. However, little work has been done to determine the feasibility of these concepts. With the recent availability of nanoscale aluminum, a simple binary formulation with water is now feasible. Nanosized aluminum has a lower ignition temperature than micron-sized aluminum particles, partly due to its high surface area, and burning times are much faster than micron aluminum. Frozen nanoscale aluminum and water mixtures are stable, as well as insensitive to electrostatic discharge, impact, and shock. Here we report a study of the feasibility of an nAl-ice propellant in small-scale rocket experiments. The focus here is not to develop an optimized propellant; however improved formulations are possible. Several static motor experiments have been conducted, including using a flight-weight casing. The flight weight casing was used in the first sounding rocket test of an aluminum-ice propellant, establishing a proof of concept for simple propellant mixtures making use of nanoscale particles.

  4. Spar-Type Vertical-Axis Wind Turbines in Moderate Water Depth: A Feasibility Study

    Directory of Open Access Journals (Sweden)

    Ting Rui Wen

    2018-03-01

    Full Text Available The applications of floating vertical-axis wind turbines (VAWTs in deep water have been proposed and studied by several researchers recently. However, the feasibility of deploying a floating VAWT at a moderate water depth has not yet been studied. In this paper, this feasibility is thoroughly addressed by comparing the dynamic responses of spar-type VAWTs in deep water and moderate water depth. A short spar VAWT supporting a 5 MW Darrieus rotor at moderate water depth is proposed by following the deep spar concept in deep water. A fully coupled simulation tool, SIMO-RIFLEX-DMS code, is utilized to carry out time domain simulations under turbulent wind and irregular waves. Dynamic responses of the short spar and deep spar VAWTs are analyzed and compared, including the natural periods, wind turbine performance, platform motions, tower base bending moments, and tension of mooring lines. The statistical characteristics of the thrust and power production for both spars are similar. The comparison of platform motions and tower base bending moments demonstrate a good agreement for both spars, but the short spar has better performance in surge/sway motions and side–side bending moments. The 2P response dominates the bending moment spectra for both spars. A significant variation in tension of Mooring Line 1 and a larger corresponding spectrum value are found in the short spar concept. The results indicate that the application of short spar VAWTs is feasible and could become an alternative concept at moderate water depth.

  5. A comparison of videolaryngoscopes for tracheal intubation in predicted difficult airway: a feasibility study.

    Science.gov (United States)

    Vargas, Maria; Pastore, Antonio; Aloj, Fulvio; Laffey, John G; Servillo, Giuseppe

    2017-02-20

    Videolaryngoscopy has become increasingly attractive for the routine management of the difficult airway. Glidescope® is well studied in the literature while imago V-Blade® is a recent videolaryngoscope. This is a feasibility study with 1:1 case-control sequential allocation comparing Imago V-Blade ® and Glidescope® in predicted difficult airway settings. Two senior anesthesiologists with no clinical experience in video assisted intubation but previously trained in a simulated scenario, performed the endotracheal intubations with Imago V-Blade® and Glidescope®. A third experienced anesthesiologist supervised the procedures. Forty-two patients, 21 for each group, with the presence of predicted difficult airway according to the Italian guideline were included. The primary end point is the feasibility of intubation. The secondary end-points are the success to intubate in the first attempt, the intubation time, the Cormack and Lehane score view, the comparison of the intubation difficulty scale (IDS) score and the need for maneuvers to aid the endotracheal intubation comparing Imago V-Blade® and Glidescope®. The intubation was achieved in 100% of cases in both groups. No differences were found in the first-attempt success rate (p = 0.383), intubation time (p = 0.280), Cormack and Lehane score view (p = 0.799) and IDS score (p = 0.252). Statistical differences were found in external laryngeal pressure (p = 0.005), advancement of the blade (p = 0.024) and use of increasing lifting force (p = 0.048). This feasibility study showed that the intubation with the newly introduced Imago V-Blade® is feasible. Further randomized and/or non-inferiority trials are needed to evaluate the benefit of Imago V-Blade® in this procedure. Clinicaltrials.gov NCT02897518 . Retrospectively registered 25 August 2016.

  6. Feasibility Study for Vitrification of Sodium-Bearing Waste

    International Nuclear Information System (INIS)

    Quigley, J.J.; Raivo, B.D.; Bates, S.O.; Berry, S.M.; Nishioka, D.N.; Bunnell, P.J.

    2000-01-01

    Treatment of sodium-bearing waste (SBW) at the Idaho Nuclear Technology and Engineering Center (INTEC) within the Idaho National Engineering and Environmental Laboratory is mandated under a Settlement Agreement between the Department of Energy and the State of Idaho. One of the requirements of the Settlement Agreement is the complete calcination (i.e., treatment) of all SBW by December 31, 2012. One of the proposed options for treatment of SBW is vitrification. This study will examine the viability of SBW vitrification. This study describes the process and facilities to treat the SBW, from beginning waste input from INTEC Tank Farm to the final waste forms. Schedules and cost estimates for construction and operation of a Vitrification Facility are included. The study includes a facility layout with drawings, process description and flow diagrams, and preliminary equipment requirements and layouts

  7. Feasibility Study for Vitrification of Sodium-Bearing Waste

    Energy Technology Data Exchange (ETDEWEB)

    J. J. Quigley; B. D. Raivo; S. O. Bates; S. M. Berry; D. N. Nishioka; P. J. Bunnell

    2000-09-01

    Treatment of sodium-bearing waste (SBW) at the Idaho Nuclear Technology and Engineering Center (INTEC) within the Idaho National Engineering and Environmental Laboratory is mandated under a Settlement Agreement between the Department of Energy and the State of Idaho. One of the requirements of the Settlement Agreement is the complete calcination (i.e., treatment) of all SBW by December 31, 2012. One of the proposed options for treatment of SBW is vitrification. This study will examine the viability of SBW vitrification. This study describes the process and facilities to treat the SBW, from beginning waste input from INTEC Tank Farm to the final waste forms. Schedules and cost estimates for construction and operation of a Vitrification Facility are included. The study includes a facility layout with drawings, process description and flow diagrams, and preliminary equipment requirements and layouts.

  8. Developing a Hypnotic Relaxation Intervention to Improve Body Image: A Feasibility Study.

    Science.gov (United States)

    Cieslak, Alison; Elkins, Gary; Banerjee, Tanima; Marsack, Jessica; Hickman, Kimberly; Johnson, Alisa; Henry, Norah; Barton, Debra

    2016-11-01

    To determine the content, feasibility, and best outcome of a mind-body intervention involving self-directed hypnotic relaxation to target body image.
. A five-week, uncontrolled, unblinded feasibility intervention study.
. Behavioral therapy offices in Ann Arbor, Michigan, and Waco, Texas.
. 10 female breast cancer survivors and 1 breast and gynecologic cancer survivor. 
. Adult women with a history of breast and gynecologic cancer and no major psychiatric history were eligible. The intervention included four face-to-face sessions with a research therapist lasting 40-60 minutes, logged home practice, one telephone check-in call at week 5, and one intervention feedback telephone call to complete the study. Descriptive statistics and paired t-tests were used to test feasibility and content validity.
. Stress from body changes as measured by the Impact of Treatment Scale, sexual function as measured by the Female Sexual Function Index, and sexual self-image as measured by the Sexual Self-Schema Scale for women were the variables of interest.
. The intervention content was confirmed. Changes in scores from the baseline to week 5 suggested that stress from body changes decreased and sexual self-schema and function improved during the intervention. Nine of the 11 women were satisfied with the intervention, and all 11 indicated that their body image improved. 
. Hypnotic relaxation therapy shows promise for improving body image and, in doing so, improving sexual health in this population. Additional testing of this intervention is warranted.
. Hypnotic relaxation therapy is feasible to improve body image and sexual health in women diagnosed with cancer and may be an important intervention that could be offered by nurses and other behavioral therapists.

  9. National Assistive Technology Information & Program Referral Feasibility and Desirability Study. Final Report.

    Science.gov (United States)

    Yajnik, Girish G.; Lopez-DeFede, Ana

    This final report presents results of a feasibility study and implementation plan concerning the establishment of a national assistive technology information and referral (ATI&R) network. The study explored the feasibility of establishing such a network from two perspectives: the current processes used to disseminate information about assistive…

  10. Failure Modes and Effects Analysis (FMEA) Assistant Tool Feasibility Study

    Science.gov (United States)

    Flores, Melissa; Malin, Jane T.

    2013-01-01

    An effort to determine the feasibility of a software tool to assist in Failure Modes and Effects Analysis (FMEA) has been completed. This new and unique approach to FMEA uses model based systems engineering concepts to recommend failure modes, causes, and effects to the user after they have made several selections from pick lists about a component s functions and inputs/outputs. Recommendations are made based on a library using common failure modes identified over the course of several major human spaceflight programs. However, the tool could be adapted for use in a wide range of applications from NASA to the energy industry.

  11. NIR spectrometry for counterfeit drug detection - A feasibility study

    DEFF Research Database (Denmark)

    Rodionova, O.Y.; Houmøller, Lars P.; Pomerantsev, A.L.

    2005-01-01

    for mathematical data processing for false drugs detection is demonstrated. Also, multivariate hyperspectral image analysis is applied providing additional diagnostic information. Hyperspectral imaging is becoming a useful diagnostic tool for identifying non-homogeneous spatial regions of drug formulation. Two......Express-methods for detection of counterfeit drugs are of vital necessity. Visual control, dissociating tests or simple color reaction tests reveal only very rough forgeries. The feasibility of information-rich NIR-measurements as an analytical method together with multivariate calibration...... types of drugs are used to demonstrate the applicability of these approaches....

  12. Cogeneration using small sized series connected units: Feasibility study

    International Nuclear Information System (INIS)

    Tondelli, F.; Bergamini, G.

    1992-01-01

    This paper evidences the technical/economic feasibility of the use of methane fuelled modular cogeneration systems based on small series connected Otto or Diesel cycle engines delivering from 20 to 90 kW of power. Ample reference is made to the successful application of modular cogeneration systems to supply low temperature thermal energy to hospitals, hotels, food processing firms, etc., in Italy. The cost benefit analysis covers many aspects: design, manufacturing, operation, performance, maintenance and safety. Suggestions are also made as to optimum contractual arrangements for equipment service and maintenance, as well as, for the exchange of power with local utilities

  13. Feasibility study of 5MW superconducting wind turbine generator

    DEFF Research Database (Denmark)

    Abrahamsen, Asger Bech; Jensen, Bogi Bech; Seiler, E.

    2011-01-01

    The feasibility of installing a direct drive superconducting generator in the 5MW reference offshore wind turbine of the National Renewable Energy Laboratory (NREL) has been examined. The engineering current densities Je obtained in a series of race track coils have been combined with magnetization...... measurements to estimate the properties of suitable field coils for a synchronous generator, which is more light weight than the conventional used combination of a gear box and a fast rotating generator. An analytical model and finite element simulations have been used to estimate the active mass of generators...

  14. Adaptive optics in coherent lidar wind measurements: A feasibility study

    Science.gov (United States)

    Leland, Robert P.

    1991-01-01

    Laser Doppler radar (lidar) is widely used for remote sensing of wind velocities. Usable wavelengths for the laser are limited by the effects of atmospheric turbulence. An adaptive optical system is proposed to compensate for turbulence effects on signal power. The feasibility of an adaptive system is considered in light of the effects of speckle from the aerosol target. It is concluded that adaptive optics is a promising technique for improving the performance of a 2 micron lidar wind measurement system. The chief technical challenges are a laser that will give the required output and pulse repetition rate, a combined Hartmann sensor and heterodyne detector, and a suitable reconstruction algorithm.

  15. A feasibility study of conducting the Montreal Cognitive Assessment remotely in individuals with movement disorders.

    Science.gov (United States)

    Abdolahi, Amir; Bull, Michael T; Darwin, Kristin C; Venkataraman, Venayak; Grana, Matthew J; Dorsey, E Ray; Biglan, Kevin M

    2016-06-01

    Remote assessments of individuals with a neurological disease via telemedicine have the potential to reduce some of the burdens associated with clinical care and research participation. We aim to evaluate the feasibility of conducting the Montreal Cognitive Assessment remotely in individuals with movement disorders. A pilot study derived from two telemedicine trials was conducted. In total, 17 individuals with movement disorders (8 with Parkinson disease and 9 with Huntington disease) had Montreal Cognitive Assessment examinations evaluated in-person and remotely via web-based video conferencing to primarily determine feasibility and potential barriers in its remote administration. Administering the Montreal Cognitive Assessment remotely in a sample of movement disorder patients with mild cognitive impairment is feasible, with only minor common complications associated with technology, including delayed sound and corrupted imaging for participants with low connection speeds. The Montreal Cognitive Assessment has the potential to be used in remote assessments of patients and research participants with movement disorders. © The Author(s) 2014.

  16. Insect monitoring with fluorescence lidar techniques: feasibility study.

    Science.gov (United States)

    Brydegaard, Mikkel; Guan, Zuguang; Wellenreuther, Maren; Svanberg, Sune

    2009-10-20

    We investigate the possibilities of light detection and ranging (lidar) techniques to study migration of the damselfly species Calopteryx splendens and C. virgo. Laboratory and testing-range measurements at a distance of 60 m were performed using dried, mounted damselfly specimens. Laboratory measurements, including color photography in polarized light and spectroscopy of reflectance and induced fluorescence, reveal that damselflies exhibit reflectance and fluorescence properties that are closely tied to the generation of structural color. Lidar studies on C. splendens of both genders show that gender can be remotely determined, especially for specimens that were marked with Coumarin 102 and Rhodamine 6G dyes. The results obtained in this study will be useful for future field experiments, and provide guidelines for studying damselflies in their natural habitat using lidar to survey the air above the river surface. The findings will be applicable for many other insect species and should, therefore, bring new insights into migration and movement patterns of insects in general.

  17. Feasibility study of a cyclotron complex for hadron therapy

    Science.gov (United States)

    Smirnov, V.; Vorozhtsov, S.

    2018-04-01

    An accelerator complex for hadron therapy based on a chain of cyclotrons is under development at JINR (Dubna, Russia), and the corresponding conceptual design is under preparation. The complex mainly consists of two superconducting cyclotrons. The first accelerator is a compact cyclotron used as an injector to the main accelerator, which is a six-fold separated sector machine. The facility is intended for generation of protons and carbon beams. The H2+ and 12C6+ ions from the corresponding ECR ion sources are accelerated in the injector-cyclotron up to the output energy of 70 MeV/u. Then, the H2+ ions are extracted from the injector by a stripping foil, and the resulting proton beam with the energy of 70 MeV is used for medical purposes. After acceleration in the main cyclotron, the carbon beam can be either used directly for therapy or introduced to the main cyclotron for obtaining the final energy of 400 MeV/u. The basic requirements to the project are the following: compliance to medical requirements, compact size, feasible design, and high reliability of all systems of the complex. The advantages of the dual cyclotron design can help reaching these goals. The initial calculations show that this design is technically feasible with acceptable beam dynamics. The accelerator complex with a relatively compact size can be a good solution for medical applications. The basic parameters of the facility and detailed investigation of the magnetic system and beam dynamics are described.

  18. The feasibility study on fuel types for the KALIMER

    International Nuclear Information System (INIS)

    Hwang, W.; Nam, C.; Yim, J. S.; Na, B. C.; Hahn, D. H.; Kim, Y. I.; Kim, Y. C.; Park, C. K.

    1997-08-01

    The economics of LMR is largely dependent on the construction cost of the power plant, and the fuel cycle options usually constitute 20 to 30 % of total electricity generation cost. The choice of fuel cycle technology and the fuel type is important in order to develop a LMR with better economics, performance and safety. The LMR fuel types, whose performances have been proven up to 15 at% burnup, are MOX and IFR metal fuel. The base alloy, binary (U-10% Zr) metal fuel with HT9 is used as structural materials of KALIMER. The design concept of KALIMER fuel has been established through the investigation of technical feasibilities on the fuel and recycle systems for MOX and IFR metal fuel. According to the results of comparative analysis for MOX and metal fuel, metal fuel is better than MOX in view of safety, in-reactor performance, nuclear characteristics, economics and non-proliferation, while MOX fuels have advantages in the developmental status and technical cooperation potential. The overall performance of binary (U-10% Zr) metal fuel with HT9 cladding, which is a potential start-up fuel for KALIMER, is not only superior to that of MOX fuel, but also has enough technical feasibility in its high-burnup performance, safety and economics. (author). 54 ref., 13 tabs., 20 figs

  19. Spirometry in elderly laryngectomized patients: A feasibility study.

    Science.gov (United States)

    Izzo, Alessandro; Perrotta, Fabio; Cennamo, Antonio; Cerqua, Francesco Saverio; Rinaldi, Luca; Mazzella, Antonio; Grella, Edoardo; Tranfa, Carmelindo; Bianco, Andrea; Stefanelli, Francesco; Mazzarella, Gennaro

    2016-09-01

    Laryngeal cancer is the second most common respiratory neoplasm after lung cancer. Laryngectomy is a well established treatment for larynx cancers which involve relevant anatomic alterations. Spirometry is an essential investigation tool for diagnosis and severity of respiratory diseases, difficult to perform in laryngectomees. 43 consecutive laryngectomized patients were enrolled from July 2014 to March 2015. Patients fulfilling inclusion criteria underwent spirometry at baseline assessment and after two days. During the examination, the spirometer was placed directly on the stoma of the patient, through mouthpiece "Spirometry Filter 74". At baseline, 26 eligible laryngectomees correctly performed the spirometry test with mouthpiece adhering to the stoma; 4 patients refused to perform the second spirometry after 2 days. The feasibility of spirometry examination in these patients was 100% despite difficulties in the execution of the test. The Pearson coefficient of reproducibility for FEV1, FVC and Tiffeneau Index was, respectively, 0.98, 0.94 and 0.77. Spirometry in laryngectomee patients is a feasible procedure for assessment of respiratory function; despite technical difficulties in the execution of the test, our results underline the reproducibility and repeatability of the spirometry. In conclusion, when performed within dedicated respiratory pathophysiology unit, spirometry is a reliable tool in the assessment and follow up of laryngectomees. Copyright © 2016 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

  20. Echocardiography-based hemodynamic management of left ventricular diastolic dysfunction: a feasibility and safety study.

    Science.gov (United States)

    Shillcutt, Sasha K; Montzingo, Candice R; Agrawal, Ankit; Khaleel, Maseeha S; Therrien, Stacey L; Thomas, Walker R; Porter, Thomas R; Brakke, Tara R

    2014-11-01

    Patients with left ventricular diastolic dysfunction (LVDD) are at increased risk of postoperative adverse events. The primary aim of this study was to evaluate the safety and feasibility of using echocardiography-guided hemodynamic management (EGHEM) during surgery in subjects with LVDD compared to conventional management. The feasibility of using echocardiography to direct a treatment algorithm and clinical outcomes were compared for safety between groups. Subjects were screened for LVDD by preoperative transthoracic echocardiography (TTE) and randomized to the conventional or EGHEM group. Subjects in EGHEM received hemodynamic management based on left ventricular filling patterns on transesophageal echocardiography (TEE). Primary outcomes measured were the feasibility to obtain TEE images and follow a TEE-based treatment algorithm. Safety outcomes also compared the following clinical differences between groups: length of hospitalization, incidence of atrial fibrillation, congestive heart failure (CHF), myocardial infarction, cerebrovascular accident, transient ischemic attack and renal failure measured 30 days postoperatively. Population consisted of 28 surgical subjects (14 in conventional group and 14 in EGHEM group). Mean subject age was 73.4 ± 6.7 years (36% male) in conventional group and 65.9 ± 14.4 years (36% male) in EGHEM group. Procedures included orthopedic (conventional = 29%, EGHEM 36%), general (conventional = 50%, EGHEM = 36%), vascular (conventional = 7%, EGHEM = 21%), and thoracic (conventional = 14%, EGHEM = 7%). There was no statistically significant difference in adverse clinical events between the 2 groups. The EGHEM group had less CHF, atrial fibrillation, and shorter length of stay. Echocardiography-guided hemodynamic management of patients with LVDD during surgery is feasible and may be a safe alternative to conventional management. © 2014, Wiley Periodicals, Inc.

  1. Dignity Therapy for People with Motor Neuron Disease and Their Family Caregivers: A Feasibility Study

    Science.gov (United States)

    Chochinov, Harvey M.; Kristjanson, Linda J.

    2015-01-01

    Abstract Background: There are calls to explore psychological interventions to reduce distress in patients with motor neuron disease (MND) and their family caregivers. Dignity therapy is a short-term psychotherapy intervention shown to alleviate distress for people with life-limiting illnesses. Objectives: To assess the acceptability, feasibility, and effectiveness of dignity therapy to reduce distress in people with MND and their family caregivers. Methods: The study used a repeated-measures design pre- and post-intervention. Acceptability and feasibility were assessed using participants' ratings of the helpfulness of the intervention across several domains and time and resources required. Effectiveness measures for patients included: dignity-related distress, hopefulness, and spiritual well-being; and those for family caregivers included burden, hopefulness, anxiety, and depression. Results: Twenty-seven patients and 18 family caregivers completed the intervention. Dignity therapy was well accepted, including those patients who required assisted communication devices. The feasibility may be limited in small or not well-resourced services. There were no significant differences in all outcome measures for both groups. However, the high satisfaction and endorsement of dignity therapy by patients suggests it has influenced various important aspects of end-of-life experience. Family caregivers overwhelmingly agreed that the dignity therapy document is and will continue to be a source of comfort to them and they would recommend dignity therapy to others in the same situation. Conclusions: This is the first dignity therapy study to focus on MND and on home-based caregiving. Results established the importance of narrative and generativity for patients with MND and may open the door for other neurodegenerative conditions. PMID:25314244

  2. Feasibility Study of Hydrogen Production at Existing Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Schey

    2009-07-01

    Cooperative Agreement DE-FC07-06ID14788 was executed between the U.S. Department of Energy, Electric Transportation Applications, and Idaho National Laboratory to investigate the economics of producing hydrogen by electrolysis using electricity generated by nuclear power. The work under this agreement is divided into the following four tasks: Task 1 – Produce Data and Analyses Task 2 – Economic Analysis of Large-Scale Alkaline Electrolysis Task 3 – Commercial-Scale Hydrogen Production Task 4 – Disseminate Data and Analyses. Reports exist on the prospect that utility companies may benefit from having the option to produce electricity or produce hydrogen, depending on market conditions for both. This study advances that discussion in the affirmative by providing data and suggesting further areas of study. While some reports have identified issues related to licensing hydrogen plants with nuclear plants, this study provides more specifics and could be a resource guide for further study and clarifications. At the same time, this report identifies other area of risks and uncertainties associated with hydrogen production on this scale. Suggestions for further study in some of these topics, including water availability, are included in the report. The goals and objectives of the original project description have been met. Lack of industry design for proton exchange membrane electrolysis hydrogen production facilities of this magnitude was a roadblock for a significant period. However, recent design breakthroughs have made costing this facility much more accurate. In fact, the new design information on proton exchange membrane electrolyzers scaled to the 1 kg of hydrogen per second electrolyzer reduced the model costs from $500 to $100 million. Task 1 was delayed when the original electrolyzer failed at the end of its economic life. However, additional valuable information was obtained when the new electrolyzer was installed. Products developed during this study

  3. Study on 'Tannix' an absorbent for heavy metals including uranium

    International Nuclear Information System (INIS)

    Nakamura, Yasuo

    1997-01-01

    To treat radioactive wastes including uranium and transuranic elements such as plutonium, americium etc., development of an absorbent which can be used to absorb and isolate these elements without producing secondary wastes after treatment was attempted. And an absorbent has been successfully developed by polymerizing tannin, a natural product. It is known that tannin binds heavy metals including uranium resulting to produce their precipitates. There are some reports suggesting its absorption ability for uranium. However, tannin has not been used to isolate a heavy metal from a solution because it is soluble in water. Here, insolubilization of tannin was attempted and a manufacturing method for a gelatinized insoluble tannin named as ''Tannix'' was established. Wattle tannin extracted from Mimosa pudica produced in Africa was dissolved in an alkaline solution and gelatinized by heating after the addition of formalin. Thus obtained insoluble tannin was used after crushing and sieving. This product, ''Tannix'' was able to absorb more than 99% of uranium in the waste. And the absorbed Tannin could be degraded by incineration even at a low temperature, leaving only uranium, but not producing any secondary product. (M.N.)

  4. Study on `Tannix` an absorbent for heavy metals including uranium

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Yasuo [Mitsubishi Nuclear Fuel Co. Ltd., Tokyo (Japan)

    1997-09-01

    To treat radioactive wastes including uranium and transuranic elements such as plutonium, americium etc., development of an absorbent which can be used to absorb and isolate these elements without producing secondary wastes after treatment was attempted. And an absorbent has been successfully developed by polymerizing tannin, a natural product. It is known that tannin binds heavy metals including uranium resulting to produce their precipitates. There are some reports suggesting its absorption ability for uranium. However, tannin has not been used to isolate a heavy metal from a solution because it is soluble in water. Here, insolubilization of tannin was attempted and a manufacturing method for a gelatinized insoluble tannin named as ``Tannix`` was established. Wattle tannin extracted from Mimosa pudica produced in Africa was dissolved in an alkaline solution and gelatinized by heating after the addition of formalin. Thus obtained insoluble tannin was used after crushing and sieving. This product, ``Tannix`` was able to absorb more than 99% of uranium in the waste. And the absorbed Tannin could be degraded by incineration even at a low temperature, leaving only uranium, but not producing any secondary product. (M.N.)

  5. Feasibility study for the redesign of MDOT's pavement management systems software.

    Science.gov (United States)

    2011-04-01

    In August of 2006 the Mississippi Department of Transportation (MDOT) initiated State Study No. 191, entitled Feasibility : Study for the Redesign of MDOTs Pavement Management System (PMS) Software. At the initiation of this study, the : Dep...

  6. Feasibility studies of solar energy potentials for rural electrification in Nigeria

    Energy Technology Data Exchange (ETDEWEB)

    Aliyu, U.O.; Suleiman, A.T.

    1981-01-01

    The initial phase of the feasibility study utilizing solar energy resource for decentralized small-scale rural electrification schemes in Nigeria has been investigated. Some aspects of the technical and economic feasibility evaluations have been examined; and the development of solar energy resource for rural electrification schemes appears to provide good alternative to the conventional energy resources.

  7. Feasibility study of ultrasonic/sonic flowmeters for coal slurries

    Energy Technology Data Exchange (ETDEWEB)

    Raptis, A.C.; Doolittle, R.; Popper, G.F.; Fitzgerald, J.W.; Carey, W.M.

    1976-10-01

    An analysis of sonic techniques for flow measurement in coal slurries shows that operation of a transmission type flowmeter is feasible for a range of one meter at a frequency range of 32.5 kHz to 400 kHz and a range of ten centimeters at a frequency range of 325 kHz to 1 MHz using the sonar equation as the measure of performance. Slurries with moderate concentrations of 10 to 30 percent solids by volume and particle size of 100 microns are assumed. Based on this assumption, the attenuation constant, the transmission loss, the directional gain, the source level and the processing gain for the transmission type flowmeter are determined.

  8. Coaching at the Building Site – A Feasibility Study

    DEFF Research Database (Denmark)

    Koch, Christian; Alsdorf, Morten; Sander, Dag

    2006-01-01

    Coaching has become widely used in business, and is well described. However it is rarely used in construction. This makes a contrast to the poor performance of site interaction, leading to a vast amount of reported cooperation and coordination problems. This paper investigates the feasibility...... of a coaching approach to site management. The coach is a person who helps and guides another person or group to maximize his /their own capacity. Coaching arguably is useful in many different work situations, for example problem solving, group working and planning. These assumptions are evaluated through...... observations in a building site operating with lean construction, where the managers did not use coaching consciously in their interaction with employees. 29 participant observations of five of the managers at the building site were carried out, at individual- and group meetings. Coaching can be used...

  9. ASHAs involvement in newborn care: a feasibility study.

    Science.gov (United States)

    Stalin, P; Krishnan, Anand; Rai, Sanjay K; Agarwal, Ramesh K

    2011-11-11

    We assessed the feasibility of involvement of Accredited Social Health Activist (ASHA) in newborn care. All the ASHAs (n = 33) of PHC Dayalpur, Faridabad district of Haryana were trained for one day which was followed by two refresher trainings. The mean (SD) knowledge score (out of 11) of ASHAs were 6.45 (2.44), 6.50 (2.01), 7.45 (1.36) and 7.15 (1.27) at pre-training, immediately after training, and after three and six months, respectively. Four fifth (83%) of the newborns born at home were weighed within 3 days of birth. About half (44%) of ASHAs weighed the neonates within ± 250 grams of the weight recorded by the author. We conclude that ASHAs could be involved in providing care for newborn. However, such efforts should ensure a stronger focus on skill development and practical experience.

  10. Feasibility study to establish a new value chain

    DEFF Research Database (Denmark)

    Ingrid Herman, Marie; Thai, Thi Minh

    Since the 90s value chain (VC) approaches have received considerable attention by governments and development agencies for poverty reduction and strengthening the private sector. VC analysis has been used for developing intervention strategies to upgrade existing or to establish new VCs. Despite......-harvesting of Gleichenia ferns in New Caledonia using a holistic framework combining relevant conceptual elements and various analytical tools in VC literature. Results showed the importance of starting with understanding goals of establishing the VC. In this case goals were creating employment in remote areas...... responsibility for value-creation and distribution activities. Finally, the feasibility analysis underlined the importance of reflecting on findings from the previous analyses with regards to set goals in order to identify (mis)matches between expected benefits from the established VC and goals as well...

  11. Peace psychology should include the study of peaceful individuals.

    Science.gov (United States)

    Nelson, Linden L

    2014-09-01

    The selection of topics for the special issue on peace psychology (October 2013) probably gave readers the impression that peace psychology should be defined as the study of conflict and peace at intergroup, societal, and global levels. (c) 2014 APA, all rights reserved.

  12. Remedidal investigation and feasibility study report for the Environmental Restoration Disposal Facility

    Energy Technology Data Exchange (ETDEWEB)

    Roeck, F.V.

    1994-06-01

    The purpose of the remedial investigation (RI) is to collect data necessary to adequately characterize the site for the purpose of developing and evaluating effective remedial alternatives. To characterize the site, the lead agency shall, as appropriate, conduct field investigations, including treatability studies, and conduct a baseline risk assessment. The RI provides information to assess the risks to human health and the environment and to support the development, evaluation, and selection of appropriate response alternatives. The primary objective of the feasibility study (FS) is to ensure that appropriate remedial alternatives are developed and evaluated such that relevant information concerning the remedial action options can be presented to a decision-maker and an appropriate remedy selected. The lead agency may develop a feasibility study to address a specific site problem or the entire site. The development and evaluation of alternatives shall reflect the scope and complexity of the remedial action under consideration and the site problems being addressed. Development of alternatives shall be fully integrated with the site characterization activities of the remedial investigation described in paragraph (d) of this section. The lead agency shall include an alternatives screening step, when needed, to select a reasonable number of alternatives for detailed analysis.

  13. Remedidal investigation and feasibility study report for the Environmental Restoration Disposal Facility

    International Nuclear Information System (INIS)

    Roeck, F.V.

    1994-06-01

    The purpose of the remedial investigation (RI) is to collect data necessary to adequately characterize the site for the purpose of developing and evaluating effective remedial alternatives. To characterize the site, the lead agency shall, as appropriate, conduct field investigations, including treatability studies, and conduct a baseline risk assessment. The RI provides information to assess the risks to human health and the environment and to support the development, evaluation, and selection of appropriate response alternatives. The primary objective of the feasibility study (FS) is to ensure that appropriate remedial alternatives are developed and evaluated such that relevant information concerning the remedial action options can be presented to a decision-maker and an appropriate remedy selected. The lead agency may develop a feasibility study to address a specific site problem or the entire site. The development and evaluation of alternatives shall reflect the scope and complexity of the remedial action under consideration and the site problems being addressed. Development of alternatives shall be fully integrated with the site characterization activities of the remedial investigation described in paragraph (d) of this section. The lead agency shall include an alternatives screening step, when needed, to select a reasonable number of alternatives for detailed analysis

  14. A study of helicopter stability and control including blade dynamics

    Science.gov (United States)

    Zhao, Xin; Curtiss, H. C., Jr.

    1988-01-01

    A linearized model of rotorcraft dynamics has been developed through the use of symbolic automatic equation generating techniques. The dynamic model has been formulated in a unique way such that it can be used to analyze a variety of rotor/body coupling problems including a rotor mounted on a flexible shaft with a number of modes as well as free-flight stability and control characteristics. Direct comparison of the time response to longitudinal, lateral and directional control inputs at various trim conditions shows that the linear model yields good to very good correlation with flight test. In particular it is shown that a dynamic inflow model is essential to obtain good time response correlation, especially for the hover trim condition. It also is shown that the main rotor wake interaction with the tail rotor and fixed tail surfaces is a significant contributor to the response at translational flight trim conditions. A relatively simple model for the downwash and sidewash at the tail surfaces based on flat vortex wake theory is shown to produce good agreement. Then, the influence of rotor flap and lag dynamics on automatic control systems feedback gain limitations is investigated with the model. It is shown that the blade dynamics, especially lagging dynamics, can severly limit the useable values of the feedback gain for simple feedback control and that multivariable optimal control theory is a powerful tool to design high gain augmentation control system. The frequency-shaped optimal control design can offer much better flight dynamic characteristics and a stable margin for the feedback system without need to model the lagging dynamics.

  15. Feasibility and acceptability of reducing workplace sitting time: a qualitative study with Australian office workers.

    Science.gov (United States)

    Hadgraft, Nyssa T; Brakenridge, Charlotte L; LaMontagne, Anthony D; Fjeldsoe, Brianna S; Lynch, Brigid M; Dunstan, David W; Owen, Neville; Healy, Genevieve N; Lawler, Sheleigh P

    2016-09-05

    Office workers spend a large proportion of their working hours sitting. This may contribute to an increased risk of chronic disease and premature mortality. While there is growing interest in workplace interventions targeting prolonged sitting, few qualitative studies have explored workers' perceptions of reducing occupational sitting outside of an intervention context. This study explored barriers to reducing office workplace sitting, and the feasibility and acceptability of strategies targeting prolonged sitting in this context. Semi-structured interviews were conducted with a convenience sample of 20 office workers (50 % women), including employees and managers, in Melbourne, Australia. The three organisations (two large, and one small organisation) were from retail, health and IT industries and had not implemented any formalised approaches to sitting reduction. Questions covered barriers to reducing sitting, the feasibility of potential strategies aimed at reducing sitting, and perceived effects on productivity. Interviews were audiotaped and transcribed verbatim. Data were analysed using thematic analysis. Participants reported spending most (median: 7.2 h) of their working hours sitting. The nature of computer-based work and exposure to furniture designed for a seated posture were considered to be the main factors influencing sitting time. Low cost strategies, such as standing meetings and in-person communication, were identified as feasible ways to reduce sitting time and were also perceived to have potential productivity benefits. However, social norms around appropriate workplace behaviour and workload pressures were perceived to be barriers to uptake of these strategies. The cost implications of height-adjustable workstations influenced perceptions of feasibility. Managers noted the need for an evidence-based business case supporting action on prolonged sitting, particularly in the context of limited resources and competing workplace health priorities

  16. Feasibility and acceptability of reducing workplace sitting time: a qualitative study with Australian office workers

    Directory of Open Access Journals (Sweden)

    Nyssa T. Hadgraft

    2016-09-01

    Full Text Available Abstract Background Office workers spend a large proportion of their working hours sitting. This may contribute to an increased risk of chronic disease and premature mortality. While there is growing interest in workplace interventions targeting prolonged sitting, few qualitative studies have explored workers’ perceptions of reducing occupational sitting outside of an intervention context. This study explored barriers to reducing office workplace sitting, and the feasibility and acceptability of strategies targeting prolonged sitting in this context. Methods Semi-structured interviews were conducted with a convenience sample of 20 office workers (50 % women, including employees and managers, in Melbourne, Australia. The three organisations (two large, and one small organisation were from retail, health and IT industries and had not implemented any formalised approaches to sitting reduction. Questions covered barriers to reducing sitting, the feasibility of potential strategies aimed at reducing sitting, and perceived effects on productivity. Interviews were audiotaped and transcribed verbatim. Data were analysed using thematic analysis. Results Participants reported spending most (median: 7.2 h of their working hours sitting. The nature of computer-based work and exposure to furniture designed for a seated posture were considered to be the main factors influencing sitting time. Low cost strategies, such as standing meetings and in-person communication, were identified as feasible ways to reduce sitting time and were also perceived to have potential productivity benefits. However, social norms around appropriate workplace behaviour and workload pressures were perceived to be barriers to uptake of these strategies. The cost implications of height-adjustable workstations influenced perceptions of feasibility. Managers noted the need for an evidence-based business case supporting action on prolonged sitting, particularly in the context of

  17. Structured Narrative Retell Instruction for Young Children from Low Socioeconomic Backgrounds: A Preliminary Study of Feasibility

    Directory of Open Access Journals (Sweden)

    Suzanne M Adlof

    2014-05-01

    Full Text Available Successful acquisition of literacy depends on adequate development of decoding skills as well as broader, meaning-related knowledge and skills for text comprehension. Children from low socioeconomic status (SES backgrounds are often challenged in both domains, relative to peers who are not economically disadvantaged. The efficacy of code-focused instructional programs for at-risk preliterate children is well supported, but less evidence is available regarding interventions to improve broader language and comprehension skills. This preliminary study tested the feasibility of a new intervention, structured narrative retell instruction (SNRI, and explored its potential to enhance meaning-related knowledge and skills, including vocabulary, listening comprehension, and narrative skills, in pre-literate, low SES children. SNRI used authentic children’s books to model comprehension processes, explicitly teach story grammar, and implicitly target microstructural aspects of narratives. Participants included 9 children with a mean age of 60 months, who were randomly assigned to SNRI or to code-focused literacy instruction (CFLI. Each group received 12, 40-minute instructional sessions over six weeks. Pre- and posttests were administered to assess vocabulary, listening comprehension, narrative macrostructure and narrative microstructure, as well as alphabet knowledge, phonological awareness, and concepts of print. The feasibility of SNRI was demonstrated by completion of the designed study, moderately high treatment fidelity, and qualitative feedback from interventionists. The SNRI group also made significant gains on four of the seven meaning-related measures (p < .10. In comparison, the CFLI group made significant gains on two of seven meaning-related measures. We conclude that SNRI is feasible and shows potential for improving language skills related to comprehension and that further research investigating its efficacy is warranted.

  18. On PAR: A feasibility study of the Promoting Adult Resilience programme with mental health nurses.

    Science.gov (United States)

    Foster, Kim; Shochet, Ian; Wurfl, Astrid; Roche, Michael; Maybery, Darryl; Shakespeare-Finch, Jane; Furness, Trentham

    2018-02-27

    Mental health settings are recognized as complex, unpredictable environments, and challenging interpersonal situations are common for nurses in acute adult mental health services. Occupational stressors include verbal aggression and physical assault and are correlated with poor physical and mental health outcomes for nurses. There is a clear need for proactive approaches that address the negative impacts of stressors on the mental health nursing workforce. Resilience interventions are a preventive approach to strengthening skills for addressing workplace stress, improving health and well-being, and preventing adverse outcomes associated with occupational stressors. The aim of this study was to evaluate the feasibility of a workplace resilience education programme for nurses in high-acuity adult mental health settings. The outcomes were measured using a single-group pretest post-test design with follow-up at 3 months postintervention. The feasibility and acceptability of the programme were identified with descriptors of mental health, well-being, resilience, facilitator fidelity checklists, and participant satisfaction questionnaires. The programme was found to be feasible for nurses working in high-acuity inpatient settings. There were significant changes to mental health, well-being, and workplace resilience. The programme was delivered with fidelity by facilitators and accepted with high levels of satisfaction by participants. The study findings indicated that nurses can benefit from resilience education that equips them with cognitive, emotion regulation, and relational skills, in conjunction with available external supports and resources, to address workplace challenges. There is a need for comprehensive organizational approaches that include individual, work unit, and organizational-level strategies to support staff well-being. © 2018 Australian College of Mental Health Nurses Inc.

  19. Feasibility study of tank leakage mitigation using subsurface barriers. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Treat, R.L.; Peters, B.B.; Cameron, R.J. [Enserch Environmental, Inc., Richland, WA (United States)] [and others

    1995-01-01

    This document reflects the evaluations and analyses performed in response to Tri-Party Agreement Milestone M-45-07A - {open_quotes}Complete Evaluation of Subsurface Barrier Feasibility{close_quotes} (September 1994). In addition, this feasibility study was revised reflecting ongoing work supporting a pending decision by the DOE Richland Operations Office, the Washington State Department of Ecology, and the US Environmental Protection Agency regarding further development of subsurface barrier options for SSTs and whether to proceed with demonstration plans at the Hanford Site (Tri-Party Agreement Milestone M-45-07B). Analyses of 14 integrated SST tank farm remediation alternatives were conducted in response to the three stated objectives of Tri-Party Agreement Milestone M-45-07A. The alternatives include eight with subsurface barriers and six without. Technologies used in the alternatives include three types of tank waste retrieval, seven types of subsurface barriers, a method of stabilizing the void space of emptied tanks, two types of in situ soil flushing, one type of surface barrier, and a clean-closure method. A no-action alternative and a surface-barrier-only alternative were included as nonviable alternatives for comparison. All other alternatives were designed to result in closure of SST tank farms as landfills or in clean-closure. Revision 1 incorporates additional analyses of worker safety, large leak scenarios, and sensitivity to the leach rates of risk controlling constituents. The additional analyses were conducted to support TPA Milestone M-45-07B.

  20. Final focus system tuning studies towards Compact Linear Collider feasibility

    Directory of Open Access Journals (Sweden)

    E. Marin

    2018-01-01

    Full Text Available In this paper we present the latest results regarding the tuning study of the baseline design of the final focus system of the Compact Linear Collider (CLIC-FFS. CLIC aims to provide collisions to the experiments at a luminosity above 10^{34}  cm^{-2} s^{-1}. In order to deliver such luminosity in a single pass machine, the vertical beam size at the interaction point (IP is reduced to about 1 nm, which imposes unprecedented tuning difficulties to the system. In previous studies, 90% of the machines reached 90% of the nominal luminosity at the expense of 18 000 luminosity measurements, when considering beam position monitor errors and transverse misalignments of magnets for a single beam case. In the present study, additional static imperfections such as roll misalignments and strength errors are included. Moreover both e^{-} and e^{+} beamlines are properly simulated. A new tuning procedure based on linear and nonlinear knobs is implemented to effectively cure the most relevant beam size aberrations at the IP. The obtained results for single and double beam studies under solely static imperfections are presented.

  1. Final focus system tuning studies towards Compact Linear Collider feasibility

    Science.gov (United States)

    Marin, E.; Latina, A.; Tomás, R.; Schulte, D.

    2018-01-01

    In this paper we present the latest results regarding the tuning study of the baseline design of the final focus system of the Compact Linear Collider (CLIC-FFS). CLIC aims to provide collisions to the experiments at a luminosity above 1034 c m-2 s-1 . In order to deliver such luminosity in a single pass machine, the vertical beam size at the interaction point (IP) is reduced to about 1 nm, which imposes unprecedented tuning difficulties to the system. In previous studies, 90% of the machines reached 90% of the nominal luminosity at the expense of 18 000 luminosity measurements, when considering beam position monitor errors and transverse misalignments of magnets for a single beam case. In the present study, additional static imperfections as, roll misalignments, strength v2.epss are included. Moreover both e- and e+ beamlines are properly simulated. A new tuning procedure based on linear and nonlinear knobs is implemented to effectively cure the most relevant beam size aberrations at the IP. The obtained results for single and double beam studies under solely static imperfections are presented.

  2. Oak Ridge Health Studies Phase 1 report, Volume 2: Part A, Dose Reconstruction Feasibility Study

    International Nuclear Information System (INIS)

    Bruce, G.M.; Buddenbaum, J.E.; Lamb, J.K.; Widner, T.E.

    1993-09-01

    The Phase I feasibility study has focused on determining the availability of information for estimating exposures of the public to chemicals and radionuclides released as a result of historical operation of the facilities at the Oak Ridge Reservation (ORR). The estimation of such past exposures is frequently called dose reconstruction. The initial project tasks, Tasks 1 and 2 were designed to identify and collect information that documents the history of activities at the ORR that resulted in the release of contamination and to characterize the availability of data that could be used to estimate the magnitude of the contaminant releases or public exposures. A history of operations that are likely to have generated off-site releases has been documented as a result of Task 1 activities. The activities required to perform this task involved the extensive review of historical operation records and interviews with present and past employees as well as other knowledgeable individuals. The investigation process is documented in this report. The Task 1 investigations have led to the documentation of an overview of the activities that have taken place at each of the major complexes, including routine operations, waste management practices, special projects, and accidents and incidents. Historical activities that appear to warrant the highest priority in any further investigations were identified based on their likely association with off-site emissions of hazardous materials as indicated by the documentation reviewed or information obtained in interviews

  3. Regional feasibility study of integrated mobility systems (IMS) in the Greater Toronto Area

    Energy Technology Data Exchange (ETDEWEB)

    Miller, E.J.; Roorda, M.J. [Toronto Univ., ON (Canada); Litman, T. [Victoria Transport Policy Inst., Victoria, BC (Canada); Plant, T. [Mississauga Transit, ON (Canada); Zorzi, K. [Moving the Economy, Toronto, ON (Canada)

    2003-01-01

    There are several institutional and operational challenges that must be overcome for the successful application of a Greater Toronto Area (GTA) smart card system for accessing mass transit. A study was initiated in September 2001 which involved the development of work packages in partnership with the City of Mississauga, GO Transit, the Toronto Transit Commission, and Burlington Transit. The GTA Fare System Group was formed to develop an Operational Concept for a GTA Farecard. This paper presents an assemblage of the work packages and includes input from transit and transportation agencies, consulting firms and research institutions. The paper was divided into the following five sections: (1) background to integrated mobility systems, study area and need, and intended audience, (2) goals and objectives of the feasibility study, as well as its central vision, (3) outline of the participants in the feasibility study and other relevant studies, (4) summary of the key findings in the three supporting reports, and (5) the implications of the findings. 2 tabs.

  4. A feasibility study of UMTS mobile phones for supporting nurses doing home visits to patients with diabetic foot ulcers

    DEFF Research Database (Denmark)

    Larsen, Simon Bo; Clemensen, Jane; Ejskjær, Niels

    2006-01-01

    We tested the feasibility of Universal Mobile Telephone System (UMTS) mobile phones for video consultations in the home. Five patients with diabetic foot ulcers were included in the study. Each of them was offered three video consultations instead of visits to the hospital outpatient clinic...

  5. Feasibility study of Transcutaneous Electrical Nerve Stimulation (TENS) for cancer bone pain.

    Science.gov (United States)

    Bennett, Michael I; Johnson, Mark I; Brown, Sarah R; Radford, Helen; Brown, Julia M; Searle, Robert D

    2010-04-01

    This multicenter study assessed the feasibility of conducting a phase III trial of transcutaneous electrical nerve stimulation (TENS) in patients with cancer bone pain recruited from palliative care services. Eligible patients received active and placebo TENS for 1 hour at site of pain in a randomized crossover design; median interval between applications 3 days. Responses assessed at 30 and 60 minutes included numerical and verbal ratings of pain at rest and on movement, and pain relief. Recruitment, tolerability, adverse events, and effectiveness of blinding were also evaluated. Twenty-four patients were randomised and 19 completed both applications. The intervention was well tolerated. Five patients withdrew: 3 due to deteriorating performance status, and 2 due to increased pain (1 each following active and placebo TENS). Confidence interval estimation around the differences in outcomes between active and placebo TENS suggests that TENS has the potential to decrease pain on movement more than pain on rest. Nine patients did not consider that a placebo was used; the remaining 10 correctly identified placebo TENS. Feasibility studies are important in palliative care prior to undertaking clinical trials. Our findings suggest that further work is required on recruitment strategies and refining the control arm before evaluating TENS in cancer bone pain. Cancer bone pain is common and severe, and partly mediated by hyperexcitability. Animal studies suggest that Transcutaneous Electrical Nerve Stimulation can reduce hyperalgesia. This study examined the feasibility of evaluating TENS in patients with cancer bone pain in order to optimize methods before a phase III trial. Copyright 2010 American Pain Society. Published by Elsevier Inc. All rights reserved.

  6. Feasibility study for bottled gas and LPG in Poland

    International Nuclear Information System (INIS)

    1992-04-01

    With a total population of ca. 40 million, Poland has an annual consumption of liquefied petroleum gas amounting to 180,000 tons, used by 2.5 million bottled-gas consumers. The consumer pattern is expected to change, with an increasing market for gas for industrial purposes and for heating. Distribution systems will also change to include tank installations in many sizes and transport with large tank lorries. LPG is estimated to be competitive with other forms of energy, and the market is expected to increase to up to ca. 500,000 tons per year. Restricting factors are shortage of supply and lack of approved applications, transport equipment and tank facilities. A list of existing bottle gas companies and evaluation of the technical facilities in the Polish Oil and Gas Company in Gydnia are included. Bottled gas is currently distributed under normal conditions and, market prices for LPG have remained stable in Poland. Detailed studies of the current distribution network in the Suwalki area are given. It should be possible to extend the existing distribution network. A proposal for the establishment of standard tank installations and the gas supply for the town of Augustow is presented. Considerable investments will have to be made in terminals, tank plants and transport equipment, and international oil companies are expected to play an important role in this market. The European Bank for Restructuring and Development could possibly contribute to the financing of the pipe network. (AB)

  7. Developing and Implementing a Community-Based Model of Care for Fibromyalgia: A Feasibility Study

    Directory of Open Access Journals (Sweden)

    Michelle Teo

    2017-01-01

    Full Text Available Background. Fibromyalgia (FM is a complex disease posing challenges for primary care providers and specialists in its management. Aim. To evaluate the development and implementation of a comprehensive, integrated, community-based model of care for FM. Methods. A mixed methods feasibility study was completed in a small urban centre in southern British Columbia, Canada. Eleven adults with FM and a team of seven health care providers (HCPs participated in a 10-week intervention involving education, exercise, and sleep management. Monthly “team-huddle” sessions with HCPs facilitated the integration of care. Data included health questionnaires, patient interviews, provider focus group/interviews, and provider surveys. Results. Both patients and HCPs valued the interprofessional team approach to care. Other key aspects included the benefits of the group, exercise, and the positive focus of the program. Effectiveness of the model showed promising results: quality of care for chronic illness, quality of life, and sleep showed significant (P<0.05 differences from baseline to follow-up. Conclusions. Our community-based model of care for FM was successfully implemented. Further testing of the model will be required with a larger sample to determine its effectiveness, although promising results were apparent in our feasibility study.

  8. Structured narrative retell instruction for young children from low socioeconomic backgrounds: a preliminary study of feasibility.

    Science.gov (United States)

    Adlof, Suzanne M; McLeod, Angela N; Leftwich, Brianne

    2014-01-01

    Successful acquisition of literacy depends on adequate development of decoding skills as well as broader, meaning-related knowledge and skills for text comprehension. Children from low socioeconomic status (SES) backgrounds are often challenged in both domains, relative to peers who are not economically disadvantaged. The efficacy of code-focused instructional programs for at-risk preliterate children is well supported, but less evidence is available regarding interventions to improve broader language and comprehension skills. This preliminary study tested the feasibility of a new intervention, "structured narrative retell instruction" (SNRI), and explored its potential to enhance meaning-related knowledge and skills, including vocabulary, listening comprehension, and narrative skills, in pre-literate, low SES children. SNRI used authentic children's books to model comprehension processes, explicitly teach story grammar, and implicitly target microstructural aspects of narratives. Participants included 9 children with a mean age of 60 months, who were randomly assigned to SNRI or to code-focused literacy instruction (CFLI). Each group received 12, 40-min instructional sessions over 6 weeks. Pre- and post-tests were administered to assess vocabulary, listening comprehension, narrative macrostructure and narrative microstructure, as well as alphabet knowledge, phonological awareness, and concepts of print. The feasibility of SNRI was demonstrated by completion of the designed study, moderately high treatment fidelity, and qualitative feedback from interventionists. The SNRI group also made significant gains on 4 of the 7 meaning-related measures (p improving language skills related to comprehension and that further research investigating its efficacy is warranted.

  9. Feasibility Study of Cargo Airship Transportation Systems Powered by New Green Energy Technologies

    Science.gov (United States)

    Skuza, Jonathan R.; Park, Yeonjoon; Kim, Hyun Jung; Seaman, Shane T.; King, Glen C.; Choi, Sang H.; Song, Kyo D.; Yoon, Hargsoon; Lee, Kunik

    2014-01-01

    The development of transportation systems that use new and sustainable energy technologies is of utmost importance due to the possible future shortfalls that current transportation modes will encounter because of increased volume and costs. The introduction and further research and development of new transportation and energy systems by materials researchers at the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) and the Department of Transportation are discussed in this Technical Memorandum. In this preliminary study, airship concepts were assessed for cargo transportation using various green energy technologies capable of 24-hour operation (i.e., night and day). Two prototype airships were successfully constructed and tested at LaRC to demonstrate their feasibility: one with commercially available solar cells for operation during the daytime and one with microwave rectennas (i.e., rectifying antennas) developed in-house for night-time operation. The test results indicate the feasibility of a cargo transportation airship powered by new green energy sources and wireless power technology. Future applications will exploit new green energy sources that use materials and devices recently developed or are in the process of being developed at LaRC. These include quantum well SiGe solar cells; low, mid-, and high temperature thermoelectric modules; and wireless microwave and optical rectenna devices. This study examines the need and development of new energy sources for transportation, including the current status of research, materials, and potential applications.

  10. Environmental process improvement feasibility study and demonstration program

    Science.gov (United States)

    Martin, Rodger L.

    1994-01-01

    This report is the final product of an environmental study conducted by Western Commercial Space Center, Inc. under contract to Tennessee-Calspan Center for Space Transportation and Applied Research. The purpose of this investigation is to accurately document the current environmental and permitting processes associated with commercial space launch activity at Vandenberg AFB, and make recommendations to streamline those processes. The particular areas of interest focus on: identifying applicable Federal, state, and local laws, Department of Defense directives, and Air force regulations; defining the environmental process on Vandenberg AFB and how it relates with other agencies, including Federal and state regulatory agencies; and defining the air quality permit process. Study investigation results are applied to an example Pilot Space Launch Vehicle (PSLV) planning to launch from Vandenberg AFB. The PSLV space hardware is analyzed with respect to environmental and permitting issues associated with vehicle processing, facilities required (existing or new), and launch. The PSLV verified the earlier findings of the study and gave insight into streamlining recommendations.

  11. Out-of-bed extubation: a feasibility study

    Science.gov (United States)

    Dexheimer Neto, Felippe Leopoldo; Vesz, Patrini Silveira; Cremonese, Rafael Viegas; Leães, Clarissa Garcia Soares; Raupp, Ana Carolina Tabajara; Rodrigues, Cristiano dos Santos; de Andrade, Juliana Mara Stormovski; Townsend, Raquel da Silva; Maccari, Juçara Gasparetto; Teixeira, Cassiano

    2014-01-01

    Objective In clinical intensive care practice, weaning from mechanical ventilation is accompanied by concurrent early patient mobilization. The aim of this study was to compare the success of extubation performed with patients seated in an armchair compared to extubation with patients in a supine position. Methods A retrospective study, observational and non-randomized was conducted in a mixed-gender, 23-bed intensive care unit. The primary study outcome was success of extubation, which was defined as the patient tolerating the removal of the endotracheal tube for at least 48 hours. The differences between the study groups were assessed using Student's t-test and chi-squared analysis. Results Ninety-one patients were included from December 2010 and June 2011. The study population had a mean age of 71 years ± 12 months, a mean APACHE II score of 21±7.6, and a mean length of mechanical ventilation of 2.6±2 days. Extubation was performed in 33 patients who were seated in an armchair (36%) and in 58 patients in a supine position (64%). There were no significant differences in age, mean APACHE II score or length of mechanical ventilation between the two groups, and a similar extubation success rate was observed (82%, seated group versus 85%, supine group, p>0.05). Furthermore, no significant differences were found between the two groups in terms of post-extubation distress, need for tracheostomy, duration of mechanical ventilation weaning, or intensive care unit stay. Conclusion Our results suggest that the clinical outcomes of patients extubated in a seated position are similar to those of patients extubated in a supine position. This new practice of seated extubation was not associated with adverse events and allowed extubation to occur simultaneously with early mobilization. PMID:25295820

  12. Feasibility studies for high pressure neutron powder diffraction experiments

    International Nuclear Information System (INIS)

    Von Dreele, R.B.

    1991-01-01

    We recently performed two neutron powder diffraction experiments on very small samples on the High Intensity Powder Diffractometer (HIPD), to determine the feasibility of performing in situ high pressure/high temperature neutron diffraction experiments on HIPD at pressures which would exceed the previous limit of ∼50kbar achievable in a neutron diffraction experiment. The sample, which had been prepared at 65kbar and 1000degC, consisted of a small platinum capsule filled with CaGeO 3 perovskite. A diffraction experiment taking ∼8.6hrs at a LANSCE proton beam current of ∼53μA gave peaks of good intensity from both Pt and CaGeO 3 ; we could begin to see them after only 20min if beam time. The second experiment was to test the possibility of diffraction from a high pressure apparatus. We placed in the HIPD sample position the central assembly from a 100kbar octahedral press. Four tungsten carbide anvils and a copper block previously pressed to 65kbar were held in an aluminum frame. The sample consisted of a small bit of nickel foil placed in a 3 mm hole in the copper block. The active sample volume is defined by the gap (∼0.7mm) between the anvils and the length of the sample. A small portion of the copper block is also seen in this arrangement. This is viewed at 90deg 2Θ through a similar gap between the anvils by 4 1/2''x12'' 3 He counter tubes. This arrangement simulates the operating conditions of a high pressure run at 100kbar and takes advantage of the fixed instrument geometry possible in time-of-flight neutron diffraction experiments. We obtained a diffraction pattern in ∼7.1hrs and ∼57μA beam current which clearly showed peaks from both copper and nickel with no evidence of diffraction from the anvils or any other part of the assembly. These two experiments clearly demonstrate the feasibility of performing high pressure in situ diffraction experiments in excess of 100kbar on HIPD at LANSCE. (J.P.N.)

  13. A feasibility study on a wind energy investment fund

    International Nuclear Information System (INIS)

    Mitchell, R.; Vassall-Adams, G.; Lynch, M.; Coates, S.; Willcox, S.

    1994-01-01

    This study seeks to overcome an obstacle to greater use of wind energy in Britain - the difficulties experienced by developers of small wind farms in raising finance for their projects. This need for capital has provided the impetus for this investigation into the possibility of wind funds, which would enable investors to invest in wind energy and provide developers of small wind farms with the financial backing they need. The contents of this report reflect the issues which would be of interest to an organisation wishing to establish a wind fund. These include the environmental concerns which have spurred the development of sustainable energy technologies, the role of government in establishing the framework for wind energy generation in Britain and public concern about the impact of wind farms. (author)

  14. Feasibility study and concepts for use of compact process units to treat Hanford tank wastes

    International Nuclear Information System (INIS)

    Collins, E.D.; Bond, W.D.; Campbell, D.O.; Harrington, F.E.; Malkemus, D.W.; Peishel, F.L.; Yarbro, O.O.

    1994-06-01

    A team of experienced radiochemical design engineers and chemists was assembled at Oak Ridge National Laboratory (ORNL) at the request of the Underground Storage Tank Integrated Demonstration (USTID) Program to evaluate the feasibility and perform a conceptual study of options for the use of compact processing units (CPUs), located at the Hanford, Washington, waste tank sites, to accomplish extensive pretreatment of the tank wastes using the clean-option concept. The scope of the ORNL study included an evaluation of the constraints of the various chemical process operations that may be employed and the constraints of necessary supporting operations. The latter include equipment maintenance and replacement, process control methods, product and by-product storage, and waste disposal

  15. Feasibility study and concepts for use of compact process units to treat Hanford tank wastes

    Energy Technology Data Exchange (ETDEWEB)

    Collins, E.D.; Bond, W.D.; Campbell, D.O.; Harrington, F.E.; Malkemus, D.W.; Peishel, F.L.; Yarbro, O.O.

    1994-06-01

    A team of experienced radiochemical design engineers and chemists was assembled at Oak Ridge National Laboratory (ORNL) at the request of the Underground Storage Tank Integrated Demonstration (USTID) Program to evaluate the feasibility and perform a conceptual study of options for the use of compact processing units (CPUs), located at the Hanford, Washington, waste tank sites, to accomplish extensive pretreatment of the tank wastes using the clean-option concept. The scope of the ORNL study included an evaluation of the constraints of the various chemical process operations that may be employed and the constraints of necessary supporting operations. The latter include equipment maintenance and replacement, process control methods, product and by-product storage, and waste disposal.

  16. Renewable Energy Development on Fort Mojave Reservation Feasiblity Study

    Energy Technology Data Exchange (ETDEWEB)

    Russell Gum, ERCC analytics LLC

    2008-03-17

    The Ft. Mojave tribe, whose reservation is located along the Colorado River in the states of Arizona, California, and Nevada near the point where all three states meet, has a need for increased energy supplies. This need is a direct result of the aggressive and successful economic development projects undertaken by the tribe in the last decade. While it is possible to contract for additional energy supplies from fossil fuel sources it was the desire of the tribal power company, AHA MACAV Power Service (AMPS) to investigate the feasibility and desirability of producing power from renewable sources as an alternative to increased purchase of fossil fuel generated power and as a possible enterprise to export green power. Renewable energy generated on the reservation would serve to reduce the energy dependence of the tribal enterprises on off reservation sources of energy and if produced in excess of reservation needs, add a new enterprise to the current mix of economic activities on the reservation. Renewable energy development would also demonstrate the tribe’s support for improving environmental quality, sustainability, and energy independence both on the reservation and for the larger community.

  17. Adaptive radiotherapy for invasive bladder cancer: A feasibility study

    International Nuclear Information System (INIS)

    Pos, Floris J.; Hulshof, Maarten; Lebesque, Joos; Lotz, Heidi; Tienhoven, Geertjan van; Moonen, Luc; Remeijer, Peter

    2006-01-01

    Purpose: To evaluate the feasibility of adaptive radiotherapy (ART) in combination with a partial bladder irradiation. Methods and Materials: Twenty-one patients with solitary T1-T4 N0M0 bladder cancer were treated to the bladder tumor + 2 cm margin planning target volume (PTV CONV ). During the first treatment week, five daily computed tomography (CT) scans were made immediately before or after treatment. In the second week, a volume was constructed encompassing the gross tumor volumes (GTVs) on the planning scan and the five CT scans (GTV ART ). The GTV ART was expanded with a 1 cm margin for the construction of a PTV ART . Starting in the third week, patients were treated to PTV ART . Repeat CT scans were used to evaluate treatment accuracy. Results: On 5 of 91 repeat CT scans (5%), the GTV was not adequately covered by the PTV ART . On treatment planning, there was only one scan in which the GTV was not adequately covered by the 95% isodose. On average, the treatment volumes were reduced by 40% when comparing PTV ART with PTV CONV (p < 0.0001). Conclusion: The adaptive strategy for bladder cancer is an effective way to deal with treatment errors caused by variations in bladder tumor position and leads to a substantial reduction in treatment volumes

  18. Feasibility study of SMART core with soluble boron

    International Nuclear Information System (INIS)

    Kim, Kang Seog; Lee, Chung Chan; Zee, Sung Quun

    2000-11-01

    The excess reactivity of SMART core without soluble boron is effectively controlled by 49 CEDM. We suggest another method to control the core excess reactivity using both the checkerboard type of 25 CEDM and soluble boron and perform a feasibility calculation. The soluble boron operation is categorized into the on-line and the off-line mechanisms. The former is to successively control the boron concentration according to the excess reactivity during operation and the latter is to add and change some soluble boron during refueling and repairing. Since the on-line soluble boron control system of SMART is conceptually identical to that of the commercial pressurized water reactor, we did not perform the analysis. Since the soluble boron in the complete off-line system increases the moderator temperature coefficient, the reactivity defect between hot and cold moderator temperature is decreased. However, the decrease of the reactivity is not big to satisfy the core reactivity limits. When using 25 CEDM, the possible mechanism is to control the excess reactivity by both control rod and on-line boron control mechanism between cold and hot zero power and by only control rod at hot full power. We selected the loading pattern satisfying the requirement in the view of nuclear design

  19. Privatization and the allure of franchising: a Zambian feasibility study.

    Science.gov (United States)

    Fiedler, John L; Wight, Jonathan B

    2003-01-01

    Efforts to privatize portions of the health sector have proven more difficult to implement than had been anticipated previously. One common bottleneck encountered has been the traditional organizational structure of the private sector, with its plethora of independent, single physician practices. The atomistic nature of the sector has rendered many privatization efforts difficult, slow and costly-in terms of both organizational development and administration. In many parts of Africa, in particular, the shortages of human and social capital, and the fragile nature of legal institutions, undermine the appeal of privatization. The private sector is left with inefficiencies, high prices and costs, and a reduced effective demand. The result is the simultaneous existence of excess capacity and unmet need. One potential method to improve the efficiency of the private sector, and thereby enhance the likelihood of successful privatization, is to transfer managerial technology--via franchising--from models that have proven successful elsewhere. This paper presents a feasibility analysis of franchizing the successful Bolivian PROSALUD system's management package to Zambia. The assessment, based on PROSALUD's financial model, demonstrates that technology transfer requires careful adaptation to local conditions and, in this instance, would still require significant external assistance.

  20. Gaining information about home visits in primary care: methodological issues from a feasibility study.

    Science.gov (United States)

    Voigt, Karen; Taché, Stephanie; Klement, Andreas; Fankhaenel, Thomas; Bojanowski, Stefan; Bergmann, Antje

    2014-05-06

    Home visits are part of general practice work in Germany. Within the context of an expanding elderly population and a decreasing number of general practitioner (GPs), open questions regarding the organisation and adequacy of GPs' care in immobile patients remain. To answer these questions, we will conduct a representative primary data collection concerning contents and organisation of GPs' home visits in 2014. Because this study will require considerable efforts for documentation and thus substantial involvement by participating GPs, we conducted a pilot study to see whether such a study design was feasible. We used a mixed methods design with two study arms in a sample of teaching GPs of the University Halle. The quantitative arm evaluates participating GPs and documentation of home visits. The qualitative arm focuses on reasons for non-participation for GPs who declined to take part in the pilot study. Our study confirms previously observed reasons for non-response of GPs in the particular setting of home visits including lack of time and/or interest. In contrast to previous findings, monetary incentives were not crucial for GPs participation. Several factors influenced the documentation rate of home visits and resulted in a discrepancy between the numbers of home visits documented versus those actually conducted. The most frequently reported problem was related to obtaining patient consent, especially when patients were unable to provide informed consent due to cognitive deficits. The results of our feasibility study provide evidence for improvement of the study design and study instruments to effectively conduct a documentation-intensive study of GPs doing home visits. Improvement of instructions and questionnaire regarding time variables and assessment of the need for home visits will be carried out to increase the reliability of future data. One particularly important methodological issue yet to be resolved is how to increase the representativeness of home

  1. Feasibility study on co-processing technology; Co-processing gijutsu no kigyoka kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Co-processing is a technology producing light oil by hydrocracking of mixtures of coal and heavy oils (tar sand bitumen, heavy oil) as rich resources. The feasibility study on co-processing technology was carried out to improve its profitability and promote its practical use. The United States DOE is promoting the co-processing program to enhance reaction rates through utilization of modified catalysts and optimization of the first and second stage temperatures, and to perform catalyst activity screening including new high- activity ebullated-bed catalysts, dispersed catalysts, extrusion molded catalysts, and combinations of them. DOE is also promoting the study on the reactant/product of coal- derived liquid and/or petroleum derived residues, improvement of a liquid yield and product quality in a two-stage reactor, and optimization of the co-processing system by interstage hydrotreating. Two test results showed higher effectiveness than previous ones. In addition, the possibility of the co-processing system was studied by autoclave test of coal/oil sand bitumen. Its feasibility in China was also studied. 44 figs., 31 tabs.

  2. White phosphorus pits focused feasibility study final July 2007.

    Energy Technology Data Exchange (ETDEWEB)

    Davis, B.; Martino, L.

    2007-08-21

    The White Phosphorus Burning Pits (WPP) Area of Concern (AOC) is a site of about 5.5 acres (2.2 ha) located in the J-Field Study Area, in the Edgewood Area of Aberdeen Proving Ground (APG), Maryland (Figure 1.1). Considerable information about the WPP exists as a result of efforts to characterize the hazards associated with J-Field. Contamination in the J-Field Study Area was first detected during an environmental survey of the APG Edgewood Area conducted in 1977 and 1978 (Nemeth et al. 1983) by the U.S. Army Toxic and Hazardous Materials Agency (USATHAMA; predecessor to the U.S. Army Environmental Center). As part of a subsequent USATHAMA environmental survey, 11 wells were installed and sampled at J-Field (three of them at the WPP) (Nemeth 1989). Contamination was also detected in 1983 during a munitions disposal survey conducted by Princeton Aqua Science (1984). The Princeton Aqua Science investigation involved installing and sampling nine wells (four at the WPP) and collecting and analyzing surficial and deep composite soil samples (including samples from the WPP area). In 1986, the U.S. Environmental Protection Agency (EPA) issued a Resource Conservation and Recovery Act (RCRA) Permit (MD3-21-002-1355) requiring a post-wide RCRA Facility Assessment (RFA) and a hydrogeologic assessment of J-Field. In 1987, the U.S. Geological Survey (USGS) began a two-phase hydrogeologic assessment in which data were collected to model groundwater flow at J-Field. Soil-gas investigations were conducted, several well clusters were installed (four at the WPP), a groundwater flow model was developed, and groundwater and surface water monitoring programs were established that continue today. The results of the USGS study were published by Hughes (1993).

  3. Greater occipital nerve infiltration under MR guidance. Feasibility study and preliminary results

    International Nuclear Information System (INIS)

    Kastler, Adrian; Perolat, Romain; Kastler, Bruno; Maindet-Dominici, Caroline; Fritz, Jan; Benabid, Alim Louis; Chabardes, Stephan; Krainik, Alexandre

    2018-01-01

    To assess the feasibility of greater occipital nerve (GON) intermediate site infiltration with MRI guidance. Eleven consecutive patients suffering from chronic refractory cranio-facial pain who underwent 16 GON infiltrations were included in this prospective study. All of the procedures were performed on an outpatient basis in the research facility of our institution, with a 1.5 T scanner. The fatty space between inferior obliquus and semispinalis muscles at C1-C2 level was defined as the target. Technical success was defined as the ability to accurately inject the products at the target, assessed by post-procedure axial and sagittal proton density-weighted sequences. Clinical success was defined as a 50% pain decrease at 1 month. Technical success was 100%. GON was depicted in 6/11 cases on planning MRI sequences. Mean duration of procedure was 22.5 min (range 16-41). Clinical success was obtained in 7/11 included patients (63.6%) with a mean self-reported improvement of 78%. Interventional MR-guidance for GON infiltration is a feasible technique offering similar results to an already established effective procedure. It may appear as a useful tool in specific populations, such as young patients and repeat infiltrations, and should be considered in these settings. (orig.)

  4. A feasibility study of thyroid cancer among patients treated with I-131

    International Nuclear Information System (INIS)

    Anderson, T.W.

    1984-04-01

    This study examined the feasibility of conducting a Canada-wide follow-up study of persons receiving I-131 before 1970, to see if current estimates of induction of thyroid cancer are well founded. It is concluded that such a study is not feasible due to the widespread destruction of old records, and the limited quantity of personal identifying information on those records that do still exist

  5. Recent progress in the feasibility study for the first nuclear power plant in Indonesia

    International Nuclear Information System (INIS)

    Adiwardojo

    1997-01-01

    The energy consumption in Indonesia has been continually increasing since 1970 at an average rate of ∼ 10.6%/year. Specifically, for the island of Java, which consumes ∼ 80% of Indonesia's electricity, the installed capacity by PLN was 6363MW in 1990/91. This has increased by ∼ 17%/year during the past three years. Additional increase in electrical consumption of the Java-Bali system projects the need for the installed capacity to reach 31,845 MW in 2003/04. In anticipation of this major addition of installed capacity, the government of Indonesia is conducting feasibility studies of the nuclear option as a means of filling the projected deficit or gap where other fuel options are likely to reach their limits. This paper describes the scope of the present feasibility study including energy economics and financing, technical and safety aspects, the fuel cycle and waste management, general management, and site and environmental studies. (author). 4 refs, 1 fig., 4 tabs

  6. Feasibility of trauma-focused cognitive behavioral therapy for traumatized children in Japan: a Pilot Study.

    Science.gov (United States)

    Kameoka, Satomi; Yagi, Junko; Arai, Yoko; Nosaka, Sachiko; Saito, Azusa; Miyake, Wakako; Takada, Saeko; Yamamoto, Sayaka; Asano, Yasuko; Tanaka, Eizaburo; Asukai, Nozomu

    2015-01-01

    Trauma-focused cognitive behavioral therapy is used to treat children who have experienced traumatic events and suffer from trauma-related disorders. Its effectiveness has been demonstrated in several randomized controlled studies. However, most of these studies have been performed in the United States, with few studies conducted in Asian countries. Therefore, we aimed to evaluate the feasibility of trauma-focused cognitive behavioral therapy in children who have experienced traumatic events and who suffer from trauma-related disorders in Japan. Thirty-five traumatized children (mean age = 10.9 years; range = 3-17 years; 74.3% girls) who received trauma-focused cognitive behavioral therapy were included. The effectiveness of the program was evaluated in each case using the University of California at Los Angeles Post-Traumatic Stress Disorder Reaction Index for DSM-IV for trauma-related symptoms and the Children's Global Assessment Scale for social functioning. Pre- and post-treatment outcome measures were analyzed using two-tailed paired t tests. The results for 35 participants indicate that post-traumatic stress symptoms were significantly improved following therapy [t(35) = 8.27; p cognitive behavioral therapy is feasible for treating traumatized children of an Asian population. We discuss the implications of this result for clinical practice and future research.

  7. Remedial Action Assessment System: A computer-based methodology for conducting feasibility studies

    International Nuclear Information System (INIS)

    White, M.K.; Buelt, J.L.; Stottlemyre, J.A.

    1991-02-01

    Because of the complexity and number of potential waste sites facing the US Department of Energy (DOE) for potential cleanup, DOE is supporting the development of a computer-based methodology to streamline the remedial investigation/feasibility study process. The Remedial Action Assessment System (RAAS), can be used for screening, linking, and evaluating established technology processes in support of conducting feasibility studies. It is also intended to do the same in support of corrective measures studies. The user interface employs menus, windows, help features, and graphical information while RAAS is in operation. Object-oriented programming is used to link unit processes into sets of compatible processes that form appropriate remedial alternatives. Once the remedial alternatives are formed, the RAAS methodology can evaluate them in terms of effectiveness, implementability, and cost. RAAS will access a user-selected risk assessment code to determine the reduction of risk after remedial action by each recommended alternative. The methodology will also help determine the implementability of the remedial alternatives at a site and access cost estimating tools to provide estimates of capital, operating, and maintenance costs. This paper presents the characteristics of two RAAS prototypes currently being developed. These include the RAAS Technology Information System, which accesses graphical, tabular and textual information about technologies, and the main RAAS methodology, which screens, links, and evaluates remedial technologies. 4 refs., 3 figs., 1 tab

  8. Client-centred self-care intervention after stroke: a feasibility study.

    Science.gov (United States)

    Guidetti, Susanne; Andersson, Karin; Andersson, Magnus; Tham, Kerstin; Von Koch, Lena

    2010-12-01

    The aim of the study was to evaluate the effect of client-centred, self-care intervention (CCSCI) on (i) activities of daily living (ADL) and life satisfaction in persons with stroke, (ii) caregiver burden, use of informal care and home-help services, and (iii) the feasibility of the study design. Randomized controlled trial, a pilot study of an intervention group (IG) receiving CCSCI or a control group (CG) receiving ordinary training. Forty persons with stroke (IG n = 19, CG n = 21) were included: non-demented, able to follow instructions, dependent regarding self-care and referred for rehabilitation, and their significant others (IG n = 8, CG n = 8). Data were collected at baseline and three months later using established instruments regarding ADL, life satisfaction, caregiver burden, and use of health services from medical records, the county register, and by interviews. There were no differences in ADL, life satisfaction, caregiver burden, or use of services at three months. Both groups improved significantly and clinically important improvements were achieved by 86% in IG and 63% in CG. The CCSCI appears promising for the recapturing of self-care after stroke and a large randomized controlled trial is warranted, in which the present design and methods with some modification will be feasible.

  9. Carbon dioxide coronary angiography: A mechanical feasibility study with a cardiovascular simulator

    Directory of Open Access Journals (Sweden)

    Ivan Corazza

    2018-01-01

    Full Text Available The aim of this study was to carry out a bench evaluation of the biomechanical feasibility of carbon dioxide (CO2 coronary arteriography. Many patients among the aging population of individuals requiring cardiac intervention have underlying renal insufficiency making them susceptible to contrast-induced nephropathy. To include those patients, it is imperative to find an alternative and safe technique to perform coronary imaging on cardiac ischemic patients. As CO2 angiography has no renal toxicity, it may be a possible solution offering good imaging with negligible collateral effects. Theoretically, by carefully controlling the gas injection process, new automatic injectors may avoid gas reflux into the aorta and possible cerebral damage. A feasibility study is mandatory. A mechanical mock of the coronary circulation was developed and employed. CO2 was injected into the coronary ostium with 2 catheters (2F and 6F and optical images of bubbles flowing inside the vessels at different injection pressures were recorded. The gas behavior was then carefully studied for quantitative and qualitative analysis. Video recordings showed that CO2 injection at a precise pressure in the interval between the arterial dicrotic notch and the minimum diastolic value does not result in gas reflow into the aorta. Gas reflow was easier to control with the smaller catheter, but the gas bubbles were smaller with different vascular filling. Our simulation demonstrates that carefully selected injection parameters allow CO2 coronary imaging without any risk of gas reflux into the aorta.

  10. Carbon dioxide coronary angiography: A mechanical feasibility study with a cardiovascular simulator

    Science.gov (United States)

    Corazza, Ivan; Taglieri, Nevio; Pirazzini, Edoardo; Rossi, Pier Luca; Lombi, Alessandro; Scalise, Filippo; Caridi, James G.; Zannoli, Romano

    2018-01-01

    The aim of this study was to carry out a bench evaluation of the biomechanical feasibility of carbon dioxide (CO2) coronary arteriography. Many patients among the aging population of individuals requiring cardiac intervention have underlying renal insufficiency making them susceptible to contrast-induced nephropathy. To include those patients, it is imperative to find an alternative and safe technique to perform coronary imaging on cardiac ischemic patients. As CO2 angiography has no renal toxicity, it may be a possible solution offering good imaging with negligible collateral effects. Theoretically, by carefully controlling the gas injection process, new automatic injectors may avoid gas reflux into the aorta and possible cerebral damage. A feasibility study is mandatory. A mechanical mock of the coronary circulation was developed and employed. CO2 was injected into the coronary ostium with 2 catheters (2F and 6F) and optical images of bubbles flowing inside the vessels at different injection pressures were recorded. The gas behavior was then carefully studied for quantitative and qualitative analysis. Video recordings showed that CO2 injection at a precise pressure in the interval between the arterial dicrotic notch and the minimum diastolic value does not result in gas reflow into the aorta. Gas reflow was easier to control with the smaller catheter, but the gas bubbles were smaller with different vascular filling. Our simulation demonstrates that carefully selected injection parameters allow CO2 coronary imaging without any risk of gas reflux into the aorta.

  11. Human Papilloma Virus (HPV) Oral Prevalence in Scotland (HOPSCOTCH): A Feasibility Study in Dental Settings.

    Science.gov (United States)

    Conway, David I; Robertson, Chris; Gray, Heather; Young, Linda; McDaid, Lisa M; Winter, Andrew J; Campbell, Christine; Pan, Jiafeng; Kavanagh, Kimberley; Kean, Sharon; Bhatia, Ramya; Cubie, Heather; Clarkson, Jan E; Bagg, Jeremy; Pollock, Kevin G; Cuschieri, Kate

    2016-01-01

    The purpose of this study was to test the feasibility of undertaking a full population investigation into the prevalence, incidence, and persistence of oral Human Papilloma Virus (HPV) in Scotland via dental settings. Male and female patients aged 16-69 years were recruited by Research Nurses in 3 primary care and dental outreach teaching centres and 2 General Dental Practices (GDPs), and by Dental Care Teams in 2 further GDPs. Participants completed a questionnaire (via an online tablet computer or paper) with socioeconomic, lifestyle, and sexual history items; and were followed up at 6-months for further questionnaire through appointment or post/online. Saline oral gargle/rinse samples, collected at baseline and follow-up, were subject to molecular HPV genotyping centrally. 1213 dental patients were approached and 402 individuals consented (participation rate 33.1%). 390 completed the baseline questionnaire and 380 provided a baseline oral specimen. Follow-up rate was 61.6% at 6 months. While recruitment was no different in Research Nurse vs Dental Care Team models the Nurse model ensured more rapid recruitment. There were relatively few missing responses in the questionnaire and high levels of disclosure of risk behaviours (99% answered some of the sexual history questions). Data linkage of participant data to routine health records including HPV vaccination data was successful with 99.1% matching. Oral rinse/gargle sample collection and subsequent HPV testing was feasible. Preliminary analyses found over 95% of samples to be valid for molecular HPV detection prevalence of oral HPV infection of 5.5% (95%CI 3.7, 8.3). It is feasible to recruit and follow-up dental patients largely representative / reflective of the wider population, suggesting it would be possible to undertake a study to investigate the prevalence, incidence, and determinants of oral HPV infection in dental settings.

  12. New bern biomass to energy project Phase I: Feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Parson, F.; Bain, R.

    1995-10-01

    Weyerhaeuser, together with Amoco and Carolina Power & Light, performed a detailed evaluation of biomass gasification and enzymatic processing of biomass to ethanol. This evaluation assesses the potential of these technologies for commercial application to determine which technology offers the best opportunity at this time to increase economic productivity of forest resources in an environmentally sustainable manner. The work performed included preparation of site-specific plant designs that integrate with the Weyerhaeuser New Bern, North Carolina pulp mill to meet overall plant energy requirements, cost estimates, resource and product market assessments, and technology evaluations. The Weyerhaeuser team was assisted by Stone & Webster Engineering Corporation and technology vendors in developing the necessary data, designs, and cost information used in this comparative study. Based on the information developed in this study and parallel evaluations performed by Weyerhaeuser and others, biomass gasification for use in power production appears to be technically and economically viable. Options exist at the New Bern mill which would allow commercial scale demonstration of the technology in a manner that would serve the practical energy requirements of the mill. A staged project development plan has been prepared for review. The plan would provide for a low-risk and cost demonstration of a biomass gasifier as an element of a boiler modification program and then allow for timely expansion of power production by the addition of a combined cycle cogeneration plant. Although ethanol technology is at an earlier stage of development, there appears to be a set of realizable site and market conditions which could provide for an economically attractive woody-biomass-based ethanol facility. The market price of ethanol and the cost of both feedstock and enzyme have a dramatic impact on the projected profitability of such a plant.

  13. Klamath County geo-heating district feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Lienau, P.J.; Lund, J.W.; Culver, G.G.

    1977-01-01

    The results are presented of an agreement between the Klamath County Commissioners and Oregon Institute of Technology Geo-Heat Utilization Center for the conceptual design, cost analysis and plan for space heating a number of public buildings in Klamath Falls, Oregon with geothermal hot water. This project was principally aimed at supplying geothermal heat to ten city and county buildings by hot water extracted from the existing museum well. The supply system is also designed to include the post office and a new building to be built in the vicinity of the courthouse. The fluid would be piped from the museum well to three liquid-to-liquid heat exchangers and returned to the area of the producing well for reinjection into the same aquifer. The study also considered space heating of 98 additional buildings in the downtown business district equivalent to the ten public buildings and incorporating a snow removal grid on Main Street between Eleventh and Fourth Streets. The geothermal fluid would be supplied from wells in the vicinity of Old Fort Road (city police pistol range) and returned for reinjection. Based on the study, the Center has concluded that no major resource or engineering difficulties exist that would prevent the ten-building project from being completed successfully with a significant long-term savings in both scarce fossil fuels and total heating costs. A direct environmental benefit of the large-scale plan would be a significant reduction in air pollutants (16 tons per year) from the burning of natural gas. For a capital investment of approximately $548,900 the delivery system, conversion of building heating systems and waste disposal could be accomplished for the ten buildings with potential expansion to twelve.

  14. Feasibility study of 3-T MR imaging of the skin

    Energy Technology Data Exchange (ETDEWEB)

    Aubry, Sebastien; Kastler, Bruno [CHU Jean Minjoz, Service de Radiologie A, Besancon Cedex (France); Universite de Franche-comte, Laboratoire Intervention, Imagerie, Ingenierie et Innovation en Sante, Besancon (France); Casile, Celine; Jehl, Jerome [CHU Jean Minjoz, Service de Radiologie A, Besancon Cedex (France); Humbert, Philippe [CHU Saint-Jacques, Service de Dermatologie, Besancon (France); Vidal, Chrystelle [CHU Saint-Jacques, Centre d' Investigation Clinique en Innovation technologique, Besancon (France)

    2009-07-15

    The purpose of this study was to assess the quality of 3-T magnetic resonance (MR) imaging of the skin, to describe skin anatomy at 3 T and to discuss future prospects of skin MRI. A 7-cm single-element surface receiver coil was developed for our 3-T MRI system. Thin sections were obtained with a three-dimensional FIESTA acquisition sequence and a spin-echo T1-weighted sequence (SET1). Prospective analysis was performed twice by two radiologists independently. Thirty-six healthy volunteers were included and underwent MRI on the face and the calf. Image quality was assessed regarding visibility of skin layers and quantification of artefacts. High field strength MR enables imaging of the skin with a high spatial in-plane resolution (87-180 {mu}m), the total examination lasting 15-20 min. Image quality was excellent for the calf (mean SET1 quality = 96%) with a high intra- and interobserver correlation (SET1 kappa coefficient concerning visibility of epidermis, dermis and hypodermis {>=} 0.84). Motion artefacts resulted in a small loss of quality and reproducibility for the face. In conclusion, 3-T MR allows high spatial resolution imaging of the skin and can potentially provide an accurate noninvasive means of analysing the skin. (orig.)

  15. Nutritional intervention in cognitively impaired geriatric trauma patients: a feasibility study

    Directory of Open Access Journals (Sweden)

    Eschbach D

    2016-09-01

    Full Text Available D Eschbach,1 T Kirchbichler,1 T Wiesmann,2 L Oberkircher,1 C Bliemel,1 S Ruchholtz,1 B Buecking1 1Center for Orthopedics and Trauma Surgery, 2Department of Anaesthesiology and Critical Care, University of Marburg, Marburg, Germany Background: Most studies focusing on improving the nutritional status of geriatric trauma patients exclude patients with cognitive impairment. These patients are especially at risk of malnutrition at admission and of worsening during the perioperative fasting period. This study was planned as a feasibility study to identify the difficulties involved in including this high-risk collective of cognitively impaired geriatric trauma patients. Patients and methods: This prospective intervention study included cognitively impaired geriatric patients (Mini–Mental State Examination <25, age >65 years with hip-related fractures. We assessed Mini Nutritional Assessment (MNA, Nutritional Risk Screening (NRS 2002, body mass index, calf circumference, American Society of Anesthesiologists’ classification, and Braden Scale. All patients received parenteral nutritional supplementation of 800 kcal/d for the 96-hour perioperative period. Serum albumin and pseudocholinesterase were monitored. Information related to the study design and any complications in the clinical course were documented. Results: A total of 96 patients were screened, among whom eleven women (median age: 87 years; age range: 74–91 years and nine men (median age: 82 years; age range: 73–89 years were included. The Mini–Mental State Examination score was 9.5 (0–24. All patients were manifestly undernourished or at risk according to MNA and NRS 2002. The body mass index was 23 kg/m2 (13–30 kg/m2, the calf circumference was 29.5 cm (18–34 cm, and the mean American Society of Anesthesiologists’ classification status was 3 (2–4. Braden Scale showed 18 patients at high risk of developing pressure ulcers. In all, 12 patients had nonsurgical

  16. Recycling of waste vegetable oil biodiesel and glycerine : social enterprise feasibility study

    International Nuclear Information System (INIS)

    2005-12-01

    This study examined the feasibility of recycling waste vegetable oil into biodiesel fuel as part of a social enterprise spearheaded by the Centre de sante communautaire in Sudbury. The enterprise proposed the collection of waste vegetable oil from local restaurants for refinement into biodiesel fuel as well as glycerine byproducts. The study included reviews of legal issues related to the project as well as details of community consultation processes. Target participants were also identified. The biodiesel industry was briefly reviewed along with details of the biodiesel manufacturing process. The study determined that 2 permanent employees will be required to run the biodiesel project. Initial staffing for the first year of the project was estimated at 4 full-time equivalent participants. Equipment and capital purchases for the first year of operation were estimated at $75,000. Total funds for startup of the project were estimated at $140,000. Budgets were supplied to the year 2009. 34 refs., 2 tabs., 5 figs

  17. Feasibility study for the quantitative assessment of mineral resources in asteroids

    Science.gov (United States)

    Keszthelyi, Laszlo; Hagerty, Justin; Bowers, Amanda; Ellefsen, Karl; Ridley, Ian; King, Trude; Trilling, David; Moskovitz, Nicholas; Grundy, Will

    2017-04-21

    This study was undertaken to determine if the U.S. Geological Survey’s process for conducting mineral resource assessments on Earth can be applied to asteroids. Successful completion of the assessment, using water and iron resources to test the workflow, has resulted in identification of the minimal adjustments required to conduct full resource assessments beyond Earth. We also identify the types of future studies that would greatly reduce uncertainties in an actual future assessment. Whereas this is a feasibility study and does not include a complete and robust analysis of uncertainty, it is clear that the water and metal resources in near-Earth asteroids are sufficient to support humanity should it become a fully space-faring species.

  18. Study of the techno-economic feasibilities of potato and onion irradiation in Syria

    International Nuclear Information System (INIS)

    Al-Bachir, M.; Sharabi, N.; Midani, M.A.

    1991-06-01

    Ionizing radiation has been used for food preservation in many ways, among them sprout inhibition in onion and potato. Experiments showed that irradiation of these crops using doses between 50 - 150 Gy prevented sprouting for up to 6 months during storage. Priliminary experiments in Syria proved the effectiveness of such treatment in these two crops. In addition to the technical, social, and political feasibility, this study includes, general description of the suggested plant ( 60 Co 3.7 PBq), estimated cost, location, and the tentative operation schedual. The study showed that the cost of irradiation will be about $ 8.7 per ton, this will save the country about $ 3.760.000 per year. The study showed the possitive effect of establishing this plant. (author). 74 refs., 44 tabs., 15 figs

  19. Recycling of waste vegetable oil biodiesel and glycerine : social enterprise feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-12-15

    This study examined the feasibility of recycling waste vegetable oil into biodiesel fuel as part of a social enterprise spearheaded by the Centre de sante communautaire in Sudbury. The enterprise proposed the collection of waste vegetable oil from local restaurants for refinement into biodiesel fuel as well as glycerine byproducts. The study included reviews of legal issues related to the project as well as details of community consultation processes. Target participants were also identified. The biodiesel industry was briefly reviewed along with details of the biodiesel manufacturing process. The study determined that 2 permanent employees will be required to run the biodiesel project. Initial staffing for the first year of the project was estimated at 4 full-time equivalent participants. Equipment and capital purchases for the first year of operation were estimated at $75,000. Total funds for startup of the project were estimated at $140,000. Budgets were supplied to the year 2009. 34 refs., 2 tabs., 5 figs.

  20. A Front-End Readout Architecture for the CMS Barrel Muon Detector: A Feasibility Study

    International Nuclear Information System (INIS)

    Aguayo, P.; Alberdi, J.; Barcala, J.M.; Marin, J.; Molinero, A.; Navarrete, J.; Pablos, J.L. de; Romero, L.; Willmot, C.

    1995-01-01

    A feasibility study of a possible architecture for the CMS barrel muon detector readout electronics is presented. some aspects of system reliability are discussed. Values for the required FIFO's to store data during the first level trigger latency are given

  1. Internet-based cognitive behavioral therapy for adolescents with anxiety disorders: A feasibility study

    Directory of Open Access Journals (Sweden)

    Silke Stjerneklar

    2018-03-01

    Conclusion: Results from this study indicate that a translated and revised version of the Chilled Out program could be a feasible psychological intervention for Danish adolescents with anxiety disorders.

  2. Experimental study of the feasibility of a spin valve based on superconductor/ferromagnet proximity effect

    International Nuclear Information System (INIS)

    Garifullin, I. A.; Garif'yanov, N. N.; Salikhov, R. I.; Westerholt, K.; Sprungmann, D.; Zabel, H.; Brucas, R.; Hjoervarsson, B.

    2007-01-01

    The feasibility of a superconducting spin valve based on superconductor/ferromagnet proximity effect is discussed. Experimental results obtained by the authors to date in studies of this problem are presented

  3. Technical Analysis Feasibility Study on Smart Microgrid System in Sekolah Tinggi Teknik PLN

    Science.gov (United States)

    Suyanto, Heri

    2018-02-01

    Nowadays application of new and renewable energy as main resource of power plant has greatly increased. High penetration of renewable energy into the grid will influence the quality and reliability of the electricity system, due to the intermittent characteristic of new and renewable energy resources. Smart grid or microgrid technology has the ability to deal with this intermittent characteristic especially if these renewable energy resources integrated to grid in large scale, so it can improve the reliability and efficiency of the grid. We plan to implement smart microgrid system at Sekolah Tinggi Teknik PLN as a pilot project. Before the pilot project start, the feasibility study must be conducted. In this feasibility study, the renewable energy resources and load characteristic at the site will be measured. Then the technical aspect of this feasibility study will be analyzed. This paper explains that analysis of ths feasibility study.

  4. Computer-Based Job and Occupational Data Collection Methods: Feasibility Study

    National Research Council Canada - National Science Library

    Mitchell, Judith I

    1998-01-01

    .... The feasibility study was conducted to assess the operational and logistical problems involved with the development, implementation, and evaluation of computer-based job and occupational data collection methods...

  5. Developing an undergraduate degree in public transportation administration and management : feasibility study results.

    Science.gov (United States)

    2006-11-01

    Experiences and results of research by the North Carolina Central University Department of Public Administration while a : conducting feasibility study for establishing a new multidisciplinary undergraduate degree in public transportation administrat...

  6. Electronic Adherence Monitoring in a High-Utilizing Pediatric Asthma Cohort: A Feasibility Study.

    Science.gov (United States)

    Kenyon, Chén Collin; Chang, Joyce; Wynter, Sheri-Ann; Fowler, Jessica C; Long, Jin; Bryant-Stephens, Tyra C

    2016-06-22

    Inner-city, minority children with asthma have the highest rates of morbidity and death from asthma and the lowest rates of asthma controller medication adherence. Some recent electronic medication monitoring interventions demonstrated dramatic improvements in adherence in lower-risk populations. The feasibility and acceptability of such an intervention in the highest-risk children with asthma has not been studied. Our objective was to assess the feasibility and acceptability of a community health worker-delivered electronic adherence monitoring intervention among the highest utilizers of acute asthma care in an inner-city practice. This was a prospective cohort pilot study targeting children with the highest frequency of asthma-related emergency department and hospital care within a local managed care Medicaid plan. The 3-month intervention included motivational interviewing, electronic monitoring of controller and rescue inhaler use, and outreach by a community health worker for predefined medication alerts. We measured acceptability by using a modified technology acceptability model and changes in asthma control using the Asthma Control Test (ACT). Given prominent feasibility issues, we describe qualitative patterns of medication use at baseline only. We enrolled 14 non-Hispanic black children with a median age of 3.5 years. Participants averaged 7.8 emergency or hospital visits in the year preceding enrollment. We observed three distinct patterns of baseline controller use: 4 patients demonstrated sustained use, 5 patients had periodic use, and 5 patients lapsed within 2 weeks. All participants initiated use of the electronic devices; however, no modem signal was transmitted for 5 or the 14 participants after a mean of 45 days. Of the 9 (64% of total) caregivers who completed the final study visit, all viewed the electronic monitoring device favorably and would recommend it to friends, and 5 (56%) believed that the device helped to improve asthma control. ACT

  7. A Smartphone App for Improvement of Colonoscopy Preparation (ColoprAPP): Development and Feasibility Study.

    Science.gov (United States)

    Walter, Benjamin; Schmid, Roland; von Delius, Stefan

    2017-09-20

    Optimal bowel preparation is one of the major cornerstones for quality of colonoscopy. But poor bowel preparation still occurs in 10% to 25% of all patients. To optimize patient guidance, we developed a new smartphone app (ColoprAPP) for Android smartphones which guides and accompanies the patient starting 4 days before colonoscopy throughout the whole colonoscopy preparation procedure. The objective of this study was to assess the function of a newly developed smartphone app for supporting colonoscopy preparation. We carried out a prospective feasibility study including 25 patients undergoing outpatient colonoscopy at our hospital. As a control, we retrieved the data of 25 patients undergoing outpatient colonoscopy matching in age, sex, and indication for colonoscopy from our colonoscopy database. Patients were asked to download the smartphone app, ColoprAPP, in addition to being given the regular colonoscopy preparation leaflet. All colonoscopies were performed in the morning after using a split-dose preparation containing a polyethlene glycol-based purgative. The study was designed to test feasibility of the prototype, evaluate grade of bowel cleanliness (Boston bowel preparation scale [BBPS]), and assess patient satisfaction with the app. The smartphone app use was feasible in all patients. BBPS count as a marker for grade of bowel preparation was significantly higher in the smartphone app-supported group (mean 8.1 [SD 0.3] vs 7.1 [SD 0.4], P=.02). Left (mean 2.8 [SD 0.1] vs 2.4 [SD 0.11], P=.02) and transverse colon (mean 2.8 [SD 0.07] vs 2.4 [SD 0.11], Papp-supported group than in controls. Patient satisfaction with a smartphone app-supported colonoscopy preparation was high with an average numeric rating scale score for usefulness of 8.2 (visual analog scale 1-10). A novel developed smartphone app for reinforced education of bowel cleansing was feasible and led to high BBPS scores and patient satisfaction. ClinicalTrials.gov NCT02512328; https

  8. Psychosexual distress in women with gynecologic cancer: a feasibility study of an online support group.

    Science.gov (United States)

    Classen, Catherine C; Chivers, Meredith L; Urowitz, Sara; Barbera, Lisa; Wiljer, David; O'Rinn, Susan; Ferguson, Sarah E

    2013-04-01

    The psychosexual concerns of gynecologic cancer patients are often unaddressed and there are limited resources available for women to deal with this highly sensitive topic. This feasibility study examines the participation rates and preliminary outcomes for an online support group designed specifically for women who are sexually distressed subsequent to gynecologic cancer treatment A 12-week online intervention was developed to address the psychosexual impact of gynecologic cancer. This intervention included a professionally moderated, asynchronous discussion forum as well as the provision of psycho-educational materials addressing the psychosexual impact of gynecologic cancer. Each week, a new topic was introduced and relevant material was posted on the website. Women were encouraged to share their experiences related to the topic. Twenty-seven, sexually distressed, remitted gynecologic cancer patients were randomly assigned to immediate treatment or a waitlist control condition. Participants completed questionnaires at baseline, 4-month and 8-month follow-ups assessing sexual distress as the primary outcome as well as anxiety, depression, and illness intrusiveness. Participation rates differed between the two groups, with greater participation occurring in the second group. Exit interviews indicated that the majority of the participants were satisfied with the intervention. Intent-to-treat analyses suggest a small effect for reduction in sexual distress This feasibility study suggests that women find this intervention acceptable. Further research is required to determine efficacy. Copyright © 2012 John Wiley & Sons, Ltd.

  9. Feasibility Study to Identify Potential Reductions in Energy Use in Tribal Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, Willie [Confederated Salish and Kootenai Tribes, Pablo, MT (United States)

    2017-03-30

    Under this project, the Confederated Salish and Kootenai Tribes (CSKT) assessed the technical and economic feasibility of energy efficiency improvements to existing Tribally-owned buildings. The feasibility study followed a systematic approach in identifying, selecting, and ranking recommended measures, recognizing that the appropriateness of a measure would depend not only on technical issues but also on institutional and organizational issues, such as financing options and occupant requirements. The completed study provided the Tribes with the information needed to commit necessary resources to reduce the energy use and cost in approximately 40 Tribal buildings, including the changes that may be needed in each facility’s operation and maintenance and personnel requirements. It also presented an economic analysis of energy-efficiency capital improvements and an annotated list of financing options and possible funding sources for implementation and an overall strategy for implementation. This project was located in various Tribal communities located throughout the Flathead Indian Reservation in Western Montana. Notice: The following is a compilation of Annual Program Review Presentations, Award Modifications, and Quarterly Progress Reports submitted to the Department of Energy’s (DOE) Office of Indian Energy Policy and Programs by the Confederated Salish and Kootenai Tribes under agreement DE-EE0005171. This report covers project activities from September 30, 2011 through December 31, 2014 and has been uploaded to OSTI by DOE as a substitute for the required Final Technical Report which was not received by DOE from the project recipient.

  10. A neutronic feasibility study for LEU conversion of the WWR-M reactor at Gatchina

    International Nuclear Information System (INIS)

    Petrov, Yu. V.; Erykalov, A.N.; Onegin, M.S.

    2000-01-01

    In this report we present the results of computations of the full scale reactor core with HEU (90%), MEU (36%) and LEU (19.75%) fuel. The reactor computer model for the MCU RFFI Monte Carlo code includes all peculiarities of the core. Calculations show that a uranium density of 3.3gU/cm 3 of MEU (36%) fuel and 8/25gU/cm 3 of LEU (19.75%) in WWR-M5 fuel assembly (FA) geometry is required to match the fuel cycle length of the HEU (90%) case with the same end of cycle (EOEC) excess reactivity. For the equilibrium fuel cycle the fuel burnup and poisoning, the fast and thermal neutron fluxes, the reactivity worth of control rods were calculated for the reference case with HEU (90%) FA and for the MEU and LEU FA. The relative accuracy of this neutronic feasibility study of fuel enrichment reduction of the WWR-M reactor in Gatchina is sufficient to start the fabrication feasibility study of MEU (36%) WWR-M5 fuel assemblies. At the present stage of technology it seems hardly possible to manufacture LEU (19.75%) fuel elements in WWR-M5 geometry due to too high uranium density. Only a future R and D can solve the problem. (author)

  11. Peristalsis gap sign at cine magnetic resonance imaging for diagnosing strangulated small bowel obstruction. Feasibility study

    International Nuclear Information System (INIS)

    Takahara, Taro; Kwee, T.C.; Haradome, Hiroki

    2011-01-01

    The aim of this study was to determine the feasibility of cine magnetic resonance imaging (MRI) for diagnosing strangulated small bowel obstruction (SBO). This study included 38 patients with clinically confirmed SBO who had undergone cine MRI. Cine MRI scans were evaluated regarding the presence of the 'peristalsis gap sign' (referring to an akinetic or severely hypokinetic closed loop), indicating strangulation. Computed tomography (CT) was performed in 34 of 38 patients with (n=25) or without (n=9) contrast enhancement. CT images were evaluated using a combination of criteria (presence of hyperattenuation, poor contrast enhancement, mesenteric edema, wall thickening, massive ascites) indicating strangulation. Sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of cine MRI and CT for the diagnosis of strangulation were calculated and compared using surgical findings and the clinical course as the reference standard. Sensitivity, specificity, PPV, and NPV of cine MRI were 100%, 92.9%, 83.3%, and 100%, respectively; and those of CT (of which 26.5% was performed without contrast enhancement) were 66.7%, 92.0%, 75.0%, and 88.5%, respectively. There was no significant difference in diagnostic accuracy between the two methods (P=0.375). Cine MRI is a feasible and promising technique for diagnosing strangulation. (author)

  12. Feasibility study on the verification of fresh fuel assemblies in shipping containers

    Energy Technology Data Exchange (ETDEWEB)

    Swinth, K.L.; Tanner, J.E.

    1990-09-01

    The purpose of this study was to examine the feasibility of using various nondestructive measurement techniques to determine the presence of fuel assemblies inside shipping containers and to examine the feasibility of measuring the fissile content of the containers. Passive and active techniques based on both gamma and neutron assay were examined. In addition, some experiments and calculations were performed to evaluate neutron techniques. Passive counting of the 186 keV gamma from {sup 235}U is recommended for use as an attributes measurement technique. Experiments and studies indicated that a bismuth germanate (BGO) scintillator is the preferred detector. A properly designed system based on this detector will provide a compact detector that can selectively verify fuel assemblies within a shipping container while the container is in a stack of similarly loaded containers. Missing fuel assemblies will be readily detected, but gamma counting of assemblies cannot detect changes in the fissile content of the inner rods in an assembly. If a variables technique is required, it is recommended that more extensive calculations be performed and removal of the outer shipping container be considered. Marking (sealing) of the assemblies with a uniquely identifiable transponder was also considered. This would require the development of procedures that would assure proper application and removal of the seal. When change to a metal outer container occurs, the technique will no longer be useful unless a radiolucent window is included in the container. 20 refs., 7 figs., 2 tabs.

  13. A pragmatic observational feasibility study on integrated treatment for musculoskeletal disorders: Design and protocol.

    Science.gov (United States)

    Hu, Xiao-yang; Hughes, John; Fisher, Peter; Lorenc, Ava; Purtell, Rachel; Park, A-La; Robinson, Nicola

    2016-02-01

    Musculoskeletal disorders (MSD) comprise a wide range of conditions, associated with an enormous pain and impaired mobility, and are affecting people's lives and work. Management of musculoskeletal disorders typically involves a multidisciplinary team approach. Positive findings have been found in previous studies evaluating the effectiveness of complementary therapies, though little attention has been paid to evaluating of the effectiveness of integrated packages of care combining conventional and complementary approaches for musculoskeletal conditions in a National Health Service (NHS) setting. To determine the feasibility of all aspects of a pragmatic observational study designed: (1) to evaluate the effectiveness and cost effectiveness of integrated treatments for MSDs in an integrated NHS hospital in the UK; (2) to determine the acceptability of the study design and research process to patients; (3) to explore patients' expectation and experience of receiving integrated treatments. This is an observational feasibility study, with 1-year recruitment and 1-year follow-up, conducted in Royal London Hospital for Integrated Medicine, University College London Hospital Trust, UK. All eligible patients with MSDs newly referred to the hospital were included in the study. Interventions are integrated packages of care (conventional and complementary) as currently provided in the hospital. SF-36™ Health Survey, short form Brief Pain Inventory, Visual Analogue Scale, and modified Client Service Receipt Inventory will be assessed at 4/5 time points. Semi-structured interview/focus group will be carried out before treatment, and 1 year after commence of treatment. We intend to conduct a pragmatic observational study of integrated medical treatment of MSDs at a public sector hospital. It will inform the design of a future trial including recruitment, retention, suitability of the outcome measures and patients experiences.

  14. A single-group pilot feasibility study of cognitive behavioural therapy in people with multiple sclerosis with depressive symptoms.

    Science.gov (United States)

    Chruzander, Charlotte; Gottberg, Kristina; Ytterberg, Charlotte; Backenroth, Gunnel; Fredrikson, Sten; Widén Holmqvist, Lotta; Johansson, Sverker

    2016-12-01

    The aims were to evaluate (a) the feasibility of face-to-face cognitive behavioural therapy (CBT) in people with MS (PwMS) with depressive symptoms; (b) the feasibility of methods and measurements used; and (c) the outcome of the intervention before the conducting of an equivalence study of comparative methods of face-to-face CBT. A single-group pilot feasibility study. PwMS (n = 15) with sub-threshold to moderate depressive symptoms, recruited at the Karolinska University Hospital, Stockholm, Sweden. The intervention consisted of 15-20 sessions of face-to-face CBT. Feasibility outcomes included recruitment rate, recruitment procedure and adverse events. Primary clinical outcome was the Beck Depression Inventory-II (BDI-II). Follow-ups were conducted after 3 weeks and 3 months. An estimated sample size calculation was conducted. The face-to-face CBT intervention, methods and measurements used were feasible. The outcome on BDI-II indicated that face-to-face CBT is an effective method for alleviating sub-threshold to moderate depressive symptoms in PwMS. Face-to-face CBT is feasible for use in PwMS aiming at decrease depressive symptoms. For an equivalence study, a screening process for depressive symptoms and two comparative intervention arms including traditional face-to-face CBT and low-intensity face-to-face CBT is recommended. Primary outcomes should include the BDI-II and also assessment of anxiety symptoms. Implications for Rehabilitation Depression is common among people with MS (PwMS), however, depressed PwMS do not always receive adequate treatment for depression which may lead to increased disability and worse health-related quality of life (HRQL). Cognitive behavioural therapy (CBT) is a psychological treatment method that might be beneficial for PwMS with depressive symptoms, but the evidence is still weak and further research is needed. The results from our pilot feasibility study demonstrate that for an effectiveness study of face-to-face CBT for

  15. Therapeutic Argentine Tango Dancing for People with Mild Parkinson's Disease: A Feasibility Study.

    Science.gov (United States)

    Blandy, Laura M; Beevers, Winifred A; Fitzmaurice, Kerry; Morris, Meg E

    2015-01-01

    Individuals living with Parkinson's disease (PD) can experience a range of movement disorders that affect mobility and balance and increase the risk of falls. Low health-related quality of life, depression, and anxiety are more common in people with PD than age-matched comparisons. Therapeutic dance is a form of physical activity believed to facilitate movement and therapy uptake. As well as being enjoyable, dancing is thought to improve mobility, balance, and well-being in some people living with PD. The primary objective of this study was to evaluate the feasibility and safety of a 4-week Argentine tango dance program for people with PD. Six community dwelling individuals with mild to moderate PD were recruited from Parkinson's support groups, movement disorder clinics, and the PD association in Australia. To minimize falls risk, participants were required to be dance class at a dance studio twice per week for 4 weeks. A professional dance instructor led and choreographed the Argentine tango dance classes. Physiotherapists were present to assist participants during the class and served as dance partners as necessary. The primary outcome was feasibility, which was determined by measures of recruitment, adherence, attrition, safety (falls, near misses and adverse events), and resource requirements. Secondary measures included the Beck Depression Inventory and the Euroqol-5D, administered at baseline and post intervention. Therapy outcomes pre- and post-intervention were analyzed descriptively as medians and interquartile ranges and using Wilcoxon matched pair signed-rank tests. The Argentine tango dance intervention was shown to be safe, with no adverse events. Adherence to the dance program was 89%. Depression scores improved after intervention (p = 0.04). Some challenges were associated with the need to quickly recruit participants and physiotherapists to act as dance partners during classes and to monitor participants. The 4-week, twice weekly Argentine

  16. Therapeutic Argentine tango dancing for people living with Parkinson’s disease: a feasibility study

    Directory of Open Access Journals (Sweden)

    Laura M Blandy

    2015-05-01

    Full Text Available Background: Individuals living with Parkinson’s disease (PD can experience a range of movement disorders. Therapeutic dance is enjoyable and thought to improve mobility, balance and well being in some people with PD. The primary objective of this study was to evaluate the feasibility and safety of a 4 week Argentine tango dance program for people with PD. Methods: Six community dwelling individuals with mild-moderate PD were recruited from Parkinson’s support groups, movement disorder clinics and the Parkinson’s disease Association in Australia. To minimise falls risk, participants were required to be less than 75 years of age and physically independent (Hoehn and Yahr stages I-III. They were also required to speak English. Participants attended a 1 hour dance class at a dance studio twice per week for 4 weeks. A professional dance instructor led and choreographed the classes. Physiotherapists were present to assist participants during the class and served as dance partners as necessary. The primary outcome was feasibility which was determined by measures of recruitment, adherence, attrition, safety (falls, near misses and adverse events and resource requirements. Secondary measures included the Beck Depression Inventory and the Euroqol-5D, administered at baseline and post intervention. Therapy outcomes pre and post-intervention were analysed descriptively as medians and inter-quartile ranges and using Wilcoxon matched pair signed-rank tests.Results: The Argentine tango dance intervention was shown to be safe, with no adverse events. Adherence to the dance program was 89%. Depression scores improved after intervention (p=0.04. Some challenges were associated with the need to quickly recruitment participants and supplying physiotherapists to act as dance partners. Conclusion: The program was shown to be feasible and safe for people with mild to moderately severe PD.

  17. On-site laboratory support of the Oak Ridge National Laboratory remedial investigation/feasibility study

    International Nuclear Information System (INIS)

    Burn, J.L.E.; Brooksbank, R.D.; Dillener, J.L.; Jeskie, T.R.

    1992-10-01

    In 1987, a remedial investigation/feasibility study (RI/FS) was begun at Oak Ridge National Laboratory (ORNL). ORNL had established a number of waste area groupings (WAGs), each of which was to be studied and characterized separately. Although the nature and extent of contamination at the WAGs vary widely, samples from each WAG might be radiologically and/or chemically contaminated. To comply with Department of Transportation (DOT) regulations regarding the shipment of hazardous and radioactive materials, all samples are screened for radioactivity before shipment to independent laboratories for further analysis. In 1989 a Close Support Laboratory (CSL) was established at the RI/FS Field Operations Facility at ORNL. The CSL began as a screening facility and has evolved into a laboratory where high-quality analytical results on a number of different parameters are usually available within 24 hours of sampling. CSL capabilities include three basic areas: radiochemistry, volatile organic analysis (VOA), and wet chemistry

  18. Feasibility and design study of a frictionless air mover for thermal management of electronics

    International Nuclear Information System (INIS)

    Schacht, R; Hausdorf, A; Wunderle, B

    2014-01-01

    A frictionless air mover concept is introduced in this paper. As opposed to a piezoelectric driven fan, the air mover is based on a flexible blade whose vibration is driven by means of a magnetic field. The blade is based on a polymer material. The paper presents the results of a feasibility analysis and an on-going comprehensive design study. The performance of the prototype amounted to 65% of a comparable piezoelectric fan. To enhance the performance, two different blade materials were investigated, as well as the influence of the coil shape and value. A further goal is to reduce the size and to investigate the influence of a casing. The design study resulted in a prototype of size of 50 × 14 × 35 mm 2 including a casing. The performance could be doubled, to attain a volumetric flow rate of V-dot ∼14 l/min and a static pressure of ρ stat = 3 Pa.

  19. Feasibility and design study of a frictionless air mover for thermal management of electronics

    Science.gov (United States)

    Schacht, R.; Hausdorf, A.; Wunderle, B.

    2014-07-01

    A frictionless air mover concept is introduced in this paper. As opposed to a piezoelectric driven fan, the air mover is based on a flexible blade whose vibration is driven by means of a magnetic field. The blade is based on a polymer material. The paper presents the results of a feasibility analysis and an on-going comprehensive design study. The performance of the prototype amounted to 65% of a comparable piezoelectric fan. To enhance the performance, two different blade materials were investigated, as well as the influence of the coil shape and value. A further goal is to reduce the size and to investigate the influence of a casing. The design study resulted in a prototype of size of 50 × 14 × 35 mm2 including a casing. The performance could be doubled, to attain a volumetric flow rate of dot V ~14 l/min and a static pressure of ρstat = 3 Pa.

  20. Renewable Energy Feasibility Study Leading to Development of the Native Spirit Solar Energy Facility

    Energy Technology Data Exchange (ETDEWEB)

    Carolyn Stewart; Tracey LeBeau

    2008-01-31

    DOE-funded renewable energy feasibility study conducted by Red Mountain Tribal Energy on behalf of the Southwest Tribal Energy Consortium (SWTEC). During the course of the study, SWTEC members considered multiple options for the organization structure, selected a proposed organization structure, and drafted a Memorandum of Understanding for the SWTEC organization. High-level resource assessments for SWTEC members were completed; surveys were developed and completed to determine each member’s interest in multiple participation options, including on-reservation projects. With the survey inputs in mind, multiple energy project options were identified and evaluated on a high-level basis. That process led to a narrowing of the field of technology options to solar generation, specifically, utility-scale Concentrating Solar-Powered Generation projects, with a specific, tentative project location identified at the Fort Mojave Indian Reservation -- the Native Spirit Solar Energy Facility.

  1. Remedial investigation/feasibility study report for Lower Watts Bar Reservoir Operable Unit

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This document is the combined Remedial Investigation and Feasibility Study Report for the lower Watts Bar Reservoir (LWBR) Operable Unit (OU). The LWBR is located in Roane, Rhea, and Meigs counties, Tennessee, and consists of Watts Bar Reservoir downstream of the Clinch river. This area has received hazardous substances released over a period of 50 years from the US Department of Energy`s Oak Ridge Reservation (ORR), a National Priority List site established under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). As required by this law, the ORR and all off-site areas that have received contaminants, including LWBR, must be investigated to determine the risk to human health and the environment resulting from these releases, the need for any remedial action to reduce these risks, and the remedial actions that are most feasible for implementation in this OU. Contaminants from the ORR are primarily transported to the LWBR via the Clinch River. There is little data regarding the quantities of most contaminants potentially released from the ORR to the Clinch River, particularly for the early years of ORR operations. Estimates of the quantities released during this period are available for most radionuclides and some inorganic contaminants, indicating that releases 30 to 50 years ago were much higher than today. Since the early 1970s, the release of potential contaminants has been monitored for compliance with environmental law and reported in the annual environmental monitoring reports for the ORR.

  2. A pilot study using next-generation sequencing in advanced cancers: feasibility and challenges.

    Science.gov (United States)

    Weiss, Glen J; Liang, Winnie S; Demeure, Michael J; Kiefer, Jeff A; Hostetter, Galen; Izatt, Tyler; Sinari, Shripad; Christoforides, Alexis; Aldrich, Jessica; Kurdoglu, Ahmet; Phillips, Lori; Benson, Hollie; Reiman, Rebecca; Baker, Angela; Marsh, Vickie; Von Hoff, Daniel D; Carpten, John D; Craig, David W

    2013-01-01

    New anticancer agents that target a single cell surface receptor, up-regulated or amplified gene product, or mutated gene, have met with some success in treating advanced cancers. However, patients' tumors still eventually progress on these therapies. If it were possible to identify a larger number of targetable vulnerabilities in an individual's tumor, multiple targets could be exploited with the use of specific therapeutic agents, thus possibly giving the patient viable therapeutic alternatives. In this exploratory study, we used next-generation sequencing technologies (NGS) including whole genome sequencing (WGS), and where feasible, whole transcriptome sequencing (WTS) to identify genomic events and associated expression changes in advanced cancer patients. WGS on paired tumor and normal samples from nine advanced cancer patients and WTS on six of these patients' tumors was completed. One patient's treatment was based on targets and pathways identified by NGS and the patient had a short-lived PET/CT response with a significant reduction in his tumor-related pain. To design treatment plans based on information garnered from NGS, several challenges were encountered: NGS reporting delays, communication of results to out-of-state participants and their treating oncologists, and chain of custody handling for fresh biopsy samples for Clinical Laboratory Improvement Amendments (CLIA) target validation. While the initial effort was a slower process than anticipated due to a variety of issues, we demonstrate the feasibility of using NGS in advanced cancer patients so that treatments for patients with progressing tumors may be improved.

  3. A review on highlights and feasibility studies on solar energy utilization in Malaysia

    Science.gov (United States)

    Wahid, Siti Sufiah Abd; Ramli, Mohd Sufian; Noorden, Zulkarnain Ahmad; Hassan, Khairul Kamarudin; Azli, Shakira Azeehan

    2017-08-01

    Over the years, solar has been one of the main substitutes of electricity resources worldwide including Malaysia in effort to reduce the dependency on the conventional fossil fuel. In this paper, the status of solar energy in Malaysia Plans is investigated while the techniques used in various techno-economic and economic feasibility studies on the implementation of solar energy system are analyzed. The state of awareness and understanding on solar energy among Malaysians is also determined. It has been found that a mathematical formulation method as well as an iterative technique which both consider lots of uncertainties are capable in optimally designing a photovoltaic, PV system while minimizing the cost. Meanwhile, a financial model using probabilistic and sensitivity analysis is able to provide the potential investors with the profitability of a PV project. Finally, several surveys has proven that Malaysian people are lack of awareness, information thus interest on solar technology. Therefore, in evaluating the feasibilities of a PV system, it is suggested that considerations on all solar-related variables must be taken into account while at the same time the Government of Malaysia, GoM should play the main role by providing more aggressive programmes and schemes in order to educate and expose Malaysian citizens with knowledge and skills on solar energy.

  4. Measurement of cochlear length using the 'A' value for cochlea basal diameter: A feasibility study.

    Science.gov (United States)

    Deep, Nicholas L; Howard, Brittany E; Holbert, Sarah O; Hoxworth, Joseph M; Barrs, David M

    2017-07-01

    To determine whether the cochlea basal diameter (A value) measurement can be consistently and precisely obtained from high-resolution temporal bone imaging for use in cochlear length estimation. A feasibility study at a tertiary referral center was performed using the temporal bone CTs of 40 consecutive patients. The distance from the round window to the lateral wall was measured for each cochlea by two independent reviewers, a neuroradiologist and an otolaryngologist. The interrater reliability was calculated using the intraclass correlation coefficient (ICC) and the Bland-Altman plot. Forty patients (19 males, 21 females) for a total of 80 cochleae were included. Interrater reliability on the same ear had a high level of agreement by both the ICC and the Bland-Altman plot. ICCs were 0.90 (95% CI: 0.82, 0.94) for the left ear and 0.96 (95% CI: 0.92, 0.98) for the right ear. Bland-Altman plot confirmed interrater reliability with all 96% of measurements falling within the 95% limits of agreement. Measurement between the round window and lateral cochlear wall can be consistently and reliably obtained from high-resolution temporal bone CT scans. Thus, it is feasible to utilize this method to estimate the cochlear length of patients undergoing cochlear implantation.

  5. Remedial investigation/feasibility study report for Lower Watts Bar Reservoir Operable Unit

    International Nuclear Information System (INIS)

    1995-03-01

    This document is the combined Remedial Investigation and Feasibility Study Report for the lower Watts Bar Reservoir (LWBR) Operable Unit (OU). The LWBR is located in Roane, Rhea, and Meigs counties, Tennessee, and consists of Watts Bar Reservoir downstream of the Clinch river. This area has received hazardous substances released over a period of 50 years from the US Department of Energy's Oak Ridge Reservation (ORR), a National Priority List site established under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). As required by this law, the ORR and all off-site areas that have received contaminants, including LWBR, must be investigated to determine the risk to human health and the environment resulting from these releases, the need for any remedial action to reduce these risks, and the remedial actions that are most feasible for implementation in this OU. Contaminants from the ORR are primarily transported to the LWBR via the Clinch River. There is little data regarding the quantities of most contaminants potentially released from the ORR to the Clinch River, particularly for the early years of ORR operations. Estimates of the quantities released during this period are available for most radionuclides and some inorganic contaminants, indicating that releases 30 to 50 years ago were much higher than today. Since the early 1970s, the release of potential contaminants has been monitored for compliance with environmental law and reported in the annual environmental monitoring reports for the ORR

  6. Implementing resilience engineering for healthcare quality improvement using the CARE model: a feasibility study protocol.

    Science.gov (United States)

    Anderson, J E; Ross, A J; Back, J; Duncan, M; Snell, P; Walsh, K; Jaye, P

    2016-01-01

    Resilience engineering (RE) is an emerging perspective on safety in complex adaptive systems that emphasises how outcomes emerge from the complexity of the clinical environment. Complexity creates the need for flexible adaptation to achieve outcomes. RE focuses on understanding the nature of adaptations, learning from success and increasing adaptive capacity. Although the philosophy is clear, progress in applying the ideas to quality improvement has been slow. The aim of this study is to test the feasibility of translating RE concepts into practical methods to improve quality by designing, implementing and evaluating interventions based on RE theory. The CARE model operationalises the key concepts and their relationships to guide the empirical investigation. The settings are the Emergency Department and the Older Person's Unit in a large London teaching hospital. Phases 1 and 2 of our work, leading to the development of interventions to improve the quality of care, are described in this paper. Ethical approval has been granted for these phases. Phase 1 will use ethnographic methods, including observation of work practices and interviews with staff, to understand adaptations and outcomes. The findings will be used to collaboratively design, with clinical staff in interactive design workshops, interventions to improve the quality of care. The evaluation phase will be designed and submitted for ethical approval when the outcomes of phases 1 and 2 are known. Study outcomes will be knowledge about the feasibility of applying RE to improve quality, the development of RE theory and a validated model of resilience in clinical work which can be used to guide other applications. Tools, methods and practical guidance for practitioners will also be produced, as well as specific knowledge of the potential effectiveness of the implemented interventions in emergency and older people's care. Further studies to test the application of RE at a larger scale will be required

  7. A guideline to study the feasibility domain of multi-trophic and changing ecological communities.

    Science.gov (United States)

    Song, Chuliang; Rohr, Rudolf P; Saavedra, Serguei

    2018-04-24

    The feasibility domain of an ecological community can be described by the set of environmental abiotic and biotic conditions under which all co-occurring and interacting species in a given site and time can have positive abundances. Mathematically, the feasibility domain corresponds to the parameter space compatible with positive (feasible) solutions at equilibrium for all the state variables in a system under a given model of population dynamics. Under specific dynamics, the existence of a feasible equilibrium is a necessary condition for species persistence regardless of whether the feasible equilibrium is dynamically stable or not. Thus, the size of the feasibility domain can also be used as an indicator of the tolerance of a community to random environmental variations. This has motivated a rich research agenda to estimate the feasibility domain of ecological communities. However, these methodologies typically assume that species interactions are static, or that input and output energy flows on each trophic level are unconstrained. Yet, this is different to how communities behave in nature. Here, we present a step-by-step quantitative guideline providing illustrative examples, computational code, and mathematical proofs to study systematically the feasibility domain of ecological communities under changes of interspecific interactions and subject to different constraints on the trophic energy flows. This guideline covers multi-trophic communities that can be formed by any type of interspecific interactions. Importantly, we show that the relative size of the feasibility domain can significantly change as a function of the biological information taken into consideration. We believe that the availability of these methods can allow us to increase our understanding about the limits at which ecological communities may no longer tolerate further environmental perturbations, and can facilitate a stronger integration of theoretical and empirical research. Copyright

  8. Feasibility of determination of low-head hydroelectric power development at existing sites. Big Blue River Co-dependent Hydroelectric Development: feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Wacker, H. Steve; Feuerberg, Stan; Lawrence, John D.; Pal, Parimal C.; Trick, Dr., William T.

    1979-03-01

    The technical, economic, environmental, safety, and financial aspects of redeveloping 7 dam sites in Nebraska for hydroelectric power generation were studied. The Big Blue River Co-dependent Hydroelectric Development was found to be a technically feasible concept, for both redevelopment and in some cases rehabilitation of seven existing sites. The proposed redevelopment project will include seven installations with a recommended nominally rated redeveloped capacity of 3920 kW ranging from 120 kW at the northernmost site in Seward County to 1500 kW at Barneston. The average annual gross generation expected from the seven redeveloped sites totals 11,555,000 kWh. It is estimated that the total cost of redevelopment of these seven sites will be $14,090,000 at 1979 price levels, providing power at an average levelized cost of about 5.3 cents per kWh based on 7% cost of money, a mid-1983 commissioning date, and allowing for funds during construction and cost escalation over a 30-year period. Rehabilitation of original installations at Crete, Dewitt, Blue Springs and Barneston is technically feasible for a total installed capacity of 1415 kW with annual average gross generation of 6,675,000 kWh. The total cost of this rehabilitation is estimated as $3,372,000 at 1979 price levels, or about 2.4 cents per kWh, levelized on a similar basis. Rehabilitation of the Barneston site alone for an installed capacity of 760 kW and annual generation of 3,581,000 kWh is both technically and economically feasible. The total estimated cost of this alternative is $668,000, providing power at a cost of about 1.9 cents per kWh at 1979 price levels. The benefit-cost ratio for Barneston rehabilitation is estimated as 1.23.

  9. Feasibility study for siting of a deep repository within the Storuman municipality

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    It is SKB`s task to gather a broad body of information for the siting of a deep repository for Sweden`s spent nuclear fuel and other long-lived radioactive waste. The criteria presented by SKB serve as guidelines for the siting studies. Overviews of siting factors are compiled in general siting studies of all or parts of Sweden. Feasibility studies examine the siting prospects in potentially suitable and interested municipalities. SKB plans to carry out feasibility studies in five to ten municipalities in different parts of the country. General studies and feasibility studies are primarily based on existing material. The feasibility study in Storuman is the first to be conducted. It began during the second half of 1993 with the conclusion of an agreement between the municipality and SKB. SKB has been in charge of the execution of the feasibility study. SKB has been responsible for the summary provided in a status report published in June 1994, as well as for the conclusions and evaluations in this final report. Altogether about 30 reports have been published within the framework of the feasibility study. The purpose of the various studies have been to describe, in as much detail as possible, the prospects for siting a deep repository in the municipality of Storuman, and to shed light on the possible positive and negative consequences of such a siting. The feasibility study has led to a discussion within the municipality and the region concerning the siting of a deep repository. In SKB`s opinion, this gives all those concerned ample opportunity to become acquainted with the issues and to assert their interests and present their viewpoints at an early stage. 55 refs.

  10. Feasibility study for siting of a deep repository within the Storuman municipality

    International Nuclear Information System (INIS)

    1995-01-01

    It is SKB's task to gather a broad body of information for the siting of a deep repository for Sweden's spent nuclear fuel and other long-lived radioactive waste. The criteria presented by SKB serve as guidelines for the siting studies. Overviews of siting factors are compiled in general siting studies of all or parts of Sweden. Feasibility studies examine the siting prospects in potentially suitable and interested municipalities. SKB plans to carry out feasibility studies in five to ten municipalities in different parts of the country. General studies and feasibility studies are primarily based on existing material. The feasibility study in Storuman is the first to be conducted. It began during the second half of 1993 with the conclusion of an agreement between the municipality and SKB. SKB has been in charge of the execution of the feasibility study. SKB has been responsible for the summary provided in a status report published in June 1994, as well as for the conclusions and evaluations in this final report. Altogether about 30 reports have been published within the framework of the feasibility study. The purpose of the various studies have been to describe, in as much detail as possible, the prospects for siting a deep repository in the municipality of Storuman, and to shed light on the possible positive and negative consequences of such a siting. The feasibility study has led to a discussion within the municipality and the region concerning the siting of a deep repository. In SKB's opinion, this gives all those concerned ample opportunity to become acquainted with the issues and to assert their interests and present their viewpoints at an early stage. 55 refs

  11. Report of year 2000 version on feasibility study. Feasibility study on the diffusion of fluidized bed cement kiln system in Socialist Republic of Viet Nam

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Evaluations were given on the possibility of saving energies and reducing CO2 emission by renewing the shaft kilns operated in four factories in Viet Nam into fluidized bed kilns. The feasibility study is intended to be linked to the clean development mechanism (CDM) in the future. The fluidized bed kiln is a most advanced technology developed to deal with social, economic and technological demands such as global environment preservation, energy conservation, effective utilization of resources, enhancement of economic performance, and diversification of cement needs. The technology is capable of largely reducing greenhouse effect gases, eliminating the problem of dust scattering from sintering facilities, producing stabilized and high-quality clinker, making possible of using inexpensive fuels including low-order coal, using less installation space, and reducing the production cost. The amount of energy reduction in all of the four factories is calculated 8,101 to 9,551 toe/year at an energy saving effect rate of 37 to 44%. CO2 emission is reduced as a result of reduction in fuel for sintering furnaces and in electric power consumption. The reduction amount would be 24,393 to 38,794 tons/year (converted into CO2), and the reduction effect rate would be 36 to 44%. The investment effect looks sufficient as payout of 10 to 12 years if the environment special Yen loan is used. Trial calculation was also performed for the nation-wide proliferation effect. (NEDO)

  12. A Cognitive-Behavioral Therapy Group Intervention for Hypersexual Disorder: A Feasibility Study.

    Science.gov (United States)

    Hallberg, Jonas; Kaldo, Viktor; Arver, Stefan; Dhejne, Cecilia; Öberg, Katarina Görts

    2017-07-01

    The proposed criteria of the Diagnostic and Statistical Manual for Mental Disorders, Fifth Edition for hypersexual disorder (HD) included symptoms reported by patients seeking help for excessive and out-of-control non-paraphilic sexual behavior, including sexual behaviors in response to dysphoric mood states, impulsivity, and risk taking. Although no prior studies of cognitive-behavioral therapy (CBT) for the treatment of HD have been performed, CBT has been found effective for dysphoric mood states and impulsivity. To investigate the feasibility of a CBT manual developed for HD explored through symptom decrease, treatment attendance, and clients' treatment satisfaction. Ten men with a diagnosis of HD took part in the CBT group program. Measurements were taken before, during, and at the end of treatment and 3 and 6 months after treatment. The primary outcome was the Hypersexual Disorder: Current Assessment Scale (HD:CAS) score that measured the severity of problematic hypersexual symptoms and secondary outcomes were the Hypersexual Disorder Screening Inventory (HDSI) score, the proportion of attended sessions, and the Client Satisfaction Questionnaire (CSQ-8) score. Main results were significant decreases of HD symptoms from before to after treatment on HD:CAS and HDSI scores and a decrease in the number of problematic sexual behaviors during the course of therapy. A high attendance rate of 93% and a high treatment satisfaction score on CSQ-8 also were found. The CBT program seemed to ameliorate the symptoms of HD and therefore might be a feasible treatment option. This study provides data from a CBT program for the treatment of the specific proposed criteria of HD. Because of the small sample and lack of a control group, the results can be considered only preliminary. Although participants reported decreased HD symptoms after attending the CBT program, future studies should evaluate the treatment program with a larger sample and a randomized controlled procedure

  13. The Use of Market Feasibility Studies in the Restaurant Industry for Small and Medium-sized Restaurants

    OpenAIRE

    Kolster, Maria

    2017-01-01

    The goals of this thesis are to provide the reader with new information about market feasibility studies in the restaurant industry and to design a market feasibility template for the international restaurant industry which can be used for small and medium-sized restaurants before entering the market. The objectives are to define the ideal factors of a market feasibility study for the international restaurant industry, to learn and become an expert in feasibility studies for the restaurant i...

  14. Feasibility of Combining Common Data Elements Across Studies to Test a Hypothesis.

    Science.gov (United States)

    Corwin, Elizabeth J; Moore, Shirley M; Plotsky, Andrea; Heitkemper, Margaret M; Dorsey, Susan G; Waldrop-Valverde, Drenna; Bailey, Donald E; Docherty, Sharron L; Whitney, Joanne D; Musil, Carol M; Dougherty, Cynthia M; McCloskey, Donna J; Austin, Joan K; Grady, Patricia A

    2017-05-01

    The purpose of this article is to describe the outcomes of a collaborative initiative to share data across five schools of nursing in order to evaluate the feasibility of collecting common data elements (CDEs) and developing a common data repository to test hypotheses of interest to nursing scientists. This initiative extended work already completed by the National Institute of Nursing Research CDE Working Group that successfully identified CDEs related to symptoms and self-management, with the goal of supporting more complex, reproducible, and patient-focused research. Two exemplars describing the group's efforts are presented. The first highlights a pilot study wherein data sets from various studies by the represented schools were collected retrospectively, and merging of the CDEs was attempted. The second exemplar describes the methods and results of an initiative at one school that utilized a prospective design for the collection and merging of CDEs. Methods for identifying a common symptom to be studied across schools and for collecting the data dictionaries for the related data elements are presented for the first exemplar. The processes for defining and comparing the concepts and acceptable values, and for evaluating the potential to combine and compare the data elements are also described. Presented next are the steps undertaken in the second exemplar to prospectively identify CDEs and establish the data dictionaries. Methods for common measurement and analysis strategies are included. Findings from the first exemplar indicated that without plans in place a priori to ensure the ability to combine and compare data from disparate sources, doing so retrospectively may not be possible, and as a result hypothesis testing across studies may be prohibited. Findings from the second exemplar, however, indicated that a plan developed prospectively to combine and compare data sets is feasible and conducive to merged hypothesis testing. Although challenges exist in

  15. FEASIBILITY STUDY ON SOLID WASTE MANAGEMENT IN PORT ...

    African Journals Online (AJOL)

    In this study, solid waste management in Port Harcourt Metropolis, it causes, effect and possible solutions ranging from waste generation, storage, segregation, collection, treatment and disposal has been investigated. Primary and secondary sources of investigation were used to obtain the required data for the study.

  16. ASIPP remotely operated vehicle design (ROV) and feasibility study

    Science.gov (United States)

    Zhang, Tao; Zhang, Xuanchen; Wang, Lei; Pan, Hongtao; Zheng, Lei; Cheng, Yong; Wu, Jing

    2017-06-01

    The ROV is an important device for studying the underwater world. Thus, the ASIPP ROV is designed to meet this demand by ASIPP RH team. Through adding the wireless vision module, the performance of the robot is promoted in motion control, image collecting and so on. The rationality of the design and the effectiveness of the controller are validated by simulation and experimental study.

  17. A Community-based feasibility study of National Health Insurance ...

    African Journals Online (AJOL)

    In a community based study at Legon in 1997, a valuation method was used to assess the willingness of students on study leave to pay a percentage premium of their income ... The premium level was found to be influenced positively by financier, sex, age, income, and negatively by health expenditure, but not occupation.

  18. FEASIBILITY STUDIES FOR THE PANDA EXPERIMENT AT FAIR

    NARCIS (Netherlands)

    Biegun, A.

    PANDA, the detector to study AntiProton ANnihilations at DArmstadt, will be installed at the future international Facility for Anti-proton and Ion Research (FAIR) in Darmstadt, Germany. The PANDA physics program is oriented towards the studies of the strong interaction and hadron structure performed

  19. Feasibility studies of a Level-1 Tracking Trigger for ATLAS

    CERN Document Server

    Warren, M; Brenner, R; Konstantinidis, N; Sutton, M

    2009-01-01

    The existing ATLAS Level-1 trigger system is seriously challenged at the SLHC's higher luminosity. A hardware tracking trigger might be needed, but requires a detailed understanding of the detector. Simulation of high pile-up events, with various data-reduction techniques applied will be described. Two scenarios are envisaged: (a) regional readout - calorimeter and muon triggers are used to identify portions of the tracker; and (b) track-stub finding using special trigger layers. A proposed hardware system, including data reduction on the front-end ASICs, readout within a super-module and integrating regional triggering into all levels of the readout system, will be discussed.

  20. Feasible study on desiccant wheel with CO2 heat pump

    Science.gov (United States)

    Liu, Yefeng; Meng, Deren; Sun, Ying

    2017-12-01

    A kind of desiccant wheel with CO2 heat pump is proposed. The main features of this proposed system include: (1) there are two optional ways of desiccant dehumidification and cooling dehumidification; (2) for the subsystem of desiccant dehumidification process, the air regeneration process occurs inside a closed loop, and a CO2 heat pump is utilized inside this loop for air regeneration, which has the potential to significantly reduce energy consumption compared to a traditional regeneration process. The operating performance of the system is simulated and analysed. Compared to the traditional vapor compression air conditioning system, the hybrid system can save approximately 50% to 90% of energy.

  1. Feasibility study: Application of RCM techniques for substation maintenance at the Bonneville Power Administration

    Energy Technology Data Exchange (ETDEWEB)

    Purucker, S.L.; Tonn, B.E.; Goeltz, R.T.; James, R.D.; Kercel, S.; Rizy, D.T.; Simpson, M.L.; Van Dyke, J.W.

    1992-05-28

    This feasibility study examines reliability centered maintenance (RCM) as it applies to Bonneville Power Administrations (BPA) substation maintenance program. Reliability techniques are examined in evaluated. Existing BPA equipment maintenance procedures are documented. Equipment failure history is considered. Economic impacts are estimated. Various equipment instrumentation methods are reviewed. Based on this analysis a prototype system is proposed. The prototype will be implemented in two phases. Phase 1 is to be completed in 1992, it includes instrumenting one power transformer and one oil circuit breaker. Software development will focus on displaying data. Phase 2 is to be completed the following year. The remaining transformers and breakers will be instrumented during the second phase. Software development will focus on predictive maintenance techniques and maintenance decision support.

  2. Remedial investigation/feasibility study for the David Witherspoon, Inc., 901 Site, Knoxville, Tennessee: Volume 1

    International Nuclear Information System (INIS)

    1996-10-01

    This remedial investigation (RI)/feasibility study (FS) supports the selection of remedial actions for the David Witherspoon, Inc. 901 Maryville Pike Site in Knoxville, Tennessee. Operations at the site, used as a recycling center, have resulted in past, present, and potential future releases of hazardous substances in to the environment. This Site is a Tennessee Superfund site. A phased approach was planned to (1) gather existing data from previous investigations managed by the Tenn. Dept. of Environment and Conservation; (2) perform a preliminary RI, including risk assessments, and an FS with existing data to identify areas where remedial action may be necessary; (3) gather additional field data to adequately define the nature and extent of risk-based contaminants that present identifiable threats to human and/or ecological receptors; and (4) develop remedial action alternatives to reduce risks to acceptable levels

  3. Remedial investigation/feasibility study for the David Witherspoon, Inc., 901 Site, Knoxville, Tennessee: Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    This remedial investigation (RI)/feasibility study (FS) supports the selection of remedial actions for the David Witherspoon, Inc. 901 Maryville Pike Site in Knoxville, Tennessee. Operations at the site, used as a recycling center, have resulted in past, present, and potential future releases of hazardous substances in to the environment. This Site is a Tennessee Superfund site. A phased approach was planned to (1) gather existing data from previous investigations managed by the Tenn. Dept. of Environment and Conservation; (2) perform a preliminary RI, including risk assessments, and an FS with existing data to identify areas where remedial action may be necessary; (3) gather additional field data to adequately define the nature and extent of risk-based contaminants that present identifiable threats to human and/or ecological receptors; and (4) develop remedial action alternatives to reduce risks to acceptable levels.

  4. Feasibility study of a periodic arc compressor in the presence of coherent synchrotron radiation

    International Nuclear Information System (INIS)

    Di Mitri, S.

    2016-01-01

    The advent of short electron bunches in high brightness linear accelerators has raised the awareness of the accelerator community to the degradation of the beam transverse emittance by coherent synchrotron radiation (CSR) emitted in magnetic bunch length compressors, transfer lines and turnaround arcs. Beam optics control has been proposed to mitigate that CSR effect. In this article, we enlarge on the existing literature by reviewing the validity of the linear optics approach in a periodic, achromatic arc compressor. We then study the dependence of the CSR-perturbed emittance to beam optics, mean energy, and bunch charge. The analytical findings are compared with particle tracking results. Practical considerations on CSR-induced energy loss and nonlinear particle dynamics are included. As a result, we identify the range of parameters that allows feasibility of an arc compressor for driving, for example, a free electron laser or a linear collider.

  5. Feasibility study on the least square method for fitting non-Gaussian noise data

    Science.gov (United States)

    Xu, Wei; Chen, Wen; Liang, Yingjie

    2018-02-01

    This study is to investigate the feasibility of least square method in fitting non-Gaussian noise data. We add different levels of the two typical non-Gaussian noises, Lévy and stretched Gaussian noises, to exact value of the selected functions including linear equations, polynomial and exponential equations, and the maximum absolute and the mean square errors are calculated for the different cases. Lévy and stretched Gaussian distributions have many applications in fractional and fractal calculus. It is observed that the non-Gaussian noises are less accurately fitted than the Gaussian noise, but the stretched Gaussian cases appear to perform better than the Lévy noise cases. It is stressed that the least-squares method is inapplicable to the non-Gaussian noise cases when the noise level is larger than 5%.

  6. Focused feasibility study of engineered barriers for waste management units in the 200 areas

    International Nuclear Information System (INIS)

    1996-08-01

    This Focused Feasibility Study (FFS) evaluates a total of four conceptual barrier designs for different types of waste sites. The Hanford Barrier, the Modified RCRA Subtitle C Barrier, and the Modified RCRA Subtitle D Barrier are being considered as the baseline design for the purpose of the FFS evaluation. A fourth barrier design, the Standard RCRA Subtitle C Barrier, is also evaluated in this FFS; it is commonly applied at other waste sites across the country. These four designs provide a range of cover options to minimize health and environmental risks associated with a site and specific waste categories for active design life periods of 30, 100, 500, and 1,000 years. Design criteria for the 500 and 1,000-year design life barriers include design performance to extend beyond active institutional control and monitoring periods

  7. Scout fourth stage attitude and velocity control (AVC) system feasibility study

    Science.gov (United States)

    Byars, L. B.

    1975-01-01

    The feasibility of incorporating a guidance system in the Scout fourth stage to achieve a significant improvement in expected payload delivery accuracy is studied. The technical investigations included the determination of the AVC equipment performance requirements, establishment of qualification and acceptance test levels, generation of layouts illustrating design approaches for the upper D and payload transition sections to incorporate the hardware, and the preparation of a vendor bid package. Correction concepts, utilizing inertial velocity and attitude, were identified and evaluated. Fourth stage attitude adjustments as determined from inertial velocity variation through the first three stages and a final velocity correction based upon the measured in-plane component errors at injection were employed. Results show radical reductions in apogee-perigee deviations.

  8. Feasibility of multi-sector policy measures that create activity-friendly environments for children: results of a Delphi study

    Directory of Open Access Journals (Sweden)

    Aarts Marie-Jeanne

    2011-12-01

    Full Text Available Abstract Background Although multi-sector policy is a promising strategy to create environments that stimulate physical activity among children, little is known about the feasibility of such a multi-sector policy approach. The aims of this study were: to identify a set of tangible (multi-sector policy measures at the local level that address environmental characteristics related to physical activity among children; and to assess the feasibility of these measures, as perceived by local policy makers. Methods In four Dutch municipalities, a Delphi study was conducted among local policy makers of different policy sectors (public health, sports, youth and education, spatial planning/public space, traffic and transportation, and safety. In the first Delphi round, respondents generated a list of possible policy measures addressing three environmental correlates of physical activity among children (social cohesion, accessibility of facilities, and traffic safety. In the second Delphi round, policy makers weighted different feasibility aspects (political feasibility, cultural/community acceptability, technical feasibility, cost feasibility, and legal feasibility and assessed the feasibility of the policy measures derived from the first round. The third Delphi round was aimed at reaching consensus by feedback of group results. Finally, one overall feasibility score was calculated for each policy measure. Results Cultural/community acceptability, political feasibility, and cost feasibility were considered most important feasibility aspects. The Delphi studies yielded 16 feasible policy measures aimed at physical and social environmental correlates of physical activity among children. Less drastic policy measures were considered more feasible, whereas environmental policy measures were considered less feasible. Conclusions This study showed that the Delphi technique can be a useful tool in reaching consensus about feasible multi-sector policy measures. The

  9. Feasibility Study on Solar lighting for Poverty Alleviation in Rural ...

    African Journals Online (AJOL)

    This study was commissioned to assess the practicality of disseminating solar home lighting systems to remote rural villages in southern Tanzania, to identify specific barriers that may hinder adopting of such systems by wider communities in rural areas and recommend practical counteractive measures. The analysis used ...

  10. Lambda polarization feasibility study at BM@N

    Directory of Open Access Journals (Sweden)

    Suvarieva Dilyna

    2017-01-01

    In this analysis, the possibility to measure at BM@N the polarization of the lightest strange hyperon Λ is studied in Monte Carlo event samples produced with the DCM-QGSM generator. It is shown that the detector will allow to measure Λ polarization with a precision required to check the model predictions.

  11. Feasibility of a responsive business scorecard - a pilot study

    NARCIS (Netherlands)

    van der Woerd, K.F.; van den Brink, T.W.M.

    2004-01-01

    Several authors have pointed at opportunities to develop the well-established Business Balanced Scorecard into a Scorecard that enables companies to integrate sustainability into their strategy. Recent case studies and research experiences show that social and environmental targets are more widely

  12. Insect-Based Vision for Autonomous Vehicles: A Feasibility Study

    Science.gov (United States)

    Srinivasan, Mandyam V.

    1999-01-01

    The aims of the project were to use a high-speed digital video camera to pursue two questions: (1) To explore the influence of temporal imaging constraints on the performance of vision systems for autonomous mobile robots; (2) To study the fine structure of insect flight trajectories in order to better understand the characteristics of flight control, orientation and navigation.

  13. Feasibility study of dish/stirling power systems in Turkey

    Science.gov (United States)

    Zilanlı, Gülin Acarol; Eray, Aynur

    2017-06-01

    In this study, two different commercial dish/stirling systems, SES (Stirling Energy Systems) and WGA-ADDS (WGAssociates - Advanced Dish Development System), are modeled using the "System Advisor Model" (SAM) modeling software in designated settlement areas. Both systems are modeled for the US state of Albuquerque, where they were designed, and Turkish provinces of Ankara, Van, Muğla, Mersin, Urfa and Konya. At first, the dish/stirling system is optimized according to the power output values and the system loss parameters. Then, the layout of the solar field is designed with an installed capacity of 600kW both of SES and WGA-ADDS systems, Upon securing the most suitable layout, the system is modeled for the aforementioned settlements using the optimum output values gathered from the parametric analysis. As a result of the simulation studies, the applicability of this model is discussed according to the power output and the efficiency. Although Turkey is located in an area called "the sun belt" where solar energy technologies can be used, there is no advanced application of these systems. This study aims to discuss the application of these systems in detail and to pave the way for future studies in this field.

  14. Feasibility study of algae-based CO2 capture

    Science.gov (United States)

    The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being undertaken to eval...

  15. Feasibility study of algae-based Carbon Dioxide capture

    Science.gov (United States)

    SUMMARY: The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being undertak...

  16. The interpretation of remote sensing : a feasibility study

    NARCIS (Netherlands)

    Dulk, den J.A.

    1989-01-01

    This thesis describes research done to ascertain the possibilities and limitations of the use of remote sensing observations for agriculture. The topic is defined in Chapter 1. In Chapter 2 the possible applicability of certain existing models for this study is examined. Three models are

  17. A feasibility study on identification of Basmati (aromatic) rice using ...

    Indian Academy of Sciences (India)

    Rice areas in India are being mapped for acreage estimation using Synthetic Aperture Radar (SAR) data under forecasting agricultural output using space, agrometeorology and land-based observations. (FASAL) program for over a decade now. Under this study, an attempt was made to segregate rice areas based on ...

  18. A hingeless rotor XV-15 design integration feasibility study. Volume 1: Engineering design studies

    Science.gov (United States)

    Magee, J. P.; Alexander, H. R.

    1978-01-01

    A design integration feasibility study was carried out to investigate what modifications to the basic XV-15 were necessary to accomplish a flight demonstration of the XV-15 with a Boeing hingeless rotor. Also investigated were additional modifications which would exploit the full capability provided by the combination of the new rotor and the existing T53 engine. An evaluation of the aircraft is presented and the data indicate improved air vehicle performance, acceptable aeroelastic margins, lower noise levels and improved flying qualities compared with the XV-15 aircraft. Inspection of the rotor system data provided shows an essentially unlimited life rotor for the flight spectrum anticipated for the XV-15.

  19. 14-plex Feasibility Report

    Energy Technology Data Exchange (ETDEWEB)

    Kotongan, Victoria Hazel [Native Village of Unalakleet

    2013-06-21

    The Native Village of Unalakleet project was a feasibility study for a retrofit of a “tribally owned” three story, 14 apartment complex located in Unalakleet, Alaska. The program objective and overall goal was to create a plan for retrofitting to include current appraised value and comparable costs of new construction to determine genuine feasibility as low-income multi-family housing for tribal members.

  20. Final Report Feasibility Study for the California Wave Energy Test Center (CalWavesm)

    Energy Technology Data Exchange (ETDEWEB)

    Blakeslee, Samuel Norman [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States). Inst. for Advanced Technology and Public Policy; Toman, William I. [Protean Wave Energy Ltd., Los Osos, CA (United States); Williams, Richard B. [Leidos Maritime Solutions, Reston, VA (United States); Davy, Douglas M. [CH2M, Sacramento, CA (United States); West, Anna [Kearns and West, Inc., San Francisco, CA (United States); Connet, Randy M. [Omega Power Engineers, LLC, Anaheim, CA (United States); Thompson, Janet [Kearns and West, Inc., San Francisco, CA (United States); Dolan, Dale [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States); Baltimore, Craig [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States); Jacobson, Paul [Electric Power Research Inst. (EPRI), Knoxville, TN (United States); Hagerman, George [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States); Potter, Chris [California Natural Resources Agency, Sacramento, CA (United States); Dooher, Brendan [Pacific Gas and Electric Company, San Francisco, CA (United States); Wendt, Dean [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States); Sheppard, Colin [Humboldt State Univ., Arcata, CA (United States); Harris, Andrew [Humboldt State Univ., Arcata, CA (United States); Lawson, W. Graham [Power Delivery Consultants, Inc., Albany, NY (United States)

    2017-07-31

    The California Wave Energy Test Center (CalWave) Feasibility Study project was funded over multiple phases by the Department of Energy to perform an interdisciplinary feasibility assessment to analyze the engineering, permitting, and stakeholder requirements to establish an open water, fully energetic, grid connected, wave energy test center off the coast of California for the purposes of advancing U.S. wave energy research, development, and testing capabilities. Work under this grant included wave energy resource characterization, grid impact and interconnection requirements, port infrastructure and maritime industry capability/suitability to accommodate the industry at research, demonstration and commercial scale, and macro and micro siting considerations. CalWave Phase I performed a macro-siting and down-selection process focusing on two potential test sites in California: Humboldt Bay and Vandenberg Air Force Base. This work resulted in the Vandenberg Air Force Base site being chosen as the most favorable site based on a peer reviewed criteria matrix. CalWave Phase II focused on four siting location alternatives along the Vandenberg Air Force Base coastline and culminated with a final siting down-selection. Key outcomes from this work include completion of preliminary engineering and systems integration work, a robust turnkey cost estimate, shoreside and subsea hazards assessment, storm wave analysis, lessons learned reports from several maritime disciplines, test center benchmarking as compared to existing international test sites, analysis of existing applicable environmental literature, the completion of a preliminary regulatory, permitting and licensing roadmap, robust interaction and engagement with state and federal regulatory agency personnel and local stakeholders, and the population of a Draft Federal Energy Regulatory Commission (FERC) Preliminary Application Document (PAD). Analysis of existing offshore oil and gas infrastructure was also performed

  1. National Biomedical Tracer Facility planning and feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Ketchem, L. (ed.); Holmes, R.A.

    1991-03-02

    Since its establishment in mid-1989, the DOE Office of Isotope Production and Distribution has examined the recommendations of the Los Alamos Report and the Health and Environmental Research Advisory Committee (HERAC) Report. The main recommendation from these deliberations is for the DOE to establish an accelerator dedicated to biomedical radioisotope production. Representatives of the nuclear medicine community, meeting at a DOE workshop in August 1988, evaluated present and future needs for accelerator-produced radioisotopes. Workshop participants concluded in the Los Alamos Report that approximately 90% of their radioisotope needs could be met by a machine that delivers a 70 million electronic volts (MeV), 500-microamp proton beam. The HERAC Report provides more quantification of radioisotope needs, and included isotopes that can be produced effectively only at higher energies. An accelerator facility with an upper energy limit of 100 MeV and beam current of 750 to 1,000 microamps, could produce all important accelerator- produced radioisotopes in current use, as well as those isotopes judged to have future potential value in medical research and clinical practice. We therefore recommend that the NBTF have a 100-MeV proton beam accelerator with an extracted beam current of 750 to 1,000 microamps.

  2. National Biomedical Tracer Facility planning and feasibility study. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Ketchem, L. [ed.; Holmes, R.A.

    1991-03-02

    Since its establishment in mid-1989, the DOE Office of Isotope Production and Distribution has examined the recommendations of the Los Alamos Report and the Health and Environmental Research Advisory Committee (HERAC) Report. The main recommendation from these deliberations is for the DOE to establish an accelerator dedicated to biomedical radioisotope production. Representatives of the nuclear medicine community, meeting at a DOE workshop in August 1988, evaluated present and future needs for accelerator-produced radioisotopes. Workshop participants concluded in the Los Alamos Report that approximately 90% of their radioisotope needs could be met by a machine that delivers a 70 million electronic volts (MeV), 500-microamp proton beam. The HERAC Report provides more quantification of radioisotope needs, and included isotopes that can be produced effectively only at higher energies. An accelerator facility with an upper energy limit of 100 MeV and beam current of 750 to 1,000 microamps, could produce all important accelerator- produced radioisotopes in current use, as well as those isotopes judged to have future potential value in medical research and clinical practice. We therefore recommend that the NBTF have a 100-MeV proton beam accelerator with an extracted beam current of 750 to 1,000 microamps.

  3. Feasibility study of a fission-suppressed tokamak fusion breeder

    International Nuclear Information System (INIS)

    Moir, R.W.; Lee, J.D.; Neef, W.S.

    1984-12-01

    The preliminary conceptual design of a tokamak fissile fuel producer is described. The blanket technology is based on the fission suppressed breeding concept where neutron multiplication occurs in a bed of 2 cm diameter beryllium pebbles which are cooled by helium at 50 atmospheres pressure. Uranium-233 is bred in thorium metal fuel elements which are in the form of snap rings attached to each beryllium pebble. Tritium is bred in lithium bearing material contained in tubes immersed in the pebble bed and is recovered by a purge flow of helium. The neutron wall load is 3 MW/m 2 and the blanket material is ferritic steel. The net fissile breeding ratio is 0.54 +- 30% per fusion reaction. This results in the production of 4900 kg of 233 U per year from 3000 MW of fusion power. This quantity of fuel will provide makeup fuel for about 12 LWRs of equal thermal power or about 18 1 GW/sub e/ LWRs. The calculated cost of the produced uranium-233 is between $23/g and $53/g or equivalent to $10/kg to $90/kg of U 3 O 8 depending on government financing or utility financing assumptions. Additional topics discussed in the report include the tokamak operating mode (both steady state and long pulse considered), the design and breeding implications of using a poloidal divertor for impurity control, reactor safety, the choice of a tritium breeder, and fuel management

  4. National Biomedical Tracer Facility planning and feasibility study

    International Nuclear Information System (INIS)

    Ketchem, L.; Holmes, R.A.

    1991-01-01

    Since its establishment in mid-1989, the DOE Office of Isotope Production and Distribution has examined the recommendations of the Los Alamos Report and the Health and Environmental Research Advisory Committee (HERAC) Report. The main recommendation from these deliberations is for the DOE to establish an accelerator dedicated to biomedical radioisotope production. Representatives of the nuclear medicine community, meeting at a DOE workshop in August 1988, evaluated present and future needs for accelerator-produced radioisotopes. Workshop participants concluded in the Los Alamos Report that approximately 90% of their radioisotope needs could be met by a machine that delivers a 70 million electronic volts (MeV), 500-microamp proton beam. The HERAC Report provides more quantification of radioisotope needs, and included isotopes that can be produced effectively only at higher energies. An accelerator facility with an upper energy limit of 100 MeV and beam current of 750 to 1,000 microamps, could produce all important accelerator- produced radioisotopes in current use, as well as those isotopes judged to have future potential value in medical research and clinical practice. We therefore recommend that the NBTF have a 100-MeV proton beam accelerator with an extracted beam current of 750 to 1,000 microamps

  5. Mental health morbidity among people subject to immigration detention in the UK: a feasibility study.

    Science.gov (United States)

    Sen, P; Arugnanaseelan, J; Connell, E; Katona, C; Khan, A A; Moran, P; Robjant, K; Slade, K; Tan, J; Widyaratna, K; Youd, J; Forrester, A

    2017-06-22

    The UK has one of the largest systems of immigration detention in Europe.. Those detained include asylum-seekers and foreign national prisoners, groups with a higher prevalence of mental health vulnerabilities compared with the general population. In light of little published research on the mental health status of detainees in immigration removal centres (IRCs), the primary aim of this study was to explore whether it was feasible to conduct psychiatric research in such a setting. A secondary aim was to compare the mental health of those seeking asylum with the rest of the detainees. Cross-sectional study with simple random sampling followed by opportunistic sampling. Exclusion criteria included inadequate knowledge of English and European Union nationality. Six validated tools were used to screen for mental health disorders including developmental disorders like Personality Disorder, Attention Deficit Hyperactivity Disorder (ADHD), Autistic Spectrum Disorder (ASD) and Intellectual Disability, as well as for needs assessment. These were the MINI v6, SAPAS, AQ-10, ASRS, LDSQ and CANFOR. Demographic data were obtained using a participant demographic sheet. Researchers were trained in the use of the screening battery and inter-rater reliability assessed by joint ratings. A total of 101 subjects were interviewed. Overall response rate was 39%. The most prevalent screened mental disorder was depression (52.5%), followed by personality disorder (34.7%) and post-traumatic stress disorder (20.8%). 21.8% were at moderate to high suicidal risk. 14.9 and 13.9% screened positive for ASD and ADHD, respectively. The greatest unmet needs were in the areas of intimate relationships (76.2%), psychological distress (72.3%) and sexual expression (71.3%). Overall presence of mental disorder was comparable with levels found in prisons. The numbers in each group were too small to carry out any further analysis. It is feasible to undertake a psychiatric morbidity survey in an IRC

  6. FEASIBILITY STUDY II OF A MUON BASED NEUTRINO SOURCE.

    Energy Technology Data Exchange (ETDEWEB)

    GALLARDO,J.C.; OZAKI,S.; PALMER,R.B.; ZISMAN,M.

    2001-06-30

    The concept of using a muon storage ring to provide a well characterized beam of muon and electron neutrinos (a Neutrino Factory) has been under study for a number of years now at various laboratories throughout the world. The physics program of a Neutrino Factoryis focused on the relatively unexplored neutrino sector. In conjunction with a detector located a suitable distance from the neutrino source, the facility would make valuable contributions to the study of neutrino masses and lepton mixing. A Neutrino Factory is expected to improve the measurement accuracy of sin{sup 2}(2{theta}{sub 23}) and {Delta}m{sup 2}{sub 32} and provide measurements of sin{sup 2}(2{theta}{sub 13}) and the sign of {Delta}m{sup 2}{sub 32}. It may also be able to measure CP violation in the lepton sector.

  7. Feasibility Study on RI Application to a Biochip

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Hyun; Gwon, Hui Jeong; Choi, Sang Mu; Yang, Seung Dae; Kim, Swang Wook; Shin, Jun Hwa; Ko, Kyong Cheol; Jang, Seung Ho

    2007-07-15

    Microarrays have recently become a precious research tool for proteomics and clinical investigation. Their applications to the diagnosis of a disease have emerged as a significant promise for medical advances. In this study, we report on an efficient strategy for the detection of phosphorylation of a substrate catalysed by kinase, using radioisotope detection technique for a protein bio chip. This technique does not employ the use of the blocking step which is commonly used in conventional methods to prevent non-specific binding. It was found that the usage of a radioisotope detection technique has the advantages of being highly sensitive and time saving when compared to other conventional methods. The results can be applied when using radioisotope detection technique to develop bio chips to determine the activity of a protein kinase. Further, it can be a useful tool for a high throughput screening and for studying protein-protein interactions.

  8. Feasibility Study on Cutting HTPB Propellants with Abrasive Water Jet

    Science.gov (United States)

    Jiang, Dayong; Bai, Yun

    2018-01-01

    Abrasive water jet is used to carry out the experiment research on cutting HTPB propellants with three components, which will provide technical support for the engineering treatment of waste rocket motor. Based on the reliability theory and related scientific research results, the safety and efficiency of cutting sensitive HTPB propellants by abrasive water jet were experimentally studied. The results show that the safety reliability is not less than 99.52% at 90% confidence level, so the safety is adequately ensured. The cooling and anti-friction effect of high-speed water jet is the decisive factor to suppress the detonation of HTPB propellant. Compared with pure water jet, cutting efficiency was increased by 5% - 87%. The study shows that abrasive water jets meet the practical use for cutting HTPB propellants.

  9. Feasibility Study on RI Application to a Biochip

    International Nuclear Information System (INIS)

    Park, Sang Hyun; Gwon, Hui Jeong; Choi, Sang Mu; Yang, Seung Dae; Kim, Swang Wook; Shin, Jun Hwa; Ko, Kyong Cheol; Jang, Seung Ho

    2007-07-01

    Microarrays have recently become a precious research tool for proteomics and clinical investigation. Their applications to the diagnosis of a disease have emerged as a significant promise for medical advances. In this study, we report on an efficient strategy for the detection of phosphorylation of a substrate catalysed by kinase, using radioisotope detection technique for a protein bio chip. This technique does not employ the use of the blocking step which is commonly used in conventional methods to prevent non-specific binding. It was found that the usage of a radioisotope detection technique has the advantages of being highly sensitive and time saving when compared to other conventional methods. The results can be applied when using radioisotope detection technique to develop bio chips to determine the activity of a protein kinase. Further, it can be a useful tool for a high throughput screening and for studying protein-protein interactions

  10. Dental optical tomography with upconversion nanoparticles—a feasibility study

    Science.gov (United States)

    Long, Feixiao; Intes, Xavier

    2017-06-01

    Upconversion nanoparticles (UCNPs) have the unique ability to emit multiple colors upon excitation by near-infrared (NIR) light. Herein, we investigate the potential use of UCNPs as contrast agents for dental optical tomography, with a focus on monitoring the status of fillings after dental restoration. The potential of performing tomographic imaging using UCNP emission of visible or NIR light is established. This in silico and ex vivo study paves the way toward employing UCNPs as theranostic agents for dental applications.

  11. Feasibility Study: Ductless Hydronic Distribution Systems with Fan Coil Delivery

    Energy Technology Data Exchange (ETDEWEB)

    Springer, D.; Dakin, B.; Backman, C.

    2012-07-01

    The primary objectives of this study are to estimate potential energy savings relative to conventional ducted air distribution, and to identify equipment requirements, costs, and barriers with a focus on ductless hydronic delivery systems that utilize water-to-air terminal units in each zone. Results indicate that annual heating and cooling energy use can be reduced by up to 27% assuming replacement of the conventional 13 SEER heat pump and coil with a similarly rated air-to-water heat pump.

  12. Feasibility study of electromechanical cylinder drivetrain for offshore mechatronic systems

    DEFF Research Database (Denmark)

    Hagen, D.; Pawlus, W.; Ebbesen, M. K.

    2017-01-01

    Currently, there is an increasing focus on the environmental impact and energy consumption of the oil and gas industry. In offshore drilling equipment, electric motors tend to replace traditionally used hydraulic motors, especially in rotational motion control applications. However, force densities...... cylinder drivetrain. The simulation results are analyzed and discussed together with a literature study regarding advantages and disadvantages of the proposed solution considering the design criteria of offshore drilling equipment. It is concluded that the selected drivetrain can only satisfy the static...

  13. Feasibility study of a TIMEPIX detector for mammography applications

    Science.gov (United States)

    Ávila, Carlos A.; Mendoza, Luis M.; Roque, Gerardo A.; Loaiza, Leonardo; Racedo, Jorge; Rueda, Roberto

    2017-11-01

    We present a comparison study of two X-ray systems for mammography imaging. One is a SELENIA clinical system and the second is a TIMEPIX based system. The aim of the study is to determine the capability of a TIMEPIX detector for mammography applications. We first compare signal to noise ratio (SNR) of X-ray images of Al2O3 spheres with diameters of 0.16mm, 0.24mm and 0.32mm, of a commercial mammography accreditation phantom CIRS015, obtained with each system. Then, we make a similar comparison for a second phantom built with Hydroxyapatite crystals with different morphology and sizes ranging between 0.15mm and 0.83mm, which are embedded within the same block of PMMA of the CIRS015 phantom. Our study allows us to determine the minimum size of Al2O3 spheres on the order of 240μm, with 33% lower SNR for the TIMEPIX system as compared to the SELENIA system. When comparing the images of Hydroxyapatite crystals from both systems, the minimum size observed is about 300μm, with 23% lower SNR for TIMEPIX.

  14. Feasibility study of archaeological structures scanning by muon tomography

    Energy Technology Data Exchange (ETDEWEB)

    Gómez, H.; Katsanevas, S.; Tonazzo, A. [Laboratoire Astroparticule et Cosmologie (APC) - Université Paris 7. Paris (France); Carloganu, C.; Niess, V. [Laboratoire de Physique Corpusculaire (LPC) - Université Blaise Pascal. Clermont - Ferrand (France); Gibert, D. [Géosciences Rennes - Université de Rennes 1. Rennes (France); Marteau, J. [Institute de Physique Nucléaire de Lyon (IPNL) - Université de Lyon (UCBL). Lyon (France)

    2015-08-17

    One of the main concerns in archaeology is to find of a method to study precisely archaeological structures in the least invasive way possible to avoid damage. The requirement of preserving the structures integrity prevents, in the case of pyramids or tumuli, the study of any internal structure (halls or tombs) which are not reachable by existing corridors. One non-invasive method is the muon tomography. By placing a detector which allows to register the muon direction after the structure, it is possible to have an idea of its composition based on the attenuation of the muon flux, which depends on the material length and density that muons have crossed. This technique, alone or together with other exploration techniques as seismic tomography or electrical resistivity tomography, can provide useful information about the internal structure of the archaeological form that can not be obtained by conventional archaeological methods. In this work, the time measurement necessary to obtain a significant result about the composition of an archaeological structure is estimated. To do that, a Monte Carlo simulation framework based on the MUSIC software, properly tuned for this study, has been developed. The particular case of the Kastas Amfipoli Macedonian tumulus has been considered to perform the simulations.

  15. Longitudinal study of the feasibility of using ecological momentary assessment to study teacher stress: Objective and self-reported measures.

    Science.gov (United States)

    McIntyre, Teresa M; McIntyre, Scott E; Barr, Christopher D; Woodward, Phillip S; Francis, David J; Durand, Angelia C; Mehta, Paras; Kamarck, Thomas W

    2016-10-01

    There is a lack of comprehensive research on Ecological Momentary Assessment (EMA) feasibility to study occupational stress, especially its long-term sustainability. EMA application in education contexts has also been sparse. This study investigated the feasibility of using EMA to study teacher stress over 2 years using both objective compliance data and a self-reported feasibility survey. It also examined the influence of individual and school factors on EMA feasibility. Participants were 202 sixth through eighth grade teachers from 22 urban middle schools in the southern United States. EMA was implemented via an iPod-based Teacher Stress Diary (TSD). Teachers recorded demands, stress responses, and resources during 12 days (6 waves) over 2 years. Feasibility was assessed via compliance data generated by the TSD (e.g., entry completion) and an EMA Feasibility Survey of self-reported user-friendliness and EMA interference. The results showed high compliance regarding entry and item completion, and completion time, which was sustained over time. User-friendliness was appraised as very high and EMA interference as low. Initial difficulties regarding timing and length of assessments were addressed via EMA method refinement, resulting in improved feasibility. Teachers' ethnicity, age, marital status, grade/course taught, class size, class load, and daily workload impacted feasibility. The results supported the feasibility of using EMA to study work stress longitudinally and the value of continued feasibility monitoring. They also support EMA use to study teacher stress and inform EMA implementation in schools. Some teacher and school factors need to be taken into consideration when deciding on EMA implementation in education contexts. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  16. Smartphone-Based Cardiac Rehabilitation Program: Feasibility Study.

    Science.gov (United States)

    Chung, Heewon; Ko, Hoon; Thap, Tharoeun; Jeong, Changwon; Noh, Se-Eung; Yoon, Kwon-Ha; Lee, Jinseok

    2016-01-01

    We introduce a cardiac rehabilitation program (CRP) that utilizes only a smartphone, with no external devices. As an efficient guide for cardiac rehabilitation exercise, we developed an application to automatically indicate the exercise intensity by comparing the estimated heart rate (HR) with the target heart rate zone (THZ). The HR is estimated using video images of a fingertip taken by the smartphone's built-in camera. The introduced CRP app includes pre-exercise, exercise with intensity guidance, and post-exercise. In the pre-exercise period, information such as THZ, exercise type, exercise stage order, and duration of each stage are set up. In the exercise with intensity guidance, the app estimates HR from the pulse obtained using the smartphone's built-in camera and compares the estimated HR with the THZ. Based on this comparison, the app adjusts the exercise intensity to shift the patient's HR to the THZ during exercise. In the post-exercise period, the app manages the ratio of the estimated HR to the THZ and provides a questionnaire on factors such as chest pain, shortness of breath, and leg pain during exercise, as objective and subjective evaluation indicators. As a key issue, HR estimation upon signal corruption due to motion artifacts is also considered. Through the smartphone-based CRP, we estimated the HR accuracy as mean absolute error and root mean squared error of 6.16 and 4.30bpm, respectively, with signal corruption due to motion artifacts being detected by combining the turning point ratio and kurtosis.

  17. Smartphone-Based Cardiac Rehabilitation Program: Feasibility Study.

    Directory of Open Access Journals (Sweden)

    Heewon Chung

    Full Text Available We introduce a cardiac rehabilitation program (CRP that utilizes only a smartphone, with no external devices. As an efficient guide for cardiac rehabilitation exercise, we developed an application to automatically indicate the exercise intensity by comparing the estimated heart rate (HR with the target heart rate zone (THZ. The HR is estimated using video images of a fingertip taken by the smartphone's built-in camera. The introduced CRP app includes pre-exercise, exercise with intensity guidance, and post-exercise. In the pre-exercise period, information such as THZ, exercise type, exercise stage order, and duration of each stage are set up. In the exercise with intensity guidance, the app estimates HR from the pulse obtained using the smartphone's built-in camera and compares the estimated HR with the THZ. Based on this comparison, the app adjusts the exercise intensity to shift the patient's HR to the THZ during exercise. In the post-exercise period, the app manages the ratio of the estimated HR to the THZ and provides a questionnaire on factors such as chest pain, shortness of breath, and leg pain during exercise, as objective and subjective evaluation indicators. As a key issue, HR estimation upon signal corruption due to motion artifacts is also considered. Through the smartphone-based CRP, we estimated the HR accuracy as mean absolute error and root mean squared error of 6.16 and 4.30bpm, respectively, with signal corruption due to motion artifacts being detected by combining the turning point ratio and kurtosis.

  18. A robotic wheelchair trainer: design overview and a feasibility study

    Directory of Open Access Journals (Sweden)

    Marchal-Crespo Laura

    2010-08-01

    Full Text Available Abstract Background Experiencing independent mobility is important for children with a severe movement disability, but learning to drive a powered wheelchair can be labor intensive, requiring hand-over-hand assistance from a skilled therapist. Methods To improve accessibility to training, we developed a robotic wheelchair trainer that steers itself along a course marked by a line on the floor using computer vision, haptically guiding the driver's hand in appropriate steering motions using a force feedback joystick, as the driver tries to catch a mobile robot in a game of "robot tag". This paper provides a detailed design description of the computer vision and control system. In addition, we present data from a pilot study in which we used the chair to teach children without motor impairment aged 4-9 (n = 22 to drive the wheelchair in a single training session, in order to verify that the wheelchair could enable learning by the non-impaired motor system, and to establish normative values of learning rates. Results and Discussion Training with haptic guidance from the robotic wheelchair trainer improved the steering ability of children without motor impairment significantly more than training without guidance. We also report the results of a case study with one 8-year-old child with a severe motor impairment due to cerebral palsy, who replicated the single-session training protocol that the non-disabled children participated in. This child also improved steering ability after training with guidance from the joystick by an amount even greater than the children without motor impairment. Conclusions The system not only provided a safe, fun context for automating driver's training, but also enhanced motor learning by the non-impaired motor system, presumably by demonstrating through intuitive movement and force of the joystick itself exemplary control to follow the course. The case study indicates that a child with a motor system impaired by CP can

  19. Feasibility study of hydrogen generator with molten slag granulation

    Energy Technology Data Exchange (ETDEWEB)

    Akiyama, T.; Mizuochi, T. [Graduate School of Engineering, Osaka Pref. Univ., Sakai, Osaka (Japan); Yagi, J.I.; Nogami, H. [Inst. of Multidisciplinary Research for Advanced Materials, Tohoku Univ., Aobaku, Sendai (Japan)

    2004-02-01

    A huge amount of hot molten oxides, such as steelmaking slag and molten municipal waste, is discharged at present without heat recovery, in spite of its very high potential. For example, hot molten slag as a byproduct in the Japanese steelmaking industry, over 1723 K in temperature, reaches as much as 30 million tonnes annually. To recover heat of the viscous slag chemically, the strongly endothermic reaction CH{sub 4}+H{sub 2}O {yields} 3H{sub 2}+CO was selected and then the property of dry granulation of the molten slag by rotary cup atomizer (RCA) for expanding surface area of the slag was experimentally studied. The purpose of this paper was, therefore, to study slag granulation under various conditions for promoting heat exchange between slag and gas, in which the influence of the rotating speed and the shape of the cup on the slag drop size was mainly examined. The collected slag drops were correlated with operating conditions such as rotating speed, cup shape, etc. Most significantly, the molten slag was successfully granulated under the dry conditions without water impingement. The rotating speed of the cup influenced the diameter and shape of the slag drops very strongly. The higher rotating speed made the slag drops smaller, more spherical and uniform. Drops with 5 to 6 mm of average dimension were obtained at a rotating speed of 15 rps (900 rpm), and drops with about 1 mm at 50 rps (3000 rpm). In the former case, the shape of the obtained drops changed from spherical to ribbon-like. These results will be useful to establish new heat recovery processes with hydrogen generation from molten slag with many benefits. Energy analysis and cost evaluation were also conducted, to study the benefit of the proposed process. (orig.)

  20. Canine scent detection of canine cancer: a feasibility study

    Directory of Open Access Journals (Sweden)

    Dorman DC

    2017-10-01

    Full Text Available David C Dorman,1 Melanie L Foster,2 Katherine E Fernhoff,1 Paul R Hess2 1Department of Molecular and Biomedical Sciences, 2Department of Clinical Sciences, College of Veterinary Medicine, North Carolina State University, Raleigh, NC, USA Abstract: The scent detection prowess of dogs has prompted interest in their ability to detect cancer. The purpose of this study was to determine whether dogs could use olfactory cues to discriminate urine samples collected from dogs that did or did not have urinary tract transitional cell carcinoma (TCC, at a rate greater than chance. Dogs with previous scent training (n=4 were initially trained to distinguish between a single control and a single TCC-positive urine sample. All dogs acquired this task (mean =15±7.9 sessions; 20 trials/session. The next training phase used four additional control urine samples (n=5 while maintaining the one original TCC-positive urine sample. All dogs quickly acquired this task (mean =5.3±1.5 sessions. The last training phase used multiple control (n=4 and TCC-positive (n=6 urine samples to promote categorical training by the dogs. Only one dog was able to correctly distinguish multiple combinations of TCC-positive and control urine samples suggesting that it mastered categorical learning. The final study phase evaluated whether this dog would generalize this behavior to novel urine samples. However, during double-blind tests using two novel TCC-positive and six novel TCC-negative urine samples, this dog did not indicate canine TCC-positive cancer samples more frequently than expected by chance. Our study illustrates the need to consider canine olfactory memory and the use of double-blind methods to avoid erroneous conclusions regarding the ability of dogs to alert on specimens from canine cancer patients. Our results also suggest that sample storage, confounding odors, and other factors need to be considered in the design of future studies that evaluate the detection of

  1. Feasibility study of multipoint based laser alignment system for CLIC

    CERN Document Server

    Stern, G; Mainaud-Durand, H; Piedigrossi, D; Geiger, A

    2012-01-01

    CLIC (Compact LInear Collider) is a study for a future electron-positron collider that would allow physicists to explore a new energy region beyond the capabilities oftoday’s particle accelerators. Alignment is one of the major challenges within the CLIC study in order to achieve the high requirement of a multi-TeV center of mass colliding beam energy range (nominal 3 TeV). To reach this energy in a realistic and cost efficient scenario all accelerator components have to be aligned with an accuracy of 10 μm over a sliding window of 200 m. The demand for a straight line reference is so far based on stretched wires coupled with Wire Positioning Sensors (WPS). These solutions are currently further developed inorder to reduce the drawbacks which are mainly given by their costs and difficult implementation. However, it should be validated through inter-comparison with a solution ideally based on a different physical principle. Therefore, a new metrological approach is proposed using a laser beam as straight lin...

  2. Solar Feasibility Study May 2013 - San Carlos Apache Tribe

    Energy Technology Data Exchange (ETDEWEB)

    Rapp, Jim [Parametrix; Duncan, Ken [San Carlos Apache Tribe; Albert, Steve [Parametrix

    2013-05-01

    The San Carlos Apache Tribe (Tribe) in the interests of strengthening tribal sovereignty, becoming more energy self-sufficient, and providing improved services and economic opportunities to tribal members and San Carlos Apache Reservation (Reservation) residents and businesses, has explored a variety of options for renewable energy development. The development of renewable energy technologies and generation is consistent with the Tribe’s 2011 Strategic Plan. This Study assessed the possibilities for both commercial-scale and community-scale solar development within the southwestern portions of the Reservation around the communities of San Carlos, Peridot, and Cutter, and in the southeastern Reservation around the community of Bylas. Based on the lack of any commercial-scale electric power transmission between the Reservation and the regional transmission grid, Phase 2 of this Study greatly expanded consideration of community-scale options. Three smaller sites (Point of Pines, Dudleyville/Winkleman, and Seneca Lake) were also evaluated for community-scale solar potential. Three building complexes were identified within the Reservation where the development of site-specific facility-scale solar power would be the most beneficial and cost-effective: Apache Gold Casino/Resort, Tribal College/Skill Center, and the Dudleyville (Winkleman) Casino.

  3. Feasibility study of self-lubrication by chlorine implantation

    International Nuclear Information System (INIS)

    Akhajdenung, T.; Aizawa, T.; Yoshitake, M.; Mitsuo, A.

    2003-01-01

    Implantation of chlorine into titanium nitride (TiN) coating on the high-speed steel substrate has succeeded in significant reduction of wear rate and friction coefficient for original TiN under dry wear condition. Through precise investigation on the surface reaction in the wear track, in situ formation of oxygen-deficient titanium oxides was found to play a role as a lubricious oxide. In the present paper, this self-lubrication mechanism is further investigated for various wearing conditions. For wide range of sliding speed and normal load in the wear map, the wear volume of a counter material is actually reduced with comparison to the un-implanted TiN. Effect of the ion implantation dose on this self-lubrication mechanism is also studied for practical use. Some comments are made on further application of this self-lubrication to manufacturing

  4. Hycom Pre - Feasibility study. Final report[Hydrogen communities

    Energy Technology Data Exchange (ETDEWEB)

    Lacobazzi, A.; Mario, F di [ENEA, (Italy); Hasenauer, U. [Fraunhofer IS, (Germany); Joergensen, B.H.; Bromand Noergaard, P. [Risoe National Lab., (Denmark)

    2005-07-01

    The Quick-start Programme of the European Union Initiative for Growth identifies the hydrogen economy as one of the key areas for investment in the medium term (2004-2015). In this context the HyCOM (Hydrogen Communities) programme has been initiated. The main goal of this programme is the creation of a limited number of strategically sited stand-alone hydrogen communities producing hydrogen from various primary sources (mostly renewables) and using it for heat and electricity production and as fuel for vehicles. This report looks at the establishment of such hydrogen communities, analysing the main technical, economic, social, and environmental aspects as well as financial and regulatory barriers associated with the creation and operation of hydrogen communities. It also proposes a number of concepts for Hydrogen Communities and criteria with which a Hydrogen Community should be evaluated. The study is not in any way intended to be prescriptive. (ln)

  5. Emerging Applications Using Magnesium Alloy Powders: A Feasibility Study

    Science.gov (United States)

    Tandon, Rajiv; Madan, Deepak

    The use of powder metallurgy offers a potential processing route based on tailored compositions and unique microstructures to achieve high performance in magnesium alloys. This paper highlights recent advances in the production, qualification, and characterization of gas atomized AZ91E, WE43 and Elektron21 alloy powders. Transmission electron microscopy (TEM) was used to understand the bulk and surface structure of the atomized powder. The potential for using these magnesium alloy powders for emerging applications involves establishing compatibility with viable consolidation processes such as cold spray, laser assisted deposition, forging and extrusion. This study summarizes the preliminary results for various ongoing investigations using WE43 powder as an example. Results show that powder metallurgy processed WE43 results in comparable properties to those obtained from cast and wrought and offers potential for improvement.

  6. Assessment of colonic transit time using MRI: a feasibility study

    International Nuclear Information System (INIS)

    Buhmann, Sonja; Reiser, Maximilian F.; Lienemann, Andreas; Kirchhoff, Chlodwig; Ladurner, Roland; Mussack, Thomas

    2007-01-01

    The aim of this pilot study was to evaluate a new, non-invasive examination method using MRI for the quantification of the colonic transit time after oral administration of gadolinium-saline solution filled capsules. Healthy volunteers without previous or acute symptoms of gastrointestinal disorders were enrolled. After a 3-day diet for the standardization of gastrocolonic content the volunteers swallowed five Gd-DTPA/saline 0.9%-filledcapsules. Seven different concentrations of Gd-DTPA/saline 0.9% solution between 1:0 and 0:1 were tested in a dilution series. Following ingestion of capsules, coronal Flash T1 and True Fisp sequences using a 1.5 Tesla system were obtained at 0 h, 3 h, 6 h, 12 h, 24 h, 36 h and 60 h. Sequences were analyzed by two independent experts for locating the capsules. Overall colonic transit time was separately analyzed for both genders. Fifteen healthy volunteers (7 females, 8 males; mean age 34±13 years) were enrolled. The phantom study provided the best contrast in both the T1-and T2-weighted sequences defining a ratio of 1:10 for Gd-DTPA/saline 0.9% solution. The mean transit time accounted for 41±9 h in women and for 31±10 h in men. MRI is an adequate method for the assessment of colonic transit time offering the advantages of no exposure to radiation, short examination time, possible dynamic evaluation of the transit and the practicability in terms of a future adoption to clinical routine. (orig.)

  7. Feasibility study of autoignition process in heavy-oil reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Razaghi, S.; Kharrat, R. [Petroleum Univ. of Technology, Tehran (Iran, Islamic Republic of); Price, D. [Bolton Univ. (United States); Vossoughi, S. [Kansas Univ., KS (United States); Rashtchian, D. [Sharif Univ. of Technology, Tehran (Iran, Islamic Republic of)

    2005-11-01

    In situ combustion involves simultaneous heat and mass transfer in a multi-phase environment coupled with the chemical reactions of crude oil combustion. This study investigated the effect of oxygen content in order to determine optimal auto-ignition conditions for heavy oil reservoirs. Heavy oil samples mixed with silica sand or crushed carbonate rock and clay from southwest Iran were studied using a thermogravimetric analyzer (TGA) and differential scanning calorimeter (DSC) techniques. Non-isothermal experiments were carried out with various oxygen concentrations in the inlet gas. The oxygen concentration was stabilized at a level measured by an oxygen paramagnetic analyzer placed before the gas inlet. Oxygen concentrations in the exhaust gas of the TGA was measured. Another set of experiments showed the clay effect in the presence of silica sand on auto-ignition temperature, and a further set of experiments were conducted to show both carbonate and clay effect on auto-ignition temperatures. The initial reservoir temperature of the reservoir formation type and the percentage of oxygen content were the main parameters of the auto-ignition condition. It was noted that the presence of clay reduced the auto-ignition temperature for both carbonate and silica sand. It was suggested that this could have a major impact on front propagation in the matrix formation. It was concluded that auto-ignition was dependent on the percentage of oxygen in the oxygen-enriched air purge gas for both the silica sand and carbonate rock in the presence of clay. It was also noted that carbonate rock decomposed above 600 degrees C. It was determined that CO{sub 2} evolution observed above 600 degrees C in experiments in which carbonate rock was used as the substrate, was due to rock decomposition and not any residual oil or carbon residue reactions. 12 refs., 4 tabs., 18 figs.

  8. Experiences of a feasibility study of children with albinism in Zimbabwe: a discussion paper.

    Science.gov (United States)

    Taylor, Julie S; Lund, Patricia

    2008-08-01

    Feasibility studies are often a helpful prelude to constructing fundable research proposals. Where the intended research is in a foreign country, focuses on a vulnerable population, and is aggravated by political and pragmatic challenges, feasibility studies become essential. Albinism, a genetic condition of reduced melanin synthesis, is a major public health issue in southern Africa. Whilst much is known about the health needs of children with albinism, little is understood about how to address these effectively in low income countries. Further, the child care and protection needs of children with albinism are largely unexplored. Zimbabwe's current political and economic climate presents additional challenges to research on the topic. The technical, economic, legal, collaborative, operational, schedule and political feasibilities (acronym TELCOSP) to undertaking a study on children with albinism in Zimbabwe were explored over a six week period of fieldwork in the country. Using the TELSCOSP framework allowed a deconstruction of each challenge to provide innovative solutions. The economic and legal feasibility aspects presented some difficulties that will require flexibility and perseverance to overcome. With the assistance of the local communities and people with albinism in Zimbabwe, the obstacles appear surmountable. The feasibility study provided a productive framework for addressing potential challenges in studying the needs of Zimbabwe's children living with albinism.

  9. Acceptability and feasibility of the 'DASH for Asthma' intervention in a randomized controlled trial pilot study.

    Science.gov (United States)

    Blonstein, Andrea C; Lv, Nan; Camargo, Carlos A; Wilson, Sandra R; Buist, A Sonia; Rosas, Lisa G; Strub, Peg; Ma, Jun

    2016-08-01

    'DASH for Asthma' (n 90) was a 6-month randomized controlled trial that demonstrated potential benefits of a DASH (Dietary Approaches to Stop Hypertension) behavioural intervention for improving diet quality and asthma control by comparing intervention to usual care in adults with uncontrolled asthma. The present study examined acceptability and feasibility of the intervention from the perspective of intervention participants and lifestyle coaches. Grounded in Social Cognitive Theory, the 3-month intensive stage, including three individual and eight group sessions, focused on diet modifications and behavioural self-regulation. The 3-month maintenance stage contained telephone consultations. Participants and lifestyle coaches completed surveys including 5-point Likert scales and open-ended questions. We analysed data using descriptive and inductive content analyses. Forty-six intervention participants (survey response rate was 65-72 %) and two lifestyle coaches. Participants and lifestyle coaches were highly satisfied (all mean ratings >4) with individual and group sessions. Participants identified mastery of knowledge and skills (awareness, goal setting, self-monitoring, problem solving), social learning (class members sharing experiences and ideas) and good coaching skills (reflective listening, empathy, motivational counselling) as important contributors to self-efficacy and programme satisfaction. Participants also valued personalized feedback received in individual sessions. Lifestyle coaches viewed participant engagement as a facilitator to effective sessions. Finally, participants and lifestyle coaches identified food tasting as beneficial for observational learning and facilitation of participant engagement. High class attendance and self-monitoring rate also reflected the high engagement among participants. The DASH behavioural intervention was feasible and highly acceptable to participants with uncontrolled asthma and lifestyle coaches.

  10. Outpatient laparoscopic nerve-sparing radical hysterectomy: A feasibility study and analysis of perioperative outcomes.

    Science.gov (United States)

    Rendón, Gabriel J; Echeverri, Lina; Echeverri, Francisco; Sanz-Lomana, Carlos Millán; Ramirez, Pedro T; Pareja, Rene

    2016-11-01

    The goal of our study was to report on the feasibility of outpatient laparoscopic radical hysterectomy in patients with early-stage cervical cancer. We included all patients who underwent a laparoscopic radical hysterectomy at the Instituto de Cancerología - Las Americas in Medellin, Colombia, between January 2013 and July 2015. The control group was a similar cohort of patients who were admitted after their surgery. Seventy-six patients were included [outpatient (31) and admitted (45)]. There were no statistically significant differences between groups regarding age, clinical stage, histology, nodal count, need of adjuvant treatment, visual pain scores at discharge or follow up time. All patients underwent a transversus abdominis plane block. The median operative time was 150min (range, 105-240) in the outpatient group vs. 170min (range, 97-300) in the admitted group (p=0.023). The median estimated blood loss was 50ml (range, 20-150) in the outpatient group vs. 120ml (range, 20-1000) in the admitted group (p=0.001). All patients were able to void spontaneously and tolerate a diet before discharge. In patients who were admitted, the median hospital stay was 1day, (range; 1-6), and 39 (87%) were discharged at postoperative day 1. There were 6 postoperative complications, 3 in each group. There were no recurrences in the follow-up period in the outpatient group, and there were 3 (6.6%) recurrences in the admitted group. Outpatient laparoscopic radical hysterectomy is feasible and can be performed safely in a developing country in well-selected patients. Copyright © 2016. Published by Elsevier Inc.

  11. Feasibility study of a hand guided robotic drill for cochleostomy.

    Science.gov (United States)

    Brett, Peter; Du, Xinli; Zoka-Assadi, Masoud; Coulson, Chris; Reid, Andrew; Proops, David

    2014-01-01

    The concept of a hand guided robotic drill has been inspired by an automated, arm supported robotic drill recently applied in clinical practice to produce cochleostomies without penetrating the endosteum ready for inserting cochlear electrodes. The smart tactile sensing scheme within the drill enables precise control of the state of interaction between tissues and tools in real-time. This paper reports development studies of the hand guided robotic drill where the same consistent outcomes, augmentation of surgeon control and skill, and similar reduction of induced disturbances on the hearing organ are achieved. The device operates with differing presentation of tissues resulting from variation in anatomy and demonstrates the ability to control or avoid penetration of tissue layers as required and to respond to intended rather than involuntary motion of the surgeon operator. The advantage of hand guided over an arm supported system is that it offers flexibility in adjusting the drilling trajectory. This can be important to initiate cutting on a hard convex tissue surface without slipping and then to proceed on the desired trajectory after cutting has commenced. The results for trials on phantoms show that drill unit compliance is an important factor in the design.

  12. Feasibility Study of a Hand Guided Robotic Drill for Cochleostomy

    Directory of Open Access Journals (Sweden)

    Peter Brett

    2014-01-01

    Full Text Available The concept of a hand guided robotic drill has been inspired by an automated, arm supported robotic drill recently applied in clinical practice to produce cochleostomies without penetrating the endosteum ready for inserting cochlear electrodes. The smart tactile sensing scheme within the drill enables precise control of the state of interaction between tissues and tools in real-time. This paper reports development studies of the hand guided robotic drill where the same consistent outcomes, augmentation of surgeon control and skill, and similar reduction of induced disturbances on the hearing organ are achieved. The device operates with differing presentation of tissues resulting from variation in anatomy and demonstrates the ability to control or avoid penetration of tissue layers as required and to respond to intended rather than involuntary motion of the surgeon operator. The advantage of hand guided over an arm supported system is that it offers flexibility in adjusting the drilling trajectory. This can be important to initiate cutting on a hard convex tissue surface without slipping and then to proceed on the desired trajectory after cutting has commenced. The results for trials on phantoms show that drill unit compliance is an important factor in the design.

  13. HIV Care Nurses' Knowledge of HIV Criminalization: A Feasibility Study.

    Science.gov (United States)

    Phillips, J Craig; Domingue, Jean-Laurent; Petty, Mary; Coker, Michael A; Howard, Terry; Margolese, Shari

    HIV-related criminal laws in some jurisdictions may hamper population health efforts to manage HIV and bring about an AIDS-free generation. HIV care nurses have an instrumental role to play in ensuring equitable care and health for all in a context of HIV. The purpose of our study was to determine HIV care nurses' knowledge of HIV-related criminal laws. Ecosocial theory and content expert opinion guided development of a questionnaire to assess nurses' knowledge of HIV-related criminal laws. A total of 174 HIV care nurses from Canada (n = 23) and the United States (n = 151) completed the questionnaire. Knowledge gaps were observed in several aspects of HIV-related criminal laws that can influence nursing clinical practices. Nurses should increase their knowledge of HIV-related criminal laws to ensure the success of population health initiatives and to reduce stigma and discrimination experienced by people living with HIV. Copyright © 2016 Association of Nurses in AIDS Care. Published by Elsevier Inc. All rights reserved.

  14. Feasibility study for NPP Mochovce Units 3 and 4 completion

    International Nuclear Information System (INIS)

    Tomik, L.; Chakraborty, S.; Hoffelner, W.; Stoian, A.

    2004-01-01

    The system dynamic approach presented in this study by modelling the behaviour of Slovak market on the basis of system dynamic model (Forrester model), enables real mix in the extend of 12 years and helps understanding of the market limits. In addition this tool can be used for sensitivity calculations depending on many parameters to develop possible trends in the economic development of the Slovak Republic. If both nuclear power options are maintained then it becomes obvious that electric excess energy is produced and could be exported. This export option remains for the situation that a strong growth of the gross national product is assumed without any increase in energy efficiency. Between these extremes is the scenario that Bohunice 1, 2 off is balanced by Mochovce 3, 4 on and increasing demand this will lead to more moderate but still not negligible potential of CO 2 increase. Switching off Bohunice 1, 2 and not switching on Mochovce 3, 4 leads to energy need which must be counterbalanced either by investments in other power plants or by import energy. As far as domestic production is concerned even assuming 50 % CHP production leads to partly remarkable additional CO 2 -production which might infringe on a long term basis with the Kyoto goals. Assuming additional CO 2 -emissions from increasing traffic real problems can be expected in such a case. To maintain national nuclear capabilities in Slovakia is very important for today and for future of nuclear energy option in enlarged European Union. (authors)

  15. THE IMPORTANCE OF THE FEASIBILITY STUDY FOR THE BUSINESS PLAN

    Directory of Open Access Journals (Sweden)

    CEAUSESCU IONUT

    2015-12-01

    Full Text Available The micro and macro-economical development of the world states is strongly influenced by the volume,structure and dynamic of finalized investment or being in various stages of progress The whole individual and social-human existence has its continuity and support in the area of investments. Looked at from the point of view of theory, as a complex and controversial financial category, appears to us in the investment plan as a practical reality that marks the past and future scans. In community life, occupying a central place investment, a factor which influences the application simultaneously, as well as the offer of goods or services. The argument in favor of this is given by the processes of training and multiplier effects generated by any investment project, whatever the sector of activity in which it applies. Implementation of a project in the sphere of production of goods and/or services has the effect increasing the diversification of supply and thus if it is validated by the market, rising incomes of economic agents. Investment project does not represent anything other than a set of tasks with a start and an end established, limited time, resources and budget, made in order to achieve a defined objective, the projects have become practically the main operational tool at the level of organizations, in the investment plan. Thus, in this study we propose to emphasize the importance of documentation that underpins the implementation of an investment project.

  16. Feasibility study on introduction of petroleum substituting energy for transportation

    Science.gov (United States)

    1992-03-01

    Concerning electric cars, methanol cars, and CNG (Compressed Natural Gas) cars, the status of development of each of them is studied, grasps the problems on their wide spread through hearings to users, and makes an estimate of the number of cars which is the target for the spread for the time being on the condition that their performance is on the present level. The development of more efficient electric batteries and motors is anticipated for electric cars. Methanol cars have a problem on traveling performance that travel distance by one battery charge is not more than about (1/2) of the existing cars, as well as technical problems such as the development of diesel type use engines, durability of parts, etc. CNG cars have a problem on travel distance by one battery charge which is not more than about (1/3) of the existing cars and a problem on the space caused by carrying the fuel bomb. The target number of fuel substitution cars for the spread is estimated at 833,000 cars, 14% of all the cars in Japan. As of 1991, the number of fuel substitution cars introduced is about 1,200 cars only. In order to lessen the gap, it is indispensable to prepare the infrastructure, improve performance and reliability of the cars, and reduce the cost.

  17. Multi-gamma-source CT imaging system: a feasibility study with the Poisson noise

    Science.gov (United States)

    Wi, Sunhee; Cho, Seungryong

    2016-03-01

    This study was performed to test the feasibility of multi-gamma-source CT imaging system. Gamma-source CT employs radioisotopes that emit monochromatic energy gamma-rays. The advantages of gamma-source CT include its immunity to beam hardening artifacts, its capacity of quantitative CT imaging, and its higher performance in low contrast imaging compared to the conventional x-ray CT. Radioisotope should be shielded by use of a pin-hole collimator so as to make a fine focal spot. Due to its low gamma-ray flux in general, the reconstructed image from a single gamma-source CT would suffer from high noise in data. To address this problem, we proposed a multi-gamma source CT imaging system and developed an iterative image reconstruction algorithm accordingly in this work. Conventional imaging model assumes a single linear imaging system typically represented by Mf = g. In a multi-gamma-source CT system however, the inversion problem is not any more based on a single linear system since one cannot separate a detector pixel value into multiple ones that are corresponding to each rays from the sources. Instead, the imaging model can be constructed by a set of linear system models each of which assumes an estimated measurement g. Based on this model, the proposed algorithm has a weighting step which distributes each projection data into multiple estimated measurements. We used two gamma sources at various positions and with varying intensities in this numerical study to demonstrate its feasibility. Therefore, the measured projection data(g) is separated into each estimated projection data(g1, g2) in this study. The proposed imaging protocol is believed to contribute to both medical and industrial applications.

  18. Increasing Fruit and Vegetable Consumption Through a Healthy Eating Blog: A Feasibility Study.

    Science.gov (United States)

    Caplette, Marie-Eve; Provencher, Véronique; Bissonnette-Maheux, Véronique; Dugrenier, Marilyn; Lapointe, Annie; Gagnon, Marie-Pierre; Straus, Sharon; Desroches, Sophie

    2017-04-18

    Despite efforts made by public health organizations to improve consumption of fruits and vegetables, populations in developed countries usually eat less than the minimum recommended. Social media, such as blogs, represent a unique opportunity for improving knowledge translation in health care because they facilitate interactive communication between the public and health professionals. However, no studies have yet evaluated the effect of blogs to promote dietary behavior changes. Our study aims to conduct a preliminary assessment before undertaking a full randomized controlled trial (RCT) of the feasibility of using an evidence-based healthy eating blog promoting the consumption of fruits and vegetables among adult women. A total of 80 women aged 18 years and older (mean 42, SD 13 years) eating less than five servings per day of fruit and vegetables (mean 2.75, SD 1.84 servings) were recruited. Participants were randomized to the healthy eating blog group (n=40), which included a weekly blog post over a 6-month period, or to a control group (n=40) that had no exposure to the healthy eating blog. Blog posts were written by a registered dietitian and focused on the improvement of fruit and vegetable consumption. We targeted four main determinants of the behavior that were identified as the best predictors for fruit and vegetable intake by two systematic reviews: (1) knowledge, (2) attitude, (3) self-efficacy, and (4) motivation. The intervention was considered feasible if (1) more than 70% of questionnaires were completed, (2) attendance rate was more than 90% for in-person appointments with the research coordinator, (3) participants accessed at least 75% of the blog posts, and (4) the attrition rate was less than 25%. Blog access was assessed by collecting the blog browsing history data for each participant. During the intervention, 26 posts were published on the blog. Pre- (baseline) and postintervention (6 months) questionnaires were completed by mean 97% (SD 3

  19. A Persuasive and Social mHealth Application for Physical Activity: A Usability and Feasibility Study

    Science.gov (United States)

    Al Ayubi, Soleh U; Branch, Robert; Ding, Dan

    2014-01-01

    Background Advances in smartphones and the wide usage of social networking systems offer opportunities for the development of innovative interventions to promote physical activity. To that end, we developed a persuasive and social mHealth application designed to monitor and motivate users to walk more every day. Objective The objectives of this project were to conduct a focused review on the fundamental characteristics of mHealth for physical activity promotion, to develop an mHealth application that meets such characteristics, and to conduct a feasibility study to deploy the application in everyday life. Methods This project started as an analytical study to review the fundamental characteristics of the technologies used in physical activity monitoring and promotion. Then, it was followed by a technical development of the application. Next, a 4 week deployment was conducted where participants used the application as part of their daily life. A think-aloud method and in-depth semistructured interviews were conducted following the deployment. A qualitative description method was used to thematically analyze the interviews. Feasibility measures included, adherence to the program, user-system interactions, motivation to use, and experience with physical activity and online social interactions. Results There were seven fundamental characteristics of physical activity monitoring and promotion that were identified, which were then used as a foundation to develop the application. There were fourteen participants that enrolled in the application evaluation. The age range was from 24 to 45; body mass index ranged from 18.5 to 42.98, with 4 of the subjects falling into the category “obese”. Half of them were experienced with smartphones, and all were familiar with a social network system. There were thirteen participants that completed the study; one was excluded. Overall, participants gave high scores to almost all of the usability factors examined, with averages of 4

  20. VPAC1 receptors for imaging breast cancer: a feasibility study.

    Science.gov (United States)

    Thakur, Mathew L; Zhang, Kaijun; Berger, Adam; Cavanaugh, Barbara; Kim, Sung; Channappa, Chaitra; Frangos, Andrea J; Wickstrom, Eric; Intenzo, Charles M

    2013-07-01

    VPAC1 encodes G-protein-coupled receptors expressed on all breast cancer (BC) cells at the onset of the disease, but not on benign lesions. Our extensive preclinical studies have shown that (64)Cu-TP3805 has a high affinity for VPAC1, is stable in vivo, and has the ability to distinguish spontaneously grown malignant BC masses from benign lesions. Our long-term goal is to develop (64)Cu-TP3805 as an agent to perform in vivo histology, to distinguish malignant lesions from benign masses noninvasively and thereby avoid patient morbidity and the excess economic costs of benign biopsies. (18)F-FDG obtained commercially served as a control. (64)Cu-TP3805 was prepared using a sterile kit containing 20 μg of TP3805. Radiochemical purity and sterility were examined. Nineteen consenting women with histologically proven BC were given 370 MBq of (18)F-FDG. One hour later, 6 of these patients were imaged with PET/CT and 13 with positron emission mammography (PEM). Two to 7 d later, 6 PET/CT patients received 111 MBq (± 10%) (n = 2), 127 MBq (± 10%) (n = 2), or 148 MBq (± 10%) (n = 2) of (64)Cu-TP3805 and were imaged 2 and 4 h later. Thirteen PEM patients received 148 MBq (± 10%) of (64)Cu-TP3805 and were imaged 15 min, 1 h, 2 h, and 4 h later. Standardized uptake value (SUV) was calculated for PET/CT patients, and PUV/BGV (PEM uptake value/background value) was calculated for PEM patients. Tumor volume was also calculated. The radiochemical purity of (64)Cu-TP3805 was 97% ± 2%, and specific activity was 44.4 GBq (1.2 Ci)/μmol. In 19 patients, a total of 24 lesions were imaged (15 invasive ductal carcinoma, 1 high-grade mammary carcinoma, 3 lobular carcinoma, 1 invasive papilloma, and 4 sentinel lymph nodes). All lesions were unequivocally detected by (64)Cu-TP3805 and by (18)F-FDG. The average tumor volume as determined by PET/CT with (64)Cu-TP3805 was 90.6% ± 16.1% of that with (18)F-FDG PET/CT, and the average SUV was 92% ± 26.4% of that with (18)F-FDG. For PEM, the

  1. 76 FR 70152 - Pilot Program for Early Feasibility Study Investigational Device Exemption Applications

    Science.gov (United States)

    2011-11-10

    ... these studies, iterative device modifications are likely to be made based on clinical experience. Early feasibility studies may be appropriate early in the device development process in a limited number of subjects... advance the development process, making clinical experience necessary. As with all clinical studies, the...

  2. Feasibility study of a biomass-fired cogeneration plant Groningen, Netherlands

    International Nuclear Information System (INIS)

    Rijk, P.J.; Van Loo, S.; Webb, R.

    1996-06-01

    The feasibility of the title plant is determined for district heating and electricity supply of more than 1,000 houses in Groningen, Netherlands. Also attention is paid to the feasibility of such installations in a planned area of the city. Prices and supply of several biomass resources are dealt with: prunings of parks, public and private gardens, clean wood wastes, wood wastes from forests, wood from newly planted forests, specific energy crops (willows in high densities and short cycles). Prices are calculated, including transport to the gate of the premises where the cogeneration installations is situated. For the conversion attention is paid to both the feasibility of the use of a conventional cogeneration installation (by means of a steam turbine) and the use of a new conversion technique: combined cycle of a gasification installation and a cogeneration installation. 5 figs., 5 ills., 22 tabs., 1 appendix, 33 refs

  3. Current status of feasibility studies on commercialized fuel cycle system for Fast Breeder Reactor

    International Nuclear Information System (INIS)

    Ojima, Hisao; Nagaoki, Yoshihiro

    2000-01-01

    A 'Feasibility Studies on Commercialized Fast Breeder Reactor Cycle System' is underway at the Japan Nuclear Cycle Development Institute (JNC). The study will select the promising concepts with their R and D tasks in order to commercialize the fast breeder reactor (FBR) cycle system. The feasibility studies (F/S) have to present surveyed and screened various relevant technologies, and defined the design requirement of the commercialized fuel cycle system for FBR. The promising technical options are being evaluated and conceptual designs are being examined. At the end of JFY2000, several candidate concepts of the commercialized FBR cycle system will be proposed. (author)

  4. Industrial feasibility study of a spent nuclear fuel package for direct deep disposal

    International Nuclear Information System (INIS)

    Le Lous, K.; Loubrieu, J.; Chupeau, J.; Serpantie, J.P.; Becle, D.; Aubry, S.

    2001-01-01

    EDF has undertaken to study the industrial feasibility of a spent nuclear fuel package meeting direct disposal requirements. In this context, a disposal concept has been defined in which packages are cooled in place until the module is finally sealed. Indeed, one of the objectives of that disposal concept is to reduce the underground area occupied by the repository. A functional analysis has been performed within the framework of that ventilated disposal concept, taking into account the phases of the package lifetime from its conditioning until the disposal post-closure phase. An industrial feasibility study is in progress, which takes into account the functional specifications and some preliminary studies. (author)

  5. Gastrojejunal anastomosis using a tissue-apposing stent: a safety and feasibility study in live pigs.

    Science.gov (United States)

    Vanbiervliet, Geoffroy; Bonin, Eduardo Aimore; Garcès, Rodrigo; Gonzalez, Jean-Michel; Garnier, Emmanuelle; Paul, Marie Christine Saint; Berdah, Stéphane; Barthet, Marc

    2014-10-01

    Various techniques using surgical and natural orifice transluminal endoscopic surgery (NOTES) have been evaluated to create a gastrojejunal bypass. The aim of the current study was to determine the safety, feasibility, and efficacy of a new technique using a pure endoscopic approach and tissue-apposing stent placement for gastrojejunal anastomosis (GJA). This was a prospective, experimental study on six live pigs weighing 20 - 45  kg. Endoscopies were performed using a double-channel gastroscope, and included the creation of a GJA using a tissue-apposing, fully covered, self-expanding metallic stent. Antibiotic therapy was continued for 7 days after the procedure, and food was gradually reintroduced from Day 3. Changes in weight following the procedure were compared with a control group of age-matched animals. Anastomosis functionality was confirmed by endoscopy at 3 weeks (before the animals were euthanized), and during histopathological analysis. The primary outcomes were morbidity and mortality at 3 weeks. Secondary outcomes were technical feasibility, procedure time, and patency of the GJA. The procedures were performed successfully in all animals. The mean procedure time was 26  ±  6.7 minutes (range 15 - 32 minutes). One case of stent migration occurred during the procedure; the stent was successfully replaced using the same procedure. All animals were alive after 3 weeks. The mean weight gain during follow-up was 0.85  ±  2.56  kg (range - 2 to + 2  kg) compared with 5.2  ±  1.6  kg (range 3 - 7  kg) in control animals (P = 0.007). At necropsy, the stents were still in place in all animals, without evidence of peritonitis. Histopathology confirmed permeable anastomoses with continuity of the mucosa and mucosa muscle layers. GJA with a tissue-apposing stent is safe, feasible, and reproducible without anastomotic leakage in a porcine model using a pure endoscopic approach and standard endoscopic equipment. © Georg

  6. A feasibility study of in vivo applications of single beam acoustic tweezers

    Science.gov (United States)

    Li, Ying; Lee, Changyang; Chen, Ruimin; Zhou, Qifa; Shung, K. Kirk

    2014-10-01

    Tools that are capable of manipulating micro-sized objects have been widely used in such fields as physics, chemistry, biology, and medicine. Several devices, including optical tweezers, atomic force microscope, micro-pipette aspirator, and standing surface wave type acoustic tweezers have been studied to satisfy this need. However, none of them has been demonstrated to be suitable for in vivo and clinical studies. Single beam acoustic tweezers (SBAT) is a technology that uses highly focused acoustic beam to trap particles toward the beam focus. Its feasibility was first theoretically and experimentally demonstrated by Lee and Shung several years ago. Since then, much effort has been devoted to improving this technology. At present, the tool is capable of trapping a microparticle as small as 1 μm, as well as a single red blood cell. Although in comparing to other microparticles manipulating technologies, SBAT has advantages of providing stronger trapping force and deeper penetration depth in tissues, and producing less tissue damage, its potential for in vivo applications has yet been explored. It is worth noting that ultrasound has been used as a diagnostic tool for over 50 years and no known major adverse effects have been observed at the diagnostic energy level. This paper reports the results of an initial attempt to assess the feasibility of single beam acoustic tweezers to trap microparticles in vivo inside of a blood vessel. The acoustic intensity of SBAT under the trapping conditions that were utilized was measured. The mechanical index and thermal index at the focus of acoustic beam were found to be 0.48 and 0.044, respectively, which meet the standard of commercial diagnostic ultrasound system.

  7. Monitoring Human Performance During Suited Operations: A Technology Feasibility Study Using EMU Gloves

    Science.gov (United States)

    Bekdash, Omar; Norcross, Jason; McFarland, Shane

    2015-01-01

    Mobility tracking of human subjects while conducting suited operations still remains focused on the external movement of the suit and little is known about the human movement within it. For this study, accelerometers and bend sensitive resistors were integrated into a custom carrier glove to quantify range of motion and dexterity from within the pressurized glove environment as a first stage feasibility study of sensor hardware, integration, and reporting capabilities. Sensors were also placed on the exterior of the pressurized glove to determine if it was possible to compare a glove joint angle to the anatomical joint angle of the subject during tasks. Quantifying human movement within the suit was feasible, with accelerometers clearly detecting movements in the wrist and reporting expected joint angles at maximum flexion or extension postures with repeatability of plus or minus 5 degrees between trials. Bend sensors placed on the proximal interphalangeal and distal interphalangeal joints performed less well. It was not possible to accurately determine the actual joint angle using these bend sensors, but these sensors could be used to determine when the joint was flexed to its maximum and provide a general range of mobility needed to complete a task. Further work includes additional testing with accelerometers and the possible inclusion of hardware such as magnetometers or gyroscopes to more precisely locate the joint in 3D space. We hope to eventually expand beyond the hand and glove and develop a more comprehensive suit sensor suite to characterize motion across more joints (knee, elbow, shoulder, etc.) and fully monitor the human body operating within the suit environment.

  8. A Pilot Feasibility Study of Whole-systems Ayurvedic Medicine and Yoga Therapy for Weight Loss.

    Science.gov (United States)

    Rioux, Jennifer; Thomson, Cynthia; Howerter, Amy

    2014-01-01

    To develop and test the feasibility of a whole-systems lifestyle intervention for obesity treatment based on the practices of Ayurvedic medicine/ Yoga therapy. A pre-post weight loss intervention pilot study using conventional and Ayurvedic diagnosis inclusion criteria, tailored treatment within a standardized treatment algorithm, and standardized data collection instruments for collecting Ayurvedic outcomes. A convenience sample of overweight/obese adult community members from Tucson, Arizona interested in a "holistic weight loss program" and meeting predetermined inclusion/exclusion criteria. A comprehensive diet, activity, and lifestyle modification program based on principles of Ayurvedic medicine/yoga therapy with significant self-monitoring of lifestyle behaviors. The 3-month program was designed to change eating and activity patterns and to improve self-efficacy, quality of life, well-being, vitality, and self-awareness around food choices, stress management, and barriers to weight loss. Changes in body weight, body mass index; body fat percentage, fat/lean mass, waist/hip circumference and ratio, and blood pressure. Diet and exercise self-efficacy scales; perceived stress scale; visual analog scales (VAS) of energy, appetite, stress, quality of life, well-being, and program satisfaction at all time points. Twenty-two adults attended an in-person Ayurvedic screening; 17 initiated the intervention, and 12 completed the 3-month intervention. Twelve completed follow-up at 6 months and 11 completed follow-up at 9 months. Mean weight loss at 3 months was 3.54 kg (SD 4.76); 6 months: 4.63 kg, (SD 6.23) and 9 months: 5.9 kg (SD 8.52). Self-report of program satisfaction was more than 90% at all time points. An Ayurveda-/yoga-based lifestyle modification program is an acceptable and feasible approach to weight management. Data collection, including self-monitoring and conventional and Ayurvedic outcomes, did not unduly burden participants, with attrition similar to

  9. Feasibility of using experimental high viscosity silicone oils: a pilot study.

    Science.gov (United States)

    Sheen-Ophir, Shira; Rosner, Mordechai; Rubowitz, Alexander

    2018-01-01

    Polydimethyl silicones (silicone oils) are used in complex retinal surgeries, including difficult or recurrent retinal detachments, severe eye trauma, and other indications for long term tamponade. Two major problems with currently available silicone oils are emulsification and recurrent retinal detachment. The primary endpoint of this study was to evaluate the toxicity and safety of high viscosity silicone oils and second, the feasibility of using them with currently available vitrectomy systems. In this experimental study, 8 eyes of 8 New Zealand White rabbits underwent vitrectomy. The vitreous cavities of 2 eyes were filled with medical grade 5500 cS silicone oil, 4 eyes with 12,500 cS oil, and 2 eyes with 30,000 cS oil for 3 months, after which the animals were sacrificed and the eyes sent for histopathological examination. The duration required to inject 5 cc each of 1300, 12,500 and 30,000 cS oils, using a commercially available system (Alcon VFC Pac) were also evaluated. Retinal histopathology was comparable in all eyes, with no excess toxic effect or damage seen in eyes with experimental oils. All oils were readily injectable with the VFC Pac system. High viscosity experimental silicone oils have similar chemical and physical properties to lower viscosity oils currently used. Therefore, toxicities are expected to be similar. In a small pilot sample of 8 rabbit eyes filled with silicone oil for 3 months, histopathology in eyes with 12,500, 30,000 cS or medical grade 5500 cS silicone oil were similar. Injecting these oils using available vitrectomy equipment is feasible. New, high viscosity silicone oils may offer several advantages over currently available oils for some patients.

  10. Mindfulness meditation training in adults and adolescents with ADHD: a feasibility study.

    Science.gov (United States)

    Zylowska, Lidia; Ackerman, Deborah L; Yang, May H; Futrell, Julie L; Horton, Nancy L; Hale, T Sigi; Pataki, Caroly; Smalley, Susan L

    2008-05-01

    ADHD is a childhood-onset psychiatric condition that often continues into adulthood. Stimulant medications are the mainstay of treatment; however, additional approaches are frequently desired. In recent years, mindfulness meditation has been proposed to improve attention, reduce stress, and improve mood. This study tests the feasibility of an 8-week mindfulness training program for adults and adolescents with ADHD. Twenty-four adults and eight adolescents with ADHD enrolled in a feasibility study of an 8-week mindfulness training program. The majority of participants completed the training and reported high satisfaction with the training. Pre-post improvements in self-reported ADHD symptoms and test performance on tasks measuring attention and cognitive inhibition were noted. Improvements in anxiety and depressive symptoms were also observed. Mindfulness training is a feasible intervention in a subset of ADHD adults and adolescents and may improve behavioral and neurocognitive impairments. A controlled clinical study is warranted.

  11. Use of an Exercise Technology in Post-Acute Care of a Skilled Nursing Facility: A Feasibility Study.

    Science.gov (United States)

    Cimarolli, Verena R; Reinhardt, Joann P; Minahan, Jillian; Burack, Orah; Thomas, Channing; Melly, Regina

    2017-11-01

    Use of exercise technologies has benefits for community-dwelling older adults in terms of improved gait and balance. But research on the feasibility of use of exercise technologies in various geriatric health care settings is lacking. Hence, the current study examined the feasibility of implementing an exercise technology intended to augment rehabilitation in patients receiving post-acute care (PAC) in a skilled nursing facility (SNF). We focused on 3 indicators of feasibility: extent of usage (including predictors of more intense use), patients' acceptability of the technology, and limited efficacy. Cross-sectional study with data from patients' electronic medical records (EMR), exercise technology portal, and patient interviews. SNF. A sample of post-acute patients (n = 237). Sociodemographic and health-related variables, time spent using the technology, and 8 items of the Physical Activity Enjoyment Scale (PACES). Average time spent using the technology varied greatly (range, 1-460 minutes). A regression analysis showed that patients who had a longer length of stay (β = .01, P technology. Acceptability of technology was high among patients. Finally, patients who used the technology had lower 30-day rehospitalization rates. Exercise technology is feasible to use in supporting rehabilitation in patients receiving PAC in a SNF and seems to have beneficial effects. Copyright © 2017 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

  12. Oak Ridge Health Studies Phase 1 report, Volume 2: Part D, Dose Reconstruction Feasibility Study

    International Nuclear Information System (INIS)

    Bruce, G.M.; Walker, L.B.; Widner, T.E.

    1993-09-01

    The purpose of Task 6 of Oak Ridge Phase I Health Studies is to provide summaries of current knowledge of toxic and hazardous properties of materials that are important for the Oak Ridge Reservation. The information gathered in the course of Task 6 investigations will support the task of focussing any future health studies efforts on those operations and emissions which have likely been most significant in terms of off-site health risk. The information gathered in Task 6 efforts will likely also be of value to individuals evaluating the feasibility of additional health,study efforts (such as epidemiological investigations) in the Oak Ridge area and as a resource for citizens seeking information on historical emissions

  13. Incorporating health literacy in education for socially disadvantaged adults: an Australian feasibility study.

    Science.gov (United States)

    Muscat, Danielle M; Smith, Sian; Dhillon, Haryana M; Morony, Suzanne; Davis, Esther L; Luxford, Karen; Shepherd, Heather L; Hayen, Andrew; Comings, John; Nutbeam, Don; McCaffery, Kirsten

    2016-06-04

    Adult education institutions have been identified as potential settings to improve health literacy and address the health inequalities that stem from limited health literacy. However, few health literacy interventions have been tested in this setting. Feasibility study for an RCT of the UK Skilled for Health Program adapted for implementation in Australian adult education settings. Implementation at two sites with mixed methods evaluation to examine feasibility, test for change in participants' health literacy and pilot test health literacy measures. Twenty-two socially disadvantaged adults with low literacy participated in the program and received 80-90 hours of health literacy instruction. The program received institutional support from Australia's largest provider of vocational education and training and was feasible to implement (100 % participation; >90 % completion; high teacher satisfaction). Quantitative results showed improvements in participants' health literacy skills and confidence, with no change on a generic measure of health literacy. Qualitative analysis identified positive student and teacher engagement with course content and self-reported improvements in health knowledge, attitudes, and communication with healthcare professionals. Positive feasibility results support a larger RCT of the health literacy program. However, there is a need to identify better, multi-dimensional measures of health literacy in order to be able to quantify change in a larger trial. This feasibility study represents the first step in providing the high quality evidence needed to understand the way in which health literacy can be improved and health inequalities reduced through Australian adult education programs.

  14. The Economic Pre-feasibility Study of Madura Nuclear Desalination System

    International Nuclear Information System (INIS)

    Djoko-Birmanto, Moch; Suparman

    2004-01-01

    The feasibility study is needed in the planning of construction of NPPs SMART type coupled with desalination technology of MED tpe to produce clean water in Madura island. One important part of the feasibility study is the economical and financial analysis. The feasibility criteria of nuclear desalination project is analyzed by using the general parameters that is commonly used in evaluating a project, which is Financial Net Present Value (FNPV), Financial Internal Rate of Return (FIRR) and Payback Period. The calculation result shows that with the electricity selling price of 54.17 mills/KWh, for entirely project funded by the foreign loan, local loan and equity, it could be obtained FIRR 12.73 %, FNPV US$ 75.29 million and Payback Period is 8 years. By seeing from the project feasibility criteria, this nuclear desalination project can be feasible and the investment aspect shows that this project is beneficial because the capital return rate is rather high, the benefit in the end of the economic life-time is rather big and the capital payback period is fast. (author)

  15. Including the online feedback site, Patient Opinion, in the nursing curriculum: Exploratory study.

    Science.gov (United States)

    Jones, Ray; Young, Kim; Munro, James; Miller, Heather; Brelsford, Stephanie; Aronsson, Jennie; Goodman, Benny; Peters, Jane

    2017-10-01

    Globally, universities aim to involve people who use health services to enrich the nursing curriculum for students, but there can be barriers to this involvement. Many also want students to contribute to local communities. Online communication can help connect students to service users to achieve these aims. The online British patient feedback site, Patient Opinion, gathers comments from service users about services and encourages service responses to the comments. To explore the feasibility and acceptability of five ways of including Patient Opinion in the undergraduate nursing curriculum. Five case studies using mixed data collection methods. British University with nursing students across two campuses, accustomed to using webinars, video presentations and social media. Students from different years participated in the five approaches of making use of Patient Opinion in the curriculum; 18 students took part in an online forum to discuss Patient Opinion in the curriculum. We trialled timetabled webinars, video-linked lectures, optional enhanced access for self-study, optional audit of service user comments for two local hospitals, and optional Twitter and Tweetchat. Students discussed the aims and approaches in an online forum. Of the five approaches trialled, webinars seemed effective in ensuring that all nursing students engaged with the topic. Video-linked lectures provided an alternative when timetabling did not allow webinars, but were less interactive. The three optional approaches (Tweetchats, audit exercise, self-directed study) provided opportunities for some students to enhance their learning but students needed guidance. Sending a summary of student reviews of patients' feedback to local hospitals illustrated how students might be agents of change in local health services. Experience from these case studies suggests that webinars followed by use of Patient Opinion preparing for placements may be a sustainable way of embedding feedback sites in the

  16. Feasibility study for the implementation of NRTMA system for an industrial nuclear fuel fabrication plant

    International Nuclear Information System (INIS)

    Aparo, M.; Dionisi, M.; Graziani, M.; Remetti, R.

    1989-01-01

    In the frame of the problems arising from the fissile materials safeguards into the facilities of the nuclear fuel cycle, the International Safeguards devoted, in the recent years, R and D efforts on a new Dynamic Accountability procedures (Near Real Time Material Accountancy) appealing to the needs of timeliness in detecting diversion. This paper deals with a feasibility study of a NRTMA system to be applied to a nuclear fuel fabbrication plant for light water reactor. Such a feasibility study was performed by developing a dynamic model and a computer program, written in FORTRAN 77, in order to simulate all the processes and measurement procedures involved in the nuclear material accountancy

  17. Study to determine the feasibility of obtaining true samples of oil and gas reservoirs. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Ward, C.E.; Sinclair, A.R.

    1977-10-01

    The study concludes that a feasible solution is possible which would provide up to about 90 percent information accuracy under many operating conditions, well within the economic range for most oil and gas operations. The study also concludes that there is potential feasibility for the development of systems to approach 100 percent information accuracy under many operating situations. However, the cost of such a system is far beyond those considered practical within the economics of the competitive oil and gas industry. The justification of such a system has been likened to that of a ''moon shot'' approach and would take several years of development before true feasibility and probability of success could be assessed.

  18. Economical and technical feasibility study of some radioisotopes production for medical application

    International Nuclear Information System (INIS)

    Souza, A.L.A.B. de.

    1985-01-01

    The economical and technical feasibility study of the production in reactors of some radioisotopes most used in medicine, are presented. The clinical applications of each radioisotope as well as its radioactive concentrations and specific activities are related. Irradiation procedures based in the foregoing data are given. Part of the study is dedicated to quality control. (M.A.C.) [pt

  19. MODAS. Feasibility Study for Implementat