WorldWideScience

Sample records for incident non-fatal cvd

  1. [Incidence of non-fatal work-related accidents in Southeast Brazil].

    Science.gov (United States)

    Cordeiro, Ricardo; Prestes, Simone Cristina Chiodi; Clemente, Ana Paula Grotti; Diniz, Cíntia Ségre; Sakate, Mirian; Donalisio, Maria Rita

    2006-02-01

    Incidence of work-related accidents in Botucatu, São Paulo, Brazil, was estimated according to gender, age, employment status, occupation, and type of work. A household survey was conducted by systematic random group sampling (195 census tracts). Information was collected from all residents 10 years or older in each household. Of those who had worked during the 90 days prior to the interview, we obtained information on occupation, job position, and employment contract. The study included 9,626 households (sample fraction 0.26). The proportion of non-fatal work accidents in the municipal area was 3.3% (95%CI: 2.7-3.9), higher for men 4.5% (95%CI: 3.6-5.5) and varying with type of employment contract and occupation. Compared to results from previous studies, we observed a decline in work-related accident risk.

  2. Causes of General Aviation Weather-Related, Non-Fatal Incidents: Analysis Using NASA Aviation Safety Reporting System Data

    Science.gov (United States)

    2010-09-01

    Certified Flight Instructor-Instrument CFIT Controlled flight into terrain FAA U.S. Federal Aviation Administration FBO Fixed-base operator FSS Flight...William R. Knecht Michael Lenz Civil Aerospace Medical Institute Federal Aviation Administration Oklahoma City, OK 73125 September 2010 Final Report...Causes of General Aviation Weather- Related, Non-Fatal Incidents: Analysis Using NASA Aviation Safety Reporting System Data DOT/FAA/AM-10/13 Office

  3. Incidence and predictors of non-fatal drug overdose after release from prison among people who inject drugs in Queensland, Australia.

    Science.gov (United States)

    Winter, R J; Stoové, M; Degenhardt, L; Hellard, M E; Spelman, T; Jenkinson, R; McCarthy, D R; Kinner, S A

    2015-08-01

    Release from prison is a period of elevated risk for drug-related harms, particularly among people who inject drugs (PWID). Non-fatal overdose can cause serious morbidity and predicts future fatal overdose, however neither the incidence nor the risk factors for non-fatal overdose following release from prison are well understood. Structured health-related interviews were conducted with 1051 adult prisoners in Queensland, Australia prior to release and approximately 1, 3 and 6 months post-release. Incidence of self-reported overdose in the community was calculated for PWID and all prisoners for three discrete time periods. Negative binomial regression with robust error variance was used to identify pre-release predictors of overdose among PWID. The incidence of reported overdose was highest between 1 and 3 months post-release (37.8 per 100 person-years (PY) among PWID; 24.5/100 PY among all ex-prisoners). In adjusted analyses, the risk of post-release non-fatal overdose was higher for PWID who reported: being unemployed for >6 months before prison, having been removed from family as a child, at least weekly use of benzodiazepines and/or pharmaceutical opiates in the 3 months prior to prison, and ever receiving opioid substitution therapy (OST). Pre-release psychological distress and a lifetime history of mental disorder also predicted overdose, whereas risky alcohol use in the year before prison was protective. PWID have a high risk of overdose following release from prison. Imprisonment is an opportunity to initiate targeted preventive interventions such as OST, overdose prevention training and peer-delivered naloxone for those with a high risk profile. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  4. Non-Fatal Injury in Thailand From 2005 to 2013: Incidence Trends and Links to Alcohol Consumption Patterns in the Thai Cohort Study

    Directory of Open Access Journals (Sweden)

    Mami Wakabayashi

    2016-09-01

    Full Text Available Background: We analyzed population-based injury trends and the association between injury and alcohol consumption patterns in Thailand, a middle-income country undergoing rapid social change. Methods: A nationwide cohort of 42 785 Thai adult Open University students, who were aged 15 to 87 years at enrolment, participated in cross-sectional assessments at baseline (2005 and 8 years later (2013. Incident non-fatal traffic and non-traffic injuries were recorded. Alcohol consumption patterns were categorized as follows: nondrinkers, occasional light drinkers, occasional heavy drinkers, regular drinkers, and ex-drinkers. Logistic regression was used to assess associations in 2005 and 2013 between injuries and alcohol consumption. We adjusted odds ratios (ORs for socio-demographic factors, stress, health behaviors, and risk-taking behaviors. Results: Incidence estimates in 2013 were standardized to the age structure of 2005: the standardized rates were 10% (95% confidence interval [CI], 9.32–9.89 for participants with at least one non-traffic injury and 5% (95% CI, 4.86–5.29 for those with at least one traffic injury. Both standardized incidences for non-traffic and traffic injuries were significantly lower than corresponding rates in 2005 (20% and 6%, respectively. Alcohol consumption was significantly associated with non-traffic injury in 2005, but the association disappeared in 2013. For example, nontraffic injury was associated with regular drinking (adjusted OR 1.17; 95% CI, 1.01–1.40 in 2005, but not in 2013 (adjusted OR 0.89; 95% CI, 0.73–1.10. In both survey years, traffic injury was not associated with occasional heavy drinking when adjusted for health and risk-taking behavior. Conclusions: We examined non-fatal injury and the health-risk transition in Thailand in 2005 and 2013. Our data revealed decreases in alcohol consumption and non-fatal injury in the Thai Cohort between 2005 and 2013. Alcoholrelated injury in Thailand today

  5. Smoking reduction, smoking cessation, and incidence of fatal and non-fatal myocardial infarction in Denmark 1976-1998: a pooled cohort study

    DEFF Research Database (Denmark)

    Godtfredsen, N S; Osler, M; Vestbo, J

    2003-01-01

    reduced their daily tobacco consumption by at least 50% without quitting between first and second examination, and 1379 participants stopped smoking. During follow up 1658 men and 521 women experienced a fatal or non-fatal myocardial infarction. After adjustment for cardiovascular risk factors, people who......OBJECTIVE: To analyse the effects of smoking reduction and smoking cessation on incidence of myocardial infarction after adjustment for established cardiovascular risk factors. DESIGN: Prospective cohort study with record linkage to mortality and hospital registers. The association of individual...... change in smoking with myocardial infarction was examined in Cox proportional hazard analyses with continuous heavy smokers (> or =5 cigarettes/day) as reference. SETTING: Pooled data from three population studies conducted in Copenhagen, Denmark. PARTICIPANTS: 10 956 men and 8467 women with complete...

  6. Smoking reduction, smoking cessation, and incidence of fatal and non-fatal myocardial infarction in Denmark 1976-1998

    DEFF Research Database (Denmark)

    Godtfredsen, N S; Osler, M; Vestbo, J

    2003-01-01

    change in smoking with myocardial infarction was examined in Cox proportional hazard analyses with continuous heavy smokers (> or =5 cigarettes/day) as reference. SETTING: Pooled data from three population studies conducted in Copenhagen, Denmark. PARTICIPANTS: 10 956 men and 8467 women with complete......OBJECTIVE: To analyse the effects of smoking reduction and smoking cessation on incidence of myocardial infarction after adjustment for established cardiovascular risk factors. DESIGN: Prospective cohort study with record linkage to mortality and hospital registers. The association of individual...... information on smoking habits at two examinations five to ten years apart were followed up from the second examination for a first hospital admission or death from myocardial infarction. Mean duration of follow up was 13.8 years. MAIN RESULTS: A total of 643 participants who were heavy smokers at baseline...

  7. Smoking reduction, smoking cessation, and incidence of fatal and non-fatal myocardial infarction in Denmark 1976-1998

    DEFF Research Database (Denmark)

    Godtfredsen, N S; Osler, M; Vestbo, J

    2003-01-01

    OBJECTIVE: To analyse the effects of smoking reduction and smoking cessation on incidence of myocardial infarction after adjustment for established cardiovascular risk factors. DESIGN: Prospective cohort study with record linkage to mortality and hospital registers. The association of individual...... change in smoking with myocardial infarction was examined in Cox proportional hazard analyses with continuous heavy smokers (> or =5 cigarettes/day) as reference. SETTING: Pooled data from three population studies conducted in Copenhagen, Denmark. PARTICIPANTS: 10 956 men and 8467 women with complete...... information on smoking habits at two examinations five to ten years apart were followed up from the second examination for a first hospital admission or death from myocardial infarction. Mean duration of follow up was 13.8 years. MAIN RESULTS: A total of 643 participants who were heavy smokers at baseline...

  8. Smoking reduction, smoking cessation, and incidence of fatal and non-fatal myocardial infarction in Denmark 1976-1998: a pooled cohort study

    DEFF Research Database (Denmark)

    Godtfredsen, N S; Osler, M; Vestbo, J

    2003-01-01

    OBJECTIVE: To analyse the effects of smoking reduction and smoking cessation on incidence of myocardial infarction after adjustment for established cardiovascular risk factors. DESIGN: Prospective cohort study with record linkage to mortality and hospital registers. The association of individual...... change in smoking with myocardial infarction was examined in Cox proportional hazard analyses with continuous heavy smokers (> or =5 cigarettes/day) as reference. SETTING: Pooled data from three population studies conducted in Copenhagen, Denmark. PARTICIPANTS: 10 956 men and 8467 women with complete...... information on smoking habits at two examinations five to ten years apart were followed up from the second examination for a first hospital admission or death from myocardial infarction. Mean duration of follow up was 13.8 years. MAIN RESULTS: A total of 643 participants who were heavy smokers at baseline...

  9. A systematic review and meta-analysis of nut consumption and incident risk of CVD and all-cause mortality.

    Science.gov (United States)

    Mayhew, Alexandra J; de Souza, Russell J; Meyre, David; Anand, Sonia S; Mente, Andrew

    2016-01-28

    Dietary patterns containing nuts are associated with a lower risk of CVD mortality, and increased nut consumption has been shown to have beneficial effects on CVD risk factors including serum lipid levels. Recent studies have reported on the relationship between nut intake and CVD outcomes and mortality. Our objective was to systematically review the literature and quantify associations between nut consumption and CVD outcomes and all-cause mortality. Five electronic databases (through July 2015), previous reviews and bibliographies of qualifying articles were searched. In the twenty included prospective cohort studies (n 467 389), nut consumption was significantly associated with a lower risk of all-cause mortality (ten studies; risk ratio (RR) 0·81; 95 % CI 0·77, 0·85 for highest v. lowest quantile of intake, P het=0·04, I 2=43 %), CVD mortality (five studies; RR 0·73; 95 % CI 0·68, 0·78; P het=0·31, I 2=16 %), all CHD (three studies; RR 0·66; 95 % CI 0·48, 0·91; P het=0·0002, I 2=88 %) and CHD mortality (seven studies; RR 0·70; 95 % CI 0·64, 0·76; P het=0·65, I 2=0 %), as well as a statistically non-significant reduction in the risk of non-fatal CHD (three studies; RR 0·71; 95 % CI 0·49, 1·03; P het=0·03, I 2=72 %) and stroke mortality (three studies; RR 0·83; 95 % CI 0·69, 1·00; P het=0·54, I 2=0 %). No evidence of association was found for total stroke (two studies; RR 1·05; 95 % CI 0·69, 1·61; P het=0·04, I 2=77 %). Data on total CVD and sudden cardiac death were available from one cohort study, and they were significantly inversely associated with nut consumption. In conclusion, we found that higher nut consumption is associated with a lower risk of all-cause mortality, total CVD, CVD mortality, total CHD, CHD mortality and sudden cardiac death.

  10. Repeat non-fatal suicidal behaviour at Johannesburg Hospital

    Directory of Open Access Journals (Sweden)

    M YH Moosa

    2005-12-01

    Full Text Available Objective. To describe the characteristics of non-fatal suicide behaviour (NFSB in a group of patients and to determine factors, if any, that may be associated with repetition of this behaviour. Method. The study included all patients treated for NFSB at Johannesburg Hospital during the period August 2002 - October 2002. The information was gathered by means of a structured questionnaire designed to evaluate characteristics of the behaviour. Results. The study sample comprised 43 patients with NFSB (mean age 29.7 years, range of 16 - 75 years, of whom 26 (60% were female. Sixty-three per cent of the patients overdosed with medication and 33% ingested household poisons. Events that precipitated the event included relationship problems (70%, illness (12%, financial difficulties (9%, and depressed mood (9%. In 65% of patients the behaviour was impulsive. Factors associated with non-fatal repetition included being in the 18 - 30-year age group (76% (χ2 = 6.74, p < 0.05; being female (90% (χ2 = 4.75, p < 0.05; having children (90% (χ2 = 4.72, p < 0.05; a past psychiatric history (50% (χ2 = 4.08, p < 0.05; and the current attempt deemed medically serious (50% (χ2 = 6.67, p < 0.05. Conclusions. NFSB is a major problem in South Africa and the incidence is still increasing. Hospital-based interventions following admission are recommended to reduce repeat attempts in such patients. Significant factors associated with non-fatal repetition include among others, a history of a previous medically serious attempt and/or a known psychiatric illness.

  11. Unintentional, non-fatal drowning of children: US trends and racial/ethnic disparities.

    Science.gov (United States)

    Felton, Heather; Myers, John; Liu, Gil; Davis, Deborah Winders

    2015-12-15

    The current study aimed to better understand trends and risk factors associated with non-fatal drowning of infants and children in the USA using two large, national databases. A secondary data analysis was conducted using the National Inpatient Sample and the Nationwide Emergency Department Sample databases. The analytic sample (n=19,403) included children near-drowning/non-fatal drowning. Descriptive, χ(2) and analysis of variance techniques were applied, and incidence rates were calculated per 100,000 population. Non-fatal drowning incidence has remained relatively stable from 2006 to 2011. In general, the highest rates of non-fatal drowning occurred in swimming pools and in children from racial/ethnic minorities. However, when compared with non-Hispanic Caucasian children, children from racial/ethnic minorities were more likely to drown in natural waterways than in swimming pools. Despite the overall lower rate of non-fatal drowning among non-Hispanic Caucasian children, the highest rate of all non-fatal drowning was for non-Hispanic Caucasian children aged 0-4 years in swimming pools. Children who were admitted to inpatient facilities were younger, male and came from families with lower incomes. Data from two large US national databases show lack of progress in preventing and reducing non-fatal drowning admissions from 2006 to 2011. Discrepancies are seen in the location of drowning events and demographic characteristics. New policies and interventions are needed, and tailoring approaches by age and race/ethnicity may improve their effectiveness. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  12. Road traffic crashes with fatal and non-fatal injuries in Arkhangelsk, Russia in 2005-2010.

    Science.gov (United States)

    Kudryavtsev, Alexander V; Nilssen, Odd; Lund, Johan; Grjibovski, Andrej M; Ytterstad, Børge

    2013-01-01

    The study investigated trends in traffic crashes with fatal and non-fatal injuries in Arkhangelsk, Russia in 2005-2010. Data were obtained from the road police. Negative binomial regression with time regressor was used to investigate trends in monthly incidence rates (IRs) of crashes, fatalities, and non-fatal injuries. During the six-year period, the police registered 4955 crashes with fatal and non-fatal injuries, which resulted in 217 fatalities and 5964 non-fatal injury cases. The IR of crashes with fatal and non-fatal injuries per total population showed no evident change, while the IR per increasing total number of motor vehicles decreased on average by 0.6% per month. Pedestrian crashes constituted 51.8% of studied crashes, and pedestrians constituted 54.6% of fatalities and 44.5% of non-fatal injuries. The IRs of pedestrian crashes and non-fatal pedestrian injuries per total population decreased on average by 0.3% per month, and these were the major trends in the data.

  13. Geographical variation in cardiovascular incidence: results from the British Women's Heart and Health Study

    Directory of Open Access Journals (Sweden)

    Ebrahim Shah

    2010-11-01

    Full Text Available Abstract Background Prevalence of cardiovascular disease (CVD in women shows regional variations not explained by common risk factors. Analysis of CVD incidence will provide insight into whether there is further divergence between regions with increasing age. Methods Seven-year follow-up data on 2685 women aged 59-80 (mean 69 at baseline from 23 towns in the UK were available from the British Women's Heart and Health Study. Time to fatal or non-fatal CVD was analyzed using Cox regression with adjustment for risk factors, using multiple imputation for missing values. Results Compared to South England, CVD incidence is similar in North England (HR 1.05 (95% CI 0.84, 1.31 and Scotland (0.93 (0.68, 1.27, but lower in Midlands/Wales (0.85 (0.64, 1.12. Event severity influenced regional variation, with South England showing lower fatal incident CVD than other regions, but higher non-fatal incident CVD. Kaplan-Meier plots suggested that regional divergence in CVD occurred before baseline (before mean baseline age of 69. Conclusions In women, regional differences in CVD early in adult life do not further diverge in later life. This may be due to regional differences in early detection, survivorship of women entering the study, or event severity. Targeting health care resources for CVD by geographic variation may not be appropriate for older age-groups.

  14. Non-fatal occupational falls on the same level.

    Science.gov (United States)

    Yeoh, Han T; Lockhart, Thurmon E; Wu, Xuefang

    2013-01-01

    The purpose of this study was to describe antecedents and characteristics of same level fall injuries. Fall incidents and costs were compiled from the Bureau of Labor Statistics and other sources from 2006-2010. This study indicated that over 29% of 'fall on same level' injuries resulted in 31 or more workdays lost. The major source of injury was 'floors, walkways or ground surfaces', and the most affected body parts were the lower extremities and the trunk. With regard to gender and age, female workers had the highest risk of falls, while advancing age coincided with an increase in incidence rates. Overall, workers in the healthcare and social assistance industry, the transportation and warehousing industry, and the accommodation and food services industry had the highest risk for 'fall on same level' injuries. Furthermore, the overall compensation cost increased by 25% from 2006-2009. Along with existing evidence, these results may facilitate the design and implementation of preventative measures in the workplace and potentially reduce fall-related compensation costs. This research presents a unique and detailed analysis of non-fatal 'fall on same level' injuries in a large population of workers from various private industries in the USA. This information can be used to prioritise designing and implementing preventive measures and to provide workers with the understanding of risk factors associated with falls in the workplace.

  15. Non-fatal repetition of self-harm in Taipei City, Taiwan: cohort study.

    Science.gov (United States)

    Kwok, Chi-Leung; Yip, Paul S F; Gunnell, David; Kuo, Chian-Jue; Chen, Ying-Yeh

    2014-01-01

    Repeat self-harm is an important risk factor for suicide. Few studies have explored risk factors for non-fatal repeat self-harm in Asia. To investigate the risk of non-fatal repeat self-harm in a large cohort of patients presenting to hospital in Taipei City, Taiwan. Prospective cohort study of 7601 patients with self-harm presenting to emergency departments (January 2004-December 2006). Survival analysis was used to examine the rates, timing and factors associated with repeat self-harm. In total 778 (10.2%) patients presented to hospital with one or more further episodes of self-harm. The cumulative risk of non-fatal repetition within 1 year of a self-harm episode was 9.3% (95% CI 8.7-10.1). The median time to repetition within 1 year was 105 days. Females had a higher incidence of repeat self-harm than males (adjusted hazard ratio 1.25, 95% CI 1.05-1.48) but males had shorter median time to repetition (107 v. 80 days). Other independent risk factors for repeat self-harm within 1 year of an index episode were: young age, self-harm by medicine overdose and increasing number of repeat episodes of self-harm. The risk of non-fatal repeat self-harm in Taipei City is lower than that seen in the West. Risk factors for repeat non-fatal self-harm differ from those for fatal self-harm. The first 3 months after self-harm is a crucial period for intervention.

  16. Estimated total costs from non-fatal and fatal bicycle crashes in the USA: 1997-2013.

    Science.gov (United States)

    Gaither, Thomas W; Sanford, Thomas A; Awad, Mohannad A; Osterberg, E Charles; Murphy, Gregory P; Lawrence, Bruce A; Miller, Ted R; Breyer, Benjamin N

    2018-04-01

    Emergency department visits and hospital admissions resulting from adult bicycle trauma have increased dramatically. Annual medical costs and work losses of these incidents last were estimated for 2005 and quality-of-life losses for 2000. We estimated costs associated with adult bicycle injuries in the USA using 1997-2013 non-fatal incidence data from the National Electronic Injury Surveillance System with cost estimates from the Consumer Product Safety Commission's Injury Cost Model, and 1999-2013 fatal incidence data from the National Vital Statistics System costed by similar methods. Approximately 3.8 million non-fatal adult bicycle injuries were reported during the study period and 9839 deaths. In 2010 dollars, estimated adult bicycle injury costs totalled $24.4 billion in 2013. Estimated injury costs per mile bicycled fell from $2.85 in 2001 to $2.35 in 2009. From 1999 to 2013, total estimated costs were $209 billion due to non-fatal bicycle injuries and $28 billion due to fatal injuries. Inflation-free annual costs in the study period increased by 137% for non-fatal injuries and 23% for fatal injuries. The share of non-fatal costs associated with injuries to riders age 45 and older increased by 1.6% (95% CI 1.4% to 1.9%) annually. The proportion of costs due to incidents that occurred on a street or highway steadily increased by 0.8% (95% CI 0.4% to 1.3%) annually. Inflation-free costs per case associated with non-fatal bicycle injuries are increasing. The growth in costs is especially associated with rising ridership, riders 45 and older, and street/highway crashes. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  17. Non-fatal suicidal behaviour at the Johannesburg General Hospital

    African Journals Online (AJOL)

    Adele

    served high rates are increasing on an international scale. Figures from the World Health Organization ... feelings or acts. They include high self-esteem and social “con- ... Keywords: Non-fatal suicidal behaviour, Non-suicide attempters, Past psychiatric history, Physical abuse, Sexual abuse, Self-harm. Received: 12.10.04.

  18. Prevalence, circumstances and consequences of non-fatal road traffi ...

    African Journals Online (AJOL)

    Prevalence, circumstances and consequences of non-fatal road traffi c injuries and other bodily injuries among older people in China, Ghana, India, Mexico, Russia ... injury, while younger age, residing in a rural area, hazardous or harmful alcohol use and having a sleeping problem were associated with other bodily injury.

  19. Non-fatal suicidal behaviour at the Johannesburg General Hospital ...

    African Journals Online (AJOL)

    Objective: Non-fatal suicidal behaviour (NFSB) severely impacts on the health services and the resources of a country and should be prevented. The aim of this control study was to describe a group of patients with NFSB and to elicit, if any, the factors associated with this behaviour compared to a non-suicidal control group.

  20. Unintentional non-fatal home-related injuries in Central Anatolia, Turkey: frequencies, characteristics, and outcomes.

    Science.gov (United States)

    Alptekin, Fadimana; Uskun, Ersin; Kisioglu, Ahmet Nesimi; Ozturk, Mustafa

    2008-05-01

    Injuries constitute a major public health problem worldwide. Homes are an important setting for non-fatal unintentional injuries. The aim of this study is to determine the frequency, the characteristics, and the outcome of unintentional non-fatal injuries in the household, and to describe the related risk factors through a community-based survey. The study was conducted using a household-based survey design. Eight hundred inhabitants were sampled from the entire population in the city centre by a stratified sampling method in 2004. All unintentional non-fatal home-related injuries occurring in the previous year were registered and examined, making special note of the mechanism of the injuries, the time and place of the incidents and their outcomes. The frequency of unintentional non-fatal home-related injuries requiring some form of medical attention was established as 10.8%. Falls were the most common injuries among all the study groups. Injury rates were highest among the oldest (aged > or =65) and youngest (aged adults having incomes under euro 500, individuals living alone, or the unemployed. Contact with hot objects/substances or hot liquid/gas was the leading mechanism in children 4 years of age or younger, falls ranking second. Falls are a significant problem particularly among older adults. Multiple analysis revealed that participants with low incomes, living alone and single or divorced had a high risk for injury at home. The findings related to disability highlighted a need to focus attention on the prevention of residential falls among the elderly, and the burns and falls among young children. Preventive measures should be prioritised to risk groups such as individuals with low incomes and those living alone.

  1. Population based estimates of non-fatal injuries in the capital of Iran.

    Science.gov (United States)

    Saadat, Soheil; Mafi, Mostafa; Sharif-Alhoseini, Mahdi

    2011-07-31

    Fatal injuries are at the top of the injury pyramid; however, non-fatal injuries are quite common and impose huge medical expenses on the population. Relying on hospital data will underestimate the incidence of non-fatal injuries. The aim of this study was to estimate the annual incidence and out of pocket medical expenses of all injuries in urban population of Tehran (the capital city of Iran). Using the cluster random sampling approach, a household survey of residents of greater Tehran was performed on April 2008. At randomly selected residential locations, interviewers asked one adult person to report all injuries which have occurred during the past year for all household members, as well as the type of injury, place of occurrence, the activity, cause of accidents resulting in injuries, the amount of out of pocket medical expenses for injury, and whether they referred to hospital. This study included 2,450 households residing in Tehran during 2007-8. The annual incidence of all injuries was 188.7 (180.7-196.9), significant injuries needing any medical care was 68.8 (63.7-74.2), fractures was 19.3 (16.6 - 22.4), and injuries resulted in hospitalization was 16.7 (14.2 - 19.6) per 1000 population. The annual incidence of fatal injuries was 33 (7-96) per 100,000 Population. In children aged 15 or less, the annual incidence of all injuries was 137.2 (120.0 - 155.9), significant injuries needing any medical care was 64.2 (52.2 - 78.0), fractures was 21.8 (15.0 - 30.7), and injuries resulted in hospitalization was 6.8 (3.3 - 12.5) per 1000 population. The mean out of pocket medical expense for injuries was 19.9 USD. This population based study showed that the real incidence of non-fatal injuries in the capital of Iran is more than the formal hospital-based estimates. These injuries impose non trivial medical and indirect cost on the community. The out of pocket medical expense of non-fatal injuries to Tehran population is estimated as 27 million USD per year. Effective

  2. Hormone replacement therapy and risk of non-fatal stroke

    DEFF Research Database (Denmark)

    Pedersen, A T; Lidegaard, O; Kreiner, S

    1997-01-01

    of hormone use and stroke, on which information was obtained from postal questionnaires, were controlled for by multivariate analyses based on log-linear graphical models. The analyses included data on 1422 cases classified in four subtypes of stroke (160 subarachnoid haemorrhage, 95 intracerebral......BACKGROUND: The effect of postmenopausal hormone replacement therapy (HRT) on the risk of subtypes of stroke is as yet unclear. To investigate the effect of oestrogen and combined oestrogen-progestagen therapy on the risk of non-fatal haemorrhagic and thromboembolic stroke, we carried out a case...... to some extent be explained by selection--HRT users being more aware of symptoms than non-users. INTERPRETATION: Unopposed oestrogen and combined oestrogen-progestagen replacement therapy have no influence on the risk of non-fatal thromboembolic or haemorrhagic stroke in women aged 45-64 years....

  3. Non-fatal drowning in under-five rural children of Bangladesh

    Directory of Open Access Journals (Sweden)

    Syed Hassan Abdullah

    2015-07-01

    Full Text Available Drowning has been identified as a major cause of death in children in both developed and developing countries. Non-fatal drowning is several times higher than the fatal drowning. To describe the socio-demographic and environmental attributes of non-fatal drowning in rural children this community based descriptive study was conducted on 122 children having non-fatal drowning events within one year of study period. This study was undertaken in Raigonj sub-district of Sirajgonj district in Bangladesh. Mothers of those children were interviewed using a structured questionnaire. Out of all participants 56.6% children were 2-4 years of age and male-female ratio was almost equal. Of the total respondent mothers 55% were illiterate and 41.8% were below the age of 25 years. Seasonal variation was observed in non-fatal drowning. Rainy season (50.8% appeared as the most risky period followed by summer (29.5%. Higher incidence occurred (53.3% between 10 am to 2 pm of the day. Although most of the drowning occurred outside the home, 9% drowning occurred in water container (like drum, tub within the home. Pond (50.5% was found as the most common place among open water source. During the occurrence, 23% child was not accompanied by parents or any caregivers. At the time of drowning, 47.5% mothers were engaged with usual household work and were not present at the place of occurrence whereas 13% mothers were present around the place of occurance. Before drowning, 45.1% victim was either playing, bathing or swimming in the water. Only 10.7% needed resuscitation, 25% were taken to health centre and reached the health centre within an hour, about a fifth (22.6% of them were admitted. Restriction in dangerous water activities, strengthening supervision of children might decrease the incidence of drowning while quick and effective medical response might prevent its fatal consequences. Ibrahim Med. Coll. J. 2015; 9(2: 37-41

  4. Dietary choline and betaine; associations with subclinical markers of cardiovascular disease risk and incidence of CVD, coronary heart disease and stroke: the Jackson Heart Study.

    Science.gov (United States)

    Millard, Heather R; Musani, Solomon K; Dibaba, Daniel T; Talegawkar, Sameera A; Taylor, Herman A; Tucker, Katherine L; Bidulescu, Aurelian

    2018-02-01

    Several mechanisms have been described through which dietary intake of choline and its derivative betaine may be associated in both directions with subclinical atherosclerosis. We assessed the association of dietary intake of choline and betaine with cardiovascular risk and markers of subclinical cardiovascular disease. Data from 3924 Jackson Heart Study (JHS) African-American participants with complete food frequency questionnaire at baseline and follow-up measurements of heart disease measures were used. Multivariable linear regression models were employed to assess associations between choline and betaine intake with carotid intima-media thickness, coronary artery calcium, abdominal aortic calcium and left ventricular mass. Cox proportional hazards regression models were used to estimate associations with time to incident coronary heart disease (CHD), ischemic stroke and cardiovascular disease (CVD). During an average nine years of follow-up, 124 incident CHD events, 75 incident stroke events and 153 incident CVD events were documented. In women, greater choline intake was associated with lower left ventricular mass (p = 0.0006 for trend across choline quartiles) and with abdominal aortic calcium score. Among all JHS participants, there was a statistically significant inverse association between dietary choline intake and incident stroke, β = -0.33 (p = 0.04). Betaine intake was associated with greater risk of incident CHD when comparing the third quartile of intake with the lowest quartile of intake (HR 1.89, 95 % CI 1.14, 3.15). Among our African-American participants, higher dietary choline intake was associated with a lower risk of incident ischemic stroke, and thus putative dietary benefits. Higher dietary betaine intake was associated with a nonlinear higher risk of incident CHD.

  5. Associations between DSM-IV mental disorders and subsequent non-fatal, self-reported stroke

    Science.gov (United States)

    Swain, Nicola R.; Lim, Carmen C.W.; Levinson, Daphna; Fiestas, Fabian; de Girolamo, Giovanni; Moskalewicz, Jacek; Lepine, Jean-Pierre; Posada-Villa, Jose; Haro, Josep Maria; Medina-Mora, María Elena; Xavier, Miguel; Iwata, Noboru; de Jonge, Peter; Bruffaerts, Ronny; O’Neill, Siobhan; Kessler, Ron C.; Scott, Kate M.

    2015-01-01

    Objectives To examine the associations between a wide range of mental disorders and subsequent onset of stroke. Lifecourse timing of stroke was examined using retrospectively reconstructed data from cross-sectional surveys. Methods Data from the World Mental Health Surveys were accessed. This data was collected from general population surveys over 17 countries of 87,250 adults. The Composite International Diagnostic Interview retrospectively assessed lifetime prevalence and age at onset of DSM-IV mental disorders. A weighted subsample (n = 45,288), was used for analysis in the present study. Survival analyses estimated associations between first onset of mental disorders and subsequent stroke onset. Results Bivariate models showed that 12/16 mental disorders were associated with subsequent stroke onset (ORs ranging from 1.6 to 3.8). However, after adjustment for mental disorder comorbidity and smoking, only significant relationships between depression and stroke (OR 1.3) and alcohol abuse and stroke (OR 1.5) remained. Among females, having a bipolar disorder was also associated with increased stroke incidence (OR 2.1). Increasing number of mental disorders was associated with stroke onset in a dose–response fashion (OR 3.3 for 5+ disorders). Conclusions Depression and alcohol abuse may have specific associations with incidence of non-fatal stroke. General severity of psychopathology may be a more important predictor of non-fatal stroke onset. Mental health treatment should be considered as part of stroke risk prevention. Limitations of retrospectively gathered cross sectional surveys design mean further research on the links between mental health and stroke incidence is warranted. PMID:26094010

  6. Measuring hazardous work and identifying risk factors for non-fatal injuries among children working in Philippine agriculture.

    Science.gov (United States)

    Castro, Charita L; Hunting, Katherine

    2013-06-01

    Global consensus is lacking, especially among developing countries, on whether agricultural work is detrimental to children's health and safety. We aimed to measure the degree to which Philippine children working in agriculture have a higher risk of injury compared with children working in other industries, and to uncover potential risk factors for their non-fatal injuries. Using the Philippine Survey of Children (SOC) 2001, we calculated injury incidence rates and relative risk measures across industries, and employed a multivariate logistic regression on the sample of working children in agriculture to ascertain the association of various exposures with the occurrence of work-related injuries. Children working in agriculture had a fivefold risk of non-fatal injury compared to children working in other industries. Logistic regression indicated that the most robust risk factor for the occurrence of non-fatal injury was the use of tools (OR = 3.12). The results of this study demonstrate agriculture to be a hazardous industry for children. Further research should focus on identifying the most dangerous tools and restricting their use. Copyright © 2013 Wiley Periodicals, Inc.

  7. A fresh look at the costs of non-fatal consumer product injuries.

    Science.gov (United States)

    Lawrence, Bruce A; Spicer, Rebecca S; Miller, Ted R

    2015-02-01

    Products under the purview of the Consumer Product Safety Commission are involved in a large share of injuries and injury costs in the USA. This study analyses incidence data from the National Electronic Injury Surveillance System (NEISS) and cost data based on the Injury Cost Model, integrated with the NEISS. We examined the magnitude of non-fatal consumer product related injury, the distribution of products involved in these injuries and the cost of these injuries. We compared these findings with an earlier identical study from 2000. In 2008-2010, 43.8% of the annual 30.4 million non-fatal injuries treated in hospital emergency departments involved consumer products. Of these consumer product related injuries, in 2009-2010, just three product groups accounted for 77% of the $909 billion annual cost: sports and recreation; home structures and construction materials; and home furnishings and fixtures. Sports and recreation was a leading cause of injury costs among 5-24-year-olds, particularly football, basketball, bicycling, baseball/softball and soccer. Since 1996, football surpassed basketball in becoming the number one cause of injury costs for children aged 10-19 years and the fifth ranked cause of product related injury costs overall. Among those over age 30 years, stairs and floors were a leading cause of consumer product related injury costs, in particular among those over age 70 years where they were responsible for over one-fifth of costs. The findings of this study highlight priority areas for intervention and generate questions for future research. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  8. Non-fatal suicidal behaviour in women - the role of spousal ...

    African Journals Online (AJOL)

    Objective. To investigate the precipitants of non-fatal suicidal behaviour in women using a gender-based comparison. Design. A retrospective analysis of case records. Data were analysed using chi-square tests of significance. Subjects. One hundred men and 100 women admitted for non-fatal suicidal behaviour at a ...

  9. Non-fatal hemorrhage from pontine vascular malformations

    International Nuclear Information System (INIS)

    Yamashita, Junkoh; Aoyama, Ikuhiro; Gi, Hidefuku; Handa, Hajime

    1982-01-01

    Pontine vascular malformations have usually been found at autopsy as an incidental finding or as a cause of a fatal hemorrhage. In recent years, however, computerized tomography (CT) has made it possible to visualize these lesions while the patinents are still alive. In this paper, we report 2 cases with non-fatal hemorrhages from pontine vascular malformation. The first case was a 31-year-old housewife with cheif complaints of a sensory disturbance of the left half of the body, double vision, nausea, and vomiting of 2 weeks' duration. CT revealed a small high-density mass, which was partially slightly contrast-enhanced, in the right lower pontine tegmentum, affecting the medial and lateral lemnisci, abducens, facial and acoustic nerves, brachium pontis, medial longitudinal fasciculus, corticospinal and corticobulbar fibers, and parepontine reticular formation. The second case was a 52-year-old female clerk with chief complaints of a sensory disturbance of the right half of the body and gait disturbance of 7 months' duration. CT revealed a small high-density mass, which was partially contrast-enhanced, in the left midpontine tegmentum, affecting the medial and lateral lemnisci, lateral spinothalamic tract, ventral ascending tract of V, and brachium pontis. Although there was no evidence of subarachnoid hemorrhage, both cases were deterirating progressively, probably due to tepeated small intraparenchymal hemorrhages. They were treated by radiation therapy in order to prevent further rebleeding. Fortunately, their symptoms gradually subsided, and both of them were doing well 2 years and one and a half years respectively after radiation therapy. The value of radiation therapy for this disease entity has not yet been established, but it may be worthwhile when the symptoms are worsening and there is no other suitable treatment. (J.P.N.)

  10. Epidemiology of non-fatal cerebrovascular stroke and transient ischemic attacks in Al Quseir, Egypt

    Directory of Open Access Journals (Sweden)

    El-Tallawy HN

    2013-11-01

    Full Text Available Hamdy N El-Tallawy,1 Wafaa MA Farghaly,1 Ghaydaa A Shehata,1 Nabil M Abdel-Hakeem,2 Tarek A Rageh,1 Reda Badry,1 Mahmoud R Kandil1 1Department of Neurology and Psychiatry, Faculty of Medicine, Assiut University Hospital, 2Department of Neurology, Faculty of Medicine, Al-Azhar University, Assiut branch, Assuit, Egypt Background and purpose: Stroke is a medical emergency that can cause permanent neurological damage, complications, and disability. We aim to determine the epidemiology of non-fatal cerebrovascular stroke (CVS and transient ischemic attacks (TIAs in Al Quseir City, Red Sea, Egypt. Methods: The total population (n=33,285 was screened through a door to door study by three specialists of neurology and 15 female social workers (for demographic data collection. All suspected stroke patients were subjected to a full clinical examination, computerized tomography (CT and/or magnetic resonance imaging (MRI of their brain, blood sugar, lipogram, serum uric acid, complete blood cells, blood urea, and serum creatinine, as well as evaluated by Barthel Index and Scandinavian Stroke Scale. Carotid doppler, echocardiography, and thyroid functions were done for selected cases. Results: CVS was recorded among 130 patients out of 19,848 subjects aged 20 years and more, yielding a total prevalence of 6.55/1,000 population. From June 1, 2010 to May 31, 2011, 36 patients were recorded to have stroke within 1-year, yielding an incidence rate of 1.81/1,000. Prevalence and incidence rates were higher among males than females, and both indices increased steadily with advancing age to reach the highest prevalence (37.02/1,000 and incidence rate (9.5/1,000 among aged persons 60 years and more. Conclusion: The prevalence of non-fatal stroke in Al Quseir city (6.55/1,000 was at the lower range of that recorded in developing countries (5–10/1,000 and slightly higher than that recorded in industrialized countries (5/1,000 population. Ischemic stroke is the most

  11. Television Viewing and Incident Cardiovascular Disease: Prospective Associations and Mediation Analysis in the EPIC Norfolk Study

    Science.gov (United States)

    Wijndaele, Katrien; Brage, Søren; Besson, Hervé; Khaw, Kay-Tee; Sharp, Stephen J.; Luben, Robert; Bhaniani, Amit; Wareham, Nicholas J.; Ekelund, Ulf

    2011-01-01

    Background Although television viewing time is detrimentally associated with intermediate cardiovascular risk factors, the relationship with incident total (i.e. combined fatal and non-fatal) cardiovascular disease (CVD), non-fatal CVD and coronary heart disease is largely unknown. This study examined whether television viewing time is associated with these three outcomes, independently of physical activity energy expenditure and other confounding variables. Methodology/Principal Findings A population-based cohort of 12,608 men and women (aged 61.4±9.0), free from stroke, myocardial infarction and cancer at baseline in 1998–2000 were followed up until 2007 (6.9±1.9 years). Participants self-reported education, smoking, alcohol use, antihypertensive, lipid lowering and antidepressant medication, disease history, total energy intake, sleep duration, physical activity and television viewing. BMI, waist circumference, blood pressure, triglycerides, HDL cholesterol and glycated haemoglobin (HbA1c) were measured by standardized procedures; a clustered metabolic risk score was constructed. Every one hour/day increase in television viewing was associated with an increased hazard for total (HR = 1.06, 95%CI = 1.03–1.08; 2,620 cases), non-fatal CVD (HR = 1.06, 95%CI = 1.03–1.09; 2,134 cases), and coronary heart disease (HR = 1.08, 95%CI = 1.03–1.13; 940 cases), independent of gender, age, education, smoking, alcohol, medication, diabetes status, CVD family history, sleep duration and physical activity energy expenditure. Energy intake, BMI, waist circumference, blood pressure, triglycerides, HDL cholesterol, HbA1c and the clustered metabolic risk score only partially mediated these associations. Conclusions These results indicate that the most prevalent leisure time (sedentary) behaviour, television viewing, independently contributes to increased CVD risk. Recommendations on reducing television viewing time should be considered. PMID

  12. Evaluation of non-HDL cholesterol as a predictor of non-fatal cardiovascular events in a prospective population cohort.

    Science.gov (United States)

    Carbayo Herencia, Julio A; Simarro Rueda, Marta; Palazón Bru, Antonio; Molina Escribano, Francisca; Ponce García, Isabel; Artigao Ródenas, Luis Miguel; Caldevilla Bernardo, David; Divisón Garrote, Juan A; Gil Guillén, Vicente Francisco

    2018-01-27

    Non-HDL cholesterol (non-HDL-C) is becoming relevant both in its participation in cardiovascular risk assessment and as a therapeutic target. The objective of the present study was to assess the independent predictive capacity of both non-HDL-C and LDL-C (the main priority in dyslipidemias to reduce cardiovascular risk), in cardiovascular morbidity in a population-based sample. A prospective cohort study involving 1186 individuals in the non-HDL-C group and 1177 in the LDL-C group, followed for 10.7years (SD=2.2), who had not had any previous cardiovascular event. The predictor variables included in the adjustment were: gender, age, arterial hypertension, diabetes mellitus, smoker status and non-HDL-C in one group. In the other group, consisting of patients presenting TG levels of 400mg/dL, non-HDL-C was replaced by LDL-C. Survival curves (Kaplan-Meier) were calculated and two Cox regression models were applied, one for each group. Non-HDL-C group presented 6.2% of non-fatal cardiovascular episodes during follow-up and the LDL-C group 6.0%. After adjustment, for each 30mg/dL increase in non-HDL-C, the incidence of new non-fatal cardiovascular events increased by 31% (HR=1.31, 95%CI: 1.06-1.61; P=.018) and in the LDL-C group by 27% (HR=1.27, 95%CI: 0.97-1.61, P=.068). After a follow-up of 10.7years, non-HDL-C has been shown in our population as a prognostic factor of non-fatal cardiovascular disease, but not LDL-C, although its HR is close to statistical significance. Copyright © 2017 Sociedad Española de Arteriosclerosis. Publicado por Elsevier España, S.L.U. All rights reserved.

  13. Posttraumatic stress disorder, depression, and non-fatal intentional self-harm in Massachusetts Veterans

    OpenAIRE

    Gradus, Jaimie L; Leatherman, Sarah; Raju, Sanjay; Ferguson, Ryan; Miller, Matthew

    2014-01-01

    Background: The literature on the association between Posttraumatic Stress Disorder (PTSD) and fatal and non-fatal intentional self-harm (ISH) among Veterans who receive care within the Veterans Health Administration (VHA) is limited in scope and contradictory. The current study examines the association between PTSD and non-fatal ISH in a gender-stratified sample of patients who received care at a Massachusetts VHA treatment facility between 2000 and 2008. Methods: VHA electronic medical reco...

  14. Red meat intake is positively associated with non-fatal acute myocardial infarction in the Costa Rica Heart Study.

    Science.gov (United States)

    Wang, Dongqing; Campos, Hannia; Baylin, Ana

    2017-08-01

    The adverse effect of red meat consumption on the risk for CVD is a major population health concern, especially in developing Hispanic/Latino countries in which there are clear trends towards increased consumption. This population-based case-control study examined the associations between total, processed and unprocessed red meat intakes and non-fatal acute myocardial infarction (MI) in Costa Rica. The study included 2131 survivors of a first non-fatal acute MI and 2131 controls individually matched by age, sex and area of residence. Dietary intake was assessed with a FFQ. OR were estimated by using conditional logistic regression. Higher intakes of total and processed red meat were associated with increased odds of acute MI. The OR were 1·31 (95 % CI 1·04, 1·65) and 1·29 (95 % CI 1·01, 1·65) for the highest quintiles of total red meat (median: 110·8 g or 1 serving/d) and processed red meat intake (median: 36·1 g or 5 servings/week), respectively. There were increasing trends in the odds of acute MI with higher total (P trend=0·01) and processed (P trend=0·02) red meat intakes. Unprocessed red meat intake was not associated with increased odds of acute MI. Substitutions of 50 g of alternative foods (fish, milk, chicken without skin and chicken without fat) for 50 g of total, processed and unprocessed red meat were associated with lower odds of acute MI. The positive association between red meat intake and acute MI in Costa Rica highlights the importance of reducing red meat consumption in middle-income Hispanic/Latino populations.

  15. Non-fatal workplace violence workers' compensation claims (1993-1996).

    Science.gov (United States)

    Hashemi, L; Webster, B S

    1998-06-01

    More is known about fatal workplace violence than non-fatal workplace violence (NFWV). This study provides descriptive information on the number and cost of NFWV claims filed with a large workers' compensation carrier. NFWV claims from 51 US jurisdictions were selected either by cause codes or by word search from the accident-description narrative. Claims reported in 1993 through 1996 were analyzed to report the frequency, cost, gender, age, industry, and nature of injury. An analysis of a random sample of 600 claims provided information on perpetrator type, cause of events, and injury mechanism. A total of 28,692 NFWV claims were filed during the study period. No cost was incurred for 32.5% of the claims, and 15.5% received payments for lost work. As a percentage of all claims filed by industry, schools had the highest percentage (11.4%) of NFWV claims, and banking had the highest percentage (11.5%) of cost. The majority of claims in the banking random sample group (93%) were due to stress. In the random sample, 90.3% of claims were caused by criminals (51.8%) or by patients, clients, or customers (38.5%). Only 9.7% were caused by an employee (9.2%) or a personal acquaintance of the employee (0.5%). Employers should acknowledge that NFWV incidents occur, recognize that the majority of perpetrators are criminals or clients rather than employees, and develop appropriate prevention and intervention programs.

  16. Investigating the role of behavioral factors in non-fatal accidents of urban and suburban driver

    Directory of Open Access Journals (Sweden)

    P. Azad

    2015-09-01

    Full Text Available Introduction: Road accidents are of the most important events, which cause death and injury of a large number of people and impose huge economic losses. According to previous studies, human factors are the main cause of traffic accidents. The purpose of this study was to investigate the role of behavioral factors in driving-related non-fatal accidents. Material and Method: The present analytical study was carried out among 150 drivers of urban and suburban transportation system in Yazd province. The research tool was Driver Behavior Questionnaire (DBQ which is consisted of two sections: demographic information and driving behavior. Result: 83/9 % of the participants reported to use safety belt nearly always. The highest deliberate violations, slips, and mistakes were belonged to drivers with age group of 18-25. Moreover, deliberate violations had a significant relationship with rage (P < 0.05. Survey of behavioral factors in terms of vehicle ownership type showed that “deliberate violations” and “slips and mistakes” high among personal bus drivers and state-owned bus drivers, respectively, which shows the significant association between these behavioral factors and ownership type. What is more, rates of deliberate and unintentional violations and slips were higher among those with a history of two times incidents (P < 0.004. Conclusion: The results revealed that behavioral factors such as age, type of vehicle ownership, and accident history played a significant role in occurrence of traffic accidents.

  17. Combined effects of family history of CVD and heart rate on ischemic stroke incidence among Inner Mongolians in China.

    Science.gov (United States)

    Zhou, Yipeng; Tian, Yunfan; Zhong, Chongke; Batu, Buren; Xu, Tian; Li, Hongmei; Zhang, Mingzhi; Wang, Aili; Zhang, Yonghong

    2016-05-01

    This study aimed to evaluate the combined effects of family history of cardiovascular diseases (FHCVD) and heart rate on ischemic stroke incidence among Inner Mongolians in China. A prospective cohort study was conducted among 2589 participants aged 20 years and older from Inner Mongolia, China. The participants were divided into four groups according to status of FHCVD and heart rate and followed up from June 2002 to July 2012. Cox proportional hazards models were used to evaluate the combined effects of FHCVD and heart rate on the incidence of ischemic stroke. A total of 76 ischemic stroke occurred during the follow-up period. The observed ischemic stroke cases tended to be older and male, and had higher prevalence of smoking, drinking, hypertension and FHCVD as well as higher systolic and diastolic blood pressures at baseline compared with those who did not experience ischemic stroke. Age- and gender-adjusted hazard ratio (95% confidence interval) of ischemic stroke in the participants with both FHCVD and heart rate ≥ 80 were 2.89 (1.51-5.53), compared with those without FHCVD and heart rate < 80. After multiple adjustment, the association between ischemic stroke risk and both FHCVD and heart rate ≥ 80 remained statistically significant (hazard ratio, 2.47; 95% confidence interval: 1.22-5.01). Our main finding that participants with both FHCVD and faster heart rate have the highest risk of ischemic stroke suggests that faster heart rate may increase the risk of ischemic stroke among people with FHCVD.

  18. Characteristics of non-fatal self-poisoning in Sri Lanka: a systematic review

    Science.gov (United States)

    2013-01-01

    Background The rate of non-fatal self-poisoning in Sri Lanka has increased in recent years, with associated morbidity and economic cost to the country. This review examines the published literature for the characteristics and factors associated with non-fatal self-poisoning in Sri Lanka. Methods Electronic searches were conducted in Psychinfo, Proquest, Medline and Cochrane databases from inception to October 2011. Results 26 publications (representing 23 studies) were eligible to be included in the review. A majority of studies reported non-fatal self-poisoning to be more common among males, with a peak age range of 10–30 years. Pesticide ingestion was the most commonly used method of non-fatal self-poisoning. However three studies conducted within the last ten years, in urban areas of the country, reported non-fatal self-poisoning by medicinal overdose to be more common, and also reported non-fatal self-poisoning to be more common among females. Interpersonal conflict was the most commonly reported short-term stressor associated with self-poisoning. Alcohol misuse was reported among males who self-poisoned, and data regarding other psychiatric morbidity was limited. Conclusions The findings indicate that pesticide ingestion is the commonest method of non-fatal self-poisoning in Sri Lanka, and it is more common among young males, similar to other Asian countries. However there appears to be an emerging pattern of increasing medicinal overdoses, paralleled by a gender shift towards increased female non-fatal self-poisoning in urban areas. Many non-fatal self-poisoning attempts appear to occur in the context of acute interpersonal stress, with short premeditation, and associated with alcohol misuse in males. Similar to other Asian countries, strategies to reduce non-fatal self-poisoning in Sri Lanka require integrated intervention programs with several key aspects, including culturally appropriate interventions to develop interpersonal skills in young people

  19. A genetic risk score for CAD, psychological stress, and their interaction as predictors of CAD, fatal MI, non-fatal MI and cardiovascular death

    Science.gov (United States)

    Svensson, Thomas; Kitlinski, Mariusz; Engström, Gunnar; Melander, Olle

    2017-01-01

    Background Psychological stress is an independent risk factor for cardiovascular disease (CVD), but the mechanism by which stress is associated with CVD is not entirely understood. Although genetic factors are implied in both stress responsivity and cardiovascular reactivity, no studies to date have investigated their interactions with stress for cardiovascular end points. The objective was to elucidate the association and interactions between a genetic risk score (GRS), individual genetic variants and stress for three cardiovascular end points: coronary artery disease (CAD), fatal myocardial infarction (MI), non-fatal MI, and cardiovascular death. Methods and findings 18,559 participants from the Malmö Diet Cancer Study, a population-based prospective study, were included in the analyses. Cox proportional hazards regression models were used and adjusted for a large number of known predictors of cardiovascular end points. Mean follow-up time in years was 14.6 (CAD; n = 1938), 14.8 (fatal MI; n = 436), 14.8 (non-fatal MI; n = 1108), and 15.1 (cardiovascular death; n = 1071) respectively. GRS was significantly associated with increased risks of CAD (top quartile hazard ratio [HR], 1.72; 95% confidence interval [CI], 1.51–1.96), fatal MI (top quartile HR, 1.62; 95%CI, 1.23–2.15), non-fatal MI (top quartile HR, 1.55; 95%CI, 1.31–1.84), and cardiovascular death (top quartile HR, 1.29; 95%CI, 1.08–1.53). Stress was not independently associated with any end point and did not interact with GRS. Four individual genetic variants interacted unfavorably with stress for end points with mortality outcomes. Conclusion A GRS composed of 50 SNPs and predictive of CAD was found for the first time to also strongly predict fatal MI, non-fatal MI and cardiovascular death. A stress-sensitive component of the GRS was isolated on the basis of individual genetic variants that interacted unfavorably with stress. PMID:28426714

  20. National estimates of non-fatal firearm related injuries other than gunshot wounds

    Science.gov (United States)

    Hootman, J; Annest, J; Mercy, J; Ryan, G; Hargarten, S

    2000-01-01

    Objective—To characterize non-fatal firearm related injuries other than gunshot wounds (non-GSWs) treated in hospital emergency departments in the United States that occur during routine gun handling and recreational use as well as violence related use of a firearm. Methods—Cases were identified through the National Electronic Injury Surveillance System (NEISS). During the study period, 1 January 1993 through 31 December 1996, NEISS consisted of a nationally representative sample of 91 hospitals in the United States having at least six beds and providing 24 hour emergency services. Results—An estimated 65 374, or an average of 16 300 per year, non-fatal, non-GSWs were treated in American hospital emergency departments during the four year study period. Fifty seven per cent of all the non-fatal, non-GSWs were violence related, most of which involved being struck by a firearm. The majority of unintentional non-fatal, non-GSWs were self inflicted and occurred during routine gun handling or recreational use of a firearm; 43% of these injuries resulted from gun recoils. Conclusions—Non-fatal, non-GSWs make a notable contribution to the public health burden of firearm related injuries. Firearm related injury prevention programs should focus on not only the reduction of gunshot wounds but also the reduction of unintentional and violence related non-GSWs. PMID:11144625

  1. Non-fatal self-poisoning across age groups, in Sri Lanka.

    Science.gov (United States)

    Rajapakse, Thilini; Christensen, Helen; Cotton, Sue; Griffiths, Kathleen Margaret

    2016-02-01

    Attempted or non-fatal self-poisoning in common in Sri Lanka, but little is known about variation of psychiatric morbidity and suicidal intent across differing ages. The aim of this study was to investigate factors associated with non-fatal self-poisoning in Sri Lanka across three different age groups (namely 14-24 years, 25-34 years and ≥ 35 years). It was anticipated that the findings of the study would inform and guide development of preventive interventions for non-fatal self-poisoning in this country. 935 participants were interviewed within one week of admission to hospital for medical management of non-fatal self-poisoning, over a consecutive 14-month period. Socio-demographic factors, types of poison ingested, triggers and psychiatric morbidity was examined as a function of age. Results showed that a majority (83%) of participants were aged below 35 years. Younger participants aged aged 25-34 years, and ≥ 35 years), who were more likely to ingest pesticides. Recent interpersonal conflict was a proximal trigger seen in all age groups, but suicidal intent, depression and alcohol use disorders increased with age. The overall study findings indicate that most who carry out acts of non-fatal self-poisoning in Sri Lanka are young (aged age groups, but psychiatric morbidity and suicidal intent is higher in the older age groups, as is pesticide ingestion. Age specific interventions may be efficacious in the prevention of non-fatal self-poisoning in Sri Lanka. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. The association of atopy with incidence of ischemic heart disease, stroke, and diabetes

    DEFF Research Database (Denmark)

    Skaaby, Tea; Husemoen, Lise Lotte Nystrup; Thuesen, Betina Heinsbæk

    2015-01-01

    Allergy is a systemic inflammatory disease that could theoretically affect the risk of cardiovascular disease (CVD) and diabetes through inflammatory pathways or mast cell-induced coronary spasm. Whether allergy is associated with an increased risk of CVD and diabetes is largely unknown. We...... investigated the association between atopy as assessed by IgE sensitization, a well-accepted biomarker of allergy, and incidence of ischemic heart disease, stroke, and diabetes in five Danish population-based cohorts. A total of 14,849 participants were included in the study. Atopy was defined as serum......-specific IgE positivity to inhalant allergens. The Danish National Diabetes Register enabled identification of incident diabetes. Likewise, the Danish Registry of Causes of Death and the Danish National Patient Register provided information on fatal and non-fatal ischemic heart disease and stroke. Data were...

  3. National estimates of non-fatal firearm related injuries other than gunshot wounds

    OpenAIRE

    Hootman, J; Annest, J; Mercy, J; Ryan, G; Hargarten, S

    2000-01-01

    Objective—To characterize non-fatal firearm related injuries other than gunshot wounds (non-GSWs) treated in hospital emergency departments in the United States that occur during routine gun handling and recreational use as well as violence related use of a firearm.

  4. Injury Pattern Among Non-fatal Road Traffic Crash Victims | Gichuhi ...

    African Journals Online (AJOL)

    Objective: To study and analyse the pattern of injuries among non-fatal road traffic crash victims. Design: Retrospective analytical study. Setting: Kenyatta National Hospital, Nairobi over a six-month period from February to July 2004. Subjects: Road traffic crashes victims treated at Kenyatta National Hospital, Nairobi during ...

  5. Further Remarks on Vaccination for Non-Fatal Susceptible-Invective ...

    African Journals Online (AJOL)

    We modify existing SIS model to reflect permanent immunity due to vaccination or previous non-fatal attacks of the disease. The model incorporates information on current and past states of the disease needed by families in deciding on whether to vaccinate or not their children. Of particular interest in the analysis are the ...

  6. Drugs taken in fatal and non-fatal self-poisoning : A study in South London

    NARCIS (Netherlands)

    Neeleman, J; Wessely, S

    This study compared the number and type of substances taken in deliberate self-poisoning with fatal (n=127) and non-fatal (n=521) outcome. The aims were (i) to describe substances typically involved in self-poisoning in England and Wales, (ii) to examine the role of drug 'cocktails' and (iii) to

  7. States with low non-fatal injury rates have high fatality rates and vice-versa.

    Science.gov (United States)

    Mendeloff, John; Burns, Rachel

    2013-05-01

    State-level injury rates or fatality rates are sometimes used in studies of the impact of various safety programs or other state policies. How much does the metric used affect the view of relative occupational risks among U.S. states? This paper uses a measure of severe injuries (fatalities) and of less severe injuries (non-fatal injuries with days away from work, restricted work, or job transfer-DART) to examine that issue. We looked at the correlation between the average DART injury rate (from the BLS Survey of Occupational Injuries and Illnesses) and an adjusted average fatality rate (from the BLS Census of Fatal Occupational Injuries) in the construction sector for states for 2003-2005 and for 2006-2008. The RAND Human Subjects Protection Committee determined that this study was exempt from review. The correlations between the fatal and non-fatal injury rates were between -0.30 and -0.70 for all construction and for the subsector of special trade contractors. The negative correlation was much smaller between the rate of fatal falls from heights and the rate of non-fatal falls from heights. Adjusting for differences in the industry composition of the construction sector across states had minor effects on these results. Although some have suggested that fatal and non-fatal injury rates should not necessarily be positively correlated, no one has suggested that the correlation is negative, which is what we find. We know that reported non-fatal rates are influenced by workers' compensation benefits and other factors. Fatality rates appear to be a more valid measure of risk. Efforts to explain the variations that we find should be undertaken. Copyright © 2012 Wiley Periodicals, Inc.

  8. Spatial clustering of fatal, and non-fatal, suicide in new South Wales, Australia: implications for evidence-based prevention.

    Science.gov (United States)

    Torok, Michelle; Konings, Paul; Batterham, Philip J; Christensen, Helen

    2017-10-06

    Rates of suicide appear to be increasing, indicating a critical need for more effective prevention initiatives. To increase the efficacy of future prevention initiatives, we examined the spatial distribution of suicide deaths and suicide attempts in New South Wales (NSW), Australia, to identify where high incidence 'suicide clusters' were occurring. Such clusters represent candidate regions where intervention is critically needed, and likely to have the greatest impact, thus providing an evidence-base for the targeted prioritisation of resources. Analysis is based on official suicide mortality statistics for NSW, provided by the Australian Bureau of Statistics, and hospital separations for non-fatal intentional self-harm, provided through the NSW Health Admitted Patient Data Collection at a Statistical Area 2 (SA2) geography. Geographical Information System (GIS) techniques were applied to detect suicide clusters occurring between 2005 and 2013 (aggregated), for persons aged over 5 years. The final dataset contained 5466 mortality and 86,017 non-fatal intentional self-harm cases. In total, 25 Local Government Areas were identified as primary or secondary likely candidate regions for intervention. Together, these regions contained approximately 200 SA2 level suicide clusters, which represented 46% (n = 39,869) of hospital separations and 43% (n = 2330) of suicide deaths between 2005 and 2013. These clusters primarily converged on the Eastern coastal fringe of NSW. Crude rates of suicide deaths and intentional self-harm differed at the Local Government Areas (LGA) level in NSW. There was a tendency for primary suicide clusters to occur within metropolitan and coastal regions, rather than rural areas. The findings demonstrate the importance of taking geographical variation of suicidal behaviour into account, prior to development and implementation of prevention initiatives, so that such initiatives can target key problem areas where they are likely to have

  9. A registry-based follow-up study, comparing the incidence of cardiovascular disease in native Danes and immigrants born in Turkey, Pakistan and the former Yugoslavia: do social inequalities play a role?

    Directory of Open Access Journals (Sweden)

    Andreasen Anne H

    2011-08-01

    Full Text Available Abstract Background This study compared the incidence of cardiovascular disease (CVD and acute myocardial infarction (AMI between native Danes and immigrants born in Turkey, Pakistan and the former Yugoslavia. Furthermore, we examined whether different indicators of socioeconomic status (SES, such as employment, income and housing conditions influenced potential differences. Methods In this registry-based follow-up study individuals were identified in a large database that included individuals from two major regions in Denmark, corresponding to about 60% of the Danish population. Incident cases of CVD and AMI included fatal and non-fatal events and were taken from registries. Using Cox regression models, we estimated incidence rates at 5-year follow-up. Results Immigrant men and women from Turkey and Pakistan had an increased incidence of CVD, compared with native Danish men. In the case of AMI, a similar pattern was observed; however, differences were more pronounced. Pakistanis and Turks with a shorter duration of residence had a lower incidence, compared with those of a longer residence. Generally, no notable differences were observed between former Yugoslavians and native Danes. In men, differences in CVD and AMI were reduced after adjustment for SES, in particular, among Turks regarding CVD. In women, effects were particularly reduced among Yugoslavians in the case of CVD and in Turks in the case of CVD and AMI after adjustment for SES. Conclusions In conclusion, country of birth-related differences in the incidence of CVD and AMI were observed. At least some of the differences that we uncovered were results of a socioeconomic effect. Duration of residence also played a certain role. Future studies should collect and test different indicators of SES in studies of CVD among immigrants.

  10. Increased risk of non-fatal myocardial infarction following testosterone therapy prescription in men.

    Directory of Open Access Journals (Sweden)

    William D Finkle

    Full Text Available An association between testosterone therapy (TT and cardiovascular disease has been reported and TT use is increasing rapidly.We conducted a cohort study of the risk of acute non-fatal myocardial infarction (MI following an initial TT prescription (N = 55,593 in a large health-care database. We compared the incidence rate of MI in the 90 days following the initial prescription (post-prescription interval with the rate in the one year prior to the initial prescription (pre-prescription interval (post/pre. We also compared post/pre rates in a cohort of men prescribed phosphodiesterase type 5 inhibitors (PDE5I; sildenafil or tadalafil, N = 167,279, and compared TT prescription post/pre rates with the PDE5I post/pre rates, adjusting for potential confounders using doubly robust estimation.In all subjects, the post/pre-prescription rate ratio (RR for TT prescription was 1.36 (1.03, 1.81. In men aged 65 years and older, the RR was 2.19 (1.27, 3.77 for TT prescription and 1.15 (0.83, 1.59 for PDE5I, and the ratio of the rate ratios (RRR for TT prescription relative to PDE5I was 1.90 (1.04, 3.49. The RR for TT prescription increased with age from 0.95 (0.54, 1.67 for men under age 55 years to 3.43 (1.54, 7.56 for those aged ≥ 75 years (p trend = 0.03, while no trend was seen for PDE5I (p trend = 0.18. In men under age 65 years, excess risk was confined to those with a prior history of heart disease, with RRs of 2.90 (1.49, 5.62 for TT prescription and 1.40 (0.91, 2.14 for PDE5I, and a RRR of 2.07 (1.05, 4.11.In older men, and in younger men with pre-existing diagnosed heart disease, the risk of MI following initiation of TT prescription is substantially increased.

  11. Estimating cost ratio distribution between fatal and non-fatal road accidents in Malaysia

    Science.gov (United States)

    Hamdan, Nurhidayah; Daud, Noorizam

    2014-07-01

    Road traffic crashes are a global major problem, and should be treated as a shared responsibility. In Malaysia, road accident tragedies kill 6,917 people and injure or disable 17,522 people in year 2012, and government spent about RM9.3 billion in 2009 which cost the nation approximately 1 to 2 percent loss of gross domestic product (GDP) reported annually. The current cost ratio for fatal and non-fatal accident used by Ministry of Works Malaysia simply based on arbitrary value of 6:4 or equivalent 1.5:1 depends on the fact that there are six factors involved in the calculation accident cost for fatal accident while four factors for non-fatal accident. The simple indication used by the authority to calculate the cost ratio is doubted since there is lack of mathematical and conceptual evidence to explain how this ratio is determined. The main aim of this study is to determine the new accident cost ratio for fatal and non-fatal accident in Malaysia based on quantitative statistical approach. The cost ratio distributions will be estimated based on Weibull distribution. Due to the unavailability of official accident cost data, insurance claim data both for fatal and non-fatal accident have been used as proxy information for the actual accident cost. There are two types of parameter estimates used in this study, which are maximum likelihood (MLE) and robust estimation. The findings of this study reveal that accident cost ratio for fatal and non-fatal claim when using MLE is 1.33, while, for robust estimates, the cost ratio is slightly higher which is 1.51. This study will help the authority to determine a more accurate cost ratio between fatal and non-fatal accident as compared to the official ratio set by the government, since cost ratio is an important element to be used as a weightage in modeling road accident related data. Therefore, this study provides some guidance tips to revise the insurance claim set by the Malaysia road authority, hence the appropriate method

  12. The Effect of Child Access Prevention Laws on Non-Fatal Gun Injuries

    OpenAIRE

    Jeff DeSimone; Sara Markowitz

    2005-01-01

    Many states have passed child access prevention (CAP) laws, which hold the gun owner responsible if a child gains access to a gun that is not securely stored. Previous CAP law research has focused exclusively on gun-related deaths even though most gun injuries are not fatal. We use annual hospital discharge data from 1988-2001 to investigate whether CAP laws decrease non-fatal gun injuries. Results from Poisson regressions that control for various hospital, county and state characteristics, i...

  13. Job strain, job insecurity, and incident cardiovascular disease in the Women's Health Study: results from a 10-year prospective study.

    Directory of Open Access Journals (Sweden)

    Natalie Slopen

    Full Text Available Research about work-related stressors and cardiovascular disease (CVD has produced mixed findings. Moreover, a paucity of data exists regarding the long-term associations between job strain and job insecurity and CVD among women.We used Cox proportional hazard models to examine the relationship between job strain, job insecurity, and incident CVD over 10 years of follow-up among 22,086 participants in the Women's Health Study (mean age 57±5 years.During 10 years of follow-up there were 170 myocardial infarctions (MI, 163 ischemic strokes, 440 coronary revascularizations, and 52 CVD deaths. In models adjusted for age, race, education, and income, women with high job strain (high demand, low control were 38% more likely to experience a CVD event than their counterparts who reported low job strain (low demand, high control; Rate Ratio (RR = 1.38, 95% Confidence Interval (CI = 1.08-1.77, and women with active jobs (high demand, high control were 38% more likely to experience a CVD event relative to women who reported low job strain (95% CI = 1.07-1.77. Outcome-specific analyses revealed that high job strain predicted non-fatal myocardial infarction (RR = 1.67, CI = 1.04-2.70, and coronary revascularization (RR = 1.41, CI = 1.05-1.90. No evidence of an association between job insecurity and long-term CVD risk was observed.High strain and active jobs, but not job insecurity, were related to increased CVD risk among women. Both job strain and job insecurity were significantly related to CVD risk factors. With the increase of women in the workforce, these data emphasize the importance of addressing job strain in CVD prevention efforts among working women.

  14. Value of CT in the Discrimination of Fatal from Non-Fatal Stercoral Colitis

    International Nuclear Information System (INIS)

    Wu, Cheng Hsien; Huang, Chen Chin; Wang, Li Jen; Wong, Yon Cheng; Wang, Chao Jan; Lo, Wang Chak; Lin, Being Chuan; Wan, Yung Liang; Haueh, Chuen

    2012-01-01

    Clinical presentation and physical signs may be unreliable in the diagnosis of stercoral colitis (SC). This study evaluates the value of computed tomography (CT) in distinguishing fatal from non-fatal SC. Ten patients diagnosed as SC were obtained from inter-specialist conferences. Additional 13 patients with suspected SC were identified via the Radiology Information System (RIS). These patients were divided into two groups; fatal and non-fatal SCs. Their CT images are reviewed by two board-certified radiologists blinded to the clinical data and radiographic reports. SC occurred in older patients and displayed no gender predisposition. There was significant correlation between fatal SC and CT findings of dense mucosa (p 0.017), perfusion defects (p = 0.026), ascites (p = 0.023), or abnormal gas (p = 0.033). The sensitivity, specificity, and accuracy of dense mucosa were 71%, 86%, and 81%, respectively. These figures were 75%, 79%, and 77% for perfusion defects; 75%, 80%, and 78% for ascites; and 50%, 93%, and 78% for abnormal gas, respectively. Each CT sign of mucosal sloughing and pericolonic abscess displayed high specificity of 100% and 93% for diagnosing fatal SC, respectively. However, this did not reach statistical significance in diagnosing fatal SC. CT appears to be valuable in discriminating fatal from non-fatal SC.

  15. Value of CT in the Discrimination of Fatal from Non-Fatal Stercoral Colitis

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Cheng Hsien; Huang, Chen Chin; Wang, Li Jen; Wong, Yon Cheng; Wang, Chao Jan; Lo, Wang Chak; Lin, Being Chuan; Wan, Yung Liang; Haueh, Chuen [Chang Gung Memorial Hospital, Chang Gung University, Taoyuan (China)

    2012-06-15

    Clinical presentation and physical signs may be unreliable in the diagnosis of stercoral colitis (SC). This study evaluates the value of computed tomography (CT) in distinguishing fatal from non-fatal SC. Ten patients diagnosed as SC were obtained from inter-specialist conferences. Additional 13 patients with suspected SC were identified via the Radiology Information System (RIS). These patients were divided into two groups; fatal and non-fatal SCs. Their CT images are reviewed by two board-certified radiologists blinded to the clinical data and radiographic reports. SC occurred in older patients and displayed no gender predisposition. There was significant correlation between fatal SC and CT findings of dense mucosa (p 0.017), perfusion defects (p = 0.026), ascites (p = 0.023), or abnormal gas (p = 0.033). The sensitivity, specificity, and accuracy of dense mucosa were 71%, 86%, and 81%, respectively. These figures were 75%, 79%, and 77% for perfusion defects; 75%, 80%, and 78% for ascites; and 50%, 93%, and 78% for abnormal gas, respectively. Each CT sign of mucosal sloughing and pericolonic abscess displayed high specificity of 100% and 93% for diagnosing fatal SC, respectively. However, this did not reach statistical significance in diagnosing fatal SC. CT appears to be valuable in discriminating fatal from non-fatal SC.

  16. A comparison of non-fatal self-poisoning among males and females, in Sri Lanka.

    Science.gov (United States)

    Rajapakse, Thilini; Griffiths, Kathleen Margaret; Christensen, Helen; Cotton, Sue

    2014-08-08

    In the recent past Sri Lanka has had a high rate of attempted suicide by pesticide ingestion, among both males and females. Recent evidence suggests that these trends in self-poisoning may be changing, with increasing medicinal overdoses and changing gender ratios. In the past, attempted suicide in Sri Lanka has been described as impulsive acts, but research regarding aspects such as suicidal intent is limited, and there has been no comparison between genders. The objective of this study was to describe gender differences in non-fatal self-poisoning in Sri Lanka with respect to substances ingested, triggers, stressors, suicidal intent and psychiatric morbidity. Persons admitted to Teaching Hospital Peradeniya, Sri Lanka, for medical management of non-fatal self-poisoning over a consecutive 14-month period were eligible for the study. Participants were interviewed within one week of admission, with regard to demographic details, poison type ingested, triggers, psychiatric morbidity and suicidal intent. 949 participants were included in the study, of whom 44.2% were males, with a median age of 22 years. Males were significantly more likely to ingest agrochemicals, whereas females were more likely to overdose on pharmaceutical drugs. Interpersonal conflict was a common trigger associated with non-fatal self-poisoning for both males and females. Alcohol use disorders and high suicidal intent were significantly more likely in males. There was no difference in rates of depression between the genders. Multiple regression for both genders separately showed that the presence of depression and higher levels of hopelessness was the strongest predictor of suicidal intent, for both genders. Patterns of non-fatal self-poisoning in Sri Lanka appear to be changing to resemble Western patterns, with females having a greater rate of self-poisoning and more medicinal overdoses than males. Alcohol use disorder is a gender specific risk factor associated with non-fatal self

  17. Non-fatal self-poisoning in Sri Lanka: associated triggers and motivations.

    Science.gov (United States)

    Rajapakse, Thilini; Griffiths, Kathleen Margaret; Christensen, Helen; Cotton, Sue

    2015-11-24

    Attempted or non-fatal self-poisoning is common in Sri Lanka. To date, most preventive strategies have focused on limitation of access to toxic pesticides, which has reduced the rates of fatal self-poisoning. However the ongoing phenomenon of non-fatal self-poisoning indicates the need for exploration of alternate preventive strategies. Self-poisoning in Sri Lanka has been described as impulsive, with little premeditation, but the motivations associated with this act have not been studied in depth. This research describes the triggers and motivations associated with non-fatal self-poisoning in Sri Lanka. It is anticipated that the findings would help guide future preventive strategies. Two studies were carried out, at Teaching Hospital Peradeniya, Sri Lanka, each using a different methodology - Study 1 consisted of qualitative semi-structured interviews, and Study 2 was a cross sectional survey. Both studies were conducted among those who had recently attempted self-poisoning, and explored associated triggers and motivations associated with the act of self-poisoning. There was no overlap between participants of the two studies. A total of 24 persons participated in the semi-structured interviews (Study 1), and 921 took part in the cross-sectional survey (Study 2). Interpersonal conflict was the most common trigger prior to the act of non-fatal self-poisoning. A mixture of motivations was associated with the act of self-poisoning, including intent to die, to escape, and difficulty tolerating distress associated with interpersonal conflict. Development of interpersonal skills and interpersonal problem solving skills, particularly in adolescents and young people, emerges as a key primary preventive strategy. Further, there is value in exploring and helping people to develop more adaptive strategies to cope with emotional distress associated with interpersonal conflict. While distress tolerance and interpersonal skill training strategies used in the West may be

  18. Emprego em serviços domésticos e acidentes de trabalho não fatais Housemaids and non-fatal occupational injuries

    Directory of Open Access Journals (Sweden)

    Vilma S Santana

    2003-02-01

    Full Text Available OBJETIVO: Estimar a incidência anual de acidentes não fatais de acordo com variáveis sociodemográficas e ocupacionais entre empregadas em serviços domésticos. MÉTODOS: Inquérito de base comunitária conduzido com 1.650 mulheres de 10 a 65 anos de idade, que referiram ter atividade remunerada e que compunham uma amostra aleatória por conglomerados dos domicílios da cidade de Salvador, capital da Bahia. Os dados foram obtidos por meio de questionários individuais sobre condições de vida, trabalho e saúde. Foi utilizado o teste Exato de Fisher para diferenças de freqüências. RESULTADOS: Estimou-se a incidência anual de acidentes de trabalho não fatais em 5,0%, maior entre as empregadas em serviços domésticos (7,3% do que entre as demais trabalhadoras (4,5%, diferença estatisticamente significante (pOBJECTIVE: To estimate the annual incidence of non-fatal work injuries according to sociodemographic and occupational variables among housemaids. METHODS: A community-based survey was conducted in a population of 1,650 women aged 10 to 65 years who reported a paid occupation randomly selected in a household sample of the city of Salvador, Brazil. Data was collected through individual questionnaires on living and work conditions and health status. Fisher Exact test was performed for frequency analysis. RESULTS: It was estimated an overall annual incidence of non-fatal work injuries in the study population of 5.0%, which was statistically significant (p<0.05 higher among housemaids (7.3% than in the group with other occupations (4.5%. Half of the injuries among housemaids were not related with long-term disabilities, and 38.1% women referred not being able to work for two weeks on average after the injury. CONCLUSIONS: Housemaids represent a major contingent of the work force in Brazil and other Latin America countries. The high incidence of non-fatal work injuries in this working group reveals its public health relevance and the need

  19. Fatal and non-fatal fire injuries in England 1995-2004: time trends and inequalities by age, sex and area deprivation.

    Science.gov (United States)

    Mulvaney, C; Kendrick, D; Towner, E; Brussoni, M; Hayes, M; Powell, J; Robertson, S; Ward, H

    2009-03-01

    To examine time trends and deprivation gradients in fire-related deaths and injuries. A cross-sectional study and time trend analysis using data on fire casualties in England between 1995 and 2004 obtained from the Department for Communities and Local Government. Injury rates were calculated assuming a Poisson distribution. Incidence rate ratios (IRRs) were calculated to compare changes in deprivation gradients over time. There were significant reductions in fatal and non-fatal fire injuries in children (fatal injuries IRR chi(2)(1) = 11.18, P fire deaths were most commonly caused by smokers' materials (e.g. cigarettes, cigars and tobacco), and cigarette lighters and matches, respectively. Cooking appliances caused most non-fatal fire injuries. Injury rates increased with increasing levels of deprivation and deprivation gradients did not change over 10 years. Fire prevention interventions should promote the safe use of cooking and heating appliances and the responsible use of smokers' materials, lighters and matches, and should target those at greater risk of fire, including the socially disadvantaged.

  20. Utility of a Work Process Classification System for characterizing non-fatal injuries in the Alaskan commercial fishing industry

    Directory of Open Access Journals (Sweden)

    Laura N. Syron

    2016-01-01

    Full Text Available Background: The US commercial fishing industry is hazardous, as measured by mortality data. However, research on non-fatal injuries is limited. Non-fatal injuries constitute the majority of occupational injuries and can result in workers’ lowered productivity and wages, lost quality of life, and disability. In the United States, a Work Process Classification System (WPCS has previously been applied in Alaskan freezer-trawl and freezer-longline fleets to identify causes of injuries and specific hazards, but not to other fishing fleets. Objectives: This descriptive epidemiologic study aimed to explore the application and modification of the WPCS in multiple Alaskan fleets, characterize non-fatal occupational injuries in these fleets, and identify work processes that could be targeted for further investigation and future injury prevention efforts. Design: Traumatic, non-fatal injuries on-board Alaskan commercial fishing vessels were identified through United States Coast Guard investigative reports. Characteristics of injuries, as well as worker characteristics, were analysed. Injuries were coded using the WPCS. Results: We successfully utilized the WPCS to code non-fatal injury cases (n = 136. The most frequent main work processes associated with non-fatal injuries included: on-board trawlers, handling frozen fish and processing the catch; on-board vessels using pot/trap gear, handling the gear and shooting/setting the gear; on-board longliners, traffic on board and hauling the gear; and on-board processor vessels, processing the catch, other work with the catch, and handling frozen fish. Conclusions: The study confirmed that a WPCS can be applied to multiple Alaskan fleets to identify hazardous tasks. Hazards were unique for each vessel gear type. Future injury prevention efforts should target work processes associated with the most frequent and most severe injuries. Future studies should establish time estimates for work processes in order to

  1. Utility of a Work Process Classification System for characterizing non-fatal injuries in the Alaskan commercial fishing industry.

    Science.gov (United States)

    Syron, Laura N; Lucas, Devin L; Bovbjerg, Viktor E; Bethel, Jeffrey W; Kincl, Laurel D

    2016-01-01

    The US commercial fishing industry is hazardous, as measured by mortality data. However, research on non-fatal injuries is limited. Non-fatal injuries constitute the majority of occupational injuries and can result in workers' lowered productivity and wages, lost quality of life, and disability. In the United States, a Work Process Classification System (WPCS) has previously been applied in Alaskan freezer-trawl and freezer-longline fleets to identify causes of injuries and specific hazards, but not to other fishing fleets. This descriptive epidemiologic study aimed to explore the application and modification of the WPCS in multiple Alaskan fleets, characterize non-fatal occupational injuries in these fleets, and identify work processes that could be targeted for further investigation and future injury prevention efforts. Traumatic, non-fatal injuries on-board Alaskan commercial fishing vessels were identified through United States Coast Guard investigative reports. Characteristics of injuries, as well as worker characteristics, were analysed. Injuries were coded using the WPCS. We successfully utilized the WPCS to code non-fatal injury cases (n = 136). The most frequent main work processes associated with non-fatal injuries included: on-board trawlers, handling frozen fish and processing the catch; on-board vessels using pot/trap gear, handling the gear and shooting/setting the gear; on-board longliners, traffic on board and hauling the gear; and on-board processor vessels, processing the catch, other work with the catch, and handling frozen fish. The study confirmed that a WPCS can be applied to multiple Alaskan fleets to identify hazardous tasks. Hazards were unique for each vessel gear type. Future injury prevention efforts should target work processes associated with the most frequent and most severe injuries. Future studies should establish time estimates for work processes in order to determine risk estimates. Efforts to improve non-fatal injury reporting

  2. Metabolic syndrome, adherence to the Mediterranean diet and 10-year cardiovascular disease incidence: The ATTICA study.

    Science.gov (United States)

    Kastorini, Christina-Maria; Panagiotakos, Demosthenes B; Chrysohoou, Christina; Georgousopoulou, Ekavi; Pitaraki, Evangelia; Puddu, Paolo Emilio; Tousoulis, Dimitrios; Stefanadis, Christodoulos; Pitsavos, Christos

    2016-03-01

    To better understand the metabolic syndrome (MS) spectrum through principal components analysis and further evaluate the role of the Mediterranean diet on MS presence. During 2001-2002, 1514 men and 1528 women (>18 y) without any clinical evidence of CVD or any other chronic disease, at baseline, living in greater Athens area, Greece, were enrolled. In 2011-2012, the 10-year follow-up was performed in 2583 participants (15% of the participants were lost to follow-up). Incidence of fatal or non-fatal CVD was defined according to WHO-ICD-10 criteria. MS was defined by the National Cholesterol Education Program Adult Treatment panel III (revised NCEP ATP III) definition. Adherence to the Mediterranean diet was assessed using the MedDietScore (range 0-55). Five principal components were derived, explaining 73.8% of the total variation, characterized by the: a) body weight and lipid profile, b) blood pressure, c) lipid profile, d) glucose profile, e) inflammatory factors. All components were associated with higher likelihood of CVD incidence. After adjusting for various potential confounding factors, adherence to the Mediterranean dietary pattern for each 10% increase in the MedDietScore, was associated with 15% lower odds of CVD incidence (95%CI: 0.71-1.06). For the participants with low adherence to the Mediterranean diet all five components were significantly associated with increased likelihood of CVD incidence. However, for the ones following closely the Mediterranean pattern positive, yet not significant associations were observed. Results of the present work propose a wider MS definition, while highlighting the beneficial role of the Mediterranean dietary pattern. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  3. Early morning awakening and nonrestorative sleep are associated with increased minor non-fatal accidents during work and leisure time.

    Science.gov (United States)

    Chiu, Hsiao-Yean; Wang, Mei-Yeh; Chang, Cheng-Kuei; Chen, Ching-Min; Chou, Kuei-Ru; Tsai, Jen-Chen; Tsai, Pei-Shan

    2014-10-01

    The relationship between a composite measure of insomnia and occupational or fatal accidents has been investigated previously; however, little is known regarding the effect of various insomnia symptoms on minor non-fatal accidents during work and leisure time. We investigated the predicting role of insomnia symptoms on minor non-fatal accidents during work and leisure time. Data from the 2005 Taiwan Social Development Trend Survey of 36,473 Taiwanese aged ≥18 years were analyzed in 2013. Insomnia symptoms, including difficulty in initiating sleep (DIS), difficulty in maintaining sleep (DMS), early morning awakening (EMA), and nonrestorative sleep (NRS) were investigated. A minor non-fatal accident was defined as any mishap such as forgetting to turn off the gas or faucets, accidental falls, and abrasions or cuts occurring during work and leisure time in the past month that do not require immediate medical attention. Multivariable logistic regression was performed to assess the odds ratios (ORs) and associated 95% confidence interval (CI) of minor non-fatal accidents (as a binary variable) for each insomnia symptom compared with those of people presenting no symptoms, while controlling for possible confounders. EMA and NRS increased the odds of minor non-fatal accidents occurring during work and leisure time (adjusted OR=1.19, 95% CI=1.08-1.32 and adjusted OR=1.27, 95% CI=1.17-1.37, respectively). EMA and NRS are two symptoms that are significantly associated with an increased likelihood of minor non-fatal accidents during work and leisure time after adjusting for of a range of covariates. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Patterns and temporal trends of comorbidity among adult patients with incident cardiovascular disease in the UK between 2000 and 2014: A population-based cohort study.

    Science.gov (United States)

    Tran, Jenny; Norton, Robyn; Conrad, Nathalie; Rahimian, Fatemeh; Canoy, Dexter; Nazarzadeh, Milad; Rahimi, Kazem

    2018-03-01

    Multimorbidity in people with cardiovascular disease (CVD) is common, but large-scale contemporary reports of patterns and trends in patients with incident CVD are limited. We investigated the burden of comorbidities in patients with incident CVD, how it changed between 2000 and 2014, and how it varied by age, sex, and socioeconomic status (SES). We used the UK Clinical Practice Research Datalink with linkage to Hospital Episode Statistics, a population-based dataset from 674 UK general practices covering approximately 7% of the current UK population. We estimated crude and age/sex-standardised (to the 2013 European Standard Population) prevalence and 95% confidence intervals for 56 major comorbidities in individuals with incident non-fatal CVD. We further assessed temporal trends and patterns by age, sex, and SES groups, between 2000 and 2014. Among a total of 4,198,039 people aged 16 to 113 years, 229,205 incident cases of non-fatal CVD, defined as first diagnosis of ischaemic heart disease, stroke, or transient ischaemic attack, were identified. Although the age/sex-standardised incidence of CVD decreased by 34% between 2000 to 2014, the proportion of CVD patients with higher numbers of comorbidities increased. The prevalence of having 5 or more comorbidities increased 4-fold, rising from 6.3% (95% CI 5.6%-17.0%) in 2000 to 24.3% (22.1%-34.8%) in 2014 in age/sex-standardised models. The most common comorbidities in age/sex-standardised models were hypertension (28.9% [95% CI 27.7%-31.4%]), depression (23.0% [21.3%-26.0%]), arthritis (20.9% [19.5%-23.5%]), asthma (17.7% [15.8%-20.8%]), and anxiety (15.0% [13.7%-17.6%]). Cardiometabolic conditions and arthritis were highly prevalent among patients aged over 40 years, and mental illnesses were highly prevalent in patients aged 30-59 years. The age-standardised prevalence of having 5 or more comorbidities was 19.1% (95% CI 17.2%-22.7%) in women and 12.5% (12.0%-13.9%) in men, and women had twice the age

  5. Fatal and non-fatal injury outcomes: results from a purposively sampled census of seven rural subdistricts in Bangladesh.

    Science.gov (United States)

    Alonge, Olakunle; Agrawal, Priyanka; Talab, Abu; Rahman, Qazi S; Rahman, Akm Fazlur; Arifeen, Shams El; Hyder, Adnan A

    2017-08-01

    90% of the global burden of injuries is borne by low-income and middle-income countries (LMICs). However, details of the injury burden in LMICs are less clear because of the scarcity of data and population-based studies. The Saving of Lives from Drowning project, implemented in rural Bangladesh, did a census on 1·2 million people to fill this gap. This Article describes the epidemiology of fatal and non-fatal injuries from the study. In this study, we used data from the baseline census conducted as part of the Saving of Lives from Drowning (SoLiD) project. The census was implemented in 51 unions from seven purposively sampled rural subdistricts of Bangladesh between June and November, 2013. Sociodemographic, injury mortality, and morbidity information were collected for the whole population in the study area. We analysed the data for descriptive measures of fatal and non-fatal injury outcomes. Age and gender distribution, socioeconomic characteristics, and injury characteristics such as external cause, intent, location, and body part affected were reported for all injury outcomes. The census covered a population of 1 169 593 from 270 387 households and 451 villages. The overall injury mortality rate was 38 deaths per 100 000 population per year, and 104 703 people sustained major non-fatal injuries over a 6-month recall period. Drowning was the leading external cause of injury death for all ages, and falls caused the most number of non-fatal injuries. Fatal injury rates were highest in children aged 1-4 years. Non-fatal injury rates were also highest in children aged 1-4 years and those aged 65 years and older. Males had more fatal and non-fatal injuries than females across all external causes except for burns. Suicide was the leading cause of injury deaths in individuals aged 15-24 years, and more than 50% of the suicides occurred in females. The home environment was the most common location for most injuries. The burden of fatal and non-fatal injuries

  6. [Prevalence of non-fatal road traffic injuries in Mexico: results from ENSANUT 2006].

    Science.gov (United States)

    Avila-Burgos, Leticia; Medina-Solís, Carlo E; Pérez-Núñez, Ricardo; Híjar-Medina, Martha; Aracena-Genao, Belkis; Hidalgo-Solórzano, Elisa; Palma-Coca, Oswaldo

    2008-01-01

    To determine non-fatal road traffic injuries (NFRTI) prevalence and its distribution in Mexico. Data from ENSANUT Survey 2006 were used. Using simple random sampling, one adult, one adolescent and one child were selected in each household, constituting a final sample of 94,197 representing an N of 102,886,482 people. The dependent variable was the prevalence of road traffic injuries (RTI) during the 12 months prior to the survey. The general accident prevalence was 6.0%; 16.7% corresponded to NFRTI. Men in the 20 to 44 age group living in urban areas and with high socioeconomic status had a higher RTI prevalence (p<0.05). Jalisco, Aguascalientes and Sonora were states with the highest prevalence of RTI, while Guerrero, Michoacan and Oaxaca were those with the lowest. NFRTI are frequent in Mexico and they are concentrated among men in productive ages in urban areas; they are associated with socioeconomic status at the individual level and with the state's development at the population level.

  7. Hair 32P measurement for body dose mapping in non-fatal exposures to fast neutrons.

    Science.gov (United States)

    Mianji, Fereidoun A; Jafari, Sheyda; Zaryouni, Saiedeh; Hajizadeh, Bardia

    2015-03-01

    Dosimetry bioassay methods are the backbone of a personal dosimetry in criticality accidents. Although methods like hair dosimetry and the use of activation foils (e.g., (32)S) have been employed for decades, capabilities of different techniques, effects of hair type and neutron spectrum on the dose response, sensitivity and uncertainties of different techniques, etc., need more investigations. For this reason, the use of the (32)S(n,p)(32)P reaction and hair samples for estimating non-fatal doses from fast neutrons was studied. The experiments were carried out with the hair samples attached on a RANDO phantom in a Cf-252 neutron field, in the dose range of about 0.05-1.15 Gy. In addition, the adequate post-accident preparation for hair samples including optimum conditioning and timing were investigated. Experimental results prove the good sensitivity and merit of the method for neutron quantification in the mentioned dose range for which other bioassay methods are of poor resolution and sensitivity. A rough estimation of the dose-response curve for Iranian hair was also derived.

  8. Risk factors for non-fatal occupational injuries among construction workers: A case-control study.

    Science.gov (United States)

    Khashaba, E; El-Helaly, M; El-Gilany, A H; Motawei, S M; Foda, S

    2018-02-01

    Substance abuse is a serious problem, because it affects both workers and young people. Prevalence and consequences of cannabis abuse among construction workers in particular are not well studied in Egypt. To determine the association between non-fatal occupational injuries among construction workers and their demographic and occupational factors and to assess the frequency of cannabis abuse and its relationship to injury severity and workdays lost. A case-control study was conducted at Mansoura Emergency Hospital. Cases were 100 acutely injured male workers. A control group of 90 healthy age-matched workers was selected from 8 construction sites. Workers were interviewed, and a questionnaire was completed that included socio-demographic data, full occupational history, and causes and type of injury. Injury outcome measures included lost workdays and the injury severity score (ISS). Cannabis abuse in injured workers was monitored by preliminary testing of urine and confirmatory testing of blood. Logistic regression analysis revealed that the independent predictors of occupational injuries were rural residence, being a carpenter or painter and past history of injuries. The most common accidents were slipping falls (62%). Confirmed cannabis test was positive in 51.1% of the injured workers. Median days away from work were greater among cannabis users than non-users. The ISS was significantly higher among users compared to non-users ( p abuse can increase injury severity and prolong workdays lost. Drug testing is recommended for at-risk construction workers with inadequate safety measures.

  9. Changing trends in US injury profiles: revisiting non-fatal occupational injury statistics.

    Science.gov (United States)

    Subramanian, A; Desai, A; Prakash, L; Mital, A; Mital, Anil

    2006-03-01

    The purpose of this paper is to review the current trends in non-fatal injury profiles of workers in the United States. It is generally accepted that occupational injury and illness rates are affected by many factors, such as the amount and quality of training, employee turnover rates, work experience, extent of mechanization and automation, job-related parameters, and worker gender. In the last decade, not only have the technologies used in the workplace changed significantly, there has been a greater awareness among employers and employees as to the importance of containing work injuries. Additionally, the extent of outsourcing for labor-intensive jobs has increased dramatically owing to cheaper labor costs in places such as China and Mexico. These changes have affected the manufacturing sector of US industry more than any other sector. How these changes have influenced the injury and illness profiles of the American worker is of considerable interest given the increased attention paid to work-workplace design, injury hazard control, and ergonomics in general. In this paper, we compare the injury and illness profiles of US workers separated by nearly a decade. The trends from early 1990s are compared to those from early 2000s. Data from the Bureau of Labor Statistics were used to compile the injury statistics. The results of our comparison show that while the absolute numbers of work-related injuries and illnesses have declined over the last 10 years, the basic trends associated with different factors remain almost unchanged. The reasons for this decline are discussed in this paper.

  10. A non-fatal case of invasive zygomycete (Lichtheimia corymbifera) infection in an allogeneic haematopoietic cell transplant recipient

    DEFF Research Database (Denmark)

    Eickhardt, Steffen; Braendstrup, Peter; Clasen-Linde, Erik

    2013-01-01

    Post-transplant infections in allogeneic haematopoietic cell transplant (allo-HCT) recipients often have severe consequences. This is especially the case when dealing with zygomycete infections where the result is often fatal. A major problem when dealing with zygomycete infections is the need...... for an accurate and fast diagnosis as the phylum is highly resistant towards the conventional antifungals. We herein describe a non-fatal case of Lichtheimia corymbifera infection in an allo-HCT recipient....

  11. Population based case–control study of serious non-fatal motorcycle crashes

    Science.gov (United States)

    2013-01-01

    risk. The relationship between rider factors and travel speed generally will be assessed by multivariate regression methods. Discussion In the context of the changing motorcycling environment, this study will provide evidence on contemporary risk factors for serious non-fatal motorcycle crashes. PMID:23351603

  12. Left ventricular hypertrophy and risk of fatal and non-fatal stroke EUROSTROKE: a collaborative study among research centres in Europe

    NARCIS (Netherlands)

    M.L. Bots (Michiel); J. Tuomilehto; D.E. Grobbee (Diederick); P.J. Koudstaal (Peter Jan); Y. Nikitin; J.T. Salonen; P.C. Elwood; S. Malyutina; A. Freire de Concalves; J. Sivenius; A. di Carlo; P. Lagiou

    2002-01-01

    textabstractBACKGROUND: This study investigated the association between electrocardiographically assessed left ventricular hypertrophy (LVH) and fatal, non-fatal, haemorrhagic and ischaemic stroke in four European cohorts participating in EUROSTROKE. METHODS: EUROSTROKE is a

  13. Epidemiology of non-fatal injuries due to external causes in ...

    African Journals Online (AJOL)

    1991-04-20

    tween 1989 and 1990 in the course of 271 hospital ward rounds and 43 casualty watches. The overall trauma incidence was 2886 new cases per annum per 100000 population, rising to 19872 for coloured males aged 20 - 24.

  14. Impact of First Aid on Treatment Outcomes for Non-Fatal Injuries in Rural Bangladesh: Findings from an Injury and Demographic Census.

    Science.gov (United States)

    Hoque, Dewan Md Emdadul; Islam, Md Irteja; Sharmin Salam, Shumona; Rahman, Qazi Sadeq-Ur; Agrawal, Priyanka; Rahman, Aminur; Rahman, Fazlur; El-Arifeen, Shams; Hyder, Adnan A; Alonge, Olakunle

    2017-07-12

    Non-fatal injuries have a significant impact on disability, productivity, and economic cost, and first-aid can play an important role in improving non-fatal injury outcomes. Data collected from a census conducted as part of a drowning prevention project in Bangladesh was used to quantify the impact of first-aid provided by trained and untrained providers on non-fatal injuries. The census covered approximately 1.2 million people from 7 sub-districts of Bangladesh. Around 10% individuals reported an injury event in the six-month recall period. The most common injuries were falls (39%) and cuts injuries (23.4%). Overall, 81.7% of those with non-fatal injuries received first aid from a provider of whom 79.9% were non-medically trained. Individuals who received first-aid from a medically trained provider had more severe injuries and were 1.28 times more likely to show improvement or recover compared to those who received first-aid from an untrained provider. In Bangladesh, first-aid for non-fatal injuries are primarily provided by untrained providers. Given the large number of untrained providers and the known benefits of first aid to overcome morbidities associated with non-fatal injuries, public health interventions should be designed and implemented to train and improve skills of untrained providers.

  15. The contribution of respiratory pathogens to fatal and non-fatal respiratory hospitalizations: a pilot study of Taqman Array Cards (TAC) in Kenya.

    Science.gov (United States)

    Njuguna, Henry N; Chaves, Sandra S; Emukule, Gideon O; Nyawanda, Bryan; Omballa, Victor; Juma, Bonventure; Onyango, Clayton O; Mott, Joshua A; Fields, Barry

    2017-08-25

    Respiratory diseases cause substantial morbidity and mortality worldwide, with sub-Saharan Africa bearing the greatest burden. Identifying etiologies of respiratory disease is important to inform cost effective treatment, prevention and control strategies. Testing for all of the different pathogens that are potentially associated with respiratory illnesses is challenging. We piloted the use of a multi-pathogen respiratory Taqman Array Cards (TAC) to identify pathogens in respiratory samples collected from non-fatal and fatal cases and their matched asymptomatic controls. This is a case control study comparing viral and bacterial pathogens detected among non-fatal and fatal cases to those detected among age and time matched asymptomatic controls. We used McNemar's test to compare proportions of pathogens detected among cases (non-fatal and fatal) to their matched asymptomatic controls. We used Mann-Whitney test to compare the distribution of median Cycle threshold (Ct) values among non-fatal and fatal cases to their corresponding asymptomatic controls. There were 72 fatal and 72 non-fatal cases matched to 72 controls. We identified at least one pathogen in 109/144 (76%) cases and 59/72 (82%) controls. For most pathogens, the median Ct values were lower among cases (fatal and non-fatal) compared to asymptomatic controls. Similar rates of pathogen detection among cases and controls make interpretation of results challenging. Ct-values might be helpful in interpreting clinical relevance of detected pathogens using multi-pathogen diagnostic tools.

  16. A non-fatal case of invasive zygomycete (Lichtheimia corymbifera) infection in an allogeneic haematopoietic cell transplant recipient.

    Science.gov (United States)

    Eickhardt, Steffen; Braendstrup, Peter; Clasen-Linde, Erik; Jensen, Karl E; Alhede, Morten; Bjarnsholt, Thomas; Høiby, Niels; Vindeløv, Lars; Moser, Claus

    2013-05-01

    Post-transplant infections in allogeneic haematopoietic cell transplant (allo-HCT) recipients often have severe consequences. This is especially the case when dealing with zygomycete infections where the result is often fatal. A major problem when dealing with zygomycete infections is the need for an accurate and fast diagnosis as the phylum is highly resistant towards the conventional antifungals. We herein describe a non-fatal case of Lichtheimia corymbifera infection in an allo-HCT recipient. © 2012 The Authors APMIS © 2012 APMIS.

  17. Mental Health Symptomatology and Exposure to Non-Fatal Suicidal Behavior: Factors That Predict Vulnerability and Resilience Among College Students.

    Science.gov (United States)

    Bottomley, Jamison S; Abrutyn, Seth; Smigelsky, Melissa A; Neimeyer, Robert A

    2017-11-07

    Despite efforts to identify risk factors following exposure to completed suicide, research has paid less attention to the associations between exposure to non-fatal suicide behavior (NFSB) and mental health symptomatology-factors that may underlie one's susceptibility to future suicidal thoughts and behaviors. This study examined differences in mental health symptomatology among 192 college students exposed to NFSB and 202 exposed to general stressors. Results indicated that students exposed to NFSB had significantly higher levels of depression and anxiety compared to those exposed to a variety of other stressors but not NFSB. Furthermore, among those exposed, a number of risk and protective factors emerged in relation to psychological sequelae, such as emotional stability, social support, and the quality of the relationship between the exposed and suicidal individual. These findings highlight the importance of enhancing provisions of support for those exposed to NFSB.

  18. Epidemiology and trends in non-fatal self-harm in three centres in England: 2000-2007.

    Science.gov (United States)

    Bergen, Helen; Hawton, Keith; Waters, Keith; Cooper, Jayne; Kapur, Navneet

    2010-12-01

    Self-harm is a common reason for presentation to a general hospital, with a strong association with suicide. Trends in self-harm are an important indicator of community psychopathology, with resource implications for health services and relevance to suicide prevention policy. Previous reports in the UK have come largely from single centres. To investigate trends in non-fatal self-harm in six general hospitals in three centres from the Multicentre Study of Self-harm in England, and to relate these to trends in suicide. Data on self-harm presentations to general hospital emergency departments in Oxford (one), Manchester (three) and Derby (two) were analysed over the 8-year period 1 January 2000 to 31 December 2007. Rates of self-harm declined significantly over 8 years for males in three centres (Oxford: -14%; Manchester: -25%; Derby: -18%) and females in two centres (Oxford: -2% (not significant); Manchester: -13%; Derby: -17%), in keeping with national trends in suicide. A decreasing proportion and number of episodes involved self-poisoning alone, and an increasing proportion and number involved other self-injury (e.g. hanging, jumping, traffic related). Episodes involving self-cutting alone showed a slight decrease in numbers over time. Trends in alcohol use at the time of self-harm and repetition within 1 year were stable. There were decreasing rates of non-fatal self-harm over the study period that paralleled trends in suicide in England. This was reflected mainly in a decline in emergency department presentations for self-poisoning.

  19. Non-fatal injury hospitalizations among Alaska natives, 1994--1999: results from the Alaska Trauma Registry.

    Science.gov (United States)

    Hill, Ryan; Wells, Rebecca S; Andon, Helen; Ballew, Carol

    2004-01-01

    The Alaska Trauma Registry collects data on injuries resulting in hospitalization or transfer to a higher level of care from every hospital in the state. We analyzed non-fatal injuries to Alaska Native and White residents from 1994--1999. Statewide, the five most common causes of injuries to Alaska Natives were falls, suicide attempts, off-road vehicles, motor vehicles, and assaults. These accounted for two-thirds of all injuries; falls accounted for 26.3% of all injuries. For total injuries and for each cause, injury rates were significantly higher for Alaska Natives than Alaska Whites. The greatest discrepancies were for suicide attempts with firearms (Rate Ratio=12.7) and assault by striking (Rate Ratio=8.9). Alcohol was noted on the record of 37.5% of Alaska Native injuries and 15.5% of Alaska White injuries. Alcohol was involved in 60.8% of intentional injuries involving Alaska Natives and 27.1% for Alaska Whites.

  20. The ability of an electrocardiogram to predict fatal and non-fatal cardiac events in asymptomatic middle-aged subjects.

    Science.gov (United States)

    Terho, Henri K; Tikkanen, Jani T; Kenttä, Tuomas V; Junttila, M Juhani; Aro, Aapo L; Anttonen, Olli; Kerola, Tuomas; Rissanen, Harri A; Knekt, Paul; Reunanen, Antti; Huikuri, Heikki V

    2016-11-01

    The long-term prognostic value of a standard 12-lead electrocardiogram (ECG) for predicting cardiac events in apparently healthy middle-aged subjects is not well defined. A total of 9511 middle-aged subjects (mean age 43 ± 8.2 years, 52% males) without a known cardiac disease and with a follow-up 40 years were included in the study. Fatal and non-fatal cardiac events were collected from the national registries. The predictive value of ECG was separately analyzed for 10 and 30 years. Major ECG abnormalities were classified according to the Minnesota code. Subjects with major ECG abnormalities (N = 1131) had an increased risk of cardiac death after 10-years (adjusted hazard ratio [HR] 1.7; 95% confidence interval [95% CI], 1.1-2.5, p = 0.009) and 30-years of follow-up (HR 1.3, 95% CI, 1.1-1.5, p electrocardiogram are shown to have prognostic significance for cardiac events in elderly subjects without known cardiac disease. Our results suggest that ECG abnormalities increase the risk of fatal cardiac events also in middle-aged healthy subjects.

  1. Hair {sup 32}P measurement for body dose mapping in non-fatal exposures to fast neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Mianji, Fereidoun A. [Nuclear Science and Technology Research Institute, Tehran (Iran, Islamic Republic of); Iran Nuclear Regulatory Authority, Tehran (Iran, Islamic Republic of); Jafari, Sheyda; Zaryouni, Saiedeh [Bu-Ali Sina University, Faculty of Science, Hamedan (Iran, Islamic Republic of); Hajizadeh, Bardia [Iran Nuclear Regulatory Authority, Tehran (Iran, Islamic Republic of)

    2015-03-15

    Dosimetry bioassay methods are the backbone of a personal dosimetry in criticality accidents. Although methods like hair dosimetry and the use of activation foils (e.g., {sup 32}S) have been employed for decades, capabilities of different techniques, effects of hair type and neutron spectrum on the dose response, sensitivity and uncertainties of different techniques, etc., need more investigations. For this reason, the use of the {sup 32}S(n,p){sup 32}P reaction and hair samples for estimating non-fatal doses from fast neutrons was studied. The experiments were carried out with the hair samples attached on a RANDO phantom in a Cf-252 neutron field, in the dose range of about 0.05-1.15 Gy. In addition, the adequate post-accident preparation for hair samples including optimum conditioning and timing were investigated. Experimental results prove the good sensitivity and merit of the method for neutron quantification in the mentioned dose range for which other bioassay methods are of poor resolution and sensitivity. A rough estimation of the dose-response curve for Iranian hair was also derived. (orig.)

  2. Disentangling age-gender interactions associated with risks of fatal and non-fatal road traffic injuries in the Sultanate of Oman.

    Science.gov (United States)

    Al-Aamri, Amira K; Padmadas, Sabu S; Zhang, Li-Chun; Al-Maniri, Abdullah A

    2017-01-01

    Road traffic injuries (RTIs) are the leading cause of disability-adjusted life years lost in Oman, Saudi Arabia and United Arab Emirates. Injury prevention strategies often overlook the interaction of individual and behavioural risk factors in assessing the severity of RTI outcomes. We conducted a systematic investigation of the underlying interactive effects of age and gender on the severity of fatal and non-fatal RTI outcomes in the Sultanate of Oman. We used the Royal Oman Police national database of road traffic crashes for the period 2010-2014. Our study was based on 35 785 registered incidents: of these, 10.2% fatal injuries, 6.2% serious, 27.3% moderate, 37.3% mild injuries and 19% only vehicle damage but no human injuries. We applied a generalised ordered logit regression to estimate the effect of age and gender on RTI severity, controlling for risk behaviours, personal characteristics, vehicle, road, traffic, environment conditions and geographical location. The most dominant group at risk of all types of RTIs was young male drivers. The probability of severe incapacitating injuries was the highest for drivers aged 25-29 (26.6%) years, whereas the probability of fatal injuries was the highest for those aged 20-24 (26.9%) years. Analysis of three-way interactions of age, gender and causes of crash show that overspeeding was the primary cause of different types of RTIs. In particular, the probability of fatal injuries among male drivers attributed to overspeeding ranged from 3%-6% for those aged 35 years and above to 13.4% and 17.7% for those aged 25-29 years and 20-24 years, respectively. The high burden of severe and fatal RTIs in Oman was primarily attributed to overspeed driving behaviour of young male drivers in the 20-29 years age range. Our findings highlight the critical need for designing early gender-sensitive road safety interventions targeting young male and female drivers.

  3. Microstructure effects in CVD copper

    Science.gov (United States)

    Manger, Dirk Karl

    Computer chip manufacturers are beginning to implement copper as interconnect material in high-performance microprocessor metallization architectures. Replacing currently used aluminum metallization with its copper based counterpart will result in performance gain due to the low resistivity of copper (1.67muO·cm) which generates a reduction in (resistance x capacitance) signal delay. Futhermore, enhancements in stress and electromigration resistance by up to three orders of magnitude are expected from replacing aluminum with copper. Copper deposited by chemical vapor deposition has the proven ability to yield complete fill of aggressive via and trench structures at high deposition rates. At the same time, ultrathin Cu seed layers can be controlled grown by chemical vapor deposition (CVD) for use as activation layer in electrolytic plating (EP) applications. Additionally, integration studies using single and two-level damascene interconnect structures CVD Cu showed that excellent yield can be obtained. However, before CVD Cu can be incorporated into manufacturing process flows, several key reliability issues have to be addressed and resolved. At present, electroplating has the advantage of enhanced electromigration performance compared to CVD copper. It is therefore necessary to demonstrate the systematic ability to tailor the microstructure of CVD copper with the goal of enhanced electromigration and stress migration performance through the successful formation of (111) textured Cu with bamboo type microstructure. In the present work, the evolution of as-deposited Cu resistivity, grain size, texture, and surface roughness were systematically analyzed as a function of film thickness for an optimized CVD Cu process. In particular, investigations of the influence of substrate type and surface pretreatment on texture and grain size showed that: (a) Cu grows (111) textured on PVD TiN, if (002) Ti matrix is present, and on inorganic CVD TiN, regardless of the underlying

  4. The association of atopy with incidence of ischemic heart disease, stroke, and diabetes.

    Science.gov (United States)

    Skaaby, Tea; Husemoen, Lise Lotte Nystrup; Thuesen, Betina Heinsbæk; Jeppesen, Jørgen; Linneberg, Allan

    2015-03-01

    Allergy is a systemic inflammatory disease that could theoretically affect the risk of cardiovascular disease (CVD) and diabetes through inflammatory pathways or mast cell-induced coronary spasm. Whether allergy is associated with an increased risk of CVD and diabetes is largely unknown. We investigated the association between atopy as assessed by IgE sensitization, a well-accepted biomarker of allergy, and incidence of ischemic heart disease, stroke, and diabetes in five Danish population-based cohorts. A total of 14,849 participants were included in the study. Atopy was defined as serum-specific IgE positivity to inhalant allergens. The Danish National Diabetes Register enabled identification of incident diabetes. Likewise, the Danish Registry of Causes of Death and the Danish National Patient Register provided information on fatal and non-fatal ischemic heart disease and stroke. Data were analyzed by Cox regression analyses with age as underlying time axis and adjusted for study cohort, gender, education, body mass index, alcohol intake, smoking habits, physical activity during leisure time, serum lipids, and blood pressure. The prevalence of atopy was 26.9 % (n = 3,994). There were 1,170, 817, and 1,063 incident cases of ischemic heart disease, stroke, and diabetes, respectively (median follow-up 11.2 years). The hazard ratios, HRs (95 % confidence intervals, CIs) for atopics versus non-atopics: for ischemic heart disease (HR 1.00, 95 % CI 0.86, 1.16), stroke (HR 1.18, 95 % CI 0.99, 1.41), and diabetes (HR 1.06, 95 % CI 0.91, 1.23). Our results did not support the hypothesis that atopy is associated with higher risk of ischemic heart disease, stroke, or diabetes. However, a small-moderately increased risk cannot be excluded from our data.

  5. Non-fatal disease burden associated with excess body mass index and waist circumference in New Zealand adults.

    Science.gov (United States)

    Turley, Maria; Tobias, Martin; Paul, Sue

    2006-06-01

    To describe the relationship between two measures of body fat and selected non-fatal health conditions in the New Zealand adult population in 2003. Data were obtained from the 2002/03 New Zealand Health Survey. A total of 10,026 adults aged 25 years and over were classified according to measured body mass index (BMI) and waist circumference (WC). BMI classes were 18.5-24.9, 25.0-29.9, 30.0-34.9, > or = 35.0 kg/m2. WC classes were 102 centimetres (cm) for males and 88 cm for females. Prevalence rate ratio estimates for selected self-reported health conditions were calculated for males and females separately, adjusting for age, ethnicity, deprivation and smoking using logistic regression. Increasing BMI or WC class was associated with increasing prevalence of cardiovascular disease, diabetes, high blood pressure, high blood cholesterol, osteoarthritis, asthma and sleep disorders in both males and females. The association with depression was not statistically significant in either gender. Associations were strongest for diabetes and blood pressure, with adults in the highest BMI or WC class at least 3.5 times more likely to have diabetes and 2-3 times more likely to have high blood pressure compared with those in the lowest classes. Increasing body fatness, defined by either BMI or WC, was associated with increased prevalence of many important health conditions. If the obesity epidemic is not halted or reversed, the impact on both the New Zealand population and health system will be considerable.

  6. Non-fatal construction industry fall-related injuries treated in US emergency departments, 1998-2005.

    Science.gov (United States)

    Shishlov, Kirill S; Schoenfisch, Ashley L; Myers, Douglas J; Lipscomb, Hester J

    2011-02-01

    There is a growing recognition that common occupational injury surveillance systems in the US fail to reflect true injury risk; this failure limits efforts to accurately monitor efforts to prevent work-related injuries on a national level. Data from the National Electronic Injury Surveillance System occupational supplement (NEISS-Work) were used to describe fall-related injuries treated in US emergency departments among workers in the construction industry (1998-2005). These data do not require workers' compensation as the payer in order to be classified as work-related. Based on NEISS-Work estimates, a total of 555,700 (95% confidence interval (CI): 390,700-720,800) non-fatal work-related injuries among workers in the construction industry were the result of a fall, resulting in an annual rate of 70 (95% CI: 49-91) per 10,000 full-time equivalents. Younger workers had higher rates of falls, whereas older workers were more likely to suffer serious injuries. The majority of the injuries (70%) were precipitated by falls to a lower level from roofs, ladders, and scaffolding. The patterns of fall-related injuries identified in these data are consistent with other reports. In contrast to the declining rates of falls requiring days away from work reported through the Bureau of Labor Statistics Survey of Occupational Injuries and Illnesses, construction industry fall-related injury rates estimated through NEISS-Work remained unchanged from 1998 to 2005 providing another perspective on this serious cause of morbidity in the construction industry. Copyright © 2010 by John Wiley & Sons, Ltd.

  7. Evaluation of CVD silicon carbide for synchrotron radiation mirrors

    International Nuclear Information System (INIS)

    Takacs, P.Z.

    1981-07-01

    Chemical vapor deposited silicon carbide (CVD SiC) is a recent addition to the list of materials suitable for use in the harsh environment of synchrotron radiation (SR) beam lines. SR mirrors for use at normal incidence must be ultrahigh vacuum compatible, must withstand intense x-ray irradiation without surface damage, must be capable of being polished to an extremely smooth surface finish, and must maintain surface figure under thermal loading. CVD SiC exceeds the performance of conventional optical materials in all these areas. It is, however, a relatively new optical material. Few manufacturers have experience in producing optical quality material, and few opticians have experience in figuring and polishing the material. The CVD material occurs in a variety of forms, sensitively dependent upon reaction chamber production conditions. We are evaluating samples of CVD SiC obtained commercially from various manufacturers, representing a range of deposition conditions, to determine which types of CVD material are most suitable for superpolishing. At the time of this writing, samples are being polished by several commercial vendors and surface finish characteristics are being evaluated by various analytical methods

  8. CVD diamond detectors and dosimeters

    International Nuclear Information System (INIS)

    Manfredotti, C.; Fizzotti, F.; LoGiudice, A.; Paolini, C.; Oliviero, P.; Vittone, E.; Torino Univ., Torino

    2002-01-01

    Natural diamond, because of its well-known properties of tissue-equivalence, has recorded a wide spreading use in radiotherapy planning with electron linear accelerators. Artificial diamond dosimeters, as obtained by Chemical Vapour Deposition (CVD) could be capable to offer the same performances and they can be prepared in different volumes and shapes. The dosimeter sensitivity per unit volume may be easily proved to be better than standard ionization microchamber. We have prepared in our laboratory CVD diamond microchamber (diamond tips) in emispherical shape with an external diameter of 200 μm, which can be used both as X-ray beam profilometers and as microdosimeters for small field applications like stereotaxy and also for in vivo applications. These dosimeters, which are obtained on a wire substrate that could be either metallic or SiC or even graphite, display good performances also as ion or synchrotron X-rays detectors

  9. A case-control study of physical activity patterns and risk of non-fatal myocardial infarction

    Directory of Open Access Journals (Sweden)

    Gong Jian

    2013-02-01

    Full Text Available Abstract Background The interactive effects of different types of physical activity on cardiovascular disease (CVD risk have not been fully considered in previous studies. We aimed to identify physical activity patterns that take into account combinations of physical activities and examine the association between derived physical activity patterns and risk of acute myocardial infarction (AMI. Methods We examined the relationship between physical activity patterns, identified by principal component analysis (PCA, and AMI risk in a case-control study of myocardial infarction in Costa Rica (N=4172, 1994-2004. The component scores derived from PCA and total METS were used in natural cubic spline models to assess the association between physical activity and AMI risk. Results Four physical activity patterns were retained from PCA that were characterized as the rest/sleep, agricultural job, light indoor activity, and manual labor job patterns. The light indoor activity and rest/sleep patterns showed an inverse linear relation (P for linearity=0.001 and a U-shaped association (P for non-linearity=0.03 with AMI risk, respectively. There was an inverse association between total activity-related energy expenditure and AMI risk but it reached a plateau at high levels of physical activity (P for non-linearity=0.01. Conclusions These data suggest that a light indoor activity pattern is associated with reduced AMI risk. PCA provides a new approach to investigate the relationship between physical activity and CVD risk.

  10. NEXAFS Study of the Annealing Effect on the Local Structure of FIB-CVD DLC

    International Nuclear Information System (INIS)

    Saikubo, Akihiko; Kato, Yuri; Igaki, Jun-ya; Kanda, Kazuhiro; Matsui, Shinji; Kometani, Reo

    2007-01-01

    Annealing effect on the local structure of diamond like carbon (DLC) formed by focused ion beam-chemical vapor deposition (FIB-CVD) was investigated by the measurement of near edge x-ray absorption fine structure (NEXAFS) and energy dispersive x-ray (EDX) spectra. Carbon K edge absorption NEXAFS spectrum of FIB-CVD DLC was measured in the energy range of 275-320 eV. In order to obtain the information on the location of the gallium in the depth direction, incidence angle dependence of NEXAFS spectrum was measured in the incident angle range from 0 deg. to 60 deg. . The peak intensity corresponding to the resonance transition of 1s→σ* originating from carbon-gallium increased from the FIB-CVD DLC annealed at 200 deg. C to the FIB-CVD DLC annealed at 400 deg. C and decreased from that at 400 deg. C to that at 600 deg. C. Especially, the intensity of this peak remarkably enhanced in the NEXAFS spectrum of the FIB-CVD DLC annealed at 400 deg. C at the incident angle of 60 deg. . On the contrary, the peak intensity corresponding to the resonance transition of 1s→π* originating from carbon double bonding of emission spectrum decreased from the FIB-CVD DLC annealed at 200 deg. C to that at 400 deg. C and increased from that at 400 deg. C to that at 600 deg. C. Gallium concentration in the FIB-CVD DLC decreased from ≅2.2% of the as-deposited FIB-CVD DLC to ≅1.5% of the FIB-CVD DLC annealed at 600 deg. C from the elementary analysis using EDX. Both experimental results indicated that gallium atom departed from FIB-CVD DLC by annealing at the temperature of 600 deg. C

  11. High prevalence of non-fatal overdose among people who inject drugs in Malaysia: Correlates of overdose and implications for overdose prevention from a cross-sectional study.

    Science.gov (United States)

    Bazazi, Alexander R; Zelenev, Alexei; Fu, Jeannia J; Yee, Ilias; Kamarulzaman, Adeeba; Altice, Frederick L

    2015-07-01

    Overdose is the leading cause of death among opioid users, but no data are available on overdose among people who inject drugs in Malaysia. We present the first estimates of the prevalence and correlates of recent non-fatal overdose among people who inject drugs in Malaysia. In 2010, 460 people who inject drugs were recruited using respondent-driven sampling (RDS) in Klang Valley to assess health outcomes associated with injection drug use. Self-reported history of non-fatal overdose in the previous 6 months was the primary outcome. Sociodemographic, behavioral and structural correlates of non-fatal overdose were assessed using multivariable logistic regression. All 460 participants used opioids and nearly all (99.1%) met criteria for opioid dependence. Most injected daily (91.3%) and were male (96.3%) and ethnically Malay (90.4%). Overall, 20% of participants had overdosed in the prior 6 months, and 43.3% had ever overdosed. The RDS-adjusted estimate of the 6-month period prevalence of overdose was 12.3% (95% confidence interval [CI] 7.9-16.6%). Having injected for more years was associated with lower odds of overdose (adjusted odds ratio [AOR] 0.6 per 5 years of injection, CI: 0.5-0.7). Rushing an injection from fear of the police nearly doubled the odds of overdose (AOR 1.9, CI: 1.9-3.6). Alcohol use was associated with recent non-fatal overdose (AOR 2.1, CI: 1.1-4.2), as was methamphetamine use (AOR 2.3, CI: 1.3-4.6). When adjusting for past-month drug use, intermittent but not daily methadone use was associated with overdose (AOR 2.8, CI: 1.5-5.9). This study reveals a large, previously undocumented burden of non-fatal overdose among people who inject drugs in Malaysia and highlights the need for interventions that might reduce the risk of overdose, such as continuous opioid substitution therapy, provision of naloxone to prevent fatal overdose, treatment of polysubstance use, and working with police to improve the risk environment. Copyright © 2014 Elsevier B

  12. Incidence of road traffic accidents and pattern of injury among ...

    African Journals Online (AJOL)

    Background and Objective: Motorcyclists are at high risk of road traffic accidents and the attendant injuries, but few community-based studies have investigated the problem in Nigeria. Therefore, this study was conducted to determine the incidence of accidents and patterns of non-fatal injury among commercial motorcyclists ...

  13. Delaminated Transfer of CVD Graphene

    Science.gov (United States)

    Clavijo, Alexis; Mao, Jinhai; Tilak, Nikhil; Altvater, Michael; Andrei, Eva

    Single layer graphene is commonly synthesized by dissociation of a carbonaceous gas at high temperatures in the presence of a metallic catalyst in a process known as Chemical Vapor Deposition or CVD. Although it is possible to achieve high quality graphene by CVD, the standard transfer technique of etching away the metallic catalyst is wasteful and jeopardizes the quality of the graphene film by contamination from etchants. Thus, development of a clean transfer technique and preservation of the parent substrate remain prominent hurdles to overcome. In this study, we employ a copper pretreatment technique and optimized parameters for growth of high quality single layer graphene at atmospheric pressure. We address the transfer challenge by utilizing the adhesive properties between a polymer film and graphene to achieve etchant-free transfer of graphene films from a copper substrate. Based on this concept we developed a technique for dry delamination and transferring of graphene to hexagonal boron nitride substrates, which produced high quality graphene films while at the same time preserving the integrity of the copper catalyst for reuse. DOE-FG02-99ER45742, Ronald E. McNair Postbaccalaureate Achievement Program.

  14. Safety and environmental aspects of CVD

    Science.gov (United States)

    Walling, Richard H.; Moss, Rodney H.

    1992-08-01

    The use of toxic materials in many CVD processes means that careful attention to safety procedures in handling and using these materials is essential. This paper addresses the safety aspects of the CVD process as a whole and then discusses two particular areas in more detail. The possibility of using less hazardous materials in processes is considered and illustrated by recent developments in MOCVD. Techniques for scrubbing waste gases from CVD effluent is also reviewed and some of the key issues discussed.

  15. Only incident depressive episodes after myocardial infarction are associated with new cardiovascular events

    NARCIS (Netherlands)

    de Jonge, Peter; van den Brink, Rob H. S.; Spijkerman, Titia A.; Ormel, Johan

    2006-01-01

    OBJECTIVES The purpose of this research was to study whether incident and non-incident depression after myocardial infarction (MI) are differentially associated with prospective fatal and non-fatal cardiovascular events. BACKGROUND Post-MI depression is defined as the presence of depression after

  16. CVD diamond windows for infrared synchrotron applications

    International Nuclear Information System (INIS)

    Sussmann, R.S.; Pickles, C.S.J.; Brandon, J.R.; Wort, C.J.H.; Coe, S.E.; Wasenczuk, A.; Dodge, C.N.; Beale, A.C.; Krehan, A.J.; Dore, P.; Nucara, A.; Calvani, P.

    1998-01-01

    This paper describes the attributes that make diamond a unique material for infrared synchrotron beam experiments. New developments in diamond synthesised by Chemical Vapour Deposition (CVD) promise to extend the range of applications which have been hitherto limited by the availability and cost of large-size single-crystal diamond. Polycrystalline CVD diamond components such as large (100 mm) diameter windows with extremely good transparency over a wide spectral range are now commercially available. Properties of CVD diamond of relevance to optical applications, such as mechanical strength, thermal conductivity and absolute bulk absorption, are discussed. It is shown that although some of the properties of CVD diamond (similar to other polycrystalline industrial ceramics) are affected by the grain structure, currently produced CVD diamond optical components have the quality and performance required for numerous demanding applications

  17. Cardiovascular disease incidence and survival

    DEFF Research Database (Denmark)

    Byberg, Stine; Agyemang, Charles; Zwisler, Ann-Dorthe

    2016-01-01

    Studies on cardiovascular disease (CVD) incidence and survival show varying results between different ethnic groups. Our aim was to add a new dimension by exploring the role of migrant status in combination with ethnic background on incidence of-and survival from-CVD and more specifically acute...... of some types of cardiovascular disease compared to Danish-born. Family-reunified migrants on the other hand had lower rates of CVD. All migrants had better survival than Danish-born indicating that migrants may not always be disadvantaged in health....

  18. Impact of on-site cardiac catheterization on resource utilization and fatal and non-fatal outcomes after acute myocardial infarction

    Directory of Open Access Journals (Sweden)

    Richard Hugues

    2006-11-01

    Full Text Available Abstract Background Patterns of care for acute myocardial infarction (AMI strongly depend on the availability of on-site cardiac catheterization facilities. Although the management found at hospitals without on-site catheterization does not lead to increased mortality, little it known about its impact on resource utilization and non-fatal outcomes. Methods We identified all patients (n = 35,289 admitted with a first AMI in the province of Quebec between January 1, 1996 and March 31, 1999 using population-based administrative databases. Medical resource utilization and non-fatal and fatal outcomes were compared among patients admitted to hospitals with and without on-site cardiac catheterization facilities. Results Cardiac catheterization and PCI were more frequently performed among patients admitted to hospitals with catheterization facilities. However, non-invasive procedures were not used more frequently at hospitals without catheterization facilities. To the contrary, echocardiography [odds ratio (OR, 2.04; 95% confidence interval (CI, 1.93–2.16] and multi-gated acquisition imaging (OR, 1.24; 95% CI, 1.17–1.32 were used more frequently at hospitals with catheterization, and exercise treadmill testing (OR, 1.02; 95% CI, 0.91–1.15 and Sestamibi/Thallium imaging (OR, 0.93; 95% CI, 0.88–0.98 were used similarly at hospitals with and without catheterization. Use of anti-ischemic medications and frequency of emergency room and physician visits, were similar at both types of institutions. Readmission rates for AMI-related cardiac complications and mortality were also similar [adjusted hazard ratio, recurrent AMI: 1.02, 95% CI, 0.89–1.16; congestive heart failure: 1.02; 95% CI, 0.90–1.15; unstable angina: 0.93; 95% CI, 0.85–1.02; mortality: 0.99; 95% CI, 0.93–1.05]. Conclusion Although on-site availability of cardiac catheterization facilities is associated with greater use of invasive cardiac procedures, non-availability of

  19. Economic growth and the incidence of occupational injuries in Austria.

    Science.gov (United States)

    Barth, Alfred; Winker, Robert; Ponocny-Seliger, Elisabeth; Sögner, Leopold

    2007-01-01

    The aim of this paper was to analyze the impact of economic growth measured by real gross domestic product (GDP) on the incidence of occupational injuries in Austria. The relationship between GDP and the occupational injury rate of the wage-earning population between 1955 and 2004 was analyzed using an error correction model. The sample size increased from 1.568,371 persons in 1955 to 2.656,952 in 2004. Occupational injuries were divided into fatal and non-fatal injuries. Occupational injuries (fatal and non-fatal) decreased from 8.59% to 4.08%: non-fatal injuries decreased from 8.56% to 4.07%; fatal injuries decreased from 0.03% to 0.01%. Austrian GDP increased from EUR 37.7 billion to EUR 202.8 billion (base year 1995). Statistical analysis clearly shows that a growing economy is associated with declining injury rates (fatal and non-fatal). Two mechanisms are discussed. Firstly, rising GDP is accompanied by greater investment in safer technologies and occupational safety measures. Secondly, booming economies are associated with a reduced risk of unemployment, which is already known to be a risk factor for occupational injuries. Economic development appears to have an impact on the incidence of occupational injuries in Austria. Health policy should emphasize the necessity for safety at work particularly in phases of economic slowdown.

  20. The Mediterranean diet in relation to mortality and CVD

    DEFF Research Database (Denmark)

    Tognon, G.; Lissner, L.; Saebye, D.

    2014-01-01

    trends and determinants of Cardiovascular disease) population study, whose diet was assessed by means of a validated 7d food record. The adherence to a Mediterranean dietary pattern was calculated by three different scores: one based on a classification excluding ingredients from mixed dishes and recipes...... (score 1); another based on a classification including ingredients (score 2); the last one based on a variant of the latter including wine instead of alcohol intake (score 3). The association between these scores and, respectively, total mortality, cardiovascular incidence and mortality was tested...... related to potential CVD pathways, such as blood lipids, blood pressure and weight change after 11 years of follow-up. In a Danish cohort, the MDS was inversely associated with total mortality and with cardiovascular and MI incidence and mortality, but not with stroke incidence or mortality....

  1. Use of the Trauma Embolic Scoring System (TESS) to predict symptomatic deep vein thrombosis and fatal and non-fatal pulmonary embolism in severely injured patients.

    Science.gov (United States)

    Ho, K M; Rao, S; Rittenhouse, K J; Rogers, F B

    2014-11-01

    Fatal pulmonary embolism is the third most common cause of death after major trauma. We hypothesised that the Trauma Embolic Scoring System (TESS) would have adequate calibration and discrimination in a group of severely injured trauma patients in predicting venous thromboembolism (VTE), and could be used to predict fatal and non-fatal symptomatic pulmonary embolism. Calibration and discrimination of the TESS were assessed by the slope and intercept of the calibration curve and the area under the receiver operating characteristic curve, respectively. Of the 357 patients included in the study, 74 patients (21%) developed symptomatic VTE after a median period of 14 days following injury. The TESS predicted risks of VTE were higher among patients who developed VTE than those who did not (14 versus 9%, P=0.001) and had a moderate ability to discriminate between patients who developed VTE and those who did not (area under the receiver operating characteristic curve 0.71, 95% confidence interval 0.65 to 0.77). The slope and intercept of the calibration curve were 2.76 and 0.34, respectively, suggesting that the predicted risks of VTE were not sufficiently extreme and overall, underestimated the observed risks of VTE. Using 5% predicted risk of VTE as an arbitrary cut-point, TESS had a high sensitivity and negative predictive value (both ≥0.97) in excluding fatal and non-fatal pulmonary embolism. The TESS had a reasonable ability to discriminate between patients who developed VTE and those who did not and may be useful to select different strategies to prevent VTE in severely injured patients.

  2. Epidemiology of non-fatal injuries among Egyptian children: a community-based cross-sectional survey.

    Science.gov (United States)

    Halawa, Eman Fawzy; Barakat, Abeer; Rizk, Hoda Ibrahim Ibrahim; Moawad, Eman Mohamed Ibraheim

    2015-12-17

    Injuries are a major cause of childhood morbidity and mortality worldwide. We aimed to determine the magnitude and characteristics of child injuries in Egypt and to identify the associated risk factors. A community-based, cross-sectional survey was conducted over 27 Egyptian governorates from June to October, 2011. The target population was 1977 households with children aged 0-18 years who had experienced accidental injuries. In the 6-month period before the investigation, 1576 injuries were reported in 1472 children from a sample population of 1399 households (response rate 70.8 %). Falls (25 %) and burn injuries (20.3 %) were the most common accidental injuries. The incidence of these injuries was significantly higher among boys (57.2 %) than girls and in children aged 2-6 years (70 %) compared with older and younger children. The five main causes of injuries were wounds (30.6 %), fractures (28.7 %), burns (20.3 %), swallowing a foreign body (8.4 %) and accidentally ingesting a poison (7.8 %). Injuries from drowning (n = 27), animal bites (n = 22) and sunstroke (n = 20) mostly occurred in rural children, accounting for 65 %, 54.4 % and 52 %, respectively, of all injuries in rural children. Home and its immediate surroundings (64.4 %) was the most common setting for injuries. Maternal age, education and working status were also associated with childhood injuries (p Children of second and third birth order were at higher risk for injuries (p injuries account for a substantial healthcare burden in Egypt. Our findings emphasise the importance of developing national preventive programs designed to reduce the incidence of childhood injuries.

  3. Acidentes de trabalho não fatais: diferenças de gênero e tipo de contrato de trabalho Non-fatal occupational injuries: gender and job contract differences

    Directory of Open Access Journals (Sweden)

    Vilma Santana

    2003-04-01

    Full Text Available No Brasil, trabalhadores sem vínculo formal de trabalho representam mais da metade da força de trabalho, cuja maioria é composta por mulheres. Neste estudo, estima-se a incidência anual de acidentes ocupacionais não fatais, e a sua distribuição por gênero e tipo de contrato de trabalho, em uma área urbana do Brasil. Dados provêm de um inquérito de base comunitária conduzido com uma amostra aleatória dos habitantes de Salvador, capital do Estado da Bahia. A população deste estudo compreende o total de pessoas entre 18 e 65 anos que referiram trabalho remunerado (n = 2.947. A coleta de dados baseada em entrevistas domiciliares individuais. A incidência anual de acidentes foi estimada em 5,80%, discretamente maior entre os homens (6,05% do que entre as mulheres (5,53%, ou entre trabalhadores sem contrato formal de trabalho (5,92% do que no grupo de comparação (5,67%, diferenças não estatisticamente significantes. A semelhança entre as freqüências de acidentes de trabalho entre mulheres e homens independentemente do tipo de contrato de trabalho apontam para a necessidade de maior atenção a estes eventos no sexo feminino, e entre os trabalhadores informais, amplamente ignorados nas estatísticas oficiais do país.In Brazil, workers without a formal job contract comprise more than half of the labor force, a contingent formed mainly by women. This study presents estimates of the annual incidence of non-fatal work-related injuries and their distribution by gender and type of job contract in an urban area of Brazil. This was a community-based study with a random cluster area sample of the inhabitants from the city of Salvador, capital of the State of Bahia. The study population included all individuals from 18 to 65 years of age who reported having a paid job (n = 2,947. Data were obtained through individual household interviews. The overall estimated annual incidence rate was 5.80%, with a non-statistically significant

  4. CVD diamond for nuclear detection applications

    CERN Document Server

    Bergonzo, P; Tromson, D; Mer, C; Guizard, B; Marshall, R D; Foulon, F

    2002-01-01

    Chemically vapour deposited (CVD) diamond is a remarkable material for the fabrication of radiation detectors. In fact, there exist several applications where other standard semiconductor detectors do not fulfil the specific requirements imposed by corrosive, hot and/or high radiation dose environments. The improvement of the electronic properties of CVD diamond has been under intensive investigations and led to the development of a few applications that are addressing specific industrial needs. Here, we report on CVD diamond-based detector developments and we describe how this material, even though of a polycrystalline nature, is readily of great interest for applications in the nuclear industry as well as for physics experiments. Improvements in the material synthesis as well as on device fabrication especially concern the synthesis of films that do not exhibit space charge build up effects which are often encountered in CVD diamond materials and that are highly detrimental for detection devices. On a pre-i...

  5. Surface coatings deposited by CVD and PVD

    International Nuclear Information System (INIS)

    Gabriel, H.M.

    1982-01-01

    The demand for wear and corrosion protective coatings is increasing due to economic facts. Deposition processes in gas atmospheres like the CVD and PVD processes attained a tremendous importance especially in the field of the deposition of thin hard refractory and ceramic coatings. CVD and PVD processes are reviewed in detail. Some examples of coating installations are shown and numerous applications are given to demonstrate the present state of the art. (orig.) [de

  6. CVD diamond for nuclear detection applications

    International Nuclear Information System (INIS)

    Bergonzo, P.; Brambilla, A.; Tromson, D.; Mer, C.; Guizard, B.; Marshall, R.D.; Foulon, F.

    2002-01-01

    Chemically vapour deposited (CVD) diamond is a remarkable material for the fabrication of radiation detectors. In fact, there exist several applications where other standard semiconductor detectors do not fulfil the specific requirements imposed by corrosive, hot and/or high radiation dose environments. The improvement of the electronic properties of CVD diamond has been under intensive investigations and led to the development of a few applications that are addressing specific industrial needs. Here, we report on CVD diamond-based detector developments and we describe how this material, even though of a polycrystalline nature, is readily of great interest for applications in the nuclear industry as well as for physics experiments. Improvements in the material synthesis as well as on device fabrication especially concern the synthesis of films that do not exhibit space charge build up effects which are often encountered in CVD diamond materials and that are highly detrimental for detection devices. On a pre-industrial basis, CVD diamond detectors have been fabricated for nuclear industry applications in hostile environments. Such devices can operate in harsh environments and overcome limitations encountered with the standard semiconductor materials. Of these, this paper presents devices for the monitoring of the alpha activity in corrosive nuclear waste solutions, such as those encountered in nuclear fuel assembly reprocessing facilities, as well as diamond-based thermal neutron detectors exhibiting a high neutron to gamma selectivity. All these demonstrate the effectiveness of a demanding industrial need that relies on the remarkable resilience of CVD diamond

  7. Fermented dairy food and CVD risk.

    Science.gov (United States)

    Tapsell, Linda C

    2015-04-01

    Fermented dairy foods such as yoghurt and cheese are commonly found in the Mediterranean diet. Recent landmark research has confirmed the effect of the Mediterranean diet on reducing the CVD risk, but the relative contributions of fermented dairy foods have not been fully articulated. The present study provides a review of the relationship between fermented dairy foods consumption and CVD risk in the context of the whole diet. Studies show that people who eat healthier diets may be more likely to consume yoghurt, so there is a challenge in attributing separate effects to yoghurt. Analyses from large population studies list yoghurt as the food most negatively associated with the risk of weight gain (a problem that may lead to CVD). There is some suggestion that fermented dairy foods consumption (yoghurt or cheese) may be associated with reduced inflammatory biomarkers associated with the development of CVD. Dietary trials suggest that cheese may not have the same effect on raising LDL-cholesterol levels as butter with the same saturated fat content. The same might be stated for yoghurt. The use of different probiotic cultures and other aspects of study design remain a problem for research. Nevertheless, population studies from a range of countries have shown that a reduced risk of CVD occurs with the consumption of fermented dairy foods. A combination of evidence is necessary, and more research is always valuable, but indications remain that fermented dairy foods such as cheese and yoghurt are integral to diets that are protective against CVD.

  8. Trends in incidence, case-fatality and recurrence of myocardial infarction in the Danish MONICA population 1982-1991

    DEFF Research Database (Denmark)

    Davidsen, M; Brønnum-Hansen, H; Jørgensen, Torben

    2001-01-01

    BACKGROUND: Growing awareness of risk factors for myocardial infarction (MI), continuous mass campaigns on lifestyle factors, increasing use of heart rehabilitation and improved treatment should imply decreases in the incidence, case-fatality and recurrence rates of MI. The purpose of the study......, Denmark. Fatal and non-fatal attacks classified as definite MI and non-fatal attacks classified as possible MI were included. The incidence rate was analysed by Poisson regression, the case-fatality rate by logistic regression, and the rate of recurrence by Cox regression. Age-period-cohort analyses were...

  9. Recent Results from Beam Tests of 3D and Pad pCVD Diamond Detectors

    CERN Document Server

    Wallny, Rainer

    2017-01-01

    Results from prototypes of a detector using chemical vapor deposited (CVD) diamond with embedded resistive electrodes in the bulk forming a 3D diamond device are presented. A detector system consisting of 3D devices based on poly-crystalline CVD (pCVD) diamond was connected to a multi-channel readout and successfully tested in a 120 GeV/c proton beam at CERN proving for the first time the feasibility of the 3D detector concept in pCVD for particle tracking applications. We also present beam test results on the dependence of signal size on incident particle rate in charged particle detectors based on poly-crystalline CVD diamond. The detectors were tested in a 260 MeV/c pion beam over a range of particle fluxes from 2 kHz/cm2 to 10 MHz/cm2 . The pulse height of the sensors was measured with pad readout electronics at a peaking time of 7 ns. Our data from the 2015 beam tests at PSI indicate that the pulse height of poly-crystalline CVD diamond sensor irradiated to 5×1014 neq/cm2 is independent of particle flux...

  10. Local Residential Segregation Matters: Stronger Association of Census Tract Compared to Conventional City-Level Measures with Fatal and Non-Fatal Assaults (Total and Firearm Related), Using the Index of Concentration at the Extremes (ICE) for Racial, Economic, and Racialized Economic Segregation, Massachusetts (US), 1995-2010.

    Science.gov (United States)

    Krieger, Nancy; Feldman, Justin M; Waterman, Pamela D; Chen, Jarvis T; Coull, Brent A; Hemenway, David

    2017-04-01

    Research on residential segregation and health, primarily conducted in the USA, has chiefly employed city or regional measures of racial segregation. To test our hypothesis that stronger associations would be observed using local measures, especially for racialized economic segregation, we analyzed risk of fatal and non-fatal assault in Massachusetts (1995-2010), since this outcome is strongly associated with residential segregation. The segregation metrics comprised the Index of Concentration at the Extremes (ICE), the Index of Dissimilarity, and poverty rate, with measures computed at both the census tract and city/town level. Key results were that larger associations between fatal and non-fatal assaults and residential segregation occurred for models using the census tract vs. city/town measures, with the greatest associations observed for racialized economic segregation. For fatal assaults, comparing the bottom vs. top quintiles, the incidence rate ratio (and 95% confidence interval (CI)) in models using the census tract measures equaled 3.96 (95% CI 3.10, 5.06) for the ICE for racialized economic segregation, 3.26 (95% CI 2.58, 4.14) for the ICE for income, 3.14 (95% CI 2.47, 3.99) for poverty, 2.90 (95% CI 2.21, 3.81) for the ICE for race/ethnicity, and only 0.93 (95% CI 0.79, 1.11) for the Index of Dissimilarity; in models that included both census tract and city/town ICE measures, this risk ratio for the ICE for racialized economic segregation was higher at the census tract (3.29; 95% CI 2.43, 4.46) vs. city/town level (1.61; 95% CI 1.12, 2.32). These results suggest that, at least in the case of fatal and non-fatal assaults, research on residential segregation should employ local measures, including of racialized economic segregation, to avoid underestimating the adverse impact of segregation on health.

  11. CVD mechanism of pyrolytic boron nitride

    International Nuclear Information System (INIS)

    Tanji, H.; Monden, K.; Ide, M.

    1987-01-01

    Pyrolytic boron nitride (P-BN) has become a essential material for III-V compound semiconductor manufacturing process. As the demand from electronics industry for larger single crystals increases, the demand for larger and more economical P-BN components is growing rapidly. P-BN is manufactured by low pressure CVD using boron-trihalides and ammonia as the reactants. In spite that P-BN has been in the market for quite a long time, limited number of fundamental studies regarding the kinetics and the formation mechanism of P-BN have been reported. As it has been demonstrated in CVD of Si, knowledge and both theoretical and empirical modeling of CVD process can be applied to improve the deposition technology and to give more uniform deposition with higher efficiency, and it should also apply to the deposition of P-BN

  12. The Charge Collection Properties of CVD Diamond

    CERN Document Server

    Behnke, T; Oh, A; Steuerer, J; Wagner, A; Zeuner, W; Behnke, Ties; Hüntemeyer, Petra; Oh, Alexander; Steuerer, Johannes; Wagner, Albrecht; Zeuner, Wolfram

    1998-01-01

    The charge collection properties of CVD diamond have been investigated with ionising radiation. In this study two CVD diamond samples, prepared with electrical contacts have been used as solid state ionisation chambers. The diamonds have been studied with beta particles and 10 keV photons, providing a homogeneous ionisation density and with protons and alpha particles which are absorbed in a thin surface layer. For the latter case a strong decrease of the signal as function of time is observed, which is attributed to polarisation effects inside the diamond. Spatially resolved measurements with protons show a large variation of the charge collection efficiency, whereas for photons and minimum ionising particles the response is much more uniform and in the order of 18%. These results indicate that the applicability of CVD diamond as a position sensitive particle detector depends on the ionisation type and appears to be promising for homogeneous ionisation densities as provided by relativistic charged particles.

  13. A validated method for quantifying atractyloside and carboxyatractyloside in blood by HPLC-HRMS/MS, a non-fatal case of intoxication with Atractylis gummifera L.

    Science.gov (United States)

    Carlier, Jérémy; Romeuf, Ludovic; Guitton, Jérôme; Priez-Barallon, Cédric; Bévalot, Fabien; Fanton, Laurent; Gaillard, Yvan

    2014-01-01

    Atractyloside (ATR) and carboxyatractyloside (CATR) are diterpene glycosides that are responsible for the toxicity of several Asteraceae plants around the world. Mediterranean gum thistle (Atractylis gummifera L.) and Zulu impila (Callilepis laureola DC.), in particular, are notoriously poisonous and the cause of many accidental deaths, some suicides and even some murders. There is no current method for measuring the two toxins in biological samples that meet the criteria of specificity required in forensic medicine. We have endeavored to fill this analytical gap. Analysis was carried out using a solid-phase extraction and a high-performance liquid chromatography coupled with high-resolution tandem mass spectrometry detection. The method was validated in the whole blood with quantification limits of 0.17 and 0.15 µg/L for ATR and CATR, respectively. The method was applied to a non-fatal case of intoxication with A. gummifera. To the best of the authors' knowledge, this is the first time that a concentration of ATR and CATR in blood (883.1 and 119.0 µg/L, respectively) and urine (230.4 and 140.3 µg/L, respectively) is reported. ATR and CATR were quantified in A. gummifera roots by the standard method addition (3.7 and 5.4 mg/g, respectively). © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  14. The Economic Cost of Suicide and Non-Fatal Suicide Behavior in the Australian Workforce and the Potential Impact of a Workplace Suicide Prevention Strategy.

    Science.gov (United States)

    Kinchin, Irina; Doran, Christopher M

    2017-03-27

    Suicide and non-fatal suicide behavior (NFSB) are significant problems faced by most countries. The objective of this research is to quantify the economic cost of suicide and NFSB in the Australian workforce and to examine the potential impact of introducing a workplace suicide prevention intervention to reduce this burden. The analysis used the best available suicide data, a well-established costing methodology, and a proven workplace intervention. In 2014, 903 workers died by suicide, 2303 workers harmed themselves resulting in full incapacity, and 11,242 workers harmed themselves resulting in a short absence from work. The present value of the economic cost of suicide and NFSB is estimated at $6.73 billion. Our analysis suggests the economic benefit of implementing a universal workplace strategy would considerably outweigh the cost of the strategy. For every one dollar invested, the benefits would be in excess of $1.50 ($1.11-$3.07), representing a positive economic investment. All variations of the key parameter hold the positive benefit-cost ratio. Rates of suicide and NFSB are far too high in Australia and elsewhere. More needs to be done to reduce this burden. Although workplace strategies are appropriate for those employed, these interventions must be used within a multifaceted approach that reflects the complex nature of self-harming behavior.

  15. Safe and unsafe spaces: Non-fatal overdose, arrest, and receptive syringe sharing among people who inject drugs in public and semi-public spaces in Baltimore City.

    Science.gov (United States)

    Hunter, Kyle; Park, Ju Nyeong; Allen, Sean T; Chaulk, Patrick; Frost, Taeko; Weir, Brian W; Sherman, Susan G

    2018-04-13

    The spaces in which drug use occurs constitutes a key aspect of the "risk environment" of people who inject drugs (PWID). We aimed to add nuance to the characterization of "safe" and "unsafe" spaces in PWID's environments to further understand how these spaces amplify the risk of morbidities associated with injection drug use. PWID were recruited through the Baltimore City syringe service program and through peer referral. Participants completed a socio-behavioral survey. Multivariable logistic regression was used to identify associations between utilization of public, semi-public and private spaces with arrest, non-fatal overdose, and receptive syringe sharing. The sample of PWID (N = 283) was mostly 45 years and older (54%), male (69%), Black (55%), and heroin users (96%). Compared to PWID who primarily used private settings, the adjusted odds of recent overdose were greater among PWID who mostly used semi-public and public locations to inject drugs. We also found independent associations between arrest and semi-public spaces, and between receptive syringe sharing and public spaces (all p spaces where PWID can reduce their risk of overdose, likelihood of arrest and blood-borne diseases, and the dual potential of the environment in promoting health and risk. Copyright © 2018 Elsevier B.V. All rights reserved.

  16. [Risk of fatal/non-fatal events in patients with previous coronary heart disease/acute myocardial infarction and treatment with non-steroidal anti-inflammatory drugs].

    Science.gov (United States)

    Muñoz Olmo, L; Juan Armas, J; Gomariz García, J J

    2017-09-04

    Primary Care is the fundamental axis of our health system and obliges us to be consistent with our prescriptions. The non-steroidal anti-inflammatory drugs (NSAIDs) have been associated with increased cardiovascular risk and increased risk of all causes of death, as well as acute myocardial infarction (AMI) in patients with a previous myocardial infarction. Pain and cardiac patient management are 2 basic pillars in our daily activity, and we must know the limitations of NSAIDs in patients with established cardiovascular risk. We present a review of the scientific literature with primary interest in the role of NSAIDs and cardiovascular risk. The objective is to determine the relationship between the consumption of different NSAIDs and the fatal and non-fatal events among patients with known coronary disease. This is a review of the scientific literature with primary interest in the role of NSAIDs and cardiovascular risk. The literature review was conducted in PubMed search engines like Tripdatabase and with certain keywords. Of the 15 original papers found, 9 did not correspond completely to the central focus, so the approach was decided from 6 original articles from the past 5 years, which address the central focus of increased cardiovascular risk found (fatal and non-fatal events) in patients with prior cardiovascular disease or AMI being prescribed NSAIDs for any reason. The risk of fatal/non-fatal events in each of the studies is expressed by the odds ratio (OR)/hazard ratio (HR), defined as the probability of an event occurring. A moderate risk was observed for ibuprofen. It increases the risk of acute coronary syndrome after 5 years of cardiovascular event, especially in the 2nd year (OR 1.63; 95% CI 1.42-1.87). It also increases the risk of stroke (HR 1.23; 95% IC 1.10-1.38). Cyclo-oxygenase-2 inhibitors were the third risk group, after nabumetone and diclofenac. Celecoxib increases risk from the 14th day of treatment (HR 2.3; 95% CI 1.79-3.02), having an OR

  17. The role of healthcare delivery in the outcome of meningococcal disease in children: case-control study of fatal and non-fatal cases.

    Science.gov (United States)

    Ninis, Nelly; Phillips, Claire; Bailey, Linda; Pollock, Jon I; Nadel, Simon; Britto, Joseph; Maconochie, Ian; Winrow, Andrew; Coen, Pietro G; Booy, Robert; Levin, Michael

    2005-06-25

    To determine whether suboptimal management in hospital could contribute to poor outcome in children admitted with meningococcal disease. Case-control study of childhood deaths from meningococcal disease, comparing hospital care in fatal and non-fatal cases. National statistics and hospital records. All children under 17 years who died from meningococcal disease (cases) matched by age with three survivors (controls) from the same region of the country. Predefined criteria defined optimal management. A panel of paediatricians blinded to the outcome assessed case records using a standardised form and scored patients for suboptimal management. We identified 143 cases and 355 controls. Departures from optimal (per protocol) management occurred more frequently in the fatal cases than in the survivors. Multivariate analysis identified three factors independently associated with an increased risk of death: failure to be looked after by a paediatrician, failure of sufficient supervision of junior staff, and failure of staff to administer adequate inotropes. Failure to recognise complications of the disease was a significant risk factor for death, although not independently of absence of paediatric care (P = 0.002). The odds ratio for death was 8.7 (95% confidence interval 2.3 to 33) with two failures, increasing with multiple failures. Suboptimal healthcare delivery significantly reduces the likelihood of survival in children with meningococcal disease. Improved training of medical and nursing staff, adherence to published protocols, and increased supervision by consultants may improve the outcome for these children and also those with other life threatening illnesses.

  18. A step-by-step diagnosis of exclusion in a twin pregnancy with acute respiratory failure due to non-fatal amniotic fluid embolism: a case report

    Directory of Open Access Journals (Sweden)

    Papaioannou Vasilios E

    2008-05-01

    Full Text Available Abstract Introduction Respiratory failure may develop during the later stages of pregnancy and is usually associated with tocolysis or other co-existing conditions such as pneumonia, sepsis, pre-eclampsia or amniotic fluid embolism syndrome. Case presentation We present the case of a 34-year-old healthy woman with a twin pregnancy at 31 weeks and 6 days who experienced acute respiratory failure, a few hours after administration of tocolysis (ritodrine, due to preterm premature rupture of the membranes. Her chest discomfort was significantly ameliorated after the ritodrine infusion was stopped and a Cesarean section was performed 48 hours later under spinal anesthesia; however, 2 hours after surgery she developed severe hypoxemia, hypotension, fever and mild coagulopathy. The patient was intubated and transferred to the intensive care unit where she made a quick and uneventful recovery within 3 days. As there was no evidence for drug- or infection-related thromboembolic or myocardial causes of respiratory failure, we conclude that our patient experienced a rare type of non-fatal amniotic fluid embolism. Conclusion In spite of the lack of solid scientific support for our diagnosis, we conclude that our patient suffered an uncommon type of amniotic fluid embolism syndrome and we believe that this report highlights the need for extreme vigilance and a high index of suspicion for such a diagnosis in any pregnant individual.

  19. Life span history of non-fatal suicidal behaviours in a large sample of general practitioners' patients: data from Rovigo, Northern Italy.

    Science.gov (United States)

    Zanone Poma, S; Vicentini, S; Siviero, F; Grossi, A; Toniolo, E; Cocchio, S; Baldo, V; De Leo, Diego

    2014-11-01

    A survey about history of non-fatal suicidal behaviour was performed on 1,171 subjects in the waiting room of general practitioners' practices in the territory of Rovigo (Northern Italy). The mean age of interviewed subjects was 52.9 ± 17.0, with a majority of female individuals. Two and two percent admitted previous experience of non-suicidal self-injury, 4.7 % admitted having had serious suicidal thoughts/plans, and 1.8 % reported at least one suicide attempt. Compared to the rest of the sample, people with history of suicidal behaviours resulted to be of younger age (p < .05), whilst their level of well-being was poorer (p < .001). When compared to the results of the Italian arm of the European Study of the Epidemiology of Mental Disorders, carried out on general population samples, the present study produces higher rates of suicidality, despite the much higher mean age of the interviewed subjects compared to the general population.

  20. Low temperature CVD deposition of silicon carbide

    International Nuclear Information System (INIS)

    Dariel, M.; Yeheskel, J.; Agam, S.; Edelstein, D.; Lebovits, O.; Ron, Y.

    1991-04-01

    The coating of graphite on silicon carbide from the gaseous phase in a hot-well, open flow reactor at 1150degC is described. This study constitutes the first part of an investigation of the process for the coating of nuclear fuel by chemical vapor deposition (CVD)

  1. Risk of non-fatal suicide ideation and behaviour in recent onset schizophrenia--the influence of clinical, social, self-esteem and demographic factors.

    Science.gov (United States)

    Tarrier, Nicholas; Barrowclough, Christine; Andrews, Bernice; Gregg, Lynsey

    2004-11-01

    Suicide rates amongst schizophrenic patients are high. There are disadvantages in investigating successfully completed suicides which make suicidal ideation and previous attempts important proxy measures of suicidal risk. The aim of this study was to investigate factors associated with these risk measures. Fifty-nine patients suffering recent onset schizophrenia were assessed for suicidal ideation and history, and a range of demographic, clinical, social (including relatives' Expressed Emotion) and self-esteem measures. Univariate comparisons were made between those with and without suicide ideation and previous attempts. Path analysis was conducted to identify factors directly or indirectly associated with a composite scale of risk (low, medium or high). Approximately 25% of the sample reported a current desire to kill themselves and 47% had made one or more previous attempts. There were numerous significant univariate differences between those with or without ideation or history. Path analysis indicated that greater hopelessness (OR 1.22) and longer duration of illness (OR 1.13) increased risk. Hopelessness was associated with higher negative self-evaluation and social isolation. Negative self-evaluation was associated with more relatives' criticism which was associated with more negative symptoms. Being a male, unmarried and unemployed were all significantly associated with an increase in negative symptoms. Social isolation was associated with being unemployed, older, more positive symptoms and longer illness duration. Duration of illness was not itself predicted by any other variables. Non-fatal suicide ideation and behaviour are significantly associated with an array of demographic, clinical, interpersonal and psychological factors. To reduce risk of suicide, these factors need to be assessed and methods developed to reduce their influence.

  2. Chemical Vapor-Deposited (CVD) Diamond Films for Electronic Applications

    Science.gov (United States)

    1995-01-01

    Diamond films have a variety of useful applications as electron emitters in devices such as magnetrons, electron multipliers, displays, and sensors. Secondary electron emission is the effect in which electrons are emitted from the near surface of a material because of energetic incident electrons. The total secondary yield coefficient, which is the ratio of the number of secondary electrons to the number of incident electrons, generally ranges from 2 to 4 for most materials used in such applications. It was discovered recently at the NASA Lewis Research Center that chemical vapor-deposited (CVD) diamond films have very high secondary electron yields, particularly when they are coated with thin layers of CsI. For CsI-coated diamond films, the total secondary yield coefficient can exceed 60. In addition, diamond films exhibit field emission at fields orders of magnitude lower than for existing state-of-the-art emitters. Present state-of-the-art microfabricated field emitters generally require applied fields above 5x10^7 V/cm. Research on field emission from CVD diamond and high-pressure, high-temperature diamond has shown that field emission can be obtained at fields as low as 2x10^4 V/cm. It has also been shown that thin layers of metals, such as gold, and of alkali halides, such as CsI, can significantly increase field emission and stability. Emitters with nanometer-scale lithography will be able to obtain high-current densities with voltages on the order of only 10 to 15 V.

  3. Lipids, atherosclerosis and CVD risk: is CRP an innocent bystander?

    DEFF Research Database (Denmark)

    Nordestgaard, B G; Zacho, J

    2009-01-01

    exclude that genetically elevated CRP cause CVD. CONCLUSION: These data suggest that elevated CRP per se does not cause CVD; however, inflammation per se possibly contributes to CVD. Elevated CRP levels more likely is a marker for the extent of atherosclerosis or for the inflammatory activity...

  4. Undoped CVD diamond films for electrochemical applications

    International Nuclear Information System (INIS)

    Mosinska, Lidia; Fabisiak, Kazimierz; Paprocki, Kazimierz; Kowalska, Magdalena; Popielarski, Pawel; Szybowicz, Miroslaw

    2013-01-01

    By using different deposition conditions, the CVD diamond films with different qualities and orientation were grown by the hot-filament CVD technique. The object of this article is to summarize and discuss relation between structural, physical and electrochemical properties of different diamond electrodes. The physical properties of the Hot Filament CVD microcrystalline diamond films are analyzed by scanning electron microscopy and Raman spectroscopy. In presented studies two different electrodes were used of the diamond grain sizes around 200 nm and 10 μm, as it was estimated from SEM picture. The diamond layers quality was checked on basis of FWHM (Full width at Half Maximum) of 1332 cm −1 diamond Raman peak. The ratio of sp 3 /sp 2 carbon bonds was determined by 1550 cm −1 G band and 1350 cm −1 D band in the Raman spectrum. The electrochemical properties were analyzed using (CV) cyclic voltammetry measurements in aqueous solutions. The sensitivity of undoped diamond electrodes depends strongly on diamond film quality and concentration of amorphous carbon phase in the diamond layer

  5. Ballistic Josephson junctions based on CVD graphene

    Science.gov (United States)

    Li, Tianyi; Gallop, John; Hao, Ling; Romans, Edward

    2018-04-01

    Josephson junctions with graphene as the weak link between superconductors have been intensely studied in recent years, with respect to both fundamental physics and potential applications. However, most of the previous work was based on mechanically exfoliated graphene, which is not compatible with wafer-scale production. To overcome this limitation, we have used graphene grown by chemical vapour deposition (CVD) as the weak link of Josephson junctions. We demonstrate that very short, wide CVD-graphene-based Josephson junctions with Nb electrodes can work without any undesirable hysteresis in their electrical characteristics from 1.5 K down to a base temperature of 320 mK, and their gate-tuneable critical current shows an ideal Fraunhofer-like interference pattern in a perpendicular magnetic field. Furthermore, for our shortest junctions (50 nm in length), we find that the normal state resistance oscillates with the gate voltage, consistent with the junctions being in the ballistic regime, a feature not previously observed in CVD-graphene-based Josephson junctions.

  6. Spin transport studies in encapsulated CVD graphene

    Science.gov (United States)

    Avsar, Ahmet; You Tan, Jun; Ho, Yuda; Koon, Gavin; Oezyilmaz, Barbaros

    2013-03-01

    Spin transport studies in exfoliated graphene on SiO2/Si substrates have shown spin relaxation times that are orders of magnitude shorter than the theoretical predictions. Similar to the charge transport case, the underlying substrate is expected to be the limiting factor. The recent work Zomer, P. J. et al. shows that spin transport over lengths up to 20um is possible in high mobility exfoliated graphene devices on boron nitride (BN) substrates. Here we discuss our initial attempts to repeat such spin transport experiments with CVD graphene on BN substrates. The effect of encapsulation of such devices with an extra BN layer will be also discussed.

  7. An assessment of radiotherapy dosimeters based on CVD grown diamond

    International Nuclear Information System (INIS)

    Ramkumar, S.; Buttar, C.M.; Conway, J.; Whitehead, A.J.; Sussman, R.S.; Hill, G.; Walker, S.

    2001-01-01

    Diamond is potentially a very suitable material for use as a dosimeter for radiotherapy. Its radiation hardness, the near tissue equivalence and chemical inertness are some of the characteristics of diamond, which make it well suited for its application as a dosimeter. Recent advances in the synthesis of diamond by chemical vapour deposition (CVD) technology have resulted in the improvement in the quality of material and increased its suitability for radiotherapy applications. We report in this paper, the response of prototype dosimeters based on two different types (CVD1 and CVD2) of CVD diamond to X-rays. The diamond devices were assessed for sensitivity, dependence of response on dose and dose rate, and compared with a Scanditronix silicon photon diode and a PTW natural diamond dosimeter. The diamond devices of CVD1 type showed an initial increase in response with dose, which saturates after ∼6 Gy. The diamond devices of CVD2 type had a response at low fields ( 1162.8 V/cm), the CVD2-type devices showed polarisation and dose-rate dependence. The sensitivity of the CVD diamond devices varied between 82 and 1300 nC/Gy depending upon the sample type and the applied voltage. The sensitivity of CVD diamond devices was significantly higher than that of natural diamond and silicon dosimeters. The results suggest that CVD diamond devices can be fabricated for successful use in radiotherapy applications

  8. Comparative evaluation of CVD diamond technologies

    Energy Technology Data Exchange (ETDEWEB)

    Anthony, T.R. [General Electric Corporate Research & Development Center, Schenectady, NY (United States)

    1993-01-01

    Chemical vapor deposition (CVD) of diamonds occurs from hydrogen-hydrocarbon gas mixtures in the presence of atomic hydrogen at subatmospheric pressures. Most CVD methods are based on different means of generating and transporting atomic hydrogen in a particular system. Evaluation of these different techniques involves their capital costs, material costs, energy costs, labor costs and the type and quality of diamond that they produce. Currently, there is no universal agreement on which is the best technique and technique selection has been largely driven by the professional background of the user as well as the particular application of interest. This article discusses the criteria for evaluating a process for low-pressure deposition of diamond. Next, a brief history of low-pressure diamond synthesis is reviewed. Several specific processes are addressed, including the hot filament process, hot filament electron-assisted chemical vapor deposition, and plasma generation of atomic hydrogen by glow discharge, microwave discharge, low pressure radio frequency discharge, high pressure DC discharge, high pressure microwave discharge jets, high pressure RF discharge, and high and low pressure flames. Other types of diamond deposition methods are also evaluated. 101 refs., 15 figs.

  9. Alternative group V precursors for CVD applications

    Science.gov (United States)

    Lum, R. M.; Klingert, J. K.

    1991-01-01

    The chemical vapor deposition (CVD) techniques used to grow III/V semiconductors films, such as metalorganic vapor phase epitaxy (MOVPE), hydride VPE, chemical beam epitaxy (CBE) and gas source molecular beam epitaxy (GS-MBE), all use hydrides (AsH 3 and PH 3) as the Group V source. However, the hydrides are extremely toxic gases which are stored under high pressure (200-2000 psi). To reduce the safety hazards associated with these gases, alternative Group V precursors have been investigated. Organoarsenic and phosphorous compounds have received the most attention as replacements for AsH 3 and PH 3 because they are typically low vapor pressure liquids, and thus present significantly lower exposure risks than the hydrides. For AsH 3 these have included the methyl, ethyl and butyl-based derivatives RnAsH 3- n, with varying degrees ( n = 1-3) of hydrogen atom substitution. In this paper the growth properties, thermochemistry and toxicity of the various alkylarsine precursors are compared with arsine. Data are presented on the impact of the thermochemistry of these compounds on film electrical properties, and on the effects of precursor composition and purity on overall film quality. The suitability of alternative As-precursors for device applications is demonstrated, and selection criteria are presented for the most effective alkylarsine compound for a particular CVD growth process.

  10. TSC response of irradiated CVD diamond films

    CERN Document Server

    Borchi, E; Bucciolini, M; Guasti, A; Mazzocchi, S; Pirollo, S; Sciortino, S

    1999-01-01

    CVD diamond films have been irradiated with electrons, sup 6 sup 0 Co photons and protons in order to study the dose response to exposure to different particles and energies and to investigate linearity with dose. The Thermally Stimulated Current (TSC) has been studied as a function of the dose delivered to polymethilmetacrilate (PMMA) in the range from 1 to 12 Gy with 20 MeV electrons from a linear accelerator. The TSC spectrum has revealed the presence of two components with peak temperatures of about 470 and 520 K, corresponding to levels lying in the diamond band gap with activation energies of the order of 0.7 - 1 eV. After the subtraction of the exponential background the charge emitted during the heating scan has been evaluated and has been found to depend linearly on the dose. The thermally emitted charge of the CVD diamond films has also been studied using different particles. The samples have been irradiated with the same PMMA dose of about 2 Gy with 6 and 20 MeV electrons from a Linac, sup 6 sup 0 ...

  11. Mo-C Multilayered CVD Coatings

    Directory of Open Access Journals (Sweden)

    A. Sagalovych

    2013-12-01

    Full Text Available Production processes of multi-layered Mo-C coatings by the method of chemical vapor deposition (CVD with the use of organometallic compounds were developed. Coatings are applied on technical purpose steel DIN 1.2379 (H12F1 and DIN 1.7709 (25H2MF (ÉI10 heat-treated ball with the high class of surface roughness (> 10. The average deposition rate was 50 μm / h. The optimal conditions of deposition coatings for different technological schemas were defined. Metallographic investigations of the obtained coatings were carried out. Tribological studies of the friction and wear characteristics of sliding friction in conditions of boundary lubrication of Ï-S multilayered CVD coatings shows, that coatings have low friction coefficients (0075-0095 at loads up to 2.0 kN, showed high resistance to wear and are effective in increasing the stability of the pair for precision friction pairs of hydraulical units.

  12. Experiment and equipment of depositing diamond films with CVD system

    International Nuclear Information System (INIS)

    Xie Erqing; Song Chang'an

    2002-01-01

    CVD (chemical vapor deposition) emerged in recent years is a new technique for thin film deposition, which play a key role in development of modern physics. It is important to predominate the principle and technology of CVD for studying modern physics. In this paper, a suit of CVD experimental equipment for teaching in college physics is presented, which has simple design and low cost. The good result was gained in past teaching practices

  13. Application of CVD diamond film for radiation detection

    International Nuclear Information System (INIS)

    Zhou Haiyang; Zhu Xiaodong; Zhan Rujuan

    2005-01-01

    With the development of diamond synthesis at low pressure, the CVD diamond properties including electronic characteristics have improved continuously. Now the fabrication of electronic devices based on the CVD diamond has been one of hot research subjects in this field. Due to many unique advantages, such as high signal-noise ratio, fast time response, and normal output in extremely harsh surrounding, the CVD diamond radiation detector has attracted more and more interest. In this paper, we have reviewed the development and status of the CVD diamond radiation detector. The prospect of this detector is described. (authors)

  14. CVD diamond sensors for charged particle detection

    CERN Document Server

    Krammer, Manfred; Berdermann, E; Bergonzo, P; Bertuccio, G; Bogani, F; Borchi, E; Brambilla, A; Bruzzi, Mara; Colledani, C; Conway, J; D'Angelo, P; Dabrowski, W; Delpierre, P A; Dencuville, A; Dulinski, W; van Eijk, B; Fallou, A; Fizzotti, F; Foulon, F; Friedl, M; Gan, K K; Gheeraert, E; Hallewell, G D; Han, S; Hartjes, F G; Hrubec, Josef; Husson, D; Kagan, H; Kania, D R; Kaplon, J; Kass, R; Koeth, T W; Lo Giudice, A; Lü, R; MacLynne, L; Manfredotti, C; Meier, D; Mishina, M; Moroni, L; Oh, A; Pan, L S; Pernicka, Manfred; Peitz, A; Perera, L P; Pirollo, S; Procario, M; Riester, J L; Roe, S; Rousseau, L; Rudge, A; Russ, J; Sala, S; Sampietro, M; Schnetzer, S; Sciortino, S; Stelzer, H; Stone, R; Suter, B; Tapper, R J; Tesarek, R; Trischuk, W; Tromson, D; Vittone, E; Walsh, A M; Wedenig, R; Weilhammer, Peter; Wetstein, M; White, C; Zeuner, W; Zöller, M

    2001-01-01

    CVD diamond material was used to build position-sensitive detectors for single-charged particles to be employed in high-intensity physics experiments. To obtain position information, metal contacts shaped as strips or pixels are applied to the detector surface for one- or two- dimensional coordinate measurement. Strip detectors 2*4 cm/sup 2/ in size with a strip distance of 50 mu m were tested. Pixel detectors of various pixel sizes were bump bonded to electronics chips and investigated. A key issue for the use of these sensors in high intensity experiments is the radiation hardness. Several irradiation experiments were carried out with pions, protons and neutrons exceeding a fluence of 10/sup 15/ particles/cm/sup 2/. The paper presents an overview of the results obtained with strip and pixel detectors in high-energy test beams and summarises the irradiation studies. (8 refs).

  15. Cold Vacuum Drying (CVD) Set Point Determination

    Energy Technology Data Exchange (ETDEWEB)

    PHILIPP, B.L.

    2000-01-12

    This document provides the calculations used to determine the error of safety class signals used for the CVD process These errors are used with the Parameter limits to arrive at the initial set point. The Safety Class Instrumentation and Control (SCIC) system provides active detection and response to process anomalies that, if unmitigated would result in a safety event. Specifically actuation of the SCIC system includes two portions. The portion which isolates the MCO and initiates the safety-class helium (SCHe) purge, and the portion which detects and stops excessive heat input to the MCO on high tempered water MCO inlet temperature. For the MCO isolation and purge the SCIC receives signals from MCO pressure (both positive pressure and vacuum) helium flow rate, bay high temperature switches, seismic trips and time under vacuum trips.

  16. Nanoelectronic biosensors based on CVD grown graphene

    Science.gov (United States)

    Huang, Yinxi; Dong, Xiaochen; Shi, Yumeng; Li, Chang Ming; Li, Lain-Jong; Chen, Peng

    2010-08-01

    Graphene, a single-atom-thick and two-dimensional carbon material, has attracted great attention recently. Because of its unique electrical, physical, and optical properties, graphene has great potential to be a novel alternative to carbon nanotubes in biosensing. We demonstrate the use of large-sized CVD grown graphene films configured as field-effect transistors for real-time biomolecular sensing. Glucose or glutamate molecules were detected by the conductance change of the graphene transistor as the molecules are oxidized by the specific redox enzyme (glucose oxidase or glutamic dehydrogenase) functionalized onto the graphene film. This study indicates that graphene is a promising candidate for the development of real-time nanoelectronic biosensors.Graphene, a single-atom-thick and two-dimensional carbon material, has attracted great attention recently. Because of its unique electrical, physical, and optical properties, graphene has great potential to be a novel alternative to carbon nanotubes in biosensing. We demonstrate the use of large-sized CVD grown graphene films configured as field-effect transistors for real-time biomolecular sensing. Glucose or glutamate molecules were detected by the conductance change of the graphene transistor as the molecules are oxidized by the specific redox enzyme (glucose oxidase or glutamic dehydrogenase) functionalized onto the graphene film. This study indicates that graphene is a promising candidate for the development of real-time nanoelectronic biosensors. Electronic supplementary information (ESI) available: AFM images of graphene film before and after functionalization, transfer curves of graphene after every step, SEM image of CNT-net, and detection results using CNT-net devices. See DOI: 10.1039/c0nr00142b

  17. Comprehensive metabolomic profiling and incident cardiovascular disease: a systematic review

    Science.gov (United States)

    Background: Metabolomics is a promising tool of cardiovascular biomarker discovery. We systematically reviewed the literature on comprehensive metabolomic profiling in association with incident cardiovascular disease (CVD). Methods and Results: We searched MEDLINE and EMBASE from inception to Janua...

  18. Diamond radiation detectors II. CVD diamond development for radiation detectors

    International Nuclear Information System (INIS)

    Kania, D.R.

    1997-01-01

    Interest in radiation detectors has supplied some of the impetus for improving the electronic properties of CVD diamond. In the present discussion, we will restrict our attention to polycrystalhne CVD material. We will focus on the evolution of these materials over the past decade and the correlation of detector performance with other properties of the material

  19. Influence of melt treatments and polished CVD diamond coated ...

    Indian Academy of Sciences (India)

    Performances of the turning inserts (uncoated and polished CVD diamond coated) were evaluated in machining Al–7Si and Al–7Si–2.5Cu cast alloys under dry environment using a lathe. The polished CVD diamond coated insert outperformed the uncoated cutting insert which suffered from sizeable edge buildup leading to ...

  20. Symptoms of Insomnia and Sleep Duration and Their Association with Incident Strokes: Findings from the Population-Based MONICA/KORA Augsburg Cohort Study.

    Science.gov (United States)

    Helbig, A Katharina; Stöckl, Doris; Heier, Margit; Ladwig, Karl-Heinz; Meisinger, Christa

    2015-01-01

    To examine the relationship between symptoms of insomnia and sleep duration and incident total (non-fatal plus fatal) strokes, non-fatal strokes, and fatal strokes in a large cohort of men and women from the general population in Germany. In four population-based MONICA (monitoring trends and determinants in cardiovascular disease)/KORA (Cooperative Health Research in the Region of Augsburg) surveys conducted between 1984 and 2001, 17,604 men and women (aged 25 to 74 years) were asked about issues like sleep, health behavior, and medical history. In subsequent surveys and mortality follow-ups, incident stroke cases (cerebral hemorrhage, ischemic stroke, transient ischemic attack, unknown stroke type) were gathered prospectively until 2009. Sex-specific hazard ratios (HR) and their 95% confidence intervals (CI) were estimated using sequential Cox proportional hazards regression models. During a mean follow-up of 14 years, 917 strokes (710 non-fatal strokes and 207 fatal strokes) were observed. Trouble falling asleep and difficulty staying asleep were not significantly related to any incident stroke outcome in either sex in the multivariable models. Among men, the HR for the association between short (≤5 hours) and long (≥10 hours) daily sleep duration and total strokes were 1.44 (95% CI: 1.01-2.06) and 1.63 (95% CI: 1.16-2.29), after adjustment for basic confounding variables. As for non-fatal strokes and fatal strokes, in the analyses adjusted for age, survey, education, physical activity, alcohol consumption, smoking habits, body mass index, hypertension, diabetes, and dyslipidemia, the increased risks persisted, albeit somewhat attenuated, but no longer remained significant. Among women, in the multivariable analyses the quantity of sleep was also not related to any stroke outcome. In the present study, symptoms of insomnia and exceptional sleep duration were not significantly predictive of incident total strokes, non-fatal strokes, and fatal strokes in

  1. Symptoms of Insomnia and Sleep Duration and Their Association with Incident Strokes: Findings from the Population-Based MONICA/KORA Augsburg Cohort Study.

    Directory of Open Access Journals (Sweden)

    A Katharina Helbig

    Full Text Available To examine the relationship between symptoms of insomnia and sleep duration and incident total (non-fatal plus fatal strokes, non-fatal strokes, and fatal strokes in a large cohort of men and women from the general population in Germany.In four population-based MONICA (monitoring trends and determinants in cardiovascular disease/KORA (Cooperative Health Research in the Region of Augsburg surveys conducted between 1984 and 2001, 17,604 men and women (aged 25 to 74 years were asked about issues like sleep, health behavior, and medical history. In subsequent surveys and mortality follow-ups, incident stroke cases (cerebral hemorrhage, ischemic stroke, transient ischemic attack, unknown stroke type were gathered prospectively until 2009. Sex-specific hazard ratios (HR and their 95% confidence intervals (CI were estimated using sequential Cox proportional hazards regression models.During a mean follow-up of 14 years, 917 strokes (710 non-fatal strokes and 207 fatal strokes were observed. Trouble falling asleep and difficulty staying asleep were not significantly related to any incident stroke outcome in either sex in the multivariable models. Among men, the HR for the association between short (≤5 hours and long (≥10 hours daily sleep duration and total strokes were 1.44 (95% CI: 1.01-2.06 and 1.63 (95% CI: 1.16-2.29, after adjustment for basic confounding variables. As for non-fatal strokes and fatal strokes, in the analyses adjusted for age, survey, education, physical activity, alcohol consumption, smoking habits, body mass index, hypertension, diabetes, and dyslipidemia, the increased risks persisted, albeit somewhat attenuated, but no longer remained significant. Among women, in the multivariable analyses the quantity of sleep was also not related to any stroke outcome.In the present study, symptoms of insomnia and exceptional sleep duration were not significantly predictive of incident total strokes, non-fatal strokes, and fatal strokes in

  2. CVD carbon powders modified by ball milling

    Directory of Open Access Journals (Sweden)

    Kazmierczak Tomasz

    2015-09-01

    Full Text Available Carbon powders produced using a plasma assisted chemical vapor deposition (CVD methods are an interesting subject of research. One of the most interesting methods of synthesizing these powders is using radio frequency plasma. This method, originally used in deposition of carbon films containing different sp2/sp3 ratios, also makes possible to produce carbon structures in the form of powder. Results of research related to the mechanical modification of these powders have been presented. The powders were modified using a planetary ball mill with varying parameters, such as milling speed, time, ball/powder mass ratio and additional liquids. Changes in morphology and particle sizes were measured using scanning electron microscopy and dynamic light scattering. Phase composition was analyzed using Raman spectroscopy. The influence of individual parameters on the modification outcome was estimated using statistical method. The research proved that the size of obtained powders is mostly influenced by the milling speed and the amount of balls. Powders tend to form conglomerates sized up to hundreds of micrometers. Additionally, it is possible to obtain nanopowders with the size around 100 nm. Furthermore, application of additional liquid, i.e. water in the process reduces the graphitization of the powder, which takes place during dry milling.

  3. CVD diamond deposition onto dental burs

    International Nuclear Information System (INIS)

    Ali, N.; Sein, H.

    2001-01-01

    A hot-filament chemical vapor deposition (HFCVD) system has been modified to enable non-planar substrates, such as metallic wires and dental burs, to be uniformly coated with thin polycrystalline diamond films. Initially, diamond deposition was carried out on titanium and tantalum wires in order to test and optimize the system. High growth rates of the order of approx. 8 /hr were obtained when depositing diamond on titanium wires using the vertical filament arrangement. However, lower growth rates of the order of 4-5meu m/hr were obtained with diamond deposition on tantalum wires. To extend the work towards a practical biomedical application tungsten carbide dental burs were coated with diamond films. The as-grown films were found to be polycrystalline and uniform over the cutting tip. Finally, the costs relating to diamond CVD onto dental burs have been presented in this paper. The costs relating to coating different number of burs at a time and the effect of film thickness on costs have been included in this investigation. (author)

  4. CVD diamond substrates for electronic devices

    International Nuclear Information System (INIS)

    Holzer, H.

    1996-03-01

    In this study the applicability of chemical vapor deposition (CVD) diamond as a material for heat spreaders was investigated. Economical evaluations on the production of heat spreaders were also performed. For the diamond synthesis the hot-filament and microwave method were used respectively. The deposition parameters were varied in a way that free standing diamond layers with a thickness of 80 to 750 microns and different qualities were obtained. The influence of the deposition parameters on the relevant film properties was investigated and discussed. With both the hot-filament and microwave method it was possible to deposit diamond layers having a thermal conductivity exceeding 1200 W/mK and therefore to reach the quality level for commercial uses. The electrical resistivity was greater than 10 12 Ωcm. The investigation of the optical properties was done by Raman-, IR- and cathodoluminescence spectroscopy. Because of future applications of diamond-aluminium nitride composites as highly efficient heat spreaders diamond deposition an AIN was investigated. An improved substrate pretreatment prior to diamond deposition showed promising results for better performance of such composite heat spreaders. Both free standing layers and diamond-AIN composites could be cut by a CO2 Laser in Order to get an exact size geometry. A reduction of the diamond surface roughness was achieved by etching with manganese powder or cerium. (author)

  5. CVD-Graphene-Based Flexible, Thermoelectrochromic Sensor

    Directory of Open Access Journals (Sweden)

    Adam Januszko

    2017-01-01

    Full Text Available The main idea behind this work was demonstrated in a form of a new thermoelectrochromic sensor on a flexible substrate using graphene as an electrically reconfigurable thermal medium (TEChrom™. Our approach relies on electromodulation of thermal properties of graphene on poly(ethylene terephthalate (PET via mechanical destruction of a graphene layer. Graphene applied in this work was obtained by chemical vapor deposition (CVD technique on copper substrate and characterized by Raman and scanning tunneling spectroscopy. Electrical parameters of graphene were evaluated by the van der Pauw method on the transferred graphene layers onto SiO2 substrates by electrochemical delamination method. Two configurations of architecture of sensors, without and with the thermochromic layer, were investigated, taking into account the increase of voltage from 0 to 50 V and were observed by thermographic camera to define heat energy. Current-voltage characteristics obtained for the sensor with damaged graphene layer are linear, and the resistivity is independent from the current applied. The device investigated under 1000 W/m2 exhibited rise of resistivity along with increased temperature. Flexible thermoelectrochromic device with graphene presented here can be widely used as a sensor for both the military and civil monitoring.

  6. Variations of CHI3L1, levels of the encoded glycoprotein YKL-40 and prediction of fatal and non-fatal ischemic stroke

    DEFF Research Database (Denmark)

    Rathcke, Camilla Noelle; Thomsen, Stine Brinkloev; Linneberg, Allan

    2012-01-01

    BACKGROUND: Polymorphisms of CHI3L1 are associated with inter-individual YKL-40 levels and YKL-40 is associated with an increased mortality and is elevated in patients with cardiovascular disease. We investigated the association between single nucleotide polymorphisms (SNPs) of CHI3L1, serum YKL-40...... levels and all-cause and cardiovascular mortality and first-time incidence of myocardial infarction, ischemic heart disease (IHD) and stroke. METHODOLOGY/PRINCIPAL FINDINGS: 12 SNPs of CHI3L1 were genotyped and serum YKL-40 was measured in 2656 Danes representative of the general population. Median...

  7. Depressive symptomatology in relation to 10-year (2004-2014) acute coronary syndrome incidence; the moderating role of diet and financial status.

    Science.gov (United States)

    Notara, Venetia; Panagiotakos, Demosthenes B; Tsompanaki, Elena; Kouvari, Matina; Kogias, Yannis; Papanagnou, George; Antonoulas, Antonis; Stravopodis, Petros; Zombolos, Spyros; Stergiouli, Ifigenia; Mantas, Yannis; Babatsikou, Fotoula; Pitsavos, Christos

    2016-05-01

    The association between depression status and 10-year cardiovascular disease (CVD) incidence among acute coronary syndrome (ACS) patients, in relation to nutritional and financial status, was evaluated. From October 2003 to September 2004, a sample of 2172 consecutive ACS patients from 6 Greek hospitals was enrolled. In 2013-14, the 10-year follow-up was performed. Depressive symptoms were evaluated using the validated CES-D score (range 0-60). Adherence to Mediterranean diet was assessed through MedDietScore (range 0-55) and financial status was determined by the annual income. Ranking from the 1st to 3rd CES-D tertile, recurrent fatal/non fatal ACS rates were 33%, 37% and 42%, respectively (p=0.006). Multiple logistic regression models revealed an adverse association of severe depression status (i.e. 3rd tertile) compared to no depression (i.e. 1st tertile) [odds ratio (OR)=1.31, 95% confidence interval (95% CI) 1.01, 1.69]. When controlling for financial status, the relationship between depression and ACS prognosis remained marginally significant; while subgroup analysis revealed that only patients with low/moderate income were negatively affected [OR=1.36, 95% CI 0.98, 1.88]. Further stratified analysis, by MedDietScore group, was applied; the above association remained significant only in patients with low compliance to this dietary pattern [OR=1.68, 95% CI 1.10, 2.18]. ACS coexisting with severe depression status seems to result in adverse disease outcomes while financial status and Mediterranean diet are proposed as potential moderators. Public health programs should focus on vulnerable groups and minimize depressive symptoms through appropriate medical treatment and lifestyle interventions, so as to ameliorate the disease prognosis in clinical and community levels. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. Coffee consumption is not associated with prevalent subclinical cardiovascular disease (CVD) or the risk of CVD events, in nonalcoholic fatty liver disease: results from the multi-ethnic study of atherosclerosis.

    Science.gov (United States)

    Simon, Tracey G; Trejo, Maria Esther Perez; Zeb, Irfan; Frazier-Wood, Alexis C; McClelland, Robyn L; Chung, Raymond T; Budoff, Matthew J

    2017-10-01

    Atherosclerosis and its clinical sequelae represent the leading cause of mortality among patients with nonalcoholic fatty liver disease (NAFLD). While epidemiologic data support the hepatoprotective benefits of coffee in NAFLD, whether coffee improves NAFLD-associated CVD risk is unknown. We examined 3710 ethnically-diverse participants from the Multi-Ethnic Study of Atherosclerosis (MESA) cohort, without history of known liver disease, and with available coffee data from a validated 120-item food frequency questionnaire. All participants underwent baseline non-contrast cardiac CT from which NAFLD was defined by liver:spleen ratio (L:S0. Major CVD events were defined by the first occurrence of myocardial infarction, cardiac arrest, angina, stroke, or CVD death. We used log-binomial regression to calculate the adjusted prevalence ratio (PR) for CAC>0 by coffee intake and NAFLD status, and events were compared between groups using frequency of events within adjusted Cox proportional hazard regression models. Seventeen percent (N=637) of participants met criteria for NAFLD. NAFLD participants were more likely to have elevated BMI (mean 31.1±5.5kg/m 2 vs. 28.0±5.2kg/m 2 , pcoffee consumption (p=0.97). Among NAFLD participants, coffee consumption was not associated with prevalent, baseline CAC>0 (PR=1.02 [0.98-1.07]). Over 12.8years of follow-up, 93 NAFLD and 415 non-NAFLD participants experienced a CV event. However, coffee intake was not associated with incident CVD events, in either NAFLD (HR=1.05 [0.91-1.21]) or non-NAFLD participants (HR=1.03 [0.97-1.11]). In a large, population-based cohort, coffee consumption was not associated with the prevalence of subclinical CVD, nor did coffee impact the future risk of major CVD events, regardless of underlying NAFLD status. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. Lifestyle factors and risk of cardiovascular diseases

    NARCIS (Netherlands)

    Hoevenaar-Blom, M.P.

    2013-01-01

    Background

    Evidence is accumulating that lifestyle factors influence the incidence of fatal and non-fatal cardiovascular diseases (CVD). A healthy diet, being physically active, moderate alcohol consumption and not smoking are associated with a lower CVD risk. In

  10. Lifestyle factors and risk of cardiovascular diseases

    NARCIS (Netherlands)

    Hoevenaar-Blom, M.P.

    2013-01-01

     Background Evidence is accumulating that lifestyle factors influence the incidence of fatal and non-fatal cardiovascular diseases (CVD). A healthy diet, being physically active, moderate alcohol consumption and not smoking are associated with a lower CVD risk. In addition to

  11. Investigation of defects in CVD diamond: Influence for radiotherapy applications

    International Nuclear Information System (INIS)

    Guerrero, M.J.; Tromson, D.; Bergonzo, P.; Barrett, R.

    2005-01-01

    In this study we present the potentialities of CVD diamond as an ionisation chamber for radiotherapy applications. Trapping levels present in CVD diamond are characterised using Thermally Stimulated Current (TSC) method with X-ray sources. The influence of the corresponding defects on the detector response is investigated and compared to those observed in natural diamond. Also, their spatial distribution across a large area polycrystalline diamond ionisation chamber is discussed. Results show the relative influence of two different populations of trapping levels in CVD diamond whose effect is crucial for radiotherapy applications. To partially overcome the defect detrimental effects, we propose to use CVD diamond ionisation chambers at moderate temperatures from 70 to 100 deg. C that could be provided by self heating of the device, for a dramatically improved stability and reproducibility

  12. Improvements in CVD diamond properties for radiotherapy dosimetry

    International Nuclear Information System (INIS)

    De Angelis, C.; Bucciolini, M.; Casati, M.; Loevik, I.; Bruzzi, M.; Lagomarsino, S.; Sciortino, S.; Onori, S.

    2006-01-01

    The goal of this work was to compare the behaviour of a chemical vapour deposited (CVD) diamond sample, grown at the Univ. of Florence using a local procedure, with that of a commercial CVD diamond. The comparison was performed exposing both systems to 25 MV photons and measuring the current response during irradiation. Properties of dosimetric interest such as stability of response, dose rate dependence and rise time were investigated. After a preliminary study, which evidenced better performances of the commercial device with respect to the local CVD diamond, the latter was irradiated with a high fluence of fast neutrons. As a result of the neutron treatment, the quality of the CVD home-made diamond has been improved to match with that of the commercial dosemeter. (authors)

  13. CVD refractory metals and alloys for space nuclear power application

    International Nuclear Information System (INIS)

    Yang, L.; Gulden, T.D.; Watson, J.F.

    1984-01-01

    CVD technology has made significant contributions to the development of space nuclear power systems during the period 1962 to 1972. For the in-core thermionic concept, CVD technology is essential to the fabrication of the tungsten electron emitter. For the liquid metal cooled fuel pin using uranium nitride as fuel and T-111 and Nb-1 Zr as cladding, a tungsten barrier possibly produced by CVD methods is essential to the fuel-cladding compatibility at the designed operating temperature. Space power reactors may use heat pipes to transfer heat from the reactor core to the conversion system. CVD technology has been used for fabricating the heat pipe used as cross-flow heat exchanger, including the built-in channels on the condenser wall for liquid lithium return. 28 references, 17 figures

  14. CVD Diamond Sensors In Detectors For High Energy Physics

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00334150; Trischuk, William

    At the end of the next decade an upgrade of the Large Hadron Collider (LHC) to High Luminosity LHC (HL-LHC) is planned which requires the development of new radiation tolerant sensor technology. Diamond is an interesting material for use as a particle detector in high radiation environments. The large band gap ($5.47\\,\\text{eV}$) and the large displacement energy suggest that diamond is a radiation tolerant detector material. In this Thesis the capability of Chemical Vapor Deposition (CVD) diamond as such a sensor technology is investigated. The radiation damage constant for $800\\,\\text{MeV}$ protons is measured using single crystalline CVD (scCVD) and polycrystalline CVD (pCVD) diamonds irradiated to particle fluences up to $12 \\times 10^{15}\\,\\text{p/cm}^2$. In addition the signal response of a pCVD diamond detector after an irradiation to $12 \\times 10^{15}\\,\\text{p/cm}^2$ is investigated to determine if such a detector can be operated efficiently in the expected HL-LHC environment. By using electrodes em...

  15. Ion beam figuring of CVD silicon carbide mirrors

    Science.gov (United States)

    Gailly, P.; Collette, J.-P.; Fleury Frenette, K.; Jamar, C.

    2017-11-01

    Optical and structural elements made of silicon carbide are increasingly found in space instruments. Chemical vapor deposited silicon carbide (CVD-SiC) is used as a reflective coating on SiC optics in reason of its good behavior under polishing. The advantage of applying ion beam figuring (IBF) to CVD-SiC over other surface figure-improving techniques is discussed herein. The results of an IBF sequence performed at the Centre Spatial de Liège on a 100 mm CVD-SiC mirror are reported. The process allowed to reduce the mirror surface errors from 243 nm to 13 nm rms . Beside the surface figure, roughness is another critical feature to consider in order to preserve the optical quality of CVD-SiC . Thus, experiments focusing on the evolution of roughness were performed in various ion beam etching conditions. The roughness of samples etched at different depths down to 3 ≠m was determined with an optical profilometer. These measurements emphasize the importance of selecting the right combination of gas and beam energy to keep roughness at a low level. Kaufman-type ion sources are generally used to perform IBF but the performance of an end-Hall ion source in figuring CVD-SiC mirrors was also evaluated in this study. In order to do so, ion beam etching profiles obtained with the end-Hall source on CVD-SiC were measured and used as a basis for IBF simulations.

  16. Global, regional, and national incidence, prevalence, and years lived with disability for 310 diseases and injuries, 1990–2015

    OpenAIRE

    Vos, Theo; Allen, Christine; Arora, Megha; Barber, R.M.; Bhutta, Zulfiqar; Brown, Alexandria; Carter, Austin; Casey, Daniel C.; Charlson, Fiona J.; Chen, Alan Z.; Geleijnse, J.M.

    2016-01-01

    BackgroundNon-fatal outcomes of disease and injury increasingly detract from the ability of the world's population to live in full health, a trend largely attributable to an epidemiological transition in many countries from causes affecting children, to non-communicable diseases (NCDs) more common in adults. For the Global Burden of Diseases, Injuries, and Risk Factors Study 2015 (GBD 2015), we estimated the incidence, prevalence, and years lived with disability for diseases and injuries at t...

  17. Synthesis of CVD-graphene on rapidly heated copper foils

    Science.gov (United States)

    Kim, Sang-Min; Kim, Jae-Hyun; Kim, Kwang-Seop; Hwangbo, Yun; Yoon, Jong-Hyuk; Lee, Eun-Kyu; Ryu, Jaechul; Lee, Hak-Joo; Cho, Seungmin; Lee, Seung-Mo

    2014-04-01

    Most chemical vapor deposition (CVD) systems used for graphene growth mainly employ convection and radiation heat transfer between the heating source and the metal catalyst in order to reach the activation temperature of the reaction, which in general leads to a long synthesis time and poor energy efficiency. Here, we report a highly time- and energy-efficient CVD setup, in which the metal catalyst (Cu) is designed to be physically contacted with a heating source to give quick heat transfer by conduction. The induced conduction heating enabled the usual effects of the pretreatment and annealing of Cu (i.e., annihilation of surface defects, impurities and contaminants) to be achieved in a significantly shorter time compared to conventional CVD. Notably, the rapid heating was observed to lead to larger grains of Cu with high uniformity as compared to the Cu annealed by conventional CVD, which are believed to be beneficial for the growth of high quality graphene. Through this CVD setup, bundles of high quality (~252 Ω per square) and large area (over 16 inch) graphenes were able to be readily synthesized in 40 min in a significantly efficient way. When considering ease of scalability, high energy effectiveness and considerable productivity, our method is expected to be welcomed by industrialists.Most chemical vapor deposition (CVD) systems used for graphene growth mainly employ convection and radiation heat transfer between the heating source and the metal catalyst in order to reach the activation temperature of the reaction, which in general leads to a long synthesis time and poor energy efficiency. Here, we report a highly time- and energy-efficient CVD setup, in which the metal catalyst (Cu) is designed to be physically contacted with a heating source to give quick heat transfer by conduction. The induced conduction heating enabled the usual effects of the pretreatment and annealing of Cu (i.e., annihilation of surface defects, impurities and contaminants) to be

  18. Low-temperature graphene synthesis using microwave plasma CVD

    Science.gov (United States)

    Yamada, Takatoshi; Kim, Jaeho; Ishihara, Masatou; Hasegawa, Masataka

    2013-02-01

    The graphene chemical vapour deposition (CVD) technique at substrate temperatures around 300 °C by a microwave plasma sustained by surface waves (surface wave plasma chemical vapour deposition, SWP-CVD) is discussed. A low-temperature, large-area and high-deposition-rate CVD process for graphene films was developed. It was found from Raman spectra that the deposited films on copper (Cu) substrates consisted of high-quality graphene flakes. The fabricated graphene transparent conductive electrode showed uniform optical transmittance and sheet resistance, which suggests the possibility of graphene for practical electrical and optoelectronic applications. It is intriguing that graphene was successfully deposited on aluminium (Al) substrates, for which we did not expect the catalytic effect to decompose hydrocarbon and hydrogen molecules. We developed a roll-to-roll SWP-CVD system for continuous graphene film deposition towards industrial mass production. A pair of winder and unwinder systems of Cu film was installed in the plasma CVD apparatus. Uniform Raman spectra were confirmed over the whole width of 297 mm of Cu films. We successfully transferred the deposited graphene onto PET films, and confirmed a transmittance of about 95% and a sheet resistance of less than 7 × 105 Ω/sq.

  19. Cardiovascular risks associated with incident and prevalent periodontal disease.

    Science.gov (United States)

    Yu, Yau-Hua; Chasman, Daniel I; Buring, Julie E; Rose, Lynda; Ridker, Paul M

    2015-01-01

    While prevalent periodontal disease associates with cardiovascular risk, little is known about how incident periodontal disease influences future vascular risk. We compared effects of incident versus prevalent periodontal disease in developing major cardiovascular diseases (CVD), myocardial infarction (MI), ischaemic stroke and total CVD. In a prospective cohort of 39,863 predominantly white women, age ≥45 years and free of cardiovascular disease at baseline were followed for an average of 15.7 years. Cox proportional hazard models with time-varying periodontal status [prevalent (18%), incident (7.3%) versus never (74.7%)] were used to assess future cardiovascular risks. Incidence rates of all CVD outcomes were higher in women with prevalent or incident periodontal disease. For women with incident periodontal disease, risk factor adjusted hazard ratios (HRs) were 1.42 (95% CI, 1.14-1.77) for major CVD, 1.72 (1.25-2.38) for MI, 1.41 (1.02-1.95) for ischaemic stroke and 1.27 (1.06-1.52) for total CVD. For women with prevalent periodontal disease, adjusted HRs were 1.14 (1.00-1.31) for major CVD, 1.27 (1.04-1.56) for MI, 1.12 (0.91-1.37) for ischaemic stroke and 1.15 (1.03-1.28) for total CVD. New cases of periodontal disease, not just those that are pre-existing, place women at significantly elevated risks for future cardiovascular events. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  20. Model of PE-CVD Apparatus: Verification and Simulations

    Directory of Open Access Journals (Sweden)

    J. Geiser

    2010-01-01

    Full Text Available In this paper, we present a simulation of chemical vapor deposition with metallic bipolar plates. In chemical vapor deposition, a delicate optimization between temperature, pressure and plasma power is important to obtain homogeneous deposition. The aim is to reduce the number of real-life experiments in a given CVD plasma reactor. Based on the large physical parameter space, there are a hugh number of possible experiments. A detailed study of the physical experiments in a CVD plasma reactor allows to reduce the problem to an approximate mathematical model, which is the underlying transport-reaction model. Significant regions of the CVD apparatus are approximated and physical parameters are transferred to the mathematical parameters. Such an approximation reduces the mathematical parameter space to a realistic number of numerical experiments. The numerical results are discussed with physical experiments to give a valid model for the assumed growth and we could reduce expensive physical experiments.

  1. CVD prevention strategies with urban and rural African American women.

    Science.gov (United States)

    Williams, Armenia; Wold, Judith; Dunkin, Jeri; Idleman, Lynda; Jackson, Cennette

    2004-08-01

    Using Pender's Health Promotion Model, this study tested a work site cardiovascular disease (CVD) risk factor reduction intervention among low-income African American (LAAW) women. Individual CVD risk profiles were identified at the work site through (1) health risk appraisal, (2) blood pressure measurement, (3) body mass index calculation, (4) individual interviews about diet and exercise behaviors, and (5) total cholesterol analysis. Two LAAW groups, one urban and one rural, exhibited higher or similar pretest CVD relative risks (RR) when statistically compared with a national sample of African American women. The LAAW study samples were younger and more educated. Pretest cholesterol and fat intake for the rural women were higher than for the urban women (<.05). Posttest changes in cholesterol and fat intake risks were more significant in rural LAAW than in urban LAAW (<.05).

  2. Investigation on the priming effect of a CVD diamond microdosimeter

    CERN Document Server

    Lu Rong Rong; Jiang Da; Li Xiao Lin; Zhu Jie Qing

    2002-01-01

    CVD diamond microdosimeter is an ideal substitute of common Si, GaAs detector for extremely strong radiation experimental environmental due to its high band gap energy, fast charge collection, low dielectric constant and hardness. In order to improve its character, a CVD diamond microdosimeter was irradiated by a proton dose of 46 Gy, and a lateral micro-ion beam induced charge (IBIC) technique was utilized to characterize it in low beam current (approx fA). It was clearly shown that charge collection efficiency and energy resolution were greatly improved after proton irradiation of that dose. Moreover, the homogeneities of both its counting performance and collection efficiency were enhanced. Proton irradiation of 46 Gy has been proved to be an effective way to prime a CVD diamond

  3. Origin of residual particles on transferred graphene grown by CVD

    Science.gov (United States)

    Yasunishi, Tomohiro; Takabayashi, Yuya; Kishimoto, Shigeru; Kitaura, Ryo; Shinohara, Hisanori; Ohno, Yutaka

    2016-08-01

    Large-area single-layer graphene can be grown on Cu foil by CVD, but for device applications, the layer must to be transferred onto an insulating substrate. As residual particles are often observed on transferred graphene, we investigated their origin using scanning electron microscopy and energy-dispersive X-ray spectrometry (EDX). The results show that these residual particles are composed either of silicon or an alloy of a few metals, and hence, likely originate from the quartz tube of the CVD furnace and the impurities contained in the Cu foil.

  4. CVD Growth of Carbon Nanotubes: Structure, Catalyst, and Growth

    Science.gov (United States)

    Delzeit, Lance

    2003-01-01

    Carbon nanotubes (CNTs) exhibit extraordinary mechanical and unique electronic properties and hence have been receiving much attention in recent years for their potential in nanoelectronics, field emission devices, scanning probes, high strength composites and many more applications. Catalytic decomposition of hydrocarbon feedstock with the aid of supported transition metal catalysts - also known as chemical vapor deposition (CVD) - has become popular to produce single-walled and multi-walled nanotubes (SWNTs, MWNTs) and multiwalled nanofibers (MWNFs). The ability to grow CNTs on patterned substrates and in vertically aligned arrays, and the simplicity of the process, has made CVD growth of CNTs an attractive approach.

  5. Number of recent stressful life events and incident cardiovascular disease: Moderation by lifetime depressive disorder.

    Science.gov (United States)

    Berntson, Jessica; Patel, Jay S; Stewart, Jesse C

    2017-08-01

    We investigated whether number of recent stressful life events is associated with incident cardiovascular disease (CVD) and whether this relationship is stronger in adults with a history of clinical depression. Prospective data from 28,583 U.S. adults (mean age=45years) initially free of CVD who participated in Waves 1 (2001-2002) and 2 (2004-2005) of the National Epidemiologic Survey on Alcohol and Related Conditions (NESARC) were examined. Number of past-year stressful life events (Wave 1), lifetime depressive disorder (Wave 1), and incident CVD (Wave 2) were determined by structured interviews. There were 1069 cases of incident CVD. Each additional stressful life event was associated with a 15% increased odds of incident CVD [Odds Ratio (OR)=1.15, 95% Confidence Interval (CI): 1.11, 1.19]. As hypothesized, a stressful life events by lifetime depressive disorder interaction was detected (P=0.003). Stratified analyses indicated that stressful life events had a stronger association with incident CVD among adults with (OR=1.18, 95% CI: 1.10, 1.27, n=4908) versus without (OR=1.10, 95% CI: 1.07, 1.14, n=23,675) a lifetime depressive disorder. Our findings suggest that a greater number of recent stressful life events elevate the risk of new-onset CVD and that this risk is potentiated in adults with a history of clinical depression. Copyright © 2017 Elsevier Inc. All rights reserved.

  6. CVD-graphene for low equivalent series resistance in rGO/CVD-graphene/Ni-based supercapacitors

    Science.gov (United States)

    Kwon, Young Hwi; Kumar, Sunil; Bae, Joonho; Seo, Yongho

    2018-05-01

    Reduced equivalent series resistance (ESR) is necessary, particularly at a high current density, for high performance supercapacitors, and the interface resistance between the current collector and electrode material is one of the main components of ESR. In this report, we have optimized chemical vapor deposition-grown graphene (CVD-G) on a current collector (Ni-foil) using reduced graphene oxide as an active electrode material to fabricate an electric double layer capacitor with reduced ESR. The CVD-G was grown at different cooling rates—20 °C min‑1, 40 °C min‑1 and 100 °C min‑1—to determine the optimum conditions. The lowest ESR, 0.38 Ω, was obtained for a cell with a 100 °C min‑1 cooling rate, while the sample without a CVD-G interlayer exhibited 0.80 Ω. The CVD-G interlayer-based supercapacitors exhibited fast CD characteristics with high scan rates up to 10 Vs‑1 due to low ESR. The specific capacitances deposited with CVD-G were in the range of 145.6 F g‑1–213.8 F g‑1 at a voltage scan rate of 0.05 V s‑1. A quasi-rectangular behavior was observed in the cyclic voltammetry curves, even at very high scan rates of 50 and 100 V s‑1, for the cell with optimized CVD-G at higher cooling rates, i.e. 100 °C min‑1.

  7. Relations of serum phosphorus and calcium levels to the incidence of cardiovascular disease in the community.

    Science.gov (United States)

    Dhingra, Ravi; Sullivan, Lisa M; Fox, Caroline S; Wang, Thomas J; D'Agostino, Ralph B; Gaziano, J Michael; Vasan, Ramachandran S

    2007-05-14

    Higher levels of serum phosphorus and the calcium-phosphorus product are associated with increased mortality from cardiovascular disease (CVD) in patients with chronic kidney disease (CKD) or prior CVD. However, it is unknown if serum phosphorus levels influence vascular risk in individuals without CKD or CVD. We prospectively evaluated 3368 Framingham Offspring study participants (mean age, 44 years; 51% were women) free of CVD and CKD. We used multivariable Cox models to relate serum phosphorus and calcium levels to CVD incidence. On follow-up (mean duration, 16.1 years), there were 524 incident CVD events (159 in women). In multivariable analyses and adjusting for established risk factors and additionally for glomerular filtration rate and for hemoglobin, serum albumin, proteinuria, and C-reactive protein levels, a higher level of serum phosphorus was associated with an increased CVD risk in a continuous fashion (adjusted hazard ratio per increment of milligrams per deciliter, 1.31; 95% confidence interval, 1.05-1.63; P=.02; P value for trend across quartiles = .004). Individuals in the highest serum phosphorus quartile experienced a multivariable-adjusted 1.55-fold CVD risk (95% confidence interval, 1.16%-2.07%; P=.004) compared with those in the lowest quartile. These findings remained robust in time-dependent models that updated CVD risk factors every 4 years and in analyses restricted to individuals without proteinuria and an estimated glomerular filtration rate greater than 90 mL/min per 1.73 m(2). Serum calcium was not related to CVD risk. Higher serum phosphorus levels are associated with an increased CVD risk in individuals free of CKD and CVD in the community. These observations emphasize the need for additional research to elucidate the potential link between phosphorus homeostasis and vascular risk.

  8. Enhancing the mechanical properties of single-crystal CVD diamond.

    Science.gov (United States)

    Liang, Qi; Yan, Chih-Shiue; Meng, Yufei; Lai, Joseph; Krasnicki, Szczesny; Mao, Ho-Kwang; Hemley, Russell J

    2009-09-09

    Approaches for enhancing the strength and toughness of single-crystal diamond produced by chemical vapor deposition (CVD) at high growth rates are described. CVD processes used to grow single-crystal diamond in high density plasmas were modified to incorporate boron and nitrogen. Semi-quantitative studies of mechanical properties were carried out using Vickers indentation techniques. The introduction of boron in single-crystal CVD diamond can significantly enhance the fracture toughness of this material without sacrificing its high hardness (∼78 GPa). Growth conditions were varied to investigate its effect on boron incorporation and optical properties by means of photoluminescence, infrared, and ultraviolet-visible absorption spectroscopy. Boron can be readily incorporated into single-crystal diamond by the methods used, but with nitrogen addition, the incorporation of boron was hindered. The spectroscopic measurements indicate that nitrogen and boron coexist in the diamond structure, which helps explain the origin of the enhanced fracture toughness of this material. Further, low pressure/high temperature annealing can enhance the intrinsic hardness of single-crystal CVD diamond by a factor of two without appreciable loss in fracture toughness. This doping and post-growth treatment of diamond may lead to new technological applications that require enhanced mechanical properties of diamond.

  9. Electrochemical properties of undoped hydrogen terminated CVD diamond

    Czech Academy of Sciences Publication Activity Database

    Nebel, C.E.; Kato, H.; Rezek, Bohuslav; Shin, D.; Takeuchi, D.; Watanabe, H.; Yamamoto, T.

    2006-01-01

    Roč. 15, - (2006), s. 264-268 ISSN 0925-9635 Institutional research plan: CEZ:AV0Z10100521 Keywords : ion-sensitive field effect transistor * intrinsic CVD diamond * hydrogen termination, Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.935, year: 2006

  10. Diamond like carbon coatings deposited by microwave plasma CVD ...

    Indian Academy of Sciences (India)

    WINTEC

    Diamond-like carbon (DLC) films were deposited by microwave assisted chemical vapour deposi- tion system using d.c. bias voltage ... Diamond like carbon films; microwave assisted CVD; X-ray photoelectron spectroscopy; spectro- scopic ellipsometry. 1. .... The electrical resistivity of these films was higher than 200 MΩ ...

  11. CVD polycrystalline diamond. A novel neutron detector and applications

    International Nuclear Information System (INIS)

    Mongkolnavin, R.

    1998-07-01

    Chemical Vapour Deposition (CVD) Polycrystalline Diamond film has been investigated as a low noise sensor for beta particles, gammas and neutrons using High Energy Physics technologies. Its advantages and disadvantages have been explored in comparison with other particle detectors such as silicon detector and other plastic scintillators. The performance and characteristic of the diamond detector have been fully studied and discussed. These studies will lead to a better understanding of how CVD diamonds perform as a detector and how to improve their performance under various conditions. A CVD diamond detector model has been proposed which is an attempt to explain the behaviour of such an extreme detector material. A novel neutron detector is introduced as a result of these studies. A good thermal and fast neutron detector can be fabricated with CVD diamond with new topologies. This detector will perform well without degradation in a high neutron radiation environment, as diamond is known to be radiation-hard. It also offers better neutrons and gammas discrimination for high gamma background applications compared to other semiconductor detectors. A full simulation of the detector has also been done using GEANT, a Monte Carlo simulation program for particle detectors. Simulation results show that CVD diamond detectors with this novel topology can detect neutrons with great directionality. Experimental work has been done on this detector in a nuclear reactor environment and accelerator source. A novel neutron source which offers a fast pulse high-energy neutrons has also been studied. With this detector, applications in neutron spectrometry for low-Z material have been pursued with various neutron detection techniques. One of these is a low-Z material identification system. The system has been designed and simulated for contraband luggage interrogation using the detector and the novel neutron source. (author)

  12. Changes in CVD risk factors in the activity counseling trial

    Directory of Open Access Journals (Sweden)

    Meghan Baruth

    2011-01-01

    Full Text Available Meghan Baruth1, Sara Wilcox1, James F Sallis3, Abby C King4,5, Bess H Marcus6, Steven N Blair1,21Department of Exercise Science, 2Department of Epidemiology and Biostatistics, Arnold School of Public Health, University of South Carolina, Public Health Research Center, Columbia, SC, USA; 3Department of Psychology, San Diego State University, San Diego, CA, USA; 4Department of Health Research and Policy, 5Stanford Prevention Research Center, Department of Medicine, Stanford University School of Medicine, Stanford, CA, USA; 6Behavioral and Social Sciences Section, Brown University Program in Public Health, Providence, RI, USAAbstract: Primary care facilities may be a natural setting for delivering interventions that focus on behaviors that improve cardiovascular disease (CVD risk factors. The purpose of this study was to examine the 24-month effects of the Activity Counseling Trial (ACT on CVD risk factors, to examine whether changes in CVD risk factors differed according to baseline risk factor status, and to examine whether changes in fitness were associated with changes in CVD risk factors. ACT was a 24-month multicenter randomized controlled trial to increase physical activity. Participants were 874 inactive men and women aged 35–74 years. Participants were randomly assigned to one of three arms that varied by level of counseling, intensity, and resource requirements. Because there were no significant differences in change over time between arms on any of the CVD risk factors examined, all arms were combined, and the effects of time, independent of arm, were examined separately for men and women. Time × Baseline risk factor status interactions examined whether changes in CVD risk factors differed according to baseline risk factor status. Significant improvements in total cholesterol, high-density lipoprotein cholesterol (HDL-C and low-density lipoprotein cholesterol, the ratio of total cholesterol to HDL-C, and triglycerides were seen in

  13. Atherosclerosis profile and incidence of cardiovascular events: a population-based survey

    Directory of Open Access Journals (Sweden)

    Bullano Michael F

    2009-09-01

    Full Text Available Abstract Background Atherosclerosis is a chronic progressive disease often presenting as clinical cardiovascular disease (CVD events. This study evaluated the characteristics of individuals with a diagnosis of atherosclerosis and estimated the incidence of CVD events to assist in the early identification of high-risk individuals. Methods Respondents to the US SHIELD baseline survey were followed for 2 years to observe incident self-reported CVD. Respondents had subclinical atherosclerosis if they reported a diagnosis of narrow or blocked arteries/carotid artery disease without a past clinical CVD event (heart attack, stroke or revascularization. Characteristics of those with atherosclerosis and incident CVD were compared with those who did not report atherosclerosis at baseline but had CVD in the following 2 years using chi-square tests. Logistic regression model identified characteristics associated with atherosclerosis and incident events. Results Of 17,640 respondents, 488 (2.8% reported having subclinical atherosclerosis at baseline. Subclinical atherosclerosis was associated with age, male gender, dyslipidemia, circulation problems, hypertension, past smoker, and a cholesterol test in past year (OR = 2.2 [all p Conclusion Self-report of subclinical atherosclerosis identified an extremely high-risk group with a >25% risk of a CVD event in the next 2 years. These characteristics may be useful for identifying individuals for more aggressive diagnostic and therapeutic efforts.

  14. Prevalencia de accidentes de tránsito no fatales en México: resultados de la ENSANUT 2006 Prevalence of non-fatal road traffic injuries in Mexico: results from ENSANUT 2006

    Directory of Open Access Journals (Sweden)

    Leticia Ávila-Burgos

    2008-01-01

    Full Text Available OBJETIVO: Determinar la prevalencia y distribución de los accidentes de tránsito no fatales (ATNF en México. MATERIAL Y MÉTODOS: Se utilizaron datos de la ENSANUT 2006. En los hogares visitados se seleccionó a un adulto, un adolescente y un niño, hasta conformar una muestra de 94197 sujetos que representa a la N de 102 886 482 individuos. La variable dependiente fue la prevalencia de ATNF en los 12 meses anteriores a la encuesta. RESULTADOS: La prevalencia de accidentes (de tránsito o no fue de 6.0% y de esa cifra 16.7% correspondió a ATNF. Los hombres del grupo de 20 a 44 años, los habitantes de áreas urbanas y los de mejor nivel socioeconómico (NSE presentaron mayor prevalencia (pOBJECTIVE: To determine non-fatal road traffic injuries (NFRTI prevalence and its distribution in Mexico. MATERIAL AND METHODS: Data from ENSANUT Survey 2006 were used. Using simple random sampling, one adult, one adolescent and one child were selected in each household, constituting a final sample of 94 197 representing an N of 102 886 482 people. The dependent variable was the prevalence of road traffic injuries (RTI during the 12 months prior to the survey. RESULTS: The general accident prevalence was 6.0%; 16.7% corresponded to NFRTI. Men in the 20 to 44 age group living in urban areas and with high socioeconomic status had a higher RTI prevalence (p<0.05. Jalisco, Aguascalientes and Sonora were states with the highest prevalence of RTI, while Guerrero, Michoacan and Oaxaca were those with the lowest. CONCLUSIONS: NFRTI are frequent in Mexico and they are concentrated among men in productive ages in urban areas; they are associated with socioeconomic status at the individual level and with the state's development at the population level.

  15. Determinants of social inequalities in stroke incidence across Europe

    DEFF Research Database (Denmark)

    Ferrario, Marco M.; Veronesi, Giovanni; Kee, Frank

    2017-01-01

    Europe. Materials and methods: The MORGAM (MOnica Risk, Genetics, Archiving and Monograph) Study comprises 48 cohorts recruited mostly in the 1980s and 1990s in four European regions using standardised procedures for baseline risk factor assessment and fatal and non-fatal stroke ascertainment......Background: Knowledge on the origins of the social gradient in stroke incidence in different populations is limited. This study aims to estimate the burden of educational class inequalities in stroke incidence and to assess the contribution of risk factors in determining these inequalities across...... and adjudication during follow-up. Among the 126 635 middle-aged participants, initially free of cardiovascular diseases, generating 3788 first stroke events during a median follow-up of 10 years, we estimated differences in stroke rates and HRs for the least versus the most educated individuals. Results: Compared...

  16. COMPARATIVE EVALUATION OF RISK FACTORS FOR CARDIOVASCULAR DISEASE (CVD) IN GENETICALLY PREDISPOSED RATS

    Science.gov (United States)

    Rodent CVD models are increasingly used for understanding individual differences in susceptibility to environmental stressors such as air pollution. We characterized pathologies and a number of known human risk factors of CVD in genetically predisposed, male young adult Spontaneo...

  17. Performance of irradiated CVD diamond micro-strip sensors

    CERN Document Server

    Adam, W; Bergonzo, P; Bertuccio, G; Bogani, F; Borchi, E; Brambilla, A; Bruzzi, Mara; Colledani, C; Conway, J; D'Angelo, P; Dabrowski, W; Delpierre, P A; Deneuville, A; Dulinski, W; van Eijk, B; Fallou, A; Fizzotti, F; Foulon, F; Friedl, M; Gan, K K; Gheeraert, E; Hallewell, G D; Han, S; Hartjes, F G; Hrubec, Josef; Husson, D; Kagan, H; Kania, D R; Kaplon, J; Kass, R; Koeth, T W; Krammer, Manfred; Lo Giudice, A; Lü, R; MacLynne, L; Manfredotti, C; Meier, D; Mishina, M; Moroni, L; Noomen, J; Oh, A; Pan, L S; Pernicka, Manfred; Peitz, A; Perera, L P; Pirollo, S; Procario, M; Riester, J L; Roe, S; Rousseau, L; Rudge, A; Russ, J; Sala, S; Sampietro, M; Schnetzer, S R; Sciortino, S; Stelzer, H; Stone, R; Suter, B; Tapper, R J; Tesarek, R J; Trischuk, W; Tromson, D; Vittone, E; Walsh, A M; Wedenig, R; Weilhammer, Peter; Wetstein, M; White, C; Zeuner, W; Zöller, M

    2002-01-01

    CVD diamond detectors are of interest for charged particle detection and tracking due to their high radiation tolerance. In this article we present, for the first time, beam test results from recently manufactured CVD diamond strip detectors and their behavior under low doses of electrons from a $\\beta$-source and the performance before and after intense ($>10^{15}/{\\rm cm^2}$) proton- and pion-irradiations. We find that low dose irradiations increase the signal-to-noise ratio (pumping of the signal) and slightly deteriorate the spatial resolution. Intense irradiations with protons ($2.2\\times 10^{15}~p/{\\rm cm^2}$) lowers the signal-to-noise ratio slightly. Intense irradiation with pions ($2.9\\times 10^{15}~\\pi/{\\rm cm^2}$) lowers the signal-to-noise ratio more. The spatial resolution of the diamond sensors improves after irradiations.

  18. Cold Vacuum Drying (CVD) OCRWM Loop Error Determination

    International Nuclear Information System (INIS)

    PHILIPP, B.L.

    2000-01-01

    Characterization is specifically identified by the Richland Operations Office (RL) for the Office of Civilian Radioactive Waste Management (OCRWM) of the US Department of Energy (DOE), as requiring application of the requirements in the Quality Assurance Requirements and Description (QARD) (RW-0333P DOE 1997a). Those analyses that provide information that is necessary for repository acceptance require application of the QARD. The cold vacuum drying (CVD) project identified the loops that measure, display, and record multi-canister overpack (MCO) vacuum pressure and Tempered Water (TW) temperature data as providing OCRWM data per Application of the Office of Civilian Radioactive Waste Management (OCRWM) Quality Assurance Requirements to the Hanford Spent Nuclear Fuel Project HNF-SD-SNF-RPT-007. Vacuum pressure transmitters (PT 1*08, 1*10) and TW temperature transmitters (TIT-3*05, 3*12) are used to verify drying and to determine the water content within the MCO after CVD

  19. Lack of association of plasma gamma prime (γ′) fibrinogen with incident cardiovascular disease

    Science.gov (United States)

    Appiah, Duke; Heckbert, Susan R.; Cushman, Mary; Psaty, Bruce M.; Folsom, Aaron R.

    2016-01-01

    Introduction The association of gamma prime (γ′) fibrinogen; a fibrinogen γ chain variant generated via alternative mRNA processing, with cardiovascular disease (CVD) remains equivocal. We prospectively examine the association of plasma γ′ fibrinogen with the incidence of multiple cardiovascular disease (CVD) endpoints, independent of established CVD risk factors and total fibrinogen. Materials and Methods We measured plasma γ′ fibrinogen on plasma samples collected in 1992-1993 from adults ≥ 65 years (n=3219) enrolled in the Cardiovascular Health Study, who were followed through 2013 for incident CVD events. Results and Conclusions In multivariable Cox models adjusted for traditional CVD risk factors and total fibrinogen, the hazard ratio per 1 standard deviation (10.7 mg/dl) increment of γ′ fibrinogen was 1.02 (95%CI: 0.95-1.10) for coronary heart disease; 0.88 (0.77-1.00) for ischemic stroke; 1.07 (0.87-1.32) for peripheral artery disease; 1.00 (0.92-1.08) for heart failure and 1.01 (0.92-1.10) for CVD mortality. Likewise, we failed to show a statistically significant association of γ′/total fibrinogen ratio with any CVD endpoint. These results suggest that among the elderly, γ’ fibrinogen does not add much to CVD prediction beyond traditional risk factors and total fibrinogen level. PMID:27180117

  20. Comparative study of thermoluminescent responses of diverse CVD diamonds

    Czech Academy of Sciences Publication Activity Database

    Krása, Josef; Marczewska, B.; Vorlíček, Vladimír; Olko, P.; Juha, Libor

    2007-01-01

    Roč. 16, - (2007), s. 1510-1516 ISSN 0925-9635 R&D Projects: GA MŠk 1P04LA235; GA MŠk LC510 Institutional research plan: CEZ:AV0Z10100520 Keywords : CVD diamond * thermoluminescence * read-out cycle * X-ray dosimetry Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.788, year: 2007

  1. An insight into neutron detection from polycrystalline CVD diamond films

    OpenAIRE

    Mer, C.; Pomorski, M.; Bergonzo, P.; Tromson, D.; Rebisz, M.; Domenech, T.; Vuillemin, J.C.; Foulon, F.; NESLADEK, Milos; WILLIAMS, Oliver; Jackman, R.B.

    2004-01-01

    Radiation detectors fabricated from chemical vapour deposited (CVD) diamond have now been fabricated addressing several photon and particle detectors in the frame of specific industrial applications. Regarding the nuclear industry needs, diamond-based detectors have been fabricated and this paper presents the various techniques that can be of interest for the detection of fission neutrons. The ability of diamond to withstand the high irradiation fluxes as encountered in nuclear reactors is on...

  2. Engineered CVD Diamond Coatings for Machining and Tribological Applications

    Science.gov (United States)

    Dumpala, Ravikumar; Chandran, Maneesh; Ramachandra Rao, M. S.

    2015-07-01

    Diamond is an allotropes of carbon and is unique because of its extreme hardness (~100 GPa), low friction coefficient (WC-Co) substrates were discussed with an emphasis on WC-Co grade selection, substrate pretreatment, nanocrystallinity and microcrystallinity of the coating, mechanical and tribological characteristics, coating architecture, and interfacial adhesion integrity. Engineered coating substrate architecture is essential for CVD diamond coatings to perform well under harsh and highly abrasive machining and tribological conditions.

  3. Thermoluminescent properties of CVD diamond: applications to ionising radiation dosimetry

    International Nuclear Information System (INIS)

    Petitfils, A.

    2007-09-01

    Remarkable properties of synthetic diamond (human soft tissue equivalence, chemical stability, non-toxicity) make this material suitable for medical application as thermoluminescent dosimeter (TLD). This work highlights the interest of this material as radiotherapy TLD. In the first stage of this work, we looked after thermoluminescent (TL) and dosimetric properties of polycrystalline diamond made by Chemically Vapor Deposited (CVD) synthesis. Dosimetric characteristics are satisfactory as TLD for medical application. Luminescence thermal quenching on diamond has been investigated. This phenomenon leads to a decrease of dosimetric TL peak sensitivity when the heating rate increases. The second part of this work analyses the use of synthetic diamond as TLD in radiotherapy. Dose profiles, depth dose distributions and the cartography of an electron beam obtained with our samples are in very good agreement with results from an ionisation chamber. It is clearly shown that CVD) diamond is of interest to check beams of treatment accelerators. The use of these samples in a control of treatment with Intensity Modulated Radiation Therapy underlines good response of synthetic diamond in high dose gradient areas. These results indicate that CVD diamond is a promising material for radiotherapy dosimetry. (author)

  4. Increased risk of cardiovascular disease (CVD) with age in HIV-positive men: a comparison of the D:A:D CVD risk equation and general population CVD risk equations

    NARCIS (Netherlands)

    Petoumenos, K.; Reiss, P.; Ryom, L.; Rickenbach, M.; Sabin, C. A.; El-Sadr, W.; d'Arminio Monforte, A.; Phillips, A. N.; de Wit, S.; Kirk, O.; Dabis, F.; Pradier, C.; Lundgren, J. D.; Law, M. G.; Powderly, B.; Shortman, N.; Moecklinghoff, C.; Reilly, G.; Franquet, X.; Kamara, D.; Smith, C.; Phillips, A.; Mocroft, A.; Tverland, J.; Mansfeld, M.; Nielsen, J.; Raben, D.; Brandt, R. Salbøl; Fanti, I.; Krum, E.; Hillebregt, M.; Geffard, S.; Sundström, A.; Delforge, M.; Fontas, E.; Torres, F.; McManus, H.; Wright, S.; Kjær, J.; Sjøl, A.; Meidahl, P.; Helweg- Larsen, J.; Iversen, J. Schmidt; Ross, M.; Fux, C. A.; Morlat, P.; Moranne, O.; Kesselring, A. M.; Kamara, D. A.; Weber, R.; Friis-Møller, N.; Kowalska, J.; Sabin, C.; Law, M.; Bruyand, M.; Bower, M.; Fätkenheuer, G.; Donald, A.; Grulich, A.; Zaheri, S.; Gras, L.; Prins, J. M.; Kuijpers, T. W.; Scherpbier, H. J.; van der Meer, J. T. M.; Wit, F. W. M. N.; Godfried, M. H.; van der Poll, T.; Nellen, F. J. B.; Lange, J. M. A.; Geerlings, S. E.; van Vugt, M.; Pajkrt, D.; Bos, J. C.; van der Valk, M.; Grijsen, M. L.; Wiersinga, W. J.; Goorhuis, A.; Hovius, J. W. R.; Lowe, S.; Oude Lashof, A.; Posthouwer, D.; Pronk, M. J. H.; Ammerlaan, H. S. M.; van der Ende, M. E.; de Vries-Sluijs, T. E. M. S.; Schurink, C. A. M.; Nouwen, J. L.; Verbon, A.; Rijnders, B. J. A.; van Gorp, E. C. M.; van der Feltz, M.; Driessen, G. J. A.; van, A. M. C.; Branger, J.; Haag, Den; Schippers, E. F.; van Nieuwkoop, C.; van Elzakker, E. P.; Groeneveld, P. H. P.; Bouwhuis, J. W.; Soetekouw, R.; ten Kate, R. W.; Kroon, F. P.; van Dissel, J. T.; Arend, S. M.; de Boer, M. G. J.; Jolink, H.; Vollaard, H. J. M. ter; Bauer, M. P.; den Hollander, J. G.; Pogany, K.; van Twillert, G.; Kortmann, W.; Cohen Stuart, J. W. T.; Diederen, B. M. W.; Leyten, E. M. S.; Gelinck, L. B. S.; Kootstra, G. J.; Delsing, C. E.; Brinkman, K.; Blok, W. L.; Frissen, P. H. J.; Schouten, W. E. M.; van den Berk, G. E. L.; van Kasteren, M. E. E.; Brouwer, A. E.; Veenstra, J.; Lettinga, K. D.; Mulder, J. W.; Vrouenraets, S. M. E.; Lauw, F. N.; van Goyen, N. N.; van Eeden, A.; Verhagen, D. W. M.; Sprenger, H. G.; Doedens, R.; Scholvinck, E. H.; van, S.; Bierman, W. F. W.; Koopmans, P. P.; Keuter, M.; van der Ven, A. J. A. M.; ter Hofstede, H. J. M.; Dofferhoff, A. S. M.; Warris, A.; van Crevel, R.; Hoepelman, A. I. M.; Mudrikova, T.; Schneider, M. M. E.; Ellerbroek, P. M.; Oosterheert, J. J.; Arends, J. E.; Wassenberg, M. W. M.; Barth, R. E.; van Agtmael, M. A.; Perenboom, R. M.; Claessen, F. A. P.; Bomers, M.; Peters, E. J. G.; Geelen, S. P. M.; Wolfs, T. F. W.; Bont, L. J.; Richter, C.; van der Berg, J. P.; Gisolf, E. H.; van den Berge, M.; Stegeman, A.; van Vonderen, M. G. A.; van Houte, D. P. F.; Weijer, S.; el Moussaoui, R.; Winkel, C.; Muskiet, F.; Voigt, R.; Chêne, G.; Lawson-Ayayi, S.; Thiébaut, R.; Bonnal, F.; Bonnet, F.; Bernard, N.; Caunègre, L.; Cazanave, C.; Ceccaldi, J.; Chambon, D.; Chossat, I.; Dauchy, F. A.; de Witte, S.; Dupon, M.; Duffau, P.; Dutronc, H.; Farbos, S.; Gaborieau, V.; Gemain, M. C.; Gerard, Y.; Greib, C.; Hessamfar, M.; Lacoste, D.; Lataste, P.; Lafarie, S.; Lazaro, E.; Malvy, D.; Meraud, J. P.; Mercié, P.; Monlun, E.; Neau, D.; Ochoa, A.; Pellegrin, J. L.; Pistone, T.; Ragnaud, J. M.; Receveur, M. C.; Tchamgoué, S.; Vandenhende, M. A.; Viallard, J. F.; Moreau, J. F.; Pellegrin, I.; Fleury, H.; Lafon, M. E.; Masquelier, B.; Trimoulet, P.; Breilh, D.; Haramburu, F.; Miremont-Salamé, G.; Blaizeau, M. J.; Decoin, M.; Delaune, J.; Delveaux, S.; D'Ivernois, C.; Hanapier, C.; Leleux, O.; Uwamaliya-Nziyumvira, B.; Sicard, X.; Palmer, G.; Touchard, D.; Bendall, C.; Moore, R.; Edwards, S.; Hoy, J.; Watson, K.; Roth, N.; Nicholson, J.; Bloch, M.; Franic, T.; Baker, D.; Vale, R.; Carr, A.; Cooper, D.; Chuah, J.; Ngieng, M.; Nolan, D.; Skett, J.; Calvo, G.; Mateu, S.; Domingo, P.; A, M.; Gatell, J.; del Cacho, E.; Cadafalch, J.; Fuster, M.; Codina, C.; Sirera, G.; Vaqué, A.; Clumeck, N.; Necsoi, C.; Gennotte, A. F.; Gerard, M.; Kabeya, K.; Konopnicki, D.; Libois, A.; Martin, C.; Payen, M. C.; Semaille, P.; van Laethem, Y.; Neaton, J.; Bartsch, G.; El-Sadr, W. M.; Thompson, G.; Wentworth, D.; Luskin-Hawk, R.; Telzak, E.; Abrams, D. I.; Cohn, D.; Markowitz, N.; Arduino, R.; Mushatt, D.; Friedland, G.; Perez, G.; Tedaldi, E.; Fisher, E.; Gordin, F.; Crane, L. R.; Sampson, J.; Baxter, J.; Lundgren, J.; Cozzi-Lepri, A.; Grint, D.; Podlekareva, D.; Peters, L.; Reekie, J.; Fischer, A. H.; Losso, M.; Elias, C.; Ramos, J. M.; Vetter, N.; Zangerle, R.; Karpov, I.; Vassilenko, A.; Mitsura, V. M.; Suetnov, O.; Colebunders, R.; Vandekerckhove, L.; Hadziosmanovic, V.; Kostov, K.; Begovac, J.; Machala, L.; Jilich, D.; Sedlacek, D.; Kronborg, G.; Benfield, T.; Larsen, M.; Gerstoft, J.; Katzenstein, T.; Hansen, A. -B. E.; Skinhøj, P.; Pedersen, C.; Ostergaard, L.; Zilmer, K.; Smidt, J.; Ristola, M.; Katlama, C.; Viard, J. -P.; Girard, P. -M.; Livrozet, J. M.; Vanhems, P.; Bernard, Claude; Rockstroh, J.; Schmidt, R.; van Lunzen, J.; Degen, O.; Stellbrink, H. J.; Staszewski, S.; Goethe, J. W.; Bickel, M.; Kosmidis, J.; Gargalianos, P.; Xylomenos, G.; Perdios, J.; Panos, G.; Filandras, A.; Karabatsaki, E.; Sambatakou, H.; Banhegyi, D.; Mulcahy, F.; Yust, I.; Turner, D.; Burke, M.; Pollack, S.; Hassoun, G.; Maayan, S.; Vella, S.; Esposito, R.; Mazeu, I.; Mussini, C.; Arici, C.; Pristera, R.; Mazzotta, F.; Gabbuti, A.; Vullo, V.; Lichtner, M.; Chirianni, A.; Montesarchio, E.; Gargiulo, M.; Cotugno, A. D.; Antonucci, G.; Testa, A.; Narciso, P.; Vlassi, C.; Zaccarelli, M.; Lazzarin, A.; Castagna, A.; Gianotti, N.; Galli, M.; Ridolfo, A.; Sacco, L.; Rozentale, B.; Zeltina, I.; Chaplinskas, S.; Hemmer, R.; Staub, T.; Ormaasen, V.; Maeland, A.; Bruun, J.; Knysz, B.; Gasiorowski, J.; Horban, A.; Bakowska, E.; Grzeszczuk, A.; Flisiak, R.; Boron- Kaczmarska, A.; Pynka, M.; Parczewski, M.; Beniowski, M.; Mularska, E.; Trocha, H.; Jablonowska, E.; Malolepsza, E.; Wojcik, K.; Antunes, F.; Doroana, M.; Caldeira, L.; Mansinho, K.; Maltez, F.; Duiculescu, D.; Rakhmanova, A.; Zakharova, N.; Buzunova, S.; Jevtovic, D.; Mokráš, M.; Staneková, D.; Tomazic, J.; González-Lahoz, J.; Soriano, V.; Labarga, P.; Medrano, J.; Moreno, S.; Rodriguez, J. M.; Clotet, B.; Jou, A.; Paredes, R.; Tural, C.; Puig, J.; Bravo, I.; Gatell, J. M.; M, J.; Gutierrez, M.; Mateo, G.; Sambeat, M. A.; Karlsson, A.; Flamholc, L.; Ledergerber, B.; Francioli, P.; Cavassini, M.; Hirschel, B.; Boffi, E.; Furrer, H.; Battegay, M.; Elzi, L.; Kravchenko, E.; Chentsova, N.; Frolov, V.; Kutsyna, G.; Servitskiy, S.; Krasnov, M.; Barton, S.; Johnson, A. M.; Mercey, D.; Johnson, M. A.; Murphy, M.; Weber, J.; Scullard, G.; Fisher, M.; Leen, C.; Morfeldt, L.; Thulin, G.; Åkerlund, B.; Koppel, K.; Håkangård, C.; Moroni, M.; Angarano, G.; Antinori, A.; Armignacco, O.; Castelli, F.; Cauda, R.; Di Perri, G.; Iardino, R.; Ippolito, G.; Perno, C. F.; von Schloesser, F.; Viale, P.; Ceccherini-Silberstein, F.; Girardi, E.; Lo Caputo, S.; Puoti, M.; Andreoni, M.; Ammassari, A.; d'rminio Monforte, A.; Balotta, C.; Bonfanti, P.; Bonora, S.; Borderi, M.; Capobianchi, M. R.; Cingolani, A.; Cinque, P.; de Luca, A.; Di Biagio, A.; Gori, A.; Guaraldi, G.; Lapadula, G.; Caputo, S. Lo; Madeddu, G.; Maggiolo, F.; Marchetti, G.; Marcotullio, S.; Monno, L.; Roldan, E. Quiros; Rusconi, S.; Cicconi, P.; Formenti, T.; Galli, L.; Lorenzini, P.; Giacometti, A.; Costantini, A.; Santoro, C.; Suardi, C.; Vanino, E.; Verucchi, G.; Quiros Roldan, E.; Minardi, C.; Quirino, T.; Abeli, C.; Manconi, P. E.; Piano, P.; Vecchiet, J.; Falasca, K.; Sighinolfi, L.; Segala, D.; Cassola, G.; Viscoli, G.; Alessandrini, A.; Piscopo, R.; Mazzarello, G.; Mastroianni, C.; Belvisi, V.; Caramma, I.; Castelli, A. P.; Rizzardini, G.; Ridolfo, A. L.; Piolini, R.; Salpietro, S.; Carenzi, L.; Moioli, M. C.; Puzzolante, C.; Abrescia, N.; Guida, M. G.; Onofrio, M.; Baldelli, F.; Francisci, D.; Parruti, G.; Ursini, T.; Magnani, G.; Ursitti, M. A.; d'Avino, A.; Gallo, L.; Nicastri, E.; Acinapura, R.; Capozzi, M.; Libertone, R.; Tebano, G.; Cattelan, A.; Mura, M. S.; Caramello, P.; Orofino, G. C.; Sciandra, M.; Pellizzer, G.; Manfrin, V.; Caissotti, C.; Dellamonica, P.; Bernard, E.; Cua, E.; de Salvador-Guillouet, F.; Durant, J.; Ferrando, S.; Mondain-Miton, V.; Naqvi, A.; Perbost, I.; Prouvost-Keller, B.; Pillet, S.; Pugliese, P.; Rahelinirina, V.; Roger, P. M.; Dollet, K.; Aubert, V.; Barth, J.; Bernasconi, E.; Böni, J.; Bucher, H. C.; Burton-Jeangros, C.; Calmy, A.; Egger, M.; Fehr, J.; Fellay, J.; Gorgievski, M.; Günthard, H.; Haerry, D.; Hasse, B.; Hirsch, H. H.; Hösli, I.; Kahlert, C.; Kaiser, L.; Keiser, O.; Klimkait, T.; Kovari, H.; Martinetti, G.; de Tejada, B. Martinez; Metzner, K.; Müller, N.; Nadal, D.; Pantaleo, G.; Rauch, A.; Regenass, S.; Rudin, C.; Schmid, P.; Schultze, D.; Schöni-Affolter, F.; Schüpbach, J.; Speck, R.; Taffé, P.; Tarr, P.; Telenti, A.; Trkola, A.; Vernazza, P.; Yerly, S.

    2014-01-01

    The aim of the study was to statistically model the relative increased risk of cardiovascular disease (CVD) per year older in Data collection on Adverse events of anti-HIV Drugs (D:A:D) and to compare this with the relative increased risk of CVD per year older in general population risk equations.

  5. A registry-based follow-up study, comparing the incidence of cardiovascular disease in native Danes and immigrants born in Turkey, Pakistan and the former Yugoslavia: do social inequalities play a role?

    DEFF Research Database (Denmark)

    Hempler, Nana F; Larsen, Finn; Nielsen, Signe S

    2011-01-01

    ), such as employment, income and housing conditions influenced potential differences. METHODS: In this registry-based follow-up study individuals were identified in a large database that included individuals from two major regions in Denmark, corresponding to about 60% of the Danish population. Incident cases of CVD......, differences in CVD and AMI were reduced after adjustment for SES, in particular, among Turks regarding CVD. In women, effects were particularly reduced among Yugoslavians in the case of CVD and in Turks in the case of CVD and AMI after adjustment for SES. CONCLUSIONS: In conclusion, country of birth...

  6. Nucleation of microwave plasma CVD diamond on molybdenum (Mo) substrate

    International Nuclear Information System (INIS)

    Inderjeet, K.; Ramesh, S.

    2000-01-01

    Molybdenum is a metal, which is gaining increasing significance in industrial applications. The main use of Mo is as all alloying element added in small amounts to steel, irons and non- ferrous alloys in order to enhance the strength, toughness and wear resistance. Mo is also vastly being employed in the automotive and aircraft industries, mainly due to its low coefficient of friction. Diamond, on be other hand, is a unique material for innumerable applications because of its usual combination of physical and chemical properties. Several potential applications can be anticipated for diamond in many sectors including electronics, optics, as protective corrosion resistant coatings, cutting tools, etc. With the enhancement in science and technology, diamond microcrystals and thin films are now being produced from the vapour phase by a variety of chemical vapour deposition (CVD) techniques; such as microwave plasma CVD. With such technology being made available, it is envisage that diamond-coated molybdenum would further enhance the performance and to open up new avenue for Mo in various industries. Therefore, it is the aim of the present work to study the nucleation and growth of diamond particles on Mo surface by employing microwave plasma CVD (MAPCVD). In the present work, diamond deposition was carried out in several stages by varying the deposition distance. The nucleation and growth rate were studied using scanning electron microscopy (SEM). In addition, the existence of diamond was verified by X-ray diffraction (XRD) analysis. It has been found that the nucleation and growth rate of diamond particles were influenced by the deposition height between the substrate and plasma. Under the optimum condition, well defined diamond crystallites distributed homogeneously throughout the surface, could be obtained. Some of the important parameters controlling the deposition and growth of diamond particles on Mo surface are discussed. (author)

  7. Epigenetic modifications and human pathologies: cancer and CVD.

    Science.gov (United States)

    Duthie, Susan J

    2011-02-01

    Epigenetic changes are inherited alterations in DNA that affect gene expression and function without altering the DNA sequence. DNA methylation is one epigenetic process implicated in human disease that is influenced by diet. DNA methylation involves addition of a 1-C moiety to cytosine groups in DNA. Methylated genes are not transcribed or are transcribed at a reduced rate. Global under-methylation (hypomethylation) and site-specific over-methylation (hypermethylation) are common features of human tumours. DNA hypomethylation, leading to increased expression of specific proto-oncogenes (e.g. genes involved in proliferation or metastasis) can increase the risk of cancer as can hypermethylation and reduced expression of tumour suppressor (TS) genes (e.g. DNA repair genes). DNA methyltransferases (DNMT), together with the methyl donor S-adenosylmethionine (SAM), facilitate DNA methylation. Abnormal DNA methylation is implicated not only in the development of human cancer but also in CVD. Polyphenols, a group of phytochemicals consumed in significant amounts in the human diet, effect risk of cancer. Flavonoids from tea, soft fruits and soya are potent inhibitors of DNMT in vitro, capable of reversing hypermethylation and reactivating TS genes. Folates, a group of water-soluble B vitamins found in high concentration in green leafy vegetables, regulate DNA methylation through their ability to generate SAM. People who habitually consume the lowest level of folate or with the lowest blood folate concentrations have a significantly increased risk of developing several cancers and CVD. This review describes how flavonoids and folates in the human diet alter DNA methylation and may modify the risk of human colon cancer and CVD.

  8. Selective, pulsed CVD of platinum on microfilament gas sensors

    Energy Technology Data Exchange (ETDEWEB)

    Manginell, R.P.; Smith, J.H.; Ricco, A.J.; Moreno, D.J.; Hughes, R.C. [Sandia National Labs., Albuquerque, NM (United States); Huber, R.J. [Utah Univ., Salt Lake City, UT (United States); Senturia, S.D. [Massachusetts Inst. of Tech., Cambridge, MA (United States)

    1996-05-01

    A post-processing, selective micro-chemical vapor deposition (``micro-CVD``) technology for the deposition of catalytic films on surface-micromachined, nitride-passivated polysilicon filaments has been investigated. Atmospheric pressure deposition of Pt on microfilaments was accomplished by thermal decomposition of Pt acetylacetonate; deposition occurs selectively only on those filaments which are electrically heated. Catalyst morphology, characterized by SEM, can be controlled by altering deposition time, filament temperature, and through the use of pulsed heating of the filament during deposition. Morphology plays an important role in determining the sensitivity of these devices when used as combustible gas sensors.

  9. CVD Graphene/Ni Interface Evolution in Sulfuric Electrolyte

    DEFF Research Database (Denmark)

    Yivlialin, Rossella; Bussetti, Gianlorenzo; Duò, Lamberto

    2018-01-01

    Systems comprising single and multilayer graphene deposited on metals and immersed in acid environments have been investigated, with the aim of elucidating the mechanisms involved, for instance, in hydrogen production or metal protection from corrosion. In this work, a relevant system, namely...... chemical vapor deposited (CVD) multilayer graphene/Ni (MLGr/Ni), is studied when immersed in a diluted sulfuric electrolyte. The MLGr/Ni electrochemical and morphological properties are studied in situ and interpreted in light of the highly oriented pyrolytic graphite (HOPG) electrode behavior, when...... immersed in the same electrolyte. Following this interpretative framework, the dominant role of the Ni substrate in hydrogen production is clarified....

  10. Ultratough CVD single crystal diamond and three dimensional growth thereof

    Science.gov (United States)

    Hemley, Russell J [Washington, DC; Mao, Ho-kwang [Washington, DC; Yan, Chih-shiue [Washington, DC

    2009-09-29

    The invention relates to a single-crystal diamond grown by microwave plasma chemical vapor deposition that has a toughness of at least about 30 MPa m.sup.1/2. The invention also relates to a method of producing a single-crystal diamond with a toughness of at least about 30 MPa m.sup.1/2. The invention further relates to a process for producing a single crystal CVD diamond in three dimensions on a single crystal diamond substrate.

  11. CVD diamond sensor for UV-photon detection

    CERN Document Server

    Periale, L; Gervino, G; Lamarina, A M; Palmisano, C; Periale, R; Picchi, P

    2012-01-01

    A new generation of UV photosensors, based on single crystal Chemical Vapour Deposition (CVD) diamonds to work optically coupled with large volume two-phase liquid-Ar (LAr) or liquid-Xe (LXe) detectors nowadays under design for the next generation of WIMPs experiments, is under development. Preliminary tests and first calibrations show these devices can have better performance than the existing UV sensitive detectors (higher photosensitivity and better signal-to-noise ratio). I-V characteristics, dark current measurements, linearity response to X-ray irradiation, and alpha-particle energy resolution are reported and discussed. (C) 2011 Elsevier B.V. All rights reserved.

  12. Gravitational and thermal effects in CVD flow and deposition

    Science.gov (United States)

    Clark, I. O.; Black, L. R.; Johnson, E. J.; Hyer, P. V.; Gerdes, W. K.; Culotta, P. W.; Jesser, W. A.; Kui, J.

    1992-01-01

    A three-phased approach is used to investigate the transport phenomena occurring in horizontal CVD reactors. The three phases are made up of laser velocimetry experimental investigations, numerical CFD modeling, and metal-organic chemical vapor deposition experimental studies. Laser velocimetry measurements of flow in a horizontal reactor with a cylindrical flow channel and tilted susceptor demonstrate velocity components arising from thermal expansion and buoyancy effects that significantly exceed the velocity components due to the external applied flow. MOCVD of InP and GaAs thin films in a horizontal reactor channel with a rectangular cross section and a tilted susceptor has also been examined.

  13. Improved CVD Techniques for Depositing Passivation Layers of ICs

    Science.gov (United States)

    1975-10-01

    Gases. ... 216 Effects of Substrate Surface . . . . . . eco . yt . . . . . 216 Applicability of Results to Other CVD Reco ytms .. . 216 Post-Deposition...October 11, - eCo .,1,Nolp.4,ardNok, ZE6 1970). 193) 363. D. S. Zoroglu and L. E. Cak EE~rf5 358, Staff Article, "How Phosphorus Abets IC Destruc- Eeto...lmghthroghpt, b sipleIn these reactors, thke substrate wafers are placed and qafv to operate, and easy to maintainl. Tile captal cst o theo lkptlnt

  14. Stress analysis of CVD diamond window for ECH system

    International Nuclear Information System (INIS)

    Takahashi, Koji

    2001-03-01

    The stress analysis of a chemical vapor deposition (CVD) diamond window for Electron Cyclotron Heating and Current Drive (ECH/ECCD) system of fusion reactors is described. It was found that the real size diamond window (φ aper =70mm, t=2.25mm) withstood 14.5 atm. (1.45 MPa). The calculation results of the diamond window by ABAQUS code agree well with the results of the pressure test. The design parameters of the torus diamond window for a vacuum and a safety barrier were also obtained. (author)

  15. Organic solar cells using CVD-grown graphene electrodes

    Science.gov (United States)

    Kim, Hobeom; Bae, Sang-Hoon; Han, Tae-Hee; Lim, Kyung-Geun; Ahn, Jong-Hyun; Lee, Tae-Woo

    2014-01-01

    We report on the development of flexible organic solar cells (OSCs) incorporating graphene sheets synthesized by chemical vapor deposition (CVD) as transparent conducting electrodes on polyethylene terephthalate (PET) substrates. A key barrier that must be overcome for the successful fabrication of OSCs with graphene electrodes is the poor-film properties of water-based poly(3,4-ethylenedioxythiphene):poly(styrenesulfonate) (PEDOT:PSS) when coated onto hydrophobic graphene surfaces. To form a uniform PEDOT:PSS film on a graphene surface, we added perfluorinated ionomers (PFI) to pristine PEDOT:PSS to create ‘GraHEL’, which we then successfully spin coated onto the graphene surface. We systematically investigated the effect of number of layers in layer-by-layer stacked graphene anode of an OSC on the performance parameters including the open-circuit voltage (Voc), short-circuit current (Jsc), and fill factor (FF). As the number of graphene layers increased, the FF tended to increase owing to lower sheet resistance, while Jsc tended to decrease owing to the lower light absorption. In light of this trade-off between sheet resistance and transmittance, we determined that three-layer graphene (3LG) represents the best configuration for obtaining the optimal power conversion efficiency (PCE) in OSC anodes, even at suboptimal sheet resistances. We finally developed efficient, flexible OSCs with a PCE of 4.33%, which is the highest efficiency attained so far by an OSC with CVD-grown graphene electrodes to the best of our knowledge.

  16. Thermoluminescence in CVD diamond films: application to actinometric dosimetry

    International Nuclear Information System (INIS)

    Barboza-Flores, M.; Melendrez, R.; Chernov, V.; Castaneda, B.; Pedroza-Montero, M.; Gan, B.; Ahn, J.; Zhang, Q.; Yoon, S.F.

    2002-01-01

    Diamond is considered a tissue-equivalent material since its atomic number (Z=6) is close to the effective atomic number of biological tissue (Z=7.42). Such a situation makes it suitable for radiation detection purposes in medical applications. In the present work the analysis is reported of the thermoluminescence (TL) and dosimetric features of chemically vapour deposited (CVD) diamond film samples subjected to ultraviolet (UV) irradiation in the actinometric region. The TL glow curve shows peaks at 120, 220, 320 and 370 deg. C. The 120 and 370 deg. C peaks are too weak and the first one fades away in a few seconds after exposure. The overall room temperature fading shows a 50% TL decay 30 min after exposure. The 320 deg. C glow peak is considered to be the most adequate for dosimetric applications due to its low fading and linear TL behaviour as a function of UV dose in the 180-260 nm range. The TL excitation spectrum presents a broad band with at least two overlapped components around 205 and 220 nm. The results indicate that the TL behaviour of CVD diamond film can be a good alternative to the currently available dosemeter and detector in the actinometric region as well as in clinical and medical applications. (author)

  17. Management of Hypertension and Other CVD Risk Factors in Egypt

    Directory of Open Access Journals (Sweden)

    Mostafa A. Abolfotouh

    2011-01-01

    Full Text Available Aim. To assess the knowledge and practice of PHC physicians toward the detection and management of hypertension (HTN and other CVD risk factors. Methods. A cross-sectional study of all primary health care physicians of the FHU of three rural districts of Egypt was conducted. Each physician was subjected to a prevalidated interview questionnaire on the WHO-CVD risk management package for low and medium resources, and a checklist of observation of daily practices. Results. Hypertension was a priority problem in about two-thirds (62.9% of physicians, yet only 19% have guidelines for HTN patients. Clinical history recording system for HNT was available for 50% of physicians. Levels of knowledge varied with regard to definition of HTN (61.3%, fair, procedures for BP measurement (43.5%, poor, indications for referral (43.5%, poor, patient counseling (61.3%, fair, patient treatment (59.8%, fair. Availability of clinical history recording system for HNT was a significant predictor for physician's level of knowledge (P=0.001. Overall level of practice was fair (68.5%. Conclusion. PHC physicians have unsatisfactory knowledge and practice on hypertension. There is a need of more continuing medical education. Local and international manuals, workshops, and seminars on how to make use of these guidelines would improve doctors' performance.

  18. Mobility enhancement of CVD graphene by spatially correlated charges

    Science.gov (United States)

    Turyanska, Lyudmila; Makarovsky, Oleg; Eaves, Laurence; Patanè, Amalia; Mori, Nobuya

    2017-06-01

    We present a strategy for enhancing the carrier mobility of single layer CVD graphene (CVD SLG) based on spatially correlated charges. Our Monte Carlo simulations, numerical modeling and the experimental results confirm that spatial correlation between defects with opposite charges can provide a means to control independently the carrier concentration and mobility of planar field effect transistors in which graphene is decorated with a layer of colloidal quantum dots (QDs). We show that the spatial correlation between electrically charged scattering centres close to the graphene/SiO2 interface and the localised charges in a QD layer can smooth out the electrostatic potential landscape, thus reducing scattering and enhancing the carrier mobility. The QD capping molecules influence the distribution and correlation of electrical charges in the vicinity of SLG and provide a means of tuning the carrier concentration and increasing the carrier mobility in graphene. These results represent a significant conceptual advance and provide a novel strategy for control of the electronic properties of 2D materials that could accelerate their utilization in optoelectronic devices.

  19. Oxide Dispersion Strengthened Iron Aluminide by CVD Coated Powders

    Energy Technology Data Exchange (ETDEWEB)

    Asit Biswas Andrew J. Sherman

    2006-09-25

    This I &I Category2 program developed chemical vapor deposition (CVD) of iron, aluminum and aluminum oxide coated iron powders and the availability of high temperature oxidation, corrosion and erosion resistant coating for future power generation equipment and can be used for retrofitting existing fossil-fired power plant equipment. This coating will provide enhanced life and performance of Coal-Fired Boilers components such as fire side corrosion on the outer diameter (OD) of the water wall and superheater tubing as well as on the inner diameter (ID) and OD of larger diameter headers. The program also developed a manufacturing route for readily available thermal spray powders for iron aluminide coating and fabrication of net shape component by powder metallurgy route using this CVD coated powders. This coating can also be applid on jet engine compressor blade and housing, industrial heat treating furnace fixtures, magnetic electronic parts, heating element, piping and tubing for fossil energy application and automotive application, chemical processing equipment , heat exchanger, and structural member of aircraft. The program also resulted in developing a new fabrication route of thermal spray coating and oxide dispersion strengthened (ODS) iron aluminide composites enabling more precise control over material microstructures.

  20. A study of the thermoluminescent properties of CVD diamond detectors

    International Nuclear Information System (INIS)

    Marczewska, B.; Bilski, P.; Olko, P.; Rebisz, M.; Nesladek, M.; Waligorski, M.P.R.

    2002-01-01

    A batch of 20 diamond detectors obtained by the chemical vapour deposition (CVD) method at the Institute for Materials Research at the Limburg University, Belgium, was investigated with respect to their thermoluminescent (TL) properties. The investigated detectors demonstrate TL sensitivity similar to that of the standard LiF:Mg, Ti (MTS) thermoluminescent detectors, lack of fading after two weeks from irradiation and apparent linearity of dose response. In spite of the persistent fluctuation of individual detector sensitivity observed in this batch, a new annealing procedure improved the stability of the TL signal. It has been concluded that 1 h annealing at 350 C assures the highest reproducibility for this set of detectors. A 30% discrepancy of the value of the TL signal between individual detectors from the batch may be caused by non-uniform distribution of dopants in the volume of the CVD diamond. A prototype of a planar TL reader equipped with a CCD camera was employed in this investigation. (Abstract Copyright [2002], Wiley Periodicals, Inc.)

  1. Incident Cardiovascular Disease Among Adults With Blood Pressure Hg.

    Science.gov (United States)

    Tajeu, Gabriel S; Booth, John N; Colantonio, Lisandro D; Gottesman, Rebecca F; Howard, George; Lackland, Daniel T; O'Brien, Emily C; Oparil, Suzanne; Ravenell, Joseph; Safford, Monika M; Seals, Samantha R; Shimbo, Daichi; Shea, Steven; Spruill, Tanya M; Tanner, Rikki M; Muntner, Paul

    2017-08-29

    Data from before the 2000s indicate that the majority of incident cardiovascular disease (CVD) events occur among US adults with systolic and diastolic blood pressure (SBP/DBP) ≥140/90 mm Hg. Over the past several decades, BP has declined and hypertension control has improved. We estimated the percentage of incident CVD events that occur at SBP/DBP Hg in a pooled analysis of 3 contemporary US cohorts: the REGARDS study (Reasons for Geographic and Racial Differences in Stroke), the MESA (Multi-Ethnic Study of Atherosclerosis), and the JHS (Jackson Heart Study) (n=31 856; REGARDS=21 208; MESA=6779; JHS=3869). Baseline study visits were conducted in 2003 to 2007 for REGARDS, 2000 to 2002 for MESA, and 2000 to 2004 for JHS. BP was measured by trained staff using standardized methods. Antihypertensive medication use was self-reported. The primary outcome was incident CVD, defined by the first occurrence of fatal or nonfatal stroke, nonfatal myocardial infarction, fatal coronary heart disease, or heart failure. Events were adjudicated in each study. Over a mean follow-up of 7.7 years, 2584 participants had incident CVD events. Overall, 63.0% (95% confidence interval [CI], 54.9-71.1) of events occurred in participants with SBP/DBP Hg; 58.4% (95% CI, 47.7-69.2) and 68.1% (95% CI, 60.1-76.0) among those taking and not taking antihypertensive medication, respectively. The majority of events occurred in participants with SBP/DBP Hg among those Hg, 76.6% (95% CI, 75.8-77.5) were eligible for statin treatment, but only 33.2% (95% CI, 32.1-34.3) were taking one, and 19.5% (95% CI, 18.5-20.5) met the SPRINT (Systolic Blood Pressure Intervention Trial) eligibility criteria and may benefit from a SBP target goal of 120 mm Hg. Although higher BP levels are associated with increased CVD risk, in the modern era, the majority of incident CVD events occur in US adults with SBP/DBP Hg. While absolute risk and cost-effectiveness should be considered, additional CVD risk

  2. Preparation and process optimization of high T{sub c} superconducting films by CVD using halides and aerosol CVD process. Final report; Herstellung und Prozessoptimierung von CVD-HTSL-Schichten ausgehend von Halogeniden und einem Aerosol-CVD-Prozess. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Selbmann, D.; Balarin, M.; Klosowski, J.

    1995-12-12

    The application of High Tc superconductors in the electroenergy technique requires flexibel superconducting tapes with critical current density above 10{sup 5} A/cm{sup 2} (77 K, 0 T), produced with economically acceptable costs. A suitable preparation process can be the aerosol CVD (ACVD) starting with liquid initial sources. Using this method the advantages of the CVD are connected with low expensive equipments and with a good reproducibility of the results. Using the ACVD for the deposition of YBa{sub 2}Cu{sub 3}O{sub 7-x} layers the applicability of halides as starting precursors and the most important process parameters are investigated. The deposition of bromide-free YBCO layers is possible only at evaporation and reaction temperatures above 880 C and 910 C respectively and at pressures between 20 and 40 mbar. The bromides of Y, Ba, and Cu are dissolved in diethylene glycol monoethyl ether in the molar ratio Y:Ba:Cu=1:8:36. The layers are c-axis oriented, but they are not free of other phases (Y{sub 2}O{sub 3}, CuO, BaCuO{sub 2}, Y{sub 2}BaCuO{sub 5}, about 10-20%) and have a wide transition range (10 K) to the superconducting state at temperatures of 90 K. In summary, the halides are not alternative precursors opposite to organometallic compounds. (orig.) [Deutsch] Die Anwendung der HTSL in der Elektroenergietechnik erfordert flexible supraleitende Baender mit kritischen Stromdichten ueber 10{sup 5} A/cm{sup 2} (77 K, 0 T), die sich mit oekonomisch vertretbaren Kosten herstellen lassen. Ein geeigneter Herstellungsprozess koennte das Aerosol CVD-Verfahren sein, das Loesungen als Ausgangsvorrat verwendet. Das A-CVD vereinigt die Vorteile des CVD mit niedrigen Ausruestungskosten und gute Reproduzierbarkeit der Schichtabscheidung. Mit Hilfe des Aerosolverfahrens wurde die Eignung der Halogenide fuer die Abscheidung von YBa{sub 2}Cu{sub 3}O{sub 7-x}-Schichten sowie die wichtigsten Prozessstufen des Verfahrens untersucht. Die Abscheidung von bromidfreien YBCO

  3. The mediating role of cardiovascular risk factors in the relationship between symptoms of apathy and incident cardiovascular disease in community-dwelling older individuals

    NARCIS (Netherlands)

    Eurelings, Lisa S. M.; Jaccard, James; Moll van Charante, Eric P.; Eikelenboom, Piet; Ligthart, Suzanne A.; van Gool, Willem A.; Richard, Edo

    2016-01-01

    In old age, both apathy and depression have been associated with an increased cardiovascular disease (CVD) risk. This study evaluated the mediating role of cardiovascular risk factors in the relationship of apathy and mood symptoms with incident CVD. Prospective cohort study of 1,790

  4. Dietary Patterns in Relation to Cardiovascular Disease Incidence and Risk Markers in a Middle-Aged British Male Population: Data from the Caerphilly Prospective Study

    NARCIS (Netherlands)

    Mertens, Elly; Markey, Oonagh; Geleijnse, Johanna; Givens, David; Lovegrove, Julie

    2017-01-01

    Dietary behaviour is an important modifiable factor in cardiovascular disease (CVD) prevention. The study aimed to identify dietary patterns (DPs) and explore their association with CVD incidence and risk markers. A follow-up of 1838 middle-aged men, aged 47–67 years recruited into the Caerphilly

  5. A directly patternable click-active polymer film via initiated chemical vapor deposition (iCVD)

    International Nuclear Information System (INIS)

    Im, Sung Gap; Kim, Byeong-Su; Tenhaeff, Wyatt E.; Hammond, Paula T.; Gleason, Karen K.

    2009-01-01

    A new 'click chemistry' active functional polymer film was directly obtained from a commercially available monomer of propargyl acrylate (PA) via easy, one-step process of initiated chemical vapor deposition (iCVD). Fourier transform infrared (FTIR) spectra confirmed that significant amount of the click-active acetylene functional group was retained after the iCVD process. The degree of crosslinking could be controlled by intentionally adding crosslinker, such as ethylene glycol diacrylate (EGDA) that was polymerized with PA to form click-active, completely insoluble copolymer. The formed iCVD polymers could also be grafted on various inorganic substrates with silane coupling agents. These crosslinking and grafting techniques give iCVD polymers chemical and mechanical stability, which allows iCVD polymers applicable to various click chemistry without any modification of reaction conditions. Pre-patterned iCVD polymer could be obtained via photolithography and an azido-functionalized dye molecule was also successfully attached on iCVD polymer via click chemistry. Moreover, pPA film demonstrated sensitivity to e-beam irradiation, which enabled clickable substrates having nanometer scale patterns without requiring the use of an additional e-beam resist. Direct e-beam exposure of this multifunctional iCVD layer, a 200 nm pattern, and QD particles were selectively conjugated on the substrates via click chemistry. Thus, iCVD pPA has shown dual functionality as of 'clickable' e-beam sensitive material.

  6. Proximal aortic distensibility is an independent predictor of all-cause mortality and incident CV events: the MESA study.

    Science.gov (United States)

    Redheuil, Alban; Wu, Colin O; Kachenoura, Nadjia; Ohyama, Yoshiaki; Yan, Raymond T; Bertoni, Alain G; Hundley, Gregory W; Duprez, Daniel A; Jacobs, David R; Daniels, Lori B; Darwin, Christine; Sibley, Christopher; Bluemke, David A; Lima, João A C

    2014-12-23

    The predictive value of ascending aortic distensibility (AAD) for mortality and hard cardiovascular disease (CVD) events has not been fully established. This study sought to assess the utility of AAD to predict mortality and incident CVD events beyond conventional risk factors in MESA (Multi-Ethnic Study of Atherosclerosis). AAD was measured with magnetic resonance imaging at baseline in 3,675 MESA participants free of overt CVD. Cox proportional hazards regression was used to evaluate risk of death, heart failure (HF), and incident CVD in relation to AAD, CVD risk factors, indexes of subclinical atherosclerosis, and Framingham risk score. There were 246 deaths, 171 hard CVD events (myocardial infarction, resuscitated cardiac arrest, stroke and CV death), and 88 HF events over a median 8.5-year follow-up. Decreased AAD was associated with increased all-cause mortality with a hazard ratio (HR) for the first versus fifth quintile of AAD of 2.7 (p = 0.008) independent of age, sex, ethnicity, other CVD risk factors, and indexes of subclinical atherosclerosis. Overall, patients with the lowest AAD had an independent 2-fold higher risk of hard CVD events. Decreased AAD was associated with CV events in low to intermediate- CVD risk individuals with an HR for the first quintile of AAD of 5.3 (p = 0.03) as well as with incident HF but not after full adjustment. Decreased proximal aorta distensibility significantly predicted all-cause mortality and hard CV events among individuals without overt CVD. AAD may help refine risk stratification, especially among asymptomatic, low- to intermediate-risk individuals. Copyright © 2014 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  7. Crescimento de grafeno por CVD em folhas de cobre

    OpenAIRE

    Ingrid David Barcelos

    2011-01-01

    Nesse trabalho estamos interessados em estabelecer uma condição de crescimento de Grafeno por CVD (deposição química na fase vapor) em folhas de Cobre, utilizando alta concentração de metano em pressão atmosférica. Para isso, iniciamos um estudo sobre o crescimento que vai desde o tratamento térmico do substrato até a obtenção de um lme de grafeno de grande área e boa qualidade. Esse lmes foram caracterizados por espectroscopia Raman, e UV-VIS, e microscopia óptica. Análises dos espectros Ram...

  8. Dimensionless Numbers Expressed in Terms of Common CVD Process Parameters

    Science.gov (United States)

    Kuczmarski, Maria A.

    1999-01-01

    A variety of dimensionless numbers related to momentum and heat transfer are useful in Chemical Vapor Deposition (CVD) analysis. These numbers are not traditionally calculated by directly using reactor operating parameters, such as temperature and pressure. In this paper, these numbers have been expressed in a form that explicitly shows their dependence upon the carrier gas, reactor geometry, and reactor operation conditions. These expressions were derived for both monatomic and diatomic gases using estimation techniques for viscosity, thermal conductivity, and heat capacity. Values calculated from these expressions compared well to previously published values. These expressions provide a relatively quick method for predicting changes in the flow patterns resulting from changes in the reactor operating conditions.

  9. Tests of Hercules/Ultramet CVD coatings in hot hydrogen

    International Nuclear Information System (INIS)

    Vanier, P.E.; Barletta, R.E.; Svandrlik, J.; Adams, J.

    1992-01-01

    The effort by Hercules and Ultramet to produce CVD NbC coatings, which protect carbon-carbon substrates from hot hydrogen, has had some success but with some limitations. The coatings increase the survival time at atmospheric pressure and low flow rate of hydrogen by about a factor of 40 over uncoated graphite at 3000 K. However, the grain structure is not stable at these temperatures, and after about 10--20 minutes, the coating is subject to rapid degradation by spalling in visible chunks. Further experiments would have to be performed to determine the effects of higher pressures and flow rates, for it is not clear how these factors would affect the survival time, considering that one of the main failure mechanisms is independent of the atmosphere

  10. The mediating role of cardiovascular risk factors in the relationship between symptoms of apathy and incident cardiovascular disease in community-dwelling older individuals.

    Science.gov (United States)

    Eurelings, Lisa S M; Jaccard, James; Moll van Charante, Eric P; Eikelenboom, Piet; Ligthart, Suzanne A; van Gool, Willem A; Richard, Edo

    2016-04-01

    In old age, both apathy and depression have been associated with an increased cardiovascular disease (CVD) risk. This study evaluated the mediating role of cardiovascular risk factors in the relationship of apathy and mood symptoms with incident CVD. Prospective cohort study of 1,790 community-dwelling older individuals (70-78 years) without a history of CVD or stroke. At baseline, apathy and mood symptoms were assessed with the 15-item Geriatric Depression Scale (GDS-15), of which three items represent apathy symptoms. The mediational risk factors included were diabetes mellitus (DM), body mass index (BMI), current smoking, physical inactivity, systolic blood pressure, and total cholesterol. Incident CVD was evaluated after two years of follow-up. Data were analyzed using structural equation modeling (SEM). Incident CVD occurred in 59 (3.3%) participants. Apathy symptoms had a significant estimated total effect on incident CVD, with increases of 2.2% for each unit increase in apathy score. Of this total effect, 22.7% was due to the mediational effects of physical inactivity (13.6%), current smoking (4.5%), and DM (4.5%). The remaining 77.3% was due to direct effects reflecting other mediational dynamics. No significant (in)direct effects of mood symptoms on incident CVD were found. Physical inactivity, smoking, and DM account for nearly one-fourth of the variation reflecting the link between apathy symptoms and incident CVD. This illustrates the relevance of unfavorable health behaviors and assessment of DM in older individuals with apathy. The majority of the effect of apathy symptoms on incident CVD is caused by other, yet unknown, factors.

  11. Incidence and nature of adverse reactions to antibiotics used as endocarditis prophylaxis.

    Science.gov (United States)

    Thornhill, Martin H; Dayer, Mark J; Prendergast, Bernard; Baddour, Larry M; Jones, Simon; Lockhart, Peter B

    2015-08-01

    Antibiotic prophylaxis (AP) administration prior to invasive dental procedures has been a leading focus of infective endocarditis prevention. However, there have been long-standing concerns about the risk of adverse drug reactions as a result of this practice. The objective of this study was to identify the incidence and nature of adverse reactions to amoxicillin and clindamycin prophylaxis to prevent infective endocarditis. We obtained AP prescribing data for England from January 2004 to March 2014 from the NHS Business Services Authority, and adverse drug reaction data from the Medicines and Healthcare Products Regulatory Agency's Yellow Card reporting scheme for prescriptions of the standard AP protocol of a single 3 g oral dose of amoxicillin or a single 600 mg oral dose of clindamycin for those allergic to penicillin. The reported adverse drug reaction rate for amoxicillin AP was 0 fatal reactions/million prescriptions (in fact 0 fatal reactions for nearly 3 million prescriptions) and 22.62 non-fatal reactions/million prescriptions. For clindamycin, it was 13 fatal and 149 non-fatal reactions/million prescriptions. Most clindamycin adverse drug reactions were Clostridium difficile infections. AP adverse drug reaction reporting rates in England were low, particularly for amoxicillin, and lower than previous estimates. This suggests that amoxicillin AP is comparatively safe for patients without a history of amoxicillin allergy. The use of clindamycin AP was, however, associated with significant rates of fatal and non-fatal adverse drug reactions associated with C. difficile infections. These were higher than expected and similar to those for other doses, durations and routes of clindamycin administration. © The Author 2015. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  12. Polycrystalline CVD diamond device level modeling for particle detection applications

    International Nuclear Information System (INIS)

    Morozzi, A.; Passeri, D.; Kanxheri, K.; Servoli, L.; Lagomarsino, S.; Sciortino, S.

    2016-01-01

    Diamond is a promising material whose excellent physical properties foster its use for radiation detection applications, in particular in those hostile operating environments where the silicon-based detectors behavior is limited due to the high radiation fluence. Within this framework, the application of Technology Computer Aided Design (TCAD) simulation tools is highly envisaged for the study, the optimization and the predictive analysis of sensing devices. Since the novelty of using diamond in electronics, this material is not included in the library of commercial, state-of-the-art TCAD software tools. In this work, we propose the development, the application and the validation of numerical models to simulate the electrical behavior of polycrystalline (pc)CVD diamond conceived for diamond sensors for particle detection. The model focuses on the characterization of a physically-based pcCVD diamond bandgap taking into account deep-level defects acting as recombination centers and/or trap states. While a definite picture of the polycrystalline diamond band-gap is still debated, the effect of the main parameters (e.g. trap densities, capture cross-sections, etc.) can be deeply investigated thanks to the simulated approach. The charge collection efficiency due to β -particle irradiation of diamond materials provided by different vendors and with different electrode configurations has been selected as figure of merit for the model validation. The good agreement between measurements and simulation findings, keeping the traps density as the only one fitting parameter, assesses the suitability of the TCAD modeling approach as a predictive tool for the design and the optimization of diamond-based radiation detectors.

  13. Q -factors of CVD monolayer graphene and graphite inductors

    International Nuclear Information System (INIS)

    Wang, Zidong; Peng, Pei; Tian, Zhongzheng; Ren, Liming; Zhang, Xing; Huang, Ru; Fu, Yunyi; Zhang, Qingping; Wen, Jincai

    2017-01-01

    A carbon-based inductor may serve as an important passive component in a carbon-based radio-frequency (RF) integrated circuit (IC). In this work, chemical vapor deposition (CVD) synthesized monolayer graphene and graphite inductors are fabricated and their Q -factors are investigated. We find that the large series resistance of signal path (including coil resistance and contact resistance) in monolayer graphene inductors causes negative Q -factors at the whole frequency range in measurement. Comparatively, some of the graphite inductors have all of their Q -factors above zero, due to their small signal path resistance. We also note that some other graphite inductors have negative Q -factor values at low frequency regions, but positive Q -factor values at high frequency regions. With an equivalent circuit model, we confirm that the negative Q -factors of some graphite inductors at low frequency regions are related to their relatively large contact resistances, and we are able to eliminate these negative Q -factors by improving the graphite-metal contact. Furthermore, the peak Q -factor ( Q p ) can be enhanced by lowering down the resistance of graphite coil. For an optimized 3/4-turn graphite inductor, the measured maximum Q -factor ( Q m ) can reach 2.36 and the peak Q -factor is theoretically predicted by the equivalent circuit to be as high as 6.46 at a high resonant frequency, which is beyond the testing frequency range. This research indicates that CVD synthesized graphite thin film is more suitable than graphene for fabricating inductors in carbon-based RF IC in the future. (paper)

  14. Wheelchair incidents

    NARCIS (Netherlands)

    Drongelen AW van; Roszek B; Hilbers-Modderman ESM; Kallewaard M; Wassenaar C; LGM

    2002-01-01

    This RIVM study was performed to gain insight into wheelchair-related incidents with powered and manual wheelchairs reported to the USA FDA, the British MDA and the Dutch Center for Quality and Usability Research of Technical Aids (KBOH). The data in the databases do not indicate that incidents with

  15. Cardiovascular disease (CVD) and chronic kidney disease (CKD) event rates in HIV-positive persons at high predicted CVD and CKD risk

    DEFF Research Database (Denmark)

    Boyd, Mark A; Mocroft, Amanda; Ryom, Lene

    2017-01-01

    BACKGROUND: The Data Collection on Adverse Events of Anti-HIV Drugs (D:A:D) study has developed predictive risk scores for cardiovascular disease (CVD) and chronic kidney disease (CKD, defined as confirmed estimated glomerular filtration rate [eGFR] ≤ 60 ml/min/1.73 m2) events in HIV-positive...... people. We hypothesized that participants in D:A:D at high (>5%) predicted risk for both CVD and CKD would be at even greater risk for CVD and CKD events. METHODS AND FINDINGS: We included all participants with complete risk factor (covariate) data, baseline eGFR > 60 ml/min/1.73 m2, and a confirmed (>3...... months apart) eGFR groups (≤1%, >1%-5%, >5%) and fitted Poisson models to assess whether CVD and CKD risk group effects were multiplicative. A total of 27...

  16. Computation of flow and thermal fields in a model CVD reactor

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    the Reynolds number, the jet velocity ratio, the axial position of the block, and the blockage ratio. The results obtained show that a proper combination of the process parameters can lead to an improved performance of the CVD reactor. Keywords. Fluid flow; heat transfer; application to CVD reactor; numerical solution. 1.

  17. Vascular calcifications as prognostic markers of CVD events in chest CT

    NARCIS (Netherlands)

    Jacobs, P.C.A.

    2010-01-01

    Cardiovascular disease (CVD) is one of the most common diseases affecting people throughout the world and second only to cancer as the most frequent cause of death in the Netherlands. Early detection of asymptomatic individuals at high risk of developing CVD events is an important goal since

  18. Commissioning and first operational experience of the ATLAS beam conditions and loss monitors based on pCVD diamond sensors

    Science.gov (United States)

    Gorišek, A.; Atlas Bcm Collaboration

    2010-05-01

    Primary goal of ATLAS Beam Condition and Beam Loss Monitors based on polycrystalline chemical vapor deposition (pCVD) diamonds is to protect the ATLAS inner silicon detectors from beam incidents. The sensor material was chosen due to its radiation hardness. The first one, ATLAS Beam Condition Monitor (BCM) utilizes fast front end amplifiers and processing electronics capable of handling events in real time and storing data in circular buffer thousand LHC turns deep for post-mortem analysis. There are eight detectors installed, four on each side of interaction point (IP) of ATLAS spectrometer. Due to fast timing and high efficiency for detecting single particles BCM will also provide valuable information on instantaneous luminosity. The second system, ATLAS Beam Loss Monitor (BLM) is adopted after similar system developed in the LHC beam instrumentation group with detectors replaced with the pCVD diamonds, with six of such detectors on each side of the IP. In this contribution the design and commissioning of the above two systems will be presented and results of the first operational experience will be shown as obtained in combined ATLAS framework both with the first LHC beam and commissioning cosmic ray runs.

  19. Origin, state of the art and some prospects of the diamond CVD

    CERN Document Server

    Spitsyn, B V; Alexenko, A E

    2000-01-01

    A short review on the diamond CVD origin, together with its state of the art and some prospects was given. New hybrid methods of the diamond CVD permit to gain 1.2 to 6 times of growth rate in comparison with ordinary diamond CVD's. Recent results on n-type diamond film synthesis through phosphorus doping in the course of the CVD process are briefly discussed. In comparison with high-pressure diamond synthesis, the CVD processes open new facets of the diamond as ultimate crystal for science and technology evolution. It was stressed that, mainly on the basis of new CVDs of diamond, the properties of natural diamond are not only reproduced, but can be surpassed. As examples, mechanical (fracture resistance), physical (thermal conductivity), and chemical (oxidation stability) properties are mentioned. Some present issues in the field are considered.

  20. Higher plasma high-mobility group box 1 levels are associated with incident cardiovascular disease and all-cause mortality in type 1 diabetes

    DEFF Research Database (Denmark)

    Nin, J W M; Ferreira, I; Schalkwijk, C G

    2012-01-01

    This study aimed to investigate the associations of plasma levels of the pro-inflammatory cytokine high-mobility group box 1 (HMGB1) with incident cardiovascular disease (CVD) and all-cause mortality in patients with type 1 diabetes.......This study aimed to investigate the associations of plasma levels of the pro-inflammatory cytokine high-mobility group box 1 (HMGB1) with incident cardiovascular disease (CVD) and all-cause mortality in patients with type 1 diabetes....

  1. The incidence and economic burden of injuries in Jiangxi, China.

    Science.gov (United States)

    Fang, X; Zeng, G; Linnan, H W; Jing, R; Zhu, X; Corso, P; Liu, P; Linnan, M

    2016-09-01

    This study estimated the incidence, direct medical and non-medical costs, and productivity losses due to morbidity and mortality across multiple strata for injuries that occurred in Jiangxi, China. Cross-sectional study. Data came from the Jiangxi injury survey, a provincially-representative, population-based sample of 100,010 households. The major economic costs of injuries were divided into direct costs and indirect costs. Direct costs encompass medical costs and direct non-medical costs. Indirect costs refer to the productivity losses due to injury-related morbidity and mortality. In 2005, about one of 18 residents in Jiangxi, China, experienced an injury. Overall, fall, animal bite, and road traffic crash (RTC) injuries accounted for more than 66% of all injuries, while fall, RTC, drowning, and self-harm injuries accounted for 80% of fatal injuries. Average cost per case for a fatal injury was 163,389 RMB ($20,171) for lost productivity and 2800 RMB ($346) in direct medical & non-medical costs. A non-fatal injury resulting in hospitalisation or permanent disability on average caused 5221 RMB ($643) in direct costs and 18,437 RMB ($2276) in lost productivity and, an additional loss of three school days. A non-hospitalised non-fatal injury on average caused 303 ($37) RMB in direct costs and 491 RMB ($61) in lost productivity and, an additional loss of 0.5 school days. The unequivocal evidence of the substantial health and financial burden of injuries indicates to Chinese policy makers that more research and efforts are needed to find efficacious and cost-effective interventions targeting injury. Copyright © 2016 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

  2. CVD and obesity in transitional Syria: a perspective from the Middle East

    Directory of Open Access Journals (Sweden)

    Baaj MK

    2012-03-01

    Full Text Available Hani Barakat1, Hanniya Barakat1, Mohamad K Baaj21Kalamoon Private University Medical School, Deir Attieh, Syria; 2Aleppo University Medical School, Aleppo, SyriaPurpose: Syria is caught in the middle of a disruptive nutritional transition. Its healthcare system is distracted by challenges and successes in other areas while neglecting to address the onslaught of Syria's cardiovascular disease (CVD epidemic. Despite the official viewpoint touting improvement in health indicators, current trends jeopardize population health, and several surveys in the Syrian population signal the epidemic spreading far and wide. The goal is to counteract the indifference towards obesity as a threat to Syrian's health, as the country is slowly becoming a leader in CVD mortality globally.Methods: PubMed, World Health Organization, and official government websites were searched for primary surveys in Syria related to CVD morbidity, mortality, and risk factors. Inclusion criteria ensured that results maximized relevance while producing comparable studies. Statistical analysis was applied to detect the most common risk factor and significant differences in risk factor prevalence and CVD rates.Results: Obesity remained the prevailing CVD risk factor except in older Syrian men, where smoking and hypertension were more common. CVD mortality was more common in males due to coronary disease, while stroke dominated female mortality. The young workforce is especially impacted, with 50% of CVD mortality occurring before age 65 years and an 81% prevalence of obesity in women over 45 years.Conclusion: Syria can overcome its slow response to the CVD epidemic and curb further deterioration by reducing obesity and, thus, inheritance and clustering of risk factors. This can be achieved via multilayered awareness and intensive parental and familial involvement. Extinguishing the CVD epidemic is readily achievable as demonstrated in other countries.Keywords: Syria, CVD, obesity, risk

  3. Selective tungsten deposition in a batch cold wall CVD system

    International Nuclear Information System (INIS)

    Chow, R.; Kang, S.; Harshbarger, W.R.; Susoeff, M.

    1987-01-01

    Selective deposition of tungsten offers many advantages for VLSI technology. The process can be used as a planarization technique for multilevel interconnect technology, it can be used to fill contacts and to provide a barrier layer between Al and Si materials, and the selective W process might be used as a self-aligned technology to provide low resistance layers on source/drain and gate conductors. Recent publications have indicate that cold wall CVD systems provide advantages for development of selective W process. Genus has investigated selective W deposition processing, and we have developed a selective W deposition process for the Genus 8402 multifilm deposition system. This paper describes the Genus 8402 system and the selective W process developed in this reactor. To further develop selective W technology, Genus has signed an agreement with General Electric establishing a joint development program. As a part of this program, the authors characterized the selective W process for encroachment, Si consumption and degrees of selectivity on various dielectrics. The status of this development activity and process characterization is reviewed in this paper

  4. A Fast CVD Diamond Beam Loss Monitor for LHC

    CERN Document Server

    Griesmayer, E; Dobos, D; Effinger, E; Pernegger, H

    2011-01-01

    Chemical Vapour Deposition (CVD) diamond detectors were installed in the collimation area of the CERN LHC to study their feasibility as Fast Beam Loss Monitors in a high-radiation environment. The detectors were configured with a fast, radiation-hard pre-amplifier with a bandwidth of 2 GHz. The readout was via an oscilloscope with a bandwidth of 1 GHz and a sampling rate of 5 GSPS. Despite the 250 m cable run from the detectors to the oscilloscope, single MIPs were resolved with a 2 ns rise time, a pulse width of 10 ns and a time resolution of less than 1 ns. Two modes of operation were applied. For the analysis of unexpected beam aborts, the loss profile was recorded in a 1 ms buffer and, for nominal operation, the histogram of the time structure of the losses was recorded in synchronism with the LHC period of 89.2 μs. Measurements during the LHC start-up (February to December 2010) are presented. The Diamond Monitors gave an unprecedented insight into the time structure of the beam losses resolving the 400...

  5. Carbon Nanotubes Growth by CVD on Graphite Fibers

    Science.gov (United States)

    Zhu, Shen; Su, Ching-Hua; Cochrane, J. C.; Lehoczky, S. L.; Muntele, I.; Ila, D.; Curreri, Peter A. (Technical Monitor)

    2002-01-01

    Due to the superior electrical and mechanical properties of carbon nanotubes (CNT), synthesizing CNT on various substances for electronics devices and reinforced composites have been engaged in many efforts for applications. This presentation will illustrate CNT synthesized on graphite fibers by thermal CVD. On the fiber surface, iron nanoparticles as catalysts for CNT growth are coated. The growth temperature ranges from 600 to 1000 C and the pressure ranges from 100 Torr to one atmosphere. Methane and hydrogen gases with methane content of 10% to 100% are used for the CNT synthesis. At high growth temperatures (greater than or equal to 900 C), the rapid inter-diffusion of the transition metal iron on the graphite surface results in the rough fiber surface without any CNT grown on it. When the growth temperature is relative low (650-800 C), CNT with catalytic particles on the nanotube top ends are fabricated on the graphite surface. (Methane and hydrogen gases with methane content of 10% to 100% are used for the CNT synthesis.) (By measuring the samples) Using micro Raman spectroscopy in the breath mode region, single-walled or multi-walled CNT (MWCNT), depending on growth concentrations, are found. Morphology, length and diameter of these MWCNT are determined by scanning electron microscopy and Raman spectroscopy. The detailed results of syntheses and characterizations will be discussed in the presentation.

  6. Facility for continuous CVD coating of ceramic fibers

    International Nuclear Information System (INIS)

    Moore, A.W.

    1992-01-01

    The development of new and improved ceramic fibers has spurred the development and application of ceramic composites with improved strength, strength/weight ratio, toughness, and durability at increasingly high temperatures. For many systems, the ceramic fibers can be used without modification because their properties are adequate for the chosen application. However, in order to take maximum advantage of the fiber properties, it is often necessary to coat the ceramic fibers with materials of different composition and properties. Examples include (1) boron nitride coatings on a ceramic fiber, such as Nicalon silicon carbide, to prevent reaction with the ceramic matrix during fabrication and to enhance fiber pullout and increase toughness when the ceramic composite is subjected to stress; (2) boron nitride coatings on ceramic yarns, such as Nicalon for use as thermal insulation panels in an aerodynamic environment, to reduce abrasion of the Nicalon and to inhibit the oxidation of free carbon contained within the Nicalon; and (3) ceramic coatings on carbon yarns and carbon-carbon composites to permit use of these high-strength, high-temperature materials in oxidizing environments at very high temperatures. This paper describes a pilot-plant-sized CVD facility for continuous coating of ceramic fibers and some of the results obtained so far with this equipment

  7. Circulating Branched-Chain Amino Acids and Incident Cardiovascular Disease in a Prospective Cohort of US Women.

    Science.gov (United States)

    Tobias, Deirdre K; Lawler, Patrick R; Harada, Paulo H; Demler, Olga V; Ridker, Paul M; Manson, JoAnn E; Cheng, Susan; Mora, Samia

    2018-04-01

    Circulating branched-chain amino acids (BCAAs; isoleucine, leucine, and valine) are strong predictors of type 2 diabetes mellitus (T2D), but their association with cardiovascular disease (CVD) is uncertain. We hypothesized that plasma BCAAs are positively associated with CVD risk and evaluated whether this was dependent on an intermediate diagnosis of T2D. Participants in the Women's Health Study prospective cohort were eligible if free of CVD at baseline blood collection (n=27 041). Plasma metabolites were measured via nuclear magnetic resonance spectroscopy. Multivariable Cox regression models estimated hazard ratios (HRs) and 95% confidence intervals (CIs) for BCAAs with incident CVD (myocardial infarction, stroke, and coronary revascularization). We confirmed 2207 CVD events over a mean 18.6 years of follow-up. Adjusting for age, body mass index, and other established CVD risk factors, total BCAAs were positively associated with CVD (per SD: HR, 1.13; 95% CI, 1.08-1.18), comparable to LDL-C (low-density lipoprotein cholesterol) with CVD (per SD: HR, 1.12; 95% CI, 1.07-1.17). BCAAs were associated with coronary events (myocardial infarction: HR, 1.16; 95% CI, 1.06-1.26; revascularization: HR, 1.17; 95% CI, 1.11-1.25), and borderline significant association with stroke (HR, 1.07; 95% CI, 0.99-1.15). The BCAA-CVD association was greater ( P interaction=0.036) among women who developed T2D before CVD (HR, 1.20; 95% CI, 1.08-1.32) versus women without T2D (HR, 1.08; 95% CI, 1.03-1.14). Adjusting for LDL-C, an established CVD risk factor, did not attenuate these findings; however, adjusting for HbA1c and insulin resistance eliminated the associations of BCAAs with CVD. Circulating plasma BCAAs were positively associated with incident CVD in women. Impaired BCAA metabolism may capture the long-term risk of the common cause underlying T2D and CVD. © 2018 American Heart Association, Inc.

  8. Incidents analysis

    International Nuclear Information System (INIS)

    Francois, P.

    1996-01-01

    We undertook a study programme at the end of 1991. To start with, we performed some exploratory studies aimed at learning some preliminary lessons on this type of analysis: Assessment of the interest of probabilistic incident analysis; possibility of using PSA scenarios; skills and resources required. At the same time, EPN created a working group whose assignment was to define a new approach for analysis of incidents on NPPs. This working group gave thought to both aspects of Operating Feedback that EPN wished to improve: Analysis of significant incidents; analysis of potential consequences. We took part in the work of this group, and for the second aspects, we proposed a method based on an adaptation of the event-tree method in order to establish a link between existing PSA models and actual incidents. Since PSA provides an exhaustive database of accident scenarios applicable to the two most common types of units in France, they are obviously of interest for this sort of analysis. With this method we performed some incident analyses, and at the same time explores some methods employed abroad, particularly ASP (Accident Sequence Precursor, a method used by the NRC). Early in 1994 EDF began a systematic analysis programme. The first, transient phase will set up methods and an organizational structure. 7 figs

  9. A case-crossover study of sleep, fatigue, and other transient exposures at workplace and the risk of non-fatal occupational injuries among the employees of an Italian academic hospital

    OpenAIRE

    Francesca Valent; Marika Mariuz; Giulia Liva; Fabrizio Bellomo; Daniela De Corti; Stefania Degan; Alberto Ferrazzano; Silvio Brusaferro

    2016-01-01

    Objectives: Transient exposure with acute effect has been shown to affect the risk of occupational injuries in various industrial settings and at the healthcare workplace. The objective of this study has been to identify transient exposures related to occupational injury risk in an Italian teaching hospital. Material and Methods: A case-crossover study was conducted among the employees of the University Hospital of Udine who reported an occupational injury, commuting accident, or incident inv...

  10. Unprocessed Meat Consumption and Incident Cardiovascular Diseases in Korean Adults: The Korean Genome and Epidemiology Study (KoGES

    Directory of Open Access Journals (Sweden)

    Kyong Park

    2017-05-01

    Full Text Available Meat consumption has been shown to be associated with cardiovascular disease (CVD risk in Western societies; however, epidemiological data are limited on the Korean population. Therefore, we examined the associations between unprocessed meat consumption and CVD incidence in Korea. Data were derived from the Ansung-Ansan cohort (2001–2012, including 9370 adults (40–69 years without CVD or cancer at baseline. Total unprocessed meat consumption was estimated as the sum of unprocessed red meat (beef, pork, and organ meat and poultry consumption. In the fully adjusted Cox regression model, the relative risks of CVD across increasing quintiles of total unprocessed meat intake were 1.0 (reference, 0.72 (95% confidence interval (CI: 0.55, 0.95, 0.57 (95% CI: 0.42, 0.78, 0.69 (95% CI: 0.51, 0.95, and 0.69 (95% CI: 0.48, 0.97, but no significant linear trend was detected (p for trend = 0.14. Frequent poultry consumption was significantly associated with a decreased CVD risk; this association showed a dose-response relationship (p for trend = 0.04. This study showed that a moderate intake of total unprocessed meat was inversely associated with CVD risk. A significant inverse association between poultry consumption and incident CVD was observed in Korean adults, requiring further confirmation in other populations.

  11. Unprocessed Meat Consumption and Incident Cardiovascular Diseases in Korean Adults: The Korean Genome and Epidemiology Study (KoGES)

    Science.gov (United States)

    Park, Kyong; Son, Jakyung; Jang, Jiyoung; Kang, Ryungwoo; Chung, Hye-Kyung; Lee, Kyong Won; Lee, Seung-Min; Lim, Hyunjung; Shin, Min-Jeong

    2017-01-01

    Meat consumption has been shown to be associated with cardiovascular disease (CVD) risk in Western societies; however, epidemiological data are limited on the Korean population. Therefore, we examined the associations between unprocessed meat consumption and CVD incidence in Korea. Data were derived from the Ansung-Ansan cohort (2001–2012), including 9370 adults (40–69 years) without CVD or cancer at baseline. Total unprocessed meat consumption was estimated as the sum of unprocessed red meat (beef, pork, and organ meat) and poultry consumption. In the fully adjusted Cox regression model, the relative risks of CVD across increasing quintiles of total unprocessed meat intake were 1.0 (reference), 0.72 (95% confidence interval (CI): 0.55, 0.95), 0.57 (95% CI: 0.42, 0.78), 0.69 (95% CI: 0.51, 0.95), and 0.69 (95% CI: 0.48, 0.97), but no significant linear trend was detected (p for trend = 0.14). Frequent poultry consumption was significantly associated with a decreased CVD risk; this association showed a dose-response relationship (p for trend = 0.04). This study showed that a moderate intake of total unprocessed meat was inversely associated with CVD risk. A significant inverse association between poultry consumption and incident CVD was observed in Korean adults, requiring further confirmation in other populations. PMID:28505126

  12. Unprocessed Meat Consumption and Incident Cardiovascular Diseases in Korean Adults: The Korean Genome and Epidemiology Study (KoGES).

    Science.gov (United States)

    Park, Kyong; Son, Jakyung; Jang, Jiyoung; Kang, Ryungwoo; Chung, Hye-Kyung; Lee, Kyong Won; Lee, Seung-Min; Lim, Hyunjung; Shin, Min-Jeong

    2017-05-15

    Meat consumption has been shown to be associated with cardiovascular disease (CVD) risk in Western societies; however, epidemiological data are limited on the Korean population. Therefore, we examined the associations between unprocessed meat consumption and CVD incidence in Korea. Data were derived from the Ansung-Ansan cohort (2001-2012), including 9370 adults (40-69 years) without CVD or cancer at baseline. Total unprocessed meat consumption was estimated as the sum of unprocessed red meat (beef, pork, and organ meat) and poultry consumption. In the fully adjusted Cox regression model, the relative risks of CVD across increasing quintiles of total unprocessed meat intake were 1.0 (reference), 0.72 (95% confidence interval (CI): 0.55, 0.95), 0.57 (95% CI: 0.42, 0.78), 0.69 (95% CI: 0.51, 0.95), and 0.69 (95% CI: 0.48, 0.97), but no significant linear trend was detected ( p for trend = 0.14). Frequent poultry consumption was significantly associated with a decreased CVD risk; this association showed a dose-response relationship ( p for trend = 0.04). This study showed that a moderate intake of total unprocessed meat was inversely associated with CVD risk. A significant inverse association between poultry consumption and incident CVD was observed in Korean adults, requiring further confirmation in other populations.

  13. The impact of public smoking ban on the incidence of myocardial infarction hospitalizations.

    Science.gov (United States)

    Khawaja, Owais; Al-Mallah, Mouaz

    2010-01-01

    Smoking is a well-established risk factor for cardiovascular disease (CVD) and acute myocardial infarction (AMI). Exposure to tobacco smoke is associated with an estimated 35,000 cardiovascular deaths per year in nonsmokers. In addition, the risk of CVD decreases with the cessation of exposure to smoking. Association of smoking with CVD has been well known for years; however, association of secondhand smoke with CVD has been a topic of great interest, especially for the past 2 decades. Multiple studies and articles have evaluated the impact of smoking ban on the incidence of AMI-related hospitalizations. In this article, we discuss the effect of smoking ban on the economy and on human health in general, as well as its potential effects on the prevalence of smoking.

  14. CVD and obesity in transitional Syria: a perspective from the Middle East.

    Science.gov (United States)

    Barakat, Hani; Barakat, Hanniya; Baaj, Mohamad K

    2012-01-01

    Syria is caught in the middle of a disruptive nutritional transition. Its healthcare system is distracted by challenges and successes in other areas while neglecting to address the onslaught of Syria's cardiovascular disease (CVD) epidemic. Despite the official viewpoint touting improvement in health indicators, current trends jeopardize population health, and several surveys in the Syrian population signal the epidemic spreading far and wide. The goal is to counteract the indifference towards obesity as a threat to Syrian's health, as the country is slowly becoming a leader in CVD mortality globally. PubMed, World Health Organization, and official government websites were searched for primary surveys in Syria related to CVD morbidity, mortality, and risk factors. Inclusion criteria ensured that results maximized relevance while producing comparable studies. Statistical analysis was applied to detect the most common risk factor and significant differences in risk factor prevalence and CVD rates. Obesity remained the prevailing CVD risk factor except in older Syrian men, where smoking and hypertension were more common. CVD mortality was more common in males due to coronary disease, while stroke dominated female mortality. The young workforce is especially impacted, with 50% of CVD mortality occurring before age 65 years and an 81% prevalence of obesity in women over 45 years. Syria can overcome its slow response to the CVD epidemic and curb further deterioration by reducing obesity and, thus, inheritance and clustering of risk factors. This can be achieved via multilayered awareness and intensive parental and familial involvement. Extinguishing the CVD epidemic is readily achievable as demonstrated in other countries.

  15. Global, regional, and national incidence, prevalence, and years lived with disability for 310 diseases and injuries, 1990-2015

    DEFF Research Database (Denmark)

    Truelsen, Thomas Clement

    2016-01-01

    incidence and prevalence by age, sex, cause, year, and geography with a wide range of updated and standardised analytical procedures. Improvements from GBD 2013 included the addition of new data sources, updates to literature reviews for 85 causes, and the identification and inclusion of additional studies...... published up to November, 2015, to expand the database used for estimation of non-fatal outcomes to 60 900 unique data sources. Prevalence and incidence by cause and sequelae were determined with DisMod-MR 2.1, an improved version of the DisMod-MR Bayesian meta-regression tool first developed for GBD 2010......, educational attainment, and fertility (the Socio-demographic Index [SDI]) and used it to compare observed patterns of health loss to the expected pattern for countries or locations with similar SDI scores. FINDINGS: We generated 9·3 billion estimates from the various combinations of prevalence, incidence...

  16. Controlled incorporation of mid-to-high Z transition metals in CVD diamond

    Energy Technology Data Exchange (ETDEWEB)

    Biener, M M; Biener, J; Kucheyev, S O; Wang, Y M; El-Dasher, B; Teslich, N E; Hamza, A V; Obloh, H; Mueller-Sebert, W; Wolfer, M; Fuchs, T; Grimm, M; Kriele, A; Wild, C

    2010-01-08

    We report on a general method to fabricate transition metal related defects in diamond. Controlled incorporation of Mo and W in synthetic CVD diamond was achieved by adding volatile metal precursors to the diamond chemical vapor deposition (CVD) growth process. Effects of deposition temperature, grain structure and precursor exposure on the doping level were systematically studied, and doping levels of up to 0.25 at.% have been achieved. The metal atoms are uniformly distributed throughout the diamond grains without any indication of inclusion formation. These results are discussed in context of the kinetically controlled growth process of CVD diamond.

  17. Rare earth-doped alumina thin films deposited by liquid source CVD processes

    Energy Technology Data Exchange (ETDEWEB)

    Deschanvres, J.L.; Meffre, W.; Joubert, J.C.; Senateur, J.P. [Ecole Nat. Superieure de Phys. de Grenoble, St. Martin d`Heres (France). Lab. des Materiaux et du Genie Phys.; Robaut, F. [Consortium des Moyens Technologiques Communs, Institut National Polytechnique de Grenoble, BP 75, 38402 St Martin d`Heres (France); Broquin, J.E.; Rimet, R. [Laboratoire d`Electromagnetisme, Microondes et Optoelectronique, CNRS-Ecole Nationale Superieure d`Electronique et Radioelectricite de Grenoble, BP 257, 38016 Grenoble, Cedex (France)

    1998-07-24

    Two types of liquid-source CVD processes are proposed for the growth of rare earth-doped alumina thin films suitable as amplifying media for integrated optic applications. Amorphous, transparent, pure and erbium- or neodymium-doped alumina films were deposited between 573 and 833 K by atmospheric pressure aerosol CVD. The rare earth doping concentration increases by decreasing the deposition temperature. The refractive index of the alumina films increases as a function of the deposition temperature from 1.53 at 573 K to 1.61 at 813 K. Neodymium-doped films were also obtained at low pressure by liquid source injection CVD. (orig.) 7 refs.

  18. Multilayered and composite PVD-CVD coatings in cemented carbides manufacture

    International Nuclear Information System (INIS)

    Glushkov, V.N.; Anikeev, A.I.; Anikin, V.N.; Vereshchaka, A.S.

    2001-01-01

    Carbide cutting tools with wear-resistant coatings deposited by CVD process are widely employed in mechanical engineering to ensure a substantially longer service life of tool systems. However, the relatively high temperature and long time of the process make the substrate decarburise and, as a result, the bend strength and performance characteristics of a tool decrease. The present study suggests the problem of deteriorated strength of CVD-coated carbide tools be solved by the development of a technology that combines arc-PVD and CVD processes to deposit multilayered coatings of titanium and aluminium compounds. (author)

  19. Chemical vapor deposition (CVD) of uranium for alpha spectrometry

    International Nuclear Information System (INIS)

    Ramirez V, M. L.; Rios M, C.; Ramirez O, J.; Davila R, J. I.; Mireles G, F.

    2015-09-01

    The uranium determination through radiometric techniques as alpha spectrometry requires for its proper analysis, preparation methods of the source to analyze and procedures for the deposit of this on a surface or substrate. Given the characteristics of alpha particles (small penetration distance and great loss of energy during their journey or its interaction with the matter), is important to ensure that the prepared sources are thin, to avoid problems of self-absorption. The routine methods used for this are the cathodic electro deposition and the direct evaporation, among others. In this paper the use of technique of chemical vapor deposition (CVD) for the preparation of uranium sources is investigated; because by this, is possible to obtain thin films (much thinner than those resulting from electro deposition or evaporation) on a substrate and comprises reacting a precursor with a gas, which in turn serves as a carrier of the reaction products to achieve deposition. Preliminary results of the chemical vapor deposition of uranium are presented, synthesizing and using as precursor molecule the uranyl acetylacetonate, using oxygen as carrier gas for the deposition reaction on a glass substrate. The uranium films obtained were found suitable for alpha spectrometry. The variables taken into account were the precursor sublimation temperatures and deposition temperature, the reaction time and the type and flow of carrier gas. Of the investigated conditions, two depositions with encouraging results that can serve as reference for further work to improve the technique presented here were selected. Alpha spectra obtained for these depositions and the characterization of the representative samples by scanning electron microscopy and X-ray diffraction are also presented. (Author)

  20. Cutting characteristics of dental diamond burs made with CVD technology Características de corte de pontas odontológicas diamantadas obtidas pela tecnologia CVD

    Directory of Open Access Journals (Sweden)

    Luciana Monti Lima

    2006-04-01

    Full Text Available The aim of this study was to determine the cutting ability of chemical vapor deposition (CVD diamond burs coupled to an ultrasonic dental unit handpiece for minimally invasive cavity preparation. One standard cavity was prepared on the mesial and distal surfaces of 40 extracted human third molars either with cylindrical or with spherical CVD burs. The cutting ability was compared regarding type of substrate (enamel and dentin and direction of handpiece motion. The morphological characteristics, width and depth of the cavities were analyzed and measured using scanning electron micrographs. Statistical analysis using the Kruskal-Wallis test (p O objetivo deste estudo foi determinar a habilidade de corte das pontas de diamante obtidas pelo processo de deposição química a vapor (CVD associadas ao aparelho de ultra-som no preparo cavitário minimamente invasivo. Uma cavidade padronizada foi preparada nas faces mesial e distal de 40 terceiros molares, utilizando-se pontas de diamante CVD cilíndrica e esférica. A habilidade de corte foi comparada quanto ao tipo de substrato (esmalte e dentina e quanto à direção do movimento realizado com a ponta. As características morfológicas, a largura e profundidade das cavidades foram analisadas e medidas em microscopia eletrônica de varredura. A análise estatística pelo teste de Kruskal-Wallis (p < 0,05 revelou que a largura e profundidade das cavidades foram significativamente maiores em dentina. Cavidades mais largas foram obtidas quando se utilizou a ponta de diamante CVD cilíndrica, e mais profundas quando a ponta esférica foi empregada. A direção do movimento da ponta não influenciou o tamanho das cavidades, sendo os cortes produzidos pelas pontas de diamante CVD precisos e conservadores.

  1. Risk of incident cardiovascular disease among users of smokeless tobacco in the Atherosclerosis Risk in Communities (ARIC) study.

    Science.gov (United States)

    Yatsuya, Hiroshi; Folsom, Aaron R

    2010-09-01

    Use of smokeless tobacco in the United States has been relatively constant in recent years, as tobacco companies continue aggressive marketing campaigns. The health effects of smokeless tobacco use need further documentation. Thus, the authors examined whether current use of smokeless tobacco was associated with increased incidence of cardiovascular disease (CVD) in 14,498 men and women aged 45-64 years at baseline (1987-1989) in the Atherosclerosis Risk in Communities (ARIC) Study. There were 2,572 incident CVD events (myocardial infarction, coronary revascularization, coronary death, or stroke) during a median of 16.7 years of follow-up (maximum = 19.1 years). Current use of smokeless tobacco at baseline was associated with 1.27-fold greater CVD incidence (95% confidence interval: 1.06, 1.52) than was nonuse, independently of demographic, socioeconomic, and lifestyle and other tobacco-related variables. Past use of smokeless tobacco was not associated with CVD incidence. In conclusion, current use of smokeless tobacco was associated with increased risk of CVD incidence in ARIC cigarette nonsmokers. Current users of smokeless tobacco should be informed of its harm and advised to quit the practice. Current cigarette smokers should also be given sufficient information on safe, therapeutic methods of quitting which do not include switching to smokeless tobacco.

  2. Case studies of hydrogen sulphide occupational exposure incidents in the UK.

    Science.gov (United States)

    Jones, Kate

    2014-12-15

    The UK Health and Safety Executive has investigated several incidents of workplace accidents involving hydrogen sulphide exposure in recent years. Biological monitoring has been used in some incidents to determine the cause of unconsciousness resulting from these incidents and as a supporting evidence in regulatory enforcement. This paper reports on three case incidents and discusses the use of biological monitoring in such cases. Biological monitoring has a role in identifying hydrogen sulphide exposure in incidents, whether these are occupational or in the wider environment. Sample type, time of collection and sample storage are important factors in the applicability of this technique. For non-fatal incidents, multiple urine samples are recommended at two or more time points between the incident and 15 h post-exposure. For routine occupational monitoring, post-shift samples should be adequate. Due to endogenous levels of urinary thiosulphate, it is likely that exposures in excess of 12 ppm for 30 min (or 360 ppm/min equivalent) would be detectable using biological monitoring. This is within the Acute Exposure Guideline Level 2 (the level of the chemical in air at or above which there may be irreversible or other serious long-lasting effects or impaired ability to escape) for hydrogen sulphide. Crown Copyright © 2014. Published by Elsevier Ireland Ltd. All rights reserved.

  3. Laser-Directed CVD 3D Printing of Refractory Metal Rocket Propulsion Hardware Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this project, Ultramet will develop a three-dimensional (3D) laser-directed chemical vapor deposition (CVD) additive manufacturing system to build free-form...

  4. High-efficiency supercapacitor electrodes of CVD-grown graphenes hybridized with multiwalled carbon nanotubes

    International Nuclear Information System (INIS)

    Kalam, Amir Abul; Bae, Joon Ho; Park, Soo Bin; Seo, Yong Ho

    2015-01-01

    We demonstrate, for the first time, high-efficiency supercapacitors by utilizing chemical vapor deposition (CVD)-grown graphenes hybridized with multiwalled carbon nanotubes (CNTs). A single-layer graphene was grown by simple CVD growth method, and transferred to polyethylene terephthalate substrates. The bare graphenes were further hybridized with multiwalled CNTs by drop-coating CNTs on graphenes. The supercapacitors using bare graphenes and graphenes with CNTs revealed that graphenes with CNTs resulted in enhanced supercapacitor performances of 2.2- (the mass-specific capacitance) and 4.4-fold (the area-specific capacitance) of those of bare graphenes. Our strategy to improve electrochemical performance of CVD-grown graphenes is advantageous for large-scale graphene electrodes due to high electrical conductivity of CVD-grown graphenes and cost-effectiveness of using multiwalled CNTs as compared to conventional employment of single-walled CNTs

  5. High-efficiency supercapacitor electrodes of CVD-grown graphenes hybridized with multiwalled carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Kalam, Amir Abul; Bae, Joon Ho [Dept. of Nano-physics, Gachon University, Seongnam (Korea, Republic of); Park, Soo Bin; Seo, Yong Ho [Nanotechnology and Advanced Material Engineering, HMC, and GRI, Sejong University, Seoul (Korea, Republic of)

    2015-08-15

    We demonstrate, for the first time, high-efficiency supercapacitors by utilizing chemical vapor deposition (CVD)-grown graphenes hybridized with multiwalled carbon nanotubes (CNTs). A single-layer graphene was grown by simple CVD growth method, and transferred to polyethylene terephthalate substrates. The bare graphenes were further hybridized with multiwalled CNTs by drop-coating CNTs on graphenes. The supercapacitors using bare graphenes and graphenes with CNTs revealed that graphenes with CNTs resulted in enhanced supercapacitor performances of 2.2- (the mass-specific capacitance) and 4.4-fold (the area-specific capacitance) of those of bare graphenes. Our strategy to improve electrochemical performance of CVD-grown graphenes is advantageous for large-scale graphene electrodes due to high electrical conductivity of CVD-grown graphenes and cost-effectiveness of using multiwalled CNTs as compared to conventional employment of single-walled CNTs.

  6. Chemical vapor deposition (CVD) of uranium for alpha spectrometry; Deposicion quimica de vapor (CVD) de uranio para espectrometria alfa

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez V, M. L.; Rios M, C.; Ramirez O, J.; Davila R, J. I.; Mireles G, F., E-mail: luisalawliet@gmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas (Mexico)

    2015-09-15

    The uranium determination through radiometric techniques as alpha spectrometry requires for its proper analysis, preparation methods of the source to analyze and procedures for the deposit of this on a surface or substrate. Given the characteristics of alpha particles (small penetration distance and great loss of energy during their journey or its interaction with the matter), is important to ensure that the prepared sources are thin, to avoid problems of self-absorption. The routine methods used for this are the cathodic electro deposition and the direct evaporation, among others. In this paper the use of technique of chemical vapor deposition (CVD) for the preparation of uranium sources is investigated; because by this, is possible to obtain thin films (much thinner than those resulting from electro deposition or evaporation) on a substrate and comprises reacting a precursor with a gas, which in turn serves as a carrier of the reaction products to achieve deposition. Preliminary results of the chemical vapor deposition of uranium are presented, synthesizing and using as precursor molecule the uranyl acetylacetonate, using oxygen as carrier gas for the deposition reaction on a glass substrate. The uranium films obtained were found suitable for alpha spectrometry. The variables taken into account were the precursor sublimation temperatures and deposition temperature, the reaction time and the type and flow of carrier gas. Of the investigated conditions, two depositions with encouraging results that can serve as reference for further work to improve the technique presented here were selected. Alpha spectra obtained for these depositions and the characterization of the representative samples by scanning electron microscopy and X-ray diffraction are also presented. (Author)

  7. Tribological Characteristics and Applications of Superhard Coatings: CVD Diamond, DLC, and c-BN

    Science.gov (United States)

    Miyoshi, Kazuhisa; Murakawa, Masao; Watanabe, Shuichi; Takeuchi, Sadao; Wu, Richard L. C.

    1999-01-01

    Results of fundamental research on the tribological properties of chemical-vapor-deposited (CVD) diamond, diamondlike carbon, and cubic boron nitride films in sliding contact with CVD diamond in ultrahigh vacuum, dry nitrogen, humid air, and water are discussed. Furthermore, the actual and potential applications of the three different superhard coatings in the field of tribology technology, particularly for wear parts and tools, are reviewed.

  8. Deposition and micro electrical discharge machining of CVD-diamond layers incorporated with silicon

    Science.gov (United States)

    Kühn, R.; Berger, T.; Prieske, M.; Börner, R.; Hackert-Oschätzchen, M.; Zeidler, H.; Schubert, A.

    2017-10-01

    In metal forming, lubricants have to be used to prevent corrosion or to reduce friction and tool wear. From an economical and ecological point of view, the aim is to avoid the usage of lubricants. For dry deep drawing of aluminum sheets it is intended to apply locally micro-structured wear-resistant carbon based coatings onto steel tools. One type of these coatings are diamond layers prepared by chemical vapor deposition (CVD). Due to the high strength of diamond, milling processes are unsuitable for micro-structuring of these layers. In contrast to this, micro electrical discharge machining (micro EDM) is a suitable process for micro-structuring CVD-diamond layers. Due to its non-contact nature and its process principle of ablating material by melting and evaporating, it is independent of the hardness, brittleness or toughness of the workpiece material. In this study the deposition and micro electrical discharge machining of silicon incorporated CVD-diamond (Si-CVD-diamond) layers were presented. For this, 10 µm thick layers were deposited on molybdenum plates by a laser-induced plasma CVD process (LaPlas-CVD). For the characterization of the coatings RAMAN- and EDX-analyses were conducted. Experiments in EDM were carried out with a tungsten carbide tool electrode with a diameter of 90 µm to investigate the micro-structuring of Si-CVD-diamond. The impact of voltage, discharge energy and tool polarity on process speed and resulting erosion geometry were analyzed. The results show that micro EDM is a suitable technology for micro-structuring of silicon incorporated CVD-diamond layers.

  9. Bone repair after osteotomy with diamond burs and CVD ultrasonic tips – histological study in rats

    OpenAIRE

    Matuda, Fábio S.; Pagani, Clovis; Miranda, Carolina B.; Crema, Aline A. S.; Brentel, Aline S.; Carvalho, Yasmin R.

    2010-01-01

    This study histologically evaluated the behavior of bone tissue of rats submitted to osteotomy with conventional diamond burs in high speed and a new ultrasonic diamond tips system (CVD – Chemical Vapor Deposition), at different study periods. The study was conducted on 24 Wistar rats. Osteotomy was performed on the posterior paws of each rat, with utilization of diamond burs in high speed under thorough water cooling at the right paw, and CVD tips at the left paw. Animals were killed a...

  10. CVD Diamond, DLC, and c-BN Coatings for Solid Film Lubrication

    Science.gov (United States)

    Miyoshi, Kazuhisa

    1998-01-01

    When the main criteria for judging coating performance were coefficient of friction and wear rate, which had to be less than 0.1 and 10(exp -6) mm(exp 3)/N-m, respectively, carbon- and nitrogen-ion-implanted, fine-grain CVD diamond and DLC ion beam deposited on fine-grain CVD diamond met the requirements regardless of environment (vacuum, nitrogen, and air).

  11. Characterisation of CVD diamond detectors used for fast neutron flux monitoring

    CERN Document Server

    Foulon, F; Amosov, V N; Kaschuck, Y; Frunze, V; Tromson, D; Brambilla, A

    2002-01-01

    Natural diamond detectors (NDD) have been successfully used for fast neutron spectrometry on various fusion installations in plasma diagnostics. These detectors can work at high temperature, are radiation hard and exhibit a high energy resolution. However, the use of NDD is limited by the availability of IIa type diamonds exhibiting high electronic properties. With the recent advance in the growth of high quality chemically vapour deposited (CVD) diamond at LETI, CVD diamond appears to be a very promising material for plasma diagnostics. We present here for the first time results of the use of CVD diamond detectors for fast neutron flux monitoring on a neutron generator. The characteristics of CVD diamond detectors are compared with that of high quality NDD made by TRINITI. Pulse height spectra have been measured with CVD detectors and NDD under both 5.5 MeV alpha particles and 14.1 MeV neutrons. The quality of CVD diamond enables the recording of structured spectra allowing the distinction between the differ...

  12. Ion beam induced surface graphitization of CVD diamond for x-ray beam position monitor applications

    International Nuclear Information System (INIS)

    Liu, Chian; Shu, D.; Kuzay, T.M.; Wen, L.; Melendres, C.A.; Argonne National Lab., IL

    1996-01-01

    The Advanced Photon Source at ANL is a third-generation synchrotron facility that generates powerful x-ray beams on its undulator beamlines. It is important to know the position and angle of the x- ray beam during experiments. Due to very high heat flux levels, several patented x-ray beam position monitors (XBPM) exploiting chemical vapor deposition (CVD) diamond have been developed. These XBPMs have a thin layer of low-atomic-mass metallic coating so that photoemission from the x rays generate a minute but measurable current for position determination. Graphitization of the CVD diamond surface creates a very thin, intrinsic and conducting layer that can stand much higher temperatures and minimal x-ray transmission losses compared to the coated metallic layers. In this paper, a laboratory sputter ion source was used to transform selected surfaces of a CVD diamond substrate into graphite. The effect of 1-5 keV argon ion bombardment on CVD diamond surfaces at various target temperatures from 200 to 500 C was studied using Auger electron spectroscopy and in-situ electrical resistivity measurements. Graphitization after the ion bombardment has been confirmed and optimum conditions for graphitization studied. Raman spectroscopy was used to identify the overall diamond structure in the bulk of CVD diamond substrate after the ion bombardments. It was found that target temperature plays an important role in stability and electrical conductivity of the irradiated CVD diamonds

  13. Women's reproductive factors and incident cardiovascular disease in the UK Biobank.

    Science.gov (United States)

    Peters, Sanne Ae; Woodward, Mark

    2018-01-15

    Studies have suggested that women's reproductive factors are associated with the risk of cardiovascular disease (CVD); however, findings are mixed. We assessed the relationship between reproductive factors and incident CVD in the UK Biobank. Between 2006 and 2010, the UK Biobank recruited over 500 000 participants aged 40-69 years across the UK. During 7 years of follow-up, 9054 incident cases of CVD (34% women), 5782 cases of coronary heart disease (CHD) (28% women), and 3489 cases of stroke (43% women) were recorded among 267 440 women and 215 088 men without a history of CVD at baseline. Cox regression models yielded adjusted hazard ratios (HRs) for CVD, CHD and stroke associated with reproductive factors. Adjusted HRs (95% CI) for CVD were 1.10 (1.01 to 1.30) for early menarche (<12 years), 0.97 (0.96 to 0.98) for each year increase in age at first birth, 1.04 (1.00 to 1.09) for each miscarriage, 1.14 (1.02 to 1.28) for each stillbirth, and 1.33 (1.19 to 1.49) for early menopause (<47 years). Hysterectomy without oophorectomy or with previous oophorectomy had adjusted HRs of 1.16 (1.06 to 1.28) and 2.30 (1.20 to 4.43) for CVD. Each additional child was associated with a HR for CVD of 1.03 (1.00 to 1.06) in women and 1.03 (1.02 to 1.05) in men. Early menarche, early menopause, earlier age at first birth, and a history of miscarriage, stillbirth or hysterectomy were each independently associated with a higher risk of CVD in later life. The relationship between the number of children and incident CVD was similar for men and women. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  14. Cardiovascular disease (CVD) and chronic kidney disease (CKD) event rates in HIV-positive persons at high predicted CVD and CKD risk

    DEFF Research Database (Denmark)

    Boyd, Mark A; Mocroft, Amanda; Ryom, Lene

    2017-01-01

    BACKGROUND: The Data Collection on Adverse Events of Anti-HIV Drugs (D:A:D) study has developed predictive risk scores for cardiovascular disease (CVD) and chronic kidney disease (CKD, defined as confirmed estimated glomerular filtration rate [eGFR] ≤ 60 ml/min/1.73 m2) events in HIV...

  15. Neutrophil to Lymphocyte Ratio and Cardiovascular Disease Incidence in HIV-Infected Patients: A Population-Based Cohort Study.

    Directory of Open Access Journals (Sweden)

    Eugenia Quiros-Roldan

    Full Text Available Neutrophil to lymphocyte ratio (NLR has been shown to predict occurrence of cardiovascular events in the general population. The aim of our study was to evaluate the role of NLR to predict major cardiovascular disease (CVD events in HIV-infected subjects. We performed a retrospective cohort study of HIV-infected patients residing in the Local Health Authority (LHA of Brescia, northern Italy, from 2000 to 2012. The incidence of CVD events in HIV-positive patients was compared with that expected in the general population living in the same area, computing standardized incidence ratios (SIRs. To evaluate the predictive role of NLR, univariate and multivariate Cox regression models were applied, computing hazard ratios (HRs. A total of 3766 HIV-infected patients (mean age 38.1 years, 71.3% males were included (person-years 28768.6. A total of 134 CVD events occurred in 119 HIV-infected patients. A 2-fold increased risk (SIR 2.02 of CVD was found in HIV-infected patients compared to the general population. NLR levels measured at baseline and during follow-up were independently associated with CVD incidence, when also adjusting for both traditional CVD risk factors and HIV-related factors (HR 3.05 for NLR≥ 1.2. The area under the receiver operating characteristics (ROC curve showed a modest, not statistically significant, increase, from 0.81 to 0.83, with addition of NLR to Framingham risk score model covariates. In conclusion an elevated NLR is a predictor of risk CVD in HIV-infected patients, independently from the traditional CVD risk factors.

  16. A case-crossover study of sleep, fatigue, and other transient exposures at workplace and the risk of non-fatal occupational injuries among the employees of an Italian academic hospital.

    Science.gov (United States)

    Valent, Francesca; Mariuz, Marika; Liva, Giulia; Bellomo, Fabrizio; De Corti, Daniela; Degan, Stefania; Ferrazzano, Alberto; Brusaferro, Silvio

    2016-11-18

    Transient exposure with acute effect has been shown to affect the risk of occupational injuries in various industrial settings and at the healthcare workplace. The objective of this study has been to identify transient exposures related to occupational injury risk in an Italian teaching hospital. A case-crossover study was conducted among the employees of the University Hospital of Udine who reported an occupational injury, commuting accident, or incident involving biological risk in a 15-month period in the years 2013 and 2014. The matched-pair interval approach was used to assess the role of acute sleep deprivation whereas the usual frequency approach was used for other 13 transient exposures. Sleep hours were not associated with the risk of injuries whereas a significant risk increase was associated with fatigue, rush, distraction, emergency situations, teaching to or being taught by someone, non-compliant patients, bloody operative/work field, excess noise, complex procedures, and anger. We identified transient exposures that increased the risk of occupational injuries in an Italian teaching hospital, providing indications for interventions to increase workers' safety at the healthcare workplace. Int J Occup Med Environ Health 2016;29(6):1001-1009. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  17. A case-crossover study of sleep, fatigue, and other transient exposures at workplace and the risk of non-fatal occupational injuries among the employees of an Italian academic hospital

    Directory of Open Access Journals (Sweden)

    Francesca Valent

    2016-12-01

    Full Text Available Objectives: Transient exposure with acute effect has been shown to affect the risk of occupational injuries in various industrial settings and at the healthcare workplace. The objective of this study has been to identify transient exposures related to occupational injury risk in an Italian teaching hospital. Material and Methods: A case-crossover study was conducted among the employees of the University Hospital of Udine who reported an occupational injury, commuting accident, or incident involving biological risk in a 15-month period in the years 2013 and 2014. The matched-pair interval approach was used to assess the role of acute sleep deprivation whereas the usual frequency approach was used for other 13 transient exposures. Results: Sleep hours were not associated with the risk of injuries whereas a significant risk increase was associated with fatigue, rush, distraction, emergency situations, teaching to or being taught by someone, non-compliant patients, bloody operative/work field, excess noise, complex procedures, and anger. Conclusions: We identified transient exposures that increased the risk of occupational injuries in an Italian teaching hospital, providing indications for interventions to increase workers’ safety at the healthcare workplace. Int J Occup Med Environ Health 2016;29(6:1001–1009

  18. Tribosystems based on multilayered micro/nanocrystalline CVD diamond coatings =

    Science.gov (United States)

    Shabani, Mohammadmehdi

    A combinacao das caracteristicas do diamante microcristalino (MCD) e nanocristalino (NCD), tais como elevada adesao do MCD e a baixa rugosidade superficial e baixo coeficiente de atrito do NCD, e ideal para aplicacoes tribologicas exigentes. Deste modo, o presente trabalho centrou-se no desenvolvimento de revestimentos em multicamada MCD/NCD. Filmes com dez camadas foram depositados em amostras de cerâmicos de Si3N4 pela tecnica de deposicao quimica em fase vapor assistida por filamento quente (HFCVD). A microestrutura, qualidade do diamante e adesao foram investigadas usando tecnicas como SEM, AFM, espectroscopia Raman, DRX, indentacao Brale e perfilometria otica 3D. Diversas geometrias para aplicacoes distintas foram revestidas: discos e esferas para testes tribologicos a escala laboratorial, e para testes em servico, aneis de empanques mecânicos e pastilhas de corte para torneamento. Nos ensaios tribologicos esfera-sobre-plano em movimento reciproco, sob 10-90% de humidade relativa (RH), os valores medios dos coeficientes de atrito maximo e em estado estacionario sao de 0,32 e 0,09, respetivamente. Em relacao aos coeficientes de desgaste, observou-se um valor minimo de cerca de 5,2x10-8 mm3N-1m-1 para valores intermedios de 20-25% de RH. A humidade relativa tem um forte efeito sobre o valor da carga critica que triplica a partir de 40 N a 10% RH para 120 N a 90% de RH. No intervalo de temperaturas 50-100 °C, as cargas criticas sao semelhantes as obtidas em condicoes de baixa RH ( 10-25%). A vida util das ferramentas com revestimento de dez camadas alternadas MCD/NCD e 24 mum de espessura total no torneamento de um composito de matriz metalica Al- 15 vol% Al2O3 (Al-MMC) e melhor do que a maioria das ferramentas de diamante CVD encontradas na literatura, e semelhante a maioria das ferramentas de diamante policristalino (PCD). A formacao de cratera ocorre por desgaste sucessivo das varias camadas, atrasando a delaminacao total do revestimento de diamante do

  19. Friction Properties of Polished Cvd Diamond Films Sliding against Different Metals

    Science.gov (United States)

    Lin, Zichao; Sun, Fanghong; Shen, Bin

    2016-11-01

    Owing to their excellent mechanical and tribological properties, like the well-known extreme hardness, low coefficient of friction and high chemical inertness, chemical vapor deposition (CVD) diamond films have found applications as a hard coating for drawing dies. The surface roughness of the diamond films is one of the most important attributes to the drawing dies. In this paper, the effects of different surface roughnesses on the friction properties of diamond films have been experimentally studied. Diamond films were fabricated using hot filament CVD. The WC-Co (Co 6wt.%) drawing dies were used as substrates. A gas mixture of acetone and hydrogen gas was used as the feedstock gas. The CVD diamond films were polished using mechanical polishing. Polished diamond films with three different surface roughnesses, as well as the unpolished diamond film, were fabricated in order to study the tribological performance between the CVD diamond films and different metals with oil lubrication. The unpolished and polished CVD diamond films are characterized with scanning electron microscope (SEM), atomic force microscope (AFM), surface profilometer, Raman spectrum and X-ray diffraction (XRD). The friction examinations were carried out by using a ball-on-plate type reciprocating friction tester. Low carbide steel, stainless steel, copper and aluminum materials were used as counterpart balls. Based on this study, the results presented the friction coefficients between the polished CVD films and different metals. The friction tests demonstrate that the smooth surface finish of CVD diamond films is beneficial for reducing their friction coefficients. The diamond films exhibit low friction coefficients when slid against the stainless steel balls and low carbide steel ball, lower than that slid against copper ball and aluminum ball, attributed to the higher ductility of copper and aluminum causing larger amount of wear debris adhering to the sliding interface and higher adhesive

  20. Cardiovascular disease (CVD and chronic kidney disease (CKD event rates in HIV-positive persons at high predicted CVD and CKD risk: A prospective analysis of the D:A:D observational study.

    Directory of Open Access Journals (Sweden)

    Mark A Boyd

    2017-11-01

    Full Text Available The Data Collection on Adverse Events of Anti-HIV Drugs (D:A:D study has developed predictive risk scores for cardiovascular disease (CVD and chronic kidney disease (CKD, defined as confirmed estimated glomerular filtration rate [eGFR] ≤ 60 ml/min/1.73 m2 events in HIV-positive people. We hypothesized that participants in D:A:D at high (>5% predicted risk for both CVD and CKD would be at even greater risk for CVD and CKD events.We included all participants with complete risk factor (covariate data, baseline eGFR > 60 ml/min/1.73 m2, and a confirmed (>3 months apart eGFR 1%-5%, >5% and fitted Poisson models to assess whether CVD and CKD risk group effects were multiplicative. A total of 27,215 participants contributed 202,034 person-years of follow-up: 74% male, median (IQR age 42 (36, 49 years, median (IQR baseline year of follow-up 2005 (2004, 2008. D:A:D risk equations predicted 3,560 (13.1% participants at high CVD risk, 4,996 (18.4% participants at high CKD risk, and 1,585 (5.8% participants at both high CKD and high CVD risk. CVD and CKD event rates by predicted risk group were multiplicative. Participants at high CVD risk had a 5.63-fold (95% CI 4.47, 7.09, p < 0.001 increase in CKD events compared to those at low risk; participants at high CKD risk had a 1.31-fold (95% CI 1.09, 1.56, p = 0.005 increase in CVD events compared to those at low risk. Participants' CVD and CKD risk groups had multiplicative predictive effects, with no evidence of an interaction (p = 0.329 and p = 0.291 for CKD and CVD, respectively. The main study limitation is the difference in the ascertainment of the clinically defined CVD endpoints and the laboratory-defined CKD endpoints.We found that people at high predicted risk for both CVD and CKD have substantially greater risks for both CVD and CKD events compared with those at low predicted risk for both outcomes, and compared to those at high predicted risk for only CVD or CKD events. This suggests that CVD and

  1. Diabetic retinopathy is associated with mortality and cardiovascular disease incidence: the EURODIAB prospective complications study

    NARCIS (Netherlands)

    van Hecke, M.V.; Dekker, J.M.; Stehouwer, C.D.A.; Polak, B.C.P.; Fuller, J.H.; Sjolie, A.K.; Kofinis, A.; Rottiers, R.; Porta, M.; Chaturvedi, N.

    2005-01-01

    OBJECTIVE - To study the relationship of nonproliferative and proliferative retinopathy with all-cause mortality and cardiovascular disease (CVD) incidence in type 1 diabetic patients and, additionally, the role of cardiovascular risk factors in these associations. RESEARCH DESIGN AND METHODS - This

  2. Plasma branched-chain amino acids and incident cardiovascular disease in the PREDIMED trial

    Science.gov (United States)

    Ruiz-Canela, Miguel; Toledo, Estefania; Clish, Clary B.; Hruby, Adela; Liang, Liming; Salas-Salvadó, Jordi; Razquin, Cristina; Corella, Dolores; Estruch, Ramón; Ros, Emilio; Fitó, Montserrat; Gómez-Gracia, Enrique; Arós, Fernando; Fiol, Miquel; Lapetra, José; Serra-Majem, Lluis; Martínez-González, Miguel A.; Hu, Frank B.

    2016-01-01

    Background The role of branched-chain amino acids (BCAAs) in cardiovascular disease (CVD) remains poorly understood. We hypothesized that baseline BCAA concentrations predict future risk of CVD and that a Mediterranean Diet (MedDiet) intervention may counteract this effect. Methods We developed a case-cohort study within the “PREvención con DIeta MEDiterránea” (PREDIMED), with 226 incident CVD cases and 781 non-cases. We used LC-MS/MS to measure plasma BCAAs (leucine, isoleucine and valine), both at baseline and after 1-year follow-up. The primary outcome was a composite of incident stroke, myocardial infarction, or cardiovascular death. Results After adjustment for potential confounders, baseline leucine and isoleucine concentrations were associated with higher CVD risk: the hazard ratios (HRs) for the highest vs. lowest quartile were 1.70 (95% confidence interval, 1.05–2.76) and 2.09 (1.27–3.44), respectively. Stronger associations were found for stroke. For both CVD and stroke, we found higher HRs across successive quartiles of BCAAs in the control group than in the MedDiet groups. Using stroke as the outcome, a significant interaction (P=0.009) between the baseline BCAA score and the intervention with MedDiet was observed. No significant effect of the intervention on 1-yr changes in BCAAs nor any association between 1-year changes in BCAAs and CVD were observed. Conclusions Higher concentrations of baseline BCAAs were associated with increased risk of CVD, especially stroke, in a high cardiovascular risk population. A Mediterranean-style diet had a negligible effect on 1-year changes in BCAAs, but it may counteract the harmful effects of BCAAs on stroke. PMID:26888892

  3. Effects of invitation to participate in health surveys on the incidence of cardiovascular disease

    DEFF Research Database (Denmark)

    Skaaby, Tea; Jørgensen, Torben; Linneberg, Allan

    2017-01-01

    the effect of repeated general health checks on the 30-year incidence of ischaemic heart disease (IHD), stroke and all-cause mortality. METHODS: The study included all persons (n = 17 845) aged 30, 40, 50 and 60 years living in 11 municipalities in Copenhagen, the capital of Denmark. An age- and gender......BACKGROUND: The effects of health checks on reducing cardiovascular disease morbidity and mortality in the general population have been questioned. There are few randomized studies with long-term follow-up. We used a cohort randomly selected from a general population as a randomized trial to study......-stratified random sample (n = 4789) was invited to up to three health checks, from 1982 to 1994 (intervention group). The remaining 12 994 persons were defined as the control group. Complete follow-up on mortality, emigration and fatal and non-fatal IHD and stroke until 31 December 2012 was obtained by linkage...

  4. Movers and stayers: The geography of residential mobility and CVD hospitalisations in Auckland, New Zealand.

    Science.gov (United States)

    Exeter, Daniel J; Sabel, Clive E; Hanham, Grant; Lee, Arier C; Wells, Susan

    2015-05-01

    The association between area-level disadvantage and health and social outcomes is unequivocal. However, less is known about the health impact of residential mobility, particularly at intra-urban scales. We used an encrypted National Health Index (eNHI) number to link individual-level data recorded in routine national health databases to construct a cohort of 641,532 participants aged 30+ years to investigate the association between moving and CVD hospitalisations in Auckland, New Zealand. Residential mobility was measured for participants according to changes in the census Meshblock of usual residence, obtained from the Primary Health Organisation (PHO) database for every calendar quarter between 1/1/2006 and 31/12/2012. The NZDep2006 area deprivation score at the start and end of a participant's inclusion in the study was used to measure deprivation mobility. We investigated the relative risk of movers being hospitalised for CVD relative to stayers using multi-variable binomial regression models, controlling for age, gender, deprivation and ethnicity. Considered together, movers were 1.22 (1.19-1.26) times more likely than stayers to be hospitalised for CVD. Using the 5×5 deprivation origin-destination matrix to model a patient's risk of CVD based on upward, downward or sideways deprivation mobility, movers within the least deprived (NZDep2006 Quintile 1) areas were 10% less likely than stayers to be hospitalised for CVD, while movers within the most deprived (NZDep2006 Q5) areas were 45% more likely than stayers to have had their first CVD hospitalisation in 2006-2012 (RR: 1.45 [1.35-1.55]). Participants who moved upward also had higher relative risks of having a CVD event, although their risk was less than those observed for participants experiencing downward deprivation mobility. This research suggests that residential mobility is an important determinant of CVD in Auckland. Further investigation is required to determine the impact moving has on the risk of

  5. Socioeconomic variation in incidence of primary and secondary major cardiovascular disease events: an Australian population-based prospective cohort study.

    Science.gov (United States)

    Korda, Rosemary J; Soga, Kay; Joshy, Grace; Calabria, Bianca; Attia, John; Wong, Deborah; Banks, Emily

    2016-11-21

    Cardiovascular disease (CVD) disproportionately affects disadvantaged people, but reliable quantitative evidence on socioeconomic variation in CVD incidence in Australia is lacking. This study aimed to quantify socioeconomic variation in rates of primary and secondary CVD events in mid-age and older Australians. Baseline data (2006-2009) from the 45 and Up Study, an Australian cohort involving 267,153 men and women aged ≥ 45, were linked to hospital and death data (to December 2013). Outcomes comprised first event - death or hospital admission - for major CVD combined, as well as myocardial infarction and stroke, in those with and without prior CVD (secondary and primary events, respectively). Cox regression estimated hazard ratios (HRs) for each outcome in relation to education (and income and area-level disadvantage), separately by age group (45-64, 65-79, and ≥ 80 years), adjusting for age and sex, and additional sociodemographic factors. There were 18,207 primary major CVD events over 1,144,845 years of follow-up (15.9/1000 person-years), and 20,048 secondary events over 260,357 years (77.0/1000 person-years). For both primary and secondary events, incidence increased with decreasing education, with the absolute difference between education groups largest for secondary events. Age-sex adjusted hazard ratios were highest in the 45-64 years group: for major CVDs, HR (no qualifications vs university degree) = 1.62 (95% CI: 1.49-1.77) for primary events, and HR = 1.49 (1.34-1.65) for secondary events; myocardial infarction HR = 2.31 (1.87-2.85) and HR = 2.57 (1.90-3.47) respectively; stroke HR = 1.48 (1.16-1.87) and HR = 1.97 (1.42-2.74) respectively. Similar but attenuated results were seen in older age groups, and with income. For area-level disadvantage, CVD gradients were weak and non-significant in older people (> 64 years). Individual-level data are important for quantifying socioeconomic variation in CVD incidence, which

  6. Reference Intervals for Non-Fasting CVD Lipids and Inflammation Markers in Pregnant Indigenous Australian Women.

    Science.gov (United States)

    Schumacher, Tracy L; Oldmeadow, Christopher; Clausen, Don; Weatherall, Loretta; Keogh, Lyniece; Pringle, Kirsty G; Rae, Kym M

    2017-10-14

    Indigenous Australians experience high rates of cardiovascular disease (CVD). The origins of CVD may commence during pregnancy, yet few serum reference values for CVD biomarkers exist specific to the pregnancy period. The Gomeroi gaaynggal research project is a program that undertakes research and provides some health services to pregnant Indigenous women. Three hundred and ninety-nine non-fasting samples provided by the study participants (206 pregnancies and 175 women) have been used to construct reference intervals for CVD biomarkers during this critical time. A pragmatic design was used, in that women were not excluded for the presence of chronic or acute health states. Percentile bands for non-linear relationships were constructed according to the methods of Wright and Royston (2008), using the xriml package in StataIC 13.1. Serum cholesterol, triglycerides, cystatin-C and alkaline phosphatase increased as gestational age progressed, with little change seen in high-sensitivity C-Reactive Protein and γ glutamyl transferase. Values provided in the reference intervals are consistent with findings from other research projects. These reference intervals will form a basis with which future CVD biomarkers for pregnant Indigenous Australian women can be compared.

  7. Spin transport in two-layer-CVD-hBN/graphene/hBN heterostructures

    Science.gov (United States)

    Gurram, M.; Omar, S.; Zihlmann, S.; Makk, P.; Li, Q. C.; Zhang, Y. F.; Schönenberger, C.; van Wees, B. J.

    2018-01-01

    We study room-temperature spin transport in graphene devices encapsulated between a layer-by-layer-stacked two-layer-thick chemical vapor deposition (CVD) grown hexagonal boron nitride (hBN) tunnel barrier, and a few-layer-thick exfoliated-hBN substrate. We find mobilities and spin-relaxation times comparable to that of SiO2 substrate-based graphene devices, and we obtain a similar order of magnitude of spin relaxation rates for both the Elliott-Yafet and D'Yakonov-Perel' mechanisms. The behavior of ferromagnet/two-layer-CVD-hBN/graphene/hBN contacts ranges from transparent to tunneling due to inhomogeneities in the CVD-hBN barriers. Surprisingly, we find both positive and negative spin polarizations for high-resistance two-layer-CVD-hBN barrier contacts with respect to the low-resistance contacts. Furthermore, we find that the differential spin-injection polarization of the high-resistance contacts can be modulated by dc bias from -0.3 to +0.3 V with no change in its sign, while its magnitude increases at higher negative bias. These features point to the distinctive spin-injection nature of the two-layer-CVD-hBN compared to the bilayer-exfoliated-hBN tunnel barriers.

  8. Effect of pulse biasing on the morphology of diamond films grown by hot filament CVD

    International Nuclear Information System (INIS)

    Beake, B.D.; Hussain, I.U.; Rego, C.; Ahmed, W.

    1999-01-01

    There has been considerable interest in the chemical vapour deposition (CVD) of diamond due to its unique mechanical, optical and electronic properties, which make it useful for many applications. For use in optical and electronic applications further developments in the CVD process are required to control the surface morphology and crystal size of the diamond films. These will require a detailed understanding of both the nucleation and growth processes that effect the properties. The technique of bias enhanced nucleation (BEN) of diamond offers better reproducibility than conventional pre-treatment methods such as mechanical abrasion. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) have been used study the surface modification of diamond films on silicon substrates during pulse biased growth in a hot filament CVD reactor. Pre-abraded silicon substrates were subjected to a three-step sequential growth process: (i) diamond deposition under standard CVD conditions, (ii) bias pre-treatment and (iii) deposition under standard conditions. The results show that the bias pre-treatment time is a critical parameter controlling the surface morphology and roughness of the diamond films deposited. Biasing reduces the surface roughness from 152 nm for standard CVD diamond to 68 nm for the 2.5 minutes pulse biased film. Further increase in the bias time results in an increase in surface roughness and crystallite size. (author)

  9. Micro/nanoimprinting of glass under high temperature using a CVD diamond mold

    International Nuclear Information System (INIS)

    Komori, M; Uchiyama, H; Takebe, H; Kusuura, T; Kobayashi, K; Kuwahara, H; Tsuchiya, T

    2008-01-01

    For micro/nanoimprinting of glass, the appropriate combination of glass and mold material was clarified by an adhesion test using chemical vapor deposition (CVD) diamond, silicon, glassy carbon and sintered nitride ceramics as the mold material, and Pyrex, TEMPAX and BK7 as the glass material. The result of the adhesion test shows that CVD diamond is suitable for imprinting with a wide variety of glass materials under various temperature conditions. The method of fabricating the CVD diamond mold using focused ion beam (FIB) was examined, and it was clarified that the grain boundary of CVD diamond has little effect on the surface condition. Glass micro/nanoimprinting was performed using the CVD diamond mold. The effect of the molding conditions, such as the molding temperature and mold-release temperature, on the height of glass transcription was clarified. The effects of pattern size and shape were also investigated. On the basis of the results, a method of selecting the molding conditions to obtain the desired transcript height was developed. In this research, the entire flow of glass micro/nanoimprinting, including mold material selection, the mold fabrication process and molding process, was proposed experimentally, and the selection method of the molding conditions was shown

  10. Can surface preparation with CVD diamond tip influence on bonding to dental tissues?

    Science.gov (United States)

    Aparecido Kawaguchi, Fernando; Brossi Botta, Sergio; Nilo Vieira, Samuel; Steagall Júnior, Washington; Bona Matos, Adriana

    2008-04-01

    This study evaluated the influence of chemical vapor deposition (CVD) tips surface treatments of enamel and dentin on bonding resistance of two adhesive systems. Thirty embedded samples were divided in 12 groups ( n = 10), according to factors: substrate (enamel and dentin), adhesive system [etch-and-rinse (SB) and self-etch]; and the surface treatments (paper discs, impact CVD tips and tangential CVD tip). When CVD tip was used in the impact mode the tip was applied perpendicular to dental surface, while at tangential mode, the tip worked parallel to dental surface. Specimens were tested in tension after 24 h at 0.5 mm/min of cross-head speed. ANOVA results, in MPa showed that in enamel, only adhesive system factor was statistically significant ( p = 0.015) under tested conditions, with higher bond strength observed for SB groups. However, in dentin the best bonding performance was obtained in SE groups ( p = 0.00). In both tested substrates, results did not show statistically significant difference for factors treatment and its interactions. ConclusionsIt may be concluded that CVD-tip surface treatment, in both tested modes, did not influence on adhesion to enamel and dentin. But, it is important to choose adhesive system according to the tissue available to bonding.

  11. Applicability of the Existing CVD Risk Assessment Tools to Type II Diabetics in Oman: A Review

    Directory of Open Access Journals (Sweden)

    Abdulhakeem Al-Rawahi

    2015-09-01

    Full Text Available Patients with type II diabetes (T2DM have an elevated risk for cardiovascular disease (CVD, and it is considered to be a leading cause of morbidity and premature mortality in these patients. Many traditional risk factors such as age, male sex, hypertension, dyslipidemia, glycemic control, diabetes duration, renal dysfunction, obesity, and smoking have been studied and identified as independent factors for CVD. Quantifying the risk of CVD among diabetics using the common risk factors in order to plan the treatment and preventive measures is important in the management of these patients as recommended by many clinical guidelines. Therefore, several risk assessment tools have been developed in different parts of the world for this purpose. These include the tools that have been developed for general populations and considered T2DM as a risk factor, and the tools that have been developed for T2DM populations specifically. However, due to the differences in sociodemographic factors and lifestyle patterns, as well as the differences in the distribution of various CVD risk factors in different diabetic populations, the external applicability of these tools on different populations is questionable. This review aims to address the applicability of the existing CVD risk models to the Omani diabetic population.

  12. Growth of mirror-like ultra-nanocrystalline diamond (UNCD) films by a facile hybrid CVD approach

    Science.gov (United States)

    Yang, Shuo; Man, Weidong; Lyu, Jilei; Xiao, Xiong; You, Zhiheng; Jiang, Nan

    2017-05-01

    In this study, growth of mirror-like ultra-nanocrystalline diamond (UNCD) films by a facile hybrid CVD approach was presented. The nucleation and deposition of UNCD films were conducted in microwave plasma CVD (MPCVD) and direct current glow discharge CVD (DC GD CVD) on silicon substrates, respectively. A very high nucleation density (about 1 × 1011 nuclei cm-2) was obtained after plasma pretreatment. Furthermore, large area mirror-like UNCD films of Φ 50 mm were synthesized by DC GD CVD. The thickness and grain size of the UNCD films are 24 μm and 7.1 nm, respectively. In addition, the deposition mechanism of the UNCD films was discussed. Development of CVD ultra-nanocrystalline diamond films and related high-precision machining products (International S&T Cooperation, No. S2015ZR1100).

  13. Prospective association of the Mediterranean diet with cardiovascular disease incidence and mortality and its population impact in a non-Mediterranean population: the EPIC-Norfolk study.

    Science.gov (United States)

    Tong, Tammy Y N; Wareham, Nicholas J; Khaw, Kay-Tee; Imamura, Fumiaki; Forouhi, Nita G

    2016-09-29

    Despite convincing evidence in the Mediterranean region, the cardiovascular benefit of the Mediterranean diet is not well established in non-Mediterranean countries and the optimal criteria for defining adherence are unclear. The population attributable fraction (PAF) of adherence to this diet is also unknown. In the UK-based EPIC-Norfolk prospective cohort, we evaluated habitual diets assessed at baseline (1993-1997) and during follow-up (1998-2000) using food-frequency questionnaires (n = 23,902). We estimated a Mediterranean diet score (MDS) using cut-points projected from the Mediterranean dietary pyramid, and also three other pre-existing MDSs. Using multivariable-adjusted Cox regression with repeated measures of MDS and covariates, we examined prospective associations between each MDS with incident cardiovascular diseases (CVD) by 2009 and mortality by 2013, and estimated PAF for each outcome attributable to low MDS. We observed 7606 incident CVD events (2818/100,000 person-years) and 1714 CVD deaths (448/100,000). The MDS based on the Mediterranean dietary pyramid was significantly associated with lower incidence of the cardiovascular outcomes, with hazard ratios (95 % confidence intervals) of 0.95 (0.92-0.97) per one standard deviation for incident CVD and 0.91 (0.87-0.96) for CVD mortality. Associations were similar for composite incident ischaemic heart disease and all-cause mortality. Other pre-existing MDSs showed similar, but more modest associations. PAF due to low dietary pyramid based MDS (Mediterranean diet was associated with lower CVD incidence and mortality in the UK. This diet has an important population health impact for the prevention of CVD.

  14. Endotoxemia, immune response to periodontal pathogens, and systemic inflammation associate with incident cardiovascular disease events.

    Science.gov (United States)

    Pussinen, Pirkko J; Tuomisto, Karolina; Jousilahti, Pekka; Havulinna, Aki S; Sundvall, Jouko; Salomaa, Veikko

    2007-06-01

    In periodontitis, overgrowth of gram-negative bacteria may cause endotoxemia and systemic inflammation leading to cardiovascular diseases (CVD). We investigated in a prospective study the associations of serum endotoxin, antibodies to periodontal pathogens, and inflammation markers with the risk of incident CVD. The FINRISK 1992 cohort of 6051 individuals was followed up for 10 years. We examined 185 incident CVD events and a control cohort of 320 individuals using a prospective case-cohort design. High antibody response to periodontal pathogens independently predicted incident CVD events with hazard ratios (HR, quartile 4 versus quartiles 1 to 3, 95% CI) of 1.87 (1.13 to 3.08). The subjects with a high antibody response and high CRP or interleukin (IL)-6 had multivariate-adjusted HRs of 3.01 (1.27 to 7.09) and 3.11 (1.42 to 6.83) compared with low-responders, respectively. The corresponding HRs for high endotoxin concentration were 1.82 (1.22 to 2.73, alone), 3.92 (1.99 to 7.74, with CRP), 3.54 (1.78 to 7.03, with IL-6), and 2.26 (1.13 to 4.52, with tumor necrosis factor (TNF)-alpha) after adjusting for age and gender. These associations were abolished after adjusting for serum lipids. High endotoxin/HDL ratio, however, had a multivariate-adjusted HR of 1.92 (1.19 to 3.08) for CVD events. Our results suggest that the exposure to periodontal pathogens or endotoxin induces systemic inflammation leading to increased risk for CVD.

  15. Non-classical crystallization of thin films and nanostructures in CVD and PVD processes

    CERN Document Server

    Hwang, Nong Moon

    2016-01-01

    This book provides a comprehensive introduction to a recently-developed approach to the growth mechanism of thin films and nanostructures via chemical vapour deposition (CVD). Starting from the underlying principles of the low pressure synthesis of diamond films, it is shown that diamond growth occurs not by individual atoms but by charged nanoparticles. This newly-discovered growth mechanism turns out to be general to many CVD and some physical vapor deposition (PVD) processes. This non-classical crystallization is a new paradigm of crystal growth, with active research taking place on growth in solution, especially in biomineralization processes. Established understanding of the growth of thin films and nanostructures is based around processes involving individual atoms or molecules. According to the author’s research over the last two decades, however, the generation of charged gas phase nuclei is shown to be the rule rather than the exception in the CVD process, and charged gas phase nuclei are actively ...

  16. Polymer Adsorption on Graphite and CVD Graphene Surfaces Studied by Surface-Specific Vibrational Spectroscopy.

    Science.gov (United States)

    Su, Yudan; Han, Hui-Ling; Cai, Qun; Wu, Qiong; Xie, Mingxiu; Chen, Daoyong; Geng, Baisong; Zhang, Yuanbo; Wang, Feng; Shen, Y R; Tian, Chuanshan

    2015-10-14

    Sum-frequency vibrational spectroscopy was employed to probe polymer contaminants on chemical vapor deposition (CVD) graphene and to study alkane and polyethylene (PE) adsorption on graphite. In comparing the spectra from the two surfaces, it was found that the contaminants on CVD graphene must be long-chain alkane or PE-like molecules. PE adsorption from solution on the honeycomb surface results in a self-assembled ordered monolayer with the C-C skeleton plane perpendicular to the surface and an adsorption free energy of ∼42 kJ/mol for PE(H(CH2CH2)nH) with n ≈ 60. Such large adsorption energy is responsible for the easy contamination of CVD graphene by impurity in the polymer during standard transfer processes. Contamination can be minimized with the use of purified polymers free of PE-like impurities.

  17. Large area coating with TiC by a plasma CVD method

    International Nuclear Information System (INIS)

    Doi, Akira; Murakami, Yoshio.

    1985-01-01

    A three-dimensional plasma chemical vapor deposition (TP-CVD) method, which was developed recentrly, was discussed comparing with conventional PVD and CVD. The TP-CVD method was applied to deposit a TiC coating on a molybdenum first wall material of JT-60. As a result, it was found that the material of complicated three-demensional shape was desirably coated by TiC without recrystallization. Thickness of the TiC coating on areas exposed and unexposed by plasma was 20+-5 μm and 5 μm, respectively. Chemical composition, crystal structure and chemical bond characteristics of the coating were actually identical with those obtained by conventional methods. Adherence to the substrate was also quite good. (Kubozono, M.)

  18. Development of CVD Diamond for Industrial Applications Final Report CRADA No. TC-2047-02

    Energy Technology Data Exchange (ETDEWEB)

    Caplan, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Olstad, R. [General Atomics, San Diego, CA (United States); Jory, H. [Communications and Power Industries, Palo Alto, CA (United States); Vikharov, A. L. [Russian Academy of Sciences (RAS), Moscow (Russian Federation)

    2017-09-08

    This project was a collaborative effort to develop and demonstrate a new millimeter microwave assisted chemical vapor deposition(CVD) process for manufacturing large diamond disks with greatly reduced processing times and costs from those now available. In the CVD process, carbon based gases (methane) and hydrogen are dissociated into plasma using microwave discharge and then deposited layer by layer as polycrystalline diamond onto a substrate. The available low frequency (2.45GHz) microwave sources used elsewhere (De Beers) result in low density plasmas and low deposition rates: 4 inch diamond disks take 6-8 weeks to process. The new system developed in this project uses a high frequency 30GHz Gyrotron as the microwave source and a quasi-optical CVD chamber resulting in a much higher density plasma which greatly reduced the diamond processing times (1-2 weeks)

  19. Cold Vacuum Dryer (CVD) Facility Fire Protection System Design Description (SYS 24)

    Energy Technology Data Exchange (ETDEWEB)

    SINGH, G.

    2000-10-17

    This system design description (SDD) addresses the Cold Vacuum Drying (CVD) Facility fire protection system (FPS). The primary features of the FPS for the CVD are a fire alarm and detection system, automatic sprinklers, and fire hydrants. The FPS also includes fire extinguishers located throughout the facility and fire hydrants to assist in manual firefighting efforts. In addition, a fire barrier separates the operations support (administrative) area from the process bays and process bay support areas. Administrative controls to limit combustible materials have been established and are a part of the overall fire protection program. The FPS is augmented by assistance from the Hanford Fire Department (HED) and by interface systems including service water, electrical power, drains, instrumentation and controls. This SDD, when used in conjunction with the other elements of the definitive design package, provides a complete picture of the FPS for the CVD Facility.

  20. Proposed classification scale for radiological incidents and accidents

    International Nuclear Information System (INIS)

    2003-04-01

    The scale proposed in this report is intended to facilitate communication concerning the severity of incidents and accidents involving the exposure of human beings to ionising radiations. Like the INES, it comprises eight levels of severity and uses the same terms (accident, incident, anomaly, serious and major) for keeping the public and the media informed. In a radiological protection context, the severity of an event is considered as being directly proportional to the risk run by an individual (the probability of developing fatal or non-fatal health effects) following exposure to ionising radiation in an incident or accident situation. However for society, other factors have to be taken into account to determine severity. The severity scale proposed is therefore based on assessment of the individual radiological risk. A severity level corresponding to exposure of a member of the public in an incident or accident situation is determined on the basis of risk assessment concepts and methods derived from international consensus on dose/effect relationships for both stochastic and deterministic effects. The severity of all the possible exposure situations - worker exposure, collective exposure, potential exposure - is determined using a system of weighting in relation to situations involving members of the public. In the case of this scale, to indicate the severity of an event, it is proposed to make use of the most penalizing level of severity, comparing: - the severity associated with the probability of occurrence of deterministic effects and the severity associated with the probability of occurrence of stochastic effects, when the event gives rise to both types of risk; - the severity for members of the public and the severity for exposed workers, when both categories of individuals are involved; - the severity on the proposed radiological protection scale and that obtained using the INES, when radiological protection and nuclear safety aspects are associated with

  1. Summarization of Injury and Fatality Factors Involving Children and Youth in Grain Storage and Handling Incidents.

    Science.gov (United States)

    Issa, S F; Field, W E; Hamm, K E; Cheng, Y H; Roberts, M J; Riedel, S M

    2016-01-01

    This article summarizes data gathered on 246 documented cases of children and youth under the age of 21 involved in grain storage and handling incidents in agricultural workplaces from 1964 to 2013 in the U.S. that have been entered into the Purdue Agricultural Confined Space Incident Database. The database is the result of ongoing efforts to collect and file information on documented injuries, fatalities, and entrapments in all forms of agricultural confined spaces. While the frequency of injuries and fatalities involving children and youth in agriculture has decreased in recent years, incidents related to agricultural confined spaces, especially grain storage and handling facilities, have remained largely unchanged during the same period. Approximately 21% of all documented incidents involved children and youth (age 20 and younger), and more than 77% of all documented incidents were fatal, suggesting an under-reporting of non-fatal incidents. Findings indicate that the majority of youth incidents occurred at OSHA exempt agricultural worksites. The states reporting the most incidents were Indiana, Iowa, Nebraska, Illinois, and Minnesota. Grain transport vehicles represented a significant portion of incidents involving children under the age of 16. The overwhelming majority of victims were male, and most incidents (50%) occurred in June, October, and November. Recommendations include developing intervention strategies that target OSHA exempt farms, feedlots, and seed processing facilities; preparing engineering design and best practice standards that reduce the exposure of children and youth to agricultural confined spaces; and developing gender-specific safety resources that incorporate gender-sensitive strategies to communicate safety information to the population of young males with the greatest risk of exposure to the hazards of agricultural confined spaces.

  2. Influence of surface morphology and microstructure on performance of CVD tungsten coating under fusion transient thermal loads

    Energy Technology Data Exchange (ETDEWEB)

    Lian, Youyun, E-mail: lianyy@swip.ac.cn [Southwestern Institute of Physics, Chengdu (China); Liu, Xiang; Wang, Jianbao; Feng, Fan [Southwestern Institute of Physics, Chengdu (China); Lv, Yanwei; Song, Jiupeng [China National R& D Center for Tungsten Technology, Xiamen Tungsten Co. Ltd, 361026 Xiamen (China); Chen, Jiming [Southwestern Institute of Physics, Chengdu (China)

    2016-12-30

    Highlights: • Thick CVD-W coatingswere deposited at a rapid growth rate. • The polished CVD-W coatings have highly textured structure and exhibited a very strong preferred orientation. • The polished CVD tungsten coatings show superior thermal shock resistance as compared with that of the as-deposited coatings. • The crack formation of the polished CVD-W was almost suppressed at an elevated temperature. - Abstract: Thick tungsten coatings have been deposited by chemical vapor deposition (CVD) at a rapid growth rate. A series of tungsten coatings with different thickness and surface morphology were prepared. The surface morphology, microstructure and preferred orientation of the CVD tungsten coatings were investigated. Thermal shock analyses were performed by using an electron beam facility to study the influence of the surface morphology and the microstructure on the thermal shock resistance of the CVD tungsten coatings. Repetitive (100 pulses) ELMs-like thermal shock loads were applied at various temperatures between room temperature and 600 °C with pulse duration of 1 ms and an absorbed power density of up to 1 GW/m{sup 2}. The results of the tests demonstrated that the specific surface morphology and columnar crystal structure of the CVD tungsten have significant influence on the surface cracking threshold and crack propagation of the materials. The CVD tungsten coatings with a polished surface show superior thermal shock resistance as compared with that of the as-deposited coatings with a rough surface.

  3. Thermoluminescent properties of CVD diamond: applications to ionising radiation dosimetry; Proprietes thermoluminescentes du diamant CVD: applications a la dosimetrie des rayonnements ionisants

    Energy Technology Data Exchange (ETDEWEB)

    Petitfils, A

    2007-09-15

    Remarkable properties of synthetic diamond (human soft tissue equivalence, chemical stability, non-toxicity) make this material suitable for medical application as thermoluminescent dosimeter (TLD). This work highlights the interest of this material as radiotherapy TLD. In the first stage of this work, we looked after thermoluminescent (TL) and dosimetric properties of polycrystalline diamond made by Chemically Vapor Deposited (CVD) synthesis. Dosimetric characteristics are satisfactory as TLD for medical application. Luminescence thermal quenching on diamond has been investigated. This phenomenon leads to a decrease of dosimetric TL peak sensitivity when the heating rate increases. The second part of this work analyses the use of synthetic diamond as TLD in radiotherapy. Dose profiles, depth dose distributions and the cartography of an electron beam obtained with our samples are in very good agreement with results from an ionisation chamber. It is clearly shown that CVD) diamond is of interest to check beams of treatment accelerators. The use of these samples in a control of treatment with Intensity Modulated Radiation Therapy underlines good response of synthetic diamond in high dose gradient areas. These results indicate that CVD diamond is a promising material for radiotherapy dosimetry. (author)

  4. Association of BMI with risk of CVD mortality and all-cause mortality.

    Science.gov (United States)

    Kee, Chee Cheong; Sumarni, Mohd Ghazali; Lim, Kuang Hock; Selvarajah, Sharmini; Haniff, Jamaiyah; Tee, Guat Hiong Helen; Gurpreet, Kaur; Faudzi, Yusoff Ahmad; Amal, Nasir Mustafa

    2017-05-01

    To determine the relationship between BMI and risk of CVD mortality and all-cause mortality among Malaysian adults. Population-based, retrospective cohort study. Participants were followed up for 5 years from 2006 to 2010. Mortality data were obtained via record linkages with the Malaysian National Registration Department. Multiple Cox regression was applied to compare risk of CVD and all-cause mortality between BMI categories adjusting for age, gender and ethnicity. Models were generated for all participants, all participants the first 2 years of follow-up, healthy participants, healthy never smokers, never smokers, current smokers and former smokers. All fourteen states in Malaysia. Malaysian adults (n 32 839) aged 18 years or above from the third National Health and Morbidity Survey. Total follow-up time was 153 814 person-years with 1035 deaths from all causes and 225 deaths from CVD. Underweight (BMIBMI ≥30·0 kg/m2) was associated with a heightened risk of CVD mortality. Overweight (BMI=25·0-29·9 kg/m2) was inversely associated with risk of all-cause mortality. Underweight was significantly associated with all-cause mortality in all models except for current smokers. Overweight was inversely associated with all-cause mortality in all participants. Although a positive trend was observed between BMI and CVD mortality in all participants, a significant association was observed only for severe obesity (BMI≥35·0 kg/m2). Underweight was associated with increased risk of all-cause mortality and obesity with increased risk of CVD mortality. Therefore, maintaining a normal BMI through leading an active lifestyle and healthy dietary habits should continue to be promoted.

  5. Numerical modelling of MPA-CVD reactors with the discontinuous Galerkin finite element method

    Science.gov (United States)

    Houston, Paul; Sime, Nathan

    2017-07-01

    In this article we develop a fully self consistent mathematical model describing the formation of a hydrogen plasma in a microwave power assisted chemical vapour deposition (MPA-CVD) reactor employed for the manufacture of synthetic diamond. The underlying multi-physics model includes constituent equations for the background gas mass average velocity, gas temperature, electromagnetic field energy and plasma density. The proposed mathematical model is numerically approximated based on exploiting the discontinuous Galerkin finite element method. We demonstrate the practical performance of this computational approach on a variety of CVD reactor geometries for a range of operating conditions.

  6. Nucleation site in CVD graphene growth investigated by radiation-mode optical microscopy

    Science.gov (United States)

    Taira, Takanobu; Obata, Seiji; Saiki, Koichiro

    2017-05-01

    We investigate the graphene nucleation site in real space using radiation-mode optical microscopy (Rad-OM), which we have developed for the real-time observation of the graphene growth in chemical vapor deposition (CVD) conditions. We found the bright spot in the Rad-OM image worked as a nucleation site through continuous observation of a Cu substrate from pretreatment to graphene growth. The bright spot, considered as a C impurity, was effectively removed by Ar bombardment, which significantly reduced the nucleation density. The present result directly elucidates the role of C impurities and provides a means to grow single-crystalline and large-area graphene via CVD.

  7. AB006. Erectile dysfunction (ED) as a marker for cardiovascular diseases (CVD)

    Science.gov (United States)

    Torres, Luiz Otavio

    2015-01-01

    In 1973 V. Michal, a vascular surgeon said “Erectile dysfunction (ED) is related to diseases of the vascular bed”. And this makes sense since ED and cardiovascular diseases (CVD) share many risk factors like aging, obesity, inactivity, smoking, depression, dyslipidemia, hypertension, diabetes/insuline resistance. These conditions may lead to an oxidative stress which ultimately can promote vasoconstriction, thrombosis, atherosclerosis and finally ED and CVD. One of the most accepted Idea is that small vessels plug earlier, it means, small arteries when have for example 50% of obstruction will probably have a clinical manifestation before bigger arteries!

  8. Synthesis of crystalline Ge nanoclusters in PE-CVD-deposited SiO2 films

    DEFF Research Database (Denmark)

    Leervad Pedersen, T.P.; Skov Jensen, J.; Chevallier, J.

    2005-01-01

    The synthesis of evenly distributed Ge nanoclusters in plasma-enhanced chemical-vapour-deposited (PE-CVD) SiO2 thin films containing 8 at. % Ge is reported. This is of importance for the application of nanoclusters in semiconductor technology. The average diameter of the Ge nanoclusters can...

  9. The effect of percentage carbonon the CVD coating of plain carbon ...

    African Journals Online (AJOL)

    Two steels En 3 and En 39 were given a TiC-TiN CVD coating in the carburized and uncarburized conditions. The continuity of the coatings and their adherance to the substrate were examined. The thickness of the deposited coatings were also measured, their adherence to the substrate and their thickness was off ected by ...

  10. Photo-Hall measurements on phosphorus-doped n-type CVD diamond at low temperatures

    Czech Academy of Sciences Publication Activity Database

    Remeš, Zdeněk; Kalish, R.; Uzan-Saguy, C.; Baskin, E.; Nesládek, M.; Koizumi, S.

    2003-01-01

    Roč. 199, č. 1 (2003), s. 82-86 ISSN 0031-8965 EU Projects: European Commission(XE) HPRN-CT-1999-00139 Institutional research plan: CEZ:AV0Z1010914 Keywords : photo-Hall measurements * CVD diamonnd * phosphorus doped Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.950, year: 2003

  11. Computation of flow and thermal fields in a model CVD reactor

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    MS received 23 November 2001; revised 5 March 2002. Abstract. Mixing of coaxial jets within a tube in the presence of blockage has been numerically studied. This configuration is encountered during the modelling of flow and heat transfer in CVD (chemical vapour deposition) reactors. For the conditions prevailing in the ...

  12. Computation of flow and thermal fields in a model CVD reactor

    Indian Academy of Sciences (India)

    Mixing of coaxial jets within a tube in the presence of blockage has been numerically studied. This configuration is encountered during the modelling of flow and heat transfer in CVD (chemical vapour deposition) reactors. For the conditions prevailing in the reactor, the Reynolds numbers are low and flow can be taken to be ...

  13. Hydrogen termination of CVD diamond films by high-temperature annealing at atmospheric pressure

    NARCIS (Netherlands)

    Seshan, V.; Ullien, D.; Castellanos-Gomez, A.; Sachdeva, S.; Murthy, D.H.K.; Savenije, T.J.; Ahmad, H.A.; Nunney, T.S.; Janssens, S.D.; Haenen, K.; Nesládek, M.; Van der Zant, H.S.J.; Sudhölter, E.J.R.; De Smet, L.C.P.M.

    2013-01-01

    A high-temperature procedure to hydrogenate diamond films using molecular hydrogen at atmospheric pressure was explored. Undoped and doped chemical vapour deposited (CVD) polycrystalline diamond films were treated according to our annealing method using a H2 gas flow down to ?50 ml/min (STP) at

  14. Thermoluminescence properties of undoped diamond films deposited using HF CVD technique

    Directory of Open Access Journals (Sweden)

    Paprocki K.

    2018-03-01

    Full Text Available Natural diamond has been considered as a perspective material for clinical radiation dosimetry due to its tissuebiocompatibility and chemical inertness. However, the use of natural diamond in radiation dosimetry has been halted by the high market price. The recent progress in the development of CVD techniques for diamond synthesis, offering the capability of growing high quality diamond layers, has renewed the interest in using this material in radiation dosimeters having small geometricalsizes. Polycrystalline CVD diamond films have been proposed as detectors and dosimeters of β and α radiation with prospective applications in high-energy photon dosimetry. In this work, we present a study on the TL properties of undoped diamond film samples grown by the hot filament CVD (HF CVD method and exposed to β and α radiation. The glow curves for both types of radiation show similar character and can be decomposed into three components. The dominant TL peaks are centered at around 610 K and exhibit activation energy of the order of 0.90 eV.

  15. Terahertz and M4PP conductivity mapping of large area CVD grown graphene films

    DEFF Research Database (Denmark)

    Buron, Jonas Christian Due; Petersen, Dirch Hjorth; Bøggild, Peter

    We demonstrate mapping of magnitude and variation of the electrical conductance of large area CVD graphene films by terahertz time-domain spectroscopy (THz-TDS) and micro four-point-probe (M4PP). Non-trivial correlations between results obtained with the two techniques are discussed in relation...... to electrical properties of the graphene films....

  16. Optimization of CVD parameters for long ZnO NWs grown on ITO ...

    Indian Academy of Sciences (India)

    The optimization of chemical vapour deposition (CVD) parameters for long and vertically aligned (VA) ZnO nanowires (NWs) were investigated. Typical ZnO NWs as a single crystal grown on indium tin oxide (ITO)-coated glass substrate were successfully synthesized. First, the conducted side of ITO–glass substrate was ...

  17. The effect of alkaline doped catalysts on the CVD synthesis of carbon nanotubes

    DEFF Research Database (Denmark)

    Nemeth, Krisztian; Nemeth, Zoltan; Fejes, Dora

    2011-01-01

    The aim of this work was to develop new doped catalysts for chemical vapour deposition (CVD) synthesis in order to increase the quantity and quality of carbon nanotubes (CNTs). Doping compounds such as CsBr, CsCl, KBr and KCl were used to reach higher carbon deposit and carbon yield. The amount o...

  18. Control of Reaction Surface in Low Temperature CVD to Enhance Nucleation and Conformal Coverage

    Science.gov (United States)

    Kumar, Navneet

    2009-01-01

    The Holy Grail in CVD community is to find precursors that can afford the following: good nucleation on a desired substrate and conformal deposition in high AR features. Good nucleation is not only necessary for getting ultra-thin films at low thicknesses; it also offers films that are smooth at higher thickness values. On the other hand,…

  19. Ultrahigh-vacuum CVD Epitaxy of silicon and GexSi1-x

    Science.gov (United States)

    Racanelli, Marco; Greve, David W.

    1991-10-01

    The growth of epitaxial layers of germanium-silicon alloys is important for advanced semiconductor devices such as heterojunction bipolar transistors. This article explains the principles behind ultrahigh-vacuum chemical vapor deposition (UHV/CVD). This growth technique is capable of growing device-quality layers at low temperatures and, in addition, has a potential for high productivity in manufacturing.

  20. CVD growth and characterization of 3C-SiC thin films

    Indian Academy of Sciences (India)

    Unknown

    Cubic silicon carbide (3C-SiC) thin films were grown on (100) and (111) Si substrates by CVD technique using ... of grown films were studied using optical microscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis and X-ray ... the oxide mask gets damaged (Edgar et al 1998). There- fore, lower ...

  1. Optimization of CVD parameters for long ZnO NWs grown on ITO

    Indian Academy of Sciences (India)

    The optimization of chemical vapour deposition (CVD) parameters for long and vertically aligned (VA) ZnO nanowires (NWs) were investigated. Typical ZnO NWs as a single crystal grown on indium tin oxide (ITO)-coated glass substrate were successfully synthesized. First, the conducted side of ITO–glass substrate was ...

  2. An economic CVD technique for pure SnO2 thin films deposition ...

    Indian Academy of Sciences (India)

    A modified new method of CVD for formation of pure layers of tin oxide films was developed. This method is very simple and inexpensive and produces films with good electrical properties. The effect of substrate temperature on the sheet resistance, resistivity, mobility, carrier concentration and transparency of the films has ...

  3. An economic CVD technique for pure SnO 2 thin films deposition

    Indian Academy of Sciences (India)

    A modified new method of CVD for formation of pure layers of tin oxide films was developed. This method is very simple and inexpensive and produces films with good electrical properties. The effect of substrate temperature on the sheet resistance, resistivity, mobility, carrier concentration and transparency of the films has ...

  4. The integration of epigenetics and genetics in nutrition research for CVD risk factors

    Science.gov (United States)

    There is increasing evidence documenting gene-by-environment (G x E) interactions for CVD related traits. However, the underlying mechanisms are still unclear. DNA methylation may represent one of such potential mechanisms. The objective of this review paper is to summarise the current evidence supp...

  5. Thermodynamic and experimental studies of the CVD of A-15 superconductors. I

    International Nuclear Information System (INIS)

    Madar, R.; Weiss, F.; Fruchart, R.; Bernard, C.

    1978-01-01

    This paper deals with the experimental and thermodynamic study of the chemical vapor deposition (CVD) synthesis of Nb 3 Ga layers on various metallic and insulating substrates using the coreduction of mixed halides by hydrogen. Thermodynamic equilibrium in the seven-component system Nb-Ga-H-Cl-Si-O-Ar has been calculated using the method of minimization of the system Gibbs free energy as a function of the variables directly available in the CVD system. The chosen variables were the chloride ratio, the reduction and dilution parameters and the temperature of the deposition zone. The equilibrium compositions were calculated for the two composition limits of the A-15 phase: NbGasub(0.15) and Nb 3 Ga. They are presented in the form of CVD phase diagrams. A CVD reactor has been set up and more than one hundred measurements have been made in order to check the validity of the equilibrium calculations. The comparisons between equilibrium and experimental results show a good agreement and lead to a better understanding of the chemistry and thermodynamics of the system. (Auth.)

  6. Economic efficiency of primary care for CVD prevention and treatment in Eastern European countries

    Science.gov (United States)

    2013-01-01

    Background Cardiovascular disease (CVD) is the main cause of morbidity and mortality worldwide, but it also is highly preventable. The prevention rate mainly depends on the patients’ readiness to follow recommendations and the state’s capacity to support patients. Our study aims to show that proper primary care can decrease the CVD-related morbidity rate and increase the economic efficiency of the healthcare system. Since their admission to the European Union (EU), the Eastern European countries have been in a quest to achieve the Western European standards of living. As a representative Eastern European country, Romania implemented the same strategies as the rest of Eastern Europe, reflected in the health status and lifestyle of its inhabitants. Thus, a valid health policy implemented in Romania should be valid for the rest of the Eastern European countries. Methods Based on the data collected during the EUROASPIRE III Romania Follow Up study, the potential costs of healthcare were estimated for various cases over a 10-year time period. The total costs were split into patient-supported costs and state-supported costs. The state-supported costs were used to deduce the rate of patients with severe CVD that can be treated yearly. A statistical model for the evolution of this rate was computed based on the readiness of the patients to comply with proper primary care treatment. Results We demonstrate that for patients ignoring the risks, a severe CVD has disadvantageous economic consequences, leading to increased healthcare expenses and even poverty. In contrast, performing appropriate prevention activities result in a decrease of the expenses allocated to a (eventual) CVD. In the long-term, the number of patients with severe CVD that can be treated increases as the number of patients receiving proper primary care increases. Conclusions Proper primary care can not only decrease the risk of major CVD but also decrease the healthcare costs and increase the number of

  7. Continuous observation of polarization effects in thin SC-CVD diamond detector designed for heavy ion microbeam measurement

    Energy Technology Data Exchange (ETDEWEB)

    Kada, Wataru, E-mail: kada.wataru@gunma-u.ac.jp [Faculty of Science and Technology, Gunma University, 1-5-1 Tenjin-machi, Kiryu, Gunma 376-8515 (Japan); Iwamoto, Naoya [Quantum Beam Science Directorate, Japan Atomic Energy Agency, 1233 Watanuki-machi, Takasaki, Gunma 370-1292 (Japan); Satoh, Takahiro [Takasaki Advanced Radiation Research Institute, Japan Atomic Energy Agency, 1233 Watanuki-machi, Takasaki, Gunma 370-1292 (Japan); Onoda, Shinobu [Quantum Beam Science Directorate, Japan Atomic Energy Agency, 1233 Watanuki-machi, Takasaki, Gunma 370-1292 (Japan); Grilj, Veljko; Skukan, Natko [Ruđer Bošković Institute, P.O. Box 1016, 10001 Zagreb (Croatia); Koka, Masashi [Takasaki Advanced Radiation Research Institute, Japan Atomic Energy Agency, 1233 Watanuki-machi, Takasaki, Gunma 370-1292 (Japan); Ohshima, Takeshi [Quantum Beam Science Directorate, Japan Atomic Energy Agency, 1233 Watanuki-machi, Takasaki, Gunma 370-1292 (Japan); Jakšić, Milko [Ruđer Bošković Institute, P.O. Box 1016, 10001 Zagreb (Croatia); Kamiya, Tomihiro [Takasaki Advanced Radiation Research Institute, Japan Atomic Energy Agency, 1233 Watanuki-machi, Takasaki, Gunma 370-1292 (Japan)

    2014-07-15

    Continuous irradiation effects on a thin-film diamond detector were investigated for the utilization of these films as a detector for heavy ion microbeams. Temporal signal degradation in the energy spectrum was frequently observed during the focused heavy ion microbeam irradiation. To measure the temporal response to the each ion incidents, focused heavy ion microbeam with different beam fluence rates were irradiated to a single crystal (SC)-CVD diamond film detector with thickness of 50 μm. The responses to each ion were continuously observed and characterized by ion beam-induced charge (IBIC) measurement system. Heavy ions with short penetration path in diamond generate the large difference in mean path of electrons and holes, which is inverted by changing bias polarity. Signal degradation condition was relied on the bias polarity under the irradiation of heavy ions with short penetration length in the diamond. The continuous observation of IBIC signals revealed that temporal degradation in pulse height of signals, so called polarization effects, seems to be mainly caused by the hole trapping in this diamond crystal.

  8. Stereotactic body radiotherapy for medically inoperable patients with stage I non-small cell lung cancer - A first report of toxicity related to COPD/CVD in a non-randomized prospective phase II study

    International Nuclear Information System (INIS)

    Baumann, Pia; Nyman, Jan; Hoyer, Morten; Gagliardi, Giovanna; Lax, Ingmar; Wennberg, Berit; Drugge, Ninni; Ekberg, Lars; Friesland, Signe; Johansson, Karl-Axel; Lund, Jo-Asmund; Morhed, Elisabeth; Nilsson, Kristina; Levin, Nina; Paludan, Merete; Sederholm, Christer; Traberg, Anders; Wittgren, Lena; Lewensohn, Rolf

    2008-01-01

    Background and Aims: In a retrospective study using stereotactic body radiotherapy (SBRT) in medically inoperable patients with stage I NSCLC we previously reported a local control rate of 88% utilizing a median dose of 15 Gy x 3. This report records the toxicity encountered in a prospective phase II trial, and its relation to coexisting chronic obstructive pulmonary disease (COPD) and cardio vascular disease (CVD). Material and methods: Sixty patients were entered in the study between August 2003 and September 2005. Fifty-seven patients (T1 65%, T2 35%) with a median age of 75 years (59-87 years) were evaluable. The baseline mean FEV1% was 64% and median Karnofsky index was 80. A total dose of 45 Gy was delivered in three fractions at the 67% isodose of the PTV. Clinical, pulmonary and radiological evaluations were made at 6 weeks, 3, 6, 9, 12, 18, and 36 months post-SBRT. Toxicity was graded according to CTC v2.0 and performance status was graded according to the Karnofsky scale. Results: At a median follow-up of 23 months, 2 patients had relapsed locally. No grade 4 or 5 toxicity was reported. Grade 3 toxicity was seen in 12 patients (21%). There was no significant decline of FEV1% during follow-up. Low grade pneumonitis developed to the same extent in the CVD 3/17 (18%) and COPD 7/40 (18%) groups. The incidence of fibrosis was 9/17 (53%) and pleural effusions was 8/17 (47%) in the CVD group compared with 13/40 (33%) and 5/40 (13%) in the COPD group. Conclusion: SBRT for stage I NSCLC patients who are medically inoperable because of COPD and CVD results in a favourable local control rate with a low incidence of grade 3 and no grade 4 or 5 toxicity

  9. Is dairy product consumption associated with the incidence of CHD?

    Science.gov (United States)

    Avalos, Elisea E; Barrett-Connor, Elizabeth; Kritz-Silverstein, Donna; Wingard, Deborah L; Bergstrom, Jaclyn N; Al-Delaimy, Wael K

    2013-11-01

    Studies examining the association of dairy consumption with incident CHD have yielded inconsistent results. The current prospective study examined the association between dairy consumption and CHD in a population-based sample of older community-dwelling adults. Baseline CHD risk factors were assessed and an FFQ was self-administered. Participants were followed for morbidity and mortality with periodic clinic visits and annual mailed questionnaires for an average of 16?2 years, with a 96% follow-up rate for fatal and non-fatal CHD. Community. Participants were 751 men and 1008 women aged 50–93 years who attended a clinic visit in 1984–1987. At baseline the mean age was 70.6 (SD 9.8) years for men and 70.1 (SD 9.3) years for women. Participants who developed CHD during follow-up were significantly older (P cholesterol (P = 0.050), and were more likely to be male (P cholesterol and oestrogen use (in women) indicated that women who consumed low-fat cheese ‘sometimes/often’ and women who consumed non-fat milk ‘sometimes/often’ had an increased risk of incident CHD (hazard ratio 52.32; 95% CI 1.57, 3.41) and CHD (hazard ratio 51.48; 95% CI 1.02, 2.16) compared with women who ‘never/rarely’ ate these dairy products. Woman with higher intake of low-fat cheese and non-fat milk seem to have a higher risk of incident CHD. This needs further investigation considering recent evidence of cardiovascular benefits from certain dairy fat.

  10. Why simulations of colour for CVD observers might not be what they seem

    Science.gov (United States)

    Green, Phil

    2015-01-01

    A common task in universal design is to create a 'simulation' of the appearance of a colour image as it appears to a CVD observer. Although such simulations are useful in illustrating the particular problems that a CVD observer has in discriminating between colours in an image, it may not be reasonable to assume that such a simulation accurately conveys the experience of the CVD observer to an observer with normal vision. Two problems with this assumption are discussed here. First, it risks confusing appearance with sensation. A colour appearance model can more or less accurately predict the change in appearance of a colour when it is viewed under different conditions, but does not define the actual sensation. Such a sensation cannot be directly communicated but merely located on a scale with other related sensations. In practice we avoid this epistemological problem by asking observers to judge colour matches, relations and differences, none of which requires examination of the sensation itself. Since we do not truly know what sensation a normal observer experiences, it seems unscientific to suppose that we can do so for CVD observers. Secondly, and following from the above, the relation between stimulus and corresponding sensation is established as part of neural development during infancy, and while we can determine the stimulus we cannot readily determine what sensation the stimulus is mapped to, or what the available range of sensations is for a given observer. It is suggested that a similar range of sensations could be available to CVD observers as to normal observers.

  11. Superhydrophobic Copper Surfaces with Anticorrosion Properties Fabricated by Solventless CVD Methods.

    Science.gov (United States)

    Vilaró, Ignasi; Yagüe, Jose L; Borrós, Salvador

    2017-01-11

    Due to continuous miniaturization and increasing number of electrical components in electronics, copper interconnections have become critical for the design of 3D integrated circuits. However, corrosion attack on the copper metal can affect the electronic performance of the material. Superhydrophobic coatings are a commonly used strategy to prevent this undesired effect. In this work, a solventless two-steps process was developed to fabricate superhydrophobic copper surfaces using chemical vapor deposition (CVD) methods. The superhydrophobic state was achieved through the design of a hierarchical structure, combining micro-/nanoscale domains. In the first step, O 2 - and Ar-plasma etchings were performed on the copper substrate to generate microroughness. Afterward, a conformal copolymer, 1H,1H,2H,2H-perfluorodecyl acrylate-ethylene glycol diacrylate [p(PFDA-co-EGDA)], was deposited on top of the metal via initiated CVD (iCVD) to lower the surface energy of the surface. The copolymer topography exhibited a very characteristic and unique nanoworm-like structure. The combination of the nanofeatures of the polymer with the microroughness of the copper led to achievement of the superhydrophobic state. AFM, SEM, and XPS were used to characterize the evolution in topography and chemical composition during the CVD processes. The modified copper showed water contact angles as high as 163° and hysteresis as low as 1°. The coating withstood exposure to aggressive media for extended periods of time. Tafel analysis was used to compare the corrosion rates between bare and modified copper. Results indicated that iCVD-coated copper corrodes 3 orders of magnitude slower than untreated copper. The surface modification process yielded repeatable and robust superhydrophobic coatings with remarkable anticorrosion properties.

  12. Salivary Biomarkers of Chronic Psychosocial Stress and CVD Risks: A Systematic Review.

    Science.gov (United States)

    An, Kyungeh; Salyer, Jeanne; Brown, Roy E; Kao, Hsueh-Fen Sabrina; Starkweather, Angela; Shim, Insop

    2016-05-01

    The use of salivary biomarkers in stress research is increasing, and the precision and accuracy with which researchers are able to measure these biomarkers have dramatically improved. Chronic psychosocial stress is often linked to the pathogenesis of cardiovascular disease (CVD). Salivary biomarkers represent a noninvasive biological method of characterizing the stress phenomenon that may help to more fully describe the mechanism by which stress contributes to the pathogenesis and outcomes of CVD. We conducted a systematic review of 40 research articles to identify the salivary biomarkers researchers have most commonly used to help describe the biological impact of chronic psychosocial stress and explore its associations with CVD risk. We address strengths and weaknesses of specimen collection and measurement. We used PubMed, CINAHL, EBSCOhost, Web of Science, BIOSIS Previews, Biological Sciences (ProQuest), and Dissertations/Theses (ProQuest) to retrieve 387 initial articles. Once we applied our inclusion/exclusion criteria to specifically target adult human studies dealing with chronic stress rather than acute/laboratory-induced stress, 40 studies remained, which we synthesized using Preferred Reporting Items for Systematic Reviews and Meta-Analyses criteria. Cortisol was the biomarker used most frequently. Sources of psychosocial stress included job strain, low socioeconomic status, and environmental factors. Overall, psychosocial stress was associated with CVD risks such as vascular pathology (hypertension, blood pressure fluctuation, and carotid artery plaque) as well as metabolic factors such as abnormal blood glucose, dyslipidemia, and elevated cardiac enzymes. Diverse salivary biomarkers have been useful in stress research, particularly when linked to CVD risks. © The Author(s) 2015.

  13. Prevalence, circumstances and consequences of non-fatal road ...

    African Journals Online (AJOL)

    hefere

    multivariate logistic regression analysis found that residing in a rural area, taking medications or other treatment for ... falls and transport injuries (Kang, 2011; Mock, Abantanga, Cummings, & Koepsell, 1999). Cross-sectional survey ...... and delivery mechanisms in partnership with key stakeholders (Bliss & Breen, 2009).

  14. Consumption of Yogurt and the Incident Risk of Cardiovascular Disease: A Meta-Analysis of Nine Cohort Studies.

    Science.gov (United States)

    Wu, Lei; Sun, Dali

    2017-03-22

    Previous systematic reviews and meta-analyses have evaluated the association of dairy consumption and the risk of cardiovascular disease (CVD). However, the findings were inconsistent. No quantitative analysis has specifically assessed the effect of yogurt intake on the incident risk of CVD. We searched the PubMed and the Embase databases from inception to 10 January 2017. A generic inverse-variance method was used to pool the fully-adjusted relative risks (RRs) and the corresponding 95% confidence intervals (CIs) with a random-effects model. A generalized least squares trend estimation model was used to calculate the specific slopes in the dose-response analysis. The present systematic review and meta-analysis identified nine prospective cohort articles involving a total of 291,236 participants. Compared with the lowest category, highest category of yogurt consumption was not significantly related with the incident risk of CVD, and the RR (95% CI) was 1.01 (0.95, 1.08) with an evidence of significant heterogeneity (I² = 52%). However, intake of ≥200 g/day yogurt was significantly associated with a lower risk of CVD in the subgroup analysis. There was a trend that a higher level of yogurt consumption was associated with a lower incident risk of CVD in the dose-response analysis. A daily dose of ≥200 g yogurt intake might be associated with a lower incident risk of CVD. Further cohort studies and randomized controlled trials are still demanded to establish and confirm the observed association in populations with different characteristics.

  15. Boron-doped CVD diamond films. Part I. History, production and characterization; Filmes de diamante CVD dopado com boro. Parte I . Historico, producao e caracterizacao

    Energy Technology Data Exchange (ETDEWEB)

    Barros, Rita de Cassia Mendes de; Ribeiro, Mauro Celso; An-Sumodjo, Paulo Teng; Juliao, Murilo Sergio da Silva; Serrano, Silvia Helena Pires [Sao Paulo Univ., SP (Brazil). Inst. de Quimica]. E-mail: shps@iq.usp.br; Ferreira, Neidenei Gomes [Centro Tecnico Aeroespacial, Sao Jose dos Campos, SP (Brazil). Div. de Materiais

    2005-04-01

    This review presents a brief account concerning the production, characterization and evolution of the knowledge in the area of diamond and boron-doped diamond films. The most important methods used for the growth of these films, such as chemical vapor deposition and high pressure/high temperature systems, as well as the several kinds of reactors which can be employed are reviewed. However, larger emphasis is given to the CVD method. Morphological, structural and electric properties of these films, as well as their role in the performance of voltammetric electrodes for electrochemistry and electroanalytical chemistry are also discussed. (author)

  16. Dietary sodium to potassium ratio and the incidence of hypertension and cardiovascular disease: A population-based longitudinal study.

    Science.gov (United States)

    Mirmiran, Parvin; Bahadoran, Zahra; Nazeri, Pantea; Azizi, Fereidoun

    2018-01-30

    There is an interaction between dietary sodium/potassium intake in the pathogenesis of hypertension (HTN) and cardiovascular disease (CVD). The aim of this study was to investigate the association of dietary sodium to potassium (Na/K) ratio and the risk of HTN and CVD in a general population of Iranian adults. In this prospective cohort study, adults men and women with complete baseline data were selected from among participants of the Tehran Lipid and Glucose Study and were followed up for 6.3 years for incidence of HTN and CVD outcomes. Dietary sodium and potassium were assessed using a valid and reliable 168-item food frequency questionnaire. Cox proportional hazards regression models were used to estimate hazard ratios (HRs) and 95% confidence intervals (CIs) for the association between dietary sodium, potassium and their ratio and risk of outcomes. During the study follow-up, 291 (15.1%) and 79 (5.0%) new cases of HTN and CVD were identified, respectively. No significant association was observed between usual intakes of sodium, potassium and dietary Na/K ratio with the incidence of HTN. There was no significant association between dietary intakes of sodium and potassium per se and the risk of CVD, whereas when dietary sodium to potassium ratio was considered as exposure in the fully-adjusted Cox regression model, and participants in the highest compared to lowest tertile had a significantly increased risk of CVD (HR = 2.19, 95% CI = 1.16-4.14). Our findings suggest that high dietary Na/K ratio could contribute to increased risk of CVD events.

  17. Dairy products and its association with incidence of cardiovascular disease: the Malmö diet and cancer cohort.

    Science.gov (United States)

    Sonestedt, Emily; Wirfält, Elisabet; Wallström, Peter; Gullberg, Bo; Orho-Melander, Marju; Hedblad, Bo

    2011-08-01

    It is unclear whether specific dairy products are associated with risk of cardiovascular disease (CVD). The aim of this project was therefore to examine the association between intake of milk, cheese, cream and butter, and incidence of CVD in the Swedish Malmö Diet and Cancer cohort. Milk was separated into fermented (yoghurt and cultured sour milk) versus non-fermented milk, and low-fat versus high-fat milk. Among 26,445 individuals without a history of myocardial infarction, stroke and diabetes (44-74 years; 62% females), 2,520 CVD cases (coronary and stroke events) were identified during a mean follow-up time of 12 years. Dietary data was collected using a modified diet history method. Overall consumption of dairy products was inversely associated with risk of CVD (P (trend) = 0.05). Among the specific dairy products, a statistically significant inverse relationship was observed only for fermented milk. The highest versus lowest intake category of fermented milk was associated with 15% (95% CI: 5-24%; P (trend) = 0.003) decreased incidence of CVD. We observed a statistically significant interaction between sex and cheese intake (P = 0.046). Cheese intake was significantly associated with decreased CVD risk in women (P (trend) = 0.03), but not in men (P (trend) = 0.98). The main finding was that a high intake of fermented milk may reduce the risk of CVD. This study suggests that it is important to examine dairy products separately when investigating their health effects.

  18. Mediterranean Diet and 10-year (2002-2012) Incidence of Diabetes and Cardiovascular Disease in Participants with Prediabetes: The ATTICA study.

    Science.gov (United States)

    Filippatos, Theodosios D; Panagiotakos, Demosthenes B; Georgousopoulou, Ekavi N; Pitaraki, Evangelia; Kouli, Georgia-Maria; Chrysohoou, Christina; Tousoulis, Dimitrios; Stefanadis, Christodoulos; Pitsavos, Christos

    2016-01-01

    Prediabetes has been related to an increased risk of developing diabetes and cardiovascular disease (CVD). The aim of the present study was to examine the effect of the Mediterranean diet on diabetes and CVD risk in subjects with impaired fasting glucose (IFG, i.e. fasting plasma glucose 100-125 mg/dl). During 2001-2002, 3042 men and women (>18y) were enrolled for the study. The participants showed no clinical evidence of CVD or any other chronic disease, and were living in the greater Athens (Greece) area. In 2011 and 2012, the 10-year follow-up examinations were performed, including a working sample of n = 1875 participants without diabetes at baseline. Adherence to the Mediterranean diet at baseline evaluation was assessed using the MedDietScore (range 0-55). The prediabetic subjects (n = 343) had a significantly higher incidence of diabetes (25% vs. 10%, p Mediterranean diet compared with low adherence (p Mediterranean diet (>35/55 score) was associated with lower 10-year incidence of diabetes and CVD. In multiple logistic regression models, participants with high levels of adherence to the Mediterranean diet were significantly less affected by diabetes and CVD than those with low adherence levels. High adherence to the Mediterranean diet is associated with a low risk of developing diabetes and CVD in prediabetic subjects.

  19. Circulating N-Linked Glycoprotein Side-Chain Biomarker, Rosuvastatin Therapy, and Incident Cardiovascular Disease: An Analysis From the JUPITER Trial.

    Science.gov (United States)

    Akinkuolie, Akintunde O; Glynn, Robert J; Padmanabhan, Latha; Ridker, Paul M; Mora, Samia

    2016-07-13

    GlycA, a novel protein glycan biomarker of N-acetyl side chains of acute-phase proteins, was recently associated with incident cardiovascular disease (CVD) in healthy women. Whether GlycA predicts CVD events in the setting of statin therapy in men and women without CVD but with evidence of chronic inflammation is unknown. In the Justfication for the Use of Statins in Prevention: an Intervention Trial Evaluating Rosuvastatin (JUPITER) trial (NCT00239681), participants with low-density lipoprotein cholesterol 0.20). In the JUPITER trial, increased levels of GlycA were associated with an increased risk of CVD events independent of traditional risk factors and hsCRP. URL: http://www.clinicaltrials.gov. Unique identifier: NCT00239681. © 2016 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

  20. Higher plasma soluble Receptor for Advanced Glycation End Products (sRAGE) levels are associated with incident cardiovascular disease and all-cause mortality in type 1 diabetes

    DEFF Research Database (Denmark)

    Nin, Johanna W M; Jorsal, Anders; Ferreira, Isabel

    2010-01-01

    To investigate the associations of plasma levels of soluble receptor for advanced glycation end products (sRAGE) with incident cardiovascular disease (CVD) and all-cause mortality in type 1 diabetes and the extent to which any such associations could be explained by endothelial and renal dysfunct......To investigate the associations of plasma levels of soluble receptor for advanced glycation end products (sRAGE) with incident cardiovascular disease (CVD) and all-cause mortality in type 1 diabetes and the extent to which any such associations could be explained by endothelial and renal...

  1. Temperature dependence of stress in CVD diamond films studied by Raman spectroscopy

    Directory of Open Access Journals (Sweden)

    Dychalska Anna

    2015-09-01

    Full Text Available Evolution of residual stress and its components with increasing temperature in chemical vapor deposited (CVD diamond films has a crucial impact on their high temperature applications. In this work we investigated temperature dependence of stress in CVD diamond film deposited on Si(100 substrate in the temperature range of 30 °C to 480 °C by Raman mapping measurement. Raman shift of the characteristic diamond band peaked at 1332 cm-1 was studied to evaluate the residual stress distribution at the diamond surface. A new approach was applied to calculate thermal stress evolution with increasing tempera­ture by using two commonly known equations. Comparison of the residts obtained from the two methods was presented. The intrinsic stress component was calculated from the difference between average values of residual and thermal stress and then its temperature dependence was discussed.

  2. Natural and CVD type diamond detectors as dosimeters in hadrontherapy applications

    International Nuclear Information System (INIS)

    Cirrone, G.A.P.; Cuttone, G.; Rafaele, L.; Sabini, M.G.; De Angelis, C.; Onori, S.; Pacilio, M.; Bucciolini, M.; Bruzzi, M.; Sciortino, S.

    2003-01-01

    Diamond is potentially a suitable material for use as radiation dosimeter; the wide band gap results in low dark currents and low sensitivity to visible light, the high carrier mobility can give rapid response, the very high density of strong bonds in the crystal structure make diamond very resistant to radiation damage; moreover it is tissue equivalent. The more recent advances in the synthesis of polycrystalline diamond by chemical vapour deposition (CVD) techniques have allowed the synthesis of material with electronic properties suitable for dosimetric application. In this paper we will report the results obtained in the study of the response of a natural diamond dosimeter and a CVD one irradiated with 62 AMeV proton beams to demonstrate their possible application in protontherapy

  3. Chemical Properties of Carbon Nanotubes Prepared Using Camphoric Carbon by Thermal-CVD

    International Nuclear Information System (INIS)

    Azira, A. A.; Rusop, M.

    2010-01-01

    Chemical properties and surface study on the influence of starting carbon materials by using thermal chemical vapor deposition (Thermal-CVD) to produced carbon nanotubes (CNTs) is investigated. The CNTs derived from camphor were synthesized as the precursor material due to low sublimation temperature. The major parameters are also evaluated in order to obtain high-yield and high-quality CNTs. The prepared CNTs are examined using field emission scanning electron microscopy (FESEM) to determine the microstructure of nanocarbons. The FESEM investigation of the CNTs formed on the support catalysts provides evidence that camphor is suitable as a precursor material for nanotubes formation. The chemical properties of the CNTs were conducted using FTIR spectroscopy and PXRD analysis. The high-temperature graphitization process induced by the Thermal-CVD enables the hydrocarbons to act as carbon sources and changes the aromatic species into the layered graphite structure of CNTs.

  4. Hard Coat Layers by PE-CVD Process for the Top Surface of Touch Panel

    International Nuclear Information System (INIS)

    Okunishi, T; Sato, N; Yazawa, K

    2013-01-01

    In order to protect surface from damages, the high pencil hardness and the high abrasion resistance are required for the hard coat layers on polyethylene telephthalate (PET) films for the application of touch panel surface. We have already found that the UV-curing-hard-coat-polymer (UHP) coated PET films show the poor abrasion resistance, while they have the high pencil hardness. It reveals that the abrasion resistance of hard coat layers of the UHP is not simply dependent on the pencil hardness. In this work, we have studied to improve the abrasion resistance of SiOC films as hard coat layers, which were formed by PE-CVD process on UHP coated PET. The abrasion resistance was evaluated by Taber abrasion test. PE-CVD hard coat layers which formed on UHP coater PET films have showed the better abrasion resistance and have the possibility of substitution to the thin glass sheets for touch panel application.

  5. Pulse-height defect in single-crystal CVD diamond detectors

    Energy Technology Data Exchange (ETDEWEB)

    Beliuskina, O.; Imai, N. [The University of Tokyo, Center for Nuclear Study, Wako, Saitama (Japan); Strekalovsky, A.O.; Aleksandrov, A.A.; Aleksandrova, I.A.; Ilich, S.; Kamanin, D.V.; Knyazheva, G.N.; Kuznetsova, E.A.; Mishinsky, G.V.; Pyatkov, Yu.V.; Strekalovsky, O.V.; Zhuchko, V.E. [JINR, Flerov Laboratory of Nuclear Reactions, Dubna, Moscow Region (Russian Federation); Devaraja, H.M. [Manipal University, Manipal Centre for Natural Sciences, Manipal, Karnataka (India); Heinz, C. [II. Physikalisches Institut, Justus-Liebig-Universitaet Giessen, Giessen (Germany); Heinz, S. [II. Physikalisches Institut, Justus-Liebig-Universitaet Giessen, Giessen (Germany); GSI Helmholtzzentrum fuer Schwerionenforschung, Darmstadt (Germany); Hofmann, S.; Kis, M.; Kozhuharov, C.; Maurer, J.; Traeger, M. [GSI Helmholtzzentrum fuer Schwerionenforschung, Darmstadt (Germany); Pomorski, M. [CEA, LIST, Diamond Sensor Laboratory, CEA/Saclay, Gif-sur-Yvette (France)

    2017-02-15

    The pulse-height versus deposited energy response of a single-crystal chemical vapor deposition (scCVD) diamond detector was measured for ions of Ti, Cu, Nb, Ag, Xe, Au, and of fission fragments of {sup 252} Cf at different energies. For the fission fragments, data were also measured at different electric field strengths of the detector. Heavy ions have a significant pulse-height defect in CVD diamond material, which increases with increasing energy of the ions. It also depends on the electrical field strength applied at the detector. The measured pulse-height defects were explained in the framework of recombination models. Calibration methods known from silicon detectors were modified and applied. A comparison with data for the pulse-height defect in silicon detectors was performed. (orig.)

  6. Electrochemical delamination of CVD-grown graphene film: toward the recyclable use of copper catalyst.

    Science.gov (United States)

    Wang, Yu; Zheng, Yi; Xu, Xiangfan; Dubuisson, Emilie; Bao, Qiaoliang; Lu, Jiong; Loh, Kian Ping

    2011-12-27

    The separation of chemical vapor deposited (CVD) graphene from the metallic catalyst it is grown on, followed by a subsequent transfer to a dielectric substrate, is currently the adopted method for device fabrication. Most transfer techniques use a chemical etching method to dissolve the metal catalysts, thus imposing high material cost in large-scale fabrication. Here, we demonstrate a highly efficient, nondestructive electrochemical route for the delamination of CVD graphene film from metal surfaces. The electrochemically delaminated graphene films are continuous over 95% of the surface and exhibit increasingly better electronic quality after several growth cycles on the reused copper catalyst, due to the suppression of quasi-periodical nanoripples induced by copper step edges. The electrochemical delamination process affords the advantages of high efficiency, low-cost recyclability, and minimal use of etching chemicals.

  7. Mindfulness-Based Interventions for Weight Loss and CVD Risk Management.

    Science.gov (United States)

    Fulwiler, Carl; Brewer, Judson A; Sinnott, Sinead; Loucks, Eric B

    2015-10-01

    Obesity affects more than one-third of U.S. adults and is a major cause of preventable morbidity and mortality, primarily from cardiovascular disease. Traditional behavioral interventions for weight loss typically focus on diet and exercise habits and often give little attention to the role of stress and emotions in the initiation and maintenance of unhealthy behaviors, which may account for their modest results and considerable variability in outcomes. Stress eating and emotional eating are increasingly recognized as important targets of weight loss interventions. Mindfulness-based interventions were specifically developed to promote greater self-efficacy in coping with stress and negative emotions, and appear to be effective for a variety of conditions. In recent years researchers have begun to study mindfulness interventions for weight loss and CVD risk management. This review describes the rationale for the use of mindfulness in interventions for weight loss and CVD risk management, summarizes the research to date, and suggests priorities for future research.

  8. Metal catalyst in CVD growth of carbon nanotubes: role of chemical composition

    Science.gov (United States)

    Yazyev, Oleg V.; Pasquarello, Alfredo

    2010-01-01

    Using first principles methods, we systematically study the crucial steps of CVD growth of CNTs, the binding and the diffusion of the carbon feedstock as well as the nucleation of CNTs. Late transition (Ni, Pd, Pt) and coinage (Cu, Ag, Au) metal catalysts were investigated. For all metals, we considered various diffusion mechanisms including both surface and subsurface channels, finding the lowest activation barriers for carbon adatoms on nanoparticles of coinage metals. For these metals, our calculations further show that the diffusion is restricted to the nanoparticle surface when diatomic carbon is initially obtained from the decomposition of the precursor gas. From the binding energies of armchair and zigzag edges of CNT fragments, we infer a high preference for the growth of armchair CNTs. These results indicate that coinage metal catalysts, in particular Cu, favor CVD growth of CNTs at low temperatures and with narrow chirality distributions.

  9. Comparative study of dlc coatings by pvd against cvd technique on textile dents

    International Nuclear Information System (INIS)

    Malik, M.; Alam, S.; Iftikhar, F.

    2007-01-01

    Diamond like Carbon (DLC) film is a hard amorphous carbon hydride film formed by Physical or Chemical vapor deposition (PVD or CVD) techniques. Due to its unique properties especially high hardness, lower coefficient of friction and lubricious nature, these coatings are not only used to extend the life of cutting tools but also for non cutting applications such as for forming dies, molds and on many functional parts of textile. In the present work two techniques were employed i.e. PVD and CVD for deposition of diamond like carbon film on textile dents. These dents are used as thread guider in high speed weaving machine. The measurement of coating thickness, adhesion, hardness and roughness values indicates that overall properties of DLC coating developed by PVD LARC technology reduces abrasion and increases the workability and durability of textile dents as well as suppress the need of lubricants. (author)

  10. Plasma CVD reactor with two-microwave oscillators for diamond film synthesis

    International Nuclear Information System (INIS)

    Nagatsu, M.; Miyake, M.; Maeda, J.

    2006-01-01

    In this study, we present the experimental results of a new type of microwave plasma CVD system, where two of 1.5 kW microwave sources were used for enlarging the plasma discharge and the diamond film growth. One of the microwave oscillators was used to produce the microwave plasma as in the conventional microwave plasma CVD device, while the second one was used to enlarge the plasma by introducing microwave from the launcher mounted at the substrate stage. We demonstrated the enlargement of plasma discharge area from 60 mm to 100 mm in diameter by using the two-microwave oscillators system. Characteristics of diamond films deposited using H 2 /CH 4 plasmas were also investigated using a scanning electron microscope (SEM) and Raman spectroscopy

  11. Exploring carrier transport phenomena in a CVD-assembled graphene FET on hexagonal boron nitride.

    Science.gov (United States)

    Kim, Edwin; Jai, Nikhil; Jacobs-Gedri, Robin; Xu, Yang; Yu, Bin

    2012-03-30

    The supporting substrate plays a crucial role in preserving the superb electrical characteristicsof an atomically thin 2D carbon system. We explore carrier transport behavior in achemical-vapor-deposition- (CVD-) assembled graphene monolayer on hexagonal boron nitride (h-BN) substrate. Graphene-channel field-effect transistors (GFETs) were fabricated on ultra-thin h-BN multilayers to screen out carrier scattering from the underlying SiO2 substrate. To explore the transport phenomena, we use three different approaches to extract carrier mobility, namely, effective carrier mobility (μFE), intrinsic carrier mobility (μ), and field-effect mobility (μFE). A comparative study has been conducted based on the electrical characterization results, uncovering the impacts of supporting substrate material and device geometry scaling on carrier mobility in GFETs with CVD-assembled graphene as the active channel.

  12. Diameter Tuning of Single-Walled Carbon Nanotubes by Diffusion Plasma CVD

    Directory of Open Access Journals (Sweden)

    Toshiaki Kato

    2011-01-01

    Full Text Available We have realized a diameter tuning of single-walled carbon nanotubes (SWNTs by adjusting process gas pressures with plasma chemical vapor deposition (CVD. Detailed photoluminescence measurements reveal that the diameter distribution of SWNTs clearly shifts to a large-diameter region with an increase in the pressure during plasma CVD, which is also confirmed by Raman scattering spectroscopy. Based on the systematical investigation, it is found that the main diameter of SWNTs is determined by the pressure during the heating in an atmosphere of hydrogen and the diameter distribution is narrowed by adjusting the pressure during the plasma generation. Our results could contribute to an application of SWNTs to high-performance thin-film transistors, which requires the diameter-controlled semiconductor-rich SWNTs.

  13. A Review of the Properties and CVD Synthesis of Coiled Carbon Nanotubes

    Directory of Open Access Journals (Sweden)

    Dóra Fejes

    2010-04-01

    Full Text Available The CVD route for carbon nanotube production has become a popular method to make large amounts of multiwall carbon nanotubes. The structure, morphology and size of carbon materials depend critically on the catalyst preparation and deposition conditions. According to current knowledge, CVD method is the only process which can produce carbon nanocoils. These nanocoils are perfect candidates for nanotechnology applications. One might indeed hope that these coils would have the extraordinary stiffness displayed by straight nanotubes. Based on theoretical studies, regular coiled nanotubes exhibit exceptional mechanical, electrical, and magnetic properties due to the combination of their peculiar helical morphology and the fascinating properties of nanotubes. In spite of its technological interest, relatively low attention has been paid to this special field. In this paper we attempt to summarize results obtained until now.

  14. The effect of three different diets on risk factors for CVD. With focus on whole grain

    DEFF Research Database (Denmark)

    Christoffersen, Tenna

    2009-01-01

    of Life Sciences, University of Copenhagen, from January 2004-2007. WG intake was estimated based on collected information of WG content of the foods, consumed during the 6 month. Results: The MUFA diet resulted in a sigificantly improvement of fasting insulin levels (p=0.027) and insulin resistance......Background: More intervention studies are needed to clarify the effect of diets different in types and amounts of fats and carbohydrates on risk factors for cardiovascular disease (CVD), as well as to clarify a possible beneficial effect of whole grain (WG) intake. Objective: The aim...... was to investigate the effect of three ad libitum diets; MUFA: moderate-fat (40E%) with 20E% MonoUnsaturated-Fatty-Acids, LF: Low Fat (25E%), and ConTRol: CTR (35E% fat), all different in glycemic index, on risk factors for CVD, including body weight (BW) and –composition, insulin resistance, plasma lipids, high...

  15. Board diversity and corporate voluntary disclosure (CVD in the annual reports of Bangladesh

    Directory of Open Access Journals (Sweden)

    Md. Abdur Rouf

    2016-10-01

    Full Text Available This is an exploratory study designed to investigate the extant and nature of corporate voluntary disclosure (CVD in corporate annual reports of Bangladesh. Specifically, examine the relationship between board diversity and corporate voluntary disclosures. The paper is based on a sample of 106 listed non-financial companies in Dhaka Stock Exchanges (DSE from the period 2007-2011 and all the companies are selected by Judgment Sampling. The study is used ordinary least squares regression model to examine the relationship between explanatory variables and voluntary disclosure. Using an unweighted relative disclosure index for measuring voluntary disclosure, the empirical results indicate that Percentage Female Director (PFD, Board Leadership Structure (BLS and Total Assets (TA are positively association with corporate voluntary disclosure (CVD. In contrast, the extent of corporate voluntary disclosure is negatively associated with a Percentage of equity owned by the insiders to all equity of the firm higher management ownership

  16. The incidence and prevalence of diabetes mellitus and related atherosclerotic complications in Korea: a National Health Insurance Database Study.

    Directory of Open Access Journals (Sweden)

    Bo Kyung Koo

    Full Text Available The incidence and prevalence of type 2 diabetes mellitus (T2DM and related macrovascular complications in Korea were estimated using the Health Insurance Review and Assessment (HIRA database from 2007-2011, which covers the claim data of 97.0% of the Korean population.T2DM, coronary artery disease (CAD, cerebrovascular disease (CVD, and peripheral artery disease (PAD were defined according to ICD-10 codes. We used the Healthcare Common Procedure Coding System codes provided by HIRA to identify associated procedures or surgeries. When calculating incidence, we excluded cases with preexisting T2DM within two years before the index year. A Poisson distribution was assumed when calculating 95% confidence intervals for prevalence and incidence rates.The prevalence of T2DM in Korean adults aged 20-89 years was 6.1-6.9% and the annual incidence rates of T2DM ranged from 9.5-9.8/1,000 person-year (PY during the study period. The incidence rates of T2DM in men and women aged 20-49 years showed decreasing patterns from 2009 to 2011 (P<0.001; by contrast, the incidence in subjects aged 70-79 years showed increased patterns from 2009 to 2011 (P<0.001. The incidence rates of CAD and CVD in patients newly diagnosed with T2DM were 18.84/1,000 PY and 11.32/1,000 PY, respectively, in the year of diagnosis. Among newly diagnosed individuals with T2DM who were undergoing treatment for PAD, 14.6% underwent angioplasty for CAD during the same period.Our study measured the national incidences of T2DM, CAD, CVD, and PAD, which are of great concern for public health. We also confirmed the relatively higher risk of CAD and CVD newly detected T2DM patients compared to the general population in Korea.

  17. Cold Vacuum Dryer (CVD) Facility Security System Design Description. System 54

    International Nuclear Information System (INIS)

    WHITEHURST, R.

    2000-01-01

    This system design description (SDD) addresses the Cold Vacuum Drying (CVD) Facility security system. The system's primary purpose is to provide reasonable assurance that breaches of security boundaries are detected and assessment information is provided to protective force personnel. In addition, the system is utilized by Operations to support reduced personnel radiation goals and to provide reasonable assurance that only authorized personnel are allowed to enter designated security areas

  18. Mediators and Moderators of Dementia Caregiver Depression and CVD Risk Outcomes in the Pleasant Events Program

    OpenAIRE

    Ho, Jennefer S.

    2016-01-01

    Rationale: Alzheimer’s disease caregivers demonstrate significant elevations in depression compared with noncaregivers. Addressing caregiver depression is of high public health importance due to its ties with overall wellbeing, increased risk for cardiovascular diseases (CVD), and ability to sustain caregiving duties. Improving caregiver mental and physical health may not only decrease healthcare costs, but it may also delay institutionalization of Alzheimer’s disease patients. Despite existi...

  19. Low temperature diamond growth by linear antenna plasma CVD over large area

    Czech Academy of Sciences Publication Activity Database

    Ižák, Tibor; Babchenko, Oleg; Varga, Marián; Potocký, Štěpán; Kromka, Alexander

    2012-01-01

    Roč. 249, č. 12 (2012), s. 2600-2603 ISSN 0370-1972 R&D Projects: GA ČR(CZ) GBP108/12/G108 Institutional research plan: CEZ:AV0Z10100522 Keywords : activation energy * growth kinetics * linear antenna microwave CVD * low temperature * polycrystalline diamond films Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.489, year: 2012 http://onlinelibrary.wiley.com/doi/10.1002/pssb.201200103/abstract

  20. Growth and characterization of nanodiamond layers prepared using plasma enhanced linear antennas microwave CVD system

    Czech Academy of Sciences Publication Activity Database

    Fendrych, František; Taylor, Andrew; Peksa, Ladislav; Kratochvílová, Irena; Vlček, J.; Řezáčová, V.; Petrák, V.; Kluiber, Z.; Fekete, Ladislav; Liehr, M.; Nesládek, M.

    2010-01-01

    Roč. 43, č. 37 (2010), 374018/1-374018/6 ISSN 0022-3727 R&D Projects: GA AV ČR KAN200100801; GA AV ČR KAN300100801; GA AV ČR KAN301370701 Institutional research plan: CEZ:AV0Z10100520 Keywords : nanodiamond, * thin films * PE MW CVD * linear antennas Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.105, year: 2010

  1. Nanocrystalline sp{sup 2} and sp{sup 3} carbons: CVD synthesis and applications

    Energy Technology Data Exchange (ETDEWEB)

    Terranova, M. L. [Università degli Studi di Roma “Tor Vergata,” via Della Ricerca Scientifica, Dipartimento di Scienze e Tecnologie Chimiche—MinimaLab (Italy); Rossi, M. [Università degli Studi di Roma “Sapienza,” via A. Scarpa, Dipartimento di Scienze di Base e Applicate per l’Ingegneria and Centro di Ricerca per le Nanotecnologie Applicate all’Ingegneria (CNIS) (Italy); Tamburri, E., E-mail: emanuela.tamburri@uniroma2.it [Università degli Studi di Roma “Tor Vergata,” via Della Ricerca Scientifica, Dipartimento di Scienze e Tecnologie Chimiche—MinimaLab (Italy)

    2016-11-15

    The design and production of innovative materials based on nanocrystalline sp{sup 2}- and sp{sup 3}-coordinated carbons is presently a focus of the scientific community. We present a review of the nanostructures obtained in our labs using a series of synthetic routes, which make use of chemical vapor deposition (CVD) techniques for the selective production of non-planar graphitic nanostructures, nanocrystalline diamonds, and hybrid two-phase nanostructures.

  2. A 3D tomographic EBSD analysis of a CVD diamond thin film

    Directory of Open Access Journals (Sweden)

    Tao Liu, Dierk Raabe and Stefan Zaefferer

    2008-01-01

    Full Text Available We have studied the nucleation and growth processes in a chemical vapor deposition (CVD diamond film using a tomographic electron backscattering diffraction method (3D EBSD. The approach is based on the combination of a focused ion beam (FIB unit for serial sectioning in conjunction with high-resolution EBSD. Individual diamond grains were investigated in 3-dimensions particularly with regard to the role of twinning.

  3. Preparación de tamices moleculares de carbono por CVD

    OpenAIRE

    Manso, R.; Pajares, J. A.; Albiniak, A.; Broniek, E.; Siemieniewska, T.

    2001-01-01

    Carbon molecular sieves (CMS) have been prepared by chemical vapour deposition (CVD) of carbon from the pyrolysis of benzene molecules on activated carbon surfaces. The pyrolysis of benzene at temperatures in the range 650-850 ºC restricts the accessibility of the micropores due to the creation of constrictions on the microporous network. Temperatures higher than 850 ºC (temperature of carbonisation) add difficulties due to decomposition and sinterization processes. Low flows of nitrogen (30 ...

  4. Growth of carbon allotropes and plasma characterization in linear antenna microwave plasma CVD system

    Czech Academy of Sciences Publication Activity Database

    Potocký, Štěpán; Babchenko, Oleg; Davydova, Marina; Ižák, Tibor; Čada, Martin; Kromka, Alexander

    2014-01-01

    Roč. 53, č. 5 (2014), "05FP04-1"-"05FP04-3" ISSN 0021-4922 R&D Projects: GA TA ČR TA01011740; GA ČR GAP205/12/0908 Grant - others:AVČR(CZ) M100100902 Institutional support: RVO:68378271 Keywords : antenna linear * CVD system * plasma Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 1.127, year: 2014

  5. Plasma Nitrate and Incidence of Cardiovascular Disease and All-Cause Mortality in the Community: The Framingham Offspring Study.

    Science.gov (United States)

    Maas, Renke; Xanthakis, Vanessa; Göen, Thomas; Müller, Johannes; Schwedhelm, Edzard; Böger, Rainer H; Vasan, Ramachandran S.

    2017-11-18

    Nitrate is a dietary component as well as an endogenously formed metabolite and source of the signaling molecule nitric oxide. Harmful as well as beneficial effects of nitrate have been advocated. Data regarding the prognostic relevance of plasma nitrate are limited. The aim of this study was to evaluate the prospective association of plasma nitrate with cardiovascular disease (CVD) and all-cause mortality. We assayed plasma nitrate in 2855 Framingham Offspring Study participants (mean age 59 years, 54% women) by gas chromatography-mass spectrometry and evaluated its association with all-cause mortality and incident CVD. On follow-up (median 17.3 years), 775 participants died and 522 developed new-onset CVD (of 2546 participants free of CVD at baseline). In multivariable models adjusting for standard risk factors, plasma nitrate was associated with an increased risk of death in participants (hazard ratio per unit increase in log-nitrate 1.21; 95% confidence interval, 1.04-1.40 [ P =0.015]). The strength of the association was attenuated by additional adjustment for estimated glomerular filtration rate (hazard ratio, 1.16; 95% confidence interval, 1.00-1.35 [ P =0.057]). In contrast, no evidence was found for an association of plasma nitrate with incident CVD (multivariable-adjusted hazard ratio per unit increase log-nitrate 1.08; 95% confidence interval, 0.89-1.31 [ P =0.42]). In our prospective community-based investigation, a higher plasma nitrate concentration was associated with all-cause mortality but not with incident CVD. The association of nitrate with mortality may at least in part be attributable to its association with renal function. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

  6. Crystalline silicon thin film growth by ECR plasma CVD for solar cells

    International Nuclear Information System (INIS)

    Licai Wang

    1999-07-01

    This thesis describes the background, motivation and work carried out towards this PhD programme entitled 'Crystalline Silicon Thin Film Growth by ECR Plasma CVD for Solar Cells'. The fundamental principles of silicon solar cells are introduced with a review of silicon thin film and bulk solar cells. The development and prospects for thin film silicon solar cells are described. Some results of a modelling study on thin film single crystalline solar cells are given which has been carried out using a commercially available solar cell simulation package (PC-1D). This is followed by a description of thin film deposition techniques. These include Chemical Vapour Deposition (CVD) and Plasma-Assisted CVD (PACVD). The basic theory and technology of the emerging technique of Electron Cyclotron Resonance (ECR) PACVD, which was used in this research, are introduced and the potential advantages summarised. Some of the basic methods of material and cell characterisation are briefly described, together with the work carried out in this research. The growth by ECR PACVD at temperatures 2 illumination. The best efficiency in the ECR grown structures was 13.76% using an epitaxial emitter. Cell performance was analysed in detail and the factors controlling performance identified by fitting self-consistently the fight and dark current-voltage and spectral response data using PC-1D. Finally, the conclusions for this research and suggestions for further work are outlined. (author)

  7. A CVD Diamond Detector for (n,a) Cross-Section Measurements

    CERN Document Server

    Weiss, Christina; Griesmayer, Erich; Guerrero, Carlos

    A novel detector based on the chemical vapor deposition (CVD) diamond technology has been developed in the framework of this PhD, for the experimental determination of (n,a) cross-sections at the neutron time-of-flight facility n_TOF at CERN. The 59Ni(n,a)56Fe cross-section, which is relevant for astrophysical questions as well as for risk-assessment studies in nuclear technology, has been measured in order to validate the applicability of the detector for such experiments. The thesis is divided in four parts. In the introductory part the motivation for measuring (n,a) cross-sections, the experimental challenges for such measurements and the reasons for choosing the CVD diamond technology for the detector are given. This is followed by the presentation of the n_TOF facility, an introduction to neutron-induced nuclear reactions and a brief summary of the interaction of particles with matter. The CVD diamond technology and the relevant matters related to electronics are given as well in this first part of the t...

  8. Study of CVD diamond layers with amorphous carbon admixture by Raman scattering spectroscopy

    Directory of Open Access Journals (Sweden)

    Dychalska Anna

    2015-12-01

    Full Text Available Raman spectroscopy is a most often used standard technique for characterization of different carbon materials. In this work we present the Raman spectra of polycrystalline diamond layers of different quality, synthesized by Hot Filament Chemical Vapor Deposition method (HF CVD. We show how to use Raman spectroscopy for the analysis of the Raman bands to determine the structure of diamond films as well as the structure of amorphous carbon admixture. Raman spectroscopy has become an important technique for the analysis of CVD diamond films. The first-order diamond Raman peak at ca. 1332 cm−1 is an unambiguous evidence for the presence of diamond phase in the deposited layer. However, the existence of non-diamond carbon components in a CVD diamond layer produces several overlapping peaks in the same wavenumber region as the first order diamond peak. The intensities, wavenumber, full width at half maximum (FWHM of these bands are dependent on quality of diamond layer which is dependent on the deposition conditions. The aim of the present work is to relate the features of diamond Raman spectra to the features of Raman spectra of non-diamond phase admixture and occurrence of other carbon structures in the obtained diamond thin films.

  9. Proton Irradiation of CVD Diamond Detectors for High Luminosity Experiments at the LHC

    CERN Document Server

    Meier, D; Bauer, C; Berdermann, E; Bergonzo, P; Bogani, F; Borchi, E; Bruzzi, Mara; Colledani, C; Conway, J; Dabrowski, W; Delpierre, P A; Deneuville, A; Dulinski, W; van Eijk, B; Fallou, A; Foulon, F; Friedl, M; Gan, K K; Gheeraert, E; Grigoriev, E A; Hallewell, G D; Hall-Wilton, R; Han, S; Hartjes, F G; Hrubec, Josef; Husson, D; Jany, C; Kagan, H; Kania, D R; Kaplon, J; Kass, R; Knöpfle, K T; Krammer, Manfred; Manfredi, P F; Marshall, R D; Mishina, M; Le Normand, F; Pan, L S; Palmieri, V G; Pernegger, H; Pernicka, Manfred; Peitz, A; Pirollo, S; Pretzl, Klaus P; Re, V; Riester, J L; Roe, S; Roff, D G; Rudge, A; Schnetzer, S R; Sciortino, S; Speziali, V; Stelzer, H; Stone, R; Tapper, R J; Tesarek, R J; Thomson, G B; Trawick, M L; Trischuk, W; Turchetta, R; Walsh, A M; Wedenig, R; Weilhammer, Peter; Ziock, H J; Zöller, M

    1999-01-01

    CVD diamond shows promising properties for use as a position sensitive detector for experiments in the highest radiation areas at the Large Hadron Collider. In order to study the radiation hardn ess of diamond we exposed CVD diamond detector samples to 24~GeV/$c$ and 500~MeV protons up to a fluence of $5\\times 10^{15}~p/{\\rm cm^2}$. We measured the charge collection distance, the ave rage distance electron hole pairs move apart in an external electric field, and leakage currents before, during, and after irradiation. The charge collection distance remains unchanged up to $1\\ times 10^{15}~p/{\\rm cm^2}$ and decreases by $\\approx$40~\\% at $5\\times 10^{15}~p/{\\rm cm^2}$. Leakage currents of diamond samples were below 1~pA before and after irradiation. The particle indu ced currents during irradiation correlate well with the proton flux. In contrast to diamond, a silicon diode, which was irradiated for comparison, shows the known large increase in leakage curren t. We conclude that CVD diamond detectors are radia...

  10. Topographic and spectroscopic characterization of electronic edge states in CVD grown graphene nanoribbons.

    Science.gov (United States)

    Pan, Minghu; Girão, E Costa; Jia, Xiaoting; Bhaviripudi, Sreekar; Li, Qing; Kong, Jing; Meunier, V; Dresselhaus, Mildred S

    2012-04-11

    We used scanning tunneling microscopy and spectroscopy (STM/S) techniques to analyze the relationships between the edge shapes and the electronic structures in as-grown chemical vapor deposition (CVD) graphene nanoribbons (GNRs). A rich variety of single-layered graphene nanoribbons exhibiting a width of several to 100 nm and up to 1 μm long were studied. High-resolution STM images highlight highly crystalline nanoribbon structures with well-defined and clean edges. Theoretical calculations indicate clear spin-split edge states induced by electron-electron Coulomb repulsion. The edge defects can significantly modify these edge states, and different edge structures for both sides of a single ribbon produce asymmetric electronic edge states, which reflect the more realistic features of CVD grown GNRs. Three structural models are proposed and analyzed to explain the observations. By comparing the models with an atomic resolution image at the edge, a pristine (2,1) structure was ruled out in favor of a reconstructed edge structure composed of 5-7 member rings, showing a better match with experimental results, and thereby suggesting the possibility of a defective morphology at the edge of CVD grown nanoribbons. © 2012 American Chemical Society

  11. Convection and chemistry effects in CVD: A 3-D analysis for silicon deposition

    Science.gov (United States)

    Gokoglu, S. A.; Kuczmarski, M. A.; Tsui, P.; Chait, A.

    1989-01-01

    The computational fluid dynamics code FLUENT has been adopted to simulate the entire rectangular-channel-like (3-D) geometry of an experimental CVD reactor designed for Si deposition. The code incorporated the effects of both homogeneous (gas phase) and heterogeneous (surface) chemistry with finite reaction rates of important species existing in silane dissociation. The experiments were designed to elucidate the effects of gravitationally-induced buoyancy-driven convection flows on the quality of the grown Si films. This goal is accomplished by contrasting the results obtained from a carrier gas mixture of H2/Ar with the ones obtained from the same molar mixture ratio of H2/He, without any accompanying change in the chemistry. Computationally, these cases are simulated in the terrestrial gravitational field and in the absence of gravity. The numerical results compare favorably with experiments. Powerful computational tools provide invaluable insights into the complex physicochemical phenomena taking place in CVD reactors. Such information is essential for the improved design and optimization of future CVD reactors.

  12. CVD Diamond Detectors for Current Mode Neutron Time-of-Flight Spectroscopy at OMEGA/NIF

    International Nuclear Information System (INIS)

    G. J. Schmid; V. Yu. Glebov; A. V. Friensehner; D. R. Hargrove; S. P. Hatchett; N. Izumi; R. A. Lerche; T. W. Phillips; T. C. Sangster; C. Silbernagel; C. Stoecki

    2001-01-01

    We have performed pulsed neutron and pulsed laser tests of a CVD diamond detector manufactured from DIAFILM, a commercial grade of CVD diamond. The laser tests were performed at the short pulse UV laser at Bechtel Nevada in Livermore, CA. The pulsed neutrons were provided by DT capsule implosions at the OMEGA laser fusion facility in Rochester, NY. From these tests, we have determined the impulse response to be 250 ps fwhm for an applied E-field of 500 V/mm. Additionally, we have determined the sensitivity to be 2.4 mA/W at 500 V/mm and 4.0 mA/W at 1000 V/mm. These values are approximately 2 to 5x times higher than those reported for natural Type IIa diamond at similar E-field and thickness (1mm). These characteristics allow us to conceive of a neutron time-of-flight current mode spectrometer based on CVD diamond. Such an instrument would sit inside the laser fusion target chamber close to target chamber center (TCC), and would record neutron spectra fast enough such that backscattered neutrons and x-rays from the target chamber wall would not be a concern. The acquired neutron spectra could then be used to extract DD fuel areal density from the downscattered secondary to secondary ratio

  13. Which population groups are most unaware of CVD risks associated with sitting time?

    Science.gov (United States)

    Duncan, Mitch J; Gilson, Nicholas; Vandelanotte, Corneel

    2014-08-01

    Prolonged sitting is an emerging risk factor for poor health yet few studies have examined awareness of the risks associated with sitting behaviours. This study identifies the population subgroups with the highest levels of unawareness regarding the cardiovascular disease (CVD) risks associated with sitting behaviours. Adults (n=1256) living in Queensland, Australia completed a telephone-based survey in 2011, analysis conducted in 2013. The survey assessed participant's socio-demographic characteristics, physical activity, sitting behaviours and awareness of CVD risks associated with three sitting behaviours: 1) sitting for prolonged periods, 2), sitting for prolonged periods whilst also engaging in regular physical activity, and 3) breaking up periods of prolonged sitting with short activity breaks. Population sub-groups with the highest levels of unawareness were identified based on socio-demographic and behavioural characteristics using signal detection analysis. Unawareness ranged from 23.3% to 67.0%. Age was the most important variable in differentiating awareness levels; younger adults had higher levels of unawareness. Body mass index, physical activity, TV viewing, employment status and time spent at work also identified population sub-groups. Unawareness of CVD risk for prolonged sitting was moderately high overall. Younger adults had high levels of unawareness on all of the outcomes examined. Copyright © 2014 Elsevier Inc. All rights reserved.

  14. Improving the quality of CVD graphene-based devices: synthesis, transfer, fabrication and measurement

    Science.gov (United States)

    Wang, Junjie; Wang, Bei; Skinner, Anna; Zhu, Jun

    2013-03-01

    Graphene synthesized by chemical vapor deposition (CVD) is potentially useful in a wide range of electronic and optoelectronic applications. In order to obtain CVD-graphene based devices with performance comparable to their exfoliated counterparts, improvement needs to be made on the synthesis and transfer of graphene, as well as device fabrication and measurement techniques. Here we report on a low-pressure growth procedure, which successfully suppresses the growth of multilayer patches, resulting in large-scale single-layer graphene production. By following the etching of the copper substrate with a HCl/H2O2 cleaning step similar to the RCA-2 procedure used in Silicon industry, metal particle contamination is reduced. By applying the gate voltage in pulse, we eliminate the hysteresis commonly observed in the transfer curve of graphene field effect transistors. This allows us to accurately determine the charge neutrality point and carrier mobility of the device. We are able to achieve high-quality CVD-graphene devices with average carrier mobility of 7,000 cm2V-1s-1.

  15. Corrosion protection of SiC-based ceramics with CVD mullite coatings

    Energy Technology Data Exchange (ETDEWEB)

    Sarin, V.; Mulpuri, R.; Auger, M. [Boston University, Boston, MA (United States) Manufacturing Engineering

    1996-04-20

    SiC based ceramics have been identified as the leading candidate materials for elevated temperature applications in harsh oxidation/corrosion environments. It has been established that a protective coating can be effectively used to avoid problems with excessive oxidation and hot corrosion. However, to date, no coating configuration has been developed that can withstand the rigorous requirements imposed by such applications. Chemical vapor deposited (CVD) mullite coatings due to their desirable properties of toughness, corrosion resistance, and good coefficient of thermal expansion match with SiC are being developed as a potential solution. Formation of mullite on ceramic substrates via chemical vapor deposition was investigated. Thermodynamic calculations performed on the AlCl{sub 3}- SiCl{sub 4}-CO{sub 2}-H{sub 2} system were used to construct equilibrium CVD phase diagrams. Through process optimization, crystalline CVD mullite coatings have been successfully grown on SiC and Si{sub 3}N{sub 4} substrates. Results from the thermodynamic analysis, process optimization, and effect of various process parameters on deposition rate and coating morphology are discussed.

  16. Synthesis and Characterization of Large-Area Graphene Directly CVD-Grown on h-BN

    Science.gov (United States)

    Kim, Minwoo; Song, Young; Wang, Min; Jang, Seong-Kyu; Lee, Sungjoo; Jang, Won-Jun; Kahng, Se-Jong; Graphene synthesis Collaboration; Characterization Collaboration

    2013-03-01

    As an ideal substrate for graphene, hexagonal boron nitride (h-BN) has been utilized and studied extensively by transfer technique, which still has a high chance to have impurities at the graphene/h-BN interface. Here we report direct CVD growth of graphene on large area h-BN film. AFM and Raman spectroscopy measurements show that there is only one monolayer of graphene, and whose unperturbed electronic structures are also confirmed by electron transport measurements and scanning tunneling spectroscopy. High resolution TEM images for cross-section taken before and after transferring graphene/h-BN on to SiO2 indicate this CVD-grown hybrid structure is robust enough. Based on this new method, high quality and large area graphene on h-BN film with a clean interface can be synthesized for the application of electronic devices, and can fill the missing steps to grow fully CVD-grown super-structure of graphene and h-BN. This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology (Grant Numbers: 2009-0083540, 2012R1A1A2020089 and 2012R1A1A1041416).

  17. Direct CVD Graphene Growth on Semiconductors and Dielectrics for Transfer-Free Device Fabrication.

    Science.gov (United States)

    Wang, Huaping; Yu, Gui

    2016-07-01

    Graphene is the most broadly discussed and studied two-dimensional material because of its preeminent physical, mechanical, optical, and thermal properties. Until now, metal-catalyzed chemical vapor deposition (CVD) has been widely employed for the scalable production of high-quality graphene. However, in order to incorporate the graphene into electronic devices, a transfer process from metal substrates to targeted substrates is inevitable. This process usually results in contamination, wrinkling, and breakage of graphene samples - undesirable in graphene-based technology and not compatible with industrial production. Therefore, direct graphene growth on desired semiconductor and dielectric substrates is considered as an effective alternative. Over the past years, there have been intensive investigations to realize direct graphene growth using CVD methods without the catalytic role of metals. Owing to the low catalytic activity of non-metal substrates for carbon precursor decomposition and graphene growth, several strategies have been designed to facilitate and engineer graphene fabrication on semiconductors and insulators. Here, those developed strategies for direct CVD graphene growth on semiconductors and dielectrics for transfer-free fabrication of electronic devices are reviewed. By employing these methods, various graphene-related structures can be directly prepared on desired substrates and exhibit excellent performance, providing versatile routes for varied graphene-based materials fabrication. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Freedom poverty: a new tool to identify the multiple disadvantages affecting those with CVD.

    Science.gov (United States)

    Callander, Emily J; Schofield, Deborah J; Shrestha, Rupendra N

    2013-06-20

    It is recognised that CVD affects an individual's financial situation, placing them in income poverty. However, recent developments in poverty measurement practice recognises other forms of disadvantage other than low income, such as poor health and insufficient education also affect living standards. Using the Freedom Poverty Measure, the multiple forms of disadvantage experienced by those with no health condition, heart disease, other diseases of the circulatory system, and all other health conditions was assessed using data on the adult Australian population contained in the 2003 Survey of Disability, Ageing and Carers. 24% of those with heart disease and 23% of those with other diseases of the circulatory system were in freedom poverty, suffering from multiple forms of disadvantage. Those with heart disease and those with other diseases of the circulatory system were around three times more likely to be in freedom poverty (OR 3.02, 95% CI: 2.29-3.99, p<.0001; OR 2.78, 95% CI: 1.94-3.98, p<.0001) than those with no health condition. Recognising the multiple forms of disadvantage suffered by those with CVD provides a clearer picture of their living standards than just looking at their income alone and the high proportion of individuals with CVD that are suffering from multiple forms of disadvantage should make them a target for policy makers wishing to improve living standards. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  19. CVD of alternated microcrystalline (MCD) and nanocrystalline (NCD) diamond films on WC-TIC-CO substrates

    International Nuclear Information System (INIS)

    Campos, Raonei Alves; Contin, Andre; Trava-Airoldi, Vladimir J.; Corat, Evaldo Jose; Barquete, Danilo Maciel

    2010-01-01

    CVD Diamond coating of WC-TiC-Co cutting tools has been an alternative to increase tool lifetime. Experiments have shown that residual stresses produced during films growth on WC-TiC-Co substrates significantly increases with increasing film thickness up to 20 μm and usually leads to film delamination. In this work alternated micro- and nanocrystalline CVD diamond films have been used to relax interface stresses and to increase diamond coatings performance. WC-TiC-Co substrates have been submitted to a boronizing thermal diffusion treatment prior to CVD diamond films growth. After reactive heat treatment samples were submitted to chemical etching in acid and alkaline solution. The diamond films deposition was performed using HFCVD reactor with different gas concentrations for microcrystalline (MCD) and nano-crystalline (NCD) films growth. As a result, we present the improvement of diamond films adherence on WC-TiC-Co, evaluated by indentation and machining tests. Samples were characterized by Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) for qualitative analysis of diamond films. X-ray Diffraction (XRD) was used for phases identification after boronizing process. Diamond film compressive residual stresses were analyzed by Raman Scattering Spectroscopy (RSS). (author)

  20. Increased risk of cardiovascular disease (CVD) with age in HIV-positive men

    DEFF Research Database (Denmark)

    Petoumenos, K; Reiss, P; Ryom, L

    2014-01-01

    equations. METHODS: We analysed three endpoints: myocardial infarction (MI), coronary heart disease (CHD: MI or invasive coronary procedure) and CVD (CHD or stroke). We fitted a number of parametric age effects, adjusting for known risk factors and antiretroviral therapy (ART) use. The best-fitting age...... effect was determined using the Akaike information criterion. We compared the ageing effect from D:A:D with that from the general population risk equations: the Framingham Heart Study, CUORE and ASSIGN risk scores. RESULTS: A total of 24 323 men were included in analyses. Crude MI, CHD and CVD event...... rates per 1000 person-years increased from 2.29, 3.11 and 3.65 in those aged 40-45 years to 6.53, 11.91 and 15.89 in those aged 60-65 years, respectively. The best-fitting models included inverse age for MI and age + age(2) for CHD and CVD. In D:A:D there was a slowly accelerating increased risk of CHD...

  1. CVD diamond detectors for current mode neutron time-of-flight spectroscopy at OMEGA/NIF

    Science.gov (United States)

    Schmid, Gregory J.; Glebov, Vladimir Y.; Friensehner, Allen V.; Hargrove, Dana R.; Hatchett, Steven P., II; Izumi, Nobuhiko; Lerche, Richard A.; Phillips, Thomas W.; Sangster, Thomas C.; Silbernagel, Christopher T.; Stoeckl, Christian

    2001-12-01

    We have performed pulsed neutron and pulsed laser tests of a CVD diamond detector manufactured from DIAFILM, a commercial grade of CVD diamond. The laser tests were performed at the short pulse UV laser at Bechtel Nevada in Livermore, CA. The pulsed neutrons were provided by DT capsule implosions at the OMEGA laser fusion facility in Rochester, NY. From these tests, we have determined the impulse response to be 250 ps fwhm for an applied E-field of 500 V/mm. Additionally, we have determined the sensitivity to be 2.4 mA/W at 500 V/mm and 4.0 mA/W at 100 V/mm. These values are approximately 2 to 5x times higher than those reported for natural Type IIa diamond at similar E-field and thickness (1mm). These characteristics allow us to conceive of a neutron time-of-flight current mode spectrometer based on CVD diamond. Such an instrument would sit inside the laser fusion target chamber close to target chamber center (TCC), and would record neutron spectra fast enough such that backscattered neutrons and (gamma) rays from the target chamber wall would not be a concern. The acquired neutron spectra could then be used to extract DD fuel areal density from the downscattered secondary to secondary ratio.

  2. Plasma CVD of hydrogenated boron-carbon thin films from triethylboron

    Science.gov (United States)

    Imam, Mewlude; Höglund, Carina; Schmidt, Susann; Hall-Wilton, Richard; Birch, Jens; Pedersen, Henrik

    2018-01-01

    Low-temperature chemical vapor deposition (CVD) of B—C thin films is of importance for neutron voltaics and semiconductor technology. The highly reactive trialkylboranes, with alkyl groups of 1-4 carbon atoms, are a class of precursors that have been less explored for low-temperature CVD of B—C films. Herein, we demonstrate plasma CVD of B—C thin films using triethylboron (TEB) as a single source precursor in an Ar plasma. We show that the film density and B/C ratio increases with increasing plasma power, reaching a density of 2.20 g/cm3 and B/C = 1.7. This is attributed to a more intense energetic bombardment during deposition and more complete dissociation of the TEB molecule in the plasma at higher plasma power. The hydrogen content in the films ranges between 14 and 20 at. %. Optical emission spectroscopy of the plasma shows that BH, CH, C2, and H are the optically active plasma species from TEB. We suggest a plasma chemical model based on β-hydrogen elimination of C2H4 to form BH3, in which BH3 and C2H4 are then dehydrogenated to form BH and C2H2. Furthermore, C2H2 decomposes in the plasma to produce C2 and CH, which together with BH and possibly BH3-x(C2H5)x are the film forming species.

  3. Coffee consumption is not associated with prevalent subclinical cardiovascular disease (CVD) or the risk of CVD events, in nonalcoholic fatty liver disease: Results from the multi-ethnic study of atherosclerosis

    Science.gov (United States)

    Atherosclerosis and its clinical sequelae represent the leading cause of mortality among patients with nonalcoholic fatty liver disease (NAFLD). While epidemiologic data support the hepatoprotective benefits of coffee in NAFLD, whether coffee improves NAFLD-associated Cardiovascular Disease (CVD) ri...

  4. Biomarkers and degree of atherosclerosis are independently associated with incident atherosclerotic cardiovascular disease in a primary prevention cohort: The ARIC study.

    Science.gov (United States)

    Agarwala, Anandita; Virani, Salim; Couper, David; Chambless, Lloyd; Boerwinkle, Eric; Astor, Brad C; Hoogeveen, Ron C; Coresh, Joe; Sharrett, A Richey; Folsom, Aaron R; Mosley, Tom; Ballantyne, Christie M; Nambi, Vijay

    2016-10-01

    Biomarkers and atherosclerosis imaging have been studied individually for association with incident cardiovascular disease (CVD); however, limited data exist on whether the biomarkers are associated with events with a similar magnitude in the presence of atherosclerosis. In this study, we assessed whether the presence of atherosclerosis as measured by carotid intima media thickness (cIMT) affects the association between biomarkers known to be associated with coronary heart disease (CHD) and incident cardiovascular disease (CVD) in a primary prevention cohort. 8127 participants from the ARIC study (4th visit, 1996-1998) were stratified as having minimal, mild, or substantial atherosclerosis by cIMT. Levels of C-reactive protein, lipoprotein-associated phospholipase A2, cardiac troponin T, N-terminal pro-brain natriuretic peptide, lipoprotein(a), cystatin C, and urine albumin to creatinine ratio were measured in each participant. Hazard ratios were used to determine the relationship between the biomarkers and incident CHD, stroke, and CVD in each category of atherosclerosis. While each of the biomarkers was significantly associated with risk of events overall, we found no significant differences noted in the strength of association of biomarkers with CHD, stroke, and CVD when analyzed by degree of atherosclerosis. These findings suggest that the level of atherosclerosis does not significantly influence the association between biomarkers and CVD. Published by Elsevier Ireland Ltd.

  5. Flow field velocity measurements for non-isothermal systems. [of chemically reactive flow inside fused silica CVD reactor vessels

    Science.gov (United States)

    Johnson, E. J.; Hyer, P. V.; Culotta, P. W.; Clark, I. O.

    1991-01-01

    Experimental techniques which can be potentially utilized to measure the gas velocity fields in nonisothermal CVD systems both in ground-based and space-based investigations are considered. The advantages and disadvantages of a three-component laser velocimetry (LV) system that was adapted specifically for quantitative determination of the mixed convective flows in a chamber for crystal growth and film formation by CVD are discussed. Data from a horizontal research CVD reactor indicate that current models for the effects of thermophoretic force are not adequate to predict the thermophoretic bias in arbitrary flow configurations. It is concluded that LV techniques are capable of characterizing the fluid dynamics of a CVD reactor at typical growth temperatures. Thermal effects are shown to dominate and stabilize the fluid dynamics of the reactor. Heating of the susceptor increases the gas velocities parallel to the face of a slanted susceptor by up to a factor of five.

  6. Laser-Directed CVD 3D Printing System for Refractory Metal Propulsion Hardware, Phase II, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — In this work, Ultramet is developing a three-dimensional (3D) laser-directed chemical vapor deposition (CVD) additive manufacturing system to build free-form...

  7. Analysis of the interface characteristics of CVD-grown monolayer MoS2by noise measurements.

    Science.gov (United States)

    Kim, Tae-Young; Song, Younggul; Cho, Kyungjune; Amani, Matin; Ho Ahn, Geun; Kim, Jae-Keun; Pak, Jinsu; Chung, Seungjun; Javey, Ali; Lee, Takhee

    2017-04-07

    We investigated the current-voltage and noise characteristics of two-dimensional (2D) monolayer molybdenum disulfide (MoS 2 ) synthesized by chemical vapor deposition (CVD). A large number of trap states were produced during the CVD process of synthesizing MoS 2 , resulting in a disordered monolayer MoS 2 system. The interface trap density between CVD-grown MoS 2 and silicon dioxide was extracted from the McWhorter surface noise model. Notably, generation-recombination noise which is attributed to charge trap states was observed at the low carrier density regime. The relation between the temperature and resistance following the power law of a 2D inverted-random void model supports the idea that disordered CVD-grown monolayer MoS 2 can be analyzed using a percolation theory. This study can offer a viewpoint to interpret synthesized low-dimensional materials as highly disordered systems.

  8. Industrial science and technology research and development project of university cooperative type in fiscal 2000. Report on achievements in semiconductor device manufacturing processes using Cat-CVD method (Semiconductor device manufacturing processes using Cat-CVD method); 2000 nendo daigaku renkeigata sangyo kagaku gijutsu kenkyu kaihatsu project. Cat-CVD ho ni yoru handotai device seizo process seika hokokusho (Cat-CVD ho ni yoru handotai device seizo process)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The catalytic chemical vapor deposition (Cat-CVD) method is a low-temperature thin film depositing technology that can achieve improvement in quality of semiconductor thin films and can perform inexpensive film deposition in a large area. The present project is composed of the basic research and development theme and the demonstrative research and development theme for the Cat-CVD method. This report summarizes the achievements in fiscal 2000 centering on the former theme. Discussions were given on the following five areas: 1) simulation on film thickness distribution in the Cat-CVD method, 2) life extension by preventing the catalyst converting into silicide and development of a catalyst integrated shear head, 3) vapor diagnosis in the film forming process by the Cat-CVD method using silane, hydrogen and ammonia, 4) a technology for high-speed deposition of hydrogenated amorphous silicon films for solar cells using the Cat-CVD method, and the low-temperature silicon oxide nitriding technology using heated catalysts, and 5) discussions on compatibility of transparent oxide electrode materials to the process of manufacturing thin-film silicon-based solar cells by using the Cat-CVD method. (NEDO)

  9. Synthesis of graphene on nickel films by CVD method using methane

    International Nuclear Information System (INIS)

    Castro, Manuela O. de; Liebold-Ribeiro, Yvonne; Barros, Eduardo B.; Salomao, Francisco C.C.; Mendes Filho, Josue; Souza Filho, Antonio G.; Chesman, Carlos

    2011-01-01

    Full text: Nanomaterials have opened up many possibilities for groundbreaking innovations in various technologies of modern society. One key example is graphene, which is composed of one-atom-thick sheet of sp2-bonded carbon atoms, arranged in a hexagonal symmetry. However, real world applications of graphene require well-established and large synthesis techniques. The so-called Chemical Vapor Deposition (CVD) is one of the most promising method for synthesizing graphene. The general idea of this technique is to dissolve carbon atoms inside a transition metal melt at a certain temperature, then allowing the dissolved carbon to precipitate at lower temperatures as single layer graphene (SLG). In the present work, we used the CVD method and methane gas as carbon source for the synthesis of graphene on silicon (Si) substrates (300nm thermal oxide) covered with sputtered nickel (Ni) films as catalyst. In order to achieve large-area and defect-free graphene sheets the influence of the different growth parameters (growth temperature and time, gas flow of methane, film thickness and grain size of Ni) on quality and quantity of graphene growth were studied. The obtained graphene films were transferred to a silicon substrate by the polymer coating process, using polymethyl-methacrylate (PMMA) as coating. In order to characterize the transferred graphene we used Scanning Electron Microscopy (SEM), Raman Spectroscopy, Optical Microscopy and Atomic Force Microscopy (AFM). The results show the influence of CVD process parameters on the quality and quantity of graphene growth in our experimental conditions. Acknowledgments: The authors thank Brazilian agencies CNPq and FUNCAP for financial support and Alfonso Reina (MIT, USA) for helpful discussions. (author)

  10. Catalyst and its diameter dependent growth kinetics of CVD grown GaN nanowires

    International Nuclear Information System (INIS)

    Samanta, Chandan; Chander, D. Sathish; Ramkumar, J.; Dhamodaran, S.

    2012-01-01

    Graphical abstract: GaN nanowires with controlled diameter and aspect ratio has been grown using a simple CVD technique. The growth kinetics of CVD grown nanowires investigated in detail for different catalysts and their diameters. A critical diameter important to distinguish the growth regimes has been discussed in detail. The results are important which demonstrates the growth of diameter and aspect ratio controlled GaN nanowires and also understand their growth kinetics. Highlights: ► Controlled diameter and aspect ratio of GaN nanowires achieved in simple CVD reactor. ► Nanowire growth kinetics for different catalyst and its diameters were understood. ► Adatoms vapor pressure inside reactor plays a crucial role in growth kinetics. ► Diffusion along nanowire sidewalls dominate for gold and nickel catalysts. ► Gibbs–Thomson effect dominates for palladium catalyst. -- Abstract: GaN nanowires were grown using chemical vapor deposition with controlled aspect ratio. The catalyst and catalyst-diameter dependent growth kinetics is investigated in detail. We first discuss gold catalyst diameter dependent growth kinetics and subsequently compare with nickel and palladium catalyst. For different diameters of gold catalyst there was hardly any variation in the length of the nanowires but for other catalysts with different diameter a strong length variation of the nanowires was observed. We calculated the critical diameter dependence on adatoms pressure inside the reactor and inside the catalytic particle. This gives an increasing trend in critical diameter as per the order gold, nickel and palladium for the current set of experimental conditions. Based on the critical diameter, with gold and nickel catalyst the nanowire growth was understood to be governed by limited surface diffusion of adatoms and by Gibbs–Thomson effect for the palladium catalyst.

  11. MCFRS Incidents by Station

    Data.gov (United States)

    Montgomery County of Maryland — This dataset contains the monthly summary data indicating incident occurred in each fire station response area. The summary data is the incident count broken down by...

  12. Police Incident Reports Written

    Data.gov (United States)

    Town of Chapel Hill, North Carolina — This table contains incident reports filed with the Chapel Hill Police Department. Multiple incidents may have been reported at the same time. The most serious...

  13. Proposed classification scale for radiological incidents and accidents; Elaboration d'une echelle de classement des incidents et accidents radiologiques

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-04-15

    The scale proposed in this report is intended to facilitate communication concerning the severity of incidents and accidents involving the exposure of human beings to ionising radiations. Like the INES, it comprises eight levels of severity and uses the same terms (accident, incident, anomaly, serious and major) for keeping the public and the media informed. In a radiological protection context, the severity of an event is considered as being directly proportional to the risk run by an individual (the probability of developing fatal or non-fatal health effects) following exposure to ionising radiation in an incident or accident situation. However for society, other factors have to be taken into account to determine severity. The severity scale proposed is therefore based on assessment of the individual radiological risk. A severity level corresponding to exposure of a member of the public in an incident or accident situation is determined on the basis of risk assessment concepts and methods derived from international consensus on dose/effect relationships for both stochastic and deterministic effects. The severity of all the possible exposure situations - worker exposure, collective exposure, potential exposure - is determined using a system of weighting in relation to situations involving members of the public. In the case of this scale, to indicate the severity of an event, it is proposed to make use of the most penalizing level of severity, comparing: - the severity associated with the probability of occurrence of deterministic effects and the severity associated with the probability of occurrence of stochastic effects, when the event gives rise to both types of risk; - the severity for members of the public and the severity for exposed workers, when both categories of individuals are involved; - the severity on the proposed radiological protection scale and that obtained using the INES, when radiological protection and nuclear safety aspects are associated with

  14. Cardiovascular Disease Population Risk Tool (CVDPoRT): predictive algorithm for assessing CVD risk in the community setting. A study protocol.

    Science.gov (United States)

    Taljaard, Monica; Tuna, Meltem; Bennett, Carol; Perez, Richard; Rosella, Laura; Tu, Jack V; Sanmartin, Claudia; Hennessy, Deirdre; Tanuseputro, Peter; Lebenbaum, Michael; Manuel, Douglas G

    2014-10-23

    Recent publications have called for substantial improvements in the design, conduct, analysis and reporting of prediction models. Publication of study protocols, with prespecification of key aspects of the analysis plan, can help to improve transparency, increase quality and protect against increased type I error. Valid population-based risk algorithms are essential for population health planning and policy decision-making. The purpose of this study is to develop, evaluate and apply cardiovascular disease (CVD) risk algorithms for the population setting. The Ontario sample of the Canadian Community Health Survey (2001, 2003, 2005; 77,251 respondents) will be used to assess risk factors focusing on health behaviours (physical activity, diet, smoking and alcohol use). Incident CVD outcomes will be assessed through linkage to administrative healthcare databases (619,886 person-years of follow-up until 31 December 2011). Sociodemographic factors (age, sex, immigrant status, education) and mediating factors such as presence of diabetes and hypertension will be included as predictors. Algorithms will be developed using competing risks survival analysis. The analysis plan adheres to published recommendations for the development of valid prediction models to limit the risk of overfitting and improve the quality of predictions. Key considerations are fully prespecifying the predictor variables; appropriate handling of missing data; use of flexible functions for continuous predictors; and avoiding data-driven variable selection procedures. The 2007 and 2009 surveys (approximately 50,000 respondents) will be used for validation. Calibration will be assessed overall and in predefined subgroups of importance to clinicians and policymakers. This study has been approved by the Ottawa Health Science Network Research Ethics Board. The findings will be disseminated through professional and scientific conferences, and in peer-reviewed journals. The algorithm will be accessible

  15. Ethylene Gas Sensing Properties of Tin Oxide Nanowires Synthesized via CVD Method

    Science.gov (United States)

    Akhir, Maisara A. M.; Mohamed, Khairudin; Rezan, Sheikh A.; Arafat, M. M.; Haseeb, A. S. M. A.; Uda, M. N. A.; Nuradibah, M. A.

    2018-03-01

    This paper studies ethylene gas sensing performance of tin oxide (SnO2) nanowires (NWs) as sensing material synthesized using chemical vapor deposition (CVD) technique. The effect of NWs diameter on ethylene gas sensing characteristics were investigated. SnO2 NWs with diameter of ∼40 and ∼240 nm were deposited onto the alumina substrate with printed gold electrodes and tested for sensing characteristic toward ethylene gas. From the finding, the smallest diameter of NWs (42 nm) exhibit fast response and recovery time and higher sensitivity compared to largest diameter of NWs (∼240 nm). Both sensor show good reversibility features for ethylene gas sensor.

  16. Numerical modeling of chemical vapor deposition (CVD) in a horizontal reactor

    Science.gov (United States)

    Sheikholeslami, M. Z.; Jasinski, T.; Fretz, K. W.

    1988-01-01

    In the present numerical prediction of the deposition rate of silicon from silane in a CVD process, the conservation equations for mass, momentum, energy, and chemical species are solved on a staggered grid using the SIMPLE algorithm, while the rate of chemical reactions in the gas phase and on the susceptor surface is obtained from an Arrhenius rate equation. Predicted deposition rates as a function of position along the susceptor with and without the gas phase chemical reaction are compared with the available experimental and numerical data; agreement is excellent except at the leading edge of the susceptor, where the deposition rate is overpredicted.

  17. The study on diamond-coated insert by DC plasma jet CVD

    International Nuclear Information System (INIS)

    Zhou Kesong; Dai Mingjiang; Song Jinbing; Kuang Tongchun; Liu Zhengyi

    2001-01-01

    Diamond coating were deposited on cemented carbide inserts by DC plasma jet CVD. The cemented carbide inserts were pretreated by methods including chemical etching of Co, Ar/H 2 plasma etching. The characteristics of diamond film, interface structure, adhesion strength and film stress were analysized by different methods such as SEM, XRD, Raman spectrum etc. A comparing experiment of cutting Al - 22 % Si alloy was carried out with diamond-coated cemented carbide inserts and uncoated cemented carbide inserts. The results show that the diamond-coated cemented carbide insert has a great advantage for cutting abrasive high content Al - Si alloy. (author)

  18. Growth, characterization and properties of CVD diamond films for applications as radiation detectors

    International Nuclear Information System (INIS)

    Sciorti, S.

    1999-01-01

    The aim of the work is to give a picture of the current state of the art of CVD (chemical vapour deposition) diamond. The interest is due to the capability to grow over large areas a material with physical properties suitable for an impressive number of applications. The authors focuses on the potential of diamond as a radiation detector and gets into details of the huge field that extends from the thermochemistry of the deposition process to the test of a diamond-based tracker with a fast readout electronics

  19. Synthesis and characterization of CVD graphene on copper: Towards the fabrication of synthetic graphene suspensions

    OpenAIRE

    Sempere Nomen, Bernat

    2017-01-01

    El grafè està composat per una capa de carboni de només un àtom de gruix, agrupats en una matriu hexagonal. Es pot entendre com una de les làmines que formen el grafit. Se l’ha anomenat el material meravellós del segle XXI degut a les seves excepcionals propietats i les aplicacions potencials que se’n desprenen. Actualment, es pot trobar dipositat sobre diferents substrats, principalment per “Chemical Vapour Deposition” (CVD), i partícules o suspensions formades per plaquetes de grafè obting...

  20. Optical characterization of a-Si:H thin films grown by Hg-Photo-CVD

    International Nuclear Information System (INIS)

    Barhdadi, A.; Karbal, S.; M'Gafad, N.; Benmakhlouf, A.; Chafik El Idrissi, M.; Aka, B.M.

    2006-08-01

    Mercury-Sensitized Photo-Assisted Chemical Vapor Deposition (Hg-Photo-CVD) technique opens new possibilities for reducing thin film growth temperature and producing novel semiconductor materials suitable for the future generation of high efficiency thin film solar cells onto low cost flexible plastic substrates. This paper provides some experimental data resulting from the optical characterization of hydrogenated amorphous silicon thin films grown by this deposition technique. Experiments have been performed on both as-deposited layers and thermal annealed ones. (author) [fr

  1. The effect of alkaline doped catalysts on the CVD synthesis of carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Nemeth, Krisztian; Nemeth, Zoltan; Fejes, Dora; Reti, Balazs; Hernadi, Klara [Department of Applied and Environmental Chemistry, University of Szeged, Rerrich Bela ter 1, Szeged 6720 (Hungary); Balogh, Zoltan [Center for Electron Nanoscopy, Technical University of Denmark, Building 307, Fysikvej, 2800 Kongens Lyngby (Denmark)

    2011-11-15

    The aim of this work was to develop new doped catalysts for chemical vapour deposition (CVD) synthesis in order to increase the quantity and quality of carbon nanotubes (CNTs). Doping compounds such as CsBr, CsCl, KBr and KCl were used to reach higher carbon deposit and carbon yield. The amount of the dopant alkali compounds varied from 1 to 5%. As prepared CNTs were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and Raman microscopy. Results revealed that both carbon yield and deposit could be increased over doped catalysts. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  2. Role of biomarkers in predicting CVD risk in the setting of HIV infection?

    DEFF Research Database (Denmark)

    Worm, Signe W; Hsue, Priscilla

    2010-01-01

    with risk of CVD. Biomarkers associated with inflammation such as C-reactive protein and interleukin-6 have been suggested to improve risk stratification among intermediate-risk persons; however, their routine use is not recommended in the general population. Both biomarkers have recently been reported......-infected population and will increase as this population continues to age. Identification of intermediate-risk individuals using biomarkers will be an important tool for clinicians in the future to be able to treat HIV-infected individuals aggressively. Future studies of biomarkers among individuals with HIV...

  3. Preparation of Ultrafine CVD WC Powders Deposited from WCl6 Gas Mixtures

    OpenAIRE

    Tang, Xing; Haubner, R.; Lux, B.; Kieffer, B.

    1995-01-01

    Ultrafine WC powders were produced from WCl6-C3H8-H2 gaz mixtures in a conventional tubular hot-wall downstream CVD reactor. At reaction temperatures between 1100 and 1550°C powders containing W, W2C, WC and carbon were produced. The overall chemical compositions of the tungsten compounds as well as the free carbon contents depended strongly on the reaction temperature and the ratio of the reaction gases introduced. With increased reaction temperature and exposure time the amount of tungsten ...

  4. Hot wire CVD deposition of nanocrystalline silicon solar cells on rough substrates

    OpenAIRE

    Li, H. B. T.; van der Werf, C.H.M.; Rath, J.K.; Schropp, R.E.I.

    2009-01-01

    In silicon thin film solar cell technology, frequently rough or textured substrates are used to scatter the light and enhance its absorption. The important issue of the influence of substrate roughness on silicon nanocrystal growth has been investigated through a series of nc-Si:H single junction p-i-n solar cells containing i-layers deposited with Hot-wire CVD. It is shown that silicon grown on the surface of an unoptimized rough substrate contains structural defects, which deteriorate solar...

  5. Incident Information Management Tool

    CERN Document Server

    Pejovic, Vladimir

    2015-01-01

    Flaws of\tcurrent incident information management at CMS and CERN\tare discussed. A new data\tmodel for future incident database is\tproposed and briefly described. Recently developed draft version of GIS-­‐based tool for incident tracking is presented.

  6. Leucocyte Telomere Length and Risk of Cardiovascular Disease in a Cohort of 1,397 Danish Men and Women

    DEFF Research Database (Denmark)

    Ellehoj, Hanne; Bendix, Laila; Osler, Merete

    2016-01-01

    OBJECTIVES: Short leucocyte telomere length (LTL) might be a risk factor for cardiovascular diseases (CVD). The present study examines the relation between LTL and incident fatal or non-fatal CVD, ischaemic heart disease (IHD) and stroke in a Danish cohort followed for 29 years. METHODS: In total...... rate ratio of 1.97 (95% CI 1.31-2.93) and 1.55 (95% CI 1.02-2.35), respectively, which was attenuated when confounding factors were adjusted for. For stroke, the pattern of associations was similar but less precisely estimated. CONCLUSIONS: In this study short, LTL was not associated with an increased...

  7. Joint association of physical activity/screen time and diet on CVD risk factors in 10-year-old children.

    Science.gov (United States)

    Drenowatz, Clemens; Carlson, Joseph J; Pfeiffer, Karin A; Eisenmann, Joey C

    2012-12-01

    The increasing prevalence of childhood overweight and obesity has been associated with an increased risk for cardiovascular disease (CVD). While several studies examined the effect of single behaviors such as physical activity (PA), sedentary behavior or diet on CVD risk, there is a lack of research on combined associations, specifically in children. Therefore, the purpose of this study was to examine the joint association of PA or screen time (ST) and diet on CVD risk factors in children. PA, STand diet were assessed via questionnaire in 210 fifth grade students (age: 10.6 ± 0.4 years). The healthy eating index (HEI) was subsequently calculated as indicator for diet quality. Height, weight, % body fat, and resting blood pressure were measured according to standard procedures and blood samples obtained via fingerprick were assayed for blood lipids. Total cholesterol HDL ratio (TC:HDL), mean arterial pressure (MAP), and % body fat were used as indicators of CVD risk. 55% of children did not meet current PA recommendations on at least 5 days/week and 70% exceeded current recommendations for ST. Further, only 2.5% possessed a "good" diet (HEI> 80). There was no significant association of PA or STand diet on CVD risk score. Neither TC:HDL, MAP, and % body fat nor the total CVD risk score was significantly correlated with diet, PA, or ST. Children in the high PA group, however, had significantly better diet scores. Despite the fact that self-reported PA, ST, or dietary intake were not directly related to CVD risk in this sample, higher activity levels were associated with a healthier diet and lower ST indicating an overall healthier lifestyle of this subgroup.

  8. CVD risk among men participating in the National Health and Nutrition Examination Survey (NHANES) from 2001 to 2010: differences by sexual minority status.

    Science.gov (United States)

    Farmer, Grant W; Bucholz, Kathleen K; Flick, Louise H; Burroughs, Thomas E; Bowen, Deborah J

    2013-09-01

    Recent research indicates that sexual minority women are at increased risk for cardiovascular disease (CVD) compared with heterosexual women; however, few studies of CVD risk exist for sexual minority men (SMM). This study aimed to determine whether disparities in CVD risk exist for SMM and if CVD risk is consistent across subgroups of SMM. This study utilised publicly available data from the National Health and Nutrition Examination Survey (NHANES), pooled from 2001 to 2010. CVD risk was calculated using the Framingham General CVD Risk Score and operationalised as the ratio of a participant's vascular and chronological age. Differences in this ratio were examined between heterosexual and SMM as a whole, and within subgroups of SMM. SMM had vascular systems that were, on average, 4% (95% CI -7.5% to -0.4%) younger than their heterosexual counterparts; however, adjustment for education and history of hard drug use rendered this difference statistically insignificant. Analysis of SMM subgroups revealed increased CVD risk for bisexual men and decreased CVD risk for both gay and homosexually experienced heterosexual men when compared with heterosexual men. Differences in CVD risk persisted for only bisexual and homosexually experienced heterosexual men after adjustment for education and history of hard drug use. Subgroups of SMM are at increased risk for CVD compared with heterosexual men, and this increased risk cannot be completely attributed to differences in demographic characteristics or negative health behaviours.

  9. Markers of inflammation and endothelial dysfunction are associated with incident cardiovascular disease, all-cause mortality, and progression of coronary calcification in type 2 diabetic patients with microalbuminuria

    DEFF Research Database (Denmark)

    von Scholten, Bernt Johan; Reinhard, Henrik; Hansen, Tine Willum

    2016-01-01

    BACKGROUND: We evaluated markers of inflammation and endothelial dysfunction and their associations with incident cardiovascular disease (CVD), all-cause mortality and progression of coronary artery calcium (CAC) in patients with type 2 diabetes (T2D) and microalbuminuria but without known corona...

  10. Exploring the path between depression, anxiety and 10-year cardiovascular disease incidence, among apparently healthy Greek middle-aged adults: The ATTICA study.

    Science.gov (United States)

    Kollia, Natasa; Panagiotakos, Demosthenes; Georgousopoulou, Ekavi; Chrysohoou, Christina; Yannakoulia, Mary; Stefanadis, Christodoulos; Chatterji, Somnath; Haro, Josep Maria; Papageorgiou, Charalabos; Pitsavos, Christos

    2017-12-01

    Although there is substantial evidence that psychological factors play an important role in the onset and course of cardiovascular disease (CVD), less is known about their combined effect and the pathways by which they affect cardiovascular health. The present work aimed to prospectively explore the effects of depression and anxiety on the 10-year CVD incidence, in relation to other lifestyle determinants, as linking factors in the context of the ATTICA study. Study design/Main outcome measures: The ATTICA study is a population-based, health and nutrition prospective cohort study (2002-2012), during which 853 middle-aged participants without a history of CVD [453 men (aged 45±13years) and 400 women (aged 44±18years)], underwent psychological evaluations at enrollment. The latent trait of depression and anxiety combined measure was estimated and referred as "Psychological distress"; path analysis was applied to describe the relationships among the different factors. "Psychological distress" was positively associated with the 10-year CVD incidence (adjusted OR per 10 units: 1.4, 95% CI: 1.1, 1.7). Three linking pathways were revealed: sedentariness, inflammation and metabolic syndrome. Moreover, "Psychological distress" mediated the association between socioeconomic status (SES) and CVD, with participants of low SES scoring higher on the psychological measure (adjusted linear regression coefficient b: -7.1, 95% CI: -9.7, -4.5). Lifestyle and clinical factors seem to link psychological distress with CVD development. Joint psychological assessments should be considered for inclusion in CVD preventive strategies, which should incorporate interventions for interrupting the linking pathways. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Treatment with tumor necrosis factor blockers is associated with a lower incidence of first cardiovascular events in patients with rheumatoid arthritis.

    Science.gov (United States)

    Jacobsson, Lennart T H; Turesson, Carl; Gülfe, Anders; Kapetanovic, Meliha C; Petersson, Ingemar F; Saxne, Tore; Geborek, Pierre

    2005-07-01

    To investigate the risk of cardiovascular disease (CVD) in patients with rheumatoid arthritis (RA) treated with tumor necrosis factor (TNF) inhibitors, compared to a standard RA population. Patients were recruited from a regional register, which includes over 90% of patients with RA started on TNF blockers in 1999 or later, and a local community based cohort of RA patients, established in 1997. Of a total of 983 patients in the combined cohort, 531 received treatment with etanercept or infliximab during the study period. The total cohort (n = 983) was linked with national registers for inpatient care and cause of death through December 31, 2001. CVD was defined as the first inpatient care or death from CVD without inpatient care for CVD prior to study entry. First CVD events in those treated versus not treated with TNF blockers were estimated, using age and sex adjusted incidence density computations with treatment and disease severity markers as time-dependent covariates. In the anti-TNF-treated patients, the age-sex adjusted incidence rate of first CVD event was 14.0/1000 person-years at risk (95% CI 5.7-22.4), compared with 35.4/1000 person-years (95% CI 16.5-54.4) in those not treated. Controlling for disability, the age-sex adjusted rate ratio was 0.46 (95% CI 0.25-0.85, p = 0.013) in anti-TNF-treated versus not treated. These findings suggest that the risk of developing CVD is lower in patients with RA treated with TNF blockers. This is compatible with the hypothesis that inflammation contributes to the development of cardiovascular events.

  12. Global, regional, and national incidence, prevalence, and years lived with disability for 310 diseases and injuries, 1990–2015: a systematic analysis for the Global Burden of Disease Study 2015

    DEFF Research Database (Denmark)

    Moesgaard Iburg, Kim

    2016-01-01

    and prevalence by age, sex, cause, year, and geography with a wide range of updated and standardised analytical procedures. Improvements from GBD 2013 included the addition of new data sources, updates to literature reviews for 85 causes, and the identification and inclusion of additional studies published up...... to November, 2015, to expand the database used for estimation of non-fatal outcomes to 60 900 unique data sources. Prevalence and incidence by cause and sequelae were determined with DisMod-MR 2.1, an improved version of the DisMod-MR Bayesian meta-regression tool first developed for GBD 2010 and GBD 2013....... For some causes, we used alternative modelling strategies where the complexity of the disease was not suited to DisMod-MR 2.1 or where incidence and prevalence needed to be determined from other data. For GBD 2015 we created a summary indicator that combines measures of income per capita, educational...

  13. Influence of tungsten on the carbon nanotubes growth by CVD process

    Energy Technology Data Exchange (ETDEWEB)

    Escobar, Mariano [Instituto de Fisicoquimica de Materiales, Ambiente y Energia, CONICET-UBA, Pabellon II, Ciudad Universitaria (1428) Bs As (Argentina); LP and MC, Dep. De Fisica, FCEyN-UBA, Pabellon 1, Ciudad Universitaria (1428) Bs As (Argentina)], E-mail: mescobar@qi.fcen.uba.ar; Rubiolo, Gerardo H. [LP and MC, Dep. De Fisica, FCEyN-UBA, Pabellon 1, Ciudad Universitaria (1428) Bs As (Argentina); Unidad de Actividad Materiales, CNEA, Av. Gral. Paz 1499, San Martin (1650), Bs As (Argentina); Moreno, M. Sergio [Centro Atomico Bariloche, (8400) S.C. de Bariloche, Rio Negro (Argentina); Goyanes, Silvia [LP and MC, Dep. De Fisica, FCEyN-UBA, Pabellon 1, Ciudad Universitaria (1428) Bs As (Argentina); Candal, Roberto [Instituto de Fisicoquimica de Materiales, Ambiente y Energia, CONICET-UBA, Pabellon II, Ciudad Universitaria (1428) Bs As (Argentina)

    2009-06-24

    The effect of tungsten (W) on the growth of multi-walled carbon nanotubes (MWNTs) using the chemical vapour deposition (CVD) process over a metal Fe-W catalyst incorporated into a silica matrix is reported. A W molar content in Fe/SiO{sub 2} up to 10% was studied. The incorporation of only 2% of W substantially modifies the crystalline phases and the crystalline degree of the catalyst during the MWNTs synthesis. This fact seems to have a strong influence on the type and yield of the carbonaceous species obtained by the CVD of acetylene, at 600 deg. C and 180 Torr, over each catalyst. Tungsten interacts with iron within the matrix, diminishing the catalytic activity of the metal nanoparticles, and both, carbon nanotubes and carbon nanofibers, are obtained when tungsten is present. The results obtained support the hypothesis of a base growth model for carbon nanotubes indicating a strong interaction between silica matrix and Fe/W nanoparticles, independently of the content of W.

  14. A novel Mo-W interlayer approach for CVD diamond deposition on steel

    Directory of Open Access Journals (Sweden)

    Vojtěch Kundrát

    2015-04-01

    Full Text Available Steel is the most widely used material in engineering for its cost/performance ratio and coatings are routinely applied on its surface to further improve its properties. Diamond coated steel parts are an option for many demanding industrial applications through prolonging the lifetime of steel parts, enhancement of tool performance as well as the reduction of wear rates. Direct deposition of diamond on steel using conventional chemical vapour deposition (CVD processes is known to give poor results due to the preferential formation of amorphous carbon on iron, nickel and other elements as well as stresses induced from the significant difference in the thermal expansion coefficients of those materials. This article reports a novel approach of deposition of nanocrystalline diamond coatings on high-speed steel (M42 substrates using a multi-structured molybdenum (Mo – tungsten (W interlayer to form steel/Mo/Mo-W/W/diamond sandwich structures which overcome the adhesion problem related to direct magnetron sputtering deposition of pure tungsten. Surface, interface and tribology properties were evaluated to understand the role of such an interlayer structure. The multi-structured Mo-W interlayer has been proven to improve the adhesion between diamond films and steel substrates by acting as an effective diffusion barrier during the CVD diamond deposition.

  15. Pushing the boundaries of high power lasers: low loss, large area CVD diamond

    Science.gov (United States)

    Wickham, Benjamin; Schoofs, Frank; Olsson-Robbie, Stefan; Bennett, Andrew; Balmer, Richard

    2018-02-01

    Synthetic CVD diamond has exceptional properties, including broad spectral transmission, physical and chemical robustness, and the highest thermal conductivity of any known material, making diamond an attractive material for medium to high power optical and laser applications, minimizing the detrimental effects of thermal lensing and radiation damage. Example applications include ATR prisms, Raman laser crystals, extra- and intra-cavity laser cooling. In each case the demands on the fundamental material properties and fabrication routes are slightly different. In recent years, there has been good progress in the development of low-loss, single crystal diamond, suitable for higher power densities, higher pulse rates and more demanding intra- and extra-cavity thermal management. The adoption of single crystal diamond in this area has however, been hindered by the availability of large area, low birefringence plates. To address this, we report a combination of CVD growth and processing methods that have enabled the manufacture of large, low defect substrates. A final homoepitaxial, low absorption synthesis stage has produced plates with large area (up to 16 mm edge length), low absorption (αdiamond parts, optimizing them for use in a state-of-the-art femto-second pulsed Ti:Sa thin disk gain module, all made in collaboration with the wider European FP7 funded Ti:Sa TD consortium.

  16. Surface structure deduced differences of copper foil and film for graphene CVD growth

    International Nuclear Information System (INIS)

    Tian, Junjun; Hu, Baoshan; Wei, Zidong; Jin, Yan; Luo, Zhengtang; Xia, Meirong; Pan, Qingjiang; Liu, Yunling

    2014-01-01

    Highlights: • We demonstrate the significant differences between Cu foil and film in the surface morphology and crystal orientation distribution. • The different surface structure leads to the distinctive influences of the CH 4 and H 2 concentrations on the thickness and quality of as-grown graphene. • Nucleation densities and growth rate differences at the initial growth stages on the Cu foil and film were investigated and discussed. - Abstract: Graphene was synthesized on Cu foil and film by atmospheric pressure chemical vapor deposition (CVD) with CH 4 as carbon source. Electron backscattered scattering diffraction (EBSD) characterization demonstrates that the Cu foil surface after the H 2 -assisted pre-annealing was almost composed of Cu(1 0 0) crystal facet with larger grain size of ∼100 μm; meanwhile, the Cu film surface involved a variety of crystal facets of Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0), with the relatively small grain size of ∼10 μm. The different surface structure led to the distinctive influences of the CH 4 and H 2 concentrations on the thickness and quality of as-grown graphene. Further data demonstrate that the Cu foil enabled more nucleation densities and faster growth rates at the initial growth stages than the Cu film. Our results are beneficial for understanding the relationship between the metal surface structure and graphene CVD growth

  17. Performance of CVD and CVR coated carbon-carbon in high temperature hydrogen

    Science.gov (United States)

    Adams, J. W.; Barletta, R. E.; Svandrlik, J.; Vanier, P. E.

    As a part of the component development process for the particle bed reactor (PBR), it is necessary to develop coatings which will be time and temperature stable at extremely high temperatures in flowing hydrogen. These coatings must protect the underlying carbon structure from attack by the hydrogen coolant. Degradation which causes small changes in the reactor component, e.g. hole diameter in the hot frit, can have a profound effect on operation. The ability of a component to withstand repeated temperature cycles is also a coating development issue. Coatings which crack or spall under these conditions would be unacceptable. While refractory carbides appear to be the coating material of choice for carbon substrates being used in PBR components, the method of applying these coatings can have a large effect on their performance. Two deposition processes for these refractory carbides, chemical vapor deposition (CVD) and chemical vapor reaction (CVR), have been evaluated. Screening tests for these coatings consisted of testing of coated 2-D and 3-D weave carbon-carbon in flowing hot hydrogen at one atmosphere. Carbon loss from these samples was measured as a function of time. Exposure temperatures up to 3,000 K were used, and samples were exposed in a cyclical fashion cooling to room temperature between exposures. The results of these measurements are presented along with an evaluation of the relative merits of CVR and CVD coatings for this application.

  18. Effect of a Balanced Concentration of Hydrogen on Graphene CVD Growth

    Directory of Open Access Journals (Sweden)

    S. Chaitoglou

    2016-01-01

    Full Text Available The extraordinary properties of graphene make it one of the most interesting materials for future applications. Chemical vapor deposition (CVD is the synthetic method that permits obtaining large areas of monolayer graphene. To achieve this, it is important to find the appropriate conditions for each experimental system. In our CVD reactor working at low pressure, important factors appear to be the pretreatment of the copper substrate, considering both its cleaning and its annealing before the growing process. The carbon precursor/hydrogen flow ratio and its modification during the growth are significant in order to obtain large area graphene crystals with few defects. In this work, we have focused on the study of the methane and the hydrogen flows to control the production of single layer graphene (SLG and its growth time. In particular, we observe that hydrogen concentration increases during a usual growing process (keeping stable the methane/hydrogen flow ratio resulting in etched domains. In order to balance this increase, a modification of the hydrogen flow results in the growth of smooth hexagonal SLG domains. This is a result of the etching effect that hydrogen performs on the growing graphene. It is essential, therefore, to study the moderated presence of hydrogen.

  19. Micro-structures and mechanical properties of Nb/Re layered composite produced by CVD

    Energy Technology Data Exchange (ETDEWEB)

    Chen Li [State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals, Kunming, Yunnan 650106 (China); Faculty of Materials and Engineering, Kunming University of Science and Technology, Kunming, Yunnan 650093 (China); Kunming Institute of Precious Metals, Kunming, Yunnan 650106 (China); Wei Yan; Zhu Shaowu; Cai Hongzhong; Mao Chuanjun [Faculty of Materials and Engineering, Kunming University of Science and Technology, Kunming, Yunnan 650093 (China); Hu Changyi, E-mail: hcy@ipm.com.cn [State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals, Kunming, Yunnan 650106 (China); Faculty of Materials and Engineering, Kunming University of Science and Technology, Kunming, Yunnan 650093 (China); Kunming Institute of Precious Metals, Kunming, Yunnan 650106 (China)

    2012-02-28

    Highlights: Black-Right-Pointing-Pointer It was the first time to research the Nb/Re layered composites produced by CVD. Black-Right-Pointing-Pointer The thickness of the phase {chi} has a profound effect on mechanical properties of Nb/Re composites. Black-Right-Pointing-Pointer The mechanical properties of Nb/20 vol.%Re composites with phase {chi} of 1.4 {mu}m thickness are optimum. - Abstract: In this work, the relatively light niobium/rhenium (Nb/Re) layered composites were produced by chemical vapor deposition (CVD). The micro- structures including the thickness of diffusion layer, phase compositions and interphase thickness in niobium/rhenium composites were studied by SEM and XRD. The phases were consisted of Nb solid solution, {chi} and Re solid solution. It was observed that increasing of annealing temperature would result in more thick diffusion layer and {chi} zone. Prolonging annealing time at the same temperature has no profound effect on the formation of interphase {chi}. Tensile tests indicated that the strength of the as-deposited followed the rule of mixture. For Nb/20 vol.%Re layered composites in which the thickness of phase {chi} was 1.4 {mu}m, the tensile strength and elongations were about 516 MPa and 8%.

  20. Low resistive edge contacts to CVD-grown graphene using a CMOS compatible metal

    Energy Technology Data Exchange (ETDEWEB)

    Shaygan, Mehrdad; Otto, Martin; Sagade, Abhay A.; Neumaier, Daniel [Advanced Microelectronic Center Aachen, AMO GmbH, Aachen (Germany); Chavarin, Carlos A. [Lehrstuhl Werkstoffe der Elektrotechnik, Duisburg-Essen Univ., Duisburg (Germany); Innovations for High Performance Microelectronics, IHP GmbH, Frankfurt (Oder) (Germany); Bacher, Gerd; Mertin, Wolfgang [Lehrstuhl Werkstoffe der Elektrotechnik, Duisburg-Essen Univ., Duisburg (Germany)

    2017-11-15

    The exploitation of the excellent intrinsic electronic properties of graphene for device applications is hampered by a large contact resistance between the metal and graphene. The formation of edge contacts rather than top contacts is one of the most promising solutions for realizing low ohmic contacts. In this paper the fabrication and characterization of edge contacts to large area CVD-grown monolayer graphene by means of optical lithography using CMOS compatible metals, i.e. Nickel and Aluminum is reported. Extraction of the contact resistance by Transfer Line Method (TLM) as well as the direct measurement using Kelvin Probe Force Microscopy demonstrates a very low width specific contact resistance down to 130 Ωμm. The contact resistance is found to be stable for annealing temperatures up to 150 C enabling further device processing. Using this contact scheme for edge contacts, a field effect transistor based on CVD graphene with a high transconductance of 0.63 mS/μm at 1 V bias voltage is fabricated. (copyright 2017 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  1. GaN CVD Reactions: Hydrogen and Ammonia Decomposition and the Desorption of Gallium

    International Nuclear Information System (INIS)

    Bartram, Michael E.; Creighton, J. Randall

    1999-01-01

    Isotopic labeling experiments have revealed correlations between hydrogen reactions, Ga desorption, and ammonia decomposition in GaN CVD. Low energy electron diffraction (LEED) and temperature programmed desorption (TPD) were used to demonstrate that hydrogen atoms are available on the surface for reaction after exposing GaN(0001) to deuterium at elevated temperatures. Hydrogen reactions also lowered the temperature for Ga desorption significantly. Ammonia did not decompose on the surface before hydrogen exposure. However, after hydrogen reactions altered the surface, N 15 H 3 did undergo both reversible and irreversible decomposition. This also resulted in the desorption of N 2 of mixed isotopes below the onset of GaN sublimation, This suggests that the driving force of the high nitrogen-nitrogen bond strength (226 kcal/mol) can lead to the removal of nitrogen from the substrate when the surface is nitrogen rich. Overall, these findings indicate that hydrogen can influence G-aN CVD significantly, being a common factor in the reactivity of the surface, the desorption of Ga, and the decomposition of ammonia

  2. Heparin free coating on PLA membranes for enhanced hemocompatibility via iCVD

    Science.gov (United States)

    Wang, Hui; Shi, Xiao; Gao, Ailin; Lin, Haibo; Chen, Yongliang; Ye, Yumin; He, Jidong; Liu, Fu; Deng, Gang

    2018-03-01

    In the present work, we report one-step immobilization of nano-heparin coating on PLA membranes via initiated chemical vapor deposition (iCVD) for enhanced hemocompatibility. The nano-coating introduced onto the membrane surface via the crosslinking of P(MAA-EGDA) was confirmed by the FTIR, SEM and weight measurement respectively. The negative carboxyl groups could form the hydration interaction with the protein and platelets and electrostatic interaction with amide groups of thrombin by the mediation of antithrombin, which is similar but different with heparin. The P(MAA-EGDA) coated membranes showed suppressed platelet adhesion and prolonged clotting time (APTTs increased to 59 s, PTs increased to 20.4 s, TTs increased to 17.5 s, and the FIBs declined by 30 mg/dL). Moreover, the complement activation tests demonstrated the formation of C3a and C5a was inhibited. All results demonstrated that the nano-coating of P(MAA-EGDA) via iCVD significantly enhanced the hemocompatibility of PLA membranes, which is also applicable for various membranes.

  3. CVD growth of graphene under exfoliated hexagonal boron nitride for vertical hybrid structures

    International Nuclear Information System (INIS)

    Wang, Min; Jang, Sung Kyu; Song, Young Jae; Lee, Sungjoo

    2015-01-01

    Graphical abstract: We have demonstrated a novel yet simple method for fabricating graphene-based vertical hybrid structures by performing the CVD growth of graphene at an h-BN/Cu interface. Our systematic Raman measurements combined with plasma etching process indicate that a graphene film is grown under exfoliated h-BN rather than on its top surface, and that an h-BN/graphene vertical hybrid structure has been fabricated. Electrical transport measurements of this h-BN/graphene, transferred on SiO2, show the carrier mobility up to approximately 2250 cm 2 V −1 s −1 . The developed method would enable the exploration of the possibility of novel hybrid structure integration with two-dimensional material systems. - Abstract: We have demonstrated a novel yet simple method for fabricating graphene-based vertical hybrid structures by performing the CVD growth of graphene at an h-BN/Cu interface. Our systematic Raman measurements combined with plasma etching process indicate that a graphene film is grown under exfoliated h-BN rather than on its top surface, and that an h-BN/graphene vertical hybrid structure has been fabricated. Electrical transport measurements of this h-BN/graphene, transferred on SiO 2 , show the carrier mobility up to approximately 2250 cm 2 V −1 s −1 . The developed method would enable the exploration of the possibility of novel hybrid structure integration with two-dimensional material systems

  4. Influence of duration time of CVD process on emissive properties of carbon nanotubes films

    Directory of Open Access Journals (Sweden)

    Stępinska Izabela

    2015-03-01

    Full Text Available In this paper various types of films made of carbon nanotubes (CNTs are presented. These films were prepared on different substrates (Al2O3, Si n-type by the two-step method. The two-step method consists of physical vapor deposition step, followed by chemical vapor deposition step (PVD/CVD. Parameters of PVD process were the same for all initial films, while the duration times of the second step - the CVD process, were different (15, 30 min.. Prepared films were characterized by scanning electron microscopy (SEM, transmission electron microscopy (TEM and field emission (FE measurements. The I-E and F-N characteristics of electron emission were discussed in terms of various forms of CNT films. The value of threshold electric field ranged from few V/μm (for CNT dispersed rarely on the surface of the film deposited on Si up to ~20 V/μm (for Al2O3 substrate.

  5. Mindfulness-Based Interventions for Weight Loss and CVD Risk Management

    Science.gov (United States)

    Fulwiler, Carl; Brewer, Judson A.; Sinnott, Sinead; Loucks, Eric B.

    2017-01-01

    Obesity affects more than one-third of U.S. adults and is a major cause of preventable morbidity and mortality, primarily from cardiovascular disease. Traditional behavioral interventions for weight loss typically focus on diet and exercise habits and often give little attention to the role of stress and emotions in the initiation and maintenance of unhealthy behaviors, which may account for their modest results and considerable variability in outcomes. Stress eating and emotional eating are increasingly recognized as important targets of weight loss interventions. Mindfulness-based interventions were specifically developed to promote greater self-efficacy in coping with stress and negative emotions, and appear to be effective for a variety of conditions. In recent years researchers have begun to study mindfulness interventions for weight loss and CVD risk management. This review describes the rationale for the use of mindfulness in interventions for weight loss and CVD risk management, summarizes the research to date, and suggests priorities for future research. PMID:28405260

  6. Electrical and thermal conductivity of low temperature CVD graphene: the effect of disorder

    International Nuclear Information System (INIS)

    Vlassiouk, Ivan; Datskos, Panos; Smirnov, Sergei; Ivanov, Ilia; Hensley, Dale; Lavrik, Nickolay V; Fulvio, Pasquale F; Dai Sheng; Meyer, Harry; Chi Miaofang

    2011-01-01

    In this paper we present a study of graphene produced by chemical vapor deposition (CVD) under different conditions with the main emphasis on correlating the thermal and electrical properties with the degree of disorder. Graphene grown by CVD on Cu and Ni catalysts demonstrates the increasing extent of disorder at low deposition temperatures as revealed by the Raman peak ratio, I G /I D . We relate this ratio to the characteristic domain size, L a , and investigate the electrical and thermal conductivity of graphene as a function of L a . The electrical resistivity, ρ, measured on graphene samples transferred onto SiO 2 /Si substrates shows linear correlation with L a -1 . The thermal conductivity, K, measured on the same graphene samples suspended on silicon pillars, on the other hand, appears to have a much weaker dependence on L a , close to K ∼ L a 1/3 . It results in an apparent ρ ∼ K 3 correlation between them. Despite the progressively increasing structural disorder in graphene grown at lower temperatures, it shows remarkably high thermal conductivity (10 2 -10 3 W K -1 m -1 ) and low electrical (10 3 -3 x 10 5 Ω) resistivities suitable for various applications.

  7. Optical characterization of single-crystal diamond grown by DC arc plasma jet CVD

    Science.gov (United States)

    Hei, Li-fu; Zhao, Yun; Wei, Jun-jun; Liu, Jin-long; Li, Cheng-ming; Lü, Fan-xiu

    2017-12-01

    Optical centers of single-crystal diamond grown by DC arc plasma jet chemical vapor deposition (CVD) were examined using a low-temperature photoluminescence (PL) technique. The results show that most of the nitrogen-vacancy (NV) complexes are present as NV- centers, although some H2 and H3 centers and B-aggregates are also present in the single-crystal diamond because of nitrogen aggregation resulting from high N2 incorporation and the high mobility of vacancies under growth temperatures of 950-1000°C. Furthermore, emissions of radiation-induced defects were also detected at 389, 467.5, 550, and 588.6 nm in the PL spectra. The reason for the formation of these radiation-induced defects is not clear. Although a Ni-based alloy was used during the diamond growth, Ni-related emissions were not detected in the PL spectra. In addition, the silicon-vacancy (Si-V)-related emission line at 737 nm, which has been observed in the spectra of many previously reported microwave plasma chemical vapor deposition (MPCVD) synthetic diamonds, was absent in the PL spectra of the single-crystal diamond prepared in this work. The high density of NV- centers, along with the absence of Ni-related defects and Si-V centers, makes the single-crystal diamond grown by DC arc plasma jet CVD a promising material for applications in quantum computing.

  8. Unequal Exposure or Unequal Vulnerability? Contributions of Neighborhood Conditions and Cardiovascular Risk Factors to Socioeconomic Inequality in Incident Cardiovascular Disease in the Multi-Ethnic Study of Atherosclerosis.

    Science.gov (United States)

    Hussein, Mustafa; Diez Roux, Ana V; Mujahid, Mahasin S; Hastert, Theresa A; Kershaw, Kiarri N; Bertoni, Alain G; Baylin, Ana

    2017-11-23

    Risk factors can drive socioeconomic inequalities in cardiovascular disease (CVD) through differential exposure and differential vulnerability. We show how econometric decomposition directly enables simultaneous, policy-oriented assessment of these two mechanisms. We specifically estimated contributions via these mechanisms of neighborhood environment and proximal risk factors to socioeconomic inequality in CVD incidence. We followed 5,608 participants in the Multi-Ethnic Study of Atherosclerosis (2000-2012) until the first CVD event (median follow-up 12.2 years). We used a summary measure of baseline socioeconomic position (SEP). Covariates included baseline demographics, neighborhood, psychosocial, behavioral, and biomedical risk factors. Using Poisson models, we decomposed the difference (inequality) in incidence rates between low- and high-SEP groups into contributions of 1) differences in covariate means (differential exposure), and 2) differences in CVD risk associated with covariates (differential vulnerability). Notwithstanding large uncertainty in neighborhood estimates, our analysis suggests that differential exposure to poorer neighborhood socioeconomic conditions, adverse social environment, diabetes, and hypertension accounts for most of inequality. Psychosocial and behavioral contributions were negligible. Further, neighborhood SEP, female gender, and White race were more strongly associated with CVD among low-SEP (vs. high-SEP) participants. These differentials in vulnerability also accounted for nontrivial portions of the inequality, and could have important implications for intervention. © The Author(s) 2017. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  9. Leisure-Time Physical Activity Reduces Total and Cardiovascular Mortality and Cardiovascular Disease Incidence in Older Adults.

    Science.gov (United States)

    Barengo, Noël C; Antikainen, Riitta; Borodulin, Katja; Harald, Kennet; Jousilahti, Pekka

    2017-03-01

    To determine whether leisure-time physical activity (LTPA) is independently associated with all-cause and cardiovascular mortality and with incidence of cardiovascular disease (CVD) and stroke in older adults. Population-based cohort study (median follow-up 11.8 years). Community, five Finnish provinces. Men and women aged 65 to 74 who participated in a baseline risk factor survey between 1997 and 2007 in Finland (N = 2,456). The study protocol included a self-administered questionnaire, health examination at the study site, and blood sample for laboratory analysis. LTPA was classified into three levels: low, moderate, high. Mortality data were obtained from the National Causes of Death Register and data on incident CVD (coronary heart disease, stroke) events from the National Hospital Discharge Register. Multifactorial-adjusted (age, area, study year, sex, smoking, body mass index, systolic blood pressure, serum cholesterol, education, marital status) risks of total mortality (moderate: hazard ratio (HR) = 0.61, 95% confidence interval (CI) = 0.50-0.74; high: HR = 0.47, 95% CI = 0.34-0.63, P for trend <.001), CVD mortality (moderate: HR = 0.46, 95% CI = 0.33-0.64; high: HR = 0.34, 95% CI = 0.20-0.59, P for trend <.001), and an incident CVD event (moderate HR = 0.69, 95% CI = 0.54-0.88; high: HR = 0.55, 95% CI = 0.38-0.79, P for trend <.001) were lower for those with moderate or high LTPA levels than for those with low LTPA levels. Further adjustment for self-reported inability to perform LTPA did not change the associations remarkably. Baseline LTPA reduces the risk of total and CVD mortality and incident CVD events in older adults independently of the major known CVD risk factors. The protective effect of LTPA is dose dependent. © 2016, Copyright the Authors Journal compilation © 2016, The American Geriatrics Society.

  10. Future prospect of remote Cat-CVD on the basis of the production, transportation and detection of H atoms

    International Nuclear Information System (INIS)

    Umemoto, Hironobu; Matsumura, Hideki

    2008-01-01

    The future prospect of remote Cat-CVD, in which the decomposition and the deposition chambers are separated, is discussed on the basis of the absolute density measurements of H atoms. It is now well recognized that uniform deposition is possible on a large area without plasma damages by Cat-CVD. However, we may not overlook the demerits in Cat-CVD. One of the demerits is the poisoning of the catalyzer surfaces by the material gases, both temporary and permanent. One technique to overcome this problem is remote Cat-CVD. The question is how to separate the decomposition and deposition areas. If the separation is not enough, there should be back diffusion of the material gases, which will poison the catalyzers. If the separation is too tight, radicals may not effuse out from the decomposition chamber. These problems are discussed and it is shown that SiO 2 coating to reduce the radical recombination rates on walls is promising. The possibility of the polytetrafluoroethene coating by Cat-CVD is also discussed

  11. Snoring, daytime sleepiness, and incident cardiovascular disease in the health, aging, and body composition study.

    Science.gov (United States)

    Endeshaw, Yohannes; Rice, Thomas B; Schwartz, Ann V; Stone, Katie L; Manini, Todd M; Satterfield, Suzanne; Cummings, Steven; Harris, Tamara; Pahor, Marco

    2013-11-01

    To examine the association between snoring and incident cardiovascular disease (CVD). This is a prospective study in which community dwelling older adults were evaluated at baseline, and followed up for an average of 9.9 years. Data on snoring, daytime sleepiness, as well as demographic and clinical characteristics of study participants was collected at baseline, and participants were followed up every six months for an average of 9.9 years. Based on snoring and sleepiness status, 4 groups of participants were created: (1) No Snoring, No Sleepiness; (2) No Snoring, Sleepiness; (3) Snoring, No Sleepiness; (4) Snoring, Sleepiness. Incident CVD was defined as a diagnosis of myocardial infarction, angina pectoris, or congestive heart failure that resulted in overnight hospitalization during the follow-up period. Cox proportional hazard was used to estimate the risk of incident cardiovascular disease during follow-up by baseline snoring and sleepiness status. A total of 2,320 participants with a mean age of 73.6 (2.9) years at baseline were included in the analysis. Fifty-two percent were women, and 58% were white. A total of 543 participants developed CVD events during the follow-up period. Participants who reported snoring associated with daytime sleepiness had significantly increased hazard ratio for CVD events (HR = 1.46 [1.03-2.08], P = 0.035) after adjusting for demographic and clinical confounding factors. The results suggest that self-reported snoring and daytime sleepiness status are associated with an increased risk of future cardiovascular disease among older adults.

  12. Mediterranean Alcohol-Drinking Pattern and the Incidence of Cardiovascular Disease and Cardiovascular Mortality: The SUN Project

    Directory of Open Access Journals (Sweden)

    Aitor Hernandez-Hernandez

    2015-11-01

    Full Text Available Background: We assessed the still unclear effect of the overall alcohol-drinking pattern, beyond the amount of alcohol consumed, on the incidence of cardiovascular clinical disease (CVD. Methods: We followed 14,651 participants during up to 14 years. We built a score assessing simultaneously seven dimensions of alcohol consumption to capture the conformity to a traditional Mediterranean alcohol-drinking pattern (MADP. It positively scored moderate alcohol intake, alcohol intake spread out over the week, low spirit consumption, preference for wine, red wine consumption, wine consumed during meals and avoidance of binge drinking. Results: During 142,177 person-years of follow-up, 127 incident cases of CVD (myocardial infarction, stroke or cardiovascular mortality were identified. Compared with the category of better conformity with the MADP, the low-adherence group exhibited a non-significantly higher risk (HR of total CVD ((95% CI = 1.55 (0.58–4.16. This direct association with a departure from the traditional MADP was even stronger for cardiovascular mortality (HR (95% CI = 3.35 (0.77–14.5. Nevertheless, all these associations were statistically non-significant. Conclusion: Better conformity with the MADP seemed to be associated with lower cardiovascular risk in most point estimates; however, no significant results were found and more powered studies are needed to clarify the role of the MADP on CVD.

  13. Comparación de las lesiones no mortales por accidente de trabajo por Comunidades Autónomas en España (1994-2004 Comparison of non-fatal occupational injuries by autonomous communities in Spain (1994-2004

    Directory of Open Access Journals (Sweden)

    María López-Ruiz

    2009-12-01

    Full Text Available Objetivos: Dadas las diferencias observadas en estudios previos de la incidencia de lesiones por accidente de trabajo (LAT por Comunidades Autónomas (CC.AA., en este estudio hemos evaluado la hipótesis de homogeneidad de la incidencia de las LAT para tipos específicos de accidentes y en determinadas actividades, entre 1994 y 2004. Métodos: Las LAT analizadas fueron no mortales con baja, de tipo mecánico y sobreesfuerzo, ocurridas en jornada en centro para empresas manufactureras y de la construcción. Se calculó el riesgo relativo ajustado por sexo, edad y tipo de contrato en cada una de las CC.AA. mediante la razón de LAT estandarizada, tomando como referencia las tasas de España, y estratificando según duración de la baja (menos de 16 días y más de 15 días. Resultados: El riesgo relativo ajustado de LAT según los diferentes tipos de accidentes analizados presenta una distribución heterogénea entre CC.AA. Murcia, Navarra, Baleares y País Vasco se encuentran generalmente entre las comunidades con riesgos más elevados, mientras que Castilla-León y Extremadura son las que tienen principalmente menores riesgos de sufrir una LAT. Conclusiones: La heterogeneidad en la incidencia de LAT entre CC.AA. persiste después de seleccionar una serie de formas de accidente específicas y ajustar por sexo, edad y tipo de contrato. Por ello sugerimos que, además de seguir analizando las condiciones de trabajo como explicación de esta heterogeneidad, se tengan en cuenta otras variables socioeconómicas al comparar las incidencias de LAT entre CC.AA.Objectives: Given the differences observed in previous studies with respect to occupational injury rates in Spain's autonomous communities, this study tested the homogeneity hypothesis of occupational injury for specific accident types and economic activity between 1994 and 2004. Methods: We analyzed non-fatal injuries of a mechanical nature or those due to overexertion taking place in

  14. Fish consumption and its motives in households with versus without self-reported medical history of CVD

    DEFF Research Database (Denmark)

    Pieniak, Zuzanna; Verbeke, Wim; Perez-Cueto, Federico

    2008-01-01

    countries. Methods - A cross-sectional consumer survey was carried out in November-December 2004 with representative household samples from Belgium, the Netherlands, Denmark, Poland and Spain. The sample consisted of 4,786 respondents, aged 18-84 and who were responsible for food purchasing and cooking...... level for the two CVD groups in the majority of the countries, except in Belgium where CVD+ subjects reported to eat fatty fish significantly more frequently than CVD- subjects. All respondents perceived fish as a very healthy and nutritious food product. Only Danish consumers reported a higher...... consumption. This study exemplifies the need for nutrition education and more effective communication about fish, not only to the people facing chronic diseases, but also to the broader public. European consumers are convinced that eating fish is healthy, but particular emphasis should be made...

  15. Prediction of the properties of PVD/CVD coatings with the use of FEM analysis

    International Nuclear Information System (INIS)

    Śliwa, Agata; Mikuła, Jarosław; Gołombek, Klaudiusz; Tański, Tomasz; Kwaśny, Waldemar; Bonek, Mirosław; Brytan, Zbigniew

    2016-01-01

    Highlights: • Prediction of the properties of PVD/CVD coatings with the use of (FEM) analysis. • Stress distribution in multilayer Ti/Ti(C,N)/CrN, Ti/Ti(C,N)/(Ti,Al)N coatings. • The experimental values of stresses were determined on X-ray diffraction patterns. • An FEM model was established for the purpose of building a computer simulation. - Abstract: The aim of this paper is to present the results of the prediction of the properties of PVD/CVD coatings with the use of finite element method (FEM) analysis. The possibility of employing the FEM in the evaluation of stress distribution in multilayer Ti/Ti(C,N)/CrN, Ti/Ti(C,N)/(Ti,Al)N, Ti/(Ti,Si)N/(Ti,Si)N, and Ti/DLC/DLC coatings by taking into account their deposition conditions on magnesium alloys has been discussed in the paper. The difference in internal stresses in the zone between the coating and the substrate is caused by, first of all, the difference between the mechanical and thermal properties of the substrate and the coating, and also by the structural changes that occur in these materials during the fabrication process, especially during the cooling process following PVD and CVD treatment. The experimental values of stresses were determined based on X-ray diffraction patterns that correspond to the modelled values, which in turn can be used to confirm the correctness of the accepted mathematical model for testing the problem. An FEM model was established for the purpose of building a computer simulation of the internal stresses in the coatings. The accuracy of the FEM model was verified by comparing the results of the computer simulation of the stresses with experimental results. A computer simulation of the stresses was carried out in the ANSYS environment using the FEM method. Structure observations, chemical composition measurements, and mechanical property characterisations of the investigated materials has been carried out to give a background for the discussion of the results that were

  16. Prediction of the properties of PVD/CVD coatings with the use of FEM analysis

    Energy Technology Data Exchange (ETDEWEB)

    Śliwa, Agata; Mikuła, Jarosław; Gołombek, Klaudiusz; Tański, Tomasz; Kwaśny, Waldemar; Bonek, Mirosław, E-mail: miroslaw.bonek@polsl.pl; Brytan, Zbigniew

    2016-12-01

    Highlights: • Prediction of the properties of PVD/CVD coatings with the use of (FEM) analysis. • Stress distribution in multilayer Ti/Ti(C,N)/CrN, Ti/Ti(C,N)/(Ti,Al)N coatings. • The experimental values of stresses were determined on X-ray diffraction patterns. • An FEM model was established for the purpose of building a computer simulation. - Abstract: The aim of this paper is to present the results of the prediction of the properties of PVD/CVD coatings with the use of finite element method (FEM) analysis. The possibility of employing the FEM in the evaluation of stress distribution in multilayer Ti/Ti(C,N)/CrN, Ti/Ti(C,N)/(Ti,Al)N, Ti/(Ti,Si)N/(Ti,Si)N, and Ti/DLC/DLC coatings by taking into account their deposition conditions on magnesium alloys has been discussed in the paper. The difference in internal stresses in the zone between the coating and the substrate is caused by, first of all, the difference between the mechanical and thermal properties of the substrate and the coating, and also by the structural changes that occur in these materials during the fabrication process, especially during the cooling process following PVD and CVD treatment. The experimental values of stresses were determined based on X-ray diffraction patterns that correspond to the modelled values, which in turn can be used to confirm the correctness of the accepted mathematical model for testing the problem. An FEM model was established for the purpose of building a computer simulation of the internal stresses in the coatings. The accuracy of the FEM model was verified by comparing the results of the computer simulation of the stresses with experimental results. A computer simulation of the stresses was carried out in the ANSYS environment using the FEM method. Structure observations, chemical composition measurements, and mechanical property characterisations of the investigated materials has been carried out to give a background for the discussion of the results that were

  17. The impact of substituting SFA in dairy products with MUFA or PUFA on CVD risk: evidence from human intervention studies.

    Science.gov (United States)

    Livingstone, Katherine M; Lovegrove, Julie A; Givens, D Ian

    2012-12-01

    With the substantial economic and social burden of CVD, the need to modify diet and lifestyle factors to reduce risk has become increasingly important. Milk and dairy products, being one of the main contributors to SFA intake in the UK, are a potential target for dietary SFA reduction. Supplementation of the dairy cow's diet with a source of MUFA or PUFA may have beneficial effects on consumers' CVD risk by partially replacing milk SFA, thus reducing entry of SFA into the food chain. A total of nine chronic human intervention studies have used dairy products, modified through bovine feeding, to establish their effect on CVD risk markers. Of these studies, the majority utilised modified butter as their primary test product and used changes in blood cholesterol concentrations as their main risk marker. Of the eight studies that measured blood cholesterol, four reported a significant reduction in total and LDL-cholesterol (LDL-C) following chronic consumption of modified milk and dairy products. Data from one study suggested that a significant reduction in LDL-C could be achieved in both the healthy and hypercholesterolaemic population. Thus, evidence from these studies suggests that consumption of milk and dairy products with modified fatty acid composition, compared with milk and dairy products of typical milk fat composition, may be beneficial to CVD risk in healthy and hypercholesterolaemic individuals. However, current evidence is insufficient and further work is needed to investigate the complex role of milk and cheese in CVD risk and explore the use of novel markers of CVD risk.

  18. The training and fieldwork experiences of community health workers conducting population-based, noninvasive screening for CVD in LMIC.

    Science.gov (United States)

    Abrahams-Gessel, Shafika; Denman, Catalina A; Montano, Carlos Mendoza; Gaziano, Thomas A; Levitt, Naomi; Rivera-Andrade, Alvaro; Carrasco, Diana Munguía; Zulu, Jabu; Khanam, Masuma Akter; Puoane, Thandi

    2015-03-01

    Cardiovascular disease (CVD) is on the rise in low- and middle-income countries and is proving difficult to combat due to the emphasis on improving outcomes in maternal and child health and infectious diseases against a backdrop of severe human resource and infrastructure constraints. Effective task-sharing from physicians or nurses to community health workers (CHW) to conduct population-based screening for persons at risk has the potential to mitigate the impact of CVD on vulnerable populations. CHW in Bangladesh, Guatemala, Mexico, and South Africa were trained to conduct noninvasive population-based screening for persons at high risk for CVD. This study sought to quantitatively assess the performance of CHW during training and to qualitatively capture their training and fieldwork experiences while conducting noninvasive screening for CVD risk in their communities. Written tests were used to assess CHW's acquisition of content knowledge during training, and focus group discussions were conducted to capture their training and fieldwork experiences. Training was effective at increasing the CHW's content knowledge of CVD, and this knowledge was largely retained up to 6 months after the completion of fieldwork. Common themes that need to be addressed when designing task-sharing with CHW in chronic diseases are identified, including language, respect, and compensation. The importance of having intimate knowledge of the community receiving services from design to implementation is underscored. Effective training for screening for CVD in community settings should have a strong didactic core that is supplemented with culture-specific adaptations in the delivery of instruction. The incorporation of expert and intimate knowledge of the communities themselves is critical, from the design to implementation phases of training. Challenges such as role definition, defining career paths, and providing adequate remuneration must be addressed. Copyright © 2015 World Heart

  19. Wearable technology to reduce sedentary behavior and CVD risk in older adults: design of a randomized controlled trial.

    Science.gov (United States)

    Krehbiel, Lisa M; Layne, Andrew S; Sandesara, Bhanuprasad; Manini, Todd M; Anton, Stephen D; Buford, Thomas W

    2017-06-01

    Persons aged over 65 years account for over the vast majority of healthcare expenditures and deaths attributable to cardiovascular disease (CVD). Accordingly, reducing CVD risk among older adults is an important public health priority. Structured physical activity (i.e. exercise) is a well-documented method of decreasing CVD risk, but recent large-scale trials suggest that exercise alone is insufficient to reduce CVD events in high-risk populations of older adults. Thus adjuvant strategies appear necessary to reduce CVD risk. Accumulating evidence indicates that prolonged sedentary behavior (e.g. sitting) has detrimental health effects that are independent of engagement in recommended levels of moderate-intensity exercise. Yet clinical trials in this area are lacking. We hypothesize that exercise, when combined with a novel technology based intervention specifically designed to reduce sedentary behavior will reduce CVD risk among sedentary older adults. The purpose of this study is to evaluate the feasibility and efficacy of combining a traditional, structured exercise intervention with an innovative intervention designed to decrease sedentary behavior and increase non-exercise physical activity (NEPA). This study will provide us with critical data necessary to design and implement a full-scale trial to test our central hypothesis. Participants aged ≥60 years with moderate to high risk of coronary heart disease (CHD) events are randomly assigned to either the exercise and technology intervention (EX+NEPA) or exercise alone (EX) groups. Study dependent outcomes include changes in 1) daily activity patterns, 2) blood pressure, 3) exercise capacity, 4) waist circumference, and 5) circulating indices of cardiovascular function. This study will provide critical information for designing a fully-powered clinical trial, which could have health implications for the ever increasing population of older adults.

  20. A Conceptual Framework for Barriers to the Recruitment and Retention of Rural CVD Participants in Behavior Intervention Trials.

    Science.gov (United States)

    Young, Lufei; Montgomery, Melody; Barnason, Sue; Schmidt, Cindy; Do, Van

    2015-08-01

    Rural residents diagnosed with cardiovascular disease (CVD) or with CVD-related risks are underrepresented in behavioral intervention trials based on an extensive review of published studies. The low participation rate of rural residents weakens both the internal and external validity of published studies. Moreover, compared to urban residents, limited research exists to describe the unique barriers that limit the participation of rural residents in behavioral intervention trials. The purpose of this review is to identify a conceptual framework (CF) underpinning common barriers faced by rural CVD patients to enroll in behavioral intervention trials. We conducted a literature review using several electronic databases to obtain a representative sample of research articles, synthesized the evidence, and developed a CF to explain the barriers that may affect the research participation rate of rural residents with CVD or related risks. We found our evidence-based CF well explained the barriers for rural CVD patients to take part in behavioral intervention trials. Besides contextual factors (i.e. patient, community and research levels), other common factors impacting rural patients' intent to enroll are lack of awareness and understanding about behavioral trials, limited support from their healthcare providers and social circles, unfavorable attitudes, and the lack of opportunity to participating research. The findings demonstrate the evidence-based model consisting of interlinked multi-level factors may help our understanding of the barriers encountered by rural CVD patients participating interventions to promote behavioral change. The implication for researchers is that identifying and developing strategies to overcome the barriers precedes conducting studies in rural communities.

  1. Contribution to understanding and controlling a-Si:H thin films growth by mercury-sensitised photo-CVD

    International Nuclear Information System (INIS)

    Barhdadi, A.

    2003-09-01

    Mercury-sensitized photo-CVD technique is widely used for growing amorphous silicon thin films. This attractive method allows damage-free thin film depositions at very low substrate temperatures without the deleterious effects of the other processes. This review reports on the principle and potential of this technique. It also recalls and summarizes some fundamental issues such as experimental systems or apparatus particularities, the analysis of gas-phase reactions in the reactor, the surface-reaction model of SiH 3 and H during the film growth and all the kinetic model for lamp-induced Photo-CVD. (author)

  2. E’’ Raman Mode in Thermal Strain-Fractured CVD-MoS2

    Directory of Open Access Journals (Sweden)

    Di Wu

    2016-11-01

    Full Text Available Molybdenum disulfide (MoS2 has recently attracted considerable interests due to its unique properties and potential applications. Chemical vapor deposition (CVD method is used widely to grow large-area and high-quality MoS2 single crystals. Here, we report our investigation on thermal strain-fractured (SF single crystalline MoS2, oxidation-fractured MoS2, and normal MoS2 by atomic force microscopy (AFM, Raman and photoluminescence (PL measurements. Several new Raman modes are observed for SF-MoS2. The band gap of SF-MoS2 is enlarged by 150 meV and the PL intensity is reduced substantially. These results imply that a structural transformation occurs in SF-MoS2. Our findings here are useful for the design of MoS2-based nanocatalysts with relative high catalytic activity.

  3. Development of laser-fired contacts for amorphous silicon layers obtained by Hot-Wire CVD

    Energy Technology Data Exchange (ETDEWEB)

    Munoz, D. [XaRMAE-Universitat de Barcelona, Departament de Fisica Aplicada i Optica, Diagonal 647, Barcelona 08028 (Spain)], E-mail: delfina@eel.upc.edu; Voz, C.; Blanque, S. [Universitat Politecnica de Catalunya, Grup de Recerca en Micro i Nanotecnologies, Jordi Girona 1-3, Barcelona 08034 (Spain); Ibarz, D.; Bertomeu, J. [XaRMAE-Universitat de Barcelona, Departament de Fisica Aplicada i Optica, Diagonal 647, Barcelona 08028 (Spain); Alcubilla, R. [Universitat Politecnica de Catalunya, Grup de Recerca en Micro i Nanotecnologies, Jordi Girona 1-3, Barcelona 08034 (Spain)

    2009-03-15

    In this work we study aluminium laser-fired contacts for intrinsic amorphous silicon layers deposited by Hot-Wire CVD. This structure could be used as an alternative low temperature back contact for rear passivated heterojunction solar cells. An infrared Nd:YAG laser (1064 nm) has been used to locally fire the aluminium through the thin amorphous silicon layers. Under optimized laser firing parameters, very low specific contact resistances ({rho}{sub c} {approx} 10 m{omega} cm{sup 2}) have been obtained on 2.8 {omega} cm p-type c-Si wafers. This investigation focuses on maintaining the passivation quality of the interface without an excessive increase in the series resistance of the device.

  4. Design and application of CVD diamond windows for x-rays at the Advanced Photon Source

    International Nuclear Information System (INIS)

    Jaski, Y.; Cookson, D.

    2007-01-01

    Two types of directly cooled, 0.2-mm-thick, 8-mm-diameter clear aperture CVD diamond windows have been designed and successfully fabricated by two different vendors for use at the Advanced Photon Source (APS). Both windows contain a direct braze joint between the diamond and the cooled OFHC copper. These windows can be used to replace the front-end beryllium windows in high-heat-load applications and can be used as white beam windows in the beamlines. This paper presents the detailed design of the diamond windows, the thermal analysis of the diamond window under different thermal load configurations, as well as a complete list of the existing APS front-end beryllium window configurations and replacement scenarios. Small-angle scattering experiments have been conducted on both diamond windows and a polished beryllium window, and the results are presented.

  5. Spent Nuclear Fuel (SNF) Cold Vacuum Drying (CVD) Facility Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    IRWIN, J.J.

    1999-07-02

    This document provides the Operations Manual for the Cold Vacuum Drying Facility (CVDF). The Manual was developed in conjunction with HNF-553, Spent Nuclear Fuel Project Final Safety Analysis Report Annex B--Cold Vacuum Drying Facility. The HNF-SD-SNF-DRD-002, 1999, Cold Vacuum Drying Facility Design Requirements, Rev. 4, and the CVDF Final Design Report. The Operations Manual contains general descriptions of all the process, safety and facility systems in the CVDF, a general CVD operations sequence and references to the CVDF System Design Descriptions (SDDs). This manual has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved.

  6. Spent Nuclear Fuel (SNF) Project Cold Vacuum Drying (CVD) Facility Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    IRWIN, J.J.

    2000-02-03

    This document provides the Operations Manual for the Cold Vacuum Drying Facility (CVDF). The Manual was developed in conjunction with HNF-SD-SNF-SAR-002, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of the Processing Systems (Garvin 1998) and, the HNF-SD-SNF-DRD-002, 1997, Cold Vacuum Drying Facility Design Requirements, Rev. 3a. The Operations Manual contains general descriptions of all the process, safety and facility systems in the CVDF, a general CVD operations sequence, and has been developed for the spent nuclear fuel project (SNFP) Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved.

  7. An experimental investigation of the isotope effect in the CVD growth of diamonds

    International Nuclear Information System (INIS)

    Vakil, H.B.; Banholzer, W.F.; Kehl, R.J.; Spiro, C.L.

    1989-01-01

    An experimental investigation of the effect of isotopic substitution of hydrogen by deuterium was carried out for the chemical vapor deposition (CVD) of diamond films to determine whether the rate determining step involves a C-H or a C-C bond. Results show that if such a comparison is carried out in a proper manner the growth rate with deuterium is slower by the expected isotopic factor of the square root of 2, indicating that most likely a C-H bond is involved in the rate limiting step. Additionally, it is found that the kinetics of the atomic species generation were equally affected by the isotopic switch, strongly suggesting that the rate limiting step for that process involves the metal-H bond

  8. Ferramentas odontológicas de Si3N4 revestidas com diamante CVD

    OpenAIRE

    Salgueiredo, Ermelinda da Conceição Portela

    2008-01-01

    Os filmes de diamante depositados por deposição Química em Fase Vapor (CVD) apresentam um grande potencial para aplicação como brocas para odontologia. No presente trabalho, brocas de cerâmicos à base de nitreto de silício, Si3N4, foram produzidas a partir de pós comerciais, sinterizadas sem pressão aplicada e maquinadas até à forma final, usando como modelo uma broca comercial de aço. O nitreto de silício usado como substrato garante elevados níveis de adesão para os fil...

  9. CVD Synthesis of Hierarchical 3D MWCNT/Carbon-Fiber Nanostructures

    Directory of Open Access Journals (Sweden)

    Toma Susi

    2008-01-01

    Full Text Available Multiwalled carbon nanotubes (MWCNTs were synthesized by CVD on industrially manufactured highly crystalline vapor-grown carbon fibers (VGCFs. Two catalyst metals (Ni and Fe and carbon precursor gases (C2H2 and CO were studied. The catalysts were deposited on the fibers by sputtering and experiments carried out in two different reactors. Samples were characterized by electron microscopy (SEM and TEM. Iron was completely inactive as catalyst with both C2H2 and CO for reasons discussed in the paper. The combination of Ni and C2H2 was very active for secondary CNT synthesis, without any pretreatment of the fibers. The optimal temperature for CNT synthesis was 750∘C, with total gas flow of 650 cm3min⁡−1 of C2H2, H2, and Ar in 1.0:6.7:30 ratio.

  10. Visible light irradiation-induced conductivity change for CVD-grown graphene on different substrates

    Science.gov (United States)

    Li, Xiangdi; Zhang, Peng; Liu, Xianming; Cao, Xueying; Lei, Xiaohua; Chen, Weimin

    2017-08-01

    This research examines the influence of lighting on the electrical properties of graphene on different substrates, including PET, glass and SiO2, which are the most widely used substrate materials representing the flexible and rigid applications. The graphene sheets were prepared by CVD and subsequently transferred to three substrates. The resistances of graphene under periodic visible light irradiation were measured inside a vacuum chamber. Results show that the resistances for graphene samples on all substrates increased slowly under lighting, while decreased slowly as well after the light was switched off. The change degree and speed were different for graphene on different substrates, which were influenced as well by the illumination time, environment atmosphere and irradiation power. Graphene on flexible PET substrate is more stable than that on other substrates.

  11. The CVD graphene transfer procedure introduces metallic impurities which alter the graphene electrochemical properties.

    Science.gov (United States)

    Ambrosi, Adriano; Pumera, Martin

    2014-01-07

    High quality graphene films can be fabricated by chemical vapor deposition (CVD) using Ni and Cu as catalytic substrates. Such a synthesis procedure always requires a subsequent transfer process to be performed in order to eliminate the metallic substrate and transfer the graphene onto the desired surface. We show here that such a transfer process causes significant contamination of the graphene film with residual Fe and Ni metal impurities. Fe contamination derives from the use of Fe-based etching solutions to dissolve Ni (or Cu) substrates, while residual Ni (or Cu) is due to an incomplete metal substrate etching. The presence of these metallic impurities within the transferred graphene film affects tremendously its electrochemical behavior when adopted as an electrode material.

  12. Structure and transport properties of the interface between CVD-grown graphene domains

    Science.gov (United States)

    Ogawa, Yui; Komatsu, Katsuyoshi; Kawahara, Kenji; Tsuji, Masaharu; Tsukagoshi, Kazuhito; Ago, Hiroki

    2014-06-01

    During the chemical vapor deposition (CVD) growth of graphene, graphene domains grown on a Cu surface merge together and form a uniform graphene sheet. For high-performance electronics and other applications, it is important to understand the interfacial structure of the merged domains, as well as their influence on the physical properties of graphene. We synthesized large hexagonal graphene domains with controlled orientations on a heteroepitaxial Cu film and studied the structure and properties of the interfaces between the domains mainly merged with the same angle. Although the merged domains have various interfaces with/without wrinkles and/or increased defect-related Raman D-band intensity, the intra-domain transport showed higher carrier mobility reaching 20 000 cm2 V-1 s-1 on SiO2 at 280 K (the mean value was 7200 cm2 V-1 s-1) than that measured for inter-domain areas, 6400 cm2 V-1 s-1 (mean value 2000 cm2 V-1 s-1). The temperature dependence of the mobility suggests that impurity scattering dominates at the interface even for the merged domains with the same orientation. This study highlights the importance of domain interfaces, especially on the carrier transport properties, in CVD-grown graphene.During the chemical vapor deposition (CVD) growth of graphene, graphene domains grown on a Cu surface merge together and form a uniform graphene sheet. For high-performance electronics and other applications, it is important to understand the interfacial structure of the merged domains, as well as their influence on the physical properties of graphene. We synthesized large hexagonal graphene domains with controlled orientations on a heteroepitaxial Cu film and studied the structure and properties of the interfaces between the domains mainly merged with the same angle. Although the merged domains have various interfaces with/without wrinkles and/or increased defect-related Raman D-band intensity, the intra-domain transport showed higher carrier mobility reaching 20

  13. Design and Application of CVD Diamond Windows for X-Rays at the Advanced Photon Source

    International Nuclear Information System (INIS)

    Jaski, Yifei; Cookson, David

    2007-01-01

    Two types of directly cooled, 0.2-mm-thick, 8-mm-diameter clear aperture CVD diamond windows have been designed and successfully fabricated by two different vendors for use at the Advanced Photon Source (APS). Both windows contain a direct braze joint between the diamond and the cooled OFHC copper. These windows can be used to replace the front-end beryllium windows in high-heat-load applications and can be used as white beam windows in the beamlines. This paper presents the detailed design of the diamond windows, the thermal analysis of the diamond window under different thermal load configurations, as well as a complete list of the existing APS front-end beryllium window configurations and replacement scenarios. Small-angle scattering experiments have been conducted on both diamond windows and a polished beryllium window, and the results are presented

  14. Development of laser-fired contacts for amorphous silicon layers obtained by Hot-Wire CVD

    International Nuclear Information System (INIS)

    Munoz, D.; Voz, C.; Blanque, S.; Ibarz, D.; Bertomeu, J.; Alcubilla, R.

    2009-01-01

    In this work we study aluminium laser-fired contacts for intrinsic amorphous silicon layers deposited by Hot-Wire CVD. This structure could be used as an alternative low temperature back contact for rear passivated heterojunction solar cells. An infrared Nd:YAG laser (1064 nm) has been used to locally fire the aluminium through the thin amorphous silicon layers. Under optimized laser firing parameters, very low specific contact resistances (ρ c ∼ 10 mΩ cm 2 ) have been obtained on 2.8 Ω cm p-type c-Si wafers. This investigation focuses on maintaining the passivation quality of the interface without an excessive increase in the series resistance of the device.

  15. Spent Nuclear Fuel (SNF) Project Cold Vacuum Drying (CVD) Facility Operations Manual

    International Nuclear Information System (INIS)

    IRWIN, J.J.

    2000-01-01

    This document provides the Operations Manual for the Cold Vacuum Drying Facility (CVDF). The Manual was developed in conjunction with HNF-SD-SNF-SAR-002, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of the Processing Systems (Garvin 1998) and, the HNF-SD-SNF-DRD-002, 1997, Cold Vacuum Drying Facility Design Requirements, Rev. 3a. The Operations Manual contains general descriptions of all the process, safety and facility systems in the CVDF, a general CVD operations sequence, and has been developed for the spent nuclear fuel project (SNFP) Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved

  16. Photodecomposition of Hg - Photo - CVD monosilane. Application to hydrogenated amorphous silicon thin films

    International Nuclear Information System (INIS)

    Aka, B.

    1989-04-01

    The construction of a Hg-photo-CVD device is discussed. The system enables the manufacturing of hydrogenous thin films of amorphous silicon from monosilane compound. The reaction mechanisms taking place in the gaseous phase and at the surface, and the optimal conditions for the amorphous silicon film growth are studied. The analysis technique is based on the measurement of the difference between the condensation points of the gaseous components of the mixture obtained from the monosilane photolysis. A kinetic simplified model is proposed. Conductivity measurements are performed and the heat treatment effects are analyzed. Trace amounts of oxygen and carbon are found in the material. No Hg traces are detected by SIMS analysis [fr

  17. OSL and TL dosimeter characterization of boron doped CVD diamond films

    Science.gov (United States)

    Gonçalves, J. A. N.; Sandonato, G. M.; Meléndrez, R.; Chernov, V.; Pedroza-Montero, M.; De la Rosa, E.; Rodríguez, R. A.; Salas, P.; Barboza-Flores, M.

    2005-04-01

    Natural diamond is an exceptional prospect for clinical radiation dosimetry due to its tissue-equivalence properties and being chemically inert. The use of diamond in radiation dosimetry has been halted by the high market price; although recently the capability of growing high quality CVD diamond has renewed the interest in using diamond films as radiation dosimeters. In the present work we have characterized the dosimetric properties of diamond films synthesized by the HFCVD method. The thermoluminescence and the optically stimulated luminescence of beta exposed diamond sample containing a B/C 4000 ppm doping presents excellent properties suitable for dosimetric applications with β-ray doses up to 3.0 kGy. The observed OSL and TL performance is reasonable appropriate to justify further investigation of diamond films as dosimeters for ionizing radiation, specially in the radiotherapy field where very well localized and in vivo and real time radiation dose applications are essential.

  18. Simulation and experimental approach to CVD-FBR aluminide coatings on ferritic steels under steam oxidation

    International Nuclear Information System (INIS)

    Leal, J.; Alcala, G.; Bolivar, F.J.; Sanchez, L.; Hierro, M.P.; Perez, F.J.

    2008-01-01

    The ferritic steels used to produce structural components for steam turbines are susceptible to strong corrosion and creep damage due to the extreme working conditions pushed to increase the process efficiency and to reduce pollutants release. The response of aluminide coatings on the P-92 ferritic steel, deposited by CVD-FBR, during oxidation in a simulated steam environment was studied. The analyses were performed at 650 deg. C in order to simulate the working conditions of a steam turbine, and 800 deg. C in order to produce a critical accelerated oxidation test. The Thermo-Calc software was used to predict the different solid phases that could be generated during the oxidation process, in both, coated and uncoated samples. In order to validate the thermodynamic results, the oxides scales produced during steam tests were characterized by different techniques such as XRD, SEM and EDS. The preliminary results obtained are discussed in the present work

  19. Aluminum and aluminum/silicon coatings on ferritic steels by CVD-FBR technology

    International Nuclear Information System (INIS)

    Perez, F.J.; Hierro, M.P.; Trilleros, J.A.; Carpintero, M.C.; Sanchez, L.; Bolivar, F.J.

    2006-01-01

    The use of chemical vapor deposition by fluidized bed reactors (CVD-FBR) offers some advantages in comparison to other coating techniques such as pack cementation, because it allows coating deposition at lower temperatures than pack cementation and at atmospheric pressure without affecting the mechanical properties of material due to heat treatments of the bulk during coating process. Aluminum and aluminum/silicon coatings have been obtained on two different ferritics steels (P-91 and P-92). The coatings were analyzed using several techniques like SEM/EDX and XRD. The results indicated that both coatings were form by Fe 2 Al 5 intermetallic compound, and in the co-deposition the Si was incorporated to the Fe 2 Al 5 structure in small amounts

  20. Growth of Boron-Rich Nanowires by Chemical Vapor Deposition (CVD

    Directory of Open Access Journals (Sweden)

    H. J. Kleebe

    2006-11-01

    Full Text Available B-rich nanowires are grown on Ni coated oxidized Si(111 substrate using diborane as the gas precursor in a CVD process at 20 torr and 900C∘. These nanowires have diameters around 20–100 nanometers and lengths up to microns. Icosahedron B12 is shown to be the basic building unit forming the amorphous B-rich nanowires as characterized by EDAX, XRD, XPS, and Raman spectroscopies. The gas chemistry at low [B2H6]/ [N2] ratio is monitored by the in situ mass spectroscopy, which identified N2 as an inert carrier gas leading to formation of the B-rich compounds. A nucleation controlled growth mechanism is proposed to explain the rugged nanowire growth of boron. The role of the Ni catalyst in the synthesis of the B-rich nanostructures is also discussed.

  1. Carbon-coated hexagonal magnetite nanoflakes production by spray CVD of alcohols in mixture with water

    Science.gov (United States)

    Reyes-Reyes, Marisol; Hernández-Arriaga, Daniel; López-Sandoval, Román

    2014-12-01

    In this study, we report a successful technique for synthesizing magnetite hexagonal nanoflakes coated with carbon layers using spray thermal decomposition, which is a reproducible method that is easy to scale up. We investigated the effects of mixing different volumes of deionized (DI) water with alcohol on the population and quality of single-crystalline Fe3O4 hexagonal nanoflakes. Methanol and ethanol were used as the carbon and oxygen source, while ferrocene was mainly used as the Fe source. To obtain a large quantity of hexagonal structures, a strongly oxidative atmosphere was required. The DI water was used to enhance the oxidative environment during the reaction and was an important component for obtaining well-shaped hexagonal magnetite crystalline nanoflakes. The use of alcohols, water and the spray chemical vapor deposition (CVD) method make this procedure easy to use. In addition, this method provides a one-step process for synthesizing carbon-coated hexagonal Fe3O4 nanocrystals.

  2. Fast method for reactor and feature scale coupling in ALD and CVD

    Energy Technology Data Exchange (ETDEWEB)

    Yanguas-Gil, Angel; Elam, Jeffrey W.

    2017-08-08

    Transport and surface chemistry of certain deposition techniques is modeled. Methods provide a model of the transport inside nanostructures as a single-particle discrete Markov chain process. This approach decouples the complexity of the surface chemistry from the transport model, thus allowing its application under general surface chemistry conditions, including atomic layer deposition (ALD) and chemical vapor deposition (CVD). Methods provide for determination of determine statistical information of the trajectory of individual molecules, such as the average interaction time or the number of wall collisions for molecules entering the nanostructures as well as to track the relative contributions to thin-film growth of different independent reaction pathways at each point of the feature.

  3. Synthesis and Optimization of MWCNTs on Co-Ni/MgO by Thermal CVD

    Directory of Open Access Journals (Sweden)

    H. Ryu

    2008-01-01

    Full Text Available Multiwalled carbon nanotubes (MWCNTs were prepared by the thermal chemical vapor deposition (CVD technique. Monometallic and bimetallic Co and Ni combinations were used as a catalyst on MgO support. The mixer of H2/C2H2 was used as a carbon source. The prepared CNTs were found to possess different shapes, morphologies, and sizes. Maximum yield was found for 50% Co (MgO: 50% and Ni: 0% catalyst at 600°C. Scanning electron microscopy (SEM and high-resolution transmission electron microscopy (HRTEM techniques were used for structural analysis. Raman spectra were taken to investigate the quality and crystalline perfection of the prepared CNTs. The ratio of D- and G-bands (ID/IG was measured from these spectra.

  4. Enhanced intrinsic voltage gain in artificially stacked bilayer CVD graphene field effect transistors

    Energy Technology Data Exchange (ETDEWEB)

    Pandey, Himadri; Kataria, Satender [RWTH Aachen University, Chair for Electronic Devices, Aachen (Germany); University of Siegen, School of Science and Technology, Siegen (Germany); Aguirre-Morales, Jorge-Daniel; Fregonese, Sebastien; Zimmer, Thomas [IMS Laboratory, Centre National de la Recherche Scientifique, University of Bordeaux, Talence (France); Passi, Vikram [University of Siegen, School of Science and Technology, Siegen (Germany); AMO GmbH, Advanced Microelectronics Center Aachen (Germany); Iannazzo, Mario; Alarcon, Eduard [Technical University of Catalonia, Department of Electronics Engineering, UPC, Barcelona (Spain); Lemme, Max C. [RWTH Aachen University, Chair for Electronic Devices, Aachen (Germany); University of Siegen, School of Science and Technology, Siegen (Germany); AMO GmbH, Advanced Microelectronics Center Aachen (Germany)

    2017-11-15

    We report on electronic transport in dual-gate, artificially stacked bilayer graphene field effect transistors (BiGFETs) fabricated from large-area chemical vapor deposited (CVD) graphene. The devices show enhanced tendency to current saturation, which leads to reduced minimum output conductance values. This results in improved intrinsic voltage gain of the devices when compared to monolayer graphene FETs. We employ a physics based compact model originally developed for Bernal stacked bilayer graphene FETs (BSBGFETs) to explore the observed phenomenon. The improvement in current saturation may be attributed to increased charge carrier density in the channel and thus reduced saturation velocity due to carrier-carrier scattering. (copyright 2017 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  5. Superconductivity and low temperature electrical transport in B-doped CVD nanocrystalline diamond

    Directory of Open Access Journals (Sweden)

    Milos Nesladek, Jiri J. Mares, Dominique Tromson, Christine Mer, Philippe Bergonzo, Pavel Hubik and Jozef Kristofik

    2006-01-01

    Full Text Available In this work, we report on superconductivity (SC found in thin B-doped nanocrystalline diamond films, prepared by the PE-CVD technique. The thickness of the films varies from about 100 to 400 nm, the films are grown on low-alkaline glass at substrate temperatures of about 500–700 °C. The SIMS measurements show that films can be heavily doped with boron in concentrations in the range of 3×1021 cm−3. The Raman spectra show Fano resonances, confirming the substitutional B-incorporation. The low temperature magnetotransport measurements reveal a positive magnetoresistance. The SC transition is observed at about Tc=1.66 K. A simple theory exploiting the concept of weak localization accounting for this transition is proposed.

  6. Electronic structure of polycrystalline CVD-graphene revealed by Nano-ARPES

    Science.gov (United States)

    Chen, Chaoyu; Avila, José; Asensio, Maria C.

    2017-06-01

    The ability to explore electronic structure and their role in determining material’s macroscopic behaviour is essential to explain and engineer functions of material and device. Since its debut in 2004, graphene has attracted global research interest due to its unique properties. Chemical vapor deposition (CVD) has emerged as an important method for the massive preparation and production of graphene for various applications. Here by employing angle-resolved photoemission spectroscopy with nanoscale spatial resolution ∼ 100 nm (Nano-ARPES), we describe the approach to measure the electronic structure of polycrystalline graphene on copper foils, demonstrating the power of Nano-ARPES to detect the electronic structure of microscopic single crystalline domains, being fully compatible with conventional ARPES. Similar analysis could be employed to other microscopic materials

  7. A CVD diamond detector for (n,α) cross-section measurements

    International Nuclear Information System (INIS)

    Weiss, C.

    2014-01-01

    A novel detector based on the chemical vapor deposition (CVD) diamond technology has been developed in the framework of this PhD, for the experimental determination of (n,α) cross-sections at the neutron time-of-flight facility n⎽TOF at CERN. The 59 Ni(n,α) 56 Fe cross-section, which is relevant for astrophysical questions as well as for risk-assessment studies in nuclear technology, has been measured in order to validate the applicability of the detector for such experiments. The thesis is divided in four parts. In the introductory part the motivation for measuring (n,α) cross-sections, the experimental challenges for such measurements and the reasons for choosing the CVD diamond technology for the detector are given. This is followed by the presentation of the n⎽TOF facility, an introduction to neutron-induced nuclear reactions and a brief summary of the interaction of particles with matter. The CVD diamond technology and the relevant matters related to electronics are given as well in this first part of the thesis. The second part is dedicated to the design and production of the Diamond Mosaic-Detector (DM-D) and its characterization. The 59 Ni(n,α) 56 Fe cross-section measurement at n⎽TOF and the data analysis are discussed in detail in the third part of the thesis, before the summary of the thesis and an outlook to possible future developments and applications conclude the thesis in the forth part. In this work, the Diamond Mosaic-Detector, which consist of eight single-crystal (sCVD) diamond sensors and one 'Diamond on Iridium' (DOI) sensor has proven to be well suited for (n,α) cross-section measurements for 1 MeV < E α < 22 MeV. The upper limit is given by the thickness of the sensors, d = 150 μm, while the lower limit is dictated by background induced by neutron capture reactions in in-beam materials. The cross-section measurement was focussed on the resonance integral of 59 Ni(n,α) 56 Fe at E n = 203 eV, with the aim of clarifying

  8. Randschicht- und durchgreifendes Härten von 42CrMo4 nach CVD-Beschichtung

    DEFF Research Database (Denmark)

    Pantleon, Karen; Kessler, Olaf; Hoffmann, Franz

    1999-01-01

    the properties of steel substrates ready for operation. Bulk hardening and induction surface hardening as two different post-deposition heat treatments are applied on TiN-coated 42CrMo4 (AISI 4140) substrates. The results show great advantages of induction surface hardening because only low distortion appear......The properties of hard coatings deposited using CVD-processes are usually excellent. However, high deposition temperatures may negativelly influence the properties of the steel substrates, especially in the case of low alloyed steels. Therefore, a subsequent heat treatment is necessary to restore...... and the properties of the steel substrates are improved without loosing good coating properties. Thereby, the properties of the steel substrates can be influenced by the parameters of induction heating in a wide range....

  9. Size modulation of nanocrystalline silicon embedded in amorphous silicon oxide by Cat-CVD

    International Nuclear Information System (INIS)

    Matsumoto, Y.; Godavarthi, S.; Ortega, M.; Sanchez, V.; Velumani, S.; Mallick, P.S.

    2011-01-01

    Different issues related to controlling size of nanocrystalline silicon (nc-Si) embedded in hydrogenated amorphous silicon oxide (a-SiO x :H) deposited by catalytic chemical vapor deposition (Cat-CVD) have been reported. Films were deposited using tantalum (Ta) and tungsten (W) filaments and it is observed that films deposited using tantalum filament resulted in good control on the properties. The parameters which can affect the size of nc-Si domains have been studied which include hydrogen flow rate, catalyst and substrate temperatures. The deposited samples are characterized by X-ray diffraction, HRTEM and micro-Raman spectroscopy, for determining the size of the deposited nc-Si. The crystallite formation starts for Ta-catalyst around the temperature of 1700 o C.

  10. Simulation and experimental approach to CVD-FBR aluminide coatings on ferritic steels under steam oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Leal, J. [Universidad Complutense de Madrid, Dep. CC. Materiales e Ingenieria Metalurgica, Avenida Complutense s/n, Facultad de Ciencias Quimicas, 28040 Madrid (Spain); Alcala, G. [Universidad Complutense de Madrid, Dep. CC. Materiales e Ingenieria Metalurgica, Avenida Complutense s/n, Facultad de Ciencias Quimicas, 28040 Madrid (Spain)], E-mail: galcades@yahoo.es; Bolivar, F.J.; Sanchez, L.; Hierro, M.P.; Perez, F.J. [Universidad Complutense de Madrid, Dep. CC. Materiales e Ingenieria Metalurgica, Avenida Complutense s/n, Facultad de Ciencias Quimicas, 28040 Madrid (Spain)

    2008-07-15

    The ferritic steels used to produce structural components for steam turbines are susceptible to strong corrosion and creep damage due to the extreme working conditions pushed to increase the process efficiency and to reduce pollutants release. The response of aluminide coatings on the P-92 ferritic steel, deposited by CVD-FBR, during oxidation in a simulated steam environment was studied. The analyses were performed at 650 deg. C in order to simulate the working conditions of a steam turbine, and 800 deg. C in order to produce a critical accelerated oxidation test. The Thermo-Calc software was used to predict the different solid phases that could be generated during the oxidation process, in both, coated and uncoated samples. In order to validate the thermodynamic results, the oxides scales produced during steam tests were characterized by different techniques such as XRD, SEM and EDS. The preliminary results obtained are discussed in the present work.

  11. Study of leakage currents in pCVD diamonds as function of the magnetic field

    CERN Document Server

    Müller, S; Schneider, M; Sabellek, A; Schmanau, M; Rühle, C; Schneider, T; Hall-Wilton, R

    2009-01-01

    pCVD diamond sensors are regularly used as beam loss monitors in accelerators by measuring the ionization of the lost particles. In the past these beam loss monitors showed sudden increases in the dark leakage current without beam losses and these erratic leakage currents were found to decrease, if magnetic fields were present. Here we report on a systematic study of leakage currents inside a magnetic field. The decrease of erratic currents in a magnetic field was confirmed. On the contrary, diamonds without erratic currents showed an increase of the leakage current in a magnetic field perpendicular to the electric field for fields up to 0.6T, for higher fields it decreases. A preliminary model is introduced to explain the observations.

  12. SU-E-T-153: Detector-Grade CVD Diamond for Radiotherapy Dosimetry.

    Science.gov (United States)

    Lansley, S; Betzel, G; McKay, D; Meyer, J

    2012-06-01

    To evaluate the use of commercially available detector-grade synthetic diamond films made via chemical vapor deposition (CVD) as x- ray detectors for radiotherapy dosimetry. A detector was fabricated using high-quality single crystal CVD diamond films (0.5 × 3 × 3 mm̂3) with 0.4 mm̂3 sensitive volumes, which were encapsulated with PMMA. The detector was placed in a (30 × 30 × 30 cm̂3) PTW water phantom. Six- and ten-MV photons from an Elekta Synergy linac were measured using an SSD of 90 cm and typically a 10-cm phantom depth with a 10 × 10 cm̂2 field size in the central axis of the beam. Data acquisition was performed using a PTW UNIDOS E electrometer with a 100-V bias. The detector was evaluated by measuring leakage current, priming dose, response dynamics, dose linearity, dependence on dose rate, percent depth dose (6 and 10 MV photons) and output factors. Some measurements were compared with a Si diode detector, 0.04 and/or 0.13-cc ion chamber(s). Leakage currents were negligible (∼1 pA) given the overall average sensitivity of the material (680 nC/Gy at 100 V). Detector current rise and fall times were detectors as expected. The type of diamond tested has potential to be used for small field dosimetry due to its small sensitive volume and high sensitivity. Further experiments are ongoing and detector packaging is yet to be optimized. © 2012 American Association of Physicists in Medicine.

  13. The CVD graphene transfer procedure introduces metallic impurities which alter the graphene electrochemical properties

    Science.gov (United States)

    Ambrosi, Adriano; Pumera, Martin

    2013-12-01

    High quality graphene films can be fabricated by chemical vapor deposition (CVD) using Ni and Cu as catalytic substrates. Such a synthesis procedure always requires a subsequent transfer process to be performed in order to eliminate the metallic substrate and transfer the graphene onto the desired surface. We show here that such a transfer process causes significant contamination of the graphene film with residual Fe and Ni metal impurities. Fe contamination derives from the use of Fe-based etching solutions to dissolve Ni (or Cu) substrates, while residual Ni (or Cu) is due to an incomplete metal substrate etching. The presence of these metallic impurities within the transferred graphene film affects tremendously its electrochemical behavior when adopted as an electrode material.High quality graphene films can be fabricated by chemical vapor deposition (CVD) using Ni and Cu as catalytic substrates. Such a synthesis procedure always requires a subsequent transfer process to be performed in order to eliminate the metallic substrate and transfer the graphene onto the desired surface. We show here that such a transfer process causes significant contamination of the graphene film with residual Fe and Ni metal impurities. Fe contamination derives from the use of Fe-based etching solutions to dissolve Ni (or Cu) substrates, while residual Ni (or Cu) is due to an incomplete metal substrate etching. The presence of these metallic impurities within the transferred graphene film affects tremendously its electrochemical behavior when adopted as an electrode material. Electronic supplementary information (ESI) available. See DOI: 10.1039/c3nr05230c

  14. Prediction of the properties of PVD/CVD coatings with the use of FEM analysis

    Science.gov (United States)

    Śliwa, Agata; Mikuła, Jarosław; Gołombek, Klaudiusz; Tański, Tomasz; Kwaśny, Waldemar; Bonek, Mirosław; Brytan, Zbigniew

    2016-12-01

    The aim of this paper is to present the results of the prediction of the properties of PVD/CVD coatings with the use of finite element method (FEM) analysis. The possibility of employing the FEM in the evaluation of stress distribution in multilayer Ti/Ti(C,N)/CrN, Ti/Ti(C,N)/(Ti,Al)N, Ti/(Ti,Si)N/(Ti,Si)N, and Ti/DLC/DLC coatings by taking into account their deposition conditions on magnesium alloys has been discussed in the paper. The difference in internal stresses in the zone between the coating and the substrate is caused by, first of all, the difference between the mechanical and thermal properties of the substrate and the coating, and also by the structural changes that occur in these materials during the fabrication process, especially during the cooling process following PVD and CVD treatment. The experimental values of stresses were determined based on X-ray diffraction patterns that correspond to the modelled values, which in turn can be used to confirm the correctness of the accepted mathematical model for testing the problem. An FEM model was established for the purpose of building a computer simulation of the internal stresses in the coatings. The accuracy of the FEM model was verified by comparing the results of the computer simulation of the stresses with experimental results. A computer simulation of the stresses was carried out in the ANSYS environment using the FEM method. Structure observations, chemical composition measurements, and mechanical property characterisations of the investigated materials has been carried out to give a background for the discussion of the results that were recorded during the modelling process.

  15. CVD-associated non-coding RNA, ANRIL, modulates expression of atherogenic pathways in VSMC

    Energy Technology Data Exchange (ETDEWEB)

    Congrains, Ada; Kamide, Kei [Department of Geriatric Medicine and Nephrology, Osaka University Graduate School of Medicine (Japan); Katsuya, Tomohiro [Clinical Gene Therapy, Osaka University Graduate School of Medicine (Japan); Yasuda, Osamu [Department of Cardiovascular Clinical and Translational Research, Kumamoto University Hospital (Japan); Oguro, Ryousuke; Yamamoto, Koichi [Department of Geriatric Medicine and Nephrology, Osaka University Graduate School of Medicine (Japan); Ohishi, Mitsuru, E-mail: ohishi@geriat.med.osaka-u.ac.jp [Department of Geriatric Medicine and Nephrology, Osaka University Graduate School of Medicine (Japan); Rakugi, Hiromi [Department of Geriatric Medicine and Nephrology, Osaka University Graduate School of Medicine (Japan)

    2012-03-23

    Highlights: Black-Right-Pointing-Pointer ANRIL maps in the strongest susceptibility locus for cardiovascular disease. Black-Right-Pointing-Pointer Silencing of ANRIL leads to altered expression of tissue remodeling-related genes. Black-Right-Pointing-Pointer The effects of ANRIL on gene expression are splicing variant specific. Black-Right-Pointing-Pointer ANRIL affects progression of cardiovascular disease by regulating proliferation and apoptosis pathways. -- Abstract: ANRIL is a newly discovered non-coding RNA lying on the strongest genetic susceptibility locus for cardiovascular disease (CVD) in the chromosome 9p21 region. Genome-wide association studies have been linking polymorphisms in this locus with CVD and several other major diseases such as diabetes and cancer. The role of this non-coding RNA in atherosclerosis progression is still poorly understood. In this study, we investigated the implication of ANRIL in the modulation of gene sets directly involved in atherosclerosis. We designed and tested siRNA sequences to selectively target two exons (exon 1 and exon 19) of the transcript and successfully knocked down expression of ANRIL in human aortic vascular smooth muscle cells (HuAoVSMC). We used a pathway-focused RT-PCR array to profile gene expression changes caused by ANRIL knock down. Notably, the genes affected by each of the siRNAs were different, suggesting that different splicing variants of ANRIL might have distinct roles in cell physiology. Our results suggest that ANRIL splicing variants play a role in coordinating tissue remodeling, by modulating the expression of genes involved in cell proliferation, apoptosis, extra-cellular matrix remodeling and inflammatory response to finally impact in the risk of cardiovascular disease and other pathologies.

  16. Structural and optical properties of CdO nanostructures prepared by atmospheric-pressure CVD

    International Nuclear Information System (INIS)

    Terasako, T.; Fujiwara, T.; Nakata, Y.; Yagi, M.; Shirakata, S.

    2013-01-01

    Cadmium oxide (CdO) nanostructures of various shapes were successfully grown on gold (Au) nanocolloid coated c-plane sapphire substrates by atmospheric-pressure CVD using Cd powder and H 2 O as source materials. CdO nanorods (NRs) exhibited tapered shapes and the degree of the tapering became larger with increasing substrate temperature. One of the possible reasons for the tapering behavior is the competition between the axial growth due to the vapor–liquid–solid (VLS) mechanism and the radial growth due to the vapor–solid (VS) mechanism. The influence of the competition between the two different growth mechanisms was also confirmed on the appearance of “seaweed-like” NRs. Moreover, we cannot neglect the influence of the shrinkage of catalyst particles during the growth process on the tapering behavior. In addition, there is a possibility that the temporal evolution of catalyst particles, such as diffusion, splitting, migration and coalescence, contributes not only to the disappearance of catalyst particles on the tips of the NRs, resulting in the enhancement of the radial growth relative to the axial growth, but also to the formation of nanobelts (NBs) and nanotrees (NTs). Photoacoustic measurements revealed that the absorption edge shifts towards lower energies and the absorption band below the absorption edge becomes larger with increasing T S . This tendency may be due to the increase of intrinsic defects and/or the decrease in residual impurities. - Highlights: ► Various shapes of CdO nanostructures were grown by AP-CVD using Cd and H 2 O. ► This diversity is due to the competition between VLS and VS mechanisms. ► The temporal evolution of Au catalyst particles also contributes to the diversity. ► Photoacoustic spectra were changed, depending on the substrate temperature. ► This is probably related to the intrinsic defects and/or residual impurities

  17. Effect of CVD-diamond coatings on the tribological performance of cemented tungsten carbide substrates

    Directory of Open Access Journals (Sweden)

    Kaleem Ahmad Najar

    2016-06-01

    Full Text Available A comparison has been documented between nanocrystalline diamond (NCD and microcrystalline diamond (MCD coatings deposited on cemented tungsten carbide (WC-Co substrates with architectures of WC-Co/NCD & WC-Co/MCD, using hot filament chemical vapor deposition (HFCVD technique. In the present work, the frictional characteristics were studied using ball-on-disc type linear reciprocating micro-tribometer, under the application of 1–10N normal loads, when sliding against smooth alumina (Al2O3 ceramic ball for the total duration of 15min, under dry sliding conditions. Nanoindentation tests were also conducted using Berkovich nanoindenter for the purpose of measurement of hardness and elastic modulus values. The average coefficients of friction of MCD and NCD coatings decrease from 0.37 – 0.32 and 0.3 – 0.27 respectively, when the load is increased from 1–10N. However, for conventional WC-Co substrate the average coefficient of friction increases from 0.60–0.75, under the same input operating conditions. The wear tracks formed on the surfaces of CVD-diamond coatings and WC-Co substrate, after friction measurement were characterised using Raman spectroscopy and scanning electron microscopy (SEM techniques. However, the compositional analysis for the formation of tribo-layer observed on the wear tracks of CVD-diamond coatings was confirmed using energy dispersive spectroscopy (EDS technique. Therefore, maintaining an appropriate level of normal load and using appropriate type of diamond coating, friction may be kept to some lower value to improve mechanical processes.

  18. Acute incidents during anaesthesia

    African Journals Online (AJOL)

    Incidents can occur during induction, maintenance and emergence from anaesthesia. The following acute critical incidents are discussed in this article: • Anaphylaxis. • Aspiration ..... Already used in South Africa and Malawi, a scale-up of the technique is under way in Tanzania, Rwanda and Ghana. The report found that.

  19. Relations between subclinical disease markers and type 2 diabetes, metabolic syndrome, and incident cardiovascular disease: the Jackson Heart Study.

    Science.gov (United States)

    Xanthakis, Vanessa; Sung, Jung Hye; Samdarshi, Tandaw E; Hill, Alethea N; Musani, Solomon K; Sims, Mario; Ghraibeh, Kamel A; Liebson, Philip R; Taylor, Herman A; Vasan, Ramachandran S; Fox, Ervin R

    2015-06-01

    The presence of subclinical disease measures has been directly associated with the development of cardiovascular disease (CVD) in whites. African Americans (AAs) in the U.S. are at higher risk of CVD compared with non-Hispanic whites; however, data on the prevalence of subclinical disease measures in AAs and their association to CVD remain unclear and may explain the higher CVD risk in this group. We evaluated 4,416 participants attending the first examination of the Jackson Heart Study (mean age 54 years; 64% women) with available subclinical disease measures. There were 1,155 participants (26%) with subclinical disease, defined as the presence of one or more of the following: peripheral arterial disease, left ventricular hypertrophy, microalbuminuria, high coronary artery calcium (CAC) score, and low left ventricular ejection fraction. In cross-sectional analyses using multivariable-adjusted logistic regression, participants with metabolic syndrome (MetS) or diabetes (DM) had higher odds of subclinical disease compared with those without MetS and DM (odds ratios 1.55 [95% CI 1.30-1.85] and 2.86 [95% CI 2.32-3.53], respectively). Furthermore, the presence of a high CAC score and left ventricular hypertrophy were directly associated with the incidence of CVD (265 events) in multivariable-adjusted Cox proportional hazards regression models (P disease (P disease, which in turn translated into a greater risk of CVD, especially in people with MetS and DM. © 2015 by the American Diabetes Association. Readers may use this article as long as the work is properly cited, the use is educational and not for profit, and the work is not altered.

  20. Radiological incidents in radiotherapy

    International Nuclear Information System (INIS)

    Hobzova, L.; Novotny, J.

    2008-01-01

    In many countries a reporting system of radiological incidents to national regulatory body exists and providers of radiotherapy treatment are obliged to report all major and/or in some countries all incidents occurring in institution. State Office for Nuclear Safety (SONS) is providing a systematic guidance for radiotherapy departments from 1997 by requiring inclusion of radiation safety problems into Quality assurance manual, which is the basic document for obtaining a license of SONS for handling with sources of ionizing radiation. For that purpose SONS also issued the recommendation 'Introduction of QA system for important sources in radiotherapy-radiological incidents' in which the radiological incidents are defined and the basic guidance for their classification (category A, B, C, D), investigation and reporting are given. At regular periods the SONS in co-operation with radiotherapy centers is making a survey of all radiological incidents occurring in institutions and it is presenting obtained information in synoptic communication (2003 Motolske dny, 2005 Novy Jicin). This presentation is another summary report of radiological incidents that occurred in our radiotherapy institutions during last 3 years. Emphasis is given not only to survey and statistics, but also to analysis of reasons of the radiological incidents and to their detection and prevention. Analyses of incidents in radiotherapy have led to a much broader understanding of incident causation. Information about the error should be shared as early as possible during or after investigation by all radiotherapy centers. Learning from incidents, errors and near misses should be a part of improvement of the QA system in institutions. Generally, it is recommended that all radiotherapy facilities should participate in the reporting, analyzing and learning system to facilitate the dissemination of knowledge throughout the whole country to prevent errors in radiotherapy.(authors)

  1. Multiple aberrations in shared inflammatory and oxidative & nitrosative stress (IO&NS) pathways explain the co-association of depression and cardiovascular disorder (CVD), and the increased risk for CVD and due mortality in depressed patients.

    Science.gov (United States)

    Maes, Michael; Ruckoanich, Piyanuj; Chang, Young Seun; Mahanonda, Nithi; Berk, Michael

    2011-04-29

    There is evidence that there is a bidirectional relationship between major depression and cardiovascular disorder (CVD): depressed patients are a population at risk for increased cardiac morbidity and mortality, and depression is more frequent in patients who suffer from CVD. There is also evidence that inflammatory and oxidative and nitrosative stress (IO&NS) pathways underpin the common pathophysiology of both CVD and major depression. Activation of these pathways may increase risk for both disorders and contribute to shared risk. The shared IO&NS pathways that may contribute to CVD and depression comprise the following: increased levels of pro-inflammatory cytokines, like interleukin-1β (IL-1β), IL-2, IL-6, IL-8, IL-12, tumor necrosis factor-α, and interferon-γ; T cell activation; increased acute phase proteins, like C-reactive protein, haptoglobin, fibrinogen and α1-antitrypsin; complement factors; increased LPS load through bacterial translocation and subsequent gut-derived inflammation; induction of indoleamine 2,3-dioxygenase with increased levels of tryptophan catabolites; decreased levels of antioxidants, like coenzyme Q10, zinc, vitamin E, glutathione and glutathione peroxidase; increased O&NS characterized by oxidative damage to low density lipoprotein (LDL) and phospholipid inositol, increased malondialdehyde, and damage to DNA and mitochondria; increased nitrosative stress; and decreased ω3 polyunsaturated fatty acids (PUFAs). The complex interplay between the abovementioned IO&NS pathways in depression results in pro-atherogenic effects and should be regarded as a risk factor to future clinical CVD and due mortality. We suggest that major depression should be added as a risk factor to the Charlson "comorbidity" index. It is advised that patients with (sub)chronic or recurrent major depression should routinely be assessed by serology tests to predict if they have an increased risk to cardiovascular disorders. Copyright © 2010 Elsevier Inc. All

  2. Behavioral Counseling to Promote a Healthful Diet and Physical Activity for CVD Prevention in Adults with Risk Factors

    Science.gov (United States)

    ... and health problems. cardiovascular disease Heart disease and stroke. risk factors Smoking, high blood pressure, high blood cholesterol, or ... Prevent CVD If you have one or more risk factors for heart disease or stroke and have concerns about your weight, talk with ...

  3. Support effects in the adsorption of water on CVD graphene: an ultra-high vacuum adsorption study.

    Science.gov (United States)

    Chakradhar, A; Sivapragasam, N; Nayakasinghe, M T; Burghaus, U

    2015-07-21

    Experimental data for water adsorption on CVD (chemical vapor deposition) graphene/SiO2 and graphene/Cu studied under ultra-high vacuum (UHV) conditions are discussed, focusing on support effects and hydrophobicity. Under UHV, it seems that graphene wettability is inversely related to wetting properties of the support. Graphene is not transparent to water wetting on the supports studied here.

  4. Lateral gas phase diffusion length of boron atoms over Si/B surfaces during CVD of pure boron layers

    NARCIS (Netherlands)

    Mohammadi, V.; Nihtianov, S.

    2016-01-01

    The lateral gas phase diffusion length of boron atoms, LB, along silicon and boron surfaces during chemical vapor deposition(CVD) using diborane (B2H6) is reported. The value of LB is critical for reliable and uniform boron layer coverage. The presented information was obtained experimentally and

  5. Advances in the Development of a WCl6 CVD System for Coating UO2 Powders with Tungsten

    Science.gov (United States)

    Mireles, Omar R.; Tieman, Alyssa; Broadway, Jeramie; Hickman, Robert

    2013-01-01

    Demonstrated viability and utilization of: a) Fluidized powder bed. b) WCl6 CVD process. c) Coated spherical particles with tungsten. The highly corrosive nature of the WCl6 solid reagent limits material of construction. Indications that identifying optimized process variables with require substantial effort and will likely vary with changes in fuel requirements.

  6. Effect of mixture ratios and nitrogen carrier gas flow rates on the morphology of carbon nanotube structures grown by CVD

    CSIR Research Space (South Africa)

    Malgas, GF

    2008-02-01

    Full Text Available This paper reports on the growth of carbon nanotubes (CNTs) by thermal Chemical Vapour Deposition (CVD) and investigates the effects of nitrogen carrier gas flow rates and mixture ratios on the morphology of CNTs on a silicon substrate by vaporizing...

  7. Traffic-related air pollution exposure and incidence of stroke in four cohorts from Stockholm.

    Science.gov (United States)

    Korek, Michal J; Bellander, Tom D; Lind, Tomas; Bottai, Matteo; Eneroth, Kristina M; Caracciolo, Barbara; de Faire, Ulf H; Fratiglioni, Laura; Hilding, Agneta; Leander, Karin; Magnusson, Patrik K E; Pedersen, Nancy L; Östenson, Claes-Göran; Pershagen, Göran; Penell, Johanna C

    2015-01-01

    We investigated the risk of stroke related to long-term ambient air pollution exposure, in particular the role of various exposure time windows, using four cohorts from Stockholm County, Sweden. In total, 22,587 individuals were recruited from 1992 to 2004 and followed until 2011. Yearly air pollution levels resulting from local road traffic emissions were assessed at participant residences using dispersion models for particulate matter (PM10) and nitrogen oxides (NOX). Cohort-specific hazard ratios were estimated for time-weighted air pollution exposure during different time windows and the incidence of stroke, adjusted for common risk factors, and then meta-analysed. Overall, 868 subjects suffered a non-fatal or fatal stroke during 238,731 person-years of follow-up. An increment of 20 μg/m(3) in estimated annual mean of road-traffic related NOX exposure at recruitment was associated with a hazard ratio of 1.16 (95% CI 0.83-1.61), with evidence of heterogeneity between the cohorts. For PM10, an increment of 10 μg/m(3) corresponded to a hazard ratio of 1.14 (95% CI 0.68-1.90). Time-window analyses did not reveal any clear induction-latency pattern. In conclusion, we found suggestive evidence of an association between long-term exposure to NOX and PM10 from local traffic and stroke at comparatively low levels of air pollution.

  8. The use of predefined diet quality scores in the context of CVD risk during urbanization in the South African Prospective Urban and Rural Epidemiological (PURE) study

    NARCIS (Netherlands)

    Dolman, R.C.; Wentzel-Viljoen, E.; Jerling, J.C.; Feskens, E.J.M.; Kruger, A.; Pieters, M.

    2014-01-01

    Objective Urbanization is generally associated with increased CVD risk and accompanying dietary changes. Little is known regarding the association between increased CVD risk and dietary changes using approaches such as diet quality. The relevance of predefined diet quality scores (DQS) in

  9. Sensitive cardiac troponin T assay and the risk of incident cardiovascular disease in women with and without diabetes mellitus: the Women's Health Study.

    Science.gov (United States)

    Everett, Brendan M; Cook, Nancy R; Magnone, Maria C; Bobadilla, Maria; Kim, Eunjung; Rifai, Nader; Ridker, Paul M; Pradhan, Aruna D

    2011-06-21

    Very low levels of cardiac troponin T are associated with an increased risk of cardiovascular death in patients with stable chronic coronary disease. Whether high-sensitivity cardiac troponin T levels are associated with adverse cardiovascular outcomes in individuals without cardiovascular disease (CVD) has not been well studied. Using 2 complementary study designs, we evaluated the relationship between baseline cardiac troponin and incident CVD events among diabetic and nondiabetic participants in the Women's Health Study (median follow-up, 12.3 years). All diabetic women with blood specimens were included in a cohort study (n=512 diabetic women, n=65 events), and nondiabetic women were sampled for inclusion in a case-cohort analysis (n=564 comprising the subcohort, n=479 events). High-sensitivity cardiac troponin T was detectable (≥ 0.003 μg/L) in 45.5% of diabetic women and 30.3% of nondiabetic women (P<0.0001). In models adjusted for traditional risk factors and hemoglobin A(1c), detectable high-sensitivity cardiac troponin T was associated with subsequent CVD (myocardial infarction, stroke, cardiovascular death) in diabetic women (adjusted hazard ratio, 1.79; 95% confidence interval, 1.04 to 3.07, P=0.036) but not nondiabetic women (adjusted hazard ratio, 1.13; 95% confidence interval, 0.82 to 1.55; P=0.46). Further adjustment for amino-terminal pro-B-type natriuretic peptide and estimated renal function did not substantially alter this relationship among diabetic women (hazard ratio, 1.76; 95% confidence interval, 1.00 to 3.08; P=0.0499), which appeared to be driven by a 3-fold increase in CVD death that was not observed in nondiabetic women. Very low but detectable levels of cardiac troponin T are associated with total CVD and CVD death in women with diabetes mellitus. Among healthy nondiabetic women, detectable compared with undetectable troponin was not associated with CVD events.

  10. A Sensitive Cardiac Troponin T Assay and the Risk of Incident Cardiovascular Disease in Women with and without Diabetes: The Women’s Health Study

    Science.gov (United States)

    Everett, Brendan M.; Cook, Nancy R.; Magnone, Maria C.; Bobadilla, Maria; Kim, Eunjung; Rifai, Nader; Ridker, Paul M; Pradhan, Aruna D.

    2011-01-01

    Background Very low levels of cardiac troponin T associate with increased risk of cardiovascular death in patients with stable chronic coronary disease. Whether high-sensitivity cardiac troponin T (hsTnT) levels associate with adverse cardiovascular outcomes in individuals without cardiovascular disease (CVD) has not been well studied. Methods and Results Utilizing two complementary study designs, we evaluated the relationship between baseline cardiac troponin and incident CVD events among diabetic and non-diabetic participants in the Women’s Health Study (median follow-up 12.3 years). All diabetic women with blood specimens were included in a cohort study (n=512 diabetic women, n=65 events) and non-diabetic women were sampled for inclusion in a case-cohort analysis (n=564 comprising the subcohort, n=479 events). HsTnT was detectable (≥0.003 μg/L) in 45.5% of diabetic women and 30.3% of non-diabetic women (P<0.0001). In models adjusted for traditional risk factors and hemoglobin A1c, detectable hsTnT was associated with subsequent CVD (myocardial infarction, stroke, cardiovascular death) in diabetic women (adjusted HR 1.79, 95% CI 1.04-3.07, P=0.036), but not non-diabetic women (adjusted HR 1.13, 95% CI 0.82-1.55, P=0.46). Further adjustment for NT-proBNP and estimated renal function did not substantially alter this relationship among diabetic women (HR 1.76, 95% CI 1.00-3.08, P=0.0499), which appeared to be driven by a threefold increase in CVD death that was not observed in non-diabetic women. Conclusions Very low but detectable levels of cardiac troponin T associate with total CVD and CVD death in women with diabetes. Among healthy non-diabetic women, detectable compared to undetectable troponin was not associated with CVD events. PMID:21632491

  11. Effect of PbI2 deposition rate on two-step PVD/CVD all-vacuum prepared perovskite

    International Nuclear Information System (INIS)

    Ioakeimidis, Apostolos; Christodoulou, Christos; Lux-Steiner, Martha; Fostiropoulos, Konstantinos

    2016-01-01

    In this work we fabricate all-vacuum processed methyl ammonium lead halide perovskite by a sequence of physical vapour deposition of PbI 2 and chemical vapour deposition (CVD) of CH 3 NH 3 I under a static atmosphere. We demonstrate that for higher deposition rate the (001) planes of PbI 2 film show a higher degree of alignment parallel to the sample's surface. From X-ray diffraction data of the resulted perovskite film we derive that the intercalation rate of CH 3 NH 3 I is fostered for PbI 2 films with higher degree of (001) planes alignment. The stoichiometry of the produced perovskite film is also studied by Hard X-ray photoelectron spectroscopy measurements. Complete all-vacuum perovskite solar cells were fabricated on glass/ITO substrates coated by an ultra-thin (5 nm) Zn-phthalocyanine film as hole selective layer. A dependence of residual PbI 2 on the solar cells performance is displayed, while photovoltaic devices with efficiency up to η=11.6% were achieved. - Graphical abstract: A two-step PVD/CVD processed perovskite film with the CVD intercalation rate of CH 3 NCH 3 molecules been fostered by increasing the PVD rate of PbI 2 and prolonging the CVD time. - Highlights: • A simple PVD/CVD process for perovskite film production. • Increased PVD rate yields better alignment of the PbI 2 (001) crystallite planes. • CH 3 NH 3 I intercalation process fostered by increased PbI 2 PVD rate. • Stoichiometric CH 3 NH 3 PbI 3 suitable as absorber in photovoltaic applications • Reduced PbI 2 residue at the bottom of CH 3 NH 3 PbI 3 improves device performance.

  12. Road traffic noise, air pollution and incident cardiovascular disease: A joint analysis of the HUNT, EPIC-Oxford and UK Biobank cohorts.

    Science.gov (United States)

    Cai, Yutong; Hodgson, Susan; Blangiardo, Marta; Gulliver, John; Morley, David; Fecht, Daniela; Vienneau, Danielle; de Hoogh, Kees; Key, Tim; Hveem, Kristian; Elliott, Paul; Hansell, Anna L

    2018-03-05

    This study aimed to investigate the effects of long-term exposure to road traffic noise and air pollution on incident cardiovascular disease (CVD) in three large cohorts: HUNT, EPIC-Oxford and UK Biobank. In pooled complete-case sample of the three cohorts from Norway and the United Kingdom (N = 355,732), 21,081 incident all CVD cases including 5259 ischemic heart disease (IHD) and 2871 cerebrovascular cases were ascertained between baseline (1993-2010) and end of follow-up (2008-2013) through medical record linkage. Annual mean 24-hour weighted road traffic noise (Lden) and air pollution (particulate matter with aerodynamic diameter ≤ 10 μm [PM10], ≤2.5 μm [PM2.5] and nitrogen dioxide [NO2]) exposure at baseline address was modelled using a simplified version of the Common Noise Assessment Methods in Europe (CNOSSOS-EU) and European-wide Land Use Regression models. Individual-level covariate data were harmonised and physically pooled across the three cohorts. Analysis was via Cox proportional hazard model with mutual adjustments for both noise and air pollution and potential confounders. No significant associations were found between annual mean Lden and incident CVD, IHD or cerebrovascular disease in the overall population except that the association with incident IHD was significant among current-smokers. In the fully adjusted models including adjustment for Lden, an interquartile range (IQR) higher PM10 (4.1 μg/m3) or PM2.5 (1.4 μg/m3) was associated with a 5.8% (95%CI: 2.5%-9.3%) and 3.7% (95%CI: 0.2%-7.4%) higher risk for all incident CVD respectively. No significant associations were found between NO2 and any of the CVD outcomes. We found suggestive evidence of a possible association between road traffic noise and incident IHD, consistent with current literature. Long-term particulate air pollution exposure, even at concentrations below current European air quality standards, was significantly associated with incident CVD. Copyright

  13. Critical incident stress management.

    Science.gov (United States)

    Lim, J J; Childs, J; Gonsalves, K

    2000-10-01

    Recent studies have indicated implementation of the CISM Program has impacted and reduced the cost of workers' compensation claims for stress related conditions and the number of lost work days (Ott, 1997; Western Management Consultants, 1996). Occupational health professionals need to be ready to develop and implement a comprehensive critical incident stress management process in anticipation of a major event. The ability to organize, lead, or administer critical incident stress debriefings for affected employees is a key role for the occupational health professional. Familiarity with these concepts and the ability to identify a critical incident enhances value to the business by mitigating the stress and impact to the workplace. Critical Incident Stress Management Systems have the potential for decreasing stress and restoring employees to normal life function--a win/win situation for both the employees and the organization.

  14. Marine Animal Incident Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Large whale stranding, death, ship strike and entanglement incidents are all recorded to monitor the health of each population and track anthropogenic factors that...

  15. Police Incident Blotter (Archive)

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — The Police Blotter Archive contains crime incident data after it has been validated and processed to meet Uniform Crime Reporting (UCR) standards, published on a...

  16. Prediction of Safety Incidents

    Data.gov (United States)

    National Aeronautics and Space Administration — Safety incidents, including injuries, property damage and mission failures, cost NASA and contractors thousands of dollars in direct and indirect costs. This project...

  17. 2011 Japanese Nuclear Incident

    Science.gov (United States)

    EPA’s RadNet system monitored the environmental radiation levels in the United States and parts of the Pacific following the Japanese Nuclear Incident. Learn about EPA’s response and view historical laboratory data and news releases.

  18. Information Security Incident Management

    Directory of Open Access Journals (Sweden)

    D. I. Persanov

    2010-03-01

    Full Text Available The present report highlights the points of information security incident management in an enterprise. Some aspects of the incident and event classification are given. The author presents his view of the process scheme over the monitoring and processing information security events. Also, the report determines a few critical points of the listed process and gives the practical recommendations over its development and optimization.

  19. CVD-MPFA full pressure support, coupled unstructured discrete fracture-matrix Darcy-flux approximations

    Science.gov (United States)

    Ahmed, Raheel; Edwards, Michael G.; Lamine, Sadok; Huisman, Bastiaan A. H.; Pal, Mayur

    2017-11-01

    Two novel control-volume methods are presented for flow in fractured media, and involve coupling the control-volume distributed multi-point flux approximation (CVD-MPFA) constructed with full pressure support (FPS), to two types of discrete fracture-matrix approximation for simulation on unstructured grids; (i) involving hybrid grids and (ii) a lower dimensional fracture model. Flow is governed by Darcy's law together with mass conservation both in the matrix and the fractures, where large discontinuities in permeability tensors can occur. Finite-volume FPS schemes are more robust than the earlier CVD-MPFA triangular pressure support (TPS) schemes for problems involving highly anisotropic homogeneous and heterogeneous full-tensor permeability fields. We use a cell-centred hybrid-grid method, where fractures are modelled by lower-dimensional interfaces between matrix cells in the physical mesh but expanded to equi-dimensional cells in the computational domain. We present a simple procedure to form a consistent hybrid-grid locally for a dual-cell. We also propose a novel hybrid-grid for intersecting fractures, for the FPS method, which reduces the condition number of the global linear system and leads to larger time steps for tracer transport. The transport equation for tracer flow is coupled with the pressure equation and provides flow parameter assessment of the fracture models. Transport results obtained via TPS and FPS hybrid-grid formulations are compared with the corresponding results of fine-scale explicit equi-dimensional formulations. The results show that the hybrid-grid FPS method applies to general full-tensor fields and provides improved robust approximations compared to the hybrid-grid TPS method for fractured domains, for both weakly anisotropic permeability fields and very strong anisotropic full-tensor permeability fields where the TPS scheme exhibits spurious oscillations. The hybrid-grid FPS formulation is extended to compressible flow and the

  20. Optimization of a Wcl6 CVD System to Coat UO2 Powder with Tungsten

    Science.gov (United States)

    Belancik, Grace A.; Barnes, Marvin W.; Mireles, Omar; Hickman, Robert

    2015-01-01

    In order to achieve deep space exploration via Nuclear Thermal Propulsion (NTP), Marshall Space Flight Center (MSFC) is developing W-UO2 CERMET fuel elements, with focus on fabrication, testing, and process optimization. A risk of fuel loss is present due to the CTE mismatch between tungsten and UO2 in the W-60vol%UO2 fuel element, leading to high thermal stresses. This fuel loss can be reduced by coating the spherical UO2 particles with tungsten via H2/WCl6 reduction in a fluidized bed CVD system. Since the latest incarnation of the inverted reactor was completed, various minor modifications to the system design were completed, including an inverted frit sublimer. In order to optimize the parameters to achieve the desired tungsten coating thickness, a number of trials using surrogate HfO2 powder were performed. The furnace temperature was varied between 930 C and 1000degC, and the sublimer temperature was varied between 140 C and 200 C. Each trial lasted 73-82 minutes, with one lasting 205 minutes. A total of 13 trials were performed over the course of three months, two of which were re-coatings of previous trials. The powder samples were weighed before and after coating to roughly determine mass gain, and Scanning Electron Microscope (SEM) data was also obtained. Initial mass results indicated that the rate of layer deposition was lower than desired in all of the trials. SEM confirmed that while a uniform coating was obtained, the average coating thickness was 9.1% of the goal. The two re-coating trials did increase the thickness of the tungsten layer, but only to an average 14.3% of the goal. Therefore, the number of CVD runs required to fully coat one batch of material with the current configuration is not feasible for high production rates. Therefore, the system will be modified to operate with a negative pressure environment. This will allow for better gas mixing and more efficient heating of the substrate material, yielding greater tungsten coating per trial.

  1. Synthesis and characterization of hafnium carbide microcrystal chains with a carbon-rich shell via CVD

    International Nuclear Information System (INIS)

    Tian, Song; Li, Hejun; Zhang, Yulei; Liu, Sen; Fu, Yangxi; Li, Yixian; Qiang, Xinfa

    2013-01-01

    Graphical abstract: Novel HfC microcrystal chains have been synthesized via a catalyst-assisted chemical vapor deposition process. SEM results show the chains have a periodically changing diameter and a nanoscale sharpening tip. Analysis of TEM/SAED/EELS/EDX data shows the single-crystal chains grow along a [0 0 1] direction and consist of a HfC core and a thin carbon-rich shell with embedded HfC nanocrystallites surrounding the core. This work achieves the controllable preparation of nanoscale HfC sharpening tips for application as a point electron emission source and facilitates the application of HfC ultrafast laser-triggered tips in attosecond science. Highlights: •HfC microcrystal chains were synthesized by a catalyst-assisted CVD. •The chains grow along a [0 0 1] direction and have a periodically changing diameter. •Single-crystal HfC core is sheathed by a thin carbon-rich shell. •A growth mechanism model is proposed to explain the growth of microcrystal chians. •This work achieves the controllable preparation of nanoscale HfC sharpening tips. -- Abstract: Novel hafnium carbide (HfC) microcrystal chains, with a periodically changing diameter and a nanoscale sharpening tip at the chain end, have been synthesized via a catalyst-assisted chemical vapor deposition (CVD) process. The as-synthesized chains with many octahedral microcrystals have diameters of between several hundreds of nm and 6 μm and lengths of ∼500 μm. TEM diffraction studies show that the chains are single-crystalline HfC and preferentially grow along a [0 0 1] crystal orientation. TEM/EELS/EDX analysis proves the chains are composed of a HfC core and a thin (several tens of nm to 100 nm) carbon-rich shell with the embedded HfC nanocrystallites (typically below 10 nm) surrounding the core. The growth mechanism model for the chains based on the vapor–liquid–solid process, the vapor–solid process, and the HfC crystal growth characteristics is discussed

  2. Efecto del argon en películas CNxHy depositadas mediante ECR-CVD

    Directory of Open Access Journals (Sweden)

    Albella, J. M.

    2004-04-01

    Full Text Available Carbon nitride films have been deposited by ECR-CVD, from Ar/CH4/N2 gas mixtures with different methane concentrations. Infrared Spectroscopy (IRS and Elastic Recoil Detection Analysis (ERDA have been used for films characterisation and Optical Emission Spectroscopy (OES for plasma analysis. Argon concentration in the gas mixture controls the growth rate as well as the composition of the film. In the proposed model, argon plays a key role in the activation of methane molecules. Also, during the growth of the film, two processes may be considered: i Film formation and ii Etching of the growing surface. Changing the gas mixture composition affects both processes, which results in films with different composition and structure as well as different deposition rates.Se ha estudiado el efecto del argon durante el proceso de CVD asistido por un plasma ECR para la síntesis de películas de nitruro de carbono (CNxHy a partir de mezclas gaseosas Ar/CH4/N2 con diferente contenido de metano. Las películas depositadas han sido analizadas mediante espectroscopía infrarroja (IRS y ERDA (Elastic Recoil Detection Analysis, y el análisis del plasma ha sido realizado utilizando la técnica de espectroscopía de emisión óptica (OES. La velocidad de deposición y la composición de las películas depositadas se encuentran determinadas por la concentración de argon en la mezcla gaseosa. Se propone un modelo, según el cual el argon juega un papel fundamental como activador de las moléculas de metano. El modelo propuesto incluye dos procesos simultáneos durante el crecimiento de las capas : i formación de la capa y ii ataque de la superficie de crecimiento. Según la composición de la mezcla gaseosa se favorece uno u otro proceso, lo que conduce a velocidades de deposición diferentes así como a depósitos con diferente composición y estructura atómica.

  3. Exploring the path of Mediterranean diet on 10-year incidence of cardiovascular disease: the ATTICA study (2002-2012).

    Science.gov (United States)

    Panagiotakos, D B; Georgousopoulou, E N; Pitsavos, C; Chrysohoou, C; Skoumas, I; Pitaraki, E; Georgiopoulos, G A; Ntertimani, M; Christou, A; Stefanadis, C

    2015-03-01

    A Mediterranean diet has been associated with lower all-cause and cardiovascular disease (CVD) morbidity and mortality, but the clinical and behavioral pathway has not been well understood and appreciated. The aim of this work was to explore the path between adherence to a Mediterranean-type diet, lifestyle behaviors, clinical status, and a 10-year incidence of CVD. The ATTICA study was carried out in the Athens area during 2001-2002 and included 3042 participants free of CVD at baseline (49.8% men, aged 18-89). Adherence to a Mediterranean diet was assessed using the MedDietScore (range 0-55). During 2011-2012, 2583 out of the 3042 participants were found during the 10-year follow-up (15% lost to follow-up). Adherence to a Mediterranean diet decreased CVD risk (relative Risk (RR) per 1/55 unit = 0.96, 95% confidence interval (CI): 0.93, 1.00), independently of various sociodemographic, lifestyle, and clinical factors. Subgroup analyses revealed that participants with an unhealthy lifestyle (i.e., smokers, and obese and sedentary persons) remained protected from CVD through a greater adherence to a Mediterranean diet (RR for smokers = 0.92, 95%CI: 0.88, 0.97; RR for obese participants = 0.90, 95%CI: 0.82, 0.979; and RR for sedentary participants = 0.95, 95%CI: 0.90, 0.99). Path analysis revealed that adherence to a Mediterranean diet not only decreases the levels of C-reactive protein and interleukin-6 but also has an independent protective role against CVD risk per se (total effect of the MedDietScore on CVD = -0.003, 95%CI: -0.005 to 0.000). Adherence to a Mediterranean diet confers a considerable reduction on CVD risk, independent of various factors. Therefore, even subjects with unhealthy lifestyle behaviors may benefit from adherence to this diet, suggesting another dimension to prevention strategies. Copyright © 2014 Elsevier B.V. All rights reserved.

  4. Risk factors and their combined effects on the incidence rate of subarachnoid hemorrhage--a population-based cohort study.

    Directory of Open Access Journals (Sweden)

    Miikka Korja

    Full Text Available BACKGROUND: Prospective studies on the risk factors for subarachnoid hemorrhage (SAH are limited. Moreover, the effect of risk factors on the incidence rates of SAH is not well known about. AIMS: In this study, we aimed to identify risk factors for SAH and characterize subgroups in a population with a high incidence of SAH. METHODS: After recording multiple potential risk factors for SAH at the time of enrollment, first ever SAH events between 1972 and 2009 were recorded through the nationwide Causes of Death Register and Hospital Discharge Register for the population-based cohort of 64 349 participants, who participated in the National FINRISK Study between 1972 and 2007 in Finland. RESULTS: During the follow-up time of 1.26 million person-years (median 17.9 years, range 0 to 37.9 years, 437 persons experienced fatal or non-fatal SAH. Crude SAH incidence was 34.8 (95% confidence interval: 31.7-38.2 per 100 000 person-years among ≥ 25-year-old persons. Female sex, high blood pressure values and current smoking were confirmed as risk factors for SAH. Previous myocardial infarction, history of premature stroke (any kind in mother and elevated cholesterol levels in men were identified as new risk factors for SAH. Depending on the combination of risk factors, SAH incidence varied between 8 and 171 per 100 000 person-years. CONCLUSIONS: New and previously reported risk factors appear to have a much stronger association with the incidence of SAH than is ordinarily seen in cardiovascular diseases. Risk factor assessments may facilitate the identification of high-risk persons who should be the focus of preventive interventions.

  5. Risk Factors and Their Combined Effects on the Incidence Rate of Subarachnoid Hemorrhage – A Population-Based Cohort Study

    Science.gov (United States)

    Korja, Miikka; Silventoinen, Karri; Laatikainen, Tiina; Jousilahti, Pekka; Salomaa, Veikko; Hernesniemi, Juha; Kaprio, Jaakko

    2013-01-01

    Background Prospective studies on the risk factors for subarachnoid hemorrhage (SAH) are limited. Moreover, the effect of risk factors on the incidence rates of SAH is not well known about. Aims In this study, we aimed to identify risk factors for SAH and characterize subgroups in a population with a high incidence of SAH. Methods After recording multiple potential risk factors for SAH at the time of enrolment, first ever SAH events between 1972 and 2009 were recorded through the nationwide Causes of Death Register and Hospital Discharge Register for the population-based cohort of 64 349 participants, who participated in the National FINRISK Study between 1972 and 2007 in Finland. Results During the follow-up time of 1.26 million person-years (median 17.9 years, range 0 to 37.9 years), 437 persons experienced fatal or non-fatal SAH. Crude SAH incidence was 34.8 (95% confidence interval: 31.7–38.2) per 100 000 person-years among ≥25-year-old persons. Female sex, high blood pressure values and current smoking were confirmed as risk factors for SAH. Previous myocardial infarction, history of premature stroke (any kind) in mother and elevated cholesterol levels in men were identified as new risk factors for SAH. Depending on the combination of risk factors, SAH incidence varied between 8 and 171 per 100 000 person-years. Conclusions New and previously reported risk factors appear to have a much stronger association with the incidence of SAH than is ordinarily seen in cardiovascular diseases. Risk factor assessments may facilitate the identification of high-risk persons who should be the focus of preventive interventions. PMID:24040058

  6. Electrocatalysts with platinum, cobalt and nickel preparations by mechanical alloyed and CVD for the reaction of oxygen reduction; Electrocatalizadores a base de platino, cobalto y niquel preparados por aleado mecanico y CVD para la reaccion de reduccion de oxigeno

    Energy Technology Data Exchange (ETDEWEB)

    Garcia C, M. A. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)

    2008-07-01

    In this research, the molecular oxygen reduction reaction (ORR) was investigated on electrocatalysts of Co, Ni, Pt and their alloys CoNi, PtCo, PtNi and PtCoNi by using H{sub 2}SO{sub 4} 0.5 and KOH 0.5 M solutions as electrolytes. The electrocatalysts were synthesized by Mechanical Alloying (MA) and Chemical Vapor Deposition (CVD) processes. For MA, metallic powders were processed during 20 h of milling in a high energy SPEX 8000 mill. For CVD, a hot-wall reactor was utilized and Co, Ni and Pt acetilactetonates were used as precursors. Films were deposited at a total pressure of 1 torr and temperatures of 400-450 C. Electrocatalysts were characterized by X-Ray Diffraction (XRD). Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Energy Dispersive X-Ray Spectroscopy (EDS). Electrocatalysts prepared by mechanical alloying showed a homogeneously dispersed agglomeration of particles with nano metric size. Electrocatalysts obtained by CVD showed, in some cases, non uniform films, with particles of nano metric size, as well. The electrocatalytic performance was evaluated by using the Rotating Disk Electrode technique (RDE). Electrocatalysts prepared by MA showed higher activity than those obtained by CVD. All electrocatalysts were evaluated in alkaline media. Only electrocatalysts containing Pt were evaluated in acid media, because those materials with Co, Ni and their alloys showed instability in acidic media. Most electrocatalysts followed a mechanism for the ORR producing a certain proportion of H{sub 2}O{sub 2}. All electrocatalysts, exhibited a fair or good electrocatalytic activity in comparison with other similar reported materials. It was found that MA and CVD are appropriate processes to prepare electrocatalysts for the ORR with particles of nano metric size and performing with an acceptable catalytic activity. PtCoNi 70-23-7% by MA and PtCoNi-CVD electrocatalysts showed the highest activity in alkaline media, while in acidic

  7. Incidence, pattern and outcome of cardiovascular admissions at the ...

    African Journals Online (AJOL)

    CVD) in Aba -a cosmopolitan town undergoing increased urbanization in the last decade. The study involved 756 case notes of patients with records of CVD between January 2008 and December 2012. Information extracted from each case note ...

  8. Fish consumption and its motives in households with versus without self-reported medical history of CVD: A consumer survey from five European countries

    Directory of Open Access Journals (Sweden)

    Brunsø Karen

    2008-09-01

    Full Text Available Abstract Background The purpose of this study was to explore the cross-cultural differences in the frequency of fish intake and in motivations for fish consumption between people from households with (CVD+ or without (CVD- medical history of cardiovascular disease, using data obtained in five European countries. Methods A cross-sectional consumer survey was carried out in November-December 2004 with representative household samples from Belgium, the Netherlands, Denmark, Poland and Spain. The sample consisted of 4,786 respondents, aged 18–84 and who were responsible for food purchasing and cooking in the household. Results Individuals from households in the CVD+ group consumed fish more frequently in Belgium and in Denmark as compared to those in the CVD- group. The consumption of fatty fish, which is the main sources of omega-3 PUFA associated with prevention of cardiovascular diseases, was on the same level for the two CVD groups in the majority of the countries, except in Belgium where CVD+ subjects reported to eat fatty fish significantly more frequently than CVD- subjects. All respondents perceived fish as a very healthy and nutritious food product. Only Danish consumers reported a higher subjective and objective knowledge related to nutrition issues about fish. In the other countries, objective knowledge about fish was on a low level, similar for CVD+ as for CVD- subjects, despite a higher claimed use of medical information sources about fish among CVD+ subjects. Conclusion Although a number of differences between CVD- and CVD+ subjects with respect to their frequency of fish intake are uncovered, the findings suggest that fish consumption traditions and habits – rather than a medical history of CVD – account for large differences between the countries, particularly in fatty fish consumption. This study exemplifies the need for nutrition education and more effective communication about fish, not only to the people facing chronic

  9. Higher plasma soluble Receptor for Advanced Glycation End Products (sRAGE) levels are associated with incident cardiovascular disease and all-cause mortality in type 1 diabetes: a 12-year follow-up study

    DEFF Research Database (Denmark)

    Nin, Johanna W M; Jorsal, Anders; Merces Ferreira, Isabel Maria

    2010-01-01

    To investigate the associations of plasma levels of soluble receptor for advanced glycation end products (sRAGE) with incident cardiovascular disease (CVD) and all-cause mortality in type 1 diabetes and the extent to which any such associations could be explained by endothelial and renal dysfunct...

  10. Deposition uniformity, particle nucleation and the optimum conditions for CVD in multi-wafer furnaces

    Energy Technology Data Exchange (ETDEWEB)

    Griffiths, S.K.; Nilson, R.H.

    1996-06-01

    A second-order perturbation solution describing the radial transport of a reactive species and concurrent deposition on wafer surfaces is derived for use in optimizing CVD process conditions. The result is applicable to a variety of deposition reactions and accounts for both diffusive and advective transport, as well as both ordinary and Knudsen diffusion. Based on the first-order approximation, the deposition rate is maximized subject to a constraint on the radial uniformity of the deposition rate. For a fixed reactant mole fraction, the optimum pressure and optimum temperature are obtained using the method of Lagrange multipliers. This yields a weak one-sided maximum; deposition rates fall as pressures are reduced but remain nearly constant at all pressures above the optimum value. The deposition rate is also maximized subject to dual constraints on the uniformity and particle nucleation rate. In this case, the optimum pressure, optimum temperature and optimum reactant fraction are similarly obtained, and the resulting maximum deposition rate is well defined. These results are also applicable to CVI processes used in composites manufacturing.

  11. Growth of high quality AlN films on CVD diamond by RF reactive magnetron sputtering

    Science.gov (United States)

    Chen, Liang-xian; Liu, Hao; Liu, Sheng; Li, Cheng-ming; Wang, Yi-chao; An, Kang; Hua, Chen-yi; Liu, Jin-long; Wei, Jun-jun; Hei, Li-fu; Lv, Fan-xiu

    2018-02-01

    A highly oriented AlN layer has been successfully grown along the c-axis on a polycrystalline chemical vapor deposited (CVD) diamond by RF reactive magnetron sputtering. Structural, morphological and mechanical properties of the heterostructure were investigated by Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Transmission Electron Microscopy (TEM), X-ray diffraction (XRD), Nano-indentation and Four-probe meter. A compact AlN film was demonstrated on the diamond layer, showing columnar grains and a low surface roughness of 1.4 nm. TEM results revealed a sharp AlN/diamond interface, which was characterized by the presence of a distinct 10 nm thick buffer layer resulting from the initial AlN growth stage. The FWHM of AlN (002) diffraction peak and its rocking curve are as low as 0.41° and 3.35° respectively, indicating a highly preferred orientation along the c-axis. AlN sputtered films deposited on glass substrates show a higher bulk resistivity (up to 3 × 1012 Ω cm), compared to AlN films deposited on diamond (∼1010 Ω cm). Finally, the film hardness and Young's modulus of AlN films on diamond are 25.8 GPa and 489.5 GPa, respectively.

  12. New CVD-based method for the growth of high-quality crystalline zinc oxide layers

    Science.gov (United States)

    Huber, Florian; Madel, Manfred; Reiser, Anton; Bauer, Sebastian; Thonke, Klaus

    2016-07-01

    High-quality zinc oxide (ZnO) layers were grown using a new chemical vapour deposition (CVD)-based low-cost growth method. The process is characterized by total simplicity, high growth rates, and cheap, less hazardous precursors. To produce elementary zinc vapour, methane (CH4) is used to reduce a ZnO powder. By re-oxidizing the zinc with pure oxygen, highly crystalline ZnO layers were grown on gallium nitride (GaN) layers and on sapphire substrates with an aluminum nitride (AlN) nucleation layer. Using simple CH4 as precursor has the big advantage of good controllability and the avoidance of highly toxic gases like nitrogen oxides. In photoluminescence (PL) measurements the samples show a strong near-band-edge emission and a sharp line width at 5 K. The good crystal quality has been confirmed in high resolution X-ray diffraction (HRXRD) measurements. This new growth method has great potential for industrial large-scale production of high-quality single crystal ZnO layers.

  13. [Application of Raman spectroscopy to investigation of CVD-SIC fiber].

    Science.gov (United States)

    Liu, Bin; Yang, Yan-Qing; Luo, Xian; Huang, Bin

    2011-11-01

    The CVD-SiC fiber was studied by using laser Raman spectra. It was found that the sharp TO peak exists in the first SiC deposit layer, indicating the larger SiC grains. But the second SiC deposit layer is with small grains. Raman peak of carbon and silicon was detected respectively in the first and second layer. Compared with that of the single SiC fiber, the TO peaks move to the high wave number for the SiC fiber in SiC(f)/Ti-6Al-4V composite. It indicates that the compressive thermal residual stress is present in the SiC fiber during the fabrication of the composite because of the mismatched coefficient of thermal expansion between Ti-6Al-4V matrix and SiC fiber. The average thermal residual stress of the SiC fiber in SiC(f)/Ti-6Al-4V composite was calculated to be 318 MPa and the residual stress in first deposit layer is 436 MPa which is much higher than that in the second layer.

  14. Successful comeback of the single-dose live oral cholera vaccine CVD 103-HgR.

    Science.gov (United States)

    Herzog, Christian

    2016-01-01

    Effective and easy to administer cholera vaccines are in need more than ever, for at risk populations and travellers alike. In many parts of the world cholera is still endemic, causing outbreaks and constituting repeatedly serious public health problems. The oral live cholera vaccine CVD 103-HgR (Orochol, Mutachol), the first genetically modified organism (GMO) used as vaccine, was in its time (launched 1993, Switzerland) the ideal cholera vaccine: single-dose, protective efficacy of 80-100% against moderate to severe cholera, acting within 8 days and exhibiting excellent safety, indiscernible from placebo. However, there were strong headwinds: In the 1990s the indication for cholera vaccines was generally downplayed by experts and in 1997 the European Commission called for a moratorium of GMOs which blocked the registration in the European Union. Thus, demand for this vaccine remained low and in 2003 it was taken off the market for economic reasons. After a decade in obscurity it (Vaxchora) has resurfaced again, now produced in the U.S. and equipped with a U.S. FDA license (June 10, 2016). What had happened? This commentary gives a critical account of an almost unbelievable string of misadventures, emerging adverse circumstances and man-made failures which nearly killed this single-dose live oral cholera vaccine. The good news is that patience and persistence lead to success in the end, allowing good science to prevail for the benefit of those in need. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Luminescence and conductivity studies on CVD diamond exposed to UV light

    CERN Document Server

    Bizzarri, A; Bruzzi, M; Sciortino, S

    1999-01-01

    The photoluminescence (PL), thermoluminescence (TL) and thermally stimulated currents (TSC) of four high-quality CVD diamond films have been investigated in the range of temperatures between 300 and 700 K. The sample excitation has been carried out by means of an UV xenon lamp and UV laser lines. The features of the signals have been found equal to those obtained from particle excitation. The TL analysis shows the existence of several deep traps with activation energies between 0.6 and 1.0 eV. The contribution to the TL signal from different traps has been singled out by means of successive annealing processes. The TL results are in good agreement with those obtained from TSC measurements. The combined use of the two techniques allows a precise determination of the trap parameters. The spectral content of the TL response has also been compared with the PL signal in order to investigate the recombination process. This analysis shows that, in this temperature range, the TL signal is likely due to recombination ...

  16. Optical Properties Of As-Deposited Amorphous Carbon Film Fromvarious Substrate Temperaturesvia Custom-Made-CVD

    Directory of Open Access Journals (Sweden)

    A. Ishak

    2015-01-01

    Full Text Available Abstract We were deposited the as-deposited amorphous carbon via a modified custom-made-CVD in the range of 350oC to 550oC at atmospheric pressure with constant of negative bias -40V and argon gas for 1 hour deposition. We used vaporized of palm oil as a carbon source into the chamber. It was observed above 90 of light were transmitted to the samples instead of sample 500oC 80. The as-deposited thin film grown on glass and p-type silicon we found uniform smooth dark grey colored and thickness in the range of 155 to 190nm. It was found thickness less than 170nm brought less significant impact to the reduction of transmission percentage. In relationship with structural image in FESEM the absorption coefficient was found high as the size of particles were big rough and agglomerated. The result showed the optical band gaps for 550oC to 350oC were 0.5eV 1.3eV 0.1eV 0.7eV and 1.4eV respectively. The optical band gaps of 400oC and 350oC were suitable for solar cell applications.

  17. Impedance study on the corrosion of PVD and CVD titanium nitride coatings

    International Nuclear Information System (INIS)

    Elsener, B.; Rota, A.; Boehni, H.

    1989-01-01

    Titanium nitride (TiN) coatings, produced by physical (PVD) or chemical (CVD) vapor deposition techniques are used routinely to improve the wear and corrosion resistance of a surface. The main problem in using TiN as a protective coating in aggressive environements are pores and pinholes in the coating where the substrate is exposed to the electrolyte. In this work, the electrochemical and corrosion behaviour of TiN films on quartz glass, carbon steel, 304 and 316 stainless steel is studied by polarization curves and electrochemical impedance spectroscopy (EIS) in hydrochloric acid. It is shown that the TiN coating can be used successfully only on substrates that passivate easily. On mild steel rapid corrosion takes place at pores in the coating due to the very noble steady state potential of the TiN coating. The interaction of the metallic substrate with the TiN coating is discussed for the two limiting cases mild steel (active) and 316SS (passive). It is shown that the determination of the coating porosity is possible for the active substrate only. On the passive substrate the occurence of an additional time constant in the high frequency region of the spectrum qualitatively indicates the presence of pores. A quality control of the coatings based on this fact might be possible. (author) 15 refs., 6 figs., 2 tabs

  18. Low-pressure c-BN deposition - is a CVD process possible?

    International Nuclear Information System (INIS)

    Haubner, R.; Tang, X.

    2001-01-01

    Since the low-pressure diamond deposition was discovered in 1982 there is a high interest to find a similar process for the c-BN synthesis. A review about the c-BN deposition process as well as its characterization is given. Experiments with a simple chemical vapor deposition(CVD) reactor using tris(dimethylamino)borane as precursor were carried out. In a cold-wall reactor substrates were heated up by high-frequency. Argon was used as protecting and carrying the precursor, it was saturated with tris(dimethylamino)borane (precursor) according to its vapor pressure and transports the pressure to the hot substrate, where deposition occurs. WC-Co hardmetal plates containing 6 wt. % Co, Mo and Si were used as substrates. Various BN layers were deposited and characterized. X-ray diffraction, IR-spectroscopy and SIMS indicate that BN-coatings containing c-BN were deposited. However a final verification of c-BN crystallites by TEM investigations was not possible till now. (nevyjel)

  19. CVD grown 2D MoS2 layers: A photoluminescence and fluorescence lifetime imaging study

    International Nuclear Information System (INIS)

    Oezden, Ayberk; Madenoglu, Buesra; Sar, Hueseyin; Ay, Feridun; Perkgoez, Nihan Kosku; Yeltik, Aydan; Sevik, Cem

    2016-01-01

    In this letter, we report on the fluorescence lifetime imaging and accompanying photoluminescence properties of a chemical vapour deposition (CVD) grown atomically thin material, MoS 2 . μ-Raman, μ-photoluminescence (PL) and fluorescence lifetime imaging microscopy (FLIM) are utilized to probe the fluorescence lifetime and photoluminescence properties of individual flakes of MoS 2 films. Usage of these three techniques allows identification of the grown layers, grain boundaries, structural defects and their relative effects on the PL and fluorescence lifetime spectra. Our investigation on individual monolayer flakes reveals a clear increase of the fluorescence lifetime from 0.3 ns to 0.45 ns at the edges with respect to interior region. On the other hand, investigation of the film layer reveals quenching of PL intensity and lifetime at the grain boundaries. These results could be important for applications where the activity of edges is important such as in photocatalytic water splitting. Finally, it has been demonstrated that PL mapping and FLIM are viable techniques for the investigation of the grain-boundaries. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. Multiscale Modeling of Chemical Vapor Deposition (CVD Apparatus: Simulations and Approximations

    Directory of Open Access Journals (Sweden)

    Juergen Geiser

    2013-02-01

    Full Text Available We are motivated to compute delicate chemical vapor deposition (CVD processes. Such processes are used to deposit thin films of metallic or ceramic materials, such as SiC or a mixture of SiC and TiC. For practical simulations and for studying the characteristics in the deposition area, we have to deal with delicate multiscale models. We propose a multiscale model based on two different software packages. The large scales are simulated with computational fluid dynamics (CFD software based on the transportreaction model (or macroscopic model, and the small scales are simulated with ordinary differential equations (ODE software based on the reactive precursor gas model (or microscopic model. Our contribution is to upscale the correlation of the underlying microscale species to the macroscopic model and reformulate the fast reaction model. We obtain a computable model and apply a standard CFD software code without losing the information of the fast processes. For the multiscale model, we present numerical results of a real-life deposition process.