Strategy for continuous improvement in IC manufacturability, yield, and reliability

Science.gov (United States)

Dreier, Dean J.; Berry, Mark; Schani, Phil; Phillips, Michael; Steinberg, Joe; DePinto, Gary

1993-01-01

Continual improvements in yield, reliability and manufacturability measure a fab and ultimately result in Total Customer Satisfaction. A new organizational and technical methodology for continuous defect reduction has been established in a formal feedback loop, which relies on yield and reliability, failed bit map analysis, analytical tools, inline monitoring, cross functional teams and a defect engineering group. The strategy requires the fastest detection, identification and implementation of possible corrective actions. Feedback cycle time is minimized at all points to improve yield and reliability and reduce costs, essential for competitiveness in the memory business. Payoff was a 9.4X reduction in defectivity and a 6.2X improvement in reliability of 256 K fast SRAMs over 20 months.

Nominal Mass?

Science.gov (United States)

Attygalle, Athula B; Pavlov, Julius

2017-08-01

The current IUPAC-recommended definition of the term "nominal mass," based on the most abundant naturally occurring stable isotope of an element, is flawed. We propose that Nominal mass should be defined as the sum of integer masses of protons and neutrons in any chemical species. In this way, all isotopes and isotopologues can be assigned a definitive identifier. Graphical Abstract ᅟ.

MOV reliability evaluation and periodic verification scheduling

Energy Technology Data Exchange (ETDEWEB)

Bunte, B.D.

1996-12-01

The purpose of this paper is to establish a periodic verification testing schedule based on the expected long term reliability of gate or globe motor operated valves (MOVs). The methodology in this position paper determines the nominal (best estimate) design margin for any MOV based on the best available information pertaining to the MOVs design requirements, design parameters, existing hardware design, and present setup. The uncertainty in this margin is then determined using statistical means. By comparing the nominal margin to the uncertainty, the reliability of the MOV is estimated. The methodology is appropriate for evaluating the reliability of MOVs in the GL 89-10 program. It may be used following periodic testing to evaluate and trend MOV performance and reliability. It may also be used to evaluate the impact of proposed modifications and maintenance activities such as packing adjustments. In addition, it may be used to assess the impact of new information of a generic nature which impacts safety related MOVs.

MOV reliability evaluation and periodic verification scheduling

International Nuclear Information System (INIS)

Bunte, B.D.

1996-01-01

The purpose of this paper is to establish a periodic verification testing schedule based on the expected long term reliability of gate or globe motor operated valves (MOVs). The methodology in this position paper determines the nominal (best estimate) design margin for any MOV based on the best available information pertaining to the MOVs design requirements, design parameters, existing hardware design, and present setup. The uncertainty in this margin is then determined using statistical means. By comparing the nominal margin to the uncertainty, the reliability of the MOV is estimated. The methodology is appropriate for evaluating the reliability of MOVs in the GL 89-10 program. It may be used following periodic testing to evaluate and trend MOV performance and reliability. It may also be used to evaluate the impact of proposed modifications and maintenance activities such as packing adjustments. In addition, it may be used to assess the impact of new information of a generic nature which impacts safety related MOVs

On Improving Reliability of SRAM-Based Physically Unclonable Functions

Directory of Open Access Journals (Sweden)

Arunkumar Vijayakumar

2017-01-01

Full Text Available Physically unclonable functions (PUFs have been touted for their inherent resistance to invasive attacks and low cost in providing a hardware root of trust for various security applications. SRAM PUFs in particular are popular in industry for key/ID generation. Due to intrinsic process variations, SRAM cells, ideally, tend to have the same start-up behavior. SRAM PUFs exploit this start-up behavior. Unfortunately, not all SRAM cells exhibit reliable start-up behavior due to noise susceptibility. Hence, design enhancements are needed for improving reliability. Some of the proposed enhancements in literature include fuzzy extraction, error-correcting codes and voting mechanisms. All enhancements involve a trade-off between area/power/performance overhead and PUF reliability. This paper presents a design enhancement technique for reliability that improves upon previous solutions. We present simulation results to quantify improvement in SRAM PUF reliability and efficiency. The proposed technique is shown to generate a 128-bit key in ≤0.2 μ s at an area estimate of 4538 μ m 2 with error rate as low as 10 − 6 for intrinsic error probability of 15%.

New Methods for Building-In and Improvement of Integrated Circuit Reliability

NARCIS (Netherlands)

van der Pol, J.A.; van der Pol, Jacob Antonius

2000-01-01

Over the past 30 years the reliability of semiconductor products has improved by a factor of 100 while at the same time the complexity of the circuits has increased by a factor 105. This 7-decade reliability improvement has been realised by implementing a sophisticated reliability assurance system

Improvement of plant reliability in PT. Badak LNG plant

International Nuclear Information System (INIS)

Achmad, S.; Somantri, A.

1997-01-01

PT. Badak's LNG sales commitment has been steadily increasing, therefore, there has been more emphasis to improve and maintain the LNG plant reliability. From plant operation historical records, Badak LNG plant experienced a high number of LNG process train trips and down time for 1977 through 1988. The highest annual number of LNG plant trips (50 times) occurred in 1983 and the longest LNG process train down time (1259 train-hours) occurred in 1988. Since 1989, PT. Badak has been able to reduce the number of LNG process train trips and down time significantly. In 1994 the number of LNG process train trips and was 18 times and the longest LNG process train down time was 377 train-hours. This plant reliability improvement was achieved by implementing plant reliability improvement programs beginning with the design of the new facilities and continuing with the maintenance and modification of the existing facilities. To improve reliability of the existing facilities, PT. Badak has been implementing comprehensive maintenance programs, to reduce the frequency and down time of the plant, such as Preventive and Predictive Maintenance as well as procurement material improvement since PT. Badak location is in a remote area. By implementing the comprehensive reliability maintenance, PT. Badak has been able to reduce the LNG process train trips to 18 and down time to 337 train hours in 1994 with the subsequent maintenance cost reduction. The average PT. Badak plant availability from 1985 to 1995 is 94.59%. New facilities were designed according to the established PT. Badak design philosophy, master plan and specification. Design of new facilities was modified to avoid certain problems from past experience. (au)

Some approaches to system reliability improvement in engineering design

International Nuclear Information System (INIS)

Shen, Kecheng.

1990-01-01

In this thesis some approaches to system reliability improvement in engineering design are studied. In particular, the thesis aims at developing alternative methodologies for ranking of component importance which are more related to the design practice and which are more useful in system synthesis than the existing ones. It also aims at developing component reliability models by means of stress-strength interference which will enable both component reliability prediction and design for reliability. A new methodology for ranking of component importance is first developed based on the notion of the increase of the expected system yield. This methodology allows for incorporation of different improvement actions at the component level such as parallel redundancy, standby redundancy, burn-in, minimal repair and perfect replacement. For each of these improvement actions, the increase of system reliability is studied and used as the component importance measure. A possible connection between the commonly known models of component lifetimes and the stress-strength interference models is suggested. Under some general conditions the relationship between component failure rate and the stress and strength distribution characteristics is studied. A heuristic approach for obtaining bounds on failure probability through stress-strength interference is also presented. A case study and a worked example are presented, which illustrate and verify the developed importance measures and their applications in the analytical as well as synthetical work of engineering design. (author)

Assessment and Improving Methods of Reliability Indices in Bakhtar Regional Electricity Company

Directory of Open Access Journals (Sweden)

Saeed Shahrezaei

2013-04-01

Full Text Available Reliability of a system is the ability of a system to do prospected duties in future and the probability of desirable operation for doing predetermined duties. Power system elements failures data are the main data of reliability assessment in the network. Determining antiseptic parameters is the goal of reliability assessment by using system history data. These parameters help to recognize week points of the system. In other words, the goal of reliability assessment is operation improving and decreasing of the failures and power outages. This paper is developed to assess reliability indices of Bakhtar Regional Electricity Company up to 1393 and the improving methods and their effects on the reliability indices in this network. DIgSILENT Power Factory software is employed for simulation. Simulation results show the positive effect of improving methods in reliability indices of Bakhtar Regional Electricity Company.

Reliability improvement: where do we go from here

International Nuclear Information System (INIS)

Haueter, R.L.

1976-01-01

The present programs and the future plans in the area of power-plant productivity and reliability data collection and analyses are discussed. The shortcomings of the past industry efforts toward improving plant productivity are described, and some suggestions for improvement are presented

44 CFR 150.3 - Nomination process.

Science.gov (United States)

2010-10-01

... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Nomination process. 150.3 Section 150.3 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF... Nomination process. (a) The Nominating Officials nominating Firefighters and Civil Defense Officers shall...

Improving the Reliability of Case-Based Reasoning Systems

Directory of Open Access Journals (Sweden)

Xu Xu

2010-09-01

also discussed in this paper, especially the property that whether inter-feature of case exists redundancy. After that, the reliability of an individual suggested solution is studied. To illustrate these ideas, some experiments and their results are discussed in this paper. The results of experiments show a new route concerning on how to improve the reliability of a CBR system at an overall level.

PWR system reliability improvement activities

International Nuclear Information System (INIS)

Yoshikawa, Yuichiro

1985-01-01

In Japan lacking in energy resources, it is our basic energy policy to accelerate the development program of nuclear power, thereby reducing our dependence. As referred to in the foregoing, every effort has been exerted on our part to improve the PWR system reliability by dint of the so-called 'HOMEMADE' TQC activities, which is our brain-child as a result of applying to the energy industry the quality control philosophy developed in the field of manufacturing industry

7 CFR 1220.203 - Nominations.

Science.gov (United States)

2010-01-01

... CONSUMER INFORMATION Soybean Promotion and Research Order United Soybean Board § 1220.203 Nominations. All... be filled. (e) Nominations may be submitted in order of preference and for the initial Board, in order of preference for staggered terms. Should the Secretary reject any nomination submitted and there...

Equipment reliability improvement process; implementation in Almaraz NPP and Trillo NPP

International Nuclear Information System (INIS)

Risquez Bailon, Aranzazu; Gutierrez Fernandez, Eduardo

2010-01-01

The Equipment Reliability Improvement Process (INPO AP-913) is a non-regulatory process developed by the US Nuclear Industry for improving Plants Availability. This Process integrates and coordinates a broad range of equipment reliability activities into one process, performed by the Plant in a non-centralized way. The integration and coordination of these activities will allow plant personnel to evaluate the trends of important station equipment, develop and implement long-term equipment health plans, monitor equipment performance and condition, and make adjustments to preventive maintenance tasks and frequencies based on equipment operating experience, if necessary, arbitrating operational and design improvements, to reach a Failure-free Operation. This paper describes the methodology of Equipment Reliability Improvement Process, being focused on main aspects of the implementation process, relating to the scope and establishment of an Equipment Reliability Monitoring Plan, which should include and complement the existing mechanisms and organizations in the Plant to monitor the condition and performance of the equipments, with the common aim of achieving an operation free of failures. The paper will describe the tools that Iberdrola Ingenieria has developed to support the implementation and monitoring of the Equipment Reliability Improvement Process, as well as the results and lessons learned from its implementation in Almaraz NPP and Trillo NPP. (authors)

Improvement of standards on functional reliability of electric power systems

International Nuclear Information System (INIS)

Barinov, V.A.; Volkov, G.A.; Kalita, V.V.; Kogan, F.L.; Makarov, S.F.; Manevich, A.S.; Mogirev, V.V.; Sin'chugov, F.I.; Skopintsev, V.A.; Khvoshchinskaya, Z.G.

1993-01-01

Analysis of the most principal aspects of the existing standards and requirements on assuring safety and stability of electric power systems (EPS) and effective (reliable and economical) power supply of consumers is given. The reliability is determined as ability to accomplish the assigned functions. Basic recommendations on improving the standards regulating the safety and reliability of the NPP functioning are formulated

Assessment of power reliability and improvement potential by using ...

African Journals Online (AJOL)

This paper presents the use of smart reclosers for improving reliability of a distribution system of one of the major cities of Ethiopia. As frequent power interruptions are posing a huge problem to the life of the people and the economy, finding a solution to the problem is very essential. Electric reliability has affected social well ...

Improvement of the reliability on nondestructive inspection

International Nuclear Information System (INIS)

Song, Sung Jin; Kim, Young H.; Lee, Hyang Beom; Shin, Young Kil; Jung, Hyun Jo; Park, Ik Keun; Park, Eun Soo

2002-03-01

Retaining reliabilities of nondestructive testing is essential for the life-time maintenance of Nuclear Power Plant. The nondestructive testing methods which are frequently used in the Nuclear Power Plant are eddy current testing for the inspection of steam generator tubes and ultrasonic testing for the inspection of weldments. In order to improve reliabilities of ultrasonic testing and eddy current testing, the subjects carried out in this study are as follows : development of BEM analysis technique for ECT of SG tube, development of neural network technique for the intelligent analysis of ECT flaw signals of SG tubes, development of RFECT technology for the inspection of SG tube, FEM analysis of ultrasonic scattering field, evaluation of statistical reliability of PD-RR test of ultrasonic testing and development of multi-Gaussian beam modeling technique to predict accurate signal of signal beam ultrasonic testing with the efficiency in calculation time

Improvement of the reliability on nondestructive inspection

Energy Technology Data Exchange (ETDEWEB)

Song, Sung Jin; Kim, Young H. [Sungkyunkwan Univ., Suwon (Korea, Republic of); Lee, Hyang Beom [Soongsil Univ., Seoul (Korea, Republic of); Shin, Young Kil [Kunsan National Univ., Gunsan (Korea, Republic of); Jung, Hyun Jo [Wonkwang Univ., Iksan (Korea, Republic of); Park, Ik Keun; Park, Eun Soo [Seoul Nationl Univ., Seoul (Korea, Republic of)

2002-03-15

Retaining reliabilities of nondestructive testing is essential for the life-time maintenance of Nuclear Power Plant. The nondestructive testing methods which are frequently used in the Nuclear Power Plant are eddy current testing for the inspection of steam generator tubes and ultrasonic testing for the inspection of weldments. In order to improve reliabilities of ultrasonic testing and eddy current testing, the subjects carried out in this study are as follows : development of BEM analysis technique for ECT of SG tube, development of neural network technique for the intelligent analysis of ECT flaw signals of SG tubes, development of RFECT technology for the inspection of SG tube, FEM analysis of ultrasonic scattering field, evaluation of statistical reliability of PD-RR test of ultrasonic testing and development of multi-Gaussian beam modeling technique to predict accurate signal of signal beam ultrasonic testing with the efficiency in calculation time.

Determinants of nomination committee: New Zealand evidence

Directory of Open Access Journals (Sweden)

Md. Borhan Uddin Bhuiyan

2011-09-01

Full Text Available A sizable volume of corporate governance literature documents that an independent and competent board of directors matter for organizational success. In order to function effectively, board comprises of different sub-committees and the three most common sub-committees are audit committees, compensation committees and nomination committees. Surprisingly, there is a paucity of research in understanding the determinants of nomination committee notwithstanding the importance of an independent nomination committee in board selection process. We contribute to the nomination committee literature by investigating the factors associated with the determination of nomination committees in New Zealand. We find that cross-sectional variation in the firm-specific characteristics affect the existence of nomination committees. This finding casts doubt on the „one-size-fits all‟ approach of corporate governance. Our logistic regression of the nomination committee determinants indicates that firm size, governance regulation and busy directors are positively associated with the existence of nomination committees, whereas firm leverage, controlling shareholders, and director independence are negatively related to the formation of nomination committees.

Nominate an Organization | Distributed Generation Interconnection

Science.gov (United States)

Collaborative | NREL Nominate an Organization Nominate an Organization Do you know of an organization doing high-quality, innovative work on the interconnection of distributed generation? Want to practices by nominating an organization to be profiled in an online case study! Please include your

Improvement on reliability of control system in power plant

International Nuclear Information System (INIS)

Taguchi, S.; Mizumoto, T.; Hirose, Y.; Kashiwai, J.; Takami, I.; Shono, M.; Roji, Y.; Kizaki, S.

1985-01-01

Studies made of Japanese PWR operating experiences have revealed that failures in the control system are the primary causes of unscheduled shutdowns. An attempt has, therefore, been made to improve the reliability of the control system in order to raise the plant reliability. The following are the procedures applied to solve the issue; study of operating experiences, fault tree analysis and failure mode and effects analysis. Improvement measures are developed for the control system whose failure threatens to cause the plant trip during the plant life. These systems are the main feedwater control system, rod control system, pressurizer control system and main steam control system in the primary control system. As a result, the plant unavailability is expected to be reduced significantly by applying the improvements. The improvements are applied to the plants under construction and the operating plants in co-operation with utilities and vendors. (author)

Reliability Improved Cooperative Communication over Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Zhuangbin Chen

2017-10-01

Full Text Available With the development of smart devices and connection technologies, Wireless Sensor Networks (WSNs are becoming increasingly intelligent. New or special functions can be obtained by receiving new versions of program codes to upgrade their software systems, forming the so-called smart Internet of Things (IoT. Due to the lossy property of wireless channels, data collection in WSNs still suffers from a long delay, high energy consumption, and many retransmissions. Thanks to wireless software-defined networks (WSDNs, software in sensors can now be updated to help them transmit data cooperatively, thereby achieving more reliable communication. In this paper, a Reliability Improved Cooperative Communication (RICC data collection scheme is proposed to improve the reliability of random-network-coding-based cooperative communications in multi-hop relay WSNs without reducing the network lifetime. In WSNs, sensors in different positions can have different numbers of packets to handle, resulting in the unbalanced energy consumption of the network. In particular, nodes in non-hotspot areas have up to 90% of their original energy remaining when the network dies. To efficiently use the residual energy, in RICC, high data transmission power is adopted in non-hotspot areas to achieve a higher reliability at the cost of large energy consumption, and relatively low transmission power is adopted in hotspot areas to maintain the long network lifetime. Therefore, high reliability and a long network lifetime can be obtained simultaneously. The simulation results show that compared with other scheme, RICC can reduce the end-to-end Message Fail delivering Ratio (MFR by 59.4%–62.8% under the same lifetime with a more balanced energy utilization.

ACCURACY AND RELIABILITY AS CRITERIA OF INFORMATIVENESS IN THE NEWS STORY

Directory of Open Access Journals (Sweden)

Melnikova Ekaterina Aleksandrovna

2014-12-01

Full Text Available The article clarifies the meaning of the terms accuracy and reliability of the news story, offers a researcher's approach to obtaining objective data that helps to verify linguistic means of accuracy and reliability presence in the informative structure of the text. The accuracy of the news story is defined as a high relevance degree of event reflection through language representation of its constituents; the reliability is viewed as news story originality that is proved by introducing citations and sources of information considered being trustworthy into the text content. Having based the research on an event nominative density identification method, the author composed nominative charts of 115 news story texts, collected at web-sites of BBC and CNN media corporations; distinguished qualitative and quantitative markers of accuracy and reliability in the news story text; confirmed that the accuracy of the news story is achieved with terminological clearness in nominating event constituents in the text, thematic bind between words, presence of onyms that help deeply identify characteristics of the referent event. The reliability of the text is discovered in eyewitness accounts, quotations, and references to the sources being considered as trustworthy. Accurate revision of associations between accuracy and reliability and informing strategies in digital news nets allowed the author to set two variants of information delivery, that differ in their communicative and pragmatic functions: developing (that informs about major and minor details of an event and truncated (which gives some details thus raising the interest to the event and urging a reader to open a full story.

System ergonomics as an approach to improve human reliability

International Nuclear Information System (INIS)

Bubb, H.

1988-01-01

The application of system technics on ergonomical problems is called system ergonomics. This enables improvements of human reliability by design measures. The precondition for this is the knowledge of how information processing is performed by man and machine. By a separate consideration of sensory processing, cognitive processing, and motory processing it is possible to have a more exact idea of the system element 'man'. The system element 'machine' is well described by differential equations which allow an ergonomical assessment of the manouverability. The knowledge of information processing of man and machine enables a task analysis. This makes appear on one hand the human boundaries depending on the different properties of the task and on the other hand suitable ergonomical solution proposals which improve the reliability of the total system. It is a disadvantage, however, that the change of human reliability by such measures may not be quoted numerically at the moment. (orig.)

Robust and reliable fuel cells; Robusta och tillfoerlitliga braensleceller

Energy Technology Data Exchange (ETDEWEB)

Nordlund, Joakim [Cellkraft AB, Stockholm (Sweden)

2012-03-15

For fuel cells to be a viable alternative for backup power in applications, where reliability is a critical factor, the reliability of fuel cells has to be high and documented. Based on intrinsic properties of fuel cells, it is safe to argue that it is possible to make them highly reliable, but to unleash the full reliability potential of fuel cells, some great engineering work has to be performed. Cellkraft has since many years been addressing this issue and this project is an important piece of this puzzle. The project included both a large number of laboratory testing of fuel cells and long experiments in field environment to verify the results from the laboratory work. The development work performed within this project is a solid base for the continuous work to fulfil Cellkraft's own, tough, technical reliability targets. The project targets below were achieved within this project: 1. The fuel cell start with 100 % reliability. 2. The fuel cell provides nominal power within 30 seconds in 100 % of the cases. 3. The fuel cell keeps providing nominal power as long as there is a demand in 100 % of the cases. 4. No cell in the fuel cell deviates from the mean cell potential with more than 0,1 V at full power.

The nominalized infinitive in French : structure and change

Directory of Open Access Journals (Sweden)

Petra Sleeman

2010-01-01

Full Text Available Many European languages have both nominal and verbal nominalized infinitives. They differ, however, in the degree to which the nominalized infinitives possess nominal and verbal properties. In this paper, nominalized infinitives in French are analyzed. It is shown that, whereas Old French was like other Romance languages in possessing both nominal and verbal nominalized infinitives, Modern French differs parametrically from other Romance languages in not having verbal infinitives and in allowing nominal infinitives only in a scientific style of speech. An analysis is proposed, within a syntactic approach to morphology. that tries to account for the loss of the verbal properties of the nominalized infinitive in French. It is proposed that the loss results from a change in word order (the loss of the OV word order in favor of the VO word order and a change in the morphological analysis of the nominalized infinitive: instead of a zero suffix analysis, a derivational analysis was adopted by the speakers of French. It is argued that the derivational analysis restricted nominalization to Vo, which made nominalization of infinitives less ìverbalî than in other Romance languages

Accident Sequence Evaluation Program: Human reliability analysis procedure

International Nuclear Information System (INIS)

Swain, A.D.

1987-02-01

This document presents a shortened version of the procedure, models, and data for human reliability analysis (HRA) which are presented in the Handbook of Human Reliability Analysis With emphasis on Nuclear Power Plant Applications (NUREG/CR-1278, August 1983). This shortened version was prepared and tried out as part of the Accident Sequence Evaluation Program (ASEP) funded by the US Nuclear Regulatory Commission and managed by Sandia National Laboratories. The intent of this new HRA procedure, called the ''ASEP HRA Procedure,'' is to enable systems analysts, with minimal support from experts in human reliability analysis, to make estimates of human error probabilities and other human performance characteristics which are sufficiently accurate for many probabilistic risk assessments. The ASEP HRA Procedure consists of a Pre-Accident Screening HRA, a Pre-Accident Nominal HRA, a Post-Accident Screening HRA, and a Post-Accident Nominal HRA. The procedure in this document includes changes made after tryout and evaluation of the procedure in four nuclear power plants by four different systems analysts and related personnel, including human reliability specialists. The changes consist of some additional explanatory material (including examples), and more detailed definitions of some of the terms. 42 refs

Designing incentive market mechanisms for improving restructured power system reliabilities

DEFF Research Database (Denmark)

Ding, Yi; Østergaard, Jacob; Wu, Qiuwei

2011-01-01

state. The reliability management of producers usually cannot be directly controlled by the system operators in a restructured power system. Producers may have no motivation to improve their reliabilities, which can result in serious system unreliability issues in the new environment. Incentive market...... mechanisms for improving the restructured power system reliabilities have been designed in this paper. In the proposed incentive mechanisms, penalty will be implemented on a producer if the failures of its generator(s) result in the variation of electricity prices. Incentive market mechanisms can motivate......In a restructured power system, the monopoly generation utility is replaced by different electricity producers. There exists extreme price volatility caused by random failures by generation or/and transmission systems. In these cases, producers' profits can be much higher than those in the normal...

Technology and equipment to improve reliability of pipeline transport

Science.gov (United States)

Suleimanov, D. F.; Shulayev, N. S.; Bondar, K. E.; Laponov, S. V.; Uzinger, A. A.

2017-10-01

The article is dedicated to development of technology and hardware design of method pipeline transport reliability improving by improving the isolated coating properties modified by microwave radiation. The article describes the technology of the modification process of the coating and instrumentation production, which allows improving operational properties not only in stationary conditions in the manufacture of the insulation coating, but also during its replacement in the field.

Parametric motivation bases of floranimic nomination

Directory of Open Access Journals (Sweden)

Olga P. Ryabko

2016-09-01

Full Text Available The period of further development in the cognitive theory of nomination has been extensive in recent years. Our research has been concentrated on the formation of conceptual foundations in cognitive theory of flora nomination. The macrofield of flora namings embraces three microfields: parametric, pragmatic and locative-temporal ones. They determine motivation processes in cognitive theory of flora nomination, i.e., the presentation of systematic qualities in flora namings in the English language. The description and characterization of such qualities presupposes the existence of their taxonomic organization and methodology criteria, both general and practical ones. Flora namings on the phenomenological level are considered to be the products of naöve-cognitive consciousness of language speakers. They are determined, from the one hand, by the external perceptive adaptations (parametric nomination and, from the other hand, by practical needs (pure pragmatic nomination and local-temporal nomination. In this article we have concentrated on the complex parametric motivated basis of flora nomination. It is presented by a number of qualities, firstly, by dominative qualities («form», «appearance and manner of growth», «color», secondly, by peripheral qualities («odour», «taste», «size» and, finally, by minor qualities («sound», «weight», «genger». In the structure of complex parametric nomination the only one conerete qualitative element from the whole combination of qualities becomes the leading one. The cultural-archetypal dominant element determines. In each concrete situation, the choice of preferable prototypal motivated quality.

Aviation Fuel System Reliability and Fail-Safety Analysis. Promising Alternative Ways for Improving the Fuel System Reliability

Directory of Open Access Journals (Sweden)

I. S. Shumilov

2017-01-01

Full Text Available The paper deals with design requirements for an aviation fuel system (AFS, AFS basic design requirements, reliability, and design precautions to avoid AFS failure. Compares the reliability and fail-safety of AFS and aircraft hydraulic system (AHS, considers the promising alternative ways to raise reliability of fuel systems, as well as elaborates recommendations to improve reliability of the pipeline system components and pipeline systems, in general, based on the selection of design solutions.It is extremely advisable to design the AFS and AHS in accordance with Aviation Regulations АП25 and Accident Prevention Guidelines, ICAO (International Civil Aviation Association, which will reduce risk of emergency situations, and in some cases even avoid heavy disasters.ATS and AHS designs should be based on the uniform principles to ensure the highest reliability and safety. However, currently, this principle is not enough kept, and AFS looses in reliability and fail-safety as compared with AHS. When there are the examined failures (single and their combinations the guidelines to ensure the AFS efficiency should be the same as those of norm-adopted in the Regulations АП25 for AHS. This will significantly increase reliability and fail-safety of the fuel systems and aircraft flights, in general, despite a slight increase in AFS mass.The proposed improvements through the use of components redundancy of the fuel system will greatly raise reliability of the fuel system of a passenger aircraft, which will, without serious consequences for the flight, withstand up to 2 failures, its reliability and fail-safety design will be similar to those of the AHS, however, above improvement measures will lead to a slightly increasing total mass of the fuel system.It is advisable to set a second pump on the engine in parallel with the first one. It will run in case the first one fails for some reasons. The second pump, like the first pump, can be driven from the

Advanced solutions for operational reliability improvements

Energy Technology Data Exchange (ETDEWEB)

Holmberg, K [VTT Manufacturing Technology, Espoo (Finland)

1998-12-31

A great number of new technical tools are today developed for improved operational reliability of machines and industrial equipment. Examples of such techniques and tools recently developed at the Technical Research Centre of Finland (VTT) are: metallographic approach for steam-piping lifetime estimation, an expert system AURORA for corrosion prediction and material selection, an automatic image-processing-based on-line wear particle analysis system, microsensors for condition monitoring, a condition monitoring and expert system, CEPDIA, for the diagnosis of centrifugal pumps, a machine tool analysis and diagnostic expert system, non-leakage magnetic fluid seals with extended lifetime and diamond-like surface coatings on components with decreased friction and wear properties. A hyperbook-supported holistic approach to problem solving in maintenance and reliability engineering has been developed to help the user achieve a holistic understanding of the problem and its relationships, to navigate among the several technical tools and methods available, and to find those suitable for his application. (orig.)

Advanced solutions for operational reliability improvements

Energy Technology Data Exchange (ETDEWEB)

Holmberg, K. [VTT Manufacturing Technology, Espoo (Finland)

1997-12-31

A great number of new technical tools are today developed for improved operational reliability of machines and industrial equipment. Examples of such techniques and tools recently developed at the Technical Research Centre of Finland (VTT) are: metallographic approach for steam-piping lifetime estimation, an expert system AURORA for corrosion prediction and material selection, an automatic image-processing-based on-line wear particle analysis system, microsensors for condition monitoring, a condition monitoring and expert system, CEPDIA, for the diagnosis of centrifugal pumps, a machine tool analysis and diagnostic expert system, non-leakage magnetic fluid seals with extended lifetime and diamond-like surface coatings on components with decreased friction and wear properties. A hyperbook-supported holistic approach to problem solving in maintenance and reliability engineering has been developed to help the user achieve a holistic understanding of the problem and its relationships, to navigate among the several technical tools and methods available, and to find those suitable for his application. (orig.)

Graham nominated to Head OSTP

Science.gov (United States)

President Ronald Reagan has nominated William R. Graham as science advisor and director of the Office of Science and Technology (OSTP). Graham, who is currently deputy director of the National Aeronautics and Space Administration (NASA), had been acting director of the agency until the nomination of James C. Fletcher.Graham's nomination, which must be confirmed by the U.S. Senate, comes 6 months after the resignation of George A. Keyworth from the post. John P. McTague had been acting science advisor since Keyworth's resignation (Eos, December 10, 1985, p. 1219).

Training Improves Interobserver Reliability for the Diagnosis of Scaphoid Fracture Displacement

NARCIS (Netherlands)

Buijze, Geert A.; Guitton, Thierry G.; van Dijk, C. Niek; Ring, David; Osterman, A. Lee; Wahegaonkar, Abhijeet L.; Ladd, Amy; Barquet, Antonio; van Vugt, Arie B.; Shyam, Ashok K.; Swigart, Carrie; Coles, Chad P.; Zalavras, Charalampos; Goldfarb, Charles A.; Cassidy, Charles; Allan, Christopher; Beingessner, Daphne; Kalainov, David M.; Eygendaal, Denise; Sancheti, Parag; Feibel, Robert J.; Rocha, Steve; Grosso, Elena; Frihagen, Frede; Dyer, George S. M.; Athwal, George S.; Goslings, J. Carel; Della Rocca, Gregory J.; Harris, Ian; Fanuele, Jason C.; Lawton, Jeff; Jiuliano, John; McAuliffe, John; Capo, John T.; Conflitti, Joseph M.; Segalman, Keith; Egol, Kenneth; Ponsen, Kornelis J.; Jeray, Kyle; Lattanza, Lisa; Catalano, Louis; Swiontkowski, Marc; Boyer, Martin; Richardson, Martin; Soong, Maximillian; Baskies, Michael; Prayson, Michael; McKee, Michael; Chen, Neal C.; Kloen, Peter

2012-01-01

The diagnosis of displacement in scaphoid fractures is notorious for poor interobserver reliability. We tested whether training can improve interobserver reliability and sensitivity, specificity, and accuracy for the diagnosis of scaphoid fracture displacement on radiographs and CT scans. Sixty-four

7 CFR 1221.101 - Nominations.

Science.gov (United States)

2010-01-01

... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... INFORMATION ORDER Sorghum Promotion, Research, and Information Order Sorghum Promotion, Research, and Information Board § 1221.101 Nominations. All nominations authorized under this section shall be made in the...

Improving fMRI reliability in presurgical mapping for brain tumours.

Science.gov (United States)

Stevens, M Tynan R; Clarke, David B; Stroink, Gerhard; Beyea, Steven D; D'Arcy, Ryan Cn

2016-03-01

Functional MRI (fMRI) is becoming increasingly integrated into clinical practice for presurgical mapping. Current efforts are focused on validating data quality, with reliability being a major factor. In this paper, we demonstrate the utility of a recently developed approach that uses receiver operating characteristic-reliability (ROC-r) to: (1) identify reliable versus unreliable data sets; (2) automatically select processing options to enhance data quality; and (3) automatically select individualised thresholds for activation maps. Presurgical fMRI was conducted in 16 patients undergoing surgical treatment for brain tumours. Within-session test-retest fMRI was conducted, and ROC-reliability of the patient group was compared to a previous healthy control cohort. Individually optimised preprocessing pipelines were determined to improve reliability. Spatial correspondence was assessed by comparing the fMRI results to intraoperative cortical stimulation mapping, in terms of the distance to the nearest active fMRI voxel. The average ROC-r reliability for the patients was 0.58±0.03, as compared to 0.72±0.02 in healthy controls. For the patient group, this increased significantly to 0.65±0.02 by adopting optimised preprocessing pipelines. Co-localisation of the fMRI maps with cortical stimulation was significantly better for more reliable versus less reliable data sets (8.3±0.9 vs 29±3 mm, respectively). We demonstrated ROC-r analysis for identifying reliable fMRI data sets, choosing optimal postprocessing pipelines, and selecting patient-specific thresholds. Data sets with higher reliability also showed closer spatial correspondence to cortical stimulation. ROC-r can thus identify poor fMRI data at time of scanning, allowing for repeat scans when necessary. ROC-r analysis provides optimised and automated fMRI processing for improved presurgical mapping. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence

Improving patient safety: patient-focused, high-reliability team training.

Science.gov (United States)

McKeon, Leslie M; Cunningham, Patricia D; Oswaks, Jill S Detty

2009-01-01

Healthcare systems are recognizing "human factor" flaws that result in adverse outcomes. Nurses work around system failures, although increasing healthcare complexity makes this harder to do without risk of error. Aviation and military organizations achieve ultrasafe outcomes through high-reliability practice. We describe how reliability principles were used to teach nurses to improve patient safety at the front line of care. Outcomes include safety-oriented, teamwork communication competency; reflections on safety culture and clinical leadership are discussed.

Evaluation and improvement of nondestructive evaluation reliability for inservice inspection of light water reactors

International Nuclear Information System (INIS)

Bates, D.J.; Deffenbaugh, J.D.; Good, M.S.; Heasler, P.G.; Mart, G.A.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.; Van Fleet, L.G.

1987-01-01

The Evaluation and Improvement of NDE Reliability for Inservice Inspection (ISI) of Light Water Reactors (NDE Reliability) Program at Pacific Northwest Laboratory (PNL) was established to determine the reliability of current ISI techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this NRC program are to: determine the reliability of ultrasonic ISI performed on commercial light-water reactor (LWR) primary systems, using probabilistic fracture mechanics analysis, determine the impact of NDE unreliability on system safety and determine the level of inspection reliability required to ensure a suitably low failure probability, evaluate the degree of reliability improvement that could be achieved using improved and advanced NDE techniques, based on material properties, service conditions, and NDE uncertainties, recommend revisions to ASME Code, Section XI, and Regulatory Requirements that will ensure suitably low failure probabilities. The scope of this program is limited to ISI of primary systems; the results and recommendations may also be applicable to Class II piping systems

Stand development and reliability tests of the thermal monitoring means for NPP

International Nuclear Information System (INIS)

Nalivaev, V.I.; Nikul'shin, V.S.; Kichigin, A.B.; Dirin, V.F.

2003-01-01

The paper is devoted to the reliability tests of thermoelectric thermometers and resistance thermometers during their operation in the nominal mode. Five stands Reliability are developed and operate for realization of tests of all manufactured thermal converters. delivered at NPP. Description of all stands are presented [ru

Evaluation and improvement in nondestructive examination (NDE) reliability for inservice inspection of light water reactors

International Nuclear Information System (INIS)

Doctor, S.R.; Andersen, E.S.; Bowey, R.E.; Diaz, A.A.; Good, M.S.; Heasler, P.G.; Hockey, R.L.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.; Vo, T.V.

1991-01-01

This program is intended to establish the effectiveness, reliability and adequacy of inservice inspection of reactor pressure vessels and primary piping systems and the impact of ISI reliability on system integrity. The objectives of the program include: (a) determine the effectiveness and reliability of ultrasonic inservice inspection (ISI) performed on commercial, light water reactor pressure vessels and piping; (b) recommend Code changes to the inspection procedures to improve the reliability of ISI; (c) using fracture mechanics analysis, determine the impact of NDE unreliability on system safety and determine the level of inspection reliability required to assure a suitably low failure probability; (d) evaluate the degree of reliability improvement which could be achieved using improved NDE techniques; and (e) based on importance of component to safety, material properties, service conditions, and NDE uncertainties, formulate improved inservice inspection criteria (including sampling plan, frequency, and reliability of inspection) for revisions to ASME Section XI and regulatory requirements needed to assure suitably low failure probabilities

Evaluation and improvement in nondestructive examination (NDE) reliability for in-service inspection of light water reactors

International Nuclear Information System (INIS)

Deffenbaugh, J.D.; Good, M.S.; Green, E.R.; Heasler, P.G.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.

1988-01-01

The evaluation and improvement of NDE Reliability for In-service Inspection (ISI) of Light Water Reactors (NDE Reliability) Program at Pacific Northwest Laboratory (PNL) was established to determine the reliability of current ISI techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this NRC program are to: determine the reliability of ultrasonic ISI performed on commercial light-water reactor (LWR) primary systems; determine the impact of NDE unreliability on system safety and determine the level of inspection reliability required to ensure a suitably low failure probability using probabilistic fracture mechanics analysis; evaluate the degree of reliability improvement that could be achieved using improved and advanced NDE technique; and recommend revisions to ASME Code, Section XI, and Regulatory Requirements, based on material properties, service conditions, and NDE uncertainties, that will ensure suitably low failure probabilities. The program consists of three basic tasks: a Piping task, a Pressure Vessel task, and an Evaluation and Improvement in NDE Reliability task. The major efforts were concentrated in the Piping task and the Evaluation and Improvement in NDE Reliability task

Accident Sequence Evaluation Program: Human reliability analysis procedure

Energy Technology Data Exchange (ETDEWEB)

Swain, A.D.

1987-02-01

This document presents a shortened version of the procedure, models, and data for human reliability analysis (HRA) which are presented in the Handbook of Human Reliability Analysis With emphasis on Nuclear Power Plant Applications (NUREG/CR-1278, August 1983). This shortened version was prepared and tried out as part of the Accident Sequence Evaluation Program (ASEP) funded by the US Nuclear Regulatory Commission and managed by Sandia National Laboratories. The intent of this new HRA procedure, called the ''ASEP HRA Procedure,'' is to enable systems analysts, with minimal support from experts in human reliability analysis, to make estimates of human error probabilities and other human performance characteristics which are sufficiently accurate for many probabilistic risk assessments. The ASEP HRA Procedure consists of a Pre-Accident Screening HRA, a Pre-Accident Nominal HRA, a Post-Accident Screening HRA, and a Post-Accident Nominal HRA. The procedure in this document includes changes made after tryout and evaluation of the procedure in four nuclear power plants by four different systems analysts and related personnel, including human reliability specialists. The changes consist of some additional explanatory material (including examples), and more detailed definitions of some of the terms. 42 refs.

7 CFR 958.28 - Nominations.

Science.gov (United States)

2010-01-01

... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE ONIONS GROWN IN CERTAIN DESIGNATED... Nominations. Nominations from which the Secretary may select the members of the Idaho-Eastern Oregon Onion... more meetings of producers and of handlers in each of the districts, or portions of the production area...

7 CFR 932.29 - Nominations.

Science.gov (United States)

2010-01-01

... Secretary: (i) Meetings shall be held in each producer district for the purpose of selecting candidates for the member and alternate member nominations; (ii) Those candidates selected at the producer meetings... meetings called by the committee, the independent handlers shall nominate a qualified person for each...

Nominal group technique: a brainstorming tool for identifying areas to improve pain management in hospitalized patients.

Science.gov (United States)

Peña, Adolfo; Estrada, Carlos A; Soniat, Debbie; Taylor, Benjamin; Burton, Michael

2012-01-01

Pain management in hospitalized patients remains a priority area for improvement; effective strategies for consensus development are needed to prioritize interventions. To identify challenges, barriers, and perspectives of healthcare providers in managing pain among hospitalized patients. Qualitative and quantitative group consensus using a brainstorming technique for quality improvement-the nominal group technique (NGT). One medical, 1 medical-surgical, and 1 surgical hospital unit at a large academic medical center. Nurses, resident physicians, patient care technicians, and unit clerks. Responses and ranking to the NGT question: "What causes uncontrolled pain in your unit?" Twenty-seven health workers generated a total of 94 ideas. The ideas perceived contributing to a suboptimal pain control were grouped as system factors (timeliness, n = 18 ideas; communication, n = 11; pain assessment, n = 8), human factors (knowledge and experience, n = 16; provider bias, n = 8; patient factors, n = 19), and interface of system and human factors (standardization, n = 14). Knowledge, timeliness, provider bias, and patient factors were the top ranked themes. Knowledge and timeliness are considered main priorities to improve pain control. NGT is an efficient tool for identifying general and context-specific priority areas for quality improvement; teams of healthcare providers should consider using NGT to address their own challenges and barriers. Copyright © 2011 Society of Hospital Medicine.

Improvement of reliability of heater and condenser

International Nuclear Information System (INIS)

Yamagishi, Hiroki

1988-01-01

Recently, the diversification of the operation modes of power plants has advanced as well as daily start and stop and weekly start and stop operations, as the result, the needs for the reliability improvement of various heat exchangers around steam turbines heighten. In newly constructed plants, the design to meet this demand is carried out, but also in existing platns, the application of the latest technology is investigated. As for the reliability of condensers, aluminum brass cooling tubes have been used by doing the optimal maintenance and taking the measures against deposit attack. In the case of requiring high reliability, the examples of adopting titanium cooling tubes increased. The technology of titanium tube condensers, completely assembled condensers, the replacement of existing brass tubes with titanium tubes and so on are discussed. In the case of feed heaters, the deterioration phenomena due to the lapse of long years, such as the attack of steel tube inlet, the drain attack on the external surfaces of steel tubes, the ammonia attack of aluminum brass tubes and the adhesion of scale to heaters, are explained, and the countermeasures are shown. (Kako, I.)

Improving Reliability, Security, and Efficiency of Reconfigurable Hardware Systems (Habilitation)

NARCIS (Netherlands)

Ziener, Daniel

2017-01-01

In this treatise,  my research on methods to improve efficiency, reliability, and security of reconfigurable hardware systems, i.e., FPGAs, through partial dynamic reconfiguration is outlined. The efficiency of reconfigurable systems can be improved by loading optimized data paths on-the-fly on an

System 80+ Design and Licensing : Improving Plant Reliability

International Nuclear Information System (INIS)

Newman, Robert E.

1989-01-01

The U. S. nuclear industry is striving to improve plant reliability and availability through improved plant design, component designs and plant maintenance. In an effort to improve safety and to demonstrate that commercial nuclear power is economically competitive with other energy sources, the utilities, nuclear vendors, architect engineers and constructors, and component suppliers are all participating in an industry-wide effort to develop improved Light Water Reactor (LWR) designs that are based upon the many years of successful LWR operation. In an age when the world faces the environmental pressures of the greenhouse effect and acid rain, electricity generated from nuclear energy must play an increasing role in the energy picture of Korea, the United States and the rest of the world. This paper discusses the plant availability requirement that has been established by the industry-wide effort mentioned above. After briefly describing Combustion Engineering's program for development of the System 80 Plus standard design and the participation of the Korea Advanced Energy Research Institute (KAERI) in the program, the paper then describes the design features that are being incorporated into System 80+. The industry ALRR Program has established a very ambitious criterion of 87% for the plant availability of future nuclear units. To satisfy such a requirement, the next generation of nuclear plants will include a great many design improvements that reflect the hundreds of years of operating experience that we have accrued. C-ESA's System 80+ will include a number of design changes that improve operating margins and make the plant easier to operate and maintain. Not surprisingly, there is a great deal of overlap between improved safety and improved reliability. In the end, our design will satisfy the future needs of the utilities, the regulators, and the public. C-E is very pleased that KAERI is working with US to achieve these important goals

Identification of emergent off-nominal operational requirements during conceptual architecting of the more electric aircraft

Science.gov (United States)

Armstrong, Michael James

Increases in power demands and changes in the design practices of overall equipment manufacturers has led to a new paradigm in vehicle systems definition. The development of unique power systems architectures is of increasing importance to overall platform feasibility and must be pursued early in the aircraft design process. Many vehicle systems architecture trades must be conducted concurrent to platform definition. With an increased complexity introduced during conceptual design, accurate predictions of unit level sizing requirements must be made. Architecture specific emergent requirements must be identified which arise due to the complex integrated effect of unit behaviors. Off-nominal operating scenarios present sizing critical requirements to the aircraft vehicle systems. These requirements are architecture specific and emergent. Standard heuristically defined failure mitigation is sufficient for sizing traditional and evolutionary architectures. However, architecture concepts which vary significantly in terms of structure and composition require that unique failure mitigation strategies be defined for accurate estimations of unit level requirements. Identifying of these off-nominal emergent operational requirements require extensions to traditional safety and reliability tools and the systematic identification of optimal performance degradation strategies. Discrete operational constraints posed by traditional Functional Hazard Assessment (FHA) are replaced by continuous relationships between function loss and operational hazard. These relationships pose the objective function for hazard minimization. Load shedding optimization is performed for all statistically significant failures by varying the allocation of functional capability throughout the vehicle systems architecture. Expressing hazards, and thereby, reliability requirements as continuous relationships with the magnitude and duration of functional failure requires augmentations to the traditional

NASA, NOAA administrators nominated

Science.gov (United States)

Richman, Barbara T.

President Ronald Reagan recently said he intended to nominate James Montgomery Beggs as NASA Administrator and John V. Byrne as NOAA Administrator. These two positions are key scientific posts that have been vacant since the start of the Reagan administration on January 20. The President also said he intends to nominate Hans Mark as NASA Deputy Administrator. At press time, Reagan had not designated his nominee for the director of the Office of Science and Technology Policy.

78 FR 69018 - Improving the Resiliency of Mobile Wireless Communications Networks; Reliability and Continuity...

Science.gov (United States)

2013-11-18

... consumers value overall network reliability and quality in selecting mobile wireless service providers, they...-125] Improving the Resiliency of Mobile Wireless Communications Networks; Reliability and Continuity... (Reliability NOI) in 2011 to ``initiate a comprehensive examination of issues regarding the reliability...

QA support for TFTR reliability improvement program in preparation for DT operation

International Nuclear Information System (INIS)

Parsells, R.F.; Howard, H.P.

1987-01-01

As TFTR approaches experiments in the Q=1 regime, machine reliability becomes a major variable in achieving experimental objectives. This paper describes the methods used to quantify current reliability levels, levels required for D-T operations, proposed methods for reliability growth and improvement, and tracking of reliability performance in that growth. Included in this scope are data collection techniques and short comings, bounding current reliability on the upper end, and requirements for D-T operations. Problem characterization through Pareto diagrams provides insight into recurrent failure modes and the use of Duane plots for charting of reliability changes both cumulative and instantaneous, is explained and demonstrated

Nominalization in Igbo Language: A Morphological Approach ...

African Journals Online (AJOL)

Nominalization is a process of creating nouns from other word classes. The Igbo language as a verbal language derives so many nominal from verbs. Some scholars of Igbo studies are not well informed on how so many nominal have their root or etymology on verb roots. In the light of this background, the researcher ...

Deverbal Nominals and Telicity in Japanese.

Science.gov (United States)

Tsujimura, Natsuko; Iida, Masayo

1999-01-01

Investigates deverbal nominalization involving the suffix "kake" in Japanese. Argues that kake nominalization induces two different meanings, the halfway and the inception reading, and different constraints are called for depending on these two meanings. (Author/VWL)

Reliability improvement through alternative designs-A case study

International Nuclear Information System (INIS)

Kumar, Saurabh; Chattopadhyay, Gopi; Kumar, Uday

2007-01-01

In today's competitive world, reliability of equipment is extremely important to maintain quality and delivery deadlines. This is achieved by using proper maintenance and design changes for unreliable subsystems and components of a complex system. It is significant to develop a strategy for maintenance, replacement and design changes related to those subsystems and components. An analysis of down time along with causes is essential to identify the unreliable components and subsystems. This paper presents an analysis of failure data of solenoid coils of automatic internal grinding machine used in a bearing manufacturing plant. It analyses various replacement and change of design options such as introduction of pneumatic system in place of electromagnetic solenoids for improvement of reliability of the plunger movement mechanism

Improving inspection reliability through operator selection and training

International Nuclear Information System (INIS)

McGrath, Bernard; Carter, Luke

2013-01-01

A number of years ago the UK's Health and Safety Executive sponsored a series of three PANI projects investigating the application of manual ultrasonics, which endeavoured to establish the necessary steps that ensure a reliable inspection is performed. The results of the three projects were each reported separately on completion and also presented at number of international conferences. This paper summarises the results of these projects from the point of view of operator performance. The correlation of operator ultrasonic performance with results of aptitude tests is presented along with observations on the impact of training and qualifications of the operators. The results lead to conclusions on how the selection and training of operators could be modified to improve reliability of inspections.

Endogenous Growth, Monetary Shocks and Nominal Rigidities

OpenAIRE

Annicchiarico, Barbara; Pelloni, Alessandra; Lorenza, Rossi

2010-01-01

We introduce endogenous growth in an otherwise standard NK model with staggered prices and wages. Some results follow: (i) monetary volatility negatively affects long-run growth; (ii) the relation between nominal volatility and growth depends on the persistence of the nominal shocks and on the Taylor rule considered; (iii) a Taylor rule with smoothing increases the negative effect of nominal volatility on mean growth.

Training improves interobserver reliability for the diagnosis of scaphoid fracture displacement.

Science.gov (United States)

Buijze, Geert A; Guitton, Thierry G; van Dijk, C Niek; Ring, David

2012-07-01

The diagnosis of displacement in scaphoid fractures is notorious for poor interobserver reliability. We tested whether training can improve interobserver reliability and sensitivity, specificity, and accuracy for the diagnosis of scaphoid fracture displacement on radiographs and CT scans. Sixty-four orthopaedic surgeons rated a set of radiographs and CT scans of 10 displaced and 10 nondisplaced scaphoid fractures for the presence of displacement, using a web-based rating application. Before rating, observers were randomized to a training group (34 observers) and a nontraining group (30 observers). The training group received an online training module before the rating session, and the nontraining group did not. Interobserver reliability for training and nontraining was assessed by Siegel's multirater kappa and the Z-test was used to test for significance. There was a small, but significant difference in the interobserver reliability for displacement ratings in favor of the training group compared with the nontraining group. Ratings of radiographs and CT scans combined resulted in moderate agreement for both groups. The average sensitivity, specificity, and accuracy of diagnosing displacement of scaphoid fractures were, respectively, 83%, 85%, and 84% for the nontraining group and 87%, 86%, and 87% for the training group. Assuming a 5% prevalence of fracture displacement, the positive predictive value was 0.23 in the nontraining group and 0.25 in the training group. The negative predictive value was 0.99 in both groups. Our results suggest training can improve interobserver reliability and sensitivity, specificity and accuracy for the diagnosis of scaphoid fracture displacement, but the improvements are slight. These findings are encouraging for future research regarding interobserver variation and how to reduce it further.

Reliability database development and plant performance improvement effort at Korea Hydro and Nuclear Power Co

International Nuclear Information System (INIS)

Oh, S. J.; Hwang, S. W.; Na, J. H.; Lim, H. S.

2008-01-01

Nuclear utilities in recent years have focused on improved plant performance and equipment reliability. In U.S., there is a movement toward process integration. Examples are INPO AP-913 equipment reliability program and the standard nuclear performance model developed by NEI. Synergistic effect from an integrated approach can be far greater than as compared to individual effects from each program. In Korea, PSA for all Korean NPPs (Nuclear Power Plants) has been completed. Plant performance monitoring and improvement is an important goal for KHNP (Korea Hydro and Nuclear Power Company) and a risk monitoring system called RIMS has been developed for all nuclear plants. KHNP is in the process of voluntarily implementing maintenance rule program similar to that in U.S. In the future, KHNP would like to expand the effort to equipment reliability program and to achieve highest equipment reliability and improved plant performance. For improving equipment reliability, the current trend is moving toward preventive/predictive maintenance from corrective maintenance. With the emphasis on preventive maintenance, the failure cause and operation history and environment are important. Hence, the development of accurate reliability database is necessary. Furthermore, the database should be updated regularly and maintained as a living program to reflect the current status of equipment reliability. This paper examines the development of reliability database system and its application of maintenance optimization or Risk Informed Application (RIA). (authors)

Advanced reliability improvement of AC-modules (ARIA)

International Nuclear Information System (INIS)

Rooij, P.; Real, M.; Moschella, U.; Sample, T.; Kardolus, M.

2001-09-01

The AC-module is a relatively new development in PV-system technology and offers significant advantages over conventional PV-systems with a central inverter : e.g. increased modularity, ease of installation and freedom of system design. The Netherlands and Switzerland have a leading position in the field of AC-modules, both in terms of technology and of commercial and large-scale application. An obstacle towards large-scale market introduction of AC-modules is that the reliability and operational lifetime of AC-modules and the integrated inverters in particular are not yet proven. Despite the advantages, no module-integrated inverter has yet achieved large scale introduction. The AC-modules will lower the barrier towards market penetration. But due to the great interest in the new AC-module technology there is the risk of introducing a not fully proven product. This may damage the image of PV-systems. To speed up the development and to improve the reliability, research institutes and PV-industry will address the aspects of reliability and operational lifetime of AC-modules. From field experiences we learn that in general the inverter is still the weakest point in PV-systems. The lifetime of inverters is an important factor on reliability. Some authors are indicating a lifetime of 1.5 years, whereas the field experiences in Germany and Switzerland have shown that for central inverter systems, an availability of 97% has been achieved in the last years. From this point of view it is highly desirable that the operational lifetime and reliability of PV-inverters and especially AC-modules is demonstrated/improved to make large scale use of PV a success. Module Integrated Inverters will most likely be used in modules in the power range between 100 and 300 Watt DC-power. These are modules with more than 100 cells in series, assuming that the module inverter will benefit from the higher voltage. Hot-spot is the phenomenon that can occur when one or more cells of a string

Evaluation and improvement in nondestructive examination (NDE) reliability for inservice inspection of light water reactors

International Nuclear Information System (INIS)

Doctor, S.R.; Deffenbaugh, J.D.; Good, M.S.; Green, E.R.; Heasler, P.G.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.

1988-01-01

The Evaluation and Improvement of NDE Reliability for Inservice Inspection of Light Water Reactors (NDE Reliability) program at the Pacific Northwest Laboratory was established by the NRC to determine the reliability of current inservice inspection (ISI) techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this program include determining the reliability of ISI performed on the primary systems of commercial light-water reactors (LWRs); using probabilistic fracture mechanics analysis to determine the impact of NDE unreliability on system safety; and evaluating reliability improvements that can be achieved with improved and advanced technology. A final objective is to formulate recommended revisions to ASME Code and Regulatory requirements, based on material properties, service conditions and NDE uncertainties. The program scope is limited to ISI of the primary systems including the piping, vessel, and other inspected components. This is a progress report covering the programmatic work from October 1986 through September 1987. (author)

Evaluation and improvement in nondestructive examination (NDE) reliability for inservice inspection of light water reactors

International Nuclear Information System (INIS)

Doctor, S.R.; Deffenbaugh, J.D.; Good, M.S.; Green, E.R.; Heasler, P.G.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.

1988-01-01

The Evaluation and Improvement of NDE Reliability for Inservice Inspection of Light Water Reactor (NDE Reliability) program at the Pacific Northwest Laboratory was established by the NRC to determine the reliability of current inservice inspection (ISI) techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this program include determining the reliability of ISI performed on the primary systems of commercial light-water reactors (LWRs); using probabilistic fracture mechanics analysis to determine the impact of NDE unreliability on system safety; and evaluating reliability improvements that can be achieved with improved and advanced technology. A final objective is to formulate recommended revisions to ASME Code and Regulatory requirements, based on material properties, service conditions, and NDE uncertainties. The program scope is limited to ISI of the primary systems including the piping, vessel, and other inspected components. This is a progress report covering the programmatic work from October 1986 through September 1987

29 CFR 452.58 - Self-nomination.

Science.gov (United States)

2010-07-01

... GENERAL STATEMENT CONCERNING THE ELECTION PROVISIONS OF THE LABOR-MANAGEMENT REPORTING AND DISCLOSURE ACT... candidates and thus is inconsistent with the provisions of title IV. 34 Self-nomination is permissible only if the members are afforded additional methods whereby they may nominate the candidates of their...

An accurate and efficient reliability-based design optimization using the second order reliability method and improved stability transformation method

Science.gov (United States)

Meng, Zeng; Yang, Dixiong; Zhou, Huanlin; Yu, Bo

2018-05-01

The first order reliability method has been extensively adopted for reliability-based design optimization (RBDO), but it shows inaccuracy in calculating the failure probability with highly nonlinear performance functions. Thus, the second order reliability method is required to evaluate the reliability accurately. However, its application for RBDO is quite challenge owing to the expensive computational cost incurred by the repeated reliability evaluation and Hessian calculation of probabilistic constraints. In this article, a new improved stability transformation method is proposed to search the most probable point efficiently, and the Hessian matrix is calculated by the symmetric rank-one update. The computational capability of the proposed method is illustrated and compared to the existing RBDO approaches through three mathematical and two engineering examples. The comparison results indicate that the proposed method is very efficient and accurate, providing an alternative tool for RBDO of engineering structures.

Training less-experienced faculty improves reliability of skills assessment in cardiac surgery.

Science.gov (United States)

Lou, Xiaoying; Lee, Richard; Feins, Richard H; Enter, Daniel; Hicks, George L; Verrier, Edward D; Fann, James I

2014-12-01

Previous work has demonstrated high inter-rater reliability in the objective assessment of simulated anastomoses among experienced educators. We evaluated the inter-rater reliability of less-experienced educators and the impact of focused training with a video-embedded coronary anastomosis assessment tool. Nine less-experienced cardiothoracic surgery faculty members from different institutions evaluated 2 videos of simulated coronary anastomoses (1 by a medical student and 1 by a resident) at the Thoracic Surgery Directors Association Boot Camp. They then underwent a 30-minute training session using an assessment tool with embedded videos to anchor rating scores for 10 components of coronary artery anastomosis. Afterward, they evaluated 2 videos of a different student and resident performing the task. Components were scored on a 1 to 5 Likert scale, yielding an average composite score. Inter-rater reliabilities of component and composite scores were assessed using intraclass correlation coefficients (ICCs) and overall pass/fail ratings with kappa. All components of the assessment tool exhibited improvement in reliability, with 4 (bite, needle holder use, needle angles, and hand mechanics) improving the most from poor (ICC range, 0.09-0.48) to strong (ICC range, 0.80-0.90) agreement. After training, inter-rater reliabilities for composite scores improved from moderate (ICC, 0.76) to strong (ICC, 0.90) agreement, and for overall pass/fail ratings, from poor (kappa = 0.20) to moderate (kappa = 0.78) agreement. Focused, video-based anchor training facilitates greater inter-rater reliability in the objective assessment of simulated coronary anastomoses. Among raters with less teaching experience, such training may be needed before objective evaluation of technical skills. Published by Elsevier Inc.

Reliability improvements on Thales RM2 rotary Stirling coolers: analysis and methodology

Science.gov (United States)

Cauquil, J. M.; Seguineau, C.; Martin, J.-Y.; Benschop, T.

2016-05-01

The cooled IR detectors are used in a wide range of applications. Most of the time, the cryocoolers are one of the components dimensioning the lifetime of the system. The cooler reliability is thus one of its most important parameters. This parameter has to increase to answer market needs. To do this, the data for identifying the weakest element determining cooler reliability has to be collected. Yet, data collection based on field are hardly usable due to lack of informations. A method for identifying the improvement in reliability has then to be set up which can be used even without field return. This paper will describe the method followed by Thales Cryogénie SAS to reach such a result. First, a database was built from extensive expertizes of RM2 failures occurring in accelerate ageing. Failure modes have then been identified and corrective actions achieved. Besides this, a hierarchical organization of the functions of the cooler has been done with regard to the potential increase of its efficiency. Specific changes have been introduced on the functions most likely to impact efficiency. The link between efficiency and reliability will be described in this paper. The work on the two axes - weak spots for cooler reliability and efficiency - permitted us to increase in a drastic way the MTTF of the RM2 cooler. Huge improvements in RM2 reliability are actually proven by both field return and reliability monitoring. These figures will be discussed in the paper.

Nominal Group as Qualifier to "Someone"

Science.gov (United States)

Sujatna, Eva Tuckyta Sari; Wahyuni, Sri

2017-01-01

The paper titled "Nominal Group as Qualifier to 'Someone'" investigated types of qualifiers which are embedded to the head "someone" in a nominal group. This research was conducted in the light of Systemic Functional Linguistics analysis. The data was analyzed, classified then described using descriptive qualitative method.…

Petition nominations for 1990-1992

Science.gov (United States)

The nominees listed below are those of the Union and section nominating committees and have been approved by the AGU Council.Nominations may also be made by membership petition. There are no age, nationality, residence or other analogous restrictions on who may serve as a n officer. Petitions should be sent to the General Secretary, AGU, 2000 Florida Avenue N.W., Washington, DC 20009. They must be received no later than July 7, 1989.

Solid Rocket Booster Large Main and Drogue Parachute Reliability Analysis

Science.gov (United States)

Clifford, Courtenay B.; Hengel, John E.

2009-01-01

The parachutes on the Space Transportation System (STS) Solid Rocket Booster (SRB) are the means for decelerating the SRB and allowing it to impact the water at a nominal vertical velocity of 75 feet per second. Each SRB has one pilot, one drogue, and three main parachutes. About four minutes after SRB separation, the SRB nose cap is jettisoned, deploying the pilot parachute. The pilot chute then deploys the drogue parachute. The drogue chute provides initial deceleration and proper SRB orientation prior to frustum separation. At frustum separation, the drogue pulls the frustum from the SRB and allows the main parachutes that are mounted in the frustum to unpack and inflate. These chutes are retrieved, inspected, cleaned, repaired as needed, and returned to the flight inventory and reused. Over the course of the Shuttle Program, several improvements have been introduced to the SRB main parachutes. A major change was the replacement of the small (115 ft. diameter) main parachutes with the larger (136 ft. diameter) main parachutes. Other modifications were made to the main parachutes, main parachute support structure, and SRB frustum to eliminate failure mechanisms, improve damage tolerance, and improve deployment and inflation characteristics. This reliability analysis is limited to the examination of the SRB Large Main Parachute (LMP) and drogue parachute failure history to assess the reliability of these chutes. From the inventory analysis, 68 Large Main Parachutes were used in 651 deployments, and 7 chute failures occurred in the 651 deployments. Logistic regression was used to analyze the LMP failure history, and it showed that reliability growth has occurred over the period of use resulting in a current chute reliability of R = .9983. This result was then used to determine the reliability of the 3 LMPs on the SRB, when all must function. There are 29 drogue parachutes that were used in 244 deployments, and no in-flight failures have occurred. Since there are no

Improved Reliability-Based Optimization with Support Vector Machines and Its Application in Aircraft Wing Design

Directory of Open Access Journals (Sweden)

Yu Wang

2015-01-01

Full Text Available A new reliability-based design optimization (RBDO method based on support vector machines (SVM and the Most Probable Point (MPP is proposed in this work. SVM is used to create a surrogate model of the limit-state function at the MPP with the gradient information in the reliability analysis. This guarantees that the surrogate model not only passes through the MPP but also is tangent to the limit-state function at the MPP. Then, importance sampling (IS is used to calculate the probability of failure based on the surrogate model. This treatment significantly improves the accuracy of reliability analysis. For RBDO, the Sequential Optimization and Reliability Assessment (SORA is employed as well, which decouples deterministic optimization from the reliability analysis. The improved SVM-based reliability analysis is used to amend the error from linear approximation for limit-state function in SORA. A mathematical example and a simplified aircraft wing design demonstrate that the improved SVM-based reliability analysis is more accurate than FORM and needs less training points than the Monte Carlo simulation and that the proposed optimization strategy is efficient.

Improving QST Reliability – More Raters, Tests or Occasions? A Multivariate Generalizability Study

DEFF Research Database (Denmark)

O'Neill, Søren; O'Neill, Lotte

2015-01-01

The reliability of quantitative sensory testing (QST) is affected by the error attributable to both test occasion and rater (examiner) as well as interactions between them. Most reliability studies only account for one source of error. The present study employed a fully-crossed, multivariate...... threshold, intensity, tolerance and modulation with mechanical, thermal and chemical stimuli. The classical test-retest and inter-rater reliability (0.19... procedures. Reliability was improved more by repeated testing on separate occasions opposed to repeated testing by different raters....

Reliability improvement methods for sapphire fiber temperature sensors

Science.gov (United States)

Schietinger, C.; Adams, B.

1991-08-01

Mechanical, optical, electrical, and software design improvements can be brought to bear in the enhancement of fiber-optic sapphire-fiber temperature measurement tool reliability in harsh environments. The optical fiber thermometry (OFT) equipment discussed is used in numerous process industries and generally involves a sapphire sensor, an optical transmission cable, and a microprocessor-based signal analyzer. OFT technology incorporating sensors for corrosive environments, hybrid sensors, and two-wavelength measurements, are discussed.

SLAC modulator system improvements and reliability results

International Nuclear Information System (INIS)

Donaldson, A.R.

1998-06-01

In 1995, an improvement project was completed on the 244 klystron modulators in the linear accelerator. The modulator system has been previously described. This article offers project details and their resulting effect on modulator and component reliability. Prior to the project, the authors had collected four operating cycles (1991 through 1995) of MTTF data. In this discussion, the '91 data will be excluded since the modulators operated at 60 Hz. The five periods following the '91 run were reviewed due to the common repetition rate at 120 Hz

36 CFR 73.7 - World Heritage nomination process.

Science.gov (United States)

2010-07-01

... inscribed as a World Heritage Site. (j) Who is notified when a U.S. property has been nominated to the World... INTERIOR WORLD HERITAGE CONVENTION § 73.7 World Heritage nomination process. (a) What is the U.S. World... Future U.S. World Heritage nominations) and requests that public and private sources recommend properties...

Reliability Evaluation and Improvement Approach of Chemical Production Man - Machine - Environment System

Science.gov (United States)

Miao, Yongchun; Kang, Rongxue; Chen, Xuefeng

2017-12-01

In recent years, with the gradual extension of reliability research, the study of production system reliability has become the hot topic in various industries. Man-machine-environment system is a complex system composed of human factors, machinery equipment and environment. The reliability of individual factor must be analyzed in order to gradually transit to the research of three-factor reliability. Meanwhile, the dynamic relationship among man-machine-environment should be considered to establish an effective blurry evaluation mechanism to truly and effectively analyze the reliability of such systems. In this paper, based on the system engineering, fuzzy theory, reliability theory, human error, environmental impact and machinery equipment failure theory, the reliabilities of human factor, machinery equipment and environment of some chemical production system were studied by the method of fuzzy evaluation. At last, the reliability of man-machine-environment system was calculated to obtain the weighted result, which indicated that the reliability value of this chemical production system was 86.29. Through the given evaluation domain it can be seen that the reliability of man-machine-environment integrated system is in a good status, and the effective measures for further improvement were proposed according to the fuzzy calculation results.

An Approach to the Nominal Predicates in English and Romanian

Directory of Open Access Journals (Sweden)

Nicoleta Florina Mincă

2017-06-01

Full Text Available The paper is meant to be an approach to the use of nominal predicates in English and Romanian. In English there are two kinds of nominal predicates: the nominal predicate proper, concerned with the state or quality of the subject, and the double/complex predicate, which is a rather widespread form in English. In Romanian nominal predicates can be split into two categories: the proper nominal predicate, made up of a predicative and the copula “a fi” and the verbal nominal predicate, made up of a predicative and a lexical and grammatical copula. The predicative achievement within the nominal predicate structure is often similar to the subject achievement.

Improvement of Equipment reliability for Auxiliary Feed Water System

Energy Technology Data Exchange (ETDEWEB)

Deok, Lee Sang; Kwan, Lee Yong [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2013-10-15

According to AP913 ER) of INPO, Number of the event related to equipment is higher than others like external or human performance. In the top 25 systems, Auxiliary feed water system is the seventh highest among systems. AWFS consists of many component and complex system and Main Function of AFWS is to supply feedwater to the steam generators for the removal of heat from the RCS(Reactor Coolant System) in event the main feedwater system is unavailable following a transient or accident. Reliability of component means how well operate on demands and monitoring is necessary to keep track of condition of component. If component performance is lower than the required value, corrective action for failure mode should be done. The objective of this study is focused to improve of AF pump by adding the tasks of SHR(System Health Report) into the task of system engineer walkdown of PMT(Preventive Maintenance Template). Increasing the reliability of AF pump will contribute to improvement of reliability of AFWS. Based on operating history, there was high vibration of AF pump during performance test. In that case, there were a lot of maintenance works for normal operation of AF pump. Vibration problem related pump can't be detected by tasks of SE walkdown because it's not running during normal operation except for surveillance test. CHR(Component Health Report) of AF pump in AFWS can be made from necessary part which means monitoring and functional failure because problem of Stand-by pump can be covered by conducting monitoring and analysis of functional failure. To improve reliability of AF pump, walkdown of PMT and SHR should be conducted both in accordance with surveillance test frequency. Health of AF pump based on operation history can be verified first and then can find out which parts of pump are weak. Finally, weak part can be managed intensively and failure can be reduced according to SE walkdown. But this work can be risky and burdensome because all parts of

Reliability improvement in GaN HEMT power device using a field plate approach

Science.gov (United States)

Wu, Wen-Hao; Lin, Yueh-Chin; Chin, Ping-Chieh; Hsu, Chia-Chieh; Lee, Jin-Hwa; Liu, Shih-Chien; Maa, Jer-shen; Iwai, Hiroshi; Chang, Edward Yi; Hsu, Heng-Tung

2017-07-01

This study investigates the effect of implementing a field plate on a GaN high-electron-mobility transistor (HEMT) to improve power device reliability. The results indicate that the field plate structure reduces the peak electrical field and interface traps in the device, resulting in higher breakdown voltage, lower leakage current, smaller current collapse, and better threshold voltage control. Furthermore, after high voltage stress, steady dynamic on-resistance and gate capacitance degradation improvement were observed for the device with the field plate. This demonstrates that GaN device reliability can be improved by using the field plate approach.

Developing a system engineering program to improve performance and reliability

International Nuclear Information System (INIS)

Keuter, D.

1985-01-01

After several maintenance, operational, and equipment problems last year, Trojan set out on a mission to improve plant performance and reliability by strengthening its on-site engineering organization. This paper presents Trojan's plans in developing an on-site system engineering organization

Precision of lumbar intervertebral measurements: does a computer-assisted technique improve reliability?

Science.gov (United States)

Pearson, Adam M; Spratt, Kevin F; Genuario, James; McGough, William; Kosman, Katherine; Lurie, Jon; Sengupta, Dilip K

2011-04-01

Comparison of intra- and interobserver reliability of digitized manual and computer-assisted intervertebral motion measurements and classification of "instability." To determine if computer-assisted measurement of lumbar intervertebral motion on flexion-extension radiographs improves reliability compared with digitized manual measurements. Many studies have questioned the reliability of manual intervertebral measurements, although few have compared the reliability of computer-assisted and manual measurements on lumbar flexion-extension radiographs. Intervertebral rotation, anterior-posterior (AP) translation, and change in anterior and posterior disc height were measured with a digitized manual technique by three physicians and by three other observers using computer-assisted quantitative motion analysis (QMA) software. Each observer measured 30 sets of digital flexion-extension radiographs (L1-S1) twice. Shrout-Fleiss intraclass correlation coefficients for intra- and interobserver reliabilities were computed. The stability of each level was also classified (instability defined as >4 mm AP translation or 10° rotation), and the intra- and interobserver reliabilities of the two methods were compared using adjusted percent agreement (APA). Intraobserver reliability intraclass correlation coefficients were substantially higher for the QMA technique THAN the digitized manual technique across all measurements: rotation 0.997 versus 0.870, AP translation 0.959 versus 0.557, change in anterior disc height 0.962 versus 0.770, and change in posterior disc height 0.951 versus 0.283. The same pattern was observed for interobserver reliability (rotation 0.962 vs. 0.693, AP translation 0.862 vs. 0.151, change in anterior disc height 0.862 vs. 0.373, and change in posterior disc height 0.730 vs. 0.300). The QMA technique was also more reliable for the classification of "instability." Intraobserver APAs ranged from 87 to 97% for QMA versus 60% to 73% for digitized manual

Derating design for optimizing reliability and cost with an application to liquid rocket engines

International Nuclear Information System (INIS)

Kim, Kyungmee O.; Roh, Taeseong; Lee, Jae-Woo; Zuo, Ming J.

2016-01-01

Derating is the operation of an item at a stress that is lower than its rated design value. Previous research has indicated that reliability can be increased from operational derating. In order to derate an item in field operation, however, an engineer must rate the design of the item at a stress level higher than the operational stress level, which increases the item's nominal failure rate and development costs. At present, there is no model available to quantify the cost and reliability that considers the design uprating as well as the operational derating. In this paper, we establish the reliability expression in terms of the derating level assuming that the nominal failure rate is constant with time for a fixed rated design value. The total development cost is expressed in terms of the rated design value and the number of tests necessary to demonstrate the reliability requirement. The properties of the optimal derating level are explained for maximizing the reliability or for minimizing the cost. As an example, the proposed model is applied to the design of liquid rocket engines. - Highlights: • Modeled the effect of derating design on the reliability and the development cost. • Discovered that derating design may reduce the cost of reliability demonstration test. • Optimized the derating design parameter for reliability maximization or cost minimization.

Grant Peer Review: Improving Inter-Rater Reliability with Training.

Science.gov (United States)

Sattler, David N; McKnight, Patrick E; Naney, Linda; Mathis, Randy

2015-01-01

This study developed and evaluated a brief training program for grant reviewers that aimed to increase inter-rater reliability, rating scale knowledge, and effort to read the grant review criteria. Enhancing reviewer training may improve the reliability and accuracy of research grant proposal scoring and funding recommendations. Seventy-five Public Health professors from U.S. research universities watched the training video we produced and assigned scores to the National Institutes of Health scoring criteria proposal summary descriptions. For both novice and experienced reviewers, the training video increased scoring accuracy (the percentage of scores that reflect the true rating scale values), inter-rater reliability, and the amount of time reading the review criteria compared to the no video condition. The increase in reliability for experienced reviewers is notable because it is commonly assumed that reviewers--especially those with experience--have good understanding of the grant review rating scale. The findings suggest that both experienced and novice reviewers who had not received the type of training developed in this study may not have appropriate understanding of the definitions and meaning for each value of the rating scale and that experienced reviewers may overestimate their knowledge of the rating scale. The results underscore the benefits of and need for specialized peer reviewer training.

The architecture of a reliable software monitoring system for embedded software systems

International Nuclear Information System (INIS)

Munson, J.; Krings, A.; Hiromoto, R.

2006-01-01

We develop the notion of a measurement-based methodology for embedded software systems to ensure properties of reliability, survivability and security, not only under benign faults but under malicious and hazardous conditions as well. The driving force is the need to develop a dynamic run-time monitoring system for use in these embedded mission critical systems. These systems must run reliably, must be secure and they must fail gracefully. That is, they must continue operating in the face of the departures from their nominal operating scenarios, the failure of one or more system components due to normal hardware and software faults, as well as malicious acts. To insure the integrity of embedded software systems, the activity of these systems must be monitored as they operate. For each of these systems, it is possible to establish a very succinct representation of nominal system activity. Furthermore, it is possible to detect departures from the nominal operating scenario in a timely fashion. Such departure may be due to various circumstances, e.g., an assault from an outside agent, thus forcing the system to operate in an off-nominal environment for which it was neither tested nor certified, or a hardware/software component that has ceased to operate in a nominal fashion. A well-designed system will have the property of graceful degradation. It must continue to run even though some of the functionality may have been lost. This involves the intelligent re-mapping of system functions. Those functions that are impacted by the failure of a system component must be identified and isolated. Thus, a system must be designed so that its basic operations may be re-mapped onto system components still operational. That is, the mission objectives of the software must be reassessed in terms of the current operational capabilities of the software system. By integrating the mechanisms to support observation and detection directly into the design methodology, we propose to shift

Candidate nomination, intra-party democracy, and election violence in Africa

DEFF Research Database (Denmark)

Seeberg, Merete Bech; Wahman, Michael; Skaaning, Svend-Erik

2018-01-01

This article introduces a special issue on candidate nomination, intra-party democracy, and election violence in Africa. Although a burgeoning literature on African democratization has focused on the topic of electoral violence, little attention has been given to violence during party nominations...... of the involvement of electoral management bodies and external monitors, and violence often results. Rather than developing an elaborate theoretical framework on the causes of nomination violence, our ambition in this introduction is to introduce the concept of nomination violence and situate it in the literatures...... on intra-party democracy and election violence. We also offer new descriptive data on nomination rules and nomination violence across parties on the African continent. The data show that nomination violence is a prevalent problem across both democracies and electoral autocracies. However, the level...

Piping reliability improvement through passive seismic supports

International Nuclear Information System (INIS)

Baltus, R.; Rubbers, A.

1999-01-01

The nuclear plants designed in the 1970's were equipped with large quantities of snubbers in auxiliary piping systems. The experience revealed a poor performance of snubbers during periodic inspection, while non-nuclear facility piping survived through strong earthquakes. Consequently, seismic design rules evolved towards more realistic criteria and passive dynamic supports were developed to reduce snubber quantities. These solutions improve the pipe reliability during normal operation while reducing the radiation exposure in a sample line is presented with the impact on pipe stresses compared to the results obtained with passive supports named Limit Stops. (author)

Approaching nominal longitudinal parameters with a single LHC batch in the SPS

CERN Document Server

Baudrenghien, P; Linnecar, Trevor Paul R; Shaposhnikova, Elena; Tückmantel, Joachim; CERN. Geneva. SPS and LHC Division

2002-01-01

Progress made in obtaining the nominal LHC parameters during the first three MDs in 2002 is described. At the end of the third MD nominal longitudinal parameters (bunch length 1.75 ns and emittance 0.46 eVs) were obtained for a single batch with an intensity of 6.7 x 1012 at 450 GeV as a result of improvements in the feedback and feedforward systems made in the second MD and special settings, which include an optimised 200 MHz voltage programme, operation of the 800 MHz RF system through the cycle together with a small controlled emittance blow-up on the flat bottom.

Improving the Test-Retest Reliability of Resting State fMRI by Removing the Impact of Sleep.

Science.gov (United States)

Wang, Jiahui; Han, Junwei; Nguyen, Vinh T; Guo, Lei; Guo, Christine C

2017-01-01

Resting state functional magnetic resonance imaging (rs-fMRI) provides a powerful tool to examine large-scale neural networks in the human brain and their disturbances in neuropsychiatric disorders. Thanks to its low demand and high tolerance, resting state paradigms can be easily acquired from clinical population. However, due to the unconstrained nature, resting state paradigm is associated with excessive head movement and proneness to sleep. Consequently, the test-retest reliability of rs-fMRI measures is moderate at best, falling short of widespread use in the clinic. Here, we characterized the effect of sleep on the test-retest reliability of rs-fMRI. Using measures of heart rate variability (HRV) derived from simultaneous electrocardiogram (ECG) recording, we identified portions of fMRI data when subjects were more alert or sleepy, and examined their effects on the test-retest reliability of functional connectivity measures. When volumes of sleep were excluded, the reliability of rs-fMRI is significantly improved, and the improvement appears to be general across brain networks. The amount of improvement is robust with the removal of as much as 60% volumes of sleepiness. Therefore, test-retest reliability of rs-fMRI is affected by sleep and could be improved by excluding volumes of sleepiness as indexed by HRV. Our results suggest a novel and practical method to improve test-retest reliability of rs-fMRI measures.

STOCK PRICES, 1900-1995: THE REAL AND NOMINAL STORY

Directory of Open Access Journals (Sweden)

Kenneth Weiher

2000-01-01

Full Text Available Prompted by the inflation-adjusted Dow Jones Industrials Average setting its first record high in almost thirty years in 1995, this paper studies the impact of inflation on nominal and real stock prices from a theoretical, historical, and empirical perspective. While stocks are an excellent longterm hedge against inflation, nominal stock prices stagnate and real stock prices fall during a period of rapid inflation. Both nominal and real stockprices then go through a catch-up phase during the subsequent disinflation period. The history for this century is consistent with this pattern. Regression analysis between real and nominal stock prices as the dependent variables and inflation as the independent variable shows statistically significant evidence that (a nominal stock returns are positively related to inflation while real stock returns are not; and (b both nominal and real stock returns are negatively related to accelerations of inflation and positively related to decelerations.

Zero tolerance for failure. An AREVA initiative to improve reliability

International Nuclear Information System (INIS)

Lippert, Hans-Joachim; Gentet, Guy; Mollard, Pierre; Garner, Norman

2010-01-01

Significant improvements in fuel reliability have been realized over the past 2 decades, but total elimination of failures has remained elusive. Driving reliability to higher levels requires a philosophy that does not accept that even infrequent and isolated failures are inevitable - it was on this foundation that Areva's Zero Tolerance for Failure (ZTF) initiative was established. This is not in itself either a program or project, but a fundamental shift in the way of thinking about work according to the following four principles: - Failures are avoidable, - Zero failures are our goal, - We will respond rapidly to any failure, - We succeed when we fix failures in a way that precludes recurrence. The shift to a ZTF philosophy is a broad change in corporate culture that expands the concept of failure far beyond cases where fuel rod cladding integrity is breached. While this paper specifically illustrates the ways in which ZTF has shaped the company's response to enhancing fuel rod reliability, ZTF extends to any failures of fuel products to deliver expected levels of performance, manufacturing processes to meet specifications and high first-pass acceptance criteria, and beyond to error-free performance of engineering analyses and cycle design and licensing services. Application of ZTF to enhancing fuel reliability deploys efforts in the areas of manufacturing, human factors, design, R and D, processes and product strategy. In order to achieve the necessary improvements, a number of important actions have been initiated across regions and facilities. In addition to these global scale projects and measures, each region contributes by adopting measures which are relevant to its particular activities and market needs. (orig.)

Improving Metrological Reliability of Information-Measuring Systems Using Mathematical Modeling of Their Metrological Characteristics

Science.gov (United States)

Kurnosov, R. Yu; Chernyshova, T. I.; Chernyshov, V. N.

2018-05-01

The algorithms for improving the metrological reliability of analogue blocks of measuring channels and information-measuring systems are developed. The proposed algorithms ensure the optimum values of their metrological reliability indices for a given analogue circuit block solution.

Device Performance and Reliability Improvements of AlGaBN/GaN/Si MOSFET

Science.gov (United States)

2016-02-04

AFRL-AFOSR-JP-TR-2016-0037 Device Performance and Reliablity Improvements of AlGaBN/GaN/Si MOSFET Robert Wallace UNIVERSITY OF TEXAS AT DALLAS Final...GaN/Si MOSFET 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA2386-14-1-4069 5c.  PROGRAM ELEMENT NUMBER 61102F 6. AUTHOR(S) Robert Wallace 5d.  PROJECT...AOARD Grant FA2386-14-1-4069 Device Performance and Reliability Improvements of AlGaN/GaN/Si MOSFET US 12 month extension (2014 – 2015) for current

The source of real and nominal exchange rate fluctuations in Thailand: Real shock or nominal shock

OpenAIRE

Le Thanh, Binh

2015-01-01

This paper examines the source of exchange rate fluctuations in Thailand. We employed a structural vector auto-regression (SVAR) model with the long-run neutrality restriction of Blanchard and Quah (1989) to investigate the changes in real and nominal exchange rates from 1994 to 2015. In this paper, we assume that there are two types of shocks which related to exchange rate movements: real shocks and nominal shocks. The empirical analysis indicates that real shocks are the fundamental compon...

Geological nominations at UNESCO World Heritage, an upstream struggle

Science.gov (United States)

Olive-Garcia, Cécile; van Wyk de Vries, Benjamin

2017-04-01

Using my 10 years experience in setting up and defending a UNESCO world Heritage Geological nomination, this presentation aims to give a personal insight into this international process and the differential use of science, subjective perception (aesthetic and 'naturality'), and politics. At this point in the process, new protocols have been tested in order to improve the dialogue, accountability and transparency between the different stake-holders. These are, the State parties, the IUCN, the scientific community, and UNESCO itself. Our proposal is the Chaîne des Puys-Limagne fault ensemble, which combines tectonic, geomorphological evolution and volcanology. The project's essence is a conjunction of inseparable geological features and processes, set in the context of plate tectonics. This very unicit yof diverse forms and processes creates the value of the site. However, it is just this that has caused a problem, as the advisory body has a categorical approach of nominations that separates items to assess them in an unconnected manner.From the start we proposed a combined approach, where a property is seen in its entirety, and the constituent elements seen as interlinked elements reflecting the joint underlying phenomena. At this point, our project has received the first ever open review by an independent technical mission (jointly set up by IUCN, UNESCO and the State party). The subsequent report was broadly supportive of the project's approach and of the value of the ensemble of features. The UNESCO committee in 2016, re-referred the nomination, acknowledging the potential Outstanding Universal Value of the site and requesting the parties to continue the upstream process (e.g. collaborative work), notably on the recommendations and conclusions of the Independent Technical mission report. Meetings are continuing, and I shall provide you with the hot-off-the-press news as this ground breaking nomination progresses.

A redundancy-removing feature selection algorithm for nominal data

Directory of Open Access Journals (Sweden)

Zhihua Li

2015-10-01

Full Text Available No order correlation or similarity metric exists in nominal data, and there will always be more redundancy in a nominal dataset, which means that an efficient mutual information-based nominal-data feature selection method is relatively difficult to find. In this paper, a nominal-data feature selection method based on mutual information without data transformation, called the redundancy-removing more relevance less redundancy algorithm, is proposed. By forming several new information-related definitions and the corresponding computational methods, the proposed method can compute the information-related amount of nominal data directly. Furthermore, by creating a new evaluation function that considers both the relevance and the redundancy globally, the new feature selection method can evaluate the importance of each nominal-data feature. Although the presented feature selection method takes commonly used MIFS-like forms, it is capable of handling high-dimensional datasets without expensive computations. We perform extensive experimental comparisons of the proposed algorithm and other methods using three benchmarking nominal datasets with two different classifiers. The experimental results demonstrate the average advantage of the presented algorithm over the well-known NMIFS algorithm in terms of the feature selection and classification accuracy, which indicates that the proposed method has a promising performance.

24 CFR 597.202 - Submission of nominations for designation.

Science.gov (United States)

2010-04-01

... nominated urban area satisfies the poverty rate tests set forth in § 597.103; (4) The nominated urban area... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Submission of nominations for designation. 597.202 Section 597.202 Housing and Urban Development Regulations Relating to Housing and Urban...

Improving the Test-Retest Reliability of Resting State fMRI by Removing the Impact of Sleep

Directory of Open Access Journals (Sweden)

Jiahui Wang

2017-05-01

Full Text Available Resting state functional magnetic resonance imaging (rs-fMRI provides a powerful tool to examine large-scale neural networks in the human brain and their disturbances in neuropsychiatric disorders. Thanks to its low demand and high tolerance, resting state paradigms can be easily acquired from clinical population. However, due to the unconstrained nature, resting state paradigm is associated with excessive head movement and proneness to sleep. Consequently, the test-retest reliability of rs-fMRI measures is moderate at best, falling short of widespread use in the clinic. Here, we characterized the effect of sleep on the test-retest reliability of rs-fMRI. Using measures of heart rate variability (HRV derived from simultaneous electrocardiogram (ECG recording, we identified portions of fMRI data when subjects were more alert or sleepy, and examined their effects on the test-retest reliability of functional connectivity measures. When volumes of sleep were excluded, the reliability of rs-fMRI is significantly improved, and the improvement appears to be general across brain networks. The amount of improvement is robust with the removal of as much as 60% volumes of sleepiness. Therefore, test-retest reliability of rs-fMRI is affected by sleep and could be improved by excluding volumes of sleepiness as indexed by HRV. Our results suggest a novel and practical method to improve test-retest reliability of rs-fMRI measures.

Improved radiograph measurement inter-observer reliability by use of statistical shape models

Energy Technology Data Exchange (ETDEWEB)

Pegg, E.C., E-mail: elise.pegg@ndorms.ox.ac.uk [University of Oxford, Nuffield Department of Orthopaedics, Rheumatology and Musculoskeletal Sciences, Nuffield Orthopaedic Centre, Windmill Road, Oxford OX3 7LD (United Kingdom); Mellon, S.J., E-mail: stephen.mellon@ndorms.ox.ac.uk [University of Oxford, Nuffield Department of Orthopaedics, Rheumatology and Musculoskeletal Sciences, Nuffield Orthopaedic Centre, Windmill Road, Oxford OX3 7LD (United Kingdom); Salmon, G. [University of Oxford, Nuffield Department of Orthopaedics, Rheumatology and Musculoskeletal Sciences, Nuffield Orthopaedic Centre, Windmill Road, Oxford OX3 7LD (United Kingdom); Alvand, A., E-mail: abtin.alvand@ndorms.ox.ac.uk [University of Oxford, Nuffield Department of Orthopaedics, Rheumatology and Musculoskeletal Sciences, Nuffield Orthopaedic Centre, Windmill Road, Oxford OX3 7LD (United Kingdom); Pandit, H., E-mail: hemant.pandit@ndorms.ox.ac.uk [University of Oxford, Nuffield Department of Orthopaedics, Rheumatology and Musculoskeletal Sciences, Nuffield Orthopaedic Centre, Windmill Road, Oxford OX3 7LD (United Kingdom); Murray, D.W., E-mail: david.murray@ndorms.ox.ac.uk [University of Oxford, Nuffield Department of Orthopaedics, Rheumatology and Musculoskeletal Sciences, Nuffield Orthopaedic Centre, Windmill Road, Oxford OX3 7LD (United Kingdom); Gill, H.S., E-mail: richie.gill@ndorms.ox.ac.uk [University of Oxford, Nuffield Department of Orthopaedics, Rheumatology and Musculoskeletal Sciences, Nuffield Orthopaedic Centre, Windmill Road, Oxford OX3 7LD (United Kingdom)

2012-10-15

Pre- and post-operative radiographs of patients undergoing joint arthroplasty are often examined for a variety of purposes including preoperative planning and patient assessment. This work examines the feasibility of using active shape models (ASM) to semi-automate measurements from post-operative radiographs for the specific case of the Oxford™ Unicompartmental Knee. Measurements of the proximal tibia and the position of the tibial tray were made using the ASM model and manually. Data were obtained by four observers and one observer took four sets of measurements to allow assessment of the inter- and intra-observer reliability, respectively. The parameters measured were the tibial tray angle, the tray overhang, the tray size, the sagittal cut position, the resection level and the tibial width. Results demonstrated improved reliability (average of 27% and 11.2% increase for intra- and inter-reliability, respectively) and equivalent accuracy (p > 0.05 for compared data values) for all of the measurements using the ASM model, with the exception of the tray overhang (p = 0.0001). Less time (15 s) was required to take measurements using the ASM model compared with manual measurements, which was significant. These encouraging results indicate that semi-automated measurement techniques could improve the reliability of radiographic measurements.

Improved radiograph measurement inter-observer reliability by use of statistical shape models

International Nuclear Information System (INIS)

Pegg, E.C.; Mellon, S.J.; Salmon, G.; Alvand, A.; Pandit, H.; Murray, D.W.; Gill, H.S.

2012-01-01

Pre- and post-operative radiographs of patients undergoing joint arthroplasty are often examined for a variety of purposes including preoperative planning and patient assessment. This work examines the feasibility of using active shape models (ASM) to semi-automate measurements from post-operative radiographs for the specific case of the Oxford™ Unicompartmental Knee. Measurements of the proximal tibia and the position of the tibial tray were made using the ASM model and manually. Data were obtained by four observers and one observer took four sets of measurements to allow assessment of the inter- and intra-observer reliability, respectively. The parameters measured were the tibial tray angle, the tray overhang, the tray size, the sagittal cut position, the resection level and the tibial width. Results demonstrated improved reliability (average of 27% and 11.2% increase for intra- and inter-reliability, respectively) and equivalent accuracy (p > 0.05 for compared data values) for all of the measurements using the ASM model, with the exception of the tray overhang (p = 0.0001). Less time (15 s) was required to take measurements using the ASM model compared with manual measurements, which was significant. These encouraging results indicate that semi-automated measurement techniques could improve the reliability of radiographic measurements

Nominalized clauses, clausal arguments and agreement

OpenAIRE

Picallo, M. Carme

2001-01-01

Strict minimalist assumptions require adopting the hypothesis that argument clauses and nominalized clauses are assigned Phi features. The data examined suggest that the interpretable Phi content of these arguments is specified as [-P, -N, -G]. We conclude that all arguments (of the clausal or of the nominal types) are subject to the operation Agree with a functional category. All arguments behave alike as far as abstract computational operations is concerned. The computational component is b...

Embedded Sensors and Controls to Improve Component Performance and Reliability Conceptual Design Report

Energy Technology Data Exchange (ETDEWEB)

Kisner, R.; Melin, A.; Burress, T.; Fugate, D.; Holcomb, D.; Wilgen, J.; Miller, J.; Wilson, D.; Silva, P.; Whitlow, L.; Peretz, F.

2012-09-15

The objective of this project is to demonstrate improved reliability and increased performance made possible by deeply embedding instrumentation and controls (I&C) in nuclear power plant (NPP) components and systems. The project is employing a highly instrumented canned rotor, magnetic bearing, fluoride salt pump as its I&C technology demonstration platform. I&C is intimately part of the basic millisecond-by-millisecond functioning of the system; treating I&C as an integral part of the system design is innovative and will allow significant improvement in capabilities and performance. As systems become more complex and greater performance is required, traditional I&C design techniques become inadequate and more advanced I&C needs to be applied. New I&C techniques enable optimal and reliable performance and tolerance of noise and uncertainties in the system rather than merely monitoring quasistable performance. Traditionally, I&C has been incorporated in NPP components after the design is nearly complete; adequate performance was obtained through over-design. By incorporating I&C at the beginning of the design phase, the control system can provide superior performance and reliability and enable designs that are otherwise impossible. This report describes the progress and status of the project and provides a conceptual design overview for the platform to demonstrate the performance and reliability improvements enabled by advanced embedded I&C.

Nominalizations in Spanish. Studies in Linguistics and Language Learning, Volume V.

Science.gov (United States)

Falk, Julia Sableski

Using methods developed in transformational generative grammar, three types of nominal constructions in Spanish are treated in this paper: Fact nominalizations ("[El] Escribir es agradable"), Manner nominalizations ("El tocar [de la mujer] es agradable"), and Abstract noun nominalizations ("La construccion rapida de esta escuela es dudosa"). While…

Reliability and construction control

Directory of Open Access Journals (Sweden)

Sherif S. AbdelSalam

2016-06-01

Full Text Available The goal of this study was to determine the most reliable and efficient combination of design and construction methods required for vibro piles. For a wide range of static and dynamic formulas, the reliability-based resistance factors were calculated using EGYPT database, which houses load test results for 318 piles. The analysis was extended to introduce a construction control factor that determines the variation between the pile nominal capacities calculated using static versus dynamic formulae. From the major outcomes, the lowest coefficient of variation is associated with Davisson’s criterion, and the resistance factors calculated for the AASHTO method are relatively high compared with other methods. Additionally, the CPT-Nottingham and Schmertmann method provided the most economic design. Recommendations related to a pile construction control factor were also presented, and it was found that utilizing the factor can significantly reduce variations between calculated and actual capacities.

Improvement of the reliability graph with general gates to analyze the reliability of dynamic systems that have various operation modes

Energy Technology Data Exchange (ETDEWEB)

Shin, Seung Ki [Div. of Research Reactor System Design, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); No, Young Gyu; Seong, Poong Hyun [Dept. of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2016-04-15

The safety of nuclear power plants is analyzed by a probabilistic risk assessment, and the fault tree analysis is the most widely used method for a risk assessment with the event tree analysis. One of the well-known disadvantages of the fault tree is that drawing a fault tree for a complex system is a very cumbersome task. Thus, several graphical modeling methods have been proposed for the convenient and intuitive modeling of complex systems. In this paper, the reliability graph with general gates (RGGG) method, one of the intuitive graphical modeling methods based on Bayesian networks, is improved for the reliability analyses of dynamic systems that have various operation modes with time. A reliability matrix is proposed and it is explained how to utilize the reliability matrix in the RGGG for various cases of operation mode changes. The proposed RGGG with a reliability matrix provides a convenient and intuitive modeling of various operation modes of complex systems, and can also be utilized with dynamic nodes that analyze the failure sequences of subcomponents. The combinatorial use of a reliability matrix with dynamic nodes is illustrated through an application to a shutdown cooling system in a nuclear power plant.

Improvement of the reliability graph with general gates to analyze the reliability of dynamic systems that have various operation modes

International Nuclear Information System (INIS)

Shin, Seung Ki; No, Young Gyu; Seong, Poong Hyun

2016-01-01

The safety of nuclear power plants is analyzed by a probabilistic risk assessment, and the fault tree analysis is the most widely used method for a risk assessment with the event tree analysis. One of the well-known disadvantages of the fault tree is that drawing a fault tree for a complex system is a very cumbersome task. Thus, several graphical modeling methods have been proposed for the convenient and intuitive modeling of complex systems. In this paper, the reliability graph with general gates (RGGG) method, one of the intuitive graphical modeling methods based on Bayesian networks, is improved for the reliability analyses of dynamic systems that have various operation modes with time. A reliability matrix is proposed and it is explained how to utilize the reliability matrix in the RGGG for various cases of operation mode changes. The proposed RGGG with a reliability matrix provides a convenient and intuitive modeling of various operation modes of complex systems, and can also be utilized with dynamic nodes that analyze the failure sequences of subcomponents. The combinatorial use of a reliability matrix with dynamic nodes is illustrated through an application to a shutdown cooling system in a nuclear power plant

Biaxial nominal state of stress at the crack front

International Nuclear Information System (INIS)

Dietmann, H.; Kussmaul, K.

1979-01-01

In fracture toughness testing with CT-specimens there is an unaxial nominal stress state caused by the nominal stress psub(y) perpendicular to the crack surface. This paper investigates the question whether the fracture toughness, or generally speaking, the fracture load, is influenced by additional nominal stresses psub(x) and psub(z) in the crack surface, i.e. by a multiaxial stress state. (orig.)

ANALYSIS OF POWER SYSTEM RELIABILITY IMPROVEMENT FOR 74-BUS RADIAL DISTRIBUTION SYSTEM

OpenAIRE

Su Mon Myint*

2018-01-01

In Myanmar, electric power system planning is widely constructed because of more and more load growth and facing with failure of electricity, outage problems and system shut-down. Thus, not only making new power system network but also improving reliability of the existing system using suitable methods is very important to provide an adequate supply of electrical energy to its customers as economically and reliably as possible with an acceptable degree of continuity and quality that is design...

Specialists' meeting on thermodynamics of FBR fuel subassemblies under nominal and non-nominal operating conditions. Summary report

Energy Technology Data Exchange (ETDEWEB)

1979-01-01

The purpose of the meeting was to provide a forum for exchange of information on thermo- and fluiddynamic investigations of LMFBR-subassembly. Special emphasis was placed on nominal and non-nominal conditions. The technical part of the meeting was divided into four sessions, as follows: status of the thermo- and fluiddynamic activities; physical and mathematical modelling of single phase; rod bundle thermohydraulics; experimental investigations; and future R and D. Separate abstracts are included for each of the papers.

The Reliability of In-Training Assessment when Performance Improvement Is Taken into Account

Science.gov (United States)

van Lohuizen, Mirjam T.; Kuks, Jan B. M.; van Hell, Elisabeth A.; Raat, A. N.; Stewart, Roy E.; Cohen-Schotanus, Janke

2010-01-01

During in-training assessment students are frequently assessed over a longer period of time and therefore it can be expected that their performance will improve. We studied whether there really is a measurable performance improvement when students are assessed over an extended period of time and how this improvement affects the reliability of the…

Monolithic QCL design approaches for improved reliability and affordability

Science.gov (United States)

Law, K. K.

2013-12-01

Many advances have been made recently in mid-wave infrared and long-wave infrared quantum cascade lasers (QCLs) technologies, and there is an increasing demand for these laser sources for ever expanding Naval, DoD and homeland security applications. We will discuss in this paper a portfolio of various Naval Air Warfare Weapons Division's current and future small business innovative research programs and efforts on significantly improving QCLs' performance, affordability, and reliability.

Technology Improvement for the High Reliability LM-2F Launch Vehicle

Institute of Scientific and Technical Information of China (English)

QIN Tong; RONG Yi; ZHENG Liwei; ZHANG Zhi

2017-01-01

The Long March 2F (LM-2F) launch vehicle,the only launch vehicle designed for manned space flight in China,successfully launched the Tiangong 2 space laboratory and the Shenzhou ll manned spaceship into orbits in 2016 respectively.In this study,it introduces the technological improvements for enhancing the reliability of the LM-2F launch vehicle in the aspects of general technology,control system,manufacture and ground support system.The LM2F launch vehicle will continue to provide more contributions to the Chinese Space Station Project with its high reliability and 100％ success rate.

The commissioning of CMS sites: Improving the site reliability

International Nuclear Information System (INIS)

Belforte, S; Fisk, I; Flix, J; Hernandez, J M; Klem, J; Letts, J; Magini, N; Saiz, P; Sciaba, A

2010-01-01

The computing system of the CMS experiment works using distributed resources from more than 60 computing centres worldwide. These centres, located in Europe, America and Asia are interconnected by the Worldwide LHC Computing Grid. The operation of the system requires a stable and reliable behaviour of the underlying infrastructure. CMS has established a procedure to extensively test all relevant aspects of a Grid site, such as the ability to efficiently use their network to transfer data, the functionality of all the site services relevant for CMS and the capability to sustain the various CMS computing workflows at the required scale. This contribution describes in detail the procedure to rate CMS sites depending on their performance, including the complete automation of the program, the description of monitoring tools, and its impact in improving the overall reliability of the Grid from the point of view of the CMS computing system.

77 FR 11119 - Request for Nominations of Children's Healthcare Quality Measures for Potential Inclusion in the...

Science.gov (United States)

2012-02-24

... Nominations of Children's Healthcare Quality Measures for Potential Inclusion in the CHIPRA 2013 Improved Core... quality for potential inclusion in the CHIPRA 2013 Improved Core Set of Health Care Quality Measures (the... inclusion, more information, including a copyright release (if applicable) and full measure specifications...

Cost/worth assessment of reliability improvement in distribution networks by means of artificial intelligence

Energy Technology Data Exchange (ETDEWEB)

Bouhouras, Aggelos S.; Labridis, Dimitris P.; Bakirtzis, Anastasios G. [Power Systems Laboratory, Aristotle University of Thessaloniki, Dept. of Electrical and Computer Engineering, 54124 Thessaloniki (Greece)

2010-06-15

A major challenge for the power utilities today is to ensure a high level of reliability of supply to customers. Two main factors determine the feasibility of a project that improves the reliability of supply: the project cost (investment and operational) and the benefits that result from the implementation of the project. This paper examines the implementation of an Artificial Intelligence System in an urban distribution network, capable to locate and isolate short circuit faults in the feeder, thus accomplishing immediate restoration of electric supply to the customers. The paper describes the benefits of the project, which are supply reliability improvement and distribution network loss reduction through network reconfigurations. By comparison of the project benefits and costs the economic feasibility of such a project for an underground distribution feeder in Greece is demonstrated. (author)

A Review: Passive System Reliability Analysis – Accomplishments and Unresolved Issues

Energy Technology Data Exchange (ETDEWEB)

Nayak, Arun Kumar, E-mail: arunths@barc.gov.in [Reactor Engineering Division, Reactor Design and Development Group, Bhabha Atomic Research Centre, Mumbai (India); Chandrakar, Amit [Homi Bhabha National Institute, Mumbai (India); Vinod, Gopika [Reactor Safety Division, Reactor Design and Development Group, Bhabha Atomic Research Centre, Mumbai (India)

2014-10-10

Reliability assessment of passive safety systems is one of the important issues, since safety of advanced nuclear reactors rely on several passive features. In this context, a few methodologies such as reliability evaluation of passive safety system (REPAS), reliability methods for passive safety functions (RMPS), and analysis of passive systems reliability (APSRA) have been developed in the past. These methodologies have been used to assess reliability of various passive safety systems. While these methodologies have certain features in common, but they differ in considering certain issues; for example, treatment of model uncertainties, deviation of geometric, and process parameters from their nominal values. This paper presents the state of the art on passive system reliability assessment methodologies, the accomplishments, and remaining issues. In this review, three critical issues pertaining to passive systems performance and reliability have been identified. The first issue is applicability of best estimate codes and model uncertainty. The best estimate codes based phenomenological simulations of natural convection passive systems could have significant amount of uncertainties, these uncertainties must be incorporated in appropriate manner in the performance and reliability analysis of such systems. The second issue is the treatment of dynamic failure characteristics of components of passive systems. REPAS, RMPS, and APSRA methodologies do not consider dynamic failures of components or process, which may have strong influence on the failure of passive systems. The influence of dynamic failure characteristics of components on system failure probability is presented with the help of a dynamic reliability methodology based on Monte Carlo simulation. The analysis of a benchmark problem of Hold-up tank shows the error in failure probability estimation by not considering the dynamism of components. It is thus suggested that dynamic reliability methodologies must be

Revised scoring and improved reliability for the Communication Patterns Questionnaire.

Science.gov (United States)

Crenshaw, Alexander O; Christensen, Andrew; Baucom, Donald H; Epstein, Norman B; Baucom, Brian R W

2017-07-01

The Communication Patterns Questionnaire (CPQ; Christensen, 1987) is a widely used self-report measure of couple communication behavior and is well validated for assessing the demand/withdraw interaction pattern, which is a robust predictor of poor relationship and individual outcomes (Schrodt, Witt, & Shimkowski, 2014). However, no studies have examined the CPQ's factor structure using analytic techniques sufficient by modern standards, nor have any studies replicated the factor structure using additional samples. Further, the current scoring system uses fewer than half of the total items for its 4 subscales, despite the existence of unused items that have content conceptually consistent with those subscales. These characteristics of the CPQ have likely contributed to findings that subscale scores are often troubled by suboptimal psychometric properties such as low internal reliability (e.g., Christensen, Eldridge, Catta-Preta, Lim, & Santagata, 2006). The present study uses exploratory and confirmatory factor analyses on 4 samples to reexamine the factor structure of the CPQ to improve scale score reliability and to determine if including more items in the subscales is warranted. Results indicate that a 3-factor solution (constructive communication and 2 demand/withdraw scales) provides the best fit for the data. That factor structure was confirmed in the replication samples. Compared with the original scales, the revised scales include additional items that expand the conceptual range of the constructs, substantially improve reliability of scale scores, and demonstrate stronger associations with relationship satisfaction and sensitivity to change in therapy. Implications for research and treatment are discussed. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Candidate nomination, intra-party democracy, and election violence in Africa

DEFF Research Database (Denmark)

Seeberg, Merete Bech; Wahman, Michael; Skaaning, Svend-Erik

2018-01-01

. When local-level or national-level competition between parties is low, as in much of Africa, electoral politics become a matter of intra-party rather than inter-party competition. Nominations are a part of the electoral process often left to the discretion of poorly institutionalized parties, free......This article introduces a special issue on candidate nomination, intra-party democracy, and election violence in Africa. Although a burgeoning literature on African democratization has focused on the topic of electoral violence, little attention has been given to violence during party nominations...... of the involvement of electoral management bodies and external monitors, and violence often results. Rather than developing an elaborate theoretical framework on the causes of nomination violence, our ambition in this introduction is to introduce the concept of nomination violence and situate it in the literatures...

Improved FTA methodology and application to subsea pipeline reliability design.

Science.gov (United States)

Lin, Jing; Yuan, Yongbo; Zhang, Mingyuan

2014-01-01

An innovative logic tree, Failure Expansion Tree (FET), is proposed in this paper, which improves on traditional Fault Tree Analysis (FTA). It describes a different thinking approach for risk factor identification and reliability risk assessment. By providing a more comprehensive and objective methodology, the rather subjective nature of FTA node discovery is significantly reduced and the resulting mathematical calculations for quantitative analysis are greatly simplified. Applied to the Useful Life phase of a subsea pipeline engineering project, the approach provides a more structured analysis by constructing a tree following the laws of physics and geometry. Resulting improvements are summarized in comparison table form.

Peculiarities of Grammatical Properties in Nominal Word Combinations

Directory of Open Access Journals (Sweden)

Irina B. Klienkova

2014-01-01

Full Text Available The article examines some peculiarities if grammatical properties of nominal word combinations based on the study of German-speaking Swiss press. The accumulated experience of linguists is analyzed and certain factors influencing the choice of syntactic relations in nominal word combinations with quantitative meaning are researched. It has been established that the choice of syntactic relations in such word combinations is determined by functional style, semantics and grammatical features of nouns - first or second components in a word combination. The aforementioned factors influencing the choice of syntactic relations in quantitative nominal word combinations are studied on the material of Germanspeaking Swiss press. The research revealed a number of peculiarities. First of all, German-speaking Swiss press uses such syntactic relation as genitive subordination quite often, not only on "special occasion" and unlike its use in Germany does not produce a magniloquent, pompous impression. Secondly, it has been established that the choice of syntactic relations in word combinations of the above-mentioned type of word combinations greatly depends on the semantic meaning of the noun - the first component of the word combination - and does not always coincide with the grammatical properties in nominal combinations in Germany. Thirdly, a clear dependence of syntactic relations choice is observed. Moreover, the article highlights the importance of grammatical features of the second component. These are such features as gender, number, case accompanied by noun declension. All the afore-mentioned features help to define the type of syntactic relations, which nominal quantitative word combinations may be connected by. The results of the comparisons of grammatical properties of quantitative nominal word combinations in German and Swiss press are demonstrated in a table below.

Nominal completion for rewrite systems with binders

OpenAIRE

Fernández, Maribel; Rubio Gimeno, Alberto

2012-01-01

We design a completion procedure for nominal rewriting systems, based on a generalisation of the recursive path ordering to take into account alpha equivalence. Nominal rewriting generalises first-order rewriting by providing support for the specification of binding operators. Completion of rewriting systems with binders is a notably difficult problem; the completion procedure presented in this paper is the first to deal with binders in rewrite rules. Peer Reviewed

Specialists' meeting on thermodynamics of FBR fuel subassemblies under nominal and non-nominal operating conditions. Summary report

Energy Technology Data Exchange (ETDEWEB)

1979-01-01

The purpose of the meeting was to provide a forum for exchange of information on thermo- and fluiddynamic investigations of LMFBR-subassembly. Special emphasis was placed on nominal and non-nominal conditions. The technical part of the meeting was divided into four sessions, as follows: status of the thermo- and fluiddynamic activities; physical and mathematical modelling of single phase; rod bundle thermohydraulics; experimental investigations; and future R and D. Separate abstracts are included for each of the papers.

Attitude Control of Quad-rotor by Improving the Reliability of Multi-Sensor System

Energy Technology Data Exchange (ETDEWEB)

Yu, Dong Hyeon; Chong, Kil To [Chon-bok National University, Jeonju (Korea, Republic of); Park, Jong Ho [Seonam University, Namwon (Korea, Republic of); Ryu, Ji Hyoung [ETRI, Daejeon (Korea, Republic of)

2015-05-15

This paper presents the results of study for improving the reliability of quadrotor attitude control by applying a multi-sensor along with a data fusion algorithm. First, a mathematical model of the quadrotor dynamics was developed. Then, using the quadrotor mathematical model, simulations were performed using the improved reliability multi-sensor data as the inputs. From the simulation results, we designed a Gimbal-equipped quadrotor system. With the quadrotor in a hover state, we performed experiments according to the angle change of the user's specifications . We then calculated the attitude control data from the actual experimental data. Furthermore, with additional simulations, we verified the performance of the designed quadrotor attitude control system with multiple sensors.

Connecting World Heritage Nominations and Monitoring with the Support of the Silk Roads Cultural Heritage Resource Information System

Science.gov (United States)

Vileikis, O.; Dumont, B.; Serruys, E.; Van Balen, K.; Tigny, V.; De Maeyer, P.

2013-07-01

Serial transnational World Heritage nominations are challenging the way cultural heritage has been managed and evaluated in the past. Serial transnational World Heritage nominations are unique in that they consist of multiple sites listed as one property, distributed in different countries, involving a large diversity of stakeholders in the process. As a result, there is a need for precise baseline information for monitoring, reporting and decision making. This type of nomination requires different methodologies and tools to improve the monitoring cycle from the beginning of the nomination towards the periodic reporting. The case study of the Silk Roads Cultural Heritage Resource Information System (CHRIS) illustrates the use of a Geographical Content Management System (Geo-CMS) supporting the serial transnational World Heritage nomination and the monitoring of the Silk Roads in the five Central Asian countries. The Silk Roads CHRIS is an initiative supported by UNESCO World Heritage Centre (WHC) and the Belgian Federal Science Policy Office (BELSPO), and developed by a consortium headed by the Raymond Lemaire International Centre for Conservation (RLICC) at the KULeuven. The Silk Roads CHRIS has been successfully assisting in the preparation of the nomination dossiers of the Republics of Kazakhstan, Tajikistan and Uzbekistan and will be used as a tool for monitoring tool in the Central Asian countries.

Reliability improvement: where do we go from here. The role of codes and standards

International Nuclear Information System (INIS)

Davidson, R.H.

1976-01-01

The role of codes and standards in contributing to the future improvement is discussed. The Nuclear Plant Reliability Data System is examined. It is suggested that two systems of the type are needed. One system should focus on component and system reliability while the other should focus on system availability, capacity factor, and fixed outage rate assessment

25 CFR 90.30 - Nominating conventions and petitions.

Science.gov (United States)

2010-04-01

...; also, names of any independent candidates nominated by petition of not less than 25 qualified voters... number of qualified voters in attendance, together with the names of candidates nominated for the various... names may be placed on the official ballot. No person shall be considered a candidate for tribal office...

The reliability and validity of hand-held refractometry water content measures of hydrogel lenses.

Science.gov (United States)

Nichols, Jason J; Mitchell, G Lynn; Good, Gregory W

2003-06-01

To investigate within- and between-examiner reliability and validity of hand-held refractometry water content measures of hydrogel lenses. Nineteen lenses of various nominal water contents were examined by two examiners on two occasions separated by 1 hour. An Atago N2 hand-held refractometer was used for all water content measures. Lenses were presented in a random order to each examiner by a third party, and examiners were masked to any potential lens identifiers. Intraclass correlation coefficients (ICC), 95% limits of agreement, and Wilcoxon signed rank test were used to characterize the within- and between-examiner reliability and validity of lens water content measures. Within-examiner reliability was excellent (ICC, 0.97; 95% limits of agreement, -3.6% to +5.7%), and the inter-visit mean difference of 1.1 +/- 2.4% was not biased (p = 0.08). Between-examiner reliability was also excellent (ICC, 0.98; 95% limits of agreement, -4.1% to +3.9%). The mean difference between examiners was -0.1 +/- 2.1% (p = 0.83). The mean difference between the nominally reported water content and our water content measures was -2.1 +/- 1.7% (p refractometry and is material dependent. Therefore, investigators may need to account for bias when measuring hydrogel lens water content via hand-held refractometry.

Reliability

OpenAIRE

Condon, David; Revelle, William

2017-01-01

Separating the signal in a test from the irrelevant noise is a challenge for all measurement. Low test reliability limits test validity, attenuates important relationships, and can lead to regression artifacts. Multiple approaches to the assessment and improvement of reliability are discussed. The advantages and disadvantages of several different approaches to reliability are considered. Practical advice on how to assess reliability using open source software is provided.

Improved Yield, Performance and Reliability of High-Actuator-Count Deformable Mirrors, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The project team will conduct processing and design research aimed at improving yield, performance, and reliability of high-actuator-count micro-electro-mechanical...

7 CFR 25.502 - Nominations by State-chartered economic development corporations.

Science.gov (United States)

2010-01-01

... 7 Agriculture 1 2010-01-01 2010-01-01 false Nominations by State-chartered economic development... AND ENTERPRISE COMMUNITIES Special Rules § 25.502 Nominations by State-chartered economic development corporations. Any rural area nominated by an economic development corporation chartered by a State and...

Evaluation of Smart Grid Technologies Employed for System Reliability Improvement: Pacific Northwest Smart Grid Demonstration Experience

Energy Technology Data Exchange (ETDEWEB)

Agalgaonkar, Yashodhan P.; Hammerstrom, Donald J.

2017-06-01

The Pacific Northwest Smart Grid Demonstration (PNWSGD) was a smart grid technology performance evaluation project that included multiple U.S. states and cooperation from multiple electric utilities in the northwest region. One of the local objectives for the project was to achieve improved distribution system reliability. Toward this end, some PNWSGD utilities automated their distribution systems, including the application of fault detection, isolation, and restoration and advanced metering infrastructure. In light of this investment, a major challenge was to establish a correlation between implementation of these smart grid technologies and actual improvements of distribution system reliability. This paper proposes using Welch’s t-test to objectively determine and quantify whether distribution system reliability is improving over time. The proposed methodology is generic, and it can be implemented by any utility after calculation of the standard reliability indices. The effectiveness of the proposed hypothesis testing approach is demonstrated through comprehensive practical results. It is believed that wider adoption of the proposed approach can help utilities to evaluate a realistic long-term performance of smart grid technologies.

Inter-rater reliability of data elements from a prototype of the Paul Coverdell National Acute Stroke Registry

Directory of Open Access Journals (Sweden)

Wehner Susan

2008-06-01

Full Text Available Abstract Background The Paul Coverdell National Acute Stroke Registry (PCNASR is a U.S. based national registry designed to monitor and improve the quality of acute stroke care delivered by hospitals. The registry monitors care through specific performance measures, the accuracy of which depends in part on the reliability of the individual data elements used to construct them. This study describes the inter-rater reliability of data elements collected in Michigan's state-based prototype of the PCNASR. Methods Over a 6-month period, 15 hospitals participating in the Michigan PCNASR prototype submitted data on 2566 acute stroke admissions. Trained hospital staff prospectively identified acute stroke admissions, abstracted chart information, and submitted data to the registry. At each hospital 8 randomly selected cases were re-abstracted by an experienced research nurse. Inter-rater reliability was estimated by the kappa statistic for nominal variables, and intraclass correlation coefficient (ICC for ordinal and continuous variables. Factors that can negatively impact the kappa statistic (i.e., trait prevalence and rater bias were also evaluated. Results A total of 104 charts were available for re-abstraction. Excellent reliability (kappa or ICC > 0.75 was observed for many registry variables including age, gender, black race, hemorrhagic stroke, discharge medications, and modified Rankin Score. Agreement was at least moderate (i.e., 0.75 > kappa ≥; 0.40 for ischemic stroke, TIA, white race, non-ambulance arrival, hospital transfer and direct admit. However, several variables had poor reliability (kappa Conclusion The excellent reliability of many of the data elements supports the use of the PCNASR to monitor and improve care. However, the poor reliability for several variables, particularly time-related events in the emergency department, indicates the need for concerted efforts to improve the quality of data collection. Specific recommendations

Component aging and reliability trends in Loviisa Nuclear Power Plant

International Nuclear Information System (INIS)

Jankala, K.E.; Vaurio, J.K.

1989-01-01

A plant-specific reliability data collection and analysis system has been developed at the Loviisa Nuclear Power Plant to perform tests for component aging and analysis of reliability trends. The system yields both mean values an uncertainty distribution information for reliability parameters to be used in the PSA project underway and in living-PSA applications. Several different trend models are included in the reliability analysis system. Simple analytical expressions have been derived from the parameters of these models, and their variances have been obtained using the information matrix. This paper is focused on the details of the learning/aging models and the estimation of their parameters and statistical accuracies. Applications to the historical data of the Loviisa plant are presented. The results indicate both up- and down-trends in failure rates as well as individuality between nominally identical components

Advancements in valve technology and industry lessons lead to improved plant reliability and cost savings

International Nuclear Information System (INIS)

Sharma, V.; Kalsi, M.S.

2005-01-01

Plant reliability and safety hinges on the proper functioning of several valves. Recent advancements in valve technology have resulted in new analytical and test methods for evaluating and improving valve and actuator reliability. This is especially significant in critical service applications in which the economic impact of a valve failure on production, outage schedules and consequential damages far surpasses the initial equipment purchase price. This paper presents an overview of recent advances in valve technology driven by reliability concerns and cost savings objectives without comprising safety in the Nuclear Power Industry. This overview is based on over 27 years of experience in supporting US and International nuclear power utilities, and contributing to EPRI, and NSSS Owners' Groups in developing generic models/methodologies to address industry wide issues; performing design basis reviews; and implementing plant-wide valve reliability improvement programs. Various analytical prediction software and hardware solutions and training seminars are now available to implement valve programs covering power plants' lifecycle from the construction phase through life extension and power up rate. These tools and methodologies can enhance valve-engineering activities including the selection, sizing, proper application, condition monitoring, failure analysis, and condition based maintenance optimization with a focus on potential bad actors. This paper offers two such examples, the Kalsi Valve and Actuator Program (KVAP) and Check Valve Analysis and Prioritization (CVAP) [1-3, 8, 9, 11-13]. The advanced, validated torque prediction models incorporated into KVAP software for AOVs and MOVs have improved reliability of margin predictions and enabled cost savings through elimination of unwarranted equipment modifications. CVAP models provides a basis to prioritize the population of valves recommended for preventive maintenance, inspection and/or modification, allowing

78 FR 90 - National Medal of Technology and Innovation Call for 2013 Nominations

Science.gov (United States)

2013-01-02

... successful products and services. Eligibility and Nomination Criteria: Nomination Guidelines and nomination...] National Medal of Technology and Innovation Call for 2013 Nominations AGENCY: United States Patent and... Medal of Technology and Innovation (NMTI). Since establishment by Congress in the Stevenson-Wydler...

Active Thermal Control for Reliability Improvement of MOS-gated Power Devices

DEFF Research Database (Denmark)

Soldati, Alessandro; Concari, Carlo; Dossena, Fabrizio

2017-01-01

reliability and lifetime. These figures can then be improved, which eases the adoption of electrification in markets, such as transportation, where they are still below target values. The proposed ATC method leaves electric load parameters untouched, while acting dynamically on gate parameters, namely voltage...... and resistance. A model-predictive control (MPC) strategy is used to determine the most suitable parameters to use. Simulations of the control scheme are presented first, to predict the potential benefits on temperature swing amplitude, and the consequent improvements in terms of device lifetime are inferred...

Improved reliability of residential heat pumps; Foerbaettrad driftsaekerhet hos villavaermepumpar

Energy Technology Data Exchange (ETDEWEB)

Haglund Stignor, Caroline; Larsson, Kristin; Jensen, Sara; Larsson, Johan; Berg, Johan; Lidbom, Peter; Rolfsman, Lennart

2012-07-01

Today, heat pump heating systems are common in Swedish single-family houses. Many owners are pleased with their installation, but statistics show that a certain number of heat pumps break every year, resulting in high costs for both insurance companies and owners. On behalf of Laensfoersaekringars Forskningsfond, SP Energy Technology has studied the cause of the most common failures for residential heat pumps. The objective of the study was to suggest what measures to be taken to reduce the number of failures, i.e. improving the reliability of heat pumps. The methods used were analysis of public failure statistics and sales statistics and interviews with heat pump manufacturers, installers, service representatives and assessors at Laensfoersaekringar. In addition, heat pump manuals have been examined and literature searches for various methods for durability tests have been performed. Based on the outcome from the interviews the most common failures were categorized by if they; 1. Could have been prevented by better operation and maintenance of the heat pump. 2. Caused by a poorly performed installation. 3. Could have been prevented if certain parameters had been measured, recorded and followed up. 4. Are due to poor quality of components or systems. However, the results show that many of the common failures fall into several different categories and therefore, different types of measures must be taken to improve the operational reliability of residential heat pumps. The interviews tell that failures often are caused by poor installation, neglected maintenance and surveillance, and poor quality of standard components or that components are used outside their declared operating range. The quality of the installations could be improved by increasing installers' knowledge about heat pumps and by requiring that an installation protocol shall be filled-in. It is also important that the owner of the heat pump performs the preventive maintenance recommended by the

Improved reliability of residential heat pumps; Foerbaettrad driftsaekerhet hos villavaermepumpar

Energy Technology Data Exchange (ETDEWEB)

Haglund Stignor, Caroline; Larsson, Kristin; Jensen, Sara; Larsson, Johan; Berg, Johan; Lidbom, Peter; Rolfsman, Lennart

2012-07-01

Today, heat pump heating systems are common in Swedish single-family houses. Many owners are pleased with their installation, but statistics show that a certain number of heat pumps break every year, resulting in high costs for both insurance companies and owners. On behalf of Laensfoersaekringars Forskningsfond, SP Energy Technology has studied the cause of the most common failures for residential heat pumps. The objective of the study was to suggest what measures to be taken to reduce the number of failures, i.e. improving the reliability of heat pumps. The methods used were analysis of public failure statistics and sales statistics and interviews with heat pump manufacturers, installers, service representatives and assessors at Laensfoersaekringar. In addition, heat pump manuals have been examined and literature searches for various methods for durability tests have been performed. Based on the outcome from the interviews the most common failures were categorized by if they; 1. Could have been prevented by better operation and maintenance of the heat pump. 2. Caused by a poorly performed installation. 3. Could have been prevented if certain parameters had been measured, recorded and followed up. 4. Are due to poor quality of components or systems. However, the results show that many of the common failures fall into several different categories and therefore, different types of measures must be taken to improve the operational reliability of residential heat pumps. The interviews tell that failures often are caused by poor installation, neglected maintenance and surveillance, and poor quality of standard components or that components are used outside their declared operating range. The quality of the installations could be improved by increasing installers' knowledge about heat pumps and by requiring that an installation protocol shall be filled-in. It is also important that the owner of the heat pump performs the preventive maintenance recommended by the

Tense and Mood in Basque Nominalizations

Directory of Open Access Journals (Sweden)

Jon Ortiz de Urbina

2005-06-01

Full Text Available This article examines the role of tense and mood factors in the selection of complement clauses in Basque, arguing against apparent cases of free variation, discussed here with respect to choice of complement types. In particular, the article concentrates on the ability of some verb classes to take complements in the nominalized form. As with Spanish infinitives, the availability of nominalized complements correlates with the class membership of the main predicate into one of the subjunctive-taking groups. Apparent counterexamples, i.e., predicates which can take both a nominalized/subjunctive complement and an indicative one, will be shown to stem from differences in modality and tense. Variation is considered from a cross-linguistic perspective, and the discussion of the Basque examples is linked to 'double selection' phenomena in Spanish and Romance complements. Particular attention is paid to prospective complements, and a semantic approach is offered to explain why double selection phenomena emerge in this particular case. As expected, while the morphology of Basque and Spanish complement types is strikingly different, the semantic factors intervening in the choice and distribution of complement types will be shown not display the same degree of variation.

Reliability-Based Design Optimization of Trusses with Linked-Discrete Design Variables using the Improved Firefly Algorithm

Directory of Open Access Journals (Sweden)

N. M. Okasha

2016-04-01

Full Text Available In this paper, an approach for conducting a Reliability-Based Design Optimization (RBDO of truss structures with linked-discrete design variables is proposed. The sections of the truss members are selected from the AISC standard tables and thus the design variables that represent the properties of each section are linked. Latin hypercube sampling is used in the evaluation of the structural reliability. The improved firefly algorithm is used for the optimization solution process. It was found that in order to use the improved firefly algorithm for efficiently solving problems of reliability-based design optimization with linked-discrete design variables; it needs to be modified as proposed in this paper to accelerate its convergence.

Improved Reliability of SiC Pressure Sensors for Long Term High Temperature Applications

Science.gov (United States)

Okojie, R. S.; Nguyen, V.; Savrun, E.; Lukco, D.

2011-01-01

We report advancement in the reliability of silicon carbide pressure sensors operating at 600 C for extended periods. The large temporal drifts in zero pressure offset voltage at 600 C observed previously were significantly suppressed to allow improved reliable operation. This improvement was the result of further enhancement of the electrical and mechanical integrity of the bondpad/contact metallization, and the introduction of studded bump bonding on the pad. The stud bump contact promoted strong adhesion between the Au bond pad and the Au die-attach. The changes in the zero offset voltage and bridge resistance over time at temperature were explained by the microstructure and phase changes within the contact metallization, that were analyzed with Auger electron spectroscopy (AES) and field emission scanning electron microscopy (FE-SEM).

Photovoltaic module reliability improvement through application testing and failure analysis

Science.gov (United States)

Dumas, L. N.; Shumka, A.

1982-01-01

During the first four years of the U.S. Department of Energy (DOE) National Photovoltatic Program, the Jet Propulsion Laboratory Low-Cost Solar Array (LSA) Project purchased about 400 kW of photovoltaic modules for test and experiments. In order to identify, report, and analyze test and operational problems with the Block Procurement modules, a problem/failure reporting and analysis system was implemented by the LSA Project with the main purpose of providing manufacturers with feedback from test and field experience needed for the improvement of product performance and reliability. A description of the more significant types of failures is presented, taking into account interconnects, cracked cells, dielectric breakdown, delamination, and corrosion. Current design practices and reliability evaluations are also discussed. The conducted evaluation indicates that current module designs incorporate damage-resistant and fault-tolerant features which address field failure mechanisms observed to date.

Money illusion and nominal inertia in experimental asset markets

NARCIS (Netherlands)

Noussair, C.N.; Richter, G.; Tyran, J.R.

2012-01-01

We test whether large but purely nominal shocks affect real asset market prices. We subject a laboratory asset market to an exogenous shock, which either inflates or deflates the nominal fundamental value of the asset while holding the real fundamental value constant. After an inflationary shock,

Money Illusion and Nominal Inertia in Experimental Asset Markets

DEFF Research Database (Denmark)

Noussair, Charles N.; Richter, Gregers; Tyran, Jean-Robert

We test whether large but purely nominal shocks affect real asset market prices. We subject a laboratory asset market to an exogenous shock, which either inflates or deflates the nominal fundamental value of the asset, while holding the real fundamental value constant. After an inflationary shock...

Improving the reliability of nuclear reprocessing by application of computers and mathematical modelling

International Nuclear Information System (INIS)

Gabowitsch, E.; Trauboth, H.

1982-01-01

After a brief survey of the present and expected future state of nuclear energy utilization, which should demonstrate the significance of nuclear reprocessing, safety and reliability aspects of nuclear reprocessing plants (NRP) are considered. Then, the principal possibilities of modern computer technology including computer systems architecture and application-oriented software for improving the reliability and availability are outlined. In this context, two information systems being developed at the Nuclear Research Center Karlsruhe (KfK) are briefly described. For design evaluation of certain areas of a large NRP mathematical methods and computer-aided tools developed, used or being designed by KfK are discussed. In conclusion, future research to be pursued in information processing and applied mathematics in support of reliable operation of NRP's is proposed. (Auth.)

7 CFR 1260.143 - Nominations.

Science.gov (United States)

2010-01-01

... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE BEEF PROMOTION AND RESEARCH Beef Promotion and Research Order Cattlemen's Beef Promotion and Research Board § 1260.143 Nominations. All...

Suncor maintenance and reliability

Energy Technology Data Exchange (ETDEWEB)

Little, S. [Suncor Energy, Calgary, AB (Canada)

2006-07-01

Fleet maintenance and reliability at Suncor Energy was discussed in this presentation, with reference to Suncor Energy's primary and support equipment fleets. This paper also discussed Suncor Energy's maintenance and reliability standard involving people, processes and technology. An organizational maturity chart that graphed organizational learning against organizational performance was illustrated. The presentation also reviewed the maintenance and reliability framework; maintenance reliability model; the process overview of the maintenance and reliability standard; a process flow chart of maintenance strategies and programs; and an asset reliability improvement process flow chart. An example of an improvement initiative was included, with reference to a shovel reliability review; a dipper trip reliability investigation; bucket related failures by type and frequency; root cause analysis of the reliability process; and additional actions taken. Last, the presentation provided a graph of the results of the improvement initiative and presented the key lessons learned. tabs., figs.

Improving reliability in south Ajax with IntelliTEAM

Energy Technology Data Exchange (ETDEWEB)

Starck, A.P. [Veridian Connections Inc., Ajax, ON (Canada)

2010-07-01

Veridian Connections Incorporated is a local electricity distribution company in Ontario that is faced with end of life feeder cables and an aging system. Most of the feeders are combined overhead and underground cables supplied from several substations with a limited transfer capability. The commercial activity in the utility's service area is intolerant to sustained outages. Although the initial plan was to replace the cables, capital and time constraints led the utility to chose the IntelliTEAM 2 system to improve reliability, by reducing the frequency, duration and impact of outages. The unique system is based on submersible switchgear, PulseClosing and includes the substation breakers as IntelliTEAM devices. The current plan to implement a smart grid turns sustained outages into momentary outages; reduces the number of customers affected by a sustained failure; improves the ability to transfer loads; and reduces stresses on aged cables. The self healing system restores customers in less than a minute and provides visibility to SCADA operators through a high speed SpeedNet radio system. tabs., figs.

7 CFR 1280.202 - Nominations.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Nominations. 1280.202 Section 1280.202 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... INFORMATION ORDER Lamb Promotion, Research, and Information Order Lamb Promotion, Research, and Information...

Power electronics reliability analysis.

Energy Technology Data Exchange (ETDEWEB)

Smith, Mark A.; Atcitty, Stanley

2009-12-01

This report provides the DOE and industry with a general process for analyzing power electronics reliability. The analysis can help with understanding the main causes of failures, downtime, and cost and how to reduce them. One approach is to collect field maintenance data and use it directly to calculate reliability metrics related to each cause. Another approach is to model the functional structure of the equipment using a fault tree to derive system reliability from component reliability. Analysis of a fictitious device demonstrates the latter process. Optimization can use the resulting baseline model to decide how to improve reliability and/or lower costs. It is recommended that both electric utilities and equipment manufacturers make provisions to collect and share data in order to lay the groundwork for improving reliability into the future. Reliability analysis helps guide reliability improvements in hardware and software technology including condition monitoring and prognostics and health management.

Reliability Improvement of Power Converters by Means of Condition Monitoring of IGBT Modules

DEFF Research Database (Denmark)

Choi, Ui Min; Blaabjerg, Frede; Jørgensen, S.

2017-01-01

Power electronic systems have gradually gained an important status in a wide range of industrial applications such as renewable generation, motor drives, automotive, and railway transportation. Accordingly, recent research makes an effort to improve the reliability of power electronic systems...

7 CFR 929.22 - Nomination.

Science.gov (United States)

2010-01-01

... marketing order districts as designated in § 929.20(c). (2) Six qualified persons for members and four... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... nominations in accordance with this section. (c) Whenever any cooperative marketing organization handles more...

Gradability in the nominal domain

NARCIS (Netherlands)

Constantinescu, Camelia

2011-01-01

This dissertation investigates whether and how gradability is manifested in the nominal domain, as well as the implications this could have for theories of the representation of gradability. It is shown that the various gradability diagnostics proposed in the literature not only yield different

Nominal Performance Biosphere Dose Conversion Factor Analysis

International Nuclear Information System (INIS)

Wasiolek, M.

2000-01-01

The purpose of this report was to document the process leading to development of the Biosphere Dose Conversion Factors (BDCFs) for the postclosure nominal performance of the potential repository at Yucca Mountain. BDCF calculations concerned twenty-four radionuclides. This selection included sixteen radionuclides that may be significant nominal performance dose contributors during the compliance period of up to 10,000 years, five additional radionuclides of importance for up to 1 million years postclosure, and three relatively short-lived radionuclides important for the human intrusion scenario. Consideration of radionuclide buildup in soil caused by previous irrigation with contaminated groundwater was taken into account in the BDCF development. The effect of climate evolution, from the current arid conditions to a wetter and cooler climate, on the BDCF values was evaluated. The analysis included consideration of different exposure pathway's contribution to the BDCFs. Calculations of nominal performance BDCFs used the GENII-S computer code in a series of probabilistic realizations to propagate the uncertainties of input parameters into the output. BDCFs for the nominal performance, when combined with the concentrations of radionuclides in groundwater allow calculation of potential radiation doses to the receptor of interest. Calculated estimates of radionuclide concentration in groundwater result from the saturated zone modeling. The integration of the biosphere modeling results (BDCFs) with the outcomes of the other component models is accomplished in the Total System Performance Assessment (TSPA) to calculate doses to the receptor of interest from radionuclides postulated to be released to the environment from the potential repository at Yucca Mountain

Resilience and reliability of compact vertical-flow treatment wetlands designed for tropical climates.

Science.gov (United States)

Lombard-Latune, R; Pelus, L; Fina, N; L'Etang, F; Le Guennec, B; Molle, P

2018-06-10

Most of the tropical areas have sanitation problems to contend with. The French system of vertical-flow treatment wetlands (FS-VFTW) fed with raw wastewater could be a good water and sludge management solution. The purpose-adapted tropical design can reduce area requirement to below 1 m 2 /population equivalents (p.e.). The Taupinière FS-VFTW on Martinique Island was built according to this design, with one stage but with a saturated layer at the bottom of the filter and a simplified trickling filter (TF) added for further treatment to meet the high performances targeted. Unsaturated/saturated vertical-flow filters (US/S FS-VFTW) have shown improved performances on total nitrogen, carbon and suspended solids removal in temperate climates, but the performances in tropical conditions remain unknown. Here, we report on real-world-operation in the French Overseas Territories (FOT), the reliability and performances of this VFCW tropical-design. The system experienced loading conditions ranging from 30% to 165% of nominal carbonaceous biological oxygen demand (BOD 5 ), as well as tropical rainstorms that brought over 7 times the nominal hydraulic load. Over a period of 3 years, 29 campaigns collected 24-h flow-proportional samples at each treatment stage (raw wastewater, FS-VFTW outlet, TF outlet). When applied loads were close to nominal values, the US/S FS-VFTW itself guarantees 85/90/60/50% removal and 125/25/40/50 mg/L at the outlet for chemical oxygen demand (COD)/total suspended solids (TSS)/total Kjeldahl nitrogen (TKN)/total nitrogen (TN), respectively. By comparison with US/S systems in mainland France, it appears that the warmer tropical-climate temperatures facilitate both nitrification and denitrification kinetics. Performances in overload conditions confirm that the US/S FS-VFTW remains robust and reliable although COD and TKN removal are impacted, especially after strong tropical rain events. By adding a simple compact trickling filter to a US/S FS

12 CFR 1261.6 - Nominations for member and independent directorships.

Science.gov (United States)

2010-01-01

... areas: auditing and accounting, derivatives, financial management, organizational management, project... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Nominations for member and independent... § 1261.6 Nominations for member and independent directorships. (a) Election announcement. Within a...

Improved reliability of wind turbine towers with active tuned mass dampers (ATMDs)

Science.gov (United States)

Fitzgerald, Breiffni; Sarkar, Saptarshi; Staino, Andrea

2018-04-01

Modern multi-megawatt wind turbines are composed of slender, flexible, and lightly damped blades and towers. These components exhibit high susceptibility to wind-induced vibrations. As the size, flexibility and cost of the towers have increased in recent years, the need to protect these structures against damage induced by turbulent aerodynamic loading has become apparent. This paper combines structural dynamic models and probabilistic assessment tools to demonstrate improvements in structural reliability when modern wind turbine towers are equipped with active tuned mass dampers (ATMDs). This study proposes a multi-modal wind turbine model for wind turbine control design and analysis. This study incorporates an ATMD into the tower of this model. The model is subjected to stochastically generated wind loads of varying speeds to develop wind-induced probabilistic demand models for towers of modern multi-megawatt wind turbines under structural uncertainty. Numerical simulations have been carried out to ascertain the effectiveness of the active control system to improve the structural performance of the wind turbine and its reliability. The study constructs fragility curves, which illustrate reductions in the vulnerability of towers to wind loading owing to the inclusion of the damper. Results show that the active controller is successful in increasing the reliability of the tower responses. According to the analysis carried out in this paper, a strong reduction of the probability of exceeding a given displacement at the rated wind speed has been observed.

Rigidity of Nominal Wages of Non-Production Workers in Industrial Sector

Directory of Open Access Journals (Sweden)

Bambang Sulistiyono

2016-06-01

Full Text Available Excess supply of labor leads to low the levels of nominal wages received by workers. The amount of minimum wage rate exceeds the market wage rate. The determination of minimum wage is a factor manifested in the institutional and regulatory Provincial Minimum Wage or a District Minimum Wage. Unfortunately, it has made nominal wages  difficult to drop below the minimum wage level. High or low level of nominal wages are associated with worker productivity. Further, nominal wages are rigid to go down. If they have increased, they can not be dropped in the future even though the company's performance is declined. Knowing that condition, in designing the remuneration system, an employer should pay attention to the rigidity of nominal wages, so that when  company's performance declines, the company will not be interfered because of the wages burden.  Furthermore, unions and government should consider the rigidity impact of nominal wages that go down. Thus, when macroeconomic conditions deteriorate and company's performance drops, the company will not go bankrupt due to high labor costs. If the company goes bankrupt, the workers will loose their jobs as a result of employment termination, while the government will face the unemployment problem. 

Role of recent research in improving check valve reliability at nuclear power plants

International Nuclear Information System (INIS)

Kalsi, M.S.; Horst, C.L.; Wang, J.K.; Sharma, V.

1990-01-01

Check valve failures at nuclear power plants in recent years have led to serious safety concerns, and caused extensive damage to other plant components which had a significant impact on plant availability. In order to understand the failure mechanism and improve the reliability of check valves, a systematic research effort was proposed by Kalsi Engineering, Inc. to U.S. Nuclear Regulatory Commission (NRC). The overall goal of the research was to develop models for predicting the performance and degradation of swing check valves in nuclear power plant systems so that appropriate preventive maintenance or design modifications can be performed to improve the reliability of check valves. Under Phase I of this research, a large matrix of tests was run with instrumented swing check valves to determine the stability of the disc under a variety of upstream flow disturbances, covering a wide range of disc stop positions and flow velocities in two different valve sizes. The goals of Phase II research were to develop predictive models which quantify the anticipated degradation of swing check valves that have flow disturbances closely upstream of the valve and are operating under flow velocities that do not result in full disc opening. This research allows the inspection/maintenance activities to be focussed on those check valves that are more likely to suffer premature degradation. The quantitative wear and fatigue prediction methodology can be used to develop a sound preventive maintenance program. The results of the research also show the improvements in check valve performance/reliability that can be achieved by certain modifications in the valve design

Improvement of Steam Generator Reliability for GEN-IV SFR

Energy Technology Data Exchange (ETDEWEB)

Kim, Seong O; Kim Se Yun; Kim, Seok Hoon; Eoh, Jae Hyuk; Lee, Hyeong Yeon; Choi, Byung Seon

2005-11-15

The R and D items performed in this study were selected from the R and D task of ' Reliability improvement of Steam Generator' of GEN-IV SFR Component Design and BOP. Since this project deals with one of the most important issues for a GEN-IV SFR system, it needs to enhance the domestic technical backgrounds associated with the corresponding R and D items even for a very short period by 2005. This study provides the R and D results for i) Development of assessment methodology for dissimilar metal weld and ii) Development of multi-dimensional simulation methodology for a SWR event in a SFR steam generator.

Improvement of Steam Generator Reliability for GEN-IV SFR

International Nuclear Information System (INIS)

Kim, Seong O; Kim Se Yun; Kim, Seok Hoon; Eoh, Jae Hyuk; Lee, Hyeong Yeon; Choi, Byung Seon

2005-11-01

The R and D items performed in this study were selected from the R and D task of ' Reliability improvement of Steam Generator' of GEN-IV SFR Component Design and BOP. Since this project deals with one of the most important issues for a GEN-IV SFR system, it needs to enhance the domestic technical backgrounds associated with the corresponding R and D items even for a very short period by 2005. This study provides the R and D results for i) Development of assessment methodology for dissimilar metal weld and ii) Development of multi-dimensional simulation methodology for a SWR event in a SFR steam generator

The Children's Play Therapy Instrument (CPTI). Description, development, and reliability studies.

Science.gov (United States)

Kernberg, P F; Chazan, S E; Normandin, L

1998-01-01

The Children's Play Therapy Instrument (CPTI), its development, and reliability studies are described. The CPTI is a new instrument to examine a child's play activity in individual psychotherapy. Three independent raters used the CPTI to rate eight videotaped play therapy vignettes. Results were compared with the authors' consensual scores from a preliminary study. Generally good to excellent levels of interrater reliability were obtained for the independent raters on intraclass correlation coefficients for ordinal categories of the CPTI. Likewise, kappa levels were acceptable to excellent for nominal categories of the scale. The CPTI holds promise to become a reliable measure of play activity in child psychotherapy. Further research is needed to assess discriminant validity of the CPTI for use as a diagnostic tool and as a measure of process and outcome.

Improved reliability, maintainability and safety through elastomer upgrading

International Nuclear Information System (INIS)

Wensel, R.; Wittich, K.C.

1995-01-01

Equipment in nuclear plants has historically contained whatever elastomer each component supplier traditionally used for corresponding non-nuclear service. The resulting proliferation of elastomer compounds, many of which are far from optimal for the service conditions (e.g., pressure, temperature, radiation, etc.), has multiplied the costs to provide station reliability, maintainability and safety. Cost-effective improvements are being achieved in CANDU plants by upgrading and standardizing on a handful of high performing elastomer compounds. These upgraded materials offer significant gains in service life over the materials they replace (often by factors of 2 or more). This rationalization of elastomer compounds also facilitates the EQ process for safety-related equipment. Detailed test data on aging is currently being generated for these specific elastomers, encompassing the conditions and media (air, water, oil) common in CANDU service. Two key elements characterize this testing. First, each result is specific to the compound used in the test, and second, it is specific to the tested failure mode (e.g., compression set, extrusion, fracture, etc.). Having fewer, but more thoroughly tested compounds, avoids the penalty (associated with poorly characterized materials) of having to replace parts prematurely because of conservatism, while maintaining safe, reliable service. This paper provides an overview of this approach covering: the benefits of compound rationalization; and the how and why of establishing relevant failure criteria; appropriate quality assurance to maintain EQ; procurement, storage and handling guidelines; and monitoring and predicting in-service degradation. (author)

Reliability of infarct volumetry: Its relevance and the improvement by a software-assisted approach.

Science.gov (United States)

Friedländer, Felix; Bohmann, Ferdinand; Brunkhorst, Max; Chae, Ju-Hee; Devraj, Kavi; Köhler, Yvette; Kraft, Peter; Kuhn, Hannah; Lucaciu, Alexandra; Luger, Sebastian; Pfeilschifter, Waltraud; Sadler, Rebecca; Liesz, Arthur; Scholtyschik, Karolina; Stolz, Leonie; Vutukuri, Rajkumar; Brunkhorst, Robert

2017-08-01

Despite the efficacy of neuroprotective approaches in animal models of stroke, their translation has so far failed from bench to bedside. One reason is presumed to be a low quality of preclinical study design, leading to bias and a low a priori power. In this study, we propose that the key read-out of experimental stroke studies, the volume of the ischemic damage as commonly measured by free-handed planimetry of TTC-stained brain sections, is subject to an unrecognized low inter-rater and test-retest reliability with strong implications for statistical power and bias. As an alternative approach, we suggest a simple, open-source, software-assisted method, taking advantage of automatic-thresholding techniques. The validity and the improvement of reliability by an automated method to tMCAO infarct volumetry are demonstrated. In addition, we show the probable consequences of increased reliability for precision, p-values, effect inflation, and power calculation, exemplified by a systematic analysis of experimental stroke studies published in the year 2015. Our study reveals an underappreciated quality problem in translational stroke research and suggests that software-assisted infarct volumetry might help to improve reproducibility and therefore the robustness of bench to bedside translation.

Good performance in Japan is proof of continuing safety and reliability improvement practice

International Nuclear Information System (INIS)

Sumi, Y.

1987-01-01

Nuclear power is a vital energy supply source for both security and economy for such countries as Japan whose sources of energy are dependent on imported materials. This is the very reason why Japan gives her national priority to the improvement of nuclear power safety and reliability. As of the end of 1986, total nuclear power capacity owned and operated by private utility companies in Japan amounted to 24521 MW with 32 units sharing -- 19% of the total generating capacity. Moreover, during 1986 these units scored a remarkably high capacity factor of 76.2% and shared almost 28% of the nationwide electric power production, thereby contributing to a considerable saving of imported sources of energy. This outstanding record has been achieved by the parties concerned who dedicated themselves to furthering nuclear plant safety and reliability improvement. In this connection, this paper summarizes those key factors contributing to the good nuclear power plant performance of the Kansai Electric Power Company

Determination of nominal accelerating potential

International Nuclear Information System (INIS)

Nizin, P.; Kase, K.

1986-01-01

We present a simple linear relationship between the nominal accelerating potential (NAP) and the ratios of ionization measurements made with constant source--detector distance and at two different phantom thicknesses. This relationship can be used as a standard, unambiguous method for determining NAP for use in dosimetry and quality control

The impact of intrinsic motivation on session attendance and reliable cognitive improvement in cognitive remediation in schizophrenia.

Science.gov (United States)

Bryce, S D; Lee, S J; Ponsford, J L; Lawrence, R J; Tan, E J; Rossell, S L

2018-06-20

Cognitive remediation (CR) is considered a potentially effective method of improving cognitive function in people with schizophrenia. Few studies, however, have explored the role of intrinsic motivation on treatment utilization or training outcomes in CR in this population. This study explored the impact of task-specific intrinsic motivation on attendance and reliable cognitive improvement in a controlled trial comparing CR with a computer game (CG) playing control. Forty-nine participants with schizophrenia or schizoaffective disorder, allocated to 10 weeks of group-based CR (n = 25) or CG control (n = 24), provided complete outcome data at baseline. Forty-three participants completed their assigned intervention. Cognition, psychopathology and intrinsic motivation were measured at baseline and end-treatment. Regression analyses explored the relative contribution of baseline motivation and other clinical factors to session attendance as well as the association of baseline and change in intrinsic motivation with the odds of reliable cognitive improvement (calculated using reliable change indices). Baseline reports of perceived program value were the only significant multivariable predictor of session attendance when including global cognition and psychiatric symptomatology. The odds of reliable cognitive improvement significantly increased with greater improvements in program interest and value from baseline to end-treatment. Motivational changes over time were highly variable between participants. Task-specific intrinsic motivation in schizophrenia may represent an important patient-related factor that contributes to session attendance and cognitive improvements in CR. Regular evaluation and enhancement of intrinsic motivation in cognitively enhancing interventions may optimize treatment engagement and the likelihood of meaningful training outcomes. Copyright © 2018 Elsevier B.V. All rights reserved.

The processing of raising and nominal control: An eye-tracking study

Directory of Open Access Journals (Sweden)

Patrick eSturt

2015-03-01

Full Text Available According to some views of sentence processing, the memory retrieval processes involved in dependency formation may differ as a function of the type of dependency involved. For example, using closely matched materials in a single experiment Dillon et al (2013 found evidence for retrieval interference in subject-verb agreement, but not in reflexive-antecedent agreement. We report four eye-tracking experiments that examine examine reflexive-antecedent dependencies, combined with raising (e.g. ``John seemed to Tom to be kind to himself...'', or nominal control (e.g. ``John’s agreement with Tom to be kind to himself...''. We hypothesized that dependencies involving raising would (a be processed more quickly, and (b be less subject to retrieval interference, relative to those involving nominal control. This is due to the fact that the interpretation of raising is structurally constrained, while the interpretation of nominal control depends crucially on lexical properties of the control nominal. The results showed evidence of interference when the reflexive-antecedent dependency was mediated by raising or nominal control, but very little evidence that could be interpreted in terms of interference for direct reflexive-antecedent dependencies that did not involve raising or control. However, there was no evidence either for greater interference, or for quicker dependency formation, for raising than for nominal control.

Scoring haemophilic arthropathy on X-rays: improving inter- and intra-observer reliability and agreement using a consensus atlas

Energy Technology Data Exchange (ETDEWEB)

Foppen, Wouter; Schaaf, Irene C. van der; Beek, Frederik J.A. [University Medical Center Utrecht, Department of Radiology (Netherlands); Verkooijen, Helena M. [University Medical Center Utrecht, Department of Radiology (Netherlands); University Medical Center Utrecht, Julius Center for Health Sciences and Primary Care, Utrecht (Netherlands); Fischer, Kathelijn [University Medical Center Utrecht, Julius Center for Health Sciences and Primary Care, Utrecht (Netherlands); University Medical Center Utrecht, Van Creveldkliniek, Department of Hematology, Utrecht (Netherlands)

2016-06-15

The radiological Pettersson score (PS) is widely applied for classification of arthropathy to evaluate costly haemophilia treatment. This study aims to assess and improve inter- and intra-observer reliability and agreement of the PS. Two series of X-rays (bilateral elbows, knees, and ankles) of 10 haemophilia patients (120 joints) with haemophilic arthropathy were scored by three observers according to the PS (maximum score 13/joint). Subsequently, (dis-)agreement in scoring was discussed until consensus. Example images were collected in an atlas. Thereafter, second series of 120 joints were scored using the atlas. One observer rescored the second series after three months. Reliability was assessed by intraclass correlation coefficients (ICC), agreement by limits of agreement (LoA). Median Pettersson score at joint level (PS{sub joint}) of affected joints was 6 (interquartile range 3-9). Using the consensus atlas, inter-observer reliability of the PS{sub joint} improved significantly from 0.94 (95 % confidence interval (CI) 0.91-0.96) to 0.97 (CI 0.96-0.98). LoA improved from ±1.7 to ±1.1 for the PS{sub joint}. Therefore, true differences in arthropathy were differences in the PS{sub joint} of >2 points. Intra-observer reliability of the PS{sub joint} was 0.98 (CI 0.97-0.98), intra-observer LoA were ±0.9 points. Reliability and agreement of the PS improved by using a consensus atlas. (orig.)

76 FR 66057 - North American Electric Reliability Corporation; Order Approving Regional Reliability Standard

Science.gov (United States)

2011-10-25

... Reliability Standard that is necessitated by a physical difference in the Bulk-Power System.\\7\\ \\7\\ Order No... Reliability Standards for the Bulk-Power System, Order No. 693, FERC Stats. & Regs. ] 31,242, order on reh'g... electric system event analyses and thereby improve system reliability by promoting improved system design...

Improving the reliability of fuel Enusa; Mejora de la fiabilidad del combustible en Enusa

Energy Technology Data Exchange (ETDEWEB)

Choithramani, S.; Quecedo, M.

2015-07-01

ENUSA is committed to providing our customers with fuel designs that meet their needs for operational efficiency, power, energy, performance and reliability. ENUSAs current fuel designs, covering BWR and PWR technologies, incorporate highest performance with proven reliability features developed along nuclear power operation history. As of January 2015, ENUSA has manufactured more than 20.000 fuel assemblies (around half BWR and half PWR), with operating conditions reflecting varying reactor power densities, cycle lengths, operating strategies and water chemistry environments. This experience brings the knowledge to model our fuel behavior and acts as the principal instrument to identify and characterize the failure mechanisms of our fuel. Based on the information obtained from all this years of operation, ENUSA has progressively developed and implemented numerous mitigating actions identified upon the knowledge on failure mechanisms, which are the bases for the fuel reliability improvement program. Contemporaneously to this implementation, a positive trend on ENUSA fuel reliability has been observed. (Author)

77 FR 50987 - Environmental Technologies Trade Advisory Committee, Request for Nominations

Science.gov (United States)

2012-08-23

... DEPARTMENT OF COMMERCE International Trade Administration Environmental Technologies Trade... Commerce. ACTION: Solicitation of Nominations for Membership on the Environmental Technologies Trade...) is requesting nominations for memberships on the Environmental Technologies Trade Advisory Committee...

45 CFR 1801.10 - Nomination by institution of higher education.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Nomination by institution of higher education. 1801.10 Section 1801.10 Public Welfare Regulations Relating to Public Welfare (Continued) HARRY S... institution of higher education. To be considered in the competition a student must be nominated by the...

Engineering, maintenance, and initiatives to improve LAMPF beam availability and system reliability

International Nuclear Information System (INIS)

Harris, H.W.; DeHaven, R.A.; Hart, V.E.; Parsons, W.M.; Sturrock, J.C.

1992-01-01

Two different requirements are driving engineering studies and hardware development to improve LAMPF. The first is concerned with component and system improvements to increase beam availability during the LAMPF production cycle. Hardware changes in RF, power supplies, and magnets are being implemented to increase mean time between failure and reduce time to replace or repair failed units. A joint LAMPF-Industry project is on-going to improve reliability of RF components. A component test stand is being refurbished to include significant development capability. The second approach includes several changes that will increase the duty factor of the existing accelerator. Major changes are being evaluated for replacing the front end of the accelerator. Other changes improving the high brightness capability could result in a new performance plateau for LAMPF. 2 refs., 2 figs

Swarm of bees and particles algorithms in the problem of gradual failure reliability assurance

Directory of Open Access Journals (Sweden)

M. F. Anop

2015-01-01

Full Text Available Probability-statistical framework of reliability theory uses models based on the chance failures analysis. These models are not functional and do not reflect relation of reliability characteristics to the object performance. At the same time, a significant part of the technical systems failures are gradual failures caused by degradation of the internal parameters of the system under the influence of various external factors.The paper shows how to provide the required level of reliability at the design stage using a functional model of a technical object. Paper describes the method for solving this problem under incomplete initial information, when there is no information about the patterns of technological deviations and degradation parameters, and the considered system model is a \\black box" one.To this end, we formulate the problem of optimal parametric synthesis. It lies in the choice of the nominal values of the system parameters to satisfy the requirements for its operation and take into account the unavoidable deviations of the parameters from their design values during operation. As an optimization criterion in this case we propose to use a deterministic geometric criterion \\reliability reserve", which is the minimum distance measured along the coordinate directions from the nominal parameter value to the acceptability region boundary rather than statistical values.The paper presents the results of the application of heuristic swarm intelligence methods to solve the formulated optimization problem. Efficiency of particle swarm algorithms and swarm of bees one compared with undirected random search algorithm in solving a number of test optimal parametric synthesis problems in three areas: reliability, convergence rate and operating time. The study suggests that the use of a swarm of bees method for solving the problem of the technical systems gradual failure reliability ensuring is preferred because of the greater flexibility of the

Improving the reliability of fishery predictions under climate change

DEFF Research Database (Denmark)

Brander, Keith

2015-01-01

The increasing number of publications assessing impacts of climate change on marine ecosystems and fisheries attests to rising scientific and public interest. A selection of recent papers, dealing more with biological than social and economic aspects, is reviewed here, with particular attention...... to the reliability of projections of climate impacts on future fishery yields. The 2014 Intergovernmental Panel on Climate Change (IPCC) report expresses high confidence in projections that mid- and high-latitude fish catch potential will increase by 2050 and medium confidence that low-latitude catch potential...... understanding of climate impacts, such as how to improve coupled models from physics to fish and how to strengthen confidence in analysis of time series...

Assessing motivation for work environment improvements: internal consistency, reliability and factorial structure.

Science.gov (United States)

Hedlund, Ann; Ateg, Mattias; Andersson, Ing-Marie; Rosén, Gunnar

2010-04-01

Workers' motivation to actively take part in improvements to the work environment is assumed to be important for the efficiency of investments for that purpose. That gives rise to the need for a tool to measure this motivation. A questionnaire to measure motivation for improvements to the work environment has been designed. Internal consistency and test-retest reliability of the domains of the questionnaire have been measured, and the factorial structure has been explored, from the answers of 113 employees. The internal consistency is high (0.94), as well as the correlation for the total score (0.84). Three factors are identified accounting for 61.6% of the total variance. The questionnaire can be a useful tool in improving intervention methods. The expectation is that the tool can be useful, particularly with the aim of improving efficiency of companies' investments for work environment improvements. Copyright 2010 Elsevier Ltd. All rights reserved.

Utilizing clad piping to improve process plant piping integrity, reliability, and operations

International Nuclear Information System (INIS)

Chakravarti, B.

1996-01-01

During the past four years carbon steel piping clad with type 304L (UNS S30403) stainless steel has been used to solve the flow accelerated corrosion (FAC) problem in nuclear power plants with exceptional success. The product is designed to allow ''like for like'' replacement of damaged carbon steel components where the carbon steel remains the pressure boundary and type 304L (UNS S30403) stainless steel the corrosion allowance. More than 3000 feet of piping and 500 fittings in sizes from 6 to 36-in. NPS have been installed in the extraction steam and other lines of these power plants to improve reliability, eliminate inspection program, reduce O and M costs and provide operational benefits. This concept of utilizing clad piping in solving various corrosion problems in industrial and process plants by conservatively selecting a high alloy material as cladding can provide similar, significant benefits in controlling corrosion problems, minimizing maintenance cost, improving operation and reliability to control performance and risks in a highly cost effective manner. This paper will present various material combinations and applications that appear ideally suited for use of the clad piping components in process plants

Application of reliability based design concepts to transmission line structure foundations. Part 2

International Nuclear Information System (INIS)

DiGioia, A.M. Jr.; Rojas-Gonzalez, L.F.

1991-01-01

The application of reliability based design (RBD) methods to transmission line structure foundations has developed somewhat more slowly than that for the other structural components in line systems. In a previous paper, a procedure was proposed for the design of transmission line structures foundations using a probability based load and resistance factor design (LRFD) format. This procedure involved the determination of a foundation strength factor, φ F , which was used as a multiplier of the calculated nominal design strength to estimate the five percent exclusion limit strength required in the calculated nominal design strength to estimate the five percent exclusion limit strength required in the LRFD equation. Statistical analyses of results from full-scale load tests were used to obtain φ F values applicable to various nominal design strength equations and for drilled shafts subjected to uplift loads. These results clearly illustrated the significant economic benefits of conducting more detailed subsurface investigations for the design of transmission line structure foundations. A design example was also presented. In this paper the proposed procedure is extended to laterally load drilled shafts

The Small Aircraft Transportation System (SATS), Higher Volume Operations (HVO) Off-Nominal Operations

Science.gov (United States)

Baxley, B.; Williams, D.; Consiglio, M.; Conway, S.; Adams, C.; Abbott, T.

2005-01-01

The ability to conduct concurrent, multiple aircraft operations in poor weather, at virtually any airport, offers an important opportunity for a significant increase in the rate of flight operations, a major improvement in passenger convenience, and the potential to foster growth of charter operations at small airports. The Small Aircraft Transportation System, (SATS) Higher Volume Operations (HVO) concept is designed to increase traffic flow at any of the 3400 nonradar, non-towered airports in the United States where operations are currently restricted to one-in/one-out procedural separation during Instrument Meteorological Conditions (IMC). The concept's key feature is pilots maintain their own separation from other aircraft using procedures, aircraft flight data sent via air-to-air datalink, cockpit displays, and on-board software. This is done within the Self-Controlled Area (SCA), an area of flight operations established during poor visibility or low ceilings around an airport without Air Traffic Control (ATC) services. The research described in this paper expands the HVO concept to include most off-nominal situations that could be expected to occur in a future SATS environment. The situations were categorized into routine off-nominal operations, procedural deviations, equipment malfunctions, and aircraft emergencies. The combination of normal and off-nominal HVO procedures provides evidence for an operational concept that is safe, requires little ground infrastructure, and enables concurrent flight operations in poor weather.

Russian nominal semantics and morphology

DEFF Research Database (Denmark)

Nørgård-Sørensen, Jens

The principal idea behind this book is that lexis and grammar make up a single coherent structure. It is shown that the grammatical patterns of the different classes of Russian nominals are closely interconnected. They can be described as reflecting a limited set of semantic distinctions which ar...... or weaker, of Russian. Students will see a pattern in what is traditionally described as disparate subsystems, and linguists may be inspired to consider the theoretical points concerning language as a coherent system, determining usage.......The principal idea behind this book is that lexis and grammar make up a single coherent structure. It is shown that the grammatical patterns of the different classes of Russian nominals are closely interconnected. They can be described as reflecting a limited set of semantic distinctions which...... are also rooted in the lexical-semantic classification of Russian nouns. The presentation focuses on semantics, both lexical and grammatical, and not least the connection between these two levels of content. The principal theoretical impact is the insight that grammar and lexis should not be seen...

How Case-Based Reasoning on e-Community Knowledge Can Be Improved Thanks to Knowledge Reliability

OpenAIRE

Gaillard , Emmanuelle; Lieber , Jean; Nauer , Emmanuel; Cordier , Amélie

2014-01-01

International audience; This paper shows that performing case-based reasoning (CBR) on knowledge coming from an e-community is improved by taking into account knowledge reliability. MKM (meta-knowledge model) is a model for managing reliability of the knowledge units that are used in the reasoning process. For this, MKM uses meta-knowledge such as belief, trust and reputation, about knowledge units and users. MKM is used both to select relevant knowledge to conduct the reasoning process, and ...

76 FR 76732 - Nominations to the Advisory Committee on Blood Safety and Availability

Science.gov (United States)

2011-12-08

... individuals will be nominated to the Secretary of HHS for consideration of appointment as members of the ACBSA..., Associate Public Health Advisor for Blood, Organ and Tissue Safety Policy, Department of Health and Human.... Nominations In accordance with the charter, persons nominated for appointment as members of the ACBSA should...

76 FR 5424 - Motor Carrier Safety Advisory Committee; Request for Nominations

Science.gov (United States)

2011-01-31

... DEPARTMENT OF TRANSPORTATION Federal Motor Carrier Safety Administration [Docket No. FMCSA-2006-26367] Motor Carrier Safety Advisory Committee; Request for Nominations AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION: Request for Nominations to the Motor Carrier Safety Advisory...

Improvement of human reliability analysis method for PRA

International Nuclear Information System (INIS)

Tanji, Junichi; Fujimoto, Haruo

2013-09-01

It is required to refine human reliability analysis (HRA) method by, for example, incorporating consideration for the cognitive process of operator into the evaluation of diagnosis errors and decision-making errors, as a part of the development and improvement of methods used in probabilistic risk assessments (PRAs). JNES has been developed a HRA method based on ATHENA which is suitable to handle the structured relationship among diagnosis errors, decision-making errors and operator cognition process. This report summarizes outcomes obtained from the improvement of HRA method, in which enhancement to evaluate how the plant degraded condition affects operator cognitive process and to evaluate human error probabilities (HEPs) which correspond to the contents of operator tasks is made. In addition, this report describes the results of case studies on the representative accident sequences to investigate the applicability of HRA method developed. HEPs of the same accident sequences are also estimated using THERP method, which is most popularly used HRA method, and comparisons of the results obtained using these two methods are made to depict the differences of these methods and issues to be solved. Important conclusions obtained are as follows: (1) Improvement of HRA method using operator cognitive action model. Clarification of factors to be considered in the evaluation of human errors, incorporation of degraded plant safety condition into HRA and investigation of HEPs which are affected by the contents of operator tasks were made to improve the HRA method which can integrate operator cognitive action model into ATHENA method. In addition, the detail of procedures of the improved method was delineated in the form of flowchart. (2) Case studies and comparison with the results evaluated by THERP method. Four operator actions modeled in the PRAs of representative BWR5 and 4-loop PWR plants were selected and evaluated as case studies. These cases were also evaluated using

Technologies for improving the availability and reliability of current and future water cooled nuclear power plants. Proceedings of a technical committee meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-11-01

One of the activities of the IAEA is to provide all Member States with an international source of balanced, objective information on advanced in technology for water cooled reactors. Since the global nuclear industry has a common interest in improving plant availability and reliability to assure specific individual plant and country perspective as well as to have an image of well managed competitive industry, the IAEA held a Technical Committee Meeting on Technologies for Improving the Availability and Reliability of Current and Future Water Cooled Nuclear Power Plants in September 1997. The basic aim to was to identify, review and exchange information on international developments in technologies for achieving high availability and reliability and to suggest areas where further technical advances could contribute to improvement of performance. Designs for future plants were presented in the context of how they can accommodate both the organizational and technical means for reaching even higher levels of performance. This proceedings contains the contributed papers presented at this Meeting each with a separate abstract. Four sessions were concerned with: policies, practices and procedures for achieving high reliability and availability; improving availability and reliability through better use of today`s technologies; recent advances in technologies for improving availability and reliability; achieving high availability for new plants Refs, figs, tabs

Technologies for improving the availability and reliability of current and future water cooled nuclear power plants. Proceedings of a technical committee meeting

International Nuclear Information System (INIS)

1998-11-01

One of the activities of the IAEA is to provide all Member States with an international source of balanced, objective information on advanced in technology for water cooled reactors. Since the global nuclear industry has a common interest in improving plant availability and reliability to assure specific individual plant and country perspective as well as to have an image of well managed competitive industry, the IAEA held a Technical Committee Meeting on Technologies for Improving the Availability and Reliability of Current and Future Water Cooled Nuclear Power Plants in September 1997. The basic aim to was to identify, review and exchange information on international developments in technologies for achieving high availability and reliability and to suggest areas where further technical advances could contribute to improvement of performance. Designs for future plants were presented in the context of how they can accommodate both the organizational and technical means for reaching even higher levels of performance. This proceedings contains the contributed papers presented at this Meeting each with a separate abstract. Four sessions were concerned with: policies, practices and procedures for achieving high reliability and availability; improving availability and reliability through better use of today's technologies; recent advances in technologies for improving availability and reliability; achieving high availability for new plants

Targeting nominal income growth or inflation?

DEFF Research Database (Denmark)

Jensen, Henrik

2002-01-01

Within a simple New Keynesian model emphasizing forward-looking behavior of private agents, I evaluate optimal nominal income growth targeting versus optimal inflation targeting. When the economy is mainly subject to shocks that do not involve monetary policy trade-offs for society, inflation...

Regular and context-free nominal traces

DEFF Research Database (Denmark)

Degano, Pierpaolo; Ferrari, Gian-Luigi; Mezzetti, Gianluca

2017-01-01

Two kinds of automata are presented, for recognising new classes of regular and context-free nominal languages. We compare their expressive power with analogous proposals in the literature, showing that they express novel classes of languages. Although many properties of classical languages hold ...

Gout and comorbidity: a nominal group study of people with gout.

Science.gov (United States)

Singh, Jasvinder A

2017-09-15

Comorbidities are common in patients with gout, yet qualitative research is lacking. The study objective was to examine the impact of gout on comorbidities. Nine nominal groups were conducted. Patients with gout discussed and rank-ordered their concerns in response to the question, "How does gout or its treatment affect your other conditions and their treatment?" Nine nominal groups had 45 gout patients, with mean age 61 years (standard deviation (SD) 10.7) and mean gout duration 14.9 years (SD 12). Of these, 62% were men, 45% African-American, 51% married and 63% were currently using allopurinol. The most frequently cited highly ranked concerns among the nine nominal groups were: (1) interaction of gout medication with medications for other medical conditions (three groups); (2) worsening of other medical comorbidities, including hospitalizations (seven groups); (3) worsening of anxiety and depression (three groups); (4) significant dietary changes for gout that contrasted with diet for other conditions (three groups); (5) new diseases diagnosed due to gout (three groups); (6) irreversible joint damage (three groups); (7) inability to exercise and weight gain (four groups); and (8) gout misdiagnosed as another health condition (three groups). Other domains ranked highly were: (1) impact of gout on daily life and activities, including the ability to work and social activities (six groups); (2) medication side effects, real and perceived (nine groups); (3) weight loss due to gout related to frequent flares (one group); and (4) cost and burden (three groups). Gout and the medications used for its treatment have a significant effect on comorbidities and their management. These findings provide insights into potential targets for improving outcomes in patients with gout.

Membership nominations in international scientific assessments

Science.gov (United States)

Leifeld, Philip; Fisher, Dana R.

2017-10-01

International scientific assessments are transnational knowledge-based expert networks with a mandate to advise policymakers. A well-known example is the Millennium Ecosystem Assessment (MA), which synthesized research on ecosystem services between 2001 and 2005, utilizing the knowledge of 1,360 expert members. Little, however, is known about the membership composition and the driving forces behind membership nominations in the MA and similar organizations. Here we introduce a survey data set on recruitment in the MA and analyse nomination patterns among experts as a complex network. The results indicate that membership recruitment was governed by prior contacts in other transnational elite organizations and a range of other factors related to personal affinity. Network analysis demonstrates how some core individuals were particularly influential in shaping the overall membership composition of the group. These findings add to recently noted concerns about the lack of diversity of views represented in international scientific assessments.

Human factor reliability program

International Nuclear Information System (INIS)

Knoblochova, L.

2017-01-01

The human factor's reliability program was at Slovenske elektrarne, a.s. (SE) nuclear power plants. introduced as one of the components Initiatives of Excellent Performance in 2011. The initiative's goal was to increase the reliability of both people and facilities, in response to 3 major areas of improvement - Need for improvement of the results, Troubleshooting support, Supporting the achievement of the company's goals. The human agent's reliability program is in practice included: - Tools to prevent human error; - Managerial observation and coaching; - Human factor analysis; -Quick information about the event with a human agent; -Human reliability timeline and performance indicators; - Basic, periodic and extraordinary training in human factor reliability(authors)

Engineering, maintenance, and new initiatives to improve LAMPF beam availability and system reliability

International Nuclear Information System (INIS)

Harris, H.W.; DeHaven, R.A.; Hart, V.E.; Parsons, W.M.; Sturrock, J.C.

1992-01-01

Two different requirements are driving engineering studies and hardware development to improve LAMPF. The first is concerned with component and system improvements to increase beam availability during the LAMPF production cycle. Hardware changes in RF, power supplies, and magnets are being implemented to increase mean time between failure and reduce time to replace or repair failed units. A joint LAMPF-Industry project is on-going to improve reliability of RF components. A component test stand is being refurbished to include significant development capability. The second approach includes several changes that will increase the duty factor of the existing accelerator. Major changes are being evaluated for replacing the front end of the accelerator. Other changes improving high brightness capability could result in a new performance plateau for LAMPF

Characteristics Leading Teachers to Nominate Secondary Students as Gifted in Spain

Science.gov (United States)

Hernandez-Torrano, Daniel; Prieto, Maria Dolores; Ferrandiz, Carmen; Bermejo, Rosario; Sainz, Marta

2013-01-01

What are the characteristics leading teachers to nominate gifted students in Spain? To answer this question, several demographic (i.e., gender, grade) and psychological (i.e., multiple intelligences, emotional intelligence, intellectual aptitude, and divergent thinking) characteristics of 563 secondary students nominated as gifted by their…

Rational optimization of reliability and safety policies

International Nuclear Information System (INIS)

Melchers, Robert E.

2001-01-01

Optimization of structures for design has a long history, including optimization using numerical methods and optimality criteria. Much of this work has considered a subset of the complete design optimization problem--that of the technical issues alone. The more general problem must consider also non-technical issues and, importantly, the interplay between them and the parameters which influence them. Optimization involves optimal setting of design or acceptance criteria and, separately, optimal design within the criteria. In the modern context of probability based design codes this requires probabilistic acceptance criteria. The determination of such criteria involves more than the nominal code failure probability approach used for design code formulation. A more general view must be taken and a clear distinction must be made between those matters covered by technical reliability and non-technical reliability. The present paper considers this issue and outlines a framework for rational optimization of structural and other systems given the socio-economic and political systems within which optimization must be performed

Substation design improvement with a probabilistic reliability approach using the TOPASE program

Energy Technology Data Exchange (ETDEWEB)

Bulot, M.; Heroin, G.; Bergerot, J-L.; Le Du, M. [Electricite de France (France)

1997-12-31

TOPASE, (the French acronym for Probabilistic Tools and Data Processing for the Analysis of Electric Systems), developed by Electricite de France (EDF) to perform reliability studies on transmission substations, was described. TOPASE serves a dual objective of assisting in the automation of HV substation studies, as well as enabling electrical systems experts who are not necessarily specialists in reliability studies to perform such studies. The program is capable of quantifying the occurrence rate of undesirable events and of identifying critical equipment and the main incident scenarios. The program can be used to improve an existing substation, to choose an HV structure during the design stage, or to choose a system of protective devices. Data collected during 1996 and 1997 will be analyzed to identify useful experiences and to validate the basic concepts of the program. 4 figs.

software reliability: failures, consequences and improvement

African Journals Online (AJOL)

BARTH EKWUEME

2009-07-16

Jul 16, 2009 ... function of time, but it is believed that some modeling technique for software reliability is reaching propensity, by ..... February 25, 1991 during the Gulf war, the chopping ... Let us consider a few key concepts that apply to both.

30 CFR 285.706 - How do I nominate a CVA for MMS approval?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I nominate a CVA for MMS approval? 285..., Fabrication, and Installation Certified Verification Agent § 285.706 How do I nominate a CVA for MMS approval... (§ 285.610(a)(9)) or GAP (§ 285.645(c)(5)), you must nominate a CVA for MMS approval. You must specify...

78 FR 68838 - National Drinking Water Advisory Council; Request for Nominations

Science.gov (United States)

2013-11-15

... may nominate qualified individuals for membership. The EPA values and welcomes diversity. In an effort..., position, current business address, and email and telephone number. Interested candidates may self-nominate... ``Ethics Requirements for Advisors'' link on the EPA NDWAC Web site, http://water.epa.gov/drink/ndwac/fact...

Follow-up of CT-derived airway wall thickness: Correcting for changes in inspiration level improves reliability

Energy Technology Data Exchange (ETDEWEB)

Pompe, Esther, E-mail: e.pompe@umcutrecht.nl [Department of Respiratory Medicine, University Medical Center Utrecht, Utrecht (Netherlands); Rikxoort, Eva M. van [Department of Radiology, Radboud University Medical Center, Nijmegen (Netherlands); Mets, Onno M. [Department of Radiology, University Medical Center Utrecht, Utrecht (Netherlands); Charbonnier, Jean-Paul [Department of Radiology, Radboud University Medical Center, Nijmegen (Netherlands); Kuhnigk, Jan-Martin [Institute for Medical Image Computing, Fraunhofer MEVIS, Bremen (Germany); Koning, Harry J. de [Department of Public Health, Erasmus Medical Center, Rotterdam (Netherlands); Oudkerk, Matthijs [University of Groningen, University Medical Center Groningen, Groningen, Department of Radiology (Netherlands); Vliegenthart, Rozemarijn [University of Groningen, University Medical Center Groningen, Groningen, Department of Radiology (Netherlands); University of Groningen, University Medical Center Groningen, Center for Medical Imaging-North East Netherlands, Groningen (Netherlands); Zanen, Pieter; Lammers, Jan-Willem J. [Department of Respiratory Medicine, University Medical Center Utrecht, Utrecht (Netherlands); Ginneken, Bram van [Department of Radiology, Radboud University Medical Center, Nijmegen (Netherlands); Jong, Pim A. de; Mohamed Hoesein, Firdaus A.A. [Department of Radiology, University Medical Center Utrecht, Utrecht (Netherlands)

2016-11-15

Objectives: Airway wall thickness (AWT) is affected by changes in lung volume. This study evaluated whether correcting AWT on computed tomography (CT) for differences in inspiration level improves measurement agreement, reliability, and power to detect changes over time. Methods: Participants of the Dutch-Belgian lung cancer screening trial who underwent 3-month repeat CT for an indeterminate pulmonary nodule were included. AWT on CT was calculated by the square root of the wall area at a theoretical airway with an internal perimeter of 10 mm (Pi10). The scan with the highest lung volume was labelled as the reference scan and the scan with the lowest lung volume was labelled as the comparison scan. Pi10 derived from the comparison scan was corrected by multiplying it with the ratio of CT lung volume of the comparison scan to CT lung volume on the reference scan. Agreement of uncorrected and corrected Pi10 was studied with the Bland-Altman method, reliability with intra-class correlation coefficients (ICC), and power to detect changes over time was calculated. Results: 315 male participants were included. Limit of agreement and reliability for Pi10 was −0.61 to 0.57 mm (ICC = 0.87), which improved to −0.38 to 0.37 mm (ICC = 0.94) after correction for inspiration level. To detect a 15% change over 3 months, 71 subjects are needed for Pi10 and 26 subjects for Pi10 adjusted for inspiration level. Conclusions: Correcting Pi10 for differences in inspiration level improves reliability, agreement, and power to detect changes over time.

78 FR 31939 - Solicitation of Nominations for Membership on the National Vaccine Advisory Committee

Science.gov (United States)

2013-05-28

...., Public Health Advisor, National Vaccine Program Office, Department of Health and Human Services, 200... vacated during the calendar year 2013. Nominations In accordance with the charter, persons nominated for... information should be included in the package of material submitted for each individual being nominated for...

76 FR 71566 - Solicitation of Nominations for Membership on the National Vaccine Advisory Committee

Science.gov (United States)

2011-11-18

...., Public Health Advisor, National Vaccine Program Office, Department of Health and Human Services, 200... vacated during the calendar year 2012. Nominations In accordance with the charter, persons nominated for... information should be included in the package of material submitted for each individual being nominated for...

2017 NREL Photovoltaic Reliability Workshop

Energy Technology Data Exchange (ETDEWEB)

Kurtz, Sarah [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-08-15

NREL's Photovoltaic (PV) Reliability Workshop (PVRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology -- both critical goals for moving PV technologies deeper into the electricity marketplace.

Screening, sensitivity, and uncertainty for the CREAM method of Human Reliability Analysis

International Nuclear Information System (INIS)

Bedford, Tim; Bayley, Clare; Revie, Matthew

2013-01-01

This paper reports a sensitivity analysis of the Cognitive Reliability and Error Analysis Method for Human Reliability Analysis. We consider three different aspects: the difference between the outputs of the Basic and Extended methods, on the same HRA scenario; the variability in outputs through the choices made for common performance conditions (CPCs); and the variability in outputs through the assignment of choices for cognitive function failures (CFFs). We discuss the problem of interpreting categories when applying the method, compare its quantitative structure to that of first generation methods and discuss also how dependence is modelled with the approach. We show that the control mode intervals used in the Basic method are too narrow to be consistent with the Extended method. This motivates a new screening method that gives improved accuracy with respect to the Basic method, in the sense that (on average) halves the uncertainty associated with the Basic method. We make some observations on the design of a screening method that are generally applicable in Risk Analysis. Finally, we propose a new method of combining CPC weights with nominal probabilities so that the calculated probabilities are always in range (i.e. between 0 and 1), while satisfying sensible properties that are consistent with the overall CREAM method

24 CFR 598.510 - Nominations by Economic Development Corporations or the District of Columbia.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Nominations by Economic Development... ZONES: ROUND TWO AND THREE DESIGNATIONS Special Rules § 598.510 Nominations by Economic Development Corporations or the District of Columbia. Any urban area nominated by an Economic Development Corporation...

Use of Human Reliability Insights to Improve Decision-Making

International Nuclear Information System (INIS)

Julius, J. A.; Moieni, P.; Grobbelaar, J.; Kohlhepp, K.

2016-01-01

This paper describes the use of insights obtained during the development and application of human reliability analysis (HRA) as part of a probabilistic risk assessment (PRA) to support decision-making, including improvements to operations, training, and safety culture. Insights have been gained from the development and application of HRA as part of a PRA for nuclear power plants in the USA, Europe and Asia over the last two decades. These models consist of Level 1 and Level 2 PRA models of internal and external events, during full power and shutdown modes of plant operation. These insights include the use of human factors information to improve the qualitative portion of the HRA. The subsequent quantification in the HRA effectively prioritises the contributors to the unreliability of operator actions, and the process facilitates the identification of the factors that are important to the success of the operator actions. Additionally, the tools and techniques also allow for the evaluation of key assumptions and sources of uncertainty. The end results have been used to effectively support decision-making for day-to-day plant operations as well as licensing issues. HRA results have been used to provide feedback and improvements to plant procedures, operator training and other areas contributing the plant safety culture. Examples of the types of insights are presented in this paper. (author)

The Children's Play Therapy Instrument (CPTI): Description, Development, and Reliability Studies

Science.gov (United States)

Kernberg, Paulina F.; Chazan, Saralea E.; Normandin, Lina

1998-01-01

The Children's Play Therapy Instrument (CPTI), its development, and reliability studies are described. The CPTI is a new instrument to examine a child's play activity in individual psychotherapy. Three independent raters used the CPTI to rate eight videotaped play therapy vignettes. Results were compared with the authors' consensual scores from a preliminary study. Generally good to excellent levels of interrater reliability were obtained for the independent raters on intraclass correlation coefficients for ordinal categories of the CPTI. Likewise, kappa levels were acceptable to excellent for nominal categories of the scale. The CPTI holds promise to become a reliable measure of play activity in child psychotherapy. Further research is needed to assess discriminant validity of the CPTI for use as a diagnostic tool and as a measure of process and outcome.(The Journal of Psychotherapy Practice and Research 1998; 7:196–207) PMID:9631341

77 FR 64113 - National Drinking Water Advisory Council: Request for Nominations

Science.gov (United States)

2012-10-18

... person and/or organization may nominate qualified individuals for membership. The EPA values and welcomes..., current business address, and email and telephone number. Interested candidates may self-nominate. The DFO... Requirements for Advisors'' link on the OGWDW NDWAC Web site, http://water.epa.gov/drink/ndwac/fact.cfm . Other...

Reducing variability of workforce as a tool to improve plan reliability

DEFF Research Database (Denmark)

Wandahl, Søren; Yicheng, S.; Zygmunt, K. J.

Variability of flow is recognized as the greatest obstacle to production management. Since the work flow and labour flow are two dominators of work performance, it is important to manage them simultaneously. The objective of this paper is to examine whether by reducing the variance of a labour flow......, a plan reliability can be improved, therefore, three different construction labour data sets have been examined by utilizing Monte Carlo Simulation, to analyze the probability to finish simulated projects within a certain time. The research findings revealed that reducing variance in the workforce flow...... does not necessarily shorten the project length, nevertheless it increases probability to finish the tasks within a critical path duration. Additionally, it was concluded, that reducing the variance of crew allocation can improve the productivity....

Improving Electronic Sensor Reliability by Robust Outlier Screening

Directory of Open Access Journals (Sweden)

Federico Cuesta

2013-10-01

Full Text Available Electronic sensors are widely used in different application areas, and in some of them, such as automotive or medical equipment, they must perform with an extremely low defect rate. Increasing reliability is paramount. Outlier detection algorithms are a key component in screening latent defects and decreasing the number of customer quality incidents (CQIs. This paper focuses on new spatial algorithms (Good Die in a Bad Cluster with Statistical Bins (GDBC SB and Bad Bin in a Bad Cluster (BBBC and an advanced outlier screening method, called Robust Dynamic Part Averaging Testing (RDPAT, as well as two practical improvements, which significantly enhance existing algorithms. Those methods have been used in production in Freescale® Semiconductor probe factories around the world for several years. Moreover, a study was conducted with production data of 289,080 dice with 26 CQIs to determine and compare the efficiency and effectiveness of all these algorithms in identifying CQIs.

Developing Predictive Maintenance Expertise to Improve Plant Equipment Reliability

International Nuclear Information System (INIS)

Wurzbach, Richard N.

2002-01-01

On-line equipment condition monitoring is a critical component of the world-class production and safety histories of many successful nuclear plant operators. From addressing availability and operability concerns of nuclear safety-related equipment to increasing profitability through support system reliability and reduced maintenance costs, Predictive Maintenance programs have increasingly become a vital contribution to the maintenance and operation decisions of nuclear facilities. In recent years, significant advancements have been made in the quality and portability of many of the instruments being used, and software improvements have been made as well. However, the single most influential component of the success of these programs is the impact of a trained and experienced team of personnel putting this technology to work. Changes in the nature of the power generation industry brought on by competition, mergers, and acquisitions, has taken the historically stable personnel environment of power generation and created a very dynamic situation. As a result, many facilities have seen a significant turnover in personnel in key positions, including predictive maintenance personnel. It has become the challenge for many nuclear operators to maintain the consistent contribution of quality data and information from predictive maintenance that has become important in the overall equipment decision process. These challenges can be met through the implementation of quality training to predictive maintenance personnel and regular updating and re-certification of key technology holders. The use of data management tools and services aid in the sharing of information across sites within an operating company, and with experts who can contribute value-added data management and analysis. The overall effectiveness of predictive maintenance programs can be improved through the incorporation of newly developed comprehensive technology training courses. These courses address the use of

75 FR 61751 - National Drinking Water Advisory Council: Request for Nominations

Science.gov (United States)

2010-10-06

... nominations on or before October 31, 2010. ADDRESSES: The preferred form of communication is via e-mail to...) while attending meetings. The Council holds two face-to-face meetings each year, generally in the spring... Protection Agency (EPA or Agency) invites all interested persons to nominate qualified individuals to serve a...

75 FR 60459 - National Committee on Vital and Health Statistics; Nominations

Science.gov (United States)

2010-09-30

... be made without discrimination on the basis of age, race, gender, sexual orientation, HIV status... nominations is close of business, October 22, 2010. Nominations should be sent to the person named below... anniversary this year, provides advice and assistance to the Department on a variety of key health data issues...

Moral disengagement in self-reported and peer-nominated school bullying

DEFF Research Database (Denmark)

Obermann, Marie-Louise

2011-01-01

. Discrepancies between self-reported and peer-nominated bullying involvement indicates that a person’s social reputation has a stronger association with moral disengagement than so far expected. Implications are discussed, highlighting the importance of further research and theory development.......This study examined the relation between moral disengagement and different self-reported and peer-nominated positions in school bullying. The aims of this study were to (1) investigate moral disengagement among children for whom self-reported and peernominated bully status diverged and (2) compare...... levels of disengagement among self-reported and peer-nominated pure bullies, pure victims, bully–victims, and children not involved in bullying. A sample of 739 Danish sixth grade and seventh grade children (mean age 12.6) was included in the study. Moral disengagement was measured using a Danish version...

Call for petition nominations for 1996-1998 Elections

Science.gov (United States)

The nominees listed below are those of the Union and Section nominating committees and have been approved by the AGU Council.Additional nominations may be made by membership petition. All nominees must be Members or Fellows of the Union. Each petition must be accompanied by a letter in which the proposed nominee agrees to be a candidate and to serve if elected. There are no age, nationality, residence, or other analogous restrictions on who may serve as an officer. Petitions should be sent to the General Secretary, American Geophysical Union, 2000 Florida Avenue NW, Washington, DC 20009. They must be received no later than July 21, 1995.

STUDIES ON IGBT MODULE TO IMPROVE THE RELIABILITY OF POWER ELECTRONIC SYSTEMS

DEFF Research Database (Denmark)

Choi, Uimin

component level to converter level. It is divided into two main parts: the first part, which consists of Chapters 2 and 3, is reliability studies of the IGBT module regarding thermal stresses and the second part, composed of Chapters 4 and 5, discusses strategies to improve the reliability and availability...... are presented. Then, in Chapter 3, the effect of junction temperature swing duration t△Tj on the lifetime of the transfer molded Intelligent Power IGBT Module is investigated and modeled based on the power cycling test results. In addition, the physics-of-failure analysis results of the tested modules...... are presented. Finally, in Chapters 4 and 5, open-circuit fault detection and fault-tolerant control methods are proposed for two kinds of neutral-point clamped three-level inverters T-type and NPC inverters. One of main contributions in this project is the development of an apparatus and methodology...

Improved reliability of power modules

DEFF Research Database (Denmark)

Baker, Nick; Liserre, Marco; Dupont, Laurent

2014-01-01

Power electronic systems play an increasingly important role in providing high-efficiency power conversion for adjustable-speed drives, power-quality correction, renewable-energy systems, energy-storage systems, and electric vehicles. However, they are often presented with demanding operating...... environments that challenge the reliability aspects of power electronic techniques. For example, increasingly thermally stressful environments are seen in applications such as electric vehicles, where ambient temperatures under the hood exceed 150 °C, while some wind turbine applications can place large...

Social Anxiety and Sociometric Nomination in Spanish Students of Compulsory Secondary Education.

Science.gov (United States)

Delgado, Beatriz; Inglés, Cándido J; Aparisi, David; García-Fernández, José M

2016-07-18

Adolescents with social anxiety can manifest great interference in their relationship with classmates and other peers, as well as in their school performance. The aim of this study was to analyze the sociometric nominations and assessment of students with high social anxiety by their peers and teachers, and to determine whether these assessments differ significantly between evaluators (peers vs. teachers), in a sample of 2022 (51.1% male) Spanish adolescents aged between 12 and 16 years. Social anxiety was assessed using the Social Phobia and Anxiety Inventory questionnaire. Sociometric identification and assessment of various educational aspects of the students was performed through the Socio program and Teacher assessment scales, respectively. Results show that students with high social anxiety were nominated by peers as popular, rejected and neglected with the same frequency and proportionately less nominated as leaders, friendly, cooperative, and quarrelsome students than those without high social anxiety (d .97). Finally, peers significantly nominated students with high social anxiety more as leaders, cooperative, quarrelsome, obedient and good students than their teachers (d social anxiety are valued and nominated by their peers and teachers differently.

Friendship Satisfaction in Children with Autism Spectrum Disorder and Nominated Friends

Science.gov (United States)

Petrina, Neysa; Carter, Mark; Stephenson, Jennifer; Sweller, Naomi

2017-01-01

The current study examined the level of friendship satisfaction of children with autism spectrum disorder (ASD) and their nominated friends (with and without diagnosis of ASD). A total of 77 target children with ASD and friends from 49 nominated friendships participated in the study. Relatively high levels of friendship satisfaction were reported…

Improved Iterative Hard- and Soft-Reliability Based Majority-Logic Decoding Algorithms for Non-Binary Low-Density Parity-Check Codes

Science.gov (United States)

Xiong, Chenrong; Yan, Zhiyuan

2014-10-01

Non-binary low-density parity-check (LDPC) codes have some advantages over their binary counterparts, but unfortunately their decoding complexity is a significant challenge. The iterative hard- and soft-reliability based majority-logic decoding algorithms are attractive for non-binary LDPC codes, since they involve only finite field additions and multiplications as well as integer operations and hence have significantly lower complexity than other algorithms. In this paper, we propose two improvements to the majority-logic decoding algorithms. Instead of the accumulation of reliability information in the existing majority-logic decoding algorithms, our first improvement is a new reliability information update. The new update not only results in better error performance and fewer iterations on average, but also further reduces computational complexity. Since existing majority-logic decoding algorithms tend to have a high error floor for codes whose parity check matrices have low column weights, our second improvement is a re-selection scheme, which leads to much lower error floors, at the expense of more finite field operations and integer operations, by identifying periodic points, re-selecting intermediate hard decisions, and changing reliability information.

A study of operational and testing reliability in software reliability analysis

International Nuclear Information System (INIS)

Yang, B.; Xie, M.

2000-01-01

Software reliability is an important aspect of any complex equipment today. Software reliability is usually estimated based on reliability models such as nonhomogeneous Poisson process (NHPP) models. Software systems are improving in testing phase, while it normally does not change in operational phase. Depending on whether the reliability is to be predicted for testing phase or operation phase, different measure should be used. In this paper, two different reliability concepts, namely, the operational reliability and the testing reliability, are clarified and studied in detail. These concepts have been mixed up or even misused in some existing literature. Using different reliability concept will lead to different reliability values obtained and it will further lead to different reliability-based decisions made. The difference of the estimated reliabilities is studied and the effect on the optimal release time is investigated

Satellite power system (SPS). Rectenna siting: availability and distribution of nominally eligible sites

Energy Technology Data Exchange (ETDEWEB)

1980-11-01

Siting of 60 ground receiving stations (rectennas) for the SPS may pose a problem due to the large area per rectenna (15,000 hectares, 38,000 acres) and numerous siting constraints. This study analyzes areas potentially eligible for rectenna sites by mapping, at a national scale, those conditions which would preclude rectenna construction. These exclusion variables which reflect restricted lands, topography, safety, national policy and electromagnetic (microwave) effects, have been computer encoded and tabulated. Subsequent analysis of the nine electric power planning regions that make up the contiguous states indicate an apparently adequate number of nominally eligible sites in all regions in comparison to projected electrical generation. Eligibility in this context means only that areas were not excluded in this national level analysis; more detailed investigation may reveal purely local constraints or smaller scale exclusions. A second major qualification relates to small isolated eligible areas. Eliminating individual eligible clusters with less than nine times the area of one rectenna eliminates much of the Eastern US; a four-to-one adjacent eligible area test poses no such problem. An independant study of the placement of 60 nominal sites in relation to projected load centers reveals that, even with modest transmission distances, the supply of eligible areas is not a key constraint, except perhaps in the Mid-Atlantic (Electric Reliability) Council Region. Even when several less critical (potential) exclusions are considered, more than 19% of the US is eligible; every region except Mid-Atlantic has at least 50 times an many eligible sites as are required.

Reliability Calculations

DEFF Research Database (Denmark)

Petersen, Kurt Erling

1986-01-01

Risk and reliability analysis is increasingly being used in evaluations of plant safety and plant reliability. The analysis can be performed either during the design process or during the operation time, with the purpose to improve the safety or the reliability. Due to plant complexity and safety...... and availability requirements, sophisticated tools, which are flexible and efficient, are needed. Such tools have been developed in the last 20 years and they have to be continuously refined to meet the growing requirements. Two different areas of application were analysed. In structural reliability probabilistic...... approaches have been introduced in some cases for the calculation of the reliability of structures or components. A new computer program has been developed based upon numerical integration in several variables. In systems reliability Monte Carlo simulation programs are used especially in analysis of very...

Three decision-making aids: brainstorming, nominal group, and Delphi technique.

Science.gov (United States)

McMurray, A R

1994-01-01

The methods of brainstorming, Nominal Group Technique, and the Delphi technique can be important resources for nursing staff development educators who wish to expand their decision-making skills. Staff development educators may find opportunities to use these methods for such tasks as developing courses, setting departmental goals, and forecasting trends for planning purposes. Brainstorming, Nominal Group Technique, and the Delphi technique provide a structured format that helps increase the quantity and quality of participant responses.

A dissociation between engagement and learning: Enthusiastic instructions fail to reliably improve performance on a memory task.

Directory of Open Access Journals (Sweden)

Benjamin A Motz

Full Text Available Despite widespread assertions that enthusiasm is an important quality of effective teaching, empirical research on the effect of enthusiasm on learning and memory is mixed and largely inconclusive. To help resolve these inconsistencies, we conducted a carefully-controlled laboratory experiment, investigating whether enthusiastic instructions for a memory task would improve recall accuracy. Scripted videos, either enthusiastic or neutral, were used to manipulate the delivery of task instructions. We also manipulated the sequence of learning items, replicating the spacing effect, a known cognitive technique for memory improvement. Although spaced study reliably improved test performance, we found no reliable effect of enthusiasm on memory performance across two experiments. We did, however, find that enthusiastic instructions caused participants to respond to more item prompts, leaving fewer test questions blank, an outcome typically associated with increased task motivation. We find no support for the popular claim that enthusiastic instruction will improve learning, although it may still improve engagement. This dissociation between motivation and learning is discussed, as well as its implications for education and future research on student learning.

A dissociation between engagement and learning: Enthusiastic instructions fail to reliably improve performance on a memory task.

Science.gov (United States)

Motz, Benjamin A; de Leeuw, Joshua R; Carvalho, Paulo F; Liang, Kaley L; Goldstone, Robert L

2017-01-01

Despite widespread assertions that enthusiasm is an important quality of effective teaching, empirical research on the effect of enthusiasm on learning and memory is mixed and largely inconclusive. To help resolve these inconsistencies, we conducted a carefully-controlled laboratory experiment, investigating whether enthusiastic instructions for a memory task would improve recall accuracy. Scripted videos, either enthusiastic or neutral, were used to manipulate the delivery of task instructions. We also manipulated the sequence of learning items, replicating the spacing effect, a known cognitive technique for memory improvement. Although spaced study reliably improved test performance, we found no reliable effect of enthusiasm on memory performance across two experiments. We did, however, find that enthusiastic instructions caused participants to respond to more item prompts, leaving fewer test questions blank, an outcome typically associated with increased task motivation. We find no support for the popular claim that enthusiastic instruction will improve learning, although it may still improve engagement. This dissociation between motivation and learning is discussed, as well as its implications for education and future research on student learning.

Prediction method of long-term reliability in improving residual stresses by means of surface finishing

International Nuclear Information System (INIS)

Sera, Takehiko; Hirano, Shinro; Chigusa, Naoki; Okano, Shigetaka; Saida, Kazuyoshi; Mochizuki, Masahito; Nishimoto, Kazutoshi

2012-01-01

Surface finishing methods, such as Water Jet Peening (WJP), have been applied to welds in some major components of nuclear power plants as a counter measure to Primary Water Stress Corrosion Cracking (PWSCC). In addition, the methods of surface finishing (buffing treatment) is being standardized, and thus the buffing treatment has been also recognized as the well-established method of improving stress. On the other hand, the long-term stability of peening techniques has been confirmed by accelerated test. However, the effectiveness of stress improvement by surface treatment is limited to thin layers and the effect of complicated residual stress distribution in the weld metal beneath the surface is not strictly taken into account for long-term stability. This paper, therefore, describes the accelerated tests, which confirmed that the long-term stability of the layer subjected to buffing treatment was equal to that subjected to WJP. The long-term reliability of very thin stress improved layer was also confirmed through a trial evaluation by thermal elastic-plastic creep analysis, even if the effect of complicated residual stress distribution in the weld metal was excessively taken into account. Considering the above findings, an approach is proposed for constructing the prediction method of the long-term reliability of stress improvement by surface finishing. (author)

SELECTION OF RATIONAL PARAMETERS OF THE NOMINAL MODE OF ELECTRIC LOCOMOTIVES

Directory of Open Access Journals (Sweden)

H. K. Hetman

2017-02-01

Full Text Available Purpose.The railways of Ukraine have been operated the locomotives, which are both morally and physically obsolete. Therefore, to ensure the competitiveness of rail transport it is necessary to update the locomotive fleet, and first of all the fleet of electric locomotives, because electrified railways provide the greater part of passenger and freight traffic. In this connection it is of special importance to determine the optimum parameters of the nominal mode of electric rolling stock. The purpose of the work is to examine the features of solution of these problems with respect to electric locomotives. Methodology. Assuming that the limit values of traction force are determined by the conditions of wheel-rail grip, then the power of the nominal mode can be represented as the product of rated speed, estimated friction coefficient, train weight and the coefficients that represent the ratio of the estimated (starting value of traction force to value of traction force the nominal mode and the ratio of the mass of the locomotive to the train weight. Since the mass of the train is not a constant value, there is always a surplus power of the locomotive fleet required for the mastering of a predetermined volume of transportations. Reduced overcapacity of the locomotive fleet can be achieved by introduction of the locomotives of different power, designed for driving trains of different weight that will result in increased completeness of the power use but also in difficulty in selecting of locomotives for trains in operation. The paper shows the method of calculating the optimum values of power, speed and traction force of the nominal mode. It presents the mathematical model of the relationship of traction rate, excessive capacity and power of the traction unit. Findings.It is proved that the power of the traction unit, the total fleet power requirement and the excess of power in absolute units are proportional to the speed of the nominal mode. To

36 CFR 60.11 - Requests for nominations.

Science.gov (United States)

2010-07-01

... Officer need not process the nomination, unless so requested by the Keeper pursuant to § 60.12. (d) The... also provide notice to the applicant of the time and place of the Review Board meeting at least 30 but...

Complex method to calculate objective assessments of information systems protection to improve expert assessments reliability

Science.gov (United States)

Abdenov, A. Zh; Trushin, V. A.; Abdenova, G. A.

2018-01-01

The paper considers the questions of filling the relevant SIEM nodes based on calculations of objective assessments in order to improve the reliability of subjective expert assessments. The proposed methodology is necessary for the most accurate security risk assessment of information systems. This technique is also intended for the purpose of establishing real-time operational information protection in the enterprise information systems. Risk calculations are based on objective estimates of the adverse events implementation probabilities, predictions of the damage magnitude from information security violations. Calculations of objective assessments are necessary to increase the reliability of the proposed expert assessments.

Improved Reliability of Single-Phase PV Inverters by Limiting the Maximum Feed-in Power

DEFF Research Database (Denmark)

Yang, Yongheng; Wang, Huai; Blaabjerg, Frede

2014-01-01

Grid operation experiences have revealed the necessity to limit the maximum feed-in power from PV inverter systems under a high penetration scenario in order to avoid voltage and frequency instability issues. A Constant Power Generation (CPG) control method has been proposed at the inverter level...... devices, allowing a quantitative prediction of the power device lifetime. A study case on a 3 kW single-phase PV inverter has demonstrated the advantages of the CPG control in terms of improved reliability.......Grid operation experiences have revealed the necessity to limit the maximum feed-in power from PV inverter systems under a high penetration scenario in order to avoid voltage and frequency instability issues. A Constant Power Generation (CPG) control method has been proposed at the inverter level....... The CPG control strategy is activated only when the DC input power from PV panels exceeds a specific power limit. It enables to limit the maximum feed-in power to the electric grids and also to improve the utilization of PV inverters. As a further study, this paper investigates the reliability performance...

ATLAS Barrel Toroid magnet reached nominal field

CERN Multimedia

2006-01-01

 On 9 November the barrel toroid magnet reached its nominal field of 4 teslas, with an electrical current of 21 000 amperes (21 kA) passing through the eight superconducting coils as shown on this graph

Stochastic Nominal Wage Contacts in a Cash-in-Advance Model

OpenAIRE

Collard, Fabrice; Ertz, Guy

1996-01-01

We build a simple cash-in-advance model for the German economy, in which we introduce stochastic nominal wage contracts. This allows to weaken the negative effect of the inflation tax such that monetary shocks exert a positive effect on output dynamics. The nominal wage contract model is able to mimic the correlation of inflation and real balances with output. It also lowers the standard deviation of inflation relative to that of output. Further, the variance decomposition analysis indicates ...

Fuel R and D to improve fuel reliability

International Nuclear Information System (INIS)

Yang, Rosa; Cheng, Bo; Deshon, Jeff; Edsinger, Kurt; Ozer, Odelli

2006-01-01

Light water reactor fuel is operating in an increasingly challenging environment. Fuel burnup extension and cycle length increase both can increase the local duty. Reactor water chemistry modifications for the purpose of protection the plant system materials have the potential of increasing fuel surface deposition and cladding corrosion and hydriding. The status of fuel performance in US reactors is summarized and an update of the Fuel Reliability Program' established by the utility industry to ensure reliability is provided. (author)

75 FR 43933 - Request for nominations for members to serve on National Institute of Standards and Technology...

Science.gov (United States)

2010-07-27

... duties. Selection of ISPAB members will not be limited to individuals who are nominated. Nominations that.... Selection of MEP Advisory Board members will not be limited to individuals who are nominated. Nominations... in its official role as the private sector policy advisor of the Institute is concerned. Each such...

77 FR 40332 - Request for Nominations for Members To Serve on National Institute of Standards and Technology...

Science.gov (United States)

2012-07-09

... duties. Selection of ISPAB members will not be limited to individuals who are nominated. Nominations that... to individuals who are nominated. Nominations that are received and meet the requirements will be... policy advisor of NIST is concerned. Each such report shall identify areas of program emphasis for NIST...

78 FR 67121 - Request for Nominations for Members To Serve on National Institute of Standards and Technology...

Science.gov (United States)

2013-11-08

... to individuals who are nominated. Nominations that are received and meet the requirements will be.... Selection of MEP Advisory Board members will not be limited to individuals who are nominated. Nominations... official role as the private sector policy adviser of NIST is concerned. Each such report shall identify...

Engineering of electrical systems of nuclear power stations for improved reliability

International Nuclear Information System (INIS)

Narasinga Rao, S.N.; Ramanathan, K.; Choudhary, N.N.

1977-01-01

Operational problems experienced in electrical systems/equipment of the Tarapur Atomic Power Station (TAPS) and the Rajasthan Atomic Power Station (RAPS) and their solutions are dealt in detail. This experience has led to new design concepts which are being introduced for improved reliability in design of the Madras Atomic Power Project (MAPP) and the Narora Atomic Power Project (NAPP). Saline pollution on switchyard equipments was the major problem of the TAPS due to its coastal location. Saline pollution resulted in flash over of insulators and failure of clamps. The problem was solved by suitable changes in insulators, conductors, transformers, switches and arranging portable live line washing of the switchyard equipment. In MAPP which is also located on coast, an indoor switchyard is built. NAPP is located in a seismic zone, therefore, all equipment is specified for appropriate seismic duty. Various other improvements are described. (M.G.B.)

76 FR 39379 - Request for Nominations for Members To Serve on National Institute of Standards and Technology...

Science.gov (United States)

2011-07-06

... will not be limited to individuals who are nominated. Nominations that are received and meet the... individuals who are nominated. Nominations that are received and meet the requirements will be kept on file to... in its official role as the private sector policy advisor of the Institute is concerned. Each such...

Reliability assessment of passive isolation condenser system of AHWR using APSRA methodology

International Nuclear Information System (INIS)

Nayak, A.K.; Jain, Vikas; Gartia, M.R.; Prasad, Hari; Anthony, A.; Bhatia, S.K.; Sinha, R.K.

2009-01-01

In this paper, a methodology known as APSRA (Assessment of Passive System ReliAbility) is used for evaluation of reliability of passive isolation condenser system of the Indian Advanced Heavy Water Reactor (AHWR). As per the APSRA methodology, the passive system reliability evaluation is based on the failure probability of the system to perform the design basis function. The methodology first determines the operational characteristics of the system and the failure conditions based on a predetermined failure criterion. The parameters that could degrade the system performance are identified and considered for analysis. Different modes of failure and their cause are identified. The failure surface is predicted using a best estimate code considering deviations of the operating parameters from their nominal states, which affect the isolation condenser system performance. Once the failure surface of the system is predicted, the causes of failure are examined through root diagnosis, which occur mainly due to failure of mechanical components. Reliability of the system is evaluated through a classical PSA treatment based on the failure probability of the components using generic data

Nominal Anchors in the CIS

OpenAIRE

Peter M Keller; Thomas J Richardson

2003-01-01

Monetary policy has become increasingly important in the countries of the Commonwealth of Independent States (CIS) as fiscal adjustment and structural reforms have taken root. Inflation has been brought down to relatively low levels in almost all of these countries, raising the question of what should be the appropriate nominal anchor at this stage. Formally, almost all CIS countries have floating exchange rate regimes, yet in practice they manage their exchange rates very heavily, perhaps be...

78 FR 59058 - Second Call for Nominations for the Wild Horse and Burro Advisory Board

Science.gov (United States)

2013-09-25

... connection with special needs for advice. Individuals may nominate themselves or others. Any individual or organization may nominate one or more persons to serve on the Board. Nominations will not be accepted without a... council of the BLM. If you are appointed as an advisor, the information will be retained by the appointing...

2015 NREL Photovoltaic Module Reliability Workshops

Energy Technology Data Exchange (ETDEWEB)

Kurtz, Sarah [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-14

NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

2016 NREL Photovoltaic Module Reliability Workshop

Energy Technology Data Exchange (ETDEWEB)

Kurtz, Sarah [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-07

NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology - both critical goals for moving PV technologies deeper into the electricity marketplace.

Reliability evaluation of smart distribution grids

OpenAIRE

Kazemi, Shahram

2011-01-01

The term "Smart Grid" generally refers to a power grid equipped with the advanced technologies dedicated for purposes such as reliability improvement, ease of control and management, integrating of distributed energy resources and electricity market operations. Improving the reliability of electric power delivered to the end users is one of the main targets of employing smart grid technologies. The smart grid investments targeted for reliability improvement can be directed toward the generati...

Optimized work control process to improve safety and reliability in a risk-based and deregulated environment

International Nuclear Information System (INIS)

Anderson, Jon G.; Jeffries, Jeffrey D. E.; Mairs, Todd P.; Rahn, Frank J.

1999-01-01

This paper provides an overview of strategic models to assist power generating plants to improve their work control processes. These models include mechanisms to continually keep the process up to date. Included in the work control process are elements for system cost/performance analysis, life-cycle maintenance planning, on-line scheduling and look-ahead techniques, and schedule implementation to conduct work on the asset. The paper also discusses how risk management associated with work control issues that effect the safety and reliability, as well as O and M costs, is integrated into this strategy. The work control process is a pervasive and critical element in the successful implementation of operations and work management programs. While providing a method to implement maintenance activities in a cost-effective manner, the work control process improves plant safety and system reliability

7 CFR 1210.321 - Nominations and selection.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Nominations and selection. 1210.321 Section 1210.321 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... PROMOTION PLAN Watermelon Research and Promotion Plan National Watermelon Promotion Board § 1210.321...

32 CFR 901.20 - Notice of nomination.

Science.gov (United States)

2010-07-01

...' nominations. If not previously received, USAFA/RRS forwards a precandidate questionnaire for completion. If the precandidate questionnaire indicates the potential to qualify for admission to the Academy or the... Candidate Personal Data Record; USAFA Form 147, AFA Candidate Activities Record; and USAFA Form 148, AFA...

Constructive Empiricism and Model Nominalism. | Udokang | Sophia ...

African Journals Online (AJOL)

James Ladyman has argued that constructive empiricism entails modal realism, and that this renders constructive empiricism untenable. We maintain that constructive empiricism is compatible with modal nominalism. Although the central term “observable” has been analyzed in terms of counterfactuals, and in general ...

PV Systems Reliability Final Technical Report.

Energy Technology Data Exchange (ETDEWEB)

Lavrova, Olga [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Flicker, Jack David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Johnson, Jay [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Armijo, Kenneth Miguel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gonzalez, Sigifredo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Schindelholz, Eric John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sorensen, Neil R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Yang, Benjamin Bing-Yeh [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-12-01

The continued exponential growth of photovoltaic technologies paves a path to a solar-powered world, but requires continued progress toward low-cost, high-reliability, high-performance photovoltaic (PV) systems. High reliability is an essential element in achieving low-cost solar electricity by reducing operation and maintenance (O&M) costs and extending system lifetime and availability, but these attributes are difficult to verify at the time of installation. Utilities, financiers, homeowners, and planners are demanding this information in order to evaluate their financial risk as a prerequisite to large investments. Reliability research and development (R&D) is needed to build market confidence by improving product reliability and by improving predictions of system availability, O&M cost, and lifetime. This project is focused on understanding, predicting, and improving the reliability of PV systems. The two areas being pursued include PV arc-fault and ground fault issues, and inverter reliability.

[Examination of safety improvement by failure record analysis that uses reliability engineering].

Science.gov (United States)

Kato, Kyoichi; Sato, Hisaya; Abe, Yoshihisa; Ishimori, Yoshiyuki; Hirano, Hiroshi; Higashimura, Kyoji; Amauchi, Hiroshi; Yanakita, Takashi; Kikuchi, Kei; Nakazawa, Yasuo

2010-08-20

How the maintenance checks of the medical treatment system, including start of work check and the ending check, was effective for preventive maintenance and the safety improvement was verified. In this research, date on the failure of devices in multiple facilities was collected, and the data of the trouble repair record was analyzed by the technique of reliability engineering. An analysis of data on the system (8 general systems, 6 Angio systems, 11 CT systems, 8 MRI systems, 8 RI systems, and the radiation therapy system 9) used in eight hospitals was performed. The data collection period assumed nine months from April to December 2008. Seven items were analyzed. (1) Mean time between failures (MTBF) (2) Mean time to repair (MTTR) (3) Mean down time (MDT) (4) Number found by check in morning (5) Failure generation time according to modality. The classification of the breakdowns per device, the incidence, and the tendency could be understood by introducing reliability engineering. Analysis, evaluation, and feedback on the failure generation history are useful to keep downtime to a minimum and to ensure safety.

Integrated reliability condition monitoring and maintenance of equipment

CERN Document Server

Osarenren, John

2015-01-01

Consider a Viable and Cost-Effective Platform for the Industries of the Future (IOF) Benefit from improved safety, performance, and product deliveries to your customers. Achieve a higher rate of equipment availability, performance, product quality, and reliability. Integrated Reliability: Condition Monitoring and Maintenance of Equipment incorporates reliable engineering and mathematical modeling to help you move toward sustainable development in reliability condition monitoring and maintenance. This text introduces a cost-effective integrated reliability growth monitor, integrated reliability degradation monitor, technological inheritance coefficient sensors, and a maintenance tool that supplies real-time information for predicting and preventing potential failures of manufacturing processes and equipment. The author highlights five key elements that are essential to any improvement program: improving overall equipment and part effectiveness, quality, and reliability; improving process performance with maint...

Appropriate nominal stresses for use with ASME Code pressure-loading stress indices for nozzles

International Nuclear Information System (INIS)

Rodabaugh, E.C.

1976-06-01

This program is part of a cooperative effort with industry to develop and verify analytical methods for assessing the safety of nuclear pressure-vessel and piping-system design. The study of nominal stresses and stress indices described is part of a continuing study of design rules for nozzles in pressure vessels being coordinated by the PVRC Subcommittee on Reinforced Openings and External Loadings. Results from these studies are used by appropriate ASME Code groups in drafting new and improved design rules

Follow-up of CT-derived airway wall thickness : Correcting for changes in inspiration level improves reliability

NARCIS (Netherlands)

Pompe, Esther; van Rikxoort, Eva M; Mets, Onno M; Charbonnier, Jean-Paul; Kuhnigk, Jan-Martin; de Koning, Harry J; Oudkerk, Matthijs; Vliegenthart, Rozemarijn; Zanen, Pieter; Lammers, Jan-Willem J; van Ginneken, Bram; de Jong, Pim A; Mohamed Hoesein, Firdaus A A

2016-01-01

OBJECTIVES: Airway wall thickness (AWT) is affected by changes in lung volume. This study evaluated whether correcting AWT on computed tomography (CT) for differences in inspiration level improves measurement agreement, reliability, and power to detect changes over time. METHODS: Participants of the

Follow-up of CT-derived airway wall thickness : Correcting for changes in inspiration level improves reliability

NARCIS (Netherlands)

Pompe, Esther; van Rikxoort, Eva M.; Mets, Onno M.; Charbonnier, Jean-Paul; Kuhnigk, Jan-Martin; de Koning, Harry J.; Oudkerk, Matthijs; Vliegenthart, Rozemarijn; Zanen, Pieter; Lammers, Jan-Willem J.; van Ginneken, Bram; de Jong, Pim A.; Hoesein, Firdaus A. A. Mohamed

2016-01-01

Objectives: Airway wall thickness (AWT) is affected by changes in lung volume. This study evaluated whether correcting AWT on computed tomography (CT) for differences in inspiration level improves measurement agreement, reliability, and power to detect changes over time. Methods: Participants of the

ERP application of real-time vdc-enabled last planner system for planning reliability improvement

DEFF Research Database (Denmark)

Cho, S.; Sørensen, Kristian Birch; Fischer, M.

2009-01-01

The Last Planner System (LPS) has since its introduction in 1994 become a widely used method of AEC practitioners for improvement of planning reliability and tracking and monitoring of project progress. However, the observations presented in this paper indicate that the last planners...... and coordinators are in need of a new system that integrates the existing LPS with Virtual Design and Construction (VDC), Enterprise Resource Planning (ERP) systems, and automatic object identification by means of Radio Frequency Identification (RFID) technology. This is because current practice of the LPS...... implementations is guesswork-driven, textual report-generated, hand-updated, and even interpersonal trust-oriented, resulting in less accurate and reliable plans. This research introduces a prototype development of the VREL (VDC + RFID + ERP + LPS) integration to generate a real-time updated cost + physical...

Content Validity and Psychometric Properties of the Nomination Scale for Identifying Football Talent (NSIFT: Application to Coaches, Parents and Players

Directory of Open Access Journals (Sweden)

Alejandro Prieto-Ayuso

2017-01-01

Full Text Available The identification of football talent is a critical issue both for clubs and the families of players. However, despite its importance in a sporting, economic and social sense, there appears to be a lack of instruments that can reliably measure talent performance. The aim of this study was to design and validate the Nomination Scale for Identifying Football Talent (NSIFT, with the aim of optimising the processes for identifying said talent. The scale was first validated through expert judgment, and then statistically, by means of an exploratory factor analysis (EFA, confirmatory factor analysis (CFA, internal reliability and convergent validity. The results reveal the presence of three factors in the scale’s factor matrix, with these results being confirmed by the CFA. The scale revealed suitable internal reliability and homogeneity indices. Convergent validity showed that it is teammates who are best able to identify football talent, followed by coaches and parents. It can be concluded that the NSIFT is suitable for use in the football world. Future studies should seek to confirm these results in different contexts by means of further CFAs.

THE NOMINAL PREDICATE (ALBANIAN - ENGLISH)

OpenAIRE

Shkelqim Millaku

2017-01-01

The aim of this paper is to description the nominal of predicate between two languages (Albanian – English). The purpose of the following discussing is to show that some noun phrases, namely predicate nominal’s, do not seem to exhibit. What is considering the typical behavior of noun phrase? First, they do not seem to be assigned case. Second, they may not assign are roles in normal sense so that they are probably as Theta-marker arguments, unlike referential Noun Phrases.[1] In Albanian lang...

76 FR 45555 - Nominations to the FIFRA Scientific Advisory Panel; Request for Comments

Science.gov (United States)

2011-07-29

... data of persons nominated to serve on the Scientific Advisory Panel (SAP) established under section 25... and the NSF nominate scientists to fill vacancies occurring on the Panel. The Agency requested... Health Science Advisor in the Division of Specialized Information Services at the National Library of...

Reliability calculations

International Nuclear Information System (INIS)

Petersen, K.E.

1986-03-01

Risk and reliability analysis is increasingly being used in evaluations of plant safety and plant reliability. The analysis can be performed either during the design process or during the operation time, with the purpose to improve the safety or the reliability. Due to plant complexity and safety and availability requirements, sophisticated tools, which are flexible and efficient, are needed. Such tools have been developed in the last 20 years and they have to be continuously refined to meet the growing requirements. Two different areas of application were analysed. In structural reliability probabilistic approaches have been introduced in some cases for the calculation of the reliability of structures or components. A new computer program has been developed based upon numerical integration in several variables. In systems reliability Monte Carlo simulation programs are used especially in analysis of very complex systems. In order to increase the applicability of the programs variance reduction techniques can be applied to speed up the calculation process. Variance reduction techniques have been studied and procedures for implementation of importance sampling are suggested. (author)

78 FR 39768 - Notice of Call for Nominations for the Wild Horse and Burro Advisory Board

Science.gov (United States)

2013-07-02

... special needs for advice. Individuals may nominate themselves or others. Any individual or organization may nominate one or more persons to serve on the Board. Nominations will not be accepted without a... advisory council of the BLM. If you are appointed as an advisor, the information will be retained by the...

North American Electric Reliability Council (NERC) Reliability Coordinators

Data.gov (United States)

Department of Homeland Security — ERC is an international regulatory authority that works to improve the reliability of the bulk power system in North America. NERC works with many different regional...

Video training and certification program improves reliability of postischemic neurologic deficit measurement in the rat.

Science.gov (United States)

Taninishi, Hideki; Pearlstein, Molly; Sheng, Huaxin; Izutsu, Miwa; Chaparro, Rafael E; Goldstein, Larry B; Warner, David S

2016-12-01

Scoring systems are used to measure behavioral deficits in stroke research. Video-assisted training is used to standardize stroke-related neurologic deficit scoring in humans. We hypothesized that a video-assisted training and certification program can improve inter-rater reliability in assessing neurologic function after middle cerebral artery occlusion in rats. Three expert raters scored neurologic deficits in post-middle cerebral artery occlusion rats using three published systems having different complexity levels (3, 18, or 48 points). The system having the highest point estimate for the correlation between neurologic score and infarct size was selected to create a video-assisted training and certification program. Eight trainee raters completed the video-assisted training and certification program. Inter-rater agreement ( Κ: score) and agreement with expert consensus scores were measured before and after video-assisted training and certification program completion. The 48-point system correlated best with infarct size. Video-assisted training and certification improved agreement with expert consensus scores (pretraining = 65 ± 10, posttraining = 87 ± 14, 112 possible scores, P  0.4 (pretraining = 4, posttraining = 9), and number of categories with an improvement in the Κ: score from pretraining to posttraining (n = 6). Video-assisted training and certification improved trainee inter-rater reliability and agreement with expert consensus behavioral scores in rats after middle cerebral artery occlusion. Video-assisted training and certification may be useful in multilaboratory preclinical studies. © The Author(s) 2015.

Mining protein interactomes to improve their reliability and support the advancement of network medicine

KAUST Repository

Alanis Lobato, Gregorio

2015-09-23

High-throughput detection of protein interactions has had a major impact in our understanding of the intricate molecular machinery underlying the living cell, and has permitted the construction of very large protein interactomes. The protein networks that are currently available are incomplete and a significant percentage of their interactions are false positives. Fortunately, the structural properties observed in good quality social or technological networks are also present in biological systems. This has encouraged the development of tools, to improve the reliability of protein networks and predict new interactions based merely on the topological characteristics of their components. Since diseases are rarely caused by the malfunction of a single protein, having a more complete and reliable interactome is crucial in order to identify groups of inter-related proteins involved in disease etiology. These system components can then be targeted with minimal collateral damage. In this article, an important number of network mining tools is reviewed, together with resources from which reliable protein interactomes can be constructed. In addition to the review, a few representative examples of how molecular and clinical data can be integrated to deepen our understanding of pathogenesis are discussed.

Mining protein interactomes to improve their reliability and support the advancement of network medicine

Directory of Open Access Journals (Sweden)

Gregorio eAlanis-Lobato

2015-09-01

Full Text Available High-throughput detection of protein interactions has had a major impact in our understanding of the intricate molecular machinery underlying the living cell, and has permitted the construction of very large protein interactomes. The protein networks that are currently available are incomplete and a significant percentage of their interactions are false positives. Fortunately, the structural properties observed in good quality social or technological networks are also present in biological systems. This has encouraged the development of tools, to improve the reliability of protein networks and predict new interactions based merely on the topological characteristics of their components. Since diseases are rarely caused by the malfunction of a single protein, having a more complete and reliable interactome is crucial in order to identify groups of inter-related proteins involved in disease aetiology. These system components can then be targeted with minimal collateral damage. In this article, an important number of network mining tools is reviewed, together with resources from which reliable protein interactomes can be constructed. In addition to the review, a few representative examples of how molecular and clinical data can be integrated to deepen our understanding of pathogenesis are discussed.

Improving human reliability through better nuclear power plant system design. Progress report

International Nuclear Information System (INIS)

Golay, M.W.

1995-01-01

The project on open-quotes Development of a Theory of the Dependence of Human Reliability upon System Designs as a Means of Improving Nuclear Power Plant Performanceclose quotes has been undertaken in order to address the important problem of human error in advanced nuclear power plant designs. Most of the creativity in formulating such concepts has focused upon improving the mechanical reliability of safety related plant systems. However, the lack of a mature theory has retarded similar progress in reducing the likely frequencies of human errors. The main design mechanism used to address this class of concerns has been to reduce or eliminate the human role in plant operations and accident response. The plan of work being pursued in this project is to perform a set of experiments involving human subject who are required to operate, diagnose and respond to changes in computer-simulated systems, relevant to those encountered in nuclear power plants. In the tests the systems are made to differ in complexity in a systematic manner. The computer program used to present the problems to be solved also records the response of the operator as it unfolds. Ultimately this computer is also to be used in compiling the results of the project. The work of this project is focused upon nuclear power plant applications. However, the persuasiveness of human errors in using all sorts of electromechanical machines gives it a much greater potential importance. Because of this we are attempting to pursue our work in a fashion permitting broad generalizations

What's in a name? Nominative determinism in the UK dental workforce.

Science.gov (United States)

Sleigh, J

2016-12-16

Background Nominative determinism describes the theory that people are more likely to pursue careers that are connected to their names. Compelling research has been carried out across the medical professions that provides strong evidence for this phenomenon, but as yet its applicability to the UK dental workforce remains unknown.Aim The aim of this study was to establish the prevalence of dentally-related surnames in the UK dental workforce (dentists and dental care professionals) and compare this to the UK population.Results Dentistry may provide a surprising counter-example to prevailing theories of nominative determinism, as UK dentists are significantly less likely than the UK general population to have dentally-related surnames. This new phenomenon of 'nominative antideterminism' was not observed in the dental care professional (DCP) cohort, for whom the prevalence of dentally-related surnames was similar to that in the wider UK population.

Improving the reliability of GUB-20000 gamma unit for large laboratory animals irradiation

International Nuclear Information System (INIS)

Videnskij, V.G.

1994-01-01

GUB-20000 gamma unit for large laboratory animals irradiation is described and results of investigation into its reliability improvement are considered. Cables of superstrength high-modular (SSHM) polymer fibre and capron fiber were tested to establish their applicability in the above unit. Samples were exposed to gamma-radiation and fast electrons and were tested for tensile properties. Application of SSHM-fiber cables to modernize the GUB-20000 unit was found to be perspective due to superhigh radiation strength. 5 refs., 1 tab

7 CFR 993.128 - Nominations for membership.

Science.gov (United States)

2010-01-01

... counties not included in Districts 1, 2, 3, 4, 5 and 6. (b) Voting procedures—(1) Independent producers... candidates for nomination to the Secretary for selection as members and alternate members for the respective districts. Each such candidate must be a producer in the district for which he is proposed. Prior to March...

POLITICALLY CORRECT MEANS OF PERSON’S NOMINATION IN CLIENTELE DISCOURSE

Directory of Open Access Journals (Sweden)

Маргарита Сергеевна Михайлова

2013-04-01

Full Text Available The purpose of the present article is to describe the patterns of politically correct naming of persons with disabilities, replacing direct human nominations, that can hurt one’s feelings and dignity.The article deals with the ways of politically correct persons’ nomination in the clientele discourse presented on the English-language web-sites of insurance and airline companies. The author gives the definition of the clientele discourse, educes the linguistic mechanism of politically correct persons’ naming in the English clientele discourse.DOI: http://dx.doi.org/10.12731/2218-7405-2013-3-20

77 FR 63827 - Request for Nominations of Experts for the Clean Air Scientific Advisory Committee (CASAC) Oxides...

Science.gov (United States)

2012-10-17

... health-based) air quality standards for oxides of nitrogen (NO X ). DATES: Nominations should be..., medicine, public health, biostatistics and risk assessment. Process and Deadline for Submitting Nominations... later than November 7, 2012. EPA values and welcomes diversity. In an effort to obtain nominations of...

Improving School Improvement: Development and Validation of the CSIS-360, a 360-Degree Feedback Assessment for School Improvement Specialists

Science.gov (United States)

McDougall, Christie M.

2013-01-01

The purpose of the mixed methods study was to develop and validate the CSIS-360, a 360-degree feedback assessment to measure competencies of school improvement specialists from multiple perspectives. The study consisted of eight practicing school improvement specialists from a variety of settings. The specialists nominated 23 constituents to…

A Simulation Model for Machine Efficiency Improvement Using Reliability Centered Maintenance: Case Study of Semiconductor Factory

Directory of Open Access Journals (Sweden)

Srisawat Supsomboon

2014-01-01

Full Text Available The purpose of this study was to increase the quality of product by focusing on the machine efficiency improvement. The principle of the reliability centered maintenance (RCM was applied to increase the machine reliability. The objective was to create preventive maintenance plan under reliability centered maintenance method and to reduce defects. The study target was set to reduce the Lead PPM for a test machine by simulating the proposed preventive maintenance plan. The simulation optimization approach based on evolutionary algorithms was employed for the preventive maintenance technique selection process to select the PM interval that gave the best total cost and Lead PPM values. The research methodology includes procedures such as following the priority of critical components in test machine, analyzing the damage and risk level by using Failure Mode and Effects Analysis (FMEA, calculating the suitable replacement period through reliability estimation, and optimizing the preventive maintenance plan. From the result of the study it is shown that the Lead PPM of test machine can be reduced. The cost of preventive maintenance, cost of good product, and cost of lost product were decreased.

5 CFR 362.202 - Announcement, nomination, and selection.

Science.gov (United States)

2010-01-01

... for, as well as a clear interest in and commitment to, leadership in the analysis and management of.... 362.202 Section 362.202 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PRESIDENTIAL MANAGEMENT FELLOWS PROGRAM Program Administration § 362.202 Announcement, nomination...

Nominations sought for U.S. National Medal of Science

Science.gov (United States)

Showstack, Randy

2012-01-01

Nominations are now being accepted for the 2012 U.S. National Medal of Science, which is the nation's highest honor for American scientists and engineers, presented annually by the president. The award is given to individuals “deserving of special recognition by reason of their outstanding cumulative contributions to knowledge” in the physical, biological, chemical, mathematical, engineering, or behavioral or social sciences, in combination with exemplary service to the nation, according to the program, which is administered by the National Science Foundation (NSF) on behalf of the White House Office of Science and Technology Policy. A note in NSF's call for nominations states, “We are especially interested in identifying women, members of minority groups, and persons with disabilities for consideration.”

Equipment reliability process improvement and preventive maintenance optimization

International Nuclear Information System (INIS)

Darragi, M.; Georges, A.; Vaillancourt, R.; Komljenovic, D.; Croteau, M.

2004-01-01

The Gentilly-2 Nuclear Power Plant wants to optimize its preventive maintenance program through an Integrated Equipment Reliability Process. All equipment reliability related activities should be reviewed and optimized in a systematic approach especially for aging plants such as G2. This new approach has to be founded on best practices methods with the purpose of the rationalization of the preventive maintenance program and the performance monitoring of on-site systems, structures and components (SSC). A rational preventive maintenance strategy is based on optimized task scopes and frequencies depending on their applicability, critical effects on system safety and plant availability as well as cost-effectiveness. Preventive maintenance strategy efficiency is systematically monitored through degradation indicators. (author)

Identification of Strategies to Facilitate Organ Donation among African Americans using the Nominal Group Technique

Science.gov (United States)

Qu, Haiyan; Shewchuk, Richard; Mannon, Roslyn B.; Gaston, Robert; Segev, Dorry L.; Mannon, Elinor C.; Martin, Michelle Y.

2015-01-01

Background and objectives African Americans are disproportionately affected by ESRD, but few receive a living donor kidney transplant. Surveys assessing attitudes toward donation have shown that African Americans are less likely to express a willingness to donate their own organs. Studies aimed at understanding factors that may facilitate the willingness of African Americans to become organ donors are needed. Design, setting, participants, & measurements A novel formative research method was used (the nominal group technique) to identify and prioritize strategies for facilitating increases in organ donation among church-attending African Americans. Four nominal group technique panel interviews were convened (three community and one clergy). Each community panel represented a distinct local church; the clergy panel represented five distinct faith-based denominations. Before nominal group technique interviews, participants completed a questionnaire that assessed willingness to become a donor; 28 African-American adults (≥19 years old) participated in the study. Results In total, 66.7% of participants identified knowledge- or education-related strategies as most important strategies in facilitating willingness to become an organ donor, a view that was even more pronounced among clergy. Three of four nominal group technique panels rated a knowledge-based strategy as the most important and included strategies, such as information on donor involvement and donation-related risks; 29.6% of participants indicated that they disagreed with deceased donation, and 37% of participants disagreed with living donation. Community participants’ reservations about becoming an organ donor were similar for living (38.1%) and deceased (33.4%) donation; in contrast, clergy participants were more likely to express reservations about living donation (33.3% versus 16.7%). Conclusions These data indicate a greater opposition to living donation compared with donation after one’s death

Reliability and accuracy of four dental shade-matching devices.

Science.gov (United States)

Kim-Pusateri, Seungyee; Brewer, Jane D; Davis, Elaine L; Wee, Alvin G

2009-03-01

There are several electronic shade-matching instruments available for clinical use, but the reliability and accuracy of these instruments have not been thoroughly investigated. The purpose of this in vitro study was to evaluate the reliability and accuracy of 4 dental shade-matching instruments in a standardized environment. Four shade-matching devices were tested: SpectroShade, ShadeVision, VITA Easyshade, and ShadeScan. Color measurements were made of 3 commercial shade guides (Vitapan Classical, Vitapan 3D-Master, and Chromascop). Shade tabs were placed in the middle of a gingival matrix (Shofu GUMY) with shade tabs of the same nominal shade from additional shade guides placed on both sides. Measurements were made of the central region of the shade tab positioned inside a black box. For the reliability assessment, each shade tab from each of the 3 shade guide types was measured 10 times. For the accuracy assessment, each shade tab from 10 guides of each of the 3 types evaluated was measured once. Differences in reliability and accuracy were evaluated using the Standard Normal z test (2 sided) (alpha=.05) with Bonferroni correction. Reliability of devices was as follows: ShadeVision, 99.0%; SpectroShade, 96.9%; VITA Easyshade, 96.4%; and ShadeScan, 87.4%. A significant difference in reliability was found between ShadeVision and ShadeScan (P=.008). All other comparisons showed similar reliability. Accuracy of devices was as follows: VITA Easyshade, 92.6%; ShadeVision, 84.8%; SpectroShade, 80.2%; and ShadeScan, 66.8%. Significant differences in accuracy were found between all device pairs (Preliability (over 96%), indicating predictable shade values from repeated measurements. However, there was more variability in accuracy among devices (67-93%), and differences in accuracy were seen with most device comparisons.

75 FR 10794 - Clean Air Act Advisory Committee (CAAAC) Request for Nominations to the CAAAC

Science.gov (United States)

2010-03-09

... Clean Air Act Advisory Committee (CAAAC) on November 19, 1990, to provide independent advice and counsel... Nominations: The U.S. Environmental Protection Agency (EPA) invites nominations of qualified candidates to be...

Call to Adopt a Nominal Set of Astrophysical Parameters and Constants to Improve the Accuracy of Fundamental Physical Properties of Stars

Science.gov (United States)

Harmanec, Petr; Prša, Andrej

2011-08-01

The increasing precision of astronomical observations of stars and stellar systems is gradually getting to a level where the use of slightly different values of the solar mass, radius, and luminosity, as well as different values of fundamental physical constants, can lead to measurable systematic differences in the determination of basic physical properties. An equivalent issue with an inconsistent value of the speed of light was resolved by adopting a nominal value that is constant and has no error associated with it. Analogously, we suggest that the systematic error in stellar parameters may be eliminated by (1) replacing the solar radius R⊙ and luminosity L⊙ by the nominal values that are by definition exact and expressed in SI units: and ; (2) computing stellar masses in terms of M⊙ by noting that the measurement error of the product GM⊙ is 5 orders of magnitude smaller than the error in G; (3) computing stellar masses and temperatures in SI units by using the derived values and ; and (4) clearly stating the reference for the values of the fundamental physical constants used. We discuss the need and demonstrate the advantages of such a paradigm shift.

Space transportation main engine reliability and safety

Science.gov (United States)

Monk, Jan C.

1991-01-01

Viewgraphs are used to illustrate the reliability engineering and aerospace safety of the Space Transportation Main Engine (STME). A technology developed is called Total Quality Management (TQM). The goal is to develop a robust design. Reducing process variability produces a product with improved reliability and safety. Some engine system design characteristics are identified which improves reliability.

Reliability evaluation of a natural circulation system

International Nuclear Information System (INIS)

Jafari, Jalil; D'Auria, Francesco; Kazeminejad, Hossein; Davilu, Hadi

2003-01-01

This paper discusses a reliability study performed with reference to a passive thermohydraulic natural circulation (NC) system, named TTL-1. A methodology based on probabilistic techniques has been applied with the main purpose to optimize the system design. The obtained results have been adopted to estimate the thermal-hydraulic reliability (TH-R) of the same system. A total of 29 relevant parameters (including nominal values and plausible ranges of variations) affecting the design and the NC performance of the TTL-1 loop are identified and a probability of occurrence is assigned for each value based on expert judgment. Following procedures established for the uncertainty evaluation of thermal-hydraulic system codes results, 137 system configurations have been selected and each configuration has been analyzed via the Relap5 best-estimate code. The reference system configuration and the failure criteria derived from the 'mission' of the passive system are adopted for the evaluation of the system TH-R. Four different definitions of a less-than-unity 'reliability-values' (where unity represents the maximum achievable reliability) are proposed for the performance of the selected passive system. This is normally considered fully reliable, i.e. reliability-value equal one, in typical Probabilistic Safety Assessment (PSA) applications in nuclear reactor safety. The two 'point' TH-R values for the considered NC system were found equal to 0.70 and 0.85, i.e. values comparable with the reliability of a pump installed in an 'equivalent' forced circulation (active) system having the same 'mission'. The design optimization study was completed by a regression analysis addressing the output of the 137 calculations: heat losses, undetected leakage, loop length, riser diameter, and equivalent diameter of the test section have been found as the most important parameters bringing to the optimal system design and affecting the TH-R. As added values for this work, the comparison has

A Comparison between the Use of Nominalization in Medical Papers by English and Iranian Writers

Directory of Open Access Journals (Sweden)

Ali Mahbudi

2014-11-01

Full Text Available A prominent feature of formal writing, particularly in the field of science and technology, is the use of nominalization. Scientific writings, including medical writings, are expected to observe formality, precision, lack of ambiguity and concentration of highly technical terms. In such genres, the use of nominalization, affecting the lexical density of the text, plays a key role. In this connection, the purpose of this study was to compare the use of nominalization and the level of lexical density in medical academic articles written by native English writers and their Iranian counterparts based on the theory of grammatical metaphor proposed by Halliday (1985.  To this end, the abstract section of 20 authentic English medical articles written by native English writers and 20 abstracts written by Iranian authors, drawn from highly influential medical journals, were selected. These abstracts were analyzed and compared based on the frequency of nominalization used and the level of lexical density in them. The findings revealed that Iranian writers used less nominalization in their writings.

Reliability database of IEA-R1 Brazilian research reactor: Applications to the improvement of installation safety

International Nuclear Information System (INIS)

Oliveira, P.S.P.; Tondin, J.B.M.; Martins, M.O.; Yovanovich, M.; Ricci Filho, W.

2010-01-01

In this paper the main features of the reliability database being developed at Ipen-Cnen/SP for IEA-R1 reactor are briefly described. Besides that, the process for collection and updating of data regarding operation, failure and maintenance of IEA-R1 reactor components is presented. These activities have been conducted by the reactor personnel under the supervision of specialists in Probabilistic Safety Analysis (PSA). The compilation of data and subsequent calculation are based on the procedures defined during an IAEA Coordinated Research Project which Brazil took part in the period from 2001 to 2004. In addition to component reliability data, the database stores data on accident initiating events and human errors. Furthermore, this work discusses the experience acquired through the development of the reliability database covering aspects like improvements in the reactor records as well as the application of the results to the optimization of operation and maintenance procedures and to the PSA carried out for IEA-R1 reactor. (author)

Thermal Protection for Mars Sample Return Earth Entry Vehicle: A Grand Challenge for Design Methodology and Reliability Verification

Science.gov (United States)

Venkatapathy, Ethiraj; Gage, Peter; Wright, Michael J.

2017-01-01

Mars Sample Return is our Grand Challenge for the coming decade. TPS (Thermal Protection System) nominal performance is not the key challenge. The main difficulty for designers is the need to verify unprecedented reliability for the entry system: current guidelines for prevention of backward contamination require that the probability of spores larger than 1 micron diameter escaping into the Earth environment be lower than 1 million for the entire system, and the allocation to TPS would be more stringent than that. For reference, the reliability allocation for Orion TPS is closer to 11000, and the demonstrated reliability for previous human Earth return systems was closer to 1100. Improving reliability by more than 3 orders of magnitude is a grand challenge indeed. The TPS community must embrace the possibility of new architectures that are focused on reliability above thermal performance and mass efficiency. MSR (Mars Sample Return) EEV (Earth Entry Vehicle) will be hit with MMOD (Micrometeoroid and Orbital Debris) prior to reentry. A chute-less aero-shell design which allows for self-righting shape was baselined in prior MSR studies, with the assumption that a passive system will maximize EEV robustness. Hence the aero-shell along with the TPS has to take ground impact and not break apart. System verification will require testing to establish ablative performance and thermal failure but also testing of damage from MMOD, and structural performance at ground impact. Mission requirements will demand analysis, testing and verification that are focused on establishing reliability of the design. In this proposed talk, we will focus on the grand challenge of MSR EEV TPS and the need for innovative approaches to address challenges in modeling, testing, manufacturing and verification.

Lecture 8: Data Reliability at CERN and Ideas on How to Improve it

CERN Multimedia

CERN. Geneva

2013-01-01

The talk will give an overview of data management activities at CERN focusing on the ongoing research activities aiming to improve data and service reliability. Alberto Pace is a member if the IT department at CERN where he leads the Data and Storage services group ensuring a coherent development process for Physics Data management activities, strongly driven by operational and user needs. He has more than 25 years experience in computing services, infrastructure, software engineering, accelerator control and accelerator operation. He graduated in Electronic Engineering from Politecnico di Milano (Italy).

Reliability improvement for anisotropic biased compensated α/β contamination meter

Energy Technology Data Exchange (ETDEWEB)

Coulon, R., E-mail: romain.coulon@cea.fr [CEA, LIST, Laboratoire Capteurs et Architectures Electroniques, F-91191 Gif-sur-Yvette (France); Montagu, T. [CEA, LIST, Laboratoire de Modélisation et Simulation des Systèmes, F-91191 Gif-sur-Yvette (France); Schoepff, V. [CEA, LIST, Laboratoire Capteurs et Architectures Electroniques, F-91191 Gif-sur-Yvette (France); Menaa, N.; Ulmann, A. Gallozzi; Blanc de Lanaute, N. [CANBERRA France, F-78182 St Quentin en Yvelines (France)

2016-11-21

Nuclear instruments such as alpha/beta contamination meter are frequently used in a compensated mode where the contribution of gamma radiation background is compensated by a guard detector. The signal of interest is then the subtraction of counting from both channels. In practice, the noise signal measured by the guard detector is not strictly equal to the noise contribution into the first detector due to anisotropic biases. The random error (under Poisson assumption) is taken into account to build a hypothesis test. The system is also designed to minimize the systematic error but in some cases, this bias could not be completely removed. The measurement system then shows different behavior when the surrounding environment changes exhibiting inopportune false alarms. A method allowing the false alarms to be suppressed is addressed in this study for compensated measurement. An improvement in terms of reliability has been proven.

A review of manufacturing metrology for improved reliability of silicon photovoltaic modules

Science.gov (United States)

Davis, Kristopher O.; Walters, Joseph; Schneller, Eric; Seigneur, Hubert; Brooker, R. Paul; Scardera, Giuseppe; Rodgers, Marianne P.; Mohajeri, Nahid; Shiradkar, Narendra; Dhere, Neelkanth G.; Wohlgemuth, John; Rudack, Andrew C.; Schoenfeld, Winston V.

2014-10-01

In this work, the use of manufacturing metrology across the supply chain to improve crystalline silicon (c-Si) photovoltaic (PV) module reliability and durability is addressed. Additionally, an overview and summary of a recent extensive literature survey of relevant measurement techniques aimed at reducing or eliminating the probability of field failures is presented. An assessment of potential gaps is also given, wherein the PV community could benefit from new research and demonstration efforts. This review is divided into three primary areas representing different parts of the c-Si PV supply chain: (1) feedstock production, crystallization and wafering; (2) cell manufacturing; and (3) module manufacturing.

Mechanical and Microstructural Evaluation of Barium Strontium Titanate Thin Films for Improved Antenna Performance and Reliability

National Research Council Canada - National Science Library

Hubbard, C

1999-01-01

Ferroelectric barium strontium titanate (Ba(1-x)SrxTiO3 BSTO) films of 1-micron nominal thickness were deposited on single crystals of sapphire and electroded substrates at substrate temperatures varying from 30 deg C to 700 deg C...

Deterministic Method for Obtaining Nominal and Uncertainty Models of CD Drives

DEFF Research Database (Denmark)

Vidal, Enrique Sanchez; Stoustrup, Jakob; Andersen, Palle

2002-01-01

In this paper a deterministic method for obtaining the nominal and uncertainty models of the focus loop in a CD-player is presented based on parameter identification and measurements in the focus loop of 12 actual CD drives that differ by having worst-case behaviors with respect to various...... properties. The method provides a systematic way to derive a nominal average model as well as a structures multiplicative input uncertainty model, and it is demonstrated how to apply mu-theory to design a controller based on the models obtained that meets certain robust performance criteria....

A Method for Improving Reliability of Radiation Detection using Deep Learning Framework

International Nuclear Information System (INIS)

Chang, Hojong; Kim, Tae-Ho; Han, Byunghun; Kim, Hyunduk; Kim, Ki-duk

2017-01-01

Radiation detection is essential technology for overall field of radiation and nuclear engineering. Previously, technology for radiation detection composes of preparation of the table of the input spectrum to output spectrum in advance, which requires simulation of numerous predicted output spectrum with simulation using parameters modeling the spectrum. In this paper, we propose new technique to improve the performance of radiation detector. The software in the radiation detector has been stagnant for a while with possible intrinsic error of simulation. In the proposed method, to predict the input source using output spectrum measured by radiation detector is performed using deep neural network. With highly complex model, we expect that the complex pattern between data and the label can be captured well. Furthermore, the radiation detector should be calibrated regularly and beforehand. We propose a method to calibrate radiation detector using GAN. We hope that the power of deep learning may also reach to radiation detectors and make huge improvement on the field. Using improved radiation detector, the reliability of detection would be confident, and there are many tasks remaining to solve using deep learning in nuclear engineering society.

Design reliability engineering

International Nuclear Information System (INIS)

Buden, D.; Hunt, R.N.M.

1989-01-01

Improved design techniques are needed to achieve high reliability at minimum cost. This is especially true of space systems where lifetimes of many years without maintenance are needed and severe mass limitations exist. Reliability must be designed into these systems from the start. Techniques are now being explored to structure a formal design process that will be more complete and less expensive. The intent is to integrate the best features of design, reliability analysis, and expert systems to design highly reliable systems to meet stressing needs. Taken into account are the large uncertainties that exist in materials, design models, and fabrication techniques. Expert systems are a convenient method to integrate into the design process a complete definition of all elements that should be considered and an opportunity to integrate the design process with reliability, safety, test engineering, maintenance and operator training. 1 fig

78 FR 42543 - Call for Nominations for the Rio Grande Natural Area Commission, Colorado

Science.gov (United States)

2013-07-16

...: Send completed Council nominations to Tom Heinlein, District Manager, BLM Front Range District Office... Relay Service (FIRS) at 1- 800-877-8339 to contact the above individual during normal business hours... (BLM) San Luis Valley Field Office will review the nomination packages in coordination with the...

77 FR 28607 - Advisory Committee on Organ Transplantation; Request for Nominations for Voting Members

Science.gov (United States)

2012-05-15

... conflict of interest that would preclude the ACOT membership. Potential candidates will be asked to provide... conflicts of interest. A nomination package should include the following information for each nominee: (1) A... candidates, and extend particular encouragement to nominations of women, racial and ethnic minorities, and...

Reliability assessment of passive containment isolation system using APSRA methodology

International Nuclear Information System (INIS)

Nayak, A.K.; Jain, Vikas; Gartia, M.R.; Srivastava, A.; Prasad, Hari; Anthony, A.; Gaikwad, A.J.; Bhatia, S.; Sinha, R.K.

2008-01-01

In this paper, a methodology known as APSRA (Assessment of Passive System ReliAbility) has been employed for evaluation of the reliability of passive systems. The methodology has been applied to the passive containment isolation system (PCIS) of the Indian advanced heavy water reactor (AHWR). In the APSRA methodology, the passive system reliability evaluation is based on the failure probability of the system to carryout the desired function. The methodology first determines the operational characteristics of the system and the failure conditions by assigning a predetermined failure criterion. The failure surface is predicted using a best estimate code considering deviations of the operating parameters from their nominal states, which affect the PCIS performance. APSRA proposes to compare the code predictions with the test data to generate the uncertainties on the failure parameter prediction, which is later considered in the code for accurate prediction of failure surface of the system. Once the failure surface of the system is predicted, the cause of failure is examined through root diagnosis, which occurs mainly due to failure of mechanical components. The failure probability of these components is evaluated through a classical PSA treatment using the generic data. The reliability of the PCIS is evaluated from the probability of availability of the components for the success of the passive containment isolation system

24 CFR 597.502 - Nominations by economic development corporations or the District of Columbia.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Nominations by economic development corporations or the District of Columbia. 597.502 Section 597.502 Housing and Urban Development Regulations... development corporations or the District of Columbia. Any urban area nominated by an Economic Development...

Reliability Improved Design for a Safety System Channel

Energy Technology Data Exchange (ETDEWEB)

Oh, Eung Se; Kim, Yun Goo [KHNP, Daejeon (Korea, Republic of)

2016-05-15

Nowadays, these systems are implemented with a same platform type, such as a qualified programmable logic controller (PLC). The platform intensively uses digital communication with fiber-optic links to reduce cabling costs and to achieve effective signal isolation. These communication interface and redundancies within a channel increase the complexness of an overall system design. This paper proposes a simpler channel architecture design to reduce the complexity and to enhance overall channel reliability. Simplified safety channel configuration is proposed and the failure probabilities are compared with baseline safety channel configuration using an estimated generic value. The simplified channel configuration achieves 40 percent failure reduction compare to baseline safety channel configuration. If this configuration can be implemented within a processor module, overall safety channel reliability is increase and costs of fabrication and maintenance will be greatly reduced.

Reliability Improved Design for a Safety System Channel

International Nuclear Information System (INIS)

Oh, Eung Se; Kim, Yun Goo

2016-01-01

Nowadays, these systems are implemented with a same platform type, such as a qualified programmable logic controller (PLC). The platform intensively uses digital communication with fiber-optic links to reduce cabling costs and to achieve effective signal isolation. These communication interface and redundancies within a channel increase the complexness of an overall system design. This paper proposes a simpler channel architecture design to reduce the complexity and to enhance overall channel reliability. Simplified safety channel configuration is proposed and the failure probabilities are compared with baseline safety channel configuration using an estimated generic value. The simplified channel configuration achieves 40 percent failure reduction compare to baseline safety channel configuration. If this configuration can be implemented within a processor module, overall safety channel reliability is increase and costs of fabrication and maintenance will be greatly reduced

Study on the improvement of nuclear fuel cladding reliability

International Nuclear Information System (INIS)

Rheem, Karp Soon; Han, Jung Ho; Jeong, Yong Hwan; Lee, Deok Hyun

1987-12-01

In order to improve the nuclear fuel cladding reliability for high burn-up fuels, the corrosion resistance of laser beam surface treated and β-quenched zircaloys and the mechanical characteristics including fatigue, burst, and out-of-pile PCMI characteristics of heat treated zircaloys were investigated. In addition, the inadiation characteristics of Ko-Ri reactor fuel claddings was examined. It was found that the wasteside corrosion resistance of commercial zircaloys was improved remarkably by laser beam surface treatment. The out-of-pile transient cladding failures were investigated in terms of hoop stress versus time-to-failures by means of mandrel loading units at 25 deg C and 325 deg C. Fatigue characteristics of the β-quenched and as-received zircaloy cladding were investigated by using an internal oil pressurization method which can simulate the load-following operation cycle. The results were in good agreement with the existing data obtained by conventional methods for commercial zircaloys. Burst tests were performed with commercial and the β-quenched zircaloys in high pressure argon gas atmosphere as a function of burst temperature. The burst stress decreased linearly in the α phase region up to 600 deg C and hereafter the decrement of the burst stress decreased gradually with temperature in the β-phase region. For the first time, the burst characteristic of the irradiated zircaloy-4 cladding tubes released from Ko-Ri nuclear power unit 1 was investigated, and attempts were made to trace the cause of cladding failures by examining the failed structure and fret marks by debris. (Author)

An improved IEEE 802.11 protocol for reliable data transmission in power distribution fault diagnosis

Energy Technology Data Exchange (ETDEWEB)

Campoccia, F.; Di Silvestre, M.L.; Sanseverino, E.R.; Zizzo, G. [Palermo Univ., Palermo (Italy)

2010-10-15

In power systems, on-line transmission between local units and the central unit can be done by means of power line communications or wireless technology. During an electrical fault, the reliability of the distribution system depends on the security of the timely protective and restorative actions on the network. This paper focused on the WiFi system because of its economy and ease of installation. However, WiFi systems are typically managed by the IEEE 802.11 protocol, which is not reliable in terms of security in data communication. In WiFi networks, data is divided into packets and sent in succession to reduce errors within the radio channel. The IEEE 802.11 protocol has high probability for loss of packets or delay in their transmission. In order to ensure the reliability of data transmission times between two terminal units connected by WiFi stations, a new protocol was derived by modifying the IEEE 802.11. The improvements of the new protocol were highlighted and its capability for the diagnostic service was verified. The modified protocol eliminates the danger of collisions between packets and optimizes the transmission time for sending information. 6 refs., 7 tabs., 8 figs.

Reducing Variability of Workforce as a Tool to Improve Plan Reliability

DEFF Research Database (Denmark)

Shen, Yicheng; Zygmunt, Katarzyna Julia; Wandahl, Søren

2017-01-01

Variability of flow is recognized as one of the greatest obstacles to production management. Since the work flow and labour flow are two dominators of work performance, it is important to manage them simultaneously. The objective of this paper is to examine if an increased plan reliability could...... of the workforce flow does not necessarily shorten the project length, nevertheless it increases probability to finish the tasks within a critical path duration. Additionally, it was concluded, that reducing the variance of crew allocation can improve the productivity....... be reached by reducing the variance of a labour flow. Therefore, three different construction labour data sets have been examined by utilizing Monte Carlo Simulation, to analyze the probability to finish simulated projects within a certain time. The research findings revealed that reducing variance...

76 FR 25342 - Children's Health Protection Advisory Committee; Request for Nominations to the Children's Health...

Science.gov (United States)

2011-05-04

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9302-1] Children's Health Protection Advisory Committee; Request for Nominations to the Children's Health Protection Advisory Committee AGENCY: Environmental... nominations from a range of qualified candidates to be considered for appointment to its Children's Health...

NOMINAL VALUES FOR SELECTED SOLAR AND PLANETARY QUANTITIES: IAU 2015 RESOLUTION B3

Energy Technology Data Exchange (ETDEWEB)

Prša, Andrej [Villanova University, Department of Astrophysics and Planetary Science, 800 Lancaster Ave., Villanova, PA 19085 (United States); Harmanec, Petr [Astronomical Institute of the Charles University, Faculty of Mathematics and Physics, V Holešovičkách 2, CZ-180 00 Praha 8 (Czech Republic); Torres, Guillermo [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA 02138 (United States); Mamajek, Eric [Department of Physics and Astronomy, University of Rochester, Rochester, NY 14627-0171 (United States); Asplund, Martin [Research School of Astronomy and Astrophysics, Australian National University, Canberra, ACT 2611 (Australia); Capitaine, Nicole [SYRTE, Observatoire de Paris, PSL Research University, CNRS, Sorbonne Universités, UPMC, LNE, 61 avenue de lObservatoire, F-75014 Paris (France); Christensen-Dalsgaard, Jørgen [Stellar Astrophysics Centre, Department of Physics and Astronomy, Aarhus University, Ny Munkegade 120, DK-8000 Aarhus C (Denmark); Depagne, Éric [South African Astronomical Observatory, P.O. Box 9 Observatory, Cape Town (South Africa); Haberreiter, Margit [Physikalisch-Meteorologisches Observatorium Davos/World Radiation Center, Dorfstrasse 33, Davos (Switzerland); Hekker, Saskia [Max-Planck-Institut für Sonnensystemforschung, Justus-von-Liebig-Weg 3, D-37077 Göttingen (Germany); Hilton, James [US Naval Observatory, 3450 Massachusetts Ave. NW, Washington, DC 20392-5420 (United States); Kopp, Greg [Laboratory for Atmospheric and Space Physics, 1234 Innovation Drive, Boulder, CO 80303-7814 (United States); and others

2016-08-01

In this brief communication we provide the rationale for and the outcome of the International Astronomical Union (IAU) resolution vote at the XXIXth General Assembly in Honolulu, Hawaii, in 2015, on recommended nominal conversion constants for selected solar and planetary properties. The problem addressed by the resolution is a lack of established conversion constants between solar and planetary values and SI units: a missing standard has caused a proliferation of solar values (e.g., solar radius, solar irradiance, solar luminosity, solar effective temperature, and solar mass parameter) in the literature, with cited solar values typically based on best estimates at the time of paper writing. As precision of observations increases, a set of consistent values becomes increasingly important. To address this, an IAU Working Group on Nominal Units for Stellar and Planetary Astronomy formed in 2011, uniting experts from the solar, stellar, planetary, exoplanetary, and fundamental astronomy, as well as from general standards fields to converge on optimal values for nominal conversion constants. The effort resulted in the IAU 2015 Resolution B3, passed at the IAU General Assembly by a large majority. The resolution recommends the use of nominal solar and planetary values, which are by definition exact and are expressed in SI units. These nominal values should be understood as conversion factors only, not as the true solar/planetary properties or current best estimates. Authors and journal editors are urged to join in using the standard values set forth by this resolution in future work and publications to help minimize further confusion.

NOMINAL VALUES FOR SELECTED SOLAR AND PLANETARY QUANTITIES: IAU 2015 RESOLUTION B3

International Nuclear Information System (INIS)

Prša, Andrej; Harmanec, Petr; Torres, Guillermo; Mamajek, Eric; Asplund, Martin; Capitaine, Nicole; Christensen-Dalsgaard, Jørgen; Depagne, Éric; Haberreiter, Margit; Hekker, Saskia; Hilton, James; Kopp, Greg

2016-01-01

In this brief communication we provide the rationale for and the outcome of the International Astronomical Union (IAU) resolution vote at the XXIXth General Assembly in Honolulu, Hawaii, in 2015, on recommended nominal conversion constants for selected solar and planetary properties. The problem addressed by the resolution is a lack of established conversion constants between solar and planetary values and SI units: a missing standard has caused a proliferation of solar values (e.g., solar radius, solar irradiance, solar luminosity, solar effective temperature, and solar mass parameter) in the literature, with cited solar values typically based on best estimates at the time of paper writing. As precision of observations increases, a set of consistent values becomes increasingly important. To address this, an IAU Working Group on Nominal Units for Stellar and Planetary Astronomy formed in 2011, uniting experts from the solar, stellar, planetary, exoplanetary, and fundamental astronomy, as well as from general standards fields to converge on optimal values for nominal conversion constants. The effort resulted in the IAU 2015 Resolution B3, passed at the IAU General Assembly by a large majority. The resolution recommends the use of nominal solar and planetary values, which are by definition exact and are expressed in SI units. These nominal values should be understood as conversion factors only, not as the true solar/planetary properties or current best estimates. Authors and journal editors are urged to join in using the standard values set forth by this resolution in future work and publications to help minimize further confusion.

Evaluation of an advanced physical diagnosis course using consumer preferences methods: the nominal group technique.

Science.gov (United States)

Coker, Joshua; Castiglioni, Analia; Kraemer, Ryan R; Massie, F Stanford; Morris, Jason L; Rodriguez, Martin; Russell, Stephen W; Shaneyfelt, Terrance; Willett, Lisa L; Estrada, Carlos A

2014-03-01

Current evaluation tools of medical school courses are limited by the scope of questions asked and may not fully engage the student to think on areas to improve. The authors sought to explore whether a technique to study consumer preferences would elicit specific and prioritized information for course evaluation from medical students. Using the nominal group technique (4 sessions), 12 senior medical students prioritized and weighed expectations and topics learned in a 100-hour advanced physical diagnosis course (4-week course; February 2012). Students weighted their top 3 responses (top = 3, middle = 2 and bottom = 1). Before the course, 12 students identified 23 topics they expected to learn; the top 3 were review sensitivity/specificity and high-yield techniques (percentage of total weight, 18.5%), improving diagnosis (13.8%) and reinforce usual and less well-known techniques (13.8%). After the course, students generated 22 topics learned; the top 3 were practice and reinforce advanced maneuvers (25.4%), gaining confidence (22.5%) and learn the evidence (16.9%). The authors observed no differences in the priority of responses before and after the course (P = 0.07). In a physical diagnosis course, medical students elicited specific and prioritized information using the nominal group technique. The course met student expectations regarding education of the evidence-based physical examination, building skills and confidence on the proper techniques and maneuvers and experiential learning. The novel use for curriculum evaluation may be used to evaluate other courses-especially comprehensive and multicomponent courses.

Some improvements on adaptive genetic algorithms for reliability-related applications

Energy Technology Data Exchange (ETDEWEB)

Ye Zhisheng, E-mail: yez@nus.edu.s [Department of Industrial and Systems Engineering, National University of Singapore, Singapore 119 260 (Singapore); Li Zhizhong [Department of Industrial Engineering, Tsinghua University, beijing 100084 (China); Xie Min [Department of Industrial and Systems Engineering, National University of Singapore, Singapore 119 260 (Singapore)

2010-02-15

Adaptive genetic algorithms (GAs) have been shown to be able to improve GA performance in reliability-related optimization studies. However, there are different ways to implement adaptive GAs, some of which are even in conflict with each other. In this study, a simple parameter-adjusting method using mean and variance of each generation is introduced. This method is used to compare two of such conflicting adaptive GA methods: GAs with increasing mutation rate and decreasing crossover rate and GAs with decreasing mutation rate and increasing crossover rate. The illustrative examples indicate that adaptive GAs with decreasing mutation rate and increasing crossover rate finally yield better results. Furthermore, a population disturbance method is proposed to avoid local optimum solutions. This idea is similar to exotic migration to a tribal society. To solve the problem of large solution space, a variable roughening method is also embedded into GA. Two case studies are presented to demonstrate the effectiveness of the proposed method.

Some improvements on adaptive genetic algorithms for reliability-related applications

International Nuclear Information System (INIS)

Ye Zhisheng; Li Zhizhong; Xie Min

2010-01-01

Adaptive genetic algorithms (GAs) have been shown to be able to improve GA performance in reliability-related optimization studies. However, there are different ways to implement adaptive GAs, some of which are even in conflict with each other. In this study, a simple parameter-adjusting method using mean and variance of each generation is introduced. This method is used to compare two of such conflicting adaptive GA methods: GAs with increasing mutation rate and decreasing crossover rate and GAs with decreasing mutation rate and increasing crossover rate. The illustrative examples indicate that adaptive GAs with decreasing mutation rate and increasing crossover rate finally yield better results. Furthermore, a population disturbance method is proposed to avoid local optimum solutions. This idea is similar to exotic migration to a tribal society. To solve the problem of large solution space, a variable roughening method is also embedded into GA. Two case studies are presented to demonstrate the effectiveness of the proposed method.

77 FR 1722 - National Register of Historic Places; Notification of Pending Nominations and Related Actions

Science.gov (United States)

2012-01-11

... DEPARTMENT OF THE INTERIOR National Park Service [NPS-WASO-NRNHL-1212-9138; 2200-3200-665] National Register of Historic Places; Notification of Pending Nominations and Related Actions Nominations... and Architecture MPS) 318 S. Houston Ave., Russellville, 11001049 Pulaski County Capitol--Main...

Reliability data book

International Nuclear Information System (INIS)

Bento, J.P.; Boerje, S.; Ericsson, G.; Hasler, A.; Lyden, C.O.; Wallin, L.; Poern, K.; Aakerlund, O.

1985-01-01

The main objective for the report is to improve failure data for reliability calculations as parts of safety analyses for Swedish nuclear power plants. The work is based primarily on evaluations of failure reports as well as information provided by the operation and maintenance staff of each plant. In the report are presented charts of reliability data for: pumps, valves, control rods/rod drives, electrical components, and instruments. (L.E.)

Reliability in automotive and mechanical engineering determination of component and system reliability

CERN Document Server

Bertsche, Bernd

2008-01-01

In the present contemporary climate of global competition in every branch of engineering and manufacture it has been shown from extensive customer surveys that above every other attribute, reliability stands as the most desired feature in a finished product. To survive this relentless fight for survival any organisation, which neglect the plea of attaining to excellence in reliability, will do so at a serious cost Reliability in Automotive and Mechanical Engineering draws together a wide spectrum of diverse and relevant applications and analyses on reliability engineering. This is distilled into this attractive and well documented volume and practising engineers are challenged with the formidable task of simultaneously improving reliability and reducing the costs and down-time due to maintenance. The volume brings together eleven chapters to highlight the importance of the interrelated reliability and maintenance disciplines. They represent the development trends and progress resulting in making this book ess...

Bootstrap analysis of designed experiments for reliability improvement with a non-constant scale parameter

International Nuclear Information System (INIS)

Wang, Guodong; He, Zhen; Xue, Li; Cui, Qingan; Lv, Shanshan; Zhou, Panpan

2017-01-01

Factors which significantly affect product reliability are of great interest to reliability practitioners. This paper proposes a bootstrap-based methodology for identifying significant factors when both location and scale parameters of the smallest extreme value distribution vary over experimental factors. An industrial thermostat experiment is presented, analyzed, and discussed as an illustrative example. The analysis results show that 1) the misspecification of a constant scale parameter may lead to misidentify spurious effects; 2) the important factors identified by different bootstrap methods (i.e., percentile bootstrapping, bias-corrected percentile bootstrapping, and bias-corrected and accelerated percentile bootstrapping) are different; 3) the number of factors affecting 10th percentile lifetime significantly is less than the number of important factors identified at 63.21th percentile. - Highlights: • Product reliability is improved by design of experiments under both scale and location parameters of smallest extreme value distribution vary with experimental factors. • A bootstrap-based methodology is proposed to identify important factors which affect 100pth lifetime percentile significantly. • Bootstrapping confidence intervals associating experimental factors are obtained by using three bootstrap methods (i.e., percentile bootstrapping, bias-corrected percentile bootstrapping, and bias-corrected and accelerated percentile bootstrapping). • The important factors identified by different bootstrap methods are different. • The number of factors affecting 10th percentile significantly is less than the number of important factors identified at 63.21th percentile.

Reliability analysis techniques in power plant design

International Nuclear Information System (INIS)

Chang, N.E.

1981-01-01

An overview of reliability analysis techniques is presented as applied to power plant design. The key terms, power plant performance, reliability, availability and maintainability are defined. Reliability modeling, methods of analysis and component reliability data are briefly reviewed. Application of reliability analysis techniques from a design engineering approach to improving power plant productivity is discussed. (author)

77 FR 37705 - Notice of Call for Nominations for the Wild Horse and Burro Advisory Board

Science.gov (United States)

2012-06-22

.... Individuals may nominate themselves or others. Any individual or organization may nominate one or more persons.... If you are appointed as an advisor, the information will be retained by the appointing official for...

78 FR 9420 - National Register of Historic Places; Notification of Pending Nominations and Related Actions

Science.gov (United States)

2013-02-08

... DEPARTMENT OF THE INTERIOR National Park Service [NPS-WASO-NRNHL-12128; 2200-3200-665] National Register of Historic Places; Notification of Pending Nominations and Related Actions Nominations for the... Bacon--Harding Farm, (Cobblestone Architecture of New York State MPS), 3077 Oak Orchard Rd., Gaines...

Improvements in the consistency of fabrication and the reliability of nuclear fuels through quality assurance

International Nuclear Information System (INIS)

Sifferlen, R.

1976-01-01

By establishing correlations between rejection level and fabrication parameters, quality assurance can guide corrective action for improving the consistency of fabrication and the reliability of fuel elements. The author cites examples relating to the quality of the uranium in metallic fuels, the influence of the parent metal on the welding of zirconium alloys, the behaviour of the springs inside the cladding during the welding of plugs and the behaviour of uranium oxide pellets. (author)

Coherence of Radial Implicative Fuzzy Systems with Nominal Consequents

Czech Academy of Sciences Publication Activity Database

Coufal, David

-, č. 4 (2006), s. 60-66 ISSN 1509-4553 R&D Projects: GA MŠk 1M0545 Institutional research plan: CEZ:AV0Z10300504 Keywords : implicative fuzzy system * radial fuzzy system * nominal output space * coherence Subject RIV: IN - Informatics, Computer Science

Nurses' Educational Needs Assessment for Financial Management Education Using the Nominal Group Technique

OpenAIRE

Wonjung Noh, PhD, RN; Ji Young Lim, PhD, RN, MBA

2015-01-01

Purpose: The purpose of this study was to identify the financial management educational needs of nurses in order to development an educational program to strengthen their financial management competencies. Methods: Data were collected from two focus groups using the nominal group technique. The study consisted of three steps: a literature review, focus group discussion using the nominal group technique, and data synthesis. Results: After analyzing the results, nine key components were s...

Improving Phrap-based assembly of the rat using "reliable" overlaps.

Directory of Open Access Journals (Sweden)

Michael Roberts

2008-03-01

Full Text Available The assembly methods used for whole-genome shotgun (WGS data have a major impact on the quality of resulting draft genomes. We present a novel algorithm to generate a set of "reliable" overlaps based on identifying repeat k-mers. To demonstrate the benefits of using reliable overlaps, we have created a version of the Phrap assembly program that uses only overlaps from a specific list. We call this version PhrapUMD. Integrating PhrapUMD and our "reliable-overlap" algorithm with the Baylor College of Medicine assembler, Atlas, we assemble the BACs from the Rattus norvegicus genome project. Starting with the same data as the Nov. 2002 Atlas assembly, we compare our results and the Atlas assembly to the 4.3 Mb of rat sequence in the 21 BACs that have been finished. Our version of the draft assembly of the 21 BACs increases the coverage of finished sequence from 93.4% to 96.3%, while simultaneously reducing the base error rate from 4.5 to 1.1 errors per 10,000 bases. There are a number of ways of assessing the relative merits of assemblies when the finished sequence is available. If one views the overall quality of an assembly as proportional to the inverse of the product of the error rate and sequence missed, then the assembly presented here is seven times better. The UMD Overlapper with options for reliable overlaps is available from the authors at http://www.genome.umd.edu. We also provide the changes to the Phrap source code enabling it to use only the reliable overlaps.

Improvement of AC motor reliability from technique standardization

International Nuclear Information System (INIS)

Muniz, P.R.; Faria, M.D.R.; Mendes, M.P.; Silva, J.N.; Dos Santos, J.D.

2005-01-01

The purpose of this paper is to explain the increase of reliability of motors serviced in the Electrical Maintenance Shop of Companhia Siderurgica de Tubarao by standardization of the technique based on Brazilian and International Standards, manufacturer's recommendations and the experience of the maintenance staff. (author)

78 FR 67372 - Evaluation of Trichloroethylene for the Report on Carcinogens; Request for Nominations of...

Science.gov (United States)

2013-11-12

... Trichloroethylene for the Report on Carcinogens; Request for Nominations of Scientific Experts for Proposed Webinar... association of exposure to trichloroethylene (TCE) and cancer. DATES: The deadline for receipt of nominations.../Trichloroethylene.pdf ). The NTP selected TCE for evaluation to determine whether a change in its listing status in...

White House nominates nuclear commissioner

Science.gov (United States)

Showstack, Randy

2012-06-01

Just 3 days after U.S. Nuclear Regulatory Commission chairman Gregory Jaczko announced his intention to resign (Eos, 93(22), 211, doi:10.1029/2012EO220005, 2012), President Barack Obama nominated Allison Macfarlane to serve out the remainder of Jaczko's term, through June 2013. The White House announced that upon her appointment, Macfarlane would be designated as chair of the commission. Macfarlane is an associate professor of environmental science and policy at George Mason University. A member of the Blue Ribbon Commission on America's Nuclear Future from March 2010 to January 2012, she is also the author of the 2006 book Uncertainty Underground: Yucca Mountain and the Nation's High-Level Nuclear Waste and is an AGU member.

Equipment Reliability Process in Krsko NPP

International Nuclear Information System (INIS)

Gluhak, M.

2016-01-01

To ensure long-term safe and reliable plant operation, equipment operability and availability must also be ensured by setting a group of processes to be established within the nuclear power plant. Equipment reliability process represents the integration and coordination of important equipment reliability activities into one process, which enables equipment performance and condition monitoring, preventive maintenance activities development, implementation and optimization, continuous improvement of the processes and long term planning. The initiative for introducing systematic approach for equipment reliability assuring came from US nuclear industry guided by INPO (Institute of Nuclear Power Operations) and by participation of several US nuclear utilities. As a result of the initiative, first edition of INPO document AP-913, 'Equipment Reliability Process Description' was issued and it became a basic document for implementation of equipment reliability process for the whole nuclear industry. The scope of equipment reliability process in Krsko NPP consists of following programs: equipment criticality classification, preventive maintenance program, corrective action program, system health reports and long-term investment plan. By implementation, supervision and continuous improvement of those programs, guided by more than thirty years of operating experience, Krsko NPP will continue to be on a track of safe and reliable operation until the end of prolonged life time. (author).

Study on the reliability of large coal-fired and nuclear power plants. Factors affecting power plant reliability. Volume I. Final report

International Nuclear Information System (INIS)

1975-01-01

The study consisted of a comparative evaluation of 2 nuclear units (Indian Point 2 - Consolidated Edison of New York, Turkey Point 4 - Florida Power and Light Company) and 2 coal-fired units (Bull Run and Widows Creek Unit 8 - Tennessee Valley Authority). The purpose of the study was to identify and assess the underlying causes of unit reliability and the causes of the observed differences in reliability performance of the units. Recommended actions for improving the reliability of one of the study units was to be presented in a format useful to other utility companies for improving reliability of their generating units. The emphasis of the study was on the aspects of management, manning, operations, and maintenance which had a significant impact on unit reliability. Volume 1 includes a summary, a description of the major findings from the comparative evaluation, conclusions based on these findings, and recommendations for improving the reliability of the below average units

Computer-Based Methods for Collecting Peer Nomination Data: Utility, Practice, and Empirical Support.

Science.gov (United States)

van den Berg, Yvonne H M; Gommans, Rob

2017-09-01

New technologies have led to several major advances in psychological research over the past few decades. Peer nomination research is no exception. Thanks to these technological innovations, computerized data collection is becoming more common in peer nomination research. However, computer-based assessment is more than simply programming the questionnaire and asking respondents to fill it in on computers. In this chapter the advantages and challenges of computer-based assessments are discussed. In addition, a list of practical recommendations and considerations is provided to inform researchers on how computer-based methods can be applied to their own research. Although the focus is on the collection of peer nomination data in particular, many of the requirements, considerations, and implications are also relevant for those who consider the use of other sociometric assessment methods (e.g., paired comparisons, peer ratings, peer rankings) or computer-based assessments in general. © 2017 Wiley Periodicals, Inc.

Dormancy effects on the reliability of nuclear thermal propulsion systems for long-term manned space missions

International Nuclear Information System (INIS)

Shooman, M.L.; Sforza, P.M.

1993-01-01

This paper explores the effects of dormancy on the reliability of a Nuclear Thermal Propulsion (NTP) system for long-term manned space missions, such as Mars exploration. Dormancy refers to the portion of space systems operation where the power and stress levels are significantly reduced from nominal values and the authors have identified dormancy as a significant effect. Three approaches are used to evaluate the relative importance of failure rates during dormant operation: use of failure rate models involving dormancy, power cycling and fully energized operation; study of data bases which include both dormant and energized failure rates; predictions based on an Arrhenius rate process formulation. The results of these approaches suggest that for a long term manned mission the dormancy, cycle, and energized failure rates will all be important. Reliability in the energized state normally receives utmost attention and care during design, however, unless equal attention is directed to dormancy, the mission reliability may be severely compromised

Stochastic network interdiction optimization via capacitated network reliability modeling and probabilistic solution discovery

International Nuclear Information System (INIS)

Ramirez-Marquez, Jose Emmanuel; Rocco S, Claudio M.

2009-01-01

This paper introduces an evolutionary optimization approach that can be readily applied to solve stochastic network interdiction problems (SNIP). The network interdiction problem solved considers the minimization of the cost associated with an interdiction strategy such that the maximum flow that can be transmitted between a source node and a sink node for a fixed network design is greater than or equal to a given reliability requirement. Furthermore, the model assumes that the nominal capacity of each network link and the cost associated with their interdiction can change from link to link and that such interdiction has a probability of being successful. This version of the SNIP is for the first time modeled as a capacitated network reliability problem allowing for the implementation of computation and solution techniques previously unavailable. The solution process is based on an evolutionary algorithm that implements: (1) Monte-Carlo simulation, to generate potential network interdiction strategies, (2) capacitated network reliability techniques to analyze strategies' source-sink flow reliability and, (3) an evolutionary optimization technique to define, in probabilistic terms, how likely a link is to appear in the final interdiction strategy. Examples for different sizes of networks are used throughout the paper to illustrate the approach

Electrical Performance and Reliability Improvement of Amorphous-Indium-Gallium-Zinc-Oxide Thin-Film Transistors with HfO₂ Gate Dielectrics by CF₄ Plasma Treatment.

Science.gov (United States)

Fan, Ching-Lin; Tseng, Fan-Ping; Tseng, Chiao-Yuan

2018-05-17

In this work, amorphous indium-gallium-zinc oxide thin-film transistors (a-IGZO TFTs) with a HfO₂ gate insulator and CF₄ plasma treatment was demonstrated for the first time. Through the plasma treatment, both the electrical performance and reliability of the a-IGZO TFT with HfO₂ gate dielectric were improved. The carrier mobility significantly increased by 80.8%, from 30.2 cm²/V∙s (without treatment) to 54.6 cm²/V∙s (with CF₄ plasma treatment), which is due to the incorporated fluorine not only providing an extra electron to the IGZO, but also passivating the interface trap density. In addition, the reliability of the a-IGZO TFT with HfO₂ gate dielectric has also been improved by the CF₄ plasma treatment. By applying the CF₄ plasma treatment to the a-IGZO TFT, the hysteresis effect of the device has been improved and the device's immunity against moisture from the ambient atmosphere has been enhanced. It is believed that the CF₄ plasma treatment not only significantly improves the electrical performance of a-IGZO TFT with HfO₂ gate dielectric, but also enhances the device's reliability.

Pre-service mathematics student teachers’ conceptions of nominal and effective interest rates

Directory of Open Access Journals (Sweden)

Judah P. Makonye

2017-04-01

Full Text Available The general public consumes financial products such as loans that are administered in the realm of nominal and effective interest rates. It is debatable if most consumers really understand how these rates function. This article explores the conceptions that student teachers have about nominal and effective interest rates. The APOS theory illuminates analysis of students’ levels of conception. Seventy second-year mathematics students’ responses to Grade 12 tasks on effective and nominal interest rates were analysed, after which 12 students were interviewed about their mathematical thinking in solving the tasks. The findings varied. While some students could not do the tasks due to erratic use of formulae (algebra, I ascertained that some students obtained correct answers through scrupulous adherence to the external prompt of formulae. Most of those students remained stuck at the action and process stages and could not view their processes as mathematical objects. A few students had reached the object and schema stages, showing mature understanding of the relationship between nominal and effective interest rates. As most students remained at the operational stages rather than the structural, the findings accentuate that when teaching this topic, teachers ought to take their time to build learners’ schema for these notions. They need to guide their learners through the necessary action-process-object loop and refrain from introducing students to formulae too soon as this stalls their advancement to the object and schema stages which are useful in making them smart consumers of financial products.

Photovoltaic Module Reliability Workshop 2010: February 18-19, 2010

Energy Technology Data Exchange (ETDEWEB)

Kurtz, J.

2013-11-01

NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

Photovoltaic Module Reliability Workshop 2011: February 16-17, 2011

Energy Technology Data Exchange (ETDEWEB)

Kurtz, S.

2013-11-01

NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

Photovoltaic Module Reliability Workshop 2013: February 26-27, 2013

Energy Technology Data Exchange (ETDEWEB)

Kurtz, S.

2013-10-01

NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

Photovoltaic Module Reliability Workshop 2014: February 25-26, 2014

Energy Technology Data Exchange (ETDEWEB)

Kurtz, S.

2014-02-01

NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

Gender and classifiers in concurrent systems: Refining the typology of nominal classification

Directory of Open Access Journals (Sweden)

Sebastian Fedden

2017-04-01

Full Text Available Some languages have both gender and classifiers, contrary to what was once believed possible. We use these interesting languages as a unique window onto nominal classification. They provide the impetus for a new typology, based on the degree of orthogonality of the semantic systems and the degree of difference of the forms realizing them. This nine-way typology integrates traditional gender, traditional classifiers and – importantly – the many recently attested phenomena lying between. Besides progress specifically in understanding nominal classification, our approach provides clarity on the wider theoretical issue of single versus concurrent featural systems.

Promoting Justices: Media Coverage of Judicial Nominations in Israel

Directory of Open Access Journals (Sweden)

Bryna Bogoch

2014-10-01

Full Text Available This paper compares the framing of the coverage of judicial appointments in Israel in 2008 in two newspapers with nomination news from preceding years and to the patterns of press coverage in the U.S. A content analysis of 101 Supreme Court nomination articles indicated that unlike the political frame of American coverage, the press in Israel preserves its ostensible commitment to the professionalism of judges while linking the Supreme Court to political maneuvering in the selection of candidates. These findings are discussed within the context of the media's role in constructing judicial nominations as a debate about the role of the Supreme Court in Israeli society. Este artículo compara el marco de la cobertura de los nombramientos judiciales en Israel en 2008 en dos periódicos, con noticias de nombramientos de años anteriores y en los Estados Unidos, con los patrones de cobertura de prensa en los EE.UU. Un análisis de contenido de 101 artículos de nombramientos de la Corte Suprema indicó que, a diferencia del marco político de la cobertura de América, la prensa en Israel consierva su aparente compromiso con la profesionalidad de los jueces, a pesar de que relaciona la Corte Suprema con maniobras políticas en la selección de candidatos. Estos resultados se discuten en el contexto del papel de los medios de comunicación en la construcción de los nombramientos judiciales como un debate sobre el papel de la Corte Suprema en la sociedad israelí. DOWNLOAD THIS PAPER FROM SSRN: http://ssrn.com/abstract=2478756

76 FR 71561 - Request for Nominations of Candidates to the EPA's Science Advisory Board (SAB) Chemical...

Science.gov (United States)

2011-11-18

... financial conflicts of interest; --Absence of an appearance of a lack of impartiality; --Background and... candidates, EPA encourages nominations of women and men of all racial and ethnic groups. Nominators are asked... statutory conflict between that person's public responsibilities as a Special Government Employee and...

Researching and improving the reliability of reactor protection system of Qinshan nuclear power plant

International Nuclear Information System (INIS)

Jiang Zuyue; Sheng Jiannan

1997-01-01

Due to the original design defects of the Reactor Protection System (RPS) of Qinshan Nuclear Power Plant, this system has brought about a number of reactor shutdown accidents and Engineered Safety Features (ESF) mis-activation events which have seriously endangered safe and steady operation of the nuclear power plant. So over three years have been spent on research on the reform of the original design on the premise that the general wiring of the system should remain the same and that the system size should also remain small to be contained in the original cabinets. The following improvements were made: (1) Increase the system's anti-disturbance capability. The system's zero volt bus floating designs were modified to surmount the disturbance resulting from the bad isolation performance of impedance-isolated amplifier; Double grounds have been added to logical modules to surmount the disturbance resulting from zero volt floating bus during the replacement of single module with two connectors; The opto-coupling circuit in its oscillation input stage of Engineered Safety Features have been improved to increase its reliability. (2)Modify to output activation part of the system. The new type of output relays were selected and the relay activation circuits were redesigned in which switcher activation mode is used instead of amplifier activation mode so as to increase the reliability of relay operation and reduce the power consumption; CMOS buffer gates in the input and output stage of the circuit were used to match TTL circuits to CMOS circuits of the system

Daily Readiness Huddles in Radiology-Improving Communication, Coordination, and Problem-Solving Reliability.

Science.gov (United States)

Donnelly, Lane F

Deploying an intentional daily management process is a key part to create high-reliability culture. Key components described in the literature for a successfully daily management process include leadership standard work, visual controls, daily accountability processes, and the discipline to stick to the process over the long term. We believe that the institution of a daily readiness huddle has helped us better coordinate and communicate as a department and improved our ability to deliver imaging services on a daily basis. The daily readiness huddle has enabled us to more rapidly identify issues and has brought accountability to seeing solutions to those issues brought to fruition. In addition, it has helped with team building, including between the radiologists and the nonphysician staff. Copyright © 2017 Elsevier Inc. All rights reserved.

78 FR 7784 - Health Information Technology Policy Committee Nomination Letters

Science.gov (United States)

2013-02-04

... GOVERNMENT ACCOUNTABILITY OFFICE Health Information Technology Policy Committee Nomination Letters.... SUMMARY: The American Recovery and Reinvestment Act of 2009 (ARRA) established the Health Information Technology Policy Committee (Health IT Policy Committee) and gave the Comptroller General responsibility for...

76 FR 77997 - Office of External Affairs and Environmental Education; Request for Nominations of Candidates for...

Science.gov (United States)

2011-12-15

... nominations of diverse candidates, EPA encourages nominations of women and men of all racial and ethnic groups... looking for individuals who demonstrate the ability to make the time commitment, strong leadership skills, strong analytical skills, strong communication and writing skills, the ability to evaluate programs in an...

77 FR 6797 - Request for Nominations of Experts for EPA Science Advisory Board Scientific and Technological...

Science.gov (United States)

2012-02-09

... obtain nominations of diverse candidates, EPA encourages nominations of women and men of all racial and... factors); (b) availability and willingness to serve; (c) absence of financial conflicts of interest; (d... Office's evaluation of an absence of financial conflicts of interest will include a review of the...

78 FR 15370 - Request for Nominations of Candidates To Serve on the Advisory Committee on Immunization...

Science.gov (United States)

2013-03-11

... for Nominations of Candidates To Serve on the Advisory Committee on Immunization Practices, Centers... nominations for membership on the Advisory Committee on Immunization Practices (ACIP). The ACIP consists of 15 experts in fields associated with immunization, who are selected by the Secretary of the United States...

Does a web-based feedback training program result in improved reliability in clinicians' ratings of the Global Assessment of Functioning (GAF) Scale?

Science.gov (United States)

Støre-Valen, Jakob; Ryum, Truls; Pedersen, Geir A F; Pripp, Are H; Jose, Paul E; Karterud, Sigmund

2015-09-01

The Global Assessment of Functioning (GAF) Scale is used in routine clinical practice and research to estimate symptom and functional severity and longitudinal change. Concerns about poor interrater reliability have been raised, and the present study evaluated the effect of a Web-based GAF training program designed to improve interrater reliability in routine clinical practice. Clinicians rated up to 20 vignettes online, and received deviation scores as immediate feedback (i.e., own scores compared with expert raters) after each rating. Growth curves of absolute SD scores across the vignettes were modeled. A linear mixed effects model, using the clinician's deviation scores from expert raters as the dependent variable, indicated an improvement in reliability during training. Moderation by content of scale (symptoms; functioning), scale range (average; extreme), previous experience with GAF rating, profession, and postgraduate training were assessed. Training reduced deviation scores for inexperienced GAF raters, for individuals in clinical professions other than nursing and medicine, and for individuals with no postgraduate specialization. In addition, training was most beneficial for cases with average severity of symptoms compared with cases with extreme severity. The results support the use of Web-based training with feedback routines as a means to improve the reliability of GAF ratings performed by clinicians in mental health practice. These results especially pertain to clinicians in mental health practice who do not have a masters or doctoral degree. (c) 2015 APA, all rights reserved.

Improving the reliability of peer-reviewed publications: We are all in it together

Directory of Open Access Journals (Sweden)

Stephen A. Bustin

2016-03-01

Full Text Available The current, and welcome, focus on standardization of techniques and transparency of reporting in the biomedical, peer-reviewed literature is commendable. However, that focus has been intermittent as well as lacklustre and so failed to tackle the alarming lack of reliability and reproducibly of biomedical research. Authors have access to numerous recommendations, ranging from simple standards dealing with technical issues to those regulating clinical trials, suggesting that improved reporting guidelines are not the solution. The elemental solution is for editors to require meticulous implementation of their journals’ instructions for authors and reviewers and stipulate that no paper is published without a transparent, complete and accurate materials and methods section.

Statistical evaluation of the degree of nominal convergence of the inflation rate in Romania

Directory of Open Access Journals (Sweden)

Mihai GHEORGHE

2011-07-01

Full Text Available Nominal convergence is a process that is characterised by the gradual harmonisation, to a relatively high degree, of the national institutions and policies of the Member States with those of the EU, in the monetary and financial fields.The birth of nominal convergence is marked by the Maastricht Treaty, by means of which the criteria required for adopting the euro were established. One of the criteria refers to price stability (inflation rate, which is measured by the Harmonised Index of Consumer Prices. A Member State meets this criterion if it has a price performance that is sustainable and an average rate of inflation, observed over a period of one year before the examination,that does not exceed by more than 1.5 percentage point that of, at most, the three best performing Member States in terms of price stability.The article proposes a model for the statistical evaluation of the degree to which the nominal convergence criterion related to price stability is met. The evaluation is based on the following pillars: a theoretical synthesis of the Harmonised Index of Consumer Prices, a statistical analysis concerning the evolution of inflation in Romania and the gap vis-à-vis the reference value for meeting the nominal convergence criterion.

INPO's role in the improvement of nuclear plant safety and reliability

International Nuclear Information System (INIS)

Pate, Z.T.

1985-01-01

The Institute of Nuclear Power Operations (INPO) is a nonprofit, nongovernment corporation dedicated to promoting safe and reliable operation and quality construction of nuclear power plants. The institute is supported by the US nuclear utility industry. All US utilities building or operating nuclear power plants are INPO members. INPO's many activities fall within four major program areas: (1) Evaluations: INPO conducts detailed evaluations of all US operating plants, utility corporate support of nuclear programs, and nuclear projects under active construction. Events analysis and information exchange: INPO reviews plant reports of abnormal or unusual events and reports the lessons learned to the industry. INPO also fosters improved industry communications through a worldwide telecommunications network. (3) Training and accreditation: INPO assists utilities, including international participants, in developing quality training programs; and (4) Assistance: the Institute provides various forms of assistance to members and participants. INPO places emphasis on visits to facilities to aid members and participants in various program or operational areas

Advanced control systems to improve nuclear power plant reliability and efficiency

International Nuclear Information System (INIS)

1997-07-01

The TECDOC is the result of a series of an advisory and consultants meetings held by the IAEA in 1995-1996 in Vienna (March 1995), in Erlangen Germany (December 1995), in Garching, Germany (June 1996) and in Vienna (November 1996). It was prepared with the participation and contributions of experts from Austria, Canada, Finland, France, Germany, the Republic of Korea, Norway, the Russian Federation, the United Kingdom and the United States of America. The publication not only describes advanced control systems for the improvement of nuclear power plant reliability and efficiency, but also provides a road map to guide interested readers to plan and execute an advanced instrumentation and control project. The subjects include: identification of needs and requirements, justification for safety and user acceptance, and the development of an engineering process. The report should be of interest to nuclear power plant staff, I and C system designers and integrators as well as regulators and researchers. Refs, figs, tabs

Advanced control systems to improve nuclear power plant reliability and efficiency

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-07-01

The TECDOC is the result of a series of an advisory and consultants meetings held by the IAEA in 1995-1996 in Vienna (March 1995), in Erlangen Germany (December 1995), in Garching, Germany (June 1996) and in Vienna (November 1996). It was prepared with the participation and contributions of experts from Austria, Canada, Finland, France, Germany, the Republic of Korea, Norway, the Russian Federation, the United Kingdom and the United States of America. The publication not only describes advanced control systems for the improvement of nuclear power plant reliability and efficiency, but also provides a road map to guide interested readers to plan and execute an advanced instrumentation and control project. The subjects include: identification of needs and requirements, justification for safety and user acceptance, and the development of an engineering process. The report should be of interest to nuclear power plant staff, I and C system designers and integrators as well as regulators and researchers. Refs, figs, tabs.

Modeling high-Power Accelerators Reliability-SNS LINAC (SNS-ORNL); MAX LINAC (MYRRHA)

International Nuclear Information System (INIS)

Pitigoi, A. E.; Fernandez Ramos, P.

2013-01-01

Improving reliability has recently become a very important objective in the field of particle accelerators. The particle accelerators in operation are constantly undergoing modifications, and improvements are implemented using new technologies, more reliable components or redundant schemes (to obtain more reliability, strength, more power, etc.) A reliability model of SNS (Spallation Neutron Source) LINAC has been developed within MAX project and analysis of the accelerator systems reliability has been performed within the MAX project, using the Risk Spectrum reliability analysis software. The analysis results have been evaluated by comparison with the SNS operational data. Results and conclusions are presented in this paper, oriented to identify design weaknesses and provide recommendations for improving reliability of MYRRHA linear accelerator. The SNS reliability model developed for the MAX preliminary design phase indicates possible avenues for further investigation that could be needed to improve the reliability of the high-power accelerators, in view of the future reliability targets of ADS accelerators.

Reliability of Power Electronic Converter Systems

DEFF Research Database (Denmark)

-link capacitance in power electronic converter systems; wind turbine systems; smart control strategies for improved reliability of power electronics system; lifetime modelling; power module lifetime test and state monitoring; tools for performance and reliability analysis of power electronics systems; fault...... for advancing the reliability, availability, system robustness, and maintainability of PECS at different levels of complexity. Drawing on the experience of an international team of experts, this book explores the reliability of PECS covering topics including an introduction to reliability engineering in power...... electronic converter systems; anomaly detection and remaining-life prediction for power electronics; reliability of DC-link capacitors in power electronic converters; reliability of power electronics packaging; modeling for life-time prediction of power semiconductor modules; minimization of DC...

75 FR 14622 - Call for Nominations for Resource Advisory Councils

Science.gov (United States)

2010-03-26

..., Bureau of Land Management, Correspondence, International, and Advisory Committee Office, 1849 C Street..., experience, and knowledge of the geographical area of the RAC. Nominees should demonstrate a commitment to... issue press releases providing additional information for submitting nominations, with specifics about...

76 FR 48174 - Notice of Call for Nominations for the Wild Horse and Burro Advisory Board

Science.gov (United States)

2011-08-08

... husbandry, or natural resource management). Individuals may nominate themselves or others. Any individual or organization may nominate one or more persons to serve on the Board. The following information must accompany... appointed as an advisor, the information will be retained by the appointing official for as long as you...

Developing Reliable Life Support for Mars

Science.gov (United States)

Jones, Harry W.

2017-01-01

A human mission to Mars will require highly reliable life support systems. Mars life support systems may recycle water and oxygen using systems similar to those on the International Space Station (ISS). However, achieving sufficient reliability is less difficult for ISS than it will be for Mars. If an ISS system has a serious failure, it is possible to provide spare parts, or directly supply water or oxygen, or if necessary bring the crew back to Earth. Life support for Mars must be designed, tested, and improved as needed to achieve high demonstrated reliability. A quantitative reliability goal should be established and used to guide development t. The designers should select reliable components and minimize interface and integration problems. In theory a system can achieve the component-limited reliability, but testing often reveal unexpected failures due to design mistakes or flawed components. Testing should extend long enough to detect any unexpected failure modes and to verify the expected reliability. Iterated redesign and retest may be required to achieve the reliability goal. If the reliability is less than required, it may be improved by providing spare components or redundant systems. The number of spares required to achieve a given reliability goal depends on the component failure rate. If the failure rate is under estimated, the number of spares will be insufficient and the system may fail. If the design is likely to have undiscovered design or component problems, it is advisable to use dissimilar redundancy, even though this multiplies the design and development cost. In the ideal case, a human tended closed system operational test should be conducted to gain confidence in operations, maintenance, and repair. The difficulty in achieving high reliability in unproven complex systems may require the use of simpler, more mature, intrinsically higher reliability systems. The limitations of budget, schedule, and technology may suggest accepting lower and

18 CFR 39.3 - Electric Reliability Organization certification.

Science.gov (United States)

2010-04-01

... operators of the Bulk-Power System, and other interested parties for improvement of the Electric Reliability... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Electric Reliability..., Reliability Standards that provide for an adequate level of reliability of the Bulk-Power System, and (2) Has...

Language Mixing in the Nominal Phrase: Implications of a Distributed Morphology Perspective

Directory of Open Access Journals (Sweden)

Michèle Burkholder

2018-04-01

Full Text Available This paper investigates a pattern found in Spanish–English mixed language corpora whereby it is common to switch from a Spanish determiner to an English noun (e.g., la house, ‘the house’, but rare to switch from an English determiner to a Spanish noun (e.g., the casa, ‘the house’. Unlike previous theoretical accounts of this asymmetry, that which is proposed here follows assumptions of the Distributed Morphology (DM framework, specifically those regarding the relationship between grammatical gender and nominal declension class in Spanish. Crucially, and again in contrast to previous accounts, it is demonstrated that this approach predicts no such asymmetry for French–English. This hypothesis is tested experimentally using an acceptability judgment task with self-paced reading, and as expected, no evidence is found for an asymmetry. This experiment is also used to test predictions regarding how English nominal roots in mixed nominal phrases are assigned grammatical gender, and the impact of language background factors such as age of acquisition. Evidence is found that bilinguals attempt to assign analogical gender if possible, but that late sequential bilinguals have a stronger preference for this option than do simultaneous bilinguals.

Nominal power density analysis of thermoelectric pins with non-constant cross sections

International Nuclear Information System (INIS)

Shi, Yaoguang; Mei, Deqing; Yao, Zhehe; Wang, Yancheng; Liu, Haiyan; Chen, Zichen

2015-01-01

Highlights: • Nominal power density of TEGs with non-constant cross sections pins is analyzed. • An analytical model of nominal power density (NPD) is developed. • Influences of shape parameter on NPD for different geometric pins are investigated. • Effects of dimensionless efficiency and the temperature ratio on NPD are examined. - Abstract: The investigation of the geometric structure of TEG (thermoelectric generator) pins is essential, as their geometry determines the performance of devices. In this study, nominal power density (NPD) is used to find a better geometric structure of thermoelectric pins of TEGs, since a comparison of maximum dimensionless efficiencies for different geometric pins cannot be used to identify the optimum geometry. The influence of shape parameter on NPD for TEG pins in linear, quadratic and exponential cross-sectional functions is studied. The NPD decreases when the shape parameter increases for different geometric pins, while the maximum values of NPD are the same. Then, the effects of dimensionless efficiency and the temperature ratio on the NPD are analyzed. The NPD decreases with the increase in dimensionless efficiency and temperature ratio. Pins with linear variation in cross section have the highest NPD among the three geometries of pins evaluated

Control Strategies for Improving Energy Efficiency and Reliability in Autonomous Microgrids with Communication Constraints

Directory of Open Access Journals (Sweden)

Francisco Martins Portelinha Júnior

2017-09-01

Full Text Available Microgrids are a feasible path to deploy smart grids, an intelligent and highly automated power system. Their operation demands a dedicated communication infrastructure to manage, control and monitor the intermittent sources of energy and loads. Therefore, smart devices will be connected to support the growth of grid smartness increasing the dependency on communication networks, which consumes a high amount of power. In an energy-limited scenario, one of the main issues is to enhance the power supply time. Therefore, this paper proposes a hybrid methodology for microgrid energy management, integrated with a communication infrastructure to improve and to optimize islanded microgrid operation at maximum energy efficiency. The hybrid methodology applies some control management rules, such as intentional load shedding, priority load management, and communication energy saving. These energy saving rules establish a trade-off between increasing microgrid energy availability and communication system reliability. To achieve a compromised solution, a continuous time Markov chain model describes the impact of energy saving policies into system reliability. The proposed methodology is simulated and tested with the help of the modified IEEE 34 node test-system.

76 FR 61355 - National Drinking Water Advisory Council; Request for Nominations

Science.gov (United States)

2011-10-04

... women and men of all racial and ethnic groups. All nominations will be fully considered, but applicants... government officials to determine whether there is a statutory conflict between that person's public...

Software reliability studies

Science.gov (United States)

Hoppa, Mary Ann; Wilson, Larry W.

1994-01-01

There are many software reliability models which try to predict future performance of software based on data generated by the debugging process. Our research has shown that by improving the quality of the data one can greatly improve the predictions. We are working on methodologies which control some of the randomness inherent in the standard data generation processes in order to improve the accuracy of predictions. Our contribution is twofold in that we describe an experimental methodology using a data structure called the debugging graph and apply this methodology to assess the robustness of existing models. The debugging graph is used to analyze the effects of various fault recovery orders on the predictive accuracy of several well-known software reliability algorithms. We found that, along a particular debugging path in the graph, the predictive performance of different models can vary greatly. Similarly, just because a model 'fits' a given path's data well does not guarantee that the model would perform well on a different path. Further we observed bug interactions and noted their potential effects on the predictive process. We saw that not only do different faults fail at different rates, but that those rates can be affected by the particular debugging stage at which the rates are evaluated. Based on our experiment, we conjecture that the accuracy of a reliability prediction is affected by the fault recovery order as well as by fault interaction.

Examining the reliability of ADAS-Cog change scores.

Science.gov (United States)

Grochowalski, Joseph H; Liu, Ying; Siedlecki, Karen L

2016-09-01

The purpose of this study was to estimate and examine ways to improve the reliability of change scores on the Alzheimer's Disease Assessment Scale, Cognitive Subtest (ADAS-Cog). The sample, provided by the Alzheimer's Disease Neuroimaging Initiative, included individuals with Alzheimer's disease (AD) (n = 153) and individuals with mild cognitive impairment (MCI) (n = 352). All participants were administered the ADAS-Cog at baseline and 1 year, and change scores were calculated as the difference in scores over the 1-year period. Three types of change score reliabilities were estimated using multivariate generalizability. Two methods to increase change score reliability were evaluated: reweighting the subtests of the scale and adding more subtests. Reliability of ADAS-Cog change scores over 1 year was low for both the AD sample (ranging from .53 to .64) and the MCI sample (.39 to .61). Reweighting the change scores from the AD sample improved reliability (.68 to .76), but lengthening provided no useful improvement for either sample. The MCI change scores had low reliability, even with reweighting and adding additional subtests. The ADAS-Cog scores had low reliability for measuring change. Researchers using the ADAS-Cog should estimate and report reliability for their use of the change scores. The ADAS-Cog change scores are not recommended for assessment of meaningful clinical change.

Projecting Grammatical Features in Nominals: Cognitive Processing Theory & Computational Implementation

Science.gov (United States)

2010-03-01

underlying linguistic theory is an adaptation of X-Bar Theory ( Chomsky , 1970; Jackendoff, 1977) called Bi- Polar Theory (Ball, 2007a). In Bi-Polar...University Press. Chomsky , N. (1970). Remarks on Nominalization. In Jacobs & Rosembaum, (Eds.), Readings in English Transformational Grammar. Waltham, MA

Expressed satisfaction with the nominal group technique among change agents

NARCIS (Netherlands)

Gresham, J.N.

1986-01-01

Expressed Satisfaction with the Nominal Group Technique Among Change Agents. Jon Neal Gresham The purpose of this study was to determine whether or not policymakers and change agents with differing professional backgrounds and responsibilities, who participated in the structured process of a

Relational vs. attributive interpretation of nominal compounds differentially engages angular gyrus and anterior temporal lobe.

Science.gov (United States)

Boylan, Christine; Trueswell, John C; Thompson-Schill, Sharon L

2017-06-01

The angular gyrus (AG) and anterior temporal lobe (ATL) have been found to respond to a number of tasks involving combinatorial processing. In this study, we investigate the conceptual combination of nominal compounds, and ask whether ATL/AG activity is modulated by the type of combinatorial operation applied to a nominal compound. We compare relational and attributive interpretations of nominal compounds and find that ATL and AG both discriminate these two types, but in distinct ways. While right AG demonstrated greater positive task-responsive activity for relational compounds, there was a greater negative deflection in the BOLD response in left AG for relational compounds. In left ATL, we found an earlier peak in subjects' BOLD response curves for attributive interpretations. In other words, we observed dissociations in both AG and ATL between relational and attributive nominal compounds, with regard to magnitude in the former and to timing in the latter. These findings expand on prior studies that posit roles for both AG and ATL in conceptual processing generally, and in conceptual combination specifically, by indicating possible functional specializations of these two regions within a larger conceptual knowledge network. Copyright © 2017 Elsevier Inc. All rights reserved.

Equipment Reliability Program in NPP Krsko

International Nuclear Information System (INIS)

Skaler, F.; Djetelic, N.

2006-01-01

Operation that is safe, reliable, effective and acceptable to public is the common message in a mission statement of commercial nuclear power plants (NPPs). To fulfill these goals, nuclear industry, among other areas, has to focus on: 1 Human Performance (HU) and 2 Equipment Reliability (EQ). The performance objective of HU is as follows: The behaviors of all personnel result in safe and reliable station operation. While unwanted human behaviors in operations mostly result directly in the event, the behavior flaws either in the area of maintenance or engineering usually cause decreased equipment reliability. Unsatisfied Human performance leads even the best designed power plants into significant operating events, which can be found as well-known examples in nuclear industry. Equipment reliability is today recognized as the key to success. While the human performance at most NPPs has been improving since the start of WANO / INPO / IAEA evaluations, the open energy market has forced the nuclear plants to reduce production costs and operate more reliably and effectively. The balance between these two (opposite) goals has made equipment reliability even more important for safe, reliable and efficient production. Insisting on on-line operation by ignoring some principles of safety could nowadays in a well-developed safety culture and human performance environment exceed the cost of electricity losses. In last decade the leading USA nuclear companies put a lot of effort to improve equipment reliability primarily based on INPO Equipment Reliability Program AP-913 at their NPP stations. The Equipment Reliability Program is the key program not only for safe and reliable operation, but also for the Life Cycle Management and Aging Management on the way to the nuclear power plant life extension. The purpose of Equipment Reliability process is to identify, organize, integrate and coordinate equipment reliability activities (preventive and predictive maintenance, maintenance

Aerospace reliability applied to biomedicine.

Science.gov (United States)

Lalli, V. R.; Vargo, D. J.

1972-01-01

An analysis is presented that indicates that the reliability and quality assurance methodology selected by NASA to minimize failures in aerospace equipment can be applied directly to biomedical devices to improve hospital equipment reliability. The Space Electric Rocket Test project is used as an example of NASA application of reliability and quality assurance (R&QA) methods. By analogy a comparison is made to show how these same methods can be used in the development of transducers, instrumentation, and complex systems for use in medicine.

A reliability analysis tool for SpaceWire network

Science.gov (United States)

Zhou, Qiang; Zhu, Longjiang; Fei, Haidong; Wang, Xingyou

2017-04-01

A SpaceWire is a standard for on-board satellite networks as the basis for future data-handling architectures. It is becoming more and more popular in space applications due to its technical advantages, including reliability, low power and fault protection, etc. High reliability is the vital issue for spacecraft. Therefore, it is very important to analyze and improve the reliability performance of the SpaceWire network. This paper deals with the problem of reliability modeling and analysis with SpaceWire network. According to the function division of distributed network, a reliability analysis method based on a task is proposed, the reliability analysis of every task can lead to the system reliability matrix, the reliability result of the network system can be deduced by integrating these entire reliability indexes in the matrix. With the method, we develop a reliability analysis tool for SpaceWire Network based on VC, where the computation schemes for reliability matrix and the multi-path-task reliability are also implemented. By using this tool, we analyze several cases on typical architectures. And the analytic results indicate that redundancy architecture has better reliability performance than basic one. In practical, the dual redundancy scheme has been adopted for some key unit, to improve the reliability index of the system or task. Finally, this reliability analysis tool will has a directive influence on both task division and topology selection in the phase of SpaceWire network system design.

Problem of nuclear power plant reliability

International Nuclear Information System (INIS)

Popyrin, L.S.; Nefedov, Yu.V.

1989-01-01

The problem of substantiation of rational and methods of ensurance of NPP reliability at the stage of its designing has been studied. It is shown that the optimal level of NPP reliability is determined by coordinating solution of the proiblems for optimization of reliability of power industry, heat and power supply and nuclear power generation systems comprising NPP, and problems of reliability optimization of NPP proper, as a complex engineering system. The conclusion is made that the greatest attention should be paid to the development of mathematical models of reliability, taking into account different methods of equipment redundancy, as well as dependence of failures on barious factors, improvement of NPP reliability indices, development of data base, working out of the complec of consistent standards of reliability. 230 refs.; 2 figs.; 1 tab

Improvement in reliability and accuracy of heater tube eddy current testing by integration with an appropriate destructive test

International Nuclear Information System (INIS)

Giovanelli, F.; Gabiccini, S.; Tarli, R.; Motta, P.

1988-01-01

A specially developed destructive test is described showing how the reliability and accuracy of a non-destructive technique can be improved if it is suitably accompanied by an appropriate destructive test. The experiment was carried out on samples of AISI 304L tubes from the low-pressure (LP) preheaters of a BWR 900 MW nuclear plant. (author)

The Americleft Speech Project: A Training and Reliability Study.

Science.gov (United States)

Chapman, Kathy L; Baylis, Adriane; Trost-Cardamone, Judith; Cordero, Kelly Nett; Dixon, Angela; Dobbelsteyn, Cindy; Thurmes, Anna; Wilson, Kristina; Harding-Bell, Anne; Sweeney, Triona; Stoddard, Gregory; Sell, Debbie

2016-01-01

To describe the results of two reliability studies and to assess the effect of training on interrater reliability scores. The first study (1) examined interrater and intrarater reliability scores (weighted and unweighted kappas) and (2) compared interrater reliability scores before and after training on the use of the Cleft Audit Protocol for Speech-Augmented (CAPS-A) with British English-speaking children. The second study examined interrater and intrarater reliability on a modified version of the CAPS-A (CAPS-A Americleft Modification) with American and Canadian English-speaking children. Finally, comparisons were made between the interrater and intrarater reliability scores obtained for Study 1 and Study 2. The participants were speech-language pathologists from the Americleft Speech Project. In Study 1, interrater reliability scores improved for 6 of the 13 parameters following training on the CAPS-A protocol. Comparison of the reliability results for the two studies indicated lower scores for Study 2 compared with Study 1. However, this appeared to be an artifact of the kappa statistic that occurred due to insufficient variability in the reliability samples for Study 2. When percent agreement scores were also calculated, the ratings appeared similar across Study 1 and Study 2. The findings of this study suggested that improvements in interrater reliability could be obtained following a program of systematic training. However, improvements were not uniform across all parameters. Acceptable levels of reliability were achieved for those parameters most important for evaluation of velopharyngeal function.

Improved Reliability of Small Molecule Organic Solar Cells by Double Anode Buffer Layers

Directory of Open Access Journals (Sweden)

Pao-Hsun Huang

2014-01-01

Full Text Available An optimized hybrid planar heterojunction (PHJ of small molecule organic solar cells (SM-OSCs based on copper phthalocyanine (CuPc as donor and fullerene (C60 as acceptor was fabricated, which obviously enhanced the performance of device by sequentially using both MoO3 and pentacene as double anode buffer layers (ABL, also known as hole extraction layer (HEL. A series of the vacuum-deposited ABL, acting as an electron and exciton blocking layer, were examined for their characteristics in SM-OSCs. The performance and reliability were compared between conventional ITO/ABL/CuPc/C60/BCP/Ag cells and the new ITO/double ABL/CuPc/C60/BCP/Ag cells. The effect on the electrical properties of these materials was also investigated to obtain the optimal thickness of ABL. The comparison shows that the modified cell has an enhanced reliability compared to traditional cells. The improvement of lifetime was attributed to the idea of double layers to prevent humidity and oxygen from diffusing into the active layer. We demonstrated that the interfacial extraction layers are necessary to avoid degradation of device. That is to say, in normal temperature and pressure, a new avenue for the device within double buffer layers has exhibited the highest values of open circuit voltage (Voc, fill factor (FF, and lifetime in this work compared to monolayer of ABL.

Application of reliability methods in Ontario Hydro

International Nuclear Information System (INIS)

Jeppesen, R.; Ravishankar, T.J.

1985-01-01

Ontario Hydro have established a reliability program in support of its substantial nuclear program. Application of the reliability program to achieve both production and safety goals is described. The value of such a reliability program is evident in the record of Ontario Hydro's operating nuclear stations. The factors which have contributed to the success of the reliability program are identified as line management's commitment to reliability; selective and judicious application of reliability methods; establishing performance goals and monitoring the in-service performance; and collection, distribution, review and utilization of performance information to facilitate cost-effective achievement of goals and improvements. (orig.)

Systems reliability analysis: applications of the SPARCS System-Reliability Assessment Computer Program

International Nuclear Information System (INIS)

Locks, M.O.

1978-01-01

SPARCS-2 (Simulation Program for Assessing the Reliabilities of Complex Systems, Version 2) is a PL/1 computer program for assessing (establishing interval estimates for) the reliability and the MTBF of a large and complex s-coherent system of any modular configuration. The system can consist of a complex logical assembly of independently failing attribute (binomial-Bernoulli) and time-to-failure (Poisson-exponential) components, without regard to their placement. Alternatively, it can be a configuration of independently failing modules, where each module has either or both attribute and time-to-failure components. SPARCS-2 also has an improved super modularity feature. Modules with minimal-cut unreliabiliy calculations can be mixed with those having minimal-path reliability calculations. All output has been standardized to system reliability or probability of success, regardless of the form in which the input data is presented, and whatever the configuration of modules or elements within modules

Photovoltaic Module Reliability Workshop 2012: February 28 - March 1, 2012

Energy Technology Data Exchange (ETDEWEB)

Kurtz, S.

2013-11-01

NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

Reliability analysis of stiff versus flexible piping

International Nuclear Information System (INIS)

Lu, S.C.

1985-01-01

The overall objective of this research project is to develop a technical basis for flexible piping designs which will improve piping reliability and minimize the use of pipe supports, snubbers, and pipe whip restraints. The current study was conducted to establish the necessary groundwork based on the piping reliability analysis. A confirmatory piping reliability assessment indicated that removing rigid supports and snubbers tends to either improve or affect very little the piping reliability. The authors then investigated a couple of changes to be implemented in Regulatory Guide (RG) 1.61 and RG 1.122 aimed at more flexible piping design. They concluded that these changes substantially reduce calculated piping responses and allow piping redesigns with significant reduction in number of supports and snubbers without violating ASME code requirements. Furthermore, the more flexible piping redesigns are capable of exhibiting reliability levels equal to or higher than the original stiffer design. An investigation of the malfunction of pipe whip restraints confirmed that the malfunction introduced higher thermal stresses and tended to reduce the overall piping reliability. Finally, support and component reliabilities were evaluated based on available fragility data. Results indicated that the support reliability usually exhibits a moderate decrease as the piping flexibility increases. Most on-line pumps and valves showed an insignificant reduction in reliability for a more flexible piping design

77 FR 70182 - Reopening of Nomination Period for Members of the Advisory Committee on Climate Change and...

Science.gov (United States)

2012-11-23

... Nomination Period for Members of the Advisory Committee on Climate Change and Natural Resource Science AGENCY... published a notice announcing the establishment of the Advisory Committee on Climate Change and Natural.... ADDRESSES: Send nominations to: Robin O'Malley, Policy and Partnership Coordinator, National Climate Change...

Small Aircraft Transportation System, Higher Volume Operations Concept: Off-Nominal Operations

Science.gov (United States)

Abbott, Terence S.; Consiglio, Maria C.; Baxley, Brian T.; Williams, Daniel M.; Conway, Sheila R.

2005-01-01

This document expands the Small Aircraft Transportation System, (SATS) Higher Volume Operations (HVO) concept to include off-nominal conditions. The general philosophy underlying the HVO concept is the establishment of a newly defined area of flight operations called a Self-Controlled Area (SCA). During periods of poor weather, a block of airspace would be established around designated non-towered, non-radar airports. Aircraft flying enroute to a SATS airport would be on a standard instrument flight rules flight clearance with Air Traffic Control providing separation services. Within the SCA, pilots would take responsibility for separation assurance between their aircraft and other similarly equipped aircraft. Previous work developed the procedures for normal HVO operations. This document provides details for off-nominal and emergency procedures for situations that could be expected to occur in a future SCA.

Software engineering practices for control system reliability

International Nuclear Information System (INIS)

S. K. Schaffner; K. S White

1999-01-01

This paper will discuss software engineering practices used to improve Control System reliability. The authors begin with a brief discussion of the Software Engineering Institute's Capability Maturity Model (CMM) which is a framework for evaluating and improving key practices used to enhance software development and maintenance capabilities. The software engineering processes developed and used by the Controls Group at the Thomas Jefferson National Accelerator Facility (Jefferson Lab), using the Experimental Physics and Industrial Control System (EPICS) for accelerator control, are described. Examples are given of how their procedures have been used to minimized control system downtime and improve reliability. While their examples are primarily drawn from their experience with EPICS, these practices are equally applicable to any control system. Specific issues addressed include resource allocation, developing reliable software lifecycle processes and risk management

Prevalence of E/A wave fusion and A wave truncation in DDD pacemaker patients with complete AV block under nominal AV intervals.

Directory of Open Access Journals (Sweden)

Wolfram C Poller

Full Text Available Optimization of the AV-interval (AVI in DDD pacemakers improves cardiac hemodynamics and reduces pacemaker syndromes. Manual optimization is typically not performed in clinical routine. In the present study we analyze the prevalence of E/A wave fusion and A wave truncation under resting conditions in 160 patients with complete AV block (AVB under the pre-programmed AVI. We manually optimized sub-optimal AVI.We analyzed 160 pacemaker patients with complete AVB, both in sinus rhythm (AV-sense; n = 129 and under atrial pacing (AV-pace; n = 31. Using Doppler analyses of the transmitral inflow we classified the nominal AVI as: a normal, b too long (E/A wave fusion or c too short (A wave truncation. In patients with a sub-optimal AVI, we performed manual optimization according to the recommendations of the American Society of Echocardiography.All AVB patients with atrial pacing exhibited a normal transmitral inflow under the nominal AV-pace intervals (100%. In contrast, 25 AVB patients in sinus rhythm showed E/A wave fusion under the pre-programmed AV-sense intervals (19.4%; 95% confidence interval (CI: 12.6-26.2%. A wave truncations were not observed in any patient. All patients with a complete E/A wave fusion achieved a normal transmitral inflow after AV-sense interval reduction (mean optimized AVI: 79.4 ± 13.6 ms.Given the rate of 19.4% (CI 12.6-26.2% of patients with a too long nominal AV-sense interval, automatic algorithms may prove useful in improving cardiac hemodynamics, especially in the subgroup of atrially triggered pacemaker patients with AV node diseases.

Reliability improvement of PMZNT relaxor ferroelectrics through surface modification by MnO2 doping against electroplating-induced degradation

International Nuclear Information System (INIS)

Cao Jiangli; Li Longtu; Gui Zhilun

2003-01-01

Electroplating treatment, scanning electron microscopy (SEM) observation, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) analyses were conducted to investigate the reliability improvement of lead magnesium niobate-based ceramics (PMZNT) through MnO 2 vaporous doping against hydrogen reduction during electroplating. The results showed that manganese dopant was reduced to be +3 oxidation state during the sintering and Mn 3+ was incorporated into the perovskite lattice; however, only the outermost ceramics surface was doped while 50 μm beneath kept unchanged. This technique proved to enhance the reliability of PMZNT against electroplating significantly without changing the dielectric properties of ceramics body. Based on the above results, the modification mechanism of MnO 2 vaporous doping was analyzed from the viewpoint of defect chemistry

Managing the effects of aging and reliability improvement

International Nuclear Information System (INIS)

Hall, R.E.; Taylor, J.H.; Boccio, J.L.

1987-01-01

Over recent years the electric power generating community has acknowledged the importance of the aging process on plant safety and availability. To cope with time-dependent degradation phenomenon that can affect active as well as passive components and lead to unacceptable, unanticipated failures requires research into the mechanisms of the aging process, advances in productive methods for assessing the aging impact on risk and availability, and a better understanding of power plant operations so that strategies for defending against this pervasive stress can be developed. This paper discusses current research advances and presents a framework to aid in the systematic integration of these three needs. As such it is anchored to research being conducted at Brookhaven National Laboratory in the areas of plant aging, life extension, reliability, performance indication, and risk assessment. The current question facing the industry can be simply stated. ''How can an acceptable level of safety and availability be maintained throughout the operational life of a nuclear power plant?'' The complexity of this question indicates that managing aging effects must be a continuous, coordinated process integrated with day-to-day tactical plant operation decisions. This implies that aging and reliability programs must be systemic properties of an organization's management, and that research into aging technology must be closely linked

Nondestructive examination (NDE) Reliability for Inservice Inspection of Light Water Reactors

International Nuclear Information System (INIS)

Doctor, S.R.; Good, M.S.; Heasler, P.G.; Hockey, R.L.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.; Vo, T.V.

1992-07-01

The Evaluation and Improvement of NDE reliability for Inservice Inspection of Light Water Reactors (NDE Reliability) Program at the Pacific Northwest Laboratory was established by the Nuclear Regulatory Commission to determine the reliability of current inservice inspection (ISI) techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this program include determining the reliability of ISI performed on the primary systems of commercial light-water reactors (LWRs); using probabilistic fracture mechanics analysis to determine the impact of NDE unreliability on system safety; and evaluating reliability improvements that can be achieved with improved and advanced technology. A final objective is to formulate recommended revisions to the Regulatory and ASME Code requirements, based on material properties, service conditions, and NDE uncertainties

Enhance pump reliability through improved inservice testing

International Nuclear Information System (INIS)

Healy, J.J.

1990-01-01

EPRI has undertaken a study to assess the effectiveness of existing testing programs to accurately monitor and predict performance changes before either pump performance degrades or an actual failure occurs. Anticipated changes in inservice testing techniques are directed towards enhancing the validity of test data, ensuring its repeatability, and avoiding deterioration of the pump assembly. There is a new-found interest in test programs of all types that has occurred, in part, because of an increase in reported pump degradation and pump failure. Inservice testing of pumps, which has long been a basis for assuring operability, has apparently produced an opposite effect; namely, the appearance of a reduction in reliability

Reliability of Wireless Sensor Networks

Science.gov (United States)

Dâmaso, Antônio; Rosa, Nelson; Maciel, Paulo

2014-01-01

Wireless Sensor Networks (WSNs) consist of hundreds or thousands of sensor nodes with limited processing, storage, and battery capabilities. There are several strategies to reduce the power consumption of WSN nodes (by increasing the network lifetime) and increase the reliability of the network (by improving the WSN Quality of Service). However, there is an inherent conflict between power consumption and reliability: an increase in reliability usually leads to an increase in power consumption. For example, routing algorithms can send the same packet though different paths (multipath strategy), which it is important for reliability, but they significantly increase the WSN power consumption. In this context, this paper proposes a model for evaluating the reliability of WSNs considering the battery level as a key factor. Moreover, this model is based on routing algorithms used by WSNs. In order to evaluate the proposed models, three scenarios were considered to show the impact of the power consumption on the reliability of WSNs. PMID:25157553

An integrated reliability management system for nuclear power plants

International Nuclear Information System (INIS)

Kimura, T.; Shimokawa, H.; Matsushima, H.

1998-01-01

The responsibility in the nuclear field of the Government, utilities and manufactures has increased in the past years due to the need of stable operation and great reliability of nuclear power plants. The need to improve the reliability is not only for the new plants but also for those now running. So, several measures have been taken to improve reliability. In particular, the plant manufactures have developed a reliability management system for each phase (planning, construction, maintenance and operation) and these have been integrated as a unified system. This integrated reliability management system for nuclear power plants contains information about plant performance, failures and incidents which have occurred in the plants. (author)

75 FR 27554 - Science Advisory Board Staff Office; Request for Nominations of Experts for the SAB Arsenic...

Science.gov (United States)

2010-05-17

... obtain nominations of diverse candidates, EPA encourages nominations of women and men of all racial and...) absence of financial conflicts of interest; (d) absence of an appearance of a lack of impartiality; (e... financial conflicts of interest will include a review of the ``Confidential Financial Disclosure Form for...

Enflasyon ve Nominal Faiz Oranı İlişkisi: Türkiye Örneği (2004-2013 ( Relationship Between The Inflation And Nominal Interest Rate: The Case Of Turkey (2004-2013

Directory of Open Access Journals (Sweden)

Musa ATGÜR

2015-12-01

Full Text Available This paper examines the relationship between the inflation and interest rate in Turkey for the period 2004-2013. The results obtained in this study have pointed to the existence of Fisher Effect in Turkey during the period 2004-2013. According to the Johansen, Lütkepohl-Saikkonen Cointegration Tests and Dynamic Least Squares (DOLSmethod the results applied in the study, a long-run relationship has been found between the inflation(ENF and nominal interest rate (NFO variables. In this context, the developments is related to each other about the inflation and nominal interest rates in Turkey for during the period 2004-2013. Therefore, the Central Bank of the Republic of Turkey should conduct to implement monetary policy taking into account the long-run relation for the next period. Bu çalışmada, Türkiye'de enflasyon ve nominal faiz oranı ilişkisi, 2004-2013 dönemi için incelenmiştir. Çalışmada elde edilen sonuçlar, 2004-2013 döneminde Türkiye'de Fisher Etkisinin varlığına işaret etmiştir. Çalışmada uygulanan Johansen, Lütkepohl-Saikkonen Eşbütünleşme Testleri ve Dinamik En Küçük Kareler (DOLS Yöntemi sonuçlarına göre, enflasyon (ENF ve nominal faiz oranı (NFO değişkenleri arasında uzun dönemli bir ilişki bulunmuştur. Bu kapsamda 2004-2013 döneminde Türkiye'de enflasyon ve nominal faiz oranındaki gelişmeler birbiri ile yakından ilgilidir. Bu sebeple, Türkiye Cumhuriyet Merkez Bankasının önümüzdeki dönemde de uygulayacağı para politikalarını bu uzun dönemli ilişkiyi dikkate alarak yürütmesi önem arzetmektedir.

Reliability in individual monitoring service.

Science.gov (United States)

Mod Ali, N

2011-03-01

As a laboratory certified to ISO 9001:2008 and accredited to ISO/IEC 17025, the Secondary Standard Dosimetry Laboratory (SSDL)-Nuclear Malaysia has incorporated an overall comprehensive system for technical and quality management in promoting a reliable individual monitoring service (IMS). Faster identification and resolution of issues regarding dosemeter preparation and issuing of reports, personnel enhancement, improved customer satisfaction and overall efficiency of laboratory activities are all results of the implementation of an effective quality system. Review of these measures and responses to observed trends provide continuous improvement of the system. By having these mechanisms, reliability of the IMS can be assured in the promotion of safe behaviour at all levels of the workforce utilising ionising radiation facilities. Upgradation of in the reporting program through a web-based e-SSDL marks a major improvement in Nuclear Malaysia's IMS reliability on the whole. The system is a vital step in providing a user friendly and effective occupational exposure evaluation program in the country. It provides a higher level of confidence in the results generated for occupational dose monitoring of the IMS, thus, enhances the status of the radiation protection framework of the country.

AN EMPIRICAL STUDY OF THE FISHER EFFECT AND THE DYNAMIC RELATION BETWEEN NOMINAL INTEREST RATE AND INFLATION IN SINGAPORE

OpenAIRE

KING FUEI LEE

2009-01-01

The Fisher effect postulated that real interest rate is constant, and that nominal interest rate and expected inflation move one-for-one together. This paper employs Johansen’s method to investigate for the existence of a long-run Fisher effect in the Singapore economy over the period 1976 to 2006, and finds evidence of a positive relationship between nominal interest rate and inflation rate while rejecting the notion of a full Fisher Effect. The dynamic relationship between nominal interest ...

Accelerator Availability and Reliability Issues

Energy Technology Data Exchange (ETDEWEB)

Steve Suhring

2003-05-01

Maintaining reliable machine operations for existing machines as well as planning for future machines' operability present significant challenges to those responsible for system performance and improvement. Changes to machine requirements and beam specifications often reduce overall machine availability in an effort to meet user needs. Accelerator reliability issues from around the world will be presented, followed by a discussion of the major factors influencing machine availability.

75 FR 8043 - National Medal of Technology and Innovation Nomination Evaluation Committee

Science.gov (United States)

2010-02-23

... balance, the Department is seeking additional nominations of candidates from small, medium-sized, and large businesses or with special expertise in the following sub-sectors of the technology enterprise...

Improving Reliability of Embedded Systems through Dynamic Memory Manager Optimization using Grammatical Evolution

OpenAIRE

Colmenar, J. Manuel; Risco-Martin, Jose L.; Atienza Alonso, David; Garnica, Oscar; Hidalgo, Jose I.; Lanchares, Juan

2010-01-01

Technology scaling has offered advantages to embedded systems, such as increased performance, more available memory and reduced energy consumption. However, scaling also brings a number of problems like reliability degradation mechanisms. The intensive activity of devices and high operating temperatures are key factors for reliability degradation in latest technology nodes. Focusing on embedded systems, the memory is prone to suffer reliability problems due to the intensive use of dynamic mem...

Reliable design of electronic equipment an engineering guide

CERN Document Server

Natarajan, Dhanasekharan

2014-01-01

This book explains reliability techniques with examples from electronics design for the benefit of engineers. It presents the application of de-rating, FMEA, overstress analyses and reliability improvement tests for designing reliable electronic equipment. Adequate information is provided for designing computerized reliability database system to support the application of the techniques by designers. Pedantic terms and the associated mathematics of reliability engineering discipline are excluded for the benefit of comprehensiveness and practical applications. This book offers excellent support

75 FR 72664 - System Personnel Training Reliability Standards

Science.gov (United States)

2010-11-26

...--Staffing). \\2\\ Mandatory Reliability Standards for the Bulk-Power System, Order No. 693, 72 FR 16416 (Apr... on the North American bulk electric system are competent to perform those reliability-related tasks... PER-004-2 will achieve a significant improvement in the reliability of the Bulk- Power System and...

77 FR 19646 - International Whaling Commission; 64th Annual Meeting; Nominations

Science.gov (United States)

2012-04-02

... Commissioner representing the positions of non-governmental organizations. Generally, only one non-governmental... the U.S. IWC Commissioner representing the positions of non-governmental organizations. Generally... International Whaling Commission; 64th Annual Meeting; Nominations AGENCY: National Marine Fisheries Service...

Composition of a Vision Screen for Servicemembers With Traumatic Brain Injury: Consensus Using a Modified Nominal Group Technique

Science.gov (United States)

Finkelstein, Marsha; Llanos, Imelda; Scheiman, Mitchell; Wagener, Sharon Gowdy

2014-01-01

Vision impairment is common in the first year after traumatic brain injury (TBI), including among service members whose brain injuries occurred during deployment in Iraq and Afghanistan. Occupational therapy practitioners provide routine vision screening to inform treatment planning and referral to vision specialists, but existing methods are lacking because many tests were developed for children and do not screen for vision dysfunction typical of TBI. An expert panel was charged with specifying the composition of a vision screening protocol for servicemembers with TBI. A modified nominal group technique fostered discussion and objective determinations of consensus. After considering 29 vision tests, the panel recommended a nine-test vision screening that examines functional performance, self-reported problems, far–near acuity, reading, accommodation, convergence, eye alignment and binocular vision, saccades, pursuits, and visual fields. Research is needed to develop reliable, valid, and clinically feasible vision screening protocols to identify TBI-related vision disorders in adults. PMID:25005505

Standards in reliability and safety engineering

International Nuclear Information System (INIS)

O'Connor, Patrick

1998-01-01

This article explains how the highest 'world class' levels of reliability and safety are achieved, by adherence to the basic principles of excellence in design, production, support and maintenance, by continuous improvement, and by understanding that excellence and improvement lead to reduced costs. These principles are contrasted with the methods that have been developed and standardised, particularly military standards for reliability, ISO9000, and safety case regulations. The article concludes that the formal, standardised approaches are misleading and counterproductive, and recommends that they be replaced by a philosophy based on the realities of human performance

Reliability engineering theory and practice

CERN Document Server

Birolini, Alessandro

2017-01-01

This book shows how to build in and assess reliability, availability, maintainability, and safety (RAMS) of components, equipment, and systems. It presents the state of the art of reliability (RAMS) engineering, in theory & practice, and is based on over 30 years author's experience in this field, half in industry and half as Professor of Reliability Engineering at the ETH, Zurich. The book structure allows rapid access to practical results. Methods & tools are given in a way that they can be tailored to cover different RAMS requirement levels. Thanks to Appendices A6 - A8 the book is mathematically self-contained, and can be used as a textbook or as a desktop reference with a large number of tables (60), figures (210), and examples / exercises^ 10,000 per year since 2013) were the motivation for this final edition, the 13th since 1985, including German editions. Extended and carefully reviewed to improve accuracy, it represents the continuous improvement effort to satisfy reader's needs and confidenc...

Cycle chemistry monitoring system as means of improving the reliability of the equipment at the power plants

Science.gov (United States)

Yegoshina, O. V.; Voronov, V. N.; Yarovoy, V. O.; Bolshakova, N. A.

2017-11-01

There are many problems in domestic energy at the present that require urgent solutions in the near future. One of these problems - the aging of the main and auxiliary equipment. Wear of equipment is the cause of decrease reliability and efficiency of power plants. Reliability of the equipment are associated with the introduction of cycle chemistry monitoring system. The most damageable equipment’s are boilers (52.2 %), turbines (12.6 %) and heating systems (12.3 %) according to the review of failure rate on the power plants. The most part of the damageability of the boiler is heated surfaces (73.2 %). According to the Russian technical requirements, the monitoring systems are responsible to reduce damageability the boiler heating surfaces and to increase the reliability of the equipment. All power units capacity of over 50 MW are equipped with cycle chemistry monitoring systems in order to maintain water chemistry within operating limits. The main idea of cycle chemistry monitoring systems is to improve water chemistry at power plants. According to the guidelines, cycle chemistry monitoring systems of a single unit depends on its type (drum or once-through boiler) and consists of: 20…50 parameters of on-line chemical analyzers; 20…30 «grab» sample analyses (daily) and about 15…20 on-line monitored operating parameters. The operator of modern power plant uses with many data at different points of steam/water cycle. Operators do not can estimate quality of the cycle chemistry due to the large volume of daily and every shift information and dispersion of data, lack of systematization. In this paper, an algorithm for calculating the quality index developed for improving control the water chemistry of the condensate, feed water and prevent scaling and corrosion in the steam/water cycle.

Grammatical Conception of Yuriy Shevel'ov: Nominative ↔ Vocative in the System of Substantial Categoriality

Directory of Open Access Journals (Sweden)

Anatoliy Zahnitko

2016-08-01

Full Text Available Background. Analysis of Yuriy Shevel'ov’s approaches to the interpretation of the morphological tier of language, as well as his examination of particular phenomena of this level – substantiality, verbality, and others – reflects not only the author's understanding itself of all the grammatical system as a whole, and morphological one in particular, but also represents the features of modification of scientific approaches in the history of linguistic thought of mid-twentieth century, its strengthening in the studies of the XX – XXI century. The researcher’s definition of nominative and vocative cases as interrelated within the categorical substantiality is of particular importance. Purpose: to determine the main components of interpretation of the status dimension of the nominative and vocative cases within morpho-substantial categoriality of Yuriy Shevel'ov with the definition of theoretical foundations and practical principles, revealing the patterns of establishing internal sentence dimension of the nominative and vocative cases. Results: In the case theory with reliance on the sequence of forms of dependencies in the internal sentence space Yuriy Shevel'ov distinguishes five cases: genitive, dative, accusative, ablative, locative. In the statement about the nominative as grammatically independent case the scientist relies on sentence. Two-dimensionality of grammatically independent case opposes to the one-dimensional grammatically dependent nominative that is traceable in syntactic positions of predicate and apposition. Yuriy Shevel'ov did not consider addressing that is not grammatically linked to the sentence with a specific expression as an individual case. The forms of vocative case show functional three-componentity, because in its functional-semantic paradigm it covers the function of the addressee – potential subject of action (primary function that is represented in formal grammar sentence structure by the main element of

Tree-based server-middleman-client architecture: improving scalability and reliability for voting-based network games in ad hoc wireless networks

Science.gov (United States)

Guo, Y.; Fujinoki, H.

2006-10-01

The concept of a new tree-based architecture for networked multi-player games was proposed by Matuszek to improve scalability in network traffic at the same time to improve reliability. The architecture (we refer it as "Tree-Based Server- Middlemen-Client architecture") will solve the two major problems in ad-hoc wireless networks: frequent link failures and significance in battery power consumption at wireless transceivers by using two new techniques, recursive aggregation of client messages and subscription-based propagation of game state. However, the performance of the TBSMC architecture has never been quantitatively studied. In this paper, the TB-SMC architecture is compared with the client-server architecture using simulation experiments. We developed an event driven simulator to evaluate the performance of the TB-SMC architecture. In the network traffic scalability experiments, the TB-SMC architecture resulted in less than 1/14 of the network traffic load for 200 end users. In the reliability experiments, the TB-SMC architecture improved the number of successfully delivered players' votes by 31.6, 19.0, and 12.4% from the clientserver architecture at high (failure probability of 90%), moderate (50%) and low (10%) failure probability.

Diversity combining in laser Doppler vibrometry for improved signal reliability

International Nuclear Information System (INIS)

Dräbenstedt, Alexander

2014-01-01

Because of the speckle nature of the light reflected from rough surfaces the signal quality of a vibrometer suffers from varying signal power. Deep signal outages manifest themselves as noise bursts and spikes in the demodulated velocity signal. Here we show that the signal quality of a single point vibrometer can be substantially improved by diversity reception. This concept is widely used in RF communication and can be transferred into optical interferometry. When two statistically independent measurement channels are available which measure the same motion on the same spot, the probability for both channels to see a signal drop-out at the same time is very low. We built a prototype instrument that uses polarization diversity to constitute two independent reception channels that are separately demodulated into velocity signals. Send and receive beams go through different parts of the aperture so that the beams can be spatially separated. The two velocity channels are mixed into one more reliable signal by a PC program in real time with the help of the signal power information. An algorithm has been developed that ensures a mixing of two or more channels with minimum resulting variance. The combination algorithm delivers also an equivalent signal power for the combined signal. The combined signal lacks the vast majority of spikes that are present in the raw signals and it extracts the true vibration information present in both channels. A statistical analysis shows that the probability for deep signal outages is largely decreased. A 60 fold improvement can be shown. The reduction of spikes and noise bursts reduces the noise in the spectral analysis of vibrations too. Over certain frequency bands a reduction of the noise density by a factor above 10 can be shown

Achieving High Reliability with People, Processes, and Technology.

Science.gov (United States)

Saunders, Candice L; Brennan, John A

2017-01-01

High reliability as a corporate value in healthcare can be achieved by meeting the "Quadruple Aim" of improving population health, reducing per capita costs, enhancing the patient experience, and improving provider wellness. This drive starts with the board of trustees, CEO, and other senior leaders who ingrain high reliability throughout the organization. At WellStar Health System, the board developed an ambitious goal to become a top-decile health system in safety and quality metrics. To achieve this goal, WellStar has embarked on a journey toward high reliability and has committed to Lean management practices consistent with the Institute for Healthcare Improvement's definition of a high-reliability organization (HRO): one that is committed to the prevention of failure, early identification and mitigation of failure, and redesign of processes based on identifiable failures. In the end, a successful HRO can provide safe, effective, patient- and family-centered, timely, efficient, and equitable care through a convergence of people, processes, and technology.

76 FR 34209 - International Whaling Commission; 63rd Annual Meeting; Nominations

Science.gov (United States)

2011-06-13

... Commissioner representing the positions of non-governmental organizations. Generally, only one non-governmental... recommendations to the U.S. IWC Commissioner representing the positions of non-governmental organizations... International Whaling Commission; 63rd Annual Meeting; Nominations AGENCY: National Marine Fisheries Service...

77 FR 6559 - Mobile Sources Technical Review Subcommittee; Request for Nominations

Science.gov (United States)

2012-02-08

... transportation policies, onboard diagnostics, heavy- duty engines, diesel retrofit, fuel quality and greenhouse... associated with official government business. EPA is seeking nominations from representatives of nonfederal... community groups; Experience working with supply chain logistics and goods movement; Experience in working...

Optimization of Reliability Centered Maintenance Bassed on Maintenance Costs and Reliability with Consideration of Location of Components

Directory of Open Access Journals (Sweden)

Mahdi Karbasian

2011-03-01

Full Text Available The reliability of designing systems such as electrical and electronic circuits, power generation/ distribution networks and mechanical systems, in which the failure of a component may cause the whole system failure, and even the reliability of cellular manufacturing systems that their machines are connected to as series are critically important. So far approaches for improving the reliability of these systems have been mainly based on the enhancement of inherent reliability of any system component or increasing system reliability based on maintenance strategies. Also in some of the resources, only the influence of the location of systems' components on reliability is studied. Therefore, it seems other approaches have been rarely applied. In this paper, a multi criteria model has been proposed to perform a balance among a system's reliability, location costs, and its system maintenance. Finally, a numerical example has been presented and solved by the Lingo software.

MEASUREMENT: ACCOUNTING FOR RELIABILITY IN PERFORMANCE ESTIMATES.

Science.gov (United States)

Waterman, Brian; Sutter, Robert; Burroughs, Thomas; Dunagan, W Claiborne

2014-01-01

When evaluating physician performance measures, physician leaders are faced with the quandary of determining whether departures from expected physician performance measurements represent a true signal or random error. This uncertainty impedes the physician leader's ability and confidence to take appropriate performance improvement actions based on physician performance measurements. Incorporating reliability adjustment into physician performance measurement is a valuable way of reducing the impact of random error in the measurements, such as those caused by small sample sizes. Consequently, the physician executive has more confidence that the results represent true performance and is positioned to make better physician performance improvement decisions. Applying reliability adjustment to physician-level performance data is relatively new. As others have noted previously, it's important to keep in mind that reliability adjustment adds significant complexity to the production, interpretation and utilization of results. Furthermore, the methods explored in this case study only scratch the surface of the range of available Bayesian methods that can be used for reliability adjustment; further study is needed to test and compare these methods in practice and to examine important extensions for handling specialty-specific concerns (e.g., average case volumes, which have been shown to be important in cardiac surgery outcomes). Moreover, it's important to note that the provider group average as a basis for shrinkage is one of several possible choices that could be employed in practice and deserves further exploration in future research. With these caveats, our results demonstrate that incorporating reliability adjustment into physician performance measurements is feasible and can notably reduce the incidence of "real" signals relative to what one would expect to see using more traditional approaches. A physician leader who is interested in catalyzing performance improvement

International cooperation - a way to improve reliability and safety

International Nuclear Information System (INIS)

John, A.

1998-01-01

The mission of the World Association of Nuclear Operators (WANO) is highlighted, and WANO's Peer Review programme is described. At the Dukovany nuclear power plant, a Peer Review was undertaken in December 1997. The results gave evidence of a good level of safety, reliability and culture of operation of the plant. (P.A.)

Web server's reliability improvements using recurrent neural networks

DEFF Research Database (Denmark)

Madsen, Henrik; Albu, Rǎzvan-Daniel; Felea, Ioan

2012-01-01

In this paper we describe an interesting approach to error prediction illustrated by experimental results. The application consists of monitoring the activity for the web servers in order to collect the specific data. Predicting an error with severe consequences for the performance of a server (t...... usage, network usage and memory usage. We collect different data sets from monitoring the web server's activity and for each one we predict the server's reliability with the proposed recurrent neural network. © 2012 Taylor & Francis Group...

75 FR 58383 - Science Advisory Board Staff Office Request for Nominations of Experts for the Review of Great...

Science.gov (United States)

2010-09-24

... Action Plan identifies outcome-oriented performance goals, objectives, measurable ecological targets, and.... In an effort to obtain nominations of diverse candidates, EPA encourages nominations of women and men...) skills working in committees, subcommittees and advisory panels; and, for the Panel as a whole, (f...

77 FR 41406 - Request for Public Comment on a Nomination to the Office of Health Assessment and Translation

Science.gov (United States)

2012-07-13

..., which was nominated for a possible evaluation by the Office of Health Assessment and Translation (OHAT... substances, or mixtures (collectively referred to as ``substances'') cause adverse health effects and... DEPARTMENT OF HEALTH AND HUMAN SERVICES Request for Public Comment on a Nomination to the Office...

Reliable pipeline repair system for very large pipe size

Energy Technology Data Exchange (ETDEWEB)

Charalambides, John N.; Sousa, Alexandre Barreto de [Oceaneering International, Inc., Houston, TX (United States)

2004-07-01

The oil and gas industry worldwide has been mainly depending on the long-term reliability of rigid pipelines to ensure the transportation of hydrocarbons, crude oil, gas, fuel, etc. Many other methods are also utilized onshore and offshore (e.g. flexible lines, FPSO's, etc.), but when it comes to the underwater transportation of very high volumes of oil and gas, the industry commonly uses large size rigid pipelines (i.e. steel pipes). Oil and gas operators learned to depend on the long-lasting integrity of these very large pipelines and many times they forget or disregard that even steel pipelines degrade over time and more often that that, they are also susceptible to various forms of damage (minor or major, environmental or external, etc.). Over the recent years the industry had recognized the need of implementing an 'emergency repair plan' to account for such unforeseen events and the oil and gas operators have become 'smarter' by being 'pro-active' in order to ensure 'flow assurance'. When we consider very large diameter steel pipelines such as 42' and 48' nominal pipe size (NPS), the industry worldwide does not provide 'ready-made', 'off-the-shelf' repair hardware that can be easily shipped to the offshore location and effect a major repair within acceptable time frames and avoid substantial profit losses due to 'down-time' in production. The typical time required to establish a solid repair system for large pipe diameters could be as long as six or more months (depending on the availability of raw materials). This paper will present in detail the Emergency Pipeline Repair Systems (EPRS) that Oceaneering successfully designed, manufactured, tested and provided to two major oil and gas operators, located in two different continents (Gulf of Mexico, U.S.A. and Arabian Gulf, U.A.E.), for two different very large pipe sizes (42'' and 48'' Nominal Pipe Sizes

77 FR 46112 - Call for Nominations for Advisory Groups, Oregon/Washington

Science.gov (United States)

2012-08-02

... reference from the stakeholder interest area to be represented; (2) A completed background information...). As required by FACA, council membership must be balanced and representative of the various interests... interest in wild horse management on Steens Mountain. Individuals may nominate themselves or others...

77 FR 2345 - Advisory Council on Transportation Statistics; Request for Nominations

Science.gov (United States)

2012-01-17

... and Innovative Technology Administration (RITA), Bureau of Transportation Statistics (BTS), DOT... BTS solicits nominations for interested persons to serve on the ACTS. The ACTS is composed of BTS... transportation statistics and analyses collected, supported, or disseminated by the BTS and DOT. DATES...

Nuclear performance and reliability

International Nuclear Information System (INIS)

Rothwell, G.

1993-01-01

If fewer forced outages are a sign of improved safety, nuclear power plants have become safer and more productive. There has been a significant improvement in nuclear power plant performance, due largely to a decline in the forced outage rate and a dramatic drop in the average number of forced outages per fuel cycle. If fewer forced outages are a sign of improved safety, nuclear power plants have become safer and more productive over time. To encourage further increases in performance, regulatory incentive schemes should reward reactor operators for improved reliability and safety, as well as for improved performance

Power plant siting; an application of the nominal group process technique

International Nuclear Information System (INIS)

Voelker, A.H.

1976-01-01

The application of interactive group processes to the problem of facility siting is examined by this report. Much of the discussion is abstracted from experience gained in applying the Nominal Group Process Technique, an interactive group technique, to the identification and rating of factors important in siting nuclear power plants. Through this experience, interactive group process techniques are shown to facilitate the incorporation of the many diverse factors which play a role in siting. In direct contrast to mathematical optimization, commonly represented as the ultimate siting technique, the Nominal Group Process Technique described allows the incorporation of social, economic, and environmental factors and the quantification of the relative importance of these factors. The report concludes that the application of interactive group process techniques to planning and resource management will affect the consideration of social, economic, and environmental concerns and ultimately lead to more rational and credible siting decisions

High-Reliability Health Care: Getting There from Here

Science.gov (United States)

Chassin, Mark R; Loeb, Jerod M

2013-01-01

Context Despite serious and widespread efforts to improve the quality of health care, many patients still suffer preventable harm every day. Hospitals find improvement difficult to sustain, and they suffer “project fatigue” because so many problems need attention. No hospitals or health systems have achieved consistent excellence throughout their institutions. High-reliability science is the study of organizations in industries like commercial aviation and nuclear power that operate under hazardous conditions while maintaining safety levels that are far better than those of health care. Adapting and applying the lessons of this science to health care offer the promise of enabling hospitals to reach levels of quality and safety that are comparable to those of the best high-reliability organizations. Methods We combined the Joint Commission's knowledge of health care organizations with knowledge from the published literature and from experts in high-reliability industries and leading safety scholars outside health care. We developed a conceptual and practical framework for assessing hospitals’ readiness for and progress toward high reliability. By iterative testing with hospital leaders, we refined the framework and, for each of its fourteen components, defined stages of maturity through which we believe hospitals must pass to reach high reliability. Findings We discovered that the ways that high-reliability organizations generate and maintain high levels of safety cannot be directly applied to today's hospitals. We defined a series of incremental changes that hospitals should undertake to progress toward high reliability. These changes involve the leadership's commitment to achieving zero patient harm, a fully functional culture of safety throughout the organization, and the widespread deployment of highly effective process improvement tools. Conclusions Hospitals can make substantial progress toward high reliability by undertaking several specific

Improving Stochastic Communication Network Performance: Reliability vs. Throughput

Science.gov (United States)

1991-12-01

increased to one. 2) arc survivabil.. ities will be increased in increments of one tenths. and 3) the costs to increase- arc si’rvivabilities were equal and...This reliability value is leni used to maximize the associated expected flow. For Net work A. a bIdget of (8)() pro(duces a tradcoff point at (.58.37...Network B for a buidgel of 2000 which allows a nel \\\\ork relial)ilitv of one to be achieved and a bidget of 1200 which allows for ;, maximum 57

Characteristics of Teachers Nominated for an Accelerated Principal Preparation Program

Science.gov (United States)

Rios, Steve J.; Reyes-Guerra, Daniel

2012-01-01

This article reports the initial evaluation results of a new accelerated, job-embedded principal preparation program funded by a Race to the Top Grant (U.S. Department of Education, 2012a) in Florida. Descriptive statistics, t-tests, and chi-square analyses were used to describe the characteristics of a group of potential applicants nominated to…

verbal nominalization as a derivational process: the case of akan

African Journals Online (AJOL)

KWASI

prefixation between Affix1 and Affix2 renders the output form ill-formed, a case for Siegel's .... Section 3, I present and analyze the Akan data used in this paper. Here I discuss ... grammar. Raimy (2000) describes reduplication as the repetition of a sequence of segments and ... 3.1 Nominalization of Bare/Simple Verb Stems.

Control design for axial flux permanent magnet synchronous motor which operates above the nominal speed

Directory of Open Access Journals (Sweden)

Xuan Minh Tran

2017-04-01

Full Text Available The axial flux permanent magnet synchronous motor (AFPM motor using magnet bearings instead of ball-bearings at both two shaft ends could allow rotational speed of shaft much greater than nominal speed. One of the solutions to increase motor speed higher than its nameplate speed is reducing rotor’s pole magnetic flux of rotor (Yp. This paper proposes a method to boost the speed of AFPM motor above nominal speed by adding a reversed current isd of (Yp.

Integration of nondestructive examination reliability and fracture mechanics

International Nuclear Information System (INIS)

Doctor, S.R.; Bates, D.J.; Charlot, L.A.

1985-01-01

The primary pressure boundaries (pressure vessels and piping) of nuclear power plants are in-service inspected (ISI) according to the rules of ASME Boiler and Pressure Vessel Code, Section XI. Ultrasonic techniques are normally used for these inspections, which are periodically performed on a sampling of welds. The Integration of Nondestructive Examination (NDE) Reliability and Fracture Mechanics (FM) Program at Pacific Northwest Laboratory was established to determine the reliability of current ISI techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this NRC program are to: 1) determine the reliability of ultrasonic ISI performed on commercial light-water reactor primary systems; 2) using probabilistic FM analysis, determine the impact of NDE unreliability on system safety and determine the level of inspection reliability required to ensure a suitably low failure probability; 3) evaluate the degree of reliability improvement that could be achieved using improved and advanced NDE techniques; and 4) based on material properties, service conditions, and NDE uncertainties, formulate recommended revisions to ASME Code, Section XI, and Regulatory Requirements needed to ensure suitably low failure probabilities

Reliability of the emergency AC power system at nuclear power plants

International Nuclear Information System (INIS)

Battle, R.E.; Campbell, D.J.; Baranowsky, P.W.

1983-01-01

The reliability of the emergency ac power systems typical of most nuclear power plants was estimated, and the cost and increase in reliability for several improvements were estimated. Fault trees were constructed based on a detailed design review of the emergency ac power systems of 18 nuclear plants. The failure probabilities used in the fault trees were calculated from extensive historical data collected from Licensee Event Reports (LERs) and from operating experience information obtained from nuclear plant licensees. No one or two improvements can be made at all plants to significantly increase the industry-average emergency ac power system reliability; rather the most beneficial improvements are varied and plant specific. Improvements in reliability and the associated costs are estimated using plant specific designs and failure probabilities

Distribution System Reliability Analysis for Smart Grid Applications

Science.gov (United States)

Aljohani, Tawfiq Masad

Reliability of power systems is a key aspect in modern power system planning, design, and operation. The ascendance of the smart grid concept has provided high hopes of developing an intelligent network that is capable of being a self-healing grid, offering the ability to overcome the interruption problems that face the utility and cost it tens of millions in repair and loss. To address its reliability concerns, the power utilities and interested parties have spent extensive amount of time and effort to analyze and study the reliability of the generation and transmission sectors of the power grid. Only recently has attention shifted to be focused on improving the reliability of the distribution network, the connection joint between the power providers and the consumers where most of the electricity problems occur. In this work, we will examine the effect of the smart grid applications in improving the reliability of the power distribution networks. The test system used in conducting this thesis is the IEEE 34 node test feeder, released in 2003 by the Distribution System Analysis Subcommittee of the IEEE Power Engineering Society. The objective is to analyze the feeder for the optimal placement of the automatic switching devices and quantify their proper installation based on the performance of the distribution system. The measures will be the changes in the reliability system indices including SAIDI, SAIFI, and EUE. The goal is to design and simulate the effect of the installation of the Distributed Generators (DGs) on the utility's distribution system and measure the potential improvement of its reliability. The software used in this work is DISREL, which is intelligent power distribution software that is developed by General Reliability Co.

75 FR 70215 - Environmental Technologies Trade Advisory Committee (ETTAC), Request for Nominations

Science.gov (United States)

2010-11-17

... DEPARTMENT OF COMMERCE International Trade Administration Environmental Technologies Trade...: Notice of solicitation of nominations for membership on the Environmental Technologies Trade Advisory Committee (ETTAC). SUMMARY: The Environmental Technologies Trade Advisory Committee (ETTAC) was established...

Electrical Performance and Reliability Improvement of Amorphous-Indium-Gallium-Zinc-Oxide Thin-Film Transistors with HfO2 Gate Dielectrics by CF4 Plasma Treatment

Science.gov (United States)

Fan, Ching-Lin; Tseng, Fan-Ping; Tseng, Chiao-Yuan

2018-01-01

In this work, amorphous indium-gallium-zinc oxide thin-film transistors (a-IGZO TFTs) with a HfO2 gate insulator and CF4 plasma treatment was demonstrated for the first time. Through the plasma treatment, both the electrical performance and reliability of the a-IGZO TFT with HfO2 gate dielectric were improved. The carrier mobility significantly increased by 80.8%, from 30.2 cm2/V∙s (without treatment) to 54.6 cm2/V∙s (with CF4 plasma treatment), which is due to the incorporated fluorine not only providing an extra electron to the IGZO, but also passivating the interface trap density. In addition, the reliability of the a-IGZO TFT with HfO2 gate dielectric has also been improved by the CF4 plasma treatment. By applying the CF4 plasma treatment to the a-IGZO TFT, the hysteresis effect of the device has been improved and the device’s immunity against moisture from the ambient atmosphere has been enhanced. It is believed that the CF4 plasma treatment not only significantly improves the electrical performance of a-IGZO TFT with HfO2 gate dielectric, but also enhances the device’s reliability. PMID:29772767

Electrical Performance and Reliability Improvement of Amorphous-Indium-Gallium-Zinc-Oxide Thin-Film Transistors with HfO2 Gate Dielectrics by CF4 Plasma Treatment

Directory of Open Access Journals (Sweden)

Ching-Lin Fan

2018-05-01

Full Text Available In this work, amorphous indium-gallium-zinc oxide thin-film transistors (a-IGZO TFTs with a HfO2 gate insulator and CF4 plasma treatment was demonstrated for the first time. Through the plasma treatment, both the electrical performance and reliability of the a-IGZO TFT with HfO2 gate dielectric were improved. The carrier mobility significantly increased by 80.8%, from 30.2 cm2/V∙s (without treatment to 54.6 cm2/V∙s (with CF4 plasma treatment, which is due to the incorporated fluorine not only providing an extra electron to the IGZO, but also passivating the interface trap density. In addition, the reliability of the a-IGZO TFT with HfO2 gate dielectric has also been improved by the CF4 plasma treatment. By applying the CF4 plasma treatment to the a-IGZO TFT, the hysteresis effect of the device has been improved and the device’s immunity against moisture from the ambient atmosphere has been enhanced. It is believed that the CF4 plasma treatment not only significantly improves the electrical performance of a-IGZO TFT with HfO2 gate dielectric, but also enhances the device’s reliability.

10 CFR 960.3-1-4-2 - Site nomination for characterization.

Science.gov (United States)

2010-01-01

... SITES FOR A NUCLEAR WASTE REPOSITORY Implementation Guidelines § 960.3-1-4-2 Site nomination for... site, including lithologic logging and hydrologic and geophysical testing of such boreholes, laboratory testing of core samples for the evaluation of geochemical and engineering rock properties, and chemical...

Increased scientific rigor will improve reliability of research and effectiveness of management

Science.gov (United States)

Sells, Sarah N.; Bassing, Sarah B.; Barker, Kristin J.; Forshee, Shannon C.; Keever, Allison; Goerz, James W.; Mitchell, Michael S.

2018-01-01

Rigorous science that produces reliable knowledge is critical to wildlife management because it increases accurate understanding of the natural world and informs management decisions effectively. Application of a rigorous scientific method based on hypothesis testing minimizes unreliable knowledge produced by research. To evaluate the prevalence of scientific rigor in wildlife research, we examined 24 issues of the Journal of Wildlife Management from August 2013 through July 2016. We found 43.9% of studies did not state or imply a priori hypotheses, which are necessary to produce reliable knowledge. We posit that this is due, at least in part, to a lack of common understanding of what rigorous science entails, how it produces more reliable knowledge than other forms of interpreting observations, and how research should be designed to maximize inferential strength and usefulness of application. Current primary literature does not provide succinct explanations of the logic behind a rigorous scientific method or readily applicable guidance for employing it, particularly in wildlife biology; we therefore synthesized an overview of the history, philosophy, and logic that define scientific rigor for biological studies. A rigorous scientific method includes 1) generating a research question from theory and prior observations, 2) developing hypotheses (i.e., plausible biological answers to the question), 3) formulating predictions (i.e., facts that must be true if the hypothesis is true), 4) designing and implementing research to collect data potentially consistent with predictions, 5) evaluating whether predictions are consistent with collected data, and 6) drawing inferences based on the evaluation. Explicitly testing a priori hypotheses reduces overall uncertainty by reducing the number of plausible biological explanations to only those that are logically well supported. Such research also draws inferences that are robust to idiosyncratic observations and

Empathy and nonattachment independently predict peer nominations of prosocial behavior of adolescents.

Science.gov (United States)

Sahdra, Baljinder K; Ciarrochi, Joseph; Parker, Philip D; Marshall, Sarah; Heaven, Patrick

2015-01-01

There is a plethora of research showing that empathy promotes prosocial behavior among young people. We examined a relatively new construct in the mindfulness literature, nonattachment, defined as a flexible way of relating to one's experiences without clinging to or suppressing them. We tested whether nonattachment could predict prosociality above and beyond empathy. Nonattachment implies high cognitive flexibility and sufficient mental resources to step out of excessive self-cherishing to be there for others in need. Multilevel Poisson models using a sample of 15-year olds (N = 1831) showed that empathy and nonattachment independently predicted prosocial behaviors of helpfulness and kindness, as judged by same-sex and opposite-sex peers, except for when boys nominated girls. The effects of nonattachment remained substantial in more conservative models including self-esteem and peer nominations of liking.

D5.3 Reading reliability report

DEFF Research Database (Denmark)

Cetin, Bilge Kartal; Galiotto, Carlo; Cetin, Kamil

2010-01-01

This deliverable presents a detailed description of the main causes of reading reliability degradation. Two main groups of impairments are recognized: those at the physical layer (e.g., fading, multipath, electromagnetic interference, shadowing due to obstacles, tag orientation misalignment, tag...... bending, metallic environments, etc.) and those at the medium access control sub-layer (e.g., collisions due to tag-to-tag, reader-to-reader and multiple readers-to-tag interference). The review presented in this deliverable covers previous reliability reports and existing definitions of RFID reading...... reliability. Performance metrics and methodologies for assessing reading reliability are further discussed. This document also presents a review of state-of-the-art RFID reading reliability improvement schemes. The solutions are classified into physical- (PHY), medium access control- (MAC), upper-, and cross...

Improvement in the reliability of shells for light water reactors by manufacturing from hollow ingots

International Nuclear Information System (INIS)

Bocquet, P.; Blondeau, R.; Poitrault, I.; Badeau, J.P.; Dumont, R.

1989-01-01

The example of forging shells for PWR type reactors is proposed to show how the choice of the manufacturing process may be of prime importance for the component integrity by the reduction of the detrimental effects of segregations. The forging shells (20MnMoNi55) manufactured from hollow ingot are free of any segregation in the critical area located just at the internal surface and sub-surface. Manufacturing problems associated to these segregations in shells issued from conventional ingots, in particular welding difficulties for cladding, have been reduced or eleminated. The reliability of these components present an improved resistance to irradiation embrittlement. (DG)

Improved structural integrity through advances in reliable residual stress measurement: the impact of ENGIN-X

Science.gov (United States)

Edwards, L.; Santisteban, J. R.

The determination of accurate reliable residual stresses is critical to many fields of structural integrity. Neutron stress measurement is a non-destructive technique that uniquely provides insights into stress fields deep within engineering components and structures. As such, it has become an increasingly important tool within engineering, leading to improved manufacturing processes to reduce stress and distortion as well as to the definition of more precise lifing procedures. This paper describes the likely impact of the next generation of dedicated engineering stress diffractometers currently being constructed and the utility of the technique using examples of residual stresses both beneficial and detrimental to structural integrity.

Improving the reliability of the prognosis of radiation exposures using data assimilation

International Nuclear Information System (INIS)

Twenhoefel, C.J.W.; Eleveld, H.

2003-01-01

Full text: During large-scale nuclear accidents quantitative risk estimates usually underlie a countermeasure strategy. Because of the overwhelming social and economical impact of countermeasures not only the speed but also the reliability of the underlying calculations are of prime importance. Real-time atmospheric dispersion models are an important tool to support the decision-makers with spatial and temporal information on the dispersion forecast and the extent of the expected contamination. Due to the stochastic and chaotic nature of the atmosphere the real-time calculation of air dispersion is quite complicated. The accuracy of the calculated spatial and temporal distributions of air concentration, deposition and the corresponding radiation levels is limited due to uncertainties in the applied dispersion algorithms, limitations in knowledge and availability of atmospheric input data and knowledge of the release and the release conditions during an emergency. To improve the prognosis of the radiation exposure it is envisaged to use the on-line data of the National Radioactivity Monitoring Network. In a first step the monitored gamma radiation levels are related to the calculated external radiation levels from source term estimates based on the plant status. In the next step both the results of air dispersion model calculations and the data of the monitoring network are compared using RIVM's dispersion model validation tool [1-2]. From this a quantitative measure for the agreement between a model run and a particular measurement set can be deduced. This will be followed by a data assimilation technique based an RIVM's validation tool which provides an improved reliability of the prognosis when compared to intermediate, i.e. previous model runs. An uncertainty and sensitivity analysis of the air dispersion model must identify the relevant input parameters. In the absence of elevated levels on our monitoring network the Kincaid data set will be used to demonstrate

Seeking high reliability in primary care: Leadership, tools, and organization.

Science.gov (United States)

Weaver, Robert R

2015-01-01

Leaders in health care increasingly recognize that improving health care quality and safety requires developing an organizational culture that fosters high reliability and continuous process improvement. For various reasons, a reliability-seeking culture is lacking in most health care settings. Developing a reliability-seeking culture requires leaders' sustained commitment to reliability principles using key mechanisms to embed those principles widely in the organization. The aim of this study was to examine how key mechanisms used by a primary care practice (PCP) might foster a reliability-seeking, system-oriented organizational culture. A case study approach was used to investigate the PCP's reliability culture. The study examined four cultural artifacts used to embed reliability-seeking principles across the organization: leadership statements, decision support tools, and two organizational processes. To decipher their effects on reliability, the study relied on observations of work patterns and the tools' use, interactions during morning huddles and process improvement meetings, interviews with clinical and office staff, and a "collective mindfulness" questionnaire. The five reliability principles framed the data analysis. Leadership statements articulated principles that oriented the PCP toward a reliability-seeking culture of care. Reliability principles became embedded in the everyday discourse and actions through the use of "problem knowledge coupler" decision support tools and daily "huddles." Practitioners and staff were encouraged to report unexpected events or close calls that arose and which often initiated a formal "process change" used to adjust routines and prevent adverse events from recurring. Activities that foster reliable patient care became part of the taken-for-granted routine at the PCP. The analysis illustrates the role leadership, tools, and organizational processes play in developing and embedding a reliable-seeking culture across an

A rule induction approach to improve Monte Carlo system reliability assessment

International Nuclear Information System (INIS)

Rocco S, Claudio M.

2003-01-01

A Decision Tree (DT) approach to build empirical models for use in Monte Carlo reliability evaluation is presented. The main idea is to develop an estimation algorithm, by training a model on a restricted data set, and replacing the Evaluation Function (EF) by a simpler calculation, which provides reasonably accurate model outputs. The proposed approach is illustrated with two systems of different size, represented by their equivalent networks. The robustness of the DT approach as an approximated method to replace the EF is also analysed. Excellent system reliability results are obtained by training a DT with a small amount of information

Reliability worth assessment of radial systems with distributed generation

OpenAIRE

Bellart Llavall, Francesc Xavier

2010-01-01

With recent advances in technology, utilities generation (DG) on the distribution systems. Reliability worth is very important in power system planning and operation. Having a DG ensures reli increase the reliability worth. This research project presents the study of a radial distribution system and the impact of placing DG in order to increase the reliability worth. where a DG have to be placed. The reliability improvement is measured by different reliability indices tha...

Improved reliability, accuracy and quality in automated NMR structure calculation with ARIA

Energy Technology Data Exchange (ETDEWEB)

Mareuil, Fabien [Institut Pasteur, Cellule d' Informatique pour la Biologie (France); Malliavin, Thérèse E.; Nilges, Michael; Bardiaux, Benjamin, E-mail: bardiaux@pasteur.fr [Institut Pasteur, Unité de Bioinformatique Structurale, CNRS UMR 3528 (France)

2015-08-15

In biological NMR, assignment of NOE cross-peaks and calculation of atomic conformations are critical steps in the determination of reliable high-resolution structures. ARIA is an automated approach that performs NOE assignment and structure calculation in a concomitant manner in an iterative procedure. The log-harmonic shape for distance restraint potential and the Bayesian weighting of distance restraints, recently introduced in ARIA, were shown to significantly improve the quality and the accuracy of determined structures. In this paper, we propose two modifications of the ARIA protocol: (1) the softening of the force field together with adapted hydrogen radii, which is meaningful in the context of the log-harmonic potential with Bayesian weighting, (2) a procedure that automatically adjusts the violation tolerance used in the selection of active restraints, based on the fitting of the structure to the input data sets. The new ARIA protocols were fine-tuned on a set of eight protein targets from the CASD–NMR initiative. As a result, the convergence problems previously observed for some targets was resolved and the obtained structures exhibited better quality. In addition, the new ARIA protocols were applied for the structure calculation of ten new CASD–NMR targets in a blind fashion, i.e. without knowing the actual solution. Even though optimisation of parameters and pre-filtering of unrefined NOE peak lists were necessary for half of the targets, ARIA consistently and reliably determined very precise and highly accurate structures for all cases. In the context of integrative structural biology, an increasing number of experimental methods are used that produce distance data for the determination of 3D structures of macromolecules, stressing the importance of methods that successfully make use of ambiguous and noisy distance data.

Institutional and Individual Research Productivity in Five Nominated Multicultural Psychology Journals

Science.gov (United States)

Lau, Michael Y.; Cisco, Hilary C.; Delgado-Romero, Edward A.

2008-01-01

Research productivity was examined across 5 highly nominated multicultural psychology journals. This yielded a ranking of 40 highly productive institutions and individuals between 1994 and 2007. The results are potentially useful in beginning to track trends in the publication of multicultural psychology studies in research journals.…

Proposed Reliability/Cost Model

Science.gov (United States)

Delionback, L. M.

1982-01-01

New technique estimates cost of improvement in reliability for complex system. Model format/approach is dependent upon use of subsystem cost-estimating relationships (CER's) in devising cost-effective policy. Proposed methodology should have application in broad range of engineering management decisions.

Domestic manufacturing and reliability improvement of reactor water recirculation equipment

International Nuclear Information System (INIS)

Kobayashi, Hidekazu; Oi, Masao; Shida, Toichi; Yokomori, Takashi

1982-01-01

The reactor coolant recirculation system is one of the important systems to control the reactor output in BWR nuclear power plants. Its components require high reliability and maintainability as well as controllability. For many Japanese nuclear power plants, recirculation pumps, fluid couplings and others have been imported so far. Hitachi Ltd. has established a domestic manufacturing organization through the development and test of these equipment. The fundamental design conditions for these equipment are the improvement of the rate of utilization of plant facility, the capability to follow load, and output power stability. In this paper, the specifications, the investigation of moment of inertia and the design features of recirculation pumps, driving motors and variable frequency power supply systems are described. The paper also reports on the combination test implemented to evaluate the recirculation system. The combination test includes the test using water rheostat for the power source facility and the loading test for a recirculation pump. The application of those system equipment to an actual plant was analyzed and evaluated on a basis of the test data obtained. The result showed that the equipment can achieve the rate of change of reactor power of 30%/min. Those equipment have been employed for No. 2 reactor plant of the Fukushima No. 2 Nuclear Power Station, the Tokyo Electric Power Co., Inc. (Wakatsuki, Y.)

Reliability of provocative tests of motion sickness susceptibility

Science.gov (United States)

Calkins, D. S.; Reschke, M. F.; Kennedy, R. S.; Dunlop, W. P.

1987-01-01

Test-retest reliability values were derived from motion sickness susceptibility scores obtained from two successive exposures to each of three tests: (1) Coriolis sickness sensitivity test; (2) staircase velocity movement test; and (3) parabolic flight static chair test. The reliability of the three tests ranged from 0.70 to 0.88. Normalizing values from predictors with skewed distributions improved the reliability.

Nondestructive examination (NDE) reliability for inservice inspection of light water reactors

International Nuclear Information System (INIS)

Doctor, S.R.; Deffenbaugh, J.D.; Good, M.S.; Green, E.R.; Heasler, P.G.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.

1989-10-01

The Evaluation and Improvement of NDE Reliability for Inservice Inspection of Light Water Reactors (NDE Reliability) Program at the Pacific Northwest Laboratory was established by the Nuclear Regulatory Commission to determine the reliability of current inservice inspection (ISI) techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this program include determining the reliability of ISI performed on the primary systems of commercial light-water reactors (LWRs); using probabilistic fracture mechanics analysis to determine the impact of NDE unreliability on system safety; and evaluating reliability improvement that can be achieved with improved and advanced technology. A final objective is to formulate recommended revisions to ASME Code and Regulatory requirements based on material properties, service conditions, and NDE capabilities and uncertainties. The program scope is limited to ISI of the primary systems including the piping, vessel, and other inspected components. This is a progress report covering the programmatic work from October 1987 through March 1988. 21 refs., 28 figs., 2 tabs

Nondestructive examination (NDE) reliability for inservice inspection of light waters reactors

International Nuclear Information System (INIS)

Doctor, S.R.; Deffenbaugh, J.D.; Good, M.S.; Green, E.R.; Heasler, P.G.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.

1989-11-01

Evaluation and Improvement of NDE Reliability for Inservice Inspection of Light Water Reactors (NDE Reliability) Program at the Pacific Northwest Laboratory was established by the Nuclear Regulatory Commission to determine the reliability of current inservice inspection (ISI) techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this program include determining the reliability of ISI performed on the primary systems of commercial light-water reactors (LWRs); using probabilistic fracture mechanics analysis to determine the impact of NDE unreliability on system safety; and evaluating reliability improvements that can be achieved with improved and advanced technology. A final objective is to formulate recommended revisions to ASME Code and Regulatory requirements, based on material properties, service conditions, and NDE uncertainties. The program scope is limited to ISI of the primary systems including the piping, vessel, and other inspected components. This is a progress report covering the programmatic work from April 1988 through September 1988. 33 refs., 70 figs., 12 tabs

Nondestructive Examination (NDE) Reliability for Inservice Inspection of Light Water Reactors

International Nuclear Information System (INIS)

Doctor, S.R.; Diaz, A.A.; Friley, J.R.

1993-09-01

The Evaluation and Improvement of NDE Reliability for Inservice Inspection of Light Water Reactors (NDE Reliability) Program at the Pacific Northwest Laboratory was established by the Nuclear Regulatory Commission to determine the reliability of current inservice inspection (ISI) techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this program include determining the reliability of ISI performed on the primary systems of commercial light-water reactors (LWRs); using probabilistic fracture mechanics analysis to determine the impact of NDE unreliability on system safety; and evaluating reliability improvements that can be achieved with improved and advanced technology. A final objective is to formulate recommended revisions to ASME Code and Regulatory requirements, based on material properties, service conditions, and NDE uncertainties. The program scope is limited to ISI of the primary systems including the piping, vessel, and other components inspected in accordance with Section XI of the ASME Code. This is a progress report covering the programmatic work from October 1991 through March 1992

Improved reliability in skeletal age assessment using a pediatric hand MR scanner with a 0.3T permanent magnet.

Science.gov (United States)

Terada, Yasuhiko; Kono, Saki; Uchiumi, Tomomi; Kose, Katsumi; Miyagi, Ryo; Yamabe, Eiko; Fujinaga, Yasunari; Yoshioka, Hiroshi

2014-01-01

The purpose of this study was to improve the reliability and validity of skeletal age assessment using an open and compact pediatric hand magnetic resonance (MR) imaging scanner. We used such a scanner with 0.3-tesla permanent magnet to image the left hands of 88 healthy children (aged 3.4 to 15.7 years, mean 8.8 years), and 3 raters (2 orthopedic specialists and a radiologist) assessed skeletal age using those images. We measured the strength of agreement in ratings by values of weighted Cohen's κ and the proportion of cases excluded from rating because of motion artifact and inappropriate positioning. We compared the current results with those of a previous study in which 93 healthy children (aged 4.1 to 16.4 years, mean 9.7 years) were examined with an adult hand scanner. The κ values between raters exceeded 0.80, which indicates almost perfect agreement, and most were higher than those of the previous study. The proportion of cases excluded from rating because of motion artifact or inappropriate positioning was also reduced. The results indicate that use of the compact pediatric hand scanner improved the reliability and validity of skeletal age assessments.

Near-misses are an opportunity to improve patient safety: adapting strategies of high reliability organizations to healthcare.

Science.gov (United States)

Van Spall, Harriette; Kassam, Alisha; Tollefson, Travis T

2015-08-01

Near-miss investigations in high reliability organizations (HROs) aim to mitigate risk and improve system safety. Healthcare settings have a higher rate of near-misses and subsequent adverse events than most high-risk industries, but near-misses are not systematically reported or analyzed. In this review, we will describe the strategies for near-miss analysis that have facilitated a culture of safety and continuous quality improvement in HROs. Near-miss analysis is routine and systematic in HROs such as aviation. Strategies implemented in aviation include the Commercial Aviation Safety Team, which undertakes systematic analyses of near-misses, so that findings can be incorporated into Standard Operating Procedures (SOPs). Other strategies resulting from incident analyses include Crew Resource Management (CRM) for enhanced communication, situational awareness training, adoption of checklists during operations, and built-in redundancy within systems. Health care organizations should consider near-misses as opportunities for quality improvement. The systematic reporting and analysis of near-misses, commonplace in HROs, can be adapted to health care settings to prevent adverse events and improve clinical outcomes.

Design for Reliability of Power Electronic Systems

DEFF Research Database (Denmark)

Wang, Huai; Ma, Ke; Blaabjerg, Frede

2012-01-01

Advances in power electronics enable efficient and flexible processing of electric power in the application of renewable energy sources, electric vehicles, adjustable-speed drives, etc. More and more efforts are devoted to better power electronic systems in terms of reliability to ensure high......). A collection of methodologies based on Physics-of-Failure (PoF) approach and mission profile analysis are presented in this paper to perform reliability-oriented design of power electronic systems. The corresponding design procedures and reliability prediction models are provided. Further on, a case study...... on a 2.3 MW wind power converter is discussed with emphasis on the reliability critical components IGBTs. Different aspects of improving the reliability of the power converter are mapped. Finally, the challenges and opportunities to achieve more reliable power electronic systems are addressed....

Reliability Growth in Space Life Support Systems

Science.gov (United States)

Jones, Harry W.

2014-01-01

A hardware system's failure rate often increases over time due to wear and aging, but not always. Some systems instead show reliability growth, a decreasing failure rate with time, due to effective failure analysis and remedial hardware upgrades. Reliability grows when failure causes are removed by improved design. A mathematical reliability growth model allows the reliability growth rate to be computed from the failure data. The space shuttle was extensively maintained, refurbished, and upgraded after each flight and it experienced significant reliability growth during its operational life. In contrast, the International Space Station (ISS) is much more difficult to maintain and upgrade and its failure rate has been constant over time. The ISS Carbon Dioxide Removal Assembly (CDRA) reliability has slightly decreased. Failures on ISS and with the ISS CDRA continue to be a challenge.

77 FR 52347 - Request for Nominations of Members To Serve on the Bureau of Indian Education Advisory Board for...

Science.gov (United States)

2012-08-29

... DEPARTMENT OF THE INTERIOR Bureau of Indian Affairs Request for Nominations of Members To Serve on the Bureau of Indian Education Advisory Board for Exceptional Children AGENCY: Bureau of Indian Affairs, Interior. ACTION: Notice of Request for Nominations. SUMMARY: Pursuant to the Federal Advisory...

Modification indices for the 2-pl and the nominal response model

NARCIS (Netherlands)

Glas, Cornelis A.W.

1999-01-01

In this paper, it is shown that various violations of the 2-PL model and the nominal response model can be evaluated using the Lagrange multiplier test or the equivalent efficient score test. The tests presented here focus on violation of local stochastic independence and insufficient capture of the

36 CFR 290.3 - Nomination, evaluation, and designation of significant caves.

Science.gov (United States)

2010-07-01

..., DEPARTMENT OF AGRICULTURE CAVE RESOURCES MANAGEMENT § 290.3 Nomination, evaluation, and designation of... on National Forest System lands shall possess one or more of the following features, characteristics... information. (4) Hydrologic. The cave is a part of a hydrologic system or contains water which is important to...

Financial Constraints and Nominal Price Rigidities

DEFF Research Database (Denmark)

Menno, Dominik Francesco; Balleer, Almut; Hristov, Nikolay

This paper investigates how financial market imperfections and the frequency of price adjustment interact. Based on new firm-level evidence for Germany, we document that financially constrained firms adjust prices more often than their unconstrained counterparts, both upwards and downwards. We show...... that these empirical patterns are consistent with a partial equilibrium menu-cost model with a working capital constraint. We then use the model to show how the presence of financial frictions changes profits and the price distribution of firms compared to a model without financial frictions. Our results suggest...... that tighter financial constraints are associated with higher nominal rigidities, higher prices and lower output. Moreover, in response to aggregate shocks, aggregate price rigidity moves substantially, the response of inflation is dampened, while output reacts more in the presence of financial frictions...

Fuel reliability experience in Finland

International Nuclear Information System (INIS)

Kekkonen, L.

2015-01-01

Four nuclear reactors have operated in Finland now for 35-38 years. The two VVER-440 units at Loviisa Nuclear Power Plant are operated by Fortum and two BWR’s in Olkiluoto are operated by Teollisuuden Voima Oyj (TVO). The fuel reliability experience of the four reactors operating currently in Finland has been very good and the fuel failure rates have been very low. Systematic inspection of spent fuel assemblies, and especially all failed assemblies, is a good practice that is employed in Finland in order to improve fuel reliability and operational safety. Investigation of the root cause of fuel failures is important in developing ways to prevent similar failures in the future. The operational and fuel reliability experience at the Loviisa Nuclear Power Plant has been reported also earlier in the international seminars on WWER Fuel Performance, Modelling and Experimental Support. In this paper the information on fuel reliability experience at Loviisa NPP is updated and also a short summary of the fuel reliability experience at Olkiluoto NPP is given. Keywords: VVER-440, fuel reliability, operational experience, poolside inspections, fuel failure identification. (author)

Individual Differences in Human Reliability Analysis

Energy Technology Data Exchange (ETDEWEB)

Jeffrey C. Joe; Ronald L. Boring

2014-06-01

While human reliability analysis (HRA) methods include uncertainty in quantification, the nominal model of human error in HRA typically assumes that operator performance does not vary significantly when they are given the same initiating event, indicators, procedures, and training, and that any differences in operator performance are simply aleatory (i.e., random). While this assumption generally holds true when performing routine actions, variability in operator response has been observed in multiple studies, especially in complex situations that go beyond training and procedures. As such, complexity can lead to differences in operator performance (e.g., operator understanding and decision-making). Furthermore, psychological research has shown that there are a number of known antecedents (i.e., attributable causes) that consistently contribute to observable and systematically measurable (i.e., not random) differences in behavior. This paper reviews examples of individual differences taken from operational experience and the psychological literature. The impact of these differences in human behavior and their implications for HRA are then discussed. We propose that individual differences should not be treated as aleatory, but rather as epistemic. Ultimately, by understanding the sources of individual differences, it is possible to remove some epistemic uncertainty from analyses.

Shock reliability analysis and improvement of MEMS electret-based vibration energy harvesters

International Nuclear Information System (INIS)

Renaud, M; Goedbloed, M; De Nooijer, C; Van Schaijk, R; Fujita, T

2015-01-01

Vibration energy harvesters can serve as a replacement solution to batteries for powering tire pressure monitoring systems (TPMS). Autonomous wireless TPMS powered by microelectromechanical system (MEMS) electret-based vibration energy harvester have been demonstrated. The mechanical reliability of the MEMS harvester still has to be assessed in order to bring the harvester to the requirements of the consumer market. It should survive the mechanical shocks occurring in the tire environment. A testing procedure to quantify the shock resilience of harvesters is described in this article. Our first generation of harvesters has a shock resilience of 400 g, which is far from being sufficient for the targeted application. In order to improve this aspect, the first important aspect is to understand the failure mechanism. Failure is found to occur in the form of fracture of the device’s springs. It results from impacts between the anchors of the springs when the harvester undergoes a shock. The shock resilience of the harvesters can be improved by redirecting these impacts to nonvital parts of the device. With this philosophy in mind, we design three types of shock absorbing structures and test their effect on the shock resilience of our MEMS harvesters. The solution leading to the best results consists of rigid silicon stoppers covered by a layer of Parylene. The shock resilience of the harvesters is brought above 2500 g. Results in the same range are also obtained with flexible silicon bumpers, which are simpler to manufacture. (paper)