Moving Beyond IGY: An Electronic Geophysical Year (eGY) Concept

Science.gov (United States)

Baker, D. N.; Barton, C. E.; Rodger, A. S.; Thompson, B. J.; Fraser, B.; Papitashvili, V.

2003-12-01

During the International Geophysical Year (1957-1958), member countries established many new geophysical observatories pursuing the major IGY objectives - to collect geophysical data as widely as possible and to provide free access to these data for all scientists around the globe. Today, geophysics has attained a rather good understanding within traditional regions, i.e., the atmosphere, ionosphere, magnetosphere, and other such geospheres. At the same time, it has become clear that much of the new and important science is coming from the studies of interfaces and coupling between geospheres. Thus, if geophysical data are made `'transparently'' available to a much wider range of scientists and students than to those who do the observations, then new and exciting discoveries can be expected. An International Association of Geomagnetic and Aeronomy (IAGA) task force, recognizing that a key achievement of the IGY was the establishment of a worldwide system of data centers and physical observatories, proposes that for the 50th anniversary of IGY, the worldwide scientific community should endorse and promote an electronic Geophysical Year (eGY) initiative. The proposed eGY concept would both commemorate the IGY in 2007-2008 and provide a forward impetus to geophysics in 21st century, similar to that provided by the IGY fifty years ago. The IAGA task force strongly advocates: (1) Securing permission and release of existing data; (2) Creating access to information; and (3) Conversion of relevant analog data to digital form. The eGY concept embraces all available and upcoming geophysical data (e.g., atmospheric, ionospheric, geomagnetic, gravity, etc.) through the establishment of a series of virtual geophysical observatories now being `'deployed'' in cyberspace. The eGY concept is modern, global, and timely; it is attractive, pragmatic, and affordable. The eGY is based on the existing and continually developing computing/networking technologies (e.g., XML, Semantic Web

IGI (the Italian Grid initiative) and its impact on the Astrophysics community

Science.gov (United States)

Pasian, F.; Vuerli, C.; Taffoni, G.

IGI - the Association for the Italian Grid Infrastructure - has been established as a consortium of 14 different national institutions to provide long term sustainability to the Italian Grid. Its formal predecessor, the Grid.it project, has come to a close in 2006; to extend the benefits of this project, IGI has taken over and acts as the national coordinator for the different sectors of the Italian e-Infrastructure present in EGEE. IGI plans to support activities in a vast range of scientificdisciplines - e.g. Physics, Astrophysics, Biology, Health, Chemistry, Geophysics, Economy, Finance - and any possible extensions to other sectors such as Civil Protection, e-Learning, dissemination in Universities and secondary schools. Among these, the Astrophysics community is active as a user, by porting applications of various kinds, but also as a resource provider in terms of computing power and storage, and as middleware developer.

Effect of chicken egg yolk antibodies (IgY against diarrhea in domesticated animals: a systematic review and meta-analysis.

Directory of Open Access Journals (Sweden)

Thirumalai Diraviyam

Full Text Available BACKGROUND: IgY antibodies are serum immunoglobulin in birds, reptiles and amphibians, and are transferred from serum to egg yolk to confer passive immunity to their embryos and offspring. Currently, the oral passive immunization using chicken IgY has been focused as an alternative to antibiotics for the treatment and control of diarrhea in animals and humans. This systematic review was focused to determine the effect of IgY in controlling and preventing diarrhea in domesticated animals including Piglets, Mice, Poultry and Calves. METHODS AND RESULTS: Previous research reports focused on treatment effect of Chicken IgY against diarrhea were retrieved from different electronic data bases (MEDLINE, EMBASE, SPRINGER-LINK, WILEY, AGRICOLA, MEDWELL Journals, Scientific Publish, Chinese articles from Core periodicals in 2012. A total of 61 studies in 4 different animal classes met the inclusion criteria. Data on study characteristics and outcome measures were extracted. The pooled relative risk (RR of 49 studies of different animals [Piglets--22; Mice--14; Poultry--7 and Calves--6] in meta-analyses revealed that, IgY significantly reduced the risk of diarrhea in treatment group when compare to the placebo. However, the 95% confidence intervals of the majority of studies in animal class piglets and calves embrace RR of one. The same results were obtained in sub group analyses (treatment regiment--prophylactic or therapeutic; pathogen type--bacterial or viral. Perhaps, this inconsistency in the effect of IgY at the individual study level and overall effect measures could be influenced by the methodological heterogeneity. CONCLUSION: The present systematic review (SR and meta-analysis demonstrated the beneficial effect of IgY. This supports the opinion that IgY is useful for prophylaxis and treatment. However, more intensive studies using the gold standard animal experiments with the focus to use IgY alone or in combination with other alternative

RPE vs. Percentage 1RM Loading in Periodized Programs Matched for Sets and Repetitions

Directory of Open Access Journals (Sweden)

Eric R. Helms

2018-03-01

Full Text Available Purpose: To investigate differences between rating of perceived exertion (RPE and percentage one-repetition maximum (1RM load assignment in resistance-trained males (19–35 years performing protocols with matched sets and repetitions differentiated by load-assignment.Methods: Participants performed squats then bench press 3x/weeks in a daily undulating format over 8-weeks. Participants were counterbalanced by pre-test 1RM then assigned to percentage 1RM (1RMG, n = 11; load-assignment via percentage 1RMs, or RPE groups (RPEG, n = 10; participant-selected loads to reach target RPE ranges. Ultrasonography determined pre and post-test pectoralis (PMT, and vastus lateralis muscle thickness at 50 (VLMT50 and 70% (VLMT70 femur-length.Results: Bench press (1RMG +9.64 ± 5.36; RPEG + 10.70 ± 3.30 kg, squat (1RMG + 13.91 ± 5.89; RPEG + 17.05 ± 5.44 kg and their combined-total 1RMs (1RMG + 23.55 ± 10.38; RPEG + 27.75 ± 7.94 kg increased (p < 0.05 in both groups as did PMT (1RMG + 1.59 ± 1.33; RPEG +1.90 ± 1.91 mm, VLMT50 (1RMG +2.13 ± 1.95; RPEG + 1.85 ± 1.97 mm and VLMT70 (1RMG + 2.40 ± 2.22; RPEG + 2.31 ± 2.27 mm. Between-group differences were non-significant (p > 0.05. Magnitude-based inferences revealed 79, 57, and 72% chances of mean small effect size (ES advantages for squat; ES 90% confidence limits (CL = 0.50 ± 0.63, bench press; ES 90% CL = 0.28 ± 0.73, and combined-total; ES 90% CL = 0.48 ± 0.68 respectively, in RPEG. There were 4, 14, and 6% chances 1RMG had a strength advantage of the same magnitude, and 18, 29, and 22% chances, respectively of trivial differences between groups.Conclusions: Both loading-types are effective. However, RPE-based loading may provide a small 1RM strength advantage in a majority of individuals.

Synthesis of Single-Walled Carbon Nanotubes: Effects of Active Metals, Catalyst Supports, and Metal Loading Percentage

Directory of Open Access Journals (Sweden)

Wei-Wen Liu

2013-01-01

Full Text Available The effects of active metals, catalyst supports, and metal loading percentage on the formation of single-walled carbon nanotubes (SWNTs were studied. In particular, iron, cobalt, and nickel were investigated for SWNTs synthesis. Iron was found to grow better-quality SWNTs compared to cobalt and nickel. To study the effect of catalyst supports, magnesium oxide, silicon oxide, and aluminium oxide were chosen for iron. Among the studied supports, MgO was identified to be a suitable support for iron as it produced SWNTs with better graphitisation determined by Raman analysis. Increasing the iron loading decreased the quality of SWNTs due to extensive agglomeration of the iron particles. Thus, lower metal loading percentage is preferred to grow better-quality SWNTs with uniform diameters.

Effect of Chicken Egg Yolk Antibodies (IgY) against Diarrhea in Domesticated Animals: A Systematic Review and Meta-Analysis

Science.gov (United States)

Diraviyam, Thirumalai; Zhao, Bin; Wang, Yuan; Schade, Ruediger; Michael, Antonysamy; Zhang, Xiaoying

2014-01-01

Background IgY antibodies are serum immunoglobulin in birds, reptiles and amphibians, and are transferred from serum to egg yolk to confer passive immunity to their embryos and offspring. Currently, the oral passive immunization using chicken IgY has been focused as an alternative to antibiotics for the treatment and control of diarrhea in animals and humans. This systematic review was focused to determine the effect of IgY in controlling and preventing diarrhea in domesticated animals including Piglets, Mice, Poultry and Calves. Methods and Results Previous research reports focused on treatment effect of Chicken IgY against diarrhea were retrieved from different electronic data bases (MEDLINE, EMBASE, SPRINGER-LINK, WILEY, AGRICOLA, MEDWELL Journals, Scientific Publish, Chinese articles from Core periodicals in 2012). A total of 61 studies in 4 different animal classes met the inclusion criteria. Data on study characteristics and outcome measures were extracted. The pooled relative risk (RR) of 49 studies of different animals [Piglets – 22; Mice – 14; Poultry – 7 and Calves – 6] in meta-analyses revealed that, IgY significantly reduced the risk of diarrhea in treatment group when compare to the placebo. However, the 95% confidence intervals of the majority of studies in animal class piglets and calves embrace RR of one. The same results were obtained in sub group analyses (treatment regiment – prophylactic or therapeutic; pathogen type – bacterial or viral). Perhaps, this inconsistency in the effect of IgY at the individual study level and overall effect measures could be influenced by the methodological heterogeneity. Conclusion The present systematic review (SR) and meta-analysis demonstrated the beneficial effect of IgY. This supports the opinion that IgY is useful for prophylaxis and treatment. However, more intensive studies using the gold standard animal experiments with the focus to use IgY alone or in combination with other alternative

Chicken IgY Fc expressed by Eimeria mitis enhances the immunogenicity of E. mitis.

Science.gov (United States)

Qin, Mei; Tang, Xinming; Yin, Guangwen; Liu, Xianyong; Suo, Jingxia; Tao, Geru; Ei-Ashram, Saeed; Li, Yuan; Suo, Xun

2016-03-21

Eimeria species are obligate intracellular apicomplexan parasites, causing great economic losses in the poultry industry. Currently wild-and attenuated- type anticoccidial vaccines are used to control coccidiosis. However, their use in fast growing broilers is limited by vaccination side effects caused by medium and/or low immunogenic Eimeria spp. There is, therefore, a need for a vaccine with high immunogenicity for broilers. The avian yolk sac IgY Fc is the avian counterpart of the mammalian IgG Fc, which enhances immunogenicity of Fc-fusion proteins. Here, we developed a stable transgenic Eimeria mitis expressing IgY Fc (Emi.chFc) and investigated whether the avian IgY Fc fragment enhances the immunogenicity of E. mitis. Two-week-old broilers were immunized with either Emi.chFc or wild type Eimeria and challenged with wild type E. mitis to analyze the protective properties of transgenic Emi.chFc. Chickens immunized with Emi.chFc had significantly lower oocyst output, in comparison with PBS, mock control (transgenic E. mitis expressing HA1 from H9N2 avian influenza virus) and wildtype E. mitis immunized groups after challenge, indicating that IgY Fc enhanced the immunogenicity of E. mitis. Our findings suggest that IgY Fc-expressing Eimeria may be a better coccidiosis vaccine, and transgenic Eimeria expressing Fc-fused exogenous antigens may be used as a novel vaccine-delivery vehicle against a wide variety of pathogens.

IgY Technology: Extraction of Chicken Antibodies from Egg Yolk by Polyethylene Glycol (PEG) Precipitation

Science.gov (United States)

Pauly, Diana; Chacana, Pablo A.; Calzado, Esteban G.; Brembs, Björn; Schade, Rüdiger

2011-01-01

Hens can be immunized by means of i.m. vaccination (Musculus pectoralis, left and right, injection volume 0.5-1.0 ml) or by means of Gene-Gun plasmid-immunization. Dependent on the immunogenicity of the antigen, high antibody-titres (up to 1:100,000 - 1:1,000,000) can be achieved after only one or 3 - 4 boost immunizations. Normally, a hen lays eggs continuously for about 72 weeks, thereafter the laying capacity decreases. This protocol describes the extraction of total IgY from egg yolk by means of a precipitation procedure (PEG. Polson et al. 1980). The method involves two important steps. The first one is the removal of lipids and the second is the precipitation of total IgY from the supernatant of step one. After dialysis against a buffer (normally PBS) the IgY-extract can be stored at -20°C for more than a year. The purity of the extract is around 80 %, the total IgY per egg varies from 40-80 mg, dependent on the age of the laying hen. The total IgY content increases with the age of the hen from around 40 mg/egg up to 80 mg/egg (concerning PEG precipitation). The laying capacity of a hen per year is around 325 eggs. That means a total potential harvest of 20 g total IgY/year based on a mean IgY content of 60 mg total IgY/egg (see Table 1). PMID:21559009

Effect of Chicken Egg Yolk Antibodies (IgY) against Diarrhea in Domesticated Animals: A Systematic Review and Meta-Analysis

OpenAIRE

Diraviyam, Thirumalai; Zhao, Bin; Wang, Yuan; Schade, Ruediger; Michael, Antonysamy; Zhang, Xiaoying

2014-01-01

Background IgY antibodies are serum immunoglobulin in birds, reptiles and amphibians, and are transferred from serum to egg yolk to confer passive immunity to their embryos and offspring. Currently, the oral passive immunization using chicken IgY has been focused as an alternative to antibiotics for the treatment and control of diarrhea in animals and humans. This systematic review was focused to determine the effect of IgY in controlling and preventing diarrhea in domesticated animals includ...

[Clinical study on the effect of anti-gingivitis IgY toothpaste in control of gingivitis and dental plaque].

Science.gov (United States)

Zhang, Wei; Feng, Xi-Ping; Tao, Dan-Ying; Chen, Jian-Fen

2016-08-01

To observe the effect of anti-gingivitis IgY toothpaste in control of gingivitis and plaque. The study was a double-blind, randomized, parallel-controlled clinical trail with a total of 100 subjects who were divided into two groups, experimental group and control group. The subjects in experimental group used anti-gingivitis IgY toothpaste to brush twice daily for 3 minutes, and the subjects in control group used none anti-gingivitis IgY toothpaste. The examiner recorded GI, PI and BOP index of all subjects at the baseline, 6-weeks and 12-weeks. SPSS21.0 software package was used for statistical analysis. Twelve weeks later, there were significant differences in GI and BOP between the two groups. Yet no significant difference was found in PI. Anti-gingivitis IgY toothpaste is effective in control of gingivitis.

Quantitative immunochemistry using IgG and IgY against plant ...

African Journals Online (AJOL)

Quantitative immunochemistry using IgG and IgY against plant hormones. ... both of animal origin, using chemical couplings to their respective functional groups. ... enzyme-linked immunosorbent assay; ELISA) to detect and quantify these ...

Production of IgY by layers injected with Salmonella typhimurium

Directory of Open Access Journals (Sweden)

Hee, H. L.

2017-06-01

Full Text Available In the present study, production of IgY and performance of layers immunised with Salmonella typhimurium were evaluated. Thirty 23-wk old layers (Lohmann Brown with average body weight of 1.6 � 0.03 kg. were randomly and equally divided into two groups. Both groups were placed in a specific pathogen free room equipped with an exhaust fan. The layers were placed in single battery cages with slightly tilted floor which allowed eggs to roll straight into the collecting tray. Lyophilized, attenuated whole cells of S. typhimurium strain [serotype: Somatic (O, antigen 1, 4, (5, 12, flagella (H N12 phase I: 1; phase II: 1, 2 (Group B] that were emulsified with Freund�s complete adjuvant were used to immunise the layers intramuscularly 3 times at 2-wk interval (treatment group. Layers in the control group were injected with a solution of sterilized phosphate-buffered saline (PBS emulsified with an equal volume of Freund�s complete adjuvant. The experimental period lasted for 14 wks. Specific antibodies were detected by enzyme-linked immunosorbent assay. The results showed that the birds lost weight during the injection period, but the weights slowly increased in the following weeks. However, the weight of layers in the treated group remained lower (P<0.05 when compared to the period before injection. The loss in body weight of layers was the result of reduced feed intake, in particular during the injection weeks. Layers in the control group had a higher egg production, by about 10.1% than layers in the treatment group throughout the experimental period. The egg production for layers in treatment group showed a significant decrease (P<0.05 during the immunization period by 28.8%. The egg production significantly increased (P<0.05 to 71.9% after this period, but the production did not reach the level before immunisation. The weight of eggs of treated layers were significantly lower (P<0.05 than the control layers during the injection weeks. The egg

General applicability of chicken egg yolk antibodies: the performance of IgY immunoglobulins raised against the hypoxia-inducible factor 1alpha

OpenAIRE

Camenisch, G; Tini, M; Chilov, D; Kvietikova, I; Srinivas, V; Caro, J; Spielmann, P; Wenger, R H; Gassmann, M

1999-01-01

Avian embryos and neonates acquire passive immunity by transferring maternal immunoglobulins from serum to egg yolk. Despite being a convenient source of antibodies, egg yolk immunoglobulins (IgY) from immunized hens have so far received scant attention in research. Here we report the generation and rapid isolation of IgY from the egg yolk of hens immunized against the alpha subunit of the human hypoxia-inducible factor 1 (HIF-1alpha). Anti-HIF-1alpha IgY antibodies were affinity purified and...

Eficacia experimental de anticuerpos IgY producidos en huevos, contra el veneno de la serpiente peruana Bothrops atrox Experimental efficacy of IgY antibodies produced in eggs against the venom of the Peruvian snake Bothrops atrox

Directory of Open Access Journals (Sweden)

Julio C. Mendoza

2012-03-01

Full Text Available Objetivos. Desarrollar un protocolo de inmunización para producir inmunoglobulinas IgY de origen aviar contra el veneno de la serpiente peruana Bothrops atrox y evaluar la capacidad neutralizante. Materiales y métodos. Se inmunizaron seis gallinas de postura de la raza hy line brown con 500 μg/dosis de veneno de B. atrox en un periodo de dos meses. Cada semana, los huevos fueron colectados para el aislamiento de inmunoglobulinas IgY a partir de la yema, usando dos pasos consecutivos con αcido caprνlico y sulfato de amonio. La detecciσn de anticuerpos se realizσ por inmunodifusiσn doble mientras que el tνtulo y reactividad cruzada se determinaron por las técnicas de ELISA y Western blot. El cálculo de DL50 y de la DE50 del antiveneno IgY producido se realizó utilizando el método de Probits. Resultados. La masa de anticuerpos aislados fue de 8,5 ± 1,35 mg de IgY/mL de yema. Asimismo, la DE50 del antiveneno aviar fue calculada en 575 μL de antiveneno/mg de veneno. Adicionalmente, los ensayos de reactividad cruzada mostraron que el veneno de B. atrox comparte mas epνtopes comunes con el veneno de B. brazili (47% que con otros veneno del mismo género, en tanto que los venenos de Lachesis muta (19% y Crotalus durissus (12% mostraron una baja reactividad cruzada. Conclusiones. Se ha obtenido IgY purificada contra el veneno de B. atrox con capacidad neutralizante y se ha demostrado su utilidad como herramienta inmunoanalítica para evaluar la reactividad cruzada con venenos de otras especies.Objectives. To develop an immunization protocol in order to produce avian IgY immunoglobulins against Bothrops atrox Peruvian snake venom and to evaluate its neutralizing capacity. Materials and methods. Six Hy Line Brown hens were immunized each two weeks using 500μg/doses of B. atrox venom in a period of two months. Each week, eggs were collected for IgY isolation from yolk using two consecutive steps with caprilic acid and ammonium sulfate

Antiparasitic effects induced by polyclonal IgY antibodies anti-phospholipase A2 from Bothrops pauloensis venom.

Science.gov (United States)

Borges, Isabela Pacheco; Silva, Mariana Ferreira; Santiago, Fernanda Maria; de Faria, Lucas Silva; Júnior, Álvaro Ferreira; da Silva, Rafaela José; Costa, Mônica Soares; de Freitas, Vitor; Yoneyama, Kelly Aparecida Geraldo; Ferro, Eloísa Amália Vieira; Lopes, Daiana Silva; Rodrigues, Renata Santos; de Melo Rodrigues, Veridiana

2018-06-01

Activities of phospholipases (PLAs) have been linked to pathogenesis in various microorganisms, and implicated in cell invasion and so the interest in these enzymes as potential targets that could contribute to the control of parasite survival and proliferation. Chicken eggs immunized with BnSP-7, a Lys49 phospholipase A 2 (PLA 2 ) homologue from Bothrops pauloensis snake venom, represent an excellent source of polyclonal antibodies with potential inhibitory activity on parasite PLA s. Herein, we report the production, characterization and anti-parasitic effect of IgY antibodies from egg yolks of hens immunized with BnSP-7. Produced antibodies presented increasing avidity and affinity for antigenic toxin epitopes throughout immunization, attaining a plateau after 4weeks. Pooled egg yolks-purified anti-BnSP-7 IgY antibodies were able to specifically recognize different PLA 2 s from Bothrops pauloensis and Bothrops jararacussu venom. Antibodies also neutralized BnSP-7 cytotoxic activity in C2C12 cells. Also, the antibodies recognized targets in Leishmania (Leishmania) amazonensis and Toxoplasma gondii extracts by ELISA and immunofluorescence assays. Anti-BnSP-7 IgY antibodies were cytotoxic to T. gondii tachyzoite and L. (L.) amazonensis promastigotes, and were able to decrease proliferation of both parasites treated before infection. These data suggest that the anti-BnSP-7 IgY is an important tool for discovering new parasite targets and blocking parasitic effects. Copyright © 2018 Elsevier B.V. All rights reserved.

Egg yolk IgY: protection against rotavirus induced diarrhea and modulatory effect on the systemic and mucosal antibody responses in newborn calves.

Science.gov (United States)

Vega, C; Bok, M; Chacana, P; Saif, L; Fernandez, F; Parreño, V

2011-08-15

Bovine rotavirus (BRV) is an important cause of diarrhea in newborn calves. Local passive immunity is the most efficient protective strategy to control the disease. IgY technology (the use of chicken egg yolk immunoglobulins) is an economic and practical alternative to prevent BRV diarrhea in dairy calves. The aim of this study was to evaluate the protection and immunomodulation induced by the oral administration of egg yolk enriched in BRV specific IgY to experimentally BRV infected calves. All calves in groups Gp 1, 2 and 3 received control colostrum (CC; BRV virus neutralization Ab titer - VN=65,536; ELISA BRV IgG(1)=16,384) prior to gut closure. After gut closure, calves received milk supplemented with 6% BRV-immune egg yolk [(Gp 1) VN=2048; ELISA IgY Ab titer=4096] or non-immune control egg yolk [(Gp 2) VNcontrols (Gp 3 and 4, respectively). Calves were inoculated with 10(5.85)focus forming units (FFU) of virulent BRV IND at 2 days of age. Control calves (Gp 3 and 4) and calves fed control IgY (Gp 2) were infected and developed severe diarrhea. Around 80% calves in Gp 1 (IgY 4096) were infected, but they showed 80% (4/5) protection against BRV diarrhea. Bovine RV-specific IgY Ab were detected in the feces of calves in Gp 1, indicating that avian antibodies (Abs) remained intact after passage through the gastrointestinal tract. At post infection day 21, the duodenum was the major site of BRV specific antibody secreting cells (ASC) in all experimental groups. Mucosal ASC responses of all isotypes were significantly higher in the IgY treated groups, independently of the specificity of the treatment, indicating that egg yolk components modulated the immune response against BRV infection at the mucosal level. These results indicate that supplementing newborn calves' diets for the first 14 days of life with egg yolk enriched in BRV-specific IgY represents a promising strategy to prevent BRV diarrhea. Moreover a strong active ASC immune response is induced in the

Extensive diversification of IgD-, IgY-, and truncated IgY(δFc)-encoding genes in the red-eared turtle (Trachemys scripta elegans).

Science.gov (United States)

Li, Lingxiao; Wang, Tao; Sun, Yi; Cheng, Gang; Yang, Hui; Wei, Zhiguo; Wang, Ping; Hu, Xiaoxiang; Ren, Liming; Meng, Qingyong; Zhang, Ran; Guo, Ying; Hammarström, Lennart; Li, Ning; Zhao, Yaofeng

2012-10-15

IgY(ΔFc), containing only CH1 and CH2 domains, is expressed in the serum of some birds and reptiles, such as ducks and turtles. The duck IgY(ΔFc) is produced by the same υ gene that expresses the intact IgY form (CH1-4) using different transcriptional termination sites. In this study, we show that intact IgY and IgY(ΔFc) are encoded by distinct genes in the red-eared turtle (Trachemys scripta elegans). At least eight IgY and five IgY(ΔFc) transcripts were found in a single turtle. Together with Southern blotting, our data suggest that multiple genes encoding both IgY forms are present in the turtle genome. Both of the IgY forms were detected in the serum using rabbit polyclonal Abs. In addition, we show that multiple copies of the turtle δ gene are present in the genome and that alternative splicing is extensively involved in the generation of both the secretory and membrane-bound forms of the IgD H chain transcripts. Although a single μ gene was identified, the α gene was not identified in this species.

Chicken egg yolk antibodies (IgY) as non-antibiotic production enhancers for use in swine production: a review

OpenAIRE

Li, Xiaoyu; Wang, Lili; Zhen, Yuhong; Li, Shuying; Xu, Yongping

2015-01-01

In recent years, the use of in-feed antibiotics for growth and disease prevention in livestock production has been under severe scrutiny. The use and misuse of in-feed antibiotics has led to problems with drug residues in animal products and increased bacterial resistance. Chicken egg yolk antibodies (IgY) have attracted considerable attention as an alternative to antibiotics to maintain swine health and performance. Oral administration of IgY possesses many advantages over mammalian IgG such...

My IGY in Antarctica

Science.gov (United States)

Bentley, Charles

2012-01-01

Dr Charles Bentley is the A.P. Crary Professor Emeritus of Geophysics, Department of Geology and Geophysics, University of Wisconsin-Madison. Dr. Bentley joined the Arctic Institute of North America in 1956 to participate in International Geophysical Year (IGY)-related activities in the Antarctic. He wintered over consecutively in 1957 and 1958 at Byrd Station, a station in the interior of West Antarctica that housed 24 men each winter - 12 Navy support people and 12 civilian scientists/technicians. During the austral summers, he also participated in over-snow traverses, first as co-leader, then leader (the other coleader went home after the first year). These traverses consisted of six men and three vehicles, and lasted several months. These traverses covered more than 1609 kilometers (1000 miles) of largely unmapped and unphotographed terrain. During these traverses, connections to Byrd Station were by radio (daily, when the transmission conditions were good enough) and roughly every 2 weeks by resupply flight.

Research on the Earth's Interior Conducted by Russia after IGY: The Geotraverse Project and "Intermargins"

Directory of Open Access Journals (Sweden)

A G Rodnikov

2009-04-01

Full Text Available Fifty years have passed since the International Geophysical Year (IGY of 1957.58, one of the most important and noble initiatives in the history of science and in the history of humanity in general. IGY became the model for subsequent international scientific initiatives in various fields of solid Earth research, including the Upper Mantle Project (1961.71, the Geodynamic Project (1971.80, the Geotraverse Project (1987.2003, and the "InterMARGINS" Project (2003. The Russian investigations as part of the Geotraverse Project and "InterMARGINS" were aimed at research into the deep structure of the continental margins of East Eurasia, which are characterized by high seismicity, volcanism, and natural cataclysms hazardous to people living there.

Homogeneous immunoassay for human IgG using oriented hen egg IgY immobilized on gold sol nanoparticles

International Nuclear Information System (INIS)

Yeritsyan, H.E.; Gasparyan, V.K.

2012-01-01

Homogeneous immunoassays using (red) gold nanoparticles represent an attractive detection scheme because of the option of photometric readout. We have applied oriented immobilization of hen egg immunoglobulin Y (IgY) on gold nanoparticles when developing a homogeneous immunoassay for human IgG. In oriented immobilization, as opposed to random immobilization, the antigen binding capabilities of the antibodies are retained. It is shown that such immunoassay has significantly better sensitivity in comparison with methods based on conventional immobilization of affinity-purified antibodies. It is also shown that hen egg IgY is better suited than rabbit antibodies, because much more antibody can be immobilized on gold nanoparticles without any destabilization, probably because of the more acidic nature of these antibodies. In addition, hen egg IgY can be supplied in higher quantity and can be prepared more easily than IgG from rabbits. Bleeding and slaughtering of animals is not needed. The assay presented here has a wide detection range (30-500 ng. mL -1 ) and a limit of detection as low as 30 ng. mL -1 of human IgG. (author)

Anti-Pseudomonas aeruginosa IgY Antibodies Induce Specific Bacterial Aggregation and Internalization in Human Polymorphonuclear Neutrophils

DEFF Research Database (Denmark)

Thomsen, K.; Christophersen, L.; Bjarnsholt, T.

2015-01-01

with P. aeruginosa by augmenting the phagocytic competence of PMNs may postpone the deteriorating chronic biofilm infection. Anti-P. aeruginosa IgY antibodies significantly increase the PMN-mediated respiratory burst and subsequent bacterial killing of P. aeruginosa in vitro. The mode of action...... is attributed to IgY-facilitated formation of immobilized bacteria in aggregates, as visualized by fluorescence microscopy and the induction of increased bacterial hydrophobicity. Thus, the present study demonstrates that avian egg yolk immunoglobulins (IgY) targeting P. aeruginosa modify bacterial fitness...

CARACTERIZACIÓN DE IGYS ANTI-LECTINA DE Salvia bogotensis Y SU APLICACIÓN EN ESTUDIOS CITOQUÍMICOS PARA LA DETECCIÓN DEL ANTÍGENO TN

Directory of Open Access Journals (Sweden)

Nohora Vega

2010-02-01

Full Text Available Las inmunoglobulinas aisladas de la yema de huevo (IgY son muy utilizadas actualmente en diversos campos de las ciencias biológicas, dadas sus ventajas frente a las IgG séricas de mamíferos. En un trabajo previo establecimos las condiciones de obtención de IgY dirigidas contra la lectinas de Salvia bogotensis; su utilización en estudios inmunocitoquímicos requiere conocer sus principales características moleculares y las condiciones para la interacción IgY-lectina. La lectina de Salvia bogotensis (SBoL reconoce específicamente el antígeno Tn, marcador tumoral en muchos tipos de cáncer, pero se requieren herramientas adicionales para evidenciar esta interacción a nivel celular. Dada la disponibilidad de IgY anti-lectina de S. bogotensis, se realizó este trabajo con el objeto de caracterizar molecularmente estas IgY y evaluar su utilización en estudios inmunocitoquímicos para la detección del antígeno Tn en células tumorales. A las IgY purificadas se les determinó su punto isoeléctrico, peso molecular y contenido de carbohidratos. Para establecer la especificidad de interacción IgY-SBoL se obtuvieron lectinas homólogas y heterólogas y se ensayaron por ELLSA. La detección del antígeno Tn en las líneas celulares MCF-7 y HeLa con la lectina y las IgYs marcadas con biotina o peroxidasa se realizó por CELISA e inmunocitoquímica. Los resultados mostraron que los anticuerpos IgY anti-SBoL son una herramienta de una alta sensibilidad para los ensayos de reconocimiento específico del antígeno Tn.

Anti-Interleukin-1 Beta/Tumor Necrosis Factor-Alpha IgY Antibodies Reduce Pathological Allergic Responses in Guinea Pigs with Allergic Rhinitis.

Science.gov (United States)

Wei-Xu, Hu; Wen-Yun, Zhou; Xi-Ling, Zhu; Zhu, Wen; Li-Hua, Wu; Xiao-Mu, Wu; Hui-Ping, Wei; Wen-Ding, Wang; Dan, He; Qin, Xiang; Guo-Zhu, Hu

2016-01-01

This study aims to determine whether the combined blockade of IL-1β and TNF-α can alleviate the pathological allergic inflammatory reaction in the nasal mucosa and lung tissues in allergic rhinitis (AR) guinea pigs. Healthy guinea pigs treated with saline were used as the healthy controls. The AR guinea pigs were randomly divided into (1) the AR model group treated with intranasal saline; (2) the 0.1% nonspecific IgY treatment group; (3) the 0.1% anti-TNF-α IgY treatment group; (4) the 0.1% anti-IL-1β IgY treatment group; (5) the 0.1% combined anti-IL-1β and TNF-α IgY treatment group; and (6) the fluticasone propionate treatment group. The inflammatory cells were evaluated using Wright's staining. Histopathology was examined using hematoxylin-eosin staining. The results showed that the number of eosinophils was significantly decreased in the peripheral blood, nasal lavage fluid, and bronchoalveolar lavage fluid (P guinea pigs. The data suggest that topical blockade of IL-1β and TNF-α could reduce pathological allergic inflammation in the nasal mucosa and lung tissues in AR guinea pigs.

Chicken Egg Yolk Antibodies (IgY) for Prophylaxis and Treatment of Rotavirus Diarrhea in Human and Animal Neonates: A Concise Review

Science.gov (United States)

Thu, Hlaing Myat; Myat, Theingi Win; Win, Mo Mo; Thant, Kyaw Zin; Rahman, Shofiqur; Umeda, Kouji; Nguyen, Sa Van; Icatlo, Faustino C.; Higo-Moriguchi, Kyoko; Taniguchi, Koki; Tsuji, Takao; Oguma, Keiji; Kim, Sang Jong; Bae, Hyun Suk

2017-01-01

The rotavirus-induced diarrhea of human and animal neonates is a major public health concern worldwide. Until recently, no effective therapy is available to specifically inactivate the rotavirion particles within the gut. Passive immunotherapy by oral administration of chicken egg yolk antibody (IgY) has emerged of late as a fresh alternative strategy to control infectious diseases of the alimentary tract and has been applied in the treatment of diarrhea due to rotavirus infection. The purpose of this concise review is to evaluate evidence on the properties and performance of anti-rotavirus immunoglobulin Y (IgY) for prevention and treatment of rotavirus diarrhea in human and animal neonates. A survey of relevant anti-rotavirus IgY basic studies and clinical trials among neonatal animals (since 1994-2015) and humans (since 1982-2015) have been reviewed and briefly summarized. Our analysis of a number of rotavirus investigations involving animal and human clinical trials revealed that anti-rotavirus IgY significantly reduced the severity of clinical manifestation of diarrhea among IgY-treated subjects relative to a corresponding control or placebo group. The accumulated information as a whole depicts oral IgY to be a safe and efficacious option for treatment of rotavirus diarrhea in neonates. There is however a clear need for more randomized, placebo controlled and double-blind trials with bigger sample size to further solidify and confirm claims of efficacy and safety in controlling diarrhea caused by rotavirus infection especially among human infants with health issues such as low birth weights or compromised immunity in whom it is most needed. PMID:28316465

Development and immunochemical evaluation of a novel chicken IgY antibody specific for KLK6

Directory of Open Access Journals (Sweden)

Sotiropoulou Georgia

2012-12-01

Full Text Available Abstract Background Human kallikrein-related peptidase 6 (KLK6 has been implicated in various types of cancer and in neurodegenerative and demyelinating diseases including multiple sclerosis. Further, anti-KLK6 antibodies attenuated disease manifestations in the mouse model of multiple sclerosis. Availability of specific antibodies against KLK6 is fundamental to the development of improved diagnostic and/or immunotherapeutic applications. Here, we exploited the enhanced immunogenicity of mammalian proteins in avian species to generate a polyclonal antibody against KLK6. Results Chicken were immunized with recombinant KLK6 and antibodies Y (IgYs were purified from egg yolk with a simple procedure and evaluated for KLK6 detection by ELISA and Western blot using recombinant proteins and human cell lysates and supernatants. The anti-KLK6 Y polyclonal exhibited high affinity for KLK6 with a detection limit of 30 fmol. On the other hand, the widely used rabbit polyclonal antibody that was raised against the same recombinant KLK6 had a detection limit of 300 fmol. Moreover, the IgYs did not display any crossreactivity with recombinant KLKs or endogenous KLKs and other cellular proteins. Conclusions Based on its high specificity and sensitivity the developed anti-KLK6 IgY is expected to aid the development of improved diagnostic tools for the detection of KLK6 in biological and clinical samples.

Growth inhibition of Staphylococcus aureus and escherichia coli strains by neutralizing IgY antibodies from ostrich egg yolk

Directory of Open Access Journals (Sweden)

Fernando Luiz Tobias

2012-06-01

Full Text Available Ostrich raising around the world have some key factors and farming profit depend largely on information and ability of farmers to rear these animals. Non fertilized eggs from ostriches are discharged in the reproduction season. Staphylococcus aureus and Escherichia coli are microorganisms involved in animal and human diseases. In order to optimize the use of sub products of ostrich raising, non fertilized eggs of four selected birds were utilized for development of polyclonal IgY antibodies. The birds were immunized (200ug/animal with purified recombinant staphylococcal enterotoxin C (recSEC and synthetic recRAP, both derived from S. aureus, and recBFPA and recEspB involved in E. coli pathogenicity, diluted in FCA injected in the braquial muscle. Two subsequent immunization steps with 21 days intervals were repeated in 0,85% saline in FIA. Blood and eggs samples were collected before and after immunization steps. Egg yolk immunoglobulins were purified by precipitation with 19% sodium sulfate and 20% ammonium sulphate methodologies. Purified IgY 50µL aliquots were incubated in 850µL BHI broth containing 50µL inoculums of five strains of S. aureus and five strains of E.coli during four hours at 37ºC. Growth inhibition was evaluated followed by photometry reading (DO550nm. Egg yolk IgY preparation from hiperimmunized birds contained antibodies that inhibited significantly (p<0,05 growth of strains tested. Potential use of ostrich IgY polyclonal antibodies as a diagnostic and therapeutic tool is proposed for diseased animals.

Dengue virus specific IgY provides protection following lethal dengue virus challenge and is neutralizing in the absence of inducing antibody dependent enhancement.

Science.gov (United States)

Fink, Ashley L; Williams, Katherine L; Harris, Eva; Alvine, Travis D; Henderson, Thomas; Schiltz, James; Nilles, Matthew L; Bradley, David S

2017-07-01

Dengue hemorrhagic fever (DHF) and dengue shock syndrome (DSS) are severe disease manifestations that can occur following sequential infection with different dengue virus serotypes (DENV1-4). At present, there are no licensed therapies to treat DENV-induced disease. DHF and DSS are thought to be mediated by serotype cross-reactive antibodies that facilitate antibody-dependent enhancement (ADE) by binding to viral antigens and then Fcγ receptors (FcγR) on target myeloid cells. Using genetically engineered DENV-specific antibodies, it has been shown that the interaction between the Fc portion of serotype cross-reactive antibodies and FcγR is required to induce ADE. Additionally, it was demonstrated that these antibodies were as neutralizing as their non-modified variants, were incapable of inducing ADE, and were therapeutic following a lethal, antibody-enhanced infection. Therefore, we hypothesized that avian IgY, which do not interact with mammalian FcγR, would provide a novel therapy for DENV-induced disease. We demonstrate here that goose-derived anti-DENV2 IgY neutralized DENV2 and did not induce ADE in vitro. Anti-DENV2 IgY was also protective in vivo when administered 24 hours following a lethal DENV2 infection. We were also able to demonstrate via epitope mapping that both full-length and alternatively spliced anti-DENV2 IgY recognized different epitopes, including epitopes that have not been previously identified. These observations provide evidence for the potential therapeutic applications of goose-derived anti-DENV2 IgY.

Dengue virus specific IgY provides protection following lethal dengue virus challenge and is neutralizing in the absence of inducing antibody dependent enhancement.

Directory of Open Access Journals (Sweden)

Ashley L Fink

2017-07-01

Full Text Available Dengue hemorrhagic fever (DHF and dengue shock syndrome (DSS are severe disease manifestations that can occur following sequential infection with different dengue virus serotypes (DENV1-4. At present, there are no licensed therapies to treat DENV-induced disease. DHF and DSS are thought to be mediated by serotype cross-reactive antibodies that facilitate antibody-dependent enhancement (ADE by binding to viral antigens and then Fcγ receptors (FcγR on target myeloid cells. Using genetically engineered DENV-specific antibodies, it has been shown that the interaction between the Fc portion of serotype cross-reactive antibodies and FcγR is required to induce ADE. Additionally, it was demonstrated that these antibodies were as neutralizing as their non-modified variants, were incapable of inducing ADE, and were therapeutic following a lethal, antibody-enhanced infection. Therefore, we hypothesized that avian IgY, which do not interact with mammalian FcγR, would provide a novel therapy for DENV-induced disease. We demonstrate here that goose-derived anti-DENV2 IgY neutralized DENV2 and did not induce ADE in vitro. Anti-DENV2 IgY was also protective in vivo when administered 24 hours following a lethal DENV2 infection. We were also able to demonstrate via epitope mapping that both full-length and alternatively spliced anti-DENV2 IgY recognized different epitopes, including epitopes that have not been previously identified. These observations provide evidence for the potential therapeutic applications of goose-derived anti-DENV2 IgY.

OBTENCIÓN DE ANTICUERPOS POLICLONALES IgY ANTIPARVOVIRUS CANINO A PARTIR DE YEMA DE HUEVO DE GALLINA

Directory of Open Access Journals (Sweden)

Pinto, J.

2005-06-01

Full Text Available Inmunizando un grupo de diez gallinas de postura raza Lohmann de 16 semanas de edad con parvovirus canino (CPV cepa vacunal, se obtuvieron anticuerpos IgY policlonales contra CPV en yema de huevo.En la extracción de los anticuerpos de la yema se requirieron dos pasos, el primero para la remoción de lípidos y el segundo para la precipitación de proteínas. Para la remoción de lípidos se usó el método PBS:Cloroformo y para la precipitación de los anticuerpos solubles (Inmunoglobulinas-IgY se usó el método de salting-out con sulfato de amonio ((NH42SO4. La evaluación del proceso se efectuó empleando el método comercial estándar “EGGstract IgY Purification System®” de PROMEGA.La metodología empleada permitió la obtención de anticuerpos IgY policlonales contra CPV a partir de yema de huevo de gallina en concentraciones altas por mililitro de yema, con una pureza aceptable y títulos altos; los resultados fueron comparables con el método comercial.

Obtención, purificación y caracterización de anticuerpos policlonales IgY desarrollados en gallina, dirigidos contra aislamientos colombianos de Giardia duodenalis.

Directory of Open Access Journals (Sweden)

Dabeiba Adriana García

2005-12-01

Full Text Available Introducción. El desarrollo de anticuerpos policlonales requiere de animales de laboratorio, generalmente, el conejo, que deben sangrarse para su obtención. Como alternativa, se han utilizado las gallinas. Objetivo. Desarrollar anticuerpos policlonales IgY anti-Giardia duodenalis y evaluar diferentes métodos para su purificación a partir de yema de huevo. Materiales y métodos. Se inmunizaron tres gallinas intramuscularmente con trofozoítos del parásito: las inmunizaciones se realizaron a los 0, 15, 30, 45, 60, 90 y 120 días. Se recolectaron huevos en cada etapa de la inmunización y se purificó la IgY por deslipidación (D y precipitación (P mediante cinco protocolos diferentes: M1: (P: sulfato de amonio/D: dextrán sulfato-cloruro de calcio, M2: (D: dextrán sulfato-cloruro de calcio/P: sulfato de amonio, M3: (D: cloroformo/ P: sulfato de amonio 50%, M4: (D: solución A/P:solución B y M5: (D: cloroformo/P: sulfato de amonio 30%. Se realizó evaluación inmunoquímica de la IgY anti-Giardia duodenalis mediante inmunodifusión, contrainmunoelectroforesis e inmunoelectrotransferencia (Western blot; la pureza de IgY por SDS-PAGE en presencia y ausencia de reductor y la concentración de la inmunoglobulina (mg/mL por espectrofotometría y densitometría. Resultados. La IgY anti-G. duodenalis mediante evaluación inmunoquímica presentó títulos hasta de 1:32. La inmunoglobulina en ausencia de reductor mostró una banda de 180 kd y en su presencia bandas de 30 y 68 kd, características de sus cadenas liviana y pesada, respectivamente. Las mayores concentraciones de inmunoglobulina se recuperaron con el método dos (M2, 4,6 mg de IgY por mL de yema de partida. Conclusiones. Por su facilidad y economía de producción en gallinas, los anticuerpos policlonales IgY anti-Giardia así obtenidos podrán utilizarse para desarrollar inmunoensayos que detecten el parásito en eluídos de heces.

Anti-Interleukin-1 Beta/Tumor Necrosis Factor-Alpha IgY Antibodies Reduce Pathological Allergic Responses in Guinea Pigs with Allergic Rhinitis

Directory of Open Access Journals (Sweden)

Hu Wei-xu

2016-01-01

Full Text Available This study aims to determine whether the combined blockade of IL-1β and TNF-α can alleviate the pathological allergic inflammatory reaction in the nasal mucosa and lung tissues in allergic rhinitis (AR guinea pigs. Healthy guinea pigs treated with saline were used as the healthy controls. The AR guinea pigs were randomly divided into (1 the AR model group treated with intranasal saline; (2 the 0.1% nonspecific IgY treatment group; (3 the 0.1% anti-TNF-α IgY treatment group; (4 the 0.1% anti-IL-1β IgY treatment group; (5 the 0.1% combined anti-IL-1β and TNF-α IgY treatment group; and (6 the fluticasone propionate treatment group. The inflammatory cells were evaluated using Wright’s staining. Histopathology was examined using hematoxylin-eosin staining. The results showed that the number of eosinophils was significantly decreased in the peripheral blood, nasal lavage fluid, and bronchoalveolar lavage fluid (P<0.05, and eosinophil, neutrophil, and lymphocyte infiltration and edema were significantly reduced or absent in the nasal mucosa and lung tissues (P<0.05 in the combined 0.1% anti-IL-1β- and TNF-α IgY-treated guinea pigs. The data suggest that topical blockade of IL-1β and TNF-α could reduce pathological allergic inflammation in the nasal mucosa and lung tissues in AR guinea pigs.

Production, Characterization and Use of Monoclonal Antibodies Recognizing IgY Epitopes Shared by Chicken, Turkey, Pheasant, Peafowl and Sparrow

Directory of Open Access Journals (Sweden)

Ajda Biček

2004-01-01

Full Text Available Chicken antibodies are not only a part of immune defense but are more and more popular commercial products in form of chicken polyclonal, monoclonal or recombinant antibodies. We produced and characterized mouse monoclonal antibodies (mAbs that recognize epitopes located on heavy or light chain of chicken immunoglobulin Y (chIgY shared also by some other Phasianidae birds. The use of mAbs 1F5 and 2F10 that recognize heavy chain on chIgY common epitopes was demonstrated on immunoglobulins of turkey, pheasant and peafowl. Chicken IgY light chain specific mAb 3E10 revealed the presence of common epitopes on immunoglobulins of turkey, pheasant and sparrow. Monoclonal antibody clone 1F5/3G2 was used to prepare horseradish peroxidase (HRP conjugate and immunoadsorbent column. Conjugated mAbs were demonstrated to be excellent secondary antibodies for diagnostics of certain infections in different avian species. Since they do not react with mammalian immunoglobulins using our mAbs as secondary antibodies in human serodiagnostics would minimize background staining that appears when using mouse detection system. In dot immunobinding assay (DIBA and immunoblot assay they recognized specific IgY antibodies against Mycoplasma synoviae, Mycoplasma gallisepticum and Newcastle disease virus in sera of infected or vaccinated birds. Immunoadsorption as a method for removal of IgY from samples in which Mycoplasma synoviae specific IgY was predominant immunoglobulin class enabled more exact demonstration of specific IgA and IgM antibodies. Herein we are presenting effective mAbs useful in diagnostics of avian and mammalian infections as well as in final steps of detection and purification of chicken antibodies and their subunits produced in vivo or in vitro as polyclonal, monoclonal or recombinant antibodies.

Hen egg yolk antibodies (IgY, production and use for passive immunization against bacterial enteric infections in chicken: a review

Directory of Open Access Journals (Sweden)

Chalghoumi R.

2009-01-01

Full Text Available Enteric infections caused by Salmonella remain a major public health burden worldwide. Poultry, particularly chickens, are known to be the main reservoir for this zoonotic pathogen. Therefore, the prevention and monitoring of Salmonella infection during the live phase may greatly reduce the contamination of poultry meat during slaughter and processing. With the ban on sub-therapeutic antibiotic usage in Europe and the increasingly strictness of the European legislation on food hygiene, passive immunization by oral administration of pathogen-specific hen egg yolk antibody (IgY may be a useful and attractive alternative. This review offers summarized information about IgY production and the use of these antibodies for passive immunization, particularly in poultry.

Quality of electricity service: Evaluation of nuisance index (IGI) of industrial customers; Qualite du service electrique:evaluation de l`indice de gene individuel des clients industriels

Energy Technology Data Exchange (ETDEWEB)

Naggar, R. [Hydro-Quebec, Montreal, PQ (Canada)

1996-08-01

The effects of power interruption on individual industrial customers by computing an individual nuisance index (IGI) is one of the tools planned by Hydro-Quebec to measure quality of service to its customers. When fully functioning, IGI will represent a combined value of loss of sales, overtime, lost materials and other direct costs, each IGI tailor-made for a particular company. Data for computing the index will be obtained from Hydro-Quebec`s own customer classification database, plus a commercial technical database (DTC) containing data required for the assessment of the nuisance, and a survey carried out by Hydro-Quebec involving some 1600 industrial customers. As of this date, the DTC is not yet available. A statistical analysis of survey responses was substituted to provide default values based on available parameters. Hydro-Quebec is confident that this new approach to evaluating service quality will open new horizons in quality assurance. 3 refs., 5 tabs.

I.G.Y. Ascaplots annals of the international geophysical year, v.20

CERN Document Server

Stoffregen, W

Annals of the International Geophysical Year, Volume 20, Part II: I.G.Y. Ascaplots is a four-chapter text that provides the data on half-hourly auroral all-sky camera plots from 115 stations for the period 1958-1959. This period cover two winters in the northern hemisphere characterized by high auroral activity. This part also presents the list of stations, as well as the maps of the northern and southern distribution of all-sky cameras, with some modifications and additions to the earlier list. Data from the added Japanese station in the Antarctic are received and are included with the data

Effect of passive immunization by anti-gingipain IgY on periodontal health of dogs

Directory of Open Access Journals (Sweden)

Rahman A.K.M. Shofiqur

2011-09-01

Full Text Available Anti-gingipain IgY (IgY-GP, known as hyperimmune γ-livetin from egg yolk, inhibits the enzyme activity, growth and adherence of Porphyromonas gingivalis to gingival epithelial cells. Our objective was to evaluate the efficacy of IgY-GP on periodontal health of dogs. IgY-GP was prepared from the egg yolk of hens immunized with the gingipain from Porphyromonas gingivalis ATCC 33277. Two in vivo trial models were conducted on 15 adult dogs with periodontitis by giving IgY-GP-supplemented dog feed for 8 weeks and direct application of the IgY in dental ointment to the periodontal pockets at weekly interval for 4 weeks. Clinical parameters including gingivitis, periodontitis, oral health index, bleeding on probe (BOP, pocket depth (PD, and dental calculus removal pattern for selected premolar teeth were recorded at baseline, 4 and 8 weeks post treatment.IgY-GP showed strong cross-reactivity with gingipain from Porphyromonas gulae and inhibited the enzyme activity in vitro. In the dog trials, IgY-GP resulted in significant improvement of oral health parameters including gingivitis and periodontitis scores, BOP, dental calculus removal. No adverse events during and after antibody applications were noted. Oral immunotherapy by using IgY-GP is a new promising alternative to conventional preventive and therapeutic methods to improve oral health status in dogs.

Production and characterisation of a novel chicken IgY antibody raised against C-terminal peptide from human thymidine kinase 1.

Science.gov (United States)

Wu, Chuanjing; Yang, Rongjiang; Zhou, Ji; Bao, Shing; Zou, Li; Zhang, Pinggan; Mao, Yongrong; Wu, Jianping; He, Qimin

2003-06-01

Egg yolk is a good source of highly specific antibodies against mammalian antigens because of the phylogenetic distance between birds and mammals. Chicken egg yolk immunoglobulins (IgY) were generated to a synthetic 31-amino acid peptide from the C-terminal of human HeLa thymidine kinase 1 (TK1) enzyme. The anti-TK1 IgY antibody was purified using affinity chromatography against the 31-amino acid peptide. The purified antibody inhibited the catalytic activity of the TK1 enzyme in the CEM TK1(+) cells and recognized the 25-kDa subunit and tetrameric form of TK1, which has a pI value of 8.3. No immunoreaction was observed in CEM TK1(-) cells. Western blot of the serum TK1 (S-TK1) also showed that only a single band was found in the serum of patients with malignancies. No band was seen in healthy serum. Furthermore, dot blots and enhanced chemiluminescence (ECL) detection of S-TK1 performed on sera of preoperative patients with gastric cancer (GC) (n=31) and healthy controls (n=62) showed that the levels of S-TK1 in the sera of cancer patients were significantly different (Pstage cancer patients (four breast carcinomas, three hepatocarcinomas and four thyroid carcinomas) indicated that a strong staining of TK1 enzyme was found in the cytoplasm of malignant cells. No staining or weak staining was seen in normal tissues. We suggest that screening for TK1 using anti-TK1 IgY may be potentially useful for serological and immunohistochemical detection of TK1 as an early prognosis and for monitoring patients undergoing treatment.

Detection of Shiga toxin-producing Escherichia coli by sandwich enzyme-linked immunosorbent assay using chicken egg yolk IgY antibodies

Science.gov (United States)

Parma, Y. R.; Chacana, P. A.; Lucchesi, P. M. A.; Rogé, A.; Granobles Velandia, C. V.; Krüger, A.; Parma, A. E.; Fernández-Miyakawa, M. E.

2012-01-01

Enterohemorrhagic Escherichia coli (EHEC), a subset of Shiga toxin producing E. coli (STEC) is associated with a spectrum of diseases that includes diarrhea, hemorrhagic colitis and a life-threatening hemolytic-uremic syndrome (HUS). Regardless of serotype, Shiga toxins (Stx1 and/or Stx2) are uniformly expressed by all EHEC, and so exploitable targets for laboratory diagnosis of these pathogens. In this study, a sandwich ELISA for determination of Shiga toxin (Stx) was developed using anti-Stx2B subunit antibodies and its performance was compared with that of the Vero cell assay and a commercial immunoassay kit. Chicken IgY was used as capture antibody and a HRP-conjugated rabbit IgG as the detection antibody. The anti-Stx2B IgY was harvested from eggs laid by hens immunized with a recombinant protein fragment. Several parameters were tested in order to optimize the sandwich ELISA assay, including concentration of antibodies, type and concentration of blocking agent, and incubation temperatures. Supernatants from 42 STEC strains of different serotypes and stx variants, including stx2EDL933, stx2vha, stx2vhb, stx2g, stx1EDL933, and stx1d were tested. All Stx variants were detected by the sandwich ELISA, with a detection limit of 115 ng/ml Stx2. Twenty three strains negative for stx genes, including different bacteria species, showed no activity in Vero cell assay and produced negative results in ELISA, except for two strains. Our results show that anti-Stx2B IgY sandwich ELISA could be used in routine diagnosis as a rapid, specific and economic method for detection of Shiga toxin-producing E. coli. PMID:22919675

Grid: From EGEE to EGI and from INFN-Grid to IGI

International Nuclear Information System (INIS)

Giselli, A.; Mazzuccato, M.

2009-01-01

In the last fifteen years the approach of the computational Grid has changed the way to use computing resources. Grid computing has raised interest worldwide in academia, industry, and government with fast development cycles. Great efforts, huge funding and resources have been made available through national, regional and international initiatives aiming at providing Grid infrastructures, Grid core technologies, Grid middle ware and Grid applications. The Grid software layers reflect the architecture of the services developed so far by the most important European and international projects. In this paper Grid e-Infrastructure story is given, detailing European, Italian and international projects such as EGEE, INFN-Grid and NAREGI. In addition the sustainability issue in the long-term perspective is described providing plans by European and Italian communities with EGI and IGI.

Detection of Shiga toxin-producing Escherichia coli by sandwich enzyme-linked immunosorbent assay using chicken egg yolk IgY antibodies

Directory of Open Access Journals (Sweden)

Yanil R Parma

2012-06-01

Full Text Available Enterohemorrhagic Escherichia coli (EHEC, a subset of Shiga toxin producing E. coli (STEC is associated with a spectrum of diseases that includes diarrhea, hemorrhagic colitis and a life-threatening hemolytic uremic syndrome (HUS. Regardless of serotype, Shiga toxins (Stx1 and/or Stx2 are uniformly expressed by all EHEC, and so exploitable targets for laboratory diagnosis of these pathogens. In this study, a sandwich ELISA for determination of Shiga toxin (Stx was developed using anti-Stx2 B subunit antibodies and its performance was compared with that of the Vero cell assay and a commercial immunoassay kit. Chicken IgY was used as capture antibody and a HRP-conjugated rabbit IgG as the detection antibody. The anti-Stx2B IgY was harvested from eggs laid by hens immunized with a recombinant protein fragment. Several parameters were tested in order to optimize the sandwich ELISA assay, including concentration of antibodies, type and concentration of blocking agent, and incubation temperatures. Supernatants from 42 STEC strains of different serotypes and stx variants, including stx2EDL933, stx2vha, stx2vhb, stx2g, stx1EDL933 and stx1d were tested. All Stx variants were detected by the sandwich ELISA, with a detection limit of 400 ng /ml Stx2. Twenty three strains negative for stx genes, including different bacteria species, showed no activity in Vero cell assay and produced negative results in ELISA, except for 2 strains. Our results show that anti-Stx2B IgY sandwich ELISA could be used in routine diagnosis as a rapid, specific and economic method for detection of Shiga toxin-producing E. coli.

IgY Technology: Extraction of Chicken Antibodies from Egg Yolk by Polyethylene Glycol (PEG) Precipitation

OpenAIRE

Pauly, Diana; Chacana, Pablo A.; Calzado, Esteban G.; Brembs, Bj?rn; Schade, R?diger

2011-01-01

Hens can be immunized by means of i.m. vaccination (Musculus pectoralis, left and right, injection volume 0.5-1.0 ml) or by means of Gene-Gun plasmid-immunization. Dependent on the immunogenicity of the antigen, high antibody-titres (up to 1:100,000 - 1:1,000,000) can be achieved after only one or 3 - 4 boost immunizations. Normally, a hen lays eggs continuously for about 72 weeks, thereafter the laying capacity decreases. This protocol describes the extraction of total IgY from egg yolk b...

Development of IgY antibodies in chickens and IgG in rabbits immunized against proteins of Pythium insidiosum isolated from horses in the state of Rio de Janeiro Desenvolvimento de Anticorpos IgY em galinhas e IgG em coelhos imunizados contra proteínas de Pythium insidiosum isolado de equinos no Estado do Rio de Janeiro, Brasil

Directory of Open Access Journals (Sweden)

Maria Fabíola Nunes Rangel

2010-01-01

Full Text Available Pythiosis is caused by Pythium insidiosum and the occurrence of disease in horses was described in the North and Northwest State of Rio de Janeiro, Brazil. The disease was described in cattle, sheep, humans, and horses in different states and regions across the country. This paper describes the development of IgY and IgG polyclonal antibodies, in chicken and rabbits, respectively against proteins extracted from kunkers and hyphae of P. insidiosum from affected horses. The proteins were recognized by chicken, rabbit and horse antibodies by immunodiffusion and Western blot against majority bands of 27 and 43 KDa, and titrated by ELISA. The antibodies IgY developed by the first time against Brazilian strains of P. insidiosum may represent a valuable tool in the detection of antigens of the pathogen and contribute to further studies aimed at immunotherapy and knowledge about this disease in endemic areas in Rio de Janeiro and in Brazil.Pitiose é causada por Pythium insidiosum e a doença foi descrita em equinos no Norte e Noroeste do Estado do Rio de Janeiro, Brasil. A doença foi descrita em bovinos, ovelhas, humanos e cavalos em diferentes estados e regiões do país. Este trabalho descreve o desenvolvimento de anticorpos policlonais, IgY e IgG, em galinha e coelho, respectivamente, contra proteínas extraídas de kunkers e hifas de P. insidiosum de cavalos doentes. As proteínas foram reconhecidas por anticorpos de galinha, coelho e cavalos contra as bandas majoritárias de 27 e 34 KDa em imunodifusão e Western blot tituladas por ELISA. Os anticorpos IgY desenvolvidos pela primeira vez contra cepas brasileiras de P. insidiosum podem representar um valioso instrumento na detecção de antígenos de patógenos e contribuem para novos estudos baseados na imunoterapia e no entendimento sobre esta doença em áreas endêmicas no Rio de Janeiro e em todo o país.

Solar Cycle variations of ƒoF2 from IGY to 1990

Directory of Open Access Journals (Sweden)

M. K. Goel

Full Text Available Noontime monthly median values of F2-layer critical frequency foF2 (m for some ionospheric stations representing low- and mid-latitudes are examined for their dependence on solar activity for the years 1957 (IGY to 1990. This is the period for which ionospheric data in digital form is available in two CD-ROMs at the World Data Center, Boulder. It is observed that at mid-latitudes, foF2 (m shows nearly a linear relationship with R12 (the 12-month running average of the Zurich sunspot number, though this relation is nonlinear for low-latitudes. These results indicate some departures from the existing information often used in theoretical and applied areas of space research.Key words. Ionosphere (equatorial ionosphere; mid-latitude ionosphere; modelling and forecasting

Three IgH isotypes, IgM, IgA and IgY are expressed in Gentoo penguin and zebra finch

Science.gov (United States)

Han, Haitang; Zhao, Yaofeng; Pan, Qingjie; Ren, Liming

2017-01-01

Previous studies on a limited number of birds suggested that the IgD-encoding gene was absent in birds. However, one of our recent studies showed that the gene was definitely expressed in the ostrich and emu. Interestingly, we also identified subclass diversification of IgM and IgY in these two birds. To better understand immunoglobulin genes in birds, in this study, we analyzed the immunoglobulin heavy chain genes in the zebra finch (Taeniopygia guttata) and Gentoo penguin (Pygoscelis papua), belonging respectively to the order Passeriformes, the most successful bird order in terms of species diversity and numbers, and Sphenisciformes, a relatively primitive avian order. Similar to the results obtained in chickens and ducks, only three genes encoding immunoglobulin heavy chain isotypes, IgM, IgA and IgY, were identified in both species. Besides, we detected a transcript encoding a short membrane-bound IgA lacking the last two CH exons in the Gentoo penguin. We did not find any evidence supporting the presence of IgD gene or subclass diversification of IgM/IgY in penguin or zebra finch. The obtained data in our study provide more insights into the immunoglobulin heavy chain genes in birds and may help to better understand the evolution of immunoglobulin genes in tetrapods. PMID:28403146

Three IgH isotypes, IgM, IgA and IgY are expressed in Gentoo penguin and zebra finch.

Science.gov (United States)

Han, Binyue; Li, Yan; Han, Haitang; Zhao, Yaofeng; Pan, Qingjie; Ren, Liming

2017-01-01

Previous studies on a limited number of birds suggested that the IgD-encoding gene was absent in birds. However, one of our recent studies showed that the gene was definitely expressed in the ostrich and emu. Interestingly, we also identified subclass diversification of IgM and IgY in these two birds. To better understand immunoglobulin genes in birds, in this study, we analyzed the immunoglobulin heavy chain genes in the zebra finch (Taeniopygia guttata) and Gentoo penguin (Pygoscelis papua), belonging respectively to the order Passeriformes, the most successful bird order in terms of species diversity and numbers, and Sphenisciformes, a relatively primitive avian order. Similar to the results obtained in chickens and ducks, only three genes encoding immunoglobulin heavy chain isotypes, IgM, IgA and IgY, were identified in both species. Besides, we detected a transcript encoding a short membrane-bound IgA lacking the last two CH exons in the Gentoo penguin. We did not find any evidence supporting the presence of IgD gene or subclass diversification of IgM/IgY in penguin or zebra finch. The obtained data in our study provide more insights into the immunoglobulin heavy chain genes in birds and may help to better understand the evolution of immunoglobulin genes in tetrapods.

Three IgH isotypes, IgM, IgA and IgY are expressed in Gentoo penguin and zebra finch.

Directory of Open Access Journals (Sweden)

Binyue Han

Full Text Available Previous studies on a limited number of birds suggested that the IgD-encoding gene was absent in birds. However, one of our recent studies showed that the gene was definitely expressed in the ostrich and emu. Interestingly, we also identified subclass diversification of IgM and IgY in these two birds. To better understand immunoglobulin genes in birds, in this study, we analyzed the immunoglobulin heavy chain genes in the zebra finch (Taeniopygia guttata and Gentoo penguin (Pygoscelis papua, belonging respectively to the order Passeriformes, the most successful bird order in terms of species diversity and numbers, and Sphenisciformes, a relatively primitive avian order. Similar to the results obtained in chickens and ducks, only three genes encoding immunoglobulin heavy chain isotypes, IgM, IgA and IgY, were identified in both species. Besides, we detected a transcript encoding a short membrane-bound IgA lacking the last two CH exons in the Gentoo penguin. We did not find any evidence supporting the presence of IgD gene or subclass diversification of IgM/IgY in penguin or zebra finch. The obtained data in our study provide more insights into the immunoglobulin heavy chain genes in birds and may help to better understand the evolution of immunoglobulin genes in tetrapods.

Production and purification of avian antibodies (IgYs from inclusion bodies of a recombinant protein central in NAD+ metabolism

Directory of Open Access Journals (Sweden)

Paula A. Moreno-González

2013-08-01

Full Text Available The use of hens for the production of polyclonal antibodies reduces animal intervention and moreover yields a higher quantity of antibodies than other animal models.  The phylogenetic distance between bird and mammal antigens, often leads to more specific avian antibodies than their mammalian counterparts.Since a large amount of antigen is required for avian antibody production, the use of recombinant proteins for this procedure has been growing faster over the last years. Nevertheless, recombinant protein production through heterologous systems frequently prompts the protein to precipitate, forming insoluble aggregates of limited utility (inclusion bodies. A methodology for the production of avian polyclonal antibodies, using recombinant protein from inclusion bodies is presented in this article.In order to produce the antigen, a recombinant Nicotinamide mononucleotide adenylyltransferase from Giardia intestinalis (His-GiNMNAT was expressed in Escherichia coli.  The protein was purified through solubilization from inclusion bodies prior to its renaturalization.  Antibodies were purified from egg yolk of immunized hens by water dilution, followed by ammonium sulfate precipitation and thiophilic affinity chromatography.The purified antibodies were tested against His-GiNMNAT protein in Western blot essays. From one egg yolk, 14.4 mg of highly pure IgY were obtained; this antibody was able to detect 15ng of His-GiNMNAT.  IgY specificity was improved by means of antigen affinity purification, allowing its use for parasite protein recognition.

PURIFICACIÓN DE IgY CONTRA LA SUBUNIDAD NR3 DEL RECEPTOR NMDA DE CEREBRO DE RATA

Directory of Open Access Journals (Sweden)

Gina Méndez C

2008-04-01

Full Text Available Objetivo. Obtener anticuerpos tipo IgY contra péptidos sintéticos de las subunidades NR3A y NR3B del receptor NMDA de ratas, para reconocer y seguir la expresión de estas subunidades en extractos de cerebro de rata de diferentes edades. Materiales y métodos. Se diseñaron dos péptidos empleando los sistemas de la base de datos Entrez y el programa ClustalW-PBIL de alineamientos múltiples contra las subunidades NR3A y NR3B del receptor NMDA; una vez sintetizados por el método SSPS-fmoc fueron utilizados para inocular gallinas (Gallus gallus, variedad Hy Line Brown de 16 semanas de edad; al cabo de 57 días postinoculación se purificó IgY específica y se enfrentaron a extractos de cerebro de rata postnatal y adulta. Resultados. Se detectaron las subunidades NR3A y NR3B y se relacionó su expresión con la edad del animal; siendo mayor la expresión de la subunidad NR3A en extracto de cerebro de rata postnatal. No se encontró diferencia marcada en la expresión de la subunidad NR3B en las edades mencionadas. Conclusiones. Esta es la primera investigación que emplea proteína nativa para el reconocimiento de la subunidad NR3 del receptor NMDA, lo cual muestra la especificidad de los anticuerpos generados y contribuye con el entendimiento de las funciones de este receptor y su relación con la regulación de la memoria espacial.

Quantification of antibody (IgY) titers in hen eggs following immunization and their use in detecting cell surface molecules on nitrocellulose membranes.

Science.gov (United States)

Ruan, Guang-Ping; Ma, Li; Meng, Xiao-Jing; Meng, Min-Jie; Wang, Xiao-Ning; Lin, Ying; Wu, Zheng-Qiang; He, Xiao-Wei; Wang, Ju-Fang; Zhu, Yong

2007-01-01

HLA-A*0201 alpha chain and beta2m were expressed from a prokaryotic system, and after refolding and purification, the alpha chain and beta2m were used to immunize eight laying hens. The titer of egg yolk antibody against alpha chain increased from 10(2) to 10(5.3) The titer of egg yolk antibody against beta2m increased from 10(1) to 10(4.7). The extent of titer increase is similar between the two antigens. An average of 135 mg purified polyclonal antibody (IgY) can be easily obtained from one egg yolk. The use of egg collection rather than serum collection is compatible with modern animal protection regulations. An average of 28 eggs were obtained from a laying hen every month, with a total amount of 3780 mg immunoglobulin extracted from one immunized hen every month, which would be equivalent to 630 mL of serum or 1260 mL of blood per month. Chickens are an optimal host for the production of polyclonal antibodies with high titer and high yield. Purified IgY was labeled with horseradish peroxidase and reacted with PBMC on nitrocellulose membranes indicating that the antibody can bind to the native conformation of class I HLA molecule on PBMC.

Chicken Egg Yolk Antibodies (IgY) for Prophylaxis and Treatment of Rotavirus Diarrhea in Human and Animal Neonates: A Concise Review

OpenAIRE

Thu, Hlaing Myat; Myat, Theingi Win; Win, Mo Mo; Thant, Kyaw Zin; Rahman, Shofiqur; Umeda, Kouji; Nguyen, Sa Van; Icatlo, Faustino C.; Higo-Moriguchi, Kyoko; Taniguchi, Koki; Tsuji, Takao; Oguma, Keiji; Kim, Sang Jong; Bae, Hyun Suk; Choi, Hyuk Joon

2017-01-01

The rotavirus-induced diarrhea of human and animal neonates is a major public health concern worldwide. Until recently, no effective therapy is available to specifically inactivate the rotavirion particles within the gut. Passive immunotherapy by oral administration of chicken egg yolk antibody (IgY) has emerged of late as a fresh alternative strategy to control infectious diseases of the alimentary tract and has been applied in the treatment of diarrhea due to rotavirus infection. The purpos...

A trial with IgY chicken antibodies to eradicate faecal carriage of Klebsiella pneumoniae and Escherichia coli producing extended-spectrum beta-lactamases

OpenAIRE

Jonsson, Anna-Karin; Larsson, Anders; Tängdén, Thomas; Melhus, Åsa; Lannergård, Anders

2015-01-01

Background: Extended-spectrum beta-lactamase (ESBL)-producing Enterobacteriaceae is an emerging therapeutic challenge, especially in the treatment of urinary tract infections. Following an outbreak of CTX-M-15 Klebsiella pneumoniae in Uppsala, Sweden, an orphan drug trial on IgY chicken antibodies was undertaken in an attempt to eradicate faecal carriage of ESBL-producing K. pneumoniae and Escherichia coli.Methods: Hens were immunised with epitopes from freeze-dried, whole-cell bacteria (ESBL...

Hen egg yolk antibodies (IgY), production and use for passive immunization against bacterial enteric infections in chicken : a review

OpenAIRE

Chalghoumi, Raja; Beckers, Yves; Portetelle, Daniel; Thewis, André

2009-01-01

Les anticorps du jaune d’oeuf de poule (IgY), production et utilisation en immunisation passive contre les infections entériques bactériennes : une revue. Les infections entériques causées par Salmonella constituent un problème majeur de santé publique à travers le monde. Il est bien connu que la volaille, en particulier le poulet de chair, constitue le principal réservoir pour ce pathogène zoonotique. Par conséquent, la prévention et la surveillance de Salmonella au cours de la phase d’éleva...

Dorzolamide Loaded Niosomal Vesicles: Comparison of Passive and Remote Loading Methods.

Science.gov (United States)

Hashemi Dehaghi, Mohadeseh; Haeri, Azadeh; Keshvari, Hamid; Abbasian, Zahra; Dadashzadeh, Simin

2017-01-01

Glaucoma is a common progressive eye disorder and the treatment strategies will benefit from nanoparticulate delivery systems with high drug loading and sustained delivery of intraocular pressure lowering agents. Niosomes have been reported as a novel approach to improve drug low corneal penetration and bioavailability characteristics. Along with this, poor entrapment efficiency of hydrophilic drug in niosomal formulation remains as a major formulation challenge. Taking this perspective into consideration, dorzolamide niosomes were prepared employing two different loading methodologies (passive and remote loading methods) and the effects of various formulation variables (lipid to drug ratio, cholesterol percentage, drug concentration, freeze/thaw cycles, TPGS content, and external and internal buffer molarity and pH) on encapsulation efficiency were assessed. Encapsulation of dorzolamide within niosomes increased remarkably by the incorporation of higher cholesterol percentage as well as increasing the total lipid concentration. Remote loading method showed higher efficacy for drug entrapment compared to passive loading technique. Incorporation of TPGS in bilayer led to decrease in EE; however, retarded drug release rate. Scanning electron microscopy (SEM) studies confirmed homogeneous particle distribution, and spherical shape with smooth surface. In conclusion, the highest encapsulation can be obtained using phosphate gradient method and 50% cholesterol in Span 60 niosomal formulation.

PRODUCTION AND PURIFICATION OF IgY ANTIBODIES AS A NOVEL TOOL TO PURIFY THE NR1 SUBUNIT OF NMDA RECEPTO

Directory of Open Access Journals (Sweden)

Edgar Antonio Reyes Montaño

2011-12-01

Full Text Available Producing polyclonal antibodies (IgY inchickens has advantages over those obtainedin other animal models, since theyhave been used as a tool for studyingdifferent proteins (NMDA glutamate receptorin our case, specifically the NR1subunit. We produced specific antibodiesagainst expression products by thealternative splicing of the gene encodingNMDA receptor NR1 subunit in adult ratbrain. Three peptides corresponding tothe splicing sites (N1, C1 and C2’ cassetteswere designed, synthesised and usedindividually as antigens in hens. Specificimmunoglobulins were purified fromyolks. The antibodies were then used forpurifying the NMDA receptor NR1 subunitusing affinity chromatography couplingthe three antibodies to the support.R

Obtención de anticuerpos policlonales IgY antiparvovirus canino y evaluación en un sistema de aglutinación con látex

Directory of Open Access Journals (Sweden)

Jannet González-Figueredo

2015-12-01

Full Text Available La parvovirosis canina es una de las principales infecciones que provoca gastroenteritis, fundamentalmente en cachorros, con altos índices de morbiletalidad. Los diagnosticadores más utilizados se basan en la detección de partículas virales excretadas durante la fase aguda de la enfermedad. Algunos requieren equipos especializados, lo que aumenta los costos y el tiempo de diagnóstico. Por esto, la simplificación de estos métodos con alta sensibilidad y especificidad es prioritaria. En Cuba solo se logra un diagnóstico presuntivo sin la completa confirmación de la enfermedad, principalmente por la escasez o ausencia de un medio diagnóstico en toda la red de consultorios y clínicas veterinarias, rápido, eficaz y ajustable a nuestras condiciones. Este trabajo tuvo como objetivo obtener anticuerpos policlonales IgY a partir de yema de huevo de gallina y evaluarlos mediante un sistema de látex-aglutinación, para su posible uso como terapia y principalmente en el diagnóstico. Se inmunizaron por vía intramuscular dos gallinas de raza Leghorn con una cepa atenuada de parvovirus canino (PVC tipo 2. Se aplicaron 8 inoculaciones por ave cada 15 días. Se cosecharon los huevos y se purificaron los anticuerpos por el método de sulfato de dextrana/sulfato de sodio. Se determinó el título de IgY anti-PVC por el método de Inhibición de la Hemoaglutinación (IH y con antígeno de PVC acoplado a partículas de látex de poliestireno. Por IH se obtuvo un título de IgY anti-PVC de 1:1024. Las mezclas de anticuerpos con títulos alto y medio de ambas gallinas aglutinaron con los reactivos preparados con 230 y 460 µg/mL de antígeno. La mayor intensidad de la reacción y la mejor detectabilidad correspondieron a los reactivos elaborados con los anticuerpos de mayor título.

Detection of Clonorchis sinensis circulating antigen in sera from Chinese patients by immunomagnetic bead ELISA based on IgY.

Directory of Open Access Journals (Sweden)

Ge Nie

Full Text Available BACKGROUND: Clonorchiasis, caused by Clonorchis sinensis, is widely distributed in Southeast Asia including China. Clonorchiasis is included in control programs of neglected tropical diseases by World Health Organization (WHO because it is one of the major health problems in most endemic areas. Diagnosis of clonorchiasis plays a key role in the control programs. However, so far, there is no satisfactory method for clonorchiasis because of low sensitivity, poor practicality and high false positivity of available diagnostic tools. METHODOLOGY/PRINCIPAL FINDINGS: We developed an immunomagnetic bead enzyme-linked immunosorbent assay (ELISA based on IgY (egg yolk immunoglobulin against cysteine proteinase of C. sinensis for detection of circulating antigen in serum samples of patients infected with C. sinensis. The polyclonal IgY, coated with magnetic beads, was used as a capture antibody and a monoclonal IgG labeled with horseradish peroxidase as a detection antibody in the IgY-based immunomagnetic bead ELISA system (IgY-IMB-ELISA. The results showed that the sensitivity of IgY-IMB-ELISA was 93.3% (14 of 15 in cases of heavy infection (5000 to 9999 eggs per gram feces, i.e, EPG 5000-9999, 86.7% (13 of 15 in cases of moderate infection (EPG 1000-4999 and 75.0% (9 of 12 in cases of light infection (EPG <1000 of clonorchiasis. Together 36 of total 42 (85.7% serum samples of human clonorchiasis gave a positive reaction. There was a significant correlation between ELISA optical density and egg counts (EPG with a correlation coefficient of 0.83 in total 42 patients. There were no positive results in patients with trichinosis (n = 10 or cysticercosis (n = 10. Cross-reactivity was 6.7% (2 of 30 with schistosomiasis japonica and 10.0% (3 of 30 with paragonimiasis, respectively. No positive reaction was found in 20 healthy persons. CONCLUSIONS: Our findings suggest that IgY-IMB-ELISA appears to be a sensitive and specific assay for detection of circulating

Detection of Clonorchis sinensis circulating antigen in sera from Chinese patients by immunomagnetic bead ELISA based on IgY.

Science.gov (United States)

Nie, Ge; Wang, Ting; Lu, Shengjun; Liu, Wenqi; Li, Yonglong; Lei, Jiahui

2014-01-01

Clonorchiasis, caused by Clonorchis sinensis, is widely distributed in Southeast Asia including China. Clonorchiasis is included in control programs of neglected tropical diseases by World Health Organization (WHO) because it is one of the major health problems in most endemic areas. Diagnosis of clonorchiasis plays a key role in the control programs. However, so far, there is no satisfactory method for clonorchiasis because of low sensitivity, poor practicality and high false positivity of available diagnostic tools. We developed an immunomagnetic bead enzyme-linked immunosorbent assay (ELISA) based on IgY (egg yolk immunoglobulin) against cysteine proteinase of C. sinensis for detection of circulating antigen in serum samples of patients infected with C. sinensis. The polyclonal IgY, coated with magnetic beads, was used as a capture antibody and a monoclonal IgG labeled with horseradish peroxidase as a detection antibody in the IgY-based immunomagnetic bead ELISA system (IgY-IMB-ELISA). The results showed that the sensitivity of IgY-IMB-ELISA was 93.3% (14 of 15) in cases of heavy infection (5000 to 9999 eggs per gram feces, i.e, EPG 5000-9999), 86.7% (13 of 15) in cases of moderate infection (EPG 1000-4999) and 75.0% (9 of 12) in cases of light infection (EPG <1000) of clonorchiasis. Together 36 of total 42 (85.7%) serum samples of human clonorchiasis gave a positive reaction. There was a significant correlation between ELISA optical density and egg counts (EPG) with a correlation coefficient of 0.83 in total 42 patients. There were no positive results in patients with trichinosis (n = 10) or cysticercosis (n = 10). Cross-reactivity was 6.7% (2 of 30) with schistosomiasis japonica and 10.0% (3 of 30) with paragonimiasis, respectively. No positive reaction was found in 20 healthy persons. Our findings suggest that IgY-IMB-ELISA appears to be a sensitive and specific assay for detection of circulating antigen in human clonorchiasis.

A trial with IgY chicken antibodies to eradicate faecal carriage of Klebsiella pneumoniae and Escherichia coli producing extended-spectrum beta-lactamases

Directory of Open Access Journals (Sweden)

Anna-Karin Jonsson

2015-11-01

Full Text Available Background: Extended-spectrum beta-lactamase (ESBL-producing Enterobacteriaceae is an emerging therapeutic challenge, especially in the treatment of urinary tract infections. Following an outbreak of CTX-M-15 Klebsiella pneumoniae in Uppsala, Sweden, an orphan drug trial on IgY chicken antibodies was undertaken in an attempt to eradicate faecal carriage of ESBL-producing K. pneumoniae and Escherichia coli. Methods: Hens were immunised with epitopes from freeze-dried, whole-cell bacteria (ESBL-producing K. pneumoniae and E. coli and recombinant proteins of two K. pneumoniae fimbriae subunits (fimH and mrkD. The egg yolks were processed according to good manufacturing practice and the product was stored at−20°C until used. Using an internal database from the outbreak and the regular laboratory database, faecal carriers were identified and recruited from May 2005 to December 2013. The participants were randomised in a placebo-controlled 1:1 manner. Results: From 749 eligible patients, 327 (44% had deceased, and only 91 (12% were recruited and signed the informed consent. In the initial screening performed using the polymerase chain reaction, 24 participants were ESBL positive and subsequently randomised and treated with either the study drug or a placebo. The study was powered for 124 participants. Because of a very high dropout rate, the study was prematurely terminated. From the outbreak cohort (n=247, only eight patients were screened, and only one was positive with the outbreak strain in faeces. Conclusions: The present study design, using IgY chicken antibodies for the eradication of ESBL-producing K. pneumonia and E. coli, was ineffective in reaching its goal due to high mortality and other factors resulting in a low inclusion rate. Spontaneous eradication of ESBL-producing bacteria was frequently observed in recruited participants, which is consistent with previous reports.

A trial with IgY chicken antibodies to eradicate faecal carriage of Klebsiella pneumoniae and Escherichia coli producing extended-spectrum beta-lactamases

Science.gov (United States)

Jonsson, Anna-Karin; Larsson, Anders; Tängdén, Thomas; Melhus, Åsa; Lannergård, Anders

2015-01-01

Background Extended-spectrum beta-lactamase (ESBL)-producing Enterobacteriaceae is an emerging therapeutic challenge, especially in the treatment of urinary tract infections. Following an outbreak of CTX-M-15 Klebsiella pneumoniae in Uppsala, Sweden, an orphan drug trial on IgY chicken antibodies was undertaken in an attempt to eradicate faecal carriage of ESBL-producing K. pneumoniae and Escherichia coli. Methods Hens were immunised with epitopes from freeze-dried, whole-cell bacteria (ESBL-producing K. pneumoniae and E. coli) and recombinant proteins of two K. pneumoniae fimbriae subunits (fimH and mrkD). The egg yolks were processed according to good manufacturing practice and the product was stored at−20°C until used. Using an internal database from the outbreak and the regular laboratory database, faecal carriers were identified and recruited from May 2005 to December 2013. The participants were randomised in a placebo-controlled 1:1 manner. Results From 749 eligible patients, 327 (44%) had deceased, and only 91 (12%) were recruited and signed the informed consent. In the initial screening performed using the polymerase chain reaction, 24 participants were ESBL positive and subsequently randomised and treated with either the study drug or a placebo. The study was powered for 124 participants. Because of a very high dropout rate, the study was prematurely terminated. From the outbreak cohort (n=247), only eight patients were screened, and only one was positive with the outbreak strain in faeces. Conclusions The present study design, using IgY chicken antibodies for the eradication of ESBL-producing K. pneumonia and E. coli, was ineffective in reaching its goal due to high mortality and other factors resulting in a low inclusion rate. Spontaneous eradication of ESBL-producing bacteria was frequently observed in recruited participants, which is consistent with previous reports. PMID:26560861

Anti-HER2 IgY antibody-functionalized single-walled carbon nanotubes for detection and selective destruction of breast cancer cells

Directory of Open Access Journals (Sweden)

Mitra Somenath

2009-10-01

Full Text Available Abstract Background Nanocarrier-based antibody targeting is a promising modality in therapeutic and diagnostic oncology. Single-walled carbon nanotubes (SWNTs exhibit two unique optical properties that can be exploited for these applications, strong Raman signal for cancer cell detection and near-infrared (NIR absorbance for selective photothermal ablation of tumors. In the present study, we constructed a HER2 IgY-SWNT complex and demonstrated its dual functionality for both detection and selective destruction of cancer cells in an in vitro model consisting of HER2-expressing SK-BR-3 cells and HER2-negative MCF-7 cells. Methods The complex was constructed by covalently conjugating carboxylated SWNTs with anti-HER2 chicken IgY antibody, which is more specific and sensitive than mammalian IgGs. Raman signals were recorded on Raman spectrometers with a laser excitation at 785 nm. NIR irradiation was performed using a diode laser system, and cells with or without nanotube treatment were irradiated by 808 nm laser at 5 W/cm2 for 2 min. Cell viability was examined by the calcein AM/ethidium homodimer-1 (EthD-1 staining. Results Using a Raman optical microscope, we found the Raman signal collected at single-cell level from the complex-treated SK-BR-3 cells was significantly greater than that from various control cells. NIR irradiation selectively destroyed the complex-targeted breast cancer cells without harming receptor-free cells. The cell death was effectuated without the need of internalization of SWNTs by the cancer cells, a finding that has not been reported previously. Conclusion We have demonstrated that the HER2 IgY-SWNT complex specifically targeted HER2-expressing SK-BR-3 cells but not receptor-negative MCF-7 cells. The complex can be potentially used for both detection and selective photothermal ablation of receptor-positive breast cancer cells without the need of internalization by the cells. Thus, the unique intrinsic properties of SWNTs

Anti-HER2 IgY antibody-functionalized single-walled carbon nanotubes for detection and selective destruction of breast cancer cells

International Nuclear Information System (INIS)

Xiao, Yan; Savla, Ronak; Wagner, Paul D; Srivastava, Sudhir; He, Huixin; Gao, Xiugong; Taratula, Oleh; Treado, Stephen; Urbas, Aaron; Holbrook, R David; Cavicchi, Richard E; Avedisian, C Thomas; Mitra, Somenath

2009-01-01

Nanocarrier-based antibody targeting is a promising modality in therapeutic and diagnostic oncology. Single-walled carbon nanotubes (SWNTs) exhibit two unique optical properties that can be exploited for these applications, strong Raman signal for cancer cell detection and near-infrared (NIR) absorbance for selective photothermal ablation of tumors. In the present study, we constructed a HER2 IgY-SWNT complex and demonstrated its dual functionality for both detection and selective destruction of cancer cells in an in vitro model consisting of HER2-expressing SK-BR-3 cells and HER2-negative MCF-7 cells. The complex was constructed by covalently conjugating carboxylated SWNTs with anti-HER2 chicken IgY antibody, which is more specific and sensitive than mammalian IgGs. Raman signals were recorded on Raman spectrometers with a laser excitation at 785 nm. NIR irradiation was performed using a diode laser system, and cells with or without nanotube treatment were irradiated by 808 nm laser at 5 W/cm 2 for 2 min. Cell viability was examined by the calcein AM/ethidium homodimer-1 (EthD-1) staining. Using a Raman optical microscope, we found the Raman signal collected at single-cell level from the complex-treated SK-BR-3 cells was significantly greater than that from various control cells. NIR irradiation selectively destroyed the complex-targeted breast cancer cells without harming receptor-free cells. The cell death was effectuated without the need of internalization of SWNTs by the cancer cells, a finding that has not been reported previously. We have demonstrated that the HER2 IgY-SWNT complex specifically targeted HER2-expressing SK-BR-3 cells but not receptor-negative MCF-7 cells. The complex can be potentially used for both detection and selective photothermal ablation of receptor-positive breast cancer cells without the need of internalization by the cells. Thus, the unique intrinsic properties of SWNTs combined with high specificity and sensitivity of IgY

Solving Problems with the Percentage Bar

Science.gov (United States)

van Galen, Frans; van Eerde, Dolly

2013-01-01

At the end of primary school all children more of less know what a percentage is, but yet they often struggle with percentage problems. This article describes a study in which students of 13 and 14 years old were given a written test with percentage problems and a week later were interviewed about the way they solved some of these problems. In a…

Study of Acoustic Emission and Mechanical Characteristics of Coal Samples under Different Loading Rates

Directory of Open Access Journals (Sweden)

Huamin Li

2015-01-01

Full Text Available To study the effect of loading rate on mechanical properties and acoustic emission characteristics of coal samples, collected from Sanjiaohe Colliery, the uniaxial compression tests are carried out under various levels of loading rates, including 0.001 mm/s, 0.002 mm/s, and 0.005 mm/s, respectively, using AE-win E1.86 acoustic emission instrument and RMT-150C rock mechanics test system. The results indicate that the loading rate has a strong impact on peak stress and peak strain of coal samples, but the effect of loading rate on elasticity modulus of coal samples is relatively small. When the loading rate increases from 0.001 mm/s to 0.002 mm/s, the peak stress increases from 22.67 MPa to 24.99 MPa, the incremental percentage is 10.23%, and under the same condition the peak strain increases from 0.006191 to 0.007411 and the incremental percentage is 19.71%. Similarly, when the loading rate increases from 0.002 mm/s to 0.005 mm/s, the peak stress increases from 24.99 MPa to 28.01 MPa, the incremental percentage is 12.08%, the peak strain increases from 0.007411 to 0.008203, and the incremental percentage is 10.69%. The relationship between acoustic emission and loading rate presents a positive correlation, and the negative correlation relation has been determined between acoustic emission cumulative counts and loading rate during the rupture process of coal samples.

Kalman-fuzzy algorithm in short term load forecasting

International Nuclear Information System (INIS)

Shah Baki, S.R.; Saibon, H.; Lo, K.L.

1996-01-01

A combination of Kalman-Fuzzy-Neural is developed to forecast the next 24 hours load. The input data fed to neural network are presented with training data set composed of historical load data, weather, day of the week, month of the year and holidays. The load data is fed through Kalman-Fuzzy filter before being applied to Neural Network for training. With this techniques Neural Network converges faster and the mean percentage error of predicted load is reduced as compared to the classical ANN technique

Percentage Energy from Fat Screener: Overview

Science.gov (United States)

A short assessment instrument to estimate an individual's usual intake of percentage energy from fat. The foods asked about on the instrument were selected because they were the most important predictors of variability in percentage energy.

Hypersensitive detection and quantitation of BoNT/A by IgY antibody against substrate linear-peptide.

Directory of Open Access Journals (Sweden)

Tao Li

Full Text Available Botulinum neurotoxin A (BoNT/A, the most acutely poisonous substance to humans known, cleave its SNAP-25 substrate with high specificity. Based on the endopeptidase activity, different methods have been developed to detect BoNT/A, but most lack ideal reproducibility or sensitivity, or suffer from long-term or unwanted interferences. In this study, we developed a simple method to detect and quantitate trace amounts of botulinum neurotoxin A using the IgY antibody against a linear-peptide substrate. The effects of reaction buffer, time, and temperature were analyzed and optimized. When the optimized assay was used to detect BoNT/A, the limit of detection of the assay was 0.01 mouse LD50 (0.04 pg, and the limit of quantitation was 0.12 mouse LD50/ml (0.48 pg. The findings also showed favorable specificity of detecting BoNT/A. When used to detect BoNT/A in milk or human serum, the proposed assay exhibited good quantitative accuracy (88% < recovery < 111%; inter- and intra-assay CVs < 18%. This method of detection took less than 3 h to complete, indicating that it can be a valuable method of detecting BoNT/A in food or clinical diagnosis.

Making Sense of Fractions and Percentages

Science.gov (United States)

Whitin, David J.; Whitin, Phyllis

2012-01-01

Because fractions and percentages can be difficult for children to grasp, connecting them whenever possible is beneficial. Linking them can foster representational fluency as children simultaneously see the part-whole relationship expressed numerically (as a fraction and as a percentage) and visually (as a pie chart). NCTM advocates these…

Effect of Natural Sand Percentages on Fatigue Life of Asphalt Concrete Mixture

Directory of Open Access Journals (Sweden)

Nahla Yassub Ahmed

2016-03-01

Full Text Available The design of a flexible pavement requires the knowledge of the material properties which are characterized by stiffness and fatigue resistance. The fatigue resistance relates the number of load cycles to failure with the strain level applied to the asphalt mixture. The main objective of this research is the evaluation of the fatigue life of asphalt mixtures by using two types of fine aggregate having different percentages. In this study, two types of fine aggregate were used natural sand (desert sand and crushed sand. The crushed sand was replaced by natural sand (desert sand with different percentages (0%, 25%, 75% and 100% by the weight of the sand (passing sieve No.8 and retained on sieve No.200 and one type of binder (40/50 penetration from Al-Daurah refinery. The samples of beams were tested by four point bending beam fatigue test at the control strain mode (250, 500 and 750 microstrain while the loading frequency (5Hz and testing temperature (20oC according to (AASHTO T321. The experimental work showed that fatigue life (Nf and initial flexural stiffness increased when control strain decreased for asphalt mixtures. Acceptable fatigue life at 750 microstrain was obtained with asphalt concrete mixtures containing 100% crushed sand as well as asphalt concrete contained 25% natural sand. The asphalt concrete contained 100% and 75% of natural sand exhibited high fatigue life at low level of microstrain (250. The main conclusion of this study found that best proportion of natural sand to be added to an asphaltic concrete mixture is falling within the range (0% and 25% by weight of fraction (passing No.8 and retained on No.200 sieve .

Passive Immune-Protection of Litopenaeus vannamei against Vibrio harveyi and Vibrio parahaemolyticus Infections with Anti-Vibrio Egg Yolk (IgY-Encapsulated Feed

Directory of Open Access Journals (Sweden)

Xiaojian Gao

2016-05-01

Full Text Available Vibrio spp. are major causes of mortality in white shrimp (Litopenaeus vannamei which is lacking adaptive immunity. Passive immunization with a specific egg yolk antibody (IgY is a potential method for the protection of shrimp against vibriosis. In this study, immune effects of the specific egg yolk powders (IgY against both V. harveyi and V. parahaemolyticus on white shrimp were evaluated. The egg yolk powders against V. harveyi and V. parahaemolyticus for passive immunization of white shrimp were prepared, while a tube agglutination assay and an indirect enzyme-linked immunosorbent assay (ELISA were used for detection of IgY titer. Anti-Vibrio egg yolk was encapsulated by β-cyclodextrin, which could keep the activity of the antibody in the gastrointestinal tract of shrimp. The results showed that the anti-Vibrio egg powders had an inhibiting effect on V. harveyi and V. parahaemolyticus in vitro. Lower mortality of infected zoeae, mysis, and postlarva was observed in groups fed with anti-Vibrio egg powders, compared with those fed with normal egg powders. The bacterial load in postlarva fed with specific egg powders in seeding ponds was significantly lower than those fed with normal egg powders in seeding ponds. These results show that passive immunization by oral administration with specific egg yolk powders (IgY may provide a valuable protection of vibrio infections in white shrimp.

Kinetika Immunoglobulin Kuning Telur Antiparvovirus Anjing Pada Anjing (KINETICS OF ANTICANINE PARVOVIRUS YOLK IMMUNOGLOBULIN IN DOGS

Directory of Open Access Journals (Sweden)

I Gusti Ayu Agung Suartini

2016-07-01

Full Text Available Kinetic study on Anti CPV IgY has been performed on six dogs aged 5-10 months. The IgY was injectedintravenously at dose of 21.4mg /10kg body weight. IgY levels in the blood were determined by ELISA. Aresearch was conducted to find out the kinetics of Anti CPV IgY in dogs blood. The kinetics of IgY wascalculated by using regression analysis to determine the association on the levels of IgY in serum againsttime at injection. The results showed that kinetic parameters were calculated based on first order kinetics.The constant elimination rate of IgY was at the range between 0.007 to 0.015 / h. IgY concentration in thedogs blood was from 0.746 to 0.992 mg / mL. The half-life of IgY was from 1.65 to 4.01 / d. Volumedistribution of IgY was between 21.47 to 28,55 / mL. Total IgY in the dog bodies (AUC was from 42,60 to142,00 mg / mL.h. The duration of the IgY in the dog’s body was 3.08 to 8.51 days. Clearance time of IgY was0.15 to 0.50 mL / h. In conclusion the kinetics of anti CPV IgY in dog’s body follow one compartment andfirst order model, which are only distributed in the blood with the half-life at 2.5 days, and IgY has lesspossibility to accumulate in the body compared to the IgG.

An innovative biocatalyst for production of ethanol from xylose in a continuous bioreactor.

Science.gov (United States)

Silva, C R; Zangirolami, T C; Rodrigues, J P; Matugi, K; Giordano, R C; Giordano, R L C

2012-01-05

The use of the hemicellulose fraction of biomass may be important for the feasibility of the production of second generation bioethanol. Wild strains of Saccharomyces cerevisiae are widely used in industry for production of 1st generation ethanol, and the robustness of this yeast is an important advantage in large scale applications. Isomerization of xylose to xylulose is an essential step in this process. This reaction is catalyzed by glucose isomerase (GI). A new biocatalyst is presented here for the simultaneous isomerization and fermentation (SIF) of xylose. GI from Streptomyces rubiginosus was immobilized in chitosan, through crosslinking with glutaraldehyde, and the support containing the immobilized GI (IGI-Ch) was co-immobilized with S. cerevisiae, in calcium alginate gel. The immobilization experiments led to high immobilized protein loads (30-68 mg × g(support)(-1)), high yields (circa of 100%) and high recovered enzyme activity (>90%). The IGI-Ch derivative with maximum activity presented 1700 IU × g(catalyst)(-1), almost twice the activity of a commercial immobilized GI, GENSWEET(®) IGI-HF. At typical operational conditions for xylose SIF operation (pH 5, 30-35 °C, presence of nutrients and ethanol concentrations in the medium up to 70 L(-1)), both derivatives, IGI-Ch and GENSWEET(®) IGI-HF retained app. 90% of the initial activity after 120 h, while soluble GI was almost completely inactive at pH 5, 30 °C. The isomerization xylose/xylulose, catalyzed by IGI-Ch, reached the equilibrium in batch experiments after 4h, with 12,000 IU × L(-1) (7 g(der) × L(-1)), at pH 5 and 30 °C, in the presence of fermentation nutrients. After co-immobilization of IGI-Ch with yeast in alginate gel, this biocatalyst succeeded in producing 12 g × L(-1) of ethanol, 9.5 g × L(-1) of xylitol, 2.5 g × L(-1) of glycerol and 1.9 g × L(-1) of acetate after consumption of 50 g × L(-1) of xylose, in 48 h, using 32.5 × 10(3) IU × L(-1) and 20 g(yeast) × L(-1), at 35

Correlation between live attenuated measles viral load and growth inhibition percentage in non-small cell lung cancer cell line

Directory of Open Access Journals (Sweden)

Rasha Fadhel Obaid

2018-03-01

Conclusion Live attenuated measles virus strain induced cytotoxic effect against human lung cancer cell line (A549 by induction of apoptosis as an important mechanism of anti-tumor activity, in addition, it indicates a correlation between the quantity of MV genomesand percentage of growth inhibition. This relation  has proved that measles virus had anticancer effect.

PREDICTED PERCENTAGE DISSATISFIED (PPD) MODEL ...

African Journals Online (AJOL)

HOD

their low power requirements, are relatively cheap and are environment friendly. ... PREDICTED PERCENTAGE DISSATISFIED MODEL EVALUATION OF EVAPORATIVE COOLING ... The performance of direct evaporative coolers is a.

Mean and peak wind load reduction on heliostats

Energy Technology Data Exchange (ETDEWEB)

Peterka, J.A.; Tan, L.; Bienkiewcz, B.; Cermak, J.E.

1987-09-01

This report presents the results of wind-tunnel tests supported through the Solar Energy Research Institute (SERI) by the Office of Solar Thermal Technology of the US Department of Energy as part of the SERI research effort on innovative concentrators. As gravity loads on drive mechanisms are reduced through stretched-membrane technology, the wind-load contribution of the required drive capacity increases in percentage. Reduction of wind loads can provide economy in support structure and heliostat drive. Wind-tunnel tests have been directed at finding methods to reduce wind loads on heliostats. The tests investigated both mean and peak forces, and moments. A significant increase in ability to predict heliostat wind loads and their reduction within a heliostat field was achieved. In addition, a preliminary review of wind loads on parabolic dish collectors was conducted, resulting in a recommended research program for these type collectors. 42 refs., 38 figs., 1 tab.

Percentage of Fast-Track Receipts

Data.gov (United States)

Social Security Administration — The dataset provides the percentage of fast-track receipts by state during the reporting fiscal year. Fast-tracked cases consist of those cases identified as Quick...

Chicken IgY Fc linked to Bordetella avium ompA and Taishan Pinus massoniana pollen polysaccharide adjuvant enhances macrophage function and specific immune responses

Directory of Open Access Journals (Sweden)

Zhu Ruiliang

2016-11-01

Full Text Available Fc-fusion technologies, in which immunoglobulin Fc is genetically fused to an antigenic protein, have been developed to confer antibody-like properties to proteins and peptides. Mammalian IgG Fc fusion exhibits improved antigen-induced immune responses by providing aggregates with high avidity for the IgG Fc receptor and salvaging the antigenic portion from endosomal degradation. However, whether the linked chicken IgY Fc fragment shares similar characteristics to mammalian IgG Fc remains unclear. In this study, we linked the chicken IgY Fc gene to the outer membrane protein A (ompA of Borderella avium through overlapping PCR. The fusion gene was cloned into the pPIC9 plasmid to construct the recombinant Pichia pastoris transformant expressing the ompA–Fc fusion protein. The effects of the linked Fc on macrophage vitality, activity, efficiency of antigen processing, and immune responses induced by the fused ompA were investigated. Furthermore, the effect of Taishan Pinus massoniana pollen polysaccharide (TPPPS, an immunomodulator, on chicken macrophage activation was evaluated. TPPPS was also used as an adjuvant to investigate its immunomodulatory effect on immunoresponses induced by the fused ompA–Fc in chickens. The pinocytosis, phagocytosis, secretion of nitric oxide and TNF-α, and MHC-II molecular expression of the macrophages treated with the fused ompA–Fc were significantly higher than those of the macrophages treated with ompA alone. The addition of TPPPS to the fused ompA–Fc further enhanced macrophage functions. The fused ompA–Fc elicited higher antigen-specific immune responses and protective efficacy compared with ompA alone. Moreover, the fused ompA–Fc conferred higher serum antibody titers, serum IL-2 and IL-4 concentrations, CD4+ and CD8+ T-lymphocyte counts, lymphocyte transformation rate, and protection rate compared with ompA alone. Notably, the prepared TPPPS adjuvant ompA–Fc vaccines induced high immune

Effect drug loading process on dissolution mechanism of encapsulated amoxicillin trihydrate in hydrogel semi-IPN chitosan methyl cellulose with pore forming agent KHCO3 as a floating drug delivery system

Science.gov (United States)

Fithawati, Garnis; Budianto, Emil

2018-04-01

Common treatment for Helicobacter pylori by repeated oral consumption of amoxicillin trihydrate is not effective. Amoxicillin trihydrate has a very short residence time in stomach which leads into its ineffectiveness. Residence time of amoxicillin trihydrate can be improved by encapsulating amoxicillin trihydrate into a floating drug delivery system. In this study, amoxicillin trihydrate is encapsulated into hydrogel semi-IPN chitosan methyl cellulose matrix as a floating drug delivery system and then treated with 20% KHCO3 as pore forming agent. Drug loading process used are in-situ loading and post loading. In-situ loading process has higher efficiency percentage and dissolution percentage than post loading process. In-situ loading process resulted 100% efficiency with 92,70% dissolution percentage. Post loading process resulted 98,7% efficiency with 90,42% dissolution percentage. Mechanism of drug dissolution study by kinetics approach showed both in-situ loading process and post loading process are diffusion and degradation process (n=0,4913) and (n=0,4602) respectively. These results are supported by characterization data from optical microscope and scanning electron microscopy (SEM). Data from optical microscope showed both loading process resulted in coarser hydrogel surface. Characterization using SEM showed elongated pores in both loading process after dissolution test.

Maximizing percentage depletion in solid minerals

International Nuclear Information System (INIS)

Tripp, J.; Grove, H.D.; McGrath, M.

1982-01-01

This article develops a strategy for maximizing percentage depletion deductions when extracting uranium or other solid minerals. The goal is to avoid losing percentage depletion deductions by staying below the 50% limitation on taxable income from the property. The article is divided into two major sections. The first section is comprised of depletion calculations that illustrate the problem and corresponding solutions. The last section deals with the feasibility of applying the strategy and complying with the Internal Revenue Code and appropriate regulations. Three separate strategies or appropriate situations are developed and illustrated. 13 references, 3 figures, 7 tables

Drug Loading of Mesoporous Silicon

Science.gov (United States)

Moffitt, Anne; Coffer, Jeff; Wang, Mengjia

2011-03-01

The nanostructuring of crystalline solids with low aqueous solubilities by their incorporation into mesoporous host materials is one route to improve the bioavailability of such solids. Earlier studies suggest that mesoporous Si (PSi), with pore widths in the range of 5-50 nm, is a candidate for such an approach. In this presentation, we describe efforts to load curcumin into free-standing microparticles of PSi. Curcumin is a compound extracted from turmeric root, which is an ingredient of curry. Curucmin has shown activity against selected cancer cell lines, bacteria, and other medical conditions. However, curcumin has a very low bioavailability due to its extremely low water solubility (0.6 μ g/mL). Incorporation of curcumin was achieved by straightforward loading of the molten solid at 185circ; C. Loading experiments were performed using PSi particles of two different size ranges, 45-75 μ m and 150-250 μ m. Longer loading times and ratio of curcumin to PSi leads to a higher percentage of loaded curcumin in both PSi particle sizes (as determined by weight difference). The extent of curcumin crystallinity was assessed by x-ray diffraction (XRD). The solubility and release kinetics of loaded curcumin from the PSi was determined by extraction into water at 37circ; C, with analysis using UV-VIS spectrometry. NSF-REU and TCU.

7 CFR 982.41 - Free and restricted percentages.

Science.gov (United States)

2010-01-01

... percentages in effect at the end of the previous marketing year shall be applicable. [51 FR 29548, Aug. 19... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... WASHINGTON Order Regulating Handling Marketing Policy § 982.41 Free and restricted percentages. The free and...

Mass spectrometry characterization for N-glycosylation of immunoglobulin Y from hen egg yolk.

Science.gov (United States)

Sheng, Long; He, Zhenjiao; Liu, Yaping; Ma, Meihu; Cai, Zhaoxia

2018-03-01

Immunoglobulin Y (IgY) is a new therapeutic antibody that exists in hen egg yolk. It is a glycoprotein, not much is known about its N-glycan structures, site occupancy and site-specific N-glycosylation. In this study, purified protein from hen egg yolk was identified as IgY based on SDS-PAGE and MALDI-TOF/TOF MS. N-glycan was released from IgY using peptide-N4-(N-acetyl-beta-glucosaminyl) asparagine-amidase treatment, and the molecular weight of IgY was calculated using the difference between the molecular weight of IgY and deglycosylated IgY. Two potential N-Glycosylation sites (ASN 308 and ASN 409 ) were detected on IgY by nanoLC-ESI MS. Sugar chains were separated using normal phase liquid chromatography after fluorescence labeling, and 17 N-glycan structures were confirmed using ESI-MS. The sugar chain pattern contained high-mannose oligosaccharide, hybrid oligosaccharide and complex oligosaccharide. These results could lead to other important information regarding IgY glycosylation. Copyright © 2017 Elsevier B.V. All rights reserved.

78 FR 33757 - Rural Determination and Financing Percentage

Science.gov (United States)

2013-06-05

... Agency for determining what percentage of a project is eligible for RUS financing if the Rural Percentage... defined as rural. As the Agency investigates financing options for projects owned by entities other than... inability to fund 100 percent of the financing needs of a given project has undermined the Agency's effort...

Short-Term Load Forecast in Electric Energy System in Bulgaria

Directory of Open Access Journals (Sweden)

Irina Asenova

2010-01-01

Full Text Available As the accuracy of the electricity load forecast is crucial in providing better cost effective risk management plans, this paper proposes a Short Term Electricity Load Forecast (STLF model with high forecasting accuracy. Two kind of neural networks, Multilayer Perceptron network model and Radial Basis Function network model, are presented and compared using the mean absolute percentage error. The data used in the models are electricity load historical data. Even though the very good performance of the used model for the load data, weather parameters, especially the temperature, take important part for the energy predicting which is taken into account in this paper. A comparative evaluation between a traditional statistical method and artificial neural networks is presented.

Specific egg yolk immunoglobulin as a new preventive approach for Shiga-toxin-mediated diseases.

Directory of Open Access Journals (Sweden)

Paola Neri

Full Text Available Shiga toxins (Stxs are involved in the development of severe systemic complications associated with enterohemorrhagic Escherichia coli (EHEC infection. Various neutralizing agents against Stxs are under investigation for management of EHEC infection. In this study, we immunized chickens with formalin-inactivated Stx-1 or Stx-2, and obtained immunoglobulin Y (IgY from the egg yolk. Anti-Stx-1 IgY and anti-Stx-2 IgY recognized the corresponding Stx A subunit and polymeric but not monomeric B subunit. Anti-Stx-1 IgY and anti-Stx-2 IgY suppressed the cytotoxicity of Stx-1 and Stx-2 to HeLa 229 cells, without cross-suppressive activity. The suppressive activity of these IgY was abrogated by pre-incubation with the corresponding recombinant B subunit, which suggests that the antibodies directed to the polymeric B subunits were predominantly involved in the suppression. In vivo, the intraperitoneal or intravenous administration of these IgY rescued mice from death caused by intraperitoneal injection of the corresponding toxin at a lethal dose. Moreover, oral administration of anti-Stx-2 IgY reduced the mortality of mice infected intestinally with EHEC O157:H7. Our results therefore suggest that anti-Stx IgY antibodies may be considered as preventive agents for Stx-mediated diseases in EHEC infection.

Assessing and Reducing Miscellaneous Electric Loads (MELs) in Banks

Energy Technology Data Exchange (ETDEWEB)

Rauch, Emily M.

2012-09-01

Miscellaneous electric loads (MELs) are loads outside of a building's core functions of heating, ventilating, air conditioning, lighting, and water heating. MELs are a large percentage of total building energy loads. This report reviews methods for reducing MELs in Banks. Reducing MELs in a bank setting requires both local and corporate action. Corporate action centers on activities to prioritize and allocate the right resources to correct procurement and central control issues. Local action includes branch assessment or audits to identify specific loads and needs. The worksheet at the end of this guide can help with cataloging needed information and estimating savings potential. The following steps provide a guide to MEL reductions in Bank Branches. The general process has been adapted from a process developed for office buildings the National Renewable Energy Laboratory (NREL, 2011).

Percentage Retail Mark-Ups

OpenAIRE

Thomas von Ungern-Sternberg

1999-01-01

A common assumption in the literature on the double marginalization problem is that the retailer can set his mark-up only in the second stage of the game after the producer has moved. To the extent that the sequence of moves is designed to reflect the relative bargaining power of the two parties it is just as plausible to let the retailer move first. Furthermore, retailers frequently calculate their selling prices by adding a percentage mark-up to their wholesale prices. This allows a retaile...

Bone-Implant Contact around Crestal and Subcrestal Dental Implants Submitted to Immediate and Conventional Loading

Directory of Open Access Journals (Sweden)

Ana Emília Farias Pontes

2014-01-01

Full Text Available The present study aims to evaluate the influence of apicocoronal position and immediate and conventional loading in the percentage of bone-implant contact (BIC. Thus, 36 implants were inserted in the edentulous mandible from six dogs. Three implants were installed in each hemimandible, in different positions in relation to the ridge: Bone Level (at crestal bone level, Minus 1 (one millimeter apical to crestal bone, and Minus 2 (two millimeters apical to crestal bone. In addition, each hemimandible was submitted to a loading protocol: immediate (prosthesis installed 24 hours after implantation or conventional (prosthesis installed 120 days after implantation. Ninety days after, animals were killed, and implant and adjacent tissues were prepared for histometric analysis. BIC values from immediate loaded implants were 58.7%, 57.7%, and 51.1%, respectively, while conventional loaded implants were 61.8%, 53.8%, and 68.4%. Differences statistically significant were not observed among groups (P=0.10, ANOVA test. These findings suggest that different apicocoronal positioning and loading protocols evaluated did not interfere in the percentage of bone-implant contact, suggesting that these procedures did not jeopardize osseointegration.

Coral Reef Coverage Percentage on Binor Paiton-Probolinggo Seashore

Directory of Open Access Journals (Sweden)

Dwi Budi Wiyanto

2016-01-01

Full Text Available The coral reef damage in Probolinggo region was expected to be caused by several factors. The first one comes from its society that exploits fishery by using cyanide toxin and bomb. The second one goes to the extraction of coral reef, which is used as decoration or construction materials. The other factor is likely caused by the existence of large industry on the seashore, such as Electric Steam Power Plant (PLTU Paiton and others alike. Related to the development of coral reef ecosystem, availability of an accurate data is crucially needed to support the manner of future policy, so the research of coral reef coverage percentage needs to be conducted continuously. The aim of this research is to collect biological data of coral reef and to identify coral reef coverage percentage in the effort of constructing coral reef condition basic data on Binor, Paiton, and Probolinggo regency seashore. The method used in this research is Line Intercept Transect (LIT method. LIT method is a method that used to decide benthic community on coral reef based on percentage growth, and to take note of benthic quantity along transect line. Percentage of living coral coverage in 3 meters depth on this Binor Paiton seashore that may be categorized in a good condition is 57,65%. While the rest are dead coral that is only 1,45%, other life form in 23,2%, and non-life form in 17,7%. A good condition of coral reef is caused by coral reef transplantation on the seashore, so this coral reef is dominated by Acropora Branching. On the other hand, Mortality Index (IM of coral reef resulted in 24,5%. The result from observation and calculation of coral reef is dominated by Hard Coral in Acropora Branching (ACB with coral reef coverage percentage of 39%, Coral Massive (CM with coral reef coverage percentage of 2,85%, Coral Foliose (CF with coral reef coverage percentage of 1,6%, and Coral Mushroom (CRM with coral reef coverage percentage of 8,5%. Observation in 10 meters depth

Coral Reef Coverage Percentage on Binor Paiton-Probolinggo Seashore

Directory of Open Access Journals (Sweden)

Dwi Budi Wiyanto

2016-02-01

Full Text Available The coral reef damage in Probolinggo region was expected to be caused by several factors. The first one comes from its society that exploits fishery by using cyanide toxin and bomb. The second one goes to the extraction of coral reef, which is used as decoration or construction materials. The other factor is likely caused by the existence of large industry on the seashore, such as Electric Steam Power Plant (PLTU Paiton and others alike. Related to the development of coral reef ecosystem, availability of an accurate data is crucially needed to support the manner of future policy, so the research of coral reef coverage percentage needs to be conducted continuously. The aim of this research is to collect biological data of coral reef and to identify coral reef coverage percentage in the effort of constructing coral reef condition basic data on Binor, Paiton, and Probolinggo regency seashore. The method used in this research is Line Intercept Transect (LIT method. LIT method is a method that used to decide benthic community on coral reef based on percentage growth, and to take note of benthic quantity along transect line. Percentage of living coral coverage in 3 meters depth on this Binor Paiton seashore that may be categorized in a good condition is 57,65%. While the rest are dead coral that is only 1,45%, other life form in 23,2%, and non-life form in 17,7%. A good condition of coral reef is caused by coral reef transplantation on the seashore, so this coral reef is dominated by Acropora Branching. On the other hand, Mortality Index (IM of coral reef resulted in 24,5%. The result from observation and calculation of coral reef is dominated by Hard Coral in Acropora Branching (ACB with coral reef coverage percentage of 39%, Coral Massive (CM with coral reef coverage percentage of 2,85%, Coral Foliose (CF with coral reef coverage percentage of 1,6%, and Coral Mushroom (CRM with coral reef coverage percentage of 8,5%. Observation in 10 meters depth

Protection Efficacy of Multivalent Egg Yolk Immunoglobulin against Eimeria Tenella Infection in Chickens

Directory of Open Access Journals (Sweden)

JJ Xu

2013-09-01

Full Text Available Background: To control avian coccidiosis with drug-independent strategy effec­tively and safely, multivalent hyperimmune egg yolk immunoglobulin (IgY was prepared and its ability to protect against Eimeria tenella infection was evaluated.Methods: Hens were orally immunized with live oocysts of 5 species of Eimeria for six times, antibody titers in serum and yolk were monitored by indirect enzyme-linked immunosorbent assay. The specific IgY was isolated, purified and lyophi­lized. IgY powder was orally administrated as dietary supplement in newly hatched chicks at various dosages. Birds were orally challenged with 10000 sporulated oo­cysts of E. tenella at 10 days of age, weighed and killed at 8 days post challenge, and the protective effect was assessed.Results: The averge yeid of IgY was 9.2 mg/ml yolk, the antibody titer of IgY reached to 1:163840 per mg with the purity up to 98%. Chickens fed IgY resulted in reduced mortality, increased body weight gain (BWG, reduced oocyst shedding, reduced caecal lesion score and increased anti-coccidial index. In terms of BWG and caecal lesion, IgY significantly enhanced the resistance of bird at ≥ 0.05% of IgY in the diet when compared with the challenged control group (P0.05.Conclusion: Supplementing newly hatched chicks with Eimeria-specific IgY represents a promising strategy to prevent avian coccidiosis.

The impact of N-glycosylation on conformation and stability of immunoglobulin Y from egg yolk.

Science.gov (United States)

Sheng, Long; He, Zhenjiao; Chen, Jiahui; Liu, Yaofa; Ma, Meihu; Cai, Zhaoxia

2017-03-01

Immunoglobulin Y (IgY) is a new therapeutic antibody, and its applications in industry are very broad. To provide insight into the effects of N-glycosylation on IgY, its conformation and stability were studied. In this research, IgY was extracted from egg yolk and then digested by peptide-N4-(N-acetyl-beta-glucosaminyl) asparagine-amidase. SDS-PAGE and infrared absorption spectrum showed that carbohydrates were distinctly reduced after enzymolysis. The circular dichroism spectrum indicated that the IgY molecule became more flexible and disordered after removal of N-glycan. The fluorescence intensity revealed that Trp residues were buried in a more hydrophobic environment after disposal of N-glycan. Storage stability decreased with the removal of oligosaccharide chains based on size-exclusion chromatography analysis. Deglycosylated IgY exhibited less resistance to guanidine hydrochloride-induced unfolding. After deglycosylation, IgY was more sensitive to pepsin. Therefore, N-glycosylation played an important role in the maintenance of the structure and stability of IgY. Copyright © 2016 Elsevier B.V. All rights reserved.

Prioritized rule based load management technique for residential building powered by PV/battery system

Directory of Open Access Journals (Sweden)

T.R. Ayodele

2017-06-01

Full Text Available In recent years, Solar Photovoltaic (PV system has presented itself as one of the main solutions to the electricity poverty plaguing the majority of buildings in rural communities with solar energy potential. However, the stochasticity associated with solar PV power output owing to vagaries in weather conditions is a major challenge in the deployment of the systems. This study investigates approach for maximizing the benefits of a Stand-Alone Photovoltaic-Battery (SAPVB system via techniques that provide for optimum energy gleaning and management. A rule-based load management scheme is developed and tested for a residential building. The approach allows load prioritizing and shifting based on certain rules. To achieve this, the residential loads are classified into Critical Loads (CLs and Uncritical Loads (ULs. The CLs are given higher priority and therefore are allowed to operate at their scheduled time while the ULs are of less priority, hence can be shifted to a time where there is enough electric power generation from the PV arrays rather than the loads being operated at the time period set by the user. Four scenarios were created to give insight into the applicability of the proposed rule based load management scheme. The result revealed that when the load management technique is not utilized as in the case of scenario 1 (Base case, the percentage satisfaction of the critical and uncritical loads by the PV system are 49.8% and 23.7%. However with the implementation of the load management scheme in scenarios 2, 3 and 4, the percentage satisfaction of the loads (CLs, ULs are (93.8%, 74.2%, (90.9%, 70.1% and (87.2%, 65.4% for scenarios 2, 3 and 4, respectively.

determination of perce rmination of percentage of caffeine content

African Journals Online (AJOL)

userpc

ABSTRACT. Two methods were employed for the deter brands of analgesic tablets which are;. Extraction using both water and chlorofor weighing apparatus and the percentage of. The percentage of caffeine using only water. Boska, and Panadol Extra were 7.40%, 5.60 caffeine using both water and chloroform i.

Dynamic Regression Intervention Modeling for the Malaysian Daily Load

Directory of Open Access Journals (Sweden)

Fadhilah Abdrazak

2014-05-01

Full Text Available Malaysia is a unique country due to having both fixed and moving holidays.  These moving holidays may overlap with other fixed holidays and therefore, increase the complexity of the load forecasting activities. The errors due to holidays’ effects in the load forecasting are known to be higher than other factors.  If these effects can be estimated and removed, the behavior of the series could be better viewed.  Thus, the aim of this paper is to improve the forecasting errors by using a dynamic regression model with intervention analysis.   Based on the linear transfer function method, a daily load model consists of either peak or average is developed.  The developed model outperformed the seasonal ARIMA model in estimating the fixed and moving holidays’ effects and achieved a smaller Mean Absolute Percentage Error (MAPE in load forecast.

26 CFR 1.613-1 - Percentage depletion; general rule.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 7 2010-04-01 2010-04-01 true Percentage depletion; general rule. 1.613-1... TAX (CONTINUED) INCOME TAXES (CONTINUED) Natural Resources § 1.613-1 Percentage depletion; general rule. (a) In general. In the case of a taxpayer computing the deduction for depletion under section 611...

Determination of percentage of caffeine content in some analgesic ...

African Journals Online (AJOL)

Two methods were employed for the determination of percentage Caffeine content in three brands of analgesic tablets which are; Extraction using only water as a solvent and Extraction using both water and chloroform as solvents, watch glass has been used as the weighing apparatus and the percentage of Caffeine ...

7 CFR 51.308 - Methods of sampling and calculation of percentages.

Science.gov (United States)

2010-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples Methods of Sampling and Calculation of Percentages § 51.308 Methods of sampling and calculation of percentages. (a) When the numerical... 7 Agriculture 2 2010-01-01 2010-01-01 false Methods of sampling and calculation of percentages. 51...

Glycaemic Index and Glycaemic Load of Pounded yam in Diabetic ...

African Journals Online (AJOL)

Incremental area under the blood glucose curve (IAUC) was used to determine the glycaemic index. Glycaemic load was determined using the percentage of available carbohydrate in the meal multiplied by the glycaemic index. Result: The glycaemic index of pounded yam was 61 and 59 in the diabetic type-2 and healthy ...

Foot Loading Characteristics of Different Graduations of Partial Weight Bearing

Science.gov (United States)

Gusinde, Johannes; Pauser, Johannes; Swoboda, Bernd; Gelse, Kolja; Carl, Hans-Dieter

2011-01-01

Limited weight bearing of the lower extremity is a commonly applied procedure in orthopaedic rehabilitation after reconstructive forefoot surgery, trauma surgery and joint replacement. The most frequent limitations are given as percentage of body weight (BW) and represent 10 or 50% BW. The extent of foot loading under these graduations of partial…

Therapeutic potential of anti-IL-1β IgY in guinea pigs with allergic asthma induced by ovalbumin.

Science.gov (United States)

Wei-xu, Hu; Qin, Xiang; Zhu, Wen; Yuan-yi, Chen; Li-feng, Zeng; Zhi-yong, Liu; Dan, He; Xiao-mu, Wu; Guo-zhu, Hu

2014-03-01

Interleukin-1 beta (IL-1β) plays pivotal roles in the progression of allergic airway inflammation. This study aims to determine whether the blockade of IL-1β can inhibit airway inflammation in guinea pigs with allergic asthma induced by the inhalation of aerosolized ovalbumin (OVA). Healthy guinea pigs treated with saline were used as normal controls (group C). The guinea pigs with allergic asthma induced by the inhalation of aerosolized OVA were randomly divided into three groups: (1) the M group containing negative control animals treated with saline; (2) the Z1 group containing animals treated by the inhalation of atomized 0.1% anti-IL-1β immunoglobulin yolk (IgY); and (3) the Z2 group containing positive control animals that were treated with budesonide. The inflammatory cells in the peripheral blood (PB) and bronchoalveolar lavage fluid (BALF) were evaluated using methylene blue and eosin staining. Cytokine concentrations were measured using an enzyme-linked immunosorbent assay. Pulmonary sections were examined using hematoxylin-eosin staining. Allergic inflammation and damage to the pulmonary tissues were decreased in the Z1 group compared to the M group. Eosinophils and neutrophils in the PB and BALF were significantly decreased in the Z1 group compared to the M group (Pguinea pigs with allergic asthma. The inhibitory activity may be due to the decrease in the numbers of eosinophils and neutrophils and the reduced levels of inflammatory cytokines and IgE in the PB and BALF. Copyright © 2013 Elsevier Ltd. All rights reserved.

13 CFR 126.701 - Can these subcontracting percentages requirements change?

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Can these subcontracting percentages requirements change? 126.701 Section 126.701 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION HUBZONE PROGRAM Contract Performance Requirements § 126.701 Can these subcontracting percentages...

Percentage compensation arrangements: suspect, but not illegal.

Science.gov (United States)

Fedor, F P

2001-01-01

Percentage compensation arrangements, in which a service is outsourced to a contractor that is paid in accordance with the level of its performance, are widely used in many business sectors. The HHS Office of Inspector General (OIG) has shown concern that these arrangements in the healthcare industry may offer incentives for the performance of unnecessary services or cause false claims to be made to Federal healthcare programs in violation of the antikickback statute and the False Claims Act. Percentage compensation arrangements can work and need not run afoul of the law as long as the healthcare organization carefully oversees the arrangement and sets specific safeguards in place. These safeguards include screening contractors, carefully evaluating their compliance programs, and obligating them contractually to perform within the limits of the law.

The Language of Comparisons: Communicating about Percentages

Directory of Open Access Journals (Sweden)

Jessica Polito

2014-01-01

Full Text Available While comparisons between percentages or rates appear frequently in journalism and advertising, and are an essential component of quantitative writing, many students fail to understand precisely what percentages mean, and lack fluency with the language used for comparisons. After reviewing evidence demonstrating this weakness, this experience-based perspective lays out a framework for teaching the language of comparisons in a structured way, and illustrates it with several authentic examples that exemplify mistaken or misleading uses of such numbers. The framework includes three common types of erroneous or misleading quantitative writing: the missing comparison, where a key number is omitted; the apples-to-pineapples comparison, where two subtly incomparable rates are presented; and the implied fallacy, where an invalid quantitative conclusion is left to the reader to infer.

Automated objective determination of percentage of malignant nuclei for mutation testing.

Science.gov (United States)

Viray, Hollis; Coulter, Madeline; Li, Kevin; Lane, Kristin; Madan, Aruna; Mitchell, Kisha; Schalper, Kurt; Hoyt, Clifford; Rimm, David L

2014-01-01

Detection of DNA mutations in tumor tissue can be a critical companion diagnostic test before prescription of a targeted therapy. Each method for detection of these mutations is associated with an analytic sensitivity that is a function of the percentage of tumor cells present in the specimen. Currently, tumor cell percentage is visually estimated resulting in an ordinal and highly variant result for a biologically continuous variable. We proposed that this aspect of DNA mutation testing could be standardized by developing a computer algorithm capable of accurately determining the percentage of malignant nuclei in an image of a hematoxylin and eosin-stained tissue. Using inForm software, we developed an algorithm, to calculate the percentage of malignant cells in histologic specimens of colon adenocarcinoma. A criterion standard was established by manually counting malignant and benign nuclei. Three pathologists also estimated the percentage of malignant nuclei in each image. Algorithm #9 had a median deviation from the criterion standard of 5.4% on the training set and 6.2% on the validation set. Compared with pathologist estimation, Algorithm #9 showed a similar ability to determine percentage of malignant nuclei. This method represents a potential future tool to assist in determining the percent of malignant nuclei present in a tissue section. Further validation of this algorithm or an improved algorithm may have value to more accurately assess percentage of malignant cells for companion diagnostic mutation testing.

Evaluation of Chicken IgY Generated Against Canine Parvovirus Viral-Like Particles and Development of Enzyme-Linked Immunosorbent Assay and Immunochromatographic Assay for Canine Parvovirus Detection.

Science.gov (United States)

He, Jinxin; Wang, Yuan; Sun, Shiqi; Zhang, Xiaoying

2015-11-01

Immunoglobulin Y (IgY) antibodies were generated against canine parvovirus virus-like particles (CPV-VLPs) antigen using chickens. Anti-CPV-VLPs-IgY was extracted from hen egg yolk and used for developing enzyme-linked immunosorbent assay (ELISA) and immunochromatographic assay (ICA) for the detection of CPV in dog feces. The cutoff negative values for anti-CPV-VLPs-IgY were determined using negative fecal samples (already confirmed by polymerase chain reaction [PCR]). In both ELISA and ICA, there was no cross-reaction with other diarrheal pathogens. Thirty-four fecal samples were collected from dogs with diarrhea, of which 26.47% were confirmed as CPV-positive samples by PCR, while 29.41% and 32.35% of the samples were found to be positive by ELISA and ICA, respectively. The developed ELISA and ICA exhibited 97.06% and 94.12% conformity with PCR. Higher sensitivity and specificity were observed for IgY-based ELISA and ICA. Thus, they could be suitable for routine use in the diagnosis of CPV in dogs.

Self-healing of mechanically-loaded self consolidating concretes with high volumes of fly ash

Energy Technology Data Exchange (ETDEWEB)

Mustafa Sahmaran; Suleyman B. Keskin; Gozde Ozerkan; Ismail O. Yaman [University of Gaziantep, Gaziantep (Turkey). Department of Civil Engineering

2008-11-15

This article discusses the effects of self-healing on self consolidating concretes incorporating high volumes of fly ash (HVFA-SCC) when subjected to continuous water exposure. For this purpose, self consolidating concretes with fly ash replacement ratios of 0%, 35%, and 55% were prepared having a constant water-cementitious material ratio of 0.35. A uniaxial compression load was applied to generate microcracks in concrete where cylindrical specimens were pre-loaded up to 70% and 90% of the ultimate compressive load determined at 28 days. Later, the extent of damage was determined as percentage of loss in mechanical properties and percentage of increase in permeation properties. After pre-loading, concrete specimens were stored in water for a month and the mechanical and permeation properties are monitored at every two weeks. It was observed that HVFA-SCC mixtures initially lost 27% of their strength when pre-loaded up to 90% of their ultimate strength, and after 30 days of water curing that reduction was only 7%, indicating a substantial healing. On the other hand, for SCC specimens without fly ash that were pre-loaded to the same level, the loss in strength was initially 19%, and after a month of moist curing it was only 13%. Similar observations were also made on the permeation properties with greater effects. As the HVFA-SCCs studied have an important amount of unhydrated fly ash available in their microstructure, these observations are attributed to the self-healing of the pre-existing cracks, mainly by hydration of anhydrous fly ash particles on the crack surfaces.

Using adaptive network based fuzzy inference system to forecast regional electricity loads

International Nuclear Information System (INIS)

Ying, L.-C.; Pan, M.-C.

2008-01-01

Since accurate regional load forecasting is very important for improvement of the management performance of the electric industry, various regional load forecasting methods have been developed. The purpose of this study is to apply the adaptive network based fuzzy inference system (ANFIS) model to forecast the regional electricity loads in Taiwan and demonstrate the forecasting performance of this model. Based on the mean absolute percentage errors and statistical results, we can see that the ANFIS model has better forecasting performance than the regression model, artificial neural network (ANN) model, support vector machines with genetic algorithms (SVMG) model, recurrent support vector machines with genetic algorithms (RSVMG) model and hybrid ellipsoidal fuzzy systems for time series forecasting (HEFST) model. Thus, the ANFIS model is a promising alternative for forecasting regional electricity loads

Using adaptive network based fuzzy inference system to forecast regional electricity loads

Energy Technology Data Exchange (ETDEWEB)

Ying, Li-Chih [Department of Marketing Management, Central Taiwan University of Science and Technology, 11, Pu-tzu Lane, Peitun, Taichung City 406 (China); Pan, Mei-Chiu [Graduate Institute of Management Sciences, Nanhua University, 32, Chung Keng Li, Dalin, Chiayi 622 (China)

2008-02-15

Since accurate regional load forecasting is very important for improvement of the management performance of the electric industry, various regional load forecasting methods have been developed. The purpose of this study is to apply the adaptive network based fuzzy inference system (ANFIS) model to forecast the regional electricity loads in Taiwan and demonstrate the forecasting performance of this model. Based on the mean absolute percentage errors and statistical results, we can see that the ANFIS model has better forecasting performance than the regression model, artificial neural network (ANN) model, support vector machines with genetic algorithms (SVMG) model, recurrent support vector machines with genetic algorithms (RSVMG) model and hybrid ellipsoidal fuzzy systems for time series forecasting (HEFST) model. Thus, the ANFIS model is a promising alternative for forecasting regional electricity loads. (author)

78 FR 48789 - Loan Guaranty: Percentage to Determine Net Value

Science.gov (United States)

2013-08-09

... DEPARTMENT OF VETERANS AFFAIRS Loan Guaranty: Percentage to Determine Net Value AGENCY: Department... mortgage holders in the Department of Veterans Affairs (VA) loan guaranty program concerning the percentage to be used in calculating the purchase price of a property that secured a terminated loan. The new...

HTGR fuel development: investigations of breakages of uranium-loaded weak acid resin microspheres

International Nuclear Information System (INIS)

Carpenter, J.A. Jr.

1977-11-01

During the HTGR fuel development program, a high percentage of uranium-loaded weak acid resin microspheres broke during pneumatic transfer, carbonization, and conversion. One batch had been loaded by the UO 3 method; the other by the ammonia neutralization method. To determine the causes of failure, samples of the two failed batches were investigated by optical microscopy, scanning electron microscopy, electron beam microprobe, and other techniques. Causes of failure are postulated and methods are suggested to prevent recurrence of this kind of failure

Effect of breed and non-genetic factors on percentage milk ...

African Journals Online (AJOL)

This study was done to determine the effect of breed and non-genetic factors on percentage milk composition of smallholders' dual-purpose cattle on-farm in the Ashanti Region. Fresh milk samples from various breeds of cows were assessed for percentage components of protein, fat, lactose, cholesterol, solidnon- fat and ...

Oleic Acid enhances all-trans retinoic Acid loading in nano-lipid emulsions.

Science.gov (United States)

Chinsriwongkul, Akhayachatra; Opanasopit, Praneet; Ngawhirunpat, Tanasait; Rojanarata, Theerasak; Sila-On, Warisada; Ruktanonchai, Uracha

2010-01-01

The aim of this study was to investigate the enhancement of all-trans retinoic acid (ATRA) loading in nano-lipid emulsions and stability by using oleic acid. The effect of formulation factors including initial ATRA concentration and the type of oil on the physicochemical properties, that is, percentage yield, percentage drug release, and photostability of formulations, was determined. The solubility of ATRA was increased in the order of oleic acid > MCT > soybean oil > water. The physicochemical properties of ATRA-loaded lipid emulsion, including mean particle diameter and zeta potential, were modulated by changing an initial ATRA concentration as well as the type and mixing ratio of oil and oleic acid as an oil phase. The particles of lipid emulsions had average sizes of less than 250 nm and negative zeta potential. The addition of oleic acid in lipid emulsions resulted in high loading capacity. The photodegradation rate was found to be dependent on the initial drug concentration but independent of the type of oily phase used in this study. The release rates were not affected by initial ATRA concentration but were affected by the type of oil, where oleic acid showed the highest release rate of ATRA from lipid emulsions.

Loads and loads and loads: The influence of prospective load, retrospective load, and ongoing task load in prospective memory

Directory of Open Access Journals (Sweden)

Beat eMeier

2015-06-01

Full Text Available In prospective memory tasks different kinds of load can occur. Adding a prospective memory task can impose a load on ongoing task performance. Adding ongoing task load can affect prospective memory performance. The existence of multiple target events increases prospective load and adding complexity to the to-be-remembered action increases retrospective load. In two experiments, we systematically examined the effects of these different types of load on prospective memory performance. Results showed an effect of prospective load on costs in the ongoing task for categorical targets (Experiment 2, but not for specific targets (Experiment 1. Retrospective load and ongoing task load both affected remembering the retrospective component of the prospective memory task. We suggest that prospective load can enhance costs in the ongoing task due to additional monitoring requirements. Retrospective load and ongoing task load seem to impact the division of resources between the ongoing task and retrieval of the retrospective component, which may affect disengagement from the ongoing task. In general, the results demonstrate that the different types of load affect prospective memory differentially.

Production and Purification Immunoglobulin against E. coli in Egg Yolk

Directory of Open Access Journals (Sweden)

Mohammadreza Nassiri

2016-08-01

Full Text Available Introduction Chicken is the only avian species in which polyclonal antibodies, like IgG is transported from the hen to the egg yolk in a similar manner as the transport of mammalian IgG from the mother to the fetus. Immunoglobulin Y in the chicken is transported to the egg and accumulates in the egg yolk in large quantities. IgY is an egg yolk antibody that has been used widely for treatment and prevention of infections in humans and animal. IgY is used for passive protection of the pathogen infections such as Escherichia coli, bovine and human rotavirus, bovine coronavirus, salmonella, staphylococcus and Pseudomonas. IgY is a promising candidate as an alternative to antibiotics. Eschericha coli strains of serotype O157: H7 belongs to a family of pathogenic E. coli called enterohemorrhagic E. coli (EHEC strains responsible for hemorrhagic colitis, bloody or non-bloody diarrhea, and hemolytic uremic syndrome in humans. This strain of E. coli pathogenises by adhering to host intestinal epithelium and forming bacterial colonies. The purpose of this study was to produce and purify immunoglobulin Y against E. coli O157:H7 and develop specific polyclonal anti E. coli antibody in the egg yolk. Materials and Methods Sixteen-week-old laying hens (Mashhad, Iran were kept in individual cages with food and water ad libitum. Immunization of hens was performed by intramuscularly injecting killed E. coli O157: H7 with an equal volume of Freund’s complete adjuvant into two sides of chest area (Sigma, USA for the first immunization. Two booster immunizations followed up using complete and incomplete Freund’s adjuvants in two weeks interval. Freund’s adjuvant without antigen was injected to the control group. Two weeks after the last injection, the eggs were collected daily for eight weeks, marked and stored at 4 ºC. In order to IgY purification, eggs were collected. Purification of IgY from egg yolk was based on Polson and using PEG6000. Finally, the

Uncertainties in pipeline water percentage measurement

Energy Technology Data Exchange (ETDEWEB)

Scott, Bentley N.

2005-07-01

Measurement of the quantity, density, average temperature and water percentage in petroleum pipelines has been an issue of prime importance. The methods of measurement have been investigated and have seen continued improvement over the years. Questions are being asked as to the reliability of the measurement of water in the oil through sampling systems originally designed and tested for a narrow range of densities. Today most facilities sampling systems handle vastly increased ranges of density and types of crude oils. Issues of pipeline integrity, product loss and production balances are placing further demands on the issues of accurate measurement. Water percentage is one area that has not received the attention necessary to understand the many factors involved in making a reliable measurement. A previous paper1 discussed the issues of uncertainty of the measurement from a statistical perspective. This paper will outline many of the issues of where the errors lie in the manual and automatic methods in use today. A routine to use the data collected by the analyzers in the on line system for validation of the measurements will be described. (author) (tk)

Forecasting Error Calculation with Mean Absolute Deviation and Mean Absolute Percentage Error

Science.gov (United States)

Khair, Ummul; Fahmi, Hasanul; Hakim, Sarudin Al; Rahim, Robbi

2017-12-01

Prediction using a forecasting method is one of the most important things for an organization, the selection of appropriate forecasting methods is also important but the percentage error of a method is more important in order for decision makers to adopt the right culture, the use of the Mean Absolute Deviation and Mean Absolute Percentage Error to calculate the percentage of mistakes in the least square method resulted in a percentage of 9.77% and it was decided that the least square method be worked for time series and trend data.

A High Precision Artificial Neural Networks Model for Short-Term Energy Load Forecasting

Directory of Open Access Journals (Sweden)

Ping-Huan Kuo

2018-01-01

Full Text Available One of the most important research topics in smart grid technology is load forecasting, because accuracy of load forecasting highly influences reliability of the smart grid systems. In the past, load forecasting was obtained by traditional analysis techniques such as time series analysis and linear regression. Since the load forecast focuses on aggregated electricity consumption patterns, researchers have recently integrated deep learning approaches with machine learning techniques. In this study, an accurate deep neural network algorithm for short-term load forecasting (STLF is introduced. The forecasting performance of proposed algorithm is compared with performances of five artificial intelligence algorithms that are commonly used in load forecasting. The Mean Absolute Percentage Error (MAPE and Cumulative Variation of Root Mean Square Error (CV-RMSE are used as accuracy evaluation indexes. The experiment results show that MAPE and CV-RMSE of proposed algorithm are 9.77% and 11.66%, respectively, displaying very high forecasting accuracy.

Reliability of the Load-Velocity Relationship Obtained Through Linear and Polynomial Regression Models to Predict the One-Repetition Maximum Load.

Science.gov (United States)

Pestaña-Melero, Francisco Luis; Haff, G Gregory; Rojas, Francisco Javier; Pérez-Castilla, Alejandro; García-Ramos, Amador

2017-12-18

This study aimed to compare the between-session reliability of the load-velocity relationship between (1) linear vs. polynomial regression models, (2) concentric-only vs. eccentric-concentric bench press variants, as well as (3) the within-participants vs. the between-participants variability of the velocity attained at each percentage of the one-repetition maximum (%1RM). The load-velocity relationship of 30 men (age: 21.2±3.8 y; height: 1.78±0.07 m, body mass: 72.3±7.3 kg; bench press 1RM: 78.8±13.2 kg) were evaluated by means of linear and polynomial regression models in the concentric-only and eccentric-concentric bench press variants in a Smith Machine. Two sessions were performed with each bench press variant. The main findings were: (1) first-order-polynomials (CV: 4.39%-4.70%) provided the load-velocity relationship with higher reliability than second-order-polynomials (CV: 4.68%-5.04%); (2) the reliability of the load-velocity relationship did not differ between the concentric-only and eccentric-concentric bench press variants; (3) the within-participants variability of the velocity attained at each %1RM was markedly lower than the between-participants variability. Taken together, these results highlight that, regardless of the bench press variant considered, the individual determination of the load-velocity relationship by a linear regression model could be recommended to monitor and prescribe the relative load in the Smith machine bench press exercise.

Polyurethane foam loaded with sodium dodecylsulfate for the extraction of 'quat' pesticides from aqueous medium: Optimization of loading conditions.

Science.gov (United States)

Vinhal, Jonas O; Lima, Claudio F; Cassella, Ricardo J

2016-09-01

The cationic herbicides paraquat, diquat and difenzoquat are largely used in different cultures worldwide. With this, there is an intrinsic risk of environmental contamination when these herbicides achieve natural waters. The goal of this work was to propose a novel and low-cost sorbent for the removal of the cited herbicides from aqueous medium. The proposed sorbent was prepared by loading polyurethane foam with sodium dodecylsulfate. The influence of several parameters (SDS concentration, HCl concentration and shaking time) on the loading process was investigated. The results obtained in this work demonstrated that all studied variables influenced the loading process, having significant effect on the extraction efficiency of the resulted PUF-SDS. At optimized conditions, the PUF was loaded by shaking 200mg of crushed foam with 200mL of a solution containing 5.0×10(-3)molL(-1) SDS and 0.25molL(-1) HCl, for 30min. The obtained PUF-SDS was efficient for removing the three herbicides from aqueous medium, achieving extraction percentages higher than 90%. The sorption process followed a pseudo second-order kinetics, which presented excellent predictive capacity of the amount of herbicide retained with time. Copyright © 2016 Elsevier Inc. All rights reserved.

AC Own Motion Percentage of Randomly Sampled Cases

Data.gov (United States)

Social Security Administration — Longitudinal report detailing the numbers and percentages of Appeals Council (AC) own motion review actions taken on un-appealed favorable hearing level decisions...

Elisa de captura com IgY para quantificação de acetato de lupeol em Vernonia scorpioides lam. Pers (asteraceae Capture IgY-elisa to quantify lupeol acetate in Vernonia scorpioides lam. Pers (asteraceae

Directory of Open Access Journals (Sweden)

Ronald Bastos Freire

2004-08-01

Full Text Available O presente experimento descreve, pela primeira vez, a elaboração de um ensaio imunoenzimático (ELISA de captura com anticorpos IgY para a detecção e quantificação de acetato de lupeol (LAc em Vernonia scorpioides Lam. Pers (Asteraceae. Anticorpos anti-LAc, obtidos partir do soro das aves e gemas de seus ovos, após imunização com o conjugado acetato de lupeol-cBSA, foram concentrados em coluna contendo LAc-BSA acoplado a sepharose. A eficácia da metodologia de detecção imunológica foi de 97%, com índices de sensibilidade e especificidade de 99% e 95%, respectivamente com limites de detecção do ensaio entre 0,02µg.g-1 (inferior e 10 µg.g-1 (superior. A robustez do método foi atestada pela sua elevada reprodutibilidade (entre 94,75% e 96,81%, e pelo baixo coeficiente de variação interna (4,22 ± 1,03% nas condições de execução descritas.For the first time, a yolk immunoglobulins-based immunenzymatic assay (capture IgY-ELISA was carried out to detect Lupeol acetate (LAc from Vernonia scorpioides Lam. Pers (Asteraceae. Antibodies (IgY against lupeol acetate (anti-LAc antibodies were raised in White Leghorn hens immunized with LAc conjugated to the bovine serum albumin (LAc-BSA. The anti-LAc antibodies were recovered by cleanup columns containing LAc-BSA coupled to sepharose. The capture IgY-ELISA efficacy was of 97% when the predictive indices of sensitivity and specificity were 99.0% and 95%, respectively. The lowest and highest detection limits were of 0.02µg g-1 and 10µg.g-1 of plant extract, respectively. The strength of this method was attested by its high reproducibility (between 94.75% and 96.81%, and a low internal variation (4.22 ± 1.03%, under the described conditions.

Application of fuzzy – Neuro to model weather parameter variability impacts on electrical load based on long-term forecasting

Directory of Open Access Journals (Sweden)

Danladi Ali

2018-03-01

Full Text Available Long-term load forecasting provides vital information about future load and it helps the power industries to make decision regarding electrical energy generation and delivery. In this work, fuzzy – neuro model is developed to forecast a year ahead load in relation to weather parameter (temperature and humidity in Mubi, Adamawa State. It is observed that: electrical load increased with increase in temperature and relative humidity does not show notable effect on electrical load. The accuracy of the prediction is obtained at 98.78% with the corresponding mean absolute percentage error (MAPE of 1.22%. This confirms that fuzzy – neuro is a good tool for load forecasting. Keywords: Electrical load, Load forecasting, Fuzzy logic, Back propagation, Neuro-fuzzy, Weather parameter

Low reflectance radio frequency load

Science.gov (United States)

Ives, R. Lawrence; Mizuhara, Yosuke M

2014-04-01

A load for traveling microwave energy has an absorptive volume defined by cylindrical body enclosed by a first end cap and a second end cap. The first end cap has an aperture for the passage of an input waveguide with a rotating part that is coupled to a reflective mirror. The inner surfaces of the absorptive volume consist of a resistive material or are coated with a coating which absorbs a fraction of incident RF energy, and the remainder of the RF energy reflects. The angle of the reflector and end caps is selected such that reflected RF energy dissipates an increasing percentage of the remaining RF energy at each reflection, and the reflected RF energy which returns to the rotating mirror is directed to the back surface of the rotating reflector, and is not coupled to the input waveguide. Additionally, the reflector may have a surface which generates a more uniform power distribution function axially and laterally, to increase the power handling capability of the RF load. The input waveguide may be corrugated for HE11 mode input energy.

Predicted percentage dissatisfied with ankle draft.

Science.gov (United States)

Liu, S; Schiavon, S; Kabanshi, A; Nazaroff, W W

2017-07-01

Draft is unwanted local convective cooling. The draft risk model of Fanger et al. (Energy and Buildings 12, 21-39, 1988) estimates the percentage of people dissatisfied with air movement due to overcooling at the neck. There is no model for predicting draft at ankles, which is more relevant to stratified air distribution systems such as underfloor air distribution (UFAD) and displacement ventilation (DV). We developed a model for predicted percentage dissatisfied with ankle draft (PPD AD ) based on laboratory experiments with 110 college students. We assessed the effect on ankle draft of various combinations of air speed (nominal range: 0.1-0.6 m/s), temperature (nominal range: 16.5-22.5°C), turbulence intensity (at ankles), sex, and clothing insulation (thermal sensation and air speed at ankles are the dominant parameters affecting draft. The seated subjects accepted a vertical temperature difference of up to 8°C between ankles (0.1 m) and head (1.1 m) at neutral whole-body thermal sensation, 5°C more than the maximum difference recommended in existing standards. The developed ankle draft model can be implemented in thermal comfort and air diffuser testing standards. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

7 CFR 981.47 - Method of establishing salable and reserve percentages.

Science.gov (United States)

2010-01-01

...) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF... effectuate the declared policy of the act, he shall designate such percentages. Except as provided in § 981... percentages, the Secretary shall give consideration to the ratio of estimated trade demand (domestic plus...

Degradation forecast for PEMFC cathode-catalysts under cyclic loads

Science.gov (United States)

Moein-Jahromi, M.; Kermani, M. J.; Movahed, S.

2017-08-01

Degradation of Fuel Cell (FC) components under cyclic loads is one of the biggest bottlenecks in FC commercialization. In this paper, a novel experimental based algorithm is presented to predict the Catalyst Layer (CL) performance loss during cyclic load. The algorithm consists of two models namely Models 1 and 2. The Model 1 calculates the Electro-Chemical Surface Area (ECSA) and agglomerate size (e.g. agglomerate radius, rt,agg) for the catalyst layer under cyclic load. The Model 2 is the already-existing model from our earlier studies that computes catalyst performance with fixed structural parameters. Combinations of these two Models predict the CL performance under an arbitrary cyclic load. A set of parametric/sensitivity studies is performed to investigate the effects of operating parameters on the percentage of Voltage Degradation Rate (VDR%) with rank 1 for the most influential one. Amongst the considered parameters (such as: temperature, relative humidity, pressure, minimum and maximum voltage of the cyclic load), the results show that temperature and pressure have the most and the least influences on the VDR%, respectively. So that, increase of temperature from 60 °C to 80 °C leads to over 20% VDR intensification, the VDR will also reduce 1.41% by increasing pressure from 2 atm to 4 atm.

Dressing percentage and Carcass characteristics of four Indigenous ...

African Journals Online (AJOL)

Dressing percentage and Carcass characteristics of four Indigenous cattle breeds in Nigeria. ... Nigerian Journal of Animal Production ... Their feed intake, live and carcasses weights and the weights of their major carcass components and ...

26 CFR 1.1502-44 - Percentage depletion for independent producers and royalty owners.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 12 2010-04-01 2010-04-01 false Percentage depletion for independent producers...-44 Percentage depletion for independent producers and royalty owners. (a) In general. The sum of the percentage depletion deductions for the taxable year for all oil or gas property owned by all members, plus...

Dynamic interaction between STLV-1 proviral load and T-cell response during chronic infection and after immunosuppression in non-human primates.

Directory of Open Access Journals (Sweden)

Sandrine Souquière

Full Text Available We used mandrills (Mandrillus sphinx naturally infected with simian T-cell leukemia virus type 1 (STLV-1 as a model for evaluating the influence of natural STLV-1 infection on the dynamics and evolution of the immune system during chronic infection. Furthermore, in order to evaluate the role of the immune system in controlling the infection during latency, we induced immunosuppression in the infected monkeys. We first showed that the STLV-1 proviral load was higher in males than in females and increased significantly with the duration of infection: mandrills infected for 10-6 years had a significantly higher proviral load than those infected for 2-4 years. Curiously, this observation was associated with a clear reduction in CD4+ T-cell number with age. We also found that the percentage of CD4(+ T cells co-expressing the activation marker HLA-DR and the mean percentage of CD25(+ in CD4(+ and CD8(+ T cells were significantly higher in infected than in uninfected animals. Furthermore, the STLV-1 proviral load correlated positively with T-cell activation but not with the frequency of T cells secreting interferon gamma in response to Tax peptides. Lastly, we showed that, during immunosuppression in infected monkeys, the percentages of CD8(+ T cells expressing HLA-DR(+ and of CD4(+ T cells expressing the proliferation marker Ki67 decreased significantly, although the percentage of CD8(+ T cells expressing HLA-DR(+ and Ki67 increased significantly by the end of treatment. Interestingly, the proviral load increased significantly after immunosuppression in the monkey with the highest load. Our study demonstrates that mandrills naturally infected with STLV-1 could be a suitable model for studying the relations between host and virus. Further studies are needed to determine whether the different compartments of the immune response during infection induce the long latency by controlling viral replication over time. Such studies would provide important

Short-Term Forecasting of Loads and Wind Power for Latvian Power System: Accuracy and Capacity of the Developed Tools

Directory of Open Access Journals (Sweden)

Radziukynas V.

2016-04-01

Full Text Available The paper analyses the performance results of the recently developed short-term forecasting suit for the Latvian power system. The system load and wind power are forecasted using ANN and ARIMA models, respectively, and the forecasting accuracy is evaluated in terms of errors, mean absolute errors and mean absolute percentage errors. The investigation of influence of additional input variables on load forecasting errors is performed. The interplay of hourly loads and wind power forecasting errors is also evaluated for the Latvian power system with historical loads (the year 2011 and planned wind power capacities (the year 2023.

Short-Term Forecasting of Loads and Wind Power for Latvian Power System: Accuracy and Capacity of the Developed Tools

Science.gov (United States)

Radziukynas, V.; Klementavičius, A.

2016-04-01

The paper analyses the performance results of the recently developed short-term forecasting suit for the Latvian power system. The system load and wind power are forecasted using ANN and ARIMA models, respectively, and the forecasting accuracy is evaluated in terms of errors, mean absolute errors and mean absolute percentage errors. The investigation of influence of additional input variables on load forecasting errors is performed. The interplay of hourly loads and wind power forecasting errors is also evaluated for the Latvian power system with historical loads (the year 2011) and planned wind power capacities (the year 2023).

Preparation of berbamine loaded chitosan-agarose microspheres and in vitro release study

Directory of Open Access Journals (Sweden)

Zhang Hu

2012-01-01

Full Text Available Berbamine loaded chitosan-agarose microspheres were prepared using a water-in-oil emulsion technique. Optimum preparing parameters were determined by orthogonal experiments as follows: ratio of berbamine to chitosan (w/w is 1:10; percentage of emulsifier (span 80, v/v is 6%; volume of glutaraldehyde is 2 mL; and reaction temperature is 70 ºC. Under these optimal conditions, the encapsulation efficiency and loading capacity of microspheres are 84.57% and 8.44%, respectively. The swelling tests showed that the microspheres possessed higher swelling ratio at pH 7.4 than at pH 1.2. FTIR indicated that berbamine had been successfully loaded in the chitosan-agarose microspheres by physical entrapment. In vitro release studies showed that berbamine was released from microspheres in a significantly sustained fashion.

Body fat percentage of urban South African children: implications for health and fitness.

Science.gov (United States)

Goon, D T; Toriola, A L; Shaw, B S; Amusa, L O; Khoza, L B; Shaw, I

2013-09-01

To explore gender and racial profiling of percentage body fat of 1136 urban South African children attending public schools in Pretoria Central. This is a cross-sectional survey of 1136 randomly selected children (548 boys and 588 girls) aged 9-13 years in urban (Pretoria Central) South Africa. Body mass, stature, skinfolds (subscapular and triceps) were measured. Data were analysed using descriptive statistics (means and standard deviations). Differences in the mean body fat percentage were examined for boys and girls according to their age group/race, using independent t-test samples. Girls had a significantly (p = 0.001) higher percentage body fat (22.7 ± 5.7%, 95% CI = 22.3, 23.2) compared to boys (16.1 ± 7.7%, 95% CI = 15.5, 16.8). Percentage body fat fluctuated with age in both boys and girls. Additionally, girls had significantly (p = 0.001) higher percentage body fat measurements at all ages compared to boys. Viewed racially, black children (20.1 ± 7.5) were significantly (p = 0.010) fatter than white children (19.0 ± 7.4) with a mean difference of 4.0. Black children were fatter than white children at ages 9, 10, 12 and 13 years, with a significant difference (p = 0.009) observed at age 12 years. There was a considerably higher level of excessive percentage body fat among school children in Central Pretoria, South Africa, with girls having significantly higher percentage body fat compared to boys. Racially, black children were fatter than white children. The excessive percentage body fat observed among the children in this study has implications for their health and fitness. Therefore, an intervention programme must be instituted in schools to prevent and control possible excessive percentage body fat in this age group.

Green turtles (Chelonia mydas) have novel asymmetrical antibodies

Science.gov (United States)

Work, Thierry M.; Dagenais, Julie; Breeden, Renee; Schneemann, Anette; Sung, Joyce; Hew, Brian; Balazs, George H.; Berestecky, John M.

2015-01-01

Igs in vertebrates comprise equally sized H and L chains, with exceptions such as H chain–only Abs in camels or natural Ag receptors in sharks. In Reptilia, Igs are known as IgYs. Using immunoassays with isotype-specific mAbs, in this study we show that green turtles (Chelonia mydas) have a 5.7S 120-kDa IgY comprising two equally sized H/L chains with truncated Fc and a 7S 200-kDa IgY comprised of two differently sized H chains bound to L chains and apparently often noncovalently associated with an antigenically related 90-kDa moiety. Both the 200- and 90-kDa 7S molecules are made in response to specific Ag, although the 90-kDa molecule appears more prominent after chronic Ag stimulation. Despite no molecular evidence of a hinge, electron microscopy reveals marked flexibility of Fab arms of 7S and 5.7S IgY. Both IgY can be captured with protein G or melon gel, but less so with protein A. Thus, turtle IgY share some characteristics with mammalian IgG. However, the asymmetrical structure of some turtle Ig and the discovery of an Ig class indicative of chronic antigenic stimulation represent striking advances in our understanding of immunology.

High body fat percentage among adult women in Malaysia: the role ...

African Journals Online (AJOL)

Body fat percentage is regarded as an important measurement for diagnosis of obesity. The aim of this study is to determine the association of high body fat percentage (BF%) and lifestyle among adult women. The study was conducted on 327 women, aged 40-59 years, recruited during a health screening program. Data on ...

12 CFR Appendix A to Part 230 - Annual Percentage Yield Calculation

Science.gov (United States)

2010-01-01

... following simple formula: APY=100 (Interest/Principal) Examples (1) If an institution pays $61.68 in... percentage yield is 5.39%, using the simple formula: APY=100(134.75/2,500) APY=5.39% For $15,000, interest is... Yield Calculation The annual percentage yield measures the total amount of interest paid on an account...

Preparation of lumen-loaded kenaf pulp with magnetite (Fe3O4)

International Nuclear Information System (INIS)

Zakaria, S.; Ong, B.H.; Ahmad, S.H.; Abdullah, M.; Yamauchi, T.

2005-01-01

Magnetic pulps were prepared from unbleached kenaf (hibiscus cannabinus L.) kraft pulps. Fe 3 O 4 or magnetite powder was used to load into the pulp's lumen and pit. Aluminum sulphate [Al 2 (SO 4 ) 3 ] (alum) and polyethylenimine (PEI), both mainly function as retention aid were used throughout the experiment and found to be beneficial in the preparation of this magnetic pulps. The ash content method was used to determine the amount of magnetite retained in the lumen and pit. The utilization of PEI up to 2% per pulp fibres was found to be the best result on lumen loading. The deposition of magnetite powder in lumen and pit is found decrease as the addition of PEI used is more than 2% per pulp fibres. Scanning electron microscope (SEM) clearly shows the distribution of magnetite deposited in the lumen. Tensile index and folding endurance of the loaded fibre decreased slightly as the percentage of loading pigment increased

Fracture studies on stainless steel straight pipes under earthquake-type cyclic loading

International Nuclear Information System (INIS)

Raghava, G.; Vishnuvardhan, S.; Gandhi, P.; Vaze, K.K.

2014-01-01

In order to study the crack growth and cyclic fracture behaviour, which are required for realistic assessment of Leak Before Break (LBB) applicability, experimental investigations were carried out on straight pipes under quasi-crystal loading. Totally 13 pipes were tested; three were stainless steel welded (SSW) using conventional shielded metal arc welding (SMAW) technique and the remaining specimens were Narrow Gap Welded (NGW). The fracture tests were carried out under load control, displacement control and combination of the two; the pipes were subjected to different amplitudes of load or load-line displacement (LLD), which were decided based on the response of the pipes under monotonic loading. Cyclic tearing and crack growth studies on eight straight pipes of the same material reported earlier in published literature are also considered for studying the results and understanding the behaviour. Under load control, with almost equal load amplitude, the NGW pipe exhibited improved life in comparison with SMAW pipe when both are subjected to cyclic loading. The crack growth and tearing instability behaviour of the pipes were studied. The same were found to be different for load control, displacement control and combined control tests. Based in the load-controlled experimental results, material specific plot between cyclic load amplitude (as a percentage of maximum load carrying capacity of a specimen under monotonic fracture) and number of cycles to failure was obtained. The results indicate that the piping components subjected to quasi-cyclic loading may fail in very less number of cycles even when the load amplitude is sufficiently below the monotonic fracture/collapse load. These studies will be helpful in designing nuclear power plant (NPP) piping components subjected to earthquake-type cyclic loading. (author)

Thermoinactivation Mechanism of Glucose Isomerase

Science.gov (United States)

Lim, Leng Hong; Saville, Bradley A.

In this article, the mechanisms of thermoinactivation of glucose isomerase (GI) from Streptomyces rubiginosus (in soluble and immobilized forms) were investigated, particularly the contributions of thiol oxidation of the enzyme's cysteine residue and a "Maillard-like" reaction between the enzyme and sugars in high fructose corn syrup (HFCS). Soluble GI (SGI) was successfully immobilized on silica gel (13.5 μm particle size), with an activity yield between 20 and 40%. The immobilized GI (IGI) has high enzyme retention on the support during the glucose isomerization process. In batch reactors, SGI (half-life =145 h) was more stable than IGI (half-life=27 h) at 60°C in HFCS, whereas at 80°C, IGI (half-life=12 h) was more stable than SGI (half-life=5.2 h). IGI was subject to thiol oxidation at 60°C, which contributed to the enzyme's deactivation. IGI was subject to thiol oxidation at 80°C, but this did not contribute to the deactivation of the enzyme. SGI did not undergo thiol oxidation at 60°C, but at 80°C SGI underwent severe precipitation and thiol oxidation, which caused the enzyme to deactivate. Experimental results show that immobilization suppresses the destablizing effect of thiol oxidation on GI. A "Maillard-like" reaction between SGI and the sugars also caused SGI thermoinactivation at 60, 70, and 80°C, but had minimal effect on IGI. At 60 and 80°C, IGI had higher thermostability in continuous reactors than in batch reactors, possibily because of reduced contact with deleterious compounds in HFCS.

Effects of a low-glycemic load vs low-fat diet in obese young adults: a randomized trial.

Science.gov (United States)

Ebbeling, Cara B; Leidig, Michael M; Feldman, Henry A; Lovesky, Margaret M; Ludwig, David S

2007-05-16

The results of clinical trials involving diet in the treatment of obesity have been inconsistent, possibly due to inherent physiological differences among study participants. To determine whether insulin secretion affects weight loss with 2 popular diets. Randomized trial of obese young adults (aged 18-35 years; n = 73) conducted from September 2004 to December 2006 in Boston, Mass, and consisting of a 6-month intensive intervention period and a 12-month follow-up period. Serum insulin concentration at 30 minutes after a 75-g dose of oral glucose was determined at baseline as a measure of insulin secretion. Outcomes were assessed at 6, 12, and 18 months. Missing data were imputed conservatively. A low-glycemic load (40% carbohydrate and 35% fat) vs low-fat (55% carbohydrate and 20% fat) diet. Body weight, body fat percentage determined by dual-energy x-ray absorptiometry, and cardiovascular disease risk factors. Change in body weight and body fat percentage did not differ between the diet groups overall. However, insulin concentration at 30 minutes after a dose of oral glucose was an effect modifier (group x time x insulin concentration at 30 minutes: P = .02 for body weight and P = .01 for body fat percentage). For those with insulin concentration at 30 minutes above the median (57.5 microIU/mL; n = 28), the low-glycemic load diet produced a greater decrease in weight (-5.8 vs -1.2 kg; P = .004) and body fat percentage (-2.6% vs -0.9%; P = .03) than the low-fat diet at 18 months. There were no significant differences in these end points between diet groups for those with insulin concentration at 30 minutes below the median level (n = 28). Insulin concentration at 30 minutes after a dose of oral glucose was not a significant effect modifier for cardiovascular disease risk factors. In the full cohort, plasma high-density lipoprotein cholesterol and triglyceride concentrations improved more on the low-glycemic load diet, whereas low-density lipoprotein cholesterol

Can we improve pollen season definitions by using the symptom load index in addition to pollen counts?

International Nuclear Information System (INIS)

Bastl, Katharina; Kmenta, Maximilian; Geller-Bernstein, Carmi; Berger, Uwe; Jäger, Siegfried

2015-01-01

Airborne pollen measurements are the foundation of aerobiological research and provide essential raw data for various disciplines. Pollen itself should be considered a relevant factor in air quality. Symptom data shed light on the relationship of pollen allergy and pollination. The aim of this study is to assess the spatial variation of local, regional and national symptom datasets. Ten pollen season definitions are used to calculate the symptom load index for the birch and grass pollen seasons (2013–2014) in Austria. (1) Local, (2) regional and (3) national symptom datasets are used to examine spatial variations and a consistent pattern was found. In conclusion, national datasets are suitable for first insights where no sufficient local or regional dataset is available and season definitions based on percentages provide a practical solution, as they can be applied in regions with different pollen loads and produce more constant results. - Highlights: • The definition of the pollen season has an impact on the calculated symptom load. • Pollen season definitions based on percentages of total pollen are a practical solution. • The symptom load index is a robust tool to assess the allergy burden in a population. • Local, regional and national burdens of pollen allergy sufferers are comparable. - The symptom load index is a robust tool to assess the allergy burden in a population. Local, regional and national burdens of pollen allergy sufferers are comparable

Low reflectance high power RF load

Science.gov (United States)

Ives, R. Lawrence; Mizuhara, Yosuke M.

2016-02-02

A load for traveling microwave energy has an absorptive volume defined by cylindrical body enclosed by a first end cap and a second end cap. The first end cap has an aperture for the passage of an input waveguide with a rotating part that is coupled to a reflective mirror. The inner surfaces of the absorptive volume consist of a resistive material or are coated with a coating which absorbs a fraction of incident RF energy, and the remainder of the RF energy reflects. The angle of the reflector and end caps is selected such that reflected RF energy dissipates an increasing percentage of the remaining RF energy at each reflection, and the reflected RF energy which returns to the rotating mirror is directed to the back surface of the rotating reflector, and is not coupled to the input waveguide. Additionally, the reflector may have a surface which generates a more uniform power distribution function axially and laterally, to increase the power handling capability of the RF load. The input waveguide may be corrugated for HE11 mode input energy.

The Role of Monocyte Percentage in Osteoporosis in Male Rheumatic Diseases.

Science.gov (United States)

Su, Yu-Jih; Chen, Chao Tung; Tsai, Nai-Wen; Huang, Chih-Cheng; Wang, Hung-Chen; Kung, Chia-Te; Lin, Wei-Che; Cheng, Ben-Chung; Su, Chih-Min; Hsiao, Sheng-Yuan; Lu, Cheng-Hsien

2017-11-01

Osteoporosis is easily overlooked in male patients, especially in the field of rheumatic diseases mostly prevalent with female patients, and its link to pathogenesis is still lacking. Attenuated monocyte apoptosis from a transcriptome-wide expression study illustrates the role of monocytes in osteoporosis. This study tested the hypothesis that the monocyte percentage among leukocytes could be a biomarker of osteoporosis in rheumatic diseases. Eighty-seven males with rheumatic diseases were evaluated in rheumatology outpatient clinics for bone mineral density (BMD) and surrogate markers, such as routine peripheral blood parameters and autoantibodies. From the total number of 87 patients included in this study, only 15 met the criteria for diagnosis of osteoporosis. Both age and monocyte percentage remained independently associated with the presence of osteoporosis. Steroid dose (equivalent prednisolone dose) was negatively associated with BMD of the hip area and platelet counts were negatively associated with BMD and T score of the spine area. Besides age, monocyte percentage meets the major requirements for osteoporosis in male rheumatic diseases. A higher monocyte percentage in male rheumatic disease patients, aged over 50 years in this study, and BMD study should be considered in order to reduce the risk of osteoporosis-related fractures.

Loads and loads and loads: the influence of prospective load, retrospective load, and ongoing task load in prospective memory

Science.gov (United States)

Meier, Beat; Zimmermann, Thomas D.

2015-01-01

In prospective memory tasks different kinds of load can occur. Adding a prospective memory task can impose a load on ongoing task performance. Adding ongoing task load (OTL) can affect prospective memory performance. The existence of multiple target events increases prospective load (PL) and adding complexity to the to-be-remembered action increases retrospective load (RL). In two experiments, we systematically examined the effects of these different types of load on prospective memory performance. Results showed an effect of PL on costs in the ongoing task for categorical targets (Experiment 2), but not for specific targets (Experiment 1). RL and OTL both affected remembering the retrospective component of the prospective memory task. We suggest that PL can enhance costs in the ongoing task due to additional monitoring requirements. RL and OTL seem to impact the division of resources between the ongoing task and retrieval of the retrospective component, which may affect disengagement from the ongoing task. In general, the results demonstrate that the different types of load affect prospective memory differentially. PMID:26082709

Loads and loads and loads: the influence of prospective load, retrospective load, and ongoing task load in prospective memory.

Science.gov (United States)

Meier, Beat; Zimmermann, Thomas D

2015-01-01

In prospective memory tasks different kinds of load can occur. Adding a prospective memory task can impose a load on ongoing task performance. Adding ongoing task load (OTL) can affect prospective memory performance. The existence of multiple target events increases prospective load (PL) and adding complexity to the to-be-remembered action increases retrospective load (RL). In two experiments, we systematically examined the effects of these different types of load on prospective memory performance. Results showed an effect of PL on costs in the ongoing task for categorical targets (Experiment 2), but not for specific targets (Experiment 1). RL and OTL both affected remembering the retrospective component of the prospective memory task. We suggest that PL can enhance costs in the ongoing task due to additional monitoring requirements. RL and OTL seem to impact the division of resources between the ongoing task and retrieval of the retrospective component, which may affect disengagement from the ongoing task. In general, the results demonstrate that the different types of load affect prospective memory differentially.

Deep Neural Network Based Demand Side Short Term Load Forecasting

Directory of Open Access Journals (Sweden)

Seunghyoung Ryu

2016-12-01

Full Text Available In the smart grid, one of the most important research areas is load forecasting; it spans from traditional time series analyses to recent machine learning approaches and mostly focuses on forecasting aggregated electricity consumption. However, the importance of demand side energy management, including individual load forecasting, is becoming critical. In this paper, we propose deep neural network (DNN-based load forecasting models and apply them to a demand side empirical load database. DNNs are trained in two different ways: a pre-training restricted Boltzmann machine and using the rectified linear unit without pre-training. DNN forecasting models are trained by individual customer’s electricity consumption data and regional meteorological elements. To verify the performance of DNNs, forecasting results are compared with a shallow neural network (SNN, a double seasonal Holt–Winters (DSHW model and the autoregressive integrated moving average (ARIMA. The mean absolute percentage error (MAPE and relative root mean square error (RRMSE are used for verification. Our results show that DNNs exhibit accurate and robust predictions compared to other forecasting models, e.g., MAPE and RRMSE are reduced by up to 17% and 22% compared to SNN and 9% and 29% compared to DSHW.

Invitro Assessment of Bacteriostatic Potency of Egg Yolk Immunoglobulin against Escherichia coli

Directory of Open Access Journals (Sweden)

Vikrama Chakravarthi. P1

Full Text Available The present study was carried out in commercial layer chickens to assess the bacteriostatic potency of egg yolk immunoglobulin IgY against food poisoning pathogen. The O antigen of food poisoning pathogen Escherichia coli was prepared and used to immunize commercial layer chickens. The eggs which contain anti-E.Coli IgY was collected on 30 th day of first injection and stored at 4 0 C. The antibacterial IgY was separated by water dilution method (10 times diluted with distilled water, pH 5.0 - 5.5, incubated at 4 0 C for 6 hrs and purified by 60 % ammonium sulphate. The recovery of IgY was in range of 57-62 %. The pathogens in Tryptic soya broth (approx. 6X108/ ml were cultured with anti-E.coli IgY @ 20 mg /ml and inhibitory effect was measured in UV spectrophotometer at 550 nm. The resultant growth curve indicated that the application of polyclonal antibodies (Ig Y on meat could be used to prevent the E.coli food poisoning. [Veterinary World 2010; 3(10.000: 460-462

Feeding different levels of vitamin E and selenium has no effect on serum immunoglobulin Y (IgY production by layers vaccinated against Escherichia coli and avian encephalomyelitis virus Alimentação com diferentes níveis de vitamina E e selênio não influencia a produção de imunoglobulina Y (IgY no soro de poedeiras leves vacinadas contra Escherichia coli e encefalomielite aviária

Directory of Open Access Journals (Sweden)

Giselle Kindlein

2007-10-01

Full Text Available The effects of vitamin E and selenium (Se supplementation on the immunity of hens vaccinated against a mixture of six swine-pathogenic Escherichia coli (EC and avian encephalomyelitis virus (AEV were studied. Antibody production (AbP was evaluated in ninety 49 to 57-week-old H&N Nick Chick hens fed diets containing 14IU Vitamin E kg-1 (basal diet, 27, 59, 111, or 111IU vitamin E kg-1 + 0.56ppm Se supplementation. At 51 wks of age, half of the hens were vaccinated against EC, and all birds were vaccinated against AEV. At 53-weeks of age, the birds received a second dose of EC vaccine. Blood samples were collected weekly and serum was analyzed by ELISA for anti-EC IgY and was expressed as optical density (OD. Vaccinated hens had higher serum OD than the non-vaccinated hens (P£0.05. Vaccinated hens fed 27 and 59IU of vitamin E/kg had a higher (POs efeitos da suplementação de vitamina E e Selênio (Se na imunidade de galinhas vacinadas contra uma mistura de 6 sorotipos patogênicos de Escherichia coli (EC e o vírus da encefalomielite aviária (VEA foram estudados. A produção de anticorpos foi avaliada em galinhas H&N Nick Chick durante a 49a e 57a semanas de vida. As aves foram alimentadas com dietas contendo 14UI de Vitamina E kg-1 (dieta basal, 27, 59, 111 e 111UI de Vitamina E kg-1 + 0,56ppm Se suplementar. Às 51 semanas de idade, metade das galinhas foi vacinada contra EC, e todas as aves foram vacinadas contra VEA. Às 53 semanas, as aves receberam a segunda vacina contra EC. Amostras de sangue foram coletadas semanalmente e o soro foi analisado por ELISA para anti-EC IgY e expresso como densidade óptica (DO. Galinhas vacinadas tiveram maior DO do que as não-vacinadas (P<0,05. Aves vacinadas que receberam 27 e 59 UI de vitamina E/kg tiveram maior DO do soro (P<0,05 do que as alimentadas com 111 UI + Se. Os antígenos utilizados mostraram não ser modelos satisfatórios para estudar a influência de micronutrientes na resposta imune de

Optimization of scintillator loading with the tellurium-130 isotope for long-term stability

Science.gov (United States)

Duhamel, Lauren; Song, Xiaoya; Goutnik, Michael; Kaptanoglu, Tanner; Klein, Joshua; SNO+ Collaboration

2017-09-01

Tellurium-130 was selected as the isotope for the SNO + neutrinoless double beta decay search, as 130Te decays to 130Xe via double beta decay. Linear alkyl benzene(LAB) is the liquid scintillator for the SNO + experiment. To load tellurium into scintillator, it is combined with 1,2-butanediol to form an organometallic complex, commonly called tellurium butanediol (TeBD). This study focuses on maximizing the percentage of tellurium loaded into scintillator and evaluates the complex's long-term stability. Studies on the effect of nucleation due to imperfections in the detector's surface and external particulates were employed by filtration and induced nucleation. The impact of water on the stability of TeBD complex was evaluated by liquid-nitrogen sparging, variability in pH and induced humidity. Alternative loading methods were evaluated, including the addition of stability-inducing organic compounds. Samples of tellurium-loaded scintillator were synthesized, treated, and consistently monitored in a controlled environment. It was found that the hydronium ions cause precipitation in the loaded scintillator, demonstrating that water has a detrimental effect on long-term stability. Optimization of loaded scintillator stability can contribute to the SNO + double beta decay search.

Production, characterization and applications for Toxoplasma gondii-specific polyclonal chicken egg yolk immunoglobulins.

Directory of Open Access Journals (Sweden)

Álvaro Ferreira Júnior

Full Text Available Toxoplasma gondii may cause abortions, ocular and neurological disorders in warm-blood hosts. Immunized mammals are a wide source of hyperimmune sera used in different approaches, including diagnosis and the study of host-parasite interactions. Unfortunately, mammalian antibodies present limitations for its production, such as the necessity for animal bleeding, low yield, interference with rheumatoid factor, complement activation and affinity to Fc mammalian receptors. IgY antibodies avoid those limitations; therefore they could be an alternative to be applied in T. gondii model.In this study we immunized hens with soluble tachyzoite antigens of T. gondii (STAg and purified egg yolk antibodies (IgY by an inexpensive and simple method, with high yield and purity degree. IgY anti-STAg antibodies presented high avidity and were able to recognize a broad range of parasite antigens, although some marked differences were observed in reactivity profile between antibodies produced in immunized hens and mice. Interestingly, IgY antibodies against Neospora caninum and Eimeria spp. did not react to STAg. We also show that IgY antibodies were suitable to detect T. gondii forms in paraffin-embedded sections and culture cell monolayers.Due to its cost-effectiveness, high production yield and varied range of possible applications, polyclonal IgY antibodies are useful tools for studies involving T. gondii.

The Ability of Immunoglobulin Yolk Recognized the Antigen in the Tissue of Ascaridia galli

Directory of Open Access Journals (Sweden)

Darmawi

2012-12-01

Full Text Available Antigen-antibody reaction is an important tool for the analysis of localization of target molecules, including antigenic protein within worm tissues. The purpose of the present research was to demonstrate the ability of immunoglobulin yolk (IgY anti-excretory/secretory recognized the antigen in the tissue of Ascaridia galli by mean of immunohistochemistry method. The excretory/secretory protein was procured from A. galli and concentrated by mean of vivaspin 30,000 MWCO. IgY was produced by egg yolks of immunized chickens with excretory/secretory, and purified using fast protein liquid chromatography (FPLC method. A. galli adult worms were cut in transversal and longitudinal section of the center and anterior region. Slides were incubated with both primary IgY for overnight at 4 oC and secondary antibody rabbit anti-chicken IgY HRP-conjugate for one hour at room temperature. The slides were stained with 3-amino, 9-ethylcarbazole (AEC chromogen, counterstained with Lillie Mayer Haematoxylin, and mounted in glyserin aqueous mount. Antigen-antibody reaction was investigated under a microscope. The result showed that antigen was appeared in the tissues such as cuticle, epicuticle, buccal cavity, and eggs inside the uterine of A. galli. This research concluded that IgY stimulated by the excretory/secretory was able to recognized the antigen scattered in the tissues of A. galli so the IgY could be applied for immunodiagnostic.

PERCENTAGE OF VIABLE SPERMATOZOA COLLECTED FROM THE EPIDIDYMES OF DEATH LOCAL DOG

Directory of Open Access Journals (Sweden)

I Nyoman Sulabda

2012-11-01

Full Text Available The purpose of this study to determine the effectof post mortem time on percentage of lifeepididymessperm from postmortem dog caudae epididymides. A total of 9 dog were usedand divided into three group. T0 was control group, T1, 3 hours postmortem and T2, 6hours postmortem. This way, samples were obtained at different times postmortem. Spermwere extracted from the caudae epididymes by means of cuts.The result showed that the percentage of life sperm were 67,16 ± 5.67(T0, 46.33 ± 5.60(T1 and 24.00 ± 4.35 respectively. We could appreciate that percentage of life wasaffected by postmortem time. There was significant decrease life sperm recovered fromepididymes postmortem (P<0.01. In conclusion, epididymes sperm from dog undergodecrease of percentage of life, but it could stay acceptable within many hours postmortem.We intepreted these data to indicate that it may still be possible to obtain viablespermatozoa many hours later.

SEASONAL CHANGES IN PHOSPHORUS LOAD FLOWING OUT OF SMALL AGRICULTURAL CATCHMENTS

Directory of Open Access Journals (Sweden)

Krzysztof Pulikowski

2014-12-01

Full Text Available In this article distribution of monthly phosphorus loads flowing out of two agricultural catchments which are located in different physiographic conditions of Lower Silesia was analysed. Loads of phosphorus runoff from the catchment located in the piedmont part of Lower Silesia in each month rarely exceed 0.10 kg P ∙ ha-1. The size of annual load is determined by loads obtained in two months of early spring. Much lower loads obtained for lowland catchment, located near Wroclaw. Values ​​calculated for each month rarely exceed the value of 0.01 kg P ∙ ha-1. Culmination of loads bringing away is a bit more extended in a time compared to the catchment located on Sudety Mts. Foreland. Much higher loads are observed during the period from January to April – this period has a major impact on the size of phosphorus load that flows out from this catchment during whole hydrological year. The obtained results clearly indicate that the threat of watercourses and water reservoirs supply in phosphorus compounds from agricultural land is periodic and it is particularly high during early spring. Phosphorus load flowing out from the analyzed catchments is very diverse. From facility located on Sudety Foothill in hydrological year, during research period, flowed away average 0.81 kg P ∙ ha-1. Significantly lower values were obtained for second facility and it was average 0.15 kg P ∙ ha-1 during a year. The size of load discharged during a year is largely determined by amount of phosphorus load flowing out during winter half of the year (from XI to IV. In case of foothill catchment in this period flowed out average 0.56 kg P ∙ ha-1, which presents 69% of annual load and in lowland catchment this percentage was even slightly higher and was 73%.

7 CFR 987.44 - Free and restricted percentages.

Science.gov (United States)

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... applicable grade and size available to supply the trade demand for free dates of any variety is likely to be... effectuate the declared policy of the act, it shall recommend such percentages to the Secretary. If the...

Acoustic analysis with vocal loading test in occupational voice disorders: outcomes before and after voice therapy.

Science.gov (United States)

Niebudek-Bogusz, Ewa; Kotyło, Piotr; Politański, Piotr; Sliwińska-Kowalska, Mariola

2008-01-01

To assess the usefulness of acoustic analysis with vocal loading test for evaluating the treatment outcomes in occupational voice disorders. Fifty-one female teachers with dysphonia were examined (Voice Handicap Index--VHI, laryngovideostroboscopy and acoustic analysis with vocal loading) before and after treatment. The outcomes of teachers receiving vocal training (group I) were referred to outcomes of group II receiving only voice hygiene instructions. The results of subjective assessment (VHI score) and objective evaluation (acoustic analysis) improved more significantly in group I than in group II. The post-treatment examination revealed a decreased percentage of subjects with deteriorated jitter parameters after vocal loading, particularly in group I. Acoustic analysis with vocal loading test can be a helpful tool in the diagnosis and evaluation of treatment efficacy in occupational dysphonia.

Behaviour of Epoxy Silica Nanocomposites Under Static and Creep Loading

Science.gov (United States)

Constantinescu, Dan Mihai; Picu, Radu Catalin; Sandu, Marin; Apostol, Dragos Alexandru; Sandu, Adriana; Baciu, Florin

2017-12-01

Specific manufacturing technologies were applied for the fabrication of epoxy-based nanocomposites with silica nanoparticles. For dispersing the fillers in the epoxy resin special equipment such as a shear mixer and a high energy sonicator with temperature control were used. Both functionalized and unfunctionalized silica nanoparticles were added in three epoxy resins. The considered filling fraction was in most cases 0.1, 0.3 and 0.5 wt%.. The obtained nanocomposites were subjected to monotonic uniaxial and creep loading at room temperature. The static mechanical properties were not significantly improved regardless the filler percentage and type of epoxy resin. Under creep loading, by increasing the stress level, the nanocomposite with 0.1 wt% silica creeps less than all other materials. Also the creep rate is reduced by adding silica nanofillers.

Estimates of Radionuclide Loading to Cochiti Lake from Los Alamos Canyon Using Manual and Automated Sampling

Energy Technology Data Exchange (ETDEWEB)

McLean, Christopher T. [Univ. of New Mexico, Albuquerque, NM (United States)

2000-07-01

Los Alamos National Laboratory has a long-standing program of sampling storm water runoff inside the Laboratory boundaries. In 1995, the Laboratory started collecting the samples using automated storm water sampling stations; prior to this time the samples were collected manually. The Laboratory has also been periodically collecting sediment samples from Cochiti Lake. This paper presents the data for Pu-238 and Pu-239 bound to the sediments for Los Alamos Canyon storm water runoff and compares the sampling types by mass loading and as a percentage of the sediment deposition to Cochiti Lake. The data for both manual and automated sampling are used to calculate mass loads from Los Alamos Canyon on a yearly basis. The automated samples show mass loading 200- 500 percent greater for Pu-238 and 300-700 percent greater for Pu-239 than the manual samples. Using the mean manual flow volume for mass loading calculations, the automated samples are over 900 percent greater for Pu-238 and over 1800 percent greater for Pu-239. Evaluating the Pu-238 and Pu-239 activities as a percentage of deposition to Cochiti Lake indicates that the automated samples are 700-1300 percent greater for Pu- 238 and 200-500 percent greater for Pu-239. The variance was calculated by two methods. The first method calculates the variance for each sample event. The second method calculates the variances by the total volume of water discharged in Los Alamos Canyon for the year.

Epithelium percentage estimation facilitates epithelial quantitative protein measurement in tissue specimens.

Science.gov (United States)

Chen, Jing; Toghi Eshghi, Shadi; Bova, George Steven; Li, Qing Kay; Li, Xingde; Zhang, Hui

2013-12-01

The rapid advancement of high-throughput tools for quantitative measurement of proteins has demonstrated the potential for the identification of proteins associated with cancer. However, the quantitative results on cancer tissue specimens are usually confounded by tissue heterogeneity, e.g. regions with cancer usually have significantly higher epithelium content yet lower stromal content. It is therefore necessary to develop a tool to facilitate the interpretation of the results of protein measurements in tissue specimens. Epithelial cell adhesion molecule (EpCAM) and cathepsin L (CTSL) are two epithelial proteins whose expressions in normal and tumorous prostate tissues were confirmed by measuring staining intensity with immunohistochemical staining (IHC). The expressions of these proteins were measured by ELISA in protein extracts from OCT embedded frozen prostate tissues. To eliminate the influence of tissue heterogeneity on epithelial protein quantification measured by ELISA, a color-based segmentation method was developed in-house for estimation of epithelium content using H&E histology slides from the same prostate tissues and the estimated epithelium percentage was used to normalize the ELISA results. The epithelium contents of the same slides were also estimated by a pathologist and used to normalize the ELISA results. The computer based results were compared with the pathologist's reading. We found that both EpCAM and CTSL levels, measured by ELISA assays itself, were greatly affected by epithelium content in the tissue specimens. Without adjusting for epithelium percentage, both EpCAM and CTSL levels appeared significantly higher in tumor tissues than normal tissues with a p value less than 0.001. However, after normalization by the epithelium percentage, ELISA measurements of both EpCAM and CTSL were in agreement with IHC staining results, showing a significant increase only in EpCAM with no difference in CTSL expression in cancer tissues. These results

Total and Lower Extremity Lean Mass Percentage Positively Correlates With Jump Performance.

Science.gov (United States)

Stephenson, Mitchell L; Smith, Derek T; Heinbaugh, Erika M; Moynes, Rebecca C; Rockey, Shawn S; Thomas, Joi J; Dai, Boyi

2015-08-01

Strength and power have been identified as valuable components in both athletic performance and daily function. A major component of strength and power is the muscle mass, which can be assessed with dual-energy x-ray absorptiometry (DXA). The primary purpose of this study was to quantify the relationship between total body lean mass percentage (TBLM%) and lower extremity lean mass percentage (LELM%) and lower extremity force/power production during a countermovement jump (CMJ) in a general population. Researchers performed a DXA analysis on 40 younger participants aged 18-35 years, 28 middle-aged participants aged 36-55 years, and 34 older participants aged 56-75 years. Participants performed 3 CMJ on force platforms. Correlations revealed significant and strong relationships between TBLM% and LELM% compared with CMJ normalized peak vertical ground reaction force (p lean mass percentages. The findings have implications in including DXA-assessed lean mass percentage as a component for evaluating lower extremity strength and power. A paired DXA analysis and CMJ jump test may be useful for identifying neuromuscular deficits that limit performance.

Optimum Design of FGX-CNT-Reinforced Reddy Pipes Conveying Fluid Subjected to Moving Load

Directory of Open Access Journals (Sweden)

Farid Vakili Tahami

2016-12-01

Full Text Available The harmony search algorithm is applied to the optimum designs of functionally graded (FG-carbon nanotubes (CNTs-reinforced pipes conveying fluid which are subjected to a moving load. The structure is modeled by the Reddy cylindrical shell theory, and the motion equations are derived by Hamilton's principle. The dynamic displacement of the system is derived based on the differential quadrature method (DQM. Moreover, the length, thickness, diameter, velocity, and acceleration of the load, the temperature and velocity of the fluid, and the volume fraction of CNT are considered for the design variables. The results illustrate that the optimum diameter of the pipe is decreased by increasing the volume percentage of CNTs. In addition, by increasing the moving load velocity and acceleration, the FS is decreased.

Ground-water discharge and base-flow nitrate loads of nontidal streams, and their relation to a hydrogeomorphic classification of the Chesapeake Bay Watershed, middle Atlantic Coast

Science.gov (United States)

Bachman, L. Joseph; Lindsey, Bruce D.; Brakebill, John W.; Powars, David S.

1998-01-01

Existing data on base-flow and groundwater nitrate loads were compiled and analyzed to assess the significance of groundwater discharge as a source of the nitrate load to nontidal streams of the Chesapeake Bay watershed. These estimates were then related to hydrogeomorphic settings based on lithology and physiographic province to provide insight on the areal distribution of ground-water discharge. Base-flow nitrate load accounted for 26 to about 100 percent of total-flow nitrate load, with a median value of 56 percent, and it accounted for 17 to 80 percent of total-flow total-nitrogen load, with a median value of 48 percent. Hydrograph separations were conducted on continuous streamflow records from 276 gaging stations within the watershed. The values for base flow thus calculated were considered an estimate of ground-water discharge. The ratio of base flow to total flow provided an estimate of the relative importance of ground-water discharge within a basin. Base-flow nitrate loads, total-flow nitrate loads, and total-flow total-nitrogen loads were previously computed from water-quality and discharge measurements by use of a regression model. Base-flow nitrate loads were available from 78 stations, total-flow nitrate loads were available from 86 stations, and total-flow total-nitrogen loads were available for 48 stations. The percentage of base-flow nitrate load to total-flow nitrate load could be computed for 57 stations, whereas the percentage of base-flow nitrate load to totalflow total-nitrogen load could be computed for 36 stations. These loads were divided by the basin area to obtain yields, which were used to compare the nitrate discharge from basins of different sizes. The results indicate that ground-water discharge is a significant source of water and nitrate to the total streamflow and nitrate load. Base flow accounted for 16 to 92 percent of total streamflow at the 276 sampling sites, with a median value of 54 percent. It is estimated that of the 50

Domestic smoke exposure is associated with alveolar macrophage particulate load.

Science.gov (United States)

Fullerton, Duncan G; Jere, Khuzwayo; Jambo, Kondwani; Kulkarni, Neeta S; Zijlstra, Eduard E; Grigg, Jonathan; French, Neil; Molyneux, Malcolm E; Gordon, Stephen B

2009-03-01

Indoor air pollution is associated with impaired respiratory health. The pre-dominant indoor air pollutant to which two billion of the world's population is exposed is biomass fuel smoke. We tested the hypothesis that reported smoke exposure in men and women is associated with increased alveolar macrophage uptake of biomass smoke particulates. Healthy volunteers attending for research bronchoscopy in Malawi completed a questionnaire assessment of smoke exposure. Particulate matter visible in alveolar macrophages (AM) was quantified using digital image analysis. The geometric mean of the percentage area of the cytoplasm occupied by particulates in 50 cover-slip adherent AM was calculated and termed particulate load. In 57 subjects (40 men and 17 women) there was a significant difference between the particulate load in groups divided according to pre-dominant lighting form used at home (ANOVA P = 0.0009) and type of cooking fuel (P = 0.0078). Particulate load observed in macrophages is associated with the reported type of biomass fuel exposure. Macrophage function in relation to respiratory health should now be investigated in biomass smoke exposed subjects.

Preparation of lumen-loaded kenaf pulp with magnetite (Fe{sub 3}O{sub 4})

Energy Technology Data Exchange (ETDEWEB)

Zakaria, S.; Ong, B.H.; Ahmad, S.H.; Abdullah, M.; Yamauchi, T

2005-02-15

Magnetic pulps were prepared from unbleached kenaf (hibiscus cannabinus L.) kraft pulps. Fe{sub 3}O{sub 4} or magnetite powder was used to load into the pulp's lumen and pit. Aluminum sulphate [Al{sub 2}(SO{sub 4}){sub 3}] (alum) and polyethylenimine (PEI), both mainly function as retention aid were used throughout the experiment and found to be beneficial in the preparation of this magnetic pulps. The ash content method was used to determine the amount of magnetite retained in the lumen and pit. The utilization of PEI up to 2% per pulp fibres was found to be the best result on lumen loading. The deposition of magnetite powder in lumen and pit is found decrease as the addition of PEI used is more than 2% per pulp fibres. Scanning electron microscope (SEM) clearly shows the distribution of magnetite deposited in the lumen. Tensile index and folding endurance of the loaded fibre decreased slightly as the percentage of loading pigment increased.

Generation and characterization of chicken egg yolk antibodies against propionibacterium acnes for the prevention of acne vulgaris

Directory of Open Access Journals (Sweden)

Karthika Selvan

2012-01-01

Full Text Available Introduction: Antigen-specific antibody has been widely used for immunological analysis in the field of diagnosis as well as in pure scientific research, where the IgY antibodies can be raised against P acnes antigen. Material and Methods: To produce IgY against Propionibacterium acnes, laying hens were immunized with P acnes (MTCC No: 1951 and subsequent booster injections were given. The antibodies produced were purified from the egg yolk of immunized chicken using the polyethylene glycol and ammonium sulfate precipitation method and, further, by Diethylaminoethyl (DEAE cellulose ion-exchange column chromatography. The protein fraction of IgY was isolated from the egg yolk. The separation was rapid, and the success of each step was viewed on Sodium Dodecyl Sulphate-polyacrylamide gel electrophoresis (SDS-PAGE. The reactivity of anti-P acnes was evaluated by the Enzyme-linked immunosorbent assay (ELISA test and the dot-immunoassay. Results: With ELISA, the highest titter of 1:10000 was observed on the 150 th day after vaccination. The results of dot-immunoassay suggested that anti-P acnes IgY developed a brown color as positive reaction, which showed the antigen-antibody binding even after a maximum dilution of 1/500. These results suggest that anti-acne IgY was produced and had strong specific antibody reactivity. Conclusion: The findings indicate that anti-acne IgY is worth utilizing as a preventive agent for acne vulgaris.

POTENSI NETRALISASI IMUNOGLOBULIN Y ANTITETANUS YANG DIISOLASI DARI TELUR AYAM (THE POTENCY NETRALIZATION OF ANTI TETANUS IMMUNOGLOBULIN Y THAT WERE ISOLATED FROM CHICKEN EGGS

Directory of Open Access Journals (Sweden)

I Nyoman Suartha

2007-06-01

Full Text Available The porpuse of study was to explore the potential use of? anti tetanus IgY from eggs yolk as a substitute for anti tetanus serum raised in ?horses. The eggs were collected from chickens which have previously been immunized with tetanus toxoid. Neutralization potency test of anti tetanus IgY determined by ?Spearman-Karber method.? The highest mean titer of anti tetanus of egg yolk was 80.16 ? 33.55 IU/ml and the lowest was 1.69 ? 0.63 IU/ml. The concentration? of purified IgY was 1.644 ? 0.424 mg/ml. Spearman-Karber value of potency of anti tetanus IgY are 35 IU/ml. ?This research concluded that Chickens was capable of produced of anti tetanus in eggs yolk with value of potency are 35 IU/ml.

Effect of inoculation route on the production of antibodies and histological characteristics of the spleen in laying hens

Directory of Open Access Journals (Sweden)

SF Eto

2012-03-01

Full Text Available Recent studies have reported the use of IgY antibody in the prevention or treatment of diseases in animals. IgY can be obtained in large amounts from the yolk of chicken eggs through a low-cost process. This study evaluated the effect of different routes of inoculation on antibody production and spleen morphological characteristics of laying hens (White Leghorn inoculated with sheep red blood cells. The analysis of the results showed that the intramuscular route is the most efficient for total antibody production in the primary immune response, while the intravenous route is the most efficient in producing IgY antibodies in the secondary immune response. No histological changes were observed in the spleen of laying hens. This study could be useful for developing protocols of antigen inoculation in laying hens for IgY antibody production.

Using immunoglobulin Y as an alternative antibody for the detection of hepatitis A virus in frozen liver sections

Directory of Open Access Journals (Sweden)

Gentil Arthur Bentes

2015-06-01

Full Text Available An increasing amount of research has been conducted on immunoglobulin Y (IgY because the use of IgY offers several advantages with respect to diagnostic testing, including its easy accessibility, low cost and translatability to large-scale production, in addition to the fact that it can be ethically produced. In a previous work, immunoglobulin was produced and purified from egg yolks (IgY reactive to hepatitis A virus (HAV antigens. In the present work, this anti-HAV-specific IgY was used in an indirect immunofluorescence assay to detect viral antigens in liver biopsies that were obtained from experimentally infected cynomolgus monkeys. Fields that were positive for HAV antigen were detected in liver sections using confocal microscopy. In conclusion, egg yolks from immunised hens may be a reliable source for antibody production, which can be employed for immunological studies.

High Level Waste (HLW) Processing Experience with Increased Waste Loading

International Nuclear Information System (INIS)

JANTZEN, CAROL

2004-01-01

The Defense Waste Processing Facility (DWPF) Engineering requested characterization of glass samples that were taken after the second melter had been operational for about 5 months. After the new melter had been installed, the waste loading had been increased to about 38 weight percentage after a new quasicrystalline liquidus model had been implemented. The DWPF had also switched from processing with refractory Frit 200 to a more fluid Frit 320. The samples were taken after DWPF observed very rapid buildup of deposits in the upper pour spout bore and on the pour spout insert while processing the high waste loading feedstock. These samples were evaluated using various analytical techniques to determine the cause of the crystallization. The pour stream sample was homogeneous, amorphous, and representative of the feed batch from which it was derived. Chemical analysis of the pour stream sample indicated that a waste loading of 38.5 weight per cent had been achieved. The data analysis indicated that surface crystallization, induced by temperature and oxygen fugacity gradients in the pour spout, caused surface crystallization to occur in the spout and on the insert at the higher waste loadings even though there was no crystallization in the pour stream

Load management as a smart grid concept for sizing and designing of hybrid renewable energy systems

Science.gov (United States)

Eltamaly, Ali M.; Mohamed, Mohamed A.; Al-Saud, M. S.; Alolah, Abdulrahman I.

2017-10-01

Optimal sizing of hybrid renewable energy systems (HRES) to satisfy load requirements with the highest reliability and lowest cost is a crucial step in building HRESs to supply electricity to remote areas. Applying smart grid concepts such as load management can reduce the size of HRES components and reduce the cost of generated energy considerably. In this article, sizing of HRES is carried out by dividing the load into high- and low-priority parts. The proposed system is formed by a photovoltaic array, wind turbines, batteries, fuel cells and a diesel generator as a back-up energy source. A smart particle swarm optimization (PSO) algorithm using MATLAB is introduced to determine the optimal size of the HRES. The simulation was carried out with and without division of the load to compare these concepts. HOMER software was also used to simulate the proposed system without dividing the loads to verify the results obtained from the proposed PSO algorithm. The results show that the percentage of division of the load is inversely proportional to the cost of the generated energy.

Assessment of the behavior of reinforced concrete beams retrofitted with pre-stressed CFPR subjected to cyclic loading

Science.gov (United States)

Hojatkashani, Ata; Zanjani, Sara

2018-03-01

Rehabilitation of weak and damaged structures has been considered widely during recent years. A relatively modern way of strengthening concrete components is to confine parts under tension and shear by means of carbon fiber reinforce polymer (CFRP). This way of strengthening due to the conditions of composite materials such as light weight, linear elastic behavior until failure point, high tensile strength, high elastic modulus, resistance against corrosion, and high fatigue resistance has become so common. During structural strengthening by means of not pre-stressed FRP materials, usually, it is not possible to benefit from the maximum capacity of FRP materials. In addition, sometimes, the expensive cost of such materials will not make a suitable balance between rates of strengthening and consuming spending. Thus, pre-stressing CFRP materials has an undeniable role in the effective use of materials. In the current research, general procedure of simulation using finite-element method (FEM) by means of the numerical package ABAQUS has been presented. In this article, 12 reinforced concrete (RC) models in two states (strengthened with simple and pre-stressed CFRP) under cycling loading have been considered. A parametric study has been carried out in this research on the effects of parameters such as CFRP surface area, percentage of tensile steel rebar and pre-stressing stress on ultimate load carrying capacity (ULCC), stiffness, and the ability of depreciation energy for the samples. In the current article also, for design parameters, percentages of tensile steel rebars, surface area of CFPR sheets, and the effective pre-stressing stress in RC beams retrofitted with pre-stressed CFPR sheets have investigated. In this paper, it was investigated that using different amount of parameters such as steel rebar percentage, CFRP surface area percentage, and CFRP pre-stressing, the resulted ULCC and energy depreciation of the specimens was observed to be increasing and

Quantitative trait locus (QTL) analysis of percentage grains ...

African Journals Online (AJOL)

user

2011-03-28

Mar 28, 2011 ... ATA/M-CGT; (B) AFLP results using primer E-AAA/M-CTC; (C) AFLP results using primer E-AAA/M-CTA. 1,. Minghui63; 2, Zhengshan97A; 3, low PGC bulk; 4, high PGC bulk. The arrow show linkage segments of percentage chalky grain in rice. Table 1. Chromosomal location of AFLP segments linked to ...

Peak load demand forecasting using two-level discrete wavelet decomposition and neural network algorithm

Science.gov (United States)

Bunnoon, Pituk; Chalermyanont, Kusumal; Limsakul, Chusak

2010-02-01

This paper proposed the discrete transform and neural network algorithms to obtain the monthly peak load demand in mid term load forecasting. The mother wavelet daubechies2 (db2) is employed to decomposed, high pass filter and low pass filter signals from the original signal before using feed forward back propagation neural network to determine the forecasting results. The historical data records in 1997-2007 of Electricity Generating Authority of Thailand (EGAT) is used as reference. In this study, historical information of peak load demand(MW), mean temperature(Tmean), consumer price index (CPI), and industrial index (economic:IDI) are used as feature inputs of the network. The experimental results show that the Mean Absolute Percentage Error (MAPE) is approximately 4.32%. This forecasting results can be used for fuel planning and unit commitment of the power system in the future.

Effect of embryo culture media on percentage of males at birth.

Science.gov (United States)

Zhu, Jinliang; Zhuang, Xinjie; Chen, Lixue; Liu, Ping; Qiao, Jie

2015-05-01

Does embryo culture medium influence the percentage of males at birth? The percentage of males delivered after ICSI cycles using G5™ medium was statistically significantly higher than after cycles where Global, G5™ PLUS, and Quinn's Advantage Media were used. Male and female embryos have different physiologies during preimplantation development. Manipulating the energy substrate and adding growth factors have a differential impact on the development of male and female embryos. This was a retrospective analysis of the percentage of males at birth, and included 4411 singletons born from fresh embryo transfer cycles between January 2011 and August 2013 at the Center for Reproductive Medicine of Third Hospital Peking University. Only singleton gestations were included. Participants were excluded if preimplantation genetic diagnosis, donor oocytes and donor sperm were used. The database between January 2011 and August 2013 was searched with unique medical record number, all patients were present in the database with only one cycle. Demographics, cycle characteristics and the percentage of male babies in the four culture media groups were compared with analysis of variance or χ(2) tests. Multivariable logistic regression was done to determine the association between the sex at birth and culture media after adjusting for other confounding factors, including parental age, parental BMI, type of infertility, parity, number of embryos transferred, number of early gestational sacs, cycles with testicular sperm aspiration (TESA)/percutaneous epididymal sperm aspiration (PESA)/testicular sperm extraction (TESE), number of oocytes retrieved, cycles with blastocyst transfers, and gestational age within ICSI group. Within the IVF group, the percentage of males at birth for G5™, Global, Quinn's and G5™ PLUS media were comparable (P > 0.05); however, within the ICSI group, the percentage of male babies in cycles using G5™(56.1%) was statistically significantly higher than

A study on the optimal hydraulic loading rate and plant ratios in recirculation aquaponic system.

Science.gov (United States)

Endut, Azizah; Jusoh, A; Ali, N; Wan Nik, W B; Hassan, A

2010-03-01

The growths of the African catfish (Clarias gariepinus) and water spinach (Ipomoea aquatica) were evaluated in recirculation aquaponic system (RAS). Fish production performance, plant growth and nutrient removal were measured and their dependence on hydraulic loading rate (HLR) was assessed. Fish production did not differ significantly between hydraulic loading rates. In contrast to the fish production, the water spinach yield was significantly higher in the lower hydraulic loading rate. Fish production, plant growth and percentage nutrient removal were highest at hydraulic loading rate of 1.28 m/day. The ratio of fish to plant production has been calculated to balance nutrient generation from fish with nutrient removal by plants and the optimum ratio was 15-42 gram of fish feed/m(2) of plant growing area. Each unit in RAS was evaluated in terms of oxygen demand. Using specified feeding regime, mass balance equations were applied to quantify the waste discharges from rearing tanks and treatment units. The waste discharged was found to be strongly dependent on hydraulic loading rate. 2009 Elsevier Ltd. All rights reserved.

Artificial neural networks for prediction of percentage of water ...

Indian Academy of Sciences (India)

have high compressive strengths in comparison with con- crete specimens ... presenting suitable model based on artificial neural networks. (ANNs) to ... by experimental ones to evaluate the software power for pre- dicting the ..... Figure 7. Correlation of measured and predicted percentage of water absorption values of.

Comparative study on immunoglobulin Y transfer from breeding hens to egg yolk and progeny chicks in different breeds of poultry

Directory of Open Access Journals (Sweden)

Ritu Agrawal

2016-04-01

Full Text Available Aim: This study was undertaken to compare the immunoglobulin Y (IgY level and its efficacy in laying hens of four different breeds of poultry (viz.,Vanraja, Gramapriya, BlackRock, and KalingaBrown and its relative transfer in egg yolk and chick. Materials and Methods: This study was conducted in 48 apparently healthy laying hens vaccinated with Salmonella inactivated polyvalent vaccine, eggs and progeny chicks; 12 each from four different breeds of poultry,viz.,Vanraja, Gramapriya, BlackRock, and KalingaBrown. The methodology included measurement of egg and yolk weight, total protein and IgY in egg yolk, total serum protein and IgY in breeding hens, and progeny chicks and extent of IgY transfer from hens to yolk then to chicks. Further, Salmonella-specific antibodies in breeding hens, egg yolk and progeny chicks were assessed using O and H antigen by tube agglutination test. Results: The egg weight differed nonsignificantly (p>0.05 among breeds, however, breed wise significant variation (p0.05 difference among breed was found in total protein of egg yolk and chick. The IgY concentration in hens, egg yolk and chick was found to be in the range of 5.35±0.63- 5.83±0.65, 2.3±0.1-2.6±0.2, and 1.3±0.11-1.7±0.16 mg/ml, respectively which is uniform and independent of total protein concentration at all the three levels. Significant breed variations were not observed in maternal IgY transfer from breeding hens to chicks and were 25.62±1.42-36.06±4.34% of total IgY in parent flock. Moderate to higher rate of seroprevalence with peak titers of 1:640 against Salmonella-specific antibodies was observed in only 41.6% of breeding hens. Conclusion: No significant difference in the rate of transfer of IgY was observed in four breeds studied (viz.,Vanraja, Gramapriya, BlackRock, and KalingaBrown and moderate seropositivity was detected for Salmonella-specific antibodies in progeny chicks.

Prophylactic and therapeutic efficacy of avian antibodies against influenza virus H5N1 and H1N1 in mice.

Directory of Open Access Journals (Sweden)

Huan H Nguyen

Full Text Available BACKGROUND: Pandemic influenza poses a serious threat to global health and the world economy. While vaccines are currently under development, passive immunization could offer an alternative strategy to prevent and treat influenza virus infection. Attempts to develop monoclonal antibodies (mAbs have been made. However, passive immunization based on mAbs may require a cocktail of mAbs with broader specificity in order to provide full protection since mAbs are generally specific for single epitopes. Chicken immunoglobulins (IgY found in egg yolk have been used mainly for treatment of infectious diseases of the gastrointestinal tract. Because the recent epidemic of highly pathogenic avian influenza virus (HPAIV strain H5N1 has resulted in serious economic losses to the poultry industry, many countries including Vietnam have introduced mass vaccination of poultry with H5N1 virus vaccines. We reasoned that IgY from consumable eggs available in supermarkets in Vietnam could provide protection against infections with HPAIV H5N1. METHODS AND FINDINGS: We found that H5N1-specific IgY that are prepared from eggs available in supermarkets in Vietnam by a rapid and simple water dilution method cross-protect against infections with HPAIV H5N1 and related H5N2 strains in mice. When administered intranasally before or after lethal infection, the IgY prevent the infection or significantly reduce viral replication resulting in complete recovery from the disease, respectively. We further generated H1N1 virus-specific IgY by immunization of hens with inactivated H1N1 A/PR/8/34 as a model virus for the current pandemic H1N1/09 and found that such H1N1-specific IgY protect mice from lethal influenza virus infection. CONCLUSIONS: The findings suggest that readily available H5N1-specific IgY offer an enormous source of valuable biological material to combat a potential H5N1 pandemic. In addition, our study provides a proof-of-concept for the approach using virus

20 CFR 225.42 - Notice of the percentage amount of a cost-of-living increase.

Science.gov (United States)

2010-04-01

... THE RAILROAD RETIREMENT ACT PRIMARY INSURANCE AMOUNT DETERMINATIONS Cost-of-Living Increases § 225.42 Notice of the percentage amount of a cost-of-living increase. The percentage amount of the cost-of-living... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Notice of the percentage amount of a cost-of...

Artificial neural networks for prediction of percentage of water

Indian Academy of Sciences (India)

... Lecture Workshops · Refresher Courses · Symposia · Live Streaming. Home; Journals; Bulletin of Materials Science; Volume 35; Issue 6. Artificial neural networks for prediction of percentage of water absorption of geopolymers produced by waste ashes. Ali Nazari. Volume 35 Issue 6 November 2012 pp 1019-1029 ...

Relation Between Bitumen Content and Percentage Air Voids in Semi Dense Bituminous Concrete

Science.gov (United States)

Panda, R. P.; Das, Sudhanshu Sekhar; Sahoo, P. K.

2018-06-01

Hot mix asphalt (HMA) is a heterogeneous mix of aggregate, mineral filler, bitumen, additives and air voids. Researchers have indicated that the durability of the HMA is sensitive on the actual bitumen content and percentage air void. This paper aims at establishing the relationship between the bitumen content and the percentage air voids in Semi Dense Bituminous Concrete (SDBC) using Viscosity Grade-30 (VG-30) bitumen. Total 54 samples have been collected, for formulation and validation of relationship and observed that the percentage air voids increases with decrease in actual bitumen content and vice versa. A minor increase in percentage air voids beyond practice of designed air voids in Marshall Method of design is required for better performance, indicating a need for reducing the codal provision of minimum bitumen content for SDBC as specified in Specification for Road & Bridges (Fourth Revision) published by Indian Road Congress, 2001. The study shows a possibility of reducing designed minimum bitumen content from codal provision for SDBC by 0.2% of weight with VG-30 grade of Bitumen.

Relation Between Bitumen Content and Percentage Air Voids in Semi Dense Bituminous Concrete

Science.gov (United States)

Panda, R. P.; Das, Sudhanshu Sekhar; Sahoo, P. K.

2018-02-01

Hot mix asphalt (HMA) is a heterogeneous mix of aggregate, mineral filler, bitumen, additives and air voids. Researchers have indicated that the durability of the HMA is sensitive on the actual bitumen content and percentage air void. This paper aims at establishing the relationship between the bitumen content and the percentage air voids in Semi Dense Bituminous Concrete (SDBC) using Viscosity Grade-30 (VG-30) bitumen. Total 54 samples have been collected, for formulation and validation of relationship and observed that the percentage air voids increases with decrease in actual bitumen content and vice versa. A minor increase in percentage air voids beyond practice of designed air voids in Marshall Method of design is required for better performance, indicating a need for reducing the codal provision of minimum bitumen content for SDBC as specified in Specification for Road & Bridges (Fourth Revision) published by Indian Road Congress, 2001. The study shows a possibility of reducing designed minimum bitumen content from codal provision for SDBC by 0.2% of weight with VG-30 grade of Bitumen.

Theoretical distribution of load in the radius and ulna carpal joint.

Science.gov (United States)

Márquez-Florez, Kalenia; Vergara-Amador, Enrique; de Las Casas, Estevam Barbosa; Garzón-Alvarado, Diego A

2015-05-01

The purpose of this study is to validate a model for the analysis of the load distribution through the wrist joint, subjected to forces on the axes of the metacarpals from distal to proximal for two different mesh densities. To this end, the Rigid Body Spring Model (RBSM) method was used on a three-dimensional model of the wrist joint, simulating the conditions when making a grip handle. The cartilage and ligaments were simulated as springs acting under compression and tension, respectively, while the bones were considered as rigid bodies. At the proximal end of the ulna the movement was completely restricted, and the radius was allowed to move only in the lateral/medial direction. With these models, we found the load distributions on each carpal articular surface of radius. Additionally, the results show that the percentage of the applied load transmitted through the radius was about 86% for one mesh and 88% for the coarser one; for the ulna it was 21% for one mesh and 18% for the coarser. The obtained results are comparable with previous outcomes reported in prior studies. The latter allows concluding that, in theory, the methodology can be used to describe the changes in load distribution in the wrist. Copyright © 2015 Elsevier Ltd. All rights reserved.

Load balancing in highly parallel processing of Monte Carlo code for particle transport

International Nuclear Information System (INIS)

Higuchi, Kenji; Takemiya, Hiroshi; Kawasaki, Takuji

1998-01-01

In parallel processing of Monte Carlo (MC) codes for neutron, photon and electron transport problems, particle histories are assigned to processors making use of independency of the calculation for each particle. Although we can easily parallelize main part of a MC code by this method, it is necessary and practically difficult to optimize the code concerning load balancing in order to attain high speedup ratio in highly parallel processing. In fact, the speedup ratio in the case of 128 processors remains in nearly one hundred times when using the test bed for the performance evaluation. Through the parallel processing of the MCNP code, which is widely used in the nuclear field, it is shown that it is difficult to attain high performance by static load balancing in especially neutron transport problems, and a load balancing method, which dynamically changes the number of assigned particles minimizing the sum of the computational and communication costs, overcomes the difficulty, resulting in nearly fifteen percentage of reduction for execution time. (author)

Unequal-thickness billet optimization in transitional region during isothermal local loading forming of Ti-alloy rib-web component using response surface method

Directory of Open Access Journals (Sweden)

Ke WEI

2018-04-01

Full Text Available Avoiding the folding defect and improving the die filling capability in the transitional region are desired in isothermal local loading forming of a large-scale Ti-alloy rib-web component (LTRC. To achieve a high-precision LTRC, the folding evolution and die filling process in the transitional region were investigated by 3D finite element simulation and experiment using an equal-thickness billet (ETB. It is found that the initial volume distribution in the second-loading region can greatly affect the amount of material transferred into the first-loading region during the second-loading step, and thus lead to the folding defect. Besides, an improper initial volume distribution results in non-concurrent die filling in the cavities of ribs after the second-loading step, and then causes die underfilling. To this end, an unequal-thickness billet (UTB was employed with the initial volume distribution optimized by the response surface method (RSM. For a certain eigenstructure, the critical value of the percentage of transferred material determined by the ETB was taken as a constraint condition for avoiding the folding defect in the UTB optimization process, and the die underfilling rate was considered as the optimization objective. Then, based on the RSM models of the percentage of transferred material and the die underfilling rate, non-folding parameter combinations and optimum die filling were achieved. Lastly, an optimized UTB was obtained and verified by the simulation and experiment. Keywords: Die filling, Folding defect, Isothermal local loading forming, Transitional region, Unequal-thickness billet optimization

Analysis the percentage frequency to estimate Volleyball´s performance

Directory of Open Access Journals (Sweden)

Santiago Calero-Morales

2012-12-01

Full Text Available The study analyzes the percentage frequency as a mathematical model used to estimate the international volleyball performance. Based on the description of its practical objectives, the paper shows some positive and negative characteristics of the equation, characteristics that affect decision making by the coach. Three studies were conducted involving a population of 42 games in volleyball, men's youth category, 10 game of 13 possible belonging to the Final round of 2006 FIVB World League, and a ranked players in the qualifying phase of the 2006 World League with 48 games as population. The investigation determined that the percentage frequency is a simple computer model that defines a value perfectly isolated from reality, but does not model correctly all variables that significantly influence the final performance, creating false interpretations of reality.

The percentage of macrophage numbers in rat model of sciatic nerve crush injury

Directory of Open Access Journals (Sweden)

Satrio Wicaksono

2016-02-01

Full Text Available ABSTRACT Excessive accumulation of macrophages in sciatic nerve fascicles inhibits regeneration of peripheral nerves. The aim of this study is to determine the percentage of the macrophages inside and outside of the fascicles at the proximal, at the site of injury and at the distal segment of rat model of sciatic nerve crush injury. Thirty male 3 months age Wistar rats of 200-230 g were divided into sham-operation group and crush injury group. Termination was performed on day 3, 7, and 14 after crush injury. Immunohistochemical examination was done using anti CD68 antibody. Counting of immunopositive and immunonegative cells was done on three representative fields for extrafascicular and intrafascicular area of proximal, injury and distal segments. The data was presented as percentage of immunopositive cells. The percentage of the macrophages was significantly increased in crush injury group compared to the sham-operated group in all segments of the peripheral nerves. While the percentage of macrophages outside fascicle in all segments of sciatic nerve and within the fascicle in the proximal segment reached its peak on day 3, the percentage of macrophages within the fascicles at the site of injury and distal segments reached the peak later at day 7. In conclusions, accumulation of macrophages outside the nerve fascicles occurs at the beginning of the injury, and then followed later by the accumulation of macrophages within nerve fascicles

29 CFR 778.503 - Pseudo “percentage bonuses.”

Science.gov (United States)

2010-07-01

... such a scheme is artificially low, and the difference between the wages paid at the hourly rate and the... Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR STATEMENTS OF GENERAL... part, a true bonus based on a percentage of total wages—both straight time and overtime wages—satisfies...

An immunoenzymatic assay for the diagnosis of hepatitis A utilising immunoglobulin Y

Directory of Open Access Journals (Sweden)

Alexandre dos Santos da Silva

2012-11-01

Full Text Available The detection of anti-hepatitis A virus (HAV antibody levels by diagnostic kits in the convalescent period of disease generally use immunoglobulin G (IgG, which is expensive. An alternative to IgG is immunoglobulin Y (IgY, an immunoglobulin antibody encountered in birds and reptiles. The aim of this study was to develop a competitive immunoenzymatic assay to measure total anti-HAV antibody levels using anti-HAV IgY as the capture and conjugated immunoglobulins. For this purpose, anti-HAV IgY was conjugated to horseradish peroxidase (HRP and the optimal dilution of HRP-conjugated antibodies was evaluated to establish the competitive immuneenzymatic assay. The results obtained from our "in-house" assay were plotted on a receiver operator curve, which showed a sensitivity of 95% and a specificity of 98.8%, demonstrating that a competitive anti-HAV IgY immunoenzymatic assay developed "in house" could be used as an alternative to commercial assays that utilise IgG.

Is proBNP a Reliable Marker for the Evaluation of Fluid Load in Patients Undergoing Continuous Renal Replacement Therapy?

Directory of Open Access Journals (Sweden)

Seher Erdogan

2016-11-01

Full Text Available Aim: Pro-B type natriuretic peptide (proBNP has been defined as a volume marker in hemodialysis patients. In the present study we aimed to evaluate the role of serum proBNP levels to indicate fluid load in patients undergoing continuous renal replacement therapy (CRRT due to overhydration. Material and Method: Patients who were admitted to a tertiary 7-bed pediatric intensive care unit and underwent CRRT due to overhydration were included in the study. Results: The study was conducted with 15 girls (53.6% and 13 boys (46.4%. The mean age was 61.46±56.13 months (range, 2-183 months; the mean CRRT administration time was 20.8±14.9 hours (range, 5-60 hours; and the mean percentage of fluid extracted from the body was 8.43 ± 4.51% (range, 2.5-20%. CRRT was administered to 12 patients because of fluid overload (42.9% and to 12 (57.1% because of fluid load accompanied by uremia.. There was a statistically significant difference between body weight, urea, and creatinine levels of patients before and after treatment (p= 0.001. The mean proBNP level was 23.306 ± 13.943 pg/mL immediately before CRRT and the mean proBNP after CRRT was 22.178 ± 15.473 pg/mL. There was no statistically significant difference between the initial and final proBNP levels (p= 0.756. With the exception of serum sodium levels, there was no correlation between the final proBNP levels and body weight, urea, and creatinine (p>0.05. Similarly, there was also no correlation between initial proBNP levels and fluid load (p= 0.602 or between the percentage of extracted fluid and final proBNP levels (p= 0.155. Discussion: There was no significant correlation between the fluid load and initial proBNP levels or with the extracted fluid percentage and final proBNP levels in patients undergoing CRRT because of fluid overload.In conclusion, no appropriate marker was determined to evaluate cumulative fluid load and the extracted liquid volume.

Influence of parafunctional loading and prosthetic connection on stress distribution: a 3D finite element analysis.

Science.gov (United States)

Torcato, Leonardo Bueno; Pellizzer, Eduardo Piza; Verri, Fellippo Ramos; Falcón-Antenucci, Rosse Mary; Santiago Júnior, Joel Ferreira; de Faria Almeida, Daniel Augusto

2015-11-01

Clinicians should consider parafunctional occlusal load when planning treatment. Prosthetic connections can reduce the stress distribution on an implant-supported prosthesis. The purpose of this 3-dimensional finite element study was to assess the influence of parafunctional loading and prosthetic connections on stress distribution. Computer-aided design software was used to construct 3 models. Each model was composed of a bone and an implant (external hexagon, internal hexagon, or Morse taper) with a crown. Finite element analysis software was used to generate the finite element mesh and establish the loading and boundary conditions. A normal force (200-N axial load and 100-N oblique load) and parafunctional force (1000-N axial and 500-N oblique load) were applied. Results were visualized as the maximum principal stress. Three-way analysis of variance and Tukey test were performed, and the percentage of contribution of each variable to the stress concentration was calculated from sum-of squares-analysis. Stress was concentrated around the implant at the cortical bone, and models with the external hexagonal implant showed the highest stresses (PProsthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Numerical analysis of concrete-filled tubes with stiffening plates under large deformation axial loading

OpenAIRE

Albareda Valls, Albert

2013-01-01

Concrete-filled tubes have been increasingly used these recent decades thanks to their improved structural behavior, especially under compression.Concrete filling in these sections improves ¡ts compressive strength thanks to lateral pressure coming from confinement effect provided by the steel tube. At elevated percentages of loading,concrete suffers an important volumetric expansion, which is clearly restricted by the tube. Therefore, the core is subjected to a severe lateral pressure tha...

Infants with Down Syndrome: Percentage and Age for Acquisition of Gross Motor Skills

Science.gov (United States)

Pereira, Karina; Basso, Renata Pedrolongo; Lindquist, Ana Raquel Rodrigues; da Silva, Louise Gracelli Pereira; Tudella, Eloisa

2013-01-01

The literature is bereft of information about the age at which infants with Down syndrome (DS) acquire motor skills and the percentage of infants that do so by the age of 12 months. Therefore, it is necessary to identify the difference in age, in relation to typical infants, at which motor skills were acquired and the percentage of infants with DS…

Involuntary autobiographical memories are relatively more often reported during high cognitive load tasks.

Science.gov (United States)

Barzykowski, Krystian; Niedźwieńska, Agnieszka

2018-01-01

Recent studies on involuntary autobiographical memories (IAMs) in daily life have shown that they are most frequently reported during daily routines (e.g. while ironing). Such studies have suggested that reporting IAMs may be influenced by the level of the ongoing task demands and availability of cognitive resources. In two studies, we investigated the effects of cognitive load on reporting IAMs. To examine the presumed cognitive load dependency of IAMs, we utilised an often-employed experimental paradigm (Schlagman & Kvavilashvili, 2008) to elicit IAMs under conditions that differed in cognitive load. When performing a vigilance task, participants had to interrupt the task each time they experienced any spontaneous mental contents and write them down. We manipulated the level of cognitive load by either instructing (cognitive load group) or not instructing (control group) participants to perform an additional demanding task. We compared the groups on the number of IAMs and other mental contents (non-IAM contents) recorded, as well as on the frequency of IAMs that was calculated as a proportion of IAMs in all mental contents reported by the participant. We expected that if reporting IAMs depends on the level of cognitive demands, then we should observe lower frequency of IAMs in the cognitive load group compared to the control group. Consistently across studies, we observed a lower number of IAMs and non-IAM contents in the cognitive load group. However, IAMs unexpectedly constituted a higher percentage of all mental contents when participants were cognitively loaded. Further implications of the cognitive load effects for IAMs research and experimental methodology are discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

ABOUT FEW APPROACHES TO COMMERCIAL BANK PERCENTAGE POLICY CONSTRUCTION IN CREDITING POPULATION

Directory of Open Access Journals (Sweden)

A.A. Kuklin

2007-06-01

Full Text Available In the article we consider some aspects of Russian Federation and Sverdlovsk region bank sector development and few principles of credit organization percentage policy construction. We also describe interest rate calculation methods depending on currency toolkit and the received results of using the methods in reference to population crediting development. Besides we give some offers on increasing management efficiency of percentage policy and decreasing delayed credit debts level and some offers on specification of population crediting development forecasts in Sverdlovsk region.

Physiological analysis to quantify training load in badminton.

Science.gov (United States)

Majumdar, P; Khanna, G L; Malik, V; Sachdeva, S; Arif, M; Mandal, M

1997-01-01

OBJECTIVE: To estimate the training load of specific on court training regimens based on the magnitude of variation of heart rate-lactate response during specific training and to determine the magnitude of variation of biochemical parameters (urea, uric acid, and creatine phosphokinase (CPK)) 12 hours after the specific training programme so as to assess training stress. METHODS: The study was conducted on six national male badminton players. Maximum oxygen consumption (VO2), ventilation (VE), heart rate, and respiratory quotient were measured by a protocol of graded treadmill exercise. Twelve training sessions and 35 singles matches were analysed. Heart rate and blood lactate were monitored during technical training routines and match play. Fasting blood samples collected on two occasions--that is, during off season and 12 hours after specific training--were analysed for serum urea, uric acid, and CPK. RESULTS: Analysis of the on court training regimens showed lactate values of 8-10.5 mmol/l in different phases. The percentage of maximum heart rate ranged from 82% to 100%. Urea, uric acid, and CPK activity showed significant changes from (mean (SD)) 4.93 (0.75) mmol/l to 5.49 (0.84) mmol/l, 0.23 (0.04) to 0.33 (0.06) mmol/l, and 312 (211.8) to 363 (216.4) IU/l respectively. CONCLUSION: Maximum lactate reported in the literature ranges from 3-6 mmol/l. Comparatively high lactate values and high percentage of maximum heart rate found in on court training show a considerable stress on muscular and cardiovascular system. The training load needs appropriate monitoring to avoid over-training. Workouts that are too intensive may interfere with coordination, a factor that is important in sports requiring highly technical skill such as badminton. PMID:9429015

Curcumin-loaded ultradeformable nanovesicles as a potential delivery system for breast cancer therapy.

Science.gov (United States)

Abdel-Hafez, Salma M; Hathout, Rania M; Sammour, Omaima A

2018-07-01

In the current study, the transdermal route has been investigated to deliver the poorly bioavailable drug; curcumin into the systemic circulation, aiming to target both superficial and subcutaneous tumors such as the breast tumors. Accordingly, different colloidal carriers viz. ultradeformable nanovesicles comprising various penetration enhancers were exploited. Curcumin-loaded deformable vesicles were prepared by the thin film hydration method followed by extrusion. Sodium cholate and Tween 80 were set as standard edge activators and Labrasol, Transcutol, limonene and oleic acid were the penetration enhancers that were evaluated for their efficacy in skin permeation. The particle size and zeta potential of the prepared vesicles were significantly affected by the type of surfactant/penetration enhancer. The polydispersity measurements showed uniform particle size distribution indicating the sufficiency of the extrusion cycles performed. Curcumin, as a hydrophobic molecule, was well accommodated within the lipid bilayers of the prepared vesicles with entrapment efficiency (EE%) percentages and drug loading percentages (DL%) as high as 93.91% and 7.04%, respectively. The ex-vivo permeation studies were performed on male albino mice skin mounted on Franz diffusion cells. Oleic acid and Transcutol exhibited comparable fluxes to sodium cholate and Tween 80 (∼16 μg cm -2  h -1 ), whereas the fluxes of Labrasol and limonene were significantly lower. Cytotoxicity studies were performed using MTT assay on human breast cancer cell lines (MCF-7 cells). The results of the MTT assay demonstrated that oleic acid ultradeformable nanovesicles scored an IC 50 of 20 μg/ml which introduce these new curcumin-loaded nanovesicles as a successful delivery system for breast cancer therapy. Copyright © 2018 Elsevier B.V. All rights reserved.

Development of Triamcinolone Acetonide-Loaded Nanostructured Lipid Carriers (NLCs) for Buccal Drug Delivery Using the Box-Behnken Design.

Science.gov (United States)

Kraisit, Pakorn; Sarisuta, Narong

2018-04-23

The aim of this present work was to prepare triamcinolone acetonide (TA)-loaded nanostructured lipid carriers (TA-loaded NLCs) for buccal drug delivery systems using the Box-Behnken design. A hot homogenization method was used to prepare the TA-loaded NLCs. Spermaceti (X₁), soybean oil (X₂), and Tween 80 (X₃) were used as solid lipid, liquid lipid, and stabilizer, respectively. The particle size of TA-loaded NLCs was lower than 200 nm and the zeta potential displayed the negative charge in all formulations. The percentage encapsulation efficiency (%EE) of the TA-loaded NLCs showed that it was higher than 80% for all formulations. Field emission scanning electron microscope (FESEM) confirmed that the size of TA-loaded NLCs was approximately 100 nm and energy-dispersive X-ray spectroscopy (EDS) confirmed that the TA could be incorporated in the NLC system. The Higuchi model gave the highest value of the R², indicating that this model was a fit for the TA release profiles of TA-loaded NLCs. Confocal laser scanning microscopy (CLSM) was used to observe the drug penetration within the porcine buccal mucosa and Nile red-loaded NLCs showed significantly higher penetration depth at 8 h than at 2 h. Therefore, TA-loaded NLCs could be an efficient carrier for drug delivery through the buccal mucosa.

Towards smart energy systems: application of kernel machine regression for medium term electricity load forecasting.

Science.gov (United States)

Alamaniotis, Miltiadis; Bargiotas, Dimitrios; Tsoukalas, Lefteri H

2016-01-01

Integration of energy systems with information technologies has facilitated the realization of smart energy systems that utilize information to optimize system operation. To that end, crucial in optimizing energy system operation is the accurate, ahead-of-time forecasting of load demand. In particular, load forecasting allows planning of system expansion, and decision making for enhancing system safety and reliability. In this paper, the application of two types of kernel machines for medium term load forecasting (MTLF) is presented and their performance is recorded based on a set of historical electricity load demand data. The two kernel machine models and more specifically Gaussian process regression (GPR) and relevance vector regression (RVR) are utilized for making predictions over future load demand. Both models, i.e., GPR and RVR, are equipped with a Gaussian kernel and are tested on daily predictions for a 30-day-ahead horizon taken from the New England Area. Furthermore, their performance is compared to the ARMA(2,2) model with respect to mean average percentage error and squared correlation coefficient. Results demonstrate the superiority of RVR over the other forecasting models in performing MTLF.

Neural networks approach to forecast several hour ahead electricity prices and loads in deregulated market

Energy Technology Data Exchange (ETDEWEB)

Mandal, Paras; Senjyu, Tomonobu [Department of Electrical and Electronics, University of the Ryukyus, 1 Senbaru, Nagakami Nishihara, Okinawa 903-0213 (Japan); Funabashi, Toshihisa [Meidensha Corporation, Tokyo 103-8515 (Japan)

2006-09-15

In daily power markets, forecasting electricity prices and loads are the most essential task and the basis for any decision making. An approach to predict the market behaviors is to use the historical prices, loads and other required information to forecast the future prices and loads. This paper introduces an approach for several hour ahead (1-6h) electricity price and load forecasting using an artificial intelligence method, such as a neural network model, which uses publicly available data from the NEMMCO web site to forecast electricity prices and loads for the Victorian electricity market. An approach of selection of similar days is proposed according to which the load and price curves are forecasted by using the information of the days being similar to that of the forecast day. A Euclidean norm with weighted factors is used for the selection of the similar days. Two different ANN models, one for one to six hour ahead load forecasting and another for one to six hour ahead price forecasting have been proposed. The MAPE (mean absolute percentage error) results show a clear increasing trend with the increase in hour ahead load and price forecasting. The sample average of MAPEs for one hour ahead price forecasts is 9.75%. This figure increases to only 20.03% for six hour ahead predictions. Similarly, the one to six hour ahead load forecast errors (MAPE) range from 0.56% to 1.30% only. MAPE results show that several hour ahead electricity prices and loads in the deregulated Victorian market can be forecasted with reasonable accuracy. (author)

Neural networks approach to forecast several hour ahead electricity prices and loads in deregulated market

International Nuclear Information System (INIS)

Mandal, Paras; Senjyu, Tomonobu; Funabashi, Toshihisa

2006-01-01

In daily power markets, forecasting electricity prices and loads are the most essential task and the basis for any decision making. An approach to predict the market behaviors is to use the historical prices, loads and other required information to forecast the future prices and loads. This paper introduces an approach for several hour ahead (1-6 h) electricity price and load forecasting using an artificial intelligence method, such as a neural network model, which uses publicly available data from the NEMMCO web site to forecast electricity prices and loads for the Victorian electricity market. An approach of selection of similar days is proposed according to which the load and price curves are forecasted by using the information of the days being similar to that of the forecast day. A Euclidean norm with weighted factors is used for the selection of the similar days. Two different ANN models, one for one to six hour ahead load forecasting and another for one to six hour ahead price forecasting have been proposed. The MAPE (mean absolute percentage error) results show a clear increasing trend with the increase in hour ahead load and price forecasting. The sample average of MAPEs for one hour ahead price forecasts is 9.75%. This figure increases to only 20.03% for six hour ahead predictions. Similarly, the one to six hour ahead load forecast errors (MAPE) range from 0.56% to 1.30% only. MAPE results show that several hour ahead electricity prices and loads in the deregulated Victorian market can be forecasted with reasonable accuracy

Thermal comfort. Design criteria for heating and cooling load calculations; Thermische Behaglichkeit. Auslegungskriterien fuer Heiz- und Kuehllastberechnungen

Energy Technology Data Exchange (ETDEWEB)

Nadler, Norbert [CSE Nadler, Oranienburg (Germany)

2010-07-01

Due to the publication of the regulation DIN EN 15 251, the design criteria for the thermal indoor climate during the cooling load calculation and heating load calculation also are specified on European level. The regulation determines that the design values for the operational ambient temperature can be determined from the percentage of the dissatisfied values (PPD value according to DIN EN ISO 773). On national level, the exact definition is to take place for typical activities and thermal insulation values of the clothing. Alternatively, the direct use of the PPD value during the layout also is possible. It is shown that this method is to be preferred and that the most cooling load programs available at the market do not correspond to the generally accepted rules of the technology any longer.

Soil Carbon Mapping in Low Relief Areas with Combined Land Use Types and Percentages

Science.gov (United States)

Liu, Y. L.; Wu, Z. H.; Chen, Y. Y.; Wang, B. Z.

2018-05-01

Accurate mapping of soil carbon in low relief areas is of great challenge because of the defect of conventional "soil-landscape" model. Efforts have been made to integrate the land use information in the modelling and mapping of soil organic carbon (SOC), in which the spatial context was ignored. With 256 topsoil samples collected from Jianghan Plain, we aim to (i) explore the land-use dependency of SOC via one-way ANOVA; (ii) investigate the "spillover effect" of land use on SOC content; (iii) examine the feasibility of land use types and percentages (obtained with a 200-meter buffer) for soil mapping via regression Kriging (RK) models. Results showed that the SOC of paddy fields was higher than that of woodlands and irrigated lands. The land use type could explain 20.5 % variation of the SOC, and the value increased to 24.7 % when the land use percentages were considered. SOC was positively correlated with the percentage of water area and irrigation canals. Further research indicated that SOC of irrigated lands was significantly correlated with the percentage of water area and irrigation canals, while paddy fields and woodlands did not show similar trends. RK model that combined land use types and percentages outperformed the other models with the lowest values of RMSEC (5.644 g/kg) and RMSEP (6.229 g/kg), and the highest R2C (0.193) and R2P (0.197). In conclusions, land use types and percentages serve as efficient indicators for the SOC mapping in plain areas. Additionally, irrigation facilities contributed to the farmland SOC sequestration especially in irrigated lands.

Effect of Gene and Physical Activity Interaction on Trunk Fat Percentage Among the Newfoundland Population

Directory of Open Access Journals (Sweden)

Anthony Payne

2014-01-01

Full Text Available Objective To explore the effect of FTO gene and physical activity interaction on trunk fat percentage. Design and Methods Subjects are 3,004 individuals from Newfoundland and Labrador whose trunk fat percentage and physical activity were recorded, and who were genotyped for 11 single-nucleotide polymorphisms (SNPs in the FTO gene. Subjects were stratified by gender. Multiple tests and multiple regressions were used to analyze the effects of physical activity, variants of FTO , age, and their interactions on trunk fat percentage. Dietary information and other environmental factors were not considered. Results Higher levels of physical activity tend to reduce trunk fat percentage in all individuals. Furthermore, in males, rs9939609 and rs1421085 were significant (α = 0.05 in explaining central body fat, but no SNPs were significant in females. For highly active males, trunk fat percentage varied significantly between variants of rs9939609 and rs1421085, but there is no significant effect among individuals with low activity. The other SNPs examined were not significant in explaining trunk fat percentage. Conclusions Homozygous male carriers of non-obesity risk alleles at rs9939609 and rs1421085 will have significant reduction in central body fat from physical activity in contrast to homozygous males of the obesity-risk alleles. The additive effect of these SNPs is found in males with high physical activity only.

Blood pressure load does not add to ambulatory blood pressure level for cardiovascular risk stratification

DEFF Research Database (Denmark)

Li, Yan; Thijs, Lutgarde; Boggia, José

2014-01-01

Experts proposed blood pressure (BP) load derived from 24-hour ambulatory BP recordings as a more accurate predictor of outcome than level, in particular in normotensive people. We analyzed 8711 subjects (mean age, 54.8 years; 47.0% women) randomly recruited from 10 populations. We expressed BP...... load as percentage (%) of systolic/diastolic readings ≥135/≥85 mm Hg and ≥120/≥70 mm Hg during day and night, respectively, or as the area under the BP curve (mm Hg×h) using the same ceiling values. During a period of 10.7 years (median), 1284 participants died and 1109 experienced a fatal or nonfatal...... cardiovascular end point. In multivariable-adjusted models, the risk of cardiovascular complications gradually increased across deciles of BP level and load (Pbased on 24-hour systolic or diastolic BP level (generalized R(2) statistic ≤0.294%; net...

Power variables and bilateral force differences during unloaded and loaded squat jumps in high performance alpine ski racers.

Science.gov (United States)

Patterson, Carson; Raschner, Christian; Platzer, Hans-Peter

2009-05-01

The purpose of this paper was to investigate the power-load relationship and to compare power variables and bilateral force imbalances between sexes with squat jumps. Twenty men and 17 women, all members of the Austrian alpine ski team (junior and European Cup), performed unloaded and loaded (barbell loads equal to 25, 50, 75, and 100% body weight [BW]) squat jumps with free weights using a specially designed spotting system. Ground reaction force records from 2 force platforms were used to calculate relative average power (P), relative average power in the first 100 ms of the jump (P01), relative average power in the first 200 ms of the jump (P02), jump height, percentage of best jump height (%Jump), and maximal force difference between dominant and nondominant leg (Fmaxdiff). The men displayed significantly higher values at all loads for P and jump height (p free weights.

Appeals to AC as a Percentage of Appealable Hearing Level Dispositions

Data.gov (United States)

Social Security Administration — Longitudinal report detailing the numbers and percentages of Requests for Review (RR) of hearing level decisions or dismissals filed with the Appeals Council (AC)...

Effects of Fab' fragments of specific egg yolk antibody (IgY-Fab') against Shewanella putrefaciens on the preservation of refrigerated turbot.

Science.gov (United States)

Zhang, Qian; Lin, Hong; Sui, Jianxin; Wang, Jingxue; Cao, Limin

2015-01-01

In our previous studies the specific egg yolk antibody (IgY) against Shewanella putrefaciens (one of the specific spoilage organisms for marine products during aerobic chilling storage) demonstrated significant activity to prolong the shelf life of refrigerated fish. The exploitation of the antigen-binding fragment plus the hinge region (IgY-Fab') is now considered a promising method for improving the efficiency of such natural antimicrobial agents. The antimicrobial activity of IgY-Fab' against S. putrefaciens was investigated using refrigerated turbot as samples. By microbial, chemical and sensory tests, it was shown to be able to effectively inhibit bacterial growth and prolong the shelf life of samples, with an efficiency evaluated significantly higher than that of whole IgY with the same molarity. The interaction between IgY agents and S. putrefaciens cells was also investigated, and the IgY-Fab' showed a much greater ability to damage cell membranes than the whole IgY. Compared to whole IgY with the same molarity, IgY-Fab' demonstrated higher and more durable antimicrobial efficiency. Such a result was assumed to be closely related to its structural properties (such as the much lower molecular weight), which may enhance its ability to influence physiological activities of antigen bacteria, especially the property or/and structure of cell membranes. © 2014 Society of Chemical Industry.

Egg Yolk Antibodies, State of the Art and Future Prospects.

Science.gov (United States)

Schade, Rüdiger; Hlinak, Andreas

1996-01-01

Immunization of chickens and extraction of antibodies from egg yolk belongs to the alternative methods since the animals suffering is reduced by non-invasive antibody-sampling. Also, the number of animals needed to produce a certain amount of antibody can be reduced since chickens produce a significant higher antibody quantity than rabbits. Despite its several advantages this technology (IgY-technology) is rather scarcely used. Traditional behavior as well as limited or no information at all may hamper a broader acceptance at present. However, significant arguments exist in chicken housing, the choice of appropriate IgY-extraction methods and a lack of information regarding the use of IgY-antibodies. This paper intends to give a short introduction in the IgY-technology, to briefly discuss the state of the art and to inform on recent developments and discussions in this field. The suitability of IgY for special fields of application (as a result of the structural differences between IgY and IgG) is emphasized (e.g. assays combining IgG and IgY, immunization of chickens against highly conserved anti-genes). In addition, it is stressed that the IgY-technology as an alternative method can particularly integrate requirements of animal protection (reduce, replace, refine), science (characteristics of avian immune system and resulting properties of IgY) and economy (amount of IgY produced from one chicken).

Android and gynoid fat percentages and serum lipid levels in United States adults.

Science.gov (United States)

Min, Kyoung-Bok; Min, Jin-Young

2015-03-01

Accumulating evidence suggests that fat distribution is a better predictor of cardiovascular disease than body mass index (BMI). The aim of this study was to investigate the association of android and gynoid fat percentages with lipid profiles to determine whether android and/or gynoid fat percentages are associated with serum lipid levels. A population-based cross-sectional study. Five thousand six hundred and ninety-six adults (20 years and older) who participated in the National Health and Nutrition Examination Survey 2003-2006. The regional body composition in the android and gynoid regions was defined by dual energy X-ray absorptiometry (DXA). The estimation of lipid risk profiles included total cholesterol, high-density lipoprotein (HDL) -cholesterol, low-density lipoprotein (LDL) -cholesterol and triglycerides (TG). Regardless of gender, android and gynoid body fat percentages were positively and significantly correlated with BMI and waist circumference. After adjustment for age, ethnicity, education, smoking, alcohol consumption, dyslipidaemia and BMI, increases in android fat percentage were significantly associated with total cholesterol, TG and HDL cholesterol in males, and total cholesterol, HDL cholesterol and LDL cholesterol in females. The gynoid fat percentages showed a positive correlation with total cholesterol in males, whereas gynoid fat accumulation in females showed a favourable association with TG and HDL cholesterol. The observed associations differed according to ethnic groups. Our results suggest that regional fat distribution in the android and gynoid regions have different effects on lipid profiles, and that fat in the android region, rather than the gynoid region, may be an important factor in determining the risk of cardiovascular disease. © 2014 John Wiley & Sons Ltd.

12 CFR Appendix A to Part 707 - Annual Percentage Yield Calculation

Science.gov (United States)

2010-01-01

... percentage yield calculations for account disclosures and advertisements, while Part II discusses annual... number of days that would occur for any actual sequence of that many calendar months. If credit unions...

26 CFR 1.410(b)-5 - Average benefit percentage test.

Science.gov (United States)

2010-04-01

... benefit percentages may be determined on the basis of any definition of compensation that satisfies § 1... underlying definition of compensation that satisfies section 414(s). Except as otherwise specifically... definitions of section 414(s) compensation in the determination of rates; (B) Use of different definitions of...

39 CFR 3010.23 - Calculation of percentage change in rates.

Science.gov (United States)

2010-07-01

... DOMINANT PRODUCTS Rules for Applying the Price Cap § 3010.23 Calculation of percentage change in rates. (a... Postal Service billing determinants. The Postal Service shall make reasonable adjustments to the billing determinants to account for the effects of classification changes such as the introduction, deletion, or...

75 FR 35098 - Federal Employees' Retirement System; Normal Cost Percentages

Science.gov (United States)

2010-06-21

... normal cost percentages and requests for actuarial assumptions and data to the Board of Actuaries, care of Gregory Kissel, Actuary, Office of Planning and Policy Analysis, Office of Personnel Management... Regulations, regulates how normal costs are determined. Recently, the Board of Actuaries of the Civil Service...

Load research manual. Volume 1. Load research procedures

Energy Technology Data Exchange (ETDEWEB)

Brandenburg, L.; Clarkson, G.; Grund, Jr., C.; Leo, J.; Asbury, J.; Brandon-Brown, F.; Derderian, H.; Mueller, R.; Swaroop, R.

1980-11-01

This three-volume manual presents technical guidelines for electric utility load research. Special attention is given to issues raised by the load data reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. In Volumes 1 and 2, procedures are suggested for determining data requirements for load research, establishing the size and customer composition of a load survey sample, selecting and using equipment to record customer electricity usage, processing data tapes from the recording equipment, and analyzing the data. Statistical techniques used in customer sampling are discussed in detail. The costs of load research also are estimated, and ongoing load research programs at three utilities are described. The manual includes guides to load research literature and glossaries of load research and statistical terms.

Load power device, system and method of load control and management employing load identification

Science.gov (United States)

Yang, Yi; Luebke, Charles John; Schoepf, Thomas J.

2018-01-09

A load power device includes a power input, at least one power output for at least one load, a plurality of sensors structured to sense voltage and current at the at least one power output, and a processor. The processor provides: (a) load identification based upon the sensed voltage and current, and (b) load control and management based upon the load identification.

Reliability analysis and prediction of mixed mode load using Markov Chain Model

International Nuclear Information System (INIS)

Nikabdullah, N.; Singh, S. S. K.; Alebrahim, R.; Azizi, M. A.; K, Elwaleed A.; Noorani, M. S. M.

2014-01-01

The aim of this paper is to present the reliability analysis and prediction of mixed mode loading by using a simple two state Markov Chain Model for an automotive crankshaft. The reliability analysis and prediction for any automotive component or structure is important for analyzing and measuring the failure to increase the design life, eliminate or reduce the likelihood of failures and safety risk. The mechanical failures of the crankshaft are due of high bending and torsion stress concentration from high cycle and low rotating bending and torsional stress. The Markov Chain was used to model the two states based on the probability of failure due to bending and torsion stress. In most investigations it revealed that bending stress is much serve than torsional stress, therefore the probability criteria for the bending state would be higher compared to the torsion state. A statistical comparison between the developed Markov Chain Model and field data was done to observe the percentage of error. The reliability analysis and prediction was derived and illustrated from the Markov Chain Model were shown in the Weibull probability and cumulative distribution function, hazard rate and reliability curve and the bathtub curve. It can be concluded that Markov Chain Model has the ability to generate near similar data with minimal percentage of error and for a practical application; the proposed model provides a good accuracy in determining the reliability for the crankshaft under mixed mode loading

Analytical evidences of the use of iron-gall ink as a pigment on miniature paintings

Science.gov (United States)

Aceto, Maurizio; Calà, Elisa

2017-12-01

Iron-gall ink (IGI) has been used by scribes for writing since at least the 4th century CE. Another typical use of this ink was for drawing: many Old Masters created beautiful sketches in brown-black hues. Despite its widespread use to draw lines, it seems like IGI was hardly used for painting as well. In fact, the number of identification on manuscripts is very low at present. This could be partially due to a lack of reliable diagnostic information. In this work we tried to better define the possibility of identifying IGI as a pigment on illuminate manuscripts, evaluating the pros and cons of three different techniques: UV-visible diffuse reflectance spectrophotometry with optic fibres (FORS), Raman spectroscopy and XRF spectrometry. With concern to in situ non-invasive analysis, Raman spectroscopy has the best diagnostic power but FORS seems to provide the better compromise between selectivity and ease of application. Moreover, new analytical evidences was given on the particular use of IGI by ancient illuminators: a non-invasive and micro-invasive diagnostic survey on Western manuscripts datable in the range 6-16th centuries was carried out showing that, apart from its widespread use as an ink for writing and drawing, IGI was largely used as a pigment too. The large number of identification obtained allows us to hypothesise that this pigment was used all through medieval Europe up to at least the Renaissance, where its use is already documented in drawing. The occurrence of IGI in miniature paintings older than 6th century or more recent than 16th century cannot be excluded, as is its use beyond Europe; further measurements could instead widen the time range and the geographic area. Nevertheless, the present study allows shedding a new light on the use of this colourant all along the period of medieval and Renaissance miniature painting art.

Reserves in load capacity assessment of existing bridges

Science.gov (United States)

Žitný, Jan; Ryjáček, Pavel

2017-09-01

High percentage of all railway bridges in the Czech Republic is made of structural steel. Majority of these bridges is designed according to historical codes and according to the deterioration, they have to be assessed if they satisfy the needs of modern railway traffic. The load capacity assessment of existing bridges according to Eurocodes is however often too conservative and especially, braking and acceleration forces cause huge problems to structural elements of the bridge superstructure. The aim of this paper is to review the different approaches for the determination of braking and acceleration forces. Both, current and historical theoretical models and in-situ measurements are considered. The research of several local European state norms superior to Eurocode for assessment of existing railway bridges shows the big diversity of used local approaches and the conservativeness of Eurocode. This paper should also work as an overview for designers dealing with load capacity assessment, revealing the reserves for existing bridges. Based on these different approaches, theoretical models and data obtained from the measurements, the method for determination of braking and acceleration forces on the basis of real traffic data should be proposed.

26 CFR 1.42-8 - Election of appropriate percentage month.

Science.gov (United States)

2010-04-01

... Section 1.42-8 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY INCOME TAX INCOME TAXES Credits Against Tax § 1.42-8 Election of appropriate percentage month. (a) Election under section... previously placed in service under section 42(e). (5) Amount allocated. The housing credit dollar amount...

Short-Term Fuzzy Load Forecasting Model Using Genetic–Fuzzy and Ant Colony–Fuzzy Knowledge Base Optimization

Directory of Open Access Journals (Sweden)

Murat Luy

2018-05-01

Full Text Available The estimation of hourly electricity load consumption is highly important for planning short-term supply–demand equilibrium in sources and facilities. Studies of short-term load forecasting in the literature are categorized into two groups: classical conventional and artificial intelligence-based methods. Artificial intelligence-based models, especially when using fuzzy logic techniques, have more accurate load estimations when datasets include high uncertainty. However, as the knowledge base—which is defined by expert insights and decisions—gets larger, the load forecasting performance decreases. This study handles the problem that is caused by the growing knowledge base, and improves the load forecasting performance of fuzzy models through nature-inspired methods. The proposed models have been optimized by using ant colony optimization and genetic algorithm (GA techniques. The training and testing processes of the proposed systems were performed on historical hourly load consumption and temperature data collected between 2011 and 2014. The results show that the proposed models can sufficiently improve the performance of hourly short-term load forecasting. The mean absolute percentage error (MAPE of the monthly minimum in the forecasting model, in terms of the forecasting accuracy, is 3.9% (February 2014. The results show that the proposed methods make it possible to work with large-scale rule bases in a more flexible estimation environment.

PEG-PLGA electrospun nanofibrous membranes loaded with Au@Fe2O3 nanoparticles for drug delivery applications

Science.gov (United States)

Spadaro, Salvatore; Santoro, Marco; Barreca, Francesco; Scala, Angela; Grimato, Simona; Neri, Fortunato; Fazio, Enza

2018-02-01

A PEGylated-PLGA random nanofibrous membrane loaded with gold and iron oxide nanoparticles and with silibinin was prepared by electrospinning deposition. The nanofibrous membrane can be remotely controlled and activated by a laser light or magnetic field to release biological agents on demand. The nanosystems were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, and thermogravimetric analyses. The drug loading efficiency and drug content percentages were determined by UV-vis optical absorption spectroscopy. The nanofibrous membrane irradiated by a relatively low-intensity laser or stimulated by a magnetic field showed sustained silibinin release for at least 60 h, without the burst effect. The proposed low-cost electrospinning procedure is capable of assembling, via a one-step procedure, a stimuli-responsive drug-loaded nanosystem with metallic nanoparticles to be externally activated for controlled drug delivery.

Owners of nuclear power plants: Percentage ownership of commercial nuclear power plants by utility companies

International Nuclear Information System (INIS)

Wood, R.S.

1987-08-01

The following list indicates percentage ownership of commercial nuclear power plants by utility companies as of June 1, 1987. The list includes all plants licensed to operate, under construction, docked for NRC safety and environmental reviews, or under NRC antitrust review. It does not include those plants announced but not yet under review or those plants formally canceled. In many cases, ownership may be in the process of changing as a result of altered financial conditions, changed power needs, and other reasons. However, this list reflects only those ownership percentages of which the NRC has been formally notified. Part I lists plants alphabetically with their associated applicants/licensees and percentage ownership. Part II lists applicants/licensees alphabetically with their associated plants and percentage ownership. Part I also indicates which plants have received operating licenses (OL's). Footnotes for both parts appear at the end of this document

Percentage tumor necrosis following chemotherapy in neuroblastoma correlates with MYCN status but not survival.

Science.gov (United States)

Bomken, Simon; Davies, Beverley; Chong, Leeai; Cole, Michael; Wood, Katrina M; McDermott, Michael; Tweddle, Deborah A

2011-03-01

The percentage of chemotherapy-induced necrosis in primary tumors corresponds with outcome in several childhood malignancies, including high-risk metastatic diseases. In this retrospective pilot study, the authors assessed the importance of postchemotherapy necrosis in high-risk neuroblastoma with a histological and case notes review of surgically resected specimens. The authors reviewed all available histology of 31 high-risk neuroblastoma cases treated with COJEC (dose intensive etoposide and vincristine with either cyclophosphamide, cisplatin or carboplatin) or OPEC/OJEC (etoposide, vincristine and cyclophosphamide with alternating cisplatin [OPEC] or carboplatin [OJEC]) induction chemotherapy in 2 Children's Cancer & Leukaemia Group (CCLG) pediatric oncology centers. The percentage of postchemotherapy necrosis was assessed and compared with MYCN amplification status and overall survival. The median percentage of postchemotherapy tumor necrosis was 60%. MYCN status was available for 28 cases, of which 12 were amplified (43%). Survival in cases with ≥ 60% necrosis or ≥ 90% necrosis was not better than those with less necrosis, nor was percentage necrosis associated with survival using Cox regression. However, MYCN-amplified tumors showed a higher percentage of necrosis than non-MYCN-amplified tumors, 71.3% versus 37.2% (P = .006). This effect was not related to prechemotherapy necrosis and did not confer improved overall survival. Postchemotherapy tumor necrosis is higher in patients with MYCN amplification. In this study, postchemotherapy necrosis did not correlate with overall survival and should not lead to modification of postoperative treatment. However, these findings need to be confirmed in a larger prospective study of children with high-risk neuroblastoma.

Runoff and loads of nutrients and heavy metals from an urbanized area.

Science.gov (United States)

Shirasuna, H; Fukushima, T; Matsushige, K; Imai, A; Ozaki, N

2006-01-01

To investigate the run-off characteristics of dissolved and particulate substances from a heavily urbanized area (basin area: 95 ha, percentage of impervious surfaces: 60%), sensors for measuring water level, water temperature, DO, pH, electric conductivity (EC), turbidity and ammonium ion were placed in the channel connecting storm sewers and natural river, together with water sampling for analyzing SS, nutrients and metals. While both turbidity and EC showed apparent "first flush", the peaks of EC were always earlier than those of turbidity. In a similar manner, dissolved nutrients and metals exhibited earlier "first flush" compared with particulate nutrients and acid-extractable metals. Significantly positive correlations between EC and dissolved substances as well as those between turbidity and particulate (acid-extractable minus dissolved) substances were usually observed, and two distinct different regressions were found between the two datasets separated before and after the concentration peaks. Using these relationships, the total loads during the respective rainfall events were calculated on the basis of EC and turbidity changes. The total loads of nitrogen, zinc, etc. were nearly proportional to the lengths of non-rainfall periods before the events, indicating that these loads derived from the atmospheric deposition.

Evaluation of electron mobility in InSb quantum wells by means of percentage-impact

International Nuclear Information System (INIS)

Mishima, T. D.; Edirisooriya, M.; Santos, M. B.

2014-01-01

In order to quantitatively analyze the contribution of each scattering factor toward the total carrier mobility, we use a new convenient figure-of-merit, named a percentage impact. The mobility limit due to a scattering factor, which is widely used to summarize a scattering analysis, has its own advantage. However, a mobility limit is not quite appropriate for the above purpose. A comprehensive understanding of the difference in contribution among many scattering factors toward the total carrier mobility can be obtained by evaluating percentage impacts of scattering factors, which can be straightforwardly calculated from their mobility limits and the total mobility. Our percentage impact analysis shows that threading dislocation is one of the dominant scattering factors for the electron transport in InSb quantum wells at room temperature

Population-Attributable Risk Percentages for Racialized Risk Environments

Science.gov (United States)

Arriola, Kimberly Jacob; Haardörfer, Regine; McBride, Colleen M.

2016-01-01

Research about relationships between place characteristics and racial/ethnic inequities in health has largely ignored conceptual advances about race and place within the discipline of geography. Research has also almost exclusively quantified these relationships using effect estimates (e.g., odds ratios), statistics that fail to adequately capture the full impact of place characteristics on inequities and thus undermine our ability to translate research into action. We draw on geography to further develop the concept of “racialized risk environments,” and we argue for the routine calculation of race/ethnicity-specific population-attributable risk percentages. PMID:27552263

[Relationship between hypertension and percentage of body fat, in children of Anhui province].

Science.gov (United States)

Tao, R W; Wan, Y H; Zhang, H; Wang, Y F; Wang, B; Xu, L; Zuo, A Z; Tong, S L; Tao, F B

2016-02-01

To study the situation of hypertension among children in Anhui province and to analyze its association with the percentage of body fat. A total of 8 890 aged 7-17 years old children, were tested for blood pressure and thickness of skin fold in Anhui province. Hypertension in children was diagnosed referring to the 2010 Chinese guidelines for the management of hypertension (revised in 2010). The percentage of body fat was calculated according to the thickness of skin fold and specific formulas. METHODS used for statistics analysis would include t test, χ(2) test while logistic regression was used to analyze the relationship between percentage of body fat in children and adolescents. In total, 8 890 subjects aged 7-17 years were recruited, in Anhui province. The prevalence of hypertension in Children aged 7-17 was 13.6%, with the total number of hypertension as 1 210, in Anhui province. There were significant differences in the prevalence of hypertension among urban and rural children. Both prevalence of hypertension among boys and girls in urban area appeared higher than those in the rural area. In the urban areas, the prevalence rates of hypertension in both boys and girls were higher than the ones in rural area (χ(2) values were 36.36, 7.79, 42.10 and 13.77, respectively, and Pfat between boys and girls from the rural or urban areas were both significant.OR values of the boys and girls of group P(40)- and P(60)-were 1.65 and 1.75, respectively. Risks of hypertension in boys and girls showed significantly increase by P(40) and P(60), respectively. The prevalence of hypertension in both boys and girls increased along with the increase of the percentage on body fat. Since higher percentage of body fat could increase the risk of hypertension, reduction of body fat content would be beneficial to the success of prevention and control of hypertension in children.

Dual drug loaded chitosan nanoparticles-sugar--coated arsenal against pancreatic cancer.

Science.gov (United States)

David, Karolyn Infanta; Jaidev, Leela Raghav; Sethuraman, Swaminathan; Krishnan, Uma Maheswari

2015-11-01

Pancreatic cancer is an aggressive form of cancer with poor survival rates. The increased mortality due to pancreatic cancer arises due to many factors such as development of multidrug resistance, presence of cancer stem cells, development of a stromal barrier and a hypoxic environment due to hypo-perfusion. The present study aims to develop a nanocarrier for a combination of drugs that can address these multiple issues. Quercetin and 5-fluorouracil were loaded in chitosan nanoparticles, individually as well as in combination. The nanoparticles were characterized for morphology, size, zeta potential, percentage encapsulation of drugs as well as their release profiles in different media. The dual drug-loaded carrier exhibited good entrapment efficiency (quercetin 95% and 5-fluorouracil 75%) with chitosan: quercetin: 5-fluorouracil in the ratio 3:1:2. The release profiles suggest that 5-fluorouracil preferentially localized in the periphery while quercetin was located towards the core of chitosan nanoparticles. Both drugs exhibited considerable association with the chitosan matrix. The dual drug-loaded carrier system exhibited significant toxicity towards pancreatic cancer cells both in the 2D as well as in the 3D cultures. We believe that the results from these studies can open up interesting options in the treatment of pancreatic cancer. Copyright © 2015 Elsevier B.V. All rights reserved.

Decoupling Weather Influence from User Habits for an Optimal Electric Load Forecast System

Directory of Open Access Journals (Sweden)

Luca Massidda

2017-12-01

Full Text Available The balance between production and consumption in a smart grid with high penetration of renewable sources and in the presence of energy storage systems benefits from an accurate load prediction. A general approach to load forecasting is not possible because of the additional complication due to the increasing presence of distributed and usually unmeasured photovoltaic production. Various methods are proposed in the literature that can be classified into two classes: those that predict by separating the portion of load due to consumption habits from the part of production due to local weather conditions, and those that attempt to predict the load as a whole. The characteristic that should lead to a preference for one approach over another is obviously the percentage of penetration of distributed production. The study site discussed in this document is the grid of Borkum, an island located in the North Sea. The advantages in terms of reducing forecasting errors for the electrical load, which can be obtained by using weather information, are explained. In particular, when comparing the results of different approaches gradually introducing weather forecasts, it is clear that the correct functional dependency of production has to be taken into account in order to obtain maximum yield from the available information. Where possible, this approach can significantly improve the quality of the forecasts, which in turn can improve the balance of a network—especially if energy storage systems are in place.

Distribution load forecast with interactive correction of horizon loads

International Nuclear Information System (INIS)

Glamochanin, V.; Andonov, D.; Gagovski, I.

1994-01-01

This paper presents the interactive distribution load forecast application that performs the distribution load forecast with interactive correction of horizon loads. It consists of two major parts implemented in Fortran and Visual Basic. The Fortran part is used for the forecasts computations. It consists of two methods: Load Transfer Coupling Curve Fitting (LTCCF) and load Forecast Using Curve Shape Clustering (FUCSC). LTCCF is used to 'correct' the contaminated data because of load transfer among neighboring distribution areas. FUCSC uses curve shape clustering to forecast the distribution loads of small areas. The forecast for each small area is achieved by using the shape of corresponding cluster curve. The comparison of forecasted loads of the area with historical data will be used as a tool for the correction of the estimated horizon load. The Visual Basic part is used to provide flexible interactive user-friendly environment. (author). 5 refs., 3 figs

Marathon performance in relation to body fat percentage and training indices in recreational male runners.

Science.gov (United States)

Tanda, Giovanni; Knechtle, Beat

2013-01-01

The purpose of this study was to investigate the effect of anthropometric characteristics and training indices on marathon race times in recreational male marathoners. Training and anthropometric characteristics were collected for a large cohort of recreational male runners (n = 126) participating in the Basel marathon in Switzerland between 2010 and 2011. Among the parameters investigated, marathon performance time was found to be affected by mean running speed and the mean weekly distance run during the training period prior to the race and by body fat percentage. The effect of body fat percentage became significant as it exceeded a certain limiting value; for a relatively low body fat percentage, marathon performance time correlated only with training indices. Marathon race time may be predicted (r = 0.81) for recreational male runners by the following equation: marathon race time (minutes) = 11.03 + 98.46 exp(-0.0053 mean weekly training distance [km/week]) + 0.387 mean training pace (sec/km) + 0.1 exp(0.23 body fat percentage [%]). The marathon race time results were valid over a range of 165-266 minutes.

SURFACE ELECTROMYOGRAPHY OF MASSETER AND TEMPORAL MUSCLES WITH USE PERCENTAGE WHILE CHEWING ON CANDIDATES FOR GASTROPLASTY.

Science.gov (United States)

Santos, Andréa Cavalcante Dos; Silva, Carlos Antonio Bruno da

Surface electromyography identifies changes in the electrical potential of the muscles during each contraction. The percentage of use is a way to treat values enabling comparison between groups. To analyze the electrical activity and the percentage of use of masseter and temporal muscles during chewing in candidates for gastric bypass. It was used Surface Electromyography Miotool 200,400 (Miotec (r), Porto Alegre/RS, Brazil) integrated with Miograph 2.0 software, involving patients between 20-40 years old. Were included data on electrical activity simultaneously and in pairs of temporal muscle groups and masseter at rest, maximum intercuspation and during the chewing of food previously classified. Were enrolled 39 patients (59 women), mean age 27.1+/-5.7. The percentage of use focused on temporal muscle, in a range of 11-20, female literacy (n=11; 47.82) on the left side and 15 (65.21) on the right-hand side. In the male, nine (56.25) at left and 12 (75.00) on the right-hand side. In masseter, also in the range of 11 to 20, female literacy (n=10; 43.48) on the left side and 11 (47.83) on the right-hand side. In the male, nine (56.25) at left and eight (50.00) on the right-hand side. 40-50% of the sample showed electrical activity in muscles (masseter and temporal) with variable values, and after processing into percentage value, facilitating the comparison of load of used electrical activity between the group, as well as usage percentage was obtained of muscle fibers 11-20% values involving, representing a range that is considered as a reference to the group studied. The gender was not a variable. A eletromiografia de superfície identifica variações dos potenciais elétricos dos músculos durante cada contração realizada. O percentual de uso é uma forma de tratar valores possibilitando comparação entre grupos. Analisar a atividade elétrica e o percentual de uso dos músculos masséteres e temporais durante a mastigação em candidatos à gastroplastia

Use of enzymes in diets with different percentages of added fat for broilers

Directory of Open Access Journals (Sweden)

F.G.P. Costa

2013-06-01

Full Text Available We assessed the extent to which the removal of fat source, and consequently its compounds, such as linoleic acid, can affect the performance of broilers. We used 600 male Cobb 500 day old chicks. The birds were distributed in a completely randomized experimental design, with five treatments and six replicates of 20 birds each. The treatments were: (T1 diet - positive control (PC, which met the nutritional needs; (T2 diet - negative control (CN, a reduction of 100kcal/kg and low linoleic acid content; (T3: diet - negative control reformulated for low linoleic acid content and a set of Quantum phytase XT and Econase XT 25 (BAL + QFit-Eco, (T4: diet - negative control reformulated, with the percentage of linoleic acid adjusted to an intermediate value between the value of the diet and diet CP and CN to use a set of Quantum phytase XT and XT Econase 25 (IAL + QFit-Eco and (T5: diet - negative control reformulated, with the percentage of linoleic acid adjusted to a value similar to that of the positive control diet and joint use of Quantum phytase XT and XT Econase 25 (AAL + QFit-Eco. The joint use of Quantum Phytase and Econase promoted improvement in the performance of broilers from 1 to 21 days. The greatest weight gain was obtained with diets containing percentages of total fat and linoleic acids. Dietary supplementation with enzymes resulted in higher levels of calcium in the tibia, whatever the percentage of linoleic studied.

Effect of Constraint Loading on the Lower Limb Muscle Forces in Weightless Treadmill Exercise

Directory of Open Access Journals (Sweden)

Ning Guo

2018-01-01

Full Text Available Long exposure to the microgravity will lead to muscle atrophy and bone loss. Treadmill exercise could mitigate the musculoskeletal decline. But muscle atrophy remains inevitable. The constraint loading applied on astronauts could affect the muscle force and its atrophy severity. However, the quantitative correlation between constraint loading mode and muscle forces remains unclear. This study aimed to characterize the influence of constraint loading mode on the lower limb muscle forces in weightless treadmill exercise. The muscle forces in the full gait cycle were calculated with the inverse dynamic model of human musculoskeletal system. The calculated muscle forces at gravity were validated with the EMG data. Muscle forces increased at weightlessness compared with those at the earth’s gravity. The increasing percentage from high to low is as follows: biceps femoris, gastrocnemius, soleus, vastus, and rectus femoris, which was in agreement with the muscle atrophy observed in astronauts. The constraint loading mode had an impact on the muscle forces in treadmill exercise and thus could be manipulated to enhance the effect of the muscle training in spaceflight. The findings could provide biomechanical basis for the optimization of treadmill constraint system and training program and improve the countermeasure efficiency in spaceflight.

7 CFR 929.49 - Marketable quantity, allotment percentage, and annual allotment.

Science.gov (United States)

2010-01-01

... AGRICULTURE CRANBERRIES GROWN IN STATES OF MASSACHUSETTS, RHODE ISLAND, CONNECTICUT, NEW JERSEY, WISCONSIN, MICHIGAN, MINNESOTA, OREGON, WASHINGTON, AND LONG ISLAND IN THE STATE OF NEW YORK Order Regulating Handling... history, established pursuant to § 929.48. Such allotment percentage shall be established by the Secretary...

13 CFR 108.1840 - Computation of NMVC Company's Capital Impairment Percentage.

Science.gov (United States)

2010-01-01

... Capital Impairment Percentage. 108.1840 Section 108.1840 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM NMVC Company's Noncompliance With Terms of Leverage Computation of Nmvc Company's Capital Impairment § 108.1840 Computation of NMVC Company's Capital Impairment...

The CU 2-D-MAX-DOAS instrument – Part 2: Raman scattering probability measurements and retrieval of aerosol optical properties

Energy Technology Data Exchange (ETDEWEB)

Ortega, Ivan; Coburn, Sean; Berg, Larry K.; Lantz, Kathy; Michalsky, Joseph; Ferrare, Richard A.; Hair, Johnathan W.; Hostetler, Chris A.; Volkamer, Rainer

2016-01-01

The multiannual global mean of aerosol optical depth at 550 nm (AOD₅₅₀) over land is ~0.19, and that over oceans is ~0.13. About 45 % of the Earth surface shows AOD₅₅₀ smaller than 0.1. There is a need for measurement techniques that are optimized to measure aerosol optical properties under low AOD conditions. We present an inherently calibrated retrieval (i.e., no need for radiance calibration) to simultaneously measure AOD and the aerosol phase function parameter, <i>g>, based on measurements of azimuth distributions of the Raman scattering probability (RSP), the near-absolute rotational Raman scattering (RRS) intensity. We employ radiative transfer model simulations to show that for solar azimuth RSP measurements at solar elevation and solar zenith angle (SZA) smaller than 80°, RSP is insensitive to the vertical distribution of aerosols and maximally sensitive to changes in AOD and <i>g> under near-molecular scattering conditions. The University of Colorado two-dimensional Multi-AXis Differential Optical Absorption Spectroscopy (CU 2-D-MAX-DOAS) instrument was deployed as part of the Two Column Aerosol Project (TCAP) at Cape Cod, MA, during the summer of 2012 to measure direct sun spectra and RSP from scattered light spectra at solar relative azimuth angles (SRAAs) between 5 and 170°. During two case study days with (1) high aerosol load (17 July, 0.3 < AOD₄₃₀ < 0.6) and (2) near-molecular scattering conditions (22 July, AOD₄₃₀ < 0.13) we compare RSP-based retrievals of AOD₄₃₀ and <i>g> with data from a co-located CIMEL sun photometer, Multi-Filter Rotating Shadowband Radiometer (MFRSR), and an airborne High Spectral Resolution Lidar (HSRL-2). The average difference (relative to DOAS) for AOD₄₃₀ is +0.012 ± 0.023 (CIMEL), -0.012 ± 0.024 (MFRSR), -0.011 ± 0.014 (HSRL-2), and +0.023 ± 0.013 (CIMEL_AOD - MFRSR_AOD) and yields the following

Development of an Energy-Savings Calculation Methodology for Residential Miscellaneous Electric Loads: Preprint

Energy Technology Data Exchange (ETDEWEB)

Hendron, R.; Eastment, M.

2006-08-01

In order to meet whole-house energy savings targets beyond 50% in residential buildings, it will be essential that new technologies and systems approaches be developed to address miscellaneous electric loads (MELs). These MELs are comprised of the small and diverse collection of energy-consuming devices found in homes, including what are commonly known as plug loads (televisions, stereos, microwaves), along with all hard-wired loads that do not fit into other major end-use categories (doorbells, security systems, garage door openers). MELs present special challenges because their purchase and operation are largely under the control of the occupants. If no steps are taken to address MELs, they can constitute 40-50% of the remaining source energy use in homes that achieve 60-70% whole-house energy savings, and this percentage is likely to increase in the future as home electronics become even more sophisticated and their use becomes more widespread. Building America (BA), a U.S. Department of Energy research program that targets 50% energy savings by 2015 and 90% savings by 2025, has begun to identify and develop advanced solutions that can reduce MELs.

Validation of Field Methods to Assess Body Fat Percentage in Elite Youth Soccer Players.

Science.gov (United States)

Munguia-Izquierdo, Diego; Suarez-Arrones, Luis; Di Salvo, Valter; Paredes-Hernandez, Victor; Alcazar, Julian; Ara, Ignacio; Kreider, Richard; Mendez-Villanueva, Alberto

2018-05-01

This study determined the most effective field method for quantifying body fat percentage in male elite youth soccer players and developed prediction equations based on anthropometric variables. Forty-four male elite-standard youth soccer players aged 16.3-18.0 years underwent body fat percentage assessments, including bioelectrical impedance analysis and the calculation of various skinfold-based prediction equations. Dual X-ray absorptiometry provided a criterion measure of body fat percentage. Correlation coefficients, bias, limits of agreement, and differences were used as validity measures, and regression analyses were used to develop soccer-specific prediction equations. The equations from Sarria et al. (1998) and Durnin & Rahaman (1967) reached very large correlations and the lowest biases, and they reached neither the practically worthwhile difference nor the substantial difference between methods. The new youth soccer-specific skinfold equation included a combination of triceps and supraspinale skinfolds. None of the practical methods compared in this study are adequate for estimating body fat percentage in male elite youth soccer players, except for the equations from Sarria et al. (1998) and Durnin & Rahaman (1967). The new youth soccer-specific equation calculated in this investigation is the only field method specifically developed and validated in elite male players, and it shows potentially good predictive power. © Georg Thieme Verlag KG Stuttgart · New York.

Load theory behind the wheel; perceptual and cognitive load effects.

Science.gov (United States)

Murphy, Gillian; Greene, Ciara M

2017-09-01

Perceptual Load Theory has been proposed as a resolution to the longstanding early versus late selection debate in cognitive psychology. There is much evidence in support of Load Theory but very few applied studies, despite the potential for the model to shed light on everyday attention and distraction. Using a driving simulator, the effect of perceptual and cognitive load on drivers' visual search was assessed. The findings were largely in line with Load Theory, with reduced distractor processing under high perceptual load, but increased distractor processing under high cognitive load. The effect of load on driving behaviour was also analysed, with significant differences in driving behaviour under perceptual and cognitive load. In addition, the effect of perceptual load on drivers' levels of awareness was investigated. High perceptual load significantly increased inattentional blindness and deafness, for stimuli that were both relevant and irrelevant to driving. High perceptual load also increased RTs to hazards. The current study helps to advance Load Theory by illustrating its usefulness outside of traditional paradigms. There are also applied implications for driver safety and roadway design, as the current study suggests that perceptual and cognitive load are important factors in driver attention. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Quantitative Analysis of the Effect of Iterative Reconstruction Using a Phantom: Determining the Appropriate Blending Percentage

Science.gov (United States)

Kim, Hyun Gi; Lee, Young Han; Choi, Jin-Young; Park, Mi-Suk; Kim, Myeong-Jin; Kim, Ki Whang

2015-01-01

Purpose To investigate the optimal blending percentage of adaptive statistical iterative reconstruction (ASIR) in a reduced radiation dose while preserving a degree of image quality and texture that is similar to that of standard-dose computed tomography (CT). Materials and Methods The CT performance phantom was scanned with standard and dose reduction protocols including reduced mAs or kVp. Image quality parameters including noise, spatial, and low-contrast resolution, as well as image texture, were quantitatively evaluated after applying various blending percentages of ASIR. The optimal blending percentage of ASIR that preserved image quality and texture compared to standard dose CT was investigated in each radiation dose reduction protocol. Results As the percentage of ASIR increased, noise and spatial-resolution decreased, whereas low-contrast resolution increased. In the texture analysis, an increasing percentage of ASIR resulted in an increase of angular second moment, inverse difference moment, and correlation and in a decrease of contrast and entropy. The 20% and 40% dose reduction protocols with 20% and 40% ASIR blending, respectively, resulted in an optimal quality of images with preservation of the image texture. Conclusion Blending the 40% ASIR to the 40% reduced tube-current product can maximize radiation dose reduction and preserve adequate image quality and texture. PMID:25510772

Plastic limit loads for cylindrical shell intersections under combined loading

International Nuclear Information System (INIS)

Skopinsky, V.N.; Berkov, N.A.; Vogov, R.A.

2015-01-01

In this research, applied methods of nonlinear analysis and results of determining the plastic limit loads for shell intersection configurations under combined internal pressure, in-plane moment and out-plane moment loadings are presented. The numerical analysis of shell intersections is performed using the finite element method, geometrically nonlinear shell theory in quadratic approximation and plasticity theory. For determining the load parameter of proportional combined loading, the developed maximum criterion of rate of change of relative plastic work is employed. The graphical results for model of cylindrical shell intersection under different two-parameter combined loadings (as generalized plastic limit load curves) and three-parameter combined loading (as generalized plastic limit load surface) are presented on the assumption that the internal pressure, in-plane moment and out-plane moment loads were applied in a proportional manner. - Highlights: • This paper presents nonlinear two-dimensional FE analysis for shell intersections. • Determining the plastic limit loads under combined loading is considered. • Developed maximum criterion of rate of change of relative plastic work is employed. • Plastic deformation mechanism in shell intersections is discussed. • Results for generalized plastic limit load curves of branch intersection are presented

Postural loads during walking after an imbalance of occlusion created with unilateral cotton rolls

Directory of Open Access Journals (Sweden)

Saccucci Matteo

2010-05-01

Full Text Available Abstract Background It was showed that stomatognathic functions correlate with alterations in locomotion, that are detectable through the analysis of loading during walking. For example, subjects with symptoms of Temporomandibular disorders (TMDs showed a significant higher load pressure on the two feet, respect to health subjects, when cotton rolls were inserted. This previous study appeared to suggest that the alteration of postural loads associated to a particular alteration of stomatognathic condition (in this case, the cotton rolls inserted between the two dental arches is detectable only in TMD's subjects, while it resulted not detectable in health subjects, because in that study, health subjects did not show any significant alteration of postural loads related to the different stomatognathic tested conditions. In other words, in that previous study, in the group of health subjects, no significant difference in postural loads was observed among the different test conditions; while TMD subjects showed a significant higher load pressure on the two feet when cotton rolls were inserted, respect to all the other tested conditions. Thus, the aim of this study was to better investigate these correlations in health subjects without TMD's symptoms, testing other different intra-oral conditions, and to verifywhether an experimentally induced imbalance of occlusion, obtained putting an unilateral cotton roll, could cause an alteration of postural loading on feet during walking. Findings In a sample of thirty Caucasian adult females (mean age 28.5 ± 4.5, asymptomatic for TMDs, when a cotton roll was positioned on the left or the right sides of dental arches, so causing a lateral shift of the mandible, the percentage of loading and the loading surface of the ipsi-lateral foot, left or right, were found to be significantly lower than in habitual occlusion (p Conclusions This study showed that in health subjects without TMD's symptoms, an experimentally

Increased percentage of Th17 cells in peritoneal fluid is associated with severity of endometriosis.

Science.gov (United States)

Gogacz, Marek; Winkler, Izabela; Bojarska-Junak, Agnieszka; Tabarkiewicz, Jacek; Semczuk, Andrzej; Rechberger, Tomasz; Adamiak, Aneta

2016-09-01

Th17 cells are a newly discovered T helper lymphocyte subpopulation, producing interleukin IL-17. Th17 cells are present in blood and peritoneal fluid (PF) at different stages of endometriosis. We aim to establish their potential importance in the pathogenesis and clinical features of the disease. The percentage of Th17 cells among T helper lymphocytes was determined in the PF and peripheral blood (PB) of patients with endometriosis and in the control group by flow cytometry using monoclonal antibodies: anti-CD-4-FITC, anti-CD-3-PE/Cy5, and anti-IL-17A-PE. Th17 percentage is increased in PF in comparison with PB in both endometriotic patients and in the control group. In severe endometriosis, the percentage of Th17 cells in PF was higher than with early (I/II stage) endometriosis. A positive correlation between the percentage of Th17 cells in PF and the white blood cell count in PB was found in patients with endometriosis. Targeting the activity of PF Th17 cells may have an influence on the proliferation of ectopic tissue and clinical manifestations of the disease. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Effects of Aloe vera on dressing percentage and haemato-biochemidal parameters of broiler chickens

Directory of Open Access Journals (Sweden)

Jagmohan Singh

2013-09-01

Full Text Available Aim: To evaluate the effects of Aloe vera on dressing percentage and hemato-biochemical parameters of broiler chickens.Materials and Methods: A total of 90 chicks were used in this study. They were randomly allocated into 3 treatment groups.Fresh Aloe vera leaf juice (ALJ was prepared and administered to the test group T3 at the rate of 20 g/Lin drinking water daily.This study was carried out for 42 days. Dressing percentage and hemato-biochemical parameters were recorded at the end ofexperiment.Results: Group that was given Aloe vera (T3 showed numerically higher dressing percentage as compared to control group(T1 and drug control group (T2. It also showed significantly (P0.05 differences were observed in other parameters among all the treatment groups.Conclusion: Aloe vera has potential to be a growth promoter in broiler chicks and its growth promoting effects are comparableto that of antibiotic growth promoter (AGP.

Opposite effects of capacity load and resolution load on distractor processing.

Science.gov (United States)

Zhang, Weiwei; Luck, Steven J

2015-02-01

According to the load theory of attention, an increased perceptual load reduces distractor processing whereas an increased working memory load facilitates distractor processing. Here we raise the possibility that the critical distinction may instead be between an emphasis on resolution and an emphasis on capacity. That is, perceptual load manipulations typically emphasize resolution (fine-grained discriminations), whereas working memory load manipulations typically emphasize capacity (simultaneous processing of multiple relevant stimuli). To test the plausibility of this hypothesis, we used a visual working memory task that emphasized either the number of items to be stored (capacity load, retaining 2 vs. 4 colors) or the precision of the representations (resolution load, detecting small vs. large color changes). We found that an increased capacity load led to increased flanker interference (a measure of distractor processing), whereas an increased resolution load led to reduced flanker interference. These opposite effects of capacity load and resolution load on distractor processing mirror the previously described opposite effects of perceptual load and working memory load.

Load testing circuit

DEFF Research Database (Denmark)

2009-01-01

A load testing circuit a circuit tests the load impedance of a load connected to an amplifier. The load impedance includes a first terminal and a second terminal, the load testing circuit comprising a signal generator providing a test signal of a defined bandwidth to the first terminal of the load...

The dependence of percentage depth dose on the source-to-skin ...

African Journals Online (AJOL)

The variation of percentage depth dose (PDD) with source-to-skin distance (SSD) for kilovoltage X-rays used in radiotherapy has been investigated. Based on physical parameters of photon fluence, absorption and scatter during interaction of radiation with tissue, a mathematical model was developed to predict the PDDs at ...

46 CFR 154.1730 - Ethylene oxide: Loading and off loading.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Ethylene oxide: Loading and off loading. 154.1730... Operating Requirements § 154.1730 Ethylene oxide: Loading and off loading. (a) The master shall ensure that before ethylene oxide is loaded into a cargo tank: (1) The tank is thoroughly clean, dry, and free of...

Investigation of the optimal percentage of green seaweed that may be co-digested with dairy slurry to produce gaseous biofuel.

Science.gov (United States)

Allen, Eoin; Wall, David M; Herrmann, Christiane; Murphy, Jerry D

2014-10-01

Ulva lactuca, a green seaweed, accumulates on beaches and shallow estuaries subject to eutrophication. As a residue, and a macro-algae, it is a source of sustainable third generation biofuel. Production of biomethane from mono-digestion of U. lactuca, however is problematic due to high levels of sulphur and low ratios of carbon to nitrogen. Fresh and dried U. lactuca were continuously co-digested with dairy slurry at ratios of 25%, 50% and 75% (by volatile solid content) in 6 number 5L reactors for 9months. The reactors digesting a mix with 75% U. lactuca struggled to reach stable conditions. Volatile fatty acid levels of 14,000mgl(-1) were experienced. The levels of ammonia increased with percentage U. lactuca in the mix. Optimum conditions were observed with a mix of 25% fresh U. lactuca and 75% slurry. A yield of 170LCH4kg(-1)VS was achieved at an organic loading rate of 2.5kgVSm(-3)d(-1). Copyright © 2014 Elsevier Ltd. All rights reserved.

Variation of moment-curvature diagrams in square columns of reinforced concrete due to the presence of loads outside the plane

International Nuclear Information System (INIS)

Calvo Camacho, Glen

2014-01-01

An experimental investigation was developed to determine if has existed a variation in the moment-curvature diagrams, basic input of performance-based methodologies, due to the presence of loads outside the plane. A documentary revision of experimental, analytical and instrumentation methods is contemplated for the determination of the effect of loads outside the plane, the design of a prototype column in agreement with the requirements of current design, the construction and the failure of four columns subjected to different requests of load outside the plane. The test has consisted of a column of 14 cm of cantilevered side to which horizontal load combinations are applied, outside and inside the plane, in the upper part, as well as an axial load by means of a system of post tension with servo control. Four specimens are studied in which the only difference has been the horizontal load applied. An incremental load is applied for the control case in the plane until reaching the structural failure. The remaining tests are developed based on the magnitude of the maximum load, for which a constant load is first applied outside the plane corresponding to a percentage of the control load (30%, 50% and 80%) and then has proceed to apply the incremental load in the plane. The results have showed that for out-of-plane loads greater than 30%, both ultimate curvature and capacity are considerably reduced. In addition, a linear reduction of the ductility of the element is observed as the loads outside the plane increase. An underestimation of capabilities is shown in analytical research. In addition, the software used is shown without consider the effect of off-plane loads. (author) [es

Peak load-impulse characterization of critical pulse loads in structural dynamics

International Nuclear Information System (INIS)

Abrahamson, G.R.; Lindberg, H.E.

1975-01-01

In presenting the characterization scheme, some general features are described first. A detailed analysis is given for the rigid-plastic system of one degree of freedom to illustrate the calculation of critical load curves in terms of peak load and impulse. This is followed by the presentation of critical load curves for uniformly loaded rigid-plastic beams and plates and for dynamic buckling of cylindrical shells under uniform lateral loads. The peak load-impulse characterization of critical pulse loads is compared with the dynamic load factor characterization, and some aspects of the history of the peak load-pulse scheme are presented. (orig./HP) [de

Infants with Down syndrome: percentage and age for acquisition of gross motor skills.

Science.gov (United States)

Pereira, Karina; Basso, Renata Pedrolongo; Lindquist, Ana Raquel Rodrigues; da Silva, Louise Gracelli Pereira; Tudella, Eloisa

2013-03-01

The literature is bereft of information about the age at which infants with Down syndrome (DS) acquire motor skills and the percentage of infants that do so by the age of 12 months. Therefore, it is necessary to identify the difference in age, in relation to typical infants, at which motor skills were acquired and the percentage of infants with DS that acquire them in the first year of life. Infants with DS (N=20) and typical infants (N=25), both aged between 3 and 12 months, were evaluated monthly using the AIMS. In the prone position, a difference of up to 3 months was found for the acquisition of the 3rd to 16th skill. There was a difference in the percentage of infants with DS who acquired the 10th to 21st skill (from 71% to 7%). In the supine position, a difference of up to one month was found from the 3rd to 7th skill; however, 100% were able to perform these skills. In the sitting position, a difference of 1-4 months was found from the 1st to 12th skill, ranging from 69% to 29% from the 9th to 12th. In the upright position, the difference was 2-3 months from the 3rd to 8th skill. Only 13% acquired the 8th skill and no other skill was acquired up to the age of 12 months. The more complex the skills the greater the difference in age between typical infants and those with DS and the lower the percentage of DS individuals who performed the skills in the prone, sitting and upright positions. None of the DS infants were able to stand without support. Copyright © 2012 Elsevier Ltd. All rights reserved.

System and method employing a minimum distance and a load feature database to identify electric load types of different electric loads

Science.gov (United States)

Lu, Bin; Yang, Yi; Sharma, Santosh K; Zambare, Prachi; Madane, Mayura A

2014-12-23

A method identifies electric load types of a plurality of different electric loads. The method includes providing a load feature database of a plurality of different electric load types, each of the different electric load types including a first load feature vector having at least four different load features; sensing a voltage signal and a current signal for each of the different electric loads; determining a second load feature vector comprising at least four different load features from the sensed voltage signal and the sensed current signal for a corresponding one of the different electric loads; and identifying by a processor one of the different electric load types by determining a minimum distance of the second load feature vector to the first load feature vector of the different electric load types of the load feature database.

Preparation and in vitro characterization of SN-38-loaded, self-forming polymeric depots as an injectable drug delivery system.

Science.gov (United States)

Manaspon, Chawan; Hongeng, Suradej; Boongird, Atthaporn; Nasongkla, Norased

2012-10-01

This work describes the preparation and characterization of anticancer-loaded injectable polymeric depots that consisted of D,L-lactide (LA), ε-caprolactone (CL), and poly(ethylene glycol) (PEG) or [poly(ε-caprolactone)-random-poly(D,L-lactide)]-block-poly(ethylene glycol)-block-[poly(ε-caprolactone)-random-poly(D,L-lactide)] (PLEC) copolymers for malignant gliomas treatment. PLECs were polymerized with different percentages of LA to deliver 7-ethyl-10-hydroxycamptothecin (SN-38), a highly potent anticancer drug. SN-38-loaded depots could form directly in phosphate buffer saline with more than 98% encapsulation efficiency. The release rate of SN-38 from depots was found to depend on the amount of LA in PLECs, loading content of SN-38 in the depots, and depot weight. Encapsulation of SN-38 inside depots could enhance the stability of SN-38 where all of SN-38 released after 60 days was in an active form. Depots without SN-38 were evaluated as noncytotoxic against U-87MG, whereas SN-38-loaded depots showed cytotoxic effect as a function of concentration. Copyright © 2012 Wiley Periodicals, Inc.

System and method employing a self-organizing map load feature database to identify electric load types of different electric loads

Science.gov (United States)

Lu, Bin; Harley, Ronald G.; Du, Liang; Yang, Yi; Sharma, Santosh K.; Zambare, Prachi; Madane, Mayura A.

2014-06-17

A method identifies electric load types of a plurality of different electric loads. The method includes providing a self-organizing map load feature database of a plurality of different electric load types and a plurality of neurons, each of the load types corresponding to a number of the neurons; employing a weight vector for each of the neurons; sensing a voltage signal and a current signal for each of the loads; determining a load feature vector including at least four different load features from the sensed voltage signal and the sensed current signal for a corresponding one of the loads; and identifying by a processor one of the load types by relating the load feature vector to the neurons of the database by identifying the weight vector of one of the neurons corresponding to the one of the load types that is a minimal distance to the load feature vector.

Estimated percentage of typhoid fever in adult pakistani population (TAP) study

International Nuclear Information System (INIS)

Mehboob, F.; Arshad, A.; Firdous, S.; Ahmed, S.; Rehma, S.

2013-01-01

Typhoid fever is a serious infection with high morbidity and mortality in untreated cases. It is one of the very common infections in developing countries due to various factors involving hygiene and sanitation. Objective: To determine the estimated percentage of typhoid fever in Pakistani population and to find the commonly prescribed antibiotics for the disease. Material and Methods: This cross sectional study was conducted on 1036 patients, selected from forty five general practitioner clinics, between June to October 2010. Patients of > 18 years of age with > 3 days history of fever (> 100 degree F) and high index of suspicion for typhoid fever were tested for typhoid fever using Typhidot kits and positive cases were recruited for monitoring response to treatment. The febrile patients with clear cut history of urinary or respiratory infect-ion, hypovolemic shock or hepatobiliary disease were excluded and not tested by typhidot kit. The antibiotics prescribed to study population by various general practitioners were noted. Data was analysed on SPSS. Results were expressed in percentages and proportions. Results: Total 1036 patients were recruited. Typhoidot test was negative in 63.9% and positive in 36.1% patients with highest percentages of positive cases in Karachi, Rawalpindi and Hyderabad. The maximum number of cases were reported in summer season especially from June to August. Most of the patients were between ages of 19 - 39 years. The commonest anti-biotics prescribed were Ofloxacin, Ciprofloxacin and Levofloxacin. Conclusion: Typhoid fever is very common infection in Pakistan caused by Salmonella typhi which is transmitted among humans through faecooral route. Disease can be controlled not only by antibiotics like fluoroquinolones but by patient education, improvement in hygiene and sanitation, safe supply of clean drinking water and prophylactic vaccination as well. However, timely diagnosis and appropriate management with proper antibiotics is the key

Estimated percentage of typhoid fever in adult pakistani population (TAP) study

Energy Technology Data Exchange (ETDEWEB)

Mehboob, F.; Arshad, A.; Firdous, S.; Ahmed, S.; Rehma, S. [Mayo Hospital, Lahore (Pakistan). Dept. of Medicine

2013-01-15

Typhoid fever is a serious infection with high morbidity and mortality in untreated cases. It is one of the very common infections in developing countries due to various factors involving hygiene and sanitation. Objective: To determine the estimated percentage of typhoid fever in Pakistani population and to find the commonly prescribed antibiotics for the disease. Material and Methods: This cross sectional study was conducted on 1036 patients, selected from forty five general practitioner clinics, between June to October 2010. Patients of > 18 years of age with > 3 days history of fever (> 100 degree F) and high index of suspicion for typhoid fever were tested for typhoid fever using Typhidot kits and positive cases were recruited for monitoring response to treatment. The febrile patients with clear cut history of urinary or respiratory infect-ion, hypovolemic shock or hepatobiliary disease were excluded and not tested by typhidot kit. The antibiotics prescribed to study population by various general practitioners were noted. Data was analysed on SPSS. Results were expressed in percentages and proportions. Results: Total 1036 patients were recruited. Typhoidot test was negative in 63.9% and positive in 36.1% patients with highest percentages of positive cases in Karachi, Rawalpindi and Hyderabad. The maximum number of cases were reported in summer season especially from June to August. Most of the patients were between ages of 19 - 39 years. The commonest anti-biotics prescribed were Ofloxacin, Ciprofloxacin and Levofloxacin. Conclusion: Typhoid fever is very common infection in Pakistan caused by Salmonella typhi which is transmitted among humans through faecooral route. Disease can be controlled not only by antibiotics like fluoroquinolones but by patient education, improvement in hygiene and sanitation, safe supply of clean drinking water and prophylactic vaccination as well. However, timely diagnosis and appropriate management with proper antibiotics is the key

External perforated Solar Screens for daylighting in residential desert buildings: Identification of minimum perforation percentages

KAUST Repository

Sherif, Ahmed

2012-06-01

The desert climate is endowed by clear sky conditions, providing an excellent opportunity for optimum utilization of natural light in daylighting building indoor spaces. However, the sunny conditions of the desert skies, in countries like Egypt and Saudi Arabia, result in the admittance of direct solar radiation, which leads to thermal discomfort and the incidence of undesired glare. One type of shading systems that is used to permit daylight while controlling solar penetration is " Solar Screens" Very little research work addressed different design aspects of external Solar Screens and their influence on daylighting performance, especially in desert conditions, although these screens proved their effectiveness in controlling solar radiation in traditional buildings throughout history.This paper reports on the outcomes of an investigation that studied the influence of perforation percentage of Solar Screens on daylighting performance in a typical residential living room of a building in a desert location. The objective was to identify minimum perforation percentage of screen openings that provides adequate illuminance levels in design-specific cases and all-year-round.Research work was divided into three stages. Stage one focused on the analysis of daylighting illuminance levels in specific dates and times, while the second stage was built on the results of the first stage, and addressed year round performance using Dynamic Daylight Performance Metrics (DDPMs). The third stage addressed the possibility of incidence of glare in specific cases where illuminance levels where found very high in some specific points during the analysis of first stage. The research examined the daylighting performance in an indoor space with a number of assumed fixed experimentation parameters that were chosen to represent the principal features of a typical residential living room located in a desert environment setting.Stage one experiments demonstrated that the screens fulfilled the

The effect of insulin resistance and exercise on the percentage of CD16(+) monocyte subset in obese individuals.

Science.gov (United States)

de Matos, Mariana A; Duarte, Tamiris C; Ottone, Vinícius de O; Sampaio, Pâmela F da M; Costa, Karine B; de Oliveira, Marcos F Andrade; Moseley, Pope L; Schneider, Suzanne M; Coimbra, Cândido C; Brito-Melo, Gustavo E A; Magalhães, Flávio de C; Amorim, Fabiano T; Rocha-Vieira, Etel

2016-06-01

Obesity is a low-grade chronic inflammation condition, and macrophages, and possibly monocytes, are involved in the pathological outcomes of obesity. Physical exercise is a low-cost strategy to prevent and treat obesity, probably because of its anti-inflammatory action. We evaluated the percentage of CD16(-) and CD16(+) monocyte subsets in obese insulin-resistant individuals and the effect of an exercise bout on the percentage of these cells. Twenty-seven volunteers were divided into three experimental groups: lean insulin sensitive, obese insulin sensitive and obese insulin resistant. Venous blood samples collected before and 1 h after an aerobic exercise session on a cycle ergometer were used for determination of monocyte subsets by flow cytometry. Insulin-resistant obese individuals have a higher percentage of CD16(+) monocytes (14.8 ± 2.4%) than the lean group (10.0 ± 1.3%). A positive correlation of the percentage of CD16(+) monocytes with body mass index and fasting plasma insulin levels was found. One bout of moderate exercise reduced the percentage of CD16(+) monocytes by 10% in all the groups evaluated. Also, the absolute monocyte count, as well as all other leukocyte populations, in lean and obese individuals, increased after exercise. This fact may partially account for the observed reduction in the percentage of CD16(+) cells in response to exercise. Insulin-resistant, but not insulin-sensitive obese individuals, have an increased percentage of CD16(+) monocytes that can be slightly modulated by a single bout of moderate aerobic exercise. These findings may be clinically relevant to the population studied, considering the involvement of CD16(+) monocytes in the pathophysiology of obesity. Copyright © 2016 John Wiley & Sons, Ltd. Obesity is now considered to be an inflammatory condition associated with many pathological consequences, including insulin resistance. It is proposed that insulin resistance contributes to the aggravation of the

Demand Response Load Following of Source and Load Systems

DEFF Research Database (Denmark)

Hu, Jianqiang; Cao, Jinde; Yong, Taiyou

2017-01-01

This paper presents a demand response load following strategy for an interconnected source and load system, in which we utilize traditional units and population of cooling thermostatically controlled loads (TCLs) to follow the mismatched power caused by the load activities and the renewable power...... injection in real time. In the demand side of power systems, these TCLs are often affiliated to a bus load agent and can be aggregated to multiple TCL aggregators. Firstly, aggregate evaluation of the TCL aggregator is carried out based on a bilinear aggregate model so as to derive the available regulation...

Cognitive Load Theory: How Many Types of Load Does It Really Need?

Science.gov (United States)

Kalyuga, Slava

2011-01-01

Cognitive load theory has been traditionally described as involving three separate and additive types of load. Germane load is considered as a learning-relevant load complementing extraneous and intrinsic load. This article argues that, in its traditional treatment, germane load is essentially indistinguishable from intrinsic load, and therefore…

Studies on the Effect of Type and Solarization Period on Germination Percentage of Four Weed Species

Directory of Open Access Journals (Sweden)

J. Rostam

2011-01-01

Full Text Available Abstract In order to study the effects of soil solarization on weed control, an experiment with factorial arrangement in a randomized complete block design with four replications was conducted in a fallow farm in Daregaz in 2008. Factors included solarization duration (0, 2, 4 and 6 weeks and soil moisture content (dry and moist. Soil seed bank was sampled (in two depth, 0-10 and 10-20 cm prior to the experiment and immediately after applying treatments, and germination percentage of weed species were determined. Results of this study showed that seed germination percentage in 10 cm soil depth was influenced by soil moisture and solarization and their interactions, while in 20 cm soil depth only solarization period affected the weed seed germination. Germination percentage in moist soil was less than that in dry soil. Seed germination percentage declined more by increasing solarization duration, so that the greatest decline was obtained after 6 weeks solarization. Solarization decreased germination percentage in moist soil more than that in dry soil. Overall, the results of this experiment indicated that solarization of moist soil for 6 weeks was the most effective treatment in controlling common lambsquatres (Chenopodium album, common purslane (Portulaca oleracea, redroot pigweed (Amaranthus retroflexus, and wild mustard (Sinapis arvensis, while solarization of dry soil for 2 weeks was the least effective treatment for weed control. Keywords: Solarization, Soil moisture, Seed bank

Stormwater Runoff Pollutant Loading Distributions and Their Correlation with Rainfall and Catchment Characteristics in a Rapidly Industrialized City

Science.gov (United States)

Li, Dongya; Wan, Jinquan; Ma, Yongwen; Wang, Yan; Huang, Mingzhi; Chen, Yangmei

2015-01-01

Fast urbanization and industrialization in developing countries result in significant stormwater runoff pollution, due to drastic changes in land-use, from rural to urban. A three-year study on the stormwater runoff pollutant loading distributions of industrial, parking lot and mixed commercial and residential catchments was conducted in the Tongsha reservoir watershed of Dongguan city, a typical, rapidly industrialized urban area in China. This study presents the changes in concentration during rainfall events, event mean concentrations (EMCs) and event pollution loads per unit area (EPLs). The first flush criterion, namely the mass first flush ratio (MFFn), was used to identify the first flush effects. The impacts of rainfall and catchment characterization on EMCs and pollutant loads percentage transported by the first 40% of runoff volume (FF40) were evaluated. The results indicated that the pollutant wash-off process of runoff during the rainfall events has significant temporal and spatial variations. The mean rainfall intensity (I), the impervious rate (IMR) and max 5-min intensity (Imax5) are the critical parameters of EMCs, while Imax5, antecedent dry days (ADD) and rainfall depth (RD) are the critical parameters of FF40. Intercepting the first 40% of runoff volume can remove 55% of TSS load, 53% of COD load, 58% of TN load, and 61% of TP load, respectively, according to all the storm events. These results may be helpful in mitigating stormwater runoff pollution for many other urban areas in developing countries. PMID:25774922

Stormwater runoff pollutant loading distributions and their correlation with rainfall and catchment characteristics in a rapidly industrialized city.

Science.gov (United States)

Li, Dongya; Wan, Jinquan; Ma, Yongwen; Wang, Yan; Huang, Mingzhi; Chen, Yangmei

2015-01-01

Fast urbanization and industrialization in developing countries result in significant stormwater runoff pollution, due to drastic changes in land-use, from rural to urban. A three-year study on the stormwater runoff pollutant loading distributions of industrial, parking lot and mixed commercial and residential catchments was conducted in the Tongsha reservoir watershed of Dongguan city, a typical, rapidly industrialized urban area in China. This study presents the changes in concentration during rainfall events, event mean concentrations (EMCs) and event pollution loads per unit area (EPLs). The first flush criterion, namely the mass first flush ratio (MFFn), was used to identify the first flush effects. The impacts of rainfall and catchment characterization on EMCs and pollutant loads percentage transported by the first 40% of runoff volume (FF40) were evaluated. The results indicated that the pollutant wash-off process of runoff during the rainfall events has significant temporal and spatial variations. The mean rainfall intensity (I), the impervious rate (IMR) and max 5-min intensity (Imax5) are the critical parameters of EMCs, while Imax5, antecedent dry days (ADD) and rainfall depth (RD) are the critical parameters of FF40. Intercepting the first 40% of runoff volume can remove 55% of TSS load, 53% of COD load, 58% of TN load, and 61% of TP load, respectively, according to all the storm events. These results may be helpful in mitigating stormwater runoff pollution for many other urban areas in developing countries.

Selection of Hidden Layer Neurons and Best Training Method for FFNN in Application of Long Term Load Forecasting

Science.gov (United States)

Singh, Navneet K.; Singh, Asheesh K.; Tripathy, Manoj

2012-05-01

For power industries electricity load forecast plays an important role for real-time control, security, optimal unit commitment, economic scheduling, maintenance, energy management, and plant structure planning etc. A new technique for long term load forecasting (LTLF) using optimized feed forward artificial neural network (FFNN) architecture is presented in this paper, which selects optimal number of neurons in the hidden layer as well as the best training method for the case study. The prediction performance of proposed technique is evaluated using mean absolute percentage error (MAPE) of Thailand private electricity consumption and forecasted data. The results obtained are compared with the results of classical auto-regressive (AR) and moving average (MA) methods. It is, in general, observed that the proposed method is prediction wise more accurate.

Thermotolerant coliform loadings to coastal areas of Santa Catarina (Brazil) evidence the effect of growing urbanisation and insufficient provision of sewerage infrastructure.

Science.gov (United States)

Garbossa, Luis H P; Souza, Robson V; Campos, Carlos J A; Vanz, Argeu; Vianna, Luiz F N; Rupp, Guilherme S

2017-01-01

Thermotolerant coliform (TC) loadings were quantified for 49 catchments draining into the North and South Bays of Santa Catarina (SC, southeastern Brazil), an area known for its tourism and aquaculture. TC loadings were calculated based on flow measurements taken in 26 rivers. TC concentrations ere quantified based on surface water samples collected at 49 catchment outlets in 2012 and 2013. Median TC loads ranged from 3.7 × 10 3 to 6.8 × 10 8 MPN s -1 . TC loadings in the catchments increased in proportion to increases in resident human population, population density and percentage of urbanised area. Catchments with more than 60% of area covered by wastewater collection and treatment systems had higher TC loads per person than catchments with less than 25%. Based on the study catchments, these results indicate that current sewerage infrastructure is ineffective in reducing contamination of faecal origin to surface waters. These findings have important implications for the management of microbiological health hazards in bathing, recreational and shellfish aquaculture waters in the North and South Bays of Santa Catarina Island.

Dynamical load factor of impact loaded shell structures

International Nuclear Information System (INIS)

Hammel, J.

1977-01-01

Dynamical loaded structures can be analysed by spectral representations, which usually lead to an enormous computational effort. If it is possible to find a fitting dynamical load factor, the dynamical problem can be reduced to a statical one. The computation of this statical problem is much simpler. The disadvantage is that the dynamical load factor usually leads to a very rough approximation. In this paper it will be shown, that by combination of these two methods, the approximation of the dynamical load factor can be improved and the consumption of computation time can be enormously reduced. (Auth.)

Research of Impact Load in Large Electrohydraulic Load Simulator

Directory of Open Access Journals (Sweden)

Yongguang Liu

2014-01-01

Full Text Available The stronger impact load will appear in the initial phase when the large electric cylinder is tested in the hardware-in-loop simulation. In this paper, the mathematical model is built based on AMESim, and then the reason of the impact load is investigated through analyzing the changing tendency of parameters in the simulation results. The inhibition methods of impact load are presented according to the structural invariability principle and applied to the actual system. The final experimental result indicates that the impact load is inhibited, which provides a good experimental condition for the electric cylinder and promotes the study of large load simulator.

The interaction between calreticulin and immunoglobulin G and immunoglobulin Y

DEFF Research Database (Denmark)

Møllegaard, Karen Mai; Duus, Karen; Træholt, Sofie Dietz

2011-01-01

accumulating in support of calreticulin as a polypeptide binding chaperone. In contrast to mammalian immunoglobulin G (IgG), which has complex type N-glycans, chicken immunoglobulin Y (IgY) possesses a monoglucosylated high mannose N-linked glycan, which is a ligand for calreticulin. Here, we have used solid...... and solution-phase assays to analyze the in vitro binding of calreticulin, purified from human placenta, to human IgG and chicken IgY in order to compare the interactions. In addition, peptides from the respective immunoglobulins were included to further probe the binding specificity of calreticulin....... The experiments demonstrate the ability of calreticulin to bind to denatured forms of both IgG and IgY regardless of the glycosylation state of the proteins. Furthermore, calreticulin exhibits binding to peptides (glycosylated and non-glycosylated) derived from trypsin digestion of both immunoglobulins...

Load research manual. Volume 2. Fundamentals of implementing load research procedures

Energy Technology Data Exchange (ETDEWEB)

Brandenburg, L.; Clarkson, G.; Grund, Jr., C.; Leo, J.; Asbury, J.; Brandon-Brown, F.; Derderian, H.; Mueller, R.; Swaroop, R.

1980-11-01

This three-volume manual presents technical guidelines for electric utility load research. Special attention is given to issues raised by the load data reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. In Volumes 1 and 2, procedures are suggested for determining data requirements for load research, establishing the size and customer composition of a load survey sample, selecting and using equipment to record customer electricity usage, processing data tapes from the recording equipment, and analyzing the data. Statistical techniques used in customer sampling are discussed in detail. The costs of load research also are estimated, and ongoing load research programs at three utilities are described. The manual includes guides to load research literature and glossaries of load research and statistical terms.

Maximizing the Therapeutic Efficacy of Imatinib Mesylate-Loaded Niosomes on Human Colon Adenocarcinoma Using Box-Behnken Design.

Science.gov (United States)

Kassem, Mohammed A; El-Sawy, Hossam S; Abd-Allah, Fathy I; Abdelghany, Tamer M; El-Say, Khalid M

2017-01-01

This research purposed to formulate an optimized imatinib mesylate (IM)-loaded niosomes to improve its chemotherapeutic efficacy. The influence of 3 formulation factors on niosomal vesicular size (Y 1 ), zeta potential (Y 2 ), entrapment capacity percentage (Y 3 ), the percentage of initial drug release after 2 h (Y 4 ), and the percentage of cumulative drug release after 24 h (Y 5 ) were studied and optimized using Box-Behnken design. Optimum desirability was specified and the optimized formula was prepared, stability tested, morphologically examined, checked for vesicular bilayer formation and evaluated for its in vitro cytotoxicity on 3 different cancer cell lines namely MCF-7, HCT-116, and HepG-2 in addition to 1 normal cell line to ensure its selectivity against cancer cells. The actual responses of the optimized IM formulation were 425.36 nm, -62.4 mV, 82.96%, 18.93%, and 89.45% for Y 1 , Y 2 , Y 3 , Y 4 , and Y 5 , respectively. The optimized IM-loaded niosomes confirmed the spherical vesicular shape imaged by both light and electron microscopes and further proven by differential scanning calorimetry. Moreover, the optimized formula exhibited improved stability on storage at 4 ± 2°C and superior efficacy on MCF7, HCT-116, and HepG2 as IC 50 values were 6.7, 16.4, and 7.3 folds less than those of free drug, respectively. Interestingly, IC 50 of the optimized formula against normal cell line was ranged from 3 to 11 folds higher than in different cancer cells indicating a higher selectivity of the optimized formula to cancer cells. In conclusion, the incorporation of IM in niosomes enhanced its efficacy and selectivity toward cancer cells, presenting a promising tool to fight cancer using this approach. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Marathon performance in relation to body fat percentage and training indices in recreational male runners

Directory of Open Access Journals (Sweden)

Tanda G

2013-05-01

Full Text Available Giovanni Tanda,1 Beat Knechtle2,31DIME, Università degli Studi di Genova, Genova, Italy; 2Gesundheitszentrum St Gallen, St Gallen, Switzerland; 3Institute of General Practice and Health Services Research, University of Zurich, Zurich, SwitzerlandBackground: The purpose of this study was to investigate the effect of anthropometric characteristics and training indices on marathon race times in recreational male marathoners.Methods: Training and anthropometric characteristics were collected for a large cohort of recreational male runners (n = 126 participating in the Basel marathon in Switzerland between 2010 and 2011.Results: Among the parameters investigated, marathon performance time was found to be affected by mean running speed and the mean weekly distance run during the training period prior to the race and by body fat percentage. The effect of body fat percentage became significant as it exceeded a certain limiting value; for a relatively low body fat percentage, marathon performance time correlated only with training indices.Conclusion: Marathon race time may be predicted (r = 0.81 for recreational male runners by the following equation: marathon race time (minutes = 11.03 + 98.46 exp(−0.0053 mean weekly training distance [km/week] + 0.387 mean training pace (sec/km + 0.1 exp(0.23 body fat percentage [%]. The marathon race time results were valid over a range of 165–266 minutes.Keywords: endurance, exercise, anthropometry

Effect of ripple loads on sustained-load cracking in titanium alloys

International Nuclear Information System (INIS)

Pao, P.S.; Meyn, D.A.; Bayles, R.A.; Feng, C.R.; Yoder, G.R.

1995-01-01

In the present paper, the authors have extended their study on the effect of the ripple loads on the sustained-load cracking (SLC) behavior of two titanium alloys, Ti-6Al-4V (an α-β alloy) and Ti-15V-3Cr-3Al-3Sn (a β-α alloy), in an ambient air environment. The methodology which has been used successfully to treat ripple effects on stress-corrosion cracking (SCC) is employed again to address the influence of ripple loads on sustained-load cracking. Ripple loads can significantly reduce the apparent sustained load cracking resistance of titanium alloys in a relatively benign environment such as ambient air. For a ripple-load amplitude equal to 5% of the sustained load, the ripple-load cracking thresholds (K IRLC ) of beta-annealed Ti-6Al-4V and Ti-15V-3Cr-3al-3Sn are less than half of the respective sustained-load cracking thresholds (K ISLC ). The extent of ripple-load degradation for these alloys in ambient air -- relative to K ISLC , were found comparable to those observed in a much more aggressive 3.5% NaCl aqueous solution

Data-Driven Machine-Learning Model in District Heating System for Heat Load Prediction: A Comparison Study

Directory of Open Access Journals (Sweden)

Fisnik Dalipi

2016-01-01

Full Text Available We present our data-driven supervised machine-learning (ML model to predict heat load for buildings in a district heating system (DHS. Even though ML has been used as an approach to heat load prediction in literature, it is hard to select an approach that will qualify as a solution for our case as existing solutions are quite problem specific. For that reason, we compared and evaluated three ML algorithms within a framework on operational data from a DH system in order to generate the required prediction model. The algorithms examined are Support Vector Regression (SVR, Partial Least Square (PLS, and random forest (RF. We use the data collected from buildings at several locations for a period of 29 weeks. Concerning the accuracy of predicting the heat load, we evaluate the performance of the proposed algorithms using mean absolute error (MAE, mean absolute percentage error (MAPE, and correlation coefficient. In order to determine which algorithm had the best accuracy, we conducted performance comparison among these ML algorithms. The comparison of the algorithms indicates that, for DH heat load prediction, SVR method presented in this paper is the most efficient one out of the three also compared to other methods found in the literature.

45 CFR 305.33 - Determination of applicable percentages based on performance levels.

Science.gov (United States)

2010-10-01

..., DEPARTMENT OF HEALTH AND HUMAN SERVICES PROGRAM PERFORMANCE MEASURES, STANDARDS, FINANCIAL INCENTIVES, AND PENALTIES § 305.33 Determination of applicable percentages based on performance levels. (a) A State's... performance levels. 305.33 Section 305.33 Public Welfare Regulations Relating to Public Welfare OFFICE OF...

Low cognitive load strengthens distractor interference while high load attenuates when cognitive load and distractor possess similar visual characteristics.

Science.gov (United States)

Minamoto, Takehiro; Shipstead, Zach; Osaka, Naoyuki; Engle, Randall W

2015-07-01

Studies on visual cognitive load have reported inconsistent effects of distractor interference when distractors have visual characteristic that are similar to the cognitive load. Some studies have shown that the cognitive load enhances distractor interference, while others reported an attenuating effect. We attribute these inconsistencies to the amount of cognitive load that a person is required to maintain. Lower amounts of cognitive load increase distractor interference by orienting attention toward visually similar distractors. Higher amounts of cognitive load attenuate distractor interference by depleting attentional resources needed to process distractors. In the present study, cognitive load consisted of faces (Experiments 1-3) or scenes (Experiment 2). Participants performed a selective attention task in which they ignored face distractors while judging a color of a target dot presented nearby, under differing amounts of load. Across these experiments distractor interference was greater in the low-load condition and smaller in the high-load condition when the content of the cognitive load had similar visual characteristic to the distractors. We also found that when a series of judgments needed to be made, the effect was apparent for the first trial but not for the second. We further tested an involvement of working memory capacity (WMC) in the load effect (Experiment 3). Interestingly, both high and low WMC groups received an equivalent effect of the cognitive load in the first distractor, suggesting these effects are fairly automatic.

Allostatic Load Assessment for Early Detection of Stress in the Workplace in Egypt.

Science.gov (United States)

Ali, Ola Sayed; Badawy, Nadia; Rizk, Sanaa; Gomaa, Hend; Saleh, Mai Sabry

2016-09-15

Workplace stress is hazardous for its harmful impact on employees' health and organizational productivity. The aim of the study is to apply the Allostatic Load Index (ALI) which is a multi-component measure for health risk assessment and early detection of stress among workers in Egypt. Sixty-two working adults randomly selected from two different working environments in Egypt were included in the study. Participants completed a self-reported questionnaire for socio-demographic and work variables. Andrews and Withey test for Job Satisfaction was filled and 3 ml blood samples were collected. Markers assessed for Allostatic Load were serum cortisol, c-reactive protein, dehydroepiandrosterone-sulphate, total thyroxine, total cholesterol, triglycerides, low-density lipoprotein, high-density lipoprotein, total cholesterol to high-density lipoprotein ratio, systolic and diastolic blood pressures, waist to hip ratio and body mass index. The risk quartile method was used for calculation of ALI. ALI value of four or more indicates high Allostatic Load. Job satisfaction scale defined about a quarter of the study population (24%) to be dissatisfied with Allostatic Load of 2.4 as the mean value. Population percentage with ALI ≥4 reached 12.9% with 100% of them females. A significant association was found between Allostatic Load of primary mediators and age, the presence of chronic diseases, place of work and female gender. Female gender and the old age of the Egyptian workforce under study are at higher risk of chronic diseases. Using an alternative way -for example, the cut-point method- instead of the risk quartiles for dichotomization of markers used in ALI calculation could be more precise for early detection of stress among healthy individuals.

Correlation of Leukocyte Count and Percentage of Segmented Neutrophils with Pathohistological Findings of Appendix in Children

Directory of Open Access Journals (Sweden)

Marko Baskovic

2018-01-01

Full Text Available BackgroundAppendicitis is the most common indication for an emergency operation in children's age. Although none of the laboratory values has not high sensitivity and specificity for the diagnosis of appendicitis, leukocyte count and the percentage of segmented neutrophils are most commonly used. The aim of this study was to determine whether there is a statistically significant correlation between leukocyte count and the percentage of segmented neutrophils compared to the pathohistological finding of appendix in children. Materials and MethodsWe retrospectively analyzed the data in the period from 1 January 2016 to 31 December 2016. The analysis was made on 211 patients. Spearman's correlation coefficient (rs was calculated. We determined the specificity and sensitivity of leukocyte count and the percentage of segmented neutrophils used in the calculation of Alvorado and Pediatric Appendicitis score.ResultsThe results of the research have shown that the correlation between leukocyte count and the pathohistological findings is weak (rs = 0.29, p = 3.61*10-8, while there is no correlation between the percentage of segmented neutrophils and pathohistological findings (rs = 0.18, p = 7.08 *10-5. The sensitivity of leukocyte count is 93% and the specificity is 30%, while the sensitivity to the percentage of segmented neutrophils is 71% and the specificity is 50%. ROC analysis for leukocytes shows area under the curve of 0.648, while for segmented neutrophils of 0.574.ConclusionGiven the correlation results obtained, the clinical experience of physicians will still have one of the leading roles in diagnosing acute appendicitis in children.

Influence of Axial Load on Electromechanical Impedance (EMI) of Embedded Piezoceramic Transducers in Steel Fiber Concrete.

Science.gov (United States)

Wang, Zhijie; Chen, Dongdong; Zheng, Liqiong; Huo, Linsheng; Song, Gangbing

2018-06-01

With the advantages of high tensile, bending, and shear strength, steel fiber concrete structures have been widely used in civil engineering. The health monitoring of concrete structures, including steel fiber concrete structures, receives increasing attention, and the Electromechanical Impedance (EMI)-based method is commonly used. Structures are often subject to changing axial load and ignoring the effect of axial forces may introduce error to Structural Health Monitoring (SHM), including the EMI-based method. However, many of the concrete structure monitoring algorithms do not consider the effects of axial loading. To investigate the influence of axial load on the EMI of a steel fiber concrete structure, concrete specimens with different steel fiber content (0, 30, 60, 90, 120) (kg/m³) were casted and the Lead Zirconate Titanate (PZT)-based Smart Aggregate (SA) was used as the EMI sensor. During tests, the step-by-step loading procedure was applied on different steel fiber content specimens, and the electromechanical impedance values were measured. The Normalized root-mean-square deviation Index (NI) was developed to analyze the EMI information and evaluate the test results. The results show that the normalized root-mean-square deviation index increases with the increase of the axial load, which clearly demonstrates the influence of axial load on the EMI values for steel fiber concrete and this influence should be considered during a monitoring or damage detection procedure if the axial load changes. In addition, testing results clearly reveal that the steel fiber content, often at low mass and volume percentage, has no obvious influence on the PZT's EMI values. Furthermore, experiments to test the repeatability of the proposed method were conducted. The repeating test results show that the EMI-based indices are repeatable and there is a great linearity between the NI and the applied loading.

Influence of Axial Load on Electromechanical Impedance (EMI of Embedded Piezoceramic Transducers in Steel Fiber Concrete

Directory of Open Access Journals (Sweden)

Zhijie Wang

2018-06-01

Full Text Available With the advantages of high tensile, bending, and shear strength, steel fiber concrete structures have been widely used in civil engineering. The health monitoring of concrete structures, including steel fiber concrete structures, receives increasing attention, and the Electromechanical Impedance (EMI-based method is commonly used. Structures are often subject to changing axial load and ignoring the effect of axial forces may introduce error to Structural Health Monitoring (SHM, including the EMI-based method. However, many of the concrete structure monitoring algorithms do not consider the effects of axial loading. To investigate the influence of axial load on the EMI of a steel fiber concrete structure, concrete specimens with different steel fiber content (0, 30, 60, 90, 120 (kg/m3 were casted and the Lead Zirconate Titanate (PZT-based Smart Aggregate (SA was used as the EMI sensor. During tests, the step-by-step loading procedure was applied on different steel fiber content specimens, and the electromechanical impedance values were measured. The Normalized root-mean-square deviation Index (NI was developed to analyze the EMI information and evaluate the test results. The results show that the normalized root-mean-square deviation index increases with the increase of the axial load, which clearly demonstrates the influence of axial load on the EMI values for steel fiber concrete and this influence should be considered during a monitoring or damage detection procedure if the axial load changes. In addition, testing results clearly reveal that the steel fiber content, often at low mass and volume percentage, has no obvious influence on the PZT’s EMI values. Furthermore, experiments to test the repeatability of the proposed method were conducted. The repeating test results show that the EMI-based indices are repeatable and there is a great linearity between the NI and the applied loading.

The percentage of iNKT cells among other immune cells at various clinical stages of laryngeal cancer

Directory of Open Access Journals (Sweden)

Janusz Klatka

2016-04-01

Full Text Available Introduction: Invariant natural killer T (iNKT cells constitute a small population of immune cells that share functional and phenotypic characteristics of T lymphocytes and NK cells. Due to their involvement in specific and non-specific immune responses, iNKT cells may represent an important component of antitumor and anti-infectious immunity. Material and methods: Using flow cytometry, we analyzed the percentages of iNKT cells as well as T and B lymphocytes in peripheral blood of 50 laryngeal cancer patients at various clinical stages in comparison to healthy controls (n=15. Moreover, we determined the expression of CD25, CD69 and CD95 antigens on T lymphocytes.Results: The percentage of CD4+/CD3+ T lymphocytes in the controls was higher than in laryngeal cancer patients, both with early and late stages of the disease. The percentage of CD8+/CD3+ T lymphocytes in healthy controls was lower than in patients with early and late clinical stages of laryngeal cancer. Patients with advanced laryngeal cancer showed a lower percentage of iNKT cells and higher frequencies of T regulatory cells (Tregs than the controls. Advanced clinical stages of laryngeal cancer are associated with impaired activation of lymphocytes.Conclusions: Our study confirmed that laryngeal cancer cells exert a strong suppressor effect on the immune system of the host. This is reflected by a decrease in the percentage of iNKT cells that are capable of cancer cell elimination, and a concomitant increase in the percentage of Tregs. However, further studies are needed in order to explain the underlying mechanisms of immunosuppression and understand interactions between immune and cancer cells.

Technical Potential for Peak Load Management Programs in New Jersey

Energy Technology Data Exchange (ETDEWEB)

Kirby, B.J.

2002-12-13

producers and consumers. Fortunately too, only a percentage of loads need to respond elastically for all customers to benefit. This report explores mechanisms to reduce, when necessary, the peak load in New Jersey's electricity market. It examines load pricing and technical load reduction programs used in recent years in New Jersey and discuss how they can be made more effective in controlling summer peaks and attendant high prices of electricity. Particular attention is given to load curtailment programs now in place and utility opinions relating to them.

Characterization of suspended solids and total phosphorus loadings from small watersheds in Wisconsin

Science.gov (United States)

Danz, Mari E.; Corsi, Steven R.; Graczyk, David J.; Bannerman, Roger T.

2010-01-01

early summer (June through July), with fall (October through November) and early winter (December through January) contributing the smallest loadings. The Northern Lakes and Forests/North Central Hardwoods region had some substantial loading in September. There was a similar pattern for total phosphorus loading in all regions, with the pattern somewhat less pronounced in urban watersheds. As with the loading results, average monthly streamflow values were greatest in late winter, spring, and early summer, with the lowest values typically in fall and early winter. Loading contributions were greater from stormflow than from base flow in all instances, except total phosphorus in the Northern Lakes and Forests/North Central Hardwoods region, which had equal or greater base-flow contribution for several months. Base flow constituted a greater percentage of the total streamflow than stormflow in all rural watersheds for all regions. Only a few storms each year dominated the annual loading totals for solids and total phosphorus. When daily loading values were ranked for the year, all regions reached 50 percent of the annual solids loading in the 5 highest loading days and nearly 50 percent of the annual total phosphorus loading in the 14 highest loading days.

抗肠道病毒71型特异性卵黄抗体的制备及鉴定%Preparation and identification of specific chicken egg yolk immunoglobulins against enterovirus 71

Institute of Scientific and Technical Information of China (English)

朱思思; 赵肃清; 李月明; 温俊林

2011-01-01

0bjsctive iPreparhg specificity chicken egg yolk antibody (IgY ) against enteiovius 71 (EV 71) and detecting its biobgical activities,this is significantfor prevention and treatnentof EV 71 infection .M ethods:Fourhensweie inmurmed Ihree tineswiih tie purified him an EV71 virus as an antigen .The inmunogbbulh Y (IgY ) antibody was extracted and purified from tie egg yolk by water combine pofyeihylene gfycol (water-peg) m eihod .The yield and molecularm ass of IgY were analysed by Bradford m eihod and SDS-PAGE electrophore- sis.ELBA and A gar double in munodiffusbn were used for detect 1he titer of IgY ,while tie inmunoreactivily of antHiV71 IgY was tested using W estem bbt.Results :The yield and purily of IgY were 7 .76 m g/m land 94.86% respective^ .Results of ELBA hdicated 1hat1he specific an- trEV71 IgY antibody appealed in tie egg yolk 10 days afterprinary inmuniation and reached 1he highest titer 1 = 20 480 after 40 days,while 1he titer of A gar double in m unodiffusion was 1 = 16 .W estem bbt analysis revealed lhattie purified IgY antibody owned good inmunoreactivily and a specifically combination capacily of EV71 virus.Conclusbn :Egg yolk is a large scale source of antidodys specifically against EV 71 virus .The antrEV 71 IgY extracted and purified by W aterPEG m etiod possess good production ,purtly ,and bbbgical activities.%目的:制备特异性抗肠道病毒71型(Enterovirus 71,EV71)的卵黄抗体并检测其生物学性能,这对EV71感染手足口病的预防和治疗具有重大的意义.方法:用纯化并灭活后EV71作为抗原免疫健康产蛋鸡.采用本实验室水提综合聚乙二醇法提取纯化鸡卵黄抗体;用Bradford法测定卵黄抗体提取液的蛋白含量;还原性SDS-PAGE凝胶电泳分析测定提取蛋白的纯度及相对分子质量;分别用ELISA、双向免疫琼脂扩散检测纯化特异性卵黄抗体抗EV71效价;Western blot分析特异性卵黄抗体的免疫反应性.结果:卵黄中卵黄抗体含量达7.76 mg

Distribution load estimation (DLE)

Energy Technology Data Exchange (ETDEWEB)

Seppaelae, A; Lehtonen, M [VTT Energy, Espoo (Finland)

1998-08-01

The load research has produced customer class load models to convert the customers` annual energy consumption to hourly load values. The reliability of load models applied from a nation-wide sample is limited in any specific network because many local circumstances are different from utility to utility and time to time. Therefore there is a need to find improvements to the load models or, in general, improvements to the load estimates. In Distribution Load Estimation (DLE) the measurements from the network are utilized to improve the customer class load models. The results of DLE will be new load models that better correspond to the loading of the distribution network but are still close to the original load models obtained by load research. The principal data flow of DLE is presented

Residential Load Manageability Factor Analyses by Load Sensitivity Affected by Temperature

Directory of Open Access Journals (Sweden)

N. Eskandari

2016-12-01

Full Text Available Load side management is the basic and significant principle to keeping the balance between generation side and consumption side of electrical power energy. Load side management on typical medium voltage feeder is the power energy consumption control of connected loads with variation of essential parameters that loads do reaction to their variation. Knowing amount of load's reaction to each parameters variation in typical medium voltage feeder during the day, leads to gain Load Manageability Factor (LMF for that specific feeder that helps power utilities to manage their connected loads. Calculating this LMF needs to find out each types of load with unique inherent features behavior to each parameters variation. This paper results and future work results will help us to catch mentioned LMF. In this paper analysis of residential load behavior due to temperature variation with training artificial neural network will be done. Load behavior due to other essential parameters variations like energy pricing variation, major event happening, and power utility announcing to the customers, and etc will study in future works. Collecting all related works results in a unit mathematical equation or an artificial neural network will gain LMF.

Opposite Effects of Capacity Load and Resolution Load on Distractor Processing

OpenAIRE

Zhang, Weiwei; Luck, Steven J.

2014-01-01

According to the load theory of attention, an increased perceptual load reduces distractor processing whereas an increased working memory load facilitates distractor processing. Here we raise the possibility that the critical distinction may instead be between an emphasis on resolution and an emphasis on capacity. That is, perceptual load manipulations typically emphasize resolution (fine-grained discriminations), whereas working memory load manipulations typically emphasize capacity (simulta...

Retention Strength after Compressive Cyclic Loading of Five Luting Agents Used in Implant-Supported Prostheses

Directory of Open Access Journals (Sweden)

Angel Alvarez-Arenal

2016-01-01

Full Text Available The purpose of this study was to evaluate and compare the retention strength of five cement types commonly used in implant-retained fixed partial dentures, before and after compressive cyclic loading. In five solid abutments screwed to 5 implant analogs, 50 metal Cr-Ni alloy copings were cemented with five luting agents: resin-modified glass ionomer (RmGI, resin composite (RC, glass ionomer (GI, resin urethane-based (RUB, and compomer cement (CC. Two tensile tests were conducted with a universal testing machine, one after the first luting of the copings and the other after 100,000 cycles of 100 N loading at 0.72 Hz. The one way ANOVA test was applied for the statistical analysis using the post hoc Tukey test when required. Before and after applying the compressive load, RmGI and RC cement types showed the greatest retention strength. After compressive loading, RUB cement showed the highest percentage loss of retention (64.45%. GI cement recorded the lowest retention strength (50.35 N and the resin composite cement recorded the highest (352.02 N. The type of cement influences the retention loss. The clinician should give preference to lower retention strength cement (RUB, CC, and GI if he envisages any complications and a high retention strength one (RmGI, RC for a specific clinical situation.

Percentage and function of CD4+CD25+ regulatory T cells in patients with hyperthyroidism

Science.gov (United States)

Jiang, Ting-Jun; Cao, Xue-Liang; Luan, Sha; Cui, Wan-Hui; Qiu, Si-Huang; Wang, Yi-Chao; Zhao, Chang-Jiu; Fu, Peng

2018-01-01

The current study observed the percentage of peripheral blood (PB) CD4+CD25+ regulatory T cells (Tregs) and the influence of CD4+CD25+ Tregs on the proliferation of naïve CD4 T cells in patients with hyperthyroidism. Furthermore, preliminary discussions are presented on the action mechanism of CD4+CD25+ Tregs on hyperthyroidism attacks. The present study identified that compared with the percentage of PB CD4+CD25+ Tregs in healthy control subjects, no significant changes were observed in the percentage of PB CD4+CD25+ Tregs in patients with hyperthyroidism (P>0.05). For patients with hyperthyroidism, CD4+CD25+ Tregs exhibited significantly reduced inhibition of the proliferation of naïve CD4 T cells and decreased secretion capacity on the cytokines of CD4 T cells, compared with those of healthy control subjects (Phyperthyroidism was significantly improved (Phyperthyroidism before treatment, no significant changes were observed in the percentage of PB CD4+CD25+ Tregs in hyperthyroidism patients following treatment (P>0.05). In the patients with hyperthyroidism, following treatment, CD4+CD25+ Tregs exhibited significantly increased inhibition of the proliferation of naïve CD4 T cells and increased secretion capacity of CD4 T cell cytokines, compared with those of the patients with hyperthyroidism prior to treatment (Phyperthyroidism, and its non-proportional decrease may be closely associated with the occurrence and progression of hyperthyroidism. PMID:29207121

Pay for load demand - electricity pricing with load demand component

International Nuclear Information System (INIS)

Pyrko, Jurek; Sernhed, Kerstin; Abaravicius, Juozas

2003-01-01

This publication is part of a project called Direct and Indirect Load Control in Buildings. Peak load problems have attracted considerable attention in Sweden during last three winters, caused by a significant decrease in available reserve power, which is a consequence of political decisions and liberalisation of the electricity market. A possible way to lower peak loads, avoiding electricity shortages and reducing electricity costs both for users and utilities, is to make customers experience the price difference during peak load periods and, in this way, become more aware of their energy consumption pattern and load demand. As of January 1st 2001, one of the Swedish energy utilities - Sollentuna Energi - operating in the Stockholm area, introduced a new electricity tariff with differentiated grid fees based on a mean value of the peak load every month. This tariff was introduced for all residential customers in the service area. The objective of this study is to investigate the extent to which a Load Demand Component, included in electricity pricing, can influence energy use and load demand in residential buildings. What are the benefits and disadvantages for customers and utilities? This paper investigates the impact of the new tariff on the utility and different types of typical residential customers, making comparisons with previous tariff. Keywords Load demand, electricity pricing, tariff, residential customers, energy behaviour

[Isolation of cariogenic Streptococcus mutans and the inhibitory effect of egg yolk antibody on caries].

Science.gov (United States)

Li, X L; Zhang, Z; Li, Z X; Deng, N J; Zeng, B; Chen, Y M

2017-04-09

Objective: To isolate the cariogenic Streptococcus mutans (Sm) strains and study the therapeutical effect of egg yolk antibody (IgY) of the Sm on dental caries development. Methods: Sm strains were isolated from the children's dental plaque samples. Morphological, biochemical and molecular biological methods were applied to identify the serotype, acid producing and adhesion abilities of isolated Sm strains. After inactivation one of the Sm strains was used as antigen to immune laying hens to collect and extract the specific anti-Sm IgY. The rats were infected with Sm (serotype e). After 16 weeks of infection, all the rats were found developing dental caries. The rats were then randomly divided into two groups. The rats in experimental group were supplied with diet containing anti-Sm IgY while the rats in control group with normal IgY. All rats were sacrificed after another 8 weeks' observation. The degree of caries for each rat was assessed using Keyes' method. Results: We isolated 7 Sm strains from the children's dental plaque samples in the present study. The numbers of serotype c, e, f, k were 3, 2, 0 and 2, respectively. All strains showed similar morphological and biochemical characters as standard UA159 Sm strain, and possessed strong capabilities of acid production and adherence. Interestingly, even the same serotypec strains, such as No.3 and No.7 strains, demonstrated significant difference on acid producing and adherence capabilities. After 16 weeks infection with serotype e strain, the rats' mandibular teeth were apparently decayed, and treatment with specific anti-Sm IgY obviously attenuated the development of caries in the experiment group rats (16.4±2.0) compared with that in the control group rats (30.2±9.3) ( Pcariogenic Sm strains of different serotypes were isolated, which possesses similar morphology and biochemical characters. Although belonging to the same serotype strains they always show significant difference in acid-producing and

Weight Percentage of Calcium Carbonate for 17 Equatorial Pacific Cores from Brown University

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Weight percentages of calcium carbonate in this file were compiled by J. Farrell and W. L. Prell of Brown University for 17 equatorial Pacific Ocean sediment cores....

Alternatives to accuracy and bias metrics based on percentage errors for radiation belt modeling applications

Energy Technology Data Exchange (ETDEWEB)

Morley, Steven Karl [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-07-01

This report reviews existing literature describing forecast accuracy metrics, concentrating on those based on relative errors and percentage errors. We then review how the most common of these metrics, the mean absolute percentage error (MAPE), has been applied in recent radiation belt modeling literature. Finally, we describe metrics based on the ratios of predicted to observed values (the accuracy ratio) that address the drawbacks inherent in using MAPE. Specifically, we define and recommend the median log accuracy ratio as a measure of bias and the median symmetric accuracy as a measure of accuracy.

The percentage of bacterial genes on leading versus lagging strands is influenced by multiple balancing forces

Science.gov (United States)

Mao, Xizeng; Zhang, Han; Yin, Yanbin; Xu, Ying

2012-01-01

The majority of bacterial genes are located on the leading strand, and the percentage of such genes has a large variation across different bacteria. Although some explanations have been proposed, these are at most partial explanations as they cover only small percentages of the genes and do not even consider the ones biased toward the lagging strand. We have carried out a computational study on 725 bacterial genomes, aiming to elucidate other factors that may have influenced the strand location of genes in a bacterium. Our analyses suggest that (i) genes of some functional categories such as ribosome have higher preferences to be on the leading strands; (ii) genes of some functional categories such as transcription factor have higher preferences on the lagging strands; (iii) there is a balancing force that tends to keep genes from all moving to the leading and more efficient strand and (iv) the percentage of leading-strand genes in an bacterium can be accurately explained based on the numbers of genes in the functional categories outlined in (i) and (ii), genome size and gene density, indicating that these numbers implicitly contain the information about the percentage of genes on the leading versus lagging strand in a genome. PMID:22735706

Brief Report: On the Concordance Percentages for Autistic Spectrum Disorder of Twins

Science.gov (United States)

Bohm, Henry V.; Stewart, Melbourne G.

2009-01-01

In the development of genetic theories of Autistic Spectrum Disorder (ASD) various characteristics of monozygotic (MZ) and dizygotic (DZ) twins are often considered. This paper sets forth a possible refinement in the interpretation of the MZ twin concordance percentages for ASD underlying such genetic theories, and, drawing the consequences from…

A Record Holder Female Athlete’s Train ing Loads and its Distribution in Women 400 meter Hurdle Running

Directory of Open Access Journals (Sweden)

Sibel DÜNDAR

2015-07-01

Full Text Available The purpose of this study was to investigate the effects on 400 mt characteristics of women training load used in the hurdle runnig , the distribution and performance according to the period. At this study female athlete’s, who won second place at the European Champion Clubs' Cup Competitions and had a record - breaking six times in a country, five - year training loads and degrees were investigated. In this study, athlete’s degrees an d training loads were analyzed between the years of 1982 - 1987. Atlete’s best 100m,200m,400m,400m hurdle degrees and some training loads (sprint, andurance, weight lifting were assessed by the means and satandart deviations. Athlete’s sprint and training l oads mean and standard deviation values were calculated as 100 m ( 11.96 ± 0.17 , 200m ( 25.0 ± 0.38 , 400m ( 56.07 ± 0.91 and 400 m hurdle running ( 60.38 ± 1.88 and for the training loads of 0 - 150 m sprint ( 66.85 ± 18.95 m, endurance ( 2 02.55 ± 57.56 miles and weightlifting( 151.88 ± 68.2 tons. It was observed that percentage of change of the value of training loads and the running performance changes were not increase at the same rate. Regarding the relationship between the best run ning degree and training load, it was found a significant relationship between only 60 m sprint and 150 - 450 m sprint degrees.

Gut-Associated Lymphoid Tissue: A Key Tissue Inside the Mucosal Immune System of Hens Immunized with Escherichia coli F4.

Science.gov (United States)

Peralta, Maria F; Magnoli, Alejandra; Alustiza, Fabrisio; Nilson, Armando; Miazzo, Raúl; Vivas, Adriana

2017-01-01

Immunoglobulin Y (IgY) is the predominant antibody found in hen's ( Gallus domesticus ) egg yolk. This antibody, developed against several microorganisms in hen egg yolk, has been successfully used as an alternative to immunoglobulins from mammals for use in immunodiagnostics and immunotherapy. Enteropathogenic Escherichia coli (E.coli) F 4 is the main etiological agent associated with swine neonatal diarrhea, and it causes notable economic losses in swine production. The aim of the present study was to evaluate the relationship between humoral immune response and the activation of gut-associated lymphoid tissue (GALT) in laying hens intramuscularly immunized with E. coli F 4 . Adult laying Shaver hens were immunized with a bacterin based on an inactivated lysate E. coli F 4 strain that was originally isolated from neonatal piglet diarrhea, following a recommended schedule. The percentage of B lymphocytes in blood and spleen homogenates was determined by flow cytometry. Villi histomorphometry and the size of germinal centers (GC) activated in GALT and the spleen were measured in histological samples either stained with hematoxylin/eosin or through immunofluorescence. Antibody and isotype-specific antibodies in serum and egg yolk were measured using indirect enzyme-linked immunosorbent assay (ELISA). Secretory and serum immunoglobulin A (IgA) were measured by ELISA tests. Laying hen with intramuscular immunization with E. coli F 4 lysate, activated both mucosal and systemic protection. Mucosal protection was provided through B lymphocytes, and most of them were activated on Peyer's patches and esophageal tonsils, in GALT. Furthermore, increased B lymphocyte number in the lamina propria of the gut, and increased intraepithelial plasmatic cell number, produced high levels of mucosal IgA. Activated B lymphocytes interacted with absorptive cells, immune cells, and microbiota in the gut, producing signals that were translated into a powerful physical defense by producing

Structural load combinations

International Nuclear Information System (INIS)

Hwang, H.; Reich, M.; Ellingwood, B.; Shinozuka, M.

1985-01-01

This paper presents the latest results of the program entitled, ''Probability Based Load Combinations For Design of Category I Structures''. In FY 85, a probability-based reliability analysis method has been developed to evaluate safety of shear wall structures. The shear walls are analyzed using stick models with beam elements and may be subjected to dead load, live load and in-plane eqrthquake. Both shear and flexure limit states are defined analytically. The limit state probabilities can be evaluated on the basis of these limit states. Utilizing the reliability analysis method mentioned above, load combinations for the design of shear wall structures have been established. The proposed design criteria are in the load and resistance factor design (LRFD) format. In this study, the resistance factors for shear and flexure and load factors for dead and live loads are preassigned, while the load factor for SSE is determined for a specified target limit state probability of 1.0 x 10 -6 or 1.0 x 10 -5 during a lifetime of 40 years. 23 refs., 9 tabs

Structural load combinations

International Nuclear Information System (INIS)

Hwang, H.; Reich, M.; Ellingwood, B.; Shinozuka, M.

1986-01-01

This paper presents the latest results of the program entitled, ''Probability Based Load Combinations For Design of Category I Structures''. In FY 85, a probability-based reliability analysis method has been developed to evaluate safety of shear wall structures. The shear walls are analyzed using stick models with beam elements and may be subjected to dead load, live load and in-plane earthquake. Both shear and flexure limit states are defined analytically. The limit state probabilities can be evaluated on the basis of these limit states. Utilizing the reliability analysis method mentioned above, load combinations for the design of shear wall structures have been established. The proposed design criteria are in the load and resistance factor design (LRFD) format. In this study, the resistance factors for shear and flexure and load factors for dead and live loads are preassigned, while the load factor for SSE is determined for a specified target limit state probability of 1.0 x 10 -6 or 1.0 x 10 -5 during a lifetime of 40 years

The Effects of Water Parameters on Monthly Seagrass Percentage Cover in Lawas, East Malaysia

Science.gov (United States)

Ahmad-Kamil, E. I.; Ramli, R.; Jaaman, S. A.; Bali, J.; Al-Obaidi, J. R.

2013-01-01

Seagrass is a valuable marine ecosystem engineer. However, seagrass population is declining worldwide. The lack of seagrass research in Malaysia raises questions about the status of seagrasses in the country. The seagrasses in Lawas, which is part of the coral-mangrove-seagrass complex, have never been studied in detail. In this study, we examine whether monthly changes of seagrass population in Lawas occurred. Data on estimates of seagrass percentage cover and water physicochemical parameters (pH, turbidity, salinity, temperature, and dissolved oxygen) were measured at 84 sampling stations established within the study area from June 2009 to May 2010. Meteorological data such as total rainfall, air temperature, and Southern Oscillation Index were also investigated. Our results showed that (i) the monthly changes of seagrass percentage cover are significant, (ii) the changes correlated significantly with turbidity measurements, and (iii) weather changes affected the seagrass populations. Our study indicates seagrass percentage increased during the El-Nino period. These results suggest that natural disturbances such as weather changes affect seagrass populations. Evaluation of land usage and measurements of other water physicochemical parameters (such as heavy metal, pesticides, and nutrients) should be considered to assess the health of seagrass ecosystem at the study area. PMID:24163635

Distribution load estimation - DLE

Energy Technology Data Exchange (ETDEWEB)

Seppaelae, A. [VTT Energy, Espoo (Finland)

1996-12-31

The load research project has produced statistical information in the form of load models to convert the figures of annual energy consumption to hourly load values. The reliability of load models is limited to a certain network because many local circumstances are different from utility to utility and time to time. Therefore there is a need to make improvements in the load models. Distribution load estimation (DLE) is the method developed here to improve load estimates from the load models. The method is also quite cheap to apply as it utilises information that is already available in SCADA systems

Distribution load estimation - DLE

Energy Technology Data Exchange (ETDEWEB)

Seppaelae, A [VTT Energy, Espoo (Finland)

1997-12-31

The load research project has produced statistical information in the form of load models to convert the figures of annual energy consumption to hourly load values. The reliability of load models is limited to a certain network because many local circumstances are different from utility to utility and time to time. Therefore there is a need to make improvements in the load models. Distribution load estimation (DLE) is the method developed here to improve load estimates from the load models. The method is also quite cheap to apply as it utilises information that is already available in SCADA systems

Looking Forward to the electronic Geophysical Year

Science.gov (United States)

Kamide, Y.; Baker, D. N.; Thompson, B.; Barton, C.; Kihn, E.

2004-12-01

During the International Geophysical Year (1957-1958), member countries established many new capabilities pursuing the major IGY objectives of collecting geophysical data as widely as possible and providing free access to these data for all scientists around the globe. A key achievement of the IGY was the establishment of a worldwide system of data centers and physical observatories. The worldwide scientific community has now endorsed and is promoting an electronic Geophysical Year (eGY) initiative. The proposed eGY concept would both commemorate the 50th anniversary of the IGY in 2007-2008 and would provide a forward impetus to geophysics in the 21st century, similar to that provide by the IGY fifty years ago. The eGY concept advocates the establishment of a series of virtual geophysical observatories now being deployed in cyberspace. We discuss plans to aggregate measurements into a readily accessible database along with analysis, visualization, and display tools that will make information available and useful to the scientific community, to the user community, and to the general public. We are examining the possibilities for near-realtime acquisition of data and utilization of forecast tools in order to provide users with advanced space weather capabilities. This program will provide powerful tools for education and public outreach concerning the connected Sun-Earth System.

13 CFR 120.210 - What percentage of a loan may SBA guarantee?

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What percentage of a loan may SBA guarantee? 120.210 Section 120.210 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS... percent, except as otherwise authorized by law. [61 FR 3235, Jan. 31, 1996, as amended at 68 FR 51680, Aug...

Mechanical behavior of glass/epoxy composite laminate with varying amount of MWCNTs under different loadings

Science.gov (United States)

Singh, K. K.; Rawat, Prashant

2018-05-01

This paper investigates the mechanical response of three phased (glass/MWCNTs/epoxy) composite laminate under three different loadings. Flexural strength, short beam strength and low-velocity impact (LVI) testing are performed to find an optimum doping percentage value for maximum enhancement in mechanical properties. In this work, MWCNTs were used as secondary reinforcement for three-phased composite plate. MWCNT doping was done in a range of 0–4 wt% of the thermosetting matrix system. Symmetrical design eight layered glass/epoxy laminate with zero bending extension coupling laminate was fabricated using a hybrid method i.e. hand lay-up technique followed by vacuum bagging method. Ranging analysis of MWCNT mixing highlighted the enhancement in flexural, short beam strength and improvement in damage tolerance under LVI loading. While at higher doping wt%, agglomeration of MWCNTs are observed. Results of mechanical testing proposed an optimized doping value for maximum strength and damage resistance of the laminate.

Hydraulic conductivity in response to exchangeable sodium percentage and solution salt concentration

Directory of Open Access Journals (Sweden)

Jefferson Luiz de Aguiar Paes

2014-10-01

Full Text Available Hydraulic conductivity is determined in laboratory assays to estimate the flow of water in saturated soils. However, the results of this analysis, when using distilled or deionized water, may not correspond to field conditions in soils with high concentrations of soluble salts. This study therefore set out to determine the hydraulic conductivity in laboratory conditions using solutions of different electrical conductivities in six soils representative of the State of Pernambuco, with the exchangeable sodium percentage adjusted in the range of 5-30%. The results showed an increase in hydraulic conductivity with both decreasing exchangeable sodium percentage and increasing electrical conductivity in the solution. The response to the treatments was more pronounced in soils with higher proportion of more active clays. Determination of hydraulic conductivity in laboratory is routinely performed with deionized or distilled water. However, in salt affected soils, these determinations should be carried out using solutions of electrical conductivity different from 0 dS m-1, with values close to those determined in the saturation extracts.

Effect of pollen load size and source (self, outcross) on seed and fruit production in highbush blueberry cv. 'Bluecrop' (VACCINIUM CORYMBOSUM; Ericaceae).

Science.gov (United States)

Dogterom, M H; Winston, M L; Mukai, A

2000-11-01

Reproductive fitness of a plant is ultimately determined by both number and quality of seed offspring. This is determined by sexual selection of pollen microspores and ovules during pollination and fertilization. These processes may include pollen competition and seed abortion, which reduce the number of microspores and ovules available for final seed production. Thus, even an excess of pollen microspores to ovules does not result in fertile seeds equal to ovule number. We investigated pollen requirements of highbush blueberry (Vaccinium corymbosum cultivar 'Bluecrop') for maximal seed production and how fertile seed number translates into fruit quality, since fruit quality would ultimately determine the dispersal of its offspring. We demonstrate that individual blueberry flowers with a mean of 106 ovules reach their maximum fruit set and mass and minimum time to ripen when 125 outcross pollen tetrads pollinate a flower, compared to 10 or 25. Three hundred tetrads resulted in the increase of fertile seeds, but did not result in a further increase of fruit mass or fruit set, or decrease in time to ripen. We also examined the effect of pure and mixed loads of self and outcross pollen (25 and 125 tetrads), and found no differences in fertile seed number, fruit mass, or percentage fruit set when pollen loads were either 25 self or outcross pollen tetrads, although number of days to ripen was significantly shorter by 8 d with 25 outcross tetrads. When the pollen load of 125 tetrads consisted of self or a 50:50 mixture of self and outcross pollen, fruit mass, days to ripen, and percentage fruit set were not different from loads of 125 outcross pollen. In addition, a pollen load of 25 outcross tetrads resulted in fertile seed number and fruit quality in between that of 25 self, and 125 self, 125 mixed, or 125 outcross tetrads. Large, small, and flat seed types were identified, and only large seeds (length = 1.7 mm) were fertile. These results improve our understanding of

Higher percentage of CD133+ cells is associated with poor prognosis in colon carcinoma patients with stage IIIB

Directory of Open Access Journals (Sweden)

Zhang Xin

2009-07-01

Full Text Available Abstract Background Cancer stem cell model suggested that tumor progression is driven by the overpopulation of cancer stem cells and eradicating or inhibiting the symmetric division of cancer stem cells would become the most important therapeutic strategy. However, clinical evidence for this hypothesis is still scarce. To evaluate the overpopulation hypothesis of cancer stem cells the association of percentage of CD133+ tumor cells with clinicopathological parameters in colon cancer was investigated since CD133 is a putative cancer stem cell marker shared by multiple solid tumors. Patients and methods Tumor tissues matched with adjacent normal tissues were collected from 104 stage IIIB colon cancer patients who were subject to radical resection between January, 1999 to July, 2003 in this center. The CD133 expression was examined with immunohistochemical staining. The correlation of the percentage of CD133+ cell with clinicopathological parameters and patients' 5-year survival was analyzed. Results The CD133+ cells were infrequent and heterogeneous distribution in the cancer tissue. Staining of CD133 was localized not only on the glandular-luminal surface of cancer cells but also on the invasive budding and the poorly differentiated tumors with ductal structures. Both univariate and multivariate survival analysis revealed that the percentage of CD133+ cancer cells and the invasive depth of tumor were independently prognostic. The patients with a lower percentage of CD133+ cancer cells (less than 5% were strongly associated with a higher 5-year survival rate than those with a higher percentage of CD133+ cancer cells (greater than or equal to 55%. Additionally, no correlation was obtained between the percentage of CD133+ cancer cells and the other clinicopathological parameters including gender, age, site of primary mass, pathologic types, grades, and invasive depth. Conclusion The fact that a higher percentage CD133+ cells were strongly associated

Microcogeneration in buildings with low energy demand in load sharing application

International Nuclear Information System (INIS)

Angrisani, Giovanni; Canelli, Michele; Roselli, Carlo; Sasso, Maurizio

2015-01-01

Highlights: • The use of microcogenerator (MCHP) in buildings with low energy demand is evaluated. • The load sharing approach leads to suitable thermal and electric loads for MCHP. • Dynamic simulations are carried out considering two different climates. • A sensitivity analysis with respect to the self-consumed electricity is performed. • MCHPs with internal combustion engine perfectly match with well-insulated buildings. - Abstract: The paper investigates the introduction of a MCHP (Micro Combined Heat and Power) system in buildings with low energy demand with respect to the current building stock. A load sharing approach between a multifamily residential building and an office one is taken into account. Dynamic simulations are carried out in order to evaluate the thermo-economic performance of the analyzed system. Particular attention is given to the estimation of the electric load of the different users, as the economic profitability of a MCHP system is strongly influenced by the amount of self-consumed electricity. In order to analyze the influence of climatic conditions, two different geographical locations in Italy (Naples and Turin, having 1034 and 2617 heating degree days, respectively) are considered. The results of this study indicate that the installation of MCHP systems in buildings with low energy demand allows to increase the percentage of self-consumed electricity reducing the bidirectional electricity flow between the users and the external grid, as well as the impact on the grid itself due to the large diffusion of distributed generation systems. Moreover this study shows that the load sharing approach between users with different load profile leads to better energy, environmental and economic results with respect to a conventional system. The climatic conditions play an important role on the MCHP operational hours and hence on the thermo-economic performance of the system. The primary energy saving of the system located in Turin is

Cyber Situation Awareness through Instance-Based Learning: Modeling the Security Analyst in a Cyber-Attack Scenario

Science.gov (United States)

2012-01-01

Chocolate Avenue Hershey PA 17033 Tel: 717-533-8845 Fax: 717-533-8661 E-mail: cust@igi-global.com Web site: http://www.igi-global.com Copyright © 2011...program and obtain control on the machine (event 21st out of 25). During the course of this simple scenario, a security analyst is able to observe...G. A. (1989). Recognition-primed deci- sions. In Rouse, W. B. (Ed.), Advances in man- machine system research (Vol. 5, pp. 47–92). Greenwich, CT

Effect of loading on unintentional lifting velocity declines during single sets of repetitions to failure during upper and lower extremity muscle actions.

Science.gov (United States)

Izquierdo, M; González-Badillo, J J; Häkkinen, K; Ibáñez, J; Kraemer, W J; Altadill, A; Eslava, J; Gorostiaga, E M

2006-09-01

The purpose of this study was to examine the effect of different loads on repetition speed during single sets of repetitions to failure in bench press and parallel squat. Thirty-six physical active men performed 1-repetition maximum in a bench press (1 RM (BP)) and half squat position (1 RM (HS)), and performed maximal power-output continuous repetition sets randomly every 10 days until failure with a submaximal load (60 %, 65 %, 70 %, and 75 % of 1RM, respectively) during bench press and parallel squat. Average velocity of each repetition was recorded by linking a rotary encoder to the end part of the bar. The values of 1 RM (BP) and 1 RM (HS) were 91 +/- 17 and 200 +/- 20 kg, respectively. The number of repetitions performed for a given percentage of 1RM was significantly higher (p bench press performance. Average repetition velocity decreased at a greater rate in bench press than in parallel squat. The significant reductions observed in the average repetition velocity (expressed as a percentage of the average velocity achieved during the initial repetition) were observed at higher percentage of the total number of repetitions performed in parallel squat (48 - 69 %) than in bench press (34 - 40 %) actions. The major finding in this study was that, for a given muscle action (bench press or parallel squat), the pattern of reduction in the relative average velocity achieved during each repetition and the relative number of repetitions performed was the same for all percentages of 1RM tested. However, relative average velocity decreased at a greater rate in bench press than in parallel squat performance. This would indicate that in bench press the significant reductions observed in the average repetition velocity occurred when the number of repetitions was over one third (34 %) of the total number of repetitions performed, whereas in parallel squat it was nearly one half (48 %). Conceptually, this would indicate that for a given exercise (bench press or squat) and

20 CFR Appendix Vi to Subpart C of... - Percentage of Automatic Increases in Primary Insurance Amounts Since 1978

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Percentage of Automatic Increases in Primary... ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Computing Primary Insurance Amounts Pt. 404, Subpt. C, App. VI Appendix VI to Subpart C of Part 404—Percentage of Automatic Increases in...

A regulatory adjustment process for the determination of the optimal percentage requirement in an electricity market with Tradable Green Certificates

International Nuclear Information System (INIS)

Currier, Kevin M.

2013-01-01

A system of Tradable Green Certificates (TGCs) is a market-based subsidy scheme designed to promote electricity generation from renewable energy sources such as wind power. Under a TGC system, the principal policy instrument is the “percentage requirement,” which stipulates the percentage of total electricity production (“green” plus “black”) that must be obtained from renewable sources. In this paper, we propose a regulatory adjustment process that a regulator can employ to determine the socially optimal percentage requirement, explicitly accounting for environmental damages resulting from black electricity generation. - Highlights: • A Tradable Green Certificate (TGC) system promotes energy production from renewable sources. • We consider an electricity oligopoly operated under a TGC system. • Welfare analysis must account for damages from “black” electricity production. • We characterize the welfare maximizing (optimal) “percentage requirement.” • We present a regulatory adjustment process that computes the optimal percentage requirement iteratively

Real-time POD-CFD Wind-Load Calculator for PV Systems

Energy Technology Data Exchange (ETDEWEB)

Huayamave, Victor [Centecorp; Divo, Eduardo [Centecorp; Ceballos, Andres [Centecorp; Barriento, Carolina [Centecorp; Stephen, Barkaszi [FSEC; Hubert, Seigneur [FSEC

2014-03-21

of reducing the total installed cost of solar energy systems by 75%. The largest percentage of the total installed cost of solar energy system is associated with balance of system cost, with up to 40% going to “soft” costs; which include customer acquisition, financing, contracting, permitting, interconnection, inspection, installation, performance, operations, and maintenance. The calculator that is being developed will provide wind loads in real-time for any solar system designs and suggest the proper installation configuration and hardware; and therefore, it is anticipated to reduce system design, installation and permitting costs.

Body fat percentage is better than indicators of weight status to identify children and adolescents with unfavorable lipid profile.

Science.gov (United States)

Oliosa, Polyana Romano; Zaniqueli, Divanei; Alvim, Rafael de Oliveira; Barbosa, Miriam Carmo Rodrigues; Mill, José Geraldo

2018-01-05

To assess whether the indicators of weight status body mass index and waist-to-height ratio are similar to body fat percentage to identify obese children and adolescents with unfavorable lipid profile. This was a cross-sectional study involving 840 children and adolescents (6-18 years). The same individuals were classified as non-obese (

percentage and indicators of weight status, body mass index, and waist-to-height ratio. Body fat percentage was obtained by multi-frequency bioelectrical impedance. Linear association between obesity and increased lipid fractions was tested by ANCOVA. Normal distribution curves of non-HDL cholesterol were designed for obese and non-obese. To provide the proportion of obese individuals with elevated non-HDL-c across all indicators, Z-score was calculated. Obese boys presented higher non-HDL cholesterol when compared with those non-obese, classified by body mass index (107±28 vs. 94±25mg/dL, p=0.001), waist-to-height ratio (115±29 vs. 94±25mg/dL, p<0.001) and body fat percentage (119±33 vs. 94±24mg/dL, p<0.001). Differently, obese girls presented with higher non-HDL cholesterol when compared with those non-obese only according to the body fat percentage classification (118±24 vs. 96±26mg/dL, p=0.001). A large shift to the right in the distribution curve of non-HDL cholesterol among obese girls compared with non-obese was observed only when body fat percentage was used to discriminate between obese and non-obese. Body fat percentage was better than the indicators of weight status to identify children and adolescents with unfavorable lipid profile, mainly among girls. Copyright © 2017. Published by Elsevier Editora Ltda.

Percentage of Protected Area Amounts within each Watershed Boundary for the Conterminous US

Science.gov (United States)

Abstract: This dataset uses spatial information from the Watershed Boundary Dataset (WBD, March 2011) and the Protected Areas Database of the United States (PAD-US Version 1.0). The resulting data layer, with percentages of protected areas by category, was created using the ATtI...

Effect of increasing nitrobenzene loading rates on the performance of anaerobic migrating blanket reactor and sequential anaerobic migrating blanket reactor/completely stirred tank reactor system

International Nuclear Information System (INIS)

Kuscu, Ozlem Selcuk; Sponza, Delia Teresa

2009-01-01

A laboratory scale anaerobic migrating blanket reactor (AMBR) reactor was operated at nitrobenzene (NB) loading rates increasing from 3.33 to 66.67 g NB/m 3 day and at a constant hydraulic retention time (HRT) of 6 days to observe the effects of increasing NB concentrations on chemical oxygen demand (COD), NB removal efficiencies, bicarbonate alkalinity, volatile fatty acid (VFA) accumulation and methane gas percentage. Moreover, the effect of an aerobic completely stirred tank reactor (CSTR) reactor, following the anaerobic reactor, on treatment efficiencies was also investigated. Approximately 91-94% COD removal efficiencies were observed up to a NB loading rate of 30.00 g/m 3 day in the AMBR reactor. The COD removal efficiencies decreased from 91% to 85% at a NB loading rate of 66.67 g/m 3 day. NB removal efficiencies were approximately 100% at all NB loading rates. The maximum total gas, methane gas productions and methane percentage were found to be 4.1, 2.6 l/day and 59%, respectively, at a NB loading rate of 30.00 g/m 3 day. The optimum pH values were found to be between 7.2 and 8.4 for maximum methanogenesis. The total volatile fatty acid (TVFA) concentrations in the effluent were 110 and 70 mg/l in the first and second compartments at NB loading rates as high as 66.67 and 6.67 g/m 3 day, respectively, while they were measured as zero in the effluent of the AMBR reactor. In this study, from 180 mg/l NB 66 mg/l aniline was produced in the anaerobic reactor while aniline was completely removed and transformed to 2 mg/l of cathechol in the aerobic CSTR reactor. Overall COD removal efficiencies were found to be 95% and 99% for NB loading rates of 3.33 and 66.67 g/m 3 day in the sequential anaerobic AMBR/aerobic CSTR reactor system, respectively. The toxicity tests performed with Photobacterium phosphoreum (LCK 480, LUMIStox) and Daphnia magna showed that the toxicity decreased with anaerobic/aerobic sequential reactor system from the influent, anaerobic and to

Effect of processing on the detectability of peanut protein by ELISA.

Science.gov (United States)

Iqbal, Amjad; Ateeq, Nadia

2013-12-01

Chicken IgY was used for the detection and quantification of peanut proteins by indirect competitive ELISA. The method was optimized by using a checker board approach to determine the optimal concentration of coating antigen, primary antibody and secondary antibody. Peanut protein could be detected in foods down to levels of 10 ppm. The effect of physical (heat treatment at 80 °C and 100 °C) and chemical (acid, alkali and reducing sugar) treatments on the IgY binding of peanut proteins was investigated. The optimized assay was relatively sensitive for the roasted peanut proteins. However, the binding ability of chicken IgYs to peanut proteins was found to be significantly altered by denaturation and hydrolysis of proteins. It was also observed that the effect of Millard chemistry on the detectability of peanut protein was less pronounced at high temperatures than at low temperatures. Copyright © 2013 Elsevier Ltd. All rights reserved.

24 CFR 1000.238 - What percentage of the IHBG funds can be used for administrative and planning expenses?

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false What percentage of the IHBG funds can be used for administrative and planning expenses? 1000.238 Section 1000.238 Housing and Urban... ACTIVITIES Indian Housing Plan (IHP) § 1000.238 What percentage of the IHBG funds can be used for...

The application of the percentage change calculation in the context of inflation in Mathematical Literacy

Directory of Open Access Journals (Sweden)

Sarah Bansilal

2017-07-01

Full Text Available The school subject Mathematical Literacy requires application of mathematics procedures in various contextual settings, but not much is known about the ways in which students engage with contextual settings such as inflation. This qualitative study was conducted with in-service Mathematical Literacy teachers in South Africa with the purpose of exploring the extent to which the teachers recognised the contextual constraints involved in applying the percentage change calculation to the inflation context. The written responses of the 406 Mathematical Literacy teachers were scrutinised to identify their interpretations of the contextual constraints involved in applying the percentage change procedure to the context of inflation. The item required the application of two successive percentage change operations (corresponding to the inflation rates for the 2 years. Of the 406 responses that were analysed, 260 (65% were unable to take account of all the contextual constraints. There were 108 teachers who reduced the procedure to a one-step calculation while 64 teachers interpreted the context as a percentage decrease scenario. A large number of teachers (162 struggled with the interpretation of the role of the year, k, in the relationship between the quantities. The findings indicate that engagement with and understanding of the concept of inflation is dependent on a synthesis of the contextual constraints into the mathematical procedures. This article provides some insights into the struggles with making sense of the contextual nature of inflation which is an area that has received little attention in mathematics education studies. The teachers’ struggles likely mirror learners’ struggles and hence the research applies in a similar way to learners.

A Multi-Agent Approach for the Extract-Transform-Load Process Support in Data Warehouses

Directory of Open Access Journals (Sweden)

Daniel Betancur-Calderón

2012-06-01

Full Text Available In order to provide an adequate solution in terms of robustness and automation in the process of Extract-Transform-Load (ETL in data warehouses, in this article a multi-agent model that gathers the strengths of other approaches like wrappers and ad-hoc solutions is presented. Such a model considers the heterogeneity and availability of the data sources as well as their distributed nature. For its validation an experiment was performed using simulated and real data, which demonstrated not only its technical feasibility but also its effectiveness in terms of the percentage of processed data and the time to accomplish it.

Optimization of 10 kW solar photovoltaic – diesel generator hybrid energy system for different load factors at Jaisalmer location of Rajasthan, India

Science.gov (United States)

Saraswat, S. K.; Rao, K. V. S.

2018-03-01

Jaisalmer town in Rajasthan, India is having annual average solar insolation of 5.80 kWh/m2/day and 270 – 300 clear sky days in a year. A 10 kW off-grid hybrid energy system (HES) consisting of solar photovoltaic panels – diesel generator – bidirectional converter and batteries with zero percentage loss of load for Jaisalmer is designed using HOMER (version 3.4.3) software. Different system load factors of 0.33, 0.50, 0.67, 0.83 and 1 corresponding to fraction of running hours per day of the system are considered. The system is analyzed for all three aspects, namely, electrical, economic and emission point of view. Least levelized cost of electricity (LCOE) of Rs. 8.43/kWh is obtained at a load factor value of 0.5. If diesel generator alone (without Solar PV) is used to fulfil the demand for a load factor of 0.5the value of LCOE is obtained Rs.19.23/kWh. Comparison of results obtained for HES and diesel generator are made for load factor of 0.5 and 1.

Centers for Disease Control and Prevention Funding for HIV Testing Associated With Higher State Percentage of Persons Tested.

Science.gov (United States)

Hayek, Samah; Dietz, Patricia M; Van Handel, Michelle; Zhang, Jun; Shrestha, Ram K; Huang, Ya-Lin A; Wan, Choi; Mermin, Jonathan

2015-01-01

To assess the association between state per capita allocations of Centers for Disease Control and Prevention (CDC) funding for HIV testing and the percentage of persons tested for HIV. We examined data from 2 sources: 2011 Behavioral Risk Factor Surveillance System and 2010-2011 State HIV Budget Allocations Reports. Behavioral Risk Factor Surveillance System data were used to estimate the percentage of persons aged 18 to 64 years who had reported testing for HIV in the last 2 years in the United States by state. State HIV Budget Allocations Reports were used to calculate the state mean annual per capita allocations for CDC-funded HIV testing reported by state and local health departments in the United States. The association between the state fixed-effect per capita allocations for CDC-funded HIV testing and self-reported HIV testing in the last 2 years among persons aged 18 to 64 years was assessed with a hierarchical logistic regression model adjusting for individual-level characteristics. The percentage of persons tested for HIV in the last 2 years. In 2011, 18.7% (95% confidence interval = 18.4-19.0) of persons reported being tested for HIV in last 2 years (state range, 9.7%-28.2%). During 2010-2011, the state mean annual per capita allocation for CDC-funded HIV testing was $0.34 (state range, $0.04-$1.04). A $0.30 increase in per capita allocation for CDC-funded HIV testing was associated with an increase of 2.4 percentage points (14.0% vs 16.4%) in the percentage of persons tested for HIV per state. Providing HIV testing resources to health departments was associated with an increased percentage of state residents tested for HIV.

Preparation and In Vitro/Ex Vivo Evaluation of Moxifloxacin-Loaded PLGA Nanosuspensions for Ophthalmic Application.

Science.gov (United States)

Mudgil, Meetali; Pawar, Pravin K

2013-01-01

The aim of the present investigation was to prepare a colloidal ophthalmic formulation to improve the residence time of moxifloxacin. Moxifloxacin-loaded poly(dl-lactide-co-glycolide) (PLGA) nanosuspensions were prepared by using the solvent evaporation technique. The nanosuspensions were characterised physically by using different techniques like particle size, zeta potential, FTIR, DSC, and XRD analysis. In vitro and ex vivo studies of nanosuspensions were carried out using a modified USP dissolution apparatus and all-glass Franz diffusion cells, respectively. The antibacterial activities of the nanosuspension and marketed formulations were performed against S. aureus and P. aeroginosa. The moxifloxacin-loaded PLGA nanosuspensions showed uniform particle size, ranging between 164-490 nm with negative zeta potential for all batches. The percentage entrapment efficiency of the drug-loaded nano-suspension was found to be between 84.09 to 92.05%. In vitro drug release studies suggest that all of the formulations showed extended drug release profiles and follow Korsemeyer-Peppas release kinetics. In vitro corneal permeability was found to be comparable with that of the marketed formulation across isolated goat cornea, indicating the suitability of the nanosuspension formulation in the ophthalmic delivery of moxifloxacin. The optimised nano-suspension was found to be more active against S. aureus and P. aeruginosa compared to the marketed eye drops.

Load forecasting

International Nuclear Information System (INIS)

Mak, H.

1995-01-01

Slides used in a presentation at The Power of Change Conference in Vancouver, BC in April 1995 about the changing needs for load forecasting were presented. Technological innovations and population increase were said to be the prime driving forces behind the changing needs in load forecasting. Structural changes, market place changes, electricity supply planning changes, and changes in planning objectives were other factors discussed. It was concluded that load forecasting was a form of information gathering, that provided important market intelligence

Wind Loads on Structures

DEFF Research Database (Denmark)

Dyrbye, Claes; Hansen, Svend Ole

Wind loads have to be taken into account when designing civil engineering structures. The wind load on structures can be systematised by means of the wind load chain: wind climate (global), terrain (wind at low height), aerodynamic response (wind load to pressure), mechanical response (wind...... pressure to structural response) and design criteria. Starting with an introduction of the wind load chain, the book moves on to meteorological considerations, atmospheric boundary layer, static wind load, dynamic wind load and scaling laws used in wind-tunnel tests. The dynamic wind load covers vibrations...... induced by wind turbulence, vortex shedding, flutter and galloping. The book gives a comprehensive treatment of wind effects on structures and it will be useful for consulting engineers designing wind-sensitive structures. It will also be valuable for students of civil engineering as textbook...

Limit load assessment of centre cracked plates under biaxial loading

International Nuclear Information System (INIS)

Meek, C.; Ainsworth, R.A.

2015-01-01

Fitness-for-service of equipment and components containing defects is generally assessed using procedures such as BS 7910, API 579 and R6. There is currently little detailed advice in these procedures on the effects of biaxial and triaxial loading on fracture. This poster shows some theoretical bounding solutions of the plastic limit load for centre cracked plates under a variety of biaxial loading ratios and compares the estimates with those found by numerical methods using finite element (FE) analysis using Abacus CAE modelling software. The limit load of a structure is the maximum load that it can carry before plastic collapse occurs; this is often when the plastic zone has become large enough to spread from the crack tip to a remote boundary. For an elastic-perfectly plastic material, the irreversible deformation will continue at stresses no higher than the yield stress. The model for these limit load solutions is a bi-axially loaded plate of width 2W and height 2H, a centre crack of width 2a, acted on by remotely applied uniform stresses σ 2 perpendicular to the crack and Bσ 2 parallel to the crack, where B is the biaxial loading ratio, it means the ratio of the parallel to the perpendicular stress. A quarter plate of an elastic-perfectly plastic material has been modelled. The results show that an exact solution has been found for negative and low positive values of B. For B > 1, the lower bound solution is conservative for all values of a/W and B

Torque and Axial Loading Physics for Measuring Atmospheric Icing Load and Icing Rate

OpenAIRE

Mughal, Umair Najeeb; Virk, Muhammad Shakeel

2015-01-01

Measuring icing load and icing rate are important parameters for an atmospheric icing sensor. A new icing sensor has recently been designed and developed at Narvik University College for measuring atmospheric icing rate, icing load and icing type. Unlike the existing atmospheric icing sensors commercially available in market, which uses the axial loading for measuring icing load and icing rate, this new sensory system measures icing load and icing rate using the torque loading physics. The pe...

Low-back loading in lifting two loads beside the body compared to lifting one load in front of the body

NARCIS (Netherlands)

Faber, G.S.; Kingma, I.; Bakker, A.J.; van Dieen, J.H.

2009-01-01

Low-back load during manual lifting is considered an important risk factor for the occurrence of low-back pain. Splitting a load, so it can be lifted beside the body (one load in each hand), instead of in front of the body, can be expected to reduce low-back load. Twelve healthy young men lifted 10

Geographically Weighted Regression Model with Kernel Bisquare and Tricube Weighted Function on Poverty Percentage Data in Central Java Province

Science.gov (United States)

Nugroho, N. F. T. A.; Slamet, I.

2018-05-01

Poverty is a socio-economic condition of a person or group of people who can not fulfil their basic need to maintain and develop a dignified life. This problem still cannot be solved completely in Central Java Province. Currently, the percentage of poverty in Central Java is 13.32% which is higher than the national poverty rate which is 11.13%. In this research, data of percentage of poor people in Central Java Province has been analyzed through geographically weighted regression (GWR). The aim of this research is therefore to model poverty percentage data in Central Java Province using GWR with weighted function of kernel bisquare, and tricube. As the results, we obtained GWR model with bisquare and tricube kernel weighted function on poverty percentage data in Central Java province. From the GWR model, there are three categories of region which are influenced by different of significance factors.

Probabilistic Load Models for Simulating the Impact of Load Management

DEFF Research Database (Denmark)

Chen, Peiyuan; Bak-Jensen, Birgitte; Chen, Zhe

2009-01-01

. It is concluded that the AR(12) model is favored with limited measurement data and that the joint-normal model may provide better results with a large data set. Both models can be applied in general to model load time series and used in time-sequential simulation of distribution system planning.......This paper analyzes a distribution system load time series through autocorrelation coefficient, power spectral density, probabilistic distribution and quantile value. Two probabilistic load models, i.e. the joint-normal model and the autoregressive model of order 12 (AR(12)), are proposed...... to simulate the impact of load management. The joint-normal model is superior in modeling the tail region of the hourly load distribution and implementing the change of hourly standard deviation. Whereas the AR(12) model requires much less parameter and is superior in modeling the autocorrelation...

Concurrent Working Memory Load Can Facilitate Selective Attention: Evidence for Specialized Load

Science.gov (United States)

Park, Soojin; Kim, Min-Shik; Chun, Marvin M.

2007-01-01

Load theory predicts that concurrent working memory load impairs selective attention and increases distractor interference (N. Lavie, A. Hirst, J. W. de Fockert, & E. Viding, see record 2004-17825-003). Here, the authors present new evidence that the type of concurrent working memory load determines whether load impairs selective attention or not.…

From the Editor

OpenAIRE

Ugur DEMIRAY

2011-01-01

Dear readers of TOJDE,TOJDE appears on your screen now as Volume 12, Number: 3/2. This issue covers as a Special Issue on “Usage of Second Life Applications in Generally Education and Especially in Distance Education” field. Almost 9 months ago, I was planning to publish a book by agreement with IGI publishing, USA, on “Usage of Second Life Applications in Generally Education and Especially in Distance Education” field. And also recently, I had signed a draft contract with IGI Publishing too....

Using bench press load to predict upper body exercise loads in physically active individuals.

Science.gov (United States)

Wong, Del P; Ngo, Kwan-Lung; Tse, Michael A; Smith, Andrew W

2013-01-01

This study investigated whether loads for assistance exercises of the upper body can be predicted from the loads of the bench press exercise. Twenty-nine physically active collegiate students (age: 22.6 ± 2.5; weight training experience: 2.9 ± 2.1 years; estimated 1RM bench press: 54.31 ± 14.60 kg; 1RM: body weight ratio: 0.80 ± 0.22; BMI: 22.7 ± 2.1 kg·m(-2)) were recruited. The 6RM loads for bench press, barbell bicep curl, overhead dumbbell triceps extension, hammer curl and dumbbell shoulder press were measured. Test-retest reliability for the 5 exercises as determined by Pearson product moment correlation coefficient was very high to nearly perfect (0.82-0.98, p bench press load was significantly correlated with the loads of the 4 assistance exercises (r ranged from 0.80 to 0.93, p bench press load was a significant (R(2) range from 0.64 to 0.86, p Bench press load (0.28) + 6.30 kg, (b) Barbell biceps curl = Bench press load (0.33) + 6.20 kg, (c) Overhead triceps extension = Bench press load (0.33) - 0.60 kg, and (d) Dumbbell shoulder press = Bench press load (0.42) + 5.84 kg. The difference between the actual load and the predicted load using the four equations ranged between 6.52% and 8.54%, such difference was not significant. Fitness professionals can use the 6RM bench press load as a time effective and accurate method to predict training loads for upper body assistance exercises. Key pointsThe bench press load was significantly correlated with the loads of the 4 assistance exercises.No significant differences were found between the actual load and the predicted load in the four equations.6RM bench press load can be a time effective and accurate method to predict training loads for upper body assistance exercises.

Reciprocating Wear Behaviour of 7075Al/SiC and 6061Al/Al2O3 Composites: A study of Effect of Reinforcement, Stroke and Load

Directory of Open Access Journals (Sweden)

J. Lakshmipathy

2014-06-01

Full Text Available The wear behaviour comparison of Al/SiC and Al/Al2O3 composites prepared by stir casting technique is investigated to find out the effects of weight percentage of SiC/Al2O3, load and the number of strokes on a reciprocating wear testing machine. The MMC pins are prepared with different weight percentage of SiC and Al2O3 (10, 15 and 20 %. The tests are carried out with different load conditions (25, 50 and 75 N and different number of strokes (420,780 and 1605 strokes. Wear surfaces of tested samples are examined in Scanning Electron Microscope (SEM. Hardness test and impact test are also carried out on the MMC samples. The experimental results shows that hardness of composites increases with increase in SiC and Al2O3 particle and the impact strength decreases with increase in SiC and Al2O3 content. The volume loss of MMC specimens are less than that of the matrix alloy. The temperature rise near the contact surface of the MMC specimens increases with increase in wt% of SiC and Al2O3, load and number of strokes. The coefficient of friction decreases with increase in the number of strokes. The WVAS (Wireless Vibration Acquisition System interfaced with MAT Lab software is used to record the amplitudes during the test.

The duration perception of loading applications in smartphone: Effects of different loading types.

Science.gov (United States)

Zhao, Wenguo; Ge, Yan; Qu, Weina; Zhang, Kan; Sun, Xianghong

2017-11-01

The loading time of a smartphone application is an important issue, which affects the satisfaction of phone users. This study evaluated the effects of black loading screen (BLS) and animation loading screen (ALS) during application loading on users' duration perception and satisfaction. A total of 43 volunteers were enrolled. They were asked to complete several tasks by clicking the icons of each application, such as camera or message. The duration of loading time for each application was manipulated. The participants were asked to estimate the duration, evaluate the loading speed and their satisfaction. The results showed that the estimated duration increased and the satisfaction for loading period declined along with the loading time increased. Compared with the BLS, the ALS prolonged the estimated duration, and lowered the evaluation of speed and satisfaction. We also discussed the tendency and key inflection points of the curves involving the estimated duration, speed evaluation and satisfaction with the loading time. Copyright © 2017 Elsevier Ltd. All rights reserved.

Efficacies of gentamicin-loaded magnetite block ionomer complexes against chronic Brucella melitensis infection

International Nuclear Information System (INIS)

Jain-Gupta, Neeta; Pothayee, Nipon; Pothayee, Nikorn; Tyler, Ronald; Caudell, David L.; Balasubramaniam, Sharavanan; Hu, Nan; Davis, Richey M.; Riffle, Judy S.; Sriranganathan, Nammalwar

2013-01-01

Anionic copolymers can enable intracellular delivery of cationic drugs which otherwise cannot cross cell membrane barriers. We tested the efficacy of gentamicin-loaded magnetite block ionomer complexes (MBICs) against intracellular Brucella melitensis. Anionic block copolymers were used to coat nanomagnetite through adsorption of a portion of anions on the particle surfaces, then the remaining anions were complexed with 30–32 weight percentage of gentamicin. The zeta potential changed from −39 to −13 mV after encapsulation of the drug with complementary charge. The gentamicin-loaded MBICs had intensity average hydrodynamic diameters of 62 nm, while the polymer-coated nanomagnetite particles without drug were 34 nm in size. No toxicity as measured by a MTS assay was observed upon incubation of the MBICs with J774A.1 murine macrophage-like cells. Confocal microscopic images showed that the MBICs were taken up by the macrophages and distributed in the cell cytoplasm and endosomal/lysosomal compartments. Upon treatment with gentamicin-loaded MBICs (3.5 Log 10 ), B. melitensis-infected macrophages showed significantly higher clearance of Brucella compared to the treatment with free g (0.9 Log 10 ). Compared to doxycycline alone, a combination of doxycycline and gentamicin (either free or encapsulated in MBICs) showed significantly higher clearance of B.melitensis from chronically infected mice. Histopathological examination of kidneys from the MBICs-treated mice revealed multifocal infiltration of macrophages containing intracytoplasmic iron (MBICs) in peri-renal adipose. Although MBICs showed similar efficacy as free gentamicin against Brucella in mice, our strategy presents an effective way to deliver higher loads of drugs intracellularly and ability to study the bio-distribution of drug carriers

Efficacies of gentamicin-loaded magnetite block ionomer complexes against chronic Brucella melitensis infection

Energy Technology Data Exchange (ETDEWEB)

Jain-Gupta, Neeta [Virginia-Maryland Regional College of Veterinary Medicine, Virginia Polytechnic Institute and State University, Department of Biomedical Sciences and Pathobiology (United States); Pothayee, Nipon; Pothayee, Nikorn [Virginia Polytechnic Institute and State University, Macromolecules and Interfaces Institute (United States); Tyler, Ronald; Caudell, David L. [Virginia-Maryland Regional College of Veterinary Medicine, Virginia Polytechnic Institute and State University, Department of Biomedical Sciences and Pathobiology (United States); Balasubramaniam, Sharavanan; Hu, Nan; Davis, Richey M.; Riffle, Judy S. [Virginia Polytechnic Institute and State University, Macromolecules and Interfaces Institute (United States); Sriranganathan, Nammalwar, E-mail: nathans@vt.edu [Virginia-Maryland Regional College of Veterinary Medicine, Virginia Polytechnic Institute and State University, Department of Biomedical Sciences and Pathobiology (United States)

2013-11-15

Anionic copolymers can enable intracellular delivery of cationic drugs which otherwise cannot cross cell membrane barriers. We tested the efficacy of gentamicin-loaded magnetite block ionomer complexes (MBICs) against intracellular Brucella melitensis. Anionic block copolymers were used to coat nanomagnetite through adsorption of a portion of anions on the particle surfaces, then the remaining anions were complexed with 30–32 weight percentage of gentamicin. The zeta potential changed from −39 to −13 mV after encapsulation of the drug with complementary charge. The gentamicin-loaded MBICs had intensity average hydrodynamic diameters of 62 nm, while the polymer-coated nanomagnetite particles without drug were 34 nm in size. No toxicity as measured by a MTS assay was observed upon incubation of the MBICs with J774A.1 murine macrophage-like cells. Confocal microscopic images showed that the MBICs were taken up by the macrophages and distributed in the cell cytoplasm and endosomal/lysosomal compartments. Upon treatment with gentamicin-loaded MBICs (3.5 Log{sub 10}), B. melitensis-infected macrophages showed significantly higher clearance of Brucella compared to the treatment with free g (0.9 Log{sub 10}). Compared to doxycycline alone, a combination of doxycycline and gentamicin (either free or encapsulated in MBICs) showed significantly higher clearance of B.melitensis from chronically infected mice. Histopathological examination of kidneys from the MBICs-treated mice revealed multifocal infiltration of macrophages containing intracytoplasmic iron (MBICs) in peri-renal adipose. Although MBICs showed similar efficacy as free gentamicin against Brucella in mice, our strategy presents an effective way to deliver higher loads of drugs intracellularly and ability to study the bio-distribution of drug carriers.

Efficacies of gentamicin-loaded magnetite block ionomer complexes against chronic Brucella melitensis infection

Science.gov (United States)

Jain-Gupta, Neeta; Pothayee, Nipon; Pothayee, Nikorn; Tyler, Ronald; Caudell, David L.; Balasubramaniam, Sharavanan; Hu, Nan; Davis, Richey M.; Riffle, Judy S.; Sriranganathan, Nammalwar

2013-11-01

Anionic copolymers can enable intracellular delivery of cationic drugs which otherwise cannot cross cell membrane barriers. We tested the efficacy of gentamicin-loaded magnetite block ionomer complexes (MBICs) against intracellular Brucella melitensis. Anionic block copolymers were used to coat nanomagnetite through adsorption of a portion of anions on the particle surfaces, then the remaining anions were complexed with 30-32 weight percentage of gentamicin. The zeta potential changed from -39 to -13 mV after encapsulation of the drug with complementary charge. The gentamicin-loaded MBICs had intensity average hydrodynamic diameters of 62 nm, while the polymer-coated nanomagnetite particles without drug were 34 nm in size. No toxicity as measured by a MTS assay was observed upon incubation of the MBICs with J774A.1 murine macrophage-like cells. Confocal microscopic images showed that the MBICs were taken up by the macrophages and distributed in the cell cytoplasm and endosomal/lysosomal compartments. Upon treatment with gentamicin-loaded MBICs (3.5 Log10), B. melitensis-infected macrophages showed significantly higher clearance of Brucella compared to the treatment with free g (0.9 Log10). Compared to doxycycline alone, a combination of doxycycline and gentamicin (either free or encapsulated in MBICs) showed significantly higher clearance of B. melitensis from chronically infected mice. Histopathological examination of kidneys from the MBICs-treated mice revealed multifocal infiltration of macrophages containing intracytoplasmic iron (MBICs) in peri-renal adipose. Although MBICs showed similar efficacy as free gentamicin against Brucella in mice, our strategy presents an effective way to deliver higher loads of drugs intracellularly and ability to study the bio-distribution of drug carriers.

Electrical load modeling

Energy Technology Data Exchange (ETDEWEB)

Valgas, Helio Moreira; Pinto, Roberto del Giudice R.; Franca, Carlos [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, MG (Brazil); Lambert-Torres, Germano; Silva, Alexandre P. Alves da; Pires, Robson Celso; Costa, Junior, Roberto Affonso [Escola Federal de Engenharia de Itajuba, MG (Brazil)

1994-12-31

Accurate dynamic load models allow more precise calculations of power system controls and stability limits, which are critical mainly in the operation planning of power systems. This paper describes the development of a computer program (software) for static and dynamic load model studies using the measurement approach for the CEMIG system. Two dynamic load model structures are developed and tested. A procedure for applying a set of measured data from an on-line transient recording system to develop load models is described. (author) 6 refs., 17 figs.

Profile of Cardiorespiratory Fitness, Flexibility and Fat Percentage of Junior High School Students in Jatinangor

Directory of Open Access Journals (Sweden)

Gemuruh Putra Akbar

2017-06-01

Full Text Available Background: Obesity and physical inactivity is a major risk factor for non-communicable disease and global mortality in adolescent. Lack of physical activity will lead the condition into poor physical fitness, measured by cardio respiratory fitness (maximum oxygen volume, VO2 max, and other components such as flexibility. The study aimed to describe VO2 max, flexibility and fat percentage among junior high school students in Jatinangor. Methods: The study was a descriptive observational study using descriptive analysis.  VO2 max was assessed using Astrand Ryhming step test, flexibility was measured using flexometer sit and reach test, and fat percentage was determined using bioelectrical impedance analysis scale. The subjects were junior high school students who were study in 1st, 2nd and 3rd grade in Jatinangor Junior High School based on stratification sampling method. It was conducted from September–October 2013. Results: Total subjects were 110 students consisted of male (n=52 and female (n=58.  The VO2 max were in good and above category, 57.69% of male (50.37 ± 9.80 ml/kg/min, and 60.34% of female (37.66±7.03 ml/kg/min. The flexibility for both males and females were within excellent category (67.31%, 26.56 ±7.14 cm and 67.24%, 27.29±6.64 cm respectively. The fat percentage in females were within healthy category (67.24%, 25.28 ± 6.85 %, meanwhile male were within underfat category (48.08%, 11.66 ± 5.83 %. Conclusions: The majority of VO2 max, and flexibility both in male and female were good. The fat percentages were good in female students, while in male students were under normal range. DOI: 10.15850/amj.v4n2.1085

Metabolic syndrome: Differences for Asian Americans is in their percentage of body fat

Directory of Open Access Journals (Sweden)

Patricia Alpert

2016-09-01

Full Text Available Asian Americans are not frequently thought of as being obese or overweight yet some of the Asian American subgroups have a disproportionate risk for cardiovascular disease and type 2 diabetes mellitus. Although the standardized body mass index (BMI assessment is an adequate tool for reporting secular prevalence trends for overweight/obesity across populations, it falls short in accuracy when assessing Asian Americans. In recent years more has been written about the re-evaluation of BMI cut points for normal weight, overweight, or obese Asian Americans. Additionally, the waist circumference norm was modified to indicate a smaller waist size is a risk for metabolic syndrome. The purpose of this paper is to provide an overview of the research literature on BMI and percentage of body fat as it relates to health risk for metabolic syndrome for Asian American subgroups. Three databases were used to identify articles for this review: Google Scholar, CINHAL, and PubMed. Seven hundred twenty-six articles were initially identified as meeting the criteria; 690 articles were eliminated after a review of the article titles revealed the content did not meet the focus of this review. Of the remaining articles, 19 were eliminated after a review of the abstracts indicated they were meta-analyses, review articles, or case studies. The remaining 18 articles were included in this review. Three common themes emerged. (1 The differences in BMI and body fat percentage are evident between Asian Americans and other ethnic groups. (2 Differences in the percentage of body fat exist between Asian American subgroups, and between Asian Americans and Asian immigrants. (3 There are differences in disease development end points when comparing Asian American subgroups and Asian immigrant subgroups. There are differences in body fat distribution and body fat percentages as well as BMI compared to other ethnic groups for metabolic syndrome. There are also differences between Asian

Effect of percentage of low plastic fines on the unsaturated shear strength of compacted gravel soil

Directory of Open Access Journals (Sweden)

Kamal Mohamed Hafez Ismail Ibrahim

2015-06-01

Full Text Available Low plastic fines in gravel soils affect its unsaturated shear strength due to the contribution of matric suction that arises in micro and macro pores found within and between aggregates. The shear strength of five different types of prepared gravel soils is measured and is compared with a theoretical model (Fredlund et al., 1978 to predict the unsaturated shear strength. The results are consistent to a great extent except the case of dry clayey gravel soil. It is also found that on inundation of gravel soils containing plastic fines greater than 12% a considerable reduction in both the strength and the stiffness modulus is noticed. This 12% percentage is close to the accepted 15% percentage of fines given by ASTM D4318 (American society for testing material. The angle of internal friction that arises due to matric suction decreases with the increase of degree of saturation of soil. The hysteresis of some tested gravel soils is measured and found that it increases by increasing the percentage of fines.

Dietary lecithin improves dressing percentage and decreases chewiness in the longissimus muscle in finisher gilts.

Science.gov (United States)

Akit, H; Collins, C L; Fahri, F T; Hung, A T; D'Souza, D N; Leury, B J; Dunshea, F R

2014-03-01

The influence of dietary lecithin at doses of 0, 4, 20 or 80 g/kg fed to finisher gilts for six weeks prior to slaughter on growth performance, carcass quality and pork quality was investigated. M. longissimus lumborum (loin) was removed from 36 pig carcasses at 24h post-mortem for Warner-Bratzler shear force, compression, collagen content and colour analyses. Dietary lecithin increased dressing percentage (P=0.009). Pork chewiness and collagen content were decreased by dietary lecithin (Plecithin had no effect on shear force, cohesiveness or hardness (P>0.05, respectively). Dietary lecithin reduced loin muscle L* values and increased a* values (Plecithin improved dressing percentage and resulted in less chewy and less pale pork. © 2013.

Leveraging the International Polar Year Legacy: Providing Historical Perspective for IPY Education, Outreach and Communication Efforts

Science.gov (United States)

Tsukernik, M.; McCaffrey, M. S.

2006-12-01

As the International Polar Year 2007-2008 (IPY) is fast approaching, it is important to look back and learn from the previous experience. Over 125 years ago, when an Austrian explorer and naval officer Lt. Karl Weyprecht called for an international yearlong intensive effort to study the Polar Regions, he probably never imagined that his model for international collaboration would become so widely popular. Frustrated by the lack of coordinated, international collaboration in research activities, Weyprecht proposed an intensive burst of research activity over the course of at least a year. The first IPY began in 1882 with 12 nations establishing 13 stations in the Arctic and 2 in the Southern Hemisphere. The initial yearlong plan did not go beyond data collection. However, the idea lived in the minds of scientists worldwide and the second IPY followed the first one 50 years later. By 1932, technology evolved significantly, and on top of ground-based meteorological and geophysical measurements, data collection also included radiosonde and acoustic atmospheric measurements. Occurring during a global economic depression, and between world wars, the second IPY faced many challenges. However, 40 permanent stations were established, some of which are still active. Scientific exploration also reached remote frontiers from Antarctica to the Earth's ionosphere. Less than a decade after the WWII, the idea of the next IPY started to circulate in scientific circles. The world was focused on space exploration and the word "polar" seemed too narrow for the gigantic projects planned for the 1957. That is why the initial idea of the third IPY evolved into the International Geophysical Year (IGY), although polar regions were still a major focus. The success of the IGY is almost overwhelming the first Earth orbiting satellites, a traverse of Antarctica, a discovery of the Radiation Belt, a series of science education films about IGY activities and research themes are just a few

Spatial electric load forecasting

CERN Document Server

Willis, H Lee

2002-01-01

Spatial Electric Load Forecasting Consumer Demand for Power and ReliabilityCoincidence and Load BehaviorLoad Curve and End-Use ModelingWeather and Electric LoadWeather Design Criteria and Forecast NormalizationSpatial Load Growth BehaviorSpatial Forecast Accuracy and Error MeasuresTrending MethodsSimulation Method: Basic ConceptsA Detailed Look at the Simulation MethodBasics of Computerized SimulationAnalytical Building Blocks for Spatial SimulationAdvanced Elements of Computerized SimulationHybrid Trending-Simulation MethodsAdvanced

Generation of Anti-Boa Immunoglobulin Antibodies for Serodiagnostic Applications, and Their Use to Detect Anti-Reptarenavirus Antibodies in Boa Constrictor.

Directory of Open Access Journals (Sweden)

Yegor Korzyukov

Full Text Available Immunoglobulins (Igs, the key effectors of the adaptive immune system, mediate the specific recognition of foreign structures, i.e. antigens. In mammals, IgM production commonly precedes the production of IgG in the response to an infection. The reptilian counterpart of IgG is IgY, but the exact kinetics of the reptilian immune response are less well known. Boid inclusion body disease (BIBD, an often fatal disease of captive boas and pythons has been linked to reptarenavirus infection, and BIBD is believed to be immunosuppressive. However, so far, the study of the serological response towards reptarenaviruses in BIBD has been hampered by the lack of reagents. Thus we set up a purification protocol for boa constrictor IgY and IgM, which should also be applicable for other snake species. We used centrifugal filter units, poly ethylene glycol precipitation and gel permeation chromatography to purify and separate the IgM and IgY fractions from boa constrictor serum, which we further used to immunise rabbits. We affinity purified IgM and IgY specific reagents from the produced antiserum, and labelled the reagents with horseradish peroxidase. Finally, using the sera of snakes with known exposure to reptarenaviruses we demonstrated that the newly generated reagents can be utilised for serodiagnostic purposes, such as immunoblotting and immunofluorescent staining. To our knowledge, this is the first report to show reptarenavirus-specific antibodies in boa constrictors.

Metals transport in the Sacramento River, California, 1996-1997; Volume 2: Interpretation of metal loads

Science.gov (United States)

Alpers, Charles N.; Antweiler, Ronald C.; Taylor, Howard E.; Dileanis, Peter D.; Domagalski, Joseph L.

2000-01-01

Metals transport in the Sacramento River, northern California, from July 1996 to June 1997 was evaluated in terms of metal loads from samples of water and suspended colloids that were collected on up to six occasions at 13 sites in the Sacramento River Basin. Four of the sampling periods (July, September, and November 1996; and May-June 1997) took place during relatively low-flow conditions and two sampling periods (December 1996 and January 1997) took place during high-flow and flooding conditions, respectively. This study focused primarily on loads of cadmium, copper, lead, and zinc, with secondary emphasis on loads of aluminum, iron, and mercury.Trace metals in acid mine drainage from abandoned and inactive base-metal mines, in the East and West Shasta mining districts, enter the Sacramento River system in predominantly dissolved form into both Shasta Lake and Keswick Reservoir. The proportion of trace metals that was dissolved (as opposed to colloidal) in samples collected at Shasta and Keswick dams decreased in the order zinc ≈ cadmium > copper > lead. At four sampling sites on the Sacramento River--71, 256, 360, and 412 kilometers downstream of Keswick Dam--trace-metal loads were predominantly colloidal during both high- and low-flow conditions. The proportion of total cadmium, copper, lead, and zinc loads transported to San Francisco Bay and the Sacramento-San Joaquin Delta estuary (referred to as the Bay-Delta) that is associated with mineralized areas was estimated by dividing loads at Keswick Dam by loads 412 kilometers downstream at Freeport and the Yolo Bypass. During moderately high flows in December 1996, mineralization-related total (dissolved + colloidal) trace-metal loads to the Bay-Delta (as a percentage of total loads measured downstream) were cadmium, 87 percent; copper, 35 percent; lead, 10 percent; and zinc, 51 percent. During flood conditions in January 1997 loads were cadmium, 22 percent; copper, 11 percent; lead, 2 percent; and zinc, 15

26 CFR 1.613-7 - Application of percentage depletion rates provided in section 613(b) to certain taxable years...

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 7 2010-04-01 2010-04-01 true Application of percentage depletion rates... TAXES (CONTINUED) Natural Resources § 1.613-7 Application of percentage depletion rates provided in... depletion rate specified in section 613 in respect of any mineral property (within the meaning of the 1939...

Shot loading platform analysis

International Nuclear Information System (INIS)

Norman, B.F.

1994-01-01

This document provides the wind/seismic analysis and evaluation for the shot loading platform. Hand calculations were used for the analysis. AISC and UBC load factors were used in this evaluation. The results show that the actual loads are under the allowable loads and all requirements are met

Volatile fatty acids production from food waste: effects of pH, temperature, and organic loading rate.

Science.gov (United States)

Jiang, Jianguo; Zhang, Yujing; Li, Kaimin; Wang, Quan; Gong, Changxiu; Li, Menglu

2013-09-01

The effects of pH, temperature, and organic loading rate (OLR) on the acidogenesis of food waste have been determined. The present study investigated their effects on soluble chemical oxygen demand (SCOD), volatile fatty acids (VFAs), volatile solids (VS), and ammonia nitrogen (NH4(+)-N). Both the concentration and yield of VFAs were highest at pH 6.0, acetate and butyrate accounted for 77% of total VFAs. VFAs concentration and the VFA/SCOD ratio were highest, and VS levels were lowest, at 45 °C, but the differences compared to the values at 35 °C were slight. The concentrations of VFAs, SCOD, and NH4(+)-N increased as OLR increased, whereas the yield of VFAs decreased from 0.504 at 5 g/Ld to 0.306 at 16 g/Ld. Acetate and butyrate accounted for 60% of total VFAs. The percentage of acetate and valerate increased as OLR increased, whereas a high OLR produced a lower percentage of propionate and butyrate. Copyright © 2013 Elsevier Ltd. All rights reserved.

Optimisation of load control

International Nuclear Information System (INIS)

Koponen, P.

1998-01-01

Electricity cannot be stored in large quantities. That is why the electricity supply and consumption are always almost equal in large power supply systems. If this balance were disturbed beyond stability, the system or a part of it would collapse until a new stable equilibrium is reached. The balance between supply and consumption is mainly maintained by controlling the power production, but also the electricity consumption or, in other words, the load is controlled. Controlling the load of the power supply system is important, if easily controllable power production capacity is limited. Temporary shortage of capacity causes high peaks in the energy price in the electricity market. Load control either reduces the electricity consumption during peak consumption and peak price or moves electricity consumption to some other time. The project Optimisation of Load Control is a part of the EDISON research program for distribution automation. The following areas were studied: Optimization of space heating and ventilation, when electricity price is time variable, load control model in power purchase optimization, optimization of direct load control sequences, interaction between load control optimization and power purchase optimization, literature on load control, optimization methods and field tests and response models of direct load control and the effects of the electricity market deregulation on load control. An overview of the main results is given in this chapter

Optimisation of load control

Energy Technology Data Exchange (ETDEWEB)

Koponen, P [VTT Energy, Espoo (Finland)

1998-08-01

Electricity cannot be stored in large quantities. That is why the electricity supply and consumption are always almost equal in large power supply systems. If this balance were disturbed beyond stability, the system or a part of it would collapse until a new stable equilibrium is reached. The balance between supply and consumption is mainly maintained by controlling the power production, but also the electricity consumption or, in other words, the load is controlled. Controlling the load of the power supply system is important, if easily controllable power production capacity is limited. Temporary shortage of capacity causes high peaks in the energy price in the electricity market. Load control either reduces the electricity consumption during peak consumption and peak price or moves electricity consumption to some other time. The project Optimisation of Load Control is a part of the EDISON research program for distribution automation. The following areas were studied: Optimization of space heating and ventilation, when electricity price is time variable, load control model in power purchase optimization, optimization of direct load control sequences, interaction between load control optimization and power purchase optimization, literature on load control, optimization methods and field tests and response models of direct load control and the effects of the electricity market deregulation on load control. An overview of the main results is given in this chapter

The Effect of Nanoparticles Percentage on Mechanical Behavior of Silica-Epoxy Nanocomposites

International Nuclear Information System (INIS)

Islam, M.S.; Masoodi, R.; Rostami, H.

2013-01-01

Silica-epoxy nanocomposites are very common among nanocomposites, which makes them very important. Several researchers have studied the effect of nanoparticle’s size, shape, and loading on mechanical behavior of silica-epoxy nanocomposites. This paper reviews the most important research done on the effect of nanoparticle loading on mechanical properties of silica-epoxy nanocomposites. While the main focus is the tensile behavior of nanocomposite, the compressive behavior and flexural behavior were also reviewed. Finally, some of the published experimental data were combined in the graphs, using dimensionless parameters. Later, the best fitted curves were used to derive some empirical formulas for mechanical properties of silica-epoxy nanocomposites as functions of weight or volume fraction of nanoparticles.

Application of Interval Type-2 Fuzzy Logic System in Short Term Load Forecasting on Special Days

Directory of Open Access Journals (Sweden)

Agus Dharma

2011-05-01

Full Text Available This paper presents the application of Interval Type-2 fuzzy logic systems (Interval Type-2 FLS in short term load forecasting (STLF on special days, study case in Bali Indonesia. Type-2 FLS is characterized by a concept called footprint of uncertainty (FOU that provides the extra mathematical dimension that equips Type-2 FLS with the potential to outperform their Type-1 counterparts. While a Type-2 FLS has the capability to model more complex relationships, the output of a Type-2 fuzzy inference engine needs to be type-reduced. Type reduction is used by applying the Karnik-Mendel (KM iterative algorithm. This type reduction maps the output of Type-2 FSs into Type-1 FSs then the defuzzification with centroid method converts that Type-1 reduced FSs into a number. The proposed method was tested with the actual load data of special days using 4 days peak load before special days and at the time of special day for the year 2002-2006. There are 20 items of special days in Bali that are used to be forecasted in the year 2005 and 2006 respectively. The test results showed an accurate forecasting with the mean average percentage error of 1.0335% and 1.5683% in the year 2005 and 2006 respectively.

Effect of epoxidised soybean oil loading as plasticiser on physical, mechanical and thermal properties of polyvinylchloride

Science.gov (United States)

Rahmah, M.; Nurazzi, N. Mohd; Farah Nordyana, A. R.; Syed Anas, S. M.

2017-07-01

The aim of this paper is to study the effect of epoxidised soybean oil (ESO) as an alternative plasticizer on physical, mechanical and thermal properties of plasticised polyvinyl chloride (PPVC). Samples were prepared using 10, 20, 30 and 40% by weight percent of ESO. The samples were characterized for density, water absorption, tensile, hardness and thermal properties. The addition of ESO as plasticizer in PVC had caused significant effect on the physical and mechanical properties of PPVC. Increasing of ESO loading had resulted in decreased density, tensile strength, tensile modulus but increased in elongation at break and shore hardness. From water absorption study, it was observed that the all the samples reached the plateau absorption at days 8 to 10 with absorption percentages of between 1.8 to 2%. In general the crystallinity of PPVC maintained between 10 to 13% with increase in ESO loading while the melting point ( Tm) is slightly decreased about 3 to 6°C. In this study, ESO which acts as plasticiser were found to result in lower glass transition temperature (Tg). The enhancements of super cooling with higher ESO loading were found to increase the crystallization temperature, promoting crystallisation and act as nucleating agent.

Mathematical model for body fat percentage of children with cerebral palsy

Directory of Open Access Journals (Sweden)

Eduardo Borba Neves

Full Text Available Abstract Introduction The aim of this study was to develop a specific mathematical model to estimate the body fat percentage (BF% of children with cerebral palsy, based on a Brazilian population of patients with this condition. Method This is a descriptive cross-sectional study. The study included 63 Caucasian children with cerebral palsy, both males and females, aged between three and ten-years-old. Participants were assessed for functional motor impairment using the Gross Motor Function Classification System (GMFCS, dual energy x-ray absorptiometry (DXA and skinfold thickness. Total body mass (TBM and skinfolds thickness from: triceps (Tr, biceps (Bi, Suprailiac (Si, medium thigh (Th, abdominal (Ab, medial calf (Ca and subscapular (Se were collected. Fat mass (FM was estimated by dual energy x-ray absorptiometry (gold standard. Results The model was built from multivariate linear regression; FM was set as a dependent variable and other anthropometric variables, age and sex, were set as independent variables. The final model was established as F%=((0.433xTBM + 0.063xTh + 0.167xSi - 6.768 ÷ TBM × 100, the R2 value was 0.950, R2adjusted=0.948 and the standard error of estimate was 1.039 kg. Conclusion This method was shown to be valid to estimate body fat percentage of children with cerebral palsy. Also, the measurement of skinfolds on both sides of the body showed good results in this modelling.

Annals of the International Geophysical Year solar radio emission during the International Geophysical Year

CERN Document Server

Smerd, S F

1969-01-01

Annals of the International Geophysical Year, Volume 34: Solar Radio Emission During the International Geophysical Year covers the significant solar radio emission events observed during the International Geophysical Year (IGY). This book is composed of six chapters, and begins with a summary of tabulated quantities describing solar radio emission during the IGY. The tabulated figures illustrate the method of recording the position of radio sources on the sun, the use of symbols in describing the structure of bursts observed at single frequencies, and the different types used in a spectral

Targeting Mast Cells and Basophils with Anti-FcεRIα Fab-Conjugated Celastrol-Loaded Micelles Suppresses Allergic Inflammation.

Science.gov (United States)

Peng, Xia; Wang, Juan; Li, Xianyang; Lin, Lihui; Xie, Guogang; Cui, Zelin; Li, Jia; Wang, Yuping; Li, Li

2015-12-01

Mast cells and basophils are effector cells in the pathophysiology of allergic diseases. Targeted elimination of these cells may be a promising strategy for the treatment of allergic disorders. Our present study aims at targeted delivery of anti-FcεRIα Fab-conjugated celastrol-loaded micelles toward FcεRIα receptors expressed on mast cells and basophils to have enhanced anti-allergic effect. To achieve this aim, we prepared celastrol-loaded (PEO-block-PPO-block-PEO, Pluronic) polymeric nanomicelles using thin-film hydration method. The anti-FcεRIα Fab Fragment was then conjugated to carboxyl groups on drug-loaded micelles via EDC amidation reaction. The anti-FcεRIα Fab-conjugated celastrol-loaded micelles revealed uniform particle size (93.43 ± 12.93 nm) with high loading percentage (21.2 ± 1.5% w/w). The image of micelles showed oval and rod like. The anti-FcεRIα Fab-conjugated micelles demonstrated enhanced cellular uptake and cytotoxity toward target KU812 cells than non-conjugated micelles in vitro. Furthermore, diffusion of the drug into the cells allowed an efficient induction of cell apoptosis. In mouse model of allergic asthma, treatment with anti-FcεRIα Fab-conjugated micelles increased lung accumulation of micelles, and significantly reduced OVA-sIgE, histamine and Th2 cytokines (IL-4, IL-5, TNF-α) levels, eosinophils infiltration and mucus production. In addition, in mouse model of passive cutaneous anaphylaxis, anti-FcεRIα Fab-conjugated celastrol-loaded micelles treatment significantly decreased extravasated evan's in the ear. These results indicate that anti-FcεRIα Fab-conjugated celastrol-loaded micelles can target and selectively kill mast cells and basophils which express FcεRIα, and may be efficient reagents for the treatment of allergic disorders and mast cell related diseases.

Optimal Adaptive Statistical Iterative Reconstruction Percentage in Dual-energy Monochromatic CT Portal Venography.

Science.gov (United States)

Zhao, Liqin; Winklhofer, Sebastian; Yang, Zhenghan; Wang, Keyang; He, Wen

2016-03-01

The aim of this article was to study the influence of different adaptive statistical iterative reconstruction (ASIR) percentages on the image quality of dual-energy computed tomography (DECT) portal venography in portal hypertension patients. DECT scans of 40 patients with cirrhosis (mean age, 56 years) at the portal venous phase were retrospectively analyzed. Monochromatic images at 60 and 70 keV were reconstructed with four ASIR percentages: 0%, 30%, 50%, and 70%. Computed tomography (CT) numbers of the portal veins (PVs), liver parenchyma, and subcutaneous fat tissue in the abdomen were measured. The standard deviation from the region of interest of the liver parenchyma was interpreted as the objective image noise (IN). The contrast-noise ratio (CNR) between PV and liver parenchyma was calculated. The diagnostic acceptability (DA) and sharpness of PV margins were obtained using a 5-point score. The IN, CNR, DA, and sharpness of PV were compared among the eight groups with different keV + ASIR level combinations. The IN, CNR, DA, and sharpness of PV of different keV + ASIR groups were all statistically different (P ASIR and 70 keV + 0% ASIR (filtered back-projection [FBP]) combination, respectively, whereas the largest and smallest objective IN were obtained in the 60 keV + 0% ASIR (FBP) and 70 keV + 70% combination. The highest DA and sharpness values of PV were obtained at 50% ASIR for 60 keV. An optimal ASIR percentage (50%) combined with an appropriate monochromatic energy level (60 keV) provides the highest DA in portal venography imaging, whereas for the higher monochromatic energy (70 keV) images, 30% ASIR provides the highest image quality, with less IN than 60 keV with 50% ASIR. Copyright © 2015 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

In vitro and in vivo evaluation of docetaxel-loaded stearic acid-modified Bletilla striata polysaccharide copolymer micelles.

Directory of Open Access Journals (Sweden)

Qingxiang Guan

Full Text Available Bletilla striata polysaccharides (BSPs have been used in pharmaceutical and biomedical industry, the aim of the present study was to explore a BSPs amphiphilic derivative to overcome its application limit as poorly water-soluble drug carriers due to water-soluble polymers. Stearic acid (SA was selected as a hydrophobic block to modify B. striata polysaccharides (SA-BSPs. Docetaxel (DTX-loaded SA-BSPs (DTX-SA-BSPs copolymer micelles were prepared and characterized. The DTX release percentage in vitro and DTX concentration in vivo was carried out by using high performance liquid chromatography. HepG2 and HeLa cells were subjected to MTT (3-(4, 5-dimethylthiazol-2-yl-2, 5-diphenyl tetrazonium bromide assay to evaluate the cell viability. In vitro evaluation of copolymer micelles showed higher drug encapsulation and loading capacity. The release percentage of DTX from DTX-SA-BSPs copolymer micelles and docetaxel injection was 66.93 ± 1.79% and 97.06 ± 1.56% in 2 days, respectively. The DTX-SA-BSPs copolymer micelles exhibited a sustained release of DTX. A 50% increase in growth inhibition was observed for HepG2 cells treated with DTX-SA-BSPs copolymer micelles as compared to those treated with docetaxel injection for 72 h. DTX-SA-BSPs copolymer micelles presented a similar growth inhibition effect on Hela cells. Furthermore, absolute bioavailability of DTX-SA-BSPs copolymer micelles was shown to be 1.39-fold higher than that of docetaxel injection. Therefore, SA-BSPs copolymer micelles may be used as potential biocompatible polymers for cancer chemotherapy.

Dietary phosphorus concentrations related to breaking load and chemical bone properties in heifers.

Science.gov (United States)

Williams, S N; Lawrence, L A; McDowell, L R; Warnick, A C; Wilkinson, N S

1990-04-01

Effects of dietary P on breaking load and chemical properties of bone were evaluated in growing beef heifers. Initially, 14 weaned Angus heifers received ad libitum a low P diet (.10% P dry basis) for 270 d. Heifers were subsequently randomly allotted into two groups (7 heifers/group) and received ad libitum either .12 or .20% P (dry basis). The experimental endpoint was 245 d of the treatment phase for nonpregnant and 3 wk postpartum for pregnant heifers. Results indicate that chemical and physical properties of bovine bones are sensitive to dietary P. Mineralization of rib bones was less at .12% P (dry basis). Rib bone density (g/cm3) and mineral content expressed on a per unit volume basis (mg/cm3) were the most sensitive parameters measured. Breaking load results of 12th ribs also indicated a greater amount of mineral present in heifers receiving .20% P (153.8 vs. 114.3 kg). Vertebral bone density and mineral concentrations on a per unit volume basis were also sensitive to dietary P and clearly ranked the two dietary P amounts, whereas percentage of bone ash or mineral concentration expressed on an ash basis did not.

Annual Percentage Rate and Annual Effective Rate: Resolving Confusion in Intermediate Accounting Textbooks

Science.gov (United States)

Vicknair, David; Wright, Jeffrey

2015-01-01

Evidence of confusion in intermediate accounting textbooks regarding the annual percentage rate (APR) and annual effective rate (AER) is presented. The APR and AER are briefly discussed in the context of a note payable and correct formulas for computing each is provided. Representative examples of the types of confusion that we found is presented…

Concise Approach for Determining the Optimal Annual Capacity Shortage Percentage using Techno-Economic Feasibility Parameters of PV Power System

Science.gov (United States)

Alghoul, M. A.; Ali, Amer; Kannanaikal, F. V.; Amin, N.; Sopian, K.

2017-11-01

PV power systems have been commercially available and widely used for decades. The performance of a reliable PV system that fulfils the expectations requires correct input data and careful design. Inaccurate input data of the techno-economic feasibility would affect the size, cost aspects, stability and performance of PV power system on the long run. The annual capacity shortage is one of the main input data that should be selected with careful attention. The aim of this study is to reveal the effect of different annual capacity shortages on the techno-economic feasibility parameters and determining the optimal value for Baghdad city location using HOMER simulation tool. Six values of annual capacity shortage percentages (0%, 1%, 2%, 3%, 4%, and 5%), and wide daily load profile range (10 kWh - 100 kWh) are implemented. The optimal annual capacity shortage is the value that always "wins" when each techno-economic feasibility parameter is at its optimal/ reasonable criteria. The results showed that the optimal annual capacity shortage that reduces significantly the cost of PV power system while keeping the PV system with reasonable technical feasibility is 3%. This capacity shortage value can be carried as a reference value in future works for Baghdad city location. Using this approach of analysis at other locations, annual capacity shortage can be always offered as a reference value for those locations.

[Prognosis and percentage of employment after the surgery in Marfan syndrome].

Science.gov (United States)

Adachi, H; Kawahito, K; Yamaguchi, A; Murata, S; Ino, T

2002-07-01

The percentage of employment in the Marfan patient after the Bentall procedure was studied. Eighteen of 20 patients (90%) returned to their daily life and are working well after the surgery. Seven patients (35%) needed the second operation due to the enlargement of false lumen during the follow-up period. Fatal cardiovascular accidents occurred in 7 their families (35%) in our series. Careful follow-up, adequate selection of medical and surgical treatment including second operation, medical examination of their families are important to keep the good quality of life in the Marfan patient.

Short term load forecasting technique based on the seasonal exponential adjustment method and the regression model

International Nuclear Information System (INIS)

Wu, Jie; Wang, Jianzhou; Lu, Haiyan; Dong, Yao; Lu, Xiaoxiao

2013-01-01

Highlights: ► The seasonal and trend items of the data series are forecasted separately. ► Seasonal item in the data series is verified by the Kendall τ correlation testing. ► Different regression models are applied to the trend item forecasting. ► We examine the superiority of the combined models by the quartile value comparison. ► Paired-sample T test is utilized to confirm the superiority of the combined models. - Abstract: For an energy-limited economy system, it is crucial to forecast load demand accurately. This paper devotes to 1-week-ahead daily load forecasting approach in which load demand series are predicted by employing the information of days before being similar to that of the forecast day. As well as in many nonlinear systems, seasonal item and trend item are coexisting in load demand datasets. In this paper, the existing of the seasonal item in the load demand data series is firstly verified according to the Kendall τ correlation testing method. Then in the belief of the separate forecasting to the seasonal item and the trend item would improve the forecasting accuracy, hybrid models by combining seasonal exponential adjustment method (SEAM) with the regression methods are proposed in this paper, where SEAM and the regression models are employed to seasonal and trend items forecasting respectively. Comparisons of the quartile values as well as the mean absolute percentage error values demonstrate this forecasting technique can significantly improve the accuracy though models applied to the trend item forecasting are eleven different ones. This superior performance of this separate forecasting technique is further confirmed by the paired-sample T tests

Finite element-based limit load of piping branch junctions under combined loadings

International Nuclear Information System (INIS)

Xuan Fuzhen; Li Peining

2004-01-01

The limit load is an important input parameter in engineering defect-assessment procedures and strength design. In the present work, a total of 100 different piping branch junction models for the limit load calculation were performed under combined internal pressure and moments in use of non-linear finite element (FE) method. Three different existing accumulation rules for limit load, i.e., linear equation, parabolic equation and quadratic equation were discussed on the basis of FE results. A novel limit load solution was developed based on detailed three-dimensional FE limit analyses which accommodated the geometrical parameter influence, together with analytical solutions based on equilibrium stress fields. Finally, six experimental results were provided to justify the presented equation. According to the FE limit analysis, limit load interaction of the piping tees under combined pressure and moments has a relationship with the geometrical parameters, especially with the diameter ratio d/D. The predicted limit loads from the presented formula are very close to the experimental data. The resulting limit load solution is given in a closed form, and thus can be easily used in practice

Short term load forecasting of anomalous load using hybrid soft computing methods

Science.gov (United States)

Rasyid, S. A.; Abdullah, A. G.; Mulyadi, Y.

2016-04-01

Load forecast accuracy will have an impact on the generation cost is more economical. The use of electrical energy by consumers on holiday, show the tendency of the load patterns are not identical, it is different from the pattern of the load on a normal day. It is then defined as a anomalous load. In this paper, the method of hybrid ANN-Particle Swarm proposed to improve the accuracy of anomalous load forecasting that often occur on holidays. The proposed methodology has been used to forecast the half-hourly electricity demand for power systems in the Indonesia National Electricity Market in West Java region. Experiments were conducted by testing various of learning rate and learning data input. Performance of this methodology will be validated with real data from the national of electricity company. The result of observations show that the proposed formula is very effective to short-term load forecasting in the case of anomalous load. Hybrid ANN-Swarm Particle relatively simple and easy as a analysis tool by engineers.

A novel body circumferences-based estimation of percentage body fat.

Science.gov (United States)

Lahav, Yair; Epstein, Yoram; Kedem, Ron; Schermann, Haggai

2018-03-01

Anthropometric measures of body composition are often used for rapid and cost-effective estimation of percentage body fat (%BF) in field research, serial measurements and screening. Our aim was to develop a validated estimate of %BF for the general population, based on simple body circumferences measures. The study cohort consisted of two consecutive samples of health club members, designated as 'development' (n 476, 61 % men, 39 % women) and 'validation' (n 224, 50 % men, 50 % women) groups. All subjects underwent anthropometric measurements as part of their registration to a health club. Dual-energy X-ray absorptiometry (DEXA) scan was used as the 'gold standard' estimate of %BF. Linear regressions where used to construct the predictive equation (%BFcal). Bland-Altman statistics, Lin concordance coefficients and percentage of subjects falling within 5 % of %BF estimate by DEXA were used to evaluate accuracy and precision of the equation. The variance inflation factor was used to check multicollinearity. Two distinct equations were developed for men and women: %BFcal (men)=10·1-0·239H+0·8A-0·5N; %BFcal (women)=19·2-0·239H+0·8A-0·5N (H, height; A, abdomen; N, neck, all in cm). Bland-Altman differences were randomly distributed and showed no fixed bias. Lin concordance coefficients of %BFcal were 0·89 in men and 0·86 in women. About 79·5 % of %BF predictions in both sexes were within ±5 % of the DEXA value. The Durnin-Womersley skinfolds equation was less accurate in our study group for prediction of %BF than %BFcal. We conclude that %BFcal offers the advantage of obtaining a reliable estimate of %BF from simple measurements that require no sophisticated tools and only a minimal prior training and experience.

HANPP Collection: Human Appropriation of Net Primary Productivity as a Percentage of Net Primary Productivity

Data.gov (United States)

National Aeronautics and Space Administration — The Human Appropriation of Net Primary Productivity (HANPP) as a Percentage of Net Primary Product (NPP) portion of the HANPP Collection represents a map identifying...

Load-redistribution strategy based on time-varying load against cascading failure of complex network

International Nuclear Information System (INIS)

Liu Jun; Shi Xin; Wang Kai; Shi Wei-Ren; Xiong Qing-Yu

2015-01-01

Cascading failure can cause great damage to complex networks, so it is of great significance to improve the network robustness against cascading failure. Many previous existing works on load-redistribution strategies require global information, which is not suitable for large scale networks, and some strategies based on local information assume that the load of a node is always its initial load before the network is attacked, and the load of the failure node is redistributed to its neighbors according to their initial load or initial residual capacity. This paper proposes a new load-redistribution strategy based on local information considering an ever-changing load. It redistributes the loads of the failure node to its nearest neighbors according to their current residual capacity, which makes full use of the residual capacity of the network. Experiments are conducted on two typical networks and two real networks, and the experimental results show that the new load-redistribution strategy can reduce the size of cascading failure efficiently. (paper)

Preparation of magnetic polylactic acid microspheres and investigation of its releasing property for loading curcumin

Energy Technology Data Exchange (ETDEWEB)

Li Fengxia [Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Science, Northeast Forestry University, Harbin 150040 (China); Li Xiaoli, E-mail: lixiaoli0903@163.com [Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Science, Northeast Forestry University, Harbin 150040 (China); Li Bin, E-mail: libinzh62@163.com [Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Science, Northeast Forestry University, Harbin 150040 (China)

2011-11-15

In order to obtain a targeting drug carrier system, magnetic polylactic acid (PLA) microspheres loading curcumin were synthesized by the classical oil-in-water emulsion solvent-evaporation method. In the Fourier transform infrared spectra of microspheres, the present functional groups of PLA were all kept invariably. The morphology and size distribution of magnetic microspheres were observed with scanning electron microscopy and dynamic light scattering, respectively. The results showed that the microspheres were regularly spherical and the surface was smooth with a diameter of 0.55-0.75 {mu}m. Magnetic Fe{sub 3}O{sub 4} was loaded in PLA microspheres and the content of magnetic particles was 12 wt% through thermogravimetric analysis. The magnetic property of prepared microspheres was measured by vibrating sample magnetometer. The results showed that the magnetic microspheres exhibited typical superparamagnetic behavior and the saturated magnetization was 14.38 emu/g. Through analysis of differential scanning calorimetry, the curcumin was in an amorphous state in the magnetic microspheres. The drug loading, encapsulation efficiency and releasing properties of curcumin in vitro were also investigated by ultraviolet-visible spectrum analysis. The results showed that the drug loading and encapsulation efficiency were 8.0% and 24.2%, respectively. And curcumin was obviously slowly released because the cumulative release percentage of magnetic microspheres in the phosphate buffer (pH=7.4) solution was only 49.01% in 72 h, and the basic release of curcumin finished in 120 h. - Highlights: > We prepare magnetic polylactic acid microspheres loading curcumin. > The classical oil-in-water emulsion solvent-evaporation method is used. > The magnetic microspheres are regularly spherical with a diameter of 0.55-0.75 {mu}m. > They show a certain sustained release effect on in vitro drug releasing.

Preparation of magnetic polylactic acid microspheres and investigation of its releasing property for loading curcumin

International Nuclear Information System (INIS)

Li Fengxia; Li Xiaoli; Li Bin

2011-01-01

In order to obtain a targeting drug carrier system, magnetic polylactic acid (PLA) microspheres loading curcumin were synthesized by the classical oil-in-water emulsion solvent-evaporation method. In the Fourier transform infrared spectra of microspheres, the present functional groups of PLA were all kept invariably. The morphology and size distribution of magnetic microspheres were observed with scanning electron microscopy and dynamic light scattering, respectively. The results showed that the microspheres were regularly spherical and the surface was smooth with a diameter of 0.55-0.75 μm. Magnetic Fe 3 O 4 was loaded in PLA microspheres and the content of magnetic particles was 12 wt% through thermogravimetric analysis. The magnetic property of prepared microspheres was measured by vibrating sample magnetometer. The results showed that the magnetic microspheres exhibited typical superparamagnetic behavior and the saturated magnetization was 14.38 emu/g. Through analysis of differential scanning calorimetry, the curcumin was in an amorphous state in the magnetic microspheres. The drug loading, encapsulation efficiency and releasing properties of curcumin in vitro were also investigated by ultraviolet-visible spectrum analysis. The results showed that the drug loading and encapsulation efficiency were 8.0% and 24.2%, respectively. And curcumin was obviously slowly released because the cumulative release percentage of magnetic microspheres in the phosphate buffer (pH=7.4) solution was only 49.01% in 72 h, and the basic release of curcumin finished in 120 h. - Highlights: → We prepare magnetic polylactic acid microspheres loading curcumin. → The classical oil-in-water emulsion solvent-evaporation method is used. → The magnetic microspheres are regularly spherical with a diameter of 0.55-0.75 μm. → They show a certain sustained release effect on in vitro drug releasing.

Laterally loaded masonry

DEFF Research Database (Denmark)

Raun Gottfredsen, F.

In this thesis results from experiments on mortar joints and masonry as well as methods of calculation of strength and deformation of laterally loaded masonry are presented. The strength and deformation capacity of mortar joints have been determined from experiments involving a constant compressive...... stress and increasing shear. The results show a transition to pure friction as the cohesion is gradually destroyed. An interface model of a mortar joint that can take into account this aspect has been developed. Laterally loaded masonry panels have also been tested and it is found to be characteristic...... that laterally loaded masonry exhibits a non-linear load-displacement behaviour with some ductility....

Critical Axial Load

Directory of Open Access Journals (Sweden)

Walt Wells

2008-01-01

Full Text Available Our objective in this paper is to solve a second order differential equation for a long, simply supported column member subjected to a lateral axial load using Heun's numerical method. We will use the solution to find the critical load at which the column member will fail due to buckling. We will calculate this load using Euler's derived analytical approach for an exact solution, as well as Euler's Numerical Method. We will then compare the three calculated values to see how much they deviate from one another. During the critical load calculation, it will be necessary to calculate the moment of inertia for the column member.

Influence of the recycled material percentage on the rheological behaviour of HDPE for injection moulding process.

Science.gov (United States)

Javierre, C; Clavería, I; Ponz, L; Aísa, J; Fernández, A

2007-01-01

The amount of polymer material wasted during thermoplastic injection moulding is very high. It comes from both the feed system of the part, and parts necessary to set up the mould, as well as the scrap generated along the process due to quality problems. The residues are managed through polymer recycling that allows reuse of the materials in the manufacturing injection process. Recycling mills convert the parts into small pieces that are used as feed material for injection, by mixing the recycled feedstock in different percentages with raw material. This mixture of both raw and recycled material modifies material properties according to the percentage of recycled material introduced. Some of the properties affected by this modification are those related to rheologic behaviour, which strongly conditions the future injection moulding process. This paper analyzes the rheologic behaviour of material with different percentages of recycled material by means of a capillary rheometer, and evaluates the influence of the corresponding viscosity curves obtained on the injection moulding process, where small variations of parameters related to rheological behaviour, such as pressure or clamping force, can be critical to the viability and cost of the parts manufactured by injection moulding.

Optimizing ultrasound molecular imaging of secreted frizzled related protein 2 expression in angiosarcoma.

Directory of Open Access Journals (Sweden)

James K Tsuruta

Full Text Available Secreted frizzled related protein 2 (SFRP2 is a tumor endothelial marker expressed in angiosarcoma. Previously, we showed ultrasound molecular imaging with SFRP2-targeted contrast increased average video pixel intensity (VI of angiosarcoma vessels by 2.2 ± 0.6 VI versus streptavidin contrast. We hypothesized that redesigning our contrast agents would increase imaging performance. Improved molecular imaging reagents were created by combining NeutrAvidin™-functionalized microbubbles with biotinylated SFRP2 or IgY control antibodies. When angiosarcoma tumors in nude mice reached 8 mm, time-intensity, antibody loading, and microbubble dose experiments optimized molecular imaging. 10 minutes after injection, the control-subtracted time-intensity curve (TIC for SFRP2-targeted contrast reached a maximum, after subtracting the contribution of free-flowing contrast. SFRP2 antibody-targeted VI was greater when contrast was formulated with 10-fold molar excess of maleimide-activated NeutrAvidin™ versus 3-fold (4.5 ± 0.18 vs. 0.32 ± 0.15, VI ± SEM, 5 x 106 dose, p < 0.001. Tumor vasculature returned greater average video pixel intensity using 5 x 107 versus 5 x 106 microbubbles (21.2 ± 2.5 vs. 4.5 ± 0.18, p = 0.0011. Specificity for tumor vasculature was confirmed by low VI for SFRP2-targeted, and control contrast in peri-tumoral vasculature (3.2 ± 0.52 vs. 1.6 ± 0.71, p = 0.92. After optimization, average video pixel intensity of tumor vasculature was 14.2 ± 3.0 VI units higher with SFRP2-targeted contrast versus IgY-targeted control (22.1 ± 2.5 vs. 7.9 ± 1.6, p < 0.001. After log decompression, 14.2 ΔVI was equal to ~70% higher signal, in arbitray acoustic units (AU, for SFRP2 versus IgY. This provided ~18- fold higher acoustic signal enhancement than provided previously by 2.2 ΔVI. Basing our targeted contrast on NeutrAvidin™-functionalized microbubbles, using IgY antibodies for our control contrast, and optimizing our imaging protocol

78 FR 32991 - Medicaid Program; Increased Federal Medical Assistance Percentage Changes Under the Affordable...

Science.gov (United States)

2013-06-03

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Medicare & Medicaid Services 42 CFR Part 433 [CMS-2327-CN] RIN 0938-AR38 Medicaid Program; Increased Federal Medical Assistance Percentage Changes Under the Affordable Care Act of 2010; Correction AGENCY: Centers for Medicare & Medicaid Services (CMS...

Cognitive Load of Learner Control: Extraneous or Germane Load?

Directory of Open Access Journals (Sweden)

Mieke Vandewaetere

2013-01-01

Full Text Available Computer-based learning environments become more tailored when learners can exert control over one or more parts of the learning process. Learner control (LC demands additional efforts of learners because, in addition to learning, they also have to monitor that learning. As a consequence, LC may cause additional cognitive load and even cognitive overload. The central question in this study is what type of cognitive load is induced by LC and whether the experienced load is related to learning outcomes. For this study, half of the students had control over task selection, while the other half had not. Within each condition, students were assigned to a single treatment, with the primary task to solely focus on the learning content, and a dual treatment, comprising a primary task and a secondary task. The results indicate that LC did not impose higher cognitive load as measured by secondary task scores and mental effort ratings.

Lateral loadings on snubber assemblies

International Nuclear Information System (INIS)

Raphael, L.S.

1981-01-01

This paper examines the installation of snubber assemblies in power plants with respect to transverse or lateral loads as well as axial loads. Evaluation of the effects of low level, lateral loads was performed by analytical means. At higher loadings, the snubber assembly could no longer be treated as a column; therefore, the effects of lateral loadings was determined by test. The test consisted of applying both lateral and axial loads simultaneously. Results of both the analysis and the test showed that the application of lateral loads had a considerable effect on the snubber assemblies

Acyclovir-Loaded Chitosan Nanospheres from Nano-Emulsion Templating for the Topical Treatment of Herpesviruses Infections

Directory of Open Access Journals (Sweden)

Manuela Donalisio

2018-04-01

Full Text Available Acyclovir is not a good candidate for passive permeation since its polarity and solubility limit is partitioning into the stratum corneum. This work aims to develop a new topical formulation for the acyclovir delivery. New chitosan nanospheres (NS were prepared by a modified nano-emulsion template method. Chitosan NS were characterized by Dynamic Light Scattering (DLS, Transmission Electron Microscopy (TEM, and an in vitro release study. The in vitro skin permeation experiment was carried out using Franz cells and was equipped with porcine skin. Biological studies were performed on the Vero cell line infected by HSV-1 and HSV-2 strains. The acyclovir loaded chitosan NS appeared with a spherical shape, a size of about 200 nm, and a negative zeta potential of about 40.0 mV. The loading capacity of the drug was about 8.5%. In vitro release demonstrated that the percentage of acyclovir delivered from the nanospheres was approximately 30% after six hours. The in vitro skin permeation studies confirmed an improved amount of permeated acyclovir. The acyclovir-NS complex displayed a higher antiviral activity than that of free acyclovir against both the HSV-1 and the HSV-2 strain. The acyclovir-loaded NS showed no anti-proliferative activity and no signs of cytotoxicity induced by NS was detected. Confocal laser scanning microscopy confirmed that the NS are taken up by the cells.

Foraging loads of red wood ants: Formica aquilonia (Hymenoptera: Formicidae in relation to tree characteristics and stand age

Directory of Open Access Journals (Sweden)

Heloise Gibb

2016-05-01

Full Text Available Background. Foraging efficiency is critical in determining the success of organisms and may be affected by a range of factors, including resource distance and quality. For social insects such as ants, outcomes must be considered at the level of both the individual and the colony. It is important to understand whether anthropogenic disturbances, such as forestry, affect foraging loads, independent of effects on the quality and distribution of resources. We asked if ants harvest greater loads from more distant and higher quality resources, how individual efforts scale to the colony level, and whether worker loads are affected by stand age. Methods. First, we performed a fine-scale study examining the effect of distance and resource quality (tree diameter and species on harvesting of honeydew by red wood ants, Formica aquilonia, in terms of crop load per worker ant and numbers of workers walking up and down each tree (ant activity (study 1. Second, we modelled what the combination of load and worker number responses meant for colony-level foraging loads. Third, at a larger scale, we asked whether the relationship between worker load and resource quality and distance depended on stand age (study 2. Results. Study 1 revealed that seventy percent of ants descending trees carried honeydew, and the percentage of workers that were honeydew harvesters was not related to tree species or diameter, but increased weakly with distance. Distance positively affected load mass in both studies 1 and 2, while diameter had weak negative effects on load. Relationships between load and distance and diameter did not differ among stands of different ages. Our model showed that colony-level loads declined much more rapidly with distance for small diameter than large diameter trees. Discussion. We suggest that a negative relationship between diameter and honeydew load detected in study 1 might be a result of crowding on large diameter trees close to nests, while the

Cognitive Load and Cooperation

DEFF Research Database (Denmark)

Døssing, Felix Sebastian; Piovesan, Marco; Wengström, Erik Roland

2017-01-01

We study the effect of intuitive and reflective processes on cooperation using cognitive load. Compared with time constraint, which has been used in the previous literature, cognitive load is a more direct way to block reflective processes, and thus a more suitable way to study the link between...... intuition and cooperation. Using a repeated public goods game, we study the effect of different levels of cognitive load on contributions. We show that a higher cognitive load increases the initial level of cooperation. In particular, subjects are significantly less likely to fully free ride under high...... cognitive load....

A low-power CMOS integrated sensor for CO2 detection in the percentage range

NARCIS (Netherlands)

Humbert, A.; Tuerlings, B.J.; Hoofman, R.J.O.M.; Tan, Z.; Gravesteijn, D.J.; Pertijs, M.A.P.; Bastiaansen, C.W.M.; Soccol, D.

2013-01-01

Within the Catrene project PASTEUR, a low-cost, low-power capacitive carbon dioxide sensor has been developed for tracking CO2 concentration in the percentage range. This paper describes this sensor, which operates at room temperature where it exhibits short response times as well as reversible

Generation and Characterization of Polyclonal Antibody Against Part of Immunoglobulin Constant Heavy υ Chain of Goose

Science.gov (United States)

Zhao, Panpan; Guo, Yongli; Ma, Bo; Wang, Junwei

2014-01-01

Immunoglobulin Y (abbreviated as IgY) is a type of immunoglobulin that is the major antibody in bird, reptile, and lungfish blood. IgY consists of two light (λ) and two heavy (υ) chains. In the present study, polyclonal antibody against IgYFc was generated and evaluated. rIgYCυ3/Cυ4 was expressed in Escherichia coli, purified and utilized to raise polyclonal antibody in rabbit. High affinity antisera were obtained, which successfully detected the antigen at a dilution of 1:204,800 for ELISA assay. The antibody can specifically recognize both rIgYCυ3/Cυ4 and native IgY by Western bolt analysis. Furthermore, the serum of Grus japonensis or immunoglobulin of chicken, duck, turkey, and silkie samples and dynamic changes of serum GoIgY after immunogenicity with GPV-VP3-virus-like particles (GPV-VP3-VLPs) can be detected with the anti-GoIgYFc polyclonal antibody. These results suggested that the antibody is valuable for the investigation of biochemical properties and biological functions of GoIgY. PMID:25171010

Discovery of iron group impurity ion spin states in single crystal Y{sub 2}SiO{sub 5} with strong coupling to whispering gallery photons

Energy Technology Data Exchange (ETDEWEB)

Goryachev, Maxim; Farr, Warrick G.; Carmo Carvalho, Natalia do; Creedon, Daniel L.; Le Floch, Jean-Michel [ARC Centre of Excellence for Engineered Quantum Systems, University of Western Australia, 35 Stirling Highway, Crawley WA 6009 (Australia); Probst, Sebastian [Physikalisches Institut, Karlsruhe Institute of Technology, D-76128 Karlsruhe (Germany); Bushev, Pavel [Experimentalphysik, Universität des Saarlandes, D-66123 Saarbrücken (Germany); Tobar, Michael E., E-mail: michael.tobar@uwa.edu.au [ARC Centre of Excellence for Engineered Quantum Systems, School of Physics, University of Western Australia, Crawley 6009 (Australia)

2015-06-08

Interaction of Whispering Gallery Modes (WGMs) with dilute spin ensembles in solids is an interesting paradigm of Hybrid Quantum Systems potentially beneficial for Quantum Signal Processing applications. Unexpected ion transitions are measured in single crystal Y{sub 2}SiO{sub 5} using WGM spectroscopy with large Zero Field Splittings at 14.7 GHz, 18.4 GHz, and 25.4 GHz, which also feature considerable anisotropy of the g-tensors as well as two inequivalent lattice sites, indicating spins from Iron Group Ion (IGI) impurities. The comparison of undoped and Rare-Earth doped crystals reveal that the IGIs are introduced during co-doping of Eu{sup 3+} or Er{sup 3+} with concentration at much lower levels of order 100 ppb. The strong coupling regime between an ensemble of IGI spins and WGM photons have been demonstrated at 18.4 GHz and near zero field. This approach together with useful optical properties of these ions opens avenues for “spins-in-solids” Quantum Electrodynamics.

Limit loads in nozzles

International Nuclear Information System (INIS)

Zouain, N.

1983-01-01

The static method for the evaluation of the limit loads of a perfectly elasto-plastic structure is presented. Using the static theorem of Limit Analysis and the Finite Element Method, a lower bound for the colapso load can be obtained through a linear programming problem. This formulation if then applied to symmetrically loaded shells of revolution and some numerical results of limit loads in nozzles are also presented. (Author) [pt

The Impact of Load Carriage on Measures of Power and Agility in Tactical Occupations: A Critical Review.

Science.gov (United States)

Joseph, Aaron; Wiley, Amy; Orr, Robin; Schram, Benjamin; Dawes, J Jay

2018-01-07

The current literature suggests that load carriage can impact on a tactical officer's mobility, and that survival in the field may rely on the officer's mobility. The ability for humans to generate power and agility is critical for performance of the high-intensity movements required in the field of duty. The aims of this review were to critically examine the literature investigating the impacts of load carriage on measures of power and agility and to synthesize the findings. The authors completed a search of the literature using key search terms in four databases. After relevant studies were located using strict inclusion and exclusion criteria, the studies were critically appraised using the Downs and Black Checklist and relevant data were extracted and tabled. Fourteen studies were deemed relevant for this review, ranging in percentage quality scores from 42.85% to 71.43%. Outcome measures used in these studies to indicate levels of power and agility included short-distance sprints, vertical jumps, and agility runs, among others. Performance of both power and agility was shown to decrease when tactical load was added to the participants. This suggests that the increase in weight carried by tactical officers may put this population at risk of injury or fatality in the line of duty.

The Impact of Load Carriage on Measures of Power and Agility in Tactical Occupations: A Critical Review

Directory of Open Access Journals (Sweden)

Aaron Joseph

2018-01-01

Full Text Available The current literature suggests that load carriage can impact on a tactical officer’s mobility, and that survival in the field may rely on the officer’s mobility. The ability for humans to generate power and agility is critical for performance of the high-intensity movements required in the field of duty. The aims of this review were to critically examine the literature investigating the impacts of load carriage on measures of power and agility and to synthesize the findings. The authors completed a search of the literature using key search terms in four databases. After relevant studies were located using strict inclusion and exclusion criteria, the studies were critically appraised using the Downs and Black Checklist and relevant data were extracted and tabled. Fourteen studies were deemed relevant for this review, ranging in percentage quality scores from 42.85% to 71.43%. Outcome measures used in these studies to indicate levels of power and agility included short-distance sprints, vertical jumps, and agility runs, among others. Performance of both power and agility was shown to decrease when tactical load was added to the participants. This suggests that the increase in weight carried by tactical officers may put this population at risk of injury or fatality in the line of duty.

Thermal management analysis of a Li-ion battery cell using phase change material loaded with carbon fibers

International Nuclear Information System (INIS)

Samimi, Fereshteh; Babapoor, Aziz; Azizi, Mohammadmehdi; Karimi, Gholamreza

2016-01-01

High latent heat of PCMs (phase change materials) has made them as one of the most important materials for thermal management purposes. However, PCMs’ low thermal diffusivities could limit their use in applications which require fast thermal response. The goal of this study is to simulate thermal performance of a lithium ion battery cell in the presence of carbon fiber-PCM composites. The effect of carbon fiber loading within the PCM on thermal performance is studied and the results are compared with the experimental data. The results showed that the presence of carbon fibers increases the effective thermal conductivity of PCM and hence influences temperature distribution within the cell. PCM composites containing higher percentages of carbon fibers present a more uniform temperature distribution. The results showed that the minimum and maximum thermal conductivity enhancement of 85% and 155% respectively (105% on average). A reasonable agreement is obtained between the simulation results and the experimental data. - Highlights: • Phase change materials (PCMs) are used for thermal management purposes. • Effective thermal conductivity of PCMs can be enhanced by loading carbon fibers. • Thermal performance of a battery is studied in presence of carbon fiber loaded PCM. • The presence of carbon fibers in the PCM can improve Li-ion battery performance.

Diluting the Burden of Load: Perceptual Load Effects Are Simply Dilution Effects

Science.gov (United States)

Tsal, Yehoshua; Benoni, Hanna

2010-01-01

The substantial distractor interference obtained for small displays when the target appears alone is reduced in large displays when the target is embedded among neutral letters. This finding has been interpreted as reflecting low-load and high-load processing, respectively, thereby supporting the theory of perceptual load (Lavie & Tsal, 1994).…

Perceptual load affects exogenous spatial orienting while working memory load does not.

Science.gov (United States)

Santangelo, Valerio; Finoia, Paola; Raffone, Antonino; Belardinelli, Marta Olivetti; Spence, Charles

2008-01-01

We examined whether or not increasing visual perceptual load or visual working memory (WM) load would affect the exogenous orienting of visuo-spatial attention, in order to assess whether or not exogenous orienting is genuinely automatic. In Experiment 1, we manipulated visual perceptual load by means of a central morphing shape that in some trials morphed into a particular target shape (a rectangle) that participants had to detect. In Experiment 2, the possibility that the presentation of any changing stimulus at fixation would eliminate exogenous orienting was ruled out, by presenting two alternating letters at fixation. In Experiment 3, we manipulated visual WM load by means of arrays consisting of three (low-load) or five (high-load) randomly located coloured squares. The participants had to remember these items in order to judge whether a cued square had been presented in the same or different colour at the end of each trial. In all the experiments, exogenous visuo-spatial attentional orienting was measured by means of an orthogonal spatial cuing task, in which the participants had to discriminate the elevation (up vs. down) of a visual target previously cued by a spatially nonpredictive visual cue. The results showed that increasing the perceptual load of the task eliminated the exogenous orienting of visuo-spatial attention. By contrast, increasing the WM load had no effect on spatial orienting. These results are discussed in terms of the light that they shed on claims regarding the automaticity of visuo-spatial exogenous orienting.

Load Balancing in Hypergraphs

Science.gov (United States)

Delgosha, Payam; Anantharam, Venkat

2018-03-01

Consider a simple locally finite hypergraph on a countable vertex set, where each edge represents one unit of load which should be distributed among the vertices defining the edge. An allocation of load is called balanced if load cannot be moved from a vertex to another that is carrying less load. We analyze the properties of balanced allocations of load. We extend the concept of balancedness from finite hypergraphs to their local weak limits in the sense of Benjamini and Schramm (Electron J Probab 6(23):13, 2001) and Aldous and Steele (in: Probability on discrete structures. Springer, Berlin, pp 1-72, 2004). To do this, we define a notion of unimodularity for hypergraphs which could be considered an extension of unimodularity in graphs. We give a variational formula for the balanced load distribution and, in particular, we characterize it in the special case of unimodular hypergraph Galton-Watson processes. Moreover, we prove the convergence of the maximum load under some conditions. Our work is an extension to hypergraphs of Anantharam and Salez (Ann Appl Probab 26(1):305-327, 2016), which considered load balancing in graphs, and is aimed at more comprehensively resolving conjectures of Hajek (IEEE Trans Inf Theory 36(6):1398-1414, 1990).

An investigation into the causes of low calving percentage in communally grazed cattle in Jericho, North West Province

Directory of Open Access Journals (Sweden)

E. Mokantla

2004-06-01

Full Text Available The communal grazing system is generally understood to have a low input, low output type of management. However, the actual inputs and outputs of the farmers are not well known and the farmers are often unaware of their problems. Although the causes of low calving percentage are well understood in commercial beef farming enterprises in South Africa, the same is not true for communal farming systems. The aim of this study was to determine the reproductive performance of beef cattle on a communal farming system in Jericho, NorthWest Province. Ten farmers from five villages with a total of 265 cows and 13 bulls were purposively selected. The selection criteria were that each farmer had to have a minimum of 10 breeding cows and a bull and be willing to participate in the study. This was followed by a 12-month longitudinal study with monthly herd visits where cows were examined rectally and bulls (n = 13 were subjected to a single breeding soundness evaluation. The calving percentage was found to be 37.7 %. This is lower than the recorded percentages for commercial beef cattle on extensive grazing. The factors playing a role in low calving percentage were ranked using field data. From this it appeared that failure of cows to become pregnant was the main cause of poor calving percentage as opposed of loss of calves through abortion or resorption. Sub-fertility of the bulls was found to be of great significance and it is proposed that this be included in extension messages and that bulls be fertility tested routinely. Poor body condition score of cows, mainly caused by poor management, was also considered to play a major role in reducing pregnancy rates. Infectious diseases like trichomonosis, campylobacteriosis and brucellosis played a much leser role than anticipated.

Effect on physical properties of laterite soil with difference percentage of sodium bentonite

Science.gov (United States)

Kasim, Nur Aisyah; Azmi, Nor Azizah Che; Mukri, Mazidah; Noor, Siti Nur Aishah Mohd

2017-08-01

This research was carried out in an attempt to know the physical properties of laterite soil with the appearance of difference percentage of sodium bentonite. Lateritic soils usually develop in tropical and other regions with similar hot and humid climate, where heavy rainfall, warm temperature and well drainage lead to the formation of thick horizons of reddish lateritic soil profiles rich in iron and aluminium. When sodium predominates, a large amount of water can be absorbed in the interlayer, resulting in the remarkable swelling properties observed with hydrating sodium bentonite. There are some basic physical properties test conducted in this research which are Specific Gravity Test, pH Test, Sieve Analysis, Hydrometer Test, Shrinkage Limit and Atterberg Limit. The test will be conducted with 0%, 5%, 10%, 15% and 20% of sodium bentonite. Each test will be repeated three times for the accuracy of the result. From the physical properties test the soil properties characteristic react with the sodium bentonite can be determine. Therefore the best percentage of sodium bentonite admixture can be determined for laterite soil. The outcomes of this study give positive results due to the potential of sodium bentonite to improve the laterite soil particle.

Electromagnetic absorber composite made of carbon fibers loaded epoxy foam for anechoic chamber application

International Nuclear Information System (INIS)

Méjean, Chloé; Pometcu, Laura; Benzerga, Ratiba; Sharaiha, Ala; Le Paven-Thivet, Claire; Badard, Mathieu; Pouliguen, Philippe

2017-01-01

Highlights: • Carbon fibers loaded epoxy foam composites are proposed as microwave absorbers. • Dielectric properties (ε′, tanδ) of composites increase with carbon fibers content and length. • S 11 coefficient of a pyramidal prototype was characterized in anechoic chamber. • Epoxy prototype shows better absorption performance than commercial absorber. • S 11 of the prototype is lower than −30 dB (4–18 GHz) at normal and oblique incidences. - Abstract: This paper presents a new electromagnetic absorbing material developed from carbon fibers loaded epoxy foam for an application in anechoic chamber. The composite was developed in order to replace the currently used pyramidal absorbers made of carbon particles loaded polyurethane foam. Epoxy-composites filled with different weight percentages (from 0 wt.% to 4 wt.%) and length (1 and 3 mm) of carbon fibers were achieved. After an optimization of the dispersion of carbon fibers in composite materials, the dielectric properties of the composites were measured using a coaxial-probe in the frequency range 4–18 GHz. Results have shown that the complex permittivity of the composites increases with the amount of charge and also with the length of the carbon fibers. Absorption performance of a prototype prepared with a low concentration (0.5 wt.%) of carbon fibers was measured in an anechoic chamber: it shows a mean gain of 10 dB compared to a commercial absorber.

Electromagnetic absorber composite made of carbon fibers loaded epoxy foam for anechoic chamber application

Energy Technology Data Exchange (ETDEWEB)

Méjean, Chloé; Pometcu, Laura [Institut d’Electronique et de Télécommunications de Rennes, 18 rue Henri Wallon, 22000 Saint-Brieuc (France); Benzerga, Ratiba, E-mail: ratiba.benzerga@univ-rennes1.fr [Institut d’Electronique et de Télécommunications de Rennes, 18 rue Henri Wallon, 22000 Saint-Brieuc (France); Sharaiha, Ala; Le Paven-Thivet, Claire; Badard, Mathieu [Institut d’Electronique et de Télécommunications de Rennes, 18 rue Henri Wallon, 22000 Saint-Brieuc (France); Pouliguen, Philippe [Département Recherche et Innovation Scientifique de la Direction Générale de l’Armement, 7-9 rue des Mathurins, 92221 Bagneux (France)

2017-06-15

Highlights: • Carbon fibers loaded epoxy foam composites are proposed as microwave absorbers. • Dielectric properties (ε′, tanδ) of composites increase with carbon fibers content and length. • S{sub 11} coefficient of a pyramidal prototype was characterized in anechoic chamber. • Epoxy prototype shows better absorption performance than commercial absorber. • S{sub 11} of the prototype is lower than −30 dB (4–18 GHz) at normal and oblique incidences. - Abstract: This paper presents a new electromagnetic absorbing material developed from carbon fibers loaded epoxy foam for an application in anechoic chamber. The composite was developed in order to replace the currently used pyramidal absorbers made of carbon particles loaded polyurethane foam. Epoxy-composites filled with different weight percentages (from 0 wt.% to 4 wt.%) and length (1 and 3 mm) of carbon fibers were achieved. After an optimization of the dispersion of carbon fibers in composite materials, the dielectric properties of the composites were measured using a coaxial-probe in the frequency range 4–18 GHz. Results have shown that the complex permittivity of the composites increases with the amount of charge and also with the length of the carbon fibers. Absorption performance of a prototype prepared with a low concentration (0.5 wt.%) of carbon fibers was measured in an anechoic chamber: it shows a mean gain of 10 dB compared to a commercial absorber.

STUDY ON HEAT DYNAMIC LOADING OF RUBBER

Directory of Open Access Journals (Sweden)

T. I. Igumenova

2015-01-01

Full Text Available A number of studies on heat buildup in tire rubber surface scan method samples using a thermal imaging camera. Investigated the exothermic chemical reaction mechanical destruction rubber when loading designs permanent cyclic stretching with deformation of the working zone 50%. Percentage of deformation of the working zone was chosen on the basis of the actual data on the stretch-compression zone "Rusk" tires, which is the maximum level difference of deformation during run-in. Experiment plan provided for periodic relaxation samples of at least 72 hours for more accurate simulation of operation process of structural products. Created and processed data on temperature changes in samples for bar and line profile for rubber compounds with the introduction of nanomodifiers (fulleren technical carbon in comparison with the control sample without him. The data obtained reflect the nature of heat depending on the composition of the compound. Identified common patterns of thermal nature of physico-chemical process mechanical destruction rubbers. For rubber with nanomodifikatorom there has been an increase in the temperature interval reaction from a minimum to a maximum 2 degrees that is also linked to the rise in the average temperature of the reaction on the histogram also at 2-3 degrees of deformation under the same conditions and the level of cyclic loading. However, the temperature in the control sample that is associated with the beginning of the formation of hardened rubber structures, economies of Mallinz-Petrikeev, occurs with delay twice compared with modified Fullerenes. Measurement of physic-mechanical indicators selected in the course of testing of samples showed the beginning of formation of structure with increased strength of samples in the sample temperature zone that corresponds to the thermal effect of èndotermičeskomu recombination reactions of macromolecules.

Synthesis and urea-loading of an eco-friendly superabsorbent composite based on mulberry branches

Directory of Open Access Journals (Sweden)

Xiying Liang

2013-02-01

Full Text Available Mulberry branch, consisting of bark and stalk, was used as raw skeleton material without any chemical pre-treatment to synthesize an eco-friendly mulberry branch-g-poly(acrylic acid-co-acrylamide (PMB/P(AA-co-AM superabsorbent composite. The synthesis conditions and properties of the PMB/P(AA-co-AM superabsorbent composite were investigated. The results showed that under the optimal synthesis conditions, the water absorbency of the prepared PMB/P(AA-co-AM reached 570.5 g/g in deionized water, 288.0 g/g in tap water, and 70.0 g/g in 0.9 wt% aqueous NaCl solution. The PMB/P(AA-co-AM composite also exhibited excellent water retention capacity as well as a rapid water absorbency rate. The urea loading percentage of the PMB/P(AA-co-AM composite was controlled by the concentration of aqueous urea solution. The release of urea from the loaded PMB/P(AA-co-AM composite in deionized water initially exhibited a high rate of release for 60 min, followed by a rapid decline. Meanwhile, the PMB/P(AA-co-AM superabsorbent composite with larger particle size achieved a better sustained release of urea.

A recombinant multi-antigen vaccine with broad protection potential against avian pathogenic Escherichia coli.

Directory of Open Access Journals (Sweden)

Angelica Van Goor

Full Text Available Chickens are a major source of protein worldwide, yet infectious diseases continue to threaten the poultry industry. Avian pathogenic Escherichia coli (APEC, a subgroup of extraintestinal pathogenic E. coli (ExPEC, causes colibacillosis in chickens resulting in economic loss because of treatment, condemnation of products, and death. In this study, we evaluated a recombinant antigens (rAg vaccine combining common ExPEC surface proteins EtsC, OmpA, OmpT, and TraT for broad protective potential against APEC infections in chickens. The specific objectives were to evaluate antibody (serum and cytokines (lymphoid organs responses to vaccination; in vitro bactericidal ability of serum and splenocytes against multiple APEC serotypes; and in vivo protection against APEC challenge in chickens. Groups of four-day old chickens (N = 10 were vaccinated twice (two-week interval subcutaneously with rAgs alone or in combination and CpG adjuvant or PBS (control. IgY antibody in the serum and mRNA expression of IL-1β, IL-6, IL-18, IFN-γ, IL-4, IFN-β, and IL-8 in bursa, spleen, and thymus were measured using ELISA and RT-qPCR, respectively. Serum and splenocytes were tested for their bactericidal ability in vitro against multiple APEC isolates. Vaccinated and non-vaccinated chickens were challenged with 108 CFU of APEC-O2 via air sac at 31 days post first vaccination. Vaccine protection was determined by the decrease of bacterial loads in blood and organs (lung, heart, spleen, and liver, as well as gross colibacillosis lesion scores in air sac, heart, and liver. Vaccination significantly (P < 0.05 elicited IgY against specific antigens, induced immune related mRNA expression in the spleen and bursa, reduced in vitro growth of multiple APEC serotypes, and decreased bacterial loads in the heart and spleen, and gross lesion scores of the air sac, heart and liver in chickens. The vaccine reported may be used to provide broad protection against APEC strains

Comparison of variations between percentage of body fat, body mass index and daily physical activity among young Japanese and Thai female students

Directory of Open Access Journals (Sweden)

Morinaka Tomoko

2012-08-01

Full Text Available Abstract Background In our series of investigations concerning the causes of seasonal change in fat accumulation in young university students, we could not find any contribution of seasonal variation in the ratio of carbohydrate and fat metabolism to that of body fat percentage in Japanese and Thai participants. After our previous study, we examined the effect of daily physical activity on body fat percentage to look for the major causes of seasonal change in fat accumulation in young university students. Findings In this study, we measured participants’ (young Japanese and Thai university students daily physical activity by a uniaxial accelerometer in addition to the measurements of body fat percentage and body mass index by a bioelectrical impedance meter. We found that there was significant and moderate negative correlation between body fat percentage and daily step counts among Japanese but not Thai participants. We observed significant, moderate and positive correlations between the percentage of body fat and body mass index among Japanese and Thai participants. Conclusions Daily physical activity plays an important role in the seasonal variation of body fat percentage of Japanese female students. Our present study also confirmed the importance of daily physical activity for controlling body mass index and for the prevention of obesity.

A case of Z/E-isomers elution order inversion caused by cosolvent percentage change in supercritical fluid chromatography.

Science.gov (United States)

Pokrovskiy, Oleg I; Ustinovich, Konstantin B; Usovich, Oleg I; Parenago, Olga O; Lunin, Valeriy V; Ovchinnikov, Denis V; Kosyakov, Dmitry S

2017-01-06

A case of elution order inversion caused by cosolvent percentage change in supercritical fluid chromatography was observed and investigated in some detail. Z- and E-isomers of phenylisobutylketone oxime experience an elution order reversal on most columns if the mobile phase consists of CO 2 and alcohol. At lower percentages of alcohol Z-oxime is retained less, somewhere at 2-5% coelution occurs and at larger cosolvent volume elution order reverses - Z-oxime is eluted later than E-oxime. We suppose inversion with CO 2 -ROH phases happens due to a shift in balance between two main interactions governing retention. At low ROH percentages stationary phase surface is only slightly covered by ROH molecules so oximes primarily interact with adsorption sites via hydrogen bond formation. Due to intramolecular sterical hindrance Z-oxime is less able to form hydrogen bonds and consequently is eluted first. At higher percentages alcohols occupy most of strong hydrogen bonding sites on silica surface thus leaving non-specific electrostatic interactions predominantly responsible for Z/E selectivity. Z-oxime has a much larger dipole moment than E-oxime and at these conditions it is eluted later. Additional experimental data with CO 2 -CH 3 CN, hexane-iPrOH and CHF 3 -ROH mobile phases supporting this explanation are presented. Copyright © 2016 Elsevier B.V. All rights reserved.

Impact of measurement uncertainty from experimental load distribution factors on bridge load rating

Science.gov (United States)

Gangone, Michael V.; Whelan, Matthew J.

2018-03-01

Load rating and testing of highway bridges is important in determining the capacity of the structure. Experimental load rating utilizes strain transducers placed at critical locations of the superstructure to measure normal strains. These strains are then used in computing diagnostic performance measures (neutral axis of bending, load distribution factor) and ultimately a load rating. However, it has been shown that experimentally obtained strain measurements contain uncertainties associated with the accuracy and precision of the sensor and sensing system. These uncertainties propagate through to the diagnostic indicators that in turn transmit into the load rating calculation. This paper will analyze the effect that measurement uncertainties have on the experimental load rating results of a 3 span multi-girder/stringer steel and concrete bridge. The focus of this paper will be limited to the uncertainty associated with the experimental distribution factor estimate. For the testing discussed, strain readings were gathered at the midspan of each span of both exterior girders and the center girder. Test vehicles of known weight were positioned at specified locations on each span to generate maximum strain response for each of the five girders. The strain uncertainties were used in conjunction with a propagation formula developed by the authors to determine the standard uncertainty in the distribution factor estimates. This distribution factor uncertainty is then introduced into the load rating computation to determine the possible range of the load rating. The results show the importance of understanding measurement uncertainty in experimental load testing.

Blinded by the load: attention, awareness and the role of perceptual load.

Science.gov (United States)

Lavie, Nilli; Beck, Diane M; Konstantinou, Nikos

2014-05-05

What is the relationship between attention and conscious awareness? Awareness sometimes appears to be restricted to the contents of focused attention, yet at other times irrelevant distractors will dominate awareness. This contradictory relationship has also been reflected in an abundance of discrepant research findings leading to an enduring controversy in cognitive psychology. Lavie's load theory of attention suggests that the puzzle can be solved by considering the role of perceptual load. Although distractors will intrude upon awareness in conditions of low load, awareness will be restricted to the content of focused attention when the attended information involves high perceptual load. Here, we review recent evidence for this proposal with an emphasis on the various subjective blindness phenomena, and their neural correlates, induced by conditions of high perceptual load. We also present novel findings that clarify the role of attention in the response to stimulus contrast. Overall, this article demonstrates a critical role for perceptual load across the spectrum of perceptual processes leading to awareness, from the very early sensory responses related to contrast detection to explicit recognition of semantic content.

New loci for body fat percentage reveal link between adiposity and cardiometabolic disease risk

DEFF Research Database (Denmark)

Lu, Yingchang; Day, Felix R; Gustafsson, Stefan

2016-01-01

To increase our understanding of the genetic basis of adiposity and its links to cardiometabolic disease risk, we conducted a genome-wide association meta-analysis of body fat percentage (BF%) in up to 100,716 individuals. Twelve loci reached genome-wide significance (P<5 × 10(-8)), of which eigh...

The remaining percentage of 32P after burning of sulphur tablet containing 32P

International Nuclear Information System (INIS)

Ke Weiqing

1991-01-01

Three types of sulphur tablet containing 32 P are made artificially. The remaining percentage of 32 P after burning of three types of sulphur tablets containing 32 P is 98.1 ± 1.3% for 1st and 2nd types and 97.2 ± 2.8% for 3rd type

Synthesis of Pure Hydroxyapatite (Ca10 (PO46 (OH2 by the Sol –Gel Method and the Doxycycline Loaded in Presence of Gelatin for the Application of Drug Delivery DOI 10.2412/mmse.89.93.112

Directory of Open Access Journals (Sweden)

B. Shalini

2017-06-01

Full Text Available Hydroxyapatite (HAp is the most widely accepted biomaterial for the repair and reconstruction of bone tissue defects. The current study is based on HAp was synthesized using sol – gel method. The drug was loaded in presence of gelatin with pure HAp. Precursors like calcium nitrate tetrahydrate and diammonium hydrogen orthophosphate were used and ammonia solution was added to maintain the pH value at 10.5 throughout the reaction. The synthesized HAp and drug loaded HAp with gelatin were characterized using PXRD, FTIR, SEM, Drug loading, drug release studies. Results show that the average crystallite size for prepared HAp and drug loaded HAp with polymer are ~ 30 to 300 nm respectively was calculated using PXRD and morphology of pure HAp and drug loaded HAp with polymer was found using SEM. Drug loading and release percentage was calculated. Keeping the above points in the present study was aimed to produce the biocompatibility and bioactivity of HAp.

Design loads, loading combinations and structural acceptance criteria for BWR containments in the United States

International Nuclear Information System (INIS)

Edwards, N.W.

1979-01-01

The definition of loads, loading combinations, and structural acceptance criteria used for the design and evaluation of BWR containments in the Unites States has become much more comprehensive over the past decade. The Mark I pressure suppression containment vessels were designed for a static design pressure, a design temperature, dead load and static equivalent earthquake. The current Mark III containments are being designed to accommodate many more loads such as safety relief valve discharge loads, and suppression pool hydrodynamic loadings associated with the steam condensation phenomena as well as pressure and temperature transients for a range of pipe break sizes. Consistent with the more comprehensive definition of loads and loading combinations, the ASME Code presently establishes structural acceptance criteria with different margins of safety by the definition of Service Level Assignments A, B, C and D. Acting in a responsible manner, United States utilities are currently evaluating and modifying existing containment vessels to account for the more detailed load definition and structural acceptance criteria. (orig.)

Doxorubicin-loaded QuadraSphere microspheres: plasma pharmacokinetics and intratumoral drug concentration in an animal model of liver cancer.

Science.gov (United States)

Lee, Kwang-Hun; Liapi, Eleni A; Cornell, Curt; Reb, Philippe; Buijs, Manon; Vossen, Josephina A; Ventura, Veronica Prieto; Geschwind, Jean-Francois H

2010-06-01

The purpose of this study was to evaluate, in vitro and in vivo, doxorubicin-loaded poly (vinyl alcohol-sodium acrylate) copolymer microspheres [QuadraSphere microspheres (QSMs)] for transcatheter arterial delivery in an animal model of liver cancer. Doxorubicin loading efficiency and release profile were first tested in vitro. In vivo, 15 rabbits, implanted with a Vx-2 tumor in the liver, were divided into three groups of five rabbits each, based on the time of euthanasia. Twenty-five milligrams of QSMs was diluted in 10 ml of a 10 mg/ml doxorubicin solution and 10 ml of nonionic contrast medium for a total volume of 20 ml. One milliliter of a drug-loaded QSM solution containing 5 mg of doxorubicin was injected into the tumor feeding artery. Plasma doxorubicin and doxorubicinol concentrations, and intratumoral and peritumoral doxorubicin tissue concentrations, were measured. Tumor specimens were pathologically evaluated to record tumor necrosis. As a control, one animal was blandly embolized with plain QSMs in each group. In vitro testing of QSM doxorubicin loadability and release over time showed 82-94% doxorubicin loadability within 2 h and 6% release within the first 6 h after loading, followed by a slow release pattern. In vivo, the doxorubicin plasma concentration declined at 40 min. The peak doxorubicin intratumoral concentration was observed at 3 days and remained detectable till the study's end point (7 days). Mean percentage tumor cell death in the doxorubicin QSM group was 90% at 7 days and 60% in the bland QSM embolization group. In conclusion, QSMs can be efficiently loaded with doxorubicin. Initial experiments with doxorubicin-loaded QSMs show a safe pharmacokinetic profile and effective tumor killing in an animal model of liver cancer.

Doxorubicin-Loaded QuadraSphere Microspheres: Plasma Pharmacokinetics and Intratumoral Drug Concentration in an Animal Model of Liver Cancer

International Nuclear Information System (INIS)

Lee, Kwang-Hun; Liapi, Eleni A.; Cornell, Curt; Reb, Philippe; Buijs, Manon; Vossen, Josephina A.; Ventura, Veronica Prieto; Geschwind, Jean-Francois H.

2010-01-01

The purpose of this study was to evaluate, in vitro and in vivo, doxorubicin-loaded poly (vinyl alcohol-sodium acrylate) copolymer microspheres [QuadraSphere microspheres (QSMs)] for transcatheter arterial delivery in an animal model of liver cancer. Doxorubicin loading efficiency and release profile were first tested in vitro. In vivo, 15 rabbits, implanted with a Vx-2 tumor in the liver, were divided into three groups of five rabbits each, based on the time of euthanasia. Twenty-five milligrams of QSMs was diluted in 10 ml of a 10 mg/ml doxorubicin solution and 10 ml of nonionic contrast medium for a total volume of 20 ml. One milliliter of a drug-loaded QSM solution containing 5 mg of doxorubicin was injected into the tumor feeding artery. Plasma doxorubicin and doxorubicinol concentrations, and intratumoral and peritumoral doxorubicin tissue concentrations, were measured. Tumor specimens were pathologically evaluated to record tumor necrosis. As a control, one animal was blandly embolized with plain QSMs in each group. In vitro testing of QSM doxorubicin loadability and release over time showed 82-94% doxorubicin loadability within 2 h and 6% release within the first 6 h after loading, followed by a slow release pattern. In vivo, the doxorubicin plasma concentration declined at 40 min. The peak doxorubicin intratumoral concentration was observed at 3 days and remained detectable till the study's end point (7 days). Mean percentage tumor cell death in the doxorubicin QSM group was 90% at 7 days and 60% in the bland QSM embolization group. In conclusion, QSMs can be efficiently loaded with doxorubicin. Initial experiments with doxorubicin-loaded QSMs show a safe pharmacokinetic profile and effective tumor killing in an animal model of liver cancer.

Carbohydrate-Loading Diet

Science.gov (United States)

... Grape juice (12 ounces) 55 225 Lunch Milk, chocolate, reduced fat (12 ounces) 45 285 4 slices ... usual during carbohydrate loading to get the same benefits as a man does. Despite carbohydrate loading, you ...

Efficacy Study of Metho-Chelated Organic Minerals preparation Feeding on Milk Production and Fat Percentage in dairy cows

Directory of Open Access Journals (Sweden)

Somkuwar A.P.1

2011-02-01

Full Text Available The objective of the study was to compare the effect of feeding different mineral based formulation on dairy cow production performance, namely milk yield and fat percentage. The trial was conducted with dairy cows across various stages of lactation (Early, Mid and Late stage with 30 cows per stage. The experimental treatments included: Bestmin Gold (Metho-chelated organic minerals, given 30 gms per day, Inorganic mineral preparation (Inorg. Mineral, @ 50 gms/day/ cow and control. The study lasted from 0 to 40 days. Milk yield and fat percentage of cows were measured individually on Days 0, 5, 10, 15, 20, 25, 30 and 40. The Bestmin Gold treated group (Metho-chelated organic minerals improved the milk yield, net gain in milk and the milk fat percentage of animals across the various stages of lactation as compared to in control and inorganic mineral treated group of animals. [Veterinary World 2011; 4(1.000: 19-21

7 CFR 929.250 - Marketable quantity and allotment percentage for the 2000-2001 crop year.

Science.gov (United States)

2010-01-01

... (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts... percentage if the total industry sales history increases due to established growers receiving additional sales history on acreage with four years sales or less. [65 FR 42615, July 11, 2000] ...

Spectral analysis of the electromyograph of the erector spinae muscle before and after a dynamic manual load-lifting test

Directory of Open Access Journals (Sweden)

A.C. Cardozo

2004-07-01

Full Text Available The aim of the present study was to assess the spectral behavior of the erector spinae muscle during isometric contractions performed before and after a dynamic manual load-lifting test carried out by the trunk in order to determine the capacity of muscle to perform this task. Nine healthy female students participated in the experiment. Their average age, height, and body mass (± SD were 20 ± 1 years, 1.6 ± 0.03 m, and 53 ± 4 kg, respectively. The development of muscle fatigue was assessed by spectral analysis (median frequency and root mean square with time. The test consisted of repeated bending movements from the trunk, starting from a 45º angle of flexion, with the application of approximately 15, 25 and 50% of maximum individual load, to the stand up position. The protocol used proved to be more reliable with loads exceeding 50% of the maximum for the identification of muscle fatigue by electromyography as a function of time. Most of the volunteers showed an increase in root mean square versus time on both the right (N = 7 and the left (N = 6 side, indicating a tendency to become fatigued. With respect to the changes in median frequency of the electromyographic signal, the loads used in this study had no significant effect on either the right or the left side of the erector spinae muscle at this frequency, suggesting that a higher amount and percentage of loads would produce more substantial results in the study of isotonic contractions.

Using saturation water percentage data to predict mechanical composition of soils

International Nuclear Information System (INIS)

Mbagwu, J.S.C.; Okafor, D.O.

1995-04-01

One hundred and sixty-six soil samples representing eleven textural classes and having wide variations in organic matter (OM) contents and other physico-chemical properties were collected from different locations in southeastern Nigeria to study the relationship between mechanical composition and saturation water percentage (SP). The objective was to develop a prediction model for silt + clay (SC) and clay (C) contents of these soils using the SP values. The magnitude of the correlation coefficients (r) between SC or C and SP was dependent on the amount of organic matter (OM) present in the soils. For soils with ≤ 1.00% OM, the correlation (r) between SC and SP was 0.9659 (p ≤ 0.001) and that between C and SP was 0.9539 (p ≤ 0.001). For soils with ≥ 2.00% OM, the 'r' values were generally low, varying between 0.5320 and 0.2665 for SC and 0.6008 and 0.3000 for C. The best-fit regression models for predicting SC and C were developed with soils having ≤ 1.00% OM. An independent data set from 25 soil samples collected from other parts of the study area was used to test the predictive ability of the best-fit models. These models predicted SC and C accurately in soils having between 0.28 and 1.10% OM, but poorly in soils having between 1.31 and 3.91% OM. These results show that the use of saturation water percentage to predict the mechanical composition of soils is most reliable for soils with low (≤ 1.00%) OM contents. (author). 18 refs, 2 figs, 5 tabs

Association between frequency of atrial and ventricular ectopic beats and biventricular pacing percentage and outcomes in patients with cardiac resynchronization therapy

DEFF Research Database (Denmark)

Ruwald, Martin H; Mittal, Suneet; Ruwald, Anne-Christine

2014-01-01

-defibrillator device with data available on biventricular pacing percentage and pre-implantation 24-h Holter recordings were included. Using logistic regression, we estimated the influence of ectopic beats on the percentage of biventricular pacing. Reverse remodeling was measured as reductions in atrial and left...

Lower percentage of CD8+ T cells in peripheral blood of patients with sporotrichosis.

Science.gov (United States)

Zhu, Mingji; Xu, Yaqin; An, Lin; Jiang, Jinlan; Zhang, Xu; Jiang, Rihua

2016-07-01

To characterize the peripheral immunity and immunity response of patients with sporotrichosis, in this study we determined the lymphocyte subsets in the peripheral blood of Chinese patients with sporotrichosis. In this retrospective study, peripheral blood was collected from 69 sporotrichosis patients (37, fixed cutaneous form; 32 lymphocutaneous) and 66 healthy controls. Lymphocyte subsets were analyzed using flow cytometry. Compared to controls, the percentage of CD8+ T cells was lower in sporotrichosis patients. The percentage of CD8+ T cells in peripheral blood tended to become lower with disease duration and disease severity, although the difference was not statistically significant for either acute, subacute and chronic patients or fixed cutaneous and lymphocutaneous patients. Our data indicate that the decrease of CD8+ T cells in peripheral blood of patients with sporotrichosis is associated with disease severity, although the difference was not statistically significant for either duration or clinical forms of the disease. Combining antifungal agents and immunomodulators in patients with long disease duration and lymphocutaneous may be more beneficial than antifungal monotherapy. Copyright © 2016. Published by Elsevier Inc.

Change in donor profile influenced the percentage of organs transplanted from multiple organ donors.

Science.gov (United States)

Meers, C; Van Raemdonck, D; Van Gelder, F; Van Hees, D; Desschans, B; De Roey, J; Vanhaecke, J; Pirenne, J

2009-03-01

We hypothesized that the change in donor profile over the years influenced the percentage of transplantations. We reviewed medical records for all multiple-organ donors (MODs) within our network. The percentage of transplanted organs was compared between 1991-1992 (A) and 2006-2007 (B). In period A, 156 potential MODs were identified compared with 278 in period B. Fifteen potential donors (10%) in period A and 114 (41%) in period B were rejected because they were medically not suitable (40% vs 75%) or there was no family consent (60% vs 25%). Of the remaining effective MODs (141 in period A and 164 in period B), mean (standard deviation = SD) age was 34 (5) years vs 49 (17) years (P organs transplanted in periods A vs B was kidneys, 97% vs 79%; livers, 64% vs 85%; hearts, 60% vs 26%; lungs, 7% vs 35%; and pancreas, 6% vs 13% (P organs (17%), mainly because of medical contraindications. The MOD profile changed to older age, fewer traumatic brain deaths, and longer ventilation time. We transplanted more livers, lungs, and pancreases but fewer kidneys and hearts.

Load power device and system for real-time execution of hierarchical load identification algorithms

Science.gov (United States)

Yang, Yi; Madane, Mayura Arun; Zambare, Prachi Suresh

2017-11-14

A load power device includes a power input; at least one power output for at least one load; and a plurality of sensors structured to sense voltage and current at the at least one power output. A processor is structured to provide real-time execution of: (a) a plurality of load identification algorithms, and (b) event detection and operating mode detection for the at least one load.

Effect of dietary protein level and length of fattening period on dressing percentage and carcass conformation in broiler chickens

OpenAIRE

Dosković, Vladimir; Bogosavljević-Bošković, Snežana; Škrbić, Zdenka; Đoković, Radojica; Rakonjac, Simeon; Petričević, Veselin

2017-01-01

This study analyses the effect of different protein levels in broiler feeds (supplemented with protease) and different lengths of fattening period on some parameters related to dressed carcass quality. Medium-growing Master Gris broiler chickens were used in a fattening trial lasting 63 days. At slaughter, dressing percentages and abdominal fat percentages were determined based on traditionally dressed carcass weights and abdominal fat weights of broilers at 49 and 63 days, and conformation i...

The influence of FRCs reinforcement on marginal adaptation of CAD/CAM composite resin endocrowns after simulated fatigue loading.

Science.gov (United States)

Rocca, Giovanni Tommaso; Saratti, Carlo Massimo; Poncet, Antoine; Feilzer, Albert J; Krejci, Ivo

2016-05-01

To evaluate the marginal adaptation of endodontically treated molars restored with CAD/CAM composite resin endocrowns either with or without reinforcement by fibre reinforced composites (FRCs), used in different configurations. 32 human endodontically treated molars were cut 2 mm over the CEJ. Two interproximal boxes were created with the margins located 1 mm below the CEJ (distal box) and 1 mm over the CEJ (mesial box). All specimens were divided in four groups (n = 8). The pulp chamber was filled with: group 1 (control), hybrid resin composite (G-aenial Posterior, GC); group 2, as group 1 but covered by 3 meshes of E-glass fibres (EverStick NET, Stick Tech); group 3, FRC resin (EverX Posterior, GC); group 4, as group 3 but covered by 3 meshes of E-glass fibres. The crowns of all teeth were restored with CAD/CAM composite resin endocrowns (LAVA Ultimate, 3M). All specimens were thermo-mechanically loaded in a computer-controlled chewing machine (600,000 cycles, 1.6 Hz, 49 N and simultaneously 1500 thermo-cycles, 60 s, 5-55 °C). Marginal analysis before and after the loading was carried out on epoxy replicas by SEM at 200× magnification. For all the groups, the percentage values of perfect marginal adaptation after loading were always significantly lower than before loading (p marginal adaptation before and after loading was not significantly different between the experimental groups (p > 0.05). Within the limitations of this in vitro study, the use of FRCs to reinforce the pulp chamber of devitalized molars restored with CAD/CAM composite resin restorations did not significantly influenced their marginal quality.

Investigating the influence of working memory capacity when driving behavior is combined with cognitive load: An LCT study of young novice drivers.

Science.gov (United States)

Ross, Veerle; Jongen, Ellen M M; Wang, Weixin; Brijs, Tom; Brijs, Kris; Ruiter, Robert A C; Wets, Geert

2014-01-01

Distracted driving has received increasing attention in the literature due to potential adverse safety outcomes. An often posed solution to alleviate distraction while driving is hands-free technology. Interference by distraction can occur however at the sensory input (e.g., visual) level, but also at the cognitive level where hands-free technology induces working memory (WM) load. Active maintenance of goal-directed behavior in the presence of distraction depends on WM capacity (i.e., Lavie's Load theory) which implies that people with higher WM capacity are less susceptible to distractor interference. This study investigated the interaction between verbal WM load and WM capacity on driving performance to determine whether individuals with higher WM capacity were less affected by verbal WM load, leading to a smaller deterioration of driving performance. Driving performance of 46 young novice drivers (17-25 years-old) was measured with the lane change task (LCT). Participants drove without and with verbal WM load of increasing complexity (auditory-verbal response N-back task). Both visuospatial and verbal WM capacity were investigated. Dependent measures were mean deviation in the lane change path (MDEV), lane change initiation (LCI) and percentage of correct lane changes (PCL). Driving experience was included as a covariate. Performance on each dependent measure deteriorated with increasing verbal WM load. Meanwhile, higher WM capacity related to better LCT performance. Finally, for LCI and PCL, participants with higher verbal WM capacity were influenced less by verbal WM load. These findings entail that completely eliminating distraction is necessary to minimize crash risks among young novice drivers. Copyright © 2013 Elsevier Ltd. All rights reserved.

A Simple Method to Measure the Thermal contraction Percentage of a Solid Between Room and Liquid Nitrogen Temperatures

International Nuclear Information System (INIS)

Grau Carles, A.; Grau Malonda, A.

2000-01-01

We described how to build a simple device for measuring, with a reasonable good accuracy, the thermal contraction of a flat sample between room and liquid nitrogen temperatures. The contraction percentage of the sample is determined by the dimensional comparison of two images taken through the bottom of a transparent quartz tray. Instead of a photo or video camera, a high-resolution flatbed scanner is utilized to avoid the correction of perspectives. The so-called Grueneisen approximation are applied to evaluate the contraction percentages for intermediate temperatures. (Author) 28 refs

Validity and reliability of the session-RPE method for quantifying training load in karate athletes.

Science.gov (United States)

Tabben, M; Tourny, C; Haddad, M; Chaabane, H; Chamari, K; Coquart, J B

2015-04-24

To test the construct validity and reliability of the session rating of perceived exertion (sRPE) method by examining the relationship between RPE and physiological parameters (heart rate: HR and blood lactate concentration: [La --] ) and the correlations between sRPE and two HR--based methods for quantifying internal training load (Banister's method and Edwards's method) during karate training camp. Eighteen elite karate athletes: ten men (age: 24.2 ± 2.3 y, body mass: 71.2 ± 9.0 kg, body fat: 8.2 ± 1.3% and height: 178 ± 7 cm) and eight women (age: 22.6 ± 1.2 y, body mass: 59.8 ± 8.4 kg, body fat: 20.2 ± 4.4%, height: 169 ± 4 cm) were included in the study. During training camp, subjects participated in eight karate--training sessions including three training modes (4 tactical--technical, 2 technical--development, and 2 randori training), during which RPE, HR, and [La -- ] were recorded. Significant correlations were found between RPE and physiological parameters (percentage of maximal HR: r = 0.75, 95% CI = 0.64--0.86; [La --] : r = 0.62, 95% CI = 0.49--0.75; P training load ( r = 0.65--0.95; P reliability of the same intensity across training sessions (Cronbach's α = 0.81, 95% CI = 0.61--0.92). This study demonstrates that the sRPE method is valid for quantifying internal training load and intensity in karate.

On load paths and load bearing topology from finite element analysis

International Nuclear Information System (INIS)

Kelly, D; Reidsema, C; Lee, M

2010-01-01

Load paths can be mapped from vector plots of 'pointing stress vectors'. They define a path along which a component of load remains constant as it traverses the solution domain. In this paper the theory for the paths is first defined. Properties of the plots that enable a designer to interpret the structural behavior from the contours are then identified. Because stress is a second order tensor defined on an orthogonal set of axes, the vector plots define separate paths for load transfer in each direction of the set of axes. An algorithm is therefore presented that combines the vectors to define a topology to carry the loads. The algorithm is shown to straighten the paths reducing bending moments and removing stress concentration. Application to a bolted joint, a racing car body and a yacht hull demonstrate the usefulness of the plots.

Body Fat Percentage Prediction Using Intelligent Hybrid Approaches

Directory of Open Access Journals (Sweden)

Yuehjen E. Shao

2014-01-01

Full Text Available Excess of body fat often leads to obesity. Obesity is typically associated with serious medical diseases, such as cancer, heart disease, and diabetes. Accordingly, knowing the body fat is an extremely important issue since it affects everyone’s health. Although there are several ways to measure the body fat percentage (BFP, the accurate methods are often associated with hassle and/or high costs. Traditional single-stage approaches may use certain body measurements or explanatory variables to predict the BFP. Diverging from existing approaches, this study proposes new intelligent hybrid approaches to obtain fewer explanatory variables, and the proposed forecasting models are able to effectively predict the BFP. The proposed hybrid models consist of multiple regression (MR, artificial neural network (ANN, multivariate adaptive regression splines (MARS, and support vector regression (SVR techniques. The first stage of the modeling includes the use of MR and MARS to obtain fewer but more important sets of explanatory variables. In the second stage, the remaining important variables are served as inputs for the other forecasting methods. A real dataset was used to demonstrate the development of the proposed hybrid models. The prediction results revealed that the proposed hybrid schemes outperformed the typical, single-stage forecasting models.

Construction of estimated flow- and load-duration curves for Kentucky using the Water Availability Tool for Environmental Resources (WATER)

Science.gov (United States)

Unthank, Michael D.; Newson, Jeremy K.; Williamson, Tanja N.; Nelson, Hugh L.

2012-01-01

Flow- and load-duration curves were constructed from the model outputs of the U.S. Geological Survey's Water Availability Tool for Environmental Resources (WATER) application for streams in Kentucky. The WATER application was designed to access multiple geospatial datasets to generate more than 60 years of statistically based streamflow data for Kentucky. The WATER application enables a user to graphically select a site on a stream and generate an estimated hydrograph and flow-duration curve for the watershed upstream of that point. The flow-duration curves are constructed by calculating the exceedance probability of the modeled daily streamflows. User-defined water-quality criteria and (or) sampling results can be loaded into the WATER application to construct load-duration curves that are based on the modeled streamflow results. Estimates of flow and streamflow statistics were derived from TOPographically Based Hydrological MODEL (TOPMODEL) simulations in the WATER application. A modified TOPMODEL code, SDP-TOPMODEL (Sinkhole Drainage Process-TOPMODEL) was used to simulate daily mean discharges over the period of record for 5 karst and 5 non-karst watersheds in Kentucky in order to verify the calibrated model. A statistical evaluation of the model's verification simulations show that calibration criteria, established by previous WATER application reports, were met thus insuring the model's ability to provide acceptably accurate estimates of discharge at gaged and ungaged sites throughout Kentucky. Flow-duration curves are constructed in the WATER application by calculating the exceedence probability of the modeled daily flow values. The flow-duration intervals are expressed as a percentage, with zero corresponding to the highest stream discharge in the streamflow record. Load-duration curves are constructed by applying the loading equation (Load = Flow*Water-quality criterion) at each flow interval.

Concentrated loads on concrete

DEFF Research Database (Denmark)

Lorenzen, Karen Grøndahl; Nielsen, Mogens Peter

1997-01-01

This report deals with concentrated loads on concrete.A new upper bound solution in the axisymmetrical case of a point load in the center of the end face of a cylinder is developed.Based on previous work dealing with failure mechanisms and upper bound solutions, new approximate formulas are devel......This report deals with concentrated loads on concrete.A new upper bound solution in the axisymmetrical case of a point load in the center of the end face of a cylinder is developed.Based on previous work dealing with failure mechanisms and upper bound solutions, new approximate formulas...

The effect of load-controlled bending load on the failure pressure of wall-thinned pipe elbows

International Nuclear Information System (INIS)

Kim, Jin Weon; Yoon, Min Soo; Park, Chi Yong

2013-01-01

Highlights: • We evaluated bending load effect on the failure pressure of wall-thinned pipe elbows. • Burst tests were conducted on real-scale elbow specimens with local wall thinning. • The tests were performed under combined pressure and load-controlled bending. • Load-controlled bending reduced the failure pressure of wall-thinned elbows. • Bending load effect was significant for opening-mode and intrados wall-thinning case. - Abstract: In this research, burst tests were conducted on real-scale elbow specimens, each with an artificial local wall-thinning defect, under combined internal pressure and constant in-plane bending load, as well as under simple internal pressure, to evaluate the effect of load-controlled bending load on the failure pressure of locally wall-thinned pipe elbows. Ninety-degree, 65A Schedule 80 elbows, with wall-thinning defects in the intrados and extrados, were used as specimens. The bending loads were in-plane opening- and closing-mode bending, applied in load-control mode. The results clearly indicated that a load-controlled in-plane bending load reduced the failure pressure of wall-thinned pipe elbows, in contrast to observations previously made under displacement-controlled bending conditions. The effect of the bending load was more significant for opening-mode than for closing-mode bending, regardless of the wall-thinning location in the elbow. Also, the effect was greater when the wall-thinning defect was located in the intrados region of the elbow, rather than the extrados region. Existing models that have been proposed to evaluate the failure of wall-thinned elbows under simple internal pressure conservatively predicted the failure pressure of elbows subjected to a combined internal pressure and load-controlled bending load

Usefulness of percentage enhancement washout value calculated on unenhanced, contrast-enhanced, and delayed enhanced CT in adrenal masses: adenoma versus metastasis

International Nuclear Information System (INIS)

Sohn, Kyung Myung; Lee, Sung Yong; Lee, Keun Ho

2003-01-01

To determine the usefulness of percentage enhancement washout value calculated on unenhanced, enhanced and delayed enhanced CT scans for the characterization of adrenal masses. Forty adrenal masses less than 5 cm in size were assessed using a protocol consisting of unenhanced CT, enhanced CT 60 seconds after intravenous administration of contrast material, and delayed enhanced CT at 10 minutes. The CT attenuation value of adrenal tumors was estimated on each scan, and percentage enhancement washout value was calculated as follows:[(attenuation value at enhanced CT-attenuation value at delayed CT)/ (attenuation value at enhanced CT-attenuation value at unenhanced CT)x100]. An adrenal mass was considered benign if its percentage enhancement washout value was at the threshold value, set to 60% and 50%, or higher. The accuracy of the procedure was determined by comparing its findings with the final clinical diagnosis. Twenty-nine massess were benign and 11 were malignant. The mean percentage enhancement washout value of the former was significantly higher than that of the latter (66.7% vs. 21.8%; p<0.01). All adenomas except one had a washout value of more than 50%. With a percentage washout threshold of 60%, 35 of 40 lesions were correctly characterized as benign or malignant [sensitivity 82.7% (24/29), specificity 100% (11/11), accuracy 87.5% (35/40)]; with a threshold of 50%, 39 of 40 lesions were correctly characterized [(sensitivity 96.5% (28/29), specificity 100% (11/11), accuracy 97.5% (39/40)]. Percentage enhancement washout values are useful for characterizing an adrenal mass as benign or malignant. For characterization, a threshold value of 50% was more accurate than one of 60%

Optimization of drug loading to improve physical stability of paclitaxel-loaded long-circulating liposomes.

Science.gov (United States)

Kannan, Vinayagam; Balabathula, Pavan; Divi, Murali K; Thoma, Laura A; Wood, George C

2015-01-01

The effect of formulation and process parameters on drug loading and physical stability of paclitaxel-loaded long-circulating liposomes was evaluated. The liposomes were prepared by hydration-extrusion method. The formulation parameters such as total lipid content, cholesterol content, saturated-unsaturated lipid ratio, drug-lipid ratio and process parameters such as extrusion pressure and number of extrusion cycles were studied and their impact on drug loading and physical stability was evaluated. A proportionate increase in drug loading was observed with increase in the total phospholipid content. Cholesterol content and saturated lipid content in the bilayer showed a negative influence on drug loading. The short-term stability evaluation of liposomes prepared with different drug-lipid ratios demonstrated that 1:60 as the optimum drug-lipid ratio to achieve a loading of 1-1.3 mg/mL without the risk of physical instability. The vesicle size decreased with an increase in the extrusion pressure and number of extrusion cycles, but no significant trends were observed for drug loading with changes in process pressure or number of cycles. The optimization of formulation and process parameters led to a physically stable formulation of paclitaxel-loaded long-circulating liposomes that maintain size, charge and integrity during storage.

Reduced design load basis for ultimate blade loads estimation in multidisciplinary design optimization frameworks

DEFF Research Database (Denmark)

Pavese, Christian; Tibaldi, Carlo; Larsen, Torben J.

2016-01-01

The aim is to provide a fast and reliable approach to estimate ultimate blade loads for a multidisciplinary design optimization (MDO) framework. For blade design purposes, the standards require a large amount of computationally expensive simulations, which cannot be efficiently run each cost...... function evaluation of an MDO process. This work describes a method that allows integrating the calculation of the blade load envelopes inside an MDO loop. Ultimate blade load envelopes are calculated for a baseline design and a design obtained after an iteration of an MDO. These envelopes are computed...... for a full standard design load basis (DLB) and a deterministic reduced DLB. Ultimate loads extracted from the two DLBs with the two blade designs each are compared and analyzed. Although the reduced DLB supplies ultimate loads of different magnitude, the shape of the estimated envelopes are similar...

Probabilistic model of bridge vehicle loads in port area based on in-situ load testing

Science.gov (United States)

Deng, Ming; Wang, Lei; Zhang, Jianren; Wang, Rei; Yan, Yanhong

2017-11-01

Vehicle load is an important factor affecting the safety and usability of bridges. An statistical analysis is carried out in this paper to investigate the vehicle load data of Tianjin Haibin highway in Tianjin port of China, which are collected by the Weigh-in- Motion (WIM) system. Following this, the effect of the vehicle load on test bridge is calculated, and then compared with the calculation result according to HL-93(AASHTO LRFD). Results show that the overall vehicle load follows a distribution with a weighted sum of four normal distributions. The maximum vehicle load during the design reference period follows a type I extremum distribution. The vehicle load effect also follows a weighted sum of four normal distributions, and the standard value of the vehicle load is recommended as 1.8 times that of the calculated value according to HL-93.

Load Balancing Scientific Applications

Energy Technology Data Exchange (ETDEWEB)

Pearce, Olga Tkachyshyn [Texas A & M Univ., College Station, TX (United States)

2014-12-01

The largest supercomputers have millions of independent processors, and concurrency levels are rapidly increasing. For ideal efficiency, developers of the simulations that run on these machines must ensure that computational work is evenly balanced among processors. Assigning work evenly is challenging because many large modern parallel codes simulate behavior of physical systems that evolve over time, and their workloads change over time. Furthermore, the cost of imbalanced load increases with scale because most large-scale scientific simulations today use a Single Program Multiple Data (SPMD) parallel programming model, and an increasing number of processors will wait for the slowest one at the synchronization points. To address load imbalance, many large-scale parallel applications use dynamic load balance algorithms to redistribute work evenly. The research objective of this dissertation is to develop methods to decide when and how to load balance the application, and to balance it effectively and affordably. We measure and evaluate the computational load of the application, and develop strategies to decide when and how to correct the imbalance. Depending on the simulation, a fast, local load balance algorithm may be suitable, or a more sophisticated and expensive algorithm may be required. We developed a model for comparison of load balance algorithms for a specific state of the simulation that enables the selection of a balancing algorithm that will minimize overall runtime.

Status of load management

Energy Technology Data Exchange (ETDEWEB)

Juchymenko, A

1983-08-01

A summary is presented of the status of load management, defined as any activity by an electric utility to affect the size and characteristics of its load. Load management is currently viewed by electric utilities as an important tool for marketing electricity in a competitive fuel situation. A major aim of the National Energy Program is to reduce Canada's dependence on oil by 1990 to 10% of the energy used by all markets. As a result, electricity may play a greater role in the supply of primary energy. Research in load management has been directed mostly towards the residential market, especially direct control of domestic hot water heaters and air conditioners. Studies conducted in Canada and the U.S. to determine user's receptiveness to direct control of loads and thermal energy storage systems indicate that these load management techniques are in most cases not acceptable to customers, who prefer voluntary reduction in demand. The potential exists in the industrial market to use load management to assist in electrifying many of the fossil fuel-fired processes at competitive energy prices. Some of the more important applications include an industrial heat pump to heat liquids to 120{degree}C, induction heating for melting and heat treating of metals, and mechanical vapor recompression equipment to produce proces steam. 21 refs., 2 figs., 2 tabs.

Strategies for Controlling Plug Loads. A Tool for Reducing Plug Loads in Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Torcellini, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bonnema, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sheppy, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pless, Shanti [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2015-09-01

Plug loads are often not considered as part of the energy savings measures in Commercial Buildings; however, they can account for up to 50% of the energy used in the building. These loads are numerous and often scattered throughout a building. Some of these loads are purchased by the owner and some designed into the building or the tenant finishes for a space. This document provides a strategy and a tool for minimizing these loads.

26 CFR 1.280F-3T - Limitations on recovery deductions and the investment tax credit when the business use percentage...

Science.gov (United States)

2010-04-01

... investment tax credit when the business use percentage of listed property is not greater than 50 percent... recovery deductions and the investment tax credit when the business use percentage of listed property is... limitations with respect to the amount allowable as an investment tax credit under section 46(a) and the...

High drug load, stable, manufacturable and bioavailable fenofibrate formulations in mesoporous silica: a comparison of spray drying versus solvent impregnation methods.

Science.gov (United States)

Hong, Shiqi; Shen, Shoucang; Tan, David Cheng Thiam; Ng, Wai Kiong; Liu, Xueming; Chia, Leonard S O; Irwan, Anastasia W; Tan, Reginald; Nowak, Steven A; Marsh, Kennan; Gokhale, Rajeev

2016-01-01

Encapsulation of drugs in mesoporous silica using co-spray drying process has been recently explored as potential industrial method. However, the impact of spray drying on manufacturability, physiochemical stability and bioavailability in relation to conventional drug load processes are yet to be fully investigated. Using a 2(3) factorial design, this study aims to investigate the effect of drug-loading process (co-spray drying and solvent impregnation), mesoporous silica pore size (SBA-15, 6.5 nm and MCM-41, 2.5 nm) and percentage drug load (30% w/w and 50% w/w) on material properties, crystallinity, physicochemical stability, release profiles and bioavailability of fenofibrate (FEN) loaded into mesoporous silica. From the scanning electronic microscopy (SEM) images, powder X-ray diffraction and Differential scanning calorimetry measurements, it is indicated that the co-spray drying process was able to load up to 50% (w/w) FEN in amorphous form onto the mesoporous silica as compared to the 30% (w/w) for solvent impregnation. The in vitro dissolution rate of the co-spray dried formulations was also significantly (p = 0.044) better than solvent impregnated formulations at the same drug loading. Six-month accelerated stability test at 40 °C/75 RH in open dish indicated excellent physical and chemical stability of formulations prepared by both methods. The amorphous state of FEN and the enhanced dissolution profiles were well preserved, and very low levels of degradation were detected after storage. The dog data for the three selected co-spray-dried formulations revealed multiple fold increment in FEN bioavailability compared to the reference crystalline FEN. These results validate the viability of co-spray-dried mesoporous silica formulations with high amorphous drug load as potential drug delivery systems for poorly water soluble drugs.

The percentage of migration as indicator of femoral head position

International Nuclear Information System (INIS)

Ekloef, O.; Ringertz, H.; Samuelsson, L.; Karolinska Sjukhuset, Stockholm; Karolinska Sjukhuset, Stockholm

1988-01-01

In childhood subluxation of one or both hips may develop rather insidiously. For lack of generally accepted objective methods of assessment, ambiguous interpretations of findings in serial examinations are common. Many subluxations are overlooked during the early stages. In order to overcome such disadvantages, determination of the percentage of migration seems to be a reasonably easy and reliable technique facilitating evaluation of impending dislocation. This investigation was carried out in order to estabilsh norms applicable to patients in the pediatric age interval. The 98th percentile of migration increases with age from 16% in patients < 4 years of age to 24% in patients ≥ 12 years. Higher figures represent subluxation. If the migration exceeds 80% a manifest luxation is present. A difference in migration between the two hips larger than 12% indicates abnormality calling for clinical and radiologic follow-up. (orig.)

Investigation of bioactivity, biocompatibility and thermal behavior of sol–gel silica glass containing a high PEG percentage

Energy Technology Data Exchange (ETDEWEB)

Catauro, M., E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Renella, R.A.; Papale, F. [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Vecchio Ciprioti, S. [Department of Basic and Applied Science for Engineering, Sapienza University of Rome, Via del Castro Laurenziano 7, Building RM017, I-00161 Rome (Italy)

2016-04-01

SiO{sub 2}/PEG organic–inorganic hybrid materials, which contain 60 or 70 weight percentage of PEG, were synthesized by the sol–gel technique. The materials were characterized and subjected to various tests to assess their application in the biomedical field. The evaluation of their morphology by scanning electron microscopy (SEM) confirms the homogeneity of the samples on the nanometer scale. Fourier transform infrared spectroscopy (FT-IR) indicated that the two components of the hybrids (SiO{sub 2} and PEG) are linked by hydrogen bonds. This feature makes them class I hybrids. Simultaneous thermogravimetry/differential thermal analysis (TG/DTA) was used to investigate their thermal behavior and to establish the best temperatures for their pre-treatment. The fundamental properties that a material must have to be used in the biomedical field are biocompatibility and bioactivity. The formation of a hydroxyapatite layer was observed on the hybrid surface by SEM/EDX and FTIR after soaking in simulated body fluid. This indicates that the materials are able to bond to bone tissue. Moreover, the biocompatibility of SiO{sub 2}/PEG hybrids was assessed by performing WST-8 cytotoxicity tests on fibroblast cell NIH 3T3 after 24 h of exposure. The cytotoxicity tests highlight that the cell viability is affected by the polymer percentage. The results showed that the synthesized materials were bioactive and biocompatible. Therefore, the results obtained are encouraging for the use of the obtained hybrids in dental or orthopedic applications. - Highlights: • SiO{sub 2}/PEG hybrid biomaterials synthesized by sol–gel method at high PEG percentage • Chemical, thermal and morphological characterization of hybrid materials • Biological characterizations with WST-8 cytotoxicity tests • Bioactivity characterizations of hybrid materials with high PEG percentage.

Cognitive load measurement as a means to advance cognitive load theory

NARCIS (Netherlands)

Paas, F.; Tuovinen, J.E.; Tabbers, H.; van Gerven, P.W.M.

2003-01-01

This paper discusses cognitive load measurement techniques with regard to their contribution to cognitive load theory (CLT). CLT is concerned with the design of instructional methods that efficiently use people's limited cognitive processing capacity to apply acquired knowledge and skills to new

Evaluation of self-assembled HCPT-loaded PEG-b-PLA nanoparticles by comparing with HCPT-loaded PLA nanoparticles.

Science.gov (United States)

Yang, Xiangrui; Wu, Shichao; Wang, Yange; Li, Yang; Chang, Di; Luo, Yin; Ye, Shefang; Hou, Zhenqing

2014-12-01

We present a dialysis technique to prepare the 10-hydroxycamptothecin (HCPT)-loaded nanoparticles (NPs) using methoxypolyethylene glycol-poly(D,L-lactide) (PEG-b-PLA) and PLA, respectively. Both HCPT-loaded PEG-b-PLA NPs and HCPT-loaded PLA NPs were characterized by differential scanning calorimetry (DSC), dynamic light scattering (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). The results showed that the HCPT-loaded PEG-b-PLA NPs and HCPT-loaded PLA NPs presented a hydrodynamic particle size of 120.1 and 226.8 nm, with a polydispersity index of 0.057 and 0.207, a zeta potential of -31.2 and -45.7 mV, drug encapsulation efficiency of 44.52% and 44.94%, and drug-loaded content of 7.42% and 7.49%, respectively. The HCPT-loaded PEG-b-PLA NPs presented faster drug release rate compared to the HCPT-loaded PLA NPs. The HCPT-loaded PEG-b-PLA NPs presented higher cytotoxicity than the HCPT-loaded PLA NPs. These results suggested that the HCPT-loaded PEG-b-PLA NPs presented better characteristics for drug delivery compared to HCPT-loaded PLA NPs.

Beam loading

OpenAIRE

Boussard, Daniel

1987-01-01

We begin by giving a description of the radio-frequency generator-cavity-beam coupled system in terms of basic quantities. Taking beam loading and cavity detuning into account, expressions for the cavity impedance as seen by the generator and as seen by the beam are derived. Subsequently methods of beam-loading compensation by cavity detuning, radio-frequency feedback and feedforward are described. Examples of digital radio-frequency phase and amplitude control for the special case of superco...

Modelling of optimal training load patterns during the 11 weeks preceding major competition in elite swimmers.

Science.gov (United States)

Hellard, Philippe; Scordia, Charlotte; Avalos, Marta; Mujika, Inigo; Pyne, David B

2017-10-01

Periodization of swim training in the final training phases prior to competition and its effect on performance have been poorly described. We modeled the relationships between the final 11 weeks of training and competition performance in 138 elite sprint, middle-distance, and long-distance swimmers over 20 competitive seasons. Total training load (TTL), strength training (ST), and low- to medium-intensity and high-intensity training variables were monitored. Training loads were scaled as a percentage of the maximal volume measured at each intensity level. Four training periods (meso-cycles) were defined: the taper (weeks 1 to 2 before competition), short-term (weeks 3 to 5), medium-term (weeks 6 to 8), and long-term (weeks 9 to 11). Mixed-effects models were used to analyze the association between training loads in each training meso-cycle and end-of-season major competition performance. For sprinters, a 10% increase between ∼20% and 70% of the TTL in medium- and long-term meso-cycles was associated with 0.07 s and 0.20 s faster performance in the 50 m and 100 m events, respectively (p training yielded faster competition performance (e.g., a 10% increase in TTL was associated with improvements of 0.1-1.0 s in 200 m events and 0.3-1.6 s in 400 m freestyle, p < 0.01). For sprinters, a 60%-70% maximal ST load 6-8 weeks before competition induced the largest positive effects on performance (p < 0.01). An increase in TTL during the medium- and long-term preparation (6-11 weeks to competition) was associated with improved performance. Periodization plans should be adapted to the specialty of swimmers.

Use of open-cell resilient polyurethane foam loaded with crown ether for the preconcentration of uranium from aqueous solutions

International Nuclear Information System (INIS)

Abou-Mesalam, M.M.; El-Naggar, I.M.; Abdel-Hai, M.S.; El-Shahawi, M.S.

2003-01-01

The preconcentration of uranium from aqueous solutions on open-cell resilient polyurethane foams (PUF) impregnated with crown ether as an organic extractant in different conditions was investigated. The data showed that 50 minutes is a sufficient time to attain equilibrium with a maximum extraction percentage for uranium ion on polyurethane foams loaded with crown ether. Also the extraction percentage of uranium is increased markedly with increasing the pH values up to pH ∼ 6 and displayed the lowest extraction at 8 > pH > 6. The different isotherms of uranium sorption have shown that the sorption followed a Freundlich isotherm. Column studies have been carried out in order to extend these studies to the plant scale. From the data of column sorption and breakthrough curves, the height equivalent of theoretical plates (HETP), and breakthrough capacity which affect the efficiency of the column have been calculated and found to be 1.03 mm/plate, 64 ± 5 and 58.3 mg uranium/gram polyurethane foam impregnated with crown ether, respectively. (author)

The effects of varying resistance-training loads on intermediate- and high-velocity-specific adaptations.

Science.gov (United States)

Jones, K; Bishop, P; Hunter, G; Fleisig, G

2001-08-01

The purpose of this study was to compare changes in velocity-specific adaptations in moderately resistance-trained athletes who trained with either low or high resistances. The study used tests of sport-specific skills across an intermediate- to high-velocity spectrum. Thirty NCAA Division I baseball players were randomly assigned to either a low-resistance (40-60% 1 repetition maximum [1RM]) training group or a high-resistance (70-90% 1RM) training group. Both of the training groups intended to maximallv accelerate each repetition during the concentric phase (IMCA). The 10 weeks of training consisted of 4 training sessions a week using basic core exercises. Peak force, velocity, and power were evaluated during set angle and depth jumps as well as weighted jumps using 30 and 50% 1RM. Squat 1RMs were also tested. Although no interactions for any of the jump tests were found, trends supported the hypothesis of velocity-specific training. Percentage gains suggest that the combined use of heavier training loads (70-90% 1RM) and IMCA tend to increase peak force in the lower-body leg and hip extensors. Trends also show that the combined use of lighter training loads (40-60% 1RM) and IMCA tend to increase peak power and peak velocity in the lower-body leg and hip extensors. The high-resistance group improved squats more than the low-resistance group (p training loads and IMCA to increase 1RM strength in the lower bodies of resistance-trained athletes.

Comparison the percentage of detection of periarthritis in patients with rheumatoid arthritis using clinical examination or ultrasound methods.

Science.gov (United States)

Karimzadeh, Hadi; Seyedbonakdar, Zahra; Mousavi, Maryam; Karami, Mehdi

2016-01-01

This study aimed to compare the percentage of detection of periarthritis in patients with rheumatoid arthritis using clinical examination and ultrasound methods. This study is a cross-sectional study which was conducted in Al-Zahra Hospital (Isfahan, Iran) during 2014-2015. In our study, ninety patients were selected based on the American College of Rheumatology 2010 criteria. All patients were examined by a rheumatologist to find the existence of effusion, and the data were filled in the checklist. The ultrasonography for detecting effusion in periarticular structures was done by an expert radiologist with two methods, including high-resolution ultrasonography and power Doppler. The percentage of effusion existence found by physical examination was compared by sonography, and the Chi-square and t -tests were used for data analysis. The percentage of effusion found in areas with physical examination by rheumatologist was lower than the frequency distribution of effusions found by sonography (8.3% VS 14.2%) ( P tendinitis (10 cases), wrist tendonitis (13 cases), olecranon bursitis (9 cases), golfers elbow (4 cases), tennis elbow (4 cases), trochanteric bursitis (6 cases), anserine bursitis (6 cases), prepatellar bursitis (11 cases), and ankle tendonitis (7 cases). Tenderness on physical examination was found in 15% of the cases, and the evidence of periarthritis was found in 21/7% through sonography ( P < 0.001) and 34% through Doppler sonography ( P < 0.001). The percentage of periarthritis detection by ultrasonography and power Doppler sonography was higher than clinical examination. Hence, the ultrasonography is more accurate than physical examination.

Trace metals, melanin-based pigmentation and their interaction influence immune parameters in feral pigeons (Columba livia).

Science.gov (United States)

Chatelain, M; Gasparini, J; Frantz, A

2016-04-01

Understanding the effects of trace metals emitted by anthropogenic activities on wildlife is of great concern in urban ecology; yet, information on how they affect individuals, populations, communities and ecosystems remains scarce. In particular, trace metals may impact survival by altering the immune system response to parasites. Plumage melanin is assumed to influence the effects of trace metals on immunity owing to its ability to bind metal ions in feathers and its synthesis being coded by a pleiotropic gene. We thus hypothesized that trace metal exposure would interact with plumage colouration in shaping immune response. We experimentally investigated the interactive effect between exposure to an environmentally relevant range of zinc and/or lead and melanin-based plumage colouration on components of the immune system in feral pigeons (Columba livia). We found that zinc increased anti-keyhole limpet hemocyanin (KLH) IgY primary response maintenance, buffered the negative effect of lead on anti-KLH IgY secondary response maintenance and tended to increase T-cell mediated phytohaemagglutinin (PHA) skin response. Lead decreased the peak of the anti-KLH IgY secondary response. In addition, pheomelanic pigeons exhibited a higher secondary anti-KLH IgY response than did eumelanic ones. Finally, T-cell mediated PHA skin response decreased with increasing plumage eumelanin level of birds exposed to lead. Neither treatments nor plumage colouration correlated with endoparasite intensity. Overall, our study points out the effects of trace metals on some parameters of birds' immunity, independently from other confounding urbanization factors, and underlines the need to investigate their impacts on other life history traits and their consequences in the ecology and evolution of host-parasite interactions.

Outer membrane vesicles of Gallibacterium anatis induce protective immunity in egg-laying hens.

Science.gov (United States)

Pors, Susanne E; Pedersen, Ida J; Skjerning, Ragnhild Bager; Thøfner, Ida C N; Persson, Gry; Bojesen, Anders M

2016-11-15

Gallibacterium anatis causes infections in the reproductive tract of egg-laying hens and induce increased mortality and decreased egg production. New prophylactic measures are needed in order to improve animal welfare and production efficiency. Bacterial outer membrane vesicles (OMVs) have previously shown promising results in protection against infections and we hypothesized that OMVs could serve as an immunogen to protect egg-laying hens against G. anatis. To investigate the immunogenic potential of G. anatis OMVs, two in vivo studies in egg-laying hens were made. The trials assessedthe degree of protection provided by immunization with G. anatis OMV against challenge and the IgY responses in serum after immunization and challenge, respectively. A total of 64 egg-laying hens were included in the trials. OMVs for immunization were produced and purified from a high-producing G. anatis ΔtolR mutant. Challenge was done with G. anatis 12656-12 and evaluated by scoring lesions and bacterial re-isolation rates from peritoneum. Finally, levels of OMV-specific IgY in sera were assayed by ELISA. Immunization with OMVs decreased the lesions scores significantly, while the bacterial re-isolation remained unchanged. Furthermore, a high OMV-specific IgY response was induced by immunization and subsequent challenge of the hens. The results strongly indicate that immunization with G. anatis OMVs provides significant protection against G. anatis challenge and induces specific antibody responses with high titers of OMV-specific IgY in serum. The results therefore show great promise for OMV based vaccines aiming at providing protecting against G. anatis in egg-laying hens. Copyright © 2016 Elsevier B.V. All rights reserved.

Load regulating expansion fixture

International Nuclear Information System (INIS)