Hydrogen production by reforming of hydrocarbons and alcohols in a dielectric barrier discharge

Energy Technology Data Exchange (ETDEWEB)

Sarmiento, Belen; Brey, J. Javier; Viera, Inmaculada G. [Hynergreen Technologies, S.A. Avda. de la Buhaira, 2. 41018 Sevilla (Spain); Gonzalez-Elipe, Agustin R.; Cotrino, Jose; Rico, Victor J. [Instituto de Ciencia de los Materiales de Sevilla (CSIC-University Sevilla), Avda. Americo Vespucio, 49, 41092 Sevilla (Spain)

2007-06-10

This work reports about the use of plasmas to obtain hydrogen by reforming of hydrocarbons or alcohols in mixtures with CO{sub 2} or H{sub 2}O. The plasma is activated in a dielectric barrier discharge (DBD) reactor working at atmospheric pressure and low temperatures (i.e., about 100 C). The reactor presents a great versatility in operation and a low manufacturing cost. Results are presented for the reforming of methane, methanol and ethanol. Methane transforms up to a 70% into CO and H{sub 2} without formation of any kind of superior hydrocarbon. For the two alcohols 100% conversion into the same products is found for flows much higher than in the case of methane. The work reports a description of the reactor and the operational conditions of the power supply enabling the ignition of the plasma and its steady state operation. (author)

Optimization of process parameter and reformer configuration for hydrogen production from steam reforming of heavy hydrocarbons. Paper no. IGEC-1-079

International Nuclear Information System (INIS)

Chen, Z.; Elnashaie, S.E.H.

2005-01-01

The present optimization investigation is classified into reforming configuration optimization in one hand and parameter optimization of each configuration on the other hand. Heptane is used as a model component for heavy hydrocarbons. The proposed novel reforming process is basically a Circulating Fluidized-Bed Membrane Reformer (CFBMR) with continuous catalyst regeneration and gas-solid separation. Composite hydrogen selective membranes are used for removing the product hydrogen from the reacting gas mixture and therefore driving the reversible reactions beyond their thermodynamic equilibriums. Dense perovskite oxygen selective membranes are also used to introduce oxygen for the exothermic oxidation of hydrocarbons and carbon. Four configurations are investigated, two of them are with the catalyst regeneration before the gas-solid separation and the other two are with the catalyst regeneration after the gas-solid separation. The optimization of the performance of each configuration is carried out for a number of design and operating parameters as optimization parameters and under both non-autothermal and autothermal reforming conditions. Results show that the autothermal operation with direct contact between cold feeds (water and heptane) and hot circulating catalyst can be the best configuration for efficient hydrogen production with minimum energy consumption. The maximum net hydrogen yield is 16.732 moles of hydrogen per mole of heptane fed, which is 76.05% of the maximum theoretical hydrogen yield of 22. (author)

Modification of Catalysts for Steam Reforming of Fluid Hydrocarbons. Research of Gas-Dynamic Duct Cooling Using Planar and Framework Catalysts (CD-ROM)

National Research Council Canada - National Science Library

Kuranov, Alexander L

2005-01-01

.... One way of fuel conversion is the catalytic steam reforming of hydrocarbon. This reaction has a large heat capacity and gives maximum quantity of molecular hydrogen among known reactions of hydrocarbons...

Reforming options for hydrogen production from fossil fuels for PEM fuel cells

Energy Technology Data Exchange (ETDEWEB)

Ersoz, Atilla; Olgun, Hayati [TUBITAK Marmara Research Center, Institute of Energy, Gebze, 41470 Kocaeli (Turkey); Ozdogan, Sibel [Marmara University Faculty of Engineering, Goztepe, 81040 Istanbul (Turkey)

2006-03-09

PEM fuel cell systems are considered as a sustainable option for the future transport sector in the future. There is great interest in converting current hydrocarbon based transportation fuels into hydrogen rich gases acceptable by PEM fuel cells on-board of vehicles. In this paper, we compare the results of our simulation studies for 100kW PEM fuel cell systems utilizing three different major reforming technologies, namely steam reforming (SREF), partial oxidation (POX) and autothermal reforming (ATR). Natural gas, gasoline and diesel are the selected hydrocarbon fuels. It is desired to investigate the effect of the selected fuel reforming options on the overall fuel cell system efficiency, which depends on the fuel processing, PEM fuel cell and auxiliary system efficiencies. The Aspen-HYSYS 3.1 code has been used for simulation purposes. Process parameters of fuel preparation steps have been determined considering the limitations set by the catalysts and hydrocarbons involved. Results indicate that fuel properties, fuel processing system and its operation parameters, and PEM fuel cell characteristics all affect the overall system efficiencies. Steam reforming appears as the most efficient fuel preparation option for all investigated fuels. Natural gas with steam reforming shows the highest fuel cell system efficiency. Good heat integration within the fuel cell system is absolutely necessary to achieve acceptable overall system efficiencies. (author)

Reforming options for hydrogen production from fossil fuels for PEM fuel cells

Science.gov (United States)

Ersoz, Atilla; Olgun, Hayati; Ozdogan, Sibel

PEM fuel cell systems are considered as a sustainable option for the future transport sector in the future. There is great interest in converting current hydrocarbon based transportation fuels into hydrogen rich gases acceptable by PEM fuel cells on-board of vehicles. In this paper, we compare the results of our simulation studies for 100 kW PEM fuel cell systems utilizing three different major reforming technologies, namely steam reforming (SREF), partial oxidation (POX) and autothermal reforming (ATR). Natural gas, gasoline and diesel are the selected hydrocarbon fuels. It is desired to investigate the effect of the selected fuel reforming options on the overall fuel cell system efficiency, which depends on the fuel processing, PEM fuel cell and auxiliary system efficiencies. The Aspen-HYSYS 3.1 code has been used for simulation purposes. Process parameters of fuel preparation steps have been determined considering the limitations set by the catalysts and hydrocarbons involved. Results indicate that fuel properties, fuel processing system and its operation parameters, and PEM fuel cell characteristics all affect the overall system efficiencies. Steam reforming appears as the most efficient fuel preparation option for all investigated fuels. Natural gas with steam reforming shows the highest fuel cell system efficiency. Good heat integration within the fuel cell system is absolutely necessary to achieve acceptable overall system efficiencies.

Process for manufacture of a catalyst suitable for the steam reforming of hydrocarbons and for obtaining methane

Energy Technology Data Exchange (ETDEWEB)

Golebiowski, A.; Romotowski, T.; Hennel, W.; Wroblewska-Wroblewska, T.; Polanski, A.; Janecki, Z.; Paluch-Paluch, S.

1982-07-29

The invention concerns a process for the manufacture of a catalyst suitable for the steam reforming of hydrocarbons or for obtaining methane, by the deposition of the catalytic components on a metal carrier with a large surface area, particularly a process for the manufacture of a solid nickel catalyst, which is suitable for the steam reforming of hydrocarbons, particularly of methane. The following steps of the process are carried out: producing a highly porous layer of spongy metal from Ni powder on the side of a metal wall away from a heat medium, which separates the reaction mixture from the heat medium, then separate application of a non-reducing oxide (Al/sub 2/O/sub 3/) and a reducing oxide (nickel oxide) on the spongy metal by soaking with metal salt solution and then roasting in the temperature range of 400 to 1200/sup 0/C.

Microwave plasmas generated in bubbles immersed in liquids for hydrocarbons reforming

International Nuclear Information System (INIS)

Levko, Dmitry; Sharma, Ashish; Raja, Laxminarayan L

2016-01-01

We present a computational modeling study of microwave plasma generated in cluster of atmospheric-pressure argon bubbles immersed in a liquid. We demonstrate that the use of microwaves allows the generation of a dense chemically active non-equilibrium plasma along the gas–liquid interface. Also, microwaves allow generation of overdense plasma in all the bubbles considered in the cluster which is possible because the collisional skin depth of the wave exceeds the bubble dimension. These features of microwave plasma generation in bubbles immersed in liquids are highly desirable for the large-scale liquid hydrocarbon reforming technologies. (letter)

Method for the conversion of hydrocarbon charges

Energy Technology Data Exchange (ETDEWEB)

Whittam, T V

1976-11-11

The basis of the invention is the application of defined zeolites as catalysts to hydrocarbon conversion processes such as reformation, isomerization, dehydrocyclization, and cracking. By charging the zeolite carrier masses with 0.001 to 5% metal of the 8th group of the periodic system, preferably noble metals, a wide region of applications for the catalysts is achieved. A method for the isomerization of an alkyl benzene (or mixture of alkyl benzenes) in the liquid or gas phase under suitable temperature, pressure and flow-rate conditions, as well as in the presence of a cyclic hydrocarbon, is described as preferential model form of the invention; furthermore, a method for the reformation of a hydrocarbon fraction boiling in the gasoline or benzene boiling region and a method for the hydrocracking of hydrocarbon charge (e.g. naphtha, kerosine, gas oils) are given. Types of performance of the methods are explained using various examples.

Steam reforming of fuel to hydrogen in fuel cells

Science.gov (United States)

Fraioli, Anthony V.; Young, John E.

1984-01-01

A fuel cell capable of utilizing a hydrocarbon such as methane as fuel and having an internal dual catalyst system within the anode zone, the dual catalyst system including an anode catalyst supporting and in heat conducting relationship with a reforming catalyst with heat for the reforming reaction being supplied by the reaction at the anode catalyst.

Hydrogen generation from biogenic and fossil fuels by autothermal reforming

Science.gov (United States)

Rampe, Thomas; Heinzel, Angelika; Vogel, Bernhard

Hydrogen generation for fuel cell systems by reforming technologies from various fuels is one of the main fields of investigation of the Fraunhofer ISE. Suitable fuels are, on the one hand, gaseous hydrocarbons like methane, propane but also, on the other hand, liquid hydrocarbons like gasoline and alcohols, e.g., ethanol as biogenic fuel. The goal is to develop compact systems for generation of hydrogen from fuel being suitable for small-scale membrane fuel cells. The most recent work is related to reforming according to the autothermal principle — fuel, air and steam is supplied to the reactor. Possible applications of such small-scale autothermal reformers are mobile systems and also miniature fuel cell as co-generation plant for decentralised electricity and heat generation. For small stand-alone systems without a connection to the natural gas grid liquid gas, a mixture of propane and butane is an appropriate fuel.

Hydrocarbon fuel processing of micro solid oxide fuel cell systems[Dissertation 17455

Energy Technology Data Exchange (ETDEWEB)

Stutz, M. J.

2007-07-01

The scope of this thesis is the numerical and experimental investigation of the fuel processing of a micro solid oxide fuel cell (SOFC) running on hydrocarbon fuel. The goal is to enhance the overall system efficiency by optimization of the reforming process in the steady state and the improvement of the start-up process. Micro SOFC are a potential alternative to the currently used batteries in portable devices. Liquid butane in a cartridge could be the energy source. This dissertation is focused on the fuel processing of the system, namely the reforming and post-combusting processes. The reformer converts the hydrocarbon fuel to a hydrogen rich gas that can be utilized by the SOFC. The post-combustor depletes the toxic and/or explosive gases before leaving the exhaust. Chapter One presents a short introduction to the field of hydrocarbon fuel processing in micro solid oxide fuel cell systems, the next three chapters deal with computational modeling of the transport phenomena inside a micro-reformer, which leads to a better understanding of the chemistry and the physics therein, hence progress in the design and operation parameters. The experimental part (i.e. Chapter Five) of this thesis focuses on the feasibility of a novel hybrid start-up method of a fuel cell system that employs existing components as an additional heat source. In Chapter Two the effect of wall heat conduction on the syngas (hydrogen and carbon monoxide) production of a micro-reformer, representing micro-fabricated channels or monoliths, is investigated. Methane is used as a model hydrocarbon fuel since its heterogeneous reaction path on rhodium is known and validated. The simulations demonstrate that the axial wall conduction strongly influences the performance of the micro-reformer and should not be neglected without a careful a priori investigation of its impact. Methane conversion and hydrogen yield are strongly dependent of the wall inner surface temperature, which is influenced by the

Coke-free dry reforming of model diesel fuel by a pulsed spark plasma at low temperatures using an exhaust gas recirculation (EGR) system

Energy Technology Data Exchange (ETDEWEB)

Sekine, Yasushi; Furukawa, Naotsugu; Matsukata, Masahiko; Kikuchi, Eiichi, E-mail: ysekine@waseda.jp [Department of Applied Chemistry, Waseda University, 65-301, Okubo, Shinjuku, Tokyo 169-8555 (Japan)

2011-07-13

Dry reforming of diesel fuel, an endothermic reaction, is an attractive process for on-board hydrogen/syngas production to increase energy efficiency. For operating this dry reforming process in a vehicle, we can use the exhaust gas from an exhaust gas recirculation (EGR) system as a source of carbon dioxide. Catalytic dry reforming of heavy hydrocarbon is a very difficult reaction due to the high accumulation of carbon on the catalyst. Therefore, we attempted to use a non-equilibrium pulsed plasma for the dry reforming of model diesel fuel without a catalyst. We investigated dry reforming of model diesel fuel (n-dodecane) with a low-energy pulsed spark plasma, which is a kind of non-equilibrium plasma at a low temperature of 523 K. Through the reaction, we were able to obtain syngas (hydrogen and carbon monoxide) and a small amount of C{sub 2} hydrocarbon without coke formation at a ratio of CO{sub 2}/C{sub fuel} = 1.5 or higher. The reaction can be conducted at very low temperatures such as 523 K. Therefore, it is anticipated as a novel and effective process for on-board syngas production from diesel fuel using an EGR system.

Applications of solar reforming technology

Energy Technology Data Exchange (ETDEWEB)

Spiewak, I. [Weizmann Inst. of Science, Rehovoth (Israel); Tyner, C.E. [Sandia National Labs., Albuquerque, NM (United States); Langnickel, U. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Koeln (Germany)

1993-11-01

Research in recent years has demonstrated the efficient use of solar thermal energy for driving endothermic chemical reforming reactions in which hydrocarbons are reacted to form synthesis gas (syngas). Closed-loop reforming/methanation systems can be used for storage and transport of process heat and for short-term storage for peaking power generation. Open-loop systems can be used for direct fuel production; for production of syngas feedstock for further processing to specialty chemicals and plastics and bulk ammonia, hydrogen, and liquid fuels; and directly for industrial processes such as iron ore reduction. In addition, reforming of organic chemical wastes and hazardous materials can be accomplished using the high-efficiency destruction capabilities of steam reforming. To help identify the most promising areas for future development of this technology, we discuss in this paper the economics and market potential of these applications.

Health system reform.

Science.gov (United States)

Ortolon, Ken

2009-06-01

A vote on reforming the nation's health care system seems likely this summer as President Obama makes good on a campaign pledge. Although the Democratic leadership in Congress appears ready to push through reform legislation before the next election, TMA and AMA leaders say very little is known about what that "reform" likely will look like.

Simulation study of a proton exchange membrane (PEM) fuel cell system with autothermal reforming

Energy Technology Data Exchange (ETDEWEB)

Ersoz, Atilla [TUBITAK Marmara Research Centre, Energy Systems and Environmental Research Institute, 41470 Gebze, Kocaeli (Turkey); Olgun, Hayati [TUBITAK Marmara Research Centre, Energy Systems and Environmental Research Institute, 41470 Gebze, Kocaeli (Turkey); Ozdogan, Sibel [Marmara University, Faculty of Engineering, Department of Mechanical Engineering, 81040 Goztepe, Istanbul (Turkey)

2006-08-15

This paper presents the results of a study for a 100 kW net electrical power PEM fuel cell system. The major system components are an autothermal reformer, high and low temperature shift reactors, a preferential oxidation reactor, a PEM fuel cell, a combustor and an expander. Intensive heat integration within the PEM fuel cell system has been necessary to achieve acceptable net electrical efficiency levels. The calculations comprise the auxiliary equipment such as pumps, compressors, heaters, coolers, heat exchangers and pipes. The process simulation package 'ASPEN-HYSYS 3.1' has been used along with conventional calculations. The operation conditions of the autothermal reformer have been studied in detail to determine the values, which lead to the production of a hydrogen rich gas mixture with CO concentration at ppm level. The operation parameters of the other reactors have been determined considering the limitations implied by the catalysts involved. A gasoline type hydrocarbon fuel has been studied as the source for hydrogen production. The chemical composition of the hydrocarbon fuel affects the favorable operation conditions of autothermal reforming and the following fuel purification steps. Thermal efficiencies have been calculated for all of the major system components for selected operation conditions. The fuel cell stack efficiency has been calculated as a function of the number of cells (500-1250 cells). Efficiencies of all of the major system components along with auxiliary unit efficiencies determine the net electrical efficiency of the PEM fuel cell system. The obtained net electrical efficiency levels are between 30 (500 cells) and 37% (1250 cells). Hence, they are comparable with or higher than those of the conventional gasoline based internal combustion engine systems, in terms of the mechanical power efficiency.

Simulation study of a proton exchange membrane (PEM) fuel cell system with autothermal reforming

International Nuclear Information System (INIS)

Ersoz, Atilla; Olgun, Hayati; Ozdogan, Sibel

2006-01-01

This paper presents the results of a study for a 100 kW net electrical power PEM fuel cell system. The major system components are an autothermal reformer, high and low temperature shift reactors, a preferential oxidation reactor, a PEM fuel cell, a combustor and an expander. Intensive heat integration within the PEM fuel cell system has been necessary to achieve acceptable net electrical efficiency levels. The calculations comprise the auxiliary equipment such as pumps, compressors, heaters, coolers, heat exchangers and pipes. The process simulation package 'ASPEN-HYSYS 3.1' has been used along with conventional calculations. The operation conditions of the autothermal reformer have been studied in detail to determine the values, which lead to the production of a hydrogen rich gas mixture with CO concentration at ppm level. The operation parameters of the other reactors have been determined considering the limitations implied by the catalysts involved. A gasoline type hydrocarbon fuel has been studied as the source for hydrogen production. The chemical composition of the hydrocarbon fuel affects the favorable operation conditions of autothermal reforming and the following fuel purification steps. Thermal efficiencies have been calculated for all of the major system components for selected operation conditions. The fuel cell stack efficiency has been calculated as a function of the number of cells (500-1250 cells). Efficiencies of all of the major system components along with auxiliary unit efficiencies determine the net electrical efficiency of the PEM fuel cell system. The obtained net electrical efficiency levels are between 30 (500 cells) and 37% (1250 cells). Hence, they are comparable with or higher than those of the conventional gasoline based internal combustion engine systems, in terms of the mechanical power efficiency

Methods of reforming hydrocarbon fuels using hexaaluminate catalysts

Science.gov (United States)

Gardner, Todd H [Morgantown, WV; Berry, David A [Morgantown, WV; Shekhawat, Dushyant [Morgantown, WV

2012-03-27

A metal substituted hexaaluminate catalyst for reforming hydrocarbon fuels to synthesis gas of the general formula AB.sub.yAl.sub.12-yO.sub.19-.delta., A being selected from alkali metals, alkaline earth metals and lanthanide metals or mixtures thereof. A dopant or surface modifier selected from a transitions metal, a spinel of an oxygen-ion conductor is incorporated. The dopant may be Ca, Cs, K, La, Sr, Ba, Li, Mg, Ce, Co, Fe, Ir, Rh, Ni, Ru, Cu, Pe, Os, Pd, Cr, Mn, W, Re, Sn, Gd, V, Ti, Ag, Au, and mixtures thereof. The oxygen-ion conductor may be a perovskite selected from M'RhO.sub.3, M'PtO.sub.3, M'PdO.sub.3, M'IrO.sub.3, M'RuO.sub.3 wherein M'=Mg, Sr, Ba, La, Ca; a spinel selected from MRh.sub.2O.sub.4, MPt.sub.2O.sub.4, MPd.sub.2O.sub.4, MIr.sub.2O.sub.4, MRu.sub.2O.sub.4 wherein M=Mg, Sr, Ba, La, Ca and mixtures thereof; a florite is selected from M''O.sub.2.

A methodology for thermodynamic simulation of high temperature, internal reforming fuel cell systems

Science.gov (United States)

Matelli, José Alexandre; Bazzo, Edson

This work presents a methodology for simulation of fuel cells to be used in power production in small on-site power/cogeneration plants that use natural gas as fuel. The methodology contemplates thermodynamics and electrochemical aspects related to molten carbonate and solid oxide fuel cells (MCFC and SOFC, respectively). Internal steam reforming of the natural gas hydrocarbons is considered for hydrogen production. From inputs as cell potential, cell power, number of cell in the stack, ancillary systems power consumption, reformed natural gas composition and hydrogen utilization factor, the simulation gives the natural gas consumption, anode and cathode stream gases temperature and composition, and thermodynamic, electrochemical and practical efficiencies. Both energetic and exergetic methods are considered for performance analysis. The results obtained from natural gas reforming thermodynamics simulation show that the hydrogen production is maximum around 700 °C, for a steam/carbon ratio equal to 3. As shown in the literature, the found results indicate that the SOFC is more efficient than MCFC.

A Novel Cyclic Catalytic Reformer for Hydrocarbon Fuels, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — This proposed Small Business Innovative Research (SBIR) Phase I addresses development of a compact reformer system based on a cyclic partial oxidation (POx)...

Non-catalytic recuperative reformer

Science.gov (United States)

Khinkis, Mark J.; Kozlov, Aleksandr P.; Kurek, Harry

2015-12-22

A non-catalytic recuperative reformer has a flue gas flow path for conducting hot flue gas from a thermal process and a reforming mixture flow path for conducting a reforming mixture. At least a portion of the reforming mixture flow path is embedded in the flue gas flow path to permit heat transfer from the hot flue gas to the reforming mixture. The reforming mixture flow path contains substantially no material commonly used as a catalyst for reforming hydrocarbon fuel (e.g., nickel oxide, platinum group elements or rhenium), but instead the reforming mixture is reformed into a higher calorific fuel via reactions due to the heat transfer and residence time. In a preferred embodiment, extended surfaces of metal material such as stainless steel or metal alloy that are high in nickel content are included within at least a portion of the reforming mixture flow path.

Numerical simulation of effect of catalyst wire-mesh pressure drop characteristics on flow distribution in catalytic parallel plate steam reformer

DEFF Research Database (Denmark)

Sigurdsson, Haftor Örn; Kær, Søren Knudsen

2012-01-01

Steam reforming of hydrocarbons using a catalytic plate-type-heat-exchanger (CPHE) reformer is an attractive method of producing hydrogen for a fuel cell-based micro combined-heat-and-power system. In this study the flow distribution in a CPHE reformer, which uses a coated wire-mesh catalyst...

Radiant non-catalytic recuperative reformer

Energy Technology Data Exchange (ETDEWEB)

Khinkis, Mark J.; Kozlov, Aleksandr P.

2017-10-31

A radiant, non-catalytic recuperative reformer has a flue gas flow path for conducting hot exhaust gas from a thermal process and a reforming mixture flow path for conducting a reforming mixture. At least a portion of the reforming mixture flow path is positioned adjacent to the flue gas flow path to permit heat transfer from the hot exhaust gas to the reforming mixture. The reforming mixture flow path contains substantially no material commonly used as a catalyst for reforming hydrocarbon fuel (e.g., nickel oxide, platinum group elements or rhenium), but instead the reforming mixture is reformed into a higher calorific fuel via reactions due to the heat transfer and residence time. In a preferred embodiment, a portion of the reforming mixture flow path is positioned outside of flue gas flow path for a relatively large residence time.

Evaluation of Partial Oxidation Reformer Emissions

Energy Technology Data Exchange (ETDEWEB)

Unnasch, Stefan; Fable, Scott; Waterland, Larry

2006-01-06

In this study, a gasoline fuel processor and an ethanol fuel processor were operated under conditions simulating both startup and normal operation. Emissions were measured before and after the AGB in order to quantify the effectiveness of the burner catalyst in controlling emissions. The emissions sampling system includes CEM for O2, CO2, CO, NOx, and THC. Also, integrated gas samples are collected in evacuated canisters for hydrocarbon speciation analysis via GC. This analysis yields the concentrations of the hydrocarbon species required for the California NMOG calculation. The PM concentration in the anode burner exhaust was measured through the placement of a filter in the exhaust stream. The emissions from vehicles with fully developed on board reformer systems were estimated.

Bi-reforming of methane from any source with steam and carbon dioxide exclusively to metgas (CO-2H2) for methanol and hydrocarbon synthesis.

Science.gov (United States)

Olah, George A; Goeppert, Alain; Czaun, Miklos; Prakash, G K Surya

2013-01-16

A catalyst based on nickel oxide on magnesium oxide (NiO/MgO) thermally activated under hydrogen is effective for the bi-reforming with steam and CO(2) (combined steam and dry reforming) of methane as well as natural gas in a tubular flow reactor at elevated pressures (5-30 atm) and temperatures (800-950 °C). By adjusting the CO(2)-to-steam ratio in the gas feed, the H(2)/CO ratio in the produced syn-gas could be easily adjusted in a single step to the desired value of 2 for methanol and hydrocarbon synthesis.

Hydrogen production via autothermal reforming of Diesel fuel

Energy Technology Data Exchange (ETDEWEB)

Pasel, J.; Meissner, J.; Pors, Z.; Cremer, P.; Peters, R.; Stolten, D. [Forschungszentrum Juelich GmbH, Institute for Materials and Processes in Energy Systems (IWV 3), D-52425 Juelich (Germany); Palm, C. [BASF Schwarzheide GmbH, Schipkauer Str. 1, Einheit PFO/I, D-01986 Schwarzheide (Germany)

2004-08-01

Hydrogen, for the operation of a polymer electrolyte fuel cell, can be produced by means of autothermal reforming of liquid hydrocarbons. Experiments, especially with ATR 4, which produces a molar hydrogen stream equivalent to an electrical power in the fuel cell of 3 kW, showed that the process should be preferably run in the temperature range between 700 and 850 . This ensures complete hydrocarbon conversion and avoids the formation of considerable amounts of methane and organic compounds in the product water. Experiments with commercial diesel showed promising results but insufficient long-term stability. Experiments concerning the ignition of the catalytic reaction inside the reformer proved that within 60 s after the addition of water and hydrocarbons the reformer reached 95% of its maximum molar hydrogen flow. Measurements, with respect to reformer start-up, showed that it takes approximately 7 min. to heat up the monolith to a temperature of 340 using an external heating device. Modelling is performed, aimed at the modification of the mixing chamber of ATR Type 5, which will help to amend the homogeneous blending of diesel fuel with air and water in the mixing chamber. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

New Reforms to the Health System

OpenAIRE

Tran Dai, Candice; Duchâtel, Mathieu

2012-01-01

Based on:– Li Ling, “Successful reform of the health system hangs on two key elements,” Zhongguo jingyingbao (China Management News), 18 April 2009.– Li Hongmei, Li Xiaohong, Wang Junping, “Ten experts comment on the new reform of the health system: Providing better and cheaper access to medical care,” Renmin ribao (People’s Daily), 15 April 2009.– Yao Qi, “The new reform of the health system must first and foremost compensate for the shortcomings in the local hospitals,” Yangcheng wanbao (Ya...

Reforming the reform: the Greek National Health System in transition.

Science.gov (United States)

Tountas, Yannis; Karnaki, Panagiota; Pavi, Elpida

2002-10-01

The National Health System (ESY) in Greece, which was established in 1983, is in a state of continuous crisis. This situation is caused mainly by the system's problematic administration, low productivity and inadequate Primary Health Care. These have led the re-elected PASOK government to introduce by the end of 2000 a radical reform of the health system. The 200 reform measures announced by the new Minister of Health and Welfare include changes aiming at: the decentralization of the ESY, the creation of a unified financing system for the social insurance funds, a new management structure in public hospitals, the organization of a Primary Health System in urban areas, and the strengthening of Public Health and Health Promotion. These changes are presented and discussed in this paper.

Analytical study on carbon dioxide reforming of natural gas

International Nuclear Information System (INIS)

Ohashi, Hirofumi; Sakaki, Akihiro; Inagaki, Yoshiyuki

2001-01-01

In recent years, considerable attention has been paid to carbon dioxide reforming of natural gas, namely CO 2 reforming, since it can produce synthesis gas with low hydrogen-to-carbon ratio preferentially used for production of liquid hydrocarbons in the Fischer-Tropsch and methanol syntheses. This reaction has also very important environmental implications because CO 2 , a green house gas, may be converted into valuable feedstock. In JAERI, CO 2 reforming using the out-of-pile test facility, which is a 1/30 scale model of the HTTR hydrogen production system, is also being considered as an application of steam reforming. For the purpose to estimate the reformer performance in the facility, numerical analysis of natural gas reforming processes of CO 2 and combined reactions with steam and CO 2 has been carried out using mathematical model on heat and mass balance accompanied by chemical reactions. The reformer performance was evaluated in the effect of pressure, temperature, process gas composition and reaction rate constants of the catalyst on conversion, product gas composition and heat consumption of He gas. And also, the potential of carbon formation by CH 4 cracking reaction and Boudouard reaction was estimated. (author)

Plasma steam reforming of E85 for hydrogen rich gas production

International Nuclear Information System (INIS)

Zhu Xinli; Hoang Trung; Lobban, Lance L; Mallinson, Richard G

2011-01-01

E85 (85 vol% ethanol and 15 vol% gasoline) is a partly renewable fuel that is increasing in supply availability. Hydrogen production from E85 for fuel cell or internal combustion engine applications is a potential method for reducing CO 2 emissions. Steam reforming of E85 using a nonthermal plasma (pulse corona discharge) reactor has been exploited at low temperature (200-300 0 C) without external heating, diluent gas, oxidant or catalyst in this work. Several operational parameters, including the discharge current, E85 concentration and feed flow rate, have been investigated. The results show that hydrogen rich gases (63-67% H 2 and 22-29% CO, with small amounts of CO 2 , C 2 hydrocarbons and CH 4 ) can be produced by this method. A comparison with ethanol reforming and gasoline reforming under identical conditions has also been made and the behaviour of E85 reforming is found to be close to that of ethanol reforming with slightly higher C 2 hydrocarbons yields.

High Efficiency Solar-based Catalytic Structure for CO₂ Reforming

Energy Technology Data Exchange (ETDEWEB)

Menkara, Hisham [PhosphorTech Corporation, Kennesaw, GA (United States)

2013-09-30

Throughout this project, we developed and optimized various photocatalyst structures for CO₂ reforming into hydrocarbon fuels and various commodity chemical products. We also built several closed-loop and continuous fixed-bed photocatalytic reactor system prototypes for a larger-scale demonstration of CO₂ reforming into hydrocarbons, mainly methane and formic acid. The results achieved have indicated that with each type of reactor and structure, high reforming yields can be obtained by refining the structural and operational conditions of the reactor, as well as by using various sacrificial agents (hole scavengers). We have also demonstrated, for the first time, that an aqueous solution containing acid whey (a common bio waste) is a highly effective hole scavenger for a solar-based photocatalytic reactor system and can help reform CO₂ into several products at once. The optimization tasks performed throughout the project have resulted in efficiency increase in our conventional reactors from an initial 0.02% to about 0.25%, which is 10X higher than our original project goal. When acid whey was used as a sacrificial agent, the achieved energy efficiency for formic acid alone was ~0.4%, which is 16X that of our original project goal and higher than anything ever reported for a solar-based photocatalytic reactor. Therefore, by carefully selecting sacrificial agents, it should be possible to reach energy efficiency in the range of the photosynthetic efficiency of typical crop and biofuel plants (1-3%).

Catalyst for hydrocarbon conversion

International Nuclear Information System (INIS)

Duhaut, P.; Miquel, J.

1975-01-01

A description is given for a catalyst and process for hydrocarbon conversions, e.g., reforming. The catalyst contains an alumina carrier, platinum, iridium, at least one metal selected from uranium, vanadium, and gallium, and optionally halogen in the form of metal halide of one of the aforesaid components. (U.S.)

The Brazilian electrical system reform

International Nuclear Information System (INIS)

Mendonca, A.F.; Dahl, C.

1999-01-01

Although the Brazilian electrical system has been a public monopoly, the threat of electricity shortages from a lack of investment triggered a comprehensive reform. In 1993 the government began a series of laws, decrees and regulations reforming the tariff policy, allowing privatization of utilities, foreign investments and independent power producers, and creating an independent transmission grid and a new electricity regulatory agency (ANEEL). The new regulatory framework is not completely defined but the proposed model intends to transform bulk electricity supply into a competitive market similar to that adopted in England. Our objective is to evaluate whether the proposed reform will succeed in attracting the required private capital, will allow an unregulated wholesale electricity market and will require a strict regulatory framework. The reform has been quite successful in privatizing the distribution companies but is allowing monopolistic rents, and has failed until now to attract private investments to expand generation capacity. The risk of blackouts has increased, and the proposed wholesale electricity market may not be appropriate because of barriers to constructing new hydroelectric units, now 90% of the system. Therefore, a new regulatory framework and a strong regulatory agency with a well-defined tariff policy should have preceded the privatization. (author)

Hydrogen production from hydrocarbons

Energy Technology Data Exchange (ETDEWEB)

Docekal, J

1986-01-01

Hydrogen is an important feed stock for chemical and petroleum industries, in addition to being considered as the energy carrier of the future. At the present time the feed stock hydrogen is mainly manufactured from hydrocarbons using steam reforming. In steam reforming two processes are employed, the conventional process and PSA (pressure swing adsorption) process. These two processes are described and compared. The results show that the total costs and the maintenance costs are lower for the PSA process, the capital outlay is lower for the conventional process, and the operating costs are similar for the two processes.

Banking system reform, earnings quality and credit allocation

Institute of Scientific and Technical Information of China (English)

Xiuli Zhu; Lianjun Li; Yunkui Xue

2012-01-01

This paper investigates credit allocation before and after the 2003 banking system reform in China. We find that relationships between earnings quality and new short-term loans, long-term loans and total loans in listed companies changed significantly after the banking system reform, especially in stateowned listed companies. Further investigation shows that due to the influence of rent-seeking, banks have eased the earnings requirements of non-stateowned listed companies. These findings enhance our understanding of the economic consequences of the banking system reform and of credit discrimination under the new regime.

China's health care system reform: Progress and prospects.

Science.gov (United States)

Li, Ling; Fu, Hongqiao

2017-07-01

This paper discusses the progress and prospects of China's complex health care reform beginning in 2009. The Chinese government's undertaking of systemic reform has achieved laudable achievements, including the expansion of social health insurance, the reform of public hospitals, and the strengthening of primary care. An innovative policy tool in China, policy experimentation under hierarchy, played an important role in facilitating these achievements. However, China still faces gaps and challenges in creating a single payer system, restructuring the public hospitals, and establishing an integrated delivery system. Recently, China issued the 13th 5-year plan for medical reform, setting forth the goals, policy priorities, and strategies for health reform in the following 5 years. Moreover, the Chinese government announced the "Healthy China 2030" blueprint in October 2016, which has the goals of providing universal health security for all citizens by 2030. By examining these policy priorities against the existing gaps and challenges, we conclude that China's health care reform is heading in the right direction. To effectively implement these policies, we recommend that China should take advantage of policy experimentation to mobilize bottom-up initiatives and encourage innovations. Copyright © 2017 John Wiley & Sons, Ltd.

Simulation of biomass and/or coal gasification systems integrated with fuel cells

Energy Technology Data Exchange (ETDEWEB)

Ersoz, A; Ozdogan, S; Caglayan, E; Olgun, H [TUBITAK Marmara Research Center, Kocaeli (Turkey). Institute of Energy

2006-11-15

This paper presents the results of a system simulation study. The HYSYS 3.1 - ASPEN code has been used for simulation. The system consists of a fixed bed gasifier followed by reforming and clean-up units. The produced hydrogen gas is fed to a PEM fuel cell. The gasified hydrocarbons are hazelnut shells, bark, rice straw, animal waste, and two lignites. Hydrocarbon properties, gasification, and reforming process parameters all affect the system efficiency. The effect of the moisture content and oxygen to carbon ratio of the hydrocarbon fees on the fuel processing and overall system efficiencies are presented. The overall efficiency of the system increases with increasing hydrocarbon fees oxygen to carbon ratio; this tendency is more evident at higher moisture levels.

Nano-structured noble metal catalysts based on hexametallate architecture for the reforming of hydrocarbon fuels

Science.gov (United States)

Gardner, Todd H.

2015-09-15

Nano-structured noble metal catalysts based on hexametallate lattices, of a spinel block type, and which are resistant to carbon deposition and metal sulfide formation are provided. The catalysts are designed for the reforming of hydrocarbon fuels to synthesis gas. The hexametallate lattices are doped with noble metals (Au, Pt, Rh, Ru) which are atomically dispersed as isolated sites throughout the lattice and take the place of hexametallate metal ions such as Cr, Ga, In, and/or Nb. Mirror cations in the crystal lattice are selected from alkali metals, alkaline earth metals, and the lanthanide metals, so as to reduce the acidity of the catalyst crystal lattice and enhance the desorption of carbon deposit forming moieties such as aromatics. The catalysts can be used at temperatures as high as 1000.degree. C. and pressures up to 30 atmospheres. A method for producing these catalysts and applications of their use also is provided.

Banking system reform, earnings quality and credit allocation

Directory of Open Access Journals (Sweden)

Xiuli Zhu

2012-09-01

Full Text Available This paper investigates credit allocation before and after the 2003 banking system reform in China. We find that relationships between earnings quality and new short-term loans, long-term loans and total loans in listed companies changed significantly after the banking system reform, especially in state-owned listed companies. Further investigation shows that due to the influence of rent-seeking, banks have eased the earnings requirements of non-state-owned listed companies. These findings enhance our understanding of the economic consequences of the banking system reform and of credit discrimination under the new regime.

Modern Processes of Hydrocarbon Migration and Re-Formation of Oil and Gas Fields (Based on the Results of Monitoring and Geochemical Studies)

Science.gov (United States)

Plotnikova, Irina; Salakhidinova, Gulmira; Nosova, Fidania; Pronin, Nikita; Ostroukhov, Sergey

2015-04-01

Special geochemical studies of oils allowed to allocate a movable migration component of oils in the industrial oil deposits. In the field the migration component of oils varies in different parts of the field. The largest percentage of the light migration component (gas condensate of the oil) was detected in the central part of the Kama-Kinel troughs system. Monitoring of the composition of water, oil and gas (condensate light oil component) in the sedimentary cover and ni crystalline basement led to the conclusion of modern migration of hydrocarbons in sedimentary cover. This proves the existence of the modern processes of formation and reformation of oil and gas fields. This presentation is dedicated to the problem of definition of geochemical criteria of selection of hydrocarbons deposit reformation zone in the sample wells of Minibaevskaya area of Romashkinskoye field. While carrying out this work we examined 11 samples of oil from the Upper Devonian Pashiysky horizon. Four oil samples were collected from wells reckoned among the "anomalous" zones that were marked out according to the results of geophysical, oil field and geological research. Geochemical studies of oils were conducted in the laboratory of geochemistry of the Kazan (Volga-region) Federal University. The wells where the signs of hydrocarbons influx from the deep zones of the crust were recorded are considered to be "anomalous". A number of scientists connect this fact to the hypothesis about periodic influx of deep hydrocarbons to the oil deposits of Romashkinskoye field. Other researchers believe that the source rocks of the adjacent valleys sedimentary cover generate gases when entering the main zone of gas formation, which then migrate up the section and passing through the previously formed deposits of oil, change and "lighten" their composition. Regardless of the point of view on the source of the hydrocarbons, the study of the process of deposits refilling with light hydrocarbons is an

Small-scale reforming of diesel and jet fuels to make hydrogen and syngas for fuel cells: A review

International Nuclear Information System (INIS)

Xu, Xinhai; Li, Peiwen; Shen, Yuesong

2013-01-01

Highlights: • Issues of reforming of heavy hydrocarbon fuels are reviewed. • The advantages of autothermal reforming over other types of reforming are discussed. • The causes and solutions of the major problems for reforming reactors are studied. • Designs and startup strategies for autothermal reforming reactors are proposed. - Abstract: This paper reviews the technological features and challenges of autothermal reforming (ATR) of heavy hydrocarbon fuels for producing hydrogen and syngas onboard to supply fuels to fuel cells for auxiliary power units. A brief introduction at the beginning enumerates the advantages of using heavy hydrocarbon fuels onboard to provide hydrogen or syngas for fuel cells such as solid oxide fuel cells (SOFCs). A detailed review of the reforming and processing technologies of diesel and jet fuels is then presented. The advantages of ATR over steam reforming (SR) and partial oxidation reforming (POX) are summarized, and the ATR reaction is analyzed from a thermodynamic point of view. The causes and possible solutions to the major problems existing in ATR reactors, including hot spots, formation of coke, and inhomogeneous mixing of fuel, steam, and air, are reviewed and studied. Designs of ATR reactors are discussed, and three different reactors, one with a fixed bed, one with monoliths, and one with microchannels are investigated. Novel ideas for design and startup strategies for ATR reactors are proposed at the end of the review

System model development for a methanol reformed 5 kW high temperature PEM fuel cell system

DEFF Research Database (Denmark)

Sahlin, Simon Lennart; Andreasen, Søren Juhl; Kær, Søren Knudsen

2015-01-01

This work investigates the system performance when reforming methanol in an oil heated reformer system for a 5 kW fuel cell system. A dynamic model of the system is created and evaluated. The system is divided into 4 separate components. These components are the fuel cell, reformer, burner...... and evaporator, which are connected by two separate oil circuits, one with a burner and reformer and one with a fuel cell and evaporator. Experiments were made on the reformer and measured oil and bed temperatures are presented in multiple working points. The system is examined at loads from 0 to 5000 W electric...

Experimental Evaluation of a Pt-based Heat Exchanger Methanol Reformer for a HTPEM Fuel Cell Stack

DEFF Research Database (Denmark)

Andreasen, Søren Juhl; Kær, Søren Knudsen; Nielsen, Mads Pagh

2008-01-01

and automotive applications. Using a liquid hydrocarbon as e.g. methanol as the hydrogen carrier and reforming it to a hydrogen rich gas can solve some of these storage issues. The work presented here examines the use of a heat exchanger methanol reformer for use with a HTPEM fuel cell stack. Initial......Fuel cell systems running on pure hydrogen can efficiently produce electricity and heat for various applications, stationary and mobile. Storage volume can be problematic for stationary fuel cell systems with high run-time demands, but it is especially a challenge when dealing with mobile...

Conversion of hydrocarbons and alcohols for fuel cells

Science.gov (United States)

Joensen, Finn; Rostrup-Nielsen, Jens R.

The growing demand for clean and efficient energy systems is the driving force in the development of fuel processing technology for providing hydrogen or hydrogen-containing gaseous fuels for power generation in fuel cells. Successful development of low cost, efficient fuel processing systems will be critical to the commercialisation of this technology. This article reviews various reforming technologies available for the generation of such fuels from hydrocarbons and alcohols. It also briefly addresses the issue of carbon monoxide clean-up and the question of selecting the appropriate fuel(s) for small/medium scale fuel processors for stationary and automotive applications.

Evaluation of health care system reform in Hubei Province, China.

Science.gov (United States)

Sang, Shuping; Wang, Zhenkun; Yu, Chuanhua

2014-02-21

This study established a set of indicators for and evaluated the effects of health care system reform in Hubei Province (China) from 2009 to 2011 with the purpose of providing guidance to policy-makers regarding health care system reform. The resulting indicators are based on the "Result Chain" logic model and include the following four domains: Inputs and Processes, Outputs, Outcomes and Impact. Health care system reform was evaluated using the weighted TOPSIS and weighted Rank Sum Ratio methods. Ultimately, the study established a set of indicators including four grade-1 indicators, 16 grade-2 indicators and 76 grade-3 indicators. The effects of the reforms increased year by year from 2009 to 2011 in Hubei Province. The health status of urban and rural populations and the accessibility, equity and quality of health services in Hubei Province were improved after the reforms. This sub-national case can be considered an example of a useful approach to the evaluation of the effects of health care system reform, one that could potentially be applied in other provinces or nationally.

Modelling and optimization of reforming systems for use in PEM fuel cell systems

International Nuclear Information System (INIS)

Berry, M.; Korsgaard, A.R.; Nielsen, M.P.

2004-01-01

Three different reforming methods for the conversion of natural gas to hydrogen are studied and compared: Steam Reforming (SR), Auto-thermal Reforming (ATR), and Catalytic Partial Oxidation (CPOX). Thermodynamic and kinetic models are developed for the reforming reactors as well as the subsequent reactors needed for CO removal to make the synthesis gas suitable for use in a PEM fuel cell. The systems are optimized to minimize the total volume, and must supply adequate hydrogen to a fuel cell with a 100kW load. The resultant system efficiencies are calculated. The CPOX system is the smallest and exhibits a comparable efficiency to the SR system. The SR system had the best relation between efficiency and volume increase. Optimal temperature profiles within each reactor were found. It was shown that temperature control can significantly reduce reactor volume and increase conversion capabilities. (author)

Characterization and Modeling of a Methanol Reforming Fuel Cell System

DEFF Research Database (Denmark)

Sahlin, Simon Lennart

topologies is the Reformed Methanol Fuel Cell (RMFC) system that operates on a mix of methanol and water. The fuel is reformed with a steam reforming to a hydrogen rich gas, however with additional formation of Carbon Monoxide and Carbon Dioxide. High Temperature Polymer Electrolyte Membrane Fuel Cell (HT...... to heat up the steam reforming process. However, utilizing the excess hydrogen in the system complicates the RMFC system as the amount of hydrogen can vary depending on the fuel methanol supply, fuel cell load and the reformer gas composition. This PhD study has therefore been involved in investigating......Many fuel cells systems today are operated with compressed hydrogen which has great benefits because of the purity of the hydrogen and the relatively simple storage of the fuel. However, compressed hydrogen is stored in the range of 800 bar, which can be expensive to compress.One of the interesting...

System and process for producing fuel with a methane thermochemical cycle

Science.gov (United States)

Diver, Richard B.

2015-12-15

A thermochemical process and system for producing fuel are provided. The thermochemical process includes reducing an oxygenated-hydrocarbon to form an alkane and using the alkane in a reforming reaction as a reducing agent for water, a reducing agent for carbon dioxide, or a combination thereof. Another thermochemical process includes reducing a metal oxide to form a reduced metal oxide, reducing an oxygenated-hydrocarbon with the reduced metal oxide to form an alkane, and using the alkane in a reforming reaction as a reducing agent for water, a reducing agent for carbon dioxide, or a combination thereof. The system includes a reformer configured to perform a thermochemical process.

A miniature fuel reformer system for portable power sources

Science.gov (United States)

Dolanc, Gregor; Belavič, Darko; Hrovat, Marko; Hočevar, Stanko; Pohar, Andrej; Petrovčič, Janko; Musizza, Bojan

2014-12-01

A miniature methanol reformer system has been designed and built to technology readiness level exceeding a laboratory prototype. It is intended to feed fuel cells with electric power up to 100 W and contains a complete setup of the technological elements: catalytic reforming and PROX reactors, a combustor, evaporators, actuation and sensing elements, and a control unit. The system is engineered not only for performance and quality of the reformate, but also for its lightweight and compact design, seamless integration of elements, low internal electric consumption, and safety. In the paper, the design of the system is presented by focussing on its miniaturisation, integration, and process control.

Pre elementary design of primary reformer for hydrogen plant coupled with HTGR type NPP

International Nuclear Information System (INIS)

Dedy Priambodo; Erlan Dewita; Sudi Ariyanto

2012-01-01

Hydrogen has a high potent for new energy, because of it availability. Steam reforming is a fully developed commercial technology and is the most economical method for production of hydrogen. Steam reforming uses an external source of hot gas to heat tubes in which a catalytic reaction takes place that converts steam and lighter hydrocarbons such as natural gas (methane) or refinery feedstock into hydrogen and carbon monoxide (syngas) at high temperature on primary reformer (800-900°C). Utilization of helium from HTGR as heating medium for primary reformer has consequence to type and shape of its reactor. The main goal of this paper is to determine type/shape and pre elementary design of chemical reactor for the cogeneration system of Hydrogen Plant and HTGR The primary reformer for this system is Fixed Bed Multitube reactor with specification tube: NPS 3,5 Sch 40 ST 40S, 0.281 in thickness, number of tube 849 pieces and ASTM HH 30 for tube material. Tube arrangement is 'triangular pitch' on shell Split-Ring Floating Head from Steel Alloy SA 301 Grade B equipted with 8 baffles. (author)

Kazakhstan's Pension System: Pressures for Change and Dramatic Reforms

OpenAIRE

Seitenova, Ai-Gul S.; Becker, Charles M.

2003-01-01

Five years ago, Kazakhstan embarked on a dramatic reform of its pension and social security system in order to move from an unsustainable public defined benefit ("solidarity") system to one of defined mandatory contributions (accumulative system). While assessment of long-run success is premature, early results have exceeded expectations. This paper considers the reform's rationale and initial impact: Why did the Government of Kazakhstan decide to introduce a new pension system? What advantag...

Integral reactor system and method for fuel cells

Science.gov (United States)

Fernandes, Neil Edward; Brown, Michael S; Cheekatamarla, Praveen; Deng, Thomas; Dimitrakopoulos, James; Litka, Anthony F

2013-11-19

A reactor system is integrated internally within an anode-side cavity of a fuel cell. The reactor system is configured to convert hydrocarbons to smaller species while mitigating the lower production of solid carbon. The reactor system may incorporate one or more of a pre-reforming section, an anode exhaust gas recirculation device, and a reforming section.

Mixture preparation by cool flames for diesel-reforming technologies

Science.gov (United States)

Hartmann, L.; Lucka, K.; Köhne, H.

The separation of the evaporation from the high-temperature reaction zone is crucial for the reforming process. Unfavorable mixtures of liquid fuels, water and air lead to degradation by local hot spots in the sensitive catalysts and formation of unwanted by-products in the reformer. Furthermore, the evaporator has to work with dynamic changes in the heat transfer, residence times and educt compositions. By using exothermal pre-reactions in the form of cool flames it is possible to realize a complete and residue-free evaporation of liquid hydrocarbon mixtures. The conditions whether cool flames can be stabilised or not is related to the heat release of the pre-reactions in comparison to the heat losses of the system. Examinations were conducted in a flow reactor at atmospheric pressure and changing residence times to investigate the conditions under which stable cool flame operation is possible and auto-ignition or quenching occurs. An energy balance of the evaporator should deliver the values of heat release by cool flames in comparison to the heat losses of the system. The cool flame evaporation is applied in the design of several diesel-reforming processes (thermal and catalytic partial oxidation, autothermal reforming) with different demands in the heat management and operation range (air ratio λ, steam-to-carbon ratio, SCR). The results are discussed at the end of this paper.

System modeling of an air-independent solid oxide fuel cell system for unmanned undersea vehicles

Science.gov (United States)

Burke, A. Alan; Carreiro, Louis G.

To examine the feasibility of a solid oxide fuel cell (SOFC)-powered unmanned undersea vehicle (UUV), a system level analysis is presented that projects a possible integration of the SOFC stack, fuel steam reformer, fuel/oxidant storage and balance of plant components into a 21-in. diameter UUV platform. Heavy hydrocarbon fuel (dodecane) and liquid oxygen (LOX) are chosen as the preferred reactants. A maximum efficiency of 45% based on the lower heating value of dodecane was calculated for a system that provides 2.5 kW for 40 h. Heat sources and sinks have been coupled to show viable means of thermal management. The critical design issues involve proper recycling of exhaust steam from the fuel cell back into the reformer and effective use of the SOFC stack radiant heat for steam reformation of the hydrocarbon fuel.

Selective control of reformed composition of n-heptane via plasma chemistry

KAUST Repository

Manoj Kumar Reddy, P.

2016-08-23

This paper presents experimental results for reforming n-heptane in a temperature-controlled dielectric barrier discharge reactor to show detailed chemical composition in the products and to propose a potential method to control the product composition. Reformed products of n-heptane and water mixture in an inert Ar feed could be identified as hydrogen, carbon monoxide, oxygenates, and various hydrocarbons, having a wide range of carbon numbers. To selectively increase production of short-chain hydrocarbons, Ar was replaced by CH4. An increased pool of methyl radicals, via plasma chemistry of CH4, might facilitate to stabilize intermediate alkyls (R) into RCH3, which successfully increased short-chain hydrocarbon concentration. When CO2 was supplied instead of Ar (to provide enriched OH and O radicals), significantly higher oxygenate concentrations were obtained through the stabilization of alkyls as ROH (alcohol), and RC([Formula presented])R′ (ketone). The use of methane and carbon dioxide as feed to tailor the products of plasma-assisted reforming of n-heptane with methyl (CH3), or O radicals, is successfully demonstrated in the presence of water vapor. Detailed product analysis, such as product selection, rates and energy efficiency using a gas chromatograph and a gas chromatography mass spectrometer, will be elaborated upon. © 2016 Elsevier Ltd

Steam Methane Reformation Testing for Air-Independent Solid Oxide Fuel Cell Systems

Science.gov (United States)

Mwara, Kamwana N.

2015-01-01

Recently, NASA has been looking into utilizing landers that can be propelled by LOX-CH (sub 4), to be used for long duration missions. Using landers that utilize such propellants, also provides the opportunity to use solid oxide fuel cells as a power option, especially since they are able to process methane into a reactant through fuel reformation. One type of reformation, called steam methane reformation, is a process to reform methane into a hydrogen-rich product by reacting methane and steam (fuel cell exhaust) over a catalyst. A steam methane reformation system could potentially use the fuel cell's own exhaust to create a reactant stream that is hydrogen-rich, and requires less internal reforming of the incoming methane. Also, steam reformation may hold some advantages over other types of reforming, such as partial oxidation (PROX) reformation. Steam reformation does not require oxygen, while up to 25 percent can be lost in PROX reformation due to unusable CO (sub 2) reformation. NASA's Johnson Space Center has conducted various phases of steam methane reformation testing, as a viable solution for in-space reformation. This has included using two different types of catalysts, developing a custom reformer, and optimizing the test system to find the optimal performance parameters and operating conditions.

Canadian hydrocarbon transportation system : transportation assessment

International Nuclear Information System (INIS)

2006-06-01

This document provided an assessment of the Canadian hydrocarbon transportation system. In addition to regulating the construction and operation of Canada's 45,000 km of pipeline that cross international and provincial borders, Canada's National Energy Board (NEB) regulates the trade of natural gas, oil and natural gas liquids. The ability of pipelines to delivery this energy is critical to the country's economic prosperity. The pipeline system includes large-diameter, cross-country, high-pressure natural gas pipelines, low-pressure crude oil and oil products pipelines and small-diameter pipelines. In order to assess the hydrocarbon transportation system, staff at the NEB collected data from pipeline companies and a range of publicly available sources. The Board also held discussions with members of the investment community regarding capital markets and emerging issues. The assessment focused largely on evaluating whether Canadians benefit from an efficient energy infrastructure and markets. The safety and environmental integrity of the pipeline system was also evaluated. The current adequacy of pipeline capacity was assessed based on price differentials compared with firm service tolls for major transportation paths; capacity utilization on pipelines; and, the degree of apportionment on major oil pipelines. The NEB concluded that the Canadian hydrocarbon transportation system is working effectively, with an adequate capacity in place on existing natural gas pipelines, but with a tight capacity on oil pipelines. It was noted that shippers continue to indicate that they are reasonably satisfied with the services provided by pipeline companies and that the NEB-regulated pipeline companies are financially stable. 14 refs, 11 tabs., 28 figs., 4 appendices

Determination of optimal reformer temperature in a reformed methanol fuel cell system using ANFIS models and numerical optimization methods

DEFF Research Database (Denmark)

Justesen, Kristian Kjær; Andreasen, Søren Juhl

2015-01-01

In this work a method for choosing the optimal reformer temperature for a reformed methanol fuel cell system is presented based on a case study of a H3 350 module produced by Serenergy A/S. The method is based on ANFIS models of the dependence of the reformer output gas composition on the reformer...... temperature and fuel flow, and the dependence of the fuel cell voltage on the fuel cell temperature, current and anode supply gas CO content. These models are combined to give a matrix of system efficiencies at different fuel cell currents and reformer temperatures. This matrix is then used to find...... the reformer temperature which gives the highest efficiency for each fuel cell current. The average of this optimal efficiency curve is 32.11% and the average efficiency achieved using the standard constant temperature is 30.64% an increase of 1.47 percentage points. The gain in efficiency is 4 percentage...

Thermodynamic analysis of ethanol/water system in a fuel cell reformer with the Gibbs energy minimization method

International Nuclear Information System (INIS)

Lima da Silva, Aline; De Fraga Malfatti, Celia; Heck, Nestor Cesar

2003-01-01

The use of fuel cells is a promising technology in the conversion of chemical to electrical energy. Due to environmental concerns related to the reduction of atmospheric pollution and greenhouse gases emissions such as CO 2 , NO x and hydrocarbons, there have been many researches about fuel cells using hydrogen as fuel. Hydrogen gas can be produced by several routes; a promising one is the steam reforming of ethanol. This route may become an important industrial process, especially for sugarcane producing countries. Ethanol is renewable energy and presents several advantages over other sources related to natural availability, storage and handling safety. In order to contribute to the understanding of the steam reforming of ethanol inside the reformer, this work displays a detailed thermodynamic analysis of the ethanol/water system, in the temperature range of 500-1200K, considering different H 2 O/ethanol reforming ratios. The equilibrium determinations were done with the help of the Gibbs energy minimization method using the Generalized Reduced Gradient algorithm (GRG). Based on literature data, the species considered in calculations were: H 2 , H 2 O, CO, CO 2 , CH 4 , C 2 H 4 , CH 3 CHO, C 2 H 5 OH (gas phase) and C gr . (graphite phase). The thermodynamic conditions for carbon deposition (probably soot) on catalyst during gas reforming were analyzed, in order to establish temperature ranges and H 2 O/ethanol ratios where carbon precipitation is not thermodynamically feasible. Experimental results from literature show that carbon deposition causes catalyst deactivation during reforming. This deactivation is due to encapsulating carbon that covers active phases on a catalyst substrate, e.g. Ni over Al 2 O 3 . In the present study, a mathematical relationship between Lagrange multipliers and the carbon activity (with reference to the graphite phase) was deduced, unveiling the carbon activity in the reformer atmosphere. From this, it is possible to foreseen if soot

Computer Modeling of Platinum Reforming Reactors | Momoh ...

African Journals Online (AJOL)

This paper, instead of using a theoretical approach has considered a computer model as means of assessing the reformate composition for three-stage fixed bed reactors in platforming unit. This is done by identifying many possible hydrocarbon transformation reactions that are peculiar to the process unit, identify the ...

Steam reforming of bio-ethanol over Ni on Ce-ZrO2 support: Influence of redox properties on the catalyst reactivity

Directory of Open Access Journals (Sweden)

Sumittra Charojrochkul

2006-11-01

Full Text Available The steam reforming of ethanol over Ni on Ce-ZrO2 support, (Ni/ Ce-ZrO2 were studied. The catalyst provides significantly higher reforming reactivity and excellent resistance toward carbon deposition compared to Ni/Al2O3 under the same conditions. At the temperature above 800ºC, the main products from the reforming processes over Ni/Ce-ZrO2 were H2, CO, and CO2 with small amount of CH4 depending on the inlet ethanol/steam and oxygen/ethanol ratios, whereas high hydrocarbon compounds i.e., C2H4 and C2H6 were also observed from the reforming of ethanol over Ni/Al2O3 in the range of conditions studied (700- 1000ºC.These excellent ethanol reforming performances of Ni/Ce-ZrO2 in terms of stability, reactivity and product selectivities are due to the high redox property of Ce-ZrO2. During the ethanol reforming process, in addition to the reactions on Ni surface, the gas-solid reactions between the gaseous components presented in the system (C2H5OH, C2H6, C2H4, CH4, CO2, CO, H2O, and H2 and the lattice oxygen (Ox on Ce-ZrO2 surface also take place. Among these redox reactions, the reactions of adsorbed surface hydrocarbons with the lattice oxygen (Ox (CnHm + Ox → nCO + m/2(H2 + Ox-n can eliminate the formation of high hydrocarbons (C2H6 and C2H4, which easily decompose and form carbon species on Ni surface (CnHm→ nC + m/2H2.

Simulation and calculation of three-reactor system of catalytic reforming

International Nuclear Information System (INIS)

Rikalovska, Tatjana; Markovska, Liljana; Meshko, Vera; Poposka, Filimena

1999-01-01

The process of catalytic reforming has been operated for quite a long time, one can not always find real data for the kinetics and thermodynamics of the reactions that take place during the catalytic reforming process in order to facilitate the designing of reactor system or its simulation in a wide:ran e of process parameters. Kinetic and thermodynamic data have been collected for the reactions that take place during the catalytic reforming process. The stress has been pointed on four major reactions: dehydrogenation of naphthenes (aromatization), dehydrocyclization of paraffins and hydrocracking of naphthenes and paraffins. On the base of such a kinetic model, the reforming process has been described with a system of differential equations. For the purpose of solving these equations computer programs for simulation of a three-reactor system for adiabatic operation of the reactors. The computer simulation of the mathematical model of this three-reactor system has been accomplished by use of the ISIM-dynamic simulator. The results obtained out of the simulation agree very good with the data of the real process of catalytic reforming in OKTA Crude Oil Refinery in Skopje, Macedonia. (Author)

Pre-reforming of natural gas in solid oxide fuel-cell systems

Energy Technology Data Exchange (ETDEWEB)

Peters, R.; Riensche, E.; Cremer, P. [Institute for Materials and Processes Systems IWV 3: Energy Process Engineering, Forschungszentrum Juelich (Germany)

2000-03-01

Several measures concerning fuel processing in a solid oxide fuel cell (SOFC) system offer the possibility of significant cost reduction and higher system efficiencies. For SOFC systems, the ratio between internal and pre-reforming has to be optimized on the basis of experimental performance data. Furthermore, anode gas recycling by an injector in front of the pre-reformer can eliminate the steam generator and the corresponding heat of evaporation. A detailed study is carried out on pre-reforming in a reformer of considerable size (10 kW{sub el}). Simulating anode gas recycling with an injector, the influence of carbon dioxide on reactor performance was studied. Also, the dependence of the methanol conversion on mass flow and temperature will be discussed. In addition, some results concerning the dynamic behaviour of the pre-reformer are given. (orig.)

The uncertain reform to the Chilean pension system

Directory of Open Access Journals (Sweden)

Ivan Obando Camino

2016-12-01

Full Text Available Abstract: This paper describes the attempts to introduce some solidary features into the private pension system and the reform strategy followed thereof by left-wing governments in Chile since 2008. The negative impact on retirees of a private pension system driven by financial markets and profit-oriented actors has led to a continuing questioning of this system by experts and the population. The strong veto powers that major industry actors hold in the policy process determined that those governments adopted an institutional reform strategy based on layering. This paper surmises that this strategy may a have an impact on the pension system in the long-term by steering it gradually towards a public pension system. Keywords: Social security. Pension system. Solidarity system

Green technology for conversion of renewable hydrocarbon based on plasma-catalytic approach

Science.gov (United States)

Fedirchyk, Igor; Nedybaliuk, Oleg; Chernyak, Valeriy; Demchina, Valentina

2016-09-01

The ability to convert renewable biomass into fuels and chemicals is one of the most important steps on our path to green technology and sustainable development. However, the complex composition of biomass poses a major problem for established conversion technologies. The high temperature of thermochemical biomass conversion often leads to the appearance of undesirable byproducts and waste. The catalytic conversion has reduced yield and feedstock range. Plasma-catalytic reforming technology opens a new path for biomass conversion by replacing feedstock-specific catalysts with free radicals generated in the plasma. We studied the plasma-catalytic conversion of several renewable hydrocarbons using the air plasma created by rotating gliding discharge. We found that plasma-catalytic hydrocarbon conversion can be conducted at significantly lower temperatures (500 K) than during the thermochemical ( 1000 K) and catalytic (800 K) conversion. By using gas chromatography, we determined conversion products and found that conversion efficiency of plasma-catalytic conversion reaches over 85%. We used obtained data to determine the energy yield of hydrogen in case of plasma-catalytic reforming of ethanol and compared it with other plasma-based hydrogen-generating systems.

Benefits of a single payment system: case study of Abu Dhabi health system reforms.

Science.gov (United States)

Vetter, Philipp; Boecker, Klaus

2012-12-01

In 2005 leaders in the wealthy Emirate of Abu Dhabi inherited an health system from their predecessors that was well-intentioned in its historic design, but that did not live up to aspirations in any dimension. First, the Emirate defined a vision to deliver "world-class" quality care in response to citizen's needs. It has since introduced tiered mandatory health insurance for all inhabitants linked to a single standard payment system, which generates accurate data as an invaluable by-product. A newly created independent health system regulator monitors these data and licenses, audits, and inspects all health service professionals, facilities, and insurers accordingly. We analyse these health system reforms using the "Getting Health Reform Right" framework. Our analysis suggests that an integrated set of reforms addressing all reform levers is critical to achieving the outcomes observed. The reform programme has improved access, by giving all residents health cards. The approximate doubling of demand has been matched by flexible supply, with the private sector adding 5 new hospitals and 93 clinics to the health system infrastructure since 2006. The focus on reliable raw-data flows through the single standard payment system functions as a motor for improvement services, innovation, and investment, for instance by allowing payers to 'pay for quality', which may well be applicable in other contexts. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Education System Reform in China after 1978: Some Practical Implications

Science.gov (United States)

Sun, Miantao

2010-01-01

Purpose: This paper aims to provide an overview of education system reform in China since 1978, and its practical implications. Design/methodology/approach: Data were collected from literature review and interview. An overview of education system reform and its practical implications was found through data analysis. Findings: There has been two…

IMPLEMENTATION OF MODERN FOREIGN APPROACHES TO UKRAINIAN PENSION SYSTEM REFORMING

Directory of Open Access Journals (Sweden)

Anna Khemii

2017-11-01

Full Text Available A study of the experience of Western European countries in implementing structural reforms of the pension insurance system and the implementation of such experience in Ukraine. The main task of the pension system of any country in the world is to ensure the corresponding stable level of incomes of pensioners and at the same time maintain their financial stability. The increase in the proportion of pensioners increases the burden on pension systems, and mainly measures taken by countries are aimed at reducing pension costs and parametric reforms. Methodology. This article investigates the prerequisites and consequences of reforming the pension systems of the Member States of the Organization for International Cooperation and Development. Considered measures to ensure the financial stability of pension systems of the countries concerned, increased the social and stimulating role of pension insurance in the society. The methodological basis of the article is methods of scientific cognition, which enable to expose basic conformities to the law of development of the pension systems, priority ways to ensure their financial sustainability. Such methods are in particular used: analysis and synthesis – during research of financial indicators of pension systems; systematization – for revealing methods for reforming pension systems, their detailed analysis and the definition of their features; scientific abstraction – with the purpose of forming theoretical generalizations and conclusions. Results. The article investigates the trends of reforming pension insurance systems in some countries. It is established that today the main characteristics of pension reforms in foreign countries are increasing the retirement age, improving the solidary component of the pension system, reducing the role of state pension insurance. Some countries raise their contribution rates; the conditions for early retirement are becoming tougher. Almost nobody decided to

Optimizing the Heat Exchanger Network of a Steam Reforming System

DEFF Research Database (Denmark)

Nielsen, Mads Pagh; Korsgaard, Anders Risum; Kær, Søren Knudsen

2004-01-01

Proton Exchange Membrane (PEM) based combined heat and power production systems are highly integrated energy systems. They may include a hydrogen production system and fuel cell stacks along with post combustion units optionally coupled with gas turbines. The considered system is based on a natural...... stationary numerical system model was used and process integration techniques for optimizing the heat exchanger network for the reforming unit are proposed. Objective is to minimize the system cost. Keywords: Fuel cells; Steam Reforming; Heat Exchanger Network (HEN) Synthesis; MINLP....... gas steam reformer along with gas purification reactors to generate clean hydrogen suited for a PEM stack. The temperatures in the various reactors in the fuel processing system vary from around 1000°C to the stack temperature at 80°C. Furthermore, external heating must be supplied to the endothermic...

Two-step processing of oil shale to linear hydrocarbons

Energy Technology Data Exchange (ETDEWEB)

Eliseev, O.L.; Ryzhov, A.N.; Latypova, D.Zh.; Lapidus, A.L. [Russian Academy of Sciences, Moscow (Russian Federation). N.D. Zelinsky Institute of Organic Chemistry; Avakyan, T.A. [Gubkin Russian State University of Oil and Gas, Moscow (Russian Federation)

2013-11-01

Thermal and catalytic steam reforming of oil shale mined from Leningrad and Kashpir deposits was studied. Experiments were performed in fixed bed reactor by varying temperature and steam flow rate. Data obtained were approximated by empirical formulas containing some parameters calculated by least-squares method. Thus predicting amount of hydrogen, carbon monoxide and methane in producer gas is possible for given particular kind of oil shale, temperature and steam flow rate. Adding Ni catalyst enriches hydrogen and depletes CO content in effluent gas at low gasification temperatures. Modeling gas simulating steam reforming gases (H{sub 2}, CO, CO{sub 2}, and N{sub 2} mixture) was tested in hydrocarbon synthesis over Co-containing supported catalyst. Selectivity of CO conversion into C{sub 5+} hydrocarbons reaches 84% while selectivity to methane is 7%. Molecular weight distribution of synthesized alkanes obeys Anderson-Schulz-Flory equation and chain growth probability 0.84. (orig.)

Demonstration of direct internal reforming for MCFC power plants

Energy Technology Data Exchange (ETDEWEB)

Aasberg-Petersen, K.; Christensen, P.S.; Winther, S.K. [HALDOR TOPSOE A/S, Lynby (Denmark)] [and others

1996-12-31

The conversion of methane into hydrogen for an MCFC by steam reforming is accomplished either externally or internally in the stack. In the case of external reforming the plant electrical efficiency is 5% abs. lower mainly because more parasitic power is required for air compression for stack cooling. Furthermore, heat produced in the stack must be transferred to the external reformer to drive the endothermic steam reforming reaction giving a more complex plant lay-out. A more suitable and cost effective approach is to use internal steam reforming of methane. Internal reforming may be accomplished either by Indirect Internal Reforming (DIR) and Direct Internal Reforming (DIR) in series or by DIR-only as illustrated. To avoid carbon formation in the anode compartment higher hydrocarbons in the feedstock are converted into hydrogen, methane and carbon oxides by reaction with steam in ail adiabatic prereformer upstream the fuel cell stack. This paper discusses key elements of the desire of both types of internal reforming and presents data from pilot plants with a combined total of more than 10,000 operating hours. The project is being carried out as part of the activities of the European MCFC Consortium ARGE.

Modelling and Optimization of Reforming Systems for use in PEM Fuel Cell

DEFF Research Database (Denmark)

Berry, Melissa; Korsgaard, Anders Risum; Nielsen, Mads Pagh

2004-01-01

Three different reforming methods for the conversion of natural gas to hydrogen are studied and compared: Steam Reforming (SR), Auto-thermal Reforming (ATR), and Catalytic Partial Oxidation (CPOX). Thermodynamic and kinetic models are developed for the reforming reactors as well as the subsequent...... reactors needed for CO removal to make the synthesis gas suitable for use in a PEM fuel cell. The systems are optimized to minimize the total volume, and must supply adequate hydrogen to a fuel cell with a 100kW load. The resultant system efficiencies are calculated. The CPOX system is the smallest...

Hydrocarbons in Argentina: networks, territories, integration

International Nuclear Information System (INIS)

Carrizo, S.C.

2003-12-01

Argentinean hydrocarbons networks have lived a huge reorganizing the structure, after the State reform in the 90's. Activities deregulation and the privatization of YPF and Gas del Estado forced the sector re-concentration, since then dominated by foreign companies, leaded by Repsol YPF. The hydrocarbons federalization contributed to the weakening and un-capitalization loss of wealth of the State. These changes resulted in an increase of the hydrocarbons production allowing to achieve the self-supply. Nevertheless, the expansion of internal networks has not been large enough to ensure the coverage of new requirements. Besides, several infrastructures have been built up to join external markets. National networks are connected to those of near neighboring countries. This integration is an opportunity for the 'South Cone' countries to enhance their potentials. In the country, hydrocarbons territories undergo the reorganizing the structure effects (unemployment, loss of territorial identity, etc). With many difficulties and very different possibilities, those territories, like Comodoro Rivadavia, Ensenada et and Bahia Blanca, look for their re-invention. (author)

Study on system layout and component design in the HTTR hydrogen production system. Contract research

Energy Technology Data Exchange (ETDEWEB)

Nishihara, Tetsuo; Shimizu, Akira [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Tanihira, Masanori [Mitsubishi Heavy Industries Ltd., Tokyo (Japan); Uchida, Shoji [Advanced Reactor Technology Co., Ltd., Tokyo (Japan)

2003-01-01

The global warming becomes a significant issue in the world so that it needs to reduce the CO{sub 2} emission. It is expected that hydrogen is in place of the fossil fuels such as coal and oil, and plays the important role to resolve the global warming. There are several hydrogen making processes such as water electrolysis and steam reforming of hydrocarbon. Steam reforming of hydrocarbon is a major hydrogen making process because of economy in industry. It utilizes the fossil fuels as process heat for chemical reaction and results in a large CO{sub 2} emission. New steam reforming system without fossil fuel can contribute to resolve the global warming. High temperature gas-cooled reactor (HTGR) has a unique feature to be able to supply a hot helium gas whose temperature is approximately 950degC at the reactor outlet. This makes HTGR possible to utilize for not only power generation but also process heat utilization. JAERI constructed the high temperature engineering test reactor (HTTR) that is a sort of HTGR in Oarai establishment and starts operation. Nuclear heat utilization is one of the R and D items of the HTTR. The steam reforming system coupling to the HTTR for hydrogen production has been designed. This report represents the system layout and design specification of key components in HTTR steam reforming system. (author)

Study on system layout and component design in the HTTR hydrogen production system. Contract research

International Nuclear Information System (INIS)

Nishihara, Tetsuo; Shimizu, Akira; Uchida, Shoji

2003-01-01

The global warming becomes a significant issue in the world so that it needs to reduce the CO 2 emission. It is expected that hydrogen is in place of the fossil fuels such as coal and oil, and plays the important role to resolve the global warming. There are several hydrogen making processes such as water electrolysis and steam reforming of hydrocarbon. Steam reforming of hydrocarbon is a major hydrogen making process because of economy in industry. It utilizes the fossil fuels as process heat for chemical reaction and results in a large CO 2 emission. New steam reforming system without fossil fuel can contribute to resolve the global warming. High temperature gas-cooled reactor (HTGR) has a unique feature to be able to supply a hot helium gas whose temperature is approximately 950degC at the reactor outlet. This makes HTGR possible to utilize for not only power generation but also process heat utilization. JAERI constructed the high temperature engineering test reactor (HTTR) that is a sort of HTGR in Oarai establishment and starts operation. Nuclear heat utilization is one of the R and D items of the HTTR. The steam reforming system coupling to the HTTR for hydrogen production has been designed. This report represents the system layout and design specification of key components in HTTR steam reforming system. (author)

Control of a methanol reformer system using an Adaptive Neuro‐Fuzzy Inference System approach

DEFF Research Database (Denmark)

Justesen, Kristian Kjær; Andersen, John; Ehmsen, Mikkel Præstholm

This work presents a stoichiometry control strategy for a reformed methanol fuel cell system, which uses a reformer to produce hydrogen for an HTPEM fuel cell. One such system is the Serenus H3-350 battery charger developed by the Danish company Serenegy® which this work is based on. The poster...

Removal of CO from reformate for PEFC application.

Energy Technology Data Exchange (ETDEWEB)

Lee, S. H. D.

1998-09-14

Polymer electrolyte fuel cells (PEFCs) are being actively developed worldwide for transportation applications. The fuel gas generated from reforming hydrocarbon fuels contains small amounts of CO (0.5-1 vol%), even after the water-gas shift reaction. Carbon monoxide is preferentially adsorbed on the platinum electrocatalyst in the PEFC, thus blocking the access of H{sub 2} to the surface of the catalyst and resulting in the degradation of the cell performance. Therefore, the CO concentration in the PBFC reformate must be reduced to a tolerable level of {le} 100 ppm (1). Catalytic preferential oxidation (2), anode air bleed (3), or a combination of the two can be used to reduce CO to trace levels, but their use in a dynamically varying system is problematic. We are developing a sorption process based on the reversible complex-forming and dissociation reactions of CO with Cu(I). These reactions are well documented in patent and literature (4,5).

Developing a School Finance System for K-12 Reform in Qatar

Science.gov (United States)

Guarino, Cassandra M.; Galama, Titus; Constant, Louay; Gonzalez, Gabriella; Tanner, Jeffery C.; Goldman, Charles A.

2009-01-01

Reform-minded leaders of Qatar, who have embarked on a sweeping reform of their nation's education system, asked RAND to evaluate the education finance system that has been adopted and to offer suggestions for improvements. The authors analyze the system's evolution and resource allocation patterns between 2004 and 2006 and develop analytic tools…

The role of fluid migration system in hydrocarbon accumulation in Maichen Sag, Beibuwan Basin

Science.gov (United States)

Liu, Hongyu; Yang, Jinxiu; Wu, Feng; Chen, Wei; Liu, Qianqian

2018-02-01

Fluid migration system is of great significance for hydrocarbon accumulation, including the primary migration and secondary migration. In this paper, the fluid migration system is analysed in Maichen Sag using seismic, well logging and core data. Results show that many factors control the hydrocarbon migration process, including hydrocarbon generation and expulsion period from source rocks, microfractures developed in the source rocks, the connected permeable sand bodies, the vertical faults cutting into/through the source rocks and related fault activity period. The spatial and temporal combination of these factors formed an effective network for hydrocarbon expulsion and accumulation, leading to the hydrocarbon reservoir distribution at present. Generally, a better understanding of the hydrocarbon migration system can explain the present status of hydrocarbon distribution, and help select future target zones for oil and gas exploration.

Investigating the interface between health system reform and HIV ...

African Journals Online (AJOL)

During the period in which the HIV/AIDS epidemic has taken hold in sub-Saharan Africa, health system reforms have and continue to be introduced throughout the region. In spite of the multidisciplinary research undertaken, it can be questioned whether the relationships between processes of reform and some of the critical ...

Analysis of ORC (Organic Rankine Cycle) systems with pure hydrocarbons and mixtures of hydrocarbon and retardant for engine waste heat recovery

International Nuclear Information System (INIS)

Song, Jian; Gu, Chun-wei

2015-01-01

The Organic Rankine Cycle (ORC) has been demonstrated to be a promising technology for the recovery of engine waste heat. Systems with hydrocarbons as the working fluids exhibit good thermal performance. However, the flammability of hydrocarbons limits their practical applications because of safety concerns. This paper examines the potential of using mixtures of a hydrocarbon and a retardant in an ORC system for engine waste heat recovery. Refrigerants R141b and R11 are selected as the retardants and blended with the hydrocarbons to form zeotropic mixtures. The flammability is suppressed, and in addition, zeotropic mixtures provide better temperature matches with the heat source and sink, which reduces the exergy loss within the heat exchange processes, thereby increasing the cycle efficiency. Energetic and exergetic analysis of ORC systems with pure hydrocarbons and with mixtures of a hydrocarbon and a retardant are conducted and compared. The net power output and the second law efficiency are chosen as the evaluation criteria to select the suitable working fluid compositions and to define the optimal set of thermodynamic parameters. The simulation results reveal that the ORC system with cyclohexane/R141b (0.5/0.5) is optimal for this engine waste heat recovery case, thereby increasing the net power output of the system by 13.3% compared to pure cyclohexane. - Highlights: • ORC with zeotropic mixtures for engine waste heat recovery is discussed. • Energetic and exergetic analysis of ORC system are conducted. • Optimal mixture working fluid composition is identified. • Greater utilization of jacket water and lower irreversible loss are important.

Manufacture of aromatic hydrocarbons from coal hydrogenation products

Energy Technology Data Exchange (ETDEWEB)

A.S. Maloletnev; M.A. Gyul' malieva [Institute for Fossil Fuels, Moscow (Russian Federation)

2007-08-15

The manufacture of aromatic hydrocarbons from coal distillates was experimentally studied. A flow chart for the production of benzene, ethylbenzene, toluene, and xylenes was designed, which comprised the hydrogen treatment of the total wide-cut (or preliminarily dephenolized) fraction with FBP 425{sup o}C; fractional distillation of the hydrotreated products into IBP-60, 60-180, 180-300, and 300-425{sup o}C fractions; the hydro-cracking of middle fractions for increasing the yield of gasoline fractions whenever necessary; the catalytic reform of the fractions with bp up to 180{sup o}C; and the extraction of aromatic hydrocarbons.

Co-current and Counter-Current Operations for Steam Reforming of Heptane in a Novel CFB Membrane Reformer

International Nuclear Information System (INIS)

Chen, Z.; Elnashaie, S.S.E.H.

2004-01-01

Hydrogen production by steam reforming of higher hydrocarbon over nickel supported catalyst is investigated in an earlier suggested novel Circulating Fast Fluidized Bed Membrane Reformer (CFFBMR). Palladium hydrogen membranes are used with co-current and counter-current operation modes. It is found that hydrogen production has a non-monotonic dependence upon the reaction temperature in the range of 623-823 K. Between 623 and 723 K. the yields of hydrogen decrease and then increase between 723 and 823 K. This important phenomenon is investigated, discussed and explained. The simulation results shows that the reformer performance can be significantly improved using hydrogen membranes, especially in the counter-current operation mode. At low temperatures around 623 K, both .co-current and counter-current operation modes provide similar yields of hydrogen. While at temperature 723 K and higher, the counter-current operation provides the highest yield of hydrogen

Reforming of natural gas—hydrogen generation for small scale stationary fuel cell systems

Science.gov (United States)

Heinzel, A.; Vogel, B.; Hübner, P.

The reforming of natural gas to produce hydrogen for fuel cells is described, including the basic concepts (steam reforming or autothermal reforming) and the mechanisms of the chemical reactions. Experimental work has been done with a compact steam reformer, and a prototype of an experimental reactor for autothermal reforming was tested, both containing a Pt-catalyst on metallic substrate. Experimental results on the steam reforming system and a comparison of the steam reforming process with the autothermal process are given.

Reforming the road freight transportation system using systems thinking: An investigation of Coronial inquests in Australia.

Science.gov (United States)

Newnam, Sharon; Goode, Natassia; Salmon, Paul; Stevenson, Mark

2017-04-01

Road freight transport is considered to be one of the most dangerous industries in Australia, accounting for over 30% of all work fatalities. Whilst system reform (i.e., change to policy and practice) is needed, it is not clear what this reform should be, or what approaches should be used to drive it. This article argues that road freight transportation reform should be underpinned by a systems thinking approach. Efforts to understand crash causation should be focused beyond the driver and identify contributing factors at other levels with the road freight system. Accordingly, we present the findings from a study that examined whether Australian Coronial investigations into road freight crashes reflect support appropriate system reform. Content analysis was used to identify the contributing factors and interrelations implicated in the road freight crashes described in publicly available Australian Coroner's inquest reports from the last 10 years (2004-2014; n=21). The results found evidence to suggest that the Coronial inquests provide some understanding of the complex system of factors influencing road freight transportation crashes in Australia. However, there was a lack of evidence to suggest an understanding of system-based reform based on the identification of reductionist-focused recommendations. It is concluded that researchers and practitioners (ie., government and industry) need to work together to develop prevention efforts focused on system reforms. Systems thinking based data collection and analysis frameworks are urgently required to help develop this understanding in road freight transportation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Reforming the South African Social Security Adjudication System ...

African Journals Online (AJOL)

Reforming the South African Social Security Adjudication System: innovative experiences ... Dispute resolution systems in the labour relations, business competition ... the rights of access to justice, to a fair trial and to just administrative action).

Reforming the health care system: implications for health care marketers.

Science.gov (United States)

Petrochuk, M A; Javalgi, R G

1996-01-01

Health care reform has become the dominant domestic policy issue in the United States. President Clinton, and the Democratic leaders in the House and Senate have all proposed legislation to reform the system. Regardless of the plan which is ultimately enacted, health care delivery will be radically changed. Health care marketers, given their perspective, have a unique opportunity to ensure their own institutions' success. Organizational, managerial, and marketing strategies can be employed to deal with the changes which will occur. Marketers can utilize personal strategies to remain proactive and successful during an era of health care reform. As outlined in this article, responding to the health care reform changes requires strategic urgency and action. However, the strategies proposed are practical regardless of the version of health care reform legislation which is ultimately enacted.

Chemical Kinetics of Hydrocarbon Ignition in Practical Combustion Systems

International Nuclear Information System (INIS)

Westbrook, C.K.

2000-01-01

Chemical kinetic factors of hydrocarbon oxidation are examined in a variety of ignition problems. Ignition is related to the presence of a dominant chain branching reaction mechanism that can drive a chemical system to completion in a very short period of time. Ignition in laboratory environments is studied for problems including shock tubes and rapid compression machines. Modeling of the laboratory systems are used to develop kinetic models that can be used to analyze ignition in practical systems. Two major chain branching regimes are identified, one consisting of high temperature ignition with a chain branching reaction mechanism based on the reaction between atomic hydrogen with molecular oxygen, and the second based on an intermediate temperature thermal decomposition of hydrogen peroxide. Kinetic models are then used to describe ignition in practical combustion environments, including detonations and pulse combustors for high temperature ignition, and engine knock and diesel ignition for intermediate temperature ignition. The final example of ignition in a practical environment is homogeneous charge, compression ignition (HCCI) which is shown to be a problem dominated by the kinetics intermediate temperature hydrocarbon ignition. Model results show why high hydrocarbon and CO emissions are inevitable in HCCI combustion. The conclusion of this study is that the kinetics of hydrocarbon ignition are actually quite simple, since only one or two elementary reactions are dominant. However, there are many combustion factors that can influence these two major reactions, and these are the features that vary from one practical system to another

Steam and partial oxidation reforming options for hydrogen production from fossil fuels for PEM fuel cells

Directory of Open Access Journals (Sweden)

Yousri M.A. Welaya

2012-06-01

Full Text Available Proton exchange membrane fuel cell (PEM generates electrical power from air and from hydrogen or hydrogen rich gas mixtures. Therefore, there is an increasing interest in converting current hydrocarbon based marine fuels such as natural gas, gasoline, and diesel into hydrogen rich gases acceptable to the PEM fuel cells on board ships. Using chemical flow sheeting software, the total system efficiency has been calculated. Natural gas appears to be the best fuel for hydrogen rich gas production due to its favorable composition of lower molecular weight compounds. This paper presents a study for a 250 kW net electrical power PEM fuel cell system utilizing a partial oxidation in one case study and steam reformers in the second. This study has shown that steam-reforming process is the most competitive fuel processing option in terms of fuel processing efficiency. Partial oxidation process has proved to posses the lowest fuel processing efficiency. Among the options studied, the highest fuel processing efficiency is achieved with natural gas steam reforming system.

Wireless sensing on surface hydrocarbon production systems

International Nuclear Information System (INIS)

Kane, D; McStay, D; Mulholland, J; Costello, L

2009-01-01

The use of wireless sensor networks for monitoring and optimising the performance of surface hydrocarbon production systems is reported. Wireless sensor networks are shown to be able to produce comprehensively instrumented XTs and other equipment that generate the data required by Intelligent Oilfield systems. The information produced by such systems information can be used for real-time operational control, production optimization and troubleshooting.

Interactive physically-based structural modeling of hydrocarbon systems

International Nuclear Information System (INIS)

Bosson, Mael; Grudinin, Sergei; Bouju, Xavier; Redon, Stephane

2012-01-01

Hydrocarbon systems have been intensively studied via numerical methods, including electronic structure computations, molecular dynamics and Monte Carlo simulations. Typically, these methods require an initial structural model (atomic positions and types, topology, etc.) that may be produced using scripts and/or modeling tools. For many systems, however, these building methods may be ineffective, as the user may have to specify the positions of numerous atoms while maintaining structural plausibility. In this paper, we present an interactive physically-based modeling tool to construct structural models of hydrocarbon systems. As the user edits the geometry of the system, atomic positions are also influenced by the Brenner potential, a well-known bond-order reactive potential. In order to be able to interactively edit systems containing numerous atoms, we introduce a new adaptive simulation algorithm, as well as a novel algorithm to incrementally update the forces and the total potential energy based on the list of updated relative atomic positions. The computational cost of the adaptive simulation algorithm depends on user-defined error thresholds, and our potential update algorithm depends linearly with the number of updated bonds. This allows us to enable efficient physically-based editing, since the computational cost is decoupled from the number of atoms in the system. We show that our approach may be used to effectively build realistic models of hydrocarbon structures that would be difficult or impossible to produce using other tools.

Evaluating the medical malpractice system and options for reform.

Science.gov (United States)

Kessler, Daniel P

2011-01-01

The U.S. medical malpractice liability system has two principal objectives: to compensate patients who are injured through the negligence of healthcare providers and to deter providers from practicing negligently. In practice, however, the system is slow and costly to administer. It both fails to compensate patients who have suffered from bad medical care and compensates those who haven't. According to opinion surveys of physicians, the system creates incentives to undertake cost-ineffective treatments based on fear of legal liability--to practice "defensive medicine." The failures of the liability system and the high cost of health care in the United States have led to an important debate over tort policy. How well does malpractice law achieve its intended goals? How large of a problem is defensive medicine and can reforms to malpractice law reduce its impact on healthcare spending? The flaws of the existing system have led a number of states to change their laws in a way that would reduce malpractice liability--to adopt "tort reforms." Evidence from several studies suggests that wisely chosen reforms have the potential to reduce healthcare spending significantly with no adverse impact on patient health outcomes.

Novel Reforming Catalysts

Energy Technology Data Exchange (ETDEWEB)

Pfefferle, Lisa D; Haller, Gary L

2012-10-16

Aqueous phase reforming is useful for processing oxygenated hydrocarbons to hydrogen and other more useful products. Current processing is hampered by the fact that oxide based catalysts are not stable under high temperature hydrothermal conditions. Silica in the form of structured MCM-41 is thermally a more stable support for Co and Ni than conventional high surface area amorphous silica but hydrothermal stability is not demonstrated. Carbon nanotube supports, in contrast, are highly stable under hydrothermal reaction conditions. In this project we show that carbon nanotubes are stable high activity/selectivity supports for the conversion of ethylene glycol to hydrogen.

Estimation of free-hydrocarbon recovery from dual-pump systems

International Nuclear Information System (INIS)

Charbeneau, R.J.

1995-01-01

Free-product hydrocarbon which floats on the water table may be recovered using single-pump and dual-pump systems. The factors that affect the long-term free-product recovery using dual-pump systems include the free-product thickness as measured in monitoring wells, the ground-water pumping rate, hydrocarbon density and viscosity, and the soil permeability. This paper presents a simple model for prediction of free-product recovery using dual-pump systems. The model predicts the long-term rather than short-term recovery rates, and lends itself to spreadsheet calculations on microcomputers. A particularly simple form arises for cases where the drawdown is small. An application for estimating recovery from a dual-pump system is presented, and limitations of the model are summarized

Steam reforming of heptane in a fluidized bed membrane reactor

Science.gov (United States)

Rakib, Mohammad A.; Grace, John R.; Lim, C. Jim; Elnashaie, Said S. E. H.

n-Heptane served as a model compound to study steam reforming of naphtha as an alternative feedstock to natural gas for production of pure hydrogen in a fluidized bed membrane reactor. Selective removal of hydrogen using Pd 77Ag 23 membrane panels shifted the equilibrium-limited reactions to greater conversion of the hydrocarbons and lower yields of methane, an intermediate product. Experiments were conducted with no membranes, with one membrane panel, and with six panels along the height of the reactor to understand the performance improvement due to hydrogen removal in a reactor where catalyst particles were fluidized. Results indicate that a fluidized bed membrane reactor (FBMR) can provide a compact reformer for pure hydrogen production from a liquid hydrocarbon feedstock at moderate temperatures (475-550 °C). Under the experimental conditions investigated, the maximum achieved yield of pure hydrogen was 14.7 moles of pure hydrogen per mole of heptane fed.

Reforming the Public Agricultural Extension System in China ...

International Development Research Centre (IDRC) Digital Library (Canada)

Reforming the Public Agricultural Extension System in China : Supporting Rural Innovation. The public agricultural extension system has played a critical role in Chinese agricultural development over the past few decades. There is growing evidence that since the mid-1990s the system has failed to provide new and ...

Hydrogen from catalytic reforming of biomass-derived hydrocarbons in liquid water

Science.gov (United States)

Cortright, R. D.; Davda, R. R.; Dumesic, J. A.

2002-08-01

Concerns about the depletion of fossil fuel reserves and the pollution caused by continuously increasing energy demands make hydrogen an attractive alternative energy source. Hydrogen is currently derived from nonrenewable natural gas and petroleum, but could in principle be generated from renewable resources such as biomass or water. However, efficient hydrogen production from water remains difficult and technologies for generating hydrogen from biomass, such as enzymatic decomposition of sugars, steam-reforming of bio-oils and gasification, suffer from low hydrogen production rates and/or complex processing requirements. Here we demonstrate that hydrogen can be produced from sugars and alcohols at temperatures near 500K in a single-reactor aqueous-phase reforming process using a platinum-based catalyst. We are able to convert glucose-which makes up the major energy reserves in plants and animals-to hydrogen and gaseous alkanes, with hydrogen constituting 50% of the products. We find that the selectivity for hydrogen production increases when we use molecules that are more reduced than sugars, with ethylene glycol and methanol being almost completely converted into hydrogen and carbon dioxide. These findings suggest that catalytic aqueous-phase reforming might prove useful for the generation of hydrogen-rich fuel gas from carbohydrates extracted from renewable biomass and biomass waste streams.

Global pension systems and their reform: Worldwide drivers, trends, and challenges

OpenAIRE

Holzmann, Robert

2012-01-01

Across the world, pension systems and their reforms are in a constant state of flux driven by shifting objectives, moving reform needs, and a changing enabling environment. The ongoing worldwide financial crisis and the adjustment to an uncertain 'new normal' will make future pension systems different from past ones. The objectives of this policy review paper are threefold: (i) to briefly ...

The evaluator as technical assistant: A model for systemic reform support

Science.gov (United States)

Century, Jeanne Rose

This study explored evaluation of systemic reform. Specifically, it focused on the evaluation of a systemic effort to improve K-8 science, mathematics and technology education. The evaluation was of particular interest because it used both technical assistance and evaluation strategies. Through studying the combination of these roles, this investigation set out to increase understanding of potentially new evaluator roles, distinguish important characteristics of the evaluator/project participant relationship, and identify how these roles and characteristics contribute to effective evaluation of systemic science education reform. This qualitative study used interview, document analysis, and participant observation as methods of data collection. Interviews were conducted with project leaders, project participants, and evaluators and focused on the evaluation strategies and process, the use of the evaluation, and technical assistance. Documents analyzed included transcripts of evaluation team meetings and reports, memoranda and other print materials generated by the project leaders and the evaluators. Data analysis consisted of analytic and interpretive procedures consistent with the qualitative data collected and entailed a combined process of coding transcripts of interviews and meetings, field notes, and other documents; analyzing and organizing findings; writing of reflective and analytic memos; and designing and diagramming conceptual relationships. The data analysis resulted in the development of the Multi-Function Model for Systemic Reform Support. This model organizes systemic reform support into three functions: evaluation, technical assistance, and a third, named here as "systemic perspective." These functions work together to support the project's educational goals as well as a larger goal--building capacity in project participants. This model can now serve as an informed starting point or "blueprint" for strategically supporting systemic reform.

Regulatory system reform of occupational health and safety in China.

Science.gov (United States)

Wu, Fenghong; Chi, Yan

2015-01-01

With the explosive economic growth and social development, China's regulatory system of occupational health and safety now faces more and more challenges. This article reviews the history of regulatory system of occupational health and safety in China, as well as the current reform of this regulatory system in the country. Comprehensive, a range of laws, regulations and standards that promulgated by Chinese government, duties and responsibilities of the regulatory departments are described. Problems of current regulatory system, the ongoing adjustments and changes for modifying and improving regulatory system are discussed. The aim of reform and the incentives to drive forward more health and safety conditions in workplaces are also outlined.

Gas composition modeling in a reformed Methanol Fuel Cell system using adaptive Neuro-Fuzzy Inference Systems

DEFF Research Database (Denmark)

Justesen, Kristian Kjær; Andreasen, Søren Juhl; Shaker, Hamid Reza

2013-01-01

This work presents a method for modeling the gas composition in a Reformed Methanol Fuel Cell system. The method is based on Adaptive Neuro-Fuzzy-Inference-Systems which are trained on experimental data. The developed models are of the H2, CO2, CO and CH3OH mass flows of the reformed gas. The ANFIS......, or fuel cell diagnostics systems....

Study and modelling of deactivation by coke in catalytic reforming of hydrocarbons on Pt-Sn/Al{sub 2}O{sub 3} catalyst; La microbalance inertielle: etude et modelisation cinetique de la desactivation par le coke en reformage catalytique des hydrocarbures sur catalyseur Pt-Sn/Al{sub 2}O{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Mathieu-Deghais, S.

2004-07-01

Catalytic reforming is the refining process that produces gasoline with a high octane number. During a reforming operation, undesired side reactions promote the formation of carbon deposits (coke) on the surface of the catalyst. As the reactions proceed, the coke accumulation leads to a progressive decrease of the catalyst activity and to a change in its selectivity. Getting this phenomenon under control is interesting to optimize the industrial plants. This work aims to improve the comprehension and the modeling of coke formation and its deactivating effect on reforming reactions, while working under conditions chosen within a range as close as possible to the industrial conditions of the regenerative process. The experimental study is carried out with a micro unit that is designed to observe simultaneously the coke formation and its influence on the catalyst activity. A vibrational microbalance reactor (TEOM - Tapered Element Oscillating Microbalance) is used to provide continuous monitoring of coke. On-line gas chromatography is used to observe the catalyst activity and selectivity as a function of the coke content. The coking experiments are performed on a fresh Pt-Sn/alumina catalyst, with mixtures of hydrocarbon molecules of 7 carbon atoms as hydrocarbon feeds. The coking tests permitted to highlight the operating parameters that may affect the amount of coke, and to identify the hydrocarbon molecules that behave as coke intermediate. A kinetic model for coke formation could be developed through the compilation of these results. The catalytic activity analysis permitted to point out the coke effect on both of the active phases of the catalyst, to construct a simplified reforming kinetic model that simulates the catalyst activity under the reforming conditions, and to quantify deactivation via deactivation functions. (author)

Modeling Of Proton Exchange Membrane Fuel Cell Systems

DEFF Research Database (Denmark)

Nielsen, Mads Pagh

The objective of this doctoral thesis was to develop reliable steady-state and transient component models suitable to asses-, develop- and optimize proton exchange membrane (PEM) fuel cell systems. Several components in PEM fuel cell systems were characterized and modeled. The developed component...... cell systems. Consequences of indirectly fueling PEM stacks with hydrocarbons using reforming technology were investigated using a PEM stack model including CO poisoning kinetics and a transient Simulink steam reforming system model. Aspects regarding the optimization of PEM fuel cell systems...

Internal reforming of methane in solid oxide fuel cell systems

Science.gov (United States)

Peters, R.; Dahl, R.; Klüttgen, U.; Palm, C.; Stolten, D.

Internal reforming is an attractive option offering a significant cost reduction, higher efficiencies and faster load response of a solid oxide fuel cell (SOFC) power plant. However, complete internal reforming may lead to several problems which can be avoided with partial pre-reforming of natural gas. In order to achieve high total plant efficiency associated with low energy consumption and low investment costs, a process concept has been developed based on all the components of the SOFC system. In the case of anode gas recycling an internal steam circuit exists. This has the advantage that there is no need for an external steam generator and the steam concentration in the anode gas is reduced. However, anode gas recycling has to be proven by experiments in a pre-reformer and for internal reforming. The addition of carbon dioxide clearly shows a decrease in catalyst activity, while for temperatures higher than 1000 K hydrogen leads to an increase of the measured methane conversion rates.

Regulatory system reform of occupational health and safety in China

Science.gov (United States)

WU, Fenghong; CHI, Yan

2015-01-01

With the explosive economic growth and social development, China’s regulatory system of occupational health and safety now faces more and more challenges. This article reviews the history of regulatory system of occupational health and safety in China, as well as the current reform of this regulatory system in the country. Comprehensive, a range of laws, regulations and standards that promulgated by Chinese government, duties and responsibilities of the regulatory departments are described. Problems of current regulatory system, the ongoing adjustments and changes for modifying and improving regulatory system are discussed. The aim of reform and the incentives to drive forward more health and safety conditions in workplaces are also outlined. PMID:25843565

Hydrocarbon reforming catalysts and new reactor designs for compact hydrogen generators

Energy Technology Data Exchange (ETDEWEB)

Schaefer, A.; Schwab, E.; Urtel, H. [BASF SE, Ludwigshafen (Germany); Farrauto, R. [BASF Catalysts LLC, Iselin, NJ (United States)

2010-12-30

A hydrogen based future energy scenario will use fuel cells for the conversion of chemically stored energy into electricity. Depending upon the type of fuel cell, different specifications will apply for the feedstock which is converted in the cell, ranging from very clean hydrogen for PEM-FC's to desulfurized methane for SOFC and MCFC technology. For the foreseeable future, hydrogen will be supplied by conventional reforming, however operated in compact and dynamic reformer designs. This requires that known catalyst formulations are offered in specific geometries, giving flexibility for novel reactor design options. These specific geometries can be special tablet shapes as well as monolith structures. Finally, also nonhydrocarbon feedstock might be used in special applications, e.g. bio-based methanol and ethanol. BASF offers catalysts for the full process chain starting from feedstock desulfurization via reforming, high temperature shift, low temperature shift to CO fine polishing either via selective oxidation or selective methanation. Depending upon the customer's design, most stages can be served either with precious metal based monolith solutions or base metal tablet solutions. For the former, we have taken the automobile catalyst monolith support and extended its application to the fuel cell hydrogen generation. Washcoats of precious metal supported catalysts can for example be deposited on ceramic monoliths and/or metal heat exchangers for efficient generation of hydrogen. Major advantages are high through puts due to more efficient heat transfer for catalysts on metal heat exchangers, lower pressure drop with greater catalyst mechanical and thermal stability compared to particulate catalysts. Base metal tablet catalysts on the other hand can have intrinsic cost advantages, larger fractions of the reactor can be filled with active mass, and if produced in unconventional shape, again novel reactor designs are made possible. Finally, if it comes to

Evaluation of an integrated methane autothermal reforming and high-temperature proton exchange membrane fuel cell system

International Nuclear Information System (INIS)

Authayanun, Suthida; Saebea, Dang; Patcharavorachot, Yaneeporn; Arpornwichanop, Amornchai

2015-01-01

The aim of this study was to investigate the performance and efficiency of an integrated autothermal reforming and HT-PEMFC (high-temperature proton exchange membrane fuel cell) system fueled by methane. Effect of the inclusion of a CO (carbon monoxide) removal process on the integrated HT-PEMFC system was considered. An increase in the S/C (steam-to-carbon) ratio and the reformer temperature can enhance the hydrogen fraction while the CO formation reduces with increasing S/C ratio. The fuel processor efficiency of the methane autothermal reformer with a WGS (water gas shift reactor) reactor, as the CO removal process, is higher than that without a WGS reactor. A higher fuel processor efficiency can be obtained when the feed of the autothermal reformer is preheated to the reformer temperature. Regarding the cell performance, the reformate gas from the methane reformer operated at T in  = T R and with a high S/C ratio is suitable for the HT-PEMFC system without a WGS reactor. When considering the HT-PEMFC system with a WGS reactor, the CO poisoning has less significant impact on the cell performance and the system can be operated over a broader range to minimize the required total active area. A WGS reactor is necessary for the methane autothermal reforming and HT-PEMFC integrated system with regard to the system efficiency. - Highlights: • An integrated autothermal reforming and HT-PEMFC system was studied. • The HT-PEMFC system with and without a CO removal process was considered. • Parametric analysis was performed to obtain a high system efficiency. • The HT-PEMFC system with the WGS reactor can be run over a broader range. • The efficiencies of the HT-PEMFC systems without and with a WGS reactor were reported

Catalytic autothermal reforming increases fuel cell flexibility

Science.gov (United States)

Flytzani-Stephanopoulos, M.; Voecks, G. E.

1981-01-01

Experimental results are presented for the autothermal reforming (ATR) of n-hexane, n-tetradecane, benzene and benzene solutions of naphthalene. The tests were run at atmospheric pressure and at moderately high reactant preheat temperatures in the 800-900 K range. Carbon formation lines were determined for paraffinic and aromatic liquids. Profiles were determined for axial bed temperature and composition. Space velocity efforts were assessed, and the locations and types of carbon were recorded. Significant reactive differences between hydrocarbons were identified. Carbon formation characteristics were hydrocarbon specific. The differing behavior of paraffinic and aromatic fuels with respect to their carbon formation may be important in explaining the narrow range of carbon-free operating conditions found in the ATR of number two fuel oil.

Systems and processes for conversion of ethylene feedstocks to hydrocarbon fuels

Science.gov (United States)

Lilga, Michael A.; Hallen, Richard T.; Albrecht, Karl O.; Cooper, Alan R.; Frye, John G.; Ramasamy, Karthikeyan Kallupalayam

2018-04-03

Systems, processes, and catalysts are disclosed for obtaining fuel and fuel blends containing selected ratios of open-chain and closed-chain fuel-range hydrocarbons suitable for production of alternate fuels including gasolines, jet fuels, and diesel fuels. Fuel-range hydrocarbons may be derived from ethylene-containing feedstocks and ethanol-containing feedstocks.

Systems and processes for conversion of ethylene feedstocks to hydrocarbon fuels

Science.gov (United States)

Lilga, Michael A.; Hallen, Richard T.; Albrecht, Karl O.; Cooper, Alan R.; Frye, John G.; Ramasamy, Karthikeyan Kallupalayam

2017-09-26

Systems, processes, and catalysts are disclosed for obtaining fuels and fuel blends containing selected ratios of open-chain and closed-chain fuel-range hydrocarbons suitable for production of alternate fuels including gasolines, jet fuels, and diesel fuels. Fuel-range hydrocarbons may be derived from ethylene-containing feedstocks and ethanol-containing feedstocks.

Preliminary design of steam reformer in out-pile demonstration test facility for HTTR heat utilization system

Energy Technology Data Exchange (ETDEWEB)

Haga, Katsuhiro; Hino, Ryutaro; Inagaki, Yosiyuki; Hata, Kazuhiko; Aita, Hideki; Sekita, Kenji; Nishihara, Tetsuo; Sudo, Yukio [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Yamada, Seiya

1996-11-01

One of the key objectives of HTTR is to demonstrate effectiveness of high-temperature nuclear heat utilization system. Prior to connecting a heat utilization system to HTTR, an out-pile demonstration test is indispensable for the development of experimental apparatuses, operational control and safety technology, and verification of the analysis code of safety assessment. For the first heat utilization system of HTTR, design of the hydrogen production system by steam reforming is going on. We have proposed the out-pile demonstration test plan of the heat utilization system and conducted preliminary design of the test facility. In this report, design of the steam reformer, which is the principal component of the test facility, is described. In the course of the design, two types of reformers are considered. The one reformer contains three reactor tubes and the other contains one reactor tube to reduce the construction cost of the test facility. We have selected the steam reformer operational conditions and structural specifications by analyzing the steam reforming characteristics and component structural strength for each type of reformer. (author)

REFORMING OF LAND MANAGEMENT SYSTEM UNDER AUTHORITY OF DECENTRALIZATION

Directory of Open Access Journals (Sweden)

Dorosh O.S.

2016-05-01

Full Text Available The article is devoted to the problems related to the reform of land management from the beginning of the land reform ill the presentine. This need has arisen due to making another attempt to reorganize the structure of the land structures. With the launch of the land reform established the State Committee of Ukraine for Land Resources in 1992. To speed up land reform and land privatization in 2001 formed the administrative bodies of the State Committee for Land Resources of Ukraine. In order to improve the system of state land management in 2011 created the State Agency of Land Resources of Ukraine, which was reorganized in 2014 into the State Service of Ukraine of geodesy, cartography and cadastre. Over the years, in order to "optimize" the system of central executive body, content of this body has not been changed and constantly was changing its name and subordination, namely: the State Committee for Land Resources - Ministry of Ecology and Natural Resources of Ukraine, the State Agency of Land Resources of Ukraine - Ministry of Agrarian policy and Food of Ukraine, State Service of Ukraine of geodesy, cartography and cadastre - Ministry of regional development, construction and housing. On the basis of analysis concerning the powers of the central executive authorities, local authorities found that the newly farmed Service State Land Cadastre das not contribute to the effectiveness of the administration, especially at the national level, as these features ave not provided by "Regulations on State Land Cadastre " and other regulations. In addition, the local level detected removal of local government in matters of land relations. In conclusion, proposed system based redistribution of powers on the level of central executive bodies and local authorities to reform the system of land management with regard to decentralized processes in Ukraine. It is advisable to restore central authority for land reform and regulation of land relations to the

systemic chemical education reform [scer] in the global era

African Journals Online (AJOL)

IICBA01

growing the systemic way of thinking of our students that is one of the most important characteristics of Global Era. Here is the systemic education reform which means the change of our educational system from linearity to systemic in which we design the curriculum and write content systemically, which presented by SATL ...

Characterization of a nose-only inhalation exposure system for hydrocarbon mixtures and jet fuels.

Science.gov (United States)

Martin, Sheppard A; Tremblay, Raphael T; Brunson, Kristyn F; Kendrick, Christine; Fisher, Jeffrey W

2010-04-01

A directed-flow nose-only inhalation exposure system was constructed to support development of physiologically based pharmacokinetic (PBPK) models for complex hydrocarbon mixtures, such as jet fuels. Due to the complex nature of the aerosol and vapor-phase hydrocarbon exposures, care was taken to investigate the chamber hydrocarbon stability, vapor and aerosol droplet compositions, and droplet size distribution. Two-generation systems for aerosolizing fuel and hydrocarbons were compared and characterized for use with either jet fuels or a simple mixture of eight hydrocarbons. Total hydrocarbon concentration was monitored via online gas chromatography (GC). Aerosol/vapor (A/V) ratios, and total and individual hydrocarbon concentrations, were determined using adsorbent tubes analyzed by thermal desorption-gas chromatography-mass spectrometry (TDS-GC-MS). Droplet size distribution was assessed via seven-stage cascade impactor. Droplet mass median aerodynamic diameter (MMAD) was between 1 and 3 mum, depending on the generator and mixture utilized. A/V hydrocarbon concentrations ranged from approximately 200 to 1300 mg/m(3), with between 20% and 80% aerosol content, depending on the mixture. The aerosolized hydrocarbon mixtures remained stable during the 4-h exposure periods, with coefficients of variation (CV) of less than 10% for the total hydrocarbon concentrations. There was greater variability in the measurement of individual hydrocarbons in the A-V phase. In conclusion, modern analytical chemistry instruments allow for improved descriptions of inhalation exposures of rodents to aerosolized fuel.

Advances in catalysts for internal reforming in high temperature fuel cells

Science.gov (United States)

Dicks, A. L.

Catalytic steam reforming of natural gas is an attractive method of producing the hydrogen required by the present generation of fuel cells. The molten carbonate (MCFC) and solid oxide (SOFC) fuel cells operate at high enough temperatures for the endothermic steam reforming reaction to be carried out within the stack. For the MCFC, the conventional anodes have insufficient activity to catalyse the steam reforming of natural gas. For these cells, internal reforming can be achieved only with the addition of a separate catalyst, preferably located in close proximity to the anode. However, in the so-called `Direct Internal Reforming' configuration, attack from alkali in the MCFC may severely limit catalyst lifetime. In the case of the state-of-the-art SOFC, natural gas can be reformed directly on the nickel cermet anode. However, in the SOFC, temperature variations in the cell caused by the reforming reaction may limit the amount of internal reforming that can be allowed in practice. In addition, some external pre-reforming may be desirable to remove high molecular weight hydrocarbons from the fuel gas, which would otherwise crack to produce elemental carbon. Degradation of the SOFC anode may also be a problem when internal reforming is carried out. This has prompted several research groups to investigate the use of alternative anode materials.

Reforming petroleum-based fuels for fuel cell vehicles : composition-performance relationships

International Nuclear Information System (INIS)

Kopasz, J. P.; Miller, L. E.; Ahmed, S.; Devlin, P. R.; Pacheco, M.

2001-01-01

Onboard reforming of petroleum-based fuels, such as gasoline, may help ease the introduction of fuel cell vehicles to the marketplace. Although gasoline can be reformed, it is optimized to meet the demands of ICEs. This optimization includes blending to increase the octane number and addition of oxygenates and detergents to control emissions. The requirements for a fuel for onboard reforming to hydrogen are quite different than those for combustion. Factors such as octane number and flame speed are not important; however, factors such as hydrogen density, catalyst-fuel interactions, and possible catalyst poisoning become paramount. In order to identify what factors are important in a hydrocarbon fuel for reforming to hydrogen and what factors are detrimental, we have begun a program to test various components of gasoline and blends of components under autothermal reforming conditions. The results indicate that fuel composition can have a large effect on reforming behavior. Components which may be beneficial for ICEs for their octane enhancing value were detrimental to reforming. Fuels with high aromatic and naphthenic content were more difficult to reform. Aromatics were also found to have an impact on the kinetics for reforming of paraffins. The effects of sulfur impurities were dependent on the catalyst. Sulfur was detrimental for Ni, Co, and Ru catalysts. Sulfur was beneficial for reforming with Pt catalysts, however, the effect was dependent on the sulfur concentration

Calculation of Interfacial Tensions of Hydrocarbon-water Systems under Reservoir Conditions

DEFF Research Database (Denmark)

Zuo, You-Xiang; Stenby, Erling Halfdan

1998-01-01

Assuming that the number densities of each component in a mixture are linearly distributed across the interface between the coexisting vapor-liquid or liquid-liquid phases, we developed in this research work a linear-gradient-theory (LGT) model for computing the interfacial tension of hydrocarbon......-brine systems. The new model was tested on a number of hydrocarbon-water/brine mixtures and two crude oil-water systems under reservoir conditions. The results show good agreement between the predicted and the experimental interfacial tension data.......Assuming that the number densities of each component in a mixture are linearly distributed across the interface between the coexisting vapor-liquid or liquid-liquid phases, we developed in this research work a linear-gradient-theory (LGT) model for computing the interfacial tension of hydrocarbon-water...... mixtures on the basis of the SRK equation of state. With this model, it is unnecessary to solve the time-consuming density-profile equations of the gradient-theory model. In addition, a correlation was developed for representing the effect of electrolytes on the interfacial tension of hydrocarbon...

Health-system reform and universal health coverage in Latin America.

Science.gov (United States)

Atun, Rifat; de Andrade, Luiz Odorico Monteiro; Almeida, Gisele; Cotlear, Daniel; Dmytraczenko, T; Frenz, Patricia; Garcia, Patrícia; Gómez-Dantés, Octavio; Knaul, Felicia M; Muntaner, Carles; de Paula, Juliana Braga; Rígoli, Felix; Serrate, Pastor Castell-Florit; Wagstaff, Adam

2015-03-28

Starting in the late 1980s, many Latin American countries began social sector reforms to alleviate poverty, reduce socioeconomic inequalities, improve health outcomes, and provide financial risk protection. In particular, starting in the 1990s, reforms aimed at strengthening health systems to reduce inequalities in health access and outcomes focused on expansion of universal health coverage, especially for poor citizens. In Latin America, health-system reforms have produced a distinct approach to universal health coverage, underpinned by the principles of equity, solidarity, and collective action to overcome social inequalities. In most of the countries studied, government financing enabled the introduction of supply-side interventions to expand insurance coverage for uninsured citizens--with defined and enlarged benefits packages--and to scale up delivery of health services. Countries such as Brazil and Cuba introduced tax-financed universal health systems. These changes were combined with demand-side interventions aimed at alleviating poverty (targeting many social determinants of health) and improving access of the most disadvantaged populations. Hence, the distinguishing features of health-system strengthening for universal health coverage and lessons from the Latin American experience are relevant for countries advancing universal health coverage. Copyright © 2015 Elsevier Ltd. All rights reserved.

Enhancing teaching and learning in the Dutch vocational education system : Reforms enacted

NARCIS (Netherlands)

Elly de Bruijn; Stephen Billett; Jeroen Onstenk

2017-01-01

This book discusses how the Dutch vocational education system has undergone significant waves of reform driven by global imperatives, national concerns and governmental policy goals. Like elsewhere, the impetuses for these reforms are directed to generating a more industry-responsive,

Design of a steam reforming system to be connected to the HTTR

International Nuclear Information System (INIS)

Hada, K.; Nishihara, T.; Shibata, T.; Shiozawa, S.

1996-01-01

Top priority objective for developing the first heat utilization system to be connected to the HTTR is to demonstrate technical feasibility of a nuclear process heat utilization system for production of hydrogen for the first time in the world. Major issues to be resolved for coupling the heat utilization system to the HTTR are 1)to develop safety philosophy for reasonably and reliably ensuring safety of the nuclear reactor, 2)to develop control design concept for the total system of the nuclear reactor and heat utilization system because thermal dynamics of endothermic chemical reactor to be heated by nuclear heat is much different from the nuclear reactor, 3)to develop helium-heated components and 4)to develop enhanced hydrogen production technologies for achieving competitiveness to a fossil-fired plant. A steam reforming hydrogen production system was studied as one of the first priority candidates for an HTTR-heat utilization system due to matured technology in fossil-fired plants and since technical solutions demonstrated by the coupling of the steam reforming system to the HTTR will contribute to all other hydrogen production systems. Basic design philosophy for the HTTR-steam reforming system is that the steam reforming plant downstream of an intermediate secondary helium loop is designed at the same safety level as fossil-fired plants and therefore the secondary helium loop was selected as a safety barrier to the HTTR nuclear reactor. (J.P.N.)

Production of hydrogen from hydrocarbons

Energy Technology Data Exchange (ETDEWEB)

Lohmueller, R

1984-03-01

Hydrocarbons are the preferred starting materials for the industrial production of hydrogen. Most hydrogen is produced by steam reforming of light hydrocarbons. Partial oxidation of heavy oil and residue is used for the production of H/sub 2/ and synthesis gas in large plants. In both cases gas purification was improved. Hydrogen-rich gases like coke oven gas, refinery-offgas, and offgases from the chemical and petrochemical industry have high potential for becoming a major source of hydrogen. Processes for recovering H/sub 2/ (and by-products) are condensation and rectification at low temperatures and, most attractive and versatile for the production of very pure H/sub 2/, adsorption (PSA). The environmental impact of H/sub 2/ production lies mainly in the emission of CO/sub 2/ and heat. Other forms of pollution can be considerably reduced by conventional methods. The economy of H/sub 2/ production depends essentially on price and availability of the raw materials.

The Reform of Management System of Accountants in China

Institute of Scientific and Technical Information of China (English)

无

2002-01-01

The common existing problems of the false processing of accounting information in China and the solution--the appointment system of accountants are analyzed in this paper, it is proposed that the reform of management systems of accountants--the appointment system of accountants should be applied temporally in particular conditions.

How to fit demand side management (DSM) into current Chinese electricity system reform?

International Nuclear Information System (INIS)

Yu Yongzhen

2012-01-01

DSM is one of the best and most practical policy tools available to China for balancing environmental protection and economic growth. The new round of electricity system reform provides a good opportunity to consolidate and integrate DSM policy and expedite its development and implementation. DSM policy can be upgraded by incorporating it into the current electricity system reform. Comparing the potential acceleration of electricity price reform with the possibility of imposing a System Benefit Charge (SBC), the author argues that support for a SBC would be much easier to gather among policymakers and stakeholders in a short time and would have a much better policy effect in the current situation. The author discusses three kinds of price discrimination related to the DSM development in China: time-based electricity pricing, electricity price discrimination for industrial structure adjustment in China (Fujian Province as a case), and direct power purchases by large customers and preferential tariff policy. These can be well designed to be combined with DSM and energy efficiency policy. - Highlights: ► Elements of DSM have been in place since 1993, but without even and reinforced policy. ► DSM can be upgraded by fitting it into current Chinese electricity system reform. ► Both electricity price reform and SBC would mean increases in electricity payment. ►Imposing SBC is much easier and better than speeding up electricity price reform. ► Three kinds of price discrimination can be well designed to be combined with DSM.

Hierarchically structured catalysts for cascade and selective steam reforming/hydrodeoxygenation reactions.

Science.gov (United States)

Sun, Junming; Karim, Ayman M; Li, Xiaohong Shari; Rainbolt, James; Kovarik, Libor; Shin, Yongsoon; Wang, Yong

2015-12-04

We report a hierarchically structured catalyst with steam reforming and hydrodeoxygenation functionalities being deposited in the micropores and macropores, respectively. The catalyst is highly efficient to upgrade the pyrolysis vapors of pine forest product residual, resulting in a dramatically decreased acid content and increased hydrocarbon yield without external H2 supply.

FEEDSTOCK-FLEXIBLE REFORMER SYSTEM (FFRS) FOR SOLID OXIDE FUEL CELL (SOFC)- QUALITY SYNGAS

Energy Technology Data Exchange (ETDEWEB)

Jezierski, Kelly; Tadd, Andrew; Schwank, Johannes; Kibler, Roland; McLean, David; Samineni, Mahesh; Smith, Ryan; Parvathikar, Sameer; Mayne, Joe; Westrich, Tom; Mader, Jerry; Faubert, F. Michael

2010-07-30

The U.S. Department of Energy National Energy Technology Laboratory funded this research collaboration effort between NextEnergy and the University of Michigan, who successfully designed, built, and tested a reformer system, which produced highquality syngas for use in SOFC and other applications, and a novel reactor system, which allowed for facile illumination of photocatalysts. Carbon and raw biomass gasification, sulfur tolerance of non-Platinum Group Metals (PGM) based (Ni/CeZrO2) reforming catalysts, photocatalysis reactions based on TiO2, and mild pyrolysis of biomass in ionic liquids (ILs) were investigated at low and medium temperatures (primarily 450 to 850 C) in an attempt to retain some structural value of the starting biomass. Despite a wide range of processes and feedstock composition, a literature survey showed that, gasifier products had narrow variation in composition, a restriction used to develop operating schemes for syngas cleanup. Three distinct reaction conditions were investigated: equilibrium, autothermal reforming of hydrocarbons, and the addition of O2 and steam to match the final (C/H/O) composition. Initial results showed rapid and significant deactivation of Ni/CeZrO2 catalysts upon introduction of thiophene, but both stable and unstable performance in the presence of sulfur were obtained. The key linkage appeared to be the hydrodesulfurization activity of the Ni reforming catalysts. For feed stoichiometries where high H2 production was thermodynamically favored, stable, albeit lower, H2 and CO production were obtained; but lower thermodynamic H2 concentrations resulted in continued catalyst deactivation and eventual poisoning. High H2 levels resulted in thiophene converting to H2S and S surface desorption, leading to stable performance; low H2 levels resulted in unconverted S and loss in H2 and CO production, as well as loss in thiophene conversion. Bimetallic catalysts did not outperform Ni-only catalysts, and small Ni particles were

Modernising Education: New Public Management Reform in the Norwegian Education System

Science.gov (United States)

Møller, Jorunn; Skedsmo, Guri

2013-01-01

Since the end of the 1980s, the Norwegian education system has gone through major reform, influenced largely by new managerialist ideas. Strategies to renew the public sector were promoted as the new public management (NPM). This paper investigates the way ideas connected to NPM reforms have been introduced and interpreted in the Norwegian…

Systems, Stakeholders, and Students: Including Students in School Reform

Science.gov (United States)

Zion, Shelley D.

2009-01-01

The education system in the United States is under pressure from a variety of sources to reform and improve the delivery of educational services to students. Change across a system as complex and dynamic as the educational system requires a systemic approach and requires the participation or buy-in of all participants and stakeholders. This…

The link between UHC reforms and health system governance: lessons from Asia.

Science.gov (United States)

Hort, Krishna; Jayasuriya, Rohan; Dayal, Prarthna

2017-05-15

Purpose The purpose of this paper is to examine how and to what extent the design and implementation of universal health coverage (UHC) reforms have been influenced by the governance arrangements of health systems in low- and middle-income countries (LMIC); and how governments in these countries have or have not responded to the challenges of governance for UHC. Design/methodology/approach Comparative case study analysis of three Asian countries with substantial experience of UHC reforms (Thailand, Vietnam and China) was undertaken using data from published studies and grey literature. Studies included were those which described the modifications and adaptations that occurred during design and implementation of the UHC programme, the actors and institutions involved and how these changes related to the governance of the health system. Findings Each country adapted the design of their UHC programmes to accommodate their specific institutional arrangements, and then made further modifications in response to issues arising during implementation. The authors found that these modifications were often related to the impacts on governance of the institutional changes inherent in UHC reforms. Governments varied in their response to these governance impacts, with Thailand prepared to adopt new governance modes (which the authors termed as an "adaptive" response), while China and Vietnam have tended to persist with traditional hierarchical governance modes ("reactive" responses). Originality/value This study addresses a gap in current knowledge on UHC reform, and finds evidence of a complex interaction between substantive health sector reform and governance reform in the LMIC context in Asia, confirming recent similar observations on health reforms in high-income countries.

Sulfur Tolerant Magnesium Nickel Silicate Catalyst for Reforming of Biomass Gasification Products to Syngas

Directory of Open Access Journals (Sweden)

Scott L. Swartz

2012-04-01

Full Text Available Magnesium nickel silicate (MNS has been investigated as a catalyst to convert tars and light hydrocarbons to syngas (CO and H2 by steam reforming and CO2 reforming in the presence of H2S for biomass gasification process at NexTech Materials. It was observed that complete CH4 conversion could be achieved on MNS catalyst granules at 800–900 °C and a space velocity of 24,000 mL/g/h in a simulated biomass gasification stream. Addition of 10–20 ppm H2S to the feed had no apparent impact on CH4 conversion. The MNS-washcoated monolith also showed high activities in converting methane, light hydrocarbons and tar to syngas. A 1200 h test without deactivation was achieved on the MNS washcoated monolith in the presence of H2S and/or NH3, two common impurities in gasified biomass. The results indicate that the MNS material is a promising catalyst for removal of tar and light hydrocarbons from biomass gasified gases, enabling efficient use of biomass to produce power, liquid fuels and valuable chemicals.

The Operation of Vaca Muerta and the Socioeconomic Impact in Neuquén Province. The Case of Añelo. Effects of the National Hydrocarbon Law reform (2014

Directory of Open Access Journals (Sweden)

Adriana Mariel Giuliani

2016-06-01

Full Text Available The economy of the Province of Neuquén is centered in hydrocarbon operation, that represents around 50% of the GDP and affects public budget through royalties income. The decline of oil and gas extraction, verified in Argentina, has caused serious difficulties to the Neuquino State to fulfill its commitments, making Public Debt an inherent variable. The local leadership expectations to reverse this situation are focused on unconventional resources from Vaca Muerta and Los Molles, in the Neuquina Basin. At the same time, the National Government, through YPF, rely on these geological formations development to overcome external restriction.The purpose of this paper is to analyze the impact of the increased activity in the oil and gas sector in Neuquen, deepening our research about the town of Añelo, which became the operating companies main settlement. Another aspect to be addressed will be the legal framework reform process carried out during 2014, in order to point out the effects of the new legislation in the territory, considering that it incorporates instruments to increase investments. Key words: Hydrocarbon, Añelo, Legal Framework. 

Environmental Fiscal Reform and the Double Dividend: Evidence from a Dynamic General Equilibrium Model

Directory of Open Access Journals (Sweden)

Jaume Freire-González

2018-02-01

Full Text Available An environmental fiscal reform (EFR represents a transition of a taxation system toward one based in environmental taxation, rather than on taxation of capital, labor, or consumption. It differs from an environmental tax reform (ETR in that an EFR also includes a reform of subsidies which counteract environmental policy. This research details different ways in which an EFR is not only possible but also a good option that provides economic and environmental benefits. We have developed a detailed dynamic CGE model examining 101 industries and commodities in Spain, with an energy and an environmental extension comprising 31 pollutant emissions, in order to simulate the economic and environmental effects of an EFR. The reform focuses on 39 industries related to the energy, water, transport and waste sectors. We simulate an increase in taxes and a reduction on subsidies for these industries and at the same time we use new revenues to reduce labor, capital and consumption taxes. All revenue recycling options provide both economic and environmental benefits, suggesting that the “double dividend” hypothesis can be achieved. After three to four years after implementing an EFR, GDP is higher than the base case, hydrocarbons consumption declines and all analyzed pollutants show a reduction.

Health system reform in rural China: voices of healthworkers and service-users.

Science.gov (United States)

Zhou, Xu Dong; Li, Lu; Hesketh, Therese

2014-09-01

Like many other countries China is undergoing major health system reforms, with the aim of providing universal health coverage, and addressing problems of low efficiency and inequity. The first phase of the reforms has focused on strengthening primary care and improving health insurance coverage and benefits. The aim of the study was to explore the impacts of these reforms on healthworkers and service-users at township level, which has been the major target of the first phase of the reforms. From January to March 2013 we interviewed eight health officials, 80 township healthworkers and 80 service-users in eight counties in Zhejiang and Yunnan provinces, representing rich and poor provinces respectively. Thematic analysis identified key themes around the impacts of the health reforms. We found that some elements of the reforms may actually be undermining primary care. While the new health insurance system was popular among service-users, it was criticised for contributing to fast-growing medical costs, and for an imbalance of benefits between outpatient and inpatient services. Salary reform has guaranteed healthworkers' income, but greatly reduced their incentives. The essential drug list removed perverse incentives to overprescribe, but led to falls in income for healthworkers, and loss of autonomy for doctors. Serious problems with drug procurement also emerged. The unintended consequences have included a brain drain of experienced healthworkers from township hospitals, and patients have flowed to county hospitals at greater cost. In conclusion, in the short term resources must be found to ensure rural healthworkers feel appropriately remunerated and have more clinical autonomy, measures for containment of the medical costs must be taken, and drug procurement must show increased transparency and accountability. More importantly the study shows that all countries undergoing health reforms should elicit the views of stakeholders, including service-users, to avoid

Upgrading of reformate gas for different applications with focus on small-scale hydrogen production

Energy Technology Data Exchange (ETDEWEB)

Jannasch, Anna-Karin; Silversand, Fredrik [CATATOR AB, Lund (Sweden)

2004-12-01

technique for applications that demand extremely high purity grades, i.e. = 99.999 % H{sub 2}(g), such as for example the electronic industry and the metallurgic industry. For the chemical and the pharmaceutical industry, for which the purity grade demand is somewhat lower (i.e. = 99.5 % H{sub 2}(g)), PSA may also be a choice of consideration. According to the results obtained in this work, S, CO, halogens, ammonia and oxygenated hydrocarbons seems to be the impurities of concern in the case of PEMFC applications. To remove at least S, CO and oxygenated hydrocarbons, Catator's regenerative adsorbents, installed upstream a PROX reactor, seems to be an efficient, compact and non-expensive way for gas-clean-up. For also eliminating components such as CO{sub 2}, N{sub 2} and CH{sub 4}, a PSA or a Pd-alloy membrane have to be used. In the latter cases, the PROX reactor can be eliminated. A disadvantage of using PSA or Pd-alloy membrane units is however that the reformation needs to be carried out at an elevated pressure which in turn results in that the weight of the fuel processor significantly increases. In the case of PSA, a compact so called Fast Cycle PSA is recommended, since conventional PSA systems are today way to large and heavy for being of interest for small-scale hydrogen production. However, Fast Cycle PSA systems for reformate purification are still not commercially available and therefore, still expensive. Furthermore, in order to further examine the suitability of using a Pd-alloy membrane for reformate purification, a relatively non-expensive Pd-Cu membrane has been ordered from the company ATI Wah Change. The membrane will be evaluated in combination with Catator's reformer technology in the beginning of 2005. Coke and S are the critical impurities in the case of SOFC applications.. The coke formation can be suppressed by the use of pre-reforming (internal reforming is assumed). The system can also become more coke-tolerant by exchanging the anode

An estimation of the water balance in a reformer/fuel-cells system

Energy Technology Data Exchange (ETDEWEB)

Jovan, Vladimir [Jo-ef Stefan Institute and Centre of Excellence Low-Carbon Technologies (Slovenia); Cufar, Alja [University of Ljubljana, Faculty of Mathematics and Physics (Slovenia)], e-mail: vladimir.jovan@ijs.si

2011-07-01

PEM fuel cells use hydrogen as fuel. Since it is a very light element, its energy density is small despite its high caloric value. Thus hydrogen storage requires a lot of space. One possible solution is simultaneous production of hydrogen from higher-density materials, such as methanol. The object of this paper is to determine what is the total water balance in a system consisting of a methanol reformer and a fuel-cells-based generator set, and to determine if water should be supplied to, or removed from, the system. Based on relatively little information obtained from technical sources and on some simple assumptions, this paper presents a model which helps to determine the actual water balance in the system. In conclusion, commercially available fuel-cell systems with realistic water production can be used for fuel reforming purposes in the methanol reformer. It is also shown that under normal operating conditions, and using commercially available devices, there is always an excess of water produced.

Improvements of reforming performance of a nuclear heated steam reforming process

International Nuclear Information System (INIS)

Hada, Kazuhiko

1996-10-01

Performance of an energy production process by utilizing high temperature nuclear process heat was not competitive to that by utilizing non-nuclear process heat, especially fossil-fired process heat due to its less favorable chemical reaction conditions. Less favorable conditions are because a temperature of the nuclear generated heat is around 950degC and the heat transferring fluid is the helium gas pressurized at around 4 MPa. Improvements of reforming performance of nuclear heated steam reforming process were proposed in the present report. The steam reforming process, one of hydrogen production processes, has the possibility to be industrialized as a nuclear heated process as early as expected, and technical solutions to resolve issues for coupling an HTGR with the steam reforming system are applicable to other nuclear-heated hydrogen production systems. The improvements are as follows: As for the steam reformer, (1) increase in heat input to process gas by applying a bayonet type of reformer tubes and so on, (2) increase in reforming temperature by enhancing heat transfer rate by the use of combined promoters of orifice baffles, cylindrical thermal radiation pipes and other proposal, and (3) increase in conversion rate of methane to hydrogen by optimizing chemical compositions of feed process gas. Regarding system arrangement, a steam generator and superheater are set in the helium loop as downstream coolers of the steam reformer, so as to effectively utilize the residual nuclear heat for generating feed steam. The improvements are estimated to achieve the hydrogen production rate of approximately 3800 STP-m 3 /h for the heat source of 10 MW and therefore will provide the potential competitiveness to a fossil-fired steam reforming process. Those improvements also provide the compactness of reformer tubes, giving the applicability of seamless tubes. (J.P.N.)

Social Reform Groups and the Legal System: Enforcement Problems. Discussion Paper No. 209-74.

Science.gov (United States)

Handler, Joel F.

During the last two decades, there has been a great increase in the use of litigation by social reform groups. This activity has been stimulated by the hospitality of the courts to the demands of social reform groups and the availability of subsidized young, activist lawyers. The paper examines the uses of the legal system by social reform groups…

Thinking on Sichuan-Chongqing gas pipeline transportation system reform under market-oriented conditions

Science.gov (United States)

Duan, Yanzhi

2017-01-01

The gas pipeline networks in Sichuan and Chongqing (Sichuan-Chongqing) region have formed a fully-fledged gas pipeline transportation system in China, which supports and promotes the rapid development of gas market in Sichuan-Chongqing region. In the circumstances of further developed market-oriented economy, it is necessary to carry out further the pipeline system reform in the areas of investment/financing system, operation system and pricing system to lay a solid foundation for improving future gas production and marketing capability and adapting itself to the national gas system reform, and to achieve the objectives of multiparty participated pipeline construction, improved pipeline transportation efficiency and fair and rational pipeline transportation prices. In this article, main thinking on reform in the three areas and major deployment are addressed, and corresponding measures on developing shared pipeline economy, providing financial support to pipeline construction, setting up independent regulatory agency to enhance the industrial supervision for gas pipeline transportation, and promoting the construction of regional gas trade market are recommended.

Design, construction and implementation of a packed reactor system to study the production of hydrogen by the catalytic reaction of reforming of oxygenated hydrocarbons

International Nuclear Information System (INIS)

Salas Aguilar, Cesar Augusto

2014-01-01

The Laboratorio de Quimica Inorganica of the Universidad de Costa Rica has evaluated the performance of several types of catalysts and supports in steam reforming reactions, using different conditions for synthesis of the same. The construction of a reaction system at laboratory scale is described to improve the conditions of the reforming process compared to previous projects. Catalysts synthesized and characterized are used but providing better disposal through a packed bed reactor. The system has had the necessary instrumentation for proper measurement of the temperature at the entrance and inside the reactor, proper feeding of reactants, flow measurement and sampling and measurement system. The conceptual design of the reactions system presented has taken into account the income of reactants through a peristaltic pump, preheating or vaporization of reagents, income and measurement of carrier gas sampling, take of sampling, flow measurement product, reactor packed and cooler product. The order of each stage is defined and positioning in the entire system. The design of a preheater and a tubular reactor is detailed, taking into account the dimensions and construction materials of each of the pieces. The design is presented in a series of diagrams and then the result of the construction is illustrated by photographs, all work done also has been described. The implementation of the system has described by the coupling of all parties and the respective tests. A basic experimental plan is presented to evaluate the performance of the reaction system, using glycerin as a reactant, demonstrating ability to react and take effective data. Four experiments are performed: vacuum reactor, packed reactor with two types of filling and reactor with an exposed surface cobalt oxide (II) reduced, the gases produced in the reaction are analyzed by gas chromatography. The results are discussed and analyzed, focusing on the overall selectivity of hydrogen relative to methane, and the

Do sealless pumps belong in hydrocarbon processing services?

Energy Technology Data Exchange (ETDEWEB)

Bennett, Shawn L. [Sundyne Corporation, Arvada, CO (Brazil)

2004-07-01

Sealless pump technology seems unimaginable in the hot, dirty and high-pressure world of hydrocarbon processing. Furthermore the high flow rates typical of the industry seem incompatible with sealless pumps. Seals and their environmental controls used in conventional technologies are not immune from these factors making sealless worth another look. In October 2000 the Sealless Centrifugal Pump Specification API 685 was published. This specification lends sealless pumps credibility and emphasizes the proper application of the technology. In many process units seal leaks can be extremely dangerous and costly. The heavy hydrocarbons can auto-ignite and light hydrocarbons will tend to find a source of ignition. The ever-increasing requirements for clean fuels are driving many of the current refinery upgrades. Best Also available control technology requirements and additional focus on Environmental Health and Safety increase the attractiveness of sealless technology to mitigate the hazards associated with seal leaks. Sealless has a place in hydrocarbon processing to eliminate seals, provide mechanical simplification, and ensure personnel/environmental protection. The proper application involves evaluating canned motor/magnetic drive technology, API 685 Guidelines, and vapor pressure versus pump circuit pressure analysis. There are four (4) specific processes where sealless pumps should be targeted: Alkylation, Sulfur Recovery/Hydrotreating, Naphtha Reforming Production, and Neutralization. (author)

Tailored reforming of n-dodecane in an aqueous discharge reactor

KAUST Repository

Zhang, Xuming

2016-03-24

Here, we present an original technical approach to simultaneously produce a tailored synthetic liquid fuel and a syngas. In an aqueous discharge reactor with gaseous bubbles, we reformed an emulsified n-dodecane/water mixture. The higher dielectric permittivity of the mixture facilitates electrical discharges that cause the electron impact dissociation of n-dodecane into alkyl and hydrogen radicals, while the addition of water also provides a steam-reforming environment inside the discharged bubbles. We added methane and carbon dioxide to the system because they dissociate into methyl and oxygen radicals, respectively, which prevent the alkyl-alkyl recombinations that result in the formation of long-chain hydrocarbons (HCs). Thus, we were able to control product selectivity by adding methane to increase the production of short-chain HCs and hydrogen gas or by adding carbon dioxide to increase the production of oxygenated fuels, such as 1-dodecanol. Using gas chromatography and gas chromatography-mass spectrometry we detail the compositions of both the synthetic liquid and the syngas, and we provide conceptual chemical mechanisms to selectively increase the production of oxygenates and that of HCs that are shorter or longer than the base fuel. The basis of this in-liquid discharge for the purpose of fuel reforming has potential applications to advanced engines to control ignition delay time, a continuing focus of study in our lab. © 2016 IOP Publishing Ltd.

Progress and outcomes of health systems reform in the United Arab Emirates: a systematic review.

Science.gov (United States)

Koornneef, Erik; Robben, Paul; Blair, Iain

2017-09-20

The United Arab Emirates (UAE) government aspires to build a world class health system to improve the quality of healthcare and the health outcomes for its population. To achieve this it has implemented extensive health system reforms in the past 10 years. The nature, extent and success of these reforms has not recently been comprehensively reviewed. In this paper we review the progress and outcomes of health systems reform in the UAE. We searched relevant databases and other sources to identify published and unpublished studies and other data available between 01 January 2002 and 31 March 2016. Eligible studies were appraised and data were descriptively and narratively synthesized. Seventeen studies were included covering the following themes: the UAE health system, population health, the burden of disease, healthcare financing, healthcare workforce and the impact of reforms. Few, if any, studies prospectively set out to define and measure outcomes. A central part of the reforms has been the introduction of mandatory private health insurance, the development of the private sector and the separation of planning and regulatory responsibilities from provider functions. The review confirmed the commitment of the UAE to build a world class health system but amongst researchers and commentators opinion is divided on whether the reforms have been successful although patient satisfaction with services appears high and there are some positive indications including increasing coverage of hospital accreditation. The UAE has a rapidly growing population with a unique age and sex distribution, there have been notable successes in improving child and maternal mortality and extending life expectancy but there are high levels of chronic diseases. The relevance of the reforms for public health and their impact on the determinants of chronic diseases have been questioned. From the existing research literature it is not possible to conclude whether UAE health system reforms are

Methanol Reformer System Modeling and Control using an Adaptive Neuro-Fuzzy Inference System approach

DEFF Research Database (Denmark)

Justesen, Kristian Kjær; Ehmsen, Mikkel Præstholm; Andersen, John

2012-01-01

This work presents the experimental study and modelling of a methanol reformer system for a high temperature polymer electrolyte membrane (HTPEM) fuel cell stack. The analyzed system is a fully integrated HTPEM fuel cell system with a DC/DC control output able to be used as e.g. a mobile battery...... charger. The advantages of using a HTPEM methanol reformer is that the high quality waste heat can be used as a system heat input to heat and evaporate the input methanol/water mixture which afterwards is catalytically converted into a hydrogen rich gas usable in the high CO tolerant HTPEM fuel cells....... Creating a fuel cell system able to use a well known and easily distributable liquid fuel such as methanol is a good choice in some applications such as range extenders for electric vehicles as an alternative to compressed hydrogen. This work presents a control strategy called Current Correction...

Simulation study of a PEM fuel cell system fed by hydrogen produced by partial oxidation

Energy Technology Data Exchange (ETDEWEB)

Ozdogan, S [Marmara University, Faculty of Engineering, Istanbul (Turkey); Ersoz, A; Olgun, H [TUBITAK Marmara Research Center, Energy Systems and Environmental Research Institute, Kocaeli (Turkey)

2003-09-01

Within the frame of sustainable development, efficient and clean, if possible zero emission energy production technologies are of utmost importance in various sectors such as utilities, industry, households and transportation. Low-temperature fuel cell systems are suitable for powering transportation systems such as automobiles and trucks in an efficient and low-emitting manner. Proton exchange membrane (PEM) fuel cell systems constitute the most promising low temperature fuel cell option being developed globally. PEM fuel cells generate electric power from air and hydrogen or from a hydrogen rich gas via electrochemical reactions. Water and waste heat are the only by-products of PEM fuel cells. There is great interest in converting current hydrocarbon based common transportation fuels such as gasoline and diesel into hydrogen rich gases acceptable by PEM fuel cells. Hydrogen rich gases can be produced from conventional transportation fuels via various reforming technologies. Steam reforming, partial oxidation and auto-thermal reforming are the three major reforming technologies. In this paper, we discuss the results of a simulation study for a PEM fuel cell with partial oxidation. The Aspen HYSYS 3.1 code has been used for simulation purposes. Two liquid hydrocarbon fuels have been selected to investigate the effect of average molecular weights of hydrocarbons, on the fuel processing efficiency. The overall system efficiency depends on the fuel preparation and fuel cell efficiencies as well as on the heat integration within the system. It is desired to investigate the overall system efficiencies for net electrical power production at 100 kW considering bigger scale transport applications. Results indicate that fuel properties, fuel preparation system operating parameters and PEM fuel cell polarization curve characteristics all affect the overall system efficiency. (authors)

Chemical looping reforming of generator gas

Energy Technology Data Exchange (ETDEWEB)

Mendiara, T.; Jensen, Anker; Glarborg, P.

2010-02-15

The main objective of this work is to investigate the carbon deposition during reforming of hydrocarbons in a Chemical Looping Reformer (CLR). This knowledge is needed to asses the viability of the CLR technology in reforming tar from biomass gasification preserving lighter hydrocarbons and minimizing the carbon formation during the process. Two different setups were used to test the reactivity of the different samples in the conditions of interest for the tar reforming process: 1) Fixed bed flow reactor (FR), and 2) Thermogravimetric analyzer (TGA). In the experiments, the gas atmosphere was switched from reducing to oxidizing atmosphere in every cycle. During the oxidizing cycle, the carrier was regenerated using a mixture of oxygen and nitrogen. Four different oxygen carriers based on nickel (Ni40 and Ni60), manganese (Mn) and ilmenite (Fe) were tested. In the tests, toluene was used to simulate the tars. The Fe and the Mn carrier reacted to a small extent with methane at the highest temperature studied, 800 degrees C. The Ni-carriers did not react at 600 degrees C at first, but they showed some reactivity after having been activated at the higher temperature. Carbon formation occurred with the Ni-carriers, more so with the Ni60 than the Ni40. Ni40, Mn and Fe were activated at the higher temperature. However, Fe showed only low capacity. Ni60 showed no capability of tar reforming. Ni40 showed a high tendency to carbon formation at 800 degrees C, but the formation could be lowered by changing some parameters. Mn formed almost no carbon. Ni40 and Mn were chosen for further studies. Carbon deposition occurred for both Ni40 and Mn, but the amount deposited for Ni40 was about 10 times bigger. Ni40 reacted with the methane and toluene only at 800 degrees C. The conversion over Mn was not as big as for toluene alone. Carbon was formed from carbon monoxide on the Ni40 carrier and on the Mn, but to a much less extent on the latter one. The presence of hydrogen decreased

Stability of hydrocarbon systems at thermobaric conditions corresponding to depth down to 50 km

Science.gov (United States)

Kutcherov, V.; Kolesnikov, A.; Mukhina, E.; Serovaiskii, A.

2017-12-01

Most of the theoretical models show that crude oil stability is limited by the depth of 6-8 km (`oil window'). Commercial discovery of crude oil deposits on the depth more than 10 km in the different petroleum basins worldwide casts doubt on the validity of the above-mentioned theoretical calculations. Therefore, the question at which depth complex hydrocarbon systems could be stable is important not only from fundamental research point of view but has a great practical application. To answer this question a hydrocarbon mixture was investigated under thermobaric conditions corresponding to the conditions of the Earth's lower crust. Experiments were conducted by means of Raman Mössbauer spectroscopy. The results obtained show that the complex hydrocarbon systems could be stable and remain their qualitative and quantitative composition at temperature 320-450 °C and pressure 0.7-1.4 GPa. The oxidizing resistance of hydrocarbon system was tested in the modelled the Earth's crust surrounding. The hydrocarbon system stability at the presence of Fe2O3 strongly confirms that the Earth's crust oxygen fugacity does not influence on petroleum composition. The data obtained broaden our knowledge about the possible range of depths for crude oil and natural gas deposits in the Earth's crust and give us the possibility to revise the depth of petroleum deposits occurrence.

INSTITUTIONAL THEORY OF ECONOMIC REFORMS: BASIC IMPERATIVES

Directory of Open Access Journals (Sweden)

Oleg Sergeevich SUKHAREV

2015-07-01

Full Text Available The ability of institutional economic theory to explain various kinds of economic reforms (changes on the basis of theoretical ideas about the dysfunction of institutions and systems are investigated. A number of classifications of reforms and dysfunctions is introduced and kinds of institutional efficiency of economic systems are defined. Qualitative regularities of various reforms of the twentieth century in different countries are generalized. A number of criteria of effective institutional reforms, capable to lower the depth and the scale of dysfunctions of the functioning economic subsystems is formed. System approach to the analysis of economic systems reforming with underlining the importance of reform “management” factor which defines productivity of economic development is elaborated. Life cycle of institution and economic system in the process of its reforming is presented and correction of J. Hellmann’s model, describing the reforming logic of economy is made.

Competitiveness of shallow water hydrocarbon development projects in Mexico after 2015 actualization of fiscal reforms: Economic benchmark of new production sharing agreement versus typical U.S. federal lease terms

International Nuclear Information System (INIS)

Weijermars, Ruud; Zhai, Jia

2016-01-01

Development of Mexican hydrocarbon reservoirs by foreign operators has become possible under Mexico's new Hydrocarbon Law, effective as per January 2015. Our study compares the economic returns of shallow water fields in the Gulf of Mexico applying the royalty and taxes due under the fiscal regimes of the U.S. and Mexico. The net present value (NPV) of the base case scenario is US$1.4 billion, assuming standard development and production cost (opex, capex), 10% discount rate accounting for the cost of capital and revenues computed using a reference oil price of $75/bbl. The impact on NPV of oil price volatility is accounted for in a sensitivity analysis. The split of the NPV of shallow water hydrocarbon assets between the two contractual parties, contractor and government, in Mexico and the U.S. is hugely different. Our base case shows that for similar field assets, Mexico's production sharing agreement allocates about $1,150 million to the government and $191 million to the contractor, while under U.S. license conditions the government take is about $700 million and contractor take is $553 million. The current production sharing agreement leaves some marginal shallow water fields in Mexico undeveloped for reasons detailed and quantified in our study. - Highlights: •Mexico's Energy Reform opens up the country to foreign petroleum companies. •Contractor and government takes are compared under each jurisdiction. •Contract terms for Mexico are much less favorable than those offered by the U.S.

Serious reform starts with a systemic risk tax

NARCIS (Netherlands)

Perotti, E.

2010-01-01

The recent IMF report to the G20 states that fiscal reforms are essential to recover the costs of the crisis, as well as to contain future risk creation. This column argues that progress on controlling future risk requires a direct tax on systemic risk. This would restore confidence in the ability

Hydrocarbon conversion with an attenuated superactive multimetallic catalytic composite

International Nuclear Information System (INIS)

Antos, G.J.

1981-01-01

Hydrocarbons are converted by contacting them at hydrocarbon conversion conditions with a novel attenuated superactive multimetallic catalytic composite comprising a combination of a catalytically effective amount of a pyrolyzed rhenium carbonyl component with a porous carrier material containing a uniform dispersion of catalytically effective amounts of a platinum group component, which is maintained in the elemental metallic state during the incorporation and pyrolysis of the rhenium carbonyl component, and of an iron component. In a highly preferred embodiment, this novel catalytic composite also contains a catalytically effective amount of a halogen component. The platinum group component, pyrolyzed rhenium carbonyl component, iron component and optional halogen component are preferably present in the multimetallic catalytic composite in amounts, calculated on an elemental basis, corresponding to about 0.01 to about 2 wt. % platinum group metal, about 0.01 to about 5 wt. % rhenium, about 0.005 to about 4 wt. % iron and about 0.1 to about 5 wt. % halogen. A key feature associated with the preparation of the subject catalytic composite is reaction of a rhenium carbonyl complex with a porous carrier material containing a uniform dispersion of an iron component and of a platinum group component maintained in the elemental state, whereby the interaction of the rhenium moiety with the platinum group moiety is maximized due to the platinophilic (i.e., platinum-seeking) propensities of the carbon monoxide ligands associated with the rhenium reagent. A specific example of the type of hydrocarbon conversion process disclosed herein is a process for the catalytic reforming of a low octane gasoline fraction wherein the gasoline fraction and a hydrogen stream are contacted with the attenuated superactive multimetallic catalytic composite at reforming conditions

Background and Effects of Deepening Reform of the Oil and Gas Industry System

Institute of Scientific and Technical Information of China (English)

Wang Zhen

2017-01-01

Under the background of a fourth wave of industrial revolution and a period of worldwide energy transformation,deepening the reforms in the oil and gas industry system is of great significance.After reviewing the achievements and summarizing the problems of the oil and gas industry in China,this paper lays emphasis on the key aspects of this new round of deepening reforms,and holds the position that this reform,based on the implementation of the national energy strategy,covers the entire oil and gas industry chain by liberalizing market access,reforming market mechanisms,and strengthening management.The reform will bring far-reaching effects upon the entire chain and the participants of the oil and gas industry.It wilt help to improve the market-oriented allocation of resources,allow enterprises to interact as competitors,and enhance the national oil and gas security.

An evaluation of systemic reforms of public hospitals: the Sanming model in China.

Science.gov (United States)

Fu, Hongqiao; Li, Ling; Li, Mingqiang; Yang, Chunyu; Hsiao, William

2017-10-01

Low- and middle-income countries (LMICs) have been searching for effective strategies to reform their inefficient and wasteful public hospitals. Recently, China developed a model of systemic reforms called the Sanming model to address the inefficiency and waste at public hospitals. In this article, we explain and evaluate how the Sanming model reformed its 22 public hospitals in 2013 by simultaneously restructuring the hospital governance structure, altering the payment system to hospitals, and realigning physicians' incentives. By employing the difference-in-difference (DID) method and using the hospital-level data from 187 public hospitals in Fujian province, we find that the Sanming model has reduced medical costs significantly without measurably sacrificing clinical quality and productive efficiency. The systemic reform, on average, has reduced the medical care cost per outpatient visit and per inpatient admission by 6.1% (P-value = 0.0445) and 15.4% (P-value transformation of public hospitals, where the governance structure, payment system and physician compensation methods are aligned, are crucial to improving their performance; it holds critical lessons for China and other LMICs. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Mental health care in general practice in the context of a system reform.

NARCIS (Netherlands)

Magnée, T.

2017-01-01

The aim of this thesis was to monitor mental health care in Dutch general practices in recent years. In 2014, a reform of the Dutch mental health care system was introduced. Since this reform, general practitioners (GPs) are expected to only refer patients with a (suspected) psychiatric disorder or

Inhalation of Hydrocarbon Jet Fuel Suppress Central Auditory Nervous System Function.

Science.gov (United States)

Guthrie, O'neil W; Wong, Brian A; McInturf, Shawn M; Reboulet, James E; Ortiz, Pedro A; Mattie, David R

2015-01-01

More than 800 million L/d of hydrocarbon fuels is used to power cars, boats, and jet airplanes. The weekly consumption of these fuels necessarily puts the public at risk for repeated inhalation exposure. Recent studies showed that exposure to hydrocarbon jet fuel produces lethality in presynaptic sensory cells, leading to hearing loss, especially in the presence of noise. However, the effects of hydrocarbon jet fuel on the central auditory nervous system (CANS) have not received much attention. It is important to investigate the effects of hydrocarbons on the CANS in order to complete current knowledge regarding the ototoxic profile of such exposures. The objective of the current study was to determine whether inhalation exposure to hydrocarbon jet fuel might affect the functions of the CANS. Male Fischer 344 rats were randomly divided into four groups (control, noise, fuel, and fuel + noise). The structural and functional integrity of presynaptic sensory cells was determined in each group. Neurotransmission in both peripheral and central auditory pathways was simultaneously evaluated in order to identify and differentiate between peripheral and central dysfunctions. There were no detectable effects on pre- and postsynaptic peripheral functions. However, the responsiveness of the brain was significantly depressed and neural transmission time was markedly delayed. The development of CANS dysfunctions in the general public and the military due to cumulative exposure to hydrocarbon fuels may represent a significant but currently unrecognized public health issue.

Strategies for improving the performance and stability of Ni-based catalysts for reforming reactions.

Science.gov (United States)

Li, Shuirong; Gong, Jinlong

2014-11-07

Owing to the considerable publicity that has been given to petroleum related economic, environmental, and political problems, renewed attention has been focused on the development of highly efficient and stable catalytic materials for the production of chemical/fuel from renewable resources. Supported nickel nanoclusters are widely used for catalytic reforming reactions, which are key processes for generating synthetic gas and/or hydrogen. New challenges were brought out by the extension of feedstock from hydrocarbons to oxygenates derivable from biomass, which could minimize the environmental impact of carbonaceous fuels and allow a smooth transition from fossil fuels to a sustainable energy economy. This tutorial review describes the recent efforts made toward the development of nickel-based catalysts for the production of hydrogen from oxygenated hydrocarbons via steam reforming reactions. In general, three challenges facing the design of Ni catalysts should be addressed. Nickel nanoclusters are apt to sinter under catalytic reforming conditions of high temperatures and in the presence of steam. Severe carbon deposition could also be observed on the catalyst if the surface carbon species adsorbed on metal surface are not removed in time. Additionally, the production of hydrogen rich gas with a low concentration of CO is a challenge using nickel catalysts, which are not so active in the water gas shift reaction. Accordingly, three strategies were presented to address these challenges. First, the methodologies for the preparation of highly dispersed nickel catalysts with strong metal-support interaction were discussed. A second approach-the promotion in the mobility of the surface oxygen-is favored for the yield of desired products while promoting the removal of surface carbon deposition. Finally, the process intensification via the in situ absorption of CO2 could produce a hydrogen rich gas with low CO concentration. These approaches could also guide the design

FOREIGN EXPERIENCE OF PENSION SYSTEM REFORMING AND POSSIBILITY OF ADAPTATION IN UKRAINE

Directory of Open Access Journals (Sweden)

Anastasiia Svyrydovska

2016-11-01

Full Text Available The purpose of the paper is to analyze foreign experience of reforming pension systems. Reforming pension systems around the world is due to the need to balance the cost of social support for people who are growing, with the financial capabilities of the country. Ukraine, like other European countries is facing the crisis of public pensions. One reason – the rapid aging of the population. The experience of some countries shows that the increase in the rates of deductions has a negative impact on employment, leads to a significant increase in public debt, and therefore is unacceptable. Some economists believe that a full transition to retirement savings scheme – a solution. However, this would create an additional burden on public financial systems and current generation of taxpayers. Therefore, it is necessary to determine the main directions of the crisis of pensions. With the economic downturn global scale of the efficiency of the pension system of Ukraine, its compliance with the standards of the welfare state is becoming more acute. That is why there is an urgent need for adaptation based on international experience to review previously proposed ways to reform the pension system of Ukraine. Methodology is actual works of scientists and researchers. Results are exploring the features of the international experience of reforming pension systems and proposition of directions of reform of the pension system of Ukraine on the basis of demographic, social, financial, political and cultural characteristics of its development. Value. Background research finding is due to government regulation mechanisms of social insurance in Ukraine. The most developed social protection system with the EU. Consideration of these specific programs of effective systems of social insurance is an important basis for the analysis of international experience. Decisive impact on the social security system in the EU provides current demographic trends (falling birth

A case study of systemic curricular reform: A forty-year history

Science.gov (United States)

Laubach, Timothy Alan

What follows is a description of the development of a particular inquiry-based elementary school science curriculum program and how its theoretical underpinnings positively influenced a school district's (K-12) science program and also impacted district- and state-wide curriculum reform initiatives. The district's science program has evolved since the inception of the inquiry-based elementary school science curriculum reform forty years ago. Therefore, a historical case study, which incorporated grounded theory methodology, was used to convey the forty-year development of a science curriculum reform effort and its systemic influences. Data for this study were collected primarily through artifacts, such as technical and non-technical documents, and supported and augmented with interviews. Fifteen people comprised the interview consortium with professional responsibilities including (a) administrative roles, such as superintendents, assistant superintendents, principals, and curriculum consultants/coordinators; (b) classroom roles, such as elementary and secondary school teachers who taught science; (c) partnership roles, such as university faculty who collaborated with those in administrative and classroom positions within the district; and (d) the co-director of SCIS who worked with the SCIS trial center director. Data were analyzed and coded using the constant comparative method. The analysis of data uncovered five categories or levels in which the curriculum reform evolved throughout its duration. These themes are Initiation, Education, Implementation, Confirmation, and Continuation. These five categories lead to several working hypotheses that supported the sustaining and continuing of a K-12 science curriculum reform effort. These components are a committed visionary; a theory base of education; forums promoting the education of the theory base components; shared-decision making; a university-school partnership; a core group of committed educators and teachers

Ni-Based Catalysts for Low Temperature Methane Steam Reforming: Recent Results on Ni-Au and Comparison with Other Bi-Metallic Systems

Directory of Open Access Journals (Sweden)

Anna M. Venezia

2013-06-01

Full Text Available Steam reforming of light hydrocarbons provides a promising method for hydrogen production. Ni-based catalysts are so far the best and the most commonly used catalysts for steam reforming because of their acceptably high activity and significantly lower cost in comparison with alternative precious metal-based catalysts. However, nickel catalysts are susceptible to deactivation from the deposition of carbon, even when operating at steam-to-carbon ratios predicted to be thermodynamically outside of the carbon-forming regime. Reactivity and deactivation by carbon formation can be tuned by modifying Ni surfaces with a second metal, such as Au through alloy formation. In the present review, we summarize the very recent progress in the design, synthesis, and characterization of supported bimetallic Ni-based catalysts for steam reforming. The progress in the modification of Ni with noble metals (such as Au and Ag is discussed in terms of preparation, characterization and pretreatment methods. Moreover, the comparison with the effects of other metals (such as Sn, Cu, Co, Mo, Fe, Gd and B is addressed. The differences of catalytic activity, thermal stability and carbon species between bimetallic and monometallic Ni-based catalysts are also briefly shown.

Working on reform. How workers' compensation medical care is affected by health care reform.

Science.gov (United States)

Himmelstein, J; Rest, K

1996-01-01

The medical component of workers' compensation programs-now costing over $24 billion annually-and the rest of the nation's medical care system are linked. They share the same patients and providers. They provide similar benefits and services. And they struggle over who should pay for what. Clearly, health care reform and restructuring will have a major impact on the operation and expenditures of the workers' compensation system. For a brief period, during the 1994 national health care reform debate, these two systems were part of the same federal policy development and legislative process. With comprehensive health care reform no longer on the horizon, states now are tackling both workers' compensation and medical system reforms on their own. This paper reviews the major issues federal and state policy makers face as they consider reforms affecting the relationship between workers' compensation and traditional health insurance. What is the relationship of the workers' compensation cost crisis to that in general health care? What strategies are being considered by states involved in reforming the medical component of workers compensation? What are the major policy implications of these strategies?

Hybrid plasma-catalytic reforming of ethanol aerosol

International Nuclear Information System (INIS)

Solomenko, O.V.; Nedybaliuk, O.A.; Chernyak, V.Ya.; Iukhymenko, V.V.; Veremii, Iu.P.; Iukhymenko, K.V.; Martysh, E.V.; Fedirchyk, I.I.; Demchina, V.P.; Levko, D.S.; Tsymbalyuk, O.M.; Liptuga, A.I.; Dragnev, S.V.

2015-01-01

Hybrid plasma-catalytic reforming of the ethanol aerosol with plasma activation of only the oxidant (air) was studied. Part of the oxidant (∼20%) was activated by means of rotational gliding arc with solid electrodes and injected into the reaction (pyrolytic) chamber as a plasma torch. This part of the oxidant interacted with a mixture of hydrocarbons and the rest of the oxidant (∼80%) in the reaction chamber. Temperature changes in the reaction chamber, the composition of the synthesis-gas and the products of synthesis-gas combustion were analyzed

Processes in petroleum chemistry. Technical and economical characteristics Vol. 1. Synthesis gas and derivatives. Main hydrocarbon intermediaries (2 ed. )

Energy Technology Data Exchange (ETDEWEB)

Chauvel, A.; Lefebvre, G.; Castex, L.

1985-01-01

The aim of this book is to give rudiments for a preliminary study to outline petrochemical operation and cost estimation. Basic operations are examined: Steam reforming or partial oxidation, steam or thermal cracking and catalytic reforming. The main topics examined include: hydrogen purification, hydrogen fabrication from hydrocarbons, carbonaceous materials or water, production of carbon monoxide, ammoniac synthesis methanol synthesis from synthesis gas, preparation of formol, urea, acetylene and monomers for the preparation of plastics.

Putting "The System" into a School Autonomy Reform: The Case of the Independent Public Schools Program

Science.gov (United States)

Gobby, Brad

2016-01-01

The Australian Federal and state governments have been introducing neoliberal reforms to the governance of their education systems for a number of decades. One of the most recent programs of reform is the Western Australian Independent Public Schools (IPS) initiative. Similar to decentralizing reforms around the world, the IPS program seeks…

Market Reform, Programmatic (DeAlignment and Party System Stability in Latin America

Directory of Open Access Journals (Sweden)

Kenneth M. ROBERTS

2013-07-01

Full Text Available Although democratic regimes in Latin America since the early 1980s have been surprisingly durable, party systems in much of the region continue to experience very high levels of electoral instability. A critical juncture approach to institutional change suggests that variation in party system stability is related to the impact of market liberalization in the 1980s and 90s on the programmatic alignment –or (dealignment– of partisan competition. Market reforms that were adopted by conservative leaders and opposed by a major leftist rival aligned party systems programmatically, allowing societal opposition to be channeled into institutionalized forms of competition that were highly stable in the post-adjustment era. By contrast, «bait-and-switch» reforms adopted by populist or leftist leaders were programmatically de-aligning for party systems, leaving them vulnerable to highly destabilizing reactive sequences in the aftermath to the reform process-including mass social protests, the demise of historic conservative parties, and the outflanking of traditional populist or leftist parties by more radical, anti-neoliberal outsiders. The political dynamics of market-based economic adjustment thus heavily conditioned the ways in which party systems would process the post-adjustment revival of populist and leftist alternatives in the region.

Noble gas and hydrocarbon tracers in multiphase unconventional hydrocarbon systems: Toward integrated advanced reservoir simulators

Science.gov (United States)

Darrah, T.; Moortgat, J.; Poreda, R. J.; Muehlenbachs, K.; Whyte, C. J.

2015-12-01

Although hydrocarbon production from unconventional energy resources has increased dramatically in the last decade, total unconventional oil and gas recovery from black shales is still less than 25% and 9% of the totals in place, respectively. Further, the majority of increased hydrocarbon production results from increasing the lengths of laterals, the number of hydraulic fracturing stages, and the volume of consumptive water usage. These strategies all reduce the economic efficiency of hydrocarbon extraction. The poor recovery statistics result from an insufficient understanding of some of the key physical processes in complex, organic-rich, low porosity formations (e.g., phase behavior, fluid-rock interactions, and flow mechanisms at nano-scale confinement and the role of natural fractures and faults as conduits for flow). Noble gases and other hydrocarbon tracers are capably of recording subsurface fluid-rock interactions on a variety of geological scales (micro-, meso-, to macro-scale) and provide analogs for the movement of hydrocarbons in the subsurface. As such geochemical data enrich the input for the numerical modeling of multi-phase (e.g., oil, gas, and brine) fluid flow in highly heterogeneous, low permeability formations Herein we will present a combination of noble gas (He, Ne, Ar, Kr, and Xe abundances and isotope ratios) and molecular and isotopic hydrocarbon data from a geographically and geologically diverse set of unconventional hydrocarbon reservoirs in North America. Specifically, we will include data from the Marcellus, Utica, Barnett, Eagle Ford, formations and the Illinois basin. Our presentation will include geochemical and geological interpretation and our perspective on the first steps toward building an advanced reservoir simulator for tracer transport in multicomponent multiphase compositional flow (presented separately, in Moortgat et al., 2015).

Plasma-catalytic reforming of ethanol: influence of air activation rate and reforming temperature

International Nuclear Information System (INIS)

Nedybaliuk, O.A.; Chernyak, V.Ya.; Fedirchuk, I.I.; Demchina, V.P.; Bortyshevsky, V.A.; Korzh, R.V.

2016-01-01

This paper presents the study of the influence that air activation rate and reforming temperature have on the gaseous products composition and conversion efficiency during the plasma-catalytic reforming of ethanol. The analysis of product composition showed that the conversion efficiency of ethanol has a maximum in the studied range of reforming temperatures. Researched system provided high reforming efficiency and high hydrogen energy yield at the lower temperatures than traditional conversion technologies

Thermodynamic performance analysis of a fuel cell trigeneration system integrated with solar-assisted methanol reforming

International Nuclear Information System (INIS)

Wang, Jiangjiang; Wu, Jing; Xu, Zilong; Li, Meng

2017-01-01

Highlights: • Propose a fuel cell trigeneration system integrated with solar-assisted methanol reforming. • Optimize the reaction parameters of methanol steam reforming. • Present the energy and exergy analysis under design and off-design work conditions. • Analyze the contributions of solar energy to the trigeneration system. - Abstract: A solar-assisted trigeneration system for producing electricity, cooling, and heating simultaneously is an alternative scheme to improve energy efficiency and boost renewable energy. This paper proposes a phosphoric acid fuel cell trigeneration system integrated with methanol and steam reforming assisted by solar thermal energy. The trigeneration system consists of a solar heat collection subsystem, methanol steam reforming subsystem, fuel cell power generation subsystem, and recovered heat utilization subsystem. Their respective thermodynamic models are constructed to simulate the system input/output characteristics, and energy and exergy efficiencies are employed to evaluate the system thermodynamic performances. The contribution of solar energy to the system is analyzed using solar energy/exergy share. Through the simulation and analysis of methanol and steam reforming reactions, the optimal reaction pressure, temperature, and methanol to water ratio are obtained to improve the flow rate and content of produced hydrogen. The thermodynamic simulations of the trigeneration system show that the system energy efficiencies at the summer and winter design work conditions are 73.7% and 51.7%, while its exergy efficiencies are 18.8% and 26.1%, respectively. When the solar radiation intensity is different from the design work condition, the total energy and exergy efficiencies in winter decrease approximately by 4.7% and 2.2%, respectively, due to the decrease in solar heat collection efficiency. This proposed novel trigeneration system complemented by solar heat energy and methanol chemical energy is favorable for improving the

Four proposals for market-based health care system reform.

Science.gov (United States)

Sumner, W

1994-08-01

A perfectly free, competitive medical market would not meet many social goals, such as universal access to health care. Micromanagement of interactions between patients and providers does not guarantee quality care and frequently undermines that relationship, to the frustration of all involved. Furthermore, while some North American health care plans are less expensive than others, none have reduced the medical inflation rate to equal the general inflation rate. Markets have always fixed uneven inflation rates in other domains. The suggested reforms could make elective interactions between patients and providers work more like a free market than did any preceding system. The health and life insurance plan creates cost-sensitive consumers, informed by a corporation with significant research incentives and abilities. The FFEB proposal encourages context-sensitive pricing, established by negotiation processes that weigh labor and benefit. Publication of providers' expected outcomes further enriches the information available to consumers and may reduce defensive medicine incentives. A medical career ladder would ease entry and exit from medical professions. These and complementary reforms do not specifically cap spending yet could have a deflationary impact on elective health care prices, while providing incentives to maintain quality. They accomplish these ends by giving more responsibility, information, incentives, and choice to citizens. We could provide most health care in a marketlike environment. We can incorporate these reforms in any convenient order and allow them to compete with alternative schemes. Our next challenge is to design, implement, and evaluate marketlike health care systems.

The Dynamics of Reforming the Public Administration System in Ukraine: Monitoring and Analysis of Implementation of the Reform of Decentralization of Power

Directory of Open Access Journals (Sweden)

Yaroshenko Igor V.

2017-11-01

Full Text Available The European integration choice of Ukraine, enshrined in the Association Agreement between Ukraine and the European Union, has defined the strategic direction of the country’s development for the near future. One of the main directions of the country modernization is the reform of administrative-territorial, political, public administration systems and establishment of the democratic institution of public power – the local self-government. Formation of foundations and principles of reforming the local self-government and territorial organization of power in Ukraine in accordance with the basic provisions of the European Charter of local self-government is an integral part of the national legislation in this sphere. Carrying out monitoring and analysis of the implementation of the reform of decentralization in Ukraine, as well as assessment of the level of its implementation and efficiency of functioning, identification of problematic issues and risks of implementation of the decentralization reform are very important for timely provision of recommendations for the appropriate solutions.

[A health system's neoliberal reform: evidence from the Mexican case].

Science.gov (United States)

López-Arellano, Oliva; Jarillo-Soto, Edgar C

2017-07-27

This study addressed the shaping of Mexico's health system in recent years, with an analysis of the social determination conditioning the system's current formulation, the consequences for the population's living and working conditions, and the technical and legal reform measures that shaped the system's transformation. The article then analyzes the survival of social security institutions and the introduction of an individual insurance model and its current implications and consequences. From the perspective of the right to health, the article compares the measures, resources, and interventions in both health care models and highlights the relevance of the social security system for Popular Insurance. The article concludes that the measures implemented to reform the Mexican health system have failed to achieve the intended results; on the contrary, they have led to a reduction in interventions, rising costs, and a decrease in the installed capacity and professional personnel for the system's operation, thus falling far short of solving the problem, rather aggravating the inequities without solving the system's structural contradictions. Health systems face new challenges, inevitably requiring that the analyses be situated in a broader framework rather than merely focusing on the functional, administrative, and financial operation of the systems in the respective countries.

Indonesia - Country Procurement Assessment Report : Reforming the Public Procurement System

OpenAIRE

World Bank

2001-01-01

The main objectives of the Country Procurement Assessment Review (CPAR) are to diagnose the public procurement system in Indonesia, assess actual compliance with the country's procurement laws and regulations on the ground, and identify reforms to improve the existing system in line with internationally accepted principles. Section 1 gives an overview. Section 2 describes Indonesia's exist...

Syn-Rift Systems of East Godavari Sub Basin: Its Evolution and Hydrocarbon Prospectivity

Science.gov (United States)

Dash, J., Jr.; Zaman, B.

2014-12-01

Krishna Godavari (K.G.) basin is a passive margin basin developed along the Eastern coast of India. This basin has a polyhistoric evolution with multiple rift systems. Rift basin exploration has provided the oil and gas industry with almost one third of discovered global hydrocarbon resources. Understanding synrift sequences, their evolution, depositional styles and hydrocarbon prospectivity has become important with recent discovery of the wells, G-4-6,YS-AF and KG-8 in the K.G. offshore basin. The East Godavari subbasin is a hydrocarbon producing basin from synrift and pre-rift sediments, and hence this was selected as the study area for this research. The study has been carried out by utilizing data of around 58 wells (w1-w58) drilled in the study area 25 of which are hydrocarbon bearing with organic thickness varying from 200 m to 600 m. Age data generated by palaentology and palynology studies have been utilized for calibration of key well logs to differentiate between formations within prerift and synrift sediments. The electrologs of wells like resistivity, gamma ray, neutron, density and sonic logs have been utilized for correlation of different formations in all the drilled wells. The individual thicknesses of sand, shale and coal in the formations have been calculated and tabulated. For Golapalli formation, the isopach and isolith maps were generated which revealed that there were four depocentres with input from the north direction. Schematic geological cross sections were prepared using the well data and seismic data to understand the facies variation across the basin. The sedimentological and petrophysical analysis reports and electro log suites were referred to decipher the environment of deposition, the reservoir characteristics, and play types. The geochemical reports [w4 (Tmax)= 455-468 °C; w1 (Tmax) = 467-514 °C; w4(VRO)= 0.65-0.85; w1(VRO)= 0.83-1.13] revealed the source facies, its maturation and migration timings i.e. the petroleum systems

Interactions of selected policy-stakeholder groups implementing middle school science standards-based systemic reform

Science.gov (United States)

Boydston, Theodore Lewis, III

1999-12-01

This research is an interpretive inquiry into the views and interactions of stakeholders in a district office of a large school system responsible for implementing science systemic reform. Three major sources of data were used in this research: surveys, stakeholder interviews, and autobiographical reflection on experiences as part of the reform initiative. This is an emergent research that is evident in the shift in the focus of research questions and their supporting assumptions during the research. The literature review describes standards-based reform, arguments about reform, and the major dimensions of reform research. The results of the survey of stakeholders revealed that the views among the stakeholder groups followed the system hierarchy and could be separated into two large groups; staff responsible for implementing the reform initiative and the other stakeholder groups. Each of these groups was composed of identifiable subgroups. The interviews with stakeholders revealed how their different attitudes, values, and beliefs frame the context of stakeholder interactions. An over reliance on an authoritarian view of decision-making leaves many stakeholders feeling disempowered and critical of others. This atmosphere promotes blaming, which inhibits collegial interaction. Work experiences in the district office revealed how stakeholders' unaddressed assumptions, attitudes, and beliefs promote fragmentation and competition rather than cooperation. Hidden assumptions about management by control and mandate, competition, and teaching and learning appear to restrain the interactions of stakeholders. Support of the National Science Education Standards was identified as a unifying view among the stakeholders, yet the professional development program focused on content and pedagogical knowledge without addressing stakeholder concerns and beliefs about the intended constructivist framework of the program. Stakeholders' attitudes about the issue of equity demonstrated

Life cycle inventory analysis of hydrogen production by the steam-reforming process: comparison between vegetable oils and fossil fuels as feedstock

International Nuclear Information System (INIS)

Marquevich, M.; Sonnemann, G.W.; Castells, F.; Montane, D.

2002-01-01

A life cycle inventory analysis has been conducted to assess the environmental load, specifically CO 2 (fossil) emissions and global warming potential (GWP), associated to the production of hydrogen by the steam reforming of hydrocarbon feedstocks (methane and naphtha) and vegetable oils (rapeseed oil, soybean oil and palm oil). Results show that the GWPs associated with the production of hydrogen by steam reforming in a 100 years time frame are 9.71 and 9.46 kg CO 2 -equivalent/kg H 2 for natural gas and naphtha, respectively. For vegetable oils, the GWP decreases to 6.42 kg CO 2 -equivalent/kg H 2 for rapeseed oil, 4.32 for palm oil and 3.30 for soybean oil. A dominance analysis determined that the part of the process that has the largest effect on the GWP is the steam reforming reaction itself for the fossil fuel-based systems, which accounts for 56.7% and 74% of the total GWP for natural gas and naphtha, respectively. This contribution is zero for vegetable oil-based systems, for which harvesting and oil production are the main sources of CO 2 -eq emissions.(author)

The voluntary fulfillment of the taxes payment as reformative institution of Venezuelan tax system

Directory of Open Access Journals (Sweden)

Jose Guillermo Garcia

2007-07-01

Full Text Available A consensus between the reformers of the public administration exists on a matter that changes are not decreed, but that these require, for their effective fulfillment of certain conditions, like stimulation of actors affected by the reforms, to recognize the new scenario like favorable and therefore, to act in its name. Under this premise, this paper analyzes the voluntary fulfillment of the taxes payment as reformative institution of the Venezuelan tax system, which has implied the development of a formal incentives structure promoting the initiative of conscious tax payment.

Dispersion, sorption and photodegradation of petroleum hydrocarbons in dispersant-seawater-sediment systems.

Science.gov (United States)

Zhao, Xiao; Liu, Wen; Fu, Jie; Cai, Zhengqing; O'Reilly, S E; Zhao, Dongye

2016-08-15

This work examined effects of model oil dispersants on dispersion, sorption and photodegradation of petroleum hydrocarbons in simulated marine systems. Three dispersants (Corexit 9500A, Corexit 9527A and SPC 1000) were used to prepare dispersed water accommodated oil (DWAO). While higher doses of dispersants dispersed more n-alkanes and PAHs, Corexit 9500A preferentially dispersed C11-C20 n-alkanes, whereas Corexit 9527A was more favorable for smaller alkanes (C10-C16), and SPC 1000 for C12-C28 n-alkanes. Sorption of petroleum hydrocarbons on sediment was proportional to TPH types/fractions in the DWAOs. Addition of 18mg/L of Corexit 9500A increased sediment uptake of 2-3 ring PAHs, while higher dispersant doses reduced the uptake, due to micelle-enhanced solubilization effects. Both dispersed n-alkanes and PAHs were susceptible to photodegradation under simulated sunlight. For PAHs, both photodegradation and photo-facilitated alkylation were concurrently taking place. The information can facilitate sounder assessment of fate and distribution of dispersed oil hydrocarbons in marine systems. Copyright © 2016 Elsevier Ltd. All rights reserved.

Aspects of financial history in Romania. Reform and reformers. The financial tax reform accomplished BY Nicolae Titulescu

Directory of Open Access Journals (Sweden)

Ciobanu, R.

2012-01-01

Full Text Available This paper presents a brief history of the financial reform designed by Nicolae Titulescu at the beginning of the 1920’s. His tax reform law was formulated after thorough research of other European tax systems. He tried to implement it while he was Minister of Finance. Even though the law was adopted, it was never enacted. It met a certain amount of controversy in the Assembly of Deputies. The analysis made also tries to explain the cedular tax system.

Identifying Factors Influencing the Establishment of a Health System Reform Plan in Iran's Public Hospitals

Directory of Open Access Journals (Sweden)

Rasul Fani khiavi

2016-09-01

Full Text Available In today's world, health views have found a wider perspective in which non-medical expectations are particularly catered to. The health system reform plan seeks to improve society's health, decrease treatment costs, and increase patient satisfaction. This study investigated factors affecting the successful establishment of a health system reform plan. A mixed qualitative – quantitative approach was applied to conduct to explore influential factors associated with the establishment of a health system reform plan in Iran's public hospitals. The health systems and approaches to improving them in other countries have been studied. A Likert-based five-point questionnaire was the measurement instrument, and its content validity based on content validity ratio (CVR was 0.87. The construct validity, calculated using the factorial analysis and Kaiser Mayer Olkin (KMO techniques, was 0.964, which is a high level and suggests a correlation between the scale items. To complete the questionnaire, 185 experts, specialists, and executives of Iran’s health reform plan were selected using the Purposive Stratified Non Random Sampling and snowball methods. The data was then analyzed using exploratory factorial analysis and SPSS and LISREL software applications. The results of this research imply the existence of a pattern with a significant and direct relationship between the identified independent variables and the dependent variable of the establishment of a health system reform plan. The most important indices of establishing a health system reform plan, in the order of priority, were political support; suitable proportion and coverage of services presented in the society; management of resources; existence of necessary infrastructures; commitment of senior managers; constant planning, monitoring, and evaluation; and presentation of feedback to the plan's executives, intrasector/extrasector cooperation, and the plan’s guiding committee. Considering the

Design, validation, and use of an evaluation instrument for monitoring systemic reform

Science.gov (United States)

Scantlebury, Kathryn; Boone, William; Butler Kahle, Jane; Fraser, Barry J.

2001-08-01

Over the past decade, state and national policymakers have promoted systemic reform as a way to achieve high-quality science education for all students. However, few instruments are available to measure changes in key dimensions relevant to systemic reform such as teaching practices, student attitudes, or home and peer support. Furthermore, Rasch methods of analysis are needed to permit valid comparison of different cohorts of students during different years of a reform effort. This article describes the design, development, validation, and use of an instrument that measures student attitudes and several environment dimensions (standards-based teaching, home support, and peer support) using a three-step process that incorporated expert opinion, factor analysis, and item response theory. The instrument was validated with over 8,000 science and mathematics students, taught by more than 1,000 teachers in over 200 schools as part of a comprehensive assessment of the effectiveness of Ohio's systemic reform initiative. When the new four-factor, 20-item questionnaire was used to explore the relative influence of the class, home, and peer environment on student achievement and attitudes, findings were remarkably consistent across 3 years and different units and methods of analysis. All three environments accounted for unique variance in student attitudes, but only the environment of the class accounted for unique variance in student achievement. However, the class environment (standards-based teaching practices) was the strongest independent predictor of both achievement and attitude, and appreciable amounts of the total variance in attitudes were common to the three environments.

Fuel upgrading and reforming with metal organic framework

KAUST Repository

Eddaoudi, Mohamed

2016-03-31

Systems and methods for separating hydrocarbons on an internal combustion powered vehicle via one or more metal organic frameworks are disclosed. Systems and methods can further include utilizing separated hydrocarbons and exhaust to generate hydrogen gas for use as fuel. In one aspect, a method for separating hydrocarbons can include contacting a first component containing a first metal organic framework with a flow of hydrocarbons and separating hydrocarbons by size. In certain embodiments, the hydrocarbons can include alkanes.

Reforming science: methodological and cultural reforms.

Science.gov (United States)

Casadevall, Arturo; Fang, Ferric C

2012-03-01

Contemporary science has brought about technological advances and an unprecedented understanding of the natural world. However, there are signs of dysfunction in the scientific community as well as threats from diverse antiscience and political forces. Incentives in the current system place scientists under tremendous stress, discourage cooperation, encourage poor scientific practices, and deter new talent from entering the field. It is time for a discussion of how the scientific enterprise can be reformed to become more effective and robust. Serious reform will require more consistent methodological rigor and a transformation of the current hypercompetitive scientific culture.

Hydrogen from methanol for fuel cells in mobile systems: development of a compact reformer

Energy Technology Data Exchange (ETDEWEB)

Hoehlein, B [Forschungszentrum Juelich GmbH (Germany); Boe, M [H. Topsoee A/S, Lyngby (Denmark); Boegild-Hansen, J [H. Topsoee A/S, Lyngby (Denmark); Broeckerhoff, P [Forschungszentrum Juelich GmbH (Germany); Colsman, G [Forschungszentrum Juelich GmbH (Germany); Emonts, B [Forschungszentrum Juelich GmbH (Germany); Menzer, R [Forschungszentrum Juelich GmbH (Germany); Riedel, E

1996-07-01

On-board generation of hydrogen from methanol with a reformer in connection with the use of a proton-exchange membrane fuel cell (PEMFC) is an attractive option for a passenger car drive. Special considerations are required to obtain low weight and volume. Furthermore, the PEMFC of today cannot tolerate more than 10 ppm of carbon monoxide in the fuel. Therefore a gas conditioning step is needed after the methanol reformer. Our main research activities focus on the conceptual design of a drive system for a passenger car with methanol reformer and PEMFC: Engineering studies with regard to different aspects of this design including reformer, catalytic burner, gas conditioning, balances of the fuel cycles and basic design of a compact methanol reformer. The work described here was carried out within the framework of a JOULE II project of the European Union (1993-1995). Extensive experimental studies have been carried out at the Forschungszentrum Juelich GmbH (KFA) in Germany and at Haldor Topsoee A/S in Denmark. (orig.)

Reforming of Liquid Hydrocarbons in a Novel Hydrogen-Selective Membrane-Based Fuel Processor

Energy Technology Data Exchange (ETDEWEB)

Shamsuddin Ilias

2006-03-10

In this work, asymmetric dense Pd/porous stainless steel composite membranes were fabricated by depositing palladium on the outer surface of the tubular support. The electroless plating method combined with an osmotic pressure field was used to deposit the palladium film. Surface morphology and microstructure of the composite membranes were characterized by SEM and EDX. The SEM and EDX analyses revealed strong adhesion of the plated pure palladium film on the substrate and dense coalescence of the Pd film. Membranes were further characterized by conducting permeability experiments with pure hydrogen, nitrogen, and helium gases at temperatures from 325 to 450 C and transmembrane pressure differences from 5 to 45 psi. The permeation results showed that the fabricated membranes have both high hydrogen permeability and selectivity. For example, the hydrogen permeability for a composite membrane with a 20 {micro}m Pd film was 3.02 x 10{sup -5} moles/m{sup 2}.s.Pa{sup 0.765} at 450 C. Hydrogen/nitrogen selectivity for this composite membrane was 1000 at 450 C with a transmembrane pressure difference of 14.7 psi. Steam reforming of methane is one of the most important chemical processes in hydrogen and syngas production. To investigate the usefulness of palladium-based composite membranes in membrane-reactor configuration for simultaneous production and separation of hydrogen, steam reforming of methane by equilibrium shift was studied. The steam reforming of methane using a packed-bed inert membrane tubular reactor (PBIMTR) was simulated. A two-dimensional pseudo-homogeneous reactor model with parallel flow configuration was developed for steam reforming of methane. The shell volume was taken as the feed and sweep gas was fed to the inside of the membrane tube. Radial diffusion was taken into account for concentration gradient in the radial direction due to hydrogen permeation through the membrane. With appropriate reaction rate expressions, a set of partial differential

Mixed reforming of simulated gasoline to hydrogen in a BSCFO membrane reactor

Energy Technology Data Exchange (ETDEWEB)

Zhu, Wenliang; Han, Wei; Xiong, Guoxing; Yang, Weishen [State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, P.O. Box 110, Dalian 116023 (China)

2006-10-30

Currently, fuel cells are receiving more and more attention as the most promising new power generation technology, and fuel processing by the mixed reforming of liquid hydrocarbons (MRL) with water and oxygen is regarded as a desirable way for fuel cells. In this paper, we developed a new mixed reforming method for hydrogen production by combining a dense ceramic membrane Ba{sub 0.5}Sr{sub 0.5}Co{sub 0.8}Fe{sub 0.2}O{sub 3-{delta}}(BSCFO) with a catalyst LiLaNiO/{gamma}-Al{sub 2}O{sub 3} in a membrane reactor and reforming a simulated gasoline. During a 500-h long-term test at optimized reaction conditions, all the components in the simulated gasoline converted completely, and around 90% selectivity of CO, around 95% selectivity of H{sub 2} and around 8.0mLcm{sup -2}min{sup -1} oxygen permeation flux were achieved. This provides a new optional way of hydrogen production for fuel cells. (author)

Enhanced bioremediation of hydrocarbon-contaminated soil using pilot-scale bioelectrochemical systems

International Nuclear Information System (INIS)

Lu, Lu; Yazdi, Hadi; Jin, Song; Zuo, Yi; Fallgren, Paul H.; Ren, Zhiyong Jason

2014-01-01

Highlights: • Pilot bioelectrochemical system showed high-performance hydrocarbon remediation. • Radius of influence characterization demonstrated system efficacy. • Current serves as degradation indicator. - Abstract: Two column-type bioelectrochemical system (BES) modules were installed into a 50-L pilot scale reactor packed with diesel-contaminated soils to investigate the enhancement of passive biodegradation of petroleum compounds. By using low cost electrodes such as biochar and graphite granule as non-exhaustible solid-state electron acceptors, the results show that 82.1–89.7% of the total petroleum hydrocarbon (TPH) was degraded after 120 days across 1–34 cm radius of influence (ROI) from the modules. This represents a maximum of 241% increase of biodegradation compared to a baseline control reactor. The current production in the BESs correlated with the TPH removal, reaching the maximum output of 70.4 ± 0.2 mA/m 2 . The maximum ROI of the BES, deducting influence from the baseline natural attenuation, was estimated to be more than 90 cm beyond the edge of the reactor (34 cm), and exceed 300 cm should a non-degradation baseline be used. The ratio of the projected ROI to the radius of BES (ROB) module was 11–12. The results suggest that this BES can serve as an innovative and sustainable technology for enhanced in situ bioremediation of petroleum hydrocarbons in large field scale, with additional benefits of electricity production and being integrated into existing field infrastructures

Enhanced bioremediation of hydrocarbon-contaminated soil using pilot-scale bioelectrochemical systems

Energy Technology Data Exchange (ETDEWEB)

Lu, Lu; Yazdi, Hadi [Department of Civil, Environmental, and Architectural Engineering, University of Colorado Boulder, Boulder, CO (United States); Jin, Song [Department of Civil and Architectural Engineering, University of Wyoming, Laramie, WY (United States); Zuo, Yi [Chevron Energy Technology Company, San Ramon, CA (United States); Fallgren, Paul H. [Department of Civil Engineering, University of Colorado Denver, Denver, CO (United States); Ren, Zhiyong Jason, E-mail: jason.ren@colorado.edu [Department of Civil, Environmental, and Architectural Engineering, University of Colorado Boulder, Boulder, CO (United States); Department of Civil Engineering, University of Colorado Denver, Denver, CO (United States)

2014-06-01

Highlights: • Pilot bioelectrochemical system showed high-performance hydrocarbon remediation. • Radius of influence characterization demonstrated system efficacy. • Current serves as degradation indicator. - Abstract: Two column-type bioelectrochemical system (BES) modules were installed into a 50-L pilot scale reactor packed with diesel-contaminated soils to investigate the enhancement of passive biodegradation of petroleum compounds. By using low cost electrodes such as biochar and graphite granule as non-exhaustible solid-state electron acceptors, the results show that 82.1–89.7% of the total petroleum hydrocarbon (TPH) was degraded after 120 days across 1–34 cm radius of influence (ROI) from the modules. This represents a maximum of 241% increase of biodegradation compared to a baseline control reactor. The current production in the BESs correlated with the TPH removal, reaching the maximum output of 70.4 ± 0.2 mA/m{sup 2}. The maximum ROI of the BES, deducting influence from the baseline natural attenuation, was estimated to be more than 90 cm beyond the edge of the reactor (34 cm), and exceed 300 cm should a non-degradation baseline be used. The ratio of the projected ROI to the radius of BES (ROB) module was 11–12. The results suggest that this BES can serve as an innovative and sustainable technology for enhanced in situ bioremediation of petroleum hydrocarbons in large field scale, with additional benefits of electricity production and being integrated into existing field infrastructures.

Changes in direct and indirect taxation in the process of the EU tax system reform

Directory of Open Access Journals (Sweden)

Miletić Vesna

2015-01-01

Full Text Available Proceeding from the changes in direct and indirect taxation in the process of the EU tax system reform and the fact that new trends bring about vital social changes, the research in this area could add to the understanding of economic development of these countries. In the EU with its decentralized tax policy, changes in direct and indirect taxation are permanently implemented in the process of tax system reform. Harmonization of direct and indirect taxation in the EU is conducted by means of the adopted community law regulations. In the harmonization of direct taxation there is a tendency towards an increase of the level of fiscal coordination and elimination of barriers to the common market. Thus direct taxation reforms are limited to achieving higher level of coordination and preventing evasion and double taxation. The current policy is the result of the principle according to which fiscal competition has positive effects on reducing consumption and on the EU economic development. In the harmonization process the systems of indirect taxation are aligned particularly with excise duty and value added tax. Fiscal strategies in the reform process are mostly aimed at fiscal coordination, modernization, informative cooperation, evasion reduction and elimination of malpractices in fulfilling a VAT payment liability. Within the excise tax system minimal excise rates are determined and an environmentally-friendly policy is pursued. The main priorities of taxation changes within the harmonization process are in respect of evasion reduction and irrational fiscal competition on the EU market. A study of direct and indirect taxation changes in the process of the tax system reform is highly significant both from the aspect of efficient tax-system functioning, which results in achieving EU macroeconomic goals, and from the aspect of single states' interests in the process of transition and accession.

Thermodynamic analysis of hydrocarbon refrigerants-based ethylene BOG re-liquefaction system

Science.gov (United States)

Beladjine, Boumedienne M.; Ouadha, Ahmed; Addad, Yacine

2016-09-01

The present study aims to make a thermodynamic analysis of an ethylene cascade re-liquefaction system that consists of the following two subsystems: a liquefaction cycle using ethylene as the working fluid and a refrigeration cycle operating with a hydrocarbon refrigerant. The hydrocarbon refrigerants considered are propane (R290), butane (R600), isobutane (R600a), and propylene (R1270). A computer program written in FORTRAN is developed to compute parameters for characteristic points of the cycles and the system's performance, which is determined and analyzed using numerical solutions for the refrigerant condensation temperature, temperature in tank, and temperature difference in the cascade condenser. Results show that R600a gives the best performance, followed by (in order) R600, R290, and R1270. Furthermore, it is found that an increase in tank temperature improves system performance but that an increase in refrigerant condensation temperature causes deterioration. In addition, it is found that running the system at a low temperature difference in the cascade condenser is advantageous.

Reforming EIA systems: A critical review of proposals in Brazil

Energy Technology Data Exchange (ETDEWEB)

Fonseca, Alberto, E-mail: albertof@em.ufop.br [Federal University of Ouro Preto, Minas Gerais (Brazil); Sánchez, Luis Enrique [University of São Paulo, São Paulo (Brazil); Ribeiro, José Claudio Junqueira [Escola Superior Dom Helder Câmara, Belo Horizonte, Minas Gerais (Brazil)

2017-01-15

Environmental Impact Assessment (EIA) systems are under pressure in many countries, driven by a call for efficiency and streamlining. Such a phenomenon is particularly clear in Brazil, where, in the past few years, a number of influential associations put forward documents proposing significant changes to environmental licensing and impact assessment regulations. So far, there is no publicly available information about any initiative towards scrutinizing those proposals. The objective of this study was to critically review the merits and drawbacks of the changes proposed in those documents. The analysis triangulated content analysis, focus group and online survey data. The focus group included ten seasoned Brazilian EIA specialists; the survey, based on Likert-scale and open-ended questions, resulted in 322 valid responses from EIA professionals. Results show that the proposals generally agree that the current EIA system, while playing a key role in mitigating impacts and enhancing project design, needs many changes. Nonetheless, the proposals neither offered solutions to overcome political, technical and budget barriers, nor established a sense of priority of the most urgent issues. Findings from the focus group and the survey signaled that a number of proposed actions might face public outcry, and that those changes that do not depend on legislative action are more likely to be implementable. Previous studies about EIA reform focused mostly on the context of developed countries after changes had taken place. This study, while addressing the perspective of a large developing country in a “before-reform” stage, shows that capacity-building is a key requirement in EIA reform. - Highlights: • Brazil's EIA system is under strong pressure for change. • Findings corroborate ineffectiveness in current system. • There are tensions as to the best approaches to overcome problems. • Exact effects of proposals are uncertain. • Low institutional capacity can

Natural gas pricing reform in China: Getting closer to a market system?

International Nuclear Information System (INIS)

Paltsev, Sergey; Zhang, Danwei

2015-01-01

Recent policy in China targets an increase in the contribution of natural gas to the nation's energy supply. Historically, China's natural gas prices have been highly regulated with a goal to protect consumers. The old pricing regime failed to provide enough incentives for natural gas suppliers, which often resulted in natural gas shortage. A new gas pricing reform was tested in Guangdong and Guangxi provinces in 2011, and introduced nationwide in 2013. The reform is aimed at creating a more market-based pricing mechanism. We show that a substantial progress toward a better predictability and transparency of prices has been made. The prices are now more connected with the international fuel oil and liquid petroleum gas prices. The government's approach for a temporary two-tier pricing when some volumes are still traded at old prices reduced a potential opposition during the new regime implementation. Some limitations of the natural gas pricing remain as it created biased incentives for producers and favors large natural gas suppliers. The pricing reform at its current stage falls short of establishing a complete market mechanism driven by an interaction of supply and demand of natural gas in China. - Highlights: • China's reform of natural gas pricing is in effect nationwide from 2013. • Prices are now connected to international fuel oil and liquid petroleum gas prices. • The reform benefits domestic producers and importers of natural gas. • There are still price distortions between industrial and residential sector. • The reform needs to create a system where both supply and demand are considered.

Biodegradation of polycyclic aromatic hydrocarbons: Using microbial bioelectrochemical systems to overcome an impasse.

Science.gov (United States)

Kronenberg, Maria; Trably, Eric; Bernet, Nicolas; Patureau, Dominique

2017-12-01

Polycyclic aromatic hydrocarbons (PAHs) are hardly biodegradable carcinogenic organic compounds. Bioremediation is a commonly used method for treating PAH contaminated environments such as soils, sediment, water bodies and wastewater. However, bioremediation has various drawbacks including the low abundance, diversity and activity of indigenous hydrocarbon degrading bacteria, their slow growth rates and especially a limited bioavailability of PAHs in the aqueous phase. Addition of nutrients, electron acceptors or co-substrates to enhance indigenous microbial activity is costly and added chemicals often diffuse away from the target compound, thus pointing out an impasse for the bioremediation of PAHs. A promising solution is the adoption of bioelectrochemical systems. They guarantee a permanent electron supply and withdrawal for microorganisms, thereby circumventing the traditional shortcomings of bioremediation. These systems combine biological treatment with electrochemical oxidation/reduction by supplying an anode and a cathode that serve as an electron exchange facility for the biocatalyst. Here, recent achievements in polycyclic aromatic hydrocarbon removal using bioelectrochemical systems have been reviewed. This also concerns PAH precursors: total petroleum hydrocarbons and diesel. Removal performances of PAH biodegradation in bioelectrochemical systems are discussed, focussing on configurational parameters such as anode and cathode designs as well as environmental parameters like porosity, salinity, adsorption and conductivity of soil and sediment that affect PAH biodegradation in BESs. The still scarcely available information on microbiological aspects of bioelectrochemical PAH removal is summarised here. This comprehensive review offers a better understanding of the parameters that affect the removal of PAHs within bioelectrochemical systems. In addition, future experimental setups are proposed in order to study syntrophic relationships between PAH

Simulation of the high-pressure phase equilibria of hydrocarbon-water/brine systems

DEFF Research Database (Denmark)

Zuo, You-Xiang; Stenby, Erling Halfdan; Guo, Tian-Min

1996-01-01

The major objectives of this work are: (1) extend the modified Patel-Teja (MPT) equation of state proposed for aqueous electrolyte systems (Zuo and Guo, 1991) to describe the liquid-liquid and vapor-liquid-liquid equilibria of hydrocarbon-water/brine systems through introducing an unconventional...

Health systems research in the time of health system reform in India: a review.

Science.gov (United States)

Rao, Krishna D; Arora, Radhika; Ghaffar, Abdul

2014-08-09

Research on health systems is an important contributor to improving health system performance. Importantly, research on program and policy implementation can also create a culture of public accountability. In the last decade, significant health system reforms have been implemented in India. These include strengthening the public sector health system through the National Rural Health Mission (NRHM), and expansion of government-sponsored insurance schemes for the poor. This paper provides a situation analysis of health systems research during the reform period. We reviewed 9,477 publications between 2005 and 2013 in two online databases, PubMed and IndMED. Articles were classified according to the WHO classification of health systems building blocks. Our findings indicate the number of publications on health systems progressively increased every year from 92 in 2006 to 314 in 2012. The majority of papers were on service delivery (40%), with fewer on information (16%), medical technology and vaccines (15%), human resources (11%), governance (5%), and financing (8%). Around 70% of articles were lead by an author based in India, the majority by authors located in only four states. Several states, particularly in eastern and northeastern India, did not have a single paper published by a lead author located in a local institution. Moreover, many of these states were not the subject of a single published paper. Further, a few select institutions produced the bulk of research. Of the foreign author lead papers, 77% came from five countries (USA, UK, Canada, Australia, and Switzerland). The growth of published research during the reform period in India is a positive development. However, bulk of this research is produced in a few states and by a few select institutions Further strengthening health systems research requires attention to neglected health systems domains like human resources, financing, and governance. Importantly, research capacity needs to be strengthened in

Multi-fuel reformers for fuel cells used in transportation. Phase 1: Multi-fuel reformers

Science.gov (United States)

1994-05-01

DOE has established the goal, through the Fuel Cells in Transportation Program, of fostering the rapid development and commercialization of fuel cells as economic competitors for the internal combustion engine. Central to this goal is a safe feasible means of supplying hydrogen of the required purity to the vehicular fuel cell system. Two basic strategies are being considered: (1) on-board fuel processing whereby alternative fuels such as methanol, ethanol or natural gas stored on the vehicle undergo reformation and subsequent processing to produce hydrogen, and (2) on-board storage of pure hydrogen provided by stationary fuel processing plants. This report analyzes fuel processor technologies, types of fuel and fuel cell options for on-board reformation. As the Phase 1 of a multi-phased program to develop a prototype multi-fuel reformer system for a fuel cell powered vehicle, the objective of this program was to evaluate the feasibility of a multi-fuel reformer concept and to select a reforming technology for further development in the Phase 2 program, with the ultimate goal of integration with a DOE-designated fuel cell and vehicle configuration. The basic reformer processes examined in this study included catalytic steam reforming (SR), non-catalytic partial oxidation (POX) and catalytic partial oxidation (also known as Autothermal Reforming, or ATR). Fuels under consideration in this study included methanol, ethanol, and natural gas. A systematic evaluation of reforming technologies, fuels, and transportation fuel cell applications was conducted for the purpose of selecting a suitable multi-fuel processor for further development and demonstration in a transportation application.

MANTLE SOURCES OF GENERATION OF HYDROCARBONS: GEOLOGY-PHYSICAL SIGNS AND FORECAST-SEARCHING CRITERIONS OF MAPPING; REGULARITY OF AN OIL-AND-GAS-BEARING CAPACITY AS UNLOADING REFLEX OF MANTLE HYDROCARBON-SYSTEMS IN THE CRUST OF THE EARTH

OpenAIRE

Тімурзіїв, А.І.

2017-01-01

In the conditions of the developed uncertainty concerning the nature of primary sources (donors) and the generation focal (reactionary chambers) of deep hydrocarbons, questions of the nature of donors and the sources of generation of deep hydrocarbons systems, the mechanism and ways of generation and in-source mobilization of hydrocarbons in the top mantle of the Earth and evacuation (vertical migration) of hydrocarbon-systems from the generation sources in the mantle of the Earth into the ac...

Yu Kilchun’s Concept of Reform of the Tax System in the Korean Empire

Directory of Open Access Journals (Sweden)

Jinah Yang

2016-08-01

Full Text Available Yu Kilchun in “Semubu (Tax Department” criticizes the trend of the tax system, in which the authority to impose and collect taxes had been taken away from the local magistrates and the isŏ class (composed of hyangni, local functionaries, and sŏri, petty clerks during the Kabo Reform was once again returned to them. Yu Kilchun devised a concept of tax system reform on the premise of the reorganization of the administrative districts into the chu-kun-hyang-ri (state-county-district-village system. Yu’s idea was to make myŏn (hyang, district a governing administrative unit, placed under direct government control. To fund the operation of local governments, Yu proposed to create local taxes, chu taxes and hyang. Tax amounts were to be determined by local assemblies, chuhoe and hyanghoe, which were given the authority to deliberate on budget. The authority to review tax sources, levy and collect taxes was given to hyang, a small unit of administrative division. By imbuing this authority to hyang, Yu Kilchun planned to exclude local magistrates and the isŏ class in the tax collection process. Since “Semubu” discusses the reorganization of administrative divisions and local tax administration, as well as local tax system reform, the discovery of this text is significant, as it expands the range of the reform ideas proposed by Yu Kilchun, and furthermore the Enlightenment Party.

Impact of structural reforms on planning systems and policies

DEFF Research Database (Denmark)

Galland, Daniel; Enemark, Stig

2013-01-01

spatial development processes. The reasoning behind this argument stems from the case of Denmark, where a structural reform that changed the country’s geographies of inter-governmental arrangements significantly transformed the configuration and functioning of the national spatial planning system. Once...... concerning how the scope of Danish spatial planning has been reoriented over time in light of three interrelated strands of understanding....

Mental health service delivery following health system reform in Colombia.

Science.gov (United States)

Romero-González, Mauricio; González, Gerardo; Rosenheck, Robert A

2003-12-01

In 1993, Colombia underwent an ambitious and comprehensive process of health system reform based on managed competition and structured pluralism, but did not include coverage for mental health services. In this study, we sought to evaluate the impact of the reform on access to mental health services and whether there were changes in the pattern of mental health service delivery during the period after the reform. Changes in national economic indicators and in measures of mental health and non-mental health service delivery for the years 1987 and 1997 were compared. Data were obtained from the National Administrative Department of Statistics of Colombia (DANE), the Department of National Planning and Ministry of the Treasury of Colombia, and from national official reports of mental health and non-mental health service delivery from the Ministry of Health of Colombia for the same years. While population-adjusted access to mental health outpatient services declined by -2.7% (-11.2% among women and +5.8% among men), access to general medical outpatient services increased dramatically by 46%. In-patient admissions showed smaller differences, with a 7% increase in mental health admissions, as compared to 22.5% increase in general medical admissions. The health reform in Colombia imposed competition across all health institutions with the intention of encouraging efficiency and financial autonomy. However, the challenge of institutional survival appears to have fallen heavily on mental health care institutions that were also expected to participate in managed competition, but that were at a serious disadvantage because their services were excluded from the compulsory standardized package of health benefits. While the Colombian health care reform intended to close the gap between those who had and those who did not have access to health services, it appears to have failed to address access to specialized mental health services, although it does seem to have promoted a

Development of Sulfur and Carbon Tolerant Reforming Alloy Catalysts Aided Fundamental Atomistic Insights

Energy Technology Data Exchange (ETDEWEB)

Suljo Linic

2008-12-31

Current hydrocarbon reforming catalysts suffer from rapid carbon and sulfur poisoning. Even though there is a tremendous incentive to develop more efficient catalysts, these materials are currently formulated using inefficient trial and error experimental approaches. We have utilized a hybrid experimental/theoretical approach, combining quantum Density Functional Theory (DFT) calculations and various state-of-the-art experimental tools, to formulate carbon tolerant reforming catalysts. We have employed DFT calculations to develop molecular insights into the elementary chemical transformations that lead to carbon poisoning of Ni catalysts. Based on the obtained molecular insights, we have identified, using DFT quantum calculation, various Ni alloy catalysts as potential carbon tolerant reforming catalysts. The alloy catalysts were synthesized and tested in steam reforming and partial oxidation of methane, propane, and isooctane. We demonstrated that the alloy catalysts are much more carbon-tolerant than monometallic Ni catalysts under nearly stoichiometric steam-to-carbon ratios. Under these conditions, monometallic Ni is rapidly poisoned by sp2 carbon deposits. The research approach is distinguished by two characteristics: (a) knowledge-based, bottomup approach, compared to the traditional trial and error approach, allows for a more efficient and systematic discovery of improved catalysts. (b) the focus is on exploring alloy materials which have been largely unexplored as potential reforming catalysts.

Method of Generating Hydrocarbon Reagents from Diesel, Natural Gas and Other Logistical Fuels

Science.gov (United States)

Herling, Darrell R [Richland, WA; Aardahl, Chris L [Richland, WA; Rozmiarek, Robert T [Middleton, WI; Rappe, Kenneth G [Richland, WA; Wang, Yong [Richland, WA; Holladay, Jamelyn D [Kennewick, WA

2008-10-14

The present invention provides a process for producing reagents for a chemical reaction by introducing a fuel containing hydrocarbons into a flash distillation process wherein the fuel is separated into a first component having a lower average molecular weight and a second component having a higher average molecular weight. The first component is then reformed to produce synthesis gas wherein the synthesis gas is reacted catalytically to produce the desire reagent.

Inclusive Financial System Reforms in Uganda: Unveiling Ambiguity

OpenAIRE

Ayoki, Milton

2014-01-01

This paper examines the financial system reforms in the context of financial sector deepening, and strategy for financial sector development and inclusion in Uganda. Results suggest that the indicators of financial sector development are largely as they were in 1996 and that the actual gains from financial inclusion strategies are small. Evidence suggests a weak link between financial deepening and financial usage by firms and households. It finds the acclaimed success (by policy makers and s...

Simulation of a 250 kW diesel fuel processor/PEM fuel cell system

Science.gov (United States)

Amphlett, J. C.; Mann, R. F.; Peppley, B. A.; Roberge, P. R.; Rodrigues, A.; Salvador, J. P.

Polymer-electrolyte membrane (PEM) fuel cell systems offer a potential power source for utility and mobile applications. Practical fuel cell systems use fuel processors for the production of hydrogen-rich gas. Liquid fuels, such as diesel or other related fuels, are attractive options as feeds to a fuel processor. The generation of hydrogen gas for fuel cells, in most cases, becomes the crucial design issue with respect to weight and volume in these applications. Furthermore, these systems will require a gas clean-up system to insure that the fuel quality meets the demands of the cell anode. The endothermic nature of the reformer will have a significant affect on the overall system efficiency. The gas clean-up system may also significantly effect the overall heat balance. To optimize the performance of this integrated system, therefore, waste heat must be used effectively. Previously, we have concentrated on catalytic methanol-steam reforming. A model of a methanol steam reformer has been previously developed and has been used as the basis for a new, higher temperature model for liquid hydrocarbon fuels. Similarly, our fuel cell evaluation program previously led to the development of a steady-state electrochemical fuel cell model (SSEM). The hydrocarbon fuel processor model and the SSEM have now been incorporated in the development of a process simulation of a 250 kW diesel-fueled reformer/fuel cell system using a process simulator. The performance of this system has been investigated for a variety of operating conditions and a preliminary assessment of thermal integration issues has been carried out. This study demonstrates the application of a process simulation model as a design analysis tool for the development of a 250 kW fuel cell system.

Review of Judicial Reforms in Bhutan

OpenAIRE

Dubgyur, Lungten

2004-01-01

This essay highlights the anomalies of judicial reforms in Bhutan. It presents a historical perspective of Bhutanese judicial reforms and addresses recent developments. It discusses court performance and experiences and approaches adopted in making the courts efficient. Much of the reform initiatives emanate from the throne. His Majesty the King has always advocated an efficient judicial system for the Kingdom. In obedience to the Royal Commands, the judicial system and judicial process in Bh...

Bio-oil steam reforming, partial oxidation or oxidative steam reforming coupled with bio-oil dry reforming to eliminate CO{sub 2} emission

Energy Technology Data Exchange (ETDEWEB)

Hu, Xun [State Key Laboratory for Oxo Synthesis and Selective Oxidation, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Graduate School of Chinese Academy of Sciences, Beijing 100039 (China); Lu, Gongxuan [State Key Laboratory for Oxo Synthesis and Selective Oxidation, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China)

2010-07-15

Biomass is carbon-neutral and utilization of biomass as hydrogen resource shows no impact on atmospheric CO{sub 2} level. Nevertheless, a significant amount of CO{sub 2} is always produced in biomass gasification processes. If the CO{sub 2} produced can further react with biomass, then the biomass gasification coupled with CO{sub 2} reforming of biomass will result in a net decrease of CO{sub 2} level in atmosphere and produce the chemical raw material, syngas. To achieve this concept, a ''Y'' type reactor is developed and applied in bio-oil steam reforming, partial oxidation, or oxidative steam reforming coupled with CO{sub 2} reforming of bio-oil to eliminate the emission of CO{sub 2}. The experimental results show that the reaction systems can efficiently suppress the emission of CO{sub 2} from various reforming processes. The different coupled reaction systems generate the syngas with different molar ratio of CO/H{sub 2}. In addition, coke deposition is encountered in the different reforming processes. Both catalysts and experimental parameters significantly affect the coke deposition. Ni/La{sub 2}O{sub 3} catalyst shows much higher resistivity toward coke deposition than Ni/Al{sub 2}O{sub 3} catalyst, while employing high reaction temperature is vital for elimination of coke deposition. Although the different coupled reaction systems show different characteristic in terms of product distribution and coke deposition, which all can serve as methods for storage of the carbon from fossil fuels or air. (author)

An Analysis of Missile Systems Cost Growth and Implementation of Acquisition Reform Initiatives Using a Hybrid Adjusted Cost Growth Model

National Research Council Canada - National Science Library

Abate, Christopher

2004-01-01

...) data with a hybrid adjusted cost growth (ACG) model. In addition, an analysis of acquisition reform initiatives during the treatment period was conducted to determine if reform efforts impacted missile system cost growth. A pre-reform...

Downhole fluid injection systems, CO2 sequestration methods, and hydrocarbon material recovery methods

Science.gov (United States)

Schaef, Herbert T.; McGrail, B. Peter

2015-07-28

Downhole fluid injection systems are provided that can include a first well extending into a geological formation, and a fluid injector assembly located within the well. The fluid injector assembly can be configured to inject a liquid CO2/H2O-emulsion into the surrounding geological formation. CO2 sequestration methods are provided that can include exposing a geological formation to a liquid CO2/H2O-emulsion to sequester at least a portion of the CO2 from the emulsion within the formation. Hydrocarbon material recovery methods are provided that can include exposing a liquid CO2/H2O-emulsion to a geological formation having the hydrocarbon material therein. The methods can include recovering at least a portion of the hydrocarbon material from the formation.

Is the Colombian health system reform improving the performance of public hospitals in Bogotá?

Science.gov (United States)

McPake, Barbara; Yepes, Francisco Jose; Lake, Sally; Sanchez, Luz Helena

2003-06-01

Many countries are experimenting with public hospital reform - both increasing the managerial autonomy with which hospitals conduct their affairs, and separating 'purchaser' and 'provider' sides of the health system, thus increasing the degree of market pressure brought to bear on hospitals. Evidence suggesting that such reform will improve hospital performance is weak. From a theoretical perspective, it is not clear why public hospitals should be expected to behave like firms and seek to maximize profits as this model requires. Empirically, there is very slight evidence that such reforms may improve efficiency, and reason to be concerned about their equity implications. In Colombia, an ambitious reform programme includes among its measures the attempt to universalize a segmented health system, the creation of a purchaser-provider split and the transformation of public hospitals into 'autonomous state entities'. By design, the Colombian reform programme avoids the forces that produce equity losses in other developing countries. This paper reports the results of a study that has tried to track hospital performance in other dimensions in the post-reform period in Bogotá. Trends in hospital inputs, production and productivity, quality and patient satisfaction are presented, and qualitative data based on interviews with hospital workers are analyzed. The evidence we have been able to collect is capable of providing only a partial response to the study question. There is some evidence of increased activity and productivity and sustained quality despite declining staffing levels. Qualitative data suggest that hospital workers have noticed considerable changes, which include greater responsiveness to patients but also a heavier administrative burden. It is difficult to attribute specific causality to all of the changes measured and this reflects the inherent difficulty of judging the effects of large-scale reform programmes as well as weaknesses and gaps in the data

[Health system reforms, economic constraints and ethical and legal values].

Science.gov (United States)

Caillol, Michel; Le Coz, Pierre; Aubry, Régis; Bréchat, Pierre-Henri

2010-01-01

Health system and hospital reforms have led to important and on-going legislative, structural and organizational changes. Is there any logic at work within the health system and hospitals that could call into question the principle of solidarity, the secular values of ethics that govern the texts of law and ethics? In order to respond, we compared our experiences to a review of the professional and scientific literature from 1992 to 2010. Over the course of the past eighteen years, health system organization was subjected to variations and significant tensions. These variations are witnesses to a paradigm shift: although a step towards the regionalization of the health system integrating the choice of public health priorities, consultation and participatory democracy has been implemented, nevertheless the system was then re-oriented towards the trend of returning to centralization on the basis of uniting economics, technical modernization and contracting. This change of doctrine may undermine the social mission of hospitals and the principle of solidarity. Progress, the aging population and financial constraints would force policy-makers to steer the health system towards more centralized control. Hospitals, health professionals and users may feel torn within a system that tends to simplify and minimize what is becoming increasingly complex and global. Benchmarks on values, ethics and law for the hospitals, healthcare professionals and users are questioned. These are important elements to consider when the law on the reform of hospitals, patients, health care and territories and regional health agencies is implemented.

Columbia River Hatchery Reform System-Wide Report.

Energy Technology Data Exchange (ETDEWEB)

Warren, Dan [Hatchery Scientific Review Group

2009-04-16

The US Congress funded the Puget Sound and Coastal Washington Hatchery Reform Project via annual appropriations to the US Fish and Wildlife Service (USFWS) beginning in fiscal year 2000. Congress established the project because it recognized that while hatcheries have a necessary role to play in meeting harvest and conservation goals for Pacific Northwest salmonids, the hatchery system was in need of comprehensive reform. Most hatcheries were producing fish for harvest primarily to mitigate for past habitat loss (rather than for conservation of at-risk populations) and were not taking into account the effects of their programs on naturally spawning populations. With numerous species listed as threatened or endangered under the Endangered Species Act (ESA), conservation of salmon in the Puget Sound area was a high priority. Genetic resources in the region were at risk and many hatchery programs as currently operated were contributing to those risks. Central to the project was the creation of a nine-member independent scientific review panel called the Hatchery Scientific Review Group (HSRG). The HSRG was charged by Congress with reviewing all state, tribal and federal hatchery programs in Puget Sound and Coastal Washington as part of a comprehensive hatchery reform effort to: conserve indigenous salmonid genetic resources; assist with the recovery of naturally spawning salmonid populations; provide sustainable fisheries; and improve the quality and cost-effectiveness of hatchery programs. The HSRG worked closely with the state, tribal and federal managers of the hatchery system, with facilitation provided by the non-profit organization Long Live the Kings and the law firm Gordon, Thomas, Honeywell, to successfully complete reviews of over 200 hatchery programs at more than 100 hatcheries across western Washington. That phase of the project culminated in 2004 with the publication of reports containing the HSRG's principles for hatchery reform and recommendations

Low CO2-emissions hybrid solar combined-cycle power system with methane membrane reforming

International Nuclear Information System (INIS)

Li, Yuanyuan; Zhang, Na; Cai, Ruixian

2013-01-01

Based on the principle of cascade utilization of multiple energy resources, a gas-steam combined cycle power system integrated with solar thermo-chemical fuel conversion and CO 2 capture has been proposed and analyzed. The collected solar heat at 550 °C drives the endothermic methane reforming and is converted to the produced syngas chemical exergy, and then released as high-temperature thermal energy via combustion for power generation, achieving its high-efficiency heat-power conversion. The reforming reaction is integrated with a hydrogen separation membrane, which continuously withdraws hydrogen from the reaction zone and enables nearly full methane conversion. The CO 2 enriched gas being concentrated in the retentate zone is collected and processed with pre-combustion decarbonization. The system is thermodynamically simulated using the ASPEN PLUS code. The results show that with 91% CO 2 captured, the specific CO 2 emission is 25 g/kWh. An exergy efficiency of 58% and thermal efficiency of 51.6% can be obtained. A fossil fuel saving ratio of 31.2% is achievable with a solar thermal share of 28.2%, and the net solar-to-electricity efficiency based on the gross solar heat incident on the collector is about 36.4% compared with the same gas-steam combined cycle system with an equal CO 2 removal ratio obtained by post-combustion decarbonization. - Highlights: ► A solar-assisted hybrid combined cycle power system has been proposed and analyzed. ► The system integrates power generation with solar-driven reforming and CO 2 capture. ► solar heat upgrading and high-efficiency heat-to-power conversion are achieved. ► membrane reforming enables high CH 4 conversion and pre-combustion CO 2 capture. ► The system thermodynamic performances have been investigated and compared

Thermodynamic analysis of application of organic Rankine cycle for heat recovery from an integrated DIR-MCFC with pre-reformer

International Nuclear Information System (INIS)

Vatani, Ali; Khazaeli, Ali; Roshandel, Ramin; Panjeshahi, Mohammad Hassan

2013-01-01

Highlights: ► Using an integrated pre-reformer before feeding a DIR-MCFC is proposed. ► An ORC with different working fluid is used for waste heat recovery from the proposed plant. ► Performance of compound system is evaluated by thermodynamic analysis. ► An improvement on simultaneously heat integration between the units and waste heat recovery is performed. ► Overall energy and exergy efficiencies are found to be 60.45% and 57.75%. - Abstract: This work deals with waste heat recovery from a proposed direct internal reforming molten carbonate fuel cell (DIR-MCFC), including an integrated pre-reformer. In this regard, some advantages are attainable over exhaust gas recycling. For instance, due to low temperature in the pre-reformer, carbon deposition and coke formation resulting from higher hydrocarbons can be eliminated. In this study, the cathode outlet provides the heat requirement for the pre-reforming process. After partial heat recovery from the cathode outlet, the stream still has a considerable energy and exergy (352.55 °C and 83.687 kW respectively). This study investigates waste heat recovery from the proposed DIR-MCFC, using an organic Rankine cycle (ORC) with two different configurations. In the first case, the cathode outlet provides the heat requirement for the pre-reforming process; then, it enters the heat recovery vapor generator of the organic Rankine cycle. In the second case, the cathode outlet is split into two streams for using in an ORC and supplying the pre-reforming process required heat. Several substances are selected as working fluids in order to compare their performance in the waste heat recovery system. The overall results at optimum conditions indicate that the energy and exergy efficiencies of the compound system are increased and its exergy loss is decreased with cathode splitting for all substances (1.1% average over all fluids). It is concluded that cathode splitting has a significant impact on the substances which

Control and experimental characterization of a methanol reformer for a 350 W high temperature polymer electrolyte membrane fuel cell system

DEFF Research Database (Denmark)

Andreasen, Søren Juhl; Kær, Søren Knudsen; Sahlin, Simon Lennart

2013-01-01

is the water and methanol mixture fuel flow and the burner fuel/air ratio and combined flow. An experimental setup is presented capable of testing the methanol reformer used in the Serenergy H3 350 Mobile Battery Charger; a high temperature polymer electrolyte membrane (HTPEM) fuel cell system......This work presents a control strategy for controlling the methanol reformer temperature of a 350 W high temperature polymer electrolyte membrane fuel cell system, by using a cascade control structure for reliable system operation. The primary states affecting the methanol catalyst bed temperature....... The experimental system consists of a fuel evaporator utilizing the high temperature waste gas from the cathode air cooled 45 cell HTPEM fuel cell stack. The fuel cells used are BASF P1000 MEAs which use phosphoric acid doped polybenzimidazole membranes. The resulting reformate gas output of the reformer system...

Modeling efficiency and water balance in PEM fuel cell systems with liquid fuel processing and hydrogen membranes

Science.gov (United States)

Pearlman, Joshua B.; Bhargav, Atul; Shields, Eric B.; Jackson, Gregory S.; Hearn, Patrick L.

Integrating PEM fuel cells effectively with liquid hydrocarbon reforming requires careful system analysis to assess trade-offs associated with H 2 production, purification, and overall water balance. To this end, a model of a PEM fuel cell system integrated with an autothermal reformer for liquid hydrocarbon fuels (modeled as C 12H 23) and with H 2 purification in a water-gas-shift/membrane reactor is developed to do iterative calculations for mass, species, and energy balances at a component and system level. The model evaluates system efficiency with parasitic loads (from compressors, pumps, and cooling fans), system water balance, and component operating temperatures/pressures. Model results for a 5-kW fuel cell generator show that with state-of-the-art PEM fuel cell polarization curves, thermal efficiencies >30% can be achieved when power densities are low enough for operating voltages >0.72 V per cell. Efficiency can be increased by operating the reformer at steam-to-carbon ratios as high as constraints related to stable reactor temperatures allow. Decreasing ambient temperature improves system water balance and increases efficiency through parasitic load reduction. The baseline configuration studied herein sustained water balance for ambient temperatures ≤35 °C at full power and ≤44 °C at half power with efficiencies approaching ∼27 and ∼30%, respectively.

Reforming the court management system of Romania in the European Union integration process

Directory of Open Access Journals (Sweden)

Nicolae Elvis Cioabă

2014-11-01

Full Text Available The Superior Council of Magistracy represent a cornerstone of the Romanian court management system. This responsibility is partly shared with the Ministry of Justice. The reform of the court management system in Romania has been and still is disputable, the main actors being on one hand the magistrates and on the other the Ministry of Justice. While observing this „dispute“ we may discover a third actor, namely the European Union, who has entered scene in the context of Romania’s European integration. This research is looking to plausibly explain which was the part played by the EU and how did it influence the above mentioned reform, with special emphasis on the Superior Council of Magistracy.

Development of Sulfur and Carbon Tolerant Reforming Alloy Catalysts Aided by Fundamental Atomistics Insights

Energy Technology Data Exchange (ETDEWEB)

Suljo Linic

2006-08-31

Current hydrocarbon reforming catalysts suffer from rapid carbon and sulfur poisoning. Even though there is a tremendous incentive to develop more efficient catalysts, these materials are currently formulated using inefficient trial and error experimental approaches. We have utilized a novel hybrid experimental/theoretical approach, combining quantum Density Functional Theory (DFT) calculations and various state-of-the-art experimental tools, to formulate carbon tolerant reforming catalysts. We have employed DFT calculations to develop molecular insights into the elementary chemical transformations that lead to carbon poisoning of Ni catalysts. Based on the obtained molecular insights, we have identified, using DFT quantum calculation, Sn/Ni alloy as a potential carbon tolerant reforming catalyst. Sn/Ni alloy was synthesized and tested in steam reforming of methane, propane, and isooctane. We demonstrated that the alloy catalyst is carbon-tolerant under nearly stoichiometric steam-to-carbon ratios. Under these conditions, monometallic Ni is rapidly poisoned by sp2 carbon deposits. The research approach is distinguished by a few characteristics: (a) Knowledge-based, bottom-up approach, compared to the traditional trial and error approach, allows for a more efficient and systematic discovery of improved catalysts. (b) The focus is on exploring alloy materials which have been largely unexplored as potential reforming catalysts.

Reform of Kosovo Tax System after independence and its key functions

OpenAIRE

Dr.Sc. Bedri Peci

2013-01-01

In this paper we have analyzed the initial circumstances which characterize tax system in Kosovo after independence. After the Declaration of Independence, it is of the paramount importance that Kosovo has undergone through a reform of policy and tax system by exploring more seriously the economic functions. However, policy and tax system of Kosovo should be more in function of economic development by achieving equilibrium between direct and indirect taxes, increasing efficiency of public ...

Thermodynamic simulation of biomass gas steam reforming for a solid oxide fuel cell (SOFC system

Directory of Open Access Journals (Sweden)

A. Sordi

2009-12-01

Full Text Available This paper presents a methodology to simulate a small-scale fuel cell system for power generation using biomass gas as fuel. The methodology encompasses the thermodynamic and electrochemical aspects of a solid oxide fuel cell (SOFC, as well as solves the problem of chemical equilibrium in complex systems. In this case the complex system is the internal reforming of biomass gas to produce hydrogen. The fuel cell input variables are: operational voltage, cell power output, composition of the biomass gas reforming, thermodynamic efficiency, electrochemical efficiency, practical efficiency, the First and Second law efficiencies for the whole system. The chemical compositions, molar flows and temperatures are presented to each point of the system as well as the exergetic efficiency. For a molar water/carbon ratio of 2, the thermodynamic simulation of the biomass gas reforming indicates the maximum hydrogen production at a temperature of 1070 K, which can vary as a function of the biomass gas composition. The comparison with the efficiency of simple gas turbine cycle and regenerative gas turbine cycle shows the superiority of SOFC for the considered electrical power range.

Application of flexible micro temperature sensor in oxidative steam reforming by a methanol micro reformer.

Science.gov (United States)

Lee, Chi-Yuan; Lee, Shuo-Jen; Shen, Chia-Chieh; Yeh, Chuin-Tih; Chang, Chi-Chung; Lo, Yi-Man

2011-01-01

Advances in fuel cell applications reflect the ability of reformers to produce hydrogen. This work presents a flexible micro temperature sensor that is fabricated based on micro-electro-mechanical systems (MEMS) technology and integrated into a flat micro methanol reformer to observe the conditions inside that reformer. The micro temperature sensor has higher accuracy and sensitivity than a conventionally adopted thermocouple. Despite various micro temperature sensor applications, integrated micro reformers are still relatively new. This work proposes a novel method for integrating micro methanol reformers and micro temperature sensors, subsequently increasing the methanol conversion rate and the hydrogen production rate by varying the fuel supply rate and the water/methanol ratio. Importantly, the proposed micro temperature sensor adequately controls the interior temperature during oxidative steam reforming of methanol (OSRM), with the relevant parameters optimized as well.

Application of Flexible Micro Temperature Sensor in Oxidative Steam Reforming by a Methanol Micro Reformer

Directory of Open Access Journals (Sweden)

Yi-Man Lo

2011-02-01

Full Text Available Advances in fuel cell applications reflect the ability of reformers to produce hydrogen. This work presents a flexible micro temperature sensor that is fabricated based on micro-electro-mechanical systems (MEMS technology and integrated into a flat micro methanol reformer to observe the conditions inside that reformer. The micro temperature sensor has higher accuracy and sensitivity than a conventionally adopted thermocouple. Despite various micro temperature sensor applications, integrated micro reformers are still relatively new. This work proposes a novel method for integrating micro methanol reformers and micro temperature sensors, subsequently increasing the methanol conversion rate and the hydrogen production rate by varying the fuel supply rate and the water/methanol ratio. Importantly, the proposed micro temperature sensor adequately controls the interior temperature during oxidative steam reforming of methanol (OSRM, with the relevant parameters optimized as well.

Development prospects of health and reform of the fiscal system in bosnia and herzegovina.

Science.gov (United States)

Salihbasic, Sehzada

2011-01-01

The functions of the health system, according to the key objectives and relationships within the sub-systems that are available to the policy makers and managers in the Health Care system in Bosnia and Herzegovina - B&H, have been elaborated in detail, with the analytical overview of relevant indicators, thus confirming the limitations of the health promotion in B&H. The ability to overcome the expressed problems is in the startup of process for structural adjustment of the health sector, reform of the health care system and its financing. The reform in health system implies fundamental changes that need to take place, in B&H, as a state in health policy and institutions in the health care system, in order to improve the functioning of health systems with the aim of ensuring better health of the population. Reform implies the existence of documents with clearly formulated health policy objectives, for which the state stands, and for which a consensus was reached on the national level with all key actors in the political structure: public promotion of the basic principles for carrying out the reform, its implementation within a reasonable time frame, the corresponding effects for providers and customer satisfaction, as well as improving health services' efficacy (i.e. micro and macro) and the quality of healthcare. In this article, we elaborated the criteria for the classification of health systems, whereby the scientifically-based and empirical analysis is conducted on the health system in B&H and elaborated the key levers of the system. Leveraged organizational arrangements relating to the economic and political environment, organization and management functions, in connection with the services of finance, funds, customers and service providers, from which it follows the framework of state legislation related to health policy and health institutions at the state level are responsible for finance, planning, the organization, payment, regulation and conduct. If we

Two decades of tax-sharing system reform in China: a comparative study

Institute of Scientific and Technical Information of China (English)

Bai Yanfeng; Wang Kai

2015-01-01

Two decades have passed since the Tax-sharing System Reform began in China.We discuss deep-seated problems in the financial management system.We contend that from the point of fiscal relations among different levels of government,the marked decline of the central government's fiscal revenue as a share of the national total indicates that the macroeconomic regulation and control function of the central government has weakened;from the point of the form of fiscal revenue,the constant downward trend of the proportion of the tax revenue indicates that the old problem of excessive types of fiscal revenue forms have reappeared;from the perspective of tax structure,although the proportion of direct taxes has grown,turnover tax continues to account for the majority of tax revenue and the unbalanced dual-subject tax system has changed little,which indicates China's tax structure has brought about stagnation.We believe that China's tax reform should be incorporated into the medium-term fiscal planning in order to solve deep-seated problems in operation of the financial management system.

Health care reforms.

Science.gov (United States)

Marušič, Dorjan; Prevolnik Rupel, Valentina

2016-09-01

In large systems, such as health care, reforms are underway constantly. The article presents a definition of health care reform and factors that influence its success. The factors being discussed range from knowledgeable personnel, the role of involvement of international experts and all stakeholders in the country, the importance of electoral mandate and governmental support, leadership and clear and transparent communication. The goals set need to be clear, and it is helpful to have good data and analytical support in the process. Despite all debates and experiences, it is impossible to clearly define the best approach to tackle health care reform due to a different configuration of governance structure, political will and state of the economy in a country.

Significance of Microbiology in Porous Hydrocarbon Related Systems

KAUST Repository

Augsburger, Nicolas

2017-07-01

This thesis explores bio-mediated processes in geotechnical and petroleum engineering. Worldwide energy consumption is rapidly increasing as the world population and per-capita consumption rises. The US Energy Information Agency (EIA) predicts that hydrocarbons will remain the primary energy source to satisfy the surging energy demands in the near future. The three topics described in detail in this document aim to link microbiology with geotechnical engineering and the petroleum industry. Microorganisms have the potential to exploit residual hydrocarbons in depleted reservoirs in a technique known as microbial enhanced oil recovery, MEOR. The potential of biosurfactants was analyzed in detail with a literature review. Biosurfactant production is the most accepted MEOR technique, and has been successfully implemented in over 700 field cases. Temperature is the main limiting factor for these techniques. The dissolution of carbonates by microorganisms was investigated experimentally. We designed a simple, economical, and robust procedure to monitor diffusion through porous media. This technique determined the diffusion coefficient of H+ in 1.5% agar, 1.122 x 10-5 cm2 sec-1, by using bromothymol blue as a pH indicator and image processing. This robust technique allows for manipulation of the composition of the agar to identify the effect of specific compounds on diffusion. The Red Sea consists of multiple seeps; the nearby sediments are telltales of deeper hydrocarbon systems. Microbial communities associated with the sediments function as in-situ sensors that provide information about the presence of carbon sources, metabolites, and the remediation potential. Sediments seeps in the Red Sea revealed different levels of bioactivity. The more active seeps, from the southern site in the Red Sea, indicated larger pore sizes, higher levels of carbon, and bioactivity with both bacteria and archaeal species present.

[Study on the reform and improvement of the medical device registration system in China].

Science.gov (United States)

Wang, Lanming

2012-11-01

Based on the theories of the Government Regulation and Administrative Licensure, aiming at the current situations of medical device registration system in China, some policy suggestions for future reform and improvement were provided as follows. (1) change the concepts of medical device registration administration. (2) perfect the regulations of medical device registration administration. (3) reform the medical device review organizational system. (4) Optimize the procedure of review and approval. (5) set up and maintain a professional team of review and approval staff. (6) reinforce the post-marketing supervision of medical devices. (7) foster and bring into play of the role of non-government organizations.

International Experience in Reforming the System of Higher Education Governance in terms of Increasing the University Autonomy

Directory of Open Access Journals (Sweden)

Chmutova Iryna M.

2017-12-01

Full Text Available The aim of the article is to summarize the international experience of reforming the system of higher education governance and develop directions that will contribute to increasing the effectiveness of the Ukrainian model for governance of higher education and ensuring its autonomy. There identified common elements and trends in European higher education reforms: greater autonomy for higher education institutions with less direct administrative intervention; greater emphasis on private rather than public funding; emphasis on the quality and effectiveness of education. The tools for implementing reforms in the European higher education system are identified: the New Public Management (NPM model, governance through networks, and new forms of governance. The changes in the university autonomy of European countries for the period of 2010-2016 are summarized. The content of the reforms in terms of increasing the autonomy of HEIs in the countries of Asia is disclosed. Possible vectors for reforming the system of higher education governance in Ukraine are identified: introduction of a model for funding HEIs on the basis of combining a one-time full budgeting and financing by results; assigning universities ownership of their buildings and their sale in the market; strengthening the decentralization of government control of higher education; development of legislative bases for the self-sufficiency of HEIs; inclusion of external stakeholders in decision-making governing bodies of HEIs; maximum involvement of students in decision-making.

Analysing a Chinese Regional Integrated Healthcare Organisation Reform Failure using a Complex Adaptive System Approach

Directory of Open Access Journals (Sweden)

Wenxi Tang

2017-06-01

Full Text Available Introduction: China’s organised health system has remained outdated for decades. Current health systems in many less market-oriented countries still adhere to traditional administrative-based directives and linear planning. Furthermore, they neglect the responsiveness and feedback of institutions and professionals, which often results in reform failure in integrated care. Complex adaptive system theory (CAS provides a new perspective and methodology for analysing the health system and policy implementation.  Methods: We observed the typical case of Qianjiang’s Integrated Health Organization Reform (IHO for 2 years to analyse integrated care reforms using CAS theory. Via questionnaires and interviews, we observed 32 medical institutions and 344 professionals. We compared their cooperative behaviours from both organisational and inter-professional levels between 2013 and 2015, and further investigated potential reasons for why medical institutions and professionals did not form an effective IHO. We discovered how interested parties in the policy implementation process influenced reform outcome, and by theoretical induction, proposed a new semi-organised system and corresponding policy analysis flowchart that potentially suits the actual realisation of CAS.  Results: The reform did not achieve its desired effect. The Qianjiang IHO was loosely integrated rather than closely integrated, and the cooperation levels between organisations and professionals were low. This disappointing result was due to low mutual trust among IHO members, with the main contributing factors being insufficient financial incentives and the lack of a common vision.  Discussion and Conclusions: The traditional 'organised health system' is old-fashioned. Rather than being completely organised or adaptive, the health system is currently more similar to a s'emi-organised system'. Medical institutions and professionals operate in a middle ground between complete adherence

Development of ATSR (Auto Thermal Steam Reformer)

International Nuclear Information System (INIS)

Ono, J.; Yoshino, Y.; Kuwabara, T.; Fujisima, S.; Kobayashi, S.; Maruko, S.

2004-01-01

'Full text:' Auto-thermal reformers are used popularly for fuel cell vehicle because they are compact and can start up quickly. On the other hand, steam reformers are used for stationary fuel cell power plant because they are good thermal efficiency. While, there are many cases using the auto- thermal reformer for stationary use with expectation of cost reduction in USA, as well. However, they are still insufficient for its durability, compactness and cost. We have been developing the new type of fuel processing system that is auto-thermal steam reformer (ATSR), which is hybrid of a conventional steam reformer (STR) and a conventional auto-thermal reformer (ATR). In this study, some proto-type of ATSR for field test were designed, tried manufacturing and tested performance and durability. And we have tried to operate with fuel cell stack to evaluate the system interface performance, that is, operability and controllability. (author)

Thermodynamic analysis of hydrocarbon refrigerants in a sub-cooling refrigeration system

Directory of Open Access Journals (Sweden)

BUKOLA O. BOLAJI

2013-06-01

Full Text Available In this study, the performance simulation of some hydrocarbon refrigerants (R290, R600 and R600a as alternatives to R134a in refrigeration system with sub-cooling is conducted by thermodynamic calculation of performance parameters using the REFPROP software. The results obtained showed that the saturated vapour pressure and temperature characteristic profiles for R600 and R600a are very close to that of R134a. The three hydrocarbon refrigerants exhibited very high refrigerating effect and condenser duty than R134a. The best of these parameters was obtained using R600. The discharge temperatures obtained using R600 and R600a were low, while that of R290 was very much higher. The highest coefficient of performance (COP and relative capacity index were obtained using R600. Average COPs of R600 and R600a are 4.6 and 2.2% higher than that of R134a, respectively. The performances of R600 and R600a in system were better than those of R134a and R290. The best performance was obtained using R600 in the system.

Proposal and assessment of a novel integrated CCHP system with biogas steam reforming using solar energy

International Nuclear Information System (INIS)

Su, Bosheng; Han, Wei; Jin, Hongguang

2017-01-01

Highlights: •A novel CCHP system with biogas steam reforming using solar energy is raised. •Chemical and physical energy of biogas is efficiently used in a cascaded way. •The energy quality of concentrating solar heat is promoted in the system. •A parametric analysis is adopted to optimize the thermodynamic performance. •A typical-day study is conducted to explore the general operation features. -- Abstract: The conventional way to utilize biogas either is energy-intensive due to biogas upgrading or causes huge waste of energy grade and environmental pollution by direct burning. This paper proposes a biogas and solar energy-assisted combined cooling, heating and power (BSCCHP) system that upgrades the caloric value of biogas before combustion by introducing a thermochemical conversion process that is driven by solar heat. Adopting commercially established technologies including steam reforming and parabolic dish concentrators, the system exhibits an enhanced system exergy efficiency, and the technology considerably reduces the direct CO 2 footprint and saves depletable fossil fuel. With a solar thermal share of 22.2%, the proposed system not only has a high net solar-to-product thermal and exergy efficiency of 46.80% and 26.49%, respectively, but also results in a commensurate 18.27% reduction of the direct CO 2 footprint compared with the reference individual systems. The effect of critical parameters in the biogas steam reforming process on the system performance was studied. A proper selection of the steam/carbon ratio leads to the optimal direct CO 2 footprint and system exergy efficiency. Pursuing a very high conversion of biogas by improving the reforming temperature is not a wise choice from a system perspective. Finally, a typical-day dynamic simulation was conducted to preliminarily explore the general operation features. This study may provide a new way to efficiently use the renewable energy in the distributed energy system.

A numerical analysis of heat and mass transfer during the steam reforming process of ethane

Science.gov (United States)

Tomiczek, Marcin; Kaczmarczyk, Robert; Mozdzierz, Marcin; Brus, Grzegorz

2017-11-01

This paper presents a numerical analysis of heat and mass transfer during the steam reforming of ethane. From a chemical point of view, the reforming process of heavy hydrocarbons, such as ethane, is complex. One of the main issue is a set of undesired chemical reactions that causes the deposition of solid carbon and consequently blocks the catalytic property of a reactor. In the literature a carbon deposition regime is selected by thermodynamical analysis to design safe operation conditions. In the case of Computational Fluid Dynamic (CFD, hereafter) models each control volume should be investigated to determinate if carbon deposition is thermodynamically favourable. In this paper the authors combine equilibrium and kinetics analysis to simulate the steam reforming of methane-ethane rich fuel. The results of the computations were juxtaposed with experimental data for methane steam reforming, and good agreement was found. An analysis based on the kinetics of reactions was conducted to predict the influence of temperature drop and non-equilibrium composition on solid carbon deposition. It was found that strong non-uniform temperature distribution in the reactor causes conditions favourable for carbon deposition at the inlet of the reformer. It was shown that equilibrium calculations, often used in the literature, are insufficient.

Generalised Multiplicative Indices of Polycyclic Aromatic Hydrocarbons and Benzenoid Systems

Science.gov (United States)

Kulli, V. R.; Stone, Branden; Wang, Shaohui; Wei, Bing

2017-05-01

Many types of topological indices such as degree-based topological indices, distance-based topological indices, and counting-related topological indices are explored during past recent years. Among degree-based topological indices, Zagreb indices are the oldest one and studied well. In the paper, we define a generalised multiplicative version of these indices and compute exact formulas for Polycyclic Aromatic Hydrocarbons and jagged-rectangle Benzenoid systems.

Qualitative analysis of governance trends after health system reforms in Latin America: lessons from Mexico.

Science.gov (United States)

Arredondo, A; Orozco, E; Recaman, A L

2018-03-01

Health policies in Latin America are centered on the democratization of health. Since 2003, during the last generation of reforms, health systems in this region have promoted governance strategies for better agreements between governments, institutions, and civil society. In this context, we develop an evaluative research to identify trends and evidence of governance after health care reforms in six regions of Mexico. Evaluative research was developed with a retrospective design based on qualitative analysis. Primary data were obtained from 189 semi-structured interviews with purposively selected health care professionals and key informants. Secondary data were extracted from a selection of 95 official documents on results of the reform project at the national level, national health policies, and lines of action for good governance. Data processing and analysis were performed using ATLAS.ti and PolicyMaker. A list of main strengths and weaknesses is presented as evidence of health system governance. Accountability at the federal level remains prescriptive; in the regions, a system of accountability and transparency in the allocation of resources and in terms of health democratization strategies is still absent. Social protection and decentralization schemes are strategies that have allowed for improvements with a proactive role of users and civil society. Regarding challenges, there are still low levels of governance and difficulties in the effective conduct of programs and reform strategies together with a lack of precision in the rules and roles of the different actors of the health system. Copyright © 2017 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Performance evaluation and comparison of fuel processors integrated with PEM fuel cell based on steam or autothermal reforming and on CO preferential oxidation or selective methanation

International Nuclear Information System (INIS)

Ercolino, Giuliana; Ashraf, Muhammad A.; Specchia, Vito; Specchia, Stefania

2015-01-01

Highlights: • Modeling of different fuel processors integrated with PEM fuel cell stack. • Steam or autothermal reforming + CO selective methanation or preferential oxidation. • Reforming of different hydrocarbons: gasoline, light diesel oil, natural gas. • 5 kW e net systems comparison via energy efficiency and primary fuel rate consumed. • Highest net efficiency: steam reformer + CO selective methanation based system. - Abstract: The performances of four different auxiliary power unit (APU) schemes, based on a 5 kW e net proton exchange membrane fuel cell (PEM-FC) stack, are evaluated and compared. The fuel processor section of each APU is characterized by a reformer (autothermal ATR or steam SR), a non-isothermal water gas shift (NI-WGS) reactor and a final syngas catalytic clean-up step: the CO preferential oxidation (PROX) reactor or the CO selective methanation (SMET) one. Furthermore, three hydrocarbon fuels, the most commonly found in service stations (gasoline, light diesel oil and natural gas) are considered as primary fuels. The comparison is carried out examining the results obtained by a series of steady-state system simulations in Aspen Plus® of the four different APU schemes by varying the fed fuel. From the calculated data, the performance of CO-PROX is not very different compared to that of the CO-SMET, but the performance of the SR based APUs is higher than the scheme of the ATR based APUs. The most promising APU scheme with respect to an overall performance target is the scheme fed with natural gas and characterized by a fuel processor chain consisting of SR, NI-WGS and CO-SMET reactors. This processing reactors scheme together with the fuel cell section, notwithstanding having practically the same energy efficiency of the scheme with SR, NI-WGS and CO-PROX reactors, ensures a less complex scheme, higher hydrogen concentration in the syngas, lower air mass rate consumption, the absence of nitrogen in the syngas and higher potential

Analysis of the role of port labour systems and reforms on the ...

African Journals Online (AJOL)

Analysis of the role of port labour systems and reforms on the competitiveness of ... Outline: - The study as a matter of order, presents as an introduction, the ... can play in the performance of a port, is presented using Ghana as a case study.

Experimental characterization and modeling of an ethanol steam reformer

DEFF Research Database (Denmark)

Mandø, Matthias; Bovo, Mirko; Nielsen, Mads Pagh

2006-01-01

This work describes the characterization of an ethanol reforming system for a high temperature PEM fuel cell system. High temperature PEM fuel cells are well suited for operation on reformate gas due to the superior CO tolerance compared with low temperature PEM. Steam reforming of liquid biofuels...

Reforming health care in Hungary.

Science.gov (United States)

Császi, L; Kullberg, P

1985-01-01

Over the past two decades Hungary has initiated a series of social and economic reforms which have emphasized decentralization of control and the reintroduction of market mechanisms into the socialized economy. These reforms both reflect and reinforce a changing social structure, in particular the growing influence of upper class special interest groups. Market reforms are an expression of concurrent ideological shifts in Hungarian society. We examined the political significance of three recent proposals to reform health services against the backdrop of broader social and economic changes taking place. The first proposes a bureaucratic reorganization, the second, patient co-payments, and the third, a voucher system. The problems each proposal identifies, as well as the constituency each represents, reveal a trend toward consolidation of class structure in Hungary. Only one of these proposals has any potential to democratize the control and management of the heath care system. Moreover, despite a governmental push toward decentralization, two of these proposals would actually increase centralized bureaucratic control. Two of the reforms incorporate market logic into their arguments, an indication that the philosophical premises of capitalism are re-emerging as an important component of the Hungarian world-view. In Hungary, as well as in other countries, social analysis of proposed health care reforms can effectively illuminate the social and political dynamics of the larger society.

Health care reforms

Directory of Open Access Journals (Sweden)

Marušič Dorjan

2016-09-01

Full Text Available In large systems, such as health care, reforms are underway constantly. The article presents a definition of health care reform and factors that influence its success. The factors being discussed range from knowledgeable personnel, the role of involvement of international experts and all stakeholders in the country, the importance of electoral mandate and governmental support, leadership and clear and transparent communication. The goals set need to be clear, and it is helpful to have good data and analytical support in the process. Despite all debates and experiences, it is impossible to clearly define the best approach to tackle health care reform due to a different configuration of governance structure, political will and state of the economy in a country.

System and process for upgrading hydrocarbons

Science.gov (United States)

Bingham, Dennis N.; Klingler, Kerry M.; Smith, Joseph D.; Turner, Terry D.; Wilding, Bruce M.

2015-08-25

In one embodiment, a system for upgrading a hydrocarbon material may include a black wax upgrade subsystem and a molten salt gasification (MSG) subsystem. The black wax upgrade subsystem and the MSG subsystem may be located within a common pressure boundary, such as within a pressure vessel. Gaseous materials produced by the MSG subsystem may be used in the process carried out within the black wax upgrade subsystem. For example, hydrogen may pass through a gaseous transfer interface to interact with black wax feed material to hydrogenate such material during a cracking process. In one embodiment, the gaseous transfer interface may include one or more openings in a tube or conduit which is carrying the black wax material. A pressure differential may control the flow of hydrogen within the tube or conduit. Related methods are also disclosed.

Designing and optimization of a micro CHP system based on Solid Oxide Fuel Cell with different fuel processing technologies

DEFF Research Database (Denmark)

Liso, Vincenzo; Nielsen, Mads Pagh; Kær, Søren Knudsen

2009-01-01

are the possibility to partially reform hydrocarbon in the fuel cell anode compartment and the possibility to use high quality heat for cogeneration. In this work, different configurations of solid oxide fuel cell system for decentralized electricity production are examined. The Balance of Plant (BoP) components...

Policy Reforms, Trojan Horses, and Imaginary Friends: The Role of External Stakeholders in Internal Quality Assurance Systems

Science.gov (United States)

Rosa, Maria João; Teixeira, Pedro

2014-01-01

The governance of higher education has been changing across Europe, most notably in response to the reform agenda that has been pervading many higher education systems. This wave of reforms has given enhanced visibility to external stakeholders, which has been often received with contrasting views. Some regarded it as a factor that would undermine…

Stability, carbon resistance, and reactivity toward autothermal reforming of nickel on ceria-based supports

International Nuclear Information System (INIS)

Sutthisripok, W.; Laosiripojana, N.

2004-01-01

'Full text:' Solid Oxide Fuel Cell (SOFC) normally requires a reformer unit, where the fuel such as natural gas, methane, methanol, or ethanol can be reformed to hydrogen before introducing to the main part of fuel cell. Nickel on commercial supports such as Al2O3, MgO, ZrO2 has been widely reported to be used as the reforming catalyst commercially. Carbon formation and catalyst deactivation are always the main problems of using this type of catalyst. It is well established that CeO2 and CeO2-ZrO2 have been applied as the catalysts in a wide variety of reactions involving oxidation or partial oxidation of hydrocarbons (e.g. automotive catalysis). In order to quantify the performance of nickel on CeO2 and CeO2-ZrO2 supports for reformer application, the stabilities toward methane steam reforming and the carbon formation resistance were studied. After 18 hours, nickel on CeO2-ZrO2 with the Ce/Zr ratio of 3/1 presented the best performance in term of stability and activity. It also provided excellent resistance toward carbon formation compared to commercial Ni/Al2O3. The autothermal reforming of methane over Ni catalyst on CeO2 and CeO2-ZrO2 supports were also investigated. Ni/Ce-ZrO2 with the Ce/ Zr ratio of 3/1 also showed the best performance. The kinetics of this reaction was also studied. In the temperature range of 750-900C, the reaction order in methane was always closed to 1. The catalyst showed a slight positive effect of hydrogen and a negative effect of steam on the steam reforming rate. The addition of oxygen increased the steam reforming rate. However, the productions of CO and H2 decreased with increasing oxygen partial pressure. (author)

Fuel upgrading and reforming with metal organic framework

KAUST Repository

Eddaoudi, Mohamed; Belmabkhout, Youssef

2016-01-01

Systems and methods for separating hydrocarbons on an internal combustion powered vehicle via one or more metal organic frameworks are disclosed. Systems and methods can further include utilizing separated hydrocarbons and exhaust to generate

Tax reform Ukraine: implementation mechanisms and consequences

Directory of Open Access Journals (Sweden)

J.Lebedzevіch

2015-06-01

Full Text Available In the article the main shortcomings of the existing domestic tax systems, which were the main reasons for the need for its reform in the context of integration into the European Community. Determined the first stage of reforming tax systems Ukraine, which is associated with the adoption of the Law of Ukraine «On Amendments to the Tax Code of Ukraine and laws of Ukraine». The main provisions of this legal act, revealing the essence of the mechanism for implementing tax reform. Analyzed the mechanism of implementation of tax reform by analyzing the major innovations of the Tax Code of Ukraine and their comparison with the tax «standards» that operated the implementation of tax reform 2015. Thesis there is determined a number of tax loopholes and nedoopratsyuvan conducted tax reform and their implications for payers of taxes and duties, and the need for further research and improvement. The experience of European countries towards the introduction of electronic filing and processing of tax returns.

CHARM COST-EFFECTIVE HIGH-EFFICIENCY ADVANCED REFORMING MODULE FINAL TECHNICAL REPORT

Energy Technology Data Exchange (ETDEWEB)

Pollica, Darryl; Cross, James C; Sharma, Atul; Shi, Yanlong; Clawson, Lawrence; O' Brien, Chris; Gilhooly, Kara; Kim, Changsik; Quet, Pierre-Francois

2009-09-02

Background Creation of a hydrogen infrastructure is an important prerequisite of widespread fuel cell commercialization, especially for the automotive market. Hydrogen is an attractive fuel since it offers an opportunity to replace petroleum-based fuels, but hydrogen occurs naturally only in chemical compounds like water or hydrocarbons that must be chemically converted to produce it. While an ultimate goal is to produce hydrogen through renewable energy sources, steam methane reforming (SMR) of natural gas is currently the most economical solution to initiate the transition to a hydrogen economy. Centralized hydrogen generation using large industrial SMR plants is already in place to serve customers. Yet, because of the weight and size of cylinders needed to contain hydrogen gas or liquid, transportation of hydrogen may only be economical for short distances. Consequently, distributed natural gas reforming, which trades off the economies of scale of large plants for simplified delivery logistics, is an attractive alternative that could address immediate problems with the lack of hydrogen infrastructure.

Countercurrent soil washing system for remediation of viscous hydrocarbons, heavy metals, radionuclides

International Nuclear Information System (INIS)

Kuhlman, M.I.; Karlsson, M.K.; Downie, C.A.

1995-01-01

Drying augers and multicell DAF tanks are excellent machines in which to countercurrently wash soil and remove hazardous hydrocarbons, metals or radionuclides. An auger works well because it preferentially moves soil along one side of its trough. Thus, when enough high pressure and temperature water jets are placed along that path, contaminants can be melted, or dissolved and scoured from the soil. Contaminants and fines flow down the opposite side of the auger and out for extraction in a series of flotation tanks. Countercurrent washing of the silt results when soil settles in tanks through rising water and air bubbles then is pumped through cyclones placed above the next DAF tank of the series. LNAPLs, DNAPLs, or metallic contaminants made hydrophobic by chemicals in the system are removed at the overflow of the cyclones or by flotation in the tanks. The overflow from the cyclones and DAF tanks flows into the previous tank of the series. Examples of contaminants remediated include; arsenic, cadmium, lead and mercury, Naturally Occurring Radioactive Materials (NORM), uranium, solid oils, polyaromatic hydrocarbons in creosote and coal tars, and polychlorinated hydrocarbons

Modeling of Pem Fuel Cell Systems Including Controls and Reforming Effects for Hybrid Automotive Applications

National Research Council Canada - National Science Library

Boettner, Daisie

2001-01-01

.... This study develops models for a stand-alone Proton Exchange Membrane (PEM) fuel cell stack, a direct-hydrogen fuel cell system including auxiliaries, and a methanol reforming fuel cell system for integration into a vehicle performance simulator...

Reform of the Educational Finance System as the Foundation of Compulsory Education

Science.gov (United States)

Suetomi, Kaori; Murray, Nadezhda

2014-01-01

The conditions required for a reform of the educational finance system as the foundation of compulsory education are 1) devolution to schools and introduction of national standards in order to deal with "individual equality" while compensating for the insufficiency of "aspectual equality," and 2) dealing with educational needs…

Novel Auto thermal Reforming Process for Pure Hydrogen Production

International Nuclear Information System (INIS)

Chen, Z.; Elnashaie, S.S.E.H.

2004-01-01

Steam reforming of heptane for hydrogen production is investigated in a novel Circulating Fluidized Bed Membrane Reformer-Regenerator system (CFBMRR) utilizing a number of hydrogen and oxygen selective membranes. It is shown that although the amount of carbon deposition is significant, the effect on catalyst deactivation is negligible due to the large solid to gas mass feed ratio and the continuous catalyst regeneration in the system. The combustion of the deposited carbon in the catalyst regenerator supplies the heat needed for the endothermic steam reforming as well as the combustion of flammable gases from the riser reformer. Auto thermal operation is achievable for the entire adiabatic reformer-regenerator system when the exothermic heat generated from the regenerator is sufficient to compensate the endothermic heat consumed in the reformer. Multiplicity of the steady states exists in the range of steam to carbon feed ratio of 1.4442.251 mol/mol. The novel configuration has the potential advantages not only with respect to hydrogen production but also energy minimization

Electricity reforms, democracy and technological change. (Electricity systems, 'market liberalization' reforms, internationalisation, and the need for new democratic governance system - the Danish case)

International Nuclear Information System (INIS)

Hvelplund, F.

2001-07-01

At the end of the 1990s, Danish energy policy reached a turning point because of technical challenges due to the high proportion of fluctuating wind power production and the increased cogeneration share, and because of new regulation regimes being introduced in Denmark and its neighbouring countries. In this specific historical situation, with the above background, the questions that will be analysed in this publication are as follows: 1) Which governance systems are most efficient, with regard to achieving optimal goal performance by means of the present typical uranium/fossil fuel electricity supply systems? 2) Which governance systems are the most efficient in the transformation process from the present uranium/fossil fuel electricity supply systems to renewable energy-/conservation based electricity system? 3) Which changes in goal performance of the Danish electricity supply system has the 1999 Danish electricity 'liberalization' reform induced? 4) Will the Danish electricity supply system be able to maintain its consumer ownership institutions and remain independent of the 'third party' shareholder ownership structure after the 1999 Danish 'liberalization' reform? a) Are the Danish electricity companies able to compete on the Danish electricity market with foreign suppliers? b) Will the Danish energy companies be able to compete on the market for energy capital goods, or will foreign companies, for instance German power companies, buy them? Will the Danish consumer ownership model survive? c) Will the Danish 'flat' price structure survive on the future electricity market? d) Will the 1975-2000 energy technology innovation process survive under the new market conditions? How will conditions on the German market influence this development? The relevance of these questions is particulary enhanced when seen in relation to the goals of international, and especially Danish, energy policy. The main question therefore, is: will the development outlined under 1

Electoral System Reform Attempts in Sub-Saharan Africa: South Africa, Lesotho, Kenya, and Zimbabwe

DEFF Research Database (Denmark)

Elklit, Jørgen

This paper provides a test of the generalizability of the barriers’ approach (Rahat and Hazan, 2011) to the study of electoral system reform attempts. It does so by examining a set of recent attempts of electoral system change in four Sub-Saharan countries (South Africa, Lesotho, Kenya...

Healthcare reform: the role of coordinated critical care.

Science.gov (United States)

Cerra, F B

1993-03-01

To evaluate and editorialize the evolving role of the discipline of critical care as a healthcare delivery system in the process of healthcare reform. The sources included material from the Federal Office of Management and Budget, Health Care Financing Review, President Bush's Office, Association of American Medical Colleges, and publications of the Society of Critical Care Medicine. Data were selected that the author felt was relevant to the healthcare reform process and its implications for the discipline of critical care. The data were extracted by the author to illustrate the forces behind healthcare reform, the implications for the practice of critical care, and role of critical care as a coordinated (managed) care system in the process of healthcare reform. Healthcare reform has been initiated because of a number of considerations that arise in evaluating the current healthcare delivery system: access, financing, cost, dissatisfactions with the mechanisms of delivery, and political issues. The reform process will occur with or without the involvement of critical care practitioners. Reforms may greatly alter the delivery of critical care services, education, training, and research in critical care. Critical care has evolved into a healthcare delivery system that provides services to patients who need and request them and provides these services in a coordinated (managed) care model. Critical care practitioners must become involved in the healthcare reform process, and critical care services that are effective must be preserved, as must the education, training, and research programs. Critical care as a healthcare delivery system utilizing a coordinated (managed) care model has the potential to provide services to all patients who need them and to deliver them in a manner that is cost effective and recognized as providing added value.

Experimental evaluation of a Pt based heat exchanger methanol reformer for a HTPEM fuel cell

DEFF Research Database (Denmark)

Andreasen, Søren Juhl; Nielsen, Mads Pagh; Kær, Søren Knudsen

2007-01-01

The storage of hydrogen in hydrogen consuming applications is often inconvenient because of the very low density of hydrogen even at high pressures (0.014 kg/L @ 300 bar) or cryogenically (0.043 kg/L). Much higher volumetric energy densities can be achieved using liquid hydrocarbons as e.g. metha...... (up to 1-2%). This work examines the possibility of using a catalyst coated plate heat exchanger for the reforming process of methanol....

Performance evaluation of a proof-of-concept 70 W internal reforming methanol fuel cell system

Science.gov (United States)

Avgouropoulos, G.; Schlicker, S.; Schelhaas, K.-P.; Papavasiliou, J.; Papadimitriou, K. D.; Theodorakopoulou, E.; Gourdoupi, N.; Machocki, A.; Ioannides, T.; Kallitsis, J. K.; Kolb, G.; Neophytides, S.

2016-03-01

A proof-of-concept 70 W Internal Reforming Methanol Fuel Cell (IRMFC) stack including Balance-of-Plant (BoP) was designed, assembled and tested. Advent TPS® high-temperature, polymer electrolyte membrane electrode assemblies were employed for fuel cell operation at 200 °C. In order to avoid phosphoric acid poisoning of the reformer, the anode electrocatalyst of each cell was indirectly adjoined, via a separation plate, to a highly active CuMnAlOx catalyst coated onto copper foam, which served as methanol reforming layer. The reformer was in-situ converting the methanol/steam feed to the required hydrogen (internal reforming concept) at 200 °C, which was readily oxidized at the anode electrodes. The operation of the IRMFC was supported through a number of BoP components consisting of a start-up subsystem (air blower, evaporator and monolithic burner), a combined afterburner/evaporator device, methanol/water supply and data acquisition units (reactants/products analysis, temperature control, flow control, system load/output control). Depending on the composition of the liquid MeOH/H2O feed streams, current densities up to 0.18 A cm-2 and power output up to 70 W could be obtained with remarkable repeatability. Specific targets for improvement of the efficiency were identified.

Bifurcation behavior during the hydrogen production in two compatible configurations of a novel circulating fluidized bed membrane reformer

International Nuclear Information System (INIS)

Chen, Z.; Elnashaie, S.S.

2004-01-01

'Full text:' Multiplicity of steady states (Static Bifurcation Behavior, SBB) in a novel Circulating Fluidized Bed (CFB) membrane reformer for the efficient production of hydrogen by steam reforming of heptane (model component of heavy hydrocarbons and renewable bio-oils) is investigated. The present paper highlights the practical implications of this phenomenon on the behavior of this novel reformer with special focusing on hydrogen production. Two configurations are considered and compared. One is with the catalyst regeneration before the gas-solid separation and the other one is with the catalyst regeneration after the gas-solid separation. Multiplicity of the steady states prevails over a number of design and operating parameters with important impact on the reformer performance. The basis of process evaluation is focused on the net hydrogen production. The dependence of the behavior of this autothermal CFB is shown to be quite complex and defy the simple logic of non-autothermal processes. The unit can be a very efficient hydrogen producer provided its bifurcation behavior is well understood and correctly exploited. (author)

Public Administration reforms and results

Directory of Open Access Journals (Sweden)

Gunnar Helgi Kristinsson

2014-12-01

Full Text Available Research on administrative reforms during the past thirty years indicates that reform efforts of countries differ. The Anglo Saxon states were at the forefront of the New Public Management movement while countries on mainland Europe were more hesitant and moved further towards the Neo-Weberian state. Academics have tried to explain different reform efforts within countries by looking at political, historical and cultural issues, values and economic factors to name just a few. Three hypotheses are put forward to explain reform efforts in different states. This research involves analysing the implementation of two different reform trends, New Public Management and the Neo-Weberian tradition. The analysis indicates that countries vary in their commitment to reform rather than in the emphasis on either New Public Management or the Neo-Weberian State. Decentralization, clear objectives and consultation with communities and experts are closely related to national reform efforts. However, Iceland does distinguish itself from Europe and the Nordic countries. The analysis reveals that although decentralization is high in the Icelandic system, autonomy of agencies does not have a strong relation to a varied use of administrative instruments. The second part of the article focuses on the results and achievements of reform programmes. The achievement of reform programmes are examined in relation to theories of bounded rationality, street level bureaucracy (bottom up and consensus decision making. Three hypotheses are presented and tested to explain what causes reforms programmes to be successful in some countries and not in others. The analysis reveals that countries are more likely to succeed if bounded rationality is applied with careful preparation and when stakeholders are consulted.

The New Russian Budget System; A Critical Assessment and Future Reform Agenda

OpenAIRE

Jack Diamond

2002-01-01

This paper documents the main elements of the new budget system established in the Russian Federation through its revised budget system law, or the Budget Code, of 2000. It critically examines the budget preparation, budget approval, and budget execution processes, as well as the financial management and planning procedures that underlie the Budget Code. Based on this analysis, recent developments are discussed and a future reform agenda is indicated.

The Police System Reform in Georgia (Informal Power its Forms, Types and Spheres of Influence

Directory of Open Access Journals (Sweden)

Charkviani Tamar

2014-12-01

Full Text Available It is a widely accepted notion that the major change brought by the 2003 November revolution in Georgia was the reform of the public services. Two major tasks were to be achieved for the state institutions: to monopolize the use of legitimate power on the state territory and to start providing services to the citizens. Police reform was at the heart of both these objectives. The major obstacle identified on the way of this reform was corruption. Indeed it was widely known that posts in police forces were to be purchased; policemen were involved in organized crime, extortion, and other illegal pursuits. But the corruption itself was the effect of the broader system in which patrimonial system of not distinguishing between the public office and private sphere was hybridized with the legal-rational rule, having its origin in the Soviet Union. The main subject of our research is to analyze the model of informal power network in Georgian police, to describe its configurations and identify its social actors.

Pension Reforms in Countries with Developed and Transitional Economies

Directory of Open Access Journals (Sweden)

Sergey Anatolyevich Belozyorov

2015-12-01

Full Text Available The subject matter of the research is as follows: pension reforms conducted by some states define the transformation of pension systems. The choice of countries is stipulated by the fact that each of them has different types of pension systems and preconditions for reforms. The purpose is to develop an approach that allows comparing and evaluating changes in disparate systems. The hypothesis is that the ongoing pension reforms, regardless of initial conditions and their type lead to a similar trajectory of pension systems development in all countries. The methodology rests on the comparative analysis that was carried out on the basis of a single algorithm that allows to determine significant modifiable parameters and the overall direction of reform. The novelty is that the authors research the ongoing pension reform from the viewpoint of pension rights formation and distribution of risks. The results are a single trajectory of reforms implementation for the studied countries, which confirms the authors’ hypothesis. The specific features of the Russian pension system do not affect the reform trajectory, which is similar to all countries. The conclusions are the following: the reducing pressure on pension system requires increasing revenues and limiting the number of potential participants. This is achieved by expanding sources of financing, increasing the dependence of pension on an employee’s contributions, transferring the risks of old age into the individual level, and employment motivation during the retirement period. The principle of the intergenerational solidarity loses its value. The obtained results can be used for the pension reform modification in the Russian Federation, the development of voluntary pension insurance based on the experience of other countries and risks faced by the modern Russian pension system.

A system for transportation of hydrocarbons at sea; System for transport av hydrokarboner til havs

Energy Technology Data Exchange (ETDEWEB)

Breivik, K.; Smedal, A.

1997-04-01

To exploit the offshore oil and gas fields economically it is important to use suitable methods and equipment for transporting the oil and gas to the landing sites. The present invention concerns a system for transportation of hydrocarbons to the landing sites. It consists of one or more loading buoys and a number of preferably conventional tankers and at least one offshore loading ship arranged to receive hydrocarbons from the loading buoy to which it is connected by means of a coupling device in the ship`s bow. The tankers have in their sterns arrangements to convey the fluid through flexible tubes from complementary arrangements in the bow of the loading ship. The loading ship and the tanker have a position reference system for mutual dynamical positioning. The entire operation of connecting the tubes and transferring the fluid flow takes place with both ships moving, at least at steerage way. The invention aims to provide efficient use of the expensive special ships that are needed to communicate with the loading buoys. Another aim is to reduce the need for expensive specialized equipment onboard both the loading ships and the tankers. 5 figs.

Out-of-pile demonstration test of HTTR hydrogen production system structure and fabrication technology of steam reformer. Contract research

International Nuclear Information System (INIS)

Inagaki, Yoshiyuki; Ouchi, Yoshihiro; Fujisaki, Katsuo; Kato, Michio; Uno, Hisao; Hayashi, Koji; Aita, Hideki

1999-10-01

A hydrogen production system by steam reforming of natural gas, chemical reaction; CH 4 +H 2 O = 3H 2 +CO, is to be the first heat utilization system of the HTTR. Prior to coupling of the steam reforming system with the HTTR, an out-of-pile test facility is presently under construction in order to confirm safety, controllability and performance of the steam reforming system under simulated operational conditions of the HTTR hydrogen production system. The out-of-pile test facility, using an electric heater as a reactor substitute, simulates key components downstream an intermediate heat exchanger of the HTTR hydrogen production system on a scale of 1 to 30 with a hydrogen production rate of 110 Nm 3 /h. A steam reformer (SR) is a key component to produce hydrogen by steam reforming of natural gas. A bayonet-type catalyst tube was applied to the SR of the out-of-pile test facility in order to enhance the heat utilization rate. Also to promote heat transfer, the thickness of the catalyst tube should be decreased to 10 mm while augmenting heat transfer by fins formed on the outer surface of the catalyst tube. Therefore, the catalyst tube was designed on the basis of pressure difference between helium and process gases instead of total pressure of them. This design method was authorized for the first time in Japan. Furthermore, a function of explosion proof was applied to the SR because it contains inflammable gas and electric heater. This report describes the structure of the SR as well as the authorization both of the design method of the catalyst tube and the explosion proof function of the SR. (author)

Method of preparing and utilizing a catalyst system for an oxidation process on a gaseous hydrocarbon stream

Science.gov (United States)

Berry, David A; Shekhawat, Dushyant; Smith, Mark; Haynes, Daniel

2013-07-16

The disclosure relates to a method of utilizing a catalyst system for an oxidation process on a gaseous hydrocarbon stream with a mitigation of carbon accumulation. The system is comprised of a catalytically active phase deposited onto an oxygen conducting phase, with or without supplemental support. The catalytically active phase has a specified crystal structure where at least one catalytically active metal is a cation within the crystal structure and coordinated with oxygen atoms within the crystal structure. The catalyst system employs an optimum coverage ratio for a given set of oxidation conditions, based on a specified hydrocarbon conversion and a carbon deposition limit. Specific embodiments of the catalyst system are disclosed.

Aromatic hydrocarbons

International Nuclear Information System (INIS)

Roder, M.

1985-01-01

Papers dealing with radiolysis of aromatic hydrocarbons of different composition (from benzene to terphenyls and hydrocarbons with condensed rings) as well as their mixtures (with alkanes, alkenes, other aromatic hydrocarbons) are reviewed. High radiation stability of aromatic hydrocarbons in condensed phases associated with peculiarities of molecular structure of compounds is underlined. Mechanisms of radiolytic processes, vaues of product yields are considered

JP8 Reformation for Combat Vehicles

Science.gov (United States)

2007-08-07

phase (fuel), and a gas phase (hydrogen) at elevated pressures. • Trickle - bed configuration is difficult to model and scale down—not practical for...gases output from HDS reactor are used to fuel the reformer. Current Technology Status: •Integrated desulfurization/reforming system successfully

Effects of Medicare payment reform: evidence from the home health interim and prospective payment systems.

Science.gov (United States)

Huckfeldt, Peter J; Sood, Neeraj; Escarce, José J; Grabowski, David C; Newhouse, Joseph P

2014-03-01

Medicare continues to implement payment reforms that shift reimbursement from fee-for-service toward episode-based payment, affecting average and marginal payment. We contrast the effects of two reforms for home health agencies. The home health interim payment system in 1997 lowered both types of payment; our conceptual model predicts a decline in the likelihood of use and costs, both of which we find. The home health prospective payment system in 2000 raised average but lowered marginal payment with theoretically ambiguous effects; we find a modest increase in use and costs. We find little substantive effect of either policy on readmissions or mortality. Copyright © 2014 Elsevier B.V. All rights reserved.

What Is the “China Model” of Financial Reform?

Institute of Scientific and Technical Information of China (English)

应展宇

2008-01-01

Based on a comparative study of China’s three-decade financial system reform and the financial reform model of Russia and selected Eastern European countries, we found noticeable discrepancies between China and other transitional countries in respect to objective setting, path and sequence selection, power sources and advancement strategy. We conclude that a "China model" of nancial system reform does exist. The formation and evolution of the "China model" is closely related to China’s special political and economic environment. More importantly, it is significantly influenced by China’s overall economic reform model as well.

Liquid-liquid equilibria for binary and ternary systems containing glycols, aromatic hydrocarbons, and water: Experimental measurements and modeling with the CPA EoS

DEFF Research Database (Denmark)

Folas, Georgios; Kontogeorgis, Georgios; Michelsen, Michael Locht

2006-01-01

Liquid-liquid equilibrium data of four binary glycol + aromatic hydrocarbon systems and three ternary systems containing water have been measured at atmospheric pressure. The measured systems are monoethylene glycol (MEG) + benzene or toluene, triethylene glycol (TEG) + benzene or toluene, MEG...... + water + benzene, MEG + water + toluene, and TEG + water + toluene. The binary systems are correlated with the Cubic-Plus-Association (CPA) equation of state while the ternary systems are predicted from interaction parameters obtained from the binary systems. Very satisfactory liquid-liquid equilibrium...... correlations are obtained for the binary systems using temperature-independent interaction parameters, while adequate predictions are achieved for multicomponent water + glycol + aromatic hydrocarbons systems when accounting for the solvation between the aromatic hydrocarbons and glycols or water....

The Impact of Electoral System Reform on Taiwan’s Local Factions

Directory of Open Access Journals (Sweden)

Christian Göbel

2012-01-01

Full Text Available In 2004, the single non-transferable vote (SNTV was abolished in Taiwan. The SNTV had long been seen as a major factor in the sustenance of county- and township-level clientelist networks (“local factions”. It was also associated with phenomena such as extremism, candidate-centred politics, vote-buying, clientelism and organized crime involvement in politics. More recent scholarship, however, has led to doubts that a single formal institution like an electoral system could have such a powerful influence on electoral mobilization. This article puts these positions to an initial test. It examines the impact of the electoral reform on the mobilization capacity of a local faction in a rural county notorious for its factionalism. By illuminating its intricate mobilization structures, it provides support for the second position: These structures are too resilient to be affected by even a radical electoral reform.

33 CFR 157.166 - Hydrocarbon emissions.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Hydrocarbon emissions. 157.166 Section 157.166 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED... Crude Oil Washing (COW) System on Tank Vessels Cow Operations § 157.166 Hydrocarbon emissions. If the...

Development, investigation and modelling of a micro reformer as part of a system for off-grid power supply with PEM fuel cells

Energy Technology Data Exchange (ETDEWEB)

Rochlitz, Lisbeth

2008-11-18

In this thesis a micro reformer fuel cell system ({mu}RFCS) for 300 Wel off-grid power supply, fuelled with bioethanol, was simulated, designed, developed and investigated in a test-rig. First a literature study was carried through to point out the specific characteristics of micro reforming, the most important being heat transfer, and present the systems currently under research and already on the market. As a next step, the processes of the RFCS were simulated with the commercial simulation tool CHEMCAD. This comprised thermodynamic equilibrium simulations for the separate reactions of steam reforming, water gas shift and selective methanation. It also included a simulation of the complete {mu}RFCS with thermodynamic equilibrium for all reactors and assumed values for heat loss and fuel cell efficiency. The resulting net electrical efficiency was 24%. As a third step, a reaction pathway scheme with parallel and serial reactions for the steam reforming reaction of ethanol was simulated, developed, evaluated and proven plausible by matching the simulation to experimental results obtained in the {mu}RFCS test rig. The equilibrium simulations were used to evaluate the catalyst screening carried through for reformer, water gas shift and selective methanation catalysts. The catalysts for the {mu}RFCS were chosen and the optimum operating conditions determined by the screening tests. Having accomplished the simulation and design of the system, the largest proportion of this work was spent on the construction, set-up, testing and evaluation of the complete {mu}RFCS. The focus for the evaluations lay on the reformer side of the system. The technical feasibility was demonstrated for an ethanol/water mix of 3 ml/min at S/C 3. The first tests without optimized heat and water management between the reformer system and the fuel cell system resulted in power output of around 115 W{sub el}, at a total electrical efficiency of 31%. (orig.)

Next generation of individual account pension reforms in Latin America.

Science.gov (United States)

Kritzer, Barbara E; Kay, Stephen J; Sinha, Tapen

2011-01-01

Latin America led the world in introducing individual retirement accounts intended to complement or replace defined benefit state-sponsored, pay-as-you-go systems. After Chile implemented the first system in 1981, a number of other Latin American countries incorporated privately managed individual accounts as part of their retirement income systems beginning in the 1990s. This article examines the subsequent "reform of the reform" of these pension systems, with a focus on the recent overhaul of the Chilean system and major reforms in Mexico, Peru, and Colombia. The authors analyze key elements of pension reform in the region relating to individual accounts: system coverage, fees, competition, investment, the impact of gender on benefits, financial education, voluntary savings, and payouts.

On residents' satisfaction with community health services after health care system reform in Shanghai, China, 2011.

Science.gov (United States)

Li, Zhijian; Hou, Jiale; Lu, Lin; Tang, Shenglan; Ma, Jin

2012-01-01

Health care system reform is a major issue in many countries and therefore how to evaluate the effects of changes is incredibly important. This study measured residents' satisfaction with community health care service in Shanghai, China, and aimed to evaluate the effect of recent health care system reform. Face-to-face interviews were performed with a stratified random sample of 2212 residents of the Shanghai residents using structured questionnaires. In addition, 972 valid responses were retrieved from internet contact. Controlling for sex, age, income and education, the study used logistic regression modeling to analyze factors associated with satisfaction and to explain the factors that affect the residents' satisfaction. Comparing current attitudes with those held at the initial implementation of the reform in this investigation, four dimensions of health care were analyzed: 1) the health insurance system; 2) essential drugs; 3) basic clinical services; and 4) public health services. Satisfaction across all dimensions improved since the reform was initiated, but differences of satisfaction level were found among most dimensions and groups. Residents currently expressed greater satisfaction with clinical service (average score=3.79, with 5 being most satisfied) and the public health/preventive services (average score=3.62); but less satisfied with the provision of essential drugs (average score=3.20) and health insurance schemes (average score=3.23). The disadvantaged groups (the elderly, the retired, those with only an elementary education, those with lower incomes) had overall poorer satisfaction levels on these four aspects of health care (Phealth services/interventions (average score=3.79); and less satisfaction with the health insurance system (average score=3.23) and the essential drug system (average score=3.20). Disadvantaged groups showed lower satisfaction levels overall relative to non-disadvantaged groups.

On residents’ satisfaction with community health services after health care system reform in Shanghai, China, 2011

Directory of Open Access Journals (Sweden)

Li Zhijian

2012-06-01

Full Text Available Abstract Background Health care system reform is a major issue in many countries and therefore how to evaluate the effects of changes is incredibly important. This study measured residents’ satisfaction with community health care service in Shanghai, China, and aimed to evaluate the effect of recent health care system reform. Methods Face-to-face interviews were performed with a stratified random sample of 2212 residents of the Shanghai residents using structured questionnaires. In addition, 972 valid responses were retrieved from internet contact. Controlling for sex, age, income and education, the study used logistic regression modeling to analyze factors associated with satisfaction and to explain the factors that affect the residents’ satisfaction. Results Comparing current attitudes with those held at the initial implementation of the reform in this investigation, four dimensions of health care were analyzed: 1 the health insurance system; 2 essential drugs; 3 basic clinical services; and 4 public health services. Satisfaction across all dimensions improved since the reform was initiated, but differences of satisfaction level were found among most dimensions and groups. Residents currently expressed greater satisfaction with clinical service (average score=3.79, with 5 being most satisfied and the public health/preventive services (average score=3.62; but less satisfied with the provision of essential drugs (average score=3.20 and health insurance schemes (average score=3.23. The disadvantaged groups (the elderly, the retired, those with only an elementary education, those with lower incomes had overall poorer satisfaction levels on these four aspects of health care (P Conclusion The respondents showed more satisfaction with the clinical services (average score=3.79 and public health services/interventions (average score=3.79; and less satisfaction with the health insurance system (average score=3.23 and the essential drug system

Health sector reform in Argentina: a cautionary tale.

Science.gov (United States)

Lloyd-Sherlock, Peter

2005-04-01

In November 2002 the World Bank published a report on the Argentine health sector. The report accurately portrays the complexity and severity of the problems facing the health care system. It stresses that these problems are not purely a product of the country's economic collapse, noting that the system has suffered from long-standing structural problems and inefficiencies. Curiously, the report makes no mention of the leading role played by the World Bank in health reform efforts during the 1990s. This paper demonstrates that these reforms did much to worsen pre-existing weaknesses of the sector. The paper criticises the content of the reform agenda and the manner in which it was produced, arguing that these were reforms in which considerations of public health were less significant than conformity to the wider model of neo-liberal social and economic development prevailing at the time. It also highlights problems of implementing the reform agenda, which reduced the coherency of the reforms. The paper goes on to examine the impact of the crisis, noting links with the preceding reforms. It identifies a number of insights and lessons of potential value to other countries which are pursuing similar policies.

Radiolysis of hydrocarbons in liquid phase (Modern state of problem)

International Nuclear Information System (INIS)

Saraeva, V.V.

1986-01-01

Problems of ionizing radiation effect on hydrocarbons and hydrocarbon systems in a liquid phase are considered. Modern representations on the mechanism of hydrocarbon radiolysis are presented. Electron moderation and ion-electron pair formation, behaviour of charged particles, excited states, radical formation and their reactions are discussed. Behaviour of certain hydrocarbon classes: alkanes, cyclic hydrocarbons, olefines, aromatic hydrocarbons as well as different hydrocarbon mixtures is considered in detail. Radiation-chemical changes in organic coolants and ways of increasing radiation resistance are considered. Polyphenyl compounds are noted to be most perspective here

Validity Theory: Reform Policies, Accountability Testing, and Consequences

Science.gov (United States)

Chalhoub-Deville, Micheline

2016-01-01

Educational policies such as Race to the Top in the USA affirm a central role for testing systems in government-driven reform efforts. Such reform policies are often referred to as the global education reform movement (GERM). Changes observed with the GERM style of testing demand socially engaged validity theories that include consequential…

The Difficult Transition of the Italian University System: Growth, Underfunding and Reforms

Science.gov (United States)

Turri, Matteo

2016-01-01

The evolution of Italian universities in terms of growth, economic sustainability and reforms can be interpreted in the light of the élite, mass and universal access categories defined by Martin Trow. The findings from this analysis show that although the number of enrolled students and funding problems propel the Italian university system towards…

Hydrocarbon toxicity: an analysis of AAPCC TESS data.

Science.gov (United States)

Cobaugh, Daniel J; Seger, Donna L; Krenzelok, Edward P

2007-01-01

Human hydrocarbon exposures have the potential to cause significant morbidity and mortality. To determine which hydrocarbons were associated with the most severe adverse outcomes, human exposure data reported to American poison information centers were analyzed. Outcome data for single-substance, hydrocarbon exposures reported to the American Association of Poison Control Centers Toxic Exposure Surveillance System from 1994 through 2003 were analyzed. Only cases with definitive medical outcomes were included. Analyses were stratified by five age groups: 59 years. Hazard factors were determined by calculating the sum of the major effects and fatalities for each hydrocarbon category and dividing this by the total number of exposures for that category. To normalize the data, the overall rate of major effects and deaths for each age group was assigned hazard factor value of 1. Hydrocarbon categories with a HF of > or = 1.5 were included in the final analyses. Estimated rates of major effect and fatal outcomes (outcomes/1000 people) were also calculated. 318,939 exposures were analyzed. Exposures to benzene, toluene/xylene, halogenated hydrocarbons, kerosene and lamp oil resulted in the highest hazard factor values. These data demonstrate that hydrocarbons that are absorbed systemically and those with low viscosities are associated with higher hazard factors. The risks associated with hydrocarbons often implicated in abuse by older children and adolescents are also confirmed.

Evidence-based health policy: three generations of reform in Mexico.

Science.gov (United States)

Frenk, Julio; Sepúlveda, Jaime; Gómez-Dantés, Octavio; Knaul, Felicia

2003-11-15

The Mexican health system has evolved through three generations of reform. The creation of the Ministry of Health and the main social security agency in 1943 marked the first generation of health reforms. In the late 1970s, a second generation of reforms was launched around the primary health-care model. Third-generation reforms favour systemic changes to reorganise the system through the horizontal integration of basic functions-stewardship, financing, and provision. The stability of leadership in the health sector is emphasised as a key element that allowed for reform during the past 60 years. Furthermore, there has been a transition in the second generation of reforms to a model that is increasingly based on evidence; this has been intensified and extended in the third generation of reforms. We also examine policy developments that will provide social protection in health for all. These developments could be of interest for countries seeking to provide their citizens with universal access to health care that incorporates equity, quality, and financial protection.

Railway Reform in China.

OpenAIRE

Wu, J. H.; Nash, C.

1998-01-01

The purpose of this working paper is to consider the current situation of Chinese Railways, the progress of reforms to date, and possible future developments. The first section describes the current problems of Chinese Railways, as a vast organisation subject to strong central control, facing enormous and rapidly growing demands which it is unable to satisfy. The progress of reform in Chinese Railways to date, and in particular the Economic Contract Responsibility System instituted in the lat...

Electorate redistricting for a single-member district plurality, two-ballot voting system: Taiwan’s electoral reform

Directory of Open Access Journals (Sweden)

Lin Pei-Chun

2014-01-01

Full Text Available In this study, we formulated a mathematical model for electorate demarcation in line with Taiwan’s electoral reforms, minimizing legislative seats for the main opposition party in Taipei City. The model is compared with historical election data to establish characteristics that are most contested and germane to the reform. Examination of the constituency demarcation for the Seventh Legislator Election ascertains that electorate demarcation can/can not be manipulated to create electoral advantage. Demonstrable evidence of a bias toward disproportionate representation in the single-member district plurality, two-ballot voting system ultimately attests the importance of scenario analysis before adopting new electorate systems.

ECO LOGIC INTERNATIONAL GAS-PHASE CHEMICAL REDUCTION PROCESS - THE REACTOR SYSTEM - APPLICATIONS ANALYSIS REPORT

Science.gov (United States)

The ELI Eco Logic International Inc. (Eco Logic) process thermally separates organics, then chemically reduces them in a hydrogen atmosphere, converting them to a reformed gas that consists of light hydrocarbons and water. A scrubber treats the reformed gas to remove hydrogen chl...

Solving Disparities Through Payment And Delivery System Reform: A Program To Achieve Health Equity.

Science.gov (United States)

DeMeester, Rachel H; Xu, Lucy J; Nocon, Robert S; Cook, Scott C; Ducas, Andrea M; Chin, Marshall H

2017-06-01

Payment systems generally do not directly encourage or support the reduction of health disparities. In 2013 the Finding Answers: Solving Disparities through Payment and Delivery System Reform program of the Robert Wood Johnson Foundation sought to understand how alternative payment models might intentionally incorporate a disparities-reduction component to promote health equity. A qualitative analysis of forty proposals to the program revealed that applicants generally did not link payment reform tightly to disparities reduction. Most proposed general pay-for-performance, global payment, or shared savings plans, combined with multicomponent system interventions. None of the applicants proposed making any financial payments contingent on having successfully reduced disparities. Most applicants did not address how they would optimize providers' intrinsic and extrinsic motivation to reduce disparities. A better understanding of how payment and care delivery models might be designed and implemented to reduce health disparities is essential. Project HOPE—The People-to-People Health Foundation, Inc.

Out-of-pile demonstration test of HTTR hydrogen production system structure and fabrication technology of steam reformer. Contract research

Energy Technology Data Exchange (ETDEWEB)

Inagaki, Yoshiyuki; Ouchi, Yoshihiro; Fujisaki, Katsuo; Kato, Michio; Uno, Hisao; Hayashi, Koji; Aita, Hideki [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment

1999-10-01

A hydrogen production system by steam reforming of natural gas, chemical reaction; CH{sub 4}+H{sub 2}O = 3H{sub 2}+CO, is to be the first heat utilization system of the HTTR. Prior to coupling of the steam reforming system with the HTTR, an out-of-pile test facility is presently under construction in order to confirm safety, controllability and performance of the steam reforming system under simulated operational conditions of the HTTR hydrogen production system. The out-of-pile test facility, using an electric heater as a reactor substitute, simulates key components downstream an intermediate heat exchanger of the HTTR hydrogen production system on a scale of 1 to 30 with a hydrogen production rate of 110 Nm{sup 3}/h. A steam reformer (SR) is a key component to produce hydrogen by steam reforming of natural gas. A bayonet-type catalyst tube was applied to the SR of the out-of-pile test facility in order to enhance the heat utilization rate. Also to promote heat transfer, the thickness of the catalyst tube should be decreased to 10 mm while augmenting heat transfer by fins formed on the outer surface of the catalyst tube. Therefore, the catalyst tube was designed on the basis of pressure difference between helium and process gases instead of total pressure of them. This design method was authorized for the first time in Japan. Furthermore, a function of explosion proof was applied to the SR because it contains inflammable gas and electric heater. This report describes the structure of the SR as well as the authorization both of the design method of the catalyst tube and the explosion proof function of the SR. (author)

Dynamic Modeling of a Reformed Methanol Fuel Cell System using Empirical Data and Adaptive Neuro-Fuzzy Inference System Models

DEFF Research Database (Denmark)

Justesen, Kristian Kjær; Andreasen, Søren Juhl; Shaker, Hamid Reza

2013-01-01

In this work, a dynamic MATLAB Simulink model of a H3-350 Reformed Methanol Fuel Cell (RMFC) stand-alone battery charger produced by Serenergy is developed on the basis of theoretical and empirical methods. The advantage of RMFC systems is that they use liquid methanol as a fuel instead of gaseous...... of the reforming process are implemented. Models of the cooling flow of the blowers for the fuel cell and the burner which supplies process heat for the reformer are made. The two blowers have a common exhaust, which means that the two blowers influence each other’s output. The models take this into account using...... an empirical approach. Fin efficiency models for the cooling effect of the air are also developed using empirical methods. A fuel cell model is also implemented based on a standard model which is adapted to fit the measured performance of the H3-350 module. All the individual parts of the model are verified...

Dynamic Modeling of a Reformed Methanol Fuel Cell System using Empirical Data and Adaptive Neuro-Fuzzy Inference System Models

DEFF Research Database (Denmark)

Justesen, Kristian Kjær; Andreasen, Søren Juhl; Shaker, Hamid Reza

2014-01-01

In this work, a dynamic MATLAB Simulink model of a H3-350 Reformed Methanol Fuel Cell (RMFC) stand-alone battery charger produced by Serenergy is developed on the basis of theoretical and empirical methods. The advantage of RMFC systems is that they use liquid methanol as a fuel instead of gaseous...... of the reforming process are implemented. Models of the cooling flow of the blowers for the fuel cell and the burner which supplies process heat for the reformer are made. The two blowers have a common exhaust, which means that the two blowers influence each other’s output. The models take this into account using...... an empirical approach. Fin efficiency models for the cooling effect of the air are also developed using empirical methods. A fuel cell model is also implemented based on a standard model which is adapted to fit the measured performance of the H3-350 module. All the individual parts of the model are verified...

Optrode for sensing hydrocarbons

Science.gov (United States)

Miller, H.; Milanovich, F.P.; Hirschfeld, T.B.; Miller, F.S.

1988-09-13

A two-phase system employing the Fujiwara reaction is provided for the fluorometric detection of halogenated hydrocarbons. A fiber optic is utilized to illuminate a column of pyridine trapped in a capillary tube coaxially attached at one end to the illuminating end of the fiber optic. A strongly alkaline condition necessary for the reaction is maintained by providing a reservoir of alkali in contact with the column of pyridine, the surface of contact being adjacent to the illuminating end of the fiber optic. A semipermeable membrane caps the other end of the capillary tube, the membrane being preferentially permeable to the halogenated hydrocarbon and but preferentially impermeable to water and pyridine. As the halogenated hydrocarbon diffuses through the membrane and into the column of pyridine, fluorescent reaction products are formed. Light propagated by the fiber optic from a light source, excites the fluorescent products. Light from the fluorescence emission is also collected by the same fiber optic and transmitted to a detector. The intensity of the fluorescence gives a measure of the concentration of the halogenated hydrocarbons. 5 figs.

Curricular Reform: Systems Modeling and Sustainability in Civil and Environmental Engineering at the University of Vermont

Science.gov (United States)

Rizzo, D. M.; Hayden, N. J.; Dewoolkar, M.; Neumann, M.; Lathem, S.

2009-12-01

Researchers at the University of Vermont were awarded a NSF-sponsored Department Level Reform (DLR) grant to incorporate a systems approach to engineering problem solving within the civil and environmental engineering programs. A systems approach challenges students to consider the environmental, social, and economic aspects within engineering solutions. Likewise, sustainability requires a holistic approach to problem solving that includes economic, social and environmental factors. Our reform has taken a multi-pronged approach in two main areas that include implementing: a) a sequence of three systems courses related to environmental and transportation systems that introduce systems thinking, sustainability, and systems analysis and modeling; and b) service-learning (SL) projects as a means of practicing the systems approach. Our SL projects are good examples of inquiry-based learning that allow students to emphasize research and learning in areas of most interest to them. The SL projects address real-world open-ended problems. Activities that enhance IT and soft skills for students are incorporated throughout the curricula. Likewise, sustainability has been a central piece of the reform. We present examples of sustainability in the SL and modeling projects within the systems courses (e.g., students have used STELLA™ systems modeling software to address the impact of different carbon sequestration strategies on global climate change). Sustainability in SL projects include mentoring home schooled children in biomimicry projects, developing ECHO exhibits and the design of green roofs, bioretention ponds and porous pavement solutions. Assessment includes formative and summative methods involving student surveys and focus groups, faculty interviews and observations, and evaluation of student work.

Toward a 21st-century health care system: Recommendations for health care reform

NARCIS (Netherlands)

K. Arrow (Kenneth); A. Auerbach (Alan); J. Bertko (John); L.P. Casalino (Lawrence Peter); F.J. Crosson (Francis); A. Enthoven (Alain); E. Falcone; R.C. Feldman; V.R. Fuchs (Victor); A.M. Garber (Alan); M.R. Gold (Marthe Rachel); D.A. Goldman; G.K. Hadfield (Gillian); M.A. Hall (Mark Ann); R.I. Horwitz (Ralph); M. Hooven; P.D. Jacobson (Peter); T.S. Jost (Timothy Stoltzfus); L.J. Kotlikoff; J. Levin (Jonathan); S. Levine (Sharon); R. Levy; K. Linscott; H.S. Luft; R. Mashal; D. McFadden (Daniel); D. Mechanic (David); D. Meltzer (David); J.P. Newhouse (Joseph); R.G. Noll (Roger); J.B. Pietzsch (Jan Benjamin); P. Pizzo (Philip); R.D. Reischauer (Robert); S. Rosenbaum (Sara); W. Sage (William); L.D. Schaeffer (Leonard Daniel); E. Sheen; B.N. Silber (Bernie Michael); J. Skinner (Jonathan Robert); S.M. Shortell (Stephen); S.O. Thier (Samuel); S. Tunis (Sean); L. Wulsin Jr.; P. Yock (Paul); G.B. Nun; S. Bryan (Stirling); O. Luxenburg (Osnat); W.P.M.M. van de Ven (Wynand); J. Cooper (Jim)

2009-01-01

textabstractThe coverage, cost, and quality problems of the U.S. health care system are evident. Sustainable health care reform must go beyond financing expanded access to care to substantially changing the organization and delivery of care. The FRESH-Thinking Project (www.fresh-thinking.org) held a

Education Reform: Ten Years after the Massachusetts Education Reform Act of 1993

Directory of Open Access Journals (Sweden)

Linda Driscoll, Joseph B. Berger, Ronald K. Hambleton, Lisa A. Keller, Robert W. Maloy, David Hart, Paul Oh, Victoria Getis, Susan Bowles, Francis L. Gougeon, Kathryn A. McDermott, Andrew Churchill

2005-02-01

Full Text Available In June 1993, Governor William Weld signed into law the Massachusetts Education Reform Act (MERA. MERA greatly increased the state role both in funding public education and in guiding the local educational process. The state’s role changed to incorporate setting curriculum frameworks and holding schools accountable for student performance. Because MERA was designed to be a systemic reform of education, all of the various state activities and policies needed to fit together into a coherent whole based on state educational standards.

The Anthropology of Science Education Reform: An Alabama Model for Building an Integrated Stakeholder Systems Approach

Science.gov (United States)

Denson, R. L.; Cox, G. N.

2004-12-01

Anthropologists are concerned with every aspect of the culture they are investigating. One of the five main branches of anthropology, socio-cultural anthropology, concerns itself with studying the relationship between behavior and culture. This paper explores the concept that changing the behavior of our culture - its beliefs and values - towards science is at the heart of science education reform. There are five institutions that socio-cultural anthropologists use to study the social organization of cultures: the educational system is only one of them. Its function - across all cultures - is to serve as a mechanism for implementing change in cultural beliefs and values. As leaders of science education reform, the Alabama model contends that we must stop the struggle with our purpose and get on with the business of leading culture change through an integrated stakeholder systems approach. This model stresses the need for the interaction of agencies other than education - including government, industry, the media and our health communities to operate in an integrated and systemic fashion to address the issues of living among a technically literate society. Twenty-five years of science education reform needs being voiced and programs being developed has not produced the desired results from within the educational system. This is too limited a focus to affect any real cultural change. It is when we acknowledge that students spend only an average of 12 percent of their life time in schools, that we can begin to ask ourselves what are our students learning the other 88 percent of their time - from their peers, their parents and the media - and what should we be doing to address this cultural crisis in these other arenas in addition to the educational system? The Alabama Math, Science and Technology Education Coalition (AMSTEC) is a non-profit 501c(3) organization operating in the state of Alabama to provide leadership in improving mathematics, science, and technology

Evaluating the utility of hydrocarbons for Re-Os geochronology : establishing the timing of processes in petroleum ore systems

Energy Technology Data Exchange (ETDEWEB)

Selby, D.; Creaser, R.A. [Alberta Univ., Edmonton, AB (Canada). Dept. of Earth and Atmospheric Sciences

2005-07-01

Oil from 6 Alberta oil sands deposits were analyzed with a rhenium-osmium (Re-Os) isotope chronometer, an emerging tool for determining valuable age information on the timing of petroleum generation and migration. The tool uses molybdenite and other sulphide minerals to establish the timing and duration of mineralization. However, establishing the timing events of petroleum systems can be problematic because viable sulphides for the Re-Os chronometer are often not available. Therefore, the known presence of Re and Os associated with organic matter in black shale, a common source of hydrocarbons, may suggest that bitumen and petroleum common to petroleum systems may be utilised for Re-Os geochronology. This study evaluated the potential of the Re-Os isotopic system for geochronology and as an isotopic tracer for hydrocarbon systems. The evaluation was based on Re-Os isotopic analyses of bitumen and oil sands. Hydrocarbons formed from migrated oil in both Alberta oil sand deposits and a Paleozoic Mississippi Valley-type lead-zinc deposit contain significant Re and Os contents with high {sup 187}Re/{sup 188}Os and radiogenic {sup 187}Os/{sup 188}Os ratios suitable for geochronology. The oil from the 6 Alberta oil sand deposits yields Re-Os analyses with very high Re/{sup 188}Os ratios, and radiogenic Os isotopic compositions. Regression of the Re-Os data yields a date of 116 {+-} 27 Ma. This date plausibly represents the period of in situ radiogenic growth of {sup 187}Os following hydrocarbon migration and reservoir filling. Therefore, directly dating these processes, and this formation age corresponds with recent burial history models for parts of the Western Canada Sedimentary Basin. The very high initial {sup 187}Os/{sup 188}Os for this regression requires rocks much older than Cretaceous for the hydrocarbon source.

Application of Geographic Information System (GIS to Model the Hydrocarbon Migration: Case Study from North-East Malay Basin, Malaysia

Directory of Open Access Journals (Sweden)

Rudini

2018-01-01

Full Text Available The purpose of this study is to model the migration of hydrocarbon using Geographic Information System (GIS. Understanding hydrocarbon migration is important since it can mean the difference between success and failure in oil and gas exploration project. The hydrocarbon migration modeling using geophysical method is still not accurate due to the limitations of available data. In recent years, GIS has emerged as a powerful tool for subsurface mapping and analysis. Recent studies have been carried out about the abilities of GIS to model hydrocarbon migration. Recent advances in GIS support the establishment and monitoring of prediction hydrocarbon migration. The concept, model, and calculation are based on the current geological situation. The spatial data of hydrocarbon reservoirs is determined by its geometry of lithology and geophysical attributes. Top of Group E horizon of north-east Malay basin was selected as the study area due to the occurrence of hydrocarbon migration. Spatial data and attributes data such as seismic data, wells log data and lithology were acquired and processed. Digital Elevation Model (DEM was constructed from the selected horizon as a result of seismic interpretation using the Petrel software. Furthermore, DEM was processed in ArcGIS as a base map to shown hydrocarbon migration in north-east Malay Basin. Finally, all the data layers were overlaid to produce a map of hydrocarbon migration. A good data was imported to verify the model is correct.

Application of Geographic Information System (GIS) to Model the Hydrocarbon Migration: Case Study from North-East Malay Basin, Malaysia

Science.gov (United States)

Rudini; Nasir Matori, Abd; Talib, Jasmi Ab; Balogun, Abdul-Lateef

2018-03-01

The purpose of this study is to model the migration of hydrocarbon using Geographic Information System (GIS). Understanding hydrocarbon migration is important since it can mean the difference between success and failure in oil and gas exploration project. The hydrocarbon migration modeling using geophysical method is still not accurate due to the limitations of available data. In recent years, GIS has emerged as a powerful tool for subsurface mapping and analysis. Recent studies have been carried out about the abilities of GIS to model hydrocarbon migration. Recent advances in GIS support the establishment and monitoring of prediction hydrocarbon migration. The concept, model, and calculation are based on the current geological situation. The spatial data of hydrocarbon reservoirs is determined by its geometry of lithology and geophysical attributes. Top of Group E horizon of north-east Malay basin was selected as the study area due to the occurrence of hydrocarbon migration. Spatial data and attributes data such as seismic data, wells log data and lithology were acquired and processed. Digital Elevation Model (DEM) was constructed from the selected horizon as a result of seismic interpretation using the Petrel software. Furthermore, DEM was processed in ArcGIS as a base map to shown hydrocarbon migration in north-east Malay Basin. Finally, all the data layers were overlaid to produce a map of hydrocarbon migration. A good data was imported to verify the model is correct.

[Reform of the Law DIN EN ISO 9001:2000. Commentary on the new requirements on quality management systems].

Science.gov (United States)

Eckert, H; Böhmer, K

2000-09-01

Since January this year the German translation of the third draft to the reform of the DIN EN ISO 9000 is available. The draft reveals an approximation to the models of Business Excellence. Most important changes are a far stronger customer orientation, orientation on the processes and resource management. The norms DIN EN ISO 9002 and 9003 have been removed, ISO 8402 has been integrated in the reformed DIN EN ISO 9000. Apart from that the compatibility with other management systems has been improved. It was the aim of the reform to improve the applicability for all types of business, products and services.

On the Deposition Equilibrium of Carbon Nanotubes or Graphite in the Reforming Processes of Lower Hydrocarbon Fuels

Directory of Open Access Journals (Sweden)

Zdzisław Jaworski

2017-11-01

Full Text Available The modeling of carbon deposition from C-H-O reformates has usually employed thermodynamic data for graphite, but has rarely employed such data for impure filamentous carbon. Therefore, electrochemical data for the literature on the chemical potential of two types of purified carbon nanotubes (CNTs are included in the study. Parameter values determining the thermodynamic equilibrium of the deposition of either graphite or CNTs are computed for dry and wet reformates from natural gas and liquefied petroleum gas. The calculation results are presented as the atomic oxygen-to-carbon ratio (O/C against temperature (200 to 100 °C for various pressures (1 to 30 bar. Areas of O/C for either carbon deposition or deposition-free are computed, and indicate the critical O/C values below which the deposition can occur. Only three types of deposited carbon were found in the studied equilibrium conditions: Graphite, multi-walled CNTs, and single-walled CNTs in bundles. The temperature regions of the appearance of the thermodynamically stable forms of solid carbon are numerically determined as being independent of pressure and the analyzed reactants. The modeling indicates a significant increase in the critical O/C for the deposition of CNTs against that for graphite. The highest rise in the critical O/C, of up to 290% at 30 bar, was found for the wet reforming process.

Systems including catalysts in porous zeolite materials within a reactor for use in synthesizing hydrocarbons

Science.gov (United States)

Rolllins, Harry W [Idaho Falls, ID; Petkovic, Lucia M [Idaho Falls, ID; Ginosar, Daniel M [Idaho Falls, ID

2012-07-24

Catalytic structures include a catalytic material disposed within a zeolite material. The catalytic material may be capable of catalyzing a formation of methanol from carbon monoxide and/or carbon dioxide, and the zeolite material may be capable of catalyzing a formation of hydrocarbon molecules from methanol. The catalytic material may include copper and zinc oxide. The zeolite material may include a first plurality of pores substantially defined by a crystal structure of the zeolite material and a second plurality of pores dispersed throughout the zeolite material. Systems for synthesizing hydrocarbon molecules also include catalytic structures. Methods for synthesizing hydrocarbon molecules include contacting hydrogen and at least one of carbon monoxide and carbon dioxide with such catalytic structures. Catalytic structures are fabricated by forming a zeolite material at least partially around a template structure, removing the template structure, and introducing a catalytic material into the zeolite material.

Progress and outcomes of health systems reform in the United Arab Emirates: A systematic review

NARCIS (Netherlands)

E.J. Koornneef (Erik J.); P.B.M. Robben (Paul); Blair, I. (Iain)

2017-01-01

textabstractBackground: The United Arab Emirates (UAE) government aspires to build a world class health system to improve the quality of healthcare and the health outcomes for its population. To achieve this it has implemented extensive health system reforms in the past 10 years. The nature, extent

Hydrocarbon removal with constructed wetlands

OpenAIRE

Eke, Paul Emeka

2008-01-01

Wetlands have long played a significant role as natural purification systems, and have been effectively used to treat domestic, agricultural and industrial wastewater. However, very little is known about the biochemical processes involved, and the use of constructed treatment wetlands in the removal of petroleum aromatic hydrocarbons from produced and/or processed water. Wastewaters from the oil industry contain aromatic hydrocarbons such as benzene, toluene, ethylbenzene and x...

Some aspects of the reform of the health care systems in Austria, Germany and Switzerland.

Science.gov (United States)

Theurl, E

1999-01-01

The health care systems in Austria, Germany and Switzerland owe their institutional structure to different historical developments. While Austria and Germany voted for the Bismarck-Model of social health insurance, Switzerland adopted a voluntary system of health insurance. In all three countries, until very recently, the different challenges which the health care sector faced were met by piecemeal approaches and by stop and go policies, which, in the long run were not very successful either in containing costs or in improving efficacy and efficiency. During the 1990 more fundamental reforms in the health care systems of all three countries took place. Germany and Switzerland chose the path of deregulation of the health insurance system, which consequently strengthened the competition between the insurance companies, and, to some extent between the suppliers of medical services. While this can be seen as an essential part of the reform process for these two countries. Austria favors a state-oriented and interventionist approach in order to meet the challenges.

The impact of resource tax reform on China's coal industry

International Nuclear Information System (INIS)

Liu, Huihui; Chen, ZhanMing; Wang, Jianliang; Fan, Jihong

2017-01-01

Contributing to approximately two-thirds of primary energy consumption, coal usage is the focus of China's energy policies. To regulate the resource taxation system and reduce the burden of coal enterprises, the Chinese government launched a reform of its resource tax system in 2014 for coal, introducing the ad valorem system to replace the volume-based system that had been in place for the preceding thirty years. To assess the impact of the tax reform, this paper constructs two-stage dynamic game models by taking the coal and coal-fired power industries as the players. The market situations of shortage and oversupply are investigated separately. Empirical data are collected to estimate the model parameters for numerical simulations. The model results suggest that the tax reform will reduce both coal prices and the coal industry profitability if the tax levied on each ton of coal is maintained at the same level as before the reform, regardless of whether the market is in a shortage or an oversupply situation. However, the increased buyer's power will amplify the effect of the tax reform. The numerical simulations also provide an estimation of the tax rate of the ad valorem system that maintains the profit of the coal industry. Considering the demand and supply situations in China's coal market, policy recommendations are provided to guide further reform of China's resource tax system. - Highlights: • The paper examines the influence of resource tax reform on China's coal industry. • We construct two-stage game models between coal and coal-fired power industries. • Market situations of shortage and oversupply are studied in two taxation systems. • Coal price will decrease if maintaining the tax levied on each ton of coal the same. • To achieve the reform objective, the ad valorem tax rate should not be set too high.

Finding Common Ground in Pension Reform: Lessons from the Washington State Pension System

Science.gov (United States)

Goldhaber, Dan; Grout, Cyrus

2014-01-01

As states and localities across the nation consider the tradeoffs between defined benefit (DB) and defined contribution (DC) pension systems, it is important to gain insight into what implications pension reforms might have on workforce composition and teachers' retirement savings behavior. Moreover, it is also important to consider that…

Control and Experimental Characterization of a Methanol Reformer for a 350 W High Temperature Polymer Electrolyte Membrane Fuel Cell system

DEFF Research Database (Denmark)

Andreasen, Søren Juhl; Kær, Søren Knudsen; Jensen, Hans-Christian Becker

, i.e. cathode and anode gas flows and temperature by using mass flow controllers and controlled heaters. Using this system the methanol reformer is characterized in its different operating points, both steady-state but also dynamically. Methanol steam reforming is a well known process, and provides...... and burner and the behaviour of the CO concentration of the reformate gas....... the high temperature waste gas from a cathode air cooled 45 cell HTPEM fuel cell stack. The MEAs used are BASF P2100 which use phosphoric acid doped polybenzimidazole type membranes; an MEA with high CO tolerance and no complex humidity requirements. The methanol reformer used is integrated into a compact...

40 CFR Table 17 to Subpart Uuu of... - Continuous Monitoring Systems for Organic HAP Emissions From Catalytic Reforming Units

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Continuous Monitoring Systems for Organic HAP Emissions From Catalytic Reforming Units 17 Table 17 to Subpart UUU of Part 63 Protection of... Organic HAP Emissions From Catalytic Reforming Units As stated in § 63.1566(b)(1), you shall meet each...

Development of a System for the Analysis of Hydrocarbons Different to the Methane in Air

International Nuclear Information System (INIS)

Rodriguez Harrison, F. A.

2001-01-01

In the air there are more than 3000 organic compounds produced by the natural emissions and anthropoid-genetics. Many of these organic compounds are saturated and unsaturated hydrocarbons; the volcanoes and the plants emit some, while others are emitted for the industrial processes and for the mobile sources. The hydrocarbons play a very important role in the Atmospheric Chemistry, since they take place through their oxidation a series of substances that affect the living beings, they sensitize the human being, producing him illnesses and they contribute to alter the climate of the planet. A sampling method by adsorption about cartridges that contained Tenax, Carbopack B, and molecular sieve, and a system for the analysis of hydrocarbons in the air for thermal desertion and cryogenic concentration was developed with the purpose of identifying and quantifying the hydrocarbons different to the methane present in the winds that travel San Jose Central Valley, Costa Rica. The effect of the ozone in these determinations was studied by taking samples with destroyer of ozone made with iodize of potassium and comparing them with samples taken without the destroyer. The samples were taken simultaneously between April 20 and 29 1999 in 3 sampling stations located in the northwest side of the Volcano Irazu, in Escazu and in Turrucares. There were eleven hydrocarbons being among the most abundant anthropoid-genetics the isooctane (among 34 y 149 μg/m 3 ) and etilbenceno while (among 13 y 231 μg/m 3 ), while the one α-pineno (among 25 y 153 μg/m 3 ), β-pineno (among 60 y 192 μg/m 3 ) y el limoneno (among 34 y 244 μg/m 3 ). It was also found that the ozone didn't affect the concentrations of the unsaturated hydrocarbons in the cartridges, since there were not significant differences in the concentrations of the measured hydrocarbons when the destroyer of ozone was used. (Author) [es

American Heart Association's Call to Action for Payment and Delivery System Reform.

Science.gov (United States)

Bufalino, Vincent J; Berkowitz, Scott A; Gardner, Timothy J; Piña, Ileana L; Konig, Madeleine

2017-08-15

The healthcare system is undergoing a transition from paying for volume to paying for value. Clinicians, as well as public and private payers, are beginning to implement alternative delivery and payment models, such as the patient-centered medical home, accountable care organizations, and bundled payment arrangements. Implementation of these new models will necessitate delivery system transformation and will actively involve all fields of medical care, in particular medicine and surgery. This call to action, on behalf of the American Heart Association's Expert Panel on Payment and Delivery System Reform, serves to offer support and direction for further involvement by the American Heart Association. In doing so, it (1) provides baseline review and definition of the present models and some of the early results of these delivery models, including outcomes; (2) initiates a conversation within the American Heart Association on the impact of payment and delivery system reform, as well as how the American Heart Association should engage in the interest of patients; (3) issues a call to action to our organization and to cardiovascular and stroke health professionals across the country to become educated about these models so to as to understand their impact on patient care; and (4) asks the government and other funding agencies, including the American Heart Association, to begin supporting and prioritizing meaningful research endeavors to further evaluate these models. © 2017 American Heart Association, Inc.

China’s Entrance to the WTO and Financial Reform

Directory of Open Access Journals (Sweden)

Ki-Soon Park

2000-09-01

Full Text Available The openness and liberalization of China’s financial market is expected to accelerate with her entrance to the WTO. China plans to carry out liberalization measures, including the expansion of the Renminbi business scope. Openness and liberalization will expedite the integration of internal and external sectors, thereby making the domestic financial market more vulnerable to environmental changes. Consequently, China should establish a strong financial system to efficiently cope with the contagion effects of an external financial crisis. However, China’s financial system is still very weak, mainly due to the enormous bad loans to SOEs (state-owned enterprises. Accordingly, the Chinese government should carry out financial reform measures such as strengthening the financial supervision system, dealing with bad bank loans and restructuring the financial institutions. On the whole, China’s entrance to the WTO is expected to have a positive influence on her financial sector by accelerating such reform policies as financial reform and SOE reform. Entrance to the WTO will make society recognize the necessity of reform and openness. The Chinese government can decide to push some difficult reform policies which would not have been considered without WTO entrance.

The British parliament: An effort towards the constitutional reform

Directory of Open Access Journals (Sweden)

Pejić Irena

2015-01-01

Full Text Available The British Parliament is the eldest representative assembly which inspired the development of most European parliamentary systems. This institution provides a framework for the Westminster model of democracy. The Parliament structure is based on bicameralism, including two chambers: the House of Commons and the House of Lords. The two-chamber structure is an integral part of the British parliamentary system. During the last century, many reforms took place regarding the modernization of Parliament. Thus, the number of members of the House of Lord has been reduced in order to ensure more efficiency in the working procedures. However, the House of Commons is still 'the dominant House' given its capacity to recruit a political majority which is eligible to control the Cabinet. During the 20th century, several waves of reforms engulfed the traditional English parliamentarism and its 'unwritten' constitution. Although the reforms have yielded some results, they have not yet produced a constitution in the formal sense. The partially reformed Parliament has not lost the traditional supremacy it was initially vested under the original postulates of the parliamentary sovereignty doctrine. The great constitutional reform in the UK, initiated in 1997, has encompassed not only Parliament but also a vast array of other areas ranging from the state power organization to human rights. In this process, the British Parliament should exercise a dual function: as a subject of reform ('reformer', as well as an object of reform ('the reformed'. Undoubtedly, the United Kingdom has been facing one of the largest waves of constitutional reforms in its long history, which will sooner or later lead to a constitutional codification in the state whose system is still predominantly based on the historical and 'unwritten' constitution.

Bacterial diversity in the active stage of a bioremediation system for mineral oil hydrocarbon-contaminated soils.

Science.gov (United States)

Popp, Nicole; Schlömann, Michael; Mau, Margit

2006-11-01

Soils contaminated with mineral oil hydrocarbons are often cleaned in off-site bioremediation systems. In order to find out which bacteria are active during the degradation phase in such systems, the diversity of the active microflora in a degrading soil remediation system was investigated by small-subunit (SSU) rRNA analysis. Two sequential RNA extracts from one soil sample were generated by a procedure incorporating bead beating. Both extracts were analysed separately by generating individual SSU rDNA clone libraries from cDNA of the two extracts. The sequencing results showed moderate diversity. The two clone libraries were dominated by Gammaproteobacteria, especially Pseudomonas spp. Alphaproteobacteria and Betaproteobacteria were two other large groups in the clone libraries. Actinobacteria, Firmicutes, Bacteroidetes and Epsilonproteobacteria were detected in lower numbers. The obtained sequences were predominantly related to genera for which cultivated representatives have been described, but were often clustered together in the phylogenetic tree, and the sequences that were most similar were originally obtained from soils and not from pure cultures. Most of the dominant genera in the clone libraries, e.g. Pseudomonas, Acinetobacter, Sphingomonas, Acidovorax and Thiobacillus, had already been detected in (mineral oil hydrocarbon) contaminated environmental samples. The occurrence of the genera Zymomonas and Rhodoferax was novel in mineral oil hydrocarbon-contaminated soil.

Grounds of necessity to carry out reforms in health care system in Ukraine: historical aspect

Directory of Open Access Journals (Sweden)

I. P. Krynychna

2015-03-01

Full Text Available The article studies the historical experience of reforming the health care system in Ukraine, which allow clearing up the basic problems of public administration. Thus, the health care legislation is characterized as a fragmentary and complex thing with common overlaps and vaguely defined areas of accountability of financial and material resources and a significant deficit of funding. In turn, there is an urgent need for a fundamental change in strategy of the state policy concerning the restructuring of the health care system, which would involve fundamentally new mechanisms of public administration that must be adapted to the specific social problems and opportunities, particularly in conditions of limited resources. It is determined that reforming the health care systems of the former Soviet Union countries has similar nature with Ukraine, namely: the lack of government funding, poor quality of medical care, high level of medical services payment by citizens, the low level of wages of health care employees, and, as a consequence, the limited availability of the population to qualitative health services. On the basis of the results of the analysis of existing and not solved problems of the health care system it is proved the necessity to introduce new mechanisms of control in this field: the development of a system of compulsory medical insurance; the combination of budget and insurance sources of financing the health care system; the growing funding for the health care system; the development of initial care; adjustment of the state guarantees, according to the state financial opportunities; increasing the wages of health care employees; search for new organizational forms of health care institutions; increase the efficiency of health care resources; privatization and improvement of the structure of the medical care system . Keywords: public administration, health care reform, health insurance, initial care, medical care, medical services

Social Security Reform

National Research Council Canada - National Science Library

Nuschler, Dawn

2005-01-01

.... In recent years, reform ideas have ranged from relatively minor changes to the current pay-as-you-go social insurance system to a redesigned program based on personal savings and investments modeled after IRAs and 401(k...

Analysis of curricular reform practices at Chinese medical schools.

Science.gov (United States)

Huang, Lei; Cai, Qiaoling; Cheng, Liming; Kosik, Russell; Mandell, Greg; Wang, Shuu-Jiun; Xu, Guo-Tong; Fan, Angela P

2014-01-01

A comprehensive search of the literature published between 2001 and 2010 was performed to gain a greater understanding of curricular reform practices at Chinese medical schools. There were 10,948 studies published between 2001 and 2010 that were retrieved from the database. Following preliminary screening, 76 publications from 49 different medical schools were selected. Thirty-one publications regarding clinical medicine curricular reforms were analyzed further. Of the 76 studies, 53 described curricular reforms that were instituted in theoretical courses, 22 described curricular reforms that were instituted in experimental courses, and 1 described curricular reforms that were instituted in a clinical skills training course. Of the 31 clinical medicine publications, 2 described reforms that were implemented for 3-year program medical students, 12 described reforms that were implemented for 5-year program medical students, 6 described reforms that were implemented for 7-year program medical students, and 2 described reforms that were implemented for 8-year program medical students. Currently, the majority of medical schools in China use the discipline-based curriculum model. Thirteen studies described transition to an organ-system-based curriculum model, 1 study described transition to a problem-based curriculum model, and 3 studies described transition to a clinical presentation-based curriculum model. In 7 studies educators decided to retain the discipline-based curriculum model while integrating 1 or several new courses to remedy the weaker aspects of the traditional curriculum, in 7 studies educators decided to integrate the preclinical courses with the clinical courses by using the systemic-integrating curricular system that dilutes classical disciplines and integrates material based on organ systems, and in 2 studies educators limited reforms to clinical courses only. Eight studies discussed the implementation of a formative evaluation system, 4 studies

Dostoevsky v. The Judicial Reforms of 1864: How and Why One of Nineteenth-Century Russia’s Greatest Writers Criticized the Nation’s Most Successful Reform

Directory of Open Access Journals (Sweden)

Brian Conlon

2014-01-01

Full Text Available The legal reforms of 1864 marked a shift in Russian legal culture from an amorphous, corrupt, pre-modern system of procedure, structure, and customary law to an independent, modern, and westernized system as liberal as that of any nation. These reforms were nearly universally lauded by legal and cultural critics, both at the time they were introduced and in historical accounts. Despite the apparent necessity and success of the new courts, one of the leading figures in nineteenth-century Russian literature (and indeed the history of world literature, Fyodor Mikhailovich Dostoevsky, continually criticized the new system in both his fiction and non-fiction.Through the synthesis of historical, legal, and literary analysis, this study will examine why Dostoevsky had an adverse reaction to the reforms, the literary techniques he used, and whether Dostoevsky presented a viable alternative to the reformed courts. In order to fully comprehend Dostoevsky’s reaction to the reforms, this study will contrast the pre and post-reform judicial systems in Imperial Russia. This study will explore the scope and evolution of Dostoevsky’s criticism of the law through analysis of his pre-reform fiction, including ‘House of the Dead’ and ‘Crime and Punishment,’ his post-reform fiction, including ‘The Idiot,’ ‘Demons,’ and ‘Brothers Karamazov,’ and portions of his experimental literary periodical, ‘A Writer’s Diary.’

Bureaucratic Reform in Irrigation: A Review of Four Case Studies

Directory of Open Access Journals (Sweden)

Diana Suhardiman

2014-10-01

Full Text Available Poor performance of government-managed irrigation systems persists globally. This paper argues that addressing performance requires not simply more investment or different policy approaches, but reform of the bureaucracies responsible for irrigation management. Based on reform experiences in The Philippines, Mexico, Indonesia, and Uzbekistan, we argue that irrigation (policy reform cannot be treated in isolation from the overall functioning of government bureaucracies and the wider political structure of the states. Understanding of how and why government bureaucracies shape reform processes and outcomes is crucial to increase the actual significance of reforms. To demonstrate this, the paper links reform processes in the irrigation sector with the wider discourse of bureaucratic reform in the political science, public administration, and organisational science literature. Doing so brings to light the need for systematic comparative research on the organisational characteristic of the irrigation bureaucracies, their bureaucratic identities, and how these are shaped by various segments within the bureaucracies to provide the insights needed to improve irrigation systems performance.

Improving Finance for Qatari Education Reform. Research Brief

Science.gov (United States)

Guarino, Cassandra M.; Galama, Titus; Constant, Louay; Gonzalez, Gabriella; Tanner, Jeffery C.; Goldman, Charles A.

2009-01-01

Qatar's education reform, which included implementation of a new finance system, appears to be providing schools with adequate funding but is still struggling with issues of transparency and swift policy shifts that have been difficult to accommodate. [For full report, "Developing a School Finance System for K-12 Reform in Qatar", see…

Some considerations on the reform of the international monetary and financial system

OpenAIRE

E. GRILLI

1999-01-01

The paper discusses different views on the reform of the International Monetary System. It illustrates the most recent antecedents of the current debate, focusing on criteria, determinants and effects of the choice among different exchange regimes and discussing in particular the relationship between fixed exchange rates and financial crises, and the relationship between exchange rates and worldwide freedom of capital movements.

Performance of an auto refrigerant cascade refrigerator operating in gas refrigerant supply (GRS) mode with nitrogen-hydrocarbon and argon-hydrocarbon refrigerants

Science.gov (United States)

Gurudath Nayak, H.; Venkatarathnam, G.

2009-07-01

There is a worldwide interest in the development of auto refrigerant cascade (ARC) refrigerators operating with refrigerant mixtures. Both flammable and non-flammable refrigerant mixtures can be used in these systems. The performance of an ARC system with optimum nitrogen-hydrocarbon and argon-hydrocarbon mixtures between 90 and 160 K is presented in this paper.

Short Review: Cu Catalyst for Autothermal Reforming Methanol for Hydrogen Production

Directory of Open Access Journals (Sweden)

Ho-Shing Wu

2012-06-01

Full Text Available Hydrogen is a promising alternative energy sources, hydrogen can be used in fuel cell applications to pro-ducing electrical energy and water as byproduct. Therefore, fuel cell is a simple application and environ-mentally friendly oriented technology. Recent years various methods have been conducted to produce hy-drogen. Those methods are derived from various sources such as methanol, ethanol, gasoline, hydrocarbons. This article presents a brief review a parameter process of that affects in autothermal reforming methanol use Cu-based catalysts for production of hydrogen. Copyright © 2012 BCREC UNDIP. All rights reserved.Received: 3rd January 2012; Revised: 23rd February 2012; Accepted: 28th February 2012[How to Cite: H.S. Wu, and D. Lesmana. (2012. Short Review: Cu Catalyst for Autothermal Reforming Methanol for Hydrogen Production. Bulletin of Chemical Reaction Engineering & Catalysis, 7 (1: 27-42. doi:10.9767/bcrec.7.1.1284.27-42][How to Link / DOI: http://dx.doi.org/10.9767/bcrec.7.1.1284.27-42 ] | View in 

Exploring status and determinants of prenatal and postnatal visits in western China: in the background of the new health system reform.

Science.gov (United States)

Fan, Xiaojing; Zhou, Zhongliang; Dang, Shaonong; Xu, Yongjian; Gao, Jianmin; Zhou, Zhiying; Su, Min; Wang, Dan; Chen, Gang

2017-07-20

Prenatal and postnatal visits are two effective interventions for protection and promotion of maternal health by reducing maternal mortality and improving the quality of birth. There is limited nationally representative data regarding the changes of prenatal and postnatal visits since the latest health system reform initiated in 2009 in Shaanxi, China. The aim of this study was to explore the current status and determinants of prenatal and postnatal visits in the background of new health system reform. Data were drawn from two waves of National Health Service Surveys in Shaanxi Province which were conducted prior and post the health system reform in 2008 and 2013, respectively. A concentration index was employed to measure the degree of income-related inequality of maternal health services utilization. Multilevel mix-effects logistic regressions were applied to study the factors associated with prenatal and postnatal visits. The study sample consists of 2398 women aged 15-49 years old. The data of the 5th National Health Services Survey in 2013 showed in the criterion of the World Health Organization (WHO), the percentage of women receiving ≥4 prenatal visits was 84.79% for urban women and 82.20% for rural women, with women receiving ≥3 postnatal visits were 26.48 and 25.29% for urban and rural women respectively. In the criterion of China's ≥ 5 prenatal visits the percentages were 72.25% for urban women and 70.33% for rural women; 61.69% of urban women and 71.50% of rural women received ≥1 postnatal visits. As for urban women, the concentration index of postnatal visit utilization was -0.075 (95% CI:-0.148, -0.020) after the health system reform. The determinants related to prenatal and postnatal visits were the change of reform, women's education, parity and the delivery institution. This study showed the utilization of prenatal and postnatal visits met the requirement of the WHO, higher than other areas in China and other developing countries after

Exploring status and determinants of prenatal and postnatal visits in western China: in the background of the new health system reform

Directory of Open Access Journals (Sweden)

Xiaojing Fan

2017-07-01

Full Text Available Abstract Background Prenatal and postnatal visits are two effective interventions for protection and promotion of maternal health by reducing maternal mortality and improving the quality of birth. There is limited nationally representative data regarding the changes of prenatal and postnatal visits since the latest health system reform initiated in 2009 in Shaanxi, China. The aim of this study was to explore the current status and determinants of prenatal and postnatal visits in the background of new health system reform. Methods Data were drawn from two waves of National Health Service Surveys in Shaanxi Province which were conducted prior and post the health system reform in 2008 and 2013, respectively. A concentration index was employed to measure the degree of income-related inequality of maternal health services utilization. Multilevel mix-effects logistic regressions were applied to study the factors associated with prenatal and postnatal visits. Results The study sample consists of 2398 women aged 15-49 years old. The data of the 5th National Health Services Survey in 2013 showed in the criterion of the World Health Organization (WHO, the percentage of women receiving ≥4 prenatal visits was 84.79% for urban women and 82.20% for rural women, with women receiving ≥3 postnatal visits were 26.48 and 25.29% for urban and rural women respectively. In the criterion of China’s ≥ 5 prenatal visits the percentages were 72.25% for urban women and 70.33% for rural women; 61.69% of urban women and 71.50% of rural women received ≥1 postnatal visits. As for urban women, the concentration index of postnatal visit utilization was −0.075 (95% CI:-0.148, −0.020 after the health system reform. The determinants related to prenatal and postnatal visits were the change of reform, women’s education, parity and the delivery institution. Conclusions This study showed the utilization of prenatal and postnatal visits met the requirement of the WHO

Vapor Delivery Systems for the Study of the Effects of Reformate Gas Impurities in HT-PEM Fuel Cells

DEFF Research Database (Denmark)

Araya, Samuel Simon; Kær, Søren Knudsen; Andreasen, Søren Juhl

2011-01-01

, impurities in the reformate gas produced from methanol steam reforming can affect the performance and durability of fuel cells. In this paper different vapor delivery systems, intended to assist in the study of the effects of some of the impurities, are described and compared with each other. A system based...... on a pump and electrically heated evaporator was found to be more suitable for the typical flow rates involved in the anode feed of an H3PO4/PBI based HT-PEMFC unit cell assembly. Test stations composed of vapor delivery systems and mass flow controllers for testing the effects of methanol slip, water vapor...

Performance and economic assessments of a solid oxide fuel cell system with a two-step ethanol-steam-reforming process using CaO sorbent

Science.gov (United States)

Tippawan, Phanicha; Arpornwichanop, Amornchai

2016-02-01

The hydrogen production process is known to be important to a fuel cell system. In this study, a carbon-free hydrogen production process is proposed by using a two-step ethanol-steam-reforming procedure, which consists of ethanol dehydrogenation and steam reforming, as a fuel processor in the solid oxide fuel cell (SOFC) system. An addition of CaO in the reformer for CO2 capture is also considered to enhance the hydrogen production. The performance of the SOFC system is analyzed under thermally self-sufficient conditions in terms of the technical and economic aspects. The simulation results show that the two-step reforming process can be run in the operating window without carbon formation. The addition of CaO in the steam reformer, which runs at a steam-to-ethanol ratio of 5, temperature of 900 K and atmospheric pressure, minimizes the presence of CO2; 93% CO2 is removed from the steam-reforming environment. This factor causes an increase in the SOFC power density of 6.62%. Although the economic analysis shows that the proposed fuel processor provides a higher capital cost, it offers a reducing active area of the SOFC stack and the most favorable process economics in term of net cost saving.

Method of preparing a catalyst suitable for steam reformation of hydrocarbons and for methane production. [German patent

Energy Technology Data Exchange (ETDEWEB)

Golebiowski, A; Romotowski, T; Hennel, W; Wroblewska-Wroblewska, T; Polanski, A; Janecki, Z; Paluch-Paluch, S

1977-05-26

A method of producing a nickel catalyst suitable for steam reformation and methane production is described which forms a permanent bond with the inner surface of an externally heated metal tube, e.g. a heat exchanger tube. To begin with, a metal sponge with good adhesion to the metal tube is produced on the basis of a metallic powder of the metal group which is treated by a conventional calcination process. The metal sponge is then covered with a metal oxide which is not reduced under reformation conditions, e.g. aluminium oxide, by wetting the metal sponge with aluminium nitrate and repeated calcination. Wetting and calcination are repeated twice, and the calcination temperature is lower each time in the range between 400 and 1200/sup 0/C. The activated nickel is there deposited by wetting with a nickel salt solution and subsequent calcination.

Implementing Lean Health Reforms in Saskatchewan

Directory of Open Access Journals (Sweden)

Greg Marchildon

2013-07-01

Full Text Available Saskatchewan has gone further than any other Canadian province in implementing health system process improvements using Lean, a production line discipline that originated with the automobile industry. The goal of the Lean reform is to reduce waste and improve quality and overall health system performance by long-term changes in behaviour. Lean enjoys a privileged position on the provincial government’s agenda because of the policy’s championing by the Deputy Minister of Health and the policy’s fit with the government’s patient-centred care agenda. The implementation of reform depends on a major investment of time in the training and Lean-certification of key leaders and managers in the provincial health system. The Saskatchewan Union of Nurses, the union representing the single largest group of health workers in the province, has agreed to co-operate with the provincial government in implementing Lean-type reforms. Thus far, the government has had limited independent evaluation of Lean while internal evaluations claim some successes.

Reforming technology for syngas production

International Nuclear Information System (INIS)

Epstein, M.

1997-01-01

Methane forming reactions using either steam or CO 2 have been known to industry for a long time. These endothermic reactions require the investment of a relatively large amount of energy. German researchers, in the 1970's, conceived and developed the idea to use this reaction and the reverse methanation reaction in a closed loop for the transportation and distribution of nuclear heat. The idea was also adopted for use with solar energy as a heat source. Utilizing solar energy as the heat source, the Weismann Institute of Science has fabricated, installed and operated a complete loop capable of the conversion and transportation of over 400 kW of heat. This system can be operated with a wide range of CO 2 /H 2 O/CH 4 feed mixtures. Steam reforming is the common reforming reaction in the ''open loop'' mode for the purpose of synthesis gas production. This is accomplished with a large excess of steam on a nickel catalyst. However, it has only recently been recognized that there is also a substantial market for CO 2 reforming. The CO 2 /CH 4 mixture in various proportions exists in many places and has, so far, not been used efficiently. The sources for this mixture are biogas produced in anaerobic digestion processes and gas resources such as the NATUNA gas field in Indonesia, and many others. Therefore, the system of CO 2 /CH 4 deserves more attention. Commercial catalysts used for steam reforming based on nickel are not suitable for this system. Therefore, other catalysts based on Rhodium and Ruthenium have been developed and some performance data is presented in this paper. Also presented is a conceptual schematic layout of a CO 2 reforming plant and matching methanator. A computer code for a detailed design of the entire loop in a commercial size system has been prepared where optimized operational conditions as well as equipment parameters can be determined. (author). 3 figs, 3 tabs

Telecom Reform

DEFF Research Database (Denmark)

Telecom Reform: Principles, Policies and Regulatory Practices, provides a comprehensive and definitive review and assessment of the unfolding telecom reform process, and its implications for information society development. It is an invaluable resource and authoritative reference on telecom reform...... and information infrastructure issues - for people in government, academia, industry and the consulting community. This book addresses the process of policy and regulatory reform in telecom that is now in its formative stage. It draws on detailed knowledge of industry development and regulatory experience......, as well as expertise in the new technologies, industries, economics, policy development, and law to present and critique the principles, policies and regulatory practices associated with telecom reform. Twenty six international experts address thirty two topics that are essential to successful telecom...

Achievements and Problems of Reform of Investment Management System for Shanghai Pilot Free Trade Zone

Institute of Scientific and Technical Information of China (English)

Chengrong; PAN

2014-01-01

The establishment of Shanghai Pilot Free Trade Zone provides many possibilities for China’s economic construction. This paper made a comparative analysis on investment management system of Shanghai Pilot Free Trade Zone and traditional investment management system,discussed achievements and problems of reform of investment management system of Shanghai Pilot Free Trade Zone,and finally came up with pertinent policy recommendations.

New systems of care for substance use disorders: treatment, finance, and technology under health care reform.

Science.gov (United States)

Pating, David R; Miller, Michael M; Goplerud, Eric; Martin, Judith; Ziedonis, Douglas M

2012-06-01

This article outlined ways in which persons with addiction are currently underserved by our current health care system. However, with the coming broad scale reforms to our health care system, the access to and availability of high-quality care for substance use disorders will increase. Addiction treatments will continue to be offered through traditional substance abuse care systems, but these will be more integrated with primary care, and less separated as treatment facilities leverage opportunities to blend services, financing mechanisms, and health information systems under federally driven incentive programs. To further these reforms, vigilance will be needed by consumers, clinicians, and policy makers to assure that the unmet treatment needs of individuals with addiction are addressed. Embedded in this article are essential recommendations to facilitate the improvement of care for substance use disorders under health care reform. Ultimately, as addiction care acquires more of the “look and feel” of mainstream medicine, it is important to be mindful of preexisting trends in health care delivery overall that are reflected in recent health reform legislation. Within the world of addiction care, clinicians must move beyond their self-imposed “stigmatization” and sequestration of specialty addiction treatment. The problem for addiction care, as it becomes more “mainstream,” is to not comfortably feel that general slogans like “Treatment Works,” as promoted by Substance Abuse and Mental Health Services Administration’s Center for Substance Abuse Treatment during its annual Recovery Month celebrations, will meet the expectations of stakeholders outside the specialty addiction treatment community. Rather, the problem is to show exactly how addiction treatment works, and to what extent it works-there have to be metrics showing changes in symptom level or functional outcome, changes in health care utilization, improvements in workplace attendance and

Syngas Conversion to Gasoline-Range Hydrocarbons over Pd/ZnO/Al2O3 and ZSM-5 Composite Catalyst System

Energy Technology Data Exchange (ETDEWEB)

Dagle, Robert A.; Lizarazo Adarme, Jair A.; Lebarbier, Vanessa MC; Gray, Michel J.; White, James F.; King, David L.; Palo, Daniel R.

2014-07-01

A composite Pd/ZnO/Al2O3-HZSM-5 (Si/Al=40) catalytic system was evaluated for the synthesis of gasoline-range hydrocarbons directly from synthesis gas. Bifunctional catalyst comprising PdZn metal and acid sites present the required catalytically active sites necessary for the methanol synthesis, methanol dehydration, and methanol-to-gasoline reactions. This system provides a unique catalytic pathway for the production of liquid hydrocarbons directly from syngas. However, selectivity control is difficult and poses many challenges. The composite catalytic system was evaluated under various process conditions. Investigated were the effects of temperature (310-375oC), pressure (300-1000 psig), time-on-stream (50 hrs), and gas-hour space velocity (740-2970 hr-1), using a H2/CO molar syngas ratio of 2.0. By operating at the lower end of the temperature range investigated, liquid hydrocarbon formation was favored, as was decreased amounts of undesirable light hydrocarbons. However, lower operating temperatures also facilitated undesirable CO2 formation via the water-gas shift reaction. Higher operating pressures slightly favored liquid synthesis. Operating at relatively low pressures (e.g. 300 psig) was made possible, whereas for methanol synthesis alone higher pressure are usually required to achieve similar conversion levels (e.g. 1000 psig). Thermodynamic constraints on methanol synthesis are eased by pushing the equilibrium through hydrocarbon formation. Catalytic performance was also evaluated by altering Pd and Zn composition of the Pd/ZnO/Al2O3 catalyst. Of the catalysts and conditions tested, selectivity toward liquid hydrocarbon was highest when using a 5% Pd metal loading and Pd/Zn molar ratio of 0.25 and mixed with HZMS-5, operating at 310oC and 300 psig, CO conversion was 43 % and selectivity (carbon weight basis) to hydrocarbons was 49 wt. %. Of the hydrocarbon fraction, 44wt. % was in the C5-C12 liquid product range and consisted primarily of aromatic

The Spanish reforms on domestic work regulation

Directory of Open Access Journals (Sweden)

Elena Desdentado Daroca

2016-06-01

Full Text Available This paper analyses the latest Spanish reforms regarding domestic work. The Spanish legislator, doubtlessly influenced by the ILO Domestic Work Convention nº 189 – which, however, was not later ratified in Spain- made a deep reform on domestic work in 2011. This legal reform implied a striking change that affected both working conditions and social security of employees in the family home. The aim of this reform has been to bring the regulation in domestic work closer to the general regulation for other workers, although maintaining certain specialties. Regarding working conditions, their setting as “particular employment relationship” has been held. However, the differences between this relationship and the common ones have been reduced. As for social security, domestic employees have been incorporated into the General Social Security System, but with important specialties, thus erasing the Special Domestic Employees System. The paper also examines the legal changes that have taken place in this field after the new Government arose.

Judicial Reforms in Russia: 1864 to 2014

Directory of Open Access Journals (Sweden)

Irina Reshetnikova

2015-01-01

Full Text Available In 2014 we celebrate the 150th anniversary of the Judicial Reform in Russia. The 1860s are known as a time of major reforms in various spheres of life, one of them being the Judicial Reform adopted in 1864. Before 1864 civil procedure was considered to be the classical form of inquisitorial justice1 with active judges and passive parties. Inquisitorial procedure was a written process conducted in secret with no legal representatives in court, and with formal evaluation of evidence (otsenka dokazatel’stv. Instead of an inquisitorial procedure the Judicial Reform introduced an adversarial system with active parties and more or less passive judges, an open, oral (public process, legal representatives, and free evaluation of evidence. So, for Russian procedure it was a revolution as it happened in other countries of Europe, which turned away from an inquisitorial to an adversarial system of justice.

The English and Swedish health care reforms.

Science.gov (United States)

Glennerster, H; Matsaganis, M

1994-01-01

England and Sweden have two of the most advanced systems of universal access to health care in the world. Both have begun major reforms based on similar principles. Universal access and finance from taxation are retained, but a measure of competition between providers of health care is introduced. The reforms therefore show a movement toward the kind of approach advocated by some in the United States. This article traces the origins and early results of the two countries' reform efforts.

Steepest Ascent Tariff Reform

DEFF Research Database (Denmark)

Raimondos-Møller, Pascalis; Woodland, Alan

2014-01-01

. In undertaking this task, and by focusing on tariff reforms, we introduce the concept of a steepest ascent policy reform, which is a locally optimal reform in the sense that it achieves the highest marginal gain in utility of any feasible local reform. We argue that this reform presents itself as a natural......The policy reform literature is primarily concerned with the construction of reforms that yield welfare gains. By contrast, this paper’s contribution is to develop a theoretical concept for which the focus is upon the sizes of welfare gains accruing from policy reforms rather than upon their signs...... benchmark for the evaluation of the welfare effectiveness of other popular tariff reforms such as the proportional tariff reduction and the concertina rules, since it provides the maximal welfare gain of all possible local reforms. We derive properties of the steepest ascent tariff reform, construct...

Mount Sinai Hospital's approach to Ontario's Health System Funding Reform.

Science.gov (United States)

Chalk, Tyler; Lau, Davina; Morgan, Matthew; Dietrich, Sandra; Beduz, Mary Agnes; Bell, Chaim M

2014-01-01

In April 2012, the Ontario government introduced Health System Funding Reform (HSFR), a transformational shift in how hospitals are funded. Mount Sinai Hospital recognized that moving from global funding to a "patient-based" model would have substantial operational and clinical implications. Adjusting to the new funding environment was set as a top corporate priority, serving as the strategic basis for re-examining and redesigning operations to further improve both quality and efficiency. Two years into HSFR, this article outlines Mount Sinai Hospital's approach and highlights key lessons learned. Copyright © 2014 Longwoods Publishing.

The Structural Reforms of the Chinese Statistical System Die Strukturreformen des chinesischen Statistiksystems

Directory of Open Access Journals (Sweden)

Günter Moser

2009-04-01

Full Text Available The quality of statistical data covering the economic and social development of the People’s Republic of China has been questioned by international and national data users for years. The reasons for this doubt lie mainly in the structure of the Chinese system of statistics. Two parallel systems exist which operate largely autonomously: the national system of statistics and the sectoral system of statistics. In the area of the national statistical system, the National Bureau of Statistics (NBS has the authority to order and collect statistics. This competence lies with the ministries and authorities below the ministerial level. This article describes and analyses these structures, the resulting problems, and the reform measures taken to date. It also aims to provide a better understanding of the statistical data about the People’s Republic of China and to enable an assessment of them within a changing structural context. In conclusion, approaches to further reforms will be provided based on the author’s long-standing experience in cooperation projects with the official Chinese statistics agencies. Die Qualität der Statistiken zur ökonomischen und sozialen Entwicklung in der Volksrepublik China ist in letzter Zeit sowohl von ausländischen wie auch von einheimischen Nutzern der Daten in Frage gestellt worden. Die Gründe dafür liegen vor allem in der Struktur des Erhebungssystems in China.

Experimental analysis of an autothermal reformer for automotive purposes

International Nuclear Information System (INIS)

Caners, C.; Peppley, B.; Harrison, S.; Oosthuizen, P.

2004-01-01

This paper describes the experimental analysis, concomitant with modeling research, to determine improved operating parameters and design of an autothermal reformer. The reformer, utilizing both partial oxidation and steam reforming reactions, along with the water gas shift phenomena is well suited for the mobile application of transportation. This is due to the novel geometry of the autothermal reformer, which seeks to improve the heat transfer characteristics of the process, whereby the exothermic partial oxidation reaction provides the heat energy required to drive the steam reforming reaction, to the point of a thermally neutral system. The paper will present data from the experimental results of reforming iso-octane as a surrogate for gasoline in the form of reformate composition, iso-octane conversion percentages and efficiencies in terms of hydrogen realized per mol of fuel input. (author)

Extended professional development for systemic curriculum reform

Science.gov (United States)

Kubitskey, Mary Elizabeth

suggests a PD design model for long-term systemic change, incorporating teacher practice and student response, providing guidance for teachers making adaptations that maintain reform. This dissertation responds to the call for empirical research linking PD to learning outcomes. These models are unique because practice becomes a continuum of PD, rather than outcome and stresses the importance of addressing teachers' beliefs. This PD design provides mechanisms for maintaining equivalence between the written and enacted curriculum, sustaining the integrity of the reform.

Lumping procedure for a kinetic model of catalytic naphtha reforming

Directory of Open Access Journals (Sweden)

H. M. Arani

2009-12-01

Full Text Available A lumping procedure is developed for obtaining kinetic and thermodynamic parameters of catalytic naphtha reforming. All kinetic and deactivation parameters are estimated from industrial data and thermodynamic parameters are calculated from derived mathematical expressions. The proposed model contains 17 lumps that include the C6 to C8+ hydrocarbon range and 15 reaction pathways. Hougen-Watson Langmuir-Hinshelwood type reaction rate expressions are used for kinetic simulation of catalytic reactions. The kinetic parameters are benchmarked with several sets of plant data and estimated by the SQP optimization method. After calculation of deactivation and kinetic parameters, plant data are compared with model predictions and only minor deviations between experimental and calculated data are generally observed.

The Changing Modes of Administrative Reform in South Korea

Directory of Open Access Journals (Sweden)

Chonghee HAN

2017-02-01

Full Text Available In this paper, we review the past two decades of administrative reform in South Korea and argue that the dominant models and theories in the fi eld, i.e., New Public Management (NPM, post-NPM, and traditional public administration have been in a state of fusion in implementing measures without a coherent reform model. We observe that the reform movements can neither challenge nor undermine the traditional bureaucracy and maintain that they are the result of a complex mix of both environmental events and contextual factors. We specifi cally examine the co ncrete change and development of administrative reform during the Kim Dae Jung (1998- 2003, Roh Moo Hyun (2003-2008, and Lee Myung Bak (2008-2013 administrations in South Korea. Among the cases being considered are the restructuring of government ministries, the executive agency system, and rationalization of public enterprises, as well as such performance management schemes as the evaluation system for government departments and the Open Position System. We conclude that the developmental state and the hierarchical bureaucracy are still salient in South Korea’s inconsistent administrative reform since the 1990s and that it is crucial to design a prudent reform strategy to achieve a more effective public sector.

Structural higher education reform - design and evaluation: synthesis report

NARCIS (Netherlands)

File, Jonathan M.; Huisman, Jeroen; de Boer, Harry F.; Seeber, Marco; Vukasovic, Martina; Westerheijden, Donald F.

2016-01-01

This study analyses how different types of system-level (or ‘landscape’) structural reforms in higher education have been designed and implemented in selected higher education systems. In the 12 case studies that form the core of the project, the researchers examine reforms aimed at: - Increasing

Consumer demand system estimation and value added tax reforms in the Czech Republic

Czech Academy of Sciences Publication Activity Database

Janský, Petr

2014-01-01

Roč. 64, č. 3 (2014), s. 246-273 ISSN 0015-1920 R&D Projects: GA TA ČR(CZ) TD010033 Institutional support: RVO:67985998 Keywords : consumer behavior * Quadratic Almost Ideal Demand System * tax reforms Subject RIV: AH - Economics Impact factor: 0.420, year: 2014 http://journal.fsv.cuni.cz/storage/1301_jansky.pdf

Re-reform of Latin American Private Pensions Systems: Argentinian and Chilean Models and Lessons

OpenAIRE

Carmelo Mesa-Lago

2009-01-01

Between 1981 and 2008, 11 countries in Latin America structurally reformed their defined-benefit, Pay-As-You-Go, public pension systems, partially or totally replacing them with defined contribution, fully funded, privately managed schemes based on individual accounts. Initial failures in design and subsequent performance of the private systems led to partial corrections, but in 2008 two countries implemented far reaching “re-reforms”: Chile maintained and improved its system, whereas Argenti...

Hydrocarbon-degrading sulfate-reducing bacteria in marine hydrocarbon seep sediments

OpenAIRE

Kleindienst, Sara

2012-01-01

Microorganisms are key players in our biosphere because of their ability to degrade various organic compounds including a wide range of hydrocarbons. At marine hydrocarbon seeps, more than 90% of sulfate reduction (SR) is potentially coupled to non-methane hydrocarbon oxidation. Several hydrocarbon-degrading sulfate-reducing bacteria (SRB) were enriched or isolated from marine sediments. However, in situ active SRB remained largely unknown. In the present thesis, the global distribution and a...

Modeling and simulation of a packed bed reactor for hydrogen by methanol steam reforming

International Nuclear Information System (INIS)

Aboudheir, A.; Idem, R.

2004-01-01

'Full text:' The performance of a catalytic packed bed tubular reactor for hydrogen production depends on mass transport characteristics and temperature distribution in the reactor. To accurately predict this performance, a rigorous numerical model has been developed based on coupled mass, energy, and momentum balance equations in cylindrical coordinates. This comprehensive model takes into account the variations of the concentration and temperature in both the axial and radial directions as well as the pressure drop along the packed reactor. Also, experimental measurements for hydrogen production were collected using a manganese-promoted co-precipitated Cu-Al catalyst for methanol-steam reforming in a micro-reactor having 10 mm i.d. and 460 mm overall length. The operating temperature ranged from 443 to 523 K and the space-time ranged from 0.1 to 2.5 kg cat h/kmol CH3OH. The simulation results were found to be in close agreement with the experimental data over the various operating conditions. This confirms the validity of both the numerical model of this work and our previous published kinetics models for this reaction system. In addition, the model formulation is applicable to handle reactions, not only for the microreactor presented in this work, but also, for other laboratory size and industrial scale processes for hydrogen production by hydrocarbon reformation. (author)

Fiscal crisis, social security reform and vulnerable population

Directory of Open Access Journals (Sweden)

Peinado Patricia

2014-01-01

Full Text Available The aging process we are witnessing in the majority of developed countries is raising financial sustainability problems in the pay-as-you-go pension system. The reforms designed to re-establish the financial equilibrium of pension systems may put one of the most important objectives of these systems at risk: to reduce the poverty rate among the elderly. This paper studies the effects that the reforms implemented in the Spanish pension system would have on the poverty rate of the retired population. The two main novelties presented are the following. First, the collective under study is focused on the most vulnerable workers. Second, the effects of the reforms are studied taking into account the labour market situation of the individuals in the years prior to retirement.

Predicting hydrocarbon release from soil

International Nuclear Information System (INIS)

Poppendieck, D.; Loehr, R.C.

2002-01-01

hydrocarbons in a contaminated soil. This knowledge can enhance the selection and determine the duration of a proper remediation strategy. Information will be provided on the correlation of the results from this protocol to the results of chemical loss in contaminated soil bioremediation systems. This research has been completed, the data is currently being analyzed and the results will be fully evaluated by early 2002. As a result, the protocol and potential applications to field decisions will be presented and discussed. (author)

From Bismarck to Beveridge: the other pension reform in Spain

Directory of Open Access Journals (Sweden)

J. Ignacio Conde-Ruiz

2016-08-01

Full Text Available Abstract Ageing is the major challenge for the PAYG pension systems in developed countries. Most of them are undergoing reforms in order to adapt to the new demographic reality. The package of reforms implemented includes increasing the retirement age, reducing the replacement rate, or introducing a sustainability factor linking pension to life expectancy. The aim of this paper is to analyse the potential consequences of a different type of reform that is at a very incipient stage in Spain but that could have a significant impact if it were fully implemented. This reform, called ‘silent reform’ because it is imperceptible to citizens in its early stages, basically consists in increasing maximum pensions in line with inflation instead of wage or productivity growth. This policy is reducing the replacement rate only for high earning workers and increasing the redistributive component of the system. This paper is the first to quantify and evaluate the potential consequences of this type of reform in Spain. We have used an accounting model with heterogeneous agents and overlapping generations in order to project pension expenditure for the next six decades. The results show that this type of reform could potentially contain future expenditure but at the cost of changing the nature of the pension system from a contributory or Bismarckian-type system into a pure redistributive pension system or Beveridgean-type one.

Development of large scale internal reforming molten carbonate fuel cell

Energy Technology Data Exchange (ETDEWEB)

Sasaki, A.; Shinoki, T.; Matsumura, M. [Mitsubishi Electric Corp., Hyogo (Japan)

1996-12-31

Internal Reforming (IR) is a prominent scheme for Molten Carbonate Fuel Cell (MCFC) power generating systems in order to get high efficiency i.e. 55-60% as based on the Higher Heating Value (HHV) and compact configuration. The Advanced Internal Reforming (AIR) technology has been developed based on two types of the IR-MCFC technology i.e. Direct Internal Reforming (DIR) and Indirect Internal Reforming (DIR).

The Heart of Economic Reform: China's Banking Reform and State Enterprise Restructuring

National Research Council Canada - National Science Library

Tong, Daochi

1999-01-01

... priority in the reform agenda. This study examines how financial resources are misallocated under the current financial system in China, and the impact of such misallocation of capital on the strength of the banking sector...

Reforms in Nigerian education sector: Implications for Science and ...

African Journals Online (AJOL)

This paper examines the state of Education in Nigeria, the current educational reforms and their implications for science and technology education. It reviews various score sheets for the state of the countries educational system pointing to indicators of the system being inefficient, and attendantly calling for a reformation.

Applying Concepts of Critical Pedagogy to Qatar's Educational Reform

Science.gov (United States)

Romanowski, Michael H.; Amatullah, Tasneem

2016-01-01

Qatar is in the midst of a systemic education reform, Education For a New Era, steered by RAND's (a nonprofit research organization) analysis and report of Qatar's Educational system. Driven by a neoliberal agenda, the reform includes international curricula, curriculum standards, teacher licensure, and professional standards for school leaders…

A PVTC system integrating photon-enhanced thermionic emission and methane reforming for efficient solar power generation

Institute of Scientific and Technical Information of China (English)

Wenjia Li; Hongsheng Wang; Yong Hao

2017-01-01

A new photovoltaic-thermochemical (PVTC) conceptual system integrating photon-enhanced thermionic emission (PETE) and methane steam reforming is proposed.Major novelty of the system lies in its potential adaptivity to primary fuels (e.g.methane) and high efficiencies of photovoltaic and thermochemical power generation,both of which result from its operation at much elevated temperatures (700-1000 ℃)compared with conventional photovoltaic-thermal (PVT) systems.Analysis shows that an overall power generation efficiency of 45.3％ and a net solar-to-electric efficiency of 39.1％ could be reached at an operating temperature of 750 ℃,after considering major losses during solar energy capture and conversion processes.The system is also featured by high solar share (37％) in the total power output,as well as high energy storage capability and very low CO2 emissions,both enabled by the integration of methane reforming with photovoltaic generation at high temperatures.

Numerical analysis of performance of steam reformer of methane reforming hydrogen production system connected with high-temperature gas-cooled reactor

International Nuclear Information System (INIS)

Yin Huaqiang; Jiang Shengyao; Zhang Youjie

2007-01-01

Methane conversion rate and hydrogen output are important performance indexes of the steam reformer. The paper presents numerical analysis of performance of the reformer connected with high-temperature gas-cooled reactor HTR-10. Setting helium inlet flow rate fixed, performance of the reformer was examined with different helium inlet temperature, pressure, different process gas temperature, pressure, flow rate, and different steam to carbon ratio. As the range concerned, helium inlet temperature has remarkable influence on the performance, and helium inlet temperature, process gas temperature and pressure have little influence on the performance, and improving process gas flow rate, methane conversion rate decreases and hydrogen output increases, however improving steam to carbon ratio has reverse influence on the performance. (authors)

Achievements and Problems of Reform of Investment Management System for Shanghai Pilot Free Trade Zone

OpenAIRE

PAN, Chengrong

2014-01-01

The establishment of Shanghai Pilot Free Trade Zone provides many possibilities for China’s economic construction. This paper made a comparative analysis on investment management system of Shanghai Pilot Free Trade Zone and traditional investment management system, discussed achievements and problems of reform of investment management system of Shanghai Pilot Free Trade Zone, and finally came up with pertinent policy recommendations.

Teacher Evaluation Reform: Focus, Feedback, and Fear

Science.gov (United States)

Donaldson, Morgaen L.

2016-01-01

How are teachers experiencing the more rigorous teacher evaluation systems that many states have mandated in recent years? Donaldson, who has studied teacher evaluation reform over the past eight years, shares insights from a study of 14 Connecticut districts that have implemented the state's 2012 teacher evaluation reforms. In surveys and…

Social Security Funds Clamor for Reform

Institute of Scientific and Technical Information of China (English)

郑秉文

2008-01-01

This paper analyzed the institutional deficiencies inherent in China’s social security system based on a dissection of various social security fund violations. It holds that the unscientific design in social security system is the root cause for social security fund violations, which is reflected in low level of social security unification, irrational investment system and legislative loopholes etc. Currently, China’s social security funds are facing risks in management and in system; The key of risk control lies in the reforming of the overall framework of social security system through the following aspects: 1) readjust the unified account system structure to raise the level of unification; 2) reform funds investment system to boost ROI; 3) speeding up legislative to regulate the administrative costs and the behaviors of its entities.

Saturated versus unsaturated hydrocarbon interactions with carbon nanostructures

Directory of Open Access Journals (Sweden)

Deivasigamani eUmadevi

2014-09-01

Full Text Available The interactions of various acyclic and cyclic hydrocarbons in both saturated and unsaturated forms with the carbon nanostructures (CNSs have been explored by using density functional theory (DFT calculations. Model systems representing armchair and zigzag carbon nanotubes (CNTs and graphene have been considered to investigate the effect of chirality and curvature of the CNSs towards these interactions. Results of this study reveal contrasting binding nature of the acyclic and cyclic hydrocarbons towards CNSs. While the saturated molecules show stronger binding affinity in acyclic hydrocarbons; the unsaturated molecules exhibit higher binding affinity in cyclic hydrocarbons. In addition, acyclic hydrocarbons exhibit stronger binding affinity towards the CNSs when compared to their corresponding cyclic counterparts. The computed results excellently corroborate the experimental observations. The interaction of hydrocarbons with graphene is more favourable when compared with CNTs. Bader’s theory of atoms in molecules has been invoked to characterize the noncovalent interactions of saturated and unsaturated hydrocarbons. Our results are expected to provide useful insights towards the development of rational strategies for designing complexes with desired noncovalent interaction involving CNSs.

Efficiency gain of solid oxide fuel cell systems by using anode offgas recycle - Results for a small scale propane driven unit

Science.gov (United States)

Dietrich, Ralph-Uwe; Oelze, Jana; Lindermeir, Andreas; Spitta, Christian; Steffen, Michael; Küster, Torben; Chen, Shaofei; Schlitzberger, Christian; Leithner, Reinhard

The transfer of high electrical efficiencies of solid oxide fuel cells (SOFC) into praxis requires appropriate system concepts. One option is the anode-offgas recycling (AOGR) approach, which is based on the integration of waste heat using the principle of a chemical heat pump. The AOGR concept allows a combined steam- and dry-reforming of hydrocarbon fuel using the fuel cell products steam and carbon dioxide. SOFC fuel gas of higher quantity and quality results. In combination with internal reuse of waste heat the system efficiency increases compared to the usual path of partial oxidation (POX). The demonstration of the AOGR concept with a 300 Wel-SOFC stack running on propane required: a combined reformer/burner-reactor operating in POX (start-up) and AOGR modus; a hotgas-injector for anode-offgas recycling to the reformer; a dynamic process model; a multi-variable process controller; full system operation for experimental proof of the efficiency gain. Experimental results proof an efficiency gain of 18 percentage points (η·POX = 23%, η·AOGR = 41%) under idealized lab conditions. Nevertheless, further improvements of injector performance, stack fuel utilization and additional reduction of reformer reformer O/C ratio and system pressure drop are required to bring this approach into self-sustaining operation.

Curriculum reform at Chinese medical schools: what have we learned?

Science.gov (United States)

Huang, Lei; Cheng, Liming; Cai, Qiaoling; Kosik, Russell Olive; Huang, Yun; Zhao, Xudong; Xu, Guo-Tong; Su, Tung-Ping; Chiu, Allen Wen-Hsiang; Fan, Angela Pei-Chen

2014-12-01

Curriculum reform at Chinese medical schools has attracted a lot of attention recently. Several leading medical schools in China have undergone exploratory reforms and in so doing, have accumulated significant experience and have made considerable progress. An analysis of the reforms conducted by 38 Chinese medical colleges that were targeted by the government for upgrade was performed. Drawing from both domestic and international literature, we designed a questionnaire to determine what types of curricular reforms have occurred at these institutions and how they were implemented. Major questions touched upon the purpose of the reforms, curricular patterns, improvements in teaching methods post-reform, changes made to evaluation systems post-reform, intra-university reform assessment, and what difficulties the schools faced when instituting the reforms. Besides the questionnaire, relevant administrators from each medical school were also interviewed to obtain more qualitative data. Out of the 38 included universities, twenty-five have undergone major curricular reforms. Among them, 60.0% adopted an organ system-based curriculum model, 32.0% adopted a problem-based curriculum model, and 8.0% adopted a hybrid curriculum model. About 60.0% of the schools' reforms involved both the "pre-clinical" and the "clinical" curricula, 32.0% of the schools' reforms were limited to the "pre-clinical" curricula, and 8.0% of the schools' reforms only involved the "clinical" curricula. Following curricular reform, 60.0% of medical schools experienced an overall reduction in teaching hours, 76.0% reported an increase in their students' clinical skills, and 60.0% reported an increase in their students' research skills. Medical curricular reform is still in its infancy in China. The republic's leading medical schools have engaged in various approaches to bring innovative teaching methods to their respective institutions. However, due to limited resources and the shackle of traditional

PRIORITIES OF PENSION REFORM IN UKRAINE AT THE PRESENT STAGE

Directory of Open Access Journals (Sweden)

Volodymyr Rudyk

2017-03-01

Full Text Available The issues of reforming the national pension system in modern conditions are considered. Their main elements, level of  their using in the general pension model of the country are analyzed. The financial security of the pension sector, increasing in pension costs, tendencies of increase of  their share relative to GDP for the future were assessed. Comparison of this indicator on the European countries was made. Priorities for pension reform were identified, main directions of reorganization of the solidarity pension system, the necessity of introduction of obligatory accumulative pension insurance were justified, the ways of further development of private pension provision were determined. Special attention was paid to the need to improve the legislative framework, which will be the legal basis for the successful conduction of this stage of the pension reform. Key words: pension reform, pension system, pension system, pension provision, pension system, pension assets, pension programs, financial risks, pension management.

Hydrogen production by steam reforming methanol for polymer electrolyte fuel cells

International Nuclear Information System (INIS)

Amphlett, J.C.; Creber, K.A.M.; Davis, J.M.; Mann, R.F.; Peppley, B.A.; Stokes, D.M.

1993-01-01

Catalytic steam reforming of methanol has been studied as a means of generating hydrogen for a polymer electrolyte membrane fuel cell. A semi-empirical model of the kinetics of the catalytic steam reforming of methanol over Cu O/Zn O/Al 2 O 3 catalyst has been developed. This model is able to predict the performance of the reformer with respect to the various parameters important in developing an integrated reformer-polymer fuel cell system. A set of sample calculations of reformer temperature and CO production are given. The impact of the performance of the reformer catalyst on the design of the overall fuel cell power system is discussed. The selectivity of the catalyst to minimize CO content in the fuel gas is shown to be more critical than was previously believed. 4 figs., 4 tabs., 11 refs

The effects of polycyclic aromatic hydrocarbons on the immune system of fish: A review

International Nuclear Information System (INIS)

Reynaud, S.; Deschaux, P.

2006-01-01

Polycyclic aromatic hydrocarbons are an important class of environmental pollutants that are known to be carcinogenic and immunotoxic. This review summarizes the diverse literature on the effects of these pollutants on innate and acquired immunity in fish and the mechanism of PAH-induced immunotoxicity. Among innate immune parameters, many authors have focused on macrophage activities in fish exposed to polycyclic aromatic hydrocarbons. Macrophage respiratory burst appears especially sensitive to polycyclic aromatic hydrocarbons. Among acquired immune parameters, lymphocyte proliferation appears highly sensitive to polycyclic aromatic hydrocarbon exposure. However, the effects of polycyclic aromatic hydrocarbons on both specific and non-specific immunity are contradictory and depend on the mode of exposure, the dose used or the species studied. In contrast to mammals, fewer studies have been done in fish to determine the mechanism of polycyclic aromatic hydrocarbon-induced toxicity. This phenomenon seems to implicate different intracellular mechanisms such as metabolism by cytochrome P4501A, binding to the Ah-receptor, or increased intracellular calcium. Advances in basic knowledge of fish immunity should lead to improvements in monitoring fish health and predicting the impact of polycyclic aromatic hydrocarbons on fish populations, which is a fundamental ecotoxicological goal

The effects of polycyclic aromatic hydrocarbons on the immune system of fish: A review

Energy Technology Data Exchange (ETDEWEB)

Reynaud, S. [Laboratoire d' Ecologie Alpine. UMR CNRS 5553. Universite Joseph Fourier. BP 53. 38041 Grenoble cedex 9 (France) and Laboratory of General and Comparative Immunophysiology, Science Teaching and Research Unit, 123, av. Albert Thomas, 87060 Limoges (France)]. E-mail: stephane.reynaud@ujf-grenoble.fr; Deschaux, P. [Laboratory of General and Comparative Immunophysiology, Science Teaching and Research Unit, 123, av. Albert Thomas, 87060 Limoges (France)

2006-05-01

Polycyclic aromatic hydrocarbons are an important class of environmental pollutants that are known to be carcinogenic and immunotoxic. This review summarizes the diverse literature on the effects of these pollutants on innate and acquired immunity in fish and the mechanism of PAH-induced immunotoxicity. Among innate immune parameters, many authors have focused on macrophage activities in fish exposed to polycyclic aromatic hydrocarbons. Macrophage respiratory burst appears especially sensitive to polycyclic aromatic hydrocarbons. Among acquired immune parameters, lymphocyte proliferation appears highly sensitive to polycyclic aromatic hydrocarbon exposure. However, the effects of polycyclic aromatic hydrocarbons on both specific and non-specific immunity are contradictory and depend on the mode of exposure, the dose used or the species studied. In contrast to mammals, fewer studies have been done in fish to determine the mechanism of polycyclic aromatic hydrocarbon-induced toxicity. This phenomenon seems to implicate different intracellular mechanisms such as metabolism by cytochrome P4501A, binding to the Ah-receptor, or increased intracellular calcium. Advances in basic knowledge of fish immunity should lead to improvements in monitoring fish health and predicting the impact of polycyclic aromatic hydrocarbons on fish populations, which is a fundamental ecotoxicological goal.

Organizational Factors and the Implementation of Family to Family: Contextual Elements of Systems Reform

Science.gov (United States)

Crea, Thomas M.; Crampton, David S.; Knight, Nelson; Paine-Wells, Lisa

2011-01-01

In efforts to reform the child welfare system, agency leaders must involve staff at all levels; yet, little research has been done to determine which organizational factors encourage or inhibit staff engagement. Employees from an urban child welfare agency were invited to complete a survey regarding organizational effectiveness and its influence…

Transformation of lipid bodies related to hydrocarbon accumulation in a green alga, Botryococcus braunii (Race B.

Directory of Open Access Journals (Sweden)

Reiko Suzuki

Full Text Available The colonial microalga Botryococcus braunii accumulates large quantities of hydrocarbons mainly in the extracellular space; most other oleaginous microalgae store lipids in the cytoplasm. Botryococcus braunii is classified into three principal races (A, B, and L based on the types of hydrocarbons. Race B has attracted the most attention as an alternative to petroleum by its higher hydrocarbon contents than the other races and its hydrocarbon components, botryococcenes and methylsqualenes, both can be readily converted into biofuels. We studied race B using fluorescence and electron microscopy, and clarify the stage when extracellular hydrocarbon accumulation occurs during the cell cycle, in a correlation with the behavior and structural changes of the lipid bodies and discussed development of the algal colony. New accumulation of lipids on the cell surface occurred after cell division in the basolateral region of daughter cells. While lipid bodies were observed throughout the cell cycle, their size and inclusions were dynamically changing. When cells began dividing, the lipid bodies increased in size and inclusions until the extracellular accumulation of lipids started. Most of the lipids disappeared from the cytoplasm concomitant with the extracellular accumulation, and then reformed. We therefore hypothesize that lipid bodies produced during the growth of B. braunii are related to lipid secretion. New lipids secreted at the cell surface formed layers of oil droplets, to a maximum depth of six layers, and fused to form flattened, continuous sheets. The sheets that combined a pair of daughter cells remained during successive cellular divisions and the colony increased in size with increasing number of cells.

Two decades of reforms. Appraisal of the financial reforms in the Russian public healthcare sector.

Science.gov (United States)

Gordeev, Vladimir S; Pavlova, Milena; Groot, Wim

2011-10-01

This paper reviews the empirical evidence on the outcomes of the financial reforms in the Russian public healthcare sector. A systematic literature review identified 37 relevant publications that presented empirical evidence on changes in quality, equity, efficiency and sustainability in public healthcare provision due to the Russian public healthcare financial reforms. Evidence suggests that there are substantial inter-regional inequalities across income groups both in terms of financing and access to public healthcare services. There are large efficiency differences between regions, along with inter-regional variations in payment and reimbursement mechanisms. Informal and quasi-formal payments deteriorate access to public healthcare services and undermine the overall financing sustainability. The public healthcare sector is still underfinanced, although the implementation of health insurance gave some premises for future increases of efficiency. Overall, the available empirical data are not sufficient for an evidence-based evaluation of the reforms. More studies on the quality, equity, efficiency and sustainability impact of the reforms are needed. Future reforms should focus on the implementation of cost-efficiency and cost-control mechanisms; provide incentives for better allocation and distribution of resources; tackle problems in equity in access and financing; implement a system of quality controls; and stimulate healthy competition between insurance companies. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Steam Reforming of Low-Level Mixed Waste

Energy Technology Data Exchange (ETDEWEB)

None

1998-01-01

Under DOE Contract No. DE-AR21-95MC32091, Steam Reforming of Low-Level Mixed Waste, ThermoChem has successfully designed, fabricated and operated a nominal 90 pound per hour Process Development Unit (PDU) on various low-level mixed waste surrogates. The design construction, and testing of the PDU as well as performance and economic projections for a 500- lb/hr demonstration and commercial system are described. The overall system offers an environmentally safe, non-incinerating, cost-effective, and publicly acceptable method of processing LLMW. The steam-reforming technology was ranked the No. 1 non-incineration technology for destruction of hazardous organic wastes in a study commissioned by the Mixed Waste Focus Area published April 1997.1 The ThermoChem steam-reforming system has been developed over the last 13 years culminating in this successful test campaign on LLMW surrogates. Six surrogates were successfidly tested including a 750-hour test on material simulating a PCB- and Uranium- contaminated solid waste found at the Portsmouth Gaseous Diffusion Plant. The test results indicated essentially total (>99.9999oA) destruction of RCRA and TSCA hazardous halogenated organics, significant levels of volume reduction (> 400 to 1), and retention of radlonuclides in the volume-reduced solids. Cost studies have shown the steam-reforming system to be very cost competitive with more conventional and other emerging technologies.

Building institutions for an effective health system: lessons from China's experience with rural health reform.

Science.gov (United States)

Bloom, Gerald

2011-04-01

This paper is concerned with the management of health system changes aimed at substantially increasing the access to safe and effective health services. It argues that an effective health sector relies on trust-based relationships between users, providers and funders of health services, and that one of the major challenges governments face is to construct institutional arrangements within which these relationships can be embedded. It presents the case of China, which is implementing an ambitious health reform, drawing on a series of visits to rural counties by the author over a 10-year period. It illustrates how the development of reform strategies has been a response both to the challenges arising from the transition to a market economy and the result of actions by different actors, which have led to the gradual creation of increasingly complex institutions. The overall direction of change has been strongly influenced by the efforts made by the political leadership to manage a transition to a modern economy which provides at least some basic benefits to all. The paper concludes that the key lessons for other countries from China's experience with health system reform are less about the detailed design of specific interventions than about its approach to the management of institution-building in a context of complexity and rapid change. Copyright © 2011 Elsevier Ltd. All rights reserved.

Total hydrocarbon content (THC) testing in liquid oxygen (LOX) systems

Science.gov (United States)

Meneghelli, B. J.; Obregon, R. E.; Ross, H. R.; Hebert, B. J.; Sass, J. P.; Dirschka, G. E.

2015-12-01

The measured Total Hydrocarbon Content (THC) levels in liquid oxygen (LOX) systems at Stennis Space Center (SSC) have shown wide variations. Examples of these variations include the following: 1) differences between vendor-supplied THC values and those obtained using standard SSC analysis procedures; and 2) increasing THC values over time at an active SSC test stand in both storage and run vessels. A detailed analysis of LOX sampling techniques, analytical instrumentation, and sampling procedures will be presented. Additional data obtained on LOX system operations and LOX delivery trailer THC values during the past 12-24 months will also be discussed. Field test results showing THC levels and the distribution of the THC's in the test stand run tank, modified for THC analysis via dip tubes, will be presented.

Social Work's Role in Medicaid Reform: A Qualitative Study.

Science.gov (United States)

Bachman, Sara S; Wachman, Madeline; Manning, Leticia; Cohen, Alexander M; Seifert, Robert W; Jones, David K; Fitzgerald, Therese; Nuzum, Rachel; Riley, Patricia

2017-12-01

To critically analyze social work's role in Medicaid reform. We conducted semistructured interviews with 46 stakeholders from 10 US states that use a range of Medicaid reform approaches. We identified participants using snowball and purposive sampling. We gathered data in 2016 and analyzed them using qualitative methods. Multiple themes emerged: (1) social work participates in Medicaid reform through clinical practice, including care coordination and case management; (2) there is a gap between social work's practice-level and systems-level involvement in Medicaid innovations; (3) factors hindering social work's involvement in systems-level practice include lack of visibility, insufficient clarity on social work's role and impact, and too few resources within professional organizations; and (4) social workers need more training in health transformation payment models and policy. Social workers have unique skills that are valuable to building health systems that promote population health and reduce health inequities. Although there is considerable opportunity for social work to increase its role in Medicaid reform, there is little social work involvement at the systems level.

Geophysical Monitoring of Hydrocarbon-Contaminated Soils Remediated with a Bioelectrochemical System.

Science.gov (United States)

Mao, Deqiang; Lu, Lu; Revil, André; Zuo, Yi; Hinton, John; Ren, Zhiyong Jason

2016-08-02

Efficient noninvasive techniques are desired for monitoring the remediation process of contaminated soils. We applied the direct current resistivity technique to image conductivity changes in sandbox experiments where two sandy and clayey soils were initially contaminated with diesel hydrocarbon. The experiments were conducted over a 230 day period. The removal of hydrocarbon was enhanced by a bioelectrochemical system (BES) and the electrical potentials of the BES reactors were also monitored during the course of the experiment. We found that the variation in electrical conductivity shown in the tomograms correlate well with diesel removal from the sandy soil, but this is not the case with the clayey soil. The clayey soil is characterized by a larger specific surface area and therefore a larger surface conductivity. In sandy soil, the removal of the diesel and products from degradation leads to an increase in electrical conductivity during the first 69 days. This is expected since diesel is electrically insulating. For both soils, the activity of BES reactors is moderately imaged by the inverted conductivity tomogram of the reactor. An increase in current production by electrochemically active bacteria activity corresponds to an increase in conductivity of the reactor.

Reforming Organizational Structures

OpenAIRE

Van de Walle, Steven

2016-01-01

textabstractPublic sectors have undergone major transformations. Public sector reform touches upon the core building blocks of the public sector: organizational structures, people and finances. These are objects of reform. This chapter presents and discusses a set of major transformations with regard to organizational structures. It provides readers a fairly comprehensive overview of the key reforms that have taken place in Western public sectors. Structural reforms in the public sector show ...

SOLID FUEL OF HYDROCARBON, WOOD AND AGRICULTURAL WASTE FOR LOCAL HEAT SUPPLY SYSTEMS

Directory of Open Access Journals (Sweden)

B. M. Khroustalev

2017-01-01

Full Text Available In Belarus oil refining and oil producing industries are paid close attention. On the background of the active maintaining the level of oil processing and volume of oil extraction in our country and in the countries of the Eurasian Economic Union there is a steady formation of hydrocarbon-containing waste; therefore recycling of the latter is an urgent task to improve the competitiveness of production. The most cost-effective way of using hydrocarbon waste is the conversion of it into power resources. In this case it is possible to obtain significant power-saving and economic effect of the combined use of a hydrocarbon, wood, agricultural and other combustible waste, meanwhile improving the ecological situation at the sites of waste storage and creating a solid fuel with the necessary energy and specified physical-and-chemical properties. A comprehensive solution of a recycling problem makes it possible to use as energy resources a lot of waste that has not found application in other technologies, to produce alternative multi-component fuel which structure meets environmental and energy requirement for local heating systems. In addition, the implementation of such technology will make it possible to reduce power consumption of enterprises of various kinds that consume fuel and will also increase the share of local fuels in the energy balance of a particular region.

AD1995: NW Europe's hydrocarbon industry

International Nuclear Information System (INIS)

Glennie, K.; Hurst, A.

1996-01-01

This volume concerns itself with wide-ranging aspects of the upstream hydro-carbon industry over the whole of NW Europe. As such, the book contrasts with many thematic volumes by presenting a broad range of topics side-by-side. One section of the book looks back at the history of geological exploration and production, and provides an overview of hydrocarbon exploration across NW Europe. Another section covers the state of the art in hydrocarbon exploration and production. This includes an update on computer-based basin modelling overpressure systems, innovations in reservoir engineering and reserve estimation, 3D seismic and the geochemical aspects of secondary migration. The final section of the book takes a look into the future. This covers the remaining hydrocarbon resources of the North Sea, managing risk in oil field development, oil field economics, and pollution and the environment. It is the editors' hope that several key areas of NW Europe's upstream oil industry have been usefully summarized in the volume. (Author)

Isotope reversals in hydrocarbon gases of natural shale systems and well head production data

Energy Technology Data Exchange (ETDEWEB)

Berner, U.; Schloemer, S.; Stiller, E. [Bundesanstalt fuer Geowissenschaften und Rohstoffe (BGR), Hannover (Germany); Marquardt, D. [Rijksuniversiteit Utrecht (Netherlands)

2013-08-01

Relationships between gas geochemical signatures and the thermal maturity of source rocks containing aquatic organic matter are based on on pyrolysis experiments and have been successfully used in conventional hydrocarbon exploration since long. We demonstrate how these models can be applied to the evaluation of unconventional shale resources. For this purpose hydrocarbon gases have been extracted from low and high mature source rocks (type II kerogens) using laboratory desorption techniques. We determined the molecular composition of the gases as well as the carbon isotope ratios of methane to propane. In the extracted gases we observe an increase of {sup 13}C content in methane with increasing dry gas ratio (C1/{Sigma}C1-6). The carbon isotope ratios of ethane and propane initially increase with increasing dryness but start to become isotopically lighter above a dry gas ratio of 0.8. We show that oil-to-gas cracking explains the observed gas geochemical data, and that mixing between gases from different processes is a key factor to describe natural hydrocarbon systems of shales. However, data from published case studies using well head gases which show 'isotope roll-over' effects indicate that the isotopic reversal observed in well head samples deviate from those observed in natural shale systems in a fundamental way. We show that isotope reversals related to well head gases are best explained by an additional isotope fractionation effect induced through hydraulic fracturing and gas migration from the shale to the well head. Although, this induced isotope fractionation is an artifact which obscures isotopic information of natural systems to a large extend, we suggest a simple classification scheme which allows distinguishing between hot and cool spot areas using well head or mud line gas data. (orig.)

Reforming process. Reformierungsverfahren

Energy Technology Data Exchange (ETDEWEB)

McCoy, C.S.

1982-05-19

A naphta fraction is subjected to a catalytic reforming process in several series-connected reactors. The first reactor is equipped with a moving catalyst bed containing not more the 30% of volume of the total catalyst amount. The other reactors are designed as packed-bed systems. The content of coke deposited on the catalyst of the first reactor owing to the reforming process is maintained at below 1% of weight. This is effected by periodic removal of a proportion of the contaminated catalyst from the bottom part of the bed, by its regeneration and re-feeding to the top part of the bed. This results in prolonged service life of the catalyst and simultaneous improvement of the anti-knock value of the product.

Development of gas chromatography-flame ionization detection system with a single column and liquid nitrogen-free for measuring atmospheric C2-C12 hydrocarbons.

Science.gov (United States)

Liu, Chengtang; Mu, Yujing; Zhang, Chenglong; Zhang, Zhibo; Zhang, Yuanyuan; Liu, Junfeng; Sheng, Jiujiang; Quan, Jiannong

2016-01-04

A liquid nitrogen-free GC-FID system equipped with a single column has been developed for measuring atmospheric C2-C12 hydrocarbons. The system is consisted of a cooling unit, a sampling unit and a separation unit. The cooling unit is used to meet the temperature needs of the sampling unit and the separation unit. The sampling unit includes a dehydration tube and an enrichment tube. No breakthrough of the hydrocarbons was detected when the temperature of the enrichment tube was kept at -90 °C and sampling volume was 400 mL. The separation unit is a small round oven attached on the cooling column. A single capillary column (OV-1, 30 m × 0.32 mm I.D.) was used to separate the hydrocarbons. An optimal program temperature (-60 ∼ 170 °C) of the oven was achieved to efficiently separate C2-C12 hydrocarbons. There were good linear correlations (R(2)=0.993-0.999) between the signals of the hydrocarbons and the enrichment amount of hydrocarbons, and the relative standard deviation (RSD) was less than 5%, and the method detection limits (MDLs) for the hydrocarbons were in the range of 0.02-0.10 ppbv for sampling volume of 400 mL. Field measurements were also conducted and more than 50 hydrocarbons from C2 to C12 were detected in Beijing city. Copyright © 2015 Elsevier B.V. All rights reserved.

Methodological aspects of fuel performance system analysis at raw hydrocarbon processing plants

Science.gov (United States)

Kulbjakina, A. V.; Dolotovskij, I. V.

2018-01-01

The article discusses the methodological aspects of fuel performance system analysis at raw hydrocarbon (RH) processing plants. Modern RH processing facilities are the major consumers of energy resources (ER) for their own needs. To reduce ER, including fuel consumption, and to develop rational fuel system structure are complex and relevant scientific tasks that can only be done using system analysis and complex system synthesis. In accordance with the principles of system analysis, the hierarchical structure of the fuel system, the block scheme for the synthesis of the most efficient alternative of the fuel system using mathematical models and the set of performance criteria have been developed on the main stages of the study. The results from the introduction of specific engineering solutions to develop their own energy supply sources for RH processing facilities have been provided.

Session 4: On-board exhaust gas reforming for improved performance of natural gas HCCI engines

Energy Technology Data Exchange (ETDEWEB)

Amieiro, A.; Golunski, S.; James, D. [Johnson Matthey Technology Centre, Sonning Common, Reading (United Kingdom); Miroslaw, Wyszynski; Athanasios, Megaritis; Peucheret, S. [Birmingham Univ., School of Engineering, Future Power Systems Research Group (United Kingdom); Hongming, Xu [Jaguar Cars Ltd, W/2/021 Engineering Centre, Whitley, Coventry (United Kingdom)

2004-07-01

Although natural gas (NG) is a non-renewable energy source, it is still a very attractive alternative fuel for transportation - it is inexpensive, abundant, and easier to refine than petroleum. Unfortunately the minimum spark energy required for NG ignition is higher than for liquid fuels, and engine performance is reduced since the higher volume of NG limits the air breathing capacity of the cylinders. On the other hand, the flammability range of NG is wider than for other hydrocarbons, so the engine can operate under leaner conditions. Environmentally, the use of NG is particularly attractive since it has a low flame temperature (resulting in reduced NO{sub x} emissions) and a low carbon content compared to diesel or gasoline (resulting in less CO, CO{sub 2} and particulate). In addition, NG is easily made sulphur-free, and has a high octane rating (RON = 110-130) which makes it suitable for high compression engine applications. Exhaust gas recirculation (EGR) into an engine is known to reduce both flame temperature and speed, and therefore produce lower NO{sub x} emissions. In general, a given volume of exhaust gas has a greater effect on flame speed and NO{sub x} emissions than the same quantity of excess air, although there is a limit to the amount of exhaust gas recirculation that can be used without inhibiting combustion. However, hydrogen addition to exhaust gas recirculation has been proved to reduce emissions while increasing flame speed, so improving both the emissions and the thermal efficiency of the engine. On-board reforming of some of the fuel, by reaction with exhaust gas during EGR, is a novel way of adding hydrogen to an engine. We have carried out reforming tests on mixtures of natural gas and exhaust gas at relatively low temperatures (400-600 C), to mimic the low availability of external heat within the integrated system. The reforming catalyst is a nickel-free formulation, containing precious metals promoted by metal oxides. The roles of

Hydrocarbon Rocket Technology Impact Forecasting

Science.gov (United States)

Stuber, Eric; Prasadh, Nishant; Edwards, Stephen; Mavris, Dimitri N.

2012-01-01

Ever since the Apollo program ended, the development of launch propulsion systems in the US has fallen drastically, with only two new booster engine developments, the SSME and the RS-68, occurring in the past few decades.1 In recent years, however, there has been an increased interest in pursuing more effective launch propulsion technologies in the U.S., exemplified by the NASA Office of the Chief Technologist s inclusion of Launch Propulsion Systems as the first technological area in the Space Technology Roadmaps2. One area of particular interest to both government agencies and commercial entities has been the development of hydrocarbon engines; NASA and the Air Force Research Lab3 have expressed interest in the use of hydrocarbon fuels for their respective SLS Booster and Reusable Booster System concepts, and two major commercially-developed launch vehicles SpaceX s Falcon 9 and Orbital Sciences Antares feature engines that use RP-1 kerosene fuel. Compared to engines powered by liquid hydrogen, hydrocarbon-fueled engines have a greater propellant density (usually resulting in a lighter overall engine), produce greater propulsive force, possess easier fuel handling and loading, and for reusable vehicle concepts can provide a shorter turnaround time between launches. These benefits suggest that a hydrocarbon-fueled launch vehicle would allow for a cheap and frequent means of access to space.1 However, the time and money required for the development of a new engine still presents a major challenge. Long and costly design, development, testing and evaluation (DDT&E) programs underscore the importance of identifying critical technologies and prioritizing investment efforts. Trade studies must be performed on engine concepts examining the affordability, operability, and reliability of each concept, and quantifying the impacts of proposed technologies. These studies can be performed through use of the Technology Impact Forecasting (TIF) method. The Technology Impact

NEW MATERIAL NEEDS FOR HYDROCARBON FUEL PROCESSING: Generating Hydrogen for the PEM Fuel Cell

Science.gov (United States)

Farrauto, R.; Hwang, S.; Shore, L.; Ruettinger, W.; Lampert, J.; Giroux, T.; Liu, Y.; Ilinich, O.

2003-08-01

The hydrogen economy is fast approaching as petroleum reserves are rapidly consumed. The fuel cell promises to deliver clean and efficient power by combining hydrogen and oxygen in a simple electrochemical device that directly converts chemical energy to electrical energy. Hydrogen, the most plentiful element available, can be extracted from water by electrolysis. One can imagine capturing energy from the sun and wind and/or from the depths of the earth to provide the necessary power for electrolysis. Alternative energy sources such as these are the promise for the future, but for now they are not feasible for power needs across the globe. A transitional solution is required to convert certain hydrocarbon fuels to hydrogen. These fuels must be available through existing infrastructures such as the natural gas pipeline. The present review discusses the catalyst and adsorbent technologies under development for the extraction of hydrogen from natural gas to meet the requirements for the proton exchange membrane (PEM) fuel cell. The primary market is for residential applications, where pipeline natural gas will be the source of H2 used to power the home. Other applications including the reforming of methanol for portable power applications such as laptop computers, cellular phones, and personnel digital equipment are also discussed. Processing natural gas containing sulfur requires many materials, for example, adsorbents for desulfurization, and heterogeneous catalysts for reforming (either autothermal or steam reforming) water gas shift, preferential oxidation of CO, and anode tail gas combustion. All these technologies are discussed for natural gas and to a limited extent for reforming methanol.

Thoughts on a comprehensive tax reform

Institute of Scientific and Technical Information of China (English)

Li Wanfu

2015-01-01

"The Decision on Several Major Issues Regarding the Deepening of Reform" adopted by the Third Plenum of the Eighteenth Session of the CPC Central Committee gave a new position to the next round of tax reform,and proposed its objectives,tone,mission,and core tasks.The new round of tax reform should cover a wide range of issues,including state governance,tax legislation,economic reform and development,social management,globalization,ecological and environmental protection,improvement of tax collection,as well as other related issues.Particular attention should be paid to replacing business tax with VAT,completing legislation on VAT,adjusting the scope,collection mechanisms,and rates of consumption tax;strengthening regulation and control,implementing a personal income tax system that considers both aggregate income and income by source,promoting real estate tax legislation,expanding the ad valorem natural resource tax,accelerating the gradual replacement of fees with taxes,and introducing legislation on environmental protection taxes.

Project IVOR - Implementing victim-oriented reform of the criminal justice system in the European Union

NARCIS (Netherlands)

Biffi, Emanuela; Mulder, Eva; Pemberton, Antony; Santos, Manuela; Valério, Mafalda; Vanfraechem, Inge; van der Vorm, Benny

2016-01-01

Project IVOR – Implementing victim-oriented reform of the criminal justice system in the European Union (2014-2016) offers an overview of current research into and with victims’ rights and services, identifying lacunas in the knowledge base and offering a model which can serve to connect experience

Polarization and Policy Reform : Anti-Corruption Policymaking in Sub-Saharan Africa

NARCIS (Netherlands)

Torenvlied, René; Klein Haarhuis, Carolien M.

2008-01-01

The ability of political systems to adopt policy reforms contributes to their internal stability. This article analyses 29 anti-corruption reforms in seven sub-Saharan countries. It seeks to explain the level of adopted reform in these countries from conflicts of interests between policy actors. Two

Identifying future directions for subsurface hydrocarbon migration research

Science.gov (United States)

Leifer, I.; Clark, J. F.; Luyendyk, B.; Valentine, D.

Subsurface hydrocarbon migration is important for understanding the input and impacts of natural hydrocarbon seepage on the environment. Great uncertainties remain in most aspects of hydrocarbon migration, including some basic mechanisms of this four-phase flow of tar, oil, water, and gas through the complex fracture-network geometry particularly since the phases span a wide range of properties. Academic, government, and industry representatives recently attended a workshop to identify the areas of greatest need for future research in shallow hydrocarbon migration.Novel approaches such as studying temporal and spatial seepage variations and analogous geofluid systems (e.g., geysers and trickle beds) allow deductions of subsurface processes and structures that remain largely unclear. Unique complexities exist in hydrocarbon migration due to its multiphase flow and complex geometry, including in-situ biological weathering. Furthermore, many aspects of the role of hydrocarbons (positive and negative) in the environment are poorly understood, including how they enter the food chain (respiration, consumption, etc.) and “percolate” to higher trophic levels. But understanding these ecological impacts requires knowledge of the emissions' temporal and spatial variability and trajectories.

Reform, change, and continuity in Finnish health care.

Science.gov (United States)

Häkkinen, Unto; Lehto, Juhani

2005-01-01

This article describes some essential aspects of the Finnish political and governmental system and the evolution of the basic institutional elements of the health care system. We examine the developments that gave rise to a series of health care reforms and reform proposals in the late 1980s and early 1990s and relate them to changes in health care expenditure, structure, and performance. Finally, we discuss the relationship between policy changes, reforms, and health system changes and the strength of neo-institutional theory in explaining both continuity and change. Much of the change in Finnish health care can be explained by institutional path dependency. The tradition of strong but small local authorities and the lack of legitimate democratic regional authorities as well as the coexistence of a dominant Beveridge-style health system with a marginal Bismarckian element explain the specific path of Finnish health care reform. Public responsibility for health care has been decentralized to smaller local authorities (known as municipalities) more than in any other country. Even an exceptionally deep economic recession in the early 1990s did not lead to systems change; rather, the economic imperative was met by the traditional centralized policy pattern. Some of the developments of the 1990s are, however, difficult to explain by institutional theory. Thus, there is a need for testing alternative theories as well.

Implementing health care reform: implications for performance of public hospitals in central Ethiopia.

Science.gov (United States)

Manyazewal, Tsegahun; Matlakala, Mokgadi C

2018-06-01

Understanding the way health care reforms have succeeded or failed thus far would help policy makers cater continued reform efforts in the future and provides insight into possible levels of improvement in the health care system. This work aims to assess and describe the implications of health care reform on the performance of public hospitals in central Ethiopia. A facility-based, cross-sectional study was carried out in five public hospitals with different operational characteristics that have been implementing health care reform in central Ethiopia. The reform documents were reviewed to assess the nature and targets of the reform for interpretive analysis. Adopting dimensions of health system performance as the theoretical framework, a self-administered questionnaire was developed. Consenting health care professionals who have been involved in the reform from inception to implementation filled the questionnaire. Cronbach's alpha was measured to ensure internal consistency of the instrument. Descriptive statistics, weighted median score, χ 2 , and Mann-Whitney U and Kruskal-Wallis tests were used for data analysis. s Despite implementation of the reform, the health care system in public hospitals was still fragmented as confirmed by 50% of respondents. Limited effects were reported in favour of quality (48%), access (50%), efficiency (51%), sustainability (53%), and equity (61%) of care, while poor effects were reported in patient-provider (41%) and provider-management (32%) interactions. Though there was substantial gain in infrastructure and workspace, stewardship of health care resources was less benefited. The predominant hindrances of the reform were the working environment (adjusted Odds Ratio (aOR) = 2.27, 95% confidence interval (CI): 1.15-4.47), financial resources (aOR = 3.54, 95%CI = 1.97-6.33), management (aOR = 2.27, 95% CI = 1.15-4.47), and information technology system (aOR = 3.15, 95% CI = 1.57-6.32). s The Ethiopian

Thermoeconomic Optimization of Cascade Refrigeration System Using Mixed Carbon Dioxide and Hydrocarbons at Low Temperature Circuit

Directory of Open Access Journals (Sweden)

Nasruddin Nasruddin

2016-12-01

Full Text Available Many applications and industrial processes require very low cooling temperature, such as cold storage in the biomedical field, requiring temperature below -80 °C. However,single-cycle refrigeration systems can only achieve the effective cooling temperature of -40 °C and, also, the performance of the cycle will decrease drastically for cooling temperatures lower than -35°C. Currently, most of cascade refrigeration systems use refrigerants that have ozone depletion potential (ODP and global warming potential (GWP, therefore, in this study, a cascade system is simulated using a mixture of environmentally friendly refrigerants, namely, carbon dioxide and a hydrocarbon (propane, ethane or ethylene as the refrigerant of the low temperature circuit. A thermodynamic analysis is performed to determine the optimal composition of the mixture of carbon dioxide and hydrocarbons in the scope of certain operating parameters. In addition, an economic analysis was also performed to determine the annual cost to be incurred from the cascade refrigeration system. The multi-objective/thermoeconomic optimization points out optimal operating parameter values of the system, to addressing both exergy efficiency and its relation to the costs to be incurred.

Distribution of hydrocarbon-utilizing microorganisms and hydrocarbon biodegradation potentials in Alaskan continental shelf areas

International Nuclear Information System (INIS)

Roubal, G.; Atlas, R.M.

1978-01-01

Hydrocarbon-utilizing microogranisms were enumerated from Alaskan continental shelf areas by using plate counts and a new most-probable-number procedure based on mineralization of 14 C-labeled hydrocarbons. Hydrocarbon utilizers were ubiquitously distributed, with no significant overall concentration differences between sampling regions or between surface water and sediment samples. There were, however, significant seasonal differences in numbers of hydrocarbon utilizers. Distribution of hydrocarbon utilizers within Cook Inlet was positively correlated with occurrence of hydrocarbons in the environment. Hydrocarbon biodegradation potentials were measured by using 14 C-radiolabeled hydrocarbon-spiked crude oil. There was no significant correlation between numbers of hydrocarbon utilizers and hydrocarbon biodegradation potentials. The biodegradation potentials showed large seasonal variations in the Beaufort Sea, probably due to seasonal depletion of available nutrients. Non-nutrient-limited biodegradation potentials followed the order hexadecane > naphthalene >> pristane > benzanthracene. In Cook Inlet, biodegradation potentials for hexadecane and naphthalene were dependent on availability of inorganic nutrients. Biodegradation potentials for pristane and benzanthracene were restricted, probably by resistance to attack by available enzymes in the indigenous population

The Soft Underbelly of System Change: The Role of Leadership and Organizational Climate in Turnover during Statewide Behavioral Health Reform

OpenAIRE

Aarons, Gregory A.; Sommerfeld, David H.; Willging, Cathleen E.

2011-01-01

This study examined leadership, organizational climate, staff turnover intentions, and voluntary turnover during a large-scale statewide behavioral health system reform. The initial data collection occurred nine months after initiation of the reform with a follow-up round of data collected 18 months later. A self-administered structured assessment was completed by 190 participants (administrators, support staff, providers) employed by 14 agencies. Key variables included leadership, organizati...

Final report of the National Health and Hospitals Reform Commission: will we get the health care governance reform we need?

Science.gov (United States)

Stoelwinder, Johannes U

2009-10-05

The National Health and Hospitals Reform Commission (NHHRC) has recommended that Australia develop a "single health system", governed by the federal government. Steps to achieving this include: a "Healthy Australia Accord" to agree on the reform framework; the progressive takeover of funding of public hospitals by the federal government; and the possible implementation of a consumer-choice health funding model, called "Medicare Select". These proposals face significant implementation issues, and the final solution needs to deal with both financial and political sustainability. If the federal and state governments cannot agree on a reform plan, the Prime Minister may need to go to the electorate for a mandate, which may be shaped by other economic issues such as tax reform and intergenerational challenges.

 Railway Reforms

DEFF Research Database (Denmark)

Asmild, Mette; Holvad, Torben; Hougaard, Jens Leth

This paper considers railway operations in 23 European countries during 1995-2001, where a series of reform initiatives were launched by the European Commission, and analyses whether these reform initiatives improved the operating efficiency of the railways. Efficiency is measured using Multi......-directional Efficiency Analysis, which enables investigation of how railway reforms affect the inefficiencies of specific cost drivers. The main findings are that the reform initiatives generally improve operating efficiency but potentially differently for different cost drivers. Specifically, the paper provides clear...

Tax Reform in Brazil: a Public Choice Theory approach

Directory of Open Access Journals (Sweden)

Allan Silveira dos Santos

2013-12-01

Full Text Available This article aims to analyze tax reform necessity and the barriers to the implementation of tax reform at the light of public choice theory. The research identifies the arguments that provides the explanation for the tax reform does not occur in Brazil. The question that the article searches to answer is: what are the justifications for the Brazil not have done tax reform? The literature review addresses the failures of government, public choice theory and the theory of optimal taxation. The evidence and studies show that there are reasons to think about a tax system more consistent with the Brazilian reality, indicating the existence of "government failures" that may be the probable cause of impairment of the tax reform.

Prisons and Sentencing Reform.

Science.gov (United States)

Galvin, Jim

1983-01-01

Reviews current themes in sentencing and prison policy. The eight articles of this special issue discuss selective incapacitation, prison bed allocation models, computer-scored classification systems, race and gender relations, commutation, parole, and a historical review of sentencing reform. (JAC)

Learning Not Borrowing from the Queensland Education System: Lessons on Curricular, Pedagogical and Assessment Reform

Science.gov (United States)

Mills, Martin; McGregor, Glenda

2016-01-01

This paper provides a detailed account of the Queensland education system's engagement with reforming curriculum, pedagogies and assessment. In so doing, it responds to the University College London's Institute of Education report on "high-performing" jurisdictions, of which Queensland, Australia, was identified as one. In this report,…

Health reforms as examples of multilevel interventions in cancer care.

Science.gov (United States)

Flood, Ann B; Fennell, Mary L; Devers, Kelly J

2012-05-01

To increase access and improve system quality and efficiency, President Obama signed the Patient Protection and Affordable Care Act with sweeping changes to the nation's health-care system. Although not intended to be specific to cancer, the act's implementation will profoundly impact cancer care. Its components will influence multiple levels of the health-care environment including states, communities, health-care organizations, and individuals seeking care. To illustrate these influences, two reforms are considered: 1) accountable care organizations and 2) insurance-based reforms to gather evidence about effectiveness. We discuss these reforms using three facets of multilevel interventions: 1) their intended and unintended consequences, 2) the importance of timing, and 3) their implications for cancer. The success of complex health reforms requires understanding the scientific basis and evidence for carrying out such multilevel interventions. Conversely and equally important, successful implementation of multilevel interventions depends on understanding the political setting and goals of health-care reform.

Reliable in their failure: an analysis of healthcare reform policies in public systems.

Science.gov (United States)

Contandriopoulos, Damien; Brousselle, Astrid

2010-05-01

In this paper, we analyze recommendations of past governmental commissions and their implementation in Quebec as a case to discuss the obstacles that litter the road to healthcare system reform. Our analysis shows that the obstacles to tackling the healthcare system's main problems may have less to do with programmatic (what to do) than with political and governance (how to do it) questions. We then draw on neo-institutional theory to discuss the causes and effects of this situation. Copyright (c) 2009 Elsevier Ireland Ltd. All rights reserved.

Land reform in Russia in 1990-2000-ies, or how land reform was "reformed" during the departmental reorganization

Directory of Open Access Journals (Sweden)

Barsukova Svetlana, Yu.

2015-06-01

Full Text Available The paper provides an overview of the land reform in Russia's recent history. Analysis of land reform, which started in 1990, shows what actions and what logic led the land sector in the state in which it was at the finish line of the quarter-century reform marathon. The reform process was not linear, it highlighted the steps differing objectives and strategies to achieve them. Land reform is presented as a struggle of different political forces, which were reflected in the redistribution of functions between agencies in lobbying for appointment to senior positions promoted various commands. The authors conclude about the gradual displacement of state regulation of land relations, the deliberate destruction of the land management as a basis for the development of land resources.

The prospects for national health insurance reform.