Constrained Optimization Based on Hybrid Evolutionary Algorithm and Adaptive Constraint-Handling Technique

DEFF Research Database (Denmark)

Wang, Yong; Cai, Zixing; Zhou, Yuren

2009-01-01

A novel approach to deal with numerical and engineering constrained optimization problems, which incorporates a hybrid evolutionary algorithm and an adaptive constraint-handling technique, is presented in this paper. The hybrid evolutionary algorithm simultaneously uses simplex crossover and two...... mutation operators to generate the offspring population. Additionally, the adaptive constraint-handling technique consists of three main situations. In detail, at each situation, one constraint-handling mechanism is designed based on current population state. Experiments on 13 benchmark test functions...... and four well-known constrained design problems verify the effectiveness and efficiency of the proposed method. The experimental results show that integrating the hybrid evolutionary algorithm with the adaptive constraint-handling technique is beneficial, and the proposed method achieves competitive...

Hybrid chemical and nondestructive-analysis technique

International Nuclear Information System (INIS)

Hsue, S.T.; Marsh, S.F.; Marks, T.

1982-01-01

A hybrid chemical/NDA technique has been applied at the Los Alamos National Laboratory to the assay of plutonium in ion-exchange effluents. Typical effluent solutions contain low concentrations of plutonium and high concentrations of americium. A simple trioctylphosphine oxide (TOPO) separation can remove 99.9% of the americium. The organic phase that contains the separated plutonium can be accurately assayed by monitoring the uranium L x-ray intensities

Hybrid Technique of Lamellar Keratoplasty (DMEK-S

Directory of Open Access Journals (Sweden)

Pavel Studeny

2013-01-01

Full Text Available Purpose: To evaluate the outcomes of the hybrid technique of posterior lamellar keratoplasty (DMEK-S. Materials and Methods: 71 eyes of 55 patients enrolled in a single-center study underwent posterior lamellar keratoplasty with a hybrid lamella DMEK-S implanted using a solution implantation technique, owing to endothelial dysfunction. The outcome measures studied were visual acuity and endothelial cell density. Results: The rate of endothelial cell loss caused by surgery was 43.8%. During followups, we observed the stabilization of postoperative findings, or at minimum a very low rate of corneal endothelial cell loss. The UCDVA and BCDVA dramatically improved postoperatively. The rebubbling rate in our group of patients was 61.9%. We replaced the lamella due to its failure or malfunction in 17 patients (23.9%. Conclusion: In summary, DMEK-S combines the advantages of DSEK/DSAEK and DMEK. The central zone of bare Descemet’s membrane and endothelium allows for very good visual outcomes, and the peripheral rim allows for better manipulation of the lamella during implantation. It is an effective method of treating the endothelial dysfunction of various etiologies, but the high complication rate needs to be addressed before widespread implementation of the technique in the future.

High performance technique for database applicationsusing a hybrid GPU/CPU platform

KAUST Repository

Zidan, Mohammed A.

2012-07-28

Many database applications, such as sequence comparing, sequence searching, and sequence matching, etc, process large database sequences. we introduce a novel and efficient technique to improve the performance of database applica- tions by using a Hybrid GPU/CPU platform. In particular, our technique solves the problem of the low efficiency result- ing from running short-length sequences in a database on a GPU. To verify our technique, we applied it to the widely used Smith-Waterman algorithm. The experimental results show that our Hybrid GPU/CPU technique improves the average performance by a factor of 2.2, and improves the peak performance by a factor of 2.8 when compared to earlier implementations. Copyright © 2011 by ASME.

Continuity controlled Hybrid Automata

NARCIS (Netherlands)

Bergstra, J.A.; Middelburg, C.A.

We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation

Continuity Controlled Hybrid Automata

NARCIS (Netherlands)

Bergstra, J.A.; Middelburg, C.A.

2004-01-01

We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of

Continuity controlled hybrid automata

NARCIS (Netherlands)

Bergstra, J.A.; Middelburg, C.A.

2004-01-01

We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of

Continuity controlled hybrid automata

NARCIS (Netherlands)

Bergstra, J.A.; Middelburg, C.A.

2006-01-01

We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of

Stochastic Reachability Analysis of Hybrid Systems

CERN Document Server

Bujorianu, Luminita Manuela

2012-01-01

Stochastic reachability analysis (SRA) is a method of analyzing the behavior of control systems which mix discrete and continuous dynamics. For probabilistic discrete systems it has been shown to be a practical verification method but for stochastic hybrid systems it can be rather more. As a verification technique SRA can assess the safety and performance of, for example, autonomous systems, robot and aircraft path planning and multi-agent coordination but it can also be used for the adaptive control of such systems. Stochastic Reachability Analysis of Hybrid Systems is a self-contained and accessible introduction to this novel topic in the analysis and development of stochastic hybrid systems. Beginning with the relevant aspects of Markov models and introducing stochastic hybrid systems, the book then moves on to coverage of reachability analysis for stochastic hybrid systems. Following this build up, the core of the text first formally defines the concept of reachability in the stochastic framework and then...

Modeling and simulation using the compositional interchange format for hybrid systems

NARCIS (Netherlands)

Sonntag, C.L.W.; Schiffelers, R.R.H.; Beek, van D.A.; Rooda, J.E.; Engell, S.; Troch, I.; Breitenecker, F.

2009-01-01

One of the major challenges towards a broad industrial acceptance of hybrid systems techniques and tools is the large number of distinct modeling formalisms and the resulting manual effort for the tool-based solution of many complex design or analysis tasks. A promising approach to achieve

Process algebras for hybrid systems : comparison and development

NARCIS (Netherlands)

Khadim, U.

2008-01-01

Our research is about formal speci¯cation and analysis of hybrid systems. The formalism used is process algebra. Hybrid systems are systems that exhibit both discrete and continuous behaviour. An example of a hybrid system is a digital controller controlling a physical device such as present in

SU-E-T-16: A Hybrid VMAT/IMRT Technique for the Treatment of Nasopharyngeal Carcinoma

International Nuclear Information System (INIS)

Zhao, N; Yang, R; Wang, J

2014-01-01

Purpose: To investigate a Hybrid VMAT/IMRT technique which combines volumetric modulated arc therapy (VMAT) and intensity modulated radiation therapy (IMRT) for nasopharyngeal carcinoma (NPC). Methods: 2 full arcs VMAT, 9-field IMRT and Hybrid VMAT/IMRT plans were created for 10 patients with NPC. The Hybrid VMAT/IMRT technique consisted of 1 full VMAT arc and 7 IMRT fields. The dose distribution of planning target volume (PTV) and organs at risk (OARs) for Hybrid VMAT/IMRT was compared with IMRT and VMAT. The monitor units (MUs) were also evaluated. Results: The Hybrid VMAT/IMRT technique significantly improved target dose homogeneity compared with IMRT and VMAT for PTV70 and PTV54. For PTV70 and PTV60, the Hybrid VMAT/IMRT technique significantly improved target dose conformity compared with IMRT (0.62 vs 0.47; p<0.05 and 0.64 vs 0.58; p<0.05, respectively) and VMAT (0.62 vs 0.43; p<0.05 and 0.64 vs 0.6; p<0.05, respectively). The near maximum dose (D2%) of temporomandibular joint (TMJ), temporal lobe and mandible for Hybrid plans were 5.5%, 7.9% and 5.2% lower than IMRT plans (p<0.05). The mean dose of TMJ, temporal lobe, mandible and unspecified tissue for Hybrid plans were 12.8%, 11.4%, 4.2% and 4.1% lower than IMRT plans (p<0.05). The mean dose of right parotid, mandible and unspecified tissue for Hybrid plans were 3.3%, 2.4% and 3.1% lower than VMAT plans (p<0.05). The mean MUs needed for IMRT, VMAT and Hybrid plans were 2256, 507 and 1394, respectively. Conclusion: Hybrid VMAT/IMRT technique significantly improved the target dose homogeneity and conformity compared with IMRT and VMAT and reduced the dose of OARs and unspecified tissue compared with IMRT with fewer MUs. Compared with VMAT, Hybrid VMAT/IMRT technique can better protect parotid gland, mandible and unspecified tissue. Ruijie Yang was funded by the grant project: National Natural Science Foundation of China (No. 81071237). Other authors have no competing interest for this work

SU-E-T-16: A Hybrid VMAT/IMRT Technique for the Treatment of Nasopharyngeal Carcinoma

Energy Technology Data Exchange (ETDEWEB)

Zhao, N; Yang, R; Wang, J [Peking University Third Hospital, Beijing, Beijing (China)

2014-06-01

Purpose: To investigate a Hybrid VMAT/IMRT technique which combines volumetric modulated arc therapy (VMAT) and intensity modulated radiation therapy (IMRT) for nasopharyngeal carcinoma (NPC). Methods: 2 full arcs VMAT, 9-field IMRT and Hybrid VMAT/IMRT plans were created for 10 patients with NPC. The Hybrid VMAT/IMRT technique consisted of 1 full VMAT arc and 7 IMRT fields. The dose distribution of planning target volume (PTV) and organs at risk (OARs) for Hybrid VMAT/IMRT was compared with IMRT and VMAT. The monitor units (MUs) were also evaluated. Results: The Hybrid VMAT/IMRT technique significantly improved target dose homogeneity compared with IMRT and VMAT for PTV70 and PTV54. For PTV70 and PTV60, the Hybrid VMAT/IMRT technique significantly improved target dose conformity compared with IMRT (0.62 vs 0.47; p<0.05 and 0.64 vs 0.58; p<0.05, respectively) and VMAT (0.62 vs 0.43; p<0.05 and 0.64 vs 0.6; p<0.05, respectively). The near maximum dose (D2%) of temporomandibular joint (TMJ), temporal lobe and mandible for Hybrid plans were 5.5%, 7.9% and 5.2% lower than IMRT plans (p<0.05). The mean dose of TMJ, temporal lobe, mandible and unspecified tissue for Hybrid plans were 12.8%, 11.4%, 4.2% and 4.1% lower than IMRT plans (p<0.05). The mean dose of right parotid, mandible and unspecified tissue for Hybrid plans were 3.3%, 2.4% and 3.1% lower than VMAT plans (p<0.05). The mean MUs needed for IMRT, VMAT and Hybrid plans were 2256, 507 and 1394, respectively. Conclusion: Hybrid VMAT/IMRT technique significantly improved the target dose homogeneity and conformity compared with IMRT and VMAT and reduced the dose of OARs and unspecified tissue compared with IMRT with fewer MUs. Compared with VMAT, Hybrid VMAT/IMRT technique can better protect parotid gland, mandible and unspecified tissue. Ruijie Yang was funded by the grant project: National Natural Science Foundation of China (No. 81071237). Other authors have no competing interest for this work.

First-Order Hybrid Logic

DEFF Research Database (Denmark)

Braüner, Torben

2011-01-01

Hybrid logic is an extension of modal logic which allows us to refer explicitly to points of the model in the syntax of formulas. It is easy to justify interest in hybrid logic on applied grounds, with the usefulness of the additional expressive power. For example, when reasoning about time one...... often wants to build up a series of assertions about what happens at a particular instant, and standard modal formalisms do not allow this. What is less obvious is that the route hybrid logic takes to overcome this problem often actually improves the behaviour of the underlying modal formalism....... For example, it becomes far simpler to formulate proof-systems for hybrid logic, and completeness results can be proved of a generality that is simply not available in modal logic. That is, hybridization is a systematic way of remedying a number of known deficiencies of modal logic. First-order hybrid logic...

PEAK-TO-AVERAGE POWER RATIO REDUCTION USING CODING AND HYBRID TECHNIQUES FOR OFDM SYSTEM

OpenAIRE

Bahubali K. Shiragapur; Uday Wali

2016-01-01

In this article, the research work investigated is based on an error correction coding techniques are used to reduce the undesirable Peak-to-Average Power Ratio (PAPR) quantity. The Golay Code (24, 12), Reed-Muller code (16, 11), Hamming code (7, 4) and Hybrid technique (Combination of Signal Scrambling and Signal Distortion) proposed by us are used as proposed coding techniques, the simulation results shows that performance of Hybrid technique, reduces PAPR significantly as compared to Conve...

Mapping of Primary Instructional Methods and Teaching Techniques for Regularly Scheduled, Formal Teaching Sessions in an Anesthesia Residency Program.

Science.gov (United States)

Vested Madsen, Matias; Macario, Alex; Yamamoto, Satoshi; Tanaka, Pedro

2016-06-01

In this study, we examined the regularly scheduled, formal teaching sessions in a single anesthesiology residency program to (1) map the most common primary instructional methods, (2) map the use of 10 known teaching techniques, and (3) assess if residents scored sessions that incorporated active learning as higher quality than sessions with little or no verbal interaction between teacher and learner. A modified Delphi process was used to identify useful teaching techniques. A representative sample of each of the formal teaching session types was mapped, and residents anonymously completed a 5-question written survey rating the session. The most common primary instructional methods were computer slides-based classroom lectures (66%), workshops (15%), simulations (5%), and journal club (5%). The number of teaching techniques used per formal teaching session averaged 5.31 (SD, 1.92; median, 5; range, 0-9). Clinical applicability (85%) and attention grabbers (85%) were the 2 most common teaching techniques. Thirty-eight percent of the sessions defined learning objectives, and one-third of sessions engaged in active learning. The overall survey response rate equaled 42%, and passive sessions had a mean score of 8.44 (range, 5-10; median, 9; SD, 1.2) compared with a mean score of 8.63 (range, 5-10; median, 9; SD, 1.1) for active sessions (P = 0.63). Slides-based classroom lectures were the most common instructional method, and faculty used an average of 5 known teaching techniques per formal teaching session. The overall education scores of the sessions as rated by the residents were high.

Formalizing the concept phase of product development

NARCIS (Netherlands)

Schuts, M.; Hooman, J.

2015-01-01

We discuss the use of formal techniques to improve the concept phase of product realisation. As an industrial application, a new concept of interventional X-ray systems has been formalized, using model checking techniques and the simulation of formal models. cop. Springer International Publishing

A Hybrid Neural Network-Genetic Algorithm Technique for Aircraft Engine Performance Diagnostics

Science.gov (United States)

Kobayashi, Takahisa; Simon, Donald L.

2001-01-01

In this paper, a model-based diagnostic method, which utilizes Neural Networks and Genetic Algorithms, is investigated. Neural networks are applied to estimate the engine internal health, and Genetic Algorithms are applied for sensor bias detection and estimation. This hybrid approach takes advantage of the nonlinear estimation capability provided by neural networks while improving the robustness to measurement uncertainty through the application of Genetic Algorithms. The hybrid diagnostic technique also has the ability to rank multiple potential solutions for a given set of anomalous sensor measurements in order to reduce false alarms and missed detections. The performance of the hybrid diagnostic technique is evaluated through some case studies derived from a turbofan engine simulation. The results show this approach is promising for reliable diagnostics of aircraft engines.

High performance technique for database applicationsusing a hybrid GPU/CPU platform

KAUST Repository

Zidan, Mohammed A.; Bonny, Talal; Salama, Khaled N.

2012-01-01

Hybrid GPU/CPU platform. In particular, our technique solves the problem of the low efficiency result- ing from running short-length sequences in a database on a GPU. To verify our technique, we applied it to the widely used Smith-Waterman algorithm

Human centric security and privacy for the IoT using formal techniques

OpenAIRE

Kammueller, Florian

2018-01-01

In this paper, we summarize a new approach to make security and privacy issues in the Internet of Things (IoT) more transparent for vulnerable users. As a pilot project, we investigate monitoring of Alzheimer’s patients for a low-cost early warning system based on bio-markers supported with smart technologies. To provide trustworthy and secure IoT infrastructures, we employ formal methods and techniques that allow specification of IoT scenarios with human actors, refinement and analysis of at...

Interactive Digital Storytelling: Towards a Hybrid Conceptual Approach

OpenAIRE

Spierling, Ulrike

2005-01-01

1 Introduction In this contribution, Interactive Digital Storytelling is viewed as a hybrid form of game design and cinematic storytelling for the understanding and making of future learning and entertainment applications. The paper shall present formal design models that provide a conceptual bridge between both traditional linear narrative techniques as well as agent-based emergent conversations with virtual characters. In summary, a theoretical classification of thinking models for authors ...

Mapping of Primary Instructional Methods and Teaching Techniques for Regularly Scheduled, Formal Teaching Sessions in an Anesthesia Residency Program

DEFF Research Database (Denmark)

Vested Madsen, Matias; Macario, Alex; Yamamoto, Satoshi

2016-01-01

learning as higher quality than sessions with little or no verbal interaction between teacher and learner. A modified Delphi process was used to identify useful teaching techniques. A representative sample of each of the formal teaching session types was mapped, and residents anonymously completed a 5...... formal teaching session. The overall education scores of the sessions as rated by the residents were high....

Multi-technique hybrid imaging in PET/CT and PET/MR: what does the future hold?

International Nuclear Information System (INIS)

Galiza Barbosa, F. de; Delso, G.; Voert, E.E.G.W. ter; Huellner, M.W.; Herrmann, K.; Veit-Haibach, P.

2016-01-01

Integrated positron-emission tomography and computed tomography (PET/CT) is one of the most important imaging techniques to have emerged in oncological practice in the last decade. Hybrid imaging, in general, remains a rapidly growing field, not only in developing countries, but also in western industrialised healthcare systems. A great deal of technological development and research is focused on improving hybrid imaging technology further and introducing new techniques, e.g., integrated PET and magnetic resonance imaging (PET/MRI). Additionally, there are several new PET tracers on the horizon, which have the potential to broaden clinical applications in hybrid imaging for diagnosis as well as therapy. This article aims to highlight some of the major technical and clinical advances that are currently taking place in PET/CT and PET/MRI that will potentially maintain the position of hybrid techniques at the forefront of medical imaging technologies.

Novel Damage Detection Techniques for Structural Health Monitoring Using a Hybrid Sensor

Directory of Open Access Journals (Sweden)

Dengjiang Wang

2016-01-01

Full Text Available This study presents a technique for detecting fatigue cracks based on a hybrid sensor monitoring system consisting of a combination of intelligent coating monitoring (ICM and piezoelectric transducer (PZT sensors. An experimental procedure using this hybrid sensor system was designed to monitor the cracks generated by fatigue testing in plate structures. A probability of detection (POD model that quantifies the reliability of damage detection for a specific sensor or the nondestructive testing (NDT method was used to evaluate the weight factor for the ICM and PZT sensors. To estimate the uncertainty of model parameters in this study, the Bayesian method was employed. Realistic data from fatigue testing was used to validate the overall method, and the results show that the novel damage detection technique using a hybrid sensor can quantify fatigue cracks more accurately than results obtained by conventional sensor methods.

Resizing Technique-Based Hybrid Genetic Algorithm for Optimal Drift Design of Multistory Steel Frame Buildings

Directory of Open Access Journals (Sweden)

Hyo Seon Park

2014-01-01

Full Text Available Since genetic algorithm-based optimization methods are computationally expensive for practical use in the field of structural optimization, a resizing technique-based hybrid genetic algorithm for the drift design of multistory steel frame buildings is proposed to increase the convergence speed of genetic algorithms. To reduce the number of structural analyses required for the convergence, a genetic algorithm is combined with a resizing technique that is an efficient optimal technique to control the drift of buildings without the repetitive structural analysis. The resizing technique-based hybrid genetic algorithm proposed in this paper is applied to the minimum weight design of three steel frame buildings. To evaluate the performance of the algorithm, optimum weights, computational times, and generation numbers from the proposed algorithm are compared with those from a genetic algorithm. Based on the comparisons, it is concluded that the hybrid genetic algorithm shows clear improvements in convergence properties.

Geometry and Formal Linguistics.

Science.gov (United States)

Huff, George A.

This paper presents a method of encoding geometric line-drawings in a way which allows sets of such drawings to be interpreted as formal languages. A characterization of certain geometric predicates in terms of their properties as languages is obtained, and techniques usually associated with generative grammars and formal automata are then applied…

PEAK-TO-AVERAGE POWER RATIO REDUCTION USING CODING AND HYBRID TECHNIQUES FOR OFDM SYSTEM

Directory of Open Access Journals (Sweden)

Bahubali K. Shiragapur

2016-03-01

Full Text Available In this article, the research work investigated is based on an error correction coding techniques are used to reduce the undesirable Peak-to-Average Power Ratio (PAPR quantity. The Golay Code (24, 12, Reed-Muller code (16, 11, Hamming code (7, 4 and Hybrid technique (Combination of Signal Scrambling and Signal Distortion proposed by us are used as proposed coding techniques, the simulation results shows that performance of Hybrid technique, reduces PAPR significantly as compared to Conventional and Modified Selective mapping techniques. The simulation results are validated through statistical properties, for proposed technique’s autocorrelation value is maximum shows reduction in PAPR. The symbol preference is the key idea to reduce PAPR based on Hamming distance. The simulation results are discussed in detail, in this article.

Analysis of hybrid systems: An ounce of realism can save an infinity of states

DEFF Research Database (Denmark)

Fränzle, Martin

1999-01-01

Hybrid automata have been introduced in both control engineering and computer science as a formal model for the dynamics of hybrid discrete-continuous systems. In the case of so-called linear hybrid automata this formalization supports semi-decision procedures for state reachability, yet no decis...

Combined amplification and hybridization techniques for genome scanning in vegetatively propagated crops

International Nuclear Information System (INIS)

Kahl, G.; Ramser, J.; Terauchi, R.; Lopez-Peralta, C.; Asemota, H.N.; Weising, K.

1998-01-01

A combination of PCR- and hybridization-based genome scanning techniques and sequence comparisons between non-coding chloroplast DNA flanking tRNA genes has been employed to screen Dioscorea species for intra- and interspecific genetic diversity. This methodology detected extensive polymorphisms within Dioscorea bulbifera L., and revealed taxonomic and phylogenetic relationships among cultivated Guinea yams varieties and their potential wild progenitors. Finally, screening of yam germplasm grown in Jamaica permitted reliable discrimination between all major cultivars. Genome scanning by micro satellite-primed PCR (MP-PCR) and random amplified polymorphic DNA (RAPD) analysis in combination with the novel random amplified micro satellite polymorphisms (RAMPO) hybridization technique has shown high potential for the genetic analysis of yams, and holds promise for other vegetatively propagated orphan crops. (author)

Implementation of the Fluorescent in Situ Hybridization technique in the Faculty of Medicine, UdelaR

Directory of Open Access Journals (Sweden)

Andrea Cairus

2017-11-01

Full Text Available The Cytogenetic Laboratory of the Faculty of Medicine processes, on average, 300 annual samples of public and private healthcare centers by conventional cytogenetics. It is essential to implement new techniques to improve the quality of the service offered. The purpose of this work was to implement the Fluorescent in situ Hybridization technique (FISH. An observational, cross-sectional, analytical study was performed. Peripheral blood samples from patients with sex chromosomopathies diagnosed by conventional cytogenetics were analyzed. Fluorescent in situ hybridization technique was applied, comparing results with FISH and with conventional cytogenetics. The percentage of mosaicism detected by conventional cytogenetics and Fluorescent in situ Hybridization was studied: 24 samples were analyzed; 19 presented numerical alterations, 3 structural and 2 both. Numerical alterations were Turner syndrome, Klinefelter syndrome, XXX syndrome and XYY syndrome. Concordance in diagnoses was found for both techniques. For Turner syndrome, 8 of 12 samples corresponded to mosaicism, and there were no significant differences between conventional cytogenetics and the technique studied (p0.05. Klinefelter syndrome and XYY were both presented in a non-mosaic karyotype. For XXX syndrome, a normal line (46, XX was observed in three of the samples, in a percentage close to the cut off. From this research, it will be possible to implement Fluorescent in situ Hybridization in this service, to extend it to other pathologies and to enable the training of human resources; consolidating this laboratory as a national academic reference center.

Towards formalization of inspection using petrinets

International Nuclear Information System (INIS)

Javed, M.; Naeem, M.; Bahadur, F.; Wahab, A.

2014-01-01

Achieving better quality software has always been a challenge for software developers. Inspection is one of the most efficient techniques, which ensure the quality of software during its development. To the best of our knowledge, current inspection techniques are not realized by any formal approach. In this paper, we propose an inspection technique, which is not only backed by the formal mathematical semantics of Petri nets, but also supports inspecting concurrent processes. We also use a case study of an agent based distributed processing system to demonstrate the inspection of concurrent processes. (author)

Developing a hybrid dictionary-based bio-entity recognition technique

Science.gov (United States)

2015-01-01

Background Bio-entity extraction is a pivotal component for information extraction from biomedical literature. The dictionary-based bio-entity extraction is the first generation of Named Entity Recognition (NER) techniques. Methods This paper presents a hybrid dictionary-based bio-entity extraction technique. The approach expands the bio-entity dictionary by combining different data sources and improves the recall rate through the shortest path edit distance algorithm. In addition, the proposed technique adopts text mining techniques in the merging stage of similar entities such as Part of Speech (POS) expansion, stemming, and the exploitation of the contextual cues to further improve the performance. Results The experimental results show that the proposed technique achieves the best or at least equivalent performance among compared techniques, GENIA, MESH, UMLS, and combinations of these three resources in F-measure. Conclusions The results imply that the performance of dictionary-based extraction techniques is largely influenced by information resources used to build the dictionary. In addition, the edit distance algorithm shows steady performance with three different dictionaries in precision whereas the context-only technique achieves a high-end performance with three difference dictionaries in recall. PMID:26043907

Developing a hybrid dictionary-based bio-entity recognition technique.

Science.gov (United States)

Song, Min; Yu, Hwanjo; Han, Wook-Shin

2015-01-01

Bio-entity extraction is a pivotal component for information extraction from biomedical literature. The dictionary-based bio-entity extraction is the first generation of Named Entity Recognition (NER) techniques. This paper presents a hybrid dictionary-based bio-entity extraction technique. The approach expands the bio-entity dictionary by combining different data sources and improves the recall rate through the shortest path edit distance algorithm. In addition, the proposed technique adopts text mining techniques in the merging stage of similar entities such as Part of Speech (POS) expansion, stemming, and the exploitation of the contextual cues to further improve the performance. The experimental results show that the proposed technique achieves the best or at least equivalent performance among compared techniques, GENIA, MESH, UMLS, and combinations of these three resources in F-measure. The results imply that the performance of dictionary-based extraction techniques is largely influenced by information resources used to build the dictionary. In addition, the edit distance algorithm shows steady performance with three different dictionaries in precision whereas the context-only technique achieves a high-end performance with three difference dictionaries in recall.

Combined amplification and hybridization techniques for genome scanning in vegetatively propagated crops

Energy Technology Data Exchange (ETDEWEB)

Kahl, G; Ramser, J; Terauchi, R [Biocentre, University of Frankfurt, Frankfurt am Main (Germany); Lopez-Peralta, C [IRGP, Colegio de Postgraduados, Montecillo, Edo. de Mexico, Texcoco (Mexico); Asemota, H N [Biotechnology Centre, University of the West Indies, Mona, Kingston (Jamaica); Weising, K [School of Biological Sciences, University of Auckland, Auckland (New Zealand)

1998-10-01

A combination of PCR- and hybridization-based genome scanning techniques and sequence comparisons between non-coding chloroplast DNA flanking tRNA genes has been employed to screen Dioscorea species for intra- and interspecific genetic diversity. This methodology detected extensive polymorphisms within Dioscorea bulbifera L., and revealed taxonomic and phylogenetic relationships among cultivated Guinea yams varieties and their potential wild progenitors. Finally, screening of yam germplasm grown in Jamaica permitted reliable discrimination between all major cultivars. Genome scanning by micro satellite-primed PCR (MP-PCR) and random amplified polymorphic DNA (RAPD) analysis in combination with the novel random amplified micro satellite polymorphisms (RAMPO) hybridization technique has shown high potential for the genetic analysis of yams, and holds promise for other vegetatively propagated orphan crops. (author) 46 refs, 3 figs, 3 tabs

Improved Image Encryption for Real-Time Application over Wireless Communication Networks using Hybrid Cryptography Technique

Directory of Open Access Journals (Sweden)

Kazeem B. Adedeji

2016-12-01

Full Text Available Advances in communication networks have enabled organization to send confidential data such as digital images over wireless networks. However, the broadcast nature of wireless communication channel has made it vulnerable to attack from eavesdroppers. We have developed a hybrid cryptography technique, and we present its application to digital images as a means of improving the security of digital image for transmission over wireless communication networks. The hybrid technique uses a combination of a symmetric (Data Encryption Standard and asymmetric (Rivest Shamir Adleman cryptographic algorithms to secure data to be transmitted between different nodes of a wireless network. Three different image samples of type jpeg, png and jpg were tested using this technique. The results obtained showed that the hybrid system encrypt the images with minimal simulation time, and high throughput. More importantly, there is no relation or information between the original images and their encrypted form, according to Shannon’s definition of perfect security, thereby making the system much more secure.

Hybrid Action Systems

DEFF Research Database (Denmark)

Rönnkö, M.; Ravn, Anders Peter; Sere, K.

2003-01-01

In this paper we investigate the use of action systems with differential actions in the specifcation of hybrid systems. As the main contribution we generalize the definition of a differential action, allowing the use of arbitrary relations over model variables and their time......-derivatives in modelling continuous-time dynamics. The generalized differential action has an intuitively appealing predicate transformer semantics, which we show to be both conjunctive and monotonic. In addition, we show that differential actions blend smoothly with conventional actions in action systems, even under...... parallel composition. Moreover, as the strength of the action system formalism is the support for stepwise development by refinement, we investigate refinement involving a differential action. We show that, due to the predicate transformer semantics, standard action refinement techniques apply also...

An effective technique for the software requirements analysis of NPP safety-critical systems, based on software inspection, requirements traceability, and formal specification

International Nuclear Information System (INIS)

Koo, Seo Ryong; Seong, Poong Hyun; Yoo, Junbeom; Cha, Sung Deok; Yoo, Yeong Jae

2005-01-01

A thorough requirements analysis is indispensable for developing and implementing safety-critical software systems such as nuclear power plant (NPP) software systems because a single error in the requirements can generate serious software faults. However, it is very difficult to completely analyze system requirements. In this paper, an effective technique for the software requirements analysis is suggested. For requirements verification and validation (V and V) tasks, our technique uses software inspection, requirement traceability, and formal specification with structural decomposition. Software inspection and requirements traceability analysis are widely considered the most effective software V and V methods. Although formal methods are also considered an effective V and V activity, they are difficult to use properly in the nuclear fields as well as in other fields because of their mathematical nature. In this work, we propose an integrated environment (IE) approach for requirements, which is an integrated approach that enables easy inspection by combining requirement traceability and effective use of a formal method. The paper also introduces computer-aided tools for supporting IE approach for requirements. Called the nuclear software inspection support and requirements traceability (NuSISRT), the tool incorporates software inspection, requirement traceability, and formal specification capabilities. We designed the NuSISRT to partially automate software inspection and analysis of requirement traceability. In addition, for the formal specification and analysis, we used the formal requirements specification and analysis tool for nuclear engineering (NuSRS)

Safety Assessment of Two Hybrid Instrumentation Techniques in a Dental Student Endodontic Clinic: A Retrospective Study.

Science.gov (United States)

Coelho, Marcelo Santos; Card, Steven John; Tawil, Peter Zahi

2017-03-01

The aim of this study was to retrospectively assess the safety potential of a hybrid technique combining nickel-titanium (NiTi) reciprocating and rotary instruments by third- and fourth-year dental students in the predoctoral endodontics clinic at one U.S. dental school. For the study, 3,194 root canal treatments performed by 317 dental students from 2012 through 2015 were evaluated for incidence of ledge creation and instrument separation. The hybrid reciprocating and rotary technique (RRT) consisted of a glide path creation with stainless steel hand files up to size 15/02, a crown down preparation with a NiTi reciprocating instrument, and an apical preparation with NiTi rotary instruments. The control was a traditional rotary and hand technique (RHT) that consisted of the same glide path procedure followed by a crown down preparation with NiTi rotary instruments and an apical preparation with NiTi hand instruments. The results showed that the RHT technique presented a rate of ledge creation of 1.4% per root and the RRT technique was 0.5% per root (protary technique for root canal instrumentation by these dental students provided good safety. This hybrid technique offered a low rate of ledge creation along with no NiTi instrument separation.

Novel Hybrid Scheduling Technique for Sensor Nodes with Mixed Criticality Tasks

Directory of Open Access Journals (Sweden)

Mihai-Victor Micea

2017-06-01

Full Text Available Sensor networks become increasingly a key technology for complex control applications. Their potential use in safety- and time-critical domains has raised the need for task scheduling mechanisms specially adapted to sensor node specific requirements, often materialized in predictable jitter-less execution of tasks characterized by different criticality levels. This paper offers an efficient scheduling solution, named Hybrid Hard Real-Time Scheduling (H2RTS, which combines a static, clock driven method with a dynamic, event driven scheduling technique, in order to provide high execution predictability, while keeping a high node Central Processing Unit (CPU utilization factor. From the detailed, integrated schedulability analysis of the H2RTS, a set of sufficiency tests are introduced and demonstrated based on the processor demand and linear upper bound metrics. The performance and correct behavior of the proposed hybrid scheduling technique have been extensively evaluated and validated both on a simulator and on a sensor mote equipped with ARM7 microcontroller.

Novel Hybrid Scheduling Technique for Sensor Nodes with Mixed Criticality Tasks.

Science.gov (United States)

Micea, Mihai-Victor; Stangaciu, Cristina-Sorina; Stangaciu, Valentin; Curiac, Daniel-Ioan

2017-06-26

Sensor networks become increasingly a key technology for complex control applications. Their potential use in safety- and time-critical domains has raised the need for task scheduling mechanisms specially adapted to sensor node specific requirements, often materialized in predictable jitter-less execution of tasks characterized by different criticality levels. This paper offers an efficient scheduling solution, named Hybrid Hard Real-Time Scheduling (H²RTS), which combines a static, clock driven method with a dynamic, event driven scheduling technique, in order to provide high execution predictability, while keeping a high node Central Processing Unit (CPU) utilization factor. From the detailed, integrated schedulability analysis of the H²RTS, a set of sufficiency tests are introduced and demonstrated based on the processor demand and linear upper bound metrics. The performance and correct behavior of the proposed hybrid scheduling technique have been extensively evaluated and validated both on a simulator and on a sensor mote equipped with ARM7 microcontroller.

Formal Methods for Life-Critical Software

Science.gov (United States)

Butler, Ricky W.; Johnson, Sally C.

1993-01-01

The use of computer software in life-critical applications, such as for civil air transports, demands the use of rigorous formal mathematical verification procedures. This paper demonstrates how to apply formal methods to the development and verification of software by leading the reader step-by-step through requirements analysis, design, implementation, and verification of an electronic phone book application. The current maturity and limitations of formal methods tools and techniques are then discussed, and a number of examples of the successful use of formal methods by industry are cited.

A Survey of Formal Methods in Software Development

DEFF Research Database (Denmark)

Bjørner, Dines

2012-01-01

The use of formal methods and formal techniques in industry is steadily growing. In this survey we shall characterise what we mean by software development and by a formal method; briefly overview a history of formal specification languages - some of which are: VDM (Vienna Development Method, 1974...... need for multi-language formalisation (Petri Nets, MSC, StateChart, Temporal Logics); the sociology of university and industry acceptance of formal methods; the inevitability of the use of formal software development methods; while referring to seminal monographs and textbooks on formal methods....

Development of a hybrid strength training technique for paretic lower-limb muscles

NARCIS (Netherlands)

Bennett, T. L.; Glaser, R. M.; Janssen, T. W J; Couch, W. P.; Herr, C. J.; Almeyda, J. W.; Petrofsky, S. H.; Akuthota, P.

1996-01-01

A hybrid resistance exercise technique for strength training of patients with lower-limb paresis was developed. It consists of electrical stimulation-induced contractions (ESIC) superimposed on voluntary contractions to increase recruitment of motor units and the functional load capability of

Supersonic impinging jet noise reduction using a hybrid control technique

Science.gov (United States)

Wiley, Alex; Kumar, Rajan

2015-07-01

Control of the highly resonant flowfield associated with supersonic impinging jet has been experimentally investigated. Measurements were made in the supersonic impinging jet facility at the Florida State University for a Mach 1.5 ideally expanded jet. Measurements included unsteady pressures on a surface plate near the nozzle exit, acoustics in the nearfield and beneath the impingement plane, and velocity field using particle image velocimetry. Both passive control using porous surface and active control with high momentum microjet injection are effective in reducing nearfield noise and flow unsteadiness over a range of geometrical parameters; however, the type of noise reduction achieved by the two techniques is different. The passive control reduces broadband noise whereas microjet injection attenuates high amplitude impinging tones. The hybrid control, a combination of two control methods, reduces both broadband and high amplitude impinging tones and surprisingly its effectiveness is more that the additive effect of the two control techniques. The flow field measurements show that with hybrid control the impinging jet is stabilized and the turbulence quantities such as streamwise turbulence intensity, transverse turbulence intensity and turbulent shear stress are significantly reduced.

Formal methods in software development: A road less travelled

Directory of Open Access Journals (Sweden)

John A van der Poll

2010-08-01

Full Text Available An integration of traditional verification techniques and formal specifications in software engineering is presented. Advocates of such techniques claim that mathematical formalisms allow them to produce quality, verifiably correct, or at least highly dependable software and that the testing and maintenance phases are shortened. Critics on the other hand maintain that software formalisms are hard to master, tedious to use and not well suited for the fast turnaround times demanded by industry. In this paper some popular formalisms and the advantages of using these during the early phases of the software development life cycle are presented. Employing the Floyd-Hoare verification principles during the formal specification phase facilitates reasoning about the properties of a specification. Some observations that may help to alleviate the formal-methods controversy are established and a number of formal methods successes is presented. Possible conditions for an increased acceptance of formalisms in oftware development are discussed.

Disease processes as hybrid dynamical systems

Directory of Open Access Journals (Sweden)

Pietro Liò

2012-08-01

Full Text Available We investigate the use of hybrid techniques in complex processes of infectious diseases. Since predictive disease models in biomedicine require a multiscale approach for understanding the molecule-cell-tissue-organ-body interactions, heterogeneous methodologies are often employed for describing the different biological scales. Hybrid models provide effective means for complex disease modelling where the action and dosage of a drug or a therapy could be meaningfully investigated: the infection dynamics can be classically described in a continuous fashion, while the scheduling of multiple treatment discretely. We define an algebraic language for specifying general disease processes and multiple treatments, from which a semantics in terms of hybrid dynamical system can be derived. Then, the application of control-theoretic tools is proposed in order to compute the optimal scheduling of multiple therapies. The potentialities of our approach are shown in the case study of the SIR epidemic model and we discuss its applicability on osteomyelitis, a bacterial infection affecting the bone remodelling system in a specific and multiscale manner. We report that formal languages are helpful in giving a general homogeneous formulation for the different scales involved in a multiscale disease process; and that the combination of hybrid modelling and control theory provides solid grounds for computational medicine.

Fluid Petri Nets and hybrid model-checking: a comparative case study

International Nuclear Information System (INIS)

Gribaudo, M.; Horvath, A.; Bobbio, A.; Tronci, E.; Ciancamerla, E.; Minichino, M.

2003-01-01

The modeling and analysis of hybrid systems is a recent and challenging research area which is actually dominated by two main lines: a functional analysis based on the description of the system in terms of discrete state (hybrid) automata (whose goal is to ascertain conformity and reachability properties), and a stochastic analysis (whose aim is to provide performance and dependability measures). This paper investigates a unifying view between formal methods and stochastic methods by proposing an analysis methodology of hybrid systems based on Fluid Petri Nets (FPNs). FPNs can be analyzed directly using appropriate tools. Our paper shows that the same FPN model can be fed to different functional analyzers for model checking. In order to extensively explore the capability of the technique, we have converted the original FPN into languages for discrete as well as hybrid as well as stochastic model checkers. In this way, a first comparison among the modeling power of well known tools can be carried out. Our approach is illustrated by means of a 'real world' hybrid system: the temperature control system of a co-generative plant

Hybrid optical CDMA-FSO communications network under spatially correlated gamma-gamma scintillation.

Science.gov (United States)

Jurado-Navas, Antonio; Raddo, Thiago R; Garrido-Balsells, José María; Borges, Ben-Hur V; Olmos, Juan José Vegas; Monroy, Idelfonso Tafur

2016-07-25

In this paper, we propose a new hybrid network solution based on asynchronous optical code-division multiple-access (OCDMA) and free-space optical (FSO) technologies for last-mile access networks, where fiber deployment is impractical. The architecture of the proposed hybrid OCDMA-FSO network is thoroughly described. The users access the network in a fully asynchronous manner by means of assigned fast frequency hopping (FFH)-based codes. In the FSO receiver, an equal gain-combining technique is employed along with intensity modulation and direct detection. New analytical formalisms for evaluating the average bit error rate (ABER) performance are also proposed. These formalisms, based on the spatially correlated gamma-gamma statistical model, are derived considering three distinct scenarios, namely, uncorrelated, totally correlated, and partially correlated channels. Numerical results show that users can successfully achieve error-free ABER levels for the three scenarios considered as long as forward error correction (FEC) algorithms are employed. Therefore, OCDMA-FSO networks can be a prospective alternative to deliver high-speed communication services to access networks with deficient fiber infrastructure.

New Technologies and Learning Environments: A Perspective from Formal and Non-Formal Education in Baja California, Mexico

Science.gov (United States)

Zamora, Julieta Lopez; Reynaga, Francisco Javier Arriaga

2010-01-01

This paper presents results of two research works, the first approaches non-formal education and the second addresses formal education. In both studies in-depth interview techniques were used. There were some points of convergence between them on aspects such as the implementation of learning environments and the integration of ICT. The interview…

Formal monkey linguistics : The debate

NARCIS (Netherlands)

Schlenker, Philippe; Chemla, Emmanuel; Schel, Anne M.|info:eu-repo/dai/nl/413333450; Fuller, James; Gautier, Jean Pierre; Kuhn, Jeremy; Veselinović, Dunja; Arnold, Kate; Cäsar, Cristiane; Keenan, Sumir; Lemasson, Alban; Ouattara, Karim; Ryder, Robin; Zuberbühler, Klaus

2016-01-01

We explain why general techniques from formal linguistics can and should be applied to the analysis of monkey communication - in the areas of syntax and especially semantics. An informed look at our recent proposals shows that such techniques needn't rely excessively on categories of human language:

First-Order Hybrid Logic: Introduction and Survey

DEFF Research Database (Denmark)

Braüner, Torben

2014-01-01

often wants to build up a series of assertions about what happens at a particular instant, and standard modal formalisms do not allow this. What is less obvious is that the route hybrid logic takes to overcome this problem often actually improves the behaviour of the underlying modal formalism...

A Standalone PV System with a Hybrid P&O MPPT Optimization Technique

Directory of Open Access Journals (Sweden)

S. Hota

2017-12-01

Full Text Available In this paper a maximum power point tracking (MPPT design for a photovoltaic (PV system using a hybrid optimization technique is proposed. For maximum power transfer, maximum harvestable power from a PV cell in a dynamically changing surrounding should be known. The proposed technique is compared with the conventional Perturb and Observe (P&O technique. A comparative analysis of power-voltage and current-voltage characteristics of a PV cell with and without the MPPT module when connected to the grid was performed in SIMULINK, to demonstrate the increment in the efficiency of the PV module after using the MPPT module.

Constraint satisfaction problems CSP formalisms and techniques

CERN Document Server

Ghedira, Khaled

2013-01-01

A Constraint Satisfaction Problem (CSP) consists of a set of variables, a domain of values for each variable and a set of constraints. The objective is to assign a value for each variable such that all constraints are satisfied. CSPs continue to receive increased attention because of both their high complexity and their omnipresence in academic, industrial and even real-life problems. This is why they are the subject of intense research in both artificial intelligence and operations research. This book introduces the classic CSP and details several extensions/improvements of both formalisms a

An approach of requirements tracing in formal refinement

DEFF Research Database (Denmark)

Jastram, Michael; Hallerstede, Stefan; Leuschel, Michael

2010-01-01

Formal modeling of computing systems yields models that are intended to be correct with respect to the requirements that have been formalized. The complexity of typical computing systems can be addressed by formal refinement introducing all the necessary details piecemeal. We report on preliminar...... changes, making use of corresponding techniques already built into the Event-B method....

Electricity market price spike analysis by a hybrid data model and feature selection technique

International Nuclear Information System (INIS)

Amjady, Nima; Keynia, Farshid

2010-01-01

In a competitive electricity market, energy price forecasting is an important activity for both suppliers and consumers. For this reason, many techniques have been proposed to predict electricity market prices in the recent years. However, electricity price is a complex volatile signal owning many spikes. Most of electricity price forecast techniques focus on the normal price prediction, while price spike forecast is a different and more complex prediction process. Price spike forecasting has two main aspects: prediction of price spike occurrence and value. In this paper, a novel technique for price spike occurrence prediction is presented composed of a new hybrid data model, a novel feature selection technique and an efficient forecast engine. The hybrid data model includes both wavelet and time domain variables as well as calendar indicators, comprising a large candidate input set. The set is refined by the proposed feature selection technique evaluating both relevancy and redundancy of the candidate inputs. The forecast engine is a probabilistic neural network, which are fed by the selected candidate inputs of the feature selection technique and predict price spike occurrence. The efficiency of the whole proposed method for price spike occurrence forecasting is evaluated by means of real data from the Queensland and PJM electricity markets. (author)

A Hybrid Islanding Detection Technique Using Average Rate of Voltage Change and Real Power Shift

DEFF Research Database (Denmark)

Mahat, Pukar; Chen, Zhe; Bak-Jensen, Birgitte

2009-01-01

The mainly used islanding detection techniques may be classified as active and passive techniques. Passive techniques don't perturb the system but they have larger nondetection znes, whereas active techniques have smaller nondetection zones but they perturb the system. In this paper, a new hybrid...... technique is proposed to solve this problem. An average rate of voltage change (passive technique) has been used to initiate a real power shift (active technique), which changes the eal power of distributed generation (DG), when the passive technique cannot have a clear discrimination between islanding...

Helicity formalism and spin effects

International Nuclear Information System (INIS)

Anselmino, M.; Caruso, F.; Piovano, U.

1990-01-01

The helicity formalism and the technique to compute amplitudes for interaction processes involving leptons, quarks, photons and gluons are reviewed. Explicit calculations and examples of exploitation of symmetry properties are shown. The formalism is then applied to the discussion of several hadronic processes and spin effects: the experimental data, when related to the properties of the elementary constituent interactions, show many not understood features. Also the nucleon spin problem is briefly reviewed. (author)

Cleaning capacity of hybrid instrumentation technique using reamer with alternating cutting edges system files: Histological analysis

Directory of Open Access Journals (Sweden)

Emilio Carlos Sponchiado Junior

2014-01-01

Full Text Available Aim: The aim of the following study is to evaluate the cleaning capacity of a hybrid instrumentation technique using Reamer with Alternating Cutting Edges (RaCe system files in the apical third of mesial roots of mandibular molars. Materials and Methods: Twenty teeth were selected and separated into two groups (n = 20 according to instrumentation technique as follows: BioRaCe - chemomechanical preparation with K-type files #10 and #15; and files BioRaCe BR0, BR1, BR2, BR3, and BR4; HybTec - hybrid instrumentation technique with K-type files #10 and #15 in the working length, #20 at 2 mm, #25 at 3 mm, cervical preparation with Largo burs #1 and #2; apical preparation with K-type files #15, #20, and #25 and RaCe files #25.04 and #30.04. The root canals were irrigated with 1 ml of 2.5% sodium hypochlorite at each change of instrument. The specimens were histologically processed and photographed under light optical microscope. The images were inserted onto an integration grid to count the amount of debris present in the root canal. Results: BioRaCe presented the highest percentage of debris in the apical third, however, with no statistically significant difference for HybTec (P > 0.05. Conclusions: The hybrid technique presented similar cleaning capacity as the technique recommended by the manufacturer.

Hybrid Monte Carlo algorithm with fat link fermion actions

International Nuclear Information System (INIS)

Kamleh, Waseem; Leinweber, Derek B.; Williams, Anthony G.

2004-01-01

The use of APE smearing or other blocking techniques in lattice fermion actions can provide many advantages. There are many variants of these fat link actions in lattice QCD currently, such as flat link irrelevant clover (FLIC) fermions. The FLIC fermion formalism makes use of the APE blocking technique in combination with a projection of the blocked links back into the special unitary group. This reunitarization is often performed using an iterative maximization of a gauge invariant measure. This technique is not differentiable with respect to the gauge field and thus prevents the use of standard Hybrid Monte Carlo simulation algorithms. The use of an alternative projection technique circumvents this difficulty and allows the simulation of dynamical fat link fermions with standard HMC and its variants. The necessary equations of motion for FLIC fermions are derived, and some initial simulation results are presented. The technique is more general however, and is straightforwardly applicable to other smearing techniques or fat link actions

Towards a formal taxonomy of hybrid uncertainty representations

Energy Technology Data Exchange (ETDEWEB)

Joslyn, C.; Rocha, L.

1997-02-01

Recent years have seen a proliferation of methods in addition to probability theory to represent information and uncertainty, including fuzzy sets and systems, fuzzy measures, rough sets, random sets, possibility distributions, imprecise probabilities, etc. We can identify these fields collectively as General Information Theory. The components of GIT represent information according to different axiomatic bases, and are thus capable of capturing different semantic aspects of uncertainty. Traditionally, these semantic criteria include such categories as fuzziness, vagueness, nonspecificity, conflict, and randomness. So it is clear that there is a pressing need for the GIT community to synthesize these methods, searching out larger formal frameworks within which to place these various components with respect to each other. Ideally, syntactic (mathematical) generalization can both aid and be aided by the semantic analysis available in terms of the conceptual categories outlined above. In this paper we present some preliminary ideas about how to formally relate various uncertainty representations together in a taxonomic lattice, capturing both syntactic and semantic generalization. Some partial and provisional results are shown. Assume a simple finite universe of discourse {Omega} = (a, b, c). We want to describe a situation in which we ask a question of the sort {open_quotes}what is the value of a variable x which takes values in {Omega}?{close_quotes}. When there is no uncertainty, we have a single alternative, say x = a. In logical terms, we would say that the proposition p: {open_quotes}the value of x is a{close_quotes} is TRUE. Our approach begins with two primitive concepts which can change our knowledge of x, each of which represents a different form of uncertainty, nonspecificity and fuxxiness.

An Adaptive Hybrid Multiprocessor technique for bioinformatics sequence alignment

KAUST Repository

Bonny, Talal

2012-07-28

Sequence alignment algorithms such as the Smith-Waterman algorithm are among the most important applications in the development of bioinformatics. Sequence alignment algorithms must process large amounts of data which may take a long time. Here, we introduce our Adaptive Hybrid Multiprocessor technique to accelerate the implementation of the Smith-Waterman algorithm. Our technique utilizes both the graphics processing unit (GPU) and the central processing unit (CPU). It adapts to the implementation according to the number of CPUs given as input by efficiently distributing the workload between the processing units. Using existing resources (GPU and CPU) in an efficient way is a novel approach. The peak performance achieved for the platforms GPU + CPU, GPU + 2CPUs, and GPU + 3CPUs is 10.4 GCUPS, 13.7 GCUPS, and 18.6 GCUPS, respectively (with the query length of 511 amino acid). © 2010 IEEE.

What will be eventually true of polymomial hybrid automata

DEFF Research Database (Denmark)

Fränzle, Martin

2001-01-01

Hybrid automata have been introduced in both control engineering and computer science as a formal model for the dynamics of hybrid discrete-continuous systems. While computability issues concerning safety properties have been extensively studied, liveness properties have remained largely uninvest......Hybrid automata have been introduced in both control engineering and computer science as a formal model for the dynamics of hybrid discrete-continuous systems. While computability issues concerning safety properties have been extensively studied, liveness properties have remained largely...... uninvestigated. In this article, we investigate decidability of state recurrence and of progress properties. First, we show that state recurrence and progress are in general undecidable for polynomial hybrid automata. Then, we demonstrate that they are closely related for hybrid automata subject to a simple...... model of noise, even though these automata are infinite-state systems. Based on this, we augment a semi-decision procedure for recurrence with a semi-decision method for length-boundedness of paths in such a way that we obtain an automatic verification method for progress properties of linear...

Concepciones acerca de la maternidad en la educación formal y no formal

Directory of Open Access Journals (Sweden)

Alvarado Calderón, Kathia

2005-06-01

Full Text Available Este artículo presenta algunos resultados de la investigación desarrollada en el Instituto de Investigación en Educación (INIE, bajo el nombre "Construcción del concepto de maternidad en la educación formal y no formal". Utilizando un enfoque cualitativo de investigación, recurrimos a las técnicas de elaboración de dibujos, entrevistas y grupo focal como recursos para la recolección de la información. De esta manera, podemos acercarnos a las concepciones de la maternidad que utilizan los participantes de las diferentes instancias educativas (formal y no formal con quienes se trabajó. This article presents some results the research developed in the Instituto de Investigación en Educación (INIE, named "Construcción del concepto de maternidad en la educación formal y no formal". It begins with a theoretical analysis about social conceptions regarding motherhood in the occidental societies. Among the techniques for gathering information were thematic drawing, interview and focus group, using a qualitative approach research method. This is followed by a brief summary of main findings. The article concludes with a proposal of future working lines for the deconstruction of the motherhood concept in formal and informal education contexts.

Adaptation of Hybrid FSO/RF Communication System Using Puncturing Technique

Directory of Open Access Journals (Sweden)

M. N. Khan

2016-12-01

Full Text Available Spectrum of radio frequency (RF communications is limited and expensive to install new applications. Free space optical (FSO communication is a viable technology which offers enormous bandwidth, license free installation, inexpensive deployment and error prone links. The FSO links degrade significantly due to the varying atmospheric and weather conditions (fog, cloud, snow, haze and combination of these. We propose a hybrid FSO/RF communication system which adapts the varying nature of atmosphere and weather. For the adaption of varying atmosphere and weather scenarios, we develop a novel optimization algorithm. The proposed algorithm is based on the well-known puncturing technique. We provide an extrinsic information transfer (EXIT chart for the binary and quaternary mapping scheme for the proposed communication system. We simulate the proposed algorithm for the hybrid communication system and analyze the system performance. The proposed algorithm is computationally less expensive and provide better performance gains over varying atmosphere and weather conditions. The algorithm is suitable for fast speed applications.

A hybrid Pade-Galerkin technique for differential equations

Science.gov (United States)

Geer, James F.; Andersen, Carl M.

1993-01-01

A three-step hybrid analysis technique, which successively uses the regular perturbation expansion method, the Pade expansion method, and then a Galerkin approximation, is presented and applied to some model boundary value problems. In the first step of the method, the regular perturbation method is used to construct an approximation to the solution in the form of a finite power series in a small parameter epsilon associated with the problem. In the second step of the method, the series approximation obtained in step one is used to construct a Pade approximation in the form of a rational function in the parameter epsilon. In the third step, the various powers of epsilon which appear in the Pade approximation are replaced by new (unknown) parameters (delta(sub j)). These new parameters are determined by requiring that the residual formed by substituting the new approximation into the governing differential equation is orthogonal to each of the perturbation coordinate functions used in step one. The technique is applied to model problems involving ordinary or partial differential equations. In general, the technique appears to provide good approximations to the solution even when the perturbation and Pade approximations fail to do so. The method is discussed and topics for future investigations are indicated.

A Hybrid Soft Computing Approach for Subset Problems

Directory of Open Access Journals (Sweden)

Broderick Crawford

2013-01-01

Full Text Available Subset problems (set partitioning, packing, and covering are formal models for many practical optimization problems. A set partitioning problem determines how the items in one set (S can be partitioned into smaller subsets. All items in S must be contained in one and only one partition. Related problems are set packing (all items must be contained in zero or one partitions and set covering (all items must be contained in at least one partition. Here, we present a hybrid solver based on ant colony optimization (ACO combined with arc consistency for solving this kind of problems. ACO is a swarm intelligence metaheuristic inspired on ants behavior when they search for food. It allows to solve complex combinatorial problems for which traditional mathematical techniques may fail. By other side, in constraint programming, the solving process of Constraint Satisfaction Problems can dramatically reduce the search space by means of arc consistency enforcing constraint consistencies either prior to or during search. Our hybrid approach was tested with set covering and set partitioning dataset benchmarks. It was observed that the performance of ACO had been improved embedding this filtering technique in its constructive phase.

Proximity effect in normal metal-multiband superconductor hybrid structures

NARCIS (Netherlands)

Brinkman, Alexander; Golubov, Alexandre Avraamovitch; Kupriyanov, M. Yu

2004-01-01

A theory of the proximity effect in normal metal¿multiband superconductor hybrid structures is formulated within the quasiclassical Green's function formalism. The quasiclassical boundary conditions for multiband hybrid structures are derived in the dirty limit. It is shown that the existence of

Rapid Prototyping of Formally Modelled Distributed Systems

OpenAIRE

Buchs, Didier; Buffo, Mathieu; Titsworth, Frances M.

1999-01-01

This paper presents various kinds of prototypes, used in the prototyping of formally modelled distributed systems. It presents the notions of prototyping techniques and prototype evolution, and shows how to relate them to the software life-cycle. It is illustrated through the use of the formal modelling language for distributed systems CO-OPN/2.

Construction of vertex operators using operator formalism techniques

International Nuclear Information System (INIS)

Gato, B.; Massachusetts Inst. of Tech., Cambridge

1989-01-01

We derive vertex operators in oscillator form as an application of the conserved charges method developed by Vafa for the operator formalism in higher genus Riemann surfaces. This construction proves to be clear, direct and valid for the bosonic and fermionic strings as wells as for twisted strings on orbifolds. We discuss the method and construct vertex operators for the bosonic string moving on Z N orbifolds and for the fermionic string in the NSR formulation. (orig.)

Anatomic and Pathologic Variability During Radiotherapy for a Hybrid Active Breath-Hold Gating Technique

International Nuclear Information System (INIS)

Glide-Hurst, Carri K.; Gopan, Ellen; Hugo, Geoffrey D.

2010-01-01

Purpose: To evaluate intra- and interfraction variability of tumor and lung volume and position using a hybrid active breath-hold gating technique. Methods and Materials: A total of 159 repeat normal inspiration active breath-hold CTs were acquired weekly during radiotherapy for 9 lung cancer patients (12-21 scans per patient). A physician delineated the gross tumor volume (GTV), lungs, and spinal cord on the first breath-hold CT, and contours were propagated semiautomatically. Intra- and interfraction variability of tumor and lung position and volume were evaluated. Tumor centroid and border variability were quantified. Results: On average, intrafraction variability of lung and GTV centroid position was 0.1). Increases in free-breathing tidal volume were associated with increases in breath-hold ipsilateral lung volume (p < 0.05). Conclusions: The breath-hold technique was reproducible within 2 mm during each fraction. Interfraction variability of GTV position and shape was substantial because of tumor volume and breath-hold lung volume change during therapy. These results support the feasibility of a hybrid breath-hold gating technique and suggest that online image guidance would be beneficial.

ProTaper rotary instrument fracture during root canal preparation: a comparison between rotary and hybrid techniques.

Science.gov (United States)

Farid, Huma; Khan, Farhan Raza; Rahman, Munawar

2013-03-01

This study aimed to compare the frequency of ProTaper rotary instrument fracture with rotary (conventional) and hybrid (rotary and hand files) canal preparation techniques. Secondary objectives were to determine whether there was an association of ProTaper file fracture with the canal curvature and to compare the mean time required for canal preparation in the two techniques. An in vitro experiment was conducted on 216 buccal canals of extracted maxillary and mandibular first molars. After creating an access cavity and a glide path for each canal, a periapical radiograph was taken and the canal curvature was measured with Schneider's technique. The canals were then randomly divided into Group A (rotary technique) and Group B (hybrid technique). The length of ProTaper files were measured before and after each canal preparation. Time taken for each canal preparation was recorded. A total of seven ProTaper files fractured in Group A (P=0.014) in canals with a curvature >25 degrees (PProTaper rotary files, although time consuming, was safer in canals having a curvature greater than 25 degrees.

Modelling and Verifying Communication Failure of Hybrid Systems in HCSP

DEFF Research Database (Denmark)

Wang, Shuling; Nielson, Flemming; Nielson, Hanne Riis

2016-01-01

Hybrid systems are dynamic systems with interacting discrete computation and continuous physical processes. They have become ubiquitous in our daily life, e.g. automotive, aerospace and medical systems, and in particular, many of them are safety-critical. For a safety-critical hybrid system......, in the presence of communication failure, the expected control from the controller will get lost and as a consequence the physical process cannot behave as expected. In this paper, we mainly consider the communication failure caused by the non-engagement of one party in communication action, i.......e. the communication itself fails to occur. To address this issue, this paper proposes a formal framework by extending HCSP, a formal modeling language for hybrid systems, for modeling and verifying hybrid systems in the absence of receiving messages due to communication failure. We present two inference systems...

A Synthesized Framework for Formal Verification of Computing Systems

Directory of Open Access Journals (Sweden)

Nikola Bogunovic

2003-12-01

Full Text Available Design process of computing systems gradually evolved to a level that encompasses formal verification techniques. However, the integration of formal verification techniques into a methodical design procedure has many inherent miscomprehensions and problems. The paper explicates the discrepancy between the real system implementation and the abstracted model that is actually used in the formal verification procedure. Particular attention is paid to the seamless integration of all phases of the verification procedure that encompasses definition of the specification language and denotation and execution of conformance relation between the abstracted model and its intended behavior. The concealed obstacles are exposed, computationally expensive steps identified and possible improvements proposed.

Bio-Inspired Genetic Algorithms with Formalized Crossover Operators for Robotic Applications.

Science.gov (United States)

Zhang, Jie; Kang, Man; Li, Xiaojuan; Liu, Geng-Yang

2017-01-01

Genetic algorithms are widely adopted to solve optimization problems in robotic applications. In such safety-critical systems, it is vitally important to formally prove the correctness when genetic algorithms are applied. This paper focuses on formal modeling of crossover operations that are one of most important operations in genetic algorithms. Specially, we for the first time formalize crossover operations with higher-order logic based on HOL4 that is easy to be deployed with its user-friendly programing environment. With correctness-guaranteed formalized crossover operations, we can safely apply them in robotic applications. We implement our technique to solve a path planning problem using a genetic algorithm with our formalized crossover operations, and the results show the effectiveness of our technique.

Homogenization via formal multiscale asymptotics and volume averaging: How do the two techniques compare?

KAUST Repository

Davit, Yohan

2013-12-01

A wide variety of techniques have been developed to homogenize transport equations in multiscale and multiphase systems. This has yielded a rich and diverse field, but has also resulted in the emergence of isolated scientific communities and disconnected bodies of literature. Here, our goal is to bridge the gap between formal multiscale asymptotics and the volume averaging theory. We illustrate the methodologies via a simple example application describing a parabolic transport problem and, in so doing, compare their respective advantages/disadvantages from a practical point of view. This paper is also intended as a pedagogical guide and may be viewed as a tutorial for graduate students as we provide historical context, detail subtle points with great care, and reference many fundamental works. © 2013 Elsevier Ltd.

Formal methods applied to industrial complex systems implementation of the B method

CERN Document Server

Boulanger, Jean-Louis

2014-01-01

This book presents real-world examples of formal techniques in an industrial context. It covers formal methods such as SCADE and/or the B Method, in various fields such as railways, aeronautics, and the automotive industry. The purpose of this book is to present a summary of experience on the use of "formal methods" (based on formal techniques such as proof, abstract interpretation and model-checking) in industrial examples of complex systems, based on the experience of people currently involved in the creation and assessment of safety critical system software. The involvement of people from

Hybrid optical CDMA-FSO communications network under spatially correlated gamma-gamma scintillation

DEFF Research Database (Denmark)

Jurado-Navas, Antonio; Raddo, Thiago R.; Garrido-Balsells, José María

2016-01-01

In this paper, we propose a new hybrid network solution based on asynchronous optical code-division multiple-access (OCDMA) and free-space optical (FSO) technologies for last-mile access networks, where fiber deployment is impractical. The architecture of the proposed hybrid OCDMA-FSO network...... is thoroughly described. The users access the network in a fully asynchronous manner by means of assigned fast frequency hopping (FFH)-based codes. In the FSO receiver, an equal gain-combining technique is employed along with intensity modulation and direct detection. New analytical formalisms for evaluating...... can successfully achieve error-free ABER levels for the three scenarios considered as long as forward error correction (FEC) algorithms are employed. Therefore, OCDMA-FSO networks can be a prospective alternative to deliver high-speed communication services to access networks with deficient fiber...

Fabrication of ridge waveguide structure from photosensitive TiO2/ormosil hybrid films by using an ultraviolet soft imprint technique

International Nuclear Information System (INIS)

Zhang, Xuehua; Que, Wenxiu; Chen, Jing; Gao, Tianxi; Hu, Jiaxing; Liu, Weiguo

2013-01-01

Photosensitive TiO 2 /organically modified silane hybrid films were prepared by combining a low-temperature sol–gel process with a spin-coating technique. Optical properties and photochemical activities of the as-prepared hybrid sol–gel films under different UV irradiation time were characterized and monitored by prism coupling technique, UV–visible spectroscopy, and Fourier transform infrared spectroscopy. Surface morphology of the hybrid films was also observed by an atomic force microscopy. Advantages for fabrication of ridge waveguide structure based on the photosensitive hybrid films were demonstrated by an ultraviolet soft imprint technique. Effects of imprint force, imprint time, and UV irradiation time on high replication fidelity of the ridge waveguide structure were also investigated. An altitude replication fidelity of 99.7% can be obtained when the imprint force of 2 MPa, imprint time of 30 min and UV irradiation time of 45 min were chosen. Scanning electron microscopy and surface profiler were used to characterize the morphological and surface profile properties of the as fabricated ridge waveguide structure. Results indicate that the as-prepared photosensitive hybrid materials have great applicability for the fabrication of micro-optical elements and advantage as the imprint layer under the ultraviolet soft imprint technique. - Highlights: ► Photosensitive TiO 2 /ormosil hybrid film is prepared by a sol–gel process. ► Optical properties of the films change a little with UV exposure time. ► Photo-chemical property of the film changes a lot with UV exposure time. ► The imprint force and time, and the UV exposure time affect the imprint fidelity. ► A fidelity value of 99.7% is obtained under an optimized condition

Heart dose reduction in breast cancer treatment with simultaneous integrated boost. Comparison of treatment planning and dosimetry for a novel hybrid technique and 3D-CRT

International Nuclear Information System (INIS)

Joest, Vincent; Kretschmer, Matthias; Sabatino, Marcello; Wuerschmidt, Florian; Dahle, Joerg; Lorenzen, Joern; Ueberle, Friedrich

2015-01-01

The present study compares in silico treatment plans of clinically established three-dimensional conformal radiotherapy (3D-CRT) with a hybrid technique consisting of intensity-modulated radiotherapy (IMRT) and volumetric modulated arc radiotherapy (VMAT) during normally fractionated radiation of mammary carcinomas with simultaneous integrated boost on the basis of dose-volume histogram (DVH) parameters. Radiation treatment planning was performed with a hybrid and a 3D-CRT treatment plan for 20 patients. Hybrid plans were implemented with two tangential IMRT fields and a VMAT field in the angular range of the tangents. Verification of the plan was performed with a manufacturer-independent measurement system consisting of a detector array and rotation unit. The mean values of the heart dose for the entire patient collective were 3.6 ± 2.5 Gy for 3D-CRT and 2.9 ± 2.1 Gy for the hybrid technique (p < 0.01). For the left side (n = 10), the mean values for the left anterior descending artery were 21.8 ± 7.4 Gy for 3D-CRT and 17.6 ± 7.4 Gy for the hybrid technique (p < 0.01). The mean values of the ipsilateral lung were 11.9 ± 1.6 Gy for 3D-CRT and 10.5 ± 1.3 Gy for the hybrid technique (p < 0.01). Calculated dose distributions in the hybrid arm were in good accordance with measured dose (on average 95.6 ± 0.5 % for γ < 1 and 3 %/3 mm). The difference of the mean treatment time per fraction was 7 s in favor of 3D-CRT. Compared with the established 3D-CRT technique, the hybrid technique allows for a decrease in dose, particularly of the mean heart and lung dose with comparable target volume acquisition and without disadvantageous low-dose load of contralateral structures. Uncomplicated implementation of the hybrid technique was demonstrated in this context. The hybrid technique combines the advantages of tangential IMRT with the superior sparing of organs at risk by VMAT. (orig.) [de

Formality of the Chinese collective leadership.

Science.gov (United States)

Li, Haiying; Graesser, Arthur C

2016-09-01

We investigated the linguistic patterns in the discourse of four generations of the collective leadership of the Communist Party of China (CPC) from 1921 to 2012. The texts of Mao Zedong, Deng Xiaoping, Jiang Zemin, and Hu Jintao were analyzed using computational linguistic techniques (a Chinese formality score) to explore the persuasive linguistic features of the leaders in the contexts of power phase, the nation's education level, power duration, and age. The study was guided by the elaboration likelihood model of persuasion, which includes a central route (represented by formal discourse) versus a peripheral route (represented by informal discourse) to persuasion. The results revealed that these leaders adopted the formal, central route more when they were in power than before they came into power. The nation's education level was a significant factor in the leaders' adoption of the persuasion strategy. The leaders' formality also decreased with their increasing age and in-power times. However, the predictability of these factors for formality had subtle differences among the different types of leaders. These results enhance our understanding of the Chinese collective leadership and the role of formality in politically persuasive messages.

Hybrid machine learning technique for forecasting Dhaka stock market timing decisions.

Science.gov (United States)

Banik, Shipra; Khodadad Khan, A F M; Anwer, Mohammad

2014-01-01

Forecasting stock market has been a difficult job for applied researchers owing to nature of facts which is very noisy and time varying. However, this hypothesis has been featured by several empirical experiential studies and a number of researchers have efficiently applied machine learning techniques to forecast stock market. This paper studied stock prediction for the use of investors. It is always true that investors typically obtain loss because of uncertain investment purposes and unsighted assets. This paper proposes a rough set model, a neural network model, and a hybrid neural network and rough set model to find optimal buy and sell of a share on Dhaka stock exchange. Investigational findings demonstrate that our proposed hybrid model has higher precision than the single rough set model and the neural network model. We believe this paper findings will help stock investors to decide about optimal buy and/or sell time on Dhaka stock exchange.

Novel hybrid (magnet plus curve grasper) technique during transumbilical cholecystectomy: initial experience of a promising approach.

Science.gov (United States)

Millan, Carolina; Bignon, Horacion; Bellia, Gaston; Buela, Enrique; Rabinovich, Fernando; Albertal, Mariano; Martinez Ferro, Marcelo

2013-10-01

The use of magnets in transumbilical cholecystectomy (TUC) improves triangulation and achieves an optimal critical view. Nonetheless, the tendency of the magnets to collide hinders the process. In order to simplify the surgical technique, we developed a hybrid model with a single magnet and a curved grasper. All TUCs performed with a hybrid strategy in our pediatric population between September 2009 and July 2012 were retrospectively reviewed. Of 260 surgical procedures in which at least one magnet was used, 87 were TUCs. Of those, 62 were hybrid: 33 in adults and 29 in pediatric patients. The technique combines a magnet and a curved grasper. Through a transumbilical incision, we placed a 12-mm trocar and another flexible 5-mm trocar. The laparoscope with the working channel used the 12-mm trocar. The magnetic grasper was introduced to the abdominal cavity using the working channel to provide cephalic retraction of the gallbladder fundus. Across the flexible trocar, the assistant manipulated the curved grasper to mobilize the infundibulum. The surgeon operated through the working channel of the laparoscope. In this pediatric population, the mean age was 14 years (range, 4-17 years), and mean weight was 50 kg (range, 18-90 kg); 65% were girls. Mean operative time was 62 minutes. All procedures achieved a critical view of safety with no instrumental collision. There were no intraoperative or postoperative complications. The hospital stay was 1.4±0.6 days, and the median follow-up was 201 days. A hybrid technique, combining magnets and a curved grasper, simplifies transumbilical surgery. It seems feasible and safe for TUC and potentially reproducible.

Optimal control of hybrid vehicles

CERN Document Server

Jager, Bram; Kessels, John

2013-01-01

Optimal Control of Hybrid Vehicles provides a description of power train control for hybrid vehicles. The background, environmental motivation and control challenges associated with hybrid vehicles are introduced. The text includes mathematical models for all relevant components in the hybrid power train. The power split problem in hybrid power trains is formally described and several numerical solutions detailed, including dynamic programming and a novel solution for state-constrained optimal control problems based on Pontryagin’s maximum principle.   Real-time-implementable strategies that can approximate the optimal solution closely are dealt with in depth. Several approaches are discussed and compared, including a state-of-the-art strategy which is adaptive for vehicle conditions like velocity and mass. Two case studies are included in the book: ·        a control strategy for a micro-hybrid power train; and ·        experimental results obtained with a real-time strategy implemented in...

Formalisms for reuse and systems integration

CERN Document Server

Rubin, Stuart

2015-01-01

Reuse and integration are defined as synergistic concepts, where reuse addresses how to minimize redundancy in the creation of components; while, integration focuses on component composition. Integration supports reuse and vice versa. These related concepts support the design of software and systems for maximizing performance while minimizing cost. Knowledge, like data, is subject to reuse; and, each can be interpreted as the other. This means that inherent complexity, a measure of the potential utility of a system, is directly proportional to the extent to which it maximizes reuse and integration. Formal methods can provide an appropriate context for the rigorous handling of these synergistic concepts. Furthermore, formal languages allow for non ambiguous model specification; and, formal verification techniques provide support for insuring the validity of reuse and integration mechanisms.   This edited book includes 12 high quality research papers written by experts in formal aspects of reuse and integratio...

The importance of training in formal methods in Software Engineering

Directory of Open Access Journals (Sweden)

John Polansky

2014-12-01

Full Text Available The paradigm of formal methods provides systematic techniques and rigorous to software develop and, due the crescent complexity and quality requirements of current products, is necessary introduce them in curriculum of software engineer. In this article is analyzed the importance of train in formal methods and described specific techniques to achieved it efficiently. This techniques are the result of an experimental process in the class room of more than fifteen years in undergraduate and graduate programs, the same as company training. Also are presented a proposal a curriculum to systematic introduction of this paradigm and description of a program in training methods that has been success to industry. Results shows that students gain confidence in formal methods just when found out of the benefits of this in the context of software engineer.

Surgical technique for en bloc transurethral resection of bladder tumour with a Hybrid Knife(®).

Science.gov (United States)

Islas-García, J J O; Campos-Salcedo, J G; López-Benjume, B I; Torres-Gómez, J J; Aguilar-Colmenero, J; Martínez-Alonso, I A; Gil-Villa, S A

2016-05-01

Bladder cancer is the second most common malignancy of the urinary tract and the 9th worldwide. Latin American has an incidence of 5.6 per 100,000 inhabitants per year. Seventy-five percent of newly diagnosed cases are nonmuscle invasive bladder cancer, and 25% of cases present as muscle invasive. The mainstay of treatment for nonmuscle invasive bladder cancer is loop transurethral resection. In 2013, the group led by Dr Mundhenk of the University Hospital of Tübingen, Germany, was the first to describe the Hybrid Knife(®) equipment for performing en bloc bladder tumour resection, with favourable functional and oncological results. To describe the surgical technique of en bloc bladder tumour resection with a Hybrid Knife(®) as an alternative treatment for nonmuscle invasive bladder tumours. A male patient was diagnosed by urotomography and urethrocystoscopy with a bladder tumour measuring 2×1cm on the floor. En bloc transurethral resection of the bladder tumour was performed with a Hybrid Knife(®). Surgery was performed for 35min, with 70 watts for cutting and 50 watts for coagulation, resecting and evacuating en bloc the bladder tumour, which macroscopically included the muscle layer of the bladder. There were no complications. The technique of en bloc bladder tumour resection with Hybrid Knife(®) is an effective alternative to bipolar loop transurethral resection. Resection with a Hybrid Knife(®) is a procedure with little bleeding and good surgical vision and minimises the risk of bladder perforation and tumour implants. The procedure facilitates determining the positivity of the neoplastic process, vascular infiltration and bladder muscle invasion in the histopathology study. Copyright © 2015 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

The Metal-Zirconia Implant Fixed Hybrid Full-Arch Prosthesis: An Alternative Technique for Fabrication.

Science.gov (United States)

Stumpel, Lambert J; Haechler, Walter

2018-03-01

The metal-resin hybrid full-arch prosthesis has been a traditionally used type of restoration for full-arch implant fixed dentures. A newer development has centered around the use of monolithic zirconia or zirconia veneered with porcelain. Being a ceramic, zirconia has the potential for fracture. This article describes a technique that utilizes a metal substructure to support a chemically and mechanically resinbonded shell of zirconia. The workflow is discussed, ranging from in-office master cast fabrication to the CAD/ CAM production of the provisional and the definitive metal-zirconia prosthesis. The article also highlights the advantages and disadvantages of various materials used for hybrid prostheses.

Solving Linear Equations by Classical Jacobi-SR Based Hybrid Evolutionary Algorithm with Uniform Adaptation Technique

OpenAIRE

Jamali, R. M. Jalal Uddin; Hashem, M. M. A.; Hasan, M. Mahfuz; Rahman, Md. Bazlar

2013-01-01

Solving a set of simultaneous linear equations is probably the most important topic in numerical methods. For solving linear equations, iterative methods are preferred over the direct methods especially when the coefficient matrix is sparse. The rate of convergence of iteration method is increased by using Successive Relaxation (SR) technique. But SR technique is very much sensitive to relaxation factor, {\\omega}. Recently, hybridization of classical Gauss-Seidel based successive relaxation t...

Fabrication of ridge waveguide structure from photosensitive TiO{sub 2}/ormosil hybrid films by using an ultraviolet soft imprint technique

Energy Technology Data Exchange (ETDEWEB)

Zhang, Xuehua [Electronic Materials Research Laboratory, International Center for Dielectric Research, Xi' an Jiaotong University, Xi' an 710049, Shaanxi (China); Que, Wenxiu, E-mail: wxque@mail.xjtu.edu.cn [Electronic Materials Research Laboratory, International Center for Dielectric Research, Xi' an Jiaotong University, Xi' an 710049, Shaanxi (China); Chen, Jing; Gao, Tianxi; Hu, Jiaxing [Electronic Materials Research Laboratory, International Center for Dielectric Research, Xi' an Jiaotong University, Xi' an 710049, Shaanxi (China); Liu, Weiguo [Micro-optoelectronic Systems Laboratories, Xi' an Technological University, Xi' an 710032, Shaanxi (China)

2013-03-01

Photosensitive TiO{sub 2}/organically modified silane hybrid films were prepared by combining a low-temperature sol–gel process with a spin-coating technique. Optical properties and photochemical activities of the as-prepared hybrid sol–gel films under different UV irradiation time were characterized and monitored by prism coupling technique, UV–visible spectroscopy, and Fourier transform infrared spectroscopy. Surface morphology of the hybrid films was also observed by an atomic force microscopy. Advantages for fabrication of ridge waveguide structure based on the photosensitive hybrid films were demonstrated by an ultraviolet soft imprint technique. Effects of imprint force, imprint time, and UV irradiation time on high replication fidelity of the ridge waveguide structure were also investigated. An altitude replication fidelity of 99.7% can be obtained when the imprint force of 2 MPa, imprint time of 30 min and UV irradiation time of 45 min were chosen. Scanning electron microscopy and surface profiler were used to characterize the morphological and surface profile properties of the as fabricated ridge waveguide structure. Results indicate that the as-prepared photosensitive hybrid materials have great applicability for the fabrication of micro-optical elements and advantage as the imprint layer under the ultraviolet soft imprint technique. - Highlights: ► Photosensitive TiO{sub 2}/ormosil hybrid film is prepared by a sol–gel process. ► Optical properties of the films change a little with UV exposure time. ► Photo-chemical property of the film changes a lot with UV exposure time. ► The imprint force and time, and the UV exposure time affect the imprint fidelity. ► A fidelity value of 99.7% is obtained under an optimized condition.

Formal Analysis of Graphical Security Models

DEFF Research Database (Denmark)

Aslanyan, Zaruhi

, software components and human actors interacting with each other to form so-called socio-technical systems. The importance of socio-technical systems to modern societies requires verifying their security properties formally, while their inherent complexity makes manual analyses impracticable. Graphical...... models for security offer an unrivalled opportunity to describe socio-technical systems, for they allow to represent different aspects like human behaviour, computation and physical phenomena in an abstract yet uniform manner. Moreover, these models can be assigned a formal semantics, thereby allowing...... formal verification of their properties. Finally, their appealing graphical notations enable to communicate security concerns in an understandable way also to non-experts, often in charge of the decision making. This dissertation argues that automated techniques can be developed on graphical security...

Towards a Pattern Language for Hybrid Education

DEFF Research Database (Denmark)

Köppe, Christian; Nørgård, Rikke Toft; Pedersen, Alex Young

2017-01-01

-digital, academic-nonacademic, online-offline, formal-informal, learning-teaching and individual-collective. In doing so, hybrid education invites uncertainty, open-endedness, risk-taking, experimentation, critical creativity, disruption, dialogue and democracy (back) into the heart of education. Accordingly, we......In this paper we offer an initial framework for a pattern language of hybrid education. With the term hybrid education, we imply the use of educational design patterns that actively strive to cut across, circumventing or upheave traditional dichotomies within education such as physical...... see, within hybrid education, the promise to push against and circumvent current trends of marketization, managerialism and standardization in higher education today. Here, a pattern language for hybrid education presents an alternative way of designing for future higher education in ways...

Formal verification an essential toolkit for modern VLSI design

CERN Document Server

Seligman, Erik; Kumar, M V Achutha Kiran

2015-01-01

Formal Verification: An Essential Toolkit for Modern VLSI Design presents practical approaches for design and validation, with hands-on advice for working engineers integrating these techniques into their work. Building on a basic knowledge of System Verilog, this book demystifies FV and presents the practical applications that are bringing it into mainstream design and validation processes at Intel and other companies. The text prepares readers to effectively introduce FV in their organization and deploy FV techniques to increase design and validation productivity. Presents formal verific

Innovative hybrid pile oscillator technique in the Minerve reactor: open loop vs. closed loop

Science.gov (United States)

Geslot, Benoit; Gruel, Adrien; Bréaud, Stéphane; Leconte, Pierre; Blaise, Patrick

2018-01-01

Pile oscillator techniques are powerful methods to measure small reactivity worth of isotopes of interest for nuclear data improvement. This kind of experiments has long been implemented in the Mineve experimental reactor, operated by CEA Cadarache. A hybrid technique, mixing reactivity worth estimation and measurement of small changes around test samples is presented here. It was made possible after the development of high sensitivity miniature fission chambers introduced next to the irradiation channel. A test campaign, called MAESTRO-SL, took place in 2015. Its objective was to assess the feasibility of the hybrid method and investigate the possibility to separate mixed neutron effects, such as fission/capture or scattering/capture. Experimental results are presented and discussed in this paper, which focus on comparing two measurements setups, one using a power control system (closed loop) and another one where the power is free to drift (open loop). First, it is demonstrated that open loop is equivalent to closed loop. Uncertainty management and methods reproducibility are discussed. Second, results show that measuring the flux depression around oscillated samples provides valuable information regarding partial neutron cross sections. The technique is found to be very sensitive to the capture cross section at the expense of scattering, making it very useful to measure small capture effects of highly scattering samples.

Consistency Anchor Formalization and Correctness Proofs

OpenAIRE

Miguel, Correia; Bessani, Alysson

2014-01-01

This is report contains the formal proofs for the techniques for increasing the consistency of cloud storage as presented in "Bessani et al. SCFS: A Cloud-backed File System. Proc. of the 2014 USENIX Annual Technical Conference. June 2014." The consistency anchor technique allows one to increase the consistency provided by eventually consistent cloud storage services like Amazon S3. This technique has been used in the SCFS (Shared Cloud File System) cloud-backed file system for solving rea...

A double labeling technique for performing immunocytochemistry and in situ hybridization in virus infected cell cultures and tissues

International Nuclear Information System (INIS)

Gendelman, H.E.; Moench, T.R.; Narayan, O.; Griffin, D.E.; Clements, J.E.

1985-01-01

This report describes a combined immunocytochemical and in situ hybridization procedure which allows visualization of cellular or viral antigens and viral RNA in the same cell. Cultures infected with visna or measles virus were fixed in periodate-lysine-paraformaldehyde-glutaraldehyde, stained by the avidin-biotin-peroxidase technique using antibodies to viral or cellular proteins and then incubated with radiolabeled specific DNA probes (in situ hybridization). This technique provides a new approach to the study of viral pathogenesis by: (1) identifying the types of cells which are infected in the host and (2) identifying points of blockade in the virus life cycle during persistent infections. (Auth.)

Keldysh formalism for multiple parallel worlds

International Nuclear Information System (INIS)

Ansari, M.; Nazarov, Y. V.

2016-01-01

We present a compact and self-contained review of the recently developed Keldysh formalism for multiple parallel worlds. The formalism has been applied to consistent quantum evaluation of the flows of informational quantities, in particular, to the evaluation of Renyi and Shannon entropy flows. We start with the formulation of the standard and extended Keldysh techniques in a single world in a form convenient for our presentation. We explain the use of Keldysh contours encompassing multiple parallel worlds. In the end, we briefly summarize the concrete results obtained with the method.

Keldysh formalism for multiple parallel worlds

Science.gov (United States)

Ansari, M.; Nazarov, Y. V.

2016-03-01

We present a compact and self-contained review of the recently developed Keldysh formalism for multiple parallel worlds. The formalism has been applied to consistent quantum evaluation of the flows of informational quantities, in particular, to the evaluation of Renyi and Shannon entropy flows. We start with the formulation of the standard and extended Keldysh techniques in a single world in a form convenient for our presentation. We explain the use of Keldysh contours encompassing multiple parallel worlds. In the end, we briefly summarize the concrete results obtained with the method.

Keldysh formalism for multiple parallel worlds

Energy Technology Data Exchange (ETDEWEB)

Ansari, M.; Nazarov, Y. V., E-mail: y.v.nazarov@tudelft.nl [Delft University of Technology, Kavli Institute of Nanoscience (Netherlands)

2016-03-15

We present a compact and self-contained review of the recently developed Keldysh formalism for multiple parallel worlds. The formalism has been applied to consistent quantum evaluation of the flows of informational quantities, in particular, to the evaluation of Renyi and Shannon entropy flows. We start with the formulation of the standard and extended Keldysh techniques in a single world in a form convenient for our presentation. We explain the use of Keldysh contours encompassing multiple parallel worlds. In the end, we briefly summarize the concrete results obtained with the method.

Moderation instead of modelling: some arguments against formal engineering methods

NARCIS (Netherlands)

Rauterberg, G.W.M.; Sikorski, M.; Rauterberg, G.W.M.

1998-01-01

The more formal the used engineering techniques are, the less non-technical facts can be captured. Several business process reengineering and software development projects fail, because the project management concentrates to much on formal methods and modelling approaches. A successful change of

A Game-Theoretic approach to Fault Diagnosis of Hybrid Systems

Directory of Open Access Journals (Sweden)

Davide Bresolin

2011-06-01

Full Text Available Physical systems can fail. For this reason the problem of identifying and reacting to faults has received a large attention in the control and computer science communities. In this paper we study the fault diagnosis problem for hybrid systems from a game-theoretical point of view. A hybrid system is a system mixing continuous and discrete behaviours that cannot be faithfully modeled neither by using a formalism with continuous dynamics only nor by a formalism including only discrete dynamics. We use the well known framework of hybrid automata for modeling hybrid systems, and we define a Fault Diagnosis Game on them, using two players: the environment and the diagnoser. The environment controls the evolution of the system and chooses whether and when a fault occurs. The diagnoser observes the external behaviour of the system and announces whether a fault has occurred or not. Existence of a winning strategy for the diagnoser implies that faults can be detected correctly, while computing such a winning strategy corresponds to implement a diagnoser for the system. We will show how to determine the existence of a winning strategy, and how to compute it, for some decidable classes of hybrid automata like o-minimal hybrid automata.

A hybrid lightwave transmission system based on light injection/optoelectronic feedback techniques and fiber-VLLC integration

International Nuclear Information System (INIS)

Tsai, Wen-Shing; Lu, Hai-Han; Li, Chung-Yi; Chen, Bo-Rui; Lin, Hung-Hsien; Lin, Dai-Hua

2016-01-01

A hybrid lightwave transmission system based on light injection/optoelectronic feedback techniques and fiber-visible laser light communication (VLLC) integration is proposed and experimentally demonstrated. To be the first one of its kind in employing light injection and optoelectronic feedback techniques in a fiber-VLLC integration lightwave transmission system, the light is successfully directly modulated with Community Access Television (CATV), 16-QAM, and 16-QAM-OFDM signals. Over a 40 km SMF and a 10 m free-space VLLC transport, good performances of carrier-to-noise ratio (CNR)/composite second-order (CSO)/composite triple-beat (CTB)/bit error rate (BER) are achieved for CATV/16-QAM/16-QAM-OFDM signals transmission. Such a hybrid lightwave transmission system would be very useful since it can provide broadband integrated services including CATV, Internet, and telecommunication services over both distribute fiber and in-building networks. (letter)

A formal safety analysis for PLC software-based safety critical system using Z

International Nuclear Information System (INIS)

Koh, Jung Soo; Seong, Poong Hyun

1997-01-01

This paper describes a formal safety analysis technique which is demonstrated by performing empirical formal safety analysis with the case study of beamline hutch door Interlock system that is developed by using PLC (Programmable Logic Controller) systems at the Pohang Accelerator Laboratory. In order to perform formed safety analysis, we have built the Z formal specifications representation from user requirement written in ambiguous natural language and target PLC ladder logic, respectively. We have also studied the effective method to express typical PLC timer component by using specific Z formal notation which is supported by temporal history. We present a formal proof technique specifying and verifying that the hazardous states are not introduced into ladder logic in the PLC-based safety critical system

Hybrid-Logical Reasoning in False-Belief Tasks

OpenAIRE

Brauner, Torben

2013-01-01

The main aim of the present paper is to use a proof system for hybrid modal logic to formalize what are called falsebelief tasks in cognitive psychology, thereby investigating the interplay between cognition and logical reasoning about belief. We consider two different versions of the Smarties task, involving respectively a shift of perspective to another person and to another time. Our formalizations disclose that despite this difference, the two versions of the Smarties task have exactly th...

Towards a Pattern Language for Hybrid Education

DEFF Research Database (Denmark)

Köppe, Christian; Nørgård, Rikke Toft; Pedersen, Alex Young

2018-01-01

In this paper we offer an initial framework for a pattern language of hybrid education. With the term hybrid education, we imply the use of educa- tional design patterns that actively strive to cut across, circumventing or upheave traditional dichotomies within education such as physical-digital......, academic-nonacademic, online-offline, formal-informal, learning-teaching and individual-collective. In doing so, hybrid education invites uncertainty, open-endedness, risk-taking, experimentation, critical creativity, disruption, dialogue and democracy (back) into the heart of education. Accordingly we see...... on teaching to the test, playing it safe, rankings or gaming the system approaches. Rather, hybrid education focuses on open-endedness, risk-taking, relational entanglements, experimentation, exploration and empathy. In this way, designing for hybrid education is in this paper achieved, partly by taking...

Hybrid image classification technique for land-cover mapping in the Arctic tundra, North Slope, Alaska

Science.gov (United States)

Chaudhuri, Debasish

Remotely sensed image classification techniques are very useful to understand vegetation patterns and species combination in the vast and mostly inaccessible arctic region. Previous researches that were done for mapping of land cover and vegetation in the remote areas of northern Alaska have considerably low accuracies compared to other biomes. The unique arctic tundra environment with short growing season length, cloud cover, low sun angles, snow and ice cover hinders the effectiveness of remote sensing studies. The majority of image classification research done in this area as reported in the literature used traditional unsupervised clustering technique with Landsat MSS data. It was also emphasized by previous researchers that SPOT/HRV-XS data lacked the spectral resolution to identify the small arctic tundra vegetation parcels. Thus, there is a motivation and research need to apply a new classification technique to develop an updated, detailed and accurate vegetation map at a higher spatial resolution i.e. SPOT-5 data. Traditional classification techniques in remotely sensed image interpretation are based on spectral reflectance values with an assumption of the training data being normally distributed. Hence it is difficult to add ancillary data in classification procedures to improve accuracy. The purpose of this dissertation was to develop a hybrid image classification approach that effectively integrates ancillary information into the classification process and combines ISODATA clustering, rule-based classifier and the Multilayer Perceptron (MLP) classifier which uses artificial neural network (ANN). The main goal was to find out the best possible combination or sequence of classifiers for typically classifying tundra type vegetation that yields higher accuracy than the existing classified vegetation map from SPOT data. Unsupervised ISODATA clustering and rule-based classification techniques were combined to produce an intermediate classified map which was

High capacity fiber optic sensor networks using hybrid multiplexing techniques and their applications

Science.gov (United States)

Sun, Qizhen; Li, Xiaolei; Zhang, Manliang; Liu, Qi; Liu, Hai; Liu, Deming

2013-12-01

Fiber optic sensor network is the development trend of fiber senor technologies and industries. In this paper, I will discuss recent research progress on high capacity fiber sensor networks with hybrid multiplexing techniques and their applications in the fields of security monitoring, environment monitoring, Smart eHome, etc. Firstly, I will present the architecture of hybrid multiplexing sensor passive optical network (HSPON), and the key technologies for integrated access and intelligent management of massive fiber sensor units. Two typical hybrid WDM/TDM fiber sensor networks for perimeter intrusion monitor and cultural relics security are introduced. Secondly, we propose the concept of "Microstructure－Optical X Domin Refecltor (M-OXDR)" for fiber sensor network expansion. By fabricating smart micro-structures with the ability of multidimensional encoded and low insertion loss along the fiber, the fiber sensor network of simple structure and huge capacity more than one thousand could be achieved. Assisted by the WDM/TDM and WDM/FDM decoding methods respectively, we built the verification systems for long-haul and real-time temperature sensing. Finally, I will show the high capacity and flexible fiber sensor network with IPv6 protocol based hybrid fiber/wireless access. By developing the fiber optic sensor with embedded IPv6 protocol conversion module and IPv6 router, huge amounts of fiber optic sensor nodes can be uniquely addressed. Meanwhile, various sensing information could be integrated and accessed to the Next Generation Internet.

Contrast-Enhanced MR Angiography (CEMRA) in Peripheral Arterial Occlusive Disease (PAOD): conventional moving table technique versus hybrid technique

International Nuclear Information System (INIS)

Kalle, T. von; Gerlach, A.; Hatopp, A.; Klinger, S.; Prodehl, P.; Arlat, I.P.

2004-01-01

Patients and Methods: 80 patients (males n = 60, females n = 20, median age = 70 years, diabetics n = 27) with PAOD were examined with a 1,5T system (40 mT/m) using a dedicated phased array peripheral vascular coil. Protocol A consisted of a single injection of Gd-BOPTA with consecutive craniocaudal image acquisition and protocol B of two injections, with the first injection of Gd-BOPTA followed by image acquisition of the popliteocrural and pedal segments and the second injection followed by acquiring the aortoiliac and femoral segments (hybrid technique). The evaluation of the arterial system was directed to the iliac, femoral, popliteocrural and pedal arteries. Results: The visualization of the entire aortopedal vascular system was of diagnostically good or satisfactory quality in 16 of 40 patients using protocol A and in 29 of 40 patients using protocol B (iliac 40 vs. 37, femoral 40 vs. 40, popliteocrural 35 vs. 37, pedal 16 vs. 29); without the pedal station the number increased to 35 of 40 patients for both protocols. The reason of diagnostic limitations was an arteriovenous overlap in 24 of 80 cases, with 19 of 40 cases for protocol A and 5 of 40 for protocol B, located exclusively in the cruropedal region. Conclusion: Moving table hybrid CEMRA is superior to conventional technique in craniocaudal direction by producing less venous overlap of arteries and is especially more suitable for the diagnostic evaluation of the cruropedal region. (orig.) [de

Innovative hybrid pile oscillator technique in the Minerve reactor: open loop vs. closed loop

Directory of Open Access Journals (Sweden)

Geslot Benoit

2018-01-01

Full Text Available Pile oscillator techniques are powerful methods to measure small reactivity worth of isotopes of interest for nuclear data improvement. This kind of experiments has long been implemented in the Mineve experimental reactor, operated by CEA Cadarache. A hybrid technique, mixing reactivity worth estimation and measurement of small changes around test samples is presented here. It was made possible after the development of high sensitivity miniature fission chambers introduced next to the irradiation channel. A test campaign, called MAESTRO-SL, took place in 2015. Its objective was to assess the feasibility of the hybrid method and investigate the possibility to separate mixed neutron effects, such as fission/capture or scattering/capture. Experimental results are presented and discussed in this paper, which focus on comparing two measurements setups, one using a power control system (closed loop and another one where the power is free to drift (open loop. First, it is demonstrated that open loop is equivalent to closed loop. Uncertainty management and methods reproducibility are discussed. Second, results show that measuring the flux depression around oscillated samples provides valuable information regarding partial neutron cross sections. The technique is found to be very sensitive to the capture cross section at the expense of scattering, making it very useful to measure small capture effects of highly scattering samples.

Educational attainment, formal employment and contraceptives ...

African Journals Online (AJOL)

Based on this, the study examines educational attainment, formal employment and contraceptives practices among working women in Lagos State University. Survey design was adopted for the study. Using Stratified and simple random sampling techniques, quantitative data was gathered through the administration of ...

An efficient hybrid technique in RCS predictions of complex targets at high frequencies

Science.gov (United States)

Algar, María-Jesús; Lozano, Lorena; Moreno, Javier; González, Iván; Cátedra, Felipe

2017-09-01

Most computer codes in Radar Cross Section (RCS) prediction use Physical Optics (PO) and Physical theory of Diffraction (PTD) combined with Geometrical Optics (GO) and Geometrical Theory of Diffraction (GTD). The latter approaches are computationally cheaper and much more accurate for curved surfaces, but not applicable for the computation of the RCS of all surfaces of a complex object due to the presence of caustic problems in the analysis of concave surfaces or flat surfaces in the far field. The main contribution of this paper is the development of a hybrid method based on a new combination of two asymptotic techniques: GTD and PO, considering the advantages and avoiding the disadvantages of each of them. A very efficient and accurate method to analyze the RCS of complex structures at high frequencies is obtained with the new combination. The proposed new method has been validated comparing RCS results obtained for some simple cases using the proposed approach and RCS using the rigorous technique of Method of Moments (MoM). Some complex cases have been examined at high frequencies contrasting the results with PO. This study shows the accuracy and the efficiency of the hybrid method and its suitability for the computation of the RCS at really large and complex targets at high frequencies.

European Train Control System: A Case Study in Formal Verification

Science.gov (United States)

Platzer, André; Quesel, Jan-David

Complex physical systems have several degrees of freedom. They only work correctly when their control parameters obey corresponding constraints. Based on the informal specification of the European Train Control System (ETCS), we design a controller for its cooperation protocol. For its free parameters, we successively identify constraints that are required to ensure collision freedom. We formally prove the parameter constraints to be sharp by characterizing them equivalently in terms of reachability properties of the hybrid system dynamics. Using our deductive verification tool KeYmaera, we formally verify controllability, safety, liveness, and reactivity properties of the ETCS protocol that entail collision freedom. We prove that the ETCS protocol remains correct even in the presence of perturbation by disturbances in the dynamics. We verify that safety is preserved when a PI controlled speed supervision is used.

Formal verification of complex properties on PLC programs

CERN Document Server

Darvas, D; Voros, A; Bartha, T; Blanco Vinuela, E; Gonzalez Suarez, V M

2014-01-01

Formal verification has become a recommended practice in the safety-critical application areas. However, due to the complexity of practical control and safety systems, the state space explosion often prevents the use of formal analysis. In this paper we extend our former verification methodology with effective property preserving reduction techniques. For this purpose we developed general rule-based reductions and a customized version of the Cone of Influence (COI) reduction. Using these methods, the verification of complex requirements formalised with temporal logics (e.g. CTL, LTL) can be orders of magnitude faster. We use the NuSMV model checker on a real-life PLC program from CERN to demonstrate the performance of our reduction techniques.

Formalizing Implementation Strategies for First-Class Continuations

DEFF Research Database (Denmark)

Danvy, Olivier

1999-01-01

. These abstract machines are proven equivalent to a standard, substitution-based abstract machine. The proof techniques work uniformly for various representations of continuations. As a byproduct, we also present a formal proof of the two folklore theorems that one continuation identifier is enough for second......-class continuations and that second-class continuations are stackable. A large body of work exists on implementing continuations, but it is predominantly empirical and implementation-oriented. In contrast, our formalization abstracts the essence of first-class continuations and provides a uniform setting...

Establishment of 60Co dose calibration curve using fluorescent in situ hybridization assay technique: Result of preliminary study

International Nuclear Information System (INIS)

Rahimah Abdul Rahim; Noriah Jamal; Noraisyah Mohd Yusof; Juliana Mahamad Napiah; Nelly Bo Nai Lee

2010-01-01

This study aims at establishing an in-vitro 60 Co dose calibration curve using Fluorescent In-Situ Hybridization assay technique for the Malaysian National Bio dosimetry Laboratory. Blood samples collected from a female healthy donor were irradiated with several doses of 60 Co radiation. Following culturing of lymphocytes, microscopic slides are prepared, denatured and hybridized. The frequencies of translocation are estimated in the metaphases. A calibration curve was then generated using a regression technique. It shows a good fit to a linear-quadratic model. The results of this study might be useful in estimating absorbed dose for the individual exposed to ionizing radiation retrospectively. This information may be useful as a guide for medical treatment for the assessment of possible health consequences. (author)

REVIEW OF HEART DISEASE PREDICTION SYSTEM USING DATA MINING AND HYBRID INTELLIGENT TECHNIQUES

Directory of Open Access Journals (Sweden)

R. Chitra

2013-07-01

Full Text Available The Healthcare industry generally clinical diagnosis is done mostly by doctor’s expertise and experience. Computer Aided Decision Support System plays a major role in medical field. With the growing research on heart disease predicting system, it has become important to categories the research outcomes and provides readers with an overview of the existing heart disease prediction techniques in each category. Neural Networks are one of many data mining analytical tools that can be utilized to make predictions for medical data. From the study it is observed that Hybrid Intelligent Algorithm improves the accuracy of the heart disease prediction system. The commonly used techniques for Heart Disease Prediction and their complexities are summarized in this paper.

Specification and Verification of Hybrid System

International Nuclear Information System (INIS)

Widjaja, Belawati H.

1997-01-01

Hybrid systems are reactive systems which intermix between two components, discrete components and continuous components. The continuous components are usually called plants, subject to disturbances which cause the state variables of the systems changing continuously by physical laws and/or by the control laws. The discrete components can be digital computers, sensor and actuators controlled by programs. These programs are designed to select, control and supervise the behavior of the continuous components. Specification and verification of hybrid systems has recently become an active area of research in both computer science and control engineering, many papers concerning hybrid system have been published. This paper gives a design methodology for hybrid systems as an example to the specification and verification of hybrid systems. The design methodology is based on the cooperation between two disciplines, control engineering and computer science. The methodology brings into the design of control loops and decision loops. The external behavior of control loops are specified in a notation which is understandable by the two disciplines. The design of control loops which employed theory of differential equation is done by control engineers, and its correctness is also guaranteed analytically or experimentally by control engineers. The decision loops are designed in computing science based on the specifications of control loops. The verification of systems requirements can be done by computing scientists using a formal reasoning mechanism. For illustrating the proposed design, a problem of balancing an inverted pendulum which is a popular experiment device in control theory is considered, and the Mean Value Calculus is chosen as a formal notation for specifying the control loops and designing the decision loops

Hybrid vehicle energy management: singular optimal control

NARCIS (Netherlands)

Delprat, S.; Hofman, T.; Paganelli, S.

2017-01-01

Hybrid vehicle energymanagement is often studied in simulation as an optimal control problem. Under strict convexity assumptions, a solution can be developed using Pontryagin’s minimum principle. In practice, however, many engineers do not formally check these assumptions resulting in the possible

Engine Yaw Augmentation for Hybrid-Wing-Body Aircraft via Optimal Control Allocation Techniques

Science.gov (United States)

Taylor, Brian R.; Yoo, Seung Yeun

2011-01-01

Asymmetric engine thrust was implemented in a hybrid-wing-body non-linear simulation to reduce the amount of aerodynamic surface deflection required for yaw stability and control. Hybrid-wing-body aircraft are especially susceptible to yaw surface deflection due to their decreased bare airframe yaw stability resulting from the lack of a large vertical tail aft of the center of gravity. Reduced surface deflection, especially for trim during cruise flight, could reduce the fuel consumption of future aircraft. Designed as an add-on, optimal control allocation techniques were used to create a control law that tracks total thrust and yaw moment commands with an emphasis on not degrading the baseline system. Implementation of engine yaw augmentation is shown and feasibility is demonstrated in simulation with a potential drag reduction of 2 to 4 percent. Future flight tests are planned to demonstrate feasibility in a flight environment.

Digital system verification a combined formal methods and simulation framework

CERN Document Server

Li, Lun

2010-01-01

Integrated circuit capacity follows Moore's law, and chips are commonly produced at the time of this writing with over 70 million gates per device. Ensuring correct functional behavior of such large designs before fabrication poses an extremely challenging problem. Formal verification validates the correctness of the implementation of a design with respect to its specification through mathematical proof techniques. Formal techniques have been emerging as commercialized EDA tools in the past decade. Simulation remains a predominantly used tool to validate a design in industry. After more than 5

Abortive Intestinal Infection With an Escherichia coli-Shigella flexneri Hybrid Strain

Science.gov (United States)

Formal, Samuel B.; LaBrec, E. H.; Kent, T. H.; Falkow, S.

1965-01-01

Formal, Samuel B., (Walter Reed Army Institute of Research, Washington, D.C.), E. H. LaBrec, T. H. Kent, and S. Falkow. Abortive intestinal infection with an Escherichia coli-Shigella flexneri hybrid strain. J. Bacteriol. 89:1374–1382. 1965.—The mechanism of the apparent loss of virulence of an Escherichia coli-Shigella flexneri hybrid strain was studied. The parent Shigella strain caused a fatal enteric infection when fed to starved guinea pigs, and signs of dysentery followed its oral administration to monkeys. The hybrid strain failed to produce any apparent symptoms when fed to either of these species. The parent strain was shown to invade the intestinal mucosa of starved guinea pigs. This caused a severe inflammatory reaction in the lamina propria, which progressed to ulceration of the intestinal epithelium and resulted in death of the animal. The hybrid strain also invaded the intestinal mucosa and produced an inflammatory reaction. In this case, the inflammatory reaction subsided, the intestine returned to normal within 4 days after challenge, and the animal survived. Both fluorescent-antibody techniques and in vivo growth studies have shown that the hybrid strain can not maintain itself in the intestinal mucosa. Preliminary studies have indicated that a similar situation also exists in the monkey. It is concluded that the virulence of dysentery bacilli rests not only in the capacity to reach the lamina propria, but also in the ability to multiply in this region. Images PMID:14293011

A hybrid technique for private location-based queries with database protection

KAUST Repository

Ghinita, Gabriel

2009-01-01

Mobile devices with global positioning capabilities allow users to retrieve points of interest (POI) in their proximity. To protect user privacy, it is important not to disclose exact user coordinates to un-trusted entities that provide location-based services. Currently, there are two main approaches to protect the location privacy of users: (i) hiding locations inside cloaking regions (CRs) and (ii) encrypting location data using private information retrieval (PIR) protocols. Previous work focused on finding good trade-offs between privacy and performance of user protection techniques, but disregarded the important issue of protecting the POI dataset D. For instance, location cloaking requires large-sized CRs, leading to excessive disclosure of POIs (O(|D|) in the worst case). PIR, on the other hand, reduces this bound to , but at the expense of high processing and communication overhead. We propose a hybrid, two-step approach to private location-based queries, which provides protection for both the users and the database. In the first step, user locations are generalized to coarse-grained CRs which provide strong privacy. Next, a PIR protocol is applied with respect to the obtained query CR. To protect excessive disclosure of POI locations, we devise a cryptographic protocol that privately evaluates whether a point is enclosed inside a rectangular region. We also introduce an algorithm to efficiently support PIR on dynamic POI sub-sets. Our method discloses O(1) POI, orders of magnitude fewer than CR- or PIR-based techniques. Experimental results show that the hybrid approach is scalable in practice, and clearly outperforms the pure-PIR approach in terms of computational and communication overhead. © 2009 Springer Berlin Heidelberg.

On Formalization of the Concept of Value Proposition

OpenAIRE

Marek Winkler; Vladimír Dosoudil

2011-01-01

This paper presents an original description and a semi-formal definition of the concept of a value proposition, which has been so far used in service science rather intuitively. Our approach is based on utility functions and conceptual modelling techniques. The proposed semi-formalization can be exploited to describe services from the point of view of their (potential) utility for their clients. This description can be used especially to organize a service portfolio in an enterprise in a bett...

Exploring the lambda model of the hybrid superstring

Energy Technology Data Exchange (ETDEWEB)

Schmidtt, David M. [Instituto de Física Teórica IFT/UNESP,Rua Dr. Bento Teobaldo Ferraz 271, Bloco II, CEP 01140-070, São Paulo-SP (Brazil)

2016-10-26

The purpose of this contribution is to initiate the study of integrable deformations for different superstring theory formalisms that manifest the property of (classical) integrability. In this paper we choose the hybrid formalism of the superstring in the background AdS{sub 2}×S{sup 2} and explore in detail the most immediate consequences of its λ-deformation. The resulting action functional corresponds to the λ-model of the matter part of the fairly more sophisticated pure spinor formalism, which is also known to be classical integrable. In particular, the deformation preserves the integrability and the one-loop conformal invariance of its parent theory, hence being a marginal deformation.

Application of Fluorescence In Situ Hybridization (FISH) Technique for the Detection of Genetic Aberration in Medical Science

OpenAIRE

Ratan, Zubair Ahmed; Zaman, Sojib Bin; Mehta, Varshil; Haidere, Mohammad Faisal; Runa, Nusrat Jahan; Akter, Nasrin

2017-01-01

Fluorescence in situ hybridization (FISH) is a macromolecule recognition technique, which is considered as a new advent in the field of cytology.?Initially, it was developed as a physical mapping tool to delineate genes within chromosomes. The accuracy and versatility of FISH were subsequently capitalized upon in biological and medical research. This visually appealing technique provides an intermediate degree of resolution between DNA analysis and chromosomal investigations. FISH consists of...

Efficient Techniques for Formal Verification of PowerPC 750 Executables, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — We will develop an efficient tool for formal verification of PowerPC 750 executables. The PowerPC 750 architecture is used in the radiation-hardened RAD750...

Hybrid Societies: Challenges and Perspectives in the Design of Collective Behavior in Self-organizing Systems

Directory of Open Access Journals (Sweden)

Heiko eHamann

2016-04-01

Full Text Available Hybrid societies are self-organizing, collective systems composed of different components, for example, natural and artificial parts (bio-hybrid or human beings interacting with and through technical systems (socio-technical. Many different disciplines investigate methods and systems closely related to the design of hybrid societies. A~stronger collaboration between these disciplines could allow for re-use of methods and create significant synergies. We identify three main areas of challenges in the design of self-organizing hybrid societies. First, we identify the formalization challenge. There is an urgent need for a generic model that allows a description and comparison of collective hybrid societies. Second, we identify the system design challenge. Starting from the formal specification of the system, we need to develop an integrated design process. Third, we identify the challenge of interdisciplinarity. Current research on self-organizing hybrid societies stretches over many different fields and hence requires the re-use and synthesis of methods at intersections between disciplines. We then conclude by presenting our perspective for future approaches with high potential in this area.

SU-E-T-451: Hybrid-VMAT: A Novel Technique Combining VMAT and 3D in Planning Whole Breast Radiotherapy with a Simultaneously-Integrated Boost (WBRT+SIB)

International Nuclear Information System (INIS)

Guida, K; Qamar, K; Thompson, M

2015-01-01

Purpose: The RTOG 1005 trial offered a hypofractionated arm in delivering WBRT+SIB. Traditionally, treatments were planned at our institution using field-in-field (FiF) tangents with a concurrent 3D conformal boost. With the availability of VMAT, it is possible that a hybrid VMAT-3D planning technique could provide another avenue in treating WBRT+SIB. Methods: A retrospective study of nine patients previously treated using RTOG 1005 guidelines was performed to compare FiF+3D plans with the hybrid technique. A combination of static tangents and partial VMAT arcs were used in base-dose optimization. The hybrid plans were optimized to deliver 4005cGy to the breast PTVeval and 4800cGy to the lumpectomy PTVeval over 15 fractions. Plans were optimized to meet the planning goals dictated by RTOG 1005. Results: Hybrid plans yielded similar coverage of breast and lumpectomy PTVs (average D95 of 4013cGy compared to 3990cGy for conventional), while reducing the volume of high dose within the breast; the average D30 and D50 for the hybrid technique were 4517cGy and 4288cGy, compared to 4704cGy and 4377cGy for conventional planning. Hybrid plans increased conformity as well, yielding CI95% values of 1.22 and 1.54 for breast and lumpectomy PTVeval volumes; in contrast, conventional plans averaged 1.49 and 2.27, respectively. The nearby organs at risk (OARs) received more low dose with the hybrid plans due to low dose spray from the partial arcs, but all hybrid plans did meet the acceptable constraints, at a minimum, from the protocol. Treatment planning time was also reduced, as plans were inversely optimized (VMAT) rather than forward optimized. Conclusion: Hybrid-VMAT could be a solution in delivering WB+SIB, as plans yield very conformal treatment plans and maintain clinical standards in OAR sparing. For treating breast cancer patients with a simultaneously-integrated boost, Hybrid-VMAT offers superiority in dosimetric conformity and planning time as compared to FIF

SU-E-T-451: Hybrid-VMAT: A Novel Technique Combining VMAT and 3D in Planning Whole Breast Radiotherapy with a Simultaneously-Integrated Boost (WBRT+SIB)

Energy Technology Data Exchange (ETDEWEB)

Guida, K; Qamar, K; Thompson, M [University of Kansas Hospital, Kansas City, MO (United States)

2015-06-15

Purpose: The RTOG 1005 trial offered a hypofractionated arm in delivering WBRT+SIB. Traditionally, treatments were planned at our institution using field-in-field (FiF) tangents with a concurrent 3D conformal boost. With the availability of VMAT, it is possible that a hybrid VMAT-3D planning technique could provide another avenue in treating WBRT+SIB. Methods: A retrospective study of nine patients previously treated using RTOG 1005 guidelines was performed to compare FiF+3D plans with the hybrid technique. A combination of static tangents and partial VMAT arcs were used in base-dose optimization. The hybrid plans were optimized to deliver 4005cGy to the breast PTVeval and 4800cGy to the lumpectomy PTVeval over 15 fractions. Plans were optimized to meet the planning goals dictated by RTOG 1005. Results: Hybrid plans yielded similar coverage of breast and lumpectomy PTVs (average D95 of 4013cGy compared to 3990cGy for conventional), while reducing the volume of high dose within the breast; the average D30 and D50 for the hybrid technique were 4517cGy and 4288cGy, compared to 4704cGy and 4377cGy for conventional planning. Hybrid plans increased conformity as well, yielding CI95% values of 1.22 and 1.54 for breast and lumpectomy PTVeval volumes; in contrast, conventional plans averaged 1.49 and 2.27, respectively. The nearby organs at risk (OARs) received more low dose with the hybrid plans due to low dose spray from the partial arcs, but all hybrid plans did meet the acceptable constraints, at a minimum, from the protocol. Treatment planning time was also reduced, as plans were inversely optimized (VMAT) rather than forward optimized. Conclusion: Hybrid-VMAT could be a solution in delivering WB+SIB, as plans yield very conformal treatment plans and maintain clinical standards in OAR sparing. For treating breast cancer patients with a simultaneously-integrated boost, Hybrid-VMAT offers superiority in dosimetric conformity and planning time as compared to FIF

A formal safety analysis for PLC software-based safety critical system using Z

International Nuclear Information System (INIS)

Koh, Jung Soo

1997-02-01

This paper describes a formal safety analysis technique which is demonstrated by performing empirical formal safety analysis with the case study of beamline hutch door Interlock system that is developed by using PLC (Programmable Logic Controller) systems at the Pohang Accelerator Laboratory. In order to perform formal safety analysis, we have built the Z formal specifications representation from user requirement written in ambiguous natural language and target PLC ladder logic, respectively. We have also studied the effective method to express typical PLC timer component by using specific Z formal notation which is supported by temporal history. We present a formal proof technique specifying and verifying that the hazardous states are not introduced into ladder logic in the PLC-based safety critical system. And also, we have found that some errors or mismatches in user requirement and final implemented PLC ladder logic while analyzing the process of the consistency and completeness of Z translated formal specifications. In the case of relatively small systems like Beamline hutch door interlock system, a formal safety analysis including explicit proof is highly recommended so that the safety of PLC-based critical system may be enhanced and guaranteed. It also provides a helpful benefits enough to comprehend user requirement expressed by ambiguous natural language

Immobilization of Mo(IV) complex in hybrid matrix obtained via sol-gel technique

Energy Technology Data Exchange (ETDEWEB)

Marques, C.; Sousa, A.M.; Freire, C.; Neves, I.C.; Fonseca, A.M.; Silva, C.J.R

2003-10-06

A molybdenum(IV) complex, trans-bis-[1,2-bis(diphenylphosphino)ethane]-fluoro-(diazopropano) -molybdenum tetraphenylborate, [MoF(DIAZO)(dppe){sub 2}][BPh{sub 4}], was prepared and immobilized in a hybrid matrix synthesized by the sol-gel process. The host matrix, designated as U(500), is an organic-inorganic network material, classed as ureasil, that combines a reticulated siliceous backbone linked by short polyether-based segments. Urea bridges make the link between these two components, and the polymerization of silicate substituted terminal groups generates the inorganic network. The free Mo(IV) complex and all new materials were characterized by spectroscopic techniques (FT-IR and UV-Vis) and thermal analysis (DSC). The ionic conductivity of the resulting material was also studied. The results indicate that immobilized Mo(IV) complex has kept its solid-state structure, although there is evidence of inter-molecular interactions between the Mo(IV) complex and some groups/atoms of the hybrid host matrix.

Hybrid PIV-PTV technique for measuring blood flow in rat mesenteric vessels.

Science.gov (United States)

Ha, Hojin; Nam, Kweon-Ho; Lee, Sang Joon

2012-11-01

The micro-particle tracking velocimetry (μ-PTV) technique is used to obtain the velocity fields of blood flow in the microvasculature under in vivo conditions because it can provide the blood velocity distribution in microvessels with high spatial resolution. The in vivo μ-PTV technique usually requires a few to tens of seconds to obtain a whole velocity profile across the vessel diameter because of the limited number density of tracer particles under in vivo conditions. Thus, the μ-PTV technique alone is limited in measuring unsteady blood flows that fluctuate irregularly due to the heart beating and muscle movement in surrounding tissues. In this study, a new hybrid PIV-PTV technique was established by combining PTV and particle image velocimetry (PIV) techniques to resolve the drawbacks of the μ-PTV method in measuring blood flow in microvessels under in vivo conditions. Images of red blood cells (RBCs) and fluorescent particles in rat mesenteric vessels were obtained simultaneously. Temporal variations of the centerline blood velocity were monitored using a fast Fourier transform-based cross-correlation PIV method. The fluorescence particle images were analyzed using the μ-PTV technique to extract the spatial distribution of the velocity vectors. Data from the μ-PTV and PIV methods were combined to obtain a better estimate of the velocity profile in actual blood flow. This technique will be useful in investigating hemodynamics in microcirculation by measuring unsteady irregular blood flows more accurately. Copyright © 2012 Elsevier Inc. All rights reserved.

Hybrid-Based Dense Stereo Matching

Science.gov (United States)

Chuang, T. Y.; Ting, H. W.; Jaw, J. J.

2016-06-01

Stereo matching generating accurate and dense disparity maps is an indispensable technique for 3D exploitation of imagery in the fields of Computer vision and Photogrammetry. Although numerous solutions and advances have been proposed in the literature, occlusions, disparity discontinuities, sparse texture, image distortion, and illumination changes still lead to problematic issues and await better treatment. In this paper, a hybrid-based method based on semi-global matching is presented to tackle the challenges on dense stereo matching. To ease the sensitiveness of SGM cost aggregation towards penalty parameters, a formal way to provide proper penalty estimates is proposed. To this end, the study manipulates a shape-adaptive cross-based matching with an edge constraint to generate an initial disparity map for penalty estimation. Image edges, indicating the potential locations of occlusions as well as disparity discontinuities, are approved by the edge drawing algorithm to ensure the local support regions not to cover significant disparity changes. Besides, an additional penalty parameter 𝑃𝑒 is imposed onto the energy function of SGM cost aggregation to specifically handle edge pixels. Furthermore, the final disparities of edge pixels are found by weighting both values derived from the SGM cost aggregation and the U-SURF matching, providing more reliable estimates at disparity discontinuity areas. Evaluations on Middlebury stereo benchmarks demonstrate satisfactory performance and reveal the potency of the hybrid-based dense stereo matching method.

Scalar field dark matter in hybrid approach

NARCIS (Netherlands)

Friedrich, Pavel; Prokopec, Tomislav

2017-01-01

We develop a hybrid formalism suitable for modeling scalar field dark matter, in which the phase-space distribution associated to the real scalar field is modeled by statistical equal-time two-point functions and gravity is treated by two stochastic gravitational fields in the longitudinal gauge (in

Hybrid strategies in nanolithography

Energy Technology Data Exchange (ETDEWEB)

Saavedra, Hector M; Mullen, Thomas J; Zhang Pengpeng; Dewey, Daniel C; Claridge, Shelley A; Weiss, Paul S [Department of Chemistry, The Pennsylvania State University, University Park, PA 16802 (United States)], E-mail: psw@cnsi.ucla.edu

2010-03-15

Hybrid nanoscale patterning strategies combine the registration and addressability of conventional lithographic techniques with the chemical and physical functionality enabled by intermolecular, electrostatic and/or biological interactions. This review aims to highlight and to provide a comprehensive description of recent developments in hybrid nanoscale patterning strategies that enhance existing lithographic techniques or can be used to fabricate functional chemical patterns that interact with their environment. These functional structures create new capabilities, such as the fabrication of physicochemical surfaces that can recognize and capture analytes from complex liquid or gaseous mixtures. The nanolithographic techniques we describe can be classified into three general areas: traditional lithography, soft lithography and scanning-probe lithography. The strengths and limitations of each hybrid patterning technique will be discussed, along with the current and potential applications of the resulting patterned, functional surfaces.

Formal matrices

CERN Document Server

Krylov, Piotr

2017-01-01

This monograph is a comprehensive account of formal matrices, examining homological properties of modules over formal matrix rings and summarising the interplay between Morita contexts and K theory. While various special types of formal matrix rings have been studied for a long time from several points of view and appear in various textbooks, for instance to examine equivalences of module categories and to illustrate rings with one-sided non-symmetric properties, this particular class of rings has, so far, not been treated systematically. Exploring formal matrix rings of order 2 and introducing the notion of the determinant of a formal matrix over a commutative ring, this monograph further covers the Grothendieck and Whitehead groups of rings. Graduate students and researchers interested in ring theory, module theory and operator algebras will find this book particularly valuable. Containing numerous examples, Formal Matrices is a largely self-contained and accessible introduction to the topic, assuming a sol...

Speed control with torque ripple reduction of switched reluctance motor by Hybrid Many Optimizing Liaison Gravitational Search technique

Directory of Open Access Journals (Sweden)

Nutan Saha

2017-06-01

Full Text Available This paper presents a control scheme for simultaneous control of the speed of Switched Reluctance Motor (SRM and minimizing the torque ripple employing Hybrid Many Optimizing Liaison Gravitational Search Algorithm (Hybrid MOLGSA technique. The control mechanism includes two controlling loops, the outer loop is governed for speed control and a current controller for the inner loop, intelligent selection of turn on and turn off angle for a 60 KW, 3-phase 6/8 SRM. It is noticed that the torque ripple coefficient, ISE of speed & current are reduced by 12.81%, 38.60%, 16.74% respectively by Hybrid MOLGSA algorithm compared to Gravitational Search Algorithm (GSA algorithm. It is also observed that the settling times for the controller using the parameter values for obtaining best values of torque ripple, Integral square error of speed and current are reduced by 51.25%, 58.04% and 59.375% by proposed Hybrid MOLGSA algorithm compared to the GSA algorithm.

Enhancing System Realisation in Formal Model Development

DEFF Research Database (Denmark)

Tran-Jørgensen, Peter Würtz Vinther

and requirements of software extensions targeting Overture. The tools developed in this PhD project have successfully supported three case studies from externally funded projects. The feedback received from the case study work has further helped improve the code generation infrastructure and the tools built using...... implementation. One way to realise the system’s software is by automatically generating it from the formal specification – a technique referred to as code generation. However, in general it is difficult to make guarantees about the correctness of the generated code – especially while requiring automation...... of the steps involved in realising the formal specification. This PhD dissertation investigates ways to improve the automation of the steps involved in realising and validating a system based on a formal specification. The approach aims to develop properly designed software tools which support the integration...

A comprehensive overview of hybrid electric vehicle: Powertrain configurations, powertrain control techniques and electronic control units

Energy Technology Data Exchange (ETDEWEB)

Cagatay Bayindir, Kamil; Goezuekuecuek, Mehmet Ali; Teke, Ahmet [Cukurova University, Department of Electrical and Electronics Engineering, Balcali, Saricam, Adana (Turkey)

2011-02-15

The studies for hybrid electrical vehicle (HEV) have attracted considerable attention because of the necessity of developing alternative methods to generate energy for vehicles due to limited fuel based energy, global warming and exhaust emission limits in the last century. HEV incorporates internal composition engine, electric machines and power electronic equipments. In this study, overview of HEVs with a focus on hybrid configurations, energy management strategies and electronic control units are presented. Advantages and disadvantages of each configuration are clearly emphasized. The existing powertrain control techniques for HEVs are classified and comprehensively described. Electronic control units used in HEV configuration are also elaborated. The latest trends and technological challenges in the near future for HEVs are discussed. (author)

Multi-Wave and Hybrid Imaging Techniques: A New Direction for Nondestructive Testing and Structural Health Monitoring

Directory of Open Access Journals (Sweden)

Yuhua Cheng

2013-11-01

Full Text Available In this article, the state-of-the-art multi-wave and hybrid imaging techniques in the field of nondestructive evaluation and structural health monitoring were comprehensively reviewed. A new direction for assessment and health monitoring of various structures by capitalizing the advantages of those imaging methods was discussed. Although sharing similar system configurations, the imaging physics and principles of multi-wave phenomena and hybrid imaging methods are inherently different. After a brief introduction of nondestructive evaluation (NDE , structure health monitoring (SHM and their related challenges, several recent advances that have significantly extended imaging methods from laboratory development into practical applications were summarized, followed by conclusions and discussion on future directions.

Formal validation of supervisory energy management systems for microgrids

DEFF Research Database (Denmark)

Sugumar, Gayathri; Selvamuthukumaran, R.; Dragicevic, T.

2017-01-01

techniques are available in the literature to monitor and control the energy flows among distributed RES in MGs, formal verification of those techniques was not proposed yet. The emphasis of this paper is to design and validate energy management system for a MG which consists of a solar photovoltaic (PV...

Non-formal techniques for requirements elicitation, modeling, and early assessment for services

NARCIS (Netherlands)

van der Veer, Gerrit C.; Vyas, Dhaval; Dittmar, A.; Forbig, P.

2011-01-01

Designing systems for multiple stakeholders requires frequent collaboration with multiple stakeholders from the start. In many cases at least some stakeholders lack a professional habit of formal modeling. We report observations from two case studies of stakeholder involvement in early design where

High luminescent fibers with hybrid SiO2-coated CdTe nanocrystals fabricated by electrospinning technique

International Nuclear Information System (INIS)

Cao, Yongqiang; Liu, Ning; Yang, Ping; Shi, Ruixia; Ma, Qian; Zhang, Aiyu; Zhu, Yuanna; Wang, Junpeng; Wang, Jianrong

2015-01-01

The polyvinylpyrrolidone (PVP) hybrid luminescent micro-/nanofibers doped with the novel hybrid SiO 2 -coated CdTe nanocrystals (HS-CdTe NCs) have been fabricated for the first time via the electrospinning technique. The morphologies and photoluminescence (PL) emissions of HS-CdTe/PVP micro-/nanofibers prepared by doping the HS-CdTe NCs with the different PL peak wavelength (571, 616, and 643 nm) in PVP fibers were investigated by optical and PL microscope. The results revealed that all the HS-CdTe/PVP hybrid fibers showed an ultralong length for several hundreds of micrometers and a relatively uniform diameter of 1000 ∼ 1200 nm. The hybrid fibers displayed a wavelength-tunable PL emission, determining by the PL of doped HS-CdTe NCs. Moreover, similar to the original PL properties of HS-CdTe NCs before the electrospinning, the HS-CdTe/PVP fibers also showed a series of superior PL properties, such as narrow and symmetry PL spectrum, high, and uniform brightness. For comparison purpose, we also prepared three CdTe/PVP hybrid fibers by doping the 553 nm, 600 nm, and 633 nm PL-emitting CdTe NCs respectively in PVP electrospinning fibers. The characterization results showed that, the obtained three CdTe/PVP hybrid fibers had a basically satisfactory micro-/nanofiber morphology with a long length and relatively uniform diameter, but all the fibers exhibited very weak PL emissions. The enormous contrast in PL properties between HS-CdTe/PVP and CdTe/PVP fibers should mainly be ascribed to the different connection modes of ligands with the NCs and the passivation effect of inert hybrid silica shell on HS-CdTe. It is hopeful that the high luminescent HS-CdTe/PVP micro-/nanofibers with the tunable PL peak wavelength would be a good candidate in the optical sensor, light-emitting devices (LEDs), nanometer-scale waveguides, and the other related photonic materials. - Highlights: • The HS-CdTe/PVP electrospun hybrid fibers were fabricated for the first time. • The

Adaptively locating unknown steady states: Formalism and basin of attraction

International Nuclear Information System (INIS)

Wu, Yu; Lin, Wei

2011-01-01

The adaptive technique, which includes both dynamical estimators and coupling gains, has been recently verified to be practical for locating the unknown steady states numerically. This Letter, in the light of the center manifold theory for dynamical systems and the matrix spectrum principle, establishes an analytical formalism of this adaptive technique and reveals a connection between this technique and the original adaptive controller which includes only the dynamical estimator. More interestingly, in study of the well-known Lorenz system, the selections of the estimator parameters and initial values are found to be crucial to the successful application of the adaptive technique. Some Milnor-like basins of attraction with fractal structures are found quantitatively. All the results obtained in the Letter can be further extended to more general dynamical systems of higher dimensions. -- Highlights: → Establishing a new and rigorous formalism for the adaptive stabilization technique. → Showing a close connection between the adaptive technique and the original controller. → Providing feasible algorithms for simultaneous stabilization of multiple steady states. → Finding Milnor-like basins of attraction with fractal structures in adaptive control.

Safety Verification for Probabilistic Hybrid Systems

Czech Academy of Sciences Publication Activity Database

Zhang, J.; She, Z.; Ratschan, Stefan; Hermanns, H.; Hahn, E.M.

2012-01-01

Roč. 18, č. 6 (2012), s. 572-587 ISSN 0947-3580 R&D Projects: GA MŠk OC10048; GA ČR GC201/08/J020 Institutional research plan: CEZ:AV0Z10300504 Keywords : model checking * hybrid system s * formal verification Subject RIV: IN - Informatics, Computer Science Impact factor: 1.250, year: 2012

Spinor formalism and complex-vector formalism of general relativity

International Nuclear Information System (INIS)

Han-ying, G.; Yong-shi, W.; Gendao, L.

1974-01-01

In this paper, using E. Cartan's exterior calculus, we give the spinor form of the structure equations, which leads naturally to the Newman--Penrose equations. Furthermore, starting from the spinor spaces and the el (2C) algebra, we construct the general complex-vector formalism of general relativity. We find that both the Cahen--Debever--Defrise complex-vector formalism and that of Brans are its special cases. Thus, the spinor formalism and the complex-vector formalism of general relativity are unified on the basis of the uni-modular group SL(2C) and its Lie algebra

Automated Formal Verification for PLC Control Systems

CERN Multimedia

Fernández Adiego, Borja

2014-01-01

Programmable Logic Controllers (PLCs) are widely used devices used in industrial control systems. Ensuring that the PLC software is compliant with its specification is a challenging task. Formal verification has become a recommended practice to ensure the correctness of the safety-critical software. However, these techniques are still not widely applied in industry due to the complexity of building formal models, which represent the system and the formalization of requirement specifications. We propose a general methodology to perform automated model checking of complex properties expressed in temporal logics (e.g. CTL, LTL) on PLC programs. This methodology is based on an Intermediate Model (IM), meant to transform PLC programs written in any of the languages described in the IEC 61131-3 standard (ST, IL, etc.) to different modeling languages of verification tools. This approach has been applied to CERN PLC programs validating the methodology.

Hybrid Clustering-GWO-NARX neural network technique in predicting stock price

Science.gov (United States)

Das, Debashish; Safa Sadiq, Ali; Mirjalili, Seyedali; Noraziah, A.

2017-09-01

Prediction of stock price is one of the most challenging tasks due to nonlinear nature of the stock data. Though numerous attempts have been made to predict the stock price by applying various techniques, yet the predicted price is not always accurate and even the error rate is high to some extent. Consequently, this paper endeavours to determine an efficient stock prediction strategy by implementing a combinatorial method of Grey Wolf Optimizer (GWO), Clustering and Non Linear Autoregressive Exogenous (NARX) Technique. The study uses stock data from prominent stock market i.e. New York Stock Exchange (NYSE), NASDAQ and emerging stock market i.e. Malaysian Stock Market (Bursa Malaysia), Dhaka Stock Exchange (DSE). It applies K-means clustering algorithm to determine the most promising cluster, then MGWO is used to determine the classification rate and finally the stock price is predicted by applying NARX neural network algorithm. The prediction performance gained through experimentation is compared and assessed to guide the investors in making investment decision. The result through this technique is indeed promising as it has shown almost precise prediction and improved error rate. We have applied the hybrid Clustering-GWO-NARX neural network technique in predicting stock price. We intend to work with the effect of various factors in stock price movement and selection of parameters. We will further investigate the influence of company news either positive or negative in stock price movement. We would be also interested to predict the Stock indices.

SBME : Exploring boundaries between formal, non-formal, and informal learning

OpenAIRE

Shahoumian, Armineh; Parchoma, Gale; Saunders, Murray; Hanson, Jacky; Dickinson, Mike; Pimblett, Mark

2013-01-01

In medical education learning extends beyond university settings into practice. Non-formal and informal learning support learners’ efforts to meet externally set and learner-identified objectives. In SBME research, boundaries between formal, non-formal, and informal learning have not been widely explored. Whether SBME fits within or challenges these categories can make a contribution. Formal learning is described in relation to educational settings, planning, assessment, and accreditation. In...

Formalization of Database Systems -- and a Formal Definition of {IMS}

DEFF Research Database (Denmark)

Bjørner, Dines; Løvengreen, Hans Henrik

1982-01-01

Drawing upon an analogy between Programming Language Systems and Database Systems we outline the requirements that architectural specifications of database systems must futfitl, and argue that only formal, mathematical definitions may 6atisfy these. Then we illustrate home aspects and touch upon...... come ueee of formal definitions of data models and databaee management systems. A formal model of INS will carry this discussion. Finally we survey some of the exkting literature on formal definitions of database systems. The emphasis will be on constructive definitions in the denotationul semantics...... style of the VCM: Vienna Development Nethd. The role of formal definitions in international standardiaation efforts is briefly mentioned....

Fourier Series Formalization in ACL2(r

Directory of Open Access Journals (Sweden)

Cuong K. Chau

2015-09-01

Full Text Available We formalize some basic properties of Fourier series in the logic of ACL2(r, which is a variant of ACL2 that supports reasoning about the real and complex numbers by way of non-standard analysis. More specifically, we extend a framework for formally evaluating definite integrals of real-valued, continuous functions using the Second Fundamental Theorem of Calculus. Our extended framework is also applied to functions containing free arguments. Using this framework, we are able to prove the orthogonality relationships between trigonometric functions, which are the essential properties in Fourier series analysis. The sum rule for definite integrals of indexed sums is also formalized by applying the extended framework along with the First Fundamental Theorem of Calculus and the sum rule for differentiation. The Fourier coefficient formulas of periodic functions are then formalized from the orthogonality relations and the sum rule for integration. Consequently, the uniqueness of Fourier sums is a straightforward corollary. We also present our formalization of the sum rule for definite integrals of infinite series in ACL2(r. Part of this task is to prove the Dini Uniform Convergence Theorem and the continuity of a limit function under certain conditions. A key technique in our proofs of these theorems is to apply the overspill principle from non-standard analysis.

WRHT: A Hybrid Technique for Detection of Wormhole Attack in Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Rupinder Singh

2016-01-01

Full Text Available Wormhole attack is a challenging security threat to wireless sensor networks which results in disrupting most of the routing protocols as this attack can be triggered in different modes. In this paper, WRHT, a wormhole resistant hybrid technique, is proposed, which can detect the presence of wormhole attack in a more optimistic manner than earlier techniques. WRHT is based on the concept of watchdog and Delphi schemes and ensures that the wormhole will not be left untreated in the sensor network. WRHT makes use of the dual wormhole detection mechanism of calculating probability factor time delay probability and packet loss probability of the established path in order to find the value of wormhole presence probability. The nodes in the path are given different ranking and subsequently colors according to their behavior. The most striking feature of WRHT consists of its capacity to defend against almost all categories of wormhole attacks without depending on any required additional hardware such as global positioning system, timing information or synchronized clocks, and traditional cryptographic schemes demanding high computational needs. The experimental results clearly indicate that the proposed technique has significant improvement over the existing wormhole attack detection techniques.

Creative Process: Its Use and Extent of Formalization by Corporations.

Science.gov (United States)

Fernald, Lloyd W., Jr.; Nickolenko, Pam

1993-01-01

This study reports creativity policies and practices used by Central Florida corporations. Survey responses (n=105) indicated that businesses are using a variety of creativity techniques with usage greater among the newer companies but that these techniques are not yet a formal part of business operations. (DB)

Developing Formal Correctness Properties from Natural Language Requirements

Science.gov (United States)

Nikora, Allen P.

2006-01-01

This viewgraph presentation reviews the rationale of the program to transform natural language specifications into formal notation.Specifically, automate generation of Linear Temporal Logic (LTL)correctness properties from natural language temporal specifications. There are several reasons for this approach (1) Model-based techniques becoming more widely accepted, (2) Analytical verification techniques (e.g., model checking, theorem proving) significantly more effective at detecting types of specification design errors (e.g., race conditions, deadlock) than manual inspection, (3) Many requirements still written in natural language, which results in a high learning curve for specification languages, associated tools and increased schedule and budget pressure on projects reduce training opportunities for engineers, and (4) Formulation of correctness properties for system models can be a difficult problem. This has relevance to NASA in that it would simplify development of formal correctness properties, lead to more widespread use of model-based specification, design techniques, assist in earlier identification of defects and reduce residual defect content for space mission software systems. The presentation also discusses: potential applications, accomplishments and/or technological transfer potential and the next steps.

Proceedings of the First NASA Formal Methods Symposium

Science.gov (United States)

Denney, Ewen (Editor); Giannakopoulou, Dimitra (Editor); Pasareanu, Corina S. (Editor)

2009-01-01

Topics covered include: Model Checking - My 27-Year Quest to Overcome the State Explosion Problem; Applying Formal Methods to NASA Projects: Transition from Research to Practice; TLA+: Whence, Wherefore, and Whither; Formal Methods Applications in Air Transportation; Theorem Proving in Intel Hardware Design; Building a Formal Model of a Human-Interactive System: Insights into the Integration of Formal Methods and Human Factors Engineering; Model Checking for Autonomic Systems Specified with ASSL; A Game-Theoretic Approach to Branching Time Abstract-Check-Refine Process; Software Model Checking Without Source Code; Generalized Abstract Symbolic Summaries; A Comparative Study of Randomized Constraint Solvers for Random-Symbolic Testing; Component-Oriented Behavior Extraction for Autonomic System Design; Automated Verification of Design Patterns with LePUS3; A Module Language for Typing by Contracts; From Goal-Oriented Requirements to Event-B Specifications; Introduction of Virtualization Technology to Multi-Process Model Checking; Comparing Techniques for Certified Static Analysis; Towards a Framework for Generating Tests to Satisfy Complex Code Coverage in Java Pathfinder; jFuzz: A Concolic Whitebox Fuzzer for Java; Machine-Checkable Timed CSP; Stochastic Formal Correctness of Numerical Algorithms; Deductive Verification of Cryptographic Software; Coloured Petri Net Refinement Specification and Correctness Proof with Coq; Modeling Guidelines for Code Generation in the Railway Signaling Context; Tactical Synthesis Of Efficient Global Search Algorithms; Towards Co-Engineering Communicating Autonomous Cyber-Physical Systems; and Formal Methods for Automated Diagnosis of Autosub 6000.

Application of Genomic In Situ Hybridization in Horticultural Science

Directory of Open Access Journals (Sweden)

Fahad Ramzan

2017-01-01

Full Text Available Molecular cytogenetic techniques, such as in situ hybridization methods, are admirable tools to analyze the genomic structure and function, chromosome constituents, recombination patterns, alien gene introgression, genome evolution, aneuploidy, and polyploidy and also genome constitution visualization and chromosome discrimination from different genomes in allopolyploids of various horticultural crops. Using GISH advancement as multicolor detection is a significant approach to analyze the small and numerous chromosomes in fruit species, for example, Diospyros hybrids. This analytical technique has proved to be the most exact and effective way for hybrid status confirmation and helps remarkably to distinguish donor parental genomes in hybrids such as Clivia, Rhododendron, and Lycoris ornamental hybrids. The genome characterization facilitates in hybrid selection having potential desirable characteristics during the early hybridization breeding, as this technique expedites to detect introgressed sequence chromosomes. This review study epitomizes applications and advancements of genomic in situ hybridization (GISH techniques in horticultural plants.

Identification of bacteria used for microbial enhanced oil recovery process by fluorescence in situ hybridization technique

Energy Technology Data Exchange (ETDEWEB)

Fujiwara, K.; Tanaka, S.; Otsuka, M. [Kansai Research Institute, Kyoto (Japan). Lifescience Lab.; Yonebayashi, H. [Japan National Oil Corp., Chiba (Japan). Tech. Research Center; Enomoto, H. [Tohoku University, Sendai (Japan). Dept. of Geoscience and Tech.

2000-01-01

A fluorescence in situ hybridization (FISH) technique using 16S rRNA-targeted oligonucleotide probes was developed for rapid detection of microorganisms for use in the microbial enhancement of oil recovery (MEOR) process. Two microorganisms, Enterobacter cloacae TRC-322 and Bacillus licheniformis TRC-18-2-a, were selected from a collection of Enterobacter sp. and Bacillus sp. which were screened in previous studies as candidate microorganisms for injection, and were used for this experiment. Oligonucleotide probes, design based on specific sequences in the 16S rRNA gene were labeled with either fluorescein isothiocyanate (FITC), or 6-car-boxy-X-rhodamine (ROX), and were allowed to hybridize with fixed cells of the two microorganisms noted above. The fluorescence signal emitted from each microorganism cells could clearly be detected by an epifluorescence microscope. Moreover, E. cloacae TRC-322 and B, licheniformis TRC-18-2-a, suspended in actual reservoir brine, including inorganic salts, oil and aboriginal cells of the reservoir brine, could be detected directly by this hybridization method, without the need for cultivation and isolation. (author)

Model-Based Design and Formal Verification Processes for Automated Waterway System Operations

Directory of Open Access Journals (Sweden)

Leonard Petnga

2016-06-01

Full Text Available Waterway and canal systems are particularly cost effective in the transport of bulk and containerized goods to support global trade. Yet, despite these benefits, they are among the most under-appreciated forms of transportation engineering systems. Looking ahead, the long-term view is not rosy. Failures, delays, incidents and accidents in aging waterway systems are doing little to attract the technical and economic assistance required for modernization and sustainability. In a step toward overcoming these challenges, this paper argues that programs for waterway and canal modernization and sustainability can benefit significantly from system thinking, supported by systems engineering techniques. We propose a multi-level multi-stage methodology for the model-based design, simulation and formal verification of automated waterway system operations. At the front-end of development, semi-formal modeling techniques are employed for the representation of project goals and scenarios, requirements and high-level models of behavior and structure. To assure the accuracy of engineering predictions and the correctness of operations, formal modeling techniques are used for the performance assessment and the formal verification of the correctness of functionality. The essential features of this methodology are highlighted in a case study examination of ship and lock-system behaviors in a two-stage lock system.

SUSY formalism for the symmetric double well potential

Indian Academy of Sciences (India)

Using first- and second-order supersymmetric Darboüx formalism and starting with symmetric double well potential barrier we have obtained a class of exactly solvable potentials subject to moving boundary condition. The eigenstates are also obtained by the same technique.

SELF-EFFICACY OF FORMALLY AND NON-FORMALLY TRAINED PUBLIC SECTOR TEACHERS

Directory of Open Access Journals (Sweden)

Muhammad Nadeem ANWAR

2009-07-01

Full Text Available The main objective of the study was to compare the formally and non-formally trained in-service public sector teachers’ Self-efficacy. Five hypotheses were developed describing no difference in the self-efficacy of formally and non-formally trained teachers to influence decision making, influence school resources, instructional self-efficacy, disciplinary self-efficacy and create positive school climate. Teacher Efficacy Instrument (TSES developed by Bandura (2001 consisting of thirty 9-point items was used in the study. 342 formally trained and 255 non-formally trained respondents’ questionnaires were received out of 1500 mailed. The analysis of data revealed that the formally trained public sector teachers are high in their self-efficacy on all the five categories: to influence decision making, to influence school resources, instructional self-efficacy, disciplinary self-efficacy and self-efficacy to create positive school climate.

Masses of Formal Philosophy

DEFF Research Database (Denmark)

Masses of Formal Philosophy is an outgrowth of Formal Philosophy. That book gathered the responses of some of the most prominent formal philosophers to five relatively open and broad questions initiating a discussion of metaphilosophical themes and problems surrounding the use of formal methods i...... in philosophy. Including contributions from a wide range of philosophers, Masses of Formal Philosophy contains important new responses to the original five questions.......Masses of Formal Philosophy is an outgrowth of Formal Philosophy. That book gathered the responses of some of the most prominent formal philosophers to five relatively open and broad questions initiating a discussion of metaphilosophical themes and problems surrounding the use of formal methods...

A new approach for formal behavioral modeling of protection services in antivirus systems

OpenAIRE

Norouzi, Monire; Parsa, Saeed; Mahjur, Ali

2014-01-01

Formal method techniques provides a suitable platform for the software development in software systems. Formal methods and formal verification is necessary to prove the correctness and improve performance of software systems in various levels of design and implementation, too. Security Discussion is an important issue in computer systems. Since the antivirus applications have very important role in computer systems security, verifying these applications is very essential and necessary. In thi...

Stabilization of ion temperature gradient driven modes by lower hybrid wave in a tokamak

International Nuclear Information System (INIS)

Kuley, Animesh; Tripathi, V. K.

2009-01-01

A gyrokinetic formalism has been developed to study lower hybrid wave stabilization of ion temperature gradient driven modes, responsible for anomalous ion transport in the inner region of tokamak. The parametric coupling between lower hybrid and drift waves produce lower hybrid sideband waves. The pump and the sidebands exert a ponderomotive force on electrons, modifying the eigenfrequency of the drift wave and influencing the growth rate. The longer wavelength drift waves are destabilized by the lower hybrid wave while the shorter wavelengths are suppressed. The requiste lower hybrid power is in the range of ∼900 kW at 4.6 GHz.

Degradation of reactive orange 4 dye using hydrodynamic cavitation based hybrid techniques.

Science.gov (United States)

Gore, Mohan M; Saharan, Virendra Kumar; Pinjari, Dipak V; Chavan, Prakash V; Pandit, Aniruddha B

2014-05-01

In the present work, degradation of reactive orange 4 dye (RO4) has been investigated using hydrodynamic cavitation (HC) and in combination with other AOP's. In the hybrid techniques, combination of hydrodynamic cavitation and other oxidizing agents such as H2O2 and ozone have been used to get the enhanced degradation efficiency through HC device. The hydrodynamic cavitation was first optimized in terms of different operating parameters such as operating inlet pressure, cavitation number and pH of the operating medium to get the maximum degradation of RO4. Following the optimization of HC parameters, the degradation of RO4 was carried out using the combination of HC with H2O2 and ozone. It has been found that the efficiency of the HC can be improved significantly by combining it with H2O2 and ozone. The mineralization rate of RO4 increases considerably with 14.67% mineralization taking place using HC alone increases to 31.90% by combining it with H2O2 and further increases to 76.25% through the combination of HC and ozone. The synergetic coefficient of greater than one for the hybrid processes of HC+H2O2 and HC+Ozone has suggested that the combination of HC with other oxidizing agents is better than the individual processes for the degradation of dye effluent containing RO4. The combination of HC with ozone proves to be the most energy efficient method for the degradation of RO4 as compared to HC alone and the hybrid process of HC and H2O2. Copyright © 2013 Elsevier B.V. All rights reserved.

On the Need for Practical Formal Methods

Science.gov (United States)

1998-01-01

additional research and engineering that is needed to make the current set of formal methods more practical. To illustrate the ideas, I present several exam ...either a good violin or a highly talented violinist. Light-weight techniques o er software developers good violins . A user need not be a talented

Formal verification of dynamic hybrid systems: a NuSMV-based model checking approach

Directory of Open Access Journals (Sweden)

Xu Zhi

2018-01-01

Full Text Available Software security is an important and challenging research topic in developing dynamic hybrid embedded software systems. Ensuring the correct behavior of these systems is particularly difficult due to the interactions between the continuous subsystem and the discrete subsystem. Currently available security analysis methods for system risks have been limited, as they rely on manual inspections of the individual subsystems under simplifying assumptions. To improve this situation, a new approach is proposed that is based on the symbolic model checking tool NuSMV. A dual PID system is used as an example system, for which the logical part and the computational part of the system are modeled in a unified manner. Constraints are constructed on the controlled object, and a counter-example path is ultimately generated, indicating that the hybrid system can be analyzed by the model checking tool.

Fuzzy and rough formal concept analysis: a survey

NARCIS (Netherlands)

Poelmans, J.; Ignatov, D.I.; Kuznetsov, S.O.; Dedene, G.

2014-01-01

Formal Concept Analysis (FCA) is a mathematical technique that has been extensively applied to Boolean data in knowledge discovery, information retrieval, web mining, etc. applications. During the past years, the research on extending FCA theory to cope with imprecise and incomplete information made

Application of Fluorescence In Situ Hybridization (FISH) Technique for the Detection of Genetic Aberration in Medical Science

Science.gov (United States)

Ratan, Zubair Ahmed; Zaman, Sojib Bin; Haidere, Mohammad Faisal; Runa, Nusrat Jahan; Akter, Nasrin

2017-01-01

Fluorescence in situ hybridization (FISH) is a macromolecule recognition technique, which is considered as a new advent in the field of cytology. Initially, it was developed as a physical mapping tool to delineate genes within chromosomes. The accuracy and versatility of FISH were subsequently capitalized upon in biological and medical research. This visually appealing technique provides an intermediate degree of resolution between DNA analysis and chromosomal investigations. FISH consists of a hybridizing DNA probe, which can be labeled directly or indirectly. In the case of direct labeling, fluorescent nucleotides are used, while indirect labeling is incorporated with reporter molecules that are subsequently detected by fluorescent antibodies or other affinity molecules. FISH is applied to detect genetic abnormalities that include different characteristic gene fusions or the presence of an abnormal number of chromosomes in a cell or loss of a chromosomal region or a whole chromosome. It is also applied in different research applications, such as gene mapping or the identification of novel oncogenes. This article reviews the concept of FISH, its application, and its advantages in medical science.  PMID:28690958

Skill Assessment of An Hybrid Technique To Estimate Quantitative Precipitation Forecast For Galicia (nw Spain)

Science.gov (United States)

Lage, A.; Taboada, J. J.

Precipitation is the most obvious of the weather elements in its effects on normal life. Numerical weather prediction (NWP) is generally used to produce quantitative precip- itation forecast (QPF) beyond the 1-3 h time frame. These models often fail to predict small-scale variations of rain because of spin-up problems and their coarse spatial and temporal resolution (Antolik, 2000). Moreover, there are some uncertainties about the behaviour of the NWP models in extreme situations (de Bruijn and Brandsma, 2000). Hybrid techniques, combining the benefits of NWP and statistical approaches in a flexible way, are very useful to achieve a good QPF. In this work, a new technique of QPF for Galicia (NW of Spain) is presented. This region has a percentage of rainy days per year greater than 50% with quantities that may cause floods, with human and economical damages. The technique is composed of a NWP model (ARPS) and a statistical downscaling process based on an automated classification scheme of at- mospheric circulation patterns for the Iberian Peninsula (J. Ribalaygua and R. Boren, 1995). Results show that QPF for Galicia is improved using this hybrid technique. [1] Antolik, M.S. 2000 "An Overview of the National Weather Service's centralized statistical quantitative precipitation forecasts". Journal of Hydrology, 239, pp:306- 337. [2] de Bruijn, E.I.F and T. Brandsma "Rainfall prediction for a flooding event in Ireland caused by the remnants of Hurricane Charley". Journal of Hydrology, 239, pp:148-161. [3] Ribalaygua, J. and Boren R. "Clasificación de patrones espaciales de precipitación diaria sobre la España Peninsular". Informes N 3 y 4 del Servicio de Análisis e Investigación del Clima. Instituto Nacional de Meteorología. Madrid. 53 pp.

Human exposure assessment in the near field of GSM base-station antennas using a hybrid finite element/method of moments technique.

Science.gov (United States)

Meyer, Frans J C; Davidson, David B; Jakobus, Ulrich; Stuchly, Maria A

2003-02-01

A hybrid finite-element method (FEM)/method of moments (MoM) technique is employed for specific absorption rate (SAR) calculations in a human phantom in the near field of a typical group special mobile (GSM) base-station antenna. The MoM is used to model the metallic surfaces and wires of the base-station antenna, and the FEM is used to model the heterogeneous human phantom. The advantages of each of these frequency domain techniques are, thus, exploited, leading to a highly efficient and robust numerical method for addressing this type of bioelectromagnetic problem. The basic mathematical formulation of the hybrid technique is presented. This is followed by a discussion of important implementation details-in particular, the linear algebra routines for sparse, complex FEM matrices combined with dense MoM matrices. The implementation is validated by comparing results to MoM (surface equivalence principle implementation) and finite-difference time-domain (FDTD) solutions of human exposure problems. A comparison of the computational efficiency of the different techniques is presented. The FEM/MoM implementation is then used for whole-body and critical-organ SAR calculations in a phantom at different positions in the near field of a base-station antenna. This problem cannot, in general, be solved using the MoM or FDTD due to computational limitations. This paper shows that the specific hybrid FEM/MoM implementation is an efficient numerical tool for accurate assessment of human exposure in the near field of base-station antennas.

A hybrid method based on a new clustering technique and multilayer perceptron neural networks for hourly solar radiation forecasting

International Nuclear Information System (INIS)

Azimi, R.; Ghayekhloo, M.; Ghofrani, M.

2016-01-01

Highlights: • A novel clustering approach is proposed based on the data transformation approach. • A novel cluster selection method based on correlation analysis is presented. • The proposed hybrid clustering approach leads to deep learning for MLPNN. • A hybrid forecasting method is developed to predict solar radiations. • The evaluation results show superior performance of the proposed forecasting model. - Abstract: Accurate forecasting of renewable energy sources plays a key role in their integration into the grid. This paper proposes a hybrid solar irradiance forecasting framework using a Transformation based K-means algorithm, named TB K-means, to increase the forecast accuracy. The proposed clustering method is a combination of a new initialization technique, K-means algorithm and a new gradual data transformation approach. Unlike the other K-means based clustering methods which are not capable of providing a fixed and definitive answer due to the selection of different cluster centroids for each run, the proposed clustering provides constant results for different runs of the algorithm. The proposed clustering is combined with a time-series analysis, a novel cluster selection algorithm and a multilayer perceptron neural network (MLPNN) to develop the hybrid solar radiation forecasting method for different time horizons (1 h ahead, 2 h ahead, …, 48 h ahead). The performance of the proposed TB K-means clustering is evaluated using several different datasets and compared with different variants of K-means algorithm. Solar datasets with different solar radiation characteristics are also used to determine the accuracy and processing speed of the developed forecasting method with the proposed TB K-means and other clustering techniques. The results of direct comparison with other well-established forecasting models demonstrate the superior performance of the proposed hybrid forecasting method. Furthermore, a comparative analysis with the benchmark solar

Current status of hybrid coronary revascularization.

Science.gov (United States)

Jaik, Nikhil P; Umakanthan, Ramanan; Leacche, Marzia; Solenkova, Natalia; Balaguer, Jorge M; Hoff, Steven J; Ball, Stephen K; Zhao, David X; Byrne, John G

2011-10-01

Hybrid coronary revascularization combines coronary artery bypass surgery with percutaneous coronary intervention techniques to treat coronary artery disease. The potential benefits of such a technique are to offer the patients the best available treatments for coronary artery disease while minimizing the risks of the surgery. Hybrid coronary revascularization has resulted in the establishment of new 'hybrid operating suites', which incorporate and integrate the capabilities of a cardiac surgery operating room with that of an interventional cardiology laboratory. Hybrid coronary revascularization has greatly augmented teamwork and cooperation between both fields and has demonstrated encouraging as well as good initial outcomes.

Tax avoidance with cross-border hybrid instruments

DEFF Research Database (Denmark)

Johannesen, Niels

2014-01-01

in the other country with a cross-border hybrid instrument. We then investigate why countries tend to allow the use of hybrid instruments for tax avoidance and show that even if effective anti-avoidance rules are available, there exists a global policy equilibrium in which no country uses such rules......The rules demarcating debt and equity for tax purposes differ between countries, hence the possibility that a hybrid financial instrument is treated as equity in one country and debt in another. This may create a scope for tax avoidance by allowing firms that invest in foreign countries to combine...... tax deductible interest expenses in the host country and tax favored dividend income in the home country. In this paper, we first develop a formal model of hybrid instruments and show that, for a given pair of countries, firms in at least one country and sometimes in both can avoid taxes on investment...

Formalizing Informal Logic

Directory of Open Access Journals (Sweden)

Douglas Walton

2015-12-01

Full Text Available This paper presents a formalization of informal logic using the Carneades Argumentation System (CAS, a formal, computational model of argument that consists of a formal model of argument graphs and audiences. Conflicts between pro and con arguments are resolved using proof standards, such as preponderance of the evidence. CAS also formalizes argumentation schemes. Schemes can be used to check whether a given argument instantiates the types of argument deemed normatively appropriate for the type of dialogue.

Dist-Orc: A Rewriting-based Distributed Implementation of Orc with Formal Analysis

Directory of Open Access Journals (Sweden)

José Meseguer

2010-09-01

Full Text Available Orc is a theory of orchestration of services that allows structured programming of distributed and timed computations. Several formal semantics have been proposed for Orc, including a rewriting logic semantics developed by the authors. Orc also has a fully fledged implementation in Java with functional programming features. However, as with descriptions of most distributed languages, there exists a fairly substantial gap between Orc's formal semantics and its implementation, in that: (i programs in Orc are not easily deployable in a distributed implementation just by using Orc's formal semantics, and (ii they are not readily formally analyzable at the level of a distributed Orc implementation. In this work, we overcome problems (i and (ii for Orc. Specifically, we describe an implementation technique based on rewriting logic and Maude that narrows this gap considerably. The enabling feature of this technique is Maude's support for external objects through TCP sockets. We describe how sockets are used to implement Orc site calls and returns, and to provide real-time timing information to Orc expressions and sites. We then show how Orc programs in the resulting distributed implementation can be formally analyzed at a reasonable level of abstraction by defining an abstract model of time and the socket communication infrastructure, and discuss the assumptions under which the analysis can be deemed correct. Finally, the distributed implementation and the formal analysis methodology are illustrated with a case study.

On the Application of Formal Methods to Clinical Guidelines, an Artificial Intelligence Perspective

NARCIS (Netherlands)

Hommersom, A.J.

2008-01-01

In computer science, all kinds of methods and techniques have been developed to study systems, such as simulation of the behaviour of a system. Furthermore, it is possible to study these systems by proving formal formal properties or by searching through all the possible states that a system may be

Multi-level and hybrid modelling approaches for systems biology.

Science.gov (United States)

Bardini, R; Politano, G; Benso, A; Di Carlo, S

2017-01-01

During the last decades, high-throughput techniques allowed for the extraction of a huge amount of data from biological systems, unveiling more of their underling complexity. Biological systems encompass a wide range of space and time scales, functioning according to flexible hierarchies of mechanisms making an intertwined and dynamic interplay of regulations. This becomes particularly evident in processes such as ontogenesis, where regulative assets change according to process context and timing, making structural phenotype and architectural complexities emerge from a single cell, through local interactions. The information collected from biological systems are naturally organized according to the functional levels composing the system itself. In systems biology, biological information often comes from overlapping but different scientific domains, each one having its own way of representing phenomena under study. That is, the different parts of the system to be modelled may be described with different formalisms. For a model to have improved accuracy and capability for making a good knowledge base, it is good to comprise different system levels, suitably handling the relative formalisms. Models which are both multi-level and hybrid satisfy both these requirements, making a very useful tool in computational systems biology. This paper reviews some of the main contributions in this field.

Industrial applications of formal methods to model, design and analyze computer systems

CERN Document Server

Craigen, Dan

1995-01-01

Formal methods are mathematically-based techniques, often supported by reasoning tools, that can offer a rigorous and effective way to model, design and analyze computer systems. The purpose of this study is to evaluate international industrial experience in using formal methods. The cases selected are representative of industrial-grade projects and span a variety of application domains. The study had three main objectives: · To better inform deliberations within industry and government on standards and regulations; · To provide an authoritative record on the practical experience of formal m

Research of a hybrid undulator

International Nuclear Information System (INIS)

Ma Youwu; Wu Bing; Liu Bo

1995-12-01

A 1.5 m tapered hybrid undulator has been designed and built for mid-infrared free electron laser experiments at CIAE. The undulator utilizes the REC-steel hybrid configuration. The magnetic gap and magnetic field taper can be continuously adjusted. The rms error of the peak field is less than 0.53%. The electron trajectory deviation is around 0.03 mm. The design of undulator, sorting of magnets in hybrid undulator using simulated annealing technique, the motion of electron beam in the ideal and measured magnetic field, magnetic field measurement technique and magnetic field adjustment are described. (6 refs., 10 figs., 1 tab)

Robot-assisted laparoscopic skills development: formal versus informal training.

Science.gov (United States)

Benson, Aaron D; Kramer, Brandan A; Boehler, Margaret; Schwind, Cathy J; Schwartz, Bradley F

2010-08-01

The learning curve for robotic surgery is not completely defined, and ideal training components have not yet been identified. We attempted to determine whether skill development would be accelerated with formal, organized instruction in robotic surgical techniques versus informal practice alone. Forty-three medical students naive to robotic surgery were randomized into two groups and tested on three tasks using the robotic platform. Between the testing sessions, the students were given equally timed practice sessions. The formal training group participated in an organized, formal training session with instruction from an attending robotic surgeon, whereas the informal training group participated in an equally timed unstructured practice session with the robot. The results were compared based on technical score and time to completion of each task. There was no difference between groups in prepractice testing for any task. In postpractice testing, there was no difference between groups for the ring transfer tasks. However, for the suture placement and knot-tying task, the technical score of the formal training group was significantly better than that of the informal training group (p formal training may not be necessary for basic skills, formal instruction for more advanced skills, such as suture placement and knot tying, is important in developing skills needed for effective robotic surgery. These findings may be important in formulating potential skills labs or training courses for robotic surgery.

Specification of real-time automation systems with HybridUML; Spezifikation von Echtzeit-Automatisierungssystemen mit HybridUML

Energy Technology Data Exchange (ETDEWEB)

Berkenkoetter, K.; Bisanz, S.; Hannemann, U.; Peleska, J. [Univ. Bremen (Germany)

2004-07-01

Complex automation systems require specification formalisms supporting the description of real-time requirements with respect to both discrete and time-continuous observables. For this purpose, the authors have designed the HybridUML specification language. Discrete events, communication, and variable assignments are specified by state machines, timers, and invariant conditions. The time-continuous aspects of system behaviour are described by associating differential equations or time-dependent algebraic conditions with system states. The complexity of large systems is controlled by decomposing the specification into parallel components and hierarchical state machines. Instead of inventing a new language syntax, HybridUML is represented as a profile of the Unified Modeling Language UML 2.0. This allows to re-use the syntactic framework of well-accepted graphical UML constructs and development support provided by various UML case tools. The profile is associated with a precise language semantics linking unambiguous meaning to all HybridUML specifications. As a consequence, HybridUML specifications can be compiled into executable code which is suitable for execution in hard realtime on multi-processor computers. This serves both for the development of automation systems and for specification-based testing in real-time. This paper contains an introduction to HybridUML which is illustrated by an example from the field of automated train control. (orig.)

Turchin's Relation for Call-by-Name Computations: A Formal Approach

OpenAIRE

Antonina Nepeivoda

2016-01-01

Supercompilation is a program transformation technique that was first described by V. F. Turchin in the 1970s. In supercompilation, Turchin's relation as a similarity relation on call-stack configurations is used both for call-by-value and call-by-name semantics to terminate unfolding of the program being transformed. In this paper, we give a formal grammar model of call-by-name stack behaviour. We classify the model in terms of the Chomsky hierarchy and then formally prove that Turchin's rel...

Enhancement of Twins Fetal ECG Signal Extraction Based on Hybrid Blind Extraction Techniques

Directory of Open Access Journals (Sweden)

Ahmed Kareem Abdullah

2017-07-01

Full Text Available ECG machines are noninvasive system used to measure the heartbeat signal. It’s very important to monitor the fetus ECG signals during pregnancy to check the heat activity and to detect any problem early before born, therefore the monitoring of ECG signals have clinical significance and importance. For multi-fetal pregnancy case the classical filtering algorithms are not sufficient to separate the ECG signals between mother and fetal. In this paper the mixture consists of mixing from three ECG signals, the first signal is the mother ECG (M-ECG signal, second signal the Fetal-1 ECG (F1-ECG, and third signal is the Fetal-2 ECG (F2-ECG, these signals are extracted based on modified blind source extraction (BSE techniques. The proposed work based on hybridization between two BSE techniques to ensure that the extracted signals separated well. The results demonstrate that the proposed work very efficiently to extract the useful ECG signals

Sb(III)-Imprinted Organic-Inorganic Hybrid Sorbent Prepared by Hydrothermal-Assisted Surface Imprinting Technique for Selective Adsorption of Sb(III)

Science.gov (United States)

Zhang, Dan; Zhao, Yue; Xu, Hong-Bo

2018-03-01

Sb(III)-imprinted organic-inorganic hybrid sorbent was prepared by hydrothermal-assisted surface imprinting technique and was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy coupled to an energy dispersive spectrometer and N2 adsorption/desorption isotherms. Hydrothermal-assisted process can improve the selectivity of the Sb(III)-imprinted hybrid sorbent for Sb(III) due to stable control of temperature and pressure. The Sb(III)-imprinted hybrid sorbent IIS indicated higher selectivity for Sb(III), had high static adsorption capacity of 37.3 mg g-1 for Sb(III), displayed stable adsorption capacity in pH range from 4 to 8, reached an rapid adsorption equilibrium within 30 min. According to the correlation coefficient ( r 2 > 0.99), the experimental data fitted better the pseudo-second-order kinetic model and Langmuir equilibrium isotherm.

Investigation of kinetics and thermodynamics of DNA hybridization by means of 2-D fluorescence spectroscopy and soft/hard modeling techniques

Energy Technology Data Exchange (ETDEWEB)

Ebrahimi, Sara; Kompany-Zareh, Mohsen, E-mail: kmpz@dr.com

2016-02-04

Reversible hybridization reaction plays a key role in fundamental biological processes, in many laboratory techniques, and also in DNA based sensing devices. Comprehensive investigation of this process is, therefore, essential for the development of more sophisticated applications. Kinetics and thermodynamics of the hybridization reaction, as a second order process, are systematically investigated with the aid of the soft and hard chemometric methods. Labeling two complementary 21 mer DNA single strands with FAM and Texas red fluorophores, enabled recording of the florescence excitation−emission matrices during the experiments which led to three-way data sets. The presence of fluorescence resonance energy transfer in excitation and emission modes and the closure in concentration mode, made the three-way data arrays rank deficient. To acquire primary chemical information, restricted Tucker3 as a soft method was employed. Herein a model-based method, hard restricted trilinear decomposition, is introduced for in depth analysis of rank deficient three-way data sets. By employing proposed hard method, the nonlinear model parameters as well as the correct profiles could be estimated. In addition, a simple constraint is presented to extract chemically reasonable output profiles regarding the core elements of restricted Tucker3 model. - Highlights: • Hard restricted trilinear decomposition (HrTD) was introduced for model-based analysis of three-way rank deficient data. • DNA hybridization was investigated by two-dimensional fluorescence spectroscopy and soft/hard multi-way techniques. • Restricted Tucker3 analysis enabled accurate estimation of pure FRET profiles in the hybridized form. • HrTD was successfully employed to estimate kinetic and equilibrium parameters of DNA hybridization system. • The performance of the proposed methods in response to different physical stimuli was successfully evaluated.

A hybrid SEA/modal technique for modeling structural-acoustic interior noise in rotorcraft.

Science.gov (United States)

Jayachandran, V; Bonilha, M W

2003-03-01

This paper describes a hybrid technique that combines Statistical Energy Analysis (SEA) predictions for structural vibration with acoustic modal summation techniques to predict interior noise levels in rotorcraft. The method was applied for predicting the sound field inside a mock-up of the interior panel system of the Sikorsky S-92 helicopter. The vibration amplitudes of the frame and panel systems were predicted using a detailed SEA model and these were used as inputs to the model of the interior acoustic space. The spatial distribution of the vibration field on individual panels, and their coupling to the acoustic space were modeled using stochastic techniques. Leakage and nonresonant transmission components were accounted for using space-averaged values obtained from a SEA model of the complete structural-acoustic system. Since the cabin geometry was quite simple, the modeling of the interior acoustic space was performed using a standard modal summation technique. Sound pressure levels predicted by this approach at specific microphone locations were compared with measured data. Agreement within 3 dB in one-third octave bands above 40 Hz was observed. A large discrepancy in the one-third octave band in which the first acoustic mode is resonant (31.5 Hz) was observed. Reasons for such a discrepancy are discussed in the paper. The developed technique provides a method for modeling helicopter cabin interior noise in the frequency mid-range where neither FEA nor SEA is individually effective or accurate.

Hybrid soft computing approaches research and applications

CERN Document Server

Dutta, Paramartha; Chakraborty, Susanta

2016-01-01

The book provides a platform for dealing with the flaws and failings of the soft computing paradigm through different manifestations. The different chapters highlight the necessity of the hybrid soft computing methodology in general with emphasis on several application perspectives in particular. Typical examples include (a) Study of Economic Load Dispatch by Various Hybrid Optimization Techniques, (b) An Application of Color Magnetic Resonance Brain Image Segmentation by ParaOptiMUSIG activation Function, (c) Hybrid Rough-PSO Approach in Remote Sensing Imagery Analysis,  (d) A Study and Analysis of Hybrid Intelligent Techniques for Breast Cancer Detection using Breast Thermograms, and (e) Hybridization of 2D-3D Images for Human Face Recognition. The elaborate findings of the chapters enhance the exhibition of the hybrid soft computing paradigm in the field of intelligent computing.

Patterns of cytosine methylation in an elite rice hybrid and its parental lines, detected by a methylation-sensitive amplification polymorphism technique.

Science.gov (United States)

Xiong, L Z; Xu, C G; Saghai Maroof, M A; Zhang, Q

1999-04-01

DNA methylation is known to play an important role in the regulation of gene expression in eukaryotes. In this study, we assessed the extent and pattern of cytosine methylation in the rice genome, using the technique of methylation-sensitive amplified polymorphism (MSAP), which is a modification of the amplified fragment length polymorphism (AFLP) method that makes use of the differential sensitivity of a pair of isoschizomers to cytosine methylation. The tissues assayed included seedlings and flag leaves of an elite rice hybrid, Shanyou 63, and the parental lines Zhenshan 97 and Minghui 63. In all, 1076 fragments, each representing a recognition site cleaved by either or both of the isoschizomers, were amplified using 16 pairs of selective primers. A total of 195 sites were found to be methylated at cytosines in one or both parents, and the two parents showed approximately the same overall degree of methylation (16.3%), as revealed by the incidence of differential digestion by the isoschizomers. Four classes of patterns were identified in a comparative assay of cytosine methylation in the parents and hybrid; increased methylation was detected in the hybrid compared to the parents at some of the recognition sites, while decreased methylation in the hybrid was detected at other sites. A small proportion of the sites was found to be differentially methylated in seedlings and flag leaves; DNA from young seedlings was methylated to a greater extent than that from flag leaves. Almost all of the methylation patterns detected by MSAP could be confirmed by Southern analysis using the isolated amplified fragments as probes. The results clearly demonstrate that the MSAP technique is highly efficient for large-scale detection of cytosine methylation in the rice genome. We believe that the technique can be adapted for use in other plant species.

Formal specification and animation of a water level monitoring system

International Nuclear Information System (INIS)

Jackson, P.S.; Stokes, P.A.

1993-03-01

This report describes the Vienna Development Method (VDM), which is a formal method for software specification and development. VDM evolved out of attempts to use mathematics in programming language specifications in order to avoid ambiguities in specifications written in natural language. This report also describes the use of VDM for a real-time application, where it is used to formally specify the requirements of a water level monitoring system. The procedures and techniques used to produce an executable form (animation) of the specification are covered. (Author)

Formal Model-Driven Engineering: Generating Data and Behavioural Components

Directory of Open Access Journals (Sweden)

Chen-Wei Wang

2012-12-01

Full Text Available Model-driven engineering is the automatic production of software artefacts from abstract models of structure and functionality. By targeting a specific class of system, it is possible to automate aspects of the development process, using model transformations and code generators that encode domain knowledge and implementation strategies. Using this approach, questions of correctness for a complex, software system may be answered through analysis of abstract models of lower complexity, under the assumption that the transformations and generators employed are themselves correct. This paper shows how formal techniques can be used to establish the correctness of model transformations used in the generation of software components from precise object models. The source language is based upon existing, formal techniques; the target language is the widely-used SQL notation for database programming. Correctness is established by giving comparable, relational semantics to both languages, and checking that the transformations are semantics-preserving.

Hybrid Simulation of Composite Structures

DEFF Research Database (Denmark)

Høgh, Jacob Herold

experiment. The technique has primarily been used within earthquake engineering but many other fields of engineering have utilized the method with benefit. However, these previous efforts have focused on structures with a simple boundary between the numerical and physical substructure i.e. few degrees...... the transfer system and the control and monitoring techniques in the shared boundary is therefore a key issue in this type of hybrid simulation. During the research, hybrid simulation platforms have been programmed capable of running on different time scales with advanced control and monitoring techniques...

Henkin and Hybrid Logic

DEFF Research Database (Denmark)

Blackburn, Patrick Rowan; Huertas, Antonia; Manzano, Maria

2014-01-01

Leon Henkin was not a modal logician, but there is a branch of modal logic that has been deeply influenced by his work. That branch is hybrid logic, a family of logics that extend orthodox modal logic with special proposition symbols (called nominals) that name worlds. This paper explains why...... Henkin’s techniques are so important in hybrid logic. We do so by proving a completeness result for a hybrid type theory called HTT, probably the strongest hybrid logic that has yet been explored. Our completeness result builds on earlier work with a system called BHTT, or basic hybrid type theory...... is due to the first-order perspective, which lies at the heart of Henin’s best known work and hybrid logic....

Hybrid-Logical Reasoning in the Smarties and Sally-Anne Tasks

DEFF Research Database (Denmark)

Braüner, Torben

2014-01-01

The main aim of the present paper is to use a proof system for hybrid modal logic to formalize what are called false-belief tasks in cognitive psychology, thereby investigating the interplay between cognition and logical reasoning about belief. We consider two different versions of the Smarties...

Investigation of Steel Surfaces Treated by a Hybrid Ion Implantation Technique

International Nuclear Information System (INIS)

Reuther, H.; Richter, E.; Prokert, F.; Ueda, M.; Beloto, A. F.; Gomes, G. F.

2004-01-01

Implantation of nitrogen ions into stainless steel in combination with oxidation often results in a decrease or even complete removal of the chromium in the nitrogen containing outermost surface layer. While iron nitrides can be formed easily by this method, due to the absence of chromium, the formation of chromium nitrides is impossible and the beneficial influence of chromium in the steel for corrosion resistance cannot be used. To overcome this problem we use the following hybrid technique. A thin chromium layer is deposited on steel and subsequently implanted with nitrogen ions. Chromium can be implanted by recoil into the steel surface and thus the formation of iron/chromium nitrides should be possible. Both beam line ion implantation and plasma immersion ion implantation are used. Due to the variation of the process parameters, different implantation profiles and different compounds are produced. The produced layers are characterized by Auger electron spectroscopy, conversion electron Moessbauer spectroscopy and X-ray diffraction. The obtained results show that due to the variation of the implantation parameters, the formation of iron/chromium nitrides can be achieved and that plasma immersion ion implantation is the most suitable technique for the enrichment of chromium in the outermost surface layer of the steel when compared to the beam line implantation.

Hybrid methods to represent incomplete and uncertain information

Energy Technology Data Exchange (ETDEWEB)

Joslyn, C. [NASA Goddard Space Flight Center, Greenbelt, MD (United States)

1996-12-31

Decision making is cast in the semiotic context of perception, decision, and action loops. Towards the goal of properly grounding hybrid representations of information and uncertainty from this semiotic perspective, we consider the roles of and relations among the mathematical components of General Information Theory (GIT), particularly among fuzzy sets, possibility theory, probability theory, and random sets. We do so by using a clear distinction between the syntactic, mathematical formalism and the semantic domains of application of each of these fields, placing the emphasis on available measurement and action methods appropriate for each formalism, to which and from which the decision-making process flows.

Unified formulation for inhomogeneity-driven instabilities in the lower-hybrid range

International Nuclear Information System (INIS)

Silveira, O.J.G.; Ziebell, L.F.; Gaelzer, R.; Yoon, Peter H.

2002-01-01

A local dispersion relation that describes inhomogeneity-driven instabilities in the lower-hybrid range is derived following a procedure that correctly describes energy exchange between waves and particles in inhomogeneous media, correcting some inherent ambiguities associated with the standard formalism found in the literature. Numerical solutions of this improved dispersion relation show that it constitutes a unified formulation for the instabilities in the lower-hybrid range, describing the so-called modified two-stream instability, excited by the ion cross-field drift, including the ion Weibel instability, and also describing the lower-hybrid drift instability, which is due to inhomogeneity effects on the electron population

Qualitative simulation in formal process modelling

International Nuclear Information System (INIS)

Sivertsen, Elin R.

1999-01-01

In relation to several different research activities at the OECD Halden Reactor Project, the usefulness of formal process models has been identified. Being represented in some appropriate representation language, the purpose of these models is to model process plants and plant automatics in a unified way to allow verification and computer aided design of control strategies. The present report discusses qualitative simulation and the tool QSIM as one approach to formal process models. In particular, the report aims at investigating how recent improvements of the tool facilitate the use of the approach in areas like process system analysis, procedure verification, and control software safety analysis. An important long term goal is to provide a basis for using qualitative reasoning in combination with other techniques to facilitate the treatment of embedded programmable systems in Probabilistic Safety Analysis (PSA). This is motivated from the potential of such a combination in safety analysis based on models comprising both software, hardware, and operator. It is anticipated that the research results from this activity will benefit V and V in a wide variety of applications where formal process models can be utilized. Examples are operator procedures, intelligent decision support systems, and common model repositories (author) (ml)

Formality in Brackets

DEFF Research Database (Denmark)

Garsten, Christina; Nyqvist, Anette

Ethnographic work in formal organizations involves learning to recognize the many layers of front stage and back stage of organized life, and to bracket formality. It means to be alert to the fact that what is formal and front stage for one some actors, and in some situations, may in fact be back...... stage and informal for others. Walking the talk, donning the appropriate attire, wearing the proper suit, may be part of what is takes to figure out the code of formal organizational settings – an entrance ticket to the backstage, as it were. Oftentimes, it involves a degree of mimicry, of ‘following...... suits’ (Nyqvist 2013), and of doing ‘ethnography by failure’ (Garsten 2013). In this paper, we explore the layers of informality and formality in our fieldwork experiences among financial investors and policy experts, and discuss how to ethnographically represent embodied fieldwork practices. How do we...

Combining Formal Logic and Machine Learning for Sentiment Analysis

DEFF Research Database (Denmark)

Petersen, Niklas Christoffer; Villadsen, Jørgen

2014-01-01

This paper presents a formal logical method for deep structural analysis of the syntactical properties of texts using machine learning techniques for efficient syntactical tagging. To evaluate the method it is used for entity level sentiment analysis as an alternative to pure machine learning...

The application of fluorescence in situ hybridization (FISH technique for studying the microbial communities in intestinal tissues of white shrimp (Penaeus vannamei

Directory of Open Access Journals (Sweden)

Supamattaya, K.

2005-02-01

Full Text Available Fluorescence in situ hybridization technique is very useful for the evaluation of microbial communities in various environments. It is possible to apply this technique to study the intestinal microflora in white shrimp (Penaeus vannamei. Different fixatives and storage temperature were tested in this technique. It was found that fixation with 10% buffered formalin for 12 hours and changed to 70% ethanol shown positive results when compared to the fixation with Davidson's fixative or RF fixative. The best signaling was obtainedfrom the samples which were stored in -20ºC. By using the DNA probe targeted to the Eubacteria domain (EUB338 probe, 5′-GCT GCC TCC CGT AGG AGT-3′ labeled with fluorescein as a hybridizing probe, it was found that most intestinal microflora were aggregated with the intestinal contents, or dispersed in the lumen. There was not evidence of the attachment of the microflora with the intestinal epithelium in this study.

Quantum chemical approaches: semiempirical molecular orbital and hybrid quantum mechanical/molecular mechanical techniques.

Science.gov (United States)

Bryce, Richard A; Hillier, Ian H

2014-01-01

The use of computational quantum chemical methods to aid drug discovery is surveyed. An overview of the various computational models spanning ab initio, density function theory, semiempirical molecular orbital (MO), and hybrid quantum mechanical (QM)/molecular mechanical (MM) methods is given and their strengths and weaknesses are highlighted, focussing on the challenge of obtaining the accuracy essential for them to make a meaningful contribution to drug discovery. Particular attention is given to hybrid QM/MM and semiempirical MO methods which have the potential to yield the necessary accurate predictions of macromolecular structure and reactivity. These methods are shown to have advanced the study of many aspects of substrate-ligand interactions relevant to drug discovery. Thus, the successful parametrization of semiempirical MO methods and QM/MM methods can be used to model noncovalent substrate-protein interactions, and to lead to improved scoring functions. QM/MM methods can be used in crystal structure refinement and are particularly valuable for modelling covalent protein-ligand interactions and can thus aid the design of transition state analogues. An extensive collection of examples from the areas of metalloenzyme structure, enzyme inhibition, and ligand binding affinities and scoring functions are used to illustrate the power of these techniques.

Hybrid real-code ant colony optimisation for constrained mechanical design

Science.gov (United States)

Pholdee, Nantiwat; Bureerat, Sujin

2016-01-01

This paper proposes a hybrid meta-heuristic based on integrating a local search simplex downhill (SDH) method into the search procedure of real-code ant colony optimisation (ACOR). This hybridisation leads to five hybrid algorithms where a Monte Carlo technique, a Latin hypercube sampling technique (LHS) and a translational propagation Latin hypercube design (TPLHD) algorithm are used to generate an initial population. Also, two numerical schemes for selecting an initial simplex are investigated. The original ACOR and its hybrid versions along with a variety of established meta-heuristics are implemented to solve 17 constrained test problems where a fuzzy set theory penalty function technique is used to handle design constraints. The comparative results show that the hybrid algorithms are the top performers. Using the TPLHD technique gives better results than the other sampling techniques. The hybrid optimisers are a powerful design tool for constrained mechanical design problems.

Software Formal Inspections Guidebook

Science.gov (United States)

1993-01-01

The Software Formal Inspections Guidebook is designed to support the inspection process of software developed by and for NASA. This document provides information on how to implement a recommended and proven method for conducting formal inspections of NASA software. This Guidebook is a companion document to NASA Standard 2202-93, Software Formal Inspections Standard, approved April 1993, which provides the rules, procedures, and specific requirements for conducting software formal inspections. Application of the Formal Inspections Standard is optional to NASA program or project management. In cases where program or project management decide to use the formal inspections method, this Guidebook provides additional information on how to establish and implement the process. The goal of the formal inspections process as documented in the above-mentioned Standard and this Guidebook is to provide a framework and model for an inspection process that will enable the detection and elimination of defects as early as possible in the software life cycle. An ancillary aspect of the formal inspection process incorporates the collection and analysis of inspection data to effect continual improvement in the inspection process and the quality of the software subjected to the process.

Turchin's Relation for Call-by-Name Computations: A Formal Approach

Directory of Open Access Journals (Sweden)

Antonina Nepeivoda

2016-07-01

Full Text Available Supercompilation is a program transformation technique that was first described by V. F. Turchin in the 1970s. In supercompilation, Turchin's relation as a similarity relation on call-stack configurations is used both for call-by-value and call-by-name semantics to terminate unfolding of the program being transformed. In this paper, we give a formal grammar model of call-by-name stack behaviour. We classify the model in terms of the Chomsky hierarchy and then formally prove that Turchin's relation can terminate all computations generated by the model.

Formal Verification of Continuous Systems

DEFF Research Database (Denmark)

Sloth, Christoffer

2012-01-01

and the verification procedures should be algorithmically synthesizable. Autonomous control plays an important role in many safety-critical systems. This implies that a malfunction in the control system can have catastrophic consequences, e.g., in space applications where a design flaw can result in large economic...... losses. Furthermore, a malfunction in the control system of a surgical robot may cause death of patients. The previous examples involve complex systems that are required to operate according to complex specifications. The systems cannot be formally verified by modern verification techniques, due...

A transformation framework for the compositional interchange format for hybrid systems

NARCIS (Netherlands)

Hendriks, D.; Schiffelers, R.R.H.; Hüfner, Martin; Sonntag, Christian

2012-01-01

The purpose of the Compositional Interchange Format for hybrid systems (CIF) is to establish inter-operability of a wide range of tools by means of model transformations - using the CIF as intermediate, the implementation of many bi-lateral translators between specific formalisms can be avoided.

A FORMALISM FOR FUZZY BUSINESS RULES

Directory of Open Access Journals (Sweden)

Vasile Mazilescu

2015-05-01

Full Text Available The aim of this paper is to provide a formalism for fuzzy rule bases, included in our prototype system FUZZY_ENTERPRISE. This framework can be used in Distributed Knowledge Management Systems (DKMSs, real-time interdisciplinary decision making systems, that often require increasing technical support to high quality decisions in a timely manner. The language of the first-degree predicates facilitates the formulation of complex knowledge in a rigorous way, imposing appropriate reasoning techniques.

Experiences from the formal specification of the integration platform and the synthesis of SDT with the software bus

International Nuclear Information System (INIS)

Thunem, Harald; Mohn, Peter; Sandmark, Haakon; Stoelen, Ketil

1999-04-01

The three year programme 1997-1999 for the OECD Halden Reactor Project (HRP) identifies the need to gain experience from applying formal techniques in real-life system developments. This motivated the initiation of the HRP research activity Integration of Formal Specification in the Development of HAMMLAB 2000 (INT-FS). The principal objective was to experiment with formal techniques in system developments at the HRP; in particular, system developments connected to HAMMLAB 2000 - the computerised laboratory for man-machine-interaction experiments currently under construction. It was hoped that this experimentation with formal techniques should result in a better understanding of how such techniques should be utilised in a more industrial setting. To obtain more knowledge with respect to the practical effects and consequences of an increased level of formalization was another objective. This report summarises experiences, results and conclusions from a pre-study addressing INT-FS related issues connected to the development of the HAMMLAB 2000 Integration Platform (IP). The report starts by giving a brief overview of the IP. Then it describes and summarises experiences from the formalization of a top-level requirements specification for the IP. Finally, it discusses various approaches for the integration of applications generated automatically through the CASE-tool SDT and the Software Bus on which the communication within HAMMLAB 2000 will be based. The report concludes that the selected formalisms and tools are well-suited to describe IP-like systems. The report also concludes that the integration of SDT applications with the Software Bus will not be a major obstacle, and finally that a monitoring component for the IP is well-suited for development within INT-FS (author) (ml)

Formal, Non-Formal and Informal Learning in the Sciences

Science.gov (United States)

Ainsworth, Heather L.; Eaton, Sarah Elaine

2010-01-01

This research report investigates the links between formal, non-formal and informal learning and the differences between them. In particular, the report aims to link these notions of learning to the field of sciences and engineering in Canada and the United States, including professional development of adults working in these fields. It offers…

Can massive primordial black holes be produced in mild waterfall hybrid inflation?

International Nuclear Information System (INIS)

Kawasaki, Masahiro; Tada, Yuichiro

2016-01-01

We studied the possibility whether the massive primordial black holes (PBHs) surviving today can be produced in hybrid inflation. Though it is of great interest since such PBHs can be the candidate for dark matter or seeds of the supermassive black holes in galaxies, there have not been quantitatively complete works yet because of the non-perturbative behavior around the critical point of hybrid inflation. Therefore, combining the stochastic and δ N formalism, we numerically calculated the curvature perturbations in a non-perturbative way and found, without any specific assumption of the types of hybrid inflation, PBHs are rather overproduced when the waterfall phase of hybrid inflation continues so long that the PBH scale is well enlarged and the corresponding PBH mass becomes sizable enough.

Engine Downsizing and Electric Hybridization Under Consideration of Cost and Drivability Réduction de taille moteur et hybridation électrique avec considérations de coût et de performance de conduite

Directory of Open Access Journals (Sweden)

Ebbesen S.

2012-09-01

Full Text Available Automotive manufacturers of hybrid electric vehicles are confronted with the multi-objective non-trivial optimization problem of engine downsizing and electric hybridization under consideration of cost and drivability. Solutions to this sizing problem are typically reached by heuristic design methodologies. However, a design approach formalized in an optimization theoretical setting is necessary in order to obtain globally optimal solutions. In this paper, we present a framework for optimal sizing of hybrid electric drivetrain components. This framework is cast within standard optimization theory. Moreover, it is flexible in order to easily include any number of objectives, such as minimization of fuel consumption, cost of hybridization, emission levels and (or maximization of acceleration performance. Based on this framework, we demonstrate a number of techniques and tools to analyze, accept, improve, or reject the proposed solutions to the optimal sizing problem. Les constructeurs de véhicules automobiles électriques hybrides sont confrontés au problème délicat de l’optimisation multiobjectifs de la réduction de taille moteur et de l’hybridation électrique, tout en considérant le coût et la performance de conduite. Les solutions à ce problème de dimensionnement moteur sont généralement obtenues par des méthodes de conception de type heuristique. Cependant, afin d’obtenir des solutions optimales globales, il est nécessaire de recourir aux formalismes théoriques d’optimisation. Dans cet article, nous présentons une méthodologie de travail, qui s’appuie sur les théories classiques d’optimisation, pour le dimensionnement optimal des composants d’une chaîne de traction électrique hybride. En outre, cette approche est flexible afin de permettre l’ajout d’un nombre quelconque d’objectifs, comme la minimisation de la consommation d’essence, le coût de l’hybridation, les niveaux d’émission et (ou la

Cardiac hybrid imaging

Energy Technology Data Exchange (ETDEWEB)

Gaemperli, Oliver [University Hospital Zurich, Cardiac Imaging, Zurich (Switzerland); University Hospital Zurich, Nuclear Cardiology, Cardiovascular Center, Zurich (Switzerland); Kaufmann, Philipp A. [University Hospital Zurich, Cardiac Imaging, Zurich (Switzerland); Alkadhi, Hatem [University Hospital Zurich, Institute of Diagnostic and Interventional Radiology, Zurich (Switzerland)

2014-05-15

Hybrid cardiac single photon emission computed tomography (SPECT)/CT imaging allows combined assessment of anatomical and functional aspects of cardiac disease. In coronary artery disease (CAD), hybrid SPECT/CT imaging allows detection of coronary artery stenosis and myocardial perfusion abnormalities. The clinical value of hybrid imaging has been documented in several subsets of patients. In selected groups of patients, hybrid imaging improves the diagnostic accuracy to detect CAD compared to the single imaging techniques. Additionally, this approach facilitates functional interrogation of coronary stenoses and guidance with regard to revascularization procedures. Moreover, the anatomical information obtained from CT coronary angiography or coronary artery calcium scores (CACS) adds prognostic information over perfusion data from SPECT. The use of cardiac hybrid imaging has been favoured by the dissemination of dedicated hybrid systems and the release of dedicated image fusion software, which allow simple patient throughput for hybrid SPECT/CT studies. Further technological improvements such as more efficient detector technology to allow for low-radiation protocols, ultra-fast image acquisition and improved low-noise image reconstruction algorithms will be instrumental to further promote hybrid SPECT/CT in research and clinical practice. (orig.)

Hybrid intelligent engineering systems

CERN Document Server

Jain, L C; Adelaide, Australia University of

1997-01-01

This book on hybrid intelligent engineering systems is unique, in the sense that it presents the integration of expert systems, neural networks, fuzzy systems, genetic algorithms, and chaos engineering. It shows that these new techniques enhance the capabilities of one another. A number of hybrid systems for solving engineering problems are presented.

Fear of the Formal

DEFF Research Database (Denmark)

du Gay, Paul; Lopdrup-Hjorth, Thomas

Over recent decades, institutions exhibiting high degrees of formality have come in for severe criticism. From the private to the public sector, and across a whole spectrum of actors spanning from practitioners to academics, formal organization is viewed with increasing doubt and skepticism....... In a “Schumpetarian world” (Teece et al., 1997: 509) of dynamic competition and incessant reform, formal organization appears as well suited to survival as a fish out of water. Indeed, formal organization, and its closely overlapping semantic twin bureaucracy, are not only represented as ill suited to the realities...... is that formal organization is an obstacle to be overcome. For that very reason, critics, intellectuals and reformers alike have urged public and private organizations to break out of the stifling straightjacket of formality, to dispense with bureaucracy, and to tear down hierarchies. This could either be done...

Memory function formalism applied to electronic transport in disordered systems

International Nuclear Information System (INIS)

Cunha Lima, I.C. da

1984-01-01

Memory function formalism is briefly reviewed and applied to electronic transport using the projection operator technique. The resistivity of a disordered 2-D electron gas under strong magnetic field is obtained in terms of force-force correlation function. (Author) [pt

RTL2RTL Formal Equivalence: Boosting the Design Confidence

Directory of Open Access Journals (Sweden)

M V Achutha Kiran Kumar

2014-07-01

Full Text Available Increasing design complexity driven by feature and performance requirements and the Time to Market (TTM constraints force a faster design and validation closure. This in turn enforces novel ways of identifying and debugging behavioral inconsistencies early in the design cycle. Addition of incremental features and timing fixes may alter the legacy design behavior and would inadvertently result in undesirable bugs. The most common method of verifying the correctness of the changed design is to run a dynamic regression test suite before and after the intended changes and compare the results, a method which is not exhaustive. Modern Formal Verification (FV techniques involving new methods of proving Sequential Hardware Equivalence enabled a new set of solutions for the given problem, with complete coverage guarantee. Formal Equivalence can be applied for proving functional integrity after design changes resulting from a wide variety of reasons, ranging from simple pipeline optimizations to complex logic redistributions. We present here our experience of successfully applying the RTL to RTL (RTL2RTL Formal Verification across a wide spectrum of problems on a Graphics design. The RTL2RTL FV enabled checking the design sanity in a very short time, thus enabling faster and safer design churn. The techniques presented in this paper are applicable to any complex hardware design.

Necessity of Integral Formalism

International Nuclear Information System (INIS)

Tao Yong

2011-01-01

To describe the physical reality, there are two ways of constructing the dynamical equation of field, differential formalism and integral formalism. The importance of this fact is firstly emphasized by Yang in case of gauge field [Phys. Rev. Lett. 33 (1974) 445], where the fact has given rise to a deeper understanding for Aharonov-Bohm phase and magnetic monopole [Phys. Rev. D 12 (1975) 3845]. In this paper we shall point out that such a fact also holds in general wave function of matter, it may give rise to a deeper understanding for Berry phase. Most importantly, we shall prove a point that, for general wave function of matter, in the adiabatic limit, there is an intrinsic difference between its integral formalism and differential formalism. It is neglect of this difference that leads to an inconsistency of quantum adiabatic theorem pointed out by Marzlin and Sanders [Phys. Rev. Lett. 93 (2004) 160408]. It has been widely accepted that there is no physical difference of using differential operator or integral operator to construct the dynamical equation of field. Nevertheless, our study shows that the Schrödinger differential equation (i.e., differential formalism for wave function) shall lead to vanishing Berry phase and that the Schrödinger integral equation (i.e., integral formalism for wave function), in the adiabatic limit, can satisfactorily give the Berry phase. Therefore, we reach a conclusion: There are two ways of describing physical reality, differential formalism and integral formalism; but the integral formalism is a unique way of complete description. (general)

A fresh recipe for designers: HCI approach to explore the nexus between design techniques and formal methods in software development

Directory of Open Access Journals (Sweden)

Julian Galindo Losada

2016-11-01

Full Text Available Emerging companies involved in design and implementation of innovative products demand multidisciplinary teams to be competitive in the market. This need mainly exposes designers to extend their knowledge not only in User Interface elements of the design process but also in software methodologies to cover the lack of resources and expertise in start-ups. It raises the question of how designers can line up HCI techniques with best practices in software development while preserving usability and easy-to-use principles. To explore this gap, this paper proposes an approach which combines existing technology and methods by studying the nexus between HCI prototyping and software engineering. The approach is applied into a case study in the design of a virtual shop harmonizing the use of storyboards and the spiral. A comprehensive analysis is performed by using a Technology acceptance model (TAM regarding with two variables: usability and easy-to-use. The present finding underlines the positive integration of HCI techniques and formal methods without compromising user satisfaction with a potential benefit for small companies in a formation stage.

Analysis of Non-binary Hybrid LDPC Codes

OpenAIRE

Sassatelli, Lucile; Declercq, David

2008-01-01

In this paper, we analyse asymptotically a new class of LDPC codes called Non-binary Hybrid LDPC codes, which has been recently introduced. We use density evolution techniques to derive a stability condition for hybrid LDPC codes, and prove their threshold behavior. We study this stability condition to conclude on asymptotic advantages of hybrid LDPC codes compared to their non-hybrid counterparts.

Pragmatics for formal semantics

DEFF Research Database (Denmark)

Danvy, Olivier

2011-01-01

This tech talk describes how to write and how to inter-derive formal semantics for sequential programming languages. The progress reported here is (1) concrete guidelines to write each formal semantics to alleviate their proof obligations, and (2) simple calculational tools to obtain a formal...

Industrial use of formal methods formal verification

CERN Document Server

Boulanger, Jean-Louis

2012-01-01

At present the literature gives students and researchers of the very general books on the formal technics. The purpose of this book is to present in a single book, a return of experience on the used of the "formal technics" (such proof and model-checking) on industrial examples for the transportation domain. This book is based on the experience of people which are completely involved in the realization and the evaluation of safety critical system software based.  The implication of the industrialists allows to raise the problems of confidentiality which could appear and so allow

3D hybrid profile order technique in a single breath-hold 3D T2-weighted fast spin-echo sequence: Usefulness in diagnosis of small liver lesions.

Science.gov (United States)

Hirata, Kenichiro; Nakaura, Takeshi; Okuaki, Tomoyuki; Tsuda, Noriko; Taguchi, Narumi; Oda, Seitaro; Utsunomiya, Daisuke; Yamashita, Yasuyuki

2018-01-01

We compared the efficacy of three-dimensional (3D) isotropic T2-weighted fast spin-echo imaging using a 3D hybrid profile order technique with a single-breath-hold (3D-Hybrid BH) with a two-dimensional (2D) T2-weighted fast spin-echo conventional respiratory-gated (2D-Conventional RG) technique for visualising small liver lesions. This study was approved by our institutional review board. The requirement to obtain written informed consent was waived. Fifty patients with small (≤15mm) hepatocellular carcinomas (HCC) (n=26), or benign cysts (n=24), had undergone hepatic MRI including both 2D-Conventional RG and 3D-Hybrid BH. We calculated the signal-to-noise ratio (SNR) and tumour-to-liver contrast (TLC). The diagnostic performance of the two protocols was analysed. The image acquisition time was 89% shorter with the 3D-Hybrid BH than with 2D-Conventional RG. There was no significant difference in the SNR between the two protocols. The area under the curve (AUC) of the TLC was significantly higher on 3D-Hybrid BH than on 2D-Conventional RG. The 3D-Hybrid BH sequence significantly improved diagnostic performance for small liver lesions with a shorter image acquisition time without sacrificing accuracy. Copyright © 2017. Published by Elsevier B.V.

NEURAL NETWORKS CONTROL OF THE HYBRID POWER UNIT BASED ON THE METHOD OF ADAPTIVE CRITICS

Directory of Open Access Journals (Sweden)

S. Serikov

2012-01-01

Full Text Available The formal statement of the optimization problem of hybrid vehicle power unit control is given. Its solving by neural networks method application on the basis of adaptive critic is considered.

Spin formalism and applications to new physics searches

Energy Technology Data Exchange (ETDEWEB)

Haber, H.E. [Univ. of California, Santa Cruz, CA (United States)

1994-12-01

An introduction to spin techniques in particle physics is given. Among the topics covered are: helicity formalism and its applications to the decay and scattering of spin-1/2 and spin-1 particles, techniques for evaluating helicity amplitudes (including projection operator methods and the spinor helicity method), and density matrix techniques. The utility of polarization and spin correlations for untangling new physics beyond the Standard Model at future colliders such as the LHC and a high energy e{sup +}e{sup {minus}} linear collider is then considered. A number of detailed examples are explored including the search for low-energy supersymmetry, a non-minimal Higgs boson sector, and new gauge bosons beyond the W{sup {+-}} and Z.

Synchronous Supraglottic and Esophageal Squamous Cell Carcinomas Treated with a Monoisocentric Hybrid Intensity-Modulated Radiation Technique

Directory of Open Access Journals (Sweden)

Christian L. Barney

2018-01-01

Full Text Available Risk factors for squamous cell carcinomas (SCCs of the head and neck (HN and esophagus are similar. As such, synchronous primary tumors in these areas are not entirely uncommon. Definitive chemoradiation (CRT is standard care for locally advanced HNSCC and is a preferred option for inoperable esophageal SCC. Simultaneous treatment of both primaries with CRT can present technical challenges. We report a case of synchronous supraglottic and esophageal SCC primary tumors, highlighting treatment with a monoisocentric hybrid radiation technique and normal tissue toxicity considerations.

Formal Verification -26 ...

Indian Academy of Sciences (India)

by testing of the components and successful testing leads to the software being ... Formal verification is based on formal methods which are mathematically based ..... scenario under which a similar error could occur. There are various other ...

Hybrid FOSS Project

Data.gov (United States)

National Aeronautics and Space Administration — Armstrong researchers are continuing their efforts to further develop FOSS technologies. A hybrid FOSS technique (HyFOSS) employs conventional continuous grating...

Human hybrid hybridoma

Energy Technology Data Exchange (ETDEWEB)

Tiebout, R.F.; van Boxtel-Oosterhof, F.; Stricker, E.A.M.; Zeijlemaker, W.P.

1987-11-15

Hybrid hybridomas are obtained by fusion of two cells, each producing its own antibody. Several authors have reported the construction of murine hybrid hybridomas with the aim to obtain bispecific monoclonal antibodies. The authors have investigated, in a model system, the feasibility of constructing a human hybrid hybridoma. They fused two monoclonal cell lines: an ouabain-sensitive and azaserine/hypoxanthine-resistant Epstein-Barr virus-transformed human cell line that produces an IgG1kappa antibody directed against tetanus toxiod and an azaserine/hypoxanthine-sensitive and ouabain-resistant human-mouse xenohybrid cell line that produces a human IgG1lambda antibody directed against hepatitis-B surface antigen. Hybrid hybridoma cells were selected in culture medium containing azaserine/hypoxanthine and ouabain. The hybrid nature of the secreted antibodies was analyzed by means of two antigen-specific immunoassay. The results show that it is possible, with the combined use of transformation and xenohybridization techniques, to construct human hybrid hybridomas that produce bispecific antibodies. Bispecific antibodies activity was measured by means of two radioimmunoassays.

A Survey of Formal Methods for Intelligent Swarms

Science.gov (United States)

Truszkowski, Walt; Rash, James; Hinchey, Mike; Rouff, Chrustopher A.

2004-01-01

cutting edge in system correctness, and requires higher levels of assurance than other (traditional) missions that use a single or small number of spacecraft that are deterministic in nature and have near continuous communication access. One of the highest possible levels of assurance comes from the application of formal methods. Formal methods are mathematics-based tools and techniques for specifying and verifying (software and hardware) systems. They are particularly useful for specifying complex parallel systems, such as exemplified by the ANTS mission, where the entire system is difficult for a single person to fully understand, a problem that is multiplied with multiple developers. Once written, a formal specification can be used to prove properties of a system (e.g., the underlying system will go from one state to another or not into a specific state) and check for particular types of errors (e.g., race or livelock conditions). A formal specification can also be used as input to a model checker for further validation. This report gives the results of a survey of formal methods techniques for verification and validation of space missions that use swarm technology. Multiple formal methods were evaluated to determine their effectiveness in modeling and assuring the behavior of swarms of spacecraft using the ANTS mission as an example system. This report is the first result of the project to determine formal approaches that are promising for formally specifying swarm-based systems. From this survey, the most promising approaches were selected and are discussed relative to their possible application to the ANTS mission. Future work will include the application of an integrated approach, based on the selected approaches identified in this report, to the formal specification of the ANTS mission.

Novel hard mask fabrication method for hybrid plasmonic waveguide and metasurfaces

DEFF Research Database (Denmark)

Choudhury, Sajid; Zenin, Vladimir A.; Saha, Soham

2017-01-01

A hybrid plasmonic waveguide fabrication technique has been developed and waveguides fabricated using this technique have been demonstrated experimentally. The developed technique can be utilized for creating similar hybrid waveguide structures and metasurfaces with an array of material platforms...

A Comparison of Participation Patterns in Selected Formal, Non-Formal, and Informal Online Learning Environments

Science.gov (United States)

Schwier, Richard A.; Seaton, J. X.

2013-01-01

Does learner participation vary depending on the learning context? Are there characteristic features of participation evident in formal, non-formal, and informal online learning environments? Six online learning environments were chosen as epitomes of formal, non-formal, and informal learning contexts and compared. Transcripts of online…

Formalizing structured file services for the data storage and retrieval subsystem of the data management system for Spacestation Freedom

Science.gov (United States)

Jamsek, Damir A.

1993-01-01

A brief example of the use of formal methods techniques in the specification of a software system is presented. The report is part of a larger effort targeted at defining a formal methods pilot project for NASA. One possible application domain that may be used to demonstrate the effective use of formal methods techniques within the NASA environment is presented. It is not intended to provide a tutorial on either formal methods techniques or the application being addressed. It should, however, provide an indication that the application being considered is suitable for a formal methods by showing how such a task may be started. The particular system being addressed is the Structured File Services (SFS), which is a part of the Data Storage and Retrieval Subsystem (DSAR), which in turn is part of the Data Management System (DMS) onboard Spacestation Freedom. This is a software system that is currently under development for NASA. An informal mathematical development is presented. Section 3 contains the same development using Penelope (23), an Ada specification and verification system. The complete text of the English version Software Requirements Specification (SRS) is reproduced in Appendix A.

Performance evaluation of a hybrid-passive landfill leachate treatment system using multivariate statistical techniques

Energy Technology Data Exchange (ETDEWEB)

Wallace, Jack, E-mail: jack.wallace@ce.queensu.ca [Department of Civil Engineering, Queen’s University, Ellis Hall, 58 University Avenue, Kingston, Ontario K7L 3N6 (Canada); Champagne, Pascale, E-mail: champagne@civil.queensu.ca [Department of Civil Engineering, Queen’s University, Ellis Hall, 58 University Avenue, Kingston, Ontario K7L 3N6 (Canada); Monnier, Anne-Charlotte, E-mail: anne-charlotte.monnier@insa-lyon.fr [National Institute for Applied Sciences – Lyon, 20 Avenue Albert Einstein, 69621 Villeurbanne Cedex (France)

2015-01-15

Highlights: • Performance of a hybrid passive landfill leachate treatment system was evaluated. • 33 Water chemistry parameters were sampled for 21 months and statistically analyzed. • Parameters were strongly linked and explained most (>40%) of the variation in data. • Alkalinity, ammonia, COD, heavy metals, and iron were criteria for performance. • Eight other parameters were key in modeling system dynamics and criteria. - Abstract: A pilot-scale hybrid-passive treatment system operated at the Merrick Landfill in North Bay, Ontario, Canada, treats municipal landfill leachate and provides for subsequent natural attenuation. Collected leachate is directed to a hybrid-passive treatment system, followed by controlled release to a natural attenuation zone before entering the nearby Little Sturgeon River. The study presents a comprehensive evaluation of the performance of the system using multivariate statistical techniques to determine the interactions between parameters, major pollutants in the leachate, and the biological and chemical processes occurring in the system. Five parameters (ammonia, alkalinity, chemical oxygen demand (COD), “heavy” metals of interest, with atomic weights above calcium, and iron) were set as criteria for the evaluation of system performance based on their toxicity to aquatic ecosystems and importance in treatment with respect to discharge regulations. System data for a full range of water quality parameters over a 21-month period were analyzed using principal components analysis (PCA), as well as principal components (PC) and partial least squares (PLS) regressions. PCA indicated a high degree of association for most parameters with the first PC, which explained a high percentage (>40%) of the variation in the data, suggesting strong statistical relationships among most of the parameters in the system. Regression analyses identified 8 parameters (set as independent variables) that were most frequently retained for modeling

Yield and fruit quality traits of atemoya hybrids grown in Puerto Rico

Science.gov (United States)

As consumers seek healthy and more diverse food products the demand for tropical fruits has increased significantly during the past 15 years. There is a lack of formal experimentation to determine yield performance and fruit quality traits of atemoya (Annona squamosa x A. cherimola) hybrids. Six a...

Improving Learner Outcomes in Lifelong Education: Formal Pedagogies in Non-Formal Learning Contexts?

Science.gov (United States)

Zepke, Nick; Leach, Linda

2006-01-01

This article explores how far research findings about successful pedagogies in formal post-school education might be used in non-formal learning contexts--settings where learning may not lead to formal qualifications. It does this by examining a learner outcomes model adapted from a synthesis of research into retention. The article first…

Analysis of Formal Methods for Specification of E-Commerce Applications

Directory of Open Access Journals (Sweden)

Sadiq Ali Khan

2016-01-01

Full Text Available E-commerce based application characteristics portray elevated dynamics while incorporating decentralized nature. Extreme emphasis influencing structural design plus implementation, positions such applications highly appreciated. Significant research articles reveal that, applying formal methods addressing challenges incumbent with E-commerce based applications, contribute towards reliability and robustness obliging the system. Anticipating and designing sturdy e-process and concurrent implementation, allows application behavior extra strength against errors, frauds and hacking, minimizing program faults during application operations. Programmers find extreme difficulty guaranteeing correct processing under all circumstances, however, not impossible. Concealed flaws and errors, triggered only under unexpected and unanticipated scenarios, pilot subtle mistakes and appalling failures. Code authors utilize various formal methods for reducing these flaws. Mentioning prominent methods would include, ASM (Abstract State Machines, B-Method, z-Language, UML (Unified Modelling Language etc. This paper primarily focuses different formal methods applied while deliberating specification and verification techniques for cost effective.

Modeling and Analysis of Asynchronous Systems Using SAL and Hybrid SAL

Science.gov (United States)

Tiwari, Ashish; Dutertre, Bruno

2013-01-01

We present formal models and results of formal analysis of two different asynchronous systems. We first examine a mid-value select module that merges the signals coming from three different sensors that are each asynchronously sampling the same input signal. We then consider the phase locking protocol proposed by Daly, Hopkins, and McKenna. This protocol is designed to keep a set of non-faulty (asynchronous) clocks phase locked even in the presence of Byzantine-faulty clocks on the network. All models and verifications have been developed using the SAL model checking tools and the Hybrid SAL abstractor.

Nanocomposite metal amorphous-carbon thin films deposited by hybrid PVD and PECVD technique.

Science.gov (United States)

Teixeira, V; Soares, P; Martins, A J; Carneiro, J; Cerqueira, F

2009-07-01

Carbon based films can combine the properties of solid lubricating graphite structure and hard diamond crystal structure, i.e., high hardness, chemical inertness, high thermal conductivity and optical transparency without the crystalline structure of diamond. Issues of fundamental importance associated with nanocarbon coatings are reducing stress, improving adhesion and compatibility with substrates. In this work new nanocomposite coatings with improved toughness based in nanocrystalline phases of metals and ceramics embedded in amorphous carbon matrix are being developed within the frame of a research project: nc-MeNxCy/a-C(Me) with Me = Mo, Si, Al, Ti, etc. Carbide forming metal/carbon (Me/C) composite films with Me = Mo, W or Ti possess appropriate properties to overcome the limitation of pure DLC films. These novel coating architectures will be adopted with the objective to decrease residual stress, improve adherence and fracture toughness, obtain low friction coefficient and high wear-resistance. Nanocomposite DLC's films were deposited by hybrid technique using a PVD-Physically Vapor Deposition (magnetron sputtering) and Plasma Enhanced Chemical Vapor Deposition (PECVD), by the use of CH4 gas. The parameters varied were: deposition time, substrate temperature (180 degrees C) and dopant (Si + Mo) of the amorphous carbon matrix. All the depositions were made on silicon wafers and steel substrates precoated with a silicon inter-layer. The characterisation of the film's physico-mechanical properties will be presented in order to understand the influence of the deposition parameters and metal content used within the a-C matrix in the thin film properties. Film microstructure and film hybridization state was characterized by Raman Spectroscopy. In order to characterize morphology SEM and AFM will be used. Film composition was measured by Energy-Dispersive X-ray analysis (EDS) and by X-ray photoelectron spectroscopy (XPS). The contact angle for the produced DLC's on

Formalizing Knowledge in Multi-Scale Agent-Based Simulations.

Science.gov (United States)

Somogyi, Endre; Sluka, James P; Glazier, James A

2016-10-01

Multi-scale, agent-based simulations of cellular and tissue biology are increasingly common. These simulations combine and integrate a range of components from different domains. Simulations continuously create, destroy and reorganize constituent elements causing their interactions to dynamically change. For example, the multi-cellular tissue development process coordinates molecular, cellular and tissue scale objects with biochemical, biomechanical, spatial and behavioral processes to form a dynamic network. Different domain specific languages can describe these components in isolation, but cannot describe their interactions. No current programming language is designed to represent in human readable and reusable form the domain specific knowledge contained in these components and interactions. We present a new hybrid programming language paradigm that naturally expresses the complex multi-scale objects and dynamic interactions in a unified way and allows domain knowledge to be captured, searched, formalized, extracted and reused.

Hybridization and sequencing of nucleic acids using base pair mismatches

Science.gov (United States)

Fodor, Stephen P. A.; Lipshutz, Robert J.; Huang, Xiaohua

2001-01-01

Devices and techniques for hybridization of nucleic acids and for determining the sequence of nucleic acids. Arrays of nucleic acids are formed by techniques, preferably high resolution, light-directed techniques. Positions of hybridization of a target nucleic acid are determined by, e.g., epifluorescence microscopy. Devices and techniques are proposed to determine the sequence of a target nucleic acid more efficiently and more quickly through such synthesis and detection techniques.

The Technique of Changing the Drive Method of Micro Step Drive and Sensorless Drive for Hybrid Stepping Motor

Science.gov (United States)

Yoneda, Makoto; Dohmeki, Hideo

The position control system with the advantage large torque, low vibration, and high resolution can be obtained by the constant current micro step drive applied to hybrid stepping motor. However loss is large, in order not to be concerned with load torque but to control current uniformly. As the one technique of a position control system in which high efficiency is realizable, the same sensorless control as a permanent magnet motor is effective. But, it was the purpose that the control method proposed until now controls speed. Then, this paper proposed changing the drive method of micro step drive and sensorless drive. The change of the drive method was verified from the simulation and the experiment. On no load, it was checked not producing change of a large speed at the time of a change by making electrical angle and carrying out zero reset of the integrator. On load, it was checked that a large speed change arose. The proposed system could change drive method by setting up the initial value of an integrator using the estimated result, without producing speed change. With this technique, the low loss position control system, which employed the advantage of the hybrid stepping motor, has been built.

Combining Formal, Non-Formal and Informal Learning for Workforce Skill Development

Science.gov (United States)

Misko, Josie

2008-01-01

This literature review, undertaken for Australian Industry Group, shows how multiple variations and combinations of formal, informal and non-formal learning, accompanied by various government incentives and organisational initiatives (including job redesign, cross-skilling, multi-skilling, diversified career pathways, action learning projects,…

Preliminary Proceedings First International Workshop on Formal Methods for WirelessSystems

DEFF Research Database (Denmark)

The FMWS workshops aim at bringing together researchers interested in formal methods for wireless systems, more specifically in theories for semantics, logics, and verification techniques for wireless systems. Wireless systems are rapidly increasing their success in real-world applications while...

From Safety Analysis to Formal Specification

DEFF Research Database (Denmark)

Hansen, Kirsten Mark; Ravn, Anders P.; Stavridou, Victoria

1998-01-01

Software for safety critical systems must deal with the hazards identified bysafety analysis. This paper investigates, how the results of onesafety analysis technique, fault trees, are interpreted as software safetyrequirements to be used in the program design process. We propose thatfault tree...... analysis and program development use the samesystem model. This model is formalized in areal-time, interval logic, based on a conventional dynamic systems modelwith state evolving over time. Fault trees are interpreted astemporal formulas, and it is shown how such formulas can be usedfor deriving safety...

Recent Advances on Hybrid Intelligent Systems

CERN Document Server

Melin, Patricia; Kacprzyk, Janusz

2013-01-01

This book presents recent advances on hybrid intelligent systems using soft computing techniques for intelligent control and robotics, pattern recognition, time series prediction and optimization of complex problems. Soft Computing (SC) consists of several intelligent computing paradigms, including fuzzy logic, neural networks, and bio-inspired optimization algorithms, which can be used to produce powerful hybrid intelligent systems. The book is organized in five main parts, which contain groups of papers around a similar subject. The first part consists of papers with the main theme of hybrid intelligent systems for control and robotics, which are basically state of the art papers that propose new models and concepts, which can be the basis for achieving intelligent control and mobile robotics. The second part contains papers with the main theme of hybrid intelligent systems for pattern recognition and time series prediction, which are basically papers using nature-inspired techniques, like evolutionary algo...

Beyond formalism

Science.gov (United States)

Denning, Peter J.

1991-01-01

The ongoing debate over the role of formalism and formal specifications in software features many speakers with diverse positions. Yet, in the end, they share the conviction that the requirements of a software system can be unambiguously specified, that acceptable software is a product demonstrably meeting the specifications, and that the design process can be carried out with little interaction between designers and users once the specification has been agreed to. This conviction is part of a larger paradigm prevalent in American management thinking, which holds that organizations are systems that can be precisely specified and optimized. This paradigm, which traces historically to the works of Frederick Taylor in the early 1900s, is no longer sufficient for organizations and software systems today. In the domain of software, a new paradigm, called user-centered design, overcomes the limitations of pure formalism. Pioneered in Scandinavia, user-centered design is spreading through Europe and is beginning to make its way into the U.S.

A Hybrid Semi-Digital Transimpedance Amplifier With Noise Cancellation Technique for Nanopore-Based DNA Sequencing.

Science.gov (United States)

Hsu, Chung-Lun; Jiang, Haowei; Venkatesh, A G; Hall, Drew A

2015-10-01

Over the past two decades, nanopores have been a promising technology for next generation deoxyribonucleic acid (DNA) sequencing. Here, we present a hybrid semi-digital transimpedance amplifier (HSD-TIA) to sense the minute current signatures introduced by single-stranded DNA (ssDNA) translocating through a nanopore, while discharging the baseline current using a semi-digital feedback loop. The amplifier achieves fast settling by adaptively tuning a DC compensation current when a step input is detected. A noise cancellation technique reduces the total input-referred current noise caused by the parasitic input capacitance. Measurement results show the performance of the amplifier with 31.6 M Ω mid-band gain, 950 kHz bandwidth, and 8.5 fA/ √Hz input-referred current noise, a 2× noise reduction due to the noise cancellation technique. The settling response is demonstrated by observing the insertion of a protein nanopore in a lipid bilayer. Using the nanopore, the HSD-TIA was able to measure ssDNA translocation events.

Hybrid mesons with auxiliary fields

International Nuclear Information System (INIS)

Buisseret, F.; Mathieu, V.

2006-01-01

Hybrid mesons are exotic mesons in which the color field is not in the ground state. Their understanding deserves interest from a theoretical point of view, because it is intimately related to nonperturbative aspects of QCD. Moreover, it seems that some recently detected particles, such as the π 1 (1600) and the Y(4260), are serious hybrid candidates. In this work, we investigate the description of such exotic hadrons by applying the auxiliary fields technique (also known as the einbein field method) to the widely used spinless Salpeter Hamiltonian with appropriate linear confinement. Instead of the usual numerical resolution, this technique allows to find simplified analytical mass spectra and wave functions of the Hamiltonian, which still lead to reliable qualitative predictions. We analyse and compare two different descriptions of hybrid mesons, namely a two-body q system with an excited flux tube, or a three-body qg system. We also compute the masses of the 1 -+ hybrids. Our results are shown to be in satisfactory agreement with lattice QCD and other effective models. (orig.)

Formal specification level concepts, methods, and algorithms

CERN Document Server

Soeken, Mathias

2015-01-01

This book introduces a new level of abstraction that closes the gap between the textual specification of embedded systems and the executable model at the Electronic System Level (ESL). Readers will be enabled to operate at this new, Formal Specification Level (FSL), using models which not only allow significant verification tasks in this early stage of the design flow, but also can be extracted semi-automatically from the textual specification in an interactive manner.  The authors explain how to use these verification tasks to check conceptual properties, e.g. whether requirements are in conflict, as well as dynamic behavior, in terms of execution traces. • Serves as a single-source reference to a new level of abstraction for embedded systems, known as the Formal Specification Level (FSL); • Provides a variety of use cases which can be adapted to readers’ specific design flows; • Includes a comprehensive illustration of Natural Language Processing (NLP) techniques, along with examples of how to i...

Integrated formal operations plan

Energy Technology Data Exchange (ETDEWEB)

Cort, G.; Dearholt, W.; Donahue, S.; Frank, J.; Perkins, B.; Tyler, R.; Wrye, J.

1994-01-05

The concept of formal operations (that is, a collection of business practices to assure effective, accountable operations) has vexed the Laboratory for many years. To date most attempts at developing such programs have been based upon rigid, compliance-based interpretations of a veritable mountain of Department of Energy (DOE) orders, directives, notices, and standards. These DOE dictates seldom take the broad view but focus on highly specialized programs isolated from the overall context of formal operations. The result is a confusing array of specific, and often contradictory, requirements that produce a patchwork of overlapping niche programs. This unnecessary duplication wastes precious resources, dramatically increases the complexity of our work processes, and communicates a sense of confusion to our customers and regulators. Coupled with the artificial divisions that have historically existed among the Laboratory`s formal operations organizations (quality assurance, configuration management, records management, training, etc.), this approach has produced layers of increasingly vague and complex formal operations plans, each of which interprets its parent and adds additional requirements of its own. Organizational gridlock ensues whenever an activity attempts to implement these bureaucratic monstrosities. The integrated formal operations plan presented is to establish a set of requirements that must be met by an integrated formal operations program, assign responsibilities for implementation and operation of the program, and specify criteria against which the performance of the program will be measured. The accountable line manager specifies the items, processes, and information (the controlled elements) to which the formal operations program specified applies. The formal operations program is implemented using a graded approach based on the level of importance of the various controlled elements and the scope of the activities in which they are involved.

A Formal Valuation Framework for Emotions and Their Control.

Science.gov (United States)

Huys, Quentin J M; Renz, Daniel

2017-09-15

Computational psychiatry aims to apply mathematical and computational techniques to help improve psychiatric care. To achieve this, the phenomena under scrutiny should be within the scope of formal methods. As emotions play an important role across many psychiatric disorders, such computational methods must encompass emotions. Here, we consider formal valuation accounts of emotions. We focus on the fact that the flexibility of emotional responses and the nature of appraisals suggest the need for a model-based valuation framework for emotions. However, resource limitations make plain model-based valuation impossible and require metareasoning strategies to apportion cognitive resources adaptively. We argue that emotions may implement such metareasoning approximations by restricting the range of behaviors and states considered. We consider the processes that guide the deployment of the approximations, discerning between innate, model-free, heuristic, and model-based controllers. A formal valuation and metareasoning framework may thus provide a principled approach to examining emotions. Copyright © 2017 Society of Biological Psychiatry. Published by Elsevier Inc. All rights reserved.

The relationship between the Wigner-Weyl kinetic formalism and the complex geometrical optics method

OpenAIRE

Maj, Omar

2004-01-01

The relationship between two different asymptotic techniques developed in order to describe the propagation of waves beyond the standard geometrical optics approximation, namely, the Wigner-Weyl kinetic formalism and the complex geometrical optics method, is addressed. More specifically, a solution of the wave kinetic equation, relevant to the Wigner-Weyl formalism, is obtained which yields the same wavefield intensity as the complex geometrical optics method. Such a relationship is also disc...

One-boson exchange model in the Tobocman-Chulick formalism

International Nuclear Information System (INIS)

Chulick, G.S.

1988-01-01

An alternative method to the standard techniques of field theory for the derivation of few-body dynamical equations is presented here. This new formalism gives rise to a set of coupled, three-dimensional, relativistic equations which represent one or more (coupled channel) nuclear interactive processes. The particles represented by these equations are dressed and/or are composite, with mass and vertex renormalization done in a simple, straightforward manner. The n-boson Tamm-Dancoff approximation is then used to restrict to a reasonable amount the number of coupled equations to be solved. In the one-boson Tamm-Dancoff approximation, the formalism gives rise to relativistic One-Boson Exchange time-ordered perturbation theory: i.e., the basic Bonn potential. Moreover, the formalism gives the Bonn potential a firmer theoretical basis, with physical particles, and with mass and vertex renormalization systematically taken into account. The formalism was tested numerically at two levels. First, it was tested for the simple model of elastic scalar NN scattering via the exchange of a single scalar boson. The resultant phase shifts, when compared to those for the Bethe-Salpeter equation and several of its three-dimensional reductions for the same model, were found to be reasonable. Next, the formalism was tested for the same model expanded to include non-elastic NN scattering processes. Even though the resultant scattering cross-sections were not compatible to the empirical scattering cross-sections, it was possible to discern what must be included in the model to obtain qualitative agreement

The Formalization of the Business Process Modeling Goals

Directory of Open Access Journals (Sweden)

Ligita Bušinska

2016-10-01

Full Text Available In business process modeling the de facto standard BPMN has emerged. However, the applications of this notation have many subsets of elements and various extensions. Also, BPMN still coincides with many other modeling languages, forming a large set of available options for business process modeling languages and dialects. While, in general, the goal of modelers is a central notion in the choice of modeling languages and notations, in most researches that propose guidelines, techniques, and methods for business process modeling language evaluation and/or selection, the business process modeling goal is not formalized and not transparently taken into account. To overcome this gap, and to explicate and help to handle business process modeling complexity, the approach to formalize the business process modeling goal, and the supporting three dimensional business process modeling framework, are proposed.

Epitaxial growth of hybrid nanostructures

Science.gov (United States)

Tan, Chaoliang; Chen, Junze; Wu, Xue-Jun; Zhang, Hua

2018-02-01

Hybrid nanostructures are a class of materials that are typically composed of two or more different components, in which each component has at least one dimension on the nanoscale. The rational design and controlled synthesis of hybrid nanostructures are of great importance in enabling the fine tuning of their properties and functions. Epitaxial growth is a promising approach to the controlled synthesis of hybrid nanostructures with desired structures, crystal phases, exposed facets and/or interfaces. This Review provides a critical summary of the state of the art in the field of epitaxial growth of hybrid nanostructures. We discuss the historical development, architectures and compositions, epitaxy methods, characterization techniques and advantages of epitaxial hybrid nanostructures. Finally, we provide insight into future research directions in this area, which include the epitaxial growth of hybrid nanostructures from a wider range of materials, the study of the underlying mechanism and determining the role of epitaxial growth in influencing the properties and application performance of hybrid nanostructures.

Assume-Guarantee Abstraction Refinement Meets Hybrid Systems

Science.gov (United States)

Bogomolov, Sergiy; Frehse, Goran; Greitschus, Marius; Grosu, Radu; Pasareanu, Corina S.; Podelski, Andreas; Strump, Thomas

2014-01-01

Compositional verification techniques in the assume- guarantee style have been successfully applied to transition systems to efficiently reduce the search space by leveraging the compositional nature of the systems under consideration. We adapt these techniques to the domain of hybrid systems with affine dynamics. To build assumptions we introduce an abstraction based on location merging. We integrate the assume-guarantee style analysis with automatic abstraction refinement. We have implemented our approach in the symbolic hybrid model checker SpaceEx. The evaluation shows its practical potential. To the best of our knowledge, this is the first work combining assume-guarantee reasoning with automatic abstraction-refinement in the context of hybrid automata.

Leveraging Formal Methods and Fuzzing to Verify Security and Reliability Properties of Large-Scale High-Consequence Systems

Energy Technology Data Exchange (ETDEWEB)

Ruthruff, Joseph. R. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Armstrong, Robert C. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Davis, Benjamin Garry [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Mayo, Jackson R. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Punnoose, Ratish J. [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2012-09-01

Formal methods describe a class of system analysis techniques that seek to prove specific properties about analyzed designs, or locate flaws compromising those properties. As an analysis capability,these techniques are the subject of increased interest from both internal and external customers of Sandia National Laboratories. Given this lab's other areas of expertise, Sandia is uniquely positioned to advance the state-of-the-art with respect to several research and application areas within formal methods. This research project was a one-year effort funded by Sandia's CyberSecurity S&T Investment Area in its Laboratory Directed Research & Development program to investigate the opportunities for formal methods to impact Sandia's present mission areas, more fully understand the needs of the research community in the area of formal methods and where Sandia can contribute, and clarify from those potential research paths those that would best advance the mission-area interests of Sandia. The accomplishments from this project reinforce the utility of formal methods in Sandia, particularly in areas relevant to Cyber Security, and set the stage for continued Sandia investments to ensure this capabilityis utilized and advanced within this laboratory to serve the national interest.

Fuzzy-Based Adaptive Hybrid Burst Assembly Technique for Optical Burst Switched Networks

Directory of Open Access Journals (Sweden)

Abubakar Muhammad Umaru

2014-01-01

Full Text Available The optical burst switching (OBS paradigm is perceived as an intermediate switching technology for future all-optical networks. Burst assembly that is the first process in OBS is the focus of this paper. In this paper, an intelligent hybrid burst assembly algorithm that is based on fuzzy logic is proposed. The new algorithm is evaluated against the traditional hybrid burst assembly algorithm and the fuzzy adaptive threshold (FAT burst assembly algorithm via simulation. Simulation results show that the proposed algorithm outperforms the hybrid and the FAT algorithms in terms of burst end-to-end delay, packet end-to-end delay, and packet loss ratio.

Novel hybrid adaptive controller for manipulation in complex perturbation environments.

Directory of Open Access Journals (Sweden)

Alex M C Smith

Full Text Available In this paper we present a hybrid control scheme, combining the advantages of task-space and joint-space control. The controller is based on a human-like adaptive design, which minimises both control effort and tracking error. Our novel hybrid adaptive controller has been tested in extensive simulations, in a scenario where a Baxter robot manipulator is affected by external disturbances in the form of interaction with the environment and tool-like end-effector perturbations. The results demonstrated improved performance in the hybrid controller over both of its component parts. In addition, we introduce a novel method for online adaptation of learning parameters, using the fuzzy control formalism to utilise expert knowledge from the experimenter. This mechanism of meta-learning induces further improvement in performance and avoids the need for tuning through trial testing.

Incorporation of nano-clay saponite layers in the organo-clay hybrid films using anionic amphiphile stearic acid by Langmuir–Blodgett technique

Energy Technology Data Exchange (ETDEWEB)

Hussain, Syed Arshad, E-mail: sa_h153@hotmail.com [Department of Physics, Tripura University, Suryamaninagar-799022 (India); Chakraborty, S.; Bhattacharjee, D. [Department of Physics, Tripura University, Suryamaninagar-799022 (India); Schoonheydt, R.A. [Centres for Surface Chemistry and Catalysis, K.U. Leuven, Kasteelpark Arenberg 23, 3001 Leuven (Belgium)

2013-06-01

In general cationic amphiphiles are used to prepare organo-clay hybrid film in Langmuir–Blodgett (LB) technique. In this present communication we demonstrated a unique technique to prepare the organo–clay hybrid films using an anionic amphiphile. The T–O–T type clay saponite was incorporated onto a floating stearic acid monolayer via a divalent cation Mg{sup 2+}. Salt MgCl{sub 2} was mixed along with the clay dispersion in the LB trough and amphiphile solution was spread onto the subphase in order to make the organo-clay hybrid films. It was observed that salt (MgCl{sub 2}) concentration on the subphase affects the organization of nano-dimensional clay platelet (saponite) in organo-clay hybrid films at air–water interface as well as in LB films. Noticeable changes in area per molecule and shape of the isotherms were observed and measured at subphases with different salt concentrations. Infrared reflection absorption spectroscopy studies reveal that only an in-plane (996 cm{sup −1}) vibration of ν (Si-O) band occurred when the salt concentration was 10 mM. However, both in-plane (996 cm{sup −1}) and out-of-plane (1063 cm{sup −1}) vibrations of the ν (Si-O) band of saponite occurred when the subphase salt concentration was 100 mM. Also the out-of-plane vibration of ν (OH) of saponite was prominent at higher salt concentration. This is because at lower salt concentration clay sheets remain flat on the surface whereas; at higher MgCl{sub 2} concentration they aggregated and form stacks of saponite layers. Also they may be slightly tilted with a very small tilt angle at higher salt concentration making a favorable condition for both in-plane and out-of-plane vibrations of ν (Si-O) in the hybrid films. Observed decrease in starting area per molecule in the pressure area isotherm measured at higher salt concentration also supports the tilting of clay layers at air–clay dispersion interface. Attentuated total reflectance Fourier transform infrared

Practice-Oriented Formal Methods to Support the Software Development of Industrial Control Systems

CERN Document Server

AUTHOR|(CDS)2088632; Blanco Viñuela, Enrique

Formal specification and verification methods provide ways to describe requirements precisely and to check whether the requirements are satisfied by the design or the implementation. In other words, they can prevent development faults and therefore improve the quality of the developed systems. These methods are part of the state-of-the-practice in application domains with high criticality, such as avionics, railway or nuclear industry. The situation is different in the industrial control systems domain. As the criticality of the systems is much lower, formal methods are rarely used. The two main obstacles to using formal methods in systems with low- or medium-criticality are performance and usability. Overcoming these obstacles often needs deep knowledge and high effort. Model checking, one of the main formal verification techniques, is computationally difficult, therefore the analysis of non-trivial systems requires special considerations. Furthermore, the mainly academic tools implementing different model c...

Formal System Verification - Extension 2

Science.gov (United States)

2012-08-08

vision of truly trustworthy systems has been to provide a formally verified microkernel basis. We have previously developed the seL4 microkernel...together with a formal proof (in the theorem prover Isabelle/HOL) of its functional correctness [6]. This means that all the behaviours of the seL4 C...source code are included in the high-level, formal specification of the kernel. This work enabled us to provide further formal guarantees about seL4 , in

Psychologist in non-formal education

OpenAIRE

Pavićević Miljana S.

2011-01-01

Learning is not limited to school time. It starts at birth and continues throughout the entire life. Equally important as formal education there are also non-formal and informal education. Any kind of learning outside the traditional school can be called informal. However, it is not easy to define non-formal education because it is being described differently, for example as an education movement, process, system… Projects and programs implemented under the name of non-formal education are of...

Seven-hour fluorescence in situ hybridization technique for enumeration of Enterobacteriaceae in food and environmental water sample.

Science.gov (United States)

Ootsubo, M; Shimizu, T; Tanaka, R; Sawabe, T; Tajima, K; Ezura, Y

2003-01-01

A fluorescent in situ hybridization (FISH) technique using an Enterobacteriaceae-specific probe (probe D) to target 16S rRNA was improved in order to enumerate, within a single working day, Enterobacteriaceae present in food and environmental water samples. In order to minimize the time required for the FISH procedure, each step of FISH with probe D was re-evaluated using cultured Escherichia coli. Five minutes of ethanol treatment for cell fixation and hybridization were sufficient to visualize cultured E. coli, and FISH could be performed within 1 h. Because of the difficulties in detecting low levels of bacterial cells by FISH without cultivation, a FISH technique for detecting microcolonies on membrane filters was investigated to improve the bacterial detection limit. FISH with probe D following 6 h of cultivation to grow microcolonies on a 13 mm diameter membrane filter was performed, and whole Enterobacteriaceae microcolonies on the filter were then detected and enumerated by manual epifluorescence microscopic scanning at magnification of x100 in ca 5 min. The total time for FISH with probe D following cultivation (FISHFC) was reduced to within 7 h. FISHFC can be applied to enumerate cultivable Enterobacteriaceae in food (above 100 cells g-1) and environmental water samples (above 1 cell ml-1). Cultivable Enterobacteriaceae in food and water samples were enumerated accurately within 7 h using the FISHFC method. A FISHFC method capable of evaluating Enterobacteriaceae contamination in food and environmental water within a single working day was developed.

Issues to be considered on obtaining plant models for formal verification purposes

Science.gov (United States)

Pacheco, R.; Gonzalez, L.; Intriago, M.; Machado, J.; Prisacaru, G.; Olaru, D.

2016-08-01

The development of dependable software for mechatronic systems can be a very complex and hard task. For facilitating the obtaining of dependable software for industrial controllers, some powerful software tools and analysis techniques can be used. Mainly, when using simulation and formal verification analysis techniques, it is necessary to develop plant models, in order to describe the plant behavior of those systems. However, developing a plant model implies that designer takes his (or her) decisions concerning granularity and level of abstraction of models; approach to consider for modeling (global or modular); and definition of strategies for simulation and formal verification tasks. This paper intends to highlight some aspects that can be considered for taking into account those decisions. For this purpose, it is presented a case study and there are illustrated and discussed very important aspects concerning above exposed issues.

Hybrid inflation in the complex plane

International Nuclear Information System (INIS)

Buchmueller, W.; Domcke, V.; Kamada, K.; Schmitz, K.

2014-04-01

Supersymmetric hybrid inflation is an exquisite framework to connect inflationary cosmology to particle physics at the scale of grand unification. Ending in a phase transition associated with spontaneous symmetry breaking, it can naturally explain the generation of entropy, matter and dark matter. Coupling F-term hybrid inflation to soft supersymmetry breaking distorts the rotational invariance in the complex inflaton plane - an important fact, which has been neglected in all previous studies. Based on the δN formalism, we analyze the cosmological perturbations for the first time in the full two-field model, also taking into account the fast-roll dynamics at and after the end of inflation. As a consequence of the two-field nature of hybrid inflation, the predictions for the primordial fluctuations depend not only on the parameters of the Lagrangian, but are eventually fixed by the choice of the inflationary trajectory. Recognizing hybrid inflation as a two-field model resolves two shortcomings often times attributed to it: The fine-tuning problem of the initial conditions is greatly relaxed and a spectral index in accordance with the PLANCK data can be achieved in a large part of the parameter space without the aid of supergravity corrections. Our analysis can be easily generalized to other (including large-field) scenarios of inflation in which soft supersymmetry breaking transforms an initially single-field model into a multi-field model.

Formalization of the Integral Calculus in the PVS Theorem Prover

Science.gov (United States)

Butler, Ricky W.

2004-01-01

The PVS Theorem prover is a widely used formal verification tool used for the analysis of safety-critical systems. The PVS prover, though fully equipped to support deduction in a very general logic framework, namely higher-order logic, it must nevertheless, be augmented with the definitions and associated theorems for every branch of mathematics and Computer Science that is used in a verification. This is a formidable task, ultimately requiring the contributions of researchers and developers all over the world. This paper reports on the formalization of the integral calculus in the PVS theorem prover. All of the basic definitions and theorems covered in a first course on integral calculus have been completed.The theory and proofs were based on Rosenlicht's classic text on real analysis and follow the traditional epsilon-delta method. The goal of this work was to provide a practical set of PVS theories that could be used for verification of hybrid systems that arise in air traffic management systems and other aerospace applications. All of the basic linearity, integrability, boundedness, and continuity properties of the integral calculus were proved. The work culminated in the proof of the Fundamental Theorem Of Calculus. There is a brief discussion about why mechanically checked proofs are so much longer than standard mathematics textbook proofs.

Design and management of energy-efficient hybrid electrical energy storage systems

CERN Document Server

Kim, Younghyun

2014-01-01

This book covers system-level design optimization and implementation of hybrid energy storage systems. The author introduces various techniques to improve the performance of hybrid energy storage systems, in the context of design optimization and automation. Various energy storage techniques are discussed, each with its own advantages and drawbacks, offering viable, hybrid approaches to building a high performance, low cost energy storage system. Novel design optimization techniques and energy-efficient operation schemes are introduced. The author also describes the technical details of an act

Topical Roots of Formal Dialectic

NARCIS (Netherlands)

Krabbe, Erik C. W.

Formal dialectic has its roots in ancient dialectic. We can trace this influence in Charles Hamblin's book on fallacies, in which he introduced his first formal dialectical systems. Earlier, Paul Lorenzen proposed systems of dialogical logic, which were in fact formal dialectical systems avant la

A quantitative comparison of noise reduction across five commercial (hybrid and model-based) iterative reconstruction techniques: an anthropomorphic phantom study.

Science.gov (United States)

Patino, Manuel; Fuentes, Jorge M; Hayano, Koichi; Kambadakone, Avinash R; Uyeda, Jennifer W; Sahani, Dushyant V

2015-02-01

OBJECTIVE. The objective of our study was to compare the performance of three hybrid iterative reconstruction techniques (IRTs) (ASiR, iDose4, SAFIRE) and their respective strengths for image noise reduction on low-dose CT examinations using filtered back projection (FBP) as the standard reference. Also, we compared the performance of these three hybrid IRTs with two model-based IRTs (Veo and IMR) for image noise reduction on low-dose examinations. MATERIALS AND METHODS. An anthropomorphic abdomen phantom was scanned at 100 and 120 kVp and different tube current-exposure time products (25-100 mAs) on three CT systems (for ASiR and Veo, Discovery CT750 HD; for iDose4 and IMR, Brilliance iCT; and for SAFIRE, Somatom Definition Flash). Images were reconstructed using FBP and using IRTs at various strengths. Nine noise measurements (mean ROI size, 423 mm(2)) on extracolonic fat for the different strengths of IRTs were recorded and compared with FBP using ANOVA. Radiation dose, which was measured as the volume CT dose index and dose-length product, was also compared. RESULTS. There were no significant differences in radiation dose and image noise among the scanners when FBP was used (p > 0.05). Gradual image noise reduction was observed with each increasing increment of hybrid IRT strength, with a maximum noise suppression of approximately 50% (48.2-53.9%). Similar noise reduction was achieved on the scanners by applying specific hybrid IRT strengths. Maximum noise reduction was higher on model-based IRTs (68.3-81.1%) than hybrid IRTs (48.2-53.9%) (p < 0.05). CONCLUSION. When constant scanning parameters are used, radiation dose and image noise on FBP are similar for CT scanners made by different manufacturers. Significant image noise reduction is achieved on low-dose CT examinations rendered with IRTs. The image noise on various scanners can be matched by applying specific hybrid IRT strengths. Model-based IRTs attain substantially higher noise reduction than hybrid

Optimisation Sizing of Hybrid Wind-Diesel Systems using Linear Programming Technique

OpenAIRE

Gan, Leong Kit; Shek, Jonathan; Mueller, Markus

2014-01-01

Despite the great potential of hybrid wind-diesel system in supplying energy to remote or island communities, sizing the system components have been a challenging problem for many project managers due to the reliance on various factors. This work considers utilising a fixed speed wind turbine (induction generator) in the hybrid system. It requires energy for start-up operation and this work takes into account for sizing the battery storage. In addition, the trade-off between the number of bat...

Lending Policies of Informal, Formal, and Semi-formal Lenders: Evidence from Vietnam

NARCIS (Netherlands)

Lensink, B.W.; Pham, T.T.T.

2007-01-01

This paper compares lending policies of formal, informal and semiformal lenders with respect to household lending in Vietnam. The analysis suggests that the probability of using formal or semiformal credit increases if borrowers provide collateral, a guarantor and/or borrow for business-related

Towards a formal semantics for Ada 9X

Science.gov (United States)

Guaspari, David; Mchugh, John; Wolfgang, Polak; Saaltink, Mark

1995-01-01

The Ada 9X language precision team was formed during the revisions of Ada 83, with the goal of analyzing the proposed design, identifying problems, and suggesting improvements, through the use of mathematical models. This report defines a framework for formally describing Ada 9X, based on Kahn's 'natural semantics', and applies the framework to portions of the language. The proposals for exceptions and optimization freedoms are also analyzed, using a different technique.

Hybrid Arrays for Chemical Sensing

Science.gov (United States)

Kramer, Kirsten E.; Rose-Pehrsson, Susan L.; Johnson, Kevin J.; Minor, Christian P.

In recent years, multisensory approaches to environment monitoring for chemical detection as well as other forms of situational awareness have become increasingly popular. A hybrid sensor is a multimodal system that incorporates several sensing elements and thus produces data that are multivariate in nature and may be significantly increased in complexity compared to data provided by single-sensor systems. Though a hybrid sensor is itself an array, hybrid sensors are often organized into more complex sensing systems through an assortment of network topologies. Part of the reason for the shift to hybrid sensors is due to advancements in sensor technology and computational power available for processing larger amounts of data. There is also ample evidence to support the claim that a multivariate analytical approach is generally superior to univariate measurements because it provides additional redundant and complementary information (Hall, D. L.; Linas, J., Eds., Handbook of Multisensor Data Fusion, CRC, Boca Raton, FL, 2001). However, the benefits of a multisensory approach are not automatically achieved. Interpretation of data from hybrid arrays of sensors requires the analyst to develop an application-specific methodology to optimally fuse the disparate sources of data generated by the hybrid array into useful information characterizing the sample or environment being observed. Consequently, multivariate data analysis techniques such as those employed in the field of chemometrics have become more important in analyzing sensor array data. Depending on the nature of the acquired data, a number of chemometric algorithms may prove useful in the analysis and interpretation of data from hybrid sensor arrays. It is important to note, however, that the challenges posed by the analysis of hybrid sensor array data are not unique to the field of chemical sensing. Applications in electrical and process engineering, remote sensing, medicine, and of course, artificial

Wind Power Ramp Events Prediction with Hybrid Machine Learning Regression Techniques and Reanalysis Data

Directory of Open Access Journals (Sweden)

Laura Cornejo-Bueno

2017-11-01

Full Text Available Wind Power Ramp Events (WPREs are large fluctuations of wind power in a short time interval, which lead to strong, undesirable variations in the electric power produced by a wind farm. Its accurate prediction is important in the effort of efficiently integrating wind energy in the electric system, without affecting considerably its stability, robustness and resilience. In this paper, we tackle the problem of predicting WPREs by applying Machine Learning (ML regression techniques. Our approach consists of using variables from atmospheric reanalysis data as predictive inputs for the learning machine, which opens the possibility of hybridizing numerical-physical weather models with ML techniques for WPREs prediction in real systems. Specifically, we have explored the feasibility of a number of state-of-the-art ML regression techniques, such as support vector regression, artificial neural networks (multi-layer perceptrons and extreme learning machines and Gaussian processes to solve the problem. Furthermore, the ERA-Interim reanalysis from the European Center for Medium-Range Weather Forecasts is the one used in this paper because of its accuracy and high resolution (in both spatial and temporal domains. Aiming at validating the feasibility of our predicting approach, we have carried out an extensive experimental work using real data from three wind farms in Spain, discussing the performance of the different ML regression tested in this wind power ramp event prediction problem.

Novel hybrid Monte Carlo/deterministic technique for shutdown dose rate analyses of fusion energy systems

International Nuclear Information System (INIS)

Ibrahim, Ahmad M.; Peplow, Douglas E.; Peterson, Joshua L.; Grove, Robert E.

2014-01-01

Highlights: •Develop the novel Multi-Step CADIS (MS-CADIS) hybrid Monte Carlo/deterministic method for multi-step shielding analyses. •Accurately calculate shutdown dose rates using full-scale Monte Carlo models of fusion energy systems. •Demonstrate the dramatic efficiency improvement of the MS-CADIS method for the rigorous two step calculations of the shutdown dose rate in fusion reactors. -- Abstract: The rigorous 2-step (R2S) computational system uses three-dimensional Monte Carlo transport simulations to calculate the shutdown dose rate (SDDR) in fusion reactors. Accurate full-scale R2S calculations are impractical in fusion reactors because they require calculating space- and energy-dependent neutron fluxes everywhere inside the reactor. The use of global Monte Carlo variance reduction techniques was suggested for accelerating the R2S neutron transport calculation. However, the prohibitive computational costs of these approaches, which increase with the problem size and amount of shielding materials, inhibit their ability to accurately predict the SDDR in fusion energy systems using full-scale modeling of an entire fusion plant. This paper describes a novel hybrid Monte Carlo/deterministic methodology that uses the Consistent Adjoint Driven Importance Sampling (CADIS) method but focuses on multi-step shielding calculations. The Multi-Step CADIS (MS-CADIS) methodology speeds up the R2S neutron Monte Carlo calculation using an importance function that represents the neutron importance to the final SDDR. Using a simplified example, preliminary results showed that the use of MS-CADIS enhanced the efficiency of the neutron Monte Carlo simulation of an SDDR calculation by a factor of 550 compared to standard global variance reduction techniques, and that the efficiency enhancement compared to analog Monte Carlo is higher than a factor of 10,000

In situ hybridization; principles and applications: review article

Directory of Open Access Journals (Sweden)

Zahra Nozhat

2015-06-01

Full Text Available In situ hybridization (ISH is a method that uses labeled complementary single strand DNA or RNA to localize specific DNA or RNA sequences in an intact cell or in a fixed tissue section. The main steps of ISH consist of: probe selection, tissue or sample preparation, pre-hybridization treatment, hybridization and washing, detection and control procedure. Probe selection is one of the important aspects of successful hybridization. ISH sensitivity and specificity can be influenced by: probe construct, efficiency of labeling, percentage of GC, probe length and signal detection systems. Different methods such as nick translation, random priming, end tailing and T4 DNA polymerase replacement are used for probe generation. Both radioactive and non-radioactive labels can be used in order to probe labeling. Nucleic acid maintenance in samples, prevention of morphological changes of samples and probe penetration into tissue section are the main aims of sample preparation step. Then, a small amount of solution containing probe, is added on slides containing tissue sections for hybridization process, then slides are incubated overnight. Next day, washes are carried out to remove the probes which are not bound to target DNA or RNA. Finally, in order to be sure that the observed labeling is specific to the target sequence, using several control procedures is very important. Various techniques based on ISH consist of: Fluorescence in situ hybridization (FISH, chromogenic in situ hybridization (CISH, genomic in situ hybridization (GISH, comparative genomic hybridization (CGH, spectral karyotyping (SKY and multiplex fluorescence in situ hybridization (MFISH. One of the most common techniques of ISH is fluorescence in situ hybridization. FISH can be used to: 1 detect small deletions and duplications that are not visible using microscope analysis, 2 detect how many chromosomes of a certain type are present in each cell and 3 confirm rearrangements that are

Assertion checking environment (ACE) for formal verification of C programs

International Nuclear Information System (INIS)

Sharma, Babita; Dhodapkar, S.D.; Ramesh, S.

2003-01-01

In this paper we describe an Assertion Checking Environment (ACE) for compositional verification of programs, which are written in an industrially sponsored safe subset of C programming language called MISRA C [Guidelines for the Use of the C Language in Vehicle Based Software, 1998]. The theory is based on Hoare logic [Commun. ACM 12 (1969) 576] and the C programs are verified using static assertion checking technique. First the functional specifications of the program, captured in the form of pre- and post-conditions for each C function, are derived from the specifications. These pre- and post-conditions are then introduced as assertions (also called annotations or formal comments) in the program code. The assertions are then proved formally using ACE and theorem proving tool called Stanford Temporal Prover [The Stanford Temporal Prover User's Manual, 1998]. ACE has been developed by us and consists mainly of a translator c2spl, a GUI and some utility programs. The technique and tools developed are targeted towards verification of real-time embedded software

Formalized Informal Learning

DEFF Research Database (Denmark)

Levinsen, Karin Tweddell; Sørensen, Birgitte Holm

2013-01-01

are examined and the relation between network society competences, learners’ informal learning strategies and ICT in formalized school settings over time is studied. The authors find that aspects of ICT like multimodality, intuitive interaction design and instant feedback invites an informal bricoleur approach....... When integrated into certain designs for teaching and learning, this allows for Formalized Informal Learning and support is found for network society competences building....

Treatment of breast cancer with simultaneous integrated boost in hybrid plan technique. Influence of flattening filter-free beams

Energy Technology Data Exchange (ETDEWEB)

Bahrainy, Marzieh; Kretschmer, Matthias; Joest, Vincent; Kasch, Astrid; Wuerschmidt, Florian; Dahle, Joerg; Lorenzen, Joern [Radiologische Allianz, Hamburg (Germany)

2016-05-15

The present study compares in silico treatment plans using hybrid plan technique during hypofractionated radiation of mammary carcinoma with simultaneous integrated boost (SIB). The influence of 6 MV photon radiation in flattening filter free (FFF) mode against the clinical standard flattening filter (FF) mode is to be examined. RT planning took place with FF and FFF radiation plans for 10 left-sided breast cancer patients. Hybrid plans were realised with two tangential IMRT fields and one VMAT field. The dose prescription was in line with the guidelines in the ARO-2010-01 study. The dosimetric verification took place with a manufacturer-independent measurement system. Required dose prescriptions for the planning target volumes (PTV) were achieved for both groups. The average dose values of the ipsi- and contralateral lung and the heart did not differ significantly. The overall average incidental dose to the left anterior descending artery (LAD) of 8.24 ± 3.9 Gy in the FFF group and 9.05 ± 3.7 Gy in the FF group (p < 0.05) were found. The dosimetric verifications corresponded to the clinical requirements. FFF-based RT plans reduced the average treatment time by 17 s/fraction. In comparison to the FF-based hybrid plan technique the FFF mode allows further reduction of the average LAD dose for comparable target volume coverage without adverse low-dose exposure of contralateral structures. The combination of hybrid plan technique and 6 MV photon radiation in the FFF mode is suitable for use with hypofractionated dose schemes. The increased dose rate allows a substantial reduction of treatment time and thus beneficial application of the deep inspiration breath hold technique. (orig.) [German] Vergleich der ''In-silico''-Bestrahlungsplaene der klinisch etablierten Hybridplan-Technik bei hypofraktionierter Bestrahlung des Mammakarzinoms mit simultan integriertem Boost (SIB). Untersucht wird der Einfluss von 6MV-Photonenstrahlung im Flattening

Hybrid Higgs inflation: The use of disformal transformation

Science.gov (United States)

Sato, Seiga; Maeda, Kei-ichi

2018-04-01

We propose a hybrid type of the conventional Higgs inflation and new Higgs inflation models. We perform a disformal transformation into the Einstein frame and analyze the background dynamics and the cosmological perturbations in the truncated model, in which we ignore the higher-derivative terms of the Higgs field. From the observed power spectrum of the density perturbations, we obtain the constraint on the nonminimal coupling constant ξ and the mass parameter M in the derivative coupling. Although the primordial tilt ns in the hybrid model barely changes, the tensor-to-scalar ratio r moves from the value in the new Higgs inflationary model to that in the conventional Higgs inflationary model as |ξ | increases. We confirm our results by numerical analysis by ADM formalism of the full theory in the Jordan frame.

MODEL APLIKASI FIKIH MUAMALAH PADA FORMULASI HYBRID CONTRACT

Directory of Open Access Journals (Sweden)

Ali Murtadho

2013-10-01

Full Text Available Modern literatures of fiqh mu’āmalah talk alot about various contract formulation with capability of maximizing profit in shariah finance industry. This new contract modification is the synthesis among existing contracts which is formulated in such a way to be an integrated contract. This formulation is known as a hybrid contract or multicontract (al-'uqūd al-murakkabah. Some of them are, bay' bi thaman 'ājil, Ijārah muntahiyah bi ’l-tamlīk dan mushārakah mutanāqiṣah. This study intends to further describe models of hybrid contract, and explore the shari'ah principles in modern financial institutions. This study found a potential shift from the ideal values of the spirit of shari'ah into the spirit of competition based shari'ah formally.

Accurate treatment of solids with the HSE screened hybrid

Energy Technology Data Exchange (ETDEWEB)

Henderson, Thomas M.; Paier, Joachim; Scuseria, Gustavo E. [Department of Chemistry and Department of Physics and Astronomy, Rice University, Houston, TX 77005 (United States); Department of Physics and Astronomy, Rice University, Houston, TX 77005 (United States)

2011-04-15

Density functional theory (DFT) is the most widely used technique in the realm of first-principles electronic structure methods. Principally, this is because DFT in the Kohn-Sham (KS) formalism offers the appealing combination of relatively high accuracy and relatively low computational cost. Despite their great successes, traditional semilocal functionals fail to describe some important problems in solid state physics and materials science, the most conspicuous example being the notorious band gap problem. More sophisticated functionals providing greater accuracy without sacrificing computational efficiency are therefore needed. The Heyd-Scuseria-Ernzerhof (HSE) screened hybrid density functional [J. Heyd, G. E. Scuseria, and M. Ernzerhof, J. Chem. Phys. 118, 8207 (2003); J. Heyd and G. E. Scuseria, J. Chem. Phys. 121, 1187 (2004)] successfully addresses some of the chief problems which plague semilocal functionals by including only the important parts of exact nonlocal Hartree-Fock-type exchange. This work discusses some of the concepts underlying HSE and provides illustrative examples highlighting the successes of HSE in numerous solid state applications. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

A Discrete Wavelet Based Feature Extraction and Hybrid Classification Technique for Microarray Data Analysis

Directory of Open Access Journals (Sweden)

Jaison Bennet

2014-01-01

Full Text Available Cancer classification by doctors and radiologists was based on morphological and clinical features and had limited diagnostic ability in olden days. The recent arrival of DNA microarray technology has led to the concurrent monitoring of thousands of gene expressions in a single chip which stimulates the progress in cancer classification. In this paper, we have proposed a hybrid approach for microarray data classification based on nearest neighbor (KNN, naive Bayes, and support vector machine (SVM. Feature selection prior to classification plays a vital role and a feature selection technique which combines discrete wavelet transform (DWT and moving window technique (MWT is used. The performance of the proposed method is compared with the conventional classifiers like support vector machine, nearest neighbor, and naive Bayes. Experiments have been conducted on both real and benchmark datasets and the results indicate that the ensemble approach produces higher classification accuracy than conventional classifiers. This paper serves as an automated system for the classification of cancer and can be applied by doctors in real cases which serve as a boon to the medical community. This work further reduces the misclassification of cancers which is highly not allowed in cancer detection.

Tough hybrid ceramic-based material with high strength

International Nuclear Information System (INIS)

Guo, Shuqi; Kagawa, Yutaka; Nishimura, Toshiyuki

2012-01-01

This study describes a tough and strong hybrid ceramic material consisting of platelet-like zirconium compounds and metal. A mixture of boron carbide and excess zirconium powder was heated to 1900 °C using a liquid-phase reaction sintering technique to produce a platelet-like ZrB 2 -based hybrid ceramic bonded by a thin zirconium layer. The platelet-like ZrB 2 grains were randomly present in the as-sintered hybrid ceramic. Relative to non-hybrid ceramics, the fracture toughness and flexural strength of the hybrid ceramic increased by approximately 2-fold.

The base of the iceberg: informal learning and its impact on formal and non-formal learning

OpenAIRE

Rogers, Alan

2014-01-01

The author looks at learning (formal, non-formal and informal) and examines the hidden world of informal (unconscious, unplanned) learning. He points out the importance of informal learning for creating tacit attitudes and values, knowledge and skills which influence (conscious, planned) learning - formal and non-formal. Moreover, he explores the implications of informal learning for educational planners and teachers in the context of lifelong learning. While mainly aimed at adult educators, ...

Biological evaluation of zirconia/PEG hybrid materials synthesized via sol–gel technique

Energy Technology Data Exchange (ETDEWEB)

Catauro, M., E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Papale, F.; Bollino, F. [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Gallicchio, M.; Pacifico, S. [Department Environmental, Biological and Pharmaceutical Sciences and Technologies, Second University of Naples, Via Vivaldi 43, 81100 Caserta (Italy)

2014-07-01

The objective of the following study has been the synthesis via sol–gel and the characterization of novel organic–inorganic hybrid materials to be used in biomedical field. The prepared materials consist of an inorganic zirconia matrix containing as organic component the polyethylene glycol (PEG), a water-soluble polymer used in medical and pharmaceutical fields. Various hybrids have been synthesized changing the molar ratio between the organic and inorganic parts. Fourier transform spectroscopy suggests that the structure of the interpenetrating network is realized by hydrogen bonds between the Zr-OH group in the sol–gel intermediate species and both the terminal alcoholic group and ethereal oxygen atoms in the repeating units of polymer The amorphous nature of the gels has been ascertained by X-ray diffraction analysis. The morphology observation has been carried out by using the Scanning Electron Microscope and has confirmed that the obtained materials are nanostructurated hybrids. The bioactivity of the synthesized system has been shown by the formation of a hydroxyapatite layer on the surface of samples soaked in a fluid simulating the human blood plasma. The potential biocompatibility of hybrids has been assessed as performing indirect MTT cytotoxicity assay towards 3T3 cell line at 24, 48, and 72 h exposure times. - Highlights: • ZrO{sub 2}/PEG amorphous class I organic–inorganic hybrid synthesis via sol–gel • Bioactivity evaluation of materials by the formation of apatite on surface in SBF • Biocompatibility test with indirect MTT cytotoxicity assay on NHI 3T3 cell line.

Biological evaluation of zirconia/PEG hybrid materials synthesized via sol–gel technique

International Nuclear Information System (INIS)

Catauro, M.; Papale, F.; Bollino, F.; Gallicchio, M.; Pacifico, S.

2014-01-01

The objective of the following study has been the synthesis via sol–gel and the characterization of novel organic–inorganic hybrid materials to be used in biomedical field. The prepared materials consist of an inorganic zirconia matrix containing as organic component the polyethylene glycol (PEG), a water-soluble polymer used in medical and pharmaceutical fields. Various hybrids have been synthesized changing the molar ratio between the organic and inorganic parts. Fourier transform spectroscopy suggests that the structure of the interpenetrating network is realized by hydrogen bonds between the Zr-OH group in the sol–gel intermediate species and both the terminal alcoholic group and ethereal oxygen atoms in the repeating units of polymer The amorphous nature of the gels has been ascertained by X-ray diffraction analysis. The morphology observation has been carried out by using the Scanning Electron Microscope and has confirmed that the obtained materials are nanostructurated hybrids. The bioactivity of the synthesized system has been shown by the formation of a hydroxyapatite layer on the surface of samples soaked in a fluid simulating the human blood plasma. The potential biocompatibility of hybrids has been assessed as performing indirect MTT cytotoxicity assay towards 3T3 cell line at 24, 48, and 72 h exposure times. - Highlights: • ZrO 2 /PEG amorphous class I organic–inorganic hybrid synthesis via sol–gel • Bioactivity evaluation of materials by the formation of apatite on surface in SBF • Biocompatibility test with indirect MTT cytotoxicity assay on NHI 3T3 cell line

Contrast-Enhanced MR Angiography (CEMRA) in Peripheral Arterial Occlusive Disease (PAOD): conventional moving table technique versus hybrid technique; Kontrastverstaerkte MR-Angiographie (CEMRA) bei peripherer AVK (pAVK): konventionelle Tischverschiebetechnik versus Hybrid-Technik

Energy Technology Data Exchange (ETDEWEB)

Kalle, T. von; Gerlach, A.; Hatopp, A.; Klinger, S.; Prodehl, P.; Arlat, I.P. [Katharinenhospital, Stuttgart (Germany). Radiologisches Inst.

2004-01-01

Patients and Methods: 80 patients (males n = 60, females n = 20, median age = 70 years, diabetics n = 27) with PAOD were examined with a 1,5T system (40 mT/m) using a dedicated phased array peripheral vascular coil. Protocol A consisted of a single injection of Gd-BOPTA with consecutive craniocaudal image acquisition and protocol B of two injections, with the first injection of Gd-BOPTA followed by image acquisition of the popliteocrural and pedal segments and the second injection followed by acquiring the aortoiliac and femoral segments (hybrid technique). The evaluation of the arterial system was directed to the iliac, femoral, popliteocrural and pedal arteries. Results: The visualization of the entire aortopedal vascular system was of diagnostically good or satisfactory quality in 16 of 40 patients using protocol A and in 29 of 40 patients using protocol B (iliac 40 vs. 37, femoral 40 vs. 40, popliteocrural 35 vs. 37, pedal 16 vs. 29); without the pedal station the number increased to 35 of 40 patients for both protocols. The reason of diagnostic limitations was an arteriovenous overlap in 24 of 80 cases, with 19 of 40 cases for protocol A and 5 of 40 for protocol B, located exclusively in the cruropedal region. Conclusion: Moving table hybrid CEMRA is superior to conventional technique in craniocaudal direction by producing less venous overlap of arteries and is especially more suitable for the diagnostic evaluation of the cruropedal region. (orig.) [German] Patienten und Methodik: Untersucht wurden 80 Patienten (maennl. n = 60, weibl. n = 20, mittl. Alter 70 J., Diabetiker n = 27) mit pAVK an einem 1,5-Tesla-Geraet (40 mT/m) mit dedizierter Phased-Array-Oberflaechen-Gefaessspule. Protokoll A beinhaltete eine Kontrastmittel-Injektion (Gd-BOPTA) mit konsekutiver kraniokaudaler Bildakquisition. In Protokoll B erfolgte die Akquisition zunaechst der Unterschenkel- und Fussetage mittels einer ersten, anschliessend der Abdomen-Becken- und Oberschenkeletage mittels

A hybrid firefly algorithm and pattern search technique for SSSC based power oscillation damping controller design

Directory of Open Access Journals (Sweden)

Srikanta Mahapatra

2014-12-01

Full Text Available In this paper, a novel hybrid Firefly Algorithm and Pattern Search (h-FAPS technique is proposed for a Static Synchronous Series Compensator (SSSC-based power oscillation damping controller design. The proposed h-FAPS technique takes the advantage of global search capability of FA and local search facility of PS. In order to tackle the drawback of using the remote signal that may impact reliability of the controller, a modified signal equivalent to the remote speed deviation signal is constructed from the local measurements. The performances of the proposed controllers are evaluated in SMIB and multi-machine power system subjected to various transient disturbances. To show the effectiveness and robustness of the proposed design approach, simulation results are presented and compared with some recently published approaches such as Differential Evolution (DE and Particle Swarm Optimization (PSO. It is observed that the proposed approach yield superior damping performance compared to some recently reported approaches.

Molecular data reveal complex hybridization and a cryptic species of neotropical wild cat.

Science.gov (United States)

Trigo, Tatiane C; Schneider, Alexsandra; de Oliveira, Tadeu G; Lehugeur, Livia M; Silveira, Leandro; Freitas, Thales R O; Eizirik, Eduardo

2013-12-16

Hybridization among animal species has recently become more recognized as an important phenomenon, especially in the context of recent radiations. Here we show that complex hybridization has led to contrasting patterns of genomic composition among closely related species of the Neotropical cat genus Leopardus. We show strong evidence of ancient hybridization and introgression between the pampas cat (L. colocolo) and northeastern populations of tigrina (L. tigrinus), leading to remarkable cytonuclear discordance in the latter. In contrast, southern tigrina populations show recent and continuing hybridization with Geoffroy's cat (L. geoffroyi), leading to extreme levels of interspecific admixture at their contact zone. Finally, we demonstrate that two seemingly continuous Brazilian tigrina populations show no evidence of ongoing gene flow between them, leading us to support their formal recognition as distinct species, namely L. tigrinus in the northeast and L. guttulus in the south. Copyright © 2013 Elsevier Ltd. All rights reserved.

Hybrid IMRT plans-concurrently treating conventional and IMRT beams for improved breast irradiation and reduced planning time

International Nuclear Information System (INIS)

Mayo, Charles S.; Urie, Marcia M.; Fitzgerald, Thomas J.

2005-01-01

Purpose: To evaluate a hybrid intensity modulated radiation therapy (IMRT) technique as a class solution for treatment of the intact breast. Methods and materials: The following five plan techniques were compared for 10 breast patients using dose-volume histogram analysis: conventional wedged-field tangents (Tangents), forward-planned field-within-a-field tangents (FIF), IMRT-only tangents (IMRT tangents), conventional open plus IMRT tangents (4-field hybrid), and conventional open plus IMRT tangents with 2 anterior oblique IMRT beams (6-field hybrid). Results: The 4-field hybrid and FIF achieved dose distributions better than Tangents and IMRT tangents. The volume of tissue outside the planning target volume receiving ≥110% of prescribed dose was largest for IMRT tangents (average 158 cc) and least for 6-field hybrid (average 1 cc); the FIF and 4-field hybrid were comparable (average 15 cc). Heart volume ≥30 Gy averaged 13 cc for all techniques, except Tangents, for which it was 32 cc. Average total lung volume ≥20 Gy was 7% for all. Contralateral breast doses were < 3% for all. Planning time for hybrid techniques was significantly less than for conventional FIF technique. Conclusions: The 4-field hybrid technique is a viable class solution. The 6-field hybrid technique creates the most conformal dose distribution at the expense of more normal tissue receiving low dose

TiO2/PCL hybrid materials synthesized via sol–gel technique for biomedical applications

International Nuclear Information System (INIS)

Catauro, M.; Bollino, F.; Papale, F.; Marciano, S.; Pacifico, S.

2015-01-01

The aim of the present work has been the synthesis of organic/inorganic hybrid materials based on titanium dioxide and poly(ε-caprolactone) (PCL) to be used in the biomedical field. Several materials have been synthesized using sol–gel methods by adding different amounts of polymer to the inorganic sol. The obtained gels have been characterized using Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The FT-IR data allowed us to hypothesize that the structure formed was that of an interpenetrating network, realized by hydrogen bonds between Ti-OH groups in the sol–gel intermediate species and carbonyl groups in the polymer repeating units. SEM and AFM analyses highlighted that the obtained materials were nanostructurated hybrids. To evaluate the biological properties of the hybrids, their bioactivity and cytotoxicity were investigated as a function of the PCL amount. The bioactivity of the synthesized systems was proven by the formation of a hydroxyapatite layer on the surface of samples soaked in a fluid simulating human blood plasma (SBF). MTT cytotoxicity tests and Trypan Blue dye exclusion tests were carried out exposing NIH-3T3 mouse embryonic fibroblasts for 24 and 48 h to extracts from the investigated hybrid materials. The results showed that all the hybrids had a non-cytotoxic effect on target cells. - Highlights: • TiO 2 /PCL hybrids were obtained by the sol–gel process for biomedical applications. • Synthesized materials were found to be first-class hybrid nanocomposites. • Hybrids appear to be bioactive, a fundamental characteristic for osseointegration. • MTT and Trypan Blue viability test show that the materials are biocompatible. • The organic phase is able to modulate the biocompatibility of the materials

Investigation of some formal aspects of the boson expansion technique in nuclear theory

International Nuclear Information System (INIS)

Pedrocchi, V.G.

1982-01-01

The use of the boson expansion theory (BET) in nuclear physics now has about twenty years history, and a large number of papers is available in the literature. Some of them emphasize BET's practical use, successfully showing that it is in fact a very powerful, practical tool to understand the collective properties in nuclei. Others, on the other hand, concentrated more on formal aspects of the BET, and it is these formal aspects we deal with in this dissertation. The BET is not unique, and thus a variety of methods has been proposed. It was felt that it was desirable to see whether they were in fact different theories, or the difference was only apparent. Actually, at the surface, many theories look different from each other, having various merits and demerits. However, it is possible that they are more closely related than they appear; and, if so, it may be attempted to unify them in such a way that a new BET can be constructed which embodies all the merits of the various theories that have been known so far. With this goal in mind, every detailed comparison of two methods was explored: the commutator method (CM) and the Marumori-Yamamura-Tokunaga (MYT) method, which have been discussed most popularly in the past, though often with controversy. It was found that they are, in fact, equivalent theories if looked at from a particular point of view, although they are not necessarily exactly the same in every aspect. Similar comparison was also made with the generalized Holstein-Primakoff (GHP) and the Dyson methods

A new microcolumn-type microchip for examining the expression of chimeric fusion genes using a nucleic acid sandwich hybridization technique.

Science.gov (United States)

Ohnishi, Michihiro; Sasaki, Naoyuki; Kishimoto, Takuya; Watanabe, Hidetoshi; Takagi, Masatoshi; Mizutani, Shuki; Kishii, Noriyuki; Yasuda, Akio

2014-11-01

We report a new type of microcolumn installed in a microchip. The architecture allows use of a nucleic acid sandwich hybridization technique to detect a messenger RNA (mRNA) chain as a target. Data are presented that demonstrate that the expression of a chimeric fusion gene can be detected. The microcolumn was filled with semi-transparent microbeads made of agarose gel that acted as carriers, allowing increased efficiency of the optical detection of fluorescence from the microcolumn. The hybrid between the target trapped on the microbeads and a probe DNA labeled with a fluorescent dye was detected by measuring the intensity of the fluorescence from the microcolumn directly. These results demonstrate an easy and simple method for determining the expression of chimeric fusion genes with no preamplification. Copyright © 2014 Elsevier B.V. All rights reserved.

New MPPT algorithm for PV applications based on hybrid dynamical approach

KAUST Repository

Elmetennani, Shahrazed

2016-10-24

This paper proposes a new Maximum Power Point Tracking (MPPT) algorithm for photovoltaic applications using the multicellular converter as a stage of power adaptation. The proposed MPPT technique has been designed using a hybrid dynamical approach to model the photovoltaic generator. The hybrid dynamical theory has been applied taking advantage of the particular topology of the multicellular converter. Then, a hybrid automata has been established to optimize the power production. The maximization of the produced solar energy is achieved by switching between the different operative modes of the hybrid automata, which is conditioned by some invariance and transition conditions. These conditions have been validated by simulation tests under different conditions of temperature and irradiance. Moreover, the performance of the proposed algorithm has been then evaluated by comparison with standard MPPT techniques numerically and by experimental tests under varying external working conditions. The results have shown the interesting features that the hybrid MPPT technique presents in terms of performance and simplicity for real time implementation.

New MPPT algorithm for PV applications based on hybrid dynamical approach

KAUST Repository

Elmetennani, Shahrazed; Laleg-Kirati, Taous-Meriem; Djemai, M.; Tadjine, M.

2016-01-01

This paper proposes a new Maximum Power Point Tracking (MPPT) algorithm for photovoltaic applications using the multicellular converter as a stage of power adaptation. The proposed MPPT technique has been designed using a hybrid dynamical approach to model the photovoltaic generator. The hybrid dynamical theory has been applied taking advantage of the particular topology of the multicellular converter. Then, a hybrid automata has been established to optimize the power production. The maximization of the produced solar energy is achieved by switching between the different operative modes of the hybrid automata, which is conditioned by some invariance and transition conditions. These conditions have been validated by simulation tests under different conditions of temperature and irradiance. Moreover, the performance of the proposed algorithm has been then evaluated by comparison with standard MPPT techniques numerically and by experimental tests under varying external working conditions. The results have shown the interesting features that the hybrid MPPT technique presents in terms of performance and simplicity for real time implementation.

Hybrid Integrated Platforms for Silicon Photonics

Science.gov (United States)

Liang, Di; Roelkens, Gunther; Baets, Roel; Bowers, John E.

2010-01-01

A review of recent progress in hybrid integrated platforms for silicon photonics is presented. Integration of III-V semiconductors onto silicon-on-insulator substrates based on two different bonding techniques is compared, one comprising only inorganic materials, the other technique using an organic bonding agent. Issues such as bonding process and mechanism, bonding strength, uniformity, wafer surface requirement, and stress distribution are studied in detail. The application in silicon photonics to realize high-performance active and passive photonic devices on low-cost silicon wafers is discussed. Hybrid integration is believed to be a promising technology in a variety of applications of silicon photonics.

Value impact analysis utilizing PRA techniques combined with a hybrid plant model

International Nuclear Information System (INIS)

Edson, J.L.; Stillwell, D.W.

1989-01-01

A value impact analysis (VIA) has been performed by the INEL to support a NRC Regulatory Analysis for resolution of Generic Issue (GI) 29, Bolting Degradation or Failure in Nuclear Power Plants. A VIA for replacing the reactor coolant pressure boundary (RCPB) bolts of BWRs and PWRs was previously prepared by Pacific Northwest Laboratories in 1985 under instructions limiting the VIA to the potential for failure of primary pressure boundary bolting. Subsequently the INEL was requested to perform a VIA that included non primary systems and component support bolts to be compatible with the resolution of the broader issue. Because the initial list of systems and bolting applications that could be included in the VIA was very large, including them all in the VIA would likely result in analyzing some that have little if any effect on public risk. This paper discusses how PRA techniques combined with a hybrid plant model were used to determine which bolts have the potential to be significant contributors to public risk if they were to fail, and therefore were included in the VIA

Modeling and simulation of a controlled steam generator in the context of dynamic reliability using a Stochastic Hybrid Automaton

International Nuclear Information System (INIS)

Babykina, Génia; Brînzei, Nicolae; Aubry, Jean-François; Deleuze, Gilles

2016-01-01

The paper proposes a modeling framework to support Monte Carlo simulations of the behavior of a complex industrial system. The aim is to analyze the system dependability in the presence of random events, described by any type of probability distributions. Continuous dynamic evolutions of physical parameters are taken into account by a system of differential equations. Dynamic reliability is chosen as theoretical framework. Based on finite state automata theory, the formal model is built by parallel composition of elementary sub-models using a bottom-up approach. Considerations of a stochastic nature lead to a model called the Stochastic Hybrid Automaton. The Scilab/Scicos open source environment is used for implementation. The case study is carried out on an example of a steam generator of a nuclear power plant. The behavior of the system is studied by exploring its trajectories. Possible system trajectories are analyzed both empirically, using the results of Monte Carlo simulations, and analytically, using the formal system model. The obtained results are show to be relevant. The Stochastic Hybrid Automaton appears to be a suitable tool to address the dynamic reliability problem and to model real systems of high complexity; the bottom-up design provides precision and coherency of the system model. - Highlights: • A part of a nuclear power plant is modeled in the context of dynamic reliability. • Stochastic Hybrid Automaton is used as an input model for Monte Carlo simulations. • The model is formally built using a bottom-up approach. • The behavior of the system is analyzed empirically and analytically. • A formally built SHA shows to be a suitable tool to approach dynamic reliability.

Formalized Epistemology, Logic, and Grammar

Science.gov (United States)

Bitbol, Michel

The task of a formal epistemology is defined. It appears that a formal epistemology must be a generalization of "logic" in the sense of Wittgenstein's Tractatus. The generalization is required because, whereas logic presupposes a strict relation between activity and language, this relation may be broken in some domains of experimental enquiry (e.g., in microscopic physics). However, a formal epistemology should also retain a major feature of Wittgenstein's "logic": It must not be a discourse about scientific knowledge, but rather a way of making manifest the structures usually implicit in knowledge-gaining activity. This strategy is applied to the formalism of quantum mechanics.

Model Predictive Control techniques with application to photovoltaic, DC Microgrid, and a multi-sourced hybrid energy system

Science.gov (United States)

Shadmand, Mohammad Bagher

Renewable energy sources continue to gain popularity. However, two major limitations exist that prevent widespread adoption: availability and variability of the electricity generated and the cost of the equipment. The focus of this dissertation is Model Predictive Control (MPC) for optimal sized photovoltaic (PV), DC Microgrid, and multi-sourced hybrid energy systems. The main considered applications are: maximum power point tracking (MPPT) by MPC, droop predictive control of DC microgrid, MPC of grid-interaction inverter, MPC of a capacitor-less VAR compensator based on matrix converter (MC). This dissertation firstly investigates a multi-objective optimization technique for a hybrid distribution system. The variability of a high-penetration PV scenario is also studied when incorporated into the microgrid concept. Emerging (PV) technologies have enabled the creation of contoured and conformal PV surfaces; the effect of using non-planar PV modules on variability is also analyzed. The proposed predictive control to achieve maximum power point for isolated and grid-tied PV systems speeds up the control loop since it predicts error before the switching signal is applied to the converter. The low conversion efficiency of PV cells means we want to ensure always operating at maximum possible power point to make the system economical. Thus the proposed MPPT technique can capture more energy compared to the conventional MPPT techniques from same amount of installed solar panel. Because of the MPPT requirement, the output voltage of the converter may vary. Therefore a droop control is needed to feed multiple arrays of photovoltaic systems to a DC bus in microgrid community. Development of a droop control technique by means of predictive control is another application of this dissertation. Reactive power, denoted as Volt Ampere Reactive (VAR), has several undesirable consequences on AC power system network such as reduction in power transfer capability and increase in

A novel fluorescent in situ hybridization technique for detection of Rickettsia spp. in archival samples

DEFF Research Database (Denmark)

Svendsen, Claus Bo; Boye, Mette; Struve, Carsten

2009-01-01

A novel, sensitive and specific method for detecting Rickettsia spp. in archival samples is described. The method involves the use of fluorescently marked oligonucleotide probes for in situ hybridization. Specific hybridization of Ricekttsia was found without problems of cross-reactions with bact......A novel, sensitive and specific method for detecting Rickettsia spp. in archival samples is described. The method involves the use of fluorescently marked oligonucleotide probes for in situ hybridization. Specific hybridization of Ricekttsia was found without problems of cross...

Software Safety Analysis of Digital Protection System Requirements Using a Qualitative Formal Method

International Nuclear Information System (INIS)

Lee, Jang-Soo; Kwon, Kee-Choon; Cha, Sung-Deok

2004-01-01

The safety analysis of requirements is a key problem area in the development of software for the digital protection systems of a nuclear power plant. When specifying requirements for software of the digital protection systems and conducting safety analysis, engineers find that requirements are often known only in qualitative terms and that existing fault-tree analysis techniques provide little guidance on formulating and evaluating potential failure modes. A framework for the requirements engineering process is proposed that consists of a qualitative method for requirements specification, called the qualitative formal method (QFM), and a safety analysis method for the requirements based on causality information, called the causal requirements safety analysis (CRSA). CRSA is a technique that qualitatively evaluates causal relationships between software faults and physical hazards. This technique, extending the qualitative formal method process and utilizing information captured in the state trajectory, provides specific guidelines on how to identify failure modes and the relationship among them. The QFM and CRSA processes are described using shutdown system 2 of the Wolsong nuclear power plants as the digital protection system example

Primary gamma ray selection in a hybrid timing/imaging Cherenkov array

Directory of Open Access Journals (Sweden)

Postnikov E.B.

2017-01-01

Full Text Available This work is a methodical study on hybrid reconstruction techniques for hybrid imaging/timing Cherenkov observations. This type of hybrid array is to be realized at the gamma-observatory TAIGA intended for very high energy gamma-ray astronomy (> 30 TeV. It aims at combining the cost-effective timing-array technique with imaging telescopes. Hybrid operation of both of these techniques can lead to a relatively cheap way of development of a large area array. The joint approach of gamma event selection was investigated on both types of simulated data: the image parameters from the telescopes, and the shower parameters reconstructed from the timing array. The optimal set of imaging parameters and shower parameters to be combined is revealed. The cosmic ray background suppression factor depending on distance and energy is calculated. The optimal selection technique leads to cosmic ray background suppression of about 2 orders of magnitude on distances up to 450 m for energies greater than 50 TeV.

Application of Hybrid Meta-Heuristic Techniques for Optimal Load Shedding Planning and Operation in an Islanded Distribution Network Integrated with Distributed Generation

Directory of Open Access Journals (Sweden)

Jafar Jallad

2018-05-01

Full Text Available In a radial distribution network integrated with distributed generation (DG, frequency and voltage instability could occur due to grid disconnection, which would result in an islanded network. This paper proposes an optimal load shedding scheme to balance the electricity demand and the generated power of DGs. The integration of the Firefly Algorithm and Particle Swarm Optimization (FAPSO is proposed for the application of the planned load shedding and under frequency load shedding (UFLS scheme. In planning mode, the hybrid optimization maximizes the amount of load remaining and improves the voltage profile of load buses within allowable limits. Moreover, the hybrid optimization can be used in UFLS scheme to identify the optimal combination of loads that need to be shed from a network in operation mode. In order to assess the capabilities of the hybrid optimization, the IEEE 33-bus radial distribution system and part of the Malaysian distribution network with different types of DGs were used. The response of the proposed optimization method in planning and operation were compared with other optimization techniques. The simulation results confirmed the effectiveness of the proposed hybrid optimization in planning mode and demonstrated that the proposed UFLS scheme is quick enough to restore the system frequency without overshooting in less execution time.

Day-ahead electricity prices forecasting by a modified CGSA technique and hybrid WT in LSSVM based scheme

International Nuclear Information System (INIS)

Shayeghi, H.; Ghasemi, A.

2013-01-01

Highlights: • Presenting a hybrid CGSA-LSSVM scheme for price forecasting. • Considering uncertainties for filtering in input data and feature selection to improve efficiency. • Using DWT input featured LSSVM approach to classify next-week prices. • Used three real markets to illustrate performance of the proposed price forecasting model. - Abstract: At the present time, day-ahead electricity market is closely associated with other commodity markets such as fuel market and emission market. Under such an environment, day-ahead electricity price forecasting has become necessary for power producers and consumers in the current deregulated electricity markets. Seeking for more accurate price forecasting techniques, this paper proposes a new combination of a Feature Selection (FS) technique based mutual information (MI) technique and Wavelet Transform (WT) in this study. Moreover, in this paper a new modified version of Gravitational Search Algorithm (GSA) optimization based chaos theory, namely Chaotic Gravitational Search Algorithm (CGSA) is developed to find the optimal parameters of Least Square Support Vector Machine (LSSVM) to predict electricity prices. The performance and price forecast accuracy of the proposed technique is assessed by means of real data from Iran’s, Ontario’s and Spain’s price markets. The simulation results from numerical tables and figures in different cases show that the proposed technique increases electricity price market forecasting accuracy than the other classical and heretical methods in the scientific researches

Formalization of the Integral Calculus in the PVS Theorem Prover

Directory of Open Access Journals (Sweden)

Ricky Wayne Butler

2009-04-01

Full Text Available The PVS Theorem prover is a widely used formal verification tool used for the analysis of safetycritical systems. The PVS prover, though fully equipped to support deduction in a very general logic framework, namely higher-order logic, it must nevertheless, be augmented with the definitions and associated theorems for every branch of mathematics and Computer Science that is used in a verification. This is a formidable task, ultimately requiring the contributions of researchers and developers all over the world. This paper reports on the formalization of the integral calculus in the PVS theorem prover. All of the basic definitions and theorems covered in a first course on integral calculus have been completed.The theory and proofs were based on Rosenlicht’s classic text on real analysis and follow the traditional epsilon-delta method. The goal of this work was to provide a practical set of PVS theories that could be used for verification of hybrid systems that arise in air traffic management systems and other aerospace applications. All of the basic linearity, integrability, boundedness, and continuity properties of the integral calculus were proved. The work culminated in the proof of the Fundamental Theorem Of Calculus. There is a brief discussion about why mechanically checked proofs are so much longer than standard mathematics textbook proofs.

Characterization and Curing Kinetics of Epoxy/Silica Nano-Hybrids

Science.gov (United States)

Yang, Cheng-Fu; Wang, Li-Fen; Wu, Song-Mao; Su, Chean-Cheng

2015-01-01

The sol-gel technique was used to prepare epoxy/silica nano-hybrids. The thermal characteristics, curing kinetics and structure of epoxy/silica nano-hybrids were studied using differential scanning calorimetry (DSC), 29Si nuclear magnetic resonance (NMR) and transmission electron microscopy (TEM). To improve the compatibility between the organic and inorganic phases, a coupling agent was used to modify the diglycidyl ether of bisphenol A (DGEBA) epoxy. The sol-gel technique enables the silica to be successfully incorporated into the network of the hybrids, increasing the thermal stability and improving the mechanical properties of the prepared epoxy/silica nano-hybrids. An autocatalytic mechanism of the epoxy/SiO2 nanocomposites was observed. The low reaction rate of epoxy in the nanocomposites is caused by the steric hindrance in the network of hybrids that arises from the consuming of epoxide group in the network of hybrids by the silica. In the nanocomposites, the nano-scale silica particles had an average size of approximately 35 nm, and the particles were well dispersed in the epoxy matrix, according to the TEM images. PMID:28793616

Indigenous Knowledge and Education from the Quechua Community to School: Beyond the Formal/Non-Formal Dichotomy

Science.gov (United States)

Sumida Huaman, Elizabeth; Valdiviezo, Laura Alicia

2014-01-01

In this article, we propose to approach Indigenous education beyond the formal/non-formal dichotomy. We argue that there is a critical need to conscientiously include Indigenous knowledge in education processes from the school to the community; particularly, when formal systems exclude Indigenous cultures and languages. Based on ethnographic…

New procedure for departure formalities

CERN Multimedia

HR & GS Departments

2011-01-01

As part of the process of simplifying procedures and rationalising administrative processes, the HR and GS Departments have introduced new personalised departure formalities on EDH. These new formalities have applied to students leaving CERN since last year and from 17 October 2011 this procedure will be extended to the following categories of CERN personnel: Staff members, Fellows and Associates. It is planned to extend this electronic procedure to the users in due course. What purpose do departure formalities serve? The departure formalities are designed to ensure that members of the personnel contact all the relevant services in order to return any necessary items (equipment, cards, keys, dosimeter, electronic equipment, books, etc.) and are aware of all the benefits to which they are entitled on termination of their contract. The new departure formalities on EDH have the advantage of tailoring the list of services that each member of the personnel must visit to suit his individual contractual and p...

Analysis of tribological behaviour of zirconia reinforced Al-SiC hybrid composites using statistical and artificial neural network technique

Science.gov (United States)

Arif, Sajjad; Tanwir Alam, Md; Ansari, Akhter H.; Bilal Naim Shaikh, Mohd; Arif Siddiqui, M.

2018-05-01

The tribological performance of aluminium hybrid composites reinforced with micro SiC (5 wt%) and nano zirconia (0, 3, 6 and 9 wt%) fabricated through powder metallurgy technique were investigated using statistical and artificial neural network (ANN) approach. The influence of zirconia reinforcement, sliding distance and applied load were analyzed with test based on full factorial design of experiments. Analysis of variance (ANOVA) was used to evaluate the percentage contribution of each process parameters on wear loss. ANOVA approach suggested that wear loss be mainly influenced by sliding distance followed by zirconia reinforcement and applied load. Further, a feed forward back propagation neural network was applied on input/output date for predicting and analyzing the wear behaviour of fabricated composite. A very close correlation between experimental and ANN output were achieved by implementing the model. Finally, ANN model was effectively used to find the influence of various control factors on wear behaviour of hybrid composites.

Improved helicopter aeromechanical stability analysis using segmented constrained layer damping and hybrid optimization

Science.gov (United States)

Liu, Qiang; Chattopadhyay, Aditi

2000-06-01

Aeromechanical stability plays a critical role in helicopter design and lead-lag damping is crucial to this design. In this paper, the use of segmented constrained damping layer (SCL) treatment and composite tailoring is investigated for improved rotor aeromechanical stability using formal optimization technique. The principal load-carrying member in the rotor blade is represented by a composite box beam, of arbitrary thickness, with surface bonded SCLs. A comprehensive theory is used to model the smart box beam. A ground resonance analysis model and an air resonance analysis model are implemented in the rotor blade built around the composite box beam with SCLs. The Pitt-Peters dynamic inflow model is used in air resonance analysis under hover condition. A hybrid optimization technique is used to investigate the optimum design of the composite box beam with surface bonded SCLs for improved damping characteristics. Parameters such as stacking sequence of the composite laminates and placement of SCLs are used as design variables. Detailed numerical studies are presented for aeromechanical stability analysis. It is shown that optimum blade design yields significant increase in rotor lead-lag regressive modal damping compared to the initial system.

An Advanced Environment for Hybrid Modeling of Biological Systems Based on Modelica

Directory of Open Access Journals (Sweden)

Proß Sabrina

2011-03-01

Full Text Available Biological systems are often very complex so that an appropriate formalism is needed for modeling their behavior. Hybrid Petri Nets, consisting of time-discrete Petri Net elements as well as continuous ones, have proven to be ideal for this task. Therefore, a new Petri Net library was implemented based on the object-oriented modeling language Modelica which allows the modeling of discrete, stochastic and continuous Petri Net elements by differential, algebraic and discrete equations. An appropriate Modelica-tool performs the hybrid simulation with discrete events and the solution of continuous differential equations. A special sub-library contains so-called wrappers for specific reactions to simplify the modeling process.

Formal verification of reactor process control software using assertion checking environment

International Nuclear Information System (INIS)

Sharma, Babita; Balaji, Sowmya; John, Ajith K.; Bhattacharjee, A.K.; Dhodapkar, S.D.

2005-01-01

Assertion Checking Environment (ACE) was developed in-house for carrying out formal (rigorous/ mathematical) functional verification of embedded software written in MISRA C. MISRA C is an industrially sponsored safe sub-set of C programming language and is well accepted in the automotive and aerospace industries. ACE uses static assertion checking technique for verification of MISRA C programs. First the functional specifications of the program are derived from the specifications in the form of pre- and post-conditions for each C function. These pre- and post-conditions are then introduced as assertions (formal comments) in the program code. The annotated C code is then formally verified using ACE. In this paper we present our experience of using ACE for the formal verification of process control software of a nuclear reactor. The Software Requirements Document (SRD) contained textual specifications of the process control software. The SRD was used by the designers to draw logic diagrams which were given as input to a code generator. The verification of the generated C code was done at 2 levels viz. (i) verification against specifications derived from logic diagrams, and (ii) verification against specifications derived from SRD. In this work we checked approximately 600 functional specifications of the software having roughly 15000 lines of code. (author)

Cosmological dynamics of a hybrid chameleon scenario

OpenAIRE

Nozari, Kourosh; Rashidi, N.

2013-01-01

We consider a hybrid scalar field which is non-minimally coupled to the matter and models a chameleon cosmology. By introducing an effective potential, we study the dependence of the effective potential's minimum and hybrid chameleon field's masses to the local matter density. In a dynamical system technique, we analyze the phase space of this two-field chameleon model, find its fixed points and study their stability. We show that the hybrid chameleon domination solution is a stable attractor...

Concepts of formal concept analysis

Science.gov (United States)

Žáček, Martin; Homola, Dan; Miarka, Rostislav

2017-07-01

The aim of this article is apply of Formal Concept Analysis on concept of world. Formal concept analysis (FCA) as a methodology of data analysis, information management and knowledge representation has potential to be applied to a verity of linguistic problems. FCA is mathematical theory for concepts and concept hierarchies that reflects an understanding of concept. Formal concept analysis explicitly formalizes extension and intension of a concept, their mutual relationships. A distinguishing feature of FCA is an inherent integration of three components of conceptual processing of data and knowledge, namely, the discovery and reasoning with concepts in data, discovery and reasoning with dependencies in data, and visualization of data, concepts, and dependencies with folding/unfolding capabilities.

Optimization of the design of thick, segmented scintillators for megavoltage cone-beam CT using a novel, hybrid modeling technique

Energy Technology Data Exchange (ETDEWEB)

Liu, Langechuan; Antonuk, Larry E., E-mail: antonuk@umich.edu; El-Mohri, Youcef; Zhao, Qihua; Jiang, Hao [Department of Radiation Oncology, University of Michigan, Ann Arbor, Michigan 48109 (United States)

2014-06-15

Purpose: Active matrix flat-panel imagers (AMFPIs) incorporating thick, segmented scintillators have demonstrated order-of-magnitude improvements in detective quantum efficiency (DQE) at radiotherapy energies compared to systems based on conventional phosphor screens. Such improved DQE values facilitate megavoltage cone-beam CT (MV CBCT) imaging at clinically practical doses. However, the MV CBCT performance of such AMFPIs is highly dependent on the design parameters of the scintillators. In this paper, optimization of the design of segmented scintillators was explored using a hybrid modeling technique which encompasses both radiation and optical effects. Methods: Imaging performance in terms of the contrast-to-noise ratio (CNR) and spatial resolution of various hypothetical scintillator designs was examined through a hybrid technique involving Monte Carlo simulation of radiation transport in combination with simulation of optical gain distributions and optical point spread functions. The optical simulations employed optical parameters extracted from a best fit to measurement results reported in a previous investigation of a 1.13 cm thick, 1016μm pitch prototype BGO segmented scintillator. All hypothetical designs employed BGO material with a thickness and element-to-element pitch ranging from 0.5 to 6 cm and from 0.508 to 1.524 mm, respectively. In the CNR study, for each design, full tomographic scans of a contrast phantom incorporating various soft-tissue inserts were simulated at a total dose of 4 cGy. Results: Theoretical values for contrast, noise, and CNR were found to be in close agreement with empirical results from the BGO prototype, strongly supporting the validity of the modeling technique. CNR and spatial resolution for the various scintillator designs demonstrate complex behavior as scintillator thickness and element pitch are varied—with a clear trade-off between these two imaging metrics up to a thickness of ∼3 cm. Based on these results, an

Critical formalism or digital biomorphology. The contemporary architecture formal dilema

Directory of Open Access Journals (Sweden)

Beatriz Villanueva Cajide

2018-05-01

Full Text Available With the dawn of digital media the architecture’s formal possibilities reached a level unknown before. The Guggenheim Museo branch in Bilbao appears in 1993 as the materialisation of the possibilities of the use of digital tools in architecture’s design, starting the development of a digital based architecture which currently has reached an exhaustion level that is evident in the repetition biomorphologic shapes emerged from the digital determinism to which some contemporary architectural practices have converged. While the digitalisation of the architectural process is irreversible and desirable, it is necessary to rethink the terms of this collaboration beyond the possibilities of the digital tools themselves. This article proposes to analyse seven texts written in the very moment when digitalisation became a real possibility, between Gehry’s conception of the Guggenheim Museum in 1992 and the Congress on Morphogenesis hold in the Architectural Association in 2004, in order to explore the possibility of reversing the process that has led to the formal exhaustion of digital architecture, from the acceptance of incorporating strategies coming from a contemporary critical formalism.

Y-formalism and b ghost in the non-minimal pure spinor formalism of superstrings

International Nuclear Information System (INIS)

Oda, Ichiro; Tonin, Mario

2007-01-01

We present the Y-formalism for the non-minimal pure spinor quantization of superstrings. In the framework of this formalism we compute, at the quantum level, the explicit form of the compound operators involved in the construction of the b ghost, their normal-ordering contributions and the relevant relations among them. We use these results to construct the quantum-mechanical b ghost in the non-minimal pure spinor formalism. Moreover we show that this non-minimal b ghost is cohomologically equivalent to the non-covariant b ghost

Preparation and characterization of hybrid A359/(SiC+Si{sub 3}N{sub 4}) composites synthesized by stir/squeeze casting techniques

Energy Technology Data Exchange (ETDEWEB)

Shalaby, Essam A.M.; Churyumov, Alexander Yu., E-mail: churyumov@misis.ru; Solonin, Alexey N.; Lotfy, A.

2016-09-30

Stir followed by squeeze casting techniques were used to produce A359 composites containing different weight percentage of (SiC+Si{sub 3}N{sub 4}) particles. Microstructures of the composites showed a homogeneous and even distribution of hybrid reinforcements within the matrix. Moreover, particles agglomerations, residual porosity, and other casting problems were not noticed. Interfacial reactions between the particles and the matrix were investigated using X-ray diffraction and energy dispersive X-ray analyses. The presence of particles in squeezed composites did not only increase the peak hardness of the composites, but also accelerated the aging kinetics. As compared with the A359 matrix alloy, a compression test of the hybrid composites exhibited a significant increase in the yield and the ultimate compressive strengths with a relative reduction in the failure strain. Finite element modeling of the composite compression showed that strain concentration near large SiC particles is the main reason for low ductility of the composite. The development of those lightweight hybrid composites with high mechanical properties has a high potential to be used for automotive and aerospace applications.

Formal Testing of Correspondence Carrying Software

NARCIS (Netherlands)

Bujorianu, M.C.; Bujorianu, L.M.; Maharaj, S.

2008-01-01

Nowadays formal software development is characterised by use of multitude formal specification languages. Test case generation from formal specifications depends in general on a specific language, and, moreover, there are competing methods for each language. There is a need for a generic approach to

A Polar Fuzzy Control Scheme for Hybrid Power System Using Vehicle-To-Grid Technique

Directory of Open Access Journals (Sweden)

Mohammed Elsayed Lotfy

2017-07-01

Full Text Available A novel polar fuzzy (PF control approach for a hybrid power system is proposed in this research. The proposed control scheme remedies the issues of system frequency and the continuity of demand supply caused by renewable sources’ uncertainties. The hybrid power system consists of a wind turbine generator (WTG, solar photovoltaics (PV, a solar thermal power generator (STPG, a diesel engine generator (DEG, an aqua-electrolyzer (AE, an ultra-capacitor (UC, a fuel-cell (FC, and a flywheel (FW. Furthermore, due to the high cost of the battery energy storage system (BESS, a new idea of vehicle-to-grid (V2G control is applied to use the battery of the electric vehicle (EV as equivalent to large-scale energy storage units instead of small batteries to improve the frequency stability of the system. In addition, EV customers’ convenience is taken into account. A minimal-order observer is used to estimate the supply error. Then, the area control error (ACE signal is calculated in terms of the estimated supply error and the frequency deviation. ACE is considered in the frequency domain. Two PF approaches are utilized in the intended system. The mission of each controller is to mitigate one frequency component of ACE. The responsibility for ACE compensation is shared among all parts of the system according to their speed of response. The performance of the proposed control scheme is compared to the conventional fuzzy logic control (FLC. The effectiveness and robustness of the proposed control technique are verified by numerical simulations under various scenarios.

Formal Women-only Networks

DEFF Research Database (Denmark)

Villesèche, Florence; Josserand, Emmanuel

2017-01-01

/organisations and the wider social group of women in business. Research limitations/implications: The authors focus on the distinction between external and internal formal women-only networks while also acknowledging the broader diversity that can characterise such networks. Their review provides the reader with an insight...... member level, the authors suggest that such networks can be of value for organisations and the wider social group of women in management and leadership positions.......Purpose: The purpose of this paper is to review the emerging literature on formal women-only business networks and outline propositions to develop this under-theorised area of knowledge and stimulate future research. Design/methodology/approach: The authors review the existing literature on formal...

A mathematical technique for hybrid power system design with energy loss considerations

International Nuclear Information System (INIS)

Lee, Jui-Yuan; Chen, Cheng-Liang; Chen, Hui-Chu

2014-01-01

Highlights: • A superstructure-based model is developed for hybrid power system design. • The model considers various power losses occurring in hybrid power systems. • The model locates rigorous outsourced electricity targets. • The model determines the minimum electricity storage capacity required. • Three literature case studies are solved to demonstrate the use of the model. - Abstract: This paper presents a generic mathematical optimisation model for the design of hybrid power systems (HPSs). The model takes into account power losses during the allocation of power generated from renewables to appliance loads, and is formulated as a linear programme (LP) based on a superstructure including all possible power allocation options in a typical HPS. With given power source and demand data for an HPS, the minimum outsourced electricity supply and the minimum electricity storage capacity required can be determined through a two-step optimisation. Three literature case studies are solved to illustrate the proposed approach

Application of DNA hybridization techniques in the assessment of diarrheal disease among refugess in Thailand. [Shigella; Escherichia coli; Campylobacter; Cryptosporidium

Energy Technology Data Exchange (ETDEWEB)

Taylor, D.N.; Echeverria, P.; Pitarangsi, C.; Seriwatana, J.; Sethabutr, O.; Bodhidatta, L.; Brown, C.; Herrmann, J.E.; Blacklow, N.R.

1988-01-01

The epidemiology and etiology of acute diarrheal disease were determined in a Hmong refugee camp on the Thai-Laotian border from April 11 to May 14, 1985. DNA hybridization techniques were used to detect Shigella species, enteroinvasive Escherichia coli, and enterotoxigenic E. coli. A monoclonal enzyme-linked immunosorbent assay was used to detect rotavirus, and standard microbiology was used to detect other enteropathogens. The age-specific diarrheal disease rates were 47 episodes per month per 1000 children less than five years old and 113 episodes per month per 1000 children less than one year old. Rotavirus, enterotoxigenic E. coli, Campylobacter, and Cryptosporidium were the predominant pathogens in children less than two years old. The DNA probe hybridized with 94% of 31 specimens identified as enterotoxigenic E. coli by the standard assays and with none of the specimens in which the standard assays were negative. The probe for Shigella and enteroinvasive E. coli hybridized in eight of 10 stools that contained Shigella and four of 314 stools from which Shigella and enteroinvasive E. coli were not isolated. The use of DNA probes allows specimens to be collected in remote areas with a minimum amount of equipment and technical expertise so that they can be easily transported to a central laboratory for further processing.

Hybrid Integrated Platforms for Silicon Photonics

Directory of Open Access Journals (Sweden)

John E. Bowers

2010-03-01

Full Text Available A review of recent progress in hybrid integrated platforms for silicon photonics is presented. Integration of III-V semiconductors onto silicon-on-insulator substrates based on two different bonding techniques is compared, one comprising only inorganic materials, the other technique using an organic bonding agent. Issues such as bonding process and mechanism, bonding strength, uniformity, wafer surface requirement, and stress distribution are studied in detail. The application in silicon photonics to realize high-performance active and passive photonic devices on low-cost silicon wafers is discussed. Hybrid integration is believed to be a promising technology in a variety of applications of silicon photonics.

Using CASE-tools based on formal methods in real-life system development of distributed systems

International Nuclear Information System (INIS)

Stoelen, Ketil; Karlsen, Tore Willy; Mohn, Peter; Sandmark, Haaakon

1998-03-01

Within the OECD Halden Reactor Project (HRP) the development and application of formal methods to enhance system quality have been prioritised tasks for the last three years per periods. The three year programme 1997-1999 identifies the need to gain experience from applying formal methods in larger real-life system developments. This motivated the initiation of the HRP research activity Integration of Formal Specification in the Development of HAMMLAB 2000 (INT-FS). The principal objective of INT-FS is to experiment with formal methods in system developments connected to HAMMLAB 2000 and thereby gain a better understanding of their suitability to support practical software engineering. In particular, INT-FS will try to measure the effect of formal methods and gain experience in combining formal methods with traditional development techniques. INT-FS was started up in January 1997. This report describes the status of INT-FS by February 1998. The report identifies objectives and plans; it motivates the choice of formal methods, CASE-tool and software process; it motivates and defines metrics for measuring achievement and the effect of formalization. The report also provides preliminary results from an experimental development of a communication manager; it describes the component to be developed and the background of the participants; it offers some provisional statistics and summarises the experiences with methods and tools. The development of the communication manager is the first attempt ever to exploit state-of-the-art CASE-tools for formal methods in practical software engineering at the HRP. (author)

Formal analysis of design process dynamics

NARCIS (Netherlands)

Bosse, T.; Jonker, C.M.; Treur, J.

2010-01-01

This paper presents a formal analysis of design process dynamics. Such a formal analysis is a prerequisite to come to a formal theory of design and for the development of automated support for the dynamics of design processes. The analysis was geared toward the identification of dynamic design

Formal Analysis of Design Process Dynamics

NARCIS (Netherlands)

Bosse, T.; Jonker, C.M.; Treur, J.

2010-01-01

This paper presents a formal analysis of design process dynamics. Such a formal analysis is a prerequisite to come to a formal theory of design and for the development of automated support for the dynamics of design processes. The analysis was geared toward the identification of dynamic design

Influence of the polymer amount on bioactivity and biocompatibility of SiO{sub 2}/PEG hybrid materials synthesized by sol–gel technique

Energy Technology Data Exchange (ETDEWEB)

Catauro, M., E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Bollino, F.; Papale, F. [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Gallicchio, M.; Pacifico, S. [Department of Environmental Biological and Pharmaceutical Sciences and Technologies, Second University of Naples, Via Vivaldi 43, 81100 Caserta (Italy)

2015-03-01

SiO{sub 2}/PEG organic–inorganic hybrid materials, which differ in polyethylene glycol (PEG) content, were synthesized by sol–gel technique and the characterization of their structure and biological properties was carried out in order to evaluate the possible use in biomedical field. FT-IR spectroscopy detected that the two components of the hybrids (SiO{sub 2} and PEG) are linked by hydrogen bonds between the Si–OH groups of the inorganic phase and the terminal alcoholic groups and/or the ethereal oxygen atoms in the repeating units of polymer. X-ray diffraction analysis ascertained the amorphous nature of the gels and the observation of their morphology by SEM microscopy confirmed that the interpenetration of the two phases (organic and inorganic) occurs on nanometric scale. The biological characterization was carried out as a function of the polymer amount to study its influence on material behavior. The results showed that the synthesized materials were bioactive and biocompatible. The formation of a hydroxyapatite layer, indeed, was observed on their surface by SEM/EDX analysis after soaking in simulated body fluid. Moreover, the biocompatibility of SiO{sub 2}/PEG hybrids was assessed performing MTT and SRB cytotoxicity tests on fibroblast cell NIH 3T3 after 24 and 48 h of exposure, as well as Trypan Blue dye exclusion test. The response to the presence of the investigated materials was positive. The cell growth and proliferation showed dependence on polymer amount and time of exposure to the material extracts. Therefore, the obtained results are encouraging for the use of the obtained hybrids in dental or orthopedic applications. - Highlights: • SiO{sub 2}/PEG hybrid biomaterials synthesized by sol–gel method at various PEG percentages • Chemical and morphological characterization of hybrid materials • Chemical interactions between inorganic and organic components • Biological characterizations with MTT and SRB cytotoxicity tests �

Hybrid Firefly Variants Algorithm for Localization Optimization in WSN

Directory of Open Access Journals (Sweden)

P. SrideviPonmalar

2017-01-01

Full Text Available Localization is one of the key issues in wireless sensor networks. Several algorithms and techniques have been introduced for localization. Localization is a procedural technique of estimating the sensor node location. In this paper, a novel three hybrid algorithms based on firefly is proposed for localization problem. Hybrid Genetic Algorithm-Firefly Localization Algorithm (GA-FFLA, Hybrid Differential Evolution-Firefly Localization Algorithm (DE-FFLA and Hybrid Particle Swarm Optimization -Firefly Localization Algorithm (PSO-FFLA are analyzed, designed and implemented to optimize the localization error. The localization algorithms are compared based on accuracy of estimation of location, time complexity and iterations required to achieve the accuracy. All the algorithms have hundred percent estimation accuracy but with variations in the number of firefliesr requirements, variation in time complexity and number of iteration requirements. Keywords: Localization; Genetic Algorithm; Differential Evolution; Particle Swarm Optimization

Formalizing the concept of sound.

Energy Technology Data Exchange (ETDEWEB)

Kaper, H. G.; Tipei, S.

1999-08-03

The notion of formalized music implies that a musical composition can be described in mathematical terms. In this article we explore some formal aspects of music and propose a framework for an abstract approach.

Formal Analysis of Domain Models

National Research Council Canada - National Science Library

Bharadwaj, Ramesh

2002-01-01

Recently, there has been a great deal of interest in the application of formal methods, in particular, precise formal notations and automatic analysis tools for the creation and analysis of requirements specifications (i.e...

Dissipative dynamics of superconducting hybrid qubit systems

International Nuclear Information System (INIS)

Montes, Enrique; Calero, Jesus M; Reina, John H

2009-01-01

We perform a theoretical study of composed superconducting qubit systems for the case of a coupled qubit configuration based on a hybrid qubit circuit made of both charge and phase qubits, which are coupled via a σ x x σ z interaction. We compute the system's eigen-energies in terms of the qubit transition frequencies and the strength of the inter-qubit coupling, and describe the sensitivity of the energy crossing/anti-crossing features to such coupling. We compute the hybrid system's dissipative dynamics for the cases of i) collective and ii) independent decoherence, whereby the system interacts with one common and two different baths of harmonic oscillators, respectively. The calculations have been performed within the Bloch-Redfield formalism and we report the solutions for the populations and the coherences of the system's reduced density matrix. The dephasing and relaxation rates are explicitly calculated as a function of the heat bath temperature.

Dissipative dynamics of superconducting hybrid qubit systems

Energy Technology Data Exchange (ETDEWEB)

Montes, Enrique; Calero, Jesus M; Reina, John H, E-mail: enriquem@univalle.edu.c, E-mail: j.reina-estupinan@physics.ox.ac.u [Departamento de Fisica, Universidad del Valle, A.A. 25360, Cali (Colombia)

2009-05-01

We perform a theoretical study of composed superconducting qubit systems for the case of a coupled qubit configuration based on a hybrid qubit circuit made of both charge and phase qubits, which are coupled via a sigma{sub x} x sigma{sub z} interaction. We compute the system's eigen-energies in terms of the qubit transition frequencies and the strength of the inter-qubit coupling, and describe the sensitivity of the energy crossing/anti-crossing features to such coupling. We compute the hybrid system's dissipative dynamics for the cases of i) collective and ii) independent decoherence, whereby the system interacts with one common and two different baths of harmonic oscillators, respectively. The calculations have been performed within the Bloch-Redfield formalism and we report the solutions for the populations and the coherences of the system's reduced density matrix. The dephasing and relaxation rates are explicitly calculated as a function of the heat bath temperature.

Conformal techniques in string theory and string field theory

International Nuclear Information System (INIS)

Giddings, S.B.

1987-01-01

The application of some conformal and Riemann surface techniques to string theory and string field theory is described. First a brief review of Riemann surface techniques and of the Polyakov approach to string theory is presented. This is followed by a discussion of some features of string field theory and of its Feynman rules. Specifically, it is shown that the Feynman diagrams for Witten's string field theory respect modular invariance, and in particular give a triangulation of moduli space. The Polyakov formalism is then used to derive the Feynman rules that should follow from this theory upon gauge-fixing. It should also be possible to apply this derivation to deduce the Feynman rules for other gauge-fixed string field theories. Following this, Riemann surface techniques are turned to the problem of proving the equivalence of the Polyakov and light-cone formalisms. It is first shown that the light-cone diagrams triangulate moduli space. Then the Polyakov measure is worked out for these diagrams, and shown to equal that deduced from the light-cone gauge fixed formalism. Also presented is a short description of the comparison of physical states in the two formalisms. The equivalence of the two formalisms in particular constitutes a proof of the unitarity of the Polyakov framework for the closed bosonic string

TiO{sub 2}/PCL hybrid materials synthesized via sol–gel technique for biomedical applications

Energy Technology Data Exchange (ETDEWEB)

Catauro, M., E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Bollino, F.; Papale, F. [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Marciano, S.; Pacifico, S. [Department Environmental, Biological and Pharmaceutical Sciences and Technologies, Second University of Naples, Via Vivaldi 43, 81100 Caserta (Italy)

2015-02-01

The aim of the present work has been the synthesis of organic/inorganic hybrid materials based on titanium dioxide and poly(ε-caprolactone) (PCL) to be used in the biomedical field. Several materials have been synthesized using sol–gel methods by adding different amounts of polymer to the inorganic sol. The obtained gels have been characterized using Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The FT-IR data allowed us to hypothesize that the structure formed was that of an interpenetrating network, realized by hydrogen bonds between Ti-OH groups in the sol–gel intermediate species and carbonyl groups in the polymer repeating units. SEM and AFM analyses highlighted that the obtained materials were nanostructurated hybrids. To evaluate the biological properties of the hybrids, their bioactivity and cytotoxicity were investigated as a function of the PCL amount. The bioactivity of the synthesized systems was proven by the formation of a hydroxyapatite layer on the surface of samples soaked in a fluid simulating human blood plasma (SBF). MTT cytotoxicity tests and Trypan Blue dye exclusion tests were carried out exposing NIH-3T3 mouse embryonic fibroblasts for 24 and 48 h to extracts from the investigated hybrid materials. The results showed that all the hybrids had a non-cytotoxic effect on target cells. - Highlights: • TiO{sub 2}/PCL hybrids were obtained by the sol–gel process for biomedical applications. • Synthesized materials were found to be first-class hybrid nanocomposites. • Hybrids appear to be bioactive, a fundamental characteristic for osseointegration. • MTT and Trypan Blue viability test show that the materials are biocompatible. • The organic phase is able to modulate the biocompatibility of the materials.

The Integration of Formal and Non-formal Education: The Dutch “brede school”

Directory of Open Access Journals (Sweden)

du Bois-Reymond, Manuela

2009-12-01

Full Text Available The Dutch “brede school” (BS development originates in the 1990s and has spread unevenly since: quicker in the primary than secondary educational sector. In 2007, there were about 1000 primary and 350 secondary BS schools and it is the intention of the government as well as the individual municipalities to extend that number and make the BS the dominant school form of the near future. In the primary sector, a BS cooperates with crèche and preschool facilities, besides possible other neighborhood partners. The main targets are, first, to enhance educational opportunities, particularly for children with little (western- cultural capital, and secondly to increase women’s labor market participation by providing extra familial care for babies and small children. All primary schools are now obliged to provide such care. In the secondary sector, a BS is less neighborhood-orientated than a primary BS because those schools are bigger and more often located in different buildings. As in the primary sector, there are broad and more narrow BS, the first profile cooperating with many non-formal and other partners and facilities and the second with few. On the whole, there is a wide variety of BS schools, with different profiles and objectives, dependent on the needs and wishes of the initiators and the neighborhood. A BS is always the result of initiatives of the respective school and its partners: parents, other neighborhood associations, municipality etc. BS schools are not enforced by the government although the general trend will be that existing school organizations transform into BS. The integration of formal and non-formal education and learning is more advanced in primary than secondary schools. In secondary education, vocational as well as general, there is a clear dominance of formal education; the non-formal curriculum serves mainly two lines and objectives: first, provide attractive leisure activities and second provide compensatory

Comparison of the decomposition characteristics of aromatic VOCs using an electron beam hybrid system

International Nuclear Information System (INIS)

Son, Youn-Suk; Kim, Ki-Joon; Kim, Ji-Yong; Kim, Jo-Chun

2010-01-01

We applied a hybrid technique to assess the decomposition characteristics of ethylbenzene and toluene that annexed the catalyst technique with existing electron beam (EB) technology. The removal efficiency of ethylbenzene in the EB-catalyst hybrid turned out to be 30% greater than that of EB-only treatment. We concluded that ethylbenzene was decomposed more easily than toluene by EB irradiation. We compared the independent effects of the EB-catalyst hybrid and catalyst-only methods, and observed that the efficiency of the EB-catalyst hybrid demonstrated approximately 6% improvement for decomposing toluene and 20% improvement for decomposing ethylbenzene. The G-values for ethylbenzene increased with initial concentration and reactor type: for example, the G-values by reactor type at 2800 ppmC were 7.5-10.9 (EB-only) and 12.9-25.7 (EB-catalyst hybrid). We also observed a significant decrease in by-products as well as in the removal efficiencies associated with the EB-catalyst hybrid technique.

Comparison of the decomposition characteristics of aromatic VOCs using an electron beam hybrid system

Science.gov (United States)

Son, Youn-Suk; Kim, Ki-Joon; Kim, Ji-Yong; Kim, Jo-Chun

2010-12-01

We applied a hybrid technique to assess the decomposition characteristics of ethylbenzene and toluene that annexed the catalyst technique with existing electron beam (EB) technology. The removal efficiency of ethylbenzene in the EB-catalyst hybrid turned out to be 30% greater than that of EB-only treatment. We concluded that ethylbenzene was decomposed more easily than toluene by EB irradiation. We compared the independent effects of the EB-catalyst hybrid and catalyst-only methods, and observed that the efficiency of the EB-catalyst hybrid demonstrated approximately 6% improvement for decomposing toluene and 20% improvement for decomposing ethylbenzene. The G-values for ethylbenzene increased with initial concentration and reactor type: for example, the G-values by reactor type at 2800 ppmC were 7.5-10.9 (EB-only) and 12.9-25.7 (EB-catalyst hybrid). We also observed a significant decrease in by-products as well as in the removal efficiencies associated with the EB-catalyst hybrid technique.

Hybrid manganese oxide films for supercapacitor application prepared by sol-gel technique

International Nuclear Information System (INIS)

Chen, Chin-Yi; Wang, Sheng-Chang; Tien, Yue-Han; Tsai, Wen-Ta; Lin, Chung-Kwei

2009-01-01

Hybrid films were prepared by adding various concentrations of meso-carbon microbeads (MCMB) during sol-gel processing of manganese oxide films. The heat-treated films were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). In addition, electrochemical performance of the MCMB-added Mn-oxide hybrid coatings was evaluated by cyclic voltammetry (CV) and compared with its unadded counterpart. Experimental results showed that Mn-oxide films exhibited a mixture of Mn 2 O 3 and Mn 3 O 4 phases. The higher the heat-treatment temperature, the more Mn 2 O 3 can be observed. The specific capacitance of the unadded Mn-oxide electrodes is 209 F/g. Because the MCMB particles provide more interfacial surface area for electrochemical reactions, a significant improvement can be noticed by adding MCMB in Mn-oxide coatings. The 300 o C heat-treated hybrid Mn-oxide coating with a Mn/MCMB ratio of 10/1 exhibits the highest value of 350 F/g, showing a ∼ 170% increase in specific capacitance.

Application of optimal estimation techniques to FFTF decay heat removal analysis

International Nuclear Information System (INIS)

Nutt, W.T.; Additon, S.L.; Parziale, E.A.

1979-01-01

The verification and adjustment of plant models for decay heat removal analysis using a mix of engineering judgment and formal techniques from control theory are discussed. The formal techniques facilitate dealing with typical test data which are noisy, redundant and do not measure all of the plant model state variables directly. Two pretest examples are presented. 5 refs

Multi-technique investigation of the binary fraction of A-F type candidate hybrid variable stars discovered by Kepler

Science.gov (United States)

Lampens, P.; Frémat, Y.; Vermeylen, L.; Sódor, Á.; Skarka, M.; De Cat, P.; Bognár, Zs.; De Nutte, R.; Dumortier, L.; Escorza, A.; Oomen, G. M.; Van de Steene, G.; Kamath, D.; Laverick, M.; Samadi, A.; Triana, S.; Lehmann, H.

2018-02-01

Context. Hundreds of candidate hybrid pulsators of intermediate type A-F were revealed by recent space missions. Hybrid pulsators allow us to study the full stellar interiors, where both low-order p- and high-order g-modes are simultaneously excited. The true hybrid stars must be identified since other processes, related to stellar multiplicity or rotation, might explain the presence of (some) low frequencies observed in their periodograms. Aims: We measured the radial velocities of 50 candidate δ Scuti -γ Doradus hybrid stars from the Kepler mission with the Hermes and ACE spectrographs over a time span of months to years. We aim to derive the fraction of binary and multiple systems and to provide an independent and homogeneous determination of the atmospheric properties and v sin i for all targets. The long(er)-term objective is to identify the (probable) physical cause of the low frequencies. Methods: We computed one-dimensional cross-correlation functions (CCFs) in order to find the best set of parameters in terms of the number of components, spectral type(s), and v sin i for each target. Radial velocities were measured using spectrum synthesis and a two-dimensional cross-correlation technique in the case of double- and triple-lined systems. Fundamental parameters were determined by fitting (composite) synthetic spectra to the normalised median spectra corrected for the appropriate Doppler shifts. Results: We report on the analysis of 478 high-resolution Hermes and 41 ACE spectra of A/F-type candidate hybrid pulsators from the Kepler field. We determined their radial velocities, projected rotational velocities, and atmospheric properties and classified our targets based on the shape of the CCFs and the temporal behaviour of the radial velocities. We derived orbital solutions for seven new systems. Three preliminary long-period orbital solutions are confirmed by a photometric time-delay analysis. Finally, we determined a global multiplicity fraction of 27% in

Hybrid intravenous digital subtraction angiography of the carotid bifurcation

International Nuclear Information System (INIS)

Burbank, F.H.; Enzmann, D.; Keyes, G.S.; Brody, W.R.

1984-01-01

A hybrid digital subtraction angiography technique and noise-reduction algorithm were used to evaluate the carotid bifurcation. Temporal, hybrid, and reduced-noise hybrid images were obtained in right and left anterior oblique projections, and both single- and multiple-frame images were created with each method. The resulting images were graded on a scale of 1 to 5 by three experienced neuroradiologists. Temporal images were preferred over hybrid images. The percentage of nondiagnostic examinations, as agreed upon by two readers, was higher for temporal alone than temporal + hybrid. In addition, also by agreement between two readers, temporal + hybrid images significantly increased the number of bifurcations seen in two views (87%) compared to temporal subtraction alone

Formalizing Probabilistic Safety Claims

Science.gov (United States)

Herencia-Zapana, Heber; Hagen, George E.; Narkawicz, Anthony J.

2011-01-01

A safety claim for a system is a statement that the system, which is subject to hazardous conditions, satisfies a given set of properties. Following work by John Rushby and Bev Littlewood, this paper presents a mathematical framework that can be used to state and formally prove probabilistic safety claims. It also enables hazardous conditions, their uncertainties, and their interactions to be integrated into the safety claim. This framework provides a formal description of the probabilistic composition of an arbitrary number of hazardous conditions and their effects on system behavior. An example is given of a probabilistic safety claim for a conflict detection algorithm for aircraft in a 2D airspace. The motivation for developing this mathematical framework is that it can be used in an automated theorem prover to formally verify safety claims.

Hybrid LES – Review and assessment

Indian Academy of Sciences (India)

brief overview of these techniques and current developments in hybrid LES techniques .... Spalart et al (1997) and Speziale (1998) proposed a new method in which ... over Ahmed Car Reference model (Kapadia et al 2003) and for a flat plate at ..... Allmaras S R 1994 One equation turbulence model for aerodynamics flows.

Deterministic and stochastic approach for safety and reliability optimization of captive power plant maintenance scheduling using GA/SA-based hybrid techniques: A comparison of results

International Nuclear Information System (INIS)

Mohanta, Dusmanta Kumar; Sadhu, Pradip Kumar; Chakrabarti, R.

2007-01-01

This paper presents a comparison of results for optimization of captive power plant maintenance scheduling using genetic algorithm (GA) as well as hybrid GA/simulated annealing (SA) techniques. As utilities catered by captive power plants are very sensitive to power failure, therefore both deterministic and stochastic reliability objective functions have been considered to incorporate statutory safety regulations for maintenance of boilers, turbines and generators. The significant contribution of this paper is to incorporate stochastic feature of generating units and that of load using levelized risk method. Another significant contribution of this paper is to evaluate confidence interval for loss of load probability (LOLP) because some variations from optimum schedule are anticipated while executing maintenance schedules due to different real-life unforeseen exigencies. Such exigencies are incorporated in terms of near-optimum schedules obtained from hybrid GA/SA technique during the final stages of convergence. Case studies corroborate that same optimum schedules are obtained using GA and hybrid GA/SA for respective deterministic and stochastic formulations. The comparison of results in terms of interval of confidence for LOLP indicates that levelized risk method adequately incorporates the stochastic nature of power system as compared with levelized reserve method. Also the interval of confidence for LOLP denotes the possible risk in a quantified manner and it is of immense use from perspective of captive power plants intended for quality power

What is the difference in the hybrid imaging techniques - SPECT/CT and PET-CT and is there any advantage of their application?

International Nuclear Information System (INIS)

Kostadinova, I.

2012-01-01

The hybrid imaging methods - Single Photon Emission Tomography-Computer Tomography /SPECT-CT / and Positron Emission Tomography-Computer Tomography / PET-CT/ allow receiving of combined image of two different techniques. In such a way it is possible to superimpose detailed anatomical image of the multislice spiral computer tomography with specific and sensitive molecular images of the SPECT and PET in a single study, allowing utilization of the full possibilities of the both techniques. They have advantages and disadvantages, which basically stem from the differences in the used radiopharmaceuticals and their physical properties. In PET- CT - positron emitters are applied, most often 18F and 11C, while in SPECT-CT - single photon emitters, most often 99m Tc and 131 I. A disadvantage of PET is a high cost, which is produced in cyclotron and its logistics is complicated. The great advantage of PET is its better spatial resolution, compared to SPECT, because of the possibility for simultaneous detection of pared photons and better registration. These techniques, especially PET-CT are nowadays the most increasing imaging methods in the world in making diagnosis, staging and following the effect of treatment in patients with oncological, neurological, cardiological, orthopedic diseases and infections. Recently, they are applied for the purposes of radiotherapy planning on the basis of the metabolically active tumor. As a final result, compared to the conventional techniques - roentgenography, CT and MRI, it is possible in many cases to make an early and more precise diagnosis, saving patients' time and using most appropriate treatment. As a conclusion it is clear, that the hybrid imaging has future and its application will increase. (author)

Augmenting Reality and Formality of Informal and Non-Formal Settings to Enhance Blended Learning

Science.gov (United States)

Pérez-Sanagustin, Mar; Hernández-Leo, Davinia; Santos, Patricia; Kloos, Carlos Delgado; Blat, Josep

2014-01-01

Visits to museums and city tours have been part of higher and secondary education curriculum activities for many years. However these activities are typically considered "less formal" when compared to those carried out in the classroom, mainly because they take place in informal or non-formal settings. Augmented Reality (AR) technologies…

Superfield formalism

Indian Academy of Sciences (India)

dimensional superfields, is a clear signature of the presence of the (anti-)BRST invariance in the original. 4D theory. Keywords. Non-Abelian 1-form gauge theory; Dirac fields; (anti-)Becchi–Roucet–Stora–. Tyutin invariance; superfield formalism; ...

Hybrid diffusion-P3 equation in N-layered turbid media: steady-state domain.

Science.gov (United States)

Shi, Zhenzhi; Zhao, Huijuan; Xu, Kexin

2011-10-01

This paper discusses light propagation in N-layered turbid media. The hybrid diffusion-P3 equation is solved for an N-layered finite or infinite turbid medium in the steady-state domain for one point source using the extrapolated boundary condition. The Fourier transform formalism is applied to derive the analytical solutions of the fluence rate in Fourier space. Two inverse Fourier transform methods are developed to calculate the fluence rate in real space. In addition, the solutions of the hybrid diffusion-P3 equation are compared to the solutions of the diffusion equation and the Monte Carlo simulation. For the case of small absorption coefficients, the solutions of the N-layered diffusion equation and hybrid diffusion-P3 equation are almost equivalent and are in agreement with the Monte Carlo simulation. For the case of large absorption coefficients, the model of the hybrid diffusion-P3 equation is more precise than that of the diffusion equation. In conclusion, the model of the hybrid diffusion-P3 equation can replace the diffusion equation for modeling light propagation in the N-layered turbid media for a wide range of absorption coefficients.

Hybrid Disease Diagnosis Using Multiobjective Optimization with Evolutionary Parameter Optimization

Directory of Open Access Journals (Sweden)

MadhuSudana Rao Nalluri

2017-01-01

Full Text Available With the widespread adoption of e-Healthcare and telemedicine applications, accurate, intelligent disease diagnosis systems have been profoundly coveted. In recent years, numerous individual machine learning-based classifiers have been proposed and tested, and the fact that a single classifier cannot effectively classify and diagnose all diseases has been almost accorded with. This has seen a number of recent research attempts to arrive at a consensus using ensemble classification techniques. In this paper, a hybrid system is proposed to diagnose ailments using optimizing individual classifier parameters for two classifier techniques, namely, support vector machine (SVM and multilayer perceptron (MLP technique. We employ three recent evolutionary algorithms to optimize the parameters of the classifiers above, leading to six alternative hybrid disease diagnosis systems, also referred to as hybrid intelligent systems (HISs. Multiple objectives, namely, prediction accuracy, sensitivity, and specificity, have been considered to assess the efficacy of the proposed hybrid systems with existing ones. The proposed model is evaluated on 11 benchmark datasets, and the obtained results demonstrate that our proposed hybrid diagnosis systems perform better in terms of disease prediction accuracy, sensitivity, and specificity. Pertinent statistical tests were carried out to substantiate the efficacy of the obtained results.

Reverse-hybrid robotic mesorectal excision for rectal cancer.

Science.gov (United States)

Park, In Ja; You, Y Nancy; Schlette, Erika; Nguyen, Sa; Skibber, John M; Rodriguez-Bigas, Miguel A; Chang, George J

2012-02-01

The robotic system offers potential technical advantages over laparoscopy for total mesorectal excision with radical lymphadenectomy for rectal cancer. However, the requirement for fixed docking limits its utility when the working volume is large or patient repositioning is required. The purpose of this study was to evaluate short-term outcomes associated with a novel setup to perform total mesorectal excision and radical lymphadenectomy for rectal cancer by the use of a "reverse" hybrid robotic-laparoscopic approach. This is a prospective consecutive cohort observational study of patients who underwent robotic rectal cancer resection from January 2009 to March 2011. During the study period, a technique of reverse-hybrid robotic-laparoscopic rectal resection with radical lymphadenectomy was developed. This technique involves reversal of the operative sequence with lymphovascular and rectal dissection to precede proximal colonic mobilization. This technique evolved from a conventional-hybrid resection with laparoscopic vascular control, colonic mobilization, and robotic pelvic dissection. Perioperative and short-term oncologic outcomes were analyzed. Thirty patients underwent reverse-hybrid resection. Median tumor location was 5 cm (interquartile range 3-9) from the anal verge. Median BMI was 27.6 (interquartile range 25.0-32.1 kg/m). Twenty (66.7%) received neoadjuvant chemoradiation. There were no conversions. Median blood loss was 100 mL (interquartile range 75-200). Total operation time was a median 369 (interquartile range 306-410) minutes. Median docking time was 6 (interquartile range 5-8) minutes, and console time was 98 (interquartile range 88-140) minutes. Resection was R0 in all patients; no patients had an incomplete mesorectal resection. Six patients (20%) underwent extended lymph node dissection or en bloc resection. Reverse-hybrid robotic surgery for rectal cancer maximizes the therapeutic applicability of the robotic and conventional laparoscopic

MOOC & B-Learning: Students' Barriers and Satisfaction in Formal and Non-Formal Learning Environments

Science.gov (United States)

Gutiérrez-Santiuste, Elba; Gámiz-Sánchez, Vanesa-M.; Gutiérrez-Pérez, Jose

2015-01-01

The study presents a comparative analysis of two virtual learning formats: one non-formal through a Massive Open Online Course (MOOC) and the other formal through b-learning. We compare the communication barriers and the satisfaction perceived by the students (N = 249) by developing a qualitative analysis using semi-structured questionnaires and…

Use of molecular techniques in bioremediation.

Science.gov (United States)

Płaza, G; Ulfig, K; Hazen, T C; Brigmon, R L

2001-01-01

In a practical sense, biotechnology is concerned with the production of commercial products generated by biological processes. More formally, biotechnology may be defined as "the application of scientific and engineering principles to the processing of material by biological agents to provide goods and services" (Cantor, 2000). From a historical perspective, biotechnology dates back to the time when yeast was first used for beer or wine fermentation, and bacteria were used to make yogurt. In 1972, the birth of recombinant DNA technology moved biotechnology to new heights and led to the establishment of a new industry. Progress in biotechnology has been truly remarkable. Within four years of the discovery of recombinant DNA technology, genetically modified organisms (GMOs) were making human insulin, interferon, and human growth hormone. Now, recombinant DNA technology and its products--GMOs are widely used in environmental biotechnology (Glick and Pasternak, 1988; Cowan, 2000). Bioremediation is one of the most rapidly growing areas of environmental biotechnology. Use of bioremediation for environmental clean up is popular due to low costs and its public acceptability. Indeed, bioremediation stands to benefit greatly and advance even more rapidly with the adoption of molecular techniques developed originally for other areas of biotechnology. The 1990s was the decade of molecular microbial ecology (time of using molecular techniques in environmental biotechnology). Adoption of these molecular techniques made scientists realize that microbial populations in the natural environments are much more diverse than previously thought using traditional culture methods. Using molecular ecological methods, such as direct DNA isolation from environmental samples, denaturing gradient gel electrophoresis (DGGE), PCR methods, nucleic acid hybridization etc., we can now study microbial consortia relevant to pollutant degradation in the environment. These techniques promise to

40 years of formal methods

DEFF Research Database (Denmark)

Bjørner, Dines; Havelund, Klaus

2014-01-01

In this "40 years of formal methods" essay we shall first delineate, Sect. 1, what we mean by method, formal method, computer science, computing science, software engineering, and model-oriented and algebraic methods. Based on this, we shall characterize a spectrum from specification-oriented met...

Exotic hybrid mesons in hard electroproduction

CERN Document Server

Anikin, I V; Szymanowski, L; Teryaev, O V; Wallon, S

2005-01-01

We estimate the sizeable cross section for deep exclusive electroproduction of an exotic $J^{PC}=1^{-+}$ hybrid meson in the Bjorken regime. The production amplitude scales like the one for usual meson electroproduction, i.e. as $1/Q^2$. This is due to the non-vanishing leading twist distribution amplitude for the hybrid meson, which may be normalized thanks to its relation to the energy momentum tensor and to the QCD sum rules technique. The hard amplitude is considered up to next-to-leading order in $\\alpha_{S}$ and we explore the consequences of fixing the renormalization scale ambiguity through the BLM procedure. We study the particular case where the hybrid meson decays through a $\\pi\\eta $ meson pair. We discuss the $\\pi\\eta$ generalized distribution amplitude and then calculate the production amplitude for this process. We propose a forward-backward asymmetry in the production of $\\pi$ and $\\eta$ mesons as a signal for the hybrid meson production. We briefly comment on hybrid electroproduction at very ...

Active Trimming of Hybrid Integrated Circuits

OpenAIRE

Németh, P.; Krémer, P.

1984-01-01

One of the more important fields of the microelectronics industry is the manufacturing of hybrid integrated circuits.An important part of the manufacturing process is concerned with the trimming of the hybrid integratedl circuits. This article deals with the basic principles of active trimming and introduces a microprocessor controlled trimming machine. By comparing active trimming with passive techniques, it can be shown that the active system has some advantages. This article outlines these...

Hybrid fixation in the bilateral sagittal split osteotomy for lower jaw advancement

Directory of Open Access Journals (Sweden)

Felipe Ladeira Pereira

2010-02-01

Full Text Available Miniplate and screw fixation has been widely used in bilateral sagittal split osteotomy, but some issues remain unclear concerning its lack of rigidity when compared to Spiessl's bicortical technique. This paper demonstrates the hybrid fixation technique in a case report. A 34-year-old female patient underwent a double jaw surgery with counter-clockwise rotation of the mandible fixed using the hybrid fixation technique. The patient evolved well in the postoperative period and is still under follow up after 14 months, reporting satisfaction with the results and no significant deviation from the treatment plan up to now. No damage to tooth roots was done, maxillomandibular range of motion was within normality and regression of the inferior alveolar nerve paresthesia was observed bilaterally. The hybrid mandibular fixation is clearly visible in the panoramic and cephalometric control radiographs. It seems that the hybrid fixation can sum the advantages of both monocortical and bicortical techniques in lower jaw advancement, increasing fixation stability without significant damage to the mandibular articulation and the inferior alveolar nerve. A statistical investigation seems necessary to prove its efficacy.

Hybrid metric-Palatini stars

Science.gov (United States)

Danilǎ, Bogdan; Harko, Tiberiu; Lobo, Francisco S. N.; Mak, M. K.

2017-02-01

We consider the internal structure and the physical properties of specific classes of neutron, quark and Bose-Einstein condensate stars in the recently proposed hybrid metric-Palatini gravity theory, which is a combination of the metric and Palatini f (R ) formalisms. It turns out that the theory is very successful in accounting for the observed phenomenology, since it unifies local constraints at the Solar System level and the late-time cosmic acceleration, even if the scalar field is very light. In this paper, we derive the equilibrium equations for a spherically symmetric configuration (mass continuity and Tolman-Oppenheimer-Volkoff) in the framework of the scalar-tensor representation of the hybrid metric-Palatini theory, and we investigate their solutions numerically for different equations of state of neutron and quark matter, by adopting for the scalar field potential a Higgs-type form. It turns out that the scalar-tensor definition of the potential can be represented as an Clairaut differential equation, and provides an explicit form for f (R ) given by f (R )˜R +Λeff, where Λeff is an effective cosmological constant. Furthermore, stellar models, described by the stiff fluid, radiation-like, bag model and the Bose-Einstein condensate equations of state are explicitly constructed in both general relativity and hybrid metric-Palatini gravity, thus allowing an in-depth comparison between the predictions of these two gravitational theories. As a general result it turns out that for all the considered equations of state, hybrid gravity stars are more massive than their general relativistic counterparts. Furthermore, two classes of stellar models corresponding to two particular choices of the functional form of the scalar field (constant value, and logarithmic form, respectively) are also investigated. Interestingly enough, in the case of a constant scalar field the equation of state of the matter takes the form of the bag model equation of state describing

A Formalization of Linkage Analysis

DEFF Research Database (Denmark)

Ingolfsdottir, Anna; Christensen, A.I.; Hansen, Jens A.

In this report a formalization of genetic linkage analysis is introduced. Linkage analysis is a computationally hard biomathematical method, which purpose is to locate genes on the human genome. It is rooted in the new area of bioinformatics and no formalization of the method has previously been ...

Fusion of neural computing and PLS techniques for load estimation

Energy Technology Data Exchange (ETDEWEB)

Lu, M.; Xue, H.; Cheng, X. [Northwestern Polytechnical Univ., Xi' an (China); Zhang, W. [Xi' an Inst. of Post and Telecommunication, Xi' an (China)

2007-07-01

A method to predict the electric load of a power system in real time was presented. The method is based on neurocomputing and partial least squares (PLS). Short-term load forecasts for power systems are generally determined by conventional statistical methods and Computational Intelligence (CI) techniques such as neural computing. However, statistical modeling methods often require the input of questionable distributional assumptions, and neural computing is weak, particularly in determining topology. In order to overcome the problems associated with conventional techniques, the authors developed a CI hybrid model based on neural computation and PLS techniques. The theoretical foundation for the designed CI hybrid model was presented along with its application in a power system. The hybrid model is suitable for nonlinear modeling and latent structure extracting. It can automatically determine the optimal topology to maximize the generalization. The CI hybrid model provides faster convergence and better prediction results compared to the abductive networks model because it incorporates a load conversion technique as well as new transfer functions. In order to demonstrate the effectiveness of the hybrid model, load forecasting was performed on a data set obtained from the Puget Sound Power and Light Company. Compared with the abductive networks model, the CI hybrid model reduced the forecast error by 32.37 per cent on workday, and by an average of 27.18 per cent on the weekend. It was concluded that the CI hybrid model has a more powerful predictive ability. 7 refs., 1 tab., 3 figs.

hybrid modulation scheme fo rid modulation scheme fo dulation

African Journals Online (AJOL)

eobe

control technique is done through simulations and ex control technique .... HYBRID MODULATION SCHEME FOR CASCADED H-BRIDGE INVERTER CELLS. C. I. Odeh ..... and OR operations. Referring to ... MATLAB/SIMULINK environment.

The effect of a parasite hybridizer on the magnetic behavior of partially delocalized transition shell systems (abstract)

International Nuclear Information System (INIS)

Sanchez-Castro, C.; Cooper, B.R.; Bedell, K.S.

1991-01-01

We have investigated how the behavior of a transition shell atomic species (species A) with orbital magnetism, driven by hybridization-mediated interactions via a sea of band electrons, is modified by the addition of a second parasite hybridizer (species B). Our approach involves a two-stage procedure. First, we calculate the modification of the band electron sea by hybridization with B by using a slave boson formalism. Second, the modifications in the A-A interionic interactions driving the orbital magnetic ordering are calculated by applying a Schrieffer--Wolff transformation on the renormalized Anderson lattice hamiltonian obtained from the first stage. The new A-A interactions have a different radial dependence (range factor) which depends in a nonlinear way on the band-B hybridization strength: and the consequences of this change on the magnetic ordering are studied using a mean-field approximation. This enables us to model the reduction in the magnetic ordering caused by competing parasite hybridization, and the dependence of this reduction on the relative hybridization strengths of the two species

Fundamentals of the Pure Spinor Formalism

CERN Document Server

Hoogeveen, Joost

2010-01-01

This thesis presents recent developments within the pure spinor formalism, which has simplified amplitude computations in perturbative string theory, especially when spacetime fermions are involved. Firstly the worldsheet action of both the minimal and the non-minimal pure spinor formalism is derived from first principles, i.e. from an action with two dimensional diffeomorphism and Weyl invariance. Secondly the decoupling of unphysical states in the minimal pure spinor formalism is proved

Formal verification of automated teller machine systems using SPIN

Science.gov (United States)

Iqbal, Ikhwan Mohammad; Adzkiya, Dieky; Mukhlash, Imam

2017-08-01

Formal verification is a technique for ensuring the correctness of systems. This work focuses on verifying a model of the Automated Teller Machine (ATM) system against some specifications. We construct the model as a state transition diagram that is suitable for verification. The specifications are expressed as Linear Temporal Logic (LTL) formulas. We use Simple Promela Interpreter (SPIN) model checker to check whether the model satisfies the formula. This model checker accepts models written in Process Meta Language (PROMELA), and its specifications are specified in LTL formulas.

INNOVATION IN A HYBRID SYSTEM: THE EXAMPLE OF NEPAL

Directory of Open Access Journals (Sweden)

Lukas Heckendorn Urscheler

2012-09-01

Full Text Available The Nepali legal tradition is a legal hybrid in many regards. Nepal was not colonised by a Western state, and the Hindu legal tradition therefore dominated all areas of law until the middle of the 20th century. Since the 1950s there has been a strong influence of Indian common law. It is probably for this reason that comparative classifications that include Nepal see the legal system as a mixture of common law and customary law. However, other mixtures mark the Nepali legal tradition. French law inspired the ruler in the 19th century, and that influence can still be found in the formal law. In addition, the plurality of Nepalese society made it necessary to provide space for different customary regimes to coexist with the formal Hindu law. When it comes to innovations within the legal system, including international law, the different ingredients interact.In family-related matters, the case-law of the Nepali Supreme Court illustrates the confrontation between international legal standards and the traditional rules. The Supreme Court has referred to the culturally conditioned discrimination against women and called for a thorough (political analysis in order to eliminate discrimination without a radical change of culture. In the area of discrimination against homo- and transsexuals the Supreme Court took a more innovative approach. It remains to be seen, however, if such a change is effective beyond the courtroom. In the area of private financial compensation for wrongs, the formal (written Nepali law does not have a general concept of tort. Compensation is generally integrated within the ambit of criminal law. Field research indicates that it would be possible to resort to existing customary principles of compensation rather than to the relatively complex common law of torts favoured by some Nepali scholars. However, this approach might not be without difficulty, as it might imply admitting the “superiority” of the customary practices of

Hybrid multiple criteria decision-making methods

DEFF Research Database (Denmark)

Zavadskas, Edmundas Kazimieras; Govindan, K.; Antucheviciene, Jurgita

2016-01-01

Formal decision-making methods can be used to help improve the overall sustainability of industries and organisations. Recently, there has been a great proliferation of works aggregating sustainability criteria by using diverse multiple criteria decision-making (MCDM) techniques. A number of revi...

Data Placement for Privacy-Aware Applications over Big Data in Hybrid Clouds

Directory of Open Access Journals (Sweden)

Xiaolong Xu

2017-01-01

Full Text Available Nowadays, a large number of groups choose to deploy their applications to cloud platforms, especially for the big data era. Currently, the hybrid cloud is one of the most popular computing paradigms for holding the privacy-aware applications driven by the requirements of privacy protection and cost saving. However, it is still a challenge to realize data placement considering both the energy consumption in private cloud and the cost for renting the public cloud services. In view of this challenge, a cost and energy aware data placement method, named CEDP, for privacy-aware applications over big data in hybrid cloud is proposed. Technically, formalized analysis of cost, access time, and energy consumption is conducted in the hybrid cloud environment. Then a corresponding data placement method is designed to accomplish the cost saving for renting the public cloud services and energy savings for task execution within the private cloud platforms. Experimental evaluations validate the efficiency and effectiveness of our proposed method.

Major difference in visible-light photocatalytic features between perfect and self-defective Ta3N5 materials: A screened coulomb hybrid dft investigation

KAUST Repository

Harb, Moussab; Cavallo, Luigi; Basset, Jean-Marie

2014-01-01

theory (DFT, including the perturbation theory DFPT) within the screened coulomb hybrid (HSE06) exchange-correlation formalism. Among the various explored self-defective structures, a strong stabilization is obtained for the configuration displaying a

A Formal Methods Approach to the Analysis of Mode Confusion

Science.gov (United States)

Butler, Ricky W.; Miller, Steven P.; Potts, James N.; Carreno, Victor A.

2004-01-01

The goal of the new NASA Aviation Safety Program (AvSP) is to reduce the civil aviation fatal accident rate by 80% in ten years and 90% in twenty years. This program is being driven by the accident data with a focus on the most recent history. Pilot error is the most commonly cited cause for fatal accidents (up to 70%) and obviously must be given major consideration in this program. While the greatest source of pilot error is the loss of situation awareness , mode confusion is increasingly becoming a major contributor as well. The January 30, 1995 issue of Aviation Week lists 184 incidents and accidents involving mode awareness including the Bangalore A320 crash 2/14/90, the Strasbourg A320 crash 1/20/92, the Mulhouse-Habsheim A320 crash 6/26/88, and the Toulouse A330 crash 6/30/94. These incidents and accidents reveal that pilots sometimes become confused about what the cockpit automation is doing. Consequently, human factors research is an obvious investment area. However, even a cursory look at the accident data reveals that the mode confusion problem is much deeper than just training deficiencies and a lack of human-oriented design. This is readily acknowledged by human factors experts. It seems that further progress in human factors must come through a deeper scrutiny of the internals of the automation. It is in this arena that formal methods can contribute. Formal methods refers to the use of techniques from logic and discrete mathematics in the specification, design, and verification of computer systems, both hardware and software. The fundamental goal of formal methods is to capture requirements, designs and implementations in a mathematically based model that can be analyzed in a rigorous manner. Research in formal methods is aimed at automating this analysis as much as possible. By capturing the internal behavior of a flight deck in a rigorous and detailed formal model, the dark corners of a design can be analyzed. This paper will explore how formal

Gene expression disruptions of organism versus organ in Drosophila species hybrids.

Directory of Open Access Journals (Sweden)

Daniel J Catron

2008-08-01

Full Text Available Hybrid dysfunctions, such as sterility, may result in part from disruptions in the regulation of gene expression. Studies of hybrids within the Drosophila simulans clade have reported genes expressed above or below the expression observed in their parent species, and such misexpression is associated with male sterility in multigenerational backcross hybrids. However, these studies often examined whole bodies rather than testes or had limited replication using less-sensitive but global techniques. Here, we use a new RNA isolation technique to re-examine hybrid gene expression disruptions in both testes and whole bodies from single Drosophila males by real-time quantitative RT-PCR. We find two early-spermatogenesis transcripts are underexpressed in hybrid whole-bodies but not in assays of testes alone, while two late-spermatogenesis transcripts seem to be underexpressed in both whole-bodies and testes alone. Although the number of transcripts surveyed is limited, these results provide some support for a previous hypothesis that the spermatogenesis pathway in these sterile hybrids may be disrupted sometime after the expression of the early meiotic arrest genes.

A novel hybrid model for air quality index forecasting based on two-phase decomposition technique and modified extreme learning machine.

Science.gov (United States)

Wang, Deyun; Wei, Shuai; Luo, Hongyuan; Yue, Chenqiang; Grunder, Olivier

2017-02-15

The randomness, non-stationarity and irregularity of air quality index (AQI) series bring the difficulty of AQI forecasting. To enhance forecast accuracy, a novel hybrid forecasting model combining two-phase decomposition technique and extreme learning machine (ELM) optimized by differential evolution (DE) algorithm is developed for AQI forecasting in this paper. In phase I, the complementary ensemble empirical mode decomposition (CEEMD) is utilized to decompose the AQI series into a set of intrinsic mode functions (IMFs) with different frequencies; in phase II, in order to further handle the high frequency IMFs which will increase the forecast difficulty, variational mode decomposition (VMD) is employed to decompose the high frequency IMFs into a number of variational modes (VMs). Then, the ELM model optimized by DE algorithm is applied to forecast all the IMFs and VMs. Finally, the forecast value of each high frequency IMF is obtained through adding up the forecast results of all corresponding VMs, and the forecast series of AQI is obtained by aggregating the forecast results of all IMFs. To verify and validate the proposed model, two daily AQI series from July 1, 2014 to June 30, 2016 collected from Beijing and Shanghai located in China are taken as the test cases to conduct the empirical study. The experimental results show that the proposed hybrid model based on two-phase decomposition technique is remarkably superior to all other considered models for its higher forecast accuracy. Copyright © 2016 Elsevier B.V. All rights reserved.

ADAPTING HYBRID MACHINE TRANSLATION TECHNIQUES FOR CROSS-LANGUAGE TEXT RETRIEVAL SYSTEM

Directory of Open Access Journals (Sweden)

P. ISWARYA

2017-03-01

Full Text Available This research work aims in developing Tamil to English Cross - language text retrieval system using hybrid machine translation approach. The hybrid machine translation system is a combination of rule based and statistical based approaches. In an existing word by word translation system there are lot of issues and some of them are ambiguity, Out-of-Vocabulary words, word inflections, and improper sentence structure. To handle these issues, proposed architecture is designed in such a way that, it contains Improved Part-of-Speech tagger, machine learning based morphological analyser, collocation based word sense disambiguation procedure, semantic dictionary, and tense markers with gerund ending rules, and two pass transliteration algorithm. From the experimental results it is clear that the proposed Tamil Query based translation system achieves significantly better translation quality over existing system, and reaches 95.88% of monolingual performance.

Leibniz' First Formalization of Syllogistics

DEFF Research Database (Denmark)

Robering, Klaus

2014-01-01

of letters just those which belong to the useful, i.e., valid, modes. The set of codes of valid modes turns out to be a so-called "regular" language (in the sense of formal-language-theory). Leibniz' formalization of syllogistics in his Dissertatio thus contains an estimation of the computational complexity...

Breaking Dense Structures: Proving Stability of Densely Structured Hybrid Systems

Directory of Open Access Journals (Sweden)

Eike Möhlmann

2015-06-01

Full Text Available Abstraction and refinement is widely used in software development. Such techniques are valuable since they allow to handle even more complex systems. One key point is the ability to decompose a large system into subsystems, analyze those subsystems and deduce properties of the larger system. As cyber-physical systems tend to become more and more complex, such techniques become more appealing. In 2009, Oehlerking and Theel presented a (de-composition technique for hybrid systems. This technique is graph-based and constructs a Lyapunov function for hybrid systems having a complex discrete state space. The technique consists of (1 decomposing the underlying graph of the hybrid system into subgraphs, (2 computing multiple local Lyapunov functions for the subgraphs, and finally (3 composing the local Lyapunov functions into a piecewise Lyapunov function. A Lyapunov function can serve multiple purposes, e.g., it certifies stability or termination of a system or allows to construct invariant sets, which in turn may be used to certify safety and security. In this paper, we propose an improvement to the decomposing technique, which relaxes the graph structure before applying the decomposition technique. Our relaxation significantly reduces the connectivity of the graph by exploiting super-dense switching. The relaxation makes the decomposition technique more efficient on one hand and on the other allows to decompose a wider range of graph structures.

Hybrid options for treating cardiac disease.

Science.gov (United States)

Umakanthan, Ramanan; Leacche, Marzia; Zhao, David X; Gallion, Anna H; Mishra, Prabodh C; Byrne, John G

2011-01-01

The options for treating heart disease have greatly expanded during the course of the last 2 1/2 decades with the advent of hybrid technology. The hybrid option for treating cardiac disease implies using the technology of both interventional cardiology and cardiac surgery to treat cardiac disease. This rapidly developing technology has given rise to new and creative techniques to treat cardiac disease involving coronary artery disease, coronary artery disease and cardiac valve disease, and atrial fibrillation. It has also led to the establishment of new procedural suites called hybrid operating rooms that facilitate the integration of technologies of interventional cardiology catheterization laboratories with those of cardiac surgery operating rooms. The development of hybrid options for treating cardiac disease has also greatly augmented teamwork and collaboration between interventional cardiologists and cardiac surgeons. Copyright © 2011 Elsevier Inc. All rights reserved.

Formal Specification and Verification of Fully Asynchronous Implementations of the Data Encryption Standard

Directory of Open Access Journals (Sweden)

Wendelin Serwe

2015-11-01

Full Text Available This paper presents two formal models of the Data Encryption Standard (DES, a first using the international standard LOTOS, and a second using the more recent process calculus LNT. Both models encode the DES in the style of asynchronous circuits, i.e., the data-flow blocks of the DES algorithm are represented by processes communicating via rendezvous. To ensure correctness of the models, several techniques have been applied, including model checking, equivalence checking, and comparing the results produced by a prototype automatically generated from the formal model with those of existing implementations of the DES. The complete code of the models is provided as appendices and also available on the website of the CADP verification toolbox.

A survey of formal languages for contracts

DEFF Research Database (Denmark)

Hvitved, Tom

2010-01-01

In this short paper we present the current status on formal languages and models for contracts. By a formal model is meant an unambiguous and rigorous representation of contracts, in order to enable their automatic validation, execution, and analysis — activates that are collectively referred...... to as contract lifecycle management (CLM). We present a set of formalism requirements, which represent features that any ideal contract model should support, based on which we present a comparative survey of existing contract formalisms....

Formalization of treatment guidelines using Fuzzy Cognitive Maps and semantic web tools.

Science.gov (United States)

Papageorgiou, Elpiniki I; Roo, Jos De; Huszka, Csaba; Colaert, Dirk

2012-02-01

Therapy decision making and support in medicine deals with uncertainty and needs to take into account the patient's clinical parameters, the context of illness and the medical knowledge of the physician and guidelines to recommend a treatment therapy. This research study is focused on the formalization of medical knowledge using a cognitive process, called Fuzzy Cognitive Maps (FCMs) and semantic web approach. The FCM technique is capable of dealing with situations including uncertain descriptions using similar procedure such as human reasoning does. Thus, it was selected for the case of modeling and knowledge integration of clinical practice guidelines. The semantic web tools were established to implement the FCM approach. The knowledge base was constructed from the clinical guidelines as the form of if-then fuzzy rules. These fuzzy rules were transferred to FCM modeling technique and, through the semantic web tools, the whole formalization was accomplished. The problem of urinary tract infection (UTI) in adult community was examined for the proposed approach. Forty-seven clinical concepts and eight therapy concepts were identified for the antibiotic treatment therapy problem of UTIs. A preliminary pilot-evaluation study with 55 patient cases showed interesting findings; 91% of the antibiotic treatments proposed by the implemented approach were in fully agreement with the guidelines and physicians' opinions. The results have shown that the suggested approach formalizes medical knowledge efficiently and gives a front-end decision on antibiotics' suggestion for cystitis. Concluding, modeling medical knowledge/therapeutic guidelines using cognitive methods and web semantic tools is both reliable and useful. Copyright © 2011 Elsevier Inc. All rights reserved.

20 CFR 702.336 - Formal hearings; new issues.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Formal hearings; new issues. 702.336 Section... Procedures Formal Hearings § 702.336 Formal hearings; new issues. (a) If, during the course of the formal hearing, the evidence presented warrants consideration of an issue or issues not previously considered...

Swarm Intelligence for Optimizing Hybridized Smoothing Filter in Image Edge Enhancement

Science.gov (United States)

Rao, B. Tirumala; Dehuri, S.; Dileep, M.; Vindhya, A.

In this modern era, image transmission and processing plays a major role. It would be impossible to retrieve information from satellite and medical images without the help of image processing techniques. Edge enhancement is an image processing step that enhances the edge contrast of an image or video in an attempt to improve its acutance. Edges are the representations of the discontinuities of image intensity functions. For processing these discontinuities in an image, a good edge enhancement technique is essential. The proposed work uses a new idea for edge enhancement using hybridized smoothening filters and we introduce a promising technique of obtaining best hybrid filter using swarm algorithms (Artificial Bee Colony (ABC), Particle Swarm Optimization (PSO) and Ant Colony Optimization (ACO)) to search for an optimal sequence of filters from among a set of rather simple, representative image processing filters. This paper deals with the analysis of the swarm intelligence techniques through the combination of hybrid filters generated by these algorithms for image edge enhancement.

The Interrelatedness of Formal, Non-Formal and Informal Learning: Evidence from Labour Market Program Participants

Science.gov (United States)

Cameron, Roslyn; Harrison, Jennifer L.

2012-01-01

Definitions, differences and relationships between formal, non-formal and informal learning have long been contentious. There has been a significant change in language and reference from adult education to what amounts to forms of learning categorised by their modes of facilitation. Nonetheless, there is currently a renewed interest in the…

Digital Resource Developments for Mathematics Education Involving Homework across Formal, Non-Formal and Informal Settings

Science.gov (United States)

Radovic, Slaviša; Passey, Don

2016-01-01

The aim of this paper is to explore further an under-developed area--how drivers of curriculum, pedagogy and assessment conceptions and practices shape the creation and uses of technologically based resources to support mathematics learning across informal, non-formal and formal learning environments. The paper considers: the importance of…

NON-FORMAL EDUCATION, OVEREDUCATION AND WAGES

OpenAIRE

SANDRA NIETO; RAÚL RAMOS

2013-01-01

Why do overeducated workers participate in non-formal education activities? Do not they suffer from an excess of education? Using microdata from the Spanish sample of the 2007 Adult Education Survey, we have found that overeducated workers participate more than the rest in non-formal education and that they earn higher wages than overeducated workers who did not participate. This result can be interpreted as evidence that non-formal education allows overeducated workers to acquire new abiliti...

Hybrid Laminates for Application in North Conditions

Science.gov (United States)

Antipov, V. V.; Oreshko, E. I.; Erasov, V. S.; Serebrennikova, N. Yu.

2016-11-01

A hybrid aluminum-lithium alloy/SIAL laminate as a possible material for application in structures operated in North conditions is considered. The finite-element method is used for a buckling stability analysis of hybrid panels, bars, and plates. A technique allowing one to compare the buckling stability of multilayered hybrid plates is offered. Compression tests were run on a hybrid laminate wing panel as a prototype of the top panel of TU-204SM airplane made from a high-strength B95T2 aluminum alloy. It turned out that the lighter composite panel had a higher load-carrying capacity than the aluminum one. Results of investigation into the properties the hybrid aluminum-lithium alloy/SIAL laminate and an analysis of scientific-technical data on this subject showed that this composite material could be used in the elements of airframes, including those operated in north conditions.

Carboxylated nitrile butadiene rubber/hybrid filler composites

Directory of Open Access Journals (Sweden)

Ahmad Mousa

2012-08-01

Full Text Available The surface properties of the OSW and NLS are measured with the dynamic contact-angle technique. The x-ray photoelectron spectroscopy (XPS of the OSW reveals that the OSW possesses various reactive functional groups namely hydroxyl groups (OH. Hybrid filler from NLS and OSW were incorporated into carboxylated nitrile rubber (XNBR to produce XNBR hybrid composites. The reaction of OH groups from the OSW with COOH of the XNBR is checked by attenuated total reflectance spectra (ATR-IR of the composites. The degree of curing ΔM (maximum torque-minimum torque as a function of hybrid filler as derived from moving die rheometer (MDR is reported. The stress-strain behavior of the hybrid composites as well as the dynamic mechanical thermal analysis (DMTA is studied. Bonding quality and dispersion of the hybrid filler with and in XNBR are examined using scanning-transmission electron microscopy (STEM in SEM.

Hybrid simulation of electrode plasmas in high-power diodes

International Nuclear Information System (INIS)

Welch, Dale R.; Rose, David V.; Bruner, Nichelle; Clark, Robert E.; Oliver, Bryan V.; Hahn, Kelly D.; Johnston, Mark D.

2009-01-01

New numerical techniques for simulating the formation and evolution of cathode and anode plasmas have been successfully implemented in a hybrid code. The dynamics of expanding electrode plasmas has long been recognized as a limiting factor in the impedance lifetimes of high-power vacuum diodes and magnetically insulated transmission lines. Realistic modeling of such plasmas is being pursued to aid in understanding the operating characteristics of these devices as well as establishing scaling relations for reliable extrapolation to higher voltages. Here, in addition to kinetic and fluid modeling, a hybrid particle-in-cell technique is described that models high density, thermal plasmas as an inertial fluid which transitions to kinetic electron or ion macroparticles above a prescribed energy. The hybrid technique is computationally efficient and does not require resolution of the Debye length. These techniques are first tested on a simple planar diode then applied to the evolution of both cathode and anode plasmas in a high-power self-magnetic pinch diode. The impact of an intense electron flux on the anode surface leads to rapid heating of contaminant material and diode impedance loss.

Formal semantic specifications as implementation blueprints for real-time programming languages

Science.gov (United States)

Feyock, S.

1981-01-01

Formal definitions of language and system semantics provide highly desirable checks on the correctness of implementations of programming languages and their runtime support systems. If these definitions can give concrete guidance to the implementor, major increases in implementation accuracy and decreases in implementation effort can be achieved. It is shown that of the wide variety of available methods the Hgraph (hypergraph) definitional technique (Pratt, 1975), is best suited to serve as such an implementation blueprint. A discussion and example of the Hgraph technique is presented, as well as an overview of the growing body of implementation experience of real-time languages based on Hgraph semantic definitions.

Layer-splitting technique for testing the recursive scheme for multilayer shields gamma ray buildup factors

International Nuclear Information System (INIS)

Alkhatib, Sari F.; Park, Chang Je; Jeong, Hae Yong; Lee, Yongdeok

2016-01-01

Highlights: • A simple formalism is suggested for the recursive approach and then it is used to produce buildup factors for certain multilayer shields. • The newly layer-splitting technique is implemented on the studied cases for testing the suggested formalism performance. • The buildup factors are generated using cubic polynomial fitting functions that are produced based on previous well-acknowledge data. - Abstract: This study illustrates the implementation of the newly suggested layer-splitting testing technique. This technique is introduced in order to be implemented in examining suggested formalisms for the recursive scheme (or iterative scheme). The recursive scheme is a concept used in treating and producing the gamma ray buildup factors in the case of multilayer shields. The layer-splitting technique simply enforces the scheme to treat a single layer of one material as two separated layers with similar characteristics. Thus it subjects the scheme to an abnormal definition of the multilayer shield that will test its performance in treating the successive layers. Thus, it will act as a method of verification for the approximations and assumptions taken in consideration. A simple formalism was suggested for the recursive scheme then the splitting technique was implemented on it. The results of implementing both the suggested formalism and the splitting technique are then illustrated and discussed. Throughout this study, cubic polynomial fitting functions were used to generate the data of buildup factors for the basic single-media that constitute the multilayer shields understudy. This study is limited to the cases of multiple shields consisting of repeated consecutive thin layers of lead–water and iron–water shields for 1 MeV gamma rays. The produced results of the buildup factor values through the implementation of the suggested formalism showed good consistency with the Monte Carlo simulation results of Lin and Jiang work. In the implementation of

Minimum deltaV Burn Planning for the International Space Station Using a Hybrid Optimization Technique, Level 1

Science.gov (United States)

Brown, Aaron J.

2015-01-01

The International Space Station's (ISS) trajectory is coordinated and executed by the Trajectory Operations and Planning (TOPO) group at NASA's Johnson Space Center. TOPO group personnel routinely generate look-ahead trajectories for the ISS that incorporate translation burns needed to maintain its orbit over the next three to twelve months. The burns are modeled as in-plane, horizontal burns, and must meet operational trajectory constraints imposed by both NASA and the Russian Space Agency. In generating these trajectories, TOPO personnel must determine the number of burns to model, each burn's Time of Ignition (TIG), and magnitude (i.e. deltaV) that meet these constraints. The current process for targeting these burns is manually intensive, and does not take advantage of more modern techniques that can reduce the workload needed to find feasible burn solutions, i.e. solutions that simply meet the constraints, or provide optimal burn solutions that minimize the total DeltaV while simultaneously meeting the constraints. A two-level, hybrid optimization technique is proposed to find both feasible and globally optimal burn solutions for ISS trajectory planning. For optimal solutions, the technique breaks the optimization problem into two distinct sub-problems, one for choosing the optimal number of burns and each burn's optimal TIG, and the other for computing the minimum total deltaV burn solution that satisfies the trajectory constraints. Each of the two aforementioned levels uses a different optimization algorithm to solve one of the sub-problems, giving rise to a hybrid technique. Level 2, or the outer level, uses a genetic algorithm to select the number of burns and each burn's TIG. Level 1, or the inner level, uses the burn TIGs from Level 2 in a sequential quadratic programming (SQP) algorithm to compute a minimum total deltaV burn solution subject to the trajectory constraints. The total deltaV from Level 1 is then used as a fitness function by the genetic

40 CFR 35.938-4 - Formal advertising.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Formal advertising. 35.938-4 Section 35... advertising. Each contract shall be awarded after formal advertising, unless negotiation is permitted in accordance with § 35.936-18. Formal advertising shall be in accordance with the following: (a) Adequate...

Comparison performance of split plug-in hybrid electric vehicle and hybrid electric vehicle using ADVISOR

Directory of Open Access Journals (Sweden)

Mohd Rashid Muhammad Ikram

2017-01-01

Full Text Available Electric vehicle suffers from relatively short range and long charging times and consequently has not become an acceptable solution to the automotive consumer. The addition of an internal combustion engine to extend the range of the electric vehicle is one method of exploiting the high efficiency and lack of emissions of the electric vehicle while retaining the range and convenient refuelling times of a conventional gasoline powered vehicle. The term that describes this type of vehicle is a hybrid electric vehicle. Many configurations of hybrid electric vehicles have been designed and implemented, namely the series, parallel and power-split configurations. This paper discusses the comparison between Split Plug-in Hybrid Electric Vehicle(SPHEV and Hybrid Electric Vehicle(HEV. Modelling methods such as physics-based Resistive Companion Form technique and Bond Graph method are presented with powertrain component and system modelling examples. The modelling and simulation capability of existing tools such as ADvanced VehIcle SimulatOR (ADVISOR is demonstrated through application examples. Since power electronics is indispensable in hybrid vehicles, the issue of numerical oscillations in dynamic simulations involving power electronics is briefly addressed.

Hybrid governance of aquaculture: Opportunities and challenges.

Science.gov (United States)

Vince, Joanna; Haward, Marcus

2017-10-01

The development of third party assessment and certification of fisheries and aquaculture has provided new forms of governance in sectors that were traditionally dominated by state based regulation. Emerging market based approaches are driven by shareholder expectations as well as commitment to corporate social responsibility, whereas community engagement is increasingly centered on the questions of social license to operate. Third party assessment and certification links state, market and community into an interesting and challenging hybrid form of governance. While civil society organizations have long been active in pursuing sustainable and safe seafood production, the development of formal non-state based certification provides both opportunities and challenges, and opens up interesting debates over hybrid forms of governance. This paper explores these developments in coastal marine resources management, focusing on aquaculture and the development and operation of the Aquaculture Stewardship Council. It examines the case of salmonid aquaculture in Tasmania, Australia, now Australia's most valuable seafood industry, which remains the focus of considerable community debate over its siting, operation and environmental impact. Copyright © 2017 Elsevier Ltd. All rights reserved.

Hybrid Theory of P-Wave Electron-Hydrogen Elastic Scattering

Science.gov (United States)

Bhatia, Anand

2012-01-01

We report on a study of electron-hydrogen scattering, using a combination of a modified method of polarized orbitals and the optical potential formalism. The calculation is restricted to P waves in the elastic region, where the correlation functions are of Hylleraas type. It is found that the phase shifts are not significantly affected by the modification of the target function by a method similar to the method of polarized orbitals and they are close to the phase shifts calculated earlier by Bhatia. This indicates that the correlation function is general enough to include the target distortion (polarization) in the presence of the incident electron. The important fact is that in the present calculation, to obtain similar results only 35-term correlation function is needed in the wave function compared to the 220-term wave function required in the above-mentioned previous calculation. Results for the phase shifts, obtained in the present hybrid formalism, are rigorous lower bounds to the exact phase shifts.

Preparation and Characterization of Hybrid Nanocomposite of Polyacrylamide/Silica-Nanoparticles

Directory of Open Access Journals (Sweden)

Ahmad Rabiee

2013-01-01

Full Text Available Polyacrylamides are water soluble macromolecules. These polymers are widely used for flocculation, separation and treatment of solid-liquid phase materials. In this research, organic-inorganic hybrid of polyacrylamide/silica nanoparticle is prepared via radical polymerization. First, the silica nanoparticle surfaces were modified by 3-methacryloxypropyltrimethoxysilane as coupling agent using a sol-gel technique in aqueous media in acidic condition. Afterwards, the modified nanoparticles are copolymerized by acrylamide monomer in presence of a peroxide initiator during a free radical polymerization. The chemical structure of the prepared modified nano-silica as well as polyacrylamide nanocomposite was studied and confirmed by FTIR spectroscopy technique. The morphology of nanocomposite was investigated by scanning electron microscopy. The SEM micrograph showed that the surface of the composite did not display any phase separation. Nanoparticles distribution was investigated by SEM-EDX technique. The results showed a uniform distribution of particles throughout the polymer bulk. TEM analysis showed the presence of silica nanoparticles in bulk of polymer which is an indicative of suitable dispersion of nanoparticles. The thermal stability of hybrid nanocomosite with that of polyacrylamide was compared by TGA technique. The higher thermal stability of hybrid nanocomposite with respect to homopolymer is indicative of a reaction between the modified nanoparticles and polyacrylamide chain. The presence of silica particles in copolymer was also confirmed with EDX analysis in ash content of hybrid nanocomposite.

Seniority in projection operator formalism

International Nuclear Information System (INIS)

Ullah, N.

1976-01-01

It is shown that the concept of seniority can be introduced in projection operator formalism through the use of the operator Q, which has been defined by de-Shalit and Talmi. The usefulness of seniority concept in projection operator formalism is discussed. An example of four nucleons in j=3/2 configuration is given for illustrative purposes

A Mathematical Formalization Proposal for Business Growth

Directory of Open Access Journals (Sweden)

Gheorghe BAILESTEANU

2013-01-01

Full Text Available Economic sciences have known a spectacular evolution in the last century; beginning to use axiomatic methods, applying mathematical instruments as a decision-making tool. The quest to formalization needs to be addressed from various different angles, reducing entry and operating formal costs, increasing the incentives for firms to operate formally, reducing obstacles to their growth, and searching for inexpensive approaches through which to enforce compliancy with government regulations. This paper proposes a formalized approach to business growth, based on mathematics and logics, taking into consideration the particularities of the economic sector.

What Determines Firms’ Decisions to Formalize?

OpenAIRE

Neil McCulloch; Günther G. Schulze; Janina Voss

2010-01-01

In this paper we analyze the decision of small and micro firms to formalize, i.e. to obtain business and other licenses in rural Indonesia. We use the rural investment climate survey (RICS) that consists of non-farm rural enterprises, most of them microenterprises, and analyze the effect of formalization on tax payments, corruption, access to credit and revenue, taking into account the endogeneity of the formalization decision to such benefits and costs. We show, contrary to most of the liter...

Lifelong Learning to Empowerment: Beyond Formal Education

Science.gov (United States)

Carr, Alexis; Balasubramanian, K.; Atieno, Rosemary; Onyango, James

2018-01-01

This paper discusses the relevance of lifelong learning vis-à-vis the Sustainable Development Goals (SDGs) and stresses the need for an approach blending formal education, non-formal and informal learning. The role of Open and Distance Learning (ODL) in moving beyond formal education and the importance of integrating pedagogy, andragogy and…

Hybrid hydrogels produced by ionizing radiation technique

International Nuclear Information System (INIS)

Oliveira, M.J.A.; Amato, V.S.; Lugão, A.B.; Parra, D.F.

2012-01-01

The interest in biocompatible hydrogels with particular properties has increased considerably in recent years due to their versatile applications in biomedicine, biotechnology, pharmacy, agriculture and controlled release of drugs. The use of hydrogels matrices for particular drug-release applications has been investigated with the synthesis of modified polymeric hydrogel of PVAl and 0.5, 1.0, 1.5% nano-clay. They were processed using gamma radiation from Cobalt-60 source at 25 kGy dose. The characterization of the hydrogels was conducted and toxicity was evaluated. The dried hydrogel was analyzed for thermogravimetry analysis (TGA), infrared spectroscopy (FTIR) and swelling in solutions of different pH. The membranes have no toxicity. The nano-clay influences directly the equilibrium swelling. - Highlights: ► Chemical interaction is observed when nanoclay is irradiated in PVAl hybrid hydrogels. ► Osmotic pressure within network promotes the rehydration capacity of the membranes. ► This effect is an important characteristic for hydrogels drug delivery systems.

A Hybrid Technique for Medical Image Segmentation

Directory of Open Access Journals (Sweden)

Alamgir Nyma

2012-01-01

Full Text Available Medical image segmentation is an essential and challenging aspect in computer-aided diagnosis and also in pattern recognition research. This paper proposes a hybrid method for magnetic resonance (MR image segmentation. We first remove impulsive noise inherent in MR images by utilizing a vector median filter. Subsequently, Otsu thresholding is used as an initial coarse segmentation method that finds the homogeneous regions of the input image. Finally, an enhanced suppressed fuzzy c-means is used to partition brain MR images into multiple segments, which employs an optimal suppression factor for the perfect clustering in the given data set. To evaluate the robustness of the proposed approach in noisy environment, we add different types of noise and different amount of noise to T1-weighted brain MR images. Experimental results show that the proposed algorithm outperforms other FCM based algorithms in terms of segmentation accuracy for both noise-free and noise-inserted MR images.

Development of a hybrid earthquake early warning system based on single sensor technique

International Nuclear Information System (INIS)

Gravirov, V.V.; Kislov, K.V.

2012-01-01

There are two methods to earthquake early warning system: the method based on a network of seismic stations and the single-sensor method. Both have advantages and drawbacks. The current systems rely on high density seismic networks. Attempts at implementing techniques based on the single-station principle encounter difficulties in the identification of earthquake in noise. The noise may be very diverse, from stationary to impulsive. It seems a promising line of research to develop hybrid warning systems with single-sensors being incorporated in the overall early warning network. This will permit using all advantages and will help reduce the radius of the hazardous zone where no earthquake warning can be produced. The main problems are highlighted and the solutions of these are discussed. The system is implemented to include three detection processes in parallel. The first is based on the study of the co-occurrence matrix of the signal wavelet transform. The second consists in using the method of a change point in a random process and signal detection in a moving time window. The third uses artificial neural networks. Further, applying a decision rule out the final earthquake detection is carried out and estimate its reliability. (author)

New hybrid conjugate gradient methods with the generalized Wolfe line search.

Science.gov (United States)

Xu, Xiao; Kong, Fan-Yu

2016-01-01

The conjugate gradient method was an efficient technique for solving the unconstrained optimization problem. In this paper, we made a linear combination with parameters β k of the DY method and the HS method, and putted forward the hybrid method of DY and HS. We also proposed the hybrid of FR and PRP by the same mean. Additionally, to present the two hybrid methods, we promoted the Wolfe line search respectively to compute the step size α k of the two hybrid methods. With the new Wolfe line search, the two hybrid methods had descent property and global convergence property of the two hybrid methods that can also be proved.

Formal Symplectic Groupoid of a Deformation Quantization

Science.gov (United States)

Karabegov, Alexander V.

2005-08-01

We give a self-contained algebraic description of a formal symplectic groupoid over a Poisson manifold M. To each natural star product on M we then associate a canonical formal symplectic groupoid over M. Finally, we construct a unique formal symplectic groupoid ‘with separation of variables’ over an arbitrary Kähler-Poisson manifold.

Special Issue: New trends and applications on hybrid artificial intelligence systems

OpenAIRE

Corchado Rodríguez, Emilio; Graña Romay, Manuel; Woźniak, MichaŁ

2017-01-01

This Special Issue is an outgrowth of the HAIS'10, the 5th International Conference on Hybrid Artificial Intelligence Systems, which was held in San Sebastián, Spain, 23–25 June 2010. The HAIS conference series is devoted to the presentation of innovative techniques involving the hybridization of emerging and active topics in data mining and decision support systems, information fusion, evolutionary computation, visualization techniques, ensemble models, intelligent agent-based systems (compl...

multiPDEVS: A Parallel Multicomponent System Specification Formalism

Directory of Open Access Journals (Sweden)

Damien Foures

2018-01-01

Full Text Available Based on multiDEVS formalism, we introduce multiPDEVS, a parallel and nonmodular formalism for discrete event system specification. This formalism provides combined advantages of PDEVS and multiDEVS approaches, such as excellent simulation capabilities for simultaneously scheduled events and components able to influence each other using exclusively their state transitions. We next show the soundness of the formalism by giving a construction showing that any multiPDEVS model is equivalent to a PDEVS atomic model. We then present the simulation procedure associated, usually called abstract simulator. As a well-adapted formalism to express cellular automata, we finally propose to compare an implementation of multiPDEVS formalism with a more classical Cell-DEVS implementation through a fire spread application.

Load estimator-based hybrid controller design for two-interleaved boost converter dedicated to renewable energy and automotive applications.

Science.gov (United States)

Bougrine, Mohamed; Benmiloud, Mohammed; Benalia, Atallah; Delaleau, Emmanuel; Benbouzid, Mohamed

2017-01-01

This paper is devoted to the development of a hybrid controller for a two-interleaved boost converter dedicated to renewable energy and automotive applications. The control requirements, resumed in fast transient and low input current ripple, are formulated as a problem of fast stabilization of a predefined optimal limit cycle, and solved using hybrid automaton formalism. In addition, a real time estimation of the load is developed using an algebraic approach for online adjustment of the hybrid controller. Mathematical proofs are provided with simulations to illustrate the effectiveness and the robustness of the proposed controller despite different disturbances. Furthermore, a fuel cell system supplying a resistive load through a two-interleaved boost converter is also highlighted. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

The role of formal specifications

International Nuclear Information System (INIS)

McHugh, J.

1994-01-01

The role of formal requirements specification is discussed under the premise that the primary purpose of such specifications is to facilitate clear and unambiguous communications among the communities of interest for a given project. An example is presented in which the failure to reach such an understanding resulted in an accident at a chemical plant. Following the example, specification languages based on logical formalisms and notations are considered. These are rejected as failing to serve the communications needs of diverse communities. The notion of a specification as a surrogate for a program is also considered and rejected. The paper ends with a discussion of the type of formal notation that will serve the communications role and several encouraging developments are noted

Bridging In-school and Out-of-school Learning: Formal, Non-Formal, and Informal Education

Science.gov (United States)

Eshach, Haim

2007-04-01

The present paper thoroughly examines how one can effectively bridge in-school and out-of-school learning. The first part discusses the difficulty in defining out-of-school learning. It proposes to distinguish three types of learning: formal, informal, and non-formal. The second part raises the question of whether out-of-school learning should be dealt with in the in-school system, in view of the fact that we experience informal learning anyway as well as considering the disadvantages and difficulties teachers are confronted with when planning and carrying out scientific fieldtrips. The voices of the teachers, the students, and the non-formal institution staff are heard to provide insights into the problem. The third part discusses the cognitive and affective aspects of non-formal learning. The fourth part presents some models explaining scientific fieldtrip learning and based on those models, suggests a novel explanation. The fifth part offers some recommendations of how to bridge in and out-of-school learning. The paper closes with some practical ideas as to how one can bring the theory described in the paper into practice. It is hoped that this paper will provide educators with an insight so that they will be able to fully exploit the great potential that scientific field trips may offer.

Breeding of lilies and tulips—Interspecific hybridization and genetic background—

Science.gov (United States)

Marasek-Ciolakowska, Agnieszka; Nishikawa, Tomotaro; Shea, Daniel J.; Okazaki, Keiichi

2018-01-01

Lilies and tulips (Liliaceae family) are economically very important ornamental bulbous plants. Here, we summarize major breeding goals, the role of an integrated method of cut-style pollination and fertilization followed by embryo rescue and mitotic and meiotic polyploidization involved in new assortment development. Both crops have been subjected to extensive interspecific hybridization followed by selection. Additionally, spontaneous polyploidization has played a role in their evolution. In lilies, there is a tendency to replace diploids with polyploid cultivars, whereas in tulip a majority of the cultivars that exist today are still diploid except for triploid Darwin hybrid tulips. The introduction of molecular cytogenetic techniques such as genomic in situ hybridization (GISH) permitted the detailed studies of genome composition in lily and tulip interspecific hybrids and to follow the chromosome inheritance in interspecific crosses. In addition, this review presents the latest information on phylogenetic relationship in lily and tulip and recent developments in molecular mapping using different DNA molecular techniques. PMID:29681746

A hybrid online scheduling mechanism with revision and progressive techniques for autonomous Earth observation satellite

Science.gov (United States)

Li, Guoliang; Xing, Lining; Chen, Yingwu

2017-11-01

The autonomicity of self-scheduling on Earth observation satellite and the increasing scale of satellite network attract much attention from researchers in the last decades. In reality, the limited onboard computational resource presents challenge for the online scheduling algorithm. This study considered online scheduling problem for a single autonomous Earth observation satellite within satellite network environment. It especially addressed that the urgent tasks arrive stochastically during the scheduling horizon. We described the problem and proposed a hybrid online scheduling mechanism with revision and progressive techniques to solve this problem. The mechanism includes two decision policies, a when-to-schedule policy combining periodic scheduling and critical cumulative number-based event-driven rescheduling, and a how-to-schedule policy combining progressive and revision approaches to accommodate two categories of task: normal tasks and urgent tasks. Thus, we developed two heuristic (re)scheduling algorithms and compared them with other generally used techniques. Computational experiments indicated that the into-scheduling percentage of urgent tasks in the proposed mechanism is much higher than that in periodic scheduling mechanism, and the specific performance is highly dependent on some mechanism-relevant and task-relevant factors. For the online scheduling, the modified weighted shortest imaging time first and dynamic profit system benefit heuristics outperformed the others on total profit and the percentage of successfully scheduled urgent tasks.

Toward a formal ontology for narrative

Directory of Open Access Journals (Sweden)

Ciotti, Fabio

2016-03-01

Full Text Available In this paper the rationale and the first draft of a formal ontology for modeling narrative texts are presented. Building on the semiotic and structuralist narratology, and on the work carried out in the late 1980s by Giuseppe Gigliozzi in Italy, the focus of my research are the concepts of character and of narrative world/space. This formal model is expressed in the OWL 2 ontology language. The main reason to adopt a formal modeling approach is that I consider the purely probabilistic-quantitative methods (now widespread in digital literary studies inadequate. An ontology, on one hand provides a tool for the analysis of strictly literary texts. On the other hand (though beyond the scope of the present work, its formalization can also represent a significant contribution towards grounding the application of storytelling methods outside of scholarly contexts.

Industrial Practice in Formal Methods : A Review

DEFF Research Database (Denmark)

Bicarregui, Juan C.; Fitzgerald, John; Larsen, Peter Gorm

2009-01-01

We examine the the industrial application of formal methods using data gathered in a review of 62 projects taking place over the last 25 years. The review suggests that formal methods are being applied in a wide range of application domains, with increasingly strong tool support. Significant chal...... challenges remain in providing usable tools that can be integrated into established development processes; in education and training; in taking formal methods from first use to second use, and in gathering and evidence to support informed selection of methods and tools.......We examine the the industrial application of formal methods using data gathered in a review of 62 projects taking place over the last 25 years. The review suggests that formal methods are being applied in a wide range of application domains, with increasingly strong tool support. Significant...

What Sensing Tells Us: Towards a Formal Theory of Testing for Dynamical Systems

Science.gov (United States)

McIlraith, Sheila; Scherl, Richard

2005-01-01

Just as actions can have indirect effects on the state of the world, so too can sensing actions have indirect effects on an agent's state of knowledge. In this paper, we investigate "what sensing actions tell us", i.e., what an agent comes to know indirectly from the outcome of a sensing action, given knowledge of its actions and state constraints that hold in the world. To this end, we propose a formalization of the notion of testing within a dialect of the situation calculus that includes knowledge and sensing actions. Realizing this formalization requires addressing the ramification problem for sensing actions. We formalize simple tests as sensing actions. Complex tests are expressed in the logic programming language Golog. We examine what it means to perform a test, and how the outcome of a test affects an agent's state of knowledge. Finally, we propose automated reasoning techniques for test generation and complex-test verification, under certain restrictions. The work presented in this paper is relevant to a number of application domains including diagnostic problem solving, natural language understanding, plan recognition, and active vision.

Hybrid vapor phase-solution phase growth techniques for improved CZT(S,Se) photovoltaic device performance

Energy Technology Data Exchange (ETDEWEB)

Chang, Liang-Yi; Gershon, Talia S.; Haight, Richard A.; Lee, Yun Seog

2016-12-27

A hybrid vapor phase-solution phase CZT(S,Se) growth technique is provided. In one aspect, a method of forming a kesterite absorber material on a substrate includes the steps of: depositing a layer of a first kesterite material on the substrate using a vapor phase deposition process, wherein the first kesterite material includes Cu, Zn, Sn, and at least one of S and Se; annealing the first kesterite material to crystallize the first kesterite material; and depositing a layer of a second kesterite material on a side of the first kesterite material opposite the substrate using a solution phase deposition process, wherein the second kesterite material includes Cu, Zn, Sn, and at least one of S and Se, wherein the first kesterite material and the second kesterite material form a multi-layer stack of the absorber material on the substrate. A photovoltaic device and method of formation thereof are also provided.

Hybrid Testing of Composite Structures with Single-Axis Control

DEFF Research Database (Denmark)

Waldbjørn, Jacob Paamand; Høgh, Jacob Herold; Stang, Henrik

2013-01-01

Correlation (DIC) is therefore implemented for displacement control of the experimental setup. The hybrid testing setup was verified on a multicomponent structure consisting of a beam loaded in three point bending and a numerical structure of a frame. Furthermore, the stability of the hybrid testing loop......Hybrid testing is a substructuring technique where a structure is emulated by modelling a part of it in a numerical model while testing the remainder experimentally. Previous research in hybrid testing has been performed on multi-component structures e.g. damping fixtures, however in this paper...... a hybrid testing platform is introduced for single-component hybrid testing. In this case, the boundary between the numerical model and experimental setup is defined by multiple Degrees-Of-Freedoms (DOFs) which highly complicate the transferring of response between the two substructures. Digital Image...

On hybrid cooperation in underlay cognitive radio networks

KAUST Repository

Mahmood, Nurul Huda

2012-11-01

In wireless systems where transmitters are subject to a strict received power constraint, such as in underlay cognitive radio networks, cooperative communication is a promising strategy to enhance network performance, as it helps to improve the coverage area and outage performance of a network. However, this comes at the expense of increased resource utilization. To balance the performance gain against the possible over-utilization of resources, we propose a hybrid-cooperation technique for underlay cognitive radio networks, where secondary users cooperate only when required. Various performance measures of the proposed hybrid-cooperation technique are analyzed in this paper, and are also further validated numerically. © 2012 IEEE.

Formal verification - Robust and efficient code: Introduction to Formal Verification

CERN Multimedia

CERN. Geneva

2016-01-01

In general, FV means "proving that certain properties hold for a given system using formal mathematics". This definition can certainly feel daunting, however, as we will learn, we can reap benefits from the paradigm without digging too deep into ...

Hard electroproduction of hybrid mesons

International Nuclear Information System (INIS)

Anikin, I.V.; LPT Universite Paris-Sud, Orsay; Szymanowski, L.; Teryaev, O.V.; ); Wallon, S.

2005-01-01

We estimate the sizeable cross section for deep exclusive electroproduction of an exotic J PC = 1 -+ hybrid meson in the Bjorken regime. The production amplitude scales like the one for usual meson electroproduction, i.e. as 1/Q 2 . This is due to the non-vanishing leading twist distribution amplitude for the hybrid meson, which may be normalized thanks to its relation to the energy momentum tensor and to the QCD sum rules technique. The hard amplitude is considered up to next-to-leading order in as and we explore the consequences of fixing the renormalization scale ambiguity through the BLM procedure. (author)

Formalization of the Resolution Calculus for First-Order Logic

DEFF Research Database (Denmark)

Schlichtkrull, Anders

2016-01-01

A formalization in Isabelle/HOL of the resolution calculus for first-order logic is presented. Its soundness and completeness are formally proven using the substitution lemma, semantic trees, Herbrand’s theorem, and the lifting lemma. In contrast to previous formalizations of resolution, it consi......A formalization in Isabelle/HOL of the resolution calculus for first-order logic is presented. Its soundness and completeness are formally proven using the substitution lemma, semantic trees, Herbrand’s theorem, and the lifting lemma. In contrast to previous formalizations of resolution...

Hybrid appendectomy with classic trocar on McBurney's point.

Science.gov (United States)

Gunes, Mehmet Emin; Ersoz, Feyzullah; Duzkoylu, Yigit; Arikan, Soykan; Cakir, Coskun; Nayci, Ali Emre

2018-03-01

Appendectomy is still the most commonly performed intra-abdominal operation worldwide. Interestingly, it has not reached the same popularity as other laparoscopic surgical procedures. Although multiple techniques have been described, a standard approach has not been described for the laparoscopic technique yet. To perform hybrid appendectomy for acute appendicitis on McBurney's point, aiming to perform an easier and quicker procedure while limiting the trauma to the abdominal wall by obtaining the advantages of both laparoscopic and open techniques. We retrospectively evaluated the results of 24 patients on whom we had performed hybrid appendectomy with an optical trocar on McBurney's point for acute appendicitis in 1 year in terms of demographics, operative time, complications, hospital stay and cosmetic results. Twenty-one of the patients underwent hybrid appendectomy with a one-optic trocar on McBurney's point. The mean operative time was 21.4 ±6.2 min. We did not encounter any postoperative complications in any of the patients. The median hospital stay was 1.2 ±1.0 days. The postoperative scar was minimal. This technique is defined in the literature for the first time, and it is easy and feasible for the surgeons. It may reduce the operative time and costs when compared to the conventional laparoscopic technique, but prospective studies with more patients are needed for more certain results.

USING OF NON-CONVENTIONAL FUELS IN HYBRID VEHICLE DRIVES

Directory of Open Access Journals (Sweden)

Dalibor Barta

2016-12-01

Full Text Available Electric or hybrid vehicles are becoming increasingly common on roads. While electric vehicles are still more or less intended for city traffic, hybrid vehicles allow normal use due to wider driving range. The use of internal combustion engines in hybrid drives is still an inspiration to find the way to reduce the produc-tion of emissions. Numbers of alternative energy resources were studied as a substitution of conventional fuels for hybrid vehicles drives worldwide. The paper deals with the possibility of using alternative fuels as CNG, LPG and LNG in combination with hybrid drive of a midibus with the capacity of 20 passengers. Various aspects and techniques of hybrid vehicles from energy management system, propulsion system and using of various alternative fuels are explored in this paper. Other related fields of hybrid vehicles such as changes of vehicle weight or influence of electric energy sources on the total vehicle emission production are also included.

A DNA microarray-based methylation-sensitive (MS)-AFLP hybridization method for genetic and epigenetic analyses.

Science.gov (United States)

Yamamoto, F; Yamamoto, M

2004-07-01

We previously developed a PCR-based DNA fingerprinting technique named the Methylation Sensitive (MS)-AFLP method, which permits comparative genome-wide scanning of methylation status with a manageable number of fingerprinting experiments. The technique uses the methylation sensitive restriction enzyme NotI in the context of the existing Amplified Fragment Length Polymorphism (AFLP) method. Here we report the successful conversion of this gel electrophoresis-based DNA fingerprinting technique into a DNA microarray hybridization technique (DNA Microarray MS-AFLP). By performing a total of 30 (15 x 2 reciprocal labeling) DNA Microarray MS-AFLP hybridization experiments on genomic DNA from two breast and three prostate cancer cell lines in all pairwise combinations, and Southern hybridization experiments using more than 100 different probes, we have demonstrated that the DNA Microarray MS-AFLP is a reliable method for genetic and epigenetic analyses. No statistically significant differences were observed in the number of differences between the breast-prostate hybridization experiments and the breast-breast or prostate-prostate comparisons.

Formalizing Evaluation in Music Information Retrieval

DEFF Research Database (Denmark)

Sturm, Bob L.

2013-01-01

We develop a formalism to disambiguate the evaluation of music information retrieval systems. We define a ``system,'' what it means to ``analyze'' one, and make clear the aims, parts, design, execution, interpretation, and assumptions of its ``evaluation.'' We apply this formalism to discuss...

A computational formalization for partial evaluation

DEFF Research Database (Denmark)

Hatcliff, John; Danvy, Olivier

1997-01-01

We formalize a partial evaluator for Eugenio Moggi's computational metalanguage. This formalization gives an evaluation-order independent view of binding-time analysis and program specialization, including a proper treatment of call unfolding. It also enables us to express the essence of `control...

Informal work and formal plans

DEFF Research Database (Denmark)

Dalsted, Rikke Juul; Hølge-Hazelton, Bibi; Kousgaard, Marius Brostrøm

2012-01-01

INTRODUCTION: Formal pathways models outline that patients should receive information in order to experience a coherent journey but do not describe an active role for patients or their relatives. The aim of this is paper is to articulate and discuss the active role of patients during their cancer...... trajectories. METHODS AND THEORY: An in-depth case study of patient trajectories at a Danish hospital and surrounding municipality using individual interviews with patients. Theory about trajectory and work by Strauss was included. RESULTS: Patients continuously took initiatives to organize their treatment....... The patients' requests were not sufficiently supported in the professional organisation of work or formal planning. Patients' insertion and use of information in their trajectories challenged professional views and working processes. And the design of the formal pathway models limits the patients' active...

Exotic hybrid mesons in hard electroproduction

International Nuclear Information System (INIS)

Anikin, I.V.; Pire, B.; Szymanowski, L.; Teryaev, O.V.; Wallon, S.

2005-01-01

We estimate the sizeable cross section for deep exclusive electroproduction of an exotic J PC =1 -+ hybrid meson in the Bjorken regime. The production amplitude scales like the one for usual meson electroproduction, i.e., as 1/Q 2 . This is due to the nonvanishing leading twist distribution amplitude for the hybrid meson, which may be normalized thanks to its relation to the energy-momentum tensor and to the QCD sum rules technique. The hard amplitude is considered up to next-to-leading order in α S and we explore the consequences of fixing the renormalization scale ambiguity through the Brodsky-Lepage-Mackenzie (BLM) procedure. We study the particular case where the hybrid meson decays through a πη meson pair. We discuss the πη generalized distribution amplitude and then calculate the production amplitude for this process. We propose a forward-backward asymmetry in the production of π and η mesons as a signal for the hybrid meson production. We briefly comment on hybrid electroproduction at very high energy, in the diffractive limit where a QCD Odderon exchange mechanism should dominate. The conclusion of our study is that hard electroproduction is a promising way to study exotic hybrid mesons, in particular, at JLAB, HERA (HERMES), or CERN (Compass)

Contribution of fluorescence in situ hybridization to biological dosimetry

International Nuclear Information System (INIS)

Sorokine-Durm, I.; Roy, L.; Durand, V.; Voisin, P.

1995-01-01

Fluorescence in situ hybridization with composite whole chromosome specific DNA probes for human chromosomes 2, 4 and 12 an α-satellite centromeric DNA probe labelled with biotin were used to measure symmetrical and terminal translocations (dose rate 0.5 Gy/min) and dicentrics (0.1 Gy/min) induced in vitro by 60 Co γ-irradiation (0-5 Gy). The suitability of fluorescence in situ hybridization (F.I.S.H.) technique for dicentrics detection is compared with the conventional technique. Dose-response curves for γ-rays ( 60 Co) for two dose rates are shown (dicentrics and translocations). (authors). 10 refs., 2 figs

Superconducting and hybrid systems for magnetic field shielding

International Nuclear Information System (INIS)

Gozzelino, L; Gerbaldo, R; Ghigo, G; Laviano, F; Truccato, M; Agostino, A

2016-01-01

In this paper we investigate and compare the shielding properties of superconducting and hybrid superconducting/ferromagnetic systems, consisting of cylindrical cups with an aspect ratio of height/radius close to unity. First, we reproduced, by finite-element calculations, the induction magnetic field values measured along the symmetry axis in a superconducting (MgB 2 ) and in a hybrid configuration (MgB 2 /Fe) as a function of the applied magnetic field and of the position. The calculations are carried out using the vector potential formalism, taking into account simultaneously the non-linear properties of both the superconducting and the ferromagnetic material. On the basis of the good agreement between the experimental and the computed data we apply the same model to study the influence of the geometric parameters of the ferromagnetic cup as well as of the thickness of the lateral gap between the two cups on the shielding properties of the superconducting cup. The results show that in the considered non-ideal geometry, where the edge effect in the flux penetration cannot be disregarded, the superconducting shield is always the most efficient solution at low magnetic fields. However, a partial recovery of the shielding capability of the hybrid configuration occurs if a mismatch in the open edges of the two cups is considered. In contrast, at high magnetic fields the hybrid configurations are always the most effective. In particular, the highest shielding factor was found for solutions with the ferromagnetic cup protruding over the superconducting one. (paper)

Potentiometric determination of the 'formal' hydrolysis ratio of aluminium species in aqueous solutions

International Nuclear Information System (INIS)

Fournier, Agathe C.; Shafran, Kirill L.; Perry, Carole C.

2008-01-01

The 'formal' hydrolysis ratio (h = C(OH - ) added /C(Al) total ) of hydrolysed aluminium-ions is an important parameter required for the exhaustive and quantitative speciation-fractionation of aluminium in aqueous solutions. This paper describes a potentiometric method for determination of the formal hydrolysis ratio based on an automated alkaline titration procedure. The method uses the point of precipitation of aluminium hydroxide as a reference (h = 3.0) in order to calculate the initial formal hydrolysis ratio of hydrolysed aluminium-ion solutions. Several solutions of pure hydrolytic species including aluminium monomers (AlCl 3 ), Al 13 polynuclear cluster ([Al 13 O 4 (OH) 24 (H 2 O) 12 ] 7+ ), Al 30 polynuclear cluster ([Al 30 O 8 (OH) 56 (H 2 O) 26 ] 18+ ) and a suspension of nanoparticulate aluminium hydroxide have been used as 'reference standards' to validate the proposed potentiometric method. Other important variables in the potentiometric determination of the hydrolysis ratio have also been optimised including the concentration of aluminium and the type and strength of alkali (Trizma-base, NH 3 , NaHCO 3 , Na 2 CO 3 and KOH). The results of the potentiometric analysis have been cross-verified by quantitative 27 Al solution nuclear magnetic resonance ( 27 Al NMR) measurements. The 'formal' hydrolysis ratio of a commercial basic aluminium chloride has been measured as an example of a practical application of the developed technique

37 CFR 251.41 - Formal hearings.

Science.gov (United States)

2010-07-01

... ARBITRATION ROYALTY PANEL RULES AND PROCEDURES COPYRIGHT ARBITRATION ROYALTY PANEL RULES OF PROCEDURE Procedures of Copyright Arbitration Royalty Panels § 251.41 Formal hearings. (a) The formal hearings that will be conducted under the rules of this subpart are rate adjustment hearings and royalty fee...

The closed time-path Green function formalism in many-body theory

International Nuclear Information System (INIS)

Guang-zhao Zhou; Zhao-bin Su; Bai-lin Hao; Lu Yu.

1983-09-01

The closed time-path Green function formalism, developed by our group during recent years, is briefly reviewed. The generating functional technique, the coupled equations for the order parameter and the elementary excitations as well as the systematic loop expansion are outlined. The applications to critical dynamics, quenched random systems, nonlinear response theory, superconductivity, laser system and quasi-one-dimensional conductors are described. The theoretical approach developed can be applied to both equilibrium and non-equilibrium many-body systems. (author)

Formal Analysis Of Use Case Diagrams

Directory of Open Access Journals (Sweden)

Radosław Klimek

2010-01-01

Full Text Available Use case diagrams play an important role in modeling with UML. Careful modeling is crucialin obtaining a correct and efficient system architecture. The paper refers to the formalanalysis of the use case diagrams. A formal model of use cases is proposed and its constructionfor typical relationships between use cases is described. Two methods of formal analysis andverification are presented. The first one based on a states’ exploration represents a modelchecking approach. The second one refers to the symbolic reasoning using formal methodsof temporal logic. Simple but representative example of the use case scenario verification isdiscussed.

A hybrid method for flood simulation in small catchments combining hydrodynamic and hydrological techniques

Science.gov (United States)

Bellos, Vasilis; Tsakiris, George

2016-09-01

The study presents a new hybrid method for the simulation of flood events in small catchments. It combines a physically-based two-dimensional hydrodynamic model and the hydrological unit hydrograph theory. Unit hydrographs are derived using the FLOW-R2D model which is based on the full form of two-dimensional Shallow Water Equations, solved by a modified McCormack numerical scheme. The method is tested at a small catchment in a suburb of Athens-Greece for a storm event which occurred in February 2013. The catchment is divided into three friction zones and unit hydrographs of 15 and 30 min are produced. The infiltration process is simulated by the empirical Kostiakov equation and the Green-Ampt model. The results from the implementation of the proposed hybrid method are compared with recorded data at the hydrometric station at the outlet of the catchment and the results derived from the fully hydrodynamic model FLOW-R2D. It is concluded that for the case studied, the proposed hybrid method produces results close to those of the fully hydrodynamic simulation at substantially shorter computational time. This finding, if further verified in a variety of case studies, can be useful in devising effective hybrid tools for the two-dimensional flood simulations, which are lead to accurate and considerably faster results than those achieved by the fully hydrodynamic simulations.

Enhanced Electric Power Transmission by Hybrid Compensation Technique

International Nuclear Information System (INIS)

Palanichamy, C; Kiu, G Q

2015-01-01

In today's competitive environment, new power system engineers are likely to contribute immediately to the task, without years of seasoning via on-the-job training, mentoring, and rotation assignments. At the same time it is becoming obligatory to train power system engineering graduates for an increasingly quality-minded corporate environment. In order to achieve this, there is a need to make available better-quality tools for educating and training power system engineering students and in-service system engineers too. As a result of the swift advances in computer hardware and software, many windows-based computer software packages were developed for the purpose of educating and training. In line with those packages, a simulation package called Hybrid Series-Shunt Compensators (HSSC) has been developed and presented in this paper for educational purposes. (paper)

A Correctness Verification Technique for Commercial FPGA Synthesis Tools

International Nuclear Information System (INIS)

Kim, Eui Sub; Yoo, Jun Beom; Choi, Jong Gyun; Kim, Jang Yeol; Lee, Jang Soo

2014-01-01

Once the FPGA (Filed-Programmable Gate Array) designers designs Verilog programs, the commercial synthesis tools automatically translate the Verilog programs into EDIF programs so that the designers can have largely focused on HDL designs for correctness of functionality. Nuclear regulation authorities, however, require more considerate demonstration of the correctness and safety of mechanical synthesis processes of FPGA synthesis tools, even if the FPGA industry have acknowledged them empirically as correct and safe processes and tools. In order to assure of the safety, the industry standards for the safety of electronic/electrical devices, such as IEC 61508 and IEC 60880, recommend using the formal verification technique. There are several formal verification tools (i.e., 'FormalPro' 'Conformal' 'Formality' and so on) to verify the correctness of translation from Verilog into EDIF programs, but it is too expensive to use and hard to apply them to the works of 3rd-party developers. This paper proposes a formal verification technique which can contribute to the correctness demonstration in part. It formally checks the behavioral equivalence between Verilog and subsequently synthesized Net list with the VIS verification system. A Net list is an intermediate output of FPGA synthesis process, and EDIF is used as a standard format of Net lists. If the formal verification succeeds, then we can assure that the synthesis process from Verilog into Net list worked correctly at least for the Verilog used. In order to support the formal verification, we developed the mechanical translator 'EDIFtoBLIFMV,' which translates EDIF into BLIF-MV as an input front-end of VIS system, while preserving their behavior equivalence.. We performed the case study with an example of a preliminary version of RPS in a Korean nuclear power plant in order to provide the efficiency of the proposed formal verification technique and implemented translator. It

A Correctness Verification Technique for Commercial FPGA Synthesis Tools

Energy Technology Data Exchange (ETDEWEB)

Kim, Eui Sub; Yoo, Jun Beom [Konkuk University, Seoul (Korea, Republic of); Choi, Jong Gyun; Kim, Jang Yeol; Lee, Jang Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-10-15

Once the FPGA (Filed-Programmable Gate Array) designers designs Verilog programs, the commercial synthesis tools automatically translate the Verilog programs into EDIF programs so that the designers can have largely focused on HDL designs for correctness of functionality. Nuclear regulation authorities, however, require more considerate demonstration of the correctness and safety of mechanical synthesis processes of FPGA synthesis tools, even if the FPGA industry have acknowledged them empirically as correct and safe processes and tools. In order to assure of the safety, the industry standards for the safety of electronic/electrical devices, such as IEC 61508 and IEC 60880, recommend using the formal verification technique. There are several formal verification tools (i.e., 'FormalPro' 'Conformal' 'Formality' and so on) to verify the correctness of translation from Verilog into EDIF programs, but it is too expensive to use and hard to apply them to the works of 3rd-party developers. This paper proposes a formal verification technique which can contribute to the correctness demonstration in part. It formally checks the behavioral equivalence between Verilog and subsequently synthesized Net list with the VIS verification system. A Net list is an intermediate output of FPGA synthesis process, and EDIF is used as a standard format of Net lists. If the formal verification succeeds, then we can assure that the synthesis process from Verilog into Net list worked correctly at least for the Verilog used. In order to support the formal verification, we developed the mechanical translator 'EDIFtoBLIFMV,' which translates EDIF into BLIF-MV as an input front-end of VIS system, while preserving their behavior equivalence.. We performed the case study with an example of a preliminary version of RPS in a Korean nuclear power plant in order to provide the efficiency of the proposed formal verification technique and implemented translator. It

The impact of applying product-modelling techniques in configurator projects

DEFF Research Database (Denmark)

Hvam, Lars; Kristjansdottir, Katrin; Shafiee, Sara

2018-01-01

This paper aims to increase understanding of the impact of using product-modelling techniques to structure and formalise knowledge in configurator projects. Companies that provide customised products increasingly apply configurators in support of sales and design activities, reaping benefits...... that include shorter lead times, improved quality of specifications and products, and lower overall product costs. The design and implementation of configurators are a challenging task that calls for scientifically based modelling techniques to support the formal representation of configurator knowledge. Even...... the phenomenon model and information model are considered visually, (2) non-UML-based modelling techniques, in which only the phenomenon model is considered and (3) non-formal modelling techniques. This study analyses the impact to companies from increased availability of product knowledge and improved control...

Novel brewing yeast hybrids: creation and application.

Science.gov (United States)

Krogerus, Kristoffer; Magalhães, Frederico; Vidgren, Virve; Gibson, Brian

2017-01-01

The natural interspecies Saccharomyces cerevisiae × Saccharomyces eubayanus hybrid yeast is responsible for global lager beer production and is one of the most important industrial microorganisms. Its success in the lager brewing environment is due to a combination of traits not commonly found in pure yeast species, principally low-temperature tolerance, and maltotriose utilization. Parental transgression is typical of hybrid organisms and has been exploited previously for, e.g., the production of wine yeast with beneficial properties. The parental strain S. eubayanus has only been discovered recently and newly created lager yeast strains have not yet been applied industrially. A number of reports attest to the feasibility of this approach and artificially created hybrids are likely to have a significant impact on the future of lager brewing. De novo S. cerevisiae × S. eubayanus hybrids outperform their parent strains in a number of respects, including, but not restricted to, fermentation rate, sugar utilization, stress tolerance, and aroma formation. Hybrid genome function and stability, as well as different techniques for generating hybrids and their relative merits are discussed. Hybridization not only offers the possibility of generating novel non-GM brewing yeast strains with unique properties, but is expected to aid in unraveling the complex evolutionary history of industrial lager yeast.

Design of a hybrid silicon-plasmonic co-propagating coupler operating close to coherent perfect absorption

Energy Technology Data Exchange (ETDEWEB)

Zanotto, Simone; Melloni, Andrea [Dipartimento di Elettronica, Informazione e Bioingegneria, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano (Italy)

2016-04-28

By hybrid integration of plasmonic and dielectric waveguide concepts, it is shown that nearly perfect coherent absorption can be achieved in a co-propagating coupler geometry. First, the operating principle of the proposed device is detailed in the context of a more general 2 × 2 lossy coupler formalism. Then, it is shown how to tune the device in a wide region of possible working points, its broadband operation, and the tolerance to fabrication uncertainties. Finally, a complete picture of the electromagnetic modes inside the hybrid structure is analyzed, shining light onto the potentials which the proposed device holds in view of classical and quantum signal processing, nonlinear optics, polarization control, and sensing.

Formal balancing of chemical reaction networks

NARCIS (Netherlands)