WorldWideScience

Sample records for hybrid magnetic conveyance

  1. Basic Characteristics of the Propulsion System in the Permanent Magnet-HTSC Hybrid Magnetic Conveyance System

    Science.gov (United States)

    Ohashi, Shunsuke; Kumano, Daiki; Goto, Yasuyuki

    The Hybrid magnetically levitated transportation system has been developed. The magnetic rail is set on the ground, and the carrier with permanent magnets and high-Tc superconductors (HTSC) levitates on the rail. Repulsive force of permanent magnet is introduced to support load weight. Pinning force of the HTSC is used to support weight of the frame of the carrier and to achieve lateral stability of the carrier. In this paper, propulsion system of the conveyance system is studied. Propulsion function is installed on the carrier body. Magnetic gradient is used to get propulsion force. Propulsion force of the system is little. So propulsion rail system is introduced. Air core copper coils are installed on the magnetic rail. Interaction between current of these coils and permanent magnets on the carrier generates propulsion force. Enough propulsion force is given. Influence of the propulsion system on the levitation and guidance system is measured. Stability of levitation and guidance system is enough even when propulsion system is operated.

  2. Levitation and Guidance Characteristics of the Permanent magnet-HTSC Hybrid Magnetic Conveyance System

    Science.gov (United States)

    Ohashi, Shunsuke; Dodo, Daiki

    Hybrid magnetically levitated transportation system has been developed. The magnetic rail is set on the ground, and the carrier with permanent magnets and high-Tc superconductors (HTSC) levitates on the rail. In this system, pinning force of HTSC and repulsive force of permanent magnet is combined. Repulsive force of permanent magnet is introduced to support weight. Pinning force is used to support weight of the frame of the carrier and to achieve lateral stability of the carrier. To decrease influence of weight on the levitation gap of the carrier, the weight stage is fixed to the carrier frame by linear sliders, and moves freely for vertical direction. As a result, there is little influence on levitation gap of the carrier. Basic levitation and guidance characteristics of the system are shown. Repulsive force generates very large levitation force. It also generates unstable lateral force. Weight added to the carrier has some influence on lateral stability. Although lateral position recovery force by pinning effect decreases at a heavier weight, the carrier shows enough force to keep lateral stability.

  3. Study on control method of running velocity for the permanent magnet-HTSC hybrid magnetically levitated conveyance system

    Energy Technology Data Exchange (ETDEWEB)

    Nishio, R.; Ikeda, M.; Sasaki, R. [Kansai University, 3-3-35 Yamate-cho, Suita, Osaka 564-8680 (Japan); Ohashi, S., E-mail: ohashi@kansai-u.ac.jp [Kansai University, 3-3-35 Yamate-cho, Suita, Osaka 564-8680 (Japan)

    2011-11-15

    The hybrid magnetically levitated carrying system is developed. Control method of running velocity of the carrier is studied. Running velocity is controlled by current of the propulsion coils. Propulsion characteristcs are improved. We have developed the magnetically levitated carrying system. In this system, pinning force of high temperature bulk super conductor (HTSC) is used for the levitation and guidance. Four HTSCs are installed on the carrier. The magnetic rail is set on the ground, and flux from the magnetic rail is pinned by HTSCs. To increase levitation force, repulsive force of the permanent magnet is used. The hybrid levitation system is composed. The permanent magnet is installed under the load stage of the carrier. Repulsive force by the permanent magnet between the load stage on the carrier and the magnetic rail on the ground is used to support the load weight. Levitation and guidance one by pinning effect of the YBaCuO HTSC in the carrier is used to levitate the carrier body. The load stage is separated from the carrier flame and can move freely for vertical direction levitation. For the propulsion system, electromagnet is installed on the surface of the magnetic rail. In this paper, control method of running velocity of the carrier is studied. Propulsion force is given as follows; Air core copper coils are installed on the magnetic rail. Interaction between current of these coils and permanent magnets on the carrier generates propulsion force. Running velocity is controlled by current of the propulsion coils. It is also changed by position of the carrier and the load weight. From the results, stability of the propulsion system is given, and propulsion characteristics are improved.

  4. Study on control method of running velocity for the permanent magnet-HTSC hybrid magnetically levitated conveyance system

    Science.gov (United States)

    Nishio, R.; Ikeda, M.; Sasaki, R.; Ohashi, S.

    2011-11-01

    We have developed the magnetically levitated carrying system. In this system, pinning force of high temperature bulk super conductor (HTSC) is used for the levitation and guidance. Four HTSCs are installed on the carrier. The magnetic rail is set on the ground, and flux from the magnetic rail is pinned by HTSCs. To increase levitation force, repulsive force of the permanent magnet is used. The hybrid levitation system is composed. The permanent magnet is installed under the load stage of the carrier. Repulsive force by the permanent magnet between the load stage on the carrier and the magnetic rail on the ground is used to support the load weight. Levitation and guidance one by pinning effect of the YBaCuO HTSC in the carrier is used to levitate the carrier body. The load stage is separated from the carrier flame and can move freely for vertical direction levitation. For the propulsion system, electromagnet is installed on the surface of the magnetic rail. In this paper, control method of running velocity of the carrier is studied. Propulsion force is given as follows; Air core copper coils are installed on the magnetic rail. Interaction between current of these coils and permanent magnets on the carrier generates propulsion force. Running velocity is controlled by current of the propulsion coils. It is also changed by position of the carrier and the load weight. From the results, stability of the propulsion system is given, and propulsion characteristics are improved.

  5. Interaction between propulsion and levitation system in the HTSC-permanent magnet conveyance system

    Science.gov (United States)

    Ohashi, S.; Nishio, R.; Hashikawa, T.

    2010-11-01

    The magnetically levitated conveyance system has been developed. Pinning force of high temperature bulk superconductors (HTSC) are used for the levitation and the guidance of the carrier. The magnetic rail is set on the ground, and flux from the magnetic rail is pinned by HTSCs on the carrier body. To increase the load weight, the repulsive force of the permanent magnet is introduced. The hybrid levitation system is composed. The repulsive force by the permanent magnet between the load stage on the carrier and the magnetic rail on the ground is used to support the load weight. As the load stage is connected to the carrier body by the linear sliders, the mass of the load weight does not act on the carrier body. The interaction between the electromagnet and the permanent magnet under the load stage generates the propulsion force. The electromagnet is constructed by the air core coils, and excited only when the load stage passes. The interaction between the propulsion and the levitation system is investigated. Disturbance of the propulsion system on the levitation and the guidance force is measured. The results show the influence of the propulsion electromagnet on the pinning force is little, and this propulsion system works effectively.

  6. Cryogenic Hybrid Magnetic Bearing

    Science.gov (United States)

    Meeks, Crawford R.; Dirusso, Eliseo; Brown, Gerald V.

    1994-01-01

    Cryogenic hybrid magnetic bearing is example of class of magnetic bearings in which permanent magnets and electromagnets used to suspend shafts. Electromagnets provide active control of position of shaft. Bearing operates at temperatures from -320 degrees F (-196 degrees C) to 650 degrees F (343 degrees C); designed for possible use in rocket-engine turbopumps, where effects of cryogenic environment and fluid severely limit lubrication of conventional ball bearings. This and similar bearings also suitable for terrestrial rotating machinery; for example, gas-turbine engines, high-vacuum pumps, canned pumps, precise gimbals that suspend sensors, and pumps that handle corrosive or gritty fluids.

  7. Hybrid Magnetics and Power Applications

    DEFF Research Database (Denmark)

    Mo, Wai Keung; Paasch, Kasper

    A hybrid magnetic approach, merging two different magnetic core properites such as ferrite and iron powder cores, is an effective solution for power converter applications. It can offer similar magnetic properties to that of magnetic powder cores but showing less copper loss than powder cores...

  8. Nonlocal vibration of Y-shaped CNT conveying nano-magnetic viscous fluid under magnetic field

    Directory of Open Access Journals (Sweden)

    A. Ghorbanpour Arani

    2015-06-01

    Full Text Available This study deals with the vibration and stability analysis of a Y-shaped single-walled carbon nanotube (SWCNT embedded in visco-Pasternak foundation and conveying nano-magnetic viscous fluid (NMF based on nonlocal elasticity theory and Euler–Bernoulli beam model. The fluid is two-phases due to the existence of magnetic nanoparticles which its volume fraction is much little in comparison with the base fluid where the influence of 2D magnetic field is taken into account. Also, Knudsen number is used to correct the velocity profile of fluid. The Galerkin method is applied to solve the equation of motion which is obtained by employing Hamilton’s principle. The detail parametric study is conducted, focusing on the combined effects of carbon nanotube and Y-shaped junction fitted at the downstream end, fluid velocity, Knudsen number and elastic medium. The results indicate that increasing the angle between centerline of the CNT and the downstream elbows decreases stability of system.

  9. Hybrid superconductor magnet bearings

    Science.gov (United States)

    Chu, Wei-Kan

    1995-01-01

    Hybrid superconductor magnet bearings (HSMB's) utilize high temperature superconductors (HTS's) together with permanent magnets to form a frictionless interface between relatively rotating parts. They are low mass, stable, and do not incur expenditure of energy during normal operation. There is no direct physical contact between rotor and stator, and hence there is no wear and tear. However, just as any other applications of HTS's, it requires a very cold temperature to function. Whereas this might be perceived as a disadvantage on earth, it is of no great concern in space or on the moon. To astronomers, the moon is an excellent site for an observatory, but the cold and dusty vacuum environment on the moon precludes the use of mechanical bearings on the telescope mounts. Furthermore, drive mechanisms with very fine steps, and hence bearings with extremely low friction are needed to track a star from the moon, because the moon rotates very slowly. All aspects considered, the HSMB is about the only candidate that fits in naturally. Here, we present a design for one such bearing, capable of supporting a telescope that weighs about 3 lbs on Earth.

  10. 32 tesla hybrid magnet system

    Energy Technology Data Exchange (ETDEWEB)

    Leupold, M.J.; Iwasa, Y.; Weggel, R.J. (MIT Cambridge (U.S.A.))

    1984-01-01

    The paper describes the design and construction of a hybrid magnet system to generate 32T with 9MW of electrical power. The system consist of an 11T niobium-titanium superconducting magnet, a 1.8K/4.2K cryostat, and a high-performance, water-cooled Bitter magnet, all of which are discussed in the paper.

  11. Hybrid Magnetics and Power Applications

    DEFF Research Database (Denmark)

    Mo, Wai Keung; Paasch, Kasper

    2017-01-01

    . In order to prevent ferrite core saturation, placing an effective air gap within the ferrite core is a key method to obtain optimum hybrid magnetic performance. Furthermore, a relatively large inductance at low loading current is an excellent way to minimze power loss in order to achieve high efficiency...

  12. A superconducting conveyer system using multiple bulk Y-Ba-Cu-O superconductors and permanent magnets

    Science.gov (United States)

    Kinoshita, T.; Koshizuka, N.; Nagashima, K.; Murakami, M.

    Developments of non-contact superconducting devices like superconducting magnetic levitation transfer and superconducting flywheel energy storage system have been performed based on the interactions between bulk Y-Ba-Cu-O superconductors and permanent magnets, in that the superconductors can stably be levitated without any active control. The performances of noncontact superconducting devices are dependent on the interaction forces like attractive forces and stiffness. In the present study, we constructed a non-contact conveyer for which the guide rails were prepared by attaching many Fe-Nd-B magnets onto an iron base plate. Along the translational direction, all the magnets were arranged as to face the same pole, and furthermore their inter-distance was made as small as possible. The guide rail has three magnet rows, for which the magnets were glued on the iron plate such that adjacent magnet rows have opposite poles like NSN. At the center row, the magnetic field at zero gap reached 0.61T, while the field strengths of two rows on the side edges were only 0.48T due to magnetic interactions among permanent magnets. We then prepared a cryogenic box made with FRP that can store several bulk Y-Ba-Cu-O superconductors 25 mm in diameter cooled by liquid nitrogen. It was found that the levitation forces and stiffness increased with increasing the number of bulk superconductors installed in the box, although the levitation force per unit bulk were almost the same. We also confirmed that these forces are dependent on the configuration of bulk superconductors.

  13. Magnetic Properties and Intergranular Action in Bonded Hybrid Magnets

    Institute of Scientific and Technical Information of China (English)

    Hua Zhenghe; Li Shandong; Han Zhida; Wang Dunhui; Zhong Wei; Gu Benxi; Lu Mu; Zhang Jianrong; Du Youwei

    2007-01-01

    Magnetic properties and intergranular action in bonded hybrid magnets, based on NdFeB and strontium ferrite powders were investigated. The long-range magnetostatic interaction and short-range exchange coupling interaction existed simultaneously in bonded hybrid magnets, and neither of them could be neglected. Some magnetic property parameters of hybrid magnets could be approximately obtained by adding the hysteresis loops of two magnets pro rata.

  14. Effects of magnetic-fluid flow on structural instability of a carbon nanotube conveying nanoflow under a longitudinal magnetic field

    Science.gov (United States)

    Sadeghi-Goughari, Moslem; Jeon, Soo; Kwon, Hyock-Ju

    2017-09-01

    In drug delivery systems, carbon nanotubes (CNTs) can be used to deliver anticancer drugs into target site to kill metastatic cancer cells under the magnetic field guidance. Deep understanding of dynamic behavior of CNTs in drug delivery systems may enable more efficient use of the drugs while reducing systemic side effects. In this paper, we study the effect of magnetic-fluid flow on the structural instability of a CNT conveying nanoflow under a longitudinal magnetic field. The Navier-Stokes equation of magnetic-fluid flow is coupled with Euler-Bernoulli beam theory for modeling fluid structure interaction (FSI). Size effects of the magnetic fluid and the CNT are addressed through small-scale parameters including the Knudsen number (Kn) and the nonlocal parameter. Results show the positive role of magnetic properties of fluid flow on the structural stability of CNT. Specifically, magnetic force applied to the fluid flow has an effect of decreasing the structural stiffness of system while increasing the critical flow velocity. Furthermore, we discover that the nanoscale effects of CNT and fluid flow tend to amplify the influence of magnetic field on the vibrational behavior of the system.

  15. Hybrid Shielding for Magnetic Fields

    Science.gov (United States)

    Mullins, David; Royal, Kevin

    2017-01-01

    Precision symmetry measurements such as the search for the electric dipole moment of the neutron require magnetic shielding rooms to reduce the ambient field to the pT scale. The massive mu-metal sheets and large separation between layers make these shield rooms bulky and expensive. Active field cancellation systems used to reduce the surrounding field are limited in uniformity of cancellation. A novel approach to reducing the space between shield layers and increasing the effectiveness of active cancellation is to combine the two systems into a hybrid system, with active and passive layers interspersed. We demonstrate this idea in a prototype with an active layer sandwiched between two passive layers of shielding.

  16. Vibrations of fluid-conveying inclined single-walled carbon nanotubes acted upon by a longitudinal magnetic field

    Science.gov (United States)

    Kiani, Keivan

    2016-12-01

    This work deals with the influence of the longitudinal magnetic field on vibrations of inclined single-walled carbon nanotubes (SWCNTs) subjected to an inside fluid flow. Using an equivalent continuum structure model for the SWCNT and a plug-like model for the moving inside fluid flow, the nonlocal longitudinal and transverse equations of motion of magnetically affected SWCNTs are obtained in the context of small deformations. By application of the assumed-mode methodology, the displacements are discretized in terms of vibration mode shapes, and by exploiting generalized Newmark-β scheme, their corresponding time-dependent parameters are determined at each time. In the presence of the longitudinal magnetic field, the effects of the small-scale parameter, fluid flow velocity, and inclination angle on both longitudinal and transverse vibrations of SWCNTs are addressed. The obtained results reveal that the longitudinal magnetic field has fairly no effect on the longitudinal dynamic behavior of the nanostructure. However, maximum values of both transverse displacement and nonlocal bending moment of the fluid-conveying SWCNT would reduce as the strength of the magnetic field grows. Such a fact becomes more highlighted for high levels of the fluid flow velocity. The obtained results indicate that the longitudinal magnetic field can be exploited as an efficient way to control transverse vibrations of SWCNTs conveying fluids.

  17. Measurement of the adhesion force between particles for high gradient magnetic separation of pneumatic conveyed powder products

    Energy Technology Data Exchange (ETDEWEB)

    Senkawa, K., E-mail: senkawa@qb.see.eng.osaka-u.ac.jp [Osaka University, A1 Bldg, 2-1 Yamadaoka, Suita, Osaka 565-0871 (Japan); Nakai, Y.; Mishima, F.; Akiyama, Y.; Nishijima, S. [Osaka University, A1 Bldg, 2-1 Yamadaoka, Suita, Osaka 565-0871 (Japan)

    2011-11-15

    In the industrial plants such as foods, medicines or industrial materials, there are big amount of issues on contamination by metallic wear debris originated from pipes of manufacturing lines. In this study, we developed a high gradient magnetic separation system (HGMS) under the dry process by using superconducting magnet to remove the ferromagnetic particles. One of the major problems of dry HGMS systems is, however, the blockage of magnetic filter caused by particle coagulation or deposition. In order to actualize the magnetic separation without blockage, we introduced pneumatic conveyance system as a new method to feed the powder. It is important to increase the drag force acting on the sufficiently dispersed particles, which require strong magnetic fields. To generate the strong magnetic fields, HGMS technique was examined which consists of a magnetic filter and a superconducting solenoid magnet. As a result of the magnetic separation experiment, it was shown that the separation efficiency changes due to the difference of the cohesive property of the particles. On the basis of the result, the adhesion force which acts between the ferromagnetic particles and the medium particles used for the magnetic separation was measured by Atomic Force Microscope (AFM), and cohesion of particles was studied from the aspect of interparticle interaction. We assessed a suitable flow velocity for magnetic separation according to the cohesive property of each particle based on the result.

  18. Properties of Magnetized Quark-Hybrid Stars

    CERN Document Server

    Orsaria, M; Vucetich, H; Weber, F

    2011-01-01

    The structure of a magnetized quark-hybrid stars (QHS) is modeled using a standard relativistic mean-field equation of state (EoS) for the description of hadronic matter. For quark matter we consider a bag model EoS which is modified perturbatively to account for the presence of a uniform magnetic field. The mass-radius (M-R) relationship, gravitational redshift and rotational Kepler periods of such stars are compared with those of standard neutron stars (NS).

  19. Chromenone-conjugated magnetic iron oxide nanoparticles. Toward conveyable DNA binders.

    Science.gov (United States)

    Yousuf, Sameena; Enoch, Israel V M V; Paulraj, Mosae Selvalumar; Dhanaraj, Premnath

    2015-11-01

    Magnetic nanoparticles can transport drug and possibly target cancer. DNA-binding of ligands loaded in dextran coated magnetic nanoparticles, could aid their better target-specific binding. In this work, we report the loading of chromenones onto aminoethylamino-modified dextran coated iron oxide nanoparticles, their loading efficiency, and openness for binding to DNA. The magnetic behavior, the size, and the morphology of the nanoparticles are analyzed. The crystallite size of the magnetic nanoparticles is around 40 nm. The chromenones are present on the surface of the dextran shell, as revealed by their cyclodextrin-binding characteristics, which is a new approach in comprehending the accessibility of the surface-bound molecules by macromolecules. The mode of binding of the chromenones to DNA is not altered on surface loading on dextran shell, although the binding strength is generally diminished, compared to the strength of binding of the free chromenones to DNA.

  20. High performance hybrid magnetic structure for biotechnology applications

    Science.gov (United States)

    Humphries, David E [El Cerrito, CA; Pollard, Martin J [El Cerrito, CA; Elkin, Christopher J [San Ramon, CA

    2009-02-03

    The present disclosure provides a high performance hybrid magnetic structure made from a combination of permanent magnets and ferromagnetic pole materials which are assembled in a predetermined array. The hybrid magnetic structure provides means for separation and other biotechnology applications involving holding, manipulation, or separation of magnetic or magnetizable molecular structures and targets. Also disclosed are further improvements to aspects of the hybrid magnetic structure, including additional elements and for adapting the use of the hybrid magnetic structure for use in biotechnology and high throughput processes.

  1. A hybrid transducer to magnetically and ultrasonically evaluate magnetic fluids.

    Science.gov (United States)

    Bruno, Alexandre Colello; Pavan, Théo Z; Baffa, Oswaldo; Carneiro, Antonio Adilton Oliveira

    2013-09-01

    Ultrasound, magnetic fields, and optical techniques have been explored for clinical diagnosis and therapy. However, these techniques have limitations. In this study, we constructed and characterized a transducer to magnetically and ultrasonically investigate samples labeled with magnetic particles. The transducer is a hybrid system consisting of an ac biosusceptometer (ACB) and an ultrasonic transducer. The basic operation principle consisted of measuring the magnetization and microvibrations of ferromagnetic particles (37 and 70 μm) mixed in yogurt and excited by an external alternating magnetic field generated by the ACB's excitation coils. The vibration of the ferromagnetic particles was measured in phantoms using a Doppler ultrasonic transducer; we verified the sensitivity to detecting the vibrations at low concentrations of ferromagnetic material (~1%). The responses of the susceptometer and Doppler ultrasound linearly depended on the voltage level applied to the magnetizing coils at low ferromagnetic particle concentrations (⩽ 5%). We also conducted a repeatability test on the prototype, which indicated a deviation of 0.94% and 0.25% in the Doppler and susceptometric measurements, respectively. We can conclude that the hybrid transducer technique has potential clinical applications.

  2. Optically induced interaction of magnetic moments in hybrid metamaterials.

    Science.gov (United States)

    Miroshnichenko, Andrey E; Luk'yanchuk, Boris; Maier, Stefan A; Kivshar, Yuri S

    2012-01-24

    We propose a novel type of hybrid metal-dielectric structures composed of silicon nanoparticles and split-ring resonators for advanced control of optically induced magnetic response. We reveal that a hybrid "metamolecule" may exhibit a strong distance-dependent magnetic interaction that may flip the magnetization orientation and support "antiferromagnetic" ordering in a hybrid metamaterial created by a periodic lattice of such metamolecules. The propagation of magnetization waves in the hybrid structures opens new ways for manipulating artificial "antiferromagnetic" ordering at high frequencies. © 2011 American Chemical Society

  3. Analysis and design of permanent magnet biased magnetic bearing based on hybrid factor

    Directory of Open Access Journals (Sweden)

    Jinji Sun

    2016-03-01

    Full Text Available In this article, hybrid factor is proposed for hybrid magnetic bearing. The hybrid factor is defined as the ratio of the force produced by the permanent magnet and the forces produced by the permanent magnet and current in hybrid magnetic bearing. It is deduced from a certain radial hybrid magnetic bearing using its important parameters such as the current stiffness and displacement stiffness at first and then the dynamic model of magnetically suspended rotor system is established. The relationship between structural parameters and control system parameters is analyzed based on the hybrid factor. Some influencing factors of hybrid factor in hybrid magnetic bearing, such as the size of the permanent magnet, length of air gap, and area of the stator poles, are analyzed in this article. It can be concluded that larger hybrid factor can be caused by the smaller power loss according to the definition of hybrid factor mentioned above. Meanwhile, the hybrid factor has a maximum value, which is related to control system parameters such as proportional factor expect for structural parameters. Finally, the design steps of parameters of hybrid magnetic bearing can be concluded.

  4. Axisymmetric Magnetic Mirror Fusion-Fission Hybrid

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Martovetsky, N. N. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Molvik, A. W. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ryutov, D. D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Simonen, T. C. [Univ. of California, Berkeley, CA (United States)

    2011-05-13

    The achieved performance of the gas dynamic trap version of magnetic mirrors and today’s technology we believe are sufficient with modest further efforts for a neutron source for material testing (Q=Pfusion/Pinput~0.1). The performance needed for commercial power production requires considerable further advances to achieve the necessary high Q>>10. An early application of the mirror, requiring intermediate performance and intermediate values of Q~1 are the hybrid applications. The Axisymmetric Mirror has a number of attractive features as a driver for a fusion-fission hybrid system: geometrical simplicity, inherently steady-state operation, and the presence of the natural divertors in the form of end tanks. This level of physics performance has the virtue of low risk and only modest R&D needed and its simplicity promises economy advantages. Operation at Q~1 allows for relatively low electron temperatures, in the range of 4 keV, for the DT injection energy ~ 80 keV. A simple mirror with the plasma diameter of 1 m and mirror-to-mirror length of 35 m is discussed. Simple circular superconducting coils are based on today’s technology. The positive ion neutral beams are similar to existing units but designed for steady state. A brief qualitative discussion of three groups of physics issues is presented: axial heat loss, MHD stability in the axisymmetric geometry, microstability of sloshing ions. Burning fission reactor wastes by fissioning actinides (transuranics: Pu, Np, Am, Cm, .. or just minor actinides: Np, Am, Cm, …) in the hybrid will multiply fusion’s energy by a factor of ~10 or more and diminish the Q needed to less than 1 to overcome the cost of recirculating power for good economics. The economic value of destroying actinides by fissioning is rather low based on either the cost of long-term storage or even deep geologic disposal so most of the revenues of hybrids will come from electrical power. Hybrids that obtain revenues from

  5. Hybrid magnet project at Tohoku University

    Energy Technology Data Exchange (ETDEWEB)

    Nakagawa, Y.; Noto, K.; Hoshi, A.; Miura, S.; Watanabe, K.; Muto, Y. (Tohoku University (Japan))

    1984-01-01

    The construction of three hybrid magnets has been conceived in this project. The smallest one now in operation is composed of a non-cryostable NbTi coil weighing 270 kg and a Bitter coil with a power of 3.1 MW, producing 20 T field in a 32 mm diameter bore. The second one, 20 T in 52 mm at present, will produce 23 T when the power supply will be enlarged to 8 MW. The largest one, 31 T in 32 mm or 29 T in 52 mm, has been designed to consist of a multifilamentary Nb/sub 3/Sn + NbTi coil and a polyhelix-type water-cooled coil.

  6. Hybrid Superconducting Magnetic Bearing (HSMB) for high load devices

    Science.gov (United States)

    McMichael, C. K.; Ma, K. B.; Lamb, M. A.; Lin, M. W.; Chow, L.; Meng, R. L.; Hor, P. H.; Chu, W. K.

    1992-05-01

    Lifting capacities greater than 41 N/cm(exp 2) (60 psi) at 77 K have been achieved with a new type of levitation (hybrid) using a combination of permanent magnets and high quality melt-mixtured YBa2Cu3O(7-delta) (YBCO). The key concept of the hybrid superconducting magnetic bearing (HSMB) is the use of strong magnetic repulsion and attraction from permanent magnets for high levitation or suspension forces in conjunction with a superconductor's flux pinning characteristics to counteract the inherent instabilities in a system consisting of magnets only. To illustrate this concept, radial and axial forces between magnet/superconductor, magnet/magnet, and magnet/superconductor/magnet, were measured and compared for the thrust bearing configuration

  7. Mechanism of hybrid-magnetic-circuit multi-couple motor

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Discusses the interval between laminations in a permanent-magnet inductor motor which makes the air-gap magnetic field produced by the permanent magnet very uneven in the axial direction, and limits the performance of a motor. Proposes a hybrid-magnetic-circuit multi-couple motor to compensate for the uneven air-gap magnetic field, thereby improving the performance of a motor.

  8. Design of Magnetic Flux Feedback Controller in Hybrid Suspension System

    Directory of Open Access Journals (Sweden)

    Wenqing Zhang

    2013-01-01

    Full Text Available Hybrid suspension system with permanent magnet and electromagnet consumes little power consumption and can realize larger suspension gap. But realizing stable suspension of hybrid magnet is a tricky problem in the suspension control sphere. Considering from this point, we take magnetic flux signal as a state variable and put this signal back to suspension control system. So we can get the hybrid suspension mathematical model based on magnetic flux signal feedback. By application of MIMO feedback linearization theory, we can further realize linearization of the hybrid suspension system. And then proportion, integral, differentiation, magnetic flux density B (PIDB controller is designed. Some hybrid suspension experiments have been done on CMS04 magnetic suspension bogie of National University of Defense Technology (NUDT in China. The experiments denote that the new hybrid suspension control algorithm based on magnetic flux signal feedback designed in this paper has more advantages than traditional position-current double cascade control algorithm. Obviously, the robustness and stability of hybrid suspension system have been enhanced.

  9. Organic-inorganic hybrid polymer-encapsulated magnetic nanobead catalysts.

    Science.gov (United States)

    Arai, Takayoshi; Sato, Toru; Kanoh, Hirofumi; Kaneko, Katsumi; Oguma, Koichi; Yanagisawa, Akira

    2008-01-01

    A new strategy for the encapsulation of magnetic nanobeads was developed by using the in situ self-assembly of an organic-inorganic hybrid polymer. The hybrid polymer of {[Cu(bpy)(BF(4))(2)(H(2)O)(2)](bpy)}(n) (bpy=4,4'-bipyridine) was constructed on the surface of amino-functionalized magnetic beads and the resulting hybrid-polymer-encapsulated beads were utilized as catalysts for the oxidation of silyl enolates to provide the corresponding alpha-hydroxy carbonyl compounds in high yield. After the completion of the reaction, the catalyst was readily recovered by magnetic separation and the recovered catalyst could be reused several times. Because the current method did not require complicated procedures for incorporating the catalyst onto the magnetic beads, the preparation and the application of various other types of organic-inorganic hybrid-polymer-coated magnetic beads could be possible.

  10. Preparation and characterization of functional silica hybrid magnetic nanoparticles

    Science.gov (United States)

    Digigow, Reinaldo G.; Dechézelles, Jean-François; Dietsch, Hervé; Geissbühler, Isabelle; Vanhecke, Dimitri; Geers, Christoph; Hirt, Ann M.; Rothen-Rutishauser, Barbara; Petri-Fink, Alke

    2014-08-01

    We report on the synthesis and characterization of functional silica hybrid magnetic nanoparticles (SHMNPs). The co-condensation of 3-aminopropyltriethoxysilane (APTES) and tetraethyl orthosilicate (TEOS) in presence of superparamagnetic iron oxide nanoparticles (SPIONs) leads to hybrid magnetic silica particles that are surface-functionalized with primary amino groups. In this work, a comprehensive synthetic study is carried out and completed by a detailed characterization of hybrid particles' size and morphology, surface properties, and magnetic responses using different techniques. Depending on the mass ratio of SPIONs and the two silanes (TEOS and APTES), we were able to adjust the number of surface amino groups and tune the magnetic properties of the superparamagnetic hybrid particles.

  11. Wave propagation in fluid-conveying viscoelastic carbon nanotubes under longitudinal magnetic field with thermal and surface effect via nonlocal strain gradient theory

    Science.gov (United States)

    Zhen, Yaxin; Zhou, Lin

    2017-03-01

    Based on nonlocal strain gradient theory, wave propagation in fluid-conveying viscoelastic single-walled carbon nanotubes (SWCNTs) is studied in this paper. With consideration of thermal effect and surface effect, wave equation is derived for fluid-conveying viscoelastic SWCNTs under longitudinal magnetic field utilizing Euler-Bernoulli beam theory. The closed-form expressions are derived for the frequency and phase velocity of the wave motion. The influences of fluid flow velocity, structural damping coefficient, temperature change, magnetic flux and surface effect are discussed in detail. SWCNTs’ viscoelasticity reduces the wave frequency of the system and the influence gets remarkable with the increase of wave number. The fluid in SWCNTs decreases the frequency of wave propagation to a certain extent. The frequency (phase velocity) gets larger due to the existence of surface effect, especially when the diameters of SWCNTs and the wave number decrease. The wave frequency increases with the increase of the longitudinal magnetic field, while decreases with the increase of the temperature change. The results may be helpful for better understanding the potential applications of SWCNTs in nanotechnology.

  12. Hybrid composites of xanthan and magnetic nanoparticles for cellular uptake.

    Science.gov (United States)

    Bueno, Vânia Blasques; Silva, Anielle Martins; Barbosa, Leandro Ramos Souza; Catalani, Luiz Henrique; Teixeira-Neto, Erico; Cornejo, Daniel Reinaldo; Petri, Denise Freitas Siqueira

    2013-11-04

    We describe a fast and simple method to prepare composite films of magnetite nanoparticles and xanthan networks. The particles are distributed close to hybrid film surface, generating a coercivity of 27 ± 2 Oe at 300 K. The proliferation of fibroblast cells on the hybrid composites was successful, particularly when an external magnetic field was applied.

  13. Rotational characteristics in the resonance state of the HTSC-permanent magnet hybrid magnetic bearing

    Energy Technology Data Exchange (ETDEWEB)

    Morii, Y.; Sukedai, M. [Kansai University, 3-3-35 Yamate-cho, Suita, Osaka 564-8680 (Japan); Ohashi, S., E-mail: ohashi@kansai-u.ac.jp [Kansai University, 3-3-35 Yamate-cho, Suita, Osaka 564-8680 (Japan)

    2011-11-15

    The hybrid magnetic bearing has been developed. In the hybrid system, effect of the pinning force becomes smaller. Influence of the vibration and the gradient angle in the resonance state is large. The resonance frequency becomes small in the hybrid bearing system. The hybrid magnetic bearing using permanent magnets and the high-Tc bulk superconductor (HTSC) has been developed. Repulsive force of the permanent magnet is introduced to increase the load weight of the magnetic bearing. Effect of the hybrid system has been shown. In this paper, influence of the hybrid system on the dynamic characteristics of the rotor is studied. The rotational characteristics in the mechanical resonance state are studied, and the equivalent magnetic spring coefficient is estimated from the experimental results of the load weight. The resonance frequency is measured by the rotation experiments. The rotor achieves stable levitation even in the resonance state. In the hybrid system, effect of the pinning force becomes smaller than that of the lateral force generated by the repulsive force between the two permanent magnets at the smaller air gap. Thus influence of the lateral vibration and the gradient angle in the resonance state becomes larger at a smaller air gap. The equivalent magnetic spring coefficient becomes also small, and the resonance frequency becomes small in the hybrid bearing system.

  14. Hybrid Spintronic Structures With Magnetic Oxides and Heusler Alloys

    DEFF Research Database (Denmark)

    Xu, Y. B.; Hassan, S. S. A.; Wong, P. K. J.;

    2008-01-01

    Hybrid spintronic structures, integrating half-metallic magnetic oxides and Heusler alloys with their predicted high spin polarization, are important for the development of second-generation spintronics with high-efficient spin injection. We have synthesized epitaxial magnetic oxide Fe3O4 on GaAs...

  15. Hybride magnetic nanostructure based on amino acids functionalized polypyrrole

    Science.gov (United States)

    Nan, Alexandrina; Bunge, Alexander; Turcu, Rodica

    2015-12-01

    Conducting polypyrrole is especially promising for many commercial applications because of its unique optical, electric, thermal and mechanical properties. We report the synthesis and characterization of novel pyrrole functionalized monomers and core-shell hybrid nanostructures, consisting of a conjugated polymer layer (amino acids functionalized pyrrole copolymers) and a magnetic nanoparticle core. For functionalization of the pyrrole monomer we used several amino acids: tryptophan, leucine, phenylalanine, serine and tyrosine. These amino acids were linked via different types of hydrophobic linkers to the nitrogen atom of the pyrrole monomer. The magnetic core-shell hybrid nanostructures are characterized by various methods such as FTIR spectroscopy, transmission electron microscopy (TEM) and magnetic measurements.

  16. Hybride magnetic nanostructure based on amino acids functionalized polypyrrole

    Energy Technology Data Exchange (ETDEWEB)

    Nan, Alexandrina, E-mail: alexandrina.nan@itim-cj.ro; Bunge, Alexander; Turcu, Rodica [National Institute for Research and Development of Isotopic and Molecular Technologies, 67-103 Donat, 400293 Cluj-Napoca (Romania)

    2015-12-23

    Conducting polypyrrole is especially promising for many commercial applications because of its unique optical, electric, thermal and mechanical properties. We report the synthesis and characterization of novel pyrrole functionalized monomers and core-shell hybrid nanostructures, consisting of a conjugated polymer layer (amino acids functionalized pyrrole copolymers) and a magnetic nanoparticle core. For functionalization of the pyrrole monomer we used several amino acids: tryptophan, leucine, phenylalanine, serine and tyrosine. These amino acids were linked via different types of hydrophobic linkers to the nitrogen atom of the pyrrole monomer. The magnetic core-shell hybrid nanostructures are characterized by various methods such as FTIR spectroscopy, transmission electron microscopy (TEM) and magnetic measurements.

  17. Development of a 40 T compact hybrid magnet

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, K.; Awaji, S.; Kobayashi, N. [Tohoku Univ., Sendai (Japan). Inst. for Materials Research] [and others

    1996-07-01

    A 40 T compact hybrid magnet consisting of a 16 T outer superconducting magnet and a 24 T inner resistive magnet is conceptually designed. A highly strengthened superconducting magnet with a 360 mm room temperature bore can be made using newly developed (Nb,Ti){sub 3}Sn wires with Cu-Nb or Cu-Al{sub 2}O{sub 3} reinforcing stabilizer, and as a result the coil weight is outstandingly reduced by about 70%. A poly-Bitter resistive magnet which generates 24 T in a 14 mm room temperature bore is realized consuming 8 MW power.

  18. CSEM-Steel hybrid wiggler/undulator magnetic field studies

    Energy Technology Data Exchange (ETDEWEB)

    Halbach, K.; Hoyer, E.; Marks, S.; Plate, D.; Shuman, D.

    1985-06-01

    Current design of permanent magnet wiggler/undulators use either pure charge sheet equivalent material (CSEM) or the CSEM-Steel hybrid configuration. Hybrid configurations offer higher field strength at small gaps, field distributions dominated by the pole surfaces and pole tuning. Nominal performance of the hybrid is generally predicted using a 2-D magnetic design code neglecting transverse geometry. Magnetic measurements are presented showing transverse configuration influence on performance, from a combination of models using CSEMs, REC (H/sub c/ = 9.2 KOe) and NdFe (H/sub c/ = 10.7 kOe), different pole widths and end configurations. Results show peak field improvement using NdFe in place of REC in identical models, gap peak field decrease with pole width decrease (all results less than computed 2-D fields), transverse gap field distributions, and importance of CSEM material overhanging the poles in the transverse direction for highest gap fields. 3 refs., 6 figs.

  19. Design and resistive inserts for NHMFL 45-T hybrid magnet

    Energy Technology Data Exchange (ETDEWEB)

    Bird, M.D.; Bole, S.; Eyssa, Y.M.; Gao, B.J.; Zhang, H.; Schneider-Muntau, H.J. [National High Magnetic Field Lab., Tallahassee, FL (United States)

    1994-07-01

    The authors present conceptual designs for 24--27 MW hybrid magnet inserts generating more than 31 T in a warm bore of 32 mm to be installed at the new National High Magnetic Field Laboratory (NHMFL). The insert housing is designed to accommodate both axially and radially cooled magnets although here they only present axially cooled designs. The magnet coils are radially partitioned (poly-Bitter) to provide high fields at moderate stress and cooling levels. GlidCop, Cu-Be and Cu-Ag conductors are considered providing resistive fields at high as 34 T in a background field of 14 T.

  20. Thermal properties of a large-bore cryocooled 10 T superconducting magnet for a hybrid magnet

    Energy Technology Data Exchange (ETDEWEB)

    Ishizuka, M., E-mail: Mas_Ishizuka@shi.co.j [Graduate School of Engineering, Tohoku University, 6-6 Aramaki Aza Aoba, Aoba-ku, Sendai 980-8579 (Japan); Research and Development Center, Sumitomo Heavy Industries, Ltd., 19 Natsushima-chou, Yokosuka, Kanagawa 237-8555 (Japan); Hamajima, T. [Graduate School of Engineering, Tohoku University, 6-6 Aramaki Aza Aoba, Aoba-ku, Sendai 980-8579 (Japan); Itou, T. [Ehime Works, Sumitomo Heavy Industries, Ltd., 5-2 Soubiraki-cho, Niihama, Ehime 792-8588 (Japan); Sakuraba, J. [Research and Development Center, Sumitomo Heavy Industries, Ltd., 19 Natsushima-chou, Yokosuka, Kanagawa 237-8555 (Japan); Nishijima, G.; Awaji, S.; Watanabe, K. [Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577 (Japan)

    2010-11-01

    A cryocooled 10 T superconducting magnet with a 360 mm room temperature bore has been developed for a hybrid magnet. The superconducting magnet cooled by four Gifford-McMahon cryocoolers has been designed to generate a magnetic field of 10 T. Since superconducting wires composed of coils were subjected to large hoop stress over 150 MPa and Nb{sub 3}Sn superconducting wires particularly showed a low mechanical strength due to those brittle property, Nb{sub 3}Sn wires strengthened by NbTi-filaments were developed for the cryocooled superconducting magnet. We have already reported that the hybrid magnet could generate the resultant magnetic field of 27.5 T by adding 8.5 T from the superconducting magnet and 19 T from a water-cooled Bitter resistive magnet, after the water-cooled resistive magnet was inserted into the 360 mm room temperature bore of the cryocooled superconducting magnet. When the hybrid magnet generated the field of 27.5 T, it achieved the high magnetic-force field (B x {partial_derivative}Bz/{partial_derivative}z) of 4500 T{sup 2}/m, which was useful for magneto-science in high fields such as materials levitation research. In this paper, we particularly focus on the cause that the cryocooled superconducting magnet was limited to generate the designed magnetic field of 10 T in the hybrid magnet operation. As a result, it was found that there existed mainly two causes as the limitation of the magnetic field generation. One was a decrease of thermal conductive passes due to exfoliation from the coil bobbin of the cooling flange. The other was large AC loss due to both a thick Nb{sub 3}Sn layer and its large diameter formed on Nb-barrier component in Nb{sub 3}Sn wires.

  1. Single axis controlled hybrid magnetic bearing for left ventricular assist device: hybrid core and closed magnetic circuit.

    Science.gov (United States)

    da Silva, Isaias; Horikawa, Oswaldo; Cardoso, Jose R; Camargo, Fernando A; Andrade, Aron J P; Bock, Eduardo G P

    2011-05-01

    In previous studies, we presented main strategies for suspending the rotor of a mixed-flow type (centrifugal and axial) ventricular assist device (VAD), originally presented by the Institute Dante Pazzanese of Cardiology (IDPC), Brazil. Magnetic suspension is achieved by the use of a magnetic bearing architecture in which the active control is executed in only one degree of freedom, in the axial direction of the rotor. Remaining degrees of freedom, excepting the rotation, are restricted only by the attraction force between pairs of permanent magnets. This study is part of a joint project in development by IDPC and Escola Politecnica of São Paulo University, Brazil. This article shows advances in that project, presenting two promising solutions for magnetic bearings. One solution uses hybrid cores as electromagnetic actuators, that is, cores that combine iron and permanent magnets. The other solution uses actuators, also of hybrid type, but with the magnetic circuit closed by an iron core. After preliminary analysis, a pump prototype has been developed for each solution and has been tested. For each prototype, a brushless DC motor has been developed as the rotor driver. Each solution was evaluated by in vitro experiments and guidelines are extracted for future improvements. Tests have shown good results and demonstrated that one solution is not isolated from the other. One complements the other for the development of a single-axis-controlled, hybrid-type magnetic bearing for a mixed-flow type VAD.

  2. Hybrid high gradient permanent magnet quadrupole

    Science.gov (United States)

    N'gotta, P.; Le Bec, G.; Chavanne, J.

    2016-12-01

    This paper presents an innovative compact permanent magnet quadrupole with a strong gradient for potential use in future light source lattices. Its magnetic structure includes simple mechanical parts, rectangular permanent magnet blocks and soft iron poles. It has a wide aperture in the horizontal plane to accommodate an x-ray beam port, a common constraint in storage ring-based light sources. This specificity introduces field quality deterioration because of the resulting truncation of the poles; a suitable field quality can be restored with an optimized pole shape. A 82 T /m prototype with a bore radius of 12 mm and a 10 mm vertical gap between poles has been constructed and magnetically characterized. Gradient inhomogeneities better than 10-3 in the good field region were obtained after the installation of special shims.

  3. Rotational characteristics in the resonance state of the HTSC-permanent magnet hybrid magnetic bearing

    Science.gov (United States)

    Morii, Y.; Sukedai, M.; Ohashi, S.

    2011-11-01

    The hybrid magnetic bearing using permanent magnets and the high-Tc bulk superconductor (HTSC) has been developed. Repulsive force of the permanent magnet is introduced to increase the load weight of the magnetic bearing. Effect of the hybrid system has been shown. In this paper, influence of the hybrid system on the dynamic characteristics of the rotor is studied. The rotational characteristics in the mechanical resonance state are studied, and the equivalent magnetic spring coefficient is estimated from the experimental results of the load weight. The resonance frequency is measured by the rotation experiments. The rotor achieves stable levitation even in the resonance state. In the hybrid system, effect of the pinning force becomes smaller than that of the lateral force generated by the repulsive force between the two permanent magnets at the smaller air gap. Thus influence of the lateral vibration and the gradient angle in the resonance state becomes larger at a smaller air gap. The equivalent magnetic spring coefficient becomes also small, and the resonance frequency becomes small in the hybrid bearing system.

  4. Superconducting and hybrid systems for magnetic field shielding

    Science.gov (United States)

    Gozzelino, L.; Gerbaldo, R.; Ghigo, G.; Laviano, F.; Truccato, M.; Agostino, A.

    2016-03-01

    In this paper we investigate and compare the shielding properties of superconducting and hybrid superconducting/ferromagnetic systems, consisting of cylindrical cups with an aspect ratio of height/radius close to unity. First, we reproduced, by finite-element calculations, the induction magnetic field values measured along the symmetry axis in a superconducting (MgB2) and in a hybrid configuration (MgB2/Fe) as a function of the applied magnetic field and of the position. The calculations are carried out using the vector potential formalism, taking into account simultaneously the non-linear properties of both the superconducting and the ferromagnetic material. On the basis of the good agreement between the experimental and the computed data we apply the same model to study the influence of the geometric parameters of the ferromagnetic cup as well as of the thickness of the lateral gap between the two cups on the shielding properties of the superconducting cup. The results show that in the considered non-ideal geometry, where the edge effect in the flux penetration cannot be disregarded, the superconducting shield is always the most efficient solution at low magnetic fields. However, a partial recovery of the shielding capability of the hybrid configuration occurs if a mismatch in the open edges of the two cups is considered. In contrast, at high magnetic fields the hybrid configurations are always the most effective. In particular, the highest shielding factor was found for solutions with the ferromagnetic cup protruding over the superconducting one.

  5. Magnetic properties of hybrid elastomers with magnetically hard fillers: rotation of particles

    Science.gov (United States)

    Stepanov, G. V.; Borin, D. Yu; Bakhtiiarov, A. V.; Storozhenko, P. A.

    2017-03-01

    Hybrid magnetic elastomers belonging to the family of magnetorheological elastomers contain magnetically hard components and are of the utmost interest for the development of semiactive and active damping devices as well as actuators and sensors. The processes of magnetizing of such elastomers are accompanied by structural rearrangements inside the material. When magnetized, the elastomer gains its own magnetic moment resulting in changes of its magneto-mechanical properties, which remain permanent, even in the absence of external magnetic fields. Influenced by the magnetic field, magnetized particles move inside the matrix forming chain-like structures. In addition, the magnetically hard particles can rotate to align their magnetic moments with the new direction of the external field. Such an elastomer cannot be demagnetized by the application of a reverse field.

  6. Statics of levitated vehicle model with hybrid magnets

    Institute of Scientific and Technical Information of China (English)

    Desheng LI; Zhiyuan LU; Tianwu DONG

    2009-01-01

    By studying the special characteristics of permanent and electronic magnets, a levitated vehicle model with hybrid magnets is established. The mathematical model of the vehicle is built based on its dynamics equation by studying its machine structure and working principle. Based on the model, the basic characteristics and the effect between the excluding forces from permanent magnets in three different spatial directions are analyzed, statics characteristics of the interference forces in three different spatial directions are studied, and self-adjusting equilibrium characteristics and stabilization are analyzed. Based on the structure above, the vehicle can levitate steadily by control system adjustment.

  7. Magnetic equivalent circuit model for unipolar hybrid excitation synchronous machine

    Directory of Open Access Journals (Sweden)

    Kupiec Emil

    2015-03-01

    Full Text Available Lately, there has been increased interest in hybrid excitation electrical machines. Hybrid excitation is a construction that combines permanent magnet excitation with wound field excitation. Within the general classification, these machines can be classified as modified synchronous machines or inductor machines. These machines may be applied as motors and generators. The complexity of electromagnetic phenomena which occur as a result of coupling of magnetic fluxes of separate excitation systems with perpendicular magnetic axis is a motivation to formulate various mathematical models of these machines. The presented paper discusses the construction of a unipolar hybrid excitation synchronous machine. The magnetic equivalent circuit model including nonlinear magnetization curves is presented. Based on this model, it is possible to determine the multi-parameter relationships between the induced voltage and magnetomotive force in the excitation winding. Particular attention has been paid to the analysis of the impact of additional stator and rotor yokes on above relationship. Induced voltage determines the remaining operating parameters of the machine, both in the motor and generator mode of operation. The analysis of chosen correlations results in an identification of the effective control range of electromotive force of the machine.

  8. A Practical Permanent Magnetic Motor Drive for Hybrid Motorcycle

    Institute of Scientific and Technical Information of China (English)

    崔巍; 江建中; 邵定国; 杨斌

    2003-01-01

    A novel embedded-type permanent magnetic motor for hybrid motorcycle, which employs asymmetric design of eccentric air-gap, is proposed in the paper. This special design of air-gap well conforms to the mono-directional operation characteristic of motorcycle and effectively suppresses the distortion of air-gap magnetic field caused by armature reaction. Hence the torque ripple is reduced. A drive system consisting of the newly-designed Nd-Fe-B permanent magnet synchronous motor and parallel-MOSFET threephase inverter for hybrid motorcycle propulsion is established. Wide-range speed operation is realized through a simple and novel control strategy. Computer simulation is described and experimental results given to verify the practicality of the proposed motor design and control strategy.

  9. Pneumatic conveying design guide

    CERN Document Server

    Mills, David

    1990-01-01

    Pneumatic Conveying Design Guide is a guide for the design of pneumatic conveying systems and includes detailed data and information on the conveying characteristics of a number of materials with a wide range of properties. This book includes logic diagrams for design procedures and scaling parameters for the conveying line configuration. It also explains how to improve the performance of pneumatic conveyors by optimizing, uprating, and extending the system or adapting it for a change of material. This book consists of 15 chapters divided into three sections and opens with an overview of the s

  10. Modeling of Hybrid Permanent Magnetic-Gas Bearings

    DEFF Research Database (Denmark)

    Morosi, Stefano; Santos, Ilmar

    2009-01-01

    Modern turbomachinery applications require nowadays ever-growing rotational speeds and high degree of reliability. It then becomes natural to focus the attention of the research to contact-free bearings elements. The present alternatives focus on gas lubricated journal bearings or magnetic bearings....... In the present paper both the technologies are combined with the aim of developing a new kind of hybrid permanent magnetic - gas bearing. This new kind of machine is intended to exploit the benefits of the two technologies while minimizing their drawbacks. The poor start-up and low speed operation performance...... of the gas bearing is balanced by the properties of the passive magnetic one. At high speeds the dynamic characteristics of the gas bearing are improved by offsetting the stator ring of the permanent magnetic bearing. Furthermore this design shows a kind of redundancy, which offers soft failure properties...

  11. Modeling of Hybrid Permanent Magnetic-Gas Bearings

    DEFF Research Database (Denmark)

    Morosi, Stefano; Santos, Ilmar

    2009-01-01

    Modern turbomachinery applications require nowadays ever-growing rotational speeds and high degree of reliability. It then becomes natural to focus the attention of the research to contact-free bearings elements. The present alternatives focus on gas lubricated journal bearings or magnetic bearings...... concentric rings with radial magnetic orientation - analytical expressions for the calculation of the magnetic flux density and forces are employed, opposed to the main literature trend where finite element software is utilized at least for the calculation of the B-field. Numerical analysis shows how...... the rotor equilibrium position can be made independent on the rotational speed and applied load; it becomes function of the passive magnetic bearing offset. By adjusting the offset it is possible to significantly influence the dynamic coefficients of the hybrid bearing....

  12. Photovoltaic-wind hybrid system for permanent magnet DC motor

    Science.gov (United States)

    Nasir, M. N. M.; Lada, M. Y.; Baharom, M. F.; Jaafar, H. I.; Ramani, A. N.; Sulaima, M. F.

    2015-05-01

    Hybrid system of Photovoltaic (PV) - Wind turbine (WT) generation has more advantages and reliable compared to PV or wind turbine system alone. The aim of this paper is to model and design hybrid system of PV-WT supplying 100W permanent-magnet dc motor. To achieve the objective, both of PV and WT are connected to converter in order to get the same source of DC supply. Then both sources were combined and straightly connected to 100W permanent magnet dc motor. All the works in this paper is only applied in circuit simulator by using Matlab Simulink. The output produced from each converter is expected to be suit to the motor specification. The output produced from each renewable energy system is as expected to be high as it can support the motor if one of them is breakdown

  13. Analysis and Design of Hybrid Excitation Permanent Magnet Synchronous Generators

    Institute of Scientific and Technical Information of China (English)

    JIN Wan-bing; ZHANG Dong; AN Zhong-liang; TAN Ren-yuan

    2006-01-01

    On the basis of a conventional permanent magnet (PM) synchronous generator's construction,a novel kind of Hybrid Excitation Permanent Magnet Synchronous Generator (HEPMSG) is introduced by inserting exciting winding in the stator or rotor.Firstly,the construction of HEPMSG is improved with the addition of PM excitation on the ferromagnetic pole,and its working principle and design method are studied in detail.Then,an appropriate exciting current control system is presented considering the characteristics of HEPMSG.Finally,a prototype is made,and test results confirm the analysis and design.

  14. Hybrid material as contrast agent in magnetic resonance images

    OpenAIRE

    Botella Asunción, Pablo; Cabrera García, Alejandro

    2015-01-01

    [EN] The invention relates to a contrast agent of magnetic resonance based on a hybrid material formed by an organo-metallic core derived from Prussian blue and a silica cover, and optionally, molecules of a poly(ethylene glycol), a fluorescent agent, a radio nucleus and/or a substance that directs to specific receptors, cells or tissues, joined by covalent bonding to the surface of the inorganic cover.

  15. Hybrid material as contrast agent in magnetic resonance images

    OpenAIRE

    Botella Asunción, Pablo; Cabrera García, Alejandro

    2015-01-01

    [EN] The invention relates to a contrast agent of magnetic resonance based on a hybrid material formed by an organo-metallic core derived from Prussian blue and a silica cover, and optionally, molecules of a poly(ethylene glycol), a fluorescent agent, a radio nucleus and/or a substance that directs to specific receptors, cells or tissues, joined by covalent bonding to the surface of the inorganic cover.

  16. Improvement of the Levitation Characteristics in the Magnetic Bearing System Using HTSC-Permanent Magnet Hybrid Structure

    Science.gov (United States)

    Ohashi, Shunsuke

    Magnetic bearing using pining force of a permanent magnet and a high-temperature superconductor has been developed. Additional permanent magnet is introduced to increase the levitation force of the magnetic bearing. In this hybrid magnetic bearing system, levitation force is mainly given by the repulsive force of the permanent magnets, and stability for the lateral direction is given by pining force of the superconductor. The experimental device is developed. A ring type superconductor and a bulk one are examined. Levitation characteristics of the hybrid magnetic bearing are measured. A bulk superconductor shows better characteristics both levitation and lateral stability than ring one. Levitation force of the hybrid system becomes about twice as large as that of the no-hybrid one. Although repulsive force of the permanent magnet decreases lateral stability of the system, its influence becomes small by choosing adequate position of the permanent magnets and the superconductor.

  17. Magnetic Hybrid Nanosorbents for the Uptake of Paraquat from Water.

    Science.gov (United States)

    Fernandes, Tiago; Soares, Sofia F; Trindade, Tito; Daniel-da-Silva, Ana L

    2017-03-18

    Although paraquat has been banned in European countries, this herbicide is still used all over the world, thanks to its low-cost, high-efficiency, and fast action. Because paraquat is highly toxic to humans and animals, there is interest in mitigating the consequences of its use, namely by implementing removal procedures capable of curbing its environmental and health risks. This research describes new magnetic nanosorbents composed of magnetite cores functionalized with bio-hybrid siliceous shells, that can be used to uptake paraquat from water using magnetically-assisted procedures. The biopolymers κ-carrageenan and starch were introduced into the siliceous shells, resulting in two hybrid materials, Fe₃O₄@SiO₂/SiCRG and Fe₃O₄@SiO₂/SiStarch, respectively, that exhibit a distinct surface chemistry. The Fe₃O₄@SiO₂/SiCRG biosorbents displayed a superior paraquat removal performance, with a good fitting to the Langmuir and Toth isotherm models. The maximum adsorption capacity of paraquat for Fe₃O₄@SiO₂/SiCRG biosorbents was 257 mg·g(-1), which places this sorbent among the best systems for the removal of this herbicide from water. The interesting performance of the κ-carrageenan hybrid, along with its magnetic properties and good regeneration capacity, presents a very efficient way for the remediation of water contaminated with paraquat.

  18. Magnetic Hybrid Nanosorbents for the Uptake of Paraquat from Water

    Directory of Open Access Journals (Sweden)

    Tiago Fernandes

    2017-03-01

    Full Text Available Although paraquat has been banned in European countries, this herbicide is still used all over the world, thanks to its low-cost, high-efficiency, and fast action. Because paraquat is highly toxic to humans and animals, there is interest in mitigating the consequences of its use, namely by implementing removal procedures capable of curbing its environmental and health risks. This research describes new magnetic nanosorbents composed of magnetite cores functionalized with bio-hybrid siliceous shells, that can be used to uptake paraquat from water using magnetically-assisted procedures. The biopolymers κ-carrageenan and starch were introduced into the siliceous shells, resulting in two hybrid materials, Fe3O4@SiO2/SiCRG and Fe3O4@SiO2/SiStarch, respectively, that exhibit a distinct surface chemistry. The Fe3O4@SiO2/SiCRG biosorbents displayed a superior paraquat removal performance, with a good fitting to the Langmuir and Toth isotherm models. The maximum adsorption capacity of paraquat for Fe3O4@SiO2/SiCRG biosorbents was 257 mg·g−1, which places this sorbent among the best systems for the removal of this herbicide from water. The interesting performance of the κ-carrageenan hybrid, along with its magnetic properties and good regeneration capacity, presents a very efficient way for the remediation of water contaminated with paraquat.

  19. Study on the Levitation and Restoring Force Characteristics of the Improved HTS-permanent Magnet Hybrid Magnetic Bearing

    Science.gov (United States)

    Sugiyama, R.; Oguni, K.; Ohashi, S.

    We have developed the hybrid magnetic bearing using permanent magnets and high temperature bulk super conductor (HTS). In this system, the permanent magnet has ring type structure so that the permanent magnet and the HTS can be set to the stator. The pinning force of the HTS is used for the levitation and the guidance. Repulsive force of the permanent magnets was used in the conventional hybrid system. However the restoring force in the guidance direction of the conventional hybrid system decreases by the side slip force of the permanent magnets. In this research, attractive force of permanent magnets is used for increasing the load weight in the guidance direction. In this paper, influence of the hybrid system on the static characteristics of the rotor is studied. Three-dimensional numerical analysis of the linkage flux (in the levitation and the guidance direction) in the HTS is undertaken. The stator side permanent magnet increases the linkage flux of the levitation direction. Therefore in the hybrid system the linkage flux of the levitation direction increases. The levitation and restoring force of the rotor is measured. The levitation force of the hybrid system becomes smaller than that of the non-hybrid one by attractive force. The rotor in the hybrid system is supported by the pinning force and attractive force. The restoring force of the hybrid system becomes larger than that of the non-hybrid one because of increasing the linkage flux of the levitation direction.

  20. Magnetic properties of the magnetic hybrid membranes based on various polymer matrices and inorganic fillers

    Energy Technology Data Exchange (ETDEWEB)

    Rybak, Aleksandra, E-mail: Aleksandra.Rybak@polsl.pl [Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, Strzody 9, 44-100 Gliwice (Poland); Kaszuwara, Waldemar [Faculty of Materials Science and Engineering, Warsaw University of Technology, Woloska 141, 02-507 Warszawa (Poland)

    2015-11-05

    Magnetic hybrid membranes based on ethylcellulose (EC), poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) and various magnetic praseodymium and neodymium powder microparticles as fillers were obtained. Permeability, diffusion and sorption coefficients of O{sub 2}, N{sub 2} and synthetic air components were estimated for homogeneous and heterogeneous membranes using the Time Lag method based on constant pressure permeation technique. The microstructure studies and the phase analysis of magnetic membranes were also performed using SEM and XRD. The influence of magnetic parameters, like coercivity, remanence and saturation magnetization of created membranes on the gas transport properties was studied. The results showed that their coercivity depended on composition and microstructure of the magnetic powder. On the other hand, remanence and saturation magnetization increased with the increase of the powder addition in the membrane. It was found that the magnetic membrane's gas transport properties were improved with the increase of membrane's remanence, saturation magnetization and magnetic particle filling. The decrease in powder particle size and associated increase of the membrane's coercivity also positively influenced the gas transport and separation properties of investigated membranes. It was observed that the magnetic ethylcellulose and poly(2,6-dimethyl-1,4-phenylene oxide) membranes had higher gas permeability, while their permselectivity and solubility coefficient values were rather maintained or slightly increased. The results also showed that the magnetic powder content enhanced significantly gas diffusivity in EC and PPO membranes. It was also analyzed the dependence of the drift coefficient w on the magnetic parameters of investigated membranes. The correlation between the membrane selectivity, permeability and magnetic properties with their XRD characteristics was stated. - Highlights: • Membrane's production consisting of EC or PPO

  1. On conveying and not conveying expertise.

    Science.gov (United States)

    Rappert, Brian; Coopmans, Catelijne

    2015-08-01

    This article attends to the movement between disclosing and non-disclosing in accounts of expertise. While referencing discussions about tacit knowledge ('experts know more than they can say') and the politics of non-disclosure ('withholding can help as well as harm the credibility of experts'), in the main it considers how experts move between conveying and not conveying in order to make their proficiencies recognized and accessible to others. The article examines this movement through a form that partakes in it, thus drawing attention to conventions and tensions in how authors make themselves accountable, and their subject matter available, to audiences. It thereby proposes to explore the possibilities of careful, and generative, non-disclosure as part of expert writing practices.

  2. A review of the hybrid techniques for the fabrication of hard magnetic microactuators based on bonded magnetic powders

    Science.gov (United States)

    Pallapa, M.; Yeow, J. T. W.

    2015-02-01

    Polymer composites based on permanent magnetic bonded powders exhibit immense potential for applications in microactuators and sensors with magnetic performances comparable to their fully dense counterparts. While fabrication and integration of magnetic devices based on bonded magnetic powders is challenging via conventional deposition and electrochemical growth techniques, hybrid fabrication offers a promising alternative. This paper presents the evolution of permanent magnetic materials into bonded magnetic powders, the magnetic performance figures of merit of permanent magnetic materials significant for the design and manufacture of polymer based sensors and actuators. A review of the hybrid fabrication techniques such as replica molding, squeegee coating, spin casting etc are reported. Critical factors affecting the fabrication of polymer magnetic composites such as filler particle size and effect of magnetic field during fabrication are discussed. Prior art based on polymer magnetic composites for the fabrication of hard magnetic films and hard magnetic actuators are presented.

  3. Conceptual Design of the 45 T Hybrid Magnet at the Nijmegen High Field Magnet Laboratory

    CERN Document Server

    Wiegers, SAJ; Bird, M D; Rook, J; Perenboom, J A A J; Wiegers, S A J; Bonito-Oliva, A; den Ouden, A

    2010-01-01

    A 45 T Hybrid Magnet System is being developed at the Nijmegen High Field Magnet Laboratory as part of the Nijmegen Center for Advanced Spectroscopy. The 45 T Hybrid Magnet System will be used in combination with far-infra-red light produced by a Free Electron Laser under construction directly adjacent to the High Field Magnet Laboratory. The superconducting outsert magnet will consist of three CICC coils wound on a single coil form, using Nb3Sn strands. A test program for strand and cable qualification is underway. The CICC will carry 13 kA and the coils will produce 12 T on axis field in a 600 mm warm bore. The nominal operating temperature will be 4.5 K maintained with forced-flow supercritical helium. The insert magnet will produce 33 T at 40 kA in a 32 mm bore consuming 20 MW, and will consist of four coils. The insert magnet will be galvanically and mechanically isolated from the outsert magnet. Complete system availability for users is expected in 2014. In this paper we will report on the conceptual de...

  4. Improvement of the rotational characteristics in the HTSC-permanent magnet hybrid bearing using ring shaped magnet

    Energy Technology Data Exchange (ETDEWEB)

    Emoto, Kozo; Sugiyama, Ryo; Takagi, Shogo; Ohashi, Shunsuke, E-mail: k145676@kansai-u.ac.jp

    2013-11-15

    Highlights: •We have developed the HTS-permanent magnet hybrid bearing system. •Three dimensional numerical analysis is undertaken to get the effective hybrid configuration. •Repulsive force and pinning force are combined effectively. •The hybrid system shows better levitation characteristics than the non-hybrid one. •In the mechanical resonance state, vibration of the rotor in the hybrid system is small. -- Abstract: We have developed the hybrid magnetic bearing using permanent magnets and the high-T{sub c} bulk superconductor (HTSC). Pinning force of the HTSC is used for the levitation and the guidance. Repulsive force of the permanent magnets is introduced to increase the load weight of the magnetic bearing. In this system, the stator side permanent magnet has the ring type structure so that both pinning force and repulsive force are used effectively. In this paper, influence of the hybrid system on dynamic characteristics of the rotor is studied. The rotor which is supported by the hybrid magnetic bearing is rotated. Then, vibration and the gradient angle of the rotor are measured until the rotor reaches to the end of the resonance state. Three dimensional numerical analysis of the flux which penetrates on the surface of the HTSC is undertaken. The relation between the dynamic characteristics and the flux is considered, and that of the hybrid system is compared with the non-hybrid one. In the hybrid system, the flux is changed by the influences of the stator side permanent magnet. Vibration and the gradient angle of the hybrid system are shown to be smaller than that of the non-hybrid one.

  5. 33. 6 T dc magnetic field produced in a hybrid magnet with Ho pole pieces

    Energy Technology Data Exchange (ETDEWEB)

    Rubin, L.G.; Brandt, B.L.; Weggel, R.J.; Foner, S.; McNiff E.J. Jr.

    1986-07-07

    A dc magnetic field of 33.6 +- 0.3 T was produced in a hybrid magnet whose central field was enhanced by a 3.5 T contribution from holmium pole pieces. The working (sample) volume was a 2-mm gap between the 19-mm-diam x 32-mm-long pole pieces tapered to 12-mm-diam faces. The magnetic field was measured with high-field/low-temperature Hall-effect sensors whose reproducibility and linearity made practical an extrapolation technique for fields above 30 T. Three superconducting samples with previously measured upper critical fields were used as calibration check points.

  6. Pixel hybrid photon detector magnetic distortions characterization and compensation

    CERN Document Server

    Aglieri-Rinella, G; D'Ambrosio, Carmelo; Forty, Roger W; Gys, Thierry; Patel, Mitesh; Piedigrossi, Didier; Van Lysebetten, Ann

    2004-01-01

    The LHCb experiment requires positive kaon identification in the momentum range 2-100 GeV/c. This is provided by two ring imaging Cherenkov detectors. The stringent requirements on the photon detectors are fully satisfied by the novel pixel hybrid photon detector, HPD. The HPD is a vacuum tube with a quartz window, S20 photo-cathode, cross-focusing electron optics and a silicon anode encapsulated within the tube. The anode is a 32*256 pixels hybrid detector, with a silicon sensor bump-bonded onto a readout chip containing 8192 channels with analogue front-end and digital read-out circuitry. An external magnetic field influences the trajectory of the photoelectrons and could thereby degrade the inherent excellent space resolution of the HPD. The HPDs must be operational in the fringe magnetic field of the LHCb magnet. This paper reports on an extensive experimental characterization of the distortion effects. The characterization has allowed the development of parameterisations and of a compensation algorithm. ...

  7. Hybrid Method for 3D Segmentation of Magnetic Resonance Images

    Institute of Scientific and Technical Information of China (English)

    ZHANGXiang; ZHANGDazhi; TIANJinwen; LIUJian

    2003-01-01

    Segmentation of some complex images, especially in magnetic resonance brain images, is often difficult to perform satisfactory results using only single approach of image segmentation. An approach towards the integration of several techniques seems to be the best solution. In this paper a new hybrid method for 3-dimension segmentation of the whole brain is introduced, based on fuzzy region growing, edge detection and mathematical morphology, The gray-level threshold, controlling the process of region growing, is determined by fuzzy technique. The image gradient feature is obtained by the 3-dimension sobel operator considering a 3×3×3 data block with the voxel to be evaluated at the center, while the gradient magnitude threshold is defined by the gradient magnitude histogram of brain magnetic resonance volume. By the combined methods of edge detection and region growing, the white matter volume of human brain is segmented perfectly. By the post-processing using mathematical morphological techniques, the whole brain region is obtained. In order to investigate the validity of the hybrid method, two comparative experiments, the region growing method using only gray-level feature and the thresholding method by combining gray-level and gradient features, are carried out. Experimental results indicate that the proposed method provides much better results than the traditional method using a single technique in the 3-dimension segmentation of human brain magnetic resonance data sets.

  8. A hybrid data acquisition system for magnetic measurements of accelerator magnets

    Energy Technology Data Exchange (ETDEWEB)

    Wang, X.; Hafalia, R.; Joseph, J.; Lizarazo, J.; Martchevsky, M.; Sabbi, G. L.

    2011-06-03

    A hybrid data acquisition system was developed for magnetic measurement of superconducting accelerator magnets at LBNL. It consists of a National Instruments dynamic signal acquisition (DSA) card and two Metrolab fast digital integrator (FDI) cards. The DSA card records the induced voltage signals from the rotating probe while the FDI cards records the flux increment integrated over a certain angular step. This allows the comparison of the measurements performed with two cards. In this note, the setup and test of the system is summarized. With a probe rotating at a speed of 0.5 Hz, the multipole coefficients of two magnets were measured with the hybrid system. The coefficients from the DSA and FDI cards agree with each other, indicating that the numerical integration of the raw voltage acquired by the DSA card is comparable to the performance of the FDI card in the current measurement setup.

  9. Improvement of the rotational characteristics in the HTSC-permanent magnet hybrid bearing using ring shaped magnet

    Science.gov (United States)

    Emoto, Kozo; Sugiyama, Ryo; Takagi, Shogo; Ohashi, Shunsuke

    2013-11-01

    We have developed the hybrid magnetic bearing using permanent magnets and the high-Tc bulk superconductor (HTSC). Pinning force of the HTSC is used for the levitation and the guidance. Repulsive force of the permanent magnets is introduced to increase the load weight of the magnetic bearing. In this system, the stator side permanent magnet has the ring type structure so that both pinning force and repulsive force are used effectively. In this paper, influence of the hybrid system on dynamic characteristics of the rotor is studied. The rotor which is supported by the hybrid magnetic bearing is rotated. Then, vibration and the gradient angle of the rotor are measured until the rotor reaches to the end of the resonance state. Three dimensional numerical analysis of the flux which penetrates on the surface of the HTSC is undertaken. The relation between the dynamic characteristics and the flux is considered, and that of the hybrid system is compared with the non-hybrid one. In the hybrid system, the flux is changed by the influences of the stator side permanent magnet. Vibration and the gradient angle of the hybrid system are shown to be smaller than that of the non-hybrid one.

  10. Improvement in field uniformity of the hybrid insert magnet

    Energy Technology Data Exchange (ETDEWEB)

    Asano, T; Yoshioka, H; Matsumoto, S; Kiyoshi, T [Tsukuba Magnet Laboratory, National Institute for Materials Science, Sakura 3-13, Tsukuba, Ibaraki 305-0003 (Japan)

    2006-11-15

    The hybrid magnet (HM) at the Tsukuba Magnet Laboratory (TML) generates 35 T in a 52-mm warm bore with a field uniformity of about 6500 ppm in a 10 mm diameter sphere volume (DSV). A new resistive insert magnet with the same bore was designed to provide the higher field uniformity in the HM operation and the construction was started. This e-magnet is composed of three concentric Bitter coils. The height of the outer coil is almost equal to that of present insert, . Tand the middle coil is made of a split-paired winding; . Tthe split gap is 53 mm. The A uniformity better than 10 ppm in a 10 mm DSV will be achieved at a themagnetic field of 34.0 T in a backup field of 14 T. This eimprovement in uniformity, in conjuncllaboration with the improvements of the DC power supply already in progress at the TML, will make it possible to expand the application fields of the HM of the TML.

  11. Preparation of Magnetic Hybrid Microspheres with Well-Defined Yolk-Shell Structure

    Directory of Open Access Journals (Sweden)

    Yuan Zhao

    2016-01-01

    Full Text Available A facile and efficient route was reported to prepare a kind of yolk-shell magnetic hybrid microspheres by suspension polymerization and calcinations method. The morphology, structure, and composition of the magnetic microspheres were characterized by FTIR, XRD, TEM, SEM, and TGA analysis. The vibrating-sample magnetometry (VSM results clearly showed that the magnetic particles were superparamagnetic with saturation magnetization of 32.82 emu/g which makes the microcomposites easily controlled by an external magnetic field. The results revealed that the magnetic hybrid microspheres might have important applications in magnetic bioseparation and drug delivery.

  12. A tubular hybrid Halbach/axially-magnetized permanent-magnet linear machine

    Directory of Open Access Journals (Sweden)

    Yi Sui

    2017-05-01

    Full Text Available A single-phase tubular permanent-magnet linear machine (PMLM with hybrid Halbach/axially-magnetized PM arrays is proposed for free-piston Stirling power generation system. Machine topology and operating principle are elaborately illustrated. With the sinusoidal speed characteristic of the free-piston Stirling engine considered, the proposed machine is designed and calculated by finite-element analysis (FEA. The main structural parameters, such as outer radius of the mover, radial length of both the axially-magnetized PMs and ferromagnetic poles, axial length of both the middle and end radially-magnetized PMs, etc., are optimized to improve both the force capability and power density. Compared with the conventional PMLMs, the proposed machine features high mass and volume power density, and has the advantages of simple control and low converter cost. The proposed machine topology is applicable to tubular PMLMs with any phases.

  13. A tubular hybrid Halbach/axially-magnetized permanent-magnet linear machine

    Science.gov (United States)

    Sui, Yi; Liu, Yong; Cheng, Luming; Liu, Jiaqi; Zheng, Ping

    2017-05-01

    A single-phase tubular permanent-magnet linear machine (PMLM) with hybrid Halbach/axially-magnetized PM arrays is proposed for free-piston Stirling power generation system. Machine topology and operating principle are elaborately illustrated. With the sinusoidal speed characteristic of the free-piston Stirling engine considered, the proposed machine is designed and calculated by finite-element analysis (FEA). The main structural parameters, such as outer radius of the mover, radial length of both the axially-magnetized PMs and ferromagnetic poles, axial length of both the middle and end radially-magnetized PMs, etc., are optimized to improve both the force capability and power density. Compared with the conventional PMLMs, the proposed machine features high mass and volume power density, and has the advantages of simple control and low converter cost. The proposed machine topology is applicable to tubular PMLMs with any phases.

  14. Hybrid magnetic – Semiconductor nanocomposites: optical, magnetic and nanosecond dynamical properties

    Energy Technology Data Exchange (ETDEWEB)

    Emam, A.N.; Girgis, E.; Mostafa, A.A. [National Research Center, Dokki, Giza (Egypt); Guirguis, O.W. [Biophysics Department, Faculty of Science, Cairo University, Giza (Egypt); Mohamed, M.B., E-mail: monabmohamed@gmail.com [National Institute of Laser Enhanced Science, Cairo University, Giza (Egypt); NanoTech Egypt for Photoelectronics, Dreamland, Giza (Egypt)

    2015-07-15

    A series of colloidal CdSe quantum dots doped with different concentration of cobalt ions has been prepared via organometallic pyrolysis of a mixture of cadmium stearate and cobalt dithiocarbazate. The conditions required for successful doping depend on the source of cobalt ions and the dopant concentration. The structure and morphology of the prepared nanocrystals have been characterized using X-Ray Diffraction (XRD), and Transmission Electron Microscope (TEM). Slight shift in the interplaner space was observed in the XRD pattern of the doped nanocrystals. Formation of separate cobalt nanoclusters has been observed in the TEM images upon increasing the cobalt concentration more than 2% of the original cadmium concentration. This was confirmed by magnetic measurements of the prepared samples. Room-temperature ferromagnetism has been observed, in which the switching field increases as the cobalt ratio increases. Increasing the cobalt ratio more than 5% increases the coercivity due to formation of Co{sup 0} nanoclusters. Moreover, the presence of localized magnetic ions in semiconductor QDs leads to strong exchange interactions between sp band electrons and the magnetic ions d electrons. This would influence the optical properties such as absorption, emission, as well as nanosecond relaxation dynamics. - Graphical abstract: Display Omitted - Highlights: • Hybrid semiconductor-magnetic nanostructure was prepared via chemical method. • Room-temperature ferromagnetism for hybrid CdSe–Co quantum dots has been observed. • Co{sup +2} ions induces slight shift in the interplaner space distance of the doped QDs. • Hybrid CdSe–Co QDs have better quantum yield than pure CdSe QDs. • Hybrid CdSe–Co nanocrystals have faster electron-hole dynamics than pure CdSe QDs.

  15. A Novel Integral 5-DOFs Hybrid Magnetic Bearing with One Permanent Magnet Ring Used for Turboexpander

    Directory of Open Access Journals (Sweden)

    Bangcheng Han

    2014-01-01

    Full Text Available We propose a novel combined five-degrees-of-freedom (5-DOFs hybrid magnetic bearing (HMB with only one permanent magnet ring (PMR used for turboexpanders. It has two radial magnetic bearing (RMB units; each has four poles and one thrust magnetic bearing (TMB to control 5-DOFs. Based on one PMR, the bias flux of the two radial magnetic bearing units and the one thrust magnetic bearing unit is constructed. As a result, ultra-high-speed, lower power loss, small size, and low cost can be achieved. Furthermore, the equivalent magnetic circuit method and 3D finite element method (FEM are used to model and analyze the combined 5-DOFs HMB. The force-current, force-position, torque-coil currents, the torque-angle position, and the stiffness models of the combined 5-DOFs HMB are given. Moreover, its coupling problems between the RMB units and the AMB unit are also proposed in this paper. An example is given to clarify the mathematical models and the coupling problems, and the linearized models are proposed for the follow-up controller design.

  16. Flywheel Energy Storage System Suspended by Hybrid Magnetic Bearing

    Science.gov (United States)

    Owusu-Ansah, Prince; Hu, Yefa; Misbawu, Adam

    This work presents a prototype flywheel energy storage system (FESS) suspended by hybrid magnetic bearing (HMB) rotating at a speed of 20000rpm with a maximum storage power capacity of 30W with a maximum tip speed of 300m/s. The design presented is an improvement of most existing FESS, as the design incorporates a unique feature in that the upper and the lower rotor and stator core are tapered which enhances larger thrust and much lower radial force to be exerted on the system. Without any adverse effect being experienced by the model. The work also focuses on the description of developing a prototype FESS suspended by HMB using solid works as a basis of developing in the nearer future a more improved FESS suspended by HMB capable of injecting the ever increasing high energy demand situation in the 21st century and beyond.

  17. Cryogenic Design of the 43 T LNCMI Grenoble Hybrid Magnet

    Science.gov (United States)

    Hervieu, B.; Berriaud, Ch.; Berthier, R.; Debray, F.; Fazilleau, Ph.; Manil, P.; Massinger, M.; Pfister, R.; Pugnat, P.; Ronayette, L.; Trophime, C.

    The association of two inner resistive coils (Polyhelix and Bitter) producing 34.5 T with an outer NbTi superconducting coil producing 8.5 T to obtain a 43 T hybrid magnet is a technical challenge. Accidental failure modes leading to complex electromagnetic behaviors and large transient dynamical forces should be anticipated. These considerations lead to a reinforced design and a thermo-hydraulic strategy to limit the overpressure. The cryostat has been designed with innovative thermo-mechanical supports sustaining the coil at 1.8 K-1200 hPa and the eddy current shield at 30 K, both being possibly overloaded by high dynamic forces in the worst accidental failure case.

  18. Hybrid Magnetic Core-Shell Nanophotocatalysts for Environmental Applications

    Energy Technology Data Exchange (ETDEWEB)

    Gaulden, Patrick [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Murph, Simona Hunyadi [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Univ. of Georgia, Athens, GA (United States). Dept. of Physics and Astronomy

    2016-07-29

    This research study describes a facile sol-gel method to creating hybrid iron (III) oxide/silica/titania nanomaterials decorated with gold nanoparticles for use in environmental applications. The multi-functional composition of the nanomaterials allows for photocatalyzed reactions to occur in both the visible and the UV range. The morphologies, elemental composition, and surface charge of the nanoparticles were determined by Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), and Phase Analysis Light Scattering (PALS), respectively. The photocatalytic activity of the synthesized hybrid nanoparticles for breaking down a model analyte, methyl orange (MO), was then evaluated using UV-Vis Spectroscopy. The efficiency of the photocatalyst under UV light irradiation was measured and compared to other well-studied nanophotocatalysts, namely titanium oxide and iron oxide nanoparticles. The concentration dependence of both the photocatalyst and the analyte was also investigated. By utilizing the known UV-active properties of TiO2, the magnetic properties of Fe2O3, the optical properties of gold in the visible range of the spectrum, and the high stability of silica, a novel, highly efficient photocatalyst that is active on a broad range of the spectrum (UV-Vis) can be created to destroy organic pollutants in wastewater streams.

  19. Classification of magnetic inhomogeneities and 0 -π transitions in superconducting-magnetic hybrid structures

    Science.gov (United States)

    Baker, Thomas E.; Richie-Halford, Adam; Bill, Andreas

    2016-09-01

    We present a comparative study of pair correlations and currents through superconducting-magnetic hybrid systems with a particular emphasis on the tunable Bloch domain wall of an exchange spring. This study of the Gor'kov functions contrasts magnetic systems with domain walls that change at discrete points in the magnetic region with those that change continuously throughout. We present results for misaligned homogeneous magnetic multilayers, including spin valves, for discrete domain walls, as well as exchange springs and helical domain walls—such as Holmium—for the continuous case. Introducing a rotating basis to disentangle the role of singlet and triplet correlations, we demonstrate that substantial amounts of (so-called short-range) singlet correlations are generated throughout the magnetic system in a continuous domain wall via the cascade effect. We propose a classification of 0 -π transitions of the Josephson current into three types, according to the predominant pair correlations symmetries involved in the current. Properties of exchange springs for an experimental study of the proposed effects are discussed. The interplay between components of the Gor'kov function that are parallel and perpendicular to the local magnetization lead to a novel prediction about their role in a proximity system with a progressively twisting helix that is experimentally measurable.

  20. Recent Advances of Graphene-based Hybrids with Magnetic Nanoparticles for Biomedical Applications.

    Science.gov (United States)

    Alegret, Nuria; Criado, Alejandro; Prato, Maurizio

    2017-01-01

    The utilization of graphene-based nanomaterials combined with magnetic nanoparticles offers key benefits in the modern biomedicine. In this minireview, we focus on the most recent advances in hybrids of magnetic graphene derivatives for biomedical applications. We initially analyze the several methodologies employed for the preparation of graphene-based composites with magnetic nanoparticles, more specifically the kind of linkage between the two components. In the last section, we focus on the biomedical applications where these magnetic-graphene hybrids are essential and pay special attention on how the addition of graphene improves the resulting devices in magnetic resonance imaging, controlled drug delivery, magnetic photothermal therapy and cellular separation and isolation. Finally, we highlight the use of these magnetic hybrids as multifunctional material that will lead to a next generation of theranostics. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  1. Anisotropic Thermal Properties of Nanostructured Magnetic, Carbon and Hybrid Magnetic - Carbon Materials

    Science.gov (United States)

    Ramirez, Sylvester

    In this dissertation research we investigated thermal properties of three groups of nanostructured materials: (i) magnetic; (ii) reduced graphene oxide films; and (iii) hybrid magnetic -- graphite -- graphene composites. The thermal measurements were conducted using the transient "hot disk" and "laser flash" techniques. The rare-earth free nanostructured SrFe12O19 permanent magnets were produced by the current activated pressure assisted densification technique. The thermal conductivity of the nanostructured bulk magnets was found to range from 3.8 to 5.6 W/mK for the in-plane and 2.36 W/mk to 2.65 W/mK for the cross-plane directions, respectively. The heat conduction was dominated by phonons near the room temperature. The anisotropy of heat conduction was explained by the brick-like alignment of crystalline grains with the longer grain size in-plane direction. The thermal conductivity scales up with the average grain size and mass density of the material revealing weak temperature dependence. Using the nanostructured ferromagnetic Fe3O4 composites as an example system, we incorporated graphene and graphite fillers into magnetic material without changing their morphology. It was demonstrated that addition of 5 wt. % of equal mixture of graphene and graphite flakes to the composite results in a factor of x2.6 enhancement of the thermal conductivity without significant degradation of the saturation magnetization. We investigated thermal conductivity of free-standing reduced graphene oxide films subjected to a high-temperature treatment of up to 1000°C. It was found that the high-temperature annealing dramatically increased the in-plane thermal conductivity, K, of the films from ˜3 W/mK to ˜61 W/mK at room temperature. The cross-plane thermal conductivity, K⊥, revealed an interesting opposite trend of decreasing to a very small value of ˜0.09 W/mK in the reduced graphene oxide films annealed at 1000°C. The obtained films demonstrated an exceptionally strong

  2. Hybrid magnet devices for molecule manipulation and small scale high gradient-field applications

    Science.gov (United States)

    Humphries, David E.; Hong, Seok-Cheol; Cozzarelli, legal representative, Linda A.; Pollard, Martin J.; Cozzarelli, Nicholas R.

    2009-01-06

    The present disclosure provides a high performance hybrid magnetic structure made from a combination of permanent magnets and ferromagnetic pole materials which are assembled in a predetermined array. The hybrid magnetic structure provides means for separation and other biotechnology applications involving holding, manipulation, or separation of magnetizable molecular structures and targets. Also disclosed are hybrid magnetic tweezers able to exert approximately 1 nN of force to 4.5 .mu.m magnetic bead. The maximum force was experimentally measured to be .about.900 pN which is in good agreement with theoretical estimations and other measurements. In addition, a new analysis scheme that permits fast real-time position measurement in typical geometry of magnetic tweezers has been developed and described in detail.

  3. Green synthetic, multifunctional hybrid micelles with shell embedded magnetic nanoparticles for theranostic applications.

    Science.gov (United States)

    Li, Yongyong; Ma, Junping; Zhu, Haiyan; Gao, Xiaolong; Dong, Haiqing; Shi, Donglu

    2013-08-14

    The objective of this study is to design and develop a green-synthetic, multifunctional hybrid micelles with shell embedded magnetic nanoparticles for theranostic applications. The hybrid micelles were engineered based on complex micelles self-assembled from amphiphilic block copolymers Pluronic F127 and peptide-amphiphile (PA) pal-AAAAHHHD. The reason to choose PA is due to its amphiphilic character and the coordination capability for Fe(3+) and Fe(2+). The PA incorporation allows the in situ growth of the magnetic iron oxide nanoparticles onto the complex micelles, to yield the nanostructures with shell embedded magnetic nanoparticles at an ambient condition without any organic solvents. The anticancer drug doxorubicin (DOX) can be efficiently loaded into the hybrid micelles. Interestingly, the magnetic nanoparticles anchored on the shell were found to significantly retard the DOX release behavior of the drug loaded hybrid micelles. It was proposed that a cross-linking effect of the shell by magnetic nanoparticles is a key to underlie the above intriguing phenomenon, which could enhance the stability and control the drug diffusion of the hybrid micelles. Importantly, in vitro and in vivo magnetic resonance imaging (MRI) revealed the potential of these hybrid micelles to be served as a T2-weighted MR imaging contrast enhancer for clinical diagnosis.

  4. Shape-controlled fabrication of magnetite silver hybrid nanoparticles with high performance magnetic hyperthermia.

    Science.gov (United States)

    Ding, Qi; Liu, Dongfang; Guo, Dawei; Yang, Fang; Pang, Xingyun; Che, Renchao; Zhou, Naizhen; Xie, Jun; Sun, Jianfei; Huang, Zhihai; Gu, Ning

    2017-04-01

    Superparamagnetic Fe3O4 nanoparticles (NPs)-based hyperthermia is a promising non-invasive approach for cancer therapy. However, the heat transfer efficiency of Fe3O4 NPs is relative low, which hinders their practical clinical applications. Therefore, it is promising to improve the magnetic hyperthermia efficiency by exploring the higher performance magnetic NPs-based hybrid nanostructures. In the current study, it presents a straightforward in situ reduction method for the shape-controlled preparation of magnetite (Fe3O4) silver (Ag) hybrid NPs designed as magnetic hyperthermia heat mediators. The magnetite silver hybrid NPs with core-shell (Fe3O4@Ag) or heteromer (Fe3O4-Ag) structures exhibited a higher biocompatibility with SMMC-7721 cells and L02 cells than the individual Ag NPs. Importantly, in the magnetic hyperthermia, with the exposure to alternating current magnetic field, the Fe3O4@Ag and Fe3O4-Ag hybrid NPs indicated much better tumor suppression effect against SMMC-7721 cells than the individual Fe3O4 NPs in vitro and in vivo. These results demonstrate that the hybridisation of Fe3O4 and Ag NPs could greatly enhance the magnetic hyperthermia efficiency of Fe3O4 NPs. Therefore, the Fe3O4@Ag and Fe3O4-Ag hybrid NPs can be used to be as high performance magnetic hyperthermia mediators based on a simple and effective preparation approach.

  5. Effect of the repulsive force in the HTSC-permanent magnet hybrid bearing system

    Energy Technology Data Exchange (ETDEWEB)

    Ohashi, S., E-mail: ohashi@ipcku.kansai-u.ac.j [Kansai University, 3-3-35, Yamate-cho, Suita, Osaka 564-8680 (Japan); Kobayashi, S. [Kansai University, 3-3-35, Yamate-cho, Suita, Osaka 564-8680 (Japan)

    2009-10-15

    Magnetic levitation using the pinning force of the YBaCuO high-T{sub c} bulk superconductor (HTSC) materials has an advantage to achieve stable levitation without control. To increase levitation force, the HTSC-permanent magnet hybrid magnetic bearing system is introduced. A circular shaped three phase Nd-Fe-B permanent magnet is installed on the rotor, and HTSC bulk superconductor is set on the stator. The additional permanent magnet is installed under the HTSC. Repulsive force of the permanent magnet is used for levitation, and pinning force between the HTSC and permanent magnet is used for guidance force of the bearing. In this system, relationship between permanent magnet and the HTSC is important. When repulsive force of the permanent magnet is large, pinning force of superconductor is used to keep the rotor position. As a result, stability for the lateral direction is decreased with hybrid system. For levitation force, effect of the hybrid system is not observed with column HTSC. Compared with the ring HTSC results, the following thing is considered. Because there is no space that flux of one permanent magnet acts on the other one with the column HTSC configuration, interaction between two permanent magnets becomes small.

  6. Effect of the repulsive force in the HTSC-permanent magnet hybrid bearing system

    Science.gov (United States)

    Ohashi, S.; Kobayashi, S.

    2009-10-01

    Magnetic levitation using the pinning force of the YBaCuO high- Tc bulk superconductor (HTSC) materials has an advantage to achieve stable levitation without control. To increase levitation force, the HTSC-permanent magnet hybrid magnetic bearing system is introduced. A circular shaped three phase Nd-Fe-B permanent magnet is installed on the rotor, and HTSC bulk superconductor is set on the stator. The additional permanent magnet is installed under the HTSC. Repulsive force of the permanent magnet is used for levitation, and pinning force between the HTSC and permanent magnet is used for guidance force of the bearing. In this system, relationship between permanent magnet and the HTSC is important. When repulsive force of the permanent magnet is large, pinning force of superconductor is used to keep the rotor position. As a result, stability for the lateral direction is decreased with hybrid system. For levitation force, effect of the hybrid system is not observed with column HTSC. Compared with the ring HTSC results, the following thing is considered. Because there is no space that flux of one permanent magnet acts on the other one with the column HTSC configuration, interaction between two permanent magnets becomes small.

  7. Design of a cryocooler-cooled magnet for a compact hybrid magnet; Konpakuto haiburiddo magunetto yo reitoki reikyaku chodendo magunetto no gainen sekkei

    Energy Technology Data Exchange (ETDEWEB)

    Asano, T. [National Research Inst. for Metals, Tokyo (Japan); Koyanagi, K.; Matsumoto, S.; Kiyoshi, T.; Wada, H. [National Research Inst. for Metals, Tokyo (Japan); Japan Science and Technology Corpration, Saitama (Japan)

    1999-11-10

    In Natl. Res. Inst. for Metals, we examine the possibility of the operation of the hybrid magnet which combined refrigerating machine conduction cooling style superconducting magnet of the large diameter with the water-cooling copper magnet. The examination of the stability considering the electromagnetic interaction with the water-cooling copper magnet is required so that the conduction-cooling magnet may be made to run as a superconducting magnet for the hybrid magnet. In this report, the result of making on the magnet considering thermal load and coil protection to refrigerating machine conceptual design is described. (NEDO)

  8. Electromagnetic Forces in a Hybrid Magnetic-Bearing Switched-Reluctance Motor

    Science.gov (United States)

    Morrison, Carlos R.; Siebert, Mark W.; Ho, Eric J.

    2008-01-01

    Analysis and experimental measurement of the electromagnetic force loads on the hybrid rotor in a novel hybrid magnetic-bearing switched-reluctance motor (MBSRM) have been performed. A MBSRM has the combined characteristics of a switched-reluctance motor and a magnetic bearing. The MBSRM discussed in this report has an eight-pole stator and a six-pole hybrid rotor, which is composed of circular and scalloped lamination segments. The hybrid rotor is levitated using only one set of four stator poles, while a second set of four stator poles imparts torque to the scalloped portion of the rotor, which is driven in a traditional switched reluctance manner by a processor. Static torque and radial force analysis were done for rotor poles that were oriented to achieve maximum and minimum radial force loads on the rotor. The objective is to assess whether simple one-dimensional magnetic circuit analysis is sufficient for preliminary evaluation of this machine, which may exhibit strong three-dimensional electromagnetic field behavior. Two magnetic circuit geometries, approximating the complex topology of the magnetic fields in and around the hybrid rotor, were employed in formulating the electromagnetic radial force equations. Reasonable agreement between the experimental and the theoretical radial force loads predictions was obtained with typical magnetic bearing derating factors applied to the predictions.

  9. Magnetic-field-mediated coupling and control in hybrid atomic-nanomechanical systems

    CERN Document Server

    Tretiakov, A

    2016-01-01

    Magnetically coupled hybrid quantum systems enable robust quantum state control through Landau-Zener transitions. Here, we show that an ultracold atomic sample coupled to a nanomechanical resonator via oscillating magnetic fields can be used to cool the resonator's mechanical motion, to measure the mechanical temperature, and to enable entanglement of these mesoscopic objects. We calculate the expected coupling for both permanent-magnet and current-conducting nanostring resonators and describe how this hybridization is attainable using recently developed fabrication techniques, including SiN nanostrings and atom chips.

  10. Hybrid R-Fe-B/R-Co Magnets with Improved Thermal Stability

    Science.gov (United States)

    2009-12-23

    known that Nd2Fe14B -based magnets display excellent room temperature magnetic performance with (BH)max up to 50 MGOe. However, their low Curie... Nd2Fe14B - and Sm2Co17-based permanent magnets. This temperature range covers the exact temperatures that are very critical for many important...make a hybrid Nd2Fe14B /Sm2(Co,Fe,Cu,Zr)17 magnet that may combine the high magnetic performance of Nd2Fe14B and excellent high temperature stability

  11. Two-dimensional magnetic modeling of ferromagnetic materials by using a neural networks based hybrid approach

    Energy Technology Data Exchange (ETDEWEB)

    Cardelli, E.; Faba, A. [Department of Engineering, University of Perugia, Via G. Duranti 93, 06125 Perugia (Italy); Laudani, A.; Lozito, G.M.; Riganti Fulginei, F.; Salvini, A. [Department of Engineering, Roma Tre University, Via V. Volterra 62, 00146 Rome (Italy)

    2016-04-01

    This paper presents a hybrid neural network approach to model magnetic hysteresis at macro-magnetic scale. That approach aims to be coupled together with numerical treatments of magnetic hysteresis such as FEM numerical solvers of the Maxwell's equations in time domain, as in case of the non-linear dynamic analysis of electrical machines, and other similar devices, allowing a complete computer simulation with acceptable run times. The proposed Hybrid Neural System consists of four inputs representing the magnetic induction and magnetic field components at each time step and it is trained by 2D and scalar measurements performed on the magnetic material to be modeled. The magnetic induction B is assumed as entry point and the output of the Hybrid Neural System returns the predicted value of the field H at the same time step. Within the Hybrid Neural System, a suitably trained neural network is used for predicting the hysteretic behavior of the material to be modeled. Validations with experimental tests and simulations for symmetric, non-symmetric and minor loops are presented.

  12. Antimagnets: controlling magnetic fields with superconductor-metamaterial hybrids

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, Alvaro; Navau, Carles; Prat-Camps, Jordi; Chen Duxing, E-mail: alvar.sanchez@uab.cat [Grup d' Electromagnetisme, Departament de Fisica, Universitat Autonoma de Barcelona, 08193 Bellaterra, Barcelona, Catalonia (Spain)

    2011-09-15

    Magnetism is very important in various areas of science and technology, ranging from magnetic recording through energy generation to trapping cold atoms. Physicists have managed to master magnetism-to create and manipulate magnetic fields-almost at will. Surprisingly, there is at least one property that has been elusive until now: how to 'switch off' the magnetic interaction of a magnetic material with existing magnetic fields without modifying them. Here we introduce the antimagnet, a design that conceals the magnetic response of a given volume from its exterior, without altering the external magnetic fields, in some respects analogous to recent theoretical proposals for cloaking electromagnetic waves with metamaterials. However, unlike these devices, which require extreme material properties, our device is feasible and needs only two kinds of available materials: superconductors and isotropic magnetic materials. Antimagnets may have applications in magnetic-based medical techniques such as magnetic resonance imaging or in reducing the magnetic signature of vessels or planes.

  13. A modified Rogowski coil for measurements of hybrid permanent magnets

    Energy Technology Data Exchange (ETDEWEB)

    Bertsche, K.

    1996-08-01

    For large permanent magnets, as proposed for the Fermilab Recycler Ring, it may be important to quickly verify that the magnet`s strength is correct. This may be important, for example, if a magnet is suspected of having changed due to some sort of accident. The field strength of a pure dipole can be readily measured with a Hall probe, but for indexed dipoles and for quadrupoles a Hall probe will not give very accurate results without precise positioning. We have investigated a different approach, the use of a modified Rogowski coil to measure the magnetic potential of each pole. As long as magnet geometry is fixed and known, measurement of the magnetic potential at each pole gives a good measurement of field strength even for magnets with large quadrupole components. The construction and use of such a coil and the precision of measurements made with it will be discussed. 4 refs., 5 figs.

  14. Using NV centers to probe magnetization dynamics in normal metal/magnetic insulator hybrid system at the nanoscale

    Science.gov (United States)

    Zhang, Huiliang; Ku, Mark J. H.; Han, Minyong; Casola, Francesco; van der Sar, Toeno; Yacoby, Amir; Walsworth, Ronald L.

    2016-05-01

    Understanding magnetization dynamics induced by electric current is of great interest for both fundamental and practical reasons. Great endeavor has been dedicated to spin-orbit torques (SOT) in metallic structures, while quantitative study of analogous phenomena in magnetic insulators remains challenging where transport measurements are not feasible. Recently we have developed techniques using nitrogen vacancy (NV) centers in diamond to probe few-nanometre-scale correlated-electron magnetic excitations (i.e., spin waves). Here we demonstrate how this powerful tool can be implemented to study magnetization dynamics inside ferromagnetic insulator, Yttrium iron garnet (YIG) with spin injection from electrical current through normal metal (Platinum in our case). Particularly our work will focus on NV magnetic detection, imaging, and spectroscopy of coherent auto-oscillations in Pt/YIG microdisc. Magnetic fluctuations and local temperature measurements, both with nearby NV centers, will also be interesting topics relevant to SOT physics in Pt/YIG hybrid system.

  15. Nonvolatile, reversible electric-field controlled switching of remanent magnetization in multifunctional ferromagnetic/ferroelectric hybrids

    Science.gov (United States)

    Brandlmaier, A.; Geprägs, S.; Woltersdorf, G.; Gross, R.; Goennenwein, S. T. B.

    2011-08-01

    In spin-mechanics, the magnetoelastic coupling in ferromagnetic/ferroelectric hybrid devices is exploited in order to realize an electric-voltage control of magnetization orientation. To this end, different voltage-induced elastic strain states are used to generate different magnetization orientations. In our approach, we take advantage of the hysteretic expansion and contraction of a commercial piezoelectric actuator as a function of electrical voltage to deterministically select one of two electro-remanent elastic strain states. We investigate the resulting magnetic response in a nickel thin film/piezoelectric actuator hybrid device at room temperature, using simultaneous magneto-optical Kerr effect and magnetotransport measurements. The magnetic properties of the hybrid can be consistently described in a macrospin model, i.e., in terms of a single magnetic domain. At zero external magnetic field, the magnetization orientation in the two electro-remanent strain states differs by 15°, which corresponds to a magnetoresistance change of 0.5%. These results demonstrate that the spin-mechanics scheme indeed enables a nonvolatile electrically read- and writable memory bit where the information is encoded in a magnetic property.

  16. Numerical investigation of magnetic sensor for DNA hybridization detection using planar transformer

    Directory of Open Access Journals (Sweden)

    Sayyed M. Azimi

    2007-12-01

    Full Text Available This paper introduces a sensor for detection of DNA hybridization and investigates its performance by means of computer simulation. A planar transformer with spiral windings is proposed for hybridization detection. In order to detect the occurrence of hybridization, single strand target DNA’s are tagged with magnetic beads. Target DNA’s are then exposed to known single strand probe DNA’s which are immobilized on the surface of a functionalized layer in the proximity of the sensor. The primary winding of the transformer is driven by an AC current source. The voltage at the secondary winding is used for detection. Once the hybridization is occurred, a layer of magnetic material is formed and the coupling between the windings is varied. These variations are reflected into the detecting output voltage. The magnitude of the output voltage is numerically calculated in terms of geometrical and physical parameters and the parameter values resulting in maximum response are derived.

  17. A Magnetic Flux Leakage and Magnetostrictive Guided Wave Hybrid Transducer for Detecting Bridge Cables

    Directory of Open Access Journals (Sweden)

    Jiang Xu

    2012-01-01

    Full Text Available Condition assessment of cables has gained considerable attention for the bridge safety. A magnetic flux leakage and magnetostrictive guided wave hybrid transducer is provided to inspect bridge cables. The similarities and differences between the two methods are investigated. The hybrid transducer for bridge cables consists of an aluminum framework, climbing modules, embedded magnetizers and a ribbon coil. The static axial magnetic field provided by the magnetizers meets the needs of the magnetic flux leakage testing and the magnetostrictive guided wave testing. The magnetizers also provide the attraction for the climbing modules. In the magnetic flux leakage testing for the free length of cable, the coil induces the axial leakage magnetic field. In the magnetostrictive guided wave testing for the anchorage zone, the coil provides a pulse high power variational magnetic field for generating guided waves; the coil induces the magnetic field variation for receiving guided waves. The experimental results show that the transducer with the corresponding inspection system could be applied to detect the broken wires in the free length and in the anchorage zone of bridge cables.

  18. Hybrid nanomaterials: anchoring magnetic molecules on naked gold nanocrystals.

    Science.gov (United States)

    Holmberg, Rebecca J; Hutchings, Amy-Jayne; Habib, Fatemah; Korobkov, Ilia; Scaiano, Juan C; Murugesu, Muralee

    2013-12-16

    The pairing of molecular magnets and nanomaterials couples top-down and bottom-up approaches to nanotechnology; facilitating a unique methodology to the controlled study of interfacial magnetic properties. Attaching Single-Molecule Magnets (SMMs) to "naked" gold nanoparticles is a novel method of exploring various avenues of magnetic nanotechnology, such as drug delivery, information storage, catalysis, and assembly of magnetic-nanostructural motifs. Herein we report the successful capping of laser ablation synthesized "naked" gold nanoparticles with a dinuclear dysprosium complex, while introducing new information regarding the changes in molecular magnetic properties upon surface attachment. We anticipate that this methodology in producing these magneto-plasmonic nanostructures not only provides answers to fundamental questions but also has the potential to provide new avenues to applications including information storage, multimodal imaging, biomedicine, and optoelectronics.

  19. Adsorption mechanism of magnetically separable Fe{sub 3}O{sub 4}/graphene oxide hybrids

    Energy Technology Data Exchange (ETDEWEB)

    Ouyang, Ke [Department of Chemical and Environment Engineering, Wuyi University, Jiangmen, Guangdong 529020 (China); Zhu, Chuanhe [Department of Civil, Construction and Environmental Engineering, Department of Chemical and Biological Engineering, Iowa State University, Ames, IA 50011 (United States); Zhao, Ya; Wang, Leichao [Department of Chemical and Environment Engineering, Wuyi University, Jiangmen, Guangdong 529020 (China); Xie, Shan, E-mail: wyuchemxs@126.com [Department of Chemical and Environment Engineering, Wuyi University, Jiangmen, Guangdong 529020 (China); Wang, Qun, E-mail: qunwang@iastate.edu [Department of Civil, Construction and Environmental Engineering, Department of Chemical and Biological Engineering, Iowa State University, Ames, IA 50011 (United States)

    2015-11-15

    Graphical abstract: A recyclable Fe{sub 3}O{sub 4}/graphene oxide (GO) magnetic hybrid was successfully synthesized via a facile one-pot polylol approach and exhibited an effective adsorption of BPA in aqueous solution. - Highlights: • Magnetically separable Fe{sub 3}O{sub 4}/GO hybrids were synthesized via a facile one-pot polylol approach. • The Fe{sub 3}O{sub 4}/GO hybrid could be easily recovered and met the need of magnetic separation, exhibiting excellent reproducibility and reusability. • The hybrids showed excellent adsorption ability for bisphenol A in aqueous solution. • The effect of pH value, temperature and coexisting ions on the adsorption was studied. • π–π interactions were postulated to be the primary mechanisms of adsorption of BPA on Fe{sub 3}O{sub 4}/GO hybrids. - Abstract: A reclaimable Fe{sub 3}O{sub 4}/graphene oxide (GO) magnetic hybrid was successfully synthesized via a facile one-pot polyol approach and employed as a recyclable adsorbent for Bisphenol A (BPA) in aqueous solutions. The maximum adsorption capacity (q{sub m}) of the Fe{sub 3}O{sub 4}/GO hybrid for BPA was 72.80 mg/g at 273 K. The kinetics of the adsorption process and the adsorption isotherm data were fitted using the Freundlich equation and a pseudo-second-order kinetic model. The results of the thermodynamic parameters ΔH°, ΔS° and ΔG° showed that the adsorption process was exothermic and spontaneous. Furthermore, the reusability of the samples was investigated, and the results indicated that the samples exhibited high stability. The magnetic characterization demonstrated that hybrids were superparamagnetic and could be recovered conveniently by magnetic separation. The strong π–π interaction was determined to be the predominant driving force behind the adsorption of BPA onto the Fe{sub 3}O{sub 4}/GO hybrid. Therefore, the Fe{sub 3}O{sub 4}/GO hybrid could be regarded as a potential adsorbent for wastewater treatment and purification processes.

  20. Synthesis of Ni-Au-ZnO ternary magnetic hybrid nanocrystals with enhanced photocatalytic activity.

    Science.gov (United States)

    Zeng, Deqian; Chen, Yuanzhi; Wang, Zhichao; Wang, Junbao; Xie, Qingshui; Peng, Dong-Liang

    2015-07-14

    The functional synergy between the metal and the semiconductor in metal-semiconductor hybrid nanocrystals with specific structures and morphologies makes them suitable candidates for a wide range of applications. To date, the synthesis and the corresponding properties of ternary metal-semiconductor hetero-nanostructures, especially for hybrid nanocrystals containing magnetic metals, are seldom discussed and thus worthy of extensive research. In this study, we report a nonaqueous approach for the synthesis of Ni-Au-ZnO ternary hybrid nanocrystals with three morphologies, including nanomultipods, matchstick-like nanorods and nanopyramids. In the synthetic strategy, the Ni precursor dissolved in oleylamine was injected into a hot solution containing preformed Au-ZnO nanocrystals with specific morphologies. Then Ni prefers to grow on the unoccupied surfaces of Au, thus forming a hybrid hetero-nanostructure which retains the main morphologies of Au-ZnO nanocrystals. The ultraviolet-visible spectra not only show the band gap absorption of ZnO but also exhibit a broadened and weakened surface plasmon resonance (SPR) band of Au. The Ni-Au-ZnO nanocrystals exhibit much higher photocatalytic efficiency than pure ZnO in the degradation of Rhodamine B. Meanwhile, these hybrid nanocrystals are superparamagnetic at room temperature and can be readily recycled by a magnetic field for reuse. The as-prepared ternary Ni-Au-ZnO hybrid nanocrystals possess plasmonic, magnetic and enhanced photocatalytic properties, and thus are expected to find wide applications in the future.

  1. Design and Analysis of the AlNiCo Hybrid Magnet in EMS Maglev Vehicles

    Directory of Open Access Journals (Sweden)

    Lv Chao

    2017-01-01

    Full Text Available In order to solve the problem of hybrid electromagnet lock orbit, we design a new type of AlNiCo-NdFeB hybrid levitation electromagnet. The theoretical analysis has be carried on and mathematical model is established for AlNiCo-NdFeB hybrid levitation electromagnet. Through two dimensional simulation, the electromagnetic characteristics of the suspended electromagnet are analyzed in the 3 typical operating conditions , which are in heavy load at gap 8mm, in full load at gap 16mm and in no-load at gap 3mm. And it’s compared with the traditional electromagnetic magnet and NdFeB hybrid electromagnet. Calculation and analysis show that the new hybrid levitation electromagnet can effectively solve the problems of the electromagnet lock orbit, at the same time, have a good dynamic performance and suspension regulation performance.

  2. Inducing transparency with large magnetic response and group indices by hybrid dielectric metamaterials.

    Science.gov (United States)

    Chen, Cheng-Kuang; Lai, Yueh-Chun; Yang, Yu-Hang; Chen, Chia-Yun; Yen, Ta-Jen

    2012-03-26

    We present metamaterial-induced transparency (MIT) phenomena with enhanced magnetic fields in hybrid dielectric metamaterials. Using two hybrid structures of identical-dielectric-constant resonators (IDRs) and distinct-dielectric-constant resonators (DDRs), we demonstrate a larger group index (ng~354), better bandwidth-delay product (BDP~0.9) than metallic-type metamaterials. The keys to enable these properties are to excite either the trapped mode or the suppressed mode resonances, which can be managed by controlling the contrast of dielectric constants between the dielectric resonators in the hybrid metamaterials.

  3. Design of magnetic akaganeite-cyanobacteria hybrid biofilms

    Energy Technology Data Exchange (ETDEWEB)

    Dahoumane, Si Amar [Universite Paris Diderot (Paris 7), CNRS, UMR 7086, Interfaces, Traitements, Organisation et Dynamique des Systemes (ITODYS), 15 rue Jean de Baif, F-75205 Paris Cedex 13 (France); Djediat, Chakib; Yepremian, Claude; Coute, Alain [Museum National d' Histoire Naturelle (MNHN), Departement RDDM, USM 505, 57 rue Cuvier, F-75005 Paris (France); Fievet, Fernand [Universite Paris Diderot (Paris 7), CNRS, UMR 7086, Interfaces, Traitements, Organisation et Dynamique des Systemes (ITODYS), 15 rue Jean de Baif, F-75205 Paris Cedex 13 (France); Brayner, Roberta, E-mail: roberta.brayner@univ-paris-diderot.f [Universite Paris Diderot (Paris 7), CNRS, UMR 7086, Interfaces, Traitements, Organisation et Dynamique des Systemes (ITODYS), 15 rue Jean de Baif, F-75205 Paris Cedex 13 (France)

    2010-07-30

    Common Anabaena cyanobacteria are shown to form intra-cellularly akaganeite {beta}-FeOOH nanorods of well-controlled size and unusual morphology at room temperature. High-resolution transmission electron microscopy showed that these nanorods present a complex arrangement of pores forming a spongelike structure. These hybrid akaganeite-cyanobacteria were used to form 'one-pot' hybrid biofilms. The hybrid biofilm presents higher coercivity (H{sub c} = 44.6 kA m{sup -1} (560 Oe)) when compared to lyophilized akaganeite-cyanobacteria powder (H{sub c} = 0.8 kA m{sup -1} (10 Oe)) due to the quasi-assembly of the cells on the glass substrate compared to the lyophilized randomly akaganeite-cyanobacteria powder.

  4. A close-up of the lower part of a 13 kA current lead. The high-temperature superconductor (on the left in the photo) with the low-temperature superconductor (on the right). Resting in liquid helium, the low-temperature superconductor is connected to the bus-bars conveying the current to the LHC magnets.

    CERN Multimedia

    2004-01-01

    A close-up of the lower part of a 13 kA current lead. The high-temperature superconductor (on the left in the photo) with the low-temperature superconductor (on the right). Resting in liquid helium, the low-temperature superconductor is connected to the bus-bars conveying the current to the LHC magnets.

  5. Development of an extraction type magnetometer under low temperature and high magnetic fields over 20 T by the hybrid magnet

    Energy Technology Data Exchange (ETDEWEB)

    Koyama, K; Sakakura, R; Watanabe, K [High Field Laboratory for Superconducting materials, Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan)], E-mail: kkoyama@imr.tohoku.ac.jp

    2009-03-01

    An extraction-type magnetometer has been developed, which is performed under the low temperature of 0.5-0.6 K using a {sup 3}He-refrigerator and high magnetic fields up to 18 T using a superconducting magnet (SM) and 27 T using a hybrid magnet (HM). Magnetization curves can be measured with the absolute value over 0.0005 emu using SM and 0.005 emu using HM. We confirmed that the resolution is 0.001 emu for SM and 0.005 emu for HM. For demonstrating the ability of the magnetometer, high field magnetization curves of NdO{sub 4}Ag in 0.6-4.2 K are presented.

  6. Fabrication of Magnetic-Antimicrobial-Fluorescent Multifunctional Hybrid Microspheres and Their Properties

    Directory of Open Access Journals (Sweden)

    Ling-Han Xiao

    2013-04-01

    Full Text Available Novel magnetic-antimicrobial-fluorescent multifunctional hybrid microspheres with well-defined nanostructure were synthesized by the aid of a poly(glycidyl methacrylate (PGMA template. The hybrid microspheres were fully characterized by scanning electron microscopy (SEM, transmission electron microscopy (TEM, Fourier transform infrared (FTIR, X-ray diffraction (XRD and digital fluorescence microscope. The as-synthesized microspheres PGMA, amino-modified PGMA (NH2-PGMA and magnetic PGMA (M-PGMA have a spherical shape with a smooth surface and fine monodispersity. M-PGMA microspheres are super-paramagnetic, and their saturated magnetic field is 4.608 emu·g−1, which made M-PGMA efficiently separable from aqueous solution by an external magnetic field. After poly(haxemethylene guanidine hydrochloride (PHGH functionalization, the resultant microspheres exhibit excellent antibacterial performance against both Gram-positive and Gram-negative bacteria. The fluorescence feature originating from the quantum dot CdTe endowed the hybrid microspheres with biological functions, such as targeted localization and biological monitoring functions. Combination of magnetism, antibiosis and fluorescence into one single hybrid microsphere opens up the possibility of the extensive study of multifunctional materials and widens the potential applications.

  7. Exchange coupling in hybrid anisotropy magnetic multilayers quantified by vector magnetometry

    Energy Technology Data Exchange (ETDEWEB)

    Morrison, C., E-mail: C.Morrison.2@warwick.ac.uk; Miles, J. J.; Thomson, T. [School of Computer Science, University of Manchester, Manchester M13 9PL (United Kingdom); Anh Nguyen, T. N. [Materials Physics, School of ICT, KTH Royal Institute of Technology, Electrum 229, 164 40 Kista (Sweden); Spintronics Research Group, Laboratory for Nanotechnology (LNT), VNU-HCM, Ho Chi Minh City (Viet Nam); Fang, Y.; Dumas, R. K. [Department of Physics, University of Gothenburg, 412 96 Gothenburg (Sweden); Åkerman, J. [Materials Physics, School of ICT, KTH Royal Institute of Technology, Electrum 229, 164 40 Kista (Sweden); Department of Physics, University of Gothenburg, 412 96 Gothenburg (Sweden)

    2015-05-07

    Hybrid anisotropy thin film heterostructures, where layers with perpendicular and in-plane anisotropy are separated by a thin spacer, are novel materials for zero/low field spin torque oscillators and bit patterned media. Here, we report on magnetization reversal and exchange coupling in a archetypal Co/Pd (perpendicular)-NiFe (in-plane) hybrid anisotropy system studied using vector vibrating sample magnetometry. This technique allows us to quantify the magnetization reversal in each individual magnetic layer, and measure of the interlayer exchange as a function of non-magnetic spacer thickness. At large (>1 nm) spacer thicknesses Ruderman-Kittel-Kasuya-Yosida-like exchange dominates, with orange-peel coupling providing a significant contribution only for sub-nm spacer thickness.

  8. Hybrid bronchoscope tracking using a magnetic tracking sensor and image registration.

    Science.gov (United States)

    Mori, Kensaku; Deguchi, Daisuke; Akiyama, Kenta; Kitasaka, Takayuki; Maurer, Calvin R; Suenaga, Yasuhito; Takabatake, Hirotsugu; Mori, Masaki; Natori, Hiroshi

    2005-01-01

    In this paper, we propose a hybrid method for tracking a bronchoscope that uses a combination of magnetic sensor tracking and image registration. The position of a magnetic sensor placed in the working channel of the bronchoscope is provided by a magnetic tracking system. Because of respiratory motion, the magnetic sensor provides only the approximate position and orientation of the bronchoscope in the coordinate system of a CT image acquired before the examination. The sensor position and orientation is used as the starting point for an intensity-based registration between real bronchoscopic video images and virtual bronchoscopic images generated from the CT image. The output transformation of the image registration process is the position and orientation of the bronchoscope in the CT image. We tested the proposed method using a bronchial phantom model. Virtual breathing motion was generated to simulate respiratory motion. The proposed hybrid method successfully tracked the bronchoscope at a rate of approximately 1 Hz.

  9. Improvement of the levitation stability of the HTSC-permanent magnet hybrid bearing by using the new arrangement of the permanent magnet

    Science.gov (United States)

    Sukedaia, M.; Emoto, K.; Sugiyama, R.; Ohashi, S.

    The hybrid magnetic bearing using permanent magnets and the high temperature superconductor (HTSC) has been developed. Repulsive force of the permanent magnet is introduced to increase the load weight of the magnetic bearing. Effect of the hybrid system has been shown. Although the previous configuration improves the load weight of the rotor, levitation and guidance stability has been decreased because of the repulsive force of the permanent magnet. Three-dimensional numerical analysis of the system has been undertaken to reduce lateral force which decreases lateral stability of the rotor. From the results, effective arrangement of the hybrid system is given. Increment of the load weight is confirmed. Influence of the hybrid system on the pinning force between the HTSC and the permanent magnet is shown to be smaller than previous one.

  10. A Hybrid Nonlinear Control Scheme for Active Magnetic Bearings

    Science.gov (United States)

    Xia, F.; Albritton, N. G.; Hung, J. Y.; Nelms, R. M.

    1996-01-01

    A nonlinear control scheme for active magnetic bearings is presented in this work. Magnet winding currents are chosen as control inputs for the electromechanical dynamics, which are linearized using feedback linearization. Then, the desired magnet currents are enforced by sliding mode control design of the electromagnetic dynamics. The overall control scheme is described by a multiple loop block diagram; the approach also falls in the class of nonlinear controls that are collectively known as the 'integrator backstepping' method. Control system hardware and new switching power electronics for implementing the controller are described. Various experiments and simulation results are presented to demonstrate the concepts' potentials.

  11. Synchronous motor with hybrid permanent magnets on the rotor.

    Science.gov (United States)

    Slusarek, Barbara; Kapelski, Dariusz; Antal, Ludwik; Zalas, Pawel; Gwoździewicz, Maciej

    2014-07-10

    Powder metallurgy allows designers of electric motors to implement new magnetic circuit structures. A relatively new concept is the use of a magnet system consisting of various types of magnets on one rotor, for example sintered and bonded magnets. This concept has been applied to the design and manufacture of the four-pole rotor of a synchronous motor with 400 W power and a rotational speed of 1500 rpm. In this motor, the stator of an asynchronous motor type Sh 71-4B is applied. The application of the new construction of the rotor resulted in an increase in motor efficiency and power factor compared to an asynchronous motor with the same volume.

  12. Adsorption mechanism of magnetically separable Fe3O4/graphene oxide hybrids

    Science.gov (United States)

    Ouyang, Ke; Zhu, Chuanhe; Zhao, Ya; Wang, Leichao; Xie, Shan; Wang, Qun

    2015-11-01

    A reclaimable Fe3O4/graphene oxide (GO) magnetic hybrid was successfully synthesized via a facile one-pot polyol approach and employed as a recyclable adsorbent for Bisphenol A (BPA) in aqueous solutions. The maximum adsorption capacity (qm) of the Fe3O4/GO hybrid for BPA was 72.80 mg/g at 273 K. The kinetics of the adsorption process and the adsorption isotherm data were fitted using the Freundlich equation and a pseudo-second-order kinetic model. The results of the thermodynamic parameters ΔH°, ΔS° and ΔG° showed that the adsorption process was exothermic and spontaneous. Furthermore, the reusability of the samples was investigated, and the results indicated that the samples exhibited high stability. The magnetic characterization demonstrated that hybrids were superparamagnetic and could be recovered conveniently by magnetic separation. The strong π-π interaction was determined to be the predominant driving force behind the adsorption of BPA onto the Fe3O4/GO hybrid. Therefore, the Fe3O4/GO hybrid could be regarded as a potential adsorbent for wastewater treatment and purification processes.

  13. Hybrid Molecular and Spin Dynamics Simulations for Ensembles of Magnetic Nanoparticles for Magnetoresistive Systems.

    Science.gov (United States)

    Teich, Lisa; Schröder, Christian

    2015-11-13

    The development of magnetoresistive sensors based on magnetic nanoparticles which are immersed in conductive gel matrices requires detailed information about the corresponding magnetoresistive properties in order to obtain optimal sensor sensitivities. Here, crucial parameters are the particle concentration, the viscosity of the gel matrix and the particle structure. Experimentally, it is not possible to obtain detailed information about the magnetic microstructure, i.e., orientations of the magnetic moments of the particles that define the magnetoresistive properties, however, by using numerical simulations one can study the magnetic microstructure theoretically, although this requires performing classical spin dynamics and molecular dynamics simulations simultaneously. Here, we present such an approach which allows us to calculate the orientation and the trajectory of every single magnetic nanoparticle. This enables us to study not only the static magnetic microstructure, but also the dynamics of the structuring process in the gel matrix itself. With our hybrid approach, arbitrary sensor configurations can be investigated and their magnetoresistive properties can be optimized.

  14. Hybrid magnetic mechanism for active locomotion based on inchworm motion

    Science.gov (United States)

    Kim, Sung Hoon; Hashi, Shuichiro; Ishiyama, Kazushi

    2013-02-01

    Magnetic robots have been studied in the past. Insect-type micro-robots are used in various biomedical applications; researchers have developed inchworm micro-robots for endoscopic use. A biological inchworm has a looping locomotion gait. However, most inchworm micro-robots depend on a general bending, or bellows, motion. In this paper, we introduce a new robotic mechanism using magnetic force and torque control in a rotating magnetic field for a looping gait. The proposed robot is controlled by the magnetic torque, attractive force, and body mechanisms (two stoppers, flexible body, and different frictional legs). The magnetic torque generates a general bending motion. In addition, the attractive force and body mechanisms produce the robot’s looping motion within a rotating magnetic field and without the use of an algorithm for field control. We verified the device’s performance and analyzed the motion through simulations and various experiments. The robot mechanism can be applied to active locomotion for various medical robots, such as wireless endoscopes.

  15. Electronic and magnetic properties of modified silicene/graphene hybrid: Ab initio study

    Energy Technology Data Exchange (ETDEWEB)

    Chowdhury, Suman; Jana, Debnarayan, E-mail: cujanad@yahoo.com

    2016-11-01

    Among other two-dimensional (2D) novel materials, graphene and silicene both have drawn intense research interest among the researchers because they possess some unique intriguing properties which can change the scenario of the current electronic industry. In this work we have studied the electronic and the magnetic properties of a new kind of materials which is the hybrid of these two materials. Density functional theory (DFT) has been employed to calculate the relevant electronic and magnetic properties of this hybrid material. The pristine structure is modified by substitutional doping or by creating vacancy (Y-X, where one Y atom (Si or C) has been replaced by one X atom (B, N, Al, P or void)). The calculations have revealed that void systems are unstable while Si-B and Si-N are most stable ones. It has been noticed that some of these doped structures are magnetic in nature having induced mid-gap states in the system. In particular, Si-void structure is unstable yet it possess the highest magnetic moment of the order of 4 μ{sub B} (μ{sub B} being the Bohr magneton). The estimated band gaps of modified silicene/graphene hybrid from spin polarized partial density of states (PDOS) vary between 1.43–2.38 eV and 1.58–2.50 eV for spin-up and spin-down channel respectively. The implication of midgap states has been critically analysed in the light of magnetic nature. This study may be useful to build hybrid spintronic devices with controllable gap for spin up and spin down states. - Graphical abstract: We have studied the electronic and magnetic properties of silicene/graphene hybrid by employing density functional theory (DFT). - Highlights: • Electronic and magnetic properties of two dimensional graphene/silicene hybrid have been explored. • There is no magnetism in the system for a single carbon atom vacancy. • A net magnetic moment of 4.0 Bohr magneton is observed for a single silicon atom vacancy. • Unpaired electrons introduce mid-gap states which

  16. CURRENT VECTOR CONTROL OF PERMANENT-MAGNET SYNCHRONOUS MOTOR OF HYBRID VEHICLE ENGINE

    Directory of Open Access Journals (Sweden)

    S. Serikov

    2009-01-01

    Full Text Available Characteristics of traction permanent-magnet synchronous motor under current vector optimum control in the possible traction-speed mode area which are relevant for hybrid vehicle engine have been investigated. As a criterion of optimality a maximum of electromagnetic moment per unit of current have been taken.

  17. The solvothermal synthesis of magnetic iron oxide nanocrystals and the preparation of hybrid poly(L-lactide)-polyethyleneimine magnetic particles.

    Science.gov (United States)

    Stojanović, Zoran; Otoničar, Mojca; Lee, Jongwook; Stevanović, Magdalena M; Hwang, Mintai P; Lee, Kwan Hyi; Choi, Jonghoon; Uskoković, Dragan

    2013-09-01

    We report a simple and green procedure for the preparation of magnetic iron oxide nanocrystals via solvothermal synthesis. The nanocrystal synthesis was carried out under mild conditions in the water-ethanol-oleic acid solvent system with the use of the oleate anion as a surface modifier of nanocrystals and glucose as a reducing agent. Specific conditions for homogenous precipitation achieved in such a reaction system lead to the formation of uniform high-quality nanocrystals down to 5 nm in diameter. The obtained hydrophobic nanocrystals can easily be converted to hydrophilic magnetic nanoparticles by being immobilized in a poly(L-lactide)-polyethyleneimine polymeric matrix. These hybrid nano-constructs may find various biomedical applications, such as magnetic separation, gene transfection and/or magnetic resonance imaging. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. Magnetic ripple and the modeling of lower-hybrid current drive in tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Peysson, Y.; Arslanbekov, R.; Basiuk, V.; Carrasco, J.; Litaudon, X.; Moreau, D. [Association Euratom-CEA, Centre d`Etudes de Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee; Bizarro, J.P. [Instituto Superior Tecnico, Lisbon (Portugal). Lab. de Quimica Organica

    1996-01-01

    Using ray-tracing, a detailed investigation of the lower hybrid (LH) wave propagation in presence of toroidal magnetic field ripple is presented. By coupling ray tracing with a one-dimensional relativistic Fokker-Planck code, simulations of LH experiments have been performed for the Tore Supra tokamak. Taking into account magnetic ripple in LH simulations, a better agreement is found between numerical predictions and experimental observations, such as non-thermal Bremsstrahlung emission, current profile, ripple-induced power losses in local magnetic mirrors, when plasma conditions correspond to the ` `few passes` regime. (author). 47 refs.

  19. Study on Torque Calculation for Hybrid Magnetic Coupling and Influencing Factor Analysis

    Science.gov (United States)

    Wang, Shuang; Guo, Yong-cun; Wang, Peng-yu; Li, De-yong

    2017-03-01

    Specific to a problem that the present transmission of magnetic coupling torque was subjected to restrictions of its own structure, a hybrid magnetic coupling was proposed. Then, finite element method was adopted to carry out numerical calculations for its three-dimensional magnetic field to obtain three-dimensional magnetic field distribution of radial and axial configurations. Major influencing factors of its torque, such as lengths of axial and radial air gaps, thicknesses of axial and radial permanent magnets, the number of slots in axial copper rotor, thickness of axial and radial copper rotor, etc., were analyzed. The relevant results indicated that in certain conditions of shapes, ten magnetic poles of the axial permanent magnet rotor, nine of the radial permanent magnet rotor and nine slots from the axial copper rotor were used. Correspondingly, the axial copper rotor had a thickness of 20 mm and it was 5 mm for the radial copper rotor. Moreover, the maximum torque could reach 190 N.m approximately. If lengths of axial and radial air gaps increased, the torque may go down otherwise. Within a certain scope, the torque rose in the first place and then fell with increases in the permanent magnet thickness of axial permanent magnetic rotor, the number of axial and radial magnetic poles, the number of slots in axial copper rotor, and the thickness of axial copper rotor. Additionally, the number of slots in the axial copper rotor could not be equivalent to that of magnetic poles in axial permanent magnetic rotor. However, as the permanent magnet thickness of radial permanent magnetic rotor rose, the torque went up as well.

  20. Reduction hybrid artifacts of EMG-EOG in electroencephalography evoked by prefrontal transcranial magnetic stimulation

    Science.gov (United States)

    Bai, Yang; Wan, Xiaohong; Zeng, Ke; Ni, Yinmei; Qiu, Lirong; Li, Xiaoli

    2016-12-01

    Objective. When prefrontal-transcranial magnetic stimulation (p-TMS) performed, it may evoke hybrid artifact mixed with muscle activity and blink activity in EEG recordings. Reducing this kind of hybrid artifact challenges the traditional preprocessing methods. We aim to explore method for the p-TMS evoked hybrid artifact removal. Approach. We propose a novel method used as independent component analysis (ICA) post processing to reduce the p-TMS evoked hybrid artifact. Ensemble empirical mode decomposition (EEMD) was used to decompose signal into multi-components, then the components were separated with artifact reduced by blind source separation (BSS) method. Three standard BSS methods, ICA, independent vector analysis, and canonical correlation analysis (CCA) were tested. Main results. Synthetic results showed that EEMD-CCA outperformed others as ICA post processing step in hybrid artifacts reduction. Its superiority was clearer when signal to noise ratio (SNR) was lower. In application to real experiment, SNR can be significantly increased and the p-TMS evoked potential could be recovered from hybrid artifact contaminated signal. Our proposed method can effectively reduce the p-TMS evoked hybrid artifacts. Significance. Our proposed method may facilitate future prefrontal TMS-EEG researches.

  1. Initial position estimation strategy for a surface permanent magnet synchronous motor used in hybrid electric vehicles

    Institute of Scientific and Technical Information of China (English)

    Bing TIAN; Qun-tao AN; Li SUN‡; Dong-yang SUN; Jian-dong DUAN

    2016-01-01

    A novel nonlinear model for surface permanent magnet synchronous motors (SPMSMs) is adopted to estimate the initial rotor position for hybrid electric vehicles (HEVs). Usually, the accuracy of initial rotor position estimation for SPMSMs relies on magnetic saturation. To verify the saturation effect, the transient finite element analysis (FEA) model is presented first. Hybrid injection of a static voltage vector (SVV) superimposed with a high-frequency rotating voltage is proposed. The magnetic polarity is roughly identified with the aid of the saturation evaluation function, based on which an estimation of the position is performed. During this procedure, a special demodulation is suggested to extract signals of iron core saturation and rotor position. A Simulink/MATLAB platform for SPMSMs at standstill is constituted, and the effectiveness of the proposed strategy is verified. The proposed method is also validated by experimental results of an SPMSM drive.

  2. Design of smart oligo(ethylene glycol)-based biocompatible hybrid microgels loaded with magnetic nanoparticles.

    Science.gov (United States)

    Boularas, Mohamed; Gombart, Emilie; Tranchant, Jean-François; Billon, Laurent; Save, Maud

    2015-01-01

    This article reports a rational strategy for preparing smart oligo(ethylene glycol)-based hybrid microgels loaded with high content of homogeneously distributed preformed magnetic nanoparticles (NPs) (up to 33 wt%). The strategy is based on the synthesis of biocompatible multiresponsive microgels by precipitation copolymerization of di(ethylene glycol) methyl ether methacrylate, oligo(ethylene glycol) methyl ether methacrylate, methacrylic acid, and oligo(ethylene glycol)diac-rylate. An aqueous dispersion of preformed magnetic NPs is straightforwardly loaded into the microgels. Robust monodisperse thermoresponsive magnetic microgels are produced, exhibiting a constant value of the volume phase transition temperature whatever the NPs content. The homogeneous microstructure of the initial stimuli-responsive biocompatible microgels plays a crucial role for the design of unique well-defined ethylene glycol-based thermoresponsive hybrid microgels. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Facile method to synthesize magnetic iron oxides/TiO2 hybrid nanoparticles and their photodegradation application of methylene blue

    Directory of Open Access Journals (Sweden)

    Wu Wei

    2011-01-01

    Full Text Available Abstract Many methods have been reported to improving the photocatalytic efficiency of organic pollutant and their reliable applications. In this work, we propose a facile pathway to prepare three different types of magnetic iron oxides/TiO2 hybrid nanoparticles (NPs by seed-mediated method. The hybrid NPs are composed of spindle, hollow, and ultrafine iron oxide NPs as seeds and 3-aminopropyltriethyloxysilane as linker between the magnetic cores and TiO2 layers, respectively. The composite structure and the presence of the iron oxide and titania phase have been confirmed by transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectra. The hybrid NPs show good magnetic response, which can get together under an external applied magnetic field and hence they should become promising magnetic recovery catalysts (MRCs. Photocatalytic ability examination of the magnetic hybrid NPs was carried out in methylene blue (MB solutions illuminated under Hg light in a photochemical reactor. About 50% to 60% of MB was decomposed in 90 min in the presence of magnetic hybrid NPs. The synthesized magnetic hybrid NPs display high photocatalytic efficiency and will find recoverable potential applications in cleaning polluted water with the help of magnetic separation.

  4. Nanoscale switch for vortex polarization mediated by Bloch core formation in magnetic hybrid systems

    Science.gov (United States)

    Wohlhüter, Phillip; Bryan, Matthew Thomas; Warnicke, Peter; Gliga, Sebastian; Stevenson, Stephanie Elizabeth; Heldt, Georg; Saharan, Lalita; Suszka, Anna Kinga; Moutafis, Christoforos; Chopdekar, Rajesh Vilas; Raabe, Jörg; Thomson, Thomas; Hrkac, Gino; Heyderman, Laura Jane

    2015-08-01

    Vortices are fundamental magnetic topological structures characterized by a curling magnetization around a highly stable nanometric core. The control of the polarization of this core and its gyration is key to the utilization of vortices in technological applications. So far polarization control has been achieved in single-material structures using magnetic fields, spin-polarized currents or spin waves. Here we demonstrate local control of the vortex core orientation in hybrid structures where the vortex in an in-plane Permalloy film coexists with out-of-plane maze domains in a Co/Pd multilayer. The vortex core reverses its polarization on crossing a maze domain boundary. This reversal is mediated by a pair of magnetic singularities, known as Bloch points, and leads to the transient formation of a three-dimensional magnetization structure: a Bloch core. The interaction between vortex and domain wall thus acts as a nanoscale switch for the vortex core polarization.

  5. Hybrid materials: Magnetite-Polyethylenimine-Montmorillonite, as magnetic adsorbents for Cr(VI) water treatment.

    Science.gov (United States)

    Larraza, Iñigo; López-Gónzalez, Mar; Corrales, Teresa; Marcelo, Gema

    2012-11-01

    Hybrid materials formed by the combination of a sodium rich Montmorillonite (MMT), with magnetite nanoparticles (40 nm, Fe(3)O(4) NPs) coated with Polyethylenimine polymer (PEI 800 g/mol or PEI 25000 g/mol) were prepared. The intercalation of the magnetite nanoparticles coated with PEI among MMT platelets was achieved by cationic exchange. The resulting materials presented a high degree of exfoliation of the MMT sheets and a good dispersion of Fe(3)O(4) NPs on both the surface and among the layers of MMT. The presence of amine groups in the PEI structure not only aids the exfoliation of the MMT layers, but also gives to the hybrid material the necessary functionality to interact with heavy metals. These hybrid materials were used as magnetic sorbent for the removal of hexavalent chromium from water. The effect that pH, Cr(VI) concentration, and adsorbent material composition have on the Cr(VI) removal efficiency was studied. A complete characterization of the materials was performed. The hybrid materials showed a slight dependence of the removal efficiency with the pH in a wide range (1-9). A maximum amount of adsorption capacity of 8.8 mg/g was determined by the Langmuir isotherm. Results show that these hybrid materials can be considered as potential magnetic adsorbent for the Cr(VI) removal from water in a wide range of pH.

  6. Hybrid model predictive control for speed control of permanent magnet synchronous motor with saturation

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    A discrete-time hybrid model of a permanent magnet synchronous motor (PMSM) with saturation in voltage and current is formulated.The controller design with incorporated constraints is achieved in a systematic way from modeling to control synthesis and implementation.The Hybrid System Description Language is used to obtain a mixed-logical dynamical (MLD) model.Based on the MLD model,a model predictive controller is designed for an optimal speed regulation of the motor.For reducing computation complexity and ...

  7. Basic Characteristics and Design of a Novel Hybrid Magnetic Bearing for Wind Turbines

    Directory of Open Access Journals (Sweden)

    Yanjun Yu

    2016-11-01

    Full Text Available This paper proposes a five-degree-of-freedom (5-DOF hybrid magnetic bearing (HMB for direct-drive wind turbines, which can realize suspension in the 4-DOF radial and 1-DOF axial directions. Only two sets of radial control windings are employed in the proposed HMB because only one set of radial control windings can achieve the 2-DOF suspension in the radial direction. Unlike the traditional active thrust magnetic bearings, this paper uses a cylindrical rotor core without a large thrust disc in the novel HMB. The numbers of the controller, power amplifier and system volume can be reduced in the magnetic suspension system. This paper also presents the structure and basic characteristics of the proposed magnetic bearing. A precision equivalent magnetic circuit analysis of the permanent magnet ring and control magnetic field is conducted in this study, in consideration of the non-uniform distribution of magnetic density. Accordingly, the mathematical models, including the suspension force expression, are derived based on the accurate equivalent magnetic circuit. The basic principle of the structure parameter design is presented, based on the given key parameters. The accuracy of the analytical method is further validated by 3D finite element analysis.

  8. Hot-injection synthesis of Ni-ZnO hybrid nanocrystals with tunable magnetic properties and enhanced photocatalytic activity

    Science.gov (United States)

    Zeng, Deqian; Qiu, Yulong; Chen, Yuanzhi; Zhang, Qinfu; Liu, Xiang; Peng, Dong-Liang

    2017-04-01

    Magnetic metal-semiconductor hybrid nanocrystals containing ferromagnetic Ni and semiconductor ZnO have been prepared via a hot-injection route. The Ni-ZnO hybrid nanocrystals have a flower-like morphology that consists of Ni inner cores and ZnO petal shells. In spite of their large lattice mismatch, ZnO nanocrystals can still grow on faceted Ni nanocrystals to form stable interfaces. The composition of Ni-ZnO hybrid nanocrystals is readily controlled, and the average size of Ni core is tunable from 25 to 50 nm. Room temperature ferromagnetic properties are observed in these hybrid nanocrystals, and tunable magnetic properties also can be achieved by varying the size of Ni core. The as-prepared Ni-ZnO hybrid nanocrystals exhibit enhanced photocatalytic performance under ultraviolet light illumination as compared to pure ZnO nanocrystals. Furthermore, the superior reusability of hybrid nanocrystals for photocatalytic application is achieved by virtue of their magnetic properties. The facile and efficient seed-mediate strategy is particularly attractive to construct hybrid magnetic-semiconducting heterostructures. The as-obtained Ni-ZnO hybrid nanocrystals offer great potential for various applications due to their combined magnetic and semiconducting properties and low-cost earth-abundant availability.

  9. Optimum Design and Analysis of Axial Hybrid Magnetic Bearings Using Multi-Objective Genetic Algorithms

    Science.gov (United States)

    Rao, J. S.; Tiwari, R.

    2012-01-01

    Design optimization of axial hybrid magnetic thrust bearings (with bias magnets) was carried out using multi-objective evolutionary algorithms (MOEAs) and compared with the case of electromagnetic bearings (without bias magnets). Mathematical models of objective functions and associated constraints are presented and discussed. The different aspects of implemented MOEA are discussed. It is observed that the size of the bearing with bias magnets is considerably reduced as compared to the case of those without bias magnets, with the objective function as the minimization of weight for the same operating conditions. Similarly, current densities aret reduced drastically with biased magnets when the objective function is chosen as the minimization of the power loss. For illustration of various performances of the bearing, a typical design has been chosen from the final optimized population by an "a posteriori" approach. Sensitivities for both the objective functions with respect to the outer radius, the inner radius, and the height of coil are observed to be approximately in the ratio 2.5:1.6:1. Analysis of final optimized population has been carried out and is compared with the case without bias magnets and some salient points are observed in the case of using bias magnets.

  10. Polystyrene-Core-Silica-Shell Hybrid Particles Containing Gold and Magnetic Nanoparticles.

    Science.gov (United States)

    Tian, Jia; Vana, Philipp

    2016-02-18

    Polystyrene-core-silica-shell hybrid particles were synthesized by combining the self-assembly of nanoparticles and the polymer with a silica coating strategy. The core-shell hybrid particles are composed of gold-nanoparticle-decorated polystyrene (PS-AuNP) colloids as the core and silica particles as the shell. PS-AuNP colloids were generated by the self-assembly of the PS-grafted AuNPs. The silica coating improved the thermal stability and dispersibility of the AuNPs. By removing the "free" PS of the core, hollow particles with a hydrophobic cage having a AuNP corona and an inert silica shell were obtained. Also, Fe3O4 nanoparticles were encapsulated in the core, which resulted in magnetic core-shell hybrid particles by the same strategy. These particles have potential applications in biomolecular separation and high-temperature catalysis and as nanoreactors.

  11. A Hybrid Extended Kalman Filter as an Observer for a Pot-Electro-Magnetic Actuator

    Science.gov (United States)

    Schmidt, Simon; Mercorelli, Paolo

    2017-01-01

    This paper deals with an application in which a hybrid extended Kalman Filter (HEKF) is used to estimate state variables in a U-shaped electro-magnetic actuator to be used in mechanical systems. In this context a hybrid Kalman Filter is the one which switches between different models. The paper proposes a hybrid model for an extended Kalman Filter to be used as an observer to estimate the state and to control the force of the actuator. Applications include position, velocity and force control in automotive, engine and manufacturing systems. This work is focused on the estimation of state variables of the actuator. Simulated results show the effectiveness of the proposed approach.

  12. MODELLING AND TORQUE TRACKING CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR FOR HYBRID ELECTRIC VEHICLES

    Directory of Open Access Journals (Sweden)

    Mohd Sabirin Rahmat

    2013-06-01

    Full Text Available This paper presents a detailed derivation of a permanent magnet synchronous motor, which may be used as the electric power train for the simulation of a hybrid electric vehicle. A torque tracking control of the permanent magnet synchronous motor is developed by using an adaptive proportional-integral-derivative controller. Several tests such as step function, saw tooth function, sine wave function and square wave function were used in order to examine the performance of the proposed control structure. The effectiveness of the proposed controller was verified and compared with the same system under a PID controller and the desired control. The result of the observations shows that the proposed control structure proves to be effective in tracking the desired torque with a good response. The findings of this study will be considered in the design, optimisation and experimentation of series hybrid electric vehicle.

  13. Relativistic Adiabatic Time-Dependent Density Functional Theory Using Hybrid Functionals and Noncollinear Spin Magnetization

    DEFF Research Database (Denmark)

    Bast, Radovan; Jensen, Hans Jørgen Aagaard; Saue, Trond

    2009-01-01

    We report an implementation of adiabatic time-dependent density functional theory based on the 4-component relativistic Dirac-Coulomb Hamiltonian and a closed-shell reference. The implementation includes noncollinear spin magnetization and full derivatives of functionals, including hybrid...... and time reversal symmetry on trial vectors to obtain even better reductions in terms of memory and run time, and without invoking approximations. Further reductions are obtained by exploiting point group symmetries for D2h and subgroups in a symmetry scheme where symmetry reductions translate...... into reduction of algebra from quaternion to complex or real. For hybrid GGAs with noncollinear spin magnetization we derive a new computationally advantageous equation for the full second variational derivatives of such exchange-correlation functionals. We apply our implementation to calculations on the ns2...

  14. Dust-cyclotron and dust-lower-hybrid modes in self-gravitating magnetized dusty plasmas

    Indian Academy of Sciences (India)

    A K Banerjee; M N Alam; A A Mamun

    2003-07-01

    Theoretical investigation has been made on two different ultra-low-frequency electrostatic modes, namely, dust-cyclotron mode and dust-lower-hybrid mode, propagating perpendicular to the external magnetic field, in a self-gravitating magnetized two-fluid dusty plasma system. It has been shown that the effect of the self-gravitational force, acting on both dust grains and ions, significantly modifies the dispersion properties of these two electrostatic modes. The implications of these results to some space and astrophysical dusty plasma systems, especially to planetary ring-systems and cometary tails, are briefly mentioned.

  15. An integrated hybrid system for genetic analysis combining EWOD sample preparation and magnetic detection

    Energy Technology Data Exchange (ETDEWEB)

    Brennan, Des; Dinca, Mihai; Aherne, Margaret; Galvin, Paul [Tyndall National Institute, University College, Cork, Lee Maltings, Prospect Row, Cork (Ireland); Jary, Dorothee; Peponnet, Christine [CEA-LETI, Department of Technology for Biology and Health, 17 Avenue Des Martyrs, 38054 Grenoble (France); Cardosa, Filipe; Freitas, Paolo, E-mail: des.brennan@tyndall.ie [INESC-MN, Rua Alves Redol, 9, 1000-029 Lisbon (Portugal)

    2011-08-17

    Over the last decade microelectronic technologies have delivered significant advances in devices for point of care diagnostics. Complex microfluidic systems integrate components such as valves, pumps etc. to manipulate liquids. In recent years, the drive is to combine biochemical protocols in a single system, delivering 'sample in answer out'. An Electrowetting on Dielectric (EWOD) device offers the possibility to move and manipulate 64nl volumes implementing biochemical processes, while the magnetic sensor facilitates hybridisation detection. We outline an injection molding approach where EWOD and magnetic devices are integrated into a hybrid microfluidic system with the potential to implement 'sample in answer out' biological protocols.

  16. An integrated hybrid system for genetic analysis combining EWOD sample preparation and magnetic detection

    Science.gov (United States)

    Brennan, Des; Jary, Dorothee; Peponnet, Christine; Cardosa, Filipe; Freitas, Paolo; Dinca, Mihai; Aherne, Margaret; Galvin, Paul

    2011-08-01

    Over the last decade microelectronic technologies have delivered significant advances in devices for point of care diagnostics. Complex microfluidic systems integrate components such as valves, pumps etc. to manipulate liquids. In recent years, the drive is to combine biochemical protocols in a single system, delivering "sample in answer out". An Electrowetting on Dielectric (EWOD) device offers the possibility to move and manipulate 64nl volumes implementing biochemical processes, while the magnetic sensor facilitates hybridisation detection. We outline an injection molding approach where EWOD and magnetic devices are integrated into a hybrid microfluidic system with the potential to implement "sample in answer out" biological protocols.

  17. Plasma environment of magnetized asteroids: a 3-D hybrid simulation study

    Directory of Open Access Journals (Sweden)

    S. Simon

    2006-03-01

    Full Text Available The interaction of a magnetized asteroid with the solar wind is studied by using a three-dimensional hybrid simulation code (fluid electrons, kinetic ions. When the obstacle's intrinsic magnetic moment is sufficiently strong, the interaction region develops signs of magnetospheric structures. On the one hand, an area from which the solar wind is excluded forms downstream of the obstacle. On the other hand, the interaction region is surrounded by a boundary layer which indicates the presence of a bow shock. By analyzing the trajectories of individual ions, it is demonstrated that kinetic effects have global consequences for the structure of the interaction region.

  18. Torque Analysis of Permanent Magnet Hybrid Stepper Motor using Finite Element Method for Different Design Topologies

    Directory of Open Access Journals (Sweden)

    E.V.C Sekhara Rao

    2012-01-01

    Full Text Available This paper discusses about permanent magnet hybrid stepper motor magnetic circuit using finite element model for different geometric designs like uniform air-gap, non uniform air-gap, for different air-gap lengths, different tooth pitches and extra teeth on stator using PDE toolbox of Matlab at different current densities. Implementing these results in equivalent circuit model (permeance model, motor performance is analyzed for an existing motor for steady state conditions. These results suggest modifications for better performance of the PMH stepper motor like reduction of cogging torque and improvement in steady state torque with minimum THD.

  19. Research on Operation Principle and Control of Novel Hybrid Excitation Bearingless Permanent Magnet Generator

    Directory of Open Access Journals (Sweden)

    Huangqiu Zhu

    2016-08-01

    Full Text Available Under the condition of load changing, the magnetic field of traditional permanent magnet generators (PMG is hard to be adjusted, and the mechanical bearings are significantly worn. To overcome the drawbacks above, a novel hybrid excitation bearingless permanent magnet generator (HEBPMG is proposed in this paper, which has integrated the merits of hybrid excitation permanent magnet generators and magnetic bearings. Firstly, the structure and winding configuration of the HEBPMG are introduced, and then the principles of radial suspension and power generation are presented. The suspension principle as well as power generation principle is analyzed in this paper. Then, the flux linkage and induced voltage equations are derived, and the accurate mathematical model of radial suspension force is built based on the Maxwell tensor method. Subsequently, by means of the finite element analysis software-ANSYS Maxwell, the corresponding electromagnetic characteristics are analyzed to verify the correctness of the mentioned models. In addition, a compensation control strategy based on flux-linkage observation is proposed to solve the problems of unstable suspension force and generating voltage under variable load condition in this paper. Meanwhile, the corresponding control system is constructed and its feasibility is validated by simulation results. Finally, an experimental prototype of a 2.2 kW HEBPMG is tested. Experimental researches show that the HEBPMG can operate steadily under variable load condition and possess good suspension performance and power generation quality.

  20. Bio-bar-code functionalized magnetic nanoparticle label for ultrasensitive flow injection chemiluminescence detection of DNA hybridization.

    Science.gov (United States)

    Bi, Sai; Zhou, Hong; Zhang, Shusheng

    2009-10-07

    A signal amplification strategy based on bio-bar-code functionalized magnetic nanoparticles as labels holds promise to improve the sensitivity and detection limit of the detection of DNA hybridization and single-nucleotide polymorphisms by flow injection chemiluminescence assays.

  1. Controllable synthesis, magnetism and solubility enhancement of graphene nanosheets/magnetite hybrid material by covalent bonding.

    Science.gov (United States)

    Zhan, Yingqing; Yang, Xulin; Meng, Fanbin; Wei, Junji; Zhao, Rui; Liu, Xiaobo

    2011-11-01

    Hybrids of Fe(3)O(4) nanoparticles and surface-modified graphene nanosheets (GNs) were synthesized by a two-step process. First, graphene nanosheets were modified by SOCl(2) and 4-aminophenoxyphthalonitrile to introduce nitrile groups on their surface. Second, the nitrile groups of surface-modified graphene nanosheets were reacted with ferric ions on the surface of Fe(3)O(4) with the help of relatively high boiling point solvent ethylene glycol to form a GNs/Fe(3)O(4) hybrid. The covalent attachment of Fe(3)O(4) nanoparticles on the graphene nanosheet surface was confirmed by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), energy-dispersive X-ray spectrometer (EDS) and scanning electron microscopy (SEM). TEM and HRTEM observations indicated that the sizes of the nanoparticles and their coverage density on GNs could be easily controlled by changing the concentration of the precursor and the weight ratio to GNs. Magnetic measurements showed that magnetization of the hybrid materials is strongly influenced by the reaction conditions. Chemically bonded by phthalocyanine, the solubility of as-synthesized GNs/Fe(3)O(4) hybrid materials was greatly enhanced, which was believed to have potential for applications in the fields of composites, wastewater treatment and biomaterials.

  2. The topological structure of the integral quantum Hall effect in magnetic semiconductor-superconductor hybrids

    Institute of Scientific and Technical Information of China (English)

    Ren Ji-Rong; Zhu Hui

    2009-01-01

    An unconventional integer quantum Hall regime was found in magnetic semiconductor-superconductor hybrids.By making use of the decomposition of the gauge potential on a U(1) principal fibre bundle over k-space, we study the topological structure of the integral Hall conductance. It is labeled by the Hopf index β and the Brouwer degree η. The Hall conductance topological current and its evolution is discussed.

  3. Magneto-rheological response of elastomer composites with hybrid-magnetic fillers

    Science.gov (United States)

    Aloui, Sahbi; Klüppel, Manfred

    2015-02-01

    We study the magneto-rheological response of hybrid-magnetic elastomer composites consisting of two different magnetic filler particles at fixed overall concentration. Thereby, we focus on an optimization of mechanical and magnetic properties by combining highly reinforcing magnetic nano-particles (MagSilica) with micro-sized carbonyl-iron particles (CIP), which exhibit high switch ability in a magnetic field. We observe a symbiotic interaction of both filler types, especially in the case when an orientation of the magnetic filler particles is achieved due to curing in an external magnetic field. The orientation effect is significant only for the micro-sized CIP particles with high saturation magnetization, indicating that the induced magnetic moment for the nano-sized particles is too small for delivering sufficient attraction between the particles in an external magnetic field. A pronounced switching behavior is observed for the non-cross-linked melts with 15 and 20 vol.% CIP, whereby the small strain modulus increases by more than 50%. For the sample without the coupling agent silane, one even observes a relative modulus increase of about 140%, which can be related to the combined effect of a higher mobility of the particles without a silane layer and the ability of the particles to come in close contact when they are arranged in strings along the field lines. For the cross-linked samples, a maximum switching effect of about 30% is achieved for the system with pure CIP. This magneto-sensitivity decreases successively if CIP is replaced by MagSilica, while the tensile strength of the systems increases significantly. The use of silane reduces the switching effect, but it is necessary for a good mechanical performance by delivering strong chemical bonding of the magnetic filler particles to the polymer matrix.

  4. PRINCIPLES AND PARAMETER DESIGN FOR AC-DC THREE-DEGREE FREEDOM HYBRID MAGNETIC BEARINGS

    Institute of Scientific and Technical Information of China (English)

    ZHU Huangqiu; XIE Zhiyi; ZHU Dehong

    2006-01-01

    To simplify the mechanical structure, decrease the overall system size of the 3-degree freedom axial-radial magnetic bearings and reduce the manufacturing costs as well as operating costs,an innovated AC-DC 3-degree freedom hybrid magnetic bearing is proposed, which is driven by a DC amplifier in axial direction and a 3-phase power converter in radial directions respectively, and the axial and radial bias magnetic fluxes are provided with a common radial polarized permanent magnet ring. The principle producing magnetic suspension forces is introduced. By using equivalent magnetic circuit method, the calculation formulas of magnetic suspension forces and the mathematics models of the system are deduced. Nonlinearities of suspension forces and cross coupling between different degree freedoms are studied further by calculating the suspension forces at different displacements and control currents to validate the feasibility of the mathematics model. Then based on the mathematics models of the bearing, a control method of this novel bearing is designed. Lastly, the methods on parameter design and calculations of the bearing are presented, and an applicable prototype is simulated to analyze the magnetic path by using finite element analysis. The theory analysis and simulation results have shown that this magnetic bearing incorporates the merits of 3-phase AC drive, permanent magnet flux biased and axial-radial combined control, and reduces overall system size and has higher efficiency and lower cost. This innovated magnetic bearing has a wide application in super-speed and super-precision numerical control machine tools, bearingless motors, high-speed flywheels, satellites, etc.

  5. Effect of c-f hybridization on electric and magnetic properties of some Heavy Fermion (HF) systems

    Energy Technology Data Exchange (ETDEWEB)

    Sahoo, J., E-mail: jitendrasahoo2008@gmail.com [Regional Office of Vocational Education, Sambalpur, Odisha -768 004 (India); Nayak, P. [School of Physics, Sambalpur University, Sambalpur, Odisha - 768 019 (India)

    2017-02-01

    Representing the heavy fermion systems by the Periodic Anderson Model (PAM), we have used Zubarev technique to see the effect of c-f hybridization on the temperature dependence of resistivity and magnetic susceptibility. The calculated resistivity and magnetic susceptibility show the general features observed in these materials experimentally. Further, we have shown how the strength of hybridization as well as the position of the f-level affects both the properties and the Kondo temperature of these systems.

  6. Effect of c-f hybridization on electric and magnetic properties of some Heavy Fermion (HF) systems

    Science.gov (United States)

    Sahoo, J.; Nayak, P.

    2017-02-01

    Representing the heavy fermion systems by the Periodic Anderson Model (PAM), we have used Zubarev technique to see the effect of c-f hybridization on the temperature dependence of resistivity and magnetic susceptibility. The calculated resistivity and magnetic susceptibility show the general features observed in these materials experimentally. Further, we have shown how the strength of hybridization as well as the position of the f-level affects both the properties and the Kondo temperature of these systems.

  7. Development of a Hybrid Piezo Natural Rubber Piezoelectricity and Piezoresistivity Sensor with Magnetic Clusters Made by Electric and Magnetic Field Assistance and Filling with Magnetic Compound Fluid

    Directory of Open Access Journals (Sweden)

    Kunio Shimada

    2017-02-01

    Full Text Available Piezoelements used in robotics require large elasticity and extensibility to be installed in an artificial robot skin. However, the piezoelements used until recently are vulnerable to large forces because of the thin solid materials employed. To resolve this issue, we utilized a natural rubber and applied our proposed new method of aiding with magnetic and electric fields as well as filling with magnetic compound fluid (MCF and doping. We have verified the piezoproperties of the resulting MCF rubber. The effect of the created magnetic clusters is featured in a new two types of multilayered structures of the piezoelement. By measuring the piezoelectricity response to pressure, the synergetic effects of the magnetic clusters, the doping and the electric polymerization on the piezoelectric effect were clarified. In addition, by examining the relation between the piezoelectricity and the piezoresistivity created in the MCF piezo element, we propose a hybrid piezoelement.

  8. Development of a Hybrid Piezo Natural Rubber Piezoelectricity and Piezoresistivity Sensor with Magnetic Clusters Made by Electric and Magnetic Field Assistance and Filling with Magnetic Compound Fluid.

    Science.gov (United States)

    Shimada, Kunio; Saga, Norihiko

    2017-02-10

    Piezoelements used in robotics require large elasticity and extensibility to be installed in an artificial robot skin. However, the piezoelements used until recently are vulnerable to large forces because of the thin solid materials employed. To resolve this issue, we utilized a natural rubber and applied our proposed new method of aiding with magnetic and electric fields as well as filling with magnetic compound fluid (MCF) and doping. We have verified the piezoproperties of the resulting MCF rubber. The effect of the created magnetic clusters is featured in a new two types of multilayered structures of the piezoelement. By measuring the piezoelectricity response to pressure, the synergetic effects of the magnetic clusters, the doping and the electric polymerization on the piezoelectric effect were clarified. In addition, by examining the relation between the piezoelectricity and the piezoresistivity created in the MCF piezo element, we propose a hybrid piezoelement.

  9. Development of a Hybrid Piezo Natural Rubber Piezoelectricity and Piezoresistivity Sensor with Magnetic Clusters Made by Electric and Magnetic Field Assistance and Filling with Magnetic Compound Fluid

    Science.gov (United States)

    Shimada, Kunio; Saga, Norihiko

    2017-01-01

    Piezoelements used in robotics require large elasticity and extensibility to be installed in an artificial robot skin. However, the piezoelements used until recently are vulnerable to large forces because of the thin solid materials employed. To resolve this issue, we utilized a natural rubber and applied our proposed new method of aiding with magnetic and electric fields as well as filling with magnetic compound fluid (MCF) and doping. We have verified the piezoproperties of the resulting MCF rubber. The effect of the created magnetic clusters is featured in a new two types of multilayered structures of the piezoelement. By measuring the piezoelectricity response to pressure, the synergetic effects of the magnetic clusters, the doping and the electric polymerization on the piezoelectric effect were clarified. In addition, by examining the relation between the piezoelectricity and the piezoresistivity created in the MCF piezo element, we propose a hybrid piezoelement. PMID:28208625

  10. Conveying International Space Station Science

    Science.gov (United States)

    Goza, Sharon P.

    2017-01-01

    Over 1,000 experiments have been completed, and others are being conducted and planed on the International Space Station (ISS). In order to make the information on these experiments accessible, the IGOAL develops mobile applications to easily access this content and video products to convey high level concepts. This presentation will feature the Space Station Research Explorer as well as several publicly available video examples.

  11. Development of a Hybrid Magnetic Resonance and Ultrasound Imaging System

    Directory of Open Access Journals (Sweden)

    Victoria Sherwood

    2014-01-01

    Full Text Available A system which allows magnetic resonance (MR and ultrasound (US image data to be acquired simultaneously has been developed. B-mode and Doppler US were performed inside the bore of a clinical 1.5 T MRI scanner using a clinical 1–4 MHz US transducer with an 8-metre cable. Susceptibility artefacts and RF noise were introduced into MR images by the US imaging system. RF noise was minimised by using aluminium foil to shield the transducer. A study of MR and B-mode US image signal-to-noise ratio (SNR as a function of transducer-phantom separation was performed using a gel phantom. This revealed that a 4 cm separation between the phantom surface and the transducer was sufficient to minimise the effect of the susceptibility artefact in MR images. MR-US imaging was demonstrated in vivo with the aid of a 2 mm VeroWhite 3D-printed spherical target placed over the thigh muscle of a rat. The target allowed single-point registration of MR and US images in the axial plane to be performed. The system was subsequently demonstrated as a tool for the targeting and visualisation of high intensity focused ultrasound exposure in the rat thigh muscle.

  12. Hybrid Materials Based on Magnetic Layered Double Hydroxides: A Molecular Perspective.

    Science.gov (United States)

    Abellán, Gonzalo; Martí-Gastaldo, Carlos; Ribera, Antonio; Coronado, Eugenio

    2015-06-16

    Design of functional hybrids lies at the very core of synthetic chemistry as it has enabled the development of an unlimited number of solids displaying unprecedented or even improved properties built upon the association at the molecular level of quite disparate components by chemical design. Multifunctional hybrids are a particularly appealing case among hybrid organic/inorganic materials. Here, chemical knowledge is used to deploy molecular components bearing different functionalities within a single solid so that these properties can coexist or event interact leading to unprecedented phenomena. From a molecular perspective, this can be done either by controlled assembly of organic/inorganic molecular tectons into an extended architecture of hybrid nature or by intercalation of organic moieties within the empty channels or interlamellar space offered by inorganic solids with three-dimensional (MOFs, zeolites, and mesoporous hosts) or layered structures (phosphates, silicates, metal dichalcogenides, or anionic clays). This Account specifically illustrates the use of layered double hydroxides (LDHs) in the preparation of magnetic hybrids, in line with the development of soft inorganic chemistry processes (also called "Chimie Douce"), which has significantly contributed to boost the preparation hybrid materials based on solid-state hosts and subsequent development of applications. Several features sustain the importance of LDHs in this context. Their magnetism can be manipulated at a molecular level by adequate choice of constituting metals and interlayer separation for tuning the nature and extent of magnetic interactions across and between planes. They display unparalleled versatility in accommodating a broad range of anionic species in their interlamellar space that encompasses not only simple anions but chemical systems of increasing dimensionality and functionalities. Their swelling characteristics allow for their exfoliation in organic solvents with high

  13. A dual-channel flux-switching permanent magnet motor for hybrid electric vehicles

    Science.gov (United States)

    Hua, Wei; Wu, Zhongze; Cheng, Ming; Wang, Baoan; Zhang, Jianzhong; Zhou, Shigui

    2012-04-01

    The flux-switching permanent magnet (FSPM) motor is a relatively novel brushless machine having both magnets and concentrated windings in the stator, which exhibits inherently sinusoidal PM flux-linkage, back-EMF waveforms, and high torque capability. However, in the application of hybrid electric vehicles, it is essential to prevent magnets and armature windings moving in radial direction due to the possible vibration during operation, and to ensure fault-tolerant capability. Hence, in this paper based on an original FSPM motor, a dual-channel FSPM (DC-FSPM) motor with modified structure to fix both armature windings and magnets and improved reliability is proposed for a practical 10 kW integral starter/generator (ISG) in hybrid electric vehicles. The influences of different solutions and the end-effect on the static characteristics, are evaluated based on the 2D and 3D finite element analysis, respectively. Finally, both the predicted and experimental results, compared with a prototype DC-FSPM motor and an interior PM motor used in Honda Civic, confirm that the more sinusoidal back-EMF waveform and lower torque ripple can be achieved in the DC-FSPM motor, whereas the torque is smaller under the same coil current.

  14. Optimization design of an interior permanent-magnet synchronous machine for a hybrid hydraulic excavator

    Institute of Scientific and Technical Information of China (English)

    Qi-huai CHEN; Qing-feng WANG; Tao WANG

    2015-01-01

    A hybrid power transmission system (HPTS) is a promising way to save energy in a hydraulic excavator and the electric machine is one of the key components of the system. In this paper, a design process for permanent-magnet synchronous machines (PMSMs) in a hybrid hydraulic excavator (HHE) is presented based on the analysis of the working conditions and requirements of an HHE. A parameterized design approach, which combines the analytical model and the 2D finite element method (FEM), is applied to the electric machine to improve the design efficiency and accuracy. The analytical model is employed to optimize the electric machine efficiency and obtain the stator dimension and flux density distribution. The rotor is designed with the FEM to satisfy the flux requirements obtained in stator design. The rotor configuration of the PMSM employs an interior magnet structure, thus resulting in some inverse saliency, which allows for much higher values in magnetic flux density. To reduce the rotor leakage, a disconnected type silicon steel block structure is adopted. To improve the air gap flux density distribution, the trapezoid permanent magnet (PM) and centrifugal rotor structure are applied to PMSM. Demagnetization and armature reactions are also taken into consideration and calculated by the FEM. A prototype of the newly designed electric machine has been fabri-cated and tested on the experimental platform. The analytical design results are validated by measurements.

  15. Detection of a magnetic bead by hybrid nanodevices using scanning gate microscopy

    Directory of Open Access Journals (Sweden)

    H. Corte-León

    2016-05-01

    Full Text Available Hybrid ferromagnetic(Py/non-magnetic metal(Au junctions with a width of 400 nm are studied by magnetotransport measurements, magnetic scanning gate microscopy (SGM with a magnetic bead (MB attached to the probe, and micromagnetic simulations. In the transverse geometry, the devices demonstrate a characteristic magnetoresistive behavior that depends on the direction of the in plane magnetic field, with minimum/maximum variation when the field is applied parallel/perpendicular to the Py wire. The SGM is performed with a NdFeB bead of 1.6 μm diameter attached to the scanning probe. Our results demonstrate that the hybrid junction can be used to detect this type of MB. A rough approximation of the sensing volume of the junction has the shape of elliptical cylinder with the volume of ∼1.51 μm3. Micromagnetic simulations coupled to a magnetotransport model including anisotropic magnetoresistance and planar Hall effects are in good agreement with the experimental findings, enabling the interpretation of the SGM images.

  16. Detection of a magnetic bead by hybrid nanodevices using scanning gate microscopy

    Science.gov (United States)

    Corte-León, H.; Krzysteczko, P.; Marchi, F.; Motte, J.-F.; Manzin, A.; Schumacher, H. W.; Antonov, V.; Kazakova, O.

    2016-05-01

    Hybrid ferromagnetic(Py)/non-magnetic metal(Au) junctions with a width of 400 nm are studied by magnetotransport measurements, magnetic scanning gate microscopy (SGM) with a magnetic bead (MB) attached to the probe, and micromagnetic simulations. In the transverse geometry, the devices demonstrate a characteristic magnetoresistive behavior that depends on the direction of the in plane magnetic field, with minimum/maximum variation when the field is applied parallel/perpendicular to the Py wire. The SGM is performed with a NdFeB bead of 1.6 μm diameter attached to the scanning probe. Our results demonstrate that the hybrid junction can be used to detect this type of MB. A rough approximation of the sensing volume of the junction has the shape of elliptical cylinder with the volume of ˜1.51 μm3. Micromagnetic simulations coupled to a magnetotransport model including anisotropic magnetoresistance and planar Hall effects are in good agreement with the experimental findings, enabling the interpretation of the SGM images.

  17. Characterization of Extremely Low Frequency Magnetic Fields from Diesel, Gasoline and Hybrid Cars under Controlled Conditions

    Directory of Open Access Journals (Sweden)

    Ronen Hareuveny

    2015-01-01

    Full Text Available This study characterizes extremely low frequency (ELF magnetic field (MF levels in 10 car models. Extensive measurements were conducted in three diesel, four gasoline, and three hybrid cars, under similar controlled conditions and negligible background fields. Averaged over all four seats under various driving scenarios the fields were lowest in diesel cars (0.02 μT, higher for gasoline (0.04–0.05 μT and highest in hybrids (0.06–0.09 μT, but all were in-line with daily exposures from other sources. Hybrid cars had the highest mean and 95th percentile MF levels, and an especially large percentage of measurements above 0.2 μT. These parameters were also higher for moving conditions compared to standing while idling or revving at 2500 RPM and higher still at 80 km/h compared to 40 km/h. Fields in non-hybrid cars were higher at the front seats, while in hybrid cars they were higher at the back seats, particularly the back right seat where 16%–69% of measurements were greater than 0.2 μT. As our results do not include low frequency fields (below 30 Hz that might be generated by tire rotation, we suggest that net currents flowing through the cars’ metallic chassis may be a possible source of MF. Larger surveys in standardized and well-described settings should be conducted with different types of vehicles and with spectral analysis of fields including lower frequencies due to magnetization of tires.

  18. Existence of Global Weak Solutions to a Hybrid Vlasov-MHD Model for Magnetized Plasmas

    CERN Document Server

    Cheng, Bin; Tronci, Cesare

    2016-01-01

    We prove the global-in-time existence of large-data finite-energy weak solutions to an incompressible hybrid Vlasov-magnetohydrodynamic model in three space dimensions. The model couples three essential ingredients of magnetized plasmas: a transport equation for the probability density function, which models energetic rarefied particles of one species; the incompressible Navier--Stokes system for the bulk fluid; and a parabolic evolution equation, involving magnetic diffusivity, for the magnetic field. The physical derivation of our model is given. It is also shown that the weak solution, whose existence is established, has nonincreasing total energy, and that it satisfies a number of physically relevant properties, including conservation of the total momentum, conservation of the total mass, and nonnegativity of the probability density function for the energetic particles. The proof is based on a one-level approximation scheme, which is carefully devised to avoid increase of the total energy for the sequence...

  19. Zero Power Levitation Control of Hybrid Electro-Magnetic Levitation System by Load Observer

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Youn Hyun; Lee, Ju [Hanyang University, Seoul (Korea)

    2001-06-01

    This paper introduces the scheme that improve the control performance of electromagnetic levitation system with zero power controller. Magnetic levitation is used widely, but the electromagnetic force has nonlinear characteristics because it is proportioned to a square of the magnetic flux density and it is in inverse proportion to a square of the air gap. So, it is complicate and difficult to control the electromagnetic force. Besides, it is more difficult to control if the equivalent gap is unknown in case of zero power control. Therefore, this paper proposed the hybrid electro-magnetic levitation control method in which the variable load is estimated by using a load observer and its system is controlled at a new zero power equilibrium air gap position. Also it is confirmed that the proposed control method improve the control performance through simulation and experiment. (author). 10 refs., 17 figs., 1 tab.

  20. Strain-controlled magnetic domain wall propagation in hybrid piezoelectric/ferromagnetic structures

    Science.gov (United States)

    Lei, Na; Devolder, Thibaut; Agnus, Guillaume; Aubert, Pascal; Daniel, Laurent; Kim, Joo-Von; Zhao, Weisheng; Trypiniotis, Theodossis; Cowburn, Russell P.; Chappert, Claude; Ravelosona, Dafiné; Lecoeur, Philippe

    2013-01-01

    The control of magnetic order in nanoscale devices underpins many proposals for integrating spintronics concepts into conventional electronics. A key challenge lies in finding an energy-efficient means of control, as power dissipation remains an important factor limiting future miniaturization of integrated circuits. One promising approach involves magnetoelectric coupling in magnetostrictive/piezoelectric systems, where induced strains can bear directly on the magnetic anisotropy. While such processes have been demonstrated in several multiferroic heterostructures, the incorporation of such complex materials into practical geometries has been lacking. Here we demonstrate the possibility of generating sizeable anisotropy changes, through induced strains driven by applied electric fields, in hybrid piezoelectric/spin-valve nanowires. By combining magneto-optical Kerr effect and magnetoresistance measurements, we show that domain wall propagation fields can be doubled under locally applied strains. These results highlight the prospect of constructing low-power domain wall gates for magnetic logic devices.

  1. Magnetic amphiphilic hybrid carbon nanotubes containing N-doped and undoped sections: powerful tensioactive nanostructures

    Science.gov (United States)

    Purceno, Aluir D.; Machado, Bruno F.; Teixeira, Ana Paula C.; Medeiros, Tayline V.; Benyounes, Anas; Beausoleil, Julien; Menezes, Helvecio C.; Cardeal, Zenilda L.; Lago, Rochel M.; Serp, Philippe

    2014-11-01

    In this work, unique amphiphilic magnetic hybrid carbon nanotubes (CNTs) are synthesized and used as tensioactive nanostructures in different applications. These CNTs interact very well with aqueous media due to the hydrophilic N-doped section, whereas the undoped hydrophobic one has strong affinity for organic molecules. The amphiphilic character combined with the magnetic properties of these CNTs opens the door to completely new and exciting applications in adsorption science and catalysis. These amphiphilic N-doped CNTs can also be used as powerful tensioactive emulsification structures. They can emulsify water/organic mixtures and by a simple magnetic separation the emulsion can be easily broken. We demonstrate the application of these CNTs in the efficient adsorption of various molecules, in addition to promoting biphasic processes in three different reactions, i.e. transesterification of soybean oil, quinoline extractive oxidation with H2O2 and a metal-catalyzed aqueous oxidation of heptanol with molecular oxygen.In this work, unique amphiphilic magnetic hybrid carbon nanotubes (CNTs) are synthesized and used as tensioactive nanostructures in different applications. These CNTs interact very well with aqueous media due to the hydrophilic N-doped section, whereas the undoped hydrophobic one has strong affinity for organic molecules. The amphiphilic character combined with the magnetic properties of these CNTs opens the door to completely new and exciting applications in adsorption science and catalysis. These amphiphilic N-doped CNTs can also be used as powerful tensioactive emulsification structures. They can emulsify water/organic mixtures and by a simple magnetic separation the emulsion can be easily broken. We demonstrate the application of these CNTs in the efficient adsorption of various molecules, in addition to promoting biphasic processes in three different reactions, i.e. transesterification of soybean oil, quinoline extractive oxidation with H2O2 and

  2. Design analysis and performance assessment of hybrid magnetic bearings for a rotary centrifugal blood pump.

    Science.gov (United States)

    Ren, Zhaohui; Jahanmir, Said; Heshmat, Hooshang; Hunsberger, Andrew Z; Walton, James F

    2009-01-01

    A hybrid magnetic bearing system was designed for a rotary centrifugal blood pump being developed to provide long-term circulatory support for heart failure patients. This design consists of two compact bearings to suspend the rotor in five degrees-of-freedom with single axis active control. Permanent magnets are used to provide passive radial support and electromagnets to maintain axial stability of the rotor. Characteristics of the passive radial and active thrust magnetic bearing system were evaluated by the electromagnetic finite element analysis. A proportional-integral-derivative controller with force balance algorithm was implemented for closed loop control of the magnetic thrust bearing. The control position is continuously adjusted based on the electrical energy in the bearing coils, and thus passive magnetic forces carry static thrust loads to minimize the bearing current. Performance of the magnetic bearing system with associated control algorithm was evaluated at different operating conditions. The bearing current was significantly reduced with the force balance control method and the power consumption was below 0.5 W under various thrust loads. The bearing parameters predicted by the analysis were validated by the experimental data.

  3. Hybrid Molecular and Spin Dynamics Simulations for Ensembles of Magnetic Nanoparticles for Magnetoresistive Systems

    Directory of Open Access Journals (Sweden)

    Lisa Teich

    2015-11-01

    Full Text Available The development of magnetoresistive sensors based on magnetic nanoparticles which are immersed in conductive gel matrices requires detailed information about the corresponding magnetoresistive properties in order to obtain optimal sensor sensitivities. Here, crucial parameters are the particle concentration, the viscosity of the gel matrix and the particle structure. Experimentally, it is not possible to obtain detailed information about the magnetic microstructure, i.e., orientations of the magnetic moments of the particles that define the magnetoresistive properties, however, by using numerical simulations one can study the magnetic microstructure theoretically, although this requires performing classical spin dynamics and molecular dynamics simulations simultaneously. Here, we present such an approach which allows us to calculate the orientation and the trajectory of every single magnetic nanoparticle. This enables us to study not only the static magnetic microstructure, but also the dynamics of the structuring process in the gel matrix itself. With our hybrid approach, arbitrary sensor configurations can be investigated and their magnetoresistive properties can be optimized.

  4. Experiments, modeling and simulation of the magnetic behavior of inhomogeneously coated nickel/aluminum hybrid foams

    Energy Technology Data Exchange (ETDEWEB)

    Jung, A., E-mail: anne.jung@mx.uni-saarland.de [Universität des Saarlandes, Institute of Applied Mechanics, Campus A4 2, 66123 Saarbrücken (Germany); Klis, D., E-mail: d.klis@lte.uni-saarland.de [Universität des Saarlandes, Laboratory for Electromagnetic Theory, Campus C6 3, 66123 Saarbrücken (Germany); Goldschmidt, F., E-mail: f.goldschmidt@mx.uni-saarland.de [Universität des Saarlandes, Institute of Applied Mechanics, Campus A4 2, 66123 Saarbrücken (Germany)

    2015-03-15

    Open-cell metal foams are used as lightweight construction elements, energy absorbers or as support for catalytic coatings. Coating of open-cell metal foams is not only used for catalytic applications, but it leads also to tremendous increase in stiffness and energy absorption capacity. A non-line of sight coating technique for complex 3D structures is electrodeposition. Unfortunately, due to the 3D porosity and the related problems in mass transport limitation during the deposition, it is not possible to produce homogeneously coated foams. In the present contribution, we present a semi-non-destructive technique applicable to determine the coating thickness distribution of magnetic coatings by measuring the remanent magnetic field of coated foams. In order to have a closer look at the mass transport mechanism, a numerical model was developed to predict the field scans for different coating thickness distributions in the foams. For long deposition times the deposition reaches a steady state whereas a Helmholtz equation is sufficient to predict the coating thickness distribution. The applied current density could be identified as the main influencing parameter. Based on the developed model, it is possible to improve the electrodeposition process and hence the homogeneity in the coating thickness of coated metal foams. This leads to enhanced mechanical properties of the hybrid foams and contributes to better and resource-efficient energy absorbers and lightweight materials. - Highlights: • Production of hybrid foams by electrodeposition of nickel on open-cell metal foams. • Magnetic field scans for visualization of spatial coating thickness distribution. • Modeling of magnetic fields of inhomogeneously coated hybrid foams. • Investigation of mass transport limitation during coating by a Helmholtz equation. • Increasing coating homogeneity by use of low current densities and deposition rates.

  5. Magnetic field activated lipid-polymer hybrid nanoparticles for stimuli-responsive drug release.

    Science.gov (United States)

    Kong, Seong Deok; Sartor, Marta; Hu, Che-Ming Jack; Zhang, Weizhou; Zhang, Liangfang; Jin, Sungho

    2013-03-01

    Stimuli-responsive nanoparticles (SRNPs) offer the potential of enhancing the therapeutic efficacy and minimizing the side-effects of chemotherapeutics by controllably releasing the encapsulated drug at the target site. Currently controlled drug release through external activation remains a major challenge during the delivery of therapeutic agents. Here we report a lipid-polymer hybrid nanoparticle system containing magnetic beads for stimuli-responsive drug release using a remote radio frequency (RF) magnetic field. These hybrid nanoparticles show long-term stability in terms of particle size and polydispersity index in phosphate-buffered saline (PBS). Controllable loading of camptothecin (CPT) and Fe(3)O(4) in the hybrid nanoparticles was demonstrated. RF-controlled drug release from these nanoparticles was observed. In addition, cellular uptake of the SRNPs into MT2 mouse breast cancer cells was examined. Using CPT as a model anticancer drug the nanoparticles showed a significant reduction in MT2 mouse breast cancer cell growth in vitro in the presence of a remote RF field. The ease of preparation, stability, and controllable drug release are the strengths of the platform and provide the opportunity to improve cancer chemotherapy.

  6. Magnetically separable and recyclable Fe3O4-polydopamine hybrid hollow microsphere for highly efficient peroxidase mimetic catalysts.

    Science.gov (United States)

    Liu, Shujun; Fu, Jianwei; Wang, Minghuan; Yan, Ya; Xin, Qianqian; Cai, Lu; Xu, Qun

    2016-05-01

    Magnetic Fe3O4-polydopamine (PDA) hybrid hollow microspheres, in which Fe3O4 nanoparticles were firmly incorporated in the cross-linked PDA shell, have been prepared through the formation of core/shell PS/Fe3O4-PDA composites based on template-induced covalent assembly method, followed by core removal in a tetrahydrofuran solution. The morphology, composition, thermal property and magnetic property of the magnetic hybrid hollow microspheres were characterized by SEM, TEM, FT-IR, XRD, TGA, and vibrating sample magnetometer, respectively. Results revealed that the magnetic hybrid hollow microspheres had about 380 nm of inner diameter and about 30 nm of shell thickness, and 13.6 emu g(-1) of magnetization saturation. More importantly, the Fe3O4-PDA hybrid hollow microspheres exhibited intrinsic peroxidase-like activity, as they could quickly catalyze the oxidation of typical substrates 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide. Compared with PDA/Fe3O4 composites where Fe3O4 nanoparticles were loaded on the surface of PDA microspheres, the stability of Fe3O4-PDA hybrid hollow microspheres was greatly improved. As-prepared magnetic hollow microspheres might open up a new application field in biodetection, biocatalysis, and environmental monitoring. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Abbreviated guide pneumatic conveying design guide

    CERN Document Server

    Mills, David

    1990-01-01

    Abbreviated Guide: Pneumatic Conveying Design Guide describes the selection, design, and specification of conventional pneumatic conveying systems. The design procedure uses previous test data on the materials to be conveyed. The book also discusses system economics, operating costs, the choice of appropriate components or systems, system control, and system flexibility. The design system involves the type of conveying system for installation, the pipeline parameters, and also the plant components. System selection covers the properties of the material to be conveyed, plant layout, material pr

  8. A hybrid analytical model for open-circuit field calculation of multilayer interior permanent magnet machines

    Science.gov (United States)

    Zhang, Zhen; Xia, Changliang; Yan, Yan; Geng, Qiang; Shi, Tingna

    2017-08-01

    Due to the complicated rotor structure and nonlinear saturation of rotor bridges, it is difficult to build a fast and accurate analytical field calculation model for multilayer interior permanent magnet (IPM) machines. In this paper, a hybrid analytical model suitable for the open-circuit field calculation of multilayer IPM machines is proposed by coupling the magnetic equivalent circuit (MEC) method and the subdomain technique. In the proposed analytical model, the rotor magnetic field is calculated by the MEC method based on the Kirchhoff's law, while the field in the stator slot, slot opening and air-gap is calculated by subdomain technique based on the Maxwell's equation. To solve the whole field distribution of the multilayer IPM machines, the coupled boundary conditions on the rotor surface are deduced for the coupling of the rotor MEC and the analytical field distribution of the stator slot, slot opening and air-gap. The hybrid analytical model can be used to calculate the open-circuit air-gap field distribution, back electromotive force (EMF) and cogging torque of multilayer IPM machines. Compared with finite element analysis (FEA), it has the advantages of faster modeling, less computation source occupying and shorter time consuming, and meanwhile achieves the approximate accuracy. The analytical model is helpful and applicable for the open-circuit field calculation of multilayer IPM machines with any size and pole/slot number combination.

  9. Stationary magnetic shear reversal during Lower Hybrid experiments in Tore Supra

    Energy Technology Data Exchange (ETDEWEB)

    Litaudon, X.; Arslanbekov, R.; Hoang, G.T.; Joffrin, E.; Kazarian-Vibert, F.; Moreau, D.; Peysson, Y.; Bibet, P. [Association Euratom-CEA, Centre d`Etudes de Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee; Ferron, J.; Kupfer, K. [General Atomics, San Diego, CA (United States)] [and others

    1996-01-01

    Stable and stationary states with hollow current density profiles have been achieved with Lower Hybrid Current Drive (LHCD) during Lower Hybrid (LH) wave accessibility experiments. By analysing the bounded propagation domain in phase space which naturally limits the central penetration and absorption of the waves, off-axis LH power deposition has been realized in a reproducible manner. The resulting current density profile modifications have led to a global confinement enhancement attributed to the formation of an internal `transport barrier` in the central reversed shear region where the electron thermal diffusivity is reduced to its neoclassical collisional level. The multiple-pass LH wave propagation in the weak Landau damping and reversed magnetic shear regime is also investigated in the framework of a statistical theory and the experimental validation of this theory is discussed. (author). 37 refs.

  10. Magnetic loading of graphene-nickel nanoparticle hybrid for electrochemical sensing of carbohydrates.

    Science.gov (United States)

    Qu, Weidong; Zhang, Luyan; Chen, Gang

    2013-04-15

    Graphene-nickel nanoparticle hybrid was prepared by the one-step far infrared-assisted reduction of graphene oxide and nickel (II) ions using hydrazine. It was loaded on the surface of a magnetic electrode for electrochemical sensing. The feasibility and performance of the novel electrode were demonstrated by measuring carbohydrates using cyclic voltammetry and amperometry. It demonstrated that nickel nanoparticles decorated on graphene sheets exhibited higher electrocatalytic activity toward the oxidation of carbohydrates while graphene improved the electron transduction. The synergistic effect significantly enhanced the current response of carbohydrates.

  11. Influence of the lower-hybrid drift instability on magnetic reconnection in asymmetric configurations.

    Science.gov (United States)

    Roytershteyn, V; Daughton, W; Karimabadi, H; Mozer, F S

    2012-05-04

    Using fully kinetic 3D simulations of magnetic reconnection in asymmetric antiparallel configurations, we demonstrate that an electromagnetic lower-hybrid drift instability (LHDI) localized near the X line can substantially modify the reconnection mechanism in the regimes with large asymmetry, a moderate ratio of electron to ion temperature, and low plasma β. However, the mode saturates at a small amplitude in the regimes typical of Earth's magnetopause. In these cases, LHDI-driven turbulence is predominantly localized along the separatrices on the low-β side of the current sheet, in agreement with spacecraft observations.

  12. Planar Integrated Magnetics (PIM) Module in Hybrid Bidirectional DC-DC Converter for Fuel Cell Application

    DEFF Research Database (Denmark)

    Ouyang, Ziwei; Zhang, Zhe; Thomsen, Ole Cornelius

    2011-01-01

    , hereby increasing the power density of converters. In this paper, a new planar integrated magnetics (PIM) module for a phase-shift plus duty cycle controlled hybrid bi-directional dc-dc converter is proposed, which assembles one boost inductor and two transformers into an E-I-E core geometry, reducing...... and theoretical analysis, a lab prototype employing the PIM module is implemented for a fuel cell application with 20~40 V input voltage and 400 V output voltage. Detailed results from the experimental comparisons demonstrate that the PIM module is fully functional and electromagnetically equivalent...

  13. Upper-hybrid wave driven Alfvenic turbulence in magnetized dusty plasmas

    CERN Document Server

    Misra, A P

    2010-01-01

    The nonlinear dynamics of coupled electrostatic upper-hybrid (UH) and Alfven waves (AWs) is revisited in a magnetized electron-ion plasma with charged dust impurities. A pair of nonlinear equations [J.Plasma Phys. 73, 3 (2006)] that describe the interaction of UH wave envelopes (including the relativistic electron mass increase) and the density as well as the compressional magnetic field perturbations associated with the AWs is solved numerically to show that many coherent solitary patterns can be excited and saturated due to modulational instability of unstable UH waves. The evolution of these solitary patterns is also shown to appear in the states of spatiotemporal coherence, temporal as well as spatiotemporal chaos due to collision and fusion among the patterns in stochastic motion. Furthermore, these spatiotemporal features are demonstrated by the analysis of wavelet power spectra. It is found that a redistribution of wave energy takes place to higher harmonic modes with small wavelengths which, in turn, ...

  14. Feedforward-feedback hybrid control for magnetic shape memory alloy actuators based on the Krasnosel'skii-Pokrovskii model.

    Directory of Open Access Journals (Sweden)

    Miaolei Zhou

    Full Text Available As a new type of smart material, magnetic shape memory alloy has the advantages of a fast response frequency and outstanding strain capability in the field of microdrive and microposition actuators. The hysteresis nonlinearity in magnetic shape memory alloy actuators, however, limits system performance and further application. Here we propose a feedforward-feedback hybrid control method to improve control precision and mitigate the effects of the hysteresis nonlinearity of magnetic shape memory alloy actuators. First, hysteresis nonlinearity compensation for the magnetic shape memory alloy actuator is implemented by establishing a feedforward controller which is an inverse hysteresis model based on Krasnosel'skii-Pokrovskii operator. Secondly, the paper employs the classical Proportion Integration Differentiation feedback control with feedforward control to comprise the hybrid control system, and for further enhancing the adaptive performance of the system and improving the control accuracy, the Radial Basis Function neural network self-tuning Proportion Integration Differentiation feedback control replaces the classical Proportion Integration Differentiation feedback control. Utilizing self-learning ability of the Radial Basis Function neural network obtains Jacobian information of magnetic shape memory alloy actuator for the on-line adjustment of parameters in Proportion Integration Differentiation controller. Finally, simulation results show that the hybrid control method proposed in this paper can greatly improve the control precision of magnetic shape memory alloy actuator and the maximum tracking error is reduced from 1.1% in the open-loop system to 0.43% in the hybrid control system.

  15. Feedforward-feedback hybrid control for magnetic shape memory alloy actuators based on the Krasnosel'skii-Pokrovskii model.

    Science.gov (United States)

    Zhou, Miaolei; Zhang, Qi; Wang, Jingyuan

    2014-01-01

    As a new type of smart material, magnetic shape memory alloy has the advantages of a fast response frequency and outstanding strain capability in the field of microdrive and microposition actuators. The hysteresis nonlinearity in magnetic shape memory alloy actuators, however, limits system performance and further application. Here we propose a feedforward-feedback hybrid control method to improve control precision and mitigate the effects of the hysteresis nonlinearity of magnetic shape memory alloy actuators. First, hysteresis nonlinearity compensation for the magnetic shape memory alloy actuator is implemented by establishing a feedforward controller which is an inverse hysteresis model based on Krasnosel'skii-Pokrovskii operator. Secondly, the paper employs the classical Proportion Integration Differentiation feedback control with feedforward control to comprise the hybrid control system, and for further enhancing the adaptive performance of the system and improving the control accuracy, the Radial Basis Function neural network self-tuning Proportion Integration Differentiation feedback control replaces the classical Proportion Integration Differentiation feedback control. Utilizing self-learning ability of the Radial Basis Function neural network obtains Jacobian information of magnetic shape memory alloy actuator for the on-line adjustment of parameters in Proportion Integration Differentiation controller. Finally, simulation results show that the hybrid control method proposed in this paper can greatly improve the control precision of magnetic shape memory alloy actuator and the maximum tracking error is reduced from 1.1% in the open-loop system to 0.43% in the hybrid control system.

  16. Magnetic mesoporous organic-inorganic NiCo2O4 hybrid nanomaterials for electrochemical immunosensors.

    Science.gov (United States)

    Li, Qunfang; Zeng, Lingxing; Wang, Jinchao; Tang, Dianping; Liu, Bingqian; Chen, Guonan; Wei, Mingdeng

    2011-04-01

    This study demonstrates a facile and feasible strategy toward the development of advanced electrochemical immunosensors based on chemically functionalized magnetic mesoporous organic-inorganic hybrid nanomaterials, and the preparation, characterization, and measurement of relevant properties of the immunosensor for detection of carcinoembryonic antigen (CEA, as a model analyte) in clinical immunoassays. The as-prepared nanomaterials composed of a magnetic mesoporous NiCo(2)O(4) nanosheet, an interlayer of Nafion/thionine organic molecules and a nanogold layer show good adsorption properties for the attachment of horseradish peroxidase-labeled secondary anti-CEA antibody (HRP-anti-CEA). With a sandwich-type immunoassay format, the functional bionanomaterials present good analytical properties to facilitate and modulate the way it was integrated onto the electrochemical immunosensors, and allows the detection of CEA at a concentration as low as 0.5 pg/mL. Significantly, the immunosensor could be easily regenerated by only using an external magnet without the need of any dissociated reagents. Importantly, the as-synthesized magnetic mesoporous NiCo(2)O(4) nanomaterials could be further extended for detection of other biomarkers or biocompounds.

  17. Higgs mass and muon anomalous magnetic moment in the MSSM with gauge-gravity hybrid mediation

    Science.gov (United States)

    Zhu, Bin; Ding, Ran; Li, Tianjun

    2017-08-01

    In general, we can propose the hybrid supersymmetry breakings and hybrid mediations in the supersymmetric standard models. In this paper, we study the hybrid mediation for supersymmetry (SUSY) breaking. In particular, we study how to keep the good properties of gravity mediation, gauge mediation, and anomaly mediation, while solving their problems simultaneously. As an example, we consider the gauge-gravity mediation, where all the supersymmetric particles (sparticles) obtain the SUSY breaking soft terms from the traditional gravity mediation while gauge mediation gives dominant contributions to the soft terms in the colored sector due to the splitted messengers. Thus, we can realize the electroweak supersymmetry naturally where the sleptons, sneutrinos, and electroweakinos are light within one TeV while the squarks and gluino are heavy around a few TeVs. Then we can explain 125 GeV Higgs mass, satisfy the LHC SUSY search bounds, and explain the anomalous magnetic moment of muon, etc. Moreover, the gluino and squarks are well beyond the current LHC run II searches.

  18. Trapped magnetic-field properties of prototype for Gd-Ba-Cu-O/MgB2 hybrid-type superconducting bulk magnet

    Science.gov (United States)

    Naito, Tomoyuki; Mochizuki, Hidehiko; Fujishiro, Hiroyuki; Teshima, Hidekazu

    2016-03-01

    We have studied experimentally and numerically the trapped magnetic-field properties of a hybrid-type superconducting bulk magnet, which comprised an inner Gd-Ba-Cu-O (GdBCO) disk-bulk and an outer MgB2 ring-bulk, under field-cooled magnetization (FCM) and pulsed-field magnetization (PFM). The trapped field by FCM at the center of the hybrid bulk was 4.5 T at 20 K, which was 0.2 T higher than that of the inner GdBCO disk-bulk without MgB2 ring-bulk. The experimental results by FCM were quantitatively reproduced by the numerical estimations for a model, which makes it possible to understand the trapped field properties of the hybrid bulk. The total magnetic flux by FCM, which was estimated numerically, was enhanced by about 1.7 times from 0.91 mWb of the single GdBCO bulk to 1.53 mWb of the hybrid bulk. We also succeeded in magnetizing the whole hybrid bulk by applying multi-pulsed-fields. The central trapped field of 1.88 T was not enhanced, but the total magnetic flux, which was obtained experimentally, was evidently increased by 2.5 times (0.25 \\to 0.62 mWb) for the hybrid bulk. The obtained results suggest that the hybridization is effective to enhance the total magnetic flux. To confirm the reinforcing effect of the MgB2 ring to the GdBCO disk during the cooling and magnetization processes, we have measured the thermal dilatation, {\\text{}}{dL}({\\text{}}T)/{\\text{}}L(300 K), of the GdBCO, MgB2 and stainless steel. As a result, the thermal dilatation of MgB2 was smaller than that of GdBCO. MgB2 ring-bulk shows no compression effect to resist the hoop stress of the GdBCO disk-bulk during the FCM process. The reinforcing material such as the stainless steel ring must be set outside the GdBCO disk-bulk.

  19. Unidirectional Spin-Dependent Molecule-Ferromagnet Hybridized States Anisotropy in Cobalt Phthalocyanine Based Magnetic Tunnel Junctions

    Science.gov (United States)

    Barraud, Clément; Bouzehouane, Karim; Deranlot, Cyrile; Fusil, Stéphane; Jabbar, Hashim; Arabski, Jacek; Rakshit, Rajib; Kim, Dong-Jik; Kieber, Christophe; Boukari, Samy; Bowen, Martin; Beaurepaire, Eric; Seneor, Pierre; Mattana, Richard; Petroff, Frédéric

    2015-05-01

    Organic or molecular spintronics is a rising field of research at the frontier between condensed matter physics and chemistry. It aims to mix spin physics and the richness of chemistry towards designing new properties for spin electronics devices through engineering at the molecular scale. Beyond the expectation of a long spin lifetime, molecules can be also used to tailor the spin polarization of the injected current through the spin-dependent hybridization between molecules and ferromagnetic electrodes. In this Letter, we provide direct evidence of a hybrid interface spin polarization reversal due to the differing hybridization between phthalocyanine molecules and each cobalt electrode in Co /CoPc /Co magnetic tunnel junctions. Tunnel magnetoresistance and anisotropic tunnel magnetoresistance experiments show that interfacial hybridized electronic states have a unidirectional anisotropy that can be controlled by an electric field and that spin hybridization at the bottom and top interfaces differ, leading to an inverse tunnel magnetoresistance.

  20. A Novel Hybrid-Flux Magnetic Gear and Its Performance Analysis Using the 3-D Finite Element Method

    Directory of Open Access Journals (Sweden)

    Yiduan Chen

    2015-04-01

    Full Text Available This paper presents a novel hybrid-flux magnetic gear, which integrates a transverse-flux magnetic gear and an axial-flux magnetic gear into a single unit. Compared to its conventional counterparts, the proposed magnetic gear transmits a relatively high torque density. When compared to the transverse-flux magnetic gear, this new structure employs an extra iron segment between the low-speed rotor and high-speed rotor to modulate the magnetic field and contribute to the transmission of additional torque. A three-dimensional (3-D finite element method (FEM is used for the analysis of the magnetic field. In the paper a variables-decoupling method based on the sensitivity analysis of the design parameters is also presented to accelerate the optimization process of the proposed machine.

  1. Passive temperature compensation in hybrid magnets with application to the Fermilab stacker and recycler ring dipole design

    Energy Technology Data Exchange (ETDEWEB)

    Schlueter, R.D.; Marks, S.; Loper, C.; Halbach, K.

    1995-06-01

    Design theory of hybrid (permanent magnet plus iron) accelerator magnets with application to the proposed permanent magnet recycler and stacker rings at the Fermi National Laboratory is presented. Field stability in such devices requires that changes in the strength of the permanent magnet material with temperature be compensated. Field tuning techniques, including those employing variable capacitance between energized pole and magnet yoke and those employing variable energization of magnet pole pieces, are described. Mechanical configurations capable of achieving temperature compensation passively, including use of expanding liquids/gases and bimetallic springs are outlined. Active configurations, relying on a actuator, in addition to temperature compensation, have the additional benefit of enabling magnet tuning about a nominal operating field level.

  2. A hybrid magnetic/complementary metal oxide semiconductor three-context memory bit cell for non-volatile circuit design

    Science.gov (United States)

    Jovanović, B.; Brum, R. M.; Torres, L.

    2014-04-01

    After decades of continued scaling to the beat of Moore's law, it now appears that conventional silicon based devices are approaching their physical limits. In today's deep-submicron nodes, a number of short-channel and quantum effects are emerging that affect the manufacturing process, as well as, the functionality of the microelectronic systems-on-chip. Spintronics devices that exploit both the intrinsic spin of the electron and its associated magnetic moment, in addition to its fundamental electronic charge, are promising solutions to circumvent these scaling threats. Being compatible with the CMOS technology, such devices offer a promising synergy of radiation immunity, infinite endurance, non-volatility, increased density, etc. In this paper, we present a hybrid (magnetic/CMOS) cell that is able to store and process data both electrically and magnetically. The cell is based on perpendicular spin-transfer torque magnetic tunnel junctions (STT-MTJs) and is suitable for use in magnetic random access memories and reprogrammable computing (non-volatile registers, processor cache memories, magnetic field-programmable gate arrays, etc). To demonstrate the potential our hybrid cell, we physically implemented a small hybrid memory block using 45 nm × 45 nm round MTJs for the magnetic part and 28 nm fully depleted silicon on insulator (FD-SOI) technology for the CMOS part. We also report the cells measured performances in terms of area, robustness, read/write speed and energy consumption.

  3. Magnetic-responsive hybrids of Fe3O4 nanoparticles with β-lactoglobulin amyloid fibrils and nanoclusters.

    Science.gov (United States)

    Bolisetty, Sreenath; Vallooran, Jijo J; Adamcik, Jozef; Mezzenga, Raffaele

    2013-07-23

    We report on the synthesis and magnetic-responsive behavior of hybrids formed by dispersing negatively charged iron oxide (Fe3O4) magnetic nanoparticles in positively charged β-lactoglobulin protein solutions at acidic pH, followed by heating at high temperatures. Depending on the pH used, different hybrid aggregates can be obtained, such as nanoparticle-modified amyloid fibrils (pH 3) and spherical nanoclusters (pH 4.5). We investigate the effect of magnetic fields of varying strengths (0-5 T) on the alignment of these Fe3O4-modified amyloid fibrils and spherical nanoclusters using a combination of scattering, birefringence and microscopic techniques and we find a strong alignment of the hybrids upon increasing the intensity of the magnetic field, which we quantify via 2D and 3D order parameters. We also demonstrate the possibility of controlling magnetically the sol-gel behavior of these hybrids: addition of salt (NaCl, 150 mM) to a solution containing nanoparticles modified with β-lactoglobulin amyloid fibrils (2 wt % fibrils modified with 0.6 wt % Fe3O4 nanoparticles) induces first the formation of a reversible gel, which can then be converted back to solution upon application of a moderate magnetic field of 1.1 T. These hybrids offer a new appealing functional colloidal system in which the aggregation, orientational order and rheological behavior can be efficiently controlled in a purely noninvasive way by external magnetic fields of weak intensity.

  4. Presentation and Performance Evaluation of a Novel Stator-Permanent-Magnet Hybrid Stepping Motor

    Directory of Open Access Journals (Sweden)

    Binglin Lu

    2017-05-01

    Full Text Available In this paper, a new type of hybrid stepping motor (HSM with permanent magnets (PMs embedded in the stator, namely the stator-permanent-magnet hybrid stepping motor (SHSM, is presented. It has the same operation principles as the traditional HSM, with a 2-D distributed magnetic field nature and superiorities such as simpler rotor structure, easier PM cooling, higher torque and power density, and higher power grade. Its structural topology and operation principles are initially presented. Then an investigation on the performance comparison between the HSM and the SHSM, in terms of PM flux density, PM torque, detent torque, positional holding accuracy, stator core saturation issue, PM flux leakage, and PM utilization rate is carried out theoretically to make an assessment of the performance superiorities of the SHSM. A prototype of a 2-phase 8-pole 50-rotor-tooth SHSM is fabricated and experimentally compared with the HSM by using finite element analysis (FEA to verify the motor’s operational feasibility and the theoretical analysis. The FEA and experimental results show that the proposed SHSM has performance advantages such as higher torque density, higher power grade, and higher pull-out torque, holding torque, and torque-speed property, although it has performance defects such as higher torque ripple and relatively lower positional holding accuracy in the open-loop operation than the conventional HSM. Consequently, this novel SHSM is more suitable for electromechanical energy conversion applications rather than positioning mechanisms, especially taking into account the open-loop control advantage.

  5. Magnetism in Sc-doped ZnO with zinc vacancies: A hybrid density functional and GGA + U approaches

    KAUST Repository

    Kanoun, Mohammed

    2012-04-01

    We investigate the zinc vacancy effects on the electronic structures and magnetic properties of Sc-doped ZnO, by performing first-principles calculations within both GGA + U and Heyd-Scuseria-Ernzerhof hybrid functional methods. We find that Sc impurities stabilize considerably Zn vacancies. The electronic and magnetic analysis shows a half metallic ferromagnetic character with a total magnetic moment of 2.01 μ B. The magnetism mainly stems from the O 2p states around the Zn vacancies. Calculations with the hybrid density functional agree with the GGA + U results but give an accurate description of the electronic structure for pure ZnO and Sc-doped ZnO with Zn vacancies. © 2012 Elsevier B.V. All rights reserved.

  6. Design,analysis and control of hybrid excited doubly salient stator-permanent-magnet motor

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In this paper,a new hybrid excited doubly salient stator-permanent-magnet motor is proposed,where both permanent magnets and DC field windings are located in the stator.In theory,the mathematical model and design method of the motor are developed.The corresponding output power equation and the relationship between the flux control capability and the extended speed range are deduced in details.By using an efficient "one-step" three-dimensional(3D) finite element method,the electromagnetic performances are analyzed,in which the leakage flux outside the stator circumference and end-effect are taken into account.Based on the operation principle of the motor,the control strategy and scheme are developed and implemented experimentally.Both experimental results and finite element analysis show that the proposed motor not only maintains the advantages of doubly salient permanent magnet motors,but also offers high energy efficiency over a wide speed range,which makes the motor an interesting candidate for electric vehicles.

  7. Discrimination of clostridium species using a magnetic bead based hybridization assay

    Science.gov (United States)

    Pahlow, Susanne; Seise, Barbara; Pollok, Sibyll; Seyboldt, Christian; Weber, Karina; Popp, Jürgen

    2014-05-01

    Clostridium chauvoei is the causative agent of blackleg, which is an endogenous bacterial infection. Mainly cattle and other ruminants are affected. The symptoms of blackleg are very similar to those of malignant edema, an infection caused by Clostridium septicum. [1, 2] Therefore a reliable differentiation of Clostridium chauvoei from other Clostridium species is required. Traditional microbiological detection methods are time consuming and laborious. Additionally, the unique identification is hindered by the overgrowing tendency of swarming Clostridium septicum colonies when both species are present. [1, 3, 4] Thus, there is a crucial need to improve and simplify the specific detection of Clostridium chauvoei and Clostridium septicum. Here we present an easy and fast Clostridium species discrimination method combining magnetic beads and fluorescence spectroscopy. Functionalized magnetic particles exhibit plentiful advantages, like their simple manipulation in combination with a large binding capacity of biomolecules. A specific region of the pathogenic DNA is amplified and labelled with biotin by polymerase chain reaction (PCR). These PCR products were then immobilized on magnetic beads exploiting the strong biotin-streptavidin interaction. The specific detection of different Clostridium species is achieved by using fluorescence dye labeled probe DNA for the hybridization with the immobilized PCR products. Finally, the samples were investigated by fluorescence spectroscopy. [5

  8. A novel integrated 4-DOF radial hybrid magnetic bearing for MSCMG

    Science.gov (United States)

    Jinji, Sun; Ziyan, Ju; Weitao, Han; Gang, Liu

    2017-01-01

    This paper proposes a novel integrated radial hybrid magnetic bearing (RHMB) for application with the small-sized magnetically suspended control moment gyroscope (MSCMG), which can control four degrees of freedom (4-DOFs), including two radial translational DOFs and two radial tilting DOFs, and provide the axial passive resilience. The configuration and working principle of the RHMB are introduced. Mathematical models of radial force, axial resilience and moment are established by using equivalent magnetic circuit method (EMCM), from which the radial force-radial displacement, radial force-current relationships are derived, as well as axial resilience-axial displacement, moment-tilting angle and moment-current. Finite element method (FEM) is also applied to analyze the performance and characteristics of the RHMB. The analysis results are in good agreement with that calculated by the EMCM, which is helpful in designing, optimizing and controlling the RHMB. The comparisons between the performances of the integrated 4-DOF RHMB and the traditional 4-DOF RHMB are made. The contrast results indicate that the proposed integrated 4-DOF RHMB possesses better performance compared to the traditional structure, such as copper loss, current stiffness, and tilting current stiffness.

  9. Studies of a hybrid avalanche photo-detector in magnetic field

    Science.gov (United States)

    Šantelj, L.; Adachi, I.; Hataya, K.; Iori, S.; Iwata, S.; Kakuno, H.; Kataura, R.; Kawai, H.; Kindo, H.; Korpar, S.; Križan, P.; Mrvar, M.; Nath, K.; Nishida, S.; Ogawa, S.; Pestotnik, R.; Stanovnik, A.; Seljak, A.; Sumiyoshi, T.; Tabata, M.; Tahirovič, E.; Yusa, Y.

    2017-02-01

    For the Belle II spectrometer a proximity focusing RICH counter with an aerogel radiator (ARICH) will be employed as a PID system in the forward endcap region of the spectrometer. The main challenge was the development of a reliable multichannel sensor for single photons that operates in the high magnetic field of the spectrometer (1.5 T) and withstands the radiation levels expected at the experiment. A 144-channel Hybrid Avalanche Photo-Detector (HAPD) was developed with Hamamatsu Photonics K.K. and the mass production of ∼480 HAPDs was completed recently. While our first tests of HAPD performance in the magnetic field (before mass production) showed no issues, we lately observed a presence of very large signal pulses (∼5000× single photon signal), generated internally within about 20% of HAPDs, while operating in the magnetic field. The rate of these pulses varies from sample to sample. These pulses impact the HAPD performance in two ways: they introduce periods of dead time and, in some cases, damage to the front-end electronics was observed. Here we present conditions under which such large pulses are generated, their properties and impact on HAPD performance, and discuss possible mechanism of their origin.

  10. Hybrid Adaptive Filter development for the minimisation of transient fluctuations superimposed on electrotelluric field recordings mainly by magnetic storms

    Directory of Open Access Journals (Sweden)

    A. Konstantaras

    2006-01-01

    Full Text Available The method of Hybrid Adaptive Filtering (HAF aims to recover the recorded electric field signals from anomalies of magnetotelluric origin induced mainly by magnetic storms. An adaptive filter incorporating neuro-fuzzy technology has been developed to remove any significant distortions from the equivalent magnetic field signal, as retrieved from the original electric field signal by reversing the magnetotelluric method. Testing with further unseen data verifies the reliability of the model and demonstrates the effectiveness of the HAF method.

  11. Hybrid Integration of Magnetoresistive Sensors with MEMS as a Strategy to Detect Ultra-Low Magnetic Fields

    Directory of Open Access Journals (Sweden)

    João Valadeiro

    2016-05-01

    Full Text Available In this paper, we describe how magnetoresistive sensors can be integrated with microelectromechanical systems (MEMS devices enabling the mechanical modulation of DC or low frequency external magnetic fields to high frequencies using MEMS structures incorporating magnetic flux guides. In such a hybrid architecture, lower detectivities are expected when compared with those obtained for individual sensors. This particularity results from the change of sensor’s operating point to frequencies above the 1/f noise knee.

  12. Progress in the manufacture of the cable-in-conduit Nb{sub 3}Sn outsert coils for the 45 Tesla Hybrid Magnet

    Energy Technology Data Exchange (ETDEWEB)

    Painter, T.A.; Miller, J.R.; Summers, L.T. [Florida State Univ., Tallahassee, FL (United States). National High Magnetic Field Lab.] [and others

    1994-07-01

    The 45 Tesla Hybrid Magnet is being built in a collaborative effort between the National High Magnetic Field Laboratory at Florida State University and the Francis Bitter National Magnet Laboratory at the Massachusetts Institute of Technology. The Hybrid Magnet combines a resistive insert magnet with two Nb3Sn and one NbTi superconducting cable-in-conduit outsert coil to produce the required field on axis. The Nb3Sn outsert coils are being built at Intermagnetics General Corporation under contract with FSU. A design summary for the entire 100 MJ outsert magnet is presented. The design criteria and manufacturing status for the two Nb3Sn outsert coils are described.

  13. Low eddy loss axial hybrid magnetic bearing with gimballing control ability for momentum flywheel

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Jiqiang, E-mail: tjq_72@163.com [School of Instrument Science and Opto-electronics Engineering, Beihang University, Beijing 100191 (China); Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576 (Singapore); Sun, Jinji; Fang, Jiancheng [School of Instrument Science and Opto-electronics Engineering, Beihang University, Beijing 100191 (China); Shuzhi Sam, Ge [Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576 (Singapore)

    2013-03-15

    For a magnetically suspended momentum flywheel (MSMF), the spinning rotor can be tilted by a pair of the presented axial hybrid magnetic bearing (AHMB) with eight poles and rotates around the radial axes to generate a large torque to maneuver the spacecraft. To improve the control performance and gimballing control ability of the AHMB, characteristics such as magnetic suspension force, angular stiffness and tilting momentum are researched. These segmented stator poles cause the magnetic density in the thrust rotor plate to be uneven unavoidably and the rotational loss is large at high speed, but we optimized the stator poles configuration and caused the thrust rotor plate formed by bulk DT4C and laminated material to make the magnetic density in the thrust rotor plate change less and be smoother. Laminated material such as 1J50 film with a thickness of 0.1 mm can make the variation of the magnetic density in DT4C become very small and the eddy loss of it be negligible, but the stress produced in the 'O' shape stacks by reeling has a bad effect on its power loss. Nanocrystalline can reduce eddy losses and is not affected by the reeling process. Based on the AHBM consisting of the stator with eight improved poles and the presented thrust rotor plate with DT4 and nanocrystalline, the rotational loss of 5-DOF magnetically suspended momentum flywheel with angular momentum of 15 N m s at 5000 rpm has reduced from 23.4 W to 3.2 W, which proved that this AHMB has low eddy loss for the gimballing control ability. - Highlights: Black-Right-Pointing-Pointer Control methods of rotor driven by AHMBs and their characteristics are researched. Black-Right-Pointing-Pointer Optimized stator and rotor of AHMB reduce its eddy losses greatly. Black-Right-Pointing-Pointer Presented the factors affecting the eddy losses of AHMBs. Black-Right-Pointing-Pointer The good performances of AHMB with low eddy loss are proved by experiments.

  14. Perpendicular magnetic anisotropy in the Heusler alloy Co2TiSi/GaAs(001 hybrid structure

    Directory of Open Access Journals (Sweden)

    M. T. Dau

    2015-05-01

    Full Text Available Investigation of the thickness dependence of the magnetic anisotropy in B2-type Co2TiSi films on GaAs(001, shows a pronounced perpendicular magnetic anisotropy at 10 K for thicknesses up to 13.5 nm. We have evidenced that the interfacial anisotropy induced by interface clusters has a strong influence on the perpendicular magnetic anisotropy of this hybrid structure, especially at temperatures lower than the blocking temperature of the clusters (28 K. However, as this influence can be ruled out at higher temperatures, the perpendicular magnetic anisotropy which is found to persist up to room-temperature can be ascribed to the magnetic properties of the Co2TiSi films. For thicknesses larger than 15.0 nm, we observe an alignment of the magnetic easy axis parallel to the sample surface, which is most likely due to the shape anisotropy and the film structure.

  15. New Magnetic Thin Film Hybrid Materials Built by the Incorporation of Octanickel(II)-oxamato Clusters Between Clay Mineral Platelets

    NARCIS (Netherlands)

    Toma, Luminita M.; Gengler, Regis Y. N.; Cangussu, Danielle; Pardo, Emilio; Lloret, Francesc; Rudolf, Petra

    2011-01-01

    We report on a new method based on the combination of Langmuir-Schaefer deposition with self-assembly to insert highly anisotropic Ni(8) molecules in a hybrid organic-inorganic nanostructure. Spectroscopic, crystallographic, and magnetic data prove the successful insertion of the guest cationic mole

  16. Whole-body magnetic resonance angiography at 3 tesla using a hybrid protocol in patients with peripheral arterial disease

    DEFF Research Database (Denmark)

    Nielsen, Yousef W; Eiberg, Jonas P; Logager, Vibeke B

    2009-01-01

    The purpose of this study was to determine the diagnostic performance of 3T whole-body magnetic resonance angiography (WB-MRA) using a hybrid protocol in comparison with a standard protocol in patients with peripheral arterial disease (PAD). In 26 consecutive patients with PAD two different proto...

  17. Application of Nuclear Magnetic Resonance and Hybrid Methods to Structure Determination of Complex Systems.

    Science.gov (United States)

    Prischi, Filippo; Pastore, Annalisa

    2016-01-01

    The current main challenge of Structural Biology is to undertake the structure determination of increasingly complex systems in the attempt to better understand their biological function. As systems become more challenging, however, there is an increasing demand for the parallel use of more than one independent technique to allow pushing the frontiers of structure determination and, at the same time, obtaining independent structural validation. The combination of different Structural Biology methods has been named hybrid approaches. The aim of this review is to critically discuss the most recent examples and new developments that have allowed structure determination or experimentally-based modelling of various molecular complexes selecting them among those that combine the use of nuclear magnetic resonance and small angle scattering techniques. We provide a selective but focused account of some of the most exciting recent approaches and discuss their possible further developments.

  18. Using multimedia learning modules in a hybrid-online course in electricity and magnetism

    Science.gov (United States)

    Sadaghiani, Homeyra R.

    2011-06-01

    We have been piloting web-based multimedia learning modules (MLMs), developed by the Physics Education Research Group at the University of Illinois at Urbana Champaign (UIUC), as a “prelecture assignment” in several introductory physics courses at California State Polytechnic University at Pomona. In this study, we report the results from a controlled study utilizing modules on electricity and magnetism as a part of a blended hybrid-online course. We asked students in the experimental section to view the MLMs prior to attending the face-to-face class, and to make sure this would not result in additional instructional time, we reduced the weekly class time by one-third. We found that despite reduced class time, student-learning outcomes were not hindered; in fact, the implementation of the UIUC MLMs resulted in a positive effect on student performance on conceptual tests and classroom discussion questions.

  19. Magnetic composites based on hybrid spheres of aluminum oxide and superparamagnetic nanoparticles of iron oxides

    Energy Technology Data Exchange (ETDEWEB)

    Braga, Tiago P. [Langmuir - Laboratorio de Adsorcao e Catalise, Departamento de Quimica Analitica e Fisico-Quimica, Universidade Federal do Ceara, CP 6021, CEP 60455-970 Campus do Pici, Fortaleza (Brazil); Vasconcelos, Igor F. [Departamento de Engenharia Metalurgica e de Materiais, Universidade Federal do Ceara, Fortaleza (Brazil); Sasaki, Jose M. [Laboratorio de Raios X, Departamento de Fisica, Universidade Federal do Ceara, Campus do Pici, Fortaleza, CE (Brazil); Fabris, J.D.; Oliveira, Diana Q.L. de [Departamento de Quimica, Universidade Federal de Minas Gerais, Belo Horizonte (Brazil); Valentini, Antoninho, E-mail: valent@ufc.b [Langmuir - Laboratorio de Adsorcao e Catalise, Departamento de Quimica Analitica e Fisico-Quimica, Universidade Federal do Ceara, CP 6021, CEP 60455-970 Campus do Pici, Fortaleza (Brazil)

    2010-03-15

    Materials containing hybrid spheres of aluminum oxide and superparamagnetic nanoparticles of iron oxides were obtained from a chemical precursor prepared by admixing chitosan and iron and aluminum hydroxides. The oxides were first characterized with scanning electron microscopy, X-ray diffraction, and Moessbauer spectroscopy. Scanning electron microscopy micrographs showed the size distribution of the resulting spheres to be highly homogeneous. The occurrence of nano-composites containing aluminum oxides and iron oxides was confirmed from powder X-ray diffraction patterns; except for the sample with no aluminum, the superparamagnetic relaxation due to iron oxide particles were observed from Moessbauer spectra obtained at 298 and 110 K; the onset six line-spectrum collected at 20 K indicates a magnetic ordering related to the blocking relaxation effect for significant portion of small spheres in the sample with a molar ratio Al:Fe of 2:1.

  20. Using multimedia learning modules in a hybrid-online course in electricity and magnetism

    Directory of Open Access Journals (Sweden)

    Homeyra R. Sadaghiani

    2011-03-01

    Full Text Available We have been piloting web-based multimedia learning modules (MLMs, developed by the Physics Education Research Group at the University of Illinois at Urbana Champaign (UIUC, as a “prelecture assignment” in several introductory physics courses at California State Polytechnic University at Pomona. In this study, we report the results from a controlled study utilizing modules on electricity and magnetism as a part of a blended hybrid-online course. We asked students in the experimental section to view the MLMs prior to attending the face-to-face class, and to make sure this would not result in additional instructional time, we reduced the weekly class time by one-third. We found that despite reduced class time, student-learning outcomes were not hindered; in fact, the implementation of the UIUC MLMs resulted in a positive effect on student performance on conceptual tests and classroom discussion questions.

  1. General and hybrid correlation nuclear magnetic resonance analysis of phosphorus in Phytophthora palmivora.

    Science.gov (United States)

    Kirwan, Gemma M; Fernandez, David I; Niere, Julie O; Adams, Michael J

    2012-10-01

    Generalized two-dimensional (Gen2D) correlation analysis and hybrid correlation analysis have been applied to a series of dynamic (31)P nuclear magnetic resonance (NMR) spectra to monitor the in vivo metabolic changes of the plant pathogen Phytophthora palmivora in the presence and absence of phosphonate over an 18-h period. Results indicate that phosphonate exposure causes cleavage in organism polyphosphate chains as well as an increase in total sugar phosphates. In the presence of phosphonate, the NMR resonances attributed to terminal polyphosphate phosphorus reduced at a lower rate than those of middle polyphosphate phosphorus, indicating a change in average chain length and suggesting cleavage in the middle of the chain as well as at the ends. The correlation analysis techniques serve to identify and confirm spectral regions undergoing major change in the time-series data and facilitate the analysis of these dynamic changes.

  2. Magnetic silica hybrids modified with guanidine containing co-polymers for drug delivery applications

    Energy Technology Data Exchange (ETDEWEB)

    Timin, Alexander S., E-mail: a_timin@mail.ru [Inorganic Chemistry Department, Ivanovo State University of Chemistry and Technology (ISUCT), 7, Sheremetevsky prosp., 153000 Ivanovo (Russian Federation); RASA Center in Tomsk, Tomsk Polytechnic University, 30, Lenin Avenue, 634500 Tomsk (Russian Federation); Khashirova, Svetlana Yu. [Kabardino-Balkar State University, ul. Chernyshevskogo 173, Nal' chik, 360004 Kabardino-Balkaria (Russian Federation); Rumyantsev, Evgeniy V.; Goncharenko, Alexander A. [Inorganic Chemistry Department, Ivanovo State University of Chemistry and Technology (ISUCT), 7, Sheremetevsky prosp., 153000 Ivanovo (Russian Federation)

    2016-07-01

    Guanidine containing co-polymers grafted onto silica nanoparticles to form core-shell structure were prepared by sol-gel method in the presence of γ-Fe{sub 2}O{sub 3} nanoparticles. The morphological features for uncoated and coated silica particles have been characterized with scanning electron microscopy. The results show that the polymer coated silicas exhibit spherical morphology with rough polymeric surface covered by γ-Fe{sub 2}O{sub 3} nanoparticles. The grafting amount of guanidine containing co-polymers evaluated by thermogravimetric analysis was in the range from 17 to 30%. Then, the drug loading properties and cumulative release of silica hybrids modified with guanidine containing co-polymers were evaluated using molsidomine as a model drug. It was shown that after polymer grafting the loading content of molsidomine could reach up to 3.42 ± 0.21 and 2.34 ± 0.14 mg/g respectively. The maximum drug release of molsidomine is achieved at pH 1.6 (approximately 71–75% release at 37 °C), whereas at pH 7.4 drug release is lower (50.4–59.6% release at 37 °C). These results have an important implication that our magneto-controlled silica hybrids modified with guanidine containing co-polymers are promising as drug carriers with controlled behaviour under influence of magnetic field. - Highlights: • Polymer coated silica hybrids containing γ-Fe{sub 2}O{sub 3} were prepared via sol–gel method. • Polymer grafting influences pH-response and surface properties of final products. • Molsidomine as a model drug was effectively loaded into polymer coated silicas. • The drug loading depends on the nature of grafted polymer and its content.

  3. Structure and magnetic properties of SiO{sub 2}/PCL novel sol–gel organic–inorganic hybrid materials

    Energy Technology Data Exchange (ETDEWEB)

    Catauro, Michelina, E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Bollino, Flavia [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Cristina Mozzati, Maria [Department of Physics, CNISM and INSTM, University of Pavia, Via Bassi 6, 27100 Pavia (Italy); Ferrara, Chiara; Mustarelli, Piercarlo [Department of Chemistry, Section of Physical Chemistry, University of Pavia and INSTM, Via Taramelli 16, 27100 Pavia (Italy)

    2013-07-15

    Organic–inorganic nanocomposite materials have been synthesized via sol–gel. They consist of an inorganic SiO{sub 2} matrix, in which different percentages of poly(ε-caprolactone) (PCL) have been incorporated. The formation of H-bonds among the carbonyl groups of the polymer chains and Si–OH group of the inorganic matrix has been proved by means of Fourier transform infrared spectroscopy (FT-IR) analysis and has been confirmed by solid-state nuclear magnetic resonance (NMR). X-Ray diffraction (XRD) analysis highlighted the amorphous nature of the synthesized materials. Scanning electron microscope (SEM) micrograph and atomic force microscope (AFM) topography showed their homogeneous morphology and nanostructure nature. Considering the opportunity to synthesize these hybrid materials under microgravity conditions by means of magnetic levitation, superconducting quantum interference device (SQUID) magnetometry has been used to quantify their magnetic susceptibility. This measure has shown that the SiO{sub 2}/PCL hybrid materials are diamagnetic and that their diamagnetic susceptibility is independent of temperature and increases with the PCL amount. - Graphical abstract: Characterization and magnetic properties of SiO{sub 2}/PCL organic–inorganic hybrid materials synthesized via sol–gel. FT-IR, Fourier transform infrared spectroscopy; solid-state NMR: solid-state nuclear magnetic resonance; SQUID: superconducting quantum interference device. - Highlights: • Sol–gel synthesis of SiO{sub 2}/PCL amorphous class I organic–inorganic hybrid materials. • FT-IR and NMR analyses show the hydrogen bonds formation between SiO{sub 2} and PCL. • AFM and SEM analyses confirm that the SiO{sub 2}/PCL are homogenous hybrid materials. • The SQUID measures show that the simples are diamagnetic. • Diamagnetic susceptibility of SiO{sub 2}/PCL materials increases with the PCL amount.

  4. Design and parameter estimation of hybrid magnetic bearings for blood pump applications

    Science.gov (United States)

    Lim, Tau Meng; Zhang, Dongsheng; Yang, Juanjuan; Cheng, Shanbao; Low, Sze Hsien; Chua, Leok Poh; Wu, Xiaowei

    2009-10-01

    This paper discusses the design and parameter estimation of the dynamics characteristics of a high-speed hybrid magnetic bearings (HMBs) system for axial flow blood pump applications. The rotor/impeller of the pump is driven by a three-phase permanent magnet (PM) brushless and sensorless DC motor. It is levitated by two HMBs at both ends in five-degree-of-freedom with proportional-integral-derivative (PID) controllers; among which four radial directions are actively controlled and one axial direction is passively controlled. Test results show that the rotor can be stably supported to speeds of 14,000 rpm. The frequency domain parameter estimation technique with statistical analysis is adopted to validate the stiffness and damping coefficients of the HMBs system. A specially designed test rig facilitated the estimation of the bearing's coefficients in air—in both the radial and axial directions. The radial stiffness of the HMBs is compared to the Ansoft's Maxwell 2D/3D finite element magnetostatic results. Experimental estimation showed that the dynamics characteristics of the HMBs system are dominated by the frequency-dependent stiffness coefficients. The actuator gain was also successfully calibrated and may potentially extend the parameter estimation technique developed in the study of identification and monitoring of the pump's dynamics properties under normal operating conditions with fluid.

  5. Design, manufacture and performance evaluation of HTS electromagnets for the hybrid magnetic levitation system

    Energy Technology Data Exchange (ETDEWEB)

    Chu, S.Y.; Hwang, Y.J.; Choi, S.; Na, J.B.; Kim, Y.J.; Chang, K.S. [School of Electrical and Electronic Engineering, Yonsei University, Seoul 120-749 (Korea, Republic of); Bae, D.K. [Chungju National University, Chungju 380-702 (Korea, Republic of); Lee, C.Y. [Ultra High-Speed Train Research Department, Korea Railroad Research Institute, Uiwang-Si 437-757 (Korea, Republic of); Ko, T.K., E-mail: tkko@yonsei.ac.kr [School of Electrical and Electronic Engineering, Yonsei University, Seoul 120-749 (Korea, Republic of)

    2011-11-15

    A high speed electromagnetic suspension (EMS) maglev has emerged as the solution to speed limit problem that conventional high-speed railroad has. In the EMS maglev, small levitation gap needs uniform guide-way which leads to increase the construction cost. The large levitation gap can reduce the construction cost. However it is hard for normal conducting electromagnet to produce larger magneto-motive force (MMF) for generating levitation force as increased levitation gap. This is because normal conductors have limited rating current to their specific volume. Therefore, the superconducting electromagnet can be one of the solutions for producing both large levitation gap and sufficient MMF. The superconducting electromagnets have incomparably high allowable current density than what normal conductors have. In this paper, the prototype of high temperature superconducting (HTS) electromagnets were designed and manufactured applicable to hybrid electromagnetic suspension system (H-EMS). The H-EMS consists of control coils for levitation control and superconducting coils for producing MMF for levitation. The required MMF for generating given levitation force was calculated by both equations of ideal U-core magnet and magnetic field analysis using the finite element method (FEM). The HTS electromagnets were designed as double pancakes with Bi-2223/Ag tapes. Experiments to confirm its operating performance were performed in liquid nitrogen (LN{sub 2}).

  6. Semiconductor/Piezoelectrics Hybrid Heterostructures with Highly Effective Gate-Tunable Electrotransport and Magnetic Behaviors.

    Science.gov (United States)

    Chen, Lei; Zhao, Wei-Yao; Wang, Jing; Gao, Guan-Yin; Zhang, Jin-Xing; Wang, Yu; Li, Xiao-Min; Cao, Shi-Xun; Li, Xiao-Guang; Luo, Hao-Su; Zheng, Ren-Kui

    2016-10-12

    We report the epitaxial growth of oxygen deficient titanium dioxide thin films on 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 (PMN-PT) single crystals and realized highly effective in situ electrostatic manipulation of electrotransport and magnetism of TiO2-δ films via gate voltages. Upon the polarization switching in the PMN-PT, the carrier density of the TiO2-δ film could be reversibly modified, resulting in a large nonvolatile resistivity modulation by ∼51% at T = 300 K, approximately 4-12 times larger than that of other transition-metal oxide film/PMN-PT structures. By taking advantage of in situ manipulation of the carrier density via gate voltages, we found that competition between the trap of electrons by the Ti(3+)-VO pairs and that by the positive polarization charges at the interface results in a significant resistivity relaxation upon the polarization switching, and revealed that magnetization is inversely correlated with the carrier density of the TiO2-δ film. Such hybrid structures combining materials with dissimilar functionalities may have potential applications in multifunctional devices which can take advantage of the useful and unique properties of both materials.

  7. Study of Lower Hybrid Frequency Turbulence in the Magnetic Reconnection Experiment (MRX)

    Science.gov (United States)

    Dorfman, S. E.; Ji, H.; Roytershteyn, V.; Yamada, M.; Daughton, W. S.; Yoo, J.; Oz, E.; Tharp, T.; Lawrence, E. E.; Myers, C.

    2010-12-01

    One of the key open questions in magnetic reconnection is the nature of the mechanism that governs the reconnection rate in real astrophysical and laboratory systems. Comparisons between fully kinetic 2-D simulations of the Magnetic Reconnection Experiment (MRX) and experimental data indicate that three-dimensional dynamics, such as current layer disruptions recently observed in MRX, may play a key role in resolving an important discrepancy in the reconnection rate and layer width [1,2,3]. These disruptions are often associated with fluctuations in the lower hybrid frequency range and a rapid local reconnection rate. Fluctuations are observed not only in MRX [4], but also in space [5] and 3-D kinetic simulations. Comparison of fluctuation characteristics between the three domains may shed light on the underlying physics. In both the simulation and the experiments, the fluctuations are related to density gradients across the layer. The frequency range is similarly broadband up to the lower hybrid range, and the phase velocities are comparable in appropriately normalized units. However, while the electron drift speed is comparable to the phase velocity at the layer center in the experiment (consistent with previous MRX results [4]), the drift speed in the simulations is considerably larger. Furthermore, the fluctuations observed in the experiment are fully turbulent with correlation lengths the same order as the wavelength while those observed in the simulations and in space are more coherent. Some discharges also display "O-point" signatures consistent with magnetic island like structures. The present research explores the relationship between the disruptions and fluctuations in the context of the reconnection rate problem. Experiments are ongoing to determine what physics is responsible for the broader current layers (and correspondingly smaller drift speeds) observed in the experiment. [1] Y. Ren, et al., Phys. Plasmas 15, 082113 (2008). [2] S. Dorfman, et al

  8. PHOTOSPHERE EMISSION FROM A HYBRID RELATIVISTIC OUTFLOW WITH ARBITRARY DIMENSIONLESS ENTROPY AND MAGNETIZATION IN GRBs

    Energy Technology Data Exchange (ETDEWEB)

    Gao, He [Current address: Department of Astronomy and Astrophysics, Department of Physics, Center for Particle Astrophysics, Pennsylvania State University, University Park, PA 16802 (United States); Zhang, Bing, E-mail: gaohe@physics.unlv.edu, E-mail: zhang@physics.unlv.edu, E-mail: hug18@psu.edu [Department of Physics and Astronomy, University of Nevada, Las Vegas, NV 89154 (United States)

    2015-03-10

    In view of the recent Fermi observations of gamma-ray burst (GRB) prompt emission spectra, we develop a theory of photosphere emission of a hybrid relativistic outflow with a hot fireball component (defined by dimensionless entropy η) and a cold Poynting-flux component (defined by magnetization σ{sub 0} at the central engine). We consider the scenarios both without and with sub-photospheric magnetic dissipations. Based on a simplified toy model of jet dynamics, we develop two approaches: a 'bottom-up' approach to predict the temperature (for a non-dissipative photosphere) and luminosity of the photosphere emission and its relative brightness for a given pair of (η, σ{sub 0}); and a 'top-down' approach to diagnose central engine parameters (η and σ{sub 0}) based on the observed quasi-thermal photosphere emission properties. We show that a variety of observed GRB prompt emission spectra with different degrees of photosphere thermal emission can be reproduced by varying η and σ{sub 0} within the non-dissipative photosphere scenario. In order to reproduce the observed spectra, the outflows of most GRBs need to have a significant σ, both at the central engine and at the photosphere. The σ value at 10{sup 15} cm from the central engine (a possible non-thermal emission site) is usually also greater than unity, so that internal-collision-induced magnetic reconnection and turbulence (ICMART) may be the mechanism to power the non-thermal emission. We apply our top-down approach to GRB 110721A and find that the temporal evolution behavior of its blackbody component can be well interpreted with a time-varying (η, σ{sub 0}) at the central engine, instead of invoking a varying engine base size r {sub 0} as proposed by previous authors.

  9. Heat transfer and entropy generation analysis of hybrid graphene/Fe3O4 ferro-nanofluid flow under the influence of a magnetic field

    DEFF Research Database (Denmark)

    Mehrali, Mohammad; Sadeghinezhad, Emad; Akhiani, Amir Reza

    2017-01-01

    The heat transfer characteristics and entropy generation rate of hybrid graphene-magnetite nanofluids under forced laminar flow that subjected to the permanent magnetic fields were investigated. For this purpose, a nanoscale reduced graphene oxide-Fe3O4 hybrid was synthesized by using graphene...... oxide, iron salts and tannic acid as the reductant and stabilizer. The thermophysical and magnetic properties of the hybrid nanofluid have been widely characterized and thermal conductivity has shown an enhancement of 11%. The experimental results indicated that the heat transfer enhancement of hybrid...

  10. PNEUMATIC CONVEYING OF BIOMASS PARTICLES: A REVIEW

    Institute of Scientific and Technical Information of China (English)

    Heping; Cui

    2006-01-01

    Processes involving biomass are of growing interest, but handling and conveying biomass particles are challenging due to the unusual physical properties of biomass particles. This paper reviews recent work on pneumatic conveying of biomass particles, especially agricultural particles and pulp fibres. Experimental work has been mainly carried out to determine a range of parameters, such as pressure drop, particle velocity, flow regime and electrostatic charging for both horizontal and vertical conveying. Models ranging from empirical to CFD models are also being developed. Difficulties in representing turbulence and interactions among biomass particles and between the particles and fluid have so far limited the success of advanced modeling. Further work is needed to improve understanding of multiphase biomass pneumatic conveying and to assist in the development of biomass energy and conversion processes.

  11. Efficient boron abstraction using honeycomb-like porous magnetic hybrids: Assessment of techno-economic recovery of boric acid.

    Science.gov (United States)

    Oladipo, Akeem Adeyemi; Gazi, Mustafa

    2016-12-01

    Porous magnetic hybrids were synthesized and functionalized with glycidol to produce boron-selective adsorbent. The magnetic hybrid (MH) comparatively out-performed the existing expensive adsorbents. MH had a saturation magnetisation of 63.48 emu/g and average pore diameter ranging from meso to macropores. The magnetic hybrids showed excellent selectivity towards boron and resulted in 79-93% boron removal even in the presence of competing metal ions (Na(+) and Cr(2+)). Experiments were performed in a column system, and breakthrough time was observed to increase with bed depths and decreased with flow rates. The batch experiments revealed that 60 min was enough to achieve equilibrium, and the level of boron sorption was 108.5 mg/g from a synthetic solution. Several adsorption-desorption cycles were performed using a simple acid-water treatment and evaluated using various kinetic models. The spent adsorbents could be separated easily from the mixture by an external magnetic field. The cost-benefit analysis was performed for the treatment of 72 m(3)/year boron effluent, including five years straight line depreciation charges of equipment. The net profit and standard percentage confirmed that the recovery process is economically feasible.

  12. Wide Variety of Experiments Using a Cryogen-Free 27.5 T Hybrid Magnet and a Cryogen-Free 18.1 T Superconducting Magnet

    Science.gov (United States)

    Watanabe, K.; Awaji, S.; Oguro, H.

    2013-03-01

    A cryogen-free hybrid magnet without liquid helium for operation, generating 27.5 T in a 32 mm room temperature bore of an 8 MW water-cooled resistive insert magnet in an 8.5 T background field of a cryogen-free superconducting outsert magnet, is being operated for basic research at low temperatures down to 17 mK in combination with a dilution refrigerator. In addition, we are developing functional materials using a differential thermal analysis DTA at high temperatures up to 1473 K in high fields up to 27 T. This cryogen-free hybrid magnet will be upgraded to generate 29 T by improving the outer superconducting magnet. A cryogen-free 18.1 T superconducting magnet with a 52 mm room temperature experimental bore, consisting of a Bi2Sr2Ca2Cu3O10 (Bi2223) insert coil, has been developed using a GM-JT cryocooler. Recently, bronze-tape-laminated Bi2223 has revealed excellent irreversible stress tolerance of 250 MPa at 77 K. In addition, the critical current properties for recent Bi2223 tapes are largely improved from 200 to 400 A/cm-width at 77 K in a self-field. Therefore, the stainless steel reinforcement tape incorporated for the previous Bi2223 insert coil is no longer needed for a new Bi2223 one. A new Bi2223 insert coil with almost the same size as the existing insert coil can generate two times higher fields at the elevated operation current from 162 to 191 A. An upgraded cryogen-free superconducting magnet can offer a long-term experiment at the constant magnetic field of 20 T for an in-field heat-treatment investigation.

  13. A Smart Polymer Composite Based on a NiTi Ribbon and a Magnetic Hybrid Material for Actuators with Multiphysic Transduction

    Directory of Open Access Journals (Sweden)

    Beatriz López-Walle

    2015-12-01

    Full Text Available A smart composite material constituted of a magnetic hybrid film and a NiTi shape memory alloy (SMA ribbon was obtained and characterized. The magnetic hybrid film was joined to the NiTi ribbon in order to combine the properties of both materials. This new composite material combines magnetic properties of the hybrid film, (Fe2O3-CMC/(polyvinyl butyral, and the shape memory properties of the NiTi ribbon, which has a chemical composition of Ti-50.13 at. % Ni. This smart composite material has a mass of 18.3% NiTi ribbon and 81.7% magnetic hybrid film. Results obtained by DSC show that the smart composite material presents a small delay of transformation during warming and cooling because the magnetic hybrid film acts like a thermal insulator. Thermomechanical results indicate that the hybrid material also acts as a mechanical reinforcement, since it is observed that the Stress-Assisted Two-Way Memory Effect (SATWME of the smart composite is lower than the SATWME of the SMA ribbon. The density current values of phase transformations were clearly identified with a thermomechanical apparatus developed in our laboratory. Finally, displacements of the smart composite material in cantilever configuration are obtained by applying an external magnetic field. All these results demonstrate that the smart composite material can be activated by temperature, electrical current, stress, and/or magnetic field, offering good expectations for actuating applications with multiphysic transduction.

  14. Material and cooling requirements for poly-Bitter resistive magnets and hybrid inserts generating continuous fields up to 50 T

    Energy Technology Data Exchange (ETDEWEB)

    Gao, B.J.; Bird, M.D.; Eyssa, Y.M.; Schneider-Muntau, H.J. [National High Magnetic Field Lab., Tallahassee, FL (United States)

    1994-07-01

    The new National High Magnetic Field Laboratory (NHMFL), equipped with a 40 MW DC power supply, will design and construct the next generation of high field resistive magnets and hybrid inserts generating DC fields up to 50 T. The authors present a study on the required materials and the necessary cooling characteristics, these magnets need. The configuration selected for this study consists of a combination of thin poly-Bitter and thick Bitter coils optimized in dimensions and power under constraint of maximum design stress and heat removal to obtain maximum field. The study shows that each design requires a different optimum ratio of conductor strength to electrical conductivity and that efficient cooling is only advantageous if strong copper alloys are used. For efficient use of the available power the development of new high strength, high conductivity materials will be necessary. Equally important are improvements in the heat transfer characteristics of these high power density magnets.

  15. Shimming with permanent magnets for the x-ray detector in a hybrid x-ray/ MR system.

    Science.gov (United States)

    Wen, Zhifei; Fahrig, Rebecca; Williams, Scott T; Pelc, Norbert J

    2008-09-01

    In this x-ray/MR hybrid system an x-ray flat panel detector is placed under the patient cradle, close to the MR volume of interest (VOI), where the magnetic field strength is approximately 0.5 T. Immersed in this strong field, several electronic components inside the detector become magnetized and create an additional magnetic field that is superimposed on the original field of the MR scanner. Even after linear shimming, the field homogeneity of the MR scanner remains disrupted by the detector. The authors characterize the field due to the detector with the field of two magnetic dipoles and further show that two sets of permanent magnets (NdFeB) can withstand the main magnetic field and compensate for the nonlinear components of the additional field. The ideal number of magnets and their locations are calculated based on a field map measured with the detector in place. Experimental results demonstrate great promise for this technique, which may be useful in many settings where devices with magnetic components need to be placed inside or close to an MR scanner.

  16. Design and Mathematical Analysis of a Novel Reluctance Force-Type Hybrid Magnetic Bearing for Flywheel with Gimballing Capability

    Directory of Open Access Journals (Sweden)

    Chun'e Wang

    2013-01-01

    Full Text Available Magnetically suspended flywheel (MSFW with gimballing capability fulfills requirements of precision and maneuvers for space applications. A novel reluctance force-type hybrid magnetic bearing (RFHMB is presented based on analysis of demerits of Lorentz force-type magnetic bearing and common RFHMB. It features that radial and axial magnetic bearing units are integrated into a compact assembly with four separate biased permanent magnets and two conical stators; four radial poles with shoes and rotor made of iron-based amorphousness can reduce eddy loss. Equivalent magnetic circuits of permanent magnets and their control currents are presented. Simulation results indicate flux density fluctuates from 0.272 T to 0.41 T; rotor tilting does not affect the suspension force when rotor only tilts around X-axis or Y-axis. When rotor drifts in X, Y, or Z direction and tilts around X-axis or Y-axis simultaneously, force in corresponding directions slightly increases with tilting angle’s enlargement, but the maximum change does not exceed 14%. Additional tilting torque mainly determined by uniformity of flux density in conical air gaps is 0.05 Nm which is far smaller than 11 Nm in common RFHMB; magnetic suspension force is effectively decoupled among X, Y, and Z directions; results prove that MSFW with gimballing capability theoretically meets maneuvering requirement of spacecraft.

  17. Parameter estimation and actuator characteristics of hybrid magnetic bearings for axial flow blood pump applications.

    Science.gov (United States)

    Lim, Tau Meng; Cheng, Shanbao; Chua, Leok Poh

    2009-07-01

    Axial flow blood pumps are generally smaller as compared to centrifugal pumps. This is very beneficial because they can provide better anatomical fit in the chest cavity, as well as lower the risk of infection. This article discusses the design, levitated responses, and parameter estimation of the dynamic characteristics of a compact hybrid magnetic bearing (HMB) system for axial flow blood pump applications. The rotor/impeller of the pump is driven by a three-phase permanent magnet brushless and sensorless motor. It is levitated by two HMBs at both ends in five degree of freedom with proportional-integral-derivative controllers, among which four radial directions are actively controlled and one axial direction is passively controlled. The frequency domain parameter estimation technique with statistical analysis is adopted to validate the stiffness and damping coefficients of the HMB system. A specially designed test rig facilitated the estimation of the bearing's coefficients in air-in both the radial and axial directions. Experimental estimation showed that the dynamic characteristics of the HMB system are dominated by the frequency-dependent stiffness coefficients. By injecting a multifrequency excitation force signal onto the rotor through the HMBs, it is noticed in the experimental results the maximum displacement linear operating range is 20% of the static eccentricity with respect to the rotor and stator gap clearance. The actuator gain was also successfully calibrated and may potentially extend the parameter estimation technique developed in the study of identification and monitoring of the pump's dynamic properties under normal operating conditions with fluid.

  18. Testing of a centrifugal blood pump with a high efficiency hybrid magnetic bearing.

    Science.gov (United States)

    Locke, Dennis H; Swanson, Erik S; Walton, James F; Willis, John P; Heshmat, Hooshang

    2003-01-01

    The purpose of this article is to present test results for a second generation, high efficiency, nonpulsatile centrifugal blood pump that is being developed for use as a left ventricular assist device (LVAD). The LVAD pump uses a hybrid passive-active magnetic bearing support system that exhibits extremely low power loss, low vibration, and high reliability under transient conditions and varying pump orientations. A unique feature of the second generation design configuration is the very simple and direct flow path for both main and washing blood flows. The pump was tested in both vertical and horizontal orientations using a standard flow loop to demonstrate the performance and durability of the second generation LVAD. Steady state and transient orientation pump operating characteristics including pressure, flow, speed, temperatures, vibration, and rotor orientation were measured. During the tests, pump performance was mapped at several operating conditions including points above and below the nominal design of 5 L/min at 100 mm Hg pressure rise. Flow rates from 2 to 7 L/min and pressure rises from 50 to 150 mm Hg were measured. Pump speeds were varied during these tests from 2,500 to 3,500 rpm. The nominal design flow of 5 L/min at 100 mm Hg pressure rise was successfully achieved at the design speed of 3,000 rpm. After LVAD performance testing, both 28 day continuous duty and 5 day transient orientation durability tests were completed without incident. A hydrodynamic backup bearing design feasibility study was also conducted. Results from this design study indicate that an integral hydrodynamic backup bearing may be readily incorporated into the second generation LVAD and other magnetically levitated pump rotors.

  19. Self-assembled organic–inorganic magnetic hybrid adsorbent ferrite based on cyclodextrin nanoparticles

    Directory of Open Access Journals (Sweden)

    Ângelo M. L. Denadai

    2012-11-01

    Full Text Available Organic–inorganic magnetic hybrid materials (MHMs combine a nonmagnetic and a magnetic component by means of electrostatic interactions or covalent bonds, and notable features can be achieved. Herein, we describe an application of a self-assembled material based on ferrite associated with β-cyclodextrin (Fe-Ni/Zn/βCD at the nanoscale level. This MHM and pure ferrite (Fe-Ni/Zn were used as an adsorbent system for Cr3+ and Cr2O72− ions in aqueous solutions. Prior to the adsorption studies, both ferrites were characterized in order to determine the particle size distribution, morphology and available binding sites on the surface of the materials. Microscopy analysis demonstrated that both ferrites present two different size domains, at the micro- and nanoscale level, with the latter being able to self-assemble into larger particles. Fe-Ni/Zn/βCD presented smaller particles and a more homogeneous particle size distribution. Higher porosity for this MHM compared to Fe-Ni/Zn was observed by Brunauer–Emmett–Teller isotherms and positron-annihilation-lifetime spectroscopy. Based on the pKa values, potentiometric titrations demonstrated the presence of βCD in the inorganic matrix, indicating that the lamellar structures verified by transmission electronic microscopy can be associated with βCD assembled structures. Colloidal stability was inferred as a function of time at different pH values, indicating the sedimentation rate as a function of pH. Zeta potential measurements identified an amphoteric behavior for the Fe-Ni/Zn/βCD, suggesting its better capability to remove ions (cations and anions from aqueous solutions compared to that of Fe-Ni/Zn.

  20. Jovian plasma torus interaction with Europa. Plasma wake structure and effect of inductive magnetic field: 3D Hybrid kinetic simulation

    CERN Document Server

    Lipatov, A S; Paterson, W R; Sittler, E C; Hartle, R E; Simpson, D G

    2012-01-01

    The hybrid kinetic model supports comprehensive simulation of the interaction between different spatial and energetic elements of the Europa moon-magnetosphere system with respect a to variable upstream magnetic field and flux or density distributions of plasma and energetic ions, electrons, and neutral atoms. This capability is critical for improving the interpretation of the existing Europa flyby measurements from the Galileo Orbiter mission, and for planning flyby and orbital measurements (including the surface and atmospheric compositions) for future missions. The simulations are based on recent models of the atmosphere of Europa (Cassidy et al., 2007; Shematovich et al., 2005). In contrast to previous approaches with MHD simulations, the hybrid model allows us to fully take into account the finite gyroradius effect and electron pressure, and to correctly estimate the ion velocity distribution and the fluxes along the magnetic field (assuming an initial Maxwellian velocity distribution for upstream backgr...

  1. Spin Seebeck effect and thermoelectric phenomena in superconducting hybrids with magnetic textures or spin-orbit coupling

    Science.gov (United States)

    Bathen, Marianne Etzelmüller; Linder, Jacob

    2017-01-01

    We theoretically consider the spin Seebeck effect, the charge Seebeck coefficient, and the thermoelectric figure of merit in superconducting hybrid structures including either magnetic textures or intrinsic spin-orbit coupling. We demonstrate that large magnitudes for all these quantities are obtainable in Josephson-based systems with either zero or a small externally applied magnetic field. This provides an alternative to the thermoelectric effects generated in high-field (~1 T) superconducting hybrid systems, which were recently experimentally demonstrated. The systems studied contain either conical ferromagnets, spin-active interfaces, or spin-orbit coupling. We present a framework for calculating the linear thermoelectric response for both spin and charge of a system upon applying temperature and voltage gradients based on quasiclassical theory which allows for arbitrary spin-dependent textures and fields to be conveniently incorporated.

  2. Magnetic characterisation of large grain, bulk Y-Ba-Cu-O superconductor-soft ferromagnetic alloy hybrid structures

    Science.gov (United States)

    Philippe, M. P.; Fagnard, J.-F.; Kirsch, S.; Xu, Z.; Dennis, A. R.; Shi, Y.-H.; Cardwell, D. A.; Vanderheyden, B.; Vanderbemden, P.

    2014-07-01

    Large grain, bulk Y-Ba-Cu-O (YBCO) high temperature superconductors (HTS) have significant potential for use in a variety of practical applications that incorporate powerful quasi-permanent magnets. In the present work, we investigate how the trapped field of such magnets can be improved by combining bulk YBCO with a soft FeNi, ferromagnetic alloy. This involves machining the alloy into components of various shapes, such as cylinders and rings, which are attached subsequently to the top surface of a solid, bulk HTS cylinder. The effect of these modifications on the magnetic hysteresis curve and trapped field of the bulk superconductor at 77 K are then studied using pick-up coil and Hall probe measurements. The experimental data are compared to finite element modelling of the magnetic flux distribution using Campbell’s algorithm. Initially we establish the validity of the technique involving pick-up coils wrapped around the bulk superconductor to obtain its magnetic hysteresis curve in a non-destructive way and highlight the difference between the measured signal and the true magnetization of the sample. We then consider the properties of hybrid ferromagnet/superconductor (F/S) structures. Hall probe measurements, together with the results of the model, establish that flux lines curve outwards through the ferromagnet, which acts, effectively, like a magnetic short circuit. Magnetic hysteresis curves show that the effects of the superconductor and the ferromagnet simply add when the ferromagnet is saturated fully by the applied field. The trapped field of the hybrid structure is always larger than that of the superconductor alone below this saturation level, and especially when the applied field is removed. The results of the study show further that the beneficial effects on the trapped field are enhanced when the ferromagnet covers the entire surface of the superconductor for different ferromagnetic components of various shapes and fixed volume.

  3. Design and Manufacture of 20 kA HTS Current Leads for a Hybrid Magnet System

    Science.gov (United States)

    Wesche, R.; Bruzzone, P.; March, S.; Vogel, M.; Ehmler, H.; Smeibidl, P.

    A new series connected 25 T hybrid magnet system is being developed by the Helmholtz Zentrum Berlin (HZB) for neutron scattering experiments. In collaboration with CRPP, high temperature superconducting (HTS) current leads have been developed for the powering of the outer superconducting coil. These HTS current leads, with a nominal current rating of 20 kA, have been designed and are being manufactured by CRPP, based on the design of the 18 kA EDIPO leads. Each of the two current leads consists of an HTS module cooled only by heat conduction from the cold end and a copper part actively cooled by helium gas of 44 K inlet temperature. To reach a temperature of 53.7 K at the warm end of the HTS a helium mass flow rate of 1.37 g/s per lead is required at a current of 20 kA. The estimated heat leak at the 4.5 K level caused only by heat conduction is as low as 1.4 W. The evolution of the temperatures in the case of a loss of flow has been calculated. In addition to the design, the main fabrication steps are described.

  4. Dressed topological insulators. Rashba impurity, Kondo effect, magnetic impurities, proximity-induced superconductivity, hybrid systems

    Energy Technology Data Exchange (ETDEWEB)

    Posske, Thore Hagen

    2016-02-26

    Topological insulators are electronic phases that insulate in the bulk and accommodate a peculiar, metallic edge liquid with a spin-dependent dispersion. They are regarded to be of considerable future use in spintronics and for quantum computation. Besides determining the intrinsic properties of this rather novel electronic phase, considering its combination with well-known physical systems can generate genuinely new physics. In this thesis, we report on such combinations including topological insulators. Specifically, we analyze an attached Rashba impurity, a Kondo dot in the two channel setup, magnetic impurities on the surface of a strong three-dimensional topological insulator, the proximity coupling of the latter system to a superconductor, and hybrid systems consisting of a topological insulator and a semimetal. Let us summarize our primary results. Firstly, we determine an analytical formula for the Kondo cloud and describe its possible detection in current correlations far away from the Kondo region. We thereby rely on and extend the method of refermionizable points. Furthermore, we find a class of gapless topological superconductors and semimetals, which accommodate edge states that behave similarly to the ones of globally gapped topological phases. Unexpectedly, we also find edge states that change their chirality when affected by sufficiently strong disorder. We regard the presented research helpful in future classifications and applications of systems containing topological insulators, of which we propose some examples.

  5. Superconductivity-induced magnetization depletion in a ferromagnet through an insulator in a ferromagnet-insulator-superconductor hybrid oxide heterostructure.

    Science.gov (United States)

    Prajapat, C L; Singh, Surendra; Paul, Amitesh; Bhattacharya, D; Singh, M R; Mattauch, S; Ravikumar, G; Basu, S

    2016-05-21

    Coupling between superconducting and ferromagnetic states in hybrid oxide heterostructures is presently a topic of intense research. Such a coupling is due to the leakage of the Cooper pairs into the ferromagnet. However, tunneling of the Cooper pairs though an insulator was never considered plausible. Using depth sensitive polarized neutron reflectivity we demonstrate the coupling between superconductor and magnetic layers in epitaxial La2/3Ca1/3MnO3 (LCMO)/SrTiO3/YBa2Cu3O7-δ (YBCO) hybrid heterostructures, with SrTiO3 as an intervening oxide insulator layer between the ferromagnet and the superconductor. Measurements above and below the superconducting transition temperature (TSC) of YBCO demonstrate a large modulation of magnetization in the ferromagnetic layer below the TSC of YBCO in these heterostructures. This work highlights a unique tunneling phenomenon between the epitaxial layers of an oxide superconductor (YBCO) and a magnetic layer (LCMO) through an insulating layer. Our work would inspire further investigations on the fundamental aspect of a long range order of the triplet spin-pairing in hybrid structures.

  6. Resonant photoluminescence and dynamics of a hybrid Mn hole spin in a positively charged magnetic quantum dot

    Science.gov (United States)

    Lafuente-Sampietro, A.; Boukari, H.; Besombes, L.

    2017-06-01

    We analyze, through resonant photoluminescence, the spin dynamics of an individual magnetic atom (Mn) coupled to a hole in a semiconductor quantum dot. The hybrid Mn hole spin and the positively charged exciton in a CdTe/ZnTe quantum dot form an ensemble of Λ systems which can be addressed optically. Autocorrelation of the resonant photoluminescence and resonant optical pumping experiments are used to study the spin relaxation channels in this multilevel spin system. We identified for the hybrid Mn hole spin an efficient relaxation channel driven by the interplay of the Mn hole exchange interaction and the coupling to acoustic phonons. We also show that the optical Λ systems are connected through inefficient spin flips than can be enhanced under weak transverse magnetic field. The dynamics of the resonant photoluminescence in a p -doped magnetic quantum dot is well described by a complete rate equation model. Our results suggest that long-lived hybrid Mn hole spin could be obtained in quantum dot systems with large heavy-hole/light-hole splitting.

  7. Superconductivity-induced magnetization depletion in a ferromagnet through an insulator in a ferromagnet-insulator-superconductor hybrid oxide heterostructure

    Science.gov (United States)

    Prajapat, C. L.; Singh, Surendra; Paul, Amitesh; Bhattacharya, D.; Singh, M. R.; Mattauch, S.; Ravikumar, G.; Basu, S.

    2016-05-01

    Coupling between superconducting and ferromagnetic states in hybrid oxide heterostructures is presently a topic of intense research. Such a coupling is due to the leakage of the Cooper pairs into the ferromagnet. However, tunneling of the Cooper pairs though an insulator was never considered plausible. Using depth sensitive polarized neutron reflectivity we demonstrate the coupling between superconductor and magnetic layers in epitaxial La2/3Ca1/3MnO3 (LCMO)/SrTiO3/YBa2Cu3O7-δ (YBCO) hybrid heterostructures, with SrTiO3 as an intervening oxide insulator layer between the ferromagnet and the superconductor. Measurements above and below the superconducting transition temperature (TSC) of YBCO demonstrate a large modulation of magnetization in the ferromagnetic layer below the TSC of YBCO in these heterostructures. This work highlights a unique tunneling phenomenon between the epitaxial layers of an oxide superconductor (YBCO) and a magnetic layer (LCMO) through an insulating layer. Our work would inspire further investigations on the fundamental aspect of a long range order of the triplet spin-pairing in hybrid structures.

  8. Magnetic order in hybrid frustrated magnets Gd2-xTbxTi2O7 (x = 0.2 and 0.5)

    Science.gov (United States)

    Orendáč, M.; Vrábel, P.; Orendáčová, A.; Prokleška, J.; Sechovský, V.; Singh, S.; Suryanarayanan, R.; Revcolevschi, A.

    2012-05-01

    We report on the specific heat, magnetization and ac susceptibility measurements of single crystals of hybrid frustrated magnets Gd1.8Tb0.2Ti2O7 and Gd1.5Tb0.5Ti2O7. The analysis of experimental data revealed that, although partial replacing of the Gd3+ ions by the Tb3+ ions in the Gd2Ti2O7 host lattice slightly enhances antiferromagnetic coupling, as inferred from the evolution of the paramagnetic Curie-Weiss temperature, the ordering temperature gradually decreases. Paramagnetic correlations introduced by the Tb3+ ions cause this perturbation, altering the effective further neighbor interactions and destabilizing the ground state in Gd2Ti2O7. In addition, the low-energy states of Gd2-xTbxTi2O7 are suggested to possess a nature different from those in parent members Tb2Ti2O7 and Gd2Ti2O7. Finally, the frequency-dependent magnetic susceptibility behavior in Gd1.5Tb0.5Ti2O7 is consistent with the formation of a spin-glass-like state indicating a pronounced slowing down of the dynamical response of the studied hybrid magnets.

  9. Cyto/hemocompatible magnetic hybrid nanoparticles (Ag2S-Fe3O4) with luminescence in the near-infrared region as promising theranostic materials.

    Science.gov (United States)

    Hocaoglu, Ibrahim; Asik, Didar; Ulusoy, Gulen; Grandfils, Christian; Ojea-Jimenez, Isaac; Rossi, François; Kiraz, Alper; Doğan, Nurcan; Acar, Havva Yagci

    2015-09-01

    Small hybrid nanoparticles composed of highly biocompatible Ag2S quantum dots (QD) emitting in the near-infrared region and superparamagnetic iron oxide (SPION) are produced in a simple extraction method utilizing ligand exchange mechanism. Hybrid nanoparticles luminesce at the same wavelength as the parent QD, therefore an array of hybrid nanoparticles with emission between 840 and 912nm were easily produced. Such hybrid structures have (1) strong luminescence in the medical imaging window eliminating the autofluoresence of cells as effective optical probes, (2) strong magnetic response for magnetic targeting and (3) good cyto/hemocompatibility. An interesting size dependent cytotoxicity behavior was observed in HeLa and NIH/3T3 cell lines: smallest particles are internalized significantly more by both of the cell lines, yet showed almost no significant cytotoxicity in HeLa between 10 and 25μg/mL Ag concentration but were most toxic in NIH/3T3 cells. Cell internalization and hence the cytotoxicity enhanced when cells were incubated with the hybrid nanoparticles under magnetic field, especially with the hybrid nanoparticles containing larger amounts of SPION in the hybrid composition. These results prove them as effective optical imaging agents and magnetic delivery vehicles. Combined with the known advantages of SPIONs as a contrast agent in MRI, these particles are a step forward for new theranostics for multimode imaging and magnetic targeting.

  10. Helicity-dependent all-optical switching in hybrid metal-ferromagnet structures for ultrafast magnetic data storage

    Science.gov (United States)

    Cheng, Feng

    The emerging Big Data era demands the rapidly increasing need for speed and capacity of storing and processing information. Standalone magnetic recording devices, such as hard disk drives (HDDs), have always been playing a central role in modern data storage and continuously advancing. Recognizing the growing capacity gap between the demand and production, industry has pushed the bit areal density in HDDs to 900 Giga-bit/square-inch, a remarkable 450-million-fold increase since the invention of the first hard disk drive in 1956. However, the further development of HDD capacity is facing a pressing challenge, the so-called superparamagnetic effect, that leads to the loss of information when a single bit becomes too small to preserve the magnetization. This requires new magnetic recording technologies that can write more stable magnetic bits into hard magnetic materials. Recent research has shown that it is possible to use ultrafast laser pulses to switch the magnetization in certain types of magnetic thin films. Surprisingly, such a process does not require an externally applied magnetic field that always exists in conventional HDDs. Furthermore, the optically induced magnetization switching is extremely fast, up to sub-picosecond (10 -12 s) level, while with traditional recording method the deterministic switching does not take place shorter than 20 ps. It's worth noting that the direction of magnetization is related to the helicity of the incident laser pulses. Namely, the right-handed polarized laser pulses will generate magnetization pointing in one direction while left-handed polarized laser pulses generate magnetization pointing in the other direction. This so-called helicity-dependent all-optical switching (HD-AOS) phenomenon can be potentially used in the next-generation of magnetic storage systems. In this thesis, I explore the HD-AOS phenomenon in hybrid metal-ferromagnet structures, which consist of gold and Co/Pt multilayers. The experiment results show

  11. Hybrid magnetic amphiphilic composites based on carbon nanotube/nanofibers and layered silicates fragments as efficient adsorbent for ethynilestradiol.

    Science.gov (United States)

    Purceno, Aluir D; Teixeira, Ana Paula C; de Souza, Nubia Janaína; Fernandez-Outon, Luis E; Ardisson, José D; Lago, Rochel M

    2012-08-01

    In this work, hybrid magnetic amphiphilic composites were prepared by the catalytic growth of carbon nanotubes (CNTs) and nanofibers CNF on layered silicates fragments. SEM, TEM, Raman, XRD, Mössbauer, TG/DTA showed that CVD with CH(4) at 800°C produced CNF and magnetic Fe cores fixed on the surface of microfragments of silicates layers. Due to the amphiphilic character, the composites can be easily dispersed in water and efficiently adsorb hydrophobic contaminant molecules. For example, the composites showed remarkable adsorption capacities for the hormone ethinylestradiol, e.g. 2-4 mg m(-2), compared to ca. 0.1 mg m(-2) obtained for high surface area activated carbon and multiwall CNT. These results are discussed in terms of a high hydrophobic exposed surface area of the CNT and CNF fixed on the layered silicates fragments surface. Moreover, the composites can be easily removed from water by a simple magnetic separation process.

  12. Sol-gel-derived Hybrid Conductive Films for Electro magnetic Interference (EMI) Shielding

    Institute of Scientific and Technical Information of China (English)

    XIE Jiyuan; GUO Wenfeng; WANG Jianzhong

    2011-01-01

    The conductive nano-sized zinc particles were embedded in an insulating amorphous silica matrix, and the hybrid films were obtained by a sol-gel method. The stable hybrid sol solution was prepared by hydrolysis and condensation of Methyltrimethoxysilane (MTMS) with a one-step acidic catalyst process. Hybrid films were dip-coated on silicon wafer and cured at 120 ℃ for 60minutes. The structural characterization of hybrid films were investigated by means of attenuated total reflection infrared (ATR-IR) spectroscopy and X-ray diffraetion (XRD). The electrical properties of the films were examined with four-point probe. Hybrid films showed to be relatively dense, uniform and defect free. The conductivity of hybrid films was varied with the different contents of zinc nanoparticles and the thickness of the film. It was observed that there was the percolation threshold for the film's electrical properties.

  13. Jovian Plasmas Torus Interaction with Europa. Plasma Wake Structure and Effect of Inductive Magnetic Field: 3D Hybrid Kinetic Simulation

    Science.gov (United States)

    Lipatov, A. S.; Cooper, J F.; Paterson, W. R.; Sittler, E. C., Jr.; Hartle, R. E.; Simpson, David G.

    2013-01-01

    The hybrid kinetic model supports comprehensive simulation of the interaction between different spatial and energetic elements of the Europa moon-magnetosphere system with respect to a variable upstream magnetic field and flux or density distributions of plasma and energetic ions, electrons, and neutral atoms. This capability is critical for improving the interpretation of the existing Europa flyby measurements from the Galileo Orbiter mission, and for planning flyby and orbital measurements (including the surface and atmospheric compositions) for future missions. The simulations are based on recent models of the atmosphere of Europa (Cassidy et al., 2007; Shematovich et al., 2005). In contrast to previous approaches with MHD simulations, the hybrid model allows us to fully take into account the finite gyroradius effect and electron pressure, and to correctly estimate the ion velocity distribution and the fluxes along the magnetic field (assuming an initial Maxwellian velocity distribution for upstream background ions). Photoionization, electron-impact ionization, charge exchange and collisions between the ions and neutrals are also included in our model. We consider the models with Oþ þ and Sþ þ background plasma, and various betas for background ions and electrons, and pickup electrons. The majority of O2 atmosphere is thermal with an extended non-thermal population (Cassidy et al., 2007). In this paper, we discuss two tasks: (1) the plasma wake structure dependence on the parameters of the upstream plasma and Europa's atmosphere (model I, cases (a) and (b) with a homogeneous Jovian magnetosphere field, an inductive magnetic dipole and high oceanic shell conductivity); and (2) estimation of the possible effect of an induced magnetic field arising from oceanic shell conductivity. This effect was estimated based on the difference between the observed and modeled magnetic fields (model II, case (c) with an inhomogeneous Jovian magnetosphere field, an inductive

  14. 50 CFR 14.107 - Conveyance.

    Science.gov (United States)

    2010-10-01

    ..., EXPORTATION, AND TRANSPORTATION OF WILDLIFE Standards for the Humane and Healthful Transport of Wild Mammals... transport wild mammals or birds to the United States shall be designed, constructed, and maintained so as to... maintained so as to prevent the harmful ingress of engine exhaust fumes and gases produced by the conveyance...

  15. A Novel Integrated Magnetic Structure Based DC/DC Converter for Hybrid Battery/Ultracapacitor Energy Storage Systems

    Energy Technology Data Exchange (ETDEWEB)

    Onar, Omer C [ORNL

    2012-01-01

    This manuscript focuses on a novel actively controlled hybrid magnetic battery/ultracapacitor based energy storage system (ESS) for vehicular propulsion systems. A stand-alone battery system might not be sufficient to satisfy peak power demand and transient load variations in hybrid and plug-in hybrid electric vehicles (HEV, PHEV). Active battery/ultracapacitor hybrid ESS provides a better solution in terms of efficient power management and control flexibility. Moreover, the voltage of the battery pack can be selected to be different than that of the ultracapacitor, which will result in flexibility of design as well as cost and size reduction of the battery pack. In addition, the ultracapacitor bank can supply or recapture a large burst of power and it can be used with high C-rates. Hence, the battery is not subjected to supply peak and sharp power variations, and the stress on the battery will be reduced and the battery lifetime would be increased. Utilizing ultracapacitor results in effective capturing of the braking energy, especially in sudden braking conditions.

  16. Hybrid metal-dielectric ring resonators for homogenizable optical metamaterials with strong magnetic response at short wavelengths down to the ultraviolet range.

    Science.gov (United States)

    Tang, Jianwei; He, Sailing

    2013-10-07

    We derive an analytical LC model from Maxwell's equations for the magnetic resonance of subwavelength ring resonators. Using the LC model, we revisit the scaling of split-ring resonators. Inspired by the LC model, we propose a hybrid metal-dielectric ring resonator mainly composed of high index dielectric material (e.g., TiO₂) with some gaps filled with metal (e.g., Ag). The saturation frequency of magnetic response for the hybrid metal-dielectric ring resonator is much higher (up to the ultraviolet range) than that for split-ring resonators, and can be controlled by the metal fraction in the ring. The hybrid metal-dielectric ring resonator can also overcome the homogenization problem of all-dielectric magnetic resonators, and therefore can form homogenizable magnetic metamaterials at short wavelengths down to the ultraviolet range.

  17. Parametric decay instability near the upper hybrid resonance in magnetically confined fusion plasmas

    DEFF Research Database (Denmark)

    Hansen, Søren Kjer; Nielsen, Stefan Kragh; Salewski, Mirko

    2017-01-01

    In this paper we investigate parametric decay of an electromagnetic pump wave into two electrostatic daughter waves, particularly an X-mode pump wave decaying into a warm upper hybrid wave (a limit of an electron Bernstein wave) and a warm lower hybrid wave. We describe the general theory...

  18. Magnetic particle-based sandwich sensor with DNA-modified carbon nanotubes as recognition elements for detection of DNA hybridization.

    Science.gov (United States)

    Hu, Po; Huang, Cheng Zhi; Li, Yuan Fang; Ling, Jian; Liu, Yu Ling; Fei, Liang Run; Xie, Jian Ping

    2008-03-01

    In this contribution, we design a visual sensor for DNA hybridization with DNA probe-modified magnetic particles (MPs) and multiwalled carbon nanotubes (MWNTs) without involving a visual recognition element such as fluorescent/chemiluminescent reagents. It was found that DNA probe-modified MWNTs, which could be dispersed in aqueous medium and have strong light scattering signals under the excitation of a light beam in the UV-vis region, could connect with DNA probe-modified MPs together in the presence of perfectly complementary target DNA and form a sandwich structure. In a magnetic field, the formed MP-MWNT species can easily be removed from the solution, resulting in a decrease of light scattering signals. Thus, a magnetic particle-based sandwich sensor could be developed to detect DNA hybridization by measuring the light scattering signals with DNA-modified MWNTs as recognition elements. Experiments showed that the DNA-modified MPs sensor could be reused at least 17 times and was stable for more than 6 months.

  19. Research on the filtering characteristic of single phase series hybrid active power filter based on fundamental magnetic flux compensation

    Science.gov (United States)

    Tian, Jun; Chen, Qiaofu; Zhang, Yuqi

    2012-12-01

    In this article, the PWM inverter works as a controlled fundamental current source in the single phase series hybrid active power filter (APF) based on fundamental magnetic flux compensation (FMFC). The series transformer can exhibit the self-impedance of primary winding to harmonic current, which forces harmonic current to flow into passive power filter. With the influence of harmonic current, the voltage of primary winding of transformer is a harmonic voltage, which makes the inverter output currents have a certain harmonic component, and it degrades the filtering characteristics. On the basis of PWM inverter, the mathematical model of series hybrid APF is established, and the filtering characteristics of single phase APF are analysed in detail. Three methods are gained to improve filtering characteristics: reasonably designing the inverter output filter inductance, increasing series transformer ratio and adopting voltage feed-forward control. Experimental results show that the proposed APF has greater validity.

  20. Estimation of Curie temperature of manganite-based materials for magnetic refrigeration application using hybrid gravitational based support vector regression

    Science.gov (United States)

    Owolabi, Taoreed O.; Akande, Kabiru O.; Olatunji, Sunday O.; Alqahtani, Abdullah; Aldhafferi, Nahier

    2016-10-01

    Magnetic refrigeration (MR) technology stands a good chance of replacing the conventional gas compression system (CGCS) of refrigeration due to its unique features such as high efficiency, low cost as well as being environmental friendly. Its operation involves the use of magnetocaloric effect (MCE) of a magnetic material caused by application of magnetic field. Manganite-based material demonstrates maximum MCE at its magnetic ordering temperature known as Curie temperature (TC). Consequently, manganite-based material with TC around room temperature is essentially desired for effective utilization of this technology. The TC of manganite-based materials can be adequately altered to a desired value through doping with appropriate foreign materials. In order to determine a manganite with TC around room temperature and to circumvent experimental challenges therein, this work proposes a model that can effectively estimates the TC of manganite-based material doped with different materials with the aid of support vector regression (SVR) hybridized with gravitational search algorithm (GSA). Implementation of GSA algorithm ensures optimum selection of SVR hyper-parameters for improved performance of the developed model using lattice distortions as the descriptors. The result of the developed model is promising and agrees excellently with the experimental results. The outstanding estimates of the proposed model suggest its potential in promoting room temperature magnetic refrigeration through quick estimation of the effect of dopants on TC so as to obtain manganite that works well around the room temperature.

  1. Estimation of Curie temperature of manganite-based materials for magnetic refrigeration application using hybrid gravitational based support vector regression

    Directory of Open Access Journals (Sweden)

    Taoreed O. Owolabi

    2016-10-01

    Full Text Available Magnetic refrigeration (MR technology stands a good chance of replacing the conventional gas compression system (CGCS of refrigeration due to its unique features such as high efficiency, low cost as well as being environmental friendly. Its operation involves the use of magnetocaloric effect (MCE of a magnetic material caused by application of magnetic field. Manganite-based material demonstrates maximum MCE at its magnetic ordering temperature known as Curie temperature (TC. Consequently, manganite-based material with TC around room temperature is essentially desired for effective utilization of this technology. The TC of manganite-based materials can be adequately altered to a desired value through doping with appropriate foreign materials. In order to determine a manganite with TC around room temperature and to circumvent experimental challenges therein, this work proposes a model that can effectively estimates the TC of manganite-based material doped with different materials with the aid of support vector regression (SVR hybridized with gravitational search algorithm (GSA. Implementation of GSA algorithm ensures optimum selection of SVR hyper-parameters for improved performance of the developed model using lattice distortions as the descriptors. The result of the developed model is promising and agrees excellently with the experimental results. The outstanding estimates of the proposed model suggest its potential in promoting room temperature magnetic refrigeration through quick estimation of the effect of dopants on TC so as to obtain manganite that works well around the room temperature.

  2. Magnetic characterisation of large grain, bulk Y–Ba–Cu–O superconductor–soft ferromagnetic alloy hybrid structures

    Energy Technology Data Exchange (ETDEWEB)

    Philippe, M.P., E-mail: M.Philippe@ulg.ac.be [SUPRATECS and Department of Electrical Engineering and Computer Science (B28), University of Liège, 4000 Liège (Belgium); Fagnard, J.-F.; Kirsch, S. [SUPRATECS and Department of Electrical Engineering and Computer Science (B28), University of Liège, 4000 Liège (Belgium); Xu, Z.; Dennis, A.R.; Shi, Y.-H.; Cardwell, D.A. [Bulk Superconductivity Group, Engineering Department, University of Cambridge, Cambridge CB2 1PZ (United Kingdom); Vanderheyden, B.; Vanderbemden, P. [SUPRATECS and Department of Electrical Engineering and Computer Science (B28), University of Liège, 4000 Liège (Belgium)

    2014-07-15

    Highlights: • Large grain, bulk YBaCuO superconductor (SC) combined with ferromagnetic elements. • The flux lines curve outwards through the ferromagnet in the remanent state. • The trapped field in the SC is enhanced by the presence of the ferromagnet. • The effects of the SC and the ferromagnet add when the ferromagnet is saturated. - Abstract: Large grain, bulk Y–Ba–Cu–O (YBCO) high temperature superconductors (HTS) have significant potential for use in a variety of practical applications that incorporate powerful quasi-permanent magnets. In the present work, we investigate how the trapped field of such magnets can be improved by combining bulk YBCO with a soft FeNi, ferromagnetic alloy. This involves machining the alloy into components of various shapes, such as cylinders and rings, which are attached subsequently to the top surface of a solid, bulk HTS cylinder. The effect of these modifications on the magnetic hysteresis curve and trapped field of the bulk superconductor at 77 K are then studied using pick-up coil and Hall probe measurements. The experimental data are compared to finite element modelling of the magnetic flux distribution using Campbell’s algorithm. Initially we establish the validity of the technique involving pick-up coils wrapped around the bulk superconductor to obtain its magnetic hysteresis curve in a non-destructive way and highlight the difference between the measured signal and the true magnetization of the sample. We then consider the properties of hybrid ferromagnet/superconductor (F/S) structures. Hall probe measurements, together with the results of the model, establish that flux lines curve outwards through the ferromagnet, which acts, effectively, like a magnetic short circuit. Magnetic hysteresis curves show that the effects of the superconductor and the ferromagnet simply add when the ferromagnet is saturated fully by the applied field. The trapped field of the hybrid structure is always larger than that of the

  3. Two Contemporary Problems in Magnetized Plasmas: the ion-ion hybrid resonator and MHD stability in a snowflake divertor

    Energy Technology Data Exchange (ETDEWEB)

    Farmer, William Anthony [Univ. of California, Los Angeles, CA (United States)

    2014-01-01

    The rst part of the dissertation investigates the e ects of multiple-ions on the propagation of shear Alfv en waves. It is shown that the presence of a second ion-species allows for the formation of an ion-ion hybrid resonator in the presence of a magnetic well. A fullwave description is shown to explain the measured eigenfrequencies and spatial form of the resonator modes identi ed in experiments in the Large Plasma Device (LAPD) at UCLA. However, it is determined that neither electron collisions or radial convection of the mode due to coupling to either the compressional or ion-Bernstein wave can explain the observed dissipation.

  4. Redox-active organometallics: magnetic and electronic couplings through carbon-silicon hybrid molecular connectors.

    Science.gov (United States)

    Hamon, Paul; Justaud, Frederic; Cador, Olivier; Hapiot, Philippe; Rigaut, Stéphane; Toupet, Loïc; Ouahab, Lahcène; Stueger, Harald; Hamon, Jean-René; Lapinte, Claude

    2008-12-24

    Treatment of the triflate complex Cp*(dppe)FeOTf [12; Cp* = eta(5)-C(5)(CH(3))(5), dppe = 1,2-bis(diphenylphosphino)ethane, OTf = CF(3)SO(3)] with an excess of HC[triple bond]C-(Si(CH(3))(2))(x)-C[triple bond]CH (x = 2-4) in diethyl ether provides the binuclear bis(vinylidene) derivatives [Cp*(dppe)Fe=C=CH(Si(CH(3))(2))(x)CH=C=Fe(dppe)Cp*][OTf](2) (x = 2, 13; x = 3, 14; x = 4, 15), which were isolated as ochre solids and rapidly characterized by FT-IR, (1)H, (31)P, and (13)C NMR spectroscopies. The complexes 13-15 were reacted with potassium tert-butoxide to afford the bis(alkynediyl) complexes [Cp*(dppe)Fe-C[triple bond]C(Si(CH(3))(2))(x)C[triple bond]C-Fe(dppe)Cp*] (x = 2, 1; x = 3, 2; x = 4, 3), which were isolated as orange powders in yields ranging from 76 to 91%. The IR, cyclic voltammetry, and UV-vis data obtained for 1-3 and the X-ray crystal structures determined for 1 and 3 reveal the importance of the sigma-pi conjugation (hyperconjugation) between the Si-Si sigma bond and the adjacent C[triple bond]C pi-symmetric orbitals in the description of the electronic structure of the ground state of these complexes. When reacted at low temperature with 2 equiv of [(C(5)H(5))(2)Fe]X or AgX [X = BPh(4), B(3,5-(CF(3))(2)C(6)H(3))(4))], compounds 1-3 provide 1[X](2), 2[X](2), and 3[X](2), which can be isolated and stored below -20 degrees C. EPR spectroscopy and magnetization measurements established that the superexchange interaction propagates through the Si-Si bonds (J = -0.97(2) cm(-1) for 3[X](2)). UV-vis-near-IR spectra were obtained with an optically transparent thin-layer electrosynthetic (OTTLE) cell for 1-3[OTf](n) (n = 0-2). A band with a maximum that increases from 6400 cm(-1) (1[OTf]) to 8500 cm(-1) (3[OTf]) observed for the mixed-valence species was ascribed to intervalence charge transfer evidencing photodriven electron transfer through the carbon-silicon hybrid connectors with H(ab) parameters ranging from 64 to 285 cm(-1).

  5. 新型混合径向磁轴承结构及其磁力特性%Structure and magnetic characteristics of novel hybrid radial magnetic bearing

    Institute of Scientific and Technical Information of China (English)

    陈君辉; 杨逢瑜; 聂朝瑞; 李正贵; 杨军; 王鹏雁

    2012-01-01

    Aimed at some problems in the permanent magnetic circuit of available magnetic radial bearings with permanent magnet bias such as small magnetic force, low magnetic flux density, and lack of self-stabilization. A new hybrid radial magnetic bearing structure for vertical axial flow pump was proposed. The nonlinear model and linearization equation of the bearing capacity of the new hybrid radial magnetic bearing were established by using current molecular method and virtual displacement theorem. It was found by a-nalysis that with this permanent magnetic suspension bearing, its self-stabilization would exhibit in some radial degrees of freedom and the total displacement negative stiffness of the system could be reduced. The investigation result showed that the air gap flux density was greatly improved with the new hybrid magnetic bearing when Halbach array structure was used. Current stiffness and displacement rigidity were closely related to initial current and initial gap at the equilibrium position. Around the equilibrium position, the variation of current stiffness and displacement rigidity was linear. With the increase of air gap, its linearity was well kept. With the decrease of air gap, however, a certain nonlinear characteristics exhibited.%针对当前永磁偏置径向磁轴承的永磁磁路的磁通密度低,磁力小,缺乏自稳定的问题,提出一种应用于立式轴流泵的新型混合径向磁轴承结构.应用分子电流法及虚位移定理建立新型混合径向磁轴承承载力的非线性模型及其线性化方程,分析得出新型径向混合磁悬浮轴承在径向某个自由度上具有自稳定的特点,且水磁轴承可以减小系统总的位移负刚度.研究结果表明,采用Halbach阵列结构后,混合磁轴承气隙的磁通密得到很大提高.电流刚度和位移刚度与平衡点的初始电流及初始间隙密切相关,在平衡位置附近电流刚度和位移刚度呈线性变化,当气隙增大时仍保

  6. Multi-responsive hybrid particles: thermo-, pH-, photo-, and magneto-responsive magnetic hydrogel cores with gold nanorod optical triggers

    Science.gov (United States)

    Rittikulsittichai, Supparesk; Kolhatkar, Arati G.; Sarangi, Subhasis; Vorontsova, Maria A.; Vekilov, Peter G.; Brazdeikis, Audrius; Randall Lee, T.

    2016-06-01

    The research strategy described in this manuscript harnesses the attractive properties of hydrogels, gold nanorods (Aurods), and magnetic nanoparticles (MNPs) by synthesizing one unique multi-responsive nanostructure. This novel hybrid structure consists of silica-coated magnetic particles encapsulated within a thermo-responsive P(NIPAM-co-AA) hydrogel network on which Aurods are assembled. Furthermore, this research demonstrates that these composite particles respond to several forms of external stimuli (temperature, pH, light, and/or applied magnetic field) owing to their specific architecture. Exposure of the hybrid particles to external stimuli led to a systematic and reversible variation in the hydrodynamic diameter (swelling-deswelling) and thus in the optical properties of the hybrid particles (red-shifting of the plasmon band). Such stimuli-responsive volume changes can be effectively exploited in drug-delivery applications.The research strategy described in this manuscript harnesses the attractive properties of hydrogels, gold nanorods (Aurods), and magnetic nanoparticles (MNPs) by synthesizing one unique multi-responsive nanostructure. This novel hybrid structure consists of silica-coated magnetic particles encapsulated within a thermo-responsive P(NIPAM-co-AA) hydrogel network on which Aurods are assembled. Furthermore, this research demonstrates that these composite particles respond to several forms of external stimuli (temperature, pH, light, and/or applied magnetic field) owing to their specific architecture. Exposure of the hybrid particles to external stimuli led to a systematic and reversible variation in the hydrodynamic diameter (swelling-deswelling) and thus in the optical properties of the hybrid particles (red-shifting of the plasmon band). Such stimuli-responsive volume changes can be effectively exploited in drug-delivery applications. Electronic supplementary information (ESI) available: Contains detailed information about the synthesis of

  7. Structural and magnetic properties of TlTF{sub 3} (T=Fe, Co and Ni) by hybrid functional theory

    Energy Technology Data Exchange (ETDEWEB)

    Zeb, Raham [Center for Computational Materials Science, University of Malakand, Chakdara, Dir (Lower) (Pakistan); Department of Physics, University of Malakand, Chakdara, Dir (Lower) (Pakistan); Ali, Zahid, E-mail: zahidf82@gmail.com [Center for Computational Materials Science, University of Malakand, Chakdara, Dir (Lower) (Pakistan); Department of Physics, University of Malakand, Chakdara, Dir (Lower) (Pakistan); Ahmad, Iftikhar; Khan, Imad [Center for Computational Materials Science, University of Malakand, Chakdara, Dir (Lower) (Pakistan); Department of Physics, University of Malakand, Chakdara, Dir (Lower) (Pakistan)

    2015-08-15

    DFT studies are performed to investigate the structural, mechanical and magneto-electronic properties of the TlTF{sub 3} (T=Fe, Co and Ni) perovskites for the first time using GGA, GGA+U and hybrid density functional theory (HF). Our calculations show that HF give better results than GGA and GGA+U and more consistent with the experiments. The comparison of the lattice constants calculated by HF with experiments shows a maximum underestimation less than 0.2%. The chemical bonding between different ions in these compounds is explained on the bases of electronic clouds, which reveals that in TlFeF{sub 3}, Fe has more ionic character with F than the rest. The mechanical properties explain the hardness of these compounds and show that TlFeF{sub 3} is more ductile. Spin-dependent electronic band profiles show that TlFeF{sub 3} and TlCoF{sub 3} are metallic, whereas TlNiF{sub 3} is pseudo direct wide bandgap semiconductor. The stable magnetic phase optimizations and the calculated magnetic susceptibility confirm that TlFeF{sub 3} and TlNiF{sub 3} are ferromagnetic whereas TlCoF{sub 3} is anti-ferromagnetic material. - Highlights: • TlTF{sub 3} (T=Fe, Co and Ni) perovskites are investigated theoretically by hybrid density functional theory. • Mechanical properties explain the hardness of these compounds and show that TlFeF{sub 3} is more ductile. • The bandgap calculations show that TlFeF{sub 3} and TlCoF{sub 3} are metallic, whereas TlNiF{sub 3} is a wide bandgap semiconductor. • Magnetic optimizations and magnetic susceptibility confirm that TlFeF{sub 3} and TlNiF{sub 3} are ferromagnetic whereas TlCoF{sub 3} is anti-ferromagnetic material.

  8. Discovery of a magnetic field in the CoRoT hybrid B-type pulsator HD 43317

    CERN Document Server

    Briquet, M; Leroy, B; Pápics, P I

    2013-01-01

    A promising way of testing the impact of a magnetic field on internal mixing (core overshooting, internal rotation) in main-sequence B-type stars is to perform asteroseismic studies of a sample of magnetic pulsators. The CoRoT satellite revealed that the B3IV star HD 43317 is a hybrid SPB/beta Cep-type pulsator that has a wealth of pulsational constraints on which one can perform a seismic modelling, in particular, probing the extent of its convective core and mixing processes. Moreover, indirect indicators of a magnetic field in the star were observed: rotational modulation due to chemical or temperature spots and X-ray emission. Our goal was to directly investigate the field in HD 43317 and, if it is magnetic, to characterise it. We collected data with the Narval spectropolarimeter installed at TBL (T\\'elescope Bernard Lyot, Pic du Midi, France) and applied the least-squares deconvolution technique to measure the circular polarisation of the light emitted from HD 43317. We modelled the longitudinal field me...

  9. Hybrid nanoparticle architecture for cellular uptake and bioimaging: direct crystallization of a polymer immobilized with magnetic nanoparticles on carbon nanotubes.

    Science.gov (United States)

    Depan, D; Misra, R D K

    2012-10-21

    We describe here the success of an innovative approach of direct immobilization of magnetic nanoparticles (MNPs) onto carbon nanotubes (CNTs). The approach involved functionalization of magnetic nanoparticles and consequent covalent linkage to a copolymer (PE-b-PEG). Next, the immobilized magnetic nanoparticles on the copolymer were directly crystallized on the long axis of CNTs, where the interfacial adhesion comes from electrostatic and van der Waals interaction. The intracellular trafficking of a hybrid nanoparticle system [(PE-b-PEG)-MNP-CNT-FITC] in HeLa cells was monitored using a fluorescent marker, FITC, conjugated to the nanoparticle system. The distribution of the nanoparticle system inside cells was studied by fluorescence microscopy in a time and dose dependent manner, and it was observed that the nanoparticles are located in the cytoplasm and no apparent cell death was observed at the concentration studied. Also, the effect of an externally applied magnetic field on actin cytoskeleton, cell morphology and intracellular uptake of iron was studied. The approach described here is promising for simultaneous imaging and monitoring intracellular uptake.

  10. Magnetically Separable Fe3O4/AgBr Hybrid Materials: Highly Efficient Photocatalytic Activity and Good Stability

    Science.gov (United States)

    Cao, Yuhui; Li, Chen; Li, Junli; Li, Qiuye; Yang, Jianjun

    2015-06-01

    Magnetically separable Fe3O4/AgBr hybrid materials with highly efficient photocatalytic activity were prepared by the precipitation method. All of them exhibited much higher photocatalytic activity than the pure AgBr in photodegradation of methyl orange (MO) under visible light irradiation. When the loading amount of Fe3O4 was 0.5 %, the hybrid materials displayed the highest photocatalytic activity, and the degradation yield of MO reached 85 % within 12 min. Silver halide often suffers serious photo-corrosion, while the stability of the Fe3O4/AgBr hybrid materials improved apparently than the pure AgBr. Furthermore, depositing Fe3O4 onto the surface of AgBr could facilitate the electron transfer and thereby leading to the elevated photocatalytic activity. The morphology, phase structure, and optical properties of the composites were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-visible diffuse reflectance spectra (UV-vis DRS), and photoluminescence (PL) techniques.

  11. Multi-responsive hybrid particles: thermo-, pH-, photo-, and magneto-responsive magnetic hydrogel cores with gold nanorod optical triggers.

    Science.gov (United States)

    Rittikulsittichai, Supparesk; Kolhatkar, Arati G; Sarangi, Subhasis; Vorontsova, Maria A; Vekilov, Peter G; Brazdeikis, Audrius; Randall Lee, T

    2016-06-01

    The research strategy described in this manuscript harnesses the attractive properties of hydrogels, gold nanorods (Aurods), and magnetic nanoparticles (MNPs) by synthesizing one unique multi-responsive nanostructure. This novel hybrid structure consists of silica-coated magnetic particles encapsulated within a thermo-responsive P(NIPAM-co-AA) hydrogel network on which Aurods are assembled. Furthermore, this research demonstrates that these composite particles respond to several forms of external stimuli (temperature, pH, light, and/or applied magnetic field) owing to their specific architecture. Exposure of the hybrid particles to external stimuli led to a systematic and reversible variation in the hydrodynamic diameter (swelling-deswelling) and thus in the optical properties of the hybrid particles (red-shifting of the plasmon band). Such stimuli-responsive volume changes can be effectively exploited in drug-delivery applications.

  12. Magnetic excitations and c-f hybridization effect in PrTi2Al20 and PrV2Al20

    Science.gov (United States)

    Tokunaga, Yo; Sakai, Hironori; Kambe, Shinsaku; Sakai, Akito; Nakatsuji, Satoru; Harima, Hisatomo

    2013-08-01

    By means of 27Al NMR studies, we have investigated magnetic excitations and the hybridization effect between Pr 4f and conduction electrons in a pair of cubic compounds PrTr2Al20 (Tr=Ti, V). From Knight shift measurements we have evaluated comparative strengths for the c-f hybridization effect in these compounds and confirm a definite increase of hybridization on replacing Ti with V. Analysis of the spin-lattice relaxation rate 1/T1 reveals that the spectral width of magnetic fluctuations in crystalline electric field excited states is strongly temperature dependent. This result indicates that magnetic fluctuations are dominated by strong c-f exchange coupling at high temperatures and thus is nicely consistent with the Kondo picture that features lnT dependence of resistivity over the same temperature region.

  13. 21 CFR 1250.51 - Railroad conveyances; discharge of wastes.

    Science.gov (United States)

    2010-04-01

    ... CONVEYANCE SANITATION Equipment and Operation of Land and Air Conveyances § 1250.51 Railroad conveyances... servicing area, toilets shall be kept locked unless means are provided to prevent contamination of the area... Food Safety and Applied Nutrition (HFS-627), Food and Drug Administration, 5100 Paint Branch...

  14. 19 CFR 162.22 - Seizure of conveyances.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Seizure of conveyances. 162.22 Section 162.22... TREASURY (CONTINUED) INSPECTION, SEARCH, AND SEIZURE Seizures § 162.22 Seizure of conveyances. (a) General applicability. If it shall appear to any officer authorized to board conveyances and make seizures that there...

  15. Magnetic characteristics measurements of ethanol-water mixtures using a hybrid-type high-temperature superconducting quantum-interference device magnetometer

    Science.gov (United States)

    Tsukada, Keiji; Matsunaga, Yasuaki; Isshiki, Ryota; Nakamura, Yuta; Sakai, Kenji; Kiwa, Toshihiko

    2017-05-01

    The magnetic characteristics of ethanol-water mixtures were investigated using our newly developed hybrid-type magnetometer based on a high-temperature superconducting quantum-interference device. The magnetization (M-H) curves of ethanol-water mixtures show good diamagnetic characteristics. The magnetic moments of the mixture show ethanol concentration dependence. However, the variation in magnetic moment differs from the characteristics expected by considering the magnetic moment ratio between water and ethanol, and volume-reduction rate. It showed two decrement regions separated at approximately 50-60% concentration values. It is also observed that the concentration dependence of the magnetic moment measured using the sample vibration method under a uniform magnetic field and that by the sample rotation method showed slightly different characteristics. These anomalies are attributed to the formation of clustered structures in the mixture.

  16. Novel multifunctional NiFe{sub 2}O{sub 4}/ZnO hybrids for dye removal by adsorption, photocatalysis and magnetic separation

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Hua-Yue [Zhejiang Provincial Key Laboratory of Plant Evolutionary Ecology and Conservation, Taizhou University, Taizhou, Zhejiang 318000 (China); Department of Environmental Engineering, Taizhou University, Taizhou, Zhejiang 318000 (China); Jiang, Ru, E-mail: jiangru0576@163.com [Zhejiang Provincial Key Laboratory of Plant Evolutionary Ecology and Conservation, Taizhou University, Taizhou, Zhejiang 318000 (China); Department of Environmental Engineering, Taizhou University, Taizhou, Zhejiang 318000 (China); Fu, Yong-Qian [Zhejiang Provincial Key Laboratory of Plant Evolutionary Ecology and Conservation, Taizhou University, Taizhou, Zhejiang 318000 (China); Li, Rong-Rong [College of Pharmaceutical and Chemical Engineering, Taizhou University, Taizhou, Zhejiang 318000 (China); Yao, Jun; Jiang, Sheng-Tao [Zhejiang Provincial Key Laboratory of Plant Evolutionary Ecology and Conservation, Taizhou University, Taizhou, Zhejiang 318000 (China); Department of Environmental Engineering, Taizhou University, Taizhou, Zhejiang 318000 (China)

    2016-04-30

    Graphical abstract: - Highlights: • The NiFe{sub 2}O{sub 4} was decorated on ZnO surface by a hydrothermal method. • NiFe{sub 2}O{sub 4}/ZnO hybrids show high adsorption capacity and excellent photostability. • The main active species in dye decolorization by NiFe{sub 2}O{sub 4}/ZnO hybrids are ·OH and h{sup +}. • NiFe{sub 2}O{sub 4}/ZnO hybrids can be easily separated by an external magnet. - Abstract: Novel multifunctional NiFe{sub 2}O{sub 4}/ZnO hybrids were prepared by a hydrothermal method and their physicochemical properties were characterized by XRD, SEM, TEM, TGA, VSM, BET and UV–vis DRS. The adsorption and photocatalytic performance of NiFe{sub 2}O{sub 4}/ZnO hybrids were systematically investigated using congo red as a model contaminant. With the introduction of NiFe{sub 2}O{sub 4}, NiFe{sub 2}O{sub 4}/ZnO hybrids can absorb the whole light from 300 nm to 700 nm. The adsorption capacity (221.73 mg g{sup −1}) of NiFe{sub 2}O{sub 4}/ZnO hybrids is higher than those of NiFe{sub 2}O{sub 4}, ZnO and mechanically mixed NiFe{sub 2}O{sub 4}/ZnO hybrids. The removal of congo red solution (20 mg L{sup −1}) by NiFe{sub 2}O{sub 4}/ZnO hybrids was about 94.55% under simulated solar light irradiation for 10 min. ·OH and h{sup +} play important roles in the decolorization of congo red solution by NiFe{sub 2}O{sub 4}/ZnO hybrids under simulated solar light irradiation. The decolorization efficiency of congo red solution is 97.23% for the fifth time by NiFe{sub 2}O{sub 4}/ZnO hybrids under simulate solar light irradiation, indicating the high photostability and durability. NO{sub 3}{sup −} and Cl{sup −} anions which are ubiquitous components in dye-containing wastewater have negligible influence on the effectiveness of NiFe{sub 2}O{sub 4}/ZnO hybrids. Moreover, the magnetic NiFe{sub 2}O{sub 4}/ZnO hybrids can be easily separated from the reacted solution by an external magnet.

  17. System and method for conveying an assembly

    KAUST Repository

    Eitelhuber, Georg

    2015-01-15

    An apparatus, system, and method for conveying an assembly along a track. A rail can include a first planar side, a second planar side, and a third planar side. The first, second, and third planar sides can be arranged to form at least two acute angles. A carriage assembly can include a drive wheel and at least two roller sets. The drive wheel can be configured to contact the first planar side and is configured to translate the carriage assembly along the rail. The at least two roller sets can be configured to contact the two other sides to maintain the carriage in contact with the rail.

  18. Vertical-Screw-Auger Conveyer Feeder

    Science.gov (United States)

    Walton, Otis (Inventor); Vollmer, Hubert J. (Inventor)

    2016-01-01

    A conical feeder is attached to a vertically conveying screw auger. The feeder is equipped with scoops and rotated from the surface to force-feed regolith the auger. Additional scoops are possible by adding a cylindrical section above the conical funnel section. Such then allows the unit to collect material from swaths larger in diameter than the enclosing casing pipe of the screw auger. A third element includes a flexible screw auger. All three can be used in combination in microgravity and zero atmosphere environments to drill and recover a wide area of subsurface regolith and entrained volatiles through a single access point on the surface.

  19. Noninvasive prenatal diagnosis. Use of density gradient centrifugation, magnetically activated cell sorting and in situ hybridization

    DEFF Research Database (Denmark)

    Campagnoli, C; Multhaupt, H A; Ludomirski, A;

    1997-01-01

    cells recovered did not differ. Seven of seven male pregnancies were correctly identified. One case of trisomy 21 was detected. CONCLUSION: The in situ hybridization analysis of fetal nucleated erythrocytes isolated from maternal blood using single density gradient centrifugation, anti-CD71/anti...... of the isolated cells were subjected to in situ hybridization with specific DNA probes for the Y chromosome and chromosome 21 to confirm the fetal origin. RESULTS: After MiniMACS the enrichment factors for the CD71/GPA- and CD36/GPA-positive cells from maternal blood were similar, and the percentages of fetal...

  20. Characteristic Analysis and Experimental Study of a Hybrid Permanent Magnet Variable Flux Memory Motor

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Variable flux permanent magnet (PM) memory motors (VFMM), which combine the advantages of PM machines with high power density and electrically excited machines with controllable air-gap magnetic flux, have been widely concerned and researched in recent years.

  1. A hybrid two-component Bose–Einstein condensate interferometer for measuring magnetic field gradients

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Fei [Key Laboratory of Fiber Optic Sensing Technology and Information Processing, Ministry of Education, Wuhan University of Technology, Wuhan 430070 (China); Huang, Jiahao, E-mail: hjiahao@mail2.sysu.edu.cn [TianQin Research Center & School of Physics and Astronomy, Sun Yat-Sen University, SYSU Zhuhai Campus, Zhuhai 519082 (China); Liu, Quan [Key Laboratory of Fiber Optic Sensing Technology and Information Processing, Ministry of Education, Wuhan University of Technology, Wuhan 430070 (China)

    2017-03-03

    Highlights: • A scheme for detecting magnetic field gradients via a double-well two-component Bose–Einstein condensate interferometer. • The magnetic field gradient can be extracted by either the spin population or the external state. • Our proposal is potentially sensitive to weak magnetic field inhomogeneity due to its small sensor size. - Abstract: We have proposed a scheme to detect magnetic field gradients via an interferometer based on a double-well two-component Bose–Einstein condensate (BEC). Utilizing a sequence of quantum control operations on both external and internal degree of the BEC, one can extract the magnetic field gradients by measuring either the population in one component or the fidelity between the final external state and the initial ground state. Our scheme can be implemented by current experimental techniques of manipulating ultracold atoms.

  2. Magnetic isotope effect and theory of atomic orbital hybridization to predict a mechanism of chemical exchange reactions.

    Science.gov (United States)

    Epov, Vladimir N

    2011-08-07

    A novel approach is suggested to investigate the mechanisms of chemical complexation reactions based on the results of Fujii with co-workers; they have experimentally observed that several metals and metalloids demonstrate mass-independent isotope fractionation during the reactions with the DC18C6 crown ether using solvent-solvent extraction. In this manuscript, the isotope fractionation caused by the magnetic isotope effect is used to understand the mechanisms of chemical exchange reactions. Due to the rule that reactions are allowed for certain electron spin states, and forbidden for others, magnetic isotopes show chemical anomalies during these reactions. Mass-independent fractionation is suggested to take place due to the hyperfine interaction of the nuclear spin with the electron spin of the intermediate product. Moreover, the sign of the mass-independent fractionation is found to be dependent on the element and its species, which is also explained by the magnetic isotope effect. For example, highly negative mass-independent isotope fractionation of magnetic isotopes was observed for reactions of DC18C6 with SnCl(2) species and with several Ru(III) chloro-species, and highly positive for reactions of this ether with TeCl(6)(2-), and with several Cd(II) and Pd(II) species. The atomic radius of an element is also a critical parameter for the reaction with crown ether, particularly the element ions with [Kr]4d(n)5s(m) electron shell fits the best with the DC18C6 crown ring. It is demonstrated that the magnetic isotope effect in combination with the theory of orbital hybridization can help to understand the mechanism of complexation reactions. The suggested approach is also applied to explain previously published mass-independent fractionation of Hg isotopes in other types of chemical exchange reactions.

  3. Conveying movement in music and prosody.

    Directory of Open Access Journals (Sweden)

    Stephen C Hedger

    Full Text Available We investigated whether acoustic variation of musical properties can analogically convey descriptive information about an object. Specifically, we tested whether information from the temporal structure in music interacts with perception of a visual image to form an analog perceptual representation as a natural part of music perception. In Experiment 1, listeners heard music with an accelerating or decelerating temporal pattern, and then saw a picture of a still or moving object and decided whether it was animate or inanimate--a task unrelated to the patterning of the music. Object classification was faster when musical motion matched visually depicted motion. In Experiment 2, participants heard spoken sentences that were accompanied by accelerating or decelerating music, and then were presented with a picture of a still or moving object. When motion information in the music matched motion information in the picture, participants were similarly faster to respond. Fast and slow temporal patterns without acceleration and deceleration, however, did not make participants faster when they saw a picture depicting congruent motion information (Experiment 3, suggesting that understanding temporal structure information in music may depend on specific metaphors about motion in music. Taken together, these results suggest that visuo-spatial referential information can be analogically conveyed and represented by music and can be integrated with speech or influence the understanding of speech.

  4. Conveying movement in music and prosody.

    Science.gov (United States)

    Hedger, Stephen C; Nusbaum, Howard C; Hoeckner, Berthold

    2013-01-01

    We investigated whether acoustic variation of musical properties can analogically convey descriptive information about an object. Specifically, we tested whether information from the temporal structure in music interacts with perception of a visual image to form an analog perceptual representation as a natural part of music perception. In Experiment 1, listeners heard music with an accelerating or decelerating temporal pattern, and then saw a picture of a still or moving object and decided whether it was animate or inanimate--a task unrelated to the patterning of the music. Object classification was faster when musical motion matched visually depicted motion. In Experiment 2, participants heard spoken sentences that were accompanied by accelerating or decelerating music, and then were presented with a picture of a still or moving object. When motion information in the music matched motion information in the picture, participants were similarly faster to respond. Fast and slow temporal patterns without acceleration and deceleration, however, did not make participants faster when they saw a picture depicting congruent motion information (Experiment 3), suggesting that understanding temporal structure information in music may depend on specific metaphors about motion in music. Taken together, these results suggest that visuo-spatial referential information can be analogically conveyed and represented by music and can be integrated with speech or influence the understanding of speech.

  5. High-Energy Permanent Magnets for Hybrid Vehicles and Alternative Energy Uses

    Energy Technology Data Exchange (ETDEWEB)

    Hadjipanayis, George C. [University of Delaware; McCallum, William R. [Ames Laboratory; Sellmyer, David J. [University of Nebraska, Lincoln; Harris, Vincent [Northeastern University; Carpenter, Everett E. [Virginia Commonwealth University; Liu, Jinfang [Electron Energy Corporation

    2013-12-17

    The report summarizes research undertaken by a multidisciplinary team aimed at the development of the next generation high-energy permanent magnets. The principal approach was relied on bottom-up fabrication of anisotropic nanocomposite magnets. Our efforts resulted in further development of the theoretical concept and fabrication principles for the nanocomposites and in synthesis of a range of rare-earth-based hard magnetic nanoparticles. Even though we did not make a breakthrough in the assembly of these hard magnetic particles with separately prepared Fe(Co) nanoparticles and did not obtain a compact nanocomposite magnet, our performed research will help to direct the future efforts, in particular, towards nano-assembly via coating, when the two phases which made the nanocomposite are first organized in core-shell-structured particles. Two other approaches were to synthesize (discover) new materials for the traditional singe-material magnets and the nanocomposite magnets. Integrated theoretical and experimental efforts lead to a significant advance in nanocluster synthesis technique and yielded novel rare-earth-free nanostructured and nanocomposite materials. Examination of fifteen R-Fe-X alloy systems (R = rare earth), which have not been explored earlier due to various synthesis difficulties reveal several new ferromagnetic compounds. The research has made major progress in bottom-up manufacturing of rare-earth-containing nanocomposite magnets with superior energy density and open new directions in development of higher-energy-density magnets that do not contain rare earths. The advance in the scientific knowledge and technology made in the course of the project has been reported in 50 peer-reviewed journal articles and numerous presentations at scientific meetings.

  6. Exchange-coupled nanoscale SmCo/NdFeB hybrid magnets

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Dapeng; Poudyal, Narayan; Rong, Chuanbing; Zhang, Ying; Kramer, Matthew J.; Liu, J. Ping

    2012-05-11

    Nanoscalehybridmagnets containing SmCo5 and Nd2Fe14B hard magnetic phases have been produced via a novel “in-one-pot” processing route. The grain size of the processed bulk composite materials is controlled below 20 nm. The refinement of the nanoscale morphology leads to effective inter-phase exchange coupling that results in single-phase like magnetic properties. Energy product of 14 MGOe was obtained in the isotropic nanocomposite magnets at room temperature. At elevated temperatures, the hybridmagnets have greatly improved thermal stability compared to the Nd2Fe14B single-phase counterpart and have substantially increased magnetization and energy products compared to the single-phase SmCo5 counterpart.

  7. Irreversible magnetization switching at the onset of superconductivity in a superconductor ferromagnet hybrid

    Energy Technology Data Exchange (ETDEWEB)

    Curran, P. J.; Bending, S. J. [Department of Physics, University of Bath, Claverton Down, Bath BA2 7AY (United Kingdom); Kim, J.; Satchell, N.; Witt, J. D. S.; Burnell, G. [School of Physics and Astronomy, University of Leeds, Leeds LS2 9JT (United Kingdom); Flokstra, M. G.; Lee, S. L. [School of Physics and Astronomy, SUPA, University of St. Andrews, St. Andrews KY16 9SS (United Kingdom); Cooper, J. F. K.; Kinane, C. J.; Langridge, S. [ISIS, Rutherford Appleton Laboratory, Oxfordshire OX11 0QX (United Kingdom); Isidori, A.; Eschrig, M. [Department of Physics, Royal Holloway, University of London, Egham, Surrey TW20 0EX (United Kingdom); Pugach, N. [Department of Physics, Royal Holloway, University of London, Egham, Surrey TW20 0EX (United Kingdom); Skobeltsyn Institute of Nuclear Physics, M.V. Lomonosov Moscow State University (SYNP MSU), Leninskie Gory, Moscow 119991 (Russian Federation)

    2015-12-28

    We demonstrate that the magnetic state of a superconducting spin valve, that is normally controlled with an external magnetic field, can also be manipulated by varying the temperature which increases the functionality and flexibility of such structures as switching elements. In this case, switching is driven by changes in the magnetostatic energy due to spontaneous Meissner screening currents forming in the superconductor below the critical temperature. Our scanning Hall probe measurements also reveal vortex-mediated pinning of the ferromagnetic domain structure due to the pinning of quantized stray fields in the adjacent superconductor. The ability to use temperature as well as magnetic field to control the local magnetisation structure raises the prospect of potential applications in magnetic memory devices.

  8. Magnetic-field-induced change of magnetoelectric coupling in the hybrid multiferroic (ND4)2[FeC l5.D2O

    Science.gov (United States)

    Rodríguez-Velamazán, J. Alberto; Fabelo, Oscar; Campo, Javier; Millán, Ángel; Rodríguez-Carvajal, Juan; Chapon, Laurent C.

    2017-05-01

    In this paper, we elucidate the changes of magnetoelectric coupling mechanism in different zones of the rich magnetic field-temperature (B -T ) phase diagram of the molecular multiferroic (NH4) 2[FeC l5.H2O ] , which represents one of the rare cases where improper ferroelectricity has been observed in a hybrid material. We have recently proposed a mechanism of multiferroicity in zero magnetic field in the deuterated form of this material from a detailed determination of its crystal and magnetic structures. The proposed magnetic structure at zero magnetic field corresponds to a cycloidal spin arrangement that gives rise to a ferroelectric polarization through the spin current mechanism induced via the inverse Dzyaloshinskii-Moriya interaction. In this paper, we present a single-crystal neutron diffraction study under external magnetic field, aimed at elucidating the evolution of the magnetic structure under applied magnetic field, and determine the mechanism of magnetoelectric coupling, which allows us to describe an unprecedented change from spin current to spin-dependent p -d hybridization mechanism.

  9. Parametric decay instability near the upper hybrid resonance in magnetically confined fusion plasmas

    Science.gov (United States)

    Hansen, S. K.; Nielsen, S. K.; Salewski, M.; Stejner, M.; Stober, J.; the ASDEX Upgrade Team

    2017-10-01

    In this paper we investigate parametric decay of an electromagnetic pump wave into two electrostatic daughter waves, particularly an X-mode pump wave decaying into a warm upper hybrid wave (a limit of an electron Bernstein wave) and a warm lower hybrid wave. We describe the general theory of the above parametric decay instability (PDI), unifying earlier treatments, and show that it may occur in underdense and weakly overdense plasmas. The PDI theory is used to explain anomalous sidebands observed in collective Thomson scattering (CTS) spectra at the ASDEX Upgrade tokamak. The theory may also account for similar observations during CTS experiments in stellarators, as well as in some 1st harmonic electron cyclotron resonance and O-X-B heating experiments.

  10. Influence of hybridization in the magnetic circular X-ray dichroism at the Ce-M(4,5) absorption edges of Ce-Fe systems

    NARCIS (Netherlands)

    Finazzi, M; deGroot, FMF; Dias, AM; Kappler, JP; Schulte, O; Felsch, W; Krill, G

    We have performed a Magnetic Circular X-ray Dichroism (XMCD) study at the Ce-M(4,5) absorption edges on some Ce-Fe systems. We find that the dichroism signal in these systems is very sensitive to the degree of hybridization of the 4f electrons with the valence band. XMCD is able to demonstrate that

  11. Influence of hybridization in the Magnetic Circular X-ray Dichroism at the Ce-M4,5 absorption edges of Ce-Fe systems

    NARCIS (Netherlands)

    Finazzi, M.; de Groot, F.M.F.; Dias, A.-M.; Kappler, J.-P.; Schulte, O.; Felsch, W.; Krill, G.

    2013-01-01

    We have performed a Magnetic Circular X-ray Dichroism (XMCD) study at the Ce-M*,s absorption edges on some Ce-Fe systems. We find that the dichroism signal in these systems is very sensitive to the degree of hybridization of the 4f electrons with the valence band. XMCD is able to demonstrate that th

  12. Influence of hybridization in the magnetic circular X-ray dichroism at the Ce-M(4,5) absorption edges of Ce-Fe systems

    NARCIS (Netherlands)

    Finazzi, M; deGroot, FMF; Dias, AM; Kappler, JP; Schulte, O; Felsch, W; Krill, G

    1996-01-01

    We have performed a Magnetic Circular X-ray Dichroism (XMCD) study at the Ce-M(4,5) absorption edges on some Ce-Fe systems. We find that the dichroism signal in these systems is very sensitive to the degree of hybridization of the 4f electrons with the valence band. XMCD is able to demonstrate that

  13. Design of a Permanent Magnet Synchronous Machine for a Flywheel Energy Storage System within a Hybrid Electric Vehicle

    Science.gov (United States)

    Jiang, Ming

    As an energy storage device, the flywheel has significant advantages over conventional chemical batteries, including higher energy density, higher efficiency, longer life time, and less pollution to the environment. An effective flywheel system can be attributed to its good motor/generator (M/G) design. This thesis describes the research work on the design of a permanent magnet synchronous machine (PMSM) as an M/G suitable for integration in a flywheel energy storage system within a large hybrid electric vehicle (HEV). The operating requirements of the application include wide power and speed ranges combined with high total system efficiency. Along with presenting the design, essential issues related to PMSM design including cogging torque, iron losses and total harmonic distortion (THD) are investigated. An iterative approach combining lumped parameter analysis with 2D Finite Element Analysis (FEA) was used, and the final design is presented showing excellent performance.

  14. Synthesis and Characterization of Hybrid-Magnetic Nanoparticles and Their Application for Removal of Arsenic from Groundwater

    Directory of Open Access Journals (Sweden)

    Marta A. Bavio

    2013-01-01

    Full Text Available Multiwall carbon nanotubes (MWCNTs were oxidized with different agents and a characterization study was carried out. Then, hybrid-magnetic nanoparticles (HMNPs were synthesized as iron oxide supported on the selected multiwalled carbon nanotubes (MWCNTs-Fe3O4 obtained from MWCNTs oxidized with HNO3. The HMNPs characterization revealed the presence of iron oxide as magnetite onto the MWCNTs surfaces. These HMNPs were used for arsenic removal from groundwater. The adsorption process variables were optimized (concentration of NPs, contact time, and pH, and these systems could remove 39.93 mg As/g adsorbent. Therefore, these nanoparticles appear as a good alternative for removing arsenic from water samples.

  15. Hybrid magnetic materials based on layered double hydroxides: from the chemistry towards the applications

    OpenAIRE

    ABELLÁN SÁEZ, GONZALO

    2014-01-01

    Layered double hydroxides (LDHs) are the leitmotiv of this dissertation. Contradicting the assertion that “any past was better”, LDHs have been continuously revisited from the middle of the twentieth century, and represent an excellent example of the never-ending beauty of Chemistry. New synthetic perspectives are giving a new impetus to LDH chemistry, which among hybrid materials, are finding their heyday. This is resulting in novel materials and also paving the way for new fundamental and p...

  16. Performance Analysis of a Hybrid One-Sided Magnetic Exciter Mounted on a Piezoelectric Stack

    OpenAIRE

    Nandi, A.; Neogy, S.

    2010-01-01

    The present work proposes a non-contact hybrid exciter especially useful for harmonic excitation of lightly damped structures/rotors. In the proposed exciter an electromagnet is placed on a piezoelectric stack and the extension of the piezoelectric stack is made almost equal to the displacement of the structure using a simple tracking control. This largely eliminates stiffness coupling between the structure/rotor and the exciter and non-linearity in the excitation force due to the vibration o...

  17. Quantification of mRNA in Salmonella sp. seeded soil and chicken manure using magnetic capture hybridization RT-PCR.

    Science.gov (United States)

    Jacobsen, Carsten Suhr; Holben, William E

    2007-05-01

    Direct quantification of mRNA from Salmonella sp. seeded for 1 h to soil and chicken manure was accomplished using magnetic capture hybridization as a purification technique. This detection strategy targeted the invA gene present in Salmonella sp. After cell lysis, phenol/chloroform purification and isopropanol precipitation, the RNA extract was combined with the hybridization probe conjugated to paramagnetic beads. After hybridization, the captured nucleic acids were released by denaturation and purified of contaminating DNA using DNase. The resulting RNA was of high purity and there was no need for dilution of the samples prior to RT-PCR. The developed procedure was reproducibly used to quantify Salmonella sp. in high organic agricultural soil. The detection limit for mRNA using ordinary quantitative PCR (employing SYBRgreen-based detection) was 5 x 10(4)Salmonella sp. cells per gram of soil. Chicken manure amended into soil (1:4 w/w) did not reduce the ability to quantify Salmonella sp. mRNA in soil. Pasteurization (65 degrees C, 30 min) of chicken manure containing Salmonella sp. dramatically reduced the detection of invA mRNA (requiring 42 qPCR cycles for detection versus 26 cycles in unpasteurized manure), presumably due to degradation of the invA mRNA in Salmonella sp. cells killed by pasteurization. By contrast, DNA-based qPCR still detected Salmonella sp. in the pasteurized manure. Thus, in this case using samples seeded with fresh Salmonella sp. the mRNA-based detection appears to be superior to minimizing false-positive detection which was prevalent with DNA-based qPCR.

  18. Hybrid Positron Emission Tomography/Magnetic Resonance Imaging: Challenges, Methods, and State of the Art of Hardware Component Attenuation Correction.

    Science.gov (United States)

    Paulus, Daniel H; Quick, Harald H

    2016-10-01

    Attenuation correction (AC) is an essential step in the positron emission tomography (PET) data reconstruction process to provide accurate and quantitative PET images. The introduction of PET/magnetic resonance (MR) hybrid systems has raised new challenges but also possibilities regarding PET AC. While in PET/computed tomography (CT) imaging, CT images can be converted to attenuation maps, MR images in PET/MR do not provide a direct relation to attenuation. For the AC of patient tissues, new methods have been suggested, for example, based on image segmentation, atlas registration, or ultrashort echo time MR sequences. Another challenge in PET/MR hybrid imaging is AC of hardware components that are placed in the PET/MR field of view, such as the patient table or various radiofrequency (RF) coils covering the body of the patient for MR signal detection. Hardware components can be categorized into 4 different groups: (1) patient table, (2) RF receiver coils, (3) radiation therapy equipment, and (4) PET and MR imaging phantoms. For rigid and stationary objects, such as the patient table and some RF coils like the head/neck coil, predefined CT-based attenuation maps stored on the system can be used for automatic AC. Flexible RF coils are not included into the AC process till now because they can vary in position as well as in shape and are not accurately detectable with the PET/MR system.This work summarizes challenges, established methods, new concepts, and the state of art in hardware component AC in the context of PET/MR hybrid imaging. The work also gives an overview of PET/MR hardware devices, their attenuation properties, and their effect on PET quantification.

  19. Sensitive electrochemical determination of miRNAs based on a sandwich assay onto magnetic microcarriers and hybridization chain reaction amplification.

    Science.gov (United States)

    Torrente-Rodríguez, R M; Campuzano, S; Montiel, V Ruiz-Valdepeñas; Montoya, J J; Pingarrón, J M

    2016-12-15

    A novel electrochemical approach for determination of miRNAs involving a sandwich hybridization assay onto streptavidin-magnetic beads (Strep-MBs), hybridization chain reaction (HCR) amplification and amperometric detection at disposable screen-printed carbon electrodes is reported. Using miRNA-21 as the target analyte, a dynamic linear range from 0.2 to 5.0nM with a 60pM (1.5fmol in 25μL) detection limit was obtained. The achieved sensitivity is 24-fold higher than a non-HCR amplification approach involving conventional sandwich type assay onto MBs. Moreover, the whole assay time lasted 1h 45min which is remarkably shorter than other reported methodologies. The methodology exhibited full selectivity against other non-complementary miRNAs as well as an acceptable discrimination between homologous miRNA family members. The applicability of this novel approach was demonstrated by determining mature miRNA-21 in total RNA (RNAt) extracted from tumor cells and human tissues.

  20. Soft Magnetic Properties of Fe-based Amorphous/Nanocrystalline Hybrid Materials

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yeonjoo; Jeon, Jonggyu; Lee, Mijung; Choi, Hyunjoo [Kookmin University, Seoul (Korea, Republic of); Jang, Teasuk; Lee, Minwoo [Sunmoon University, Asan (Korea, Republic of); Kim, Yongjin; Yang, Dongyeol [Korea Institute of Materials Science, Changwon (Korea, Republic of)

    2017-05-15

    In this study, the effect of the crystalline structure on the magnetic properties of Fe-based amorphous powder is investigated. The Fe-B-P-C-Nb-Hf amorphous powder with excellent soft magnetic properties is prepared via gas-atomization, and the atomized amorphous powder is annealed in order to generate a small amount of nanosized crystallites in the amorphous matrix. For the powder annealed at 375 ℃, the coercivity is decreased by 96.15%from 3632.68 to 139.89 A/m, and the magnetization is increased 19.04% from 0.192 to 0.229 Wbm/g. For the powder annealed at 425 ℃, the coercivity is decreased 95.14%to 176.72 A/m and the magnetization is increased 0.71%to 0.193 Wbm/g. The simultaneous enhancement of the coercivity and magnetization can be attributed to the generation of a small amount of nanosized crystallites and the release of the residual stresses.

  1. Synthesis of biocompatible hybrid magnetic hollow spheres based on encapsulation strategy.

    Science.gov (United States)

    Ha, Wei; Wu, Hao; Ma, Yuan; Fan, Min-Min; Peng, Shu-Lin; Ding, Li-Sheng; Zhang, Sheng; Li, Bang-Jing

    2013-01-30

    A kind of novel magnetic hollow spheres was prepared by encapsulating magnetofluid into polymeric hollow spheres. Polymeric hollow nanospheres were constructed by self-assembly of rod-coil complexes, in which the rod-like segments were formed by inclusion of α-cyclodextrins (α-CD) and grafting poly(ethylene glycol) (PEG) chains of chitosan-graft-PEG (CS-g-PEG). Structural characteristics of CS-g-PEG/α-CD hollow spheres were investigated in detail by NMR, XRD, TEM, etc. Furthermore, those hollow spheres showed a pH responsive property which induced a considerable change of their radius. Magnetofluid was physically entrapped into the empty domain while hollow spheres were formed, it was found that the hollow spheres can encapsulate large quantities of magnetofluid and the encapsulated magnetofluid still possess magnetic responsiveness properties. We expect that this strategy may be served as a novel and more straightforward approach to obtain magnetic hollow spheres for biomedical application.

  2. A hybrid magnetic/complementary metal oxide semiconductor process design kit for the design of low-power non-volatile logic circuits

    Science.gov (United States)

    Di Pendina, G.; Prenat, G.; Dieny, B.; Torki, K.

    2012-04-01

    Since the advent of the MOS transistor, the performance of microelectronic circuits has followed Moore's law, stating that their speed and density would double every 18 months. Today, this trend tends to get out of breath: the continuously decreasing size of devices and increasing operation frequency result in power consumption and heating issues. Among the solutions investigated to circumvent these limitations, the use of non-volatile devices appears particularly promising. It allows easing, for example, the power gating technique, which consists in cutting-off the power supply of inactive blocks without losing information, drastically reducing the standby power consumption. In this approach, the advantages of magnetic tunnel junctions (MTJs) compared with other non-volatile devices allow one to design hybrid CMOS/magnetic circuits with high performance and new functionalities. Designing such circuits requires integrating MTJs in standard microelectronics design suites. This is performed by means of a process design kit (PDK) for the hybrid CMOS/magnetic technology. We present here a full magnetic PDK, which contains a compact model of the MTJ for electrical simulation, technology files for layout and physical verifications, and standard cells for the design of complex logic circuits and which is compatible with standard design suites. This PDK allows designers to accurately and comfortably design high-performance hybrid CMOS/magnetic logic circuits in the same way as standard CMOS circuits.

  3. A hybrid two-component Bose-Einstein condensate interferometer for measuring magnetic field gradients

    Science.gov (United States)

    Xu, Fei; Huang, Jiahao; Liu, Quan

    2017-03-01

    We have proposed a scheme to detect magnetic field gradients via an interferometer based on a double-well two-component Bose-Einstein condensate (BEC). Utilizing a sequence of quantum control operations on both external and internal degree of the BEC, one can extract the magnetic field gradients by measuring either the population in one component or the fidelity between the final external state and the initial ground state. Our scheme can be implemented by current experimental techniques of manipulating ultracold atoms.

  4. Adsorption of environmental pollutants using magnetic hybrid nanoparticles modified with β-cyclodextrin

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Niejun [Key Lab of Organic Optoelectronic and Molecular Engineering, Department of Chemistry, Tsinghua University, Beijing 100084 (China); Beijing Key Laboratory of Microanalytical Method and Instrumentation, Department of Chemistry, Tsinghua University, Beijing, 100084 (China); Zhou, Lilin; Guo, Jun; Ye, Qiquan [Key Lab of Organic Optoelectronic and Molecular Engineering, Department of Chemistry, Tsinghua University, Beijing 100084 (China); Lin, Jin-Ming [Beijing Key Laboratory of Microanalytical Method and Instrumentation, Department of Chemistry, Tsinghua University, Beijing, 100084 (China); Yuan, Jinying, E-mail: yuanjy@mail.tsinghua.edu.cn [Key Lab of Organic Optoelectronic and Molecular Engineering, Department of Chemistry, Tsinghua University, Beijing 100084 (China)

    2014-06-01

    Graft through strategy was utilized to coat magnetic Fe{sub 3}O{sub 4} nanoparticles with poly(glycidyl methacrylate) using ordinary radical polymerization and then β-cyclodextrin was linked onto the surface of nanoparticles. With these nanoparticles modified with cyclodextrin groups, adsorption of two model environmental pollutants, bisphenol A and copper ions, was studied. Host–guest interactions between cyclodextrin and aromatic molecules had a great contribution to the adsorption of bisphenol A, while multiple hydroxyls of cyclodextrin also helped the adsorption of copper ions. These magnetic nanoparticles could be applied in the elimination, enrichment and detection of some environmental pollutants.

  5. Adsorption of environmental pollutants using magnetic hybrid nanoparticles modified with β-cyclodextrin

    Science.gov (United States)

    Wang, Niejun; Zhou, Lilin; Guo, Jun; Ye, Qiquan; Lin, Jin-Ming; Yuan, Jinying

    2014-06-01

    Graft through strategy was utilized to coat magnetic Fe3O4 nanoparticles with poly(glycidyl methacrylate) using ordinary radical polymerization and then β-cyclodextrin was linked onto the surface of nanoparticles. With these nanoparticles modified with cyclodextrin groups, adsorption of two model environmental pollutants, bisphenol A and copper ions, was studied. Host-guest interactions between cyclodextrin and aromatic molecules had a great contribution to the adsorption of bisphenol A, while multiple hydroxyls of cyclodextrin also helped the adsorption of copper ions. These magnetic nanoparticles could be applied in the elimination, enrichment and detection of some environmental pollutants.

  6. Modeling and Control of a Flux-Modulated Compound-Structure Permanent-Magnet Synchronous Machine for Hybrid Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Zhiyi Song

    2012-01-01

    Full Text Available The compound-structure permanent-magnet synchronous machine (CS-PMSM, comprising a double rotor machine (DRM and a permanent-magnet (PM motor, is a promising electronic-continuously variable transmission (e-CVT concept for hybrid electric vehicles (HEVs. By CS-PMSM, independent speed and torque control of the vehicle engine is realized without a planetary gear unit. However, the slip rings and brushes of the conventional CS-PMSM are considered a major drawback for vehicle application. In this paper, a brushless flux-modulated CS-PMSM is investigated. The operating principle and basic working modes of the CS-PMSM are discussed. Mathematical models of the CS-PMSM system are given, and joint control of the two integrated machines is proposed. As one rotor of the DRM is mechanically connected with the rotor of the PM motor, special rotor position detection and torque allocation methods are required. Simulation is carried out by Matlab/Simulink, and the feasibility of the control system is proven. Considering the complexity of the controller, a single digital signal processor (DSP is used to perform the interconnected control of dual machines instead of two separate ones, and a typical hardware implementation is proposed.

  7. Preparation of hydrazine functionalized polymer brushes hybrid magnetic nanoparticles for highly specific enrichment of glycopeptides.

    Science.gov (United States)

    Huang, Guang; Sun, Zhen; Qin, Hongqiang; Zhao, Liang; Xiong, Zhichao; Peng, Xiaojun; Ou, Junjie; Zou, Hanfa

    2014-05-07

    Hydrazide chemistry is a powerful technique in glycopeptides enrichment. However, the low density of the monolayer hydrazine groups on the conventional hydrazine-functionalized magnetic nanoparticles limits the efficiency of glycopeptides enrichment. Herein, a novel magnetic nanoparticle grafted with poly(glycidyl methacrylate) (GMA) brushes was fabricated via reversible addition-fragmentation chain transfer (RAFT) polymerization, and a large amount of hydrazine groups were further introduced to the GMA brushes by ring-opening the epoxy groups with hydrazine hydrate. The resulting magnetic nanoparticles (denoted as Fe3O4@SiO2@GMA-NHNH2) demonstrated the high specificity of capturing glycopeptides from a tryptic digest of the sample comprising a standard non-glycosylated protein bovine serum albumin (BSA) and four standard glycoproteins with a weight ratio of 50 : 1, and the detection limit was as low as 130 fmol. In the analysis of a real complex biological sample, the tryptic digest of hepatocellular carcinoma, 179 glycosites were identified by the Fe3O4@SiO2@GMA-NHNH2 nanoparticles, surpassing that of 68 glycosites by Fe3O4@SiO2-single-NHNH2 (with monolayer hydrazine groups on the surface). It can be expected that the magnetic nanoparticles modified with hydrazine functionalized polymer brushes via RAFT technique will improve the specificity and the binding capacity of glycopeptides from complex samples, and show great potential in the analysis of protein glycosylation in biological samples.

  8. Self-commissioning of permanent magnet synchronous machine drives using hybrid approach

    DEFF Research Database (Denmark)

    Basar, M. Sertug; Bech, Michael Møller; Andersen, Torben Ole

    2014-01-01

    Self-commissioning of permanent-magnet (PM) synchronous machines (PMSMs) is of prime importance in an industrial drive system because control performance and system stability depend heavily on the accurate machine parameter information. This article focuses on a combination of offline and online ...

  9. Performance-oriented Analysis of a Hybrid magnetic Assembly for a Heat-pump Magnetocaloric Device

    DEFF Research Database (Denmark)

    Insinga, Andrea Roberto; Smith, Anders; Bahl, Christian R.H.

    2014-01-01

    Conventional active-regenerator magnetocaloric devices include moving parts, with the purpose of generating an oscillating magnetic field in the magneto-caloric material, placed inside the regenerator. In this work a different design is analyzed, for application in a magnetocaloric heat pump...

  10. Development of carbon nanotubes/CoFe{sub 2}O{sub 4} magnetic hybrid material for removal of tetrabromobisphenol A and Pb(II)

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Lincheng, E-mail: zhoulc@lzu.edu.cn [State Key Laboratory of Applied Organic Chemistry, College of Chemistry and Chemical Engineering, Institute of Biochemical Engineering and Environmental Technology, Lanzhou University, Lanzhou 730000 (China); Ji, Liqin [State Key Laboratory of Applied Organic Chemistry, College of Chemistry and Chemical Engineering, Institute of Biochemical Engineering and Environmental Technology, Lanzhou University, Lanzhou 730000 (China); Ma, Peng-Cheng [The Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Urumqi 830011 (China); Shao, Yanming; Zhang, He; Gao, Weijie; Li, Yanfeng [State Key Laboratory of Applied Organic Chemistry, College of Chemistry and Chemical Engineering, Institute of Biochemical Engineering and Environmental Technology, Lanzhou University, Lanzhou 730000 (China)

    2014-01-30

    Highlights: • Amino-functionalized CoFe{sub 2}O{sub 4} nanoparticles were deposited on MWCNTs in one-pot. • Novel chitosan modified MWCNTs/CoFe{sub 2}O{sub 4} hybrid material were successfully synthesized. • The hybrid material had high specific surface area and abundant functional groups. • The hybrid material exhibited high adsorption properties for TBBPA and Pb(II). • The hybrid material was an efficient, eco-friendly and reusable adsorbent. -- Abstract: Multi-walled carbon nanotubes (MWCNTs) coated with magnetic amino-modified CoFe{sub 2}O{sub 4} (CoFe{sub 2}O{sub 4}–NH{sub 2}) nanoparticles (denoted as MNP) were prepared via a simple one-pot polyol method. The MNP composite was further modified with chitosan (CTS) to obtain a chitosan-functionalized MWCNT/CoFe{sub 2}O{sub 4}–NH{sub 2} hybrid material (MNP–CTS). The obtained hybrid materials were characterized by Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectrogram (FT-IR) Analysis and X-ray Photoelectron Spectroscopy (XPS) Analysis, Vibrating Sample Magnetometer (VSM) Analysis and the Brunauer–Emmett–Teller (BET) surface area method, respectively. The composites were tested as adsorbents for tetrabromobisphenol A (TBBPA) and Pb(II), and were investigated using a pseudo-second-order model. The adsorption of TBBPA was well represented by the Freundlich isotherm; the Langmuir model better described Pb(II) absorption. MNP–CTS adsorbed both TBBPA and Pb(II) (maximum adsorption capacities of 42.48 and 140.1 mg g{sup −1}, respectively) better than did MNP without CTS. Magnetic composite particles with adsorbed TBBPA and Pb(II) could be regenerated using 0.2 M NaOH solution and were separable from liquid media using a magnetic field.

  11. Magnetic fields in long-range alignment of functional hybrid soft materials

    Science.gov (United States)

    Majewski, Pawel; Gopinadhan, Manesh; Pelligra, Candice; Zhang, Shanju; Pfefferle, Lisa; Osuji, Chinedum

    2012-02-01

    We present a magnetic field-based method to impose long range order in self-assembled soft materials including polymer-nanowire composites, block copolymers and surfactant mesophases. We discuss the broad utility of this approach, indicating its advantages and limitations. Our method yields highly anisotropic materials with quality of alignment in many cases comparable to that of single crystals as assessed by X-ray scattering techniques. We take advantage of the high fidelity of alignment to systematically explore and characterize the anisotropic properties of these materials. We present a perspective for improving electron and hole transport, as well as exciton utilization in magnetically doped ZnO nanowire-polythiophene composites for photovoltaic applications by global alignment of the nanowires. For block copolymers, we focus on enhancing Li-ion transport in membranes with self-assembled cylindrical and lamellar morphology by alignment of the Li-conducting PEO domains.

  12. Pharmaceutical formulation of HSA hybrid coated iron oxide nanoparticles for magnetic drug targeting.

    Science.gov (United States)

    Zaloga, Jan; Pöttler, Marina; Leitinger, Gerd; Friedrich, Ralf P; Almer, Gunter; Lyer, Stefan; Baum, Eva; Tietze, Rainer; Heimke-Brinck, Ralph; Mangge, Harald; Dörje, Frank; Lee, Geoffrey; Alexiou, Christoph

    2016-04-01

    In this work we present a new formulation of superparamagnetic iron oxide nanoparticles (SPIONs) for magnetic drug targeting. The particles were reproducibly synthesized from current good manufacturing practice (cGMP) - grade substances. They were surface coated using fatty acids as anchoring molecules for human serum albumin. We comprehensively characterized the physicochemical core-shell structure of the particles using sophisticated methods. We investigated biocompatibility and cellular uptake of the particles using an established flow cytometric method in combination with microwave-plasma assisted atomic emission spectroscopy (MP-AES). The cytotoxic drug mitoxantrone was adsorbed on the protein shell and we showed that even in complex media it is slowly released with a close to zero order kinetics. We also describe an in vitro proof-of-concept assay in which we clearly showed that local enrichment of this SPION-drug conjugate with a magnet allows site-specific therapeutic effects.

  13. Room-Temperature Spin-Mediated Coupling in Hybrid Magnetic, Organic, and Oxide Structures and Devices

    Science.gov (United States)

    2015-12-07

    Spin-orbit interaction from low-symmetry localized defects in semiconductors, EPL ( Europhysics Letters ), (04 2012): 0. doi: 10.1209/0295-5075/98...nanostructures, EPL ( Europhysics Letters ), (09 2013): 57001. doi: 10.1209/0295-5075/103/57001 D. Backes, F. Macià, S. Bonetti, R. Kukreja, H. Ohldag...nanostructures, Europhysics Letters (04 2013) P. Warnicke, D. Bedau, M.-Y. Im, F. Macia, P. Fischer, D. A. Arena, A. D. Kent. Perpendicular magnetic

  14. New hybrid magnetic nanoparticles based on chitosan-maltose derivative for antitumor drug delivery.

    Science.gov (United States)

    Alupei, Liana; Peptu, Catalina Anisoara; Lungan, Andreea-Maria; Desbrieres, Jacques; Chiscan, Ovidiu; Radji, Sadia; Popa, Marcel

    2016-11-01

    The aim of the present study is to obtain, for the first time, polymer magnetic nanoparticles based on the chitosan-maltose derivative and magnetite. By chemically modifying the chitosan, its solubility in aqueous media was improved, which in turn facilitates the nanoparticles' preparation. Resulting polymers exhibit enhanced hydrophilia, which is an important factor in increasing the retention time of nanoparticles in the blood flow. The preparation of nanoparticles relied on the double crosslinking technique (ionic and covalent) in reverse emulsion which ensures the mechanical stability of the polymer carrier. The characterization of both the chitosan derivative and nanoparticles was accomplished by Fourier Transform Infrared Spectroscopy, Nuclear Magnetic Resonance Spectroscopy, Scanning Electron Microscopy, Transmission Electron Microscopy, Atomic Force Microscopy, Vibrating Sample Magnetometry, and Thermogravimetric Analysis. The evaluation of morphological, dimensional, structural, and magnetical properties, as well as thermal stability and swelling behavior of nanoparticles was made from the point of view of the polymer/magnetite ratio. The study of 5-Fluorouracil loading and release kinetics as well as evaluating the cytotoxicity and hemocompatibility of nanoparticles justify their adequate behavior in their potential use as devices for targeted transport of antitumor drugs.

  15. Nuclear magnetic shielding constants of liquid water: Insights from hybrid quantum mechanics/molecular mechanics models

    Science.gov (United States)

    Kongsted, Jacob; Nielsen, Christian B.; Mikkelsen, Kurt V.; Christiansen, Ove; Ruud, Kenneth

    2007-01-01

    We present a gauge-origin independent method for the calculation of nuclear magnetic shielding tensors of molecules in a structured and polarizable environment. The method is based on a combination of density functional theory (DFT) or Hartree-Fock wave functions with molecular mechanics. The method is unique in the sense that it includes three important properties that need to be fulfilled in accurate calculations of nuclear magnetic shielding constants: (i) the model includes electron correlation effects, (ii) the model uses gauge-including atomic orbitals to give gauge-origin independent results, and (iii) the effect of the environment is treated self-consistently using a discrete reaction-field methodology. The authors present sample calculations of the isotropic nuclear magnetic shielding constants of liquid water based on a large number of solute-solvent configurations derived from molecular dynamics simulations employing potentials which treat solvent polarization either explicitly or implicitly. For both the O17 and H1 isotropic shielding constants the best predicted results compare fairly well with the experimental data, i.e., they reproduce the experimental solvent shifts to within 4ppm for the O17 shielding and 1ppm for the H1 shielding.

  16. Scanning a DNA molecule for bound proteins using hybrid magnetic and optical tweezers.

    Directory of Open Access Journals (Sweden)

    Marijn T J van Loenhout

    Full Text Available The functional state of the genome is determined by its interactions with proteins that bind, modify, and move along the DNA. To determine the positions and binding strength of proteins localized on DNA we have developed a combined magnetic and optical tweezers apparatus that allows for both sensitive and label-free detection. A DNA loop, that acts as a scanning probe, is created by looping an optically trapped DNA tether around a DNA molecule that is held with magnetic tweezers. Upon scanning the loop along the λ-DNA molecule, EcoRI proteins were detected with ~17 nm spatial resolution. An offset of 33 ± 5 nm for the detected protein positions was found between back and forwards scans, corresponding to the size of the DNA loop and in agreement with theoretical estimates. At higher applied stretching forces, the scanning loop was able to remove bound proteins from the DNA, showing that the method is in principle also capable of measuring the binding strength of proteins to DNA with a force resolution of 0.1 pN/[Formula: see text]. The use of magnetic tweezers in this assay allows the facile preparation of many single-molecule tethers, which can be scanned one after the other, while it also allows for direct control of the supercoiling state of the DNA molecule, making it uniquely suitable to address the effects of torque on protein-DNA interactions.

  17. Flexible Riser Monitoring Using Hybrid Magnetic/Optical Strain Gage Techniques through RLS Adaptive Filtering

    Directory of Open Access Journals (Sweden)

    Pipa Daniel

    2010-01-01

    Full Text Available Flexible riser is a class of flexible pipes which is used to connect subsea pipelines to floating offshore installations, such as FPSOs (floating production/storage/off-loading unit and SS (semisubmersible platforms, in oil and gas production. Flexible risers are multilayered pipes typically comprising an inner flexible metal carcass surrounded by polymer layers and spiral wound steel ligaments, also referred to as armor wires. Since these armor wires are made of steel, their magnetic properties are sensitive to the stress they are subjected to. By measuring their magnetic properties in a nonintrusive manner, it is possible to compare the stress in the armor wires, thus allowing the identification of damaged ones. However, one encounters several sources of noise when measuring electromagnetic properties contactlessly, such as movement between specimen and probe, and magnetic noise. This paper describes the development of a new technique for automatic monitoring of armor layers of flexible risers. The proposed approach aims to minimize these current uncertainties by combining electromagnetic measurements with optical strain gage data through a recursive least squares (RLSs adaptive filter.

  18. Nuclear magnetic shielding constants of liquid water: insights from hybrid quantum mechanics/molecular mechanics models.

    Science.gov (United States)

    Kongsted, Jacob; Nielsen, Christian B; Mikkelsen, Kurt V; Christiansen, Ove; Ruud, Kenneth

    2007-01-21

    We present a gauge-origin independent method for the calculation of nuclear magnetic shielding tensors of molecules in a structured and polarizable environment. The method is based on a combination of density functional theory (DFT) or Hartree-Fock wave functions with molecular mechanics. The method is unique in the sense that it includes three important properties that need to be fulfilled in accurate calculations of nuclear magnetic shielding constants: (i) the model includes electron correlation effects, (ii) the model uses gauge-including atomic orbitals to give gauge-origin independent results, and (iii) the effect of the environment is treated self-consistently using a discrete reaction-field methodology. The authors present sample calculations of the isotropic nuclear magnetic shielding constants of liquid water based on a large number of solute-solvent configurations derived from molecular dynamics simulations employing potentials which treat solvent polarization either explicitly or implicitly. For both the (17)O and (1)H isotropic shielding constants the best predicted results compare fairly well with the experimental data, i.e., they reproduce the experimental solvent shifts to within 4 ppm for the (17)O shielding and 1 ppm for the (1)H shielding.

  19. Scanning a DNA molecule for bound proteins using hybrid magnetic and optical tweezers.

    Science.gov (United States)

    van Loenhout, Marijn T J; De Vlaminck, Iwijn; Flebus, Benedetta; den Blanken, Johan F; Zweifel, Ludovit P; Hooning, Koen M; Kerssemakers, Jacob W J; Dekker, Cees

    2013-01-01

    The functional state of the genome is determined by its interactions with proteins that bind, modify, and move along the DNA. To determine the positions and binding strength of proteins localized on DNA we have developed a combined magnetic and optical tweezers apparatus that allows for both sensitive and label-free detection. A DNA loop, that acts as a scanning probe, is created by looping an optically trapped DNA tether around a DNA molecule that is held with magnetic tweezers. Upon scanning the loop along the λ-DNA molecule, EcoRI proteins were detected with ~17 nm spatial resolution. An offset of 33 ± 5 nm for the detected protein positions was found between back and forwards scans, corresponding to the size of the DNA loop and in agreement with theoretical estimates. At higher applied stretching forces, the scanning loop was able to remove bound proteins from the DNA, showing that the method is in principle also capable of measuring the binding strength of proteins to DNA with a force resolution of 0.1 pN/[Formula: see text]. The use of magnetic tweezers in this assay allows the facile preparation of many single-molecule tethers, which can be scanned one after the other, while it also allows for direct control of the supercoiling state of the DNA molecule, making it uniquely suitable to address the effects of torque on protein-DNA interactions.

  20. Performance Analysis of a Hybrid One-Sided Magnetic Exciter Mounted on a Piezoelectric Stack

    Directory of Open Access Journals (Sweden)

    A. Nandi

    2010-01-01

    Full Text Available The present work proposes a non-contact hybrid exciter especially useful for harmonic excitation of lightly damped structures/rotors. In the proposed exciter an electromagnet is placed on a piezoelectric stack and the extension of the piezoelectric stack is made almost equal to the displacement of the structure using a simple tracking control. This largely eliminates stiffness coupling between the structure/rotor and the exciter and non-linearity in the excitation force due to the vibration of the structure/rotor. The stiffness and inertia of the piezoelectric stack is considered in the analysis. A SIMULINK model of the combined structure and the exciter is developed for a full time-domain simulation of the excitation system.

  1. Hybrid metal-dielectric, slow wave structure with magnetic coupling and compensation

    Energy Technology Data Exchange (ETDEWEB)

    Smirnov, A.V., E-mail: asmirnov@radiabeam.com [RadiaBeam Systems LLC, 1713 Stewart St., Santa Monica, CA 90404 (United States); Savin, E. [RadiaBeam Systems LLC, 1713 Stewart St., Santa Monica, CA 90404 (United States); National Research Nuclear University “MEPhI”, Moscow 115409 (Russian Federation)

    2016-06-01

    A number of electron beam vacuum devices such as small radiofrequency (RF) linear accelerators (linacs) and microwave traveling wave tubes (TWTs) utilize slow wave structures which are usually rather complicated in production and may require multi-step brazing and time consuming tuning. Fabrication of these devices becomes challenging at centimeter wavelengths, at large number of cells, and when a series or mass production of such structures is required. A hybrid, metal-dielectric, periodic structure for low gradient, low beam current applications is introduced here as a modification of Andreev’s disk-and-washer (DaW) structure. Compensated type of coupling between even and odd TE01 modes in the novel structure results in negative group velocity with absolute values as high as 0.1c–0.2c demonstrated in simulations. Sensitivity to material imperfections and electrodynamic parameters of the disk-and-ring (DaR) structure are considered numerically using a single cell model.

  2. Intelligent systems for conveyance and storage infrastructure

    Science.gov (United States)

    Juliano, Thomas M.; Meegoda, Jay N.

    2002-02-01

    The objectives of this research project are to identify, demonstrate, and validate intelligent systems for conveyance and storage infrastructure that will enable effective, affordable, real-time, remote measurement, analysis, and reporting of their structural health. Specifically, the project involves testing and validating smart pipes, which could indicate locations of structurally weak areas, i.e., where leaks are likely to occur, and the location of existing leaks for corrective action. During the initial phase of this project an extensive literature search was conducted to identify technologies that could potentially be used in intelligent systems. Although the search was primarily focused on new emerging smart technologies, consideration was also given to innovative uses of established structural monitoring or testing technologies. Four emerging technologies that can potentially locate structurally weak areas and predict incipient leaks were identified: electrically conducting composite pipes, electrochemistry-based corrosion sensors, instrumented cathodic protection, and distributed piezoelectric sensors. Also identified was an innovative use of acoustic emission techniques to track deterioration in pre-stressed concrete pipes by monitoring energy releases from breaking corroded pre-stressing wires. A review of each of these technologies is presented. During the next phase of the program one or more of these technologies will be tested and evaluated further.

  3. 38 CFR 3.808 - Automobiles or other conveyances; certification.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Automobiles or other....808 Automobiles or other conveyances; certification. (a) Entitlement. A certificate of eligibility for financial assistance in the purchase of one automobile or other conveyance in an amount not exceeding...

  4. 30 CFR 56.19066 - Maximum riders in a conveyance.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum riders in a conveyance. 56.19066 Section 56.19066 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoisting Procedures § 56.19066 Maximum riders in a conveyance. In shafts inclined over 45...

  5. 30 CFR 57.19066 - Maximum riders in a conveyance.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum riders in a conveyance. 57.19066 Section 57.19066 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoisting Procedures § 57.19066 Maximum riders in a conveyance. In shafts inclined over 45...

  6. Pneumatic Conveying of Seed Cotton: Minimum Velocity and Pressure Drop

    Science.gov (United States)

    Electricity is a major cost for cotton gins, representing approximately 20% of variable costs. Fans used for pneumatic conveying consume the majority of electricity at cotton gins. Development of control systems to reduce the air velocity used for conveying seed cotton could significantly decrease e...

  7. 30 CFR 56.6205 - Conveying explosives by hand.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Conveying explosives by hand. 56.6205 Section... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Explosives Transportation § 56.6205 Conveying explosives by hand. Closed, nonconductive containers shall be used to carry...

  8. 30 CFR 57.6205 - Conveying explosives by hand.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Conveying explosives by hand. 57.6205 Section... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Explosives Transportation-Surface and Underground § 57.6205 Conveying explosives by hand. Closed, nonconductive containers...

  9. Critical velocity and dynamic respondency of pipe conveying fluid

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Presents the calculation of critical velocity, natural frequencyand dynamic respondency of fluid-conveying pipe are calculated under different boundary conditions using finite element method, and the use of calculation results to design and research rocket pipes feeding fuel and watery turbine pipes conveying water etc.

  10. 7 CFR 766.353 - Voluntary conveyance of real property.

    Science.gov (United States)

    2010-01-01

    ... beyond those rights under an approved lease-purchase agreement executed according to § 766.154 or... writing; (7) Title insurance or title record for the security, if available; (8) Complete debt settlement... conveyance offer if the value of the property to be conveyed is less than the FLP debt; and (9) Any other...

  11. Hybridization and Magnetic Ground States in Heavy Fermion Compound CeRhIn5

    Institute of Scientific and Technical Information of China (English)

    XU Ying; WANG Jiang-Long; ZENG Zhi

    2005-01-01

    @@ The magnetic properties of CeRhIn5 are studied by first-principles calculation. Spin-orbit coupling is considered as well as different corrections including local density approximation plus on-site Coulomb interaction U (U = 1,1.5, 3 eV) and orbital polarization. The results show the existence of only moderate correlation in CeRhIn5 and Ce-4f electrons are on the border of localization and itinerancy. The effect of pressure by changing the volume of the unit cell is also studied.

  12. Electrical Control of Magnetic Dynamics in Hybrid Metal-Semiconductor Systems

    Science.gov (United States)

    2014-07-25

    substrate boundary conditions in ultra-thin BiFeO3 on SrTiO3, APL Materials, ( 2013): 0. doi: 10.1063/1.4827596 M. H. Fischer , A. Vaezi, A...boundary angles and types, Applied Physics Letters, ( 2011): 0. doi: 10.1063/1.3643155 Michael B. Katz, George W. Graham, Yingwen Duan, Hong Liu...Meeting, Dresden, Germany , Invited, March 33 – April 4, 2014. 26. D. C. Ralph, “Manipulating Magnetic Devices Using Spin Transfer Torque from the

  13. Investigation of a Co-Axial Dual-Mechanical Ports Flux-Switching Permanent Magnet Machine for Hybrid Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Wei Hua

    2015-12-01

    Full Text Available In this paper, a co-axial dual-mechanical ports flux-switching permanent magnet (CADMP-FSPM machine for hybrid electric vehicles (HEVs is proposed and investigated, which is comprised of two conventional co-axial FSPM machines, namely one high-speed inner rotor machine and one low-speed outer rotor machine and a non-magnetic ring sandwiched in between. Firstly, the topology and operation principle of the CADMP-FSPM machine are introduced; secondly, the control system of the proposed electronically-controlled continuously-variable transmission (E-CVT system is given; thirdly, the key design specifications of the CADMP-FSPM machine are determined based on a conventional dual-mechanical ports (DMP machine with a wound inner rotor. Fourthly, the performances of the CADMP-FSPM machine and the normal DMP machine under the same overall volume are compared, and the results indicate that the CADMP-FSPM machine has advantages over the conventional DMP machine in the elimination of brushes and slip rings, improved thermal dissipation conditions for the inner rotor, direct-driven operation, more flexible modes, lower cogging torque and torque ripple, lower total harmonic distortion (THD values of phase PM flux linkage and phase electro-motive force (EMF, higher torque output capability and is suitable for the E-CVT systems. Finally, the pros and cons of the CADMP-FSPM machine are highlighted. This paper lays a theoretical foundation for further research on CADMP-FSPM machines used for HEVs.

  14. Enhancement of DFT-calculations at petascale: Nuclear Magnetic Resonance, Hybrid Density Functional Theory and Car-Parrinello calculations

    Science.gov (United States)

    Varini, Nicola; Ceresoli, Davide; Martin-Samos, Layla; Girotto, Ivan; Cavazzoni, Carlo

    2013-08-01

    One of the most promising techniques used for studying the electronic properties of materials is based on Density Functional Theory (DFT) approach and its extensions. DFT has been widely applied in traditional solid state physics problems where periodicity and symmetry play a crucial role in reducing the computational workload. With growing compute power capability and the development of improved DFT methods, the range of potential applications is now including other scientific areas such as Chemistry and Biology. However, cross disciplinary combinations of traditional Solid-State Physics, Chemistry and Biology drastically improve the system complexity while reducing the degree of periodicity and symmetry. Large simulation cells containing of hundreds or even thousands of atoms are needed to model these kind of physical systems. The treatment of those systems still remains a computational challenge even with modern supercomputers. In this paper we describe our work to improve the scalability of Quantum ESPRESSO (Giannozzi et al., 2009 [3]) for treating very large cells and huge numbers of electrons. To this end we have introduced an extra level of parallelism, over electronic bands, in three kernels for solving computationally expensive problems: the Sternheimer equation solver (Nuclear Magnetic Resonance, package QE-GIPAW), the Fock operator builder (electronic ground-state, package PWscf) and most of the Car-Parrinello routines (Car-Parrinello dynamics, package CP). Final benchmarks show our success in computing the Nuclear Magnetic Response (NMR) chemical shift of a large biological assembly, the electronic structure of defected amorphous silica with hybrid exchange-correlation functionals and the equilibrium atomic structure of height Porphyrins anchored to a Carbon Nanotube, on many thousands of CPU cores.

  15. Potentiality and evocation in the meanings conveyed by the image

    Directory of Open Access Journals (Sweden)

    Solange Maria da Silva

    2013-08-01

    Full Text Available The aim of the investigation in this study was to understand how the evocation power is produced in an image and the influence of its incorporation into the meaning yielded by the visual content. A correlation was established between a list of properties drawn from these images, considering the end to which there are meant, and their ability to preserve the artistic appeal featured on them at the moment they were composed. Three key fundamentals were focused as presuppositions: a Nowadays, images are conveyed by the cultural industry in a frenetic and continuous path; b A great number of such images are capable of producing such an evocation power that can induce the viewer to changes in attitude, persuading him/her to uncontrolled consumerism and to standardization; c Others are capable of a considerable strength to evoke violence, through high dramatic and tragic contents. Data were collected from photography and pictorial works, sorted by criteria of their being built for a purpose. The analyses were effected by way of three correlations from their technical plasticity: image and a travel experience, image and urban chaos experience, image and aesthetic experience. The methodological procedures were built through the semiotic concepts as stated by the theory of signs by Charles S. Peirce and their dialogue with the notions of informativity, Jackobson?s language functions, and the constitution of poetic communication. The indications found in these images made it possible to infer on the presence of an immanent artistry that can either be responsible for instigating the receptor, as well as projecting him/her to the multiplicity of meanings found within the miscellaneous hybrid languages and styles typical of the complexity of contemporary society.

  16. Magnetism by interfacial hybridization and p-type doping of MoS(2) in Fe(4)N/MoS(2) superlattices: a first-principles study.

    Science.gov (United States)

    Feng, Nan; Mi, Wenbo; Cheng, Yingchun; Guo, Zaibing; Schwingenschlögl, Udo; Bai, Haili

    2014-03-26

    Magnetic and electronic properties of Fe4N(111)/MoS2(√3 × √3) superlattices are investigated by first-principles calculations, considering two models: (I) Fe(I)Fe(II)-S and (II) N-S interfaces, each with six stacking configurations. In model I, strong interfacial hybridization between Fe(I)/Fe(II) and S results in magnetism of monolayer MoS2, with a magnetic moment of 0.33 μB for Mo located on top of Fe(I). For model II, no magnetism is induced due to weak N-S interfacial bonding, and the semiconducting nature of monolayer MoS2 is preserved. Charge transfer between MoS2 and N results in p-type MoS2 with Schottky barrier heights of 0.5-0.6 eV. Our results demonstrate that the interfacial geometry and hybridization can be used to tune the magnetism and doping in Fe4N(111)/MoS2(√3 × √3) superlattices.

  17. Magnetism by interfacial hybridization and p-type doping of MoS2 in Fe4N/MoS2 superlattices: A first-principles study

    KAUST Repository

    Feng, Nan

    2014-03-26

    Magnetic and electronic properties of Fe4N(111)/MoS 2(√3 × √3) superlattices are investigated by first-principles calculations, considering two models: (I) FeIFe II-S and (II) N-S interfaces, each with six stacking configurations. In model I, strong interfacial hybridization between FeI/Fe II and S results in magnetism of monolayer MoS2, with a magnetic moment of 0.33 μB for Mo located on top of Fe I. For model II, no magnetism is induced due to weak N-S interfacial bonding, and the semiconducting nature of monolayer MoS2 is preserved. Charge transfer between MoS2 and N results in p-type MoS2 with Schottky barrier heights of 0.5-0.6 eV. Our results demonstrate that the interfacial geometry and hybridization can be used to tune the magnetism and doping in Fe4N(111)/MoS2(√3 × √3) superlattices. © 2014 American Chemical Society.

  18. Injectable In Situ Forming Hybrid Iron Oxide-Hyaluronic Acid Hydrogel for Magnetic Resonance Imaging and Drug Delivery

    NARCIS (Netherlands)

    Zhang, Y; Sun, Y.; Yang, X.; Hilborn, J.; Heerschap, A.; Ossipov, D.A.

    2014-01-01

    The development of multimodal in situ cross-linkable hyaluronic acid nanogels hybridized with iron oxide nanoparticles is reported. Utilizing a chemoselective hydrazone coupling reaction, the nanogels are converted to a macroscopic hybrid hydrogel without any additional reagent. Hydrophobic cargos

  19. Imaging Atherosclerosis with Hybrid Positron Emission Tomography/Magnetic Resonance Imaging

    DEFF Research Database (Denmark)

    Ripa, Rasmus Sejersten; Kjær, Andreas

    2015-01-01

    Noninvasive imaging of atherosclerosis could potentially move patient management towards individualized triage, treatment, and followup. The newly introduced combined positron emission tomography (PET) and magnetic resonance imaging (MRI) system could emerge as a key player in this context. Both...... PET and MRI have previously been used for imaging plaque morphology and function: however, the combination of the two methods may offer new synergistic opportunities. Here, we will give a short summary of current relevant clinical applications of PET and MRI in the setting of atherosclerosis....... Additionally, our initial experiences with simultaneous PET/MRI for atherosclerosis imaging are presented. Finally, future potential vascular applications exploiting the unique combination of PET and MRI will be discussed....

  20. Synthesis of Photoswitchable Magnetic Au–Fullerosome Hybrid Nanomaterials for Permittivity Enhancement Applications

    Directory of Open Access Journals (Sweden)

    Min Wang

    2015-08-01

    Full Text Available We designed and synthesized several nanomaterials 3 of three-layered core-shell (γ-FeOx@AuNP@[C60(>DPAF-C91or2]n nanoparticles (NPs. These NPs having e−-polarizable fullerosome structures located at the outer layer were fabricated from highly magnetic core-shell γ-FeOx@AuNPs. Fullerosomic polarization of 3 was found to be capable of causing a large amplification of material permittivity that is also associated with the photoswitching effect in the frequency range of 0.5‒4.0 GHz. Multilayered synthetic construction allows Förster resonance energy transfer (FRET of photoinduced accumulative surface plasmon resonance (SPR energy in the gold layer to the partially bilayered C60(>DPAF-C91or2-derived fullerosome membrane shell layer in a near-field of direct contact without producing radiation heat, which is commonly associated with SPR.

  1. Self-commissioning of permanent magnet synchronous machine drives using hybrid approach

    DEFF Research Database (Denmark)

    Basar, Mehmet Sertug

    2014-01-01

    Self-commissioning of permanent-magnet (PM) synchronous machines (PMSMs) is of prime importance in an industrial drive system because control performance and system stability depend heavily on the accurate machine parameter information. This article focuses on a combination of offline and online...... parameter estimation for a non-salient pole PMSM which eliminates the need for any prior knowledge on machine parameters. Stator resistance and inductance are first identified at standstill utilising fundamental and high-frequency excitation signals, respectively. A novel method has been developed...... and employed for inductance estimation. Then, stator resistance, inductance and PM flux are updated online using a recursive least-squares (RLS) algorithm. The proposed controllers are designed using MATLAB/Simulink® and implemented on d-Space® real-time system incorporating a commercially available PMSM drive....

  2. Preparation of Core-Shell Hybrid Materials by Producing a Protein Corona Around Magnetic Nanoparticles

    Science.gov (United States)

    Weidner, A.; Gräfe, C.; von der Lühe, M.; Remmer, H.; Clement, J. H.; Eberbeck, D.; Ludwig, F.; Müller, R.; Schacher, F. H.; Dutz, S.

    2015-07-01

    Nanoparticles experience increasing interest for a variety of medical and pharmaceutical applications. When exposing nanomaterials, e.g., magnetic iron oxide nanoparticles (MNP), to human blood, a protein corona consisting of various components is formed immediately. The composition of the corona as well as its amount bound to the particle surface is dependent on different factors, e.g., particle size and surface charge. The actual composition of the formed protein corona might be of major importance for cellular uptake of magnetic nanoparticles. The aim of the present study was to analyze the formation of the protein corona during in vitro serum incubation in dependency of incubation time and temperature. For this, MNP with different shells were incubated in fetal calf serum (FCS, serving as protein source) within a water bath for a defined time and at a defined temperature. Before and after incubation the particles were characterized by a variety of methods. It was found that immediately (seconds) after contact of MNP and FCS, a protein corona is formed on the surface of MNP. This formation led to an increase of particle size and a slight agglomeration of the particles, which was relatively constant during the first minutes of incubation. A longer incubation (from hours to days) resulted in a stronger agglomeration of the FCS incubated MNP. Quantitative analysis (gel electrophoresis) of serum-incubated particles revealed a relatively constant amount of bound proteins during the first minutes of serum incubation. After a longer incubation (>20 min), a considerably higher amount of surface proteins was determined for incubation temperatures below 40 °C. For incubation temperatures above 50 °C, the influence of time was less significant which might be attributed to denaturation of proteins during incubation. Overall, analysis of the molecular weight distribution of proteins found in the corona revealed a clear influence of incubation time and temperature on corona

  3. Preparation of Core-Shell Hybrid Materials by Producing a Protein Corona Around Magnetic Nanoparticles.

    Science.gov (United States)

    Weidner, A; Gräfe, C; von der Lühe, M; Remmer, H; Clement, J H; Eberbeck, D; Ludwig, F; Müller, R; Schacher, F H; Dutz, S

    2015-12-01

    Nanoparticles experience increasing interest for a variety of medical and pharmaceutical applications. When exposing nanomaterials, e.g., magnetic iron oxide nanoparticles (MNP), to human blood, a protein corona consisting of various components is formed immediately. The composition of the corona as well as its amount bound to the particle surface is dependent on different factors, e.g., particle size and surface charge. The actual composition of the formed protein corona might be of major importance for cellular uptake of magnetic nanoparticles. The aim of the present study was to analyze the formation of the protein corona during in vitro serum incubation in dependency of incubation time and temperature. For this, MNP with different shells were incubated in fetal calf serum (FCS, serving as protein source) within a water bath for a defined time and at a defined temperature. Before and after incubation the particles were characterized by a variety of methods. It was found that immediately (seconds) after contact of MNP and FCS, a protein corona is formed on the surface of MNP. This formation led to an increase of particle size and a slight agglomeration of the particles, which was relatively constant during the first minutes of incubation. A longer incubation (from hours to days) resulted in a stronger agglomeration of the FCS incubated MNP. Quantitative analysis (gel electrophoresis) of serum-incubated particles revealed a relatively constant amount of bound proteins during the first minutes of serum incubation. After a longer incubation (>20 min), a considerably higher amount of surface proteins was determined for incubation temperatures below 40 °C. For incubation temperatures above 50 °C, the influence of time was less significant which might be attributed to denaturation of proteins during incubation. Overall, analysis of the molecular weight distribution of proteins found in the corona revealed a clear influence of incubation time and temperature on

  4. Preparation and Characterization of Ferrofluid Stabilized with Biocompatible Chitosan and Dextran Sulfate Hybrid Biopolymer as a Potential Magnetic Resonance Imaging (MRI T2 Contrast Agent

    Directory of Open Access Journals (Sweden)

    Tzu-Chen Yen

    2012-10-01

    Full Text Available Chitosan is the deacetylated form of chitin and used in numerous applications. Because it is a good dispersant for metal and/or oxide nanoparticle synthesis, chitosan and its derivatives have been utilized as coating agents for magnetic nanoparticles synthesis, including superparamagnetic iron oxide nanoparticles (SPIONs. Herein, we demonstrate the water-soluble SPIONs encapsulated with a hybrid polymer composed of polyelectrolyte complexes (PECs from chitosan, the positively charged polymer, and dextran sulfate, the negatively charged polymer. The as-prepared hybrid ferrofluid, in which iron chloride salts (Fe3+ and Fe2+ were directly coprecipitated inside the hybrid polymeric matrices, was physic-chemically characterized. Its features include the z-average diameter of 114.3 nm, polydispersity index of 0.174, zeta potential of −41.5 mV and iron concentration of 8.44 mg Fe/mL. Moreover, based on the polymer chain persistence lengths, the anionic surface of the nanoparticles as well as the high R2/R1 ratio of 13.5, we depict the morphology of SPIONs as a cluster because chitosan chains are chemisorbed onto the anionic magnetite surfaces by tangling of the dextran sulfate. Finally, the cellular uptake and biocompatibility assays indicate that the hybrid polymer encapsulating the SPIONs exhibited great potential as a magnetic resonance imaging T2 contrast agent for cell tracking.

  5. Facile synthesis of magnetic ZnFe2O4-reduced graphene oxide hybrid and its photo-Fenton-like behavior under visible iradiation.

    Science.gov (United States)

    Yao, Yunjin; Qin, Jiacheng; Cai, Yunmu; Wei, Fengyu; Lu, Fang; Wang, Shaobin

    2014-06-01

    A magnetic ZnFe2O4-reduced graphene oxide (rGO) hybrid was successfully developed as a heterogeneous catalyst for photo-Fenton-like decolorization of various dyes using peroxymonosulfate (PMS) as an oxidant under visible light irradiation. Through an in situ chemical deposition and reduction, ZnFe2O4 nanoparticles (NPs) with an average size of 23.7 nm were anchored uniformly on rGO sheets to form a ZnFe2O4-rGO hybrid. The catalytic activities in oxidative decomposition of organic dyes were evaluated. The reaction kinetics, effect of ion species and strength, catalytic stability, degradation mechanism, as well as the roles of ZnFe2O4 and graphene were also studied. ZnFe2O4-rGO showed to be a promising photocatalyst with magnetism for the oxidative degradation of aqueous organic pollutants and simple separation. The combination of ZnFe2O4 NPs with graphene sheets leads to a much higher catalytic activity than pure ZnFe2O4. Graphene acted as not only a support and stabilizer for ZnFe2O4 to prevent them from aggregation, largely improving the charge separation in the hybrid material, but also a catalyst for activating PMS to produce sulfate radicals at the same time. The ZnFe2O4-rGO hybrid exhibited stable performance without losing activity after five successive runs.

  6. Yolk-shell hybrid nanoparticles with magnetic and pH-sensitive properties for controlled anticancer drug delivery

    Science.gov (United States)

    Li, Shunxing; Zheng, Jianzhong; Chen, Dejian; Wu, Yijin; Zhang, Wuxiang; Zheng, Fengying; Cao, Jing; Ma, Heran; Liu, Yaling

    2013-11-01

    A facile and effective way for the preparation of nano-sized Fe3O4@graphene yolk-shell nanoparticles via a hydrothermal method is developed. Moreover, the targeting properties of the materials for anticancer drug (doxorubicin hydrochloride) delivery are investigated. Excitingly, these hybrid materials possess favorable dispersibility, good superparamagnetism (the magnetic saturation value is 45.740 emu g-1), high saturated loading capacity (2.65 mg mg-1), and effective loading (88.3%). More importantly, the composites exhibit strong pH-triggered drug release response (at the pH value of 5.6 and 7.4, the release rate was 24.86% and 10.28%, respectively) and good biocompatibility over a broad concentration range of 0.25-100 μg mL-1 (the cell viability was 98.52% even at a high concentration of 100 μg mL-1) which sheds light on their potentially bright future for bio-related applications.

  7. Conveying Environmental Issues with and through Art

    Science.gov (United States)

    Abeles, K. V.

    2016-12-01

    Art has the ability to convey serious environmental issues, inspiring people to respond personally Kim Abeles is an artist who crosses disciplines and media to explore and map urban and global environments. She has exhibited with a unique range of collaborators including smog control agencies, science and natural history museums, and educational and healthcare professionals. Her work has been exhibited across the world. Since 1985, her art projects have explored topics including air and water pollution, refuse and recycling, and consumption. This presentation will discuss three unconventional art projects from inspiration to impact including results. Most can be replicated in any educational or community setting to increase understanding of environmental issues. Abeles's Smog Collector series makes images from polluted air, helping viewers to see the air they breathe in an accessible, engaging, and visceral way. In addition to exhibitions of this work in art museums and galleries, it has been displayed in vehicle emissions testing booths to increase awareness and behavior change, and the process has been taught as curriculum in schools. Abeles sees consumption as a primary problem that leads to environmental decay. Her Paper Person was made from the California Science Center's paper trash that was generated on a single day by their visitors (Earth Day 2009). The 40' x 48' sculpture is in the permanent collection of the CSC, and the text accompanying the artwork prompts visitors to consider bringing their lunches next time instead of buying fast food. Similarly, Paper Person (Harvard Westlake School) is a figurative sculpture made of one week of students' paper trash. Exhibited in the school's gallery, students were able to identify their own scraps, and to see how their consumption and trash adds up. When the artwork was exhibited, the school decided to change the way they handled their lunch preparation, bottled water, and trash. gallery-of-solutions was a recent

  8. Hybrids of Iron-Filled Multiwall Carbon Nanotubes and Anticancer Agents as Potential Magnetic Drug Delivery Systems: In Vitro Studies against Human Melanoma, Colon Carcinoma, and Colon Adenocarcinoma

    Directory of Open Access Journals (Sweden)

    Sławomir Boncel

    2017-01-01

    Full Text Available Cell type, morphology, and functioning are key variables in the construction of efficient “drug-vehicle” hybrids in magnetic drug delivery. Iron-encapsulated multiwall carbon nanotubes (Fe@MWCNTs appear as promising candidates for theranostics due to in situ chemical catalytic vapor deposition (c-CVD synthesis, straightforward organic functionalization, and nanoneedle (1D behavior. Here, model hybrids were synthesized by exploring C-sp2 chemistry ((1+2-cycloaddition of nitrenes and amidation of the outer MWCNT walls combined with anticancer agents, that is, 5-fluorouracil (5FU, purpurin (Purp, and 1,8-naphthalimide DNA intercalators (NIDIs, via linkers. Analyses of the Fe@MWCNT vehicles by SEM, TEM, and Raman spectroscopy revealed their morphology while Mössbauer spectroscopy confirmed the presence of encapsulated ferromagnetic iron-based nanodomains. Cytotoxicity of the hybrids was studied using a 24 h MTS assay combined with the apoptosis and life cycle assays against human melanoma (Me45, colon carcinoma (HCT116+, and colon adenocarcinoma (Caco-2. The cells had different sensitivity to the vehicles themselves as well as to the hybrids. MWCNT-based covalent hybrids of 5FU and Purp emerged as the most promising systems against Me45 and HCT116+ cell lines with the highest in vitro cytotoxicity and proapoptotic activity. Furthermore, nanotubes bearing 4-nitro- and 4-(N-morpholinyl-1,8-naphthalimide DNA intercalators appear as a promising candidate for the treatment of Caco-2.

  9. Triazolyl-based copper-molybdate hybrids: from composition space diagram to magnetism and catalytic performance.

    Science.gov (United States)

    Senchyk, Ganna A; Lysenko, Andrey B; Babaryk, Artem A; Rusanov, Eduard B; Krautscheid, Harald; Neves, Patrícia; Valente, Anabela A; Gonçalves, Isabel S; Krämer, Karl W; Liu, Shi-Xia; Decurtins, Silvio; Domasevitch, Konstantin V

    2014-10-06

    The multicomponent mixed-metal Cu(II)/Mo(VI) oxides/1,3-bis(1,2,4-triazol-4-yl)adamantane (tr2ad) system was thoroughly studied employing a compositional diagram approach. The concept allowed us to prepare three layered copper-molybdate hybrid solids [Cu(II)2(tr2ad)4](Mo8O26) (1), [Cu4(II)(μ4-O)(tr2ad)2(MoO4)3]·7.5H2O (2), and [Cu(I)2(tr2ad)2](Mo2O7)·H2O (3), and to elucidate the relationship between initial reagent concentration/stoichiometry and the stability of the resultant structural motifs. Compounds 1 and 2 were found to dominate throughout a wide crystallization range of the concentration triangle, whereas compound 3 was formed by redox processes in the narrow crystallization area having a high excess of Cu(OAc)2·H2O. Independent experiments carried out with Cu(OAc)2 and (NH4)6Mo7O24 in the absence of tr2ad, under the same conditions, revealed the formation of low-valent and bimetallic oxides, including Cu2O, MoO2, Cu(Mo3O10)·H2O, and Cu3(MoO4)2(OH)2. Compounds 1 and 2 show high thermal and chemical stability as examined as catalysts in the epoxidation of cis-cyclooctene and the oxidation of benzyl alcohol (BzOH) with different types of oxidants. The oxidation reaction of BzOH using tert-butyl hydroperoxide (TBHP) as the oxidant, in the presence of 1 or 2, led to benzaldehyde and benzoic acid (PhCO2H), with the latter being formed in up to 90% yield at 24 h. The results suggest that 1 and 2 may be favorable heterogeneous catalysts for the synthesis of PhCO2H. Whereas compound 1 only reveals a weak ferromagnetic coupling between neighboring Cu(II) centers (J = 0.41 cm(-1)), compound 2 shows distinct intracluster antiferromagnetic exchange interactions (J = -29.9 cm(-1), J' = -25.7 cm(-1)), which consequently results in a diamagnetic ground state.

  10. Nonlinear Dynamics of Magnons observed by AC Spin Pumping in Magnetic Hybrid Structures

    Science.gov (United States)

    Vilela-Leao, L. H.; Cunha, R. O.; Azevedo, A.; Rodriguez-Suarez, R. L.; Rezende, S. M.

    2015-03-01

    The electron spin degree of freedom constitutes the basic means to carry and store information in the field of spintronics. In the spin pumping process, the microwave driven magnetization dynamics in a ferromagnetic film generates a spin current in an attached metallic layer that can be converted into a charge current by means of the inverse spin Hall effect and detected by a voltage signal. While the time independent component (DC) of the spin current has been widely investigated in a variety of material structures, recently it has been recognized that the alternating current (AC) component is much larger, though more difficult to detect, and has many attractive features. We report experiments with microwave driven DC and AC spin pumping in bilayers made of the insulating ferrimagnet yttrium iron garnet (YIG) and platinum that reveal the nonlinear dynamics involving the driven mode and a pair of magnon modes with half frequency. This process occurs when the frequency is lowered below a critical value so that a three-magnon splitting process with energy conservation is made possible. The results are explained by a model with coupled nonlinear equations describing the time evolution of the magnon modes.

  11. Tuning the magnetic interactions in GaAs:Mn/MnAs hybrid structures by controlling shape and position of MnAs nanoclusters

    Energy Technology Data Exchange (ETDEWEB)

    Elm, Matthias Thomas

    2010-07-01

    In this work the magnetic properties of hexagonal MnAs nanoclusters and their influence on the transport properties of GaAs:Mn /MnAs hybrid structures were studied. Various arrangements of isolated nanoclusters and cluster chains were grown on (111)B-GaAs substrates by SA-MOVPE. The first part of this work deals with the manufacturing process of the different cluster arrangements investigated. By a suitable pre-structuring of the substrate it was possible to influence the cluster size, cluster shape and cluster position systematically. Preparing various arrangements it could be shown that the hexagonal nanoclusters prefer to grow along their a-axes. In the second part, the magnetic properties of the nanoclusters were studied. Ferromagnetic resonance (FMR) measurements show a hard magnetic axis perpendicular to the sample plane, i.e. parallel to the c-axis. By measurements, where the magnetic field was rotated in the sample plane, it could be demonstrated that the orientation of the magnetization can be forced into a certain direction by controlling the cluster shape. These results are confirmed by measurements using magnetic force microscopy. The third part deals with the influence of the nanoclusters and their arrangement on the transport properties of the GaAs:Mn matrix. For temperatures above 30 K the structures investigated show positive as well as negative magnetoresistance effects, which are typical for granular GaAs:Mn/MnAs hybrid structures. This behaviour can be explained in the context of transport in extended band states. The size of the magnetoresistance effects correlates strongly with the respective cluster arrangement of the sample. This behaviour has been predicted theoretically and could be confirmed experimentally in the context of this work. Below 30 K large positive magnetoresistance effects show up for the regular cluster arrangements, which cannot be observed for hybrid structures with random cluster distributions. These large positive

  12. A Multi-Level Grid Interactive Bi-directional AC/DC-DC/AC Converter and a Hybrid Battery/Ultra-capacitor Energy Storage System with Integrated Magnetics for Plug-in Hybrid Electric Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Onar, Omer C [ORNL

    2011-01-01

    This study presents a bi-directional multi-level power electronic interface for the grid interactions of plug-in hybrid electric vehicles (PHEVs) as well as a novel bi-directional power electronic converter for the combined operation of battery/ultracapacitor hybrid energy storage systems (ESS). The grid interface converter enables beneficial vehicle-to-grid (V2G) interactions in a high power quality and grid friendly manner; i.e, the grid interface converter ensures that all power delivered to/from grid has unity power factor and almost zero current harmonics. The power electronic converter that provides the combined operation of battery/ultra-capacitor system reduces the size and cost of the conventional ESS hybridization topologies while reducing the stress on the battery, prolonging the battery lifetime, and increasing the overall vehicle performance and efficiency. The combination of hybrid ESS is provided through an integrated magnetic structure that reduces the size and cost of the inductors of the ESS converters. Simulation and experimental results are included as prove of the concept presenting the different operation modes of the proposed converters.

  13. A non-axial superconducting magnet design for optimized patient access and minimal SAD for use in a Linac-MR hybrid: proof of concept

    Science.gov (United States)

    Yaghoobpour Tari, Shima; Wachowicz, Keith; Fallone, B. Gino

    2017-04-01

    A prototype rotating hybrid magnetic resonance imaging system and linac has been developed to allow for simultaneous imaging and radiation delivery parallel to B 0. However, the design of a compact magnet capable of rotation in a small vault with sufficient patient access and a typical clinical source-to-axis distance (SAD) is challenging. This work presents a novel superconducting magnet design as a proof of concept that allows for a reduced SAD and ample patient access by moving the superconducting coils to the side of the yoke. The yoke and pole-plate structures are shaped to direct the magnetic flux appropriately. The outer surface of the pole plate is optimized subject to the minimization of a cost function, which evaluates the uniformity of the magnetic field over an ellipsoid. The magnetic field calculations required in this work are performed with the 3D finite element method software package Opera-3D. Each tentative design strategy is virtually modeled in this software package, which is externally controlled by MATLAB, with its key geometries defined as variables. The optimization variables are the thickness of the pole plate at control points distributed over the pole plate surface. A novel design concept as a superconducting non-axial magnet is introduced, which could create a large uniform B 0 magnetic field with fewer geometric restriction. This non-axial 0.5 T superconducting magnet has a moderately reduced SAD of 123 cm and a vertical patient opening of 68 cm. This work is presented as a proof of principle to investigate the feasibility of a non-axial magnet with the coils located around the yoke, and the results encourage future design optimizations to maximize the benefits of this non-axial design.

  14. A non-axial superconducting magnet design for optimized patient access and minimal SAD for use in a Linac-MR hybrid: proof of concept.

    Science.gov (United States)

    Yaghoobpour Tari, Shima; Wachowicz, Keith; Gino Fallone, B

    2017-04-21

    A prototype rotating hybrid magnetic resonance imaging system and linac has been developed to allow for simultaneous imaging and radiation delivery parallel to B 0. However, the design of a compact magnet capable of rotation in a small vault with sufficient patient access and a typical clinical source-to-axis distance (SAD) is challenging. This work presents a novel superconducting magnet design as a proof of concept that allows for a reduced SAD and ample patient access by moving the superconducting coils to the side of the yoke. The yoke and pole-plate structures are shaped to direct the magnetic flux appropriately. The outer surface of the pole plate is optimized subject to the minimization of a cost function, which evaluates the uniformity of the magnetic field over an ellipsoid. The magnetic field calculations required in this work are performed with the 3D finite element method software package Opera-3D. Each tentative design strategy is virtually modeled in this software package, which is externally controlled by MATLAB, with its key geometries defined as variables. The optimization variables are the thickness of the pole plate at control points distributed over the pole plate surface. A novel design concept as a superconducting non-axial magnet is introduced, which could create a large uniform B 0 magnetic field with fewer geometric restriction. This non-axial 0.5 T superconducting magnet has a moderately reduced SAD of 123 cm and a vertical patient opening of 68 cm. This work is presented as a proof of principle to investigate the feasibility of a non-axial magnet with the coils located around the yoke, and the results encourage future design optimizations to maximize the benefits of this non-axial design.

  15. Research on Hybrid Vehicle Drivetrain

    Science.gov (United States)

    Xie, Zhongzhi

    Hybrid cars as a solution to energy saving, emission reduction measures, have received widespread attention. Motor drive system as an important part of the hybrid vehicles as an important object of study. Based on the hybrid electric vehicle powertrain control system for permanent magnet synchronous motor as the object of study. Can be applied to hybrid car compares the characteristics of traction motors, chose permanent magnet synchronous Motors as drive motors for hybrid vehicles. Building applications in hybrid cars in MATLAB/Simulink simulation model of permanent-magnet synchronous motor speed control system and analysis of simulation results.

  16. 27 CFR 19.588 - Construction of bulk conveyances.

    Science.gov (United States)

    2010-04-01

    ... compartment) shall be so arranged that it can be completely drained. (3) Each tank car or tank truck shall... device, for carrying required marks or brands shall be provided on each bulk conveyance. (6)...

  17. [Title conveyance: Fish Springs National Wildlife Refuge: Papers and documentation

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This is a collection of documents pertaining to title conveyance of Fish Springs National Wildlife Refuge. The following material is included; tract description,...

  18. Magnetic, optical and relaxometric properties of organically coated gold-magnetite (Au-Fe{sub 3}O{sub 4}) hybrid nanoparticles for potential use in biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Umut, E., E-mail: eumut@hacettepe.edu.tr [Hacettepe University Physics Engineering Department, 06800 Beytepe-Ankara (Turkey); Pineider, F. [INSTM and Universita degli Studi di Firenze, Department of Chemistry, Via della Lastruccia 3, 50019 Sesto Fiorentino (Italy); CNR-ISTM Padova, 35131 Padova (Italy); Arosio, P. [INSTM and Universita degli Studi di Milano, Department of Molecular Sciences Applied to Biosystems (DISMAB), I-20134 Milano (Italy); Sangregorio, C. [INSTM and Universita degli Studi di Firenze, Department of Chemistry, Via della Lastruccia 3, 50019 Sesto Fiorentino (Italy); CNR-ISTM Milano, 50123 via C.Golgi 19, 20133 Milano (Italy); Corti, M. [INSTM, CNISM and Dipartimento di Fisica ' A.Volta' , Univ. di Pavia, Via Bassi 6, I-27100 Pavia (Italy); Tabak, F. [Hacettepe University Physics Engineering Department, 06800 Beytepe-Ankara (Turkey); Lascialfari, A. [INSTM and Universita degli Studi di Milano, Department of Molecular Sciences Applied to Biosystems (DISMAB), I-20134 Milano (Italy); INSTM, CNISM and Dipartimento di Fisica ' A.Volta' , Univ. di Pavia, Via Bassi 6, I-27100 Pavia (Italy); Ghigna, P. [INSTM and Dipartimento di Chimica Univ. di Pavia, v.le Taramelli 13, I-27100 Pavia (Italy)

    2012-08-15

    We present the magnetic, optical and relaxometric properties of multifunctional Au-Fe{sub 3}O{sub 4} hybrid nanoparticles (HNPs), as possible novel contrast agents (CAs) for magnetic resonance imaging (MRI). The HNPs have been synthesized by wet chemical methods in heterodimer and core-shell geometries and capped with oleylamine. Structural characterization of the samples have been made by X-ray diffraction and transmission electron microscopy, while magnetic properties have been investigated by means of Superconducting Quantum Interference Device-SQUID magnetometry experiments. As required for MRI applications using negative CAs, the samples resulted superparamagnetic at room temperature and well above their blocking temperatures. Optical properties have been investigated by analyzing the optical absorbtion spectra collected in UV-visible region. Relaxometric measurements have been performed on organic suspensions of HNPs and Nuclear Magnetic Resonance (NMR) dispersion curves have been obtained by measuring the longitudinal 1/T{sub 1} and transverse 1/T{sub 2} relaxation rates of solvent protons in the range 10 kHz/300 MHz at room temperature. NMR relaxivities r{sub 1} and r{sub 2} have been compared with ENDOREM{sup Registered-Sign }, one of the commercial superparamagnetic iron oxide based MRI contrast agents. MRI contrast enhancement efficiencies have been investigated also by examining T{sub 2}-weighted MR images of suspensions. The experimental results suggest that the nanoparticles' suspensions are good candidates as negative CAs. - Highlights: Black-Right-Pointing-Pointer Au-Fe{sub 3}O{sub 4} superparamagnetic Hybrid NanoPrticles (HNPs) enhance contrast in MRI. Black-Right-Pointing-Pointer HNPs are expected to have optical activities through observed SPR phenomena. Black-Right-Pointing-Pointer HNPs have relatively high magnetic anisotropy originating from Au/Fe{sub 3}O{sub 4} interface. Black-Right-Pointing-Pointer Magnetic dipolar interactions have

  19. Automated segmentation of the quadratus lumborum muscle from magnetic resonance images using a hybrid atlas based - geodesic active contour scheme.

    Science.gov (United States)

    Jurcak, V; Fripp, J; Engstrom, C; Walker, D; Salvado, O; Ourselin, S; Crozier, S

    2008-01-01

    This study presents a novel method for the automatic segmentation of the quadratus lumborum (QL) muscle from axial magnetic resonance (MR) images using a hybrid scheme incorporating the use of non-rigid registration with probabilistic atlases (PAs) and geodesic active contours (GACs). The scheme was evaluated on an MR database of 7mm axial images of the lumbar spine from 20 subjects (fast bowlers and athletic controls). This scheme involved several steps, including (i) image pre-processing, (ii) generation of PAs for the QL, psoas (PS) and erector spinae+multifidus (ES+MT) muscles and (iii) segmentation, using 3D GACs initialized and constrained by the propagation of the PAs using non-rigid registration. Pre-processing of the images involved bias field correction based on local entropy minimization with a bicubic spline model and a reverse diffusion interpolation algorithm to increase the slice resolution to 0.98 x 0.98 x 1.75mm. The processed images were then registered (affine and non-rigid) and used to generate an average atlas. The PAs for the QL, PS and ES+MT were then generated by propagation of manual segmentations. These atlases were further analysed with specialised filtering to constrain the QL segmentation from adjacent non-muscle tissues (kidney, fat). This information was then used in 3D GACs to obtain the final segmentation of the QL. The automatic segmentation results were compared with the manual segmentations using the Dice similarity metric (DSC), with a median DSC for the right and left QL muscles of 0.78 (mean = 0.77, sd=0.07) and 0.75 (mean =0.74, sd=0.07), respectively.

  20. Studies on positive conveying in helically channeled single screw extruders

    Directory of Open Access Journals (Sweden)

    L. Pan

    2012-07-01

    Full Text Available A solids conveying theory called double-flight driving theory was proposed for helically channeled single screw extruders. In the extruder, screw channel rotates against static barrel channel, which behaves as cooperative embedded twin-screws for the positive conveying. They turn as two parallel arc plates, between which an arc-plate solid-plug was assumed. By analyzing the forces on the solid-plug in the barrel channel and screw channel, the boundary conditions when the solid-plug is waived of being cut off on barrel wall, were found to have the capacity of the positive conveying. Experimental data were obtained using a specially designed extruder with a helically channeled barrel in the feeding zone and a pressure-adjustable die. The effects of the barrel channel geometry and friction coefficients on the conveying mechanism were presented and compared with the experimental results. The simulations showed that the positive conveying could be achieved after optimizing extruder designs. Compared with the traditional design with the friction-drag conveying, the throughput is higher while screw torque and energy consumption are decreased. Besides, the design criteria of the barrel channel were also discussed.

  1. Magnetic recoverable MnFe₂O₄ and MnFe₂O₄-graphene hybrid as heterogeneous catalysts of peroxymonosulfate activation for efficient degradation of aqueous organic pollutants.

    Science.gov (United States)

    Yao, Yunjin; Cai, Yunmu; Lu, Fang; Wei, Fengyu; Wang, Xiaoyao; Wang, Shaobin

    2014-04-15

    Magnetic iron based materials are generally effective for many catalytic reactions and can be magnetically recovered after application, showing advantages than other metal oxides. In the present work, magnetic MnFe2O4 nanoparticle and MnFe2O4-reduced graphene oxide (rGO) hybrid were prepared and used as catalysts to activate peroxymonosulfate (PMS) to oxidatively degrade various organic pollutants in water. From a process of chemical deposition and reduction, MnFe2O4-rGO hybrids were produced with nanosized MnFe2O4 particles (ca. 13.2 nm). It was found that MnFe2O4 or MnFe2O4-rGO presented high activity in activating PMS to produce sulfate radicals for degradation of organic dyes (Methyl violet, Methyl orange, Methylene blue, Orange II and Rhodamine B) and could be separated with a magnet without any loss. The reaction kinetics, effect of different ion species CL(-),HCO3(-),CH3COO(-)and NO3(-) and Cl(-) strength, reaction temperature (25-65°C), catalytic stability, as well as degradation mechanism were comprehensively studied. The lower activation energy on MnFe2O4-rGO (25.7 kJ/mol) justify the higher chemical performance than that of MnFe2O4 (31.7 kJ/mol), suggesting that graphene plays a significant role in the enhanced degradation of dyes. More importantly, the as-prepared MnFe2O4 and MnFe2O4-rGO hybrid exhibited stable performance to remove the organic pollutants in wastewater with easy recycling and good stability by successive degradation experiments.

  2. Magnetic Fe3O4/Ag Hybrid Nanoparticles as Surface-Enhanced Raman Scattering Substrate for Trace Analysis of Furazolidone in Fish Feeds

    Directory of Open Access Journals (Sweden)

    Wansong Yu

    2014-01-01

    Full Text Available Nanoparticles (NPs composed of ferromagnetic and noble metal materials show dual functions of magnetic activity and local surface plasmon response and have great potential as substrates for surface-enhanced Raman scattering (SERS in trace analysis. Easy-to-prepare superparamagnetic Fe3O4/Ag hybrid NPs were synthesized and optimized by adjusting the ratio of silver particles aggregated with APTMS-modified Fe3O4 NPs. The hybrid NPs were assembled under an external magnetic field before being used as substrate for SERS analysis. The SERS spectral features of furazolidone standard solution were clearly identified at concentrations as low as 40 ng mL−1, and furazolidone in fish feeds could be detected at 500 ng g−1. The results indicated that the Fe3O4/Ag hybrid NPs as SERS substrates had a great potential for detection of trace amount of furazolidone and other prohibited or restricted antibiotics in the animal and fish feeds.

  3. Magnetism and magnetic materials

    CERN Document Server

    Coey, J M D

    2010-01-01

    Covering basic physical concepts, experimental methods, and applications, this book is an indispensable text on the fascinating science of magnetism, and an invaluable source of practical reference data. Accessible, authoritative, and assuming undergraduate familiarity with vectors, electromagnetism and quantum mechanics, this textbook is well suited to graduate courses. Emphasis is placed on practical calculations and numerical magnitudes - from nanoscale to astronomical scale - focussing on modern applications, including permanent magnet structures and spin electronic devices. Each self-contained chapter begins with a summary, and ends with exercises and further reading. The book is thoroughly illustrated with over 600 figures to help convey concepts and clearly explain ideas. Easily digestible tables and data sheets provide a wealth of useful information on magnetic properties. The 38 principal magnetic materials, and many more related compounds, are treated in detail

  4. Injectable In Situ Forming Hybrid Iron Oxide-Hyaluronic Acid Hydrogel for Magnetic Resonance Imaging and Drug Delivery

    NARCIS (Netherlands)

    Zhang, Y; Sun, Y.; Yang, X.; Hilborn, J.; Heerschap, A.; Ossipov, D.A.

    2014-01-01

    The development of multimodal in situ cross-linkable hyaluronic acid nanogels hybridized with iron oxide nanoparticles is reported. Utilizing a chemoselective hydrazone coupling reaction, the nanogels are converted to a macroscopic hybrid hydrogel without any additional reagent. Hydrophobic cargos r

  5. Charge transfer in Li/CFx-silver vanadium oxide hybrid cathode batteries revealed by solid state 7Li and 19F nuclear magnetic resonance spectroscopy

    Science.gov (United States)

    Sideris, Paul J.; Yew, Rowena; Nieves, Ian; Chen, Kaimin; Jain, Gaurav; Schmidt, Craig L.; Greenbaum, Steve G.

    2014-05-01

    Solid state 7Li and 19F magic angle spinning nuclear magnetic resonance (MAS NMR) experiments are conducted on several cathodes containing CFx-Silver vanadium oxide (CFx-Ag2V4O11) hybrid cathodes discharged to 50% depth of discharge (DoD) and stored at their open-circuit voltage for a period of one and three months. Three carbonaceous sources for the CFx phase are investigated: petroleum coke-based, fibrous, and mixed fibrous. For each hybrid cathode, a measurable increase in the relative amount of lithium fluoride is observed after a three month resting period in both the 7Li and 19F NMR spectra. These changes are attributed to lithium ion migration from the silver vanadium oxide to the CFx phase during the resting period, and help clarify the mechanism behind high power handling capability of this cathode.

  6. Two novel POM-based inorganic-organic hybrid compounds: synthesis, structures, magnetic properties, photodegradation and selective absorption of organic dyes.

    Science.gov (United States)

    Dui, Xue-Jing; Yang, Wen-Bin; Wu, Xiao-Yuan; Kuang, Xiaofei; Liao, Jian-Zhen; Yu, Rongmin; Lu, Can-Zhong

    2015-05-28

    The hydrothermal reactions of a mixture of (NH4)6Mo7O24·4H2O, Cu(Ac)2·H2O and 3-bpo ligands at different temperatures result in the isolation of two novel inorganic-organic hybrid materials containing different but related isopolymolybdate units, [Cu(3-bpo)(H2O)(Mo4O13)]·3H2O () and [Cu2(3-bpo)2(Mo6O20)] (). The {Mo4O13}n chains in and unprecedented [Mo6O20](4-) isopolyhexamolybdate anions in are linked by octahedral Cu(2+) ions into two-dimensional hybrid layers. Interestingly, 3-bpo ligands in both and are located on either side of these hybrid layers and serve as arched footbridges to link Cu(ii) ions in the layer via pyridyl N-donors, and at the same time connect these hybrid layers into 3D supramolecular frameworks via weak MoNoxadiazole bonds. Another important point for is that water clusters are filled in the 1D channels surrounded by isopolytetramolybdate units. In addition, dye adsorption and photocatalytic properties of and magnetic properties of have been investigated. The results indicated that complex is not only a good heterogeneous photocatalyst in the degradation of methyl orange (MO) and methylene blue (MB), but also has high absorption capacity of MB at room temperature and can selectively capture MB molecules from binary mixtures of MB/MO or MB/RhB. All MB molecules absorbed on can be completely released and photodegraded in the presence of adequate peroxide. The temperature dependence of magnetic susceptibility revealed that complex exhibits antiferromagnetic ordering at about 5 K, and a spin-flop transition was observed at about 5.8 T at 2 K, indicating metamagnetic-like behaviour from antiferromagnetic to ferromagnetic phases.

  7. A contribution on the investigation of the dynamic behavior of rotating shafts with a Hybrid Magnetic Bearing Concept (HMBC) for blower application

    Energy Technology Data Exchange (ETDEWEB)

    Gronek, Martin, E-mail: MGronek@hs-zigr.d [HOCHSCHULE ZITTAU/GOERLITZ-University of Applied Sciences, Institute of Process Technology, Process Automation and Measuring Technology (IPM), Department Mechatronical Systems, Theodor-Koerner-Allee 16, 02763 Zittau (Germany); Rottenbach, Torsten; Worlitz, Frank [HOCHSCHULE ZITTAU/GOERLITZ-University of Applied Sciences, Institute of Process Technology, Process Automation and Measuring Technology (IPM), Department Mechatronical Systems, Theodor-Koerner-Allee 16, 02763 Zittau (Germany)

    2010-10-15

    Within a subproject of the RAPHAEL-Program, which was part of the 6th EURATOM Framework Program supervised by the European Commission, it was investigated whether the use of a Hybrid Magnetic Bearing Concept (HMBC) will be beneficial for a blower application. Within the RAPHAEL program, the subproject 'Component Development' is dealing with R and D of components of High Temperature Reactor Technology (HTR), where a major focus is on safety- and reliability-related issues. That implies special requirements for the support of high speed rotating shafts in HTR-Applications that only can be satisfied by using Active Magnetic Bearings (AMB). Regarding safety and competitiveness, AMBs are considered to be key components for the support of rotating HTR-components due to their technical features. AMBs are characterized by an electromagnetic actuator that is generating the bearing force depending on the clearance between stator and rotor, in which the rotor is levitated. Therefore an active control of the coil current is necessary. Furthermore, Touch Down Bearings (TDB) are needed to avoid damages in case of an emergency shut down or in case of energy supply losses. This contribution provides an internal insight on the advantages of a Hybrid Magnetic Bearing Concept that is characterized by a completely Active Magnetic Bearing-supported vertical arranged rotor and an additional permanent magnetic radial orientated bearing. One benefit of the HMBC is an additional radial guidance of the shaft that may reduce the loads while dropping into the Touch Down Bearings e.g. in case of energy supply losses of the AMBs. Reduced loads on the TDBs will increase their life cycle and the availability of the AMB supported component. The scope of this R and D-Project, which will be described more detailed in this contribution, includes: the analytical modeling and simulation of the dynamic behavior of the Hybrid Magnetic Bearing System; the modification of the completely AMB

  8. Hybrid functional study of structural, electronic and magnetic properties of S-doped ZnO with and without neutral vacancy

    Energy Technology Data Exchange (ETDEWEB)

    Debbichi, M., E-mail: mourad_fsm@yahoo.fr [Laboratoire de la matière condensée et nanosciences, Département de Physique, Faculté des Sciences de Monastir, 5019 Monastir (Tunisia); Sakhraoui, T. [Laboratoire de la matière condensée et nanosciences, Département de Physique, Faculté des Sciences de Monastir, 5019 Monastir (Tunisia); Debbichi, L. [Institut Carnot de Bourgogne, UMR 6303, Université de Bourgogne-CNRS, 21078 Dijon (France); Said, M. [Laboratoire de la matière condensée et nanosciences, Département de Physique, Faculté des Sciences de Monastir, 5019 Monastir (Tunisia)

    2013-11-25

    Highlights: •S-doped ZnO have been investigated by DFT and EPM. •Good agreement with the experimental data is obtained by HSE (α = 0.28) functional on lattice parameters and band gap energy. •Zn vacancy introduced in S doped ZnO is studied by HSE to determine its electronic and magnetic properties. -- Abstract: The structural and electronic properties of S-doped ZnO are investigated by density functional theory (DFT) and empirical pseudopotential method (EPM). Using the Heyd–Scuseria–Ernzerhof (HSE) hybrid functional with an adjusted mixing coefficient α, we obtain a good agreement on lattice parameters and band gap energy with the available experimental data. We have also investigate the Zn-vacancy effects on the electronic and magnetic properties of S-doped ZnO. Our calculations demonstrate that S impurity prefers to be close to the cation vacancy in the apical position. The magnetic analysis with the HSE functional shows a triplet state character with a total magnetic moment of 1.81 μ{sub B}, which is mainly arises from the p-orbitals of the atoms around the Zn-vacancy (15% from S, 12% from Zn and 73% from O-atoms). The substitution of S by an isovalent atom decreases the total magnetic moments of the system and weakens the local triplet state without destroying it.

  9. Induced superconductivity in Nb/InAs-hybrid structures in parallel and perpendicular magnetic fields; Induzierte Supraleitung in Nb/InAs-Hybridstrukturen in parallelen und senkrechten Magnetfeldern

    Energy Technology Data Exchange (ETDEWEB)

    Rohlfing, Franziska

    2007-07-15

    The thesis in hand investigates experimentally Josephson contacts based on Nb/InAs-hybrid structures. The experiments discussed here were done on samples of different width of the Josephson contacts (between 500 nm and 2000 nm). They were realized by means of different methods of the semiconductor technology. The length of the Josephson contacts was about 600 nm and, as superconducting material, niobium was used. Both critical current and characteristics in the resistive regime (excess-current and multiple Andreev reflection) are studied as a function of temperature and external magnetic fields. Measurements in perpendicular and parallel magnetic fields with respect to the plain of the two-dimensional electron gas, are presented. The Andreev reflection amplitude determining the supercurrent is calculated by means of the Greens functions of the two-dimensional electron gas beneath the superconductors which is modified by the proximity effect. From the fit to the data with this model, the transparency of the boundary between the superconductor and the two-dimensional electron gas can be estimated to be about 0.1. The transparency of the point contacts in the two-dimensional electrons gas can be determined independently from the Josephson junction width dependence of the normal resistance (T=10 K). This transparency amounts to about 0.8 in the examined samples. The measurements of the critical current in a magnetic field perpendicular to the two-dimensional electron gas show a Fraunhofer pattern. In order to study the transition from perpendicular orientation into parallel orientation, measurements of the critical current as a function of the magnetic field were done for different angles. In the resistive regime, the excess current measurements in the magnetic field show a very interesting behaviour: In parallel magnetic fields, the excess current becomes zero at about 2.5 T. In perpendicular magnetic field however, the excess current is strongly suppressed below 30 m

  10. Dynamic Behavior of Axially Functionally Graded Pipes Conveying Fluid

    Directory of Open Access Journals (Sweden)

    Chen An

    2017-01-01

    Full Text Available Dynamic behavior of axially functionally graded (FG pipes conveying fluid was investigated numerically by using the generalized integral transform technique (GITT. The transverse vibration equation was integral transformed into a coupled system of second-order differential equations in the temporal variable. The Mathematica’s built-in function, NDSolve, was employed to numerically solve the resulting transformed ODE system. Excellent convergence of the proposed eigenfunction expansions was demonstrated for calculating the transverse displacement at various points of axially FG pipes conveying fluid. The proposed approach was verified by comparing the obtained results with the available solutions reported in the literature. Moreover, parametric studies were performed to analyze the effects of Young’s modulus variation, material distribution, and flow velocity on the dynamic behavior of axially FG pipes conveying fluid.

  11. STABILITY ANALYSIS OF VISCOELASTIC CURVED PIPES CONVEYING FLUID

    Institute of Scientific and Technical Information of China (English)

    WANG Zhong-min; ZHANG Zhan-wu; ZHAO Feng-qun

    2005-01-01

    Based on the Hamilton's principle for elastic systems of changing mass, a differential equation of motion for viscoelastic curved pipes conveying fluid was derived using variational method, and the complex characteristic equation for the viscoelastic circular pipe conveying fluid was obtained by normalized power series method. The effects of dimensionless delay time on the variation relationship between dimensionless complex frequency of the clamped-clamped viscoelastic circular pipe conveying fluid with the Kelvin-Voigt model and dimensionless flow velocity were analyzed. For greater dimensionless delay time, the behavior of the viscoelastic pipe is that the first, second and third mode does not couple, while the pipe behaves divergent instability in the first and second order mode, then single-mode flutter takes place in the first order mode.

  12. First studies in the 45 T hybrid magnet at the NHMFL-Tallahassee: the high-field phases of organic and Kondo systems

    Science.gov (United States)

    Brooks, J. S.; Balicas, L.; Tokumoto, M.; Terashima, T.; Echizen, Y.; Takabatake, T.

    2001-01-01

    We have performed magnetoresistance measurements on an organic conductor, α-(BEDT-TTF) 2KHg(SCN) 4, and on a Kondo semiconductor, CeNiSn, at low temperatures and for fields up to 45 T in the hybrid magnet at the National High Magnetic Field Laboratory. We will discuss some new insight into a very controversial high-field phase of α-(BEDT-TTF) 2KHg(SCN) 4 gained from measurements of the anomalous temperature dependence of the quantum oscillations in the range 25-45 T. New information will also be presented on the temperature dependence of resistivity in the high-field state of CeNiSn, where questions of metallic versus semiconducting ground states arise. To acquaint researchers who anticipate using the facility in the near future, practical details concerning use of this new high-field resource are included.

  13. Design Features of a Planar Hybrid/Permanent Magnet Strong Focusing Undulator for Free Electron Laser (FEL) And Synchrotron Radiation (SR) Applications

    Energy Technology Data Exchange (ETDEWEB)

    Tatchyn, Roman; /SLAC

    2011-09-09

    Insertion devices for Angstrom-wavelength Free Electron Laser (FEL) amplifiers driven by multi-GeV electron beams generally require distributed focusing substantially stronger than their own natural focusing fields. Over the last several years a wide variety of focusing schemes and configurations have been proposed for undulators of this class, ranging from conventional current-driven quadrupoles external to the undulator magnets to permanent magnet (PM) lattices inserted into the insertion device gap. In this paper we present design studies of a flexible high-field hybrid/PM undulator with strong superimposed planar PM focusing proposed for a 1.5 Angstrom Linac Coherent Light Source (LCLS) driven by an electron beam with a 1 mm-mr normalized emittance. Attainable field parameters, tuning modes, and potential applications of the proposed structure are discussed.

  14. Improvement of the propulsion force for HTSC-permanent magnet hybrid magnetically levitated carrying system by using the pinned flux of HTSC

    Science.gov (United States)

    Ikeda, M.; Sasaki, R.; Ueno, T.; Ohashi, S.

    Magnetically levitated carrying system has been developed. In this system, pinning force of high temperature bulk superconductor (HTSC) is used for the levitation and guidance. The magnetic rail is set on the ground, and flux from the magnetic rail is pinned by HTSCs. To increase levitation force, repulsive force of the permanent magnet is used. For the propulsion system, electromagnets are installed on the surface of the magnetic rail. Improvement of the propulsion force is studied. In the previous system, only flux of the permanent magnet of the carrier is used for propulsion. To increase propulsion force, that of the HTSC of the carrier is also used. Using this excitation method, the propulsion force is improved even though total number of the excited coil is the same.

  15. Impact of sorption phenomena on multiphase conveying processes

    Science.gov (United States)

    Hatesuer, Florian; Groth, Tillmann; Reichwage, Mark; Mewes, Dieter; Luke, Andrea

    2011-08-01

    Twin-screw multiphase pumps are employed increasingly to convey multiphase mixtures of crude oil, accompanying fluids, associated gas and solid particles. They are positive displacement pumps and suitable for handling products containing liquid accompanied by large amounts of gas. Experimental investigations on the conveying characteristic, namely measuring the delivered volume flow as a function of the pressure difference, provide results for selected mixtures. By means of the on hand work, the influence of sorption phenomena occurring due to pressure variations alongside the conveying process on the conveying characteristics of twin-screw pumps delivering mixtures of oil and gases is measured. The employed gases are air and carbon dioxide, which differ strongly in solubility in oil. All experiments are conducted in a closed loop test facility, where oil and gas volume flows are mixed before the inlet and separated after the outlet of the multiphase pump. In order to simulate the influence of the suction side pressure drop in the reservoir on the conveying characteristic, packed beds are employed as oil-filed model. Sorption processes inside of the oil-field model and within the multiphase pump affect the conveying behaviour significantly. The two-phase flow in the inlet and outlet pipe is visualised by means of a capacitance tomography system. Results show that the oil fraction of the total delivered volume flow is decreased due to desorption at the pump inlet. The gas fraction at the pump outlet is further decreased due to absorption. Experimental results are compared to calculated solubilities of the on-hand gases in oil and to the theoretically derived gas volume flow fraction expected at the multiphase pump.

  16. CHAOTIC TRANSIENTS IN A CURVED FLUID CONVEYING TUBE

    Institute of Scientific and Technical Information of China (English)

    Ni Qiao; Wang Lin; Qian Qin

    2005-01-01

    The chaotic transients of a curved fluid conveying tube subjected to a nonlinear foundation are investigated. The assumption of the inextensibility of the tube is applied to derive the nonlinear differential equation of motion via the Newtonian approach, with the differential quadrature method used to discretize the curved tube model in the spatial domain. And the nonlinear dynamic motion equation is obtained. The numerical analysis shows that, the final steady states are sensitive to the initial system conditions in a large parameter region of the fluid speed. This phenomenon of chaotic transients is infrequent for fluid conveying tubes.

  17. Experimental Study on Vertical Dilute Phase Gas Conveying

    Institute of Scientific and Technical Information of China (English)

    景山; 王金福; 等

    2003-01-01

    An experimental study of vertical gas conveying Geldart-D powder as a dilute phase is performed in a pipe of length 22m and internal diameter 0.05m using a fluidized blow tank at gas velocity ranging from 5m ·s-1 to 13m·s-1 and loading ratio up to about 30.The characteristics of gas conveying,such as pressure drop,the choking velocity and the minimum primary velocity of the fluidized blow tank,are discussed in detail.

  18. Orbital hybridization and magnetic coupling of the A-site Cu spins in CaCu3B4O12 (B = Ti, Ge, and Sn) perovskites.

    Science.gov (United States)

    Mizumaki, M; Saito, T; Shiraki, H; Shimakawa, Y

    2009-04-20

    X-ray absorption spectroscopy (XAS) spectra near the O K-edge of A-site-ordered perovskite with A-site Cu(2+) (S = (1)/(2)) spins were measured. The spectra of ferromagnetic CaCu(3)Ge(4)O(12) and CaCu(3)Sn(4)O(12) showed hybridization between Cu 3d and O 2p orbitals, but magnetic circular dichroism measurement revealed that the O 2p orbital played a less important role in magnetic interaction. The XAS spectra of antiferromagnetic CaCu(3)Ti(4)O(12), on the other hand, showed strong hybridization of the Cu 3d, Ti 3d, and O 2p orbitals. These results demonstrated that direct exchange interaction of the Cu(2+) spins primarily determined the ferromagnetic ordering of CaCu(3)Ge(4)O(12) and CaCu(3)Sn(4)O(12), whereas the involvement of Ti 3d orbitals induced the antiferromagnetic property in CaCu(3)Ti(4)O(12).

  19. Magnetic hybride layers. Magnetic properties of locally exchange-coupled NiFe/IrMn layers; Magnetische Hybridschichten. Magnetische Eigenschaften lokal austauschgekoppelter NiFe/IrMn-Schichten

    Energy Technology Data Exchange (ETDEWEB)

    Hamann, Christine

    2010-10-06

    By the lateral modification of the magnetic properties of exchange-coupled NiFe/IrMn layers soft-magnetic layers were produced, which show both new static and dynamic properties. As lateral structuration methods hereby the localoxidation as well as ion implantation were applied. By means of thes procedures it has been succeeded to mould specific magnetic domain configurations with strp structure into the layers. In dependence of the structure orientation as well as strip period the remagnetization behavior as well as the magnetic-resonance frequency and damping of the layers could directly be modified. The new dynamical properties are hereby discussed in the framework of the coupling via dynamical charges and the direct affection of the effective field of the artificially inserted domain state. The presented results prove by this the large potential of the lateral magneto-structuration for the tuning of specifical static as well as dynamic properties of magnetically thin layers.

  20. Strain-induced macroscopic magnetic anisotropy from smectic liquid-crystalline elastomer-maghemite nanoparticle hybrid nanocomposites.

    Science.gov (United States)

    Haberl, Johannes M; Sánchez-Ferrer, Antoni; Mihut, Adriana M; Dietsch, Hervé; Hirt, Ann M; Mezzenga, Raffaele

    2013-06-21

    We combine tensile strength analysis and X-ray scattering experiments to establish a detailed understanding of the microstructural coupling between liquid-crystalline elastomer (LCE) networks and embedded magnetic core-shell ellipsoidal nanoparticles (NPs). We study the structural and magnetic re-organization at different deformations and NP loadings, and the associated shape and magnetic memory features. In the quantitative analysis of a stretching process, the effect of the incorporated NPs on the smectic LCE is found to be prominent during the reorientation of the smectic domains and the softening of the nanocomposite. Under deformation, the soft response of the nanocomposite material allows the organization of the nanoparticles to yield a permanent macroscopically anisotropic magnetic material. Independent of the particle loading, the shape-memory properties and the smectic phase of the LCEs are preserved. Detailed studies on the magnetic properties demonstrate that the collective ensemble of individual particles is responsible for the macroscopic magnetic features of the nanocomposite.

  1. Well-Combined Magnetically Separable Hybrid Cobalt Ferrite/Nitrogen-Doped Graphene as Efficient Catalyst with Superior Performance for Oxygen Reduction Reaction.

    Science.gov (United States)

    Lu, Lei; Hao, Qingli; Lei, Wu; Xia, Xifeng; Liu, Peng; Sun, Dongping; Wang, Xin; Yang, Xujie

    2015-11-18

    Catalysts with low-cost, high activity and stability toward oxygen reduction reaction (ORR) are extremely desirable, but its development still remains a great challenge. Here, a novel magnetically separable hybrid of multimetal oxide, cobalt ferrite (CoFe2O4), anchored on nitrogen-doped reduced graphene oxide (CoFe2O4/NG) is prepared via a facile solvothermal method followed by calcination at 500 °C. The structure of CoFe2O4/NG and the interaction of both components are analyzed by several techniques. The possible formation of Co/Fe-N interaction in the CoFe2O4/NG catalyst is found. As a result, the well-combination of CoFe2O4 nanoparticles with NG and its improved crystallinity lead to a synergistic and efficient catalyst with high performance to ORR through a four-electron-transfer process in alkaline medium. The CoFe2O4/NG exhibits particularly comparable catalytic activity as commercial Pt/C catalyst, and superior stability against methanol oxidation and CO poisoning. Meanwhile, it has been proved that both nitrogen doping and the spinel structure of CoFe2O4 can have a significant contribution to the catalytic activity by contrast experiments. Multimetal oxide hybrid demonstrates better catalysis to ORR than a single metal oxide hybrid. All results make the low-cost and magnetically separable CoFe2O4/NG a promising alternative for costly platinum-based ORR catalyst in fuel cells and metal-air batteries. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. CoFe2O4@MIL-100(Fe) hybrid magnetic nanoparticles exhibit fast and selective adsorption of arsenic with high adsorption capacity

    Science.gov (United States)

    Yang, Ji-Chun; Yin, Xue-Bo

    2017-01-01

    In this study, we report the synthesis and application of mesoporous CoFe2O4@MIL-100(Fe) hybrid magnetic nanoparticles (MNPs) for the simultaneous removal of inorganic arsenic (iAs). The hybrid adsorbent had a core-shell and mesoporous structure with an average diameter of 260 nm. The nanoscale size and mesoporous character impart a fast adsorption rate and high adsorption capacity for iAs. In total, 0.1 mg L−1 As(V) and As(III) could be adsorbed within 2 min, and the maximum adsorption capacities were 114.8 mg g−1 for As(V) and 143.6 mg g−1 for As(III), higher than most previously reported adsorbents. The anti-interference capacity for iAs adsorption was improved by the electrostatic repulsion and size exclusion effects of the MIL-100(Fe) shell, which also decreased the zero-charge point of the hybrid absorbent for a broad pH adsorption range. The adsorption mechanisms of iAs on the MNPs are proposed. An Fe-O-As structure was formed on CoFe2O4@MIL-100(Fe) through hydroxyl substitution with the deprotonated iAs species. Monolayer adsorption of As(V) was observed, while hydrogen bonding led to the multi-layer adsorption of neutral As(III) for its high adsorption capacity. The high efficiency and the excellent pH- and interference-tolerance capacities of CoFe2O4@MIL-100(Fe) allowed effective iAs removal from natural water samples, as validated with batch magnetic separation mode and a portable filtration strategy. PMID:28102334

  3. CoFe2O4@MIL-100(Fe) hybrid magnetic nanoparticles exhibit fast and selective adsorption of arsenic with high adsorption capacity

    Science.gov (United States)

    Yang, Ji-Chun; Yin, Xue-Bo

    2017-01-01

    In this study, we report the synthesis and application of mesoporous CoFe2O4@MIL-100(Fe) hybrid magnetic nanoparticles (MNPs) for the simultaneous removal of inorganic arsenic (iAs). The hybrid adsorbent had a core-shell and mesoporous structure with an average diameter of 260 nm. The nanoscale size and mesoporous character impart a fast adsorption rate and high adsorption capacity for iAs. In total, 0.1 mg L‑1 As(V) and As(III) could be adsorbed within 2 min, and the maximum adsorption capacities were 114.8 mg g‑1 for As(V) and 143.6 mg g‑1 for As(III), higher than most previously reported adsorbents. The anti-interference capacity for iAs adsorption was improved by the electrostatic repulsion and size exclusion effects of the MIL-100(Fe) shell, which also decreased the zero-charge point of the hybrid absorbent for a broad pH adsorption range. The adsorption mechanisms of iAs on the MNPs are proposed. An Fe-O-As structure was formed on CoFe2O4@MIL-100(Fe) through hydroxyl substitution with the deprotonated iAs species. Monolayer adsorption of As(V) was observed, while hydrogen bonding led to the multi-layer adsorption of neutral As(III) for its high adsorption capacity. The high efficiency and the excellent pH- and interference-tolerance capacities of CoFe2O4@MIL-100(Fe) allowed effective iAs removal from natural water samples, as validated with batch magnetic separation mode and a portable filtration strategy.

  4. An Instructional Method Suggestion: Conveying Stories through Origami (Storigami)

    Science.gov (United States)

    Oguz, Aysegul

    2016-01-01

    The purpose of this study was to elucidate how to convey stories through origami and suggest its use in education with the help of pre-service elementary teachers' opinions. The participants of the study were 103 elementary teacher candidates from a state university in the 2014-2015 academic year. In this qualitative study, the data were collected…

  5. 38 CFR 36.4323 - Election to convey security.

    Science.gov (United States)

    2010-07-01

    ... security. 36.4323 Section 36.4323 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS... Election to convey security. (a) If the holder acquires the property that secured the guaranteed loan at... holder. (11) In respect to a property which was the security for a condominium loan guaranteed or...

  6. Persuasive Structures in Advergames. Conveying Advertising Messages through Digital Games

    NARCIS (Netherlands)

    de la Hera Conde-Pumpido, T.

    2014-01-01

    The evolution of the game industry and changes in the advertising landscape in recent years have led to a keen interest of marketers in using digital games for advertising purposes. Digital games specifically designed for a brand with the aim of conveying an advertising message, are known as adverga

  7. Persuasive Structures in Advergames. Conveying Advertising Messages through Digital Games

    NARCIS (Netherlands)

    de la Hera Conde-Pumpido, T.

    2014-01-01

    The evolution of the game industry and changes in the advertising landscape in recent years have led to a keen interest of marketers in using digital games for advertising purposes. Digital games specifically designed for a brand with the aim of conveying an advertising message, are known as

  8. Persuasive Structures in Advergames. Conveying Advertising Messages through Digital Games

    NARCIS (Netherlands)

    de la Hera Conde-Pumpido, T.|info:eu-repo/dai/nl/331869063

    2014-01-01

    The evolution of the game industry and changes in the advertising landscape in recent years have led to a keen interest of marketers in using digital games for advertising purposes. Digital games specifically designed for a brand with the aim of conveying an advertising message, are known as adverga

  9. Attractors of hybrid magnetic levitation ball system and stability research%混合磁悬浮球系统吸引子及稳定性研究

    Institute of Scientific and Technical Information of China (English)

    马凤莲; 江东; 张翔; 杨嘉祥

    2012-01-01

    为了避免磁悬浮球混沌运动,设计了永磁和电磁混合型磁悬浮球模型,推导了磁悬浮球的动力学方程,并建立了磁悬浮球系统的仿真模型.通过改变初始状态,得到不同初始条件下的磁悬浮球系统吸引子.混合型磁悬浮球系统具有单、双两类吸引子,双吸引子表现出较强的混沌特性,磁悬浮球围绕平衡点附近的波动较大,磁悬浮球由混沌运动状态向非混沌运动状态转变时,由双吸引子逐渐向单吸引子过渡,系统演变为具有周期特性的运动状态,再演变为相轨迹收敛于一个点,磁悬浮球处于较稳定的运动状态.仿真和实验结果表明,通过磁悬浮球吸引子的研究可了解混沌产生的初始区间,进而为设计中避开混沌区实现磁悬浮球的稳定运动提供了参考依据.%In order to avoid magnetic levitation ball in the chaotic region, the model of permanent magnet and electromagnet hybrid magnetic levitation ball system was designed,the dynamic equation of magnetic levitation ball was deduced, and the magnetic levitation system simulation mode] was set up. The different attractors were obtained by changing the initial states. The simulation results show that the hybrid magnetic levitation ball system designed has single and double two types of attractors. The double attractors have stronger chaotic performance and the magnetic levitation ball has greater fluctuation around the equilibrium point. The attractor is gradually from double attractors to single attractor in magnetic levitation ball from chaotic station transition to non-chaotic state, the magnetic levitation ball becomes a cyclical nature of the motion state and it gradually evolves to a point of phase trajectories when the system presents a stable state. Simulation and test show that the chaos generated by the initial region can be understood by studying the magnetic levitation ball attractors, which provides a reference design basis to a

  10. Magnetic Implants Aid Hearing

    Institute of Scientific and Technical Information of China (English)

    陈宏

    1995-01-01

    The next generation of hearing aids may use tiny magnets that fit inside the ear. Researchersat a California company and an engineer at the University of Virginia are both developing systems that rely on magnets to convey sounds. Conventional hearing aids have three components:a microphone, an amplifier, and a speaker. The microphone picks up sounds and sends them to the am-

  11. 计及边缘效应的交流混合磁轴承建模%Modeling for AC Hybrid Magnetic Bearings Considering Edge Effect

    Institute of Scientific and Technical Information of China (English)

    朱熀秋; 丁书玲

    2016-01-01

    在混合磁轴承(hybrid magnetic bearing,HMB)建模过程中,通常忽略涡流效应、边缘效应和漏磁等因素,使得悬浮力数学模型精度降低。为了提高模型精度,提出了计及磁极端部边缘效应的混合磁轴承改进模型。该文以交流径向混合磁轴承为例分析其工作原理和磁通分布特性,采用磁场分割法分别求解不同边缘磁通区域的磁导,通过叠加原则获得单个磁极下的总磁导,根据等效磁路法建立径向悬浮力的精确数学模型。实验结果表明:改进前模型计算所得悬浮力与实验所得悬浮力误差接近10%,改进后的数学模型所得悬浮力与实验所得悬浮力误差小于5%。比较结果证明了计及边缘效应能有效提高悬浮力数学模型的精度。%In modeling proceeding of hybrid magnetic bearings (HMBs), factors such as the eddy current effect, the edge effect and the flux leakage are commonly ignored, which decreases the precision of the mathematical model of suspension forces. In order to improve the precision, an improved mathematical model of hybrid magnetic bearings considering the edge effect was established. An AC hybrid magnetic bearing was taken as an example, its working principle and features of flux distribution were analyzed. Then, the magnetic field division method was employed to calculate the permeances of different regions located around the end portion of the pole. The permeances were added by the superposition principle, and the total permeance of the single pole was obtained. The accurate model was obtained by using the equivalent magnetic circuit method. The experimental results show that the error between original model values and experimental values is about 10%, the error between improved model values and experimental values is less than 5%. The results of the comparison have verified that the consideration of the edge effect can effectively improve the precision of the mathematical model

  12. MAGNET

    CERN Multimedia

    by B. Curé

    2011-01-01

    The magnet operation was very satisfactory till the technical stop at the end of the year 2010. The field was ramped down on 5th December 2010, following the successful regeneration test of the turbine filters at full field on 3rd December 2010. This will limit in the future the quantity of magnet cycles, as it is no longer necessary to ramp down the magnet for this type of intervention. This is made possible by the use of the spare liquid Helium volume to cool the magnet while turbines 1 and 2 are stopped, leaving only the third turbine in operation. This obviously requires full availability of the operators to supervise the operation, as it is not automated. The cryogenics was stopped on 6th December 2010 and the magnet was left without cooling until 18th January 2011, when the cryoplant operation resumed. The magnet temperature reached 93 K. The maintenance of the vacuum pumping was done immediately after the magnet stop, when the magnet was still at very low temperature. Only the vacuum pumping of the ma...

  13. Magnetic solid phase extraction of gemfibrozil from human serum and pharmaceutical wastewater samples utilizing a β-cyclodextrin grafted graphene oxide-magnetite nano-hybrid.

    Science.gov (United States)

    Abdolmohammad-Zadeh, Hossein; Talleb, Zeynab

    2015-03-01

    A magnetic solid phase extraction method based on β-cyclodextrin (β-CD) grafted graphene oxide (GO)/magnetite (Fe3O4) nano-hybrid as an innovative adsorbent was developed for the separation and pre-concentration of gemfibrozil prior to its determination by spectrofluorometry. The as-prepared β-CD/GO/Fe3O4 nano-hybrid possesses the magnetism property of Fe3O4 nano-particles that makes it easily manipulated by an external magnetic field. On the other hand, the surface modification of GO by β-CD leads to selective separation of the target analyte from sample matrices. The structure and morphology of the synthesized adsorbent were characterized using powder X-ray diffraction, Fourier transform infrared spectroscopy, and field emission scanning electron microscopy. The experimental factors affecting the extraction/pre-concentration and determination of the analyte were investigated and optimized. Under the optimized experimental conditions, the calibration graph was linear in the range between 10 and 5000 pg mL(-1) with a correlation coefficient of 0.9989. The limit of detection and enrichment factor for gemfibrozil were 3 pg mL(-1) and 100, respectively. The maximum sorption capacity of the adsorbent for gemfibrozil was 49.8 mg g(-1). The method was successfully applied to monitoring gemfibrozil in human serum and pharmaceutical wastewaters samples with recoveries in the range of 96.0-104.0% for the spiked samples. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. Equivalent Magnetic Circuit Model of Flux-switching Hybrid Excitation Machine%混合励磁磁通切换电机等效磁路模型

    Institute of Scientific and Technical Information of China (English)

    许泽刚; 谢少军; 毛鹏

    2011-01-01

    混合励磁磁通切换电机(flux-switching hybrid excitationmachine,FSHM)是一种新型定子励磁型交流无刷电机,具有磁链双极性、结构简单、功率密度高、运行可靠等优点。改变电励磁绕组电流的大小和方向,实现了对永磁气隙磁场的有效调节与控制,而引入导磁磁桥可提升气隙磁场调节范围。以建立电枢绕组磁链最大位置的等效磁路模型为切入点,推导了峰值磁通表达式,探索了磁桥段相对磁导率的估算方法,结合有限元仿真分析了磁桥厚度变化与磁桥式FSHM初始气隙磁密、磁桥磁密、气隙磁场调节能力、磁力线路径转移等特性的关系。样机的有限元仿真及实验结果与等效磁路模型预测趋势基本一致,验证了建模方法与理论分析的正确性,可用于指导磁通切换电机的设计与性能分析。%Flux-switching hybrid excitation machine(FSHM) was an interesting brushless machine with magnets in the stator,which offered the advantages of bipolar flux linkage,simple and robust rotor structure and high power density.Adjustment and control of the PM air gap magnetic field could be achieved by means of controlling the field winding current,and magnetic bridge amplified the effect of field flux on PM flux.This paper took equivalent magnetic circuit model(EMCM) of maximum phase flux-linkage position as point of penetration,deduced the equation of peak magnetic flux,and explored a method for estimating the relative permeability of magnetic bridge.The characteristic relation between the thickness of magnetic bridge and initial air gap flux density,magnetic bridge flux density,regulating capacity of air gap magnetic field,and magnetic lines transfer were studied combined with finite element analysis(FEA).The estimation results based on EMCM agreed well with the FEA and experiment data,which confirmed the correctness of modeling method and theoretical analysis.It provided reference for

  15. Magnon, phonon, and electron temperature profiles and the spin Seebeck effect in magnetic insulator/normal metal hybrid structures

    NARCIS (Netherlands)

    Schreier, M.; Kamra, A.; Weiler, M.; Xiao, J.; Bauer, G.E.W.; Gross, R.; Goennenwein, S.T.B.

    2013-01-01

    We calculate the phonon, electron, and magnon temperature profiles in yttrium iron garnet/platinum bilayers by diffusive theory with appropriate boundary conditions, in particular taking into account interfacial thermal resistances. Our calculations show that in thin film hybrids, the interface magn

  16. Hybrid plasmonic magnetic nanoparticles as molecular specific agents for MRI/optical imaging and photothermal therapy of cancer cells

    Energy Technology Data Exchange (ETDEWEB)

    Larson, Timothy A [Department of Biomedical Engineering, University of Texas at Austin, Austin, TX 78712 (United States); Bankson, James [Department of Imaging Physics, University of Texas MD Anderson Cancer Center, Houston, TX 77030 (United States); Aaron, Jesse [Department of Biomedical Engineering, University of Texas at Austin, Austin, TX 78712 (United States); Sokolov, Konstantin [Department of Biomedical Engineering, University of Texas at Austin, Austin, TX 78712 (United States)

    2007-08-15

    Nanoparticles which consist of a plasmonic layer and an iron oxide moiety could provide a promising platform for development of multimodal imaging and therapy approaches in future medicine. However, the feasibility of this platform has yet to be fully explored. In this study we demonstrated the use of gold-coated iron oxide hybrid nanoparticles for combined molecular specific MRI/optical imaging and photothermal therapy of cancer cells. The gold layer exhibits a surface plasmon resonance that provides optical contrast due to light scattering in the visible region and also presents a convenient surface for conjugating targeting moieties, while the iron oxide cores give strong T{sub 2} (spin-spin relaxation time) contrast. The strong optical absorption of the plasmonic gold layer also makes these nanoparticles a promising agent for photothermal therapy. We synthesized hybrid nanoparticles which specifically target epidermal growth factor receptor (EGFR), a common biomarker for many epithelial cancers. We demonstrated molecular specific MRI and optical imaging in MDA-MB-468 breast cancer cells. Furthermore, we showed that receptor-mediated aggregation of anti-EGFR hybrid nanoparticles allows selective destruction of highly proliferative cancer cells using a nanosecond pulsed laser at 700 nm wavelength, a significant shift from the peak absorbance of isolated hybrid nanoparticles at 532 nm.

  17. 交流混合型磁轴承磁场及悬浮力特性分析%Magnetic Field and Characteristic Analysis of Suspension Forces for Radial AC Hybrid Magnetic Bearing

    Institute of Scientific and Technical Information of China (English)

    张松; 张维煜; 朱熀秋

    2012-01-01

    对交流混合型磁轴承的组成结构和基本工作原理进行了介绍,并针对该交流混合型磁轴承的悬浮力进行了数学模型的建立,而且通过泰勒公式近似获得其线性模型.文中创建了该磁轴承的实体模型,利用Ansoft 软件仿真并分析了该交流磁轴承的磁通分布状况(气隙及磁极内部);采用Ansoft分析软件与MATLAB软件对交流磁轴承悬浮力的非线性变化规律进行了计算分析.仿真结果表明:磁通密度的分布在磁轴承中,其仿真值和理论设计值几乎吻合,说明该磁轴承计算设计的参数有效;基于数学模型和有限元实体模型的交流混合型磁轴承特性分析结果一致,表明该磁轴承的数学模型建立正确,逼近磁轴承实际工作情况下的模型.%Configuration and operation principle of the radial AC hybrid magnetic bearing ( AC HMB) were introduced , the mathematical models of suspension forces were deduced with the method of equivalent magnetic circuits, and the linearity models about the equilibrium position were obtained by using their Taylor expansions. Based on the establishment of finite element solid models of the magnetic bearing in Ansoft finite element analysis software, the magnetic field distributions in air gap and magnetic pole of the AC HMB were calculated. The nonlinear variation of suspension forces of the magnetic bearing was calculated with Ansoft finite element and MATLAB software respectively. The simulation results show that the magnetic field distribution in magnetic bearing is consistent with the theoretical design, and the designing of structural parameters is reasonable. Results also show that the characteristic analysis results based on the mathematical models and finite element solid models of the AC HMB are consistent, and the mathematical model is proved correct, which is close to the model of the magnetic bearing under actual conditions.

  18. Magnetic and optical properties of Ag@SiO{sub 2}-FITC-Fe{sub 3}O{sub 4} hybrid nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Sui, Ning [Université de Lyon, Institut des Nanotechnologies de Lyon–INL, UMR CNRS 5270, Site Ecole Centrale de Lyon, 36 Avenue Guy de Collongue, F-69134 Ecully Cedex (France); College of Material Science and Engineering, Qingdao University of Science and Technology, Qingdao 266042 (China); Monnier, Virginie, E-mail: virginie.monnier@ec-lyon.fr [Université de Lyon, Institut des Nanotechnologies de Lyon–INL, UMR CNRS 5270, Site Ecole Centrale de Lyon, 36 Avenue Guy de Collongue, F-69134 Ecully Cedex (France); Salvia, Marie-Virginie; Chevolot, Yann; Souteyrand, Eliane [Université de Lyon, Institut des Nanotechnologies de Lyon–INL, UMR CNRS 5270, Site Ecole Centrale de Lyon, 36 Avenue Guy de Collongue, F-69134 Ecully Cedex (France)

    2014-03-15

    Highlights: • New magnetic/fluorescent nanoparticles were synthesized. • The silver core led to a maximum 4-fold enhanced fluorescence of fluorophore. • Maximum enhancement factor was obtained when metal-fluorophore distance is 5 nm. • Magnetism and fluorescence appeared simultaneously for nanoparticles in solution. -- Abstract: Nanoparticles composed of a silver core coated with a silica shell (Ag@SiO{sub 2}) were prepared. A dye, fluorescein isothiocyanate (FITC), was further encapsulated during the growth of a second silica shell onto Ag@SiO{sub 2} nanoparticles. The proximity of silver nanoparticles led to a 4-fold maximal enhancement in the fluorescence of FITC when the first silica shell thickness was set at 5 nm. After amino-functionalization of Ag@SiO{sub 2}-FITC nanoparticles, iron oxide nanoparticles were bonded to their surface. The magnetic and metal-enhanced fluorescence properties appeared simultaneously when Ag@SiO{sub 2}-FITC-Fe{sub 3}O{sub 4} hybrid nanoparticles were dispersed in a solution.

  19. Modeling and Analysis of Coupling Performance of Dynamic Stiffness Models for a Novel Combined Radial-Axial Hybrid Magnetic Bearing

    Directory of Open Access Journals (Sweden)

    Bangcheng Han

    2014-01-01

    Full Text Available The combined radial-axial magnetic bearing (CRAMB with permanent magnet creating bias flux can reduce the size, cost, and mass and save energy of the magnetic bearing. The CRAMB have three-degree-of-freedom control ability, so its structure and magnetic circuits are more complicated compared to those of the axial magnetic bearing (AMB or radial magnetic bearing (RMB. And the eddy currents have a fundamental impact on the dynamic performance of the CRAMB. The dynamic stiffness model and its cross coupling problems between different degrees of freedom affected for the CRAMB are proposed in this paper. The dynamic current stiffness and the dynamic displacement stiffness models of the CRAMB are deduced by using the method of equivalent magnetic circuit including eddy current effect, but the dynamic current stiffness of the RMB unit is approximately equal to its static current stiffness. The analytical results of an example show that the bandwidth of the dynamic current stiffness of the AMB unit and the dynamic displacement stiffness of the CRAMB is affected by the time-varying control currents or air gap, respectively. And the dynamic current stiffness and the dynamic displacement stiffness between the AMB unit and the RMB unit are decoupled due to few coupling coefficients.

  20. Constructing magnetic polyaniline/metal hybrid nanostructures using polyaniline/Fe 3O 4 composite hollow spheres as supports

    Science.gov (United States)

    Kong, Lirong; Lu, Xiaofeng; Jin, E.; Jiang, Shan; Bian, Xiujie; Zhang, Wanjin; Wang, Ce

    2009-08-01

    Polyaniline (PANI)/Fe 3O 4 composite hollow spheres have been successfully synthesized in one step using sulfonated polystyrene (PS) spheres as templates. The magnetic PANI hollow spheres were used as supports for noble metal nanoparticles (NPs) such as Au and Pd. The morphology, composition and magnetic properties of the resulting products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, inductively coupled plasma (ICP) atomic spectra and vibrating sample magnetometer. The catalytic activity of magnetic PANI/Au composite shells on the oxidation of dopamine was investigated by cyclic voltammetry. The obtained results provide our product with a practical application for the detection of dopamine. On the other hand, the catalytic activity of magnetic PANI/Pd composite shells on the reduction of 4-nitroaniline was investigated by spectroscopic methods and compared with Pd/C catalyst which was already widely used in industrial production.

  1. MAGNET

    CERN Multimedia

    B. Curé

    2012-01-01

      The magnet was energised at the beginning of March 2012 at a low current to check all the MSS safety chains. Then the magnet was ramped up to 3.8 T on 6 March 2012. Unfortunately two days later an unintentional switch OFF of the power converter caused a slow dump. This was due to a misunderstanding of the CCC (CERN Control Centre) concerning the procedure to apply for the CMS converter control according to the beam-mode status at that time. Following this event, the third one since 2009, a discussion was initiated to define possible improvement, not only on software and procedures in the CCC, but also to evaluate the possibility to upgrade the CMS hardware to prevent such discharge from occurring because of incorrect procedure implementations. The magnet operation itself was smooth, and no power cuts took place. As a result, the number of magnetic cycles was reduced to the minimum, with only two full magnetic cycles from 0 T to 3.8 T. Nevertheless the magnet suffered four stops of the cryogeni...

  2. MAGNET

    CERN Multimedia

    Benoit Curé

    2010-01-01

    Operation of the magnet has gone quite smoothly during the first half of this year. The magnet has been at 4.5K for the full period since January. There was an unplanned short stop due to the CERN-wide power outage on May 28th, which caused a slow dump of the magnet. Since this occurred just before a planned technical stop of the LHC, during which access in the experimental cavern was authorized, it was decided to leave the magnet OFF until 2nd June, when magnet was ramped up again to 3.8T. The magnet system experienced a fault also resulting in a slow dump on April 14th. This was triggered by a thermostat on a filter choke in the 20kA DC power converter. The threshold of this thermostat is 65°C. However, no variation in the water-cooling flow rate or temperature was observed. Vibration may have been the root cause of the fault. All the thermostats have been checked, together with the cables, connectors and the read out card. The tightening of the inductance fixations has also been checked. More tem...

  3. MAGNET

    CERN Multimedia

    B. Curé

    2012-01-01

      Following the unexpected magnet stops last August due to sequences of unfortunate events on the services and cryogenics [see CMS internal report], a few more events and initiatives again disrupted the magnet operation. All the magnet parameters stayed at their nominal values during this period without any fault or alarm on the magnet control and safety systems. The magnet was stopped for the September technical stop to allow interventions in the experimental cavern on the detector services. On 1 October, to prepare the transfer of the liquid nitrogen tank on its new location, several control cables had to be removed. One cable was cut mistakenly, causing a digital input card to switch off, resulting in a cold-box (CB) stop. This tank is used for the pre-cooling of the magnet from room temperature down to 80 K, and for this reason it is controlled through the cryogenics control system. Since the connection of the CB was only allowed for a field below 2 T to avoid the risk of triggering a fast d...

  4. Magnetic characterisation of large grain, bulk Y–Ba–Cu–O superconductor–soft ferromagnetic alloy hybrid structures

    OpenAIRE

    Philippe, Matthieu; Fagnard, Jean-François; Kirsch, Sébastien; Xu, Zhihan; Dennis, Anthony; Shi, Yunhua; Cardwell, David A.; Vanderheyden, Benoît; Vanderbemden, Philippe

    2014-01-01

    Large grain, bulk Y–Ba–Cu–O (YBCO) high temperature superconductors (HTS) have significant potential for use in a variety of practical applications that incorporate powerful quasi-permanent magnets. In the present work, we investigate how the trapped field of such magnets can be improved by combining bulk YBCO with a soft FeNi, ferromagnetic alloy. This involves machining the alloy into components of various shapes, such as cylinders and rings, which are attached subsequently to the top surfa...

  5. Book reviews: About the art of conveying art!

    Directory of Open Access Journals (Sweden)

    Thurid Vold

    2015-10-01

    Full Text Available Three books about the art of convey art are reviewed: Formidling av kunst til barn og unge (Dissemination of art to children and young people by Arne Marius Samuelsen, Dialogbasert Undervisning. Kunstmuseet som læringsrom (Dialog Based Teaching. The Art museum as learning space by Olga Dysthe, Nana Bernhardt and Line Enskjønn, and Kunsten å formidle (The Art to convey by Alfred Oftedal Telhaug. The reviewer writes that all three books are great contributions to the literature on art mediation and are indispensable for all who teach children and youth in schools and museums. The books should have a prominent place on the bibliography for teacher students in Art and Crafts, Primary and Secondary Teacher Education and Early Childhood Education and for museum educators.

  6. Hybridization between microstructure and magnetization improvement in lead and RE co-doped BiFeO3

    Institute of Scientific and Technical Information of China (English)

    MA Ahmed; SF Mansour; SI El-Dek; MM Karamany

    2016-01-01

    The crystal structure, magnetic and electrical properties of Bi0.96Pb0.04FeO3 and Bi0.92Pb0.04RE0.04FeO3 (RE=La, Sm, Dy and Yb) polycrystalline samples were prepared by the flash autocombustion technique. X-ray diffraction (XRD) measurements show that the rare-earth doped compositions crystallized in rhombohedral symmetry of space groupR3c. The undoped sample consisted needle shape particles while rare earth substitution preferred platelet like particles as clarified from high resolution transmission elec-tron microscopy (HRTEM). Morphological features were examined using field emission scanning electron microscopy (FESEM). Magnetization measurements showed that Yb3+ samples possessed the highest room temperature saturation magnetization while when Bi3+ ions were substituted by La3+ ions, a smallerMS (0.28 emu/g) was obtained. The coexistence of ferroelectric and magnetic transi-tions was detected using DSC andχM, indicating the multiferroic characteristics of Bi0.92Pb0.04RE0.04FeO3 crystallites. The Néel tem-perature shifted upwards with decreasing the ionic radius of rare earth ion. Nice correlation was established between microstructure, morphology and magnetic properties in view of the contribution of magnetocrystalline and shape anisotropy in the magnetic parame-ters values.

  7. Concept of a Hybrid (Normal and Superconducting) Bending Magnet based on Iron Magnetization for 80-100km Lepton/Hadron Colliders

    CERN Document Server

    Milanese, A; Piekarz, H

    2014-01-01

    We present a concept of twin aperture iron dominated bending magnets. These compact “transmission line” dipoles are meant to be installed in the same 80-100 km tunnel of the Future Circular Colliders (FCC) currently being studied at CERN, where they shall be used for the high energy injector synchrotrons. The main feature is the coupling of a resistive cable (for first use in a leptons machine) with a superconducting one (for hadrons operation, presumably in a second phase of FCC). The main challenges in terms of operating field range are commented in the light of similar magnets already built.

  8. Dynamics of fluid-conveying pipes: effects of velocity profiles

    DEFF Research Database (Denmark)

    Enz, Stephanie; Thomsen, Jon Juel

    Varying velocity profiles and internal fluid loads on fluid-conveying pipes are investigated. Different geometric layouts of the fluid domain and inflow velocity profiles are considered. It is found that the variation of the velocity profiles along the bended pipe is considerable. A determination...... of the resulting fluid loads on the pipe walls is of interest e.g, for evaluating the dynamical behaviour of lightly damped structures like Coriolis flow meters....

  9. The use of haiku to convey complex concepts in neuroscience.

    Science.gov (United States)

    Pollack, Alexia E; Korol, Donna L

    2013-01-01

    Conveying scientific content with accuracy and fluency takes practice and requires deep understanding of the concepts being conveyed. This depth of knowledge comes from internalizing information and constructing it into a form that is unique and coherent to the individual. Often in science classrooms there is little or no opportunity for students to practice this type of thinking, activities that we believe are fundamental to effective science communication. This article describes the use of haiku - a 17 syllable poem - as a means for students to convey neurobiological concepts in a succinct manner by forcing them to focus on the most salient features of the observed processes. In our assignments haiku writing was successfully paired with explanations of the students' thought processes (Addiction course) or the scientific evidence to support claims (Neurodegenerative Disease course). We provide examples of student haiku and explanations as evidence of the power of this approach. The coupling of poetry and prose together create rich, accurate descriptions of scientific phenomena by encouraging higher-order thinking. Poetry writing can thus be used across the curriculum to forge comprehension of complex ideas in any discipline and to bridge the arts and the sciences.

  10. The Shortening of MWNT-SPION Hybrids by Steam Treatment Improves Their Magnetic Resonance Imaging Properties In Vitro and In Vivo.

    Science.gov (United States)

    Cabana, Laura; Bourgognon, Maxime; Wang, Julie T-W; Protti, Andrea; Klippstein, Rebecca; de Rosales, Rafael T M; Shah, Ajay M; Fontcuberta, Josep; Tobías-Rossell, Ester; Sosabowski, Jane K; Al-Jamal, Khuloud T; Tobias, Gerard

    2016-06-01

    Carbon nanotubes (CNTs) have been advocated as promising nanocarriers in the biomedical field. Their high surface area and needle-like shape make these systems especially attractive for diagnostic and therapeutic applications. Biocompatibility, cell internalization, biodistribution, and pharmacokinetic profile have all been reported to be length dependent. In this study, further insights are gotten on the role that the length of CNTs plays when developing novel contrast agents for magnetic resonance imaging (MRI). Two samples of CNTs with different length distribution have been decorated with radio-labeled iron oxide nanoparticles. Despite characterization of the prepared hybrids reveals a similar degree of loading and size of the nanoparticles for both samples, the use of short CNTs is found to enhance the MRI properties of the developed contrast agents both in vitro and in vivo compared to their long counterparts.

  11. Effect of Rashba and Dresselhaus Spin-Orbit Couplings on Electron Spin Polarization in a Hybrid Magnetic-Electric Barrier Nanostructure

    Science.gov (United States)

    Yang, Shi-Peng; Lu, Mao-Wang; Huang, Xin-Hong; Tang, Qiang; Zhou, Yong-Long

    2017-04-01

    A theoretical study has been carried out on the spin-dependent electron transport in a hybrid magnetic-electric barrier nanostructure with both Rashba and Dresselhaus spin-orbit couplings, which can be experimentally realized by depositing a ferromagnetic strip and a Schottky metal strip on top of a semiconductor heterostructure. The spin-orbit coupling-dependent transmission coefficient, conductance, and spin polarization are calculated by solving the Schrödinger equation exactly with the help of the transfer-matrix method. We find that both the magnitude and sign of the electron spin polarization vary strongly with the spin-orbit coupling strength. Thus, the degree of electron spin polarization can be manipulated by properly adjusting the spin-orbit coupling strength, and such a nanosystem can be employed as a controllable spin filter for spintronics applications.

  12. Hybrid magneto-optical mode converter made with a magnetic nanoparticles-doped SiO2/ZrO2 layer coated on an ion-exchanged glass waveguide

    Science.gov (United States)

    Amata, Hadi; Royer, François; Choueikani, Fadi; Jamon, Damien; Parsy, François; Broquin, Jean-Emmanuel; Neveu, Sophie; Jacques Rousseau, Jean

    2011-12-01

    This paper describes the possibility to achieve a TE-TM mode conversion in a magneto-optical hybrid waveguide operating at λ = 1550 nm. This hybrid device is made by coating a SiO2/ZrO2 layer doped with magnetic nanoparticles on an ion-exchanged glass waveguide. Soft annealing (90 °C) and UV treatment, both compatible with the ion exchange process, have been implemented to finalize the magneto-optical film. Optical characterizations that have been carried out demonstrated the efficiency of these hybrid structures in terms of lateral confinement and mode conversion. Indeed, TE to TM mode conversion has been observed when a longitudinal magnetic field is applied to the device. The amount of this conversion is discussed taking into account the distribution of light between the layer and the guide, and the modal birefringence of the structure.

  13. Efficient Synthesis of a Maghemite/Gold Hybrid Nanoparticle System as a Magnetic Carrier for the Transport of Platinum-Based Metallotherapeutics

    Directory of Open Access Journals (Sweden)

    Pavel Štarha

    2015-01-01

    Full Text Available The preparation and thorough characterization of a hybrid magnetic carrier system for the possible transport of activated platinum-based anticancer drugs, as demonstrated for cisplatin (cis-[Pt(NH32Cl2], CDDP, are described. The final functionalized mag/Au–LA–CDDP* system consists of maghemite/gold nanoparticles (mag/Au coated by lipoic acid (HLA; LA stands for deprotonated form of lipoic acid and functionalized by activated cisplatin in the form of cis-[Pt(NH32(H2O2]2+ (CDDP*. The relevant techniques (XPS, EDS, ICP-MS proved the incorporation of the platinum-containing species on the surface of the studied hybrid system. HRTEM, TEM and SEM images showed the nanoparticles as spherical with an average size of 12 nm, while their superparamagnetic feature was proven by 57Fe Mössbauer spectroscopy. In the case of mag/Au, mag/Au–HLA and mag/Au–LA–CDDP*, weaker magnetic interactions among the Fe3+ centers of maghemite, as compared to maghemite nanoparticles (mag, were detected, which can be associated with the non-covalent coating of the maghemite surface by gold. The pH and time-dependent stability of the mag/Au–LA–CDDP* system in different media, represented by acetate (pH 5.0, phosphate (pH 7.0 and carbonate (pH 9.0 buffers and connected with the release of the platinum-containing species, showed the ability of CDDP* to be released from the functionalized nanosystem.

  14. MAGNET

    CERN Multimedia

    B. Curé

    2012-01-01

      The magnet and its sub-systems were stopped at the beginning of the winter shutdown on 8th December 2011. The magnet was left without cooling during the cryogenics maintenance until 17th January 2012, when the cryoplant operation resumed. The magnet temperature reached 93 K. The vacuum pumping was maintained during this period. During this shutdown, the yearly maintenance was performed on the cryogenics, the vacuum pumps, the magnet control and safety systems, and the power converter and discharge lines. Several preventive actions led to the replacement of the electrovalve command coils, and the 20A DC power supplies of the magnet control system. The filters were cleaned on the demineralised water circuits. The oil of the diffusion pumps was changed. On the cryogenics, warm nitrogen at 343 K was circulated in the cold box to regenerate the filters and the heat exchangers. The coalescing filters have been replaced at the inlet of both the turbines and the lubricant trapping unit. The active cha...

  15. MAGNET

    CERN Multimedia

    Benoit Curé

    2010-01-01

    The magnet was successfully operated at the end of the year 2009 despite some technical problems on the cryogenics. The magnet was ramped up to 3.8 T at the end of November until December 16th when the shutdown started. The magnet operation met a few unexpected stops. The field was reduced to 3.5 T for about 5 hours on December 3rd due to a faulty pressure sensor on the helium compressor. The following day the CERN CCC stopped unintentionally the power converters of the LHC and the experiments, triggering a ramp down that was stopped at 2.7 T. The magnet was back at 3.8 T about 6 hours after CCC sent the CERN-wide command. Three days later, a slow dump was triggered due to a stop of the pump feeding the power converter water-cooling circuit, during an intervention on the water-cooling plant done after several disturbances on the electrical distribution network. The magnet was back at 3.8 T in the evening the same day. On December 10th a break occurred in one turbine of the cold box producing the liquid ...

  16. MAGNET

    CERN Multimedia

    B. Curé

    2013-01-01

      The magnet was operated without any problem until the end of the LHC run in February 2013, apart from a CERN-wide power glitch on 10 January 2013 that affected the CMS refrigerator, causing a ramp down to 2 T in order to reconnect the coldbox. Another CERN-wide power glitch on 15 January 2013 didn’t affect the magnet subsystems, the cryoplant or the power converter. At the end of the magnet run, the reconnection of the coldbox at 2.5 T was tested. The process will be updated, in particular the parameters of some PID valve controllers. The helium flow of the current leads was reduced but only for a few seconds. The exercise will be repeated with the revised parameters to validate the automatic reconnection process of the coldbox. During LS1, the water-cooling services will be reduced and many interventions are planned on the electrical services. Therefore, the magnet cryogenics and subsystems will be stopped for several months, and the magnet cannot be kept cold. In order to avoid unc...

  17. MAGNET

    CERN Multimedia

    B. Curé

    2011-01-01

    The CMS magnet has been running steadily and smoothly since the summer, with no detected flaw. The magnet instrumentation is entirely operational and all the parameters are at their nominal values. Three power cuts on the electrical network affected the magnet run in the past five months, with no impact on the data-taking as the accelerator was also affected at the same time. On 22nd June, a thunderstorm caused a power glitch on the service electrical network. The primary water cooling at Point 5 was stopped. Despite a quick restart of the water cooling, the inlet temperature of the demineralised water on the busbar cooling circuit increased by 5 °C, up to 23.3 °C. It was kept below the threshold of 27 °C by switching off other cooling circuits to avoid the trigger of a slow dump of the magnet. The cold box of the cryogenics also stopped. Part of the spare liquid helium volume was used to maintain the cooling of the magnet at 4.5 K. The operators of the cryogenics quickly restarted ...

  18. Electric field control of magnetization in Cu2O/porous anodic alumina hybrid structures at room temperature

    Science.gov (United States)

    Qi, L. Q.; Liu, H. Y.; Sun, H. Y.; Liu, L. H.; Han, R. S.

    2016-04-01

    Cu2O nanoporous films are deposited on porous anodic alumina (PAA) substrates by DC-reactive magnetron sputtering. This paper focuses on voltage driven magnetization switching in Cu2O/PAA (CP) composite films prepared by DC-reactive magnetron sputtering. By applying a dc electric field, the magnetization of the CP composite films can be controlled in a reversible and reproducible way and shows an analogous on-off behavior. The magnitude of the change in the magnetization was about 75 emu/cm3 as the electric field was switched on and off. Resistive switching behavior was also observed in as-prepared CP composite films. Further analysis indicated that the formation/rupture of conducting filaments composed of oxygen vacancies is likely responsible for the changes in the magnetization as well as in the resistivity. Such reversible change of magnetization controlled by an electric field at room temperature may have applications in spintronics and power efficient data storage technologies.

  19. MAGNETS

    Science.gov (United States)

    Hofacker, H.B.

    1958-09-23

    This patent relates to nmgnets used in a calutron and more particularly to means fur clamping an assembly of magnet coils and coil spacers into tightly assembled relation in a fluid-tight vessel. The magnet comprises windings made up of an assembly of alternate pan-cake type coils and spacers disposed in a fluid-tight vessel. At one end of the tank a plurality of clamping strips are held firmly against the assembly by adjustable bolts extending through the adjacent wall. The foregoing arrangement permits taking up any looseness which may develop in the assembly of coils and spacers.

  20. A hybrid approach for quantizing complicated motion of a charged particle in time-varying magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Menouar, Salah [Laboratory of Optoelectronics and Compounds (LOC), Department of Physics, Faculty of Science, University of Ferhat Abbas Setif 1, Setif 19000 (Algeria); Choi, Jeong Ryeol, E-mail: choiardor@hanmail.net [Department of Radiologic Technology, Daegu Health College, Yeongsong 15, Buk-gu, Daegu 702-722 (Korea, Republic of)

    2015-02-15

    Quantum characteristics of a charged particle subjected to a singular oscillator potential under an external magnetic field is investigated via SU(1,1) Lie algebraic approach together with the invariant operator and the unitary transformation methods. The system we managed is somewhat complicated since we considered not only the time-variation of the effective mass of the system but also the dependence of the external magnetic field on time in an arbitrary fashion. In this case, the system is a kind of time-dependent Hamiltonian systems which require more delicate treatment when we study it. The complete wave functions are obtained without relying on the methods of perturbation and/or approximation, and the global phases of the system are identified. To promote the understanding of our development, we applied it to a particular case, assuming that the effective mass slowly varies with time under a time-dependent magnetic field.

  1. Magnetic Fields of Be Stars: Preliminary Results from a Hybrid Analysis of the MiMeS Sample

    Science.gov (United States)

    Wade, G. A.; Petit, V.; Grunhut, J. H.; Neiner, C.; MiMeS Collaboration

    2016-11-01

    In the context of the MiMeS survey of magnetism in massive stars, 85 classical Be stars were observed in circular polarization with the aim of detecting magnetic fields at their surfaces. No direct evidence of such fields is found, in contrast to the significant rate of detection (5-10%) in non-Be B-type stars. In this paper we describe the sample properties, the methodology and the data quality. We describe a novel method, previously applied to Herbig Ae/Be stars, that allows us to infer upper limits on organized (dipolar) magnetic fields present in the photospheres of our targets. We review the characteristics and robustness of this null result, and discuss its implications.

  2. 76 FR 44402 - Proposed Information Collection (Application for Automobile or Other Conveyance and Adaptive...

    Science.gov (United States)

    2011-07-25

    ... AFFAIRS Proposed Information Collection (Application for Automobile or Other Conveyance and Adaptive...' eligibility for automobile adaptation equipment or other conveyance allowance. DATES: Written comments and... techniques or the use of other forms of information technology. Title: Application for Automobile or...

  3. 基于磁路分析的轴向混合磁轴承径向承载力解析计算%Calculation of Radial Electromagnetic Force of Axial Hybrid Magnetic Bearing Based on Magnetic Circuit Analysis

    Institute of Scientific and Technical Information of China (English)

    张云鹏; 刘淑琴; 李红伟; 范友鹏

    2012-01-01

    研究轴向混合磁轴承实现五自由度悬浮时,需要计算径向承载力与磁轴承结构参数以及永磁体参数之间的关系。为了解决轴向混合磁轴承缺乏径向承载力解析数学模型的问题,该文在分析轴向混合磁轴承磁路以及各部分磁导的基础上,结合稀土永磁体的工作特性,用虚位移法得出了轴向混合磁轴承的径向承载力解析数学模型。模型表明,在小径向位移时,该型的混合磁轴承径向承载力随着径向位移增加而增加,近似线性关系,径向承载力和刚度随轴向气隙增大而减小;磁轴承径向承载力随永磁体的有效长度增加呈现先增大后趋近饱和。利用有限元方法对径向承载力进行仿真计算,仿真结果与模型计算结果基本吻合。%In studying axial hybrid magnetic bearing (HMB) for suspension in five degree of freedom (DOF), the relationship between radial electromagnetic force and magnetic bearing structural parameters and permanent magnet parameters should be calculated. In order to overcome the lack of analytical calculation model for radial electromagnet force of axial HMB, based on magnetic circuit analysis and calculation of magnetic conductance for each parts, the analytical calculation model for radial electromagnet force of axial HMB is proposed in this paper. The analytical formulation of radial electromagnetic force is derived by using virtual displacement method and demagnetization characteristics of the rare earth permanent magnet. It is found that the radial electromagnetic force increases with the radial displacement increasing approximately in linear relationship, and the radial force and stiffness decreases with the axial gap increasing. The radial electromagnetic force increased and then saturated with increasing permanent magnet effective length. The model of axial HMB is simulated by finite-element method software and the simulation results are basically in

  4. Electromagnetic Comparison of 3-, 5- and 7-phases Permanent-Magnet Synchronous Machines : Mild Hybrid Traction Application

    Directory of Open Access Journals (Sweden)

    D. Ouamara

    2016-09-01

    Full Text Available Authors compare the electromagnetic performances of three multi-phases permanent-magnet (PM synchronous machines (PMSM for Mild Hybridtraction application. This comparison was made using two-dimensional (2-D numerical simulations in transient magnetic with eddy-current reaction field in the PMs. The best machine was determined using an energetic analysis (i.e., losses, torque and efficiency according specifications. In this study, the non-overlapping winding with double layer (i.e. all teeth wound type was used. The winding synthesis is based on the "Star of slots" method as well as the Fourier series decomposition of the magnetomotive force (MMF.

  5. MAGNET

    CERN Multimedia

    B. Curé

    2011-01-01

    The magnet ran smoothly in the last few months until a fast dump occurred on 9th May 2011. Fortunately, this occurred in the afternoon of the first day of the technical stop. The fast dump was due to a valve position controller that caused the sudden closure of a valve. This valve is used to regulate the helium flow on one of the two current leads, which electrically connects the coil at 4.5 K to the busbars at room temperature. With no helium flow on the lead, the voltage drop and the temperatures across the leads increase up to the defined thresholds, triggering a fast dump through the Magnet Safety System (MSS). The automatic reaction triggered by the MSS worked properly. The helium release was limited as the pressure rise was just at the limit of the safety valve opening pressure. The average temperature of the magnet reached 72 K. It took four days to recover the temperature and refill the helium volumes. The faulty valve controller was replaced by a spare one before the magnet ramp-up resumed....

  6. Magnetic/NIR-responsive drug carrier, multicolor cell imaging, and enhanced photothermal therapy of gold capped magnetite-fluorescent carbon hybrid nanoparticles

    Science.gov (United States)

    Wang, Hui; Cao, Guixin; Gai, Zheng; Hong, Kunlun; Banerjee, Probal; Zhou, Shuiqin

    2015-04-01

    This paper reports a type of multifunctional hybrid nanoparticle (NP) composed of gold nanocrystals coated on and/or embedded in a magnetite-fluorescent porous carbon core-shell NP template (Fe3O4@PC-CDs-Au) for biomedical applications, including magnetic/NIR-responsive drug release, multicolor cell imaging, and enhanced photothermal therapy. The synthesis of the Fe3O4@PC-CDs-Au NPs firstly involves the preparation of core-shell template NPs with magnetite nanocrystals clustered in the cores and fluorescent carbon dots (CDs) embedded in a porous carbon shell, followed by an in situ reduction of silver ions (Ag+) loaded in the porous carbon shell and a subsequent replacement of Ag NPs with Au NPs through a galvanic replacement reaction using HAuCl4 as a precursor. The Fe3O4@PC-CDs-Au NPs can enter the intracellular region and light up mouse melanoma B16F10 cells in multicolor mode. The porous carbon shell, anchored with hydrophilic hydroxyl/carboxyl groups, endows the Fe3O4@PC-CDs-Au NPs with excellent stability in the aqueous phase and a high loading capacity (719 mg g-1) for the anti-cancer drug doxorubicin (DOX). The superparamagnetic Fe3O4@PC-CDs-Au NPs with a saturation magnetization of 23.26 emu g-1 produce localized heat under an alternating magnetic field, which triggers the release of the loaded drug. The combined photothermal effects of the Au nanocrystals and the CDs on/in the carbon shell can not only regulate the release rate of the loaded drug, but also efficiently kill tumor cells under NIR irradiation. Benefitting from their excellent optical properties, their magnetic field and NIR light-responsive drug release capabilities and their enhanced photothermal effect, such nanostructured Fe3O4@PC-CDs-Au hybrid NPs are very promising for simultaneous imaging diagnostics and high efficacy therapy.This paper reports a type of multifunctional hybrid nanoparticle (NP) composed of gold nanocrystals coated on and/or embedded in a magnetite-fluorescent porous

  7. Crystal structure, thermochromic and magnetic properties of organic-inorganic hybrid compound: (C7H7N2S)2CuCl4

    Science.gov (United States)

    Vishwakarma, Ashok K.; Kumari, Reema; Ghalsasi, Prasanna S.; Arulsamy, Navamoney

    2017-08-01

    The synthesis, thermal analysis, crystal structure and magnetic properties of (2-aminobenzothiazolium)2CuCl4, organic-inorganic hybrid compound, have been described. The compound crystallizes in the monoclinic space group P21/c with two formula units in a unit cell of dimensions a = 6.9522(4) Å, b = 9.6979(4) Å, c = 13.9633(6) Å, β = 97.849(3)° and volume 930.83(8) Å3 at 150(2) K. The structure consists of isolated nearly square planer [CuC14]2- units, with somewhat longer than normal Cusbnd Cl bond lengths [Cusbnd Cl (average) = 2.2711 Å]. The magnetic measurements of (2-aminobenzothiazolium)2CuCl4 using SQUID magnetometer show paramagnetic nature of the compound. Thermal measurements (TG-DTA and DSC) on this compound showed reversible phase transition at 83 °C. This transition is accompanied by the reversible change in colour of the prismatic crystal from green to dark brown, thermochromic behaviour. Temperature dependent EPR measurements on powdered sample ascertain change in coordination sphere around Cu(II) with shift in g|| = 2.150 and g⊥ = 2.071 at room temperature, typical of square planar, to g|| = 2.201 and g⊥ = 2.182 at 170 °C, typical of distorted tetrahedral geometry.

  8. Trend of tunnel magnetoresistance and variation in threshold voltage for keeping data load robustness of metal–oxide–semiconductor/magnetic tunnel junction hybrid latches

    Energy Technology Data Exchange (ETDEWEB)

    Ohsawa, T. [Center for Spintronics Integrated Systems, Tohoku University, Sendai 980-8579 (Japan); Ikeda, S.; Hanyu, T.; Ohno, H. [Center for Spintronics Integrated Systems, Tohoku University, Sendai 980-8579 (Japan); Research Institute of Electrical Communication, Tohoku University, Sendai 980-8577 (Japan); Center for Innovative Integrated Electronic Systems, Tohoku University, Sendai 980-8579 (Japan); Endoh, T., E-mail: tetsuo.endoh@cies.tohoku.ac.jp [Center for Spintronics Integrated Systems, Tohoku University, Sendai 980-8579 (Japan); Center for Innovative Integrated Electronic Systems, Tohoku University, Sendai 980-8579 (Japan); Graduate School of Engineering, Tohoku University, Sendai 980-8579 (Japan)

    2014-05-07

    The robustness of data load of metal–oxide–semiconductor/magnetic tunnel junction (MOS/MTJ) hybrid latches at power-on is examined by using Monte Carlo simulation with the variations in magnetoresistances for MTJs and in threshold voltages for MOSFETs involved in 90 nm technology node. Three differential pair type spin-transfer-torque-magnetic random access memory cells (4T2MTJ, 6T2MTJ, and 8T2MTJ) are compared for their successful data load at power-on. It is found that the 4T2MTJ cell has the largest pass area in the shmoo plot in TMR ratio (tunnel magnetoresistance ratio) and V{sub dd} in which a whole 256 kb cell array can be powered-on successfully. The minimum TMR ratio for the 4T2MTJ in 0.9 V < V{sub dd} < 1.9 V is 140%, while the 6T2MTJ and the 8T2MTJ cells require TMR ratio larger than 170%.

  9. Cryogenic system for the 43 T Hybrid Magnet at LNCMI Grenoble: from the needs to the commissioning

    Science.gov (United States)

    Ronayette, L.; Crispel, S.; Berriaud, C.; Berthier, R.; Caplanne, G.; Gorski, M.; Graffin, P.; Hanoux, P.; Hergat, T.; Hervieu, B.; Juster, FP; Pfister, R.; Pissard, M.; Pugnat, P.; Vincent, B.

    2017-02-01

    LNCMI is one of the unique worldwide laboratories offering the scientific community access to various experimental conditions with continuous magnetic fields well above 20 T. LNCMI is currently developing a large field flexible experimental platform. One configuration will produce a continuous magnetic field of 43 T in a 34 mm warm bore aperture from the combination of homemade resistive electromagnet inserts and a large bore outer superconducting magnet (1.1 m internal cold dia.), the latter being built in close collaboration with CEA-IRFU Saclay. The superconducting magnet with its mechanical structure and its helium vessel will represent a mass of 22 tons to cool down to 1.8 K and maintain at this temperature 10 months per year. An overview of the project will be given focusing on the cryogenics and particularly on the helium liquefier designed and manufactured by Air Liquide Advanced Technologies. This system - the most powerful even produced in the Helial ML range - and its ancillaries has been integrated and commissioned as a turnkey system in the existing site of LNCMI.

  10. Mesoscopic spin-flip transport through a hybrid system with a single molecular dot system applied with ac magnetic fields

    Energy Technology Data Exchange (ETDEWEB)

    Chen Qiao, E-mail: cqhy1127@yahoo.com.c [Department of Maths and Physics, Hunan Institute of Engineering, Xiangtan 411104 (China); Liu Jin [Institute of Theoretical Physics, Chinese Academy of Science, Beijing 100190 (China); Wang Zhiyong [School of Optoelectronic Information, Chongqing University of Technology, Chongqing 400054 (China)

    2011-01-17

    We have investigated the current for the system of vibrating quantum dot irradiated with a rotating magnetic field and an oscillating magnetic field by nonequilibrium Green's function. The rotating magnetic field rotates with the angular frequency {omega}{sub r} around the z-axis with the tilt angle {theta}, and the time-oscillating magnetic field is located in the z-axis with the angular frequency {omega}. Different behaviors have been shown in the presence of electron-phonon interaction (EPI) which plays a significant role in the transport. The current displays asymmetric behavior as the source-drain bias eV=0, novel side peaks or shoulders can be found due to the phonon absorption and emission procedure, and the negative differential resistance becomes stronger as the parameter g increases. Furthermore, the strong EPI also destroys the quasiperiodic oscillations of current in the region {mu}{sub 0}B{sub 1}>2.5{Delta}. The electron transport properties are also significantly influenced by the linewidth function {Gamma}.

  11. 78 FR 53476 - Notice of Realty Action: Classification for Lease and Subsequent Conveyance for Recreation and...

    Science.gov (United States)

    2013-08-29

    ... Bureau of Land Management Notice of Realty Action: Classification for Lease and Subsequent Conveyance for... Management (BLM) has examined and found suitable for classification for lease and subsequent conveyance under... classification of the land for lease and subsequent conveyance of the land, and the environmental...

  12. 75 FR 10817 - Notice of Realty Action: Recreation and Public Purposes Act Classification and Conveyance; Lake...

    Science.gov (United States)

    2010-03-09

    ...: Interested parties may submit written comments regarding this proposed classification or lease/conveyance of... County, Florida, has been examined and found suitable for classification for lease or conveyance under... for lease or conveyance under the R&PP Act and leasing under the mineral leasing laws....

  13. A new conveyor system based on a passive magnetic levitation unit having repulsive-type magnetic bearings

    Science.gov (United States)

    Ohji, T.; Ichiyama, S.; Amei, K.; Sakui, M.; Yamada, S.

    2004-05-01

    A magnetic repulsive-type conveyor system is proposed as a new application of repulsive-type magnetic bearings, which use repulsive forces between the stator and rotor permanent magnets. The proposed conveyer is composed by aligning many passive magnetic levitation units. Each unit also contains electromagnets to oscillate a levitator shaft in the radial direction. The way of generating vibration and rotation in the conveyance direction was examined by the various excitation methods.

  14. Study on interparticle interaction for dry HGMS system using pneumatic conveyance

    Science.gov (United States)

    Nakai, Y.; Senkawa, K.; Mishima, F.; Akiyama, Y.; Nishijima, S.

    2011-11-01

    The interfusion of ferromagnetic impurities such as metallic wear debris has been one of the problems in the manufacturing process of powder products. To remove such debris, we developed high gradient magnetic separation system (HGMS) under dry process which has many advantages over the conventional HGMS system under wet process. In dry condition, interparticle forces such as van der Waals' force, the liquid bridge force and the electrostatic force contribute to aggregation of particles. This leads to the blockage of magnetic filter which is the major problem of dry HGMS system. To solve this problem, we developed dry HGMS system using pneumatic conveyance. In order to investigate the mechanism of powder aggregation in dry HGMS, it is necessary to simulate the behavior of particles considering interparticle interaction. Therefore we conducted the numerical analysis of the behavior of particles using discrete element method (DEM). As a result, the calculated values of repose angle showed a good agreement with measured value. On the basis of the results above, we succeeded in expressing the magnetic aggregation behavior which is one of the characteristics of the mixed powder containing ferromagnetic particles.

  15. Articulated pipes conveying fluid pulsating with high frequency

    DEFF Research Database (Denmark)

    Jensen, Jakob Søndergaard

    1999-01-01

    Stability and nonlinear dynamics of two articulated pipes conveying fluid with a high-frequency pulsating component is investigated. The non-autonomous model equations are converted into autonomous equations by approximating the fast excitation terms with slowly varying terms. The downward hanging...... pipe position will lose stability if the mean flow speed exceeds a certain critical value. Adding a pulsating component to the fluid flow is shown to stabilize the hanging position for high values of the ratio between fluid and pipe-mass, and to marginally destabilize this position for low ratios...

  16. Static stability of collapsible tube conveying non-Newtonian fluid

    CERN Document Server

    Yushutin, V S

    2014-01-01

    The global static stability of a Starling Resistor conveying non-Newtonian fluid is considered. The Starling Resistor consists of two rigid circular tubes and axisymmetric collapsible tube mounted between them. Upstream and downstream pressures are the boundary condition as well as external to the collapsible tube pressure. Quasi one-dimensional model has been proposed and a boundary value problem in terms of nondimensional parameters obtained. Nonuniqueness of the boundary value problem is regarded as static instability. The analytical condition of instability which defines a surface in parameter space has been studied numerically. The influence of fluid rheology on stability of collapsible tube is established.

  17. Does microblogging convey firm-specific information? Evidence from China

    Science.gov (United States)

    Shen, Dehua; Li, Xiao; Xue, Mei; Zhang, Wei

    2017-09-01

    This paper investigates the impact of opening microblogging account in Sina Weibo on the diffusion of firm-specific information in Chinese stock market. With the unique sample of firms opening their official accounts, the empirical results show that this newly emerged information diffusion channel, i.e., Sina Weibo, plays an important role in conveying firm-specific information to the market. Generally speaking, these empirical findings have practical implications to securities regulators who have interest in monitoring the diffused information via social media.

  18. Finite Element Analysis of Fluid-Conveying Timoshenko Pipes

    Directory of Open Access Journals (Sweden)

    Chih-Liang Chu

    1995-01-01

    Full Text Available A general finite element formulation using cubic Hermitian interpolation for dynamic analysis of pipes conveying fluid is presented. Both the effects of shearing deformations and rotary inertia are considered. The development retains the use of the classical four degrees-of-freedom for a two-node element. The effect of moving fluid is treated as external distributed forces on the support pipe and the fluid finite element matrices are derived from the virtual work done due to the fluid inertia forces. Finite element matrices for both the support pipe and moving fluid are derived and given explicitly. A numerical example is given to demonstrate the validity of the model.

  19. Reducing Computational Overhead of Network Coding with Intrinsic Information Conveying

    DEFF Research Database (Denmark)

    Heide, Janus; Zhang, Qi; Pedersen, Morten V.;

    is RLNC (Random Linear Network Coding) and the goal is to reduce the amount of coding operations both at the coding and decoding node, and at the same time remove the need for dedicated signaling messages. In a traditional RLNC system, coding operation takes up significant computational resources and adds......This paper investigated the possibility of intrinsic information conveying in network coding systems. The information is embedded into the coding vector by constructing the vector based on a set of predefined rules. This information can subsequently be retrieved by any receiver. The starting point...

  20. Field errors in hybrid insertion devices

    Energy Technology Data Exchange (ETDEWEB)

    Schlueter, R.D. [Lawrence Berkeley Lab., CA (United States)

    1995-02-01

    Hybrid magnet theory as applied to the error analyses used in the design of Advanced Light Source (ALS) insertion devices is reviewed. Sources of field errors in hybrid insertion devices are discussed.

  1. MAGNET

    CERN Multimedia

    B. Curé

    2013-01-01

    The magnet is fully stopped and at room temperature. The maintenance works and consolidation activities on the magnet sub-systems are progressing. To consolidate the cryogenic installation, two redundant helium compressors will be installed as ‘hot spares’, to avoid the risk of a magnet downtime in case of a major failure of a compressor unit during operation. The screw compressors, their motors, the mechanical couplings and the concrete blocks are already available and stored at P5. The metallic structure used to access the existing compressors in SH5 will be modified to allow the installation of the two redundant ones. The plan is to finish the installation and commissioning of the hot spare compressors before the summer 2014. In the meantime, a bypass on the high-pressure helium piping will be installed for the connection of a helium drier unit later during the Long Shutdown 1, keeping this installation out of the schedule critical path. A proposal is now being prepared for the con...

  2. MAGNET

    CERN Multimedia

    B. Curé

    MAGNET During the winter shutdown, the magnet subsystems went through a full maintenance. The magnet was successfully warmed up to room temperature beginning of December 2008. The vacuum was broken later on by injecting nitrogen at a pressure just above one atmosphere inside the vacuum tank. This was necessary both to prevent any accidental humidity ingress, and to allow for a modification of the vacuum gauges on the vacuum tank and maintenance of the diffusion pumps. The vacuum gauges had to be changed, because of erratic variations on the measurements, causing spurious alarms. The new type of vacuum gauges has been used in similar conditions on the other LHC experiments and without problems. They are shielded against the stray field. The lubricants of the primary and diffusion pumps have been changed. Several minor modifications were also carried out on the equipment in the service cavern, with the aim to ease the maintenance and to allow possible intervention during operation. Spare sensors have been bough...

  3. MAGNET

    CERN Multimedia

    Benoit Curé

    2010-01-01

    The magnet worked very well at 3.8 T as expected, despite a technical issue that manifested twice in the cryogenics since June. All the other magnet sub-systems worked without flaw. The issue in the cryogenics was with the cold box: it could be observed that the cold box was getting progressively blocked, due to some residual humidity and air accumulating in the first thermal exchanger and in the adsorber at 65 K. This was later confirmed by the analysis during the regeneration phases. An increase in the temperature difference between the helium inlet and outlet across the heat exchanger and a pressure drop increase on the filter of the adsorber were observed. The consequence was a reduction of the helium flow, first compensated by the automatic opening of the regulation valves. But once they were fully opened, the flow and refrigeration power reduced as a consequence. In such a situation, the liquid helium level in the helium Dewar decreased, eventually causing a ramp down of the magnet current and a field...

  4. MAGNET

    CERN Multimedia

    Benoit Curé.

    The magnet operation restarted end of June this year. Quick routine checks of the magnet sub-systems were performed at low current before starting the ramps up to higher field. It appeared clearly that the end of the field ramp down to zero was too long to be compatible with the detector commissioning and operations plans. It was decided to perform an upgrade to keep the ramp down from 3.8T to zero within 4 hours. On July 10th, when a field of 1.5T was reached, small movements were observed in the forward region support table and it was decided to fix this problem before going to higher field. At the end of July the ramps could be resumed. On July 28th, the field was at 3.8T and the summer CRAFT exercise could start. This run in August went smoothly until a general CERN wide power cut took place on August 3rd, due to an insulation fault on the high voltage network outside point 5. It affected the magnet powering electrical circuit, as it caused the opening of the main circuit breakers, resulting in a fast du...

  5. Study of the Advantages of Internal Permanent Magnet Drive Motor with Selectable Windings for Hybrid-Electric Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Otaduy, P.J.; Hsu, J.S.; Adams, D.J.

    2007-11-30

    This report describes research performed on the viability of changing the effectively active number of turns in the stator windings of an internal permanent magnet (IPM) electric motor to strengthen or weaken the magnetic fields in order to optimize the motor's performance at specific operating speeds and loads. Analytical and simulation studies have been complemented with research on switching mechanisms to accomplish the task. The simulation studies conducted examine the power and energy demands on a vehicle following a series of standard driving cycles and the impact on the efficiency and battery size of an electrically propelled vehicle when it uses an IPM motor with turn-switching capabilities. Both full driving cycle electric propulsion and propulsion limited starting from zero to a set speed have been investigated.

  6. Analysis of Magnetic Properties on the Outer Rotor Type Hybrid Stepping Motors Using 3D Finite Element Method

    Science.gov (United States)

    Enomoto, Yuji; Miyata, Kenji; Oonishi, Kazuo; Motegi, Yasuaki

    The three-dimensional magnetic field analysis has clarified the effect of several structural and manufacturing factors on the properties of the outer rotor type stepping motors. (1) The number of rotor teeth, 128, can make a unit step angle under 0.5 degree and a cogging torque under 1mNm for the outer rotor type stepping motor with the outer diameter under 60mm and with the output torque above 0.4Nm. (2) The permanent magnet flux has an optimal value dependent on the thickness of the laminated core to maximize the motor torque. (3) The lamination stacking error of the small teeth of the rotor and stator has a large effect on the cogging torque of the stepping motor.

  7. Graphene supported silver@silver chloride & ferroferric oxide hybrid, a magnetically separable photocatalyst with high performance under visible light irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Zhong, Suting; Jiang, Wei, E-mail: superfine_jw@126.com; Han, Mei; Liu, Gongzong; Zhang, Na; Lu, Yue

    2015-08-30

    Graphical abstract: - Highlights: • The composites were synthesized via a facile and effective process. • Plenty of Fe{sub 3}O{sub 4} and Ag@AgCl nanoparticles are deposited on the reduced graphene oxide nanosheets. • The catalyst exhibited an enhanced photocatalytic performance and magnetic property. • The catalyst is stable under the visible light irradiation. - Abstract: A stable magnetic separable plasmonic photocatalyst was successfully fabricated by grafting silver@silver chloride (Ag@AgCl) and ferroferric oxide (Fe{sub 3}O{sub 4}) nanoparticles on graphene sheets. The composite exhibited high activity degrading methylene blue (MB) and rhodamine B (RB) under visible light irradiation: decomposition 97.4% of MB in 100 min and 97.9% of RB in 120 min. The enhanced photocatalytic activities can be attributed to synergistic effect between Ag@AgCl and graphene: the effective charge transfer from Ag@AgCl to graphene thus promotes the separation of electron–hole pairs. Moreover, the excellent magnetic property gives a more convenient way to recycle the photocatalysts.

  8. Preparation and application of a magnetic organic-inorganic hybrid nanocatalyst for the synthesis of α-aminonitriles

    Indian Academy of Sciences (India)

    ALI MALEKI; RAZIEH FIROUZI HAJI; MINA GHASSEMI; HOSSEIN GHAFURI

    2017-04-01

    This article is the first report of the catalytic application of copper ferrite-coated chitosan in organic reactions as a bio-nanocomposite. CuFe2O4/chitosan was used as a hybrid nanocatalyst for the multicomponent Strecker synthesis of α-aminonitriles by using aryl aldehydes, trimethylsilyl cyanide (TMSCN) and aromatic amines at room temperature in ethanol as a green solvent. The catalyst was characterized by Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), field-emission scanning electron microscopy (FE-SEM) and energy-dispersive X-ray spectroscopy (EDX) analyses. The nanocatalyst was recovered and reused several times without significant loss of catalytic activity. The organic products were obtained easily without need for column chromatography in good-to-excellent yields.

  9. The application of enhanced conveyance calculations in flood prediction

    Energy Technology Data Exchange (ETDEWEB)

    Forbes, G.; Pender, G. [Glasgow Univ. (United Kingdom). Dept. of Civil Engineering

    2000-07-01

    Over the past twenty years extensive research has been conducted on overbank flow behaviour during river floods. When the main channel flow interacts with flood plain flow, secondary losses other than bed friction act to retard the flow. Traditional one-dimensional modelling tools commonly used in the UK, such as ISIS or HEC-RAS, currently take no account of these secondary losses In an attempt to establish the nature and significance of secondary losses the flood channel facility (FCF) was constructed at HR Wallingford in 1987. As a direct result of the meandering channel series B experiments the James and Wark Method (1992) was developed to predict stage discharge relationships. For a given water level, this method will calculate a value of discharge taking into account the secondary losses. The paper will report on the modification of the method to fit into the river modelling software ISIS. Within the ISIS framework the James and Wark Method is used to calculate conveyance. The aim is to produce a more accurate flood prediction tool than currently exists. The newly developed software has been tested on laboratory data and shown to be highly accurate in both stage discharge and water level prediction. The software has since been applied to natural rivers that have experienced significant flood events. The paper will illustrate the significance of applying flume based conveyance calculation methods at the field scale. (orig.)

  10. Customized Architecture for Complex Routing Analysis: Case Study for the Convey Hybrid-Core Computer

    Science.gov (United States)

    2014-02-18

    circuits  that  can   be  reconfigured  using  a  hardware  description  language  such  as   Verilog .  Current   state...a   Verilog -­‐based  design  environment,  is  used  to  implement  a  custom-­‐ designed  computer  architecture,  or

  11. MAGNET

    CERN Multimedia

    Benoit Curé

    The magnet subsystems resumed operation early this spring. The vacuum pumping was restarted mid March, and the cryogenic power plant was restarted on March 30th. Three and a half weeks later, the magnet was at 4.5 K. The vacuum pumping system is performing well. One of the newly installed vacuum gauges had to be replaced at the end of the cool-down phase, as the values indicated were not coherent with the other pressure measurements. The correction had to be implemented quickly to be sure no helium leak could be at the origin of this anomaly. The pressure measurements have been stable and coherent since the change. The cryogenics worked well, and the cool-down went quite smoothly, without any particular difficulty. The automated start of the turbines had to be fine-tuned to get a smooth transition, as it was observed that the cooling power delivered by the turbines was slightly higher than needed, causing the cold box to stop automatically. This had no consequence as the cold box safety system acts to keep ...

  12. MAGNET

    CERN Multimedia

    B. Curé

    During the winter shutdown, the magnet subsystems went through a full maintenance. The magnet was successfully warmed up to room temperature beginning of December 2008. The vacuum was broken later on by injecting nitrogen at a pressure just above one atmosphere inside the vacuum tank. This was necessary both to prevent any accidental humidity ingress, and to allow for a modification of the vacuum gauges on the vacuum tank and maintenance of the diffusion pumps. The vacuum gauges had to be changed, because of erratic variations on the measurements, causing spurious alarms. The new type of vacuum gauges has been used in similar conditions on the other LHC experiments and without problems. They are shielded against the stray field. The lubricants of the primary and diffusion pumps have been changed. Several minor modifications were also carried out on the equipment in the service cavern, with the aim to ease the maintenance and to allow possible intervention during operation. Spare sensors have been bought. Th...

  13. Hybrid Simulation of Supersonic Flow of Weakly Ionized Plasma along Open Field Magnetic Line Effect of Background Pressure

    Science.gov (United States)

    Laosunthara, Ampan; Akatsuka, Hiroshi

    2016-09-01

    In previous study, we experimentally examined physical properties of supersonic flow of weakly ionized expanding arc-jet plasma through an open magnetic field line (Bmax 0.16T). We found supersonic velocity of helium plasma up to Mach 3 and the space potential drop at the end of the magnets. To understand the plasma in numerical point of view, the flows of ion and neutral are treated by particle-based Direct Simulation Monte Carlo (DSMC) method, electron is treated as a fluid. The previous numerical study, we assumed 2 conditions. Ion and electron temperatures were the same (LTE condition). Ion and electron velocities were the same (current-free condition). We found that ion velocity decreased by collision with residual gas molecules (background pressure). We also found that space potential changing with background pressure. In other words, it was indicated that electric field exists and the current-free assumption is not proper. In this study, we add electron continuity and electron momentum equations to obtain electron velocity and space potential. We find that space potential changing with background pressure slightly. It is indicated that electron is essential to space potential formation than ion.

  14. Experimental characterization of the lower hybrid wave field on the first pass using a magnetic probe array

    Science.gov (United States)

    Shinya, T.; Baek, S. G.; Wallace, G. M.; Parker, R. R.; Shiraiwa, S.; Takase, Y.

    2016-10-01

    Experimental characterization of the lower hybrid (LH) wave propagation from the launcher to the core plasma is important to validate an antenna spectrum model and to identify parasitic wave-edge plasma interactions occurring in front of the launcher. On Alcator C-Mod, the wave frequency spectrum and dominant parallel wavenumber are characterized with two probe arrays installed near the edge plasma. The first one is mounted on a radially movable structure that is about 108 deg toroidally away from the launcher. A phasing scan experiment at moderate density suggests a resonance-cone propagation of the launched slow LH wave with a finite spectral width. As plasma density is raised, the measured power decreases, correlated with the observed loss of efficiency. Recently, the second probe array with an increased number of probes has been installed on a limiter that is 54 deg. toroidally away from the launcher, which is expected to be dominantly sensitive to the wave-field directly leaving the launcher. An initial measurement shows that the probe array detects a coherent wave field. A full-wave model to evaluate the wave electric-field pattern in front of the probe array is under development. If available, further experimental and modeling results will be presented. Supported by USDoE Award(s) DE-FC02-99ER54512 and Japan/U.S. Cooperation in Fusion Research and Development.

  15. Humour: Power conveying social structures inside forensic mental health nursing

    DEFF Research Database (Denmark)

    Gildberg, Frederik Alkier; Paaske, Kristian Jul; Rasmussen, Vivian L.;

    2016-01-01

    mental health staff members in interactions with forensic mental health inpatients. The study included 32 forensic mental health staffmembers, used 307 hours of participant observations, 48 informal interviews, and seven formal semistructured nterviews. Outcomes identify four themes concerning...... the conveyance of power to, from, and between forensic mental health staff and patients as they interact: (a) “the informal use: the human-to-human approach,” characterized by an informal use of humor and without any reference tomental health issues; (b) the “formal use of humor: the staff–patient approach......,” characterized as formalwith a view on the patient as mentally ill, unable to understand humor, and with the aim of using humor to prevent conflicts or negative behavior; (c) “protest against requested care: the human–patient approach,” characterized by the use of humor as a protest against requested care...

  16. Reducing Computational Overhead of Network Coding with Intrinsic Information Conveying

    DEFF Research Database (Denmark)

    Heide, Janus; Zhang, Qi; Pedersen, Morten V.

    This paper investigated the possibility of intrinsic information conveying in network coding systems. The information is embedded into the coding vector by constructing the vector based on a set of predefined rules. This information can subsequently be retrieved by any receiver. The starting point...... to the overall energy consumption, which is particular problematic for mobile battery-driven devices. In RLNC coding is performed over a FF (Finite Field). We propose to divide this field into sub fields, and let each sub field signify some information or state. In order to embed the information correctly...... the coding operations must be performed in a particular way, which we introduce. Finally we evaluate the suggested system and find that the amount of coding can be significantly reduced both at nodes that recode and decode....

  17. ANALYSIS OF NONLINEAR DYNAMIC STABILITY OF LIQUID-CONVEYING PIPES

    Institute of Scientific and Technical Information of China (English)

    张立翔; 黄文虎

    2002-01-01

    Nonlinearly dynamic stability of flexible liquid-conveying pipe in fluid structure interaction was analyzed by using modal disassembling technique. The effects of Poisson,Junction and Friction couplings in the wave-flowing-vibration system on the pipe dynamic stability were included in the analytical model constituted by four nonlinear differential equations. An analyzing example of cantilevered pipe was done to illustrate the dynamic stability characteristics of the pipe in the full coupling mechanisms, and the phase curves related to the first four modal motions were drawn. The results show that the dynamic stable characteristics of the pipe are very complicated in the complete coupling mechanisms, and the kinds of the singularity points corresponding to the various modal motions are different.

  18. PEGylated hybrid ytterbia nanoparticles as high-performance diagnostic probes for in vivo magnetic resonance and X-ray computed tomography imaging with low systemic toxicity.

    Science.gov (United States)

    Liu, Zhen; Pu, Fang; Liu, Jianhua; Jiang, Liyan; Yuan, Qinghai; Li, Zhengqiang; Ren, Jinsong; Qu, Xiaogang

    2013-05-21

    Novel nanoparticulate contrast agents with low systemic toxicity and inexpensive character have exhibited more advantages over routinely used small molecular contrast agents for the diagnosis and prognosis of disease. Herein, we designed and synthesized PEGylated hybrid ytterbia nanoparticles as high-performance nanoprobes for X-ray computed tomography (CT) imaging and magnetic resonance (MR) imaging both in vitro and in vivo. These well-defined nanoparticles were facile to prepare and cost-effective, meeting the criteria as a biomedical material. Compared with routinely used Iobitridol in clinic, our PEG-Yb2O3:Gd nanoparticles could provide much significantly enhanced contrast upon various clinical voltages ranging from 80 kVp to 140 kVp owing to the high atomic number and well-positioned K-edge energy of ytterbium. By the doping of gadolinium, our nanoparticulate contrast agent could perform perfect MR imaging simultaneously, revealing similar organ enrichment and bio-distribution with the CT imaging results. The super improvement in imaging efficiency was mainly attributed to the high content of Yb and Gd in a single nanoparticle, thus making these nanoparticles suitable for dual-modal diagnostic imaging with a low single-injection dose. In addition, detailed toxicological study in vitro and in vivo indicated that uniformly sized PEG-Yb2O3:Gd nanoparticles possessed excellent biocompatibility and revealed overall safety.

  19. A strategy to achieve efficient dual-mode luminescence in lanthanide-based magnetic hybrid nanostructure and its demonstration for the detection of latent fingerprints.

    Science.gov (United States)

    Shahi, Praveen K; Singh, Priyam; Singh, Akhilesh K; Singh, Sunil K; Rai, Shyam B; Prakash, Rajiv

    2017-04-01

    We have synthesized a novel inorganic-organic hybrid nanostructure (IOHN) composed of fluoride nanophosphor (NaGd0.78Er0.02Yb0.2F4) and β-diketones complex (Eu(DBM)3Phen). The Le Bail fitting of X-ray diffraction data suggests that the nanophoshor crystallizes in a hexagonal structure (P63/m space group). The TEM studies reveal that the nanophosphor and the IOHN both have average particle size of 6-8nm. The Eu(DBM)3Phen and NaGd0.78Er0.02Yb0.2F4 show characteristic down-shifting (DS) and up-conversion (UC) emission, under UV and NIR excitation, respectively. The IOHN comprises an excellent dual-mode optical features (DS and UC) of both the phases. Energy transfer from Er(3+) (doped in inorganic phase) to Eu(3+) (coordinated in organic phase) clearly demonstrates for a viable coupling between both the phases. IOHN material was found to be unique for the visualization of latent fingermarks. Because of ultrafine particle size the surface to volume ratio is relatively higher which improves the attachment of particles with the fingermarks. On the other hand, the strong paramagnetic property helps to remove excess material with magnetic wand easily. These properties provide an opportunity to probe even very weak fingermarks. Notwithstanding this, the dual-mode emission is useful for the visualization of latent fingermarks on multi-color surfaces as well.

  20. Thermal conductivity and viscosity of hybrid nanfluids prepared with magnetic nanodiamond-cobalt oxide (ND-Co3O4 nanocomposite

    Directory of Open Access Journals (Sweden)

    L. Syam Sundar

    2016-03-01

    Full Text Available Synthesis of magnetic nanodiamond-cobalt oxide (ND-Co3O4 nanocomposite material; preparation of nanofluids and estimation of thermal properties such as thermal conductivity and viscosity has been explained experimentally in this paper. The nanocomposite material has been synthesized by using in-situ growth technique and chemical coprecipitation between cobalt chloride and sodium borohydrate. The various techniques such as XRD, TEM, XPS and VSM have been used to confirm the ND and Co3O4 phase of synthesized nanocomposite. The hybrid nanofluids have been prepared by dispersing synthesized ND-Co3O4 nanocomposite in water, ethylene glycol/water mixtures. The thermal properties such as thermal conductivity and viscosity have been measured experimentally at different weight concentrations and temperatures. The results reveal that the thermal conductivity enhancements are about 16%, 9%, 14%, 11% and 10% for water, EG, 20:80%, 40:60%, and 60:40% EG/W based nanofluids at 0.15 wt% concentrations and at 60 °C respectively. Similarly the viscosity enhancements are about 1.45-times, 1.46-times, 1.15-times, 1.19-times, and 1.51-times for water, EG, 20:80%, 40:60%, and 60:40% EG/W based nanofluids at 0.15 wt% concentrations and at 60 °C respectively. Based on the experimental data new correlations for thermal conductivity and viscosity have been developed.

  1. A Fuzzy Logic Global Power Management Strategy for Hybrid Electric Vehicles Based on a Permanent Magnet Electric Variable Transmission

    Directory of Open Access Journals (Sweden)

    Shumei Cui

    2012-04-01

    Full Text Available The major contribution of this paper is to propose a Fuzzy Logic Global Power Management Strategy for Hybrid Electric Vehicles (HEVs that are driven by the PM-EVT (PM machine—Electric Variable Transmission powertrain, such that the PM-EVT will have superior advantages over other types of powertrains, including the current Toyota Prius powertrain for series-parallel HEVs. This has been investigated throughout three aspects. The first is the optimum power splitting between the Internal Combustion Engine (ICE and the PM-EVT. The second is maximizing the vehicle’s energy capture during the braking process. Finally, sustaining the State of Charge (SOC of the battery is adopted by a robust ON/OFF controller of the ICE. These goals have been accomplished by developing three fuzzy logic (FL controllers. The FL controllers are designed based on the state of charge of the battery, vehicle’s velocity, traction torque, and the vehicle’s requested power. The integration of the studied system is accomplished via the Energetic Macroscopic Representation (EMR simulation model strategy based on the software Matlab/Simulink. The PM-EVT based HEV system with the proposed power management strategy is validated by comparing to the Toyota Prius HEV. The vehicle’s performances have been analyzed throughout a combined long-trip driving cycle that represents the normal and the worst operating conditions. The simulation results show that global control system is effective to control the engine’s operating points within the highest efficiency region, exploiting of EVT machines for capturing maximum braking energy, as well as to sustain the SOC of the battery while satisfy the drive ability. The proposed control strategy for the studied HEVs sounds interesting and feasible as supported by a large amount of simulation results.

  2. MAGNET

    CERN Multimedia

    Benoit Curé

    2013-01-01

    Maintenance work and consolidation activities on the magnet cryogenics and its power distribution are progressing according to the schedules. The manufacturing of the two new helium compressor frame units has started. The frame units support the valves, all the sensors and the compressors with their motors. This activity is subcontracted. The final installation and the commissioning at CERN are scheduled for March–April 2014. The overhauls of existing cryogenics equipment (compressors, motors) are in progress. The reassembly of the components shall start in early 2014. The helium drier, to be installed on the high-pressure helium piping, has been ordered and will be delivered in the first trimester of 2014. The power distribution for the helium compressors in SH5 on the 3.3kV network is progressing. The 3.3kV switches, between each compressor and its hot spare compressor, are being installed, together with the power cables for the new compressors. The 3.3kV electrical switchboards in SE5 will ...

  3. MAGNET

    CERN Multimedia

    Benoit Curé

    The cooling down to the nominal temperature of 4.5 K was achieved at the beginning of August, in conjunction with the completion of the installation work of the connection between the power lines and the coil current leads. The temperature gradient on the first exchanger of the cold box is now kept within the nominal range. A leak of lubricant on a gasket of the helium compressor station installed at the surface was observed and several corrective actions were necessary to bring the situation back to normal. The compressor had to be refilled with lubricant and a regeneration of the filters and adsorbers was necessary. The coil cool down was resumed successfully, and the cryogenics is running since then with all parameters being nominal. Preliminary tests of the 20kA coil power supply were done earlier at full current through the discharge lines into the dump resistors, and with the powering busbars from USC5 to UXC5 without the magnet connected. On Monday evening August 25th, at 8pm, the final commissionin...

  4. MAGNET

    CERN Multimedia

    B. Curé

    The first phase of the commissioning ended in August by a triggered fast dump at 3T. All parameters were nominal, and the temperature recovery down to 4.5K was carried out in two days by the cryogenics. In September, series of ramps were achieved up to 3 and finally 3.8T, while checking thoroughly the detectors in the forward region, measuring any movement of and around the HF. After the incident of the LHC accelerator on September 19th, corrective actions could be undertaken in the forward region. When all these displacements were fully characterized and repetitive, with no sign of increments in displacement at each field ramp, it was possible to start the CRAFT, Cosmic Run at Four Tesla (which was in fact at 3.8T). The magnet was ramped up to 18.16kA and the 3 week run went smoothly, with only 4 interruptions: due to the VIP visits on 21st October during the LHC inauguration day; a water leak on the cooling demineralized water circuit, about 1 l/min, that triggered a stop of the cooling pumps, and resulte...

  5. Magnetic

    Science.gov (United States)

    Aboud, Essam; El-Masry, Nabil; Qaddah, Atef; Alqahtani, Faisal; Moufti, Mohammed R. H.

    2015-06-01

    The Rahat volcanic field represents one of the widely distributed Cenozoic volcanic fields across the western regions of the Arabian Peninsula. Its human significance stems from the fact that its northern fringes, where the historical eruption of 1256 A.D. took place, are very close to the holy city of Al-Madinah Al-Monawarah. In the present work, we analyzed aeromagnetic data from the northern part of Rahat volcanic field as well as carried out a ground gravity survey. A joint interpretation and inversion of gravity and magnetic data were used to estimate the thickness of the lava flows, delineate the subsurface structures of the study area, and estimate the depth to basement using various geophysical methods, such as Tilt Derivative, Euler Deconvolution and 2D modeling inversion. Results indicated that the thickness of the lava flows in the study area ranges between 100 m (above Sea Level) at the eastern and western boundaries of Rahat Volcanic field and getting deeper at the middle as 300-500 m. It also showed that, major structural trend is in the NW direction (Red Sea trend) with some minor trends in EW direction.

  6. EMS磁悬浮列车的零电流型永磁电磁混合磁铁设计技术研究%Design of Zero-Power Hybrid Magnet with Permanent Magnets and Electromagnets in EMS Maglev Vehicles

    Institute of Scientific and Technical Information of China (English)

    李云钢; 张晓; 程虎; 刘恒坤

    2011-01-01

    针对EMS磁悬浮列车的零电流型永磁电磁混合磁铁,研究其永磁体和电磁线圈结构参数的设计方法.永磁体安装在磁轭部位,其截面积不受磁极面积的限制,研究得出永磁体的厚度与其截面积的约束关系,并给出永磁重量最小化的设计方法.根据最大平衡安匝数要求,研究得出相对于纯电磁铁,混合磁铁的电磁线圈匝数可减半.由于混合磁铁的可控性能低于纯电磁铁,基于可控性要求,给出修正永磁体的结构参数的方法.最后给出一个实例,将1t负载悬浮在8mm间隙内,所需永磁体仅为6.4 kg.%To design the zero-power hybrid magnet with permanent magnets and electromagnets for EMS maglev vehicles, the structural parameters of its permanent magnets and electromagnets were researched on. The permanent magnet was located at die middte of the yoke, which made its sectional area independent from the area of the pole. The restriction between the thickness and the area of the permanent magnet was presented, and the method of designing the permanent magnet with minimum mass was given. According to the requirements of the maximum balance ampere-turn, it was concluded that the ampere-turn of the hybrid magnet can be reduced to half of that of the pure electromagnet. It was shown that the controllability of the hybrid magnet is always weaker than that of the pure electromagnet, and then a revision of the design for the permanent magnet was proposed based on the requirement of the controllability. Finally, a design example of the hybrid magnet was presented with 11 load suspending at 8 mm, and the mass of the permanent magnet was only 6.4 kg.

  7. A Hybrid DE-RGSO-ELM for Brain Tumor Tissue Categorization in 3D Magnetic Resonance Images

    Directory of Open Access Journals (Sweden)

    K. Kothavari

    2014-01-01

    Full Text Available Medical diagnostics, a technique used for visualizing the internal structures and functions of human body, serves as a scientific tool to assist physicians and involves direct use of digital imaging system analysis. In this scenario, identification of brain tumors is complex in the diagnostic process. Magnetic resonance imaging (MRI technique is noted to best assist tissue contrast for anatomical details and also carries out mechanisms for investigating the brain by functional imaging in tumor predictions. Considering 3D MRI model, analyzing the anatomy features and tissue characteristics of brain tumor is complex in nature. Henceforth, in this work, feature extraction is carried out by computing 3D gray-level cooccurence matrix (3D GLCM and run-length matrix (RLM and feature subselection for dimensionality reduction is performed with basic differential evolution (DE algorithm. Classification is performed using proposed extreme learning machine (ELM, with refined group search optimizer (RGSO technique, to select the best parameters for better simplification and training of the classifier for brain tissue and tumor characterization as white matter (WM, gray matter (GM, cerebrospinal fluid (CSF, and tumor. Extreme learning machine outperforms the standard binary linear SVM and BPN for medical image classifier and proves better in classifying healthy and tumor tissues. The comparison between the algorithms proves that the mean and standard deviation produced by volumetric feature extraction analysis are higher than the other approaches. The proposed work is designed for pathological brain tumor classification and for 3D MRI tumor image segmentation. The proposed approaches are applied for real time datasets and benchmark datasets taken from dataset repositories.

  8. Humor: Power Conveying Social Structures Inside Forensic Mental Health Nursing.

    Science.gov (United States)

    Gildberg, Frederik A; Paaske, Kristian J; Rasmussen, Vivian L; Nissen, Ricko D; Bradley, Stephen K; Hounsgaard, Lise

    2016-01-01

    According to research literature, humor inside the staff-patient interaction seems to be significant in the area of forensic mental healthcare. However, existing literature on the subject is limited. Therefore, the aim of this study was to explore the characteristics of the use humor by forensic mental health staff members in interactions with forensic mental health inpatients. The study included 32 forensic mental health staff members, used 307 hours of participant observations, 48 informal interviews, and seven formal semistructured interviews. Outcomes identify four themes concerning the conveyance of power to, from, and between forensic mental health staff and patients as they interact: (a) "the informal use: the human-to-human approach," characterized by an informal use of humor and without any reference to mental health issues; (b) the "formal use of humor: the staff-patient approach," characterized as formal with a view on the patient as mentally ill, unable to understand humor, and with the aim of using humor to prevent conflicts or negative behavior; (c) "protest against requested care: the human-patient approach," characterized by the use of humor as a protest against requested care; and the use of (d) "inadequacy humor: the staff-human approach," characterized by the use of inadequacy-humor referring to, for example, patients' physical features. Recommendations and clinical implications are discussed.

  9. Influence of gravity on flutter of cantilevered pipes conveying fluid

    Science.gov (United States)

    Rivero, Javier; Perez-Saborid, Miguel

    2012-11-01

    We have considered the dynamics of the nonlinear interaction between a flexible pipe and the conveyed fluid in the presence of gravity. The stability of the system (fllutter and buckling) depends on parameters such as the dimensionless fluid flow rate, the gravity to bending stiffness ratio and the fluid to pipe mass ratio and it has been studied in detail both numerically and experimentally. It has also been found that the stabilizing or destabilizing effects of fluid flow depends crucially on the direction of gravity respect to the undeformed midline of the pipe. We have also computed the post-critical behavior of the system by solving the full nonlinear equations of the problem and analyzed the transfer of energy within the system in the nonlinear regime. We have formulated the problem in terms of the angles of the midline of the pipe instead of its transverse displacements, so that we can deal with large deflections without recurring to the quasi-linear approximations concerning the pipe curvature usually made in the literature. Supported by the Ministerio de Educación, Cultura y Deportes of Spain under grant DPI 2010-20450 C03-02.

  10. Genomic disorders: molecular mechanisms for rearrangements and conveyed phenotypes.

    Directory of Open Access Journals (Sweden)

    James R Lupski

    2005-12-01

    Full Text Available Rearrangements of our genome can be responsible for inherited as well as sporadic traits. The analyses of chromosome breakpoints in the proximal short arm of Chromosome 17 (17p reveal nonallelic homologous recombination (NAHR as a major mechanism for recurrent rearrangements whereas nonhomologous end-joining (NHEJ can be responsible for many of the nonrecurrent rearrangements. Genome architectural features consisting of low-copy repeats (LCRs, or segmental duplications, can stimulate and mediate NAHR, and there are hotspots for the crossovers within the LCRs. Rearrangements introduce variation into our genome for selection to act upon and as such serve an evolutionary function analogous to base pair changes. Genomic rearrangements may cause Mendelian diseases, produce complex traits such as behaviors, or represent benign polymorphic changes. The mechanisms by which rearrangements convey phenotypes are diverse and include gene dosage, gene interruption, generation of a fusion gene, position effects, unmasking of recessive coding region mutations (single nucleotide polymorphisms, SNPs, in coding DNA or other functional SNPs, and perhaps by effects on transvection.

  11. Conveying misinformation: Top-ranked Japanese books on tobacco

    Directory of Open Access Journals (Sweden)

    Malone Ruth E

    2011-01-01

    Full Text Available Abstract Background Tobacco control efforts in Japan have lagged other high income countries, possibly because the Japanese government partially owns Japan Tobacco, Inc. In Japan, tobacco use is still often regarded as an issue of manners rather than an issue of health. Information about tobacco is available, but may not always be accurate. We explored what information Japanese consumers might access by reading popular Japanese books about tobacco. Methods We searched Amazon.com Japan using the term "Tobacco", identifying the top 12 books by "relevance" and "bestselling." We eliminated duplicates and books not concerned with tobacco use and classified the remaining books as pro-smoking, anti-smoking, or neutral. We reviewed the pro-smoking books, published 2004-2009, and analyzed examples of misinformation by theme. Results Pro-smoking popular books conveyed five types of misinformation: doubt about science; suggestions that smoking increased health, longevity, virility, etc.; trivializing tobacco's effects; attacking public health advocates/authorities; and linking tobacco use with authenticity, history, or civil rights. At least one book was authored by a former Japan Tobacco employee; another used a popular Japan Tobacco advertising phrase. Conclusions Creating doubt and confusion about tobacco serves tobacco industry interests and re-creates a strategy developed by US tobacco interests more than 40 years ago. Japanese readers may be misled by texts such as those reviewed. Tobacco control and public health advocates in Japan and globally should expose and counter such misinformation. "Naming and shaming" may be effective.

  12. Hybrid approaches to magnetic resonance thermometry using the proton resonance frequency shift and the spin-lattice relaxation time T1

    Science.gov (United States)

    Diakite, Mahamadou

    Minimally invasive thermal therapy under Magnetic Resonance Imaging (MRI) guidance is becoming popular with several applications in the process of getting FDA approval. The ability to determine in near real-time the temperature map of a tumor and its surrounding tissue makes MR thermometry very attractive and well suited for thermal treatment. The proton resonance frequency shift (PRF) is currently the gold standard method for temperature monitoring using MRI. However, its incapacity to measure temperature in fatty tissue limits the scope of its applicability. The spin lattice relaxation time T1, on the other hand, has shown good temperature sensitivity and works well in all types of tissues. In this dissertation, we have addressed a number of challenges currently affecting MRI thermometry. A non-CPMG Turbo Spin Echo (TSE) sequence has been implemented to monitor the temperature rise due to the high RF power deposition inherent to this sequence at high field (3T and higher). This new implementation allows TSE sequences to be used safely without altering their high contrast properties which make them appealing in clinical settings. Tissue damage assessment during thermal therapy is critical for the safety of the patient. We have developed a new hybrid PRF-T1 sequence that has the capability to provide simultaneously in near real-time the temperature map and T1 information, which is a good indication of the state of the tissue. The simplicity and the real-time capability of the newly developed sequence make it an ideal tool for tissue damage assessment. Temperature monitoring during thermal therapy in organs with large fat content have been hindered by the lack of an MRI thermometry method that can provide simultaneous temperature in fat and aqueous tissue. A new sequence and acquisition scheme have been developed to address this issue. In sum, this dissertation proposed several pulse sequence implementation techniques and an acquisition scheme to overcome some of

  13. Centralized Gap Clearance Control for Maglev Based Steel-Plate Conveyance System

    Directory of Open Access Journals (Sweden)

    GUNEY, O. F.

    2017-08-01

    Full Text Available The conveyance of steel-plates is one of the potential uses of the magnetic levitation technology in industry. However, the electromagnetic levitation systems inherently show nonlinear feature and are unstable without an active control. Well-known U-shaped or E-shaped electromagnets cannot provide redundant levitation with multiple degrees of freedom. In this paper, to achieve the full redundant levitation of the steel plate, a quadruple configuration of U shaped electromagnets has been proposed. To resolve the issue of instability and attain more robust levitation, a centralized control algorithm based on a modified PID controller (I PD is designed for each degree of freedom by using the Manabe canonical polynomial technique. The model of the system is carried out using electromechanical energy conversion princi¬ples and verified by 3-D FEM analysis. An experimental bench is built up to test the system performance under trajectory tracking and external disturbance excitation. The results confirm the effectiveness of the proposed system and the control approach to obtain a full redundant levitation even in case of disturbances. The paper demonstrates the feasibility of the con¬veyance of steel plates by using the quadruple configuration of U-shaped electromagnets and shows the merits of I-PD controller both in stabilization and increased robust levitation.

  14. 9 CFR 50.13 - Disinfection of premises, conveyances, and materials.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Disinfection of premises, conveyances... ANIMALS DESTROYED BECAUSE OF TUBERCULOSIS General Indemnity § 50.13 Disinfection of premises, conveyances... for disinfection to 30 days when request for such extension is received by him prior to the expiration...

  15. 9 CFR 53.7 - Disinfection of premises, conveyances, and materials.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Disinfection of premises, conveyances... LIVESTOCK OR POULTRY § 53.7 Disinfection of premises, conveyances, and materials. All premises, including... disinfection shall be shared according to the agreement reached under § 53.2 with the State in which the work...

  16. 9 CFR 52.7 - Disinfection of premises, conveyances, and materials.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Disinfection of premises, conveyances... SWINE DESTROYED BECAUSE OF PSEUDORABIES § 52.7 Disinfection of premises, conveyances, and materials. All... cleaning and disinfection, unless an official pseudorabies epidemiologist determines that a shorter or...

  17. 76 FR 61779 - Agency Information Collection (Application for Automobile or Other Conveyance and Adaptive...

    Science.gov (United States)

    2011-10-05

    ... AFFAIRS Agency Information Collection (Application for Automobile or Other Conveyance and Adaptive... refer to ``OMB Control No. 2900-0067.'' SUPPLEMENTARY INFORMATION: Title: Application for Automobile or..., servicepersons and their survivors complete VA Form 21-4502 to apply for automobile or other conveyance...

  18. 48 CFR 1227.305-4 - Conveyance of invention rights acquired by the Government.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Conveyance of invention... Under Government Contracts 1227.305-4 Conveyance of invention rights acquired by the Government... inventions made in the course of contract performance and at contract completion. This requirement may be...

  19. 48 CFR 3027.305-4 - Conveyance of invention rights acquired by the Government.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Conveyance of invention... PATENTS, DATA, AND COPYRIGHTS Patent Rights under Government Contracts 3027.305-4 Conveyance of invention... which include a patent rights clause include a means for the contractor to report inventions made in the...

  20. 48 CFR 3053.227-70 - Conveyance of invention rights acquired by the Government.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Conveyance of invention... Prescription of Forms 3053.227-70 Conveyance of invention rights acquired by the Government. The following form is prescribed for including a means for contractors to report inventions made in the course of...

  1. 28 CFR 0.69b - Delegation of authority respecting conveyances for public airports.

    Science.gov (United States)

    2010-07-01

    ... conveyances for public airports. 0.69b Section 0.69b Judicial Administration DEPARTMENT OF JUSTICE... authority respecting conveyances for public airports. The Assistant Attorney General in charge of the...(b) of The Airport and Airway Improvement Act of 1982 (96 Stat. 671, 692) with respect to...

  2. The Sound of Motion in Spoken Language: Visual Information Conveyed by Acoustic Properties of Speech

    Science.gov (United States)

    Shintel, Hadas; Nusbaum, Howard C.

    2007-01-01

    Language is generally viewed as conveying information through symbols whose form is arbitrarily related to their meaning. This arbitrary relation is often assumed to also characterize the mental representations underlying language comprehension. We explore the idea that visuo-spatial information can be analogically conveyed through acoustic…

  3. 27 CFR 24.91 - Conveyance of untaxpaid wine or spirits.

    Science.gov (United States)

    2010-04-01

    ... wine or spirits. 24.91 Section 24.91 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Administrative and Miscellaneous Provisions Conveyance of Wine Or Spirits on Wine Premises § 24.91 Conveyance of untaxpaid wine or spirits....

  4. 7 CFR 1955.10 - Voluntary conveyance of real property by the borrower to the Government.

    Science.gov (United States)

    2010-01-01

    ... will submit the voluntary conveyance offer, the case file and a narrative report to the appropriate... on present income and potential earning ability. Exception for SFH loans: FmHA or its successor... with the effective date being the date the voluntary conveyance is closed. If an oral lease is in...

  5. 9 CFR 73.11 - Treatment of means of conveyance and premises having contained scabby cattle.

    Science.gov (United States)

    2010-01-01

    ... premises having contained scabby cattle. 73.11 Section 73.11 Animals and Animal Products ANIMAL AND PLANT... POULTRY) AND ANIMAL PRODUCTS SCABIES IN CATTLE § 73.11 Treatment of means of conveyance and premises having contained scabby cattle. Means of conveyance, yards, pens, sheds, chutes, or other premises...

  6. 78 FR 40168 - Notice of Realty Action: Classification for Lease and Subsequent Conveyance for Recreation and...

    Science.gov (United States)

    2013-07-03

    ...: 14X5232] Notice of Realty Action: Classification for Lease and Subsequent Conveyance for Recreation and... suitable for classification for lease and subsequent conveyance under the provisions of the Recreation and...: Interested parties may submit written comments regarding the proposed classification of the land for...

  7. 75 FR 26790 - Notice of Realty Action: Classification for Lease and Subsequent Conveyance for the Recreation...

    Science.gov (United States)

    2010-05-12

    ...: Classification for Lease and Subsequent Conveyance for the Recreation and Public Purposes Act of Public Lands in...: The Bureau of Land Management (BLM) has examined and found suitable for classification for lease and...: Interested parties may submit written comments regarding the proposed lease/conveyance or classification...

  8. 78 FR 75577 - Notice of Realty Action: Recreation and Public Purposes Act Classification; Lease and Conveyance...

    Science.gov (United States)

    2013-12-12

    ... found suitable for classification for lease and/or conveyance to the City of Las Cruces under the... Bureau of Land Management Notice of Realty Action: Recreation and Public Purposes Act Classification; Lease and Conveyance of Public Land, Do a Ana County, NM AGENCY: Bureau of Land Management,...

  9. 75 FR 28282 - Notice of Realty Action; Recreation and Public Purposes Act Classification; Lease and Conveyance...

    Science.gov (United States)

    2010-05-20

    ... written comments regarding the proposed classification and lease or conveyance of this public land on or... will not be available for lease or conveyance until after the classification becomes effective... Bureau of Land Management Notice of Realty Action; Recreation and Public Purposes Act...

  10. Hybrid photon detectors

    CERN Document Server

    D'Ambrosio, C

    2003-01-01

    Hybrid photon detectors detect light via vacuum photocathodes and accelerate the emitted photoelectrons by an electric field towards inversely polarized silicon anodes, where they are absorbed, thus producing electron-hole pairs. These, in turn, are collected and generate electronic signals on their ohmic contacts. This review first describes the characteristic properties of the main components of hybrid photon detectors: light entrance windows, photocathodes, and silicon anodes. Then, essential relations describing the trajectories of photoelectrons in electric and magnetic fields and their backscattering from the silicon anodes are derived. Depending on their anode configurations, three families of hybrid photon detectors are presented: hybrid photomultiplier tubes with single anodes for photon counting with high sensitivity and for gamma spectroscopy; multi-anode photon detector tubes with anodes subdivided into square or hexagonal pads for position-sensitive photon detection; imaging silicon pixel array t...

  11. Hybrid Baryons

    CERN Document Server

    Page, P R

    2003-01-01

    We review the status of hybrid baryons. The only known way to study hybrids rigorously is via excited adiabatic potentials. Hybrids can be modelled by both the bag and flux-tube models. The low-lying hybrid baryon is N 1/2^+ with a mass of 1.5-1.8 GeV. Hybrid baryons can be produced in the glue-rich processes of diffractive gamma N and pi N production, Psi decays and p pbar annihilation.

  12. Synthesis of water-dispersible poly-l-lysine-functionalized magnetic Fe3O4-(GO-MWCNTs) nanocomposite hybrid with a large surface area for high-efficiency removal of tartrazine and Pb(II).

    Science.gov (United States)

    Hu, Dan; Wan, Xiaodong; Li, Xiaohui; Liu, Jianguo; Zhou, Chunhua

    2017-03-07

    In this study, a novel, effective and environment-friendly methods was used to prepare poly-l-lysine (PLL)-functionalized magnetic Fe3O4-(GO-MWCNTs) hybrid composite with large surface area and abundant hydroxyl and amino groups. The as-prepared PLL-Fe3O4-(GO-MWCNTs) nanocomposite was systematically characterized by FT-IR, XRD, TGA, SEM, TEM, VSM and EDX. The PLL-Fe3O4-(GO-MWCNTs) hybrid composite exhibited excellent adsorption performance for the removal of a dye (tartrazine) and a heave metal (Pb(II)). The result showed that adsorption of Pb(II) reached equilibrium in 30min and adsorption of tartrazine reached equilibrium in approximately 60min. Most importantly, PLL-Fe3O4-(GO-MWCNTs) hybrid possesses high adsorption capacity, rapid separation, and less time-consuming. The equilibrium adsorption capacity was 1038.42mgg(-1) for Pb(II) and 775.19mgg(-1) for tartrazine under the optimal conditions. These two pollutants removal were found to obey Langmuir adsorption model, while the kinetics of adsorption followed pseudo-second-order kinetic model. A possible adsorption mechanism has been proposed where the chelation between PLL and Pb(II) or electrostatic interaction between GO and tartrazine. These results demonstrated the potential applications of PLL-Fe3O4-(GO-MWCNTs) hybrid composite in deep-purification of polluted water. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. CENTRAL CONVEYING & AUTO FEEDING SYSTEMS FOR AN INJECTION MOLDING SHOP

    Directory of Open Access Journals (Sweden)

    Sanjeev Kumar

    2011-08-01

    Full Text Available Nowadays injection molding is probably the most important method of Processing of consumer and industrial goods, and is performed everywhere in the world. The developing of injection molding becomes a competition from day to day. This Process now integrated with computer control make the production better in quality and Better quantity. The trends of producing a plastics product in injection molding industries are recently changing from traditional method to using the FEA analysis. For injection molding industries, time and cost is very important aspects to consider because these two aspectswill directly related to the profits at a company. The next issue toconsider, to get the best parameter for the injection molding process, plastics has been waste. Through the experiment, operator will use large amount of plastics material to get the possibly parameters to setup the machine.To produce the parts with better quality and quantity these molding defects are the major obstacles in achieving the targets with quality & quantity. Various defects like Short shot, colour streaks and low productivity rates are associated with the material mixing and feeding as molded plastics are often a blend of two or more materials. Colors (master batch and other additives are often mixed (blended with the raw plastic material prior to the molding process in molding plants. So it is very necessary to work out auto blending and auto feeding of plasticgranules to the machine hopper. This paper will cover the studyof automatic blending unit & central conveying system for plasticgranule feeding to machine & will help in optimizing the injection molding process.

  14. Study of electric and magnetic field fluctuations from lower hybrid drift instability waves in the terrestrial magnetotail with the fully kinetic, semi-implicit, adaptive multi level multi domain method

    Science.gov (United States)

    Innocenti, M. E.; Norgren, C.; Newman, D.; Goldman, M.; Markidis, S.; Lapenta, G.

    2016-05-01

    The newly developed fully kinetic, semi-implicit, adaptive multi-level multi-domain (MLMD) method is used to simulate, at realistic mass ratio, the development of the lower hybrid drift instability (LHDI) in the terrestrial magnetotail over a large wavenumber range and at a low computational cost. The power spectra of the perpendicular electric field and of the fluctuations of the parallel magnetic field are studied at wavenumbers and times that allow to appreciate the onset of the electrostatic and electromagnetic LHDI branches and of the kink instability. The coupling between electric and magnetic field fluctuations observed by Norgren et al. ["Lower hybrid drift waves: Space observations," Phys. Rev. Lett. 109, 055001 (2012)] for high wavenumber LHDI waves in the terrestrial magnetotail is verified. In the MLMD simulations presented, a domain ("coarse grid") is simulated with low resolution. A small fraction of the entire domain is then simulated with higher resolution also ("refined grid") to capture smaller scale, higher frequency processes. Initially, the MLMD method is validated for LHDI simulations. MLMD simulations with different levels of grid refinement are validated against the standard semi-implicit particle in cell simulations of domains corresponding to both the coarse and the refined grid. Precious information regarding the applicability of the MLMD method to turbulence simulations is derived. The power spectra of MLMD simulations done with different levels of refinements are then compared. They consistently show a break in the magnetic field spectra at k⊥di˜30 , with di the ion skin depth and k⊥ the perpendicular wavenumber. The break is observed at early simulated times, Ωcit <6 , with Ωci the ion cyclotron frequency. It is due to the initial decoupling of electric and magnetic field fluctuations at intermediate and low wavenumbers, before the development of the electromagnetic LHDI branch. Evidence of coupling between electric and magnetic

  15. Fluid-structure interaction for nonlinear response of shells conveying pulsatile flow

    Science.gov (United States)

    Tubaldi, Eleonora; Amabili, Marco; Païdoussis, Michael P.

    2016-06-01

    Circular cylindrical shells with flexible boundary conditions conveying pulsatile flow and subjected to pulsatile pressure are investigated. The equations of motion are obtained based on the nonlinear Novozhilov shell theory via Lagrangian approach. The flow is set in motion by a pulsatile pressure gradient. The fluid is modeled as a Newtonian pulsatile flow and it is formulated using a hybrid model that contains the unsteady effects obtained from the linear potential flow theory and the pulsatile viscous effects obtained from the unsteady time-averaged Navier-Stokes equations. A numerical bifurcation analysis employs a refined reduced order model to investigate the dynamic behavior. The case of shells containing quiescent fluid subjected to the action of a pulsatile transmural pressure is also addressed. Geometrically nonlinear vibration response to pulsatile flow and transmural pressure are here presented via frequency-response curves and time histories. The vibrations involving both a driven mode and a companion mode, which appear due to the axial symmetry, are also investigated. This theoretical framework represents a pioneering study that could be of great interest for biomedical applications. In particular, in the future, a more refined model of the one here presented will possibly be applied to reproduce the dynamic behavior of vascular prostheses used for repairing and replacing damaged and diseased thoracic aorta in cases of aneurysm, dissection or coarctation. For this purpose, a pulsatile time-dependent blood flow model is here considered by applying physiological waveforms of velocity and pressure during the heart beating period. This study provides, for the first time in literature, a fully coupled fluid-structure interaction model with deep insights in the nonlinear vibrations of circular cylindrical shells subjected to pulsatile pressure and pulsatile flow.

  16. 3-D Hybrid Kinetic Modeling of the Interaction Between the Solar Wind and Lunar-like Exospheric Pickup Ions in Case of Oblique/ Quasi-Parallel/Parallel Upstream Magnetic Field

    Science.gov (United States)

    Lipatov, A. S.; Farrell, W. M.; Cooper, J. F.; Sittler, E. C., Jr.; Hartle, R. E.

    2015-01-01

    The interactions between the solar wind and Moon-sized objects are determined by a set of the solar wind parameters and plasma environment of the space objects. The orientation of upstream magnetic field is one of the key factors which determines the formation and structure of bow shock wave/Mach cone or Alfven wing near the obstacle. The study of effects of the direction of the upstream magnetic field on lunar-like plasma environment is the main subject of our investigation in this paper. Photoionization, electron-impact ionization and charge exchange are included in our hybrid model. The computational model includes the self-consistent dynamics of the light (hydrogen (+), helium (+)) and heavy (sodium (+)) pickup ions. The lunar interior is considered as a weakly conducting body. Our previous 2013 lunar work, as reported in this journal, found formation of a triple structure of the Mach cone near the Moon in the case of perpendicular upstream magnetic field. Further advances in modeling now reveal the presence of strong wave activity in the upstream solar wind and plasma wake in the cases of quasiparallel and parallel upstream magnetic fields. However, little wave activity is found for the opposite case with a perpendicular upstream magnetic field. The modeling does not show a formation of the Mach cone in the case of theta(Sub B,U) approximately equal to 0 degrees.

  17. Nanochemistry and magnetism

    Science.gov (United States)

    Buchachenko, A. L.

    2009-10-01

    An analysis of magnetism of nanochemical systems opens up new ways to creating ferromagnets from diamagnetic substances and new principles for constructing molecular ferromagnets, hybrid magnetic materials, and monomolecular magnets on the basis of high-spin molecules and complexes. Their use in spin computing is considered.

  18. Magnetic Bearing

    Science.gov (United States)

    1996-01-01

    AVCON, Inc. produces advanced magnetic bearing systems for industrial use, offering a unique technological approach based on contract work done at Marshall Space Flight Center and Lewis Research Center. Designed for the turbopump of the Space Shuttle main engine, they are now used in applications such as electric power generation, petroleum refining, machine tool operation and natural gas pipelines. Magnetic bearings support moving machinery without physical contact; AVCON's homopolar approach is a hybrid of permanent and electromagnets which are one-third the weight, smaller and more power- efficient than previous magnetic bearings.

  19. Conveying Lava Flow Hazards Through Interactive Computer Models

    Science.gov (United States)

    Thomas, D.; Edwards, H. K.; Harnish, E. P.

    2007-12-01

    As part of an Information Sciences senior class project, a software package of an interactive version of the FLOWGO model was developed for the Island of Hawaii. The software is intended for use in an ongoing public outreach and hazards awareness program that educates the public about lava flow hazards on the island. The design parameters for the model allow an unsophisticated user to initiate a lava flow anywhere on the island and allow it to flow down-slope to the shoreline while displaying a timer to show the rate of advance of the flow. The user is also able to modify a range of input parameters including eruption rate, the temperature of the lava at the vent, and crystal fraction present in the lava at the source. The flow trajectories are computed using a 30 m digital elevation model for the island and the rate of advance of the flow is estimated using the average slope angle and the computed viscosity of the lava as it cools in either a channel (high heat loss) or lava tube (low heat loss). Even though the FLOWGO model is not intended to, and cannot, accurately predict the rate of advance of a tube- fed or channel-fed flow, the relative rates of flow advance for steep or flat-lying terrain convey critically important hazard information to the public: communities located on the steeply sloping western flanks of Mauna Loa may have no more than a few hours to evacuate in the face of a threatened flow from Mauna Loa's southwest rift whereas communities on the more gently sloping eastern flanks of Mauna Loa and Kilauea may have weeks to months to prepare for evacuation. Further, the model also can show the effects of loss of critical infrastructure with consequent impacts on access into and out of communities, loss of electrical supply, and communications as a result of lava flow implacement. The interactive model has been well received in an outreach setting and typically generates greater involvement by the participants than has been the case with static maps

  20. 耦合高压斯特林制冷效应的复合磁制冷循环的数值模拟∗%Numerical simulation of a hybrid magnetic refrigeration combined with high pressure Stirling regenerative refrigeration effect

    Institute of Scientific and Technical Information of China (English)

    高新强; 沈俊; 和晓楠; 唐成春; 戴巍; 李珂; 公茂琼; 吴剑峰

    2015-01-01

    Magnetic refrigeration is a cooling method based on the magnetocaloric effect, which uses solid magnetocaloric materials as refrigerant, and helium, water or other fluid as heat transfer fluids. Stirling refrigeration is a kind of mature gas regenerative cooling method, using helium gas as the refrigerant. These refrigerations have similar cycling charac-teristics, and are both safe, environmantal-friendly and high efficient cooling methods. Therefore, a hybrid magnetic refrigerator combined with Stirling gas refrigeration effect is proposed and designed. In our previous works for hybrid magnetic refrigeration, numerical simulation and experimental performance of the low-pressure hybrid magnetic refrig-erator was carried out, and the cycling mechanism of hybrid magnetic refrigeration was also figured out. In this study, a numerical model for the high-pressure hybrid magnetic refrigeration cycle is established. The magnetic refrigeration materials are utilized as the regenerator matrix for both gas Stirling and active magnetic regenerative refrigeration in this model. Effects of gas Stirling and active magnetic regenerative refrigeration are combined to build a kind of high efficient refrigeration cycle. Ansys Fluent software is applied in this paper. Based on the physical model of hybrid refrig-erator and the theories of magnetocaloric effect and numerical calculation of regenerator, computational fluid dynamics (CFD) model of high-pressure hybrid magnetic refrigerator is established. This paper describes the internal heat transfer mechanism of Stirling and magnetic refrigeration effect in an active regenerator. Some parameters of the model such as working frequency and utilization are analyzed and the best phase angle is figured out in order to couple these two cooling effects positively. Simulation results show that Stirling and magnetic cooling effects can be coupled positively at phase angle of 60◦. Results also show that with increasing system pressure

  1. RESEARCH OF DEPENDENCE OF BELT CONVEYER DRIVE POWER ON ITS DESIGN PARAMETERS

    Directory of Open Access Journals (Sweden)

    V. M. Bohomaz

    2016-02-01

    Full Text Available Purpose. A drive is one of the basic elements of belt conveyers. To determine the drive power it is necessary to conduct calculations by standard methodologies expounded in modern technical literature. Such calculations demand a fair amount of time. The basic design parameters of a belt conveyer include type of load, design efficiency, geometrical dimensions and path configuration, operation conditions. The article aims to build the parametric dependence of belt conveyer drive power on its design parameters, that takes into account standard dimensions and parameters of belts, idlers and pulleys. Methodology. The work examines a belt conveyer with two areas: sloping and horizontal. Using the methodology for pulling calculation by means of belt conveyer encirclement, there are built parametric dependences of pull forces in the characteristic conveyer path points on the type of load, design efficiency, geometrical dimensions and path configuration, operation conditions. Findings. For the belt conveyers of the considered type there are built parametric dependences of drive power on type of load, design efficiency, geometrical dimensions and path configuration, operation conditions, taking into account the belt standard dimensions and corresponding assumptions in relation to idler and pulley types. Originality.This is the first developed parametric dependence of two-area (sloping and horizontal belt conveyer drive power on type of load, design efficiency, geometrical dimensions and path configuration, operation conditions that takes into account standard dimensions and parameters of belts, idlers and pulleys. Practical value. Use of the built drive power dependences on design parameters for the belt conveyers with sloping and horizontal areas gives an opportunity of relatively rapid determination of drive power approximate value at the design stage. Also it allows quality selection of its basic elements at specific design characteristics and

  2. Antiferromagnetic order in hybrid electromagnetic metamaterials

    Science.gov (United States)

    Miroshnichenko, Andrey E.; Filonov, Dmitry; Lukyanchuk, Boris; Kivshar, Yuri

    2017-08-01

    We demonstrate experimentally a new type of order in optical magnetism resembling the staggered structure of spins in antiferromagnetic ordered materials. We study hybrid electromagnetic metasurfaces created by assembling hybrid meta-atoms formed by metallic split-ring resonators and dielectric particles with a high refractive index, both supporting optically-induced magnetic dipole resonances of different origin. Each pair (or ‘metamolecule’) is characterized by two interacting magnetic dipole moments with the distance-dependent magnetization resembling the spin exchange interaction in magnetic materials. By directly mapping the structure of the electromagnetic fields, we demonstrate experimentally that strong coupling between the optically-induced magnetic moments of different origin can flip the magnetisation orientation in a metamolecule creating an antiferromagnetic lattice of staggered optically-induced magnetic moments in hybrid metasurfaces.

  3. 78 FR 57412 - Notice of Realty Action: Recreation and Public Purposes Act Classification and Lease/Conveyance...

    Science.gov (United States)

    2013-09-18

    ... classification for lease and subsequent conveyance to the City of Durango, under the provisions of the Recreation... proposed classification for lease and subsequent conveyance until November 4, 2013. ADDRESSES: Please... classification and lease with subsequent conveyance under the provisions of the R&PP Act, as amended (43...

  4. Foveating dynamic scenes based on expert's eye movements to convey perceptual skills

    NARCIS (Netherlands)

    Jarodzka, Halszka; Balslev, Thomas; Holmqvist, Kenneth; Nyström, Marcus; Scheiter, Katharina; Gerjets, Peter; Eika, Berit

    2011-01-01

    Jarodzka, H., Balslev, T., Holmqvist, K., Scheiter, K., Nyström, M., Gerjets, P., & Eika, B. (2011, August). Foveating dynamic scenes based on expert’s eye movements to convey perceptual skills. Presentation at ECEM, Marseille, France.

  5. Foveating dynamic scenes based on expert's eye movements to convey perceptual skills

    NARCIS (Netherlands)

    Jarodzka, Halszka; Balslev, Thomas; Holmqvist, Kenneth; Nyström, Marcus; Scheiter, Katharina; Gerjets, Peter; Eika, Berit

    2011-01-01

    Jarodzka, H., Balslev, T., Holmqvist, K., Scheiter, K., Nyström, M., Gerjets, P., & Eika, B. (2011, August). Foveating dynamic scenes based on expert’s eye movements to convey perceptual skills. Presentation at ECEM, Marseille, France.

  6. Computational fluid dynamics modeling of rope-guided conveyances in two typical kinds of shaft layouts.

    Directory of Open Access Journals (Sweden)

    Renyuan Wu

    Full Text Available The behavior of rope-guided conveyances is so complicated that the rope-guided hoisting system hasn't been understood thoroughly so far. In this paper, with user-defined functions loaded, ANSYS FLUENT 14.5 was employed to simulate lateral motion of rope-guided conveyances in two typical kinds of shaft layouts. With rope-guided mine elevator and mine cages taken into account, results show that the lateral aerodynamic buffeting force is much larger than the Coriolis force, and the side aerodynamic force have the same order of magnitude as the Coriolis force. The lateral aerodynamic buffeting forces should also be considered especially when the conveyance moves along the ventilation air direction. The simulation shows that the closer size of the conveyances can weaken the transverse aerodynamic buffeting effect.

  7. Hybrid vehicles

    Energy Technology Data Exchange (ETDEWEB)

    West, J.G.W. [Electrical Machines (United Kingdom)

    1997-07-01

    The reasons for adopting hybrid vehicles result mainly from the lack of adequate range from electric vehicles at an acceptable cost. Hybrids can offer significant improvements in emissions and fuel economy. Series and parallel hybrids are compared. A combination of series and parallel operation would be the ideal. This can be obtained using a planetary gearbox as a power split device allowing a small generator to transfer power to the propulsion motor giving the effect of a CVT. It allows the engine to run at semi-constant speed giving better fuel economy and reduced emissions. Hybrid car developments are described that show the wide range of possible hybrid systems. (author)

  8. Design and evaluation of a hybrid radiofrequency applicator for magnetic resonance imaging and RF induced hyperthermia: electromagnetic field simulations up to 14.0 Tesla and proof-of-concept at 7.0 Tesla.

    Directory of Open Access Journals (Sweden)

    Lukas Winter

    Full Text Available This work demonstrates the feasibility of a hybrid radiofrequency (RF applicator that supports magnetic resonance (MR imaging and MR controlled targeted RF heating at ultrahigh magnetic fields (B0≥7.0T. For this purpose a virtual and an experimental configuration of an 8-channel transmit/receive (TX/RX hybrid RF applicator was designed. For TX/RX bow tie antenna electric dipoles were employed. Electromagnetic field simulations (EMF were performed to study RF heating versus RF wavelength (frequency range: 64 MHz (1.5T to 600 MHz (14.0T. The experimental version of the applicator was implemented at B0 = 7.0T. The applicators feasibility for targeted RF heating was evaluated in EMF simulations and in phantom studies. Temperature co-simulations were conducted in phantoms and in a human voxel model. Our results demonstrate that higher frequencies afford a reduction in the size of specific absorption rate (SAR hotspots. At 7T (298 MHz the hybrid applicator yielded a 50% iso-contour SAR (iso-SAR-50% hotspot with a diameter of 43 mm. At 600 MHz an iso-SAR-50% hotspot of 26 mm in diameter was observed. RF power deposition per RF input power was found to increase with B0 which makes targeted RF heating more efficient at higher frequencies. The applicator was capable of generating deep-seated temperature hotspots in phantoms. The feasibility of 2D steering of a SAR/temperature hotspot to a target location was demonstrated by the induction of a focal temperature increase (ΔT = 8.1 K in an off-center region of the phantom. Temperature simulations in the human brain performed at 298 MHz showed a maximum temperature increase to 48.6C for a deep-seated hotspot in the brain with a size of (19×23×32mm(3 iso-temperature-90%. The hybrid applicator provided imaging capabilities that facilitate high spatial resolution brain MRI. To conclude, this study outlines the technical underpinnings and demonstrates the basic feasibility of an 8-channel hybrid TX

  9. Design and evaluation of a hybrid radiofrequency applicator for magnetic resonance imaging and RF induced hyperthermia: electromagnetic field simulations up to 14.0 Tesla and proof-of-concept at 7.0 Tesla.

    Science.gov (United States)

    Winter, Lukas; Özerdem, Celal; Hoffmann, Werner; Santoro, Davide; Müller, Alexander; Waiczies, Helmar; Seemann, Reiner; Graessl, Andreas; Wust, Peter; Niendorf, Thoralf

    2013-01-01

    This work demonstrates the feasibility of a hybrid radiofrequency (RF) applicator that supports magnetic resonance (MR) imaging and MR controlled targeted RF heating at ultrahigh magnetic fields (B0≥7.0T). For this purpose a virtual and an experimental configuration of an 8-channel transmit/receive (TX/RX) hybrid RF applicator was designed. For TX/RX bow tie antenna electric dipoles were employed. Electromagnetic field simulations (EMF) were performed to study RF heating versus RF wavelength (frequency range: 64 MHz (1.5T) to 600 MHz (14.0T)). The experimental version of the applicator was implemented at B0 = 7.0T. The applicators feasibility for targeted RF heating was evaluated in EMF simulations and in phantom studies. Temperature co-simulations were conducted in phantoms and in a human voxel model. Our results demonstrate that higher frequencies afford a reduction in the size of specific absorption rate (SAR) hotspots. At 7T (298 MHz) the hybrid applicator yielded a 50% iso-contour SAR (iso-SAR-50%) hotspot with a diameter of 43 mm. At 600 MHz an iso-SAR-50% hotspot of 26 mm in diameter was observed. RF power deposition per RF input power was found to increase with B0 which makes targeted RF heating more efficient at higher frequencies. The applicator was capable of generating deep-seated temperature hotspots in phantoms. The feasibility of 2D steering of a SAR/temperature hotspot to a target location was demonstrated by the induction of a focal temperature increase (ΔT = 8.1 K) in an off-center region of the phantom. Temperature simulations in the human brain performed at 298 MHz showed a maximum temperature increase to 48.6C for a deep-seated hotspot in the brain with a size of (19×23×32)mm(3) iso-temperature-90%. The hybrid applicator provided imaging capabilities that facilitate high spatial resolution brain MRI. To conclude, this study outlines the technical underpinnings and demonstrates the basic feasibility of an 8-channel hybrid TX

  10. Fluid control in microfluidic devices using a fluid conveyance extension and an absorbent microfluidic flow modulator.

    Science.gov (United States)

    Yuen, Po Ki

    2013-05-07

    This article presents a simple method for controlling fluid in microfluidic devices without the need for valves or pumps. A fluid conveyance extension is fluidly coupled to the enclosed outlet chamber of a microfluidic device. After a fluid is introduced into the microfluidic device and saturates the fluid conveyance extension, a fluid flow in the microfluidic device is generated by contacting an absorbent microfluidic flow modulator with the fluid conveyance extension to absorb the fluid from the fluid conveyance extension through capillary action. Since the fluid in the microfluidic device is fluidly coupled with the fluid conveyance extension and the fluid conveyance extension is fluidly coupled with the absorbent microfluidic flow modulator, the absorption rate of the absorbent microfluidic flow modulator, which is the rate at which the absorbent microfluidic flow modulator absorbs fluid, matches the fluid flow rate in the microfluidic device. Thus, the fluid flow rate in the microfluidic device is set by the absorption rate of the absorbent microfluidic flow modulator. Sheath flow and fluid switching applications are demonstrated using this simple fluid control method without the need for valves or pumps. Also, the ability to control the fluid flow rate in the microfluidic device is demonstrated using absorbent microfluidic flow modulators with various absorbent characteristics and dimensions.

  11. Braking Distance of Hoist Conveyances Required for Safe Stopping Under the Conditions of Emergency Braking

    Science.gov (United States)

    Wolny, Stanisław

    2017-06-01

    This study investigates selected aspects of the dynamic behaviour of mine hoists during the emergency braking in an event of overtravel. Characteristics of the braking force that needs to be applied in the headgear and in the pit bottom to arrest the conveyance in the event of an overtravel are derived from laboratory and industrial test data and recalling the results reported in literature. The real hoist installation is replaced by a model whereby the equations of motion of rope elements are written as for elastic strings, taking into account the variable length of the hoisting rope section between the Koepe pulley and the conveyance being arrested in the head tower. Analytical formulas are provided whereby the displacement of the top conveyance with the payload for the constant elasticity coefficient of the hoisting rope section between the conveyance being arrested in the head tower and the Koepe pulley is expressed as the function of the braking force and of the operational parameters of the hoist gear. The hoist operation is investigated in the event of emergency braking, taking into account the two aspects of the cycle: - the time required for the conveyance to be stopped, - the distance travelled by the conveyance until it is stopped. The results of the dynamic analysis of the hoist installation in the conditions of emergency braking may be utilised in selection of the effective and adequate braking system guaranteeing the safety of the system operation.

  12. Test plan for the remote conveyance and innovative end effector demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Rice, P.; Smith, A.M. [EG& G Idaho, Inc., Idaho Falls, ID (United States). Idaho National Engineering Lab.; Peterson, R.

    1994-08-01

    This test plan describes the demonstration of innovative equipment and processes specifically designed to be superior to currently employed technology for buried waste retrieval. The dumping of dry soil into a funnel/dumpster arrangement has been found to be the primary mechanism for dust generation during the retrieval of buried transuranic waste. The primary goal of the innovative end effector is to reduce dust generation and the potential spread of airborne contaminants during the dumping operation. In addition, regardless of the excavation technique, exhumed waste will have to be conveyed away from the retrieval area to a packaging area or directly to a treatment facility. The remote conveyance system is aimed at developing a remotely controlled vehicle to convey retrieved waste that will operate on variable terrain and remove workers from the hazardous zone. To demonstrate the remote conveyance system and the innovative end effector, the Buried Waste Integrated Demonstration (BWID) Program has subcontracted with RAHCO International to provide equipment and services to perform a demonstration of the technologies. The demonstration will be performed in two phases. In Phase I, the subcontractor will perform a full scale demonstration to assess the ability of the innovative end effector to control dust generation and the potential spread of contamination during dumping operations. Phase II includes performing a retrieval/conveyance demonstration. This demonstration will excavate, dump, and convey simulated waste to demonstrate the functionality of the system (e.g., maneuverability, retrieval rates, and system integration). Phase II of the demonstration will include all elements of the remote conveyance and end effector system. This test plan will describe the demonstration objectives, data quality objectives, equipment operation, and methods for collecting data during the demonstration.

  13. Transverse vibration of pipe conveying fluid made of functionally graded materials using a symplectic method

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Zhong-Min, E-mail: wangzhongm@xaut.edu.cn; Liu, Yan-Zhuang

    2016-03-15

    Highlights: • We investigate the transverse vibration of FGM pipe conveying fluid. • The FGM pipe conveying fluid can be classified into two cases. • The variations between the frequency and the power law exponent are obtained. • “Case 1” is relatively more reasonable than “case 2”. - Abstract: Problems related to the transverse vibration of pipe conveying fluid made of functionally graded material (FGM) are addressed. Based on inside and outside surface material compositions of the pipe, FGM pipe conveying fluid can be classified into two cases. It is hypothesized that the physical parameters of the material along the direction of the pipe wall thickness change in the simple power law. A differential equation of motion expressed in non-dimensional quantities is derived by using Hamilton's principle for systems of changing mass. Using the assuming modal method, the pipe deflection function is expanded into a series, in which each term is expressed to admissible function multiplied by generalized coordinate. Then, the differential equation of motion is discretized into the two order differential equations expressed in the generalized coordinates. Based on symplectic elastic theory and the introduction of dual system and dual variable, Hamilton's dual equations are derived, and the original problem is reduced to eigenvalue and eigenvector problem in the symplectic space. Finally, a symplectic method is employed to analyze the vibration and stability of FGM pipe conveying fluid. For a clamped–clamped FGM pipe conveying fluid in “case 1” and “case 2”, the dimensionless critical flow velocity for first-mode divergence and the critical coupled-mode flutter flow velocity are obtained, and the variations between the real part and imaginary part of dimensionless complex frequency and fluid velocity, mass ratio and the power law exponent (or graded index, volume fraction) for FGM pipe conveying fluid are analyzed.

  14. Lossless hybridization between photovoltaic and thermoelectric devices.

    Science.gov (United States)

    Park, Kwang-Tae; Shin, Sun-Mi; Tazebay, Abdullah S; Um, Han-Don; Jung, Jin-Young; Jee, Sang-Won; Oh, Min-Wook; Park, Su-Dong; Yoo, Bongyoung; Yu, Choongho; Lee, Jung-Ho

    2013-01-01

    The optimal hybridization of photovoltaic (PV) and thermoelectric (TE) devices has long been considered ideal for the efficient harnessing solar energy. Our hybrid approach uses full spectrum solar energy via lossless coupling between PV and TE devices while collecting waste energy from thermalization and transmission losses from PV devices. Achieving lossless coupling makes the power output from the hybrid device equal to the sum of the maximum power outputs produced separately from individual PV and TE devices. TE devices need to have low internal resistances enough to convey photo-generated currents without sacrificing the PV fill factor. Concomitantly, a large number of p-n legs are preferred to drive a high Seebeck voltage in TE. Our simple method of attaching a TE device to a PV device has greatly improved the conversion efficiency and power output of the PV device (~30% at a 15°C temperature gradient across a TE device).

  15. Object Conveyance Algorithm for Multiple Mobile Robots based on Object Shape and Size

    Directory of Open Access Journals (Sweden)

    Purnomo Sejati

    2016-05-01

    Full Text Available This paper describes a determination method of a number of a team for multiple mobile robot object conveyance. The number of robot on multiple mobile robot systems is the factor of complexity on robots formation and motion control. In our previous research, we verified the use of the complex-valued neural network for controlling multiple mobile robots in object conveyance problem. Though it is a significant issue to develop effective determination team member for multiple mobile robot object conveyance, few studies have been done on it. Therefore, we propose an algorithm for determining the number of the team member on multiple mobile robot object conveyance with grasping push. The team member is determined based on object weight to obtain appropriate formation. First, the object shape and size measurement is carried out by a surveyor robot that approaches and surrounds the object. During surrounding the object, the surveyor robot measures its distance to the object and records for estimating the object shape and size. Since the object shape and size are estimated, the surveyor robot makes initial push position on the estimated push point and calls additional robots for cooperative push. The algorithm is validated in several computer simulations with varying object shape and size. As a result, the proposed algorithm is promising for minimizing the number of the robot on multiple mobile robot object conveyance.

  16. STABILITY ANALYSIS OF MAXWELL VISCOELASTIC PIPES CONVEYING FLUID WITH BOTH ENDS SIMPLY SUPPORTED

    Institute of Scientific and Technical Information of China (English)

    赵凤群; 王忠民; 冯振宇; 刘宏昭

    2001-01-01

    On the basis of some studies of elastic pipe conveying fluid, the dynamic behavior and stability of Maxwell viscoelastic pipes conveying fluid with both ends simply supported, which are gyroscopic conservative system, were investigated by using the finite difference method and the corresponding recurrence formula. The effect of relaxation time of viscoelastic materials on the variation curve between dimensionless flow velocity and the real part and imaginary part of dimensionless complex frequencies in the first-three-order modes were analyzed concretely. It is found that critical flow velocities of divergence instability of Maxwell viscoelastic pipes conveying fluid with both ends simply supported decrease with the decrease of the relaxation time, while after the onset of divergence instability(buckling)critical flow velocities of coupled-mode flutter increase with the decrease of the relaxation time. Particularly, in the case of greater mass ratio, with the decrease of relaxation time,the onset of coupled-mode flutter delays, and even does not take place. When the relaxation time is greater than 103 , stability behavior of viscoelastic pipes conveying fluid is almost similar to the elastic pipes conveying fluid.

  17. A patient-safety and professional perspective on non-conveyance in ambulance care: a systematic review.

    Science.gov (United States)

    Ebben, Remco H A; Vloet, Lilian C M; Speijers, Renate F; Tönjes, Nico W; Loef, Jorik; Pelgrim, Thomas; Hoogeveen, Margreet; Berben, Sivera A A

    2017-07-17

    This systematic review aimed to describe non-conveyance in ambulance care from patient-safety and ambulance professional perspectives. The review specifically focussed at describing (1) ambulance non-conveyance rates, (2) characteristics of non-conveyed patients, (3) follow-up care after non-conveyance, (4) existing guidelines or protocols, and (5) influencing factors during the non-conveyance decision making process. We systematically searched MEDLINE, PubMed, CINAHL, EMBASE, and reference lists of included articles, in June 2016. We included all types of peer-reviewed designs on the five topics. Couples of two independent reviewers performed the selection process, the quality assessment, and data extraction. We included 67 studies with low to moderate quality. Non-conveyance rates for general patient populations ranged from 3.7%-93.7%. Non-conveyed patients have a variety of initial complaints, common initial complaints are related to trauma and neurology. Furthermore, vulnerable patients groups as children and elderly are more represented in the non-conveyance population. Within 24 h-48 h after non-conveyance, 2.5%-6.1% of the patients have EMS representations, and 4.6-19.0% present themselves at the ED. Mortality rates vary from 0.2%-3.5% after 24 h, up to 0.3%-6.1% after 72 h. Criteria to guide non-conveyance decisions are vital signs, ingestion of drugs/alcohol, and level of consciousness. A limited amount of non-conveyance guidelines or protocols is available for general and specific patient populations. Factors influencing the non-conveyance decision are related to the professional (competencies, experience, intuition), the patient (health status, refusal, wishes and best interest), the healthcare system (access to general practitioner/other healthcare facilities/patient information), and supportive tools (online medical control, high risk card). Non-conveyance rates for general and specific patient populations vary. Patients in the non-conveyance

  18. HYBRID EXCITATION CLAW-POLE SYNCHRONOUS GENERATOR WITH MAGNETIC CIRCUIT SERIES CONNECTION%串联磁路混合励磁爪极发电机的研究

    Institute of Scientific and Technical Information of China (English)

    赵朝会; 秦海鸿; 严仰光

    2009-01-01

    针对电励磁爪极发电机效率低、永磁爪极发电机磁场调节困难的问题,提出了一种串联磁路混合励磁爪极同步发电机,利用磁路计算方法和三维有限元的分析研究了这种新型电机各部分的磁密大小,确定了合适的极对数和合理的磁钢厚度,探讨了这种新型电机的空载特性、外特性和调节特性.研究表明:串联磁路混合励磁爪极发电机合适的极对数为2,且磁钢厚度存在一个较为合理的优化值.相对于电励磁爪极发电机,它实现了励磁电流的双向控制;相对于永磁爪极发电机它使得输出电压可调,在更宽的负载范围内实现了输出电压的恒定.在参数相同的情况下,与电励磁爪极发电机相比,该电机具有更高的气隙磁密和功率密度.%To solve the low efficiency of electric excitation claw-pole synchronous generator(EECPSG) and regulate the magnetic field of permanent magnet (PM) claw-pole synchronous generator(PMCPSG), a novel hybrid excitation claw-pole synchronous generator(HECPSG) with magnetic circuit series connection is proposed. Through the simulation study on the generator using the calculation method for magnetic circuit and 3-D finite element method(FEA), the appropriate magnet thickness and the number of pole-pairs for the proposed generator are determined. Its off-loading characteristics, load characteristics, and regulation behaviors are investigated. The study shows that the appropriate number of pole-pairs in HECPSG with series magnetic circuits is two, and there exists an optimum magnet thickness.Compared to EECPSG, HECPSG realizes dual-directional control to the excitation current. Moreover, the generator can adjust the output voltage and keep the output voltage stable in a broad load range. Under the condition of same parametes, the motor has higer air-gap flux density and power density.

  19. 新型高效杆件运送装置及方法%New Type Efficient Rod Piece Conveyer and Conveying Method

    Institute of Scientific and Technical Information of China (English)

    杨衍亮; 赖永萍; 汤韬

    2013-01-01

    设计了一种圆形杆件的运送装置,该装置主要由一个特殊材料制造的圆锥体状导向器和内力紧固系统构成,利用普通机械传动力拖拽,可使之在地面滑行。圆锥体状导向器遇到地面障碍时能自动滑过,杆件也随之绕行。该装置不受地形影响,能过沟、坎、河流,综合效率可提高30倍以上,有效解决了交通困难地区大型杆件的运输问题。%A round rod piece conveyer is designed, which is composed of a cone-shaped director made of special material and internal force of fastening system. It can slide on the ground with ordinary mechanical driving force. The cone director can slide around the ground obstacle and the rod piece follows it around. Not affected by terrain, this conveyer can pass ditches, ridges and rivers. The comprehensive efficiency can be improved by 30 times, and the rod piece conveying problem in areas where there is transportation difficulty is effectively solved.

  20. THE DYNAMIC BEHAVIORS OF VISCOELASTIC PIPE CONVEYING FLUID WITH THE KELVIN MODEL

    Institute of Scientific and Technical Information of China (English)

    Wang Zhongmin; Zhao Fengqun; Feng Zhenyu; Liu Hongzhao

    2000-01-01

    Based on the differential constitutive relationship of linear viscoelastic material, a solid-liquid coupling vibration equation for viscoelastic pipe conveying fluid is derived by the D'Alembert's principle. The critical flow velocities and natural frequencies of the cantilever pipe conveying fluid with the Kelvin model ( flutter instability) are calculated with the modified finite difference method in the form of the recurrence for mula. The curves between the complex frequencies of the first, second and third mode and flow velocity of the pipe are plotted. On the basis of the numerical calculation results, the dynamic behaviors and stability of the pipe are discussed. It should be pointed out that the delay time of viscoelastic material with the Kelvin model has a remarkable effect on the dynamic characteristics and stability behaviors of the cantilevered pipe conveying fluid, which is a gyroscopic non-conservative system.