WorldWideScience

Sample records for hwhf acceptance requirements

  1. Physical system requirements - Accept waste

    International Nuclear Information System (INIS)

    1992-08-01

    The Nuclear Waste Policy Act (NWPA) assigned to the Department of Energy (DOE) the responsibility for managing the disposal of spent nuclear fuel and high-level radioactive waste and established the Office of Civilian Radioactive Waste Management (OCRWM) for that purpose. The Secretary of Energy, in his November 1989 report to Congress (DOE/RW-0247), announced new initiatives for the conduct of the Civilian Radioactive Waste Management (CRWM) program. One of these initiatives was to establish improved management structure and procedures. In response, OCRWM performed a management study and the OCRWM Director subsequently issued the Management Systems improvement Strategy (MSIS) on August 10, 1990, calling for a rigorous implementation of systems engineering principles with a special emphasis on functional analysis. The functional analysis approach establishes a framework for integrating the program management efforts with the technical requirements analysis into a single, unified, and consistent program. This approach recognizes that just as the facilities and equipment comprising the physical waste management system must perform certain functions, so must certain programmatic and management functions be performed within the program in order to successfully bring the physical system into being. Thus, a comprehensive functional analysis effort has been undertaken which is intended to: Identify the functions that must be performed to fulfill the waste disposal mission; Identify the corresponding requirements imposed on each of the functions; and Identify the conceptual architecture that will be used to satisfy the requirements. The principal purpose of this requirements document is to present the results that were obtained from the conduct of a functional analysis effort for the Accept Waste mission

  2. Waste Acceptance System Requirements document (WASRD)

    International Nuclear Information System (INIS)

    1993-01-01

    This Waste Acceptance System Requirements document (WA-SRD) describes the functions to be performed and the technical requirements for a Waste Acceptance System for accepting spent nuclear fuel (SNF) and high-level radioactive waste (HLW) into the Civilian Radioactive Waste Management System (CRWMS). This revision of the WA-SRD addresses the requirements for the acceptance of HLW. This revision has been developed as a top priority document to permit DOE's Office of Environmental Restoration and Waste Management (EM) to commence waste qualification runs at the Savannah River Site's (SRS) Defense Waste Processing Facility (DWPF) in a timely manner. Additionally, this revision of the WA-SRD includes the requirements from the Physical System Requirements -- Accept Waste document for the acceptance of SNF. A subsequent revision will fully address requirements relative to the acceptance of SNF

  3. Preliminary waste acceptance requirements - Konrad repository project

    International Nuclear Information System (INIS)

    Brennecke, P.W.; Warnecke, E.H.

    1991-01-01

    In Germany, the planned Konrad repository is proposed for the disposal of all types of radioactive wastes whose thermal influence upon the host rock is negligible. The Bundesamt fuer Strahlenschutz has established Preliminary Waste Acceptance Requirements (as of April 1990) for this facility. The respective requirements were developed on the basis of the results of site-specific safety assessments. They include general requirements on the waste packages to be disposed of as well as more specific requirements on the waste forms, the packaging and the radionuclide inventory per waste package. In addition, the delivery of waste packages was regulated. An outline of the structure and the elements of the Preliminary Waste Acceptance Requirements of April 1990 is given including comments on their legal status. (Author)

  4. Environmentally acceptable thread compounds: Requirements defined

    International Nuclear Information System (INIS)

    Stringfellow, W.D.; Hendriks, R.V.; Jacobs, N.L.

    1993-01-01

    New environmental regulations on thread compounds are now being enforced in several areas with strong maritime tradition and a sensitive environment. These areas include Indonesia, Alaska and portions of Norway. The industry generally recognizes the environmental concerns but, with wider enforcement of regulations imminent, has not been able to define clearly the requirements for environmental compliance. This paper, written in collaboration with The Netherlands State Supervision of Mines, is based on the National Policy on Thread Compounds of The Netherlands. This national policy is representative of policies being followed by other North Sea governments. Similar policies might well be adopted by other governments worldwide. These policies will affect the operator, drilling contractor, and supplier. This paper provides a specific and detailed definition of thread compound requirements by addressing four relevant categories. The categories of interest are regulatory approval, environmental, health, and performance

  5. Preliminary waste acceptance requirements for the planned Konrad repository

    International Nuclear Information System (INIS)

    Warnecke, E.; Brennecke, P.

    1987-01-01

    The Physikalisch-Technische Bundesanstalt (PTB) has established Preliminary Waste Acceptance Requirements for the planned Konrad repository. These requirements were developed, in accordance with the Safety Criteria of the Reactor Safety Commission, with the help of a site specific safety assessment; they are under the reservation of the plan approval procedure, which is still in progress. In developing waste acceptance requirements, the PTB fulfills one of its duties as the institute responsible for waste disposal and gives guidelines for waste conditioning to waste producers and conditioners. (orig.) [de

  6. Acceptance of Colonoscopy Requires more than Test Tolerance

    Directory of Open Access Journals (Sweden)

    Amanda Condon

    2008-01-01

    Full Text Available BACKGROUND: Colon cancer screening, including colonoscopy, lags behind other forms of cancer screening for participation rates. The intrinsic nature of the endoscopic procedure may be an important barrier that limits patients from finding this test acceptable and affects willingness to undergo screening. With colon cancer screening programs emerging in Canada, test characteristics and their impact on acceptance warrant consideration.

  7. Identification of permit and waste acceptance criteria provisions requiring modification for acceptance of commercial mixed waste

    International Nuclear Information System (INIS)

    1994-03-01

    In October 1990, representatives of States and compact regions requested that the US Department of Energy (DOE) explore an agreement with host States and compact regions under which DOE would accept commercial mixed low-level radioactive waste (LLW) at DOE's own treatment and disposal facilities. A program for DOE management of commercial mixed waste is made potentially more attractive in light of the low commercial mixed waste volumes, high regulatory burdens, public opposition to new disposal sites, and relatively high cost of constructing commercial disposal facilities. Several studies were identified as essential in determining the feasibility of DOE accepting commercial mixed waste for disposal. The purpose of this report is to identify any current or proposed waste acceptance criteria (WAC) or Resource Conservation and Recovery Act (RCRA) provisions that would have to be modified for commercial mixed waste acceptance at specified DOE facilities. Following the introduction, Section 2 of this report (a) provides a background summary of existing and proposed mixed waste disposal facilities at each DOE site, and (b) summarizes the status of any RCRA Part B permit and WAC provisions relating to the disposal of mixed waste, including provisions relating to acceptance of offsite waste. Section 3 provides overall conclusions regarding the current status and permit modifications that must be implemented in order to grant DOE sites authority under their permits to accept commercial mixed waste for disposal. Section 4 contains a list of references

  8. Supervision of nuclear safety - IAEA requirements, accepted solutions, trends

    International Nuclear Information System (INIS)

    Jurkowski, M.

    2007-01-01

    Ten principles of the nuclear safety, based on the IAEA's standards are presented. Convention on Nuclear Safety recommends for nuclear safety landscape, the control transparency, culture safety, legal framework and knowledge preservation. Examples of solutions accepted in France, Finland, and Czech Republic are discussed. New trends in safety fundamentals and Integration Regulatory Review are presented

  9. Nevada test site defense waste acceptance criteria, certification, and transfer requirements

    International Nuclear Information System (INIS)

    1988-10-01

    The Nevada Test Site (NTS) Defense Waste Acceptance Criteria, Certification and Transfer Requirements establishes procedures and criteria for safe transfer, disposal, and storage of defense transuranic, low-level, and mixed waste at the NTS. Included are an overview of the NTS defense waste management program; the NTS waste acceptance criteria for transuranic, low-level, and mixed wastes; waste certification requirements and guidance; application to submit waste; and requirements for waste transfer and receipt. 5 figs., 16 tabs

  10. Probabilistic Requirements (Partial) Verification Methods Best Practices Improvement. Variables Acceptance Sampling Calculators: Empirical Testing. Volume 2

    Science.gov (United States)

    Johnson, Kenneth L.; White, K. Preston, Jr.

    2012-01-01

    The NASA Engineering and Safety Center was requested to improve on the Best Practices document produced for the NESC assessment, Verification of Probabilistic Requirements for the Constellation Program, by giving a recommended procedure for using acceptance sampling by variables techniques as an alternative to the potentially resource-intensive acceptance sampling by attributes method given in the document. In this paper, the results of empirical tests intended to assess the accuracy of acceptance sampling plan calculators implemented for six variable distributions are presented.

  11. Evidentiary requirements to identify potentially acceptable sites (PAS) in crystalline rock

    International Nuclear Information System (INIS)

    Comella, P.A.; Smith, B.H.

    1985-01-01

    This report contains information on the evidentiary requirements to identify potentially acceptable sites in crystalline rock for waste disposal. Topics addressed include: chronology, key regulatory assumptions, statutory framework for identifying potentially acceptable sites, application of 10 disqualifiers, consideration of favorable and potentially adverse conditions, a composite favorability analysis, and a proposed outline for PAS identification decision document

  12. Acceptance criteria for the physical protection upgrade rule requirements for fixed sites. Information guide

    International Nuclear Information System (INIS)

    Dwyer, P.

    1980-09-01

    This document has been developed as a tool to assist in providing consistent evaluation of upgraded physical security plans submitted in response to the Physical Protection Upgrade Rule, effective March 25, 1980. It presents a means for assuring licensee compliance with every regulatory requirement of particular significance to the protection of the public health and safety. Acceptance criteria are included to determine the extent to which each licensee meets the regulatory requirements. The format parallels Regulatory Guide 5.52, Standard Format and Content of a Licensee Physical Protection Plan for Strategic Special Nuclear Material at Fixed Sites

  13. Systematic handling of requirements and conditions (in compliance with waste acceptance requirements for a radioactive waste disposal facility)

    International Nuclear Information System (INIS)

    Keyser, Peter; Helander, Anita

    2012-01-01

    This Abstract and presentation will demonstrate the need for a structured requirement management and draw upon experiences and development from SKB requirements data base and methodology, in addition to international guidelines and software tools. The presentation will include a discussion on how requirement management can be applied for the decommissioning area. The key issue in the decommissioning of nuclear facilities is the progressive removal of hazards, by stepwise decontamination and dismantling activities that have to be carried out safely and within the boundaries of an approved safety case. For decommissioning there exists at least two safety cases, one for the pre-disposal activities and one for the disposal facility, and a need for a systematic handling of requirements and conditions to safely manage the radioactive waste in the long term. The decommissioning safety case is a collection of arguments and evidence to demonstrate the safety of a decommissioning project. It also includes analyzing and updating the decommissioning safety case in accordance with the waste acceptance criteria's and the expected output, i.e. waste packages. It is a continuous process to confirm that all requirements have been met. On the other hand there is the safety case for a radioactive waste disposal facility, which may include the following processes and requirements: i) Integrating relevant scientific (and other) information in a structured, traceable and transparent way and, thereby, developing and demonstrating an understanding of the potential behavior and performance of the disposal system; ii) Identifying uncertainties in the behavior and performance of the disposal system, describing the possible significance of the uncertainties, and identifying approaches for the management of significant uncertainties; iii) Demonstrating long-term safety and providing reasonable assurance that the disposal facility will perform in a manner that protects human health and the

  14. Quality assurance requirements and methods for high level waste package acceptability

    International Nuclear Information System (INIS)

    1992-12-01

    This document should serve as guidance for assigning the necessary items to control the conditioning process in such a way that waste packages are produced in compliance with the waste acceptance requirements. It is also provided to promote the exchange of information on quality assurance requirements and on the application of quality assurance methods associated with the production of high level waste packages, to ensure that these waste packages comply with the requirements for transportation, interim storage and waste disposal in deep geological formations. The document is intended to assist both the operators of conditioning facilities and repositories as well as national authorities and regulatory bodies, involved in the licensing of the conditioning of high level radioactive wastes or in the development of deep underground disposal systems. The document recommends the quality assurance requirements and methods which are necessary to generate data for these parameters identified in IAEA-TECDOC-560 on qualitative acceptance criteria, and indicates where and when the control methods can be applied, e.g. in the operation or commissioning of a process or in the development of a waste package design. Emphasis is on the control of the process and little reliance is placed on non-destructive or destructive testing. Qualitative criteria, relevant to disposal of high level waste, are repository dependent and are not addressed here. 37 refs, 3 figs, 2 tabs

  15. 42 CFR 137.285 - Are Self-Governance Tribes required to accept Federal environmental responsibilities to enter...

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Are Self-Governance Tribes required to accept..., DEPARTMENT OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Nepa Process § 137.285 Are Self-Governance Tribes required to accept Federal environmental responsibilities to enter into a construction...

  16. Radioactive waste management: review on clearance levels and acceptance criteria legislation, requirements and standards.

    Science.gov (United States)

    Maringer, F J; Suráň, J; Kovář, P; Chauvenet, B; Peyres, V; García-Toraño, E; Cozzella, M L; De Felice, P; Vodenik, B; Hult, M; Rosengård, U; Merimaa, M; Szücs, L; Jeffery, C; Dean, J C J; Tymiński, Z; Arnold, D; Hinca, R; Mirescu, G

    2013-11-01

    In 2011 the joint research project Metrology for Radioactive Waste Management (MetroRWM)(1) of the European Metrology Research Programme (EMRP) started with a total duration of three years. Within this project, new metrological resources for the assessment of radioactive waste, including their calibration with new reference materials traceable to national standards will be developed. This paper gives a review on national, European and international strategies as basis for science-based metrological requirements in clearance and acceptance of radioactive waste. © 2013 Elsevier Ltd. All rights reserved.

  17. Requirements on radioactive waste for disposal (waste acceptance requirements as of February 2017). Konrad repository; Anforderungen an endzulagernde radioaktive Abfaelle (Endlagerungsbedingungen, Stand: Februar 2017). Endlager Konrad

    Energy Technology Data Exchange (ETDEWEB)

    Kugel, Karin; Moeller, Kai (eds.)

    2017-02-10

    The Bundesamt fuer Strahlenschutz (BfS - Federal Office for Radiation Protection) has established waste acceptance requirements for the Konrad repository. These requirements were developed on the basis of the results of a site-specific safety assessment. They include general requirements on waste packages and specific requirements on waste forms and packagings as well as limitations for activities of individual radionuclides and limitations to masses of non-radioactive harmful substances. Requirements on documentation and delivery of waste packages were additionally included.

  18. Guidelines and Requirements for Review and Acceptance of Memorials at National Cemeteries

    Data.gov (United States)

    Department of Veterans Affairs — This documents provides guidance on the appropriate design, size, and procedures for the acceptance of donations of memorials to the National Cemetery Administration

  19. Sewage sludge disposal-requirements, expense and acceptance; Klaerschlammentsorgung zwischen Anspruch, Aufwand und Akzeptanz

    Energy Technology Data Exchange (ETDEWEB)

    Gruenebaum, T. [Ruhrverband, Essen (Germany)

    1997-02-01

    Production of sewage sludges is unavoidable at wastewater treatment. Sewage sludges shall be used in agriculture. Although the content of hazardous substances in sewage sludges has obviously been minimized, the use of those sludges is limited because of the low acceptance in agriculture and food industry. Therefore it is necessary to build up methods of disposal which make possible and ensure a medium- or even longtime disposal. Incineration seems to be the solution since the requirements for landfill of sewage sludges have been renewed. The currently valid transitional regulation lead to remarkable reactions of the disposal market. The plans for sewage sludge disposal have to agree with the principles of environmental protection, safety, economic efficiency, good realization and operational handling. (orig.) [Deutsch] Bei der Abwasserreinigung faellt Klaerschlamm an. Dieser ist moeglichst in der Landwirtschaft zu verwerten. Obwohl die Schadstoffgehalte der Klaerschlaemme in den letzten 15 Jahren sehr deutlich gesunken sind, ist der Einsatz durch Akzeptanzprobleme in der Landwirtschaft und bei der Nahrungsmittelindustrie limitiert. Es gilt deshalb, Entsorgungspfade aufzubauen, die eine mittel- und langfristige Sicherung der Entsorgung ermoeglichen. Nach den neueren Anforderungen an eine Deponierung ist demnach immer eine Verbrennung vorzusehen. Die z.Z. noch geltende Uebergangsregelung hat zu massiven Reaktionen des Entsorgungsmarktes gefuehrt. Die Planungen zur Klaerschlammentsorgung muessen sich an den Grundsaetzen der Umsetzbarkeit und betrieblichen Handhabbarkeit ausrichten. (orig.)

  20. Shielding requirements on-site loading and acceptance testing on the Leksell gamma knife

    International Nuclear Information System (INIS)

    Maitz, A.H.; Lunsford, L.D.; Wu, A.; Lindner, G.; Flickinger, J.C.

    1990-01-01

    On August 14, 1987, the first stereotactic radiosurgical procedure using the gamma knife was performed in North America. Located in a self-contained radiosurgical suite in the basement of Presbyterian-University Hospital in Pittsburgh, Pennsylvania. This device uses 201 highly focused beams 60Co for the single-treatment closed-skull irradiation of brain lesions localized by stereotactic techniques (radiosurgery). One hundred and fifty-two patients with intracranial arteriovenous malformations or brain tumors were treated in the first year of operation. The Presbyterian University Hospital of Pittsburgh gamma knife is the first such unit in which the 60Co sources were loaded on-site. This effort required us to solve some difficult and unusual problems encountered during site preparation, delivery, and loading of the unit in a busy hospital setting. The solutions developed enabled installation and use of the gamma knife with minimal disruption of hospital activities while maintaining acceptable levels of exposure to radiation. Environmental surveys performed during the loading of the 201 radioactive sources (total, 219 TBq) confirmed that on-site loading is possible and practical. Our experience in the design, construction, and implementation of the first North American gamma knife supports the practicality and safety of on-site loading and may be of value in the planning and development of future gamma knife installations

  1. Probabilistic Requirements (Partial) Verification Methods Best Practices Improvement. Variables Acceptance Sampling Calculators: Derivations and Verification of Plans. Volume 1

    Science.gov (United States)

    Johnson, Kenneth L.; White, K, Preston, Jr.

    2012-01-01

    The NASA Engineering and Safety Center was requested to improve on the Best Practices document produced for the NESC assessment, Verification of Probabilistic Requirements for the Constellation Program, by giving a recommended procedure for using acceptance sampling by variables techniques. This recommended procedure would be used as an alternative to the potentially resource-intensive acceptance sampling by attributes method given in the document. This document contains the outcome of the assessment.

  2. 10 CFR 2.304 - Formal requirements for documents; signatures; acceptance for filing.

    Science.gov (United States)

    2010-01-01

    ... through the E-Filing system written testimony or hearing exhibits in advance of a hearing, the written... for filing. 2.304 Section 2.304 Energy NUCLEAR REGULATORY COMMISSION RULES OF PRACTICE FOR DOMESTIC...; signatures; acceptance for filing. (a) Docket numbers and titles. Each document filed in an adjudication to...

  3. 27 CFR 73.11 - What are the required components and controls for acceptable electronic signatures?

    Science.gov (United States)

    2010-04-01

    ... components and controls for acceptable electronic signatures? 73.11 Section 73.11 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Signatures § 73.11...

  4. Development and implementation of IT require focus on user participation, acceptance and workflow

    DEFF Research Database (Denmark)

    Sølling, Ina Koldkjær; Carøe, Per; Mathiesen, Kirsten Siggaard

    Abstract. The study ”Online Care” follows a municipal project ”Online Welfare” where a nurse’s presence in the citizen's own home was replaced by online communication. The paper is based on a citizen’s perspective and seeks to develop meaningful workflow for the benefit of citizens with medical...... approved by the Danish System of Ethics in Science and is conducted in collaboration with Aalborg University, Aalborg Municipality and DanAge, (NGO). The municipality's goal of efficiency and financial savings regarding ”Online Welfare” was not honored due to insufficient network infrastructure...... to participate. Citizens, who were included in the study accepted and adopted the technology however, "Online Welfare" could not replace the care they used to receive. Therefore, the offer was perceived as an "appendix" which tended to meaninglessness by some of the citizens.The nurses' perception of nursing...

  5. Order acceptance in food processing systems with random raw material requirements

    NARCIS (Netherlands)

    Kilic, Onur A.; van Donk, Dirk Pieter; Wijngaard, Jacob; Tarim, S. Armagan

    This study considers a food production system that processes a single perishable raw material into several products having stochastic demands. In order to process an order, the amount of raw material delivery from storage needs to meet the raw material requirement of the order. However, the amount

  6. Requiring influenza vaccination for health care workers: seven truths we must accept.

    Science.gov (United States)

    Poland, Gregory A; Tosh, Pritish; Jacobson, Robert M

    2005-03-18

    In this paper we outline the seven primary truths supporting the call for requiring influenza immunization of all health care workers. We view this as a serious patient safety issue, given the clear and compelling data regarding the frequency and severity of influenza infection. In addition, clear-cut safety, efficacy, economic, legal, and ethical platforms support the use of influenza vaccine. Unfortunately health care workers have demonstrated, over almost 25 years that they are unwilling to comply with voluntary influenza immunization programs utilizing a variety of education and incentive programs, at rates sufficient to protect the patients in their care. We suggest that an annual influenza immunization should be required for every health care worker with direct patient contact, unless a medical contraindication or religious objection exists, or an informed declination is signed by the health care worker. High rates of health care worker immunization will benefit patients, health care workers, their families and employers, and the communities within which they work and live.

  7. Criteria required for an acceptable point-of-care test for UTI detection: Obtaining consensus using the Delphi technique.

    Science.gov (United States)

    Weir, Nichola-Jane M; Pattison, Sally H; Kearney, Paddy; Stafford, Bob; Gormley, Gerard J; Crockard, Martin A; Gilpin, Deirdre F; Tunney, Michael M; Hughes, Carmel M

    2018-01-01

    Urinary Tract Infections (UTIs) are common bacterial infections, second only to respiratory tract infections and particularly prevalent within primary care. Conventional detection of UTIs is culture, however, return of results can take between 24 and 72 hours. The introduction of a point of care (POC) test would allow for more timely identification of UTIs, facilitating improved, targeted treatment. This study aimed to obtain consensus on the criteria required for a POC UTI test, to meet patient need within primary care. Criteria for consideration were compiled by the research team. These criteria were validated through a two-round Delphi process, utilising an expert panel of healthcare professionals from across Europe and United States of America. Using web-based questionnaires, panellists recorded their level of agreement with each criterion based on a 5-point Likert Scale, with space for comments. Using median response, interquartile range and comments provided, criteria were accepted/rejected/revised depending on pre-agreed cut-off scores. The first round questionnaire presented thirty-three criteria to the panel, of which 22 were accepted. Consensus was not achieved for the remaining 11 criteria. Following response review, one criterion was removed, while after revision, the remaining 10 criteria entered the second round. Of these, four were subsequently accepted, resulting in 26 criteria considered appropriate for a POC test to detect urinary infections. This study generated an approved set of criteria for a POC test to detect urinary infections. Criteria acceptance and comments provided by the healthcare professionals also supports the development of a multiplex point of care UTI test.

  8. Autonomous Vehicles Require Socio-Political Acceptance-An Empirical and Philosophical Perspective on the Problem of Moral Decision Making.

    Science.gov (United States)

    Bergmann, Lasse T; Schlicht, Larissa; Meixner, Carmen; König, Peter; Pipa, Gordon; Boshammer, Susanne; Stephan, Achim

    2018-01-01

    Autonomous vehicles, though having enormous potential, face a number of challenges. As a computer system interacting with society on a large scale and human beings in particular, they will encounter situations, which require moral assessment. What will count as right behavior in such situations depends on which factors are considered to be both morally justified and socially acceptable. In an empirical study we investigated what factors people recognize as relevant in driving situations. The study put subjects in several "dilemma" situations, which were designed to isolate different and potentially relevant factors. Subjects showed a surprisingly high willingness to sacrifice themselves to save others, took the age of potential victims in a crash into consideration and were willing to swerve onto a sidewalk if this saved more lives. The empirical insights are intended to provide a starting point for a discussion, ultimately yielding societal agreement whereby the empirical insights should be balanced with philosophical considerations.

  9. Spent fuel disassembly hardware and other non-fuel bearing components: characterization, disposal cost estimates, and proposed repository acceptance requirements

    Energy Technology Data Exchange (ETDEWEB)

    Luksic, A.T.; McKee, R.W.; Daling, P.M.; Konzek, G.J.; Ludwick, J.D.; Purcell, W.L.

    1986-10-01

    There are two categories of waste considered in this report. The first is the spent fuel disassembly (SFD) hardware. This consists of the hardware remaining after the fuel pins have been removed from the fuel assembly. This includes end fittings, spacer grids, water rods (BWR) or guide tubes (PWR) as appropriate, and assorted springs, fasteners, etc. The second category is other non-fuel-bearing (NFB) components the DOE has agreed to accept for disposal, such as control rods, fuel channels, etc., under Appendix E of the standard utiltiy contract (10 CFR 961). It is estimated that there will be approximately 150 kg of SFD and NFB waste per average metric ton of uranium (MTU) of spent uranium. PWR fuel accounts for approximately two-thirds of the average spent-fuel mass but only 50 kg of the SFD and NFB waste, with most of that being spent fuel disassembly hardware. BWR fuel accounts for one-third of the average spent-fuel mass and the remaining 100 kg of the waste. The relatively large contribution of waste hardware in BWR fuel, will be non-fuel-bearing components, primarily consisting of the fuel channels. Chapters are devoted to a description of spent fuel disassembly hardware and non-fuel assembly components, characterization of activated components, disposal considerations (regulatory requirements, economic analysis, and projected annual waste quantities), and proposed acceptance requirements for spent fuel disassembly hardware and other non-fuel assembly components at a geologic repository. The economic analysis indicates that there is a large incentive for volume reduction.

  10. TRU [transuranic] waste certification compliance requirements for acceptance of newly generated contact-handled wastes to be shipped to the Waste Isolation Pilot Plant: Revision 2

    International Nuclear Information System (INIS)

    1989-01-01

    Compliance requirements are presented for certifying that unclassified, newly generated (NG), contact-handled (CH) transuranic (TRU) solid wastes from defense programs meet the Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC). Where appropriate, transportation and interim storage requirements are incorporated; however, interim storage sites may have additional requirements consistent with these requirements. All applicable Department of Energy (DOE) orders must continue to be met. The compliance requirements for stored or buried waste are not addressed in this document. The compliance requirements are divided into four sections, primarily determined by the general feature that the requirements address. These sections are General Requirements, Waste Container Requirements, Waste Form Requirements, and Waste Package Requirements. The waste package is the combination of waste container and waste. 10 refs., 1 fig

  11. Positive Psychological Wellbeing Is Required for Online Self-Help Acceptance and Commitment Therapy for Chronic Pain to be Effective.

    Science.gov (United States)

    Trompetter, Hester R; Bohlmeijer, Ernst T; Lamers, Sanne M A; Schreurs, Karlein M G

    2016-01-01

    The web-based delivery of psychosocial interventions is a promising treatment modality for people suffering from chronic pain, and other forms of physical and mental illness. Despite the promising findings of first studies, patients may vary in the benefits they draw from self-managing a full-blown web-based psychosocial treatment. We lack knowledge on moderators and predictors of change during web-based interventions that explain for whom web-based interventions are especially (in)effective. In this study, we primarily explored for which chronic pain patients web-based Acceptance and Commitment Therapy (ACT) was (in)effective during a large three-armed randomized controlled trial. Besides standard demographic, physical and psychosocial factors we focused on positive mental health. Data from 238 heterogeneously diagnosed chronic pain sufferers from the general Dutch population following either web-based ACT (n = 82), or one of two control conditions [web-based Expressive Writing (EW; n = 79) and Waiting List (WL; n = 77)] were analysed. ACT and EW both consisted of nine modules and lasted nine to 12 weeks. Exploratory linear regression analyses were performed using the PROCESS macro in SPSS. Pain interference at 3-month follow-up was predicted from baseline moderator (characteristics that influence the outcome of specific treatments in comparison to other treatments) and predictor (characteristics that influence outcome regardless of treatment) variables. The results showed that none of the demographic or physical characteristics moderated ACT treatment changes compared to both control conditions. The only significant moderator of change compared to both EW and WL was baseline psychological wellbeing, and pain intensity was a moderator of change compared to EW. Furthermore, higher pain interference, depression and anxiety, and also lower levels of emotional well-being predicted higher pain interference in daily life 6 months later. These results suggest that web

  12. Positive psychological wellbeing is required for online self-help Acceptance & Commitment Therapy for chronic pain to be effective.

    Directory of Open Access Journals (Sweden)

    Hester R. Trompetter

    2016-03-01

    Full Text Available The web-based delivery of psychosocial interventions is a promising treatment modality for people suffering from chronic pain, and other forms of physical and mental illness. Despite the promising findings of first studies, patients may vary in the benefits they draw from self-managing a full-blown web-based psychosocial treatment. We lack knowledge on moderators and predictors of change during web-based interventions that explain for whom web-based interventions are especially (ineffective. In this study, we primarily explored for which chronic pain patients web-based Acceptance & Commitment Therapy (ACT was (ineffective during a large three-armed randomized controlled trial. Besides standard demographic, physical and psychosocial factors we focused on positive mental health. Data from 238 heterogeneously diagnosed chronic pain sufferers from the general Dutch population following either web-based ACT (n=82, or one of two control conditions (web-based Expressive Writing (EW; n=79 and waiting list (WL; n=77 were analysed. ACT and EW both consisted of nine modules and lasted nine to twelve weeks. Exploratory linear regression analyses were performed using the PROCESS macro in SPSS. Pain interference at three-month follow-up was predicted from baseline moderator (characteristics that influence the outcome of specific treatments in comparison to other treatments and predictor (characteristics that influence outcome regardless of treatment variables. The results showed that none of the demographic or physical characteristics moderated ACT treatment changes compared to both control conditions. The only significant moderator of change compared to both EW and WL was baseline psychological wellbeing, and pain intensity was a moderator of change compared to EW. Furthermore, higher pain interference, depression and anxiety, and also lower levels of emotional well-being predicted higher pain interference in daily life six months later. These results

  13. Acceptable standard format and content for the fundamental nuclear material control (FNMC) plan required for low-enriched uranium facilities. Revision 2

    International Nuclear Information System (INIS)

    Joy, D.R.

    1995-12-01

    This report documents a standard format suggested by the NRC for use in preparing fundamental nuclear material control (FNMC) plans as required by the Low Enriched Uranium Reform Amendments (10CFR 74.31). This report also describes the necessary contents of a comprehensive plan and provides example acceptance criteria which are intended to communicate acceptable means of achieving the performance capabilities of the Reform Amendments. By using the suggested format, the licensee or applicant will minimize administrative problems associated with the submittal, review and approval of the FNMC plan. Preparation of the plan in accordance with this format Will assist the NRC in evaluating the plan and in standardizing the review and licensing process. However, conformance with this guidance is not required by the NRC. A license applicant who employs a format that provides a equal level of completeness and detail may use their own format. This document is also intended for providing guidance to licensees when making revisions to their FNMC plan

  14. Acceptability and Impact of a Required Palliative Care Rotation with Prerotation and Postrotation Observed Simulated Clinical Experience during Internal Medicine Residency Training on Primary Palliative Communication Skills.

    Science.gov (United States)

    Vergo, Maxwell T; Sachs, Sharona; MacMartin, Meredith A; Kirkland, Kathryn B; Cullinan, Amelia M; Stephens, Lisa A

    2017-05-01

    Improving communication training for primary palliative care using a required palliative care rotation for internal medicine (IM) residents has not been assessed. To assess skills acquisition and acceptability for IM residents not selecting an elective. A consecutive, single-arm cohort underwent preobjective structured clinical examination (OSCE) with learner-centric feedback, two weeks of clinical experience, and finally a post-OSCE to crystallize learner-centric take home points. IM second year residents from Dartmouth-Hitchcock were exposed to a required experiential palliative care rotation. Pre- and post-OSCE using a standardized score card for behavioral skills, including patient-centered interviewing, discussing goals of care/code status, and responding to emotion, as well as a confidential mixed qualitative and quantitative evaluation of the experience. Twelve residents were included in the educational program (two were excluded because of shortened experiences) and showed statistically significant improvements in overall communication and more specifically in discussing code status and responding to emotions. General patient-centered interviewing skills were not significantly improved, but prerotation scores reflected pre-existing competency in this domain. Residents viewed the observed simulated clinical experience (OSCE) and required rotation as positive experiences, but wished for more opportunities to practice communication skills in real clinical encounters. A required palliative care experiential rotation flanked by OSCEs at our institution improved the acquisition of primary palliative care communication skills similarly to other nonclinical educational platforms, but may better meet the needs of the resident and faculty as well as address all required ACGME milestones.

  15. Recommendations to the NRC on acceptable standard format and content for the Fundamental Nuclear Material Control (FNMC) Plan required for low-enriched uranium enrichment facilities

    International Nuclear Information System (INIS)

    Moran, B.W.; Belew, W.L.; Hammond, G.A.; Brenner, L.M.

    1991-11-01

    A new section, 10 CFR 74.33, has been added to the material control and accounting (MC ampersand A) requirements of 10 CFR Part 74. This new section pertains to US Nuclear Regulatory Commission (NRC)-licensed uranium enrichment facilities that are authorized to produce and to possess more than one effective kilogram of special nuclear material (SNM) of low strategic significance. The new section is patterned after 10 CFR 74.31, which pertains to NRC licensees (other than production or utilization facilities licensed pursuant to 10 CFR Part 50 and 70 and waste disposal facilities) that are authorized to possess and use more than one effective kilogram of unencapsulated SNM of low strategic significance. Because enrichment facilities have the potential capability of producing SNM of moderate strategic significance and also strategic SNM, certain performance objectives and MC ampersand A system capabilities are required in 10 CFR 74.33 that are not contained in 10 CFR 74.31. This document recommends to the NRC information that the licensee or applicant should provide in the fundamental nuclear material control (FNMC) plan. This document also describes methods that should be acceptable for compliance with the general performance objectives. While this document is intended to cover various uranium enrichment technologies, the primary focus at this time is gas centrifuge and gaseous diffusion

  16. Retinal screening acceptance, laser treatment uptake and follow-up response in diabetics requiring laser therapy in an urban diabetes care centre

    International Nuclear Information System (INIS)

    Memon, S.

    2015-01-01

    To determine the acceptance of retinal screening, Laser uptake and subsequent follow-up in diabetic patients attending the Diabetes Centre of Diabetic Association of Pakistan (DAP), Karachi. Study Design: Observational case series. Place and Duration of Study: Diabetic Centre of Diabetic Association of Pakistan (DAP), Karachi, from January 2011 to December 2012. Methodology: All the diabetic patients were screened for Diabetic Retinopathy (DR) with non-Mydriatic Fundus Camera (NMFC). Patients with DR were examined by the ophthalmologist using fundus lens and slit lamp. DR was graded for severity on the basis of modified Airlie House Classification. Patients with Sight Threatening Diabetic Retinopathy (STDR) were advised Laser treatment. Each patient was followed-up for at least 6 months. The records of patients recommended Laser were retrieved, and called for re-examination. Results: Retinal screening was accepted by all of the 8368 registered diabetics attending DAP Centre. On fundus photography, 21.2% (1777) individuals were found to have DR. Seven hundred and five (39.5%) patients were found to have STDR. Laser was advised to 96.4% (680) of STDR patients; amongst whom 70.5% (480) accepted Laser treatment. Out of 480 patients who had Laser treatment, 21.2% (107) turned out for follow-up after 6 months. Conclusion: Acceptance of retinal screening and Laser application was good; but follow-up was suboptional. (author)

  17. 1991 Acceptance priority ranking

    International Nuclear Information System (INIS)

    1991-12-01

    The Standard Contract for Disposal of Spent Nuclear Fuel and/or High- Level Radioactive Waste (10 CFR Part 961) that the Department of Energy (DOE) has executed with the owners and generators of civilian spent nuclear fuel requires annual publication of the Acceptance Priority Ranking (APR). The 1991 APR details the order in which DOE will allocate Federal waste acceptance capacity. As required by the Standard Contract, the ranking is based on the age of permanently discharged spent nuclear fuel (SNF), with the owners of the oldest SNF, on an industry-wide basis, given the highest priority. the 1991 APR will be the basis for the annual allocation of waste acceptance capacity to the Purchasers in the 1991 Annual Capacity Report (ACR), to be issued later this year. This document is based on SNF discharges as of December 31, 1990, and reflects Purchaser comments and corrections, as appropriate, to the draft APR issued on May 15, 1991

  18. Displacement compressors - acceptance tests

    CERN Document Server

    International Organization for Standardization. Geneva

    1996-01-01

    ISO 1217:2009 specifies methods for acceptance tests regarding volume rate of flow and power requirements of displacement compressors. It also specifies methods for testing liquid-ring type compressors and the operating and testing conditions which apply when a full performance test is specified.

  19. Acceptability, acceptance and decision making

    International Nuclear Information System (INIS)

    Ackerschott, H.

    2002-01-01

    There is a fundamental difference between the acceptability of a civilizatory or societal risk and the acceptability of the decision-making process that leads to a civilizatory or societal risk. The analysis of individual risk decisions - regarding who, executes when which indisputably hazardous, unhealthy or dangerous behaviour under which circumstances - is not helpful in finding solutions for the political decisions at hand in Germany concerning nuclear energy in particular or energy in general. The debt for implementation of any technology, in the sense of making the technology a success in terms of broad acceptance and general utilisation, lies with the particular industry involved. Regardless of the technology, innovation research identifies the implementation phase as most critical to the success of any innovation. In this sense, nuclear technology is at best still an innovation, because the implementation has not yet been completed. Fear and opposition to innovation are ubiquitous. Even the economy - which is often described as 'rational' - is full of this resistance. Innovation has an impact on the pivotal point between stability, the presupposition for the successful execution of decisions already taken and instability, which includes insecurity, but is also necessary for the success of further development. By definition, innovations are beyond our sphere of experience; not at the level of reliability and trust yet to come. Yet they are evaluated via the simplifying heuristics for making decisions proven not only to be necessary and useful, but also accurate in the familiar. The 'settlement of the debt of implementation', the accompanying communication, the decision-making procedures concerning the regulation of averse effects of the technology, but also the tailoring of the new technology or service itself must be directed to appropriate target groups. But the group often aimed at in the nuclear debate, the group, which largely determines political

  20. Public acceptance

    International Nuclear Information System (INIS)

    Bucaille, A.

    2006-01-01

    Full text of publication follows: A great deal of determination and professionalism are required when communicating to the public on nuclear energy. Challenging the advantages and adopting an educational tone are, of course, essential. But we have to do much more if we truly want to set people thinking and give nuclear energy its rightful position among the possible energy solutions. This is particularly important in Europe where dissension between countries is on the increase, whereas the US and China, shortly to be joined by India, have clearly decided to invest in nuclear energy. (author)

  1. An assessment of electric vehicles: technology, infrastructure requirements, greenhouse-gas emissions, petroleum use, material use, lifetime cost, consumer acceptance and policy initiatives.

    Science.gov (United States)

    Delucchi, M A; Yang, C; Burke, A F; Ogden, J M; Kurani, K; Kessler, J; Sperling, D

    2014-01-13

    Concerns about climate change, urban air pollution and dependence on unstable and expensive supplies of foreign oil have led policy-makers and researchers to investigate alternatives to conventional petroleum-fuelled internal-combustion-engine vehicles in transportation. Because vehicles that get some or all of their power from an electric drivetrain can have low or even zero emissions of greenhouse gases (GHGs) and urban air pollutants, and can consume little or no petroleum, there is considerable interest in developing and evaluating advanced electric vehicles (EVs), including pure battery-electric vehicles, plug-in hybrid electric vehicles and hydrogen fuel-cell electric vehicles. To help researchers and policy-makers assess the potential of EVs to mitigate climate change and reduce petroleum use, this paper discusses the technology of EVs, the infrastructure needed for their development, impacts on emissions of GHGs, petroleum use, materials use, lifetime costs, consumer acceptance and policy considerations.

  2. Bridging the Gap between Social Acceptance and Ethical Acceptability.

    Science.gov (United States)

    Taebi, Behnam

    2017-10-01

    New technology brings great benefits, but it can also create new and significant risks. When evaluating those risks in policymaking, there is a tendency to focus on social acceptance. By solely focusing on social acceptance, we could, however, overlook important ethical aspects of technological risk, particularly when we evaluate technologies with transnational and intergenerational risks. I argue that good governance of risky technology requires analyzing both social acceptance and ethical acceptability. Conceptually, these two notions are mostly complementary. Social acceptance studies are not capable of sufficiently capturing all the morally relevant features of risky technologies; ethical analyses do not typically include stakeholders' opinions, and they therefore lack the relevant empirical input for a thorough ethical evaluation. Only when carried out in conjunction are these two types of analysis relevant to national and international governance of risky technology. I discuss the Rawlsian wide reflective equilibrium as a method for marrying social acceptance and ethical acceptability. Although the rationale of my argument is broadly applicable, I will examine the case of multinational nuclear waste repositories in particular. This example will show how ethical issues may be overlooked if we focus only on social acceptance, and will provide a test case for demonstrating how the wide reflective equilibrium can help to bridge the proverbial acceptance-acceptability gap. © 2016 The Authors Risk Analysis published by Wiley Periodicals, Inc. on behalf of Society for Risk Analysis.

  3. User requirements and user acceptance of current and next-generation satellite mission and sensor complement, oriented toward the monitoring of water resources

    Science.gov (United States)

    Castruccio, P. A.; Loats, H. L., Jr.; Fowler, T. R.; Robinson, P.

    1975-01-01

    Principal water resources users were surveyed to determine the applicability of remotely sensed data to their present and future requirements. Analysis of responses was used to assess the levels of adequacy of LANDSAT 1 and 2 in fulfilling hydrological functions, and to derive systems specifications for future water resources-oriented remote sensing satellite systems. The analysis indicates that water resources applications for all but the very large users require: (1) resolutions on the order of 15 meters, (2) a number of radiometric levels of the same order as currently used in LANDSAT 1 (64), (3) a number of spectral bands not in excess of those used in LANDSAT 1, and (4) a repetition frequency on the order of 2 weeks. The users had little feel for the value of new sensors (thermal IR, passive and active microwaves). What is needed in this area is to achieve specific demonstrations of the utility of these sensors and submit the results to the users to evince their judgement.

  4. Mixed waste certification plan for the Lawrence Berkeley Laboratory Hazardous Waste Handling Facility. Revision 1

    International Nuclear Information System (INIS)

    1995-01-01

    The purpose of this plan is to describe the organization and methodology for the certification of mixed waste handled in the Hazardous Waste Handling Facility (HWHF) at Lawrence Berkeley Laboratory (LBL). This plan is composed to meet the requirements found in the Westinghouse Hanford Company (WHC) Solid Waste Acceptance Criteria (WAC) and follows the suggested outline provided by WHC in the letter of April 26, 1990, to Dr. R.H. Thomas, Occupational Health Division, LBL. Mixed waste is to be transferred to the WHC Hanford Site Central Waste Complex and Burial Grounds in Hanford, Washington

  5. Low-level waste certification plan for the Lawrence Berkeley Laboratory Hazardous Waste Handling Facility. Revision 1

    International Nuclear Information System (INIS)

    1995-01-01

    The purpose of this plan is to describe the organization and methodology for the certification of low-level radioactive waste (LLW) handled in the Hazardous Waste Handling Facility (HWHF) at Lawrence Berkeley Laboratory (LBL). This plan is composed to meet the requirements found in the Westinghouse Hanford Company (WHC) Solid Waste Acceptance Criteria (WAC) and follows the suggested outline provided by WHC in the letter of April 26, 1990, to Dr. R.H. Thomas, Occupational Health Division, LBL. LLW is to be transferred to the WHC Hanford Site Central Waste Complex and Burial Grounds in Hanford, Washington

  6. Low-level waste certification plan for the Lawrence Berkeley Laboratory Hazardous Waste Handling Facility. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-10

    The purpose of this plan is to describe the organization and methodology for the certification of low-level radioactive waste (LLW) handled in the Hazardous Waste Handling Facility (HWHF) at Lawrence Berkeley Laboratory (LBL). This plan is composed to meet the requirements found in the Westinghouse Hanford Company (WHC) Solid Waste Acceptance Criteria (WAC) and follows the suggested outline provided by WHC in the letter of April 26, 1990, to Dr. R.H. Thomas, Occupational Health Division, LBL. LLW is to be transferred to the WHC Hanford Site Central Waste Complex and Burial Grounds in Hanford, Washington.

  7. Nitrogen trailer acceptance test report

    International Nuclear Information System (INIS)

    Kostelnik, A.J.

    1996-01-01

    This Acceptance Test Report documents compliance with the requirements of specification WHC-S-0249. The equipment was tested according to WHC-SD-WM-ATP-108 Rev.0. The equipment being tested is a portable contained nitrogen supply. The test was conducted at Norco's facility

  8. Public acceptance of small reactors

    International Nuclear Information System (INIS)

    McDougall, D.S.

    1997-01-01

    The success of any nuclear program requires acceptance by the local public and all levels of government involved in the decision to initiate a reactor program. Public acceptance of a nuclear energy source is a major challenge in successful initiation of a small reactor program. In AECL's experience, public acceptance will not be obtained until the public is convinced that the specific nuclear program is needed, safe and economic and environmental benefit to the community. The title of public acceptance is misleading. The objective of the program is a fully informed public. The program proponent cannot force public acceptance, which is beyond his control. He can, however, ensure that the public is informed. Once information has begun to flow to the public by various means as will be explained later, the proponent is responsible to ensure that the information that is provided by him and by others is accurate. Most importantly, and perhaps most difficult to accomplish, the proponent must develop a consultative process that allows the proponent and the public to agree on actions that are acceptable to the proponent and the community

  9. Responsible technology acceptance

    DEFF Research Database (Denmark)

    Toft, Madeleine Broman; Schuitema, Geertje; Thøgersen, John

    2014-01-01

    As a response to climate change and the desire to gain independence from imported fossil fuels, there is a pressure to increase the proportion of electricity from renewable sources which is one of the reasons why electricity grids are currently being turned into Smart Grids. In this paper, we focus...... on private consumers’ acceptance of having Smart Grid technology installed in their home. We analyse acceptance in a combined framework of the Technology Acceptance Model and the Norm Activation Model. We propose that individuals are only likely to accept Smart Grid technology if they assess usefulness...... in terms of a positive impact for society and the environment. Therefore, we expect that Smart Grid technology acceptance can be better explained when the well-known technology acceptance parameters included in the Technology Acceptance Model are supplemented by moral norms as suggested by the Norm...

  10. Nevada Test Site Waste Acceptance Criteria (NTSWAC)

    Energy Technology Data Exchange (ETDEWEB)

    NNSA/NSO Waste Management Project

    2008-06-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive (LLW) and LLW Mixed Waste (MW) for disposal.

  11. Acceptance test procedure for Project W-280

    International Nuclear Information System (INIS)

    Stites, C.G.

    1994-01-01

    This Document is the Acceptance Test Procedure for 200 Area C and SY Tank Farm Lighting Upgrade. This Acceptance Test Procedure has been prepared to demonstrate that the Tank Farm Lighting Systems function correctly as required by project criteria and as intended by design

  12. Nevada Test Site Waste Acceptance Criteria (NTSWAC)

    International Nuclear Information System (INIS)

    NNSA/NSO Waste Management Project

    2008-01-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive (LLW) and LLW Mixed Waste (MW) for disposal

  13. Nuclear Energy and Public Acceptance

    International Nuclear Information System (INIS)

    Daifuku, K.

    2002-01-01

    The continued use of nuclear power in the European Union and elsewhere requires an adequate level of public and political acceptance. A lack of acceptance is often mistakenly cited as a reason for the slowdown in nuclear power plant construction in Western Europe and as a justification for abandoning nuclear power. In fact, the reasons for the slowdown have more to do with the following two factors: Plentiful supplies of low-priced natural gas, making gas-fired power plants a more attractive investment choice; more than adequate supplies of electricity which have curbed the need for the construction of new plant of any kind. In general, moves towards a withdrawal from nuclear in certain Community countries have been due to party political pressures and have not been a response to public opposition to nuclear. In addition, opinion polls do not show widespread public opposition to the use of nuclear power. Figures consistently indicate that the use of nuclear power does not come high on the list of most people's main worries. Their main concerns focus on other issues such as crime and financial problems. In the main, electricity is taken for granted in the industrialised world. Electric power only becomes an issue when there is a threat of shortages. So if public acceptance is not the main obstacle, what is? Political acceptance is an integral part of the process in which nuclear becomes acceptable or not. The relationship between public and political acceptance and the role of the industry in this context, on how to foster a better trialogue, will be examined. (author)

  14. MITS Data Acquisition Subsystem Acceptance Test procedure

    International Nuclear Information System (INIS)

    Allison, R.

    1980-01-01

    This is an acceptance procedure for the Data Acquisition Subsystem of the Machine Interface Test System (MITS). Prerequisites, requirements, and detailed step-by-step instruction are presented for inspecting and performance testing the subsystem

  15. Nevada Test Site Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    U.S. Department of Energy, Nevada Operations Office, Waste Acceptance Criteria

    1999-01-01

    This document provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the Nevada Test Site

  16. Acceptance procedures: Microfilm printer

    Science.gov (United States)

    Lockwood, H. E.

    1973-01-01

    Acceptance tests were made for a special order automatic additive color microfilm printer. Tests include film capacity, film transport, resolution, illumination uniformity, exposure range checks, and color cuing considerations.

  17. On risks and acceptability

    International Nuclear Information System (INIS)

    Watson, S.R.

    1981-01-01

    A very attractive notion is that it should be possible not only to determine how much risk is associated with any particular activity, but also to determine if that risk is acceptable. Stated boldly this seems an entirely unobjectionable and indeed a very acceptable notion. There is, however, underlying this idea, a mistaken view of risk which we might refer to as the ''phlogiston'' theory of risk. In this paper, presented at the SRP meeting on Ethical and Legal Aspects of Radiological Protection, the phlogiston theory of risk is described; secondly, it will be argued that it is too simple a theory to be realistic or useful; and thirdly, the management of risk will be placed in a wider decision framework. Acceptability, it will be argued is highly dependent on context, and it is not possible, therefore, to lay down generally applicable notions of acceptability. (author)

  18. Hanford Site Solid Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-17

    This manual defines the Hanford Site radioactive, hazardous, and sanitary solid waste acceptance criteria. Criteria in the manual represent a guide for meeting state and federal regulations; DOE Orders; Hanford Site requirements; and other rules, regulations, guidelines, and standards as they apply to acceptance of radioactive and hazardous solid waste at the Hanford Site. It is not the intent of this manual to be all inclusive of the regulations; rather, it is intended that the manual provide the waste generator with only the requirements that waste must meet in order to be accepted at Hanford Site TSD facilities.

  19. Hanford Site Solid Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    1993-01-01

    This manual defines the Hanford Site radioactive, hazardous, and sanitary solid waste acceptance criteria. Criteria in the manual represent a guide for meeting state and federal regulations; DOE Orders; Hanford Site requirements; and other rules, regulations, guidelines, and standards as they apply to acceptance of radioactive and hazardous solid waste at the Hanford Site. It is not the intent of this manual to be all inclusive of the regulations; rather, it is intended that the manual provide the waste generator with only the requirements that waste must meet in order to be accepted at Hanford Site TSD facilities

  20. NEVADA TEST SITE WASTE ACCEPTANCE CRITERIA

    International Nuclear Information System (INIS)

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION, NEVADA SITE OFFICE

    2005-01-01

    This document establishes the U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive and mixed waste for disposal. Mixed waste generated within the State of Nevada by NNSA/NSO activities is accepted for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Site for storage or disposal

  1. Acceptable noise level

    DEFF Research Database (Denmark)

    Olsen, Steen Østergaard; Nielsen, Lars Holme; Lantz, Johannes

    2012-01-01

    The acceptable noise level (ANL) is used to quantify the amount of background noise that subjects can accept while listening to speech, and is suggested for prediction of individual hearing-aid use. The aim of this study was to assess the repeatability of the ANL measured in normal-hearing subjects...... using running Danish and non-semantic speech materials as stimuli and modulated speech-spectrum and multi-talker babble noises as competing stimuli....

  2. Operations Acceptance Management

    OpenAIRE

    Suchá, Ivana

    2010-01-01

    This paper examines the process of Operations Acceptance Management, whose main task is to control Operations Acceptance Tests (OAT). In the first part the author focuses on the theoretical ground for the problem in the context of ITSM best practices framework ITIL. Benefits, process pitfalls and possibilities for automation are discussed in this part. The second part contains a case study of DHL IT Services (Prague), where a solution optimizing the overall workflow was implemented using simp...

  3. Acceptable noise level

    DEFF Research Database (Denmark)

    Olsen, Steen Østergaard; Nielsen, Lars Holme; Lantz, Johannes

    2012-01-01

    The acceptable noise level (ANL) is used to quantify the amount of background noise that subjects can accept while listening to speech, and is suggested for prediction of individual hearing-aid use. The aim of this study was to assess the repeatability of the ANL measured in normal-hearing subjec...... using running Danish and non-semantic speech materials as stimuli and modulated speech-spectrum and multi-talker babble noises as competing stimuli....

  4. Hanford Site solid waste acceptance criteria

    International Nuclear Information System (INIS)

    Ellefson, M.D.

    1998-01-01

    Order 5820.2A requires that each treatment, storage, and/or disposal facility (referred to in this document as TSD unit) that manages low-level or transuranic waste (including mixed waste and TSCA PCB waste) maintain waste acceptance criteria. These criteria must address the various requirements to operate the TSD unit in compliance with applicable safety and environmental requirements. This document sets forth the baseline criteria for acceptance of radioactive waste at TSD units operated by WMH. The criteria for each TSD unit have been established to ensure that waste accepted can be managed in a manner that is within the operating requirements of the unit, including environmental regulations, DOE Orders, permits, technical safety requirements, waste analysis plans, performance assessments, and other applicable requirements. Acceptance criteria apply to the following TSD units: the Low-Level Burial Grounds (LLBG) including both the nonregulated portions of the LLBG and trenches 31 and 34 of the 218-W-5 Burial Ground for mixed waste disposal; Central Waste Complex (CWC); Waste Receiving and Processing Facility (WRAP); and T Plant Complex. Waste from all generators, both from the Hanford Site and from offsite facilities, must comply with these criteria. Exceptions can be granted as provided in Section 1.6. Specific waste streams could have additional requirements based on the 1901 identified TSD pathway. These requirements are communicated in the Waste Specification Records (WSRds). The Hanford Site manages nonradioactive waste through direct shipments to offsite contractors. The waste acceptance requirements of the offsite TSD facility must be met for these nonradioactive wastes. This document does not address the acceptance requirements of these offsite facilities

  5. Public acceptance and public relations

    International Nuclear Information System (INIS)

    Tanaka, Yasumasa

    1977-01-01

    A set of problems are discussed, which must be studied before the public relations are dealt with. Firstly, the trade-off between energy and health must be considered. There were several ages in which the consideration on health took preference to the energy requirement in the past. For example, the use of coal in London was prohibited by the King's proclamation in 1,306. Secondly, the selection for the acceptance of atomic power development and utilization is based on the subjective susceptibility psychologically, and cannot be concluded only by the logical reasoning. Thirdly, the strict definition of ''national consensus'' is necessary. That is, whether does it mean pleviscite or mere mood. Fourthly, whether the atomic energy is free from the danger or death biologically or not. Fifthly, is there any method for discriminating the persons who accept atomic power from the persons who do not socially. Although the probability of death caused by atomic accidents is very small (one three hundred millionth a year), many peoples hate atomic power and oppose to the construction of nuclear power plants. Four reasons for this are considered: (1) social diffusion of innovation, (2) nuclear allergy, (3) shortage of the conception of risk-benefit, and (4) heterogeneity of the public. According to the investigation of the relationship between electric power and livelihood, carried out by the policy and science research institute in Tokyo, the highly subjective decision for the acceptance of atomic power is independent of the objective knowledge on atomic power. (Iwakiri, K.)

  6. From motivation to acceptability

    DEFF Research Database (Denmark)

    Nordfalk, Francisca; Olejaz, Maria; Jensen, Anja M. B.

    2016-01-01

    Background: Over the past three decades, public attitudes to organ donation have been a subject of numerous studies focusing on donor motivation. Here, we present a fresh approach. We suggest focusing on public acceptability instead of motivation. The point is to understand public attitudes well...

  7. Approaches to acceptable risk

    International Nuclear Information System (INIS)

    Whipple, C.

    1997-01-01

    Several alternative approaches to address the question open-quotes How safe is safe enough?close quotes are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, in a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made

  8. Waste acceptance and logistics

    International Nuclear Information System (INIS)

    Carlson, James H.

    1992-01-01

    There are three major components which are normally highlighted when the Civilian Radioactive Waste Management Program is discussed - the repository, the monitored retrievable storage facility, and the transportation system. These are clearly the major physical system elements and they receive the greatest external attention. However, there will not be a successful, operative waste management system without fully operational waste acceptance plans and logistics arrangements. This paper will discuss the importance of developing, on a parallel basis to the normally considered waste management system elements, the waste acceptance and logistics arrangements to enable the timely transfer of spent nuclear fuel from more than one hundred and twenty waste generators to the Federal government. The paper will also describe the specific activities the Program has underway to make the necessary arrangements. (author)

  9. DISPOSABLE CANISTER WASTE ACCEPTANCE CRITERIA

    Energy Technology Data Exchange (ETDEWEB)

    R.J. Garrett

    2001-07-30

    The purpose of this calculation is to provide the bases for defining the preclosure limits on radioactive material releases from radioactive waste forms to be received in disposable canisters at the Monitored Geologic Repository (MGR) at Yucca Mountain. Specifically, this calculation will provide the basis for criteria to be included in a forthcoming revision of the Waste Acceptance System Requirements Document (WASRD) that limits releases in terms of non-isotope-specific canister release dose-equivalent source terms. These criteria will be developed for the Department of Energy spent nuclear fuel (DSNF) standard canister, the Multicanister Overpack (MCO), the naval spent fuel canister, the High-Level Waste (HLW) canister, the plutonium can-in-canister, and the large Multipurpose Canister (MPC). The shippers of such canisters will be required to demonstrate that they meet these criteria before the canisters are accepted at the MGR. The Quality Assurance program is applicable to this calculation. The work reported in this document is part of the analysis of DSNF and is performed using procedure AP-3.124, Calculations. The work done for this analysis was evaluated according to procedure QAP-2-0, Control of Activities, which has been superseded by AP-2.21Q, Quality Determinations and Planning for Scientific, Engineering, and Regulatory Compliance Activities. This evaluation determined that such activities are subject to the requirements of DOE/RW/0333P, Quality Assurance Requirements and Description (DOE 2000). This work is also prepared in accordance with the development plan titled Design Basis Event Analyses on DOE SNF and Plutonium Can-In-Canister Waste Forms (CRWMS M&O 1999a) and Technical Work Plan For: Department of Energy Spent Nuclear Fuel Work Packages (CRWMS M&O 2000d). This calculation contains no electronic data applicable to any electronic data management system.

  10. Environment and public acceptance

    International Nuclear Information System (INIS)

    Gauvenet; Bresson; Braillard; Ertaud; Ladonchamps, de; Toureau

    1976-01-01

    The problems involved in the siting of nuclear power stations at a local level are of a political economic, social or ecological order. The acceptance of a nuclear station mostly depends on its interest for the local population. In order to avoid negative reactions, the men who are responsible must make the harmonious integration of the station within the existing economic and social context their first priority [fr

  11. Nuclear power and acceptation

    International Nuclear Information System (INIS)

    Speelman, J.E.

    1990-01-01

    In 1989 a workshop was held organized by the IAEA and the Argonne National Laboratory. The purpose was to investigate under which circumstances a large-scale extension of nuclear power can be accepted. Besides the important technical information, the care for the environment determined the atmosphere during the workshop. The opinion dominated that nuclear power can contribute in tackling the environment problems, but that the social and political climate this almost makes impossible. (author). 7 refs.; 1 fig.; 1 tab

  12. Age and Acceptance of Euthanasia.

    Science.gov (United States)

    Ward, Russell A.

    1980-01-01

    Study explores relationship between age (and sex and race) and acceptance of euthanasia. Women and non-Whites were less accepting because of religiosity. Among older people less acceptance was attributable to their lesser education and greater religiosity. Results suggest that quality of life in old age affects acceptability of euthanasia. (Author)

  13. Nevada Test Site Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office

    2005-01-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive (LLW) and mixed waste (MW) for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex (RWMC) for storage or disposal

  14. Den betingede accept

    DEFF Research Database (Denmark)

    Kolind, Torsten

    1999-01-01

    The article focus on aspects of identity and social order in relation to the interaction between ‘normals' and ex-prisoners, that is, ex-prisoners, who wants to live a normal life without criminality. It is argued, that this interaction and the normality that the ex-prisoner is granted often......, on the surface, can look rather unproblematic, but that it, none the less, is ruled by, what the author calls the conditioned accept. That is, the ex-prisoner should see himself as normal, at the same time that he withdraw from those situations, practices and attitude where the normals would have difficulties...

  15. Baby-Crying Acceptance

    Science.gov (United States)

    Martins, Tiago; de Magalhães, Sérgio Tenreiro

    The baby's crying is his most important mean of communication. The crying monitoring performed by devices that have been developed doesn't ensure the complete safety of the child. It is necessary to join, to these technological resources, means of communicating the results to the responsible, which would involve the digital processing of information available from crying. The survey carried out, enabled to understand the level of adoption, in the continental territory of Portugal, of a technology that will be able to do such a digital processing. It was used the TAM as the theoretical referential. The statistical analysis showed that there is a good probability of acceptance of such a system.

  16. Acceptance, Tolerance, Participation

    International Nuclear Information System (INIS)

    1993-01-01

    The problem of radioactive waste management from an ethical and societal viewpoint was treated in this seminar, which had participants from universities (social, theological, philosophical and science institutes), waste management industry, and regulatory and controlling authorities. After initial reviews on repository technology, policies and schedules, knowledge gaps, and ethical aspects on decision making under uncertainty, four subjects were treated in lectures and discussions: Democratic collective responsibility, Handling threats in democratic decision making, Waste management - a technological operation with a social dimension, Acceptance and legitimity. Lectures with comments and discussions are collected in this report

  17. Marketing for Acceptance

    Directory of Open Access Journals (Sweden)

    Tina L. Johnston, Ph.D.

    2009-11-01

    Full Text Available Becoming a researcher comes with the credentializing pressure to publish articles in peer-reviewed journals (Glaser, 1992; Glaser, 2007; Glaser, 2008. The work intensive process is exacerbated when the author’s research method is grounded theory. This study investigated the concerns of early and experienced grounded theorists to discover how they worked towards publishing research projects that applied grounded theory as a methodology. The result was a grounded theory of marketing for acceptance that provides the reader with insight into ways that classic grounded theorists have published their works. This is followed by a discussion of ideas for normalizing classic grounded theory research methods in our substantive fields.

  18. Wind energy and social acceptability

    International Nuclear Information System (INIS)

    Feurtey, E.

    2008-01-01

    This document was prepared as part of a decentralized collaboration between Quebec and France to share knowledge regarding strategies and best practices in wind power development. It reviewed the social acceptance of Quebec's wind power industry, particularly at the municipal level. The wind industry is growing rapidly in Quebec, and this growth has generated many reactions ranging from positive to negative. The purpose of this joint effort was to describe decision making steps to developing a wind turbine array. The history of wind development in Quebec was discussed along with the various hardware components required in a wind turbine and different types of installations. The key element in implementing wind turbine arrays is to establish public acceptance of the project, followed by a good regulatory framework to define the roles and responsibilities of participants. The production of electricity from wind turbines constitutes a clean and renewable source of energy. Although it is associated with a reduction in greenhouse gas emissions, this form of energy can also have negative environmental impacts, including noise. The revenues generated by wind parks are important factors in the decision making process. Two case studies in Quebec were presented. refs., tabs., figs.

  19. Policy formulation of public acceptance

    International Nuclear Information System (INIS)

    Kasai, Akihiro

    1978-01-01

    Since 1970, the new policy formulation for public acceptance of the new consideration on the location of electric power generation has been set and applied. The planning and the enforcement being conducted by local public organizations for the local economic build-up with plant location and also the adjustement of the requirements for fishery are two main specific characters in this new policy. The background of this new public acceptance policy, the history and the actual problems about the compensation for the location of power generation plants are reviewed. One new proposal, being recommended by the Policy and Science Laboratory to MITI in 1977 is explained. This is based on the method of promoting the location of power generation plants by public participation placing the redevelopment of regional societies as its basis. The problems concerning the industrial structures in farm villages, fishing villages and the areas of commerce and industry should be systematized, and explained from the viewpoint of outside impact, the characteristics of local areas and the location problems in this new proposal. Finally, the location process and its effectiveness should be put in order. (Nakai, Y.)

  20. Nevada Test Site Waste Acceptance Criteria, December 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-12-01

    This document establishes the US Department of Energy, Nevada Operations Office waste acceptance criteria. The waste acceptance criteria provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive waste and mixed waste for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Sites for storage or disposal.

  1. Nevada Test Site Waste Acceptance Criteria, December 2000

    International Nuclear Information System (INIS)

    2000-01-01

    This document establishes the US Department of Energy, Nevada Operations Office waste acceptance criteria. The waste acceptance criteria provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive waste and mixed waste for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Sites for storage or disposal

  2. Guidelines for generators of hazardous chemical waste at LBL and Guidelines for generators of radioactive and mixed waste at LBL

    International Nuclear Information System (INIS)

    1991-07-01

    The purpose of this document is to provide the acceptance criteria for the transfer of hazardous chemical, radioactive, and mixed waste to Lawrence Berkeley Laboratory's (LBL) Hazardous Waste Handling Facility (HWHF). These guidelines describe how a generator of wastes can meet LBL's acceptance criteria for hazardous chemical, radioactive, and mixed waste. 9 figs

  3. Structural acceptance criteria Remote Handling Building Tritium Extraction Facility

    Energy Technology Data Exchange (ETDEWEB)

    Mertz, G.

    1999-12-16

    This structural acceptance criteria contains the requirements for the structural analysis and design of the Remote Handling Building (RHB) in the Tritium Extraction Facility (TEF). The purpose of this acceptance criteria is to identify the specific criteria and methods that will ensure a structurally robust building that will safely perform its intended function and comply with the applicable Department of Energy (DOE) structural requirements.

  4. Structural acceptance criteria Remote Handling Building Tritium Extraction Facility

    International Nuclear Information System (INIS)

    Mertz, G.

    1999-01-01

    This structural acceptance criteria contains the requirements for the structural analysis and design of the Remote Handling Building (RHB) in the Tritium Extraction Facility (TEF). The purpose of this acceptance criteria is to identify the specific criteria and methods that will ensure a structurally robust building that will safely perform its intended function and comply with the applicable Department of Energy (DOE) structural requirements

  5. PAGs - Public perception and acceptance

    International Nuclear Information System (INIS)

    Quillin, Robert M.

    1989-01-01

    Full text: While Protective Action Guides or PAGs have been a part of the lexicon of the radiation protection field for several decades, the concept of accepting higher levels of risk under certain situations has not received adequate scrutiny by the general public, the media or elected officials. Consequently there is a question as to how implementation of PAGs would be perceived by the above groups in the event that such implementation became necessary. A personal case in point involves the response of an executive in the food industry. When the concept of selling a food product meeting the PAGs was explained his response was, 'we won't sell a contaminated product, we would dump the unprocessed raw food. Our industry image is that of a natural unadulterated food'. While this may be an isolated view, there is a need to determine what is the perception and consequently what would be the response if PAGs were implemented today. If the response was negative by anyone of the three groups listed previously, then there is an obvious need for a program to assure receptiveness by those concerned. However, this may face formidable obstacles. This is because the terms radiation and radioactive have gained generally negative word associations, e.g. 'deadly' radiation and radioactive 'desert'. The former term was recently heard in a taped presentation at a Museum of Natural History on a completely unrelated subject. The latter term was part of a recent article heading in the Wall Street Journal. Incidentally the article was discussing television. Thus beyond the scientific issues of setting PAGs and the administrative and procedural issues of implementing PAGs there is the issue of society's understanding and acceptance of PAGs. Particularly, how can such understanding and acceptance be achieved in a situation which is associated with an actual or perceived radiation emergency? These are not questions that radiation or agricultural scientists can answer alone. These are

  6. W-087 Acceptance test procedure. Revision 1

    International Nuclear Information System (INIS)

    Joshi, A.W.

    1997-01-01

    This Acceptance Test Procedure/Operational Test Procedure (ATP/OTP) has been prepared to demonstrate that the Electrical/Instrumentation and Mechanical systems function as required by project criteria and to verify proper operation of the integrated system including the interlocks

  7. W-087 Acceptance test procedure. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Joshi, A.W.

    1997-06-10

    This Acceptance Test Procedure/Operational Test Procedure (ATP/OTP) has been prepared to demonstrate that the Electrical/Instrumentation and Mechanical systems function as required by project criteria and to verify proper operation of the integrated system including the interlocks.

  8. Generator acceptance test and inspection report

    International Nuclear Information System (INIS)

    Johns, B.R.

    1997-01-01

    This Acceptance Test Report(ATR) is the completed testing and inspection of the new portable generator. The testing and inspection is to verify that the generator provided by the vendor meets the requirements of specification WHC-S-0252, Revision 2. Attached is various other documentation to support the inspection and testing

  9. Public acceptance of nuclear power

    International Nuclear Information System (INIS)

    Wildgruber, O.H.

    1990-01-01

    The lecture addresses the question why we need public acceptance work and provides some clues to it. It explains various human behaviour patterns which determine the basics for public acceptance. To some extent, the opposition to nuclear energy and the role the media play are described. Public acceptance efforts of industry are critically reviewed. Some hints on difficulties with polling are provided. The lecture concludes with recommendations for further public acceptance work. (author)

  10. HPS simulation and acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Mundim, Luiz Martins [UERJ, Rio de Janeiro, RJ (Brazil); Pol, Maria Elena [CBPF, Rio de Janeiro, RJ (Brazil)

    2013-07-01

    Full text: The High Precision Spectrometer (HPS) is a proposal of sub-detector to be installed in the region of 200-240m from each side of CMS along the LHC beam-line to measure scattered protons from exclusive centrally produced processes, pp → p + X + p. In order to study the protons that reach the detectors, the beam-line of the LHC accelerator has to be taken into account, as the particles are deflected by dipoles and suffer the influence of quadrupoles and other beam devices. The LHC team provides a detailed description of these elements, currents, energies, magnetic fields, and all the information needed to study the propagation of the protons. The program HECTOR, developed at the University of Louvain, uses the information from LHC to calculate at any point along the beam-line the kinematic quantities that characterize the scattered protons. A simple minded program was initially developed for the preliminary studies of acceptances varying the position and size of the foreseen detectors. Also, it took into account vertex and position smearing, to simulate a realistic resolution of the tracking detectors. These studies were performed using a particle gun generator which shoot protons from the IP within reasonable ranges of possible t and ξ (the square of the four-momentum transfer and the fractional energy loss of the outgoing proton in a diffractive collision), and propagated them to the position of the tracking detectors. These kinematic quantities were reconstructed back at the IP using the transport equations from HECTOR. This simplified simulation was afterwards interfaced with the full software of CMS, CMSSW, in such a way that when a diffractive event was fully simulated and reconstructed in the central detector, the outgoing protons were treated by the HPS software and then the complete (CMS+HPS) event was output. The ExHuME generator was used to produce Monte Carlo simulations to study the mass acceptance of the HPS detector, and central and

  11. Acceptance of spent fuel of varying characteristics

    International Nuclear Information System (INIS)

    Short, S.M.

    1990-03-01

    This paper is a preliminary overview of a study with the primary objective of establishing a set of acceptance selection criteria and corresponding spent fuel characteristics to be incorporated as a component of requirements for the Federal Waste Management System (FWMS). A number of alternative acceptance allocations and selection rules were analyzed to determine the operational sensitivity of each element of the FWMS to the resultant spent fuel characteristics. Preliminary recommendations of the study include three different sets of selection rules to be included in the FWMS design basis. 2 refs., 4 figs., 4 tabs

  12. Nevada National Security Site Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-06-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept the following: • DOE hazardous and non-hazardous non-radioactive classified waste • DOE low-level radioactive waste (LLW) • DOE mixed low-level waste (MLLW) • U.S. Department of Defense (DOD) classified waste The LLW and MLLW listed above may also be classified waste. Classified waste is the only waste accepted for disposal that may be non-radioactive and shall be required to meet the waste acceptance criteria for radioactive waste as specified in this document. Classified waste may be sent to the NNSS as classified matter. Section 3.1.18 provides the requirements that must be met for permanent burial of classified matter. The NNSA/NFO and support contractors are available to assist the generator in understanding or interpreting this document. For assistance, please call the NNSA/NFO Environmental Management Operations (EMO) at (702) 295-7063, and the call will be directed to the appropriate contact.

  13. Nevada National Security Site Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    2013-01-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept the following: DOE hazardous and non-hazardous non-radioactive classified waste; DOE low-level radioactive waste (LLW); DOE mixed low-level waste (MLLW); and, U.S. Department of Defense (DOD) classified waste. The LLW and MLLW listed above may also be classified waste. Classified waste is the only waste accepted for disposal that may be non-radioactive and shall be required to meet the waste acceptance criteria for radioactive waste as specified in this document. Classified waste may be sent to the NNSS as classified matter. Section 3.1.18 provides the requirements that must be met for permanent burial of classified matter. The NNSA/NFO and support contractors are available to assist the generator in understanding or interpreting this document. For assistance, please call the NNSA/NFO Environmental Management Operations (EMO) at (702) 295-7063, and the call will be directed to the appropriate contact.

  14. Nevada test site waste acceptance criteria

    International Nuclear Information System (INIS)

    1996-01-01

    This document provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the NTS. Review each section of this document. This document is not intended to include all of the requirements; rather, it is meant as a guide toward meeting the regulations. All references in this document should be observed to avoid omission of requirements on which acceptance or rejection of waste will be based. The Department of Energy/Nevada Operations Office (DOE/NV) and support contractors are available to assist you in understanding or interpreting this document

  15. Nevada test site waste acceptance criteria

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    This document provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the NTS. Review each section of this document. This document is not intended to include all of the requirements; rather, it is meant as a guide toward meeting the regulations. All references in this document should be observed to avoid omission of requirements on which acceptance or rejection of waste will be based. The Department of Energy/Nevada Operations Office (DOE/NV) and support contractors are available to assist you in understanding or interpreting this document.

  16. ISLA: An Isochronous Spectrometer with Large Acceptances

    Energy Technology Data Exchange (ETDEWEB)

    Bazin, D., E-mail: bazin@nscl.msu.edu; Mittig, W.

    2013-12-15

    A novel type of recoil mass spectrometer and separator is proposed for the future secondary radioactive beams of the ReA12 accelerator at NSCL/FRIB, inspired from the TOFI spectrometer developed at the Los Alamos National Laboratory for online mass measurements. The Isochronous Spectrometer with Large Acceptances (ISLA) is able to achieve superior characteristics without the compromises that usually plague the design of large acceptance spectrometers. ISLA can provide mass-to-charge ratio (m/q) measurements to better than 1 part in 1000 by using an optically isochronous time-of-flight independent of the momentum vector of the recoiling ions, despite large acceptances of 20% in momentum and 64 msr in solid angle. The characteristics of this unique design are shown, including requirements for auxiliary detectors around the target and the various types of reactions to be used with the re-accelerated radioactive beams of the future ReA12 accelerator.

  17. Acceptance test procedure for core sample trucks

    International Nuclear Information System (INIS)

    Smalley, J.L.

    1995-01-01

    The purpose of this Acceptance Test Procedure is to provide instruction and documentation for acceptance testing of the rotary mode core sample trucks, HO-68K-4600 and HO-68K-4647. The rotary mode core sample trucks were based upon the design of the second core sample truck (HO-68K-4345) which was constructed to implement rotary mode sampling of the waste tanks at Hanford. Acceptance testing of the rotary mode core sample trucks will verify that the design requirements have been met. All testing will be non-radioactive and stand-in materials shall be used to simulate waste tank conditions. Compressed air will be substituted for nitrogen during the majority of testing, with nitrogen being used only for flow characterization

  18. Environmental Restoration Disposal Facility Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    Dronen, V.R.

    1998-06-01

    The Hanford Site is operated by the U. S. Department of Energy (DOE) with a primary mission of environmental cleanup and restoration. The Environmental Restoration Disposal Facility (ERDF) is an integral part of the DOE environmental restoration effort at the Hanford Site. The purpose of this document is to establish the ERDF waste acceptance criteria for disposal of materials resulting from Hanford Site cleanup activities. Definition of and compliance with the requirements of this document will enable implementation of appropriate measures to protect human health and the environment, ensure the integrity of the ERDF liner system, facilitate efficient use of the available space in the ERDF, and comply with applicable environmental regulations and DOE orders. To serve this purpose, the document defines responsibilities, identifies the waste acceptance process, and provides the primary acceptance criteria and regulatory citations to guide ERDF users. The information contained in this document is not intended to repeat or summarize the contents of all applicable regulations

  19. American acceptance of nuclear power

    International Nuclear Information System (INIS)

    Barrett, W.

    1980-01-01

    The characteristic adventurous spirit that built American technology will eventually lead to American acceptance of nuclear power unless an overpowering loss of nerve causes us to reject both nuclear technology and world leadership. The acceptance of new technology by society has always been accompanied by activist opposition to industralization. To resolve the debate between environmental and exploitive extremists, we must accept with humility the basic premise that human accomplishment is a finite part of nature

  20. Tacit acceptance of the succession

    Directory of Open Access Journals (Sweden)

    Ioana NICOLAE

    2012-01-01

    Full Text Available This paper examines some essential and contradictory aspects regarding the issue of tacit acceptance of succession in terms of distinction between documents valuing tacit acceptance of succession and other acts that would not justify such a solution. The documents expressly indicated by the legislator as having tacit acceptance value as well as those which do not have such value are presented and their most important legal effects are examined and discussed.

  1. Validation, acceptance and licensing

    International Nuclear Information System (INIS)

    Wene, C.O.

    1992-01-01

    The licensing process requires communication of complex scientific and technical information. In this paper transfer of such information is discussed using concepts and ideas from systems analysis, cybernetics and argumentation theory. A simple model for the decision process is developed. The analysis stresses the need for careful design of the communication channels between the three systems involved: the political system, the judicial-regulatory system and the scientific-technical community. The Dialogue - Scenario project initiated by the Swedish nuclear Inspectorate is briefly presented

  2. Bridging the Gap between Social Acceptance and Ethical Acceptability

    NARCIS (Netherlands)

    Taebi, B.

    2016-01-01

    New technology brings great benefits, but it can also create new and significant risks. When evaluating those risks in policymaking, there is a tendency to focus on social acceptance. By solely focusing on social acceptance, we could, however, overlook important ethical aspects of technological

  3. Nevada National Security Site Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2012-02-28

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept DOE non-radioactive classified waste, DOE non-radioactive hazardous classified waste, DOE low-level radioactive waste (LLW), DOE mixed low-level waste (MLLW), and U.S. Department of Defense (DOD) classified waste for permanent disposal. Classified waste is the only waste accepted for disposal that may be non-radioactive and will be required to meet the waste acceptance criteria for radioactive waste as specified in this document. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project (WMP) at (702) 295-7063, and your call will be directed to the appropriate contact.

  4. Nevada National Security Site Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    2012-01-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept DOE non-radioactive classified waste, DOE non-radioactive hazardous classified waste, DOE low-level radioactive waste (LLW), DOE mixed low-level waste (MLLW), and U.S. Department of Defense (DOD) classified waste for permanent disposal. Classified waste is the only waste accepted for disposal that may be non-radioactive and will be required to meet the waste acceptance criteria for radioactive waste as specified in this document. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project (WMP) at (702) 295-7063, and your call will be directed to the appropriate contact.

  5. Hazardous Waste Cerification Plan: Hazardous Waste Handling Facility, Lawrence Berkeley Laboratory

    International Nuclear Information System (INIS)

    1992-02-01

    The purpose of this plan is to describe the organization and methodology for the certification of hazardous waste (HW) handled in the Lawrence Berkeley Laboratory (LBL) Hazardous Waste Handling Facility (HWHF). The plan also incorporates the applicable elements of waste reduction, which include both up-front minimization and end- product treatment to reduce the volume and toxicity of the waste; segregation of the waste as it applies to certification; and executive summary of the Quality Assurance Program Plan (QAPP) for the HWHF and a list of the current and planned implementing procedures used in waste certification. The plan provides guidance from the HWHF to waste generators, waste handlers, and the Systems Group Manager to enable them to conduct their activities and carry out their responsibilities in a manner that complies with several requirements of the Federal Resource Conservation and Resource Recovery Act (RCRA), the Federal Department of Transportation (DOT), and the State of California, Code of Regulations (CCR), Title 22

  6. User acceptance testing a step-by-step guide

    CERN Document Server

    Hambling, Brian

    2013-01-01

    Every information system brought into service in every type of organisation requires user acceptance testing. This book is a hands-on manual for non-testing specialists to plan and carry out an effective acceptance test of an information system. It also identifies ways of making the process as simple and cost-effective as possible.

  7. Nevada National Security Site Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2010-09-03

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  8. Nevada National Security Site Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    2010-01-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  9. Nevada National Security Site Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    2011-01-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  10. Cone penetrometer acceptance test report

    Energy Technology Data Exchange (ETDEWEB)

    Boechler, G.N.

    1996-09-19

    This Acceptance Test Report (ATR) documents the results of acceptance test procedure WHC-SD-WM-ATR-151. Included in this report is a summary of the tests, the results and issues, the signature and sign- off ATP pages, and a summarized table of the specification vs. ATP section that satisfied the specification.

  11. Acceptance conditions in automated negotiation

    NARCIS (Netherlands)

    Baarslag, T.; Hindriks, K.V.; Jonker, C.M.

    2011-01-01

    In every negotiation with a deadline, one of the negotiating parties has to accept an offer to avoid a break off. A break off is usually an undesirable outcome for both parties, therefore it is important that a negotiator employs a proficient mechanism to decide under which conditions to accept.

  12. Consumer Acceptance of Novel Foods

    NARCIS (Netherlands)

    Fischer, A.R.H.; Reinders, M.J.

    2016-01-01

    The success of novel foods depends to a considerable extent on whether consumers accept those innovations. This chapter provides an overview of current knowledge relevant to consumer acceptance of innovations in food. A broad range of theories and approaches to assess consumer response to

  13. Worldwide nuclear revival and acceptance

    International Nuclear Information System (INIS)

    Geraets, Luc H.; Crommelynck, Yves A.

    2009-01-01

    The current status and trends of the nuclear revival in Europe and abroad are outlined. The development of public opinion in the last decade is playing an important part. This has turned from clear rejection to careful acceptance. Transparency and open communication will be important aspects in the further development of nuclear acceptance. (orig.)

  14. Application of trial risk acceptance criteria

    International Nuclear Information System (INIS)

    Johnson, D.H.; Kastenberg, W.E.; Okrent, D.

    1982-01-01

    The objective of this paper is to investigate some of the implications inherent in the application of various proposed sets of risk acceptance criteria. A power-law model of risk aversion is utilized to estimate the equivalent number of individual deaths and is treated parametrically. The implications of ALARA requirements for cost-effective improvements are also illustrated. The risks assessed for various technological endeavors, as well as some estimated natural background risks, are compared to the trial criteria

  15. Diesel generator trailer acceptance test procedure

    International Nuclear Information System (INIS)

    Kostelnik, A.J.

    1994-01-01

    This Acceptance Test Procedure (ATP) will document compliance with the requirements of WHC-S-0252 Rev. 1 and ECNs 609271, and 609272. The equipment being tested is a 150KW Diesel Generator mounted on a trailer with switchgear. The unit was purchased as a Design and Fabrication procurement activity. The ATP was written by the Seller and will be performed by the Seller with representatives of the Westinghouse Hanford Company witnessing the test at the Seller's location

  16. Breathing air trailer acceptance test report

    International Nuclear Information System (INIS)

    Kostelnik, A.J.

    1996-01-01

    This Acceptance Test Report documents compliance with the requirements of specification WHC-S-0251, Rev.0 and ECNs 613530 and 606113. The equipment was tested according to WHC-SD-WM-ATP-104. The equipment tested is a Breathing Air Supply Trailer purchased as a design and fabrication procurement activity. The ATP was written by the Seller and was performed by the Seller with representatives of the Westinghouse Hanford Company witnessing portions of the test at the Seller's location

  17. Self-Reported Acceptance of Social Anxiety Symptoms: Development and Validation of the Social Anxiety-Acceptance and Action Questionnaire

    Science.gov (United States)

    MacKenzie, Meagan B.; Kocovski, Nancy L.

    2010-01-01

    Mindfulness and acceptance-based interventions have been used in social anxiety treatments with initial success. Further research requires the psychometrically sound measurement of mechanisms of change associated with these treatments. This research was conducted to develop and evaluate such a measure, the Social Anxiety-Acceptance and Action…

  18. 7 CFR 982.454 - Sureties acceptable to the Board.

    Science.gov (United States)

    2010-01-01

    ....454 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE HAZELNUTS... condition of accepting any surety, the Board may require such financial statements or other information...

  19. W-026, acceptance test report manipulator system

    International Nuclear Information System (INIS)

    Watson, T.L.

    1997-01-01

    The purpose of the WRAP Manipulator System Acceptance Test Plan (ATP) is to verify that the 4 glovebox sets of WRAP manipulator components, including rail/carriage, slave arm, master controller and auxiliary equipment, meets the requirements of the functional segments of 14590 specification. The demonstration of performance elements of the ATP are performed as a part of the Assembly specifications. Manipulator integration is integrated in the performance testing of the gloveboxes. Each requirement of the Assembly specification will be carried out in conjunction with glovebox performance tests

  20. Consumer acceptance of functional foods

    DEFF Research Database (Denmark)

    Frewer, Lynn J.; Scholderer, Joachim; Lambert, Nigel

    2003-01-01

    In the past, it has been assumed that consumers would accept novel foods if there is a concrete and tangible consumer benefit associated with them, which implies that those functional foods would quickly be accepted. However, there is evidence that individuals are likely to differ in the extent...... to which they are likely to buy products with particular functional properties. Various cross-cultural and demographic differences in acceptance found in the literature are reviewed, as well as barriers to dietary change. In conclusion, it is argued that understanding consumer's risk perceptions...

  1. Market Acceptance of Smart Growth

    Science.gov (United States)

    This report finds that smart growth developments enjoy market acceptance because of stability in prices over time. Housing resales in smart growth developments often have greater appreciation than their conventional suburban counterparts.

  2. L-286, Acceptance Test Record

    International Nuclear Information System (INIS)

    HARMON, B.C.

    2000-01-01

    This document provides a detailed account of how the acceptance testing was conducted for Project L-286, ''200E Area Sanitary Water Plant Effluent Stream Reduction''. The testing of the L-286 instrumentation system was conducted under the direct supervision

  3. Standards regulations and public acceptance

    International Nuclear Information System (INIS)

    Fernandez, E.C.

    1977-01-01

    Spanish nuclear legislation and the associated procedure for the authorization of installations is summarized. Public acceptance is discussed in the context of the needs for and hazards of nuclear energy. (U.K.)

  4. Patient acceptance of awake craniotomy.

    Science.gov (United States)

    Wrede, Karsten H; Stieglitz, Lennart H; Fiferna, Antje; Karst, Matthias; Gerganov, Venelin M; Samii, Madjid; von Gösseln, Hans-Henning; Lüdemann, Wolf O

    2011-12-01

    The aim of this study was to objectively assess the patients' acceptance for awake craniotomy in a group of neurosurgical patients, who underwent this procedure for removal of lesions in or close to eloquent brain areas. Patients acceptance for awake craniotomy under local anesthesia and conscious sedation was assessed by a formal questionnaire (PPP33), initially developed for general surgery patients. The results are compared to a group of patients who had brain surgery under general anesthesia and to previously published data. The awake craniotomy (AC) group consisted of 37 male and 9 female patients (48 craniotomies) with age ranging from 18 to 71 years. The general anesthesia (GA) group consisted of 26 male and 15 female patients (43 craniotomies) with age ranging from 26 to 83 years. All patients in the study were included in the questionnaire analysis. In comparison to GA the overall PPP33 score for AC was higher (p=0.07), suggesting better overall acceptance for AC. The subscale scores for AC were also significantly better compared to GA for the two subscales "postoperative pain" (p=0.02) and "physical disorders" (p=0.01) and equal for the other 6 subscales. The results of the overall mean score and the scores for the subscales of the PPP33 questionnaire verify good patients' acceptance for AC. Previous studies have shown good patients' acceptance for awake craniotomy, but only a few times using formal approaches. By utilizing a formal questionnaire we could verify good patient acceptance for awake craniotomy for the treatment of brain tumors in or close to eloquent areas. This is a novel approach that substantiates previously published experiences. Copyright © 2011 Elsevier B.V. All rights reserved.

  5. Text recycling: acceptable or misconduct?

    Science.gov (United States)

    Harriman, Stephanie; Patel, Jigisha

    2014-08-16

    Text recycling, also referred to as self-plagiarism, is the reproduction of an author's own text from a previous publication in a new publication. Opinions on the acceptability of this practice vary, with some viewing it as acceptable and efficient, and others as misleading and unacceptable. In light of the lack of consensus, journal editors often have difficulty deciding how to act upon the discovery of text recycling. In response to these difficulties, we have created a set of guidelines for journal editors on how to deal with text recycling. In this editorial, we discuss some of the challenges of developing these guidelines, and how authors can avoid undisclosed text recycling.

  6. Toward an acceptable nuclear future

    International Nuclear Information System (INIS)

    Weinberg, A.M.

    1977-11-01

    The nuclear option is in danger of being foreclosed. The trend toward antinuclearism may be reversed if concerns about low-level radiation insult can be shown ultimately to be without foundation; evidence for this speculation is presented. Nevertheless it is suggested that the nuclear enterprise itself must propose new initiatives to increase the acceptability of nuclear energy. A key element of an acceptable nuclear future is cluster siting of reactors. This siting plan might be achieved by confining new reactors essentially to existing sites

  7. Hanford Site solid waste acceptance criteria

    International Nuclear Information System (INIS)

    Willis, N.P.; Triner, G.C.

    1991-09-01

    Westinghouse Hanford Company manages the Hanford Site solid waste treatment, storage, and disposal facilities for the US Department of Energy Field Office, Richland under contract DE-AC06-87RL10930. These facilities include radioactive solid waste disposal sites, radioactive solid waste storage areas and hazardous waste treatment, storage, and/or disposal facilities. This manual defines the criteria that must be met by waste generators for solid waste to be accepted by Westinghouse Hanford Company for treatment, storage and/or disposal facilities. It is to be used by all waste generators preparing radioactive solid waste for storage or disposal at the Hanford Site facilities and for all Hanford Site generators of hazardous waste. This manual is also intended for use by Westinghouse Hanford Company solid waste technical staff involved with approval and acceptance of solid waste. The criteria in this manual represent a compilation of state and federal regulations; US Department of Energy orders; Hanford Site requirements; and other rules, regulations, guidelines, and standards as they apply to management of solid waste. Where appropriate, these requirements are included in the manual by reference. It is the intent of this manual to provide guidance to the waste generator in meeting the applicable requirements

  8. Consumer Acceptability Of Irradiated Foods

    International Nuclear Information System (INIS)

    Awoyinka, A.; Akingbohungbe, A.E.

    1994-01-01

    Three commonly used food items; maize, beans and smoked fish were irradiated and consumer acceptability was tested through a questionnaire method. Subjects were residents in Ile-Ife, Nigeria. Respondents attitudes towards the processing and tasting of the food were very positive and the possibility of marketing the foods was suggested by them

  9. W-025, acceptance test report

    International Nuclear Information System (INIS)

    Roscha, V.

    1994-01-01

    This acceptance test report (ATR) has been prepared to establish the results of the field testing conducted on W-025 to demonstrate that the electrical/instrumentation systems functioned as intended by design. This is part of the RMW Land Disposal Facility

  10. Safety culture and public acceptance

    International Nuclear Information System (INIS)

    Mikhalevich, Alexander A.

    2002-01-01

    After the Chernobyl NPP accident a public acceptance has become a key factor in nuclear power development all over the world. Therefore, nuclear safety culture should be based not only on technical principles, responsibilities, supervision, regulatory provisions, emergency preparedness, but the public awareness of minimum risk during the operation and decommissioning of NPPs, radioactive waste management, etc. (author)

  11. Euthanasia Acceptance: An Attitudinal Inquiry.

    Science.gov (United States)

    Klopfer, Fredrick J.; Price, William F.

    The study presented was conducted to examine potential relationships between attitudes regarding the dying process, including acceptance of euthanasia, and other attitudinal or demographic attributes. The data of the survey was comprised of responses given by 331 respondents to a door-to-door interview. Results are discussed in terms of preferred…

  12. AAL- technology acceptance through experience

    NARCIS (Netherlands)

    Huldtgren, A.; Ascencio San Pedro, G.; Pohlmeyer, A.E.; Romero Herrera, N.A.

    2014-01-01

    Despite substantial research and development of Ambient Assisted Living (AAL) technologies, their acceptance remains low. This is partially caused by a lack of accounting for users' needs and values, and the social contexts these systems are to be embedded in. Participatory design has some potential

  13. Energy justice: Participation promotes acceptance

    Science.gov (United States)

    Baxter, Jamie

    2017-08-01

    Wind turbines have been a go-to technology for addressing climate change, but they are increasingly a source of frustration for all stakeholders. While community ownership is often lauded as a panacea for maximizing turbine acceptance, a new study suggests that decision-making involvement — procedural fairness — matters most.

  14. Worldwide nuclear revival and acceptance

    International Nuclear Information System (INIS)

    Geraets, Luc H.; Crommelynck, Yves A.

    2010-01-01

    The paper outlines the current status and trends of the nuclear revival in Europe and abroad, the evolution of the public opinion in the last decade, and the interaction between the former and the latter. It emphasises the absolute priority of a professional communication and exchange to gain public acceptance. (orig.)

  15. Stakeholder acceptance analysis: Tunable hybrid plasma

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, T.

    1995-12-01

    This report resents evaluations, recommendations, and requirements concerning Tunable Hybrid Plasma (THP) derived from a three-year program of stake holder involvement. THP destroys volatile organic compounds by directing a moderate energy electron beam into a flow of air containing organic contaminants. This report is for technology developers and for those responsible for making decisions about the use of technology to remediate contamination by volatile organic compounds. Stakeholders` perspectives help those responsible for technology deployment make good decisions concerning the acceptability and applicability of THP to the remediation problems the face. In addition, this report presents data requirements for the technology`s field demonstration defined by stakeholders associated with the Hanford site in Washington State, as well as detailed comments on THP from stakeholders from four other sites throughout the western United States.

  16. Stakeholder acceptance analysis: Tunable hybrid plasma

    International Nuclear Information System (INIS)

    Peterson, T.

    1995-12-01

    This report resents evaluations, recommendations, and requirements concerning Tunable Hybrid Plasma (THP) derived from a three-year program of stake holder involvement. THP destroys volatile organic compounds by directing a moderate energy electron beam into a flow of air containing organic contaminants. This report is for technology developers and for those responsible for making decisions about the use of technology to remediate contamination by volatile organic compounds. Stakeholders' perspectives help those responsible for technology deployment make good decisions concerning the acceptability and applicability of THP to the remediation problems the face. In addition, this report presents data requirements for the technology's field demonstration defined by stakeholders associated with the Hanford site in Washington State, as well as detailed comments on THP from stakeholders from four other sites throughout the western United States

  17. 12 CFR 250.163 - Inapplicability of amount limitations to “ineligible acceptances.”

    Science.gov (United States)

    2010-01-01

    ... the legislative history surrounding the enactment of the acceptance provisions of section 13, reveals... authorizes member banks to make acceptances “for the purpose of furnishing dollar exchange as required by the usages of trade” in foreign transactions. (Such acceptances are referred to as “dollar exchange...

  18. Food irradiation receives international acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Beddoes, J M [Atomic Energy of Canada Ltd., Ottawa, Ontario. Commercial Products

    1982-04-01

    Irradiation has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of /sup 60/Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient.

  19. Consumer acceptance of irradiated food

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P [Head, Food Preservation Section, Joint FAO/ IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

    1998-12-31

    There was a widely held opinion during the 1970`s and 1980`s that consumers would be reluctant to purchase irradiated food, as it was perceived that consumers would confuse irradiated food with food contaminated by radionuclides. Indeed, a number of consumer attitude surveys conducted in several western countries during these two decades demonstrated that the concerns of consumers on irradiated food varied from very concerned to seriously concerned.This paper attempts to review parameters conducting in measuring consumer acceptance of irradiated food during the past three decades and to project the trends on this subject. It is believed that important lessons learned from past studies will guide further efforts to market irradiated food with wide consumer acceptance in the future. (Author)

  20. Consumer acceptance of irradiated food

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P. [Head, Food Preservation Section, Joint FAO/ IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

    1997-12-31

    There was a widely held opinion during the 1970`s and 1980`s that consumers would be reluctant to purchase irradiated food, as it was perceived that consumers would confuse irradiated food with food contaminated by radionuclides. Indeed, a number of consumer attitude surveys conducted in several western countries during these two decades demonstrated that the concerns of consumers on irradiated food varied from very concerned to seriously concerned.This paper attempts to review parameters conducting in measuring consumer acceptance of irradiated food during the past three decades and to project the trends on this subject. It is believed that important lessons learned from past studies will guide further efforts to market irradiated food with wide consumer acceptance in the future. (Author)

  1. Food irradiation receives international acceptance

    International Nuclear Information System (INIS)

    Beddoes, J.M.

    1982-01-01

    Irradition has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of 60 Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient

  2. Consumer acceptance of irradiated food

    International Nuclear Information System (INIS)

    Loaharanu, P.

    1997-01-01

    There was a widely held opinion during the 1970's and 1980's that consumers would be reluctant to purchase irradiated food, as it was perceived that consumers would confuse irradiated food with food contaminated by radionuclides. Indeed, a number of consumer attitude surveys conducted in several western countries during these two decades demonstrated that the concerns of consumers on irradiated food varied from very concerned to seriously concerned.This paper attempts to review parameters conducting in measuring consumer acceptance of irradiated food during the past three decades and to project the trends on this subject. It is believed that important lessons learned from past studies will guide further efforts to market irradiated food with wide consumer acceptance in the future. (Author)

  3. Risk acceptance by the population

    International Nuclear Information System (INIS)

    Diekershoff, K.

    1980-01-01

    Information which is given by systematical learning processes creates a necessary prerequisite for a partly realistic evaluation of risks. If the objective shall be achieved to reduce continuously the acceptance of risks it is absolutely necessary to include the persons concerned in the process of communication and formation. In this field social science could make a specific contribution by its approach in action research. (orig./RW) [de

  4. How is Acceptable Public Risk Determined?

    International Nuclear Information System (INIS)

    Treichel, Judy

    2001-01-01

    Acceptance of risk is a value-based decision, that is, the acceptance of risk by a person or group of persons depends on the values of the person or the shared values of the group. In the case of nuclear waste management, the nuclear industry, the regulators, and the general public approach risk from entirely different perspectives, dictated by the separate value systems held by each. The utilities producing radioactive waste view risk assessment as a part of a business decision that involves costs and benefits. The values that drive public acceptance of a national nuclear waste management policy are very different. As stated by Peter Montague of the Environmental Research Foundation: 'The only people I know who are enthusiastic about quantitative risk assessment are people who want to gain permission to expose other humans to dangerous chemicals so someone can make money. Risk assessment has proven to be an effective way to gain the necessary permissions'. Between the industry and the public are the regulators. Most national governments require regulatory agencies to establish rules that provide adequate public safety while allowing industries, whether nuclear or other producers of public commodities, to profitably do business. The general population has always had a fragile relationship with nuclear proponents. There is an atmosphere of mistrust based on the understanding that the values that matter to the general public differ tremendously from those purported by the industry and regulators. The general public is more interested in worst case scenarios; that is, what is the most severe negative consequence to their safety and the safety of their children that could result from nuclear projects. There is no cost or benefit more important to the general public than the health and safety of their families. The rift in values creates a great disparity in proposed solutions to the nuclear waste question. Regulators regard public acceptance of a risk-informed policy

  5. How is Acceptable Public Risk Determined?

    Energy Technology Data Exchange (ETDEWEB)

    Treichel, Judy [Nevada Nuclear Waste Task Force, Las Vegas, NV (United States)

    2001-07-01

    Acceptance of risk is a value-based decision, that is, the acceptance of risk by a person or group of persons depends on the values of the person or the shared values of the group. In the case of nuclear waste management, the nuclear industry, the regulators, and the general public approach risk from entirely different perspectives, dictated by the separate value systems held by each. The utilities producing radioactive waste view risk assessment as a part of a business decision that involves costs and benefits. The values that drive public acceptance of a national nuclear waste management policy are very different. As stated by Peter Montague of the Environmental Research Foundation: 'The only people I know who are enthusiastic about quantitative risk assessment are people who want to gain permission to expose other humans to dangerous chemicals so someone can make money. Risk assessment has proven to be an effective way to gain the necessary permissions'. Between the industry and the public are the regulators. Most national governments require regulatory agencies to establish rules that provide adequate public safety while allowing industries, whether nuclear or other producers of public commodities, to profitably do business. The general population has always had a fragile relationship with nuclear proponents. There is an atmosphere of mistrust based on the understanding that the values that matter to the general public differ tremendously from those purported by the industry and regulators. The general public is more interested in worst case scenarios; that is, what is the most severe negative consequence to their safety and the safety of their children that could result from nuclear projects. There is no cost or benefit more important to the general public than the health and safety of their families. The rift in values creates a great disparity in proposed solutions to the nuclear waste question. Regulators regard public acceptance of a risk

  6. Wind power: basic challenge concerning social acceptance

    NARCIS (Netherlands)

    Wolsink, M.; Meyers, R.A.

    2012-01-01

    This reference article gives an overview of social acceptance (acceptance by all relevant actors in society) of all relevant aspects of implementation and diffusion of wind power. In social acceptance three dimensions of acceptance are distinguished (socio-political -; community -; market

  7. Neutron absorber qualification and acceptance testing from the designer's perspective

    International Nuclear Information System (INIS)

    Bracey, W.; Chiocca, R.

    2004-01-01

    Starting in the mid 1990's, the USNRC began to require less than 100% credit for the 10B present in fixed neutron absorbers spent fuel transport packages. The current practice in the US is to use only 75% of the specified 10B in criticality safety calculations unless extensive acceptance testing demonstrates both the presence of the 10B and uniformity of its distribution. In practice, the NRC has accepted no more than 90% credit for 10B in recent years, while other national competent authorities continue to accept 100%. More recently, with the introduction of new neutron absorber materials, particularly aluminum / boron carbide metal matrix composites, the NRC has also expressed expectations for qualification testing, based in large part on Transnuclear's successful application to use a new composite material in the TN-68 storage / transport cask. The difficulty is that adding more boron than is really necessary to a metal has some negative effects on the material, reducing the ductility and the thermal conductivity, and increasing the cost. Excessive testing requirements can have the undesired effect of keeping superior materials out of spent fuel package designs, without a corresponding justification based on public safety. In European countries and especially in France, 100% credit has been accepted up to now with materials controls specified in the Safety Analysis Report (SAR): Manufacturing process approved by qualification testing Materials manufacturing controlled under a Quality Assurance system. During fabrication, acceptance testing directly on products or on representative samples. Acceptance criteria taking into account a statistical uncertainty corresponding to 3σ. The original and current bases for the reduced 10 B credit, the design requirements for neutron absorber materials, and the experience of Transnuclear and Cogema Logistics with neutron absorber testing are examined. Guidelines for qualification and acceptance testing and process controls

  8. Fast Acceptance by Common Experience

    Directory of Open Access Journals (Sweden)

    Nathan Berg

    2010-08-01

    Full Text Available Schelling (1969, 1971a,b, 1978 observed that macro-level patterns do not necessarily reflect micro-level intentions, desires or goals. In his classic model on neighborhood segregation which initiated a large and influential literature, individuals with no desire to be segregated from those who belong to other social groups nevertheless wind up clustering with their own type. Most extensions of Schelling's model have replicated this result. There is an important mismatch, however, between theory and observation, which has received relatively little attention. Whereas Schelling-inspired models typically predict large degrees of segregation starting from virtually any initial condition, the empirical literature documents considerable heterogeneity in measured levels of segregation. This paper introduces a mechanism that can produce significantly higher levels of integration and, therefore, brings predicted distributions of segregation more in line with real-world observation. As in the classic Schelling model, agents in a simulated world want to stay or move to a new location depending on the proportion of neighbors they judge to be acceptable. In contrast to the classic model, agents' classifications of their neighbors as acceptable or not depend lexicographically on recognition first and group type (e.g., ethnic stereotyping second. The FACE-recognition model nests classic Schelling: When agents have no recognition memory, judgments about the acceptability of a prospective neighbor rely solely on his or her group type (as in the Schelling model. A very small amount of recognition memory, however, eventually leads to different classifications that, in turn, produce dramatic macro-level effects resulting in significantly higher levels of integration. A novel implication of the FACE-recognition model concerns the large potential impact of policy interventions that generate modest numbers of face-to-face encounters with members of other social groups.

  9. How acceptable has become tolerable

    International Nuclear Information System (INIS)

    Clarke, R.H.

    1989-01-01

    A brief article discusses the differing conclusions drawn by the Royal Society Study Group and the Health and Safety Executive on the acceptability of the level of annual risk of death to the individual due to radiation. Regarding occupational exposure, both groups arrived at the same figure of 1 in 1000 per year but the former group considered this to be 'hardly totally unacceptable' while the latter group considered this to be 'borderline of intolerable'. Regarding exposure of the members of the public, the levels of risk concluded from both groups were even more divergent. (U.K.)

  10. Axelrod model: accepting or discussing

    Science.gov (United States)

    Dybiec, Bartlomiej; Mitarai, Namiko; Sneppen, Kim

    2012-10-01

    Agents building social systems are characterized by complex states, and interactions among individuals can align their opinions. The Axelrod model describes how local interactions can result in emergence of cultural domains. We propose two variants of the Axelrod model where local consensus is reached either by listening and accepting one of neighbors' opinion or two agents discuss their opinion and achieve an agreement with mixed opinions. We show that the local agreement rule affects the character of the transition between the single culture and the multiculture regimes.

  11. Acceptance of nuclear energy in developed countries

    International Nuclear Information System (INIS)

    Sobajima, Makoto

    1999-03-01

    This paper focuses on the presence of problems, governmental efforts and the state of each people's awareness in accepting nuclear energy especially in developed countries and reviews the past circumstances and recent activities. Significant differences among countries in the popularity of nuclear power depend largely on the environment of the particular country such as energy circumstances and also on the execution of the energy policy. Also it is pointed out that the difference comes from the consciousness of the execution of the people in such a policy they establish and decide whether they accept or not. The analysis, that the French people traditionally believe they cannot control risks and give high degree of trust to their government and specialists, whereas Americans conversely intervene in administration to control risks by themselves and try to change specialist's Judgment, explains one side of polarization in popularity of nuclear energy in the world. Japanese have tended to not to believe the administration probably due to recent continuous scandals of officials and motivation to require disclosure of information and to dispute, which lays on the background of retard of nuclear energy. For resolving the global issues such as warming, it is becoming more important that at least specialists of nuclear technology recover the loosing trust owing to the accidents and scandals through steady activities, show the whole view of trust worthy development plan of nuclear energy and regain the confidence by the people. (author)

  12. FUZZY ACCEPTANCE SAMPLING AND CHARACTERISTIC CURVES

    Directory of Open Access Journals (Sweden)

    Ebru Turano?lu

    2012-02-01

    Full Text Available Acceptance sampling is primarily used for the inspection of incoming or outgoing lots. Acceptance sampling refers to the application of specific sampling plans to a designated lot or sequence of lots. The parameters of acceptance sampling plans are sample sizes and acceptance numbers. In some cases, it may not be possible to define acceptance sampling parameters as crisp values. These parameters can be expressed by linguistic variables. The fuzzy set theory can be successfully used to cope with the vagueness in these linguistic expressions for acceptance sampling. In this paper, the main distributions of acceptance sampling plans are handled with fuzzy parameters and their acceptance probability functions are derived. Then the characteristic curves of acceptance sampling are examined under fuzziness. Illustrative examples are given.

  13. Public acceptance: A Japanese view

    International Nuclear Information System (INIS)

    1972-01-01

    A number of factors enter into a consideration of the public acceptance of nuclear power ? the public, nuclear power as an entity, and the interaction between the two. Interaction here implies the manner in which nuclear power is presented to the public ? what is the public need for nuclear power, and what public risk is entailed in having it? The problem of public acceptance, in this sense, is time-dependent. For the public is changeable, just as nuclear power is subject to technical progress and ' social' improvement. Japan is geographically a very small country with a very high density of population. Any industrial activity and any large-scale employment of modern technology is apt to have a much greater impact on the physical, social and biological environment of individual Japanese people than similar activities would have on those of other countries. Industrial pollutants such as sulphur dioxide from power plants, oxides of nitrogen from automobile engine exhausts, organic mercury from chemical industries and so on affect society to a high degree, considered in terms of their concentration either per capita or per square kilometre. In the case of nuclear power, therefore, people are more concerned with radiological effects than with thermal pollution.no matter how one looks at it, the experience of Hiroshima and Nagasaki has made the average member of the Japanese public, very sensitive to the problem of radiation safety. This is no longer a subject in which science or logic can persuade

  14. Public acceptance: A Japanese view

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1972-07-01

    A number of factors enter into a consideration of the public acceptance of nuclear power ? the public, nuclear power as an entity, and the interaction between the two. Interaction here implies the manner in which nuclear power is presented to the public ? what is the public need for nuclear power, and what public risk is entailed in having it? The problem of public acceptance, in this sense, is time-dependent. For the public is changeable, just as nuclear power is subject to technical progress and ' social' improvement. Japan is geographically a very small country with a very high density of population. Any industrial activity and any large-scale employment of modern technology is apt to have a much greater impact on the physical, social and biological environment of individual Japanese people than similar activities would have on those of other countries. Industrial pollutants such as sulphur dioxide from power plants, oxides of nitrogen from automobile engine exhausts, organic mercury from chemical industries and so on affect society to a high degree, considered in terms of their concentration either per capita or per square kilometre. In the case of nuclear power, therefore, people are more concerned with radiological effects than with thermal pollution.no matter how one looks at it, the experience of Hiroshima and Nagasaki has made the average member of the Japanese public, very sensitive to the problem of radiation safety. This is no longer a subject in which science or logic can persuade.

  15. Waste transmutation and public acceptance

    International Nuclear Information System (INIS)

    Pigford, T.H.

    1991-01-01

    The concept of transmuting radioactive wastes with reactors or accelerators is appealing. It has the potential of simplifying or eliminating problems of disposing of nuclear waste. The transmutation concept has been renewed vigorously at a time when national projects to dispose of high-level and transuranic waste are seriously delayed. In this period of tightening federal funds and program curtailments, skilled technical staffs are available at US Department of Energy (DOE) national laboratories and contractors to work on waste transmutation. If the claims of transmutation can be shown to be realistic, economically feasible, and capable of being implemented within the US institutional infrastructure, public acceptance of nuclear waste disposal may be enhanced. If the claims for transmutation are not substantiated, however, there will result a serious loss of credibility and an unjust exacerbation of public concerns about nuclear waste. The paper discusses the following topics: how public acceptance is achieved; the technical community and waste disposal; transmutation and technical communication; transmutation issues; technical fixes and public perception

  16. Stakeholder acceptance analysis ResonantSonic drilling

    International Nuclear Information System (INIS)

    Peterson, T.

    1995-12-01

    This report presents evaluations, recommendations, and requirements concerning ResonantSonic Drilling (Sonic Drilling), derived from a three-year program of stakeholder involvement. Sonic Drilling is an innovative method to reach contamination in soil and groundwater. The resonant sonic drill rig uses counter-rotating weights to generate energy, which causes the drill pipe to vibrate elastically along its entire length. In the resonant condition, forces of up to 200,000 pounds are transmitted to the drill bit face to create a cutting action. The resonant energy causes subsurface materials to move back into the adjacent formation, permitting the drill pipe to advance. This report is for technology developers and those responsible for making decisions about the use of technology to remediate contamination by volatile organic compounds. Stakeholders' perspectives help those responsible for technology deployment to make good decisions concerning the acceptability and applicability of sonic drilling to the remediation problems they face

  17. Promoting the acceptance of nuclear technology

    International Nuclear Information System (INIS)

    Rueckl, E.

    1998-01-01

    Restoring the public acceptance of nuclear technology requires optimized public relations work and an enhanced interaction among the nuclear industry and schools and universities. Thinking in contexts needs to be promoted, also in order to improve knowledge of mass flows. Specific terms often mean different things to experts and to the public. This can be corrected by careful use of language and precision in public relations work. The young generation is more openminded towards technology now than it was in the seventies and eighties. This is a point of departure in winning young people also for nuclear technology. For this to happen, science education in schools needs to be improved and the appropriate courses need to be introduced. (orig.) [de

  18. Robust design requirements specification: a quantitative method for requirements development using quality loss functions

    DEFF Research Database (Denmark)

    Pedersen, Søren Nygaard; Christensen, Martin Ebro; Howard, Thomas J.

    2016-01-01

    Product requirements serve many purposes in the product development process. Most importantly, they are meant to capture and facilitate product goals and acceptance criteria, as defined by stakeholders. Accurately communicating stakeholder goals and acceptance criteria can be challenging and more...

  19. 49 CFR 174.9 - Safety and security inspection and acceptance.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Safety and security inspection and acceptance. 174... RAIL General Requirements § 174.9 Safety and security inspection and acceptance. (a) At each location... not conform to the safety and security requirements of this subchapter, the carrier may not forward or...

  20. Time consistency conditions for acceptability measures, with an application to Tail Value at Risk

    NARCIS (Netherlands)

    Roorda, Berend; Schumacher, Hans

    2005-01-01

    An acceptability measure is a number that summarizes information on monetary outcomes of a given position in various scenarios, and that, depending on context, may be interpreted as a capital requirement or as a price. In a multiperiod setting, it is reasonable to require that an acceptability

  1. Acceptance of Others, Feeling of Being Accepted and Striving for Being Accepted Among the Representatives of Different Kinds of Occupations

    Directory of Open Access Journals (Sweden)

    Gergana Stanoeva

    2012-05-01

    Full Text Available This paper deals with an important issue related to the human attitudes and needs in interpersonal and professional aspects. The theoretical part deals with several psychological components of the self-esteem and esteem of the others – acceptance of the others, feeling of being accepted, need for approval. Some gender differences in manifestations of acceptance and feeling of being accepted at the workplace are discussed. This article presents some empirical data for the degree of acceptance of others, feeling of being accepted and the strive for being accepted among the representatives of helping, pedagogical, administrative and economic occupations, as well as non-qualified workers. The goals of the study were to reveal the interdependency between these constructs and to be found some significant differences between the representatives of the four groups of occupations. The methods of the first study were W. Fey’s scales “Acceptance of others”, and “How do I feel accepted by others”. The method of the second study was Crown and Marlowe Scale for Social Desirability. The results indicated some significant differences in acceptance of others and feeling of being accepted between the non-qualified workers and the representatives of helping, administrative and economic occupations. There were not any significant difference in strive for being accepted between the fouroccupational groups.

  2. User acceptance of mobile notifications

    CERN Document Server

    Westermann, Tilo

    2017-01-01

    This book presents an alternative approach to studying smartphone-app user notifications. It starts with insights into user acceptance of mobile notifications in order to provide tools to support users in managing these. It extends previous research by investigating factors that influence users’ perception of notifications and proposes tools addressing the shortcomings of current systems. It presents a technical framework and testbed as an approach for evaluating the usage of mobile applications and notifications, and then discusses a series of studies based on this framework that investigate factors influencing users’ perceptions of mobile notifications. Lastly, a set of design guidelines for the usage of mobile notifications is derived that can be employed to support users in handling notifications on smartphones.

  3. Surface moisture measurement system acceptance testing work plan

    International Nuclear Information System (INIS)

    Ritter, G.A.

    1996-01-01

    This work plan addresses testing of the Surface Moisture Measurement System (SMMS) at the Fuels and Materials Examination Facility (FMEF). The purpose of this plan is to define the scope of work, identify organizational responsibilities, describe test control requirements, and provide estimated costs and schedule associated with acceptance testing

  4. Human Papilloma Virus Vaccine: Determinants of Acceptability by ...

    African Journals Online (AJOL)

    Vaccination of adolescent females against Human Papilloma Virus (HPV), the causative agent for cervical cancer has recently become available. As minors, parental acceptance of the vaccines for adolescent daughters requires exploration. This was a cross-sectional survey of 201 mothers attending the gynaecology clinic ...

  5. Acceptance test report, plutonium finishing plant life safety upgrade

    International Nuclear Information System (INIS)

    Hodge, S.G.

    1994-01-01

    This acceptance Test Procedure (ATP) has been prepared to demonstrate that modifications to the Fir Protection systems function as required by project criteria. The ATP will test the Fire Alarm Control Panels, Flow Alarm Pressure Switch, Heat Detectors, Smoke Detectors, Flow Switches, Manual Pull Stations, and Gong/Door By Pass Switches

  6. Lack of Acceptance of Reciprocity Norms in Preschool Children.

    Science.gov (United States)

    Berndt, Thomas J.

    1979-01-01

    Two studies investigated preschool children's acceptance of the reciprocity norms that allow retaliation and that require returning favors. Children viewed cartoons that portrayed animal puppets involved in reciprocal or nonreciprocal aggressive and prosocial behavior. They were then asked to evaluate the actor in each cartoon as "good"…

  7. Guidelines for generators of hazardous chemical waste at LBL and guidelines for generators of radioactive and mixed waste at LBL

    International Nuclear Information System (INIS)

    1993-10-01

    The purpose of this document is to provide the acceptance criteria for the transfer of hazardous chemical waste to LBL's Hazardous Waste Handling Facility (HWHF). Hazardous chemical waste is a necessary byproduct of LBL's research and technical support activities. This waste must be handled properly if LBL is to operate safely and provide adequate protection to staff and the environment. These guidelines describe how you, as a generator of hazardous chemical waste, can meet LBL's acceptance criteria for hazardous chemical waste

  8. Antecedents to Consumers' Acceptance of Mobile Advertisements

    DEFF Research Database (Denmark)

    Rajala, Risto; Westerlund, Mika

    2010-01-01

    The paper presents a hierarchical construct PLS structural equation model to analyze mobile advertisement acceptance. Hypotheses are established and tested about the hierarchical structure and the effects of the factors that precede consumers' behavioral intention to accept mobile advertisement....... The results suggest that valuable content and trust in advertisers are key predictors of mobile device users' acceptance of mobile advertising. In addition, subjective value of the ads and subjective norms mediate these antecedent-acceptance relationships. The results are invaluable to both scholars...

  9. Acceptance test report for core sample trucks 3 and 4

    International Nuclear Information System (INIS)

    Corbett, J.E.

    1996-01-01

    The purpose of this Acceptance Test Report is to provide documentation for the acceptance testing of the rotary mode core sample trucks 3 and 4, designated as HO-68K-4600 and HO-68K-4647, respectively. This report conforms to the guidelines established in WHC-IP-1026, ''Engineering Practice Guidelines,'' Appendix M, ''Acceptance Test Procedures and Reports.'' Rotary mode core sample trucks 3 and 4 were based upon the design of the second core sample truck (HO-68K-4345) which was constructed to implement rotary mode sampling of the waste tanks at Hanford. Successful completion of acceptance testing on June 30, 1995 verified that all design requirements were met. This report is divided into four sections, beginning with general information. Acceptance testing was performed on trucks 3 and 4 during the months of March through June, 1995. All testing was performed at the ''Rock Slinger'' test site in the 200 West area. The sequence of testing was determined by equipment availability, and the initial revision of the Acceptance Test Procedure (ATP) was used for both trucks. Testing was directed by ICF-KH, with the support of WHC Characterization Equipment Engineering and Characterization Project Operations. Testing was completed per the ATP without discrepancies or deviations, except as noted

  10. 98 - 104 TJ - Accepted paid

    African Journals Online (AJOL)

    DR. AMIN

    times that of a mouse, will have a metabolism roughly 31 ..... utilizes knowledge of ecology, physiology and physics in order to predict ... rainfall, and salinity, and other variables are then ... invertebrate species, such information may require.

  11. 46 CFR 28.73 - Accepted organizations.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Accepted organizations. 28.73 Section 28.73 Shipping... INDUSTRY VESSELS General Provisions § 28.73 Accepted organizations. An organization desiring to be designated by the Commandant as an accepted organization must request such designation in writing. As a...

  12. Older Adults' Acceptance of Information Technology

    Science.gov (United States)

    Wang, Lin; Rau, Pei-Luen Patrick; Salvendy, Gavriel

    2011-01-01

    This study investigated variables contributing to older adults' information technology acceptance through a survey, which was used to find factors explaining and predicting older adults' information technology acceptance behaviors. Four factors, including needs satisfaction, perceived usability, support availability, and public acceptance, were…

  13. Relevant cost information for order acceptance decisions

    NARCIS (Netherlands)

    Wouters, M.J.F.

    1997-01-01

    Some economic considerations for order acceptance decisions are discussed. The relevant economic considerations for order acceptance are widely discussed in the literature: only those costs are relevant which would be avoidable by not accepting the order incremental costs plus opportunity costs .

  14. Credit in Acceptance Sampling on Attributes

    NARCIS (Netherlands)

    Klaassen, Chris A.J.

    2000-01-01

    Credit is introduced in acceptance sampling on attributes and a Credit Based Acceptance sampling system is developed that is very easy to apply in practice.The credit of a producer is defined as the total number of items accepted since the last rejection.In our sampling system the sample size for a

  15. Project W-049H Collection System Acceptance Test

    International Nuclear Information System (INIS)

    Buckles, D.I.

    1994-01-01

    The Acceptance Test Procedure (ATP) Program for Project W-049H covers the following activities: Disposal system, Collection system, Instrumentation and control system. Each activity has its own ATP. The purpose of the ATPs is to verify that the systems have been constructed in accordance with the construction documents and to demonstrate that the systems function as required by the Project criteria. This ATP has been prepared to demonstrate that the Collection System Instrumentation functions as required by project criteria

  16. Acceptance sampling using judgmental and randomly selected samples

    Energy Technology Data Exchange (ETDEWEB)

    Sego, Landon H.; Shulman, Stanley A.; Anderson, Kevin K.; Wilson, John E.; Pulsipher, Brent A.; Sieber, W. Karl

    2010-09-01

    We present a Bayesian model for acceptance sampling where the population consists of two groups, each with different levels of risk of containing unacceptable items. Expert opinion, or judgment, may be required to distinguish between the high and low-risk groups. Hence, high-risk items are likely to be identifed (and sampled) using expert judgment, while the remaining low-risk items are sampled randomly. We focus on the situation where all observed samples must be acceptable. Consequently, the objective of the statistical inference is to quantify the probability that a large percentage of the unsampled items in the population are also acceptable. We demonstrate that traditional (frequentist) acceptance sampling and simpler Bayesian formulations of the problem are essentially special cases of the proposed model. We explore the properties of the model in detail, and discuss the conditions necessary to ensure that required samples sizes are non-decreasing function of the population size. The method is applicable to a variety of acceptance sampling problems, and, in particular, to environmental sampling where the objective is to demonstrate the safety of reoccupying a remediated facility that has been contaminated with a lethal agent.

  17. Plasma Hazards and Acceptance for International Space Station Extravehicular Activities

    Science.gov (United States)

    Patton, Thomas

    2010-09-01

    Extravehicular activity(EVA) is accepted by NASA and other space faring agencies as a necessary risk in order to build and maintain a safe and efficient laboratory in space. EVAs are used for standard construction and as contingency operations to repair critical equipment for vehicle sustainability and safety of the entire crew in the habitable volume. There are many hazards that are assessed for even the most mundane EVA for astronauts, and the vast majority of these are adequately controlled per the rules of the International Space Station Program. The need for EVA repair and construction has driven acceptance of a possible catastrophic hazard to the EVA crewmember which cannot currently be controlled adequately. That hazard is electrical shock from the very environment in which they work. This paper describes the environment, causes and contributors to the shock of EVA crewmembers attributed to the ionospheric plasma environment in low Earth orbit. It will detail the hazard history, and acceptance process for the risk associated with these hazards that give assurance to a safe EVA. In addition to the hazard acceptance process this paper will explore other factors that go into the decision to accept a risk including criticality of task, hardware design and capability, and the probability of hazard occurrence. Also included will be the required interaction between organizations at NASA(EVA Office, Environments, Engineering, Mission Operations, Safety) in order to build and eventually gain adequate acceptance rationale for a hazard of this kind. During the course of the discussion, all current methods of mitigating the hazard will be identified. This paper will capture the history of the plasma hazard analysis and processes used by the International Space Station Program to formally assess and qualify the risk. The paper will discuss steps that have been taken to identify and perform required analysis of the floating potential shock hazard from the ISS environment

  18. Idaho CERCLA Disposal Facility Complex Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    W. Mahlon Heileson

    2006-10-01

    The Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility (ICDF) has been designed to accept CERCLA waste generated within the Idaho National Laboratory. Hazardous, mixed, low-level, and Toxic Substance Control Act waste will be accepted for disposal at the ICDF. The purpose of this document is to provide criteria for the quantities of radioactive and/or hazardous constituents allowable in waste streams designated for disposal at ICDF. This ICDF Complex Waste Acceptance Criteria is divided into four section: (1) ICDF Complex; (2) Landfill; (3) Evaporation Pond: and (4) Staging, Storage, Sizing, and Treatment Facility (SSSTF). The ICDF Complex section contains the compliance details, which are the same for all areas of the ICDF. Corresponding sections contain details specific to the landfill, evaporation pond, and the SSSTF. This document specifies chemical and radiological constituent acceptance criteria for waste that will be disposed of at ICDF. Compliance with the requirements of this document ensures protection of human health and the environment, including the Snake River Plain Aquifer. Waste placed in the ICDF landfill and evaporation pond must not cause groundwater in the Snake River Plain Aquifer to exceed maximum contaminant levels, a hazard index of 1, or 10-4 cumulative risk levels. The defined waste acceptance criteria concentrations are compared to the design inventory concentrations. The purpose of this comparison is to show that there is an acceptable uncertainty margin based on the actual constituent concentrations anticipated for disposal at the ICDF. Implementation of this Waste Acceptance Criteria document will ensure compliance with the Final Report of Decision for the Idaho Nuclear Technology and Engineering Center, Operable Unit 3-13. For waste to be received, it must meet the waste acceptance criteria for the specific disposal/treatment unit (on-Site or off-Site) for which it is destined.

  19. Nuclear waste in public acceptance

    International Nuclear Information System (INIS)

    Vastchenko, Svetlana V.

    2003-01-01

    The existing problem on a faithful acceptance of nuclear information by population is connected, to a considerable extent, with a bad nuclear 'reputation' because of a great amount of misrepresented and false information from 'the greens'. In contrast to a bare style of professionals often neglecting an emotional perception, a loud voice of 'the greens' appeals both to the head, and to the heart of the audience. People pattern their behaviour weakly on problems of safe application of different irradiation sources in industry, conditions of life, medicine and everyday life. Radiation danger of some sources is often exaggerated (computers, nuclear technologies, radiation treatment) and the danger of the others is, on the contrary, underestimated (nuclear and roentgen methods of diagnostics and medical treatment). The majority of our citizens do not know which level of radiation is normal and safe, which ways radioactive substances intake into the organism of a human being and how to diminish the dose load on the organism by simple measures. Only specialists can be orientated themselves in a great number of radiation units. Low level of knowledge of the population and false conceptions are connected with the fact that they are mainly informed about nuclear technologies from mass media, where the voice of 'Greenpeace' is loudly sounded, but they often give misrepresented and false information doing it in the very emotional form. In contrast to them, scientists-professionals often ignore a sensitive part of apprehending of information and do not attach importance to it. As a rule, the style of specialists is of a serious academician character when they meet with the public. People preconception to nuclear waste and distrust to a positive information concerning nuclear technologies are explained, to a considerable extent, by a bivalent type of thinking when people operate by two opposite conceptions only, such as 'there is' or 'there is not' (there is or there is not

  20. Nuclear waste in public acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Vastchenko, Svetlana V. [Joint Institute for Power and Nuclear Research - Sosny / National Academy of Science, A.K.Krasin Str., 99, Minsk 220109 (Belarus)

    2003-07-01

    The existing problem on a faithful acceptance of nuclear information by population is connected, to a considerable extent, with a bad nuclear 'reputation' because of a great amount of misrepresented and false information from 'the greens'. In contrast to a bare style of professionals often neglecting an emotional perception, a loud voice of 'the greens' appeals both to the head, and to the heart of the audience. People pattern their behaviour weakly on problems of safe application of different irradiation sources in industry, conditions of life, medicine and everyday life. Radiation danger of some sources is often exaggerated (computers, nuclear technologies, radiation treatment) and the danger of the others is, on the contrary, underestimated (nuclear and roentgen methods of diagnostics and medical treatment). The majority of our citizens do not know which level of radiation is normal and safe, which ways radioactive substances intake into the organism of a human being and how to diminish the dose load on the organism by simple measures. Only specialists can be orientated themselves in a great number of radiation units. Low level of knowledge of the population and false conceptions are connected with the fact that they are mainly informed about nuclear technologies from mass media, where the voice of 'Greenpeace' is loudly sounded, but they often give misrepresented and false information doing it in the very emotional form. In contrast to them, scientists-professionals often ignore a sensitive part of apprehending of information and do not attach importance to it. As a rule, the style of specialists is of a serious academician character when they meet with the public. People preconception to nuclear waste and distrust to a positive information concerning nuclear technologies are explained, to a considerable extent, by a bivalent type of thinking when people operate by two opposite conceptions only, such as 'there is

  1. Toxic chemical risk acceptance criteria

    International Nuclear Information System (INIS)

    Craig, D.K.; Davis, J.; Lee, L.; Lein, P.; Omberg, S.

    1992-01-01

    This paper presents recommendations of a subcommittee of the Westinghouse M ampersand 0 Nuclear Facility Safety Committee concerning toxic chemical risk acceptance criteria. Two sets of criteria have been developed, one for use in the hazard classification of facilities, and the second for use in comparing risks in DOE non-reactor nuclear facility Safety Analysis Reports. The Emergency Response Planning Guideline (ERPG) values are intended to provide estimates of concentration ranges for specific chemicals above which exposure would be expected to lead to adverse heath effects of increasing severity for ERPG-1, -2, and -3s. The subcommittee recommends that criteria for hazard class or risk range be based on ERPGs for all chemicals. Probability-based Incremental Cancer Risk (ICR) criteria are recommended for additional analyses of risks from all known or suspected human carcinogens. Criteria are given for both on-site and off-site exposure. The subcommittee also recommends that the 5-minute peak concentration be compared with the relevant criterion with no adjustment for exposure time. Since ERPGs are available for only a limited number of chemicals, the subcommittee has developed a proposed hierarchy of concentration limit parameters for the different criteria

  2. Consumer acceptance of irradiated foods

    International Nuclear Information System (INIS)

    Feenstra, M.H.; Scholten, A.H.

    1991-01-01

    Although the first experiments on food irradiation were carried out in 1916 in Sweden, food irradiation, is for consumers, a relatively new technology. From the sixties food irradiation has been applied more and more, so that the consumer movement has become alert to this technology. Since then a lot of controversies have arisen in the literature about wholesomeness, safety, effects, etc. Food irradiation is currently permitted on a small scale in about 30 countries; in some countries or states food irradiation has been put under a ban (e.g. Australia, New Zealand, New Jersey). The World Health Organization (WHO) and the Food and Agriculture Organization of the United Nations (FAO) have, however, chosen food irradiation as a safe and sound method for preserving and improving the safety of food. Reactions on the part of the consumer organizations of many countries are however not in favour of or are even opposed to food irradiation. In this chapter consumer acceptance related to technological developments is described, then the convergence of the consumer movement on public opinion and concern on food irradiation is discussed. The need for labelling of irradiated food products is discussed and finally recommendations are given of ways to change consumers attitudes to food irradiation. (author)

  3. Predicting nurses' acceptance of radiofrequency identification technology.

    Science.gov (United States)

    Norten, Adam

    2012-10-01

    The technology of radiofrequency identification allows for the scanning of radiofrequency identification-tagged objects and individuals without line-of-sight requirements. Healthcare organizations use radiofrequency identification to ensure the health and safety of patients and medical personnel and to uncover inefficiencies. Although the successful implementation of a system incorporating radiofrequency identification technologies requires acceptance and use of the technology, some nurses using radiofrequency identification in hospitals feel like "Big Brother" is watching them. This predictive study used a theoretical model assessing the effect of five independent variables: privacy concerns, attitudes, subjective norms, controllability, and self-efficacy, on a dependent variable, nurses' behavioral intention to use radiofrequency identification. A Web-based questionnaire containing previously validated questions was answered by 106 US RNs. Multiple linear regression showed that all constructs together accounted for 60% of the variance in nurses' intention to use radiofrequency identification. Of the predictors in the model, attitudes provided the largest unique contribution when the other predictors in the model were held constant; subjective norms also provided a unique contribution. Privacy concerns, controllability, and self-efficacy did not provide a significant contribution to nurses' behavioral intention to use radiofrequency identification.

  4. Acceptability of GM foods among Pakistani consumers

    Science.gov (United States)

    Ali, Akhter; Rahut, Dil Bahadur; Imtiaz, Muhammad

    2016-01-01

    ABSTRACT In Pakistan majority of the consumers do not have information about genetically modified (GM) foods. In developing countries particularly in Pakistan few studies have focused on consumers' acceptability about GM foods. Using comprehensive primary dataset collected from 320 consumers in 2013 from Pakistan, this study analyzes the determinants of consumers' acceptability of GM foods. The data was analyzed by employing the bivariate probit model and censored least absolute deviation (CLAD) models. The empirical results indicated that urban consumers are more aware of GM foods compared to rural consumers. The acceptance of GM foods was more among females' consumers as compared to male consumers. In addition, the older consumers were more willing to accept GM food compared to young consumers. The acceptability of GM foods was also higher among wealthier households. Low price is the key factor leading to the acceptability of GM foods. The acceptability of the GM foods also reduces the risks among Pakistani consumers. PMID:27494790

  5. Acceptability of GM foods among Pakistani consumers.

    Science.gov (United States)

    Ali, Akhter; Rahut, Dil Bahadur; Imtiaz, Muhammad

    2016-04-02

    In Pakistan majority of the consumers do not have information about genetically modified (GM) foods. In developing countries particularly in Pakistan few studies have focused on consumers' acceptability about GM foods. Using comprehensive primary dataset collected from 320 consumers in 2013 from Pakistan, this study analyzes the determinants of consumers' acceptability of GM foods. The data was analyzed by employing the bivariate probit model and censored least absolute deviation (CLAD) models. The empirical results indicated that urban consumers are more aware of GM foods compared to rural consumers. The acceptance of GM foods was more among females' consumers as compared to male consumers. In addition, the older consumers were more willing to accept GM food compared to young consumers. The acceptability of GM foods was also higher among wealthier households. Low price is the key factor leading to the acceptability of GM foods. The acceptability of the GM foods also reduces the risks among Pakistani consumers.

  6. Aesthetic acceptance equals to nature's compensation plus surgical correction.

    Science.gov (United States)

    Vadgaonkar, Vaishali; Gangurde, Parag; Karandikar, Anita; Mahajan, Nikhil

    2013-07-25

    Orthognathic surgery has become an acceptable treatment plan for patients with various maxillofacial deformities. The rehabilitation of severe class III adult patients requires a complex interdisciplinary orthodontic and orthognathic approach. This presentation aims to show a case of combination of camouflage and bilateral sagittal split osteotomy (BSSO).Camouflage in maxillary arch was accepted after analysing visual treatment objective (VTO) and pleasing soft tissue compensation which gave us the clue to go ahead for surgical correction of excess mandibular length to achieve best aesthetic outcome while maintaining nature's compensation in upper arch.

  7. Acceptance Testing Of Web Applications With Test Description Language

    Directory of Open Access Journals (Sweden)

    Łukasz Olek

    2014-01-01

    Full Text Available Acceptance tests are usually created by a client after a part of a system is implemented. However, some methodologies propose the elaboration of test cases before implementing a system. This approach increases the probability of system implementation that fulfills requirements, but may be problematic for customers and testers. To allow acceptance testing in such conditions, we propose to define test cases by recording them on an interactive mockup (a low detailed user-interface prototype. The paper focuses on Test Description Language, a notation used to store test cases.

  8. Public acceptance of nuclear power in Japan

    International Nuclear Information System (INIS)

    Iguchi, T.

    1995-01-01

    Japan has a fragile energy supply structure, with 84% of its energy depending on import; for example, 99.6% of the oil comes from overseas, which makes Japan's economic base rather vulnerable. In order to ensure constant energy supply, it is indispensable to diversify the energy sources and to create indigenous energy. In view of this, nuclear energy is considered to be the main alternative to crude oil because it has several advantages over other energy sources, such as stable supply of uranium and the fact that it is compatible with efforts to find solutions to global environmental problems. However, since the general public is not familiar with nuclear technology, it is difficult to get the understanding and co-operation of people. In view of this, public relations activities providing information on the need and safety of nuclear power generation have been performed. As a result, in recent years, about 70% of the people came to recognize the need for nuclear power generation. Although people's recognition of this need has increased substantially, it is still difficult for them to accept the construction of nuclear facilities, because of their anxiety regarding the safety of such plants and the lack of information by the government and electric utilities. This makes the acquisition of new sites for nuclear power plants difficult, so that the time required for developing such plants becomes longer. In order to eliminate people's anxieties, both the government and electric utilities should provide accurate information, at the proper time and using a method that makes it easy for the people to understand the problems involved. It is also important for the government and the electric utilities to listen carefully to the opinions and questions of people and to increase friendly communications with them. The government, electric utilities and constructors of nuclear facilities have to co-operate in order to improve the measures taken to gain public acceptance of

  9. Nevada Test Site waste acceptance criteria [Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    1997-08-01

    Revision one updates the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the NTS. Review each section of this document. This document is not intended to include all of the requirements; rather, it is meant as a guide toward meeting the regulations. All references in this document should be observed to avoid omission of requirements on which acceptance or rejection of waste will be based. The Department of Energy/Nevada Operations Office (DOE/NV) and support contractors are available to assist you in understanding or interpreting this document.

  10. Nevada Test Site waste acceptance criteria [Revision 1

    International Nuclear Information System (INIS)

    None

    1997-01-01

    Revision one updates the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the NTS. Review each section of this document. This document is not intended to include all of the requirements; rather, it is meant as a guide toward meeting the regulations. All references in this document should be observed to avoid omission of requirements on which acceptance or rejection of waste will be based. The Department of Energy/Nevada Operations Office (DOE/NV) and support contractors are available to assist you in understanding or interpreting this document

  11. Some problems in the acceptability of implementing radiation protection programs

    International Nuclear Information System (INIS)

    Neill, R.H.

    1997-01-01

    The three fundamentals that radiation protection programs are based upon are; 1) establishing a quantitative correlation between radiation exposure and biological effects in people; 2) determining a level of acceptable risk of exposure; and 3) establishing systems to measure the radiation dose to insure compliance with the regulations or criteria. The paper discusses the interrelationship of these fundamentals, difficulties in obtaining a consensus of acceptable risk and gives some examples of problems in identifying the most critical population-at-risk and in measuring dose. Despite such problems, it is recommended that we proceed with the existing conservative structure of radiation protection programs based upon a linear no threshold model for low radiation doses to insure public acceptability of various potential radiation risks. Voluntary compliance as well as regulatory requirements should continue to be pursued to maintain minimal exposure to ionizing radiation. (author)

  12. Strategies for the deployment of micro-generation: Implications for social acceptance

    International Nuclear Information System (INIS)

    Sauter, Raphael; Watson, Jim

    2007-01-01

    Social acceptance of renewable energy innovation has often been discussed in the context of large renewable technology projects, acceptance having been seen as rather passive consent by the public. The potential importance of micro-generation technologies in the future energy supply mix and policymakers' increasing attention to these technologies requires a different approach to the social acceptance of renewable energy innovation and energy infrastructure technologies. Instead of mere consent to an infrastructure project, domestic micro-generation requires active acceptance by homeowners, whereby individual households become part of the electricity supply infrastructure. Acceptance may therefore be expressed in various forms: attitudes, behaviour and-most importantly-investments. This paper argues that different deployment models with varying degrees of company and consumer involvement will have a significant influence on the social acceptance of domestic micro-generation and therefore the market uptake of these technologies. Three deployment models are elaborated and briefly situated in the current UK energy policy context

  13. Radwaste characteristics and Disposal Facility Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    Sung, Suk Hyun; Jeong, Yi Yeong; Kim, Ki Hong

    2008-01-01

    The purpose of Radioactive Waste Acceptance Criteria (WAC) is to verify a radioactive waste compliance with radioactive disposal facility requirements in order to maintain a disposal facility's performance objectives and to ensure its safety. To develop WAC which is conformable with domestic disposal site conditions, we furthermore analysed the WAC of foreign disposal sites similar to the Kyung-Ju disposal site and the characteristics of various wastes which are being generated from Korea nuclear facilities. Radioactive WAC was developed in the technical cooperation with the Korea Atomic Energy Research Institute in consideration of characteristics of the wastes which are being generated from various facilities, waste generators' opinions and other conditions. The established criteria was also discussed and verified at an advisory committee which was comprised of some experts from universities, institutes and the industry. So radioactive WAC was developed to accept all wastes which are being generated from various nuclear facilities as much as possible, ensuring the safety of a disposal facility. But this developed waste acceptance criteria is not a criteria to accept all the present wastes generated from various nuclear facilities, so waste generators must seek an alternative treatment method for wastes which were not worth disposing of, and then they must treat the wastes more to be acceptable at a disposal site. The radioactive disposal facility WAC will continuously complement certain criteria related to a disposal concentration limit for individual radionuclide in order to ensure a long-term safety.

  14. Acceptability and characterization of extruded pinto, navy and black beans.

    Science.gov (United States)

    Simons, Courtney W; Hall, Clifford; Tulbek, Mehmet; Mendis, Mihiri; Heck, Taylor; Ogunyemi, Samuel

    2015-08-30

    Consumption of dry beans has been relatively flat over the last decade. Creating new bean products may increase the consumption of beans and allow more consumers to obtain the health benefits of beans. In this study, pinto, navy and black beans were milled and the resulting flours extruded into puffs. Unflavored extruded puffs were evaluated by untrained panelists using a hedonic scale for appearance, flavor, texture and overall acceptability. The compositions of raw flours and extrudates were characterized. Sensory results indicated that all beans met or exceeded the minimum requirement for acceptability. Overall acceptability of navy and pinto beans was not significantly different, while acceptability of black bean puffs was significantly lower. Total protein (198-217 g kg(-1)) in extrudates was significantly different among the three beans. Total starch ranged from 398 to 406 g kg(-1) and was not significantly different. Resistant starch, total extractable lipid and raffinose contents were significantly reduced by extrusion. Extrusion did not affect crude fiber and phytic acid contents. The minimal effects on protein and fiber contents, the significant reduction in raffinose content and the acceptability of the unflavored extruded puffs support using various bean flours as ingredients in extruded puffed products. © 2014 Society of Chemical Industry.

  15. Communication techniques for improved acceptance and adherence with therapeutic footwear.

    Science.gov (United States)

    van Netten, Jaap J; Francis, Anthony; Morphet, Ashley; Fortington, Lauren V; Postema, Klaas; Williams, Anita

    2017-04-01

    Clients' acceptance and adherence with orthoses can be influenced by a clinician's communication skills. In this clinical note, we describe two communication techniques, in the context of therapeutic footwear. Person-centred communication involves engaging with and listening to the attitudes of the client towards their condition, as well as discussing acceptance and expectations, in a structured consultation. Building a relationship is crucial and requires clients to feel heard and understood. An important influence on the acceptance and adherence is that a client makes a conscious decision to receive their device. This active receipt can be facilitated through shared decision making, wherein clinicians give clear, relevant and meaningful examples, based on clinical evidence, and ensure this is understood. Two communication techniques for clinicians providing therapeutic footwear are described. These can be adapted for use with provision of other assistive technologies to improve client acceptance and adherence. Clinical relevance Small changes in how clinicians communicate to their clients in daily practice can have a big influence on the subsequent acceptance and adherence with therapeutic footwear and indeed other prescribed assistive technologies.

  16. When is physician assisted suicide or euthanasia acceptable?

    Science.gov (United States)

    Frileux, S; Lelièvre, C; Muñoz Sastre, M T; Mullet, E; Sorum, P C

    2003-12-01

    To discover what factors affect lay people's judgments of the acceptability of physician assisted suicide and euthanasia and how these factors interact. Participants rated the acceptability of either physician assisted suicide or euthanasia for 72 patient vignettes with a five factor design--that is, all combinations of patient's age (three levels); curability of illness (two levels); degree of suffering (two levels); patient's mental status (two levels), and extent of patient's requests for the procedure (three levels). Convenience sample of 66 young adults, 62 middle aged adults, and 66 older adults living in western France. In accordance with the functional theory of cognition of N H Anderson, main effects, and interactions among patient factors and participants' characteristics were investigated by means of both graphs and ANOVA. Patient requests were the most potent determinant of acceptability. Euthanasia was generally less acceptable than physician assisted suicide, but this difference disappeared when requests were repetitive. As their own age increased, participants placed more weight on patient age as a criterion of acceptability. People's judgments concur with legislation to require a repetition of patients' requests for a life ending act. Younger people, who frequently are decision makers for elderly relatives, place less emphasis on patient's age itself than do older people.

  17. Probabilistic relationships in acceptable risk studies

    International Nuclear Information System (INIS)

    Benjamin, J.R.

    1977-01-01

    Acceptable risk studies involve uncertainties in future events: consequences and associated values, the acceptability levels, and the future decision environment. Probabilistic procedures afford the basic analytical tool to study the influence of each of these parameters on the acceptable risk decision, including their interrelationships, and combinations. A series of examples are presented in the paper in increasing complexity to illustrate the principles involved and to quantify the relationships to the acceptable risk decision. The basic objective of such studies is to broaden the scientific basis of acceptable risk decision making. It is shown that rationality and consistency in decision making is facilitated by such studies and that rather simple relationships exist in many situations of interest. The variation in criteria associated with an increase in the state of knowledge or change in the level of acceptability is also discussed

  18. Probabilistic relationships in acceptable risk studies

    International Nuclear Information System (INIS)

    Benjamin, J.R.

    1977-01-01

    Acceptable risk studies involve uncertainties in future events; consequences and associated values, the acceptability levels, and the future decision environment. Probabilistic procedures afford the basic analytical tool to study the influence of each of these parameters on the acceptable risk decision, including their interrelationships, and combinations. A series of examples are presented in the paper in increasing complexity to illustrate the principles involved and to quantify the relationships to the acceptable risk decision. The basic objective of such studies is to broaden the scientific basis of acceptable risk decision making. It is shown that rationality and consistency in decision making is facilitated by such studies and that rather simple relationships exist in many situations of interest. The variation in criteria associated with an increase in the state of knowledge or change in the level of acceptability is also discussed. (Auth.)

  19. OTM Machine Acceptance: In the Arab Culture

    Science.gov (United States)

    Rashed, Abdullah; Santos, Henrique

    Basically, neglecting the human factor is one of the main reasons for system failures or for technology rejection, even when important technologies are considered. Biometrics mostly have the characteristics needed for effortless acceptance, such as easiness and usefulness, that are essential pillars of acceptance models such as TAM (technology acceptance model). However, it should be investigated. Many studies have been carried out to research the issues of technology acceptance in different cultures, especially the western culture. Arabic culture lacks these types of studies with few publications in this field. This paper introduces a new biometric interface for ATM machines. This interface depends on a promising biometrics which is odour. To discover the acceptance of this biometrics, we distributed a questionnaire via a web site and called for participation in the Arab Area and found that most respondents would accept to use odour.

  20. 2013 SYR Accepted Poster Abstracts.

    Science.gov (United States)

    2013-01-01

    SYR 2013 Accepted Poster abstracts: 1. Benefits of Yoga as a Wellness Practice in a Veterans Affairs (VA) Health Care Setting: If You Build It, Will They Come? 2. Yoga-based Psychotherapy Group With Urban Youth Exposed to Trauma. 3. Embodied Health: The Effects of a Mind�Body Course for Medical Students. 4. Interoceptive Awareness and Vegetable Intake After a Yoga and Stress Management Intervention. 5. Yoga Reduces Performance Anxiety in Adolescent Musicians. 6. Designing and Implementing a Therapeutic Yoga Program for Older Women With Knee Osteoarthritis. 7. Yoga and Life Skills Eating Disorder Prevention Among 5th Grade Females: A Controlled Trial. 8. A Randomized, Controlled Trial Comparing the Impact of Yoga and Physical Education on the Emotional and Behavioral Functioning of Middle School Children. 9. Feasibility of a Multisite, Community based Randomized Study of Yoga and Wellness Education for Women With Breast Cancer Undergoing Chemotherapy. 10. A Delphi Study for the Development of Protocol Guidelines for Yoga Interventions in Mental Health. 11. Impact Investigation of Breathwalk Daily Practice: Canada�India Collaborative Study. 12. Yoga Improves Distress, Fatigue, and Insomnia in Older Veteran Cancer Survivors: Results of a Pilot Study. 13. Assessment of Kundalini Mantra and Meditation as an Adjunctive Treatment With Mental Health Consumers. 14. Kundalini Yoga Therapy Versus Cognitive Behavior Therapy for Generalized Anxiety Disorder and Co-Occurring Mood Disorder. 15. Baseline Differences in Women Versus Men Initiating Yoga Programs to Aid Smoking Cessation: Quitting in Balance Versus QuitStrong. 16. Pranayam Practice: Impact on Focus and Everyday Life of Work and Relationships. 17. Participation in a Tailored Yoga Program is Associated With Improved Physical Health in Persons With Arthritis. 18. Effects of Yoga on Blood Pressure: Systematic Review and Meta-analysis. 19. A Quasi-experimental Trial of a Yoga based Intervention to Reduce Stress and

  1. Technology Acceptance Model: A Survey of Literature

    Directory of Open Access Journals (Sweden)

    Priyanka Surendran

    2013-07-01

    Full Text Available The technology acceptance model has been a theory that is most widely used to explain an individual’s acceptance of an information system. This study has reviewed numerous literatures available in this area. The different studies in this area were evaluated to understand the modifications that were done on this model. The paper then tries to provide an insight on future trends in the technology acceptance model.

  2. Understanding Retailers’ Acceptance of Virtual Stores

    OpenAIRE

    Irene Y.L. Chen

    2010-01-01

    The acceptance of e-commerce among consumers has stimulated the rise of virtual stores. Increasing traditional retailers or people who do not have sufficient capital for maintaining a brick-and-mortar store have considered using virtual stores to reach global market. In the e-commerce literature, there has been rich research evidence concerning consumers’ acceptance of virtual stores. However, rigorous academic research on retailers’ acceptance of virtual stores is relatively scarce today. Th...

  3. Public acceptance in nuclear activities

    International Nuclear Information System (INIS)

    Paunescu, A.; Stiopol, M.; Manole, F.; Petran, C.; Chiper, L.

    1998-01-01

    All over the world the most part of population considers nuclear power as the energy of the future. To reinforce this opinion some fundamental requirements should be met, namely: - nuclear facilities and power plants should be safe and competitive in point of costs; - nuclear activity should record no severe accidents; - to make actual progress in the field of radwaste management and disposal; - to actually witness and increase of electric power demands. In Romania the activities related to the nuclear research and power sum-up about 40 years of experience and these can be structured as per the following directions: - nuclear power and related activities (industrial, mining, processing, storage); - research reactors; - nuclear sciences and techniques and their applications. Public opinion information is aimed at assisting such activities and make the public familiar with the concepts typical for the nuclear field. Generally, there is a feeling of fear on the part of the officials in supporting the nuclear. The basic cause would be application of on incomplete and obsolete model when educating the public opinion. That model leads to the conclusion that the open expression of one's support in favour of nuclear is a political risk. A new, more, comprehensive model leading to different conclusions was conceived and finalized lately. The two models are different from each other by 3 characteristic elements: - influence of perception; - approach of the opinion; - definition of the support. The paper describes the actions undertaken in Romania in order to fulfill these requirements

  4. 48 CFR 227.7203-14 - Conformity, acceptance, and warranty of computer software and computer software documentation.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Conformity, acceptance... Software Documentation 227.7203-14 Conformity, acceptance, and warranty of computer software and computer...) Conformity and acceptance. Solicitations and contracts requiring the delivery of computer software shall...

  5. Acceptance of waste for disposal in the potential United States repository at Yucca Mountain, Nevada

    International Nuclear Information System (INIS)

    Stahl, D.; Svinicki, K.

    1996-01-01

    This paper addresses the process for the acceptance of waste into the waste management system (WMS) with a focus on the detailed requirements identified from the Waste Acceptance System Requirements Document. Also described is the recent dialogue between OCRWM and the Office of Environmental Management to resolve issues, including the appropriate interpretation and application of regulatory and system requirements to DOE-owned spent fuel. Some information is provided on the design of the repository system to aid the reader in understanding how waste that is accepted into the WMS is received and emplaced in the repository

  6. Parental Perceptions and Recommendations of Computing Majors: A Technology Acceptance Model Approach

    Science.gov (United States)

    Powell, Loreen; Wimmer, Hayden

    2017-01-01

    Currently, there are more technology related jobs then there are graduates in supply. The need to understand user acceptance of computing degrees is the first step in increasing enrollment in computing fields. Additionally, valid measurement scales for predicting user acceptance of Information Technology degree programs are required. The majority…

  7. 50 CFR 84.40 - What conditions must I follow to accept Federal grant money?

    Science.gov (United States)

    2010-10-01

    ... Federal grant money? 84.40 Section 84.40 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE... COASTAL WETLANDS CONSERVATION GRANT PROGRAM Conditions on Acceptance/Use of Federal Money § 84.40 What conditions must I follow to accept Federal grant money? (a) The audit requirements for State and local...

  8. Acceptance test report for portable exhauster POR-007/Skid E

    International Nuclear Information System (INIS)

    Kriskovich, J.R.

    1998-01-01

    This document describes Acceptance Testing performed on Portable Exhauster POR-007/Skid E. It includes measurements of bearing vibration levels, pressure decay testing, programmable logic controller interlocks, high vacuum, flow and pressure control functional testing. The purpose of Acceptance testing documented by this report was to demonstrate compliance of the exhausters with the performance criteria established within HNF-0490, Rev. 1 following a repair and upgrade effort at Hanford. In addition, data obtained during this testing is required for the resolution of outstanding Non-conformance Reports (NCR), and finally, to demonstrate the functionality of the associated software for the pressure control and high vacuum exhauster operating modes provided for by W-320. Additional testing not required by the ATP was also performed to assist in the disposition and close out of receiving inspection report and for application design information (system curve). Results of this testing are also captured within this document

  9. Mental health professionals' acceptance of online counseling

    OpenAIRE

    Lazuras, Lambros; Dokou, Anna

    2016-01-01

    The development of online counseling services has followed the advent on information and communication technologies. The present study assessed mental health professionals' perspectives of online counseling by using an extended version of the technology acceptance model. Participants completed anonymous structured questionnaires assessing technology acceptance-related variables, including perceived usefulness and ease of use, usage intentions, job relevance, social norms, attitudes, computer ...

  10. 12 CFR 7.1007 - Acceptances.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Acceptances. 7.1007 Section 7.1007 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY BANK ACTIVITIES AND OPERATIONS Bank Powers... financing credit transactions. Bankers' acceptances may be used for such purpose, since the making of...

  11. Perceptions of acceptable conducts by university students

    Directory of Open Access Journals (Sweden)

    Dora Nazaré Marques

    2016-07-01

    Conclusion: Academic misconducts were mainly considered more acceptable than professional misconducts. Our results show that perceptions of acceptable conducts amongst optometry students are not very different from other students, and, against our initial prediction, do not show a general change in misconduct perception when students become more mature. Universities should pay more attention to this problem and take action.

  12. Differences in HIV vaccine acceptability between genders

    Science.gov (United States)

    Kakinami, Lisa; Newman, Peter A.; Lee, Sung-Jae; Duan, Naihua

    2010-01-01

    The development of safe and efficacious preventive HIV vaccines offers the best long-term hope of controlling the AIDS pandemic. Nevertheless, suboptimal uptake of safe and efficacious vaccines that already exist suggest that HIV vaccine acceptability cannot be assumed, particularly among communities most vulnerable to HIV. The present study aimed to identify barriers and motivators to future HIV vaccine acceptability among low socioeconomic, ethnically diverse men and women in Los Angeles County. Participants completed a cross-sectional survey assessing their attitudes and beliefs regarding future HIV vaccines. Hypothetical HIV vaccine scenarios were administered to determine HIV vaccine acceptability. Two-sided t-tests were performed, stratified by gender, to examine the association between vaccine acceptability and potential barriers and motivators. Barriers to HIV vaccine acceptability differed between men and women. For women, barriers to HIV vaccine acceptability were related to their intimate relationships (p Motivators for women included the ability to conceive a child without worrying about contracting HIV (p Motivators for men included feeling safer with sex partners (p motivator for both men and women (p <0.10). Gender-specific interventions may increase vaccine acceptability among men and women at elevated risk for HIV infection. Among women, interventions need to focus on addressing barriers due to gendered power dynamics in relationships and discrimination in health care. Among men, education that addresses fears and misconceptions about adverse effects of HIV vaccination on health and the importance of vaccination as one component of integrated HIV prevention may increase vaccine acceptability. PMID:18484322

  13. A Distributive Model of Treatment Acceptability

    Science.gov (United States)

    Carter, Stacy L.

    2008-01-01

    A model of treatment acceptability is proposed that distributes overall treatment acceptability into three separate categories of influence. The categories are comprised of societal influences, consultant influences, and influences associated with consumers of treatments. Each of these categories are defined and their inter-relationships within…

  14. Nuclear law and public acceptance

    International Nuclear Information System (INIS)

    Muguet, Tania Mara F.

    2009-01-01

    After the fission of the atom and its use for military purposes, the imposition of controls and restrictions to prevent the proliferation of atomic weapons was established and led to the drafting of a series of international conventions to promote the harmonization of domestic legislation. In this context, to provide a legal framework for conducting activities related to nuclear energy and ionizing radiation, in a manner that adequately protects individuals, property and environment, the nuclear energy law was created and widely adopted. To better control the risks associated with the use of nuclear energy and in order to adapt its technological developments in constant state of evolution, a growing body of international law of nuclear energy is emerging from instruments (universal, regional, bilateral and multilateral) to impose obligation in the use of the technology. In sum, changes in technological, economic, political or social conditions created the need for legal solutions and the public understanding and confidence in the peaceful uses of nuclear energy requires extensive information to be made available on the risks and benefits to stakeholders (effected public, press, media, and legislators etc.). (author)

  15. Consumer acceptance of irradiated produce

    International Nuclear Information System (INIS)

    Terry, D.E.; Tabor, R.L.

    1988-01-01

    Food irradiation is a process that uses ionizing radiation to affect physically and interact with the atoms and molecules that make up foods and food contaminants, causing chemical and biological consequences which can be used in beneficial ways (Urbain, 1986). On April 18, 1986, ionizing radiation applications were expanded to include treatment of fresh fruits and vegetables at doses up to 1kGy, or 100 krad (Kader, 1986). At this time, the Food and Drug Administration also required that all irradiated food products sold in retail packages be labeled with a symbol (Figure 1) and the statement, “treated by irradiation” (or “irradiated”). The statement also may describe the type of radiation used, as well as its purpose, e.g. “treated with gamma radiation to extend shelf life.” Additional information, such as “this treatment does not induce radioactivity,” may be included for educational purposes. Current legislation allows for the removal of the wording “treated by irradiation” (or “irradiated”) after April 18, 1988

  16. Nuclear law and public acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Muguet, Tania Mara F. [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil). Coordenacao Geral de Assuntos Internacionais], e-mail: tmuguet@cnen.gov.br

    2009-07-01

    After the fission of the atom and its use for military purposes, the imposition of controls and restrictions to prevent the proliferation of atomic weapons was established and led to the drafting of a series of international conventions to promote the harmonization of domestic legislation. In this context, to provide a legal framework for conducting activities related to nuclear energy and ionizing radiation, in a manner that adequately protects individuals, property and environment, the nuclear energy law was created and widely adopted. To better control the risks associated with the use of nuclear energy and in order to adapt its technological developments in constant state of evolution, a growing body of international law of nuclear energy is emerging from instruments (universal, regional, bilateral and multilateral) to impose obligation in the use of the technology. In sum, changes in technological, economic, political or social conditions created the need for legal solutions and the public understanding and confidence in the peaceful uses of nuclear energy requires extensive information to be made available on the risks and benefits to stakeholders (effected public, press, media, and legislators etc.). (author)

  17. Understanding diversity: the importance of social acceptance.

    Science.gov (United States)

    Chen, Jacqueline M; Hamilton, David L

    2015-04-01

    Two studies investigated how people define and perceive diversity in the historically majority-group dominated contexts of business and academia. We hypothesized that individuals construe diversity as both the numeric representation of racial minorities and the social acceptance of racial minorities within a group. In Study 1, undergraduates' (especially minorities') perceptions of campus diversity were predicted by perceived social acceptance on a college campus, above and beyond perceived minority representation. Study 2 showed that increases in a company's representation and social acceptance independently led to increases in perceived diversity of the company among Whites. Among non-Whites, representation and social acceptance only increased perceived diversity of the company when both qualities were high. Together these findings demonstrate the importance of both representation and social acceptance to the achievement of diversity in groups and that perceiver race influences the relative importance of these two components of diversity. © 2015 by the Society for Personality and Social Psychology, Inc.

  18. Acceptable respiratory protection program and LASL respirator research

    International Nuclear Information System (INIS)

    Skaggs, B.J.

    1979-01-01

    A short history is presented on the LASL Respiratory Protection Training Programs. Then a discussion is given on the major points of an acceptable respiratory protection program utilizing the points required by the Occupational, Safety, and Health Administration (OSHA) Regulation 29 CFR 1910.134. Contributions to respirator research are reviewed. Discussion is presented under the following section headings: program administration; respirator selection; respirator use; fitting and training; respirator maintenance; medical clearance and surveillance; special problems; program evaluation; and documentation

  19. US Department of Energy acceptance of commercial transuranic waste

    International Nuclear Information System (INIS)

    Taboas, A.L.; Bennett, W.S.; Brown, C.M.

    1980-02-01

    Contaminated transuranic wastes generated as a result of non-defense activities have been disposed of by shallow land burial at a commercially operated (NECO) facility located on the Hanford federal reservation, which is licensed by the State of Washington and by the NRC. About 15,000 ft 3 of commercial TRU waste have been generated each year, but generation for the next three years could triple due to decontamination and decommissioning scheduled to start in 1980. Disposal at other commercial burial sites has been precluded due to sites closing or prohibitions on acceptance of transuranic wastes. The State of Washington recently modified the NECO-Hanford operating license, effective February 29, 1980, to provide that radioactive wastes contaminated with transuranics in excess of 10 nCi/g will not be accepted for disposal. Consistent with the state policy, the NRC amended the NECO special nuclear material license so that Pu in excess of 10n Ci/g cannot be accepted after February 29, 1980. As a result, NRC requested DOE to examine the feasibility of accepting these wastes at a DOE operated site. TRU wastes accepted by the DOE would be placed in retrievable storage in accordance with DOE policy which requires retrievable storage of transuranic wastes pending final disposition in a geologic repository. DOE transuranic wastes are stored at six major DOE sites: INEL, Hanford, LASL, NTS, ORNL, and SRP. A specific site for receiving commercial TRU waste has not yet been selected. Shipments to DOE-Hanford would cause the least disruption to past practices. Commercial TRU wastes would be subject to waste form and packaging criteria established by the DOE. The waste generators would be expected to incur all applicable costs for DOE to take ownership of the waste, and provide storage, processing, and repository disposal. The 1980 charge to generators for DOE acceptance of commercial TRU waste is $147 per cubic foot

  20. Implementation and acceptance of dynamic MLC for IMRT and VMAT

    International Nuclear Information System (INIS)

    Garcia, B.; Marquina, J.; Ramirez, J.; Gonzales, A.

    2014-08-01

    The use of Multi-leaf Collimator (MLC) in Intensity-Modulated Radiation Therapy (IMRT) for dynamic treatment techniques as Volumetric Modulated Arc Therapy (VMAT) makes that the movement controls as the speed of the MLC are quantified by means of an acceptance test. The objective determination of the operation regulations of the radiotherapy equipment requires ideally the establishment of the quantitative relationship among the performance deviations and clinical results or some acceptable substitute. Different protocols exist detailed with parameters and acceptance ranges according to the MLC thickness. In our case the acceptance test was carried out for 120-MLC of Trilogy equipment brand Varian. For all the test were used 300-200 Um for each formed beam lets; source-surface distance (SSD) of 100 cm. 9 acceptance tests were used each one with different purposes like to quantify, synchronization, stability, complexity, precision, positioning, conformity, dynamic movements for the case of dynamic wedges, consecutive moves, among others, for the measurements were used film badges dosimetry (Gafchromic Ebt-3 scanner Epson expression 10000 XL); additionally the results were compared with a diodes arrangement Map-Check 2 brand Sun Nuclear; that consists of 1527 diodes prepared in a field of 32 x 26 cm located at a distance of 1 cm parallel, 0.5 cm diagonally. All the developed tests were inside the acceptance tolerance parameters when comparing the obtained result regarding the badges and the Map-Check was found a discrepancy of 0.01%, what gives a treatment certainty to the moment to impart volumetric dose in dynamic fields to the patients. (Author)

  1. Public acceptance in radioactive waste management

    International Nuclear Information System (INIS)

    Diaconu, Stela; Covreag, Ilinca

    2008-01-01

    Radioactive waste, unavoidable by-products of economically developed societies, arises from the production of energy by nuclear fission reactors as well as from medical, research and industrial applications of radioactive materials. The main objective of radioactive waste management is the safety as well the protection of public health and the environment. The first approach for the disposal of radioactive waste was based on the traditional 'decide, announce and defend' model, focused almost exclusively on technical content. In spite of the significant technical progress that would ensure long-term safety, the rate of progress towards implementing such solutions has been slower than expected, partly attributable to an earlier technical optimism and to an underestimation of the societal and political dimensions. It is now broadly recognized that radioactive waste management involves both technical and societal dimensions which cannot be dissociated. Because of changes in society's decision-making environment and heightened public sensitivity to all matters connected with environmental protection, nuclear power, radioactivity, and especially radioactive waste, any decision regarding whether, when and how to implement waste management solutions will typically require thorough public examination and the involvement of many relevant stakeholders. The building of a long-term relationship with the local communities and the waste management facility is one of the most important contributors to sustainable radioactive waste management solutions. A new approach in now in place at international level, based on 'engage, interact and co-operate', for which both technical and societal issues are to be reconciled. That means that the involvement of all interested parties in the decision-making process is a condition for a successful and publicly acceptable implementation of such a project. A central role in the public acceptance of nuclear technologies play the management and

  2. Stakeholder acceptance analysis: Passive soil vapor extraction using borehole flux

    International Nuclear Information System (INIS)

    Peterson, T.S.

    1995-12-01

    This report presents evaluations, recommendations, and requirements concerning passive soil vapor extraction (PSVE) derived from a three-year program of stakeholder involvement. PSVE takes advantage of the naturally occurring tendency of soil vapor to leave the subsurface during periods of low barometric pressure. PSVE seeks to expedite the release of volatile contaminants through the use of boreholes and technological enhancements. This report is for technology developers and those responsible for making decisions about the use of technology to remediate contamination by volatile organic compounds. Stakeholders' perspectives help those responsible for technology deployment to make good decisions concerning the acceptability and applicability of PSVE to the remediation problems they face. The report provides: stakeholders' final evaluation of the acceptability of PSVE in light of the technology's field test; stakeholders' principal comments concerning PSVE; requirements that stakeholders have of any remediation technology. Technology decision makers should take these conclusions into account in evaluating the effectiveness and acceptability of any remedial method proposed for their site. In addition, the report presents data requirements for the technology's field demonstration defined by stakeholders associated with the Hanford site in Washington State, as well as detailed comments on PSVE from stakeholders from Sandia National Laboratory, Rocky Flats, Idaho National Engineering Laboratory, and Los Alamos National Laboratory

  3. A pre-launch exploration of customer acceptance of usage based vehicle insurance policy

    Directory of Open Access Journals (Sweden)

    G. Rejikumar

    2013-03-01

    Full Text Available This study was designed against the backdrop of observations that the motor insurance pricing in India requires radical innovations to become more acceptable, fair, and affordable to customers. Customer perceptions about usage based pricing were collected using a structured questionnaire. The model containing critical variables was validated to identify statistically significant linkages among perceived individual benefits, perceived social benefits, perceived value, perceived easiness to understand and acceptance intentions. The perceived risk to privacy was not found to influence the acceptance intentions of the customer. The study concluded that customers are likely to accept the concept of usage based pricing once implemented.

  4. Blind and Deaf to Acceptance: The Role of Self-Esteem in Capitalizing on Social Acceptance

    OpenAIRE

    Luerssen, Anna Maud

    2013-01-01

    Across two studies, we evaluated whether people with low self-esteem are less likely to capitalize on, or take full advantage of, their romantic partners' accepting behaviors. We conceptualized capitalization as the tendency to perceive acceptance when it occurs, and to experience positive changes in affect and relationship satisfaction when acceptance is perceived. We found that participants with low self-esteem under-perceived their partners' acceptance, both in daily life and in the labora...

  5. What makes a contraceptive acceptable?

    Science.gov (United States)

    Berer, M

    1995-01-01

    The women's health movement is developing an increasing number of negative campaigns against various contraceptive methods based on three assumptions: 1) user-controlled methods are better for women than provider-controlled methods, 2) long-acting methods are undesirable because of their susceptibility to abuse, and 3) systemic methods carry unacceptable health risks to women. While these objections have sparked helpful debate, criticizing an overreliance on such methods is one thing and calling for bans on the provision of injectables and implants and on the development of vaccine contraceptives is another. Examination of the terms "provider-controlled," "user-controlled," and "long-acting" reveals that their definitions are not as clear-cut as opponents would have us believe. Some women's health advocates find the methods that are long-acting and provider-controlled to be the most problematic. They also criticize the near 100% contraceptive effectiveness of the long-acting methods despite the fact that the goal of contraception is to prevent pregnancy. It is wrong to condemn these methods because of their link to population control policies of the 1960s, and it is important to understand that long-acting, effective methods are often beneficial to women who require contraception for 20-22 years of their lives. Arguments against systemic methods (including RU-486 for early abortion and contraceptive vaccines) rebound around issues of safety. Feminists have gone so far as to create an intolerable situation by publishing books that criticize these methods based on erroneous conclusions and faulty scientific analysis. While women's health advocates have always rightly called for bans on abuse of various methods, they have not extended this ban to the methods themselves. In settings where other methods are not available, bans can lead to harm or maternal deaths. Another perspective can be used to consider methods in terms of their relationship with the user (repeated

  6. Project W-320, tank 241-C-106 sluicing acceptance for beneficial use

    International Nuclear Information System (INIS)

    BAILEY, J.W.

    1999-01-01

    The purpose of this document is to identify the Project W-320 Chiller Documentation required to be turned over from the Projects Organization to Tank Farm Operations as part of the acceptance of the new equipment for beneficial use

  7. Understanding social acceptance of electricity generation sources

    International Nuclear Information System (INIS)

    Bronfman, Nicolás C.; Jiménez, Raquel B.; Arévalo, Pilar C.; Cifuentes, Luis A.

    2012-01-01

    Social acceptability is a determinant factor in the failure or success of the government's decisions about which electricity generation sources will satisfy the growing demand for energy. The main goal of this study was to validate a causal trust-acceptability model for electricity generation sources. In the model, social acceptance of an energy source is directly caused by perceived risk and benefit and also by social trust in regulatory agencies (both directly and indirectly, through perceived risk and benefit). Results from a web-based survey of Chilean university students demonstrated that data for energy sources that are controversial in Chilean society (fossil fuels, hydro, and nuclear power) fit the hypothesized model, whereas data for non conventional renewable energy sources (solar, wind, geothermal and tidal) did not. Perceived benefit had the greatest total effect on acceptability, thus emerging as a key predictive factor of social acceptability of controversial electricity generation sources. Further implications for regulatory agencies are discussed. - Highlights: ► We tested a causal trust-acceptability model for electricity generation sources in Chile. ► Data for controversial energy sources in the Chilean society (fossil fuels, hydro and nuclear power) fit the hypothesized model. ► Data for non conventional renewable energy sources did not fit the data. ► Perceived benefit showed the greatest total effect on acceptability.

  8. Consumer Acceptance of Dry Dog Food Variations

    Science.gov (United States)

    Donfrancesco, Brizio Di; Koppel, Kadri; Swaney-Stueve, Marianne; Chambers, Edgar

    2014-01-01

    Simple Summary The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Pet owners evaluated dry dog food samples available in the US market. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Abstract The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Eight dry dog food samples available in the US market were evaluated by pet owners. In this study, consumers evaluated overall liking, aroma, and appearance liking of the products. Consumers were also asked to predict their purchase intent, their dog’s liking, and cost of the samples. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Overall liking clusters were not related to income, age, gender, or education, indicating that general consumer demographics do not appear to play a main role in individual consumer acceptance of dog food products. PMID:26480043

  9. Cone penetrometer moisture probe acceptance test report

    International Nuclear Information System (INIS)

    Barnes, G.A.

    1996-01-01

    This Acceptance Test Report (ATR) documents the results of WHC-SD-WM-ATP-146 (Prototype Cone Penetrometer Moisture Probe Acceptance Test Procedure) and WHC-SD-WM-ATP-145 (Cone Penetrometer Moisture Probe Acceptance Test Procedure). The master copy of WHC-SD-WM-ATP-145 can be found in Appendix A and the master copy of WHC-SD-WM-ATP-146 can be found in Appendix B. Also included with this report is a matrix showing design criteria of the cone penetrometer moisture probe and the verification method used (Appendix C)

  10. Approaches to acceptable risk: a critical guide

    Energy Technology Data Exchange (ETDEWEB)

    Fischhoff, B.; Lichtenstein, S.; Slovic, P.; Keeney, R.; Derby, S.

    1980-12-01

    Acceptable-risk decisions are an essential step in the management of technological hazards. In many situations, they constitute the weak (or missing) link in the management process. The absence of an adequate decision-making methodology often produces indecision, inconsistency, and dissatisfaction. The result is neither good for hazard management nor good for society. This report offers a critical analysis of the viability of various approaches as guides to acceptable-risk decisions. This report seeks to define acceptable-risk decisions and to examine some frequently proposed, but inappropriate, solutions. 255 refs., 22 figs., 25 tabs.

  11. Multimodal Counseling Interventions: Effect on Human Papilloma Virus Vaccination Acceptance

    Directory of Open Access Journals (Sweden)

    Oroma Nwanodi

    2017-11-01

    Full Text Available Human papilloma virus (HPV vaccine was developed to reduce HPV-attributable cancers, external genital warts (EGW, and recurrent respiratory papillomatosis. Adolescent HPV vaccination series completion rates are less than 40% in the United States of America, but up to 80% in Australia and the United Kingdom. Population-based herd immunity requires 80% or greater vaccination series completion rates. Pro-vaccination counseling facilitates increased vaccination rates. Multimodal counseling interventions may increase HPV vaccination series non-completers’ HPV-attributable disease knowledge and HPV-attributable disease prophylaxis (vaccination acceptance over a brief 14-sentence counseling intervention. An online, 4-group, randomized controlled trial, with 260 or more participants per group, found that parents were more likely to accept HPV vaccination offers for their children than were childless young adults for themselves (68.2% and 52.9%. A combined audiovisual and patient health education handout (PHEH intervention raised knowledge of HPV vaccination purpose, p = 0.02, and HPV vaccination acceptance for seven items, p < 0.001 to p = 0.023. The audiovisual intervention increased HPV vaccination acceptance for five items, p < 0.001 to p = 0.006. That HPV causes EGW, and that HPV vaccination prevents HPV-attributable diseases were better conveyed by the combined audiovisual and PHEH than the control 14-sentence counseling intervention alone.

  12. Multimodal Counseling Interventions: Effect on Human Papilloma Virus Vaccination Acceptance.

    Science.gov (United States)

    Nwanodi, Oroma; Salisbury, Helen; Bay, Curtis

    2017-11-06

    Human papilloma virus (HPV) vaccine was developed to reduce HPV-attributable cancers, external genital warts (EGW), and recurrent respiratory papillomatosis. Adolescent HPV vaccination series completion rates are less than 40% in the United States of America, but up to 80% in Australia and the United Kingdom. Population-based herd immunity requires 80% or greater vaccination series completion rates. Pro-vaccination counseling facilitates increased vaccination rates. Multimodal counseling interventions may increase HPV vaccination series non-completers' HPV-attributable disease knowledge and HPV-attributable disease prophylaxis (vaccination) acceptance over a brief 14-sentence counseling intervention. An online, 4-group, randomized controlled trial, with 260 or more participants per group, found that parents were more likely to accept HPV vaccination offers for their children than were childless young adults for themselves (68.2% and 52.9%). A combined audiovisual and patient health education handout (PHEH) intervention raised knowledge of HPV vaccination purpose, p = 0.02, and HPV vaccination acceptance for seven items, p HPV vaccination acceptance for five items, p HPV causes EGW, and that HPV vaccination prevents HPV-attributable diseases were better conveyed by the combined audiovisual and PHEH than the control 14-sentence counseling intervention alone.

  13. Preparing to Accept Research Data: Creating Guidelines for Librarians

    Directory of Open Access Journals (Sweden)

    Laura B. Palumbo

    2015-11-01

    Full Text Available Rutgers University Libraries have recognized the need to expand their current research data services into a well-documented and well-supported service available to the Rutgers research community. In 2005, Rutgers University Libraries created RUcore, Rutgers University Community Repository, which has served as the University’s formal repository for institutional scholarship, special collections, and Electronic Theses & Dissertations. With the impetus of the 2010 NSF directive for research data sharing and preservation, RUcore development was extended to accept research data content. Ingest of pilot data projects began in 2010 via a librarian-mediated process. In order to provide a better defined workflow and mission for research data services, in July 2014, the Rutgers University Librarian organized a Task Force to investigate the evaluation process for technical, legal, and confidential issues involved in research data acceptance, and to establish an administrative and evaluation framework for the deposit of research data. After a review of 35 repositories using 34 criteria, the Task Force drafted a plan for research data acceptance which proposes wide-spread acceptance of mediated data projects, and prepares for future self-deposit in an online interface. This paper will discuss the issues addressed by the Task Force; acknowledging ownership of data through an institutional data policy, preventing exposure of confidential or sensitive data, establishing a reconfigured data team, requirements for storage capacity and funding, creating a workflow which includes collaboration with research offices, and offering guidance for both researchers and librarians working with research data.

  14. Review of issues relevant to acceptable risk criteria for nuclear waste management

    International Nuclear Information System (INIS)

    Cohen, J.J.

    1978-01-01

    Development of acceptable risk criteria for nuclear waste management requires the translation of publicly determined goals and objectives into definitive issues which, in turn, require resolution. Since these issues are largely of a subjective nature, they cannot be resolved by technological methods. Development of acceptable risk criteria might best be accomplished by application of a systematic methodology for the optimal implementation of subjective values. Multi-attribute decision analysis is well suited for this purpose

  15. Acceptance criteria for non-destructive examination of double-shell tanks

    International Nuclear Information System (INIS)

    Jensen, C.E.

    1995-09-01

    This supporting document provides requirements for acceptance of relevant indications found during non-destructive examination of double-shell tanks (DSTs) at Hanford 200 areas. Requirements for evaluation of relevant indications are provided to determine acceptability of continued safe operation of the DSTs. Areas of the DSTs considered include the tank wall vapor space, liquid-vapor interface, wetted tank wall, sludge-liquid interface, and the knuckle region

  16. [Acceptance and mindfulness-based cognitive-behavioral therapies].

    Science.gov (United States)

    Ngô, Thanh-Lan

    2013-01-01

    individual to undertake actions required in order to enhance quality of life. In the case of chronic illness, it diminishes suffering by increasing acceptance. Although the evidence base supporting the efficacy of third wave approaches is less robust than in the case of traditional cognitive or behavior therapy, therapies based on mindfulness meditation and acceptance are promising interventions that might help to elucidate change process and offer complementary strategies in order to help patients.

  17. Preparation of acceptance tests and criteria for the Test Blanket Systems to be operated in ITER

    Energy Technology Data Exchange (ETDEWEB)

    Laan, J.G. van der, E-mail: JaapG.vanderLaan@iter.org [ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St Paul Lez Durance Cedex (France); Cuquel, B. [AIRBUS Defence and Space S.A.S., 13115 Saint Paul Lez Durance (France); Demange, D.; Ghidersa, B.-E. [Karlsruhe Institute of Technology, Karlsruhe (Germany); Giancarli, L.M.; Iseli, M.; Jourdan, T. [ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St Paul Lez Durance Cedex (France); Nevière, J.-C. [Comex-Nucleaire, 13115 Saint Paul Lez Durance (France); Pascal, R.; Ring, W. [ITER Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St Paul Lez Durance Cedex (France)

    2015-10-15

    Highlights: • Initial guideline for acceptance testing and acceptance criteria for Test Blanket Systems in ITER. • These tests complement those required by the applicable codes and standards, and regulations. • Completion of TBS manufacture will be followed by Factory Acceptance Testing, prior to shipment. • Next steps are “Reception Inspection Tests”, and on-site pre-installation and components tests. • This guideline allows the detailing of the TBS specific test plans and their scheduling. - Abstract: This paper describes the main acceptance criteria and required acceptance tests for the components of the six Test Blanket Systems to be installed and operated in ITER. It summarizes the guide-line toward the establishment of detailed test plans for the TBS, starting from the end-product at the ITER Members factories, and to generally define the type of tests that have to be performed on the ITER site after shipment, and/or prior to the systems final commissioning phase.

  18. Acceptance Testing of Thermoluminescent Dosimeter Holders.

    Science.gov (United States)

    Romanyukha, Alexander; Grypp, Matthew D; Sharp, Thad J; DiRito, John N; Nelson, Martin E; Mavrogianis, Stanley T; Torres, Jeancarlo; Benevides, Luis A

    2018-05-01

    The U.S. Navy uses the Harshaw 8840/8841 dosimetric (DT-702/PD) system, which employs LiF:Mg,Cu,P thermoluminescent dosimeters (TLDs), developed and produced by Thermo Fisher Scientific (TFS). The dosimeter consists of four LiF:Mg,Cu,P elements, mounted in Teflon® on an aluminum card and placed in a plastic holder. The holder contains a unique filter for each chip made of copper, acrylonitrile butadiene styrene (ABS), Mylar®, and tin. For accredited dosimetry labs, the ISO/IEC 17025:2005(E) requires an acceptance procedure for all new equipment. The Naval Dosimetry Center (NDC) has developed and tested a new non-destructive procedure, which enables the verification and the evaluation of embedded filters in the holders. Testing is based on attenuation measurements of low-energy radiation transmitted through each filter in a representative sample group of holders to verify that the correct filter type and thickness are present. The measured response ratios are then compared with the expected response ratios. In addition, each element's measured response is compared to the mean response of the group. The test was designed and tested to identify significant nonconformities, such as missing copper or tin filters, double copper or double tin filters, or other nonconformities that may impact TLD response ratios. During the implementation of the developed procedure, testing revealed a holder with a double copper filter. To complete the evaluation, the impact of the nonconformities on proficiency testing was examined. The evaluation revealed failures in proficiency testing categories III and IV when these dosimeters were irradiated to high-energy betas.

  19. Chinese Nurses' Acceptance of PDA: A Cross-Sectional Survey Using a Technology Acceptance Model.

    Science.gov (United States)

    Wang, Yanling; Xiao, Qian; Sun, Liu; Wu, Ying

    2016-01-01

    This study explores Chinese nurses' acceptance of PDA, using a questionnaire based on the framework of Technology Acceptance Model (TAM). 357 nurses were involved in the study. The results reveal the scores of the nurses' acceptance of PDA were means 3.18~3.36 in four dimensions. The younger of nurses, the higher nurses' title, the longer previous usage time, the more experienced using PDA, and the more acceptance of PDA. Therefore, the hospital administrators may change strategies to enhance nurses' acceptance of PDA, and promote the wide application of PDA.

  20. Overview of social acceptability of nuclear energy

    Energy Technology Data Exchange (ETDEWEB)

    Ibrahim, Jamal Khaer [PUSPATI, Selangor (Malaysia)

    1984-12-01

    A comparative evaluation for the role of nuclear energy in the Society is overviewed. Factors pertaining to its social acceptability such as military connotation, radioactive waste management and nuclear plant safety, to name a few, are also discussed.

  1. 7 CFR 1210.323 - Acceptance.

    Science.gov (United States)

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE WATERMELON RESEARCH AND PROMOTION PLAN Watermelon Research and Promotion Plan National Watermelon Promotion Board § 1210.323 Acceptance...

  2. 7 CFR 1207.323 - Acceptance.

    Science.gov (United States)

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN Potato Research and Promotion Plan National Potato Promotion Board § 1207.323 Acceptance. Each person...

  3. Consumer Acceptance of Dry Dog Food Variations

    Directory of Open Access Journals (Sweden)

    Brizio Di Donfrancesco

    2014-06-01

    Full Text Available The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Eight dry dog food samples available in the US market were evaluated by pet owners. In this study, consumers evaluated overall liking, aroma, and appearance liking of the products. Consumers were also asked to predict their purchase intent, their dog’s liking, and cost of the samples. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Overall liking clusters were not related to income, age, gender, or education, indicating that general consumer demographics do not appear to play a main role in individual consumer acceptance of dog food products.

  4. Integrated Model for E-Learning Acceptance

    Science.gov (United States)

    Ramadiani; Rodziah, A.; Hasan, S. M.; Rusli, A.; Noraini, C.

    2016-01-01

    E-learning is not going to work if the system is not used in accordance with user needs. User Interface is very important to encourage using the application. Many theories had discuss about user interface usability evaluation and technology acceptance separately, actually why we do not make it correlation between interface usability evaluation and user acceptance to enhance e-learning process. Therefore, the evaluation model for e-learning interface acceptance is considered important to investigate. The aim of this study is to propose the integrated e-learning user interface acceptance evaluation model. This model was combined some theories of e-learning interface measurement such as, user learning style, usability evaluation, and the user benefit. We formulated in constructive questionnaires which were shared at 125 English Language School (ELS) students. This research statistics used Structural Equation Model using LISREL v8.80 and MANOVA analysis.

  5. Influence Processes for Information Technology Acceptance

    DEFF Research Database (Denmark)

    Bhattacherjee, Anol; Sanford, Clive Carlton

    2006-01-01

    This study examines how processes of external influence shape information technology acceptance among potential users, how such influence effects vary across a user population, and whether these effects are persistent over time. Drawing on the elaboration-likelihood model (ELM), we compared two...... alternative influence processes, the central and peripheral routes, in motivating IT acceptance. These processes were respectively operationalized using the argument quality and source credibility constructs, and linked to perceived usefulness and attitude, the core perceptual drivers of IT acceptance. We...... further examined how these influence processes were moderated by users' IT expertise and perceived job relevance and the temporal stability of such influence effects. Nine hypotheses thus developed were empirically validated using a field survey of document management system acceptance at an eastern...

  6. Gas characterization system software acceptance test procedure

    International Nuclear Information System (INIS)

    Vo, C.V.

    1996-01-01

    This document details the Software Acceptance Testing of gas characterization systems. The gas characterization systems will be used to monitor the vapor spaces of waste tanks known to contain measurable concentrations of flammable gases

  7. Alternative methods of flexible base compaction acceptance.

    Science.gov (United States)

    2012-11-01

    "This report presents the results from the second year of research work investigating issues with flexible base acceptance testing within the Texas Department of Transportation. This second year of work focused on shadow testing non-density-based acc...

  8. Gas characterization system software acceptance test report

    International Nuclear Information System (INIS)

    Vo, C.V.

    1996-01-01

    This document details the results of software acceptance testing of gas characterization systems. The gas characterization systems will be used to monitor the vapor spaces of waste tanks known to contain measurable concentrations of flammable gases

  9. determinants of tuberculosis services acceptance among patients

    African Journals Online (AJOL)

    J MUGUMBATE

    stigmatization on acceptance of tuberculosis services in government hospitals in Oyo State, ... tuberculosis. It usually attacks the lungs but can also affect other parts of the .... out that, stigma among Mexican immigrants in Califonia significantly ...

  10. Waste acceptance product specifications for vitrified high-level waste forms

    International Nuclear Information System (INIS)

    Applewhite-Ramsey, A.; Sproull, J.F.

    1994-01-01

    The Department of Energy (DOE) Office of Environmental Restoration and Waste Management (EM) has developed Waste Acceptance Product Specifications (EM-WAPS). The EM-WAPS will be the basis for defining product acceptance criteria compatible with the requirements of the Civilian Radioactive Waste Management System (CRWMS). The relationship between the EM-WAPS and the CRWMS Systems Requirements document (WA-SRD) will be discussed. The impact of the EM-WAPS on the Savannah River Sit (SRS) Defense Waste Processing Facility's (DWPF) Waste Acceptance Program, Waste Qualification Run planning, and startup schedule will also be reported. 14 refs., 2 tabs

  11. Perceptions of acceptable conducts by university students.

    Science.gov (United States)

    Marques, Dora Nazaré; Macedo, António Filipe

    2016-01-01

    To determine perceptions of acceptable conducts amongst under and postgraduate optometry students and to compare them with students from other disciplines. Students (under/postgraduate) of optometry (n=156) and other courses (n=54) from University of Minho participated in a voluntary online questionnaire about perception of conducts, classifying as acceptable or unacceptable 15 academic or professional scenarios. 210 questionnaires were analyzed. Differences in perceptions were found between optometry under and postgraduates in scenario 5, Chi-square(2,156)=4.3, p=0.038, and scenario 7, Chi-square(2,156)=7.0, p=0.008 (both with cheating more acceptable for postgrads). Differences between under and postgraduates from other courses were found in scenario 9 (taking supplies from classroom more acceptable for undergrads), Chi-square(1,54)=5.0, p=0.025, and scenario 14 (forging a signature more acceptable for postgrads), Chi-square(1,54)=3.9, p=0.046. Differences between optometry and other courses undergraduates were observed in scenario 2 (plagiarism more acceptable for optometry undergrads), Chi-square(1,154)=8.3, p=0.004 and scenario 9 (taking supplies from classroom more acceptable for other undergrads), chi-square(1,54)=7.8, p=0.005. Differences between optometry and other courses postgraduates were observed in scenario 7, Chi-square(1,56)=5.8, p=0.016, scenario 10 (both with cheating more acceptable for optometry postgrads), chi-square(1,54)=8.1, p=0.004 and scenario 14 (forging a signature more acceptable for other postgrads), Chi-square(1,54)=6.1, p=0.026. Academic misconducts were mainly considered more acceptable than professional misconducts. Our results show that perceptions of acceptable conducts amongst optometry students are not very different from other students, and, against our initial prediction, do not show a general change in misconduct perception when students become more mature. Universities should pay more attention to this problem and take

  12. Acceptance Test Plan for ANSYS Software

    International Nuclear Information System (INIS)

    CREA, B.A.

    2000-01-01

    This plan governs the acceptance testing of the ANSYS software (Full Mechanical Release 5.5) for use on Project Word Management Contract (PHMC) computer systems (either UNIX or Microsoft Windows/NT). There are two phases to the acceptance testing covered by this test plan: program execution in accordance with the guidance provided in installation manuals; and ensuring results of the execution are consistent with the expected physical behavior of the system being modeled

  13. Key factors of teenagers' mobile advertising acceptance

    OpenAIRE

    Martí Parreño, José; Sanz Blas, Silvia; Ruiz Mafé, Carla; Aldás Manzano, Joaquín

    2013-01-01

    Purpose – The purpose of this paper is to analyse key drivers of teenagers’ attitude toward mobile advertising and its effects on teenagers’ mobile advertising acceptance. Design/methodology/approach – A proposed model of affective (irritation and entertainment) and cognitive (perceived usefulness) antecedents of attitude toward mobile advertising and its effects on mobile advertising acceptance is analysed. The sample consisted of 355 Spanish teenagers. The model was tested us...

  14. 20 CFR 655.152 - Advertising requirements.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Advertising requirements. 655.152 Section 655... Employment in the United States (H-2A Workers) Post-Acceptance Requirements § 655.152 Advertising requirements. All advertising conducted to satisfy the required recruitment activities under § 655.151 must...

  15. Acceptance of premarital health counseling in riyadh city, 1417h.

    Science.gov (United States)

    Al-Kahtani, N H

    2000-05-01

    Health counseling before marriage can be a most worthwhile and satisfying aspect of preventive medicine. It is important in genetic diagnosis and the prevention of hereditary, sexually transmitted and other infectious diseases. To determine the acceptance of the concept of Premarital Health Counseling (PMHC), and to identify some factors, which may efect this acceptance among Saudis who attend Primary Health Care Center in Riyadh, Kingdom of Saudi Arabia (KSA), 1417H. The present study is a cross-sectional one with a selected sample of Saudis who attended the Primary Health Care Centers in Riyadh during the year 1417H. A multistage sampling and equal allocation stratified sampling within was used to select 484 persons comprising an equal number of males and females, married and single above the age of 18 years. A pre-designed pre-tested questionnaire sheet was used to collect the required data, which were then tabulated and statistically analyzed. The study indicated that 364 (75.2%) of the study population accepted the concept of Premarital Health Counseling. PMHC was positively affected by the advancing age, experience of marriage, educational level and well-understood Islamic-health related issues. Out f those who accepted the concept, 273 (75%) agreed on the exchange of PMHC certificates between couples to be married and 152 (42%) agreed on the implementation of legislation on PMHC. Also, 298 (82%) of them wanted PMHC to be confidential and 168 (46%) agreed to the concept despite its cost. As regards the location of PMHC, most of participants who agreed to PMHC would prefer it to be given at governmental establishments. The study recommended the implementation of PMHC in Saudi Arabia, since it was accepted by the study population. However, further studies should be carried out to determine the details to be incorporated in the PMHC, their implementation and legislation on demographic basis of the Saudi community. Also, a community health education program for

  16. Acceptance test for graphite components and construction status of HTTR

    International Nuclear Information System (INIS)

    Iyoku, T.; Ishihara, M.; Maruyama, S.; Shiozawa, S.; Tsuji, N.; Miki, T.

    1996-01-01

    In March, 1991, the Japan Atomic Energy Research Institute (JAERI) started to constructed the High Temperature engineering Test Reactor(HTTR) which is a 30-MW(thermal) helium gas-cooled reactor with a core composed of prismatic graphite blocks piled on the core support graphite structures. Two types of graphite materials are used in the HTTR. One is the garde IG-110, isotropic fine grain graphite, another is the grade PGX, medium-to-fine grained molded graphite. These materials were selected on the basis of the appropriate properties required by the HTTR reactor design. Industry-wide standards for an acceptance test of graphite materials used as main components of a nuclear reactor had not been established. The acceptance standard for graphite components of the HTTR, therefore, was drafted by JAERI and reviewed by specialists outside JAERI. The acceptance standard consists of the material testing, non-destructive examination such as the ultrasonic and eddy current testings, dimensional and visual inspections and assembly test. Ultrasonic and eddy current testings are applied to graphite logs to detect an internal flaw and to graphite components to detect a surface flaw, respectively. The assembly test is performed at the works, prior to their installation in the reactor pressure vessel, to examine fabricating precision of each component and alignment of piled-up structures. The graphite components of the HTTR had been tested on the basis of the acceptance standard. It was confirmed that the graphite manufacturing process was well controlled and high quality graphite components were provided to the HTTR. All graphite components except for the fuel graphite blocks are to be installed in the reactor pressure vessel of the HTTR in September 1995. The paper describes the construction status of the HTTR focusing on the graphite components. The acceptance test results are also presented in this paper. (author). Figs

  17. Acceptance for Beneficial Use Pumping Instrumentation and Control Skid N

    International Nuclear Information System (INIS)

    KOCH, M.R.

    2000-01-01

    This is a final Acceptance for Beneficial Use (ABU) for Pumping and Instrumentation Control (PIC) skid ''N''. PIC skid ''N'' is ready for pumping tank U-109. All the testing and documentation has been completed as required on the AE3U checklist. This AE3U covers only the readiness of the PIC skid ''N''. Other U-farm preparations including dilution tank fabrication, portable exhauster readiness, leak detection, valve pit preparation, and the Operation Control Station readiness are not part of this ABU. PIC skid ''N'' is a new skid fabricated and tested at Site Fabrication Services. The skid controls the jet pump and monitors various instruments associated with the pumping operation. This monitoring includes leak detection along the waste transfer route and flammable gases in the pump pit. This Acceptance for Beneficial Use documents that Pumping Instrumentation and Control (PIC) skid ''N'' is ready for field use. This document does not cover the field installation or operational testing

  18. National Seminar. Acceptation and Commerce of Irradiated Foods. Memories

    International Nuclear Information System (INIS)

    1998-01-01

    The foods availability is a worldwide problem at present, it looks two paradoxical aspects at first appearance. The malnutrition grade and the great losses by rottenness after the harvest time. An alternative to reduce these losses is the use of modern technologies such as food irradiation, which is a recognized process as like as secure and efficient how a conservation process by the FAO, the WHO and the Codex Alimentarius Commission. At present this process is accepted in 40 countries. Since 1986 the National Institute of Nuclear Research in Mexico offers irradiation services to the dried foods enterprises. This work contains magistral conferences dictated by international experts, reflecting the situation of this technology at the present time, the consumer position about the acceptance of irradiated foods, as well as regulations and standards applied in different continents. In the process part there are the installations would be required and the control to carry out. (Author)

  19. Acceptance of Smartphone in Enhancing Patient-Caregivers Relationship

    Directory of Open Access Journals (Sweden)

    Wan Khairuzzaman Wan Ismail

    2012-09-01

    Full Text Available Patients may take more initiative to give more attention to their health as well as foster closer relationship with the caregivers and this has been made possible through smartphone. This paper investigates the perceived usefulness of smartphone among healthcare personnel in a private hospital setting. The study has identified elements which have had impact on individual decision to use smartphones using Technology Acceptance Model (TAM. Questionnaires were distributed to 57 respondents including medical doctors, nurses and head of department of a hospital. The analysis shows that the younger generations were more ‘trendy’ in owning a Smartphone. The study indicates that females reported better acceptance of smartphone use in their works. Healthcare industry will be more patient-centric instead of doctor-centric, hence, it is important for healthcare providers to provide services in line with the customers’ requirement without jeopardizing patient safety and lives.

  20. MCO combustible gas management leak test acceptance criteria; TOPICAL

    International Nuclear Information System (INIS)

    SHERRELL, D.L.

    1999-01-01

    Existing leak test acceptance criteria for mechanically sealed and weld sealed multi-canister overpacks (MCO) were evaluated to ensure that MCOs can be handled and stored in stagnant air without compromising the Spent Nuclear Fuel Project's overall strategy to prevent accumulation of combustible gas mixtures within MCO's or within their surroundings. The document concludes that the integrated leak test acceptance criteria for mechanically sealed and weld sealed MCOs (1 x 10(sup -5) std cc/sec and 1 x 10(sup -7) std cc/sec, respectively) are adequate to meet all current and foreseeable needs of the project, including capability to demonstrate compliance with the NFPA 60 Paragraph 3-3 requirement to maintain hydrogen concentrations[within the air atmosphere CSB tubes] t or below 1 vol% (i.e., at or below 25% of the LFL)

  1. Meal Replacement Mass Reduction Integration and Acceptability Study

    Science.gov (United States)

    Sirmons, T.; Douglas, G.; Schneiderman, J.; Slack, K.; Whitmire, A.; Williams, T.; Young, M.

    2018-01-01

    The Orion Multi-Purpose Crew Vehicle (MPCV) and future exploration missions are mass constrained; therefore we are challenged to reduce the mass of the food system by 10% while maintaining safety, nutrition, and acceptability to support crew health and performance for exploration missions. Meal replacement with nutritionally balanced, 700-900 calorie bars was identified as a method to reduce mass. However, commercially available products do not meet the requirements for a meal replacement in the spaceflight food system. The purpose of this task was to develop a variety of nutritionally balanced, high quality, breakfast replacement bars, which enable a 10% food mass savings. To date, six nutrient-dense meal replacement bars have been developed, all of which meet spaceflight nutritional, microbiological, sensory, and shelf-life requirements. The four highest scoring bars were evaluated based on final product sensory acceptability, nutritional stability, qualitative stability of analytical measurements (i.e. color and texture), and microbiological compliance over a period of two years to predict long-term acceptability. All bars maintained overall acceptability throughout the first year of storage, despite minor changes in color and texture. However, added vitamins C, B1, and B9 degraded rapidly in fortified samples of Banana Nut bars, indicating the need for additional development. In addition to shelf-life testing, four bar varieties were evaluated in the Human Exploration Research Analog (HERA), campaign 3, to assess the frequency with which actual meal replacement options may be implemented, based on impact to satiety and psychosocial measurements. Crewmembers (n=16) were asked to consume meal replacement bars every day for the first fifteen days of the mission and every three days for the second half of the mission. Daily surveys assessed the crew's responses to bar acceptability, mood, food fatigue and perceived stress. Preliminary results indicate that the

  2. Public acceptance activities by the Rokkasho project

    International Nuclear Information System (INIS)

    Ushida, Yasunori

    1993-01-01

    Japan Nuclear Fuel Limited, incorporated by mainly ten Japanese utilities, engages in constructing and operating nuclear fuel cycle facilities such as reprocessing, uranium enrichment and low level radioactive waste disposal at Rokkasho village in Aomori prefecture, 600 kilometers north of Tokyo, where is the most northern part of Honshu island. This presentation deals with the situation concerning the Rokkasho project and our public acceptance activities. The expansion of anti nuclear movement was spread not only Aomori prefecture but also all over Japan, affected strongly by the Chernobyl accident. In 1988,16 anti-nuclear groups including labor-union organized a committee for the purpose of a campaign to collect signatures for opposing nuclear fuel cycle facilities. Those groups brought in a lawsuit against the Japan Nuclear Fuel Limited, for stopping the construction of enrichment plant. Facing furious anti nuclear fuel cycle movements in Aomori prefecture, the Federation of Electric Power Companies decided to re strengthen the public acceptance activities and established the Nuclear Fuel Joint head office together with Japan Nuclear Fuel Service Co.and Japan Nuclear Fuel Industry Co. To this new organization many excellent members were dispatched from all electric power companies. The target area for public acceptance activities expanded from the surrounding area to all area of Aomori prefecture. The first policy of public acceptance activities is 'Appealing by face to face' which means the direct personal contact with people being anxious about nuclear fuel cycle facilities. The second main policy is 'Seeing the plant itself is better than persuading orally.' Survey conducted by a newspaper company in respect with the public acceptance of Rokkasho project in July 1989 July 1992 showed a favorable change of the public acceptance. However, one also has to recognize that most of people still have anxiety about the nuclear fuel cycle facilities and we shall

  3. Information technology acceptance in health information management.

    Science.gov (United States)

    Abdekhoda, M; Ahmadi, M; Dehnad, A; Hosseini, A F

    2014-01-01

    User acceptance of information technology has been a significant area of research for more than two decades in the field of information technology. This study assessed the acceptance of information technology in the context of Health Information Management (HIM) by utilizing Technology Acceptance Model (TAM) which was modified and applied to assess user acceptance of health information technology as well as viability of TAM as a research construct in the context of HIM. This was a descriptive- analytical study in which a sample of 187 personnel from a population of 363 personnel, working in medical records departments of hospitals affiliated to Tehran University of Medical Sciences, was selected. Users' perception of applying information technology was studied by a researcher-developed questionnaire. Collected data were analyzed by SPSS software (version16) using descriptive statistics and regression analysis. The results suggest that TAM is a useful construct to assess user acceptance of information technology in the context of HIM. The findings also evidenced the perceived ease of use (PEOU) and perceived usefulness (PE) were positively associated with favorable users' attitudes towards HIM. PU was relatively more associated (r= 0.22, p = 0.05) than PEOU (r = 0.014, p = 0.05) with favorable user attitudes towards HIM. Users' perception of usefulness and ease of use are important determinants providing the incentive for users to accept information technologies when the application of a successful HIM system is attempted. The findings of the present study suggest that user acceptance is a key element and should subsequently be the major concern of health organizations and health policy makers.

  4. Meal Replacement Mass Reduction and Integration Acceptability Study

    Science.gov (United States)

    Sirmons, T.; Barrett, A.; Richardson, M.; Arias, D.; Schneiderman, J.; Slack, K.; Williams, T.; Douglas, G.

    2017-01-01

    NASA, in planning for long-duration missions, has an imperative to provide a food system with the necessary nutrition, acceptability, and safety to ensure sustainment of crew health and performance. The Orion Multi-Purpose Crew Vehicle (MPCV) and future exploration missions are mass constrained; therefore the team is challenged to reduce the mass of the food system by 10% while maintaining product safety, nutrition, and acceptability. Commercially available products do not meet the nutritional requirements for a full meal replacement in the spaceflight food system, and it is currently unknown if daily meal replacements will impact crew food intake and psychosocial health over time. The purpose of this study was to develop a variety of nutritionally balanced breakfast replacement bars that meet spaceflight nutritional, microbiological, sensorial, and shelf-life requirements, while enabling a 10% savings in food mass. To date, six nutrient-dense meal replacement bars (approximately 700 calories per bar) have been developed, using traditional methods of compression as well as novel ultrasonic compression technologies developed by Creative Resonance Inc. (Phoenix, AZ). The four highest rated bars were evaluated in the Human Exploration Research Analog (HERA) to assess the frequency with which actual meal replacement options may be implemented. Specifically, overall impact of bars on mood, satiety, digestive discomfort, and satisfaction with food. These factors are currently being analyzed to inform successful implementation strategies where crew maintain adequate food intake. In addition, these bars are currently undergoing shelf-life testing to determine long-term sensory acceptability, nutritional stability, qualitative stability of analytical measurements (i.e. water activity and texture), and microbiological compliance over two years of storage at room temperature and potential temperature abuse conditions to predict long-term acceptability. It is expected that

  5. Video Game Acceptance: A Meta-Analysis of the Extended Technology Acceptance Model.

    Science.gov (United States)

    Wang, Xiaohui; Goh, Dion Hoe-Lian

    2017-11-01

    The current study systematically reviews and summarizes the existing literature of game acceptance, identifies the core determinants, and evaluates the strength of the relationships in the extended technology acceptance model. Moreover, this study segments video games into two categories: hedonic and utilitarian and examines player acceptance of these two types separately. Through a meta-analysis of 50 articles, we find that perceived ease of use (PEOU), perceived usefulness (PU), and perceived enjoyment (PE) significantly associate with attitude and behavioral intention. PE is the dominant predictor of hedonic game acceptance, while PEOU and PU are the main determinants of utilitarian game acceptance. Furthermore, we find that respondent type and game platform are significant moderators. Findings of this study provide critical insights into the phenomenon of game acceptance and suggest directions for future research.

  6. Physiologic correlates to background noise acceptance

    Science.gov (United States)

    Tampas, Joanna; Harkrider, Ashley; Nabelek, Anna

    2004-05-01

    Acceptance of background noise can be evaluated by having listeners indicate the highest background noise level (BNL) they are willing to accept while following the words of a story presented at their most comfortable listening level (MCL). The difference between the selected MCL and BNL is termed the acceptable noise level (ANL). One of the consistent findings in previous studies of ANL is large intersubject variability in acceptance of background noise. This variability is not related to age, gender, hearing sensitivity, personality, type of background noise, or speech perception in noise performance. The purpose of the current experiment was to determine if individual differences in physiological activity measured from the peripheral and central auditory systems of young female adults with normal hearing can account for the variability observed in ANL. Correlations between ANL and various physiological responses, including spontaneous, click-evoked, and distortion-product otoacoustic emissions, auditory brainstem and middle latency evoked potentials, and electroencephalography will be presented. Results may increase understanding of the regions of the auditory system that contribute to individual noise acceptance.

  7. Factors Influencing Acceptance Of Contraceptive Methods

    Directory of Open Access Journals (Sweden)

    Anita Gupta

    1997-04-01

    Full Text Available Research Problem: What are the factors influencing acceptance of contraceptive methods. Objective: To study the determinants influencing contra­ceptive acceptance. Study design: Population based cross - sectional study. Setting: Rural area of East Delhi. Participants: Married women in the reproductive age group. Sample:Stratified sampling technique was used to draw the sample. Sample Size: 328 married women of reproductive age group. Study Variables: Socio-economic status, Type of contraceptive, Family size, Male child. Outcome Variables: Acceptance of contraceptives Statistical Analysis: By proportions. Result: Prevalence of use of contraception at the time of data collection was 40.5%. Tubectomy and vasectomy were most commonly used methods. (59.4%, n - 133. Educational status of the women positively influenced the contraceptive acceptance but income did not. Desire for more children was single most important deterrent for accepting contraception. Recommendations: (i             Traditional method of contraception should be given more attention. (ii            Couplesshould be brought in the contraceptive use net at the early stage of marriage.

  8. WHOLEheart study participant acceptance of wholegrain foods.

    Science.gov (United States)

    Kuznesof, Sharron; Brownlee, Iain A; Moore, Carmel; Richardson, David P; Jebb, Susan A; Seal, Chris J

    2012-08-01

    This qualitative study explored the concept of acceptance of wholegrain foods in an adult population in the UK. Data was generated via focus groups with volunteers from a randomised controlled wholegrain based dietary intervention study (the WHOLEheart study). WHOLEheart volunteers, who did not habitually eat wholegrain foods, were randomised to one of three experimental regimes: (1) incorporating 60 g/day whole grains into the diet for 16 weeks; (2) incorporating 60 g/day whole grains into the diet for 8 weeks, doubling to 120 g/day for the following 8 weeks; (3) a control group. Focus groups to examine factors relating to whole grain acceptability were held one month post-intervention. For participants incorporating whole grains into their diet, acceptance was dependent upon: (a) 'trial acceptance', relating to the taste, preparation and perceived impact of the wholegrain foods on wellbeing, and (b) 'dietary acceptance' which involved the compatibility and substitutability of whole grains with existing ingredients and meal patterns. Barriers to sustained intake included family taste preferences, cooking skills, price and availability of wholegrain foods. Although LDL lowering benefits of eating whole grains provided the impetus for the WHOLEheart study, participants' self-reported benefits of eating wholegrain foods included perceived naturalness, high fibre content, superior taste, improved satiety and increased energy levels provided a stronger rationale for eating whole grains. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Residential proximinity, perceived and acceptable risk

    International Nuclear Information System (INIS)

    Rogers, G.O.

    1984-01-01

    This paper focuses on the relationship between the life experiences associated with residential proximity, and the perception and acceptability of the risks associated with generating electricity in nuclear power plants. Perceived risk is operationally defined in terms of estimated likelihood of occurrence, while acceptability of nuclear power is defined in terms of people's favorable or unfavorable opinions regarding nuclear power plants. In the context of a simple social-structural model of perceived and acceptable risk, four potential explanations for enhanced acceptability among those residentially proximate with nuclear facilities are examined: residents, through the experience of living with hazard, are reinforced toward assigning lower probabilities to the potential risks associated with nuclear facilities; the cognitive dissonance created by the acceptance of the risks associated with nuclear power is decreased by reducing perceived risk; nuclear neighbors are predisposed toward, educated about, and/or economically dependent upon nuclear power hence the more favorable attitudes toward it; nearby residents are systematically more altruistic--other oriented--than the general population and thus more willing to bear the risks associated with nuclear power

  10. Children acceptance of laser dental treatment

    Science.gov (United States)

    Lazea, Andreea; Todea, Carmen

    2016-03-01

    Objectives: To evaluate the dental anxiety level and the degree of acceptance of laser assisted pedodontic treatments from the children part. Also, we want to underline the advantages of laser use in pediatric dentistry, to make this technology widely used in treating dental problems of our children patients. Methods: Thirty pediatric dental patients presented in the Department of Pedodontics, University of Medicine and Pharmacy "Victor Babeş", Timişoara were evaluated using the Wong-Baker pain rating scale, wich was administered postoperatory to all patients, to assess their level of laser therapy acceptance. Results: Wong-Baker faces pain rating scale (WBFPS) has good validity and high specificity; generally it's easy for children to use, easy to compare and has good feasibility. Laser treatment has been accepted and tolerated by pediatric patients for its ability to reduce or eliminate pain. Around 70% of the total sample showed an excellent acceptance of laser dental treatment. Conclusions: Laser technology is useful and effective in many clinical situations encountered in pediatric dentistry and a good level of pacient acceptance is reported during all laser procedures on hard and soft tissues.

  11. Acceptance of Swedish e-health services

    Directory of Open Access Journals (Sweden)

    Mary-Louise Jung

    2010-11-01

    Full Text Available Mary-Louise Jung1, Karla Loria11Division of Industrial Marketing, e-Commerce and Logistics, Lulea University of Technology, SwedenObjective: To investigate older people’s acceptance of e-health services, in order to identify determinants of, and barriers to, their intention to use e-health.Method: Based on one of the best-established models of technology acceptance, Technology Acceptance Model (TAM, in-depth exploratory interviews with twelve individuals over 45 years of age and of varying backgrounds are conducted.Results: This investigation could find support for the importance of usefulness and perceived ease of use of the e-health service offered as the main determinants of people’s intention to use the service. Additional factors critical to the acceptance of e-health are identified, such as the importance of the compatibility of the services with citizens’ needs and trust in the service provider. Most interviewees expressed positive attitudes towards using e-health and find these services useful, convenient, and easy to use.Conclusion: E-health services are perceived as a good complement to traditional health care service delivery, even among older people. These people, however, need to become aware of the e-health alternatives that are offered to them and the benefits they provide.Keywords: health services, elderly, technology, Internet, TAM, patient acceptance, health-seeking behavior

  12. Electricity supply between acceptance, acceptability and social compatibility; Energieversorgung zwischen Akzeptanz, Akzeptabilitaet und Sozialvertraeglichkeit

    Energy Technology Data Exchange (ETDEWEB)

    Schubert, Katharina; Koch, Marco K. [Bochum Univ. (Germany). Lehrstuhl Energiesysteme und Energiewirtschaft (LEE)

    2012-11-01

    Acceptance promotion is supposed to be an indispensable premise for a successful realization of an energy concept. The contribution identifies deficiencies of the energy policy, including intransparency, complexity of decision procedures, for instance in case of the so called energy transmission line extension acceleration law, that has caused irritation and anger in the public. The justification of acceptance promotion is questioned in connection with the German nuclear policy reversal following the Fukushima accident. A research program ''public acceptance of large-scale power plants for electricity generation'' is presented. The issues criteria and limits of acceptability are of main importance for this discussion.

  13. In acceptance we trust? Conceptualising acceptance as a viable approach to NGO security management.

    Science.gov (United States)

    Fast, Larissa A; Freeman, C Faith; O'Neill, Michael; Rowley, Elizabeth

    2013-04-01

    This paper documents current understanding of acceptance as a security management approach and explores issues and challenges non-governmental organisations (NGOs) confront when implementing an acceptance approach to security management. It argues that the failure of organisations to systematise and clearly articulate acceptance as a distinct security management approach and a lack of organisational policies and procedures concerning acceptance hinder its efficacy as a security management approach. The paper identifies key and cross-cutting components of acceptance that are critical to its effective implementation in order to advance a comprehensive and systematic concept of acceptance. The key components of acceptance illustrate how organisational and staff functions affect positively or negatively an organisation's acceptance, and include: an organisation's principles and mission, communications, negotiation, programming, relationships and networks, stakeholder and context analysis, staffing, and image. The paper contends that acceptance is linked not only to good programming, but also to overall organisational management and structures. © 2013 The Author(s). Journal compilation © Overseas Development Institute, 2013.

  14. The European Utility Requirement Document

    International Nuclear Information System (INIS)

    Roche, I.I.

    1999-01-01

    The major European electricity producers work on a common requirement document for future LWR plants since 1992. They aim at requirements acceptable together by the owners, the public and the authorities. Thus the designers can develop standard LWR designs acceptable everywhere in Europe and the utilities can open their consultations to vendors on common bases. Such a standardisation promotes an improvement of generation costs and of safety : public and authorities acceptance should be improved as well ; significant savings are expected in development and construction costs. Since the early stages of the project, the EUR group has grown significantly. It now includes utilities from nine European countries. Utilities from two other European countries are joining the group. Specific cooperation agreements are also in progress with a few extra-European partners

  15. ENHANCING STAKEHOLDER ACCEPTANCE OF BIOREMEDIATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Focht, Will; Albright, Matt; Anex, Robert P., Jr., ed.

    2009-04-21

    control over exposure as low. Slightly more than half believe that risk reduction should be balanced against cost. We also found that distrust of DOE and its contractors exists, primarily due to the perception that site managers do not share public values; hence, the public is generally unwilling to defer to DOE in its decision-making. The concomitant belief of inefficacy confounds distrust by generating frustration that DOE does not care. Moreover, the public is split with respect to trust of each other, primarily because of the belief that citizens lack technical competence. With respect to bioremediation support, we found that more than 40% of the public has no opinion. However, of those who do, 3 of 4 are favorably disposed – particularly among those who believe that risk is lower and who are more trusting of site management. We presented survey respondents with four alternative participation strategies based on the results of the Q analysis and asked their judgments of each. The public prefers strategies that shifts power to them. The least empowered strategy (feedback) was supported by 46%; support grew as public power increased, reaching 66% support for independently facilitated deliberation. More DOE distrust generates more support for high power strategies. We offer the following recommendations to enhance public acceptance. First, and perhaps most importantly, site managers should pursue robust trust-building efforts to gain public confidence in DOE risk management that meets public expectations. Public trust decreases risk perception, which increases public willingness to defer to site managers’ discretion in decision-making, which in turn increases public acceptance of the decisions that result. Second, site managers should address public concerns about bioremediation such as its effectiveness in reducing risk, performance compared to other remediation alternatives, costs compared against benefits, time required to start and complete remediation, level of

  16. Enhancing Stakeholder Acceptance Of Bioremediation Technologies

    International Nuclear Information System (INIS)

    Focht, Will; Albright, Matt; Anex, Robert P. Jr.

    2009-01-01

    control over exposure as low. Slightly more than half believe that risk reduction should be balanced against cost. We also found that distrust of DOE and its contractors exists, primarily due to the perception that site managers do not share public values; hence, the public is generally unwilling to defer to DOE in its decision-making. The concomitant belief of inefficacy confounds distrust by generating frustration that DOE does not care. Moreover, the public is split with respect to trust of each other, primarily because of the belief that citizens lack technical competence. With respect to bioremediation support, we found that more than 40% of the public has no opinion. However, of those who do, 3 of 4 are favorably disposed - particularly among those who believe that risk is lower and who are more trusting of site management. We presented survey respondents with four alternative participation strategies based on the results of the Q analysis and asked their judgments of each. The public prefers strategies that shifts power to them. The least empowered strategy (feedback) was supported by 46%; support grew as public power increased, reaching 66% support for independently facilitated deliberation. More DOE distrust generates more support for high power strategies. We offer the following recommendations to enhance public acceptance. First, and perhaps most importantly, site managers should pursue robust trust-building efforts to gain public confidence in DOE risk management that meets public expectations. Public trust decreases risk perception, which increases public willingness to defer to site managers discretion in decision-making, which in turn increases public acceptance of the decisions that result. Second, site managers should address public concerns about bioremediation such as its effectiveness in reducing risk, performance compared to other remediation alternatives, costs compared against benefits, time required to start and complete remediation, level of risk

  17. MCO Engineering Test Report Fuel Basket Handling Grapple Acceptance Test

    International Nuclear Information System (INIS)

    CHENAULT, D.M.

    2000-01-01

    Acceptance testing of the production SNF Fuel Basket lift grapples to the required 150 percent maximum lift load is documented herein. The report shows the results affirming the proof test passage. The primary objective of this test was to confirm the load rating of the grapple per applicable requirements of ANSI 14 6 American National Standard For Radioactive Materials Special Lifting Devices for Shipping Containers Weighing 10,000 pounds (4500kg) or More. The above Standard requires a load test of 150% of the design load which must be held for a minimum of 10 minutes followed by a Liquid Penetrant or Magnetic Particle examination of critical areas and welds in accordance with the ANSI/ASME Boiler and Pressure Vessel Code 1989 Section 111 Division 1 section NF 5350

  18. Improving acceptance in wind power planning

    Energy Technology Data Exchange (ETDEWEB)

    Hammarlund, K. [Lund Univ. (Sweden). Dept. of Social and Economic Geography

    1996-12-01

    This paper presents important factors and planning procedures for public acceptance of wind power. Opinion surveys in Sweden show that acceptance is connected to the concept of utility rather than the aesthetic values. If wind turbines are confined by the authorities to marginal areas, they will not earn their rightful place in the landscape by being of use. A positive attitude in general promotes a positive experience of the effects of wind turbines. It is therefore essential to establish a sense of cooperation between the project management and the public. An open dialogue and continuous information will increase the possibilities for acceptance of future development. We must establish new codes of practice in permit processing because policies today contains ideological and practical contradictions between development and preservation of landscapes. 16 refs, 2 tabs

  19. Understanding Retailers’ Acceptance of Virtual Stores

    Directory of Open Access Journals (Sweden)

    Irene Y.L. Chen

    2010-09-01

    Full Text Available The acceptance of e-commerce among consumers has stimulated the rise of virtual stores. Increasing traditional retailers or people who do not have sufficient capital for maintaining a brick-and-mortar store have considered using virtual stores to reach global market. In the e-commerce literature, there has been rich research evidence concerning consumers’ acceptance of virtual stores. However, rigorous academic research on retailers’ acceptance of virtual stores is relatively scarce today. This study draws upon the theory of planned behavior and information richness theory to propose an integrated theoretical model. A field survey is used to collect data from e-tailers. The data are analyzed to examine the six relationships posited in the research model. Findings of this study provide a further research avenue for e-commerce, and implications for those who are managing or considering using virtual stores.

  20. Issues affecting the acceptance of hydrogen fuel

    International Nuclear Information System (INIS)

    Schulte, I.; Hart, D.; Vorst, R. van der

    2004-01-01

    While the topic of hydrogen as an alternative vehicle fuel is gaining increasing attention internationally, one significant aspect of its introduction has been given less attention than others: the public acceptance of such a new technology and fuel. After reviewing the existing literature on acceptance, risk perception and customer satisfaction, this paper describes the development of a model that illustrates important aspects in influencing a person's attitude towards a new product. 'Values', 'wants' and 'perception' are the three components found to influence acceptance, they themselves are affected by 'social background' and 'experience'. Suggestions are then given on how to use marketing methods, education projects and product exposure in order to maximise the likelihood of a successful introduction of hydrogen as an alternative fuel. (author)

  1. Working Toward Public Acceptance in Germany

    International Nuclear Information System (INIS)

    Peter Haug; Sabine Knapp

    1992-01-01

    West German utilities show a typical three level structure: local distributors, regional producers/distributors and some ten nationwide producers/distributors. Only the latter have the necessary financial and organizational means for running nuclear power stations. Public acceptance, on the other hand, does not care for state borders. Today, the leading German electronic media and the relevant print media are being distributed and received nationwide, transporting opinion as well as acceptance or non-acceptance. This paper describes the main projects of 'Nuclear Information Group' and the strategy considerations behind. Information centers at NPP sites can cover local information needs, regional utilities will cope with regional needs. It became obvious at the very beginning of the nuclear controversy, however, that it is also necessary to establish an additional, strictly federal, i. e. central, organisation that takes care of all nationwide information needs

  2. Improving acceptance in wind power planning

    International Nuclear Information System (INIS)

    Hammarlund, K.

    1996-01-01

    This paper presents important factors and planning procedures for public acceptance of wind power. Opinion surveys in Sweden show that acceptance is connected to the concept of utility rather than the aesthetic values. If wind turbines are confined by the authorities to marginal areas they will not earn their rightful place in the landscape by being of use. A positive attitude in general promotes positive experience of the effects of wind turbines. It is therefore essential to establish a sense of cooperation between the project management and the public. An open dialogue and continuous information will increase the possibilities for acceptance of future development. We must establish new codes of practice in permit processing because policies today contains idealogical and practical contradictions between the development and preservation of landscapes. (author)

  3. Scale and the acceptability of nuclear energy

    International Nuclear Information System (INIS)

    Wilbanks, T.J.

    1984-01-01

    A rather speculative exploration is presented of scale as it may affect the acceptability of nuclear energy. In our utilization of this energy option, how does large vs. small relate to attitudes toward it, and what can we learn from this about technology choices in the United States more generally. In order to address such a question, several stepping-stones are needed. First, scale is defined for the purposes of the paper. Second, recent experience with nuclear energy is reviewed: trends in the scale of use, the current status of nuclear energy as an option, and the social context for its acceptance problems. Third, conventional notions about the importance of scale in electricity generation are summarized. With these preliminaries out of the way, the paper then discusses apparent relationships between scale and the acceptance of nuclear energy and suggests some policy implications of these preliminary findings. Finally, some comments are offered about general relationships between scale and technology choice

  4. FFTBM and primary pressure acceptance criterion

    International Nuclear Information System (INIS)

    Prosek, A.

    2004-01-01

    When thermalhydraulic computer codes are used for simulation in the area of nuclear engineering the question is how to conduct an objective comparison between the code calculation and measured data. To answer this the fast Fourier transform based method (FFTBM) was developed. When the FFTBM method was developed the acceptance criteria for primary pressure and total accuracy were set. In the recent study the FFTBM method was used for accuracy quantification of RD-14M large LOCA test B9401 calculations. The blind accuracy analysis indicated good total accuracy while the primary pressure criterion was not fulfilled. The objective of the study was therefore to investigate the reasons for not fulfilling the primary pressure acceptance criterion and the applicability of the criterion to experimental facilities simulating heavy water reactor. The results of the open quantitative analysis showed that sensitivity analysis for influence parameters provide sufficient information to judge in which calculation the accuracy of primary pressure is acceptable. (author)

  5. Consumer Acceptance of a Polyphenolic Coffee Beverage.

    Science.gov (United States)

    Nguyen, Thuy; Kuchera, Meredith; Smoot, Katie; Diako, Charles; Vixie, Beata; Ross, Carolyn F

    2016-10-05

    The objective of this study was to determine if Chardonnay grape seed pomace (GSP), a waste stream of wine production, could be used as a functional ingredient in brewed coffee. Two consumer panels were conducted to assess the acceptance of coffee at coffee replacement (w/w) values of 0% (control), 6.25%, 12.50%, 18.75%, or 25% GSP. The 1st consumer panel (n = 80) assessed the coffee samples served "black." The 2nd panel (n = 67) assessed the coffee samples with adjustment (that is, sweeteners, milk, and cream) options available. Consumer sensory evaluation involved evaluating the 5 treatments individually for acceptance of appearance, aroma, taste/flavor, and overall acceptance using a 9-point hedonic scale. A check-all-that-apply questionnaire surveyed the sensory attributes describing aroma, appearance, and taste/flavor of the samples. Oxygen radical absorbance capacity was used to measure the effects of antioxidant levels in GSP coffee samples. Results showed that GSP could be added at 6.25% replacement without significantly affecting the overall consumer acceptance of coffee compared to the control (0% GSP). Above 6.25% GSP supplementation, the coffee beverage was described as more tan, milky, watery/dilute, and mild, and was generally less accepted by the consumers. GSP also increased the antioxidant capacity of the coffee compared to the control (0% GSP), with no significant differences among replacement values. Therefore, 6.25% GSP replacement is recommended for creating coffee beverages acceptable to consumers. Further in vivo investigation may substantiate the free-radical scavenging capacity of GSP coffee and its potential health benefits. © 2016 Institute of Food Technologists®.

  6. Development of technology and public acceptance

    International Nuclear Information System (INIS)

    Shibata, Shun-ichi

    1984-01-01

    The author, as a professor, has many years' experience in the design, construction and operation of a research reactor and a critical assembly. The author has also ample experience in the conversation and discussion on the safety of nuclear facilities with concerned public. The effective ways of gaining public acceptance are discussed based on many examples. These examples show that understanding and confidence are the keys to gaining public acceptance. Showing the facilities and experimental works to the public or the fact that the residence of the personnel and their family are located very near the reactor are much more effective than any argument for improving public understanding and confidence. (Aoki, K.)

  7. THE ENVIRONMENTAL TECHNOLOGIES ACCEPTANCE (ETA) PROGRAM

    International Nuclear Information System (INIS)

    Behr-Andres, Christina B.

    2001-01-01

    The Environmental Technologies Acceptance (ETA) Program at the Energy and Environmental Research Center (EERC) is intended to advance the development, commercial acceptance, and timely deployment of selected private sector technologies for the cleanup of sites in the nuclear defense complex as well as the greater market. As shown in Table 1, this cooperative agreement funded by the National Energy Technology Laboratory (NETL) consists of three tasks: Technology Selection, Technology Development, and Technology Verification. As currently conceived, the ETA will address the needs of as many technologies as appropriate under its current 3-year term. This report covers activities during the first 6 months of the 3-year ETA program

  8. RISK ANALYSES USED IN ACCEPTANCE TESTING

    Directory of Open Access Journals (Sweden)

    Oxana STOROJ

    2016-06-01

    Full Text Available This article is talking about risk based testing approach in user acceptance testing UAT (User Acceptance Testing. There are presented definitions of risk and risk based testing. In addition, we are talking about risks that can appear during UAT and we are describing the process of testing based on risks. We propose some techniques and methods of identifying risks such as using Brainstorming, Delphi method,probability analysis method and others. Also, risk traceability matrix is presented as a method of prioritizing risks.

  9. [Could infant euthanasia be ever acceptable?].

    Science.gov (United States)

    Beca, J P; Leiva, A

    2014-10-01

    The recent enactment of a law that allows infant euthanasia in Belgium raises questions with varied answers. To contribute to a better understanding of the topic, euthanasia and legislation concepts are described. After a bioethical analysis, we propose as conclusion that children euthanasia could only be acceptable in very exceptional situations in which palliative measures have failed. The answer should be that it is not acceptable in our setting, not until we have public policies, protocols and palliative care services for terminally ill children.

  10. Waste acceptance criteria for the Waste Isolation Pilot Plant

    International Nuclear Information System (INIS)

    1996-04-01

    The Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC), DOE/WIPP-069, was initially developed by a U.S. Department of Energy (DOE) Steering Committee to provide performance requirements to ensure public health and safety as well as the safe handling of transuranic (TRU) waste at the WIPP. This revision updates the criteria and requirements of previous revisions and deletes those which were applicable only to the test phase. The criteria and requirements in this document must be met by participating DOE TRU Waste Generator/Storage Sites (Sites) prior to shipping contact-handled (CH) and remote-handled (RH) TRU waste forms to the WIPP. The WIPP Project will comply with applicable federal and state regulations and requirements, including those in Titles 10, 40, and 49 of the Code of Federal Regulations (CFR). The WAC, DOE/WIPP-069, serves as the primary directive for assuring the safe handling, transportation, and disposal of TRU wastes in the WIPP and for the certification of these wastes. The WAC identifies strict requirements that must be met by participating Sites before these TRU wastes may be shipped for disposal in the WIPP facility. These criteria and requirements will be reviewed and revised as appropriate, based on new technical or regulatory requirements. The WAC is a controlled document. Revised/changed pages will be supplied to all holders of controlled copies

  11. Acceptance test report for portable exhauster POR-008/Skid F

    International Nuclear Information System (INIS)

    Kriskovich, J.R.

    1998-01-01

    Portable Exhauster POR-008 was procured via HNF-0490, Specification for a Portable Exhausted System for Waste Tank Ventilation. Prior to taking ownership, acceptance testing was performed at the vendors. However at the conclusion of testing a number of issues remained that required resolution before the exhausters could be used by Project W-320. The purpose of acceptance testing documented by this report was to demonstrate compliance of the exhausters with the performance criteria established within HNF-O49O, Rev. 1 following a repair and upgrade effort at Hanford. In addition, data obtained during this testing is required for the resolution of outstanding Non-conformance Reports (NCR), and finally, to demonstrate the functionality of the associated software for the pressure control and high vacuum exhauster operating modes provided for by W-320. Additional testing not required by the ATP was also performed to assist in the disposition and close out of receiving inspection report and for application design information (system curve). Results of this testing are also captured within this document

  12. Explosive component acceptance tester using laser interferometer technology

    Science.gov (United States)

    Wickstrom, Richard D.; Tarbell, William W.

    1993-01-01

    Acceptance testing of explosive components requires a reliable and simple to use testing method that can discern less than optimal performance. For hot-wire detonators, traditional techniques use dent blocks or photographic diagnostic methods. More complicated approaches are avoided because of their inherent problems with setup and maintenance. A recently developed tester is based on using a laser interferometer to measure the velocity of flying plates accelerated by explosively actuated detonators. Unlike ordinary interferometers that monitor displacement of the test article, this device measures velocity directly and is commonly used with non-spectral surfaces. Most often referred to as the VISAR technique (Velocity Interferometer System for Any Reflecting Surface), it has become the most widely-accepted choice for accurate measurement of velocity in the range greater than 1 mm/micro-s. Traditional VISAR devices require extensive setup and adjustment and therefore are unacceptable in a production-testing environment. This paper describes a new VISAR approach which requires virtually no adjustments, yet provides data with accuracy comparable to the more complicated systems. The device, termed the Fixed-Cavity VISAR, is currently being developed to serve as a product verification tool for hot-wire detonators and slappers. An extensive data acquisition and analysis computer code was also created to automate the manipulation of raw data into final results.

  13. 14 CFR 171.159 - Installation requirements.

    Science.gov (United States)

    2010-01-01

    ... Installation requirements. (a) The facility must be installed according to accepted good engineering practices... must have a reliable source of suitable primary power, either from a power distribution system or...

  14. 7 CFR 1806.3 - Coverage requirements.

    Science.gov (United States)

    2010-01-01

    ... value) all essential buildings. Essential buildings include the dwelling and any other buildings that... requirements is not available in a hurricane area, the County Supervisor may accept from the borrower or...

  15. Waste acceptance product specifications for vitrified high-level waste forms

    International Nuclear Information System (INIS)

    Applewhite-Ramsey, A.; Sproull, J.F.

    1993-01-01

    The Nuclear Waste Policy Act of 1982 mandated that all high-level waste (HLW) be sent to a federal geologic repository for permanent disposal. DOE published the Environmental Assessment in 1982 which identified borosilicate glass as the chosen HLW form. 1 In 1985 the Department of Energy instituted a Waste Acceptance Process to assure that DWPF glass waste forms would be acceptable to such a repository. This assurance was important since production of waste forms will precede repository construction and licensing. As part of this Waste Acceptance Process, the DOE Office of Civilian Radioactive Waste Management (RW) formed the Waste Acceptance Committee (WAC). The WAC included representatives from the candidate repository sites, the waste producing sites and DOE. The WAC was responsible for developing the Waste Acceptance Preliminary Specifications (WAPS) which defined the requirements the waste forms must meet to be compatible with the candidate repository geologies

  16. Regulatory process and effects on public acceptance

    International Nuclear Information System (INIS)

    Zangger, C.

    1977-01-01

    In Switzerland four Federal laws are involved in controlling nuclear energy. Two of them are applied on the Federal level and entail a single Federal licensing procedure (peaceful uses of atomic energy; protection of nature and landscape). The other two laws are applied on the cantonal level and entail two different cantonal licensing procedures (protection of waters; industry, crafts and trade). Even though these four laws together cover all aspects of the protection of man, the environment and the countryside, nevertheless: - the legal situation and the overall licensing system are complex; they are unintelligible to the man in the street and offer a lawyer numerous possibilities for bringing in appeals; - decisions affecting the three licensing procedures are taken at different levels; and - the nuclear law contains a clause obliging the Federal authorities to treat information on the nuclear aspects of projects confidentially. Although this state of affairs has not appreciably influenced acceptance by the population living near the two operating power plants and the two that are under construction, it has led, in the case of two of the five new projects, to consistently mounting opposition on the part of the local population, opposition which in some cases has reached a very high pitch. In 1975, there was one case where the site was occupied for several months, a violation of the law. Similarly, the opposition which was latent in the rest of Switzerland until two years ago has reached the stage of initiatives: petitions on nuclear energy have been filed in some cantons, and a ''Federal popular initiative to safeguard the people's rights and safety during the construction and operation of atomic facilities'' has been launched. Since the four laws covering nuclear power plants were adopted on the Federal level, it would seem that the cantonal initiatives lack a legal basis. On the other hand the Federal initiative, which demands in particular that powers of

  17. Acceptance and storage of fresh cheese made with essential oils

    Directory of Open Access Journals (Sweden)

    Joelmir Grassi Presente

    2017-08-01

    Full Text Available The aim of this work was to evaluate the acceptance and conservation of Minas fresh cheese with essential oils added of oregano and ginger in its formulation. The quality of the milk used as raw material was evaluated for pH, acidity, alizarol, total solids, density, and total microbial load. The cheeses produced were characterized as pH, acidity, moisture, lipids, proteins and ashes. The cheeses were also evaluated by sensorial affective tests using hedonic and attitude scales, in order to determine the acceptance and purchase intention by judges. The count of total aerobic mesophilic microorganisms was used to estimate the shelf-life of cheeses. The milk used as raw material is presented within the quality standards required by legislation. The cheeses made with essential oils showed pH and acidity around 6.9 and 0.87%, respectively, 57.6% moisture, 31.3% lipids, 11.4% protein and 0.9% ash. The cheese added essential oil of oregano and the control cheese were those given by the judges the best values for acceptance (7.5 and 7.6, respectively and purchase intention (4.2 and 4.4 respectively. Regarding the estimated shelf-life, the cheeses added essential oil of oregano and ginger had lower overall microbial load values compared to the control (no oil and mixed (two oils addition, presented counts values with up 106 UFC/g only from the 28th day of storage.

  18. Global Distribution of Net Electron Acceptance in Subseafloor Sediment

    Science.gov (United States)

    Fulfer, V. M.; Pockalny, R. A.; D'Hondt, S.

    2017-12-01

    We quantified the global distribution of net electron acceptance rates (e-/m2/year) in subseafloor sediment (>1.5 meters below seafloor [mbsf]) using (i) a modified version of the chemical-reaction-rate algorithm by Wang et al. (2008), (ii) physical properties and dissolved oxygen and sulfate data from interstitial waters of sediment cores collected by the Ocean Drilling Program, Integrated Ocean Drilling Program, International Ocean Discovery Program, and U.S. coring expeditions, and (iii) correlation of net electron acceptance rates to global oceanographic properties. Calculated net rates vary from 4.8 x 1019 e-/m2/year for slowly accumulating abyssal clay to 1.2 x 1023 e-/m2/year for regions of high sedimentation rate. Net electron acceptance rate correlates strongly with mean sedimentation rate. Where sedimentation rate is very low (e.g., 1 m/Myr), dissolved oxygen penetrates more than 70 mbsf and is the primary terminal electron acceptor. Where sedimentation rate is moderate (e.g., 3 to 60 m/Myr), dissolved sulfate penetrates as far as 700 mbsf and is the principal terminal electron acceptor. Where sedimentation rate is high (e.g., > 60 m/Myr), dissolved sulfate penetrates only meters, but is the principal terminal electron acceptor in subseafloor sediment to the depth of sulfate penetration. Because microbial metabolism continues at greater depths than the depth of sulfate penetration in fast-accumulating sediment, complete quantification of subseafloor metabolic rates will require consideration of other chemical species.

  19. Societal acceptance of carbon capture and storage technologies

    International Nuclear Information System (INIS)

    Alphen, Klaas van; Voorst tot Voorst, Quirine van; Hekkert, Marko P.; Smits, Ruud E.H.M.

    2007-01-01

    For the actual implementation of carbon capture and storage (CCS) technologies, societal support is a crucial precondition. This paper describes an extensive study on the acceptance of CCS by stakeholders in the Netherlands and explores one of the determining factors in the acceptance of CCS by the lay public, i.e. the way the Dutch press perceives and portrays CCS. The stakeholder analysis shows that there is a positive attitude towards CCS by industry, government, and environmental NGOs, provided that the conditions they pose on the deployment of CCS are met. The content analysis of Dutch news articles conveys that the media portrayal of CCS is-to a certain extent-a balanced reflection of the way CCS is perceived by the stakeholders. Both analyses show that the concerns about CCS have not overshadowed the main promise that CCS is part of the solution to climate change. However, the current negative aspects of CCS as raised by different stakeholders and the media will remain if no action is taken. Therefore, the conditions posed on the use of CCS, as well as the actions required to meet these conditions, could function as a proxy for the 'societal voice', articulating the most important issues concerning the future acceptance of CCS technology

  20. Role of community acceptance in sustainable bioenergy projects in India

    International Nuclear Information System (INIS)

    Eswarlal, Vimal Kumar; Vasudevan, Geoffrey; Dey, Prasanta Kumar; Vasudevan, Padma

    2014-01-01

    Community acceptance has been identified as one of the key requirements for a sustainable bioenergy project. However less attention has been paid to this aspect from developing nations and small projects perspective. Therefore this research examines the role of community acceptance for sustainable small scale bioenergy projects in India. While addressing the aim, this work identifies influence of community over bioenergy projects, major concerns of communities regarding bioenergy projects and factors influencing perceptions of communities about bioenergy projects. The empirical research was carried out on four bioenergy companies in India as case studies. It has been identified that communities have significant influence over bioenergy projects in India. Local air pollution, inappropriate storage of by-products and credibility of developer are identified as some of the important concerns. Local energy needs, benefits to community from bioenergy companies, level of trust on company and relationship between company and the community are some of the prime factors which influence community's perception on bioenergy projects. This research sheds light on important aspects related to community acceptance of bioenergy projects, and this information would help practitioners in understanding the community perceptions and take appropriate actions to satisfy them

  1. Acceptance criteria for the low enriched uranium reform amendments

    International Nuclear Information System (INIS)

    Emeigh, C.W.; Gundersen, G.E.; Withee, C.J.

    1984-05-01

    Revisions have been made to the material control and accounting requirements for NRC licensees authorized to possess and use more than one effective kilogram of special nuclear material of low strategic significance to have material control and accounting systems able to (1) confirm the presence of special nuclear material, (2) resolve indications of missing material, and (3) aid in the investigation and recovery of missing material. This document presents criteria that can be used to aid in judging the acceptability of licensee plans that would be submitted to the NRC for implementing these capabilities. General performance objectives, system capabilities, and recordkeeping are addressed

  2. HWVP compliance with the Hanford site solid waste acceptance criteria

    International Nuclear Information System (INIS)

    Bromm, R.; Ornelas, J.; Fundingsland, S.; Shah, K.

    1993-01-01

    In order to ensure that the Hanford Waste Vitrification Project (HWVP) will meet solid waste acceptance criteria, a review of the criteria was performed. The primary purpose of the study was to evaluate the modifications that will be required to bring the HWVP into compliance for secondary waste which will be generated during normal operations of the facility. To accomplish this objective, the current HWVP design was evaluated based on the criteria established. Once the non-compliance areas and potentially non-compliance areas were identified, alternative plant design modifications were proposed. This paper summarizes the results and recommendations of that study

  3. Monitoring device acceptance in implantable cardioverter defibrillator patients using the Florida Patient Acceptance Survey

    DEFF Research Database (Denmark)

    Versteeg, Henneke; Starrenburg, Annemieke; Denollet, Johan

    2012-01-01

    Patient device acceptance might be essential in identifying patients at risk for adverse patient-reported outcomes following implantation of an implantable cardioverter defibrillator (ICD). We examined the validity and reliability of the Florida Patient Acceptance Scale (FPAS) and identified corr...

  4. Measuring Technology Acceptance Level of Turkish Pre-Service English Teachers by Using Technology Acceptance Model

    Science.gov (United States)

    Kirmizi, Özkan

    2014-01-01

    The aim of this study is to investigate technology acceptance of prospective English teachers by using Technology Acceptance Model (TAM) in Turkish context. The study is based on Structural Equation Model (SEM). The participants of the study from English Language Teaching Departments of Hacettepe, Gazi and Baskent Universities. The participants…

  5. Investigating Students' Acceptance of a Statistics Learning Platform Using Technology Acceptance Model

    Science.gov (United States)

    Song, Yanjie; Kong, Siu-Cheung

    2017-01-01

    The study aims at investigating university students' acceptance of a statistics learning platform to support the learning of statistics in a blended learning context. Three kinds of digital resources, which are simulations, online videos, and online quizzes, were provided on the platform. Premised on the technology acceptance model, we adopted a…

  6. Specification and acceptance testing of radiotherapy treatment planning systems

    International Nuclear Information System (INIS)

    2007-04-01

    Quality assurance (QA) in the radiation therapy treatment planning process is essential to ensure accurate dose delivery to the patient and to minimize the possibility of accidental exposure. The computerized radiotherapy treatment planning systems (RTPSs) are now widely available in industrialized and developing countries and it is of special importance to support hospitals in Member States in developing procedures for acceptance testing, commissioning and QA of their RTPSs. Responding to these needs, a group of experts developed an IAEA publication with such recommendations, which was published in 2004 as IAEA Technical Reports Series No. 430. This report provides a general framework and describes a large number of tests and procedures that should be considered by the users of new RTPSs. However, small hospitals with limited resources or large hospitals with high patient load and limited staff are not always able to perform complete characterization, validation and software testing of algorithms used in RTPSs. Therefore, the IAEA proposed more specific guidelines that provide a step-by-step recommendation for users at hospitals or cancer centres how to implement acceptance and commissioning procedures for newly purchased RTPSs. The current publication was developed in the framework of the Coordinated Research Project on Development of Procedures for Quality Assurance for Dosimetry Calculations in Radiotherapy and uses the International Electrotechnical Commission (IEC) standard IEC 62083, Requirements for the Safety of Radiotherapy Treatment Planning Systems as its basis. The report addresses the procedures for specification and acceptance testing of RTPSs to be used by both manufacturers and users at the hospitals. Recommendations are provided for specific tests to be performed at the manufacturing facility known as type tests, and for acceptance tests to be performed at the hospital known as site tests. The purpose of acceptance testing is to demonstrate to the

  7. Software requirements

    CERN Document Server

    Wiegers, Karl E

    2003-01-01

    Without formal, verifiable software requirements-and an effective system for managing them-the programs that developers think they've agreed to build often will not be the same products their customers are expecting. In SOFTWARE REQUIREMENTS, Second Edition, requirements engineering authority Karl Wiegers amplifies the best practices presented in his original award-winning text?now a mainstay for anyone participating in the software development process. In this book, you'll discover effective techniques for managing the requirements engineering process all the way through the development cy

  8. Acceptance of Swedish e-health services

    Science.gov (United States)

    Jung, Mary-Louise; Loria, Karla

    2010-01-01

    Objective: To investigate older people’s acceptance of e-health services, in order to identify determinants of, and barriers to, their intention to use e-health. Method: Based on one of the best-established models of technology acceptance, Technology Acceptance Model (TAM), in-depth exploratory interviews with twelve individuals over 45 years of age and of varying backgrounds are conducted. Results: This investigation could find support for the importance of usefulness and perceived ease of use of the e-health service offered as the main determinants of people’s intention to use the service. Additional factors critical to the acceptance of e-health are identified, such as the importance of the compatibility of the services with citizens’ needs and trust in the service provider. Most interviewees expressed positive attitudes towards using e-health and find these services useful, convenient, and easy to use. Conclusion: E-health services are perceived as a good complement to traditional health care service delivery, even among older people. These people, however, need to become aware of the e-health alternatives that are offered to them and the benefits they provide. PMID:21289860

  9. Educational Data Mining Acceptance among Undergraduate Students

    Science.gov (United States)

    Wook, Muslihah; Yusof, Zawiyah M.; Nazri, Mohd Zakree Ahmad

    2017-01-01

    The acceptance of Educational Data Mining (EDM) technology is on the rise due to, its ability to extract new knowledge from large amounts of students' data. This knowledge is important for educational stakeholders, such as policy makers, educators, and students themselves to enhance efficiency and achievements. However, previous studies on EDM…

  10. 12 CFR 250.164 - Bankers' acceptances.

    Science.gov (United States)

    2010-01-01

    .... The legislative history of the BESA indicates no intent to change this domestic acceptance limitation... financial statements prepared in accordance with local accounting practices and an explanation of the accounting terminology and the major features of the accounting standards used in the preparation of the...

  11. Acceptance criteria for radioactive waste deposition

    International Nuclear Information System (INIS)

    Rzyski, B.M.

    1989-01-01

    The disposal of low-and intermediate level radioactive waste in either shallow ground or rock cavities must be subjected to special guidelines which are used by national authorities and implementing bodies when establishing and regulating respositories. These informations are given by the acceptance criteria and will depend on specific site conditions and optmized procedures. (author) [pt

  12. Shoulder dystocia--malpractice or acceptable risk?

    Science.gov (United States)

    Skolbekken, J A

    2000-09-01

    In 1988 a new patient insurance system was introduced in Norway. It was initially described as an 'objectified' system, similar to one based on the no-fault principle. Early doubts were raised about the system's status, as it contains rules stating that compensation will not be given if the medical intervention is adequate and the involved risk is acceptable. This study was undertaken to examine the practice of these rules. An archival study was performed on the 41 shoulder dystocia cases that had been closed in the decade from 1988-1997. These cases were selected as shoulder dystocia was found to be the obstetrical event most often leading to a decision on acceptable risk. The most common injury in these cases was Erb's palsy, but fatalities and brain injuries were also observed. Compensation was given in nine cases, whereas it was denied due to an acceptable medical risk in the remaining cases. Indications of inconsistency among the reached decisions were found, and judged to be a result of differences of opinion between expert witnesses on the adequacy of the obstetrical practice. Doubts are raised as to whether similar decisions are reached in similar cases. Shoulder dystocia may be an acceptable risk in the sense that it is hard to predict and prevent. Whether the consequences of such a risk should be compensated, remains a political and economical issue. Present thinking leads to decisions that create a divide between the lucky unlucky and the plainly unlucky.

  13. Patients’ acceptance of corticotomy-assisted orthodontics

    Science.gov (United States)

    Zawawi, Khalid H

    2015-01-01

    Objective To study patients’ acceptance of corticotomy-assisted orthodontics as a treatment option. Methods Adult patients seeking orthodontic treatment were asked to complete two sets of questionnaires; the first set included questions about age, sex, and level of education and general questions about orthodontic treatment; and the second set was related to the corticotomy-assisted orthodontics. Before answering the corticotomy questions, a brief description of the clinical procedure was explained and photographs of an actual procedure were shown. Results A total of 150 subjects were approached and 129 (86%) agreed to answer the questionnaires (72 male and 57 female patients). Of these, only 3.1% did hear about corticotomy and 7.8% selected corticotomy instead of extraction. Fear from the surgery (53.2%) was the most frequent reason for not selecting corticotomy followed by fear from pain (36.9%). The acceptance of corticotomy between males and females was similar. No relationship was found between the level of education and prior knowledge of the procedure, P=0.857. Prior knowledge about corticotomy was not a factor in selecting it as a treatment option (P=0.556) to reduce the treatment time (P=0.427). Conclusion The acceptance of corticotomy-assisted orthodontics as a treatment option was low. Fear from the surgery was the main reason for not selecting it. The acceptance of corticotomy-assisted orthodontics was not related to patient’s level of education or sex. PMID:26316719

  14. International Emissions Trading : Design and Political Acceptability

    NARCIS (Netherlands)

    Boom, Jan Tjeerd

    2006-01-01

    This thesis discusses the design and political acceptability of international emissions trading. It is shown that there are several designs options for emissions trading at the national level that have a different impact on output and thereby related factors such as employment and consumer prices.

  15. Why are energy policies acceptable and effective?

    NARCIS (Netherlands)

    Steg, L.; Dreijerink, L; Abrahamse, W.

    This article examines which policy features affect the perceived effectiveness and acceptability of pricing policies aimed to reduce CO2 emissions. A survey study was conducted among 112 Dutch respondents in 2003. As hypothesized, incentives and policies targeting efficiency behavior were perceived

  16. Is Coersive Treatment of Offenders Morally Acceptable?

    DEFF Research Database (Denmark)

    Ryberg, Jesper

    2015-01-01

    Is it morally acceptable to instigate criminal offenders to participate in rehabilitative treatment by offering treatment in return for early release from prison? Some theorists have supported such treatment schemes by pointing to the beneficial consequences that follow from the treatment. Others...

  17. Acceptance of sugar reduction in flavored yogurt.

    Science.gov (United States)

    Chollet, M; Gille, D; Schmid, A; Walther, B; Piccinali, P

    2013-09-01

    To investigate what level of sugar reduction is accepted in flavored yogurt, we conducted a hedonic test focusing on the degree of liking of the products and on optimal sweetness and aroma levels. For both flavorings (strawberry and coffee), consumers preferred yogurt containing 10% added sugar. However, yogurt containing 7% added sugar was also acceptable. On the just-about-right scale, yogurt containing 10% sugar was more often described as too sweet compared with yogurt containing 7% sugar. On the other hand, the sweetness and aroma intensity for yogurt containing 5% sugar was judged as too low. A second test was conducted to determine the effect of flavoring concentration on the acceptance of yogurt containing 7% sugar. Yogurts containing the highest concentrations of flavoring (11% strawberry, 0.75% coffee) were less appreciated. Additionally, the largest percentage of consumers perceived these yogurts as "not sweet enough." These results indicate that consumers would accept flavored yogurts with 7% added sugar instead of 10%, but 5% sugar would be too low. Additionally, an increase in flavor concentration is undesirable for yogurt containing 7% added sugar. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  18. attitudes and acceptance of nigerians towards vasectomy

    African Journals Online (AJOL)

    2013-03-01

    Mar 1, 2013 ... factor influencing the acceptance of vasectomy (p= 0.013) with stronger correlation among men than ... is the most populated nation in Africa, accounting for over two thirds of ... was reported as the contraceptive of choice in one third of all ... reported to be a major contraceptive method in more developed ...

  19. Photonuclear experiments using large acceptance detectors

    International Nuclear Information System (INIS)

    Mecking, B.A.

    1984-08-01

    Experimental programs in photonuclear physics are discussed. In experiments concentrate on the combined use of low intensity (real and virtual) photon beams and large acceptance detectors for the detection of multiple particle final states. Count rate estimates and the consequences for the operation of a high intensity accelerator are given. (orig.)

  20. Acceptance test report: Backup power system

    International Nuclear Information System (INIS)

    Cole, D.B.

    1996-01-01

    Acceptance Test Report for construction functional testing of Project W-030 Backup Power System. Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks. Backup power includes a single 125 KW diesel generator, three 10-kva uninterruptible power supply units, and all necessary control

  1. School Choice Acceptance: An Exploratory Explication

    Science.gov (United States)

    Koven, Steven G.; Khan, Mobin

    2014-01-01

    School choice is presented by some as a panacea to the challenges facing education in the United States. Acceptance of choice as a solution, however, is far from universal. This article examines two possible contributors to choice adoption: ideology and political culture. Political culture was found to better explain the complex phenomenon of…

  2. Acceptance of homosexuality in the Netherlands 2011

    NARCIS (Netherlands)

    Saskia Keuzenkamp

    2011-01-01

    The Dutch government wishes to promote the social acceptance of homosexuality. To gain an impression of the current status and the progress in achieving this objective, the government asked the Netherlands Institute for Social Research/SCP to carry out a study of the current statistics and

  3. proximate composition and consumer acceptability of african

    African Journals Online (AJOL)

    DR. AMINU

    2012-12-02

    Dec 2, 2012 ... Smoking of the fishes was carried out for 4 hours using traditional ... an intention of making the fish safer and extend its shelf-life (Ghazala, 1994). Acceptability of smoke-dried products ... characteristics of the wood and how they affect the ... major ethnic group in the area and Islam is the dominant religion.

  4. European consumers' acceptance of functional foods

    DEFF Research Database (Denmark)

    Grunert, Klaus G.

    2010-01-01

    the consumer perspective, synergies between healthiness and convenience, but may, in the consumer mind, lead to trade-offs between healthiness on the one side and taste and naturalness on the other side. This may explain the reluctance of European consumers to accept functional food products....

  5. Examining Information Technology Acceptance by Individual Professionals

    Directory of Open Access Journals (Sweden)

    Licen Indahwati Darsono

    2005-06-01

    Full Text Available The mixed results of information technology (IT investment have made the investigation of user acceptance of IT increasingly challenging. A growing body of research in user acceptance of IT literature has limited focus on individual professionals as target users. Therefore, this research investigates how external variables, namely individual differences and system characteristics influence lecturers as individual professionals to accept the internet technology. Technology Acceptance Model (TAM and Theory of Planned Behavior (TPB are used as the main reference in this research. Findings of this research indicate that individual differences (computer self-efficacy, knowledge of search domain and system characteristics (terminology, screen design, relevance have indirect impact through perceived ease of use, perceived usefulness, and attitude on lecturers’ intention to use the internet. Specifically, computer self-efficacy and screen design have direct and indirect impact on intention. One issue concerning with the explanatory power of the proposed research model, which is based on TAM and TPB, compared to the rival model, which is called extended TAM, is also analyzed.

  6. Neighbourhood Acceptability of Poultry Farms Located in ...

    African Journals Online (AJOL)

    ... due to poultry production in their neighbourhood. It was recommended that farmers should be encouraged to adopt technologies that can keep poultry litters dry and odourless. In addition, poultry farm locations should be sited far away from residential areas. Keywords: Poultry Farms, Acceptability, Waste management, ...

  7. The Acceptability of Speech with Radio Interference

    DEFF Research Database (Denmark)

    Baykaner, K.; Hummersone, H.; Mason, R.

    2014-01-01

    A listening test was conducted to investigate the acceptability of audio-on-audio interference for radio programs featuring speech as the target. Twenty-one subjects, including naïve and expert listeners, were presented with 200 randomly assigned pairs of stimuli and asked to report, for each trial...

  8. Acceptance of irradiated food: an education issue

    International Nuclear Information System (INIS)

    Modanez, Leila

    2012-01-01

    The commercial use of irradiated food technology in Brazil has a slow growing due to misinterpretation by most Brazilian consumers, who have been mislead by wrong ideas about the meaning of what is nuclear energy. Researches indicate that consumers have difficult in accepting such a technology due to the confusion between the terms irradiation and radioactivity, which are often related to health risks. When properly informed about the process, its purpose and the benefits offered by food irradiation technology, most consumers react positively. Therefore, this work aims to: first, to evaluate the acceptance of irradiated foods by Brazilian consumers; second, to verify the teaching at school about the food irradiation process; third, to analyze the Brazilian school curriculum from elementary school to high school, regarding nuclear energy applications; then, to compare the content taught in Brazil with the content covered in other surveyed countries, such as France, United States, and China. The methodology of this study consisted of a systematic survey of the specific literature, and a questionnaire to verify the acceptance of irradiated food by Brazilian consumers. According to the researched bibliography, it was clear the recommendation of an early school education about the usage of nuclear energy, more specifically, food irradiation. Such a recommendation is due to the fact that the consulted costumers, in Brazil and other countries mentioned in this work, do not clearly understand the full benefits of irradiated food. Hence, education is fundamental for the acceptance of new technologies by consumers, as it is the case with irradiated food. (author)

  9. Plans for modeling rational acceptance of technology

    NARCIS (Netherlands)

    Houkes, W.N.; Pols, A.J.K.; Michelfelder, D.P.; McCarthy, N.; Goldberg, D.E.

    2013-01-01

    We argue that the use-plan analysis of artefact use and design can be combined with the Unified Theory of Acceptance and Use of Technology (UTAUT), a well-tested model for predicting the adoption of information systems in organizational contexts. After presenting the outlines of the use-plan

  10. Acceptance of Agri-Food Nanotechnology

    NARCIS (Netherlands)

    Gupta, Nidhi; Frewer, Lynn; Fischer, Arnout

    2017-01-01

    Food technology has evolved from being focused on the issues associated with food availability to include, more latterly, additional foci on food safety, sustainability and functionality. Despite the intuitive appeal of these beneficial factors in providing the basis for consumer acceptance of

  11. Acceptance of nuclear power: The Fukushima effect

    International Nuclear Information System (INIS)

    Siegrist, Michael; Visschers, Vivianne H.M.

    2013-01-01

    Utilizing a longitudinal study design, the impact of the 2011 accident in Fukushima on acceptance of nuclear power and the evaluation of several scenarios with different percentages of nuclear power were examined. Mail surveys were conducted in the German-speaking part of Switzerland. The first survey took place before the accident in Fukushima (Autumn 2010), the second survey immediately after the accident (March 2011), and the third survey half a year after the accident (October 2011). A sample of 463 persons participated in all three surveys. The accident had a negative impact on the acceptance of nuclear power. The mean change was moderate, and high correlations between the measurement points were observed. Overall, participants thus showed rather stable attitudes towards nuclear power across the three measurement waves. Results of the present study demonstrate the importance of prior beliefs and attitudes for the interpretation of an accident. The evaluation of the various scenarios was strongly influenced by participants’ pre-Fukushima attitudes towards nuclear power. - Highlights: ► Longitudinal studies are important for risk perception research. ► The accident in Fukushima had only a moderate impact on acceptance. ► Acceptance of nuclear power before and after Fukushima was highly correlated. ► People have stable attitudes towards nuclear power

  12. Women's role for public acceptance - WEN activities

    International Nuclear Information System (INIS)

    Asada, Kiyoe

    1999-01-01

    WEN (Women's Energy Network) is a national network of women working professionally in the field of public relations or technologies in various energy-related companies and organizations or interested in energy public acceptance (PA) activities including nuclear PA. This paper describes goals, organization, activities of WEN, and survey on public consciousness. 10 figs

  13. 29 CFR 1926.29 - Acceptable certifications.

    Science.gov (United States)

    2010-07-01

    ... Acceptable certifications. (a) Pressure vessels. Current and valid certification by an insurance company or... by an insurance company or regulatory authority attesting to the safe installation, inspection, and... types of pressure vessels and similar equipment are contained in subparts F and O of this part. ...

  14. Differentiated influences of risk perceptions on nuclear power acceptance according to acceptance targets: Evidence from Korea

    Directory of Open Access Journals (Sweden)

    Seungkook Roh

    2017-08-01

    Full Text Available The determinants of the public's nuclear power acceptance have received considerable attention as decisive factors regarding nuclear power policy. However, the contingency of the relative importance of different determinants has been less explored. Building on the literature of psychological distance between the individual and the object, the present study demonstrates that the relative effects of different types of perceived risks regarding nuclear power generation differ across acceptance targets. Using a sample of Korea, our results show that, regarding national acceptance of nuclear power generation, perceived risk from nuclear power plants exerts a stronger negative effect than that from radioactive waste management; however, the latter exerts a stronger negative effect than the former on local acceptance of a nuclear power plant. This finding provides implications for efficient public communication strategy to raise nuclear power acceptance.

  15. Differentiated influences of risk perceptions on nuclear power acceptance according to acceptance targets: Evidence from Korea

    International Nuclear Information System (INIS)

    Roh, Seung Kook; Lee, Jin Won

    2017-01-01

    The determinants of the public's nuclear power acceptance have received considerable attention as decisive factors regarding nuclear power policy. However, the contingency of the relative importance of different determinants has been less explored. Building on the literature of psychological distance between the individual and the object, the present study demonstrates that the relative effects of different types of perceived risks regarding nuclear power generation differ across acceptance targets. Using a sample of Korea, our results show that, regarding national acceptance of nuclear power generation, perceived risk from nuclear power plants exerts a stronger negative effect than that from radioactive waste management; however, the latter exerts a stronger negative effect than the former on local acceptance of a nuclear power plant. This finding provides implications for efficient public communication strategy to raise nuclear power acceptance

  16. Differentiated influences of risk perceptions on nuclear power acceptance according to acceptance targets: Evidence from Korea

    Energy Technology Data Exchange (ETDEWEB)

    Roh, Seung Kook [Policy Research Center, Korea Atomic Energy Research Institute (KAERI), Daejeon (Korea, Republic of); Lee, Jin Won [School of Management, Xiamen University, Xiamen (China)

    2017-08-15

    The determinants of the public's nuclear power acceptance have received considerable attention as decisive factors regarding nuclear power policy. However, the contingency of the relative importance of different determinants has been less explored. Building on the literature of psychological distance between the individual and the object, the present study demonstrates that the relative effects of different types of perceived risks regarding nuclear power generation differ across acceptance targets. Using a sample of Korea, our results show that, regarding national acceptance of nuclear power generation, perceived risk from nuclear power plants exerts a stronger negative effect than that from radioactive waste management; however, the latter exerts a stronger negative effect than the former on local acceptance of a nuclear power plant. This finding provides implications for efficient public communication strategy to raise nuclear power acceptance.

  17. Parental Acceptance of HPV Vaccine in Peru: A Decision Framework

    Science.gov (United States)

    Bartolini, Rosario M.; Winkler, Jennifer L.; Penny, Mary E.; LaMontagne, D. Scott

    2012-01-01

    Objective and Method Cervical cancer is the third most common cancer affecting women worldwide and it is an important cause of death, especially in developing countries. Cervical cancer is caused by human papillomavirus (HPV) and can be prevented by HPV vaccine. The challenge is to expand vaccine availability to countries where it is most needed. In 2008 Peru’s Ministry of Health implemented a demonstration project involving 5th grade girls in primary schools in the Piura region. We designed and conducted a qualitative study of the decision-making process among parents of girls, and developed a conceptual model describing the process of HPV vaccine acceptance. Results We found a nonlinear HPV decision-making process that evolved over time. Initially, the vaccine’s newness, the requirement of written consent, and provision of information were important. If information was sufficient and provided by credible sources, many parents accepted the vaccine. Later, after obtaining additional information from teachers, health personnel, and other trusted sources, more parents accepted vaccination. An understanding of the issues surrounding the vaccine developed, parents overcome fears and rumors, and engaged in family negotiations–including hearing the girl’s voice in the decision-making process. The concept of prevention (cancer as danger, future health, and trust in vaccines) combined with pragmatic factors (no cost, available at school) and the credibility of the offer (information in the media, recommendation of respected authority figure) were central to motivations that led parents to decide to vaccinate their daughters. A lack of confidence in the health system was the primary inhibitor of vaccine acceptance. Conclusions Health personnel and teachers are credible sources of information and can provide important support to HPV vaccination campaigns. PMID:23144719

  18. Parental acceptance of HPV vaccine in Peru: a decision framework.

    Directory of Open Access Journals (Sweden)

    Rosario M Bartolini

    Full Text Available Cervical cancer is the third most common cancer affecting women worldwide and it is an important cause of death, especially in developing countries. Cervical cancer is caused by human papillomavirus (HPV and can be prevented by HPV vaccine. The challenge is to expand vaccine availability to countries where it is most needed. In 2008 Peru's Ministry of Health implemented a demonstration project involving 5(th grade girls in primary schools in the Piura region. We designed and conducted a qualitative study of the decision-making process among parents of girls, and developed a conceptual model describing the process of HPV vaccine acceptance.We found a nonlinear HPV decision-making process that evolved over time. Initially, the vaccine's newness, the requirement of written consent, and provision of information were important. If information was sufficient and provided by credible sources, many parents accepted the vaccine. Later, after obtaining additional information from teachers, health personnel, and other trusted sources, more parents accepted vaccination. An understanding of the issues surrounding the vaccine developed, parents overcome fears and rumors, and engaged in family negotiations-including hearing the girl's voice in the decision-making process. The concept of prevention (cancer as danger, future health, and trust in vaccines combined with pragmatic factors (no cost, available at school and the credibility of the offer (information in the media, recommendation of respected authority figure were central to motivations that led parents to decide to vaccinate their daughters. A lack of confidence in the health system was the primary inhibitor of vaccine acceptance.Health personnel and teachers are credible sources of information and can provide important support to HPV vaccination campaigns.

  19. Utility requirements for fusion

    International Nuclear Information System (INIS)

    Vondrasek, R.J.

    1982-02-01

    This report describes work done and results obtained during performance of Task 1 of a study of Utility Requirements and Criteria for Fusion Options. The work consisted of developing a list of utility requirements for fusion optics containing definition of the requirements and showing their relative importance to the utility industry. The project team members developed a preliminary list which was refined by discussions and literature searches. The refined list was recast as a questionnaire which was sent to a substantial portion of the utility industry in this country. Forty-three questionnaire recipients responded including thirty-two utilities. A workshop was held to develop a revised requirements list using the survey responses as a major input. The list prepared by the workshop was further refined by a panel consisting of vice presidents of the three project team firms. The results of the study indicate that in addition to considering the cost of energy for a power plant, utilities consider twenty-three other requirements. Four of the requirements were judged to be vital to plant acceptability: Plant Capital Cost, Financial Liability, Plant Safety and Licensability

  20. Sustainability and acceptance - new challenges for nuclear energy

    International Nuclear Information System (INIS)

    Lensa, W. von

    2001-01-01

    This paper discusses the concept of sustainability in relation to acceptance of nuclear energy. Acceptance is viewed in terms of public acceptance, industrial acceptance, and internal acceptance/consensus within the nuclear community. It addresses sustainability criteria, the need for innovation, and the different levels of acceptability. The mechanisms of risk perception are discussed along with the technological consequences from risk perception mechanisms leading to specific objections against nuclear energy. (author)

  1. The Public Acceptance of Biofuels and Bioethanol from Straw- how does this affect Geoscience

    Science.gov (United States)

    Jäger, Alexander; Ortner, Tina; Kahr, Heike

    2015-04-01

    The Public Acceptance of Biofuels and Bioethanol from Straw- how does this affect Geoscience The successful use of bioethanol as a fuel requires its widespread acceptance by consumers. Due to the planned introduction of a 10 per cent proportion of bioethanol in petrol in Austria, the University of Applied Sciences Upper Austria carried out a representative opinion poll to collect information on the population's acceptance of biofuels. Based on this survey, interviews with important stakeholders were held to discuss the results and collect recommendations on how to increase the information level and acceptance. The results indicate that there is a lack of interest and information about biofuels, especially among young people and women. First generation bioethanol is strongly associated with the waste of food resources, but the acceptance of the second generation, produced from agricultural remnants like straw from wheat or corn, is considerably higher. The interviewees see more transparent, objective and less technical information about biofuels as an essential way to raise the information level and acceptance rate. As the production of bioethanol from straw is now economically feasible, there is one major scientific question to answer: In which way does the withdrawal of straw from the fields affect the formation of humus and, therefore, the quality of the soil? An interdisciplinary approach of researchers in the fields of bioethanol production, geoscience and agriculture in combination with political decision makers are required to make the technologies of renewable bioenergy acceptable to the population.

  2. Methodology Used to Assess Acceptability of Oral Pediatric Medicines: A Systematic Literature Search and Narrative Review.

    Science.gov (United States)

    Mistry, Punam; Batchelor, Hannah

    2017-06-01

    Regulatory guidelines require that any new medicine designed for a pediatric population must be demonstrated as being acceptable to that population. There is currently no guidance on how to conduct or report on acceptability testing. Our objective was to undertake a review of the methods used to assess the acceptability of medicines within a pediatric population and use this review to propose the most appropriate methodology. We used a defined search strategy to identify literature reports of acceptability assessments of medicines conducted within pediatric populations and extracted information about the tools used in these studies for comparison across studies. In total, 61 articles were included in the analysis. Palatability was the most common (54/61) attribute measured when evaluating acceptability. Simple scale methods were most commonly used, with visual analog scales (VAS) and hedonic scales used both separately and in combination in 34 of the 61 studies. Hedonic scales alone were used in 14 studies and VAS alone in just five studies. Other tools included Likert scales; forced choice or preference; surveys or questionnaires; observations of facial expressions during administration, ease of swallowing, or ability to swallow the dosage; prevalence of complaints or refusal to take the medicine; and time taken for a nurse to administer the medicine. The best scale in terms of validity, reliability, feasibility, and preference to use when assessing acceptability remains unclear. Further work is required to select the most appropriate method to justify whether a medicine is acceptable to a pediatric population.

  3. Multi-discipline Waste Acceptance Process at the Nevada National Security Site - 13573

    Energy Technology Data Exchange (ETDEWEB)

    Carilli, Jhon T. [US Department Of Energy, Nevada Site Office, P. O. Box 98518, Las Vegas, Nevada 89193-8518 (United States); Krenzien, Susan K. [Navarro-Intera, LLC, P. O. Box 98952, Las Vegas, Nevada 89193-8952 (United States)

    2013-07-01

    The Nevada National Security Site low-level radioactive waste disposal facility acceptance process requires multiple disciplines to ensure the protection of workers, the public, and the environment. These disciplines, which include waste acceptance, nuclear criticality, safety, permitting, operations, and performance assessment, combine into the overall waste acceptance process to assess low-level radioactive waste streams for disposal at the Area 5 Radioactive Waste Management Site. Four waste streams recently highlighted the integration of these disciplines: the Oak Ridge Radioisotope Thermoelectric Generators and Consolidated Edison Uranium Solidification Project material, West Valley Melter, and classified waste. (authors)

  4. Acceptance test report for the Tank 241-C-106 in-tank imaging system

    International Nuclear Information System (INIS)

    Pedersen, L.T.

    1998-01-01

    This document presents the results of Acceptance Testing of the 241-C-106 in-tank video camera imaging system. The purpose of this imaging system is to monitor the Project W-320 sluicing of Tank 241-C-106. The objective of acceptance testing of the 241-C-106 video camera system was to verify that all equipment and components function in accordance with procurement specification requirements and original equipment manufacturer's (OEM) specifications. This document reports the results of the testing

  5. Darlington NGD fuel handling head eight acceptance program

    International Nuclear Information System (INIS)

    Skelton, P.H.; Sie, T.

    1996-01-01

    Darlington NGD requires eight fuelling machine heads to fuel the four 932 MW reactors. Six heads are used on the three fuelling machine trolleys for normal fuelling operations. A further two heads are required to allow for maintenance and to provide for such reactor face activities as PIPE and CIGAR. Seven heads were successfully delivered to site from the head supplier. During acceptance testing, stalls on the charge tube screw assembly of the eighth and final head prevented its delivery to site. Replacement of the charge tube screw with a spare screw did not alleviate the problem. An in depth series of tests were undertaken at site, at the supplier and at the screw sub-supplier to determine the root cause of the problem. These tests included taking torque measurements under different operating conditions and using different components to assess the effects of the changes on torque levels. An assessment of the effects of changing chemical conditions (particularly crud levels) was also made. To ensure that the results of the testing were well understood, additional torque testing was also completed on a head and screw assembly at site that was known to work well. Based on all of the above series of tests, a recommendation was made to re-machine the charge tube screw(s). The original charge tube screw from Head eight was subsequently returned to the sub-supplier for re-work. Follow-up torque measurements and acceptance testing showed that the screw rework was effective and that Head eight could be successfully delivered to site. This paper focuses on the results of the head/screw test program. Results of the acceptance testing are also discussed. (author). 2 refs., 4 figs

  6. Darlington NGD fuel handling head eight acceptance program

    Energy Technology Data Exchange (ETDEWEB)

    Skelton, P H; Sie, T [Ontario Hydro, Bowmanville (Canada). Darlington Nuclear Generating Station; Pilgrim, J [Canadian General Electric Co. Ltd., Toronto, ON (Canada)

    1997-12-31

    Darlington NGD requires eight fuelling machine heads to fuel the four 932 MW reactors. Six heads are used on the three fuelling machine trolleys for normal fuelling operations. A further two heads are required to allow for maintenance and to provide for such reactor face activities as PIPE and CIGAR. Seven heads were successfully delivered to site from the head supplier. During acceptance testing, stalls on the charge tube screw assembly of the eighth and final head prevented its delivery to site. Replacement of the charge tube screw with a spare screw did not alleviate the problem. An in depth series of tests were undertaken at site, at the supplier and at the screw sub-supplier to determine the root cause of the problem. These tests included taking torque measurements under different operating conditions and using different components to assess the effects of the changes on torque levels. An assessment of the effects of changing chemical conditions (particularly crud levels) was also made. To ensure that the results of the testing were well understood, additional torque testing was also completed on a head and screw assembly at site that was known to work well. Based on all of the above series of tests, a recommendation was made to re-machine the charge tube screw(s). The original charge tube screw from Head eight was subsequently returned to the sub-supplier for re-work. Follow-up torque measurements and acceptance testing showed that the screw rework was effective and that Head eight could be successfully delivered to site. This paper focuses on the results of the head/screw test program. Results of the acceptance testing are also discussed. (author). 2 refs., 4 figs.

  7. Key acceptability attributes of orodispersible films.

    Science.gov (United States)

    Scarpa, Mariagiovanna; Paudel, Amrit; Kloprogge, Frank; Hsiao, Wen Kai; Bresciani, Massimo; Gaisford, Simon; Orlu, Mine

    2018-04-01

    The features rendering orodispersible films (ODFs) patient-centric formulations are widely discussed in the scientific literature. However there is a lack of research studies exploring ODF characteristics with a potential impact on end-user acceptability. The aim of this study was to identify the key ODF characteristics affecting end-user acceptability by developing in vitro test methods for the prediction of ODFs acceptability and correlate these formulation characteristics with the data obtained from a human panel study. Four drug-free single-polymer films were prepared by solvent casting. Solutions of poly(vinyl) alcohol (PVOH) 39 KDa (P1), PVOH 197 KDa (P2), carboxymethylcellulose (CMC) 395 KDa (C1), and CMC 725 KDa (C2) were prepared. Texture analysis and Dynamic Mechanical Analysis (DMA) were used to assess film tack. Petri dish and drop methods were used to assess disintegration time. A human panel of 24 healthy young adults was employed to identify end-user acceptability criteria of the four study film samples. Texture analysis data of ODF tack were not found to be in agreement with the in vivo perceived stickiness in the mouth. However, measurement of the area under the adhesive force curve obtained by DMA correlated with in vivo perceived stickiness data for all samples. The disintegration times obtained by drop method were more comparable to human panel data than the petri dish method. Hence DMA and drop methods proved to be promising methodologies for the prediction of the end-user acceptability. The type and molecular weight of the film-forming polymer had a strong influence on stickiness perception, whereas only polymeric molecular weight influenced perceived disintegration time. The human panel study showed that Participant Reported Outcomes (PROs) for the perceived stickiness in the mouth and disintegration time of test films received significantly different scores between samples, and thus were identified as the key attributes with the

  8. Physics acceptance and QA procedures for IMRT

    International Nuclear Information System (INIS)

    LoSasso, T.; Ling, C.

    2001-01-01

    Full text: Intensity modulated radiation therapy (IMRT) may improve tumor control without compromising normal tissues by facilitating higher, more conformal tumor doses relative to 3D CRT. Intensity modulation (IM) is now possible with inverse planning and radiation delivery using dynamic multileaf collimation. Compared to 3D CRT, certain components in the IMRT process are more obscure to the user. Thus, special quality assurance procedures are required. Hardware and software are still relatively new to many users, and the potential for error is unknown. The relationship between monitor unit (MU) setting and radiation dose for IM beams is much more complex than for non-IM fields. The leaf sequence computer files, which control the MLC position as a function of MU, are large and do not lend themselves to simple manual verification. The 'verification' port film for each IM treatment field, usually obtained with the MLC set at the extreme leaf positions for that field to outline the entire irradiated area, does not verify the intensity modulation pattern. Finally, in IMRT using DMLC (the so-called sliding window technique), a small error in the window (or gap) width will lead to a significant dose error. In earlier papers, we provided an evaluation of the mechanical and dosimetric aspects in the use of a MLC in the dynamic mode. Mechanical tolerances are significantly tighter for DMLC than for static MLC treatments. Transmission through the leaves and through rounded leaf ends and head scatter were shown to be significant to the accuracy of radiation dose delivery using DMLC. With these considerations, we concluded that the present DMLC hardware and software are effective for routine clinical implementation, provided that a carefully designed routine QA procedure is followed to assure the normality of operation. In our earlier studies, an evaluation of the long-term stability of DMLC operation had not yet been performed. This paper describes the current status of our

  9. Role of market information in gaining public acceptance

    International Nuclear Information System (INIS)

    Berman, A.B.

    1992-01-01

    The nuclear energy industry challenge to gain acceptance for its next generation of nuclear power plants is immense. If not the majority, then a vocal minority, has doubts about the technology, its need, or those who implement it. Perceptions about the nuclear industry are complex. These are due to the difficulty in understanding the technology itself, the trade-offs of benefits against repercussions, and well-publicized plant problems. The industry requires a continual flow of actionable and comprehensive market information as input for decision making. The cost of implementing misdirected strategies is high. If not sensitive to public needs, the cost is opposition to nuclear development based on faulty or unsubstantiated reasoning. This paper addresses the required market information flow. It is suggested that a market information system is necessary for timely and usable information to ensure understanding of industry developmental efforts

  10. Construction and operation of replacement hazardous waste handling facility at Lawrence Berkeley Laboratory

    International Nuclear Information System (INIS)

    1992-09-01

    The US Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA-0423, for the construction and operation of a replacement hazardous waste handling facility (HWHF) and decontamination of the existing HWHF at Lawrence Berkeley Laboratory (LBL), Berkeley, California. The proposed facility would replace several older buildings and cargo containers currently being used for waste handling activities and consolidate the LBL's existing waste handling activities in one location. The nature of the waste handling activities and the waste volume and characteristics would not change as a result of construction of the new facility. Based on the analysis in the EA, DOE has determined that the proposed action would not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969, 42 USC. 4321 et seq. Therefore, an environmental impact statement is not required

  11. Construction and operation of replacement hazardous waste handling facility at Lawrence Berkeley Laboratory. Environmental Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1992-09-01

    The US Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA-0423, for the construction and operation of a replacement hazardous waste handling facility (HWHF) and decontamination of the existing HWHF at Lawrence Berkeley Laboratory (LBL), Berkeley, California. The proposed facility would replace several older buildings and cargo containers currently being used for waste handling activities and consolidate the LBL`s existing waste handling activities in one location. The nature of the waste handling activities and the waste volume and characteristics would not change as a result of construction of the new facility. Based on the analysis in the EA, DOE has determined that the proposed action would not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969, 42 USC. 4321 et seq. Therefore, an environmental impact statement is not required.

  12. Void fraction instrument acceptance test procedure

    International Nuclear Information System (INIS)

    Stokes, T.I.; Pearce, K.L.

    1994-01-01

    This document presents the results of the acceptance test for the mechanical and electrical features (not specifically addressed by the software ATP) of the void fraction instrument (VFI). Acceptance testing of the VFI, control console, and decontamination spray assembly was conducted in the 306E building high bay and area adjacent to the facility. The VFI was tested in the horizontal position supported in multiple locations on rolling tables. The control console was located next to the VFI pneumatic control assembly. The VFI system was operated exactly as is expected in the tank farm, with the following exceptions: power was provided from a building outlet and the VFI was horizontal. The testing described in this document verifies that the mechanical and electrical features are operating as designed and that the unit is ready for field service

  13. European consumers' acceptance of beef processing technologies

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Kügler, Jens Oliver; Grunert, Klaus G.

    2010-01-01

    The use of new technologies in beef production chains may affect consumers' opinion of meat products. A qualitative study was performed to investigate consumers' acceptance of seven beef processing technologies: marinating by injection aiming for increased 1) healthiness; 2) safety; and 3) eating...... adults (19-60 years old) participated in eight focus groups in Spain, France, Germany and the UK. Results suggested a relationship between acceptance of new beef products, technology familiarity and perceived risks related to its application. Excessive manipulation and fear of moving away from 'natural......' beef were considered negative outcomes of technological innovations. Beef processing technologies were predominantly perceived as valuable options for convenience shoppers and less demanding consumers. Overall, respondents supported the development of 'non-invasive' technologies that were able...

  14. Waste management facility acceptance - some findings

    International Nuclear Information System (INIS)

    Sigmon, B.

    1987-01-01

    Acceptance of waste management facilities remains a significant problem, despite years of efforts to reassure potential host communities. The tangible economic benefits from jobs, taxes, and expenditures are generally small, while the intangible risks of environmental or other impacts are difficult to evaluate and understand. No magic formula for winning local acceptance has yet been found. Limited case study and survey work does suggest some pitfalls to be avoided and some directions to be pursued. Among the most significant is the importance that communities place on controlling their own destiny. Finding a meaningful role for communities in the planning and operation of waste management facilities is a challenge that would-be developers should approach with the same creativity that characterizes their technical efforts

  15. Functional food acceptance in the food chain

    DEFF Research Database (Denmark)

    Krutulyte, Rasa

    This thesis analyses consumer acceptance of functional foods and food manufacturers' decision to develop functional foods. The thesis sets up four key research questions: (1) How consumers accept functional foods enriched with omega-3? (2) How the intention of purchasing carrier ingredient...... another central issue of the paper. Results revealed that the general attitudes towards functional foods are related to the purchase intention with regard to functional foods described by their carrier/ingredient combinations. Consumers' attitudes towards specific carrier ingredient combinations define...... influence food manufacturers' decision making with regards to production of functional foods. Internal factors such as organisational characteristics, innovation characteristics, and external factors such as functional food ingredient suppliers' marketing efforts, collaboration between suppliers and food...

  16. Outline for an acceptable nuclear future

    Energy Technology Data Exchange (ETDEWEB)

    Weinberg, A.M.

    1977-07-01

    Nuclear energy is likely to develop in two phases. Phase I, based on burner reactors, is self-limiting because the reserve of uranium is limited. Phase II, based on breeders, might last for an extremely long time. It is suggested that opposition to Phase I of nuclear energy might be reduced if an acceptable Phase II can be constructed. Elements of an acceptable Phase II might include isolated and collocated energy centers with resident IAEA inspectors; heavier security; professionalization of the nuclear cadre; immortality of the operating entities; and separation of generation and distribution. Though these measures are aimed primarily at increasing the safety and reliability of the nuclear system, it is suggested that the proposed siting policy, with IAEA resident inspection, might be more proliferation-resistant than is the current dispersed system.

  17. Radioactive waste disposal and public acceptance aspects

    Energy Technology Data Exchange (ETDEWEB)

    Ulhoa, Barbara M.A.; Aleixo, Bruna L.; Mourao, Rogerio P.; Ferreira, Vinicius V.M., E-mail: mouraor@cdtn.b, E-mail: vvmf@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    Part of the public opinion around the world considers the wastes generated due to nuclear applications as the biggest environmental problem of the present time. The development of a solution that satisfies everybody is a great challenge, in that obtaining public acceptance for nuclear enterprises is much more challenging than solving the technical issues involved. Considering that the offering of a final solution that closes the radioactive waste cycle has a potentially positive impact on public opinion, the objective of this work is to evaluate the amount of the radioactive waste volume disposed in a five-year period in several countries and gauge the public opinion regarding nuclear energy. The results show that the volume of disposed radioactive waste increased, a fact that stresses the importance of promoting discussions about repositories and public acceptance. (author)

  18. Acceptable risk in reactor safety studies

    International Nuclear Information System (INIS)

    Benjamin, J.R.; Shinozuka, M.; Shah, H.C.

    1975-01-01

    Acceptable risk is defined in terms of its five basic parameters: the hazard or problem; the probability of occurrence; the consequence; the possible alternative actions; and the value system of the community or the society. The problem of consistency in design at a site and between differing sites is discussed and solutions are suggested. Techniques for consistent deterministic and probabilistic setting limits and design standards are illustrated using data from AEC Reactor Safety Study, WASH-1400. The influence of level of consequence is discussed and a general methodology for decision analysis in resource allocation problem is briefly introduced and illustrated. The concept of acceptable risk is put in a quantitative format that can be used by engineers and planners. Bayesian statistical methods are introduced to develop the methodologies

  19. Social acceptance of comparative optimism and realism.

    Science.gov (United States)

    Milhabet, I; Verlhiac, J F

    2011-10-01

    Studies of optimism and realism (the accuracy of people's outlook on the future) seek to understand the respective effects of these elements on social approbation. Two experiments examined how comparative optimism (vs. pessimism) and realism (vs. unrealism) interacted to influence the targets' social acceptance based on their perceptions about the future. The results showed that realism, or accuracy of prediction, increased the positive social effects of a comparatively optimistic outlook on the future. In contrast, targets who exhibited comparative pessimism were more socially acceptable when their predictions were unrealistic rather than realistic. This phenomenon was examined by also considering the polarity of the events about which judgments were expressed. These results contribute to the body of research about the relationship between optimism and pessimism and the relationship between optimism and realism.

  20. Radioactive waste disposal and public acceptance aspects

    International Nuclear Information System (INIS)

    Ulhoa, Barbara M.A.; Aleixo, Bruna L.; Mourao, Rogerio P.; Ferreira, Vinicius V.M.

    2011-01-01

    Part of the public opinion around the world considers the wastes generated due to nuclear applications as the biggest environmental problem of the present time. The development of a solution that satisfies everybody is a great challenge, in that obtaining public acceptance for nuclear enterprises is much more challenging than solving the technical issues involved. Considering that the offering of a final solution that closes the radioactive waste cycle has a potentially positive impact on public opinion, the objective of this work is to evaluate the amount of the radioactive waste volume disposed in a five-year period in several countries and gauge the public opinion regarding nuclear energy. The results show that the volume of disposed radioactive waste increased, a fact that stresses the importance of promoting discussions about repositories and public acceptance. (author)

  1. Quality Assurance Requirements and Description

    International Nuclear Information System (INIS)

    Ram Murthy

    2002-01-01

    The Quality Assurance Requirements and Description (QARD) is the principal Quality Assurance (QA) document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the QA program [INTRODUCTION :1p2s (NOT A REQUIREMENT)]. The QARD contains regulatory requirements and program commitments necessary for the development of an effective QA program [INTRODUCTION :1p3s (NOT A REQUIREMENT)]. Implementing documents must be based on, and be consistent with the QARD. The QARD applies to the following: (1) Acceptance of spent nuclear fuel and high-level waste. (2) Transport of spent nuclear fuel and high-level waste. (3) Storage of spent nuclear fuel through receipt of storage cask certification or a facility operating license. (4) Monitored Geologic Repository, including the site characterization activities [Exploratory Studies Facility (ESF) and surface based testing], through receipt of an operating license. (5) High-level waste form development through qualification, production, and acceptance. (6) Characterization of DOE spent nuclear fuel, and conditioning through acceptance of DOE spent nuclear fuel. Section 2.0, Quality Assurance Program, defines in greater detail criteria for determining work subject to the QARD

  2. Proposals now being accepted for 'INCITE'

    CERN Multimedia

    2003-01-01

    Secretary of Energy, Spencer Abraham, has announced that proposals are now being accepted for a new DOE Office of Science program to support innovative, large-scale computational science projects. The program, entitled "Innovative and Novel Computational Impact on Theory and Experiment" will award a total of 4.5 million supercomputer processor hours and 100 trillion bytes of data storage space at the National Energy Research Scientific Computing Center at DOE's Lawrence Berkeley National Laboratory (1 page).

  3. Measuring social risk and determining its acceptability

    International Nuclear Information System (INIS)

    Lathrop, J.W.

    1978-01-01

    The implementation of a nuclear waste management technology raises several issues concerning the regulation of social risk. This paper presents a decision analytic approach to resolving some of those issues. A methodology for developing a radiological risk measure is presented, and several approaches to defining acceptable levels of that risk measure are considered. The methodology presented is oriented toward the development of radiological performance objectives for use as guidance in the drafting of regulations

  4. Perceived acceptability of female smoking in China.

    Science.gov (United States)

    Sansone, Natalie; Yong, Hua-Hie; Li, Lin; Jiang, Yuan; Fong, Geoffrey T

    2015-11-01

    Female smoking prevalence in China is very low but may rise with increased tobacco marketing towards women and changing norms. However, little is known about current perceptions of women smoking in China. This study sought to examine smokers' and non-smokers' perceived acceptability of female smoking and how it changed over time in China. Data come from Waves 1 to 3 (2006-2009) of the International Tobacco Control China Survey, a face-to-face cohort survey of approximately 800 adult smokers and 200 non-smokers in each of seven cities in mainland China. At Wave 3 (2009), about 38% of smokers and 9% of non-smokers agreed that female smoking is acceptable with women being almost twice as likely to do so as men (67% vs 36% and 11% vs 6%, respectively). In addition to women, smokers who were younger and had more positive perceptions of smoking in general were more likely to say that female smoking is acceptable. This perception significantly increased from Wave 1 (2006) to Wave 3 (2009), as did the perception that smoking is a sign of sophistication, but other general perceptions of smoking did not significantly change between 2006 and 2009. Norms against female smoking appear to remain strong in China, but female smoking may be becoming more acceptable. It is important to monitor these perceptions to prevent a rise in female smoking prevalence along with an increase in tobacco-related death and disease among women in China. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  5. Aspects of audit. 4: Acceptability of audit.

    OpenAIRE

    Shaw, C D

    1980-01-01

    Whether or not audit is accepted in Britain will be determined principally by how it is controlled, how much it costs, and how effective it is. The objectives of audit have been defined as education, planning, evaluation, research, and anticipatory diplomacy--that is, starting internal audit before external audit is imposed on the medical profession. Published reports suggest that in Britain internal audit would be more effective andless expensive than the complex professional standards revie...

  6. Acceptance test report 2721-Z upgrades

    International Nuclear Information System (INIS)

    Keck, R.D.

    1998-01-01

    This test procedure provides instructions for acceptance testing of modifications to the 2721-Z diesel-generator system made by Project C-189. The modifications include (1) replacing the generator NUMA-LOGIC controller with connection to the PFP distributed control system (DCS), (2) replacing ATSI with a breaker switching scheme for 2736-ZB backup power and (3) providing a method for generator load and system testing

  7. Consumer studies acceptability on irradiated food

    International Nuclear Information System (INIS)

    Lescano, G.

    1987-01-01

    A questionary to 119 professionals connected with the food field was performed in order to know their attitude, doubts and concernings about food irradiation considering that a favourable opinion would produce trust to the consumer market. The first part of the questionary showed the following results: 13% had never heard about food irradiation (FI), 72% were few familiarized with it, and 14% knew the subject; 42% would accept FI, 37% probably would accept it, 19% could not make up their minds and 2% would not accept it; 45% would eat irradiated food (IF), 45% probably would eat it, 8% probably would not eat it and 2% would not eat it; 44% would serve IF in their home, 45% would probably do so, 8% would probably not do it, and 3% would not do it. The second part showed that 67% of people thought that ionizing radiation (IR) improved the sanitary quality of food, 3% did not think so, and 29% did not know; 63% thought that IR is preferible to chemical preservatives, 4% did not think so and 33% did not know; 11% thought that the food treated with IR becomes radioactive, 60% did not think so, and 29% did not know; 42% thought that FI is wholesome, 8% did not think so, and 50% did not know; 8% consider that the majority of the persons would eat IF, 40% did not think so and 52% did not know; 82% consider necessary that IF have an identificatory label, 10% did not think so, and 8% did not know; 95% consider necessary more diffusion of this method before its commercialization, 2% did not think so and 3% did not know, and 81% want more information, 18% would want it and 1% do not want it. These results are considered to be a good sign of future consumption acceptability of food irradiation. (Author)

  8. Antiseptic technology: access, affordability, and acceptance.

    OpenAIRE

    Boyce, J. M.

    2001-01-01

    Factors other than antimicrobial activity of soaps and antiseptic agents used for hand hygiene by health personnel play a role in compliance with recommendations. Hand hygiene products differ considerably in acceptance by hospital personnel. If switching from a nonmedicated soap to an antiseptic agent or increased use of an existing antiseptic agent for hand hygiene prevented a few more infections per year, additional expenditures for antiseptic agents would be offset by cost savings.

  9. Considerations for acceptability in Bible translation

    Directory of Open Access Journals (Sweden)

    Diphus C. Chemorion

    2009-09-01

    Full Text Available The ministry of Bible translation is an important component of the Great Commission (Matthew 28:18�20 and its mandate is to reach everyone with the word of God. One of the main goals of a Bible translation project is to produce a translation that will be used by the church in a given language group. Bible translation teams believe that the lives of the intended recipients will be changed positively when they gain access to Scripture in their own language. However, recent developments regarding Scripture use have shown that the success of any Bible translation project depends on whether or not its products are acceptable. If a translation is not acceptable to the intended audience, it may not be used, and as a result, it may fail to bring about the desired impact. This article explores the concept of �acceptability� as used in Bible translation and highlights important considerations that translators need to keep in mind in order to enhance the acceptability of their translation products.

  10. Acceptability of contraception for men: a review.

    Science.gov (United States)

    Glasier, Anna

    2010-11-01

    Methods of contraception for use by men include condoms, withdrawal and vasectomy. Prevalence of use of a method and continuation rates are indirect measures of acceptability. Worldwide, none of these "male methods" accounts for more than 7% of contraceptive use although uptake varies considerably between countries. Acceptability can be assessed directly by asking about intended (hypothetical) use and assessing satisfaction during/after use. Since they have been around for a very long time, there are very few data of this nature on condoms (as contraceptives rather than for prevention of infection), withdrawal or vasectomy. There are direct data on the acceptability of hormonal methods for men but from relatively small clinical trials which undoubtedly do not represent the real world. Surveys undertaken among the male general public demonstrate that, whatever the setting, at least 25% of men - and in most countries substantially more - would consider using hormonal contraception. Although probably an overestimate of the number of potential users when such a method becomes available, it would appear that hormonal contraceptives for men may have an important place on the contraceptive menu. Despite commonly expressed views to the contrary, most women would trust their male partner to use a hormonal method. Copyright © 2010 Elsevier Inc. All rights reserved.

  11. Geometrical Acceptance Analysis for RPC PAC Trigger

    CERN Document Server

    Seo, Eunsung

    2010-01-01

    The CMS(Compact Muon Solenoid) is one of the four experiments that will analyze the collision results of the protons accelerated by the Large Hardron Collider(LHC) at CERN(Conseil Europen pour la Recherche Nuclaire). In case of the CMS experiment, the trigger system is divided into two stages : The Level-1 Trigger and High Level Trigger. The RPC(Resistive Plate Chamber) PAC(PAttern Comparator) Trigger system, which is a subject of this thesis, is a part of the Level-1 Muon Trigger System. Main task of the PAC Trigger is to identify muons, measures transverse momenta and select the best muon candidates for each proton bunch collision occurring every 25 ns. To calculate the value of PAC Trigger efficiency for triggerable muon, two terms of different efficiencies are needed ; acceptance efficiency and chamber efficiency. Main goal of the works described in this thesis is obtaining the acceptance efficiency of the PAC Trigger in each logical cone. Acceptance efficiency is a convolution of the chambers geometry an...

  12. Rationality, Theory Acceptance and Decision Theory

    Directory of Open Access Journals (Sweden)

    J. Nicolas Kaufmann

    1998-06-01

    Full Text Available Following Kuhn's main thesis according to which theory revision and acceptance is always paradigm relative, I propose to outline some possible consequences of such a view. First, asking the question in what sense Bayesian decision theory could serve as the appropriate (normative theory of rationality examined from the point of view of the epistemology of theory acceptance, I argue that Bayesianism leads to a narrow conception of theory acceptance. Second, regarding the different types of theory revision, i.e. expansion, contraction, replacement and residuals shifts, I extract from Kuhn's view a series of indications showing that theory replacement cannot be rationalized within the framework of Bayesian decision theory, not even within a more sophisticated version of that model. Third, and finally, I will point to the need for a more comprehensive model of rationality than the Bayesian expected utility maximization model, the need for a model which could better deal with the different aspects of theory replacement. I will show that Kuhn's distinction between normal and revolutionary science gives us several hints for a more adequate theory of rationality in science. I will also show that Kuhn is not in a position to fully articulate his main ideas and that he well be confronted with a serious problem concerning collective choice of a paradigm.

  13. Acceptability of male condom: An Indian scenario

    Directory of Open Access Journals (Sweden)

    Balaiah Donta

    2014-01-01

    Full Text Available The National Family Planning Programme of India had introduced condom as one of the family planning methods in the late1960s. Condom was promoted as a family planning method through social marketing since its inception. With the increasing prevalence and incidence of sexually transmitted infections (STIs including HIV/AIDS, condom was also promoted as a dual method for protection against both unintended pregnancies as well as sexually transmitted infections. Despite efforts at various levels, the overall use of condom among couples in India is low. Here we present literature review of studies to understand the condom acceptability among couples in India. Specifically, the paper assesses research and programmes that have been carried out to increase the use of condom among couples; determinants of condom use; reason for not using condom; and perception versus experience of condom failure. The reported problems related to condom use included non acceptance by partner, perceived ineffectiveness, less comfort, lack of sexual satisfaction, husband′s alcohol use, depression, and anxiety, and not available at that instant. The role of media in the promotion of condom use was indicated as an important way to increase awareness and use. Multiple strategies would help in acceptance of male condom.

  14. G+ COMMUNITY: MEASURING TEACHERS’ READINESS AND ACCEPTANCE

    Directory of Open Access Journals (Sweden)

    Mohd Faisal Farish Ishak

    2017-08-01

    Full Text Available The purpose of this paper is to explore teachers’ acceptance and readiness in using the cloud-based community as a platform for professional collaboration related to their teaching and learning. Familiarity with certain social networking platforms has made the preferable collaboration among teachers only limited to using Facebook, WhatsApp or Telegram. However, with time and space constraints in schools, some of the sharing sessions could not be done effectively most of the time. The study focuses on teachers’ acceptance and readiness of having their community in the cloud when they were introduced to the platform during a Continuous Professional Development (CPD course. A total number of 61 teachers used Google Community named as ‘Contemporary Children’s Literature (CCL 2016’ as a platform for their Professional Learning Community (PLC during the course. Descriptive analysis was done using Google Sheets and the findings show that these teachers are receptive towards Google Community in terms of its engagement level, usefulness as well as ease of use. The introduction to Google Community has created a new pathway for their collaboration especially for teaching and learning purposes. In a nutshell, their acceptance towards the cloud-based community indicates that, given the right training channel, teachers are positive and opened to utilising and integrating the cloud-based technology in their current teaching practice.

  15. Hybrid carbon incentive mechanisms and political acceptability

    International Nuclear Information System (INIS)

    Vollebergh, H.R.J.; De Vries, J.L.; Koutstaal, P.R.

    1997-01-01

    In this paper it is analyzed how hybrid systems of carbon taxes and tradeable permits optimize some conflicting dimensions of political acceptability related to the design of these instruments. Pure systems like taxes without exemptions or auctioned tradeable permits cause problems for political acceptability in open economies due to high overall costs (abatement cost plus payments on the tax or auctions) for current polluters. Unfortunately, pure systems based on grandfathering of emission rights across the board do not provide a feasible alternative because of monitoring and enforcement problems. In contrast, consciously designed hybrid systems employ grandfathering of emission rights together with either carbon taxes or auctioned carbon permits in order to overcome acceptability problems of pure systems, while leaving incentives to reduce emissions at the margin untouched. Moreover, monitoring and enforcement costs of the hybrid systems are less due to the lower number of participating agents compared with the pure systems, while opportunities for cost- or burden-sharing exist as well. 3 figs., 4 tabs., 23 refs

  16. A structural model of technology acceptance

    Directory of Open Access Journals (Sweden)

    Etienne Erasmus

    2015-04-01

    Research purpose: The aim of this study was to test the technology acceptance model within a South African SAP® Enterprise Resource Planning user environment. Motivation for the study: No study could be traced in which the technology acceptance model has been evaluated in the South African context. Research approach, design and method: A cross-sectional survey design was used. The 23-item Technology Acceptance Model Questionnaire was deployed amongst SAP® Enterprise Resource Planning users (N = 241. Main findings: The results confirmed significant paths from perceived usefulness of the information system to attitudes towards and behavioural intentions to use it. Furthermore, behavioural intention to use the system predicted actual use thereof. Perceived ease of use indirectly affected attitudes towards and behavioural intentions to use via perceived usefulness of the information system. Practical/managerial implications: Practitioners should build user confidence by ensuring the ease of use of a new system, providing relevant education, training and guidance and reiterating its usefulness and future added value to the user’s job and career. Contribution/value-add: This study contributes to scientific knowledge regarding the influence of individuals’ perceptions of information system usage on their attitudes, behavioural intentions and actual use of such a system.

  17. Evaluation of the Acceptance of Audience Response System by Corporations Using the Technology Acceptance Model

    Science.gov (United States)

    Chu, Hsing-Hui; Lu, Ta-Jung; Wann, Jong-Wen

    The purpose of this research is to explore enterprises' acceptance of Audience Response System (ARS) using Technology Acceptance Model (TAM). The findings show that (1) IT characteristics and facilitating conditions could be external variables of TAM. (2) The degree of E-business has positive significant correlation with behavioral intention of employees. (3) TAM is a good model to predict and explain IT acceptance. (4) Demographic variables, industry and firm characteristics have no significant correlation with ARS acceptance. The results provide useful information to managers and ARS providers that (1) ARS providers should focus more on creating different usages to enhance interactivity and employees' using intention. (2) Managers should pay attention to build sound internal facilitating conditions for introducing IT. (3) According to the degree of E-business, managers should set up strategic stages of introducing IT. (4) Providers should increase product promotion and also leverage academic and government to promote ARS.

  18. Gerontechnology acceptance by elderly Hong Kong Chinese: a senior technology acceptance model (STAM).

    Science.gov (United States)

    Chen, Ke; Chan, Alan Hoi Shou

    2014-01-01

    The purpose of this study was to develop and test a senior technology acceptance model (STAM) aimed at understanding the acceptance of gerontechnology by older Hong Kong Chinese people. The proposed STAM extended previous technology acceptance models and theories by adding age-related health and ability characteristics of older people. The proposed STAM was empirically tested using a cross-sectional questionnaire survey with a sample of 1012 seniors aged 55 and over in Hong Kong. The result showed that STAM was strongly supported and could explain 68% of the variance in the use of gerontechnology. For older Hong Kong Chinese, individual attributes, which include age, gender, education, gerontechnology self-efficacy and anxiety, and health and ability characteristics, as well as facilitating conditions explicitly and directly affected technology acceptance. These were better predictors of gerontechnology usage behaviour (UB) than the conventionally used attitudinal factors (usefulness and ease of use).

  19. Certification Plan, low-level waste Hazardous Waste Handling Facility

    International Nuclear Information System (INIS)

    Albert, R.

    1992-01-01

    The purpose of this plan is to describe the organization and methodology for the certification of low-level radioactive waste (LLW) handled in the Hazardous Waste Handling Facility (HWHF) at Lawrence Berkeley Laboratory (LBL). This plan also incorporates the applicable elements of waste reduction, which include both up-front minimization and end-product treatment to reduce the volume and toxicity of the waste; segregation of the waste as it applies to certification; an executive summary of the Waste Management Quality Assurance Implementing Management Plan (QAIMP) for the HWHF and a list of the current and planned implementing procedures used in waste certification. This plan provides guidance from the HWHF to waste generators, waste handlers, and the Waste Certification Specialist to enable them to conduct their activities and carry out their responsibilities in a manner that complies with the requirements of WHC-WAC. Waste generators have the primary responsibility for the proper characterization of LLW. The Waste Certification Specialist verifies and certifies that LBL LLW is characterized, handled, and shipped in accordance with the requirements of WHC-WAC. Certification is the governing process in which LBL personnel conduct their waste generating and waste handling activities in such a manner that the Waste Certification Specialist can verify that the requirements of WHC-WAC are met

  20. Public acceptance and preferences related to renewable energy and grid expansion policy: Empirical insights for Germany

    International Nuclear Information System (INIS)

    Bertsch, Valentin; Hall, Margeret; Weinhardt, Christof; Fichtner, Wolf

    2016-01-01

    The rapid expansion of renewable energy sources (RES) in many European countries brings about transmission grid expansion requirements. While the transition towards RES-based energy systems is largely perceived positively in general, locally both RES and grid expansion are often confronted with a lack of public acceptance. Using Germany as a case study, we analyse public acceptance of energy infrastructure and its main drivers on local vs. national levels. For this purpose, we conducted a nationally representative survey. Our results show that, on a national level, the acceptance of RES is very high and there is also a high acceptance of grid expansion if it helps to increase the share of RES in the system. In terms of local acceptance problems that may arise for most considered technologies, concerns about landscape modification turn out to be the main driving factor. Moreover, the distance between places of residence and places of energy infrastructure construction is crucial. While acceptance or rejection of technologies will never be entirely tangible or explicable, we find the explicability of rejections to be lowest for new technologies. Finally, age and education turn out to be the most relevant socio-demographic variables determining the participants' acceptance. - Highlights: • A survey to understand drivers of energy technology acceptance was conducted. • Participants were asked to rank energy policy objectives. • Strong differences between acceptance on a national vs. a local level were found. • Landscape modification is the most important factor driving the local acceptance. • Age and education turned out to be the most relevant socio-demographic factors.

  1. Acceptable Knowledge Summary Report for Waste Stream: SR-T001-221F-HET/Drums

    International Nuclear Information System (INIS)

    Lunsford, G.F.

    1999-01-01

    This report is fully responsive to the requirements of Section 4.0 ''Acceptable Knowledge'' from the WIPP Transuranic Waste Characterization Quality Assurance Plan, CAO-94-1010, and provides a sound, (and auditable) characterization that satisfies the WIPP criteria for Acceptable Knowledge

  2. HPV vaccination acceptability in young boys

    Directory of Open Access Journals (Sweden)

    Giancarlo Tisi

    2013-09-01

    Full Text Available PURPOSE: The aim of this study was to evaluate the comprehension and acceptance of HPV vaccination in parents of adolescent boys aged 11 to 15 years. METHODS: A cross-sectional survey was conducted by means of questionnaires sent directly to the homes of all families with young males aged between 11 and 15, residents of three municipalities of the Province of Brescia, Italy. The documentation also contained an informative leaflet summarizing the HPV-related disease characteristics, the burden of disease and the available strategies for prevention and treatment, illustrating the rationale of vaccination and describing the project and its phases. The questionnaire included questions on demographic data, acceptance and motivations for HPV vaccination. The collected data was analyzed using descriptive statistics. At the end of the study, parents who received the questionnaires were also offered the possibility of vaccinating their male sons for free. RESULTS: From a total of 1072 questionnaires sent, 161 where returned from the three selected municipalities (average response rate 15%; 97% of adolescent males involved in the study were Italian and 91% Catholic; 97% of parents declared themselves to be willing to vaccinate their sons: the principal motivation given (92% was prevention of the disease, cancerous or not, related to viral infection. Among the respondents not willing to vaccinate their sons, the motivation was lack of information about the vaccine and the disease. At the end of the study, around 71 boys were vaccinated. DISCUSSION: To our knowledge, this is the first survey in Italy exclusively conducted on parents of adolescent males about the acceptability and feasibility of vaccination against HPV: a very high percentage of respondents was favorable to accept the vaccination for their sons, the main motivation being the fact that parents considered protecting their sons from HPV-related diseases highly important. Of the 161 boys

  3. Predicting Public Acceptability in Controversial Technologies

    International Nuclear Information System (INIS)

    Bruce, Donald M.

    2003-01-01

    Technology and society have a synergic relationship. New technologies are a product of the values and aspirations of the culture in which they emerge. In turn, each new technology shapes and alters these values and aspirations, to a greater or lesser degree. The acceptance by society of any particular technology depends, however, on how far the values embodied in the technology reflect those of the wider society, or only those of some privileged sector - perhaps a ruling elite, a group of academic researchers, a commercial company, or even a special interest group. As public disquiet about controversial technologies has grown, their acceptance can no longer be taken for granted. It is now becoming more important to evaluate in advance the degree of likely mismatch between the aspirations of the technologists and the values of society. This paper explores one approach to making this evaluation, based on the notion of a conditional social contract between technology and society. A given society may be prepared to embrace a new technology to deliver certain benefits, and may accept a certain degree of risk and adaptation of life styles, provided certain basic conditions are fulfilled. These conditions include the upholding of basic values, familiarity, how it compares with similar technologies, the degree of control and choice, trust in those in control, the nature of any risks, the tangible benefits, and the media profile given to the new area. If several of these factors are not fulfilled, the technology is unlikely to be accepted. This was dramatically illustrated in the UK public reaction to food products derived from imported US GM soya and maize. These failed nearly all the conditions, so that public rejection should have been seen as a foregone conclusion. In the light of this, the likely public reaction to a number of future biotechnological innovations is assessed, based on the same conditions. Some examples taken from the energy sector are also compared. The

  4. Acceptance of health information technology in health professionals: An application of the revised technology acceptance model

    OpenAIRE

    Ketikidis, P.; Dimitrovski, T.; Lazuras, L.; Bath, P.A.

    2012-01-01

    The response of health professionals to the use of health information technology (HIT) is an important research topic that can partly explain the success or failure of any HIT application. The present study applied a modified version of the revised technology acceptance model (TAM) to assess the relevant beliefs and acceptance of HIT systems in a sample of health professionals (n = 133). Structured anonymous questionnaires were used and a cross-sectional design was employed. The main outcome ...

  5. Zone of Acceptance Under Performance Measurement: Does Performance Information Affect Employee Acceptance of Management Authority?

    DEFF Research Database (Denmark)

    Nielsen, Poul Aaes; Jacobsen, Christian Bøtcher

    2018-01-01

    Public sector employees have traditionally enjoyed substantial influence and bargaining power in organizational decision making, but few studies have investigated the formation of employee acceptance of management authority. Drawing on the “romance of leadership” perspective, the authors argue th...... that performance measurement can alter public sector authority relations and have implications regarding how public managers can use performance information strategically to gain acceptance of management authority and organizational change....

  6. Reinforcement learning for Order Acceptance on a shared resource

    NARCIS (Netherlands)

    Mainegra Hing, M.; van Harten, Aart; Schuur, Peter

    2002-01-01

    Order acceptance (OA) is one of the main functions in business control. Basically, OA involves for each order a reject/accept decision. Always accepting an order when capacity is available could disable the system to accept more convenient orders in the future with opportunity losses as a

  7. 48 CFR 552.270-29 - Acceptance of Space.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Acceptance of Space. 552... Acceptance of Space. As prescribed in 570.603, insert the following clause: Acceptance of Space (SEP 1999) (a... designated representative shall promptly inspect the space. (b) The Government will accept the space and the...

  8. 12 CFR 412.7 - Conditions for acceptance.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Conditions for acceptance. 412.7 Section 412.7 Banks and Banking EXPORT-IMPORT BANK OF THE UNITED STATES ACCEPTANCE OF PAYMENT FROM A NON-FEDERAL SOURCE FOR TRAVEL EXPENSES § 412.7 Conditions for acceptance. (a) Eximbank may accept payment for...

  9. Public Acceptance of Nuclear Energy in Mexico

    International Nuclear Information System (INIS)

    Ramirez-Sanchez, Jose R.; Alonso, Gustavo; Palacios, H. Javier

    2006-01-01

    The nuclear energy is attracting renewed interest of public and policy makers due to his potential role in long term strategies aiming to reduce the risk of global warming and in a more general, to carry out sustainable policies, however, any project of nuclear nature arise concerns about the risks associated with the release of radioactivity during accident conditions, radioactive waste disposal and nuclear weapons proliferation. Then in light of the likeliness for a new nuclear project in Mexico, is necessary to design a strategy to improve the social acceptance of nuclear power. This concern is been boarding since the environmental and economic point of view. The information that can change the perception of nuclear energy towards increase public acceptance, should be an honest debate about the benefits of nuclear energy, of course there are questions and they have to be answered, but in a realistic and scientific way: So thinking in Mexico as a first step it is important to communicate to the government entities and political parties that nuclear energy is a proven asset that it is emission free and safe. Of course besides the guarantee of a proven technology, clean and safe relies the economic fact, and in Mexico this could be the most important aspect to communicate to key people in government. Based in the Laguna Verde survey it is clear that we have to find the adequate means to distribute the real information concerning nuclear technology to the public, because the results shows that Mexican people does not have complete information about nuclear energy, but public can support it when they have enough information. From the IAEA study we can say that in Mexico public acceptance of nuclear energy it s not so bad, is the highest percentage of acceptance of nuclear technology for health, considering benefits to the environment Mexican opposition to build new plants is the second less percentage, and generally speaking 60% of the people accept somehow nuclear

  10. MEASUREMENT FOR ACCEPTANCE OF SUPPLY CHAIN SIMULATOR APPLICATION USING TECHNOLOGY ACCEPTANCE MODEL

    Directory of Open Access Journals (Sweden)

    Mulyati E.

    2018-03-01

    Full Text Available The aim of this research for was to measure the user acceptance of simulator application which was built as a tool for student in learning of supply chain, particularly in bullwhip effect problem. The measurements used for the acceptance of supply chain simulator application in this research was the Technology Acceptance Model from 162 samples which were analyzed with Confirmatory Factor Analysis and Structural Equation Modelling. The result of this research indicated that the user acceptance (shown by customer participation of supply chain simulator was directly influence by perceived usefulness of supply chain simulator application used (positive and significant; the user acceptance of supply chain simulator was indirectly influenced by perceived ease of use in using supply chain simulator application (positive but not significant; the user acceptance of supply chain simulator was indirectly influenced by perceived enjoyment when the supply chain simulator application was used. The research would give a better understanding about a bullwhip effect and better experience for students, which would not be obtained through conventional learning, when the tools were not used.

  11. Zone of Acceptance Under Performance Measurement: Does Performance Information Affect Employee Acceptance of Management Authority?

    DEFF Research Database (Denmark)

    Nielsen, Poul Aaes; Jacobsen, Christian Bøtcher

    2018-01-01

    Public sector employees have traditionally enjoyed substantial influence and bargaining power in organizational decision making, but few studies have investigated the formation of employee acceptance of management authority. Drawing on the ‘romance of leadership’ perspective, we argue that perfor......Public sector employees have traditionally enjoyed substantial influence and bargaining power in organizational decision making, but few studies have investigated the formation of employee acceptance of management authority. Drawing on the ‘romance of leadership’ perspective, we argue...... that performance information shapes employee attributions of leader quality and perceptions of a need for change in ways that affect their acceptance of management authority, conceptualized using Simon’s notion of a ‘zone of acceptance.’ We conducted a survey experiment among 1,740 teachers, randomly assigning...... true performance information about each respondent’s own school. When employees were exposed to signals showing low or high performance, their acceptance of management authority increased, whereas average performance signals reduced employee acceptance of management authority. The findings suggest...

  12. A Method to Improve the Software Acceptance Criteria for Nuclear Power Plants

    International Nuclear Information System (INIS)

    Suh, Yong Suk; Park, Heui Youn; Son, Ki Sung; Lee, Ki Hyun; Kim, Hyeon Soo

    2005-01-01

    The license is a mandatory process required by a governmental authority and the certification is a voluntary process administrated by a professional community. A software certification is a result of an assessment that the certified software conforms to required criteria or standards. The certification is used as a committed promise to produce a high quality software, so software acquirers are requiring it from their suppliers. For example, US DoD (Department of Defense) requires an achievement of CMMI-SW (Capability Maturity Model Integration-Software) certification for participating in a major military software project. It is commonly said that the purpose of achieving a certification is to improve the product quality. In the nuclear area, a software certification has been rarely concerned with or required for the software used in a safety function of NPPs (Nuclear Power Plants). The safety critical software for NPPs is accepted by the nuclear regulators when the following three criteria are met: acceptable plans should be prepared to control the software development activities, the plans should be followed in an acceptable software life cycle, and the process should produce acceptable design outputs. The acceptance criteria are so abstractive that the nuclear regulators may assess the software development plans, activities, outputs based on their subjective engineering judgments. This is inevitable because a software has invisible or intangible characteristics. It is hard to assess the totality of a software prior to running it. These have caused the judgments to be biased. The regulators may want some objectiveness in assessing how much capability for software development the supplier possesses. In that case, the software certification can assist them for such an assessment. This paper proposes a method to improve the software acceptance criteria by applying the software certification to the criteria. This will assist the regulators to assess the supplier

  13. Harz/Vesper: Acceptance Research with Logical Relations and Pragma-Dialectics

    Science.gov (United States)

    Harz, M.

    2012-04-01

    We use two different theories for our research on the acceptance of carbon capture and storage (CCS), geothermal energy and shale gas: logical relations and pragma-dialectics. With the theory of logical relations we can describe the structure of the terminus "acceptance" as a three-place or more relationship. We use the Newtonian binominal coefficients order to reflect on the complexity of the concept of acceptance. We are exploring relations between citizens, politicians, scientists, businesses and technologies. The technological-philosophical reflection on the topic "Determinants for acceptance of new technologies" concerns the issues of "Trust", "Security" as well as "Interest and Use" as the essential constituents of acceptance. Trust: Politicians, scientists and entrepreneurs need to understand themselves as advocates of acceptance. Acceptance is not automatic but requires a great effort and continuous personal commitment, as you want to secure acceptance not only for the short-term but for the long-term. The confidence curve follows a hysteresis loop as known from the magnetization of materials: It requires a significant effort. If the existing trust is lost due to erroneous communication or incorrect political action, the restoration effort is significantly greater. Citizens need to understand themselves as being asked for acceptance and as actively influencing the shapes of their life. They may not feel as victims or sufferers from technological developments but should have a realistic feeling of being able to influence - in fact - anything. "Openness creates openness." (H.-J. Bullinger) Security: The advocate promoting acceptance must take into account the security needs of the citizens with regard to the technologies which are supposed to be accepted. Even irrational fears are actual fears that can prevent acceptance. Interests and Goals of Usage: The advocate promoting acceptance must - sincerely and publicly - express his interest in the use and goals

  14. Neutron absorber qualification and acceptance testing from the designer's perspective

    Energy Technology Data Exchange (ETDEWEB)

    Bracey, W. [Transnuclear, Inc, Hawthorne, NY (United States); Chiocca, R. [Cogema Logistics, St. Quentin en Yvelines (France)

    2004-07-01

    Starting in the mid 1990's, the USNRC began to require less than 100% credit for the 10B present in fixed neutron absorbers spent fuel transport packages. The current practice in the US is to use only 75% of the specified 10B in criticality safety calculations unless extensive acceptance testing demonstrates both the presence of the 10B and uniformity of its distribution. In practice, the NRC has accepted no more than 90% credit for 10B in recent years, while other national competent authorities continue to accept 100%. More recently, with the introduction of new neutron absorber materials, particularly aluminum / boron carbide metal matrix composites, the NRC has also expressed expectations for qualification testing, based in large part on Transnuclear's successful application to use a new composite material in the TN-68 storage / transport cask. The difficulty is that adding more boron than is really necessary to a metal has some negative effects on the material, reducing the ductility and the thermal conductivity, and increasing the cost. Excessive testing requirements can have the undesired effect of keeping superior materials out of spent fuel package designs, without a corresponding justification based on public safety. In European countries and especially in France, 100% credit has been accepted up to now with materials controls specified in the Safety Analysis Report (SAR): Manufacturing process approved by qualification testing Materials manufacturing controlled under a Quality Assurance system. During fabrication, acceptance testing directly on products or on representative samples. Acceptance criteria taking into account a statistical uncertainty corresponding to 3{sigma}. The original and current bases for the reduced {sup 10}B credit, the design requirements for neutron absorber materials, and the experience of Transnuclear and Cogema Logistics with neutron absorber testing are examined. Guidelines for qualification and acceptance testing and

  15. Effect of the Fukushima nuclear disaster on global public acceptance of nuclear energy

    International Nuclear Information System (INIS)

    Kim, Younghwan; Kim, Minki; Kim, Wonjoon

    2013-01-01

    The Fukushima nuclear disaster has significantly changed public attitudes toward nuclear energy. It is important to understand how this change has occurred in different countries before the global community revises existing nuclear policies. This study examines the effect of the Fukushima disaster on public acceptance of nuclear energy in 42 countries. We find that the operational experience of nuclear power generation which has significantly affected positive public opinion about nuclear energy became considerably negative after the disaster, suggesting fundamental changes in public acceptance regardless of the level of acceptance before the disaster. In addition, contrary to our expectation, the proportion of nuclear power generation is positively and significantly related to public acceptance of nuclear energy after the Fukushima accident and government pressure on media content led to a greater decrease in the level of public acceptance after the accident. Nuclear energy policymakers should consider the varied factors affecting public acceptance of nuclear energy in each country depending on its historical, environmental, and geographical circumstances before they revise nuclear policy in response to the Fukushima accident. - Highlights: • Fukushima accident has negatively changed public attitudes toward nuclear energy. • Effect of operational experience became considerably negative after the accident. • Effect of proportion of nuclear power generation is positive after the accident. • Effect of government pressure on media content became negative after the accident. • Country specific policy responses on nuclear public acceptance are required

  16. Nevada Test Site Waste Acceptance Criteria (NTSWAC), Rev. 7-01

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2009-05-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NTSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex for disposal.

  17. Nevada Test Site Waste Acceptance Criteria (NTSWAC), Rev. 7-01

    International Nuclear Information System (INIS)

    2009-01-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NTSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex for disposal.

  18. Closure requirements

    International Nuclear Information System (INIS)

    Hutchinson, I.P.G.; Ellison, R.D.

    1992-01-01

    Closure of a waste management unit can be either permanent or temporary. Permanent closure may be due to: economic factors which make it uneconomical to mine the remaining minerals; depletion of mineral resources; physical site constraints that preclude further mining and beneficiation; environmental, regulatory or other requirements that make it uneconomical to continue to develop the resources. Temporary closure can occur for a period of several months to several years, and may be caused by factors such as: periods of high rainfall or snowfall which prevent mining and waste disposal; economic circumstances which temporarily make it uneconomical to mine the target mineral; labor problems requiring a cessation of operations for a period of time; construction activities that are required to upgrade project components such as the process facilities and waste management units; and mine or process plant failures that require extensive repairs. Permanent closure of a mine waste management unit involves the provision of durable surface containment features to protect the waters of the State in the long-term. Temporary closure may involve activities that range from ongoing maintenance of the existing facilities to the installation of several permanent closure features in order to reduce ongoing maintenance. This paper deals with the permanent closure features

  19. Public acceptance of nuclear energy in Mexico

    International Nuclear Information System (INIS)

    Alonso, Gustavo; Ramirez, Ramon; Palacios, Javier; Gomez, Armando

    2008-01-01

    One of the main constraints to adopt a nuclear program is the public acceptance. In Mexico, at least, it lacks of an adequate promotion of its benefits and challenges. A big stigma for nuclear electricity production is the association with nuclear weapons, along with myths and misconceptions and bad information about nuclear energy. Mexico has adopted an energy policy to diversify the electricity sources and nuclear energy is among the alternatives to achieve this goal because current studies show that is a safe and a competitive option from an economical point of view. Public opinion plays a very important role in the policy decision making to adopt the deployment of new reactor units; therefore it is necessary to define communication strategies to promote nuclear energy. The current study is an investigation to learn what is the perception and positioning about nuclear energy as a starting point to define the way to improve public acceptance. The national assessment carry on here is divided in two parts, the first one is a qualitative study to know knowledge level, associations and nuclear perception, identifying controversy items and expectations about advantages and disadvantages to define the adequate question to be used in the second part, which is a quantitative study that shows the acceptance of nuclear energy at national level and in particular in two sites that are suitable to deploy new nuclear reactors. From the results of this study some communication and persuasion strategies to improve public perception are defined and they could be used as part of a nuclear program. (author)

  20. Acceptance model of a Hospital Information System.

    Science.gov (United States)

    Handayani, P W; Hidayanto, A N; Pinem, A A; Hapsari, I C; Sandhyaduhita, P I; Budi, I

    2017-03-01

    The purpose of this study is to develop a model of Hospital Information System (HIS) user acceptance focusing on human, technological, and organizational characteristics for supporting government eHealth programs. This model was then tested to see which hospital type in Indonesia would benefit from the model to resolve problems related to HIS user acceptance. This study used qualitative and quantitative approaches with case studies at four privately owned hospitals and three government-owned hospitals, which are general hospitals in Indonesia. The respondents involved in this study are low-level and mid-level hospital management officers, doctors, nurses, and administrative staff who work at medical record, inpatient, outpatient, emergency, pharmacy, and information technology units. Data was processed using Structural Equation Modeling (SEM) and AMOS 21.0. The study concludes that non-technological factors, such as human characteristics (i.e. compatibility, information security expectancy, and self-efficacy), and organizational characteristics (i.e. management support, facilitating conditions, and user involvement) which have level of significance of p<0.05, significantly influenced users' opinions of both the ease of use and the benefits of the HIS. This study found that different factors may affect the acceptance of each user in each type of hospital regarding the use of HIS. Finally, this model is best suited for government-owned hospitals. Based on the results of this study, hospital management and IT developers should have more understanding on the non-technological factors to better plan for HIS implementation. Support from management is critical to the sustainability of HIS implementation to ensure HIS is easy to use and provides benefits to the users as well as hospitals. Finally, this study could assist hospital management and IT developers, as well as researchers, to understand the obstacles faced by hospitals in implementing HIS. Copyright © 2016

  1. Achieving public acceptance. Lessons from national repository programs

    International Nuclear Information System (INIS)

    Isaacs, Tom

    2008-01-01

    Essentially all countries pursuing nuclear waste repository programs have had long and dynamic histories. There have had changes in policies, programs, and national laws, many successes and more failures. Most continue to pursue the siting and development of geologic repositories for the ultimate disposal of the spent nuclear fuel (or reprocessed wastes) arising from the operation of nuclear power plants. And while many have had very strong repository science and technology programs, they have continued to find significant challenges associated with the societal acceptance issues required for such programs to be successful. Over recent years repository programs have developed and implemented rather different approaches to managing the non-technical (e.g. societal, political, and institutional) aspects of repository program development. This is not unexpected as programs have had different histories, operate under different laws, reside in countries with different cultures and values, and are managed under different formulations. For example, the U.S. program is implemented by a branch of the Department of Energy while in several other countries the program is managed by a separate corporation on behalf of the nuclear waste owners or dedicated quasi-governmental organizations. These similar, but different programs, and their rich histories and current work, provide an excellent opportunity to investigate features that have and have not proven successful in helping to achieve public acceptance. This paper will review some of the compelling aspects and provide some guidelines for applications in other national circumstances. Recent experiences will be evaluated to discern emerging trends for achieving public acceptance in nuclear repository development and in the broader dimensions associated with the potential renaissance of nuclear power. (author)

  2. Acceptability of Weaning Mixes from Locally Available Foods

    International Nuclear Information System (INIS)

    Thwin, Theingi

    2014-01-01

    Full text: Two types of legume-based (lentils/chickpea) and two types of fish-based (carp/catfish) formulas have been made in the form of dry powder, from locally available foods. By analysis of the nutrient composition of formulas, the lentil formula provides 410 calories (11.7g of protein), chickpea formula (418 calories, 13.5g of protein), catfish formula (428 calories, 16.1g of protein) and carp formula (432 calories, 15.8g of protein) in 100g dry weight of each formula. All the formulas were adequate in protein and energy density to meet the WHO recommended value for nutrition needs of 6-12 months old infants. The results of bacteriological analyses showed all the samples were within the recommended microbiological limits for dried products requiring preparation with boiling water. No physical changes were observed when the formulas were stored in sealed plastic bags at room temperature for 6 months. Developed products were evaluated for their acceptability by a panel of 20 persons using 4-point Hedonic Rating Scale. Results from sensory analysis showed that catfish formula obtained highest score for its color, lentil formula for its aroma and taste, and the lowest to carp formula. In the acceptability trials done on 25 children, 82%-90% of the mothers reported that the mixes were acceptable to their children. No adverse side effects were noticed. More than half of the mothers reported their children refused to eat other family foods and showed an obvious preference for the mixes, especially the one made by lentil. (author)

  3. Derivation of the acceptance and self-worth adjustment scale.

    Science.gov (United States)

    Tabrett, Daryl R; Latham, Keziah

    2010-11-01

    The original 55-item Nottingham Adjustment Scale (NAS) is a first generation self-report instrument constructed using classical test theory to evaluate adjustment to vision loss. This study assesses the function of the NAS using Rasch analysis in a sample of adults with visual impairment and presents a revised second-generation instrument. Ninety-nine subjects with established vision loss (median onset 5 years) were administered the NAS. Rasch analysis was performed to: (1) determine optimum response scale function, (2) aid item reduction, (3) determine reliability indices and item targeting, (4) assess unidimensionality using Rasch-based principal component analysis, (5) assess differential item functioning (notable defined as >1.0 logit), and (6) formulate person measures to correlate with Geriatric Depression Scale scores and distance visual acuity to indicate convergent and discriminant validity, respectively. Response categories exhibited underutilization, which when repaired improved response scale functioning and ordered structural calibrations. Misfitting items were removed iteratively until all items had mean-square infit and outfit values of 0.70 to 1.30. However, principal component analysis confirmed insufficient unidimensionality (two contrasts identified, eigenvalues 2.4 and 2.3). Removal of these contrasts and two further iterations restored unidimensionality. Despite item mistargeting (1.58 logits), the revised 19-item instrument demonstrated good person (0.85) and item (0.96) reliability coefficients, good convergent and discriminant validity, and no systematic differential item functioning. The resultant 19-item instrument was termed the Acceptance and Self-Worth Adjustment Scale (AS-WAS). In those with established vision loss, the 19-item Acceptance and Self-Worth Adjustment Scale is a reliable and valid instrument that estimates the level of adjustment concerned with acceptance, attitudes, self-esteem, self-efficacy, and locus of control. An

  4. Hierarchical analysis of acceptable use policies

    Directory of Open Access Journals (Sweden)

    P. A. Laughton

    2008-01-01

    Full Text Available Acceptable use policies (AUPs are vital tools for organizations to protect themselves and their employees from misuse of computer facilities provided. A well structured, thorough AUP is essential for any organization. It is impossible for an effective AUP to deal with every clause and remain readable. For this reason, some sections of an AUP carry more weight than others, denoting importance. The methodology used to develop the hierarchical analysis is a literature review, where various sources were consulted. This hierarchical approach to AUP analysis attempts to highlight important sections and clauses dealt with in an AUP. The emphasis of the hierarchal analysis is to prioritize the objectives of an AUP.

  5. A full acceptance detector at the LHC

    International Nuclear Information System (INIS)

    Avati, V.; Eggert, K.; Taylor, C.

    1999-01-01

    The FELIX collaboration has proposed the construction of a full acceptance detector for the LHC, to be located at Intersection Region 4, and to be commissioned concurrently with the LHC. The primary mission of FELIX is QCD: to provide comprehensive and definitive observations of a very broad range of strong-interaction processes. This paper reviews the detector concept and performance characteristics, the physics menu, and plans for integration of FELIX into the collider lattice and physical environment. The current status of the FELIX Letter of Intent is discussed

  6. ESTEEM manual. Deliverable 5 of Create Acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Jolivet, E. [IAE, Toulouse (France); Mourik, R.; Raven, R.P.J.M.; Feenstra, C.F.J. [ECN Policy Studies, Petten (Netherlands); Alcantud Torrent, A.; Schaefer, B. [EcoInstitute, Barcelona (Spain); Heiskanen, E. [National Consumer Research Centre NCRC, Helsinki (Finland); Hodson, M. [Centre for Sustainable Urban and Regional Futures SURF, Manchester (United Kingdom); Oniszk-Poplawska, A. [Institute for Renewable Energy IEO, Warszawa (Poland); Difiore, M.; Fucsko, J. [Hungarian Environmental Economics Center MAKK, Budapest (Hungary); Maack, M.H. [Icelandic New Energy INE, Reykjavik (Iceland); Poti, B.M. [CERIS-CNR, Rome (Italy); Prasad, G. [University of Cape Town UCT, Capetown (South Africa); Brohmann, B.; Fritsche, U.R.; Huenecke, K. [OEKO Institut, Freiburg (Germany)

    2008-05-15

    The ESTEEM tool is one of the outcomes of Create Acceptance. ESTEEM (Engage stake-holders through a systematic toolbox to manage new energy projects) is a six step tool which is performed by a consultant in close cooperation with the project manager of a new energy project. The focus of the tool is put on the early recognition and discussion of stakeholders expectations and the integration of these in the design of the project. ESTEEM, including background information is freely available via www.esteem-tool.eu.

  7. Pickering education centre aids nuclear acceptance

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Activities at the new education centre at Pickering are described. The opening of the Nuclear Communications Centre, in 1978, resulting from a search for an effective means of maintaining public acceptance of Ontario Hydro's extensive nuclear power programme. Activities include participation in the interactive computer games, guided tours of educational exhibits including a model of Pickering A generating station, and displays depicting the Candu fuel cycle, outdoor exhibits of renewable energy sources, and tours of the plant. Outside activities include lectures to schools and citizen, business, or professional groups. (U.K.)

  8. Large acceptance spectrometers for π0 mesons

    International Nuclear Information System (INIS)

    Awes, T.C.; Ferguson, R.L.; Obenshain, F.E.

    1984-01-01

    A spectrometer composed of lead-oxide loaded glass blocks has been constructed for detection of neutral pi mesons emitted in low energy heavy ion reactions. The spectrometer detects the Cerenkov radiation emitted when the high energy photons (Eγ approx. 70 MeV) resulting from π 0 decay create electron-position pairs in the glass, initiating electromagnetic showers. A geometric acceptance of better than 5% of 4π is possible; the π 0 detection efficiency varies between this value at T/sub π/ = 0 MeV and 1% for T/sub π/ approx. 100 MeV

  9. Determinants of human papillomavirus vaccine acceptability in Latin America and the Caribbean.

    Science.gov (United States)

    Winkler, Jennifer L; Wittet, Scott; Bartolini, Rosario M; Creed-Kanashiro, Hilary M; Lazcano-Ponce, Eduardo; Lewis-Bell, Karen; Lewis, Merle J; Penny, Mary E

    2008-08-19

    Prophylactic human papillomavirus (HPV) vaccines provide promise as a key component of future cervical cancer prevention programs in the Latin America and the Caribbean region. The successful introduction and acceptance of these vaccines will depend on a range of factors including awareness of cervical cancer as a problem, affordability of the vaccine, political will, competition with other vaccines, feasibility of vaccine delivery and acceptability of the vaccine among the range of groups who will influence uptake. While existing data about acceptability from Latin America and the Caribbean is scarce, it is clear that health policymakers, providers and the general public lack knowledge about HPV and cervical cancer. Furthermore, they would value more local epidemiologic data related to cervical cancer. Price is currently a major barrier to vaccine acceptability and a priority for advocacy. More research is required in Latin America and the Caribbean to determine what messages and strategies will work in these communities.

  10. Impact of Collaborative Work on Technology Acceptance: A Case Study from Virtual Computing

    Directory of Open Access Journals (Sweden)

    Abdullah Konak

    2016-12-01

    Findings\tThe findings of the study supported that collaborative work could improve non-technology students’ acceptance of RVCLs. However, no significant effect of collaborative work on technology acceptance was observed in the case of technology students. Recommendations for Practitioners\tEducators should consider the benefits of collaborative work while introducing a new technology to students who may not have background in the technology introduced. Recommendation for Researchers In this study, student technological background was found to be a significant factor for technology acceptance; hence, it is recommended that technological background is included in TAM studies as an external factor. Future Research\tRepeating similar studies with multiple exercises with varying degrees of challenge is required for a better understanding of how collaborative work and student technological background affect technology acceptance.

  11. The Northern Regional Programme for the acceptance testing of X-ray equipment

    International Nuclear Information System (INIS)

    Faulkner, K.; Harrison, R.M.; Kotre, C.J.; Smith, S.; Davies, M.; Barker, P.

    1989-01-01

    Since 1984 the Regional Medical Physics Department has participated in a regional acceptance testing programme for all X-ray equipment from mobile units to computed tomography scanners. The organizational and radiation physics aspects of the programme are described. Three levels of tests are performed by physicists: the first on installation, the second after 3 months, and the final visit just prior to the end of the manufacturer's warranty. The second test is only performed if any aspect of performance requires rechecking as a result of the first visit. Acceptance test protocols are based on those published by the Institute of Physical Sciences in Medicine. Details of the limiting values for the acceptance test measurements are given. The results of the programme are discussed. In some instances the testing has resulted in modifications to the design and construction of X-ray equipment. Acceptance testing is important in determining a baseline standard of performance against which routine quality assurance may be assessed. (author)

  12. The Northern regional programme for the acceptance testing of X-ray equipment

    International Nuclear Information System (INIS)

    Faulkner, K.; Harrison, R.M.; Kotre, C.J.; Smith, S.; Davies, M.; Barker, P.

    1989-01-01

    Since 1984 the UK Northern Regional Medical Physics Department has participated in a regional acceptance testing programme for all X-ray equipment from mobile units to computed tomography scanners. Organizational and radiation physics aspects of the programme are described. Three levels of tests are performed by physicists: the first on installation, the second after 3 months, the final visit just prior to the end of the manufacturers warranty. The second test is only performed if any aspect of performance requires rechecking as a result of the first. Acceptance test protocols are based on those published by the Institute of Physical Sciences in Medicine. Details limiting values for the acceptance test measurements are given. In some instances testing has resulted in modifications to the design and construction of X-ray equipment. Acceptance testing is important in determining a baseline standard of performance against which routine quality assurance may be assessed. (author)

  13. Acceptance/Operational Test Report for Tank 241-AN-104 camera and camera purge control system

    International Nuclear Information System (INIS)

    Castleberry, J.L.

    1995-11-01

    This Acceptance/Operational Test Procedure (ATP/OTP) will document the satisfactory operation of the camera purge panel, purge control panel, color camera system and associated control components destined for installation. The final acceptance of the complete system will be performed in the field. The purge panel and purge control panel will be tested for its safety interlock which shuts down the camera and pan-and-tilt inside the tank vapor space during loss of purge pressure and that the correct purge volume exchanges are performed as required by NFPA 496. This procedure is separated into seven sections. This Acceptance/Operational Test Report documents the successful acceptance and operability testing of the 241-AN-104 camera system and camera purge control system

  14. Studying RFID Consumer Acceptance Using TAM: the Case of IUST Students

    Directory of Open Access Journals (Sweden)

    Ahad Zare Ravasan

    2012-02-01

    Full Text Available Radio frequency identification (RFID technology is used in numerous applications and offers a plethora of interesting potential new applications. However, this potential raises issues that require addressing to achieve its widespread acceptance by consumers. This paper investigated the factors that affect consumer acceptance of RFID technology using the technology acceptance model (TAM. To this end, a questionnaire was prepared and distributed among Iran University of Science and Technology (IUST students and gathered data were analyzed using multivariable linear regression method. The results proposed that convenience, culture, and regulation were the principal factors influencing the consumers’ acceptance of RFID. The results of the paper can provide insight to organizations in providing RFID enabled products to their customers and also facilitated its development in the society.

  15. An international comparative analysis of public acceptance of nuclear energy

    International Nuclear Information System (INIS)

    Kim, Younghwan; Kim, Wonjoon; Kim, Minki

    2014-01-01

    Across the globe, public acceptance of nuclear power is a crucial factor for governmental establishment of a nuclear energy program. Therefore, it is important to understand the determinants of public acceptance of nuclear power. This study examines the effects of knowledge, trust, risk, and benefit related factors on public acceptance of nuclear power across 19 countries. We consider three levels of public acceptance – strongly accept, reluctantly accept, and oppose – and classify countries into four groups according to the ratio of those three levels of public acceptance. Our results indicate that knowledge of nuclear inspection is more effective than trust in inspection authorities in creating stronger public acceptance among people in the countries with a high level of reluctant acceptance and a low level of strong acceptance, while trust in inspection authorities is more important than knowledge of nuclear inspection for the selection between opposition and reluctant acceptance in countries with a low level of reluctant acceptance and a high level of strong acceptance. Without grouping the countries, we found that trust in inspection authorities is crucial for the decision between opposition and reluctant acceptance. Additionally, the generation of electricity has the most positive effect on public acceptance of nuclear power. - Highlights: • We examine public acceptance (PA) of nuclear power across 19 countries. • Three levels of PA – strongly accept, reluctantly accept, and oppose – are considered. • Knowledge is most effective in creating stronger PA. • Trust is effective in shifting PA from opposition to reluctant acceptance. • Low risk and benefit of electricity generation enhance PA the most

  16. Electrothermal debracketing: patient acceptance and effects on the dental pulp.

    Science.gov (United States)

    Dovgan, J S; Walton, R E; Bishara, S E

    1995-09-01

    Adhesives bond ceramic brackets so effectively that their removal by mechanical forces can fracture the brackets and may damage the tooth surface. Electrothermal debracketers have been developed to facilitate removal; whether the heat generated will damage the underlying pulp is unclear. In our experiment, a prototype device with a high heat tip was used to remove brackets from premolars in patients. The following parameters were evaluated: (1) time required for removal, (2) patient acceptance, and (3) histologic effect on the pulp. Forty-eight experimental teeth planned for orthodontic extraction were bonded by a filled Bis-GMA composite resin and a monocrystalline sapphire bracket. After the chemically cured composite set, debracketing was performed according to the manufacturer's recommendations. Seventeen premolars were not etched or bracketed and served as controls. The interval between heat application and removal of the bracket was timed. Patients were questioned as to sensations during debracketing. Teeth were extracted at 5 to 7 or 28 to 32 days and histologically prepared. Pulps were evaluated for alterations. Brackets were removed in an average of 2.1 seconds, usually at the bracket/composite interface. Patient acceptance was generally positive. Pulpal necrosis was not observed but, in a number of specimens, slight inflammation and odontoblastic disruption occurred at both observation periods.

  17. Considerations in the public acceptance of sewage sludge irradiation systems

    International Nuclear Information System (INIS)

    Dix, G.P.

    1975-01-01

    Considerations associated with public acceptance of municipal sewage sludge irradiation systems are discussed including the benefit to society, public information and safeguards. Public acceptance of products is based upon the benefit to society as measured by reduced consumer costs, minimization of public risk and enhancement of the quality of life and the environment. When viewed in this positive light, the sludge irradiator has high potential benefits to the community. If large-scale engineering experiments show that sludge irradiation is more cost-effective than other methods, reduced consumer costs would result. Today many sewage plants do not consistently remove pathogens from sludge; sludge irradiation could be an effective method of pathogen removal and result in avoidance of a major public risk. The sludge irradiator may be able to clean up recreational areas, reduce noxious odours from sewage treatment facilities, and reduce the energy requirements for producing fertilizer and soil conditioners and conserve their mineral content. Plant safeguards must be explained to dispel public concern that the contents of the source can be released to the sludge accidentally. This will be the main issue within the technical sector of the public, and the design, procedural and administrative safeguards of the plant must be fully explained. The primary risk associated with sludge irradiators will be the remote possibility of source leakage into the sludge. The various safeguards in sludge irradiation plants are discussed in detail including the form of the radionuclide, encapsulation, the irradiation chamber, safeguards instrumentation, shielding and thermal safeguards. (Author)

  18. Topographical mapping system for radiological and hazardous environments acceptance testing

    International Nuclear Information System (INIS)

    Armstrong, G.A.; Dochat, G.R.

    1997-01-01

    During the summer of 1996, the Topographical Mapping System (TMS) for hazardous and radiological environments and its accompanying three-dimensional (3-D) visualization tool, the Interactive Computer-Enhanced Remote-Viewing System (ICERVS), were delivered to Oak Ridge National Laboratory (ORNL). ORNL and Mechanical Technology, Inc., performed final acceptance testing of the TMS during the next eight months. The TMS was calibrated and characterized during this period. This paper covers the calibration, characterization, and acceptance testing of the TMS. Development of the TMS and ICERVS was initiated by the US Department of Energy (DOE) for the purpose of characterization and remediation of underground storage tanks (USTs) at DOE sites across the country. DOE required a 3-D, topographical mapping system suitable for use in hazardous and radiological environments. The intended application is the mapping of the interior of USTs as part of DOE's waste characterization and remediation efforts and to obtain baseline data on the content of the storage tank interiors as well as data on changes in the tank contents and levels brought about by waste remediation steps. Initially targeted for deployment at the Hanford Washington site, the TMS is designed to be a self-contained, compact, and reconfigurable system that is capable of providing rapid, variable-resolution mapping information in poorly characterized workspaces with a minimum of operator intervention

  19. Synthetic seismic acceleration time-histories and their acceptance criteria

    International Nuclear Information System (INIS)

    Xu Hong

    1996-01-01

    In seismic dynamic response analysis of structures and equipment, time-history analysis is now widely used. The 3-D seismic acceleration time-histories or 3-D seismic displacement time-histories are required in the 3-D seismic dynamic response analysis as the seismic excitation input data. Because of the lack of actual acceleration time-histories for the field where the structures or equipment are installed, the general practice is to use the synthetic seismic acceleration time-histories, which are derived from the design seismic response spectra of the field, as the seismic excitation input data. However, from one specified design response spectrum indefinite solutions of acceleration time-histories can be derived depending on the values of the input parameters. Not all the derived synthetic time-histories can be used as seismic excitation input data. Only those which meet the acceptance criteria can be used. The factors (input parameters), which will affect the time-history solution from a specified seismic response spectrum, and the acceptance criteria are discussed

  20. Topographical mapping system for radiological and hazardous environments acceptance testing

    Science.gov (United States)

    Armstrong, Gary A.; Dochat, G. R.

    1997-09-01

    During the summer of 1996, the topographical mapping system (TMS) for hazardous and radiological environments and its accompanying three-dimensional (3-D) visualization tool, the interactive computer-enhanced remote-viewing system (ICERVS), were delivered to Oak Ridge National Laboratory (ORNL). ORNL and Mechanical Technology, Inc., performed final acceptance testing of the TMS during the next eight months. The TMS was calibrated and characterized during this period. This paper covers the calibration, characterization, and acceptance testing of the TMS. Development of the TMS and the ICERVS was initiated by the U.S. Department of Energy (DOE) for the purpose of characterization and remediation of underground storage tanks (USTs) at DOE sites across the country. DOE required a 3-D, topographical mapping system suitable for use in hazardous and radiological environments. The intended application is the mapping of the interior of USTs as part of DOE's waste characterization and remediation efforts and to obtain baseline data on the content of the storage tank interiors as well as data on changes in the tank contents and levels brought about by waste remediation steps. Initially targeted for deployment at the Hanford Washington site, the TMS is designed to be a self-contained, compact, reconfigurable system that is capable of providing rapid, variable-resolution mapping information in poorly characterized workspaces with a minimum of operator intervention.

  1. Acceptance test report for 241-AW process air system

    International Nuclear Information System (INIS)

    Kostelnik, A.J.

    1994-01-01

    The acceptance test procedure (ATP) for the compressed air system at building 241-AW-273 was completed on March 11, 1993. The system was upgraded to provide a reliable source of compressed air to the tank farm. The upgrade included the demolition of the existing air compressor and associated piping, as well as the installation of a new air compressor with a closed loop cooling system. A compressed air cross-tie was added to allow the process air compressor to function as a back-up to the existing instrument air compressor. The purpose of the ATP was to achieve three primary objectives: verify system upgrade in accordance with the design media; provide functional test of system components and controls; and prepare the system for the Operational Test. The ATP was successfully completed with thirteen exceptions, which were resolved prior to completing the acceptance test. The repaired exceptions had no impact to safety or the environment and are briefly summarized. Testing ensured that the system was installed per design, that its components function as required and that it is ready for operational testing and subsequent turnover to operations

  2. Acceptance test for 900 MWe PWR unit replacement steam generators

    International Nuclear Information System (INIS)

    Gourguechon, B.

    1993-01-01

    During the first half of 1994, the Gravelines 1 steam generators will be replaced (SG replacement procedure). The new SG's differ from the former components notably by the alloy used for the tube bundle, in this case, the high chromium content Inconel 690. So, from this standpoint, they are to be considered as PWR 900 replacement SG first models and their thermal efficiency has consequently to be assessed. This will provide an opportunity of ensuring that the performance of the components delivered is in compliance with requirements and of making the necessary provisions if significant deviations are observed. The EFMT branch, which has been in charge of the instrumentation and acceptance of the different SG first models since the first PWR plants were commissioned, will be responsible for the acceptance tests and the ultimate validation of a performance assessment procedure applicable to the future replacement steam generators. The methods and tests proposed for SG expert appraisal are based on consideration of the importance of primary measurement quality for satisfactory SG assessment and of the new test facilities with which the 900 and 1 300 PWR plants are gradually being equipped. These facilities provide an on-site computer environment for tests compatible with the tools (PATTERN, etc.) used at EFMT and in other departments. This test is the first of this kind performed by EFMT and the test facility of a nuclear power plant. (author). 6 figs

  3. PVUSA procurement, acceptance, and rating practices for photovoltaic power plants

    Energy Technology Data Exchange (ETDEWEB)

    Dows, R.N.; Gough, E.J.

    1995-09-01

    This report is one in a series of PVUSA reports on PVUSA experiences and lessons learned at the demonstration sites in Davis and Kerman, California, and from participating utility host sites. During the course of approximately 7 years (1988--1994), 10 PV systems have been installed ranging from 20 kW to 500 kW. Six 20-kW emerging module technology arrays, five on universal project-provided structures and one turnkey concentrator, and four turnkey utility-scale systems (200 to 500 kW) were installed. PVUSA took a very proactive approach in the procurement of these systems. In the absence of established procurement documents, the project team developed a comprehensive set of technical and commercial documents. These have been updated with each successive procurement. Working closely with vendors after the award in a two-way exchange provided designs better suited for utility applications. This report discusses the PVUSA procurement process through testing and acceptance, and rating of PV turnkey systems. Special emphasis is placed on the acceptance testing and rating methodology which completes the procurement process by verifying that PV systems meet contract requirements. Lessons learned and recommendations are provided based on PVUSA experience.

  4. Acceptance, commissioning and quality control in radiosurgery

    International Nuclear Information System (INIS)

    Toreti, Dalila Luzia

    2009-01-01

    Stereotactic Radiosurgery is a treatment technique that uses narrow beams of radiation focused with great accuracy in a small lesion. The introduction of micro multi leaf collimators (mMLC) allows this technique to reach a higher degree of dose conformation of the target lesion allowing a smaller irradiation of critical structures and normal tissues. This paper presents the results of the acceptance tests and commissioning of a Varian 6EX linear accelerator dedicated to radiosurgery associated with the BrainLab micro multi leaf collimator installed in the Hospital das Clinicas da Faculdade de Medicina da USP (HC-FMUSP) and establish feasible quality assurance program for the services that employ this special technique. The results of the acceptance tests were satisfactory and are willing with the specifications provided by the manufacturer and the commissioning tests were within the international recommendations. The tests and measures that are part of quality control process should be specific to each treatment unit, and the need, frequency and levels of tolerance

  5. Acceptability of Contraceptives in Young Couples

    Institute of Scientific and Technical Information of China (English)

    楼超华; 郭友宁

    1997-01-01

    Based on the data from the survey of 7826 young couples in two districts of Shanghai, we analyzed the acceptability of oral pill, IUD, condom and injection in women. The results showed that 63.4% of subjects were unwilling to use pill and 5.7% were unwilling to use injection, mainly for the reasons that the pill was “harmful tohealth” and the “cause of obesity”; 8.7% of subjects were unwilling to use IUD, mainly for the reasons of the “cause of menorrhagia or spotting” and“being easy to fail”; 6.2% of subjects were unwilling to use condom, mainly for the reasons of “interference with intercourse” and “inconvenience in use”. The most important source of getting the information was “heard from person's talking”.Simple variate and Logistic analysis showed that women's age at marriage, education, occupation, contraceptive knowledge score, history of using the contraceptives,some women's traits etc. affected the acceptability of the contraceptives. The study implies that it is necessary to strengthen provision of contraceptive knowledge for young couples and to make them have correct understanding of the side effects of contraceptives for improving family planning program.

  6. Assesing the acceptance of the project

    Directory of Open Access Journals (Sweden)

    Clara Fernández-Shaw Toda

    2009-11-01

    Full Text Available OBJECTIVE: Evaluate the acceptability of the project "Adding colour to your unit dose." MATERIAL AND METHODS: It sets in motion a project to reduce errors in the administration of pasting labels with different shapes and colours on blister medicines. It includes the name of the product, the active ingredient, dosage, lot and expiration date. Also included for internal quality control are the initials of the person who made the label and the date and time at which it was made. The nurse monitors the consistency between the data and the label of the drug. After 4 years the external acceptance of the project is analyzed through a satisfaction survey administered to the professionals involved in prescribing and dispensing medicines. RESULTS: 100% of the physicians believed that the project is adequate. Assistants and nurses expressed a dissatisfaction of 58.3% and 26.66% respectively due to the difficulty of extracting the specialty. CONCLUSIONS: - There is agreement on the need to clearly differentiate drugs, which traditional packaging does not resolve while “Adding colour to your unit dose" does. - The pharmacy prepared labels with a flap to facilitate their opening, thereby improving the current system.

  7. Nuclear power development and public acceptance

    International Nuclear Information System (INIS)

    Yoda, Sunao; Yamada, Akihiko

    1976-01-01

    The public acceptance aimed at realizing the development of nuclear energy of 49,000,000 kW in 1985 in accordance with the basic policy of the combined energy measures in Japan determined by the cabinet meeting in December 1975 is discussed, and the three principles, namely democracy, independence and disclosures under Article 2 of the Atomic Energy Act, are reviewed. Stronger friction may occur owing to the following characteristics of nuclear power development: it is comprehensive but apt to be sectional, too large scale, very long term, military secrecy, and international relations. In addition, there are the sensibility to radioactivity and illogical refusal in Japan. As to the democracy, the participation of the people to the development of nuclear power has not so far been considered. For example, the holding of public hearings has not been legal obligation, but only a by-law of Atomic Energy Commission. As to the independence, serious troubles have been experienced because of the complete dependence of U.S. techniques. As to the disclosure, the opening to the public of the commercial secrecy attached to the application for the approval of reactor installations is apt to be much disputed. In conclusion, it is believed that there is no other way than the exertion of straight effort under the three principles, so that the formation of public acceptance will be accomplished. (Iwakiri, K.)

  8. Public acceptance of nuclear power in Taiwan

    International Nuclear Information System (INIS)

    Liao, T.T.L.

    1992-01-01

    It is necessary to reach the public acceptance for nuclear power development program. During the process of the application for the approval from the government to implement the Fourth Nuclear Power Plant program in Taiwan, we initialized a series of communication program in the last two years and are expecting to convince the public that to develops nuclear power is essential to the country from a viewpoint of energy diversified. The basic strategies of the communication program not only emphasized the new nuclear power project, but also for the long term public acceptance on nuclear power. The strategies include: (1) Preview and implement the promotion program for the performance of the existing nuclear power plants. (2) Designate and communicate with the major communication target groups: elected delegates, journalists, local residents, scholars and experts. (3) Edit and incorporate the basic nuclear knowledge into the preliminary school educational materials. (4) Subsidize the adjacent communities of nuclear power plants for the public well-being construction. In order to implement the mentioned strategies, Taipower has reorganized the public service department and the existing nuclear power plants, setup the nuclear exhibition center, conducted fullscale emergency drill biannually for each of nuclear power plant, and prepared the seminars for the teacher

  9. An Analysis of Bitcoin Acceptance in Indonesia

    Directory of Open Access Journals (Sweden)

    Fergyanto E. Gunawan

    2017-12-01

    Full Text Available This research intended to understand the factors affecting the acceptance of Bitcoin technology in Indonesia. It adopted the model of Unified Theory of Acceptance and Use of Technology (UTAUT, which took into account four influencing factors. Those were performance expectancy, effort expectancy, social influence, and facilitating conditions. The factors of gender and age were assumed to moderate the relations between those four factors and use and behavioral intention. The empirical data for those factors were collected by questionnaires from 49 respondents. The statistical significance of the relationships was evaluated by multivariate regression analysis. The result is a model that matches the data with R2 = 0,678. It demonstrates a high level of fitness. The analysis suggests that the performance expectancy factor and the social influence factor greatly affect the behavioral intention to use Bitcoin with the values of t-statistic of 3,835 (p-value = 0,000 for the former factor and 1,948 (0,059 for the latter factor. However, the social influence factor has less profound effect on the behavioral intention.

  10. Renewable energy technology acceptance in Peninsular Malaysia

    International Nuclear Information System (INIS)

    Kardooni, Roozbeh; Yusoff, Sumiani Binti; Kari, Fatimah Binti

    2016-01-01

    Despite various policies, renewable energy resources have not been developed in Malaysia. This study investigates the factors that influence renewable energy technology acceptance in Peninsular Malaysia and attempts to show the impact of cost and knowledge on the perceived ease of use and perceived usefulness of renewable energy technology. The results show that cost of renewable energy has an indirect effect on attitudes towards using renewable energy through the associated impact on the perceived ease of use and perceived usefulness. The results also indicate that public knowledge in Peninsular Malaysia does not affect perceived ease of use, although the positive impact of knowledge on perceived usefulness is supported. Furthermore, our results show that the current business environment in Peninsular Malaysia does not support the adoption of renewable energy technology, and thus, renewable energy technology is not commercially viable in Peninsular Malaysia. Additionally, the population of Peninsular Malaysia associates the use of renewable energy with a high level of effort and therefore has a negative attitude towards the use of renewable energy technology. There is, therefore, a definite need to pay more attention to the role of public perception and awareness in the successes and failures of renewable energy policy. - Highlights: • Public acceptance is an essential element in the diffusion of renewable energy. • Perceived ease of use and perceived usefulness affect intention to use renewables. • It is important to reduce the cost of renewable energy, particularly for end users. • Renewable energy policies should address issues of public perception and awareness.

  11. When is a lie acceptable? Work and private life lying acceptance depends on its beneficiary.

    Science.gov (United States)

    Cantarero, Katarzyna; Szarota, Piotr; Stamkou, Eftychia; Navas, Marisol; Dominguez Espinosa, Alejandra Del Carmen

    2018-01-01

    In this article we show that when analyzing attitude towards lying in a cross-cultural setting, both the beneficiary of the lie (self vs other) and the context (private life vs. professional domain) should be considered. In a study conducted in Estonia, Ireland, Mexico, The Netherlands, Poland, Spain, and Sweden (N = 1345), in which participants evaluated stories presenting various types of lies, we found usefulness of relying on the dimensions. Results showed that in the joint sample the most acceptable were other-oriented lies concerning private life, then other-oriented lies in the professional domain, followed by egoistic lies in the professional domain; and the least acceptance was shown for egoistic lies regarding one's private life. We found a negative correlation between acceptance of a behavior and the evaluation of its deceitfulness.

  12. Data Quality Objectives for WTP Feed Acceptance Criteria - 12043

    Energy Technology Data Exchange (ETDEWEB)

    Arakali, Aruna V.; Benson, Peter A.; Duncan, Garth; Johnston, Jill C.; Lane, Thomas A.; Matis, George; Olson, John W. [Hanford Tank Waste Treatment and Immobilization Plant (United States); Banning, Davey L.; Greer, Daniel A.; Seidel, Cary M.; Thien, Michael G. [Hanford Tank Operations Contractor - Washington River Protection Solutions, Richland, WA 99354 (United States)

    2012-07-01

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is under construction for the U.S. Department of Energy by Bechtel National, Inc. and subcontractor URS Corporation (contract no. DE-AC27-01RV14136). The plant when completed will be the world's largest nuclear waste treatment facility. Bechtel and URS are tasked with designing, constructing, commissioning, and transitioning the plant to the long term operating contractor to process the legacy wastes that are stored in underground tanks (from nuclear weapons production between the 1940's and the 1980's). Approximately 56 million gallons of radioactive waste is currently stored in these tanks at the Hanford Site in southeastern Washington. There are three major WTP facilities being constructed for processing the tank waste feed. The Pretreatment (PT) facility receives feed where it is separated into a low activity waste (LAW) fraction and a high level waste (HLW) fraction. These fractions are transferred to the appropriate (HLW or LAW) facility, combined with glass former material, and sent to high temperature melters for formation of the glass product. In addition to PT, HLW and LAW, other facilities in WTP include the Laboratory (LAB) for analytical services and the Balance of Facilities (BOF) for plant maintenance, support and utility services. The transfer of staged feed from the waste storage tanks and acceptance in WTP receipt vessels require data for waste acceptance criteria (WAC) parameters from analysis of feed samples. The Data Quality Objectives (DQO) development was a joint team effort between WTP and Tank Operations Contractor (TOC) representatives. The focus of this DQO effort was to review WAC parameters and develop data quality requirements, the results of which will determine whether or not the staged feed can be transferred from the TOC to WTP receipt vessels. The approach involved systematic planning for data collection consistent with EPA guidance for the seven

  13. Project W-049H collection system Acceptance Test Procedure

    International Nuclear Information System (INIS)

    Carrigan, M.C.

    1994-01-01

    The purpose of this Acceptance Test Procedure (ATP) for the Project W-049H, Treated Effluent Disposal Facility, is to verify that the collection system equipment installed as Pump Station No. 1 (225-W) and Pump Station No. 2 (225-E) have been installed in accordance with the design documents and function as required by the project criteria. This will be a wet test with potable water being introduced into the pump pits to test for leakage. Potable water will also be employed in the testing of the pumps and related mechanical equipment. All Instrument and Control equipment related to the pump stations will be checked electronically with simulated inputs/outputs when actual input/output signals are unavailable. Water from Pump Station 1 will be moved through the TEDF piping system and discharged into the disposal ponds. This will check the proper function of the air/vac valves not tested during construction, and the automated samplers

  14. Acceptance for Beneficial Use Pumping Instrumentation and Control Skid L

    International Nuclear Information System (INIS)

    KOCH, M.R.

    1999-01-01

    This is a final Acceptance for Beneficial Use (ABU) for Pumping and Instrumentation Control (PIC) skid ''L''. PIC skid ''L'' is ready for pumping tank U-105. All the testing and documentation has been completed as required on the ABU checklist. This ABU covers only the readiness of the PIC skid ''L''. Other U-farm preparations including dilution tank fabrication, portable exhauster readiness, leak detection, valve pit preparation, and the Operation Control Station readiness are not part of this ABU. PIC skid ''L'' is a new skid fabricated and tested at Site Fabrication Services. The skid controls the jet pump and monitors various instruments associated with the pumping operation. This monitoring includes leak detection along the waste transfer route and flammable gases in the pump pit

  15. Deception in medical and behavioral research: is it ever acceptable?

    Science.gov (United States)

    Wendler, D

    1996-01-01

    Ethicists argue that deception is unacceptable, whereas researchers regard it as a necessary part of (certain kinds of) research. This impasse could be resolved by establishing the specific conditions under which deception in medical and behavioral research can be tolerated. An approach based on a consideration of the "Ethical Principles of Psychologists and Code of Conduct," one of the few writings on this topic, would satisfy the needs of both parties. It takes the form of a requirement that subjects be informed of the use of deception before enrolling in a deceptive study. This "second order consent" approach to acceptable deception represents our best chance for reconciling respect for subjects with the occasional scientific need for deceptive research.

  16. Challenge accepted : Genessee Mine working to maintain clean record

    Energy Technology Data Exchange (ETDEWEB)

    Ednie, H.

    2010-09-15

    The Genesee Mine produces 5.5 million tonnes of coal annually for the Genesee Power Plant run by Capital Power. The mine operators place much emphasis on safety and have achieved 22 consecutive years without a lost time accident, which is as long as the mine has been in operation. After recently accepting its tenth safety award, the company recognizes that it must avoid complacency. Employees were asked their opinions regarding the company's safety record. The employee response was that positive attitudes contribute to the safe work environment, together with competent trainers, employee interest in the condition of equipment, good communication, and good leadership. The on-site workforce now encompasses over 160 employees. The ISO 9000 and 14001 and other standards and policies have not only driven the safety program, but the safety performance to date has set the bar high. A hazard assessment program requires that crew be responsive to safety indicators every day. 1 fig.

  17. What makes nuclear energy (not) acceptable?

    Energy Technology Data Exchange (ETDEWEB)

    Turcanu, C.; Perko, T. [Belgian Nuclear Research Centre (SCK-CEN), Mol (Belgium). Society and Policy Support; Kermisch, C. [Universite Libre de Bruxelles (Belgium). Fonds de la Recherche Scientifique

    2013-08-15

    Higher knowledge has long been hypothesized as leading to better acceptance of nuclear energy, but in the last years other factors such as risk perception and trust in nuclear risk governance were also recognized as key elements. While stakeholder involvement is now fully recognized as a key element for nuclear energy acceptance, there are still questions about the impact of higher knowledge. This paper investigates the relation between knowledge about the nuclear domain, risk perception of nuclear risks, confidence in the management of nuclear technologies, on the one hand, and the attitude towards nuclear energy and opinion about nuclear energy, on the other hand. It also studies the factors that are pleading in favour or against nuclear energy and their relation with the forementioned variables. The study is based on empirical data from a large scale opinion survey in Belgium between 25/05/2011 and 24/06/2011, i.e. the third month after the accident in Fukushima. The sample consisted of 1020 respondents and is representative for the Belgian adult population (18+) with respect to gender, age, region, province, habitat and social class. Our results show that confidence in the safe management of nuclear technologies as well as the perceived strength of the arguments pro/against nuclear are driving factors for people's attitude towards nuclear energy. Higher confidence and stronger adherence to the arguments in favour of nuclear energy lead to higher acceptance. The correlation between knowledge and attitude/opinion towards nuclear energy is statistically significant, but rather low, showing only a weak effect of knowledge on attitudes or opinions about nuclear energy. A weak effect is also observed for risk perception of nuclear risks, lower risk perception leading to a somewhat more positive attitude/opinion about nuclear energy. In the study we also highlight that the main factors seen as pleading in favour or against nuclear energy are the same, both for

  18. ANALYSING ACCEPTANCE SAMPLING PLANS BY MARKOV CHAINS

    Directory of Open Access Journals (Sweden)

    Mohammad Mirabi

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: In this research, a Markov analysis of acceptance sampling plans in a single stage and in two stages is proposed, based on the quality of the items inspected. In a stage of this policy, if the number of defective items in a sample of inspected items is more than the upper threshold, the batch is rejected. However, the batch is accepted if the number of defective items is less than the lower threshold. Nonetheless, when the number of defective items falls between the upper and lower thresholds, the decision-making process continues to inspect the items and collect further samples. The primary objective is to determine the optimal values of the upper and lower thresholds using a Markov process to minimise the total cost associated with a batch acceptance policy. A solution method is presented, along with a numerical demonstration of the application of the proposed methodology.

    AFRIKAANSE OPSOMMING: In hierdie navorsing word ’n Markov-ontleding gedoen van aannamemonsternemingsplanne wat plaasvind in ’n enkele stap of in twee stappe na gelang van die kwaliteit van die items wat geïnspekteer word. Indien die eerste monster toon dat die aantal defektiewe items ’n boonste grens oorskry, word die lot afgekeur. Indien die eerste monster toon dat die aantal defektiewe items minder is as ’n onderste grens, word die lot aanvaar. Indien die eerste monster toon dat die aantal defektiewe items in die gebied tussen die boonste en onderste grense lê, word die besluitnemingsproses voortgesit en verdere monsters word geneem. Die primêre doel is om die optimale waardes van die booonste en onderste grense te bepaal deur gebruik te maak van ’n Markov-proses sodat die totale koste verbonde aan die proses geminimiseer kan word. ’n Oplossing word daarna voorgehou tesame met ’n numeriese voorbeeld van die toepassing van die voorgestelde oplossing.

  19. Acceptable risk as a basis for design

    International Nuclear Information System (INIS)

    Vrijling, J.K.; Hengel, W. van; Houben, R.J.

    1998-01-01

    Historically, human civilisations have striven to protect themselves against natural and man-made hazards. The degree of protection is a matter of political choice. Today this choice should be expressed in terms of risk and acceptable probability of failure to form the basis of the probabilistic design of the protection. It is additionally argued that the choice for a certain technology and the connected risk is made in a cost-benefit framework. The benefits and the costs including risk are weighed in the decision process. A set of rules for the evaluation of risk is proposed and tested in cases. The set of rules leads to technical advice in a question that has to be decided politically

  20. Effective communications bring greater public acceptance

    International Nuclear Information System (INIS)

    Clawson, C.

    1992-01-01

    In 1986, GPU Nuclear Corporation announced a plan to evaporate into the atmosphere 2.3 million gal of water remaining from the Three Mile Island Unit 2 (TMI-2) accident. The water would be processed to remove most of the radioactivity, but still remaining were >1,000 Ci of tritium to be released to the atmosphere during the evaporation process. It was expected that, following regulatory approvals, it would take >2 yr to complete the process. Fed by well-established antinuclear groups, public concern about evaporating the TMI-2-accident-generated water ran high among residents living near the plant. In the years since the TMI-2 accident, GPU Nuclear had developed a highly effective communications program in the communities surrounding TMI. This ongoing program provided a solid foundation on which to create and implement a risk communications approach to community understanding and acceptance of the evaporation process

  1. Nuclear energy: beliefs, values, and acceptability

    Energy Technology Data Exchange (ETDEWEB)

    van der Pligt, J; Eiser, J R

    1985-06-01

    The last decade has seen a dramatic increase in public concern about nuclear energy. As a consequence, it has become recognized that the future of nuclear energy will not only depend on technical and economic factors, but that public acceptability of this technology will play a crucial role in the long-term future of nuclear energy. Research has shown a considerable divergence in public and expert assessment of the risks associated with nuclear energy. Qualitative aspects of risks play a dominant role in the public's perception of risks, and it seems necessary for experts to recognize this in order to improve relations with the general public. It is also clear, however, that differences in the perception of risks do not embrace all the relevant aspects of the public's assessment of nuclear energy. Public reaction is also related to more general beliefs and values, and the issue of nuclear energy is embedded in a much wider moral and political domain. 8 references.

  2. KNOWLEDGE AND ACCEPTANCE OF RFID TRACEABILITY SOLUTIONS

    Directory of Open Access Journals (Sweden)

    Zoltan KATO

    2014-06-01

    Full Text Available In recent years the food market has become highly dynamic. Food crises in the early 90's, or those of the recent years, such as avian flu pandemic, swine flu, the cucumber or horse meat crises all had a negative impact on the Romanian food industry. Food deficiencies have led not only to contamination but also to the illness or death of some consumers. The products traceability is a prerequisite for success in the food industry. As a modern solution, RFID technology can be useful for traceability applications made with rewritable passive RFID tags. This paper aims to examine how RFID technology can be useful for traceability applications and will submit a diligent search regarding the degree of knowledge of RFID technology and the acceptance of an empirical model by the employees of Romanian companies.

  3. The NA49 large acceptance hadron detector

    International Nuclear Information System (INIS)

    Afanasiev, S.; Alber, T.; Appelshaeuser, H.; Baechler, J.; Barna, D.; Barnby, L.S.; Bartke, J.; Barton, R.A.; Betev, L.; Bialkowska, H.; Bieser, F.; Billmeier, A.; Blyth, C.O.; Bock, R.; Bormann, C.; Bracinik, J.; Brady, F.P.; Brockmann, R.; Brun, R.; Buncic, P.; Caines, H.L.; Cebra, D.; Cooper, G.E.; Cramer, J.G.; Csato, P.; Cyprian, M.; Dunn, J.; Eckardt, V.; Eckhardt, F.; Empl, T.; Eschke, J.; Ferguson, M.I.; Fessler, H.; Fischer, H.G.; Flierl, D.; Fodor, Z.; Frankenfeld, U.; Foka, P.; Freund, P.; Friese, V.; Ftacnik, J.; Fuchs, M.; Gabler, F.; Gal, J.; Ganz, R.; Gazdzicki, M.; Gladysz, E.; Grebieszkow, J.; Guenther, J.; Harris, J.W.; Hegyi, S.; Henkel, T.; Hill, L.A.; Hlinka, V.; Huang, I.; Huemmler, H.; Igo, G.; Irmscher, D.; Ivanov, M.; Janik, R.; Jacobs, P.; Jones, P.G.; Kadija, K.; Kolesnikov, V.I.; Kowalski, M.; Lasiuk, B.; Levai, P.; Liebicher, K.; Lynen, U.; Malakhov, A.I.; Margetis, S.; Markert, C.; Marks, C.; Mayes, B.; Melkumov, G.L.; Mock, A.; Molnar, J.; Nelson, J.M.; Oldenburg, M.; Odyniec, G.; Palla, G.; Panagiotou, A.D.; Pestov, Y.; Petridis, A.; Pikna, M.; Pimpl, W.; Pinsky, L.; Piper, A.; Porter, R.J.; Poskanzer, A.M.; Poziombka, S.; Prindle, D.J.; Puehlhofer, F.; Rauch, W.; Reid, J.G.; Renfordt, R.; Retyk, W.; Ritter, H.G.; Roehrich, D.; Roland, C.; Roland, G.; Rudolph, H.; Rybicki, A.; Sammer, T.; Sandoval, A.; Sann, H.; Schaefer, E.; Schmidt, R.; Schmischke, D.; Schmitz, N.; Schoenfelder, S.; Semenov, A.Yu.; Seyboth, J.; Seyboth, P.; Seyerlein, J.; Sikler, F.; Sitar, B.; Skrzypczak, E.; Squier, G.T.A.; Stelzer, H.; Stock, R.; Strmen, P.; Stroebele, H.; Struck, C.; Susa, T.; Szarka, I.; Szentpetery, I.; Szymanski, P.; Sziklai, J.; Toy, M.; Trainor, T.A.; Trentalange, S.; Ullrich, T.; Vassiliou, M.; Veres, G.; Vesztergombi, G.; Vranic, D.; Wang, F.Q.; Weerasundara, D.D.; Wenig, S.; Whitten, C.; Wieman, H.; Wienold, T.; Wood, L.; Yates, T.A.; Zimanyi, J.; Zhu, X.-Z.; Zybert, R.

    1999-01-01

    The NA49 detector is a wide acceptance spectrometer for the study of hadron production in p+p, p+A, and A+A collisions at the CERN SPS. The main components are 4 large-volume TPCs for tracking and particle identification via dE/dx. TOF scintillator arrays complement particle identification. Calorimeters for transverse energy determination and triggering, a detector for centrality selection in p+A collisions, and beam definition detectors complete the set-up. A description of all detector components is given with emphasis on new technical realizations. Performance and operational experience are discussed in particular with respect to the high track density environment of central Pb+Pb collisions

  4. The NA49 large acceptance hadron detector

    CERN Document Server

    Afanasiev, S V; Appelshäuser, H; Bächler, J; Barna, D; Barnby, L S; Bartke, Jerzy; Barton, R A; Betev, L; Bialkowska, H; Bieser, F; Billmeier, A; Blyth, C O; Böck, R K; Bormann, C; Bracinik, J; Brady, F P; Brockmann, R; Brun, R; Buncic, P; Caines, H L; Cebra, D; Cooper, G E; Cramer, J G; Csató, P; Cyprian, M; Dunn, J; Eckardt, V; Eckhardt, F; Empl, T; Eschke, J; Ferguson, M I; Fessler, H; Fischer, H G; Flierl, D; Fodor, Z; Frankenfeld, Ulrich; Foka, P Y; Freund, P; Friese, V; Ftácnik, J; Fuchs, M; Gabler, F; Gál, J; Ganz, R E; Gazdzicki, M; Gladysz-Dziadus, E; Grebieszkow, J; Günther, J; Harris, J W; Hegyi, S; Henkel, T; Hill, L A; Hlinka, V; Huang, I; Hümmler, H; Igo, G; Irmscher, D; Ivanov, M; Janik, R; Jacobs, P; Jones, P G; Kadija, K; Kolesnikov, V I; Kowalski, M; Lasiuk, B; Lévai, Peter; Liebicher, K; Lynen, U; Malakhov, A I; Margetis, S; Markert, C; Marks, C; Mayes, B W; Melkumov, G L; Mock, A; Molnár, J; Nelson, J M; Oldenburg, M; Odyniec, Grazyna Janina; Pálla, G; Panagiotou, A D; Pestov, Yu N; Petridis, A; Pikna, M; Pimpl, W; Pinsky, L; Piper, A; Porter, R J; Poskanzer, A M; Poziombka, S; Prindle, D J; Pühlhofer, F; Rauch, W; Reid, J G; Renfordt, R E; Retyk, W; Ritter, H G; Röhrich, D; Roland, C; Roland, G; Rudolph, H; Rybicki, A; Sammer, T; Sandoval, A; Sann, H; Schäfer, E; Schmidt, R; Schmischke, D; Schmitz, N; Schönfelder, S; Semenov, A Yu; Seyboth, J; Seyboth, P; Seyerlein, J; Siklér, F; Sitár, B; Skrzypczak, E; Squier, G T A; Stelzer, H; Stock, Reinhard; Strmen, P; Ströbele, H; Struck, C; Susa, T; Szarka, I; Szentpétery, I; Szymanski, P; Sziklai, J; Toy, M; Trainor, T A; Trentalange, S; Ullrich, T S; Vassiliou, Maria; Veres, G I; Vesztergombi, G; Vranic, D; Wang, F; Weerasundara, D D; Wenig, S; Whitten, C; Wieman, H H; Wienold, T; Wood, L; Yates, T A; Zimányi, J; Zhu, X Z; Zybert, R

    1999-01-01

    The NA49 detector is a wide acceptance spectrometer for the study of hadron production in p+p, p+A, and A+A collisions at the CERN SPS. The main components are 4 large volume TPCs for tracking and particle identification via $dE/dx$. TOF scintillator arrays complement particle identification. Calorimeters for transverse energy determination and triggering, a detector for centrality selection in p+A collisions, and beam definition detectors complete the set-up. A description of all detector components is given with emphasis on new technical realizations. Performance and operational experience are discussed in particular with respect to the high track density environment of central Pb+Pb collisions.

  5. A consideration on Public Nuclear Energy Acceptance

    International Nuclear Information System (INIS)

    Seki, Yosinobu

    1998-01-01

    PA (Public Acceptance for Nuclear Energy) has been discussed so long time. Much of people understood, it is so important, but they understood, it has not existed with good evaluation method. Only saying, it is necessary to distribute a correct knowledge to public, but how we can do? It is hard to do. Saying inside talking to others, teach speaking for the people, or showing on the same stage opposite people and understandable people. They do not fit the purpose. First key word is curiosity, 2nd one is the intelligence circle, instead of unusable knowledge and third one is the long time continuation. To do actual should consider on the sounding circumstance and the feeling of person to talk. To find the way is very complicated and difficult to do. The second cartoon has been published for high-level waste burying. (author)

  6. Workplace violence: managing a culture of acceptance.

    Science.gov (United States)

    Fredrick, Marie

    2014-01-01

    The cultural acceptance of workplace violence is changing. Management has become more educated on regulatory issues around its tolerance of workplace violence. Events around the country in a variety of settings have aided in raising awareness of this issue. Healthcare professionals are not immune to workplace violence, including those working in the imaging profession. Healthcare workers, historically, have given care despite the demeanor of patients, often putting up with aggressive behavior including sexual harassment and physical assault. Management needs to take all possible measures to ensure employees feel safe at work. It is essential to have well thought out policies and procedures to mitigate workplace violence; keeping in mind that a goal of eliminating workplace violence is unrealistic.

  7. PAGs - Public perception and acceptance[Protective Action Guides (PAGs)

    Energy Technology Data Exchange (ETDEWEB)

    Quillin, Robert M [Radiation Control Division, Colorado Department of Health, Denver, CO (United States)

    1989-09-01

    Full text: While Protective Action Guides or PAGs have been a part of the lexicon of the radiation protection field for several decades, the concept of accepting higher levels of risk under certain situations has not received adequate scrutiny by the general public, the media or elected officials. Consequently there is a question as to how implementation of PAGs would be perceived by the above groups in the event that such implementation became necessary. A personal case in point involves the response of an executive in the food industry. When the concept of selling a food product meeting the PAGs was explained his response was, 'we won't sell a contaminated product, we would dump the unprocessed raw food. Our industry image is that of a natural unadulterated food'. While this may be an isolated view, there is a need to determine what is the perception and consequently what would be the response if PAGs were implemented today. If the response was negative by anyone of the three groups listed previously, then there is an obvious need for a program to assure receptiveness by those concerned. However, this may face formidable obstacles. This is because the terms radiation and radioactive have gained generally negative word associations, e.g. 'deadly' radiation and radioactive 'desert'. The former term was recently heard in a taped presentation at a Museum of Natural History on a completely unrelated subject. The latter term was part of a recent article heading in the Wall Street Journal. Incidentally the article was discussing television. Thus beyond the scientific issues of setting PAGs and the administrative and procedural issues of implementing PAGs there is the issue of society's understanding and acceptance of PAGs. Particularly, how can such understanding and acceptance be achieved in a situation which is associated with an actual or perceived radiation emergency? These are not questions that radiation or agricultural scientists can answer alone. These are

  8. Acceptance of food irradiation in western markets

    Energy Technology Data Exchange (ETDEWEB)

    Ting, H H [PURIDEC Irradiation Technologies, Buckinghamshire, England (United Kingdom)

    1997-12-31

    This paper reviews the status and acceptance of food irradiation worldwide, focusing on Europe and the United States. Today no less than 38 countries including the USA and 14 European countries, have approved the irradiation of food. Across Europe there is a very wide variation, with a variety of foods being irradiated and eaten in Belgium and France but a total ban on food irradiation in Germany. Progress towards a directive harmonising the position across all countries in the European Union is slow. In the USA there is a growing awareness of the advantages of using food irradiation to combat the increasing risk of the food-borne diseases, and media coverage and consumer attitudes are considerably more favourable than previously. The use of irradiation instead of pesticides for spice treatment is gaining acceptance within the North American spice industry and the NA meat industry is recognising the potential of food irradiation as one way of meeting its obligations under the new HACCP regulations. Food irradiation is also being seriously considered as an alternative to the use of methyl bromide for quarantine treatment of fruit and vegetables. The establishment of the World Trade Organisation in 1995 to enforce various agreements concluded during the GATT Uruguay Round is expected to impact trade liberalisation. In particular the agreements pertaining to the Application of Sanitary and Phytosanitary Measures (SPS) and on Technical Barriers to Trade (TBT) have particular reference to track in irradiated food. In this respect, it is particularly important for potential training partners (food producing countries) to ensure that they have domestic approvals in place for any irradiated foods they provide to western countries. (author). countries. (author).

  9. Public acceptance of radioactive waste transportation systems

    International Nuclear Information System (INIS)

    Gablin, K.A.

    1978-01-01

    As the thoughts of the country concentrate on the problems of transportation of waste through high traffic urban areas, the problem of how to deal directly and honestly with the public takes on greater significance in the nuclear industry. Non-technical aspects of the methods of transportation, especially by railroad and highway, enter into the total scheme of moving radioactive waste from both weapon and nuclear power plant sources to final processing and disposal. Factors such as shape, color, size, familiarity, and industrial designing are necessary ingredients that take on equal or more significance that the designing of containers to survive the hypothetical accident conditions of the present, or even of the future. Protective Packaging, Inc. has been a leader in the presentation of containers to the private and public sector of the nuclear industry. The products have undergone very open testing, in public, with both invited and uninvited witnesses. In those experiences, dating back to 1969, the problems of public acceptance will be related between the technical problems and the associated social and political problems that relate to container acceptance by the public in today's world. Proven experience data, relative to the safety of the present day systems will be discussed, as well as methods of improving the image in the future. Review will also be given to the effort by industry to discuss the proven record with parties outside the nuclear industry, i.e., individuals and pressure groups that are diametrically opposed to review the facts relative to safety as opposed to other, but more traditional industries

  10. Grazing function g and collimation angular acceptance

    Directory of Open Access Journals (Sweden)

    Stephen G. Peggs

    2009-11-01

    Full Text Available The grazing function g is introduced—a synchrobetatron optical quantity that is analogous (and closely connected to the Twiss and dispersion functions β, α, η, and η^{′}. It parametrizes the rate of change of total angle with respect to synchrotron amplitude for grazing particles, which just touch the surface of an aperture when their synchrotron and betatron oscillations are simultaneously (in time at their extreme displacements. The grazing function can be important at collimators with limited acceptance angles. For example, it is important in both modes of crystal collimation operation—in channeling and in volume reflection. The grazing function is independent of the collimator type—crystal or amorphous—but can depend strongly on its azimuthal location. The rigorous synchrobetatron condition g=0 is solved, by invoking the close connection between the grazing function and the slope of the normalized dispersion. Propagation of the grazing function is described, through drifts, dipoles, and quadrupoles. Analytic expressions are developed for g in perfectly matched periodic FODO cells, and in the presence of β or η error waves. These analytic approximations are shown to be, in general, in good agreement with realistic numerical examples. The grazing function is shown to scale linearly with FODO cell bend angle, but to be independent of FODO cell length. The ideal value is g=0 at the collimator, but finite nonzero values are acceptable. Practically achievable grazing functions are described and evaluated, for both amorphous and crystal primary collimators, at RHIC, the SPS (UA9, the Tevatron (T-980, and the LHC.

  11. Acceptance of food irradiation in western markets

    International Nuclear Information System (INIS)

    Ting, H.H.

    1996-01-01

    This paper reviews the status and acceptance of food irradiation worldwide, focusing on Europe and the United States. Today no less than 38 countries including the USA and 14 European countries, have approved the irradiation of food. Across Europe there is a very wide variation, with a variety of foods being irradiated and eaten in Belgium and France but a total ban on food irradiation in Germany. Progress towards a directive harmonising the position across all countries in the European Union is slow. In the USA there is a growing awareness of the advantages of using food irradiation to combat the increasing risk of the food-borne diseases, and media coverage and consumer attitudes are considerably more favourable than previously. The use of irradiation instead of pesticides for spice treatment is gaining acceptance within the North American spice industry and the NA meat industry is recognising the potential of food irradiation as one way of meeting its obligations under the new HACCP regulations. Food irradiation is also being seriously considered as an alternative to the use of methyl bromide for quarantine treatment of fruit and vegetables. The establishment of the World Trade Organisation in 1995 to enforce various agreements concluded during the GATT Uruguay Round is expected to impact trade liberalisation. In particular the agreements pertaining to the Application of Sanitary and Phytosanitary Measures (SPS) and on Technical Barriers to Trade (TBT) have particular reference to track in irradiated food. In this respect, it is particularly important for potential training partners (food producing countries) to ensure that they have domestic approvals in place for any irradiated foods they provide to western countries. (author). countries. (author)

  12. 75 FR 54802 - Requirement of a Statement Disclosing Uncertain Tax Positions

    Science.gov (United States)

    2010-09-09

    ... return. Corporations that prepare financial statements are required by generally accepted accounting principles to identify and quantify all uncertain tax positions as described in Financial Accounting..., including International Financial Reporting Standards and country-specific generally accepted accounting...

  13. Acceptance Test Report for 241-U compressed air system

    International Nuclear Information System (INIS)

    Freeman, R.D.

    1994-01-01

    This Acceptance Test Report (ATR) documents the results of acceptance testing of a newly upgraded compressed air system at 241-U Farm. The system was installed and the test successfully performed under work package 2W-92-01027

  14. 48 CFR 828.203 - Acceptability of individual sureties.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Acceptability of individual sureties. 828.203 Section 828.203 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... Acceptability of individual sureties. ...

  15. Dual earners’ willingness to accept an international assignment.

    NARCIS (Netherlands)

    van der Velde, E.G.; Bossink, C.J.H.; Jansen, P.G.W.

    2005-01-01

    Multinational organisations experience difficulties in finding managers willing to accept international assignments. This study has therefore focused on factors that can predict males' and females' willingness to accept international assignments, or to follow their partners on international

  16. User Acceptance of Long-Term Evolution (LTE) Services: An Application of Extended Technology Acceptance Model

    Science.gov (United States)

    Park, Eunil; Kim, Ki Joon

    2013-01-01

    Purpose: The aim of this paper is to propose an integrated path model in order to explore user acceptance of long-term evolution (LTE) services by examining potential causal relationships between key psychological factors and user intention to use the services. Design/methodology/approach: Online survey data collected from 1,344 users are analysed…

  17. Examining Engineering & Technology Students' Acceptance of Network Virtualization Technology Using the Technology Acceptance Model

    Science.gov (United States)

    Yousif, Wael K.

    2010-01-01

    This causal and correlational study was designed to extend the Technology Acceptance Model (TAM) and to test its applicability to Valencia Community College (VCC) Engineering and Technology students as the target user group when investigating the factors influencing their decision to adopt and to utilize VMware as the target technology. In…

  18. Perception and acceptance of technological risk sources. Volume 2. Empirical analysis of risk perception and acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Renn, O

    1981-01-01

    Volume 2 presents a comparative investigation of risk perception and acceptance. It contains the evaluations of the two experiments in social psychology and the analysis of two intensive inquiries concerning risk perception with a view to 12 different risk sources. The data of the two inquiries were acquired from a total of 200 interview partners in two cities in North-Rhine Westphalia.

  19. User Acceptance of YouTube for Procedural Learning: An Extension of the Technology Acceptance Model

    Science.gov (United States)

    Lee, Doo Young; Lehto, Mark R.

    2013-01-01

    The present study was framed using the Technology Acceptance Model (TAM) to identify determinants affecting behavioral intention to use YouTube. Most importantly, this research emphasizes the motives for using YouTube, which is notable given its extrinsic task goal of being used for procedural learning tasks. Our conceptual framework included two…

  20. Factors Influencing the Acceptance of Web-Based Training in Malaysia: Applying the Technology Acceptance Model

    Science.gov (United States)

    Hashim, Junaidah

    2008-01-01

    Companies in Malaysia are beginning to use web-based training to reduce the cost of training and to provide employees with greater access to instruction. However, some people are uncomfortable with technology and prefer person-to-person methods of training. This study examines the acceptance of web-based training among a convenience sample of 261…

  1. Blog acceptance model: An empirical study on exploring users’ acceptance and continual usage of blogs

    Institute of Scientific and Technical Information of China (English)

    ZHAO; Yuxiang; ZHU; Qinghua

    2009-01-01

    Blogs have permeated into our daily lives at a fast speed,and various kinds of blog spaces have attracted our attention.However,little effort has been made on studying the users’motivation to participate in blog activities.This paper aims to construct a theoretical model about the blog adoption based on technology acceptance model(TAM theory),social capital theory and social exchange theory,and put forward 18 related hypotheses.Then the survey method is adopted to analyze the data from 208 questionnaires using the SPSS and LISREL tools,and to examine the theoretical model and hypotheses.Finally,the paper makes a discussion from five aspects due to the results of data analysis,including individual driving factors,group driving factors,community driving factors,technology acceptance factors and moderating variables.The results show that curiosity/enjoyment,user’s experience,social interaction and social identification will greatly affect users’motivation to accept a blog;meanwhile,perceived ease of use,exchange cost and trust will partially influence users’intention to participate in blog activities.The results also suggest that age and education degrees have significant moderating effects on users’acceptance and updating of blogs.

  2. Acceptance- versus Change-Based Pain Management: The Role of Psychological Acceptance

    Science.gov (United States)

    Blacker, Kara J.; Herbert, James D.; Forman, Evan M.; Kounios, John

    2012-01-01

    This study compared two theoretically opposed strategies for acute pain management: an acceptance-based and a change-based approach. These two strategies were compared in a within-subjects design using the cold pressor test as an acute pain induction method. Participants completed a baseline pain tolerance assessment followed by one of the two…

  3. Social acceptance of renewable energy technologies for buildings in the Helsinki Metropolitan Area of Finland

    NARCIS (Netherlands)

    Jung, N.; Moula, M.E.; Fang, T.; Hamdy, M.; Lahdelma, R.

    2016-01-01

    The application of renewable energy technologies (RETs) in the residential building sector requires acceptance of technical solutions by key stakeholders, such as building owners, real-estate developers, and energy providers. The objective of this study is to identify the current status of public

  4. Makespan estimation and order acceptance in batch process industries when processing times are uncertain

    NARCIS (Netherlands)

    Ivanescu, V.C.; Fransoo, J.C.; Bertrand, J.W.M.

    2002-01-01

    Batch process industries are characterized by complex precedence relationships between operations, which renders the estimation of an acceptable workload very difficult. A detailed schedule based model can be used for this purpose, but for large problems this may require a prohibitive large amount

  5. Acceptance and Usability of OER in Indian Higher Education: An Investigation Using UTAUT Model

    Science.gov (United States)

    Padhi, Nayantara

    2018-01-01

    In the global movement towards open knowledge society, open educational resources (OER) have become a prominent contributor as a medium of education, research and training. In India, the phenomenon of OER is still in nascent stage. Although the country has been massively investing on growth and usage of ICT, it still requires acceptance of OER as…

  6. 24 CFR 941.403 - Acceptance of work and contract settlement.

    Science.gov (United States)

    2010-04-01

    ... URBAN DEVELOPMENT PUBLIC HOUSING DEVELOPMENT Project Development § 941.403 Acceptance of work and... project guaranty period and amounts to be withheld and shall provide for assignment to the PHA of all manufacturer and supplier warranties required by the construction documents. The PHA shall inspect each...

  7. Social acceptance of negotiation support systems : Scenario-based exploration with focus groups and online survey

    NARCIS (Netherlands)

    Pommeranz, A.; Wiggers, P.; Brinkman, W.P.; Jonker, C.M.

    2011-01-01

    We investigate people’s attitudes toward the possible use of negotiation support systems (NSS) in different social contexts and the consequences for their design. To explore functional requirements and social acceptance in different use contexts, we followed a threestep approach. In the first step,

  8. Defining social acceptability in ecosystem management: a workshop proceedings; 1992 June 23-25; Kelso, WA.

    Science.gov (United States)

    Mark W. Brunson; Linda E. Kruger; Catherine B. Tyler; Susan A. Schroeder

    1996-01-01

    This compendium of papers was developed in response to the assumption that implementing an ecological approach to forest management requires an understanding of socially acceptable forestry—what it is and the implications of doing it. The papers in this collection bring to bear perspectives from a variety of social science disciplines and question whether the...

  9. Preliminary waste acceptance criteria for the ICPP spent fuel and waste management technology development program

    International Nuclear Information System (INIS)

    Taylor, L.L.; Shikashio, R.

    1993-09-01

    The purpose of this document is to identify requirements to be met by the Producer/Shipper of Spent Nuclear Fuel/High-LeveL Waste SNF/HLW in order for DOE to be able to accept the packaged materials. This includes defining both standard and nonstandard waste forms

  10. 10 CFR 50.46a - Acceptance criteria for reactor coolant system venting systems.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Acceptance criteria for reactor coolant system venting systems. 50.46a Section 50.46a Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND... function of these systems. High point vents are not required for the tubes in U-tube steam generators...

  11. Restrictions on TWT Helix Voltage Ripple for Acceptable Notch Filter Performance

    Energy Technology Data Exchange (ETDEWEB)

    Hyslop, B.

    1984-12-01

    An ac ripple on the helix voltage of the 1-2 GHz TWT's creates FM sidebands that cause amplitude and phase modulation of the microwave TWT output signal. A limit of 16 volts peak-to-peak is required for acceptable superconducting notch filter performance.

  12. Project W-320, backup: 1000 CFM portable exhausters acceptance for beneficial use

    International Nuclear Information System (INIS)

    Nelson, O.D.

    1998-01-01

    This document is to identify the Project W-320 1000 CFM portable exhauster documentation required to be turned over from the Projects Organization to the Tank Farm Operations as part of the acceptance of the 1000 CFM portable exhausters for beneficial use

  13. 242-A MCS Logic Acceptance Test Report for Year 2000 Upgrade

    International Nuclear Information System (INIS)

    TEATS, M.C.

    1999-01-01

    242-A Evaporator distributive control system upgrade to D/3 version 9.0-2 for year 2000 compliance. Testing was performed per test procedure HNF-3568. There were no unresolved exceptions. The system responded correctly to all testing and meets the requirements to operate the 242-A This report documents the acceptance test results for the Evaporator facility

  14. 20 CFR 653.501 - Requirements for accepting and processing clearance orders.

    Science.gov (United States)

    2010-04-01

    ... the job order. (i) No agricultural or food processing order shall be included in job bank listings... clearance any job order seeking workers to perform agricultural or food processing work before reviewing it... order seeking workers to perform agricultural or food processing work into intrastate clearance unless...

  15. Market acceptance of cloud computing: An analysis of market structure, price models and service requirements

    OpenAIRE

    Han, Lei

    2009-01-01

    Diese Arbeit betrachtet menschliches Verhalten auf elektronischen Märkten. In diesem Zusammenhang wurden zwei Experimente durchgeführt, die das Auction Fever in Holländischen Auktionen sowie das menschliche Risikoverhalten im sehr hohen Wahrscheinlichkeitsbereich näher untersuchen. Im Experiment zum menschlichen Risikoverhalten wurde speziell die Bewertung hoher Gewinnwahrscheinlichkeiten durch die Teilnehmer untersucht. Hinsichtlich des Auction Fever wurde ein Referenzexperiment beschrieben,...

  16. 77 FR 43141 - Air Carrier Hazardous Materials Passenger Notification Requirements: Acceptable Means of Compliance

    Science.gov (United States)

    2012-07-23

    ... party travel sites operated by travel agents and online travel retailers (Orbitz, Expedia, Travelocity, etc.)? If so, is it the responsibility of the carrier or the travel agent/retailer to provide the... ``Any organization or enterprise other than an operator (such as a travel agent) * * * should provide...

  17. 77 FR 51880 - Requirements for Maintenance of Inspections, Tests, Analyses, and Acceptance Criteria

    Science.gov (United States)

    2012-08-28

    ....regulations.gov and search for Docket ID NRC-2010-0012. NRC's Agencywide Documents Access and Management... Program for ITAAC Management,'' which provides guidance to verify that licensees have implemented ITAAC.... Rather, the NRC would use a holistic review using results from the NRC's construction inspection program...

  18. 76 FR 27925 - Requirements for Maintenance of Inspections, Tests, Analyses, and Acceptance Criteria

    Science.gov (United States)

    2011-05-13

    ... and Management System (ADAMS) and other methods for obtaining publicly available documents related to... issued Inspection Procedure 40600, ``Licensee Program for ITAAC Management,'' that provides guidance to..., as a primary basis for the 10 CFR 52.103(g) finding. Rather, the NRC would use a holistic review...

  19. Cements in radioactive waste management. Characterization requirements of cement products for acceptance and quality assurance purposes

    International Nuclear Information System (INIS)

    Rahman, A.A.; Glasser, F.P.

    1987-01-01

    Cementitious materials are used as immobilizing matrices for low (LLW) and medium-level wastes (MLW) and are also components of the construction materials in the secondary barriers and the repositories. This report has concerned itself with a critical assessment of the quality assurance aspects of the immobilization and disposal of MLW and LLW cemented wastes. This report has collated the existing knowledge of the use and potential of cementitious materials in radioactive waste immobilization and highlighted the physico-chemical parameters. Subject areas include an assessment of immobilization objectives and cement as a durable material, waste stream and matrix characterization, quality assurance concepts, nature of cement-based systems, chemistry and modelling of cement hydration, role and effect of blending agents, radwaste-cement interaction, assessment of durability, degradative and radiolytic processes in cements and the behaviour of cement-based matrices and their near-field interactions with the environment and the repository conditions

  20. Public acceptance of a hypothetical Ebola virus vaccine in Aceh, Indonesia: A hospital-based survey

    Directory of Open Access Journals (Sweden)

    Harapan Harapan

    2017-04-01

    Full Text Available Objective: To determine the acceptance towards a hypothetical Ebola virus vaccine (EVV and associated factors in a non-affected country, Indonesia. Methods: A hospital-based, cross-sectional study was conducted in four regencies of Aceh, Indonesia. A set of pre-tested questionnaires was used to obtain information on acceptance towards EVV and a range of explanatory variables. Associations between EVV acceptance and explanatory variables were tested using multi-steps logistic regression analysis and the Spearman's rank correlation. Results: Participants who had knowledge on Ebola virus disease (EVD were 45.3% (192/424 and none of the participants achieved 80% correct answers on the knowledge regarding to EVD. About 73% of participants expressed their willingness to receive the EVV. Education attainment, occupation, monthly income, have heard regarding to EVD previously, socioeconomic level, attitude towards vaccination practice and knowledge regarding to EVD were associated significantly with acceptance towards EVV in univariate analysis (P < 0.05. In the final multivariate model, socio-economic level, attitude towards vaccination practice and knowledge regarding to EVD were the independent explanatory variables for EVV acceptance. Conclusions: The knowledge of EVD was low, but this minimally affected the acceptance towards EVV. However, to facilitate optimal uptake of EVV, dissemination of vaccine-related information prior to its introduction is required.

  1. Accepting or declining non-invasive ventilation or gastrostomy in amyotrophic lateral sclerosis: patients' perspectives.

    Science.gov (United States)

    Greenaway, L P; Martin, N H; Lawrence, V; Janssen, A; Al-Chalabi, A; Leigh, P N; Goldstein, L H

    2015-01-01

    The objective was to identify factors associated with decisions made by patients with amyotrophic lateral sclerosis (ALS) to accept or decline non-invasive ventilation (NIV) and/or gastrostomy in a prospective population-based study. Twenty-one people with ALS, recruited from the South-East ALS Register who made an intervention decision during the study timeframe underwent a face-to-face in-depth interview, with or without their informal caregiver present. Sixteen had accepted an intervention (11 accepted gastrostomy, four accepted NIV and one accepted both interventions). Five patients had declined gastrostomy. Thematic analysis revealed three main themes: (1) patient-centric factors (including perceptions of control, acceptance and need, and aspects of fear); (2) external factors (including roles played by healthcare professionals, family, and information provision); and (3) the concept of time (including living in the moment and the notion of 'right thing, right time'). Many aspects of these factors were inter-related. Decision-making processes for the patients were found to be complex and multifaceted and reinforce arguments for individualised (rather than 'algorithm-based') approaches to facilitating decision-making by people with ALS who require palliative interventions.

  2. Box-ticking and Olympic high jumping - Physicians' perceptions and acceptance of national physician validation systems.

    Science.gov (United States)

    Sehlbach, Carolin; Govaerts, Marjan J B; Mitchell, Sharon; Rohde, Gernot G U; Smeenk, Frank W J M; Driessen, Erik W

    2018-05-24

    National physician validation systems aim to ensure lifelong learning through periodic appraisals of physicians' competence. Their effectiveness is determined by physicians' acceptance of and commitment to the system. This study, therefore, sought to explore physicians' perceptions and self-reported acceptance of validation across three different physician validation systems in Europe. Using a constructivist grounded-theory approach, we conducted semi-structured interviews with 32 respiratory specialists from three countries with markedly different validation systems: Germany, which has a mandatory, credit-based system oriented to continuing professional development; Denmark, with mandatory annual dialogs and ensuing, non-compulsory activities; and the UK, with a mandatory, portfolio-based revalidation system. We analyzed interview data with a view to identifying factors influencing physicians' perceptions and acceptance. Factors that influenced acceptance were the assessment's authenticity and alignment of its requirements with clinical practice, physicians' beliefs about learning, perceived autonomy, and organizational support. Users' acceptance levels determine any system's effectiveness. To support lifelong learning effectively, national physician validation systems must be carefully designed and integrated into daily practice. Involving physicians in their design may render systems more authentic and improve alignment between individual ambitions and the systems' goals, thereby promoting acceptance.

  3. Consumers' acceptance of medicinal herbs: An application of the technology acceptance model (TAM).

    Science.gov (United States)

    Jokar, Nargesh Khatun; Noorhosseini, Seyyed Ali; Allahyari, Mohammad Sadegh; Damalas, Christos A

    2017-07-31

    The shift in consumers' preferences from synthetic to 'natural' products has led to a resurgence of interest in medicinal plants, particularly in developing countries. However, research data about consumers' preferences for particular products is hard to find. The main objective of this study was to contribute to the general understanding of consumers' intention for selecting medicinal herbs for consumption. Factors underpinning consumers' acceptance of medicinal herbs were studied with the technology acceptance model (TAM) in Rasht City of Iran using a structured questionnaire. Most respondents had low to moderate familiarity with consumption of medicinal herbs. However, about half of the respondents (47.5%) showed a high level of acceptance of medicinal herbs. Herbs like spearmint (Mentha spicata L.), spinach (Spinacia oleracea L.), basil (Ocimum basilicum L.), Damask rose (Rosa × damascena Herrm.), saffron (Crocus sativus L.), cinnamon (Cinnamomum verum J.Presl), flixweed [Descurainia sophia (L.) Webb ex Prantl], red feathers (Echium amoenum Fisch. & C.A.Mey.), and green tea [Camellia sinensis (L.) Kuntze] had the highest consumption rate among the majority (over 75%) of citizens of Rasht. The highest rate of perceived usefulness of medicinal herbs was related to their perceived role in healing diseases. The variable of importance of use of medicinal herbs had the strongest direct effect and the variables of perceived usefulness and attitude towards use had the second and third strongest direct effect on the acceptance of medicinal herbs' use at p acceptance of medicinal herbs and may serve as a benchmark for future research and evaluation concerning the use of medicinal herbs over time. For plant producers, more effective and targeted crop development should be encouraged, whereas for retailers better marketing and delivery strategies should be sought. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

  4. 5 CFR 531.409 - Acceptable level of competence determinations.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Acceptable level of competence... REGULATIONS PAY UNDER THE GENERAL SCHEDULE Within-Grade Increases § 531.409 Acceptable level of competence... delegated shall determine which employees are performing at an acceptable level of competence. (b) Basis for...

  5. Nuclear power project construction quality acceptance standards Implementation and discussion

    International Nuclear Information System (INIS)

    Lai Shifu

    2013-01-01

    Project quality construction acceptance is an important element of nuclear power project quality management. Based on characteristics of NPP construction and refer to national construction quality acceptance code and industry regulation, this paper introduces and discusses NPP construction quality acceptance regulation improvement and implementation under current situation. (authors)

  6. 75 FR 51058 - Web-Distributed Labeling User Acceptance Pilot

    Science.gov (United States)

    2010-08-18

    ... Acceptance Pilot AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: EPA's Office of...- distributed labeling ``User Acceptance Pilot'' and is soliciting interest from entities potentially willing to participate in this pilot program. Through the User Acceptance Pilot, EPA intends to demonstrate how users...

  7. 48 CFR 28.203 - Acceptability of individual sureties.

    Science.gov (United States)

    2010-10-01

    ... individual sureties. 28.203 Section 28.203 Federal Acquisition Regulations System FEDERAL ACQUISITION... Acceptability of individual sureties. (a) An individual surety is acceptable for all types of bonds except position schedule bonds. The contracting officer shall determine the acceptability of individuals proposed...

  8. Religiosity, Religious Acceptance, Social Interaction, and Satisfaction with University Experience

    Science.gov (United States)

    Mohebpour, Ida; Reysen, Stephen; Gibson, Shonda; Hendricks, LaVelle

    2017-01-01

    We tested a mediated moderation model with the interaction of students' degree of religiosity and perception of the university environment as accepting of one's religion predicting satisfaction with the university mediated by positive social relations. When the university was perceived as accepting of one's religion (vs less accepting), greater…

  9. Measuring and Promoting Acceptance of Young Children with Disabilities.

    Science.gov (United States)

    Favazza, Paddy C.; Phillipsen, Leslie; Kumar, Poonam

    2000-01-01

    Results of two studies indicate the Acceptance Scale for Kindergartners was reliable with a sample of minority, low socioeconomic status children and that children exposed to all of the components of an intervention designed to promote acceptance of young children with disabilities had short-term and long-term gains in acceptance. (Contains…

  10. 12 CFR 210.8 - Presenting noncash items for acceptance.

    Science.gov (United States)

    2010-01-01

    ... for acceptance. (a) A Reserve Bank or a subsequent collecting bank may, if instructed by the sender, present a noncash item for acceptance in any manner authorized by law if— (1) The item provides that it... 12 Banks and Banking 2 2010-01-01 2010-01-01 false Presenting noncash items for acceptance. 210.8...

  11. Evaluation of User Acceptance of Mixed Reality Technology

    Science.gov (United States)

    Yusoff, Rasimah Che Mohd; Zaman, Halimah Badioze; Ahmad, Azlina

    2011-01-01

    This study investigates users' perception and acceptance of mixed reality (MR) technology. Acceptance of new information technologies has been important research area since 1990s. It is important to understand the reasons why people accept information technologies, as this can help to improve design, evaluation and prediction how users will…

  12. Social Acceptance of Wind: A Brief Overview (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, E.

    2015-01-01

    This presentation discusses concepts and trends in social acceptance of wind energy, profiles recent research findings, and discussions mitigation strategies intended to resolve wind power social acceptance challenges as informed by published research and the experiences of individuals participating in the International Energy Agencies Working Group on Social Acceptance of Wind Energy

  13. 19 CFR 172.32 - Authority to accept offers.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Authority to accept offers. 172.32 Section 172.32 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE....32 Authority to accept offers. The authority to accept offers in compromise, subject to the...

  14. Deans in German Universities: Goal Acceptance and Task Characteristics

    Science.gov (United States)

    Scholkmann, Antonia

    2011-01-01

    This paper presents an empirical study which explored how deans at German universities accept their new role as manager, and which factors influence the acceptance of this role. Within a framework referring to Locke and Latham's goal setting theory, the acceptance of operative goals implemented in the faculties served as an indicator of how well…

  15. Exposure to Pornography and Acceptance of Rape Myths.

    Science.gov (United States)

    Allen, Mike; And Others

    1995-01-01

    Summarizes the literature examining the association between acceptance of rape myths and exposure to pornography. States that nonexperimental methodology shows that exposure to pornography does not increase rape myth acceptance, while experimental studies show that exposure to pornography increases rape myth acceptance. Concludes that experimental…

  16. Transport, acceptance, storage and handling of the itens of nuclear power plants

    International Nuclear Information System (INIS)

    1989-01-01

    The norm aiming to establish the requirements applied to workers or organizations which participate of the activities of transport, acceptance, storage and handling of important itens for safety of nuclear power plants, is presented. The established requirements treat of protection and control necessary to assure that the quality of important itens for safety be it preserved from the end of fabrication until their incorporation to nuclear power plant. (M.C.K.) [pt

  17. Public Acceptance for Geological CO2-Storage

    Science.gov (United States)

    Schilling, F.; Ossing, F.; Würdemann, H.; Co2SINK Team

    2009-04-01

    Public acceptance is one of the fundamental prerequisites for geological CO2 storage. In highly populated areas like central Europe, especially in the vicinity of metropolitan areas like Berlin, underground operations are in the focus of the people living next to the site, the media, and politics. To gain acceptance, all these groups - the people in the neighbourhood, journalists, and authorities - need to be confident of the security of the planned storage operation as well as the long term security of storage. A very important point is to show that the technical risks of CO2 storage can be managed with the help of a proper short and long term monitoring concept, as well as appropriate mitigation technologies e.g adequate abandonment procedures for leaking wells. To better explain the possible risks examples for leakage scenarios help the public to assess and to accept the technical risks of CO2 storage. At Ketzin we tried the following approach that can be summed up on the basis: Always tell the truth! This might be self-evident but it has to be stressed that credibility is of vital importance. Suspiciousness and distrust are best friends of fear. Undefined fear seems to be the major risk in public acceptance of geological CO2-storage. Misinformation and missing communication further enhance the denial of geological CO2 storage. When we started to plan and establish the Ketzin storage site, we ensured a forward directed communication. Offensive information activities, an information centre on site, active media politics and open information about the activities taking place are basics. Some of the measures were: - information of the competent authorities through meetings (mayor, governmental authorities) - information of the local public, e.g. hearings (while also inviting local, regional and nation wide media) - we always treated the local people and press first! - organizing of bigger events to inform the public on site, e.g. start of drilling activities (open

  18. Scholarship for Nuclear Communications and Methods for Evaluation of Nuclear Project Acceptability

    Energy Technology Data Exchange (ETDEWEB)

    Golay, Michael [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2016-10-30

    This project aims to go beyond effective communication in understanding how to design nuclear enterprise projects that will gain stakeholder acceptability. Much of what we are studying is generally applicable to controversial projects, and we expect our results to be of broad value beyond the nuclear arena. Acceptability is more than effective communication; it also requires varying degrees of engagement with a disparate number of stakeholder groups. In the nuclear enterprise, previous attempts have been well designed physically (i.e., technologically sound), but have floundered by being insensitive concerning acceptance. Though effective communication is a necessary, but insufficient, condition for such success, there is a lack of scholarship regarding how to gain stakeholder acceptance for new controversial projects, including nuclear ones. Our work is building a model for use in assessing the performance of a project in the area of acceptability. In the nuclear-social nexus, gaining acceptance requires a clear understanding of factors regarded as being important by the many stakeholders that are common to new nuclear project (many of whom hold an effective veto power). Projects tend to become socially controversial when public beliefs, expert opinion and decision-maker understanding are misaligned. As such, stakeholder acceptance is hypothesized as both an ongoing process and an initial project design parameter comprised of complex, social, cognitive and technical components. Controversial projects may be defined as aspects of modern technologies that some people question, or are cautious about. They could range from genetic modifications, biological hazards, effects of chemical agents, nuclear radiation or hydraulic fracturing operations. We intend that our work will result in a model likely to be valuable for refining project design and implementation to increase the knowledge needed for successful management of stakeholder relationships.

  19. Developing a Stoma Acceptance Questionnaire to improve motivation to adhere to enterostoma self-care.

    Science.gov (United States)

    Bagnasco, A; Watson, R; Zanini, M; Catania, G; Aleo, G; Sasso, L

    2017-06-01

    In stoma care, patient education is often weak in terms of improving patients' level of acceptance of living with a stoma. Self-care educational interventions in enterostomal patients, which according to Orem's Theory should take into account these patients' specific needs, require instruments that measure patients' stoma acceptance to improve motivation based on the resumption of activities they used to carry out before having a stoma. The aim of the study was to develop an instrument that measures the level of stoma acceptance to improve motivation to adhere to enterostoma self-care. Aspects that improve stoma acceptance and consequently motivation to adhere to enterostoma self-care were identified through 10 focus groups. In the focus groups, the motivation indicators were grouped, categorised and results entered into a Stoma Acceptance Questionnaire (SAQ). The SAQ was then piloted with 104 enterostomal patients from three general hospitals. To assess the construct validity of the SAQ, Mokken Scaling was used to explore the latent structure of the SAQ. Mokken scaling is a non-parametric method that falls under the umbrella of methods described as item response theories (IRT). The theme "Living with a stoma"; "Autonomy"; "Support"; "Ability to deal with stoma", plus a common underlying theme: "Stoma acceptance" were dissussed by the Focus Groups. The experts identified the items of the (SAQ) through these themes. Mokken Scaling identified the "resumption of enterostomal patients' normal activities" as a measure of stoma acceptance, thus confirming the construct validity of the SAQ. The tool proposed affords a pioneering example of how this gap can be bridged. Indeed, the SAQ could enable nurses adopting a standardized approach for the assessment of enterostomal patients' motivation to resume their normal activities and identify needs linked to this. The SAQ could also be used to measure the effectiveness of psychosocial and educational interventions aimed at

  20. Safety of magnetic fusion facilities: Requirements

    International Nuclear Information System (INIS)

    1996-05-01

    This Standard identifies safety requirements for magnetic fusion facilities. Safety functions are used to define outcomes that must be achieved to ensure that exposures to radiation, hazardous materials, or other hazards are maintained within acceptable limits. Requirements applicable to magnetic fusion facilities have been derived from Federal law, policy, and other documents. In addition to specific safety requirements, broad direction is given in the form of safety principles that are to be implemented and within which safety can be achieved