Rapid Prototyping Human Interfaces Using Stretchable Strain Sensor

Directory of Open Access Journals (Sweden)

Tokiya Yamaji

2017-01-01

Full Text Available In the modern society with a variety of information electronic devices, human interfaces increase their importance in a boundary of a human and a device. In general, the human is required to get used to the device. Even if the device is designed as a universal device or a high-usability device, the device is not suitable for all users. The usability of the device depends on the individual user. Therefore, personalized and customized human interfaces are effective for the user. To create customized interfaces, we propose rapid prototyping human interfaces using stretchable strain sensors. The human interfaces comprise parts formed by a three-dimensional printer and the four strain sensors. The three-dimensional printer easily makes customized human interfaces. The outputs of the interface are calculated based on the sensor’s lengths. Experiments evaluate three human interfaces: a sheet-shaped interface, a sliding lever interface, and a tilting lever interface. We confirm that the three human interfaces obtain input operations with a high accuracy.

Advanced human-system interface design review guidelines

International Nuclear Information System (INIS)

O'Hara, J.M.

1990-01-01

Advanced, computer-based, human-system interface designs are emerging in nuclear power plant (NPP) control rooms. These developments may have significant implications for plant safety in that they will greatly affect the ways in which operators interact with systems. At present, however, the only guidance available to the US Nuclear Regulatory Commission (NRC) for the review of control room-operator interfaces, NUREG-0700, was written prior to these technological changes and is thus not designed to address them. The objective of the project reported in this paper is to develop an Advanced Control Room Design Review Guideline for use in performing human factors reviews of advanced operator interfaces. This guideline will be implemented, in part, as a portable, computer-based, interactive document for field use. The paper describes the overall guideline development methodology, the present status of the document, and the plans for further guideline testing and development. 21 refs., 3 figs

User Interface Aspects of a Human-Hand Simulation System

Directory of Open Access Journals (Sweden)

Beifang Yi

2005-10-01

Full Text Available This paper describes the user interface design for a human-hand simulation system, a virtual environment that produces ground truth data (life-like human hand gestures and animations and provides visualization support for experiments on computer vision-based hand pose estimation and tracking. The system allows users to save time in data generation and easily create any hand gestures. We have designed and implemented this user interface with the consideration of usability goals and software engineering issues.

Human-system interface for CAREM nuclear reactor

International Nuclear Information System (INIS)

Abaurre, Norberto F.; Flury, Celso A.; Pierini, Juan P.; Etchepareborda, Andres; Breitembuecher, Alfredo J.; Lema, Fabian M.

2009-01-01

Associated with activities to be developed by our working group on the construction of the reactor training simulator for the CAREM, we have planned the design of human-system interface (HSI) of the main control room. The goal of this study is to describe the planning and methodology used for the HSI interface design. The products of this process are the layout specifications of the Control Room and the screens specifications for control software. (author)

Advanced human-system interface design review guidelines

International Nuclear Information System (INIS)

O'Hara, J.M.

1990-01-01

Advanced, computer-based, human-system interface designs are emerging in nuclear power plant control rooms as a result of several factors. These include: (1) incorporation of new systems such as safety parameter display systems, (2) backfitting of current control rooms with new technologies when existing hardware is no longer supported by equipment vendors, and (3) development of advanced control room concepts. Control rooms of the future will be developed almost exclusively with advanced instrumentation and controls based upon digital technology. In addition, the control room operator will be interfacing with more intelligent systems which will be capable of providing information processing support to the operator. These developments may have significant implications for plant safety in that they will greatly affect the operator's role in the system as well as the ways in which he interacts with it. At present, however, the only guidance available to the Nuclear Regulatory Commission (NRC) for the review of control room-operator interfaces is NUREG-0700. It is a document which was written prior to these technological changes and is, therefore, tailored to the technologies used in traditional control rooms. Thus, the present guidance needs to be updated since it is inadequate to serve as the basis for NRC staff review of such advanced or hybrid control room designs. The objective of the project reported in this paper is to develop an Advanced Control Room Design Review Guideline suitable for use in performing human factors reviews of advanced operator interfaces. This guideline will take the form of a portable, interactive, computer-based document that may be conveniently used by an inspector in the field, as well as a text-based document

US NDC Modernization Iteration E1 Prototyping Report: Common Object Interface

Energy Technology Data Exchange (ETDEWEB)

Lewis, Jennifer E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hess, Michael M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2014-12-01

During the first iteration of the US NDC Modernization Elaboration phase (E1), the SNL US NDC modernization project team completed an initial survey of applicable COTS solutions, and established exploratory prototyping related to the Common Object Interface (COI) in support of system architecture definition. This report summarizes these activities and discusses planned follow-on work.

US NDC Modernization Iteration E1 Prototyping Report: User Interface Framework

Energy Technology Data Exchange (ETDEWEB)

Lober, Randall R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2014-12-01

During the first iteration of the US NDC Modernization Elaboration phase (E1), the SNL US NDC modernization project team completed an initial survey of applicable COTS solutions, and established exploratory prototyping related to the User Interface Framework (UIF) in support of system architecture definition. This report summarizes these activities and discusses planned follow-on work.

Human factors engineering plan for reviewing nuclear plant modernization programs

International Nuclear Information System (INIS)

O'Hara, John; Higgins, James

2004-12-01

The Swedish Nuclear Power Inspectorate reviews the human factors engineering (HFE) aspects of nuclear power plants (NPPs) involved in the modernization of the plant systems and control rooms. The purpose of a HFE review is to help ensure personnel and public safety by verifying that accepted HFE practices and guidelines are incorporated into the program and nuclear power plant design. Such a review helps to ensure the HFE aspects of an NPP are developed, designed, and evaluated on the basis of a structured top-down system analysis using accepted HFE principles. The review addresses eleven HFE elements: HFE Program Management, Operating Experience Review, Functional Requirements Analysis and Allocation, Task Analysis, Staffing, Human Reliability Analysis, Human-System Interface Design, Procedure Development, Training Program Development, Human Factors Verification and Validation, and Design Implementation

Human factors engineering plan for reviewing nuclear plant modernization programs

Energy Technology Data Exchange (ETDEWEB)

O' Hara, John; Higgins, James [Brookhaven National Laboratory, Upton, NY (United States)

2004-12-01

The Swedish Nuclear Power Inspectorate reviews the human factors engineering (HFE) aspects of nuclear power plants (NPPs) involved in the modernization of the plant systems and control rooms. The purpose of a HFE review is to help ensure personnel and public safety by verifying that accepted HFE practices and guidelines are incorporated into the program and nuclear power plant design. Such a review helps to ensure the HFE aspects of an NPP are developed, designed, and evaluated on the basis of a structured top-down system analysis using accepted HFE principles. The review addresses eleven HFE elements: HFE Program Management, Operating Experience Review, Functional Requirements Analysis and Allocation, Task Analysis, Staffing, Human Reliability Analysis, Human-System Interface Design, Procedure Development, Training Program Development, Human Factors Verification and Validation, and Design Implementation.

Activities of IAEA related to human interface in man-machine system

International Nuclear Information System (INIS)

Nishiwaki, Yasushi

1988-01-01

The present paper outlines some activities of IAEA related to human interface in man-machine systems. It has been recognized for quite some time that in large and complex man-machine interactive systems human errors can contribute substantially to failures of these systems, and that the improvement in the human interface in man-machine systems is essential for the safety of the plant. Many important surveys have been made in some member countries. These studies and operational experience have shown that it is possible to substantially reduce this adverse impact of human errors in nuclear power plant operations by the application of human factors technology. This technology. This technology includes: (1) selection of people with the requisite skills and knowledge and providing them with job-relevant training, (2) maintenance of the necessary job qualifications for each person in the plant, (3) design of man-machine interfaces which are fully compatible with the capabilities and limitations of the people in the system, and (4) design of job operations, including written materials, to facilitate required quality of human performance. A review is made of education/training, operator support systems, human error data collection, analysis of safety significant events and future activities. (Nogami, K.)

Ecological Design of Cooperative Human-Machine Interfaces for Safety of Intelligent Transport Systems

Directory of Open Access Journals (Sweden)

Orekhov Aleksandr

2016-01-01

Full Text Available The paper describes research results in the domain of cooperative intelligent transport systems. The requirements for human-machine interface considering safety issue of for intelligent transport systems (ITSare analyzed. Profiling of the requirements to cooperative human-machine interface (CHMI for such systems including requirements to usability and safety is based on a set of standards for ITSs. An approach and design technique of cooperative human-machine interface for ITSs are suggested. The architecture of cloud-based CHMI for intelligent transport systems has been developed. The prototype of software system CHMI4ITSis described.

Principle of human system interface (HSI) design for new reactor console of PUSPATI TRIGA Reactor (RTP)

International Nuclear Information System (INIS)

Zareen Khan Abdul Jalil Khan; Ridzuan Abdul Mutalib; Mohd Idris Taib; Mohd Khairulezwan Abdul Manan; Nurfarhana Ayuni Joha; Mohd Sabri Minhat; Izhar Abu Hussin

2013-01-01

Full-text: This paper will describe the principle of human system interface design for new reactor console in control room at TRIGA reactor facility. In order to support these human system interface challenges in digital reactor console. Software-based instrumentation and control (I and C) system for new reactor console could lead to new human machine integration. The proposed of Human System Interface (HSI) which included the large display panels which shows reactor status, compact and computer-based workstations for monitoring, control and protection function. The proposed Human System Interface (HIS) has been evaluated using various human factor engineering. It can be concluded that the Human System Interface (HIS) is designed as to address the safety related computer controlled system. (author)

Design Concept of Human Interface System for Risk Monitoring for Proactive Trouble Prevention

Energy Technology Data Exchange (ETDEWEB)

Yoshikawa, Hidekazu; Yang, Ming; Zhang, Zhijian; Hashim, Muhammad [Harbin Engineering University, Harbin (China); Lind, Morten [Technical University of Denmark, Kongens Lyngby (Djibouti); Tamayama, Kiyoshi; Okusa, Kyoichi [Japan Atomic Energy Agency, Tsuruga (Japan)

2011-08-15

A new concept is first proposed of distributed human interface system to integrate both operation and maintenance of nuclear power plant. Then, a method of constructing human interface system is introduced by integrating the plant knowledge database system based on Multilevel Flow Model (MFM) with the risk monitor to watch Defense-in Depth plant safety functions. The proposed concept is applied for a liquid metal fast reactor Monju and necessary R and D subjects are reviewed to realize human interface system for the maintenance work in Monju plant. Because of using high temperature liquid sodium as reactor coolant in Monju plant, the maintenance for Monju should utilize more automated equipment of remote control and robotics than that of light water reactor. It is necessary to design optimum task allocation between human and automated machine as the requisites for good communication design of human interface systems to support the collaboration work between workers at local workplace and the main control room. In this paper, the general issues are reviewed on how to configure the whole human interface system for helping proactive trouble prevention and risk evaluation on the basis of the presented target plant model before the concrete proposition of the hardware and software systems development to be used by both the staffs of operation and maintenance of NPP.

Design Concept of Human Interface System for Risk Monitoring for Proactive Trouble Prevention

International Nuclear Information System (INIS)

Yoshikawa, Hidekazu; Yang, Ming; Zhang, Zhijian; Hashim, Muhammad; Lind, Morten; Tamayama, Kiyoshi; Okusa, Kyoichi

2011-01-01

A new concept is first proposed of distributed human interface system to integrate both operation and maintenance of nuclear power plant. Then, a method of constructing human interface system is introduced by integrating the plant knowledge database system based on Multilevel Flow Model (MFM) with the risk monitor to watch Defense-in Depth plant safety functions. The proposed concept is applied for a liquid metal fast reactor Monju and necessary R and D subjects are reviewed to realize human interface system for the maintenance work in Monju plant. Because of using high temperature liquid sodium as reactor coolant in Monju plant, the maintenance for Monju should utilize more automated equipment of remote control and robotics than that of light water reactor. It is necessary to design optimum task allocation between human and automated machine as the requisites for good communication design of human interface systems to support the collaboration work between workers at local workplace and the main control room. In this paper, the general issues are reviewed on how to configure the whole human interface system for helping proactive trouble prevention and risk evaluation on the basis of the presented target plant model before the concrete proposition of the hardware and software systems development to be used by both the staffs of operation and maintenance of NPP

Perspective of next generation training system from the viewpoints of human interfaces. Human interface kara mita kyoiku kunren system no genjo to kongo no tenbo

Energy Technology Data Exchange (ETDEWEB)

Nishida, S [Mitsubishi Electric Corp., Tokyo (Japan)

1992-12-10

This paper describes an education and training system placing its emphasis on human interfaces. The paper indicates that the currently used education and training systems lack training functions to cultivate knowledge-based judgment abilities that can find adequate solutions to events that have not been experienced previously; such judgments require deep understanding on the objects; and this training requires a system to aid the comprehension based on knowledges in the realm of recognition science for the 'human understanding'. Next, a pedagogical interface is proposed for aiding the comprehension. The paper enumerates functions indispensable for the comprehension including setting the 'loop for representation and examination', aiding the representation to examination loop, aiding roles by others, and realizing interactions through a hypothetical world. Also enumerated as fundamental techniques to structure such interface are information structuring techniques, groupware techniques, and virtual reality techniques. 19 refs., 10 figs.

Study and application of human reliability analysis for digital human-system interface

International Nuclear Information System (INIS)

Jia Ming; Liu Yanzi; Zhang Jianbo

2014-01-01

The knowledge of human-orientated abilities and limitations could be used to digital human-system interface (HSI) design by human reliability analysis (HRA) technology. Further, control room system design could achieve the perfect match of man-machine-environment. This research was conducted to establish an integrated HRA method. This method identified HSI potential design flaws which may affect human performance and cause human error. Then a systematic approach was adopted to optimize HSI. It turns out that this method is practical and objective, and effectively improves the safety, reliability and economy of nuclear power plant. This method was applied to CRP1000 projects under construction successfully with great potential. (authors)

Design and Evaluation of Human System Interfaces (HSIs)

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

In the safe operation of nuclear power plants and other complex process industries the performance of the control room crews plays an important role. In this respect a well-functioning and well-designed Human-System Interface (HSI) is crucial for safe and efficient operation of the plant. It is therefore essential that the design, development and evaluation of both control rooms and HSI-solutions are conducted in a well-structured way, applying sound human factors principles and guidelines in all phases of the HSI development process. Many nuclear power plants around the world are currently facing major modernisation of their control rooms. In this process computerised, screen-based HSIs replace old conventional operator interfaces. In new control rooms, both in the nuclear field and in other process industries, fully digital, screen-based control rooms are becoming the standard. It is therefore of particular importance to address the design and evaluation of screen-based HSIs in a systematic and consistent way in order to arrive at solutions which take proper advantage of the possibilities for improving operator support through the use of digital, screen-based HSIs, at the same time avoiding pitfalls and problems in the use of this technology. The Halden Reactor Project, in cooperation with the OECD Nuclear Energy Agency, organised an International Summer School on ''Design and Evaluation of Human-System Interfaces (HSIs)'' in Halden, Norway in the period August 25th - 29th, 2003. The Summer School addressed the different steps in design, development and evaluation of HSIs, and the human factors principles, standards and guidelines which should be followed in this process. The lectures comprised both theoretical background, as well as examples of good and bad HSI design, thereby providing practical advice in design and evaluation of operator interfaces and control room solutions to the participants in the Summer School. This CD contains the

Design and Evaluation of Human System Interfaces (HSIs)

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

In the safe operation of nuclear power plants and other complex process industries the performance of the control room crews plays an important role. In this respect a well-functioning and well-designed Human-System Interface (HSI) is crucial for safe and efficient operation of the plant. It is therefore essential that the design, development and evaluation of both control rooms and HSI-solutions are conducted in a well-structured way, applying sound human factors principles and guidelines in all phases of the HSI development process. Many nuclear power plants around the world are currently facing major modernisation of their control rooms. In this process computerised, screen-based HSIs replace old conventional operator interfaces. In new control rooms, both in the nuclear field and in other process industries, fully digital, screen-based control rooms are becoming the standard. It is therefore of particular importance to address the design and evaluation of screen-based HSIs in a systematic and consistent way in order to arrive at solutions which take proper advantage of the possibilities for improving operator support through the use of digital, screen-based HSIs, at the same time avoiding pitfalls and problems in the use of this technology. The Halden Reactor Project, in cooperation with the OECD Nuclear Energy Agency, organised an International Summer School on ''Design and Evaluation of Human-System Interfaces (HSIs)'' in Halden, Norway in the period August 25th - 29th, 2003. The Summer School addressed the different steps in design, development and evaluation of HSIs, and the human factors principles, standards and guidelines which should be followed in this process. The lectures comprised both theoretical background, as well as examples of good and bad HSI design, thereby providing practical advice in design and evaluation of operator interfaces and control room solutions to the participants in the Summer School. This CD contains the Proceedings of the

Design and Evaluation of Human System Interfaces (HSIs)

International Nuclear Information System (INIS)

2003-01-01

In the safe operation of nuclear power plants and other complex process industries the performance of the control room crews plays an important role. In this respect a well-functioning and well-designed Human-System Interface (HSI) is crucial for safe and efficient operation of the plant. It is therefore essential that the design, development and evaluation of both control rooms and HSI-solutions are conducted in a well-structured way, applying sound human factors principles and guidelines in all phases of the HSI development process. Many nuclear power plants around the world are currently facing major modernisation of their control rooms. In this process computerised, screen-based HSIs replace old conventional operator interfaces. In new control rooms, both in the nuclear field and in other process industries, fully digital, screen-based control rooms are becoming the standard. It is therefore of particular importance to address the design and evaluation of screen-based HSIs in a systematic and consistent way in order to arrive at solutions which take proper advantage of the possibilities for improving operator support through the use of digital, screen-based HSIs, at the same time avoiding pitfalls and problems in the use of this technology. The Halden Reactor Project, in cooperation with the OECD Nuclear Energy Agency, organised an International Summer School on ''Design and Evaluation of Human-System Interfaces (HSIs)'' in Halden, Norway in the period August 25th - 29th, 2003. The Summer School addressed the different steps in design, development and evaluation of HSIs, and the human factors principles, standards and guidelines which should be followed in this process. The lectures comprised both theoretical background, as well as examples of good and bad HSI design, thereby providing practical advice in design and evaluation of operator interfaces and control room solutions to the participants in the Summer School. This CD contains the Proceedings of the

Modern Human Engineering

International Nuclear Information System (INIS)

Jeong, Byeong Yong; Lee Dong Kyeong

2005-08-01

These are the titles of each chapter. They are as in the following; design of human-centerdness, human machine system, information processing process, sense of human, user interface, elements of human body, vital dynamics, measurement of reaction of human body, estimation and management of working environment, mental characteristic of human, human error, group, organization and leadership, safety supervision, process analysis, time studying, work sampling, work factor and methods time measurement, introduction of muscular skeletal disease and program of preventive management.

Modern Human Engineering

Energy Technology Data Exchange (ETDEWEB)

Jeong, Byeong Yong; Lee Dong Kyeong

2005-08-15

These are the titles of each chapter. They are as in the following; design of human-centerdness, human machine system, information processing process, sense of human, user interface, elements of human body, vital dynamics, measurement of reaction of human body, estimation and management of working environment, mental characteristic of human, human error, group, organization and leadership, safety supervision, process analysis, time studying, work sampling, work factor and methods time measurement, introduction of muscular skeletal disease and program of preventive management.

Human factors evaluation of teletherapy: Human-system interfaces and procedures. Volume 3

International Nuclear Information System (INIS)

Kaye, R.D.; Henriksen, K.; Jones, R.; Morisseau, D.S.; Serig, D.I.

1995-07-01

A series of human factors evaluations was undertaken to better understand the contributing factors to human error in the teletherapy environment. Teletherapy is a multidisciplinary methodology for treating cancerous tissue through selective exposure to an external beam of ionizing radiation. The principal sources of radiation are a radioactive isotope, typically cobalt60 (Co-60), or a linear accelerator device capable of producing very high energy x-ray and electron beams. A team of human factors specialists conducted site visits to radiation oncology departments at community hospitals, university centers, and free-standing clinics. In addition, a panel of radiation oncologists, medical physicists, and radiation technologists served as subject matter experts. A function and task analysis was initially performed to guide subsequent evaluations in the areas of user-system interfaces, procedures, training and qualifications, and organizational policies and practices. The present report focuses on an evaluation of the human-system interfaces in relation to the treatment machines and supporting equipment (e.g., simulators, treatment planning computers, control consoles, patient charts) found in the teletherapy environment. The report also evaluates operating, maintenance and emergency procedures and practices involved in teletherapy. The evaluations are based on the function and task analysis and established human engineering guidelines, where applicable

Human factors evaluation of teletherapy: Human-system interfaces and procedures. Volume 3

Energy Technology Data Exchange (ETDEWEB)

Kaye, R.D.; Henriksen, K.; Jones, R. [Hughes Training, Inc., Falls Church, VA (United States); Morisseau, D.S.; Serig, D.I. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Systems Technology

1995-07-01

A series of human factors evaluations was undertaken to better understand the contributing factors to human error in the teletherapy environment. Teletherapy is a multidisciplinary methodology for treating cancerous tissue through selective exposure to an external beam of ionizing radiation. The principal sources of radiation are a radioactive isotope, typically cobalt60 (Co-60), or a linear accelerator device capable of producing very high energy x-ray and electron beams. A team of human factors specialists conducted site visits to radiation oncology departments at community hospitals, university centers, and free-standing clinics. In addition, a panel of radiation oncologists, medical physicists, and radiation technologists served as subject matter experts. A function and task analysis was initially performed to guide subsequent evaluations in the areas of user-system interfaces, procedures, training and qualifications, and organizational policies and practices. The present report focuses on an evaluation of the human-system interfaces in relation to the treatment machines and supporting equipment (e.g., simulators, treatment planning computers, control consoles, patient charts) found in the teletherapy environment. The report also evaluates operating, maintenance and emergency procedures and practices involved in teletherapy. The evaluations are based on the function and task analysis and established human engineering guidelines, where applicable.

Design Concept of Human Interface System for Risk Monitoring for Proactive Trouble Prevention

DEFF Research Database (Denmark)

Hidekazu, Yoshikawa; Ming, Yang; Zhijian, Zhang

2011-01-01

interface systems to support the collaboration work between workers at local workplace and the main control room. In this paper, the general issues are reviewed on how to configure the whole human interface system for helping proactive trouble prevention and risk evaluation on the basis of the presented......) with the risk monitor to watch Defense-in Depth plant safety functions. The proposed concept is applied for a liquid metal fast reactor Monju and necessary R&D subjects are reviewed to realize human interface system for the maintenance work in Monju plant. Because of using high temperature liquid sodium...... as reactor coolant in Monju plant, the maintenance for Monju should utilize more automated equipments of remote control and robotics than that of light water reactor. It is necessary to design optimum task allocation between human and automated machine as the requisites for good communication design of human...

A meta-analysis of human-system interfaces in unmanned aerial vehicle (UAV) swarm management.

Science.gov (United States)

Hocraffer, Amy; Nam, Chang S

2017-01-01

A meta-analysis was conducted to systematically evaluate the current state of research on human-system interfaces for users controlling semi-autonomous swarms composed of groups of drones or unmanned aerial vehicles (UAVs). UAV swarms pose several human factors challenges, such as high cognitive demands, non-intuitive behavior, and serious consequences for errors. This article presents findings from a meta-analysis of 27 UAV swarm management papers focused on the human-system interface and human factors concerns, providing an overview of the advantages, challenges, and limitations of current UAV management interfaces, as well as information on how these interfaces are currently evaluated. In general allowing user and mission-specific customization to user interfaces and raising the swarm's level of autonomy to reduce operator cognitive workload are beneficial and improve situation awareness (SA). It is clear more research is needed in this rapidly evolving field. Copyright © 2016 Elsevier Ltd. All rights reserved.

Human performance interfaces in air traffic control.

Science.gov (United States)

Chang, Yu-Hern; Yeh, Chung-Hsing

2010-01-01

This paper examines how human performance factors in air traffic control (ATC) affect each other through their mutual interactions. The paper extends the conceptual SHEL model of ergonomics to describe the ATC system as human performance interfaces in which the air traffic controllers interact with other human performance factors including other controllers, software, hardware, environment, and organisation. New research hypotheses about the relationships between human performance interfaces of the system are developed and tested on data collected from air traffic controllers, using structural equation modelling. The research result suggests that organisation influences play a more significant role than individual differences or peer influences on how the controllers interact with the software, hardware, and environment of the ATC system. There are mutual influences between the controller-software, controller-hardware, controller-environment, and controller-organisation interfaces of the ATC system, with the exception of the controller-controller interface. Research findings of this study provide practical insights in managing human performance interfaces of the ATC system in the face of internal or external change, particularly in understanding its possible consequences in relation to the interactions between human performance factors.

Human-machine interface for a VR-based medical imaging environment

Science.gov (United States)

Krapichler, Christian; Haubner, Michael; Loesch, Andreas; Lang, Manfred K.; Englmeier, Karl-Hans

1997-05-01

Modern 3D scanning techniques like magnetic resonance imaging (MRI) or computed tomography (CT) produce high- quality images of the human anatomy. Virtual environments open new ways to display and to analyze those tomograms. Compared with today's inspection of 2D image sequences, physicians are empowered to recognize spatial coherencies and examine pathological regions more facile, diagnosis and therapy planning can be accelerated. For that purpose a powerful human-machine interface is required, which offers a variety of tools and features to enable both exploration and manipulation of the 3D data. Man-machine communication has to be intuitive and efficacious to avoid long accustoming times and to enhance familiarity with and acceptance of the interface. Hence, interaction capabilities in virtual worlds should be comparable to those in the real work to allow utilization of our natural experiences. In this paper the integration of hand gestures and visual focus, two important aspects in modern human-computer interaction, into a medical imaging environment is shown. With the presented human- machine interface, including virtual reality displaying and interaction techniques, radiologists can be supported in their work. Further, virtual environments can even alleviate communication between specialists from different fields or in educational and training applications.

Effects of digital human-machine interface characteristics on human error in nuclear power plants

International Nuclear Information System (INIS)

Li Pengcheng; Zhang Li; Dai Licao; Huang Weigang

2011-01-01

In order to identify the effects of digital human-machine interface characteristics on human error in nuclear power plants, the new characteristics of digital human-machine interface are identified by comparing with the traditional analog control systems in the aspects of the information display, user interface interaction and management, control systems, alarm systems and procedures system, and the negative effects of digital human-machine interface characteristics on human error are identified by field research and interviewing with operators such as increased cognitive load and workload, mode confusion, loss of situation awareness. As to the adverse effects related above, the corresponding prevention and control measures of human errors are provided to support the prevention and minimization of human errors and the optimization of human-machine interface design. (authors)

Visualization tool for human-machine interface designers

Science.gov (United States)

Prevost, Michael P.; Banda, Carolyn P.

1991-06-01

As modern human-machine systems continue to grow in capabilities and complexity, system operators are faced with integrating and managing increased quantities of information. Since many information components are highly related to each other, optimizing the spatial and temporal aspects of presenting information to the operator has become a formidable task for the human-machine interface (HMI) designer. The authors describe a tool in an early stage of development, the Information Source Layout Editor (ISLE). This tool is to be used for information presentation design and analysis; it uses human factors guidelines to assist the HMI designer in the spatial layout of the information required by machine operators to perform their tasks effectively. These human factors guidelines address such areas as the functional and physical relatedness of information sources. By representing these relationships with metaphors such as spring tension, attractors, and repellers, the tool can help designers visualize the complex constraint space and interacting effects of moving displays to various alternate locations. The tool contains techniques for visualizing the relative 'goodness' of a configuration, as well as mechanisms such as optimization vectors to provide guidance toward a more optimal design. Also available is a rule-based design checker to determine compliance with selected human factors guidelines.

Being a Modern Human: essentialist and hierarchical approaches to the emergence of 'modern human behaviour'

Directory of Open Access Journals (Sweden)

Terry Hopkinson

2013-06-01

Full Text Available The emergence of the modern human mind and modern human behaviour is a prominent issue in palaeolithic archaeology. The consensus has been that modernity, understood in terms of increased rates of innovation and the emergence of symbolism, is enabled by a heritable neurophysiology unique to Homo sapiens. This consensus is characterised as biological essentialist in that it understands modernity as genotypically specified and unique to Homo sapiens. 'Archaic' hominins such as the Neanderthals are understood to have lacked the modern neuroanatomical genotype and therefore to have been innately incapable of modern cognition and behaviour. The biological-essentialist programme, however, is facing a serious challenge as evidence for innovation and symbolism is found in the archaeological records of the Eurasian Middle Palaeolithic and the African Middle Stone Age. An alternative programme is emerging that understands modern human behaviour as an emergent property of social, demographic and ecological dynamics. It is argued that this programme is currently inadequate since it cannot explain the emergence of symbolically charged material culture and relies on inexorable long-term population growth. It is suggested here that the problem is better understood in terms of hierarchy theory, a body of ideas concerned with systems organised on multiple scales. Palaeolithic behaviour is reconceptualised as social practice emerging from a multi-scale knowledge system. It is shown that enhancements in the rate at which knowledgeable practices disseminate through social fields – the social transmission of knowledge - will have the effect of increasing the likelihood that novel practices will be incorporated into long-term structuring principles and thus become persistent practices. They will also effect a scalar convergence of domains of knowledgeability such that technical practices become incorporated into the construction of personhood as meaningful or

Modern Embedded Computing Designing Connected, Pervasive, Media-Rich Systems

CERN Document Server

Barry, Peter

2012-01-01

Modern embedded systems are used for connected, media-rich, and highly integrated handheld devices such as mobile phones, digital cameras, and MP3 players. All of these embedded systems require networking, graphic user interfaces, and integration with PCs, as opposed to traditional embedded processors that can perform only limited functions for industrial applications. While most books focus on these controllers, Modern Embedded Computing provides a thorough understanding of the platform architecture of modern embedded computing systems that drive mobile devices. The book offers a comprehen

Coping with human errors through system design: Implications for ecological interface design

DEFF Research Database (Denmark)

Rasmussen, Jens; Vicente, Kim J.

1989-01-01

Research during recent years has revealed that human errors are not stochastic events which can be removed through improved training programs or optimal interface design. Rather, errors tend to reflect either systematic interference between various models, rules, and schemata, or the effects...... of the adaptive mechanisms involved in learning. In terms of design implications, these findings suggest that reliable human-system interaction will be achieved by designing interfaces which tend to minimize the potential for control interference and support recovery from errors. In other words, the focus should...... be on control of the effects of errors rather than on the elimination of errors per se. In this paper, we propose a theoretical framework for interface design that attempts to satisfy these objectives. The goal of our framework, called ecological interface design, is to develop a meaningful representation...

Development of guidelines to review advanced human-system interfaces

International Nuclear Information System (INIS)

O'Hara, J.M.

1993-01-01

Advanced control rooms (ACRs) will utilize advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The US Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than 10 yr ago, considerably prior to these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this paper is to discuss the development, evaluation, and current status of the Advanced HSI Design Review Guideline

US NDC Modernization Iteration E2 Prototyping Report: User Interface Framework

Energy Technology Data Exchange (ETDEWEB)

Lewis, Jennifer E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Palmer, Melanie A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Vickers, James Wallace [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Voegtli, Ellen M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2014-12-01

During the second iteration of the US NDC Modernization Elaboration phase (E2), the SNL US NDC Modernization project team completed follow-on Rich Client Platform (RCP) exploratory prototyping related to the User Interface Framework (UIF). The team also developed a survey of browser-based User Interface solutions and completed exploratory prototyping for selected solutions. This report presents the results of the browser-based UI survey, summarizes the E2 browser-based UI and RCP prototyping work, and outlines a path forward for the third iteration of the Elaboration phase (E3).

Ancient humans and the origin of modern humans.

Science.gov (United States)

Kelso, Janet; Prüfer, Kay

2014-12-01

Recent advances in sequencing technologies and molecular methods have facilitated the sequencing of DNA from ancient human remains which has, in turn, provided unprecedented insight into human history. Within the past 4 years the genomes of Neandertals and Denisovans, as well as the genomes of at least two early modern humans, have been sequenced. These sequences showed that there have been several episodes of admixture between modern and archaic groups; including admixture from Neandertals into modern human populations outside of Africa, and admixture from Denisovans into modern human populations in Oceania. Recent results indicate that some of these introgressed regions may have been advantageous for modern humans as they expanded into new regions outside of Africa. Copyright © 2014. Published by Elsevier Ltd.

Step 1: Human System Integration Pilot-Technology Interface Requirements for Weather Management

Science.gov (United States)

2005-01-01

This document involves definition of technology interface requirements for Hazardous Weather Avoidance. Technology concepts in use by the Access 5 Weather Management Work Package were considered. Beginning with the Human System Integration (HIS) high-level functional requirement for Hazardous Weather Avoidance, and Hazardous Weather Avoidance technology elements, HSI requirements for the interface to the pilot were identified. Results of the analysis describe (1) the information required by the pilot to have knowledge of hazardous weather, and (2) the control capability needed by the pilot to obtain hazardous weather information. Fundamentally, these requirements provide the candidate Hazardous Weather Avoidance technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how Hazardous Weather Avoidance operations and functions should interface with the pilot to provide the necessary Weather Management functionality to the UA-pilot system. Requirements and guidelines for Hazardous Weather Avoidance are partitioned into four categories: (1) Planning En Route (2) Encountering Hazardous Weather En Route, (3) Planning to Destination, and (4) Diversion Planning Alternate Airport. Each requirement is stated and is supported with a rationale and associated reference(s).

Development of guidelines to review advanced human-system interfaces

International Nuclear Information System (INIS)

O'Hara, J.M.

1993-01-01

Advanced control rooms (ACRS) will utilize advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operators overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The US Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported in order to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well prior to these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this paper is to discuss the development, evaluation, and current status of the Advanced HSI Design Review Guideline, hereafter referred to as the ''Guideline.''

Safety Requirements and Modern Technical Requirements in Human Information Systems in Amman Hotels

OpenAIRE

Farouq Ahmad Alazzam; Sattam Rakan Allahawiah; Mohammad Nayef Alsarayreh; Kafa Hmoud Abdallah al Nawaiseh

2015-01-01

This study aimed to demonstrate the availability of Safety requirements and modern technical requirements in human information systems in Amman hotels. an the most important results of this study is the availability of security and safety requirements in human information systems In Amman hotels and The adequacy of the information that it provided .and show that all departments are not connected by appropriate and effective communication networks in adequate form . Also sophisticated operatin...

The Properties of Intelligent Human-Machine Interface

Directory of Open Access Journals (Sweden)

Alexander Alfimtsev

2012-04-01

Full Text Available Intelligent human-machine interfaces based on multimodal interaction are developed separately in different application areas. No unified opinion exists about the issue of what properties should these interfaces have to provide an intuitive and natural interaction. Having carried out an analytical survey of the papers that deal with intelligent interfaces a set of properties are presented, which are necessary for intelligent interface between an information system and a human: absolute response, justification, training, personification, adaptiveness, collectivity, security, hidden persistence, portability, filtering.

Control room modernization at Finnish nuclear power plants - Two projects compared

International Nuclear Information System (INIS)

Laarni, J.; Norros, L.

2006-01-01

The modernization of automation systems and human-machine interfaces is a current issue at both of the two nuclear power plants (i.e., Fortum's Loviisa plant and TVO's Olkiluoto plant) in Finland. Since the plants have been launched in the 1970's or 1980's, technology is in part old-fashioned and needs to be renewed. At Olkiluoto upgrades of the turbine operator systems have already been conducted; at Loviisa the first phase of the modernization project has just started. Basically, there is a question of the complete digitalization of the information streams at the two plants, and transition from a conventional hard-wired or hybrid control room to a screen-based one. The new human-machine interfaces will comprise new technology, such as PC workstations, soft control, touch screens and large-screen overall displays. The modernization of human-system interfaces is carried out in a stepwise manner at both plants. At both plants the main driver has not been the need to renew the user interfaces of the control room, but the need to upgrade the automation systems. In part because of this, there is a lack of a systematic top-down approach in which different aspects of human factors (HF) engineering are considered in relationship to higher level goals. Our aim here is to give an overview description of the control room modernization projects at the two plants and provide a preliminary evaluation of their progress to date. The projects are also compared, for example, in terms of duration, scope and phasing, and who is responsible for the realization of the project. In addition, we also compare experiences from the Finnish projects to experiences from similar projects abroad. The main part of the data used in this study is based on designers' and project members' interviews. (authors)

Plant Modernization Programs

International Nuclear Information System (INIS)

O'Hara, John

2004-01-01

Most nuclear plants were designed and built from the 1960's through the 1990's. These plants employ predominantly analog instrumentation and control (I and C) technology, and their control rooms are made up of primarily hardwired controls (e.g., switches, knobs and handles) and displays (e.g., gauges, linear scales and indicator lights). Over the past several years, these plants have been modernized with digital I and C and computer-based human-system interfaces (HSIs) such as software-based process controls, touch-screen interfaces and large-screen, overview displays. As these computer based HIS technologies are integrated into control rooms based on conventional technology, hybrid control rooms are created. The paper summarizes lessons learned from the study of plant modernization programs over the past ten years so that they can be used to help improve the modification process. While the research focused on the impact of technology change on human performance, a number of organizational and programmatic issues were observed as well. Eleven lessons learned are presented

Human-system interface evaluation system for advanced control room based on SQL database

International Nuclear Information System (INIS)

Zhang Yan; Zhou Zhiwei; Bian Zhiqiang; Xu Li

2005-01-01

User Interface (UI) plays an important role in the advanced control room (ACR) of a nuclear power plant (NPP). In this paper, we present a rule-based ACR Human-system Interface Evaluation System (AHSIES) using expert system technology, which can evaluate UI design shortcomings, propose modification suggestions, and help designer improve the ACR interface design. AHSIES consists of four programs: the UI Editor, the Operation Procedure Manager, the Operation Simulator and the UI Design Evaluator. These four parts respectively function for: editing a set of UI icons employed as the operation screens of an advanced control room; for editing operation procedures aiming at any specified operation with simple language; for simulate the operation sequences dynamically and recording the relevant information for design performance of the UIs; and for evaluating both static and dynamic performance of the ACR UI design according to well established design guidelines and criteria with the information gained from the first three programs. Microsoft SQL Server 2000 DBMS is adopted to manage the voluminous data and its complex relationships. The preliminary test application of AHSIES for a simplified ACR UI design of a PWR NPP has shown that the expert evaluation system is capable of achieving satisfactory evaluation results. (authors)

Human-machine interface upgrade

International Nuclear Information System (INIS)

Kropik, M.; Matejka, K.; Sklenka, L.; Chab, V.

2002-01-01

The article describes a new human-machine interface that was installed at the VR-1 training reactor. The human-machine interface upgrade was completed in the summer 2001. The interface was designed with respect to functional, ergonomic and aesthetic requirements. The interface is based on a personal computer equipped with two displays. One display enables alphanumeric communication between the reactor operator and the nuclear reactor I and C. The second display is a graphical one. It presents the status of the reactor, principal parameters (as power, period), control rods positions, course of the reactor power. Furthermore, it is possible to set parameters, to show the active core configuration, to perform reactivity calculations, etc. The software for the new human-machine interface was produced with the InTouch developing tool of the Wonder-Ware Company. It is possible to switch the language of the interface between Czech and English because of many foreign students and visitors to the reactor. Microcomputer based communication units with proper software were developed to connect the new human-machine interface with the present reactor I and C. The new human-machine interface at the VR-1 training reactor improves the comfort and safety of the reactor utilisation, facilitates experiments and training, and provides better support for foreign visitors. (orig.)

Treatment of human-computer interface in a decision support system

International Nuclear Information System (INIS)

Heger, A.S.; Duran, F.A.; Cox, R.G.

1992-01-01

One of the most challenging applications facing the computer community is development of effective adaptive human-computer interface. This challenge stems from the complex nature of the human part of this symbiosis. The application of this discipline to the environmental restoration and waste management is further complicated due to the nature of environmental data. The information that is required to manage environmental impacts of human activity is fundamentally complex. This paper will discuss the efforts at Sandia National Laboratories in developing the adaptive conceptual model manager within the constraint of the environmental decision-making. A computer workstation, that hosts the Conceptual Model Manager and the Sandia Environmental Decision Support System will also be discussed

Human-Manipulator Interface Using Particle Filter

Directory of Open Access Journals (Sweden)

Guanglong Du

2014-01-01

Full Text Available This paper utilizes a human-robot interface system which incorporates particle filter (PF and adaptive multispace transformation (AMT to track the pose of the human hand for controlling the robot manipulator. This system employs a 3D camera (Kinect to determine the orientation and the translation of the human hand. We use Camshift algorithm to track the hand. PF is used to estimate the translation of the human hand. Although a PF is used for estimating the translation, the translation error increases in a short period of time when the sensors fail to detect the hand motion. Therefore, a methodology to correct the translation error is required. What is more, to be subject to the perceptive limitations and the motor limitations, human operator is hard to carry out the high precision operation. This paper proposes an adaptive multispace transformation (AMT method to assist the operator to improve the accuracy and reliability in determining the pose of the robot. The human-robot interface system was experimentally tested in a lab environment, and the results indicate that such a system can successfully control a robot manipulator.

Implications of the behavioural immune system for social behaviour and human health in the modern world.

Science.gov (United States)

Schaller, Mark; Murray, Damian R; Bangerter, Adrian

2015-05-26

The 'behavioural immune system' is composed of mechanisms that evolved as a means of facilitating behaviours that minimized infection risk and enhanced fitness. Recent empirical research on human populations suggests that these mechanisms have unique consequences for many aspects of human sociality--including sexual attitudes, gregariousness, xenophobia, conformity to majority opinion and conservative sociopolitical attitudes. Throughout much of human evolutionary history, these consequences may have had beneficial health implications; but health implications in modern human societies remain unclear. This article summarizes pertinent ways in which modern human societies are similar to and different from the ecologies within which the behavioural immune system evolved. By attending to these similarities and differences, we identify a set of plausible implications-both positive and negative-that the behavioural immune system may have on health outcomes in contemporary human contexts. We discuss both individual-level infection risk and population-level epidemiological outcomes. We also discuss a variety of additional implications, including compliance with public health policies, the adoption of novel therapeutic interventions and actual immunological functioning. Research on the behavioural immune system, and its implications in contemporary human societies, can provide unique insights into relationships between fitness, sociality and health. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Investigation and evaluation into the usability of human-computer interfaces using a typical CAD system

Energy Technology Data Exchange (ETDEWEB)

Rickett, J D

1987-01-01

This research program covers three topics relating to the human-computer interface namely, voice recognition, tools and techniques for evaluation, and user and interface modeling. An investigation into the implementation of voice-recognition technologies examines how voice recognizers may be evaluated in commercial software. A prototype system was developed with the collaboration of FEMVIEW Ltd. (marketing a CAD package). A theoretical approach to evaluation leads to the hypothesis that human-computer interaction is affected by personality, influencing types of dialogue, preferred methods for providing helps, etc. A user model based on personality traits, or habitual-behavior patterns (HBP) is presented. Finally, a practical framework is provided for the evaluation of human-computer interfaces. It suggests that evaluation is an integral part of design and that the iterative use of evaluation techniques throughout the conceptualization, design, implementation and post-implementation stages will ensure systems that satisfy the needs of the users and fulfill the goal of usability.

A novel device for head gesture measurement system in combination with eye-controlled human machine interface

Science.gov (United States)

Lin, Chern-Sheng; Ho, Chien-Wa; Chang, Kai-Chieh; Hung, San-Shan; Shei, Hung-Jung; Yeh, Mau-Shiun

2006-06-01

This study describes the design and combination of an eye-controlled and a head-controlled human-machine interface system. This system is a highly effective human-machine interface, detecting head movement by changing positions and numbers of light sources on the head. When the users utilize the head-mounted display to browse a computer screen, the system will catch the images of the user's eyes with CCD cameras, which can also measure the angle and position of the light sources. In the eye-tracking system, the program in the computer will locate each center point of the pupils in the images, and record the information on moving traces and pupil diameters. In the head gesture measurement system, the user wears a double-source eyeglass frame, so the system catches images of the user's head by using a CCD camera in front of the user. The computer program will locate the center point of the head, transferring it to the screen coordinates, and then the user can control the cursor by head motions. We combine the eye-controlled and head-controlled human-machine interface system for the virtual reality applications.

New human machine interface for VR-1 training reactor

International Nuclear Information System (INIS)

Kropik, M.; Matejka, K.; Sklenka, L.; Chab, V.

2002-01-01

The contribution describes a new human machine interface that was installed at the VR-1 training reactor. The human machine interface update was completed in the summer 2001. The human machine interface enables to operate the training reactor. The interface was designed with respect to functional, ergonomic and aesthetic requirements. The interface is based on a personal computer equipped with two displays. One display enables alphanumeric communication between a reactor operator and the control and safety system of the nuclear reactor. Messages appear from the control system, the operator can write commands and send them there. The second display is a graphical one. It is possible to represent there the status of the reactor, principle parameters (as power, period), control rods' positions, the course of the reactor power. Furthermore, it is possible to set parameters, to show the active core configuration, to perform reactivity calculations, etc. The software for the new human machine interface was produced in the InTouch developing environment of the WonderWare Company. It is possible to switch the language of the interface between Czech and English because of many foreign students and visitors at the reactor. The former operator's desk was completely removed and superseded with a new one. Besides of the computer and the two displays, there are control buttons, indicators and individual numerical displays of instrumentation there. Utilised components guarantee high quality of the new equipment. Microcomputer based communication units with proper software were developed to connect the contemporary control and safety system with the personal computer of the human machine interface and the individual displays. New human machine interface at the VR-1 training reactor improves the safety and comfort of the reactor utilisation, facilitates experiments and training, and provides better support of foreign visitors.(author)

Control system oriented human interface

International Nuclear Information System (INIS)

Barale, P.; Jacobson, V.; Kilgore, R.; Rondeau, D.

1976-11-01

The on-line control system interface for magnet beam steering and focusing in the Bevalac is described. An Aydin model 5205B display generator was chosen. This display generator will allow the computer to completely rewrite a monitor screen in less than 50 ms and is also capable of controlling a color monitor

An intelligent human-machine system based on an ecological interface design concept

International Nuclear Information System (INIS)

Naito, N.

1995-01-01

It seems both necessary and promising to develop an intelligent human-machine system, considering the objective of the human-machine system and the recent advance in cognitive engineering and artificial intelligence together with the ever-increasing importance of human factor issues in nuclear power plant operation and maintenance. It should support human operators in their knowledge-based behaviour and allow them to cope with unanticipated abnormal events, including recovery from erroneous human actions. A top-down design approach has been adopted based on cognitive work analysis, and (1) an ecological interface, (2) a cognitive model-based advisor and (3) a robust automatic sequence controller have been established. These functions have been integrated into an experimental control room. A validation test was carried out by the participation of experienced operators and engineers. The results showed the usefulness of this system in supporting the operator's supervisory plant control tasks. ((orig.))

Modernization Solution for Legacy Banking System Using an Open Architecture

Directory of Open Access Journals (Sweden)

Constantin Marian MATEI

2012-01-01

Full Text Available Banks are still using legacy systems as the core of their business is comprised within such sys-tems. Since the technology and client demands are changing rapidly, the banks have to adapt their systems in order to be competitive. The issue is to identify correctly what are the bank users preferences in terms of software reliability and how modern is the system For instance, there are users who enjoy working using the old screen format, and there are users who enjoy working with newer layouts, Web interfaces, and so on. We need also to know the constraints generated by the usage of legacy systems, and how these systems can be improved or replaced. The scope of the article is to present a solution of modernizing a legacy banking system by using a SOA approach. The research is based on the modernization of a legacy system developed in COBOL/400 under IBM iSeries. The modernization process uses a SOA ap-proach using JAVA technologies.

Human-Machine Interface for the Control of Multi-Function Systems Based on Electrocutaneous Menu: Application to Multi-Grasp Prosthetic Hands.

Directory of Open Access Journals (Sweden)

Jose Gonzalez-Vargas

Full Text Available Modern assistive devices are very sophisticated systems with multiple degrees of freedom. However, an effective and user-friendly control of these systems is still an open problem since conventional human-machine interfaces (HMI cannot easily accommodate the system's complexity. In HMIs, the user is responsible for generating unique patterns of command signals directly triggering the device functions. This approach can be difficult to implement when there are many functions (necessitating many command patterns and/or the user has a considerable impairment (limited number of available signal sources. In this study, we propose a novel concept for a general-purpose HMI where the controller and the user communicate bidirectionally to select the desired function. The system first presents possible choices to the user via electro-tactile stimulation; the user then acknowledges the desired choice by generating a single command signal. Therefore, the proposed approach simplifies the user communication interface (one signal to generate, decoding (one signal to recognize, and allows selecting from a number of options. To demonstrate the new concept the method was used in one particular application, namely, to implement the control of all the relevant functions in a state of the art commercial prosthetic hand without using any myoelectric channels. We performed experiments in healthy subjects and with one amputee to test the feasibility of the novel approach. The results showed that the performance of the novel HMI concept was comparable or, for some outcome measures, better than the classic myoelectric interfaces. The presented approach has a general applicability and the obtained results point out that it could be used to operate various assistive systems (e.g., prosthesis vs. wheelchair, or it could be integrated into other control schemes (e.g., myoelectric control, brain-machine interfaces in order to improve the usability of existing low

Human-Machine Interface for the Control of Multi-Function Systems Based on Electrocutaneous Menu: Application to Multi-Grasp Prosthetic Hands.

Science.gov (United States)

Gonzalez-Vargas, Jose; Dosen, Strahinja; Amsuess, Sebastian; Yu, Wenwei; Farina, Dario

2015-01-01

Modern assistive devices are very sophisticated systems with multiple degrees of freedom. However, an effective and user-friendly control of these systems is still an open problem since conventional human-machine interfaces (HMI) cannot easily accommodate the system's complexity. In HMIs, the user is responsible for generating unique patterns of command signals directly triggering the device functions. This approach can be difficult to implement when there are many functions (necessitating many command patterns) and/or the user has a considerable impairment (limited number of available signal sources). In this study, we propose a novel concept for a general-purpose HMI where the controller and the user communicate bidirectionally to select the desired function. The system first presents possible choices to the user via electro-tactile stimulation; the user then acknowledges the desired choice by generating a single command signal. Therefore, the proposed approach simplifies the user communication interface (one signal to generate), decoding (one signal to recognize), and allows selecting from a number of options. To demonstrate the new concept the method was used in one particular application, namely, to implement the control of all the relevant functions in a state of the art commercial prosthetic hand without using any myoelectric channels. We performed experiments in healthy subjects and with one amputee to test the feasibility of the novel approach. The results showed that the performance of the novel HMI concept was comparable or, for some outcome measures, better than the classic myoelectric interfaces. The presented approach has a general applicability and the obtained results point out that it could be used to operate various assistive systems (e.g., prosthesis vs. wheelchair), or it could be integrated into other control schemes (e.g., myoelectric control, brain-machine interfaces) in order to improve the usability of existing low-bandwidth HMIs.

The development and evaluation of guidelines for the review of advanced human-system interfaces

International Nuclear Information System (INIS)

O'Hara, J.M.; Wachtel, J.

1992-01-01

Advanced control rooms for future nuclear power plants are being designed utilizing computer-based technologies. The US Nuclear Regulatory Commission reviews the human engineering aspects of such control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported in order to protect public health and safety. This paper describes a general approach to advanced human-system interface review, development of human factors guidelines to support NRC safety reviews of advanced systems, and the results of a guideline test and evaluation program

Flexible human machine interface for process diagnostics

International Nuclear Information System (INIS)

Reifman, J.; Graham, G.E.; Wei, T.Y.C.; Brown, K.R.; Chin, R.Y.

1996-01-01

A flexible human machine interface to design and display graphical and textual process diagnostic information is presented. The system operates on different computer hardware platforms, including PCs under MS Windows and UNIX Workstations under X-Windows, in a client-server architecture. The interface system is customized for specific process applications in a graphical user interface development environment by overlaying the image of the process piping and instrumentation diagram with display objects that are highlighted in color during diagnostic display. Customization of the system is presented for Commonwealth Edison's Braidwood PWR Chemical and Volume Control System with transients simulated by a full-scale operator-training simulator and diagnosed by a computer-based system

CAFE, a modern C++ interface to the EPICS channel access library

International Nuclear Information System (INIS)

Chrin, J.; Sloan, M.C.

2012-01-01

CAFE (Channel Access interface) is a C++ library that provides a modern, multifaceted interface to the EPICS-based control system that we may find in particle accelerators for instance. CAFE makes extensive use of templates and containers with multiple STL-compatible access methods to enhance efficiency, flexibility and performance. Stability and robustness are accomplished by ensuring that connectivity to EPICS channels remains in a well defined state in every eventuality, and results of all synchronous and asynchronous operations are captured and reported with integrity. CAFE presents the user with a number of options for writing and retrieving data to and from the control system. In addition to basic read and write operations, a further abstraction layer provides transparency to more intricate functionalities involving logical sets of data; such 'group' objects are easily instantiated through an XML-based configuration mechanism. CAFE's suitability for use in a broad spectrum of applications is demonstrated. These range from high performance Qt GUI (Graphical User Interface) control widgets, to event processing agents that propagate data through the Object Managements Group's Data Distribution Service (OMG-DDS), to script-like frameworks such as MATLAB. The methodology for the modular use of CAFE serves to improve maintainability by enforcing a logical boundary between the channel access components and the programming extensions of the application framework at hand. (authors)

US Army Weapon Systems Human-Computer Interface (WSHCI) style guide, Version 1

Energy Technology Data Exchange (ETDEWEB)

Avery, L.W.; O`Mara, P.A.; Shepard, A.P.

1996-09-30

A stated goal of the U.S. Army has been the standardization of the human computer interfaces (HCIS) of its system. Some of the tools being used to accomplish this standardization are HCI design guidelines and style guides. Currently, the Army is employing a number of style guides. While these style guides provide good guidance for the command, control, communications, computers, and intelligence (C4I) domain, they do not necessarily represent the more unique requirements of the Army`s real time and near-real time (RT/NRT) weapon systems. The Office of the Director of Information for Command, Control, Communications, and Computers (DISC4), in conjunction with the Weapon Systems Technical Architecture Working Group (WSTAWG), recognized this need as part of their activities to revise the Army Technical Architecture (ATA). To address this need, DISC4 tasked the Pacific Northwest National Laboratory (PNNL) to develop an Army weapon systems unique HCI style guide. This document, the U.S. Army Weapon Systems Human-Computer Interface (WSHCI) Style Guide, represents the first version of that style guide. The purpose of this document is to provide HCI design guidance for RT/NRT Army systems across the weapon systems domains of ground, aviation, missile, and soldier systems. Each domain should customize and extend this guidance by developing their domain-specific style guides, which will be used to guide the development of future systems within their domains.

Cognitive Human-Machine Interface Applied in Remote Support for Industrial Robot Systems

Directory of Open Access Journals (Sweden)

Tomasz Kosicki

2013-10-01

Full Text Available An attempt is currently being made to widely introduce industrial robots to Small-Medium Enterprises (SMEs. Since the enterprises usually employ too small number of robot units to afford specialized departments for robot maintenance, they must be provided with inexpensive and immediate support remotely. This paper evaluates whether the support can be provided by means of Cognitive Info-communication – communication in which human cognitive capabilities are extended irrespectively of geographical distances. The evaluations are given with an aid of experimental system that consists of local and remote rooms, which are physically separated – a six-degree-of-freedom NACHI SH133-03 industrial robot is situated in the local room, while the operator, who supervises the robot by means of audio-visual Cognitive Human-Machine Interface, is situated in the remote room. The results of simple experiments show that Cognitive Info-communication is not only efficient mean to provide the support remotely, but is probably also a powerful tool to enhance interaction with any data-rich environment that require good conceptual understanding of system's state and careful attention management. Furthermore, the paper discusses data presentation and reduction methods for data-rich environments, as well as introduces the concepts of Naturally Acquired Data and Cognitive Human-Machine Interfaces.

Human-Centric Interfaces for Ambient Intelligence

CERN Document Server

Aghajan, Hamid; Delgado, Ramon Lopez-Cozar

2009-01-01

To create truly effective human-centric ambient intelligence systems both engineering and computing methods are needed. This is the first book to bridge data processing and intelligent reasoning methods for the creation of human-centered ambient intelligence systems. Interdisciplinary in nature, the book covers topics such as multi-modal interfaces, human-computer interaction, smart environments and pervasive computing, addressing principles, paradigms, methods and applications. This book will be an ideal reference for university researchers, R&D engineers, computer engineers, and graduate s

Brain-Computer Interfaces Applying Our Minds to Human-computer Interaction

CERN Document Server

Tan, Desney S

2010-01-01

For generations, humans have fantasized about the ability to create devices that can see into a person's mind and thoughts, or to communicate and interact with machines through thought alone. Such ideas have long captured the imagination of humankind in the form of ancient myths and modern science fiction stories. Recent advances in cognitive neuroscience and brain imaging technologies have started to turn these myths into a reality, and are providing us with the ability to interface directly with the human brain. This ability is made possible through the use of sensors that monitor physical p

Methodology for the LABIHS PWR simulator modernization

Energy Technology Data Exchange (ETDEWEB)

Jaime, Guilherme D.G.; Oliveira, Mauro V., E-mail: gdjaime@ien.gov.b, E-mail: mvitor@ien.gov.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2011-07-01

The Human-System Interface Laboratory (LABIHS) simulator is composed by a set of advanced hardware and software components whose goal is to simulate the main characteristics of a Pressured Water Reactor (PWR). This simulator serves for a set of purposes, such as: control room modernization projects; designing of operator aiding systems; providing technological expertise for graphical user interfaces (GUIs) designing; control rooms and interfaces evaluations considering both ergonomics and human factors aspects; interaction analysis between operators and the various systems operated by them; and human reliability analysis in scenarios considering simulated accidents and normal operation. The simulator runs in a PA-RISC architecture server (HPC3700), developed nearby 2000's, using the HP-UX operating system. All mathematical modeling components were written using the HP Fortran-77 programming language with a shared memory to exchange data from/to all simulator modules. Although this hardware/software framework has been discontinued in 2008, with costumer support ceasing in 2013, it is still used to run and operate the simulator. Due to the fact that the simulator is based on an obsolete and proprietary appliance, the laboratory is subject to efficiency and availability issues, such as: downtime caused by hardware failures; inability to run experiments on modern and well known architectures; and lack of choice of running multiple simulation instances simultaneously. This way, there is a need for a proposal and implementation of solutions so that: the simulator can be ported to the Linux operating system, running on the x86 instruction set architecture (i.e. personal computers); we can simultaneously run multiple instances of the simulator; and the operator terminals run remotely. This paper deals with the design stage of the simulator modernization, in which it is performed a thorough inspection of the hardware and software currently in operation. Our goal is to

Methodology for the LABIHS PWR simulator modernization

Energy Technology Data Exchange (ETDEWEB)

Jaime, Guilherme D.G.; Oliveira, Mauro V., E-mail: gdjaime@ien.gov.b, E-mail: mvitor@ien.gov.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2011-07-01

The Human-System Interface Laboratory (LABIHS) simulator is composed by a set of advanced hardware and software components whose goal is to simulate the main characteristics of a Pressured Water Reactor (PWR). This simulator serves for a set of purposes, such as: control room modernization projects; designing of operator aiding systems; providing technological expertise for graphical user interfaces (GUIs) designing; control rooms and interfaces evaluations considering both ergonomics and human factors aspects; interaction analysis between operators and the various systems operated by them; and human reliability analysis in scenarios considering simulated accidents and normal operation. The simulator runs in a PA-RISC architecture server (HPC3700), developed nearby 2000's, using the HP-UX operating system. All mathematical modeling components were written using the HP Fortran-77 programming language with a shared memory to exchange data from/to all simulator modules. Although this hardware/software framework has been discontinued in 2008, with costumer support ceasing in 2013, it is still used to run and operate the simulator. Due to the fact that the simulator is based on an obsolete and proprietary appliance, the laboratory is subject to efficiency and availability issues, such as: downtime caused by hardware failures; inability to run experiments on modern and well known architectures; and lack of choice of running multiple simulation instances simultaneously. This way, there is a need for a proposal and implementation of solutions so that: the simulator can be ported to the Linux operating system, running on the x86 instruction set architecture (i.e. personal computers); we can simultaneously run multiple instances of the simulator; and the operator terminals run remotely. This paper deals with the design stage of the simulator modernization, in which it is performed a thorough inspection of the hardware and software currently in operation. Our goal is to

Methodology for the LABIHS PWR simulator modernization

International Nuclear Information System (INIS)

Jaime, Guilherme D.G.; Oliveira, Mauro V.

2011-01-01

The Human-System Interface Laboratory (LABIHS) simulator is composed by a set of advanced hardware and software components whose goal is to simulate the main characteristics of a Pressured Water Reactor (PWR). This simulator serves for a set of purposes, such as: control room modernization projects; designing of operator aiding systems; providing technological expertise for graphical user interfaces (GUIs) designing; control rooms and interfaces evaluations considering both ergonomics and human factors aspects; interaction analysis between operators and the various systems operated by them; and human reliability analysis in scenarios considering simulated accidents and normal operation. The simulator runs in a PA-RISC architecture server (HPC3700), developed nearby 2000's, using the HP-UX operating system. All mathematical modeling components were written using the HP Fortran-77 programming language with a shared memory to exchange data from/to all simulator modules. Although this hardware/software framework has been discontinued in 2008, with costumer support ceasing in 2013, it is still used to run and operate the simulator. Due to the fact that the simulator is based on an obsolete and proprietary appliance, the laboratory is subject to efficiency and availability issues, such as: downtime caused by hardware failures; inability to run experiments on modern and well known architectures; and lack of choice of running multiple simulation instances simultaneously. This way, there is a need for a proposal and implementation of solutions so that: the simulator can be ported to the Linux operating system, running on the x86 instruction set architecture (i.e. personal computers); we can simultaneously run multiple instances of the simulator; and the operator terminals run remotely. This paper deals with the design stage of the simulator modernization, in which it is performed a thorough inspection of the hardware and software currently in operation. Our goal is to

Application programming interface document for the modernized Transient Reactor Analysis Code (TRAC-M)

International Nuclear Information System (INIS)

Mahaffy, J.; Boyack, B.E.; Steinke, R.G.

1998-05-01

The objective of this document is to ease the task of adding new system components to the Transient Reactor Analysis Code (TRAC) or altering old ones. Sufficient information is provided to permit replacement or modification of physical models and correlations. Within TRAC, information is passed at two levels. At the upper level, information is passed by system-wide and component-specific data modules at and above the level of component subroutines. At the lower level, information is passed through a combination of module-based data structures and argument lists. This document describes the basic mechanics involved in the flow of information within the code. The discussion of interfaces in the body of this document has been kept to a general level to highlight key considerations. The appendices cover instructions for obtaining a detailed list of variables used to communicate in each subprogram, definitions and locations of key variables, and proposed improvements to intercomponent interfaces that are not available in the first level of code modernization

Step 1: Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Contingency Management

Science.gov (United States)

2005-01-01

This document involves definition of technology interface requirements for Contingency Management. This was performed through a review of Contingency Management-related, HSI requirements documents, standards, and recommended practices. Technology concepts in use by the Contingency Management Work Package were considered. Beginning with HSI high-level functional requirements for Contingency Management, and Contingency Management technology elements, HSI requirements for the interface to the pilot were identified. Results of the analysis describe (1) the information required by the pilot to have knowledge of system failures and associated contingency procedures, and (2) the control capability needed by the pilot to obtain system status and procedure information. Fundamentally, these requirements provide the candidate Contingency Management technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how Contingency Management operations and functions should interface with the pilot to provide the necessary Contingency Management functionality to the UA-pilot system. Requirements and guidelines for Contingency Management are partitioned into four categories: (1) Health and Status and (2) Contingency Management. Each requirement is stated and is supported with a rationale and associated reference(s).

Modern human origins: progress and prospects.

OpenAIRE

Stringer, Chris

2002-01-01

The question of the mode of origin of modern humans (Homo sapiens) has dominated palaeoanthropological debate over the last decade. This review discusses the main models proposed to explain modern human origins, and examines relevant fossil evidence from Eurasia, Africa and Australasia. Archaeological and genetic data are also discussed, as well as problems with the concept of 'modernity' itself. It is concluded that a recent African origin can be supported for H. sapiens, morphologically, be...

Study and simulation of human interface; Human interface kenkyu to simulation

Energy Technology Data Exchange (ETDEWEB)

Nishitani, H. [Nara Institute of Science and Technology, Nara (Japan)

1996-10-05

Validation researches have begun about the interrelationship between systems and human beings using a virtual-reality plant environment. This article introduces some recent studies about the human interface in an operation control system in a virtual-reality environment. The evaluation of a system from the viewpoint of ease of use is called a usability test, to which a psychological protocol analysis is applied for finding out problematic points by carefully observing the operator actually operating the system. For instance, in a boiler plant simulator constructed for DCS training, the operator is given some tasks, such as the prediction as to how a certain event will develop, probing of the cause of anomalies, and execution of related operations. Video cameras are installed at various spots for the minute observation of facial expressions and behavior of the operator, and the operator`s recognition, thought, behavior, and utterances, expressed by the operator facially or verbally, are recorded and analyzed, and the results are utilized for system improvement and operator training. 3 refs., 2 figs.

Optimizing human-system interface automation design based on a skill-rule-knowledge framework

International Nuclear Information System (INIS)

Lin, Chiuhsiang Joe; Yenn, T.-C.; Yang, C.-W.

2010-01-01

This study considers the technological change that has occurred in complex systems within the past 30 years. The role of human operators in controlling and interacting with complex systems following the technological change was also investigated. Modernization of instrumentation and control systems and components leads to a new issue of human-automation interaction, in which human operational performance must be considered in automated systems. The human-automation interaction can differ in its types and levels. A system design issue is usually realized: given these technical capabilities, which system functions should be automated and to what extent? A good automation design can be achieved by making an appropriate human-automation function allocation. To our knowledge, only a few studies have been published on how to achieve appropriate automation design with a systematic procedure. Further, there is a surprising lack of information on examining and validating the influences of levels of automation (LOAs) on instrumentation and control systems in the advanced control room (ACR). The study we present in this paper proposed a systematic framework to help in making an appropriate decision towards types of automation (TOA) and LOAs based on a 'Skill-Rule-Knowledge' (SRK) model. From the evaluating results, it was shown that the use of either automatic mode or semiautomatic mode is insufficient to prevent human errors. For preventing the occurrences of human errors and ensuring the safety in ACR, the proposed framework can be valuable for making decisions in human-automation allocation.

U.S. Army weapon systems human-computer interface style guide. Version 2

Energy Technology Data Exchange (ETDEWEB)

Avery, L.W.; O`Mara, P.A.; Shepard, A.P.; Donohoo, D.T.

1997-12-31

A stated goal of the US Army has been the standardization of the human computer interfaces (HCIs) of its system. Some of the tools being used to accomplish this standardization are HCI design guidelines and style guides. Currently, the Army is employing a number of HCI design guidance documents. While these style guides provide good guidance for the command, control, communications, computers, and intelligence (C4I) domain, they do not necessarily represent the more unique requirements of the Army`s real time and near-real time (RT/NRT) weapon systems. The Office of the Director of Information for Command, Control, Communications, and Computers (DISC4), in conjunction with the Weapon Systems Technical Architecture Working Group (WSTAWG), recognized this need as part of their activities to revise the Army Technical Architecture (ATA), now termed the Joint Technical Architecture-Army (JTA-A). To address this need, DISC4 tasked the Pacific Northwest National Laboratory (PNNL) to develop an Army weapon systems unique HCI style guide, which resulted in the US Army Weapon Systems Human-Computer Interface (WSHCI) Style Guide Version 1. Based on feedback from the user community, DISC4 further tasked PNNL to revise Version 1 and publish Version 2. The intent was to update some of the research and incorporate some enhancements. This document provides that revision. The purpose of this document is to provide HCI design guidance for the RT/NRT Army system domain across the weapon systems subdomains of ground, aviation, missile, and soldier systems. Each subdomain should customize and extend this guidance by developing their domain-specific style guides, which will be used to guide the development of future systems within their subdomains.

Human Reliability and the Current Dilemma in Human-Machine Interface Design Strategies

International Nuclear Information System (INIS)

Passalacqua, Roberto; Yamada, Fumiaki

2002-01-01

Since human error dominates the probability of failures of still-existing human-requiring systems (as the Monju reactor), the human-machine interface needs to be improved. Several rationales may lead to the conclusion that 'humans' should limit themselves to monitor the 'machine'. For example, this is the trend in the aviation industry: newest aircrafts are designed to be able to return to a safe state by the use of control systems, which do not need human intervention. Thus, the dilemma whether we really need operators (for example in the nuclear industry) might arise. However, social-technical approaches in recent human error analyses are pointing out the so-called 'organizational errors' and the importance of a human-machine interface harmonization. Typically plant's operators are a 'redundant' safety system with a much lower reliability (than the machine): organizational factors and harmonization requirements suggest designing the human-machine interface in a way that allows improvement of operator's reliability. In addition, taxonomy studies of accident databases have also proved that operators' training should promote processes of decision-making. This is accomplished in the latest trends of PSA technology by introducing the concept of a 'Safety Monitor' that is a computer-based tool that uses a level 1 PSA model of the plant. Operators and maintenance schedulers of the Monju FBR will be able to perform real-time estimations of the plant risk level. The main benefits are risk awareness and improvements in decision-making by operators. Also scheduled maintenance can be approached in a more rational (safe and economic) way. (authors)

Human-machine interface in mobile teleoperators

International Nuclear Information System (INIS)

Draper, J.V.

1985-01-01

In this document the following point has been made: human-machine interface is not ideal, and may be improved upon: telepresence is ideal but not required; current interfaces degrade normal human inputs/outputs; available and developing technology can improve interfaces

An approach to human-centered design of nuclear medical equipment: the system of caption of the thyroid

International Nuclear Information System (INIS)

Santos, Isaac J.A. Luquetti; Silva, Carlos Borges da; Santana, Marcos; Carvalho, Paulo Victor R.; Oliveira, Mauro Vitor de; Mol, Antonio Carlos Mol; Grecco, Claudio Henrique; Augusto, Silas Cordeiro

2005-01-01

Technology plays an important role in modern medical centers, making health care increasingly complex, relying on complex technical equipment. This technical complexity is particularly noticeable in the nuclear medicine and can increase the risks for human error. Human error has many causes such as performance shaping factors, organizational factors and user interface design. Poorly design human system interfaces of nuclear medical equipment can increase the risks for human error. If all nuclear medical equipment had been designed with good user interfaces, incidents and accidents could be reduced as well as he time required to learn how to use the equipment. Although some manufacturers of nuclear medical equipment have already integrate human factors principles in their products, there is still a need to steer the development of nuclear medical technology toward more human-centered approach. The aim of this paper is to propose a methodology that contributes to the design, development and evaluation of nuclear medical equipment and human system interface, towards a human-centered approach. This methodology includes the ergonomic approach, based on the operator activity analysis, together with human factors standards and guidelines, questionnaires and user based testing. We describe a case study in which this methodology is being applied in evaluation of the thyroid uptake system, getting essential information and data, that ill be used in development of a new system. (author)

Step 1: Human System Interface (HSI) Functional Requirements Document (FRD). Version 2

Science.gov (United States)

2006-01-01

This Functional Requirements Document (FRD) establishes a minimum set of Human System Interface (HSI) functional requirements to achieve the Access 5 Vision of "operating High Altitude, Long Endurance (HALE) Unmanned Aircraft Systems (UAS) routinely, safely, and reliably in the National Airspace System (NAS)". Basically, it provides what functions are necessary to fly UAS in the NAS. The framework used to identify the appropriate functions was the "Aviate, Navigate, Communicate, and Avoid Hazards" structure identified in the Access 5 FRD. As a result, fifteen high-level functional requirements were developed. In addition, several of them have been decomposed into low-level functional requirements to provide more detail.

Evaluation of the user interface simplicity in the modern generation of mechanical ventilators.

Science.gov (United States)

Uzawa, Yoshihiro; Yamada, Yoshitsugu; Suzukawa, Masayuki

2008-03-01

We designed this study to evaluate the simplicity of the user interface in modern-generation mechanical ventilators. We hypothesized that different designs in the user interface could result in different rates of operational failures. A laboratory in a tertiary teaching hospital. Crossover design. Twenty-one medical resident physicians who did not possess operating experience with any of the selected ventilators. Four modern mechanical ventilators were selected: Dräger Evita XL, Maquet Servo-i, Newport e500, and Puritan Bennett 840. Each subject was requested to perform 8 tasks on each ventilator. Two objective variables (the number of successfully completed tasks without operational failures and the operational time) and the overall subjective rating of the ease of use, measured with a 100-mm visual analog scale were recorded. The total percentage of operational failures made for all subjects, for all tasks, was 23%. There were significant differences in the rates of operational failures and operational time among the 4 ventilators. Subjects made more operational failures in setting up the ventilators and in making ventilator-setting changes than in reacting to alarms. The subjective feeling of the ease of use was also significantly different among the ventilators. The design of the user interface is relevant to the occurrence of operational failures. Our data indicate that ventilator designers could optimize the user-interface design to reduce the operational failures; therefore, basic user interface should be standardized among the clinically used mechanical ventilators.

Applying human factors engineering program to the modernization project of NPP Control Room in accordance with U.S.NRC and KTA regulations

International Nuclear Information System (INIS)

Avellar, Renato Koga de; Schirru, Roberto

2017-01-01

Application of Human Factors Engineering (HFE) in the design and implementation of such a project is essential to ensure that the new man-machine interface outcoming from the modernization does not have any negative impacts on human performance and plant safety. This paper analyzes the applicability of the Human Factors Engineering Program in the licensing and certification of Konvoi Nucleoelectric Power Plant Control Room Modernization Project using digital instrumentation and control in accordance with U.S.NRC and KTA regulations. The results of the analyses show that although regulatory bodies adopt different methodology in the process of licensing the modernization of control rooms, the engineering aspects are being developed based on the principles of engineering. (author)

Applying human factors engineering program to the modernization project of NPP Control Room in accordance with U.S.NRC and KTA regulations

Energy Technology Data Exchange (ETDEWEB)

Avellar, Renato Koga de, E-mail: rkoga@eletronuclear.gov.br [Eletrobrás Termonuclear S.A. (ELETRONUCLEAR), Rio de Janeiro, RJ (Brazil). Assessoria de Licenciamento Nuclear e Ambiental; Schirru, Roberto, E-mail: schirru@lmp.ufrj.br [Coordenacao de Pos-Graduacao e Pesquisa de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

2017-07-01

Application of Human Factors Engineering (HFE) in the design and implementation of such a project is essential to ensure that the new man-machine interface outcoming from the modernization does not have any negative impacts on human performance and plant safety. This paper analyzes the applicability of the Human Factors Engineering Program in the licensing and certification of Konvoi Nucleoelectric Power Plant Control Room Modernization Project using digital instrumentation and control in accordance with U.S.NRC and KTA regulations. The results of the analyses show that although regulatory bodies adopt different methodology in the process of licensing the modernization of control rooms, the engineering aspects are being developed based on the principles of engineering. (author)

Incorporating modern neuroscience findings to improve brain-computer interfaces: tracking auditory attention.

Science.gov (United States)

Wronkiewicz, Mark; Larson, Eric; Lee, Adrian Kc

2016-10-01

Brain-computer interface (BCI) technology allows users to generate actions based solely on their brain signals. However, current non-invasive BCIs generally classify brain activity recorded from surface electroencephalography (EEG) electrodes, which can hinder the application of findings from modern neuroscience research. In this study, we use source imaging-a neuroimaging technique that projects EEG signals onto the surface of the brain-in a BCI classification framework. This allowed us to incorporate prior research from functional neuroimaging to target activity from a cortical region involved in auditory attention. Classifiers trained to detect attention switches performed better with source imaging projections than with EEG sensor signals. Within source imaging, including subject-specific anatomical MRI information (instead of using a generic head model) further improved classification performance. This source-based strategy also reduced accuracy variability across three dimensionality reduction techniques-a major design choice in most BCIs. Our work shows that source imaging provides clear quantitative and qualitative advantages to BCIs and highlights the value of incorporating modern neuroscience knowledge and methods into BCI systems.

Concept of software interface for BCI systems

Science.gov (United States)

Svejda, Jaromir; Zak, Roman; Jasek, Roman

2016-06-01

Brain Computer Interface (BCI) technology is intended to control external system by brain activity. One of main part of such system is software interface, which carries about clear communication between brain and either computer or additional devices connected to computer. This paper is organized as follows. Firstly, current knowledge about human brain is briefly summarized to points out its complexity. Secondly, there is described a concept of BCI system, which is then used to build an architecture of proposed software interface. Finally, there are mentioned disadvantages of sensing technology discovered during sensing part of our research.

A graphical user-interface control system at SRRC

International Nuclear Information System (INIS)

Chen, J.S.; Wang, C.J.; Chen, S.J.; Jan, G.J.

1993-01-01

A graphical user interface control system of 1.3 GeV synchrotron radiation light source was designed and implemented for the beam transport line (BTL) and storage ring (SR). A modern control technique has been used to implement and control the third generation synchrotron light source. Two level computer hardware configuration, that includes process and console computers as a top level and VME based intelligent local controller as a bottom level, was setup and tested. Both level computers are linked by high speed Ethernet data communication network. A database includes static and dynamic databases as well as access routines were developed. In order to commission and operate the machine friendly, the graphical man machine interface was designed and coded. The graphical user interface (GUI) software was installed on VAX workstations for the BTL and SR at the Synchrotron Radiation Research Center (SRRC). The over all performance has been evaluated at 10Hz update rate. The results showed that the graphical operator interface control system is versatile system and can be implemented into the control system of the accelerator. It will provide the tool to control and monitor the equipments of the radiation light source especially for machine commissioning and operation

Modern Human Capital Management

OpenAIRE

Feldberger, Madita

2008-01-01

Title: Modern Human Capital Management Seminar date: 30th of May 2008 Course: Master thesis in Business Administration, 15 ECTS Authors: Madita Feldberger Supervisor: Lars Svensson Keywords: Human capital, SWOT Analysis, Strategic Map, Balanced Scorecard Research Problem: Despite of the success of Human Capital Management (HCM) in research it did not arrive yet in the HR departments of many companies. Numerous firms even have problems to set their strategic goals with focus on HR. The HR Bala...

Integrated Human Factors Design Guidelines for Sound Interface

International Nuclear Information System (INIS)

Lee, Jung Woon; Lee, Yong Hee; Oh, In Seok; Lee, Hyun Chul; Cha, Woo Chang

2004-05-01

Digital MMI, such as CRT, LCD etc., has been used increasingly in the design of main control room of the Korean standard nuclear power plants following the YGN units 3 and 4. The utilization of digital MMI may introduce various kind of sound interface into the control room design. In this project, for five top-level guideline items, including Sound Formats, Alarms, Sound Controls, Communications, and Environments, a total of 147 detail guidelines were developed and a database system for these guidelines was developed. The integrated human factors design guidelines for sound interface and the database system developed in this project will be useful for the design of sound interface of digital MMI in Korean NPPs

Integrated Human Factors Design Guidelines for Sound Interface

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Woon; Lee, Yong Hee; Oh, In Seok; Lee, Hyun Chul [KAERI, Daejeon (Korea, Republic of); Cha, Woo Chang [Kumoh National Univ. of Technology, Gumi (Korea, Republic of)

2004-05-15

Digital MMI, such as CRT, LCD etc., has been used increasingly in the design of main control room of the Korean standard nuclear power plants following the YGN units 3 and 4. The utilization of digital MMI may introduce various kind of sound interface into the control room design. In this project, for five top-level guideline items, including Sound Formats, Alarms, Sound Controls, Communications, and Environments, a total of 147 detail guidelines were developed and a database system for these guidelines was developed. The integrated human factors design guidelines for sound interface and the database system developed in this project will be useful for the design of sound interface of digital MMI in Korean NPPs.

Conversational module-based simulation system as a human interface to versatile dynamic simulation of nuclear power plant

International Nuclear Information System (INIS)

Yoshikawa, H.; Nakaya, K.; Wakabayashi, J.

1986-01-01

A new conversational simulation system is proposed which aims at effective re-utilization of software resources as module database, and conducting versatile simulations easily by automatic module integration with the help of user-friendly interfaces. The whole simulation system is composed of the four parts: master module library and pre-compiler system as the core system, while module database management system and simulation execution support system for the user interfaces. Basic methods employed in the system are mentioned with their knowledge representation and the relationship with the human information processing. An example practice of an LMFBR reactor dynamic simulation by the system demonstrated its capability to integrate a large simulation program and the related input/output files automatically by a single user

Auditory interfaces: The human perceiver

Science.gov (United States)

Colburn, H. Steven

1991-01-01

A brief introduction to the basic auditory abilities of the human perceiver with particular attention toward issues that may be important for the design of auditory interfaces is presented. The importance of appropriate auditory inputs to observers with normal hearing is probably related to the role of hearing as an omnidirectional, early warning system and to its role as the primary vehicle for communication of strong personal feelings.

HCIDL: Human-computer interface description language for multi-target, multimodal, plastic user interfaces

Directory of Open Access Journals (Sweden)

Lamia Gaouar

2018-06-01

Full Text Available From the human-computer interface perspectives, the challenges to be faced are related to the consideration of new, multiple interactions, and the diversity of devices. The large panel of interactions (touching, shaking, voice dictation, positioning … and the diversification of interaction devices can be seen as a factor of flexibility albeit introducing incidental complexity. Our work is part of the field of user interface description languages. After an analysis of the scientific context of our work, this paper introduces HCIDL, a modelling language staged in a model-driven engineering approach. Among the properties related to human-computer interface, our proposition is intended for modelling multi-target, multimodal, plastic interaction interfaces using user interface description languages. By combining plasticity and multimodality, HCIDL improves usability of user interfaces through adaptive behaviour by providing end-users with an interaction-set adapted to input/output of terminals and, an optimum layout. Keywords: Model driven engineering, Human-computer interface, User interface description languages, Multimodal applications, Plastic user interfaces

Human cranial diversity and evidence for an ancient lineage of modern humans.

Science.gov (United States)

Schillaci, Michael A

2008-06-01

This study examines the genetic affinities of various modern human groupings using a multivariate analysis of morphometric data. Phylogenetic relationships among these groupings are also explored using neighbor-joining analysis of the metric data. Results indicate that the terminal Pleistocene/early Holocene fossils from Australasia exhibit a close genetic affinity with early modern humans from the Levant. Furthermore, recent human populations and Upper Paleolithic Europeans share a most recent common ancestor not shared with either the early Australasians or the early Levantine humans. This pattern of genetic and phylogenetic relationships suggests that the early modern humans from the Levant either contributed directly to the ancestry of an early lineage of Australasians, or that they share a recent common ancestor with them. The principal findings of the study, therefore, lend support to the notion of an early dispersal from Africa by a more ancient lineage of modern human prior to 50 ka, perhaps as early as OIS 5 times (76-100 ka).

Theorema 2.0: A Graphical User Interface for a Mathematical Assistant System

Directory of Open Access Journals (Sweden)

Wolfgang Windsteiger

2013-07-01

Full Text Available Theorema 2.0 stands for a re-design including a complete re-implementation of the Theorema system, which was originally designed, developed, and implemented by Bruno Buchberger and his Theorema group at RISC. In this paper, we present the first prototype of a graphical user interface (GUI for the new system. It heavily relies on powerful interactive capabilities introduced in recent releases of the underlying Mathematica system, most importantly the possibility of having dynamic objects connected to interface elements like sliders, menus, check-boxes, radio-buttons and the like. All these features are fully integrated into the Mathematica programming environment and allow the implementation of a modern user interface.

The interface between tradition and science: naturopaths' perspectives of modern practice.

Science.gov (United States)

Steel, Amie; Adams, Jon

2011-10-01

Although there has been much international commentary, little is known about the interface between traditional knowledge and scientific research in modern naturopathic practice. This study aimed to explore this interface from the perspective of naturopaths. Semistructured interviews were conducted with naturopaths in current practice. The participants were selected using purposive sampling, and the data from the interviews were interpreted using thematic analysis. Interviews were conducted in a place suitable to each participant. Twelve (12) naturopaths in current clinical practice were interviewed. The participants represented a diversity of characteristics including gender, time in practice, level of qualification, and clinical contact hours per week. Thematic analysis was used to identify common themes from the interviews. Analysis identified a disparity in practitioner definition of what constitutes traditional information. However, it also identified that traditional knowledge is considered a valid source of information, whereas the validity and value of modern research is questioned. There is also tension between these two information sources, with science being argued to both support traditional knowledge, while also undermining its value. This tension seems to be overcome by practitioners' use of traditional knowledge to direct their own research, as well as drawing upon their knowledge of science to explain traditional knowledge as yet not researched. The findings of this qualitative study reveal tensions and ambiguities around the interface between tradition and science with regard to naturopathic clinical practice. Understanding these findings may assist individuals and groups within the naturopathic profession, as well as those outside the profession engaging and collaborating with naturopaths.

Establishing a value chain for human factors in nuclear power plantcontrol room modernization

Energy Technology Data Exchange (ETDEWEB)

Joe, Jeffrey Clark [Idaho National Laboratory; Thomas, Kenneth David [Idaho National Laboratory; Boring, Ronald Laurids [Idaho National Laboratory

2015-07-01

Commercial nuclear power plants in the United States (U.S.) have operated reliably and efficiently for decades. With the life extensions of plants now being planned for operation beyond their original operating licenses, there are opportunities to achieve even greater efficiencies, while maintaining high operational reliabilities, with strategic, risk- and economically-informed, upgrades to plant systems and infrastructure. The U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) program supports the commercial nuclear industry’s modernization efforts through research and development (R&D) activities across many areas to help establish the technical and economic bases for modernization activities. The Advanced Instrumentation, Information, and Control Systems Technologies pathway is one R&D focus area for the LWRS program, and has researchers at Idaho National Laboratory working with select utility partners to use human factors and instrumentation and controls R&D to help modernize the plant’s main control room. However, some in the nuclear industry have not been as enthusiastic about using human factors R&D to inform life extension decision making. Part of the reason for this may stem from uncertainty decision-makers have regarding how human factors fits into the value chain for nuclear power plant control room modernization. This paper reviews past work that has attempted to demonstrate the value of human factors, and then describes the value chain concept, how it applies to control room modernization, and then makes a case for how and why human factors is an essential link in the modernization value chain.

EOG-sEMG Human Interface for Communication.

Science.gov (United States)

Tamura, Hiroki; Yan, Mingmin; Sakurai, Keiko; Tanno, Koichi

2016-01-01

The aim of this study is to present electrooculogram (EOG) and surface electromyogram (sEMG) signals that can be used as a human-computer interface. Establishing an efficient alternative channel for communication without overt speech and hand movements is important for increasing the quality of life for patients suffering from amyotrophic lateral sclerosis, muscular dystrophy, or other illnesses. In this paper, we propose an EOG-sEMG human-computer interface system for communication using both cross-channels and parallel lines channels on the face with the same electrodes. This system could record EOG and sEMG signals as "dual-modality" for pattern recognition simultaneously. Although as much as 4 patterns could be recognized, dealing with the state of the patients, we only choose two classes (left and right motion) of EOG and two classes (left blink and right blink) of sEMG which are easily to be realized for simulation and monitoring task. From the simulation results, our system achieved four-pattern classification with an accuracy of 95.1%.

Taking account of human factors for interface assessment and design in monitoring automated systems

International Nuclear Information System (INIS)

Musso, J.-F.; Sicard, Y.; Martin, M.

1990-01-01

Optimum balance between control means and the operator capacities is sought for to achieve computerization of Man-Machine interfaces. Observation of the diagnosis activity of populations of operators in situation on simulators enables design criteria to be defined which are well-suited to the characteristics of the tasks with which they are confronted. This observation provides an assessment of the interfaces from the standpoint of the graphic layer, of the Human behaviour induced by the Machine and of the nature of the interaction between these two systems. This requires an original approach dialectically involving cognitive psychology, dynamic management of the knowledge bases (artificial intelligence) in a critical industrial control and monitoring application. (author)

Techniques and applications for binaural sound manipulation in human-machine interfaces

Science.gov (United States)

Begault, Durand R.; Wenzel, Elizabeth M.

1992-01-01

The implementation of binaural sound to speech and auditory sound cues (auditory icons) is addressed from both an applications and technical standpoint. Techniques overviewed include processing by means of filtering with head-related transfer functions. Application to advanced cockpit human interface systems is discussed, although the techniques are extendable to any human-machine interface. Research issues pertaining to three-dimensional sound displays under investigation at the Aerospace Human Factors Division at NASA Ames Research Center are described.

Functional Mobility Testing: A Novel Method to Establish Human System Interface Design Requirements

Science.gov (United States)

England, Scott A.; Benson, Elizabeth A.; Rajulu, Sudhakar

2008-01-01

Across all fields of human-system interface design it is vital to posses a sound methodology dictating the constraints on the system based on the capabilities of the human user. These limitations may be based on strength, mobility, dexterity, cognitive ability, etc. and combinations thereof. Data collected in an isolated environment to determine, for example, maximal strength or maximal range of motion would indeed be adequate for establishing not-to-exceed type design limitations, however these restraints on the system may be excessive over what is basally needed. Resources may potentially be saved by having a technique to determine the minimum measurements a system must accommodate. This paper specifically deals with the creation of a novel methodology for establishing mobility requirements for a new generation of space suit design concepts. Historically, the Space Shuttle and the International Space Station vehicle and space hardware design requirements documents such as the Man-Systems Integration Standards and International Space Station Flight Crew Integration Standard explicitly stated that the designers should strive to provide the maximum joint range of motion capabilities exhibited by a minimally clothed human subject. In the course of developing the Human-Systems Integration Requirements (HSIR) for the new space exploration initiative (Constellation), an effort was made to redefine the mobility requirements in the interest of safety and cost. Systems designed for manned space exploration can receive compounded gains from simplified designs that are both initially less expensive to produce and lighter, thereby, cheaper to launch.

Development of comprehensive HFE guidelines for the evaluation of NPP human systems interfaces

International Nuclear Information System (INIS)

O'Hara, J.M.; Brown, W.S.; Wachtel, J.

1994-01-01

Advanced control room (ACR) concepts are being developed in the commercial nuclear power industry as part of future reactor designs. The ACRs will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the ways in which the operator interacts with and supervises an increasingly complex system. The US Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The NRC is developing guidelines to support its review of these advanced designs. This paper discusses (1) the development of guidelines for advanced HSI review, (2) the integration of those guidelines with existing guidance, and (3) a methodology for further guidance development

Human Factors Interface with Systems Engineering for NASA Human Spaceflights

Science.gov (United States)

Wong, Douglas T.

2009-01-01

This paper summarizes the past and present successes of the Habitability and Human Factors Branch (HHFB) at NASA Johnson Space Center s Space Life Sciences Directorate (SLSD) in including the Human-As-A-System (HAAS) model in many NASA programs and what steps to be taken to integrate the Human-Centered Design Philosophy (HCDP) into NASA s Systems Engineering (SE) process. The HAAS model stresses systems are ultimately designed for the humans; the humans should therefore be considered as a system within the systems. Therefore, the model places strong emphasis on human factors engineering. Since 1987, the HHFB has been engaging with many major NASA programs with much success. The HHFB helped create the NASA Standard 3000 (a human factors engineering practice guide) and the Human Systems Integration Requirements document. These efforts resulted in the HAAS model being included in many NASA programs. As an example, the HAAS model has been successfully introduced into the programmatic and systems engineering structures of the International Space Station Program (ISSP). Success in the ISSP caused other NASA programs to recognize the importance of the HAAS concept. Also due to this success, the HHFB helped update NASA s Systems Engineering Handbook in December 2007 to include HAAS as a recommended practice. Nonetheless, the HAAS model has yet to become an integral part of the NASA SE process. Besides continuing in integrating HAAS into current and future NASA programs, the HHFB will investigate incorporating the Human-Centered Design Philosophy (HCDP) into the NASA SE Handbook. The HCDP goes further than the HAAS model by emphasizing a holistic and iterative human-centered systems design concept.

Front panel human interface for FASTBUS

International Nuclear Information System (INIS)

Gustavson, D.B.; Holmes, T.L.; Paffrath, L.; Steffani, J.P.

1980-01-01

A human interface based on the Snoop diagnostic module has been designed to facilitate checkout of FASTBUS devices, diagnosis of system faults, and monitoring of system performance. This system, which is a generalization of the usual computer front panel or control console, includes logic analyzer functions, display and manual-control access to other modules, a microprocessor which allows the user to create and execute diagnostic programs and store them on a minifloppy disk, and a diagnostic network which allows remote console operation and coordination of information from multiple segments' Snoops

Step 1: Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Command, Control, and Communications (C3)

Science.gov (United States)

2005-01-01

The document provides the Human System Integration(HSI) high-level functional C3 HSI requirements for the interface to the pilot. Description includes (1) the information required by the pilot to have knowledge C3 system status, and (2) the control capability needed by the pilot to obtain C3 information. Fundamentally, these requirements provide the candidate C3 technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how C3 operations and functions should interface with the pilot to provide the necessary C3 functionality to the UA-pilot system. Requirements and guidelines for C3 are partitioned into three categories: (1) Pilot-Air Traffic Control (ATC) Voice Communications (2) Pilot-ATC Data Communications, and (3) command and control of the unmanned aircraft (UA). Each requirement is stated and is supported with a rationale and associated reference(s).

The organizational context of error tolerant interface systems

International Nuclear Information System (INIS)

Sepanloo, K.; Meshkati, N.; Kozuh, M.

1995-01-01

Human error has been recognized as the main contributor to the occurrence of incidents in large technological systems such as nuclear power plants. Recent researches have concluded that human errors are unavoidable side effects of exploration of acceptable performance during adaptation to the unknown changes in the environment. To assist the operators in coping with unforeseen situations, the innovative error tolerant interface systems have been proposed to provide the operators with opportunities to make hypothetical tests without having to carry them out directly on the plant in potentially irreversible conditions. On the other hand, the degree of success of introduction of any new system into a tightly-coupled complex socio-technological system is known to be a great deal dependent upon the degree of harmony of that system with the organization s framework and attitudes. Error tolerant interface systems with features of simplicity, transparency, error detectability and recoverability provide a forgiving cognition environment where the effects of errors are observable and recoverable. The nature of these systems are likely to be more consistent with flexible and rather plain organizational structures, in which static and punitive concepts of human error are modified on the favour of dynamic and adaptive approaches. In this paper the features of error tolerant interface systems are explained and their consistent organizational structures are explored. (author)

The organizational context of error tolerant interface systems

Energy Technology Data Exchange (ETDEWEB)

Sepanloo, K [Nuclear Safety Department, Tehran (Iran, Islamic Republic of); Meshkati, N [Institute of Safety and Systems Management, Los Angeles (United States); Kozuh, M [Josef Stefan Institute, Ljubljana (Slovenia)

1996-12-31

Human error has been recognized as the main contributor to the occurrence of incidents in large technological systems such as nuclear power plants. Recent researches have concluded that human errors are unavoidable side effects of exploration of acceptable performance during adaptation to the unknown changes in the environment. To assist the operators in coping with unforeseen situations, the innovative error tolerant interface systems have been proposed to provide the operators with opportunities to make hypothetical tests without having to carry them out directly on the plant in potentially irreversible conditions. On the other hand, the degree of success of introduction of any new system into a tightly-coupled complex socio-technological system is known to be a great deal dependent upon the degree of harmony of that system with the organization s framework and attitudes. Error tolerant interface systems with features of simplicity, transparency, error detectability and recoverability provide a forgiving cognition environment where the effects of errors are observable and recoverable. The nature of these systems are likely to be more consistent with flexible and rather plain organizational structures, in which static and punitive concepts of human error are modified on the favour of dynamic and adaptive approaches. In this paper the features of error tolerant interface systems are explained and their consistent organizational structures are explored. (author) 11 refs.

User interface design in safety parameter display systems

International Nuclear Information System (INIS)

Schultz, E.E. Jr.; Johnson, G.L.

1988-01-01

The extensive installation of computerized safety Parameter Display Systems (SPDSs) in nuclear power plants since the Three-Mile Island accident has enhanced plant safety. It has also raised new issues of how best to ensure an effective interface between human operators and the plant via computer systems. New developments in interface technologies since the current generation of SPDSs was installed can contribute to improving display interfaces. These technologies include new input devices, three-dimensional displays, delay indicators, and auditory displays. Examples of how they might be applied to improve current SPDSs are given. These examples illustrate how the new use interface technology could be applied to future nuclear plant displays

A Novel Wearable Forehead EOG Measurement System for Human Computer Interfaces.

Science.gov (United States)

Heo, Jeong; Yoon, Heenam; Park, Kwang Suk

2017-06-23

Amyotrophic lateral sclerosis (ALS) patients whose voluntary muscles are paralyzed commonly communicate with the outside world using eye movement. There have been many efforts to support this method of communication by tracking or detecting eye movement. An electrooculogram (EOG), an electro-physiological signal, is generated by eye movements and can be measured with electrodes placed around the eye. In this study, we proposed a new practical electrode position on the forehead to measure EOG signals, and we developed a wearable forehead EOG measurement system for use in Human Computer/Machine interfaces (HCIs/HMIs). Four electrodes, including the ground electrode, were placed on the forehead. The two channels were arranged vertically and horizontally, sharing a positive electrode. Additionally, a real-time eye movement classification algorithm was developed based on the characteristics of the forehead EOG. Three applications were employed to evaluate the proposed system: a virtual keyboard using a modified Bremen BCI speller and an automatic sequential row-column scanner, and a drivable power wheelchair. The mean typing speeds of the modified Bremen brain-computer interface (BCI) speller and automatic row-column scanner were 10.81 and 7.74 letters per minute, and the mean classification accuracies were 91.25% and 95.12%, respectively. In the power wheelchair demonstration, the user drove the wheelchair through an 8-shape course without collision with obstacles.

Advanced human-system interface design review guideline. Evaluation procedures and guidelines for human factors engineering reviews

Energy Technology Data Exchange (ETDEWEB)

O`Hara, J.M.; Brown, W.S. [Brookhaven National Lab., Upton, NY (United States); Baker, C.C.; Welch, D.L.; Granda, T.M.; Vingelis, P.J. [Carlow International Inc., Falls Church, VA (United States)

1994-07-01

Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator`s overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support. NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use.

Advanced human-system interface design review guideline. Evaluation procedures and guidelines for human factors engineering reviews

International Nuclear Information System (INIS)

O'Hara, J.M.; Brown, W.S.; Baker, C.C.; Welch, D.L.; Granda, T.M.; Vingelis, P.J.

1994-07-01

Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support. NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use

The earliest evidence for anatomically modern humans in northwestern Europe.

Science.gov (United States)

Higham, Tom; Compton, Tim; Stringer, Chris; Jacobi, Roger; Shapiro, Beth; Trinkaus, Erik; Chandler, Barry; Gröning, Flora; Collins, Chris; Hillson, Simon; O'Higgins, Paul; FitzGerald, Charles; Fagan, Michael

2011-11-02

The earliest anatomically modern humans in Europe are thought to have appeared around 43,000-42,000 calendar years before present (43-42 kyr cal BP), by association with Aurignacian sites and lithic assemblages assumed to have been made by modern humans rather than by Neanderthals. However, the actual physical evidence for modern humans is extremely rare, and direct dates reach no farther back than about 41-39 kyr cal BP, leaving a gap. Here we show, using stratigraphic, chronological and archaeological data, that a fragment of human maxilla from the Kent's Cavern site, UK, dates to the earlier period. The maxilla (KC4), which was excavated in 1927, was initially diagnosed as Upper Palaeolithic modern human. In 1989, it was directly radiocarbon dated by accelerator mass spectrometry to 36.4-34.7 kyr cal BP. Using a Bayesian analysis of new ultrafiltered bone collagen dates in an ordered stratigraphic sequence at the site, we show that this date is a considerable underestimate. Instead, KC4 dates to 44.2-41.5 kyr cal BP. This makes it older than any other equivalently dated modern human specimen and directly contemporary with the latest European Neanderthals, thus making its taxonomic attribution crucial. We also show that in 13 dental traits KC4 possesses modern human rather than Neanderthal characteristics; three other traits show Neanderthal affinities and a further seven are ambiguous. KC4 therefore represents the oldest known anatomically modern human fossil in northwestern Europe, fills a key gap between the earliest dated Aurignacian remains and the earliest human skeletal remains, and demonstrates the wide and rapid dispersal of early modern humans across Europe more than 40 kyr ago. ©2011 Macmillan Publishers Limited. All rights reserved

Human-machine interfaces based on EMG and EEG applied to robotic systems

Directory of Open Access Journals (Sweden)

Sarcinelli-Filho Mario

2008-03-01

Full Text Available Abstract Background Two different Human-Machine Interfaces (HMIs were developed, both based on electro-biological signals. One is based on the EMG signal and the other is based on the EEG signal. Two major features of such interfaces are their relatively simple data acquisition and processing systems, which need just a few hardware and software resources, so that they are, computationally and financially speaking, low cost solutions. Both interfaces were applied to robotic systems, and their performances are analyzed here. The EMG-based HMI was tested in a mobile robot, while the EEG-based HMI was tested in a mobile robot and a robotic manipulator as well. Results Experiments using the EMG-based HMI were carried out by eight individuals, who were asked to accomplish ten eye blinks with each eye, in order to test the eye blink detection algorithm. An average rightness rate of about 95% reached by individuals with the ability to blink both eyes allowed to conclude that the system could be used to command devices. Experiments with EEG consisted of inviting 25 people (some of them had suffered cases of meningitis and epilepsy to test the system. All of them managed to deal with the HMI in only one training session. Most of them learnt how to use such HMI in less than 15 minutes. The minimum and maximum training times observed were 3 and 50 minutes, respectively. Conclusion Such works are the initial parts of a system to help people with neuromotor diseases, including those with severe dysfunctions. The next steps are to convert a commercial wheelchair in an autonomous mobile vehicle; to implement the HMI onboard the autonomous wheelchair thus obtained to assist people with motor diseases, and to explore the potentiality of EEG signals, making the EEG-based HMI more robust and faster, aiming at using it to help individuals with severe motor dysfunctions.

User interface design principles for the SSM/PMAD automated power system

International Nuclear Information System (INIS)

Jakstas, L.M.; Myers, C.J.

1991-01-01

Computer-human interfaces are an integral part of developing software for spacecraft power systems. A well designed and efficient user interface enables an engineer to effectively operate the system, while it concurrently prevents the user from entering data which is beyond boundary conditions or performing operations which are out of context. A user interface should also be designed to ensure that the engineer easily obtains all useful and critical data for operating the system and is aware of all faults and states in the system. Martin Marietta, under contract to NASA George C. Marshall Space Flight Center, has developed a user interface for the Space Station Module Power Management and Distribution (SSM/PMAD) automated power system testbed which provides human access to the functionality of the power system, as well as exemplifying current techniques in user interface design. The testbed user interface was designed to enable an engineer to operate the system easily without having significant knowledge of computer systems, as well as provide an environment in which the engineer can monitor and interact with the SSM/PMAD system hardware. The design of the interface supports a global view of the most important data form the various hardware and software components, as well as enabling the user to obtain additional or more detailed data when needed. The components and representations of the SSM/PMAD testbed user interface are examined in this paper. An engineer's interactions with the system are also described

Human-system interfaces for the ABWR control room

International Nuclear Information System (INIS)

Gutierrez, R.; O'Neil, T.J.

1993-01-01

The 1300-MW(electric) advanced boiling water reactor (ABWR) design has been developed by General Electric Co. (G.E.) and its technical associates, Hitachi Ltd. and Toshiba Corporation, under the sponsorship of the Tokyo Electric Power Company. Key features of the ABWR include simplification, improved safety and reliability, reduced occupational exposure and radwaste, improved maneuverability, and reduced construction, fuel, and operating costs. The ABWR incorporates the best proven features from BWR designs in Japan, Europe, and the United States, combined with the broad-scope application of leading-edge technology. The first application of the ABWR design will be at TEP-CO's Kashiwazaki-Kariwa nuclear power station units 6 and 7, which are scheduled to begin commercial operation in 1996 and 1997, respectively. The ABWR is also the lead plant in the U.S. standard plant design certification program. It is scheduled to receive final approval from the U.S. Nuclear Regulatory Commission in early 1994. The development of the human system interaces (HSI) for the ABWR is an extension of the operating experience of existing man-machine interfaces currently being used at GE-designed plants

Evaluation of operators' mental workload of human-system interface automation in the advanced nuclear power plants

International Nuclear Information System (INIS)

Jou, Y.-T.; Yenn, T.-C.; Lin, Chiuhsiang Joe; Yang, C.-W.; Chiang, C.-C.

2009-01-01

It has been expected that the automation of certain tasks in a control room would help decrease operators' mental workload, enhance situation awareness, and improve the whole system performance. However, there have been too many automation-induced system failures that would warrant a fresh look on the influences of automation. Automation problems include the reduction in the operator's system awareness, an increase in monitoring workload, and the degradation in manual skills. This study evaluates operators' mental workload and system performance during a human-system interface (HSI) automation in an advanced nuclear power plant (NPP). The reactor shutdown task and alarm reset task simulations were conducted in this study to evaluate operators' mental workload and performance. The results of this study indicated that for ensuring safe operating in NPPs, the design of automation needs to be carefully implemented. Task characteristics and degrees of automation should be carefully evaluated while designing HSIs. The reactor shutdown tasks studied in this paper suggest that a high level of automation design for the long period and low workload would be sufficient. On the other hand, the degree of automation of alarm reset task does not show a significant difference to the operator's mental workload. In conclusion, the human-system interface automation in advanced NPPs is suggested to be more flexible and needs to be continually improved.

Design for the human-machine interface of a digitalized reactor control-room

International Nuclear Information System (INIS)

Qu Ronghong; Zhang Liangju; Li Duo; Yu Hui

2005-01-01

Digitalized technology is implemented in the instrumentation and control system of an in-construction research reactor, which advances information display in both contents and styles in a nuclear reactor control-room, and greatly improves human-machine interface. In the design for a digitalized nuclear reactor control-room there are a series of new problems and technologies should be considered seriously. This paper mainly introduces the design for the digitalized control-room of the research nuclear reactor and covered topics include design principle of human-machine interface, organization and classification of interface graphics, technologies and principles based on human factors engineering and implemented in the graphics design. (authors)

The evolution of modern human brain shape

Science.gov (United States)

Neubauer, Simon; Hublin, Jean-Jacques; Gunz, Philipp

2018-01-01

Modern humans have large and globular brains that distinguish them from their extinct Homo relatives. The characteristic globularity develops during a prenatal and early postnatal period of rapid brain growth critical for neural wiring and cognitive development. However, it remains unknown when and how brain globularity evolved and how it relates to evolutionary brain size increase. On the basis of computed tomographic scans and geometric morphometric analyses, we analyzed endocranial casts of Homo sapiens fossils (N = 20) from different time periods. Our data show that, 300,000 years ago, brain size in early H. sapiens already fell within the range of present-day humans. Brain shape, however, evolved gradually within the H. sapiens lineage, reaching present-day human variation between about 100,000 and 35,000 years ago. This process started only after other key features of craniofacial morphology appeared modern and paralleled the emergence of behavioral modernity as seen from the archeological record. Our findings are consistent with important genetic changes affecting early brain development within the H. sapiens lineage since the origin of the species and before the transition to the Later Stone Age and the Upper Paleolithic that mark full behavioral modernity. PMID:29376123

The evolution of modern human brain shape.

Science.gov (United States)

Neubauer, Simon; Hublin, Jean-Jacques; Gunz, Philipp

2018-01-01

Modern humans have large and globular brains that distinguish them from their extinct Homo relatives. The characteristic globularity develops during a prenatal and early postnatal period of rapid brain growth critical for neural wiring and cognitive development. However, it remains unknown when and how brain globularity evolved and how it relates to evolutionary brain size increase. On the basis of computed tomographic scans and geometric morphometric analyses, we analyzed endocranial casts of Homo sapiens fossils ( N = 20) from different time periods. Our data show that, 300,000 years ago, brain size in early H. sapiens already fell within the range of present-day humans. Brain shape, however, evolved gradually within the H. sapiens lineage, reaching present-day human variation between about 100,000 and 35,000 years ago. This process started only after other key features of craniofacial morphology appeared modern and paralleled the emergence of behavioral modernity as seen from the archeological record. Our findings are consistent with important genetic changes affecting early brain development within the H. sapiens lineage since the origin of the species and before the transition to the Later Stone Age and the Upper Paleolithic that mark full behavioral modernity.

No evidence of Neandertal mtDNA contribution to early modern humans.

Directory of Open Access Journals (Sweden)

David Serre

2004-03-01

Full Text Available The retrieval of mitochondrial DNA (mtDNA sequences from four Neandertal fossils from Germany, Russia, and Croatia has demonstrated that these individuals carried closely related mtDNAs that are not found among current humans. However, these results do not definitively resolve the question of a possible Neandertal contribution to the gene pool of modern humans since such a contribution might have been erased by genetic drift or by the continuous influx of modern human DNA into the Neandertal gene pool. A further concern is that if some Neandertals carried mtDNA sequences similar to contemporaneous humans, such sequences may be erroneously regarded as modern contaminations when retrieved from fossils. Here we address these issues by the analysis of 24 Neandertal and 40 early modern human remains. The biomolecular preservation of four Neandertals and of five early modern humans was good enough to suggest the preservation of DNA. All four Neandertals yielded mtDNA sequences similar to those previously determined from Neandertal individuals, whereas none of the five early modern humans contained such mtDNA sequences. In combination with current mtDNA data, this excludes any large genetic contribution by Neandertals to early modern humans, but does not rule out the possibility of a smaller contribution.

APPLICATION OF EYE TRACKING FOR MEASUREMENT AND EVALUATION IN HUMAN FACTORS STUDIES IN CONTROL ROOM MODERNIZATION

Energy Technology Data Exchange (ETDEWEB)

Kovesdi, C.; Spielman, Z.; LeBlanc, K.; Rice, B.

2017-05-01

An important element of human factors engineering (HFE) pertains to measurement and evaluation (M&E). The role of HFE-M&E should be integrated throughout the entire control room modernization (CRM) process and be used for human-system performance evaluation and diagnostic purposes with resolving potential human engineering deficiencies (HEDs) and other human machine interface (HMI) design issues. NUREG-0711 describes how HFE in CRM should employ a hierarchical set of measures, particularly during integrated system validation (ISV), including plant performance, personnel task performance, situation awareness, cognitive workload, and anthropometric/ physiological factors. Historically, subjective measures have been primarily used since they are easier to collect and do not require specialized equipment. However, there are pitfalls with relying solely on subjective measures in M&E such that negatively impact reliability, sensitivity, and objectivity. As part of comprehensively capturing a diverse set of measures that strengthen findings and inferences made of the benefits from emerging technologies like advanced displays, this paper discusses the value of using eye tracking as an objective method that can be used in M&E. A brief description of eye tracking technology and relevant eye tracking measures is provided. Additionally, technical considerations and the unique challenges with using eye tracking in full-scaled simulations are addressed. Finally, this paper shares preliminary findings regarding the use of a wearable eye tracking system in a full-scale simulator study. These findings should help guide future full-scale simulator studies using eye tracking as a methodology to evaluate human-system performance.

Intelligent Human Machine Interface Design for Advanced Product Life Cycle Management Systems

OpenAIRE

Ahmed, Zeeshan

2010-01-01

Designing and implementing an intelligent and user friendly human machine interface for any kind of software or hardware oriented application is always be a challenging task for the designers and developers because it is very difficult to understand the psychology of the user, nature of the work and best suit of the environment. This research paper is basically about to propose an intelligent, flexible and user friendly machine interface for Product Life Cycle Management products or PDM Syste...

Development of user interface to support automatic program generation of nuclear power plant analysis by module-based simulation system

International Nuclear Information System (INIS)

Yoshikawa, Hidekazu; Mizutani, Naoki; Nakaya, Ken-ichiro; Wakabayashi, Jiro

1988-01-01

Module-based Simulation System (MSS) has been developed to realize a new software work environment enabling versatile dynamic simulation of a complex nuclear power system flexibly. The MSS makes full use of modern software technology to replace a large fraction of human software works in complex, large-scale program development by computer automation. Fundamental methods utilized in MSS and developmental study on human interface system SESS-1 to help users in generating integrated simulation programs automatically are summarized as follows: (1) To enhance usability and 'communality' of program resources, the basic mathematical models of common usage in nuclear power plant analysis are programed as 'modules' and stored in a module library. The information on usage of individual modules are stored in module database with easy registration, update and retrieval by the interactive management system. (2) Target simulation programs and the input/output files are automatically generated with simple block-wise languages by a precompiler system for module integration purpose. (3) Working time for program development and analysis in an example study of an LMFBR plant thermal-hydraulic transient analysis was demonstrated to be remarkably shortened, with the introduction of an interface system SESS-1 developed as an automatic program generation environment. (author)

A RESTful interface to pseudonymization services in modern web applications.

Science.gov (United States)

Lablans, Martin; Borg, Andreas; Ückert, Frank

2015-02-07

Medical research networks rely on record linkage and pseudonymization to determine which records from different sources relate to the same patient. To establish informational separation of powers, the required identifying data are redirected to a trusted third party that has, in turn, no access to medical data. This pseudonymization service receives identifying data, compares them with a list of already reported patient records and replies with a (new or existing) pseudonym. We found existing solutions to be technically outdated, complex to implement or not suitable for internet-based research infrastructures. In this article, we propose a new RESTful pseudonymization interface tailored for use in web applications accessed by modern web browsers. The interface is modelled as a resource-oriented architecture, which is based on the representational state transfer (REST) architectural style. We translated typical use-cases into resources to be manipulated with well-known HTTP verbs. Patients can be re-identified in real-time by authorized users' web browsers using temporary identifiers. We encourage the use of PID strings for pseudonyms and the EpiLink algorithm for record linkage. As a proof of concept, we developed a Java Servlet as reference implementation. The following resources have been identified: Sessions allow data associated with a client to be stored beyond a single request while still maintaining statelessness. Tokens authorize for a specified action and thus allow the delegation of authentication. Patients are identified by one or more pseudonyms and carry identifying fields. Relying on HTTP calls alone, the interface is firewall-friendly. The reference implementation has proven to be production stable. The RESTful pseudonymization interface fits the requirements of web-based scenarios and allows building applications that make pseudonymization transparent to the user using ordinary web technology. The open-source reference implementation implements the

Light Water Reactor Sustainability Program Operator Performance Metrics for Control Room Modernization: A Practical Guide for Early Design Evaluation

Energy Technology Data Exchange (ETDEWEB)

Ronald Boring; Roger Lew; Thomas Ulrich; Jeffrey Joe

2014-03-01

As control rooms are modernized with new digital systems at nuclear power plants, it is necessary to evaluate the operator performance using these systems as part of a verification and validation process. There are no standard, predefined metrics available for assessing what is satisfactory operator interaction with new systems, especially during the early design stages of a new system. This report identifies the process and metrics for evaluating human system interfaces as part of control room modernization. The report includes background information on design and evaluation, a thorough discussion of human performance measures, and a practical example of how the process and metrics have been used as part of a turbine control system upgrade during the formative stages of design. The process and metrics are geared toward generalizability to other applications and serve as a template for utilities undertaking their own control room modernization activities.

The Effect of Degraded Digital Instrumentation and Control systems on Human-system Interfaces and Operator Performance

International Nuclear Information System (INIS)

O'Hara, J.M.; Gunther, B.; Martinez-Guridi, G.; Xing, J.; Barnes, V.

2010-01-01

Integrated digital instrumentation and control (I and C) systems in new and advanced nuclear power plants (NPPs) will support operators in monitoring and controlling the plants. Even though digital systems typically are expected to be reliable, their potential for degradation or failure significantly could affect the operators performance and, consequently, jeopardize plant safety. This U.S. Nuclear Regulatory Commission (NRC) research investigated the effects of degraded I and C systems on human performance and on plant operations. The objective was to develop technical basis and guidance for human factors engineering (HFE) reviews addressing the operator's ability to detect and manage degraded digital I and C conditions. We reviewed pertinent standards and guidelines, empirical studies, and plant operating experience. In addition, we evaluated the potential effects of selected failure modes of the digital feedwater control system of a currently operating pressurized water reactor (PWR) on human-system interfaces (HSIs) and the operators performance. Our findings indicated that I and C degradations are prevalent in plants employing digital systems, and the overall effects on the plant's behavior can be significant, such as causing a reactor trip or equipment to operate unexpectedly. I and C degradations may affect the HSIs used by operators to monitor and control the plant. For example, deterioration of the sensors can complicate the operators interpretation of displays, and sometimes may mislead them by making it appear that a process disturbance has occurred. We used the findings as the technical basis upon which to develop HFE review guidance.

Graphic Interface for the Gearhart-Owen 3500 Uranium Logging System

International Nuclear Information System (INIS)

Haller, I; Mendieta, C; Tenzi, A

2000-01-01

This work presents the design and development of a computing graphic interface in order to modernize the data acquisition of an old Gearhart-Owen uranium logging system.The paper describes the different items involved in the project: the system hardware developed to carry out the signal conditioning and data digitization the system software, which performs the monitoring and storing of the updated information.Finally, we compare the results of de recent field measurements with the previous one obtained with the original equipment and show the feasibility of the project

Telephone based speech interfaces in the developing world, from the perspective of human-human communication

CSIR Research Space (South Africa)

Naidoo, S

2005-07-01

Full Text Available recently, before computers systems were able to synthesize or recognize speech, speech was a capability unique to humans. The human brain has developed to differentiate between human speech and other audio occurrences. Therefore, the slowly- evolving... human brain reacts in certain ways to voice stimuli, and has certain expectations regarding communication by voice. Nass affirms that the human brain operates using the same mechanisms when interacting with speech interfaces as when conversing...

Current Approaches for Control Room I and C Modernization

International Nuclear Information System (INIS)

Lopez, Alberto; Jimenez, Alfonso

2002-01-01

In general, instrumentation and control (I and C) systems for nuclear power plants were made using analogic systems and relays, since this was the only technology available by the time these systems were designed. This fact impacts on the operational and maintenance capabilities required to these systems. For this reason, nuclear power plants are facing nowadays two challenges: on one hand, the obsolescence of these systems contributes to the increase in the operation and maintenance costs - due to the difficulties for getting spare parts and support from the system vendors -. On the other hand, there has been an increase in the utilities competitiveness due to the electric power market liberalization. All this, of course, along with the commitment to maintain the current safety levels and meet the new requirements and standards that may arise in the near future. The application of current technologies, especially digital technology, solves the obsolescence problems and allows for a more functional and updated human-machine interface. Nevertheless, the cost associated to these modifications makes it necessary to develop strategies to determine which systems need to be modified and how to implement modifications effectively, so that these systems can work jointly with others using different technologies. Other issues inherent to digital technology must be considered, such as verification and validation of the software and of the human-machine interface, which are required for its licensing. This presentation describes the current approaches for I and C modernization, the main reasons, technologies and implementation plans, focusing on the control room and on the impact on operations. The main issues to be considered for developing a specific modernization plan are analysed. The goals and status of the 'Feasibility Study of the Control Room I and C Modernization' are described. This study is currently being developed by Endesa, Iberdrola and Tecnatom, and is included

Evaluation method of human-system interface for nuclear power plants

International Nuclear Information System (INIS)

Tanji, Junichi; Kawai, Jun; Masui, Takao; Ezaki, Ikuko

2000-01-01

We have developed HSI evaluation method based on a model of human cognitive processes in order to provide the viewpoint of the evaluation on the operability of interface. The model describes systematically the human error categories of GEMS by Reason. Based on the model together with reference to the other published information such as NUREG-0700Rev.1, the evaluation items for HSI have embodied in the electronic handbook HIBISCUS. The applicability of HIBISCUS have been assessed by evaluating experimental results using a simulator equipped with control panel using CRTs and touch operations. From the results, the usefulness of the handbook has been confirmed. (author)

Evaluation method of human-system interface for nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Tanji, Junichi [Nuclear Power Engineering Corp. (NUPEC), Tokyo (Japan); Kawai, Jun; Masui, Takao; Ezaki, Ikuko [Mitsubishi Research Inst., Tokyo (Japan)

2000-10-01

We have developed HSI evaluation method based on a model of human cognitive processes in order to provide the viewpoint of the evaluation on the operability of interface. The model describes systematically the human error categories of GEMS by Reason. Based on the model together with reference to the other published information such as NUREG-0700Rev.1, the evaluation items for HSI have embodied in the electronic handbook HIBISCUS. The applicability of HIBISCUS have been assessed by evaluating experimental results using a simulator equipped with control panel using CRTs and touch operations. From the results, the usefulness of the handbook has been confirmed. (author)

Advanced control room design review guidelines: Integration of the NUREG-0700 guidelines and development of new human-system interface guidelines

Energy Technology Data Exchange (ETDEWEB)

Carter, R.J.

1997-07-01

This report documents the work conducted in four tasks of the Nuclear Regulatory Commission (NRC) project entitled Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation. The purpose of the first task was to integrate the applicable sections of NUREG-0700 into the advanced control room design review (ACRDR) guidelines to ensure that all applicable guidelines are together in one document and conveniently accessible to users. The primary objective of the second task was to formulate a strategy for the development of new ACRDR guidelines that have not otherwise been identified. The main focus of the third task was to modify the individual ACRDR guidelines generated to date to ensure that they are suitable for the intended nuclear power plant (NPP) control station system application. The goal of the fourth task was to develop human factors guidelines for two human-system interface categories that are missing from the current ACRDR guidelines document. During the first task those areas in NUREG-0700 that are not addressed by the ACRDR guidelines document were identified, the areas were subsequently reviewed against six recent industry human factors engineering review guidelines, and the NUREG-0700 guidelines were updated as necessary. In the second task 13 general categories of human-system interface guidelines that are either missing from or not adequately addressed by the ACRDR document were discovered. An approach was derived for the development of new ACRDR guidelines, a preliminary assessment of the available sources that may be useful in the creation of new guidelines and their applicability to the identified human-system interface categories was performed, and an estimate was made of the amount of time and level of effort required to complete the development of needed new ACRDR guidelines. During the third task those NPP control station systems to which the NUREG-0700 and ACRDR guidelines apply were identified, matrices of such

Advanced control room design review guidelines: Integration of the NUREG-0700 guidelines and development of new human-system interface guidelines

International Nuclear Information System (INIS)

Carter, R.J.

1997-07-01

This report documents the work conducted in four tasks of the Nuclear Regulatory Commission (NRC) project entitled Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation. The purpose of the first task was to integrate the applicable sections of NUREG-0700 into the advanced control room design review (ACRDR) guidelines to ensure that all applicable guidelines are together in one document and conveniently accessible to users. The primary objective of the second task was to formulate a strategy for the development of new ACRDR guidelines that have not otherwise been identified. The main focus of the third task was to modify the individual ACRDR guidelines generated to date to ensure that they are suitable for the intended nuclear power plant (NPP) control station system application. The goal of the fourth task was to develop human factors guidelines for two human-system interface categories that are missing from the current ACRDR guidelines document. During the first task those areas in NUREG-0700 that are not addressed by the ACRDR guidelines document were identified, the areas were subsequently reviewed against six recent industry human factors engineering review guidelines, and the NUREG-0700 guidelines were updated as necessary. In the second task 13 general categories of human-system interface guidelines that are either missing from or not adequately addressed by the ACRDR document were discovered. An approach was derived for the development of new ACRDR guidelines, a preliminary assessment of the available sources that may be useful in the creation of new guidelines and their applicability to the identified human-system interface categories was performed, and an estimate was made of the amount of time and level of effort required to complete the development of needed new ACRDR guidelines. During the third task those NPP control station systems to which the NUREG-0700 and ACRDR guidelines apply were identified, matrices of such

How different are the Kebara 2 ribs to modern humans?

Science.gov (United States)

Chapman, Tara; Beyer, Benoît; Sholukha, Victor; Semal, Patrick; Feipel, Veronique; Louryan, Stéphane; Van Sint Jan, Serge

2017-12-30

This study analyses rib geometric parameters of individual ribs of 14 modern human subjects (7 males and 7 females) in comparison to the reconstructed ribs of the Kebara 2 skeleton which was taken from the reconstruction of a Neandertal thorax by Sawyer & Maley (2005). Three-dimensional (3D) models were segmented from CT scans and each rib vertex cloud was placed into a local coordinate system defined from the rib principal axes. Rib clouds were then analysed using best fitting ellipses of the external contours of the cross-section areas. The centroid of each ellipse was then used to measure the centroidal pathway between each slice (rib midline). Curvature of the ribs was measured from the mid-line of the ribs as the sum of angles between successive centroids in adjacent cross sections. Distinct common patterns were noted in all rib geometric parameters for modern humans. The Kebara 2 reconstructed ribs also followed the same patterns. This study demonstrated that there are differences between the sexes in rib geometrical parameters, with females showing smaller rib width, chord length and arc length, but greater curvature (rib torsion, rib axial curvature, rib anterior-posterior bending) than males. The Kebara 2 reconstructed ribs were within the modern human range for the majority of geometrical parameters.

Searching for ancient balanced polymorphisms shared between Neanderthals and Modern Humans

Directory of Open Access Journals (Sweden)

Lucas Henriques Viscardi

Full Text Available Abstract Hominin evolution is characterized by adaptive solutions often rooted in behavioral and cognitive changes. If balancing selection had an important and long-lasting impact on the evolution of these traits, it can be hypothesized that genes associated with them should carry an excess of shared polymorphisms (trans- SNPs across recent Homo species. In this study, we investigate the role of balancing selection in human evolution using available exomes from modern (Homo sapiens and archaic humans (H. neanderthalensis and Denisovan for an excess of trans-SNP in two gene sets: one associated with the immune system (IMMS and another one with behavioral system (BEHS. We identified a significant excess of trans-SNPs in IMMS (N=547, of which six of these located within genes previously associated with schizophrenia. No excess of trans-SNPs was found in BEHS, but five genes in this system harbor potential signals for balancing selection and are associated with psychiatric or neurodevelopmental disorders. Our approach evidenced recent Homo trans-SNPs that have been previously implicated in psychiatric diseases such as schizophrenia, suggesting that a genetic repertoire common to the immune and behavioral systems could have been maintained by balancing selection starting before the split between archaic and modern humans.

Human-machine interface (HMI) report for 241-SY-101 data acquisition system (DACS) upgrade study

International Nuclear Information System (INIS)

Truitt, R.W.

1997-01-01

This report provides an independent evaluation of information for a Windows based Human Machine Interface (HMI) to replace the existing DOS based Iconics HMI currently used in the Data Acquisition and Control System (DACS) used at Tank 241-SY-101. A fundamental reason for this evaluation is because of the difficulty of maintaining the system with obsolete, unsupported software. The DACS uses a software operator interface (Genesis for DOS HMI) that is no longer supported by its manufacturer, Iconics. In addition to its obsolescence, it is complex and difficult to train additional personnel on. The FY 1997 budget allocated $40K for phase 1 of a software/hardware upgrade that would have allowed the old DOS based system to be replaced by a current Windows based system. Unfortunately, budget constraints during FY 1997 has prompted deferral of the upgrade. The upgrade needs to be performed at the earliest possible time, before other failures render the system useless. Once completed, the upgrade could alleviate other concerns: spare pump software may be able to be incorporated into the same software as the existing pump, thereby eliminating the parallel path dilemma; and the newer, less complex software should expedite training of future personnel, and in the process, require that less technical time be required to maintain the system

Man-machine interfaces analysis system based on computer simulation

International Nuclear Information System (INIS)

Chen Xiaoming; Gao Zuying; Zhou Zhiwei; Zhao Bingquan

2004-01-01

The paper depicts a software assessment system, Dynamic Interaction Analysis Support (DIAS), based on computer simulation technology for man-machine interfaces (MMI) of a control room. It employs a computer to simulate the operation procedures of operations on man-machine interfaces in a control room, provides quantified assessment, and at the same time carries out analysis on operational error rate of operators by means of techniques for human error rate prediction. The problems of placing man-machine interfaces in a control room and of arranging instruments can be detected from simulation results. DIAS system can provide good technical supports to the design and improvement of man-machine interfaces of the main control room of a nuclear power plant

Interface of data transmission for a transcutaneous communication system using the human body as transmission medium.

Science.gov (United States)

Okamoto, Eiji; Kato, Yoshikuni; Seino, Kazuyuki; Mitamura, Yoshinori

2012-03-01

We have been developing a new transcutaneous communication system (TCS) that uses the human body as an electrical conductive medium. We studied an interface circuit of the TCS in order to optimize the leading data current into the human body effectively. Two types of LC circuits were examined for the interface circuit, one was an LC series-parallel circuit, and the other was a parallel-connected LC circuit. The LC series-parallel circuit connected to the body could be tuned to a resonant frequency, and the frequency was determined by the values of an external inductor and an external capacitor. Permittivity of the body did not influence the electrical resonance. Connection of the LC series-parallel circuit to the body degraded the quality factor Q because of the conductivity of the body. However, the LC parallel-connected circuit when connected to the body did not indicate electrical resonance. The LC series-parallel circuit restricts a direct current and a low-frequency current to flow into the body; thus, it can prevent a patient from getting a shock. According to the above results, an LC series-parallel circuit is an optimum interface circuit between the TCS and the body for leading data current into the body effectively and safely.

A Function-Behavior-State Approach to Designing Human Machine Interface for Nuclear Power Plant Operators

Science.gov (United States)

Lin, Y.; Zhang, W. J.

2005-02-01

This paper presents an approach to human-machine interface design for control room operators of nuclear power plants. The first step in designing an interface for a particular application is to determine information content that needs to be displayed. The design methodology for this step is called the interface design framework (called framework ). Several frameworks have been proposed for applications at varying levels, including process plants. However, none is based on the design and manufacture of a plant system for which the interface is designed. This paper presents an interface design framework which originates from design theory and methodology for general technical systems. Specifically, the framework is based on a set of core concepts of a function-behavior-state model originally proposed by the artificial intelligence research community and widely applied in the design research community. Benefits of this new framework include the provision of a model-based fault diagnosis facility, and the seamless integration of the design (manufacture, maintenance) of plants and the design of human-machine interfaces. The missing linkage between design and operation of a plant was one of the causes of the Three Mile Island nuclear reactor incident. A simulated plant system is presented to explain how to apply this framework in designing an interface. The resulting human-machine interface is discussed; specifically, several fault diagnosis examples are elaborated to demonstrate how this interface could support operators' fault diagnosis in an unanticipated situation.

The Ozone Widget Framework: towards modularity of C2 human interfaces

Science.gov (United States)

Hellar, David Benjamin; Vega, Laurian C.

2012-05-01

The Ozone Widget Framework (OWF) is a common webtop environment for distribution across the enterprise. A key mission driver for OWF is to enable rapid capability delivery by lowering time-to-market with lightweight components. OWF has been released as Government Open Source Software and has been deployed in a variety of C2 net-centric contexts ranging from real-time analytics, cyber-situational awareness, to strategic and operational planning. This paper discusses the current and future evolution of OWF including the availability of the OZONE Marketplace (OMP), useractivity driven metrics, and architecture enhancements for accessibility. Together, OWF is moving towards the rapid delivery of modular human interfaces supporting modern and future command and control contexts.

The Pb isotopic record of historical to modern human lead exposure

International Nuclear Information System (INIS)

Kamenov, George D.; Gulson, Brian L.

2014-01-01

Human teeth and bones incorporate trace amounts of lead (Pb) from the local environment during growth and remodeling. Anthropogenic activities have caused changes in the natural Pb isotopic background since historical times and this is reflected in the Pb isotopes of historical European teeth. Lead mining and use increased exponentially during the last century and the isotopic compositions of modern human teeth reflect the modern anthropogenic Pb. USA teeth show the most radiogenic Pb and Australian teeth show the least radiogenic Pb, a result of different Pb ores used in the two regions. During the last century the Australian Pb was exported to Europe, Asia, South America, and Africa, resulting in swamping of the local environmental Pb signal by the imported Pb. As a result, the modern human teeth in Europe show a significant drop to lower isotopic values compared with historical times. Similarly, modern human teeth in other regions of the world show similar Pb isotopic ratios to modern European teeth reflecting the Pb imports. The specific pattern of human Pb exposure allows us to use the Pb isotopic signal recorded in the skeleton as a geo-referencing tool. As historical European teeth show a distinct Pb signal, we can identify early European skeletal remains in the New World and likely elsewhere. In modern forensic investigations we can discriminate to some extent Eastern Europeans from Western and Northern Europeans. Australians can be identified to some extent in any region in the world, although there is some overlap with Western European individuals. Lead isotopes can be used to easily identify foreigners in the USA, as modern USA teeth are distinct from any other region of the world. By analogy, USA individuals can be identified virtually in any other region of the world. - Highlights: • We present high-precision Pb isotope data for historical and modern human teeth. • Human teeth reflect human Pb exposure since historical times. • Modern teeth show

The Pb isotopic record of historical to modern human lead exposure

Energy Technology Data Exchange (ETDEWEB)

Kamenov, George D., E-mail: kamenov@ufl.edu [Department of Geological Sciences, University of Florida, 241 Williamson Hall, Gainesville, FL 32611 (United States); Gulson, Brian L. [Graduate School of the Environment, Faculty of Science, Macquarie University, Sydney, NSW 2109 (Australia)

2014-08-15

Human teeth and bones incorporate trace amounts of lead (Pb) from the local environment during growth and remodeling. Anthropogenic activities have caused changes in the natural Pb isotopic background since historical times and this is reflected in the Pb isotopes of historical European teeth. Lead mining and use increased exponentially during the last century and the isotopic compositions of modern human teeth reflect the modern anthropogenic Pb. USA teeth show the most radiogenic Pb and Australian teeth show the least radiogenic Pb, a result of different Pb ores used in the two regions. During the last century the Australian Pb was exported to Europe, Asia, South America, and Africa, resulting in swamping of the local environmental Pb signal by the imported Pb. As a result, the modern human teeth in Europe show a significant drop to lower isotopic values compared with historical times. Similarly, modern human teeth in other regions of the world show similar Pb isotopic ratios to modern European teeth reflecting the Pb imports. The specific pattern of human Pb exposure allows us to use the Pb isotopic signal recorded in the skeleton as a geo-referencing tool. As historical European teeth show a distinct Pb signal, we can identify early European skeletal remains in the New World and likely elsewhere. In modern forensic investigations we can discriminate to some extent Eastern Europeans from Western and Northern Europeans. Australians can be identified to some extent in any region in the world, although there is some overlap with Western European individuals. Lead isotopes can be used to easily identify foreigners in the USA, as modern USA teeth are distinct from any other region of the world. By analogy, USA individuals can be identified virtually in any other region of the world. - Highlights: • We present high-precision Pb isotope data for historical and modern human teeth. • Human teeth reflect human Pb exposure since historical times. • Modern teeth show

Insights into Modern Human Prehistory Using Ancient Genomes.

Science.gov (United States)

Yang, Melinda A; Fu, Qiaomei

2018-03-01

The genetic relationship of past modern humans to today's populations and each other was largely unknown until recently, when advances in ancient DNA sequencing allowed for unprecedented analysis of the genomes of these early people. These ancient genomes reveal new insights into human prehistory not always observed studying present-day populations, including greater details on the genetic diversity, population structure, and gene flow that characterized past human populations, particularly in early Eurasia, as well as increased insight on the relationship between archaic and modern humans. Here, we review genetic studies on ∼45000- to 7500-year-old individuals associated with mainly preagricultural cultures found in Eurasia, the Americas, and Africa. Copyright © 2017 Elsevier Ltd. All rights reserved.

Quantitative evaluation of impedance perception characteristics of humans in the man-machine interface

International Nuclear Information System (INIS)

Onish, Keiichi; Kim, Young Woo; Obinata, Goro; Hase, Kazunori

2013-01-01

We investigated impedance perception characteristics of humans in the man-machine interface. Sensibility or operational feel about physical properties of machine dynamics is obtained through perception process. We evaluated the impedance perception characteristics of humans who are operating a mechanical system, based on extended Scheffe's subjective evaluation method in full consideration of the influence of impedance level, impedance difference, experiment order, individual difference and so on. Constant method based quantitative evaluation was adopted to investigate the influence of motion frequency and change of the impedance on human impedance perception characteristics. Experimental results indicate that humans perceive impedance of mechanical systems based on comparison process of the dynamical characteristics of the systems. The proposed method can be applied to quantify the design requirement of man-machine interface. The effectiveness of the proposed method is verified through experimental results.

Quantitative evaluation of impedance perception characteristics of humans in the man-machine interface

Energy Technology Data Exchange (ETDEWEB)

Onish, Keiichi [Yamaha Motor Co., Shizuoka (Japan); Kim, Young Woo [Daegu Techno Park R and D Center, Seoul (Korea, Republic of); Obinata, Goro [Nagoya University, Nagoya (Japan); Hase, Kazunori [Tokyo Metropolitan University, Tokyo (Japan)

2013-05-15

We investigated impedance perception characteristics of humans in the man-machine interface. Sensibility or operational feel about physical properties of machine dynamics is obtained through perception process. We evaluated the impedance perception characteristics of humans who are operating a mechanical system, based on extended Scheffe's subjective evaluation method in full consideration of the influence of impedance level, impedance difference, experiment order, individual difference and so on. Constant method based quantitative evaluation was adopted to investigate the influence of motion frequency and change of the impedance on human impedance perception characteristics. Experimental results indicate that humans perceive impedance of mechanical systems based on comparison process of the dynamical characteristics of the systems. The proposed method can be applied to quantify the design requirement of man-machine interface. The effectiveness of the proposed method is verified through experimental results.

User interface design principles for the SSM/PMAD automated power system

Science.gov (United States)

Jakstas, Laura M.; Myers, Chris J.

1991-01-01

Martin Marietta has developed a user interface for the space station module power management and distribution (SSM/PMAD) automated power system testbed which provides human access to the functionality of the power system, as well as exemplifying current techniques in user interface design. The testbed user interface was designed to enable an engineer to operate the system easily without having significant knowledge of computer systems, as well as provide an environment in which the engineer can monitor and interact with the SSM/PMAD system hardware. The design of the interface supports a global view of the most important data from the various hardware and software components, as well as enabling the user to obtain additional or more detailed data when needed. The components and representations of the SSM/PMAD testbed user interface are examined. An engineer's interactions with the system are also described.

Towards passive brain-computer interfaces: applying brain-computer interface technology to human-machine systems in general.

Science.gov (United States)

Zander, Thorsten O; Kothe, Christian

2011-04-01

Cognitive monitoring is an approach utilizing realtime brain signal decoding (RBSD) for gaining information on the ongoing cognitive user state. In recent decades this approach has brought valuable insight into the cognition of an interacting human. Automated RBSD can be used to set up a brain-computer interface (BCI) providing a novel input modality for technical systems solely based on brain activity. In BCIs the user usually sends voluntary and directed commands to control the connected computer system or to communicate through it. In this paper we propose an extension of this approach by fusing BCI technology with cognitive monitoring, providing valuable information about the users' intentions, situational interpretations and emotional states to the technical system. We call this approach passive BCI. In the following we give an overview of studies which utilize passive BCI, as well as other novel types of applications resulting from BCI technology. We especially focus on applications for healthy users, and the specific requirements and demands of this user group. Since the presented approach of combining cognitive monitoring with BCI technology is very similar to the concept of BCIs itself we propose a unifying categorization of BCI-based applications, including the novel approach of passive BCI.

Human factors evaluation of remote afterloading brachytherapy. Supporting analyses of human-system interfaces, procedures and practices, training and organizational practices and policies. Volume 3

International Nuclear Information System (INIS)

Callan, J.R.; Kelly, R.T.; Quinn, M.L.

1995-07-01

A human factors project on the use of nuclear by-product material to treat cancer using remotely operated afterloaders was undertaken by the Nuclear Regulatory Commission. The purpose of the project was to identify factors that contribute to human error in the system for remote afterloading brachytherapy (RAB). This report documents the findings from the second, third, fourth, and fifth phases of the project, which involved detailed analyses of four major aspects of the RAB system linked to human error: human-system interfaces; procedures and practices; training practices and policies; and organizational practices and policies, respectively. Findings based on these analyses provided factual and conceptual support for the final phase of this project, which identified factors leading to human error in RAB. The impact of those factors on RAB performance was then evaluated and prioritized in terms of safety significance, and alternative approaches for resolving safety significant problems were identified and evaluated

Human factors evaluation of remote afterloading brachytherapy. Supporting analyses of human-system interfaces, procedures and practices, training and organizational practices and policies. Volume 3

Energy Technology Data Exchange (ETDEWEB)

Callan, J.R.; Kelly, R.T.; Quinn, M.L. [Pacific Science & Engineering Group, San Diego, CA (United States)] [and others

1995-07-01

A human factors project on the use of nuclear by-product material to treat cancer using remotely operated afterloaders was undertaken by the Nuclear Regulatory Commission. The purpose of the project was to identify factors that contribute to human error in the system for remote afterloading brachytherapy (RAB). This report documents the findings from the second, third, fourth, and fifth phases of the project, which involved detailed analyses of four major aspects of the RAB system linked to human error: human-system interfaces; procedures and practices; training practices and policies; and organizational practices and policies, respectively. Findings based on these analyses provided factual and conceptual support for the final phase of this project, which identified factors leading to human error in RAB. The impact of those factors on RAB performance was then evaluated and prioritized in terms of safety significance, and alternative approaches for resolving safety significant problems were identified and evaluated.

Human Machine Interfaces for Teleoperators and Virtual Environments Conference

Science.gov (United States)

1990-01-01

In a teleoperator system the human operator senses, moves within, and operates upon a remote or hazardous environment by means of a slave mechanism (a mechanism often referred to as a teleoperator). In a virtual environment system the interactive human machine interface is retained but the slave mechanism and its environment are replaced by a computer simulation. Video is replaced by computer graphics. The auditory and force sensations imparted to the human operator are similarly computer generated. In contrast to a teleoperator system, where the purpose is to extend the operator's sensorimotor system in a manner that facilitates exploration and manipulation of the physical environment, in a virtual environment system, the purpose is to train, inform, alter, or study the human operator to modify the state of the computer and the information environment. A major application in which the human operator is the target is that of flight simulation. Although flight simulators have been around for more than a decade, they had little impact outside aviation presumably because the application was so specialized and so expensive.

An intelligent multi-media human-computer dialogue system

Science.gov (United States)

Neal, J. G.; Bettinger, K. E.; Byoun, J. S.; Dobes, Z.; Thielman, C. Y.

1988-01-01

Sophisticated computer systems are being developed to assist in the human decision-making process for very complex tasks performed under stressful conditions. The human-computer interface is a critical factor in these systems. The human-computer interface should be simple and natural to use, require a minimal learning period, assist the user in accomplishing his task(s) with a minimum of distraction, present output in a form that best conveys information to the user, and reduce cognitive load for the user. In pursuit of this ideal, the Intelligent Multi-Media Interfaces project is devoted to the development of interface technology that integrates speech, natural language text, graphics, and pointing gestures for human-computer dialogues. The objective of the project is to develop interface technology that uses the media/modalities intelligently in a flexible, context-sensitive, and highly integrated manner modelled after the manner in which humans converse in simultaneous coordinated multiple modalities. As part of the project, a knowledge-based interface system, called CUBRICON (CUBRC Intelligent CONversationalist) is being developed as a research prototype. The application domain being used to drive the research is that of military tactical air control.

A Kinect-Based Gesture Recognition Approach for a Natural Human Robot Interface

Directory of Open Access Journals (Sweden)

Grazia Cicirelli

2015-03-01

Full Text Available In this paper, we present a gesture recognition system for the development of a human-robot interaction (HRI interface. Kinect cameras and the OpenNI framework are used to obtain real-time tracking of a human skeleton. Ten different gestures, performed by different persons, are defined. Quaternions of joint angles are first used as robust and significant features. Next, neural network (NN classifiers are trained to recognize the different gestures. This work deals with different challenging tasks, such as the real-time implementation of a gesture recognition system and the temporal resolution of gestures. The HRI interface developed in this work includes three Kinect cameras placed at different locations in an indoor environment and an autonomous mobile robot that can be remotely controlled by one operator standing in front of one of the Kinects. Moreover, the system is supplied with a people re-identification module which guarantees that only one person at a time has control of the robot. The system's performance is first validated offline, and then online experiments are carried out, proving the real-time operation of the system as required by a HRI interface.

Human-Machine Communication

International Nuclear Information System (INIS)

Farbrot, J.E.; Nihlwing, Ch.; Svengren, H.

2005-01-01

New requirements for enhanced safety and design changes in process systems often leads to a step-wise installation of new information and control equipment in the control room of older nuclear power plants, where nowadays modern digital I and C solutions with screen-based human-machine interfaces (HMI) most often are introduced. Human factors (HF) expertise is then required to assist in specifying a unified, integrated HMI, where the entire integration of information is addressed to ensure an optimal and effective interplay between human (operators) and machine (process). Following a controlled design process is the best insurance for ending up with good solutions. This paper addresses the approach taken when introducing modern human-machine communication in the Oskarshamn 1 NPP, the results, and the lessons learned from this work with high operator involvement seen from an HF point of view. Examples of possibilities modern technology might offer for the operators are also addressed. (orig.)

Developing a Prototype ALHAT Human System Interface for Landing

Science.gov (United States)

Hirsh, Robert L.; Chua, Zarrin K.; Heino, Todd A.; Strahan, Al; Major, Laura; Duda, Kevin

2011-01-01

The goal of the Autonomous Landing and Hazard Avoidance Technology (ALHAT) project is to safely execute a precision landing anytime/anywhere on the moon. This means the system must operate in any lighting conditions, operate in the presence of any thruster generated regolith clouds, and operate without the help of redeployed navigational aids or prepared landing site at the landing site. In order to reach this ambitious goal, computer aided technologies such as ALHAT will be needed in order to permit these landings to be done safely. Although there will be advanced autonomous capabilities onboard future landers, humans will still be involved (either onboard as astronauts or remotely from mission control) in any mission to the moon or other planetary body. Because many time critical decisions must be made quickly and effectively during the landing sequence, the Descent and Landing displays need to be designed to be as effective as possible at presenting the pertinent information to the operator, and allow the operators decisions to be implemented as quickly as possible. The ALHAT project has established the Human System Interface (HSI) team to lead in the development of these displays and to study the best way to provide operators enhanced situational awareness during landing activities. These displays are prototypes that were developed based on multiple design and feedback sessions with the astronaut office at NASA/ Johnson Space Center. By working with the astronauts in a series of plan/build/evaluate cycles, the HSI team has obtained astronaut feedback from the very beginning of the design process. In addition to developing prototype displays, the HSI team has also worked to provide realistic lunar terrain (and shading) to simulate a "out the window" view that can be adjusted to various lighting conditions (based on a desired date/time) to allow the same terrain to be viewed under varying lighting terrain. This capability will be critical to determining the

Layout Design of Human-Machine Interaction Interface of Cabin Based on Cognitive Ergonomics and GA-ACA

Directory of Open Access Journals (Sweden)

Li Deng

2016-01-01

Full Text Available In order to consider the psychological cognitive characteristics affecting operating comfort and realize the automatic layout design, cognitive ergonomics and GA-ACA (genetic algorithm and ant colony algorithm were introduced into the layout design of human-machine interaction interface. First, from the perspective of cognitive psychology, according to the information processing process, the cognitive model of human-machine interaction interface was established. Then, the human cognitive characteristics were analyzed, and the layout principles of human-machine interaction interface were summarized as the constraints in layout design. Again, the expression form of fitness function, pheromone, and heuristic information for the layout optimization of cabin was studied. The layout design model of human-machine interaction interface was established based on GA-ACA. At last, a layout design system was developed based on this model. For validation, the human-machine interaction interface layout design of drilling rig control room was taken as an example, and the optimization result showed the feasibility and effectiveness of the proposed method.

Layout Design of Human-Machine Interaction Interface of Cabin Based on Cognitive Ergonomics and GA-ACA.

Science.gov (United States)

Deng, Li; Wang, Guohua; Yu, Suihuai

2016-01-01

In order to consider the psychological cognitive characteristics affecting operating comfort and realize the automatic layout design, cognitive ergonomics and GA-ACA (genetic algorithm and ant colony algorithm) were introduced into the layout design of human-machine interaction interface. First, from the perspective of cognitive psychology, according to the information processing process, the cognitive model of human-machine interaction interface was established. Then, the human cognitive characteristics were analyzed, and the layout principles of human-machine interaction interface were summarized as the constraints in layout design. Again, the expression form of fitness function, pheromone, and heuristic information for the layout optimization of cabin was studied. The layout design model of human-machine interaction interface was established based on GA-ACA. At last, a layout design system was developed based on this model. For validation, the human-machine interaction interface layout design of drilling rig control room was taken as an example, and the optimization result showed the feasibility and effectiveness of the proposed method.

Task planning systems with natural language interface

International Nuclear Information System (INIS)

Kambayashi, Shaw; Uenaka, Junji

1989-12-01

In this report, a natural language analyzer and two different task planning systems are described. In 1988, we have introduced a Japanese language analyzer named CS-PARSER for the input interface of the task planning system in the Human Acts Simulation Program (HASP). For the purpose of a high speed analysis, we have modified a dictionary system of the CS-PARSER by using C language description. It is found that the new dictionary system is very useful for a high speed analysis and an efficient maintenance of the dictionary. For the study of the task planning problem, we have modified a story generating system named Micro TALE-SPIN to generate a story written in Japanese sentences. We have also constructed a planning system with natural language interface by using the CS-PARSER. Task planning processes and related knowledge bases of these systems are explained. A concept design for a new task planning system will be also discussed from evaluations of above mentioned systems. (author)

Attempt on construction of human friendly man-machine interface. Study and apply about human communication; Human friendly na man machine interface kochiku no kokoromi. Ningen no communication no kento to sono oyo

Energy Technology Data Exchange (ETDEWEB)

Tatsuno, J. [Tokyo University of Agriculture, Tokyo (Japan); Kokubo, Y.; Matsumura, I.; Kobayashi, H. [Hosei University, Tokyo (Japan)

1998-04-01

This paper describes an attempt on a construction way of human friendly man-machine interface. At first, we do a simple experiment to find out the characteristic of human verbal communication. From the experimental results, we get some rules in case in human verbal communication. We construct the man-machine interface which is based on these rules. Through teaching process, we examine our verbal communication interface comparing with conventional interfaces. From this comparison, we recognize that the verbal communication interface is valid to construct the user-friendly man-machine interface. 12 refs., 9 figs., 2 tabs.

The Control Room Upgrade in Oskarshamn 2 Modernization Project Lesson Learned from Ongoing Human Factor design

International Nuclear Information System (INIS)

Thomas, Gunnarsson; Magnus, Eliasson

2011-01-01

Due to recent changes in Swedish commercial nuclear safety system requirements, OKG decided to make the changes required by the new safety requirements, apply for a 30-year license extension, and to concurrently make changes for a major power uprate; this project is called the Plant Life Extension project (PLEX). It was decided, in addition to several plant modifications, to re build the old control room to a new modern screen-based control room located in the same space as the old one, and with the same number of operators. This paper explains the approach taken when modernizing the control room as a part of the Oskarshamn 2 Modernization project PLEX, the results, and the lessons learned from this ongoing work. The combination of changes results in a modernization project that is expected to increase output power by approximately 50 MWe through increased efficiency and to result in an increase in thermal power from 1800 MWt to 2300 MWt (28%) and electrical power from 620 MWe to 840 MWe due to the power uprate. The license to operate OKG2 expires in 2012 The PLEX project is one of the most ambitious nuclear power plant modernization projects ever implemented, world-wide. The application of human factors engineering (HFE) and control room and HSI design is a complex challenge. The original main control room from 1975 in Oskarshamn 2, was quite compact and provided a fairly good overview of the process. New requirements for enhanced safety and other design changes in the process systems and instrumentation led to a step-wise installation of new information and control equipment in the control room. Since the control room was quite limited in space, the control room grew larger, and the new equipment was installed farther away from the operator workplaces into an adjacent control room. This was even the case for the new safety systems. These systems were functioning well separately as such, but in some cases their interfaces were inconsistent, leading to increased

From Neandertals to modern humans: New data on the Uluzzian.

Science.gov (United States)

Villa, Paola; Pollarolo, Luca; Conforti, Jacopo; Marra, Fabrizio; Biagioni, Cristian; Degano, Ilaria; Lucejko, Jeannette J; Tozzi, Carlo; Pennacchioni, Massimo; Zanchetta, Giovanni; Nicosia, Cristiano; Martini, Marco; Sibilia, Emanuela; Panzeri, Laura

2018-01-01

Having thrived in Eurasia for 350,000 years Neandertals disappeared from the record around 40,000-37,000 years ago, after modern humans entered Europe. It was a complex process of population interactions that included cultural exchanges and admixture between Neandertals and dispersing groups of modern humans. In Europe Neandertals are always associated with the Mousterian while the Aurignacian is associated with modern humans only. The onset of the Aurignacian is preceded by "transitional" industries which show some similarities with the Mousterian but also contain modern tool forms. Information on these industries is often incomplete or disputed and this is true of the Uluzzian. We present the results of taphonomic, typological and technological analyses of two Uluzzian sites, Grotta La Fabbrica (Tuscany) and the newly discovered site of Colle Rotondo (Latium). Comparisons with Castelcivita and Grotta del Cavallo show that the Uluzzian is a coherent cultural unit lasting about five millennia, replaced by the Protoaurignacian before the eruption of the Campanian Ignimbrite. The lack of skeletal remains at our two sites and the controversy surrounding the stratigraphic position of modern human teeth at Cavallo makes it difficult to reach agreement about authorship of the Uluzzian, for which alternative hypotheses have been proposed. Pending the discovery of DNA or further human remains, these hypotheses can only be evaluated by archaeological arguments, i.e. evidence of continuities and discontinuities between the Uluzzian and the preceding and succeeding culture units in Italy. However, in the context of "transitional" industries with disputed dates for the arrival of modern humans in Europe, and considering the case of the Châtelperronian, an Upper Paleolithic industry made by Neandertals, typo-technology used as an indicator of hominin authorship has limited predictive value. We corroborate previous suggestions that the Middle-to-Upper Paleolithic transition

Graphical User Interface Programming in Introductory Computer Science.

Science.gov (United States)

Skolnick, Michael M.; Spooner, David L.

Modern computing systems exploit graphical user interfaces for interaction with users; as a result, introductory computer science courses must begin to teach the principles underlying such interfaces. This paper presents an approach to graphical user interface (GUI) implementation that is simple enough for beginning students to understand, yet…

Early Modern Philosophical Systems

NARCIS (Netherlands)

L. van Bunge (Wiep)

2014-01-01

textabstractThe occurrence of an entry on early modern philosophical systems in an encyclopaedia of Neo-Latin studies is fraught with complications, if only on account of the gradual disappearance during the early modern period of Latin as the main vehicle of philosophical communication. What

Earliest evidence of modern human life history in North African early Homo sapiens.

Science.gov (United States)

Smith, Tanya M; Tafforeau, Paul; Reid, Donald J; Grün, Rainer; Eggins, Stephen; Boutakiout, Mohamed; Hublin, Jean-Jacques

2007-04-10

Recent developmental studies demonstrate that early fossil hominins possessed shorter growth periods than living humans, implying disparate life histories. Analyses of incremental features in teeth provide an accurate means of assessing the age at death of developing dentitions, facilitating direct comparisons with fossil and modern humans. It is currently unknown when and where the prolonged modern human developmental condition originated. Here, an application of x-ray synchrotron microtomography reveals that an early Homo sapiens juvenile from Morocco dated at 160,000 years before present displays an equivalent degree of tooth development to modern European children at the same age. Crown formation times in the juvenile's macrodont dentition are higher than modern human mean values, whereas root development is accelerated relative to modern humans but is less than living apes and some fossil hominins. The juvenile from Jebel Irhoud is currently the oldest-known member of Homo with a developmental pattern (degree of eruption, developmental stage, and crown formation time) that is more similar to modern H. sapiens than to earlier members of Homo. This study also underscores the continuing importance of North Africa for understanding the origins of human anatomical and behavioral modernity. Corresponding biological and cultural changes may have appeared relatively late in the course of human evolution.

Implementation of a Shoe-Embedded Human Interface and Collaborative Supplementation of Service Requirements on Smartphone System

Directory of Open Access Journals (Sweden)

Kaname Takaochi

2013-01-01

Full Text Available Although a handsfree man-machine interface is useful when the user’s hands are not free, existing handsfree input devices are not the type of device that are normally worn by people. We have focused on a shoe as an input device because people normally wear it when they go out, and proposed a shoe-embedded interface. The input device is a sensor shoe. Weight sensors have been attached at three positions on a sole: the first metatarsal, the fifth metatarsal, and the calcaneal tuberosity. These positions have been selected based on the characteristics of the human foot skeleton. Two types of foot operation have been used: tap and push. By combining these operations, 10 commands have been defined. To make it possible to use web applications with a limited number of commands, we have proposed a method of supplementing the user’s service requirements using collaborative filtering. The sensor shoe houses an insole with hetero-core optical fiber sensor elements attached to it. These elements are sensitive to weight. We have built an experimental system that runs on a smartphone and provides the shoe-embedded interface, and conducted experiments with three test subjects to evaluate the system. The average rate of successful command identification was 89 %. We have also evaluated this service requirements supplementation method theoretically, and confirmed that the proposed service recommendation function can be applied to smartphone systems.

Modern operating systems

CERN Document Server

Tanenbaum, Andrew S

2015-01-01

Modern Operating Systems, Fourth Edition, is intended for introductory courses in Operating Systems in Computer Science, Computer Engineering, and Electrical Engineering programs. It also serves as a useful reference for OS professionals ' The widely anticipated revision of this worldwide best-seller incorporates the latest developments in operating systems (OS) technologies. The Fourth Edition includes up-to-date materials on relevant'OS. Tanenbaum also provides information on current research based on his experience as an operating systems researcher. ' Modern Operating Systems, Third Editionwas the recipient of the 2010 McGuffey Longevity Award. The McGuffey Longevity Award recognizes textbooks whose excellence has been demonstrated over time.'http://taaonline.net/index.html " Teaching and Learning Experience This program will provide a better teaching and learning experience-for you and your students. It will help: ' *Provide Practical Detail on the Big Picture Concepts: A clear and entertaining writing s...

Human machine interface based on labview for vacuum system operation of cyclotron proton DECY-13 MeV

International Nuclear Information System (INIS)

Fajar Sidik Permana; Saminto; Kurnia Wibowo; Vika Arwida Fanita Sari

2016-01-01

Center of Accelerator Science and Technology (CAST), BATAN is designing DECY-13 MeV Proton Cyclotron. So far, this operation system has been conducted conventionally. In this research, an Human Machine Interface system has been successfully built for simplifying operation and monitoring pressure inside vacuum chamber of cyclotron DECY-13 MeV. HMI system is built with LabVIEW software and integrated with Programmable Logic Controller FX-2424 series and NI cRIO (NI-9025 and NI-9870) module. HMI system consist of turning on/of pumps (rotary and diffusion), opening/ closing valve automatically, and retrieving of data from sensor in real time. (author)

THE DEVELOPMENT OF DETAILED HUMAN FACTORS ENGINEERING GUIDELINES FOR DIGITAL CONTROL ROOM UPGRADES

International Nuclear Information System (INIS)

BROWN, W.; O'HARA, J.M.

2004-01-01

As part of the Department of Energy and Electric Power Research Institute's hybrid control room project, detailed human factors engineering guidance was developed for designing human-system interfaces that may be affected by introduction of additional digital technology during modernization of nuclear power plants. The guidance addresses several aspects of human-system interaction: information display, interface management, soft controls, alarms, computer-based procedures, computerized operator support systems, communications, and workstation/workplace design. In this paper, the ways in which digital upgrades might affect users' interaction with systems in each of these contexts are briefly described, and the contents of the guidance developed for each of the topics is also described

Pattern formation at interfaces

CERN Document Server

Maier, Giulio; Nepomnyashchy, Alexander

2010-01-01

Applying modern nonlinear stability theory to problems of continuous media mechanics in the presence of interfaces, this text is relevant to materials science, chemical engineering, and heat transfer technologies, as well as to reaction-diffusion systems.

Human-Machine interface for off normal and emergency situations in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Kwon, Kee Choon [Korea Atomic Energy Research Institute, Taejeon (Korea)

2000-01-01

Many nuclear power plants (NPPs) have reported that a high percentage of all major failures in the plants are caused by human errors. Therefore, there has been much focus on elimination of human errors, enhancement of human performance, and general improvement of human machine interface (HMI). Both the utility management and the regulators are demanding improvement in this area. The International Atomic Energy Agency (IAEA) Specialists' Meeting on 'Human-Machine Interface for Off Normal and Emergency Situations in Nuclear Power Plants' was co-organized by the Korea Atomic Energy Research Institute (KAERI) and the Korea Power Engineering Company, INC (KOPEC), and took place in Taejeon, Republic of Korea, 1999 October 26-28. Fifty eight participants, representing nine member countries reviewed recent developments and discussed directions for future efforts in the Human-Machine Interface for Off Normal and Emergency Situations in NPPs. Twenty papers were presented, covering a wide spectrum of technical and scientific subjects including recent experience and benefits from Operational Experience with HMI, Development of HMI System, Licensing Issues for HMI and Future Development and Trends. (Author)

Human-Machine interface for off normal and emergency situations in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Kwon, Kee Choon [Korea Atomic Energy Research Institute, Taejeon (Korea)

2000-01-01

Many nuclear power plants (NPPs) have reported that a high percentage of all major failures in the plants are caused by human errors. Therefore, there has been much focus on elimination of human errors, enhancement of human performance, and general improvement of human machine interface (HMI). Both the utility management and the regulators are demanding improvement in this area. The International Atomic Energy Agency (IAEA) Specialists' Meeting on 'Human-Machine Interface for Off Normal and Emergency Situations in Nuclear Power Plants' was co-organized by the Korea Atomic Energy Research Institute (KAERI) and the Korea Power Engineering Company, INC (KOPEC), and took place in Taejeon, Republic of Korea, 1999 October 26-28. Fifty eight participants, representing nine member countries reviewed recent developments and discussed directions for future efforts in the Human-Machine Interface for Off Normal and Emergency Situations in NPPs. Twenty papers were presented, covering a wide spectrum of technical and scientific subjects including recent experience and benefits from Operational Experience with HMI, Development of HMI System, Licensing Issues for HMI and Future Development and Trends. (Author)

The earliest modern humans outside Africa.

Science.gov (United States)

Hershkovitz, Israel; Weber, Gerhard W; Quam, Rolf; Duval, Mathieu; Grün, Rainer; Kinsley, Leslie; Ayalon, Avner; Bar-Matthews, Miryam; Valladas, Helene; Mercier, Norbert; Arsuaga, Juan Luis; Martinón-Torres, María; Bermúdez de Castro, José María; Fornai, Cinzia; Martín-Francés, Laura; Sarig, Rachel; May, Hila; Krenn, Viktoria A; Slon, Viviane; Rodríguez, Laura; García, Rebeca; Lorenzo, Carlos; Carretero, Jose Miguel; Frumkin, Amos; Shahack-Gross, Ruth; Bar-Yosef Mayer, Daniella E; Cui, Yaming; Wu, Xinzhi; Peled, Natan; Groman-Yaroslavski, Iris; Weissbrod, Lior; Yeshurun, Reuven; Tsatskin, Alexander; Zaidner, Yossi; Weinstein-Evron, Mina

2018-01-26

To date, the earliest modern human fossils found outside of Africa are dated to around 90,000 to 120,000 years ago at the Levantine sites of Skhul and Qafzeh. A maxilla and associated dentition recently discovered at Misliya Cave, Israel, was dated to 177,000 to 194,000 years ago, suggesting that members of the Homo sapiens clade left Africa earlier than previously thought. This finding changes our view on modern human dispersal and is consistent with recent genetic studies, which have posited the possibility of an earlier dispersal of Homo sapiens around 220,000 years ago. The Misliya maxilla is associated with full-fledged Levallois technology in the Levant, suggesting that the emergence of this technology is linked to the appearance of Homo sapiens in the region, as has been documented in Africa. Copyright © 2018, The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

Human-Vehicle Interface for Semi-Autonomous Operation of Uninhabited Aero Vehicles

Science.gov (United States)

Jones, Henry L.; Frew, Eric W.; Woodley, Bruce R.; Rock, Stephen M.

2001-01-01

The robustness of autonomous robotic systems to unanticipated circumstances is typically insufficient for use in the field. The many skills of human user often fill this gap in robotic capability. To incorporate the human into the system, a useful interaction between man and machine must exist. This interaction should enable useful communication to be exchanged in a natural way between human and robot on a variety of levels. This report describes the current human-robot interaction for the Stanford HUMMINGBIRD autonomous helicopter. In particular, the report discusses the elements of the system that enable multiple levels of communication. An intelligent system agent manages the different inputs given to the helicopter. An advanced user interface gives the user and helicopter a method for exchanging useful information. Using this human-robot interaction, the HUMMINGBIRD has carried out various autonomous search, tracking, and retrieval missions.

From Neandertals to modern humans: New data on the Uluzzian.

Directory of Open Access Journals (Sweden)

Paola Villa

Full Text Available Having thrived in Eurasia for 350,000 years Neandertals disappeared from the record around 40,000-37,000 years ago, after modern humans entered Europe. It was a complex process of population interactions that included cultural exchanges and admixture between Neandertals and dispersing groups of modern humans. In Europe Neandertals are always associated with the Mousterian while the Aurignacian is associated with modern humans only. The onset of the Aurignacian is preceded by "transitional" industries which show some similarities with the Mousterian but also contain modern tool forms. Information on these industries is often incomplete or disputed and this is true of the Uluzzian. We present the results of taphonomic, typological and technological analyses of two Uluzzian sites, Grotta La Fabbrica (Tuscany and the newly discovered site of Colle Rotondo (Latium. Comparisons with Castelcivita and Grotta del Cavallo show that the Uluzzian is a coherent cultural unit lasting about five millennia, replaced by the Protoaurignacian before the eruption of the Campanian Ignimbrite. The lack of skeletal remains at our two sites and the controversy surrounding the stratigraphic position of modern human teeth at Cavallo makes it difficult to reach agreement about authorship of the Uluzzian, for which alternative hypotheses have been proposed. Pending the discovery of DNA or further human remains, these hypotheses can only be evaluated by archaeological arguments, i.e. evidence of continuities and discontinuities between the Uluzzian and the preceding and succeeding culture units in Italy. However, in the context of "transitional" industries with disputed dates for the arrival of modern humans in Europe, and considering the case of the Châtelperronian, an Upper Paleolithic industry made by Neandertals, typo-technology used as an indicator of hominin authorship has limited predictive value. We corroborate previous suggestions that the Middle

A New Human-Machine Interfaces of Computer-based Procedure System to Reduce the Team Errors in Nuclear Power Plants

International Nuclear Information System (INIS)

Kim, Sa Kil; Sim, Joo Hyun; Lee, Hyun Chul

2016-01-01

In this study, we identify the emerging types of team errors, especially, in digitalized control room of nuclear power plants such as the APR-1400 main control room of Korea. Most works in nuclear industry are to be performed by a team of more than two persons. Even though the individual errors can be detected and recovered by the qualified others and/or the well trained team, it is rather seldom that the errors by team could be easily detected and properly recovered by the team itself. Note that the team is defined as two or more people who are appropriately interacting with each other, and the team is a dependent aggregate, which accomplishes a valuable goal. Organizational errors sometimes increase the likelihood of operator errors through the active failure pathway and, at the same time, enhance the possibility of adverse outcomes through defensive weaknesses. We incorporate the crew resource management as a representative approach to deal with the team factors of the human errors. We suggest a set of crew resource management training procedures under the unsafe environments where human errors can have devastating effects. We are on the way to develop alternative interfaces against team error in a condition of using a computer-based procedure system in a digitalized main control room. The computer-based procedure system is a representative feature of digitalized control room. In this study, we will propose new interfaces of computer-based procedure system to reduce feasible team errors. We are on the way of effectiveness test to validate whether the new interface can reduce team errors during operating with a computer-based procedure system in a digitalized control room

A New Human-Machine Interfaces of Computer-based Procedure System to Reduce the Team Errors in Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Kim, Sa Kil; Sim, Joo Hyun; Lee, Hyun Chul [Korea Atomic Research Institute, Daejeon (Korea, Republic of)

2016-10-15

In this study, we identify the emerging types of team errors, especially, in digitalized control room of nuclear power plants such as the APR-1400 main control room of Korea. Most works in nuclear industry are to be performed by a team of more than two persons. Even though the individual errors can be detected and recovered by the qualified others and/or the well trained team, it is rather seldom that the errors by team could be easily detected and properly recovered by the team itself. Note that the team is defined as two or more people who are appropriately interacting with each other, and the team is a dependent aggregate, which accomplishes a valuable goal. Organizational errors sometimes increase the likelihood of operator errors through the active failure pathway and, at the same time, enhance the possibility of adverse outcomes through defensive weaknesses. We incorporate the crew resource management as a representative approach to deal with the team factors of the human errors. We suggest a set of crew resource management training procedures under the unsafe environments where human errors can have devastating effects. We are on the way to develop alternative interfaces against team error in a condition of using a computer-based procedure system in a digitalized main control room. The computer-based procedure system is a representative feature of digitalized control room. In this study, we will propose new interfaces of computer-based procedure system to reduce feasible team errors. We are on the way of effectiveness test to validate whether the new interface can reduce team errors during operating with a computer-based procedure system in a digitalized control room.

Through the Interface - a human activity approach to user interfaces

DEFF Research Database (Denmark)

Bødker, Susanne

In providing a theoretical framework for understanding human- computer interaction as well as design of user interfaces, this book combines elements of anthropology, psychology, cognitive science, software engineering, and computer science. The framework examines the everyday work practices of us...

An Approach to Establish Design Requirements for Human-System Interface (HSI) of Automatic Systems in Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Nuraslinda, Anuar; Kim, Jonghyun [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2013-05-15

This paper aims to demonstrate an approach to establish the design requirements for automatic systems in nuclear power plant (NPP) by using a powerful tool called Itemized Sequence Diagram (ISD). The process starts with function allocation by defining a set of levels of automation (LOAs). Then, task allocation is done using the ISD and finally the design requirements are established by examining the interaction points between human operator and automation, which are all located on the interface as modeled in the ISD. The strengths of this approach are discussed and a suggestion to integrate with that of the methodology employed to produce the existing guidelines or guidance is included in this paper. Some issues of automation have been addressed earlier in this paper and 12 design requirements that address human-system interaction were suggested by using the ISD as a tool to identify the interaction points between human operator and automation. The integration of the proposed approach in this paper with that of existing guidance could result in the new issue identification that would call for the establishment of new guidance. For example, Requirement 11 states that the HSI should provide the means for take-over from automatic to manual control was not mentioned in the existing guidance.

Advanced human-system interface design review guideline. General evaluation model, technical development, and guideline description

International Nuclear Information System (INIS)

O'Hara, J.M.

1994-07-01

Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use

Advanced human-system interface design review guideline. General evaluation model, technical development, and guideline description

Energy Technology Data Exchange (ETDEWEB)

O`Hara, J.M.

1994-07-01

Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator`s overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use.

Human-machine interface (HMI) report for 241-SY-101 data acquisition [and control] system (DACS) upgrade study

Energy Technology Data Exchange (ETDEWEB)

Truitt, R.W.

1997-10-22

This report provides an independent evaluation of information for a Windows based Human Machine Interface (HMI) to replace the existing DOS based Iconics HMI currently used in the Data Acquisition and Control System (DACS) used at Tank 241-SY-101. A fundamental reason for this evaluation is because of the difficulty of maintaining the system with obsolete, unsupported software. The DACS uses a software operator interface (Genesis for DOS HMI) that is no longer supported by its manufacturer, Iconics. In addition to its obsolescence, it is complex and difficult to train additional personnel on. The FY 1997 budget allocated $40K for phase 1 of a software/hardware upgrade that would have allowed the old DOS based system to be replaced by a current Windows based system. Unfortunately, budget constraints during FY 1997 has prompted deferral of the upgrade. The upgrade needs to be performed at the earliest possible time, before other failures render the system useless. Once completed, the upgrade could alleviate other concerns: spare pump software may be able to be incorporated into the same software as the existing pump, thereby eliminating the parallel path dilemma; and the newer, less complex software should expedite training of future personnel, and in the process, require that less technical time be required to maintain the system.

On the origin of modern humans: Asian perspectives.

Science.gov (United States)

Bae, Christopher J; Douka, Katerina; Petraglia, Michael D

2017-12-08

The traditional "out of Africa" model, which posits a dispersal of modern Homo sapiens across Eurasia as a single wave at ~60,000 years ago and the subsequent replacement of all indigenous populations, is in need of revision. Recent discoveries from archaeology, hominin paleontology, geochronology, genetics, and paleoenvironmental studies have contributed to a better understanding of the Late Pleistocene record in Asia. Important findings highlighted here include growing evidence for multiple dispersals predating 60,000 years ago in regions such as southern and eastern Asia. Modern humans moving into Asia met Neandertals, Denisovans, mid-Pleistocene Homo , and possibly H. floresiensis , with some degree of interbreeding occurring. These early human dispersals, which left at least some genetic traces in modern populations, indicate that later replacements were not wholesale. Copyright © 2017 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

Early modern human diversity suggests subdivided population structure and a complex out-of-Africa scenario

Science.gov (United States)

Gunz, Philipp; Bookstein, Fred L.; Mitteroecker, Philipp; Stadlmayr, Andrea; Seidler, Horst; Weber, Gerhard W.

2009-01-01

The interpretation of genetic evidence regarding modern human origins depends, among other things, on assessments of the structure and the variation of ancient populations. Because we lack genetic data from the time when the first anatomically modern humans appeared, between 200,000 and 60,000 years ago, instead we exploit the phenotype of neurocranial geometry to compare the variation in early modern human fossils with that in other groups of fossil Homo and recent modern humans. Variation is assessed as the mean-squared Procrustes distance from the group average shape in a representation based on several hundred neurocranial landmarks and semilandmarks. We find that the early modern group has more shape variation than any other group in our sample, which covers 1.8 million years, and that they are morphologically similar to recent modern humans of diverse geographically dispersed populations but not to archaic groups. Of the currently competing models of modern human origins, some are inconsistent with these findings. Rather than a single out-of-Africa dispersal scenario, we suggest that early modern humans were already divided into different populations in Pleistocene Africa, after which there followed a complex migration pattern. Our conclusions bear implications for the inference of ancient human demography from genetic models and emphasize the importance of focusing research on those early modern humans, in particular, in Africa. PMID:19307568

A functional test of Neandertal and modern human mitochondrial targeting sequences

International Nuclear Information System (INIS)

Gralle, Matthias; Schaefer, Ingo; Seibel, Peter; Paeaebo, Svante

2010-01-01

Research highlights: → Two mutations in mitochondrial targeting peptides occurred during human evolution, possibly after Neandertals split off from modern human lineage. → The ancestral and modern human versions of these two targeting peptides were tested functionally for their effects on localization and cleavage rate. → In spite of recent evolution, and to the contrary of other mutations in targeting peptides, these mutations had no visible effects. -- Abstract: Targeting of nuclear-encoded proteins to different organelles, such as mitochondria, is a process that can result in the redeployment of proteins to new intracellular destinations during evolution. With the sequencing of the Neandertal genome, it has become possible to identify amino acid substitutions that occurred on the modern human lineage since its separation from the Neandertal lineage. Here we analyze the function of two substitutions in mitochondrial targeting sequences that occurred and rose to high frequency recently during recent human evolution. The ancestral and modern versions of the two targeting sequences do not differ in the efficiency with which they direct a protein to the mitochondria, an observation compatible with the neutral theory of molecular evolution.

A functional test of Neandertal and modern human mitochondrial targeting sequences

Energy Technology Data Exchange (ETDEWEB)

Gralle, Matthias, E-mail: gralle@bioqmed.ufrj.br [Instituto de Bioquimica Medica, Universidade Federal do Rio de Janeiro, CCS, Ilha do Fundao, 21941-590 Rio de Janeiro (Brazil); Department of Evolutionary Genetics, Max Planck Institute for Evolutionary Anthropology, Deutscher Platz 6, 04103 Leipzig (Germany); Schaefer, Ingo; Seibel, Peter [Department of Molecular Cell Therapy, Leipzig University, Deutscher Platz 5, 04103 Leipzig (Germany); Paeaebo, Svante [Department of Evolutionary Genetics, Max Planck Institute for Evolutionary Anthropology, Deutscher Platz 6, 04103 Leipzig (Germany)

2010-11-26

Research highlights: {yields} Two mutations in mitochondrial targeting peptides occurred during human evolution, possibly after Neandertals split off from modern human lineage. {yields} The ancestral and modern human versions of these two targeting peptides were tested functionally for their effects on localization and cleavage rate. {yields} In spite of recent evolution, and to the contrary of other mutations in targeting peptides, these mutations had no visible effects. -- Abstract: Targeting of nuclear-encoded proteins to different organelles, such as mitochondria, is a process that can result in the redeployment of proteins to new intracellular destinations during evolution. With the sequencing of the Neandertal genome, it has become possible to identify amino acid substitutions that occurred on the modern human lineage since its separation from the Neandertal lineage. Here we analyze the function of two substitutions in mitochondrial targeting sequences that occurred and rose to high frequency recently during recent human evolution. The ancestral and modern versions of the two targeting sequences do not differ in the efficiency with which they direct a protein to the mitochondria, an observation compatible with the neutral theory of molecular evolution.

Comparative usability of modern anaesthesia ventilators: a human factors study.

Science.gov (United States)

Spaeth, J; Schweizer, T; Schmutz, A; Buerkle, H; Schumann, S

2017-11-01

The anaesthesia ventilator represents the key equipment for intraoperative respiratory care. Improper operation of this device may threaten a patient's health. A self-explanatory interface facilitates handling and decreases the risk of operating errors. This study systematically evaluates the usability of user interfaces in four modern anaesthesia ventilators. Twenty naïve operators were asked to execute 20 tasks on each of four different anaesthesia ventilators (Avance CS2™, GE Healthcare; Flow-i™, Maquet; and Perseus™ and Primus™, Dräger) in a randomized order. The success of task execution, frequency of requests for assistance, and processing times were recorded. During the tasks, the operators' visual focus was measured via eye-tracking. Additionally, subjective assessments of usability were evaluated by a standardized questionnaire. For comparison, six experienced operators undertook the same protocol. The overall rate of falsely executed tasks was low. Naïve operators requested assistance least when using the Perseus (26). Pooled processing times were shortest for the Perseus (222 s), followed by the Primus (223 s), the Avance (238 s), and the Flow-i (353 s). Task-specific processing times differed considerably between the devices. Eye-tracking analyses revealed associated interface issues that impeded the operators' performance. Operators rated usability best for the Perseus [mean (sd): 67 (17) arbitrary units] and worst for the Flow-i [50 (16) arbitrary units]. Results from experienced operators support these findings by trend. The usability of modern anaesthesia ventilators differs considerably. Interface issues of specific tasks impair the operator's efficiency. Eliminating the specific usability issues might improve the operator's performance and, as a consequence, the patient's safety. © The Author 2017. Published by Oxford University Press on behalf of the British Journal of Anaesthesia. All rights reserved. For Permissions, please

State transition storyboards: A tool for designing the Goldstone solar system radar data acquisition system user interface software

Science.gov (United States)

Howard, S. D.

1987-01-01

Effective user interface design in software systems is a complex task that takes place without adequate modeling tools. By combining state transition diagrams and the storyboard technique of filmmakers, State Transition Storyboards were developed to provide a detailed modeling technique for the Goldstone Solar System Radar Data Acquisition System human-machine interface. Illustrations are included with a description of the modeling technique.

Integrated design of intelligent surveillance systems and their user interface

NARCIS (Netherlands)

Toet, A.

2005-01-01

Modern complex surveillance systems consisting of multiple and heterogeneous sensors, automatic information registration and data analysis techniques, and decision support tools should provide the human operator an integrated, transparent and easily comprehensible view of the surveyed scene.

UNIVERSAL INTERFACE TO MULTIPLE OPERATIONS SYSTEMS

DEFF Research Database (Denmark)

Sonnenwald, Diane H.

1986-01-01

Alternative ways to provide access to operations systems that maintain, test, and configure complex telephone networks are being explored. It is suggested that a universal interface that provides simultaneous access to multiple operations systems that execute in different hardware and software...... environments, can be provided by an architecture that is based on the separation of presentation issues from application issues and on a modular interface management system that consists of a virtual user interface, physical user interface, and interface agent. The interface functionality that is needed...

The graphics-based human interface to the DISYS diagnostic/control guidance system at EBR-2

International Nuclear Information System (INIS)

Edwards, R.M.; Chavez, C.; Kamarthi, S.; Dharap, S.; Lindsay, R.W.; Staffon, J.

1990-01-01

An initial graphics based interface to the real-time DISYS diagnostic system has been developed using the multi-tasking capabilities of the UNIX operating system and X-Windows 11 Xlib graphics library. This system is interfaced to live plant data at the Experimental Breeder Reactor (EBR-2) for the Argon Cooling System of fuel handling operations and the steam plant. The interface includes an intelligent process schematic which highlights problematic components and sensors based on the results of the diagnostic computations. If further explanation of a faulted component is required, the user can call up a display of the diagnostic computations presented in a tree-like diagram. Numerical data on the process schematic and optional diagnostic tree are updated as new real-time data becomes available. The initial X-Windows 11 based interface will be further enhanced using VI Corporation DATAVIEWS graphical data base software. 5 refs., 6 figs

Human-machine Interface for Presentation Robot

Czech Academy of Sciences Publication Activity Database

Krejsa, Jiří; Ondroušek, V.

2012-01-01

Roč. 6, č. 2 (2012), s. 17-21 ISSN 1897-8649 Institutional research plan: CEZ:AV0Z20760514 Keywords : human-robot interface * mobile robot * presentation robot Subject RIV: JD - Computer Applications, Robotics

The use of graphics in the design of the human-telerobot interface

Science.gov (United States)

Stuart, Mark A.; Smith, Randy L.

1989-01-01

The Man-Systems Telerobotics Laboratory (MSTL) of NASA's Johnson Space Center employs computer graphics tools in their design and evaluation of the Flight Telerobotic Servicer (FTS) human/telerobot interface on the Shuttle and on the Space Station. It has been determined by the MSTL that the use of computer graphics can promote more expedient and less costly design endeavors. Several specific examples of computer graphics applied to the FTS user interface by the MSTL are described.

The importance of simulation facilities for the development of review criteria for advanced human system interfaces

International Nuclear Information System (INIS)

O'Hara, J.M.; Wachtel, J.

1994-01-01

Advanced control room (ACR) concepts are being developed in the commercial nuclear industry as part of future reactor designs. The ACRs will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role (function) in the system, the method of information presentation, the ways in which the operator interacts with the system, and the requirements on the operator to understand and supervise an increasingly complex system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The NRC is developing guidelines to support their review of these advanced designs. As part of this effort, a methodology for guidance development was established, and topics in need of further research were identified. Simulators of various kinds are likely to play important roles in the development of review guidelines and in the evaluation of ACRs. This paper describes a general approach to review criteria development, and discusses the role of simulators in addressing research needs

Methodology for advanced control rooms assessment of nuclear reactors: case study using Laboratory of Human System Interface (LABIHS)

International Nuclear Information System (INIS)

Carvalho, Eduardo Ferro; Verboonen, Monique; Carvalho, Bruno Batista de

2005-01-01

A control room of a nuclear reactor is a complex system that controls a thermodynamic process used to produce electric energy. The operators interact with the control room through interfaces and several monitoring stations. These interfaces present significant implications for the safety of the nuclear power plant, once they influence the activities of the operators, affect the way how operators receive information related with the status from the main systems and determine the necessary requirements so that the operators understand and supervise the main parameters. This article intends to present the methodology and the results of the evaluation carried through in the advanced control room of a compact simulator, that uses as reference a nuclear plant PWR of the Westinghouse. The structure used for evaluation of the simulator is formed by the guideline of human factors of the NRC, the NUREG 700, checklist, questionnaires and the analysis of the operator's activity. (author)

Intelligent Systems and Advanced User Interfaces for Design, Operation, and Maintenance of Command Management Systems

Science.gov (United States)

Mitchell, Christine M.

1998-01-01

Historically Command Management Systems (CMS) have been large, expensive, spacecraft-specific software systems that were costly to build, operate, and maintain. Current and emerging hardware, software, and user interface technologies may offer an opportunity to facilitate the initial formulation and design of a spacecraft-specific CMS as well as a to develop a more generic or a set of core components for CMS systems. Current MOC (mission operations center) hardware and software include Unix workstations, the C/C++ and Java programming languages, and X and Java window interfaces representations. This configuration provides the power and flexibility to support sophisticated systems and intelligent user interfaces that exploit state-of-the-art technologies in human-machine systems engineering, decision making, artificial intelligence, and software engineering. One of the goals of this research is to explore the extent to which technologies developed in the research laboratory can be productively applied in a complex system such as spacecraft command management. Initial examination of some of the issues in CMS design and operation suggests that application of technologies such as intelligent planning, case-based reasoning, design and analysis tools from a human-machine systems engineering point of view (e.g., operator and designer models) and human-computer interaction tools, (e.g., graphics, visualization, and animation), may provide significant savings in the design, operation, and maintenance of a spacecraft-specific CMS as well as continuity for CMS design and development across spacecraft with varying needs. The savings in this case is in software reuse at all stages of the software engineering process.

All printed touchless human-machine interface based on only five functional materials

Science.gov (United States)

Scheipl, G.; Zirkl, M.; Sawatdee, A.; Helbig, U.; Krause, M.; Kraker, E.; Andersson Ersman, P.; Nilsson, D.; Platt, D.; Bodö, P.; Bauer, S.; Domann, G.; Mogessie, A.; Hartmann, Paul; Stadlober, B.

2012-02-01

We demonstrate the printing of a complex smart integrated system using only five functional inks: the fluoropolymer P(VDF:TrFE) (Poly(vinylidene fluoride trifluoroethylene) sensor ink, the conductive polymer PEDOT:PSS (poly(3,4 ethylenedioxythiophene):poly(styrene sulfonic acid) ink, a conductive carbon paste, a polymeric electrolyte and SU8 for separation. The result is a touchless human-machine interface, including piezo- and pyroelectric sensor pixels (sensitive to pressure changes and impinging infrared light), transistors for impedance matching and signal conditioning, and an electrochromic display. Applications may not only emerge in human-machine interfaces, but also in transient temperature or pressure sensing used in safety technology, in artificial skins and in disposable sensor labels.

Using modern human cortical bone distribution to test the systemic robusticity hypothesis.

Science.gov (United States)

Baab, Karen L; Copes, Lynn E; Ward, Devin L; Wells, Nora; Grine, Frederick E

2018-06-01

The systemic robusticity hypothesis links the thickness of cortical bone in both the cranium and limb bones. This hypothesis posits that thick cortical bone is in part a systemic response to circulating hormones, such as growth hormone and thyroid hormone, possibly related to physical activity or cold climates. Although this hypothesis has gained popular traction, only rarely has robusticity of the cranium and postcranial skeleton been considered jointly. We acquired computed tomographic scans from associated crania, femora and humeri from single individuals representing 11 populations in Africa and North America (n = 228). Cortical thickness in the parietal, frontal and occipital bones and cortical bone area in limb bone diaphyses were analyzed using correlation, multiple regression and general linear models to test the hypothesis. Absolute thickness values from the crania were not correlated with cortical bone area of the femur or humerus, which is at odds with the systemic robusticity hypothesis. However, measures of cortical bone scaled by total vault thickness and limb cross-sectional area were positively correlated between the cranium and postcranium. When accounting for a range of potential confounding variables, including sex, age and body mass, variation in relative postcranial cortical bone area explained ∼20% of variation in the proportion of cortical cranial bone thickness. While these findings provide limited support for the systemic robusticity hypothesis, cranial cortical thickness did not track climate or physical activity across populations. Thus, some of the variation in cranial cortical bone thickness in modern humans is attributable to systemic effects, but the driving force behind this effect remains obscure. Moreover, neither absolute nor proportional measures of cranial cortical bone thickness are positively correlated with total cranial bone thickness, complicating the extrapolation of these findings to extinct species where only cranial

Human-system interface design review guideline -- Process and guidelines: Final report. Revision 1, Volume 1

International Nuclear Information System (INIS)

1996-06-01

NUREG-0700, Revision 1, provides human factors engineering (HFE) guidance to the US Nuclear Regulatory Commission staff for its: (1) review of the human system interface (HSI) design submittals prepared by licensees or applications for a license or design certification of commercial nuclear power plants, and (2) performance of HSI reviews that could be undertaken as part of an inspection or other type of regulatory review involving HSI design or incidents involving human performance. The guidance consists of a review process and HFE guidelines. The document describes those aspects of the HSI design review process that are important to the identification and resolution of human engineering discrepancies that could adversely affect plant safety. Guidance is provided that could be used by the staff to review an applicant's HSI design review process or to guide the development of an HSI design review plan, e.g., as part of an inspection activity. The document also provides detailed HFE guidelines for the assessment of HSI design implementations. NUREG-0700, Revision 1, consists of three stand-alone volumes. Volume 1 consists of two major parts. Part 1 describes those aspects of the review process of the HSI design that are important to identifying and resolving human engineering discrepancies. Part 2 contains detailed guidelines for a human factors engineering review which identify criteria for assessing the implementation of an applicant's or licensee's HSI design

Experiences in the application of human factors engineering to the modernization of the interface man-machine

International Nuclear Information System (INIS)

Valdivia Martin, C.; Fernandez Illobre, L.; Trueba Alonso, P.; Cerezal Diez, J. E.

2014-01-01

This paper shows some of the experience gained during the application of the IFH to the modernization of the IHM. The experience of the application of IFH in modernization and modifications of design shows a positive effect, improving the IHM associated, with the acceptance of the end user. (Author)

A human activity approach to User Interfaces

DEFF Research Database (Denmark)

Bødker, Susanne

1989-01-01

the work situations in which computer-based artifacts are used: The framework deals with the role of the user interface in purposeful human work. Human activity theory is used in this analysis. The purpose of this article is to make the reader curious and hopefully open his or her eyes to a somewhat...

A Classification of Human-to-Human Communication during the Use of Immersive Teleoperation Interfaces

DEFF Research Database (Denmark)

Kraus, Martin; Kibsgaard, Martin

2015-01-01

We propose a new classification of the human-to-human communication during the use of immersive teleoperation interfaces based on real-life examples. While a large body of research is concerned with communication in collaborative virtual environments (CVEs), less research focuses on cases where...... of the proposed classification to real environments can offer useful reference cases. Using this extended classification not only allows us to discuss and understand differences and similarities of various forms of communication in a more systematic way, but it also provides guidelines and reference cases...... for the design of immersive teleoperation interfaces that support human-to-human communication....

Human-computer interface glove using flexible piezoelectric sensors

Science.gov (United States)

Cha, Youngsu; Seo, Jeonggyu; Kim, Jun-Sik; Park, Jung-Min

2017-05-01

In this note, we propose a human-computer interface glove based on flexible piezoelectric sensors. We select polyvinylidene fluoride as the piezoelectric material for the sensors because of advantages such as a steady piezoelectric characteristic and good flexibility. The sensors are installed in a fabric glove by means of pockets and Velcro bands. We detect changes in the angles of the finger joints from the outputs of the sensors, and use them for controlling a virtual hand that is utilized in virtual object manipulation. To assess the sensing ability of the piezoelectric sensors, we compare the processed angles from the sensor outputs with the real angles from a camera recoding. With good agreement between the processed and real angles, we successfully demonstrate the user interaction system with the virtual hand and interface glove based on the flexible piezoelectric sensors, for four hand motions: fist clenching, pinching, touching, and grasping.

A structural approach to constructing perspective efficient and reliable human-computer interfaces

International Nuclear Information System (INIS)

Balint, L.

1989-01-01

The principles of human-computer interface (HCI) realizations are investigated with the aim of getting closer to a general framework and thus, to a more or less solid background of constructing perspective efficient, reliable and cost-effective human-computer interfaces. On the basis of characterizing and classifying the different HCI solutions, the fundamental problems of interface construction are pointed out especially with respect to human error occurrence possibilities. The evolution of HCI realizations is illustrated by summarizing the main properties of past, present and foreseeable future interface generations. HCI modeling is pointed out to be a crucial problem in theoretical and practical investigations. Suggestions concerning HCI structure (hierarchy and modularity), HCI functional dynamics (mapping from input to output information), minimization of human error caused system failures (error-tolerance, error-recovery and error-correcting) as well as cost-effective HCI design and realization methodology (universal and application-oriented vs. application-specific solutions) are presented. The concept of RISC-based and SCAMP-type HCI components is introduced with the aim of having a reduced interaction scheme in communication and a well defined architecture in HCI components' internal structure. HCI efficiency and reliability are dealt with, by taking into account complexity and flexibility. The application of fast computerized prototyping is also briefly investigated as an experimental device of achieving simple, parametrized, invariant HCI models. Finally, a concise outline of an approach of how to construct ideal HCI's is also suggested by emphasizing the open questions and the need of future work related to the proposals, as well. (author). 14 refs, 6 figs

One health: The interface between veterinary and human health

Directory of Open Access Journals (Sweden)

Kshitiz Shrestha

2018-01-01

Full Text Available One Health is an emerging global key concept integrating human and animal health through international research and policy. The complex relationships between the human and animal have resulted in a human-animal-environment interface since prehistorical times. The people, animals, plants, and the environment are so intrinsically linked that prevention of risks and the mitigation of effects of crises that originate at the interface between humans, animals, and their environments can only improve health and wellbeing. The “One Health” approach has been successfully implemented in numerous projects around the world. The containment of pandemic threats such as avian influenza and severe acute respiratory syndrome within months of outbreak are few examples of successful applications of the One Health paradigm. The paper begins with a brief overview of the human-animal interface and continues with the socio-economic and public health impact caused by various zoonotic diseases such as Middle East respiratory syndrome, Influenza, and Ebola virus. This is followed by the role of “One Health” to deal the global problem by the global solution. It emphasizes the interdisciplinary collaboration, training for health professionals and institutional support to minimize global health threats due to infectious diseases. The broad definition of the concept is supposed to lead multiple interpretations that impede the effective implementation of One Health approach within veterinary profession, within the medical profession, by wildlife specialists and by environmentalists, while on the other side, it gives a value of interdisciplinary collaboration for reducing threats in human-animal-environment interface.

Medical Signal-Conditioning and Data-Interface System

Science.gov (United States)

Braun, Jeffrey; Jacobus, charles; Booth, Scott; Suarez, Michael; Smith, Derek; Hartnagle, Jeffrey; LePrell, Glenn

2006-01-01

A general-purpose portable, wearable electronic signal-conditioning and data-interface system is being developed for medical applications. The system can acquire multiple physiological signals (e.g., electrocardiographic, electroencephalographic, and electromyographic signals) from sensors on the wearer s body, digitize those signals that are received in analog form, preprocess the resulting data, and transmit the data to one or more remote location(s) via a radiocommunication link and/or the Internet. The system includes a computer running data-object-oriented software that can be programmed to configure the system to accept almost any analog or digital input signals from medical devices. The computing hardware and software implement a general-purpose data-routing-and-encapsulation architecture that supports tagging of input data and routing the data in a standardized way through the Internet and other modern packet-switching networks to one or more computer(s) for review by physicians. The architecture supports multiple-site buffering of data for redundancy and reliability, and supports both real-time and slower-than-real-time collection, routing, and viewing of signal data. Routing and viewing stations support insertion of automated analysis routines to aid in encoding, analysis, viewing, and diagnosis.

Development of Multimodal Human Interface Technology

Science.gov (United States)

Hirose, Michitaka

About 20 years have passed since the word “Virtual Reality” became popular. During these two decades, novel human interface technology so called “multimodal interface technology” has been formed. In this paper, firstly, recent progress in realtime CG, BCI and five senses IT is quickly reviewed. Since the life cycle of the information technology is said to be 20 years or so, novel directions and paradigms of VR technology can be found in conjunction with the technologies forementioned. At the end of the paper, these futuristic directions such as ultra-realistic media are briefly introduced.

Impact of familiarity on information complexity in human-computer interfaces

Directory of Open Access Journals (Sweden)

Bakaev Maxim

2016-01-01

Full Text Available A quantitative measure of information complexity remains very much desirable in HCI field, since it may aid in optimization of user interfaces, especially in human-computer systems for controlling complex objects. Our paper is dedicated to exploration of subjective (subject-depended aspect of the complexity, conceptualized as information familiarity. Although research of familiarity in human cognition and behaviour is done in several fields, the accepted models in HCI, such as Human Processor or Hick-Hyman’s law do not generally consider this issue. In our experimental study the subjects performed search and selection of digits and letters, whose familiarity was conceptualized as frequency of occurrence in numbers and texts. The analysis showed significant effect of information familiarity on selection time and throughput in regression models, although the R2 values were somehow low. Still, we hope that our results might aid in quantification of information complexity and its further application for optimizing interaction in human-machine systems.

A video, text, and speech-driven realistic 3-d virtual head for human-machine interface.

Science.gov (United States)

Yu, Jun; Wang, Zeng-Fu

2015-05-01

A multiple inputs-driven realistic facial animation system based on 3-D virtual head for human-machine interface is proposed. The system can be driven independently by video, text, and speech, thus can interact with humans through diverse interfaces. The combination of parameterized model and muscular model is used to obtain a tradeoff between computational efficiency and high realism of 3-D facial animation. The online appearance model is used to track 3-D facial motion from video in the framework of particle filtering, and multiple measurements, i.e., pixel color value of input image and Gabor wavelet coefficient of illumination ratio image, are infused to reduce the influence of lighting and person dependence for the construction of online appearance model. The tri-phone model is used to reduce the computational consumption of visual co-articulation in speech synchronized viseme synthesis without sacrificing any performance. The objective and subjective experiments show that the system is suitable for human-machine interaction.

Modern I and C systems

International Nuclear Information System (INIS)

Graf, A.

1997-01-01

The most important innovation stages of electronic I and C systems are summarized. The TELEPERM XS serves as the example to demonstrate the design of modern I and C systems as well as the use of computer-based tools. The paper explains the conditions of use of these tools during future system operation. By a comparative evaluation it is shown that the modernization of I and C systems brings not only increased reliability but also essential simplifications in operation as well as cost savings. Typical applications of the TELEPERM XS are in safety systems for reactor protection, and in the Engineered Safety Feature Actuation System. This is why, in conclusion, the author briefly refers to the design-based protection against systematic failures, which is a requirement of the nuclear safety engineering codes. (orig./CB) [de

Human-system interface design review guideline -- Process and guidelines: Final report. Revision 1, Volume 1

Energy Technology Data Exchange (ETDEWEB)

None

1996-06-01

NUREG-0700, Revision 1, provides human factors engineering (HFE) guidance to the US Nuclear Regulatory Commission staff for its: (1) review of the human system interface (HSI) design submittals prepared by licensees or applications for a license or design certification of commercial nuclear power plants, and (2) performance of HSI reviews that could be undertaken as part of an inspection or other type of regulatory review involving HSI design or incidents involving human performance. The guidance consists of a review process and HFE guidelines. The document describes those aspects of the HSI design review process that are important to the identification and resolution of human engineering discrepancies that could adversely affect plant safety. Guidance is provided that could be used by the staff to review an applicant`s HSI design review process or to guide the development of an HSI design review plan, e.g., as part of an inspection activity. The document also provides detailed HFE guidelines for the assessment of HSI design implementations. NUREG-0700, Revision 1, consists of three stand-alone volumes. Volume 1 consists of two major parts. Part 1 describes those aspects of the review process of the HSI design that are important to identifying and resolving human engineering discrepancies. Part 2 contains detailed guidelines for a human factors engineering review which identify criteria for assessing the implementation of an applicant`s or licensee`s HSI design.

An architecture for human-network interfaces

DEFF Research Database (Denmark)

Sonnenwald, Diane H.

1990-01-01

Some of the issues (and their consequences) that arise when human-network interfaces (HNIs) are viewed from the perspective of people who use and develop them are examined. Target attributes of HNI architecture are presented. A high-level architecture model that supports the attributes is discussed...

Integration of an intelligent systems behavior simulator and a scalable soldier-machine interface

Science.gov (United States)

Johnson, Tony; Manteuffel, Chris; Brewster, Benjamin; Tierney, Terry

2007-04-01

As the Army's Future Combat Systems (FCS) introduce emerging technologies and new force structures to the battlefield, soldiers will increasingly face new challenges in workload management. The next generation warfighter will be responsible for effectively managing robotic assets in addition to performing other missions. Studies of future battlefield operational scenarios involving the use of automation, including the specification of existing and proposed technologies, will provide significant insight into potential problem areas regarding soldier workload. The US Army Tank Automotive Research, Development, and Engineering Center (TARDEC) is currently executing an Army technology objective program to analyze and evaluate the effect of automated technologies and their associated control devices with respect to soldier workload. The Human-Robotic Interface (HRI) Intelligent Systems Behavior Simulator (ISBS) is a human performance measurement simulation system that allows modelers to develop constructive simulations of military scenarios with various deployments of interface technologies in order to evaluate operator effectiveness. One such interface is TARDEC's Scalable Soldier-Machine Interface (SMI). The scalable SMI provides a configurable machine interface application that is capable of adapting to several hardware platforms by recognizing the physical space limitations of the display device. This paper describes the integration of the ISBS and Scalable SMI applications, which will ultimately benefit both systems. The ISBS will be able to use the Scalable SMI to visualize the behaviors of virtual soldiers performing HRI tasks, such as route planning, and the scalable SMI will benefit from stimuli provided by the ISBS simulation environment. The paper describes the background of each system and details of the system integration approach.

The influence of life history and sexual dimorphism on entheseal changes in modern humans and African great apes.

Directory of Open Access Journals (Sweden)

Marco Milella

Full Text Available Entheseal changes have been widely studied with regard to their correlation to biomechanical stress and their usefulness for biocultural reconstructions. However, anthropological and medical studies have demonstrated the marked influence of both age and sex on the development of these features. Studies of entheseal changes are mostly aimed in testing functional hypotheses and are mostly focused on modern humans, with few data available for non-human primates. The lack of comparative studies on the effect of age and sex on entheseal changes represent a gap in our understanding of the evolutionary basis of both development and degeneration of the human musculoskeletal system. The aim of the present work is to compare age trajectories and patterns of sexual dimorphism in entheseal changes between modern humans and African great apes. To this end we analyzed 23 postcranial entheses in a human contemporary identified skeletal collection (N = 484 and compared the results with those obtained from the analysis of Pan (N = 50 and Gorilla (N = 47 skeletal specimens. Results highlight taxon-specific age trajectories possibly linked to differences in life history schedules and phyletic relationships. Robusticity trajectories separate Pan and modern humans from Gorilla, whereas enthesopathic patterns are unique in modern humans and possibly linked to their extended potential lifespan. Comparisons between sexes evidence a decreasing dimorphism in robusticity from Gorilla, to modern humans to Pan, which is likely linked to the role played by size, lifespan and physical activity on robusticity development. The present study confirms previous hypotheses on the possible relevance of EC in the study of life history, pointing moreover to their usefulness in evolutionary studies.

User Interface Composition with COTS-UI and Trading Approaches: Application for Web-Based Environmental Information Systems

Science.gov (United States)

Criado, Javier; Padilla, Nicolás; Iribarne, Luis; Asensio, Jose-Andrés

Due to the globalization of the information and knowledge society on the Internet, modern Web-based Information Systems (WIS) must be flexible and prepared to be easily accessible and manageable in real-time. In recent times it has received a special interest the globalization of information through a common vocabulary (i.e., ontologies), and the standardized way in which information is retrieved on the Web (i.e., powerful search engines, and intelligent software agents). These same principles of globalization and standardization should also be valid for the user interfaces of the WIS, but they are built on traditional development paradigms. In this paper we present an approach to reduce the gap of globalization/standardization in the generation of WIS user interfaces by using a real-time "bottom-up" composition perspective with COTS-interface components (type interface widgets) and trading services.

The proposed human factors engineering program plan for man-machine interface system design of the next generation NPP in Korea

International Nuclear Information System (INIS)

Oh, I.S.; Lee, H.C.; Seo, S.M.; Cheon, S.W.; Park, K.O.; Lee, J.W.; Sim, B.S.

1994-01-01

Human factors application to nuclear power plant (NPP) design, especially, to man-machine interface system (MMIS) design becomes an important issue among the licensing requirements. Recently, the nuclear regulatory bodies require the evidence of systematic human factors application to the MMIS design. Human Factors Engineering Program Plan (HFEPP), as a basis and central one among the human factors application by the MMIS designers. This paper describes the framework of HFEPP for the MMIS design of next generation NPP (NG-NPP) in Korea. This framework provides an integral plan and some bases of the systematic application of human factors to the MMIS design, and consists of purpose and scope, codes and standards, human factors organization, human factors tasks, engineering control methodology, human factors documentations, and milestones. The proposed HFEPP is a top level document to define and describe human factors tasks, based on each step of MMIS design process, in view point of how, what, when and by whom to be performed. (author). 11 refs, 1 fig

Evaluasi Human Machine Interface Menggunakan Kriteria Usability Pada Sistem E-learning Perguruan Tinggi

Directory of Open Access Journals (Sweden)

Akhmad Qashlim

2016-01-01

Full Text Available Integration HMI with usability in user interface design process is a standart of the success of a website. The design process is done through the approach to the end user to find a problem solution of human machine interface phenomena. It can also generate the maximum level of satisfaction and success of implementation of the website. The purpose of this research is to evaluate HMI using usabilitycriteria to know the application of HMI concept in e-learning and provide proposals for improvements to the HMI. Questionnaire Data were processed using a descriptive analysis and methods of CFA to know the variables that are weakest and which indicators have an important role in shaping the research variables. Evaluation results indicate the application concept of HMI in the e-learning had been done but not the maximum. Data analysis of the results obtained that the main problem lies in the accessibility criteria in the meantime indicator latent variables from forming error prevention, learnability, memorability, visibility and accessibility of influential factor loading values indicated significantly (unidimensionalitas in shaping the criteria of latent variables in first-order CFA. The end result of this research is the proposal of improvement as a HMI solution in the form of principles and technicsuser interface design. This solution is focused on the development of standards for the quality of the interface in e-learning systems and not on the digital learning content presented on the e-learning system. Keywords: Descriptive analisis; Human machine interface; Usability; Confirmatory factor analisys; Elearning

The Concept of Human Error and the Design of Reliable Human-Machine Systems

DEFF Research Database (Denmark)

Rasmussen, Jens

1995-01-01

The concept of human error is unreliable as a basis for design of reliable human-machine systems. Humans are basically highly adaptive and 'errors' are closely related to the process of adaptation and learning. Therefore, reliability of system operation depends on an interface that is not designed...... so as to support a pre-conceived operating procedure, but, instead, makes visible the deep, functional structure of the system together with the boundaries of acceptable operation in away that allows operators to 'touch' the boundaries and to learn to cope with the effects of errors in a reversible...... way. The concepts behind such 'ecological' interfaces are discussed, an it is argued that a 'typology' of visualization concepts is a pressing research need....

Development of an evaluation technique for human-machine interface

Energy Technology Data Exchange (ETDEWEB)

Min, Dae Hwan; Koo, Sang Hui; Ahn, Won Yeong; Ryu, Yeong Shin [Korea Univ., Seoul (Korea, Republic of)

1997-07-15

The purpose of this study is two-fold : firstly to establish an evaluation technique for HMI(Human Machine Interface) in NPPs(Nuclear Power Plants) and secondly to develop an architecture of a support system which can be used for the evaluation of HMI. In order to establish an evaluation technique, this study conducted literature review on basic theories of cognitive science studies and summarized the cognitive characteristics of humans. This study also surveyed evaluation techniques of HMI in general, and reviewed studies on the evaluation of HMI in NPPs. On the basis of this survey, the study established a procedure for the evaluation of HMI in NPPs in Korea and laid a foundation for empirical verification.

Development of an evaluation technique for human-machine interface

International Nuclear Information System (INIS)

Min, Dae Hwan; Koo, Sang Hui; Ahn, Won Yeong; Ryu, Yeong Shin

1997-07-01

The purpose of this study is two-fold : firstly to establish an evaluation technique for HMI(Human Machine Interface) in NPPs(Nuclear Power Plants) and secondly to develop an architecture of a support system which can be used for the evaluation of HMI. In order to establish an evaluation technique, this study conducted literature review on basic theories of cognitive science studies and summarized the cognitive characteristics of humans. This study also surveyed evaluation techniques of HMI in general, and reviewed studies on the evaluation of HMI in NPPs. On the basis of this survey, the study established a procedure for the evaluation of HMI in NPPs in Korea and laid a foundation for empirical verification

Development of Simulation-Based Evaluation System for Iterative Design of Human-Machine Interface in a Nuclear Power Plant - Application for Reducing Workload

International Nuclear Information System (INIS)

Fumizawa, Motoo; Kameda, Akiyuki; Nakagawa, Takashi; Wu Wei; Yoshikawa, Hidekazu

2003-01-01

Development of simulation-based evaluation and analysis support system for man-machine interface design (SEAMAID) has been conducted in the Nuclear Power Engineering Corporation to simulate the behavior of a few operators and the human-machine interface (HMI) in a commercialized pressurized water reactor plant. The workload is one of the key factors with respect to reducing the human error in the operation of nuclear power plants. In order to produce a high-quality design of HMI, the evaluation method was developed to simulate and analyze the operator's workload. Our method was adopted from the cognition model proposed by Reason. The workload such as the length of the visual point movement and the moving length of the operators was visualized in a monitor image during the simulation, and then recorded as a movie-file. As a consequence, the validation of SEAMAID was clarified

Standards for the user interface - Developing a user consensus. [for Space Station Information System

Science.gov (United States)

Moe, Karen L.; Perkins, Dorothy C.; Szczur, Martha R.

1987-01-01

The user support environment (USE) which is a set of software tools for a flexible standard interactive user interface to the Space Station systems, platforms, and payloads is described in detail. Included in the USE concept are a user interface language, a run time environment and user interface management system, support tools, and standards for human interaction methods. The goals and challenges of the USE are discussed as well as a methodology based on prototype demonstrations for involving users in the process of validating the USE concepts. By prototyping the key concepts and salient features of the proposed user interface standards, the user's ability to respond is greatly enhanced.

Modernization of control system using the digital control system

International Nuclear Information System (INIS)

Carrasco, J. A.; Fernandez, L.; Jimenez, A.

2002-01-01

Nowadays, all plant automation tendencies are based on the use of Digital Control System. In big industrial plants the control systems employed are Distributed Control Systems (DCS). The addition of these systems in nuclear power plants,implies an important adaptation process, because most of them were installed using analog control systems. This paper presents the objectives and the first results obtained, in a modernization project, focused in obtaining an engineering platform for making test and analysis of changes prior to their implementation in a nuclear plant. Modernization, Upgrade, DCS, Automation, Simulation, Training. (Author)

Modernization of the Cassini Ground System

Science.gov (United States)

Razo, Gus; Fujii, Tammy

2014-01-01

The Cassini Spacecraft and its ground system have been operational for over 16 years. Modernization presents several challenges due to the personnel, processes, and tools already invested and embedded into the current ground system structure. Every mission's ground system has its own unique complexities and challenges, involving various organizational units. As any mission from its inception to its execution, schedules are always tight. This forces GDS engineers to implement a working ground system that is not necessarily fully optimized. Ground system challenges increase as technology evolves and cyber threats become more sophisticated. Cassini's main challenges were due to its ground system existing before many security requirements were levied on the multi-mission tools and networks. This caused a domino effect on Cassini GDS tools that relied on outdated technological features. In the aerospace industry reliable and established technology is preferred over innovative yet less proven technology. Loss of data for a spacecraft mission can be catastrophic; therefore, there is a reluctance to make changes and updates to the ground system. Nevertheless, all missions and associated teams face the need to modernize their processes and tools. Systems development methods from well-known system analysis and design principles can be applied to many missions' ground systems. Modernization should always be considered, but should be done in such a way that it does not affect flexibility nor interfere with established practices. Cassini has accomplished a secure and efficient ground data system through periodic updates. The obstacles faced while performing the modernization of the Cassini ground system will be outlined, as well as the advantages and challenges that were encountered.

Development and human factors analysis of an augmented reality interface for multi-robot tele-operation and control

Science.gov (United States)

Lee, Sam; Lucas, Nathan P.; Ellis, R. Darin; Pandya, Abhilash

2012-06-01

This paper presents a seamlessly controlled human multi-robot system comprised of ground and aerial robots of semiautonomous nature for source localization tasks. The system combines augmented reality interfaces capabilities with human supervisor's ability to control multiple robots. The role of this human multi-robot interface is to allow an operator to control groups of heterogeneous robots in real time in a collaborative manner. It used advanced path planning algorithms to ensure obstacles are avoided and that the operators are free for higher-level tasks. Each robot knows the environment and obstacles and can automatically generate a collision-free path to any user-selected target. It displayed sensor information from each individual robot directly on the robot in the video view. In addition, a sensor data fused AR view is displayed which helped the users pin point source information or help the operator with the goals of the mission. The paper studies a preliminary Human Factors evaluation of this system in which several interface conditions are tested for source detection tasks. Results show that the novel Augmented Reality multi-robot control (Point-and-Go and Path Planning) reduced mission completion times compared to the traditional joystick control for target detection missions. Usability tests and operator workload analysis are also investigated.

Human-system interface design review guideline -- Reviewer`s checklist: Final report. Revision 1, Volume 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-06-01

NUREG-0700, Revision 1, provides human factors engineering (HFE) guidance to the US Nuclear Regulatory Commission staff for its: (1) review of the human system interface (HSI) design submittals prepared by licensees or applications for a license or design certification of commercial nuclear power plants, and (2) performance of HSI reviews that could be undertaken as part of an inspection or other type of regulatory review involving HSI design or incidents involving human performance. The guidance consists of a review process and HFE guidelines. The document describes those aspects of the HSI design review process that are important to the identification and resolution of human engineering discrepancies that could adversely affect plant safety. Guidance is provided that could be used by the staff to review an applicant`s HSI design review process or to guide the development of an HSI design review plan, e.g., as part of an inspection activity. The document also provides detailed HFE guidelines for the assessment of HSI design implementations. NUREG-0700, Revision 1, consists of three stand-alone volumes. Volume 2 is a complete set of the guidelines contained in Volume 1, Part 2, but in a checklist format that can be used by reviewers to assemble sets of individual guidelines for use in specific design reviews. The checklist provides space for reviewers to enter guidelines evaluations and comments.

Research on operation and maintenance support system adaptive to human recognition and understanding in human-centered plant

International Nuclear Information System (INIS)

Numano, Masayoshi; Matsuoka, Takeshi; Mitomo, N.

2004-01-01

As a human-centered plant, advanced nuclear power plant needs appropriate role sharing between human and mobile intelligent agents. Human-machine cooperation for plant operation and maintenance activities is also required with an advanced interface. Plant's maintenance is programmed using mobile robots working under the radiation environments instead of human beings. Operation and maintenance support system adaptive to human recognition and understanding should be developed to establish adequate human and machine interface so as to induce human capabilities to the full and enable human to take responsibility for plan's operation. Plant's operation and maintenance can be cooperative activities between human and intelligent automonous agents having surveillance and control functions. Infrastructure of multi-agent simulation system for the support system has been investigated and developed based on work plans derived from the scheduler. (T. Tanaka)

Using Ontologies for the E-learning System in Healthcare Human Resources Management

Directory of Open Access Journals (Sweden)

Lidia BAJENARU

2015-01-01

Full Text Available This paper provides a model for the use of ontology in e-learning systems for structuring educational content in the domain of healthcare human resources management (HHRM in Romania. In this respect we propose an effective method to improve the learning system by providing personalized learning paths created using ontology and advanced educational strategies to provide a personalized learning content for the medical staff. Personalization of e-learning process for the chosen target group will be achieved by setting up learning path for each user according to his profile. This will become possible using: domain ontology, learning objects, modeling student knowledge. Developing an ontology-based system for competence management allows complex interactions, providing intelligent interfacing. This is a new approach for the healthcare system managers in permanent training based on e-learning technologies and specific ontologies in a complex area that needs urgent modernization and efficiency to meet the public health economic, social and political context of Romania.

Framework for man-machine interface design evaluation system considering cognitive factor

International Nuclear Information System (INIS)

Itoh, Toru; Sasaki, Kazunori; Yoshikawa, Hidekazu; Takahashi, Makoto; Furuta, Tomihiko.

1994-01-01

It is necessary to improve human reliability in order to gain a higher reliability of the total plant system taking an account of development of plant automation and improvement of machine reliability. Therefore, the role of the man-machine system will come to be important. Accordingly, the evaluation of the man-machine system design information is desired in order to solve the mismatch problem between plant information presented by the man-machine system and information required by the operator comprehensively. This paper discusses required functions and software framework for the man-machine interface design evaluation system. The man-machine interface design evaluation system has features to extract the potential matters which are inherent on the design information of man-machine system by simulating the operator behavior, the plant system and the man-machine system, considering the operator's cognitive performance and time dependency. (author)

Human-system interface design review guideline -- Review software and user's guide: Final report. Revision 1, Volume 3

International Nuclear Information System (INIS)

1996-06-01

NUREG-0700, Revision 1, provides human factors engineering (HFE) guidance to the US Nuclear Regulatory Commission staff for its: (1) review of the human system interface (HSI) design submittals prepared by licensees or applications for a license or design certification of commercial nuclear power plants, and (2) performance of HSI reviews that could be undertaken as part of an inspection or other type of regulatory review involving HSI design or incidents involving human performance. The guidance consists of a review process and HFE guidelines. The document describes those aspects of the HSI design review process that are important to the identification and resolution of human engineering discrepancies that could adversely affect plant safety. Guidance is provided that could be used by the staff to review an applicant's HSI design review process or to guide the development of an HSI design review plan, e.g., as part of an inspection activity. The document also provides detailed HFE guidelines for the assessment of HSI design implementations. NUREG-0700, Revision 1, consists of three stand-alone volumes. Volume 3 contains an interactive software application of the NUREG-0700, Revision 1 guidance and a user's guide for this software. The software supports reviewers during review preparation, evaluation design using the human factors engineering guidelines, and in report preparation. The user's guide provides system requirements and installation instructions, detailed explanations of the software's functions and features, and a tutorial on using the software

Human Machine Interface and Usability Issues: Exploring a Preliminary Mission Management System Evaluation Methodology

National Research Council Canada - National Science Library

Kardos, Monique

2001-01-01

...) concept demonstrator test during June 2000. The questionnaire was designed to examine usability and interface issues relating to the design of the systems or tools, and to provide suggestions for future iterations of the system...

The oldest anatomically modern humans from far southeast Europe: direct dating, culture and behavior.

Directory of Open Access Journals (Sweden)

Sandrine Prat

Full Text Available BACKGROUND: Anatomically Modern Humans (AMHs are known to have spread across Europe during the period coinciding with the Middle to Upper Paleolithic transition. Whereas their dispersal into Western Europe is relatively well established, evidence of an early settlement of Eastern Europe by modern humans are comparatively scarce. METHODOLOGY/PRINCIPAL FINDING: Based on a multidisciplinary approach for the study of human and faunal remains, we describe here the oldest AMH remains from the extreme southeast Europe, in conjunction with their associated cultural and paleoecological background. We applied taxonomy, paleoecology, and taphonomy combined with geomorphology, stratigraphy, archeology and radiocarbon dating. More than 160 human bone remains have been discovered. They originate from a well documented Upper Paleolithic archeological layer (Gravettian cultural tradition from the site of Buran-Kaya III located in Crimea (Ukraine. The combination of non-metric dental traits and the morphology of the occipital bones allow us to attribute the human remains to Anatomically Modern Humans. A set of human and faunal remains from this layer has been radiocarbon dated by Accelerator Mass Spectrometry. The direct-dating results of human bone establish a secure presence of AMHs at 31,900+240/-220 BP in this region. They are the oldest direct evidence of the presence of AMHs in a well documented archeological context. Based on taphonomical observations (cut marks and distribution of skeletal elements, they represent the oldest Upper Paleolithic modern humans from Eastern Europe, showing post-mortem treatment of the dead as well. CONCLUSION/SIGNIFICANCE: These findings are essential for the debate on the spread of modern humans in Europe during the Upper Paleolithic, as well as their cultural behaviors.

The oldest anatomically modern humans from far southeast Europe: direct dating, culture and behavior.

Science.gov (United States)

Prat, Sandrine; Péan, Stéphane C; Crépin, Laurent; Drucker, Dorothée G; Puaud, Simon J; Valladas, Hélène; Lázničková-Galetová, Martina; van der Plicht, Johannes; Yanevich, Alexander

2011-01-01

Anatomically Modern Humans (AMHs) are known to have spread across Europe during the period coinciding with the Middle to Upper Paleolithic transition. Whereas their dispersal into Western Europe is relatively well established, evidence of an early settlement of Eastern Europe by modern humans are comparatively scarce. Based on a multidisciplinary approach for the study of human and faunal remains, we describe here the oldest AMH remains from the extreme southeast Europe, in conjunction with their associated cultural and paleoecological background. We applied taxonomy, paleoecology, and taphonomy combined with geomorphology, stratigraphy, archeology and radiocarbon dating. More than 160 human bone remains have been discovered. They originate from a well documented Upper Paleolithic archeological layer (Gravettian cultural tradition) from the site of Buran-Kaya III located in Crimea (Ukraine). The combination of non-metric dental traits and the morphology of the occipital bones allow us to attribute the human remains to Anatomically Modern Humans. A set of human and faunal remains from this layer has been radiocarbon dated by Accelerator Mass Spectrometry. The direct-dating results of human bone establish a secure presence of AMHs at 31,900+240/-220 BP in this region. They are the oldest direct evidence of the presence of AMHs in a well documented archeological context. Based on taphonomical observations (cut marks and distribution of skeletal elements), they represent the oldest Upper Paleolithic modern humans from Eastern Europe, showing post-mortem treatment of the dead as well. These findings are essential for the debate on the spread of modern humans in Europe during the Upper Paleolithic, as well as their cultural behaviors.

Human Factors Engineering Aspects of Modifications in Control Room Modernization

Energy Technology Data Exchange (ETDEWEB)

Hugo, Jacques [Idaho National Lab. (INL), Idaho Falls, ID (United States); Clefton, Gordon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-06-01

This report describes the basic aspects of control room modernization projects in the U.S. nuclear industry and the need for supplementary guidance on the integration of human factors considerations into the licensing and regulatory aspects of digital upgrades. The report pays specific attention to the integration of principles described in NUREG-0711 (Human Factors Engineering Program Review Model) and how supplementary guidance can help to raise general awareness in the industry regarding the complexities of control room modernization projects created by many interdependent regulations, standards and guidelines. The report also describes how human factors engineering principles and methods provided by various resources and international standards can help in navigating through the process of licensing digital upgrades. In particular, the integration of human factors engineering guidance and requirements into the process of licensing digital upgrades can help reduce uncertainty related to development of technical bases for digital upgrades that will avoid the introduction of new failure modes.

Cognitive engineering in the design of human-computer interaction and expert systems

International Nuclear Information System (INIS)

Salvendy, G.

1987-01-01

The 68 papers contributing to this book cover the following areas: Theories of Interface Design; Methodologies of Interface Design; Applications of Interface Design; Software Design; Human Factors in Speech Technology and Telecommunications; Design of Graphic Dialogues; Knowledge Acquisition for Knowledge-Based Systems; Design, Evaluation and Use of Expert Systems. This demonstrates the dual role of cognitive engineering. On the one hand cognitive engineering is utilized to design computing systems which are compatible with human cognition and can be effectively and be easily utilized by all individuals. On the other hand, cognitive engineering is utilized to transfer human cognition into the computer for the purpose of building expert systems. Two papers are of interest to INIS

Investigation of human-robot interface performance in household environments

Science.gov (United States)

Cremer, Sven; Mirza, Fahad; Tuladhar, Yathartha; Alonzo, Rommel; Hingeley, Anthony; Popa, Dan O.

2016-05-01

Today, assistive robots are being introduced into human environments at an increasing rate. Human environments are highly cluttered and dynamic, making it difficult to foresee all necessary capabilities and pre-program all desirable future skills of the robot. One approach to increase robot performance is semi-autonomous operation, allowing users to intervene and guide the robot through difficult tasks. To this end, robots need intuitive Human-Machine Interfaces (HMIs) that support fine motion control without overwhelming the operator. In this study we evaluate the performance of several interfaces that balance autonomy and teleoperation of a mobile manipulator for accomplishing several household tasks. Our proposed HMI framework includes teleoperation devices such as a tablet, as well as physical interfaces in the form of piezoresistive pressure sensor arrays. Mobile manipulation experiments were performed with a sensorized KUKA youBot, an omnidirectional platform with a 5 degrees of freedom (DOF) arm. The pick and place tasks involved navigation and manipulation of objects in household environments. Performance metrics included time for task completion and position accuracy.

US-APWR human systems interface system verification and validation results. Application of the Mitsubishi advanced design to the US market

International Nuclear Information System (INIS)

Hall, Robert E.; Easter, James; Roth, Emilie; Kabana, Leonard; Takahashi, Koichi; Clouser, Timothy

2009-01-01

The US-APWR, under Design Certification Review by the US Nuclear Regulatory Commission, is a four loop evolutionary pressurized water reactor with a four train active safety system by Mitsubishi Heavy Industries and Instrumentation and Control System (I and C)/Human Systems Interface (HSI) platform applied by Mitsubishi Electric Corporation. This design is currently being applied to the latest Japanese PWR plant under construction and to the nuclear power plant I and C modernization program in Japan. The US-APWR's fully digital I and C system and HSI platform utilizes computerized systems, including computer based procedures and alarm prioritization, relying principally on an HSI system with soft controls, console based video display units and a large overview wall display panel. Conventional hard controls are limited to Safety System level manual actions and a Diverse Actuation System. The overall design philosophy is based on the concept that operator performance will be enhanced through the integration of safety- and non-safety display and control systems in a robust digital environment. This philosophy is augmented, for diversity, by the application of independent safety-only soft displays and controls. As with all advanced designs, the digital systems resolve many long- standing issues of human and system performance while opening a number of new, less understood, questions. This paper discusses a testing program that begins to address these new questions and specifically explores the needs of moving a mature design into the US market with minimum changes from its original design. Details for the program took shape during 2007 and early 2008, resulting in an eight-week testing program during the months of July and August 2008. This extensive verification and validation program on the advanced design was undertaken with the objective of assessing United States operators' performance in this digital design environment. This testing program included analyses that

A Distributed Tactile Sensor for Intuitive Human-Robot Interfacing

Directory of Open Access Journals (Sweden)

Andrea Cirillo

2017-01-01

Full Text Available Safety of human-robot physical interaction is enabled not only by suitable robot control strategies but also by suitable sensing technologies. For example, if distributed tactile sensors were available on the robot, they could be used not only to detect unintentional collisions, but also as human-machine interface by enabling a new mode of social interaction with the machine. Starting from their previous works, the authors developed a conformable distributed tactile sensor that can be easily conformed to the different parts of the robot body. Its ability to estimate contact force components and to provide a tactile map with an accurate spatial resolution enables the robot to handle both unintentional collisions in safe human-robot collaboration tasks and intentional touches where the sensor is used as human-machine interface. In this paper, the authors present the characterization of the proposed tactile sensor and they show how it can be also exploited to recognize haptic tactile gestures, by tailoring recognition algorithms, well known in the image processing field, to the case of tactile images. In particular, a set of haptic gestures has been defined to test three recognition algorithms on a group of 20 users. The paper demonstrates how the same sensor originally designed to manage unintentional collisions can be successfully used also as human-machine interface.

An Architectural Experience for Interface Design

Science.gov (United States)

Gong, Susan P.

2016-01-01

The problem of human-computer interface design was brought to the foreground with the emergence of the personal computer, the increasing complexity of electronic systems, and the need to accommodate the human operator in these systems. With each new technological generation discovering the interface design problems of its own technologies, initial…

Ecocultural range-expansion scenarios for the replacement or assimilation of Neanderthals by modern humans.

Science.gov (United States)

Wakano, Joe Yuichiro; Gilpin, William; Kadowaki, Seiji; Feldman, Marcus W; Aoki, Kenichi

2018-02-01

Recent archaeological records no longer support a simple dichotomous characterization of the cultures/behaviors of Neanderthals and modern humans, but indicate much cultural/behavioral variability over time and space. Thus, in modeling the replacement or assimilation of Neanderthals by modern humans, it is of interest to consider cultural dynamics and their relation to demographic change. The ecocultural framework for the competition between hominid species allows their carrying capacities to depend on some measure of the levels of culture they possess. In the present study both population densities and the densities of skilled individuals in Neanderthals and modern humans are spatially distributed and subject to change by spatial diffusion, ecological competition, and cultural transmission within each species. We analyze the resulting range expansions in terms of the demographic, ecological and cultural parameters that determine how the carrying capacities relate to the local densities of skilled individuals in each species. Of special interest is the case of cognitive and intrinsic-demographic equivalence of the two species. The range expansion dynamics may consist of multiple wave fronts of different speeds, each of which originates from a traveling wave solution. Properties of these traveling wave solutions are mathematically derived. Depending on the parameters, these traveling waves can result in replacement of Neanderthals by modern humans, or assimilation of the former by the latter. In both the replacement and assimilation scenarios, the first wave of intrusive modern humans is characterized by a low population density and a low density of skilled individuals, with implications for archaeological visibility. The first invasion is due to weak interspecific competition. A second wave of invasion may be induced by cultural differences between moderns and Neanderthals. Spatially and temporally extended coexistence of the two species, which would have

Constellation Program Human-System Integration Requirements. Revision E, Nov. 19, 2010

Science.gov (United States)

Dory, Jonathan

2010-01-01

The Human-Systems Integration Requirements (HSIR) in this document drive the design of space vehicles, their systems, and equipment with which humans interface in the Constellation Program (CxP). These requirements ensure that the design of Constellation (Cx) systems is centered on the needs, capabilities, and limitations of the human. The HSIR provides requirements to ensure proper integration of human-to-system interfaces. These requirements apply to all mission phases, including pre-launch, ascent, Earth orbit, trans-lunar flight, lunar orbit, lunar landing, lunar ascent, Earth return, Earth entry, Earth landing, post-landing, and recovery. The Constellation Program must meet NASA's Agency-level human rating requirements, which are intended to ensure crew survival without permanent disability. The HSIR provides a key mechanism for achieving human rating of Constellation systems.

Influence of human-machine-interfaces on the error-proneness of operator interaction with technical systems

International Nuclear Information System (INIS)

Boussoffara, Badi; Elzer, Peter F.

1999-01-01

The paper gives an overview over a research project that has been jointly conducted by four research institutions in Germany since October 1995 with the financial support of the Volkswagen Foundation Germany. The aim of this project is to experimentally investigate the influence of the Human Computer Interface (HCI) on the error-proneness of operators during classification and diagnosis of various process states. Since evaluation of the complete chain 'activation - detection -recognition - diagnosis - action' would have caused some ambiguities with respect to the interpretation of the experimental data only detection and classification of unwanted process states have been evaluated. Depending on the requirements of the various types of experiments the following experimental environments were set up: IPP, IfKog: a simulator of a coal-fired power station (courtesy of ABB); ISTec: a simulator of a nuclear power station (courtesy of GRS); several types of interfaces designed by IPP and IfKog, implemented at IPP; interfaces designed and implemented at ISTec (author) (ml)

Design of Human-Machine Interface and altering of pelvic obliquity with RGR Trainer.

Science.gov (United States)

Pietrusinski, Maciej; Unluhisarcikli, Ozer; Mavroidis, Constantinos; Cajigas, Iahn; Bonato, Paolo

2011-01-01

The Robotic Gait Rehabilitation (RGR) Trainer targets secondary gait deviations in stroke survivors undergoing rehabilitation. Using an impedance control strategy and a linear electromagnetic actuator, the device generates a force field to control pelvic obliquity through a Human-Machine Interface (i.e. a lower body exoskeleton). Herein we describe the design of the RGR Trainer Human-Machine Interface (HMI) and we demonstrate the system's ability to alter the pattern of movement of the pelvis during gait in a healthy subject. Results are shown for experiments during which we induced hip-hiking - in healthy subjects. Our findings indicate that the RGR Trainer has the ability of affecting pelvic obliquity during gait. Furthermore, we provide preliminary evidence of short-term retention of the modified pelvic obliquity pattern induced by the RGR Trainer. © 2011 IEEE

Applications for Packetized Memory Interfaces

OpenAIRE

Watson, Myles Glen

2015-01-01

The performance of the memory subsystem has a large impact on the performance of modern computer systems. Many important applications are memory bound and others are expected to become memory bound in the future. The importance of memory performance makes it imperative to understand and optimize the interactions between applications and the system architecture. Prototyping and exploring various configurations of memory systems can give important insights, but current memory interfaces are lim...

Ecological Interface Design

DEFF Research Database (Denmark)

Vicente, Kim J.; Rasmussen, Jens

1992-01-01

A theoretical framework for designing interfaces for complex human-machine systems is proposed. The framework, called ecological interface design (EID), is based on the skills, rules, knowledge taxonomy of cognitive control. The basic goal of EID is twofold: first, not to force processing...

Icinga Monitoring System Interface

CERN Document Server

Neculae, Alina Georgiana

2014-01-01

The aim of this project is to develop a web interface that would be used by the Icinga monitoring system to manage the CMS online cluster, in the experimental site. The interface would allow users to visualize the information in a compressed and intuitive way, as well as modify the information of each individual object and edit the relationships between classes.

The modernization of the process computer of the Trillo Nuclear Power Plant

International Nuclear Information System (INIS)

Martin Aparicio, J.; Atanasio, J.

2011-01-01

The paper describes the modernization of the Process computer of the Trillo Nuclear Power Plant. The process computer functions, have been incorporated in the non Safety I and C platform selected in Trillo NPP: the Siemens SPPA-T2000 OM690 (formerly known as Teleperm XP). The upgrade of the Human Machine Interface of the control room has been included in the project. The modernization project has followed the same development process used in the upgrade of the process computer of PWR German nuclear power plants. (Author)

Ayurveda-modern medicine interface: A critical appraisal of studies of Ayurvedic medicines to treat osteoarthritis and rheumatoid arthritis.

Science.gov (United States)

Chopra, Arvind; Saluja, Manjit; Tillu, Girish

2010-07-01

The potential of Ayurvedic philosophy and medicines needs to be recognized and converted into real life treatment paradigm. This article describes a comprehensive therapeutic approach used in Ayurveda and modern medicine to treat arthritis. We present concise summary of various controlled drug trials carried out by us to validate standardized Ayurvedic drugs using modern medicine protocol to treat Rheumatoid Arthritis and Osteoarthritis knees. Several of the latter are published. The trials consistently demonstrate excellent safety of Ayurvedic medicines but often fail to unequivocally show superior efficacy. Some key findings of a recently unpublished trial in OA knees are also presented to show equivalence between Ayurvedic medicine and celecoxib and glucosamine, and we speculate that equivalence trials may be a way forward. The data from the trials also supports the Ayurvedic 'Rasayana' concept of immune-modulation and healing. We need to interpret logic of Ayurveda when, adopting modern science tools in drug development and validation and much research is required. Validation of Ayurvedic medicines using the latter approach may lead to an evidence based Ayurveda - Modern Medicine interface. Also, in pursuit of finding better treatment solutions, we ought to step beyond the realm of only drugs and attempt validation of comprehensive specific treatment package as per classical Ayurveda. Finally, validation of a combined (Ayurveda and modern medicine) therapeutic approach with superior efficacy and safety is likely to be a major leap in overcoming some of the current frustrations to treat difficult disorders like arthritis using only modern medicines.

Interfacing system LOCA risk assessment: Methodology and application

International Nuclear Information System (INIS)

Galyean, W.J.; Schroeher, J.A.; Hanson, D.J.

1991-01-01

The United States Nuclear Regulatory Commission (NRC) is sponsoring a research program to develop an improved understanding of the human factors hardware, and accident consequence issues that dominate the risk from an Interfacing Systems Loss-of-Coolant Accident (ISLOCA) at a nuclear power plant. To accomplish this program, a methodology has been developed for estimating the core damage frequency and risk associated with an ISLOCA. The steps of the methodology are described with emphasis on one step which is unique, estimation of the probability of rupture of the low pressure systems. A trial application of the methodology was made for a Pressurized Water Reactor (PWR). The results are believed to be plant specific and indicate that human errors during startup and shutdown could be significant contributors to ISLOCA risk at the plant evaluated. 10 refs

Standard interfaces for program-modular multiprocessor systems

International Nuclear Information System (INIS)

Chernykh, E.V.

1982-01-01

The peculiarities of the structures of existing and developed standard interfaces used in automation systems for nuclear physical experiments are considered. general structural characteristics of multiprocessor system interfaces are revealed. The comparison of the existing system CAMAC crate and designed standards of COMPEX, E3S and FASTBUS interfaces by capacity and relative cost is carried out. The analysis of the given data shows that operation of any interface is more advantageous at the rates close to capacity values, the relative cost being minimum. In this case the advantage is on the side of interfaces with greater capacity values for which at a moderated decrease of the exchange or requests processing rate the relative costs grow slower. A higher capacity of one-cycle exchange is provided with functional data way specialization in the interface. The conclusion is drawn that most perspective trend in the development of automation systems for high energy physics experiments is using FASTBUS standard

Human trafficking - modern day slavery: Menneskehandel i nutidens samfund

OpenAIRE

Holberg, Christina; Wilson, Philippa Rose Lucy; Larsen, Maiken Hollænder; Sennahøj, Cecilie; Søderberg, Ene Alicia

2014-01-01

This paper aims to approach the concept of human trafficking from a historical, cultural and philosophical point of view in order to cover the two dimensions: History and Culture and Philosophy and Science. It will be focusing on human trafficking, in the form of the sexual exploitation of women, and it’s existence within Europe. With a focus on human trafficking in the form of sexual exploitation of women, the main intention of this paper is to investigate the modern form of slavery through ...

Overview Electrotactile Feedback for Enhancing Human Computer Interface

Science.gov (United States)

Pamungkas, Daniel S.; Caesarendra, Wahyu

2018-04-01

To achieve effective interaction between a human and a computing device or machine, adequate feedback from the computing device or machine is required. Recently, haptic feedback is increasingly being utilised to improve the interactivity of the Human Computer Interface (HCI). Most existing haptic feedback enhancements aim at producing forces or vibrations to enrich the user’s interactive experience. However, these force and/or vibration actuated haptic feedback systems can be bulky and uncomfortable to wear and only capable of delivering a limited amount of information to the user which can limit both their effectiveness and the applications they can be applied to. To address this deficiency, electrotactile feedback is used. This involves delivering haptic sensations to the user by electrically stimulating nerves in the skin via electrodes placed on the surface of the skin. This paper presents a review and explores the capability of electrotactile feedback for HCI applications. In addition, a description of the sensory receptors within the skin for sensing tactile stimulus and electric currents alsoseveral factors which influenced electric signal to transmit to the brain via human skinare explained.

A standard format and a graphical user interface for spin system specification.

Science.gov (United States)

Biternas, A G; Charnock, G T P; Kuprov, Ilya

2014-03-01

We introduce a simple and general XML format for spin system description that is the result of extensive consultations within Magnetic Resonance community and unifies under one roof all major existing spin interaction specification conventions. The format is human-readable, easy to edit and easy to parse using standard XML libraries. We also describe a graphical user interface that was designed to facilitate construction and visualization of complicated spin systems. The interface is capable of generating input files for several popular spin dynamics simulation packages. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Programmable electronic system for analog and digital gamma cameras modernization

International Nuclear Information System (INIS)

Osorio Deliz, J. F.; Diaz Garcia, A.; Arista Omeu, E. J.

2013-01-01

At present the use of analog and digital gamma cameras is continuously increasing in developing countries. Many of them still largely rely in old hardware electronics, which in many cases limits their use in actual nuclear medicine diagnostic studies. For this reason worldwide there are different medical equipment manufacturing companies engaged into partial or total Gamma Cameras modernization. Nevertheless in several occasions acquisition prices are not affordable for developing countries. This work describes the basic features of a programmable electronic system that allows improving acquisitions functions and processing of analog and digital gamma cameras. This system is based on an electronic board for the acquisition and digitization of nuclear pulses which have been generated by gamma camera detector. It comprises a hardware interface with PC and the associated software to fully signal processing. Signal shaping and image processing are included. The extensive use of reference tables in the processing and signal imaging software allowed the optimization of the processing speed. Time design and system cost were also decreased. (Author)

Outline of human machine interface at Rokkasho reprocessing plant

International Nuclear Information System (INIS)

Niioka, T.; Miyazaki, T.; Fujita, D.; Esashika, A.; Yoshida, Y.; Nakamura, W.; Tochigi, T.; Yoshimoto, A.; Yokoi, M.

2006-01-01

The Japan Nuclear Fuel Limited (JNFL) has been performing the active tests since the end of March, 2006, for its Rokkasho Reprocessing Plant using the spent fuels retrieved from the Light Water Reactors. At the early stage of the tests relatively low burn-up fuels have been used, and the burn-up will be increased at later stages until the start of commercial operation planned next year. The plant is operated from the main control room in the Control Building, where two types of operator consoles are located for plant monitoring and operation. The Operator Interface Station (OIS) driven by computer systems is chiefly used for instrumentation and control for production activities during normal operation. In addition to this, safety panels composed of hardware circuits are installed for nuclear safety functions such as criticality safety management, explosion protection, and confinement of radioactive materials. This paper outlines the Human Machine Interface features applied to the Rokkasho Reprocessing Plant. (authors)

Astronomical References in Chaucer: What Can Modern Students Learn from Studying Ancient Texts?

Directory of Open Access Journals (Sweden)

Victor Kennedy

2005-06-01

Full Text Available One of the problems in the field of English literature studies is that, with compartmentalization and specialization, it becomes introspective to the point where it devolves into the study of metafiction and metacriticism. At its heart, however, literature has to be about something: Thackeray claimed its subject is human nature, but human nature is based in the interface between human and nature. This paper explores some of the problems in the interface between human knowledge, institutions, and nature, and will offer an example of cross-disciplinary, historical study to illustrate a well-known but, to most modern readers, impenetrable medieval text, Chaucer’s Treatise on the Astrolabe. It ends with three recommendations: look to history, cross boundaries between academic fields, and use practical, as well as theoretical, teaching methods.

Controlling a human-computer interface system with a novel classification method that uses electrooculography signals.

Science.gov (United States)

Wu, Shang-Lin; Liao, Lun-De; Lu, Shao-Wei; Jiang, Wei-Ling; Chen, Shi-An; Lin, Chin-Teng

2013-08-01

Electrooculography (EOG) signals can be used to control human-computer interface (HCI) systems, if properly classified. The ability to measure and process these signals may help HCI users to overcome many of the physical limitations and inconveniences in daily life. However, there are currently no effective multidirectional classification methods for monitoring eye movements. Here, we describe a classification method used in a wireless EOG-based HCI device for detecting eye movements in eight directions. This device includes wireless EOG signal acquisition components, wet electrodes and an EOG signal classification algorithm. The EOG classification algorithm is based on extracting features from the electrical signals corresponding to eight directions of eye movement (up, down, left, right, up-left, down-left, up-right, and down-right) and blinking. The recognition and processing of these eight different features were achieved in real-life conditions, demonstrating that this device can reliably measure the features of EOG signals. This system and its classification procedure provide an effective method for identifying eye movements. Additionally, it may be applied to study eye functions in real-life conditions in the near future.

The Human Blood Metabolome-Transcriptome Interface.

Directory of Open Access Journals (Sweden)

Jörg Bartel

2015-06-01

Full Text Available Biological systems consist of multiple organizational levels all densely interacting with each other to ensure function and flexibility of the system. Simultaneous analysis of cross-sectional multi-omics data from large population studies is a powerful tool to comprehensively characterize the underlying molecular mechanisms on a physiological scale. In this study, we systematically analyzed the relationship between fasting serum metabolomics and whole blood transcriptomics data from 712 individuals of the German KORA F4 cohort. Correlation-based analysis identified 1,109 significant associations between 522 transcripts and 114 metabolites summarized in an integrated network, the 'human blood metabolome-transcriptome interface' (BMTI. Bidirectional causality analysis using Mendelian randomization did not yield any statistically significant causal associations between transcripts and metabolites. A knowledge-based interpretation and integration with a genome-scale human metabolic reconstruction revealed systematic signatures of signaling, transport and metabolic processes, i.e. metabolic reactions mainly belonging to lipid, energy and amino acid metabolism. Moreover, the construction of a network based on functional categories illustrated the cross-talk between the biological layers at a pathway level. Using a transcription factor binding site enrichment analysis, this pathway cross-talk was further confirmed at a regulatory level. Finally, we demonstrated how the constructed networks can be used to gain novel insights into molecular mechanisms associated to intermediate clinical traits. Overall, our results demonstrate the utility of a multi-omics integrative approach to understand the molecular mechanisms underlying both normal physiology and disease.

Human factors considerations in control room modernization: Trends and personnel performance issues

International Nuclear Information System (INIS)

O'Hara, J.; Stubler, B.; Kramer, J.

1997-01-01

Advanced human-system interface (HSI) technology is being integrated into existing nuclear plants as part of plant modifications and upgrades. The result of this trend is that hybrid HSIs are created, i.e., HSIs containing a mixture of conventional (analog) and advanced (digital) technology. The purpose of the present research is to define the potential effects of hybrid HSIs on personnel performance and plant safety and to develop human factors guidance for safety reviews of them where necessary. In support of this objective, human factors topics associated with hybrid HSIs were identified. A human performance topic is an aspect of hybrid HSIs, such as a design or implementation feature, for which human performance concerns were identified. The topics were then evaluated for their potential significance to plant safety. Twelve topics were identified as potentially safety significant issues, i.e., their human performance concerns have the potential to compromise plant safety. The issues were then prioritized and a subset was selected for design review guidance development. 6 refs

Early modern human lithic technology from Jerimalai, East Timor.

Science.gov (United States)

Marwick, Ben; Clarkson, Chris; O'Connor, Sue; Collins, Sophie

2016-12-01

Jerimalai is a rock shelter in East Timor with cultural remains dated to 42,000 years ago, making it one of the oldest known sites of modern human activity in island Southeast Asia. It has special global significance for its record of early pelagic fishing and ancient shell fish hooks. It is also of regional significance for its early occupation and comparatively large assemblage of Pleistocene stone artefacts. Three major findings arise from our study of the stone artefacts. First, there is little change in lithic technology over the 42,000 year sequence, with the most noticeable change being the addition of new artefact types and raw materials in the mid-Holocene. Second, the assemblage is dominated by small chert cores and implements rather than pebble tools and choppers, a pattern we argue pattern, we argue, that is common in island SE Asian sites as opposed to mainland SE Asian sites. Third, the Jerimalai assemblage bears a striking resemblance to the assemblage from Liang Bua, argued by the Liang Bua excavation team to be associated with Homo floresiensis. We argue that the near proximity of these two islands along the Indonesian island chain (c.100 km apart), the long antiquity of modern human occupation in the region (as documented at Jerimalai), and the strong resemblance of distinctive flake stone technologies seen at both sites, raises the intriguing possibility that both the Liang Bua and Jerimalai assemblages were created by modern humans. Copyright © 2016 Elsevier Ltd. All rights reserved.

Human-computer interface incorporating personal and application domains

Science.gov (United States)

Anderson, Thomas G [Albuquerque, NM

2011-03-29

The present invention provides a human-computer interface. The interface includes provision of an application domain, for example corresponding to a three-dimensional application. The user is allowed to navigate and interact with the application domain. The interface also includes a personal domain, offering the user controls and interaction distinct from the application domain. The separation into two domains allows the most suitable interface methods in each: for example, three-dimensional navigation in the application domain, and two- or three-dimensional controls in the personal domain. Transitions between the application domain and the personal domain are under control of the user, and the transition method is substantially independent of the navigation in the application domain. For example, the user can fly through a three-dimensional application domain, and always move to the personal domain by moving a cursor near one extreme of the display.

Hierarchy and Interactions in Environmental Interfaces Regarded as Biophysical Complex Systems

Science.gov (United States)

Mihailovic, Dragutin T.; Balaz, Igor

The field of environmental sciences is abundant with various interfaces and is the right place for the application of new fundamental approaches leading towards a better understanding of environmental phenomena. For example, following the definition of environmental interface by Mihailovic and Balaž [23], such interface can be placed between: human or animal bodies and surrounding air, aquatic species and water and air around them, and natural or artificially built surfaces (vegetation, ice, snow, barren soil, water, urban communities) and the atmosphere. Complex environmental interface systems are open and hierarchically organised, interactions between their constituent parts are nonlinear, and the interaction with the surrounding environment is noisy. These systems are therefore very sensitive to initial conditions, deterministic external perturbations and random fluctuations always present in nature. The study of noisy non-equilibrium processes is fundamental for modelling the dynamics of environmental interface systems and for understanding the mechanisms of spatio-temporal pattern formation in contemporary environmental sciences, particularly in environmental fluid mechanics. In modelling complex biophysical systems one of the main tasks is to successfully create an operative interface with the external environment. It should provide a robust and prompt translation of the vast diversity of external physical and/or chemical changes into a set of signals, which are "understandable" for an organism. Although the establishment of organisation in any system is of crucial importance for its functioning, it should not be forgotten that in biophysical systems we deal with real-life problems where a number of other conditions should be reached in order to put the system to work. One of them is the proper supply of the system by the energy. Therefore, we will investigate an aspect of dynamics of energy flow based on the energy balance equation. The energy as well as

EDMS 6: modern and intuitive

CERN Multimedia

Anaïs Schaeffer

2014-01-01

As announced in Bulletin No. 14-15/2014 (see here), a new version of the system used to manage technical data and data concerning CERN equipment (EDMS, Engineering and Equipment Data Management Service) is now available.   A unique interface for all data linked to CERN’s engineering work, EDMS currently stores more than 1.2 million documents containing almost 2 million files, guaranteeing the transfer of protected information and knowledge to future generations of engineers and scientists at CERN, be it the design data and documentation for a specific object (technical specifications, test procedures, non-conformities, drawings, etc.) or technical information about the Laboratory’s infrastructure and scientific equipment. In a few months, the new EDMS 6 system will replace the current system definitively, offering its 13,000 users a more modern and intuitive interface that meets their expectations. “We've been working in close collaboration with some of ...

The Effects of Degraded Digital Instrumentation and Control Systems on Human-system Interfaces and Operator Performance: HFE Review Guidance and Technical Basis

Energy Technology Data Exchange (ETDEWEB)

O' Hara, J.M.; W. Gunther, G. Martinez-Guridi

2010-02-26

New and advanced reactors will use integrated digital instrumentation and control (I&C) systems to support operators in their monitoring and control functions. Even though digital systems are typically highly reliable, their potential for degradation or failure could significantly affect operator performance and, consequently, impact plant safety. The U.S. Nuclear Regulatory Commission (NRC) supported this research project to investigate the effects of degraded I&C systems on human performance and plant operations. The objective was to develop human factors engineering (HFE) review guidance addressing the detection and management of degraded digital I&C conditions by plant operators. We reviewed pertinent standards and guidelines, empirical studies, and plant operating experience. In addition, we conducted an evaluation of the potential effects of selected failure modes of the digital feedwater system on human-system interfaces (HSIs) and operator performance. The results indicated that I&C degradations are prevalent in plants employing digital systems and the overall effects on plant behavior can be significant, such as causing a reactor trip or causing equipment to operate unexpectedly. I&C degradations can impact the HSIs used by operators to monitor and control the plant. For example, sensor degradations can make displays difficult to interpret and can sometimes mislead operators by making it appear that a process disturbance has occurred. We used the information obtained as the technical basis upon which to develop HFE review guidance. The guidance addresses the treatment of degraded I&C conditions as part of the design process and the HSI features and functions that support operators to monitor I&C performance and manage I&C degradations when they occur. In addition, we identified topics for future research.

A direct methodology to establish design requirements for human–system interface (HSI) of automatic systems in nuclear power plants

International Nuclear Information System (INIS)

Anuar, Nuraslinda; Kim, Jonghyun

2014-01-01

Highlights: • A systematic method to identify the design requirements for human–system interface is proposed. • Eight combinations of control agents in each control stage (levels of automation) are defined. • The use of Itemized Sequence Diagram (ISD) is discussed for task allocation to control agents. • The design requirements of human–system interface are established based on the produced ISD. - Abstract: This paper suggests a systematic approach to establish design requirements for the human–system interface (HSI) between operators and automatic systems. The role of automation in the control of a nuclear power plant (NPP) operation is to support the human operator and act as an efficient team player to help reduce the human operator’s workload. Some of the problems related to the interaction between the human operator and automation are out-of-the-loop performance, mode errors, role change to supervisory role and final authority issues. Therefore, the design of HSI is critical to avoiding breakdowns in communication between the human operator and the system. In this paper, the design requirements for human–system interface of automatic systems are constructed with the help of a tool called Itemized Sequence Diagram (ISD). Eight levels of automation (LOA) are initially defined in the function allocation and an ISD is drawn for each of the LOA for task allocation. The ISD is a modified version of sequence diagram, which is widely used in systems engineering as well as software engineering. The ISD elements of arrows, messages, actors and alternative boxes collectively show the interactions between the control agents, which are decomposed into four different roles: information acquiring, plant diagnosing, response selecting and response implementing. Eleven design requirements to optimize the human–automation interaction are suggested by using this method. The design requirements produced from the identified interaction points in the ISD are

Eco-modernism, a third way for tomorrow's energy?

International Nuclear Information System (INIS)

Anon.

2017-01-01

Considering climate warming as an immediate threat for humanity, ecologists from the Eco-modernism movement not only approve but call for the presence of nuclear power in the energy mix. For them nuclear energy is a mature low-carbon energy that can be used to combine all renewable energies more efficiently. NGO like 'Environmental Progress', 'Energy for Humanity' or 'Save the Nukes' back the Eco-modernism movement. The Eco-modernism movement gathers unconventional ecologists who consider that modern technologies by using the eco-system more efficiently than previous technologies did, are a powerful tool to reduce the global impact of humane activities on the biosphere. The Eco-modernism movement is for agricultural intensification, the use of GMO, waste recycling and for increasing urbanization. (A.C.)

Spectrometer user interface to computer systems

International Nuclear Information System (INIS)

Salmon, L.; Davies, M.; Fry, F.A.; Venn, J.B.

1979-01-01

A computer system for use in radiation spectrometry should be designed around the needs and comprehension of the user and his operating environment. To this end, the functions of the system should be built in a modular and independent fashion such that they can be joined to the back end of an appropriate user interface. The point that this interface should be designed rather than just allowed to evolve is illustrated by reference to four related computer systems of differing complexity and function. The physical user interfaces in all cases are keyboard terminals, and the virtues and otherwise of these devices are discussed and compared with others. The language interface needs to satisfy a number of requirements, often conflicting. Among these, simplicity and speed of operation compete with flexibility and scope. Both experienced and novice users need to be considered, and any individual's needs may vary from naive to complex. To be efficient and resilient, the implementation must use an operating system, but the user needs to be protected from its complex and unfamiliar syntax. At the same time the interface must allow the user access to all services appropriate to his needs. The user must also receive an image of privacy in a multi-user system. The interface itself must be stable and exhibit continuity between implementations. Some of these conflicting needs have been overcome by the SABRE interface with languages operating at several levels. The foundation is a simple semimnemonic command language that activates indididual and independent functions. The commands can be used with positional parameters or in an interactive dialogue the precise nature of which depends upon the operating environment and the user's experience. A command procedure or macrolanguage allows combinations of commands with conditional branching and arithmetic features. Thus complex but repetitive operations are easily performed

A novel human-machine interface based on recognition of multi-channel facial bioelectric signals

International Nuclear Information System (INIS)

Razazadeh, Iman Mohammad; Firoozabadi, S. Mohammad; Golpayegani, S.M.R.H.; Hu, H.

2011-01-01

Full text: This paper presents a novel human-machine interface for disabled people to interact with assistive systems for a better quality of life. It is based on multichannel forehead bioelectric signals acquired by placing three pairs of electrodes (physical channels) on the Fron-tails and Temporalis facial muscles. The acquired signals are passes through a parallel filter bank to explore three different sub-bands related to facial electromyogram, electrooculogram and electroencephalogram. The root mean features of the bioelectric signals analyzed within non-overlapping 256 ms windows were extracted. The subtractive fuzzy c-means clustering method (SFCM) was applied to segment the feature space and generate initial fuzzy based Takagi-Sugeno rules. Then, an adaptive neuro-fuzzy inference system is exploited to tune up the premises and consequence parameters of the extracted SFCMs. rules. The average classifier discriminating ratio for eight different facial gestures (smiling, frowning, pulling up left/right lips corner, eye movement to left/right/up/down is between 93.04% and 96.99% according to different combinations and fusions of logical features. Experimental results show that the proposed interface has a high degree of accuracy and robustness for discrimination of 8 fundamental facial gestures. Some potential and further capabilities of our approach in human-machine interfaces are also discussed. (author)

Bacteria, fungi and arthropod pests collected on modern human mummies

Directory of Open Access Journals (Sweden)

F. Palla

2011-08-01

Full Text Available A survey of opportunistic biocenosis (macro and micro organisms associated with a rest of human mummy samples was carried out to characterise the biocenosis and to detect the potential of biodeteriogens. The rests of the human modern mummies come from a hypogeic site. Since mummies are relevant from a historic-artistic-scientific point of view, an aspect of this study was the identification and characterization of the biological systems related with biodeterioration of organic matter. In a first step, different sampling methods, according to the taxa, were applied. Technological procedures were combined in order to have an interdisciplinary approach to the conservation actions for testing future restoration protocols. Specimens were collected, identified and characterized by Microscopy (light, SEM, CLSM and molecular analyses (DNA extraction, in vitro target sequence amplification, sequencing, sequence analysis. The results highlight a rather complex biocenonsis consisting of fungi, cyanobacteria, several insects and other arthropods.

Ayurveda–modern medicine interface: A critical appraisal of studies of Ayurvedic medicines to treat osteoarthritis and rheumatoid arthritis

Science.gov (United States)

Chopra, Arvind; Saluja, Manjit; Tillu, Girish

2010-01-01

The potential of Ayurvedic philosophy and medicines needs to be recognized and converted into real life treatment paradigm. This article describes a comprehensive therapeutic approach used in Ayurveda and modern medicine to treat arthritis. We present concise summary of various controlled drug trials carried out by us to validate standardized Ayurvedic drugs using modern medicine protocol to treat Rheumatoid Arthritis and Osteoarthritis knees. Several of the latter are published. The trials consistently demonstrate excellent safety of Ayurvedic medicines but often fail to unequivocally show superior efficacy. Some key findings of a recently unpublished trial in OA knees are also presented to show equivalence between Ayurvedic medicine and celecoxib and glucosamine, and we speculate that equivalence trials may be a way forward. The data from the trials also supports the Ayurvedic ‘Rasayana’ concept of immune-modulation and healing. We need to interpret logic of Ayurveda when, adopting modern science tools in drug development and validation and much research is required. Validation of Ayurvedic medicines using the latter approach may lead to an evidence based Ayurveda – Modern Medicine interface. Also, in pursuit of finding better treatment solutions, we ought to step beyond the realm of only drugs and attempt validation of comprehensive specific treatment package as per classical Ayurveda. Finally, validation of a combined (Ayurveda and modern medicine) therapeutic approach with superior efficacy and safety is likely to be a major leap in overcoming some of the current frustrations to treat difficult disorders like arthritis using only modern medicines. PMID:21547047

The Johnson Space Center Management Information Systems (JSCMIS): An interface for organizational databases

Science.gov (United States)

Bishop, Peter C.; Erickson, Lloyd

1990-01-01

The Management Information and Decision Support Environment (MIDSE) is a research activity to build and test a prototype of a generic human interface on the Johnson Space Center (JSC) Information Network (CIN). The existing interfaces were developed specifically to support operations rather than the type of data which management could use. The diversity of the many interfaces and their relative difficulty discouraged occasional users from attempting to use them for their purposes. The MIDSE activity approached this problem by designing and building an interface to one JSC data base - the personnel statistics tables of the NASA Personnel and Payroll System (NPPS). The interface was designed against the following requirements: generic (use with any relational NOMAD data base); easy to learn (intuitive operations for new users); easy to use (efficient operations for experienced users); self-documenting (help facility which informs users about the data base structure as well as the operation of the interface); and low maintenance (easy configuration to new applications). A prototype interface entitled the JSC Management Information Systems (JSCMIS) was produced. It resides on CIN/PROFS and is available to JSC management who request it. The interface has passed management review and is ready for early use. Three kinds of data are now available: personnel statistics, personnel register, and plan/actual cost.

Late Pleistocene climate change and the global expansion of anatomically modern humans

Science.gov (United States)

Eriksson, Anders; Betti, Lia; Friend, Andrew D.; Lycett, Stephen J.; Singarayer, Joy S.; von Cramon-Taubadel, Noreen; Valdes, Paul J.; Balloux, Francois; Manica, Andrea

2012-01-01

The extent to which past climate change has dictated the pattern and timing of the out-of-Africa expansion by anatomically modern humans is currently unclear [Stewart JR, Stringer CB (2012) Science 335:1317–1321]. In particular, the incompleteness of the fossil record makes it difficult to quantify the effect of climate. Here, we take a different approach to this problem; rather than relying on the appearance of fossils or archaeological evidence to determine arrival times in different parts of the world, we use patterns of genetic variation in modern human populations to determine the plausibility of past demographic parameters. We develop a spatially explicit model of the expansion of anatomically modern humans and use climate reconstructions over the past 120 ky based on the Hadley Centre global climate model HadCM3 to quantify the possible effects of climate on human demography. The combinations of demographic parameters compatible with the current genetic makeup of worldwide populations indicate a clear effect of climate on past population densities. Our estimates of this effect, based on population genetics, capture the observed relationship between current climate and population density in modern hunter–gatherers worldwide, providing supporting evidence for the realism of our approach. Furthermore, although we did not use any archaeological and anthropological data to inform the model, the arrival times in different continents predicted by our model are also broadly consistent with the fossil and archaeological records. Our framework provides the most accurate spatiotemporal reconstruction of human demographic history available at present and will allow for a greater integration of genetic and archaeological evidence. PMID:22988099

Organization of graphic controls for a state of the art human interface

International Nuclear Information System (INIS)

Speckert, G.C.

1980-01-01

This paper describes a proposed control system organization, based on an existing design for the Lawrence Livermore National Laboratory's Mirror Fusion Test Facility (MFTF). The trend of improving traditional status (output) devices such as lamps, gauges, and other single function status displays by use of computer generated color video displays in modern supervisory control environments has been extended to include control (input) devices. For MFTF, the usual arrays of knobs, switches, and physical buttons have been almost entirely replaced by graphic images of buttons which are displayed on color monitors equipped with curved transparent touchsensors. The light touch of a finger brings the operator the desired set of controls, requests a particular status display, or issues a command to the system being controlled, while banks of status monitors dynamically display his changing world. Because the operator can only interact with a portion of the total controls at any one time, the organization of these controls is critical for optimization of the man-machine interface

The Human-Robot Interaction Operating System

Science.gov (United States)

Fong, Terrence; Kunz, Clayton; Hiatt, Laura M.; Bugajska, Magda

2006-01-01

In order for humans and robots to work effectively together, they need to be able to converse about abilities, goals and achievements. Thus, we are developing an interaction infrastructure called the "Human-Robot Interaction Operating System" (HRI/OS). The HRI/OS provides a structured software framework for building human-robot teams, supports a variety of user interfaces, enables humans and robots to engage in task-oriented dialogue, and facilitates integration of robots through an extensible API.

Modeling soft interface dominated systems

NARCIS (Netherlands)

Lamorgese, A.; Mauri, R.; Sagis, L.M.C.

2017-01-01

The two main continuum frameworks used for modeling the dynamics of soft multiphase systems are the Gibbs dividing surface model, and the diffuse interface model. In the former the interface is modeled as a two dimensional surface, and excess properties such as a surface density, or surface energy

Knowledge-based support for design and operational use of human-machine interfaces

International Nuclear Information System (INIS)

Johannsen, G.

1994-01-01

The possibilities for knowledge support of different human user classes, namely operators, operational engineers and designers of human-machine interfaces, are discussed. Several human-machine interface functionalities are briefly explained. The paper deals with such questions as which type of knowledge is needed for design and operation, how to represent it, where to get it from, how to process it, and how to consider and use it. The relationships between design and operational use are thereby emphasised. (author)

Studying Innovation Technologies in Modern Education

Science.gov (United States)

Stukalenko, Nina M.; Zhakhina, Bariya B.; Kukubaeva, Asiya K.; Smagulova, Nurgul K.; Kazhibaeva, Gulden K.

2016-01-01

In modern society, innovation technologies expand to almost every field of human activity, including such wide field as education. Due to integrating innovation technologies into the educational process practice, this phenomenon gained special significance within improvement and modernization of the established educational system. Currently, the…

Physical interface dynamics alter how robotic exosuits augment human movement: implications for optimizing wearable assistive devices.

Science.gov (United States)

Yandell, Matthew B; Quinlivan, Brendan T; Popov, Dmitry; Walsh, Conor; Zelik, Karl E

2017-05-18

Wearable assistive devices have demonstrated the potential to improve mobility outcomes for individuals with disabilities, and to augment healthy human performance; however, these benefits depend on how effectively power is transmitted from the device to the human user. Quantifying and understanding this power transmission is challenging due to complex human-device interface dynamics that occur as biological tissues and physical interface materials deform and displace under load, absorbing and returning power. Here we introduce a new methodology for quickly estimating interface power dynamics during movement tasks using common motion capture and force measurements, and then apply this method to quantify how a soft robotic ankle exosuit interacts with and transfers power to the human body during walking. We partition exosuit end-effector power (i.e., power output from the device) into power that augments ankle plantarflexion (termed augmentation power) vs. power that goes into deformation and motion of interface materials and underlying soft tissues (termed interface power). We provide empirical evidence of how human-exosuit interfaces absorb and return energy, reshaping exosuit-to-human power flow and resulting in three key consequences: (i) During exosuit loading (as applied forces increased), about 55% of exosuit end-effector power was absorbed into the interfaces. (ii) However, during subsequent exosuit unloading (as applied forces decreased) most of the absorbed interface power was returned viscoelastically. Consequently, the majority (about 75%) of exosuit end-effector work over each stride contributed to augmenting ankle plantarflexion. (iii) Ankle augmentation power (and work) was delayed relative to exosuit end-effector power, due to these interface energy absorption and return dynamics. Our findings elucidate the complexities of human-exosuit interface dynamics during transmission of power from assistive devices to the human body, and provide insight into

Distributed control system for CANDU 9 nuclear power plant

International Nuclear Information System (INIS)

Harber, J.E.; Kattan, M.K.; Macbeth, M.J.

1996-01-01

Canadian designed CANDU pressurized heavy water nuclear reactors have been world leaders in electrical power generation. The CANDU 9 project is AECL's next reactor design. The CANDU 9 plant monitoring, annunciation, and control functions are implemented in two evolutionary systems; the distributed control system (DCS) and the plant display system (PDS). The CDS implements most of the plant control functions in a single hardware platform. The DCS communicates with the PDS to provide the main operator interface and annunciation capabilities of the previous control computer designs along with human interface enhancements required in a modern control system. (author)

Formal Modeling and Reconfiguration of User Interfaces for Reduction of Errors in Failure Handling of Complex Systems

NARCIS (Netherlands)

Weyers, Benjamin; Burkolter, Dina; Luther, Wolfram; Kluge, Annette

2012-01-01

Controlling and observing complex systems is central to the study of human-machine interaction. In our understanding, there is much to be gained from integrating formal modeling and analysis, including the reconfiguration of user interfaces, with the development of user interfaces with high

APPLYING ARTIFICIAL INTELLIGENCE TECHNIQUES TO HUMAN-COMPUTER INTERFACES

DEFF Research Database (Denmark)

Sonnenwald, Diane H.

1988-01-01

A description is given of UIMS (User Interface Management System), a system using a variety of artificial intelligence techniques to build knowledge-based user interfaces combining functionality and information from a variety of computer systems that maintain, test, and configure customer telephone...... and data networks. Three artificial intelligence (AI) techniques used in UIMS are discussed, namely, frame representation, object-oriented programming languages, and rule-based systems. The UIMS architecture is presented, and the structure of the UIMS is explained in terms of the AI techniques....

Cognitive Awareness Prototype Development on User Interface Design

Science.gov (United States)

Rosli, D'oria Islamiah

2015-01-01

Human error is a crucial problem in manufacturing industries. Due to the misinterpretation of information on interface system design, accidents or death may occur at workplace. Lack of human cognition criteria in interface system design is also one of the contributions to the failure in using the system effectively. Therefore, this paper describes…

Origin of clothing lice indicates early clothing use by anatomically modern humans in Africa.

Science.gov (United States)

Toups, Melissa A; Kitchen, Andrew; Light, Jessica E; Reed, David L

2011-01-01

Clothing use is an important modern behavior that contributed to the successful expansion of humans into higher latitudes and cold climates. Previous research suggests that clothing use originated anywhere between 40,000 and 3 Ma, though there is little direct archaeological, fossil, or genetic evidence to support more specific estimates. Since clothing lice evolved from head louse ancestors once humans adopted clothing, dating the emergence of clothing lice may provide more specific estimates of the origin of clothing use. Here, we use a Bayesian coalescent modeling approach to estimate that clothing lice diverged from head louse ancestors at least by 83,000 and possibly as early as 170,000 years ago. Our analysis suggests that the use of clothing likely originated with anatomically modern humans in Africa and reinforces a broad trend of modern human developments in Africa during the Middle to Late Pleistocene.

Personalized keystroke dynamics for self-powered human--machine interfacing.

Science.gov (United States)

Chen, Jun; Zhu, Guang; Yang, Jin; Jing, Qingshen; Bai, Peng; Yang, Weiqing; Qi, Xuewei; Su, Yuanjie; Wang, Zhong Lin

2015-01-27

The computer keyboard is one of the most common, reliable, accessible, and effective tools used for human--machine interfacing and information exchange. Although keyboards have been used for hundreds of years for advancing human civilization, studying human behavior by keystroke dynamics using smart keyboards remains a great challenge. Here we report a self-powered, non-mechanical-punching keyboard enabled by contact electrification between human fingers and keys, which converts mechanical stimuli applied to the keyboard into local electronic signals without applying an external power. The intelligent keyboard (IKB) can not only sensitively trigger a wireless alarm system once gentle finger tapping occurs but also trace and record typed content by detecting both the dynamic time intervals between and during the inputting of letters and the force used for each typing action. Such features hold promise for its use as a smart security system that can realize detection, alert, recording, and identification. Moreover, the IKB is able to identify personal characteristics from different individuals, assisted by the behavioral biometric of keystroke dynamics. Furthermore, the IKB can effectively harness typing motions for electricity to charge commercial electronics at arbitrary typing speeds greater than 100 characters per min. Given the above features, the IKB can be potentially applied not only to self-powered electronics but also to artificial intelligence, cyber security, and computer or network access control.

Five Indisputable Facts on Modern Power Systems

Energy Technology Data Exchange (ETDEWEB)

Bloom, Aaron P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brinkman, Gregory L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Lopez, Anthony J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Holttinen, Hannele [VTT Technical Research Centre of Finland; Helman, Udi [Helman Analytics; Summers, Kate [Pacific Hydro; Bakke, Jordan [Midcontinent Independent System Operator

2017-08-01

This presentation overviews five indisputable facts about modern power systems: Fact one: The grid can handle more renewable generation than previously thought. Fact two: Geographic and resource diversity provide additional reliability to the system. Fact three: Wind and solar forecasting provide significant value. Fact four: Our electric power markets were not originally designed for variable renewables -- but they could be adapted. Fact five: Modern power electronics are creating new sources of essential reliability services.

Human-Automation Interaction Design for Adaptive Cruise Control Systems of Ground Vehicles

Directory of Open Access Journals (Sweden)

Hwisoo Eom

2015-06-01

Full Text Available A majority of recently developed advanced vehicles have been equipped with various automated driver assistance systems, such as adaptive cruise control (ACC and lane keeping assistance systems. ACC systems have several operational modes, and drivers can be unaware of the mode in which they are operating. Because mode confusion is a significant human error factor that contributes to traffic accidents, it is necessary to develop user interfaces for ACC systems that can reduce mode confusion. To meet this requirement, this paper presents a new human-automation interaction design methodology in which the compatibility of the machine and interface models is determined using the proposed criteria, and if the models are incompatible, one or both of the models is/are modified to make them compatible. To investigate the effectiveness of our methodology, we designed two new interfaces by separately modifying the machine model and the interface model and then performed driver-in-the-loop experiments. The results showed that modifying the machine model provides a more compact, acceptable, effective, and safe interface than modifying the interface model.

Human-Automation Interaction Design for Adaptive Cruise Control Systems of Ground Vehicles.

Science.gov (United States)

Eom, Hwisoo; Lee, Sang Hun

2015-06-12

A majority of recently developed advanced vehicles have been equipped with various automated driver assistance systems, such as adaptive cruise control (ACC) and lane keeping assistance systems. ACC systems have several operational modes, and drivers can be unaware of the mode in which they are operating. Because mode confusion is a significant human error factor that contributes to traffic accidents, it is necessary to develop user interfaces for ACC systems that can reduce mode confusion. To meet this requirement, this paper presents a new human-automation interaction design methodology in which the compatibility of the machine and interface models is determined using the proposed criteria, and if the models are incompatible, one or both of the models is/are modified to make them compatible. To investigate the effectiveness of our methodology, we designed two new interfaces by separately modifying the machine model and the interface model and then performed driver-in-the-loop experiments. The results showed that modifying the machine model provides a more compact, acceptable, effective, and safe interface than modifying the interface model.

A wireless transmission neural interface system for unconstrained non-human primates.

Science.gov (United States)

Fernandez-Leon, Jose A; Parajuli, Arun; Franklin, Robert; Sorenson, Michael; Felleman, Daniel J; Hansen, Bryan J; Hu, Ming; Dragoi, Valentin

2015-10-01

Studying the brain in large animal models in a restrained laboratory rig severely limits our capacity to examine brain circuits in experimental and clinical applications. To overcome these limitations, we developed a high-fidelity 96-channel wireless system to record extracellular spikes and local field potentials from the neocortex. A removable, external case of the wireless device is attached to a titanium pedestal placed in the animal skull. Broadband neural signals are amplified, multiplexed, and continuously transmitted as TCP/IP data at a sustained rate of 24 Mbps. A Xilinx Spartan 6 FPGA assembles the digital signals into serial data frames for transmission at 20 kHz though an 802.11n wireless data link on a frequency-shift key-modulated signal at 5.7-5.8 GHz to a receiver up to 10 m away. The system is powered by two CR123A, 3 V batteries for 2 h of operation. We implanted a multi-electrode array in visual area V4 of one anesthetized monkey (Macaca fascicularis) and in the dorsolateral prefrontal cortex (dlPFC) of a freely moving monkey (Macaca mulatta). The implanted recording arrays were electrically stable and delivered broadband neural data over a year of testing. For the first time, we compared dlPFC neuronal responses to the same set of stimuli (food reward) in restrained and freely moving conditions. Although we did not find differences in neuronal responses as a function of reward type in the restrained and unrestrained conditions, there were significant differences in correlated activity. This demonstrates that measuring neural responses in freely moving animals can capture phenomena that are absent in the traditional head-fixed paradigm. We implemented a wireless neural interface for multi-electrode recordings in freely moving non-human primates, which can potentially move systems neuroscience to a new direction by allowing one to record neural signals while animals interact with their environment.

A wireless transmission neural interface system for unconstrained non-human primates

Science.gov (United States)

Fernandez-Leon, Jose A.; Parajuli, Arun; Franklin, Robert; Sorenson, Michael; Felleman, Daniel J.; Hansen, Bryan J.; Hu, Ming; Dragoi, Valentin

2015-10-01

Objective. Studying the brain in large animal models in a restrained laboratory rig severely limits our capacity to examine brain circuits in experimental and clinical applications. Approach. To overcome these limitations, we developed a high-fidelity 96-channel wireless system to record extracellular spikes and local field potentials from the neocortex. A removable, external case of the wireless device is attached to a titanium pedestal placed in the animal skull. Broadband neural signals are amplified, multiplexed, and continuously transmitted as TCP/IP data at a sustained rate of 24 Mbps. A Xilinx Spartan 6 FPGA assembles the digital signals into serial data frames for transmission at 20 kHz though an 802.11n wireless data link on a frequency-shift key-modulated signal at 5.7-5.8 GHz to a receiver up to 10 m away. The system is powered by two CR123A, 3 V batteries for 2 h of operation. Main results. We implanted a multi-electrode array in visual area V4 of one anesthetized monkey (Macaca fascicularis) and in the dorsolateral prefrontal cortex (dlPFC) of a freely moving monkey (Macaca mulatta). The implanted recording arrays were electrically stable and delivered broadband neural data over a year of testing. For the first time, we compared dlPFC neuronal responses to the same set of stimuli (food reward) in restrained and freely moving conditions. Although we did not find differences in neuronal responses as a function of reward type in the restrained and unrestrained conditions, there were significant differences in correlated activity. This demonstrates that measuring neural responses in freely moving animals can capture phenomena that are absent in the traditional head-fixed paradigm. Significance. We implemented a wireless neural interface for multi-electrode recordings in freely moving non-human primates, which can potentially move systems neuroscience to a new direction by allowing one to record neural signals while animals interact with their environment.

Modernization of the Ukrainian NPP instrumentation and control systems

International Nuclear Information System (INIS)

Yastrebenetsky, M.

1998-01-01

Modernization of many instrumentation and control systems for all type of reactors is under way now in Ukraine. Main principles of modernization, standards that are used for modernization are described in the report. (author)

PC-AT to gamma camera interface Anugami-S

International Nuclear Information System (INIS)

Bhattacharya, Sadhana; Sonalkar, S.Y.; Kataria, S.K.

2000-01-01

The gamma camera interface ANUGAMI-S is an image acquisition system used in nuclear medicine centres and hospitals. The state of the art design of the interface provides quality improvement in addition to image acquisition, by applying on-line uniformity correction which is very essential for gamma camera applications in nuclear medicine. The improvement in the quality of the image has been achieved by image acquisition in positionally varying and sliding energy window. It supports all acquisition modes viz. static, dynamic and gated acquisition modes with and without uniformity correction. The user interface provides the acquisition in various user selectable parameters with image display and related acquisition parameter display. It is a universal system which provides a modern, cost effective and easily maintainable solution for interfacing any gamma camera to PC or upgradation of analog gamma camera. The paper describes the system details and gated acquisition achieved on the present system. (author)

Development of effective tool for iterative design of human machine interfaces in nuclear power plant

International Nuclear Information System (INIS)

Nakagawa, Takashi; Matsuo, Satoko; Yoshikawa, Hidekazu; Wu, Wei; Kameda, Akiyuki; Fumizawa, Motoo

2000-01-01

The authors have developed SEAMAID, which is a Simulation-based Evaluation and Analysis support system for MAn-machine Interface Design (SEAMAID) in the domain of nuclear power plants. The SEAMAID simulated the interaction between an operator and human machine interfaces (HMI), and supports to evaluate the HMI by using the simulation results. In this paper, a case study of evaluation for conventional center control room design was conducted. The authors were confirmed that SEAMAID is a useful tool for improvements of HMI design (J.P.N.)

Software and Human-Machine Interface Development for Environmental Controls Subsystem Support

Science.gov (United States)

Dobson, Matthew

2018-01-01

The Space Launch System (SLS) is the next premier launch vehicle for NASA. It is the next stage of manned space exploration from American soil, and will be the platform in which we push further beyond Earth orbit. In preparation of the SLS maiden voyage on Exploration Mission 1 (EM-1), the existing ground support architecture at Kennedy Space Center required significant overhaul and updating. A comprehensive upgrade of controls systems was necessary, including programmable logic controller software, as well as Launch Control Center (LCC) firing room and local launch pad displays for technician use. Environmental control acts as an integral component in these systems, being the foremost system for conditioning the pad and extremely sensitive launch vehicle until T-0. The Environmental Controls Subsystem (ECS) required testing and modification to meet the requirements of the designed system, as well as the human factors requirements of NASA software for Validation and Verification (V&V). This term saw significant strides in the progress and functionality of the human-machine interfaces used at the launch pad, and improved integration with the controller code.

Optimal design method for a digital human–computer interface based on human reliability in a nuclear power plant. Part 3: Optimization method for interface task layout

International Nuclear Information System (INIS)

Jiang, Jianjun; Wang, Yiqun; Zhang, Li; Xie, Tian; Li, Min; Peng, Yuyuan; Wu, Daqing; Li, Peiyao; Ma, Congmin; Shen, Mengxu; Wu, Xing; Weng, Mengyun; Wang, Shiwei; Xie, Cen

2016-01-01

Highlights: • The authors present an optimization algorithm for interface task layout. • The performing process of the proposed algorithm was depicted. • The performance evaluation method adopted neural network method. • The optimization layouts of an event interface tasks were obtained by experiments. - Abstract: This is the last in a series of papers describing the optimal design for a digital human–computer interface of a nuclear power plant (NPP) from three different points based on human reliability. The purpose of this series is to propose different optimization methods from varying perspectives to decrease human factor events that arise from the defects of a human–computer interface. The present paper mainly solves the optimization method as to how to effectively layout interface tasks into different screens. The purpose of this paper is to decrease human errors by reducing the distance that an operator moves among different screens in each operation. In order to resolve the problem, the authors propose an optimization process of interface task layout for digital human–computer interface of a NPP. As to how to automatically layout each interface task into one of screens in each operation, the paper presents a shortest moving path optimization algorithm with dynamic flag based on human reliability. To test the algorithm performance, the evaluation method uses neural network based on human reliability. The less the human error probabilities are, the better the interface task layouts among different screens are. Thus, by analyzing the performance of each interface task layout, the optimization result is obtained. Finally, the optimization layouts of spurious safety injection event interface tasks of the NPP are obtained by an experiment, the proposed methods has a good accuracy and stabilization.

Transfer of physics detector models into CAD systems using modern techniques

International Nuclear Information System (INIS)

Dach, M.; Vuoskoski, J.

1996-01-01

Designing high energy physics detectors for future experiments requires sophisticated computer aided design and simulation tools. In order to satisfy the future demands in this domain, modern techniques, methods, and standards have to be applied. We present an interface application, designed and implemented using object-oriented techniques, for the widely used GEANT physics simulation package. It converts GEANT detector models into the future industrial standard, STEP. (orig.)

The Effects of Degraded Digital Instrumentation and Control Systems on Human-system Interfaces and Operator Performance: HFE Review Guidance and Technical Basis

International Nuclear Information System (INIS)

O'Hara, J.M.; Gunther, W.; Martinez-Guridi, G.

2010-01-01

New and advanced reactors will use integrated digital instrumentation and control (I and C) systems to support operators in their monitoring and control functions. Even though digital systems are typically highly reliable, their potential for degradation or failure could significantly affect operator performance and, consequently, impact plant safety. The U.S. Nuclear Regulatory Commission (NRC) supported this research project to investigate the effects of degraded I and C systems on human performance and plant operations. The objective was to develop human factors engineering (HFE) review guidance addressing the detection and management of degraded digital I and C conditions by plant operators. We reviewed pertinent standards and guidelines, empirical studies, and plant operating experience. In addition, we conducted an evaluation of the potential effects of selected failure modes of the digital feedwater system on human-system interfaces (HSIs) and operator performance. The results indicated that I and C degradations are prevalent in plants employing digital systems and the overall effects on plant behavior can be significant, such as causing a reactor trip or causing equipment to operate unexpectedly. I and C degradations can impact the HSIs used by operators to monitor and control the plant. For example, sensor degradations can make displays difficult to interpret and can sometimes mislead operators by making it appear that a process disturbance has occurred. We used the information obtained as the technical basis upon which to develop HFE review guidance. The guidance addresses the treatment of degraded I and C conditions as part of the design process and the HSI features and functions that support operators to monitor I and C performance and manage I and C degradations when they occur. In addition, we identified topics for future research.

Man-machine interface systems for the Sizewell B Nuclear Power Station

International Nuclear Information System (INIS)

Boettcher, D.B.

2004-01-01

Sizewell B is the first nuclear power station to be built in the United Kingdom using the Pressurised Water Reactor or PWR system. The design is based on stations operating in the United States, but many changes and new features have been introduced to bring it up to date, and to meet United Kingdom practice and regulatory requirements. The Man-Machine Interfaces (MMIs) in the control rooms have been newly designed from first principles, with special attention paid to human factors and the role of the operators. The instrumentation and control (1 and C) systems which interface the MMIs to the process plant, and automate the operation of the station, use advanced technology to achieve high performance and availability. This paper describes the development of the control rooms and 1 and C systems, explaining the thinking that lay behind the principal decisions. (author)

Docosahexaenoic Acid (DHA: An Ancient Nutrient for the Modern Human Brain

Directory of Open Access Journals (Sweden)

Joanne Bradbury

2011-05-01

Full Text Available Modern humans have evolved with a staple source of preformed docosahexaenoic acid (DHA in the diet. An important turning point in human evolution was the discovery of high-quality, easily digested nutrients from coastal seafood and inland freshwater sources. Multi-generational exploitation of seafood by shore-based dwellers coincided with the rapid expansion of grey matter in the cerebral cortex, which characterizes the modern human brain. The DHA molecule has unique structural properties that appear to provide optimal conditions for a wide range of cell membrane functions. This has particular implications for grey matter, which is membrane-rich tissue. An important metabolic role for DHA has recently been identified as the precursor for resolvins and protectins. The rudimentary source of DHA is marine algae; therefore it is found concentrated in fish and marine oils. Unlike the photosynthetic cells in algae and higher plants, mammalian cells lack the specific enzymes required for the de novo synthesis of alpha-linolenic acid (ALA, the precursor for all omega-3 fatty acid syntheses. Endogenous synthesis of DHA from ALA in humans is much lower and more limited than previously assumed. The excessive consumption of omega-6 fatty acids in the modern Western diet further displaces DHA from membrane phospholipids. An emerging body of research is exploring a unique role for DHA in neurodevelopment and the prevention of neuropsychiatric and neurodegenerative disorders. DHA is increasingly being added back into the food supply as fish oil or algal oil supplementation.

Docosahexaenoic acid (DHA): an ancient nutrient for the modern human brain.

Science.gov (United States)

Bradbury, Joanne

2011-05-01

Modern humans have evolved with a staple source of preformed docosahexaenoic acid (DHA) in the diet. An important turning point in human evolution was the discovery of high-quality, easily digested nutrients from coastal seafood and inland freshwater sources. Multi-generational exploitation of seafood by shore-based dwellers coincided with the rapid expansion of grey matter in the cerebral cortex, which characterizes the modern human brain. The DHA molecule has unique structural properties that appear to provide optimal conditions for a wide range of cell membrane functions. This has particular implications for grey matter, which is membrane-rich tissue. An important metabolic role for DHA has recently been identified as the precursor for resolvins and protectins. The rudimentary source of DHA is marine algae; therefore it is found concentrated in fish and marine oils. Unlike the photosynthetic cells in algae and higher plants, mammalian cells lack the specific enzymes required for the de novo synthesis of alpha-linolenic acid (ALA), the precursor for all omega-3 fatty acid syntheses. Endogenous synthesis of DHA from ALA in humans is much lower and more limited than previously assumed. The excessive consumption of omega-6 fatty acids in the modern Western diet further displaces DHA from membrane phospholipids. An emerging body of research is exploring a unique role for DHA in neurodevelopment and the prevention of neuropsychiatric and neurodegenerative disorders. DHA is increasingly being added back into the food supply as fish oil or algal oil supplementation.

Low-Cost Implementation of a Named Entity Recognition System for Voice-Activated Human-Appliance Interfaces in a Smart Home

Directory of Open Access Journals (Sweden)

Geonwoo Park

2018-02-01

Full Text Available When we develop voice-activated human-appliance interface systems in smart homes, named entity recognition (NER is an essential tool for extracting execution targets from natural language commands. Previous studies on NER systems generally include supervised machine-learning methods that require a substantial amount of human-annotated training corpus. In the smart home environment, categories of named entities should be defined according to voice-activated devices (e.g., food names for refrigerators and song titles for music players. The previous machine-learning methods make it difficult to change categories of named entities because a large amount of the training corpus should be newly constructed by hand. To address this problem, we present a semi-supervised NER system to minimize the time-consuming and labor-intensive task of constructing the training corpus. Our system uses distant supervision methods with two kinds of auto-labeling processes: auto-labeling based on heuristic rules for single-class named entity corpus generation and auto-labeling based on a pre-trained single-class NER model for multi-class named entity corpus generation. Then, our system improves NER accuracy by using a bagging-based active learning method. In our experiments that included a generic domain that featured 11 named entity classes and a context-specific domain about baseball that featured 21 named entity classes, our system demonstrated good performances in both domains, with F1-measures of 0.777 and 0.958, respectively. Since our system was built from a relatively small human-annotated training corpus, we believe it is a viable alternative to current NER systems in smart home environments.

A Prototyping Environment for Research on Human-Machine Interfaces in Process Control: Use of Microsoft WPF for Microworld and Distributed Control System Development

Energy Technology Data Exchange (ETDEWEB)

Roger Lew; Ronald L. Boring; Thomas A. Ulrich

2014-08-01

Operators of critical processes, such as nuclear power production, must contend with highly complex systems, procedures, and regulations. Developing human-machine interfaces (HMIs) that better support operators is a high priority for ensuring the safe and reliable operation of critical processes. Human factors engineering (HFE) provides a rich and mature set of tools for evaluating the performance of HMIs, but the set of tools for developing and designing HMIs is still in its infancy. Here we propose that Microsoft Windows Presentation Foundation (WPF) is well suited for many roles in the research and development of HMIs for process control.

Generating User Interfaces with the FUSE-System

OpenAIRE

Frank Lonczewski; Siegfried Schreiber

2017-01-01

With the FUSE(Formal User interface Specification Environment)-System we present a methodology and a set of integrated tools for the automatic generation of graphical user interfaces. FUSE provides tool-based support for all phases (task-, user-, problem domain analysis, design of the logical user interface, design of user interface in a particular layout style) of the user interface development process. Based on a formal specification of dialogue- and layout guidelines, FUSE allows the autom...

Managing modernization of nuclear power plant instrumentation and control systems

International Nuclear Information System (INIS)

2004-02-01

There are many reasons why I and C systems need to be modernized in nuclear power plants, including obsolescence, results of aging technology, failure rates, and the need for additional functionality and improved performance. For many plants, Instrumentation and Control (I and C) modernization will be one of the largest and most important activities over the next decade or longer. Modernization of I and C systems will represent a major capital investment for the plants in the future. Therefore, good and informed management to determine what needs to be modernized, how it should be modernized, and then to do the actual modernization is essential in order to minimize the costs and maximize the benefits. While many reports have discussed I and C modernization topics, one topic that needs more work is how to management I and C modernization projects efficiently. In order to have an efficient modernization project, it is essential that the plant does strategic planning to determine what needs to be done with I and C systems in the context of the overall plant goals, objectives, and commitments. This includes determining what features the the overall I and C, and control room, of the plant should look like at the end of the time period considered by the strategic planning effort, what systems need to be modernized, what systems can be maintained, the priority order of the systems to be modernized, how the systems should be modernized, and so on. To ensure that the individual I and C and control room modernization projects are done consistently with the strategic plan and the overall plant goals, objectives, and commitments, it is important that management establishes a set of plant specific guidelines and generic requirements and processes that the project will need to follow and that can be used as part of the requirements specifications for the new systems. High level management leadership and support is needed for I and C modernization in order to maintain the high

Managing modernization of nuclear power plant instrumentation and control systems

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-02-01

There are many reasons why I and C systems need to be modernized in nuclear power plants, including obsolescence, results of aging technology, failure rates, and the need for additional functionality and improved performance. For many plants, Instrumentation and Control (I and C) modernization will be one of the largest and most important activities over the next decade or longer. Modernization of I and C systems will represent a major capital investment for the plants in the future. Therefore, good and informed management to determine what needs to be modernized, how it should be modernized, and then to do the actual modernization is essential in order to minimize the costs and maximize the benefits. While many reports have discussed I and C modernization topics, one topic that needs more work is how to management I and C modernization projects efficiently. In order to have an efficient modernization project, it is essential that the plant does strategic planning to determine what needs to be done with I and C systems in the context of the overall plant goals, objectives, and commitments. This includes determining what features the the overall I and C, and control room, of the plant should look like at the end of the time period considered by the strategic planning effort, what systems need to be modernized, what systems can be maintained, the priority order of the systems to be modernized, how the systems should be modernized, and so on. To ensure that the individual I and C and control room modernization projects are done consistently with the strategic plan and the overall plant goals, objectives, and commitments, it is important that management establishes a set of plant specific guidelines and generic requirements and processes that the project will need to follow and that can be used as part of the requirements specifications for the new systems. High level management leadership and support is needed for I and C modernization in order to maintain the high

Interfacing industrial process control systems to LEP/LHC

International Nuclear Information System (INIS)

Rabany, M.

1992-01-01

Modern industrial process control systems have developed to meet the needs of industry to increase the production while decreasing the costs. Although particle accelerators designers have pioneered in control systems during the seventies, it has now become possible to them to profit of industrial solutions in substitution of, or in complement with the more traditional home made ones. Adapting and integrating such industrial systems to the accelerator control area will certainly benefit to the field in terms of finance, human resources and technical facilities offered off-the-shelf by the widely experienced industrial controls community; however this cannot be done without slightly affecting the overall accelerator control architecture. The paper briefly describes the industrial controls arena and takes example on an industrial process control system recently installed at CERN to discuss in detail the related choices and issues. (author)

The effect of human-mattress interface's temperature on perceived thermal comfort.

Science.gov (United States)

Califano, R; Naddeo, A; Vink, P

2017-01-01

In recent years, methods that allow for an objective evaluation of perceived comfort, in terms of postural, physiological, cognitive and environmental comfort, have received a great deal of attention from researchers. This paper focuses on one of the factors that influences physiological comfort perception: the temperature difference between users and the objects with which they interact. The first aim is to create a measuring system that does not affect the perceived comfort during the temperatures' acquisition. The main aim is to evaluate how the temperature at the human-mattress interface can affect the level of perceived comfort. A foam mattress has been used for testing in order to take into account the entire back part of the human body. The temperature at the interface was registered by fourteen 100 Ohm Platinum RTDs (Resistance Temperature Detectors) placed on the mattress under the trunk, the shoulders, the buttocks, the legs, the thighs, the arms and the forearms of the test subject. 29 subjects participated in a comfort test in a humidity controlled environment. The test protocol involved: dress-code, anthropometric-based positioning on mattress, environment temperature measuring and an acclimatization time before the test. At the end of each test, each of the test subject's thermal sensations and the level of comfort perception were evaluated using the ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers) scale. The data analyses concerned, in the first instance, correlations between the temperature at the interface and comfort levels of the different parts of the body. Then the same analyses were performed independently of the body parts being considered. The results demonstrated that there was no strong correlation among the studied variables and that the total increase of temperature at interface is associated with a reduction in comfort. Copyright © 2016 Elsevier Ltd. All rights reserved.

Federating resources of information systems: browsing interface (FRISBI)

NARCIS (Netherlands)

Malchanau, A.V.; van der Vet, P.E.; Roosendaal, Hans E.; de Bra, P.M.E.

2003-01-01

Designing the user interface of a federated system (what we call a browsing interface) must consider the knowledge gap that exists between desires of the users and the needs the systems are built to support. The concept of Habitable Interfaces aims to bridge the knowledge gap by providing kinds of

Some Human Factors Considerations for Designing Mixed Reality Interfaces

National Research Council Canada - National Science Library

Milgram, Paul

2006-01-01

...), as well as the case of Augmented Virtuality (AV). In designing human-machine interfaces for mixed reality applications, a number of considerations are discussed which may potentially impact the effectiveness of the design...

The Driving Forces of Cultural Complexity : Neanderthals, Modern Humans, and the Question of Population Size.

Science.gov (United States)

Fogarty, Laurel; Wakano, Joe Yuichiro; Feldman, Marcus W; Aoki, Kenichi

2017-03-01

The forces driving cultural accumulation in human populations, both modern and ancient, are hotly debated. Did genetic, demographic, or cognitive features of behaviorally modern humans (as opposed to, say, early modern humans or Neanderthals) allow culture to accumulate to its current, unprecedented levels of complexity? Theoretical explanations for patterns of accumulation often invoke demographic factors such as population size or density, whereas statistical analyses of variation in cultural complexity often point to the importance of environmental factors such as food stability, in determining cultural complexity. Here we use both an analytical model and an agent-based simulation model to show that a full understanding of the emergence of behavioral modernity, and the cultural evolution that has followed, depends on understanding and untangling the complex relationships among culture, genetically determined cognitive ability, and demographic history. For example, we show that a small but growing population could have a different number of cultural traits from a shrinking population with the same absolute number of individuals in some circumstances.

Applying Cognitive Psychology to User Interfaces

Science.gov (United States)

Durrani, Sabeen; Durrani, Qaiser S.

This paper explores some key aspects of cognitive psychology that may be mapped onto user interfaces. Major focus in existing user interface guidelines is on consistency, simplicity, feedback, system messages, display issues, navigation, colors, graphics, visibility and error prevention [8-10]. These guidelines are effective indesigning user interfaces. However, these guidelines do not handle the issues that may arise due to the innate structure of human brain and human limitations. For example, where to place graphics on the screen so that user can easily process them and what kind of background should be given on the screen according to the limitation of human motor system. In this paper we have collected some available guidelines from the area of cognitive psychology [1, 5, 7]. In addition, we have extracted few guidelines from theories and studies of cognitive psychology [3, 11] which may be mapped to user interfaces.

A Critique on the Effectiveness of Current Human Reliability Analysis Approach for the Human-Machine Interface Design in Nuclear Power Plants

International Nuclear Information System (INIS)

Lee, Yong Hee

2010-01-01

Human Reliability Analysis (HRA) in cooperation of PSA has been conducted to evaluate the safety of a system and the validity of a system design. HRA has been believed to provide a quantitative value of human error potential and the safety level of a design alternative in Nuclear Power Plants (NPPs). However, it becomes doubtful that current HRA is worth to conduct to evaluate the human factors of NPP design, since there have been many critiques upon the virtue of HRA. Inevitably, the newer the technology becomes, the larger endeavors bound for the new facilitated methods. This paper describes the limitations and the obsolescence of the current HRA, especially for the design evaluation of Human-Machine Interface (HMI) utilizing the recent digital technologies. An alternative approach to the assessment of the human error potential of HMI design is proposed

The Human Factors System of VGB. The body of measures implemented by the NPP operating companies for HF management and optimisation of the man-machine interface

International Nuclear Information System (INIS)

Eisgruber, H.; Janssen, G.

1999-01-01

One way of ensuring high human reliability is to systematically record, analyse and optimise the identified human factors influencing the safety of operation of NPPs. There are two kinds of human factors to be considered: Those identified and characterised in their actual influence on the man-machine system after an event has happened, and the potential human factors, as far as they are known. The purpose of the paper presented is to: - explain the man-machine interface on the basis of the descriptions delivered by work science, as well as with the information model (acquisition, processing and application of information); - explain their influence on the human performance; - identify the organisational units/competences of a nuclear power plant with respect to responsibility for dealing with those factors influencing human performance; - describe suitable joint action of the responsible organisational units; - present results of HF system reviews and modifications. (orig./CB) [de

From fish to modern humans--comparative anatomy, homologies and evolution of the head and neck musculature.

Science.gov (United States)

Diogo, R; Abdala, V; Lonergan, N; Wood, B A

2008-10-01

In a recent paper Diogo (2008) reported the results of the first part of an investigation of the comparative anatomy, homologies and evolution of the head and neck muscles of osteichthyans (bony fish + tetrapods). That report mainly focused on actinopterygian fish, but also compared these fish with certain non-mammalian sarcopterygians. The present paper focuses mainly on sarcopterygians, and particularly on how the head and neck muscles have evolved during the transitions from sarcopterygian fish and non-mammalian tetrapods to monotreme and therian mammals, including modern humans. The data obtained from our dissections of the head and neck muscles of representative members of sarcopterygian fish, amphibians, reptiles, monotremes and therian mammals, such as rodents, tree-shrews, colugos and primates, including modern humans, are compared with the information available in the literature. Our observations and comparisons indicate that the number of mandibular and true branchial muscles (sensu this work) present in modern humans is smaller than that found in mammals such as tree-shrews, rats and monotremes, as well as in reptiles such as lizards. Regarding the pharyngeal musculature, there is an increase in the number of muscles at the time of the evolutionary transition leading to therian mammals, but there was no significant increase during the transition leading to the emergence of higher primates and modern humans. The number of hypobranchial muscles is relatively constant within the therian mammals we examined, although in this case modern humans have more muscles than other mammals. The number of laryngeal and facial muscles in modern humans is greater than that found in most other therian taxa. Interestingly, modern humans possess peculiar laryngeal and facial muscles that are not present in the majority of the other mammalian taxa; this seems to corroborate the crucial role played by vocal communication and by facial expressions in primate and especially in

The Oldest Anatomically Modern Humans from Far Southeast Europe : Direct Dating, Culture and Behavior

NARCIS (Netherlands)

Prat, Sandrine; Pean, Stephane C.; Crepin, Laurent; Drucker, Dorothee G.; Puaud, Simon J.; Valladas, Helene; Laznickova-Galetova, Martina; van der Plicht, Johannes; Yanevich, Alexander

2011-01-01

Background: Anatomically Modern Humans (AMHs) are known to have spread across Europe during the period coinciding with the Middle to Upper Paleolithic transition. Whereas their dispersal into Western Europe is relatively well established, evidence of an early settlement of Eastern Europe by modern

Essence and constituents of modernization system of economy

Directory of Open Access Journals (Sweden)

K.О. Buzhymska

2015-06-01

Full Text Available The article substantiates the necessity and essence systems of modernization economics as part of the socio-economic system of the country and offered its overall scheme. On the basis of analysis of selected major components of modernization system: objective, external and internal environment, objects and subjects, and stage of development, the results of the operation, instruments and mechanisms. Description of the main elements of the system upgrades provided in the article to identify the causes of the inefficiency of its functioning, problems of development, underdeveloped and missing elements and outline the prospects of further development of the system.

Problems in modernization of automation systems at coal preparation plants

Science.gov (United States)

Myshlyaev, L. P.; Lyakhovets, M. V.; Venger, K. G.; Leontiev, I. A.; Makarov, G. V.; Salamatin, A. S.

2018-05-01

The factors influencing the process of modernization (reconstruction) of the automation systems at coal preparation plants are described. Problems such as heterogeneity of existing and developed systems, planning of reconstruction of a technological complex without taking into account modernization of automated systems, commissioning without stopping the existing technological complex, as well as problems of conducting procurement procedures are discussed. The option of stage-by-stage start-up and adjustment works in the conditions of modernization of systems without long stops of the process equipment is offered.

A HUMAN FACTORS META MODEL FOR U.S. NUCLEAR POWER PLANT CONTROL ROOM MODERNIZATION

Energy Technology Data Exchange (ETDEWEB)

Joe, Jeffrey C.

2017-03-01

Over the last several years, the United States (U.S.) Department of Energy (DOE) has sponsored human factors research and development (R&D) and human factors engineering (HFE) activities through its Light Water Reactor Sustainability (LWRS) program to modernize the main control rooms (MCR) of commercial nuclear power plants (NPP). Idaho National Laboratory (INL), in partnership with numerous commercial nuclear utilities, has conducted some of this R&D to enable the life extension of NPPs (i.e., provide the technical basis for the long-term reliability, productivity, safety, and security of U.S. NPPs). From these activities performed to date, a human factors meta model for U.S. NPP control room modernization can now be formulated. This paper discusses this emergent HFE meta model for NPP control room modernization, with the goal of providing an integrated high level roadmap and guidance on how to perform human factors R&D and HFE for those in the U.S. nuclear industry that are engaging in the process of upgrading their MCRs.

Classification system for reporting events involving human malfunctions

DEFF Research Database (Denmark)

Rasmussen, Jens; Pedersen, O.M.; Mancini, G.

1981-01-01

The report describes a set of categories for reporting indus-trial incidents and events involving human malfunction. The classification system aims at ensuring information adequate for improvement of human work situations and man-machine interface systems and for attempts to quantify "human error......" rates. The classification system has a multifacetted non-hierarchical struc-ture and its compatibility with Isprals ERDS classification is described. The collection of the information in general and for quantification purposes are discussed. 24 categories, 12 of which being human factors oriented......, are listed with their respective subcategories, and comments are given. Underlying models of human data processes and their typical malfunc-tions and of a human decision sequence are described....

Classification system for reporting events involving human malfunctions

International Nuclear Information System (INIS)

Rasmussen, J.; Pedersen, O.M.; Mancini, G.; Carnino, A.; Griffon, M.; Gagnolet, P.

1981-03-01

The report describes a set of categories for reporting industrial incidents and events involving human malfunction. The classification system aims at ensuring information adequate for improvement of human work situations and man-machine interface systems and for attempts to quantify ''human error'' rates. The classification system has a multifacetted non-hierarchial structure and its compatibility with Ispra's ERDS classification is described. The collection of the information in general and for quantification purposes are discussed. 24 categories, 12 of which being human factors oriented, are listed with their respective subcategories, and comments are given. Underlying models of human data processes and their typical malfunctions and of a human decision sequence are described. (author)

Optimal design methods for a digital human-computer interface based on human reliability in a nuclear power plant

International Nuclear Information System (INIS)

Jiang, Jianjun; Zhang, Li; Xie, Tian; Wu, Daqing; Li, Min; Wang, Yiqun; Peng, Yuyuan; Peng, Jie; Zhang, Mengjia; Li, Peiyao; Ma, Congmin; Wu, Xing

2017-01-01

Highlights: • A complete optimization process is established for digital human-computer interfaces of Npps. • A quick convergence search method is proposed. • The authors propose an affinity error probability mapping function to test human reliability. - Abstract: This is the second in a series of papers describing the optimal design method for a digital human-computer interface of nuclear power plant (Npp) from three different points based on human reliability. The purpose of this series is to explore different optimization methods from varying perspectives. This present paper mainly discusses the optimal design method for quantity of components of the same factor. In monitoring process, quantity of components has brought heavy burden to operators, thus, human errors are easily triggered. To solve the problem, the authors propose an optimization process, a quick convergence search method and an affinity error probability mapping function. Two balanceable parameter values of the affinity error probability function are obtained by experiments. The experimental results show that the affinity error probability mapping function about human-computer interface has very good sensitivity and stability, and that quick convergence search method for fuzzy segments divided by component quantity has better performance than general algorithm.

Proposal of adaptive human interface and study of interface evaluation method for plant operators

International Nuclear Information System (INIS)

Ujita, Hiroshi; Kubota, Ryuji.

1994-01-01

In this report, a new concept of human interface adaptive to plant operators' mental model, cognitive process and psychological state which change with time is proposed. It is composed of a function to determine information which should be indicated to operators based on the plant situation, a function to estimate operators' internal conditions, and a function to arrange the information amount, position, timing, form etc. based on their conditions. The method to evaluate the fitness of the interface by using the analysis results based on cognitive science, ergonomics, psychology and physiology is developed to achieve such an interface. Fundamental physiological experiments have been performed. Stress and workload can be identified by the ratio of the power average of the α wave fraction of a brain wave and be distinguished by the ratio of the standard deviation of the R-R interval in test and at rest, in the case of low stress such as mouse operation, calculation and walking. (author)

Proposal of adaptive human interface and study of interface evaluation method for plant operators

Energy Technology Data Exchange (ETDEWEB)

Ujita, Hiroshi [Hitachi Ltd., Ibaraki (Japan). Energy Research Lab.; Kubota, Ryuji

1994-07-01

In this report, a new concept of human interface adaptive to plant operators' mental model, cognitive process and psychological state which change with time is proposed. It is composed of a function to determine information which should be indicated to operators based on the plant situation, a function to estimate operators' internal conditions, and a function to arrange the information amount, position, timing, form etc. based on their conditions. The method to evaluate the fitness of the interface by using the analysis results based on cognitive science, ergonomics, psychology and physiology is developed to achieve such an interface. Fundamental physiological experiments have been performed. Stress and workload can be identified by the ratio of the power average of the [alpha] wave fraction of a brain wave and be distinguished by the ratio of the standard deviation of the R-R interval in test and at rest, in the case of low stress such as mouse operation, calculation and walking. (author).

Interface management for the Mined Geologic Disposal System

International Nuclear Information System (INIS)

Ashlock, K.J.; Sellers, M.D.

1998-01-01

The Management and Operations (M and O) contractor for the Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) program exists to support DOE in the successful development and operation of an integrated system to manage the nation's spent nuclear fuel and high-level wastes. As part of the system engineering and integration performed on the Yucca Mountain Project (YMP), interface management is critical in the development of the Mined Geologic Disposal System (MGDS). The application of interface management on the YMP directly addresses integration between physical elements of the MGDS and the organizations responsible for their development. An initiative to utilize interface management and the interface control document development process for organizational interfaces is also being pursued to help ensure consistent use of information by multiple organizations

INCORPORATION OF HUMAN FACTORS ENGINEERING ANALYSES AND TOOLS INTO THE DESIGN PROCESS FOR DIGITAL CONTROL ROOM UPGRADES

International Nuclear Information System (INIS)

O'HARA, J.M.; BROWN, W.

2004-01-01

Many nuclear power plants are modernizing with digital instrumentation and control systems and computer-based human-system interfaces (HSIs). The purpose of this paper is to summarize the human factors engineering (HFE) activities that can help to ensure that the design meets personnel needs. HFE activities should be integrated into the design process as a regular part of the engineering effort of a plant modification. The HFE activities will help ensure that human performance issues are addressed, that new technology supports task performance, and that the HSIs are designed in a manner that is compatible with human physiological, cognitive and social characteristics

Applying Spatial Audio to Human Interfaces: 25 Years of NASA Experience

Science.gov (United States)

Begault, Durand R.; Wenzel, Elizabeth M.; Godfrey, Martine; Miller, Joel D.; Anderson, Mark R.

2010-01-01

From the perspective of human factors engineering, the inclusion of spatial audio within a human-machine interface is advantageous from several perspectives. Demonstrated benefits include the ability to monitor multiple streams of speech and non-speech warning tones using a cocktail party advantage, and for aurally-guided visual search. Other potential benefits include the spatial coordination and interaction of multimodal events, and evaluation of new communication technologies and alerting systems using virtual simulation. Many of these technologies were developed at NASA Ames Research Center, beginning in 1985. This paper reviews examples and describes the advantages of spatial sound in NASA-related technologies, including space operations, aeronautics, and search and rescue. The work has involved hardware and software development as well as basic and applied research.

Developing Human-Computer Interface Models and Representation Techniques(Dialogue Management as an Integral Part of Software Engineering)

OpenAIRE

Hartson, H. Rex; Hix, Deborah; Kraly, Thomas M.

1987-01-01

The Dialogue Management Project at Virginia Tech is studying the poorly understood problem of human-computer dialogue development. This problem often leads to low usability in human-computer dialogues. The Dialogue Management Project approaches solutions to low usability in interfaces by addressing human-computer dialogue development as an integral and equal part of the total system development process. This project consists of two rather distinct, but dependent, parts. One is development of ...

Single amino acid radiocarbon dating of Upper Paleolithic modern humans

Science.gov (United States)

Marom, Anat; McCullagh, James S. O.; Higham, Thomas F. G.; Sinitsyn, Andrey A.; Hedges, Robert E. M.

2012-01-01

Archaeological bones are usually dated by radiocarbon measurement of extracted collagen. However, low collagen content, contamination from the burial environment, or museum conservation work, such as addition of glues, preservatives, and fumigants to “protect” archaeological materials, have previously led to inaccurate dates. These inaccuracies in turn frustrate the development of archaeological chronologies and, in the Paleolithic, blur the dating of such key events as the dispersal of anatomically modern humans. Here we describe a method to date hydroxyproline found in collagen (∼10% of collagen carbon) as a bone-specific biomarker that removes impurities, thereby improving dating accuracy and confidence. This method is applied to two important sites in Russia and allows us to report the earliest direct ages for the presence of anatomically modern humans on the Russian Plain. These dates contribute considerably to our understanding of the emergence of the Mid-Upper Paleolithic and the complex suite of burial behaviors that begin to appear during this period. PMID:22517758

Human-machine interface software package

International Nuclear Information System (INIS)

Liu, D.K.; Zhang, C.Z.

1992-01-01

The Man-Machine Interface software Package (MMISP) is designed to configure the console software of PLS 60 Mev LINAC control system. The control system of PLS 60 Mev LINAC is a distributed control system which includes the main computer (Intel 310) four local station, and two sets of industrial level console computer. The MMISP provides the operator with the display page editor, various I/O configuration such as digital signals In/Out, analog signal In/Out, waveform TV graphic display, and interactive with operator through graphic picture display, voice explanation, and touch panel. This paper describes its function and application. (author)

Development of the user interface for visualization of the auxiliary systems of the TRIGA Mark III nuclear reactor

International Nuclear Information System (INIS)

Merced D, J. E.

2016-01-01

The Instituto Nacional de Investigaciones Nucleares (ININ) has a nuclear research reactor type swimming pool with movable core cooled and moderate with light water. The nominal maximum power of the reactor is 1 MW in steady-state operation and can be pulsed at a maximum power of 2,000 MW for approximately 10 milliseconds. This reactor is mainly used to study the effects of radiation on various materials and substances. In 2001 the new control console of the nuclear reactor was installed which was based on two digital computers, one computer controls the bar management mechanisms and the other the systems to the reactor operator. In 2004, the control computer was replaced and the software was updated. Within the modernization and/or updating of the TRIGA Mark III reactor of ININ, is intended (theme of this work) to develop the user interface for the visualization of the auxiliary systems, through a Man-Machine Interface module for the renewal process of the control console. The man-machine interface system to be developed will have communication with the programmable logic controllers that will be constantly monitored and controlled to obtain real-time variables of the reactor behavior. (Author)

Virtual interface environment workstations

Science.gov (United States)

Fisher, S. S.; Wenzel, E. M.; Coler, C.; Mcgreevy, M. W.

1988-01-01

A head-mounted, wide-angle, stereoscopic display system controlled by operator position, voice and gesture has been developed at NASA's Ames Research Center for use as a multipurpose interface environment. This Virtual Interface Environment Workstation (VIEW) system provides a multisensory, interactive display environment in which a user can virtually explore a 360-degree synthesized or remotely sensed environment and can viscerally interact with its components. Primary applications of the system are in telerobotics, management of large-scale integrated information systems, and human factors research. System configuration, research scenarios, and research directions are described.

Proceedings of the 5. International Topical Meeting on Nuclear Plant Instrumentation Controls, and Human Machine Interface Technology

International Nuclear Information System (INIS)

2006-01-01

Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of nuclear power systems. The ICHMI system, together with plant personnel, is the 'central nervous system' for operating plants. It senses basic parameters, monitors performance, integrates information, and makes adjustments to plant operations as necessary. It also responds to failures and off-normal events, thus ensuring goals of efficient power production and safety. The ICHMI system embodies the sensing, communications, monitoring, control, and presentation and command systems between the process (i.e., the reactor, heat transport, and energy conversion systems) and the plant personnel. It enables plant personnel to more effectively monitor the health of the plant and to identify opportunities to improve the performance of equipment and systems as well as to anticipate, understand, and respond to potential problems. Improved controls provide the basis to operate more closely to performance margins, and the improved integration of automatic and human response enables them to work cooperatively to accomplish production and safety goals. The ICHMI system thus directly impacts the performance of the entire plant and thereby the economics, safety, and security of current and future reactor designs. The 5. International Topical Meeting on Nuclear Plant Instrumentation Control and Human-Machine Interface Technology (NPIC and HMIT 2006) is specifically devoted to advances in these important technologies. In these proceedings, more than 200 papers and panel sessions from all over the world have been assembled to share the most recent information and innovations in ICHMI technology and to discuss the important issues that face the future of the industry. The papers fall into two major groupings: instrumentation and control (I and C) and human-machine interface technology (HMIT). The I and C papers are organized into five tracks. 'Systems

Proceedings of the 5. International Topical Meeting on Nuclear Plant Instrumentation Controls, and Human Machine Interface Technology

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of nuclear power systems. The ICHMI system, together with plant personnel, is the 'central nervous system' for operating plants. It senses basic parameters, monitors performance, integrates information, and makes adjustments to plant operations as necessary. It also responds to failures and off-normal events, thus ensuring goals of efficient power production and safety. The ICHMI system embodies the sensing, communications, monitoring, control, and presentation and command systems between the process (i.e., the reactor, heat transport, and energy conversion systems) and the plant personnel. It enables plant personnel to more effectively monitor the health of the plant and to identify opportunities to improve the performance of equipment and systems as well as to anticipate, understand, and respond to potential problems. Improved controls provide the basis to operate more closely to performance margins, and the improved integration of automatic and human response enables them to work cooperatively to accomplish production and safety goals. The ICHMI system thus directly impacts the performance of the entire plant and thereby the economics, safety, and security of current and future reactor designs. The 5. International Topical Meeting on Nuclear Plant Instrumentation Control and Human-Machine Interface Technology (NPIC and HMIT 2006) is specifically devoted to advances in these important technologies. In these proceedings, more than 200 papers and panel sessions from all over the world have been assembled to share the most recent information and innovations in ICHMI technology and to discuss the important issues that face the future of the industry. The papers fall into two major groupings: instrumentation and control (I and C) and human-machine interface technology (HMIT). The I and C papers are organized into five tracks

Southern African ancient genomes estimate modern human divergence to 350,000 to 260,000 years ago.

Science.gov (United States)

Schlebusch, Carina M; Malmström, Helena; Günther, Torsten; Sjödin, Per; Coutinho, Alexandra; Edlund, Hanna; Munters, Arielle R; Vicente, Mário; Steyn, Maryna; Soodyall, Himla; Lombard, Marlize; Jakobsson, Mattias

2017-11-03

Southern Africa is consistently placed as a potential region for the evolution of Homo sapiens We present genome sequences, up to 13x coverage, from seven ancient individuals from KwaZulu-Natal, South Africa. The remains of three Stone Age hunter-gatherers (about 2000 years old) were genetically similar to current-day southern San groups, and those of four Iron Age farmers (300 to 500 years old) were genetically similar to present-day Bantu-language speakers. We estimate that all modern-day Khoe-San groups have been influenced by 9 to 30% genetic admixture from East Africans/Eurasians. Using traditional and new approaches, we estimate the first modern human population divergence time to between 350,000 and 260,000 years ago. This estimate increases the deepest divergence among modern humans, coinciding with anatomical developments of archaic humans into modern humans, as represented in the local fossil record. Copyright © 2017 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

The Small Explorer Data System - A data system based on standard interfaces

Science.gov (United States)

Smith, Brian S.; Hengemihle, Jerome

1990-01-01

The Small Explorer Data System was developed by NASA Goddard Space Flight Center using a 'standard interfaces' approach. Standard interfaces make it adaptable to a wide variety of missions. The paper describes the Small Explorer Data System with particular emphasis on the standard interfaces incorporated in both the hardware and software.

Human-computer interfaces applied to numerical solution of the Plateau problem

Science.gov (United States)

Elias Fabris, Antonio; Soares Bandeira, Ivana; Ramos Batista, Valério

2015-09-01

In this work we present a code in Matlab to solve the Problem of Plateau numerically, and the code will include human-computer interface. The Problem of Plateau has applications in areas of knowledge like, for instance, Computer Graphics. The solution method will be the same one of the Surface Evolver, but the difference will be a complete graphical interface with the user. This will enable us to implement other kinds of interface like ocular mouse, voice, touch, etc. To date, Evolver does not include any graphical interface, which restricts its use by the scientific community. Specially, its use is practically impossible for most of the Physically Challenged People.

Roadmap for Research, Development, and Demonstration of Instrumentation, Controls, and Human-Machine Interface Technologies

International Nuclear Information System (INIS)

Miller, Don W.; Arndt, Steven A.; Bond, Leonard J.; Dudenhoeffer, Donald D.; Hallbert, Bruce P.; Holcomb, David E.; Wood, Richard T.; Naser, Joseph A.; O'Hara, John M.; Quinn, Edward L.

2008-01-01

Instrumentation, controls, and human-machine interfaces are essential enabling technologies that strongly influence nuclear power plant performance and operational costs. The nuclear power industry is currently engaged in a transition from traditional analog-based instrumentation, controls, and human-machine interface (ICHMI) systems to implementations employing digital technologies. This transition has primarily occurred in an ad hoc fashion through individual system upgrades at existing plants and has been constrained by a number of concerns. Although international implementation of evolutionary nuclear power plants and the progression toward new plants in the United States have spurred design of more fully digital plant-wide ICHMI systems, the experience base in the nuclear power application domain is limited. Additionally, design and development programs by the U.S. Department of Energy (DOE) for advanced reactor concepts, such as the Generation IV Program and Next Generation Nuclear Plant (NGNP), introduce different plant conditions and unique plant configurations that increase the need for enhanced ICHMI capabilities to fully achieve programmatic goals related to economic competitiveness, safety and reliability, sustainability, and proliferation resistance and physical protection. As a result, there are challenges that need to be addressed to enable the nuclear power industry to effectively and efficiently complete the transition to safe and comprehensive use of digital technology

The role of human capital in the modern economy and indicators of its evaluation

Directory of Open Access Journals (Sweden)

N. A. Serebryakova

2017-01-01

Full Text Available The development of a modern economy, increasing its competitiveness is impossible without the accumulation and development of human capital, since the foundation of the transformation of the economic system into an innovation economy is human capital. In this regard, the level of development and effectiveness of the use of human capital is of paramount importance. In this study, an attempt is made to assess the effectiveness of the use of human capital for its contribution to the economy of the country. The authors emphasize that the modern economy makes new demands on workers, therefore it is necessary to constantly accumulate human capital, its development through continuous training, which will allow the domestic economy to exit on the trajectory of sustainable economic growth. The need to create conditions for a comprehensive increase in the level of development of human capital was stressed. The authors propose an author's approach to assess the level of development and efficiency of the use of human capital on the basis of indicators: the index of labor productivity, the share of high-technology and knowledge-intensive industries in GDP, the increase in the number of high-productivity jobs, the innovative activity of organizations, the share of domestic expenditure on research and development in GDP, the coefficient of inventive activity. The article presents the results of the study of human capital in the Russian Federation. The role of human capital in the economic development of the country has been studied and justified. Key indicators of the effectiveness of the use of human capital are analyzed. Trends in the development of human capital in the Russian Federation for 2011–2016 are shown. The analysis of the results of the assessment will reveal problems in the formation and use of human capital and determine the main directions and necessary conditions for increasing the contribution of human capital to the economy.

Potential human factors research relating to modern technology in nuclear power plants

International Nuclear Information System (INIS)

Ketchel, J.; Fink, R.; Hanes, L.; Williges, R.; Williges, B.

1994-01-01

This paper discusses proposed human factors research to address advanced human-machine interface technology in nuclear power plants. It relates to a current EPRI project to identify a prioritized list of specific research issues that could be assessed to improve control room and other user interface areas. The project seeks to bridge the gap between the functional requirements of advanced design initiatives and the human factors research needed to support them. It seeks to identify potential benefits to be expected, as well as potential problems that might be introduced by advanced technology. It provides an organized approach to identifying human factors research needs, information already available, and measures of performance and effectiveness that might be used to assess the value of potential improvements. Those parts of the proposed plan that are subsequently approved by EPRI management and by the utility advisory committee will provide a basis for recommending research priorities

Planning of community heating systems modernization and development

International Nuclear Information System (INIS)

Mroz, Tomasz M.

2008-01-01

New approach to community heating systems modernization and development planning process has been proposed. It is based on the general decision making aid algorithm. The proposed algorithm takes into account both demand and supply side of community heat market modernization and development. The first step of algorithm - analytical step, refers to data base creation, which is needed for the description of community heating system energy, ecology and economic characteristics. Analysis of those characteristics allows for the identification of heating system market modernization and development potential scenarios. The second algorithm step - decision step, allows for the identification of the most compromise scenarios of system modernization and development. To make the planning process more transparent and to increase the influence of decision makers on the planning process the ELECTRE III method was chosen as the tool of decision aid. The ELECTRE III method is based on the construction of outranking relation and definition of pseudo-criterion. The iteration mode of method application allows the decision maker and analyst for the investigation of the sensitivity of final solution to the changing preference model. One of the methods of statistics - the creditability of mean range method was used for the determination of initial definition of pseudo-criterion. Proposed algorithm and decision aid method were employed for the case study analysis referring to the choice of the heating system for new developing urban area. (author)

Testing the hypothesis of fire use for ecosystem management by neanderthal and upper palaeolithic modern human populations.

Directory of Open Access Journals (Sweden)

Anne-Laure Daniau

Full Text Available BACKGROUND: It has been proposed that a greater control and more extensive use of fire was one of the behavioral innovations that emerged in Africa among early Modern Humans, favouring their spread throughout the world and determining their eventual evolutionary success. We would expect, if extensive fire use for ecosystem management were a component of the modern human technical and cognitive package, as suggested for Australia, to find major disturbances in the natural biomass burning variability associated with the colonisation of Europe by Modern Humans. METHODOLOGY/PRINCIPAL FINDINGS: Analyses of microcharcoal preserved in two deep-sea cores located off Iberia and France were used to reconstruct changes in biomass burning between 70 and 10 kyr cal BP. Results indicate that fire regime follows the Dansgaard-Oeschger climatic variability and its impacts on fuel load. No major disturbance in natural fire regime variability is observed at the time of the arrival of Modern Humans in Europe or during the remainder of the Upper Palaeolithic (40-10 kyr cal BP. CONCLUSIONS/SIGNIFICANCE: Results indicate that either Neanderthals and Modern humans did not influence fire regime or that, if they did, their respective influence was comparable at a regional scale, and not as pronounced as that observed in the biomass burning history of Southeast Asia.

[The development of molecular human genetics and its significance for perspectives of modern medicine].

Science.gov (United States)

Coutelle, C; Speer, A; Grade, K; Rosenthal, A; Hunger, H D

1989-01-01

The introduction of molecular human genetics has become a paradigma for the application of genetic engineering in medicine. The main principles of this technology are the isolation of molecular probes, their application in hybridization reactions, specific gene-amplification by the polymerase chain reaction, and DNA sequencing reactions. These methods are used for the analysis of monogenic diseases by linkage studies and the elucidation of the molecular defect causing these conditions, respectively. They are also the basis for genomic diagnosis of monogenic diseases, introduced into the health care system of the GDR by a national project on Duchenne/Becker muscular dystrophy, Cystic Fibrosis and Phenylketonuria. The rapid development of basic research on the molecular analysis of the human genome and genomic diagnosis indicates, that human molecular genetics is becoming a decisive basic discipline of modern medicine.

The Human Resources Management System: Part 1.

Science.gov (United States)

Ceriello, Vincent R.

1982-01-01

Presents a systematic and disciplined approach to planning for the development and implementation of an information system which will collect, store, maintain, and report human resources data. Discusses guidelines, priorities, training requirements, security, auditing, interface with payroll, and personnel reporting. (CT)

Autotuning of PID controller by means of human machine interface device

Directory of Open Access Journals (Sweden)

Michał Awtoniuk

2017-06-01

Full Text Available More and more control systems are based on industry microprocessors like PLC controllers (Programmable Logic Controller. The most commonly used control algorithm is PID (Proportional-Integral-Derivative algorithm. Autotuning procedure is not available in every PLC. These controllers are typically used in cooperation with HMI (Human Machine Interface devices. In the study two procedures of autotuning of the PID controller were implemented in the HMI device: step method and relay method. Six tuning rules for step methods and one for relay method were chosen. The autotuning procedures on simulated controlled object and PLC controller without build-in autotuning were tested. The object of control was first order system plus time delay.

Mechanically Compliant Electronic Materials for Wearable Photovoltaics and Human-Machine Interfaces

Science.gov (United States)

O'Connor, Timothy Francis, III

Applications of stretchable electronic materials for human-machine interfaces are described herein. Intrinsically stretchable organic conjugated polymers and stretchable electronic composites were used to develop stretchable organic photovoltaics (OPVs), mechanically robust wearable OPVs, and human-machine interfaces for gesture recognition, American Sign Language Translation, haptic control of robots, and touch emulation for virtual reality, augmented reality, and the transmission of touch. The stretchable and wearable OPVs comprise active layers of poly-3-alkylthiophene:phenyl-C61-butyric acid methyl ester (P3AT:PCBM) and transparent conductive electrodes of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) and devices could only be fabricated through a deep understanding of the connection between molecular structure and the co-engineering of electronic performance with mechanical resilience. The talk concludes with the use of composite piezoresistive sensors two smart glove prototypes. The first integrates stretchable strain sensors comprising a carbon-elastomer composite, a wearable microcontroller, low energy Bluetooth, and a 6-axis accelerometer/gyroscope to construct a fully functional gesture recognition glove capable of wirelessly translating American Sign Language to text on a cell phone screen. The second creates a system for the haptic control of a 3D printed robot arm, as well as the transmission of touch and temperature information.

ON THE EFFECT OF ADAPTIVE USER INTERFACES ON RELIABILITY AND EFFICIENCY OF THE AUTOMATED SYSTEMS

Directory of Open Access Journals (Sweden)

Yu. O. Furtat

2014-01-01

Full Text Available In modern automated systems users often have to face the information overload problem because of ever increasing volumes of information with short time processing requirements. Working in such conditions affects the system operator’s work quality and the systems reliability. One possible approach to solving the information overload problem is to create personalized interfaces that take into account the user’s information management particularities. System operator’s features, which determine the shape and pace of information representation preferred by him, form the user’s cognitive portrait. To determine the values of portrait characteristics professional testing with the assistance of psychologists or operational testing at the user’s workplace is performed. The second option is more preferable for use in automated systems, since it has no issue with lack of psychologists. Cognitive portrait is then built as a result of user interaction with the software diagnostic tools that are based on the cognitive psychology methods. The effect of personalized user interface application in an automated system can be estimated by quantifying how the reduction in user’s response time to critical events affects the system reliability and efficiency. For this purpose, the formulae of reliability theory for complex automated systems are used, showing the dependence between the system reliability and user’s response time to critical event.

Calcaneus length determines running economy: implications for endurance running performance in modern humans and Neandertals.

Science.gov (United States)

Raichlen, David A; Armstrong, Hunter; Lieberman, Daniel E

2011-03-01

The endurance running (ER) hypothesis suggests that distance running played an important role in the evolution of the genus Homo. Most researchers have focused on ER performance in modern humans, or on reconstructing ER performance in Homo erectus, however, few studies have examined ER capabilities in other members of the genus Homo. Here, we examine skeletal correlates of ER performance in modern humans in order to evaluate the energetics of running in Neandertals and early Homo sapiens. Recent research suggests that running economy (the energy cost of running at a given speed) is strongly related to the length of the Achilles tendon moment arm. Shorter moment arms allow for greater storage and release of elastic strain energy, reducing energy costs. Here, we show that a skeletal correlate of Achilles tendon moment arm length, the length of the calcaneal tuber, does not correlate with walking economy, but correlates significantly with running economy and explains a high proportion of the variance (80%) in cost between individuals. Neandertals had relatively longer calcaneal tubers than modern humans, which would have increased their energy costs of running. Calcaneal tuber lengths in early H. sapiens do not significantly differ from those of extant modern humans, suggesting Neandertal ER economy was reduced relative to contemporaneous anatomically modern humans. Endurance running is generally thought to be beneficial for gaining access to meat in hot environments, where hominins could have used pursuit hunting to run prey taxa into hyperthermia. We hypothesize that ER performance may have been reduced in Neandertals because they lived in cold climates. Copyright © 2011 Elsevier Ltd. All rights reserved.

A multi-system interface module for automating the patient treatment cycle

International Nuclear Information System (INIS)

Fox, Tim; Brooks, Ken; Davis, Larry

1996-01-01

Purpose: The use of many different computer systems in a radiation oncology department for treatment simulation, planning, and delivery typically introduces increased planning times and redundant data entry. This redundancy is not only a time-consuming chore, but it also has the possibility of introducing human errors at each step. These computer systems often have different hardware platforms and operating systems making it even more difficult to the users for accessing the data. In addition, there is typically a common set of patient and treatment information scattered among these various systems. The purpose of this study is to describe our experience for automating the patient treatment cycle which includes treatment simulation, planning, and delivery using an interface module for sharing this core set of data among the various computer systems in a department without additional complexity to the staff. Materials and Methods: An object-oriented software tool was developed to support a user-driven, dependent query, retrieve, and update of different radiation therapy data systems using Networked File Systems (NFS) and the Structured Query Language (SQL). The interface module was designed to support a many-to-many systems' connectivity depending on the needs of a department. The software tool makes use of the Virtual Machine Platform and Foundation Library specifications of the NCI-sponsored Radiation Therapy Planning Tools Collaborative Working Group for accessing treatment planning data from a system that conforms to these standards. It also takes advantage of the Microsoft Open Database Connectivity (ODBC) standard for accessing commercial radiation therapy database systems. A custom data access method is developed for any data system that does not conform to these two standards. The software tool has an intuitive graphical user interface for review and verification of the data after the query and retrieve process. The software was written in the C++ language

Evaluation of Explanation Interfaces in Recommender Systems

Directory of Open Access Journals (Sweden)

Sergio Cleger-Tamayo

2017-05-01

Full Text Available Explaining interfaces become a useful tool in systems that have a lot of content to evaluate by users. The different interfaces represent a help for the undecided users or those who consider systems as boxed black smart. These systems present recommendations to users based on different learning models. In this paper, we present the different objectives of the explanation interfaces and some of the criteria that you can evaluate, as well as a proposal of metrics to obtain results in the experiments. Finally, we showed the main results of a study with real users and their interaction with e-commerce systems. Among the main results, highlight the positive impact in relation to the time of interaction with the applications and acceptance of the recommendations received.

A systems engineering perspective on the human-centered design of health information systems.

Science.gov (United States)

Samaras, George M; Horst, Richard L

2005-02-01

The discipline of systems engineering, over the past five decades, has used a structured systematic approach to managing the "cradle to grave" development of products and processes. While elements of this approach are typically used to guide the development of information systems that instantiate a significant user interface, it appears to be rare for the entire process to be implemented. In fact, a number of authors have put forth development lifecycle models that are subsets of the classical systems engineering method, but fail to include steps such as incremental hazard analysis and post-deployment corrective and preventative actions. In that most health information systems have safety implications, we argue that the design and development of such systems would benefit by implementing this systems engineering approach in full. Particularly with regard to bringing a human-centered perspective to the formulation of system requirements and the configuration of effective user interfaces, this classical systems engineering method provides an excellent framework for incorporating human factors (ergonomics) knowledge and integrating ergonomists in the interdisciplinary development of health information systems.

Mold Heating and Cooling Pump Package Operator Interface Controls Upgrade

Energy Technology Data Exchange (ETDEWEB)

Josh A. Salmond

2009-08-07

The modernization of the Mold Heating and Cooling Pump Package Operator Interface (MHC PP OI) consisted of upgrading the antiquated single board computer with a proprietary operating system to off-the-shelf hardware and off-the-shelf software with customizable software options. The pump package is the machine interface between a central heating and cooling system that pumps heat transfer fluid through an injection or compression mold base on a local plastic molding machine. The operator interface provides the intelligent means of controlling this pumping process. Strict temperature control of a mold allows the production of high quality parts with tight tolerances and low residual stresses. The products fabricated are used on multiple programs.

Human Motion Tracking and Glove-Based User Interfaces for Virtual Environments in ANVIL

Science.gov (United States)

Dumas, Joseph D., II

2002-01-01

The Army/NASA Virtual Innovations Laboratory (ANVIL) at Marshall Space Flight Center (MSFC) provides an environment where engineers and other personnel can investigate novel applications of computer simulation and Virtual Reality (VR) technologies. Among the many hardware and software resources in ANVIL are several high-performance Silicon Graphics computer systems and a number of commercial software packages, such as Division MockUp by Parametric Technology Corporation (PTC) and Jack by Unigraphics Solutions, Inc. These hardware and software platforms are used in conjunction with various VR peripheral I/O (input / output) devices, CAD (computer aided design) models, etc. to support the objectives of the MSFC Engineering Systems Department/Systems Engineering Support Group (ED42) by studying engineering designs, chiefly from the standpoint of human factors and ergonomics. One of the more time-consuming tasks facing ANVIL personnel involves the testing and evaluation of peripheral I/O devices and the integration of new devices with existing hardware and software platforms. Another important challenge is the development of innovative user interfaces to allow efficient, intuitive interaction between simulation users and the virtual environments they are investigating. As part of his Summer Faculty Fellowship, the author was tasked with verifying the operation of some recently acquired peripheral interface devices and developing new, easy-to-use interfaces that could be used with existing VR hardware and software to better support ANVIL projects.

Development of a user interface style guide for the reactor protection system cabinet operator module

International Nuclear Information System (INIS)

Lee, Hyun-Chul; Lee, Dong-Young; Lee, Jung-Woon

2004-01-01

The reactor protection system (RPS) plays the roles of generating the reactor trip signal and the engineered safety features (ESF) actuation signal when the monitored plant processes reach the predefined limits. A Korean project group is developing a new digitalized RPS and the Cabinet Operator Module (COM) of the RPS is used for the RPS integrity testing and monitoring by an equipment operator. A flat panel display (FPD) with a touch screen capability is provided as a main user interface for the RPS operation. To support the RPS COM user interface design, actually the FPD screen design, we developed a user interface style guide because the system designer could not properly deal with the many general human factors design guidelines. To develop the user interface style guide, various design guideline gatherings, a walk-though with a video recorder, guideline selection with respect to user interface design elements, determination of the properties of the design elements, discussion with system designers, and a conversion of the properties into the screen design were carried out. This paper describes the process details and the findings in the course of the style guide development. (Author)

Humans, Intelligent Technology, and Their Interface: A Study of Brown’s Point

Science.gov (United States)

2017-12-01

INTELLIGENT TECHNOLOGY , AND THEIR INTERFACE: A STUDY OF BROWN’S POINT by Jackie L. J. White December 2017 Thesis Advisor: Carolyn Halladay...REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE HUMANS, INTELLIGENT TECHNOLOGY , AND THEIR INTERFACE: A STUDY OF BROWN’S POINT...with the technology before and during the accident. I combined the findings from the accident investigation with various heuristics regarding the human

Control system design considerations in a modern nuclear power plant

International Nuclear Information System (INIS)

Foster, P.; Raiskums, G.; Harber, J.; Tikku, S.

2010-01-01

Applying new technologies is a challenge for instrumentation and control (I and C) designers to ensure that the overall principles of defence-in-depth, the independence of safety functions (credited in the safety case), and modern human factors engineering principles are maintained. This paper describes the Advanced CANDU Reactor (ACR-1000) I and C architecture, including the display/control systems and the design approaches employed to ensure that the fundamental premise of independence between safety and process control is not compromised and that the reliability targets for each layer of protection are fulfilled to meet the overall plant safety goals. (author)

PyCMSXiO: an external interface to script treatment plans for the Elekta® CMS XiO treatment planning system

Science.gov (United States)

Xing, Aitang; Arumugam, Sankar; Holloway, Lois; Goozee, Gary

2014-03-01

Scripting in radiotherapy treatment planning systems not only simplifies routine planning tasks but can also be used for clinical research. Treatment planning scripting can only be utilized in a system that has a built-in scripting interface. Among the commercially available treatment planning systems, Pinnacle (Philips) and Raystation (Raysearch Lab.) have inherent scripting functionality. CMS XiO (Elekta) is a widely used treatment planning system in radiotherapy centres around the world, but it does not have an interface that allows the user to script radiotherapy plans. In this study an external scripting interface, PyCMSXiO, was developed for XiO using the Python programming language. The interface was implemented as a python package/library using a modern object-oriented programming methodology. The package was organized as a hierarchy of different classes (objects). Each class (object) corresponds to a plan object such as the beam of a clinical radiotherapy plan. The interface of classes was implemented as object functions. Scripting in XiO using PyCMSXiO is comparable with Pinnacle scripting. This scripting package has been used in several research projects including commissioning of a beam model, independent three-dimensional dose verification for IMRT plans and a setup-uncertainty study. Ease of use and high-level functions provided in the package achieve a useful research tool. It was released as an open-source tool that may benefit the medical physics community.

PyCMSXiO: an external interface to script treatment plans for the Elekta® CMS XiO treatment planning system

International Nuclear Information System (INIS)

Xing, Aitang; Arumugam, Sankar; Holloway, Lois; Goozee, Gary

2014-01-01

Scripting in radiotherapy treatment planning systems not only simplifies routine planning tasks but can also be used for clinical research. Treatment planning scripting can only be utilized in a system that has a built-in scripting interface. Among the commercially available treatment planning systems, Pinnacle (Philips) and Raystation (Raysearch Lab.) have inherent scripting functionality. CMS XiO (Elekta) is a widely used treatment planning system in radiotherapy centres around the world, but it does not have an interface that allows the user to script radiotherapy plans. In this study an external scripting interface, PyCMSXiO, was developed for XiO using the Python programming language. The interface was implemented as a python package/library using a modern object-oriented programming methodology. The package was organized as a hierarchy of different classes (objects). Each class (object) corresponds to a plan object such as the beam of a clinical radiotherapy plan. The interface of classes was implemented as object functions. Scripting in XiO using PyCMSXiO is comparable with Pinnacle scripting. This scripting package has been used in several research projects including commissioning of a beam model, independent three-dimensional dose verification for IMRT plans and a setup-uncertainty study. Ease of use and high-level functions provided in the package achieve a useful research tool. It was released as an open-source tool that may benefit the medical physics community.

Computer-based diagnostic monitoring to enhance the human-machine interface of complex processes

International Nuclear Information System (INIS)

Kim, I.S.

1992-02-01

There is a growing interest in introducing an automated, on-line, diagnostic monitoring function into the human-machine interfaces (HMIs) or control rooms of complex process plants. The design of such a system should be properly integrated with other HMI systems in the control room, such as the alarms system or the Safety Parameter Display System (SPDS). This paper provides a conceptual foundation for the development of a Plant-wide Diagnostic Monitoring System (PDMS), along with functional requirements for the system and other advanced HMI systems. Insights are presented into the design of an efficient and robust PDMS, which were gained from a critical review of various methodologies developed in the nuclear power industry, the chemical process industry, and the space technological community

Classification system for reporting events involving human malfunctions

International Nuclear Information System (INIS)

Rasmussen, J.; Pedersen, O.M.; Mancini, G.

1981-01-01

The report describes a set of categories for reporting industrial incidents and events involving human malfunction. The classification system aims at ensuring information adequate for improvement of human work situations and man-machine interface systems and for attempts to quantify ''human error'' rates. The classification system has a multifacetted non-hierarchical structure and its compatibility with Ispra's ERDS classification is described. The collection of the information in general and for quantification purposes are discussed. 24 categories, 12 of which being human factors-oriented, are listed with their respective subcategories, and comments are given. Underlying models of human data process and their typical malfuntions and of a human decision sequence are described. The work reported is a joint contribution to the CSNI Group of Experts on Human Error Data and Assessment

A comparative evaluation plan for the Maintenance, Inventory, and Logistics Planning (MILP) System Human-Computer Interface (HCI)

Science.gov (United States)

Overmyer, Scott P.

1993-01-01

The primary goal of this project was to develop a tailored and effective approach to the design and evaluation of the human-computer interface (HCI) to the Maintenance, Inventory and Logistics Planning (MILP) System in support of the Mission Operations Directorate (MOD). An additional task that was undertaken was to assist in the review of Ground Displays for Space Station Freedom (SSF) by attending the Ground Displays Interface Group (GDIG), and commenting on the preliminary design for these displays. Based upon data gathered over the 10 week period, this project has hypothesized that the proper HCI concept for navigating through maintenance databases for large space vehicles is one based upon a spatial, direct manipulation approach. This dialogue style can be then coupled with a traditional text-based DBMS, after the user has determined the general nature and location of the information needed. This conclusion is in contrast with the currently planned HCI for MILP which uses a traditional form-fill-in dialogue style for all data access and retrieval. In order to resolve this difference in HCI and dialogue styles, it is recommended that comparative evaluation be performed which combines the use of both subjective and objective metrics to determine the optimal (performance-wise) and preferred approach for end users. The proposed plan has been outlined in the previous paragraphs and is available in its entirety in the Technical Report associated with this project. Further, it is suggested that several of the more useful features of the Maintenance Operations Management System (MOMS), especially those developed by the end-users, be incorporated into MILP to save development time and money.

Cognitive Determinants of the Effectiveness of Technological Interfaces

Directory of Open Access Journals (Sweden)

Paweł Piotr

2016-12-01

Full Text Available Interface plays an important function in the operational process of modern interactive information technologies. Its task is to enable communication, signal exchange, and cooperation with the human mind. Technological interface is understood as the place where technology and software operating a computer must enter into interaction with the mind. The response is provided by the mind, which communicates with the machine performing the tasks imposed by the mind. The technology with its complexities can be a problem for the operator, but on the other hand, the person can also be a problem for the technology by vague and unspecified tasks transferred for execution. I would like to view various aspects of the functioning of the interface by analyzing the four modalities: perceptual modality, associated with memory and experience, with the expectations of users, and conceptual modality related to understanding of the technology by the user.

The human dimensions of climate change: A micro-level assessment of views from the ecological modernization, political economy and human ecology perspectives.

Science.gov (United States)

Adua, Lazarus; York, Richard; Schuelke-Leech, Beth-Anne