WorldWideScience

Sample records for hug physical contact

  1. Hugging fusion and related topics

    Energy Technology Data Exchange (ETDEWEB)

    Iwamoto, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-07-01

    An important problem related to the synthesis of very heavy nuclides by fusion of two heavy-ions is the extra push effect. To avoid it, we propose a hugging fusion, which is the fusion of two well-deformed heavy-ions. (author)

  2. When VLT Meets HST : The HUGS Survey

    NARCIS (Netherlands)

    Fontana, A.; Dunlop, J. S.; Paris, D.; Targett, T.; Boutsia, K.; Castellano, M.; Galametz, A.; Grazian, A.; McLure, R.; Merlin, E.; Pentericci, L.; Wuyts, S.; Almaini, O.; Caputi, K.; Chary, R.-R.; Cirasuolo, M.; Conselice, C.; Cooray, A.; Daddi, E.; Dickinson, M.; Faber, S. M.; Fazio, G.; Ferguson, H.; Giallongo, E.; Giavalisco, M.; Grogin, N.; Hathi, N.; Koekemoer, A.; Koo, D. C.; Lucas, R.; Nonino, M.; Rix, H.-W.; Renzini, A.; Rosario, D.; Santini, P.; Scarlata, C.; Sommariva, V.; Stark, D. P.; van der Wel, A.; Vanzella, E.; Wild, V.; Yan, H.; Zibetti, S.

    2014-01-01

    A new ultra-deep near-infrared imaging survey has been completed using the HAWK-I imager at the VLT. It is named HUGS (HAWK-I Ultra Deep Survey and GOODS Survey) and delivers the deepest, highest quality images ever collected in the K-band. HUGS complements the data delivered by the HST CANDELS surv

  3. EURANOS. The Handbook Users Group (HUG)

    DEFF Research Database (Denmark)

    Nisbet, A.F.; Andersson, Kasper Grann; Carlé, B.;

    the demonstrations were discussed with the HUG steering group who then made recommendations to the handbook developers on how the handbooks could be improved in the future. Updates have been made and version 2 of the generic handbooks will be published in 2009. In the future, it is likely that the HUG will join......Three handbooks to assist in the management of contaminated food production systems, inhabited areas and drinking water supplies have been developed in conjunction with a wide range of stakeholders in Europe. These handbooks are living documents that will require updating from time to time...... to remain state-of-the-art. To address this need, a handbook users’ group (HUG) was established in 2007 to provide a platform for maintaining the handbooks and to build a network of users for both the generic handbooks and any subsequently customised versions. A web site was set up (www...

  4. Modiolus-Hugging Intracochlear Electrode Array with Shape Memory Alloy

    Directory of Open Access Journals (Sweden)

    Kyou Sik Min

    2013-01-01

    Full Text Available In the cochlear implant system, the distance between spiral ganglia and the electrodes within the volume of the scala tympani cavity significantly affects the efficiency of the electrical stimulation in terms of the threshold current level and spatial selectivity. Because the spiral ganglia are situated inside the modiolus, the central axis of the cochlea, it is desirable that the electrode array hugs the modiolus to minimize the distance between the electrodes and the ganglia. In the present study, we propose a shape-memory-alloy-(SMA- embedded intracochlear electrode which gives a straight electrode a curved modiolus-hugging shape using the restoration force of the SMA as triggered by resistive heating after insertion into the cochlea. An eight-channel ball-type electrode array is fabricated with an embedded titanium-nickel SMA backbone wire. It is demonstrated that the electrode array changes its shape in a transparent plastic human cochlear model. To verify the safe insertion of the electrode array into the human cochlea, the contact pressures during insertion at the electrode tip and the contact pressures over the electrode length after insertion were calculated using a 3D finite element analysis. The results indicate that the SMA-embedded electrode is functionally and mechanically feasible for clinical applications.

  5. Modiolus-hugging intracochlear electrode array with shape memory alloy.

    Science.gov (United States)

    Min, Kyou Sik; Jun, Sang Beom; Lim, Yoon Seob; Park, Se-Ik; Kim, Sung June

    2013-01-01

    In the cochlear implant system, the distance between spiral ganglia and the electrodes within the volume of the scala tympani cavity significantly affects the efficiency of the electrical stimulation in terms of the threshold current level and spatial selectivity. Because the spiral ganglia are situated inside the modiolus, the central axis of the cochlea, it is desirable that the electrode array hugs the modiolus to minimize the distance between the electrodes and the ganglia. In the present study, we propose a shape-memory-alloy-(SMA-) embedded intracochlear electrode which gives a straight electrode a curved modiolus-hugging shape using the restoration force of the SMA as triggered by resistive heating after insertion into the cochlea. An eight-channel ball-type electrode array is fabricated with an embedded titanium-nickel SMA backbone wire. It is demonstrated that the electrode array changes its shape in a transparent plastic human cochlear model. To verify the safe insertion of the electrode array into the human cochlea, the contact pressures during insertion at the electrode tip and the contact pressures over the electrode length after insertion were calculated using a 3D finite element analysis. The results indicate that the SMA-embedded electrode is functionally and mechanically feasible for clinical applications.

  6. Modiolus-Hugging Intracochlear Electrode Array with Shape Memory Alloy

    Science.gov (United States)

    Min, Kyou Sik; Lim, Yoon Seob; Park, Se-Ik; Kim, Sung June

    2013-01-01

    In the cochlear implant system, the distance between spiral ganglia and the electrodes within the volume of the scala tympani cavity significantly affects the efficiency of the electrical stimulation in terms of the threshold current level and spatial selectivity. Because the spiral ganglia are situated inside the modiolus, the central axis of the cochlea, it is desirable that the electrode array hugs the modiolus to minimize the distance between the electrodes and the ganglia. In the present study, we propose a shape-memory-alloy-(SMA-) embedded intracochlear electrode which gives a straight electrode a curved modiolus-hugging shape using the restoration force of the SMA as triggered by resistive heating after insertion into the cochlea. An eight-channel ball-type electrode array is fabricated with an embedded titanium-nickel SMA backbone wire. It is demonstrated that the electrode array changes its shape in a transparent plastic human cochlear model. To verify the safe insertion of the electrode array into the human cochlea, the contact pressures during insertion at the electrode tip and the contact pressures over the electrode length after insertion were calculated using a 3D finite element analysis. The results indicate that the SMA-embedded electrode is functionally and mechanically feasible for clinical applications. PMID:23762181

  7. T.S.K.H.: Tickle Snug Kiss Hug; Exercises and Tricks for Parent-Child Fun.

    Science.gov (United States)

    May, Betty

    This book presents a collection of physical activities for parents and children. Although all of the activities provide some exercise and physical conditioning, the book emphasizes having fun. The book encourages the physical closeness of tickling, snuggling, kissing and hugging (TSKH) as an important part of each activity. Each activity…

  8. The Hug-up Test: A New, Sensitive Diagnostic Test for Supraspinatus Tears

    Institute of Scientific and Technical Information of China (English)

    Yu-Lei Liu; Ying-Fang Ao; Hui Yan; Guo-Qing Cui

    2016-01-01

    Background:The supraspinatus tendon is the most commonly affected tendon in rotator cufftears.Early detection ofa supraspinatus tear using an accurate physical examination is,therefore,important.However,the currently used physical tests for detecting supraspinatus tears are poor diagnostic indicators and involve a wide range of sensitivity and specificity values.Therefore,the aim of this study was to establish a new physical test for the diagnosis of supraspinatus tears and evaluate its accuracy in comparison with conventional tests.Methods:Between November 2012 and January 2014,200 consecutive patients undergoing shoulder arthroscopy were prospectively evaluated preoperatively.The hug-up test,empty can (EC) test,full can (FC) test,Neer impingement sign,and Hawkins-Kennedy impingement sign were used and compared statistically for their accuracy in terms of supraspinatus tears,with arthroscopic findings as the gold standard.Muscle strength was precisely quantified using an electronic digital tensiometer.Results:The prevalence of supraspinatus tears was 76.5%.The hug-up test demonstrated the highest sensitivity (94.1%),with a low negative likelihood ratio (NLR,0.08) and comparable specificity (76.6%) compared with the other four tests.The area under the receiver operating characteristic curve for the hug-up test was 0.854,with no statistical difference compared with the EC test (z =1.43 8,P =0.075) or the FC test (z =1.498,P =0.067).The hug-up test showed no statistical difference in terms of detecting different tear patterns according to the position (x2 =0.578,P =0.898) and size (Fisher's exact test,P > 0.999) compared with the arthroscopic examination.The interobserver reproducibility of the hug-up test was high,with a kappa coefficient of 0.823.Conclusions:The hug-up test can accurately detect supraspinatus tears with a high sensitivity,comparable specificity,and low NLR compared with the conventional clinical tests and could,therefore,improve the

  9. The Hug-up Test: A New, Sensitive Diagnostic Test for Supraspinatus Tears

    Directory of Open Access Journals (Sweden)

    Yu-Lei Liu

    2016-01-01

    Full Text Available Background: The supraspinatus tendon is the most commonly affected tendon in rotator cuff tears. Early detection of a supraspinatus tear using an accurate physical examination is, therefore, important. However, the currently used physical tests for detecting supraspinatus tears are poor diagnostic indicators and involve a wide range of sensitivity and specificity values. Therefore, the aim of this study was to establish a new physical test for the diagnosis of supraspinatus tears and evaluate its accuracy in comparison with conventional tests. Methods: Between November 2012 and January 2014, 200 consecutive patients undergoing shoulder arthroscopy were prospectively evaluated preoperatively. The hug-up test, empty can (EC test, full can (FC test, Neer impingement sign, and Hawkins-Kennedy impingement sign were used and compared statistically for their accuracy in terms of supraspinatus tears, with arthroscopic findings as the gold standard. Muscle strength was precisely quantified using an electronic digital tensiometer. Results: The prevalence of supraspinatus tears was 76.5%. The hug-up test demonstrated the highest sensitivity (94.1%, with a low negative likelihood ratio (NLR, 0.08 and comparable specificity (76.6% compared with the other four tests. The area under the receiver operating characteristic curve for the hug-up test was 0.854, with no statistical difference compared with the EC test (z = 1.438, P = 0.075 or the FC test (z = 1.498, P = 0.067. The hug-up test showed no statistical difference in terms of detecting different tear patterns according to the position (χ2 = 0.578, P = 0.898 and size (Fisher′s exact test, P > 0.999 compared with the arthroscopic examination. The interobserver reproducibility of the hug-up test was high, with a kappa coefficient of 0.823. Conclusions: The hug-up test can accurately detect supraspinatus tears with a high sensitivity, comparable specificity, and low NLR compared with the conventional

  10. Fast Hugs with Intensive Care Unit

    Directory of Open Access Journals (Sweden)

    Nimet Şenoğlu

    2014-12-01

    Full Text Available Mnemonics are commonly used in medical procedures as cognitive aids to guide clinicians all over the world. The mnemonic ‘FAST HUG’ (Feeding, Analgesia, Sedation, Thromboembolic prophylaxis, Head-of-bed elevation, stress Ulcer prevention, and Glycemic control was proposed almost ten years ago for patient care in intensive care units and have been commonly used worldwide. Beside this, new mnemonics were also determined for improving routine care of the critically ill patients. But none of this was accepted as much as “FAST HUGS”. In our clinical practice we delivered an another mnemonic as FAST HUGS with ICU (Feeding, Analgesia, Sedation, Thromboembolic prophylaxis, Head-of-bed elevation, Stress ulcer prevention, and Glucose control, Water balance, Investigation and Results, Therapy, Hypo-hyper delirium, Invasive devices, Check the daily infection parameters, Use a checklist for checking some of the key aspects in the general care of intensive care patients. In this review we summarized these mnemonics.

  11. Touched by robots: effects of physical contact and proactiveness

    NARCIS (Netherlands)

    Cramer, H.; Amin, A.K.; Evers, V.; Kemper, N.

    2009-01-01

    Even though robots' physical embodiment makes it likely humans will come into physical contact with robots, the effects of touch on attitudes in human-robot interaction are still relatively unknown. This survey and video-based, experiment (N=199) investigates the effects of touch and robots interact

  12. Characterizing the microscopic physics near moving contact lines using dynamic contact angle data.

    Science.gov (United States)

    Ramé, E; Garoff, S; Willson, K R

    2004-09-01

    Directly probing the fluid flow and liquid-vapor interface shape in the microscopic immediate vicinity of the moving contact line can only be accomplished in very specific and isolated cases. Yet this physics is critical to macroscopic dynamic wetting. Here we examine the microscopic (or inner) physics of spreading silicone fluids using data of macroscopic dynamic contact angle versus Capillary number Ca=U mu/sigma. This dynamic contact angle is precisely defined so that it can be related back to the microscopic behavior through detailed theory. Our results indicate that the parameters describing the inner region have a detectable dependence on spreading velocity when this velocity exceeds a critical value. This dependence is not scaled (i.e., the data are not collapsed) by Ca, which suggests that an additional time scale must be present in the model of the inner region.

  13. Impact of measurable physical phenomena on contact thermal comfort

    Directory of Open Access Journals (Sweden)

    Fojtlín Miloš

    2017-01-01

    Full Text Available Cabin HVAC (Heating Ventilation and Air-conditioning systems have become an essential part of personal vehicles as demands for comfortable transport are still rising. In fact, 85 % of the car trips in Europe are shorter than 18 km and last only up to 30 minutes. Under such conditions, the HVAC unit cannot often ensure desired cabin environment and passengers are prone to experience thermal stress. For this reason, additional comfort systems, such as heated or ventilated seats, are available on the market. However, there is no straightforward method to evaluate thermal comfort at the contact surfaces nowadays. The aim of this work is to summarise information about heated and ventilated seats. These technologies use electrical heating and fan driven air to contact area in order to achieve enhanced comfort. It is also expected, that such measures may contribute to lower energy consumption. Yet, in real conditions it is almost impossible to measure the airflow through the ventilated seat directly. Therefore, there is a need for an approach that would correlate measurable physical phenomena with thermal comfort. For this reason, a method that exploits a measurement of temperatures and humidity at the contact area is proposed. Preliminary results that correlate comfort with measurable physical phenomena are demonstrated.

  14. On the Physical Processes in Contact Binary Systems

    Institute of Scientific and Technical Information of China (English)

    Run-Qian Huang; Han-Feng Song; Shao-Lan Bi

    2007-01-01

    Three important physical processes occurring in contact binary systems are studied.The first one is the effect of spin, orbital rotation and tide on the structure of the components,which includes also the effect of meridian circulation on the mixing of the chemical elements in the components. The second one is the mass and energy exchange between the components.To describe the energy exchange, a new approach is introduced based on the understanding that the exchange is due to the release of the potential, kinetic and thermal energy of the exchanged mass. The third is the loss of mass and angular momentum through the outer Lagrangian point. The rate of mass loss and the angular momentum carried away by the lost mass are discussed. To show the effects of these processes, we follow the evolution of a binary system consisting of a 12M⊙ and a 5M⊙ star with mass exchange between the components and mass loss via the outer Lagrangian point, both with and without considering the effects of rotation and tide. The result shows that the effect of rotation and tide advances the start of the semi-detached and the contact phases, and delays the end of the hydrogen-burning phase of the primary. Furthermore, it can change not only the occurrence of mass and angular momentum loss via the outer Lagrangian point, but also the contact or semi-contact status of the system. Thus, this effect can result in the special phenomenon of short-term variations occurring over a slow increase of the orbital period. The occurrence of mass and angular momentum loss via the outer Lagrangian point can affect the orbital period of the system significantly, but this process can be influenced, even suppressed out by the effect of rotation and tide. The mass and energy exchange occurs in the common envelope. The net result of the mass exchange process is a mass transfer from the primary to the secondary during the whole contact phase.

  15. A review of micro-contact physics, materials, and failure mechanisms in direct-contact RF MEMS switches

    Science.gov (United States)

    Basu, A.; Adams, G. G.; McGruer, N. E.

    2016-10-01

    Direct contact, ohmic MEMS switches for RF applications have several advantages over other conventional switching devices. Advantages include lower insertion loss, higher isolation, and better switching figure-of-merit (cut-off frequency). The most important aspect of a direct-contact RF MEMS switch is the metal microcontact which can dictate the lifetime and reliability of the switch. Therefore, an understanding of contact reliability is essential for developing robust MEMS switches. This paper discusses and reviews the most important work done over the past couple of decades toward understanding ohmic micro-contacts. We initially discuss the contact mechanics and multi-physics models for studying Hertzian and multi-asperity contacts. We follow this with a discussion on models and experiments for studying adhesion. We then discuss experimental setups and the development of contact test stations by various groups for accelerated testing of microcontacts, as well as for analysis of contact reliability issues. Subsequently, we analyze a number of material transfer mechanisms in microcontacts under hot and cold switching conditions. We finally review the material properties that can help determine the selection of contact materials. A trade-off between contact resistance and high reliability is almost always necessary during selection of contact material; this paper discusses how the choice of materials can help address such trade-offs.

  16. Surface Physics and Chemistry of Electrical Contact Phenomena.

    Science.gov (United States)

    1982-09-24

    EVOLUIONS Fig. 2. Electrical contact resistances and coefficients of friction vs. number of slip ring revolutions under 1 atm of wet CO2 and a 30 A brush...number is in actual contact. However, the results especially at 50 A clearly point towards melting temperatures. Further, the ’AD-A12 2 i SURFACE

  17. Attitude coordination of multi-HUG formation based on multibody system theory

    Science.gov (United States)

    Xue, Dong-yang; Wu, Zhi-liang; Qi, Er-mai; Wang, Yan-hui; Wang, Shu-xin

    2017-04-01

    Application of multiple hybrid underwater gliders (HUGs) is a promising method for large scale, long-term ocean survey. Attitude coordination has become a requisite for task execution of multi-HUG formation. In this paper, a multibody model is presented for attitude coordination among agents in the HUG formation. The HUG formation is regarded as a multi-rigid body system. The interaction between agents in the formation is described by artificial potential field (APF) approach. Attitude control torque is composed of a conservative torque generated by orientation potential field and a dissipative term related with angular velocity. Dynamic modeling of the multibody system is presented to analyze the dynamic process of the HUG formation. Numerical calculation is carried out to simulate attitude synchronization with two kinds of formation topologies. Results show that attitude synchronization can be fulfilled based on the multibody method described in this paper. It is also indicated that different topologies affect attitude control quality with respect to energy consumption and adjusting time. Low level topology should be adopted during formation control scheme design to achieve a better control effect.

  18. CLINICAL DIAGNOSIS OF SUBSCAPULARIS TENDON TEAR USING THE BEAR HUG SEMIOLOGICAL MANEUVER

    Science.gov (United States)

    Schiefer, Márcio; Júnior, Yonder Archanjo Ching-San; Silva, Sérgio Maurício; Fontenelle, César; Dias Carvalho, Marcos Genúncio; de Faria, Fabio Garcia; Franco, José Sérgio

    2015-01-01

    Objective: To evaluate the Bear Hug maneuver for clinically diagnosing subscapularis tendon tears, and compare this with other maneuvers described previously (Lift-off, Napoleon and Belly Press). Methods: Forty-nine patients with rotator cuff injuries who had undergone arthroscopy to repair the injury and had previously been assessed using the semiological maneuvers mentioned above were evaluated. Results: The diagnostic values obtained for the Bear Hug test were as follows: sensitivity 75%, specificity 56%, positive predictive value 62%, negative predictive value 70% and accuracy 65%. Conclusion: The highest sensitivity and negative predictive value values were obtained with the Bear Hug test. The highest specificity value was seen with the Lift-off test. The Belly press test gave the greatest specificity, positive predictive and accuracy values. PMID:27047870

  19. Contact mechanics and friction physical principles and applications

    CERN Document Server

    Popov, Valentin L

    2017-01-01

    This application-oriented book introduces readers to the associations and relationships between contact mechanics and friction, providing them with a deeper understanding of tribology. It addresses the related phenomena of contacts, adhesion, capillary forces, friction, lubrication, and wear from a consistent point of view. The author presents (1) methods for rough estimates of tribological quantities, (2) simple and general methods for analytical calculations, and (3) the crossover into numerical simulation methods, the goal being to convey a consistent view of tribological processes at various scales of magnitude (from nanotribology to earthquake research). The book also explores the system dynamic aspects of tribological systems, such as squeal and its suppression, as well as other types of instabilities and spatial patterns. It includes problems and worked-out solutions for the respective chapters, giving readers ample opportunity to apply the theory to practical situations and to deepen their understandi...

  20. Perceptual and not physical eye contact elicits pupillary dilation.

    Science.gov (United States)

    Honma, Motoyasu; Tanaka, Yasuto; Osada, Yoshihisa; Kuriyama, Kenichi

    2012-01-01

    Eye contact is important to share communication during social interactions. However, how accurately humans can perceive the gaze direction of others toward themselves and whether pupils dilate when humans consciously or unconsciously perceive own eyes are looked by others remain unclear. In this study, we examined the relationship between the explicit perception of looking into each other's eyes and the implicit physiological response of pupillary dilation by using an original face-to-face method. We found that humans do not correctly detect the gaze direction of others. Furthermore, one's pupils dilated when one gazed at others' eyes. Awareness of others' gaze on one's eyes, rather than the actual focusing of other's gaze on one's eyes, enhanced pupillary dilation. Therefore, physiological responses are caused not when people actually look into each other's gaze, but when the consciousness of other's gaze is activated, which suggests that eye contact often involves one-way communication.

  1. On the physically based modeling of surface tension and moving contact lines with dynamic contact angles on the continuum scale

    Science.gov (United States)

    Huber, M.; Keller, F.; Säckel, W.; Hirschler, M.; Kunz, P.; Hassanizadeh, S. M.; Nieken, U.

    2016-04-01

    The description of wetting phenomena is a challenging problem on every considerable length-scale. The behavior of interfaces and contact lines on the continuum scale is caused by intermolecular interactions like the Van der Waals forces. Therefore, to describe surface tension and the resulting dynamics of interfaces and contact lines on the continuum scale, appropriate formulations must be developed. While the Continuum Surface Force (CSF) model is well-engineered for the description of interfaces, there is still a lack of treatment of contact lines, which are defined by the intersection of an ending fluid interface and a solid boundary surface. In our approach we use a balance equation for the contact line and extend the Navier-Stokes equations in analogy to the extension of a two-phase interface in the CSF model. Since this model depicts a physically motivated approach on the continuum scale, no fitting parameters are introduced and the deterministic description leads to a dynamical evolution of the system. As verification of our theory, we show a Smoothed Particle Hydrodynamics (SPH) model and simulate the evolution of droplet shapes and their corresponding contact angles.

  2. Neuromuscular and inflammatory responses to handball small-sided games: the effects of physical contact.

    Science.gov (United States)

    Dello Iacono, A; Eliakim, A; Padulo, J; Laver, L; Ben-Zaken, S; Meckel, Y

    2016-09-30

    The aim of this study was to investigate the influence of physical contact on neuromuscular impairments and inflammatory response during handball small-sided games. Using a counterbalanced design, 12 elite male junior handball players were divided into two groups: contact (C-SSG) and no-contact (NC-SSG), performing both contact and no-contact small-sided games, in reverse order on two training sessions separated by 5 days. The methodology and rules were identical for the two SSG regimens, with the only difference being the inclusion or prohibition of upper body use for physical contacts. Upper and lower body neuromuscular performances and blood concentrations of inflammatory cytokine IL-6 were assessed before and immediately after the games. During small-sided games, video analysis was used to establish the physical contact counts. Significant differences were found in most upper and lower limbs muscles kinetic variables and in the physical contact events (all P handball players. These outcomes outline the specific physiological profile of C-SSG that, in turn, might be used by practitioners and coaches as a practical approach to strategically select exercises in athlete's overall training program.

  3. Physical model of the contact resistivity of metal-graphene junctions

    Energy Technology Data Exchange (ETDEWEB)

    Chaves, Ferney A., E-mail: ferneyalveiro.chaves@uab.cat; Jiménez, David [Departament d' Enginyeria Electrònica, Escola d' Enginyeria, Universitat Autònoma de Barcelona, Campus UAB, 08193 Bellaterra, Barcelona (Spain); Cummings, Aron W. [ICN2–Institut Català de Nanociència i Nanotecnologia, Campus UAB, 08193 Bellaterra, Barcelona (Spain); Roche, Stephan [ICN2–Institut Català de Nanociència i Nanotecnologia, Campus UAB, 08193 Bellaterra, Barcelona (Spain); ICREA, Institució Catalana de Recerca i Estudis Avançats, 08070 Barcelona (Spain)

    2014-04-28

    While graphene-based technology shows great promise for a variety of electronic applications, including radio-frequency devices, the resistance of the metal-graphene contact is a technological bottleneck for the realization of viable graphene electronics. One of the most important factors in determining the resistance of a metal-graphene junction is the contact resistivity. Despite the large number of experimental works that exist in the literature measuring the contact resistivity, a simple model of it is still lacking. In this paper, we present a comprehensive physical model for the contact resistivity of these junctions, based on the Bardeen Transfer Hamiltonian method. This model unveils the role played by different electrical and physical parameters in determining the specific contact resistivity, such as the chemical potential of interaction, the work metal-graphene function difference, and the insulator thickness between the metal and graphene. In addition, our model reveals that the contact resistivity is strongly dependent on the bias voltage across the metal-graphene junction. This model is applicable to a wide variety of graphene-based electronic devices and thus is useful for understanding how to optimize the contact resistance in these systems.

  4. HUG sets up an emergency operations centre on the CERN site

    CERN Multimedia

    Antonella Del Rosso

    2015-01-01

    Discussions between CERN and the Hôpitaux universitaires de Genève (HUG), under the aegis of the Swiss authorities, have resulted in the setting-up of an emergency operations centre on the CERN site. This will be the operations base for an emergency doctor, a medical emergency vehicle and a driver. Located on the Swiss part of the Meyrin site, close to Building 57, it will be inaugurated on 20 May.   SMUR team based at CERN. CERN’s medical staff and fire-fighters dispense first aid but in medical emergencies they are obliged to call on outside services to treat and transfer patients to hospital. In the Canton of Geneva, this service is provided by HUG via the 144 emergency line. But HUG is based on the eastern side of Geneva, a long way from CERN, and response times can be substantial. In order to improve the safety of the growing number of people on the site, CERN asked Switzerland, as one of its Host States, to help it reduce the medical emergency response t...

  5. Lactobacilli require physical contact to reduce staphylococcal TSST-1 secretion and vaginal epithelial inflammatory response.

    Science.gov (United States)

    Younes, Jessica A; Reid, Gregor; van der Mei, Henny C; Busscher, Henk J

    2016-06-01

    ITALIC! Staphylococcus aureusbiofilms can be found on vaginal epithelia, secreting toxins and causing inflammation. The co-vaginal species ITALIC! Lactobacilluscan alter staphylococcal-induced epithelial secretion of inflammatory cytokines and quench staphylococcal toxic shock syndrome toxin-1 secretion. It is hypothesized that these effects of lactobacilli require direct physical contact between lactobacilli, staphylococci and the epithelium. Indeed, lactobacilli only reduced ITALIC! S. aureus-induced inflammatory cytokine expression when allowed physical contact with vaginal epithelial cells. Furthermore, a reduction in toxic shock syndrome toxin-1 secretion only occurred when a probiotic ITALIC! Lactobacillusstrain was allowed contact, but not when being physically separated from ITALIC! S. aureus Bacterial-probe atomic force microscopy demonstrated that lactobacilli and staphylococci strongly adhere to epithelial cells, while lactobacilli adhere stronger to staphylococci than staphylococci to each other, giving lactobacilli opportunity to penetrate and reside in staphylococcal biofilms, as visualized using confocal laser scanning microscopy with fluorescence ITALIC! in situhybridization probes. These results identify that physical contact and biochemical signaling by lactobacilli are intrinsically linked mechanisms that reduce virulence of ITALIC! S. aureusbiofilm.

  6. The physics of positively biased conductors surrounded by dielectrics in contact with a plasma

    Science.gov (United States)

    Hastings, Daniel E.; Chang, Patrick

    1989-01-01

    The physics of a positively biased conductor surrounded by dielectrics in contact with plasma is investigated. It is shown that because of the presence of secondary emission from the surrounding dielectrics, the voltage of the surfaces near the conductor has three solutions. The high- and low-voltage solutions are stable, while the intermediate-voltage solution is unstable. This theory is applied to explain the snapover effect observed on high-voltage solar arrays that involve the use of highly biased surfaces in contact with the space environment.

  7. Physical model of back line-contact front-junction solar cells

    Science.gov (United States)

    Cuevas, Andres

    2013-04-01

    The analysis of advanced front-junction solar cells where the metal contact to the base region is locally formed on the back surface in the shape of lines usually requires numerical simulations. Here, we describe an approach based on a geometric formulation of carrier crowding towards the localized contact, in conjunction with a partition of the device in two distinct regions. This permits a one dimensional analysis of carrier flow, both in the region immediately adjacent to the contact and in the peripheral region surrounding it. The resulting model is simple enough to provide insight into the physics of device operation and reasonably accurate in cases of practical interest. By applying it to different cases, we identify unexpected anomalies and explain them in terms of the peculiar interplay between carrier transport and recombination that takes place in this type of solar cell.

  8. Physical and chemical analyzis of chardonnay wine with different periods of skin contact

    Directory of Open Access Journals (Sweden)

    Giriboni Pedro Pohlmann

    2016-01-01

    Full Text Available Aromatic precursors are precisely in the skin of grapes and nearby cells, and therefore there is a greater expression of the varietal aromas and aromatic precursors when the wine passes through this skin contact, as well as changes in product color. The aim of this study was to evaluate the physical and chemical characteristics of Chardonnay wine that has gone through different periods of skin contact. Chardonnay grapes, grown in vineyards located in the town of Bagé, in Campanha Gaúcha, were de-stemmed, crushed and a sulfur dioxide (50 mg/L−1 was addeded. The experimental design was a 4 × 3 factorial of 4 treatments with 3 repetitions: T1, the wine obtained directly from pressing machine; T2, skin contact for 2 days; T3, skin contact for 4 days and T4, skin contact for 6 days. After the end of malolactic fermentation wines went under − 2∘C for the tartaric stabilization. There were analyzed the variables alcohol, total acidity, volatile acidity, total polyphenols, glycerol, gluconic acid and 420, 520 and 620 colors by infrared spectroscopy method by Fourier transform and the means were compared by 5% Tukey test. There was a significant differencein variables alcohol, volatile acidit, glucanic acid and color index of 420 nm (yellow.

  9. Diagnóstico clínico da ruptura do tendão subescapular com a manobra semiológica bear hug Clinical diagnosis of subscapularis tendon tear using the bear hug semiological maneuver

    Directory of Open Access Journals (Sweden)

    Márcio Schiefer

    2012-10-01

    Full Text Available OBJETIVO: Avaliar a manobra bear hug no diagnóstico clínico da lesão do tendão subescapular e compará-la com manobras previamente descritas (lift-off, Napoleão e belly press. MÉTODOS: Foram analisados 49 pacientes com lesão do manguito rotador, submetidos à artroscopia para reparo da lesão e avaliados previamente pelas manobras semiológicas citadas. RESULTADOS: Os valores diagnósticos obtidos para o teste bear hug foram os seguintes: sensibilidade = 75%; especificidade = 56%; VPP = 62%; VPN = 70%; acurácia = 65%. CONCLUSÃO: Os maiores valores de sensibilidade e valor preditivo negativo foram obtidos com o bear hug. O maior valor de especificidade foi encontrado no teste lift-off. O teste belly press forneceu os maiores valores de especificidade, valor preditivo positivo e acurácia.OBJECTIVE: To evaluate the Bear Hug maneuver for clinically diagnosing subscapularis tendon tears, and compare this with other maneuvers described previously (Lift-off, Napoleon and Belly Press. METHODS: Forty-nine patients with rotator cuff injuries who had undergone arthroscopy to repair the injury and had previously been assessed using the semiological maneuvers mentioned above were evaluated. RESULTS: The diagnostic values obtained for the Bear Hug test were as follows: sensitivity 75%, specificity 56%, positive predictive value 62%, negative predictive value 70% and accuracy 65%. CONCLUSION: The highest sensitivity and negative predictive value values were obtained with the Bear Hug test. The highest specificity value was seen with the Lift-off test. The Belly press test gave the greatest specificity, positive predictive and accuracy values.

  10. The Freudian subject and the Maoist mind: the diaries of Hermine Hug-Hellmuth and Lei Feng.

    Science.gov (United States)

    Larson, Wendy

    2011-01-01

    Although written in vastly different cultural contexts and periods, Hermine Hug-Hellmuth's "Diary of a Young Girl" (1919) and Lei Feng's "The Diary of Lei Feng" (1963) both to a large extent were written as concept pieces, with the goal of illustrating specific theories of the self. In the case of Hug-Hellmuth, the underlying theory is the Freudian sexualized unconscious mind, whereas for Lei Feng, it is Maoist revolutionary optimism. Additionally, both diaries have unusually strong inauthentic or 'fake' aspects. Although Hug-Hellmuth never admitted to writing the diary, most critics believed it came from her pen. Lei Feng's diary was revised through his own attempts to present himself as politically progressive, by editors, and through successive political movements that focused on the person behind the diary and made him one of the most widely-recognized figures in China. As such, the diaries are excellent windows into powerful and long-lasting ideological constructs.

  11. Sexuality and Physical Contact in National Social Life, Health, and Aging Project Wave 2

    Science.gov (United States)

    McClintock, Martha K.; Waite, Linda J.

    2014-01-01

    Introduction. Wave 2 of the National Social Life, Health, and Aging Project (NSHAP) includes new measures of sexual interest and behavior, as well as new measures of the context of sexual experience and the frequency and appeal of physical contact. This is the first time many of these constructs have been measured in a nationally representative sample. Method. We describe the new measures and compare the distributions of each across gender and age groups, in some cases by partnership status. Results. Two components of sexuality decrease with age among both men and women: frequency of finding an unknown person sexually attractive and receptivity to a partner’s sexual overtures. In contrast, the inclination to make one’s self sexually attractive to others was a more complicated function of partner status, gender, and age: partnered women and unpartnered men made the most effort, with the more effortful gender’s effort decreasing with age. Both men and women find nonsexual physical contact appealing but sexual physical contact is more appealing to men than women. Finally, two fifths of men and women report dissatisfaction with their partner’s frequency of caring behaviors that make later sexual interactions pleasurable, and a fifth of women and a quarter of men who had vaginal sex in the past year report dissatisfaction with amount of foreplay. Discussion. These data offer the opportunity to characterize sexual motivation in older adulthood more precisely and richly and to examine how the context of sexual experience and the nonsexual aspects of physical intimacy correlate with sexual behavior, enjoyment, and problems. PMID:25360027

  12. Sexuality and physical contact in National Social Life, Health, and Aging Project Wave 2.

    Science.gov (United States)

    Galinsky, Adena M; McClintock, Martha K; Waite, Linda J

    2014-11-01

    Wave 2 of the National Social Life, Health, and Aging Project (NSHAP) includes new measures of sexual interest and behavior, as well as new measures of the context of sexual experience and the frequency and appeal of physical contact. This is the first time many of these constructs have been measured in a nationally representative sample. We describe the new measures and compare the distributions of each across gender and age groups, in some cases by partnership status. Two components of sexuality decrease with age among both men and women: frequency of finding an unknown person sexually attractive and receptivity to a partner's sexual overtures. In contrast, the inclination to make one's self sexually attractive to others was a more complicated function of partner status, gender, and age: partnered women and unpartnered men made the most effort, with the more effortful gender's effort decreasing with age. Both men and women find nonsexual physical contact appealing but sexual physical contact is more appealing to men than women. Finally, two fifths of men and women report dissatisfaction with their partner's frequency of caring behaviors that make later sexual interactions pleasurable, and a fifth of women and a quarter of men who had vaginal sex in the past year report dissatisfaction with amount of foreplay. These data offer the opportunity to characterize sexual motivation in older adulthood more precisely and richly and to examine how the context of sexual experience and the nonsexual aspects of physical intimacy correlate with sexual behavior, enjoyment, and problems. © The Author 2014. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  13. Physical Modeling of Contact Processes on the Cutting Tools Surfaces of STM When Turning

    Science.gov (United States)

    Belozerov, V. A.; Uteshev, M. H.

    2016-08-01

    This article describes how to create an optimization model of the process of fine turning of superalloys and steel tools from STM on CNC machines, flexible manufacturing units (GPM), machining centers. Creation of the optimization model allows you to link (unite) contact processes simultaneously on the front and back surfaces of the tool from STM to manage contact processes and the dynamic strength of the cutting tool at the top of the STM. Established optimization model of management of the dynamic strength of the incisors of the STM in the process of fine turning is based on a previously developed thermomechanical (physical, heat) model, which allows the system thermomechanical approach to choosing brands STM (domestic and foreign) for cutting tools from STM designed for fine turning of heat resistant alloys and steels.

  14. Adaptation of manipulation skills in physical contact with the environment to reference force profiles

    DEFF Research Database (Denmark)

    Abu-Dakka, Fares J.; Nemec, Bojan; Jørgensen, Jimmy A.

    2015-01-01

    We propose a new methodology for learning and adaption of manipulation skills that involve physical contact with the environment. Pure position control is unsuitable for such tasks because even small errors in the desired trajectory can cause significant deviations from the desired forces...... and torques. The proposed algorithm takes a reference Cartesian trajectory and force/torque profile as input and adapts the movement so that the resulting forces and torques match the reference profiles. The learning algorithm is based on dynamic movement primitives and quaternion representation...

  15. Cytoplasmic localization of Hug1p, a negative regulator of the MEC1 pathway, coincides with the compartmentalization of Rnr2p–Rnr4p

    Energy Technology Data Exchange (ETDEWEB)

    Ainsworth, William B. [Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA 70803 (United States); Hughes, Bridget Todd; Au, Wei Chun; Sakelaris, Sally [Genetics Branch, Center for Cancer Research, National Cancer Institute, National Institutes of Health, Bethesda, MD 20892 (United States); Kerscher, Oliver [Biology Department, The College of William and Mary, Williamsburg, VA 23185 (United States); Benton, Michael G., E-mail: benton@lsu.edu [Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA 70803 (United States); Basrai, Munira A., E-mail: basraim@mail.nih.gov [Genetics Branch, Center for Cancer Research, National Cancer Institute, National Institutes of Health, Bethesda, MD 20892 (United States)

    2013-10-04

    Highlights: •Hug1p overexpression sensitizes wild-type cells to DNA damage and hydroxyurea (HU). •Expression of Hug1p in response to HU treatment is delayed relative to Rnr3p. •MEC1 pathway genes are required for cytoplasmic localization of Hug1p. •Hug1p subcellular compartmentalization to the cytoplasm coincides with Rnr2p–Rnr4p. -- Abstract: The evolutionarily conserved MEC1 checkpoint pathway mediates cell cycle arrest and induction of genes including the RNR (Ribonucleotide reductase) genes and HUG1 (Hydroxyurea, ultraviolet, and gamma radiation) in response to DNA damage and replication arrest. Rnr complex activity is in part controlled by cytoplasmic localization of the Rnr2p–Rnr4p subunits and inactivation of negative regulators Sml1p and Dif1p upon DNA damage and hydroxyurea (HU) treatment. We previously showed that a deletion of HUG1 rescues lethality of mec1Δ and suppresses dun1Δ strains. In this study, multiple approaches demonstrate the regulatory response of Hug1p to DNA damage and HU treatment and support its role as a negative effector of the MEC1 pathway. Consistent with our hypothesis, wild-type cells are sensitive to DNA damage and HU when HUG1 is overexpressed. A Hug1 polyclonal antiserum reveals that HUG1 encodes a protein in budding yeast and its MEC1-dependent expression is delayed compared to the rapid induction of Rnr3p in response to HU treatment. Cell biology and subcellular fractionation experiments show localization of Hug1p-GFP to the cytoplasm upon HU treatment. The cytoplasmic localization of Hug1p-GFP is dependent on MEC1 pathway genes and coincides with the cytoplasmic localization of Rnr2p–Rnr4p. Taken together, the genetic interactions, gene expression, and localization studies support a novel role for Hug1p as a negative regulator of the MEC1 checkpoint response through its compartmentalization with Rnr2p–Rnr4p.

  16. The Hawk-I UDS and GOODS Survey (HUGS): Survey design and deep K-band number counts

    NARCIS (Netherlands)

    Fontana, A.; Dunlop, J. S.; Paris, D.; Targett, T. A.; Boutsia, K.; Castellano, M.; Galametz, A.; Grazian, A.; McLure, R.; Merlin, E.; Pentericci, L.; Wuyts, S.; Almaini, O.; Caputi, K.; Chary, R. R.; Cirasuolo, M.; Conselice, C. J.; Cooray, A.; Daddi, E.; Dickinson, M.; Faber, S. M.; Fazio, G.; Ferguson, H. C.; Giallongo, E.; Giavalisco, M.; Grogin, N. A.; Hathi, N.; Koekemoer, A. M.; Koo, D. C.; Lucas, R. A.; Nonino, M.; Rix, H. W.; Renzini, A.; Rosario, D.; Santini, P.; Scarlata, C.; Sommariva, V.; Stark, D. P.; van der Wel, A.; Vanzella, E.; Wild, V.; Yan, H.; Zibetti, S.

    2014-01-01

    We present the results of a new, ultra-deep, near-infrared imaging survey executed with the Hawk-I imager at the ESO VLT, of which we make all the data public. This survey, named HUGS (Hawk-I UDS and GOODS Survey), provides deep, high-quality imaging in the K and Y bands over the CANDELS UDS and GOO

  17. The Hawk-I UDS and GOODS Survey (HUGS) : Survey design and deep K-band number counts

    NARCIS (Netherlands)

    Fontana, A.; Dunlop, J. S.; Paris, D.; Targett, T. A.; Boutsia, K.; Castellano, M.; Galametz, A.; Grazian, A.; McLure, R.; Merlin, E.; Pentericci, L.; Wuyts, S.; Almaini, O.; Caputi, K.; Chary, R. -R.; Cirasuolo, M.; Conselice, C. J.; Cooray, A.; Daddi, E.; Dickinson, M.; Faber, S. M.; Fazio, G.; Ferguson, H. C.; Giallongo, E.; Giavalisco, M.; Grogin, N. A.; Hathi, N.; Koekemoer, A. M.; Koo, D. C.; Lucas, R. A.; Nonino, M.; Rix, H. W.; Renzini, A.; Rosario, D.; Santini, P.; Scarlata, C.; Sommariva, V.; Stark, D. P.; van der Wel, A.; Vanzella, E.; Wild, V.; Yan, H.; Zibetti, S.

    2014-01-01

    We present the results of a new, ultra-deep, near-infrared imaging survey executed with the Hawk-I imager at the ESO VLT, of which we make all the data (images and catalog) public. This survey, named HUGS (Hawk-I UDS and GOODS Survey), provides deep, high-quality imaging in the K and Y bands over th

  18. On the physically based modeling of surface tension and moving contact lines with dynamic contact angles on the continuum scale

    NARCIS (Netherlands)

    Huber, M.; Keller, F.; Säckel, W.; Hirschler, M.; Kunz, P.; Hassanizadeh, S.M.|info:eu-repo/dai/nl/074974424; Nieken, U.

    2016-01-01

    The description of wetting phenomena is a challenging problem on every considerable length-scale. The behavior of interfaces and contact lines on the continuum scale is caused by intermolecular interactions like the Van der Waals forces. Therefore, to describe surface tension and the resulting

  19. On the physically based modeling of surface tension and moving contact lines with dynamic contact angles on the continuum scale

    NARCIS (Netherlands)

    Huber, M.; Keller, F.; Säckel, W.; Hirschler, M.; Kunz, P.; Hassanizadeh, S.M.; Nieken, U.

    2016-01-01

    The description of wetting phenomena is a challenging problem on every considerable length-scale. The behavior of interfaces and contact lines on the continuum scale is caused by intermolecular interactions like the Van der Waals forces. Therefore, to describe surface tension and the resulting dynam

  20. ON MEASURING AMPLITUDES AND PERIODS OF PHYSICAL PENDULUM MICRO-SWINGS WITH ROLLING-CONTACT BEARING

    Directory of Open Access Journals (Sweden)

    N. N. Riznookaya

    2011-01-01

    Full Text Available The paper considers a method and an instrument for measuring amplitudes and  periods of physical pendulum oscillations with rolling-contact bearing in the regime of micro-swings when the oscillation amplitude is significantly less of an elastic contact angle. It has been established that the main factors limiting a measuring accuracy are noises of the measuring circuit, base vibration and analog-digital conversion. A new measuring methodology based on original algorithms of data processing and application of the well-known methods for statistic processing of a measuring signal is  proposed in the paper. The paper contains error estimations for measuring oscillation amplitudes justified by discreteness of a signal conversion in a photoelectric receptor and also by the influence of measuring circuit noise. The paper reveals that the applied methodologies make it possible to ensure measuring of amplitudes with an error of 0.2 second of arc and measuring of a period with an error of 10–4 s. The original measuring instrument including mechanical and optical devices and also an electric circuit of optical-to-electrical measuring signal conversion is described in the paper. 

  1. Physical Contact between the +20 km s-1 Cloud and the Galactic Circumnuclear Disk

    Science.gov (United States)

    Takekawa, Shunya; Oka, Tomoharu; Tanaka, Kunihiko

    2017-01-01

    We report the discovery of physical contact between the Galactic circumnuclear disk (CND) and an adjacent giant molecular cloud. The central 10 pc of our Galaxy has been imaged in molecular lines at millimeter wavelength using the Nobeyama Radio Observatory 45 m radio telescope. In the position-velocity maps of several high-density probe lines, we have found an emission ``bridge'' connecting the +20 km s-1 cloud (M-0.13-0.08) and the negative longitude extension of the CND. The collision between the +20 km s-1 cloud and the CND may be responsible for the formation of the bridge. This event can promote mass accretion onto the CND and/or into the inner cavity.

  2. VizieR Online Data Catalog: The Hawk-I UDS and GOODS Survey (HUGS) (Fontana+, 2014)

    Science.gov (United States)

    Fontana, A.; Dunlop, J. S.; Paris, D.; Targett, T. A.; Boutsia, K.; Castellano, M.; Galametz, A.; Grazian, A.; McLure, R.; Merlin, E.; Pentericci, L.; Wuyts, S.; Almaini, O.; Caputi, K.; Chary, R.-R.; Cirasuolo, M.; Conselice, C. J.; Cooray, A.; Daddi, E.; Dickinson, M.; Faber, S. M.; Fazio, G.; Ferguson, H. C.; Giallongo, E.; Giavalisco, M.; Grogin, N. A.; Hathi, N.; Koekemoer, A. M.; Koo, D. C.; Lucas, R. A.; Nonino, M.; Rix, H. W.; Renzini, A.; Rosario, D.; Santini, P.; Scarlata, C.; Sommariva, V.; Stark, D. P.; van der Wel, A.; Vanzella, E.; Wild, V.; Yan, H.; Zibetti, S.

    2014-10-01

    K-band galaxy number counts derived from the HUGS survey, corrected for incompleteness and other systematic effects as described in the text. Number densities are in units of galaxies per magnitude per square degree. Columns 2 and 3 assume unresolved morphologies for galaxies. Columns 4 and 5 assume a distributions of galaxy half-light radius from 0.1arcsec to 0.3arcsec. (1 data file).

  3. Physical Contact between the +20 km s^{-1} Cloud and the Galactic Circumnuclear Disk

    Science.gov (United States)

    Takekawa, Shunya; Oka, Tomoharu; Tanaka, Kunihiko

    2017-01-01

    This paper reports the discovery of evidence for physical contact between the Galactic circumnuclear disk (CND) and an exterior giant molecular cloud. The central 10 pc of our Galaxy has been imaged in the HCN J = 1–0, HCO+ J = 1–0, CS J = 2–1, H13CN J = 1–0, SiO J = 2–1, SO NJ = 23–12, and HC3N J = 11–10 lines using the Nobeyama Radio Observatory 45 m radio telescope. Based on our examination of the position–velocity maps of several high-density probe lines, we have found that an emission “bridge” may be connecting the +20 km s‑1 cloud (M–0.13–0.08) and the negative-longitude extension of the CND. Analyses of line intensity ratios imply that the chemical property of the bridge is located between the +20 km s‑1 cloud and the CND. We introduce a new interpretation that a part of the CND may be colliding with the 20 km s‑1 cloud and the collision may be responsible for the formation of the bridge. Such collisional events could promote mass accretion onto the CND or into the inner ionized cavity, which may be further tested by proper motion studies.

  4. Differences in psychological and physical health among layoff survivors: the effect of layoff contact.

    Science.gov (United States)

    Grunberg, L; Moore, S Y; Greenberg, E

    2001-01-01

    This study examined health and well-being among workers who have experienced varying types of contact with layoffs in an organization undergoing downsizing. Using survey data from a large organization employing both white- and blue-collar workers (N = 2,279), the authors argued that there are important differences among surviving workers as a function of their layoff experiences. Having any kind of personal contact with layoffs is found to be associated with less job security, more symptoms of poor health, depression, and eating changes as compared with having no layoff contact. Being laid off and rehired is associated with more work-related injuries and illnesses and missed work days due to such events than is receiving a "warn" notice, indirect contact (i.e., friends or coworkers laid off), or no contact with layoffs. Job security partially mediates the relationship between type of layoff contact experiences and health.

  5. Genotype on the Pigmentation Regulating PMEL17 Gene Affects Behavior in Chickens Raised Without Physical Contact with Conspecifics

    OpenAIRE

    Karlsson, Anna-Carin; Mormede, Pierre; Kerje, Susanne; Jensen, Per

    2011-01-01

    Chickens homozygous for the Dominant white or wild-type allele of PMEL17 were subjected to a broad phenotyping in order to detect consistent differences between genotypes. To exclude feather pecking, the chickens were individually housed without physical contact, from the day of hatching, and tested for social, aggressive, fear and exploratory behaviors, and corticosterone and testosterone levels were assessed. In a principal component analysis, 53.2% of the behavior variation was explained b...

  6. Comparison of a level of development of physical qualities of women in contact kinds of fighting single combats

    Directory of Open Access Journals (Sweden)

    Saienko V.G.

    2010-07-01

    Full Text Available Indexes which characterize the level of physical preparation of sportswomen are considered. The sportswomen of contact types of east single combats took part in research: karate, thaiboxing, taekwondo. 24 sportswomen of high qualification took part in testing: 8 - specialized in karate, 8 - thaiboxing, 8 is taekwondo. Age of sportswomen made from 16 to 25 years. Sporting experience of employments by single combats from 7 to 15 years. Dependence of level of development of physical preparedness of sportswomen is confirmed on the specific of the applied technical arsenal of receptions.

  7. The effect of physical contact on changes in fatigue markers following rugby union field-based training.

    Science.gov (United States)

    Roe, Gregory; Darrall-Jones, Joshua; Till, Kevin; Phibbs, Padraic; Read, Dale; Weakley, Jonathon; Rock, Andrew; Jones, Ben

    2017-02-26

    Repeated physical contact in rugby union is thought to contribute to post-match fatigue; however, no evidence exists on the effect of contact activity during field-based training on fatigue responses. Therefore, the purpose of this study was to examine the effect of contact during training on fatigue markers in rugby union players. Twenty academy rugby union players participated in the cross-over study. The magnitude of change in upper- and lower-body neuromuscular function (NMF), whole blood creatine kinase concentration [CK] and perception of well-being was assessed pre-training (baseline), immediately and 24 h post-training following contact and non-contact, field-based training. Training load was measured using mean heart rate, session rating of perceived exertion (sRPE) and microtechnology (Catapult Optimeye S5). The inclusion of contact during field-based training almost certainly increased mean heart rate (9.7; ±3.9%) and sRPE (42; ±29.2%) and resulted in likely and very likely greater decreases in upper-body NMF (-7.3; ±4.7% versus 2.7; ±5.9%) and perception of well-being (-8.0; ±4.8% versus  -3.4; ±2.2%) 24 h post-training, respectively, and almost certainly greater elevations in [CK] (88.2; ±40.7% versus 3.7; ±8%). The exclusion of contact from field-based training almost certainly increased running intensity (19.8; ±5%) and distance (27.5; ±5.3%), resulting in possibly greater decreases in lower-body NMF (-5.6; ±5.2% versus 2.3; ±2.4%). Practitioners should be aware of the different demands and fatigue responses of contact and non-contact, field-based training and can use this information to appropriately schedule such training in the weekly microcycle.

  8. The Hawk-I UDS and GOODS Survey (HUGS): Survey design and deep K-band number counts

    CERN Document Server

    Fontana, A; Paris, D; Targett, T A; Boutsia, K; Castellano, M; Galametz, A; Grazian, A; McLure, R; Merlin, E; Pentericci, L; Wuyts, S; Almaini, O; Caputi, K; Chary, R R; Cirasuolo, M; Conselice, C J; Cooray, A; Daddi, E; Dickinson, M; Faber, S M; Fazio, G; Ferguson, H C; Giallongo, E; Giavalisco, M; Grogin, N A; Hathi, N; Koekemoer, A M; Koo, D C; Lucas, R A; Nonino, M; Rix, H W; Renzini, A; Rosario, D; Santini, P; Scarlata, C; Sommariva, V; Stark, D P; van der Wel, A; Vanzella, E; Wild, V; Yan, H; Zibetti, S

    2014-01-01

    We present the results of a new, ultra-deep, near-infrared imaging survey executed with the Hawk-I imager at the ESO VLT, of which we make all the data public. This survey, named HUGS (Hawk-I UDS and GOODS Survey), provides deep, high-quality imaging in the K and Y bands over the CANDELS UDS and GOODS-South fields. We describe here the survey strategy, the data reduction process, and the data quality. HUGS delivers the deepest and highest quality K-band images ever collected over areas of cosmological interest, and ideally complements the CANDELS data set in terms of image quality and depth. The seeing is exceptional and homogeneous, confined to the range 0.38"-0.43". In the deepest region of the GOODS-S field, (which includes most of the HUDF) the K-band exposure time exceeds 80 hours of integration, yielding a 1-sigma magnitude limit of ~28.0 mag/sqarcsec. In the UDS field the survey matches the shallower depth of the CANDELS images reaching a 1-sigma limit per sq.arcsec of ~27.3mag in the K band and ~28.3m...

  9. Physical ageing of the contact line on colloidal particles at liquid interfaces.

    Science.gov (United States)

    Kaz, David M; McGorty, Ryan; Mani, Madhav; Brenner, Michael P; Manoharan, Vinothan N

    2011-12-04

    Young's law predicts that a colloidal sphere in equilibrium with a liquid interface will straddle the two fluids, its height above the interface defined by an equilibrium contact angle. This has been used to explain why colloids often bind to liquid interfaces, and has been exploited in emulsification, water purification, mineral recovery, encapsulation and the making of nanostructured materials. However, little is known about the dynamics of binding. Here we show that the adsorption of polystyrene microspheres to a water/oil interface is characterized by a sudden breach and an unexpectedly slow relaxation. The relaxation appears logarithmic in time, indicating that complete equilibration may take months. Surprisingly, viscous dissipation appears to play little role. Instead, the observed dynamics, which bear strong resemblance to ageing in glassy systems, agree well with a model describing activated hopping of the contact line over nanoscale surface heterogeneities. These results may provide clues to longstanding questions on colloidal interactions at an interface.

  10. In situ spectral calibration method for the impurity influx monitor (divertor) for ITER using angled physical contact fibers.

    Science.gov (United States)

    Iwamae, A; Ogawa, H; Sugie, T; Kusama, Y

    2011-03-01

    The in situ calibration method for the impurity influx monitor (divertor) is experimentally examined. The total reflectance of the optical path from the focal point of the Cassegrain telescope to the first mirror is derived using a micro retroreflector array. An optical fiber with angled physical contact (APC) connectors reduces the return edge reflection. APC fibers and a multimode coupler increase the signal-to-noise ratio by about one order compared to that of triple-branched fibers and enable measurement of the wavelength dependence of the total reflectance of the optical system even after potential deterioration of mirror surfaces reduces reflectance.

  11. Enhanced Metal Contacts to Carbon Nanotube Networks through Chemical and Physical Modification

    Science.gov (United States)

    Cox, Nathanael David

    Carbon nanotubes (CNTs) are an emerging class of nano-structured carbon materials which are currently being studied for applications which would benefit from their desirable electrical and mechanical properties. Potential benefits such as improved current density, flexure tolerance, weight savings, and even radiation tolerance have led to their implementation into numerous devices and structures, many of which are slated for use in space environments. The role of CNTs can be quite diverse, with varied CNT electronic-types and morphologies dictated by the specific application. Despite numerous CNT types and morphologies employed by these technologies, a common link between nearly all of these devices and structures is metal contact to CNTs, where the metal components often provide the link between the carbon nanotubes and the external system. In this work, a variety of CNT-metal systems were characterized in terms of metal morphology analysis and CNT-metal electrical and mechanical interactions, in response to chemical and structural modifications. A large portion of the work additionally focuses on ion irradiation environments. A diverse number of experiments related to CNT-metal interactions will be discussed. For instance, electrochemical interactions between ion-irradiated single-wall CNTs (SWCNTs) and metal salt solutions were utilized to selectively deposit Au nanoparticles (Au-NPs) onto the SWCNTs. A direct correlation was established between defect density and Au-NP areal density, resulting in a method for rapid spatial profiling of ion-irradiation induced defects in SWCNTs. The effect of ion irradiation on the CNT-metal interface was also investigated and it was found that the contact resistance of Ag-SWCNT structures increases, while the specific contact resistance decreases. The increase in overall contact resistance was attributed to increased series resistance in the system due to damage of the bulk SWCNT films, while the decrease in specific contact

  12. Application of nanotechnology in a silver/graphite contact material and optimization of its physical and mechanical properties

    Institute of Scientific and Technical Information of China (English)

    YU Haifeng; LEI Jingxuan; MA Xueming; ZHU Lihui; LU Yao; XIANG Jing; WENG Wei

    2004-01-01

    By applying nanotechnology, a new type of silver/graphite (AgC) electrical contact was fabricated and characterized. The AgC coating powders were obtained through high-energy ball milling and reducer liquid spraying-coating method. The as-prepared powders were examined by transmission electron microscope (TEM), scanning electron microscope (SEM), and X-ray diffraction (XRD). The results show that the thickness of graphite flakes milled for 10 h is about 50-60 nm and the AgC coating powders exhibit flocculent structure with quite fine and homogeneous internal rnicropores.XRD implies that the average crystalline size of silver in coating powders is about 50 nm. The mechanical and physical properties of this newly developed AgC contact made from the above-mentioned nanocrystalline powders by traditional powder metallurgy technique were measured. Compared with its counterparts made from other techniques, the properties of this new AgC contact have been optimized. High sm-face energy and high-energy interfaces of the nanocrystalline AgC coating powders provide powerful driving force for sintering densification. Moreover, the flocculent structure of the powders is also an important factor to acquire fine density ratio.

  13. Physically-based simulation of zinc oxide thin-film transistors: Contact resistance contribution on density of states

    Science.gov (United States)

    Dominguez, Miguel A.; Alcantara, Salvador; Soto, Susana

    2016-06-01

    In this work, using a physically-based simulator, the density of states DOS is modeled to reproduce the experimental electrical characteristics of ZnO TFTs fabricated by Ultrasonic Spray Pyrolysis at 200 °C. The contact resistance was experimentally extracted from the ZnO TFTs and included into the simulation, in order to separate the metal-semiconductor interface contribution from the DOS. A comparison between the modeled DOS considering the contact resistance and disregarding it is also presented. It is proposed to consider the acceptor-like states and the tail-donor states, where the deep-acceptor states have approximately an exponential form and the distribution of tail-acceptor states are sharper than the distribution of tail-donor states. The simulated electrical characteristics reproduce very well the experimental data at different channel lengths. The use of physically-based simulation can be useful to model the DOS of Oxide semiconductor films in TFTs by reproducing the experimental data.

  14. Impact of Cosmetics on the Physical Dimension and Optical Performance of Silicone Hydrogel Contact Lenses.

    Science.gov (United States)

    Luensmann, Doerte; Yu, Mili; Yang, Jeffery; Srinivasan, Sruthi; Jones, Lyndon

    2015-07-01

    To evaluate the impact of cosmetics on silicone hydrogel (SiHy) contact lens shape, lens power, and optical performance. In this in vitro experiment, 7 SiHy materials were coated with 9 marketed brands of cosmetics, including hand creams (HCs) (3), eye makeup removers (MRs) (3), and mascaras (3). Diameter, sagittal depth, and base curve were determined using the Chiltern (Optimec Limited), whereas lens power and optical performance were assessed using the Contest Plus (Rotlex). Six replicates were used for each lens and cosmetic combination. Measurements were repeated after a cleaning cycle using a one-step hydrogen peroxide solution. Makeup removers had the greatest impact on diameter, sagittal depth, and base curve, resulting in changes of up to 0.5, 0.15, and 0.77 mm, respectively. The HCs and mascaras had little impact on these parameters; however, differences were observed between lens types. Optical performance was reduced with all mascaras, and a decrease of greater than 2 units on a 0 to 10 scale (10=uniform power distribution) was seen for 5 lens types exposed to waterproof mascara (Pcosmetics (± 0.25 diopter; P>0.05). Lens cleaning resulted in some recovery of the lens parameters, and efficiency varied between cosmetics. Some eye MRs and waterproof mascaras changed the shape and optical performance of some SiHy lenses. Further research is needed to understand the clinical implications for SiHy lens wearers using cosmetics.

  15. Physical Non-Contact Communication between Microscopic Aquatic Species: Novel Experimental Evidences for an Interspecies Information Exchange

    Directory of Open Access Journals (Sweden)

    Daniel Fels

    2016-01-01

    Full Text Available Previous experiments on physical non-contact communication within same species gave rise to test for this type of communication also across the species border, which was the aim of the present study. It was found that autotrophic unicellular organisms (Euglena viridis, separated by cuvettes, affected the proliferation rate of heterotrophic unicellular organisms (Paramecium caudatum. Further, the heterotrophic unicellular organism affected also the proliferation rate of a multicellular heterotrophic organism (Rotatoria sp. and vice versa. In the case when populations (of Euglena viridis and Paramecium caudatum were shielded against electromagnetic fields in the optical spectrum from each other, no effects were measured. The results may support the notion that the organisation of ecosystems relies also on the exchange of electromagnetic fields from their constituting biosystems.

  16. Communicative interactions between visually impaired mothers and their sighted children: analysis of gaze, facial expressions, voice and physical contacts.

    Science.gov (United States)

    Chiesa, S; Galati, D; Schmidt, S

    2015-11-01

    Social and emotional development of infants and young children is largely based on the communicative interaction with their mother, or principal caretaker (Trevarthen ). The main modalities implied in this early communication are voice, facial expressions and gaze (Stern ). This study aims at analysing early mother-child interactions in the case of visually impaired mothers who do not have access to their children's gaze and facial expressions. Spontaneous play interactions between seven visually impaired mothers and their sighted children aged between 6 months and 3 years were filmed. These dyads were compared with a control group of sighted mothers and children analysing four modalities of communication and interaction regulation: gaze, physical contacts, verbal productions and facial expressions. The visually impaired mothers' facial expressions differed from the ones of sighted mothers mainly with respect to forehead movements, leading to an impoverishment of conveyed meaning. Regarding the other communicative modalities, results suggest that visually impaired mothers and their children use compensatory strategies to guaranty harmonic interaction despite the mother's impairment: whereas gaze results the main factor of interaction regulation in sighted dyads, physical contacts and verbal productions assume a prevalent role in dyads with visually impaired mothers. Moreover, visually impaired mother's children seem to be able to differentiate between their mother and sighted interaction partners, adapting differential modes of communication. The results of this study show that, in spite of the obvious differences in the modes of communication, visual impairment does not prevent a harmonious interaction with the child. © 2015 John Wiley & Sons Ltd.

  17. Physical parameter study of eight W Ursae Majoris-type contact binaries in NGC 188

    CERN Document Server

    Chen, Xiaodian; de Grijs, Richard; Zhang, Xiaobin; Xin, Yu; Wang, Kun; Luo, Changqing; Yan, Zhengzhou; Tian, Jianfeng; Sun, Jinjiang; Liu, Qili; Zhou, Qiang; Luo, Zhiquan

    2016-01-01

    We used the newly commissioned 50 cm Binocular Network (50BiN) telescope at Qinghai Station of Purple Mountain Observatory (Chinese Academy of Sciences) to observe the old open cluster NGC 188 in V and R as part of a search for variable objects. Our time-series data span a total of 36 days. Radial velocity and proper-motion selection resulted in a sample of 532 genuine cluster members. Isochrone fitting was applied to the cleaned cluster sequence, yielding a distance modulus of (m - M)0V = 11.35 \\pm 0.10 mag and a total foreground reddening of E(V - R) = 0.062 \\pm 0.002 mag. Light-curve solutions were obtained for eight W Ursae Majoris eclipsing-binary systems (W UMas) and their orbital parameters were estimated. Using the latter parameters, we estimate a distance to the W UMas which is independent of the host cluster's physical properties. Based on combined fits to six of the W UMas (EP Cep, EQ Cep, ES Cep, V369 Cep, and--for the first time--V370 Cep and V782 Cep), we obtain an average distance modulus of (m...

  18. On the zero-bias anomaly and Kondo physics in quantum point contacts near pinch-off.

    Science.gov (United States)

    Xiang, S; Xiao, S; Fuji, K; Shibuya, K; Endo, T; Yumoto, N; Morimoto, T; Aoki, N; Bird, J P; Ochiai, Y

    2014-03-26

    We investigate the linear and non-linear conductance of quantum point contacts (QPCs), in the region near pinch-off where Kondo physics has previously been connected to the appearance of the 0.7 feature. In studies of seven different QPCs, fabricated in the same high-mobility GaAs/AlGaAs heterojunction, the linear conductance is widely found to show the presence of the 0.7 feature. The differential conductance, on the other hand, does not generally exhibit the zero-bias anomaly (ZBA) that has been proposed to indicate the Kondo effect. Indeed, even in the small subset of QPCs found to exhibit such an anomaly, the linear conductance does not always follow the universal temperature-dependent scaling behavior expected for the Kondo effect. Taken collectively, our observations demonstrate that, unlike the 0.7 feature, the ZBA is not a generic feature of low-temperature QPC conduction. We furthermore conclude that the mere observation of the ZBA alone is insufficient evidence for concluding that Kondo physics is active. While we do not rule out the possibility that the Kondo effect may occur in QPCs, our results appear to indicate that its observation requires a very strict set of conditions to be satisfied. This should be contrasted with the case of the 0.7 feature, which has been apparent since the earliest experimental investigations of QPC transport.

  19. Muon radiography and deformation analysis of the lava dome formed by the 1944 eruption of Usu, Hokkaido--contact between high-energy physics and volcano physics--.

    Science.gov (United States)

    K M Tanaka, Hiroyuki; Yokoyama, Izumi

    2008-01-01

    Lava domes are one of the conspicuous topographic features on volcanoes. The subsurface structure of the lava dome is important to discuss its formation mechanism. In the 1944 eruption of Volcano Usu, Hokkaido, a new lava dome was formed at its eastern foot. After the completion of the lava dome, various geophysical methods were applied to the dome to study its subsurface structure, but resulted in a rather ambiguous conclusion. Recently, from the results of the levelings, which were repeated during the eruption, "pseudo growth curves" of the lava dome were obtained. The curves suggest that the lava dome has a bulbous shape. In the present work, muon radiography, which previously proved effective in imaging the internal structure of Volcano Asama, has been applied to the Usu lava dome. The muon radiography measures the distribution of the "density length" of volcanic bodies when detectors are arranged properly. The result obtained is consistent with the model deduced from the pseudo growth curves. The measurement appears to afford useful method to clarify the subsurface structure of volcanoes and its temporal changes, and in its turn to discuss volcanic processes. This is a point of contact between high-energy physics and volcano physics.

  20. Rapid and sensitive detection of Plesiomonas shigelloides by loop-mediated isothermal amplification of the hugA gene.

    Directory of Open Access Journals (Sweden)

    Shuang Meng

    Full Text Available Plesiomonas shigelloides is one of the causative agents of human gastroenteritis, with increasing number of reports describing such infections in recent years. In this study, the hugA gene was chosen as the target to design loop-mediated isothermal amplification (LAMP assays for the rapid, specific, and sensitive detection of P. shigelloides. The performance of the assay with reference plasmids and spiked human stools as samples was evaluated and compared with those of quantitative PCR (qPCR. No false-positive results were observed for the 32 non-P. shigelloides strains used to evaluate assay specificity. The limit of detection for P. shigelloides was approximately 20 copies per reaction in reference plasmids and 5×10(3 CFU per gram in spiked human stool, which were more sensitive than the results of qPCR. When applied in human stool samples spiked with 2 low levels of P. shigelloides, the LAMP assays achieved accurate detection after 6-h enrichment. In conclusion, the LAMP assay developed in this study is a valuable method for rapid, cost-effective, and simple detection of P. shigelloides in basic clinical and field laboratories in the rural areas of China.

  1. Genetic modifiers of sickle cell anemia in the BABY HUG cohort: influence on laboratory and clinical phenotypes.

    Science.gov (United States)

    Sheehan, Vivien A; Luo, Zhaoyu; Flanagan, Jonathan M; Howard, Thad A; Thompson, Bruce W; Wang, Winfred C; Kutlar, Abdullah; Ware, Russell E

    2013-07-01

    The recently completed BABY HUG trial investigated the safety and efficacy of hydroxyurea in infants with sickle cell anemia (SCA). To investigate the effects of known genetic modifiers, genomic DNA on 190 randomized subjects were analyzed for alpha thalassemia, beta-globin haplotype, polymorphisms affecting endogenous fetal hemoglobin (HbF) levels (XmnI, BCL11A, and HBS1L-MYB), UGT1A1 promoter polymorphisms, and the common G6PD A(-) mutation. At study entry, infants with alpha thalassemia trait had significantly lower mean corpuscular volume, total bilirubin, and absolute reticulocyte count. Beta-globin haplotypes associated with milder disease had significantly higher hemoglobin and %HbF. BCL11A and XmnI polymorphisms had significant effects on baseline HbF, while UGT1A1 promoter polymorphisms significantly influenced baseline serum bilirubin. At study exit, subjects randomized to placebo still exhibited laboratory effects of alpha thalassemia and other modifiers, while those assigned hydroxyurea had treatment effects that exceeded most genetic influences. The pain phenotype was influenced by HbF modifiers in both treatment groups. These data document that genetic polymorphisms do modify laboratory and clinical phenotypes even in very young patients with SCA. The hydroxyurea effects are more potent, however, indicating that treatment criteria should not be limited to certain genetic subsets, and supporting the use of hydroxyurea for all young patients with SCA.

  2. Physical properties and evolutionary status of the W-subtype contact binary V502 Oph with a stellar companion

    Science.gov (United States)

    Xiao, Zhou; Shengbang, Qian; Binghe, Huang; Hao, Li; Jia, Zhang

    2016-10-01

    Multi-color (B, V, Rc, Ic) CCD photometric light curves of the contact binary V502 Oph are analyzed using the Wilson-Devinney program. The solutions reveal that V502 Oph is a W-subtype contact (f = 35.3%) binary system. The temperature difference between its two components is 240 K and the more massive star has a lower surface temperature. A cool spot is added in our model to account for the light curves' asymmetry (O'Connell effect) and a third light is detected for the first time in the light curves' modeling. Combining the orbital inclination (i = 76.4°) with the published mass function of V502 Oph, the absolute physical parameters of the two components are determined, which are M1 = 0.46(±0.02) M⊙, M2 = 1.37(±0.02) M⊙, R1 = 0.94(±0.01) R⊙, R2 = 1.51(±0.01) R⊙, L1 = 1.13(±0.02) L⊙, and L2 = 2.49(±0.03) L⊙. The formation and the evolutionary status of V502 Oph are discussed. All photoelectric and CCD times of light minimum about V502 Oph are gathered and its orbital period variations are analyzed. The results show that the orbital period of V502 Oph is decreasing continuously at a rate of dP/dt = -1.69 × 10-7 d yr-1,which corresponds to a conservative mass transfer rate of dM2/dt = -3.01 × 10- 8 M⊙ yr-1. The light-travel time effect is due to the presence of a close-in tertiary component with a period of P3 = 18.7 yr and an amplitute of 0.00402 d. V502 Oph is an ideal target to test the formation and evolution theories of binary and multiple systems in which the light curves, the O - C curve and spectroscopic observations are comprehensively researched.

  3. Physical properties and evolutionary status of the W-subtype contact binary V502 Oph with a stellar companion

    Science.gov (United States)

    Xiao, Zhou; Shengbang, Qian; Binghe, Huang; Hao, Li; Jia, Zhang

    2016-12-01

    Multi-color (B, V, Rc, Ic) CCD photometric light curves of the contact binary V502 Oph are analyzed using the Wilson-Devinney program. The solutions reveal that V502 Oph is a W-subtype contact (f = 35.3%) binary system. The temperature difference between its two components is 240 K and the more massive star has a lower surface temperature. A cool spot is added in our model to account for the light curves' asymmetry (O'Connell effect) and a third light is detected for the first time in the light curves' modeling. Combining the orbital inclination (i = 76.4°) with the published mass function of V502 Oph, the absolute physical parameters of the two components are determined, which are M1 = 0.46(±0.02) M⊙, M2 = 1.37(±0.02) M⊙, R1 = 0.94(±0.01) R⊙, R2 = 1.51(±0.01) R⊙, L1 = 1.13(±0.02) L⊙, and L2 = 2.49(±0.03) L⊙. The formation and the evolutionary status of V502 Oph are discussed. All photoelectric and CCD times of light minimum about V502 Oph are gathered and its orbital period variations are analyzed. The results show that the orbital period of V502 Oph is decreasing continuously at a rate of dP/dt = -1.69 × 10-7 d yr-1,which corresponds to a conservative mass transfer rate of dM2/dt = -3.01 × 10- 8 M⊙ yr-1. The light-travel time effect is due to the presence of a close-in tertiary component with a period of P3 = 18.7 yr and an amplitute of 0.00402 d. V502 Oph is an ideal target to test the formation and evolution theories of binary and multiple systems in which the light curves, the O - C curve and spectroscopic observations are comprehensively researched.

  4. Quality of life in haemophilia A: Hemophilia Utilization Group Study Va (HUGS-Va).

    Science.gov (United States)

    Poon, J-L; Zhou, Z-Y; Doctor, J N; Wu, J; Ullman, M M; Ross, C; Riske, B; Parish, K L; Lou, M; Koerper, M A; Gwadry-Sridhar, F; Forsberg, A D; Curtis, R G; Johnson, K A

    2012-09-01

    This study describes health-related quality of life (HRQoL) of persons with haemophilia A in the United States (US) and determines associations between self-reported joint pain, motion limitation and clinically evaluated joint range of motion (ROM), and between HRQoL and ROM. As part of a 2-year cohort study, we collected baseline HRQoL using the SF-12 (adults) and PedsQL (children), along with self-ratings of joint pain and motion limitation, in persons with factor VIII deficiency recruited from six Haemophilia Treatment Centres (HTCs) in geographically diverse regions of the US. Clinically measured joint ROM measurements were collected from medical charts of a subset of participants. Adults (N = 156, mean age: 33.5 ± 12.6 years) had mean physical and mental component scores of 43.4 ± 10.7 and 50.9 ± 10.1, respectively. Children (N = 164, mean age: 9.7 ± 4.5 years) had mean total PedsQL, physical functioning, and psychosocial health scores of 85.9 ± 13.8, 89.5 ± 15.2, and 84.1 ± 15.3, respectively. Persons with more severe haemophilia and higher self-reported joint pain and motion limitation had poorer scores, particularly in the physical aspects of HRQoL. In adults, significant correlations (P < 0.01) were found between ROM measures and both self-reported measures. Except among those with severe disease, children and adults with haemophilia have HRQoL scores comparable with those of the healthy US population. The physical aspects of HRQoL in both adults and children with haemophilia A in the US decrease with increasing severity of illness. However, scores for mental aspects of HRQoL do not differ between severity groups. These findings are comparable with those from studies in European and Canadian haemophilia populations.

  5. The effects of self-directed home exercise with serial telephone contacts on physical functions and quality of life in elderly people at high risk of locomotor dysfunction.

    Science.gov (United States)

    Aoki, Kana; Sakuma, Mayumi; Ogisho, Noriyuki; Nakamura, Kozo; Chosa, Etsuo; Endo, Naoto

    2015-01-01

    Exercise is essential for maintaining quality of life (QOL) in elderly individuals. However, adherence to exercise programs is low. Here, we assessed the effectiveness of a self-directed home exercise program with serial telephone contacts to encourage exercise adherence among elderly individuals at high risk of locomotor dysfunction. We recruited community-dwelling adults (ァ65 years) in Niigata, Japan, who were targets of the long-term care prevention project for locomotor dysfunction but did not participate in the government-sponsored prevention programs. The study was conducted from November 2011 to October 2012. Participants received exercise instruction and performed exercises independently for 3 months with serial telephone contacts. The single-leg stance and five-times sit-to-stand tests were used to assess physical function. The SF-8 was used to measure health-related QOL. Ninety-seven participants were enrolled in the study, representing 2.5% of eligible people;87 completed the intervention. Scores from physical function tests were significantly improved by the intervention, as were 7 of eight SF-8 subscales. Adherence was 85.4% for the single-leg standing exercise and 82.1% for squatting. Thus, self-directed home exercise with serial telephone contacts improved physical function and health-related QOL, representing a promising model for preventing the need for long-term care due to locomotor dysfunction.

  6. Contact dermatitis

    Science.gov (United States)

    Dermatitis - contact; Allergic dermatitis; Dermatitis - allergic; Irritant contact dermatitis; Skin rash - contact dermatitis ... There are 2 types of contact dermatitis. Irritant dermatitis: This ... with acids, alkaline materials such as soaps and detergents , ...

  7. Free Hugs: Dinâmicas de troca, dádiva e estranhamento na intervenção urbana

    Directory of Open Access Journals (Sweden)

    Fernando Gil Paiva Martins

    2012-06-01

    Full Text Available Este artigo visa analisar a campanha mundial Free Hugs (Abraços Grátis, que se transformou de ação individual no ano de 2001 na Austrália em mobilização urbana desde 2003 com os flash mobs inventados em Nova York e depois realizados em escala global. A partir disso, explorar as dinâmicas de troca simbólica no ato de oferecer enfaticamente abraços grátis a partir do conceito de dádiva de Marcel Mauss, tendo como condição histórica o atual estágio de desenvolvimento do capitalismo. Na difusão viral de ideias pelo ciberespaço, que permite mostrar como as cidades tornaram-se nós de produção e reprodução de informações, toma-se a campanha do Free Hugs em Cuiabá, nas bordas do Pantanal em Mato Grosso, em sua potência de mobilização social e como ilustração deste processo de trocas nos fluxos da globalização.

  8. Transport physics and device modeling of zinc oxide thin-film transistors. Pt. II: Contact Resistance in Short Channel Devices

    NARCIS (Netherlands)

    Torricelli, F.; Meijboom, J.R.; Smits, E.; Tripathi, A.K.; Gelinck, G.H.; Colalongo, L.; Kovacs-Vajna, Z.M.; Leeuw, D. de; Cantatore, E.

    2011-01-01

    Abstract—Short-channel zinc oxide (ZnO) thin-film transistors (TFTs) are investigated in a wide range of temperatures and bias conditions. Scaling down the channel length, the TFT performance is seriously affected by contact resistances, which depend on gate voltage and temperature. To account for t

  9. 移动接触线的物理力学研究%Physical mechanics investigations of moving contact lines

    Institute of Scientific and Technical Information of China (English)

    袁泉子; 沈文豪; 赵亚溥

    2016-01-01

    移动接触线,指两种互不相溶的流体在固体表面形成移动的三相接触区域。移动接触区域跨越多个尺度,其中三相物质之间的相互作用影响着整个流场的动力学特征。由于在能源、航天、生物等领域中的重要应用和迅速发展,移动接触线在新的应用背景下发展了新的难题。标度分析是度量接触线自相似扩展的重要手段。本文以移动接触线的标度关系为主线,介绍了“力–电–热–化学”多场耦合环境下,亲水内角、微柱阵列、可溶解固体、水力压裂滞后区等复杂几何结构的刚性/柔性固体表面,采用物理力学方法对于移动接触线动力学属性研究的进展。通过跨尺度实验研究、大规模分子动力学模拟和分子动理论/水动力学理论相结合的方法,发现了类固体前驱膜、单分子前驱水链、锯齿形接触线等新现象。从原子尺度的界面结构到连续尺度的流动特性,讨论了移动接触线自相似扩展的标度关系,以及其驱动来源、能量耗散、边界条件等物理机制和规律,为多物理场中的“Huh-Scriven佯谬”探索了解答,为移动接触线的前景和应用提出了展望。%Moving contact line (MCL) is the triple-phase region (TPR) formed by two impermeable fluids moving on a solid surface. TPR covers multiple scales, where the inter-actions among phases influence the dynamic behaviors of the entire fluid field. Owing to its significant applications and rapid development in the fields of energy, aerospace, biology, etc., new challenges emerge in MCL problems. Scaling analysis is an important tool to char-acterize self-similar expansion of the MCL. Focusing on the scaling relations of MCLs, we review the progresses of physical mechanics investigations under“mechano-electro-thermal-chemical” multifield coupled conditions for MCL on rigid/flexible solid surfaces with com-plex geometries, including

  10. The benefits of in-group contact through physical activity involvement for health and well-being among Korean immigrants

    Directory of Open Access Journals (Sweden)

    Junhyoung Kim

    2014-05-01

    Full Text Available This qualitative study is designed to examine the benefits of physical activity involvement with members of the same ethnic group. For this study, Korean immigrants who were members of Korean physical activity clubs such as badminton and tennis were selected as participants. Using a constructive grounded theory methodology, three themes were identified as benefits of physical activity involvement: (1 the experience of psychological well-being, (2 the creation of a unique cultural world, and (3 the facilitation of physical activity involvement. The findings of this study suggest that Korean immigrant participants gained various social, cultural, and psychological benefits by engaging in activities with other Korean immigrants.

  11. The benefits of in-group contact through physical activity involvement for health and well-being among Korean immigrants

    Science.gov (United States)

    Kim, Junhyoung; Heo, Jinmoo; Kim, Jun

    2014-01-01

    This qualitative study is designed to examine the benefits of physical activity involvement with members of the same ethnic group. For this study, Korean immigrants who were members of Korean physical activity clubs such as badminton and tennis were selected as participants. Using a constructive grounded theory methodology, three themes were identified as benefits of physical activity involvement: (1) the experience of psychological well-being, (2) the creation of a unique cultural world, and (3) the facilitation of physical activity involvement. The findings of this study suggest that Korean immigrant participants gained various social, cultural, and psychological benefits by engaging in activities with other Korean immigrants. PMID:24875239

  12. Language Contact.

    Science.gov (United States)

    Nelde, Peter Hans

    1995-01-01

    Examines the phenomenon of language contact and recent trends in linguistic contact research, which focuses on language use, language users, and language spheres. Also discusses the role of linguistic and cultural conflicts in language contact situations. (13 references) (MDM)

  13. Repeated sensory contact with aggressive mice rapidly leads to an anticipatory increase in core body temperature and physical activity that precedes the onset of aversive responding.

    Science.gov (United States)

    Pardon, Marie-Christine; Kendall, David A; Pérez-Diaz, Fernando; Duxon, Mark S; Marsden, Charles A

    2004-08-01

    The present study investigated whether the 'psychological threat' induced by sensory contact with an aggressive conspecific would be a sufficient factor in inducing behavioural and physiological disturbances. Repeated sensory contact with an aggressive mouse (social threat) in a partitioned cage was compared with repeated exposure to a novel partitioned cage in male NMRI mice. We first examined parameters of stress responsiveness (body weight, plasma corticosterone levels, frequency of self-grooming and defecation). The temperature and physical activity responses to stress were also recorded during and after the 4 weeks of stress using radiotelemetry. Finally, cognitivo-emotional performance was assessed after acute stress and 2 and 4 weeks of stress by measuring decision making, sequential alternation performance and behaviour in the elevated T-maze. Social threat had a greater impact than novel cage exposure on most parameters of stress responsiveness, although mice did not habituate to either stressor. Social threat rapidly led to an anticipatory rise in core body temperature and physical activity before the scheduled stress sessions. Such anticipation developed within the first week and persisted for 9 days after ending the stress procedure. Some memory impairment in the sequential alternation test was found in stressed mice, independent of the stressor. After 4 weeks of stress, inhibitory avoidance in the elevated T-maze was enhanced in socially stressed mice and reduced in novel cage mice. The sustained anticipation of stress in the social threat group preceded aversive responding. It remains to be established whether anticipation contributes to the development of aversive responses.

  14. Physical characterization of amorphous In-Ga-Zn-O thin-film transistors with direct-contact asymmetric graphene electrode

    Directory of Open Access Journals (Sweden)

    Jaewook Jeong

    2014-09-01

    Full Text Available High performance a-IGZO thin-film transistors (TFTs are fabricated using an asymmetric graphene drain electrode structure. A-IGZO TFTs (channel length = 3 μm were successfully demonstrated with a saturation field-effect mobility of 6.6 cm2/Vs without additional processes between the graphene and a-IGZO layer. The graphene/a-IGZO junction exhibits Schottky characteristics and the contact property is affected not only by the Schottky barrier but also by the parasitic resistance from the depletion region under the graphene electrode. Therefore, to utilize the graphene layer as S/D electrodes for a-IGZO TFTs, an asymmetric electrode is essential, which can be easily applied to the conventional pixel electrode structure.

  15. Colors and contact dermatitis.

    Science.gov (United States)

    Bonamonte, Domenico; Foti, Caterina; Romita, Paolo; Vestita, Michelangelo; Angelini, Gianni

    2014-01-01

    The diagnosis of skin diseases relies on several clinical signs, among which color is of paramount importance. In this review, we consider certain clinical presentations of both eczematous and noneczematous contact dermatitis in which color plays a peculiar role orientating toward the right diagnosis. The conditions that will be discussed include specific clinical-morphologic subtypes of eczematous contact dermatitis, primary melanocytic, and nonmelanocytic contact hyperchromia, black dermographism, contact chemical leukoderma, and others. Based on the physical, chemical, and biologic factors underlying a healthy skin color, the various skin shades drawing a disease picture are thoroughly debated, stressing their etiopathogenic origins and histopathologic aspects.

  16. Intraspecies Variability Affects Heterotypic Biofilms of Porphyromonas gingivalis and Prevotella intermedia: Evidences of Strain-Dependence Biofilm Modulation by Physical Contact and by Released Soluble Factors.

    Science.gov (United States)

    Barbosa, Graziela Murta; Colombo, Andrea Vieira; Rodrigues, Paulo Henrique; Simionato, Maria Regina Lorenzetti

    2015-01-01

    It is well known that strain and virulence diversity exist within the population structure of Porphyromonas gingivalis. In the present study we investigate intra- and inter-species variability in biofilm formation of Porphyromonas gingivalis and partners Prevotella intermedia and Prevotella nigrescens. All strains tested showed similar hydrophobicity, except for P. gingivalis W83 which has roughly half of the hydrophobicity of P. gingivalis ATCC33277. An intraspecies variability in coaggregation of P. gingivalis with P. intermedia was also found. The association P. gingivalis W83/P. intermedia 17 produced the thickest biofilm and strain 17 was prevalent. In a two-compartment system P. gingivalis W83 stimulates an increase in biomass of strain 17 and the latter did not stimulate the growth of P. gingivalis W83. In addition, P. gingivalis W83 also stimulates the growth of P. intermedia ATCC25611 although strain W83 was prevalent in the association with P. intermedia ATCC25611. P. gingivalis ATCC33277 was prevalent in both associations with P. intermedia and both strains of P. intermedia stimulate the growth of P. gingivalis ATCC33277. FISH images also showed variability in biofilm structure. Thus, the outcome of the association P. gingivalis/P. intermedia seems to be strain-dependent, and both soluble factors and physical contact are relevant. The association P. gingivalis-P. nigrescens ATCC33563 produced larger biomass than each monotypic biofilm, and P. gingivalis was favored in consortia, while no differences were found in the two-compartment system. Therefore, in consortia P. gingivalis-P. nigrescens physical contact seems to favor P. gingivalis growth. The intraspecies variability found in our study suggests strain-dependence in ability of microorganisms to recognize molecules in other bacteria which may further elucidate the dysbiosis event during periodontitis development giving additional explanation for periodontal bacteria, such as P. gingivalis and P

  17. Connecting grain-scale physics to macroscopic granular flow behavior using discrete contact-dynamics simulations, centrifuge experiments, and continuum modeling

    Science.gov (United States)

    Reitz, Meredith; Stark, Colin; Hung, Chi-Yao; Smith, Breannan; Grinspin, Eitan; Capart, Herve; Li, Liming; Crone, Timothy; Hsu, Leslie; Ling, Hoe

    2014-05-01

    A complete theoretical understanding of geophysical granular flow is essential to the reliable assessment of landslide and debris flow hazard and for the design of mitigation strategies, but several key challenges remain. Perhaps the most basic is a general treatment of the processes of internal energy dissipation, which dictate the runout velocity and the shape and scale of the affected area. Currently, dissipation is best described by macroscopic, empirical friction coefficients only indirectly related to the grain-scale physics. Another challenge is describing the forces exerted at the boundaries of the flow, which dictate the entrainment of further debris and the erosion of cohesive surfaces. While the granular effects on these boundary forces have been shown to be large compared to predictions from continuum approximations, the link between granular effects and erosion or entrainment rates has not been settled. Here we present preliminary results of a multi-disciplinary study aimed at improving our understanding of granular flow energy dissipation and boundary forces, through an effort to connect grain-scale physics to macroscopic behaviors. Insights into grain-scale force distributions and energy dissipation mechanisms are derived from discrete contact-dynamics simulations. Macroscopic erosion and flow behaviors are documented from a series of granular flow experiments, in which a rotating drum half-filled with grains is placed within a centrifuge payload, in order to drive effective gravity levels up to ~100g and approach the forces present in natural systems. A continuum equation is used to characterize the flowing layer depth and velocity resulting from the force balance between the down-slope pull of gravity and the friction at the walls. In this presentation we will focus on the effect of granular-specific physics such as force chain networks and grain-grain collisions, derived from the contact dynamics simulations. We will describe our efforts to

  18. Muon radiography and deformation analysis of the lava dome formed by the 1944 eruption of Usu, Hokkaido —Contact between high-energy physics and volcano physics—

    Science.gov (United States)

    TANAKA, Hiroyuki K. M.; YOKOYAMA, Izumi

    2008-01-01

    Lava domes are one of the conspicuous topographic features on volcanoes. The subsurface structure of the lava dome is important to discuss its formation mechanism. In the 1944 eruption of Volcano Usu, Hokkaido, a new lava dome was formed at its eastern foot. After the completion of the lava dome, various geophysical methods were applied to the dome to study its subsurface structure, but resulted in a rather ambiguous conclusion. Recently, from the results of the levelings, which were repeated during the eruption, “pseudo growth curves” of the lava dome were obtained. The curves suggest that the lava dome has a bulbous shape. In the present work, muon radiography, which previously proved effective in imaging the internal structure of Volcano Asama, has been applied to the Usu lava dome. The muon radiography measures the distribution of the “density length” of volcanic bodies when detectors are arranged properly. The result obtained is consistent with the model deduced from the pseudo growth curves. The measurement appears to afford useful method to clarify the subsurface structure of volcanoes and its temporal changes, and in its turn to discuss volcanic processes. This is a point of contact between high-energy physics and volcano physics. PMID:18941290

  19. Allergic Contact Dermatitis

    Directory of Open Access Journals (Sweden)

    Meltem Önder

    2009-03-01

    Full Text Available Allergic contact dermatitis is the delayed type hypersensitivity reaction to exogenous agents. Allergic contact dermatitis may clinically present acutely after allergen exposure and initial sensitization in a previously sensitized individual. Acute phase is characterized by erythematous, scaly plaques. In severe cases vesiculation and bullae in exposed areas are very characteristic. Repeated or continuous exposure of sensitized individual with allergen result in chronic dermatitis. Lichenification, erythematous plaques, hyperkeratosis and fissuring may develop in chronic patients. Allergic contact dermatitis is very common dermatologic problem in dermatology daily practice. A diagnosis of contact dermatitis requires the careful consideration of patient history, physical examination and patch testing. The knowledge of the clinical features of the skin reactions to various contactans is important to make a correct diagnosis of contact dermatitis. It can be seen in every age, in children textile product, accessories and touch products are common allergens, while in adults allergic contact dermatitis may be related with topical medicaments. The contact pattern of contact dermatitis depends on fashion and local traditions as well. The localization of allergic reaction should be evaluated and patients’ occupation and hobbies should be asked. The purpose of this review is to introduce to our collaques up dated allergic contact dermatitis literatures both in Turkey and in the World.

  20. Maintaining Affection Despite Pain: Daily Associations Between Physical Affection and Sexual and Relationship Well-Being in Women with Genito-Pelvic Pain.

    Science.gov (United States)

    Vannier, Sarah A; Rosen, Natalie O; Mackinnon, Sean P; Bergeron, Sophie

    2017-10-01

    Provoked vestibulodynia (PVD) is a recurrent, genito-pelvic pain condition that affects 8-12 % of women and has negative implications for sexual and relationship functioning. Many women with PVD report avoiding physical affection because they are concerned that affectionate behavior will lead to painful sexual activity. In community samples, physical affection is associated with improved sexual and relational well-being; however, no research has assessed the influence of physical affection on well-being in women with PVD. The current study examined day-to-day, within-person associations between affectionate behavior (hugging/kissing, cuddling) and sexual satisfaction, relationship satisfaction, sexual functioning, and pain intensity in women with PVD. Seventy women diagnosed with PVD completed an 8-week daily survey. Data were analyzed using multilevel modeling. All outcomes were assessed on days involving sexual activity (n = 401 days). Physical affection was assessed on days with and without sexual activity. Hugging/kissing was positively associated with sexual satisfaction, relationship satisfaction, and sexual functioning within any given day and when predicting the next day. Hugging/kissing was unrelated to pain intensity. Cuddling was not associated with any outcomes. Results persisted for affection that occurred on days with and without sexual activity. Findings suggest physical affection is beneficial for the sexual and relationship well-being of women with PVD. These results may inform interventions that encourage women coping with PVD to engage in more daily physical affection with their partners.

  1. PHYSICS

    CERN Multimedia

    P. Sphicas

    There have been three physics meetings since the last CMS week: “physics days” on March 27-29, the Physics/ Trigger week on April 23-27 and the most recent physics days on May 22-24. The main purpose of the March physics days was to finalize the list of “2007 analyses”, i.e. the few topics that the physics groups will concentrate on for the rest of this calendar year. The idea is to carry out a full physics exercise, with CMSSW, for select physics channels which test key features of the physics objects, or represent potential “day 1” physics topics that need to be addressed in advance. The list of these analyses was indeed completed and presented in the plenary meetings. As always, a significant amount of time was also spent in reviewing the status of the physics objects (reconstruction) as well as their usage in the High-Level Trigger (HLT). The major event of the past three months was the first “Physics/Trigger week” in Apri...

  2. Moving contact lines in a pure-vapor atmosphere: a singularity-free description in the sole framework of classical physics

    CERN Document Server

    Rednikov, Alexey

    2012-01-01

    We here show that, even in the absence of "regularizing" microscopic effects (viz. slip at the wall or the disjoining pressure/precursor films), no singularities in fact arise for a moving contact line surrounded by the pure vapor of the liquid considered. There are no evaporation-related singularities either even should the substrate be superheated. We consider, within the lubrication approximation and a classical one-sided model, a contact line advancing/receding at a constant velocity, or immobile, and starting abruptly at a (formally) bare solid surface with a zero or finite contact angle.

  3. Metal semiconductor contacts and devices

    CERN Document Server

    Cohen, Simon S; Einspruch, Norman G

    1986-01-01

    VLSI Electronics Microstructure Science, Volume 13: Metal-Semiconductor Contacts and Devices presents the physics, technology, and applications of metal-semiconductor barriers in digital integrated circuits. The emphasis is placed on the interplay among the theory, processing, and characterization techniques in the development of practical metal-semiconductor contacts and devices.This volume contains chapters that are devoted to the discussion of the physics of metal-semiconductor interfaces and its basic phenomena; fabrication procedures; and interface characterization techniques, particularl

  4. PHYSICS

    CERN Multimedia

    D. Acosta

    2010-01-01

    A remarkable amount of progress has been made in Physics since the last CMS Week in June given the exponential growth in the delivered LHC luminosity. The first major milestone was the delivery of a variety of results to the ICHEP international conference held in Paris this July. For this conference, CMS prepared 15 Physics Analysis Summaries on physics objects and 22 Summaries on new and interesting physics measurements that exploited the luminosity recorded by the CMS detector. The challenge was incorporating the largest batch of luminosity that was delivered only days before the conference (300 nb-1 total). The physics covered from this initial running period spanned hadron production measurements, jet production and properties, electroweak vector boson production, and even glimpses of the top quark. Since then, the accumulated integrated luminosity has increased by a factor of more than 100, and all groups have been working tremendously hard on analysing this dataset. The September Physics Week was held ...

  5. The interaction of Arabidopsis with Piriformospora indica shifts from initial transient stress induced by fungus-released chemical mediators to a mutualistic interaction after physical contact of the two symbionts

    OpenAIRE

    Vahabi, K.; Sherameti, I.; Bakshi, M.; Mrozinska, A.; Ludwig, A.; M. Reichelt; Oelmüller, R

    2015-01-01

    Background Piriformospora indica, an endophytic fungus of Sebacinales, colonizes the roots of many plant species including Arabidopsis thaliana. The symbiotic interaction promotes plant performance, growth and resistance/tolerance against abiotic and biotic stress. Results We demonstrate that exudated compounds from the fungus activate stress and defense responses in the Arabidopsis roots and shoots before the two partners are in physical contact. They induce stomata closure, stimulate reacti...

  6. PHYSICS

    CERN Multimedia

    J. Incandela

    There have been numerous developments in the physics area since the September CMS week. The biggest single event was the Physics/Trigger week in the end of Octo¬ber, whereas in terms of ongoing activities the “2007 analyses” went into high gear. This was in parallel with participation in CSA07 by the physics groups. On the or¬ganizational side, the new conveners of the physics groups have been selected, and a new database for man¬aging physics analyses has been deployed. Physics/Trigger week The second Physics-Trigger week of 2007 took place during the week of October 22-26. The first half of the week was dedicated to working group meetings. The ple¬nary Joint Physics-Trigger meeting took place on Wednesday afternoon and focused on the activities of the new Trigger Studies Group (TSG) and trigger monitoring. Both the Physics and Trigger organizations are now focused on readiness for early data-taking. Thus, early trigger tables and preparations for calibr...

  7. PHYSICS

    CERN Multimedia

    P. Sphicas

    The CPT project came to an end in December 2006 and its original scope is now shared among three new areas, namely Computing, Offline and Physics. In the physics area the basic change with respect to the previous system (where the PRS groups were charged with detector and physics object reconstruction and physics analysis) was the split of the detector PRS groups (the old ECAL-egamma, HCAL-jetMET, Tracker-btau and Muons) into two groups each: a Detector Performance Group (DPG) and a Physics Object Group. The DPGs are now led by the Commissioning and Run Coordinator deputy (Darin Acosta) and will appear in the correspond¬ing column in CMS bulletins. On the physics side, the physics object groups are charged with the reconstruction of physics objects, the tuning of the simulation (in collaboration with the DPGs) to reproduce the data, the provision of code for the High-Level Trigger, the optimization of the algorithms involved for the different physics analyses (in collaboration with the analysis gr...

  8. PHYSICS

    CERN Document Server

    Submitted by

    Physics Week: plenary meeting on physics groups plans for startup (14–15 May 2008) The Physics Objects (POG) and Physics Analysis (PAG) Groups presented their latest developments at the plenary meeting during the Physics Week. In the presentations particular attention was given to startup plans and readiness for data-taking. Many results based on the recent cosmic run were shown. A special Workshop on SUSY, described in a separate section, took place the day before the plenary. At the meeting, we had also two special DPG presentations on “Tracker and Muon alignment with CRAFT” (Ernesto Migliore) and “Calorimeter studies with CRAFT” (Chiara Rovelli). We had also a report from Offline (Andrea Rizzi) and Computing (Markus Klute) on the San Diego Workshop, described elsewhere in this bulletin. Tracking group (Boris Mangano). The level of sophistication of the tracking software increased significantly over the last few months: V0 (K0 and Λ) reconstr...

  9. Equilibrium contact angle or the most-stable contact angle?

    Science.gov (United States)

    Montes Ruiz-Cabello, F J; Rodríguez-Valverde, M A; Cabrerizo-Vílchez, M A

    2014-04-01

    It is well-established that the equilibrium contact angle in a thermodynamic framework is an "unattainable" contact angle. Instead, the most-stable contact angle obtained from mechanical stimuli of the system is indeed experimentally accessible. Monitoring the susceptibility of a sessile drop to a mechanical stimulus enables to identify the most stable drop configuration within the practical range of contact angle hysteresis. Two different stimuli may be used with sessile drops: mechanical vibration and tilting. The most stable drop against vibration should reveal the changeless contact angle but against the gravity force, it should reveal the highest resistance to slide down. After the corresponding mechanical stimulus, once the excited drop configuration is examined, the focus will be on the contact angle of the initial drop configuration. This methodology needs to map significantly the static drop configurations with different stable contact angles. The most-stable contact angle, together with the advancing and receding contact angles, completes the description of physically realizable configurations of a solid-liquid system. Since the most-stable contact angle is energetically significant, it may be used in the Wenzel, Cassie or Cassie-Baxter equations accordingly or for the surface energy evaluation.

  10. Prioritized Contact Transport Stream

    Science.gov (United States)

    Hunt, Walter Lee, Jr. (Inventor)

    2015-01-01

    A detection process, contact recognition process, classification process, and identification process are applied to raw sensor data to produce an identified contact record set containing one or more identified contact records. A prioritization process is applied to the identified contact record set to assign a contact priority to each contact record in the identified contact record set. Data are removed from the contact records in the identified contact record set based on the contact priorities assigned to those contact records. A first contact stream is produced from the resulting contact records. The first contact stream is streamed in a contact transport stream. The contact transport stream may include and stream additional contact streams. The contact transport stream may be varied dynamically over time based on parameters such as available bandwidth, contact priority, presence/absence of contacts, system state, and configuration parameters.

  11. PHYSICS

    CERN Multimedia

    D. Futyan

    A lot has transpired on the “Physics” front since the last CMS Bulletin. The summer was filled with preparations of new Monte Carlo samples based on CMSSW_3, the finalization of all the 10 TeV physics analyses [in total 50 analyses were approved] and the preparations for the Physics Week in Bologna. A couple weeks later, the “October Exercise” commenced and ran through an intense two-week period. The Physics Days in October were packed with a number of topics that are relevant to data taking, in a number of “mini-workshops”: the luminosity measurement, the determination of the beam spot and the measurement of the missing transverse energy (MET) were the three main topics.   Physics Week in Bologna The second physics week in 2009 took place in Bologna, Italy, on the week of Sep 7-11. The aim of the week was to review and establish (we hoped) the readiness of CMS to do physics with the early collisions at the LHC. The agenda of the...

  12. PHYSICS

    CERN Multimedia

    D. Futyan

    A lot has transpired on the “Physics” front since the last CMS Bulletin. The summer was filled with preparations of new Monte Carlo samples based on CMSSW_3, the finalization of all the 10 TeV physics analyses [in total 50 analyses were approved] and the preparations for the Physics Week in Bologna. A couple weeks later, the “October Exercise” commenced and ran through an intense two-week period. The Physics Days in October were packed with a number of topics that are relevant to data taking, in a number of “mini-workshops”: the luminosity measurement, the determination of the beam spot and the measurement of the missing transverse energy (MET) were the three main topics.  Physics Week in Bologna The second physics week in 2009 took place in Bologna, Italy, on the week of Sep 7-11. The aim of the week was to review and establish how ready we are to do physics with the early collisions at the LHC. The agenda of the week was thus pac...

  13. PHYSICS

    CERN Multimedia

    Joe Incandela

    There have been two plenary physics meetings since the December CMS week. The year started with two workshops, one on the measurements of the Standard Model necessary for “discovery physics” as well as one on the Physics Analysis Toolkit (PAT). Meanwhile the tail of the “2007 analyses” is going through the last steps of approval. It is expected that by the end of January all analyses will have converted to using the data from CSA07 – which include the effects of miscalibration and misalignment. January Physics Days The first Physics Days of 2008 took place on January 22-24. The first two days were devoted to comprehensive re¬ports from the Detector Performance Groups (DPG) and Physics Objects Groups (POG) on their planning and readiness for early data-taking followed by approvals of several recent studies. Highlights of POG presentations are included below while the activities of the DPGs are covered elsewhere in this bulletin. January 24th was devo...

  14. PHYSICS

    CERN Multimedia

    J. Incandela

    The all-plenary format of the CMS week in Cyprus gave the opportunity to the conveners of the physics groups to present the plans of each physics analysis group for tackling early physics analyses. The presentations were complete, so all are encouraged to browse through them on the Web. There is a wealth of information on what is going on, by whom and on what basis and priority. The CMS week was followed by two CMS “physics events”, the ICHEP08 days and the physics days in July. These were two weeks dedicated to either the approval of all the results that would be presented at ICHEP08, or to the review of all the other Monte-Carlo based analyses that were carried out in the context of our preparations for analysis with the early LHC data (the so-called “2008 analyses”). All this was planned in the context of the beginning of a ramp down of these Monte Carlo efforts, in anticipation of data.  The ICHEP days are described below (agenda and talks at: http://indic...

  15. Physics

    CERN Document Server

    Cullen, Katherine

    2005-01-01

    Defined as the scientific study of matter and energy, physics explains how all matter behaves. Separated into modern and classical physics, the study attracts both experimental and theoretical physicists. From the discovery of the process of nuclear fission to an explanation of the nature of light, from the theory of special relativity to advancements made in particle physics, this volume profiles 10 pioneers who overcame tremendous odds to make significant breakthroughs in this heavily studied branch of science. Each chapter contains relevant information on the scientist''s childhood, research, discoveries, and lasting contributions to the field and concludes with a chronology and a list of print and Internet references specific to that individual.

  16. ALLERGIC CONTACT DERMATITIS

    Directory of Open Access Journals (Sweden)

    Trisna Yuliharti Tersinanda

    2013-07-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE Allergic contact dermatitis is an immunologic reaction that tends to involve the surrounding skin and may even spread beyond affected sites. This skin disease is one of the more frequent, and costly dermatologic problems. Recent data from United Kingdom and United States suggest that the percentage of occupational contact dermatitis due to allergy may be much higher, thus raising the economic impact of occupational allergic contact dermatitis. There is not enough data about the epidemiology of allergic contact dermatitis in Indonesia, however based on research that include beautician in Denpasar, about 27,6 percent had side effect of cosmetics, which is 25,4 percent of it manifested as allergic contact dermatitis. Diagnosis of allergic contact dermatitis is based on anamnesis, physical examination, patch test, and this disease should be distinguished from other eczematous skin disease. The management is prevention of allergen exposure, symptomatic treatment, and physicochemical barrier /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  17. PHYSICS

    CERN Multimedia

    Guenther Dissertori

    The time period between the last CMS week and this June was one of intense activity with numerous get-together targeted at addressing specific issues on the road to data-taking. The two series of workshops, namely the “En route to discoveries” series and the “Vertical Integration” meetings continued.   The first meeting of the “En route to discoveries” sequence (end 2007) had covered the measurements of the Standard Model signals as necessary prerequisite to any claim of signals beyond the Standard Model. The second meeting took place during the Feb CMS week and concentrated on the commissioning of the Physics Objects, whereas the third occurred during the April Physics Week – and this time the theme was the strategy for key new physics signatures. Both of these workshops are summarized below. The vertical integration meetings also continued, with two DPG-physics get-togethers on jets and missing ET and on electrons and photons. ...

  18. PHYSICS

    CERN Multimedia

    Chris Hill

    2012-01-01

    The months that have passed since the last CMS Bulletin have been a very busy and exciting time for CMS physics. We have gone from observing the very first 8TeV collisions produced by the LHC to collecting a dataset of the collisions that already exceeds that recorded in all of 2011. All in just a few months! Meanwhile, the analysis of the 2011 dataset and publication of the subsequent results has continued. These results come from all the PAGs in CMS, including searches for the Higgs boson and other new phenomena, that have set the most stringent limits on an ever increasing number of models of physics beyond the Standard Model including dark matter, Supersymmetry, and TeV-scale gravity scenarios, top-quark physics where CMS has overtaken the Tevatron in the precision of some measurements, and bottom-quark physics where CMS made its first discovery of a new particle, the Ξ*0b baryon (candidate event pictured below). Image 2:  A Ξ*0b candidate event At the same time POGs and PAGs...

  19. PHYSICS

    CERN Multimedia

    D. Acosta

    2011-01-01

    Since the last CMS Week, all physics groups have been extremely active on analyses based on the full 2010 dataset, with most aiming for a preliminary measurement in time for the winter conferences. Nearly 50 analyses were approved in a “marathon” of approval meetings during the first two weeks of March, and the total number of approved analyses reached 90. The diversity of topics is very broad, including precision QCD, Top, and electroweak measurements, the first observation of single Top production at the LHC, the first limits on Higgs production at the LHC including the di-tau final state, and comprehensive searches for new physics in a wide range of topologies (so far all with null results unfortunately). Most of the results are based on the full 2010 pp data sample, which corresponds to 36 pb-1 at √s = 7 TeV. This report can only give a few of the highlights of a very rich physics program, which is listed below by physics group...

  20. Irritant contact dermatitis.

    Science.gov (United States)

    Ale, Iris S; Maibach, Howard I

    2014-01-01

    Irritant contact dermatitis (ICD) is the most common form of contact dermatitis. It represents the cutaneous response to the toxic/physical effects of a wide variety of environmental agents. Nowadays, it is recognized that irritancy does not represent a single monomorphous entity but rather a complex biologic syndrome with diverse pathophysiology and clinical manifestations. The clinical presentation is highly variable depending on several factors, including properties and strength of the irritant, dose, duration and frequency of exposure, environmental factors, and skin susceptibility. The pathophysiological mechanism depends on activation of the innate immune system and involves skin barrier disruption, cellular changes, and release of proinflammatory mediators that directly recruit and activate T lymphocytes. The diagnosis of irritant contact dermatitis is often clinical, and involves a comprehensive history and examination, as well as the exclusion of allergic contact dermatitis with patch testing. Recent advances in understanding the pathogenesis as well as better awareness of the clinical significance of ICD will lead to a improved care for our patients.

  1. PHYSICS

    CERN Multimedia

    the PAG conveners

    2011-01-01

    The delivered LHC integrated luminosity of more than 1 inverse femtobarn by summer and more than 5 by the end of 2011 has been a gold mine for the physics groups. With 2011 data, we have submitted or published 14 papers, 7 others are in collaboration-wide review, and 75 Physics Analysis Summaries have been approved already. They add to the 73 papers already published based on the 2010 and 2009 datasets. Highlights from each physics analysis group are described below. Heavy ions Many important results have been obtained from the first lead-ion collision run in 2010. The published measurements include the first ever indications of Υ excited state suppression (PRL synopsis), long-range correlation in PbPb, and track multiplicity over a wide η range. Preliminary results include the first ever measurement of isolated photons (showing no modification), J/ψ suppression including the separation of the non-prompt component, further study of jet fragmentation, nuclear modification factor...

  2. PHYSICS

    CERN Multimedia

    C. Hill

    2012-01-01

      The period since the last CMS Bulletin has been historic for CMS Physics. The pinnacle of our physics programme was an observation of a new particle – a strong candidate for a Higgs boson – which has captured worldwide interest and made a profound impact on the very field of particle physics. At the time of the discovery announcement on 4 July, 2012, prominent signals were observed in the high-resolution H→γγ and H→ZZ(4l) modes. Corroborating excess was observed in the H→W+W– mode as well. The fermionic channel analyses (H→bb, H→ττ), however, yielded less than the Standard Model (SM) expectation. Collectively, the five channels established the signal with a significance of five standard deviations. With the exception of the diphoton channel, these analyses have all been updated in the last months and several new channels have been added. With improved analyses and more than twice the i...

  3. PHYSICS

    CERN Multimedia

    D. Acosta

    2010-01-01

    The Physics Groups are actively engaged on analyses of the first data from the LHC at 7 TeV, targeting many results for the ICHEP conference taking place in Paris this summer. The first large batch of physics approvals is scheduled for this CMS Week, to be followed by four more weeks of approvals and analysis updates leading to the start of the conference in July. Several high priority analysis areas were organized into task forces to ensure sufficient coverage from the relevant detector, object, and analysis groups in the preparation of these analyses. Already some results on charged particle correlations and multiplicities in 7 TeV minimum bias collisions have been approved. Only one small detail remains before ICHEP: further integrated luminosity delivered by the LHC! Beyond the Standard Model measurements that can be done with these data, the focus changes to the search for new physics at the TeV scale and for the Higgs boson in the period after ICHEP. Particle Flow The PFT group is focusing on the ...

  4. PHYSICS

    CERN Multimedia

    C. Hill

    2012-01-01

      2012 has started off as a very busy year for the CMS Physics Groups. Planning for the upcoming higher luminosity/higher energy (8 TeV) operation of the LHC and relatively early Rencontres de Moriond are the high-priority activities for the group at the moment. To be ready for the coming 8-TeV data, CMS has made a concerted effort to perform and publish analyses on the 5 fb−1 dataset recorded in 2011. This has resulted in the submission of 16 papers already, including nine on the search for the Higgs boson. In addition, a number of preliminary results on the 2011 dataset have been released to the public. The Exotica and SUSY groups approved several searches for new physics in January, such as searches for W′ and exotic highly ionising particles. These were highlighted at a CERN seminar given on 24th  January. Many more analyses, from all the PAGs, including the newly formed SMP (Standard Model Physics) and FSQ (Forward and Small-x QCD), were approved in February. The ...

  5. PHYSICS

    CERN Multimedia

    Darin Acosta

    2010-01-01

    The collisions last year at 900 GeV and 2.36 TeV provided the long anticipated collider data to the CMS physics groups. Quite a lot has been accomplished in a very short time. Although the delivered luminosity was small, CMS was able to publish its first physics paper (with several more in preparation), and commence the commissioning of physics objects for future analyses. Many new performance results have been approved in advance of this CMS Week. One remarkable outcome has been the amazing agreement between out-of-the-box data with simulation at these low energies so early in the commissioning of the experiment. All of this is testament to the hard work and preparation conducted beforehand by many people in CMS. These analyses could not have happened without the dedicated work of the full collaboration on building and commissioning the detector, computing, and software systems combined with the tireless work of many to collect, calibrate and understand the data and our detector. To facilitate the efficien...

  6. PHYSICS

    CERN Multimedia

    L. Demortier

    Physics-wise, the CMS week in December was dominated by discussions of the analyses that will be carried out in the “next six months”, i.e. while waiting for the first LHC collisions.  As presented in December, analysis approvals based on Monte Carlo simulation were re-opened, with the caveat that for this work to be helpful to the goals of CMS, it should be carried out using the new software (CMSSW_2_X) and associated samples.  By the end of the week, the goal for the physics groups was set to be the porting of our physics commissioning methods and plans, as well as the early analyses (based an integrated luminosity in the range 10-100pb-1) into this new software. Since December, the large data samples from CMSSW_2_1 were completed. A big effort by the production group gave a significant number of events over the end-of-year break – but also gave out the first samples with the fast simulation. Meanwhile, as mentioned in December, the arrival of 2_2 meant that ...

  7. Space time manifolds and contact structures

    Directory of Open Access Journals (Sweden)

    K. L. Duggal

    1990-01-01

    Full Text Available A new class of contact manifolds (carring a global non-vanishing timelike vector field is introduced to establish a relation between spacetime manifolds and contact structures. We show that odd dimensional strongly causal (in particular, globally hyperbolic spacetimes can carry a regular contact structure. As examples, we present a causal spacetime with a non regular contact structure and a physical model [Gödel Universe] of Homogeneous contact manifold. Finally, we construct a model of 4-dimensional spacetime of general relativity as a contact CR-submanifold.

  8. Lipstick Induced Contact Leucoderma

    OpenAIRE

    Gupta Lalit Kumar; Jain Suresh Kumar; Khare Ashok Kumar

    2001-01-01

    Lipstick is a commonly used cosmetic. Its use may sometimes lead to contact dermatitis. Contact leucoderma to lipsticks however, is not common. We report a patient developing contact leucoderma to lipstick in association with contact dermatitis.

  9. Lipstick Induced Contact Leucoderma

    Directory of Open Access Journals (Sweden)

    Gupta Lalit Kumar

    2001-01-01

    Full Text Available Lipstick is a commonly used cosmetic. Its use may sometimes lead to contact dermatitis. Contact leucoderma to lipsticks however, is not common. We report a patient developing contact leucoderma to lipstick in association with contact dermatitis.

  10. PHYSICS

    CERN Multimedia

    J. D'Hondt

    The Electroweak and Top Quark Workshop (16-17th of July) A Workshop on Electroweak and Top Quark Physics, dedicated on early measurements, took place on 16th-17th July. We had more than 40 presentations at the Workshop, which was an important milestone for 2007 physics analyses in the EWK and TOP areas. The Standard Model has been tested empirically by many previous experiments. Observables which are nowadays known with high precision will play a major role for data-based CMS calibrations. A typical example is the use of the Z to monitor electron and muon reconstruction in di-lepton inclusive samples. Another example is the use of the W mass as a constraint for di-jets in the kinematic fitting of top-quark events, providing information on the jet energy scale. The predictions of the Standard Model, for what concerns proton collisions at the LHC, are accurate to a level that the production of W/Z and top-quark events can be used as a powerful tool to commission our experiment. On the other hand the measure...

  11. PHYSICS

    CERN Multimedia

    C. Hill

    2013-01-01

    In the period since the last CMS Bulletin, the LHC – and CMS – have entered LS1. During this time, CMS Physics Analysis Groups have performed more than 40 new analyses, many of which are based on the complete 8 TeV dataset delivered by the LHC in 2012 (and in some cases on the full Run 1 dataset). These results were shown at, and well received by, several high-profile conferences in the spring of 2013, including the inaugural meeting of the Large Hadron Collider    Physics Conference (LHCP) in Barcelona, and the 26th International Symposium on Lepton Photon Interactions at High Energies (LP) in San Francisco. In parallel, there have been significant developments in preparations for Run 2 of the LHC and on “future physics” studies for both Phase 1 and Phase 2 upgrades of the CMS detector. The Higgs analysis group produced five new results for LHCP including a new H-to-bb search in VBF production (HIG-13-011), ttH with H to γ&ga...

  12. PHYSICS

    CERN Multimedia

    C. Hill

    2013-01-01

    The period since the last CMS bulletin has seen the end of proton collisions at a centre-of-mass energy 8 TeV, a successful proton-lead collision run at 5 TeV/nucleon, as well as a “reference” proton run at 2.76 TeV. With these final LHC Run 1 datasets in hand, CMS Physics Analysis Groups have been busy analysing these data in preparation for the winter conferences. Moreover, despite the fact that the pp run only concluded in mid-December (and there was consequently less time to complete data analyses), CMS again made a strong showing at the Rencontres de Moriond in La Thuile (EW and QCD) where nearly 40 new results were presented. The highlight of these preliminary results was the eagerly anticipated updated studies of the properties of the Higgs boson discovered in July of last year. Meanwhile, preparations for Run 2 and physics performance studies for Phase 1 and Phase 2 upgrade scenarios are ongoing. The Higgs analysis group produced updated analyses on the full Run 1 dataset (~25 f...

  13. PHYSICS

    CERN Multimedia

    Christopher Hill

    2013-01-01

    Since the last CMS Bulletin, the CMS Physics Analysis Groups have completed more than 70 new analyses, many of which are based on the complete Run 1 dataset. In parallel the Snowmass whitepaper on projected discovery potential of CMS for HL-LHC has been completed, while the ECFA HL-LHC future physics studies has been summarised in a report and nine published benchmark analyses. Run 1 summary studies on b-tag and jet identification, quark-gluon discrimination and boosted topologies have been documented in BTV-13-001 and JME-13-002/005/006, respectively. The new tracking alignment and performance papers are being prepared for submission as well. The Higgs analysis group produced several new results including the search for ttH with H decaying to ZZ, WW, ττ+bb (HIG-13-019/020) where an excess of ~2.5σ is observed in the like-sign di-muon channel, and new searches for high-mass Higgs bosons (HIG-13-022). Search for invisible Higgs decays have also been performed both using the associ...

  14. EDITORIAL: Close contact Close contact

    Science.gov (United States)

    Demming, Anna

    2010-07-01

    The development of scanning probe techniques, such as scanning tunnelling microscopy [1], has often been touted as the catalyst for the surge in activity and progress in nanoscale science and technology. Images of nanoscale structural detail have served as an invaluable investigative resource and continue to fascinate with the fantastical reality of an intricate nether world existing all around us, but hidden from view of the naked eye by a disparity in scale. As is so often the case, the invention of the scanning tunnelling microscope heralded far more than just a useful new apparatus, it demonstrated the scope for exploiting the subtleties of electronic contact. The shrinking of electronic devices has been a driving force for research into molecular electronics, in which an understanding of the nature of electronic contact at junctions is crucial. In response, the number of experimental techniques in molecular electronics has increased rapidly in recent years. Scanning tunnelling microscopes have been used to study electron transfer through molecular films on a conducting substrate, and the need to monitor the contact force of scanning tunnelling electrodes led to the use of atomic force microscopy probes coated in a conducting layer as studied by Cui and colleagues in Arizona [2]. In this issue a collaboration of researchers at Delft University and Leiden University in the Netherlands report a new device architecture for the independent mechanical and electrostatic tuning of nanoscale charge transport, which will enable thorough studies of molecular transport in the future [3]. Scanning probes can also be used to pattern surfaces, such as through spatially-localized Suzuki and Heck reactions in chemical scanning probe lithography. Mechanistic aspects of spatially confined Suzuki and Heck chemistry are also reported in this issue by researchers in Oxford [4]. All these developments in molecular electronics fabrication and characterization provide alternative

  15. PHYSICS

    CERN Multimedia

    V.Ciulli

    2011-01-01

    The main programme of the Physics Week held between 16th and 20th May was a series of topology-oriented workshops on di-leptons, di-photons, inclusive W, and all-hadronic final states. The goal of these workshops was to reach a common understanding for the set of objects (ID, cleaning...), the handling of pile-up, calibration, efficiency and purity determination, as well as to revisit critical common issues such as the trigger. Di-lepton workshop Most analysis groups use a di-lepton trigger or a combination of single and di-lepton triggers in 2011. Some groups need to collect leptons with as low PT as possible with strong isolation and identification requirements as for Higgs into WW at low mass, others with intermediate PT values as in Drell-Yan studies, or high PT as in the Exotica group. Electron and muon reconstruction, identification and isolation, was extensively described in the workshop. For electrons, VBTF selection cuts for low PT and HEEP cuts for high PT were discussed, as well as more complex d...

  16. Fingertip contact influences human postural control

    Science.gov (United States)

    Jeka, J. J.; Lackner, J. R.

    1994-01-01

    Touch and pressure stimulation of the body surface can strongly influence apparent body orientation, as well as the maintenance of upright posture during quiet stance. In the present study, we investigated the relationship between postural sway and contact forces at the fingertip while subjects touched a rigid metal bar. Subjects were tested in the tandem Romberg stance with eyes open or closed under three conditions of fingertip contact: no contact, touch contact (postural sway when compared to the no contact, eyes closed condition. Body sway and fingertip forces were essentially in phase with force contact, suggesting that fingertip contact forces are physically counteracting body sway. Time delays between body sway and fingertip forces were much larger with light touch contact, suggesting that the fingertip is providing information that allows anticipatory innervation of musculature to reduce body sway. The results are related to observations on precision grip as well as the somatosensory, proprioceptive, and motor mechanisms involved in the reduction of body sway.

  17. A unique mating strategy without physical contact during fertilization in Bombay Night Frogs (Nyctibatrachus humayuni with the description of a new form of amplexus and female call

    Directory of Open Access Journals (Sweden)

    Bert Willaert

    2016-06-01

    Full Text Available Anurans show the highest diversity in reproductive modes of all vertebrate taxa, with a variety of associated breeding behaviours. One striking feature of anuran reproduction is amplexus. During this process, in which the male clasps the female, both individuals’ cloacae are juxtaposed to ensure successful external fertilization. Several types of amplexus have evolved with the diversification of anurans, and secondary loss of amplexus has been reported in a few distantly related taxa. Within Nyctibatrachus, a genus endemic to the Western Ghats of India, normal axillary amplexus, a complete loss of amplexus, and intermediate forms of amplexus have all been suggested to occur, but many species remain unstudied. Here, we describe the reproductive behaviour of N. humayuni, including a new type of amplexus. The dorsal straddle, here defined as a loose form of contact in which the male sits on the dorsum of the female prior to oviposition but without clasping her, is previously unreported for anurans. When compared to known amplexus types, it most closely resembles the form of amplexus observed in Mantellinae. Furthermore, we prove that, opposed to the situation in most anurans, male semen release happens before egg deposition. We hypothesize that the male ejaculates on the female’s dorsum and that sperm subsequently runs from her back and hind legs before fertilizing the eggs. A second feature characterizing anuran breeding is the advertisement call, mostly produced solely by males. Despite recent descriptions of several new Nyctibatrachus species, few studies have explored their vocal repertoire. We describe both the male advertisement call and a female call for N. humayuni. The presence of a female call has not been reported within Nyctibatrachidae, and has been reported in less than 0.5% of anuran species. Altogether, our results highlight a striking diversity and several unique aspects of Nyctibatrachus breeding behaviour.

  18. A unique mating strategy without physical contact during fertilization in Bombay Night Frogs (Nyctibatrachus humayuni) with the description of a new form of amplexus and female call

    Science.gov (United States)

    Suyesh, Robin; Garg, Sonali; Giri, Varad B.; Bee, Mark A.

    2016-01-01

    Anurans show the highest diversity in reproductive modes of all vertebrate taxa, with a variety of associated breeding behaviours. One striking feature of anuran reproduction is amplexus. During this process, in which the male clasps the female, both individuals’ cloacae are juxtaposed to ensure successful external fertilization. Several types of amplexus have evolved with the diversification of anurans, and secondary loss of amplexus has been reported in a few distantly related taxa. Within Nyctibatrachus, a genus endemic to the Western Ghats of India, normal axillary amplexus, a complete loss of amplexus, and intermediate forms of amplexus have all been suggested to occur, but many species remain unstudied. Here, we describe the reproductive behaviour of N. humayuni, including a new type of amplexus. The dorsal straddle, here defined as a loose form of contact in which the male sits on the dorsum of the female prior to oviposition but without clasping her, is previously unreported for anurans. When compared to known amplexus types, it most closely resembles the form of amplexus observed in Mantellinae. Furthermore, we prove that, opposed to the situation in most anurans, male semen release happens before egg deposition. We hypothesize that the male ejaculates on the female’s dorsum and that sperm subsequently runs from her back and hind legs before fertilizing the eggs. A second feature characterizing anuran breeding is the advertisement call, mostly produced solely by males. Despite recent descriptions of several new Nyctibatrachus species, few studies have explored their vocal repertoire. We describe both the male advertisement call and a female call for N. humayuni. The presence of a female call has not been reported within Nyctibatrachidae, and has been reported in less than 0.5% of anuran species. Altogether, our results highlight a striking diversity and several unique aspects of Nyctibatrachus breeding behaviour. PMID:27326376

  19. Physical Modeling of Gate-Controlled Schottky Barrier Lowering of Metal-Graphene Contacts in Top-Gated Graphene Field-Effect Transistors.

    Science.gov (United States)

    Mao, Ling-Feng; Ning, Huansheng; Huo, Zong-Liang; Wang, Jin-Yan

    2015-12-17

    A new physical model of the gate controlled Schottky barrier height (SBH) lowering in top-gated graphene field-effect transistors (GFETs) under saturation bias condition is proposed based on the energy conservation equation with the balance assumption. The theoretical prediction of the SBH lowering agrees well with the experimental data reported in literatures. The reduction of the SBH increases with the increasing of gate voltage and relative dielectric constant of the gate oxide, while it decreases with the increasing of oxide thickness, channel length and acceptor density. The magnitude of the reduction is slightly enhanced under high drain voltage. Moreover, it is found that the gate oxide materials with large relative dielectric constant (>20) have a significant effect on the gate controlled SBH lowering, implying that the energy relaxation of channel electrons should be taken into account for modeling SBH in GFETs.

  20. Investigation of the behavior of VOCs in ground water across fine- and coarse-grained geological contacts using a medium-scale physical model

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, F.; Chiarappa, M.L.

    1998-03-01

    One of the serious impediments to the remediation of ground water contaminated with volatile organic compounds (VOCs) is that the VOCs are retarded with respect to the movement of the ground water. Although the processes that result in VOC retardation are poorly understood, we have developed a conceptual model that includes several retarding mechanisms. These include adsorption to inorganic surfaces, absorption to organic carbon, and diffusion into areas of immobile waters. This project was designed to evaluate the relative contributions of these mechanisms; by improving our understanding, we hope to inspire new remediation technologies or approaches. Our project consisted of a series of column experiments designed to measure the retardation, in different geological media, of four common ground water VOCs (chloroform, carbon tetrachloride, trichloroethylene, and tetrachloroethylene) which have differing physical and chemical characteristics. It also included a series of diffusion parameters that constrain the model, we compared the data from these experiments to the output of a computational model.

  1. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Vision and Daily Eye Drops After One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume Contacts May Contain Chemicals ...

  2. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume ... use of colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses ...

  3. Affective and Behavioral Responses to Robot-Initiated Social Touch: Toward Understanding the Opportunities and Limitations of Physical Contact in Human–Robot Interaction

    Directory of Open Access Journals (Sweden)

    Christian J. A. M. Willemse

    2017-05-01

    Full Text Available Social touch forms an important aspect of the human non-verbal communication repertoire, but is often overlooked in human–robot interaction. In this study, we investigated whether robot-initiated touches can induce physiological, emotional, and behavioral responses similar to those reported for human touches. Thirty-nine participants were invited to watch a scary movie together with a robot that spoke soothing words. In the Touch condition, these words were accompanied by a touch on the shoulder. We hypothesized that this touch—as compared with no touch—could (H1 attenuate physiological [heart rate (variability, skin conductance, cortisol, and respiration rate] and subjective stress responses that were caused by the movie. Moreover, we expected that a touch could (H2 decrease aversion toward the movie, (H3 increase positive perceptions of the robot (e.g., its appearance and one’s attitude toward it, and (H4 increase compliance to the robot’s request to make a monetary donation. Although the movie did increase arousal as intended, none of the hypotheses could be confirmed. Our findings suggest that merely simulating a human touching action with the robot’s limbs is insufficient to elicit physiological, emotional, and behavioral responses in this specific context and with this amount of participants. To inform future research on the opportunities and limitations of robot-initiated touch, we reflect on our methodology and identify dimensions that may play a role in physical human–robot interactions: e.g., the robot’s touching behavior, its appearance and behavior, the user’s personality, the body location where the touch is applied, and the (social context of the interaction. Social touch can only become an integral and effective part of a robot’s non-verbal communication repertoire, when we better understand if, and under which boundary conditions such touches can elicit responses in humans.

  4. Study on the Physical Parameters of the Contact Binary Based On ASAS Survey Data%基于ASAS巡天数据研究相接双星的物理参数

    Institute of Scientific and Technical Information of China (English)

    李桐安; 张立云

    2015-01-01

    相接双星物理参数的研究不仅是恒星物理领域的热点课题,也是国际天体物理界非常重视的研究方向,并且我们的课题组在国内已经成功地开展这个领域的研究工作.本文根据从ASAS巡天数据中下载的相接双星数据,利用国际上求解食双星物理参数工具(不断更新的Wil-son-Devinney程序)对相接双星的物理参数进行计算,第一次得到ASAS巡天数据中13颗相接双星的物理参数,利用这些物理参数,求解这些相接双星理论值与观测值的光变曲线以及结构图.最后根据获得的这些相接双星物理参数、理论与实测的光变曲线以及结构图,进行分析并得出对应的结论.%The study of the physical parameters of the earth is not only a hot issue in the field of stellar physics, but also the research direction of the international astrophysics,and our research group has successfully carried out the research in this field in China. According to the download contact binary data from ASAS survey data, the adjoining binary physical parameters calculation was carried out by using the solving food binary physical pa-rameters of the most famous( constantly updated Wilson-devinney program)tools,for the first time 13 star con-nected physical parameter of the binary in ASAS survey data were obtained,using these parameters,these bina-ries theory value and observations of light curves and structure diagram were successfully solved. According to the physical parameters,the theoretical and the measured curves of the binary star,and the structure of the sys-tem,the conclusion was drawn and analyzed.

  5. Evaluation of the electrical contact area in contact-mode scanning probe microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Celano, Umberto, E-mail: celano@imec.be, E-mail: u.celano@gmail.com; Chintala, Ravi Chandra; Vandervorst, Wilfried [IMEC, Kapeldreef 75, B-3001 Heverlee (Leuven) (Belgium); Department of Physics and Astronomy (IKS), KU Leuven, Celestijnenlaan 200D, 3001 Leuven (Belgium); Hantschel, Thomas; Giammaria, Guido; Conard, Thierry; Bender, Hugo [IMEC, Kapeldreef 75, B-3001 Heverlee (Leuven) (Belgium)

    2015-06-07

    The tunneling current through an atomic force microscopy (AFM) tip is used to evaluate the effective electrical contact area, which exists between tip and sample in contact-AFM electrical measurements. A simple procedure for the evaluation of the effective electrical contact area is described using conductive atomic force microscopy (C-AFM) in combination with a thin dielectric. We characterize the electrical contact area for coated metal and doped-diamond tips operated at low force (<200 nN) in contact mode. In both cases, we observe that only a small fraction (<10 nm{sup 2}) of the physical contact (∼100 nm{sup 2}) is effectively contributing to the transport phenomena. Assuming this reduced area is confined to the central area of the physical contact, these results explain the sub-10 nm electrical resolution observed in C-AFM measurements.

  6. Contact Dermatitis in Pediatrics.

    Science.gov (United States)

    Pelletier, Janice L; Perez, Caroline; Jacob, Sharon E

    2016-08-01

    Contact dermatitis is an umbrella term that describes the skin's reaction to contacted noxious or allergenic substances. The two main categories of contact dermatitis are irritant type and allergic type. This review discusses the signs, symptoms, causes, and complications of contact dermatitis. It addresses the testing, treatment, and prevention of contact dermatitis. Proper management of contact dermatitis includes avoidance measures for susceptible children. Implementation of a nickel directive (regulating the use of nickel in jewelry and other products that come into contact with the skin) could further reduce exposure to the most common allergens in the pediatric population. [Pediatr Ann. 2016;45(8):e287-e292.].

  7. Enhanced End-Contacts by Helium Ion Bombardment to Improve Graphene-Metal Contacts

    Directory of Open Access Journals (Sweden)

    Kunpeng Jia

    2016-08-01

    Full Text Available Low contact resistance between graphene and metals is of paramount importance to fabricate high performance graphene-based devices. In this paper, the impact of both defects induced by helium ion (He+ bombardment and annealing on the contact resistance between graphene and various metals (Ag, Pd, and Pt were systematically explored. It is found that the contact resistances between all metals and graphene are remarkably reduced after annealing, indicating that not only chemically adsorbed metal (Pd but also physically adsorbed metals (Ag and Pt readily form end-contacts at intrinsic defect locations in graphene. In order to further improve the contact properties between Ag, Pd, and Pt metals and graphene, a novel method in which self-aligned He+ bombardment to induce exotic defects in graphene and subsequent thermal annealing to form end-contacts was proposed. By using this method, the contact resistance is reduced significantly by 15.1% and 40.1% for Ag/graphene and Pd/graphene contacts with He+ bombardment compared to their counterparts without He+ bombardment. For the Pt/graphene contact, the contact resistance is, however, not reduced as anticipated with He+ bombardment and this might be ascribed to either inappropriate He+ bombardment dose, or inapplicable method of He+ bombardment in reducing contact resistance for Pt/graphene contact. The joint efforts of as-formed end-contacts and excess created defects in graphene are discussed as the cause responsible for the reduction of contact resistance.

  8. Towards an optimal contact metal for CNTFETs

    Science.gov (United States)

    Fediai, Artem; Ryndyk, Dmitry A.; Seifert, Gotthard; Mothes, Sven; Claus, Martin; Schröter, Michael; Cuniberti, Gianaurelio

    2016-05-01

    Downscaling of the contact length Lc of a side-contacted carbon nanotube field-effect transistor (CNTFET) is challenging because of the rapidly increasing contact resistance as Lc falls below 20-50 nm. If in agreement with existing experimental results, theoretical work might answer the question, which metals yield the lowest CNT-metal contact resistance and what physical mechanisms govern the geometry dependence of the contact resistance. However, at the scale of 10 nm, parameter-free models of electron transport become computationally prohibitively expensive. In our work we used a dedicated combination of the Green function formalism and density functional theory to perform an overall ab initio simulation of extended CNT-metal contacts of an arbitrary length (including infinite), a previously not achievable level of simulations. We provide a systematic and comprehensive discussion of metal-CNT contact properties as a function of the metal type and the contact length. We have found and been able to explain very uncommon relations between chemical, physical and electrical properties observed in CNT-metal contacts. The calculated electrical characteristics are in reasonable quantitative agreement and exhibit similar trends as the latest experimental data in terms of: (i) contact resistance for Lc = ∞, (ii) scaling of contact resistance Rc(Lc); (iii) metal-defined polarity of a CNTFET. Our results can guide technology development and contact material selection for downscaling the length of side-contacts below 10 nm.Downscaling of the contact length Lc of a side-contacted carbon nanotube field-effect transistor (CNTFET) is challenging because of the rapidly increasing contact resistance as Lc falls below 20-50 nm. If in agreement with existing experimental results, theoretical work might answer the question, which metals yield the lowest CNT-metal contact resistance and what physical mechanisms govern the geometry dependence of the contact resistance. However, at

  9. Epidemic contact tracing via communication traces.

    Directory of Open Access Journals (Sweden)

    Katayoun Farrahi

    Full Text Available Traditional contact tracing relies on knowledge of the interpersonal network of physical interactions, where contagious outbreaks propagate. However, due to privacy constraints and noisy data assimilation, this network is generally difficult to reconstruct accurately. Communication traces obtained by mobile phones are known to be good proxies for the physical interaction network, and they may provide a valuable tool for contact tracing. Motivated by this assumption, we propose a model for contact tracing, where an infection is spreading in the physical interpersonal network, which can never be fully recovered; and contact tracing is occurring in a communication network which acts as a proxy for the first. We apply this dual model to a dataset covering 72 students over a 9 month period, for which both the physical interactions as well as the mobile communication traces are known. Our results suggest that a wide range of contact tracing strategies may significantly reduce the final size of the epidemic, by mainly affecting its peak of incidence. However, we find that for low overlap between the face-to-face and communication interaction network, contact tracing is only efficient at the beginning of the outbreak, due to rapidly increasing costs as the epidemic evolves. Overall, contact tracing via mobile phone communication traces may be a viable option to arrest contagious outbreaks.

  10. Enterovirus D68

    Science.gov (United States)

    ... or mouth Someone has close contact such as kissing, hugging, or shaking hands with someone who has ... sick. Avoid close contact such as shaking hands, kissing, and hugging people who are sick. Cover coughs ...

  11. Contact Dermatitis for the Practicing Allergist.

    Science.gov (United States)

    Bernstein, David I

    2015-01-01

    This article provides an overview of important practice recommendations from the recently updated Contact Dermatitis Practice Parameter. This updated parameter provides essential recommendations pertaining to clinical history, physical examination, and patch testing evaluation of patients suspected of allergic contact dermatitis. In addition to providing guidance for performing and interpreting closed patch testing, the updated parameter provides concrete recommendations for assessing metal hypersensitivity in patients receiving prosthetic devices, for evaluating workers with occupational contact dermatitis, and also for addressing allergic contact dermatitis in children. Finally, the document provides practical recommendations useful for educating patients regarding avoidance of exposure to known contact sensitizers in the home and at work. The Contact Dermatitis Parameter is designed as a practical, evidence-based clinical tool to be used by allergists and dermatologists who routinely are called upon to evaluate patients with skin disorders.

  12. Contact Angle Goniometer

    Data.gov (United States)

    Federal Laboratory Consortium — Description:The FTA32 goniometer provides video-based contact angle and surface tension measurement. Contact angles are measured by fitting a mathematical expression...

  13. Corporate Consumer Contact API

    Data.gov (United States)

    General Services Administration — The data in the Corporate Consumer Contact API is based on the content you can find in the Corporate Consumer Contact listing in the Consumer Action Handbook (PDF)....

  14. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... lenses without a prescription in the United States. All contact lenses are medical devices that require a ... no such thing as a "one size fits all" contact lens. Lenses that are not properly fitted ...

  15. Dermatitis, contact (image)

    Science.gov (United States)

    This picture shows a skin inflammation (dermatitis) caused by contact with a material that causes an allergic reaction in this person. Contact dermatitis is a relatively common condition, and can be caused ...

  16. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... sell contacts without a prescription are breaking the law, and may be fined $11,000 per violation. " ... wear any kind of contact lens. In Butler's case, the lenses caused an infection and left her ...

  17. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Contact Lenses Without a Prescription Sep. 26, 2013 It started as an impulsive buy from a souvenir ... Can Ruin Vision Eye Makeup Safety In fact, it is illegal to sell colored contact lenses without ...

  18. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... not require the same level of care or consideration as a standard contact lens because they can ... sell contacts without a prescription are breaking the law, and may be fined $11,000 per violation. " ...

  19. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... like a suction cup." Halloween is a popular time for people to use colored contact lenses to ... wear costume contact lenses for Halloween or any time of year, follow these guidelines: Get an eye ...

  20. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... glow-in-the-dark lizard lenses, costume contacts can certainly add a spooky, eye-popping touch. But ... consideration as a standard contact lens because they can be purchased over-the-counter or on the ...

  1. Contact Us about Asbestos

    Science.gov (United States)

    How to contact EPA for more information on asbestos, including state and regional contacts, EPA’s Asbestos Abatement/Management Ombudsman and the Toxic Substances Control Act (TSCA) Assistance Information Service (TSCA Hotline).

  2. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... popping touch. But colored contact lenses are popular year-round, not just at Halloween. But few know ... contact lenses for Halloween or any time of year, follow these guidelines: Get an eye exam from ...

  3. Contact lens in keratoconus

    OpenAIRE

    Varsha M Rathi; Preeji S Mandathara; Srikanth Dumpati

    2013-01-01

    Contact lenses are required for the visual improvement in patients with keratoconus. Various contact lens options, such as rigid gas permeable (RGP) lenses, soft and soft toric lenses, piggy back contact lenses (PBCL), hybrid lenses and scleral lenses are availble. This article discusses about selection of a lens depending on the type of keratoconus and the fitting philosophies of various contact lenses including the starting trial lens. A Medline search was carried out for articles in the En...

  4. Seven types of nonsexual romantic physical affection among Brigham young university students.

    Science.gov (United States)

    Gulledge, Andrew K; Stahmann, Robert F; Wilson, Colwick M

    2004-10-01

    College students from Brigham Young University (N= 186; 68 men, 118 women, M age=22.7 yr., SD=3.5) completed a survey regarding nonsexual, romantic physical affection-defined as any touch intended to arouse feelings of love in the giver or the recipient. Respondents included both dating and married individuals, although this was not specified on the questionnaire. This descriptive study reports the mean, median, mode, and standard deviation for each of the seven physical affection types: backrubs/massages, caressing/stroking, cuddling/holding, holding hands, hugging, kissing on the face, and kissing on the lips. Grouped frequency distributions further describe the amounts of each type of physical affection. Although physical affection has been underrepresented in the literature, studies have shown it to be associated with relationship satisfaction, partner satisfaction, psychological intimacy, feeling understood, the development of attachment bonds, modulating cardiovascular arousal, and easier conflict resolution.

  5. Coral contact dermatitis

    OpenAIRE

    Jefferson, Julie; Thompson, Curtis; Hinshaw, Molly; Rich, Phoebe

    2015-01-01

    Corals can elicit both toxic and allergic reactions upon contact with the skin. Clinical presentations vary depending on whether the reaction is acute, delayed, or chronic. Literature concerning cutaneous reactions to corals and other Cnidarians is scarce. Herein we report a case of delayed contact hypersensitivity reaction to coral and review the clinical and histopathological features of coral contact dermatitis.

  6. Coral contact dermatitis.

    Science.gov (United States)

    Jefferson, Julie; Thompson, Curtis; Hinshaw, Molly; Rich, Phoebe

    2015-04-16

    Corals can elicit both toxic and allergic reactions upon contact with the skin. Clinical presentations vary depending on whether the reaction is acute, delayed, or chronic. Literature concerning cutaneous reactions to corals and other Cnidarians is scarce. Herein we report a case of delayed contact hypersensitivity reaction to coral and review the clinical and histopathological features of coral contact dermatitis.

  7. Contact urticaria : Present scenario

    Directory of Open Access Journals (Sweden)

    Bhatia Ruchi

    2009-01-01

    Full Text Available Immunological contact urticaria is a hypersensitivity reaction that appears on the skin following contact with an eliciting substance. Recent advances in our understanding of the molecular mechanism and pathogenesis of this reaction have altered its classification, diagnosis, and treatment. We discuss classification, epidemiology, diagnosis, testing, and treatment options that are available to patients with contact urticaria.

  8. Types of Contact Lenses

    Science.gov (United States)

    ... back to top ] Rigid Gas Permeable (RGP) Contact Lenses Rigid gas permeable contact lenses (RGPs) are more durable ... Ortho-K) Orthokeratology, or Ortho-K, is a lens fitting procedure that uses specially designed rigid gas permeable (RGP) contact lenses to change the ...

  9. Mixed lubricated line contacts

    OpenAIRE

    Faraon, Irinel Cosmin

    2005-01-01

    The present work deals with friction in mixed lubricated line contacts. Components in systems are becoming smaller and due to, for instance power transmitted, partial contact may occur. In industrial applications, friction between the moving contacting surfaces cannot be avoided, therefore it is essential that an engineer is able to predict friction.

  10. New Cosmetic Contact Allergens

    Directory of Open Access Journals (Sweden)

    An Goossens

    2015-02-01

    Full Text Available Allergic and photo-allergic contact dermatitis, and immunologic contact urticaria are potential immune-mediated adverse effects from cosmetics. Fragrance components and preservatives are certainly the most frequently observed allergens; however, all ingredients must be considered when investigating for contact allergy.

  11. The Induction of Mental and Contact Contamination

    Science.gov (United States)

    Lee, Michelle; Shafran, Roz; Burgess, Charlotte; Carpenter, Jodi; Millard, Emma; Thorpe, Susan

    2013-01-01

    Background: Extreme fear of contamination within obsessive compulsive disorder (OCD) is traditionally conceptualised as a physical phenomenon. More recent research has supported the notion of "mental" contamination (MC) in which people feel contaminated in the absence of physical contact. The current research sought to determine whether feelings…

  12. The Induction of Mental and Contact Contamination

    Science.gov (United States)

    Lee, Michelle; Shafran, Roz; Burgess, Charlotte; Carpenter, Jodi; Millard, Emma; Thorpe, Susan

    2013-01-01

    Background: Extreme fear of contamination within obsessive compulsive disorder (OCD) is traditionally conceptualised as a physical phenomenon. More recent research has supported the notion of "mental" contamination (MC) in which people feel contaminated in the absence of physical contact. The current research sought to determine whether…

  13. Contact lens in keratoconus

    Directory of Open Access Journals (Sweden)

    Varsha M Rathi

    2013-01-01

    Full Text Available Contact lenses are required for the visual improvement in patients with keratoconus. Various contact lens options, such as rigid gas permeable (RGP lenses, soft and soft toric lenses, piggy back contact lenses (PBCL, hybrid lenses and scleral lenses are availble. This article discusses about selection of a lens depending on the type of keratoconus and the fitting philosophies of various contact lenses including the starting trial lens. A Medline search was carried out for articles in the English language with the keywords keratoconus and various contact lenses such as Rose k lens, RGP lens, hybrid lens, scleral lens and PBCL.

  14. Modeling Thermal Contact Resistance

    Science.gov (United States)

    Kittel, Peter; Sperans, Joel (Technical Monitor)

    1994-01-01

    One difficulty in using cryocoolers is making good thermal contact between the cooler and the instrument being cooled. The connection is often made through a bolted joint. The temperature drop associated with this joint has been the subject of many experimental and theoretical studies. The low temperature behavior of dry joints have shown some anomalous dependence on the surface condition of the mating parts. There is also some doubts on how well one can extrapolate from the test samples to predicting the performance of a real system. Both finite element and analytic models of a simple contact system have been developed. The model assumes (a) the contact is dry (contact limited to a small portion of the total available area and the spaces in-between the actual contact patches are perfect insulators), (b) contacts are clean (conductivity of the actual contact is the same as the bulk), (c) small temperature gradients (the bulk conductance may be assumed to be temperature independent), (d) the absolute temperature is low (thermal radiation effects are ignored), and (e) the dimensions of the nominal contact area are small compared to the thickness of the bulk material (the contact effects are localized near the contact). The models show that in the limit of actual contact area much less than the nominal area (a much less than A), that the excess temperature drop due to a single point of contact scales as a(exp -1/2). This disturbance only extends a distance approx. A(exp 1/2) into the bulk material. A group of identical contacts will result in an excess temperature drop that scales as n(exp -1/2), where n is the number of contacts and n dot a is constant. This implies that flat rough surfaces will have a lower excess temperature drop than flat polished surfaces.

  15. Interfacial closure of contacting surfaces

    Science.gov (United States)

    Rieutord, F.; Rauer, C.; Moriceau, H.

    2014-08-01

    Understanding the contact between solid surfaces is a long-standing problem which has a strong impact on the physics of many processes such as adhesion, friction, lubrication and wear. Experimentally, the investigation of solid/solid interfaces remains challenging today, due to the lack of experimental techniques able to provide sub-nanometer scale information on interfaces buried between millimeters of materials. Yet, a strong interest exists improving the modeling of contact mechanics of materials in order to adjust their interface properties (e.g., thermal transport, friction). We show here that the essential features of the residual gap between contacting surfaces can be measured using high energy X-ray synchrotron reflectivity. The presence of this nano-gap is general to the contact of solids. In some special case however, it can be removed when attractive forces take over repulsive contributions, depending on both height and wavelength of asperity distributions (roughness). A criterion for this instability is established in the standard case of van der Waals attractive forces and elastic asperity compression repulsive forces (Hertz model). This collapse instability is confirmed experimentally in the case of silicon direct bonding, using high-energy X-ray synchrotron reflectivity and adhesion energy measurements. The possibility to achieve fully closed interfaces at room temperature opens interesting perspectives to build stronger assemblies with smaller thermal budgets.

  16. Elastohydrodynamics of contact in adherent sheets

    CERN Document Server

    Carlson, Andreas; Mahadevan, L

    2015-01-01

    Adhesive contact between a thin elastic sheet and a substrate in a liquid environment arises in a range of biological, physical and technological applications. By considering the dynamics of this process that naturally couples fluid flow, long wavelength elastic deformations and microscopic adhesion, and solving the resulting partial differential equation numerically, we uncover the short-time dynamics of the onset of adhesion and the long-time dynamics of a steady propagating adhesion front. Simple scaling laws corroborate our results for characteristic waiting-time for adhesive contact, as well as the speed of the adhesion front. A similarity analysis of the governing partial differential equation further allows us to determine the shape of a fluid filled bump ahead of the adhesion zone. Finally, our analysis yields the boundary conditions for the apparent elastohydrodynamic contact line, generalizing the well known conditions for static elastic contact while highlighting how microscale physics regularizes ...

  17. Contact angle hysteresis explained.

    Science.gov (United States)

    Gao, Lichao; McCarthy, Thomas J

    2006-07-04

    A view of contact angle hysteresis from the perspectives of the three-phase contact line and of the kinetics of contact line motion is given. Arguments are made that advancing and receding are discrete events that have different activation energies. That hysteresis can be quantified as an activation energy by the changes in interfacial area is argued. That this is an appropriate way of viewing hysteresis is demonstrated with examples.

  18. Introduction to contact mechanics

    CERN Document Server

    Fischer-Cripps, Anthony C

    2000-01-01

    Contact mechanics deals with the elastic or plastic contact between two solid objects, and is thus intimately connected with such topics as fracture, hardness, and elasticity.This text, intended for advanced undergraduates, begins with an introduction to the mechanical properties of materials, general fracture mechanics, and fractures in brittle solids.This is followed by a detailed discussion of stresses and the nature of elastic and elastic-plastic contact.

  19. Contact angle hysteresis: a review of fundamentals and applications

    NARCIS (Netherlands)

    Eral, H.B.; Mannetje, 't D.J.C.M.; Oh, J.M.

    2013-01-01

    Contact angle hysteresis is an important physical phenomenon. It is omnipresent in nature and also plays a crucial role in various industrial processes. Despite its relevance, there is a lack of consensus on how to incorporate a description of contact angle hysteresis into physical models. To clarif

  20. Contact Quality in Participation

    DEFF Research Database (Denmark)

    Simonsen, Jesper; Jensen, Olav Storm

    2016-01-01

    We investigate the concept of participation from the perspective of quality of the contact in the communicative interactions between participants. We argue for the need for an academic-personal competence that qualifies the human contact central in all Participatory Design (PD) activities as a way...... to contribute to “an era of participation.” We describe a contact perspective in PD developed through a collaboration with body-oriented psychotherapeutic research that have specialized experiences in investigating open-minded contact and authentic meetings as body-related experiences....

  1. Sutures and contact homology I

    CERN Document Server

    Colin, Vincent; Honda, Ko; Hutchings, Michael

    2010-01-01

    We define a relative version of contact homology for contact manifolds with convex boundary, and prove basic properties of this relative contact homology. Similar considerations also hold for embedded contact homology.

  2. Physical physics

    CERN Multimedia

    Schulman, Mark

    2006-01-01

    "Protons, electrons, positrons, quarks, gluons, muons, shmuons! I should have paid better attention to my high scholl physics teacher. If I had, maybe I could have understood even a fration of what Israeli particle physicist Giora Mikenberg was talking about when explaining his work on the world's largest science experiment." (2 pages)

  3. Screw bondgraph contact dynamics

    NARCIS (Netherlands)

    Visser, Martijn; Stramigioli, Stefano; Heemskerk, Cock

    2002-01-01

    This paper presents an elegant contact dynamics model in screw bondgraph form. It can model the contact between any two objects of finite curvature. It does so by defining a Gauss frame on the surfaces of both objects in the points that are closest to each other. Then it describes how the Gauss fram

  4. Contact dermatitis. A review

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Benezra, C; Burrows, D;

    1987-01-01

    In recent years, there has been a dramatic rise in our understanding of contact dermatitis. This paper is a review of our knowledge of the mechanisms involved in contact dermatitis and related phenomena, the investigation of these events and the emergence of significant new allergens during...

  5. Allergic Contact Dermatitis

    OpenAIRE

    Meltem Önder

    2009-01-01

    Allergic contact dermatitis is the delayed type hypersensitivity reaction to exogenous agents. Allergic contact dermatitis may clinically present acutely after allergen exposure and initial sensitization in a previously sensitized individual. Acute phase is characterized by erythematous, scaly plaques. In severe cases vesiculation and bullae in exposed areas are very characteristic. Repeated or continuous exposure of sensitized individual with allergen result in chronic dermatitis. Lichenific...

  6. Critical Points of Contact

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Morelli, Nicola

    2011-01-01

    where the networks meet and establish contact. Thus we argue for the usefulness of the notion of Critical Point of Contact (CPC) to deepen our understanding of the actual life within networks. En route to this notion we draw upon theories within as diverse realms such as interaction design, service...

  7. Contact Hamiltonian mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Bravetti, Alessandro, E-mail: alessandro.bravetti@iimas.unam.mx [Instituto de Investigaciones en Matemáticas Aplicadas y en Sistemas, Universidad Nacional Autónoma de México, A. P. 70543, México, DF 04510 (Mexico); Cruz, Hans, E-mail: hans@ciencias.unam.mx [Instituto de Ciencias Nucleares, Universidad Nacional Autónoma de México, A. P. 70543, México, DF 04510 (Mexico); Tapias, Diego, E-mail: diego.tapias@nucleares.unam.mx [Facultad de Ciencias, Universidad Nacional Autónoma de México, A.P. 70543, México, DF 04510 (Mexico)

    2017-01-15

    In this work we introduce contact Hamiltonian mechanics, an extension of symplectic Hamiltonian mechanics, and show that it is a natural candidate for a geometric description of non-dissipative and dissipative systems. For this purpose we review in detail the major features of standard symplectic Hamiltonian dynamics and show that all of them can be generalized to the contact case.

  8. Contact materials for nanoelectronics

    KAUST Repository

    Alshareef, Husam N.

    2011-02-01

    In this article, we review current research activities in contact material development for electronic and nanoelectronic devices. A fundamental issue in contact materials research is to understand and control interfacial reactions and phenomena that modify the expected device performance. These reactions have become more challenging and more difficult to control as new materials have been introduced and as device sizes have entered the deep nanoscale. To provide an overview of this field of inquiry, this issue of MRS Bulletin includes articles on gate and contact materials for Si-based devices, junction contact materials for Si-based devices, and contact materials for alternate channel substrates (Ge and III-V), nanodevices. © 2011 Materials Research Society.

  9. Surrogate Modeling of Deformable Joint Contact using Artificial Neural Networks

    Science.gov (United States)

    Eskinazi, Ilan; Fregly, Benjamin J.

    2016-01-01

    Deformable joint contact models can be used to estimate loading conditions for cartilage-cartilage, implant-implant, human-orthotic, and foot-ground interactions. However, contact evaluations are often so expensive computationally that they can be prohibitive for simulations or optimizations requiring thousands or even millions of contact evaluations. To overcome this limitation, we developed a novel surrogate contact modeling method based on artificial neural networks (ANNs). The method uses special sampling techniques to gather input-output data points from an original (slow) contact model in multiple domains of input space, where each domain represents a different physical situation likely to be encountered. For each contact force and torque output by the original contact model, a multi-layer feed-forward ANN is defined, trained, and incorporated into a surrogate contact model. As an evaluation problem, we created an ANN-based surrogate contact model of an artificial tibiofemoral joint using over 75,000 evaluations of a fine-grid elastic foundation (EF) contact model. The surrogate contact model computed contact forces and torques about 1000 times faster than a less accurate coarse grid EF contact model. Furthermore, the surrogate contact model was seven times more accurate than the coarse grid EF contact model within the input domain of a walking motion. For larger input domains, the surrogate contact model showed the expected trend of increasing error with increasing domain size. In addition, the surrogate contact model was able to identify out-of-contact situations with high accuracy. Computational contact models created using our proposed ANN approach may remove an important computational bottleneck from musculoskeletal simulations or optimizations incorporating deformable joint contact models. PMID:26220591

  10. Allergic contact dermatitis.

    Science.gov (United States)

    Becker, Detlef

    2013-07-01

    Allergic contact dermatitis is a frequent inflammatory skin disease. The suspected diagnosis is based on clinical symptoms, a plausible contact to allergens and a suitable history of dermatitis. Differential diagnoses should be considered only after careful exclusion of any causal contact sensitization. Hence, careful diagnosis by patch testing is of great importance. Modifications of the standardized test procedure are the strip patch test and the repeated open application test. The interpretation of the SLS (sodium lauryl sulfate) patch test as well as testing with the patients' own products and working materials are potential sources of error. Accurate patch test reading is affected in particular by the experience and individual factors of the examiner. Therefore, a high degree of standardization and continuous quality control is necessary and may be supported by use of an online patch test reading course made available by the German Contact Dermatitis Research Group. A critical relevance assessment of allergic patch test reactions helps to avoid relapses and the consideration of differential diagnoses. Any allergic test reaction should be documented in an allergy ID card including the INCI name, if appropriate. The diagnostics of allergic contact dermatitis is endangered by a seriously reduced financing of patch testing by the German statutory health insurances. Restrictive regulations by the German Drug Law block the approval of new contact allergens for routine patch testing. Beside the consistent avoidance of allergen contact, temporary use of systemic and topical corticosteroids is the therapy of first choice.

  11. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... about the members of the eye-care team . Consumer warning about the improper use of colored contact ... About the Academy Jobs at the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms of ...

  12. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Patient Stories Español Eye Health / News Halloween Hazard: The Hidden Dangers of Buying Decorative Contact Lenses Without ... been properly fitted by an eye care professional, the lenses stuck to my eye like a suction ...

  13. Tomato contact dermatitis

    DEFF Research Database (Denmark)

    Paulsen, Evy; Christensen, Lars P; Andersen, Klaus Ejner

    2012-01-01

    The tomato plant (Solanum lycopersicum) is an important crop worldwide. Whereas immediate-type reactions to tomato fruits are well known, contact dermatitis caused by tomatoes or tomato plants is rarely reported. The aims of this study were to present new data on contact sensitization to tomato...... plants and review the literature on contact dermatitis caused by both plants and fruits. An ether extract of tomato plants made as the original oleoresin plant extracts, was used in aimed patch testing, and between 2005 and 2011. 8 of 93 patients (9%) tested positive to the oleoresin extracts....... This prevalence is in accordance with the older literature that reports tomato plants as occasional sensitizers. The same applies to tomato fruits, which, in addition, may cause protein contact dermatitis. The allergens of the plant are unknown, but both heat-stable and heat-labile constituents seem...

  14. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... wear any kind of contact lens. In Butler's case, the lenses caused an infection and left her with a corneal abrasion. ... Studies Look at Effects of Marijuana on Vision FEB ...

  15. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... lentes de contacto de color Sep. 26, 2013 It started as an impulsive buy from a souvenir ... Can Ruin Vision Eye Makeup Safety In fact, it is illegal to sell colored contact lenses without ...

  16. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... not require the same level of care or consideration as a standard contact lens because they can ... Us About the Academy Jobs at the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms ...

  17. Contact Lens Risks

    Science.gov (United States)

    ... Tap and distilled water have been associated with Acanthamoeba keratitis, a corneal infection that is resistant to ... to: Advice for Patients With Soft Contact Lenses: Acanthamoeba Keratitis Infections Related to Complete® MoisturePlus Multi Purpose ...

  18. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses you are ... from dry eye now have a completely new, drug-free alternative to lubricating eye drops and topical ...

  19. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... shop, but 10 hours after she first put in a pair of colored contact lenses, Laura Butler of Parkersburg, W.Va., had "extreme pain in both eyes," she said. "Because I had not ...

  20. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... be purchased over-the-counter or on the Internet," says Thomas Steinemann, MD, professor of ophthalmology at ... ask for a prescription. There is no such thing as a "one size fits all" contact lens. ...

  1. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... also available in Spanish . Follow The Academy Professionals: Education Guidelines News Multimedia Public & Patients: Contact Us About the Academy Jobs at the Academy Financial Relationships with Industry Medical ...

  2. Fragrance allergic contact dermatitis.

    Science.gov (United States)

    Cheng, Judy; Zug, Kathryn A

    2014-01-01

    Fragrances are a common cause of allergic contact dermatitis in Europe and in North America. They can affect individuals at any age and elicit a spectrum of reactions from contact urticaria to systemic contact dermatitis. Growing recognition of the widespread use of fragrances in modern society has fueled attempts to prevent sensitization through improved allergen identification, labeling, and consumer education. This review provides an overview and update on fragrance allergy. Part 1 discusses the epidemiology and evaluation of suspected fragrance allergy. Part 2 reviews screening methods, emerging fragrance allergens, and management of patients with fragrance contact allergy. This review concludes by examining recent legislation on fragrances and suggesting potential additions to screening series to help prevent and detect fragrance allergy.

  3. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Follow The Academy Professionals: Education Guidelines News Multimedia Public & Patients: Contact Us About the Academy Jobs at the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms of Service For Advertisers For Media Ophthalmology ...

  4. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... not require the same level of care or consideration as a standard contact lens because they can ... 2016 More Eye Health News Studies Look at Effects of Marijuana on Vision FEB 28, 2017 By ...

  5. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Contact Lens-Related Eye Infections Mar 01, 2017 New Technology Helps the Legally Blind Be More Independent ... Worse? May 16, 2016 More Eye Health News New Dry Eye Treatment is a Tear-Jerker JUL ...

  6. Colored Contact Lens Dangers

    Science.gov (United States)

    ... Prevention News Ask an Ophthalmologist Patient Stories Español Eye Health / News Halloween Hazard: The Hidden Dangers of Buying Decorative Contact Lenses Without a Prescription Sep. 26, 2013 It started ...

  7. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Hidden Dangers of Buying Decorative Contact Lenses Without a Prescription Leer en Español: Peligros asociados con los ... contacto de color Sep. 26, 2013 It started as an impulsive buy from a souvenir shop, but ...

  8. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Healthy Contact Lens Use May 31, 2016 Is El Niño Making Your Allergies Worse? May 16, 2016 ... Number: * Email: * Enter code: * Message: Thank you Your feedback has been sent.

  9. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Patient Stories Español Eye Health / News Halloween Hazard: The Hidden Dangers of Buying Decorative Contact Lenses Without ... been properly fitted by an eye care professional, the lenses stuck to my eye like a suction ...

  10. Pediatric contact dermatitis

    OpenAIRE

    Sharma Vinod; Asati Dinesh

    2010-01-01

    Allergic contact dermatitis (ACD) in children, until recently, was considered rare. ACD was considered as a disorder of the adult population and children were thought to be spared due to a lack of exposure to potential allergens and an immature immune system. Prevalence of ACD to even the most common allergens in children, like poison ivy and parthenium, is relatively rare as compared to adults. However, there is now growing evidence of contact sensitization of the pediatric population, and i...

  11. Contact air abrasion.

    Science.gov (United States)

    Porth, R

    1999-05-01

    The advantages of contact air abrasion techniques are readily apparent. The first, of course, is the greatly increased ease of use. Working with contact also tends to speed the learning curve by giving the process a more natural dental feel. In addition, as one becomes familiar with working with a dust stream, the potential for misdirecting the air flow is decreased. The future use of air abrasion for deep decay removal will make this the treatment of choice for the next millennium.

  12. EURANOS. The Handbook Users Group (HUG)

    DEFF Research Database (Denmark)

    Nisbet, A.F.; Andersson, Kasper Grann; Carlé, B.

    Three handbooks to assist in the management of contaminated food production systems, inhabited areas and drinking water supplies have been developed in conjunction with a wide range of stakeholders in Europe. These handbooks are living documents that will require updating from time to time...

  13. The Principal Kids Love To Hug.

    Science.gov (United States)

    Collins, Patrick

    2000-01-01

    David Nufer, Alaska's National Distinguished Principal for 1999, uses collaboration to create a family atmosphere at Finger Lake (Alaska) Elementary School. He turned the scheduling process over to teachers, involved teachers and parents in implementing a two-track system of mixed and single-age classrooms, brought in senior citizens to supplement…

  14. Nanofluid surface wettability through asymptotic contact angle.

    Science.gov (United States)

    Vafaei, Saeid; Wen, Dongsheng; Borca-Tasciuc, Theodorian

    2011-03-15

    This investigation introduces the asymptotic contact angle as a criterion to quantify the surface wettability of nanofluids and determines the variation of solid surface tensions with nanofluid concentration and nanoparticle size. The asymptotic contact angle, which is only a function of gas-liquid-solid physical properties, is independent of droplet size for ideal surfaces and can be obtained by equating the normal component of interfacial force on an axisymmetric droplet to that of a spherical droplet. The technique is illustrated for a series of bismuth telluride nanofluids where the variation of surface wettability is measured and evaluated by asymptotic contact angles as a function of nanoparticle size, concentration, and substrate material. It is found that the variation of nanofluid concentration, nanoparticle size, and substrate modifies both the gas-liquid and solid surface tensions, which consequently affects the force balance at the triple line, the contact angle, and surface wettability.

  15. Double pendulum contact problem

    Directory of Open Access Journals (Sweden)

    Špička J.

    2014-06-01

    Full Text Available The work concerns contact problems focused on biomechanical systems modelled by a multibody approach. The example is modelling of impact between a body and an infrastructure. The paper firstly presents algorithm for minimum distance calculation. An analytical approach using a tangential plain perpendicular to an initial one is applied. Contact force generated during impact is compared by three different continuous force models, namely the Hertz’s model, the spring-dashpot model and the non-linear damping model. In order to identify contact parameters of these particular models, the method of numerical optimization is used. Purpose of this method is to find the most corresponding results of numerical simulation to the original experiment. Numerical optimization principle is put upon a bouncing ball example for the purpose of evaluation of desirable contact force parameters. The contact modelling is applied to a double pendulum problem. The equation of motion of the double pendulum system is derived using Lagrange equation of the second kind with multipliers, respecting the contact phenomena. Applications in biomechanical research are hinted at arm gravity motion and a double pendulum impact example.

  16. Patients with multiple contact allergies

    DEFF Research Database (Denmark)

    Carlsen, Berit Christina; Andersen, Klaus Ejner; Menné, Torkil;

    2008-01-01

    Patients with multiple contact allergies, also referred to as polysensitized, are more frequent than predicted from prevalence of single sensitivities. The understanding of why some people develop multiple contact allergies, and characterization of patients with multiple contact allergies...... of developing multiple contact allergies. Evidence of allergen clusters among polysensitized individuals is also reviewed. The literature supports the idea that patients with multiple contact allergies constitute a special entity within the field of contact allergy. There is no generally accepted definition...... of patients with multiple contact allergies. We suggest that contact allergy to 3 or more allergens are defined as multiple contact allergies....

  17. Contact dermatitis in cement workers in Isfahan

    Directory of Open Access Journals (Sweden)

    Iraji Fariba

    2006-01-01

    Full Text Available BACKGROUND: Due to recent industrialization and inadequately protected workers or in other words poor supervision on constructive workers habits in our large city of Isfahan cement contact dermatitis is relatively high especially among cement factory workers and constructive personnel. PURPOSES: To investigate the prevalence rate of cement contact dermatitis in cement factory workers in Isfahan. METHODS: A case-control clinical study was carried out by randomly selecing 150 factory workders and 150 official clerks in a cement factory in Isfahan in 2001. After a complete physical examination, data was recorded in observational checklists. FINDINGS: The percentages of contact dermatitis prevalences in the first and the second groups were 22% and 5.3% respectively. About 60% of cement workers with contact dermatitis were between 30-40 years of age. There was a direct relationship with age in both groups of the workers. In the high-exposure group, the hand eczema along was 70% but in the other group the percentage of involvement was the same in exposed and unexposed anatomical areas. CONCLUSIONS: There was a direct relationship between occurrence and the severity of involvement and duration of contact in the first group. Cent percent of cement workers had contact dermatitis after 10 or less years, but the percentage among the other group was 35%. LIMITATION: Irritant contact dermatitis to cement has not been detected.

  18. Towards Accurate Modeling of Moving Contact Lines

    CERN Document Server

    Holmgren, Hanna

    2015-01-01

    A main challenge in numerical simulations of moving contact line problems is that the adherence, or no-slip boundary condition leads to a non-integrable stress singularity at the contact line. In this report we perform the first steps in developing the macroscopic part of an accurate multiscale model for a moving contact line problem in two space dimensions. We assume that a micro model has been used to determine a relation between the contact angle and the contact line velocity. An intermediate region is introduced where an analytical expression for the velocity exists. This expression is used to implement boundary conditions for the moving contact line at a macroscopic scale, along a fictitious boundary located a small distance away from the physical boundary. Model problems where the shape of the interface is constant thought the simulation are introduced. For these problems, experiments show that the errors in the resulting contact line velocities converge with the grid size $h$ at a rate of convergence $...

  19. Ohmic contacts to Gallium Nitride materials

    Energy Technology Data Exchange (ETDEWEB)

    Greco, Giuseppe [Consiglio Nazionale delle Ricerche—Istituto per la Microelettronica e Microsistemi (CNR-IMM), Strada VIII, n. 5 - Zona Industriale, 95121 Catania (Italy); Iucolano, Ferdinando [STMicroelectronics, Stradale Primosole 50, 95121 Catania (Italy); Roccaforte, Fabrizio, E-mail: fabrizio.roccaforte@imm.cnr.it [Consiglio Nazionale delle Ricerche—Istituto per la Microelettronica e Microsistemi (CNR-IMM), Strada VIII, n. 5 - Zona Industriale, 95121 Catania (Italy)

    2016-10-15

    Highlights: • Ohmic contacts are a crucial issue for wide band gap semiconductors devices. • This paper reviews the mechanisms of Ohmic contact formation on GaN-based materials. • Ti/Al-based contacts and multilayers (Ti/Al/X/Au) are used for n-type GaN. • Ni/Au-based bilayers are used for Ohmic contacts to p-type GaN. • Several parameters affect Ohmic contact formation to AlGaN/GaN heterostructures . • Au-free contacts are important for the integration of GaN technology on Si-fabs. - Abstract: In this review article, a comprehensive study of the mechanisms of Ohmic contact formation on GaN-based materials is presented. After a brief introduction on the physics of Ohmic contacts, a resume of the most important results obtained in literature is reported for each of the systems taken in consideration (n-type GaN, p-type GaN and AlGaN/GaN heterostructures). The optimal metallization schemes and processing conditions to obtain low resistance Ohmic contacts are presented, discussing the role of the single metals composing the stack and the modification induced by the thermal annealing, either on the metal layers or at the interface with GaN. Physical insights on the mechanism of Ohmic contact formation have been gained by correlating the temperature dependence of the electrical parameters with a morphological/structural analysis of the interface. In the case of the AlGaN/GaN systems, the influence of the heterostructure parameters on the Ohmic contacts has been taken into account adapting the classical thermionic field emission model to the presence of the two dimensional electron gas (2DEG). Finally, the state of the art of “Au-free” metallization to AlGaN/GaN heterostructures is also presented, being this latter a relevant topic for the integration of GaN technology on large scale Silicon devices fabs.

  20. Rough Surface Contact

    Directory of Open Access Journals (Sweden)

    T Nguyen

    2017-06-01

    Full Text Available This paper studies the contact of general rough curved surfaces having nearly identical geometries, assuming the contact at each differential area obeys the model proposed by Greenwood and Williamson. In order to account for the most general gross geometry, principles of differential geometry of surface are applied. This method while requires more rigorous mathematical manipulations, the fact that it preserves the original surface geometries thus makes the modeling procedure much more intuitive. For subsequent use, differential geometry of axis-symmetric surface is considered instead of general surface (although this “general case” can be done as well in Chapter 3.1. The final formulas for contact area, load, and frictional torque are derived in Chapter 3.2.

  1. Acrylate Systemic Contact Dermatitis.

    Science.gov (United States)

    Sauder, Maxwell B; Pratt, Melanie D

    2015-01-01

    Acrylates, the 2012 American Contact Dermatitis Society allergen of the year, are found in a range of products including the absorbent materials within feminine hygiene pads. When fully polymerized, acrylates are nonimmunogenic; however, if not completely cured, the monomers can be potent allergens.A 28-year-old woman is presented, who had her teeth varnished with Isodan (Septodont, Saint-Maur-des-Fossés, France) containing HEMA (2-hydroxyethyl methacrylate) with no initial reaction. Approximately 1 month later, the patient developed a genital dermatitis secondary to her feminine hygiene pads. The initial reaction resolved, but 5 months later, the patient developed a systemic contact dermatitis after receiving a second varnishing.The patient was dramatically patch test positive to many acrylates. This case demonstrates a reaction to likely unpolymerized acrylates within a feminine hygiene pad, as well as broad cross-reactivity or cosensitivity to acrylates, and possibly a systemic contact dermatitis with systemic re-exposure to unpolymerized acrylates.

  2. Shoe allergic contact dermatitis.

    Science.gov (United States)

    Matthys, Erin; Zahir, Amir; Ehrlich, Alison

    2014-01-01

    Foot dermatitis is a widespread condition, affecting men and women of all ages. Because of the location, this condition may present as a debilitating problem to those who have it. Allergic contact dermatitis involving the feet is frequently due to shoes or socks. The allergens that cause shoe dermatitis can be found in any constituent of footwear, including rubber, adhesives, leather, dyes, metals, and medicaments. The goal of treatment is to identify and minimize contact with the offending allergen(s). The lack of product information released from shoe manufacturers and the continually changing trends in footwear present a challenge in treating this condition. The aim of this study is to review the current literature on allergic contact shoe dermatitis; clinical presentation, allergens, patch testing, and management will be discussed. PubMed and MEDLINE databases were used for the search, with a focus on literature updates from the last 15 years.

  3. Allergic contact dermatitis.

    Science.gov (United States)

    Gober, Michael D; Gaspari, Anthony A

    2008-01-01

    Allergic contact dermatitis is a classic example of a cell mediated hypersensitivity reaction in the skin. This occurs as a result of xenobiotic chemicals penetrating into the skin, chemically reacting with self proteins, eventually resulting in a hapten-specific immune response. It is precisely because of this localized immune response that allergic signs and symptoms occur (redness, edema, warmth and pruritus). It has been known for years that conventional T-cells (CD4+ or CD8+ T-cells that express a T-cell receptor alpha/Beta) are critical effectors for this reaction. There is emerging evidence that innate immune lymphocytes such as invariant Natural killer T-cells and even Natural killer cells may play important role. Other T-cell types such as Tregulatory cells and the IL-10 secreting Tregulatory cells type I are likely to be important in the control (resolution) of allergic contact dermatitis. Other cell types that may contribute include B-cells and hapten-specific IgM. Additionally, epidermal Langerhans cells have been ascribed an indispensable role as an antigen presenting cell to educate T-cells of the skin immune system. Studies of mice that lack this cell type suggest that Langerhans cells may be dispensible, and may even play a regulatory role in allergic contact dermatitis. The identity of the antigen presenting cells that complement Langerhans cells has yet to be identified. Lastly, Keratinocytes play a role in all phases of allergic contact dermatitis, from the early initiation phase with the elaboration of inflammatory cytokines, that plays a role in Langerhans cell migration, and T-cell trafficking, through the height of the inflammatory phase with direct interactions with epidermotrophic T-cells, through the resolution phase of allergic contact dermatitis with the production of anti-inflammatory cytokines and tolerogenic antigen presentation to effector T-cells. As the understanding of allergic contact dermatitis continues to improve, this will

  4. Psoriasis and Contact Sensitivitiy

    Directory of Open Access Journals (Sweden)

    Deniz Arlı

    2013-03-01

    Full Text Available Objective: The aim of this study was to investigate the frequency of contact sensitivity in patients with psoriasis, whether there was an association between clinical types and contact sensitivity, whether patch test is a factor that causes Koebner reaction and frequency of contact sensitivity against commonly used topical corticosteroids. Methods: Fifty patients with psoriasis and 50 healthy volunteers were included in this study and ‘European standard series' and test units of active ingredients of some corticosteroids were performed on their upper back. The patches were read on hours 24, 48 and on day 7 in order to detect delayed allergic reactions and also Koebner reaction. The results of both groups were compared by using chi-square test. Results: At the end of the patch test allergic reaction was observed in 7 of 50 (14% patients with psoriasis and 12 of 50 (24% healthy volunteers. There was no statistically significant difference between allergic reaction of study group and healthy volunteers. There was no statistically significant difference between the clinical types of psoriasis and allergic contact sensitivity. The frequency of reaction increased in individuals having a positive sensitivity history to any substance in both patient and control groups. Reaction to topical steroids was not seen in any patients. Koebner phenomenon due to patch test was also not seen in any patients. Conclusion: We did not show any association between psoriasis and contact sensitivity in this study. We believe that contact allergens should be determined by using patch test in psoriatic patients with a positive history to any substance.

  5. Ohmic contacts to Gallium Nitride materials

    Science.gov (United States)

    Greco, Giuseppe; Iucolano, Ferdinando; Roccaforte, Fabrizio

    2016-10-01

    In this review article, a comprehensive study of the mechanisms of Ohmic contact formation on GaN-based materials is presented. After a brief introduction on the physics of Ohmic contacts, a resume of the most important results obtained in literature is reported for each of the systems taken in consideration (n-type GaN, p-type GaN and AlGaN/GaN heterostructures). The optimal metallization schemes and processing conditions to obtain low resistance Ohmic contacts are presented, discussing the role of the single metals composing the stack and the modification induced by the thermal annealing, either on the metal layers or at the interface with GaN. Physical insights on the mechanism of Ohmic contact formation have been gained by correlating the temperature dependence of the electrical parameters with a morphological/structural analysis of the interface. In the case of the AlGaN/GaN systems, the influence of the heterostructure parameters on the Ohmic contacts has been taken into account adapting the classical thermionic field emission model to the presence of the two dimensional electron gas (2DEG). Finally, the state of the art of "Au-free" metallization to AlGaN/GaN heterostructures is also presented, being this latter a relevant topic for the integration of GaN technology on large scale Silicon devices fabs.

  6. Critical Points of Contact

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Morelli, Nicola

    2011-01-01

    where the networks meet and establish contact. Thus we argue for the usefulness of the notion of Critical Point of Contact (CPC) to deepen our understanding of the actual life within networks. En route to this notion we draw upon theories within as diverse realms such as interaction design, service...... design, geography, and mobility studies. After the introduction in section we develop and define the notion of CPC based upon a broad set of disciplines and theories. We illustrate the usefulness of the notion within the field of mobility in the network city and within the field of service design...

  7. OCCUPATIONAL CONTACT DERMATITIS IN HAIRDRESSERS

    Directory of Open Access Journals (Sweden)

    Komang Ayu Kristiana Dewi K

    2013-07-01

    Full Text Available Occupational skin disease is a skin disease caused or aggravated by work. Occupational skin disease experienced by most hairdressers are contact dermatitis, both irritant and allergic. Some examples of materials that can cause contact dermatitis in hairdressers are nickel, formaldehyde, ammonium thioglycolate, and p-phenylenediaminz. Diagnosis of contact dermatitis in hairdressers enforced through anamnesa, physical examination, and additional tests that are relevant include patch test. The most important treatment is to avoid exposure to irritants and eliminate factors that aggravate. Where appropriate, to address the inflammation can be given topical corticosteroids, such as hydrocortisone. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  8. Forensic Analysis of a Contact Lens in a Murder Case.

    Science.gov (United States)

    Zwerling, Charles S

    2016-03-01

    Contact lenses have had rare relevance in trials and/or investigations. After 5 years of burial, orbital remnants were retrieved from an exhumed body and subsequently identified as a key piece of material evidence in a murder trial. The exhumed case materials were evaluated under laboratory conditions and were determined to be contact lens remnants. Contact lens fracture and burial simulation studies were performed to provide additional corroboration of the physical findings of the exhumed contact lens remnants. This material evidence was instrumental in providing factual proof refuting the defendant's testimony in the murder trial. A brief history of contact lens composition and use is provided for understanding the methods and observational results. This forensic case study represents the first published documentation of a contact lens from an exhumed body being used in a murder investigation and establishes an operational procedure for future forensic contact lens examinations. © 2016 American Academy of Forensic Sciences.

  9. Dynamic wetting and stress singularity on contact line

    Institute of Scientific and Technical Information of China (English)

    WANG; Xiaodong; (王晓东); PENG; Xiaofeng; (彭晓峰); LEE; Duzhong; (李笃中)

    2003-01-01

    A theoretical investigation is conducted to understand the contact line movement and associated contact angle phenomena. Contact line is supposed to move on a thin precursor film, and contact line has a velocity and is subject to viscous stress on the film or geometrically on the solid surface. With the introduction of a characteristic parameter, λ′, the movement of contact line and contact angle phenomena are very well described in both physics and mathematics. The viscous shearing stress exerted by liquid on solid surface was derived, and the behavior of dynamic contact angle was recognized on rough solid surfaces. The analyses indicate that characteristic parameter λ′ is dependent upon solid wall intrinsic property and mechanical performance, and is irrelevant to liquid property. Theoretical predictions are in good agreement with available experimental data in literature.

  10. Determinants of skin contact pressure formation during non-invasive ventilation.

    Science.gov (United States)

    Dellweg, Dominic; Hochrainer, Dieter; Klauke, Matthias; Kerl, Jens; Eiger, Glenn; Kohler, Dieter

    2010-03-01

    There is no published data about mask features that impact skin contact pressure during mask ventilation. To investigate the physical factors of skin contact pressure formation. We measured masks with original and reduced air cushion size and recorded contact pressure. We determined cushion contact and mask areas by planimetric measurements. Contact pressures necessary to prevent air leakage during inspiration exceed inspiratory pressure by 1.01+/-0.41 hPa independent of cushion size. Contact area, ventilator pressure and mask area during inspiration and expiration impact contact pressure. Mask contact pressures are higher during expiration. The contact pressure increases with increase in inspiratory pressures independent of the ventilator cycle. During expiration, the contact pressure will increase in proportion to the expiratory pressure reduction of the ventilator. The mask with reduced air cushion size developed higher contact pressures. Contact pressure can be reduced by selecting masks with a small mask area in combination with a large mask cushion.

  11. Colored Contact Lens Dangers

    Science.gov (United States)

    ... Follow The Academy Professionals: Education Guidelines News Multimedia Public & Patients: Contact Us About the Academy Jobs at the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms of Service For Advertisers For Media Ophthalmology Job Center © American Academy of ...

  12. Lubrication Of Nonconformal Contacts

    Science.gov (United States)

    Jeng, Yeau-Ren

    1991-01-01

    Report discusses advances in knowledge of lubrication of nonconformal contacts in bearings and other machine elements. Reviews previous developments in theory of lubrication, presents advances in theory of lubrication to determine minimum film thickness, and describes experiments designed to investigate one of regimes of lubrication for ball bearings.

  13. [Contact allergies in musicians].

    Science.gov (United States)

    Gasenzer, E R; Neugebauer, E A M

    2012-12-01

    During the last years, the problem of allergic diseases has increased. Allergies are errant immune responses to a normally harmless substance. In musicians the allergic contact dermatitis to exotic woods is a special problem. Exotic rosewood contains new flavonoids, which trigger an allergic reaction after permanent contact with the instrument. High quality woodwind instruments such as baroque flute or clarinets are made in ebony or palisander because of its great sound. Today instruments for non-professional players are also made in these exotic materials and non-professionals may have the risk to develop contact dermatitis, too. Brass-player has the risk of an allergic reaction to the different metals contained in the metal sheets of modern flutes and brass instruments. Specially nickel and brass alloys are used to product flute tubes or brass instruments. Special problem arises in children: patients who are allergic to plants or foods have a high risk to develop contact dermatitis. Parents don't know the materials of low-priced instruments for beginners. Often unknown cheap woods from exotic areas are used. Low-priced brass instruments contain high amount of brass and other cheap metals. Physicians should advice musician-patients or parents about the risks of the different materials and look for the reason of eczema on mouth, face, or hands.

  14. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Tips & Prevention News Ask an Ophthalmologist Patient Stories Español Eye Health / News Halloween Hazard: The Hidden Dangers ... Decorative Contact Lenses Without a Prescription Leer en Español: Peligros asociados con los lentes de contacto de ...

  15. Lettuce contact allergy

    DEFF Research Database (Denmark)

    Paulsen, Evy; Andersen, Klaus E

    2016-01-01

    Lettuce (Lactuca sativa L.) and its varieties are important vegetable crops worldwide. They are also well-known, rarely reported, causes of contact allergy. As lettuce allergens and extracts are not commercially available, the allergy may be underdiagnosed. The aims of this article are to present...

  16. [Current contact allergens].

    Science.gov (United States)

    Geier, J; Uter, W; Lessmann, H; Schnuch, A

    2011-10-01

    Ever-changing exposure to contact allergens, partly due to statutory directives (e.g. nickel, chromate, methyldibromo glutaronitrile) or recommendations from industrial associations (e.g. hydroxyisohexyl 3-cyclohexene carboxaldehyde), requires on-going epidemiologic surveillance of contact allergy. In this paper, the current state with special focus in fragrances and preservatives is described on the basis of data of the Information Network of Departments of Dermatology (IVDK) of the year 2010. In 2010, 12,574 patients were patch tested in the dermatology departments belonging to the IVDK. Nickel is still the most frequent contact allergen. However the continuously improved EU nickel directive already has some beneficial effect; sensitization frequency in young women is dropping. In Germany, chromate-reduced cement has been in use now for several years, leading to a decline in chromate sensitization in brick-layers. Two fragrance mixes are part of the German baseline series; they are still relevant. The most important fragrances in these mixes still are oak moss absolute and hydroxyisohexyl 3-cyclohexene carboxaldehyde. However, in relation to these leading allergens, sensitization frequency to other fragrances contained in the mixes seems to be increasing. Among the preservatives, MCI/MI has not lost its importance as contact allergen, in contrast to MDBGN. Sources of MCI/MI sensitization obviously are increasingly found in occupational context. Methylisothiazolinone is a significant allergen in occupational settings, and less frequently in body care products.

  17. The Nuclear Contact Exists

    CERN Document Server

    Hen, O; Piasetzky, E; Miller, G A; Sargsian, M M

    2014-01-01

    Many-body systems of strongly interacting Fermions are ubiquitous in nature, ranging from High-Tc superconductors and ultra-cold atomic gases to atomic nuclei and neutron stars. Theoretical predictions, recently verified by measurements on ultra-cold atomic gases, show that under certain conditions the universal behavior of systems composed of two kinds of fermions can be described using a single parameter, simply called the contact, which is a measure of the number of different-fermion pairs in close proximity. This paper discusses the relevance of the contact for very different systems: atomic nuclei, made of strongly-interacting neutrons and protons. Here we show that the high-momentum distributions of protons and neutrons in nuclei, dominated by correlated proton-neutron pairs mainly in a spin-triplet state, have the same momentum dependence as those of cold atoms, with a strength described by the contact. We use high-energy electron scattering data to extract a value for the nuclear contact consistent wi...

  18. Contact: Releasing the news

    Science.gov (United States)

    Pinotti, Roberto

    The problem of mass behavior after man's future contacts with other intelligences in the universe is not only a challenge for social scientists and political leaders all over the world, but also a cultural time bomb as well. In fact, since the impact of CETI (Contact with Extraterrestrial Intelligence) on human civilization, with its different cultures, might cause a serious socio-anthropological shock, a common and predetermined worldwide strategy is necessary in releasing the news after the contact, in order to keep possible manifestations of fear, panic and hysteria under control. An analysis of past studies in this field and of parallel historical situations as analogs suggests a definite "authority crisis" in the public as a direct consequence of an unexpected release of the news, involving a devastating "chain reaction" process (from both the psychological and sociological viewpoints) of anomie and maybe the collapse of today's society. The only way to prevent all this is to prepare the world's public opinion concerning contact before releasing the news, and to develop a long-term strategy through the combined efforts of scientists, political leaders, intelligence agencies and the mass media, in order to create the cultural conditions in which a confrontation with ETI won't affect mankind in a traumatic way. Definite roles and tasks in this multi-level model are suggested.

  19. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... to drive for eight weeks," she said. "I now live with a corneal scar, vision damage and a drooping eyelid." To safely wear costume contact lenses for Halloween or any time of year, follow these guidelines: Get an eye ...

  20. Thermal Contact Conductance

    Science.gov (United States)

    Salerno, Louis J.; Kittel, Peter

    1997-01-01

    The performance of cryogenic instruments is often a function of their operating temperature. Thus, designers of cryogenic instruments often are required to predict the operating temperature of each instrument they design. This requires accurate thermal models of cryogenic components which include the properties of the materials and assembly techniques used. When components are bolted or otherwise pressed together, a knowledge of the thermal performance of such joints are also needed. In some cases, the temperature drop across these joints represents a significant fraction of the total temperature difference between the instrument and its cooler. While extensive databases exist on the thermal properties of bulk materials, similar databases for pressed contacts do not. This has often lead to instrument designs that avoid pressed contacts or to the over-design of such joints at unnecessary expense. Although many people have made measurements of contact conductances at cryogenic temperatures, this data is often very narrow in scope and even more often it has not been published in an easily retrievable fashion, if published at all. This paper presents a summary of the limited pressed contact data available in the literature.

  1. Language Contact and Bilingualism

    NARCIS (Netherlands)

    Appel, René; Muysken, Pieter

    2006-01-01

    What happens - sociologically, linguistically, educationally, politically - when more than one language is in regular use in a community? How do speakers handle these languages simultaneously, and what influence does this language contact have on the languages involved? Although most people in the w

  2. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... person. Get follow up exams with your eye care provider. If you notice redness, swelling, excessive discharge, pain or discomfort from wearing contact lenses, remove the lenses and seek immediate medical attention from an ophthalmologist. Related resources: Learn how ...

  3. Contact allergy to cosmetics

    DEFF Research Database (Denmark)

    Held, E; Johansen, J D; Agner, T

    1999-01-01

    .4%) had doubtfully positive reaction(s) and 31 (5.8%) had irritant reaction(s). Skin-care products were tested most frequently and were also found to cause most positive, doubtfully positive and irritant reactions, 80% of the patients with positive reactions to their own products had no history of contact...

  4. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... EyeSmart videos on your website . Printable posters . Promotional materials for eye health observances. EyeSmart resources are also available in Spanish . Follow The Academy Professionals: Education Guidelines News Multimedia Public & Patients: Contact Us About the Academy Jobs ...

  5. Duality based contact shape optimization

    DEFF Research Database (Denmark)

    Vondrák, Vít; Dostal, Zdenek; Rasmussen, John

    2001-01-01

    An implementation of semi-analytic method for the sensitivity analysis in contact shape optimization without friction is described. This method is then applied to the contact shape optimization.......An implementation of semi-analytic method for the sensitivity analysis in contact shape optimization without friction is described. This method is then applied to the contact shape optimization....

  6. Electrical contacts principles and applications

    CERN Document Server

    Slade, Paul G

    2013-01-01

    Covering the theory, application, and testing of contact materials, Electrical Contacts: Principles and Applications, Second Edition introduces a thorough discussion on making electric contact and contact interface conduction; presents a general outline of, and measurement techniques for, important corrosion mechanisms; considers the results of contact wear when plug-in connections are made and broken; investigates the effect of thin noble metal plating on electronic connections; and relates crucial considerations for making high- and low-power contact joints. It examines contact use in switch

  7. Allergic contact dermatitis in children.

    Science.gov (United States)

    Fontana, E; Belloni Fortina, A

    2014-12-01

    Allergic contact dermatitis is an inflammatory skin disease (delayed type hypersensitivity reaction) that accounts for up to 20% of all childhood dermatitis. Allergic contact dermatitis represents a clinical manifestation of contact sensitization and usually occurs at skin sites that have come into contact with the allergen. The clinical features of allergic contact dermatitis are itchy eczematous lesions. Prevalence of contact sensitization varies between 27% and 96% of children with suspected contact dermatitis. The relationship between contact sensitization and atopic dermatitis has been widely discussed but only conflicting data have been reported. Epicutaneous patch testing is the gold standard for the diagnosis of allergic contact dermatitis. The most common allergens detected in children are: metals, topical medicaments, fragrances, and preservatives. The first line management of allergic contact dermatitis in children is to avoid the offending allergens identified with the patch test and a topical corticosteroid therapy.

  8. Characteristic lengths at moving contact lines for a perfectly wetting fluid: the influence of speed on the dynamic contact angle

    OpenAIRE

    Eggers, Jens; Stone, Howard A.

    2002-01-01

    It is common to relate the dynamic contact angle $\\theta_d$ to the relative speed between the substrate and the contact line; theory suggests $\\theta_d^3 \\propto U$. In fact, available physical models show that the dynamic angle involves speed logarithmically and in a model dependent manner. Experimental data consistent with this interpretation is cited.

  9. [Contact dermatitis from Agave americana].

    Science.gov (United States)

    de la Cueva, Pablo; González-Carrascosa, Mateo; Campos, Minia; Leis, Vicente; Suárez, Ricardo; Lázaro, Pablo

    2005-10-01

    Numerous plant species and their derivatives can cause skin reactions through a variety of mechanisms: irritative contact dermatitis, allergic contact dermatitis, contact urticaria and photodermatitis. We present a case of irritative contact dermatitis after exposure to the sap of Agave americana. The skin symptoms in this case have only been described on rare occasions; although this condition usually presents with a papulovesicular rash, in this patient it appeared as purpuric lesions in the contact area.

  10. Numerical Simulation of Dynamic Contact Angles and Contact Lines in Multiphase Flows using Level Set Method

    Science.gov (United States)

    Pendota, Premchand

    Many physical phenomena and industrial applications involve multiphase fluid flows and hence it is of high importance to be able to simulate various aspects of these flows accurately. The Dynamic Contact Angles (DCA) and the contact lines at the wall boundaries are a couple of such important aspects. In the past few decades, many mathematical models were developed for predicting the contact angles of the inter-face with the wall boundary under various flow conditions. These models are used to incorporate the physics of DCA and contact line motion in numerical simulations using various interface capturing/tracking techniques. In the current thesis, a simple approach to incorporate the static and dynamic contact angle boundary conditions using the level set method is developed and implemented in multiphase CFD codes, LIT (Level set Interface Tracking) (Herrmann (2008)) and NGA (flow solver) (Desjardins et al (2008)). Various DCA models and associated boundary conditions are reviewed. In addition, numerical aspects such as the occurrence of a stress singularity at the contact lines and grid convergence of macroscopic interface shape are dealt with in the context of the level set approach.

  11. Contact of surfaces and contact characteristics of offset surfaces

    Institute of Scientific and Technical Information of China (English)

    Lixin CAO; Hu GONG; Jian LIU

    2008-01-01

    Based on differential geometry, the contact problems of two surfaces are discussed in this paper. The relationship between the contact status of two sur-faces and that of offset surfaces are also analyzed. For a 5-axis NC machining, some research such as optimization of cutter location and calculation of the geometrical cusp height are important. The research results indicate that the relative normal curvature is an important geometrical invariant for describing the contact state of two surfaces. For point contact two surfaces, the calculation equation for the second order remained error is given. For line contact two surfaces, the condition of the second order line contact is that the principal directions and curvatures of the two surfaces are the same along the contact curve. If two surfaces keep the second order line contact, their two offset surfaces will also keep the second order line contact, and their third order remained errors are also uniform with that of the two offset surfaces.

  12. Contact Graph Routing

    Science.gov (United States)

    Burleigh, Scott C.

    2011-01-01

    Contact Graph Routing (CGR) is a dynamic routing system that computes routes through a time-varying topology of scheduled communication contacts in a network based on the DTN (Delay-Tolerant Networking) architecture. It is designed to enable dynamic selection of data transmission routes in a space network based on DTN. This dynamic responsiveness in route computation should be significantly more effective and less expensive than static routing, increasing total data return while at the same time reducing mission operations cost and risk. The basic strategy of CGR is to take advantage of the fact that, since flight mission communication operations are planned in detail, the communication routes between any pair of bundle agents in a population of nodes that have all been informed of one another's plans can be inferred from those plans rather than discovered via dialogue (which is impractical over long one-way-light-time space links). Messages that convey this planning information are used to construct contact graphs (time-varying models of network connectivity) from which CGR automatically computes efficient routes for bundles. Automatic route selection increases the flexibility and resilience of the space network, simplifying cross-support and reducing mission management costs. Note that there are no routing tables in Contact Graph Routing. The best route for a bundle destined for a given node may routinely be different from the best route for a different bundle destined for the same node, depending on bundle priority, bundle expiration time, and changes in the current lengths of transmission queues for neighboring nodes; routes must be computed individually for each bundle, from the Bundle Protocol agent's current network connectivity model for the bundle s destination node (the contact graph). Clearly this places a premium on optimizing the implementation of the route computation algorithm. The scalability of CGR to very large networks remains a research topic

  13. /Au Back Contacts

    Science.gov (United States)

    Paudel, Naba R.; Compaan, Alvin D.; Yan, Yanfa

    2014-08-01

    We report on the fabrication and characterization of CdTe thin-film solar cells with Cu-free MoO3- x /Au back contacts. CdTe solar cells with sputtered CdTe absorbers of thicknesses from 0.5 to 1.75 μm were fabricated on Pilkington SnO2:F/SnO2-coated soda-lime glasses coated with a 60- to 80-nm sputtered CdS layer. The MoO3- x /Au back contact layers were deposited by thermal evaporation. The incorporation of MoO3- x layer was found to improve the open circuit voltage ( V OC) but reduce the fill factor of the ultrathin CdTe cells. The V OC was found to increase as the CdTe thickness increased.

  14. Contact stress sensor

    Science.gov (United States)

    Kotovsky, Jack [Oakland, CA

    2012-02-07

    A contact stress sensor includes one or more MEMS fabricated sensor elements, where each sensor element of includes a thin non-recessed portion, a recessed portion and a pressure sensitive element adjacent to the recessed portion. An electric circuit is connected to the pressure sensitive element. The circuit includes a thermal compensator and a pressure signal circuit element configured to provide a signal upon movement of the pressure sensitive element.

  15. Occupational protein contact dermatitis.

    Science.gov (United States)

    Barbaud, Annick; Poreaux, Claire; Penven, Emmanuelle; Waton, Julie

    2015-01-01

    Occupational contact dermatitis is generally caused by haptens but can also be induced by proteins causing mainly immunological contact urticaria (ICU); chronic hand eczema in the context of protein contact dermatitis (PCD). In a monocentric retrospective study, from our database, only 31 (0.41%) of patients with contact dermatitis had positive skin tests with proteins: 22 had occupational PCD, 3 had non-occupational PCD, 5 occupational ICU and 1 cook had a neutrophilic fixed food eruption (NFFE) due to fish. From these results and analysis of literature, the characteristics of PCD can be summarized as follows. It is a chronic eczematous dermatitis, possibly exacerbated by work, suggestive if associated with inflammatory perionyxix and immediate erythema with pruritis, to be investigated when the patient resumes work after a period of interruption. Prick tests with the suspected protein-containing material are essential, as patch tests have negative results. In case of multisensitisation revealed by prick tests, it is advisable to analyse IgE against recombinant allergens. A history of atopy, found in 56 to 68% of the patients, has to be checked for. Most of the cases are observed among food-handlers but PCD can also be due to non-edible plants, latex, hydrolysed proteins or animal proteins. Occupational exposure to proteins can thus lead to the development of ICU. Reflecting hypersensitivity to very low concentrations of allergens, investigating ICU therefore requires caution and prick tests should be performed with a diluted form of the causative protein-containing product. Causes are food, especially fruit peel, non-edible plants, cosmetic products, latex, animals.

  16. Contact stress sensor

    Science.gov (United States)

    Kotovsky, Jack

    2014-02-11

    A method for producing a contact stress sensor that includes one or more MEMS fabricated sensor elements, where each sensor element of includes a thin non-recessed portion, a recessed portion and a pressure sensitive element adjacent to the recessed portion. An electric circuit is connected to the pressure sensitive element. The circuit includes a pressure signal circuit element configured to provide a signal upon movement of the pressure sensitive element.

  17. Pediatric contact dermatitis.

    Science.gov (United States)

    Sharma, Vinod K; Asati, Dinesh P

    2010-01-01

    Allergic contact dermatitis (ACD) in children, until recently, was considered rare. ACD was considered as a disorder of the adult population and children were thought to be spared due to a lack of exposure to potential allergens and an immature immune system. Prevalence of ACD to even the most common allergens in children, like poison ivy and parthenium, is relatively rare as compared to adults. However, there is now growing evidence of contact sensitization of the pediatric population, and it begins right from early childhood, including 1-week-old neonates. Vaccinations, piercing, topical medicaments and cosmetics in younger patients are potential exposures for sensitization. Nickel is the most common sensitizer in almost all studies pertaining to pediatric contact dermatitis. Other common allergens reported are cobalt, fragrance mix, rubber, lanolin, thiomersol, neomycin, gold, mercapto mix, balsum of Peru and colophony. Different factors like age, sex, atopy, social and cultural practices, habit of parents and caregivers and geographic changes affect the patterns of ACD and their variable clinical presentation. Patch testing should be considered not only in children with lesions of a morphology suggestive of ACD, but in any child with dermatitis that is difficult to control.

  18. Pediatric contact dermatitis

    Directory of Open Access Journals (Sweden)

    Sharma Vinod

    2010-01-01

    Full Text Available Allergic contact dermatitis (ACD in children, until recently, was considered rare. ACD was considered as a disorder of the adult population and children were thought to be spared due to a lack of exposure to potential allergens and an immature immune system. Prevalence of ACD to even the most common allergens in children, like poison ivy and parthenium, is relatively rare as compared to adults. However, there is now growing evidence of contact sensitization of the pediatric population, and it begins right from early childhood, including 1-week-old neonates. Vaccinations, piercing, topical medicaments and cosmetics in younger patients are potential exposures for sensitization. Nickel is the most common sensitizer in almost all studies pertaining to pediatric contact dermatitis. Other common allergens reported are cobalt, fragrance mix, rubber, lanolin, thiomersol, neomycin, gold, mercapto mix, balsum of Peru and colophony. Different factors like age, sex, atopy, social and cultural practices, habit of parents and caregivers and geographic changes affect the patterns of ACD and their variable clinical presentation. Patch testing should be considered not only in children with lesions of a morphology suggestive of ACD, but in any child with dermatitis that is difficult to control.

  19. A robust polynomial fitting approach for contact angle measurements.

    Science.gov (United States)

    Atefi, Ehsan; Mann, J Adin; Tavana, Hossein

    2013-05-14

    Polynomial fitting to drop profile offers an alternative to well-established drop shape techniques for contact angle measurements from sessile drops without a need for liquid physical properties. Here, we evaluate the accuracy of contact angles resulting from fitting polynomials of various orders to drop profiles in a Cartesian coordinate system, over a wide range of contact angles. We develop a differentiator mask to automatically find a range of required number of pixels from a drop profile over which a stable contact angle is obtained. The polynomial order that results in the longest stable regime and returns the lowest standard error and the highest correlation coefficient is selected to determine drop contact angles. We find that, unlike previous reports, a single polynomial order cannot be used to accurately estimate a wide range of contact angles and that a larger order polynomial is needed for drops with larger contact angles. Our method returns contact angles with an accuracy of contact angles in a wide range with a fourth-order polynomial. We show that this approach returns dynamic contact angles with less than 0.7° error as compared to ADSA-P, for the solid-liquid systems tested. This new approach is a powerful alternative to drop shape techniques for estimating contact angles of drops regardless of drop symmetry and without a need for liquid properties.

  20. Dual contact pogo pin assembly

    Energy Technology Data Exchange (ETDEWEB)

    Hatch, Stephen McGarry

    2016-06-21

    A contact assembly includes a base and a pair of electrical contacts supported by the base. A first end of the first electrical contact corresponds to a first end of the base and is configured to engage a first external conductive circuit element. A first end of the second electrical contact also corresponds to the first end of the base and is configured to engage a second external conductive circuit element. The first contact and the second contact are electrically isolated from one another and configured to compress when engaging an external connector element. The base includes an aperture positioned on a second end of the base outboard of a second end of the first and second electrical contacts. The aperture presents a narrowing shape with a wide mouth distal the electrical contacts and a narrow internal through-hole proximate the electrical contacts.

  1. Mechanical Contact Experiments and Simulations

    DEFF Research Database (Denmark)

    Nielsen, Chris Valentin; Martins, P; Zhang, W.

    2011-01-01

    geometries and different materials are analyzed including contact between dissimilar materials. The numerical implementation is performed with a finite element computer program based on the irreducible flow formulation, and contact between deformable objects is modelled by applying the penalty method....... The overall investigation serves for testing and validating the numerical implementation of the mechanical contact, which is one of the main contributions to a system intended for 3D simulation of resistance welding. Correct modelling of contact between parts to be welded, as well as contact with electrodes......, is crucial for satisfactory modelling of the resistance welding process. The resistance heating at the contact interfaces depends on both contact area and pressure, and as the contact areas develop dynamically, the presented tests are relevant for assessing the validity and accuracy of the mechanical contact...

  2. Allergic contact cheilitis due to lipstick

    Directory of Open Access Journals (Sweden)

    Yatty Ravitasari

    2015-12-01

    Full Text Available Background: Cheilitis is a common problem of unknown etiology. A possible cause of cheilitis is contact allergy. Drugs, lipsticks, sunblock and toothpaste are the most common implicated allergens. Allergic contact cheilitis is a chronic superficial inflammatory disorder of the vermilion borders characterized by desquamation due to delayed-type hypersensitivity reaction. Purpose: We report a management of Allergic contact cheilitis due to lipsticks. Case: A 21-year-old woman had a history of atopic allergy to eggs, milk, and chicken presented with sore, dry, fissured, scaled and sometimes bleeding lip, over a 3-month period after application of a lipstick. Her symptoms persisted despite treatments with hydrocortisone cream. The patient provided a detailed history and underwent physical examination and patch tests to cosmetic components and patch test to her own lipstick. The patient had strongly-positive result to the tested lipstick. A diagnosis of allergic contact cheilitis was made based on the history and clinical findings. Case management: Patient was advised to avoid wearing lipstick. To relieve symptoms, treatment was initiated with combined topical corticosteroid, antibiotic, and moisturizer. Conclusion: Contact allergy patients should be tested for both cosmetic component series and their own lipsticks to exclude exfolliative cheilitis, infection, or light actinic cheilitis as causal agents.

  3. Contextualizing Intergroup Contact: Do Political Party Cues Enhance Contact Effects?

    DEFF Research Database (Denmark)

    Sønderskov, Kim Mannemar; Thomsen, Jens Peter Frølund

    2015-01-01

    political parties on us-them categorizations heightens the awareness of group memberships. This focus in turn enhances the positive intergroup contact effect by stimulating majority members to perceive contacted persons as prototypical outgroup members. A multilevel analysis of 22 countries and almost 37......,000 individuals confirms that the ability of intergroup contact to reduce antiforeigner sentiment increases when political parties focus intensively on immigration issues and cultural differences. Specifically, both workplace contact and interethnic friendship become more effective in reducing antiforeigner...

  4. Elastohydrodynamics of contact in adherent sheets

    OpenAIRE

    Carlson, Andreas; Mandre, Shreyas; Mahadevan, L

    2015-01-01

    Adhesive contact between a thin elastic sheet and a substrate in a liquid environment arises in a range of biological, physical and technological applications. By considering the dynamics of this process that naturally couples fluid flow, long wavelength elastic deformations and microscopic adhesion, and solving the resulting partial differential equation numerically, we uncover the short-time dynamics of the onset of adhesion and the long-time dynamics of a steady propagating adhesion front....

  5. On accurate determination of contact angle

    Science.gov (United States)

    Concus, P.; Finn, R.

    1992-01-01

    Methods are proposed that exploit a microgravity environment to obtain highly accurate measurement of contact angle. These methods, which are based on our earlier mathematical results, do not require detailed measurement of a liquid free-surface, as they incorporate discontinuous or nearly-discontinuous behavior of the liquid bulk in certain container geometries. Physical testing is planned in the forthcoming IML-2 space flight and in related preparatory ground-based experiments.

  6. Motivation for social contact in horses measured by operant conditioning

    DEFF Research Database (Denmark)

    Søndergaard, Eva; Jensen, Margit Bak; Nicol, Christine J.

    2011-01-01

    Although horses are social animals they are often housed individually with limited social contact to other horses and this may compromise their welfare. The present study included eight young female horses and investigated the strength of motivation for access to full social contact, head contact...... and muzzle contact, respectively, to a familiar companion horse. Horses were housed individually next to their companion horse and separations between pens prevented physical contact. During daily test sessions horses were brought to a test area where they could access an arena allowing social contact. Arena...... access during 3 min was given after completion of a predetermined number of responses on a panel. Fixed ratios (FR) of 8, 16, 24, 32 and 40 responses per arena access were applied in a random order, one per daily test session, within each test week (Monday to Friday), and the number of rewards per daily...

  7. Contact dermatitis in Nigeria.

    Science.gov (United States)

    Olumide, Y M

    1985-05-01

    Nickel is the most important sensitizer in Lagos, with an incidence of 12.3% of 453 patients tested. There was no sex difference, as the wearing of necklaces and bracelets was equally fashionable among both sexes. Housewife eczema is not common, probably because of hardening. Dermatitis from additives in the processing of leather and rubber footwear was the next most common. Chromate sensitivity comes usually from leather or cement. Cultural and climatic factors are mainly responsible for differences in the incidence of contact dermatitis found in Lagos from other countries.

  8. Contact Control, Version 1

    Energy Technology Data Exchange (ETDEWEB)

    2016-07-21

    The contact control code is a generalized force control scheme meant to interface with a robotic arm being controlled using the Robot Operating System (ROS). The code allows the user to specify a control scheme for each control dimension in a way that many different control task controllers could be built from the same generalized controller. The input to the code includes maximum velocity, maximum force, maximum displacement, and a control law assigned to each direction and the output is a 6 degree of freedom velocity command that is sent to the robot controller.

  9. Thermal contact conductance

    CERN Document Server

    Madhusudana, Chakravarti V

    2013-01-01

    The work covers both theoretical and practical aspects of thermal contact conductance. The theoretical discussion focuses on heat transfer through spots, joints, and surfaces, as well as the role of interstitial materials (both planned and inadvertent). The practical discussion includes formulae and data that can be used in designing heat-transfer equipment for a variety of joints, including special geometries and configurations. All of the material has been updated to reflect the latest advances in the field.

  10. Contact dermatitis to methylisothiazolinone*

    Science.gov (United States)

    Scherrer, Maria Antonieta Rios; Rocha, Vanessa Barreto; Andrade, Ana Regina Coelho

    2015-01-01

    Methylisothiazolinone (MI) is a preservative found in cosmetic and industrial products. Contact dermatitis caused by either methylchloroisothiazolinone/methylisothiazolinone (MCI/MI or Kathon CG) or MI has shown increasing frequency. The latter is preferably detected through epicutaneous testing with aqueous MI 2000 ppm, which is not included in the Brazilian standard tray. We describe a series of 23 patients tested using it and our standard tray. A case with negative reaction to MCI/MI and positive to MI is emphasized. PMID:26734880

  11. Adhesion in hydrogel contacts

    Science.gov (United States)

    Torres, J. R.; Jay, G. D.; Kim, K.-S.; Bothun, G. D.

    2016-05-01

    A generalized thermomechanical model for adhesion was developed to elucidate the mechanisms of dissipation within the viscoelastic bulk of a hyperelastic hydrogel. Results show that in addition to the expected energy release rate of interface formation, as well as the viscous flow dissipation, the bulk composition exhibits dissipation due to phase inhomogeneity morphological changes. The mixing thermodynamics of the matrix and solvent determines the dynamics of the phase inhomogeneities, which can enhance or disrupt adhesion. The model also accounts for the time-dependent behaviour. A parameter is proposed to discern the dominant dissipation mechanism in hydrogel contact detachment.

  12. Allergic contact dermatitis from octylisothiazolinone

    DEFF Research Database (Denmark)

    Mose, Anja Pahlow; Frost, Simon; Ohlund, Ulf;

    2013-01-01

    Octylisothiazolinone is a biocide that has been reported as a moderate, but rare contact allergen.......Octylisothiazolinone is a biocide that has been reported as a moderate, but rare contact allergen....

  13. Contact Center Manager Administration (CCMA)

    Data.gov (United States)

    Social Security Administration — CCMA is the server that provides a browser-based tool for contact center administrators and supervisors. It is used to manage and configure contact center resources...

  14. Optimal contact definition for reconstruction of Contact Maps

    Directory of Open Access Journals (Sweden)

    Stehr Henning

    2010-05-01

    Full Text Available Abstract Background Contact maps have been extensively used as a simplified representation of protein structures. They capture most important features of a protein's fold, being preferred by a number of researchers for the description and study of protein structures. Inspired by the model's simplicity many groups have dedicated a considerable amount of effort towards contact prediction as a proxy for protein structure prediction. However a contact map's biological interest is subject to the availability of reliable methods for the 3-dimensional reconstruction of the structure. Results We use an implementation of the well-known distance geometry protocol to build realistic protein 3-dimensional models from contact maps, performing an extensive exploration of many of the parameters involved in the reconstruction process. We try to address the questions: a to what accuracy does a contact map represent its corresponding 3D structure, b what is the best contact map representation with regard to reconstructability and c what is the effect of partial or inaccurate contact information on the 3D structure recovery. Our results suggest that contact maps derived from the application of a distance cutoff of 9 to 11Å around the Cβ atoms constitute the most accurate representation of the 3D structure. The reconstruction process does not provide a single solution to the problem but rather an ensemble of conformations that are within 2Å RMSD of the crystal structure and with lower values for the pairwise average ensemble RMSD. Interestingly it is still possible to recover a structure with partial contact information, although wrong contacts can lead to dramatic loss in reconstruction fidelity. Conclusions Thus contact maps represent a valid approximation to the structures with an accuracy comparable to that of experimental methods. The optimal contact definitions constitute key guidelines for methods based on contact maps such as structure prediction through

  15. Systemic contact dermatitis

    Directory of Open Access Journals (Sweden)

    Daria Nowak

    2016-02-01

    Full Text Available Systemic contact dermatitis (SCD is a skin inflammation occurring in a patient after systemic administration of a hapten, which previously caused an allergic contact skin reaction in the same person. Most frequently, hypersensitivity reactions typical for SCD occur after absorption of haptens with food or inhalation. Haptens occur mainly in the forms of metals and compounds present in natural resins, preservatives, food thickeners, flavorings and medicines. For many years, several studies have been conducted on understanding the pathogenesis of SCD in which both delayed type hypersensitivity (type IV and immediate type I are observed. Components of the complement system are also suspected to attend there. Helper T cells (Th (Th1 and Th2, cytotoxic T lymphocytes (Tc, and NK cells play a crucial role in the pathogenesis of SCD. They secrete a number of pro-inflammatory cytokines. In addition, regulatory T cells (Tregs have an important role. They control and inhibit activity of the immune system during inflammation. Tregs release suppressor cytokines and interact directly with a target cell through presentation of immunosuppressive particles at the cell surface. Diagnostic methods are generally the patch test, oral provocation test, elimination diet and lymphocyte stimulation test. There are many kinds of inflammatory skin reactions caused by systemic haptens’ distribution. They are manifested in a variety of clinical phenotypes of the disease.

  16. [Systemic contact dermatitis].

    Science.gov (United States)

    Nowak, Daria; Gomułka, Krzysztof; Dziemieszonek, Paulina; Panaszek, Bernard

    2016-02-25

    Systemic contact dermatitis (SCD) is a skin inflammation occurring in a patient after systemic administration of a hapten, which previously caused an allergic contact skin reaction in the same person. Most frequently, hypersensitivity reactions typical for SCD occur after absorption of haptens with food or inhalation. Haptens occur mainly in the forms of metals and compounds present in natural resins, preservatives, food thickeners, flavorings and medicines. For many years, several studies have been conducted on understanding the pathogenesis of SCD in which both delayed type hypersensitivity (type IV) and immediate type I are observed. Components of the complement system are also suspected to attend there. Helper T cells (Th) (Th1 and Th2), cytotoxic T lymphocytes (Tc), and NK cells play a crucial role in the pathogenesis of SCD. They secrete a number of pro-inflammatory cytokines. In addition, regulatory T cells (Tregs) have an important role. They control and inhibit activity of the immune system during inflammation. Tregs release suppressor cytokines and interact directly with a target cell through presentation of immunosuppressive particles at the cell surface. Diagnostic methods are generally the patch test, oral provocation test, elimination diet and lymphocyte stimulation test. There are many kinds of inflammatory skin reactions caused by systemic haptens' distribution. They are manifested in a variety of clinical phenotypes of the disease.

  17. Systemic contact dermatitis

    Directory of Open Access Journals (Sweden)

    Daria Nowak

    2016-02-01

    Full Text Available Systemic contact dermatitis (SCD is a skin inflammation occurring in a patient after systemic administration of a hapten, which previously caused an allergic contact skin reaction in the same person. Most frequently, hypersensitivity reactions typical for SCD occur after absorption of haptens with food or inhalation. Haptens occur mainly in the forms of metals and compounds present in natural resins, preservatives, food thickeners, flavorings and medicines. For many years, several studies have been conducted on understanding the pathogenesis of SCD in which both delayed type hypersensitivity (type IV and immediate type I are observed. Components of the complement system are also suspected to attend there. Helper T cells (Th (Th1 and Th2, cytotoxic T lymphocytes (Tc, and NK cells play a crucial role in the pathogenesis of SCD. They secrete a number of pro-inflammatory cytokines. In addition, regulatory T cells (Tregs have an important role. They control and inhibit activity of the immune system during inflammation. Tregs release suppressor cytokines and interact directly with a target cell through presentation of immunosuppressive particles at the cell surface. Diagnostic methods are generally the patch test, oral provocation test, elimination diet and lymphocyte stimulation test. There are many kinds of inflammatory skin reactions caused by systemic haptens’ distribution. They are manifested in a variety of clinical phenotypes of the disease.

  18. Dynamic contact angle analysis of silicone hydrogel contact lenses.

    Science.gov (United States)

    Read, Michael Leonard; Morgan, Philip Bruce; Kelly, Jeremiah Michael; Maldonado-Codina, Carole

    2011-07-01

    Contact angle measurements are used to infer the clinical wetting characteristics of contact lenses. Such characterization has become more commonplace since the introduction of silicone hydrogel contact lens materials, which have been associated with reduced in vivo wetting due to the inclusion of siloxane-containing components. Using consistent methodology and a single investigator, advancing and receding contact angles were measured for 11 commercially available silicone hydrogel contact lens types with a dynamic captive bubble technique employing customized, fully automated image analysis. Advancing contact angles were found to range between 20° and 72° with the lenses falling into six statistically discrete groupings. Receding contact angles fell within a narrower range, between 17° and 22°, with the lenses segregated into three groups. The relationship between these laboratory measurements and the clinical performance of the lenses requires further investigation.

  19. Dynamics of the Molten Contact Line

    Science.gov (United States)

    Sonin, Ain A.; Duthaler, Gregg; Liu, Michael; Torresola, Javier; Qiu, Taiqing

    1999-01-01

    The purpose of this program is to develop a basic understanding of how a molten material front spreads over a solid that is below its melting point, arrests, and freezes. Our hope is that the work will contribute toward a scientific knowledge base for certain new applications involving molten droplet deposition, including the "printing" of arbitrary three-dimensional objects by precise deposition of individual molten microdrops that solidify after impact. Little information is available at this time on the capillarity-driven motion and arrest of molten contact line regions. Schiaffino and Sonin investigated the arrest of the contact line of a molten microcrystalline wax spreading over a subcooled solid "target" of the same material. They found that contact line arrest takes place at an apparent liquid contact angle that depends primarily on the Stefan number S=c(T(sub f) -T(sub t)/L based on the temperature difference between the fusion point and the target temperature, and proposed that contact line arrest occurs when the liquid's dynamic contact angle approaches the angle of attack of the solidification front just behind the contact line. They also showed, however, that the conventional continuum equations and boundary conditions have no meaningful solution for this angle. The solidification front angle is determined by the heat flux just behind the contact line, and the heat flux is singular at that point. By comparing experiments with numerical computations, Schiaffino and Sonin estimated that the conventional solidification model must break down within a distance of order 0.1 - 1 microns of the contact line. The physical mechanism for this breakdown is as yet undetermined, and no first-principles theory exists for the contact angle at arrest. Schiaffino and Sonin also presented a framework for understanding how to moderate Weber number molten droplet deposition in terms of similarity laws and experimentation. The study is based on experiments with three molten

  20. Contact and Non-contact Measurements of Grinding Pins

    Directory of Open Access Journals (Sweden)

    Magdziak Marek

    2015-01-01

    Full Text Available The paper presents the results of contact and non-contact measurements of external profiles of selected grinding pins. The measurements were conducted in order to choose the appropriate measuring technique in the case of the considered measurement task. In the case of contact measurements the coordinate measuring machine ACCURA II was applied. The used coordinate measuring machine was equipped with the contact scanning probe VAST XT and the Calypso inspection software. Contact coordinate measurements were performed by using of different measurement strategies. The applied strategies included different scanning velocities and distances between measured points. Non-contact measurements were conducted by means of the tool presetter produced by the Mahr company. On the basis of gained results the guidelines concerning measurements of grinding pins were formulated. The measurements of analyzed grinding pins performed by means of the non-contact measuring system are characterized by higher reproducibility than the contact measurements. The low reproducibility of contact measurements may be connected with the inaccuracy of the selected coordinate measuring machine and the measuring probe, the measurement parameters and environmental conditions in the laboratory where the coordinate measuring machine is located. Moreover, the paper presents the possible application of results of conducted investigations. The results of non-contact measurements can be used in the simulation studies of grinding processes. The simulations may reduce the costs of machining processes.

  1. Reducing contact resistance in graphene devices through contact area patterning.

    Science.gov (United States)

    Smith, Joshua T; Franklin, Aaron D; Farmer, Damon B; Dimitrakopoulos, Christos D

    2013-04-23

    Performance of graphene electronics is limited by contact resistance associated with the metal-graphene (M-G) interface, where unique transport challenges arise as carriers are injected from a 3D metal into a 2D-graphene sheet. In this work, enhanced carrier injection is experimentally achieved in graphene devices by forming cuts in the graphene within the contact regions. These cuts are oriented normal to the channel and facilitate bonding between the contact metal and carbon atoms at the graphene cut edges, reproducibly maximizing "edge-contacted" injection. Despite the reduction in M-G contact area caused by these cuts, we find that a 32% reduction in contact resistance results in Cu-contacted, two-terminal devices, while a 22% reduction is achieved for top-gated graphene transistors with Pd contacts as compared to conventionally fabricated devices. The crucial role of contact annealing to facilitate this improvement is also elucidated. This simple approach provides a reliable and reproducible means of lowering contact resistance in graphene devices to bolster performance. Importantly, this enhancement requires no additional processing steps.

  2. Contact angle and local wetting at contact line.

    Science.gov (United States)

    Li, Ri; Shan, Yanguang

    2012-11-06

    This theoretical study was motivated by recent experiments and theoretical work that had suggested the dependence of the static contact angle on the local wetting at the triple-phase contact line. We revisit this topic because the static contact angle as a local wetting parameter is still not widely understood and clearly known. To further clarify the relationship of the static contact angle with wetting, two approaches are applied to derive a general equation for the static contact angle of a droplet on a composite surface composed of heterogeneous components. A global approach based on the free surface energy of a thermodynamic system containing the droplet and solid surface shows the static contact angle as a function of local surface chemistry and local wetting state at the contact line. A local approach, in which only local forces acting on the contact line are considered, results in the same equation. The fact that the local approach agrees with the global approach further demonstrates the static contact angle as a local wetting parameter. Additionally, the study also suggests that the wetting described by the Wenzel and Cassie equations is also the local wetting of the contact line rather than the global wetting of the droplet.

  3. Mechanical Contact Experiments and Simulations

    DEFF Research Database (Denmark)

    Nielsen, Chris Valentin; Martins, P; Zhang, W.

    2011-01-01

    Mechanical contact is studied under dynamic development by means of a combined numerical and experimental investigation. The experiments are designed to allow dynamical development of non-planar contact areas with significant expansion in all three directions as the load is increased. Different...... geometries and different materials are analyzed including contact between dissimilar materials. The numerical implementation is performed with a finite element computer program based on the irreducible flow formulation, and contact between deformable objects is modelled by applying the penalty method....... The overall investigation serves for testing and validating the numerical implementation of the mechanical contact, which is one of the main contributions to a system intended for 3D simulation of resistance welding. Correct modelling of contact between parts to be welded, as well as contact with electrodes...

  4. Point contacts in encapsulated graphene

    Energy Technology Data Exchange (ETDEWEB)

    Handschin, Clevin [Department of Physics, University of Basel, Klingelbergstrasse 82, CH-4056 Basel (Switzerland); Swiss Nanoscience Institute, Klingelbergstrasse 82, CH-4056 Basel (Switzerland); Fülöp, Bálint; Csonka, Szabolcs [Department of Physics, Budapest University of Technology and Economics and Condensed Matter Research Group of the Hungarian Academy of Sciences, Budafoki ut 8, 1111 Budapest (Hungary); Makk, Péter; Blanter, Sofya; Weiss, Markus; Schönenberger, Christian, E-mail: Christian.Schoenenberger@unibas.ch [Department of Physics, University of Basel, Klingelbergstrasse 82, CH-4056 Basel (Switzerland); Watanabe, Kenji; Taniguchi, Takashi [National Institute for Material Science, 1-1 Namiki, Tsukuba 305-0044 (Japan)

    2015-11-02

    We present a method to establish inner point contacts with dimensions as small as 100 nm on hexagonal boron nitride (hBN) encapsulated graphene heterostructures by pre-patterning the top-hBN in a separate step prior to dry-stacking. 2- and 4-terminal field effect measurements between different lead combinations are in qualitative agreement with an electrostatic model assuming point-like contacts. The measured contact resistances are 0.5–1.5 kΩ per contact, which is quite low for such small contacts. By applying a perpendicular magnetic field, an insulating behaviour in the quantum Hall regime was observed, as expected for inner contacts. The fabricated contacts are compatible with high mobility graphene structures and open up the field for the realization of several electron optical proposals.

  5. Hair dye contact allergy

    DEFF Research Database (Denmark)

    Søsted, Heidi; Rastogi, Suresh Chandra; Andersen, Klaus Ejner

    2004-01-01

    Colouring of hair can cause severe allergic contact dermatitis. The most frequently reported hair dye allergens are p-phenylenediamine (PPD) and toluene-2,5-diamine, which are included in, respectively, the patch test standard series and the hairdressers series. The aim of the present study...... was to identify dye precursors and couplers in hair dyeing products causing clinical hair dye dermatitis and to compare the data with the contents of these compounds in a randomly selected set of similar products. The patient material comprised 9 cases of characteristic clinical allergic hair dye reaction, where...... exposure history and patch testing had identified a specific hair dye product as the cause of the reaction. The 9 products used by the patients were subjected to chemical analysis. 8 hair dye products contained toluene-2,5-diamine (0.18 to 0.98%). PPD (0.27%) was found in 1 product, and m-aminophenol (0...

  6. Contact dermatitis to Alstroemeria.

    Science.gov (United States)

    Santucci, B; Picardo, M; Iavarone, C; Trogolo, C

    1985-04-01

    A study was carried out on 50 workers in a floriculture centre to evaluate the incidence of contact dermatitis to Alstroemeria. 3 subjects gave positive reactions to aqueous and ethanolic extracts of cut flowers, stems and leaves. By column chromatography, the allergen was isolated and its chemical structure identified as 6-tuliposide A by proton magnetic resonance and carbon-13 magnetic resonance. Only 6-tuliposide A was isolated from cut flowers, and this gave positive reactions when patch tested at 0.01%; a-methylene-gamma-butyrolactone at 10(-5) (v/v) was positive in the same 3 subjects. Other lactones (gamma-methylene-gamma-butyrolactone, alantolactone, isoalantolactone) were negative at all concentrations used.

  7. Fragrance contact allergy

    DEFF Research Database (Denmark)

    Johansen, Jeanne D

    2003-01-01

    in the same products. This means that it is difficult to avoid exposure, as products labelled as 'fragrance free' have also been shown to contain fragrance ingredients, either because of the use of fragrance ingredients as preservatives or masking perfumes, or the use of botanicals. About 2500 different...... typically have a history of rash to a fine fragrance or scented deodorants. Chemical analysis has revealed that well known allergens from the fragrance mix are present in 15-100% of cosmetic products, including deodorants and fine fragrances, and most often in combinations of three to four allergens...... fragrance ingredients are currently used in the composition of perfumes and at least 100 of these are known contact allergens. Therefore, it is advisable to supplement standard patch testing with the patient's own stay-on cosmetic products, as well as the fragrance chemical hydroxyisohexyl-3-cyclohexane...

  8. Fragrance contact allergy

    DEFF Research Database (Denmark)

    Johansen, Jeanne D

    2003-01-01

    typically have a history of rash to a fine fragrance or scented deodorants. Chemical analysis has revealed that well known allergens from the fragrance mix are present in 15-100% of cosmetic products, including deodorants and fine fragrances, and most often in combinations of three to four allergens...... in the same products. This means that it is difficult to avoid exposure, as products labelled as 'fragrance free' have also been shown to contain fragrance ingredients, either because of the use of fragrance ingredients as preservatives or masking perfumes, or the use of botanicals. About 2500 different...... fragrance ingredients are currently used in the composition of perfumes and at least 100 of these are known contact allergens. Therefore, it is advisable to supplement standard patch testing with the patient's own stay-on cosmetic products, as well as the fragrance chemical hydroxyisohexyl-3-cyclohexane...

  9. Cosmetic Contact Allergens

    Directory of Open Access Journals (Sweden)

    An Goossens

    2016-02-01

    Full Text Available This article presents trends in the frequency of cosmetics as causal factors of allergic contact dermatitis during a 26-year period in 14,911 patients patch-tested between 1990 and 2014, and discusses the cosmetic allergens identified during the last six years (2010–2015 in 603 patients out of 3105 tested. The data were retrieved from, and evaluated with, a patient database developed in-house. The results show the increasing importance of cosmetic allergies, up to 25% of the patients tested during the last five-year period. As expected, fragrance materials, preservatives, and hair dyes were the most frequent culprits, but a great variety of other allergenic ingredients were involved as well. This underlines the need of additional and extensive patch testing with the patient’s products used and their ingredients.

  10. Mechanoluminescent Contact Type Sensor

    Directory of Open Access Journals (Sweden)

    A. K. Yefremov

    2017-01-01

    Full Text Available Mechanoluminescent sensing elements convert mechanical stress into optical radiation. Advantages of such sensors are the ability to generate an optical signal, solid-state, simple structure, and resistance to electromagnetic interference. Mechanoluminescent sensor implementations can possess the concentrated and distributed sensitivity, thereby allowing us to detect the field of mechanical stresses distributed across the area and in volume. Most modern semiconductor photo-detectors can detect mechanoluminescent radiation, so there are no difficulties to provide its detection when designing the mechanoluminescent sensing devices. Mechanoluminescent substances have especial sensitivity to shock loads, and this effect can be used to create a fuse the structure of which includes a target contact type sensor with a photosensitive actuator. The paper briefly describes the theoretical basics of mechanoluminiscence: a light signal emerges from the interaction of crystalline phosphor luminescence centers with electrically charged dislocations, moving due to the deformation of the crystal. A mathematical model of the mechanoluminescent conversion is represented as a functional interaction between parameters of the mechanical shock excitation and the sensor light emission. Examples of computing the optical mechanoluminescent output signal depending on the duration and peak level of impulse load are given. It is shown that the luminous flux, generated by mechanoluminescent sensing element when there is an ammunition-target collision causes the current emerging in photo-detector (photodiode that is sufficient for a typical actuator of the fuse train to operate. The potential possibility to create a contact target type sensor based on the light-sensitive mechanoluminescent sensor was proved by the calculation and simulation results.

  11. A CONTACT SEARCHING ALGORITHM FOR CONTACT-IMPACT PROBLEMS

    Institute of Scientific and Technical Information of China (English)

    Wang Fujun; Cheng Jiangang; Yao Zhenhan

    2000-01-01

    A new contact searching algorithm for contact-impact systems is proposed in this paper. In terms of the cell structure and the linked-list, this algorithm solves the problem of sorting and searching contacts in three dimensions by transforming it to a retrieving process from two one-dimensional arrays, and binary searching is no longer required. Using this algorithm, the cost of contact searching is reduced to the order of O(N) instead of O(Nlog2N) for traditional ones, where N is the node number in the system. Moreover, this algorithm can handle contact systems with arbitrary mesh layouts. Due to the simplicity of this algorithm it can be easily implemented in a dynamic explicit finite element Program. Our numerical experimental result shows that this algorithm is reliable and efficient for contact searching of three dimensional systems.

  12. Fabricating a n+-Ge contact with ultralow specific contact resistivity by introducing a PtGe alloy as a contact metal

    Science.gov (United States)

    Hsu, C. C.; Chou, C. H.; Wang, S. Y.; Chi, W. C.; Chien, C. H.; Luo, G. L.

    2015-09-01

    In this study, we developed an Ohmic contact structure to an in situ n+-Ge film that has an ultralow specific contact resistivity of [(6.8 ±2.1 ) ×10-8 Ωṡcm2] . This structure was developed by introducing a PtGe alloy as the contact metal. We observed that Ohmic contact behavior can be achieved with several other metals, and the contact resistance is related to the work function of the metal. A physical model of the band diagram was created for the Schottky tunneling width, which can provide insight into the validation and explanation of work function-dependent specific contact resistivity. Dopant segregation at the interface and increased interface roughness induced by the formation of the alloy are crucial in further reducing the specific contact resistivity. As a result, a stable PtGe alloy and high doping concentration in Ge are critical in pursuing a lower contact resistance for a Ge n-channel device.

  13. Robust Algorithms for Contact Problems with Constitutive Contact Laws

    OpenAIRE

    2016-01-01

    This thesis is concerned with the solution of contact problems with advanced Coulomb friction in the 3D case using the finite element method. A Lagrange multiplier method modelling the contact traction is employed and the contact conditions are enforced in a weak sense leading to a surface-to-surface discretization. Here more precisely the dual mortar method is used allowing for a static condensation of the additional variables in the system before solving without loosing the optimality of...

  14. Hysteresis during contact angles measurement.

    Science.gov (United States)

    Diaz, M Elena; Fuentes, Javier; Cerro, Ramon L; Savage, Michael D

    2010-03-15

    A theory, based on the presence of an adsorbed film in the vicinity of the triple contact line, provides a molecular interpretation of intrinsic hysteresis during the measurement of static contact angles. Static contact angles are measured by placing a sessile drop on top of a flat solid surface. If the solid surface has not been previously in contact with a vapor phase saturated with the molecules of the liquid phase, the solid surface is free of adsorbed liquid molecules. In the absence of an adsorbed film, molecular forces configure an advancing contact angle larger than the static contact angle. After some time, due to an evaporation/adsorption process, the interface of the drop coexists with an adsorbed film of liquid molecules as part of the equilibrium configuration, denoted as the static contact angle. This equilibrium configuration is metastable because the droplet has a larger vapor pressure than the surrounding flat film. As the drop evaporates, the vapor/liquid interface contracts and the apparent contact line moves towards the center of the drop. During this process, the film left behind is thicker than the adsorbed film and molecular attraction results in a receding contact angle, smaller than the equilibrium contact angle.

  15. HARDINESS, WORLD ASSUMPTIONS, MOTIVATION OF ATHLETES OF CONTACT AND NOT CONTACT KINDS OF SPORT

    Directory of Open Access Journals (Sweden)

    Elena Vladimirovna Molchanova

    2017-04-01

    Full Text Available Investigation of personal psychological specificity of athletes of contact (freestyle wrestling and not contact (archery kinds of sport were carried out. Pronounced deviation in hardiness, world assumptions, motives for sport doing were obtained. In particularly, archery athletes possess higher values of hardiness and positively view the world, than wrestlers, while possess less motives for sport doing as “successful for life quality and skills” and “physical perfection”. Thus for athletes not contact kinds of sports rather coping in permanent stressed conditions are predicted. The obtained results are practically important for counseling work of sport psychologists and moreover they could be a basement for training teach programs and challenge stress overcoming programs.

  16. Contact sport and osteoarthritis.

    LENUS (Irish Health Repository)

    Molloy, Michael G

    2011-04-01

    Osteoarthritis (OA) is the most common joint disease in the world and the single largest cause of disability for those over 18 years. It affects more than twice as many people as does cardiac disease, and increases in incidence and prevalence with age. Animal and human studies have shown no evidence of increased risk of hip or knee OA with moderate exercise and in the absence of traumatic injury, sporting activity has a protective effect. One age-matched case control study found recreational runners who ran 12-14 miles per week for up to 40 years had no increase in radiological or symptomatic hip or knee OA. However, higher rates of hip OA occur in contact sports than in age-matched controls, with the highest rate in professional players. Soccer players with torn anterior cruciate ligaments (ACL) are more likely to develop knee OA than those with intact ACL. Early ACL repair reduces the risk of knee OA, but does not prevent it. Established injury prevention programmes have been refined to prevent injuries such as ACL rupture.

  17. Contacting nanowires and nanotubes with atomic precision for electronic transport

    KAUST Repository

    Qin, Shengyong

    2012-01-01

    Making contacts to nanostructures with atomic precision is an important process in the bottom-up fabrication and characterization of electronic nanodevices. Existing contacting techniques use top-down lithography and chemical etching, but lack atomic precision and introduce the possibility of contamination. Here, we report that a field-induced emission process can be used to make local contacts onto individual nanowires and nanotubes with atomic spatial precision. The gold nano-islands are deposited onto nanostructures precisely by using a scanning tunneling microscope tip, which provides a clean and controllable method to ensure both electrically conductive and mechanically reliable contacts. To demonstrate the wide applicability of the technique, nano-contacts are fabricated on silicide atomic wires, carbon nanotubes, and copper nanowires. The electrical transport measurements are performed in situ by utilizing the nanocontacts to bridge the nanostructures to the transport probes. © 2012 American Institute of Physics.

  18. Noise of sliding rough contact

    Science.gov (United States)

    Le Bot, Alain

    2017-01-01

    This article is a discussion about the origin of friction noise produced when rubbing solids having rough surfaces. We show that noise emerges from numerous impacts into the contact between antagonist asperities of surfaces. Prediction of sound sources reduces to a statistical problem of contact mechanics. On the other hand, contact is also responsible of dissipation of vibration. This leads to the paradoxical result that the noise may not be proportional to the number of sources.

  19. Non-contacting "snubber bearing" for passive magnetic bearing systems

    Energy Technology Data Exchange (ETDEWEB)

    Post, Richard F

    2017-08-22

    A new non-contacting magnetic "snubber" bearing is provided for application to rotating systems such as vehicular electromechanical battery systems subject to frequent accelerations. The design is such that in the equilibrium position the drag force of the snubber is very small (milliwatts). However in a typical case, if the rotor is displaced by as little as 2 millimeters a large restoring force is generated without any physical contact between the stationary and rotating parts of the snubber bearing.

  20. Prentice Medal lecture: contact lens wettability--myths, mysteries, and realities.

    Science.gov (United States)

    Fatt, I

    1984-07-01

    The author shows that the wetting of contact lens on the eye is a complex process. Measuring the contact angle is possible by several techniques but knowing the contact angles (advancing and receding) is not enough to define wettability in scientific terms. A contact lens on the eye, bathed in lacrimal fluids and subjected to a number of pressures, presents a challenging problem in physics as well as in clinical vision care.

  1. Critical Points of Contact

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Morelli, Nicola

    2011-01-01

    In contemporary urban societies multiple networks and systems interact, overlap, exist in parallel, converge, conflict etc. creating unforeseen complexity and less transparency. By exploring how layered networks of physical movement, service information, goods delivery, commercial communication etc...... design, geography, and mobility studies. After the introduction in section we develop and define the notion of CPC based upon a broad set of disciplines and theories. We illustrate the usefulness of the notion within the field of mobility in the network city and within the field of service design...

  2. Ion Implanted Passivated Contacts for Interdigitated Back Contacted Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Young, David L.; Nemeth, William; LaSalvia, Vincenzo; Reedy, Robert; Bateman, Nicholas; Stradins, Pauls

    2015-06-14

    We describe work towards an interdigitated back contacted (IBC) solar cell utilizing ion implanted, passivated contacts. Formation of electron and hole passivated contacts to n-type CZ wafers using tunneling SiO2 and ion implanted amorphous silicon (a-Si) are described. P and B were ion implanted into intrinsic amorphous Si films at several doses and energies. A series of post-implant anneals showed that the passivation quality improved with increasing annealing temperatures up to 900 degrees C. The recombination parameter, Jo, as measured by a Sinton lifetime tester, was Jo ~ 14 fA/cm2 for Si:P, and Jo ~ 56 fA/cm2 for Si:B contacts. The contact resistivity for the passivated contacts, as measured by TLM patterns, was 14 milliohm-cm2 for the n-type contact and 0.6 milliohm-cm2 for the p-type contact. These Jo and pcontact values are encouraging for forming IBC cells using ion implantation to spatially define dopants.

  3. Contextualizing Intergroup Contact: Do Political Party Cues Enhance Contact Effects?

    DEFF Research Database (Denmark)

    Sønderskov, Kim Mannemar; Thomsen, Jens Peter Frølund

    2015-01-01

    This article examines intergroup contact effects in different political contexts. We expand on previous efforts of social psychologists by incorporating the messages of political parties as a contextual trigger of group membership awareness in contact situations. We argue that the focus among...

  4. Contact angle hysteresis of a drop spreading over metal surfaces

    Directory of Open Access Journals (Sweden)

    Kuznetsov Geniy

    2016-01-01

    Full Text Available The paper presents experimental data on the contact angle hysteresis of the distilled water drop spreading over the surfaces of non-ferrous metals. The measurements of the advancing and receding contact angles were carried out by method of sitting drop on the horizontal surface during increasing and decreasing drop volume with a syringe pump. It was found that the contact line speed has a great influence on the hysteresis of the polished non-elastic substrates. The mechanism of spreading was described using the balance of the forces from the physical point of view.

  5. Two Mode Resonator and Contact Model for Standing Wave Piezomotor

    DEFF Research Database (Denmark)

    Andersen, B.; Blanke, Mogens; Helbo, J.

    2001-01-01

    The paper presents a model for a standing wave piezoelectric motor with a two bending mode resonator. The resonator is modelled using Hamilton's principle and the Rayleigh-Ritz method. The contact is modelled using the Lagrange Multiplier method under the assumption of slip and it is showed how...... to solve the set of differential-algebraic equations. Detailled simulations show resonance frequencies as function of the piezoelement's position, tip trajectories and contact forces. The paper demonstrates that contact stiffness and stick should be included in such model to obtain physically realistic...

  6. Contact materials for nanowire devices and nanoelectromechanical switches

    KAUST Repository

    Hussain, Muhammad Mustafa

    2011-02-01

    The impact of contact materials on the performance of nanostructured devices is expected to be signifi cant. This is especially true since size scaling can increase the contact resistance and induce many unseen phenomenon and reactions that greatly impact device performance. Nanowire and nanoelectromechanical switches are two emerging nanoelectronic devices. Nanowires provide a unique opportunity to control the property of a material at an ultra-scaled dimension, whereas a nanoelectromechanical switch presents zero power consumption in its off state, as it is physically detached from the sensor anode. In this article, we specifi cally discuss contact material issues related to nanowire devices and nanoelectromechanical switches.

  7. CISM Course on Rolling Contact Phenomena

    CERN Document Server

    Kalker, Joost

    2000-01-01

    Preface.- Rolling Contact Phenomena - Linear Elasticity.- Finite Element Methods for Rolling Contact.- Plastic Deformation in Rolling Contact.- Non-Steady State Rolling Contact and Corrugations.- Modelling of Tyre Force and Moment Generation.- Rolling Noise.- Lubrication

  8. Contact line and contact angle dynamics in superhydrophobic channels.

    Science.gov (United States)

    Zhang, Junfeng; Kwok, Daniel Y

    2006-05-23

    The dynamics of the wetting and movement of a three-phase contact line confined between two superhydrophobic surfaces were studied using a mean-field free-energy lattice Boltzmann model. Principle features of superhydrophobic surfaces, such as trapped vapor/air between rough microstructures, high contact angles, reduced contact angle hysteresis, and low resistance to fluid flow, were all observed. Movement of the three-phase contact line over a well-patterned superhydrophobic surface displays a periodic stick-jump-slip behavior, while the dynamic contact angle changes accordingly from maximum to minimum. Two regimes were found for the flow velocity as a function of surface roughness and can be related directly to the balance between driving force and flow resistance. This work provides a better understanding of dynamic wetting and fluid flow behaviors over superhydrophobic surfaces and hence could be useful in related applications.

  9. Molecular dynamics study of contact mechanics: contact area and interfacial separation from small to full contact

    Science.gov (United States)

    Yang, Chunyan; Persson, Bo

    2008-03-01

    We report a molecular dynamics study of the contact between a rigid solid with a randomly rough surface and an elastic block with a flat surface. We study the contact area and the interfacial separation from small contact (low load) to full contact (high load). For small load the contact area varies linearly with the load and the interfacial separation depends logarithmically on the load [1-4]. For high load the contact area approaches to the nominal contact area (i.e., complete contact), and the interfacial separation approaches to zero. The present results may be very important for soft solids, e.g., rubber, or for very smooth surfaces, where complete contact can be reached at moderate high loads without plastic deformation of the solids. References: [1] C. Yang and B.N.J. Persson, arXiv:0710.0276, (to appear in Phys. Rev. Lett.) [2] B.N.J. Persson, Phys. Rev. Lett. 99, 125502 (2007) [3] L. Pei, S. Hyun, J.F. Molinari and M.O. Robbins, J. Mech. Phys. Sol. 53, 2385 (2005) [4] M. Benz, K.J. Rosenberg, E.J. Kramer and J.N. Israelachvili, J. Phy. Chem. B.110, 11884 (2006)

  10. On the junction physics of Schottky contact of (10, 10) MX{sub 2} (MoS{sub 2}, WS{sub 2}) nanotube and (10, 10) carbon nanotube (CNT): an atomistic study

    Energy Technology Data Exchange (ETDEWEB)

    Sengupta, Amretashis [Hanse-Wissenschaftskolleg (HWK), Delmenhorst (Germany); Universitaet Bremen, Bremen Center for Computational Materials Science (BCCMS), Bremen (Germany)

    2017-04-15

    Armchair nanotubes of MoS{sub 2} and WS{sub 2} offer a sizeable band gap, with the advantage of a one dimensional (1D) electronic material, but free from edge roughness and thermodynamic instability of nanoribbons. Use of such semiconducting MX{sub 2} (MoS{sub 2}, WS{sub 2}) armchair nanotubes (NTs) in conjunction with metallic carbon nanotubes (CNT) can be useful for nanoelectronics and photonics applications. In this work, atomistic simulations of MoS{sub 2} NT-CNT and WS{sub 2} NT-CNT junctions are carried out to study the physics of such junctions. With density functional theory (DFT) we study the carrier density distribution, effective potential, electron difference density, electron localization function, electrostatic difference potential and projected local density of states of such MX{sub 2} NT-CNT 1D junctions. Thereafter the conductance of such a junction under moderate bias is studied with non-equilibrium Green's function (NEGF) method. From the forward bias characteristics simulated from NEGF, we extract diode parameters of the junction. The electrostatic simulations from DFT show the formation of an inhomogeneous Schottky barrier with a tendency towards charge transfer from metal and chalcogen atoms towards the C atoms. For low bias conditions, the ideality factor was calculated to be 1.1322 for MoS{sub 2} NT-CNT junction and 1.2526 for the WS{sub 2} NT-CNT junction. The Schottky barrier heights displayed significant bias dependent modulation and are calculated to be in the range 0.697-0.664 eV for MoS{sub 2} NT-CNT and 0.669-0.610 eV for the WS{sub 2} NT-CNT, respectively. (orig.)

  11. Mechanical Contact Experiments and Simulations

    DEFF Research Database (Denmark)

    Nielsen, Chris Valentin; Martins, P; Zhang, W.;

    2011-01-01

    Mechanical contact is studied under dynamic development by means of a combined numerical and experimental investigation. The experiments are designed to allow dynamical development of non-planar contact areas with significant expansion in all three directions as the load is increased. Different...

  12. Contact modeling for robotics applications

    Energy Technology Data Exchange (ETDEWEB)

    Lafarge, R.A.; Lewis, C.

    1998-08-01

    At Sandia National Laboratories (SNL), the authors are developing the ability to accurately predict motions for arbitrary numbers of bodies of arbitrary shapes experiencing multiple applied forces and intermittent contacts. In particular, the authors are concerned with the simulation of systems such as part feeders or mobile robots operating in realistic environments. Preliminary investigation of commercial dynamics software packages led them to the conclusion that they could use commercial software to provide everything they needed except for the contact model. They found that ADAMS best fit their needs for a simulation package. To simulate intermittent contacts, they need collision detection software that can efficiently compute the distances between non-convex objects and return the associated witness features. They also require a computationally efficient contact model for rapid simulation of impact, sustained contact under load, and transition to and from contact conditions. This paper provides a technical review of a custom hierarchical distance computation engine developed at Sandia, called the C-Space Toolkit (CSTk). In addition, they describe an efficient contact model using a non-linear damping term developed by SNL and Ohio State. Both the CSTk and the non-linear damper have been incorporated in a simplified two-body testbed code, which is used to investigate how to correctly model the contact using these two utilities. They have incorporated this model into the ADAMS software using the callable function interface. An example that illustrates the capabilities of the 9.02 release of ADAMS with their extensions is provided.

  13. The importance of contact quality

    DEFF Research Database (Denmark)

    van Bakel, Marian; Gerritsen, Marinel; van Oudenhoven, Jan Pieter

    Establishing contact between expatriates and a local host has been found to reap benefits with regard to Interaction Adjustment, Host National Social Support, Open-mindedness, and Social Initiative. This longitudinal study examines the role of the quality of contact for these four aspects. Expatr...

  14. Drops, contact lines, and electrowetting

    NARCIS (Netherlands)

    Mannetje, 't D.J.C.M.

    2013-01-01

    In this work, we study the behaviour of drops and contact lines under the influence of electric fields, and how these can answer fundamental and industrial questions. Our focus is on studying the varying balance of the electric field, hysteresis forces and inertia as the speed of a contact line chan

  15. Body contact and body language

    DEFF Research Database (Denmark)

    Winther, Helle Dagmar

    2008-01-01

    Body contact and body language are unique and existential and, although culturally dependent and socially embodied, they are also universal communication forms. For small children all over the world, warm, close and nourishing body contact is fundamental to their embodied experi­ence of themselve...

  16. Fabricating customized hydrogel contact lens

    Science.gov (United States)

    Childs, Andre; Li, Hao; Lewittes, Daniella M.; Dong, Biqin; Liu, Wenzhong; Shu, Xiao; Sun, Cheng; Zhang, Hao F.

    2016-10-01

    Contact lenses are increasingly used in laboratories for in vivo animal retinal imaging and pre-clinical studies. The lens shapes often need modification to optimally fit corneas of individual test subjects. However, the choices from commercially available contact lenses are rather limited. Here, we report a flexible method to fabricate customized hydrogel contact lenses. We showed that the fabricated hydrogel is highly transparent, with refractive indices ranging from 1.42 to 1.45 in the spectra range from 400 nm to 800 nm. The Young’s modulus (1.47 MPa) and hydrophobicity (with a sessile drop contact angle of 40.5°) have also been characterized experimentally. Retinal imaging using optical coherence tomography in rats wearing our customized contact lenses has the quality comparable to the control case without the contact lens. Our method could significantly reduce the cost and the lead time for fabricating soft contact lenses with customized shapes, and benefit the laboratorial-used contact lenses in pre-clinical studies.

  17. Emotional Satisfaction of Customer Contacts

    NARCIS (Netherlands)

    Güngör, Hüseyin

    2007-01-01

    For marketing and customer services researchers and professionals who are interested in customer contacts, customer satisfaction and loyalty issues. Contact centers are playing a pivotal role in customer services of the 21st century. Nevertheless, despite their growing importance and presence, conta

  18. Emotional Satisfaction of Customer Contacts

    NARCIS (Netherlands)

    Güngör, Hüseyin

    2007-01-01

    For marketing and customer services researchers and professionals who are interested in customer contacts, customer satisfaction and loyalty issues. Contact centers are playing a pivotal role in customer services of the 21st century. Nevertheless, despite their growing importance and presence,

  19. Emotional Satisfaction of Customer Contacts

    NARCIS (Netherlands)

    Güngör, Hüseyin

    2007-01-01

    For marketing and customer services researchers and professionals who are interested in customer contacts, customer satisfaction and loyalty issues. Contact centers are playing a pivotal role in customer services of the 21st century. Nevertheless, despite their growing importance and presence, conta

  20. Aluminum break-point contacts

    NARCIS (Netherlands)

    Heinemann, Martina; Groot, R.A. de

    1997-01-01

    Ab initio molecular dynamics is used to study the contribution of a single Al atom to an aluminum breakpoint contact during the final stages of breaking and the initial stages of the formation of such a contact. A hysteresis effect is found in excellent agreement with experiment and the form of the

  1. Contact dermatitis in military personnel.

    Science.gov (United States)

    Dever, Tara T; Walters, Michelle; Jacob, Sharon

    2011-01-01

    Military personnel encounter the same allergens and irritants as their civilian counterparts and are just as likely to develop contact dermatitis from common exposures encountered in everyday life. In addition, they face some unique exposures that can be difficult to avoid owing to their occupational duties. Contact dermatitis can be detrimental to a military member's career if he or she is unable to perform core duties or avoid the inciting substances. An uncontrolled contact dermatitis can result in the member's being placed on limited-duty (ie, nondeployable) status, needing a job or rate change, or separation from military service. We present some common causes of contact dermatitis in military personnel worldwide and some novel sources of contact dermatitis in this population that may not be intuitive.

  2. Capteur Tridimensionnel Sans Contact

    Science.gov (United States)

    Magnant, D.

    1986-07-01

    Three-dimensionnal measurements on human body using a scanning laser beam. The active optical apparatus principle and the image data processing giving three dimensional informations of complex forms is presented. The output is given in terms of one or several files of real coordinates. The basic components of this system are : A light-sheet which is generated by a laser source and, the optical sensors (cameras) with corresponding hard-soft extractor; This 3D sensorial system is especially adapted to partial or total acquisitions of body coordinates. The main advantages are : - Vision and measurement capability of complete accessible contours without shadow areas. - The real time data acquisition and scanning of the object in a few seconds. - The access to distance measurements between significant points. - The presently obtained accuracy is better than 1/1000 in relatives units and lower than one MM absolute. - Physically stuck markers on body are not necessary. - The monochromaticity of the laser light source allows the use of a color filter over the detector (camera) for ambient light rejection. - The fully programmable capability for any use, allows the adaptation to a large variety of particular cases. - The hardware open system offers many options. - The hard-soft tool is designed for auto-calibration operation. - The system offers easy connection to a host computer or a production robot.

  3. Current Health-Related Quality of Life in Former National Collegiate Athletic Association Division I Collision Athletes Compared With Contact and Limited-Contact Athletes.

    Science.gov (United States)

    Simon, Janet E; Docherty, Carrie L

    2016-03-01

    Previous researchers have shown that current health-related quality of life (HRQoL) is lower in former National Collegiate Athletic Association Division I athletes than in nonathletes. However, evidence supports the idea that individuals in collision sports (football) may suffer more serious injuries that may affect them later in life. To measure HRQoL in former Division I collision, contact, and limited-contact athletes. Cross-sectional study. Research laboratory. A total of 374 former Division I athletes between the ages of 40 and 65 years were separated into collision, contact, and limited-contact groups. All individuals completed the Short Form 36 version 2 via a computer. The dependent variables were the physical component and mental component summary scores and the physical functioning, physical role functioning, bodily pain, general health, vitality, social role functioning, emotional role functioning, and mental health scales. An initial multivariate analysis of covariance included data from the 2 domains: physical component and mental component summary scores. The second multivariate analysis of covariance included data from the 8 dimensions: physical function, role physical, bodily pain scale, general health, mental health, role emotional, social function, and vitality scales. The α level was set at P contact and limited-contact athletes for the summary scores (F2,370 = 90.09, P contact athletes for the bodily pain and role physical scales, with mean differences of 12.91 and 11.80 points, respectively. Competing at the Division I level can be strenuous on an athlete's physical, mental, and social dimensions, which can affect the athlete later in life. Based on these data, collision athletes may sacrifice their future HRQoL compared with contact and limited-contact athletes.

  4. Multifocal contact lens myopia control.

    Science.gov (United States)

    Walline, Jeffrey J; Greiner, Katie L; McVey, M Elizabeth; Jones-Jordan, Lisa A

    2013-11-01

    Previous studies on soft multifocal contact lens myopia control published in the peer-reviewed literature reported findings of noncommercial contact lenses worn for 1 year or less. This study sought to determine the progression of myopia and axial elongation of children fitted with commercially available distance center soft multifocal contact lenses for 2 years. Eight- to eleven-year-old children with -1.00 D to -6.00 D spherical component and less than 1.00 D astigmatism were fitted with soft multifocal contact lenses with a +2.00 D add (Proclear Multifocal "D"; CooperVision, Fairport, NY). They were age- and gender-matched to participants from a previous study who were fitted with single-vision contact lenses (1 Day Acuvue; Vistakon, Jacksonville, FL). A-scan ultrasound and cycloplegic autorefraction were performed at baseline, after 1 year, and after 2 years. Multilevel modeling was used to compare the rate of change of myopia and axial length between single-vision and soft multifocal contact lens wearers. Forty participants were fitted with soft multifocal contact lenses, and 13 did not contribute complete data (5 contributed 1 year of data). The adjusted mean ± standard error spherical equivalent progression of myopia at 2 years was -1.03 ± 0.06 D for the single-vision contact lens wearers and -0.51 ± 0.06 for the soft multifocal contact lens wearers (p < 0.0001). The adjusted mean axial elongation was 0.41 ± 0.03 and 0.29 ± 0.03 for the single-vision and soft multifocal contact lens wearers, respectively (p < 0.0016). Soft multifocal contact lens wear resulted in a 50% reduction in the progression of myopia and a 29% reduction in axial elongation during the 2-year treatment period compared to a historical control group. Results from this and other investigations indicate a need for a long-term randomized clinical trial to investigate the potential for soft multifocal contact lens myopia control.

  5. Contact allergy to epoxy resin

    DEFF Research Database (Denmark)

    Bangsgaard, Nannie; Thyssen, Jacob Pontoppidan; Menné, Torkil

    2012-01-01

    . Objectives. To evaluate the prevalence of contact allergy to epoxy resin monomer (diglycidyl ether of bisphenol A; MW 340) among patients with suspected contact dermatitis and relate this to occupation and work-related consequences. Patients/methods. The dataset comprised 20 808 consecutive dermatitis...... in an educational programme. Conclusion. The 1% prevalence of epoxy resin contact allergy is equivalent to reports from other countries. The high occurrence of epoxy resin exposure at work, and the limited use of protective measures, indicate that reinforcement of the law is required....

  6. All-graphene edge contacts

    DEFF Research Database (Denmark)

    Jacobsen, Kåre Wedel; Falkenberg, Jesper Toft; Papior, Nick Rübner;

    2016-01-01

    Using ab-initio methods we investigate the possibility of three-terminalgraphene "T-junction" devices and show that these all-graphene edge contactsare energetically feasible when the 1D interface itself is free from foreignatoms. We examine the energetics of various junction structures...... to be in therange of 1-10 kΩμm which is comparable to the best contact resistance reportedfor edge-contacted graphene-metal contacts. We conclude that conductingall-carbon T-junctions should be feasible....

  7. Physical urticarias and cholinergic urticaria.

    Science.gov (United States)

    Abajian, Marina; Schoepke, Nicole; Altrichter, Sabine; Zuberbier, Torsten; Zuberbier, H C Torsten; Maurer, Marcus

    2014-02-01

    Physical urticarias are a unique subgroup of chronic urticaria in which urticarial responses can be reproducibly induced by different specific physical stimuli acting on the skin. These conditions include urticaria factitia/symptomatic dermographism, delayed pressure urticaria, cold contact urticaria, heat contact urticaria, solar urticaria, and vibratory urticaria/angioedema. Physical urticarias and cholinergic urticarias are diagnosed based on the patients' history and provocation tests including trigger threshold testing where possible. Treatment is mainly symptomatic. Many patients benefit from avoiding eliciting triggers, and desensitization to these triggers can be helpful in some physical urticarias and in cholinergic urticaria.

  8. Method and apparatus for high-efficiency direct contact condensation

    Science.gov (United States)

    Bharathan, Desikan; Parent, Yves; Hassani, A. Vahab

    1999-01-01

    A direct contact condenser having a downward vapor flow chamber and an upward vapor flow chamber, wherein each of the vapor flow chambers includes a plurality of cooling liquid supplying pipes and a vapor-liquid contact medium disposed thereunder to facilitate contact and direct heat exchange between the vapor and cooling liquid. The contact medium includes a plurality of sheets arranged to form vertical interleaved channels or passageways for the vapor and cooling liquid streams. The upward vapor flow chamber also includes a second set of cooling liquid supplying pipes disposed beneath the vapor-liquid contact medium which operate intermittently in response to a pressure differential within the upward vapor flow chamber. The condenser further includes separate wells for collecting condensate and cooling liquid from each of the vapor flow chambers. In alternate embodiments, the condenser includes a cross-current flow chamber and an upward flow chamber, a plurality of upward flow chambers, or a single upward flow chamber. The method of use of the direct contact condenser of this invention includes passing a vapor stream sequentially through the downward and upward vapor flow chambers, where the vapor is condensed as a result of heat exchange with the cooling liquid in the contact medium. The concentration of noncondensable gases in the resulting condensate-liquid mixtures can be minimized by controlling the partial pressure of the vapor, which depends in part upon the geometry of the vapor-liquid contact medium. In another aspect of this invention, the physical and chemical performance of a direct contact condenser can be predicted based on the vapor and coolant compositions, the condensation conditions. and the geometric properties of the contact medium.

  9. Investigation of the Contact Resistance between Ti/TiN and Ru in Metal-1/Plate Contacts of Ruthenium Insulator Silicon Capacitor

    Science.gov (United States)

    Yun, Ju Young; Kim, Byung Hee; Seo, Jung Hun; Lee, Jong Myeong; Kang, Sang Bom; Choi, Gil Heyun; Chung, U In; Moon, Joo Tae

    2003-04-01

    The contact resistance between Ti/TiN and a Ru electrode in metal-1/plate contacts of ruthenium insulator silicon (RIS) capacitor is investigated. When physical vapor deposition (PVD) Ti/TiN was used as a barrier metal for the metal contact process, a high contact resistance of more than 5000 Ω/contact was obtained due to the oxidation of Ti by the residual oxygen in Ru electrode. On the other hand, with a plasma enhanced chemical vapor deposition (PECVD) Ti/CVD TiN barrier metal, oxidation of Ti was not observed and subsequently a low contact resistance of 15 Ω/contact was obtained. The absence of Ti oxidation with PECVD Ti/CVD TiN can be explained by the reduction of oxygen in the Ru electrode due to the H2 plasma environment in the PECVD-Ti process.

  10. Medical management of contact dermatitis.

    Science.gov (United States)

    Alexandroff, A B; Johnston, G A

    2009-10-01

    Allergic and irritant contact dermatitis are important dermatological problems. Although the frequencies of positive reactions to a number of allergens have decreased during last 30 years because of better avoidance (and at least in part due to improved legislation), contact allergy to other agents is rising. The medical treatment starts from a correct identification of triggers of contact dermatitis which could allow patients to reduce or avoid exposure to these agents in future. A good clinical history, examination and immunological tests including patch testing are of crucial importance at this stage. Further management includes emollients, topical and oral corticosteroids, topical calcineurin inhibitors, azathioprine and ciclosporin. Methotrexate and alitretinoin are recent additions to the armamentarium of dermatologists who manage contact dermatitis.

  11. Scalable algorithms for contact problems

    CERN Document Server

    Dostál, Zdeněk; Sadowská, Marie; Vondrák, Vít

    2016-01-01

    This book presents a comprehensive and self-contained treatment of the authors’ newly developed scalable algorithms for the solutions of multibody contact problems of linear elasticity. The brand new feature of these algorithms is theoretically supported numerical scalability and parallel scalability demonstrated on problems discretized by billions of degrees of freedom. The theory supports solving multibody frictionless contact problems, contact problems with possibly orthotropic Tresca’s friction, and transient contact problems. It covers BEM discretization, jumping coefficients, floating bodies, mortar non-penetration conditions, etc. The exposition is divided into four parts, the first of which reviews appropriate facets of linear algebra, optimization, and analysis. The most important algorithms and optimality results are presented in the third part of the volume. The presentation is complete, including continuous formulation, discretization, decomposition, optimality results, and numerical experimen...

  12. Occupational contact dermatitis in hairdressers

    DEFF Research Database (Denmark)

    Schwensen, Jakob F; Johansen, Jeanne Duus; Veien, Niels K

    2013-01-01

    BACKGROUND: Occupational contact dermatitis among hairdressers is frequent, owing to daily exposure to irritants and allergens. OBJECTIVES: To identify sensitization to the most common allergens associated with the occupation of hairdressing. METHODS: Patch test results of 399 hairdressers and 19...

  13. Dendritic cells and contact dermatitis.

    Science.gov (United States)

    Sasaki, Yoshinori; Aiba, Setsuya

    2007-10-01

    Contact dermatitis is a biological response to simple chemicals in the skin. Although it is well known that allergic contact dermatitis is mediated by the immune system, it is still uncertain whether it is a kind of protective response or it is simply an unnecessary response. We have demonstrated the following: (1) haptens activate Langerhans cells in the initiation phase of murine allergic contact dermatitis in vivo, (2) haptens activate human monocyte-derived dendritic cells in vitro, (3) the activation of dendritic cells by haptens is primarily mediated by the activation of p38 mitogen-activated protein kinase (MAPK), and (4) the activation of p38 MAPK is mediated by stimulation related to an imbalance of intracellular redox. Based on these observations, we will discuss the biological significance of contact dermatitis. In addition, we will review some up-to-date findings on Langerhans cell biology.

  14. Contact vitiligo: etiology and treatment

    Directory of Open Access Journals (Sweden)

    Singh P

    2003-01-01

    Full Text Available Fifty patients of contact vitiligo were studied. EtiologicaI agents of contact vitiligo were identified by clinical history, distribution of lesions and patch testing with suspected material. All patients were advised to avoid the suspected agent and treated with PUVASOL and topical steroid. Out of 50 patients (Male 8%, Female 92% age 14-60 years., etiological agent of contact vitiligo was found to be sticking bindi alone in 24 (48%, while bindi along with other etiological agents were found to be purse, foot wear, plastic watch strap, lipstick and tooth paste in 14 ( 28% cases. 14 (28% patients also had disseminated lesions of vitiligo along with contact vitiligo. Positive reaction with patch testing was observed in 18 (36% while depigmentation was seen in 4 ( 8% cases. We observed that response of treatment was better in patients with shorter duration of disease while poor response was seen in patients with longer duration of disease.

  15. The geometry of surfaces contact

    Directory of Open Access Journals (Sweden)

    Siegl J.

    2007-11-01

    Full Text Available This contribution deals with a geometrical exact description of contact between two given surfaces which are defined by the vector functions. These surfaces are substituted at a contact point by approximate surfaces of the second order in accordance with the Taylor series and consequently there is derived a differential surface of these second order surfaces. Knowledge of principal normal curvatures, their directions and the tensor (Dupin indicatrix of this differential surface are necessary for description of contact of these surfaces. For description of surface geometry the first and the second surface fundamental tensor and a further methods of the differential geometry are used. A geometrical visualisation of obtained results of this analysis is made. Method and results of this study will be applied to contact analysis of tooth screw surfaces of screw machines.

  16. Nordic project food contact materials

    DEFF Research Database (Denmark)

    Li, Ågot; Tesdal Håland, Julie; Petersen, Jens Højslev

    countries have had a limited focus on the FCM area with the exception of Denmark and Finland. The aim of the project was therefore to control establishments producing, importing or using plastic food contact materials as well as to increase the knowledge of the inspectors performing these controls......Denmark, Finland, Faroe Islands, Iceland, Norway and Sweden have in 2013––2015 conducted a Nordic project on food contact materials. Food contact materials are used in all stages of food production and can be a general source of contamination. The food safety authorities in most of the Nordic....... The focus of the inspections was to control the declaration of compliance (DoC) for plastic food contact materials. The requirement for a Doc is mandatory in order to ensure that the FCM complies with the legislation. In addition some products were analyzed for phthalates....

  17. Transition metal contacts to graphene

    Energy Technology Data Exchange (ETDEWEB)

    Politou, Maria, E-mail: Maria.Politou@imec.be; De Gendt, Stefan; Heyns, Marc [KU Leuven, 3001 Leuven (Belgium); imec, Kapeldreef 75, 3001 Leuven (Belgium); Asselberghs, Inge; Radu, Iuliana; Conard, Thierry; Richard, Olivier; Martens, Koen; Huyghebaert, Cedric; Tokei, Zsolt [imec, Kapeldreef 75, 3001 Leuven (Belgium); Lee, Chang Seung [SAIT, Samsung Electronics Co., Suwon 443-803 (Korea, Republic of); Sayan, Safak [imec, Kapeldreef 75, 3001 Leuven (Belgium); Intel Corporation, 2200 Mission College Blvd, Santa Clara, California 95054 (United States)

    2015-10-12

    Achieving low resistance contacts to graphene is a common concern for graphene device performance and hybrid graphene/metal interconnects. In this work, we have used the circular Transfer Length Method (cTLM) to electrically characterize Ag, Au, Ni, Ti, and Pd as contact metals to graphene. The consistency of the obtained results was verified with the characterization of up to 72 cTLM structures per metal. Within our study, the noble metals Au, Ag and Pd, which form a weaker bond with graphene, are shown to result in lower contact resistance (Rc) values compared to the more reactive Ni and Ti. X-ray Photo Electron Spectroscopy and Transmission Electron Microscopy characterization for the latter have shown the formation of Ti and Ni carbides. Graphene/Pd contacts show a distinct intermediate behavior. The weak carbide formation signature and the low Rc values measured agree with theoretical predictions of an intermediate state of weak chemisorption of Pd on graphene.

  18. Embodied Archives as Contact Zones

    Directory of Open Access Journals (Sweden)

    Judit Vidiella

    2015-02-01

    Full Text Available This article proposes a reflection about affective politics from locating some theoretical and conceptual genealogies like «emotion», «affection», «zones of contact»…, that understand them as action and force fields. These contributions allow us to rethink the relation of affects with politics and strategies of archive linked to performance, and understood as zones of friction, collision, circulation and contact: performative writing, repertoire, memes…

  19. Contact process in a wedge

    CERN Document Server

    Cox, J Theodore; Schinazi, Rinaldo B

    2009-01-01

    We prove that the supercritical one-dimensional contact process survives in certain wedge-like space-time regions, and that when it survives it couples with the unrestricted contact process started from its upper invariant measure. As an application we show that a type of weak coexistence is possible in the nearest-neighbor ``grass-bushes-trees'' successional model introduced in Durrett and Swindle (1991).

  20. Contact dermatitis to botanical extracts.

    Science.gov (United States)

    Kiken, David A; Cohen, David E

    2002-09-01

    A review of the literature of reported cases of contact dermatitis to a variety of natural herbal extracts is Presented. Natural extracts are commonly used ingredients in many cosmetic preparations and homeopathic remedies. Although the term natural botanical extracts inherently purports to have beneficial and benign properties, these extracts can cause adverse reactions in individuals. As such, dermatologists should be cognizant of these agents as possible sources of allergenicity in patients presenting with contact dermatitis.

  1. Mixing patterns and the spread of close-contact infectious diseases

    Directory of Open Access Journals (Sweden)

    Wallinga J

    2006-08-01

    Full Text Available Abstract Surprisingly little is known regarding the human mixing patterns relevant to the spread of close-contact infections, such as measles, influenza and meningococcal disease. This study aims to estimate the number of partnerships that individuals make, their stability and the degree to which mixing is assortative with respect to age. We defined four levels of putative at-risk events from casual (physical contact without conversation to intimate (contact of a sexual nature, and asked university student volunteers to record details on those they contacted at these levels on three separate days. We found that intimate contacts are stable over short time periods whereas there was no evidence of repeat casual contacts with the same individuals. The contacts were increasingly assortative as intimacy increased. Such information will aid the development and parameterisation of models of close contact diseases, and may have direct use in outbreak investigations.

  2. Probabilistic Model to Treat Flexibility in Molecular Contacts

    CERN Document Server

    Hakulinen, Riku

    2016-01-01

    Evaluating accessible conformational space is computationally expensive and thermal motions are partly neglected in computer models of molecular interactions. This produces error into the estimates of binding strength. We introduce a method for modelling interactions so that structural flexibility is inherently taken into account. It has a statistical model for 3D properties of 'nonlocal' contacts and a physics based description of 'local' interactions, based on mechanical torque. The form of the torque barrier is derived using a representation of the local electronic structure, which is presumed to improve transferability, compared to traditional force fields. The nonlocal contacts are more distant than 1-4 interactions and Target-atoms are represented by 3D probability densities. Probability mass quantifies strength of contact and is calculated as an overlap integral. Repulsion is described by negative probability density, allowing probability mass to be used as the descriptor of contact preference. As a re...

  3. Siloxanes in silicone products intended for food contact

    DEFF Research Database (Denmark)

    Cederberg, Tommy Licht; Jensen, Lisbeth Krüger

    Silicone is used in food contact materials due to its excellent physical and chemical properties. It is thermostable and flexible and is used in bakeware and kitchen utensils. Silicone is also used to coat paper to make it water and fat resistant. There is no specific regulation in EU which covers...... silicone as food contact materials, but in Regulation 1935/2004 on materials intended to come into contact with food it is stated that materials should be manufactured so it do not transfer their constituents to food in quantities which could endanger human health. Silicone may contain residual siloxane...... oligomers which might migrate to the food when the product is being used. DTU has proposed two action limits for low molecular weight siloxanes in food contact materials. For the sum of cyclic siloxanes D3 to D8 the limits are 12 mg/kg food for adults and 2 mg/kg food for children. For the sum of cyclic...

  4. "Meet and Greet and Then Treat" is No Fun: Is It Time To Reinvent No-Touch Greetings For Contact Precautions? A Personal Perspective

    Directory of Open Access Journals (Sweden)

    Deepak Gupta

    2015-03-01

    Full Text Available Cleanliness in general and in healthcare settings in particular as advocated by Centers for Disease Control and Prevention (CDC with hand-hygiene standards-guidelines bring forth the importance of culprit hands and how to take care of them. There is an unexplored (and potentially overlooked arena/avenue wherein neither you can strictly/religiously adhere to hand-hygiene (often given amiss by our natural prude psyche nor you can avoid thinking about it despite human being a social animal (how to else-greet without having to self-treat. Not only should oneself not waste time in prolonged civilities or greetings as advocated but also one should not allow those greetings lingering on to them through the exchanged visible or invisible fluids therein. What does this all may mean is that for example, hand-shaking may be easily replaced with hand-waving so that your mind does not immediately race to hand-washing; and hugging may be easily replaced with bowing so that you are not bowing to the contracted illnesses due to the contacted bodies. Finally what to say about kissing that may be avoided altogether when greeting strangers or may be limited for only those people whom you love so much that you are ready to get sick with them. In summary, general population with societal assent can re-invent No-Touch Greetings for contact precautions in regular livelihoods because meeting and greeting and then rushing for treating self is never fun.

  5. Thermal fluctuations of an interface near a contact line

    Science.gov (United States)

    Belardinelli, D.; Sbragaglia, M.; Gross, M.; Andreotti, B.

    2016-11-01

    The effect of thermal fluctuations near a contact line of a liquid interface partially wetting an impenetrable substrate is studied analytically and numerically. Promoting both the interface profile and the contact line position to random variables, we explore the equilibrium properties of the corresponding fluctuating contact line problem based on an interfacial Hamiltonian involving a "contact" binding potential. To facilitate an analytical treatment, we consider the case of a one-dimensional interface. The effective boundary condition at the contact line is determined by a dimensionless parameter that encodes the relative importance of thermal energy and substrate energy at the microscopic scale. We find that this parameter controls the transition from a partial wetting to a pseudopartial wetting state, the latter being characterized by a thin prewetting film of fixed thickness. In the partial wetting regime, instead, the profile typically approaches the substrate via an exponentially thinning prewetting film. We show that, independently of the physics at the microscopic scale, Young's angle is recovered sufficiently far from the substrate. The fluctuations of the interface and of the contact line give rise to an effective disjoining pressure, exponentially decreasing with height. Fluctuations therefore provide a regularization of the singular contact forces occurring in the corresponding deterministic problem.

  6. Thermally activated depinning motion of contact lines in pseudopartial wetting.

    Science.gov (United States)

    Du, Lingguo; Bodiguel, Hugues; Colin, Annie

    2014-07-01

    We investigate pressure-driven motion of liquid-liquid menisci in circular tubes, for systems in pseudopartial wetting conditions. The originality of this type of wetting lies in the coexistence of a macroscopic contact angle with a wetting liquid film covering the solid surface. Focusing on small capillary numbers, we report observations of an apparent contact angle hysteresis at first sight similar to the standard partial wetting case. However, this apparent hysteresis exhibits original features. We observe very long transient regimes before steady state, up to several hundreds of seconds. Furthermore, in steady state, the velocities are nonzero, meaning that the contact line is not strongly pinned to the surface defects, but are very small. The velocity of the contact line tends to vanish near the equilibrium contact angle. These observations are consistent with the thermally activated depinning theory that has been proposed to describe partial wetting systems on disordered substrates and suggest that a single physical mechanism controls both the hysteresis (or the pinning) and the motion of the contact line. The proposed analysis leads to the conclusion that the depinning activated energy is lower with pseudopartial wetting systems than with partial wetting ones, allowing the direct observation of the thermally activated motion of the contact line.

  7. Measuring The Contact Resistances Of Photovoltaic Cells

    Science.gov (United States)

    Burger, D. R.

    1985-01-01

    Simple method devised to measure contact resistances of photovoltaic solar cells. Method uses readily available equipment and applicable at any time during life of cell. Enables evaluation of cell contact resistance, contact-end resistance, contact resistivity, sheet resistivity, and sheet resistivity under contact.

  8. RF Sputtering of Gold Contacts On Niobium

    Science.gov (United States)

    Barr, D. W.

    1983-01-01

    Reliable gold contacts are deposited on niobium by combination of RF sputtering and photolithography. Process results in structures having gold only where desired for electrical contact. Contacts are stable under repeated cycling from room temperature to 4.2 K and show room-temperature contact resistance as much as 40 percent below indium contacts made by thermalcompression bonding.

  9. Solar cell with back side contacts

    Energy Technology Data Exchange (ETDEWEB)

    Nielson, Gregory N; Okandan, Murat; Cruz-Campa, Jose Luis; Resnick, Paul J; Wanlass, Mark Woodbury; Clews, Peggy J

    2013-12-24

    A III-V solar cell is described herein that includes all back side contacts. Additionally, the positive and negative electrical contacts contact compoud semiconductor layers of the solar cell other than the absorbing layer of the solar cell. That is, the positive and negative electrical contacts contact passivating layers of the solar cell.

  10. Solar cell with back side contacts

    Science.gov (United States)

    Nielson, Gregory N; Okandan, Murat; Cruz-Campa, Jose Luis; Resnick, Paul J; Wanlass, Mark Woodbury; Clews, Peggy J

    2013-12-24

    A III-V solar cell is described herein that includes all back side contacts. Additionally, the positive and negative electrical contacts contact compoud semiconductor layers of the solar cell other than the absorbing layer of the solar cell. That is, the positive and negative electrical contacts contact passivating layers of the solar cell.

  11. Nonlinear dynamics of incommensurately contacting surfaces : a model study

    NARCIS (Netherlands)

    Consoli, Luca

    2002-01-01

    This PhD thesis is about the nonlinear dynamics of contacting surfaces. More specifically, it deals with the problem of modelling at the microscopic level some of the contributions that lead to the macroscopic effect of dry sliding friction. In chapter 1, we try to give an overview of the physical q

  12. Ferromagnetic tunnel contacts to graphene: Contact resistance and spin signal

    Energy Technology Data Exchange (ETDEWEB)

    Cubukcu, M.; Laczkowski, P.; Vergnaud, C.; Marty, A.; Attané, J.-P.; Notin, L.; Vila, L., E-mail: laurent.vila@cea.fr; Jamet, M. [University Grenoble Alpes, CEA, INAC-SP2M, F-38054 Grenoble (France); Martin, M.-B.; Seneor, P.; Anane, A.; Deranlot, C.; Fert, A. [Unité Mixte de Physique CNRS-Thales, F-91767 Palaiseau (France); Auffret, S. [University Grenoble Alpes, CNRS, CEA, INAC-SPINTEC, Grenoble F-38054 (France); Ducruet, C. [Crocus Technology, 4 place Robert Schuman, 38000 Grenoble (France)

    2015-02-28

    We report spin transport in CVD graphene-based lateral spin valves using different magnetic contacts. We compared the spin signal amplitude measured on devices where the cobalt layer is directly in contact with the graphene to the one obtained using tunnel contacts. Although a sizeable spin signal (up to ∼2 Ω) is obtained with direct contacts, the signal is strongly enhanced (∼400 Ω) by inserting a tunnel barrier. In addition, we studied the resistance-area product (R.A) of a variety of contacts on CVD graphene. In particular, we compared the R.A products of alumina and magnesium oxide tunnel barriers grown by sputtering deposition of aluminum or magnesium and subsequent natural oxidation under pure oxygen atmosphere or by plasma. When using an alumina tunnel barrier on CVD graphene, the R.A product is high and exhibits a large dispersion. This dispersion can be highly reduced by using a magnesium oxide tunnel barrier, as for the R.A value. This study gives insight in the material quest for reproducible and efficient spin injection in CVD graphene.

  13. The Josephson effect in atomic contacts; Effect Josephson dans les contacts atomiques

    Energy Technology Data Exchange (ETDEWEB)

    Chauvin, M

    2005-11-15

    The Josephson effect appears when a weak-link establishes phase coherence between two superconductors. A unifying theory of this effect emerged in the 90's within the framework of mesoscopic physics. Based on two cornerstone concepts, conduction channels and Andreev reflection, it predicts the current-phase relation for the most basic weak-link: a single conduction channel of arbitrary transmission. This thesis illustrates this mesoscopic point of view with experiments on superconducting atomic size contacts. In particular, we have focused on the supercurrent peak around zero voltage, put into evidence the ac Josephson currents in a contact under constant bias voltage (Shapiro resonances and photon assisted multiple Andreev reflections), and performed direct measurements of the current-phase relation. (author)

  14. Social contacts and mixing patterns relevant to the spread of infectious diseases.

    Directory of Open Access Journals (Sweden)

    Joël Mossong

    2008-03-01

    Full Text Available BACKGROUND: Mathematical modelling of infectious diseases transmitted by the respiratory or close-contact route (e.g., pandemic influenza is increasingly being used to determine the impact of possible interventions. Although mixing patterns are known to be crucial determinants for model outcome, researchers often rely on a priori contact assumptions with little or no empirical basis. We conducted a population-based prospective survey of mixing patterns in eight European countries using a common paper-diary methodology. METHODS AND FINDINGS: 7,290 participants recorded characteristics of 97,904 contacts with different individuals during one day, including age, sex, location, duration, frequency, and occurrence of physical contact. We found that mixing patterns and contact characteristics were remarkably similar across different European countries. Contact patterns were highly assortative with age: schoolchildren and young adults in particular tended to mix with people of the same age. Contacts lasting at least one hour or occurring on a daily basis mostly involved physical contact, while short duration and infrequent contacts tended to be nonphysical. Contacts at home, school, or leisure were more likely to be physical than contacts at the workplace or while travelling. Preliminary modelling indicates that 5- to 19-year-olds are expected to suffer the highest incidence during the initial epidemic phase of an emerging infection transmitted through social contacts measured here when the population is completely susceptible. CONCLUSIONS: To our knowledge, our study provides the first large-scale quantitative approach to contact patterns relevant for infections transmitted by the respiratory or close-contact route, and the results should lead to improved parameterisation of mathematical models used to design control strategies.

  15. THE INVESTIGATION OF CONTACT RESISTANCE CHARACTERISTICS ON ELECTRICAL CONTACTS USED IN COAL MINES

    Institute of Scientific and Technical Information of China (English)

    郭凤仪; 王其平; 孙鹤旭; 乔和; 张静

    1997-01-01

    Based on the electrical contact and arc theory, the experiments on contact resistance characteristics of electrical contacts are carried out, by analyzing the experimental results, some conclusions of contact resistance characteristics have been obtained in this paper.

  16. Antibacterial surface design - Contact kill

    Science.gov (United States)

    Kaur, Rajbir; Liu, Song

    2016-08-01

    Designing antibacterial surfaces has become extremely important to minimize Healthcare Associated Infections which are a major cause of mortality worldwide. A previous biocide-releasing approach is based on leaching of encapsulated biocides such as silver and triclosan which exerts negative impacts on the environment and potentially contributes to the development of bacterial resistance. This drawback of leachable compounds led to the shift of interest towards a more sustainable and environmentally friendly approach: contact-killing surfaces. Biocides that can be bound onto surfaces to give the substrates contact-active antibacterial activity include quaternary ammonium compounds (QACs), quaternary phosphoniums (QPs), carbon nanotubes, antibacterial peptides, and N-chloramines. Among the above, QACs and N-chloramines are the most researched contact-active biocides. We review the engineering of contact-active surfaces using QACs or N-chloramines, the modes of actions as well as the test methods. The charge-density threshold of cationic surfaces for desired antibacterial efficacy and attempts to combine various biocides for the generation of new contact-active surfaces are discussed in detail. Surface positive charge density is identified as a key parameter to define antibacterial efficacy. We expect that this research field will continue to attract more research interest in view of the potential impact of self-disinfective surfaces on healthcare-associated infections, food safety and corrosion/fouling resistance required on industrial surfaces such as oil pipes and ship hulls.

  17. Improving electric contacts by ion implantation

    Energy Technology Data Exchange (ETDEWEB)

    Xu Shiru; Zhang Ying; Zheng Tiampi

    1989-01-01

    This article studies the improvement of electric contacts by ion implantation. 1 x 10/sup 17/ cm/sup -2/ of N/sup +/ and N/sub 2//sup +/ was implanted into two kinds of electric contacts, then a make-and-break test was made with the low voltage electrical apparatus. The weight loss of the contacts, temperature rise, contact resistance and transfer of material between the two contacts were measured. The contacts implanted by ions have improved electrical erosion properties.

  18. A model of mechanical contacts in hearing aids for uncertainty analysis

    DEFF Research Database (Denmark)

    Creixell Mediante, Ester; Brunskog, Jonas; Jensen, Jakob Søndergaard;

    2015-01-01

    Modelling the contact between assembled parts is a key point in the design of complex structures. Uncertainties at the joint parameters arise as a result of randomness in physical properties such as contact surface, load distribution or geometric details. This is a challenge of concern in the hea......Modelling the contact between assembled parts is a key point in the design of complex structures. Uncertainties at the joint parameters arise as a result of randomness in physical properties such as contact surface, load distribution or geometric details. This is a challenge of concern...... in the hearing aid field, where the small lightweight structures present vibration modes at frequencies within the hearing range. To approach this issue, a model of contacts based on lumped elements is suggested. The joint parameters are the stiffness of a series of spring elements placed along the contact...

  19. Transport and performance of a zero-Schottky barrier and doped contacts graphene nanoribbon transistors

    Science.gov (United States)

    Alam, Khairul

    2009-01-01

    The transport physics and performance of a top gate graphene nanoribbon (GNR) on an insulator transistor are studied for both the MOSFET like doped source-drain and the zero-Schottky barrier source-drain contacts. A voltage controlled tunnel barrier is the device transport physics. The doped source-drain contact device has a higher gate capacitance, higher transconductance, higher on/off current ratio and higher on-state current. The higher on-state current results in a lower switching delay of 17 fs, and the higher transconductance results in a higher intrinsic cut-off frequency of 27 THz in the doped source-drain contact device. The gate voltage, beyond the source-channel flat band condition, modulates both the tunnel and the thermal barrier in the doped source-drain contact devices and the tunnel barrier only in the Schottky contact devices. This limits the on-state current of Schottky contact devices.

  20. Contact dermatitis in a woodworker.

    Science.gov (United States)

    Correale, Christine E; Marks, James G

    2002-03-01

    Woods are capable of causing allergic or irritant contact dermatitis which typically occurs on the exposed areas of the arms, face, and neck. The allergens found in woods include quinones, stilbenes, phenols, and terpenes. We report an 84-year-old woodworker who developed allergic contact dermatitis from Bolivian rosewood and Cocobolo wood. The patient was patch-tested using the North American Contact Dermatitis Group Standard Tray; 2,6 dimethoxyl 1,4 benzoquinone; and wood that he had been exposed to on a regular basis. Positive patch test reactions occurred to methyldibromo glutaronitrile phenoxyethanol, sodium gold thiosulfate, Bolivian rosewood, and Cocobolo wood. Allergens found in Bolivian rosewood and Cocobolo wood caused this patient's chronic dermatitis, which cleared when he avoided these woods. Copyright 2002, Elsevier Science (USA). All rights reserved.

  1. [Occupational contact dermatitis in hairdressers].

    Science.gov (United States)

    Kieć-Swierczyńska, Marta; Krycisz, Beata; Chomiczewska, Dorota

    2009-01-01

    Numerous data from the medical literature show that working as a hairdresser is associated with the highest risk of occupational contact dermatitis. In Europe, hairdressers rank first of all occupation groups with the highest prevalence of occupational dermatitis. It is estimated that 10-20% and even 50% of hairdressers are affected with skin disorders. Skin problems occur soon after commencing hairdressing, in the first 2 years of work, sometimes during vocational training. The most common factors contributing to skin damage include water, shampoos, detergents, conditioners, hair dyes, bleaches, permanent wave solutions and components of gloves. Water and wet work are prime skin irritants - causal factors of irritant contact dermatitis while p-phenylenediamine, glyceryl monothioglycolate, ammonium persulfate and also fragrances, preservatives, disinfectants and metals are the most important allergens, which induce allergic contact dermatitis.

  2. Methylisothiazolinone contact allergy - A review

    DEFF Research Database (Denmark)

    Lundov, M D; Krongaard, Teddy; L Menné, T

    2011-01-01

    In the early 2000s the preservative methylisothiazolinone (MI) was released as an individual preservative for industrial products and in 2005 permitted for use in cosmetic products. Up till then MI had only been used in combination with methylcholoroisthiazolinone (MCI). MCI/MI is one of the most...... frequent causes of preservative contact allergy and early studies showed that both MI and MCI are sensitizers. The prevalence of MI contact allergy is already around 1·5% and sources of exposure are associated with occupation, cosmetic products or household products. Use of MI in industrial products...... is not restricted and cases of occupational contact allergy to MI e.g. in painters are reported. The frequency of use of MI in cosmetics is low, around 1%, while up to 16·5% of household products were preserved with MI. We found 19 (1·5%) out of 1272 cosmetic products labelled with MI, primarily rinse-off products...

  3. Methylisothiazolinone contact allergy: a review

    DEFF Research Database (Denmark)

    Lundov, M D; Krongaard, T; Menné, T L

    2011-01-01

    In the early 2000s the preservative methylisothiazolinone (MI) was released as an individual preservative for industrial products and in 2005 permitted for use in cosmetic products. Up till then MI had only been used in combination with methylcholoroisthiazolinone (MCI). MCI/MI is one of the most...... frequent causes of preservative contact allergy and early studies showed that both MI and MCI are sensitizers. The prevalence of MI contact allergy is already around 1·5% and sources of exposure are associated with occupation, cosmetic products or household products. Use of MI in industrial products...... is not restricted and cases of occupational contact allergy to MI e.g. in painters are reported. The frequency of use of MI in cosmetics is low, around 1%, while up to 16·5% of household products were preserved with MI. We found 19 (1·5%) out of 1272 cosmetic products labelled with MI, primarily rinse-off products...

  4. Soft lithography contacts to organics

    Directory of Open Access Journals (Sweden)

    Julia W.P. Hsu

    2005-07-01

    Full Text Available Organic materials play an increasingly important role in (optoelectronics, particularly in low-cost or flexible devices. A major challenge is the contact between the electrodes and the organic material. Processes developed for inorganic semiconductors are inapplicable because of the sensitivity of organic materials to heat, radiation, and chemicals. Deposition of metal(s through shadow masks onto organic materials is commonly used, despite problems with ill-controlled interfaces and material damage. In addition, conventional approaches restrict device size to >1 μm. Clearly, a better technique is needed. In this article, two soft lithography methods for making contacts to organic materials are reviewed: nanotransfer printing (nTP and soft-contact lamination (ScL. These new approaches produce devices that outperform those made by conventional methods. The link between better device performance and better interfacial control is explained, and nanoscale devices are described.

  5. The roles of contact conformity, temperature and displacement amplitude on the lubricated fretting wear of a steel-on-steel contact

    Science.gov (United States)

    Warmuth, A. R.; Sun, W.; Shipway, P. H.

    2016-10-01

    This paper investigates the effect of contact geometry, temperature and displacement amplitude on the fretting behaviour of an aero-turbo oil lubricated cylinder-on-flat contact. To be effective, the lubricant needed both to penetrate the contact and then offer protection. Lubricant penetration into the fretting contact is found to be controlled by two physical parameters, namely (i) the width of the contact that remains covered throughout the fretting test and (ii) the lubricant viscosity. The protection offered by the lubricant (assuming that it has successfully penetrated the contact) is influenced by four physical parameters, namely (i) lubricant viscosity, (ii) traverse velocity, (iii) nominal contact pressure, and (iv) chemical effects. The relationship between the three experimental parameters which were varied in the programme of work (temperature, fretting displacement and cylinder radius) and physical parameters which influence the protection offered by the lubricant film can be competing, and therefore complex wear behaviour is observed. The roles of the various parameters in controlling the wear behaviour are presented in a coherent physical framework.

  6. Multibody dynamics with unilateral contacts

    CERN Document Server

    Pfeiffer, Friedrich

    2008-01-01

    As mechanical systems become more complex so do the mathematical models and simulations used to describe the interactions of their parts. One area of multibody theory that has received a great deal of attention in recent years is the dynamics of multiple contact situations occurring in continuous joints and couplings. Despite the rapid gains in our understanding of what occurs when continuous joints and couplings interact, until now there were no books devoted exclusively to this intriguing phenomenon. Focusing on the concerns of practicing engineers, Multibody Dynamics with Unilateral Contact

  7. Contact allergy to oak moss

    DEFF Research Database (Denmark)

    Bernard, Guillaume; Giménez-Arnau, Elena; Rastogi, Suresh Chandra

    2003-01-01

    a method developed for the identification of contact allergens present in natural complex mixtures to oak moss absolute. The method is based on the combination of bioassay-guided chemical fractionation, gas chromatography-mass spectrometry analysis and structure-activity relationship studies. Our first......In addition to pure synthetic fragrance materials several natural extracts are still in use in the perfume industry. Among them oak moss absolute, prepared from the lichen Evernia prunastri (L.) Arch., is considered a major contact sensitizer and is therefore included in the fragrance mix used...

  8. CONTACT DERMATITIS AMONG CONSTRUCTION WORKERS

    Directory of Open Access Journals (Sweden)

    Ida Ayu Diah Purnama Sari

    2013-02-01

    Full Text Available Contact dermatitis is a form of skin inflammation with spongiosis or intercellular edema of the epidermis due to the interaction of irritants and allergens. While occupational contact dermatitis is an inflammation of the skin due to exposure to irritants or allergens in the workplace. One of the jobs that have a high risk of the disease are construction workers. Although the disease is rarely-threatening but can cause high morbidity and suffering for workers, so it can affect the economy and quality of life of patients.

  9. Allergic contact dermatitis and cosmetics.

    Science.gov (United States)

    Watkins, Shannon; Zippin, Jonathan

    2012-10-01

    Contact dermatitis is a common dermatologic condition that can result from exposure to allergens at home or at work. Cosmetics represent a large diverse group of products that Americans apply to their skin to treat disease or enhance beauty. With increased use of cosmetics, the rate of sensitization to many allergenic components has increased. We review the more common allergens present in cosmetics as well as the types of cosmetics that are known to contain them. With proper education and patch testing, dermatologists will be able to identify contact allergies to cosmetic ingredients and help patients avoid the offending products.

  10. Contact urticaria, allergic contact dermatitis, and photoallergic contact dermatitis from oxybenzone.

    Science.gov (United States)

    Landers, Maeran; Law, Sandra; Storrs, Frances J

    2003-03-01

    There is little literature regarding conventional patch tests and photopatch tests to oxybenzone resulting in both immediate- and delayed-type hypersensitivity reactions. A patient was patch-tested and photopatch-tested to various sunscreen chemicals. Both immediate- and delayed-type hypersensitivity reactions were observed with oxybenzone. The positive patch tests were also photoaccentuated. Oxybenzone, a common sunscreen allergen, can result in both contact urticaria and delayed-type hypersensitivity on both conventional patch testing and photopatch testing. Allergic contact dermatitis to sunscreen chemicals has traditionally included contact urticaria, allergic contact dermatitis, and photoallergic contact dermatitis. Due to the recognition of p-aminobenzoic acid (PABA) and its esters as sensitizers, the presence of benzophenones in "PABA-free" sunscreens has become more prevalent, especially in sunscreens with a sun protection factor (SPF) greater than 8. In our patient, immediate- and delayed-type hypersensitivity reactions were seen to oxybenzone (2-hydroxy-4-methoxybenzophenone, 2-benzoyl-5-methoxyphenol, benzophenone-3, Eusolex 4360, Escalol 567, EUSORB 228, Spectra-Sorb UV-9, Uvinul M-40) upon conventional patch testing and photopatch testing.

  11. EAACI Position Paper for practical patch testing in Allergic Contact Dermatitis in children

    DEFF Research Database (Denmark)

    de Waard-van der Spek, Flora B; Darsow, Ulf; Mortz, Charlotte G

    2015-01-01

    Allergic Contact Dermatitis (ACD) in children appears to be on the increase, and contact sensitization may already begin in infancy. The diagnosis of contact dermatitis requires a careful evaluation of a patient's clinical history, physical examination and skin testing. Patch testing is the gold...... allergens to be tested in children with suspected ACD. Additional tests should be performed only on specific indications. This article is protected by copyright. All rights reserved....

  12. Improving contact prediction along three dimensions.

    Directory of Open Access Journals (Sweden)

    Christoph Feinauer

    2014-10-01

    Full Text Available Correlation patterns in multiple sequence alignments of homologous proteins can be exploited to infer information on the three-dimensional structure of their members. The typical pipeline to address this task, which we in this paper refer to as the three dimensions of contact prediction, is to (i filter and align the raw sequence data representing the evolutionarily related proteins; (ii choose a predictive model to describe a sequence alignment; (iii infer the model parameters and interpret them in terms of structural properties, such as an accurate contact map. We show here that all three dimensions are important for overall prediction success. In particular, we show that it is possible to improve significantly along the second dimension by going beyond the pair-wise Potts models from statistical physics, which have hitherto been the focus of the field. These (simple extensions are motivated by multiple sequence alignments often containing long stretches of gaps which, as a data feature, would be rather untypical for independent samples drawn from a Potts model. Using a large test set of proteins we show that the combined improvements along the three dimensions are as large as any reported to date.

  13. Numerical analysis of contact line dynamics passing over a single wettable defect on a wall

    Science.gov (United States)

    Yamamoto, Yasufumi; Higashida, Shohei; Tanaka, Hiroyuki; Wakimoto, Tatsuro; Ito, Takahiro; Katoh, Kenji

    2016-08-01

    In this study, the dynamics of a contact line passing a single defect, which was represented by a locally wettable part (whose static contact angle is less than the other part, namely, chemically heterogeneous and physically flat part), was analyzed using numerical simulations employing the front-tracking method and the generalized Navier boundary condition. We observed that the contact line was distorted with a logarithmic shape far from the defect; however, the distortion was dependent on the wall velocity. The apparent (averaged) dynamic contact angle of the wall with a defect was evaluated using a macroscopic energy balance. The apparent dynamic contact angles estimated from the energy balance agree well with the arithmetic averaged angles obtained from the present simulations. The macroscopic energy balance is useful to consider the effect of heterogeneity or roughness of the wall on the relation between the dynamic contact angle and contact line speed.

  14. Moving contact line problem: Advances and perspectives

    Directory of Open Access Journals (Sweden)

    Yapu Zhao

    2014-01-01

    Full Text Available The solid-liquid interface, which is ubiquitous in nature and our daily life, plays fundamental roles in a variety of physical-chemical-biological-mechanical phenomena, for example in lubrication, crystal growth, and many biological reactions that govern the building of human body and the functioning of brain. A surge of interests in the moving contact line (MCL problem, which is still going on today, can be traced back to 1970s primarily because of the existence of the “Huh-Scriven paradox”. This paper, mainly from a solid mechanics perspective, describes very briefly the multidisciplinary nature of the MCL problem, then summarizes some major advances in this exciting research area, and some future directions are presented.

  15. The Numerical Simulation of the Flow with Contact Lines

    Institute of Scientific and Technical Information of China (English)

    ZuoweiLU; GuixiangCUI; 等

    1996-01-01

    The paper proposes a physical model for tracking the motion of the contact line and the gas-liquid interface.The local motion of the contact line at the solid wall is assumed and the interface between gas and liquid is traced by a level function.The finite volume method and staggered grids are used to solve the governing equation numerically.The motion of the water column in a vertical pipe is computed and the results are compared with experimental data in good agreement.

  16. Mathematical Modeling of Contact Resistance in Silicon Photovoltaic Cells

    KAUST Repository

    Black, J. P.

    2013-10-22

    In screen-printed silicon-crystalline solar cells, the contact resistance of a thin interfacial glass layer between the silicon and the silver electrode plays a limiting role for electron transport. We analyze a simple model for electron transport across this layer, based on the driftdiffusion equations. We utilize the size of the current/Debye length to conduct asymptotic techniques to simplify the model; we solve the model numerically to find that the effective contact resistance may be a monotonic increasing, monotonic decreasing, or nonmonotonic function of the electron flux, depending on the values of the physical parameters. © 2013 Society for Industrial and Applied Mathematics.

  17. Contact Lenses for Vision Correction

    Science.gov (United States)

    ... Follow The Academy Professionals: Education Guidelines News Multimedia Public & Patients: Contact Us About the Academy Jobs at the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms of Service For Advertisers For Media Ophthalmology Job Center © American Academy of ...

  18. Almost contact metric 3-submersions

    Directory of Open Access Journals (Sweden)

    Bill Watson

    1984-01-01

    Full Text Available An almost contact metric 3-submersion is a Riemannian submersion, π from an almost contact metric manifold (M4m+3,(φi,ξi,ηii=13,g onto an almost quaternionic manifold (N4n,(Jii=13,h which commutes with the structure tensors of type (1,1;i.e., π*φi=Jiπ*, for i=1,2,3. For various restrictions on ∇φi, (e.g., M is 3-Sasakian, we show corresponding limitations on the second fundamental form of the fibres and on the complete integrability of the horizontal distribution. Concommitantly, relations are derived between the Betti numbers of a compact total space and the base space. For instance, if M is 3-quasi-Saskian (dΦ=0, then b1(N≤b1(M. The respective φi-holomorphic sectional and bisectional curvature tensors are studied and several unexpected results are obtained. As an example, if X and Y are orthogonal horizontal vector fields on the 3-contact (a relatively weak structure total space of such a submersion, then the respective holomorphic bisectional curvatures satisfy: Bφi(X,Y=B′J′i(X*,Y*−2. Applications to the real differential geometry of Yarg-Milis field equations are indicated based on the fact that a principal SU(2-bundle over a compactified realized space-time can be given the structure of an almost contact metric 3-submersion.

  19. Forces in Liquid Metal Contacts

    DEFF Research Database (Denmark)

    Duggen, Lars; Mátéfi-Tempfli, Stefan

    2014-01-01

    Using rather well known theory about capillary bridges between two electrodes we calculate the tensile force that can be applied to liquid metal contacts in the micrometer regime. Assuming circular symmetry, full wetting of the electrodes, and neglecting gravity, we present a brief review...

  20. Allergic and irritant contact dermatitis.

    Science.gov (United States)

    Nosbaum, Audrey; Vocanson, Marc; Rozieres, Aurore; Hennino, Anca; Nicolas, Jean-François

    2009-01-01

    Irritant and allergic contact dermatitis are common inflammatory skin diseases induced by repeated skin contact with low molecular weight chemicals, called xenobiotics or haptens. Although both diseases may have similar clinical presentations, they can be differentiated on pathophysiological grounds. Irritant contact dermatitis (ICD) is a non-specific inflammatory dermatitis brought about by activation of the innate immune system by the pro-inflammatory properties of chemicals. Allergic contact dermatitis (ACD) corresponds to a delayed-type hypersensitivity response with a skin inflammation mediated by hapten-specific T cells. Recent progress in the pathophysiology of chemical-induced skin inflammation has shown that ICD and ACD are closely associated and that the best way to prevent ACD is to develop strategies to avoid ICD. The immunological diagnosis of ICD or ACD requires investigation of the presence (ACD) or absence (ICD) of antigen-specific T cells. The detection of T cells can be performed in the skin (collected from ACD lesions or positive patch tests) and/or in the blood, particularly by using the enzyme-linked immunospot assay (ELISPOT). This method, recently developed in ACD to metals, offers a new biological tool enabling the immunobiological diagnosis of ACD.

  1. Frictional heating of tribological contacts

    NARCIS (Netherlands)

    Bos, Johannes

    1995-01-01

    Wherever friction occurs, mechanical energy is transformed into heat. The tem­ perature rise associated with this heating can have an important influence on the tribological behaviour of the contacting components. Apart from determining per­ formance, thermal phenomena affect reliability and may cau

  2. Clinical update on contact allergy.

    Science.gov (United States)

    Uter, Wolfgang; Johansen, Jeanne Duus; Orton, David I; Frosch, Peter J; Schnuch, Axel

    2005-10-01

    The aim of this article is to review recent findings in contact allergy, regarding clinical research. The biocide methyldibromo glutaronitrile was identified to be an important sensitizer. Subsequently, it was banned from leave-on cosmetics in the European Union. Another group of important allergens that have been studied extensively included the fragrances oak moss absolute, isoeugenol, hydroxyisohexyl 3-cyclohexene carboxaldehyde and farnesol. A new fragrance mix II has been developed for standard testing, which includes the two latter compounds. Dose response studies have demonstrated broad individual variation of elicitation thresholds, dependent on the allergen concentration during induction, and other factors. Some unsuspected routes of exposure to allergens include oral, inhalational, connubial or airborne contact. Experimental studies provide a classification of newly introduced chemicals; increasingly, the local lymph node assay is supplementing and potentially replacing the guinea pig maximization test. Recent advances in occupational contact allergy include, for example, some attempts to improve diagnostics for epoxy resin and other plastic, glue, and cutting fluid components. Constant awareness for new allergens, confirmed by critical evaluation, standardization of patch test materials, and the identification of temporal patterns and subgroups at risk will improve both the diagnosis and prevention of allergic contact dermatitis.

  3. Doping graphene with metal contacts

    NARCIS (Netherlands)

    Giovannetti, G.; Khomyakov, Petr; Brocks, G.; Karpan, Volodymyr; van den Brink, J.; Kelly, Paul J.

    2008-01-01

    Making devices with graphene necessarily involves making contacts with metals. We use density functional theory to study how graphene is doped by adsorption on metal substrates and find that weak bonding on Al, Ag, Cu, Au, and Pt, while preserving its unique electronic structure, can still shift the

  4. Uncontrolled Selling of Contact Lenses

    Directory of Open Access Journals (Sweden)

    Cem Sundu

    2015-05-01

    Full Text Available Objectives: To evaluate the opticians’ perspective about selling and applying contact lenses (CL in the provincial centre of Mersin. Materials and Methods: Twenty opticians who work in the 4 main districts in the provincial centre of Mersin were included in the study. A questionnaire form which was prepared before was filled out by the participants. Results: Seventy-eight percent of the opticians were selling CL without prescription, whereas 25% also carried out its fitting. Seventyfive percent of the participants did not get any education about contact lenses, while 65% of them were feeling themselves disqualified about CLs. Furthermore, half of the participants did not have enough knowledge about the complications associated with CL usage and 75% of them wanted to receive information about CLs. Conclusion: As a result of the questionnaire, we found out that a significant part of the participants were both selling and fitting contact lenses without prescription. We believe that auditing the opticians is as important as educating the contact lens users. (Turk J Ophthalmol 2015; 45: 102-104

  5. Ohmic contacts to semiconducting diamond

    Science.gov (United States)

    Zeidler, James R.; Taylor, M. J.; Zeisse, Carl R.; Hewett, C. A.; Delahoussaye, Paul R.

    1990-10-01

    Work was carried out to improve the electron beam evaporation system in order to achieve better deposited films. The basic system is an ion pumped vacuum chamber, with a three-hearth, single-gun e-beam evaporator. Four improvements were made to the system. The system was thoroughly cleaned and new ion pump elements, an e-gun beam adjust unit, and a more accurate crystal monitor were installed. The system now has a base pressure of 3 X 10(exp -9) Torr, and can easily deposit high-melting-temperature metals such as Ta with an accurately controlled thickness. Improved shadow masks were also fabricated for better alignment and control of corner contacts for electrical transport measurements. Appendices include: A Thermally Activated Solid State Reaction Process for Fabricating Ohmic Contacts to Semiconducting Diamond; Tantalum Ohmic Contacts to Diamond by a Solid State Reaction Process; Metallization of Semiconducting Diamond: Mo, Mo/Au, and Mo/Ni/Au; Specific Contact Resistance Measurements of Ohmic Contracts to Diamond; and Electrical Activation of Boron Implanted into Diamond.

  6. Barrier/Cu contact resistivity

    Energy Technology Data Exchange (ETDEWEB)

    Reid, J.S.; Nicolet, M.A. [California Inst. of Tech., Pasadena, CA (United States); Angyal, M.S.; Lilienfeld, D.; Shacham-Diamand, Y. [Cornell Univ., Ithaca, NY (United States); Smith, P.M. [Sandia National Labs., Albuquerque, NM (United States)

    1995-10-17

    The specific contact resistivity of Cu with ({alpha} + {beta})-Ta, TiN, {alpha}-W, and amorphous-Ta{sub 36}Si{sub 14}N{sub 50} barrier films is measured using a novel four-point-probe approach. Geometrically, the test structures consist of colinear sets of W-plugs to act as current and voltage probes that contact the bottom of a planar Cu/barrier/Cu stack. Underlying Al interconnects link the plugs to the current source and voltmeter. The center-to-center distance of the probes ranges from 3 to 200 {micro}m. Using a relation developed by Vu et al., a contact resistivity of roughly 7 {times} 10{sup {minus}9} {Omega} cm{sup 2} is obtained for all tested barrier/Cu combinations. By reflective-mode small-angle X-ray scattering, the similarity in contact resistivity among the barrier films may be related to interfacial impurities absorbed from the deposition process.

  7. Non-contact ECG monitoring

    Science.gov (United States)

    Smirnov, Alexey S.; Erlikh, Vadim V.; Kodkin, Vladimir L.; Keller, Andrei V.; Epishev, Vitaly V.

    2016-03-01

    The research is dedicated to non-contact methods of electrocardiography. The authors describe the routine of experimental procedure and suggest the approach to solving the problems which arise at indirect signal recording. The paper presents the results of experiments conducted by the authors, covers the flow charts of ECG recorders and reviews the drawbacks of filtering methods used in foreign equivalents.

  8. Contact metallurgy optimization for ohmic contacts to InP

    DEFF Research Database (Denmark)

    Clausen, Thomas; Pedersen, Arne Skyggebjerg; Leistiko, Otto

    1991-01-01

    AuGeNi and AuZnNi metallizations to n- and p-InP were studied as a function of the annealing temperature in a Rapid Thermal Annealing (RTA) system. For n-InP (S:8×1018cm-3) a broad minimum existed from 385°C to 500°C, in which the specific contact resistance, rc, was about 10-7 ¿cm2. The lowe...

  9. 3D geophysical inversion for contact surfaces

    Science.gov (United States)

    Lelièvre, Peter; Farquharson, Colin

    2014-05-01

    Geologists' interpretations about the Earth typically involve distinct rock units with contacts (interfaces) between them. In contrast, standard minimum-structure volumetric inversions (performed on meshes of space-filling cells) recover smooth models inconsistent with such interpretations. There are several approaches through which geophysical inversion can help recover models with the desired characteristics. Some authors have developed iterative strategies in which several volumetric inversions are performed with regularization parameters changing to achieve sharper interfaces at automatically determined locations. Another approach is to redesign the regularization to be consistent with the desired model characteristics, e.g. L1-like norms or compactness measures. A few researchers have taken approaches that limit the recovered values to lie within particular ranges, resulting in sharp discontinuities; these include binary inversion, level set methods and clustering strategies. In most of the approaches mentioned above, the model parameterization considers the physical properties in each of the many space-filling cells within the volume of interest. The exception are level set methods, in which a higher dimensional function is parameterized and the contact surface is determined from the zero-level of that function. However, even level-set methods rely on an underlying volumetric mesh. We are researching a fundamentally different type of inversion that parameterizes the Earth in terms of the contact surfaces between rock units. 3D geological Earth models typically comprise wireframe surfaces of tessellated triangles or other polygonal planar facets. This wireframe representation allows for flexible and efficient generation of complicated geological structures. Therefore, a natural approach for representing a geophysical model in an inversion is to parameterize the wireframe contact surfaces as the coordinates of the nodes (facet vertices). The geological and

  10. Measuring the human psychophysiological conditions without contact

    Science.gov (United States)

    Scalise, L.; Casacanditella, L.; Cosoli, G.

    2017-08-01

    Heart Rate Variability, HRV, studies the variations of cardiac rhythm caused by the autonomic regulation. HRV analysis can be applied to the study of the effects of mental or physical stressors on the psychophysiological conditions. The present work is a pilot study performed on a 23-year-old healthy subject. The measurement of HRV was performed by means of two sensors, that is an electrocardiograph and a Laser Doppler Vibrometer, which is a non-contact device able to detect the skin vibrations related to the cardiac activity. The present study aims to evaluate the effects of a physical task on HRV parameters (in both time and frequency domain), and consequently on the autonomic regulation, and the capability of Laser Doppler Vibrometry in correctly detecting the effects of stress on the Heart Variability. The results show a significant reduction of HRV parameters caused by the execution of the physical task (i.e. variations of 25-40% for parameters in time domain, also higher in frequency domain); this is consistent with the fact that stress causes a reduced capability of the organism in varying the Heart Rate (and, consequently, a limited HRV). LDV was able to correctly detect this phenomenon in the time domain, while the parameters in the frequency domain show significant deviations with respect to the gold standard technique (i.e. ECG). This may be due to the movement artefacts that have consistently modified the shape of the vibration signal measured by means of LDV, after having performed the physical task. In the future, in order to avoid this drawback, the LDV technique could be used to evaluate the effects of a mental task on HRV signals (i.e. the evaluation of mental stress).

  11. Physical Development: Thinking Physically

    Science.gov (United States)

    Strickland, Erik

    2005-01-01

    Children grow and develop physically according to their own experiences, characteristics, and abilities. Physical development is so important and the environment should allow each child to find her space in the sunshine. This can be done by: (1) creating the right outdoor environment; (2) allowing children time to use it; (3) encouraging movement…

  12. Comparative histopathology of vitiligo and contact depigmentation

    Directory of Open Access Journals (Sweden)

    Mittal R

    1992-01-01

    Full Text Available Fifteen cases of vitiligo and 12 cases of contact depigmentation were compared histopathologically. Incontinence of melanin in dermis was seen in 33% cases of contact depigmentation and 6.6% cases of vitiligo. Mononuclear infiltrate was more in contact depigmentation and had lichenoid character at places. Vasculitis with perivascular mononuclear infiltrate was seen in all cases of contact depigmentation. It is proposed that chemicals responsible for contact destruction of melanocytes.

  13. PREFACE: Non-contact AFM Non-contact AFM

    Science.gov (United States)

    Giessibl, Franz J.; Morita, Seizo

    2012-02-01

    This special issue is focussed on high resolution non-contact atomic force microscopy (AFM). Non-contact atomic force microscopy was established approximately 15 years ago as a tool to image conducting and insulating surfaces with atomic resolution. Since 1998, an annual international conference has taken place, and although the proceedings of these conferences are a useful source of information, several key developments warrant devoting a special issue to this subject. In the theoretic field, the possibility of supplementing established techniques such as scanning tunneling microscopy (STM) and Kelvin probe microscopy with atomically resolved force micrsoscopy poses many challenges in the calculation of contrast and contrast reversal. The surface science of insulators, self-assembled monolayers and adsorbates on insulators is a fruitful field for the application of non-contact AFM: several articles in this issue are devoted to these subjects. Atomic imaging and manipulation have been pioneered using STM, but because AFM allows the measurement of forces, AFM has had a profound impact in this field as well. Three-dimensional force spectroscopy has allowed many important insights into surface science. In this issue a combined 3D tunneling and force microscopy is introduced. Non-contact AFM typically uses frequency modulation to measure force gradients and was initially used mainly in a vacuum. As can be seen in this issue, frequency modulation is now also used in ambient conditions, allowing better spatial and force resolution. We thank all of the contributors for their time and efforts in making this special issue possible. We are also very grateful to the staff of IOP Publishing for handling the administrative aspects and for steering the refereeing process. Non-contact AFM contents Relation between the chemical force and the tunnelling current in atomic point contacts: a simple model Pavel Jelínek, Martin Ondrácek and Fernando Flores Theoretical simulation of

  14. Do Nonresidential Fathers' Financial Support and Contact Improve Children's Health?

    Science.gov (United States)

    Hofferth, Sandra L; Pinzon, Angela M

    2011-06-01

    Nonresidential father investment of time and money has been shown to ameliorate the negative consequences of family dissolution on children's behavior and achievement; however, no research has shown whether this investment also has positive effects on child health. Using data from the Early Childhood Longitudinal Survey, Kindergarten cohort, this research uses a two-wave cross-lagged model to examine how child support and contact are associated with maternal reports of children's physical health over time following parental separation. Child support in kindergarten is not associated with child health in third grade. Instead, children who are healthier in kindergarten receive greater financial support from their father. Although contact and child support are positively related, greater contact is not associated with better child health.

  15. Clinical update on contact allergy

    DEFF Research Database (Denmark)

    Uter, Wolfgang; Johansen, Jeanne Duus; Orton, David I

    2005-01-01

    PURPOSE OF REVIEW: The aim of this article is to review recent findings in contact allergy, regarding clinical research. RECENT FINDINGS: The biocide methyldibromo glutaronitrile was identified to be an important sensitizer. Subsequently, it was banned from leave-on cosmetics in the European Union....... Another group of important allergens that have been studied extensively included the fragrances oak moss absolute, isoeugenol, hydroxyisohexyl 3-cyclohexene carboxaldehyde and farnesol. A new fragrance mix II has been developed for standard testing, which includes the two latter compounds. Dose response...... studies have demonstrated broad individual variation of elicitation thresholds, dependent on the allergen concentration during induction, and other factors. Some unsuspected routes of exposure to allergens include oral, inhalational, connubial or airborne contact. Experimental studies provide...

  16. Remedial Action Contacts Directory - 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    This document, which was prepared for the US Department of Energy (DOE) Office of Environmental Restoration (ER), is a directory of 2628 individuals interested or involved in environmental restoration and/or remedial actions at radioactively contaminated sites. This directory contains a list of mailing addresses and phone numbers of DOE operations, area, site, project, and contractor offices; an index of DOE operations, area, site, project, and contractor office sorted by state; a list of individuals, presented by last name, facsimile number, and e-mail address; an index of affiliations presented alphabetically, with individual contacts appearing below each affiliation name; and an index of foreign contacta sorted by country and affiliation. This document was generated from the Remedial Action Contacts Database, which is maintained by the Remedial Action Program Information Center (RAPIC).

  17. Sensing with Superconducting Point Contacts

    Directory of Open Access Journals (Sweden)

    Argo Nurbawono

    2012-05-01

    Full Text Available Superconducting point contacts have been used for measuring magnetic polarizations, identifying magnetic impurities, electronic structures, and even the vibrational modes of small molecules. Due to intrinsically small energy scale in the subgap structures of the supercurrent determined by the size of the superconducting energy gap, superconductors provide ultrahigh sensitivities for high resolution spectroscopies. The so-called Andreev reflection process between normal metal and superconductor carries complex and rich information which can be utilized as powerful sensor when fully exploited. In this review, we would discuss recent experimental and theoretical developments in the supercurrent transport through superconducting point contacts and their relevance to sensing applications, and we would highlight their current issues and potentials. A true utilization of the method based on Andreev reflection analysis opens up possibilities for a new class of ultrasensitive sensors.

  18. Heat transport through atomic contacts.

    Science.gov (United States)

    Mosso, Nico; Drechsler, Ute; Menges, Fabian; Nirmalraj, Peter; Karg, Siegfried; Riel, Heike; Gotsmann, Bernd

    2017-02-06

    Heat transport and dissipation at the nanoscale severely limit the scaling of high-performance electronic devices and circuits. Metallic atomic junctions serve as model systems to probe electrical and thermal transport down to the atomic level as well as quantum effects that occur in one-dimensional (1D) systems. Whereas charge transport in atomic junctions has been studied intensively in the past two decades, heat transport remains poorly characterized because it requires the combination of a high sensitivity to small heat fluxes and the formation of stable atomic contacts. Here we report heat-transfer measurements through atomic junctions and analyse the thermal conductance of single-atom gold contacts at room temperature. Simultaneous measurements of charge and heat transport reveal the proportionality of electrical and thermal conductance, quantized with the respective conductance quanta. This constitutes a verification of the Wiedemann-Franz law at the atomic scale.

  19. Contact dermatitis caused by preservatives.

    Science.gov (United States)

    Yim, Elizabeth; Baquerizo Nole, Katherine L; Tosti, Antonella

    2014-01-01

    Preservatives are biocidal chemicals added to food, cosmetics, and industrial products to prevent the growth of microorganisms. They are usually nontoxic and inexpensive and have a long shelf life. Unfortunately, they commonly cause contact dermatitis. This article reviews the most important classes of preservatives physicians are most likely to encounter in their daily practice, specifically isothiazolinones, formaldehyde and formaldehyde-releasers, iodopropynyl butylcarbamate, methyldibromoglutaronitrile, and parabens. For each preservative mentioned, the prevalence of sensitization, clinical presentation of contact dermatitis, patch testing concentrations, cross reactions, and related legislation will be discussed. Mandatory labeling of preservatives is required in some countries, but not required in others. Until policies are made, physicians and patients must be proactive in identifying potential sensitizers and removing their use. We hope that this article will serve as a guide for policy makers in creating legislation and future regulations on the use and concentration of certain preservatives in cosmetics and industrial products.

  20. Allergic contact dermatitis from carmine.

    Science.gov (United States)

    Shaw, Daniel W

    2009-01-01

    A 28-year-old woman developed allergic contact dermatitis within 6 to 24 hours exclusively after using carmine-containing eyeshadows and lipsticks. She had both a positive patch test result and a positive antecubital repeated open application test result with carmine 2.5% in petrolatum. Thirty other patients had negative patch test results. Carmine is a widely used pigment derived from gravid cochineal insects. Carminic acid is the source of its color. Only two previous publications describing allergic contact dermatitis from carmine could be found. The ingredient in carmine causing these delayed hypersensitivity reactions has not been studied. In contrast, there are numerous reports of immediate hypersensitivity reactions from carmine, mostly from its use in foods and beverages but also from cosmetics and pharmaceuticals. These are immunoglobulin E-mediated reactions directed against cochineal proteins.

  1. Immunology of allergic contact dermatitis.

    Science.gov (United States)

    Tončić, Ružica Jurakić; Lipozenčić, Jasna; Martinac, Ivana; Gregurić, Sanja

    2011-01-01

    Allergic contact dermatitis (ACD) is a T-cell mediated skin inflammation caused by repeated skin exposure to contact allergens. This review summarizes current knowledge on the immunology of ACD. Different phases in ACD are distinguished, i.e. sensitization, elicitation and resolution phases. We discuss contact allergen presentation and the central role of antigen presenting cells during sensitization phase. There is an extremely complex interaction of different kinds of immune cells, such as antigen presenting cells, T, B, NK lymphocytes, keratinocytes (KCs), endothelium, mast cells (MCs) and platelets, and this complex interaction is guided through orchestration of numerous cytokines and chemokines. The role of adaptive immunity has been recognized in contact hypersensitivity but we also discuss the important role of some parts of innate immunity such as natural killer T lymphocytes (NKT) and complement system. Cooperation of innate and adaptive immunity, in this case NK cells and B cells, initiates elicitation phase by complement cascade activation, vasoactive substance release and endothelial activation. KCs are not only innocent bystanders, on the contrary, they are involved in all phases of ACD, from the early phase of initiation through sending "danger" signals and activation of innate immunity, through their role in Langerhans cells (LCs) migration, T-cell trafficking, through the height of the inflammatory phase with direct interactions with epidermotropic T-cells, and finally through the resolution phase with the production of anti-inflammatory cytokines and tolerogenic presentation to effector T-cells. Th-1 and Th-17 cells are the main effector cells responsible for tissue damage. At the end, we point out several subsets of T regulatory cells, which exert down-regulatory function and regulate the magnitude and duration of inflammatory reaction.

  2. Allergic contact dermatitis to Alstroemeria.

    Science.gov (United States)

    Marks, J G

    1988-06-01

    Two female florists developed dermatitis of the fingertips. Patch testing revealed allergic contact dermatitis to the flower, Alstroemeria, used in floral arrangements. They had positive patch tests to portions of Alstroemeria, and to tuliposide A, the allergen in this plant. Vinyl gloves were not helpful since tuliposide A readily penetrates through these gloves. Nitrile gloves may be protective since they prevented positive patch test to tuliposide A.

  3. Rolling contact fatigue of ceramics

    OpenAIRE

    Hadfield, Mark

    1993-01-01

    This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University. Ceramic/ceramic and ceramic/steel contacts under lubricated rolling conditions are studied. This work is of interest to ball bearing manufacturers as the use of ceramics in the design of these components has some advantages over traditional bearing-steel materials. Low density and increased stiffness are the mechanical properties which gas-turbine and machine tool manufacturers are most likel...

  4. Contact | Office of Cancer Genomics

    Science.gov (United States)

    For more information about the Office of Cancer Genomics, please contact: Office of Cancer Genomics National Cancer Institute 31 Center Drive, 10A07 Bethesda, Maryland 20892-2580 Phone: (301) 451-8027 Fax: (301) 480-4368 Email: ocg@mail.nih.gov *Please note that this site will not function properly in Internet Explorer unless you completely turn off the Compatibility View*

  5. [Contact allergies in medical occupations].

    Science.gov (United States)

    Rustemeyer, T; Pilz, B; Frosch, P J

    1994-12-01

    Based on reports in the literature, data from the information network of German dermatology centres (Informationsverbund Dermatologischer Kliniken) and the authors own findings, a review is presented on prevalence, clinical picture and causative agents of contact allergic dermatoses in health care professions. In 1991 the proportion of suspected occupational diseases in the health care professions (including hairdressers) represented by cases of dermatitis, as reported to the responsible insurance institution, reached 72% of the total for the year (7287 out of 10127). Every 20th to 40th case was recognized as an occupational dermatosis according to German law. Accurate figures on incidence are scarce; for dentists an incidence of 0.11% has been calculated. The risk of developing occupational hand eczema has been shown to be at least three times higher for nurses than for other so-called dry professions. For persons engaged in the personal care of the ill and the elderly, relevant occupational allergens were found to be benzalkonium chloride and aldehydes in disinfectants, as well as rubber accelerators such as thiuram mix. Latex contact urticaria has increasing significance for medical personnel, with prevalence rates of sensitization between 4.5% and 10.7%. Among physicians, contact allergies to thiuram mix were found to be dominant (12.9%). For surgeons and orthopaedic surgeons, methyl methacrylate as a constituent of bone cement is of great importance. Various esters of acrylic acid and methacrylic acid are important sensitizers in the dental professions, particularly in heavily exposed dental laboratory technicians. Only a few gloves protect against these types of sensitizers. Sensitizations by medicaments can be avoided in most cases by reducing direct skin contact, as practiced with penicillin or ispaghula powder. Strategies of prevention include information of atopics regarding the increase in occupational dermatitis, the regular use of barrier creams

  6. Body contact and body language

    DEFF Research Database (Denmark)

    Winther, Helle Dagmar

    2008-01-01

    and the boundaries between self and world. In western societies, the modern premises for contact are in some ways developing from close contact to virtual communication. With this breadth of perspective in mind, the ques­tion is whether conscious and experimental work with body contact and body language in move......­ment psychology and education provide potential for intense personal develop­ment as well as for social and cultural learning processes. This performative research project originates from the research project entitled, Movement Psy­chol­ogy: The Language of the Body and the Psy­chol­ogy of Movement based...... on the Dance Therapy Form Dansergia. The author, who is a practi­tioner-researcher, is methodologically inspir­ed by phenomenology, performative methods and a narrative and auto-ethnographic approach. The project will be presented in an organic, cre­at­ive and performative way. Through a moving dia...

  7. Characterization of micro-contact resistance between a gold nanocrystalline line and a tungsten electrode probe in interconnect fatigue testing.

    Science.gov (United States)

    Ling, Xue; Wang, Yusheng; Li, Xide

    2014-10-01

    An electromechanically-coupled micro-contact resistance measurement system is built to mimic the contact process during fatigue testing of nanoscale-thickness interconnects using multiple probe methods. The design combines an optical microscope, high-resolution electronic balance, and micromanipulator-controlled electric probe, and is coupled with electrical measurements to investigate microscale contact physics. Experimental measurements are performed to characterize the contact resistance response of the gold nanocrystalline pad of a 35-nm-thick interconnect under mechanical force applied by a tungsten electrode probe. Location of a stable region for the contact resistance and the critical contact force provides better understanding of micro-contact behavior relative to the effects of the contact force and the nature of the contact surface. Increasing contact temperature leads to reduced contact resistance, softens the pad material, and modifies the contact surface. The stability of both contact resistance and interconnect resistance is studied under increasing contact force. Major fluctuations emerge when the contact force is less than the critical contact force, which shows that temporal contact resistance will affect interconnect resistance measurement accuracy, even when using the four-wire method. This performance is demonstrated experimentally by heating the Au line locally with a laser beam. Finally, the contact resistances are calculated using the LET (Li-Etsion-Talke) model together with combined Holm and Sharvin theory under various contact forces. Good agreement between the results is obtained. This research provides a way to measure change in interconnect line resistance directly under a stable contact resistance regime with a two-wire method that will greatly reduce the experimental costs.

  8. Genotyping Oral Commensal Bacteria to Predict Social Contact and Structure

    Science.gov (United States)

    Wallace, Amelia D.; Riley, Lee W.

    2016-01-01

    Social network structure is a fundamental determinant of human health, from infectious to chronic diseases. However, quantitative and unbiased approaches to measuring social network structure are lacking. We hypothesized that genetic relatedness of oral commensal bacteria could be used to infer social contact between humans, just as genetic relatedness of pathogens can be used to determine transmission chains of pathogens. We used a traditional, questionnaire survey-based method to characterize the contact network of the School of Public Health at a large research university. We then collected saliva from a subset of individuals to analyze their oral microflora using a modified deep sequencing multilocus sequence typing (MLST) procedure. We examined micro-evolutionary changes in the S. viridans group to uncover transmission patterns reflecting social network structure. We amplified seven housekeeping gene loci from the Streptococcus viridans group, a group of ubiquitous commensal bacteria, and sequenced the PCR products using next-generation sequencing. By comparing the generated S. viridans reads between pairs of individuals, we reconstructed the social network of the sampled individuals and compared it to the network derived from the questionnaire survey-based method. The genetic relatedness significantly (p-value < 0.001) correlated with social distance in the questionnaire-based network, and the reconstructed network closely matched the network derived from the questionnaire survey-based method. Oral commensal bacterial are thus likely transmitted through routine physical contact or shared environment. Their genetic relatedness can be used to represent a combination of social contact and shared physical space, therefore reconstructing networks of contact. This study provides the first step in developing a method to measure direct social contact based on commensal organism genotyping, potentially capable of unmasking hidden social networks that contribute to

  9. Apparent and Actual Dynamic Contact Angles in Confined Two-Phase Flows

    Science.gov (United States)

    Omori, Takeshi; Kajishima, Takeo

    2016-11-01

    To accurately predict the fluid flow with moving contact lines, it has a crucial importance to use a model for the dynamic contact angle which gives contact angles on the length scale corresponding to the spacial resolution of the fluid solver. The angle which a moving fluid interface forms to a solid surface deviates from an actual (microscopic) dynamic contact angle depending on the distance from the contact line and should be called an apparent (macroscopic) dynamic contact angle. They were, however, often undistinguished especially in the experimental works, on which a number of empirical correlations between a contact angle and a contact line velocity have been proposed. The present study is the first attempt to measure both apparent and actual contact angles from the identical data sets to discuss the difference and the relationship between these two contact angles of difference length scales. The study is conducted by means of numerical simulation, solving the Navier-Stokes equation and the Cahn-Hilliard equation under the generalized Navier boundary condition for the immiscible two-phase flow in channels. The present study also illustrates how the system size and the physical properties of the adjoining fluid affect the apparent and the actual dynamic contact angles. JSPS KAKENHI Grant No. 15K17974.

  10. The wetting problem of fluids on solid surfaces: Dynamics of lines and contact angle hysteresis

    OpenAIRE

    Gouin, Henri

    2001-01-01

    8 pages; International audience; In 1805, Young was the first who introduced an expression for contact angle in static, but today, the motion of the contact-line formed at the intersection of two immiscible fluids and a solid is still subject to dispute. By means of the new physical concept of line viscosity, the equations of motions and boundary conditions for fluids in contact on a solid surface together with interface and contact-line are revisited. A new Young-Dupré equation for the dynam...

  11. Bearing Stresses in Bolted Composite Joints with Different Contact Interactions.

    Directory of Open Access Journals (Sweden)

    Hilton Ahmad

    2016-04-01

    Full Text Available In a bolted joint, it has been shown to be better to model the real contact between bolt and hole than to fix the boundary of the hole edge, a practice used by most previous researchers. Master-slave interaction was implemented in ABAQUS to simulate full contact conditions. Stress distributions were plotted along net-tension plane and hole boundary. Due to geometric non-linearity, the clearance and friction coefficients used substantially effected the maximum stress on hole boundary as shown using the benchmarking work of Eriksson. A physically-based constitutive model used is based on state-of-the art fracture mechanics was used for bolted joint strength prediction. Idealized models from Hollmann were remodelled both by fixing the hole boundary (following the original author and by implementing full contact condition using CZM and XFEM. The physically-based constitutive law used independently measured of unnotched strength and fracture energy parameter for crack opening, which is calibrated from available literatures (known as apparent fracture energy. Good correlation with experimental results was found when using the real contact condition.

  12. Contact activity and dynamics of the social core

    DEFF Research Database (Denmark)

    Mones, Enys; Stopczynski, Arkadiusz; Jørgensen, Sune Lehmann

    2017-01-01

    Humans interact through numerous communication channels to build and maintain social connections: they meet face-to-face, make phone calls or send text messages, and interact via social media. Although it is known that the network of physical contacts, for example, is distinct from the network...... of the network within a low number of steps, in contrast to the nodes on the periphery. The origin and purpose of each communication network also determine the role of their respective central members: highly connected individuals in the person-to-person networks interact with their environment in a regular...... manner, while members central in the social communication networks display irregular behavior with respect to their physical contacts and are more active through irregular social events. Our results suggest that due to the inherently different functions of communication channels, each one favors...

  13. Mechanism of contact angle saturation and an energy-based model for electrowetting

    Science.gov (United States)

    Rui, Zhao; Zhong-Cheng, Liang

    2016-06-01

    Electrowetting, as a well-known approach to increasing droplet wettability on a solid surface by electrical bias, has broad applications. However, it is limited by contact angle saturation at large voltage. Although several debated hypotheses have been proposed to describe it, the physical origin of contact angle saturation still remains obscure. In this work, the physical factors responsible for the onset of contact angle saturation are explored, and the correlated theoretical models are established to characterize electrowetting behavior. Combination of the proper 3-phase system employed succeeds in dropping the saturating contact angle below 25°, and validates that the contact angle saturation is not a result of device-related imperfection. Project supported by the Fund from the Research Center of Optical Communications Engineering & Technology, Jiangsu Province, China (Grant No. ZSF0402).

  14. Contact Dermatitis, Patch Testing, and Allergen Avoidance.

    Science.gov (United States)

    Burkemper, Nicole M

    2015-01-01

    In patients presenting with a complaint of rash, contact dermatitis is often the underlying diagnosis making it an entity with which health care providers should be familiar. Contact dermatitis can be divided into irritant contact dermatitis and allergic contact dermatitis. In a patient suspected of having allergic contact dermatitis, patch testing can be done to identify specific allergens. Education focused on allergen avoidance and safe products is an integral part of treatment for the contact dermatitis patient. Knowledge of the most common allergens is helpful for clinicians to be able to provide this education.

  15. Solar cell contact formation using laser ablation

    Energy Technology Data Exchange (ETDEWEB)

    Harley, Gabriel; Smith, David D.; Cousins, Peter John

    2015-07-21

    The formation of solar cell contacts using a laser is described. A method of fabricating a back-contact solar cell includes forming a poly-crystalline material layer above a single-crystalline substrate. The method also includes forming a dielectric material stack above the poly-crystalline material layer. The method also includes forming, by laser ablation, a plurality of contacts holes in the dielectric material stack, each of the contact holes exposing a portion of the poly-crystalline material layer; and forming conductive contacts in the plurality of contact holes.

  16. Solar cell contact formation using laser ablation

    Energy Technology Data Exchange (ETDEWEB)

    Harley, Gabriel; Smith, David D.; Cousins, Peter John

    2014-07-22

    The formation of solar cell contacts using a laser is described. A method of fabricating a back-contact solar cell includes forming a poly-crystalline material layer above a single-crystalline substrate. The method also includes forming a dielectric material stack above the poly-crystalline material layer. The method also includes forming, by laser ablation, a plurality of contacts holes in the dielectric material stack, each of the contact holes exposing a portion of the poly-crystalline materiat layer; and forming conductive contacts in the plurality of contact holes.

  17. Solar cell contact formation using laser ablation

    Energy Technology Data Exchange (ETDEWEB)

    Harley, Gabriel; Smith, David; Cousins, Peter

    2012-12-04

    The formation of solar cell contacts using a laser is described. A method of fabricating a back-contact solar cell includes forming a poly-crystalline material layer above a single-crystalline substrate. The method also includes forming a dielectric material stack above the poly-crystalline material layer. The method also includes forming, by laser ablation, a plurality of contacts holes in the dielectric material stack, each of the contact holes exposing a portion of the poly-crystalline material layer; and forming conductive contacts in the plurality of contact holes.

  18. Contact Allergy in Danish Healthcare Workers

    DEFF Research Database (Denmark)

    Schwensen, Jakob F; Menné, Torkil; Sommerlund, Mette;

    2015-01-01

    . The primary objective was to determine whether healthcare work was associated with contact allergy to thiuram mix. Unadjusted univariate analyses revealed that healthcare work was significantly associated with occupational contact dermatitis and hand dermatitis. Contact allergy to thiuram mix was more common...... in healthcare workers was significantly associated with having occupational contact dermatitis, hand dermatitis and older age. In conclusion, we report here a potential problem of contact allergy to thiurams in healthcare workers with contact dermatitis. Legislative authorities may in the future focus...

  19. Origin of dynamic contact angle at the nanoscale

    Science.gov (United States)

    Lukyanov, Alex; Likhtman, Alexei

    2016-11-01

    Generation of a dynamic contact angle in the course of wetting is a fundamental phenomenon of nature. Dynamic wetting processes have a direct impact on flows at the nanoscale, and therefore, understanding them is exceptionally important to emerging technologies. Here, we reveal the microscopic mechanism of dynamic contact angle generation, which is demonstrated using large-scale molecular dynamics simulations of bead-spring model fluids. It has been shown that the main cause of local contact angle variations is the distribution of microscopic force acting at the contact line region. We were able to retrieve this force with high accuracy to understand its nature and its characteristic physical parameters. It has been directly established that the force distribution can be solely predicted on the basis of a general friction law for liquid flow at solid surfaces first formulated by Thompson & Troian on the basis of molecular dynamics simulations of Lennard-Jones liquids. The relationship with the friction law provides both an explanation of the phenomenon of dynamic contact angle and a methodology for future predictions. The mechanism is intrinsically microscopic, universal, and irreducible and is applicable to a wide range of problems associated with wetting phenomena. Deceased.

  20. Parametric Study of Liquid Contact Line Dynamics: Adhesion vs. Hydrodynamics

    OpenAIRE

    Mohammad Karim, Alireza

    2015-01-01

    There are tremendous interests regarding the wettability of solid surfaces and controlling the wettability on the solid surfaces in industry, technology such as efficiency of oil recovery, micro-fluidics and nano-fluidics, drag reduction on airplane wings, efficient power plants and many other applications. To resolve such challenges, it is required to enhance the knowledge more deeply to understand the underlying physics of fluid/solid interaction at the liquid contact line that describes th...

  1. Collecting close-contact social mixing data with contact diaries: reporting errors and biases.

    Science.gov (United States)

    Smieszek, T; Burri, E U; Scherzinger, R; Scholz, R W

    2012-04-01

    The analysis of contact networks plays a major role to understanding the dynamics of disease spread. Empirical contact data is often collected using contact diaries. Such studies rely on self-reported perceptions of contacts, and arrangements for validation are usually not made. Our study was based on a complete network study design that allowed for the analysis of reporting accuracy in contact diary studies. We collected contact data of the employees of three research groups over a period of 1 work week. We found that more than one third of all reported contacts were only reported by one out of the two involved contact partners. Non-reporting is most frequent in cases of short, non-intense contact. We estimated that the probability of forgetting a contact of ≤5 min duration is greater than 50%. Furthermore, the number of forgotten contacts appears to be proportional to the total number of contacts.

  2. EDITORIAL: Physics competitions Physics competitions

    Science.gov (United States)

    Jordens, H.; Mathelitsch, L.

    2009-11-01

    place in Changwon, South Korea, where over 50 countries were represented. The aim of this Olympiad is similar to EUSO, but on top of teamwork, members also have to participate in an individual test. Because of the importance of these international competitions for physics education, and also because of their growing number, it was seen as useful to found an umbrella organization, the World Federation of Physics Competitions (WFPhC), which would undertake tasks common to most of the competitions [11]. These are: To stimulate talent for physics by means of physics competitions in secondary schools; To stimulate meetings and conferences where people interested in physics competitions can develop and interchange their ideas within their home country; To afford the opportunity to, in particular by means of the foundation's periodical, exchange publications in the field of physics teaching; To acknowledge the merits of people who have contributed greatly to the goals of the Federation, through a WFPhC award; To afford assistance and support to countries that wish to organize physics competitions by putting them in contact with experienced countries; To promote physics and to encourage youngsters interested in physics. The WFPhC was founded in 1999 and the first and acting president is Hans Jordens, one of the authors of this article. The Federation edits a publication twice a year with an extensive collection of former or recent tasks and solutions, as well as organizational matters. It organizes every other year a Congress during which an award is giving to a person who has contributed greatly to the goals of the Federation. So far this award has been given to three people: Gunter Lind (Germany), Gunnar Tibell (Sweden) and posthumously to Waldemar Gorzkowski (Poland). 2. Physics competitions and European Journal of Physics The aim of European Journal of Physics is 'to assist in maintaining and improving the standard of taught physics in universities and other institutes of

  3. Modeling of Two-Phase Immiscible Flow with Moving Contact Lines

    Science.gov (United States)

    Abu Alsaud, Moataz; Soulaine, Cyprien; Riaz, Amir; Tchelepi, Hamdi; Stanford University Collaboration; University of Maryland, College Park Collaboration

    2015-11-01

    A new numerical method based on the implicit interface approach on Cartesian grids is proposed for modeling two-phase immiscible flow with moving contact lines. The reinitialization of level-set function by computing the minimum distance to linearly reconstructed interface to obtain signed distance function is extended to include the contact angle boundary condition. The physics of contact line dynamics is implemented using the Cox-Voinov hydrodynamic theory that efficiently captures the effect of the microscopic contact line region. The numerical method is validated through various examples. Parasitic currents are studied in the case of static and constantly advected parabolic interface intersecting the domain boundary with an imposed contact angle. Moving contact line in the viscous dominated regime is studied and verified through comparison with experiments.

  4. Effects of level of social contact on dairy calf behavior and health

    DEFF Research Database (Denmark)

    Jensen, Margit Bak; Larsen, Lars Erik

    2014-01-01

    Housing preweaned dairy calves in pairs rather than individually has been found to positively affect behavioral responses in novel social and environmental situations, but concerns have been raised that close contact among very young animals may impair their health. In previous studies, the level...... of social contact permitted in individual housing has been auditory, visual, or physical contact. It is unclear how these various levels of social contact compare with each other and to pair housing, when their effects on behavior and health are considered, and whether the timing of pair housing has...... an effect. To investigate this, 110 Holstein calves (50 males, 60 females) in 11 blocks were paired according to birth date. Within 60 h of birth, each pair of calves was allocated to 1 of 5 treatments: individual housing with auditory contact (I), individual housing with auditory and visual contact (V...

  5. Dancing in the 'Contact Zone'

    Directory of Open Access Journals (Sweden)

    Monica Wulff

    2006-09-01

    Full Text Available In October 2002 I performed and exhibited Troppo Obscura: A Peepshow of Historical Perversity at the Performance Space as part of the multicultural Arts festival, Carnivale, in Sydney, Australia. Troppo Obscura is a multimedia installation that explores some aspects of the complex relationships between the West and Asia. The work looks at a large range of possibilities, from the colonial gaze through to personal relationships forged through artistic endeavor. This paper—the first of two extended mediations on the topic—focuses on one such personal relationship addressed in the installation, namely that between traditional master mask dancer Ibu Sawitri from Cirebon on the West coast of Java, Indonesia and myself, a Sydney based contemporary dancer and performance artist. Between 1992 and 1999, the year Ibu Sawitri passed away, I spent many long-term visits learning dance and living in Ibu Sawitri’s house in Losari. This essay focuses on Ibu Sawitri’s family and dance background and how she, the younger generation of dancers, the dance context, and the dance itself, have been transformed over time as a result of rapidly changing socio-historical conditions. In the second half of this paper I move the discussion to the broader issues of cross-cultural encounters in what Pratt terms the ‘contact zone’ (1992. This includes looking at dance as an embodied practice and its function in the ‘contact zone’ as well as dealing with Spivak’s debates about the subaltern voice in reference to my telling of Ibu Sawitri’s story, both in the installation and in text. A closer analysis of the dynamics of my dance with Ibu Sawitri in the ‘contact zone’ is addressed here.

  6. Contact allergy to toothpaste flavors

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner

    1978-01-01

    Toothpaste flavors are fragrance mixtures. Oil of peppermint and spearmint, carvone and anethole are ingredients with a low sensitizing potential, but they are used in almost every brand of toothpaste and caused seven cases of contact allergy in a 6-year period at Gentofte Hospital. Toothpaste...... reactions are rare due to several reasons; local factors in the mouth, the low sensitizing potential of the flavors generally used, and the lack of recognition. It is emphasized that the toothpaste battery for patch testing has to be relevant and changed according to the consumers' and manufacturers' taste...

  7. Residual contact restraints in cryogenics

    Science.gov (United States)

    Cretegny, J. F.; Demonicault, J. M.

    The use of residual stress measurements to evaluate the state of cryogenic turbomachines, whose surfaces are worn by the working conductions in dry contact, is addressed. Their contribution to the understanding of the reasons of possible ruptures is considered. It is stated that residual stress measurements should be used as a complementary tool rather than as input data for models. It is shown, thanks to two examples concerning the ball bearings and splines of the liquid hydrogen turbopump of the Vulcain engine, what can be expected from such techniques. Total exploitation of the results has still to be done, but preliminary results are quite encouraging.

  8. Contact allergy to toothpaste flavors

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner

    1978-01-01

    Toothpaste flavors are fragrance mixtures. Oil of peppermint and spearmint, carvone and anethole are ingredients with a low sensitizing potential, but they are used in almost every brand of toothpaste and caused seven cases of contact allergy in a 6-year period at Gentofte Hospital. Toothpaste...... reactions are rare due to several reasons; local factors in the mouth, the low sensitizing potential of the flavors generally used, and the lack of recognition. It is emphasized that the toothpaste battery for patch testing has to be relevant and changed according to the consumers' and manufacturers' taste...

  9. Smart contact oscillations by IPMCs

    Science.gov (United States)

    Asanuma, H.; Asaka, K.; Su, J.; Poubel, L.; Shahinpoor, M.

    2016-02-01

    An ion migration-induced self-oscillation phenomenon observed in ionic polymer metal composites (IPMCs) is reported. These oscillations are generated from a purely static equilibrium configuration of IPMCs in loose contact with a stationary electrode, and in particular the anode of an imposed DC voltage source. Many interesting possibilities emerge, which are described in this paper. Of particular importance is the emergence of the possibility of creating tailor-made electric signals or pulse-width modulation-type signals from a DC source.

  10. Induction of formaldehyde contact sensitivity

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Boman, A; Vølund, A

    1985-01-01

    intradermal induction with 0.65% formaldehyde; in Stockholm it was 84% after induction with 0.34%. The data from the two laboratories could be described by parallel displaced dose response curves suggesting that the guinea pig strain used in Stockholm was significantly more susceptible to formaldehyde than......, and formaldehyde 1% and 0.1% was used for challenge. The incidence of contact sensitivity depended on the intradermal, but not on the topical induction dose. Statistical analyses showed a non-monotonous (non-linear) dose response relationship. The estimated maximal sensitization rate in Copenhagen was 80% after...

  11. Bibliometrics, dermatology and contact dermatitis.

    Science.gov (United States)

    Smith, Derek R

    2008-09-01

    Although the fields of bibliometrics and citation analysis have existed for many years, relatively few studies have specifically focused on the dermatological literature. This article reviews citation-based research in the dermatology journals, with a particular interest in manuscripts that have included Contact Dermatitis as part of their analysis. Overall, it can be seen that the rise of bibliometrics during the mid-20th century and its subsequent application to dermatology has provided an interesting insight into the progression of research within our discipline. Further investigation of citation trends and top-cited papers in skin research periodicals would certainly help complement the current body of knowledge.

  12. Frictionless contact of aircraft tires

    Science.gov (United States)

    Kim, Kyun O.; Tanner, John A.; Noor, Ahmed K.

    1989-01-01

    A computational procedure for the solution of frictionless contact problems of spacecraft tires was developed using a two-dimensional laminated anisotropic shell theory incorporating the effects of variations in material and geometric parameters, transverse shear deformation, and geometric nonlinearities to model the nose-gear tire of a space shuttle. Numerical results are presented for the case when the nose-gear tire is subjected to inflation pressure and pressed against a rigid pavement. The results are compared with experimental results obtained at NASA Langley, demonstrating a high accuracy of the model and the effectiveness of the computational procedure.

  13. Inferring epidemic contact structure from phylogenetic trees.

    Directory of Open Access Journals (Sweden)

    Gabriel E Leventhal

    Full Text Available Contact structure is believed to have a large impact on epidemic spreading and consequently using networks to model such contact structure continues to gain interest in epidemiology. However, detailed knowledge of the exact contact structure underlying real epidemics is limited. Here we address the question whether the structure of the contact network leaves a detectable genetic fingerprint in the pathogen population. To this end we compare phylogenies generated by disease outbreaks in simulated populations with different types of contact networks. We find that the shape of these phylogenies strongly depends on contact structure. In particular, measures of tree imbalance allow us to quantify to what extent the contact structure underlying an epidemic deviates from a null model contact network and illustrate this in the case of random mixing. Using a phylogeny from the Swiss HIV epidemic, we show that this epidemic has a significantly more unbalanced tree than would be expected from random mixing.

  14. Ensuring Safe Use of Contact Lens Solution

    Science.gov (United States)

    ... evaluating contact lens solutions and the development of Acanthamoeba keratitis, a rare but serious eye infection that's ... contact lenses to water has been associated with Acanthamoeba keratitis, a corneal infection that is resistant to ...

  15. Contact force models for multibody dynamics

    CERN Document Server

    Flores, Paulo

    2016-01-01

    This book analyzes several compliant contact force models within the context of multibody dynamics, while also revisiting the main issues associated with fundamental contact mechanics. In particular, it presents various contact force models, from linear to nonlinear, from purely elastic to dissipative, and describes their parameters. Addressing the different numerical methods and algorithms for contact problems in multibody systems, the book describes the gross motion of multibody systems by using a two-dimensional formulation based on the absolute coordinates and employs different contact models to represent contact-impact events. Results for selected planar multibody mechanical systems are presented and utilized to discuss the main assumptions and procedures adopted throughout this work. The material provided here indicates that the prediction of the dynamic behavior of mechanical systems involving contact-impact strongly depends on the choice of contact force model. In short, the book provides a comprehens...

  16. Protein Residue Contacts and Prediction Methods

    Science.gov (United States)

    Adhikari, Badri

    2016-01-01

    In the field of computational structural proteomics, contact predictions have shown new prospects of solving the longstanding problem of ab initio protein structure prediction. In the last few years, application of deep learning algorithms and availability of large protein sequence databases, combined with improvement in methods that derive contacts from multiple sequence alignments, have shown a huge increase in the precision of contact prediction. In addition, these predicted contacts have also been used to build three-dimensional models from scratch. In this chapter, we briefly discuss many elements of protein residue–residue contacts and the methods available for prediction, focusing on a state-of-the-art contact prediction tool, DNcon. Illustrating with a case study, we describe how DNcon can be used to make ab initio contact predictions for a given protein sequence and discuss how the predicted contacts may be analyzed and evaluated. PMID:27115648

  17. Contact urticaria syndrome caused by haptens

    OpenAIRE

    Gomułka, Krzysztof; Panaszek, Bernard

    2014-01-01

    In the group of urticaria, contact urticaria syndrome is a particular variety. In these patients, appearance of typical skin lesions is preceded by contact of the skin and mucous membranes with various inhaled allergens, nutrients or contact details. Furthermore, symptoms connected with contact urticaria syndrome are characterized by gradual, stepwise waveform, which can be easily generalized – patients may develop systemic symptoms similar to those found in the angioedema, asthma or anaphyla...

  18. Finite element analysis of nonsmooth contact

    OpenAIRE

    Kane, C; Repetto, E. A.; Ortiz, M.; Marsden, J. E.

    1999-01-01

    This work develops robust contact algorithms capable of dealing with complex contact situations involving several bodies with corners. Amongst the mathematical tools we bring to bear on the problem is nonsmooth analysis, following Clarke (F.H. Clarke. Optimization and nonsmooth analysis. John Wiley and Sons, New York, 1983.). We specifically address contact geometries for which both the use of normals and gap functions have difficulties and therefore precludes the application of most contact ...

  19. Review of prediction for thermal contact resistance

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Theoretical prediction research on thermal contact resistance is reviewed in this paper. In general, modeling or simulating the thermal contact resistance involves several aspects, including the descriptions of surface topography, the analysis of micro mechanical deformation, and the thermal models. Some key problems are proposed for accurately predicting the thermal resistance of two solid contact surfaces. We provide a perspective on further promising research, which would be beneficial to understanding mechanisms and engineering applications of the thermal contact resistance in heat transport phenomena.

  20. Obituary--rigid contact lenses.

    Science.gov (United States)

    Efron, Nathan

    2010-10-01

    Scleral and corneal rigid lenses represented 100 per cent of the contact lens market immediately prior to the invention of soft lenses in the mid-1960s. In the United Kingdom today, rigid lenses comprise 2 per cent of all new lens fits. Low rates of rigid lens fitting are also apparent in 27 other countries which have recently been surveyed. Thus, the 1998 prediction of the author that rigid lenses--also referred to as 'rigid gas permeable' (RGP) lenses or 'gas permeable' (GP) lenses--would be obsolete by the year 2010 has essentially turned out to be correct. In this obituary, the author offers 10 reasons for the demise of rigid lens fitting: initial rigid lens discomfort; intractable rigid lens-induced corneal and lid pathology; extensive soft lens advertising; superior soft lens fitting logistics; lack of rigid lens training opportunities; redundancy of the rigid lens 'problem solver' function; improved soft toric and bifocal/varifocal lenses; limited uptake of orthokeratology; lack of investment in rigid lenses; and the emergence of aberration control soft lenses. Rigid lenses are now being fitted by a minority of practitioners with specialist skills/training. Certainly, rigid lenses can no longer be considered as a mainstream form of contact lens correction. May their dear souls (bulk properties) rest in peace.

  1. Contact allergy to epoxy hardeners.

    Science.gov (United States)

    Aalto-Korte, Kristiina; Suuronen, Katri; Kuuliala, Outi; Henriks-Eckerman, Maj-Len; Jolanki, Riitta

    2014-09-01

    Diglycidylether of bisphenol A resin is the most important sensitizer in epoxy systems, but a minority of patients develop concomitant or solitary contact allergy to epoxy hardeners. At the Finnish Institute of Occupational Health, several in-house test substances of epoxy hardeners have been tested in a special epoxy compound patch test series. To analyse the frequency and clinical relevance of allergic reactions to different epoxy hardeners. Test files (January 1991 to March 2013) were screened for contact allergy to different epoxy hardeners, and the clinical records of patients with allergic reactions were analysed for occupation, concomitant allergic reactions, and exposure. The most commonly positive epoxy hardeners were m-xylylenediamine (n = 24), 2,4,6-tris-(dimethylaminomethyl)phenol (tris-DMP; n = 14), isophorone-diamine (n = 12), and diethylenetriamine (n = 9). Trimethylhexamethylenediamine (n = 7), tetraethylenepentamine (n = 4), and triethylenetetramine (n = 2) elicited some reactions, although most patients were found to have no specific exposure. Allergic reactions to hexamethylenetetramine, dimethylaminopropylamine and ethylenediamine dihydrochloride were not related to epoxy products. Tris-DMP is an important sensitizer in epoxy hardeners, and should be included in the patch test series of epoxy chemicals. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  2. Contact allergy epidemics and their controls

    DEFF Research Database (Denmark)

    Thyssen, Jacob Pontoppidan; Johansen, Jeanne Duus; Menné, Torkil

    2007-01-01

    Contact dermatitis can be severe and lead to sick leave as well as significant healthcare expenses. The aim of this review is to present the published knowledge on 6 historical epidemics of contact allergy to apply this knowledge on the prevention and control of future contact allergy epidemics...

  3. Distance upon contact: Determination from roughness profile

    NARCIS (Netherlands)

    van Zwol, P.J.; Svetovoy, Vitaly; Palasantzas, G.

    2009-01-01

    The point at which two random rough surfaces make contact takes place at the contact of the highest asperities. The distance upon contact d0 in the limit of zero load has crucial importance for determination of dispersive forces. Using gold films as an example we demonstrate that for two parallel

  4. Moving droplets: The measurement of contact lines

    NARCIS (Netherlands)

    Poelma, C.; Franken, M.J.Z.; Kim, H.; Westerweel, J.

    2014-01-01

    Contact lines are the locations where a gas, liquid and a solid meet. From everyday experience we know that such contact lines can be mobile, for example in the case of a water droplet sliding over a glass surface. However, the continuum description of the flow towards or away from a contact line im

  5. Resistance contact thin-film resistor

    Directory of Open Access Journals (Sweden)

    Spirin V. G.

    2008-10-01

    Full Text Available The analytical model of the calculation of the contact resistance of the thin-film resistor is Offered. The Explored dependency of the contact resistance from wedge of the pickling. The Considered influence adhesive layer on warm-up stability of the resistor. They Are Received formulas of the calculation systematic and casual inaccuracy contributed by contact resistance.

  6. 1/4-pinched contact sphere theorem

    DEFF Research Database (Denmark)

    Ge, Jian; Huang, Yang

    2016-01-01

    Given a closed contact 3-manifold with a compatible Riemannian metric, we show that if the sectional curvature is 1/4-pinched, then the contact structure is universally tight. This result improves the Contact Sphere Theorem in [EKM12], where a 4/9-pinching constant was imposed. Some tightness res...

  7. Sinterless Formation Of Contacts On Indium Phosphide

    Science.gov (United States)

    Weizer, Victor G.; Fatemi, Navid S.

    1995-01-01

    Improved technique makes it possible to form low-resistivity {nearly equal to 10(Sup-6) ohm cm(Sup2)} electrical contacts on indium phosphide semiconductor devices without damaging devices. Layer of AgP2 40 Angstrom thick deposited on InP before depositing metal contact. AgP2 interlayer sharply reduces contact resistance, without need for sintering.

  8. Reliability growth of thin film resistors contact

    Directory of Open Access Journals (Sweden)

    Lugin A. N.

    2010-10-01

    Full Text Available Necessity of resistive layer growth under the contact and in the contact zone of resistive element is shown in order to reduce peak values of current flow and power dissipation in the contact of thin film resistor, thereby to increase the resistor stability to parametric and catastrophic failures.

  9. FE-MODELLING OF A CONTACT LAYER BETWEEN ELEMENTS JOINED IN PRELOADED BOLTED CONNECTIONS FOR THE OPERATIONAL CONDITION

    Directory of Open Access Journals (Sweden)

    Rafał Grzejda

    2014-11-01

    Full Text Available Modelling and calculations of a contact layer between elements joined in a preloaded bolted connection for the operational condition are presented. The physical model of the bolted connection is based on a flexible flange element that is joined with a rigid support by means of the no-bolt model (at the assembly stage or the rigid body bolt model (at the operational stage. The contact layer between joined elements is described as the nonlinear Winkler model. The contact joint model considering an experimental normal elastic characteristic is presented. Examples of normal contact pressure and normal contact deformations distributions are contained.

  10. Super-sensitive Molecule-hugging Graphene Nanopores

    CERN Document Server

    Garaj, Slaven; Branton, Daniel; Golovchenko, Jene A

    2012-01-01

    Longitudinal resolution and lateral sensitivity are decisive characteristics that determine the suitability of a nanopore sensor for sequencing a strand of DNA as well as other important polymers. Previous modeling of DNA induced ionic current blockades in single atom thick graphene nanopores has shown these nanopores to have sufficient longitudinal resolution to distinguish individual nucleobases along the length of a DNA molecule. Here we experimentally focus on the sensitivity to small changes in DNA diameter that can be discerned with graphene nanopores. We show that remarkably large sensitivities (0.5 nA/A)are obtained when the nanopore is tailored to have a diameter close to that of the polymer of interest. Our results have been obtained with double-stranded DNA (dsDNA). Smaller graphene nanopores that can be tuned to the diameter of single-stranded DNA (ssDNA) for sequencing have only recently been demonstrated. Our results indicate that nanopore sensors based on such pores will provide excellent resol...

  11. Contact hypersensitivity after tongue piercing

    Directory of Open Access Journals (Sweden)

    Ananta Herachakri P

    2010-09-01

    Full Text Available Background: Recently tongue piercing has become increasingly popular in the society. Several case reports have presented various complications of tongue piercing. However, there is no scientific evidence about contact hypersensitivity to tongue piercing. Purpose: The aim of this study was to investigate the contact hypersensitivity after using tongue piercing. Methods: Nineteen male Rattus norvegicus were divided into three groups: group A treated with vaseline on the back and dorsum tongue (control group, group B (I treated with HgCl2 10% cream on the tongue dorsum, group B (II treated with tongue piercing for 10 days and group C with HgCl 2 10% cream on the back, ear lobe, and tongue, then re-exposure with same materials on ear, back and tongue for 24 and 48 hours. Before and after 24 and 48 hours applications, ear width was measured with sliding caliper. At the end of treatments, the rats were sacrificed. All tissue specimens were made for Hematoylin Eosine (H&E staining examination. The number of mononuclear cells was counted under light microscope Data was analyzed with One-Way ANOVA followed by LSD (p<0.05. Results: The result of this study showed that there were a significant difference of the thickness of ear lobe and the number of mononuclear cells (lymphocyte and monocyte among all groups. Conclusion: It is concluded that tongue piercing induce contact hypersensitivity.Latar belakang: Saat ini pemakaian tongue piercing sangat popular di masyarakat. Beberapa laporan kasus menunjukkan bahwa tongue piercing menimbulkan beberapa komplikasi. Namun, belum ada bukti ilmiah mengenai reaksi hipesensitivitas tongue piercing. Tujuan: Untuk mengetahui reaksi hipersensitivitas setelah menggunakan tongue piercing. Metode: Sembilan belas tikus jantan Rattus novergicus yang dibagi dalam tiga kemlompok yaitu: grup A diberi perlakuan dengan vaselin pada punggung dan dorsum lidah, grup B (I diberi perlakuan dengan krim HgCl2 10% pada dorsum lidah dan B

  12. Nature Contacts: Employee Wellness in Healthcare.

    Science.gov (United States)

    Trau, Deborah; Keenan, Kimberly A; Goforth, Meggan; Large, Vernon

    2016-04-01

    This study was designed to ascertain the amount of outdoor, indoor, and indirect nature contact exposures hospital employees have in a workweek. Hospital employees have been found particularly vulnerable to work-related stress. Increasing the nature contact exposure for hospital employees can reduce perceived stress; stress-related health behaviors; and stress-related health outcomes from outdoor, indoor, and indirect exposures to nature. Staff on the fourth floor postsurgical unit of a large hospital (N = 42) were ask to participate in an employee questionnaire "nature contact questionnaire". This 16-item nature environment questionnaire measures the amount and types of nature contact exposures employees have during a workweek. Majority of employees reported few, if any, nature contact exposures, specifically in the area of outdoor nature contacts with limited indoor and indirect contacts. These results indicated that employees on the fourth floor postsurgical floor have limited ability to reduce stress through nature contact exposures which could impact their perceived levels of work stress and stress-related behaviors and health outcomes. Nature contact exposures are both a relatively easy and an inexpensive way to improve employee stress. These findings indicate limitations to employees' exposure to nature contacts. Healthcare environments would benefit from a concerted effort to provide increased outdoor, indoor, and indirect nature contact exposures for employees. © The Author(s) 2015.

  13. Contact angle of water on iron ore fines: Measurement and analysis

    Directory of Open Access Journals (Sweden)

    Huang X.B.

    2015-01-01

    Full Text Available The relative contact angle (θRCA for seven iron ore fines was measured by using Washburn Osmotic Pressure method under laboratory conditions. By choosing cyclohexane as the reference that can perfectly wet iron ore particles, the relative contact angles were measured and varied from 57° to 73°. With the volume % of goethite (φG as the variable, a new model for relative contact angle was developed. The expected relative contact angle for pure goethite is about 56°, while that for goethite free samples is about 77°. Physical properties, such as surface morphology (SMI and pore volume (Vpore can influence the relative contact angle. The φG can be expressed as a function of SMI and VPore. Thus, we inferred that the relative contact angle is a function of φG for the iron ores used. The measured relative contact angles were found to be in good agreement (Radj 2 >0.97 with the calculated ones based on the research from Iveson, et al. (2004. Comparing with the model developed by Iveson et al.(2004, the new model for contact angle proposed in this paper is similar, but more detailed with two meaningful physical parameters. The modification of physicochemical properties on iron ores would be another topic in the further study on granulation.

  14. International rigid contact lens prescribing.

    Science.gov (United States)

    Efron, Nathan; Morgan, Philip B; Helland, Magne; Itoi, Motozumi; Jones, Deborah; Nichols, Jason J; van der Worp, Eef; Woods, Craig A

    2010-06-01

    Rigid lenses have been fitted less since the introduction of soft lenses nearly 40 years ago. Data that we have gathered from annual contact lens fitting surveys conducted in Australia, Canada, Japan, the Netherlands, Norway, the UK and the USA between 2000 and 2008 facilitate an accurate characterization of the pattern of the decline of rigid lens fitting during the first decade of this century. There is a trend for rigid lenses to be utilized primarily for refitting those patients who are already successful rigid lens wearers-most typically older females being refit with higher Dk materials. Rigid lenses are generally fitted on a full-time basis (four or more days of wear per week) without a planned replacement schedule. Orthokeratology is especially popular in the Netherlands, but is seldom prescribed in the other countries surveyed.

  15. Single-contact tunneling thermometry

    Energy Technology Data Exchange (ETDEWEB)

    Maksymovych, Petro

    2016-02-23

    A single-contact tunneling thermometry circuit includes a tunnel junction formed between two objects. Junction temperature gradient information is determined based on a mathematical relationship between a target alternating voltage applied across the junction and the junction temperature gradient. Total voltage measured across the junction indicates the magnitude of the target alternating voltage. A thermal gradient is induced across the junction. A reference thermovoltage is measured when zero alternating voltage is applied across the junction. An increasing alternating voltage is applied while measuring a thermovoltage component and a DC rectification voltage component created by the applied alternating voltage. The target alternating voltage is reached when the thermovoltage is nullified or doubled by the DC rectification voltage depending on the sign of the reference thermovoltage. Thermoelectric current and current measurements may be utilized in place of the thermovoltage and voltage measurements. The system may be automated with a feedback loop.

  16. Contact dermatitis in Alstroemeria workers.

    Science.gov (United States)

    van der Mei, I A; de Boer, E M; Bruynzeel, D P

    1998-09-01

    Hand dermatitis is common in workers in the horticultural industry. This study determined the prevalence of hand dermatitis in workers of Alstroemeria cultivation, investigated how many workers had been sensitized by tulipalin A (the allergen in Alstroemeria) and took stock of a wide range of determinants of hand dermatitis. The 12-month period prevalence of major hand dermatitis amounted to 29.5% whereas 7.4% had minor dermatitis. Of these workers, 52.1% were sensitized for tulipalin A. Several personal and work-related determinants played a role in the multifactorial aetiology of hand dermatitis. Factors which showed a significant relationship with major hand dermatitis were: female sex, atopic dermatitis, chapped hands and the frequency of washing hands. It may be concluded that the Alstroemeria workers are a population at risk of developing contact dermatitis and it might be useful to carry out an educational campaign to lower the high prevalence.

  17. Contact lenses, migraine, and allodynia

    Directory of Open Access Journals (Sweden)

    Ozgur Bulent Timucin

    2016-01-01

    Full Text Available Clinical trials and electrophysiologic studies demonstrated increased perceptual sensitivity in patients suffering from migraines. At least, one triggering factor is described in 85% of migraine patients. The aim of this report was to investigate the relationship between contact lens (CL usage and migraine attacks in two cases. Two patients who were diagnosed with migraine reported that the frequency of migraine attacks increased after they switched to using CL with different base curves (BCs. These two patients, who began using CL with different BCs experienced discomfort and dryness of the eye. The ocular complaints were followed by migraine attacks. CL intolerance was also developed during migraine attack in one of the cases. The frequency of migraine attacks decreased and allodynia relieved significantly when flatter BCs were selected. CL related stimulus could have triggered the migraine attack. CLs should be well fitted in migraine patients with allodynia.

  18. Contact process with temporal disorder

    Science.gov (United States)

    Barghathi, Hatem; Vojta, Thomas; Hoyos, José A.

    2016-08-01

    We investigate the influence of time-varying environmental noise, i.e., temporal disorder, on the nonequilibrium phase transition of the contact process. Combining a real-time renormalization group, scaling theory, and large scale Monte-Carlo simulations in one and two dimensions, we show that the temporal disorder gives rise to an exotic critical point. At criticality, the effective noise amplitude diverges with increasing time scale, and the probability distribution of the density becomes infinitely broad, even on a logarithmic scale. Moreover, the average density and survival probability decay only logarithmically with time. This infinite-noise critical behavior can be understood as the temporal counterpart of infinite-randomness critical behavior in spatially disordered systems, but with exchanged roles of space and time. We also analyze the generality of our results, and we discuss potential experiments.

  19. Interdigitated back contact solar cells

    Science.gov (United States)

    Lundstrom, M. S.; Schwartz, R. J.

    1980-08-01

    The interdigitated back contact solar cell (IBC cell) was shown to possess a number of advantages for silicon solar cells, which operate at high concentration. A detailed discussion of the factors which need to be considered in the analysis of semiconducting devices which utilize heavily doped regions such as those which are found in solar cells in both the emitter and in the back surface field regions is given. This discussion covers the questions of: how to handle degeneracy, how to compute carrier concentrations in the absence of knowledge of the details of the band structure under heavily doped conditions, and how to reconcile the usual interpretation of heavy doping as a rigid shift of the bands with the band tailing and impurity level conduction models. It also discusses the reasons for the observed discrepancies between various experimental measurements of bandgap narrowing.

  20. A 3D contact analysis approach for the visualization of the electrical contact asperities

    Science.gov (United States)

    Swingler, Jonathan

    2017-01-01

    The electrical contact is an important phenomenon that should be given into consideration to achieve better performance and long term reliability for the design of devices. Based upon this importance, the electrical contact interface has been visualized as a ‘‘3D Contact Map’’ and used in order to investigate the contact asperities. The contact asperities describe the structures above and below the contact spots (the contact spots define the 3D contact map) to the two conductors which make the contact system. The contact asperities require the discretization of the 3D microstructures of the contact system into voxels. A contact analysis approach has been developed and introduced in this paper which shows the way to the 3D visualization of the contact asperities of a given contact system. For the discretization of 3D microstructure of contact system into voxels, X-ray Computed Tomography (CT) method is used in order to collect the data of a 250 V, 16 A rated AC single pole rocker switch which is used as a contact system for investigation. PMID:28105383

  1. Contact resistance at planar metal contacts on bilayer graphene and effects of molecular insertion layers

    Science.gov (United States)

    Nouchi, Ryo

    2017-03-01

    The possible origins of metal–bilayer graphene (BLG) contact resistance are investigated by taking into consideration the bandgap formed by interfacial charge transfer at the metal contacts. Our results show that a charge injection barrier (Schottky barrier) does not contribute to the contact resistance because the BLG under the contacts is always degenerately doped. We also showed that the contact-doping-induced increase in the density of states (DOS) of BLG under the metal contacts decreases the contact resistance owing to enhanced charge carrier tunnelling at the contacts. The contact doping can be enhanced by inserting molecular dopant layers into the metal contacts. However, carrier tunnelling through the insertion layer increases the contact resistance, and thus, alternative device structures should be employed. Finally, we showed that the inter-band transport by variable range hopping via in-gap states is the largest contributor to contact resistance when the carrier type of the gated channel is opposite to the contact doping carrier type. This indicates that the strategy of contact resistance reduction by the contact-doping-induced increase in the DOS is effective only for a single channel transport branch (n- or p-type) depending on the contact doping carrier type.

  2. Contact angle hysteresis of microbead suspensions.

    Science.gov (United States)

    Waghmare, Prashant R; Mitra, Sushanta K

    2010-11-16

    Microbead suspensions are often used in microfluidic devices for transporting biomolecules. An experimental investigation on the wettability of microbead suspension is presented in this study. The variation in the surface tension and the equilibrium contact angle with the change in the volume fraction of the microbead is presented here. The surface tension of the microbead suspension is measured with the pendant drop technique, whereas the dynamic contact angle measurements, i.e., advancing and receding contact angles, are measured with the sessile drop technique. An equilibrium contact angle of a suspension with particular volume fraction is determined by computing an average over the measured advancing and receding contact angles. It is observed that the surface tension and the equilibrium contact angle determined from advancing and receding contact angles vary with the magnitude of the microbeads volume fraction in the suspension. A decrease in the surface tension with an increase in the volume fraction of the microbead suspension is observed. The advancement and the recession in contact line for dynamic contact angle measurements are achieved with the motorized dosing mechanism. For microbead suspensions, the advancement of the contact line is faster as compared to the recession of the contact line for the same flow rate. The presence of microbeads assists in the advancement and the recession of the contact line of the suspension. A decrease in the equilibrium contact angles with an increase in the microbead suspension volume fraction is observed. Inclusion of microbeads in the suspension increases the wetting capability for the considered combination of the microbead suspension and substrate. Finally, empirical correlations for the surface tension and the contact angle of the suspension as a function of microbead volume fraction are proposed. Such correlations can readily be used to develop mechanistic models for the capillary transport of microbead

  3. Contact sensitisation and allergic contact dermatitis: immunobiological mechanisms.

    Science.gov (United States)

    Friedmann, Peter S

    2006-03-15

    The dose-response relationships of the human immune system can be defined using the induction and elicitation of lymphocyte mediated allergic reactions to experimental contact sensitisers such as dinitrochlorobenzene (DNCB). Five groups of healthy volunteers received a sensitising dose of DNCB applied to a 3 cm diameter circle on the volar forearm. Doses applied were 62.5 microg, 125 microg, 250 microg, 500 microg and 1,000 microg. Four weeks later a concentration series of 3.125 microg, 6.25 microg, 12.5 microg and 25 microg was applied to the upper inner arm on 1cm paper discs which were removed after 6h. Forty-eight hours later the responses were scored clinically and thickness measured with callipers. The proportion of people reacting to the challenge doses showed a sigmoid log-dose-response curve, 100% reacting to 500 microg. The responses to challenge also showed a log-dose-reponse. As sensitising dose increased so more people were sensitised to a proportionately greater degree. These dose-response relationships reflect the effects of increasing the concentration of sensitiser on a fixed area. The effect was examined of keeping the concentration per sq cm constant but of varying the total area. When 35.4 microg/cm(2), which sensitised 80% of people when applied to a circle 3 cm diameter (area 7.1cm(2)), was applied on a 1.5 cm diameter circle or 4.5 cm diameter, there were no differences in the proportions sensitised or their degree of reactivity. This was clearly on the plateau for the sensitising effect. However, when the same concentration per cm(2) was applied on a 3mm diameter area much weaker sensitisation was obtained. This shows the concentration of sensitiser per unit area is the critical determinant of whether sensitisation occurs, whereas the total dose may be varied over a wide range, but if the concentration per unit area is constant there is no effect on sensitising potency. In other words few Langerhans cells presenting many antigen molecules

  4. Turnover among High School Physics Teachers. Focus On

    Science.gov (United States)

    White, Susan; Tesfaye, Casey Langer

    2011-01-01

    In the fall of 2008 the authors contacted a representative sample of over 3,600 high schools in the United States, both public and private, to determine whether or not physics was taught there. They received responses from over 99% of the schools. For the schools which indicated they were offering physics, the authors obtained contact information…

  5. Become a contact person for journalists

    CERN Multimedia

    2006-01-01

    Are you a scientist in one of CERN's fields of excellence (theoretical or experimental physics, technology or computing)? Have you been at CERN for at least two years and are you familiar with its activities? Do you enjoy communicating and are you able to convey your knowledge to others? Are you available to provide answers to journalists'questions as and when necessary? If so, the Communications Group would like to hear from you. Every year, the Press Office welcomes over 500 journalists who come to visit the Laboratory and find out about its research activities and the technologies developed here. As the commissioning of the LHC approaches, the number of journalists will increase. The Communications Group is offering you the opportunity to become a contact person for media representatives coming to CERN. In order to prepare you for your role, the HR Training and Development Group and the Communications Group have put together a training course on communicating with the media. The course lasts one day and...

  6. Who Teaches High School Physics? Results from the 2008-09 Nationwide Survey of High School Physics Teachers. Focus On

    Science.gov (United States)

    White, Susan; Tesfaye, Casey Langer

    2010-01-01

    In the fall of 2008, the authors contacted a representative sample of over 3,600 high schools in the U.S., both public and private, to determine whether or not physics was taught there. They received responses from over 99% of the schools. For the schools which indicated they were offering physics, they obtained contact information for the…

  7. High School Physics Courses & Enrollments: Results from the 2008-09 Nationwide Survey of High School Physics Teachers. Focus On

    Science.gov (United States)

    White, Susan; Tesfaye, Casey Langer

    2010-01-01

    In the fall of 2008, the authors contacted a representative sample of over 3,600 high schools in the U.S., both public and private, to determine whether or not physics was taught there. They received responses from over 99% of the schools. For the schools which indicated they were offering physics, they obtained contact information for the…

  8. High School Physics Availability: Results from the 2008-09 Nationwide Survey of High School Physics Teachers. Focus On

    Science.gov (United States)

    White, Susan; Tesfaye, Casey Langer

    2010-01-01

    In the fall of 2008, the authors contacted a representative sample of over 3,600 high schools in the U.S.--both public and private--to determine whether or not physics was taught there. They received responses from over 99% of the schools. For the schools which indicated they were offering physics, they obtained contact information for the…

  9. On numerical modelling of contact lines in fluid flows

    CERN Document Server

    Pelinovsky, Dmitry E

    2013-01-01

    We study numerically a reduced model proposed by Benilov and Vynnycky (J. Fluid Mech. 718 (2013), 481), who examined the behavior of a contact line with a 180-degree contact angle between liquid and a moving plate, in the context of a two-dimensional Couette flow. The model is given by a linear fourth-order advection-diffusion equation with an unknown velocity, which is to be determined dynamically from an additional boundary condition at the contact line. The main claim of Benilov and Vynnycky is that for any physically relevant initial condition, there is a finite positive time at which the velocity of the contact line tends to negative infinity, whereas the profile of the fluid flow remains regular. Additionally, it is claimed that the velocity behaves as the logarithmic function of time near the blow-up time. We simulate dynamics of this model under different initial conditions and confirm the first claim. However, we also show that the blow-up behavior is better approximated by a power function, compared...

  10. Unusual Contact-Line Dynamics of Thick Films and Drops

    Science.gov (United States)

    Veretennikov, Igor; Agarwal, Abhishek; Indeikina, Alexandra; Chang, Hsueh-Chia

    1999-01-01

    We report several novel phenomena In contact-line and fingering dynamics of macroscopic spinning drops and gravity-driven films with dimensions larger than the capillary length. It is shown through experimental and theoretical analysis that such macroscopic films can exhibit various interfacial shapes, including multi valued ones, near the contact line due to a balance between the external body forces with capillarity. This rich variety of front shapes couples with the usual capillary, viscous, and intermolecular forces at the contact line to produce a rich and unexpected spectrum of contact-line dynamics. A single finger develops when part of the front becomes multivalued on a partially wetting macroscopic spinning drop in contrast to a different mechanism for microscopic drops of completely wetting fluids. Contrary to general expectation, we observe that, at high viscosity and low frequencies of rotation, the speed of a glycerine finger increases with increasing viscosity. Completely wetting Dow Corning 200 Fluid spreads faster over a dry inclined plane than a prewetted one. The presence of a thin prewetted film suppresses fingering both for gravity-driven flow and for spin coating. We analyze some of these unique phenomena in detail and offer qualitative physical explanations for the others.

  11. Physical Allergy

    Science.gov (United States)

    ... Appears Safe in Study Additional Content Medical News Physical Allergy By Peter J. Delves, PhD, Professor of ... Disorders Exercise-Induced Allergic Reactions Food Allergy Mastocytosis Physical Allergy Seasonal Allergies Year-Round Allergies A physical ...

  12. Sports physical

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/patientinstructions/000673.htm Sports physical To use the sharing features on this page, ... routine checkups. Why do you Need a Sports Physical? The sports physical is done to: Find out ...

  13. Experimental determination of thermal contact conductance between pressure and calandria tubes of Indian pressurised heavy water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Dureja, A.K., E-mail: akdureja@barc.gov.in [Reactor Design & Development Group, Bhabha Atomic Research Centre, Mumbai (India); Pawaskar, D.N.; Seshu, P. [Department of Mechanical Engineering, Indian Institute of Technology Bombay, Mumbai (India); Sinha, S.K. [Reactor Design & Development Group, Bhabha Atomic Research Centre, Mumbai (India); Sinha, R.K. [Department of Atomic Energy, OYC, Near Gateway of India, Mumbai (India)

    2015-04-01

    Highlights: • We established an experimental facility to measure thermal contact conductance between disc shaped specimens. • We measured thermal contact conductance between Zr-2.5Nb alloy pressure tube (PT) material and Zr-4 calandria tube (CT) material. • We concluded that thermal contact conductance is a linear function of contact pressure for interface of PT and CT up to 10 MPa contact pressure. • We concluded that thermal contact conductance is a weak function of interface temperature. - Abstract: Thermal contact conductance (TCC) is one of the most important parameters in determining the temperature distribution in contacting structures. Thermal contact conductance between the contacting structures depends on the mechanical properties of underlying materials, thermo-physical properties of the interstitial fluid and surface condition of the structures coming in contact. During a postulated accident scenario of loss of coolant with coincident loss of emergency core cooling system in a tube type heavy water nuclear reactor, the pressure tube is expected to sag/balloon and come in contact with outer cooler calandria tube to dissipate away the heat generated to the moderator. The amount of heat thus transferred is a function of thermal contact conductance and the nature of contact between the two tubes. An experimental facility was designed, fabricated and commissioned to measure thermal contact conductance between pressure tube and calandria tube specimens. Experiments were conducted on disc shaped specimens under axial contact pressure in between mandrels. Experimental results of TCC and a linear correlation as a function of contact pressure have been reported in this paper.

  14. Dynamic contact angle measurements on superhydrophobic surfaces

    Science.gov (United States)

    Kim, Jeong-Hyun; Kavehpour, H. Pirouz; Rothstein, Jonathan P.

    2015-03-01

    In this paper, the dynamic advancing and receding contact angles of a series of aqueous solutions were measured on a number of hydrophobic and superhydrophobic surfaces using a modified Wilhelmy plate technique. Superhydrophobic surfaces are hydrophobic surfaces with micron or nanometer sized surface roughness. These surfaces have very large static advancing contact angles and little static contact angle hysteresis. In this study, the dynamic advancing and dynamic receding contact angles on superhydrophobic surfaces were measured as a function of plate velocity and capillary number. The dynamic contact angles measured on a smooth hydrophobic Teflon surface were found to obey the scaling with capillary number predicted by the Cox-Voinov-Tanner law, θD3 ∝ Ca. The response of the dynamic contact angle on the superhydrophobic surfaces, however, did not follow the same scaling law. The advancing contact angle was found to remain constant at θA = 160∘, independent of capillary number. The dynamic receding contact angle measurements on superhydrophobic surfaces were found to decrease with increasing capillary number; however, the presence of slip on the superhydrophobic surface was found to result in a shift in the onset of dynamic contact angle variation to larger capillary numbers. In addition, a much weaker dependence of the dynamic contact angle on capillary number was observed for some of the superhydrophobic surfaces tested.

  15. Diagnosis and management of contact dermatitis.

    Science.gov (United States)

    Usatine, Richard P; Riojas, Marcela

    2010-08-01

    Contact dermatitis is a common inflammatory skin condition characterized by erythematous and pruritic skin lesions that occur after contact with a foreign substance. There are two forms of contact dermatitis: irritant and allergic. Irritant contact dermatitis is caused by the non-immune-modulated irritation of the skin by a substance, leading to skin changes. Allergic contact dermatitis is a delayed hypersensitivity reaction in which a foreign substance comes into contact with the skin; skin changes occur after reexposure to the substance. The most common substances that cause contact dermatitis include poison ivy, nickel, and fragrances. Contact dermatitis usually leads to erythema and scaling with visible borders. Itching and discomfort may also occur. Acute cases may involve a dramatic flare with erythema, vesicles, and bullae; chronic cases may involve lichen with cracks and fissures. When a possible causative substance is known, the first step in confirming the diagnosis is determining whether the problem resolves with avoidance of the substance. Localized acute allergic contact dermatitis lesions are successfully treated with mid- or high-potency topical steroids, such as triamcinolone 0.1% or clobetasol 0.05%. If allergic contact dermatitis involves an extensive area of skin (greater than 20 percent), systemic steroid therapy is often required and offers relief within 12 to 24 hours. In patients with severe rhus dermatitis, oral prednisone should be tapered over two to three weeks because rapid discontinuation of steroids can cause rebound dermatitis. If treatment fails and the diagnosis or specific allergen remains unknown, patch testing should be performed.

  16. Conjunctival impression cytology in contact lens wearers.

    Directory of Open Access Journals (Sweden)

    Simon Priya

    2002-01-01

    Full Text Available PURPOSE: To evaluate the cytological changes in conjunctiva following regular contact lens wear and to determine the correlation, if any, between severity of cytological alteration and symptoms related to contact lens wear. METHODS: One hundred eyes (50 normal asymptomatic subjects who served as a control group were studied by conjunctival impression cytology (CIC. These subjects were fitted with rigid gas permeable (RGP or soft contact lenses and were followed up at the end of 3 and 6 months. At each follow-up visit the CIC was repeated. A filter paper with the impression specimen was stained with periodic acid schiff (PAS and haematoxylin stain to study goblet cell loss. Papanicolaou stain was done to study squamous metaplasia. The cytological changes were graded using the system described by Natadisastra et al. RESULTS: Severity of cytological changes increased with the duration of contact lens wear (P = 0.00001. At the end of 6 months, 60% of symptomatic eyes wearing soft contact lens and RGP lens showed abnormal CIC changes. None of the asymptomatic RGP contact lens wearing eyes showed abnormal CIC changes whereas 33.4% of the asymptomatic soft contact lens wearing eyes showed abnormal CIC changes (P = 0.033. Epithelial changes occurred within 3-6 months of contact lens fitting. CONCLUSION: Severity of cytological changes increased with duration of lens wear (P = 0.00001. Prevalence and severity of cytological alteration is more in symptomatic contact lens wearers. Soft contact lens wearers although asymptomatic showed severe CIC changes.

  17. A Model for Contact Binary Systems

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A model for contact binary systems is presented, which incorporates the following special features: a) The energy exchange between the components is based on the understanding that the energy exchange is due to the release of potential, kinetic and thermal energies of the exchanged mass. b) A special form of mass and angular momentum loss occurring in contact binaries is losses via the outer Lagrangian point. c) The effects of spin, orbital rotation and tidal action on the stellar structure as well as the effect of meridian circulation on the mixing of the chemical elements are considered. d) The model is valid not only for low-mass contact binaries but also for high-mass contact binaries. For illustration, we used the model to trace the evolution of a massive binary system consisting of one 12M⊙ and one 5M⊙ star. The result shows that the start and end of the contact stage fall within the semi-detached phase during which the primary continually transfers mass to the secondary. The time span of the contact stage is short and the mass transfer rate is very large. Therefore, the contact stage can be regarded as a special part of the semi-detached phase with a large mass transfer rate. Both mass loss through the outer Lagrangian point and oscillation between contact and semi-contact states can occur during the contact phase, and the effective temperatures of the primary and the secondary are almost equal.

  18. The scaling of contact rates with population density for the infectious disease models.

    Science.gov (United States)

    Hu, Hao; Nigmatulina, Karima; Eckhoff, Philip

    2013-08-01

    Contact rates and patterns among individuals in a geographic area drive transmission of directly-transmitted pathogens, making it essential to understand and estimate contacts for simulation of disease dynamics. Under the uniform mixing assumption, one of two mechanisms is typically used to describe the relation between contact rate and population density: density-dependent or frequency-dependent. Based on existing evidence of population threshold and human mobility patterns, we formulated a spatial contact model to describe the appropriate form of transmission with initial growth at low density and saturation at higher density. We show that the two mechanisms are extreme cases that do not capture real population movement across all scales. Empirical data of human and wildlife diseases indicate that a nonlinear function may work better when looking at the full spectrum of densities. This estimation can be applied to large areas with population mixing in general activities. For crowds with unusually large densities (e.g., transportation terminals, stadiums, or mass gatherings), the lack of organized social contact structure deviates the physical contacts towards a special case of the spatial contact model - the dynamics of kinetic gas molecule collision. In this case, an ideal gas model with van der Waals correction fits well; existing movement observation data and the contact rate between individuals is estimated using kinetic theory. A complete picture of contact rate scaling with population density may help clarify the definition of transmission rates in heterogeneous, large-scale spatial systems.

  19. Impact of scaling on the performance and reliability degradation of metal-contacts in NEMS devices

    KAUST Repository

    Dadgour, Hamed F.

    2011-04-01

    Nano-electro-mechanical switches (NEMS) offer new possibilities for the design of ultra energy-efficient systems; however, thus far, all the fabricated NEMS devices require high supply voltages that limit their applicability for logic designs. Therefore, research is being conducted to lower the operating voltages by scaling down the physical dimensions of these devices. However, the impact of device scaling on the electrical and mechanical properties of metal contacts in NEMS devices has not been thoroughly investigated in the literature. Such a study is essential because metal contacts play a critical role in determining the overall performance and reliability of NEMS. Therefore, the comprehensive analytical study presented in this paper highlights the performance and reliability degradations of such metal contacts caused by scaling. The proposed modeling environment accurately takes into account the impact of roughness of contact surfaces, elastic/plastic deformation of contacting asperities, and various inter-molecular forces between mating surfaces (such as Van der Waals and capillary forces). The modeling results are validated and calibrated using available measurement data. This scaling analysis indicates that the key contact properties of gold contacts (resistance, stiction and wear-out) deteriorate "exponentially" with scaling. Simulation results demonstrate that reliable (stiction-free) operation of very small contact areas (≈ 6nm x 6nm) will be a daunting task due to the existence of strong surface forces. Hence, contact degradation is identified as a major problem to the scaling of NEMS transistors. © 2011 IEEE.

  20. Development of Soft-Sphere Contact Models for Thermal Heat Conduction in Granular Flows

    Energy Technology Data Exchange (ETDEWEB)

    Morris, A. B.; Pannala, S.; Ma, Zhiwen; Hrenya, C. M.

    2016-12-01

    Conductive heat transfer to flowing particles occurs when two particles (or a particle and wall) come into contact. The direct conduction between the two bodies depends on the collision dynamics, namely the size of the contact area and the duration of contact. For soft-sphere discrete-particle simulations, it is computationally expensive to resolve the true collision time because doing so would require a restrictively small numerical time step. To improve the computational speed, it is common to increase the 'softness' of the material to artificially increase the collision time, but doing so affects the heat transfer. In this work, two physically-based correction terms are derived to compensate for the increased contact area and time stemming from artificial particle softening. By including both correction terms, the impact that artificial softening has on the conductive heat transfer is removed, thus enabling simulations at greatly reduced computational times without sacrificing physical accuracy.

  1. Non-contact versus contact-based sensing methodologies for in-home upper arm robotic rehabilitation.

    Science.gov (United States)

    Howard, Ayanna; Brooks, Douglas; Brown, Edward; Gebregiorgis, Adey; Chen, Yu-Ping

    2013-06-01

    In recent years, robot-assisted rehabilitation has gained momentum as a viable means for improving outcomes for therapeutic interventions. Such therapy experiences allow controlled and repeatable trials and quantitative evaluation of mobility metrics. Typically though these robotic devices have been focused on rehabilitation within a clinical setting. In these traditional robot-assisted rehabilitation studies, participants are required to perform goal-directed movements with the robot during a therapy session. This requires physical contact between the participant and the robot to enable precise control of the task, as well as a means to collect relevant performance data. On the other hand, non-contact means of robot interaction can provide a safe methodology for extracting the control data needed for in-home rehabilitation. As such, in this paper we discuss a contact and non-contact based method for upper-arm rehabilitation exercises that enables quantification of upper-arm movements. We evaluate our methodology on upper-arm abduction/adduction movements and discuss the advantages and limitations of each approach as applied to an in-home rehabilitation scenario.

  2. Association between Contact allergy and Psoriasis

    DEFF Research Database (Denmark)

    Bangsgaard, Nannie

    2011-01-01

    6. SUMMERY 6.1 Summery in English Allergic contact dermatitis (ACD) and psoriasis are the two most prevalent skin diseases in the western world. ACD is the clinical manifestation of contact allergy. Contact allergy and psoriasis are both due to inflammatory mechanisms involving the innate...... and adaptive immune system. Psoriasis is conceived to be an autoimmune disease. Recent studies have suggested an inverse relation between contact allergy and autoimmune diseases. The association between contact allergy and psoriasis could reveal mechanistic insights into both inflammatory processes....... The overall aim of this PhD study was to investigate the association between contact allergy and autoimmune disease, with focus on psoriasis. The work was done in three study parts. Part I Epidemiological studies. Part II Sensitization study and Part III Experimental studies. In part I the association between...

  3. Contact dermatitis to a limb prosthesis.

    Science.gov (United States)

    Sood, Apra; Taylor, James S; Billock, John N

    2003-09-01

    PROSTHESIS USERS commonly develop various skin problems on the residual limb, directly under the prosthetic device when the device is in direct contact with the skin. Prolonged occlusion and humidity increase the likelihood of developing contact sensitivity to moisturizing creams, medicaments, and materials in the prosthesis itself.1 Allergic contact dermatitis to various prosthetic design materials is uncommon, and the relevance of positive patch-test results to chemicals present in prostheses may be difficult to establish. Most reports of allergic contact dermatitis to prostheses have been concerned with surgical amputees and not congenital amputees. We report a 5-year-old boy with a transverse partial hemimelia who developed allergic contact dermatitis to an adhesive used in his myoelectric prosthesis. Unlike most prostheses, myoelectric prostheses are worn directly against the skin, for surface electromyography electrode contact.

  4. A thermodynamic model of contact angle hysteresis

    Science.gov (United States)

    Makkonen, Lasse

    2017-08-01

    When a three-phase contact line moves along a solid surface, the contact angle no longer corresponds to the static equilibrium angle but is larger when the liquid is advancing and smaller when the liquid is receding. The difference between the advancing and receding contact angles, i.e., the contact angle hysteresis, is of paramount importance in wetting and capillarity. For example, it determines the magnitude of the external force that is required to make a drop slide on a solid surface. Until now, fundamental origin of the contact angle hysteresis has been controversial. Here, this origin is revealed and a quantitative theory is derived. The theory is corroborated by the available experimental data for a large number of solid-liquid combinations. The theory is applied in modelling the contact angle hysteresis on a textured surface, and these results are also in quantitative agreement with the experimental data.

  5. Contact patterns among high school students

    CERN Document Server

    Fournet, Julie

    2014-01-01

    Face-to-face contacts between individuals contribute to shape social networks and play an important role in determining how infectious diseases can spread within a population. It is thus important to obtain accurate and reliable descriptions of human contact patterns occurring in various day-to-day life contexts. Recent technological advances and the development of wearable sensors able to sense proximity patterns have made it possible to gather data giving access to time-varying contact networks of individuals in specific environments. Here we present and analyze two such data sets describing with high temporal resolution the contact patterns of students in a high school. We define contact matrices describing the contact patterns between students of different classes and show the importance of the class structure. We take advantage of the fact that the two data sets were collected in the same setting during several days in two successive years to perform a longitudinal analysis on two very different timescal...

  6. Technology Transfer: A Contact Sport

    Science.gov (United States)

    Paynter, Nina P.

    1995-01-01

    Technology transfer is a dynamic process, involving dynamic people as the bridge between NASA Langley Research Center and the outside world. This bridge, for nonaerospace applications, is known as the Technology Applications Group. The introduction of new innovations and expertise where they are needed occurs through a 'push' and 'pull' process. A 'push' occurs when a new technology is first developed with high commercial potential and then a company is found to licence or further develop the technology. The 'pull' process occurs through problem statements. A company or group will submit a written statement of what they need and the shortcomings of commercially available technology. The Technology Transfer Team (T3) reviews these problem statements and decides where NASA LaRC can offer assistance. A researcher or group of researchers are then identified who can help solve the problem and they are put in contact with the company. Depending upon the situation in either method, a Space Act Agreement (SAA), or outline of the responsibilities for each party, is developed.

  7. Charmonia in a Contact Interaction

    CERN Document Server

    Bedolla, Marco A; Bashir, Adnan

    2016-01-01

    For the flavour-singlet heavy quark system of charmonia, we compute the masses of the ground state mesons in four different channels: pseudo-scalar ($\\eta_c(1S)$), vector ($J/\\Psi(1S)$), scalar ($\\chi_{c_0}(1P)$) and axial vector ($\\chi_{c_{1}}(1P)$), as well as the weak decay constants of the $\\eta_c(1S)$ and $J/\\Psi(1S)$ and the charge radius of $\\eta_c(1S)$. The framework for this analysis is provided by a symmetry-preserving Schwinger-Dyson equation (SDEs) treatment of a vector$\\times$vector contact interaction (CI). The results found for the meson masses and the weak decay constants, for the spin-spin combinations studied, are in fairly good agreement with experimental data and earlier model calculations based upon Schwinger-Dyson and Bethe-Salpeter equations (BSEs) involving sophisticated interaction kernels. The charge radius of $\\eta_c(1S)$ is consistent with the results from refined SDE studies and lattice Quantum Chromodynamics (QCD).

  8. Negative stiffness in gear contact

    Directory of Open Access Journals (Sweden)

    Půst L.

    2015-12-01

    Full Text Available The tooth contact stiffness is very often included in dynamic mathematical models of gear drives. It is an important value for calculation of torsion eigenfrequencies as well as the dynamic properties of the whole transmission systems. Planetary gear drives have several advantages over simple parallel axis gears, especially due to theirs compact design and great torque-to-weight ratio caused by multiple parallel paths. However, the dimensional or mounting errors can cause that some planets have the tendency to take more load than the others. One of the ways how to improve load sharing is the application of flexible planetary pins or by using a free central wheel. However in such cases, the wheels motion is defined in one rotation coordinate and two translation coordinates — tangential and radial. The reaction force at radial change of axis distance is usually neglected. The focus of this contribution is to derive the stiffness of this radial connection and to analyse the influence of radial stiffness on planetary gear dynamics.

  9. Apparent contact angle and contact angle hysteresis on liquid infused surfaces

    Science.gov (United States)

    Semprebon, Ciro; McHale, Glen; Kusumaatmaja, Halim

    We theoretically investigate the apparent contact angle and contact angle hysteresis of a droplet placed on a liquid infused surface. We show that the apparent contact angle is not uniquely defined by material parameters, but also has a strong dependence on the relative size between the droplet and its surrounding wetting ridge formed by the infusing liquid. We derive a closed form expression for the contact angle in the limit of vanishing wetting ridge, and compute the correction for small but finite ridge, which corresponds to an effective line tension term. We also predict contact angle hysteresis on liquid infused surfaces generated by the pinning of the contact lines by the surface corrugations. Our analytical expressions for both the apparent contact angle and contact angle hysteresis can be interpreted as `weighted sums' between the contact angles of the infusing liquid relative to the droplet and surrounding gas phases, where the weighting coefficients are given by ratios of the fluid surface tensions.

  10. Apparent contact angle and contact angle hysteresis on liquid infused surfaces.

    Science.gov (United States)

    Semprebon, Ciro; McHale, Glen; Kusumaatmaja, Halim

    2016-12-21

    We theoretically investigate the apparent contact angle and contact angle hysteresis of a droplet placed on a liquid infused surface. We show that the apparent contact angle is not uniquely defined by material parameters, but also has a dependence on the relative size between the droplet and its surrounding wetting ridge formed by the infusing liquid. We derive a closed form expression for the contact angle in the limit of vanishing wetting ridge, and compute the correction for small but finite ridge, which corresponds to an effective line tension term. We also predict contact angle hysteresis on liquid infused surfaces generated by the pinning of the contact lines by the surface corrugations. Our analytical expressions for both the apparent contact angle and contact angle hysteresis can be interpreted as 'weighted sums' between the contact angles of the infusing liquid relative to the droplet and surrounding gas phases, where the weighting coefficients are given by ratios of the fluid surface tensions.

  11. From infinitesimal to full contact between rough surfaces: evolution of the contact area

    CERN Document Server

    Yastrebov, Vladislav A; Molinari, Jean-François

    2014-01-01

    We carry out a statistically meaningful study on self-affine rough surfaces in elastic frictionless non-adhesive contact. We study the evolution of the true contact area under increasing squeezing pressure. Rough surfaces are squeezed from zero up to full contact, which enables us to compare the numerical results both with asperity based models at light pressures and with Persson's contact model for the entire range of pressures. Through the contact perimeter we estimate the error bounds inherent to contact area calculation in discrete problems. A large number of roughness realizations enables us to compute reliably the derivative of the contact area with respect to the pressure. In contrast to Persson's model and in agreement with asperity based models, we demonstrate that at light pressures it is a decreasing convex function. The nonlinearity of the contact area evolution, preserved for the entire range of pressures, is especially strong close to infinitesimal contact. This fact makes difficult an accurate ...

  12. Ephemeral penalty functions for contact-impact dynamics

    Science.gov (United States)

    De La Fuente, Horacio M.; Felippa, Carlos A.

    1991-01-01

    The use of penalty functions to treat a class of structural contact-impact problems is investigated, with emphasis on ones in which the impact phenomena are primarily nondestructive in nature and in which only the gross characterization of the response is required. The dynamic equations of motion are integrated by the difference method. The penalty is represented as an ephemeral fictitious nonlinear spring that is inserted on anticipation of contact. The magnitude and variation of the penalty force is determined through energy balancing considerations. The 'bell shape' of the penalty force function for positive gap was found to be satisfactory, as it depends on only two parameters that can be directly assigned the physical meaning of force and distance. The determination of force law parameters by energy balance worked well. The incorporation of restitution coefficients by the area balancing method yielded excellent results, and no substantial modifications are anticipated. Extensional penalty springs are obviously sufficient for the simple examples treated.

  13. Probing contact interactions at high energy lepton colliders

    Energy Technology Data Exchange (ETDEWEB)

    Cheung, K. [Univ. of Texas, Austin, TX (United States); Godfrey, S. [Carleton Univ., Ottawa, Ontario (Canada). Ottawa Carleton Inst. for Physics; Hewett, J.A. [Stanford Linear Accelerator Center, Menlo Park, CA (United States)

    1996-12-01

    Fermion compositeness and other new physics can be signaled by the presence of a strong four-fermion contact interaction. Here the authors present a study of {ell}{ell}qq and {ell}{ell}{ell}{prime}{ell}{prime} contact interactions using the reactions: {ell}{sup +}{ell}{sup {minus}} {r_arrow} {ell}{prime}{sup +} {ell}{prime}{sup {minus}}, b{anti b}, c{anti c} at future e{sup +}e{sup {minus}} linear colliders with {radical}s = 0.5--5 TeV and {mu}{sup +}{mu}{sup {minus}} colliders with {radical}s = 0.5, 4 TeV. They find that very large compositeness scales can be probed at these machines and that the use of polarized beams can unravel their underlying helicity structure.

  14. Synaptic Contacts Enhance Cell-to-Cell Tau Pathology Propagation

    Directory of Open Access Journals (Sweden)

    Sara Calafate

    2015-05-01

    Full Text Available Accumulation of insoluble Tau protein aggregates and stereotypical propagation of Tau pathology through the brain are common hallmarks of tauopathies, including Alzheimer’s disease (AD. Propagation of Tau pathology appears to occur along connected neurons, but whether synaptic contacts between neurons are facilitating propagation has not been demonstrated. Using quantitative in vitro models, we demonstrate that, in parallel to non-synaptic mechanisms, synapses, but not merely the close distance between the cells, enhance the propagation of Tau pathology between acceptor hippocampal neurons and Tau donor cells. Similarly, in an artificial neuronal network using microfluidic devices, synapses and synaptic activity are promoting neuronal Tau pathology propagation in parallel to the non-synaptic mechanisms. Our work indicates that the physical presence of synaptic contacts between neurons facilitate Tau pathology propagation. These findings can have implications for synaptic repair therapies, which may turn out to have adverse effects by promoting propagation of Tau pathology.

  15. Simulations of contact angle induced pearling for sliding drops

    Science.gov (United States)

    McCue, Scott; Mayo, Lisa; Moroney, Timothy

    2015-11-01

    Droplets sliding down an incline can develop a corner or a cusp at their rear, or undergo a pearling transition whereby the tail breaks up into a number of smaller satellite droplets. These phenomena have been of interest since the experimental work of. It appears that the experimental investigation of this problem is limited due to the inherent difficulty of minimising contact angle hysteresis, whereby physical or chemical heterogeneities of the substrate cause pinning and distortion of the droplet. By applying a lubrication model with a disjoining pressure term, we investigate these flows numerically in order to further shed light on how certain conditions (such as contact angle) affect the corner-cusp-pearling transition. We acknowledge support from the ARC Linkage Project LP100200476.

  16. Synaptic Contacts Enhance Cell-to-Cell Tau Pathology Propagation.

    Science.gov (United States)

    Calafate, Sara; Buist, Arjan; Miskiewicz, Katarzyna; Vijayan, Vinoy; Daneels, Guy; de Strooper, Bart; de Wit, Joris; Verstreken, Patrik; Moechars, Diederik

    2015-05-26

    Accumulation of insoluble Tau protein aggregates and stereotypical propagation of Tau pathology through the brain are common hallmarks of tauopathies, including Alzheimer's disease (AD). Propagation of Tau pathology appears to occur along connected neurons, but whether synaptic contacts between neurons are facilitating propagation has not been demonstrated. Using quantitative in vitro models, we demonstrate that, in parallel to non-synaptic mechanisms, synapses, but not merely the close distance between the cells, enhance the propagation of Tau pathology between acceptor hippocampal neurons and Tau donor cells. Similarly, in an artificial neuronal network using microfluidic devices, synapses and synaptic activity are promoting neuronal Tau pathology propagation in parallel to the non-synaptic mechanisms. Our work indicates that the physical presence of synaptic contacts between neurons facilitate Tau pathology propagation. These findings can have implications for synaptic repair therapies, which may turn out to have adverse effects by promoting propagation of Tau pathology.

  17. Treatment of Severe Cold Contact Urticaria with Omalizumab: Case Reports

    Directory of Open Access Journals (Sweden)

    Petra Brodská

    2012-12-01

    Full Text Available We report 2 patients with cold urticaria with different response to treatment with omalizumab (Xolair®. Cold contact urticaria (CCU is a common subtype of physical urticaria. It is characterized by the development of wheal and/or angioedema within minutes after cold contact. Clinical manifestation of CCU can range from mild, localized whealing to life-threatening anaphylactic shock reactions. Omalizumab has been described to be useful in cases of chronic urticaria and may be an interesting option for treatment of CCU. We describe one patient with significant and long-lasting improvement of symptoms and one without any improvement after anti-immunoglobulin E therapy. In our case reports, we want to highlight that there is still a small group of patients without benefit from omalizumab treatment. It is necessary to identify this minor subgroup of patients where omalizumab does not represent an effective treatment possibility.

  18. Prediction of static contact angles on the basis of molecular forces and adsorption data

    Science.gov (United States)

    Diaz, M. Elena; Savage, Michael D.; Cerro, Ramon L.

    2016-08-01

    At a three-phase contact line, a liquid bulk phase is in contact with and coexists with a very thin layer of adsorbed molecules. This adsorbed film in the immediate vicinity of a liquid wedge modifies the balance of forces between the liquid and solid phases such that, when included in the balance of forces, a quantitative relationship emerges between the adsorbed film thickness and the static contact angle. This relationship permits the prediction of static contact angles from molecular forces and equilibrium adsorption data by means of quantities that are physically meaningful and measurable. For n-alkanes on polytetrafluoroethylene, for which there are experimental data available on adsorption and contact angles, our computations show remarkable agreement with the data. The results obtained are an improvement on previously published calculations—particularly for alkanes with a low number of carbon atoms, for which adsorption is significant.

  19. Characteristics of dynamic contact-angle in presence of surface-charge

    CERN Document Server

    Acharya, Palash V; Chakraborty, Suman

    2015-01-01

    We account for the presence of surface charges towards describing variations in the dynamic contact angle of an advancing liquid-gas meniscus. Starting from the thin-film based formalism, we present closed-form analytical expressions relating the dynamic contact-angle with the capillary number (essentially normalized contact-line speed) and other interfacial parameters. Specifically, our analysis presents, within the realm of hydrodynamic paradigm, a connection between the micro- and macro-scale physics at the vicinity of the contact-line region, taking the combined confluence of viscous and capillary forces along with van der Waals and electrostatic interactions. This connection rationalizes the hitherto reported anomalous window of the magnitude of the microscopic length scales required to corroborate experimental data for ionic liquids. Moreover, our analysis shows the possibility of a transition from strong to weak influence of surface charge in a dynamic fashion with contact-line speed along with other e...

  20. Atlas of point contact spectra of electron-phonon interactions in metals

    CERN Document Server

    Khotkevich, A V

    1995-01-01

    The characteristics of electrical contacts have long attracted the attention of researchers since these contacts are used in every electrical and electronic device. Earlier studies generally considered electrical contacts of large dimensions, having regions of current concentration with diameters substantially larger than the characteristic dimensions of the material: the interatomic distance, the mean free path for electrons, the coherence length in the superconducting state, etc. [110]. The development of microelectronics presented to scientists and engineers the task of studying the characteristics of electrical contacts with ultra-small dimensions. Characteristics of point contacts such as mechanical stability under continuous current loads, the magnitudes of electrical fluctuations, inherent sensitivity in radio devices and nonlinear characteristics in connection with electromagnetic radiation can not be understood and altered in the required way without knowledge of the physical processes occurring in c...

  1. Contact allergy to rubber accelerators remains prevalent

    DEFF Research Database (Denmark)

    Schwensen, J F; Menné, T; Johansen, J D

    2016-01-01

    INTRODUCTION: Chemicals used for the manufacturing of rubber are known causes of allergic contact dermatitis on the hands. Recent European studies have suggested a decrease in thiuram contact allergy. Moreover, while an association with hand dermatitis is well established, we have recently observ.......2% (19/54) and 35.4% (17/48) of the cases respectively. CONCLUSION: Contact allergy to rubber accelerators remains prevalent. Clinicians should be aware of the hitherto unexplored clinical association with facial dermatitis....

  2. Multiple application delayed onset contact urticaria

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Maibach, H I

    1984-01-01

    An unusual type of contact urticaria to formalin is described, based on 4 patients and experiments in 14 volunteers. The contact urticaria appeared on healthy skin only following repeated open applications or after a single application on slightly diseased skin. The possible relation...... of this phenomenon for patients claiming textile intolerance is discussed. Further tests are required to reveal the mechanism of this delayed onset contact urticaria to formalin....

  3. Contact angle measurements under thermodynamic equilibrium conditions.

    Science.gov (United States)

    Lages, Carol; Méndez, Eduardo

    2007-08-01

    The precise control of the ambient humidity during contact angle measurements is needed to obtain stable and valid data. For a such purpose, a simple low-cost device was designed, and several modified surfaces relevant to biosensor design were studied. Static contact angle values for these surfaces are lower than advancing contact angles published for ambient conditions, indicating that thermodynamic equilibrium conditions are needed to avoid drop evaporation during the measurements.

  4. Process design for Al backside contacts

    Energy Technology Data Exchange (ETDEWEB)

    Chalfoun, L.L.; Kimerling, L.C. [Massachusetts Inst. of Technology, Cambridge, MA (United States)

    1995-08-01

    It is known that properly alloyed aluminum backside contacts can improve silicon solar cell efficiency. To use this knowledge to fullest advantage, we have studied the gettering process that occurs during contact formation and the microstructure of the contact and backside junction region. With an understanding of the alloying step, optimized fabrication processes can be designed. To study gettering, single crystal silicon wafers were coated with aluminim on both sides and subjected to heat treatments. Results are described.

  5. Improvements To Micro Contact Performance And Reliability

    Science.gov (United States)

    2016-12-22

    Wafer Purpose Masks Process Print Date Wafer ID µ-contacts Anchor/ Bump Anchor & Bump 8/16/2016 Init. Process... Wafer Purpose Masks Process Print Date Wafer ID µ-contacts Anchor/ Bump Anchor & Bump 8/16/2016 Init. Process Step Notes Date Time Process...B _______________ Wafer Purpose Masks Process Print Date Wafer ID µ-contacts Anchor/ Bump Anchor & Bump 8/16/2016 Init. Process

  6. Heuristic Convergence Rate Improvements of the Projected Gauss-Seidel Method for Frictional Contact Problems

    DEFF Research Database (Denmark)

    Poulsen, Morten; Niebe, Sarah Maria; Erleben, Kenny

    2010-01-01

    In interactive physical simulation, contact forces are applied to prevent rigid bodies from penetrating and control slipping between bodies. Accurate contact force determination is a computationally hard problem. Thus, in practice one trades accuracy for performance. The result is visual artifact...... and a minimum map reformulation. The resulting model is called the Projected Gauss–Seidel method. Quantitative research results are presented and can be used as a taxonomy for selecting a suitable heuristic when using the Projected Gauss–Seidel method....

  7. The influence of wafer dimensions on the contact wave velocity in silicon wafer bonding

    DEFF Research Database (Denmark)

    Bengtsson, S.; Ljungberg, Karin; Vedde, Jan

    1996-01-01

    The contact wave velocity in silicon wafer bonding is experimentally found to decrease with wafer thickness and to be only weakly dependent on wafer diameter. Wafers of different thicknesses ranging from 270 to 5000 mu m, were dipped in HF:H2O before bonding to give the surfaces hydrophobic...... stored in the material is increased, and the contact wave velocity is decreased. (C) 1996 American Institute of Physics....

  8. Heuristic convergence rate improvements of the projected Gauss-Seidel method for frictional contact problems

    DEFF Research Database (Denmark)

    Poulsen, Morten; Abel, Sarah Maria Niebe; Erleben, Kenny

    2010-01-01

    In interactive physical simulation, contact forces are applied to prevent rigid bodies from penetrating and control slipping between bodies. Accurate contact force determination is a computationally hard problem. Thus, in practice one trades accuracy for performance. The result is visual artifact...... and a minimum map reformulation. The resulting model is called the Projected Gauss–Seidel method. Quantitative research results are presented and can be used as a taxonomy for selecting a suitable heuristic when using the Projected Gauss–Seidel method....

  9. Human-livestock contacts and their relationship to transmission of zoonotic pathogens, a systematic review of literature

    NARCIS (Netherlands)

    Klous, Gijs; Huss, Anke; Heederik, Dick J J; Coutinho, Roel A.

    2016-01-01

    Background: Micro-organisms transmitted from vertebrate animals - including livestock - to humans account for an estimated 60% of human pathogens. Micro-organisms can be transmitted through inhalation, ingestion, via conjunctiva or physical contact. Close contact with animals is crucial for transmis

  10. 78 FR 47215 - Petition to Amend Animal Welfare Act Regulations To Prohibit Public Contact With Big Cats, Bears...

    Science.gov (United States)

    2013-08-05

    ... Regulations To Prohibit Public Contact With Big Cats, Bears, and Nonhuman Primates AGENCY: Animal and Plant... certain exceptions, from coming into direct or physical contact with big cats, bears, or nonhuman primates... or immature big cats, bears, and nonhuman primates and the separation of such animals from their dams...

  11. 78 FR 63408 - Petition To Amend Animal Welfare Act Regulations To Prohibit Public Contact With Big Cats, Bears...

    Science.gov (United States)

    2013-10-24

    ... Animal Welfare Act Regulations To Prohibit Public Contact With Big Cats, Bears, and Nonhuman Primates... exceptions, from coming into direct or physical contact with big cats, bears, or nonhuman primates of any age... big cats, bears, and nonhuman primates and the separation of such animals from their dams before the...

  12. Allergic contact dermatitis caused by dorzolamide eyedrops

    Directory of Open Access Journals (Sweden)

    Lee SJ

    2015-04-01

    Full Text Available Seung-Jun Lee, Moosang KimDepartment of Ophthalmology, School of Medicine, Kangwon National University, Chuncheon, KoreaAbstract: The side effects of topical dorzolamide hydrochloride, such as conjunctivitis, eyelid edema, and eye lid irritation, are well known. However, allergic contact dermatitis due to dorzolamide is rare, although the product has been commonly used worldwide in patients with glaucoma. To the best of our knowledge, this is the first report of allergic contact dermatitis caused by topical dorzolamide hydrochloride in Korea. Herein we report a case of allergic contact dermatitis due to topical dorzolamide eyedrops.Keywords: allergic contact dermatitis, dorzolamide, side effects

  13. Electrical contacts to individual SWCNTs: A review

    Directory of Open Access Journals (Sweden)

    Wei Liu

    2014-11-01

    Full Text Available Owing to their superior electrical characteristics, nanometer dimensions and definable lengths, single-walled carbon nanotubes (SWCNTs are considered as one of the most promising materials for various types of nanodevices. Additionally, they can be used as either passive or active elements. To be integrated into circuitry or devices, they are typically connected with metal leads to provide electrical contacts. The properties and quality of these electrical contacts are important for the function and performance of SWCNT-based devices. Since carbon nanotubes are quasi-one-dimensional structures, contacts to them are different from those for bulk semiconductors. Additionally, some techniques used in Si-based technology are not compatible with SWCNT-based device fabrication, such as the contact area cleaning technique. In this review, an overview of the investigations of metal–SWCNT contacts is presented, including the principle of charge carrier injection through the metal–SWCNT contacts and experimental achievements. The methods for characterizing the electrical contacts are discussed as well. The parameters which influence the contact properties are summarized, mainly focusing on the contact geometry, metal type and the cleanliness of the SWCNT surface affected by the fabrication processes. Moreover, the challenges for widespread application of CNFETs are additionally discussed.

  14. Eye contact and Cross-cultural Communication

    Institute of Scientific and Technical Information of China (English)

    刘西娟

    2009-01-01

    It is commonly agreed by contemporary schohrs that it is important to understand the role of culture and its characteristics and potential impact on individuals engaged in cross-cultural communication.Nonverbal Communication often reveals basic culture traits.Eye contact,as a mediunq to convey emodon.attitudes and intention.phys an undeniably vital role in communication.The concentration of this paper is to discuss the functions of eye contact in communication,different information conveyed by eve contact on the basis of different cultures and the importance of understanding and respecting the rituals of eye contact in cross-culmral communication.

  15. BISON Contact Improvements CASL FY14 Report

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, B. W. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hales, J. D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gaston, D. R. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Karpeev, D. A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Williamson, R. L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Novascone, S. R. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Perez, D. M. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gardner, R. J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gamble, K. A. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-01

    The BISON code is the foundation for multiple fuel performance modeling efforts, and is currently under heavy development. For a variety of fuel forms, the effects of heat conduction across a gap and mechanical contact between components of a fuel system are very significant. It is thus critical that BISON have robust capabilities for enforcement of thermal and mechanical contact. BISON’s solver robustness has generally been quite good before mechanical contact between the fuel and cladding occurs, but there have been significant challenges obtaining converged solutions once that contact occurs and the solver begins to enforce mechanical contact constraints. During the current year, significant development effort has been focused on the enforcement of mechanical contact to provide improved solution robustness. In addition to this work to improve mechanical contact robustness, an investigation into questionable results attributable to thermal contact has been performed. This investigation found that the order of integration typically used on the surfaces involved in thermal contact was not sufficiently high. To address this problem, a new option was provided to permit the use of a different integration order for surfaces, and new usage recommendations were provided.

  16. On the Classification of Planar Contact Structures

    CERN Document Server

    Arikan, M Firat

    2010-01-01

    In this paper, we focus on contact structures supported by planar open book decompositions. We study right-veering diffeomorphisms to keep track of overtwistedness property of contact structures under some monodromy changes. We also develop some techniques to understand how certain monodromy changes affect the $EH-$invariant of planar contact structures. As an application we give infinitely many examples of overtwisted and tight contact structures supported by open books whose pages are the four-punctured sphere, and also we prove that a certain family is holomorphically fillable using lantern relation.

  17. Nuclear physics

    Energy Technology Data Exchange (ETDEWEB)

    Sang, David (Bishop Luffa Comprehensive School, Chichester (UK))

    1990-01-01

    Nuclear Physics covers the aspects of radioactivity and nuclear physics dealt with in the syllabuses of all the A-level examination boards; in particular, it provides detailed coverage of the Joint Matriculation Board option in nuclear physics. It deals with the discovery of the atomic nucleus, the physics of nuclear processes, and nuclear technology. (author).

  18. Extended release of hyaluronic acid from hydrogel contact lenses for dry eye syndrome.

    Science.gov (United States)

    Maulvi, Furqan A; Soni, Tejal G; Shah, Dinesh O

    2015-01-01

    Current dry eye treatment includes delivering comfort enhancing agents to the eye via eye drops, but low residence time of eye drops leads to low bioavailability. Frequent administration leads to incompliance in patients, so there is a great need for medical device such as contact lenses to treat dry eye. Studies in the past have demonstrated the efficacy of hyaluronic acid (HA) in the treatment of dry eyes using eye drops. In this paper, we present two methods to load HA in hydrogel contact lenses, soaking method and direct entrapment. The contact lenses were characterized by studying their optical and physical properties to determine their suitability as extended wear contact lenses. HA-laden hydrogel contact lenses prepared by soaking method showed release up to 48 h with acceptable physical and optical properties. Hydrogel contact lenses prepared by direct entrapment method showed significant sustained release in comparison to soaking method. HA entrapped in hydrogels resulted in reduction in % transmittance, sodium ion permeability and surface contact angle, while increase in % swelling. The impact on each of these properties was proportional to HA loading. The batch with 200-μg HA loading showed all acceptable values (parameters) for contact lens use. Results of cytotoxicity study indicated the safety of hydrogel contact lenses. In vivo pharmacokinetics studies in rabbit tear fluid showed dramatic increase in HA mean residence time and area under the curve with lenses in comparison to eye drop treatment. The study demonstrates the promising potential of delivering HA through contact lenses for the treatment of dry eye syndrome.

  19. Direct measurement of graphene contact resistivity to pre-deposited metal in buried contact test structure

    KAUST Repository

    Qaisi, Ramy M.

    2013-08-01

    We demonstrate a buried contact based novel test structure for direct contact resistivity measurement of graphene-metal interfaces. We also observe excellent contact resistivity 1 μO-cm2 without any additional surface modification suggesting that the intrinsic Au-graphene contact is sufficient for achieving devices with low contact resistance. The chemical mechanical polishing less test structure and data described herein highlights an ideal methodology for systematic screening and engineering of graphene-metal contact resistivity to enable low power high speed carbon electronics. © 2013 IEEE.

  20. Investigations of the contact bounce behaviors and relative dynamic welding phenomena for electromechanical relay

    Science.gov (United States)

    Ren, Wanbin; He, Yuan; Jin, Jianbing; Man, Sida

    2016-06-01

    Dynamic welding, being the principal mechanism of sticking failure, correlates closely with the contact bounce of electromechanical relay. The typical waveforms of dynamic contact force and contact voltage at making and breaking process are obtained with the use of a new designed test rig. The variations in bounce time, bounce numbers, last bounce duration, and relevant welding force are investigated in the electrical endurance test. It is determined that the welding strength and the welding probability are increased with the reduced stationary force. The degradation physical mechanism is present to better understand the relationship between dynamic welding and operation characteristics of electromechanical relay.