Aircraft Propeller Hub Repair

Energy Technology Data Exchange (ETDEWEB)

Muth, Thomas R [ORNL; Peter, William H [ORNL

2015-02-13

The team performed a literature review, conducted residual stress measurements, performed failure analysis, and demonstrated a solid state additive manufacturing repair technique on samples removed from a scrapped propeller hub. The team evaluated multiple options for hub repair that included existing metal buildup technologies that the Federal Aviation Administration (FAA) has already embraced, such as cold spray, high velocity oxy-fuel deposition (HVOF), and plasma spray. In addition the team helped Piedmont Propulsion Systems, LLC (PPS) evaluate three potential solutions that could be deployed at different stages in the life cycle of aluminum alloy hubs, in addition to the conventional spray coating method for repair. For new hubs, a machining practice to prevent fretting with the steel drive shaft was recommended. For hubs that were refurbished with some material remaining above the minimal material condition (MMC), a silver interface applied by an electromagnetic pulse additive manufacturing method was recommended. For hubs that were at or below the MMC, a solid state additive manufacturing technique using ultrasonic welding (UW) of thin layers of 7075 aluminum to the hub interface was recommended. A cladding demonstration using the UW technique achieved mechanical bonding of the layers showing promise as a viable repair method.

Gas and LNG trading hubs, hub indexation and destination flexibility in East Asia

International Nuclear Information System (INIS)

Shi, Xunpeng; Padinjare Variam, Hari Malamakkavu

2016-01-01

In the East Asian gas markets, issues like gas trading hubs, hub indexed pricing, and destination flexibility are being debated. This paper examines the impact of a change in East Asia's pricing benchmark and contract flexibility on the regional and global gas markets. The paper uses the Nexant World Gas Model, a linear program with global cost minimization as the objective. To our knowledge, this study on hub competition, price benchmark change and contract flexibility improvement in East Asia will be the first in the literature and have real policy relevance. The results show that both price benchmark change and contract flexibility improvements will create an overall benefit for the world and East Asia importers, but the impacts are different among exporters and importers. However, there is no evidence of competition among different benchmark hubs and no evidence that destination restrictions cause the “Asia Premium”. It implies that removal of destination clauses has higher priority than the change to hub indexation for Japan, Korea and Chinese Taipei, but both should be treated equally in China. The study also suggests that East Asian importers should cooperate among themselves and with exporters to facilitate the hub creation and contract changes in East Asia. - Highlights: •Gas trading hubs in Japan and China are not mutually exclusive. •Both price benchmark changes and contract flexibility improvements are beneficial. •The “Asian Premium” is not caused by destination restriction. •Destination flexibility is much more important than hub indexation in East Asia except China. •Hub indexation is as important as destination flexibility in China due to pipeline imports.

Virtual Campus Hub technology

DEFF Research Database (Denmark)

Vercoulen, Frank; Badger, Merete; Monaco, Lucio

This deliverable briefly describes which technological components have been delivered for the Virtual Campus Hub and how they can be used. A detailed discussion of the technical details of the components, how they were realized and how they fit the VCH concept can be found in deliverables D5.......4. Virtual Campus Hub Technology Evaluation Report and D6.7 The Virtual Campus Hub Concept....

How do Usability Professionals Construe Usability?

DEFF Research Database (Denmark)

Hertzum, Morten; Clemmensen, Torkil

2012-01-01

distinguishing it from user experience. On the basis of repertory-grid interviews with 24 Chinese, Danish, and Indian usability professionals we find that they make use of more utilitarian than experiential, i.e. user-experience related, constructs. This indicates that goal-related performance is central......’ constructs, particularly their experiential constructs, go considerably beyond ISO 9241 usability, indicating a discrepancy between this definition of usability and the thinking of the professionals concerned with delivering usability. Finally, usability is construed rather similarly across the three...

Solving Hub Network Problem Using Genetic Algorithm

Directory of Open Access Journals (Sweden)

Mursyid Hasan Basri

2012-01-01

Full Text Available This paper addresses a network problem that described as follows. There are n ports that interact, and p of those will be designated as hubs. All hubs are fully interconnected. Each spoke will be allocated to only one of available hubs. Direct connection between two spokes is allowed only if they are allocated to the same hub. The latter is a distinct characteristic that differs it from pure hub-and-spoke system. In case of pure hub-and-spoke system, direct connection between two spokes is not allowed. The problem is where to locate hub ports and to which hub a spoke should be allocated so that total transportation cost is minimum. In the first model, there are some additional aspects are taken into consideration in order to achieve a better representation of the problem. The first, weekly service should be accomplished. Secondly, various vessel types should be considered. The last, a concept of inter-hub discount factor is introduced. Regarding the last aspect, it represents cost reduction factor at hub ports due to economies of scale. In practice, it is common that the cost rate for inter-hub movement is less than the cost rate for movement between hub and origin/destination. In this first model, inter-hub discount factor is assumed independent with amount of flows on inter-hub links (denoted as flow-independent discount policy. The results indicated that the patterns of enlargement of container ship size, to some degree, are similar with those in Kurokawa study. However, with regard to hub locations, the results have not represented the real practice. In the proposed model, unsatisfactory result on hub locations is addressed. One aspect that could possibly be improved to find better hub locations is inter-hub discount factor. Then inter-hub discount factor is assumed to depend on amount of inter-hub flows (denoted as flow-dependent discount policy. There are two discount functions examined in this paper. Both functions are characterized by

Natural Gas Market Hubs

Data.gov (United States)

Department of Homeland Security — A hub is a physical transfer point for natural gas where several pipelines are connected. A market center is a hub where the operator offers services that facilitate...

Permasalahan P-Hub Median Dengan Lintasan Terpendek

OpenAIRE

Pasaribu, Raja David

2013-01-01

Hub are facilities that serve as sorting, switching, and transhipment in a transportation network. P-hub median problem is a discrete case location allocation problem which all hub is fully connected. In this paper will be intoduced Mixed Integrer Linear Programming (MILP) formulation models of cost for p-hub median problem allocation for uncapacitaced single allocation p-hub median(USApHMP). In this paper also introduced Floyd-Warshall shortest path algorithm to solve p-hub median problems a...

Using the Contextual Hub Analysis Tool (CHAT) in Cytoscape to Identify Contextually Relevant Network Hubs.

Science.gov (United States)

Muetze, Tanja; Lynn, David J

2017-09-13

Highly connected nodes in biological networks are called network hubs. Hubs are topologically important to the structure of the network and have been shown to be preferentially associated with a range of phenotypes of interest. The relative importance of a hub node, however, can change depending on the biological context. Here, we provide a step-by-step protocol for using the Contextual Hub Analysis Tool (CHAT), an application within Cytoscape 3, which enables users to easily construct and visualize a network of interactions from a gene or protein list of interest, integrate contextual information, such as gene or protein expression data, and identify hub nodes that are more highly connected to contextual nodes than expected by chance. © 2017 by John Wiley & Sons, Inc. Copyright © 2017 John Wiley & Sons, Inc.

Contextual Hub Analysis Tool (CHAT): A Cytoscape app for identifying contextually relevant hubs in biological networks.

Science.gov (United States)

Muetze, Tanja; Goenawan, Ivan H; Wiencko, Heather L; Bernal-Llinares, Manuel; Bryan, Kenneth; Lynn, David J

2016-01-01

Highly connected nodes (hubs) in biological networks are topologically important to the structure of the network and have also been shown to be preferentially associated with a range of phenotypes of interest. The relative importance of a hub node, however, can change depending on the biological context. Here, we report a Cytoscape app, the Contextual Hub Analysis Tool (CHAT), which enables users to easily construct and visualize a network of interactions from a gene or protein list of interest, integrate contextual information, such as gene expression or mass spectrometry data, and identify hub nodes that are more highly connected to contextual nodes (e.g. genes or proteins that are differentially expressed) than expected by chance. In a case study, we use CHAT to construct a network of genes that are differentially expressed in Dengue fever, a viral infection. CHAT was used to identify and compare contextual and degree-based hubs in this network. The top 20 degree-based hubs were enriched in pathways related to the cell cycle and cancer, which is likely due to the fact that proteins involved in these processes tend to be highly connected in general. In comparison, the top 20 contextual hubs were enriched in pathways commonly observed in a viral infection including pathways related to the immune response to viral infection. This analysis shows that such contextual hubs are considerably more biologically relevant than degree-based hubs and that analyses which rely on the identification of hubs solely based on their connectivity may be biased towards nodes that are highly connected in general rather than in the specific context of interest. CHAT is available for Cytoscape 3.0+ and can be installed via the Cytoscape App Store ( http://apps.cytoscape.org/apps/chat).

Optimal hub location in pipeline networks

Energy Technology Data Exchange (ETDEWEB)

Dott, D.R.; Wirasinghe, S.C.; Chakma, A. [Univ. of Calgary, Alberta (Canada)

1996-12-31

This paper discusses optimization strategies and techniques for the location of natural gas marketing hubs in the North American gas pipeline network. A hub is a facility at which inbound and outbound network links meet and freight is redirected towards their destinations. Common examples of hubs used in the gas pipeline industry include gas plants, interconnects and market centers. Characteristics of the gas pipeline industry which are relevant to the optimization of transportation costs using hubs are presented. Allocation techniques for solving location-allocation problems are discussed. An outline of the research in process by the authors in the field of optimal gas hub location concludes the paper.

Expected usability is not a valid indicator of experienced usability

Directory of Open Access Journals (Sweden)

Meinald T. Thielsch

2015-09-01

Full Text Available Usability is a core construct of website evaluation and inherently defined as interactive. Yet, when analysing first impressions of websites, expected usability, i.e., before use, is of interest. Here we investigate to what extend ratings of expected usability are related to (a experienced usability, i.e., ratings after use, and (b objective usability measures, i.e., task performance. Furthermore, we try to elucidate how ratings of expected usability are correlated to aesthetic judgments. In an experiment, 57 participants submitted expected usability ratings after the presentation of website screenshots in three viewing-time conditions (50, 500, and 10,000 ms and after an interactive task (experienced usability. Additionally, objective usability measures (task completion and duration and subjective aesthetics evaluations were recorded for each website. The results at both the group and individual level show that expected usability ratings are not significantly related either to experienced usability or objective usability measures. Instead, they are highly correlated with aesthetics ratings. Taken together, our results highlight the need for interaction in empirical website usability testing, even when exploring very early usability impressions. In our study, user ratings of expected usability were no valid proxy neither for objective usability nor for experienced website usability.

LOCATING HUBS IN TRANSPORT NETWORKS: AN ARTIFICIAL INTELLIGENCE APPROACH

OpenAIRE

Dušan Teodorović; Milica Šelmić; Ivana Vukićević

2014-01-01

Hub facilities serve as switching and transshipment points in transportation and communication networks as well as in logistic systems. Hub networks have an influence on flows on the hub-to-hub links and ensure benefit from economies of scale in inter-hub transportation. The key factors for designing a successful hub-and-spoke network are to determine the optimal number of hubs, to properly locate hubs, and to allocate the non-hubs to the hubs. This paper presents the model to determine the l...

Joint Hub Network Development

NARCIS (Netherlands)

Cruijssen, F.C.A.M.; Borm, P.E.M.; Dullaert, W.; Hamers, H.J.M.

2007-01-01

This paper introduces a framework for joint hub network development. Building a joint physical hub for transhipment of goods is expensive and therefore involves considerable risks for the cooperating companies. In a practical setting, it is unlikely that an entire network will be built at once.

Southwest Regional Climate Hub and California Subsidiary Hub assessment of climate change vulnerability and adaptation and mitigation strategies

Science.gov (United States)

Emile Elias; Caiti Steele; Kris Havstad; Kerri Steenwerth; Jeanne Chambers; Helena Deswood; Amber Kerr; Albert Rango; Mark Schwartz; Peter Stine; Rachel Steele

2015-01-01

This report is a joint effort of the Southwest Regional Climate Hub and the California Subsidiary Hub (Sub Hub). The Southwest Regional Climate Hub covers Arizona, California, Hawai‘i and the U.S. affiliated Pacific Islands, Nevada, New Mexico, and Utah and contains vast areas of western rangeland, forests, and high-value specialty crops (Figure 1). The California Sub...

PolarHub: A Global Hub for Polar Data Discovery

Science.gov (United States)

Li, W.

2014-12-01

This paper reports the outcome of a NSF project in developing a large-scale web crawler PolarHub to discover automatically the distributed polar dataset in the format of OGC web services (OWS) in the cyberspace. PolarHub is a machine robot; its goal is to visit as many webpages as possible to find those containing information about polar OWS, extract this information and store it into the backend data repository. This is a very challenging task given huge data volume of webpages on the Web. Three unique features was introduced in PolarHub to make it distinctive from earlier crawler solutions: (1) a multi-task, multi-user, multi-thread support to the crawling tasks; (2) an extensive use of thread pool and Data Access Object (DAO) design patterns to separate persistent data storage and business logic to achieve high extendibility of the crawler tool; (3) a pattern-matching based customizable crawling algorithm to support discovery of multi-type geospatial web services; and (4) a universal and portable client-server communication mechanism combining a server-push and client pull strategies for enhanced asynchronous processing. A series of experiments were conducted to identify the impact of crawling parameters to the overall system performance. The geographical distribution pattern of all PolarHub identified services is also demonstrated. We expect this work to make a major contribution to the field of geospatial information retrieval and geospatial interoperability, to bridge the gap between data provider and data consumer, and to accelerate polar science by enhancing the accessibility and reusability of adequate polar data.

Images of Usability

DEFF Research Database (Denmark)

Hertzum, Morten

2010-01-01

unless confronted with alternative images. This study delineates six images of usability: universal usability, situational usability, perceived usability, hedonic usability, organizational usability, and cultural usability. The different foci of the images provide opportunities for becoming sensitized...... assume different images of usability and a need for supplementary methods addressing the collaborative and long-term aspects of usability. Moreover, the images call for extending the scope of practical usability work to include the effects achieved by users during their use of systems for real work....

Experimental Investigation of a Helicopter Rotor Hub Wake

Science.gov (United States)

Reich, David; Elbing, Brian; Schmitz, Sven

2013-11-01

A scaled model of a notional helicopter rotor hub was tested in the 48'' Garfield Thomas Water Tunnel at the Applied Research Laboratory Penn State. The main objectives of the experiment were to understand the spatial- and temporal content of the unsteady wake downstream of a rotor hub up to a distance corresponding to the empennage. Primary measurements were the total hub drag and velocity measurements at three nominal downstream locations. Various flow structures were identified and linked to geometric features of the hub model. The most prominent structures were two-per-revolution (hub component: scissors) and four-per-revolution (hub component: main hub arms) vortices shed by the hub. Both the two-per-revolution and four-per-revolution structures persisted far downstream of the hub, but the rate of dissipation was greater for the four-per-rev structures. This work provides a dataset for enhanced understanding of the fundamental physics underlying rotor hub flows and serves as validation data for future CFD analyses.

Hub exchange operations in intermodal hub-and spoke networks: A performance comparison of rail-rail exchange facilities

OpenAIRE

Bontekoning, Y.M.

2006-01-01

The implementation of hub-and-spoke networks in intermodal transport is suggested as one of the potential solutions for helping to increase the intermodal market share. Traditionally, trains are shunted at hubs; this is a time-consuming process. Since the early 1990s a new type of intermodal terminal, specifically designed for fast tran-shipment at nodes in hub-and-spoke networks, has been introduced in Europe. These hub terminals could replace this time-consuming shunting. Studies on the new...

Composite hub/metal blade compressor rotor

Science.gov (United States)

Yao, S.

1978-01-01

A low cost compressor rotor was designed and fabricated for a small jet engine. The rotor hub and blade keepers were compression molded with graphite epoxy. Each pair of metallic blades was held in the hub by a keeper. All keepers were locked in the hub with circumferential windings. Feasibility of fabrication was demonstrated in this program.

Data Collection and Management with ENSITE HUB: ENSITE HUB Version 1.0

Science.gov (United States)

2017-08-01

ER D C/ CE RL S R- 17 -1 4 Engineer Site Identification for the Tactical Environment (ENSITE) Data Collection and Management with ENSITE...and Management with ENSITE HUB ENSITE HUB Version 1.0 Juliana M. Wilhoit, Natalie R. Myers, and George W. Calfas Construction Engineering Research...and standardized manner. With such a tool, CB planners (as well as designers, operators, and manag - ers) can rapidly assess possible current and

Experimental Investigation of a Helicopter Rotor Hub Flow

Science.gov (United States)

Reich, David

The rotor hub system is by far the largest contributor to helicopter parasite drag and a barrier to increasing helicopter forward-flight speed and range. Additionally, the hub sheds undesirable vibration- and instability-inducing unsteady flow over the empennage. The challenges associated with rotor hub flows are discussed, including bluff body drag, interactional aerodynamics, and the effect of the turbulent hub wake on the helicopter empennage. This study was conducted in three phases to quantify model-scale rotor hub flows in water tunnels at The Pennsylvania State University Applied research lab. The first phase investigated scaling and component interaction effects on a 1:17 scale rotor hub model in the 12-inch diameter water tunnel. Effects of Reynolds number, advance ratio, and hub geometry configuration on the drag and wake shed from the rotor hub were quantified using load cell measurements and particle-image velocimetry (PIV). The second phase focused on flow visualization and measurement on a rotor hub and rotor hub/pylon geometry in the 12-inch diameter water tunnel. Stereo PIV was conducted in a cross plane downstream of the hub and flow visualization was conducted using oil paint and fluorescent dye. The third phase concentrated on high accuracy load measurement and prediction up to full-scale Reynolds number on a 1:4.25 scale model in the 48-inch diameter water tunnel. Measurements include 6 degree of freedom loads on the hub and two-component laser-Doppler velocimetry in the wake. Finally, results and conclusions are discussed, followed by recommendations for future investigations.

Soft hub for bearingless rotors

Science.gov (United States)

Dixon, Peter G. C.

1991-01-01

Soft hub concepts which allow the direct replacement of articulated rotor systems by bearingless types without any change in controllability or need for reinforcement to the drive shaft and/or transmission/fuselage attachments of the helicopter were studied. Two concepts were analyzed and confirmed for functional and structural feasibility against a design criteria and specifications established for this effort. Both systems are gimballed about a thrust carrying universal elastomeric bearing. One concept includes a set of composite flexures for drive torque transmittal from the shaft to the rotor, and another set (which is changeable) to impart hub tilting stiffness to the rotor system as required to meet the helicopter application. The second concept uses a composite bellows flexure to drive the rotor and to augment the hub stiffness provided by the elastomeric bearing. Each concept was assessed for weight, drag, ROM cost, and number of parts and compared with the production BO-105 hub.

Integration of MSFC Usability Lab with Usability Testing

Science.gov (United States)

Cheng, Yiwei; Richardson, Sally

2010-01-01

As part of the Stage Analysis Branch, human factors engineering plays an important role in relating humans to the systems of hardware and structure designs of the new launch vehicle. While many branches are involved in the technical aspects of creating a launch vehicle, human factors connects humans to the scientific systems with the goal of improving operational performance and safety while reducing operational error and damage to the hardware. Human factors engineers use physical and computerized models to visualize possible areas for improvements to ensure human accessibility to components requiring maintenance and that the necessary maintenance activities can be accomplished with minimal risks to human and hardware. Many methods of testing are used to fulfill this goal, such as physical mockups, computerized visualization, and usability testing. In this analysis, a usability test is conducted to test how usable a website is to users who are and are not familiar with it. The testing is performed using participants and Morae software to record and analyze the results. This analysis will be a preliminary test of the usability lab in preparation for use in new spacecraft programs, NASA Enterprise, or other NASA websites. The usability lab project is divided into two parts: integration of the usability lab and a preliminary test of the usability lab.

Usability Prediction & Ranking of SDLC Models Using Fuzzy Hierarchical Usability Model

Science.gov (United States)

Gupta, Deepak; Ahlawat, Anil K.; Sagar, Kalpna

2017-06-01

Evaluation of software quality is an important aspect for controlling and managing the software. By such evaluation, improvements in software process can be made. The software quality is significantly dependent on software usability. Many researchers have proposed numbers of usability models. Each model considers a set of usability factors but do not cover all the usability aspects. Practical implementation of these models is still missing, as there is a lack of precise definition of usability. Also, it is very difficult to integrate these models into current software engineering practices. In order to overcome these challenges, this paper aims to define the term `usability' using the proposed hierarchical usability model with its detailed taxonomy. The taxonomy considers generic evaluation criteria for identifying the quality components, which brings together factors, attributes and characteristics defined in various HCI and software models. For the first time, the usability model is also implemented to predict more accurate usability values. The proposed system is named as fuzzy hierarchical usability model that can be easily integrated into the current software engineering practices. In order to validate the work, a dataset of six software development life cycle models is created and employed. These models are ranked according to their predicted usability values. This research also focuses on the detailed comparison of proposed model with the existing usability models.

Supervised hub-detection for brain connectivity

DEFF Research Database (Denmark)

Kasenburg, Niklas; Liptrot, Matthew George; Reislev, Nina Linde

2016-01-01

, but can smooth discriminative signals in the population, degrading predictive performance. We present a novel hub-detection optimized for supervised learning that both clusters network nodes based on population level variation in connectivity and also takes the learning problem into account. The found......A structural brain network consists of physical connections between brain regions. Brain network analysis aims to find features associated with a parameter of interest through supervised prediction models such as regression. Unsupervised preprocessing steps like clustering are often applied...... hubs are a low-dimensional representation of the network and are chosen based on predictive performance as features for a linear regression. We apply our method to the problem of finding age-related changes in structural connectivity. We compare our supervised hub-detection (SHD) to an unsupervised hub...

Capacitated Bounded Cardinality Hub Routing Problem: Model and Solution Algorithm

OpenAIRE

Gelareha, Shahin; Monemic, Rahimeh Neamatian; Semetd, Frederic

2017-01-01

In this paper, we address the Bounded Cardinality Hub Location Routing with Route Capacity wherein each hub acts as a transshipment node for one directed route. The number of hubs lies between a minimum and a maximum and the hub-level network is a complete subgraph. The transshipment operations take place at the hub nodes and flow transfer time from a hub-level transporter to a spoke-level vehicle influences spoke- to-hub allocations. We propose a mathematical model and a branch-and-cut algor...

Evaluating Usability

DEFF Research Database (Denmark)

Nørgaard, Mie; Høegh, Rune T.

2008-01-01

Usability evaluation is widely accepted as a valuable activity in software development. However, how results effectively are fed back to developers is still a relatively unexplored area. We argue that usability feedback can be understood as an argument for a series of usability problems......, and that basic concepts from argumentation theory can help us understand how to create persuasive feedback. We revisit two field studies on usability feedback to study if concepts from Toulmin's model for argumentation and Aristotle's modes of persuasion can explain why some feedback formats outperform others....... We recommend that evaluators specifically back up the warrants behind their usability claims, that their arguments use several modes of persuasion, and that they present feedback in browsable amounts not to overwhelm developers with information. For complex and controversial problems, we advise...

Hello World! - Experiencing Usability Methods without Usability Expertise

Science.gov (United States)

Eriksson, Elina; Cajander, Åsa; Gulliksen, Jan

How do you do usability work when no usability expertise is available? What happens in an organization when system developers, with no previous HCI knowledge, after a 3-day course, start applying usability methods, and particularly field studies? In order to answer these questions qualitative data were gathered through participatory observations, a feed back survey, field study documentation and interviews from 47 system developers from a public authority. Our results suggest that field studies enhance the developer’s understanding of the user perspective, and provide a more holistic overview of the use situation, but that some developers were unable to interpret their observations and see solutions to the users’ problems. The field study method was very much appreciated and has now become standard operating procedure within the organization. However, although field studies may be useful, it does not replace the need for usability pro fes sion als, as their knowledge is essential for more complex observations, analysis and for keeping the focus on usability.

Global usability

CERN Document Server

Douglas, Ian

2011-01-01

The concept of usability has become an increasingly important consideration in the design of all kinds of technology. As more products are aimed at global markets and developed through internationally distributed teams, usability design needs to be addressed in global terms. Interest in usability as a design issue and specialist area of research and education has developed steadily in North America and Europe since the 1980's. However, it is only over the last ten years that it has emerged as a global concern. Global Usability provides an introduction to the important issues in globalizing des

THE ROLE OF AUTOMOBILE TRANSPORT IN HUBS SERVICE

Directory of Open Access Journals (Sweden)

Kirill Iurievich Bely

2015-09-01

Full Text Available Article contains approaches to development and functioning of transport-logistic nodes – hubs – in modern conditions. There is hub classification and examples of them on different transport modes. An important component in providing reliability of hub work is automobile transport.

Contextual Hub Analysis Tool (CHAT: A Cytoscape app for identifying contextually relevant hubs in biological networks [version 2; referees: 2 approved

Directory of Open Access Journals (Sweden)

Tanja Muetze

2016-08-01

Full Text Available Highly connected nodes (hubs in biological networks are topologically important to the structure of the network and have also been shown to be preferentially associated with a range of phenotypes of interest. The relative importance of a hub node, however, can change depending on the biological context. Here, we report a Cytoscape app, the Contextual Hub Analysis Tool (CHAT, which enables users to easily construct and visualize a network of interactions from a gene or protein list of interest, integrate contextual information, such as gene expression or mass spectrometry data, and identify hub nodes that are more highly connected to contextual nodes (e.g. genes or proteins that are differentially expressed than expected by chance. In a case study, we use CHAT to construct a network of genes that are differentially expressed in Dengue fever, a viral infection. CHAT was used to identify and compare contextual and degree-based hubs in this network. The top 20 degree-based hubs were enriched in pathways related to the cell cycle and cancer, which is likely due to the fact that proteins involved in these processes tend to be highly connected in general. In comparison, the top 20 contextual hubs were enriched in pathways commonly observed in a viral infection including pathways related to the immune response to viral infection. This analysis shows that such contextual hubs are considerably more biologically relevant than degree-based hubs and that analyses which rely on the identification of hubs solely based on their connectivity may be biased towards nodes that are highly connected in general rather than in the specific context of interest.   Availability: CHAT is available for Cytoscape 3.0+ and can be installed via the Cytoscape App Store (http://apps.cytoscape.org/apps/chat.

Development of Europe's gas hubs: Implications for East Asia

Directory of Open Access Journals (Sweden)

Xunpeng Shi

2016-10-01

Full Text Available Gas trading hubs have been initially developed in the US in 1980s, UK in 1990s, more recently in European in the 2000s and mulled in East Asia now. Due to its freshness and diversification in nationality, governance and culture, the European hub experience can offer valuable lessons for East Asia. This paper seeks to advance understanding of gas hub development in Europe and provide lessons for East Asia. The European experience highlights that market liberalization and transition of gas pricing mechanism are necessary in creating the competitive markets that are needed for functional gas hubs. Political will and regulations further safeguard the competition environment needed for hub development. Natural factors, such as significant domestic production and culture could have a significant impact on the hub development and transition of pricing mechanism. In East Asia, the path to gas trading hubs might be more difficult than in Europe but a growing market creates an opportunity to start new terms with new contracts. Nevertheless, East Asian needs to work hard to development its indigenous gas or LNG trading hubs.

Usability Constructs

DEFF Research Database (Denmark)

Hertzum, Morten; Clemmesen, Torkil; Hornbæk, Kasper Anders Søren

2007-01-01

Whereas research on usability predominantly employs universal definitions of the aspects that comprise usability, people experience their use of information systems through personal constructs. Based on 48 repertory-grid interviews, this study investigates how such personal constructs are affected...... use of constructs traditionally associated with usability (e.g., easy-to-use, intuitive, and liked). Further analysis of the data is ongoing...

Virtual Campus Hub technical evaluation report

DEFF Research Database (Denmark)

Vercoulen, Frank; Badger, Merete; Monaco, Lucio

This report describes and discusses the technical achievements of the Virtual Campus Hub project and formulates a brief agenda for the future.......This report describes and discusses the technical achievements of the Virtual Campus Hub project and formulates a brief agenda for the future....

Multiple-Localization and Hub Proteins

Science.gov (United States)

Ota, Motonori; Gonja, Hideki; Koike, Ryotaro; Fukuchi, Satoshi

2016-01-01

Protein-protein interactions are fundamental for all biological phenomena, and protein-protein interaction networks provide a global view of the interactions. The hub proteins, with many interaction partners, play vital roles in the networks. We investigated the subcellular localizations of proteins in the human network, and found that the ones localized in multiple subcellular compartments, especially the nucleus/cytoplasm proteins (NCP), the cytoplasm/cell membrane proteins (CMP), and the nucleus/cytoplasm/cell membrane proteins (NCMP), tend to be hubs. Examinations of keywords suggested that among NCP, those related to post-translational modifications and transcription functions are the major contributors to the large number of interactions. These types of proteins are characterized by a multi-domain architecture and intrinsic disorder. A survey of the typical hub proteins with prominent numbers of interaction partners in the type revealed that most are either transcription factors or co-regulators involved in signaling pathways. They translocate from the cytoplasm to the nucleus, triggered by the phosphorylation and/or ubiquitination of intrinsically disordered regions. Among CMP and NCMP, the contributors to the numerous interactions are related to either kinase or ubiquitin ligase activity. Many of them reside on the cytoplasmic side of the cell membrane, and act as the upstream regulators of signaling pathways. Overall, these hub proteins function to transfer external signals to the nucleus, through the cell membrane and the cytoplasm. Our analysis suggests that multiple-localization is a crucial concept to characterize groups of hub proteins and their biological functions in cellular information processing. PMID:27285823

USDA Climate Hubs - delivering usable information and tools to farmers, ranchers and forest land managers - Communication insights from the Regions

Science.gov (United States)

Johnson, R.; Steele, R.

2016-12-01

The USDA Climate Hubs were established in 2014 to develop and deliver science-based, region-specific information and technologies, with USDA agencies and partners, to agricultural and natural resource managers to enable climate-informed decision-making. In the two and half years of existence, our regional leads have gained insights into communicating with the agricultural and forestry communities throughout the different regions of the country. Perspectives differ somewhat among regions and sectors. This talk will share those various insights.

Hub location proplems under polyhedral demand uncertainty

OpenAIRE

Meraklı, Merve

2015-01-01

Cataloged from PDF version of thesis. Includes bibliographical references (leaves 69-74). Thesis (M.S.): Bilkent University, Department of Industrial Engineering, İhsan Doğramacı Bilkent University, 2015. Hubs are points of consolidation and transshipment in many-to-many distribution systems that bene t from economies of scale. In hub location problems, the aim is to locate hub facilities such that each pairwise demand is satis ed and the total cost is minimized. The problem...

Competition and coordination in the U.S. airline hub-to-hub markets: An industry pre-merger case study

Directory of Open Access Journals (Sweden)

Prasun Bhattacharjee

2016-04-01

Full Text Available Purpose: This paper investigates the nature of conduct that existed in the U.S. airline hub-to-hub markets prior to the recent merger wave of the legacy carriers. We explore the strategic importance of network carrier hubs in form of “spheres of influence” on airline market conduct. We also simultaneously recognize the overgrowing role played by Low Cost Carriers (LCC over the years by estimating two conduct parameters - one in markets where LCCs directly compete head-to-head with legacy carriers and the other for markets which LCCs do not serve but has presence in the hub airports or adjacent airports comprising the market endpoints. Thus our supply side framework also sheds some light on the issue of perfect contestability in airline industry. Design/methodology/approach: We estimate a structural oligopoly model for differentiated products with competitive interactions using DB1B data for first quarter of 2004. Findings: Our results imply that the nature of competition is more aggressive relative to Bertrand behavior in hub-to-hub markets and that these markets are less than perfectly contestable. Originality/value: This paper adds to the empirical literature of airline competition by enabling estimation of the actual conduct parameter assuming firm price setting behavior in presence of product differentiation. Contrary to existing literature on airline competition, a structural model enables us to systematically separate out effects of demand, cost and strategic factors on observed airline prices.

Numerical study of hub taper angle on podded propeller performance

International Nuclear Information System (INIS)

Islam, M.F.; Veitch, B.; Bose, N.; Liu, P.

2005-01-01

Presently, the majority of podded propulsion systems are of the pulling type, because this type provides better hydrodynamic efficiency than the pushing type. There are several possible explanations for the better overall performance of a puller type podded propulsor. One is related to the difference in hub shape. Puller and pusher propellers have opposite hub taper angles, hence different hub and blade root shape. These differences cause changes in the flow condition and possibly influence the overall performance. The current study focuses on the variation in performance of pusher and puller propellers with the same blade sections, but different hub taper angles. A hyperboloidal low order source doublet steady/unsteady time domain panel method code was modified and used to evaluate effects of hub taper angle on the open water propulsive performance of some fixed pitch screw propellers used in podded propulsion systems. The modified code was first validated against measurements of two model propellers in terms of average propulsive performance and good agreement was found. Major findings include significant effects of hub taper angle on propulsive performance of tapered hub propellers and noticeable effects of hub taper angle on sectional pressure distributions of tapered hub propeller blades. (author)

Developmental Changes in Brain Network Hub Connectivity in Late Adolescence.

Science.gov (United States)

Baker, Simon T E; Lubman, Dan I; Yücel, Murat; Allen, Nicholas B; Whittle, Sarah; Fulcher, Ben D; Zalesky, Andrew; Fornito, Alex

2015-06-17

The human brain undergoes substantial development throughout adolescence and into early adulthood. This maturational process is thought to include the refinement of connectivity between putative connectivity hub regions of the brain, which collectively form a dense core that enhances the functional integration of anatomically distributed, and functionally specialized, neural systems. Here, we used longitudinal diffusion magnetic resonance imaging to characterize changes in connectivity between 80 cortical and subcortical anatomical regions over a 2 year period in 31 adolescents between the ages of 15 and 19 years. Connectome-wide analysis indicated that only a small subset of connections showed evidence of statistically significant developmental change over the study period, with 8% and 6% of connections demonstrating decreased and increased structural connectivity, respectively. Nonetheless, these connections linked 93% and 90% of the 80 regions, respectively, pointing to a selective, yet anatomically distributed pattern of developmental changes that involves most of the brain. Hub regions showed a distinct tendency to be highly connected to each other, indicating robust "rich-club" organization. Moreover, connectivity between hubs was disproportionately influenced by development, such that connectivity between subcortical hubs decreased over time, whereas frontal-subcortical and frontal-parietal hub-hub connectivity increased over time. These findings suggest that late adolescence is characterized by selective, yet significant remodeling of hub-hub connectivity, with the topological organization of hubs shifting emphasis from subcortical hubs in favor of an increasingly prominent role for frontal hub regions. Copyright © 2015 the authors 0270-6474/15/359078-10$15.00/0.

Marketing through Usability.

Science.gov (United States)

Morgan, Eric Lease

1999-01-01

Suggests that one of the best ways to get word-of-mouth marketing of library technology is to provide "usable" products and services. Provides an international standards definition on usability and notes that understanding usability combines an understanding of user needs/wants with an understanding of goals, functions, and limitations…

Flow Structures within a Helicopter Rotor Hub Wake

Science.gov (United States)

Elbing, Brian; Reich, David; Schmitz, Sven

2015-11-01

A scaled model of a notional helicopter rotor hub was tested in the 48'' Garfield Thomas Water Tunnel at the Applied Research Laboratory Penn State. The measurement suite included total hub drag and wake velocity measurements (LDV, PIV, stereo-PIV) at three downstream locations. The main objective was to understand the spatiotemporal evolution of the unsteady wake between the rotor hub and the nominal location of the empennage (tail). Initial analysis of the data revealed prominent two- and four-per-revolution fluid structures linked to geometric hub features persisting into the wake far-field. In addition, a six-per-revolution fluid structure was observed in the far-field, which is unexpected due to the lack of any hub feature with the corresponding symmetry. This suggests a nonlinear interaction is occurring within the wake to generate these structures. This presentation will provide an overview of the experimental data and analysis with particular emphasis on these six-per-revolution structures.

Sample size in usability studies

NARCIS (Netherlands)

Schmettow, Martin

2012-01-01

Usability studies are important for developing usable, enjoyable products, identifying design flaws (usability problems) likely to compromise the user experience. Usability testing is recommended for improving interactive design, but discovery of usability problems depends on the number of users

Logistics hubs: an integration of transport infrastructure

CSIR Research Space (South Africa)

Botha, M

2008-07-01

Full Text Available " that have jumped on the band wagon pushing for logistics hubs to be established in their regions or within their areas of jurisdiction. The feasibility of a logistics hub is dependent on a number of criteria with access to ideally more than two...

Cultural Usability

DEFF Research Database (Denmark)

Shi, Qingxin

2007-01-01

Culture has already played an important role in the global market. It not only affects products, but also impacts on usability evaluation methods. This project aims to examine in the established thinking aloud usability evaluation method (TA UEM), how does the evaluator build a supportive...

The impact of usability reports and user test observations on developers understanding of usability data

DEFF Research Database (Denmark)

Høegh, Rune Thaarup; Nielsen, Christian Monrad; Pedersen, Michael Bach

2006-01-01

of the system. This article presents results from an exploratory study of 2 ways of providing feedback from a usability evaluation: observation of user tests and reading usability reports. A case study and a field experiment were used to explore how observation and usability reports impact developers......' understanding of usability data. The results indicate that observation of user tests facilitated a rich understanding of usability problems and created empathy with the users and their work. The usability report had a strong impact on the developers' understanding of specific usability problems and supported...

Transaction hubs: can tame energy market communications

Energy Technology Data Exchange (ETDEWEB)

Hamilos, C.

2002-07-01

The nature and function of transaction hubs is described in view of their growing usefulness as electric industry deregulation takes hold and with it the urgent requirement for trading partners to exchange information quickly and efficiently. The paper stresses the many difficulties involved in communications between trading partners since each partner operates under a different set of business rules, with the result that there are 'language differences' to overcome, not to mention the sheer volume of data that must be handled. To make it all work, companies turn increasingly to products like communication hubs. They are able to overcome the fact that different companies have different systems, different data formats and different business rules, and are able to help companies to package, transmit, receive and process information. The principal advantage of a hub is that no one has to learn anyone else's interface. Everyone can continue to use their own data format and transaction models. The hub supplies the protocols and processing rules needed to work with any of the partners connected to the hub. In order to achieve the level of efficiency and reliability required in a hub, certain design principles must be satisfied. These are : scalability, facilities for load balancing, availability of standard routine services, ability to recognize a process as consisting of various transactions, and a transaction as belonging to a specific process, ability to allow the user to configure expiration times around the business processes according to market rules, facility to easily configure validation rules, ability to handle exceptions, ability to interoperate with many middle-ware products, and to manage work flow in a manner that is transparent to operating personnel.

Modelagem para localização de hubs no transporte de encomendas expressas Modelling for location hubs in the express cargo transport

Directory of Open Access Journals (Sweden)

Javier Antonio Timaná Alamo

2006-12-01

Full Text Available Na presente pesquisa se propõe um modelo matemático de programação linear com variáveis binárias 0/1, para projetar a configuração de uma rede de distribuição de encomendas expressas, visando minimizar os custos e garantindo um bom nível de serviço. O modelo, que é uma modificação da formulação proposta por O’Kelly, define as posições dos hubs, a alocação deles às demais instalações físicas e a construção de roteiros com apenas uma parada intermediária, o que confere mais agilidade ao atendimento da demanda de transporte de carga. Considera-se a instalação de um único hub maior (Hub Principal, que serve como ponto de transbordo para os fluxos de carga entre as distintas regiões de um território, e um conjunto de terminais regionais (mini-hubs, servindo como ponto de conexão, unicamente, para os fluxos de carga existentes em um determinado raio de cobertura. Foram propostas extensões que incluem uma restrição da capacidade operacional do Hub Principal, para evitar seu congestionamento, e duas diferentes estratégias de induzir o aumento de fluxo de carga manipulado pelos mini-hubs. O modelo proposto e suas extensões foram aplicados ao estudo de um caso real, obtendo-se resultados consistentes e uma redução significativa no custo total da rede de distribuição da empresa analisada.This study proposes a mathematical model of linear programming with binary variables 0/1 to project the configuration of a distribution network for express cargo which aims to minimize costs and guarantee a high level of service. The model, which is a modification of the formulation proposed by O’Kelly, defines the position of the hubs, their allocation regarding the other physical installations, and the building of itineraries with only one intermediate stop, which increases agility in meeting the demand of cargo transport. It assumes the installation of a single, major hub (Main Hub, which serves as the transfer point for

Exploring Multiple Usability Perspectives

DEFF Research Database (Denmark)

Uldall-Espersen, Tobias

2007-01-01

Industrial usability work often fails to produce the expected impact on software products even though significant resources have been used on uncovering problems and suggesting improvements. So, it seems that feedback from industrial usability work lacks persuasiveness, i.e. it fails to convince...... the key stakeholders that actions need to be taken. This study reports from interviews with 26 stakeholders in software development projects. Our data suggests that the interviewees address usability using different perspectives and based on our observations we describe five such perspectives. Further, we...... discuss how applying different usability perspectives might inform the persuasiveness of usability work....

Usability Briefing for hospital design

DEFF Research Database (Denmark)

Fronczek-Munter, Aneta

This PhD thesis is a contribution to an ongoing debate in Denmark about improving the building design processes of complex buildings, especially in relation to the current hospital developments. It provides knowledge about capturing user needs and defines the process model for usability briefing...... and evaluations, can be fed into briefing and design processes. This PhD thesis proposes methods for usability briefing.Usability is a concept similar to functionality, but usability depends on: subjective view of users, context, culture, situation and experience. Understanding usability is achieved by involving...... users. This PhD thesis extends the research in usability of buildings to include all building design phases, therefore not only proposes usability evaluations, but also defines usability briefing. Briefing, also called architectural programming, is usually understood as one of the first phases...

An Endosymbiotic Evolutionary Algorithm for the Hub Location-Routing Problem

Directory of Open Access Journals (Sweden)

Ji Ung Sun

2015-01-01

Full Text Available We consider a capacitated hub location-routing problem (HLRP which combines the hub location problem and multihub vehicle routing decisions. The HLRP not only determines the locations of the capacitated p-hubs within a set of potential hubs but also deals with the routes of the vehicles to meet the demands of customers. This problem is formulated as a 0-1 mixed integer programming model with the objective of the minimum total cost including routing cost, fixed hub cost, and fixed vehicle cost. As the HLRP has impractically demanding for the large sized problems, we develop a solution method based on the endosymbiotic evolutionary algorithm (EEA which solves hub location and vehicle routing problem simultaneously. The performance of the proposed algorithm is examined through a comparative study. The experimental results show that the proposed EEA can be a viable solution method for the supply chain network planning.

Learning Graphical Models With Hubs.

Science.gov (United States)

Tan, Kean Ming; London, Palma; Mohan, Karthik; Lee, Su-In; Fazel, Maryam; Witten, Daniela

2014-10-01

We consider the problem of learning a high-dimensional graphical model in which there are a few hub nodes that are densely-connected to many other nodes. Many authors have studied the use of an ℓ 1 penalty in order to learn a sparse graph in the high-dimensional setting. However, the ℓ 1 penalty implicitly assumes that each edge is equally likely and independent of all other edges. We propose a general framework to accommodate more realistic networks with hub nodes, using a convex formulation that involves a row-column overlap norm penalty. We apply this general framework to three widely-used probabilistic graphical models: the Gaussian graphical model, the covariance graph model, and the binary Ising model. An alternating direction method of multipliers algorithm is used to solve the corresponding convex optimization problems. On synthetic data, we demonstrate that our proposed framework outperforms competitors that do not explicitly model hub nodes. We illustrate our proposal on a webpage data set and a gene expression data set.

Lean GHTorrent : GitHub data on demand

NARCIS (Netherlands)

Gousios, G.; Vasilescu, B.N.; Serebrenik, A.; Zaidman, A.

2014-01-01

In recent years, GitHub has become the largest code host in the world, with more than 5M developers collaborating across 10M repositories. Numerous popular open source projects (such as Ruby on Rails, Homebrew, Bootstrap, Django or jQuery) have chosen GitHub as their host and have migrated their

Identification of promising Twin Hub networks : Report of Work Package 1 of the Intermodal rail freight Twin hub Network Northwest Europe - project (final report)

NARCIS (Netherlands)

Kreutzberger, E.D.; Konings, J.W.; Meijer, S.; Witteveen, C.; Meijers, B.M.; Pekin, E.; Macharis, C.; Kiel, J.; Kawabata, Y.; Vos, W.

2014-01-01

This report is the first deliverable of the project Intermodal Rail Freight Twin Hub Network Northwest Europe. We call its subject Twin hub network and the organisational entity to carry out the actions the Twin hub project. The project is funded by INTERREG NWE (programme IVb). Its work started in

Location of Urban Logistic Terminals as Hub Location Problem

Directory of Open Access Journals (Sweden)

Jasmina Pašagić Škrinjar

2012-09-01

Full Text Available In this paper the problems of locating urban logistic terminals are studied as hub location problems that due to a large number of potential nodes in big cities belong to hard non-polynomial problems, the so-called NP-problems. The hub location problems have found wide application in physical planning of transport and telecommunication systems, especially systems of fast delivery, networks of logistic and distribution centres and cargo traffic terminals of the big cities, etc. The paper defines single and multiple allocations and studies the numerical examples. The capacitated single allocation hub location problems have been studied, with the provision of a mathematical model of selecting the location for the hubs on the network. The paper also presents the differences in the possibilities of implementing the exact and heuristic methods to solve the actual location problems of big dimensions i.e. hub problems of the big cities.

Altered cortical hubs in functional brain networks in amyotrophic lateral sclerosis.

Science.gov (United States)

Ma, Xujing; Zhang, Jiuquan; Zhang, Youxue; Chen, Heng; Li, Rong; Wang, Jian; Chen, Huafu

2015-11-01

Cortical hubs are highly connected nodes in functional brain networks that play vital roles in the efficient transfer of information across brain regions. Although altered functional connectivity has been found in amyotrophic lateral sclerosis (ALS), the changing pattern in functional network hubs in ALS remains unknown. In this study, we applied a voxel-wise method to investigate the changing pattern of cortical hubs in ALS. Through resting-state fMRI, we constructed whole-brain voxel-wise functional networks by measuring the temporal correlations of each pair of brain voxels and identified hubs using the graph theory method. Specifically, a functional connectivity strength (FCS) map was derived from the data on 20 patients with ALS and 20 healthy controls. The brain regions with high FCS values were regarded as functional network hubs. Functional hubs were found mainly in the bilateral precuneus, parietal cortex, medial prefrontal cortex, and in several visual regions and temporal areas in both groups. Within the hub regions, the ALS patients exhibited higher FCS in the prefrontal cortex compared with the healthy controls. The FCS value in the significantly abnormal hub regions was correlated with clinical variables. Results indicated the presence of altered cortical hubs in the ALS patients and could therefore shed light on the pathophysiology mechanisms underlying ALS.

Report on survey on international hub

International Nuclear Information System (INIS)

Ebisawa, Hirobumi; Hoshino, Junko; Hashimoto, Kazuichiro; Okada, Sohei

2011-06-01

Japan Atomic Energy Agency (JAEA) is promoting initiative to form an international hub in line with its aim to accept more researchers/engineers from all over the world. Establishment of 'the Committee for JAEA Internationalization Initiative' was planned in 2010 so as to intensify this initiative, and in February, 2010, we visited research institutions in Europe, which include European Organization for Nuclear Research (CERN), the construction site of ITER in Cadarache, and Rutherford Appleton Laboratory (RAL), with the intention to survey and learn their advanced activities and systems in regard to the International Hub, so that the committee will be able to make fruitful discussion. This report describes strategy taken in each institution for an International Hub, and the state of each institution regarding acceptance and management of overseas researchers and engineers, research environment, living environment/health and welfare, and PR activities/coexistence with the local community. (author)

Commercial versus in-situ usability testing of healthcare information systems: towards "public" usability testing in healthcare organizations.

Science.gov (United States)

Kushniruk, Andre W; Borycki, Elizabeth M; Kannry, Joseph

2013-01-01

The need for improved usability in healthcare IT has been widely recognized. In addition, methods from usability engineering, including usability testing and usability inspection have received greater attention. Many vendors of healthcare software are now employing usability testing methods in the design and development of their products. However, despite this, the usability of healthcare IT is still considered to be problematic and many healthcare organizations that have purchased systems that have been tested at vendor testing sites are still reporting a range of usability and safety issues. In this paper we explore the distinction between commercial usability testing (conducted at centralized vendor usability laboratories and limited beta test sites) and usability testing that is carried out locally within healthcare organizations that have purchased vendor systems and products (i.e. public "in-situ" usability testing). In this paper it will be argued that both types of testing (i.e. commercial vendor-based testing) and in-situ testing are needed to ensure system usability and safety.

Usability testing for dummies

CERN Multimedia

CERN. Geneva

2017-01-01

Usability testing seems complicated and time-consuming. Is it though? In fact, it is the best way to understand how real users experience your product. In this interactive session, we will do a live usability test and you will get advice on how to conduct your own usability tests.

Working together to improve usability

DEFF Research Database (Denmark)

Nørgaard, Mie; Hornbæk, Kasper

2010-01-01

In theory, usability work is an important and well-integrated activity in developing software. In practice, collaboration on improving usability is ridden with challenges relating to conflicting professional goals, tight project schedules, and unclear usability findings. The authors study those...... challenges through 16 interviews with software developers, usability experts, and project managers. Four themes that are key challenges to successful interaction between stakeholders are identified: poor timing when delivering usability results, results lacking relevance, little respect for other disciplines...

Numerical investigation of hub clearance flow in a Kaplan turbine

Science.gov (United States)

Wu, H.; Feng, J. J.; Wu, G. K.; Luo, X. Q.

2012-11-01

In this paper, the flow field considering the hub clearance flow in a Kaplan turbine has been investigated through using the commercial CFD code ANSYS CFX based on high-quality structured grids generated by ANSYS ICEM CFD. The turbulence is simulated by k-ω based shear stress transport (SST) turbulence model together with automatic near wall treatments. Four kinds of simulations have been conducted for the runner geometry without hub clearance, with only the hub front clearance, with only the rear hub clearance, and with both front and rear clearance. The analysis of the obtained results is focused on the flow structure of the hub clearance flow, the effect on the turbine performance including hydraulic efficiency and cavitation performance, which can improve the understanding on the flow field in a Kaplan turbine.

Numerical investigation of hub clearance flow in a Kaplan turbine

International Nuclear Information System (INIS)

Wu, H; Feng, J J; Wu, G K; Luo, X Q

2012-01-01

In this paper, the flow field considering the hub clearance flow in a Kaplan turbine has been investigated through using the commercial CFD code ANSYS CFX based on high-quality structured grids generated by ANSYS ICEM CFD. The turbulence is simulated by k-ω based shear stress transport (SST) turbulence model together with automatic near wall treatments. Four kinds of simulations have been conducted for the runner geometry without hub clearance, with only the hub front clearance, with only the rear hub clearance, and with both front and rear clearance. The analysis of the obtained results is focused on the flow structure of the hub clearance flow, the effect on the turbine performance including hydraulic efficiency and cavitation performance, which can improve the understanding on the flow field in a Kaplan turbine.

A versatile framework for cooperative hub network development

NARCIS (Netherlands)

Cruijssen, F.C.A.M.; Borm, P.; Dullaert, W.; Hamers, H.

2010-01-01

This paper introduces a framework for cooperative hub network development. Building a joint physical hub for the transshipment of goods is expensive and, therefore, involves considerable risks for cooperating companies. In a practical setting, it is unlikely that an entire network will be built at

A versatile framework for cooperative hub network development

NARCIS (Netherlands)

Cruijssen, Frans; Borm, Peter; Dullaert, Wout; Hamers, Herbert

This paper introduces a framework for cooperative hub network development. Building a joint physical hub for the transshipment of goods is expensive and, therefore, involves considerable risks for cooperating companies. In a practical setting, it is unlikely that an entire network will be built at

Navigating the high seas of Federal Programs to ensure usable science delivery

Science.gov (United States)

Bachelet, D. M.; Gough, M.; Baker, B.; Sheehan, T.; Mutch, T.; Brown, M.

2016-12-01

Conservation Biology Institute (CBI) has been developing web applications to serve credible and usable information that allows land stewards, as well as the general public, to better understand the challenges posed by on-going environmental change. Working with 18 Landscape Conservation Cooperatives (LCCs), CBI has developed Conservation Atlases that allow users to visualize regional spatial data. Some include specific tools such as the Conservation Blueprint in the South Atlantic LCC conservation atlas which is a living spatial plan that identifies priority areas for shared conservation action based on ecosystem indicator condition and connectivity. More than 400 people from over 100 different organizations have actively participated in its development so far. CBI worked closely with 4 LCCs to design a Landscape Climate Dashboard (http://bit.ly/2atu8Df) that provides CMIP5 climate projections averaged over federally and tribally protected lands in the western US. With support from BLM and Great Basin LCC, a Sagebrush Climate Console provides managers short-term NOAA forecasts, CMIP5 climate projections, regional intactness and site sensitivity over sagebrush extent and grouse range. The USDA Pacific Northwest Climate Hub and the US Forest Service are currently funding a collaborative effort between CBI programmers, USFS and Oregon State University forest geneticists to develop a seedlot source tool for the conterminous US and Alaska. This tool has inspired Great Basin sagebrush restoration scientists who have collected information on seed provenance and will hopefully soon collaborate to help develop the first seed source tool for sagebrush managers. Furthermore, with support from USDA Northwest Climate Hub, CBI's Data Basin site (http://bit.ly/2aLRlhZ) is providing downscaled CMIP5 climate projections and impacts from a Climate Science Center and NOAA Regional Integrated Science Assessment funded project that was the result of a collaborative effort between

International Education Hubs: Collaboration for Competitiveness and Sustainability

Science.gov (United States)

Knight, Jane

2014-01-01

This chapter focuses on the development of education hubs, a recent phenomenon in international higher education. Three models of hubs are examined in relation to the forces, risks, and opportunities of globalization and how local and international collaborations are essential for both global competitiveness and sustainability.

Development of an improved low profile hub seal refurbishment tool

International Nuclear Information System (INIS)

Wagg, L.

1997-01-01

The hub seal area of a fuel channel feeder coupling can be exposed to oxygen in the atmosphere if protective measures are not taken during maintenance outages. Exposure to oxygen can lead to pitting of the hub seal area. Although this is a rare occurrence, the resulting possibility of the feeder coupling leakage led to the development of a feeder hub refurbishment tool. To reduce time and man-rem exposure during feeder hub seal refurbishment, an improved low profile hub seat refurbishing tool has been developed. The improved tool design will allow for quick and controlled removal of material, and the restoration of a roll-burnished finish equivalent to the original requirements. The new tool can be used in maintenance operations, with the end fitting present, as well as under retube-type circumstances, with the end fitting removed. (author)

Distributed usability evaluation

DEFF Research Database (Denmark)

Christensen, Lars; Frøkjær, Erik

2010-01-01

We present DUE (Distributed Usability Evaluation), a technique for collecting and evaluating usability data. The DUE infrastructure involves a client-server network. A client-based tool resides on the workstation of each user, providing a screen video recording, microphone input of voice commentary......, and a window for a severity rating. The idea is for the user to work naturalistically, clicking a button when a usability problem or point of uncertainty is encountered, to describe it verbally along with illustrating it on screen, and to rate its severity. These incidents are accumulated on a server......, providing access to an evaluator (usability expert) and to product developers or managers who want to review the incidents and analyse them. DUE supports evaluation in the development stages from running prototypes and onwards. A case study of the use of DUE in a corporate environment is presented...

From Usability Engineering to Evidence-based Usability in Health IT

NARCIS (Netherlands)

Marcilly, Romaric; Peute, Linda; Beuscart-Zephir, Marie-Catherine

2016-01-01

Usability is a critical factor in the acceptance, safe use, and success of health IT. The User-Centred Design process is widely promoted to improve usability. However, this traditional case by case approach that is rooted in the sound understanding of users' needs is not sufficient to improve

Integrated technology rotor/flight research rotor hub concept definition

Science.gov (United States)

Dixon, P. G. C.

1983-01-01

Two variations of the helicopter bearingless main rotor hub concept are proposed as bases for further development in the preliminary design phase of the Integrated Technology Rotor/Flight Research Rotor (ITR/FRR) program. This selection was the result of an evaluation of three bearingless hub concepts and two articulated hub concepts with elastomeric bearings. The characteristics of each concept were evaluated by means of simplified methodology. These characteristics included the assessment of stability, vulnerability, weight, drag, cost, stiffness, fatigue life, maintainability, and reliability.

E-hubs: the new B2B (business-to-business) marketplaces.

Science.gov (United States)

Kaplan, S; Sawhney, M

2000-01-01

Electronic hubs--Internet-based intermediaries that host electronic marketplaces and mediate transactions among businesses--are generating a lot of interest. Companies like Ariba, Chemdex, and Commerce One have already attained breathtaking stock market capitalizations. Venture capitalists are pouring money into more business-to-business start-ups. Even industrial stalwarts like GM and Ford are making plans to set up their own Web markets. As new entrants with new business models pour into the business-to-business space, it's increasingly difficult to make sense of the landscape. This article provides a blueprint of the e-hub arena. The authors start by looking at the two dimensions of purchasing: what businesses buy--manufacturing inputs or operating inputs--and how they buy--through systematic sourcing or spot sourcing. They classify B2B e-hubs into four categories: MRO hubs, yield managers, exchanges, and catalog hubs, and they discuss each type in detail. Drilling deeper into this B2B matrix, the authors look at how e-hubs create value--through aggregation and matching--and explain when each mechanism works best. They also examine the biases of e-hubs. Although many e-hubs are neutral--they're operated by independent third parties--some favor the buyers or sellers. The authors explain the differences and discuss the pros and cons of each position. The B2B marketplace is changing rapidly. This framework helps buyers, sellers, and market makers navigate the landscape by explaining what the different hubs do and how they add the most value.

Personal Usability Constructs

DEFF Research Database (Denmark)

Hertzum, Morten; Clemmensen, Torkil; Hornbæk, Kasper

2011-01-01

Whereas the concept of usability is predominantly defined analytically, people relate to systems through personal usability constructs. Based on 48 repertory-grid interviews, this study investigates how such personal constructs are affected by two factors crucial to the international development...

Cross cultural usability testing

DEFF Research Database (Denmark)

Clemmensen, Torkil; Goyal, Shivam

2005-01-01

In this paper, we present the results of a pilot study in Denmark of cross cultural effects on Think Aloud usability testing. We provide an overview of previous research on cross cultural usability evaluation with a special focus on the relationship between the evaluator and the test user....... This relation was studied in an experiment with usability testing of a localized clipart application in which eight participants from Denmark and India formed pairs of evaluator-test user. The test users were asked to think aloud and the evaluators' role were to facilitate the test users thinking aloud...... and hereby identify usability problems with the clipart application. Data on the evaluators' and test users' behaviour were recorded and analyzed by coding and summarizing statistics on these behavioural events. The results show that Think Aloud Usability Test of a localized application is most effectively...

Empirical usability testing in a component-based environment : improving test efficiency with component-specific usability measures

NARCIS (Netherlands)

Brinkman, W.P.; Haakma, R.; Bouwhuis, D.G.; Bastide, R.; Palanque, P.; Roth, J.

2005-01-01

This paper addresses the issue of usability testing in a component-based software engineering environment, specifically measuring the usability of different versions of a component in a more powerful manner than other, more holistic, usability methods. Three component-specific usability measures are

Sci-Hub provides access to nearly all scholarly literature.

Science.gov (United States)

Himmelstein, Daniel S; Romero, Ariel Rodriguez; Levernier, Jacob G; Munro, Thomas Anthony; McLaughlin, Stephen Reid; Greshake Tzovaras, Bastian; Greene, Casey S

2018-03-01

The website Sci-Hub enables users to download PDF versions of scholarly articles, including many articles that are paywalled at their journal's site. Sci-Hub has grown rapidly since its creation in 2011, but the extent of its coverage has been unclear. Here we report that, as of March 2017, Sci-Hub's database contains 68.9% of the 81.6 million scholarly articles registered with Crossref and 85.1% of articles published in toll access journals. We find that coverage varies by discipline and publisher, and that Sci-Hub preferentially covers popular, paywalled content. For toll access articles, we find that Sci-Hub provides greater coverage than the University of Pennsylvania, a major research university in the United States. Green open access to toll access articles via licit services, on the other hand, remains quite limited. Our interactive browser at https://greenelab.github.io/scihub allows users to explore these findings in more detail. For the first time, nearly all scholarly literature is available gratis to anyone with an Internet connection, suggesting the toll access business model may become unsustainable. © 2018, Himmelstein et al.

Towards Usable E-Health. A Systematic Review of Usability Questionnaires.

Science.gov (United States)

Sousa, Vanessa E C; Dunn Lopez, Karen

2017-05-10

The use of e-health can lead to several positive outcomes. However, the potential for e-health to improve healthcare is partially dependent on its ease of use. In order to determine the usability for any technology, rigorously developed and appropriate measures must be chosen. To identify psychometrically tested questionnaires that measure usability of e-health tools, and to appraise their generalizability, attributes coverage, and quality. We conducted a systematic review of studies that measured usability of e-health tools using four databases (Scopus, PubMed, CINAHL, and HAPI). Non-primary research, studies that did not report measures, studies with children or people with cognitive limitations, and studies about assistive devices or medical equipment were systematically excluded. Two authors independently extracted information including: questionnaire name, number of questions, scoring method, item generation, and psychometrics using a data extraction tool with pre-established categories and a quality appraisal scoring table. Using a broad search strategy, 5,558 potentially relevant papers were identified. After removing duplicates and applying exclusion criteria, 35 articles remained that used 15 unique questionnaires. From the 15 questionnaires, only 5 were general enough to be used across studies. Usability attributes covered by the questionnaires were: learnability (15), efficiency (12), and satisfaction (11). Memorability (1) was the least covered attribute. Quality appraisal showed that face/content (14) and construct (7) validity were the most frequent types of validity assessed. All questionnaires reported reliability measurement. Some questionnaires scored low in the quality appraisal for the following reasons: limited validity testing (7), small sample size (3), no reporting of user centeredness (9) or feasibility estimates of time, effort, and expense (7). Existing questionnaires provide a foundation for research on e-health usability. However

Liner Shipping Hub Network Design in a Competitive Environment

DEFF Research Database (Denmark)

Gelareh, Shahin; Nickel, Stefan; Pisinger, David

A new mixed integer programming formulation is proposed for hub-and-spoke network design in a competitive environment. It addresses competition between a newcomer liner service provider and an alliance, both operating on hub-and-spoke networks. The newcomer company maximizes its market share...... — proportional to service time and transportation cost —by locating a predefined number of hubs at candidate ports and designing its network. While general-purpose solvers do not solve instances of even small size, an accelerated lagrangian method coupled with a primal heuristic obtains very good bounds. Our...

Multi-Item Distribution Policies with Supply Hub and Lateral Transshipment

OpenAIRE

Zhong Jin-Hong; Jiang Rui-Xuan; Zheng Gui

2015-01-01

Supply Hub is defined as the horizontal coordination among the suppliers while lateral transshipment is a horizontal coordination policy among the retailers. By considering the Supply Hub and lateral transshipment simultaneously, ones can reduce the total cost of the supply chain system and improve the response to customer requirement and the customers’ satisfaction. We investigate the distribution policies for the supply chain which consists of multisuppliers, single Supply Hub, and multidis...

Revisiting date and party hubs: novel approaches to role assignment in protein interaction networks.

Directory of Open Access Journals (Sweden)

Sumeet Agarwal

2010-06-01

Full Text Available The idea of "date" and "party" hubs has been influential in the study of protein-protein interaction networks. Date hubs display low co-expression with their partners, whilst party hubs have high co-expression. It was proposed that party hubs are local coordinators whereas date hubs are global connectors. Here, we show that the reported importance of date hubs to network connectivity can in fact be attributed to a tiny subset of them. Crucially, these few, extremely central, hubs do not display particularly low expression correlation, undermining the idea of a link between this quantity and hub function. The date/party distinction was originally motivated by an approximately bimodal distribution of hub co-expression; we show that this feature is not always robust to methodological changes. Additionally, topological properties of hubs do not in general correlate with co-expression. However, we find significant correlations between interaction centrality and the functional similarity of the interacting proteins. We suggest that thinking in terms of a date/party dichotomy for hubs in protein interaction networks is not meaningful, and it might be more useful to conceive of roles for protein-protein interactions rather than for individual proteins.

Usability at the CELSTEC Medialab

NARCIS (Netherlands)

Storm, Jeroen; Kostons, Danny

2009-01-01

Storm, J., & Kostons, D. (2009). Usability at the CELSTEC MediaLab. Presentation about the usability testing, usability research and User Centered Design conducted at the CELSTEC MediaLab. July, 7, 2009, Heerlen, The Netherlands: Open University of the Netherlands.

Usability testing a practical guide for librarians

CERN Document Server

Blakiston, Rebecca

2014-01-01

Do you want to improve the usability of your library website, but feel that it is too difficult, time-consuming, or expensive? Usability Testing: A Practical Guide for Librarians will teach you how to make the case for usability testing, define your audience and their goals, select a usability testing method appropriate for your particular context, plan for an in-house usability test, conduct an effective in-house usability test, analyze usability test results, and create and implement a plan for ongoing, systematic usability testing. Step-by-step instructions, along with a myriad of examples,

Classification of gene expression data: A hubness-aware semi-supervised approach.

Science.gov (United States)

Buza, Krisztian

2016-04-01

Classification of gene expression data is the common denominator of various biomedical recognition tasks. However, obtaining class labels for large training samples may be difficult or even impossible in many cases. Therefore, semi-supervised classification techniques are required as semi-supervised classifiers take advantage of unlabeled data. Gene expression data is high-dimensional which gives rise to the phenomena known under the umbrella of the curse of dimensionality, one of its recently explored aspects being the presence of hubs or hubness for short. Therefore, hubness-aware classifiers have been developed recently, such as Naive Hubness-Bayesian k-Nearest Neighbor (NHBNN). In this paper, we propose a semi-supervised extension of NHBNN which follows the self-training schema. As one of the core components of self-training is the certainty score, we propose a new hubness-aware certainty score. We performed experiments on publicly available gene expression data. These experiments show that the proposed classifier outperforms its competitors. We investigated the impact of each of the components (classification algorithm, semi-supervised technique, hubness-aware certainty score) separately and showed that each of these components are relevant to the performance of the proposed approach. Our results imply that our approach may increase classification accuracy and reduce computational costs (i.e., runtime). Based on the promising results presented in the paper, we envision that hubness-aware techniques will be used in various other biomedical machine learning tasks. In order to accelerate this process, we made an implementation of hubness-aware machine learning techniques publicly available in the PyHubs software package (http://www.biointelligence.hu/pyhubs) implemented in Python, one of the most popular programming languages of data science. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Software architecture analysis of usability

NARCIS (Netherlands)

Folmer, Eelke

2005-01-01

One of the qualities that has received increased attention in recent decades is usability. A software product with poor usability is likely to fail in a highly competitive market; therefore software developing organizations are paying more and more attention to ensuring the usability of their

Liner shipping hub network design in a competitive environment

DEFF Research Database (Denmark)

Gelareh, Shahin; Nickel, Stefan; Pisinger, David

2010-01-01

A mixed integer programming formulation is proposed for hub-and-spoke network design in a competitive environment. It addresses the competition between a newcomer liner service provider and an existing dominating operator, both operating on hub-and-spoke networks. The newcomer company maximizes i...

Flow Merging and Hub Route Optimization in Collaborative Transportation

Directory of Open Access Journals (Sweden)

Kerui Weng

2014-01-01

Full Text Available This paper studies the optimal hub routing problem of merged tasks in collaborative transportation. This problem allows all carriers’ transportation tasks to reach the destinations optionally passing through 0, 1, or 2 hubs within limited distance, while a cost discount on arcs in the hub route could be acquired after paying fixed charges. The problem arises in the application of logistics, postal services, airline transportation, and so forth. We formulate the problem as a mixed-integer programming model, and provide two heuristic approaches, respectively, based on Lagrangian relaxation and Benders decomposition. Computational experiments show that the algorithms work well.

Evaluating Web Usability

Science.gov (United States)

Snider, Jean; Martin, Florence

2012-01-01

Web usability focuses on design elements and processes that make web pages easy to use. A website for college students was evaluated for underutilization. One-on-one testing, focus groups, web analytics, peer university review and marketing focus group and demographic data were utilized to conduct usability evaluation. The results indicated that…

Toward more usable electronic voting: testing the usability of a smartphone voting system.

Science.gov (United States)

Campbell, Bryan A; Tossell, Chad C; Byrne, Michael D; Kortum, Philip

2014-08-01

The goal of this research was to assess the usability of a voting system designed for smart-phones. Smartphones offer remote participation in elections through the use of pervasive technology. Voting on these devices could, among other benefits, increase voter participation while allowing voters to use familiar technology. However, the usability of these systems has not been assessed. A mobile voting system optimized for use on a smartphone was designed and tested against traditional voting platforms for usability. There were no reliable differences between the smartphone-based system and other voting methods in efficiency and perceived usability. More important, though, smartphone owners committed fewer errors on the mobile voting system than on the traditional voting systems. Even with the known limitations of small mobile platforms in both displays and controls, a carefully designed system can provide a usable voting method. Much of the concern about mobile voting is in the area of security; therefore, although these results are promising, security concerns and usability issues arising from mitigating them must be strongly considered. The results of this experiment may help to inform current and future election and public policy officials about the benefits of allowing voters to vote with familiar hardware.

Predicting the binding patterns of hub proteins: a study using yeast protein interaction networks.

Directory of Open Access Journals (Sweden)

Carson M Andorf

Full Text Available Protein-protein interactions are critical to elucidating the role played by individual proteins in important biological pathways. Of particular interest are hub proteins that can interact with large numbers of partners and often play essential roles in cellular control. Depending on the number of binding sites, protein hubs can be classified at a structural level as singlish-interface hubs (SIH with one or two binding sites, or multiple-interface hubs (MIH with three or more binding sites. In terms of kinetics, hub proteins can be classified as date hubs (i.e., interact with different partners at different times or locations or party hubs (i.e., simultaneously interact with multiple partners.Our approach works in 3 phases: Phase I classifies if a protein is likely to bind with another protein. Phase II determines if a protein-binding (PB protein is a hub. Phase III classifies PB proteins as singlish-interface versus multiple-interface hubs and date versus party hubs. At each stage, we use sequence-based predictors trained using several standard machine learning techniques.Our method is able to predict whether a protein is a protein-binding protein with an accuracy of 94% and a correlation coefficient of 0.87; identify hubs from non-hubs with 100% accuracy for 30% of the data; distinguish date hubs/party hubs with 69% accuracy and area under ROC curve of 0.68; and SIH/MIH with 89% accuracy and area under ROC curve of 0.84. Because our method is based on sequence information alone, it can be used even in settings where reliable protein-protein interaction data or structures of protein-protein complexes are unavailable to obtain useful insights into the functional and evolutionary characteristics of proteins and their interactions.We provide a web server for our three-phase approach: http://hybsvm.gdcb.iastate.edu.

Climate programs update: USDA Southwest Regional Climate Hub update

Science.gov (United States)

PROGRAM OVERVIEW: The overarching goal of the USDA SW Climate Hub is to assist farmers, ranchers and foresters in addressing the effects of climate change including prolonged drought, increased insect outbreaks and severe wildfires. In the first year of operations, the SW Climate Hub (est. Februa...

Hub Status and Indexation of Container Ports

Directory of Open Access Journals (Sweden)

Yong-An Park

2015-06-01

This study develops two sub-indexes of port classification and capacity, and combines cases of these two sub-indexes into various types in order to find a proper port hub index. The paper demonstrates how different types of port hub index are useful measurements for evaluating outputs and inputs of container ports. In a case analysis we show that the indexes of period variables and lagged variables have more explanatory power with regard to changes of port throughputs and high correlation with inputs.

Rigid-flexible coupling dynamics of three-dimensional hub-beams system

International Nuclear Information System (INIS)

Liu Jinyang; Lu Hao

2007-01-01

In the previous research of the coupling dynamics of a hub-beam system, coupling between the rotational motion of hub and the torsion deformation of beam is not taken into account since the system undergoes planar motion. Due to the small longitudinal deformation, coupling between the rotational motion of hub and the longitudinal deformation of beam is also neglected. In this paper, rigid-flexible coupling dynamics is extended to a hub-beams system with three-dimensional large overall motion. Not only coupling between the large overall motion and the bending deformation, but also coupling between the large overall motion and the torsional deformation are taken into account. In case of temperature increase, the longitudinal deformation caused by the thermal expansion is significant, such that coupling between the large overall motion and the longitudinal deformation is also investigated. Combining the characteristics of the hybrid coordinate formulation and the absolute nodal coordinate formulation, the system generalized coordinates include the relative nodal displacement and the slope of each beam element with respect to the body-fixed frame of the hub, and the variables related to the spatial large overall motion of the hub and beams. Based on precise strain-displacement relation, the geometric stiffening effect is taken into account, and the rigid-flexible coupling dynamic equations are derived using velocity variational principle. Finite element method is employed for discretization. Simulation of a hub-beams system is used to show the coupling effect between the large overall motion and the torsional deformation as well as the longitudinal deformation. Furthermore, conservation of energy in case of free motion is shown to verify the formulation

Responsibilities in the Usability Requirements Elicitation Process

Directory of Open Access Journals (Sweden)

Marianella Aveledo

2008-12-01

Full Text Available Like any other software system quality attribute, usability places requirements on software components. In particular, it has been demonstrated that certain usability features have a direct impact throughout the software process. This paper details an approach that looks at how to deal with certain usability features in the early software development stages. In particular, we consider usability features as functional usability requirements using patterns that have been termed usability patterns to elicit requirements. Additionally, we clearly establish the responsibilities of all the players at the usability requirements elicitation stage.

Fixed-axis electric sail deployment dynamics analysis using hub-mounted momentum control

Science.gov (United States)

Fulton, JoAnna; Schaub, Hanspeter

2018-03-01

The deployment dynamics of a spin stabilized electric sail (E-sail) with a hub-mounted control actuator are investigated. Both radial and tangential deployment mechanisms are considered to take the electric sail from a post-launch stowed configuration to a fully deployed configuration. The tangential configuration assumes the multi-kilometer tethers are wound up on the exterior of the spacecraft hub, similar to yo-yo despinner configurations. The deployment speed is controlled through the hub rate. The radial deployment configuration assumes each tether is on its own spool. Here both the hub and spool rate are control variables. The sensitivity of the deployment behavior to E-sail length, maximum rate and tension parameters is investigated. A constant hub rate deployment is compared to a time varying hub rate that maintains a constant tether tension condition. The deployment time can be reduced by a factor of 2 or more by using a tension controlled deployment configuration.

Nonlinear analysis of the GFRP material wheel hub

Directory of Open Access Journals (Sweden)

Dong Yun-Feng

2015-01-01

Full Text Available In this paper, the current bicycle wheel was replaced by the ones which composed by the wheel hub with Glassfiber Reinforced Plastic (alkali free thin-walled cylinder material, hereinafter referred to as GFRP material and the protective components made up of rubber outer pneumatic pad. With the help of the basic theory of elastic-plastic mechanics, the finite element “Nonlinear buckling” analysis of the wheel was carried out. The results show that the maximum elastic deformation of the wheel hub and the critical value of buckling failure load were restricted by the elasticity under the condition of external loads. Considering with the tensile strength and elastic modulus of the GFRP value of the material, it is demonstrated that the material is feasible to be used for wheel hub.

Impact of Tidal Level Variations on Wave Energy Absorption at Wave Hub

Directory of Open Access Journals (Sweden)

Valeria Castellucci

2016-10-01

Full Text Available The energy absorption of the wave energy converters (WEC characterized by a limited stroke length —like the point absorbers developed at Uppsala University—depends on the sea level variation at the deployment site. In coastal areas characterized by high tidal ranges, the daily energy production of the generators is not optimal. The study presented in this paper quantifies the effects of the changing sea level at the Wave Hub test site, located at the south-west coast of England. This area is strongly affected by tides: the tidal height calculated as the difference between the Mean High Water Spring and the Mean Low Water Spring in 2014 was about 6.6 m. The results are obtained from a hydro-mechanic model that analyzes the behaviour of the point absorber at the Wave Hub, taking into account the sea state occurrence scatter diagram and the tidal time series at the site. It turns out that the impact of the tide decreases the energy absorption by 53%. For this reason, the need for a tidal compensation system to be included in the design of the WEC becomes compelling. The economic advantages are evaluated for different scenarios: the economic analysis proposed within the paper allows an educated guess to be made on the profits. The alternative of extending the stroke length of the WEC is investigated, and the gain in energy absorption is estimated.

Commentary: Usability – A Sensitizing Concept

DEFF Research Database (Denmark)

Hertzum, Morten

2018-01-01

In his article “The Usability Construct: A Dead End?”, Tractinsky (in Human-Computer Interaction) contends that for scientific research on usability to progress, the usability construct should be unbundled and replaced by well-defined constructs. This contention is presented as the conclusion...... that follows naturally from taking a scientist’s viewpoint on usability. Similar calls for definitive concepts – constructs in Tractinsky’s terminology – have been made in other scientific fields with concepts as ambiguous as that of usability. But counterarguments have also been presented....

Analysis in usability evaluations

DEFF Research Database (Denmark)

Følstad, Asbjørn; Lai-Chong Law, Effie; Hornbæk, Kasper

2010-01-01

While the planning and implementation of usability evaluations are well described in the literature, the analysis of the evaluation data is not. We present interviews with 11 usability professionals on how they conduct analysis, describing the resources, collaboration, creation of recommendations......, and prioritization involved. The interviews indicate a lack of structure in the analysis process and suggest activities, such as generating recommendations, that are unsupported by existing methods. We discuss how to better support analysis, and propose four themes for future research on analysis in usability...

Managing effective and efficient hub operations : a study of ground time management

NARCIS (Netherlands)

Yunita, Theresia

2009-01-01

This Logistics Design Project was carried out at KLM Aircraft Services (AS), from February 2008 - April 2009. The project focuses on ideal description of KLM operational controls for daily executions at the hub and within the AS processes. The daily execution at the hub is managed by the Hub Control

Mobile Usability

DEFF Research Database (Denmark)

Aryana, Bijan; Clemmensen, Torkil

2013-01-01

In this article, a country specific comparative mobile usability study is presented, using Iran and Turkey as the two chosen emerging/emergent nation exemplars of smartphone usage and adoption. In a focus group study, three mobile applications were selected by first-time users of smartphones...... personal contacts. The results and analysis establish the existence of country specific issues and concerns, as well as reveal generic usability issues. The article concludes that the source of these issues is most likely due to a combination of certain contextual features endemic to both Iran and Turkey...

Mechanical Design, Analysis, and Testing of a Two-Bladed Wind Turbine Hub

Energy Technology Data Exchange (ETDEWEB)

Cotrell, J.

2002-06-01

Researchers at the National Wind Technology Center (NWTC) in Golden, Colorado, began performing the Unsteady Aerodynamics Experiment in 1993 to better understand the unsteady aerodynamics and structural responses of horizontal-axis wind turbines. The experiment consists of an extensively instrumented, downwind, three-bladed, 20-kilowatt wind turbine. In May 1995, I received a request from the NWTC to design a two-bladed hub for the experiment. For my thesis, I present the results of the mechanical design, analysis, and testing of the hub. The hub I designed is unique because it runs in rigid, teetering, or independent blade-flapping modes. In addition, the design is unusual because it uses two servomotors to pitch the blades independently. These features are used to investigate new load reduction, noise reduction, blade pitch optimization, and yaw control techniques for two-bladed turbines. I used a methodology by G. Phal and W. Bietz to design the hub. The hub meets all the performance specifications except that it achieves only 90% of the specified teeter range. In my thesis, I focus on the analysis and testing of the hub body. I performed solid-mechanics calculations, ran a finite-element analysis simulation, and experimentally investigated the structural integrity of the hub body.

SUN HUB – ENERGY HUB FOR OUTDOOR TABLES

DEFF Research Database (Denmark)

Poulsen, Peter Behrensdorff; Benatto, Gisele Alves dos Reis; Riedel, Nicholas

2017-01-01

connections, providing opportunity to stream music via Bluetooth and play it from a handheld device to the table and lastly to provide LED lighting on the table during the dark hours. 3 prototypes of the system was built and tested at the Roskilde Festival 2017. Electrical logger units were built into the 3...... on festivals where people camps for several days it can be hard to have your portable units charged. In this this work we report a solar powered hub, as an add-on to a table in the urban environment for charging mobile phones and tablets and other handheld devices through USBs, charging laptops through AC...

Multiple Hub Network Choice in the Liberalized European Market

Science.gov (United States)

Berechman, Joseph; deWit, Jaap

1997-01-01

A key question that so far has received relatively little attention in the germane literature is that of the changes at various airports as a result of the EU liberalization policies. That is, presently, most major European airports still benefit from the so-called home-carrier phenomenon where the country's publicly or semi-publicly owned carrier uses the country's main airport as its gateway hub and, consequently, the home-carrier is also the principal user of this airport (in terms of proportion of total aircraft movements, number of passengers transported, connections, slots ownership, etc.). The country's main airport has substantially benefited from these monopoly conditions of airline captivity, strongly determined by the bilateral system of international air transport regulation. Therefore, European major airports were used to operate in essentially different markets, compared to the increasingly competitive markets of their home based carriers. This partly explains relative stability of transport volumes and financial results of European major airports compared to the relatively volatile financial results of most European national airlines. However, the liberalization of European aviation is likely to change this situation. Market access is open now to all community carriers, i.e. carriers with majority ownership and effective control in the hands of EU citizens. Ticket prices are free, governments can only intervene in case of dumping or excessive pricing. A community airline can choose its seat in any of the 15 member states. Licensing procedures are harmonized between member states. In the last few months community carriers have had unrestricted route access within the EU. Most probably this development will be extended to countries inside and outside Europe. Last year the European Commission got the mandate to start negotiations with 10 other European countries. In the meantime the EC has also started negotiations with the USA on so-called soft rights

Work-domain knowledge in usability evaluation

DEFF Research Database (Denmark)

Følstad, Asbjørn; Hornbæk, Kasper

2010-01-01

Usability evaluation helps to determine whether interactive systems support users in their work tasks. However, knowledge about those tasks and, more generally, about the work-domain is difficult to bring to bear on the processes and outcome of usability evaluation. One way to include such work......-domain knowledge might be Cooperative Usability Testing, an evaluation method that consists of (a) interaction phases, similar to classic usability testing, and (b) interpretation phases, where the test participant and the moderator discuss incidents and experiences from the interaction phases. We have studied...... whether such interpretation phases improve the relevance of usability evaluations in the development of work-domain specific systems. The study included two development cases. We conclude that the interpretation phases generate additional insight and redesign suggestions related to observed usability...

Predicting highly-connected hubs in protein interaction networks by QSAR and biological data descriptors

Science.gov (United States)

Hsing, Michael; Byler, Kendall; Cherkasov, Artem

2009-01-01

Hub proteins (those engaged in most physical interactions in a protein interaction network (PIN) have recently gained much research interest due to their essential role in mediating cellular processes and their potential therapeutic value. It is straightforward to identify hubs if the underlying PIN is experimentally determined; however, theoretical hub prediction remains a very challenging task, as physicochemical properties that differentiate hubs from less connected proteins remain mostly uncharacterized. To adequately distinguish hubs from non-hub proteins we have utilized over 1300 protein descriptors, some of which represent QSAR (quantitative structure-activity relationship) parameters, and some reflect sequence-derived characteristics of proteins including domain composition and functional annotations. Those protein descriptors, together with available protein interaction data have been processed by a machine learning method (boosting trees) and resulted in the development of hub classifiers that are capable of predicting highly interacting proteins for four model organisms: Escherichia coli, Saccharomyces cerevisiae, Drosophila melanogaster and Homo sapiens. More importantly, through the analyses of the most relevant protein descriptors, we are able to demonstrate that hub proteins not only share certain common physicochemical and structural characteristics that make them different from non-hub counterparts, but they also exhibit species-specific characteristics that should be taken into account when analyzing different PINs. The developed prediction models can be used for determining highly interacting proteins in the four studied species to assist future proteomics experiments and PIN analyses. Availability The source code and executable program of the hub classifier are available for download at: http://www.cnbi2.ca/hub-analysis/ PMID:20198194

Microfluidic hubs, systems, and methods for interface fluidic modules

Science.gov (United States)

Bartsch, Michael S; Claudnic, Mark R; Kim, Hanyoup; Patel, Kamlesh D; Renzi, Ronald F; Van De Vreugde, James L

2015-01-27

Embodiments of microfluidic hubs and systems are described that may be used to connect fluidic modules. A space between surfaces may be set by fixtures described herein. In some examples a fixture may set substrate-to-substrate spacing based on a distance between registration surfaces on which the respective substrates rest. Fluidic interfaces are described, including examples where fluid conduits (e.g. capillaries) extend into the fixture to the space between surfaces. Droplets of fluid may be introduced to and/or removed from microfluidic hubs described herein, and fluid actuators may be used to move droplets within the space between surfaces. Continuous flow modules may be integrated with the hubs in some examples.

Towards a Usability and Error "Safety Net": A Multi-Phased Multi-Method Approach to Ensuring System Usability and Safety.

Science.gov (United States)

Kushniruk, Andre; Senathirajah, Yalini; Borycki, Elizabeth

2017-01-01

The usability and safety of health information systems have become major issues in the design and implementation of useful healthcare IT. In this paper we describe a multi-phased multi-method approach to integrating usability engineering methods into system testing to ensure both usability and safety of healthcare IT upon widespread deployment. The approach involves usability testing followed by clinical simulation (conducted in-situ) and "near-live" recording of user interactions with systems. At key stages in this process, usability problems are identified and rectified forming a usability and technology-induced error "safety net" that catches different types of usability and safety problems prior to releasing systems widely in healthcare settings.

North West Surrey's locality hubs - delivering integrated care

OpenAIRE

Compton, Lisa; Wilkinson, Peter; Lawn, Liz

2017-01-01

Introduction: North West Surrey CCG (NWSCCG) is establishing Locality Hubs – physical buildings offering a fully integrated GP-led, multi-disciplinary ‘one-stop-shop’ services in the community for a defined cohort of frail elderly patients with multiple core morbidities. Hubs will ultimately deliver proactive and reactive care, available 24 hours a day, 365 days a year.The key drivers are;Ageing population, people living longer & more people living with chronic conditionsCost & demand...

Lowering the barriers for accessing distributed geospatial big data to advance spatial data science: the PolarHub solution

Science.gov (United States)

Li, W.

2017-12-01

Data is the crux of science. The widespread availability of big data today is of particular importance for fostering new forms of geospatial innovation. This paper reports a state-of-the-art solution that addresses a key cyberinfrastructure research problem—providing ready access to big, distributed geospatial data resources on the Web. We first formulate this data-access problem and introduce its indispensable elements, including identifying the cyber-location, space and time coverage, theme, and quality of the dataset. We then propose strategies to tackle each data-access issue and make the data more discoverable and usable for geospatial data users and decision makers. Among these strategies is large-scale web crawling as a key technique to support automatic collection of online geospatial data that are highly distributed, intrinsically heterogeneous, and known to be dynamic. To better understand the content and scientific meanings of the data, methods including space-time filtering, ontology-based thematic classification, and service quality evaluation are incorporated. To serve a broad scientific user community, these techniques are integrated into an operational data crawling system, PolarHub, which is also an important cyberinfrastructure building block to support effective data discovery. A series of experiments were conducted to demonstrate the outstanding performance of the PolarHub system. We expect this work to contribute significantly in building the theoretical and methodological foundation for data-driven geography and the emerging spatial data science.

Usability in Scientific Databases

Directory of Open Access Journals (Sweden)

Ana-Maria Suduc

2012-07-01

Full Text Available Usability, most often defined as the ease of use and acceptability of a system, affects the users' performance and their job satisfaction when working with a machine. Therefore, usability is a very important aspect which must be considered in the process of a system development. The paper presents several numerical data related to the history of the scientific research of the usability of information systems, as it is viewed in the information provided by three important scientific databases, Science Direct, ACM Digital Library and IEEE Xplore Digital Library, at different queries related to this field.

The effects of protoype medium on usability testing.

Science.gov (United States)

Boothe, Chase; Strawderman, Lesley; Hosea, Ethan

2013-11-01

Inconsistencies among testing methods and results in previous research prompted this study that builds upon a systematic usability testing research framework to better understand how interface medium influences users' abilities to detect usability flaws in applications. Interface medium was tested to identify its effects on users' perceptions of usability and abilities to detect usability problems and severe usability problems. Results indicated that medium has no effect on users' abilities to detect usability problems or perceptions of usability. However, results did indicate an interaction between the medium and the tested application in which users were able to identify significantly more usability problems on a higher fidelity medium using a particular application. Results also indicated that as users' perceptions of an application's usability increases, the users are less able to detect usability problems in that application. Usability testing should begin early in the design process, even if low fidelity mediums will be used. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The Usability Expert’s Fear of Agility

DEFF Research Database (Denmark)

Nielsen, Lene; Madsen, Sabine

2012-01-01

This paper contributes to the HCI literature on usability practice with insights about the empirical challenges and global emerging practices caused by the advent of agile software development (ASD). In the paper we report from a worldwide study involving 12 usability professionals from 12...... different countries. The findings show that the usability professionals share a forced development and innovation in their practice that stem from their clients’ adoption and use of ASD methods. The ASD methods challenge the way usability testing is performed, the abilities of the usability expert......, the usability deliverables, and the experts’ assumptions about the importance of validity....

DigitalHub: A Repository Focused on the Future.

Science.gov (United States)

Ilik, Violeta; Hebal, Piotr; Olson, Anton; Wishnetsky, Susan; Pastva, Joelen; Kubilius, Ramune; Shank, Jonathan; Gutzman, Karen; Chung, Margarita; Holmes, Kristi

2018-01-01

The DigitalHub scholarly repository was developed and launched at the Galter Health Sciences Library for the Feinberg School of Medicine and the greater Northwestern Medicine community. The repository was designed to allow scholars the ability to create, share, and preserve a range of citable digital outputs. This article traces the evolution of DigitalHub's development and engagement activities, highlighting project challenges, innovations, success stories, and the team-based approach that was employed to successfully achieve project goals.

Incremental Optimization of Hub and Spoke Network for the Spokes’ Numbers and Flow

Directory of Open Access Journals (Sweden)

Yanfeng Wang

2015-01-01

Full Text Available Hub and spoke network problem is solved as part of a strategic decision making process which may have a profound effect on the future of enterprises. In view of the existing network structure, as time goes on, the number of spokes and the flow change because of different sources of uncertainty. Hence, the incremental optimization of hub and spoke network problem is considered in this paper, and the policy makers should adopt a series of strategies to cope with the change, such as setting up new hubs, adjusting the capacity level of original hubs, or closing some original hubs. The objective is to minimize the total cost, which includes the setup costs for the new hubs, the closure costs, and the adjustment costs for the original hubs as well as the flow routing costs. Two mixed-integer linear programming formulations are proposed and analyzed for this problem. China Deppon Logistics as an example is performed to present computational analysis, and we analyze the changes in the solutions driven by the number of spokes and the flow. The tests also allow an analysis to consider the effect of variation in parameters on network.

Usability Testing Of Web Mapping Portals

Directory of Open Access Journals (Sweden)

Petr Voldán

2011-05-01

Full Text Available This study presents a usability testing as method, which can be used to improve controlling of web map sites. Study refers to the basic principles of this method and describes particular usability tests of mapping sites. In this paper are identified potential usability problems of web sites: Amapy.cz, Google maps and Mapy.cz. The usability testing was focused on problems related with user interfaces, addresses searching and route planning of the map sites.

Software Development and Feedback from Usability Evaluations

DEFF Research Database (Denmark)

Høegh, Rune Thaarup

2008-01-01

This paper presents a study of the strengths and weaknesses of written, multimedia and oral feedback from usability evaluations to developers. The strengths and weaknesses are related to how well the feedback supports the developers in addressing usability problems in a software system. The study...... concludes that using the traditional written usability report, as the only form of feedback from usability evaluations is associated with problems related to the report not supporting the process of addressing the usability problems. The report is criticized for representing an overwhelming amount...... of information, while still not offering the required information to address usability problems. Other forms of feedback, such as oral or multimedia feedback helps the developer in understanding the usability problems better, but are on the other hand less cost-effective than a written description....

The Evaluator Effect in Usability Tests

DEFF Research Database (Denmark)

Jacobsen, Niels Ebbe; Hertzum, Morten; John, Bonnie E.

1998-01-01

Usability tests are applied in industry to evaluate systems and in research as a yardstick for other usability evaluation methods. However, one potential threat to the reliability of usability tests has been left unaddressed: the evaluator effect. In this study, four evaluators analyzed four vide...

Does Usability Matter? An Analysis of the Impact of Usability on Technology Acceptance in ERP Settings

Directory of Open Access Journals (Sweden)

Brenda M Scholtz

2016-11-01

Full Text Available Though the field of management information systems, as a sector and a discipline, is the inventor of many guidelines and models, it appears to be a slow runner on practical implications of interface usability. This usability can influence end users’ attitude and behavior to use IT. The purpose of this paper was to examine the interface usability of a popular Enterprise Resource Planning (ERP software system, SAP, and to identify related issues and implications to the Technology Acceptance Model (TAM. A survey was conducted of 112 SAP ERP users from an organization in the heavy metal industry in Bangladesh. The partial least squares technique was used to analyze the survey data. The survey findings empirically confirmed that interface usability has a significant impact on users’ perceptions of usefulness and ease of use which ultimately affects attitudes and intention to use the ERP software. The research model extends the TAM by incorporating three criteria of interface usability. It is the first known study to investigate usability criteria as an extension of TAM.

Sci-Hub: What Librarians Should Know and Do about Article Piracy.

Science.gov (United States)

Hoy, Matthew B

2017-01-01

The high cost of journal articles has driven many researchers to turn to a new way of getting access: "pirate" article sites. Sci-Hub, the largest and best known of these sites, currently offers instant access to more than 58 million journal articles. Users attracted by the ease of use and breadth of the collection may not realize that these articles are often obtained using stolen credentials and downloading them may be illegal. This article will briefly describe Sci-Hub and how it works, the legal and ethical issues it raises, and the problems it may cause for librarians. Librarians should be aware of Sci-Hub and the ways it may change their patrons' expectations. They should also understand the risks Sci-Hub can pose to their patrons and their institutions.

Zoning Districts - Volusia County HUB Zones

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — Historically Underutilized Business (HUB) Zones in Volusia County. Go to http://www.sba.gov/hubzone or contact the Department of Economic Development (386) 248-8048...

Developer Driven and User Driven Usability Evaluations

DEFF Research Database (Denmark)

Bruun, Anders

2013-01-01

Usability evaluation provide software development teams with insights on the degree to which a software application enables a user to achieve his/her goals, how fast these goals can be achieved, how easy it is to learn and how satisfactory it is in use Although usability evaluations are crucial...... in the process of developing software systems with a high level of usability, its use is still limited in the context of small software development companies. Several approaches have been proposed to support software development practitioners (SWPs) in conducting usability evaluations, and my thesis explores two...... of these: 1) The first approach is to support SWPs by training them to drive usability evaluations. 2) The second approach to support SWPs involves minimalist training of end users to drive usability evaluations. In related work, a set of five quality criteria for usability evaluations is applied...

City Hub : a cloud based IoT platform for Smart Cities

OpenAIRE

Lea, Rodger; Blackstock, Michael

2014-01-01

Cloud based Smart City hubs are an attractive approach to addressing some of the complex issues faced when deploying PaaS infrastructure for Smart Cities. In this paper we introduce the general notion of IoT hubs and then discusses our work to generalize our IoT hub as a Smart City PaaS. Two key issues are identified, support for hybrid public/private cloud and interoperability. We briefly describe our approach to these issues and discuss our experiences deploying two cloud-based Smart City h...

Idea Hubs as Nexus of Collective Creativity in Digital Innovation

DEFF Research Database (Denmark)

Ciriello, Raffaele; Richter, Alexander

2015-01-01

Digital innovation radically transforms the nature of corporate innovation practices, implying a growing need for deeper understanding its origins and outcomes. In this paper, we conceptualize the focal points of social networking in digital innovation as idea hubs. We focus our analysis...... on instances of idea hubs in two multinational European software companies, where we conducted a case study over a two-year period, and collected data in form of interviews, digital documents, and participant observations. In doing so, we identify a set of social networking practices in which idea hubs serve...... of digital artifacts individuals can choose from, offline interaction still plays a major role in facilitating digital innovation....

Connectome hubs at resting state in children and adolescents: Reproducibility and psychopathological correlation

Directory of Open Access Journals (Sweden)

João Ricardo Sato

2016-08-01

Full Text Available Functional brain hubs are key integrative regions in brain networks. Recently, brain hubs identified through resting-state fMRI have emerged as interesting targets to increase understanding of the relationships between large-scale functional networks and psychopathology. However, few studies have directly addressed the replicability and consistency of the hub regions identified and their association with symptoms. Here, we used the eigenvector centrality (EVC measure obtained from graph analysis of two large, independent population-based samples of children and adolescents (7–15 years old; total N = 652; 341 subjects for site 1 and 311 for site 2 to evaluate the replicability of hub identification. Subsequently, we tested the association between replicable hub regions and psychiatric symptoms. We identified a set of hubs consisting of the anterior medial prefrontal cortex and inferior parietal lobule/intraparietal sulcus (IPL/IPS. Moreover, lower EVC values in the right IPS were associated with psychiatric symptoms in both samples. Thus, low centrality of the IPS was a replicable sign of potential vulnerability to mental disorders in children. The identification of critical and replicable hubs in functional cortical networks in children and adolescents can foster understanding of the mechanisms underlying mental disorders.

Preliminary radiation protection tests for the body height and body weight of the Chinese reference man

International Nuclear Information System (INIS)

Shan, Z.Y.; Chang, Z.Y.; Lan, W.Z.; Yin, G.A.; Li, G.F.

1985-01-01

The radiation protection standard recommended by ICRP was evaluated in terms of its suitability for Chinese people. The body height and weight of 100,325 healthy Chinese were measured and anatomical data collected from usable corpses of persons who died by accident or sudden death. The data included the size and weight of certain organs. 18 refs

A Cross-Cultural Study of How Usability Professionals Experience the Usability of Everyday Systems

DEFF Research Database (Denmark)

Jiang, Y.; Sun, X.; Li, H.

2009-01-01

in the study, their understanding of fun systems differs across cultural backgrounds. Also, easy-to-use and useful systems are perceived as being similar or different depending on the usability professional’s cultural background. Most other cross-cultural differences relate to categories of construct......Culture influences many aspects of the design and use of computer systems; understanding better this influence on their own thinking may benefit usability professionals who do cross-cultural usability work. Using Kelly’s notion of personal constructs, we focus on one mediator of culture: how...

Experimental Investigation of Diffuser Hub Injection to Improve Centrifugal Compressor Stability

Science.gov (United States)

Skoch, Gary J.

2004-01-01

Results from a series of experiments to investigate whether centrifugal compressor stability could be improved by injecting air through the diffuser hub surface are reported. The research was conducted in a 4:1 pressure ratio centrifugal compressor configured with a vane-island diffuser. Injector nozzles were located just upstream of the leading edge of the diffuser vanes. Nozzle orientations were set to produce injected streams angled at 8, 0 and +8 degrees relative to the vane mean camber line. Several injection flow rates were tested using both an external air supply and recirculation from the diffuser exit. Compressor flow range did not improve at any injection flow rate that was tested. Compressor flow range did improve slightly at zero injection due to the flow resistance created by injector openings on the hub surface. Leading edge loading and semi-vaneless space diffusion showed trends similar to those reported earlier from shroud surface experiments that did improve compressor flow range. Opposite trends are seen for hub injection cases where compressor flow range decreased. The hub injection data further explain the range improvement provided by shroud-side injection and suggest that different hub-side techniques may produce range improvement in centrifugal compressors.

Usable security history, themes, and challenges

CERN Document Server

Garfinkel, Simson

2014-01-01

There has been roughly 15 years of research into approaches for aligning research in Human Computer Interaction with computer Security, more colloquially known as ``usable security.'' Although usability and security were once thought to be inherently antagonistic, today there is wide consensus that systems that are not usable will inevitably suffer security failures when they are deployed into the real world. Only by simultaneously addressing both usability and security concerns will we be able to build systems that are truly secure. This book presents the historical context of the work to dat

An Intelligent Framework for Website Usability

Directory of Open Access Journals (Sweden)

Alexiei Dingli

2014-01-01

Full Text Available With the major advances of the Internet throughout the past couple of years, websites have come to play a central role in the modern marketing business program. However, simply owning a website is not enough for a business to prosper on the Web. Indeed, it is the level of usability of a website that determines if a user stays or abandons it for another competing one. It is therefore crucial to understand the importance of usability on the web, and consequently the need for its evaluation. Nonetheless, there exist a number of obstacles preventing software organizations from successfully applying sound website usability evaluation strategies in practice. From this point of view automation of the latter is extremely beneficial, which not only assists designers in creating more usable websites, but also enhances the Internet users’ experience on the Web and increases their level of satisfaction. As a means of addressing this problem, an Intelligent Usability Evaluation (IUE tool is proposed that automates the usability evaluation process by employing a Heuristic Evaluation technique in an intelligent manner through the adoption of several research-based AI methods. Experimental results show there exists a high correlation between the tool and human annotators when identifying the considered usability violations.

Managing Product Usability: How companies deal with usability in the development of electronic consumer products

OpenAIRE

Van Kuijk, J.I.

2010-01-01

Problem statement: Even though there is a large amount of methods for user-centred design, the usability of electronic consumer products (e.g., portable music players, washing machines and mobile phones) is under pressure. Usability is the extent to which a product can be used by specified users to achieve specified goals with effectiveness, efficiency and satisfaction in a specified context of use. That the usability of electronic consumer products is under pressure is attributed to an incre...

A Hub Matrix Theory and Applications to Wireless Communications

Directory of Open Access Journals (Sweden)

Kung HT

2007-01-01

Full Text Available This paper considers communications and network systems whose properties are characterized by the gaps of the leading eigenvalues of for a matrix . It is shown that a sufficient and necessary condition for a large eigen-gap is that is a "hub" matrix in the sense that it has dominant columns. Some applications of this hub theory in multiple-input and multiple-output (MIMO wireless systems are presented.

Usability of Public Administration Electronic Forms

Directory of Open Access Journals (Sweden)

Miloslav Hub

2015-06-01

Full Text Available This paper is focused on the testing and evaluating of public administration electronic forms from the usability point of view. Its objective is to design a suitable methodology for usability testing of electronic forms and their description and distribution to public administration information systems professionals. Firstly, methods of usability engineering are summarized and a suitable method for usability testing and evaluation of electronic forms is selected. Farther, the methodology of electronic forms usability testing that uses the selected method is suggested. In the last part of the paper the case study that uses the proposed methodology is suggested and performed. The main benefit of the work is the design of testing methodology and proposition of the set of recommendations for new public administration electronic forms design.

The Virtual Campus Hub Concept

DEFF Research Database (Denmark)

Badger, Merete; Prag, Sidsel-Marie Winther; Monaco, Lucio

of Technology in Sweden, Politecnico di Torino in Italy, and Eindhoven University of Technology in the Netherlands. The project is partially funded by the European Commission under the 7th Framework Programme (project no. RI-283746). This report describes the final concept of Virtual Campus Hub. It gives...

Problem Prioritization in Usability Evaluation:

DEFF Research Database (Denmark)

Hertzum, Morten

2006-01-01

Severity assessments enable prioritization of problems encountered during usability evaluations and thereby provide a device for guiding the utilization of design resources. However, designers' response to usability evaluations is also influenced by other factors, which may overshadow severity....... With the purpose of enhancing the impact of severity assessments, this study combines a field study of factors that influence the impact of evaluations with an experimental study of severity assessments made during usability inspections. The results show that even in a project receptive to input from evaluations...... their impact was highly dependent on conducting evaluations early. This accorded with an informal method that blended elements of usability evaluation and participatory design and could be extended with user-made severity assessments. The major cost associated with the evaluations was not finding but fixing...

Neuroanatomical correlates of perceived usability

DEFF Research Database (Denmark)

Vi, Chi Thanh; Hornbæk, Kasper; Subramanian, Sriram

2017-01-01

Usability has a distinct subjective component, yet surprisingly little is known about its neural basis and relation to the neuroanatomy of aesthetics. To begin closing this gap, we conducted two functional magnetic resonance imaging studies in which participants were shown static webpages (in...... the first study) and videos of interaction with webpages (in the second study). The webpages were controlled so as to exhibit high and low levels of perceived usability and perceived aesthetics. Our results show unique links between perceived usability and brain areas involved in functions such as emotional...... processing (left fusiform gyrus, superior frontal gyrus), anticipation of physical interaction (precentral gyrus), task intention (anterior cingulate cortex), and linguistic processing (medial and bilateral superior frontal gyri). We use these findings to discuss the brain correlates of perceived usability...

MyGeoHub: A Collaborative Geospatial Research and Education Platform

Science.gov (United States)

Kalyanam, R.; Zhao, L.; Biehl, L. L.; Song, C. X.; Merwade, V.; Villoria, N.

2017-12-01

Scientific research is increasingly collaborative and globally distributed; research groups now rely on web-based scientific tools and data management systems to simplify their day-to-day collaborative workflows. However, such tools often lack seamless interfaces, requiring researchers to contend with manual data transfers, annotation and sharing. MyGeoHub is a web platform that supports out-of-the-box, seamless workflows involving data ingestion, metadata extraction, analysis, sharing and publication. MyGeoHub is built on the HUBzero cyberinfrastructure platform and adds general-purpose software building blocks (GABBs), for geospatial data management, visualization and analysis. A data management building block iData, processes geospatial files, extracting metadata for keyword and map-based search while enabling quick previews. iData is pervasive, allowing access through a web interface, scientific tools on MyGeoHub or even mobile field devices via a data service API. GABBs includes a Python map library as well as map widgets that in a few lines of code, generate complete geospatial visualization web interfaces for scientific tools. GABBs also includes powerful tools that can be used with no programming effort. The GeoBuilder tool provides an intuitive wizard for importing multi-variable, geo-located time series data (typical of sensor readings, GPS trackers) to build visualizations supporting data filtering and plotting. MyGeoHub has been used in tutorials at scientific conferences and educational activities for K-12 students. MyGeoHub is also constantly evolving; the recent addition of Jupyter and R Shiny notebook environments enable reproducible, richly interactive geospatial analyses and applications ranging from simple pre-processing to published tools. MyGeoHub is not a monolithic geospatial science gateway, instead it supports diverse needs ranging from just a feature-rich data management system, to complex scientific tools and workflows.

Usability evaluation of healthcare information systems: comparison of methods and classification of usability problems

NARCIS (Netherlands)

Khajouei, R.

2011-01-01

In ziekenhuizen wordt steeds meer gebruik gemaakt van informatiesystemen, maar de usability laat vaak te wensen over. Reza Khajouei testte twee methodes om de usability te beoordelen. Hij constateert dat beide methoden ongeveer evenveel, maar verschillende problemen aan het licht brengen. Uit een

Soft Power and Cultural Diplomacy: Emerging Education Hubs in Asia

Science.gov (United States)

Lee, Jack T.

2015-01-01

Several education hubs have emerged in Asia and the Middle East in recent years with a specific focus on cross-border higher education. Through considerable efforts in policy planning and generous funding, these hubs aim to transform a country or city into an eminent destination for education, research, and training. The inherent design of these…

Supporting Usability Engineering in Small Software Development Organizations

DEFF Research Database (Denmark)

Bornoe, Nis; Stage, Jan

2013-01-01

Despite an interest and use of different usability engineering methods small software development organizations find it challenging to implement usability engineering into the software development process. We present the results from a study about usability engineering in practice. Through a series...... of semistructured interviews we want to get an understanding of how usability is implemented into the organizations and how it’s practiced in reality. We found that the developers found it problematic to combine agile software development methods with classic usability engineering methods. A lack of solid usability...... engineering expertise and not least experience seems to be a main obstacle for a successful implementation of usability engineering into current software development practices. They are requesting methods and procedures that fit better with their current practices and strategies to implement usability...

Analysis of Sci-Hub downloads of computer science papers

Directory of Open Access Journals (Sweden)

Andročec Darko

2017-07-01

Full Text Available The scientific knowledge is disseminated by research papers. Most of the research literature is copyrighted by publishers and avail- able only through paywalls. Recently, some websites offer most of the recent content for free. One of them is the controversial website Sci-Hub that enables access to more than 47 million pirated research papers. In April 2016, Science Magazine published an article on Sci-Hub activity over the period of six months and publicly released the Sci-Hub’s server log data. The mentioned paper aggregates the view that relies on all downloads and for all fields of study, but these findings might be hiding interesting patterns within computer science. The mentioned Sci-Hub log data was used in this paper to analyse downloads of computer science papers based on DBLP’s list of computer science publications. The top downloads of computer science papers were analysed, together with the geographical location of Sci-Hub users, the most downloaded publishers, types of papers downloaded, and downloads of computer science papers per publication year. The results of this research can be used to improve legal access to the most relevant scientific repositories or journals for the computer science field.

Advancing Usability Evaluation through Human Reliability Analysis

International Nuclear Information System (INIS)

Ronald L. Boring; David I. Gertman

2005-01-01

This paper introduces a novel augmentation to the current heuristic usability evaluation methodology. The SPAR-H human reliability analysis method was developed for categorizing human performance in nuclear power plants. Despite the specialized use of SPAR-H for safety critical scenarios, the method also holds promise for use in commercial off-the-shelf software usability evaluations. The SPAR-H method shares task analysis underpinnings with human-computer interaction, and it can be easily adapted to incorporate usability heuristics as performance shaping factors. By assigning probabilistic modifiers to heuristics, it is possible to arrive at the usability error probability (UEP). This UEP is not a literal probability of error but nonetheless provides a quantitative basis to heuristic evaluation. When combined with a consequence matrix for usability errors, this method affords ready prioritization of usability issues

Using hybrid latent class model for city-HUBs´users behaviour analysis

OpenAIRE

Di Ciommo, Floridea; Monzón de Cáceres, Andrés; Oña, Rocío de; Oña López, Juan de; Hernández del Olmo, Sara

2014-01-01

Data from an attitudinal survey and stated preference ranking experiment conducted in two urban European interchanges (i.e. City-HUBs) in Madrid (Spain) and Thessaloniki (Greece) show that the importance that City-HUBs users attach to the intermodal infrastructure varies strongly as a function of their perceptions of time spent in the interchange (i.e.intermodal transfer and waiting time). A principal components analysis allocates respondents (i.e. city-HUB users) to two classes with substant...

The BioHub Knowledge Base: Ontology and Repository for Sustainable Biosourcing.

Science.gov (United States)

Read, Warren J; Demetriou, George; Nenadic, Goran; Ruddock, Noel; Stevens, Robert; Winter, Jerry

2016-06-01

The motivation for the BioHub project is to create an Integrated Knowledge Management System (IKMS) that will enable chemists to source ingredients from bio-renewables, rather than from non-sustainable sources such as fossil oil and its derivatives. The BioHubKB is the data repository of the IKMS; it employs Semantic Web technologies, especially OWL, to host data about chemical transformations, bio-renewable feedstocks, co-product streams and their chemical components. Access to this knowledge base is provided to other modules within the IKMS through a set of RESTful web services, driven by SPARQL queries to a Sesame back-end. The BioHubKB re-uses several bio-ontologies and bespoke extensions, primarily for chemical feedstocks and products, to form its knowledge organisation schema. Parts of plants form feedstocks, while various processes generate co-product streams that contain certain chemicals. Both chemicals and transformations are associated with certain qualities, which the BioHubKB also attempts to capture. Of immediate commercial and industrial importance is to estimate the cost of particular sets of chemical transformations (leading to candidate surfactants) performed in sequence, and these costs too are captured. Data are sourced from companies' internal knowledge and document stores, and from the publicly available literature. Both text analytics and manual curation play their part in populating the ontology. We describe the prototype IKMS, the BioHubKB and the services that it supports for the IKMS. The BioHubKB can be found via http://biohub.cs.manchester.ac.uk/ontology/biohub-kb.owl .

Features analysis for identification of date and party hubs in protein interaction network of Saccharomyces Cerevisiae

Directory of Open Access Journals (Sweden)

Araabi Babak N

2010-12-01

Full Text Available Abstract Background It has been understood that biological networks have modular organizations which are the sources of their observed complexity. Analysis of networks and motifs has shown that two types of hubs, party hubs and date hubs, are responsible for this complexity. Party hubs are local coordinators because of their high co-expressions with their partners, whereas date hubs display low co-expressions and are assumed as global connectors. However there is no mutual agreement on these concepts in related literature with different studies reporting their results on different data sets. We investigated whether there is a relation between the biological features of Saccharomyces Cerevisiae's proteins and their roles as non-hubs, intermediately connected, party hubs, and date hubs. We propose a classifier that separates these four classes. Results We extracted different biological characteristics including amino acid sequences, domain contents, repeated domains, functional categories, biological processes, cellular compartments, disordered regions, and position specific scoring matrix from various sources. Several classifiers are examined and the best feature-sets based on average correct classification rate and correlation coefficients of the results are selected. We show that fusion of five feature-sets including domains, Position Specific Scoring Matrix-400, cellular compartments level one, and composition pairs with two and one gaps provide the best discrimination with an average correct classification rate of 77%. Conclusions We study a variety of known biological feature-sets of the proteins and show that there is a relation between domains, Position Specific Scoring Matrix-400, cellular compartments level one, composition pairs with two and one gaps of Saccharomyces Cerevisiae's proteins, and their roles in the protein interaction network as non-hubs, intermediately connected, party hubs and date hubs. This study also confirms the

Functional Hubs in Mild Cognitive Impairment

Science.gov (United States)

Navas, Adrián; Papo, David; Boccaletti, Stefano; Del-Pozo, F.; Bajo, Ricardo; Maestú, Fernando; Martínez, J. H.; Gil, Pablo; Sendiña-Nadal, Irene; Buldú, Javier M.

We investigate how hubs of functional brain networks are modified as a result of mild cognitive impairment (MCI), a condition causing a slight but noticeable decline in cognitive abilities, which sometimes precedes the onset of Alzheimer's disease. We used magnetoencephalography (MEG) to investigate the functional brain networks of a group of patients suffering from MCI and a control group of healthy subjects, during the execution of a short-term memory task. Couplings between brain sites were evaluated using synchronization likelihood, from which a network of functional interdependencies was constructed and the centrality, i.e. importance, of their nodes was quantified. The results showed that, with respect to healthy controls, MCI patients were associated with decreases and increases in hub centrality respectively in occipital and central scalp regions, supporting the hypothesis that MCI modifies functional brain network topology, leading to more random structures.

MODELS AND METHODS FOR LOGISTICS HUB LOCATION: A REVIEW TOWARDS TRANSPORTATION NETWORKS DESIGN

Directory of Open Access Journals (Sweden)

Carolina Luisa dos Santos Vieira

Full Text Available ABSTRACT Logistics hubs affect the distribution patterns in transportation networks since they are flow-concentrating structures. Indeed, the efficient moving of goods throughout supply chains depends on the design of such networks. This paper presents a literature review on the logistics hub location problem, providing an outline of modeling approaches, solving techniques, and their applicability to such context. Two categories of models were identified. While multi-criteria models may seem best suited to find optimal locations, they do not allow an assessment of the impact of new hubs on goods flow and on the transportation network. On the other hand, single-criterion models, which provide location and flow allocation information, adopt network simplifications that hinder an accurate representation of the relationshipbetween origins, destinations, and hubs. In view of these limitations we propose future research directions for addressing real challenges of logistics hubs location regarding transportation networks design.

Epidemics in Complex Networks: The Diversity of Hubs

Science.gov (United States)

Kitsak, Maksim; Gallos, Lazaros K.; Havlin, Shlomo; Stanley, H. Eugene; Makse, Hernan A.

2009-03-01

Many complex systems are believed to be vulnerable to spread of viruses and information owing to their high level of interconnectivity. Even viruses of low contagiousness easily proliferate the Internet. Rumors, fads, and innovation ideas are prone to efficient spreading in various social systems. Another commonly accepted standpoint is the importance of the most connected elements (hubs) in the spreading processes. We address following questions. Do all hubs conduct epidemics in the same manner? How does the epidemics spread depend on the structure of the network? What is the most efficient way to spread information over the system? We analyze several large-scale systems in the framework of of the susceptible/infective/removed (SIR) disease spread model which can also be mapped to the problem of rumor or fad spreading. We show that hubs are often ineffective in the transmission of virus or information owing to the highly heterogeneous topology of most networks. We also propose a new tool to evaluate the efficiency of nodes in spreading virus or information.

Looking Into Pandora's Box: The Content Of Sci-Hub And Its Usage

OpenAIRE

Greshake, Bastian

2017-01-01

Despite the growth of Open Access, potentially illegally circumventing paywalls to access scholarly publications is becoming a more mainstream phenomenon. The web service Sci-Hub is amongst the biggest facilitators of this, offering free access to around 62 million publications. So far it is not well studied how and why its users are accessing publications through Sci-Hub. By utilizing the recently released corpus of Sci-Hub and comparing it to the data of  ~28 million downloads done through ...

Influence of Hub Parameters on Joining Forces and Torque Transmission Output of Plastically-Joined Shaft-Hub-Connections with a Knurled Contact Surface

Directory of Open Access Journals (Sweden)

Lukáš Suchý

2018-04-01

Full Text Available A knurled interference fit is a machine part connection made by a plastic joining, which includes the advantages of commonly-used shaft-hub-connections. The combination of the friction and form fit, which are responsible for torque transmission, results in a higher power density than conventional connections. In this paper, parameter gaps are bridged with the aim of enhance the design calculation of the knurled interference fit. Experimental investigations on the shaft chamfer angle (100Cr6 and hub-diameter-ratio (AlSi1MgMn were performed. The analytical approaches are developed for calculating the joining force and maximal torque capacity by accounting for experimentally investigated loss of load transmission at high hub-diameter-ratios and high shaft chamfer angles. The presented calculation approach is an accurate tool for the assessment of early machine designs of the knurled interference fit and helps to save from having to perform time-extensive tests.

Economic Impact of the Dutch Gas Hub Strategy on the Netherlands

International Nuclear Information System (INIS)

Harris, D.; Bazelon, C.; Humphreys, B.; Dickson, P.

2010-09-01

Since the discovery of the Groningen gas field in 1959, the Netherlands has been a key player in the European gas market. The Netherlands has built up a large onshore and offshore Exploration and Production sector, it has a highly developed gas transmission and distribution network, and is a major exporter of gas to other EU Member States. The Netherlands has considerable expertise in all parts of the gas supply chain, and is a world centre for Research and development in natural gas supply and use. More recently construction has begun on terminals to allow the import of Liquid Natural Gas to the Netherlands. However, Dutch gas reserves are now in decline, and the Netherlands will become a net importer of gas around 2025. The Dutch government wishes to capitalise on the existing industry and skills and sustain the Netherlands' place in the European gas industry beyond the life of the existing gas fields. In November 2009 the Minister of Economic Affairs published a paper describing the strategy of turning the Netherlands into a 'Gas Hub' or 'gas roundabout' for north-west Europe. The Dutch government intends that the gas hub would capitalise on the existing skills and industry, increase competition and security of supply in the Dutch gas market, create employment and make a significant contribution to the Dutch economy. The Dutch Ministry of Economic Affairs, Agriculture and Innovation has commissioned The Brattle Group to perform an analysis of the economic impact of the gas hub concept. The study has several aims including: To analyse the current contribution of the Dutch gas sector to the economy; To assess the Strengths, Weaknesses, Opportunities and Threats associated with the gas hub strategy; To quantify the benefits of the gas hub strategy to the Dutch economy. Note that the aim of the study is to define in more detail what a successful Dutch gas hub strategy would look like, to assess the strengths and weakness of the Dutch gas sector in achieving a

The Banana Genome Hub

Science.gov (United States)

Droc, Gaëtan; Larivière, Delphine; Guignon, Valentin; Yahiaoui, Nabila; This, Dominique; Garsmeur, Olivier; Dereeper, Alexis; Hamelin, Chantal; Argout, Xavier; Dufayard, Jean-François; Lengelle, Juliette; Baurens, Franc-Christophe; Cenci, Alberto; Pitollat, Bertrand; D’Hont, Angélique; Ruiz, Manuel; Rouard, Mathieu; Bocs, Stéphanie

2013-01-01

Banana is one of the world’s favorite fruits and one of the most important crops for developing countries. The banana reference genome sequence (Musa acuminata) was recently released. Given the taxonomic position of Musa, the completed genomic sequence has particular comparative value to provide fresh insights about the evolution of the monocotyledons. The study of the banana genome has been enhanced by a number of tools and resources that allows harnessing its sequence. First, we set up essential tools such as a Community Annotation System, phylogenomics resources and metabolic pathways. Then, to support post-genomic efforts, we improved banana existing systems (e.g. web front end, query builder), we integrated available Musa data into generic systems (e.g. markers and genetic maps, synteny blocks), we have made interoperable with the banana hub, other existing systems containing Musa data (e.g. transcriptomics, rice reference genome, workflow manager) and finally, we generated new results from sequence analyses (e.g. SNP and polymorphism analysis). Several uses cases illustrate how the Banana Genome Hub can be used to study gene families. Overall, with this collaborative effort, we discuss the importance of the interoperability toward data integration between existing information systems. Database URL: http://banana-genome.cirad.fr/ PMID:23707967

Location of an intermediate hub for port activities

Science.gov (United States)

Burciu, Ş.; Ştefănică, C.; Roşca, E.; Dragu, V.; Ruscă, F.

2015-11-01

An intermediate hub might increase the accessibility level of ports but also hinterland and so it can be considered more than a facility with a transhipment role. These hubs might lead to the development of other transport services and enhance their role in gathering and covering economic centres within hinterlands and also getting the part of logistic facility for the ports, with effects on port utilization and its connectivity to global economy. A new location for a hub terminal leads to reduced transport distances within hinterland, with decreased transport costs and external effects, so with gains in people's life quality. Because the production and distribution systems are relatively fixed on short and medium term and the location decisions are strategic and on long term, the logistic chains activities location models have to consider the uncertainties regarding the possible future situations. In most models, production costs are considered equal, the location problem reducing itself to a problem that aims to minimize the total transport costs, meaning the transport problem. The main objective of the paper is to locate a hub terminal that links the producers of cereals that are going to be exported by naval transportation with the Romanian fluvial-maritime ports (Galaţi, Brăila). GIS environment can be used to integrate and analyse a great amount of data and has the ability of using functions as location - allocation models necessary both to private and public sector, being able to determine the optimal location for services like factories, warehouses, logistic platforms and other public services.

Combining usability evaluations to highlight the chain that leads from usability flaws to usage problems and then negative outcomes.

Science.gov (United States)

Watbled, Ludivine; Marcilly, Romaric; Guerlinger, Sandra; Bastien, J-M Christian; Beuscart-Zéphir, Marie-Catherine; Beuscart, Régis

2018-02-01

Poor usability of health technology is thought to diminish work system performance, increase error rates and, potentially, harm patients. The present study (i) used a combination of usability evaluation methods to highlight the chain that leads from usability flaws to usage problems experienced by users and, ultimately, to negative patient outcomes, and (ii) validated this approach by studying two different discharge summary production systems. To comply with quality guidelines, the process of drafting and sending discharge summaries is increasingly being automated. However, the usability of these systems may modify their impact (or the absence thereof) in terms of production times and quality, and must therefore be evaluated. Here, we applied three successive techniques for usability evaluation (heuristic evaluation, user testing and field observation) to two discharge summary production systems (underpinned by different technologies). The systems' main usability flaws led respectively to an increase in the time need to produce a discharge summary and the risk of patient misidentification. Our results are discussed with regard to the possibility of linking the usability flaws, usage problems and the negative outcomes by successively applying three methods for evaluating usability (heuristic evaluation, user testing and in situ observations) throughout the system development life cycle. Copyright © 2018 Elsevier Inc. All rights reserved.

Maritime Domain Awareness Architecture Management Hub Strategy

National Research Council Canada - National Science Library

2008-01-01

This document provides an initial high level strategy for carrying out the responsibilities of the national Maritime Domain Awareness Architecture Management Hub to deliver a standards based service...

Health Information Technology Usability Evaluation Scale (Health-ITUES) for Usability Assessment of Mobile Health Technology: Validation Study.

Science.gov (United States)

Schnall, Rebecca; Cho, Hwayoung; Liu, Jianfang

2018-01-05

Mobile technology has become a ubiquitous technology and can be particularly useful in the delivery of health interventions. This technology can allow us to deliver interventions to scale, cover broad geographic areas, and deliver technologies in highly tailored ways based on the preferences or characteristics of users. The broad use of mobile technologies supports the need for usability assessments of these tools. Although there have been a number of usability assessment instruments developed, none have been validated for use with mobile technologies. The goal of this work was to validate the Health Information Technology Usability Evaluation Scale (Health-ITUES), a customizable usability assessment instrument in a sample of community-dwelling adults who were testing the use of a new mobile health (mHealth) technology. A sample of 92 community-dwelling adults living with HIV used a new mobile app for symptom self-management and completed the Health-ITUES to assess the usability of the app. They also completed the Post-Study System Usability Questionnaire (PSSUQ), a widely used and well-validated usability assessment tool. Correlations between these scales and each of the subscales were assessed. The subscales of the Health-ITUES showed high internal consistency reliability (Cronbach alpha=.85-.92). Each of the Health-ITUES subscales and the overall scale was moderately to strongly correlated with the PSSUQ scales (r=.46-.70), demonstrating the criterion validity of the Health-ITUES. The Health-ITUES has demonstrated reliability and validity for use in assessing the usability of mHealth technologies in community-dwelling adults living with a chronic illness. ©Rebecca Schnall, Hwayoung Cho, Jianfang Liu. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 05.01.2018.

Usability and Interaction Design in West Africa

DEFF Research Database (Denmark)

Sørensen, Jannick Kirk

Good usability is important in all ICT solutions. To achieve good usability, a good praxis for interaction design is needed. Usability and interaction design have however emerged and established itself in a North European and US context. The ICT industry in Africa do not have the same resources...... for user-involvement and participatory design be directly transferred? How can interaction design and usability be cared for in African ICT development context, given the resources available? This paper aims to initiate a discussion of the conditions for interaction design and usability in West Africa...... in the field of interaction design as in the developed world. While good usability and good user experiences are important to all users of ICT, the question is whether the methods and techniques that were mainly developed in Scandinavia, Europe and US are suitable for ICT development in Africa? Can ideals...

Qualitative Marketing Research Through Usability Testing

Directory of Open Access Journals (Sweden)

Orzan Mihai

2008-04-01

Full Text Available Usability is an attribute of any good product, just as its functionality. It refers mainly to the utility of a product for its indented users, as well as to its ease of use. And whilst a correct functionality is critical for the commercial success of any product, its value comes through the human needs that it fulfills, which is determined through various marketing research techniques. In parallel, the IT&C community has developed in the last two decades its own type of research, called usability testing, used mainly to evaluate interface ease of use and all usability problems associated with.software products. This article aims at finding the right place for usability testing and usability professionals in the marketing community, as well as drawing a wider picture, from a marketing research perspective, on one of the most popular topics in IT&C community for the benefit of marketing scholars and professionals.

Understanding Usability Work as a Human Activity

DEFF Research Database (Denmark)

Nørgaard, Mie

Three core themes are explored in eight papers: Usability work as a human activity, usability practice and methods, and persuasiveness of evaluation results and feedback. We explore how usability work is much more than methods and work procedures, and argue that maturing our understanding...

HIV protein sequence hotspots for crosstalk with host hub proteins.

Directory of Open Access Journals (Sweden)

Mahdi Sarmady

Full Text Available HIV proteins target host hub proteins for transient binding interactions. The presence of viral proteins in the infected cell results in out-competition of host proteins in their interaction with hub proteins, drastically affecting cell physiology. Functional genomics and interactome datasets can be used to quantify the sequence hotspots on the HIV proteome mediating interactions with host hub proteins. In this study, we used the HIV and human interactome databases to identify HIV targeted host hub proteins and their host binding partners (H2. We developed a high throughput computational procedure utilizing motif discovery algorithms on sets of protein sequences, including sequences of HIV and H2 proteins. We identified as HIV sequence hotspots those linear motifs that are highly conserved on HIV sequences and at the same time have a statistically enriched presence on the sequences of H2 proteins. The HIV protein motifs discovered in this study are expressed by subsets of H2 host proteins potentially outcompeted by HIV proteins. A large subset of these motifs is involved in cleavage, nuclear localization, phosphorylation, and transcription factor binding events. Many such motifs are clustered on an HIV sequence in the form of hotspots. The sequential positions of these hotspots are consistent with the curated literature on phenotype altering residue mutations, as well as with existing binding site data. The hotspot map produced in this study is the first global portrayal of HIV motifs involved in altering the host protein network at highly connected hub nodes.

Course management systems from a usability perspective

CSIR Research Space (South Africa)

Padayachee, I

2011-01-01

Full Text Available (with knowledge of usability engineering and system domain knowledge) who inspect the Indira Padayachee, Paula Kotz? and Alta van der Merwe 302 interface and determine its compliance with recognized usability principles (the ?heuristics... presents a summary of the results of the severity rating. Table 2: Severity Rating Scale for Usability Problems (Nielsen 2007b) 0 I don?t agree that this is a usability problem at all 1 Cosmetic problem only: need not be fixed unless there is extra...

Usability Problems in a Home Telemedicine System

DEFF Research Database (Denmark)

Bruun, Anders; Stage, Jan

2010-01-01

a high level of usability in order to enable their users to employ the required functionality, especially if the target user group is elderly people. This paper reports from a usability evaluation of a home telemedicine system. Five elderly persons carried out specified tasks with the system, and based...... on that we identified usability problems with the system. The problems are presented, analysed in relation to 12 different usability themes and related to results from other evaluations of similar systems....

Energy flow modeling and optimal operation analysis of the micro energy grid based on energy hub

International Nuclear Information System (INIS)

Ma, Tengfei; Wu, Junyong; Hao, Liangliang

2017-01-01

Highlights: • Design a novel architecture for energy hub integrating power hub, cooling hub and heating hub. • The micro energy grid based on energy hub is introduced and its advantages are discussed. • Propose a generic modeling method for the energy flow of micro energy grid. • Propose an optimal operation model for micro energy grid with considering demand response. • The roles of renewable energy, energy storage devices and demand response are discussed separately. - Abstract: The energy security and environmental problems impel people to explore a more efficient, environment friendly and economical energy utilization pattern. In this paper, the coordinated operation and optimal dispatch strategies for multiple energy system are studied at the whole Micro Energy Grid level. To augment the operation flexibility of energy hub, the innovation sub-energy hub structure including power hub, heating hub and cooling hub is put forward. Basing on it, a generic energy hub architecture integrating renewable energy, combined cooling heating and power, and energy storage devices is developed. Moreover, a generic modeling method for the energy flow of micro energy grid is proposed. To minimize the daily operation cost, a day-ahead dynamic optimal operation model is formulated as a mixed integer linear programming optimization problem with considering the demand response. Case studies are undertaken on a community Micro Energy Grid in four different scenarios on a typical summer day and the roles of renewable energy, energy storage devices and demand response are discussed separately. Numerical simulation results indicate that the proposed energy flow modeling and optimal operation method are universal and effective over the entire energy dispatching horizon.

Software architecture analysis of usability

NARCIS (Netherlands)

Folmer, E; van Gurp, J; Bosch, J; Bastide, R; Palanque, P; Roth, J

2005-01-01

Studies of software engineering projects show that a large number of usability related change requests are made after its deployment. Fixing usability problems during the later stages of development often proves to be costly, since many of the necessary changes require changes to the system that

Report on survey on international Hub

International Nuclear Information System (INIS)

Ebisawa, Hirobumi; Hoshino, Junko; Hashimoto, Kazuichiro; Okada, Sohei

2011-03-01

Japan Atomic Energy Agency (JAEA) is promoting initiative to form an international Center of Excellence in line with its aim to accept more researchers/engineers from all over the world. Establishment of 'the Committee for JAEA Internationalization Initiative' was planned in 2010 so as to intensify this initiative, and in February, 2010, we visited research institutions in Europe, which include European Organization for Nuclear Research (CERN), the construction site of ITER in Cadarache, and Rutherford Appleton Laboratory (RAL), with the intention to survey and learn their advanced activities and systems in regard to the International Hub, so that the committee will be able to make fruitful discussion. This report describes strategy taken in each institution for an International Hub, and the state of each institution regarding acceptance and management of overseas researchers and engineers, research environment, living environment/health and welfare, and PR activities/coexistence with the local community. (author)

Increasing the impact of usability work in software development

DEFF Research Database (Denmark)

Uldall-Espersen, Tobias; Frøkjær, Erik

2006-01-01

Usability, Case Study, Software Engineering, Software Quality, Organizational Impact, Usability Requirement Management, CHI 2007 workshop......Usability, Case Study, Software Engineering, Software Quality, Organizational Impact, Usability Requirement Management, CHI 2007 workshop...

Towards Evidence Based Usability in Health Informatics?

NARCIS (Netherlands)

Marcilly, Romaric; Peute, Linda W.; Beuscart-Zephir, Marie-Catherine; Jaspers, Monique W.

2015-01-01

In a Health Information Technology (HIT) regulatory context in which the usability of this technology is more and more a critical issue, there is an increasing need for evidence based usability practice. However, a clear definition of evidence based usability practice and how to achieve it is still

Modeling and optimization of a network of energy hubs to improve economic and emission considerations

International Nuclear Information System (INIS)

Maroufmashat, Azadeh; Elkamel, Ali; Fowler, Michael; Sattari, Sourena; Roshandel, Ramin; Hajimiragha, Amir; Walker, Sean; Entchev, Evgueniy

2015-01-01

Energy hubs that incorporate a variety of energy generation and energy transformation technologies can be used to provide the energy storage needed to enable the efficient operation of a ‘smart energy network’. When these hubs are combined as a network and allowed to exchange energy, they create efficiency advantages in both financial and environmental performance. Further, the interconnectedness of the energy network design provides an added layer of reliability. In this paper, a complex network of energy hubs is modeled and optimized under different scenarios to examine both the financial viability and potential reduction of greenhouse gas emissions. Two case studies consisting of two and three energy hubs within a network are considered. The modeling Scenarios vary according to the consideration of distributed energy systems and energy interaction between energy hubs. In the case of a network of two energy hubs, there is no significant economic or emissions benefit with only a 0.5% reduction in total cost and 3% reduction in CO_2 emission. In the case of a network of three energy hubs, there is a significant economic benefit ranging from 11% to 29%, and 11% emission reduction benefit, as well as a 13% reduction in natural gas consumption. - Highlights: • The generic form of the modified energy hub concept with network model is presented. • Two case studies are presented to demonstrate the benefits of energy hub network. • Distributed energy is shown to provide economic and environmental advantages. • Multi criteria optimization of the economic and environmental performance is done.

Usability and User Experience Information in Reviews

DEFF Research Database (Denmark)

Hedegaard, Steffen

future versions of the prod- uct? The results show that users write about product use in terms related to standard and popularly researched aspects of usability and user experience, e.g. effiiency, effectiveness, enjoyment, frustration. The frequency with which different aspects are depicted in reviews...... differs significantly between product domains. We also find that reviews contain descriptions of more persistent usability issues. I devise automatic methods for classifying sentences with regard to dimensions of both usability and user experience and usability problems and perform a linguistic analysis...

Usability Evaluation in a Digitally Emerging Country

DEFF Research Database (Denmark)

Lizano, Fulvio; Sandoval, Maria Marta; Bruun, Anders

2013-01-01

Several emerging countries experience increasing software development activities. With the purpose of provide useful feedback on possible courses of action for increasing application of usability evaluation in such countries, this paper explores the status of usability evaluation in a digitally...... emerging country. Our aim is to identifying common characteristics or behavioral patterns that could be compared with digitally advanced countries. We used an online survey answered by 26 software development organizations, which gave a snapshot of the application of usability evaluation...... in these organizations. We found many similarities with advanced countries, several completely new obstacles more connected with software development matters and a relatively positive improvement in the lack of “usability culture”. These findings suggest good conditions to improve conduction of usability evaluations...

Disrupted Nodal and Hub Organization Account for Brain Network Abnormalities in Parkinson's Disease.

Science.gov (United States)

Koshimori, Yuko; Cho, Sang-Soo; Criaud, Marion; Christopher, Leigh; Jacobs, Mark; Ghadery, Christine; Coakeley, Sarah; Harris, Madeleine; Mizrahi, Romina; Hamani, Clement; Lang, Anthony E; Houle, Sylvain; Strafella, Antonio P

2016-01-01

The recent application of graph theory to brain networks promises to shed light on complex diseases such as Parkinson's disease (PD). This study aimed to investigate functional changes in sensorimotor and cognitive networks in Parkinsonian patients, with a focus on inter- and intra-connectivity organization in the disease-associated nodal and hub regions using the graph theoretical analyses. Resting-state functional MRI data of a total of 65 participants, including 23 healthy controls (HCs) and 42 patients, were investigated in 120 nodes for local efficiency, betweenness centrality, and degree. Hub regions were identified in the HC and patient groups. We found nodal and hub changes in patients compared with HCs, including the right pre-supplementary motor area (SMA), left anterior insula, bilateral mid-insula, bilateral dorsolateral prefrontal cortex (DLPFC), and right caudate nucleus. In general, nodal regions within the sensorimotor network (i.e., right pre-SMA and right mid-insula) displayed weakened connectivity, with the former node associated with more severe bradykinesia, and impaired integration with default mode network regions. The left mid-insula also lost its hub properties in patients. Within the executive networks, the left anterior insular cortex lost its hub properties in patients, while a new hub region was identified in the right caudate nucleus, paralleled by an increased level of inter- and intra-connectivity in the bilateral DLPFC possibly representing compensatory mechanisms. These findings highlight the diffuse changes in nodal organization and regional hub disruption accounting for the distributed abnormalities across brain networks and the clinical manifestations of PD.

A collaborative scheduling model for the supply-hub with multiple suppliers and multiple manufacturers.

Science.gov (United States)

Li, Guo; Lv, Fei; Guan, Xu

2014-01-01

This paper investigates a collaborative scheduling model in the assembly system, wherein multiple suppliers have to deliver their components to the multiple manufacturers under the operation of Supply-Hub. We first develop two different scenarios to examine the impact of Supply-Hub. One is that suppliers and manufacturers make their decisions separately, and the other is that the Supply-Hub makes joint decisions with collaborative scheduling. The results show that our scheduling model with the Supply-Hub is a NP-complete problem, therefore, we propose an auto-adapted differential evolution algorithm to solve this problem. Moreover, we illustrate that the performance of collaborative scheduling by the Supply-Hub is superior to separate decision made by each manufacturer and supplier. Furthermore, we also show that the algorithm proposed has good convergence and reliability, which can be applicable to more complicated supply chain environment.

Web usability evaluation on BloobIS website by using hallway usability testing method and ISO 9241:11

Science.gov (United States)

Dwi Susanto, Tony; Ingesti Prasetyo, Anisa; Astuti, Hanim Maria

2018-03-01

At this moment, the need for web as an information media is highly important. Not only confined in the infotainment area, government, and education, but health as well uses the web media as a medium for providing information effectively. BloobIS is a web based application which integrates blood supply and distribution information at the Blood Transfusion Unit. Knowing how easy information is on BloobIS is marked by how convenient the website is used. Up until now, the BloobIS website is nearing completion but testing has not yet been performed to users and is on the testing and development phase in the Development Life Cycle software. Thus, an evaluation namely the quality control software which focuses on the perspective of BloobIs web usability is required. Hallway Usability Testing and ISO 9241:11 are the methods chosen to measure the BloobIS application usability. The expected outputs of the quality control software focusing on the usability evaluation are being able to rectify the usability deficiencies on the BloobIs web and provide recommendations to develop the web as a basic BloobIS web quality upgraed which sets a goal to amplify the satisfaction of web users based on usability factors in ISO 9241:11.

Fatigue based design and analysis of wheel hub for Student formula car by Simulation Approach

Science.gov (United States)

Gowtham, V.; Ranganathan, A. S.; Satish, S.; Alexis, S. John; Siva kumar, S.

2016-09-01

In the existing design of Wheel hub used for Student formula cars, the brake discs cannot be removed easily since the disc is mounted in between the knuckle and hub. In case of bend or any other damage to the disc, the replacement of the disc becomes difficult. Further using OEM hub and knuckle that are used for commercial vehicles will result in increase of unsprung mass, which should be avoided in Student formula cars for improving the performance. In this design the above mentioned difficulties have been overcome by redesigning the hub in such a way that the brake disc could be removed easily by just removing the wheel and the caliper and also it will have reduced weight when compared to existing OEM hub. A CAD Model was developed based on the required fatigue life cycles. The forces acting on the hub were calculated and linear static structural analysis was performed on the wheel hub for three different materials using ANSYS Finite Element code V 16.2. The theoretical fatigue strength was compared with the stress obtained from the structural analysis for each material.

Strategies for contracting gas storage and hub services

International Nuclear Information System (INIS)

Auld, J.

1996-01-01

The many efficiencies that can be gained by the natural gas industry in effectively using storage, were demonstrated. The circumstances under which the natural gas industry uses storage and how Market Centres or Hub Services can be strategically used in offering companies the highest flexibility in a tough marketplace, were explained. For example, in North America, storage played an important role during the winter of 95/96, which will be remembered for its extreme cold. That year provided the first true opportunity to test the natural gas delivery system since deregulation in 1985. The fact that natural gas supplies continued to be delivered throughout the entire winter was attributed to the use of stored gas held in reserves to meet the severe demand. The companies that did well, relied on storage and also on the services offered by Hub Services which increased margins for all players in the natural gas industry. Using storage, companies can ensure that field deliveries of gas are kept constant by having storage facilities absorb the swings in market demand. The companies that learn to use storage effectively can create competitive edges over their competition and provide more value to their customers. The three main categories of hub services were also described. These are parking (interruptible storage), gas loans (stored gas can be offered to customers on a term basis for low daily rates), and title exchange (the transfer of gas between buyer and seller). The strategic use of parking, loaned gas, title exchange, direct connections, and InterHub Services can provide customers even greater benefits than are provided by storage-based services. 6 figs

Matrix logistics indicators assessment of distributed transport hub

Directory of Open Access Journals (Sweden)

Igor Arefyev

2014-06-01

Full Text Available Background: The paper is devoted to the distributed transport hub substantiation and assessment. The paper  was an example of the technique and form an array of logistical factors as variables that determine this condition. Experience in organizing multimodal transport showed that the "bottleneck" of transport logistics are items of cargo handling ports, terminals, freight stations and warehouses. At the core of the solution of these problems is the problem of estimating the variables determine the Multi-purpose Hubs. The aim is to develop a method of forming the system of logistical multiplying factors determine the role of each of the types in the technologiacal process of distributed Multi-purpose Hubs. Methods: The assessment model for the formation of Distributed Transport Units  can be based on formal methods to predict the behavior of complex systems engineering complexes. Then one of the approaches to the solution of the problem may be the matrix method of technological factors. Results and conclusions: The proposed methodology of the selection and validation of logistic coefficients has the practical importance in the models development for assessing the condition and behavior of Distributed Transport.

Log files for testing usability

NARCIS (Netherlands)

Klein Teeselink, G.; Siepe, A.H.M.; Pijper, de J.R.

1999-01-01

The aim of this study is to gain insight in the usefulness of log file analysis as a method to evaluate the usability of individual interface components and their influence on the usability of the overall user interface. We selected a music player as application, with four different interfaces and

SPARK: Sparsity-based analysis of reliable k-hubness and overlapping network structure in brain functional connectivity.

Science.gov (United States)

Lee, Kangjoo; Lina, Jean-Marc; Gotman, Jean; Grova, Christophe

2016-07-01

Functional hubs are defined as the specific brain regions with dense connections to other regions in a functional brain network. Among them, connector hubs are of great interests, as they are assumed to promote global and hierarchical communications between functionally specialized networks. Damage to connector hubs may have a more crucial effect on the system than does damage to other hubs. Hubs in graph theory are often identified from a correlation matrix, and classified as connector hubs when the hubs are more connected to regions in other networks than within the networks to which they belong. However, the identification of hubs from functional data is more complex than that from structural data, notably because of the inherent problem of multicollinearity between temporal dynamics within a functional network. In this context, we developed and validated a method to reliably identify connectors and corresponding overlapping network structure from resting-state fMRI. This new method is actually handling the multicollinearity issue, since it does not rely on counting the number of connections from a thresholded correlation matrix. The novelty of the proposed method is that besides counting the number of networks involved in each voxel, it allows us to identify which networks are actually involved in each voxel, using a data-driven sparse general linear model in order to identify brain regions involved in more than one network. Moreover, we added a bootstrap resampling strategy to assess statistically the reproducibility of our results at the single subject level. The unified framework is called SPARK, i.e. SParsity-based Analysis of Reliable k-hubness, where k-hubness denotes the number of networks overlapping in each voxel. The accuracy and robustness of SPARK were evaluated using two dimensional box simulations and realistic simulations that examined detection of artificial hubs generated on real data. Then, test/retest reliability of the method was assessed

Managing Product Usability : How companies deal with usability in the development of electronic consumer products

NARCIS (Netherlands)

Van Kuijk, J.I.

2010-01-01

Problem statement: Even though there is a large amount of methods for user-centred design, the usability of electronic consumer products (e.g., portable music players, washing machines and mobile phones) is under pressure. Usability is the extent to which a product can be used by specified users to

Exploring the value of usability feedback formats

DEFF Research Database (Denmark)

Nørgaard, Mie; Hornbæk, Kasper Anders Søren

2009-01-01

The format used to present feedback from usability evaluations to developers affects whether problems are understood, accepted, and fixed. Yet, little research has investigated which formats are the most effective. We describe an explorative study where three developers assess 40 usability findings...... presented using five feedback formats. Our usability findings comprise 35 problems and 5 positive comments. Data suggest that feedback serves multiple purposes. Initially, feedback must convince developers about the relevance of a problem and convey an understanding of this. Feedback must next be easy...... working with the feedback to address the usability problems, there were no significant differences among the developers' ratings of the value of the different formats. This suggests that all of the formats may serve equally well as reminders in later stages of working with usability problems...

Tracing Impact in a Usability Improvement Process

DEFF Research Database (Denmark)

Uldall-Espersen, Tobias; Frøkjær, Erik; Hornbæk, Kasper Anders Søren

2008-01-01

Analyzing usability improvement processes as they take place in real-life organizations is necessary to understand the practice of usability work. This paper describes a case study where the usability of an information system is improved and a relationship between the improvements...... and the evaluation efforts is established. Results show that evaluation techniques complemented each other by suggesting different kinds of usability improvement. Among the techniques applied, a combination of questionnaires and Metaphors of Human Thinking (MOT) showed the largest mean impact and MOT produced...... the largest number of impacts. Logging of real-life use of the system over 6 months indicated six aspects of improved usability, where significant differences among evaluation techniques were found. Concerning five of the six aspects Think Aloud evaluations and the above-mentioned combination of questionnaire...

Surface-micromachined rotatable member having a low-contact-area hub

Science.gov (United States)

Rodgers, M. Steven; Sniegowski, Jeffry J.; Krygowski, Thomas W.

2003-11-18

A surface-micromachined rotatable member formed on a substrate and a method for manufacturing thereof are disclosed. The surface-micromachined rotatable member, which can be a gear or a rotary stage, has a central hub, and an annulus connected to the central hub by an overarching bridge. The hub includes a stationary axle support attached to the substrate and surrounding an axle. The axle is retained within the axle support with an air-gap spacing therebetween of generally 0.3 .mu.m or less. The rotatable member can be formed by alternately depositing and patterning layers of a semiconductor (e.g. polysilicon or a silicon-germanium alloy) and a sacrificial material and then removing the sacrificial material, at least in part. The present invention has applications for forming micromechanical or microelectromechanical devices requiring lower actuation forces, and providing improved reliability.

Surface--micromachined rotatable member having a low-contact-area hub

Science.gov (United States)

Rodgers, M. Steven; Sniegowski, Jeffry J.

2002-01-01

A surface-micromachined rotatable member formed on a substrate and a method for manufacturing thereof are disclosed. The surface-micromachined rotatable member, which can be a gear or a rotary stage, has a central hub, and an annulus connected to the central hub by an overarching bridge. The hub includes a stationary axle support attached to the substrate and surrounding an axle. The axle is retained within the axle support with an air-gap spacing therebetween of generally 0.3 .mu.m or less. The rotatable member can be formed by alternately depositing and patterning layers of a semiconductor (e.g. polysilicon or a silicon-germanium alloy) and a sacrificial material and then removing the sacrificial material, at least in part. The present invention has applications for forming micromechanical or microelectromechanical devices requiring lower actuation forces, and providing improved reliability.

A Collaborative Scheduling Model for the Supply-Hub with Multiple Suppliers and Multiple Manufacturers

Directory of Open Access Journals (Sweden)

Guo Li

2014-01-01

Full Text Available This paper investigates a collaborative scheduling model in the assembly system, wherein multiple suppliers have to deliver their components to the multiple manufacturers under the operation of Supply-Hub. We first develop two different scenarios to examine the impact of Supply-Hub. One is that suppliers and manufacturers make their decisions separately, and the other is that the Supply-Hub makes joint decisions with collaborative scheduling. The results show that our scheduling model with the Supply-Hub is a NP-complete problem, therefore, we propose an auto-adapted differential evolution algorithm to solve this problem. Moreover, we illustrate that the performance of collaborative scheduling by the Supply-Hub is superior to separate decision made by each manufacturer and supplier. Furthermore, we also show that the algorithm proposed has good convergence and reliability, which can be applicable to more complicated supply chain environment.

A Collaborative Scheduling Model for the Supply-Hub with Multiple Suppliers and Multiple Manufacturers

Science.gov (United States)

Lv, Fei; Guan, Xu

2014-01-01

This paper investigates a collaborative scheduling model in the assembly system, wherein multiple suppliers have to deliver their components to the multiple manufacturers under the operation of Supply-Hub. We first develop two different scenarios to examine the impact of Supply-Hub. One is that suppliers and manufacturers make their decisions separately, and the other is that the Supply-Hub makes joint decisions with collaborative scheduling. The results show that our scheduling model with the Supply-Hub is a NP-complete problem, therefore, we propose an auto-adapted differential evolution algorithm to solve this problem. Moreover, we illustrate that the performance of collaborative scheduling by the Supply-Hub is superior to separate decision made by each manufacturer and supplier. Furthermore, we also show that the algorithm proposed has good convergence and reliability, which can be applicable to more complicated supply chain environment. PMID:24892104

A note on hierarchical hubbing for a generalization of the VPN problem

NARCIS (Netherlands)

N.K. Olver (Neil)

2016-01-01

textabstractRobust network design refers to a class of optimization problems that occur when designing networks to efficiently handle variable demands. In this context, Fréchette et al. (2013) recently explored hierarchical hubbing: a routing strategy involving a multiplicity of "hubs" connected to

A note on hierarchical hubbing for a generalization of the VPN problem

NARCIS (Netherlands)

Olver, Neil

2016-01-01

Robust network design refers to a class of optimization problems that occur when designing networks to efficiently handle variable demands. In this context, Fréchette et al. (2013) recently explored hierarchical hubbing: a routing strategy involving a multiplicity of "hubs" connected to terminals

Improving Public Relations Web Sites through Usability Research.

Science.gov (United States)

Hallahan, Kirk

2001-01-01

Argues that usability research has particular relevance for enhancing the effectiveness of websites. Examines the nature and value of usability research, and the elements of an effective website based on usability principles. (SR)

Distributed user interfaces usability and collaboration

CERN Document Server

Lozano, María D; Tesoriero, Ricardo; Penichet, Victor MR

2013-01-01

Written by international researchers in the field of Distributed User Interfaces (DUIs), this book brings together important contributions regarding collaboration and usability in Distributed User Interface settings. Throughout the thirteen chapters authors address key questions concerning how collaboration can be improved by using DUIs, including: in which situations a DUI is suitable to ease the collaboration among users; how usability standards can be used to evaluate the usability of systems based on DUIs; and accurately describe case studies and prototypes implementing these concerns

Robust Energy Hub Management Using Information Gap Decision Theory

DEFF Research Database (Denmark)

Javadi, Mohammad Sadegh; Anvari-Moghaddam, Amjad; Guerrero, Josep M.

2017-01-01

This paper proposes a robust optimization framework for energy hub management. It is well known that the operation of energy systems can be negatively affected by uncertain parameters, such as stochastic load demand or generation. In this regard, it is of high significance to propose efficient...... tools in order to deal with uncertainties and to provide reliable operating conditions. On a broader scale, an energy hub includes diverse energy sources for supplying both electrical load and heating/cooling demands with stochastic behaviors. Therefore, this paper utilizes the Information Decision Gap...

Integrating Usability Evaluations into the Software Development Process

DEFF Research Database (Denmark)

Lizano, Fulvio

as relevant and strategic human–computer interaction (HCI) activities in the software development process, there are obstacles that limit the complete, effective and efficient integration of this kind of testing into the software development process. Two main obstacles are the cost of usability evaluations...... and the software developers' resistance to accepting users’ opinions regarding the lack of usability in their software systems. The ‘cost obstacle’ refers to the constraint of conducting usability evaluations in the software process due to the significant amount of resources required by this type of testing. Some......This thesis addresses the integration of usability evaluations into the software development process. The integration here is contextualized in terms of how to include usability evaluation as an activity in the software development lifecycle. Even though usability evaluations are considered...

Innovation Hub How-To

DEFF Research Database (Denmark)

Berger, Andreas; Brem, Alexander

2016-01-01

in establishing an innovative environment: carefully considering the decision to set up such a center, hiring the right people, designing a framework for effective output, creating a buffer from bureaucratic distractions, securing a leader to champion the effort, focusing on business outcomes, fostering...... disruptive over incremental innovation, and being patient. Regardless of where an innovation hub is established, the key to success lies in hiring creative, intrinsically motivated staff and then giving them the freedom to do what they do best....

Exploring hubness in Regional Trade Agreements

NARCIS (Netherlands)

Vaal, A. de

2016-01-01

In the plethora of Regional Trade Agreements (RTAs) some countries take in a more central position than others in the sense that some countries are much more engaged with other countries through RTAs. Furthermore, the position of some countries is that of a hub: they have (many) trade

From Playability to a Hierarchical Game Usability Model

OpenAIRE

Nacke, Lennart E.

2010-01-01

This paper presents a brief review of current game usability models. This leads to the conception of a high-level game development-centered usability model that integrates current usability approaches in game industry and game research.

Gas and LNG pricing and trading hub in East Asia: An introduction

Directory of Open Access Journals (Sweden)

Xunpeng Shi

2016-10-01

Full Text Available This paper summarizes the four papers in the special issues on ‘Gas and LNG pricing and trading hub in East Asia’. The papers examine lessons and experience from European hub development, other commodity, the Japanese history on developing of futures markets and inter-fuel substitution in East Asia. The papers finds that liquid futures market is the key to formulate benchmark prices while a well-developed spot market is the foundation; political will and strong leadership are required to overcome the power of incumbents and to restructure the gas market that impede the the development of competitive markets; and East Asia needs to develop its indigenous gas or LNG trading hubs even in low oil prices period and its developing market allows easier changes in new contracts than in existing ones. This hub development requires governments to go through tough domestic market reforms, including liberalization and cooperation with each other and with gas exporters.

Medium-term energy hub management subject to electricity price and wind uncertainty

International Nuclear Information System (INIS)

Najafi, Arsalan; Falaghi, Hamid; Contreras, Javier; Ramezani, Maryam

2016-01-01

Highlights: • A new model for medium-term energy hub management is proposed. • Risk aversion is considered in medium-term energy hub management. • Stochastic programing is used to solve the medium-term energy hub management problem. • Electricity price and wind uncertainty are considered. - Abstract: Energy hubs play an important role in implementing multi-carrier energy systems. More studies are required in both their modeling and operating aspects. In this regard, this paper attempts to develop medium-term management of an energy hub in restructured power systems. A model is presented to manage an energy hub which has electrical energy and natural gas as inputs and electrical and heat energy as outputs. Electricity is procured in various ways, either purchasing it from a pool-based market and bilateral contracts, or producing it from a Combined Heat and Power (CHP) unit, a diesel generator unit and Wind Turbine Generators (WTGs). Pool prices and wind turbine production are subject to uncertainty, which makes energy management a complex puzzle. Heat demand is also procured by a furnace and a CHP unit. Energy hub managers should make decisions whether to purchase electricity from the electricity market and gas from the gas network or to produce electricity using a set of generators to meet the electrical and heat demands in the presence of uncertainties. The energy management objective is to minimize the total cost subject to several technical constraints using stochastic programming. Conditional Value at Risk (CVaR), a well-known risk measure, is used to reduce the unfavorable risk of costs. In doing so, the proposed model is illustrated using a sample test case with actual prices, load and wind speed data. The results show that the minimum cost is obtained by the best decisions involving the electricity market and purchasing natural gas for gas facilities. Considering risk also increases the total expected cost and decreases the CVaR.

Usability of PostgreSQL

OpenAIRE

Zeng, Xi

2011-01-01

My topic of the thesis is usability of PostgreSQL. It presents basic information aboutPostgreSQL, such as its history, function, and comparison with one of the most popular databases - MySQL. PostgreSQL has been tested in different environments and with different programming languages. The research is based on the documents from PostgreSQL official website.The thesis introduces and proves the usability and the compatibility of PostgreSQL. PostgreSQL has been installed on Windows workstation a...

Hub network design for sparse travel demand within the African aviation industry

CSIR Research Space (South Africa)

Ssamula, B

2007-07-01

Full Text Available and analysed to reveal that the best option for a hub network is the so-called geo-political network. A geo-political network is where hubs are created in the North, South, East and West of Africa, at airports with strong political influence, high passenger...

A Longitudinal Study of Usability in Health Care

DEFF Research Database (Denmark)

Kjeldskov, Jesper; Skov, Mikael B.; Stage, Jan

2010-01-01

We report from a longitudinal laboratory-based usability evaluation of a health care information system. The purpose of the study was to inquire into the nature of usability problems experienced by novice and expert users, and to see to what extend usability problems of a health care information...... system may or may not disappear over time, as the nurses get more familiar with it-if time heals poor design? As our method for studying this, we conducted a longitudinal study with two key studies. A usability evaluation was conducted with novice users when an electronic patient record system was being......, we discuss implications for evaluating usability in health care....

Active Involvement of Software Developers in Usability Engineering

DEFF Research Database (Denmark)

Bornoe, Nis; Stage, Jan

2017-01-01

The essence of usability evaluations is to produce feedback that supports the downstream utility so the interaction design can be improved and problems can be fixed. In practice, software development organizations experience several obstacles for conducting usability engineering. One suggested...... approach is to train and involve developers in all phases of usability activities from evaluations, to problem reporting, and making redesign proposals. Only limited work has previously investigated the impact of actively involving developers in usability engineering. In this paper, we present two small......, and problem fixing. At the organizational level, we found that the attitude towards and understanding of the role of usability engineering improved....

Design and Analysis of Wind Turbine Blade Hub using Aluminium Alloy AA 6061-T6

Science.gov (United States)

Ravikumar, S.; Jaswanthvenkatram, V.; Sai kumar, Y. J. N. V.; Sohaib, S. Md.

2017-05-01

This work presents the design and analysis of horizontal axis wind turbine blade hub using different material. The hub is very crucial part of the wind turbine, which experience the loads from the blades and the loads were transmitted to the main shaft. At present wind turbine is more expensive and weights more than a million pounds, with the nacelle, rotor hub and blades accounting for most of the weight. In this work Spheroidal graphite cast iron GGG 40.3 is replaced by aluminium alloy 6061-T6 to enhance the casting properties and also to improve the strength-weight ratio. This transition of material leads to reduction in weight of the wind turbine. All the loads caused by wind and extreme loads on the blades are transferred to the hub. Considering the IEC 61400-1 standard for defining extreme loads on the hub the stress and deflection were calculated on the hub by using Finite element Analysis. Result obtained from ANSYS is compared and discussed with the existing design.

PERBANDINGAN METODE EVALUASI USABILITY (STUDI KASUS : PENGGUNAAN PERANGKAT SMARTPHONE)

OpenAIRE

Hendradewa, Andrie Pasca

2017-01-01

Usability is a key factor that determine success of a product or interactive system, like smartphone. The increasing use of smartphone and its rapid technology development, requires usability evaluation method that is more accurate and effective to found usability problem, so it can be used for product improvement in development process. This study suggests a usability evaluation method that is most effective to identify problem in smartphone usage. Three usability evaluation methods that com...

Three Contexts for Evaluating Organizational Usability

DEFF Research Database (Denmark)

Hertzum, Morten

2018-01-01

Organizational usability is about the match between the user and the system, between the organization and the system, and between the environment and the system. While the first of these matches can, to a large extent, be evaluated in the lab, the two others cannot. Organizational usability must......, provide a brief example, and discuss the challenges it presents. To strengthen the focus on evaluation in the three contexts we propose the measurement of specified effects, combined with a sensitivity toward emergent effects. Incorporating effects in the evaluation of organizational usability makes...

KINEMATIC ANALYSES OF THE GOLF SWING HUB PATH AND ITS ROLE IN GOLFER/CLUB KINETIC TRANSFERS

Directory of Open Access Journals (Sweden)

Steven M. Nesbit

2009-06-01

Full Text Available This study analyzed the fundamental geometric and kinematic characteristics of the swing hub path of the golf shot for four diverse subjects. In addition, the role of the hub path geometry in transferring the kinetic quantities from the golfer to the club were investigated. The hub path was found to have a complex geometry with significantly changing radii, and a constantly moving center-of-curvature during the downswing for all subjects. While the size and shape of the hub path differed considerably among the subjects, a three phase radius-based pattern was revealed that aligned with distinct stages of the downswing. Artificially controlling and optimizing the hub path of the better golfer in the group indicated that a non-circular hub path was superior to a constant radius path in minimizing the kinetic loading while generating the highest possible club head velocity. The shape and purpose of the hub path geometry appears to result from a complex combination of achieving equilibrium between the golfer and the club, and a purposeful configuring of the path to control the outward movement of the club while minimizing the kinetic loading on the golfer yet transferring the maximum kinetic quantities to the club. Describing the downswing relative to the hub path phasing is presented and was found to be informative since the phases align with significant swing, kinetic and kinematic markers. These findings challenge golf swing modeling methodologies which fix the center-of-curvature of the hub path thus constraining it to constant radius motion

MATHEMATICAL MODEL FOR SOFTWARE USABILITY AUTOMATED EVALUATION AND ASSURANCE

Directory of Open Access Journals (Sweden)

І. Гученко

2011-04-01

Full Text Available The subject of the research is software usability and the aim is construction of mathematicalmodel of estimation and providing of the set level of usability. Methodology of structural analysis,methods of multicriterion optimization and theory of making decision, method of convolution,scientific methods of analysis and analogies is used in the research. The result of executed work isthe model for software usability automated evaluation and assurance that allows not only toestimate the current level of usability during every iteration of agile development but also tomanage the usability of created software products. Results can be used for the construction ofautomated support systems of management the software usability.

Performance evaluation of small wind turbines for off grid applications in Saudi Arabia

International Nuclear Information System (INIS)

Al-Hadhrami, Luai M.

2014-01-01

Highlights: • Sixteen HAWT and 8 VAWT performance evaluations for s wind measurement site. • HAWT were found to be more efficient than VAWT. • Higher energy yields during high load demands. • PCF’s of up to 54% could be achieved. • Highest energy increase for hub height change from 20 to 30 m. - Abstract: The study evaluated the energy output and plant capacity factor (PCF) of small wind turbines in the category of 1–3 kW, 5–10 kW, 15–20 kW and 50–80 kW rated powers. Furthermore, the effect of hub height on energy output and the PCF has been studied to recommend suitable hub height for different type of applications and load requirements. To achieve the set objectives, hourly average wind speed data measured at 10, 20, 30, and 40 m and wind direction at 30 and 40 m above ground level during July 01, 2006 to July 10, 2008 has been utilized. Highest percentage change in annual energy yield (AEY) was obtained for an increase in hub height of 10 m from 20 to 30 m for both horizontal and vertical wind turbines chosen in the present study. The next best AEY was obtained while increasing hub height from 10 to 15 m. Horizontal axis wind turbines Fortis Passat with PCF of 44.4% at 15 m hub height, Aeolos-H 5 kW with PCF of 20% at 20 m hub height, and CF6e with PCF of 32.5% at 20 m hub height are recommended for different load requirements. Similarly, vertical axis wind turbines UGE Vision 2 kW with PCF of 8.9% at 15 m hub height, Aeolos-V-2 5 kW with PCF of 20.6% at 20 m hub height, and UGE-9M 10 kW with PCF of 14.2% at 30 m hub height are also recommended for various ranges of loads. Horizontal axis wind turbines were found generally more efficient than the vertical axis wind turbines in the present case

Abnormal hubs of white matter networks in the frontal-parieto circuit contribute to depression discrimination via pattern classification.

Science.gov (United States)

Qin, Jiaolong; Wei, Maobin; Liu, Haiyan; Chen, Jianhuai; Yan, Rui; Hua, Lingling; Zhao, Ke; Yao, Zhijian; Lu, Qing

2014-12-01

Previous studies had explored the diagnostic and prognostic value of the structural neuroimaging data of MDD and treated the whole brain voxels, the fractional anisotropy and the structural connectivity as classification features. To our best knowledge, no study examined the potential diagnostic value of the hubs of anatomical brain networks in MDD. The purpose of the current study was to provide an exploratory examination of the potential diagnostic and prognostic values of hubs of white matter brain networks in MDD discrimination and the corresponding impaired hub pattern via a multi-pattern analysis. We constructed white matter brain networks from 29 depressions and 30 healthy controls based on diffusion tensor imaging data, calculated nodal measures and identified hubs. Using these measures as features, two types of feature architectures were established, one only included hubs (HUB) and the other contained both hubs and non hubs. The support vector machine classifiers with Gaussian radial basis kernel were used after the feature selection. Moreover, the relative contribution of the features was estimated by means of the consensus features. Our results presented that the hubs (including the bilateral dorsolateral part of superior frontal gyrus, the left middle frontal gyrus, the bilateral middle temporal gyrus, and the bilateral inferior temporal gyrus) played an important role in distinguishing the depressions from healthy controls with the best accuracy of 83.05%. Moreover, most of the HUB consensus features located in the frontal-parieto circuit. These findings provided evidence that the hubs could be served as valuable potential diagnostic measure for MDD, and the hub-concentrated lesion distribution of MDD was primarily anchored within the frontal-parieto circuit. Copyright © 2014 Elsevier Inc. All rights reserved.

TYPE PROJECTS HUB - AN INTERNATIONAL MODEL OF DEVELOPMENT OF THE ENTREPRENEURIAL ENVIRONMENT

Directory of Open Access Journals (Sweden)

Rozalia Nistor

2014-06-01

Full Text Available Impact Hub is a global network of local spaces and communities designed to facilitate sustainable impact through collaboration. Local Impact Hubs are autonomous companies that offer co-working spaces, programming, events platforms, and communities of individuals and organizations with ideas to build a better world. Hub was established in 2005 in London with the aim of creating a space dedicated to inspire, connect and enable people to achieve a sustainable entrepreneurial idea. The idea was simple: There are a lot of people with good ideas for a "better world". What seem to be missing are places to help these people to move from intent to action and to find like-minded for a greater impact. In Romania about four years ago, first opened in Bucharest office space hubs in Romania (for entrepreneurs in technology and business where teams from different companies could collaborate. The idea to open a hub in Bucharest focused on social innovation and entrepreneurship appeared some time ago in the context in which part of the team now has worked since 2010 at the initiation and growth of a community to support social entrepreneurship. In all this diversity, there is a common mission: “we can create if we put all our innovation capacity in the common goal to create a positive impact through our work?”

Disrupted nodal and hub organization account for brain network abnormalities in Parkinson’s disease

Directory of Open Access Journals (Sweden)

Yuko Koshimori

2016-11-01

Full Text Available The recent application of graph theory to brain networks promises to shed light on complex diseases such as Parkinson’s disease. This study aimed to investigate functional changes in sensorimotor and cognitive networks in parkinsonian patients, with a focus on inter- and intra-connectivity organization in the disease-associated nodal and hub regions using the graph theoretical analyses. Resting-state functional MRI data of a total of 65 participants, including 23 healthy controls and 42 patients, were investigated in 120 nodes for local efficiency, betweenness centrality, and degree. Hub regions were identified in the healthy control and patient groups. We found nodal and hub changes in patients compared with healthy controls, including the right pre-supplementary motor area, left anterior insula, bilateral mid-insula, bilateral dorsolateral prefrontal cortex, and right caudate nucleus. In general, nodal regions within the sensorimotor network (i.e. right pre-supplementary motor area and right mid-insula displayed weakened connectivity, with the former node associated with more severe bradykinesia, and impaired integration with default mode network regions. The left mid-insula also lost its hub properties in patients. Within the executive networks, the left anterior insular cortex lost its hub properties in patients, while a new hub region was identified in the right caudate nucleus, paralleled by an increased level of inter- and intra-connectivity in the bilateral dorsolateral prefrontal cortex possibly representing compensatory mechanisms. These findings highlight the diffuse changes in nodal organization and regional hub disruption accounting for the distributed abnormalities across brain networks and the clinical manifestations of Parkinson’s disease.

Analysis and Modeling of Ground Operations at Hub Airports

Science.gov (United States)

Atkins, Stephen (Technical Monitor); Andersson, Kari; Carr, Francis; Feron, Eric; Hall, William D.

2000-01-01

Building simple and accurate models of hub airports can considerably help one understand airport dynamics, and may provide quantitative estimates of operational airport improvements. In this paper, three models are proposed to capture the dynamics of busy hub airport operations. Two simple queuing models are introduced to capture the taxi-out and taxi-in processes. An integer programming model aimed at representing airline decision-making attempts to capture the dynamics of the aircraft turnaround process. These models can be applied for predictive purposes. They may also be used to evaluate control strategies for improving overall airport efficiency.

A usability evaluation of the prototype Afrikaanse idiome-woordeboek

African Journals Online (AJOL)

When digital tools are developed it is important to consider the usability of the tool. Usability evaluation was done on the Afrikaanse idiome-woordeboek to determine with what success it can be used. Discount usability methods, viz. heuristic evaluation and usability testing were used. This article reports on the findings from ...

Application of hydraulically assembled shaft coupling hubs to large agitators

International Nuclear Information System (INIS)

Murray, W.E.; Anderson, T.D.; Bethmann, H.K.

1991-01-01

This paper describes the basis for and implementation of hydraulically assembled shaft coupling hubs for large tank-mounted agitators. This modification to the original design was intended to minimize maintenance personnel exposure to ionizing radiation and also provide for disassembly capability without damage to shafts or hubs. In addition to realizing these objectives, test confirmed that the modified couplings reduced agitator shaft end runouts approximately 65%, thereby reducing bearing loads and increasing service life, a significant enhancement for a nuclear facility. 5 refs

Why do European companies have Innovation Hubs in Silicon Valley

DEFF Research Database (Denmark)

Berger, Andreas; Brem, Alexander

2017-01-01

Innovation hubs are gaining high attention in recent years, especially from European companies. Silicon Valley has been deemed as one of the most attractive and successful environments for establishing innovation hubs. This article highlights examples of companies from Europe that made the step...... to California—namely, Volkswagen, Swisscom, BMW, Axel Springer, Munich Re, and Innogy SE (RWE Group). Based on these companies’ experiences, recommendations are given on how companies might approach a setup in Silicon Valley for long-term success....

Usability testing for the rest of us: the application of discount usability principles in the development of an online communications assessment application.

Science.gov (United States)

Brock, Douglas; Kim, Sara; Palmer, Odawni; Gallagher, Thomas; Holmboe, Eric

2013-01-01

Usability evaluation provides developers and educators with the means to understand user needs, improve overall product utility, and increase user satisfaction. The application of "discount usability" principles developed to make usability testing more practical and useful may improve user experience at minimal cost and require little existing expertise to conduct. We describe an application of discount usability to a high-fidelity online communications assessment application developed by the University of Washington for the American Board of Internal Medicine. Eight internal medicine physicians completed a discount usability test. Sessions were recorded and the videos analyzed for significant usability concerns. Concerns were identified, summarized, discussed, and prioritized by the authors in collaboration with the software developers before implementing any changes to the interface. Thirty-eight significant usability issues were detected and four technical problems were identified. Each issue was responded to through modification of the software, by providing additional instruction, or delayed for a later version to be developed. Discount usability can be easily implemented in academic developmental activities. Our study resulted in the discovery and remediation of significant user problems, in addition to giving important insight into the novel methods built into the application.

Usability Evaluation of www.budget.com

DEFF Research Database (Denmark)

Bruun, Anders; Jensen, Janne Jul; Skov, Mikael B.

This report presents the results of a usability evaluation of the budget.com website. The evaluation was carried out by a team of 4 HCI experts, and it involved 10 potential users. The evaluation is based on measurement of (1) task completion time, (2) task completion, (3) user satisfaction and (4......) perceived workload. We have also analyzed the user interaction with the website for (5) usability problems. Through the evaluation, we have found the following weaknesses of the website:   Reservation takes considerably more time than promised. The website indicates that a reservation can be made in 60...... is not useful for specific purposes. The user satisfaction is generally low. Except one high and two low scores, the user satisfaction was in the middle range. There are too many severe usability problems. The evaluation identified a considerable number of usability problems. 5 of them were critical which means...

Usability Testing: Too Early? Too Much Talking? Too Many Problems?

DEFF Research Database (Denmark)

Hertzum, Morten

2016-01-01

Usability testing has evolved in response to a search for tests that are cheap, early, easy, and fast. In addition, it accords with a situational definition of usability, such as the one propounded by ISO. By approaching usability from an organizational perspective, this author argues that usabil......Usability testing has evolved in response to a search for tests that are cheap, early, easy, and fast. In addition, it accords with a situational definition of usability, such as the one propounded by ISO. By approaching usability from an organizational perspective, this author argues...... that usability should (also) be evaluated late, that usability professionals should be wary of thinking aloud, and that they should focus more on effects achievement than problem detection....

Apathy towards the Integration of Usability Work

DEFF Research Database (Denmark)

Wale-Kolade, Adeola; Nielsen, Peter Axel

2016-01-01

In this article we report from a case study of a software development organization and we study in particular the developers’ and product managers’ attitudes towards integrating usability work into software development. We offer explanations based on system justification theory illuminating what...... would-be integrators might be up against. The analysis shows how the developers only pay lip service to usability work and how they treat users superficially. It further shows how that leads to stereotyping of usability designers and users in order to preserve status quo, and how internalization...... of inequality between the developers and usability designers rationalizes the preservation of status quo. These findings will have significant implications for managers of software development....

Biaxial wheel/hub test facility. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Fischer, G.; Grubisic, V. [eds.

2000-07-01

The 4{sup th} meeting aims to exchange the experience and knowledge of engineers during several presentations and discussions about new developments required for a reliable, time and cost reducing validation of the wheel/hub assembly. Tremendous development of the wheel performance, described by the ratio of the rated load (kg) versus the wheel weight (kg) had taken place during the last 5000 years. Starting from the ratio of 3 for wooden 2-piece-disc-wheels in Mesopotamia it needed nearly 1000 years to increase the ratio to approx 5 at light-weight spoke wheels for fighting carriages, found in the grave of king Tutenchamon in Egypt. Modern light alloy wheels of commercial vehicles reach values up to 160 kg/kg. Additionally the comlex design of the modern systems for cars and commercial vehicles comprising wheel, brake, hub, bearing, spindle and hub carrier, including different materials and their treatment, fasteners, press-fits, require an appropriate testing procedure. The variable loading conditions, caused by operational wheel forces, brake and torque moments including heating, may result in changing tolerances and press-fits during operation and consequently in different damage mechanisms. This can be simulated in the Biaxial Wheel Test Machine, whereby corresponding load programs are necessary. An overview about all biaxial test machines in usage at the end of 1999 is shown in the introduction. The total number is 17 for cars, 7 for commercial vehicles and 1 for trains. The six presentations of this meeting were consequently concentrated on: (a) recommendations for a standardization of load programs of the German Wheel Committee, (b) the simulation of brake and torque events and (c) the possibility for a numerical stress analyses and fatigue life assessment. (orig./AKF)

Usability evaluations in user-centred design

NARCIS (Netherlands)

Ruyter, de B.E.R.; Vet, de J.H.M.

1997-01-01

Improving usability of consumer applications has been the focus of much research. Estimating the advantage of these efforts, however, still is very cumbersome since evaluating product improvements in terms of their usability requires good measuring methods and tools. In this paper activities in the

Puertos, espacio y globalización: el desarrollo de hubs en México

Directory of Open Access Journals (Sweden)

Carlos Daniel Martner Peyrelongue

2010-01-01

Full Text Available Los puertos hubs se presentan como el nuevo paradigma de desarrollo del transporte y el comercio marítimo internacional en la globalización. Prácticamente todos los países latinoamericanos anuncian megaproyectos para el desarrollo de puertos hubs en sus litorales, generando grandes expectativas de desarrollo regional, con un débil sustento tanto teórico como empírico. En este sentido, el presente trabajo busca contribuir a la caracterización del modelo de puertos hubs en países periféricos dentro de la economíamundo capitalista, aludiendo, en especial, al caso mexicano. Se trata de aportar elementos de análisis para reconocer, a grandes rasgos, las posibilidades del desarrollo de hubs en los litorales mexicanos, desde la perspectiva de los estudios regionales y la geografía del transporte.

Methods of Usability Testing in Libraries Web Sites

Directory of Open Access Journals (Sweden)

Eman Fawzy

2006-03-01

Full Text Available A Study about libraries' web sites evaluation, that is the Usability, the study talking about methods of usability testing and define it, and its important in web sites evaluation, then details the methods of usability: questionnaire, core groups, testing experimental model, cards arrangement, and composed evaluation.

Portable Desktop Apps with GitHub Electron

CERN Multimedia

CERN. Geneva

2016-01-01

Wouldn't it be nice if you could develop applications that work everywhere, regardless of Operating System or Platform? Even better, what if you could employ the same front-end technologies you use for your web/mobile apps? Meet GitHub Electron.

Reusable Software Usability Specifications for mHealth Applications.

Science.gov (United States)

Cruz Zapata, Belén; Fernández-Alemán, José Luis; Toval, Ambrosio; Idri, Ali

2018-01-25

One of the key factors for the adoption of mobile technologies, and in particular of mobile health applications, is usability. A usable application will be easier to use and understand by users, and will improve user's interaction with it. This paper proposes a software requirements catalog for usable mobile health applications, which can be used for the development of new applications, or the evaluation of existing ones. The catalog is based on the main identified sources in literature on usability and mobile health applications. Our catalog was organized according to the ISO/IEC/IEEE 29148:2011 standard and follows the SIREN methodology to create reusable catalogs. The applicability of the catalog was verified by the creation of an audit method, which was used to perform the evaluation of a real app, S Health, application created by Samsung Electronics Co. The usability requirements catalog, along with the audit method, identified several usability flaws on the evaluated app, which scored 83%. Some flaws were detected in the app related to the navigation pattern. Some more issues related to the startup experience, empty screens or writing style were also found. The way a user navigates through an application improves or deteriorates user's experience with the application. We proposed a reusable usability catalog and an audit method. This proposal was used to evaluate a mobile health application. An audit report was created with the usability issues identified on the evaluated application.

A novel method to identify hub pathways of rheumatoid arthritis based on differential pathway networks.

Science.gov (United States)

Wei, Shi-Tong; Sun, Yong-Hua; Zong, Shi-Hua

2017-09-01

The aim of the current study was to identify hub pathways of rheumatoid arthritis (RA) using a novel method based on differential pathway network (DPN) analysis. The present study proposed a DPN where protein‑protein interaction (PPI) network was integrated with pathway‑pathway interactions. Pathway data was obtained from background PPI network and the Reactome pathway database. Subsequently, pathway interactions were extracted from the pathway data by building randomized gene‑gene interactions and a weight value was assigned to each pathway interaction using Spearman correlation coefficient (SCC) to identify differential pathway interactions. Differential pathway interactions were visualized using Cytoscape to construct a DPN. Topological analysis was conducted to identify hub pathways that possessed the top 5% degree distribution of DPN. Modules of DPN were mined according to ClusterONE. A total of 855 pathways were selected to build pathway interactions. By filtrating pathway interactions of weight values >0.7, a DPN with 312 nodes and 791 edges was obtained. Topological degree analysis revealed 15 hub pathways, such as heparan sulfate/heparin‑glycosaminoglycan (HS‑GAG) degradation, HS‑GAG metabolism and keratan sulfate degradation for RA based on DPN. Furthermore, hub pathways were also important in modules, which validated the significance of hub pathways. In conclusion, the proposed method is a computationally efficient way to identify hub pathways of RA, which identified 15 hub pathways that may be potential biomarkers and provide insight to future investigation and treatment of RA.

Hub location problems in transportation networks

DEFF Research Database (Denmark)

Gelareh, Shahin; Nickel, Stefan

2011-01-01

In this paper we propose a 4-index formulation for the uncapacitated multiple allocation hub location problem tailored for urban transport and liner shipping network design. This formulation is very tight and most of the tractable instances for MIP solvers are optimally solvable at the root node....... also introduce fixed cost values for Australian Post (AP) dataset....

Role of governance in creating a commodity hub: A comparative analysis

Directory of Open Access Journals (Sweden)

M.P. Haris

2016-10-01

Full Text Available The body of work on natural gas hubs has been expanding rapidly in recent years, with most of the current work examining the creation of gas hubs focusing on either the European experience or the North American experience. In this paper, we adopt a different perspective and place the focus on experience of hub building from other international commodities. We analyse three commodities - crude oil, iron ore and coal, and draw experience on the role of governance in development of hub based prices. In particular, we propose that the role of governance is different at different stages of the pricing transition to market based pricing. Governance could play an important role at the initial stage, building the relevant soft and physical infrastructure which facilitates the reaping of first mover advantage. As the market develops, private sector players may prefer less involvement of governance, which may distort markets. With market stabilization, governance should be focused on maintaining stable rules and regulation for private sector development, as well as monitoring for further changes in global trends. To facilitate the building of a benchmark price, the public sector should adopt a long-term and overarching view on industry growth.

A continuous usability evaluation of an electronic medication administration record application.

Science.gov (United States)

Vicente Oliveros, Noelia; Gramage Caro, Teresa; Pérez Menéndez-Conde, Covadonga; Álvarez-Diaz, Ana María; Martín-Aragón Álvarez, Sagrario; Bermejo Vicedo, Teresa; Delgado Silveira, Eva

2017-12-01

The complexity of an electronic medication administration record (eMAR) has been underestimated by most designers in the past. Usability issues, such as poorly designed user application flow in eMAR, are therefore of vital importance, since they can have a negative impact on nursing activities and result in poor outcomes. The purpose of this study was to evaluate the usability of an eMAR application during its development. A usability evaluation was conducted during the development of the eMAR application. Two usability methods were used: a heuristic evaluation complemented by usability testing. Each eMAR application version provided by the vendor was evaluated by 2 hospital pharmacists, who applied the heuristic method. They reviewed the eMAR tasks, detected usability problems and their heuristic violations, and rated the severity of the usability problems. Usability testing was used to assess the final application version by observing how 3 nurses interacted with the application. Thirty-four versions were assessed before the eMAR application was considered usable. During the heuristic evaluation, the usability problems decreased from 46 unique usability problems in version 1 (V1) to 9 in version 34 (V34). In V1, usability problems were categorized into 154 heuristic violations, which decreased to 27 in V34. The average severity rating also decreased from major usability problem (2.96) to no problem (0.23). During usability testing, the 3 nurses did not encounter new usability problems. A thorough heuristic evaluation is a good method for obtaining a usable eMAR application. This evaluation points key areas for improvement and decreases usability problems and their severity. © 2017 John Wiley & Sons, Ltd.

Excitatory Neuronal Hubs Configure Multisensory Integration of Slow Waves in Association Cortex

Directory of Open Access Journals (Sweden)

Satoshi Kuroki

2018-03-01

Full Text Available Summary: Multisensory integration (MSI is a fundamental emergent property of the mammalian brain. During MSI, perceptual information encoded in patterned activity is processed in multimodal association cortex. The systems-level neuronal dynamics that coordinate MSI, however, are unknown. Here, we demonstrate intrinsic hub-like network activity in the association cortex that regulates MSI. We engineered calcium reporter mouse lines based on the fluorescence resonance energy transfer sensor yellow cameleon (YC2.60 expressed in excitatory or inhibitory neurons. In medial and parietal association cortex, we observed spontaneous slow waves that self-organized into hubs defined by long-range excitatory and local inhibitory circuits. Unlike directional source/sink-like flows in sensory areas, medial/parietal excitatory and inhibitory hubs had net-zero balanced inputs. Remarkably, multisensory stimulation triggered rapid phase-locking mainly of excitatory hub activity persisting for seconds after the stimulus offset. Therefore, association cortex tends to form balanced excitatory networks that configure slow-wave phase-locking for MSI. Video Abstract: : Kuroki et al. performed cell-type-specific, wide-field FRET-based calcium imaging to visualize cortical network activity induced by multisensory inputs. They observed phase-locking of cortical slow waves in excitatory neuronal hubs in association cortical areas that may underlie multisensory integration. Keywords: wide-field calcium imaging, multisensory integration, cortical slow waves, association cortex, phase locking, fluorescence resonance energy transfer, spontaneous activity, excitatory neuron, inhibitory neuron, mouse

Usability Evaluation of a Web-Based Learning System

Science.gov (United States)

Nguyen, Thao

2012-01-01

The paper proposes a contingent, learner-centred usability evaluation method and a prototype tool of such systems. This is a new usability evaluation method for web-based learning systems using a set of empirically-supported usability factors and can be done effectively with limited resources. During the evaluation process, the method allows for…

Extraversion modulates functional connectivity hubs of resting-state brain networks.

Science.gov (United States)

Pang, Yajing; Cui, Qian; Duan, Xujun; Chen, Heng; Zeng, Ling; Zhang, Zhiqiang; Lu, Guangming; Chen, Huafu

2017-09-01

Personality dimension extraversion describes individual differences in social behaviour and socio-emotional functioning. The intrinsic functional connectivity patterns of the brain are reportedly associated with extraversion. However, whether or not extraversion is associated with functional hubs warrants clarification. Functional hubs are involved in the rapid integration of neural processing, and their dysfunction contributes to the development of neuropsychiatric disorders. In this study, we employed the functional connectivity density (FCD) method for the first time to distinguish the energy-efficient hubs associated with extraversion. The resting-state functional magnetic resonance imaging data of 71 healthy subjects were used in the analysis. Short-range FCD was positively correlated with extraversion in the left cuneus, revealing a link between the local functional activity of this region and extraversion in risk-taking. Long-range FCD was negatively correlated with extraversion in the right superior frontal gyrus and the inferior frontal gyrus. Seed-based resting-state functional connectivity (RSFC) analyses revealed that a decreased long-range FCD in individuals with high extraversion scores showed a low long-range functional connectivity pattern between the medial and dorsolateral prefrontal cortex, middle temporal gyrus, and anterior cingulate cortex. This result suggests that decreased RSFC patterns are responsible for self-esteem, self-evaluation, and inhibitory behaviour system that account for the modulation and shaping of extraversion. Overall, our results emphasize specific brain hubs, and reveal long-range functional connections in relation to extraversion, thereby providing a neurobiological basis of extraversion. © 2015 The British Psychological Society.

PERSEUS-HUB: Interactive and Collective Exploration of Large-Scale Graphs

Directory of Open Access Journals (Sweden)

Di Jin

2017-07-01

Full Text Available Graphs emerge naturally in many domains, such as social science, neuroscience, transportation engineering, and more. In many cases, such graphs have millions or billions of nodes and edges, and their sizes increase daily at a fast pace. How can researchers from various domains explore large graphs interactively and efficiently to find out what is ‘important’? How can multiple researchers explore a new graph dataset collectively and “help” each other with their findings? In this article, we present Perseus-Hub, a large-scale graph mining tool that computes a set of graph properties in a distributed manner, performs ensemble, multi-view anomaly detection to highlight regions that are worth investigating, and provides users with uncluttered visualization and easy interaction with complex graph statistics. Perseus-Hub uses a Spark cluster to calculate various statistics of large-scale graphs efficiently, and aggregates the results in a summary on the master node to support interactive user exploration. In Perseus-Hub, the visualized distributions of graph statistics provide preliminary analysis to understand a graph. To perform a deeper analysis, users with little prior knowledge can leverage patterns (e.g., spikes in the power-law degree distribution marked by other users or experts. Moreover, Perseus-Hub guides users to regions of interest by highlighting anomalous nodes and helps users establish a more comprehensive understanding about the graph at hand. We demonstrate our system through the case study on real, large-scale networks.

The evolution of the MasAgro hubs

NARCIS (Netherlands)

Camacho-Villa, Tania Carolina; Almekinders, Conny; Hellin, Jon; Martinez-Cruz, Tania Eulalia; Rendon-Medel, Roberto; Guevara-Hernández, Francisco; Beuchelt, Tina D.; Govaerts, Bram

2016-01-01

Purpose: Little is known about effective ways to operationalize agricultural innovation processes. We use the MasAgro program in Mexico (which aims to increase maize and wheat productivity, profitability and sustainability), and the experiences of middle level ‘hub managers’, to understand how

Usability and Gratifications--Towards a Website Analysis Model.

Science.gov (United States)

Bunz, Ulla K.

This paper discusses Web site usability issues. Specifically, it assumes that the usability of a Web site depends more on the perception of the user than on the objectively assessable usability criteria of the Web site. Two pilot studies, based on theoretical notions of uses and gratifications theory and similar theories, are presented. In the…

Mobile Usability Testing in Healthcare: Methodological Approaches.

Science.gov (United States)

Borycki, Elizabeth M; Monkman, Helen; Griffith, Janessa; Kushniruk, Andre W

2015-01-01

The use of mobile devices and healthcare applications is increasing exponentially worldwide. This has lead to the need for the healthcare industry to develop a better understanding of the impact of the usability of mobile software and hardware upon consumer and health professional adoption and use of these technologies. There are many methodological approaches that can be employed in conducting usability evaluation of mobile technologies. More obtrusive approaches to collecting study data may lead to changes in study participant behaviour, leading to study results that are less consistent with how the technologies will be used in the real-world. Alternatively, less obstrusive methods used in evaluating the usability of mobile software and hardware in-situ and laboratory settings can lead to less detailed information being collected about how an individual interacts with both the software and hardware. In this paper we review and discuss several innovative mobile usability evaluation methods on a contiuum from least to most obtrusive and their effects on the quality of the usability data collected. The strengths and limitations of methods are also discussed.

Evaluation Methods on Usability of M-Learning Environments

Directory of Open Access Journals (Sweden)

Teresa Magal-Royo

2007-10-01

Full Text Available Nowadays there are different evaluation methods focused in the assessment of the usability of telematic methods. The assessment of 3rd generation web environments evaluates the effectiveness and usability of application with regard to the user needs. Wireless usability and, specifically in mobile phones, is concentrated in the validation of the features and tools management using conventional interactive environments. There is not a specific and suitable criterion to evaluate created environments and m-learning platforms, where the restricted and sequential representation is a fundamental aspect to be considered.The present paper exposes the importance of the conventional usability methods to verify both: the employed contents in wireless formats, and the possible interfaces from the conception phases, to the validations of the platform with such characteristics.The development of usability adapted inspection could be complemented with the Remote’s techniques of usability testing, which are being carried out these days in the mobile devices field and which pointed out the need to apply common criteria in the validation of non-located learning scenarios.

Usability and Accessibility of Air Force Intranet Web Sites

National Research Council Canada - National Science Library

Bentley, Richard S

2006-01-01

.... The Technology Acceptance Model suggests that information systems must not only be useful but also be usable and a large body of usability engineering knowledge exists to support usable design. In addition, the U.S...

76 FR 10328 - Grant of Authority for Subzone Status; Vestas Nacelles America, Inc. (Wind Turbine Nacelles, Hubs...

Science.gov (United States)

2011-02-24

... Status; Vestas Nacelles America, Inc. (Wind Turbine Nacelles, Hubs, Blades and Towers), Brighton, Denver...-purpose subzone at the wind turbine nacelle, hub, blade and tower manufacturing and warehousing facilities... status for activity related to the manufacturing and warehousing of wind turbine nacelles, hubs, blades...

78 FR 20314 - Jefferson Island Storage & Hub, L.L.C.; Notice of Filing

Science.gov (United States)

2013-04-04

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PR13-44-000] Jefferson Island Storage & Hub, L.L.C.; Notice of Filing Take notice that on March 28, 2013, Jefferson Island Storage & Hub, L.L.C. filed to revise its Statement of Operating Conditions to among others, update...

When Is Hub Gene Selection Better than Standard Meta-Analysis?

Science.gov (United States)

Langfelder, Peter; Mischel, Paul S.; Horvath, Steve

2013-01-01

Since hub nodes have been found to play important roles in many networks, highly connected hub genes are expected to play an important role in biology as well. However, the empirical evidence remains ambiguous. An open question is whether (or when) hub gene selection leads to more meaningful gene lists than a standard statistical analysis based on significance testing when analyzing genomic data sets (e.g., gene expression or DNA methylation data). Here we address this question for the special case when multiple genomic data sets are available. This is of great practical importance since for many research questions multiple data sets are publicly available. In this case, the data analyst can decide between a standard statistical approach (e.g., based on meta-analysis) and a co-expression network analysis approach that selects intramodular hubs in consensus modules. We assess the performance of these two types of approaches according to two criteria. The first criterion evaluates the biological insights gained and is relevant in basic research. The second criterion evaluates the validation success (reproducibility) in independent data sets and often applies in clinical diagnostic or prognostic applications. We compare meta-analysis with consensus network analysis based on weighted correlation network analysis (WGCNA) in three comprehensive and unbiased empirical studies: (1) Finding genes predictive of lung cancer survival, (2) finding methylation markers related to age, and (3) finding mouse genes related to total cholesterol. The results demonstrate that intramodular hub gene status with respect to consensus modules is more useful than a meta-analysis p-value when identifying biologically meaningful gene lists (reflecting criterion 1). However, standard meta-analysis methods perform as good as (if not better than) a consensus network approach in terms of validation success (criterion 2). The article also reports a comparison of meta-analysis techniques applied to

When is hub gene selection better than standard meta-analysis?

Directory of Open Access Journals (Sweden)

Peter Langfelder

Full Text Available Since hub nodes have been found to play important roles in many networks, highly connected hub genes are expected to play an important role in biology as well. However, the empirical evidence remains ambiguous. An open question is whether (or when hub gene selection leads to more meaningful gene lists than a standard statistical analysis based on significance testing when analyzing genomic data sets (e.g., gene expression or DNA methylation data. Here we address this question for the special case when multiple genomic data sets are available. This is of great practical importance since for many research questions multiple data sets are publicly available. In this case, the data analyst can decide between a standard statistical approach (e.g., based on meta-analysis and a co-expression network analysis approach that selects intramodular hubs in consensus modules. We assess the performance of these two types of approaches according to two criteria. The first criterion evaluates the biological insights gained and is relevant in basic research. The second criterion evaluates the validation success (reproducibility in independent data sets and often applies in clinical diagnostic or prognostic applications. We compare meta-analysis with consensus network analysis based on weighted correlation network analysis (WGCNA in three comprehensive and unbiased empirical studies: (1 Finding genes predictive of lung cancer survival, (2 finding methylation markers related to age, and (3 finding mouse genes related to total cholesterol. The results demonstrate that intramodular hub gene status with respect to consensus modules is more useful than a meta-analysis p-value when identifying biologically meaningful gene lists (reflecting criterion 1. However, standard meta-analysis methods perform as good as (if not better than a consensus network approach in terms of validation success (criterion 2. The article also reports a comparison of meta-analysis techniques

When is hub gene selection better than standard meta-analysis?

Science.gov (United States)

Langfelder, Peter; Mischel, Paul S; Horvath, Steve

2013-01-01

Since hub nodes have been found to play important roles in many networks, highly connected hub genes are expected to play an important role in biology as well. However, the empirical evidence remains ambiguous. An open question is whether (or when) hub gene selection leads to more meaningful gene lists than a standard statistical analysis based on significance testing when analyzing genomic data sets (e.g., gene expression or DNA methylation data). Here we address this question for the special case when multiple genomic data sets are available. This is of great practical importance since for many research questions multiple data sets are publicly available. In this case, the data analyst can decide between a standard statistical approach (e.g., based on meta-analysis) and a co-expression network analysis approach that selects intramodular hubs in consensus modules. We assess the performance of these two types of approaches according to two criteria. The first criterion evaluates the biological insights gained and is relevant in basic research. The second criterion evaluates the validation success (reproducibility) in independent data sets and often applies in clinical diagnostic or prognostic applications. We compare meta-analysis with consensus network analysis based on weighted correlation network analysis (WGCNA) in three comprehensive and unbiased empirical studies: (1) Finding genes predictive of lung cancer survival, (2) finding methylation markers related to age, and (3) finding mouse genes related to total cholesterol. The results demonstrate that intramodular hub gene status with respect to consensus modules is more useful than a meta-analysis p-value when identifying biologically meaningful gene lists (reflecting criterion 1). However, standard meta-analysis methods perform as good as (if not better than) a consensus network approach in terms of validation success (criterion 2). The article also reports a comparison of meta-analysis techniques applied to

The East African Resilience Innovation Hub | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

Project leadership The Resilience Innovation Hub will be housed within a ... Region at the Levy Mwanawasa Regional Centre, Lusaka -Conflict Early Warning and ... Authority on Development, Addis Ababa This initiative will support innovative ...

Virtual Hubs for facilitating access to Open Data

Science.gov (United States)

Mazzetti, Paolo; Latre, Miguel Á.; Ernst, Julia; Brumana, Raffaella; Brauman, Stefan; Nativi, Stefano

2015-04-01

In October 2014 the ENERGIC-OD (European NEtwork for Redistributing Geospatial Information to user Communities - Open Data) project, funded by the European Union under the Competitiveness and Innovation framework Programme (CIP), has started. In response to the EU call, the general objective of the project is to "facilitate the use of open (freely available) geographic data from different sources for the creation of innovative applications and services through the creation of Virtual Hubs". In ENERGIC-OD, Virtual Hubs are conceived as information systems supporting the full life cycle of Open Data: publishing, discovery and access. They facilitate the use of Open Data by lowering and possibly removing the main barriers which hampers geo-information (GI) usage by end-users and application developers. Data and data services heterogeneity is recognized as one of the major barriers to Open Data (re-)use. It imposes end-users and developers to spend a lot of effort in accessing different infrastructures and harmonizing datasets. Such heterogeneity cannot be completely removed through the adoption of standard specifications for service interfaces, metadata and data models, since different infrastructures adopt different standards to answer to specific challenges and to address specific use-cases. Thus, beyond a certain extent, heterogeneity is irreducible especially in interdisciplinary contexts. ENERGIC-OD Virtual Hubs address heterogeneity adopting a mediation and brokering approach: specific components (brokers) are dedicated to harmonize service interfaces, metadata and data models, enabling seamless discovery and access to heterogeneous infrastructures and datasets. As an innovation project, ENERGIC-OD will integrate several existing technologies to implement Virtual Hubs as single points of access to geospatial datasets provided by new or existing platforms and infrastructures, including INSPIRE-compliant systems and Copernicus services. ENERGIC OD will deploy a

A Framework for Usability Evaluation in EHR Procurement.

Science.gov (United States)

Tyllinen, Mari; Kaipio, Johanna; Lääveri, Tinja

2018-01-01

Usability should be considered already by the procuring organizations when selecting future systems. In this paper, we present a framework for usability evaluation during electronic health record (EHR) system procurement. We describe the objectives of the evaluation, the procedure, selected usability attributes and the evaluation methods to measure them. We also present the emphasis usability had in the selection process. We do not elaborate on the details of the results, the application of methods or gathering of data. Instead we focus on the components of the framework to inform and give an example to other similar procurement projects.

Emerging Education Hubs: The Case of Singapore

Science.gov (United States)

Sidhu, Ravinder; Ho, K.-C.; Yeoh, Brenda

2011-01-01

In anticipation of a globalising post-Fordist political economy, countries and universities are increasingly pursuing strategic transnational education and research alliances. This article analyses the Global Schoolhouse, a key education policy platform that aims to transform Singapore into a knowledge and innovation hub by establishing networks…

Meta-Analysis of Correlations Among Usability Measures

DEFF Research Database (Denmark)

Hornbæk, Kasper Anders Søren; Effie Lai Chong, Law

2007-01-01

are generally low: effectiveness measures (e.g., errors) and efficiency measures (e.g., time) has a correlation of .247 ± .059 (Pearson's product-moment correlation with 95% confidence interval), efficiency and satisfaction (e.g., preference) one of .196 ± .064, and effectiveness and satisfaction one of .164......Understanding the relation between usability measures seems crucial to deepen our conception of usability and to select the right measures for usability studies. We present a meta-analysis of correlations among usability measures calculated from the raw data of 73 studies. Correlations...... ± .062. Changes in task complexity do not influence these correlations, but use of more complex measures attenuates them. Standard questionnaires for measuring satisfaction appear more reliable than homegrown ones. Measures of users' perceptions of phenomena are generally not correlated with objective...

Waves, currents and sediment transport modelling at the Wave Hub site

OpenAIRE

Gonzalez-Santamaria, Raul

2013-01-01

Primary supervisory team: Qingping Zou and Shunqi Pan This research project uses an integrated modelling system to investigate the effects of a wave farm on nearshore sediment transport at the Wave Hub site. The Wave Hub project is a large scale demonstration site for the development of the operation of arrays of wave energy generation devices located at the southwest coast of the UK where multiple field measurements took place. Particular attention of this study was paid to th...

Intra- and Inter-Cultural Usability in Computer-Supported Collaboration

DEFF Research Database (Denmark)

Vatrapu, Ravi; Suthers, Dan

2010-01-01

In this paper, we argue for an increased scope of universal design to encompass usability and accessibility for not only users with physical disabilities but also for users from different cultures. Towards this end, we present an empirical evaluation of cultural usability in computer......-Chinese, and Chinese-Chinese) appropriated affordances and produced technological intersubjectivity. Cultural usability was analyzed through the use of performance and satisfaction measures. The results show a systemic variation in efficiency, effectiveness, and satisfaction between the two cultural groups....... Implications of these findings for the research and practice of usability, in general, and cultural usability, in particular, are discussed in this paper....

Evaluation of Usability Utilizing Markov Models

Science.gov (United States)

Penedo, Janaina Rodrigues; Diniz, Morganna; Ferreira, Simone Bacellar Leal; Silveira, Denis S.; Capra, Eliane

2012-01-01

Purpose: The purpose of this paper is to analyze the usability of a remote learning system in its initial development phase, using a quantitative usability evaluation method through Markov models. Design/methodology/approach: The paper opted for an exploratory study. The data of interest of the research correspond to the possible accesses of users…

Usability evaluation techniques in mobile commerce applications: A systematic review

Science.gov (United States)

Hussain, Azham; Mkpojiogu, Emmanuel O. C.

2016-08-01

Obviously, there are a number of literatures concerning the usability of mobile commerce (m-commerce) applications and related areas, but they do not adequately provide knowledge about usability techniques used in most of the empirical usability evaluation for m-commerce application. Therefore, this paper is aimed at producing the usability techniques frequently used in the aspect of usability evaluation for m-commerce applications. To achieve the stated objective, systematic literature review was employed. Sixty seven papers were downloaded in usability evaluation for m-commerce and related areas; twenty one most relevant studies were selected for review in order to extract the appropriate information. The results from the review shows that heuristic evaluation, formal test and think aloud methods are the most commonly used methods in m-commerce application in comparison to cognitive walkthrough and the informal test methods. Moreover, most of the studies applied control experiment (33.3% of the total studies); other studies that applied case study for usability evaluation are 14.28%. The results from this paper provide additional knowledge to the usability practitioners and research community for the current state and use of usability techniques in m-commerce application.

Usability in a cultural context

DEFF Research Database (Denmark)

Clemmensen, Torkil; Yammiyavar, Pradeep; Ørngreen, Rikke

2010-01-01

This paper focuses on presenting and discussing the aim, context, challenges, results, and impact of the Cultural usability project named as CultUsab. This project was a four year international research effort from 2006 to 2009, which was supported by a grant for the Danish Research Councils...... for Independent Research in Culture and Communication. The project aimed at innovating processes in Information and Communication Technology development through an understanding of culturally sensitive aspects of usability evaluation methods....

Hubs and spokes in Regional Trade Agreements

NARCIS (Netherlands)

Vaal, A. de

2017-01-01

In the plethora of Regional Trade Agreements (RTAs) some countries are involved in much more RTAs than others. Furthermore, some countries take in a position as a hub: they have trade agreements with many other countries, while their partner countries are much less involved in RTA relations. Even

Why Citizen Science Without Usability Testing Will Underperform

Science.gov (United States)

Romano, C.; Gay, P.; Owens, R.; Burlea, G.

2017-12-01

Citizen science projects must undergo usability testing and optimization if they are to meet their stated goals. This presentation will include video of usability tests conducted upon citizen science websites. Usability testing is essential to the success of online interaction, however, citizen science projects have just begun to include this critical activity. Interaction standards in citizen science lag behind those of commercial interests, and published research on this topic is limited. Since online citizen science is by definition, an exchange of information, a clear understanding of how users experience an online project is essential to informed decision-making. Usability testing provides that insight. Usability testing collects data via direct observation of a person while she interacts with a digital product, such as a citizen science website. The test participant verbalizes her thoughts while using the website or application; the moderator follows the participant and captures quantitative measurement of the participant's confidence of success as she advances through the citizen science project. Over 15 years of usability testing, we have observed that users who do not report a consistent sense of progress are likely to abandon a website after as few as three unrewarding interactions. Since citizen science is also a voluntary activity, ensuring seamless interaction for users is mandatory. Usability studies conducted on citizen science websites demonstrate that project teams frequently underestimate a user's need for context and ease of use. Without usability testing, risks to online citizen science projects include high bounce rate (users leave the website without taking any action), abandonment (of the website, tutorials, registration), misunderstanding instructions (causing disorientation and erroneous conclusions), and ultimately, underperforming projects.

Usability Evaluation of Public Web Mapping Sites

Science.gov (United States)

Wang, C.

2014-04-01

Web mapping sites are interactive maps that are accessed via Webpages. With the rapid development of Internet and Geographic Information System (GIS) field, public web mapping sites are not foreign to people. Nowadays, people use these web mapping sites for various reasons, in that increasing maps and related map services of web mapping sites are freely available for end users. Thus, increased users of web mapping sites led to more usability studies. Usability Engineering (UE), for instance, is an approach for analyzing and improving the usability of websites through examining and evaluating an interface. In this research, UE method was employed to explore usability problems of four public web mapping sites, analyze the problems quantitatively and provide guidelines for future design based on the test results. Firstly, the development progress for usability studies were described, and simultaneously several usability evaluation methods such as Usability Engineering (UE), User-Centered Design (UCD) and Human-Computer Interaction (HCI) were generally introduced. Then the method and procedure of experiments for the usability test were presented in detail. In this usability evaluation experiment, four public web mapping sites (Google Maps, Bing maps, Mapquest, Yahoo Maps) were chosen as the testing websites. And 42 people, who having different GIS skills (test users or experts), gender (male or female), age and nationality, participated in this test to complete the several test tasks in different teams. The test comprised three parts: a pretest background information questionnaire, several test tasks for quantitative statistics and progress analysis, and a posttest questionnaire. The pretest and posttest questionnaires focused on gaining the verbal explanation of their actions qualitatively. And the design for test tasks targeted at gathering quantitative data for the errors and problems of the websites. Then, the results mainly from the test part were analyzed. The

Usability: Human Research Program - Space Human Factors and Habitability

Science.gov (United States)

Sandor, Aniko; Holden, Kritina L.

2009-01-01

The Usability project addresses the need for research in the area of metrics and methodologies used in hardware and software usability testing in order to define quantifiable and verifiable usability requirements. A usability test is a human-in-the-loop evaluation where a participant works through a realistic set of representative tasks using the hardware/software under investigation. The purpose of this research is to define metrics and methodologies for measuring and verifying usability in the aerospace domain in accordance with FY09 focus on errors, consistency, and mobility/maneuverability. Usability metrics must be predictive of success with the interfaces, must be easy to obtain and/or calculate, and must meet the intent of current Human Systems Integration Requirements (HSIR). Methodologies must work within the constraints of the aerospace domain, be cost and time efficient, and be able to be applied without extensive specialized training.

Usability Evaluation for Business Intelligence Applications: A User Support Perspective

Directory of Open Access Journals (Sweden)

Chrisna Jooste

2014-08-01

Full Text Available Business Intelligence (BI applications provide business information to drive decision support. Usability is one of the factors determining the optimal use and eventual benefit derived from BI applications. The documented need for more BI usability research together with the practical necessity for BI evaluation guidelines in the mining industry provides the rationale for this study. The purpose of the study was to investigate the usability evaluation of BI applications in the context of a coal mining organization. The research is guided by the question: How can existing usability criteria be customized to evaluate the usability of BI applications. The research design included user observation, heuristic evaluation and a survey. Based on observations made during user support on a BI application used at a coal mining organization a log of usability issues was compiled. The usability issues extracted from this log was compared and contrasted with general usability criteria from literature to synthesize an initial set of BI usability evaluation criteria. These criteria were used as the basis for a heuristic evaluation of the BI application used at the coal mining organization. The same BI application was also evaluated using the Software Usability Measurement Inventory (SUMI standardized questionnaire. The results from the two evaluations were triangulated and then compared with the BI user issues again to contextualize the findings and synthesize a validated and refined set of criteria. The main contribution of the study is the usability evaluation criteria for BI applications presented as guidelines. These guidelines deviate from existing evaluation guidelines in the emphasis on information architecture, learnability and operability.

Publishing and sharing of hydrologic models through WaterHUB

Science.gov (United States)

Merwade, V.; Ruddell, B. L.; Song, C.; Zhao, L.; Kim, J.; Assi, A.

2011-12-01

Most hydrologists use hydrologic models to simulate the hydrologic processes to understand hydrologic pathways and fluxes for research, decision making and engineering design. Once these tasks are complete including publication of results, the models generally are not published or made available to the public for further use and improvement. Although publication or sharing of models is not required for journal publications, sharing of models may open doors for new collaborations, and avoids duplication of efforts if other researchers are interested in simulating a particular watershed for which a model already exists. For researchers, who are interested in sharing models, there are limited avenues to publishing their models to the wider community. Towards filling this gap, a prototype cyberinfrastructure (CI), called WaterHUB, is developed for sharing hydrologic data and modeling tools in an interactive environment. To test the utility of WaterHUB for sharing hydrologic models, a system to publish and share SWAT (Soil Water Assessment Tool) is developed. Users can utilize WaterHUB to search and download existing SWAT models, and also upload new SWAT models. Metadata such as the name of the watershed, name of the person or agency who developed the model, simulation period, time step, and list of calibrated parameters also published with individual model.

Educational software usability: Artifact or Design?

Science.gov (United States)

Van Nuland, Sonya E; Eagleson, Roy; Rogers, Kem A

2017-03-01

Online educational technologies and e-learning tools are providing new opportunities for students to learn worldwide, and they continue to play an important role in anatomical sciences education. Yet, as we shift to teaching online, particularly within the anatomical sciences, it has become apparent that e-learning tool success is based on more than just user satisfaction and preliminary learning outcomes-rather it is a multidimensional construct that should be addressed from an integrated perspective. The efficiency, effectiveness and satisfaction with which a user can navigate an e-learning tool is known as usability, and represents a construct which we propose can be used to quantitatively evaluate e-learning tool success. To assess the usability of an e-learning tool, usability testing should be employed during the design and development phases (i.e., prior to its release to users) as well as during its delivery (i.e., following its release to users). However, both the commercial educational software industry and individual academic developers in the anatomical sciences have overlooked the added value of additional usability testing. Reducing learner frustration and anxiety during e-learning tool use is essential in ensuring e-learning tool success, and will require a commitment on the part of the developers to engage in usability testing during all stages of an e-learning tool's life cycle. Anat Sci Educ 10: 190-199. © 2016 American Association of Anatomists. © 2016 American Association of Anatomists.

Mapping the changed hubs and corresponding functional connectivity in idiopathic restless legs syndrome.

Science.gov (United States)

Liu, Chunyan; Wang, Jiaojian; Hou, Yue; Qi, Zhigang; Wang, Li; Zhan, Shuqin; Wang, Rong; Wang, Yuping

2018-05-01

The hubs of the brain network play a key role in integrating and transferring information between different functional modules. However, whether the changed pattern in functional network hubs contributes to the onset of leg discomfort symptoms in restless legs syndrome (RLS) patients remains unclear. Using resting-state functional magnetic resonance imaging (rs-fMRI) and graph theory methods, we investigated whether alterations of hubs can be detected in RLS. First, we constructed the whole-brain voxelwise functional connectivity and calculated a functional connectivity strength (FCS) map in each of 16 drug-naive idiopathic RLS patients and 26 gender- and age-matched healthy control (HC) subjects. Next, a two-sample t test was applied to compare the FCS maps between HC and RLS patients, and to identify significant changes in FCS in RLS patients. To further elucidate the corresponding changes in the functional connectivity patterns of the aberrant hubs in RLS patients, whole-brain resting-state functional connectivity analyses for the hub areas were performed. The hub analysis revealed decreased FCS in the cuneus, fusiform gyrus, paracentral lobe, and precuneus, and increased FCS in the superior frontal gyrus and thalamus in idiopathic drug-naive RLS patients. Subsequent functional connectivity analyses revealed decreased functional connectivity in sensorimotor and visual processing networks and increased functional connectivity in the affective cognitive network and cerebellar-thalamic circuit. Furthermore, the mean FCS value in the superior frontal gyrus was significantly correlated with Hamilton Anxiety Rating Scale scores in RLS patients, and the mean FCS value in the fusiform gyrus was significantly correlated with Hamilton Depression Rating Scale scores. These findings may provide novel insight into the pathophysiology of RLS. Copyright © 2018 Elsevier B.V. All rights reserved.

Comparative study of heuristic evaluation and usability testing methods.

Science.gov (United States)

Thyvalikakath, Thankam Paul; Monaco, Valerie; Thambuganipalle, Himabindu; Schleyer, Titus

2009-01-01

Usability methods, such as heuristic evaluation, cognitive walk-throughs and user testing, are increasingly used to evaluate and improve the design of clinical software applications. There is still some uncertainty, however, as to how those methods can be used to support the development process and evaluation in the most meaningful manner. In this study, we compared the results of a heuristic evaluation with those of formal user tests in order to determine which usability problems were detected by both methods. We conducted heuristic evaluation and usability testing on four major commercial dental computer-based patient records (CPRs), which together cover 80% of the market for chairside computer systems among general dentists. Both methods yielded strong evidence that the dental CPRs have significant usability problems. An average of 50% of empirically-determined usability problems were identified by the preceding heuristic evaluation. Some statements of heuristic violations were specific enough to precisely identify the actual usability problem that study participants encountered. Other violations were less specific, but still manifested themselves in usability problems and poor task outcomes. In this study, heuristic evaluation identified a significant portion of problems found during usability testing. While we make no assumptions about the generalizability of the results to other domains and software systems, heuristic evaluation may, under certain circumstances, be a useful tool to determine design problems early in the development cycle.

Altered network hub connectivity after acute LSD administration

Directory of Open Access Journals (Sweden)

Felix Müller

Full Text Available LSD is an ambiguous substance, said to mimic psychosis and to improve mental health in people suffering from anxiety and depression. Little is known about the neuronal correlates of altered states of consciousness induced by this substance. Limited previous studies indicated profound changes in functional connectivity of resting state networks after the administration of LSD. The current investigation attempts to replicate and extend those findings in an independent sample. In a double-blind, randomized, cross-over study, 100 μg LSD and placebo were orally administered to 20 healthy participants. Resting state brain activity was assessed by functional magnetic resonance imaging. Within-network and between-network connectivity measures of ten established resting state networks were compared between drug conditions. Complementary analysis were conducted using resting state networks as sources in seed-to-voxel analyses. Acute LSD administration significantly decreased functional connectivity within visual, sensorimotor and auditory networks and the default mode network. While between-network connectivity was widely increased and all investigated networks were affected to some extent, seed-to-voxel analyses consistently indicated increased connectivity between networks and subcortical (thalamus, striatum and cortical (precuneus, anterior cingulate cortex hub structures. These latter observations are consistent with findings on the importance of hubs in psychopathological states, especially in psychosis, and could underlay therapeutic effects of hallucinogens as proposed by a recent model. Keywords: LSD, fMRI, Functional connectivity, Networks, Hubs

Pinoy Nutrition Hub: The Philippine Experience in Addressing Moderate Malnutrition

International Nuclear Information System (INIS)

Ramos, Arlo; Fuentes, Eureka; Duque, Yvonette; Soriano, Nezer; Gomez, Marijo

2014-01-01

Full text: • Objective: Malnutrition is a persistent problem in the Philippines. The 2011 survey of the Food and Nutrition Research Institute reported that 3 out of 10 children are malnourished. Data shows 20.2% of children 0-47 months are underweight while 33.6% are stunted. This rate is higher in depressed areas in the country. PD Hearth is a time and tested effective program model to address malnutrition. But the PDH has minimum standards that need to be followed in the program implementation. However, a developing country like the Philippines has limitations in its resources and implementations. This paper aims to share the Philippine experience in addressing moderate malnutrition through a contextualized and modified PD Hearth approach. The specific objectives of this paper are: - to describe the challenges in implementing PD Hearth in the context of the Philippines; - to describe the innovations and modifications in the PD Hearth; - and, to illustrate the successful intervention of the PNH program against malnourished children in the community. • Methods: The Pinoy Nutrition Hub model is an innovation of PD Hearth approach. The first step was the participatory approach evaluation of existing programs on MNCHN in the communities. The next step was for the stakeholders to identify the gaps and address them. This was followed by gathering lessons learned and good practices that arose from implementing PD Hearth. Innovations were adopted to address restrictions and maximize learning in its implementation. The contextualized approach was called Pinoy Nutrition Hub (PNH). • Outcomes: - The PNH was piloted in three Area Development Programs (ADP) that represent the three island groups of the Philippines. All three ADPs reported improvement in the weight of the malnourished children enrolled in the program. Below is an illustration of the how the actual weight of children in the Visayas ADP increased. Figure 1 (Display Omitted). Average Weight of Malnourished

Enhancing usability using Near Field Communication for mobile application

Directory of Open Access Journals (Sweden)

Wihidayat Endar

2018-01-01

Full Text Available Near Field Communication (NFC as relatively new wireless communication technology pushes new challenges to application developers to make their applications easier to use and simpler to operate. This point of view known as usability element. Usability is one of the elements for creating good quality applications. This study aims to analyse the usability of mobile-based application embeds with NFC. We also try to evaluate usability in applications used by children. We developed an application called Receptionist which has a primary function as a communication tool between students, teachers and parents at a middle school. To know the impact of the NFC, the Receptionist input system is designed with two methods, via conventional navigation (using buttons and via NFC. To understand the usability of each method, we do user testing and questioners on students. The results show, using the NFC there is a significant increase in usability attributes: efficiency, effectiveness, and learnability. On the other hand, there is decreases of user satisfaction comparing to conventional method. In general, this study demonstrates the potential of new input device technologies that can improve the usability of mobile-based applications.

A State Cyber Hub Operations Framework

Science.gov (United States)

2016-06-01

current and future decision support. Finally, the Hub operations team must track and report key performance indictors ( KPIs ) (established by the state...Region); then mutually agreed-upon core KPIs should be identified and reported at this time. The goal of the Act Element is to implement the decision...Force Headquarters Page 58 JIE Joint Information Environment JMC JIE Management Construct KPI Key Performance Indicator LEA Law Enforcement

A Survey of Usability Practices in Free/Libre/Open Source Software

Science.gov (United States)

Paul, Celeste Lyn

A review of case studies about usability in eight Free/Libre/Open Source Software (FLOSS) projects showed that an important issue regarding a usability initiative in the project was the lack of user research. User research is a key component in the user-centered design (UCD) process and a necessary step for creating usable products. Reasons why FLOSS projects suffered from a lack of user research included poor or unclear project leadership, cultural differences between developer and designers, and a lack of usability engineers. By identifying these critical issues, the FLOSS usability community can begin addressing problems in the efficacy of usability activities and work towards creating more usable FLOSS products.

A Fuzzy method for the usability evaluation of nuclear medical equipment

Energy Technology Data Exchange (ETDEWEB)

Grecco, Cláudio H.S.; Santos, Isaac J.A.L.; Farias, Marcos S.; Farias, Larissa P.; Filho, Alfredo M.V., E-mail: grecco@ien.gov.br, E-mail: luquetti@ien.gov.br, E-mail: msantana@ien.gov.br, E-mail: larissapfarias@ymail.com, E-mail: marques@ien.gov.br [Instituto de Engenharia Nuclear (DENN/IEN/CNEN/RJ), Rio de Janeiro, RJ (Brazil). Departamento de Engenharia Nuclear

2017-11-01

To avoid errors when handling nuclear medical equipment, it is important to develop products with a high degree of usability. This can be achieved by performing usability evaluations in the product development process to detect and mitigate potential usability problems. Usability evaluation focuses on how well users can learn and use a product to achieve their goals. Thus, the usability evaluation has become recognized as a valuable complement to the established approaches to design good user interfaces, to reduce incidents and accidents as well the time required to learn how to use the equipment. To gather information about usability, practitioners use a variety of methods that gather feedback from users about an existing interface or plans related to a new interface. A wide range of usability evaluation methods have been proposed, but few methods focus on developing an objective and practical evaluation method for usability. Moreover, the usability evaluations are based on human judgments and most methods cannot fully solve the subjectivity of these evaluations. In order to remedy this deficiency, the purpose of this work is to adopt a Fuzzy Set Theory (FST) approach to establish a method for the usability evaluation of nuclear medical equipment based on usability heuristics for user interface design and international standards for ergonomics of human-system interaction. To exemplify the method we performed a usability evaluating of the Digital Spectrometer ESP 13004 by testing it with representative users. The results showed that the method is a proactive tool to provide a basis for checking usability of medical device interfaces. (author)

A Fuzzy method for the usability evaluation of nuclear medical equipment

International Nuclear Information System (INIS)

Grecco, Cláudio H.S.; Santos, Isaac J.A.L.; Farias, Marcos S.; Farias, Larissa P.; Filho, Alfredo M.V.

2017-01-01

To avoid errors when handling nuclear medical equipment, it is important to develop products with a high degree of usability. This can be achieved by performing usability evaluations in the product development process to detect and mitigate potential usability problems. Usability evaluation focuses on how well users can learn and use a product to achieve their goals. Thus, the usability evaluation has become recognized as a valuable complement to the established approaches to design good user interfaces, to reduce incidents and accidents as well the time required to learn how to use the equipment. To gather information about usability, practitioners use a variety of methods that gather feedback from users about an existing interface or plans related to a new interface. A wide range of usability evaluation methods have been proposed, but few methods focus on developing an objective and practical evaluation method for usability. Moreover, the usability evaluations are based on human judgments and most methods cannot fully solve the subjectivity of these evaluations. In order to remedy this deficiency, the purpose of this work is to adopt a Fuzzy Set Theory (FST) approach to establish a method for the usability evaluation of nuclear medical equipment based on usability heuristics for user interface design and international standards for ergonomics of human-system interaction. To exemplify the method we performed a usability evaluating of the Digital Spectrometer ESP 13004 by testing it with representative users. The results showed that the method is a proactive tool to provide a basis for checking usability of medical device interfaces. (author)

Usability/Sentiment for the Enterprise and ENTERPRISE

Science.gov (United States)

Meza, David; Berndt, Sarah

2014-01-01

The purpose of the Sentiment of Search Study for NASA Johnson Space Center (JSC) is to gain insight into the intranet search environment. With an initial usability survey, the authors were able to determine a usability score based on the Systems Usability Scale (SUS). Created in 1986, the freely available, well cited, SUS is commonly used to determine user perceptions of a system (in this case the intranet search environment). As with any improvement initiative, one must first examine and document the current reality of the situation. In this scenario, a method was needed to determine the usability of a search interface in addition to the user's perception on how well the search system was providing results. The use of the SUS provided a mechanism to quickly ascertain information in both areas, by adding one additional open-ended question at the end. The first ten questions allowed us to examine the usability of the system, while the last questions informed us on how the users rated the performance of the search results. The final analysis provides us with a better understanding of the current situation and areas to focus on for improvement. The power of search applications to enhance knowledge transfer is indisputable. The performance impact for any user unable to find needed information undermines project lifecycle, resource and scheduling requirements. Ever-increasing complexity of content and the user interface make usability considerations for the intranet, especially for search, a necessity instead of a 'nice-to-have'. Despite these arguments, intranet usability is largely disregarded due to lack of attention beyond the functionality of the infrastructure (White, 2013). The data collected from users of the JSC search system revealed their overall sentiment by means of the widely-known System Usability Scale. Results of the scores suggest 75%, +/-0.04, of the population rank the search system below average. In terms of a grading scaled, this equated to D or

Merits of usability testing for PACS selection

NARCIS (Netherlands)

Jorritsma, Wiard; Cnossen, Fokie; van Ooijen, Peter M. A.

Objectives: To compare the usability of different Picture Archiving and Communication System (PACS) workstations, determine whether a usability test has added value with respect to the traditional way of comparing PACSs based on functional requirements, and to evaluate the appropriateness of a

A usability test is not an interview

DEFF Research Database (Denmark)

Hertzum, Morten

2016-01-01

Usability tests are conducted to gauge users’ experience with a system, preferably before it is released for real use, and thereby find any problems that prevent users from completing their tasks, slow them down, or otherwise degrade their user experience. Such tests are important to successful...... systems development, yet test procedures vary and the quality of test results is sometimes contested. While there is no single accepted procedure for usability specialists to follow when conducting usability tests, these tests normally involve users who think out loud while using a system and an evaluator...... who observes the users’ behavior and listens in on their thoughts. This common core of usability tests is illustrated in Figure 1. The possible variations include, for example, whether the users work individually or in pairs, whether the evaluator is in the room with the user or in an adjoining room...

Templates for Cross-Cultural and Culturally Specific Usability Testing

DEFF Research Database (Denmark)

Clemmensen, Torkil

2011-01-01

The cultural diversity of users of technology challenges our methods for usability testing. This article suggests templates for cross-culturally and culturally specific usability testing, based on studies of usability testing in companies in Mumbai, Beijing, and Copenhagen. Study 1 was a cross...... tests. The result was the construction of templates for usability testing. The culturally specific templates were in Mumbai “user-centered evaluation,” Copenhagen “client-centered evaluation,” and Beijing “evaluator-centered evaluation.” The findings are compared with related research...

Usability Metrics for Gamified E-learning Course: A Multilevel Approach

Directory of Open Access Journals (Sweden)

Aleksandra Sobodić

2018-04-01

Full Text Available This paper discusses the effect of a gamified learning system for students of the master course on Web Design and Programming performed at the Faculty of Organization and Informatics. A new set of usability metrics was derived from web-based learning usability, user experience and instructional design literature and incorporated into the questionnaire which consists of three main categories: Usability, Educational Usability and User Experience. The main contribution of this paper is the development and validation of a questionnaire for measuring the usability of a gamified e-learning course from students’ perspective. Usability practitioners can use the developed metrics with confidence when evaluating the design of a gamified e-learning course in order to improve students’ engagement and motivation.

Cultural Cognition in Usability Evaluation

DEFF Research Database (Denmark)

Clemmensen, Torkil; Hertzum, Morten; Hornbæk, Kasper Anders Søren

2009-01-01

We discuss the impact of cultural differences on usability evaluations that are based on the thinking-aloud method (TA). The term ‘cultural differences' helps distinguish differences in the perception and thinking of Westerners (people from Western Europe and US citizens with European origins...... and evaluator. In conclusion, we point to the importance of matching the task presentation to users' cultural background, the different effects of thinking aloud on task performance between Easterners and Westerners, the differences in nonverbal behaviour that affect usability problem detection, and, finally...

Cultural Cognition in Usability Evaluation

DEFF Research Database (Denmark)

Clemmensen, Torkil; Hertzum, Morten; Hornbæk, Kasper Anders Søren

2009-01-01

We discuss the impact of cultural differences on usability evaluations that are based on the thinking-aloud method (TA). The term ‘cultural differences’ helps distinguish differences in the perception and thinking of Westerners (people from Western Europe and US citizens with European origins...... and evaluator. In conclusion, we point to the importance of matching the task presentation to users’ cultural background, the different effects of thinking aloud on task performance between Easterners and Westerners, the differences in nonverbal behaviour that affect usability problem detection, and, finally...

Building a Remote Usability Testing Body of Knowledge (RUTBOK)

DEFF Research Database (Denmark)

Lizano, Fulvio; Stage, Jan

2012-01-01

Remote Usability Testing (RUT) is an alternative method of usability evaluations. The main aim of RUT is the reduction of costs in the usability evaluation process. Since middle of the 90s RUT, has emerged as a technique which seems as is gaining maturity across the time. In general any discipline...

The Usability Expert’s Fear of Agility

DEFF Research Database (Denmark)

Nielsen, Lene; Madsen, Sabine

2012-01-01

This paper contributes to the HCI literature on usability practice with insights about the empirical challenges and global emerging practices caused by the advent of agile software development (ASD). In the paper we report from a worldwide study involving 12 usability professionals from 12 differ...

The deep-sea hub of the ANTARES neutrino telescope

Energy Technology Data Exchange (ETDEWEB)

Anghinolfi, M. [INFN Sezione di Genova, Via Dodecaneso 33, I-16146 Genova (Italy); Calzas, A. [Centre de Physique des Particules de Marseille (CNRS/IN2P3), Universite de la Mediterranee, 13288 Marseille (France); Dinkespiler, B. [Centre de Physique des Particules de Marseille (CNRS/IN2P3), Universite de la Mediterranee, 13288 Marseille (France); Cuneo, S. [INFN Laboratori Nazionali del Sud, Via S. Sofia 44, I-95123 Catania (Italy); Favard, S. [Centre de Physique des Particules de Marseille (CNRS/IN2P3), Universite de la Mediterranee, 13288 Marseille (France); Hallewell, G. [Centre de Physique des Particules de Marseille (CNRS/IN2P3), Universite de la Mediterranee, 13288 Marseille (France)]. E-mail: gregh@cppm.in2p3.fr; Jaquet, M. [Centre de Physique des Particules de Marseille (CNRS/IN2P3), Universite de la Mediterranee, 13288 Marseille (France); Musumeci, M. [INFN Laboratori Nazionali del Sud, Via S. Sofia 44, I-95123 Catania (Italy); Papaleo, R. [INFN Laboratori Nazionali del Sud, Via S. Sofia 44, I-95123 Catania (Italy); Raia, G. [INFN Laboratori Nazionali del Sud, Via S. Sofia 44, I-95123 Catania (Italy); Valdy, P. [IFREMER - Institut francais de recherche pour l' exploitation de la mer, Centre de La Seyne, 83500 La Seyne sur mer (France); Vernin, P. [DSM-DAPNIA, CEA SACLAY, 91191 Gif sur Yvette Cedex (France)

2006-11-15

The ANTARES neutrino telescope, currently under construction at 2500 m depth off the French Mediterranean coast, will contain 12 detection lines, powered and read out through a deep-sea junction box (JB) hub. Electrical energy from the shore station is distributed through a transformer with multiple secondary windings and a plugboard with 16 deep sea-mateable electro-optic connectors. Connections are made to the JB outputs using manned or remotely operated submersible vehicles. The triply redundant power management and slow control system is based on two identical AC-powered systems, communicating with the shore through 160 Mb/s fibre G-links and a third battery-powered system using a slower link. We describe the power and slow control systems of the underwater hub.

The deep-sea hub of the ANTARES neutrino telescope

International Nuclear Information System (INIS)

Anghinolfi, M.; Calzas, A.; Dinkespiler, B.; Cuneo, S.; Favard, S.; Hallewell, G.; Jaquet, M.; Musumeci, M.; Papaleo, R.; Raia, G.; Valdy, P.; Vernin, P.

2006-01-01

The ANTARES neutrino telescope, currently under construction at 2500 m depth off the French Mediterranean coast, will contain 12 detection lines, powered and read out through a deep-sea junction box (JB) hub. Electrical energy from the shore station is distributed through a transformer with multiple secondary windings and a plugboard with 16 deep sea-mateable electro-optic connectors. Connections are made to the JB outputs using manned or remotely operated submersible vehicles. The triply redundant power management and slow control system is based on two identical AC-powered systems, communicating with the shore through 160 Mb/s fibre G-links and a third battery-powered system using a slower link. We describe the power and slow control systems of the underwater hub

The application of design criteria for locating a hub configured supply chain for a restaurant cluster in the Stellenbosch area

Directory of Open Access Journals (Sweden)

Claudia B. Struwig

2013-06-01

Full Text Available Restaurants, in general, utilise numerous suppliers. Normally they deliver on different days in the week and at different times during the day, logistically not an optimum approach. Not only does the current practice cause frequent interruptions, but by segregating the food supply chain unnecessary traffic is generated. This article investigated the need for developing a third party supplier hub, the best positioning of that hub and the most economical routes to the customers. With the aim of providing non-franchised restaurants with the necessary leverage to become market leaders, the hub is planned to only service the restaurants within the vicinity of the Stellenbosch area. In such a hub-configured supply chain, the suppliers would be delivering to the proposed hub, from where once-off deliveries to all the restaurants may be made on days and/or times determined by them. In order to investigate the benefits of providing such a hub structure, a systematic implementation approach was used. The first step was to do market research in order to establish the need for such a hub. That is, the viability of the hub from a restaurant’s perspective was established. The next step entailed the investigation of the design criteria needed in determining a favourable hub location. Four possible hub locations were identified. The Clark and Wright’s savings algorithm was then used to determine the optimal hub location and the feasibility of the results was verified with the aid of a global positioning system (GPS device. The last steps followed involved the determination of an effective hub floor plan that may be utilised, possible products that can be supplied to the restaurants and the necessary assets needed to provide the hub’s service. Finally, by incorporating all these facets, a cost analysis was done to determine the hub’s profitability.

Gravity drives the evolution of infrared dark hubs: JVLA observations of SDC13

Science.gov (United States)

Williams, G. M.; Peretto, N.; Avison, A.; Duarte-Cabral, A.; Fuller, G. A.

2018-05-01

Context. Converging networks of interstellar filaments, that is hubs, have been recently linked to the formation of stellar clusters and massive stars. Understanding the relationship between the evolution of these systems and the formation of cores and stars inside them is at the heart of current star formation research. Aims: The goal is to study the kinematic and density structure of the SDC13 prototypical hub at high angular resolution to determine what drives its evolution and fragmentation. Methods: We have mapped SDC13, a 1000 M⊙ infrared dark hub, in NH3(1,1) and NH3(2,2) emission lines, with both the Jansky Very Large Array and Green Bank Telescope. The high angular resolution achieved in the combined dataset allowed us to probe scales down to 0.07 pc. After fitting the ammonia lines, we computed the integrated intensities, centroid velocities and line widths, along with gas temperatures and H2 column densities. Results: The mass-per-unit-lengths of all four hub filaments are thermally super-critical, consistent with the presence of tens of gravitationally bound cores identified along them. These cores exhibit a regular separation of 0.37 ± 0.16 pc suggesting gravitational instabilities running along these super-critical filaments are responsible for their fragmentation. The observed local increase of the dense gas velocity dispersion towards starless cores is believed to be a consequence of such fragmentation process. Using energy conservation arguments, we estimate that the gravitational to kinetic energy conversion efficiency in the SDC13 cores is 35%. We see velocity gradient peaks towards 63% of cores as expected during the early stages of filament fragmentation. Another clear observational signature is the presence of the most massive cores at the filaments' junction, where the velocity dispersion is largest. We interpret this as the result of the hub morphology generating the largest acceleration gradients near the hub centre. Conclusions: We

Strategic analysis on establishing a natural gas trading hub in China

Directory of Open Access Journals (Sweden)

Xiaoguang Tong

2014-12-01

Full Text Available Since 2010, the LNG importing price premium in the Asia–Pacific markets has become increasingly high, generating great effects on the economic development in China. In addition, the natural gas dependence degree is expanding continuously, making it extremely urgent to establish a natural gas trading hub in China, with the aim to ensure national energy security, to gain the pricing power, and to build the regional benchmark prices. Through a comparative analysis of internal strength/weakness and external competitiveness, we concluded that with intensively-issued supporting policies on the natural gas sector, the initiation of spot and futures markets, the rapid growth of gas production and highly-improved infrastructures, as well as Shanghai's advantageous location, China has more advantages in establishing an Asian Natural Gas Trading Hub than other counties like Singapore, Japan and Malaysia. Moreover, based on the SWOT (strength, weakness, opportunity and threat and the marketization process analysis, the following strategies were presented: to impel the establishment of a natural gas trading hub depending on the gas supply condition, to follow the policies to complete the gas storage system, to form regional communities by taking comparative advantages, and to reinforce the marketization reform and regulation system establishment with foreign experiences for reference. This study rationalized the necessity and practicality of establishing a natural gas trading hub in China and will help China make a proper decision and find a periodical strategic path in this sector.

Reassessing Wind Potential Estimates for India: Economic and Policy Implications

Energy Technology Data Exchange (ETDEWEB)

Phadke, Amol; Bharvirkar, Ranjit; Khangura, Jagmeet

2011-09-15

We assess developable on-shore wind potential in India at three different hub-heights and under two sensitivity scenarios – one with no farmland included, the other with all farmland included. Under the “no farmland included” case, the total wind potential in India ranges from 748 GW at 80m hub-height to 976 GW at 120m hub-height. Under the “all farmland included” case, the potential with a minimum capacity factor of 20 percent ranges from 984 GW to 1,549 GW. High quality wind energy sites, at 80m hub-height with a minimum capacity factor of 25 percent, have a potential between 253 GW (no farmland included) and 306 GW (all farmland included). Our estimates are more than 15 times the current official estimate of wind energy potential in India (estimated at 50m hub height) and are about one tenth of the official estimate of the wind energy potential in the US.

A proposal for a repertory-grid study of differences in Chinese, Danish, and Indian conceptions of usability: Cultural usability?

DEFF Research Database (Denmark)

Hertzum, Morten

2006-01-01

This is an unrefined proposal for a study that could form part of the exploratory phase of the Cultural Usability project. The proposed study compares three cultures (Chinese, Danish, and Indian) and two stakeholder groups (users and developers) with respect to their conceptions of usability....

Adding SPICE to a Library Internet Site: A Recipe to Enhance Usability

Directory of Open Access Journals (Sweden)

Ingrid Tonnison

2006-03-01

Full Text Available Objective - To produce a highly- usable intranet site, use the project to explore the practical application of evidence-based librarianship (EBL, and refine the library's project management methodology. Methods - Evidence was gathered via a literature review, an online survey, scenario-based usability testing, and the completion of a usability checlist. Usability issues were then addressed, guided by the Research-Based Web Design and Usability Guidelines. Results - After a preliminary revision, the site achieved a usability index of 79% after application of the "Raward Library Usability Analysis Tool". Finding the information and supporting user tasks were identified as areas of weakness. Usability testing and cleint feedback supported these findings. After these issues were addressed by a major site redeveloment, the usability index increased to 98%. Conclusions - Raward's checklist is an easy and effective tool for measuring and identifying usability issues. Its value was enhanced by scenario-based usability testing, which yielded rich, client specific information. The application of EBL and project management princples ehnanced the outcomes of the project, and the professional development of the project team.

Defining Usability of PN Services

DEFF Research Database (Denmark)

Nicolajsen, Hanne Westh; Ahola, Titta; Fleury, Alexandre

In this deliverable usability and user experience are defined in relation to MAGNET Beyond technologies, and it is described how the main MAGNET Beyond concepts can be evaluated through the involvement of users. The concepts include the new "Activity based communication approach" for interacting...... with the MAGNET Beyond system, as well as the core concepts: Personal Network, Personal Network-Federation, Service Discovery, User Profile Management, Personal Network Management, Privacy and Security and Context Awareness. The overall plans for the final usability evaluation are documented based on the present...

Sexual Orientation, Objective Height, and Self-Reported Height.

Science.gov (United States)

Skorska, Malvina N; Bogaert, Anthony F

2017-01-01

Studies that have used mostly self-reported height have found that androphilic men and women are shorter than gynephilic men and women, respectively. This study examined whether an objective height difference exists or whether a psychosocial account (e.g., distortion of self-reports) may explain these putative height differences. A total of 863 participants, recruited at a Canadian university, the surrounding region, and through lesbian, gay, bisexual, and transgender (LGBT) events across Canada, self-reported their height and had their height measured. Androphilic men were shorter, on average, than gynephilic men. There was no objective height difference between gynephilic, ambiphilic, and androphilic women. Self-reported height, statistically controlling for objective height, was not related to sexual orientation. These findings are the first to show an objective height difference between androphilic and gynephilic men. Also, the findings suggest that previous studies using self-reported height found part of a true objective height difference between androphilic and gynephilic men. These findings have implications for existing biological theories of men's sexual orientation development.

Revealing unawareness in usability related decision-making

NARCIS (Netherlands)

Harkema, C.L.E.

2012-01-01

Nowadays, many users experience usability issues with their electronic products. It does not work as they expect or otherwise irritates the user, so he becomes dissatisfied about the product and may even complain about it. Th ese numbers of complaints to companies and usability issues are high and

Dimensions for hearing-impaired mobile application usability model

Science.gov (United States)

Nathan, Shelena Soosay; Hussain, Azham; Hashim, Nor Laily; Omar, Mohd Adan

2017-10-01

This paper discuss on the dimensions that has been derived for the hearing-impaired mobile applications usability model. General usability model consist of general dimension for evaluating mobile application however requirements for the hearing-impaired are overlooked and often scanted. This led towards mobile application developed for the hearing-impaired are left unused. It is also apparent that these usability models do not consider accessibility dimensions according to the requirement of the special users. This complicates the work of usability practitioners as well as academician that practices research usability when application are developed for the specific user needs. To overcome this issue, dimension chosen for the hearing-impaired are ensured to be align with the real need of the hearing-impaired mobile application. Besides literature studies, requirements for the hearing-impaired mobile application have been identified through interview conducted with hearing-impaired mobile application users that were recorded as video outputs and analyzed using Nvivo. Finally total of 6 out of 15 dimensions gathered are chosen for the proposed model and presented.

nanoHUB.org: Experiences and Challenges in Software Sustainability for a Large Scientific Community

Directory of Open Access Journals (Sweden)

Lynn Zentner

2014-07-01

Full Text Available The science gateway nanoHUB.org, funded by the National Science Foundation (NSF, serves a large scientific community dedicated to research and education in nanotechnology with community-contributed simulation codes as well as a vast repository of other materials such as recorded presentations, teaching materials, and workshops and courses. Nearly 330,000 users annually access over 4400 items of content on nanoHUB, including 343 simulation tools. Arguably the largest nanotechnology facility in the world, nanoHUB has led the way not only in providing open access to scientific code in the nanotechnology community, but also in lowering barriers to the use of that code, by providing a platform where developers are able to easily and quickly deploy code written in a variety of languages with user-friendly graphical user interfaces and where users can run the latest versions of codes transparently on the grid or other powerful resources without ever having to download or update code. Being a leader in open access code deployment provides nanoHUB with opportunities and challenges as it meets the current and future needs of its community. This paper discusses the experiences of nanoHUB in addressing and adapting to the changing landscape of scientific software in ways that best serve its community and meet the needs of the largest portion of its user base.

Barefooted Usability Evaluation: Addressing the Mindset, Resources and Competences

OpenAIRE

Bruun , Anders

2011-01-01

Part 1: Long and Short Papers; International audience; Lack of usability specialists, high resource requirements and developer mindsets are three considerable barriers for introducing usability engineering into software companies. This Ph.D. project explores the effect of letting software developers and end users apply usability engineering methods instead of a specialist, a solution which may reduce the barriers.

Assessing Library Instruction through Web Usability and Vocabulary Studies

Science.gov (United States)

Castonguay, Remi

2008-01-01

Can we use the methods of Web usability testing to learn about library instruction? This article is among the first in the field trying to establish a link between usability and instruction. The author discusses useful insights that Web usability can bring to our pedagogy as well as to the efficiency of library instruction. The result of a Web…

Cost-justifying usability an update for the internet age

CERN Document Server

Bias, Randolph G; Bias, Randolph G

2005-01-01

You just know that an improvement of the user interface will reap rewards, but how do you justify the expense and the labor and the time-guarantee a robust ROI!-ahead of time? How do you decide how much of an investment should be funded? And what is the best way to sell usability to others? In this completely revised and new edition, Randolph G. Bias (University of Texas at Austin, with 25 years' experience as a usability practitioner and manager) and Deborah J. Mayhew (internationally recognized usability consultant and author of two other seminal books including The Usability Enginee

On the Concepts of Usability and Reusability of Learning Objects

Directory of Open Access Journals (Sweden)

Miguel-Angel Sicilia

2003-10-01

Full Text Available “Reusable learning objects” oriented towards increasing their potential reusability are required to satisfy concerns about their granularity and their independence of concrete contexts of use. Such requirements also entail that the definition of learning object “usability,” and the techniques required to carry out their “usability evaluation” must be substantially different from those commonly used to characterize and evaluate the usability of conventional educational applications. In this article, a specific characterization of the concept of learning object usability is discussed, which places emphasis on “reusability,” the key property of learning objects residing in repositories. The concept of learning object reusability is described as the possibility and adequacy for the object to be usable in prospective educational settings, so that usability and reusability are considered two interrelated – and in many cases conflicting – properties of learning objects. Following the proposed characterization of two characteristics or properties of learning objects, a method to evaluate usability of specific learning objects will be presented.

Googling Service Boundaries for Endovascular Clot Retrieval Hub Hospitals in a Metropolitan Setting: Proof-of-Concept Study.

Science.gov (United States)

Phan, Thanh G; Beare, Richard; Chen, Jian; Clissold, Benjamin; Ly, John; Singhal, Shaloo; Ma, Henry; Srikanth, Velandai

2017-05-01

There is great interest in how endovascular clot retrieval hubs provide services to a population. We applied a computational method to objectively generate service boundaries for such endovascular clot retrieval hubs, defined by traveling time to hub. Stroke incidence data merged with population census to estimate numbers of stroke in metropolitan Melbourne, Australia. Traveling time from randomly generated addresses to 4 endovascular clot retrieval-capable hubs (Royal Melbourne Hospital [RMH], Monash Medical Center [MMC], Alfred Hospital [ALF], and Austin Hospital [AUS]) estimated using Google Map application program interface. Boundary maps generated based on traveling time at various times of day for combinations of hubs. In a 2-hub model, catchment was best distributed when RMH was paired with MMC (model 1a, RMH 1765 km 2 and MMC 1164 km 2 ) or with AUS (model 1c, RMH 1244 km 2 and AUS 1685 km 2 ), with no statistical difference between models ( P =0.20). Catchment was poorly distributed when RMH was paired with ALF (model 1b, RMH 2252 km 2 and ALF 676 km 2 ), significantly different from both models 1a and 1c (both P AUS was superior to that of RMH, MMC, and ALF in catchment distribution and travel time. The method was also successfully applied to the city of Adelaide demonstrating wider applicability. We provide proof of concept for a novel computational method to objectively designate service boundaries for endovascular clot retrieval hubs. © 2017 American Heart Association, Inc.

Hub River: A private power prototype

International Nuclear Information System (INIS)

Sachs, J.L.

1992-01-01

This article examines the challenges of financing an independent power project in a developing country. The oil-fired plant is to be located on the Hub River in Baluchistan on the Arabian Sea coast. The topics of the article include a description of the team that put the project together, the financing plans, the risk in the face of political unrest and change of governments, and the beginning of construction of the project

Addressing congestion on single allocation hub-and-spoke networks

Directory of Open Access Journals (Sweden)

Ricardo Saraiva de Camargo

2012-12-01

Full Text Available When considering hub-and-spoke networks with single allocation, the absence of alternative routes makes this kind of systems specially vulnerable to congestion effects. In order to improve the design of such networks, congestion costs must be addressed. This article deploys two different techniques for addressing congestion on single allocation hub-and-spoke networks: the Generalized Benders Decomposition and the Outer Approximation method. Both methods are able to solve large scale instances. Computational experiments show how the adoption of advanced solution strategies, such as Pareto-optimal cut generation on the Master Problem branch-and-bound tree, may be decisive. They also demonstrate that the solution effort is not only associated with the size of the instances, but also with their combination of the installation and congestion costs.

Applying usability heuristics to radiotherapy systems

International Nuclear Information System (INIS)

Chan, Alvita J.; Islam, Mohammad K.; Rosewall, Tara; Jaffray, David A.; Easty, Anthony C.; Cafazzo, Joseph A.

2012-01-01

Background and purpose: Heuristic evaluations have been used to evaluate safety of medical devices by identifying and assessing usability issues. Since radiotherapy treatment delivery systems often consist of multiple complex user-interfaces, a heuristic evaluation was conducted to assess the potential safety issues of such a system. Material and methods: A heuristic evaluation was conducted to evaluate the treatment delivery system at Princess Margaret Hospital (Toronto, Canada). Two independent evaluators identified usability issues with the user-interfaces and rated the severity of each issue. Results: The evaluators identified 75 usability issues in total. Eighteen of them were rated as high severity, indicating the potential to have a major impact on patient safety. A majority of issues were found on the record and verify system, and many were associated with the patient setup process. While the hospital has processes in place to ensure patient safety, recommendations were developed to further mitigate the risks of potential consequences. Conclusions: Heuristic evaluation is an efficient and inexpensive method that can be successfully applied to radiotherapy delivery systems to identify usability issues and improve patient safety. Although this study was conducted only at one site, the findings may have broad implications for the design of these systems.

Qualitative review of usability problems in health information systems for radiology.

Science.gov (United States)

Dias, Camila Rodrigues; Pereira, Marluce Rodrigues; Freire, André Pimenta

2017-12-01

Radiology processes are commonly supported by Radiology Information System (RIS), Picture Archiving and Communication System (PACS) and other software for radiology. However, these information technologies can present usability problems that affect the performance of radiologists and physicians, especially considering the complexity of the tasks involved. The purpose of this study was to extract, classify and analyze qualitatively the usability problems in PACS, RIS and other software for radiology. A systematic review was performed to extract usability problems reported in empirical usability studies in the literature. The usability problems were categorized as violations of Nielsen and Molich's usability heuristics. The qualitative analysis indicated the causes and the effects of the identified usability problems. From the 431 papers initially identified, 10 met the study criteria. The analysis of the papers identified 90 instances of usability problems, classified into categories corresponding to established usability heuristics. The five heuristics with the highest number of instances of usability problems were "Flexibility and efficiency of use", "Consistency and standards", "Match between system and the real world", "Recognition rather than recall" and "Help and documentation", respectively. These problems can make the interaction time consuming, causing delays in tasks, dissatisfaction, frustration, preventing users from enjoying all the benefits and functionalities of the system, as well as leading to more errors and difficulties in carrying out clinical analyses. Furthermore, the present paper showed a lack of studies performed on systems for radiology, especially usability evaluations using formal methods of evaluation involving the final users. Copyright © 2017 Elsevier Inc. All rights reserved.

Development of passive-controlled HUB (teetered brake & damper mechanism) of horizontal axis wind turbine

Energy Technology Data Exchange (ETDEWEB)

Shimizu, Yukimaru; Kamada, Yasunari; Maeda, Takao [Mie Univ. (Japan)

1997-12-31

For the purpose of the improvement of reliability of the Mega-Watt wind turbine, this paper indicates the development of an original mechanism for the passive-controlled hub, which has the effects of braking and damping on aerodynamic forces. This mechanism is useful for variable speed control of the large wind turbine. The passive-controlled hub is the combination of two mechanisms. One is the passive-teetered and damping mechanism, and the other is the passive-variable-pitch mechanism. These mechanism are carried out by the combination of the teetering and feathering motions. When the wind speed exceeds the rated wind speed, the blade is passively teetered in a downwind direction and, simultaneously, a feathering mechanism, which is linked to the teetering mechanism through a connecting rods, is activated. Testing of the model horizontal axis wind turbine in a wind tunnel showed that the passive-controlled hub mechanism can suppress the over-rotational speed of the rotor. By the application of the passive-controlled hub mechanism, the maximum rotor speed is reduced to about 60%.

Gas and LNG pricing and trading hub in East Asia: An introduction

OpenAIRE

Shi, Xunpeng

2017-01-01

This paper summarizes the four papers in the special issues on ‘Gas and LNG pricing and trading hub in East Asia’. The papers examine lessons and experience from European hub development, other commodity, the Japanese history on developing of futures markets and inter-fuel substitution in East Asia. The papers finds that liquid futures market is the key to formulate benchmark prices while a well-developed spot market is the foundation; political will and strong leadership are required to over...

FEM analysis of hollow hub forming in rolling extrusion process

Directory of Open Access Journals (Sweden)

J. Bartnicki

2014-10-01

Full Text Available In this paper are presented the results of numerical calculations of rolling extrusion process of a hollow hub. As the flanges manufacturing at both sides of the product is required, in the analyzed process of rolling extrusion, a rear bumper was implemented as additional tool limiting axial metal flow. Numerical calculations of the hub forming process were conducted basing on finite element method, applying software Deform3D and Simufact in conditions of three dimensional state of strain. The obtained satisfactory results show that it is possible to conduct the further research works of experimental character, with the application of a modernized aggregate for the rolling extrusion process PO-2.

Usability Testing of Two Ambulatory EHR Navigators.

Science.gov (United States)

Hultman, Gretchen; Marquard, Jenna; Arsoniadis, Elliot; Mink, Pamela; Rizvi, Rubina; Ramer, Tim; Khairat, Saif; Fickau, Keri; Melton, Genevieve B

2016-01-01

Despite widespread electronic health record (EHR) adoption, poor EHR system usability continues to be a significant barrier to effective system use for end users. One key to addressing usability problems is to employ user testing and user-centered design. To understand if redesigning an EHR-based navigation tool with clinician input improved user performance and satisfaction. A usability evaluation was conducted to compare two versions of a redesigned ambulatory navigator. Participants completed tasks for five patient cases using the navigators, while employing a think-aloud protocol. The tasks were based on Meaningful Use (MU) requirements. The version of navigator did not affect perceived workload, and time to complete tasks was longer in the redesigned navigator. A relatively small portion of navigator content was used to complete the MU-related tasks, though navigation patterns were highly variable across participants for both navigators. Preferences for EHR navigation structures appeared to be individualized. This study demonstrates the importance of EHR usability assessments to evaluate group and individual performance of different interfaces and preferences for each design.

Continuous Integration for Concurrent MOOSE Framework and Application Development on GitHub

Directory of Open Access Journals (Sweden)

Andrew E. Slaughter

2015-11-01

Full Text Available For the past several years, Idaho National Laboratory’s MOOSE framework team has employed modern software engineering techniques (continuous integration, joint application/framework source code repos- itories, automated regression testing, etc. in developing closed-source multiphysics simulation software (Gaston et al., 'Journal of Open Research Software' vol. 2, article e10, 2014. In March 2014, the MOOSE framework was released under an open source license on GitHub, significantly expanding and diversifying the pool of current active and potential future contributors on the project. Despite this recent growth, the same philosophy of concurrent framework and application development continues to guide the project’s development roadmap. Several specific practices, including techniques for managing multiple repositories, conducting automated regression testing, and implementing a cascading build process are discussed in this short paper. Special attention is given to describing the manner in which these practices naturally synergize with the GitHub API and GitHub-specific features such as issue tracking, Pull Requests, and project forks.

Characteristics of steady vibration in a rotating hub-beam system

Science.gov (United States)

Zhao, Zhen; Liu, Caishan; Ma, Wei

2016-02-01

A rotating beam features a puzzling character in which its frequencies and modal shapes may vary with the hub's inertia and its rotating speed. To highlight the essential nature behind the vibration phenomena, we analyze the steady vibration of a rotating Euler-Bernoulli beam with a quasi-steady-state stretch. Newton's law is used to derive the equations governing the beam's elastic motion and the hub's rotation. A combination of these equations results in a nonlinear partial differential equation (PDE) that fully reflects the mutual interaction between the two kinds of motion. Via the Fourier series expansion within a finite interval of time, we reduce the PDE into an infinite system of a nonlinear ordinary differential equation (ODE) in spatial domain. We further nondimensionalize the ODE and discretize it via a difference method. The frequencies and modal shapes of a general rotating beam are then determined numerically. For a low-speed beam where the ignorance of geometric stiffening is feasible, the beam's vibration characteristics are solved analytically. We validate our numerical method and the analytical solutions by comparing with either the past experiments or the past numerical findings reported in existing literature. Finally, systematic simulations are performed to demonstrate how the beam's eigenfrequencies vary with the hub's inertia and rotating speed.

Feedback from Usability Evaluation to User Interface Design

DEFF Research Database (Denmark)

Nielsen, C. M.; Overgaard, M.; Pedersen, M. B.

2005-01-01

This paper reports from an exploratory study of means for providing feedback from a usability evaluation to the user interface designers. In this study, we conducted a usability evaluation of a mobile system that is used by craftsmen to register use of time and materials. The results...... and weaknesses of the system. The findings indicate that detailed descriptions of problems and log descriptions of the user's interaction with the system and of system interaction are useful for the designers when trying to understand the usability problems that the users have encountered....

Coffee Shops, Classrooms and Conversations: public engagement and outreach in a large interdisciplinary research Hub

Science.gov (United States)

Holden, Jennifer A.

2014-05-01

Public engagement and outreach activities are increasingly using specialist staff for co-ordination, training and support for researchers, they are also becoming expected for large investments. Here, the experience of public engagement and outreach a large, interdisciplinary Research Hub is described. dot.rural, based at the University of Aberdeen UK, is a £11.8 million Research Councils UK Rural Digital Economy Hub, funded as part of the RCUK Digital Economy Theme (2009-2015). Digital Economy research aims to realise the transformational impact of digital technologies on aspects of the environment, community life, cultural experiences, future society, and the economy. The dot.rural Hub involves 92 researchers from 12 different disciplines, including Geography, Hydrology and Ecology. Public Engagement and Outreach is embedded in the dot.rural Digital Economy Hub via an Outreach Officer. Alongside this position, public engagement and outreach activities are compulsory part of PhD student contracts. Public Engagement and Outreach activities at the dot.rural Hub involve individuals and groups in both formal and informal settings organised by dot.rural and other organisations. Activities in the realms of Education, Public Engagement, Traditional and Social Media are determined by a set of Underlying Principles designed for the Hub by the Outreach Officer. The underlying Engagement and Outreach principles match funding agency requirements and expectations alongside researcher demands and the user-led nature of Digital Economy Research. All activities include researchers alongside the Outreach Officer are research informed and embedded into specific projects that form the Hub. Successful public engagement activities have included participation in Café Scientifique series, workshops in primary and secondary schools, and online activities such as I'm a Scientist Get Me Out of Here. From how to engage 8 year olds with making hydrographs more understandable to members of

Fear of heights and visual height intolerance.

Science.gov (United States)

Brandt, Thomas; Huppert, Doreen

2014-02-01

The aim of this review is, first, to cover the different aspects of visual height intolerance such as historical descriptions, definition of terms, phenomenology of the condition, neurophysiological control of gaze, stance and locomotion, and therapy, and, second, to identify warranted epidemiological and experimental studies. Vivid descriptions of fear of heights can be found in ancient texts from the Greek, Roman, and Chinese classics. The life-time prevalence of visual height intolerance is as high as 28% in the general population, and about 50% of those who are susceptible report an impact on quality of life. When exposed to heights, visual exploration by eye and head movements is restricted, and the velocity of locomotion is reduced. Therapy for fear of heights is dominated by the behavioral techniques applied during real or virtual reality exposure. Their efficacy might be facilitated by the administration of D-cycloserine or glucocorticoids. Visual height intolerance has a considerable impact on daily life and interpersonal interactions. It is much more frequent than fear of heights, which is defined as an environmental subtype of a specific phobia. There is certainly a continuum stretching from acrophobia to a less-pronounced visual height intolerance, to which the categorical distinction of a specific phobia does not apply.

Could Crop Height Affect the Wind Resource at Agriculturally Productive Wind Farm Sites?

Science.gov (United States)

Vanderwende, Brian; Lundquist, Julie K.

2016-03-01

The collocation of cropland and wind turbines in the US Midwest region introduces complex meteorological interactions that could influence both agriculture and wind-power production. Crop management practices may affect the wind resource through alterations of land-surface properties. We use the weather research and forecasting (WRF) model to estimate the impact of crop height variations on the wind resource in the presence of a large turbine array. A hypothetical wind farm consisting of 121 1.8-MW turbines is represented using the WRF model wind-farm parametrization. We represent the impact of selecting soybeans rather than maize by altering the aerodynamic roughness length in a region approximately 65 times larger than that occupied by the turbine array. Roughness lengths of 0.1 and 0.25 m represent the mature soy crop and a mature maize crop, respectively. In all but the most stable atmospheric conditions, statistically significant hub-height wind-speed increases and rotor-layer wind-shear reductions result from switching from maize to soybeans. Based on simulations for the entire month of August 2013, wind-farm energy output increases by 14 %, which would yield a significant monetary gain. Further investigation is required to determine the optimal size, shape, and crop height of the roughness modification to maximize the economic benefit and minimize the cost of such crop-management practices. These considerations must be balanced by other influences on crop choice such as soil requirements and commodity prices.

Usability engineering: domain analysis activities for augmented-reality systems

Science.gov (United States)

Gabbard, Joseph; Swan, J. E., II; Hix, Deborah; Lanzagorta, Marco O.; Livingston, Mark; Brown, Dennis B.; Julier, Simon J.

2002-05-01

This paper discusses our usability engineering process for the Battlefield Augmented Reality System (BARS). Usability engineering is a structured, iterative, stepwise development process. Like the related disciplines of software and systems engineering, usability engineering is a combination of management principals and techniques, formal and semi- formal evaluation techniques, and computerized tools. BARS is an outdoor augmented reality system that displays heads- up battlefield intelligence information to a dismounted warrior. The paper discusses our general usability engineering process. We originally developed the process in the context of virtual reality applications, but in this work we are adapting the procedures to an augmented reality system. The focus of this paper is our work on domain analysis, the first activity of the usability engineering process. We describe our plans for and our progress to date on our domain analysis for BARS. We give results in terms of a specific urban battlefield use case we have designed.

Network performance, hub connectivity potential, and competitive position of primary airports in Asia/Pacific region

NARCIS (Netherlands)

Matsumoto, H.; Veldhuis, J.; de Wit, J.; Burghouwt, G.

2008-01-01

Recently, hub-and-spoke network configurations are more and more developed in the Asia/Pacific region. In this paper, it is argued that the measurement of network performance in hub-and-spoke systems should take into account the quantity and quality of both direct and indirect connections. The

Business-Intelligence-Systeme im Spannungsfeld zwischen Usability und Sicherheit

OpenAIRE

Hinck, Thorsten

2010-01-01

Business-Intelligence-Systeme stehen im Spannungsfeld zwischen Usability und Sicherheit. Die Gefahren und Sicherheitsmaßnahmen für Informationssysteme werden ermittelt und ökonomisch in Bezug zur Gebrauchstauglichkeit gesetzt. Es entsteht ein Sicherheitsprofil für Business-Intelligence-Systeme. Business-Intelligence-Systems are in tension between Usability and IT-Security. Risks and safety measures of informationsystems are defined and set in (economic) regard to Usability. A security prof...

Review of research on AFPM hub motor

Directory of Open Access Journals (Sweden)

Jianguo DAI

2018-02-01

Full Text Available The industrialization of new energy vehicles is an important way to promote the sustainable development of automobile industry, and it is also the key measure to solve the problems of energy and environment. As an important type of new energy vehicles, electric vehicles will play an important role in the future competition in the automotive industry, especially in the field of electric vehicle driven by wheel. With the advantages of compact structure, high power density, low working noise and good heat dissipation performance, the AFPM motor has gradually become the preferred object of the hub driving device. Based on the statement of the technical development and research status about AFPM motor, this paper mainly analyzes the engineering application and technical problems of AFPM motor in hub drive, especially the matching of AFPM motor with other systems and the problem of heat dissipation at high load conditions, and looks forward to the key role in the future development of the automotive industry. This paper will play a certain reference and guiding role in the application of AFPM motor in the field of new energy vehicles.

Can eye tracking boost usability evaluation of computer games?

DEFF Research Database (Denmark)

Johansen, Sune Alstrup; Noergaard, Mie; Soerensen, Janus Rau

2008-01-01

Good computer games need to be challenging while at the same time being easy to use. Accordingly, besides struggling with well known challenges for usability work, such as persuasiveness, the computer game industry also faces system-specific challenges, such as identifying methods that can provide...... data on players' attention during a game. This position paper discusses how eye tracking may address three core challenges faced by computer game producer IO Interactive in their on-going work to ensure games that are fun, usable, and challenging. These challenges are: (1) Persuading game designers...... about the relevance of usability results, (2) involving game designers in usability work, and (3) identifying methods that provide new data about user behaviour and experience....

Post-deployment usability evaluation of a radiology workstation

NARCIS (Netherlands)

Jorritsma, Wiard; Cnossen, Fokie; Dierckx, Rudi A.; Oudkerk, Matthijs; Van Ooijen, Peter M. A.

Objectives: To determine the number, nature and severity of usability issues radiologists encounter while using a commercially available radiology workstation in clinical practice, and to assess how well the results of a pre-deployment usability evaluation of this workstation generalize to clinical

How to Reach Evidence-Based Usability Evaluation Methods

NARCIS (Netherlands)

Marcilly, Romaric; Peute, Linda

2017-01-01

This paper discusses how and why to build evidence-based knowledge on usability evaluation methods. At each step of building evidence, requisites and difficulties to achieve it are highlighted. Specifically, the paper presents how usability evaluation studies should be designed to allow capitalizing

Web usability testing with a Hispanic medically underserved population.

Science.gov (United States)

Moore, Mary; Bias, Randolph G; Prentice, Katherine; Fletcher, Robin; Vaughn, Terry

2009-04-01

Skilled website developers value usability testing to assure user needs are met. When the target audience differs substantially from the developers, it becomes essential to tailor both design and evaluation methods. In this study, researchers carried out a multifaceted usability evaluation of a website (Healthy Texas) designed for Hispanic audiences with lower computer literacy and lower health literacy. METHODS INCLUDED: (1) heuristic evaluation by a usability engineer, (2) remote end-user testing using WebEx software; and (3) face-to-face testing in a community center where use of the website was likely. Researchers found standard usability testing methods needed to be modified to provide interpreters, increased flexibility for time on task, presence of a trusted intermediary such as a librarian, and accommodation for family members who accompanied participants. Participants offered recommendations for website redesign, including simplified language, engaging and relevant graphics, culturally relevant examples, and clear navigation. User-centered design is especially important when website developers are not representative of the target audience. Failure to conduct appropriate usability testing with a representative audience can substantially reduce use and value of the website. This thorough course of usability testing identified improvements that benefit all users but become crucial when trying to reach an underserved audience.

Sharing environmental models: An Approach using GitHub repositories and Web Processing Services

Science.gov (United States)

Stasch, Christoph; Nuest, Daniel; Pross, Benjamin

2016-04-01

The GLUES (Global Assessment of Land Use Dynamics, Greenhouse Gas Emissions and Ecosystem Services) project established a spatial data infrastructure for scientific geospatial data and metadata (http://geoportal-glues.ufz.de), where different regional collaborative projects researching the impacts of climate and socio-economic changes on sustainable land management can share their underlying base scenarios and datasets. One goal of the project is to ease the sharing of computational models between institutions and to make them easily executable in Web-based infrastructures. In this work, we present such an approach for sharing computational models relying on GitHub repositories (http://github.com) and Web Processing Services. At first, model providers upload their model implementations to GitHub repositories in order to share them with others. The GitHub platform allows users to submit changes to the model code. The changes can be discussed and reviewed before merging them. However, while GitHub allows sharing and collaborating of model source code, it does not actually allow running these models, which requires efforts to transfer the implementation to a model execution framework. We thus have extended an existing implementation of the OGC Web Processing Service standard (http://www.opengeospatial.org/standards/wps), the 52°North Web Processing Service (http://52north.org/wps) platform to retrieve all model implementations from a git (http://git-scm.com) repository and add them to the collection of published geoprocesses. The current implementation is restricted to models implemented as R scripts using WPS4R annotations (Hinz et al.) and to Java algorithms using the 52°North WPS Java API. The models hence become executable through a standardized Web API by multiple clients such as desktop or browser GIS and modelling frameworks. If the model code is changed on the GitHub platform, the changes are retrieved by the service and the processes will be updated

GeoTrust Hub: A Platform For Sharing And Reproducing Geoscience Applications

Science.gov (United States)

Malik, T.; Tarboton, D. G.; Goodall, J. L.; Choi, E.; Bhatt, A.; Peckham, S. D.; Foster, I.; Ton That, D. H.; Essawy, B.; Yuan, Z.; Dash, P. K.; Fils, G.; Gan, T.; Fadugba, O. I.; Saxena, A.; Valentic, T. A.

2017-12-01

Recent requirements of scholarly communication emphasize the reproducibility of scientific claims. Text-based research papers are considered poor mediums to establish reproducibility. Papers must be accompanied by "research objects", aggregation of digital artifacts that together with the paper provide an authoritative record of a piece of research. We will present GeoTrust Hub (http://geotrusthub.org), a platform for creating, sharing, and reproducing reusable research objects. GeoTrust Hub provides tools for scientists to create `geounits'--reusable research objects. Geounits are self-contained, annotated, and versioned containers that describe and package computational experiments in an efficient and light-weight manner. Geounits can be shared on public repositories such as HydroShare and FigShare, and also using their respective APIs reproduced on provisioned clouds. The latter feature enables science applications to have a lifetime beyond sharing, wherein they can be independently verified and trust be established as they are repeatedly reused. Through research use cases from several geoscience laboratories across the United States, we will demonstrate how tools provided from GeoTrust Hub along with Hydroshare as its public repository for geounits is advancing the state of reproducible research in the geosciences. For each use case, we will address different computational reproducibility requirements. Our first use case will be an example of setup reproducibility which enables a scientist to set up and reproduce an output from a model with complex configuration and development environments. Our second use case will be an example of algorithm/data reproducibility, where in a shared data science model/dataset can be substituted with an alternate one to verify model output results, and finally an example of interactive reproducibility, in which an experiment is dependent on specific versions of data to produce the result. Toward this we will use software and data

Stochastic optimization of energy hub operation with consideration of thermal energy market and demand response

International Nuclear Information System (INIS)

Vahid-Pakdel, M.J.; Nojavan, Sayyad; Mohammadi-ivatloo, B.; Zare, Kazem

2017-01-01

Highlights: • Studying heating market impact on energy hub operation considering price uncertainty. • Investigating impact of implementation of heat demand response on hub operation. • Presenting stochastic method to consider wind generation and prices uncertainties. - Abstract: Multi carrier energy systems or energy hubs has provided more flexibility for energy management systems. On the other hand, due to mutual impact of different energy carriers in energy hubs, energy management studies become more challengeable. The initial patterns of energy demands from grids point of view can be modified by optimal scheduling of energy hubs. In this work, optimal operation of multi carrier energy system has been studied in the presence of wind farm, electrical and thermal storage systems, electrical and thermal demand response programs, electricity market and thermal energy market. Stochastic programming is implemented for modeling the system uncertainties such as demands, market prices and wind speed. It is shown that adding new source of heat energy for providing demand of consumers with market mechanism changes the optimal operation point of multi carrier energy system. Presented mixed integer linear formulation for the problem has been solved by executing CPLEX solver of GAMS optimization software. Simulation results shows that hub’s operation cost reduces up to 4.8% by enabling the option of using thermal energy market for meeting heat demand.

Penentuan Pelabuhan Hub untuk Crude Palm Oil (CPO Ekspor di Indonesia

Directory of Open Access Journals (Sweden)

Eko Andi Haranto

2013-03-01

Full Text Available CPO (Crude Palm Oil merupakan salah satu komoditi ekspor terbesar di Indonesia. Moda angkut darat dan sungai menjadi pilihan untuk didistribusikan menuju calon pelabuhan hub. Tugas Akhir ini bertujuan untuk merencanakan pola operasi armada pengangkut CPO, dan penentuan pelabuhan hub untuk ekspor CPO. Metode Transportasi digunakan untuk memilih pabrik pengolahan CPO sebagai pemasok utama. Dari hasil analisis didapatkan bahwa penggunaan moda darat menggunakan truk lebih optimal dibandingkan menggunakan tongkang hal ini dikarenakan kondisi sungai di Kalimantan Tengah yang dangkal. Dengan menggunakan metode transportasi didapatkan empat lokasi pabrik pengolahan minyak kelapa sawit. Pelabuhan hub yang terpilih berlokasi di Bagendang dan Bumi Harjo. Kedua titik tersebut dipilih karena sudah memiliki tangki timbun dan dermaga untuk ekspor CPO, selain itu pemilihan berdasarkan hasil analisa didapatkan biaya dari Pabrik PT. ATLANTIS ke Pelabuhan Bagendang dengan truk berukuran 10 ton memerlukan biaya sebesar Rp. 333.016,25/TRIP/TRUK. Pabrik PT. ATLANTIS II ke Pelabuhan Bagendang Rp. 237.868,75/TRIP/TRUK. Pabrik PT. TIGER ke Pelabuhan Bumi Harjo Rp. 475.737,50/TRIP/TRUK. PT. TIGER II merupakan pabrik yang dapat melakukan pengiriman langsung menggunakan tongkang berukuran 1800 DWT melewati sungai Barito, dengan biaya Rp.123.007.828,27,- /voyage.

Usability Assessment of International Office Website of Diponegoro University With Scenario Based Usability Evaluation Method and Wammi Method

OpenAIRE

Ratna Purwaningsih; Ikhsan Yenifi

2015-01-01

Website development needs to pay attention to usability aspect which consist of four factors: efficiency, effectiveness, satisfactions and error rate. The website of International Office of Diponegoro University provides academic information for Indonesian students and foreign students. The website still has some problem, especially on searching certain information. This research aims to evaluate the design of the existing website and measures the usability. A well-designed website will help ...

Post-deployment usability evaluation of a radiology workstation

NARCIS (Netherlands)

Jorritsma, Wiard; Cnossen, Fokie; Dierckx, Rudi; Oudkerk, Matthijs; van Ooijen, Peter

2015-01-01

Objective To evaluate the usability of a radiology workstation after deployment in a hospital. Significance In radiology, it is difficult to perform valid pre-deployment usability evaluations due to the heterogeneity of the user group, the complexity of the radiological workflow, and the complexity

Usability Plans and Schemes for Low Fidelity Prototypes

DEFF Research Database (Denmark)

Schultz, Nette; Kirk Sørensen, Jannick; Sørensen, Lene

2006-01-01

Internal report of WP1 task 4 activities from August 2006 to December 2006. This report describes the setup of a usability evaluation framework for evaluating core MAGNET concepts in terms of usability. Initially, these core concepts are identified and modes of operation involving...

Usability evaluation of a locomotor therapy device considering different strategies

Directory of Open Access Journals (Sweden)

Langthaler Sonja

2016-09-01

Full Text Available Usability of medical devices is one of the main determining factors in preventing use errors in treatment and strongly correlates to patient safety and quality of treatment. This thesis demonstrates the usability testing and evaluation of a prototype for locomotor therapy of infants. Therefore, based on the normative requirements of the EN 62366, a concept combined of evaluation procedures and assessing methods was created to enable extensive testing and analysis of the different aspects of usability. On the basis of gathered information weak points were identified and appropriate measures were presented to increase the usability and operating safety of the locomotor prototype. The overall outcome showed an usability value of 77.4% and an evaluation score of 6.99, which can be interpreted as “satisfactory”.

Usability Testing for Developing Effective Interactive Multimedia Software: Concepts, Dimensions, and Procedures

Directory of Open Access Journals (Sweden)

Sung Heum Lee

1999-04-01

Full Text Available Usability testing is a dynamic process that can be used throughout the process of developing interactive multimedia software. The purpose of usability testing is to find problems and make recommendations to improve the utility of a product during its design and development. For developing effective interactive multimedia software, dimensions of usability testing were classified into the general categories of: learnability; performance effectiveness; flexibility; error tolerance and system integrity; and user satisfaction. In the process of usability testing, evaluation experts consider the nature of users and tasks, tradeoffs supported by the iterative design paradigm, and real world constraints to effectively evaluate and improve interactive multimedia software. Different methods address different purposes and involve a combination of user and usability testing, however, usability practitioners follow the seven general procedures of usability testing for effective multimedia development. As the knowledge about usability testing grows, evaluation experts will be able to choose more effective and efficient methods and techniques that are appropriate to their goals.

The role of usability in e-lexicography

Directory of Open Access Journals (Sweden)

André H. du Plessis

2017-05-01

Full Text Available In the development of the metalexicography, the primary focus of metalexicographers was on the development of printed dictionaries. As technology advances, the focus now shifts towards online and electronic products. Tarp (2009:23–24 posits that this shift results in metalexicographic shortcomings. This means that the theories used to create and evaluate dictionaries are not sufficient anymore. Bergenholtz and Bothma (2011:54 show that dictionaries as data carriers are now not only limited to the field of lexicography, but also to information technological fields. For current lexicographers to be successful in the digital age, the theories used in designing, developing and critiquing dictionaries must adapt with regards to current information technological trends, norms and practices. One aspect that must be addressed is the usability of dictionaries and other electronic lexicographic tools. By using usability theories and standards, current metalexicographical principles can be adapted for the digital age in a streamlined fashion. This study aims to show how usability theories and standards can be advantageous for metalexicography and that future electronic metalexicographic endeavours should not be undertaken without considering the usability as part of the theoretical framework.

Analysis of Food Hub Commerce and Participation Using Agent-Based Modeling: Integrating Financial and Social Drivers.

Science.gov (United States)

Krejci, Caroline C; Stone, Richard T; Dorneich, Michael C; Gilbert, Stephen B

2016-02-01

Factors influencing long-term viability of an intermediated regional food supply network (food hub) were modeled using agent-based modeling techniques informed by interview data gathered from food hub participants. Previous analyses of food hub dynamics focused primarily on financial drivers rather than social factors and have not used mathematical models. Based on qualitative and quantitative data gathered from 22 customers and 11 vendors at a midwestern food hub, an agent-based model (ABM) was created with distinct consumer personas characterizing the range of consumer priorities. A comparison study determined if the ABM behaved differently than a model based on traditional economic assumptions. Further simulation studies assessed the effect of changes in parameters, such as producer reliability and the consumer profiles, on long-term food hub sustainability. The persona-based ABM model produced different and more resilient results than the more traditional way of modeling consumers. Reduced producer reliability significantly reduced trade; in some instances, a modest reduction in reliability threatened the sustainability of the system. Finally, a modest increase in price-driven consumers at the outset of the simulation quickly resulted in those consumers becoming a majority of the overall customer base. Results suggest that social factors, such as desire to support the community, can be more important than financial factors. An ABM of food hub dynamics, based on human factors data gathered from the field, can be a useful tool for policy decisions. Similar approaches can be used for modeling customer dynamics with other sustainable organizations. © 2015, Human Factors and Ergonomics Society.

Privacy Enhancing Keyboard: Design, Implementation, and Usability Testing

Directory of Open Access Journals (Sweden)

Zhen Ling

2017-01-01

Full Text Available To protect users from numerous password inference attacks, we invent a novel context aware privacy enhancing keyboard (PEK for Android touch-based devices. Usually PEK would show a QWERTY keyboard when users input text like an email or a message. Nevertheless, whenever users enter a password in the input box on his or her touch-enabled device, a keyboard will be shown to them with the positions of the characters shuffled at random. PEK has been released on the Google Play since 2014. However, the number of installations has not lived up to our expectation. For the purpose of usable security and privacy, we designed a two-stage usability test and performed two rounds of iterative usability testing in 2016 and 2017 summer with continuous improvements of PEK. The observations from the usability testing are educational: (1 convenience plays a critical role when users select an input method; (2 people think those attacks that PEK prevents are remote from them.

A human reliability based usability evaluation method for safety-critical software

International Nuclear Information System (INIS)

Boring, R. L.; Tran, T. Q.; Gertman, D. I.; Ragsdale, A.

2006-01-01

Boring and Gertman (2005) introduced a novel method that augments heuristic usability evaluation methods with that of the human reliability analysis method of SPAR-H. By assigning probabilistic modifiers to individual heuristics, it is possible to arrive at the usability error probability (UEP). Although this UEP is not a literal probability of error, it nonetheless provides a quantitative basis to heuristic evaluation. This method allows one to seamlessly prioritize and identify usability issues (i.e., a higher UEP requires more immediate fixes). However, the original version of this method required the usability evaluator to assign priority weights to the final UEP, thus allowing the priority of a usability issue to differ among usability evaluators. The purpose of this paper is to explore an alternative approach to standardize the priority weighting of the UEP in an effort to improve the method's reliability. (authors)

DAVINC3I: moving towards responsive hub network designs

NARCIS (Netherlands)

Ossevoort, R.; Keizer, de M.; Vorst, van der J.G.A.J.; Wenink, E.

2013-01-01

The Dutch floricultural sector is generally appreciated for its world leadership; the Netherlands is the flower trading hub for the European market. There are two trends affecting this position. First, virtualisation makes trade flows relatively footloose and flexible. Moreover, it enables the use

Development and testing of new upper-limb prosthetic devices: research designs for usability testing.

Science.gov (United States)

Resnik, Linda

2011-01-01

The purposes of this article are to describe usability testing and introduce designs and methods of usability testing research as it relates to upper-limb prosthetics. This article defines usability, describes usability research, discusses research approaches to and designs for usability testing, and highlights a variety of methodological considerations, including sampling, sample size requirements, and usability metrics. Usability testing is compared with other types of study designs used in prosthetic research.

Research dedusting efficiency of the inertial hub with adjustable parameters

Directory of Open Access Journals (Sweden)

Sharapov Rashid

2016-01-01

Full Text Available Production of construction materials every year production increases, thus increasing emissions pollutants into the atmosphere subjected to cleaning. At the enterprises of building materials production equipment becoming outdated both morally and physically exhausted their useful life. Technological design standards in the operation of purification equipment has undergone a number of changes. There are a large number of works devoted to the theory of cyclone separation. They examined calculation method and to determine the minimum size of particles is separated completely from the air stream in a cyclone. In theory, the high efficiency cyclones are relatively small separation of particles from the air stream. The experiments show that certain fractions of full capture occurs from the cyclones and out relatively large particles. Designed dust device hubs. They capture dust particles with low specific density and smaller than 5–10 microns. Rational use of hubs is achieved in the aspiration systems high performance. They are placed in front of or between the filter and the cyclone filter. Hub much reduces the amount of dust-laden air directed onto a thin cleaning. This reduces energy consumption for manufacturing as a whole, as well as, due to a possible decrease in performance fine filters, reducing their initial cost, metal consumption, maintenance costs and reduce the area occupied by them.

Real-Time Monitoring and Fault Diagnosis of a Low Power Hub Motor Using Feedforward Neural Network

Directory of Open Access Journals (Sweden)

Mehmet Şimşir

2016-01-01

Full Text Available Low power hub motors are widely used in electromechanical systems such as electrical bicycles and solar vehicles due to their robustness and compact structure. Such systems driven by hub motors (in wheel motors encounter previously defined and undefined faults under operation. It may inevitably lead to the interruption of the electromechanical system operation; hence, economic losses take place at certain times. Therefore, in order to maintain system operation sustainability, the motor should be precisely monitored and the faults are diagnosed considering various significant motor parameters. In this study, the artificial feedforward backpropagation neural network approach is proposed to real-time monitor and diagnose the faults of the hub motor by measuring seven main system parameters. So as to construct a necessary model, we trained the model, using a data set consisting of 4160 samples where each has 7 parameters, by the MATLAB environment until the best model is obtained. The results are encouraging and meaningful for the specific motor and the developed model may be applicable to other types of hub motors. The prosperous model of the whole system was embedded into Arduino Due microcontroller card and the mobile real-time monitoring and fault diagnosis system prototype for hub motor was designed and manufactured.

The influence of hubs in the structure of a neuronal network during an epileptic seizure

Science.gov (United States)

Rodrigues, Abner Cardoso; Cerdeira, Hilda A.; Machado, Birajara Soares

2016-02-01

In this work, we propose changes in the structure of a neuronal network with the intention to provoke strong synchronization to simulate episodes of epileptic seizure. Starting with a network of Izhikevich neurons we slowly increase the number of connections in selected nodes in a controlled way, to produce (or not) hubs. We study how these structures alter the synchronization on the spike firings interval, on individual neurons as well as on mean values, as a function of the concentration of connections for random and non-random (hubs) distribution. We also analyze how the post-ictal signal varies for the different distributions. We conclude that a network with hubs is more appropriate to represent an epileptic state.

Users Views about the Usability of Digital Libraries

Science.gov (United States)

Koohang, Alex; Ondracek, James

2005-01-01

This study examined users' views about the usability of digital libraries' current and perceived importance. Age, gender, prior experience with the Internet, college status, and digital library proficiency are the independent variables. Users' current views about the usability of digital libraries and users perceived importance of digital library…

Information users and usability in the digital age

CERN Document Server

Chowdhury, G G

2013-01-01

Gives an overview of the necessary issues relating to information users and the usability of information services in the digital world, including user-centred design, and the characteristics and behaviour of information users. This book helps readers understand why information users and the usability of information services are important.

A Usability Evaluation of Academic Virtual Reference Services

Science.gov (United States)

Chow, Anthony S.; Croxton, Rebecca A.

2014-01-01

This study examined the usability of five virtual reference services--instant messenger chat, e-mail, telephone, text messaging, and Skype videoconferencing--by having 31 undergraduate and graduate students evaluate the usability of the virtual reference services of two different universities. The study's results suggest that user preference and…

UX Professionals’ Definitions of Usability and UX

DEFF Research Database (Denmark)

Rajanen, Dorina; Clemmensen, Torkil; Iivari, Netta

2017-01-01

This paper examines the views of user experience (UX) professionals on the definitions of usability and UX, and compares the findings between countries and within different socio-cultural groups. A mixed-method analysis was employed on data gathered on 422 professionals through a survey in Turkey......, Finland, Denmark, France, and Malaysia. Usability appears to be an established concept, respondents across all countries agreeing on the importance of the ISO 9241-11 definition. There is also a tendency that UX professionals attach organizational perspective to usability. UX professionals diverge when...... defining UX, and there are systematic differences related to socio-cultural conditions. UX professionals in Finland and France incline more towards the definition highlighting the experiential qualities, when compared to Turkey and Malaysia that incline towards the definition reflecting the ease of use...

Integrating discount usability in scrum development process in Ethiopia

DEFF Research Database (Denmark)

Teka, Degif; Dittrich, Y.; Kifle, Mesfin

2017-01-01

be adapted and integrated into the Scrum-agile development with especial emphasis on the Ethiopian context. The research aims at adapting software engineering and ICT development methods to the specific situation and integrating user-centered design (UCD) and lightweight usability methods into agile...... end users and developers. Culturally adapted user pair testing and heuristic evaluation supported usability testing and supported developers in getting early feedback. Integrated approach of discount usability with the Scrum process has been developed and evaluated first with the involved...

A framework for characterizing usability requirements elicitation and analysis methodologies (UREAM)

NARCIS (Netherlands)

Trienekens, J.J.M.; Kusters, R.J.; Mannaert, H.

2012-01-01

Dedicated methodologies for the elicitation and analysis of usability requirements have been proposed in literature, usually developed by usability experts. The usability of these approaches by non-expert software engineers is not obvious. In this paper, the objective is to support developers and

A Longitudinal Study of Usability in Health Care - Does Time Heal?

DEFF Research Database (Denmark)

Kjeldskov, Jesper; Skov, Mikael B.; Stage, Jan

2007-01-01

for 15 months, we repeated the evaluation. Our aim was to inquire into the nature of usability problems experienced by novice and expert users, and to see to what extend usability problems of a health care information system may or may not disappear over time, as the nurses get more familiar......We report from a longitudinal laboratory-based usability evaluation of a health care information system. A usability evaluation was conducted with novice users when an electronic patient record system was being deployed in a large hospital. After the nurses had used the system in their daily work...... with it – if time heals poor design. On the basis of our study, we present findings on the usability of the electronic patient system as experienced by the nurses at these two different points in time and discuss implications for evaluating usability in health care....

Implementing a collaborative virtual environment — specification for a usability metamodel

Directory of Open Access Journals (Sweden)

Maria L Villegas R

2009-01-01

Full Text Available This research presents the results of the first phase of a macro-project for constructing a collaborative virtual environment. It was aimed at selecting a graphical interface from five proposed for such environment, considering each one’s level of usability. Seve- ral standards of usability and user-centered design patterns were studied for specifying interface measurment criteria for speci- fying a usability metamodel; this defined the variables and rules to be taken into accout when measuring graphic user interface (GUI usability level for collaborative virtual environments. The use of metaphors when specifying graphic user interfaces is also briefly looked at as a source of new usability and satisfaction related to such interface use.

The Usability Analysis of An E-Learning Environment

Directory of Open Access Journals (Sweden)

Fulya TORUN

2015-10-01

Full Text Available In this research, an E-learning environment is developed for the teacher candidates taking the course on Scientific Research Methods. The course contents were adapted to one of the constructivist approach models referred to as 5E, and an expert opinion was received for the compliance of this model. An usability analysis was also performed to determine the usability of the e-learning environment. The participants of the research comprised 42 teacher candidates. The mixed method was used in the research. 3 different data collection tools were used in order to measure the three basic concepts of usability analyses, which are the dimensions of effectiveness, efficiency and satisfaction. Two of the data collection tools were the scales developed by different researchers and were applied with the approval received from the researchers involved. On the other hand, the usability test as another data tool was prepared by the researchers who conducted this study for the purpose of determining the participants’ success in handling the twelve tasks assigned to them with respect to the use of elearning environment, the seconds they spent on that environment and the number of clicks they performed. Considering the results of the analyses performed within the data obtained, the usability of the developed e-learning environment proved to be at a higher rate.

Usability Evaluation of An Electronic Medication Administration Record (eMAR) Application

Science.gov (United States)

Guo, J.; Iribarren, S.; Kapsandoy, S.; Perri, S.; Staggers, N.

2011-01-01

Background Electronic medication administration records (eMARs) have been widely used in recent years. However, formal usability evaluations are not yet available for these vendor applications, especially from the perspective of nurses, the largest group of eMAR users. Objective To conduct a formal usability evaluation of an implemented eMAR. Methods Four evaluators examined a commercial vendor eMAR using heuristic evaluation techniques. The evaluators defined seven tasks typical of eMAR use and independently evaluated the application. Consensus techniques were used to obtain 100% agreement of identified usability problems and severity ratings. Findings were reviewed with 5 clinical staff nurses and the Director of Clinical Informatics who verified findings with a small group of clinical nurses. Results Evaluators found 60 usability problems categorized into 233 heuristic violations. Match, Error, and Visibility heuristics were the most frequently violated. Administer Medication and Order and Modify Medications tasks had the highest number of heuristic violations and usability problems rated as major or catastrophic. Conclusion The high number of usability problems could impact the effectiveness, efficiency and satisfaction of nurses’ medication administration activities and may include concerns about patient safety. Usability is a joint responsibility between sites and vendors. We offer a call to action for usability evaluations at all sites and eMAR application redesign as necessary to improve the user experience and promote patient safety. PMID:23616871

A Usability Evaluation Model for Academic Library Websites: Efficiency, Effectiveness and Learnability

Directory of Open Access Journals (Sweden)

Soohyung Joo

2011-12-01

Full Text Available Purpose – This paper aimed to develop a usability evaluation model and associated survey tool in the context of academic libraries. This study not only proposed a usability evaluation model but also a practical survey tool tailored to academic library websites. Design/methodology – A usability evaluation model has been developed for academic library websites based on literature review and expert consultation. Then, the authors verified the reliability and validity of the usability evaluation model empirically using the survey data from actual users. Statistical analysis, such as descriptive statistics, internal consistency test, and a factor analysis, were applied to ensure both the reliability and validity of the usability evaluation tool. Findings – From the document analysis and expert consultation, this study identified eighteen measurement items to survey the three constructs of the usability, effectiveness, efficiency, and learnability, in academic library websites. The evaluation tool was then validated with regard to data distribution, reliability, and validity. The empirical examination based on 147 actual user responses proved the survey evaluation tool suggested herein is acceptable in assessing academic library website usability. Originality/Value – This research is one of the few studies to engender a practical survey tool in evaluating library website usability. The usability model and corresponding survey tool would be useful for librarians and library administrators in academic libraries who plan to conduct a usability evaluation involving large sample.

Assessment of Usability Benchmarks: Combining Standardized Scales with Specific Questions

Directory of Open Access Journals (Sweden)

Stephanie Bettina Linek

2011-12-01

Full Text Available The usability of Web sites and online services is of rising importance. When creating a completely new Web site, qualitative data are adequate for identifying the most usability problems. However, changes of an existing Web site should be evaluated by a quantitative benchmarking process. The proposed paper describes the creation of a questionnaire that allows a quantitative usability benchmarking, i.e. a direct comparison of the different versions of a Web site and an orientation on general standards of usability. The questionnaire is also open for qualitative data. The methodology will be explained by the digital library services of the ZBW.

The development of gas hubs in Europe

International Nuclear Information System (INIS)

Miriello, Caterina; Polo, Michele

2015-01-01

This paper investigates the development of wholesale markets for natural gas at the different stages of market liberalization. We identify three steps in the process: wholesale trade initially develops to cope with balancing needs when the shippers and suppliers segments become more fragmented; once the market becomes more liquid, it turns out to be a second source of gas procurement in alternative to long term contracts; finally, to manage price risk financial instruments are traded. We review in detail the different regulatory measures that must be introduced to create an efficient and functioning wholesale gas market. Finally, we analyze the evolution of gas hubs in the UK, the Netherlands, Germany and Italy in terms of market rules and market liquidity. We argue that each of these country cases can be easily located into the evolutionary path we have highlighted at the beginning, with the UK and the Netherlands leading the process, Germany and Italy constrained by limited supply; Italy is also showing an interesting counterfactual. -- Highlights: •The paper illustrates development paths for natural gas hubs in Europe. •Wholesale trade increases with competition. •The regulatory settings of UK, Netherlands, Germany and Italy are reviewed. •Each country is located into the evolutionary path highlighted in the analytical framework

Workshop on cultural usability and human work interaction design

DEFF Research Database (Denmark)

Clemmensen, Torkil; Ørngreen, Rikke; Roese, Kerstin

2008-01-01

it into interaction design. The workshop will present current research into cultural usability and human work interaction design. Cultural usability is a comprehensive concept, which adheres to all kinds of contexts in which humans are involved (private family, work, public and private organizations, nature......, Workplace observation, Think-Aloud Usability Test, etc. These techniques often give - seemingly - similar results when applied in diverse cultural settings, but experience shows that we need a deep understanding of the cultural, social and organizational context to interpret the results, and to transform...

Optimal integrated sizing and planning of hubs with midsize/large CHP units considering reliability of supply

International Nuclear Information System (INIS)

Moradi, Saeed; Ghaffarpour, Reza; Ranjbar, Ali Mohammad; Mozaffari, Babak

2017-01-01

Highlights: • New hub planning formulation is proposed to exploit assets of midsize/large CHPs. • Linearization approaches are proposed for two-variable nonlinear CHP fuel function. • Efficient operation of addressed CHPs & hub devices at contingencies are considered. • Reliability-embedded integrated planning & sizing is formulated as one single MILP. • Noticeable results for costs & reliability-embedded planning due to mid/large CHPs. - Abstract: Use of multi-carrier energy systems and the energy hub concept has recently been a widespread trend worldwide. However, most of the related researches specialize in CHP systems with constant electricity/heat ratios and linear operating characteristics. In this paper, integrated energy hub planning and sizing is developed for the energy systems with mid-scale and large-scale CHP units, by taking their wide operating range into consideration. The proposed formulation is aimed at taking the best use of the beneficial degrees of freedom associated with these units for decreasing total costs and increasing reliability. High-accuracy piecewise linearization techniques with approximation errors of about 1% are introduced for the nonlinear two-dimensional CHP input-output function, making it possible to successfully integrate the CHP sizing. Efficient operation of CHP and the hub at contingencies is extracted via a new formulation, which is developed to be incorporated to the planning and sizing problem. Optimal operation, planning, sizing and contingency operation of hub components are integrated and formulated as a single comprehensive MILP problem. Results on a case study with midsize CHPs reveal a 33% reduction in total costs, and it is demonstrated that the proposed formulation ceases the need for additional components/capacities for increasing reliability of supply.

Virtual Replication of IoT Hubs in the Cloud: A Flexible Approach to Smart Object Management

Directory of Open Access Journals (Sweden)

Simone Cirani

2018-03-01

Full Text Available In future years, the Internet of Things is expected to interconnect billions of highly heterogeneous devices, denoted as “smart objects”, enabling the development of innovative distributed applications. Smart objects are constrained sensor/actuator-equipped devices, in terms of computational power and available memory. In order to cope with the diverse physical connectivity technologies of smart objects, the Internet Protocol is foreseen as the common “language” for full interoperability and as a unifying factor for integration with the Internet. Large-scale platforms for interconnected devices are required to effectively manage resources provided by smart objects. In this work, we present a novel architecture for the management of large numbers of resources in a scalable, seamless, and secure way. The proposed architecture is based on a network element, denoted as IoT Hub, placed at the border of the constrained network, which implements the following functions: service discovery; border router; HTTP/Constrained Application Protocol (CoAP and CoAP/CoAP proxy; cache; and resource directory. In order to protect smart objects (which cannot, because of their constrained nature, serve a large number of concurrent requests and the IoT Hub (which serves as a gateway to the constrained network, we introduce the concept of virtual IoT Hub replica: a Cloud-based “entity” replicating all the functions of a physical IoT Hub, which external clients will query to access resources. IoT Hub replicas are constantly synchronized with the physical IoT Hub through a low-overhead protocol based on Message Queue Telemetry Transport (MQTT. An experimental evaluation, proving the feasibility and advantages of the proposed architecture, is presented.

Usability Evaluation Method for Agile Software Development

Directory of Open Access Journals (Sweden)

Saad Masood Butt

2015-02-01

Full Text Available Agile methods are the best fit for tremendously growing software industry due to its flexible and dynamic nature. But the software developed using agile methods do meet the usability standards? To answer this question we can see that majority of agile software development projects currently involve interactive user interface designs, which can only be possible by following User Centered Design (UCD in agile methods. The question here is, how to integrate UCD with agile models. Both Agile models and UCD are iterative in nature but agile models focus on coding and development of software; whereas, UCD focuses on user interface of the software. Similarly, both of them have testing features where the agile model involves automated tested code while UCD involves an expert or a user to test the user interface. In this paper, a new agile usability model is proposed and the evaluation is of the proposed model is presented by practically implementing it in three real life projects. . Key results from these projects clearly show: the proposed agile model incorporates usability evaluation methods, improves the relationship between usability experts to work with agile software experts; in addition, allows agile developers to incorporate the result from UCD into subsequent interactions.

Optimal Scheduling of a Multi-Carrier Energy Hub Supplemented By Battery Energy Storage Systems

DEFF Research Database (Denmark)

Javadi, Mohammad Sadegh; Anvari-Moghaddam, Amjad; Guerrero, Josep M.

2017-01-01

This paper introduces a management model for optimal scheduling of a multi-carrier energy hub. In the proposed hub, three types of assets are considered: dispersed generating systems (DGs) such as micro-combined heat and power (mCHP) units, storage devices such as battery-based electrical storage...... systems (ESSs), and heating/cooling devices such as electrical heater, heat-pumps and absorption chillers. The optimal scheduling and management of the examined energy hub assets in line with electrical transactions with distribution network is modeled as a mixed-integer non-linear optimization problem....... In this regard, optimal operating points of DG units as well as ESSs are calculated based on a cost-effective strategy. Degradation cost of ESSs is also taken into consideration for short-term scheduling. Simulation results demonstrate that including well-planned energy storage options together with optimal...

Memory for target height is scaled to observer height.

Science.gov (United States)

Twedt, Elyssa; Crawford, L Elizabeth; Proffitt, Dennis R

2012-04-01

According to the embodied approach to visual perception, individuals scale the environment to their bodies. This approach highlights the central role of the body for immediate, situated action. The present experiments addressed whether body scaling--specifically, eye-height scaling--occurs in memory when action is not immediate. Participants viewed standard targets that were either the same height as, taller than, or shorter than themselves. Participants then viewed a comparison target and judged whether the comparison was taller or shorter than the standard target. Participants were most accurate when the standard target height matched their own heights, taking into account postural changes. Participants were biased to underestimate standard target height, in general, and to push standard target height away from their own heights. These results are consistent with the literature on eye-height scaling in visual perception and suggest that body scaling is not only a useful metric for perception and action, but is also preserved in memory.

Users' performance in lab and non-lab environments through online usability testing:A case of evaluating the usability of digital academic libraries' websites

OpenAIRE

Alharbi, Abeer; Mayhew, Pam

2015-01-01

The factors related to the environment in which users operate may be of a vital importance when trying to understand how they experience a particular system. It is required that we find out how we can get to know those factors to investigate if they affect the users' performance in usability testing. An online usability study has emerged that can be attempted by a large, varied pool of users' anywhere with an Internet connection. Would the usage of an online usability study help to give compr...

Software Usability: Concepts, Attributes and Associated Health Problems

Directory of Open Access Journals (Sweden)

Grīnberga Sabīne

2016-10-01

Full Text Available Digital technologies have opened a large set of opportunities for new electronic services (e-commerce, e-health, e-studies etc.. There are many considerations that need to be made when programmers are building new application software or system software. The software needs to be attractive enough that people want to look at it. It also needs to contain all necessary information that developers want to share with their readers (customers, users in order to help them achieve the objective for which they came to their website, use their software, or interact with their teaching packages. The oversupply of e-services products has created a need for usability research and development. “Usability means making products and systems easier to use, and matching them more closely to user needs and requirements”. Usability is a key concept of the human-computer interface and is concerned with making computer systems easy to learn and easy to use through a user-centered design process. The in-depth understanding of usability concepts and processes are critical for large-scale acceptance of new e-services and knowledge productivity. Poorly designed software can be extremely annoying to users. Smith and Mayes state that „usability is now recognised as a vital determining factor in the success of any new computer system or computer-based service”. Studies have shown that the main health problems of computer users are repetitive strain injuries, visual discomfort and stress-related disorders. Beside other risk factors, such as poor workstation design, uncomfortable work postures, long hours of computer use every day, stress, etc., also poor design and usability of the computer systems, as well as computer technical problems, add to the pressure felt by the user, which may in turn cause stress-related disorders.

Usability Testing of an Academic Library Web Site: A Case Study.

Science.gov (United States)

Battleson, Brenda; Booth, Austin; Weintrop, Jane

2001-01-01

Discusses usability testing as a tool for evaluating the effectiveness and ease of use of academic library Web sites; considers human-computer interaction; reviews major usability principles; and explores the application of formal usability testing to an existing site at the University at Buffalo (NY) libraries. (Author/LRW)

Direct Integration: Training Software Developers to Conduct Usability Evaluations

DEFF Research Database (Denmark)

Skov, Mikael B.; Stage, Jan

2008-01-01

is based on an empirical study where 36 teams with a total of 234 first-year university students on software development and design educations were trained in a simple approach for user-based website usability testing that was taught in a 40 hour course. This approach supported them in planning, conducting......Many improvements of the interplay between usability evaluation and software development rely either on better methods for conducting usability evaluations or on better formats for presenting evaluation results in ways that are useful for software designers and developers. Both approaches involve...... a complete division of work between developers and evaluators, which is an undesirable complexity for many software development projects. This paper takes a different approach by exploring to what extent software developers and designers can be trained to carry out their own usability evaluations. The paper...

Social Context in Usability Evaluations: Concepts, Processes and Products

DEFF Research Database (Denmark)

Jensen, Janne Jul

social context is considered important, only little research has been done to identify how it influences usability evaluations. In this thesis I explore how social context affects the process and product of a usability evaluation and explain the findings in terms of the theory of behaviour settings...... leader) and non-operatives (members, spectators, neutrals and potentials) from the theory of behaviour settings to usability evaluations generates an understanding and create an awareness of the level of power possessed by each of the participants in the social context. 2. On the operative level...... and a field experiment. Findings from these activities are presented in five published paper contributions. I furthermore introduce the theory of behaviour settings as a tool to help characterise the key concepts of social context which, together with an understanding of usability evaluations, provide...

Dogmas in the assessment of usability evaluation methods

DEFF Research Database (Denmark)

Hornbæk, Kasper

2010-01-01

Usability evaluation methods (UEMs) are widely recognised as an essential part of systems development. Assessments of the performance of UEMs, however, have been criticised for low validity and limited reliability. The present study extends this critique by describing seven dogmas in recent work ...... research approaches that may help move beyond the dogmas. In particular, we emphasise detailed studies of evaluation processes, assessments of the impact of UEMs on design carried out in real-world systems development and analyses of how UEMs may be combined......Usability evaluation methods (UEMs) are widely recognised as an essential part of systems development. Assessments of the performance of UEMs, however, have been criticised for low validity and limited reliability. The present study extends this critique by describing seven dogmas in recent work...... on UEMs. The dogmas include using inadequate procedures and measures for assessment, focusing on win-lose outcomes, holding simplistic models of how usability evaluators work, concentrating on evaluation rather than on design and working from the assumption that usability problems are real. We discuss...

On the assessment of usability testing methods for children

NARCIS (Netherlands)

Markopoulos, P.; Bekker, M.M.

2003-01-01

The paper motivates the need to acquire methodological knowledge for involving children as test users in usability testing. It introduces a methodological framework for delineating comparative assessments of usability testing methods for children participants. This framework consists in three

Exploring the Usability of Mobile Apps Supporting Radiologists' Training in Diagnostic Decision Making.

Science.gov (United States)

Kim, Min Soon; Aro, Michael R; Lage, Kraig J; Ingalls, Kevin L; Sindhwani, Vivek; Markey, Mia K

2016-03-01

The objective of this study was to conduct a usability evaluation of mobile apps for supporting education and training in radiologic diagnostic decision-making processes. Of 381 mobile apps available at two major stores (Google Play and iTunes), eight iOS apps were selected for laboratory-based usability tests. Six staff radiologists completed eight app-specific task sets, using a think-aloud strategy. The triangular methods approach included quantitative performance measures, System Usability Scale (SUS), and qualitative thematic analysis using heuristic usability principles of usability issues. Overall, radiologists achieved higher than 70% success, with favorable SUS scores, in completing the tasks for seven of the eight apps. However, task success rate and SUS score had a weak relation (r = 0.23), indicating that the perceived usability may not reflect the holistic usability of the app. Task analysis and self-report revealed 108 usability issues, which were condensed to 55 unique issues and categorized by nine usability themes and mapped to ten usability heuristics. Nonintuitive functionality (eg, nonintuitive or misleading labels) was the most frequent theme observed, leading to inefficient navigation. These usability findings were consistent with the 13 improvements the radiologists suggested. This study demonstrates the feasibility of usability evaluation of radiology mobile apps and suggests potential improvements in the development of radiology mobile apps. This study also suggests that proficiency with mobile devices may not be equivalent to being an expert user, proficient in using the apps. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Investigation of the Usability of Computerized Critical Care Information Systems in Germany.

Science.gov (United States)

von Dincklage, Falk; Suchodolski, Klaudiusz; Lichtner, Gregor; Friesdorf, Wolfgang; Podtschaske, Beatrice; Ragaller, Maximilian

2017-01-01

The term "usability" describes how effectively, efficiently, and with what level of user satisfaction an information system can be used to accomplish specific goals. Computerized critical care information systems (CCISs) with high usability increase quality of care and staff satisfaction, while reducing medication errors. Conversely, systems lacking usability can interrupt clinical workflow, facilitate errors, and increase charting time. The aim of this study was to investigate and compare usability across CCIS currently used in Germany. In this study, German intensive care unit (ICU) nurses and physicians completed a specialized, previously validated, web-based questionnaire. The questionnaire assessed CCIS usability based on three rating models: an overall rating of the systems, a model rating technical usability, and a model rating task-specific usability. We analyzed results from 535 survey participants and compared eight different CCIS commonly used in Germany. Our results showed that usability strongly differs across the compared systems. The system ICUData had the best overall rating and technical usability, followed by the platforms ICM and MetaVision. The same three systems performed best in the rating of task-specific usability without significant differences between each other. Across all systems, overall ratings were more dependent on ease-of-use aspects than on aspects of utility/functionality, and the general scope of the functions offered was rated better than how well the functions are realized. Our results suggest that manufacturers should shift some of their effort away from the development of new features and focus more on improving the ease-of-use and quality of existing features.

WHAT IS CONTROLLING THE FRAGMENTATION IN THE INFRARED DARK CLOUD G14.225–0.506?: DIFFERENT LEVELS OF FRAGMENTATION IN TWIN HUBS

Energy Technology Data Exchange (ETDEWEB)

Busquet, Gemma; Girart, Josep Miquel [Institut de Ciències de l’Espai (CSIC-IEEC), Campus UAB, Carrer de Can Magrans, S/N, E-08193, Cerdanyola del Vallès, Catalunya (Spain); Estalella, Robert [Departament d’Astronomia i Meteorologia, Institut de Ciències del Cosmos (ICC), Universitat de Barcelona (IEEC-UB), Martí i Franquès, 1, E-08028 Barcelona, Catalunya (Spain); Palau, Aina [Instituto de Radioastronomía y Astrofísica, Universidad Nacional Autónoma de México, P.O. Box 3-72, 58090 Morelia, Michoacán, México (Mexico); Liu, Hauyu Baobab; Ho, Paul T. P. [Academia Sinica Institute of Astronomy and Astrophysics, Taipei, Taiwan (China); Zhang, Qizhou [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); De Gregorio-Monsalvo, Itziar [European Southern Observatory (ESO), Karl-Schwarzschild-Str. 2, D-85748 Garching (Germany); Pillai, Thushara [Max Planck Institut für Radioastronomie, Auf dem Hügel 69, D-53121 Bonn (Germany); Anglada, Guillem, E-mail: busquet@ice.cat [Instituto de Astrofísica de Andalucía, CSIC, Glorieta de la Astronomía, s/n, E-18008, Granada (Spain)

2016-03-20

We present observations of the 1.3 mm continuum emission toward hub-N and hub-S of the infrared dark cloud G14.225–0.506 carried out with the Submillimeter Array, together with observations of the dust emission at 870 and 350 μm obtained with APEX and CSO telescopes. The large-scale dust emission of both hubs consists of a single peaked clump elongated in the direction of the associated filament. At small scales, the SMA images reveal that both hubs fragment into several dust condensations. The fragmentation level was assessed under the same conditions and we found that hub-N presents 4 fragments while hub-S is more fragmented, with 13 fragments identified. We studied the density structure by means of a simultaneous fit of the radial intensity profile at 870 and 350 μm and the spectral energy distribution adopting a Plummer-like function to describe the density structure. The parameters inferred from the model are remarkably similar in both hubs, suggesting that density structure could not be responsible for determining the fragmentation level. We estimated several physical parameters, such as the level of turbulence and the magnetic field strength, and we found no significant differences between these hubs. The Jeans analysis indicates that the observed fragmentation is more consistent with thermal Jeans fragmentation compared with a scenario in which turbulent support is included. The lower fragmentation level observed in hub-N could be explained in terms of stronger UV radiation effects from a nearby H ii region, evolutionary effects, and/or stronger magnetic fields at small scales, a scenario that should be further investigated.

WHAT IS CONTROLLING THE FRAGMENTATION IN THE INFRARED DARK CLOUD G14.225–0.506?: DIFFERENT LEVELS OF FRAGMENTATION IN TWIN HUBS

International Nuclear Information System (INIS)

Busquet, Gemma; Girart, Josep Miquel; Estalella, Robert; Palau, Aina; Liu, Hauyu Baobab; Ho, Paul T. P.; Zhang, Qizhou; De Gregorio-Monsalvo, Itziar; Pillai, Thushara; Anglada, Guillem

2016-01-01

We present observations of the 1.3 mm continuum emission toward hub-N and hub-S of the infrared dark cloud G14.225–0.506 carried out with the Submillimeter Array, together with observations of the dust emission at 870 and 350 μm obtained with APEX and CSO telescopes. The large-scale dust emission of both hubs consists of a single peaked clump elongated in the direction of the associated filament. At small scales, the SMA images reveal that both hubs fragment into several dust condensations. The fragmentation level was assessed under the same conditions and we found that hub-N presents 4 fragments while hub-S is more fragmented, with 13 fragments identified. We studied the density structure by means of a simultaneous fit of the radial intensity profile at 870 and 350 μm and the spectral energy distribution adopting a Plummer-like function to describe the density structure. The parameters inferred from the model are remarkably similar in both hubs, suggesting that density structure could not be responsible for determining the fragmentation level. We estimated several physical parameters, such as the level of turbulence and the magnetic field strength, and we found no significant differences between these hubs. The Jeans analysis indicates that the observed fragmentation is more consistent with thermal Jeans fragmentation compared with a scenario in which turbulent support is included. The lower fragmentation level observed in hub-N could be explained in terms of stronger UV radiation effects from a nearby H ii region, evolutionary effects, and/or stronger magnetic fields at small scales, a scenario that should be further investigated

Dynamically Allocated Hub in Task-Evoked Network Predicts the Vulnerable Prefrontal Locus for Contextual Memory Retrieval in Macaques.

Directory of Open Access Journals (Sweden)

Takahiro Osada

2015-06-01

Full Text Available Neuroimaging and neurophysiology have revealed that multiple areas in the prefrontal cortex (PFC are activated in a specific memory task, but severity of impairment after PFC lesions is largely different depending on which activated area is damaged. The critical relationship between lesion sites and impairments has not yet been given a clear mechanistic explanation. Although recent works proposed that a whole-brain network contains hubs that play integrative roles in cortical information processing, this framework relying on an anatomy-based structural network cannot account for the vulnerable locus for a specific task, lesioning of which would bring impairment. Here, we hypothesized that (i activated PFC areas dynamically form an ordered network centered at a task-specific "functional hub" and (ii the lesion-effective site corresponds to the "functional hub," but not to a task-invariant "structural hub." To test these hypotheses, we conducted functional magnetic resonance imaging experiments in macaques performing a temporal contextual memory task. We found that the activated areas formed a hierarchical hub-centric network based on task-evoked directed connectivity, differently from the anatomical network reflecting axonal projection patterns. Using a novel simulated-lesion method based on support vector machine, we estimated severity of impairment after lesioning of each area, which accorded well with a known dissociation in contextual memory impairment in macaques (impairment after lesioning in area 9/46d, but not in area 8Ad. The predicted severity of impairment was proportional to the network "hubness" of the virtually lesioned area in the task-evoked directed connectivity network, rather than in the anatomical network known from tracer studies. Our results suggest that PFC areas dynamically and cooperatively shape a functional hub-centric network to reallocate the lesion-effective site depending on the cognitive processes, apart from

The East African Resilience Innovation Hub | CRDI - Centre de ...

International Development Research Centre (IDRC) Digital Library (Canada)

The hub will explore several research streams to examine why interventions succeed or fail, and how individuals, communities, and states can cope with and overcome conflict and violence. Researchers will also look at how to support peacemaking processes and increase disaster prevention efforts. Their work will respond ...

Childhood height, adult height, and the risk of prostate cancer

DEFF Research Database (Denmark)

Bjerregaard, Lise Geisler; Aarestrup, Julie; Gamborg, Michael

2016-01-01

PURPOSE: We previously showed that childhood height is positively associated with prostate cancer risk. It is, however, unknown whether childhood height exerts its effects independently of or through adult height. We investigated whether and to what extent childhood height has a direct effect...... on the risk of prostate cancer apart from adult height. METHODS: We included 5,871 men with height measured at ages 7 and 13 years in the Copenhagen School Health Records Register who also had adult (50-65 years) height measured in the Danish Diet, Cancer and Health study. Prostate cancer status was obtained...... through linkage to the Danish Cancer Registry. Direct and total effects of childhood height on prostate cancer risk were estimated from Cox regressions. RESULTS: From 1996 to 2012, 429 prostate cancers occurred. Child and adult heights were positively and significantly associated with prostate cancer risk...

Evaluation of Virtual Teaching-Learning Environments based on usability standards

Directory of Open Access Journals (Sweden)

Jose I. Cocunubo-Suarez

2018-01-01

Full Text Available The main objective of this review article is to determine the necessary sub-characteristics or aspects for the evaluation of Virtual Teaching-Learning Environments (VTLEs as final or finished products based on ISO 9126, 14598 and 25000-SQuaRE standards. A systematic information search was carried out. A total of 108 documents were retrieved about subjects such as web usability, virtual learning environments, usability, educational software, educational web evaluation, usability evaluation and web usability evaluation. Out of the 108 documents, 70 were selected by inclusion and exclusion analysis. The eight subfeatures of greater statistical frequency were identified among the subset of documents and then integrated as a proposal for standard 25000-SQuaRE.

Game usability advancing the player experience

CERN Document Server

Isbister, Katherine

2008-01-01

I. What is usability and why should I care?A. Overview chapter Isbister and Schaffer (Editors)Introduces key concepts and positions book for primary audiences: game developers andstudents aspiring to work in game development. Addresses key concerns that developersmay have about adopting usability, and sets a broad road map of what is to come in thebook.B. Interview with Tobi Saulnier of 1st PlayableA discussion with the CEO of a small game studio about why and how she uses usabilitytechniques in her development.C. Interview with Don Norman of Nielsen Norman groupA discussion with one of the pr

The STEP database through the end-users eyes--USABILITY STUDY.

Science.gov (United States)

Salunke, Smita; Tuleu, Catherine

2015-08-15

The user-designed database of Safety and Toxicity of Excipients for Paediatrics ("STEP") is created to address the shared need of drug development community to access the relevant information of excipients effortlessly. Usability testing was performed to validate if the database satisfies the need of the end-users. Evaluation framework was developed to assess the usability. The participants performed scenario based tasks and provided feedback and post-session usability ratings. Failure Mode Effect Analysis (FMEA) was performed to prioritize the problems and improvements to the STEP database design and functionalities. The study revealed several design vulnerabilities. Tasks such as limiting the results, running complex queries, location of data and registering to access the database were challenging. The three critical attributes identified to have impact on the usability of the STEP database included (1) content and presentation (2) the navigation and search features (3) potential end-users. Evaluation framework proved to be an effective method for evaluating database effectiveness and user satisfaction. This study provides strong initial support for the usability of the STEP database. Recommendations would be incorporated into the refinement of the database to improve its usability and increase user participation towards the advancement of the database. Copyright © 2015 Elsevier B.V. All rights reserved.

Usability Problem Identification in Culturally Diverse Settings

DEFF Research Database (Denmark)

Clemmensen, Torkil

2012-01-01

There are indications that established methods for evaluating information system usability that have been developed for use in, e.g. Europe or the USA, fail to give reliable results in countries such as India, China or Malaysia. This paper presents the theoretical background, related work...... and a definition of culture that should be useful for studies of multiple-country usability testing. This includes a discussion of cultural fit and the consequences of cultural (in)consistencies between stakeholders in system development and use. As an illustrative example of the kind of academic research...... that needs to be done, a pilot study is described. The pilot study exemplifies themes to explore, who should be participants and where should the study be done, how to find examples of multiple-country usability testing, how to collect data and how to analyse that data and what kind of results and discussion...

The Software Therapist: Usability Problem Diagnosis Through Latent Semantic Analysis

National Research Council Canada - National Science Library

Sparks, Randall; Hartson, Rex

2006-01-01

The work we report on here addresses the problem of low return on investment in software usability engineering and offers support for usability practitioners in identifying, understanding, documenting...

Examining the Use of Usability Results in a Software Development Company

DEFF Research Database (Denmark)

Høegh, Rune Thaarup; Stage, Jan

2004-01-01

This paper presents the first results of a study on a usability evaluation for a Danish software development company. The use of the results from the usability evaluation is examined through interviews with two developers from the software company. It is through an interview with a project leader...... from the company found that the traditional usability report plays a very little role for the development team. Initial results suggest that textual feedback proves more valuable when accompanied with video and oral feedback.......This paper presents the first results of a study on a usability evaluation for a Danish software development company. The use of the results from the usability evaluation is examined through interviews with two developers from the software company. It is through an interview with a project leader...

Wireless application guidelines for usability design and evaluation for developing countries

International Nuclear Information System (INIS)

Khoja, S.A.; Ursani, A.A.; Ali, A.

2009-01-01

The aim of this paper is to provide guidelines for designing wireless applications. These guidelines are developed with the help of Human Computer Interaction based Usability Evaluation surveys and tests results. These guidelines will help in making wireless applications more usable and attractive for users and will help designers to plan effective interactive applications. The guidelines presented in the paper have been derived from the results of surveys, usability tests and SET (Summative Evaluation Tests) carried out over 200 people of Karachi, Pakistan, from different walks of life with different academic and professional backgrounds, making imperative suggestions not only to improve the usability of exciting features given in wireless and mobile products, but also provide suggestions to improve usability of basic components such as, text, navigation, interactivity, multimedia, control and behavior. (author)

A Genome-Wide Association Study and Complex Network Identify Four Core Hub Genes in Bipolar Disorder

Directory of Open Access Journals (Sweden)

Zengyan Xie

2017-12-01

Full Text Available Bipolar disorder is a common and severe mental illness with unsolved pathophysiology. A genome-wide association study (GWAS has been used to find a number of risk genes, but it is difficult for a GWAS to find genes indirectly associated with a disease. To find core hub genes, we introduce a network analysis after the GWAS was conducted. Six thousand four hundred fifty eight single nucleotide polymorphisms (SNPs with p < 0.01 were sifted out from Wellcome Trust Case Control Consortium (WTCCC dataset and mapped to 2045 genes, which are then compared with the protein–protein network. One hundred twelve genes with a degree >17 were chosen as hub genes from which five significant modules and four core hub genes (FBXL13, WDFY2, bFGF, and MTHFD1L were found. These core hub genes have not been reported to be directly associated with BD but may function by interacting with genes directly related to BD. Our method engenders new thoughts on finding genes indirectly associated with, but important for, complex diseases.

Nonlinear model of a rotating hub-beams structure: Equations of motion

Science.gov (United States)

Warminski, Jerzy

2018-01-01

Dynamics of a rotating structure composed of a rigid hub and flexible beams is presented in the paper. A nonlinear model of a beam takes into account bending, extension and nonlinear curvature. The influence of geometric nonlinearity and nonconstant angular velocity on dynamics of the rotating structure is presented. The exact equations of motion and associated boundary conditions are derived on the basis of the Hamilton's principle. The simplification of the exact nonlinear mathematical model is proposed taking into account the second order approximation. The reduced partial differential equations of motion together with associated boundary conditions can be used to study natural or forced vibrations of a rotating structure considering constant or nonconstant angular speed of a rigid hub and an arbitrary number of flexible blades.

Fall from heights: does height really matter?

Science.gov (United States)

Alizo, G; Sciarretta, J D; Gibson, S; Muertos, K; Romano, A; Davis, J; Pepe, A

2018-06-01

Fall from heights is high energy injuries and constitutes a fraction of all fall-related trauma evaluations while bearing an increase in morbidity and mortality. We hypothesize that despite advancements in trauma care, the overall survivability has not improved in this subset of trauma patients. All adult trauma patients treated after sustaining a fall from heights during a 40-month period were retrospectively reviewed. Admission demographics, clinical data, fall height (ft), injury patterns, ISS, GCS, length of stay, and mortality were reviewed. 116 patients sustained a fall from heights, 90.4% accidental. A mean age of 37± 14.7 years, 86% male, and a fall height of 19 ± 10 ft were encountered. Admission GCS was 13 ± 2 with ISS 10 ± 11. Overall LOS was 6.6 ± 14.9 days and an ICU LOS of 2.8 ± 8.9 days. Falls ≥ 25 ft.(16%) had lower GCS 10.4 ± 5.8, increased ISS 22.6 ± 13.8, a fall height 37.9 ± 13.1 ft and associated increased mortality (p < 0.001). Mortality was 5.2%, a mean distance fallen of 39 ± 22 ft. and an ISS of 31.5 ±16.5. Brain injury was the leading cause of death, 50% with open skull fractures. Level of height fallen is a good predictor of overall outcome and survival. Despite advances in trauma care, death rates remain unchanged. Safety awareness and injury prevention programs are needed to reduce the risk of high-level falls.

Evaluating Distributed Usability: the role of user interfaces in an activity system

Directory of Open Access Journals (Sweden)

Lejla Vrazalic

2003-11-01

Full Text Available Traditional definitions of usability localise this fundamental Human Computer Interaction (HCI concept in the user interface and reduce it to a variety of qualitative and quantitative attributes of the computer system. This simplistic view of usability has been used as the basis for developing design and evaluation methods in the discipline. This paper argues that, as a result, HCI methods are ineffective and suffer from various shortcomings. It is proposed that the notion of usability must be extended to include contextual factors, and viewed as being distributed across an activity system. Adopting this notion of distributed usability then requires a review of existing HCI methods. Usability testing, as a complete and self-contained HCI method, was chosen for this purpose, and the result, a distributed usability evaluation method (DUEM, is presented in this paper.

IT investment decision making : Usability of a normative model

NARCIS (Netherlands)

Wijnhoven, Alphonsus B.J.M.; Heerkens, Johannes M.G.

This article analyzes the usability of a multi-criteria decision analysis based on a real options AHP (ROAHP) method for IT-investment decisions. The study presents ROAHP to Chief Information Officers (CIO’s) and collects their opinions on prerequisites for usability, strengths and weaknesses. To

Discovering the User: A Practical Glance at Usability Testing.

Science.gov (United States)

Campbell, Nicole; Walbridge, Sharon; Chisman, Janet; Diller, Karen R.

1999-01-01

This interview focuses on usability testing, one method for evaluating whether library Web sites are useful for users. Discussion includes: benefits and drawbacks of usability testing; why it is important; lessons learned from testing; advice for someone interested in doing a study; and recommendations. (AEF)

Accessibility and usability OCW data: The UTPL OCW

Directory of Open Access Journals (Sweden)

Germania Rodríguez

2017-08-01

Full Text Available This data article provides a data description on article entitled “A framework for improving web accessibility and usability of Open Course Ware sites” [3] This Data in Brief presents the data obtained from the accessibility and usability evaluation of the UTPL OCW. The data obtained from the framework evaluation consists of the manual evaluation of the standards criteria and the automatic evaluation of the tools Google PageSpeed and Google Analytics. In addition, this article presents the synthetized tables from standards that are used by the framework to evaluate the accessibility and usability of OCW, and the questionnaires required to extract the data. As a result, the article also provides the data required to reproduce the evaluation of other OCW.

Training Software Developers in Usability Engineering: A Literature Review

DEFF Research Database (Denmark)

Bruun, Anders

2010-01-01

. This paper presents a comprehensive literature study of research conducted in this area, where 129 papers are analyzed in terms of research focus, empirical basis, types of training participants and training costs. Findings show a need for further empirical research regarding long term effects of training...... to fund usability specialists or comprehensive consultancy. Training of non-usability personnel in critical usability engineering methods has the potential of easing these challenges. It is, however, unknown how much and what kind of research that has been committed to novice training in UE methods......, training costs and training in user based evaluation methods....

The evaluator effect in usability studies: Problem detection and severity judgments

DEFF Research Database (Denmark)

Jacobsen, Niels Ebbe; Hertzum, Morten; John, Bonnie E.

1998-01-01

Usability studies are commonly used in industry and applied in research as a yardstick for other usability evaluation methods. Though usability studies have been studied extensively, one potential threat to their reliability has been left virtually untouched: the evaluator effect. In this study......, four evaluators individually analyzed four videotaped usability test sessions. Only 20% of the 93 detected problems were detected by all evaluators, and 46% were detected by only a single evaluator. From the total set of 93 problems the evaluators individually selected the ten problems they considered...... most severe. None of the selected severe problems appeared on all four evaluators’ top-10 lists, and 4 of the 11 problems that were considered severe by more than one evaluator were only detected by one or two evaluators. Thus, both detection of usability problems and selection of the most severe...

Usability testing of interaction components: taking the message exchange as a measure of usability

NARCIS (Netherlands)

Brinkman, W.P.; Haakma, R.; Bouwhuis, D.G.; Jacob, R.J.K.; Limbourg, Q; Vanderdonckt, J.

2004-01-01

Component-based Software Engineering (CBSE) is concerned with the development of systems from reusable parts (components), and the development and maintenance of these parts. This study addresses the issue of usability testing in a CBSE environment, and specifically automatically measuring the

OPTIMIZING USABILITY OF AN ECONOMIC DECISION SUPPORT TOOL: PROTOTYPE OF THE EQUIPT TOOL.

Science.gov (United States)

Cheung, Kei Long; Hiligsmann, Mickaël; Präger, Maximilian; Jones, Teresa; Józwiak-Hagymásy, Judit; Muñoz, Celia; Lester-George, Adam; Pokhrel, Subhash; López-Nicolás, Ángel; Trapero-Bertran, Marta; Evers, Silvia M A A; de Vries, Hein

2018-01-01

Economic decision-support tools can provide valuable information for tobacco control stakeholders, but their usability may impact the adoption of such tools. This study aims to illustrate a mixed-method usability evaluation of an economic decision-support tool for tobacco control, using the EQUIPT ROI tool prototype as a case study. A cross-sectional mixed methods design was used, including a heuristic evaluation, a thinking aloud approach, and a questionnaire testing and exploring the usability of the Return of Investment tool. A total of sixty-six users evaluated the tool (thinking aloud) and completed the questionnaire. For the heuristic evaluation, four experts evaluated the interface. In total twenty-one percent of the respondents perceived good usability. A total of 118 usability problems were identified, from which twenty-six problems were categorized as most severe, indicating high priority to fix them before implementation. Combining user-based and expert-based evaluation methods is recommended as these were shown to identify unique usability problems. The evaluation provides input to optimize usability of a decision-support tool, and may serve as a vantage point for other developers to conduct usability evaluations to refine similar tools before wide-scale implementation. Such studies could reduce implementation gaps by optimizing usability, enhancing in turn the research impact of such interventions.

Electric wheel hub motor; Elektrischer Radnabenmotor

Energy Technology Data Exchange (ETDEWEB)

Groeninger, Michael; Kock, Alexander [IFAM Bremen (Germany); Horch, Felix [IFAM Bremen (Germany). Komponentenentwicklung; Pleteit, Hermann [IFAM Bremen (Germany). Abt. Giessereitechnologie und Komponentenentwicklung

2012-02-15

The bundled competences of the participating Fraunhofer Institutes have made it possible to develop a wheel hub motor that has essentially overcome currently existing technical hurdles, enabling its use in a vehicle. In addition to direct technical challenges such as sealing against external influences, high bearing stiffness requirements, necessary high torque densities and simple integration in the chassis, the safety aspects required by modern vehicles were also taken into account. A drive system that guarantees safe driving states, even in the case of malfunction, was developed through the combination of recuperative braking with a classic mechanical braking system and redundant motor design. (orig.)

Usability in product development practice; an exploratory case study comparing four markets.

Science.gov (United States)

van Kuijk, Jasper; van Driel, Liesbeth; van Eijk, Daan

2015-03-01

This study explored how usability was dealt with in four product development organizations active in different sectors: high-end automotive, professional printers and copiers, office coffee makers and fast moving consumer goods. The primary differentiators of the selected cases were whether they were targeting businesses or consumers and the degree of product complexity. Interviews with 19 product development practitioners were conducted, focussing on three topics: 1) the product development process and the integration of user involvement, 2) multidisciplinary teamwork, and 3) organizational attitude towards usability. Based on the interviews, context descriptions of the companies were created and barriers and enablers for usability were identified. To verify the findings and to discuss remaining issues a feedback workshop was held in which the primary contact from each company participated. The results indicate that differences in product-market combination lead to differences in organizational attitude towards usability. The prioritization of usability in an organization seems to be influenced by the degree of product complexity (complex products are more prone to suffer from usability issues) and whether developers think that usability is a purchase consideration for their clients. The product-market combination a company targets also affects the methods for user-centred design that a company can apply and that are relevant. What methods for user-centred design are used also seems to be influenced by the attitude towards usability: if usability is considered more important, methods that require more resources can be applied. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Using hub technology to facilitate information system integration in a health-care enterprise.

Science.gov (United States)

Gendler, S M; Friedman, B A; Henricks, W H

1996-04-01

The deployment and maintenance of multiple point-to-point interfaces between a clinical information system, such as a laboratory information system, and other systems within a healthcare enterprise is expensive and time consuming. Moreover, the demand for such interfaces is increasing as hospitals consolidate and clinical laboratories participate in the development of regional laboratory networks and create host-to-host links with laboratory outreach clients. An interface engine, also called a hub, is an evolving technology that could replace multiple point-to-point interfaces from a laboratory information system with a single interface to the hub, preferably HL7 based. The hub then routes and translates laboratory information to other systems within the enterprise. Changes in application systems in an enterprise where a centralized interface engine has been implemented then amount to thorough analysis, an update of the enterprise's data dictionary, purchase of a single new vendor-supported interface, and table-based parameter changes on the hub. Two other features of an interface engine, support for structured query language and information store-and-forward, will facilitate the development of clinical data repositories and provide flexibility when interacting with other host systems. This article describes the advantages and disadvantages of an interface engine and lists some problems not solved by the technology. Finally, early developmental experience with an interface engine at the University of Michigan Medical Center and the benefits of the project on system integration efforts are described, not the least of which has been the enthusiastic adoption of the HL7 standard for all future interface projects.

Spectral Analysis of the Wake behind a Helicopter Rotor Hub

Science.gov (United States)

Petrin, Christopher; Reich, David; Schmitz, Sven; Elbing, Brian

2016-11-01

A scaled model of a notional helicopter rotor hub was tested in the 48" Garfield Thomas Water Tunnel at the Applied Research Laboratory Penn State. LDV and PIV measurements in the far-wake consistently showed a six-per-revolution flow structure, in addition to stronger two- and four-per-revolution structures. These six-per-revolution structures persisted into the far-field, and have no direct geometric counterpart on the hub model. The current study will examine the Reynolds number dependence of these structures and present higher-order statistics of the turbulence within the wake. In addition, current activity using the EFPL Large Water Tunnel at Oklahoma State University will be presented. This effort uses a more canonical configuration to identify the source for these six-per-revolution structures, which are assumed to be a non-linear interaction between the two- and four-per-revolution structures.

Using a fuzzy comprehensive evaluation method to determine product usability: A test case.

Science.gov (United States)

Zhou, Ronggang; Chan, Alan H S

2017-01-01

In order to take into account the inherent uncertainties during product usability evaluation, Zhou and Chan [1] proposed a comprehensive method of usability evaluation for products by combining the analytic hierarchy process (AHP) and fuzzy evaluation methods for synthesizing performance data and subjective response data. This method was designed to provide an integrated framework combining the inevitable vague judgments from the multiple stages of the product evaluation process. In order to illustrate the effectiveness of the model, this study used a summative usability test case to assess the application and strength of the general fuzzy usability framework. To test the proposed fuzzy usability evaluation framework [1], a standard summative usability test was conducted to benchmark the overall usability of a specific network management software. Based on the test data, the fuzzy method was applied to incorporate both the usability scores and uncertainties involved in the multiple components of the evaluation. Then, with Monte Carlo simulation procedures, confidence intervals were used to compare the reliabilities among the fuzzy approach and two typical conventional methods combining metrics based on percentages. This case study showed that the fuzzy evaluation technique can be applied successfully for combining summative usability testing data to achieve an overall usability quality for the network software evaluated. Greater differences of confidence interval widths between the method of averaging equally percentage and weighted evaluation method, including the method of weighted percentage averages, verified the strength of the fuzzy method.

On the interconnection of stable protein complexes: inter-complex hubs and their conservation in Saccharomyces cerevisiae and Homo sapiens networks.

Science.gov (United States)

Guerra, Concettina

2015-01-01

Protein complexes are key molecular entities that perform a variety of essential cellular functions. The connectivity of proteins within a complex has been widely investigated with both experimental and computational techniques. We developed a computational approach to identify and characterise proteins that play a role in interconnecting complexes. We computed a measure of inter-complex centrality, the crossroad index, based on disjoint paths connecting proteins in distinct complexes and identified inter-complex hubs as proteins with a high value of the crossroad index. We applied the approach to a set of stable complexes in Saccharomyces cerevisiae and in Homo sapiens. Just as done for hubs, we evaluated the topological and biological properties of inter-complex hubs addressing the following questions. Do inter-complex hubs tend to be evolutionary conserved? What is the relation between crossroad index and essentiality? We found a good correlation between inter-complex hubs and both evolutionary conservation and essentiality.

Website Usability in Asia “From Within”

DEFF Research Database (Denmark)

Nawaz, Ather; Clemmensen, Torkil

2013-01-01

As the number of website users in Asia grows, there is an increasing need to gain an overview of human–computer interaction (HCI) research about users and websites in that context. This article presents an overview of HCI research on website usability in Asia “from within,” which outlines...... discusses the results and the need for a greater sensitivity to what is “local” and “from within” in HCI research and what this can add to the existing literature on website usability....

Usability challenges in an Ethiopian software development organization

DEFF Research Database (Denmark)

Teka, Degif; Dittrich, Yvonne; Kifle, Mesfin

2016-01-01

Usability and user centered design (UCD) are central to software development. In developing countries, the gap between IT development and the local use situation is larger than in western countries. However, usability is neither well addressed in software practice nor at the policy making level...... in Ethiopia. Software practitioners focus on functional requirements, meeting deadlines and budget. The software development industry in Ethiopia is in its early stage. The article aims at understanding usability practices in an Ethiopian software development company. Developers, system analysts, product...... configuration, their experience, cultural knowledge and common sense regarding the users' situation guided the design. Prototypes and fast delivery of working versions helped in getting user feedback even if early user focus proved to be a challenge as communication between developers and users suffered from...

Usability Briefing - a process model for healthcare facilities

DEFF Research Database (Denmark)

Fronczek-Munter, Aneta

2014-01-01

Background: In complex buildings with many types of users it can be difficult to satisfy the numerous, often contradictory requirements. Research in usability mostly focuses on evaluating products or facilities with users, after they were built. This paper is part of a PhD project “Usability...... with various users/stakeholders, using creative boundary objects at workshops.  Practical Implications: The research results have relevance to researchers, client organisations, facility managers and architects planning new complex facilities.  Research limitations: The proposed model is theoretical and needs...... briefing for hospitals”, where methods for capturing user needs and experiences at hospital facilities are investigated in order to feed into design processes and satisfy the users’ needs and maximise the effectiveness of facilities. Purpose: This paper introduces the concept of usability briefing...

Usability evaluation model for mobile e-book applications

Science.gov (United States)

Matraf, Munya Saleh Ba; Hussain, Azham

2017-10-01

Evaluation for mobile e-book applications are limited and did not address all the important usability measurements. Hence, this study aimed to identify the characteristics that affect user satisfaction on the usability of mobile e-book applications. Five characteristics that have a significant effect on the user satisfaction of mobile e-book applications have been identified namely readability, effectiveness, accessibility, efficiency, and navigation. A usability evaluation was conducted on three mobile e-book applications namely Adobe Acrobat Reader, Ebook Reader, and Amazon Kindle. 30 students from Universiti Utara Malaysia evaluated the mobile e-book applications and their satisfaction was measured using questionnaire. The outcomes discovered that the five characteristics have a significant positive relationship with user satisfaction. This provides insights into the main characteristics that increase user satisfaction.

Usability evaluation of augmented reality user interfaces in games and personal navigation assistants

OpenAIRE

Ivanec, Zorian

2017-01-01

This paper studies heuristic usability evaluation of user interfaces. The literature review distinguishes characteristics of augmented reality and smartphones, presents heuristic evaluation, PACMAD usability model, personal navigation assistants, video games, augmented reality and J. Nielsen usability heuristics. In research part, usability heuristics of related subject fields and design guidelines are combined. Created heuristics and control questionnaire are used for evaluation of augmented...

Investigating the effect of m-commerce design usability on customers' trust

Science.gov (United States)

Hussain, Azham Bin; Mahmood, Alaa Thamer; Naser, Raed Kamil

2017-10-01

User experience may vary from one user to another based on the design characteristics for processing a certain task. Our review of the literature revealed that there is a noticeable lack of studies on the effect of mobile or m-commerce design usability on customers' trust to perform certain activities. We investigated the effect of m-commerce design usability in terms of navigability, supportability, readability, creditability, and content relevant. A close-ended questionnaire was distributed to 20 customers who were asked to perform some tasks. The result showed that majority of the participants found m-commerce design usability to influence their trust of the app. The mentioned usability elements were found to positively influence customers' trust except for supportability. Our findings provide some insights to the m-commerce designers and developers and extend the current understanding about the potential of design usability in explaining users' usage behavior.

The AutoProof Verifier: Usability by Non-Experts and on Standard Code

Directory of Open Access Journals (Sweden)

Carlo A. Furia

2015-08-01

Full Text Available Formal verification tools are often developed by experts for experts; as a result, their usability by programmers with little formal methods experience may be severely limited. In this paper, we discuss this general phenomenon with reference to AutoProof: a tool that can verify the full functional correctness of object-oriented software. In particular, we present our experiences of using AutoProof in two contrasting contexts representative of non-expert usage. First, we discuss its usability by students in a graduate course on software verification, who were tasked with verifying implementations of various sorting algorithms. Second, we evaluate its usability in verifying code developed for programming assignments of an undergraduate course. The first scenario represents usability by serious non-experts; the second represents usability on "standard code", developed without full functional verification in mind. We report our experiences and lessons learnt, from which we derive some general suggestions for furthering the development of verification tools with respect to improving their usability.

Training Software Developers and Designers to Conduct Usability Evaluations

Science.gov (United States)

Skov, Mikael Brasholt; Stage, Jan

2012-01-01

Many efforts to improve the interplay between usability evaluation and software development rely either on better methods for conducting usability evaluations or on better formats for presenting evaluation results in ways that are useful for software designers and developers. Both of these approaches depend on a complete division of work between…

Ten factors to consider when developing usability scenarios and tasks for health information technology.

Science.gov (United States)

Russ, Alissa L; Saleem, Jason J

2018-02-01

The quality of usability testing is highly dependent upon the associated usability scenarios. To promote usability testing as part of electronic health record (EHR) certification, the Office of the National Coordinator (ONC) for Health Information Technology requires that vendors test specific capabilities of EHRs with clinical end-users and report their usability testing process - including the test scenarios used - along with the results. The ONC outlines basic expectations for usability testing, but there is little guidance in usability texts or scientific literature on how to develop usability scenarios for healthcare applications. The objective of this article is to outline key factors to consider when developing usability scenarios and tasks to evaluate computer-interface based health information technologies. To achieve this goal, we draw upon a decade of our experience conducting usability tests with a variety of healthcare applications and a wide range of end-users, to include healthcare professionals as well as patients. We discuss 10 key factors that influence scenario development: objectives of usability testing; roles of end-user(s); target performance goals; evaluation time constraints; clinical focus; fidelity; scenario-related bias and confounders; embedded probes; minimize risks to end-users; and healthcare related outcome measures. For each factor, we present an illustrative example. This article is intended to aid usability researchers and practitioners in their efforts to advance health information technologies. The article provides broad guidance on usability scenario development and can be applied to a wide range of clinical information systems and applications. Published by Elsevier Inc.

Usability inspection to improve an electronic provincial medication repository.

Science.gov (United States)

Kitson, Nicole A; Price, Morgan; Bowen, Michael; Lau, Francis

2013-01-01

Medication errors are a significant source of actual and potential harm for patients. Community medication records have the potential to reduce medication errors, but they can also introduce unintended consequences when there is low fit to task (low cognitive fit). PharmaNet is a provincially managed electronic repository that contains the records for community-based pharmacy-dispensed medications in British Columbia. This research explores the usability of PharmaNet, as a representative community-based medication repository. We completed usability inspections of PharmaNet through vendor applications. Vendor participants were asked to complete activity-driven scenarios, which highlighted aspects of medication management workflow. Screen recording was later reviewed. Heuristics were applied to explore usability issues and improvement opportunities. Usability inspection was conducted with four PharmaNet applications. Ninety-six usability issues were identified; half of these had potential implications for patient safety. These were primarily related to login and logout procedures; display of patient name; display of medications; update and display of alert information; and the changing or discontinuation of medications. PharmaNet was designed primarily to support medication dispensing and billing activities by community pharmacies, but is also used to support care providers with monitoring and prescribing activities. As such, some of the features do not have a strong fit for other clinical activities. To improve fit, we recommend: having a Current Medications List and Displaying Medication Utilization Charts.

Modelling energy demand for a fleet of hydrogen-electric vehicles interacting with a clean energy hub

International Nuclear Information System (INIS)

Syed, F.; Fowler, M.; Wan, D.; Maniyali, Y.

2009-01-01

This paper details the development of an energy demand model for a hydrogen-electric vehicle fleet and the modelling of the fleet interactions with a clean energy hub. The approach taken is to model the architecture and daily operation of every individual vehicle in the fleet. A generic architecture was developed based on understanding gained from existing detailed models used in vehicle powertrain design, with daily operation divided into two periods: charging and travelling. During the charging period, the vehicle charges its Electricity Storage System (ESS) and refills its Hydrogen Storage System (HSS), and during the travelling period, the vehicle depletes the ESS and HSS based on distance travelled. Daily travel distance is generated by a stochastic model and is considered an input to the fleet model. The modelling of a clean energy hub is also presented. The clean energy hub functions as an interface between electricity supply and the energy demand (i.e. hydrogen and electricity) of the vehicle fleet. Finally, a sample case is presented to demonstrate the use of the fleet model and its implications on clean energy hub sizing. (author)

Usability Studies and User-Centered Design in Digital Libraries

Science.gov (United States)

Comeaux, David J.

2008-01-01

Digital libraries continue to flourish. At the same time, the principles of user-centered design and the practice of usability testing have been growing in popularity, spreading their influence into the library sphere. This article explores the confluence of these two trends by surveying the current literature on usability studies of digital…

Design and Analysis of a Novel Speed-Changing Wheel Hub with an Integrated Electric Motor for Electric Bicycles

Directory of Open Access Journals (Sweden)

Yi-Chang Wu

2013-01-01

Full Text Available The aim of this paper is to present an innovative electromechanical device which integrates a brushless DC (BLDC hub motor with a speed-changing wheel hub stored on the rear wheel of an electric bicycle. It combines a power source and a speed-changing mechanism to simultaneously provide functions of power generation and transmission for electric bicycles. As part of the proposed integrated device, the wheel hub consists of a basic planetary gear train providing three forward speeds including a low-speed gear, a direct drive, and a high-speed gear. Each gear is manually controlled by the shift control sleeve to selectively engage or disengage four pawl-and-ratchet clutches based on its clutching sequence table. The number of gear teeth of each gear element of the wheel hub is synthesized. The BLDC hub motor is an exterior-rotor-type permanent-magnet synchronous motor. Two-dimensional finite-element analysis (FEA software is employed to facilitate the motor design and performance analysis. An analysis of the power transmission path at each gear is provided to verify the validity of the proposed design. The results of this work are beneficial to the embodiment, design, and development of novel electromechanical devices for the power and transmission systems of electric bicycles.

A framework for creating an ICT knowledge hub in Zimbabwe: A holistic approach in fostering economic growth

Directory of Open Access Journals (Sweden)

Gilbert Mahlangu

2018-01-01

Full Text Available ICT knowledge hubs are important resources for a country to grow towards an innovative economy. Their growth has been viewed as a node point for techno-prenuership development and economic sustainability by many countries. The purpose of this study was to establish how Zimbabwe as a developing country should move towards the creation of an ICT knowledge hub that will promote economic growth in line with the Zimbabwe Agenda for Sustainable Socio-Economic Transformation (ZimAsset economic blueprint crafted in 2013. A qualitative research design was used whereby literature was conducted to establish models for ICT Knowledge hub creation while two focus group discussions were held with academia, research agents and software developers to achieve face validity and in-depth interviews were held with officials from The Ministry of ICT Postal and Courier services. The consensus was reached on the need for creating a focal point which will act as a cyber-port where ICT driven solutions can be obtained based on the industry needs. The focus group discussions settled for four components in creating an ICT knowledge hub. These are planning function, development function, management function and co-ordinating function. The research also established that the Ministry of ICT and Courier services in Zimbabwe has set up an innovation fund to encourage and reward innovation and craftsmanship in Zimbabwe mainly targeted at the youths. The government acquired the high-performance computing facility which is stationed at the University of Zimbabwe. The ICT hub should be used to facilitate access and use of this resource. Every country should therefore strive to create its own centre of innovation which enables it to gain maximum utility from its indigenous people in order to fully utilise ICTs for industry development and spearhead economic growth. The study recommends that there is need for establishing an ICT Knowledge hub in the country.

Public Transportation Hub Location with Stochastic Demand: An Improved Approach Based on Multiple Attribute Group Decision-Making

Directory of Open Access Journals (Sweden)

Sen Liu

2015-01-01

Full Text Available Urban public transportation hubs are the key nodes of the public transportation system. The location of such hubs is a combinatorial problem. Many factors can affect the decision-making of location, including both quantitative and qualitative factors; however, most current research focuses solely on either the quantitative or the qualitative factors. Little has been done to combine these two approaches. To fulfill this gap in the research, this paper proposes a novel approach to the public transportation hub location problem, which takes both quantitative and qualitative factors into account. In this paper, an improved multiple attribute group decision-making (MAGDM method based on TOPSIS (Technique for Order Preference by Similarity to Ideal Solution and deviation is proposed to convert the qualitative factors of each hub into quantitative evaluation values. A location model with stochastic passenger flows is then established based on the above evaluation values. Finally, stochastic programming theory is applied to solve the model and to determine the location result. A numerical study shows that this approach is applicable and effective.

Usability study of youtube websites for Malaysian teenagers

Science.gov (United States)

Razak, Mohd Nur Faiz Abd; Hussain, Azham; Hamdi, Mohd Maizan Fishol

2017-10-01

Nowadays, YouTube is the 3rd most visited website in the world. It was created for users to search, watch and share video. Statistics show that YouTube run in more than 88 countries and support 76 different languages which covered almost 95% of Internet population globally. Therefore, a usability study is for specific type of users such as based on gender, range of age and country is considered a must for this kind of top website. In this study, we focus on YouTube website usability for Malaysian teenagers that are currently schooling in boarding school with limited access of Internet. It was done in a controlled lab environment with proper devices and software as MacBook, LCD Monitor, and WhatPulse heat map tracker. The evaluation was made based on usability metrics: ease of use, usefulness and satisfaction of users with combination of recording videos, mouse and keyboard heat map and questionnaires. Findings show that most of the respondents just use YouTube for video watching only while ignoring other features in the same time. There are difficulties in using it at the first moment but could catch up in short time. It shows how usable YouTube website especially in the learnability and memorability aspects.

Comparison of CTA and Textual Feedback in Usability Testing for Malaysian Users

DEFF Research Database (Denmark)

Sivaji, Ashok; Clemmensen, Torkil; Nielsen, Søren Feodor

Usability moderators found that the concurrent think-aloud (CTA) method has some cultural limitation that impacts usability testing with Malaysian users. This gives rise to proposing a new method called textual feedback. The research question is to determine whether there are any differences...... in usability defects from the concurrent think-aloud (CTA) method (Condition 2) and textual feedback method (Condition 1) within the same group of Malaysian users. A pair-wise t-test was used, whereby users were subjected to performing usability task using both methods. Results reveal that we can reject...

Channel Bonding in Linux Ethernet Environment using Regular Switching Hub

Directory of Open Access Journals (Sweden)

Chih-wen Hsueh

2004-06-01

Full Text Available Bandwidth plays an important role for quality of service in most network systems. There are many technologies developed to increase host bandwidth in a LAN environment. Most of them need special hardware support, such as switching hub that supports IEEE Link Aggregation standard. In this paper, we propose a Linux solution to increase the bandwidth between hosts with multiple network adapters connected to a regular switching hub. The approach is implemented as two Linux kernel modules in a LAN environment without modification to the hardware and operating systems on host machines. Packets are dispatched to bonding network adapters for transmission. The proposed approach is backward compatible, flexible and transparent to users and only one IP address is needed for multiple bonding network adapters. Evaluation experiments in TCP and UDP transmission are shown with bandwidth gain proportionally to the number of network adapters. It is suitable for large-scale LAN systems with high bandwidth requirement, such as clustering systems.

An Airlift Hub-and-Spoke Location-Routing Model with Time Windows: Case Study of the CONUS-to-Korea Airlift Problem

National Research Council Canada - National Science Library

Cox, David

1998-01-01

.... This study develops an alternative hub-and-spoke combined location-routing integer linear programming prototype model, and uses this model to determine what advantages a hub-and-spoke system offers...

Managing the cellular redox hub in photosynthetic organisms.

Science.gov (United States)

Foyer, Christine H; Noctor, Graham

2012-02-01

Light-driven redox chemistry is a powerful source of redox signals that has a decisive input into transcriptional control within the cell nucleus. Like photosynthetic electron transport pathways, the respiratory electron transport chain exerts a profound control over gene function, in order to balance energy (reductant and ATP) supply with demand, while preventing excessive over-reduction or over-oxidation that would be adversely affect metabolism. Photosynthetic and respiratory redox chemistries are not merely housekeeping processes but they exert a controlling influence over every aspect of plant biology, participating in the control of gene transcription and translation, post-translational modifications and the regulation of assimilatory reactions, assimilate partitioning and export. The number of processes influenced by redox controls and signals continues to increase as do the components that are recognized participants in the associated signalling pathways. A step change in our understanding of the overall importance of the cellular redox hub to plant cells has occurred in recent years as the complexity of the management of the cellular redox hub in relation to metabolic triggers and environmental cues has been elucidated. This special issue describes aspects of redox regulation and signalling at the cutting edge of current research in this dynamic and rapidly expanding field. © 2011 Blackwell Publishing Ltd.

A literature review about usability evaluation methods for e-learning platforms.

Science.gov (United States)

Freire, Luciana Lopes; Arezes, Pedro Miguel; Campos, José Creissac

2012-01-01

The usability analysis of information systems has been the target of several research studies over the past thirty years. These studies have highlighted a great diversity of points of view, including researchers from different scientific areas such as Ergonomics, Computer Science, Design and Education. Within the domain of information ergonomics, the study of tools and methods used for usability evaluation dedicated to E-learning presents evidence that there is a continuous and dynamic evolution of E-learning systems, in many different contexts -academics and corporative. These systems, also known as LMS (Learning Management Systems), can be classified according to their educational goals and their technological features. However, in these systems the usability issues are related with the relationship/interactions between user and system in the user's context. This review is a synthesis of research project about Information Ergonomics and embraces three dimensions, namely the methods, models and frameworks that have been applied to evaluate LMS. The study also includes the main usability criteria and heuristics used. The obtained results show a notorious change in the paradigms of usability, with which it will be possible to discuss about the studies carried out by different researchers that were focused on usability ergonomic principles aimed at E-learning.

Evaluating Usability of E-Learning Systems in Universities

OpenAIRE

Nicholas Kipkurui Kiget; Professor G. Wanyembi; Anselemo Ikoha Peters

2014-01-01

The use of e-learning systems has increased significantly in the recent times. E-learning systems are supplementing teaching and learning in universities globally. Kenyan universities have adopted e-learning technologies as means for delivering course content. However despite adoption of these systems, there are considerable challenges facing the usability of the systems. Lecturers and students have different perceptions in regard to the usability of e-learning systems. The aim of this study ...

A Comparison of What Is Part of Usability Testing in Three Countries

Science.gov (United States)

Clemmensen, Torkil

The cultural diversity of users of technology challenges our methods for usability evaluation. In this paper we report and compare three ethnographic interview studies of what is a part of a standard (typical) usability test in a company in Mumbai, Beijing and Copenhagen. At each of these three locations, we use structural and contrast questions do a taxonomic and paradigm analysis of a how a company performs a usability test. We find similar parts across the three locations. We also find different results for each location. In Mumbai, most parts of the usability test are not related to the interactive application that is tested, but to differences in user characteristics, test preparation, method, and location. In Copenhagen, considerations about the client's needs are part of a usability test. In Beijing, the only varying factor is the communication pattern and relation to the user. These results are then contrasted in a cross cultural matrix to identify cultural themes that can help interpret results from existing laboratory research in usability test methods.

Pilot implementation Driven by Effects Specifications and Formative Usability Evaluation

DEFF Research Database (Denmark)

Barlach, Anders; Hertzum, Morten; Simonsen, Jesper

2013-01-01

This chapter reports on the usability-engineering work performed throughout the pilot implementation of an Electronic Healthcare Record (EHR). The case describes and analyzes the use of pilot implementations to formatively evaluate whether the usability of the EHR meets the effects specified for ...

Methods in Mapping Usability of Malaysia’s Shopping Centre

Directory of Open Access Journals (Sweden)

Abdul Ghani Aida Affina

2016-01-01

Full Text Available With more than 200 number of shopping centre in Klang Valley itself, we the consumer actually have vast of choices. Instead of the machineries varieties from the lower class product till the posh one, each of those shopping centres eventually offers the typical product same as others. Those shopping centers are competing with each other and in great endeavour to attract more consumers, to visit and spend. As for the visitor, the typical product and boring ambience seems similar in all malls, and is looking something beyond the standard. Something that promising quality embedded in shopping centre which evokes the various emotions of the user along their journey in malls. This quality is known as usability. Usability; as defined generally is a global user’s experience response with product, environment, service or facilities. It is an assessment in extracting the qualities of shopping centre design. In mapping it, there are a few synthesizing methods to implement it. Therefore, this paper purposely to review the method that been used in usability of Malaysia’s shopping centre research with a few references on previous research done in usability assessment by predecessor’s scholars. With the accentuation on three elements that anchoring what the usability is: effectiveness, efficient and satisfaction, it is hope that this overview can lead other researcher in portraying its relationship with the quality and ‘user friendly’ design of shopping centre.

Methods uncovering usability issues in medication-related alerting functions: results from a systematic review.

Science.gov (United States)

Marcilly, Romaric; Vasseur, Francis; Ammenwerth, Elske; Beuscart-Zephir, Marie-Catherine

2014-01-01

This paper aims at listing the methods used to evaluate the usability of medication-related alerting functions and at knowing what type of usability issues those methods allow to detect. A sub-analysis of data from this systematic review has been performed. Methods applied in the included papers were collected. Then, included papers were sorted in four types of evaluation: "expert evaluation", "user- testing/simulation", "on site observation" and "impact studies". The types of usability issues (usability flaws, usage problems and negative outcomes) uncovered by those evaluations were analyzed. Results show that a large set of methods are used. The largest proportion of papers uses "on site observation" evaluation. This is the only evaluation type for which every kind of usability flaws, usage problems and outcomes are detected. It is somehow surprising that, in a usability systematic review, most of the papers included use a method that is not often presented as a usability method. Results are discussed about the opportunity to provide usability information collected after the implementation of the technology during their design process, i.e. before their implementation.

A new transport hub

CERN Multimedia

Corinne Pralavorio

2016-01-01

CERN’s new Mobility Centre, allowing you to switch easily from one mode of transport to another, has just been officially opened.   Inauguration of the CERN Mobility Centre by Martin Steinacher, Director for Finance and Human Resources, and Lluis Miralles, Head of the SMB department. CERN’s new Mobility Centre, on the car park next to the Globe of Science and Innovation was officially opened on Tuesday, 22 March. The centre brings together all of CERN’s transport options in a single location. "Our aim is to create an intermodal hub where CERN users and personnel can switch from one mode of transport to another, and from CERN transport to public transport," explains Lluis Miralles, head of the Site Management and Buildings (SMB) department. The Mobility Centre incorporates the CERN bike and car rental services, the self-service car- and bike-sharing schemes, and SIXT car rental facilities (for long-distance journeys). It is located right ne...

Integrated System Validation Usability Questionnaire: Computerized Procedures

International Nuclear Information System (INIS)

Garcés, Ma. I.; Torralba, B.

2015-01-01

The Research and Development (R&D) project on “Theoretical and Methodological Approaches to Integrated System Validation of Control Rooms, 2014-2015”, in which the research activities described in this report are framed, has two main objectives: to develop the items for an usability methodology conceived as a part of the measurement framework for performance-based control room evaluation that the OECD Halden Reactor Project will test in the experiments planned for 2015; and the statistical analysis of the data generated in the experimental activities of the Halden Man-Machine Laboratory (HAMMLAB) facility, with previous usability questionnaires, in 2010 and 2011. In this report, the procedure designed to meet the first goal of the project is described, in particular, the process followed to identify the items related to operating procedures, both computer and paper-based, one of the elements to be included in the usability questionnaire. Three phases are performed, in the first one, the approaches developed by the United States Nuclear Regulatory Commission, NRC, are reviewed, the models used by the nuclear industry and their technical support organizations, mainly, the Electric Power Research Institute, EPRI, are analyzed, and scientist advances are also explored. In the remaining stages, general and specific guidelines for computerized and paper-based procedures are compared and criteria for the preliminary selection of the items that should be incorporated into the usability questionnaire are defined. This proposal will be reviewed and adapted by the Halden Reactor Project to the design of the specific experiments performed in HAMLAB.

Deconstructing Hub Drag. Part 2. Computational Development and Anaysis

Science.gov (United States)

2013-09-30

leveraged a Vertical Lift Consortium ( VLC )-funded hub drag scaling research effort. To confirm this objective, correlations are performed with the...Technology™ Demonstrator aircraft using an unstructured computational solver. These simpler faired elliptical geome- tries can prove to be challenging ...possible. However, additional funding was obtained from the Vertical Lift Consortium ( VLC ) to perform this study. This analysis is documented in

The current status of usability studies of information technologies in China: a systematic study.

Science.gov (United States)

Lei, Jianbo; Xu, Lufei; Meng, Qun; Zhang, Jiajie; Gong, Yang

2014-01-01

To systematically review and analyze the current status and characteristics of usability studies in China in the field of information technology in general and in the field of healthcare in particular. We performed a quantitative literature analysis in three major Chinese academic databases and one English language database using Chinese search terms equivalent to the concept of usability. Six hundred forty-seven publications were selected for analysis. We found that in China the literature on usability in the field of information technology began in 1994 and increased thereafter. The usability definitions from ISO 9241-11:1998 and Nielsen (1993) have been widely recognized and cited. Authors who have published several publications are rare. Fourteen journals have a publishing rate over 1%. Only nine publications about HIT were identified. China's usability research started relatively late. There is a lack of organized research teams and dedicated usability journals. High-impact theoretical studies are scarce. On the application side, no original and systematic research frameworks have been developed. The understanding and definition of usability is not well synchronized with international norms. Besides, usability research in HIT is rare. More human and material resources need to be invested in China's usability research, particularly in HIT.

Usability principles to design mobile workplace learning content

Directory of Open Access Journals (Sweden)

Alessia Messuti

2015-04-01

Full Text Available The article describes the design of a mobile workplace learning tool for trainers of the International Training Centre of the International Labour Organization. The motivation behind is to provide trainers with a practical tool that will enable them to recall information at the moment of need and continue to learn in context. On this purpose a set of visual augmented reality cards was created, taking into consideration the fundamental mobile learning and usability principles. The nature of the article is empirical as it reports an experiment carried out with trainers which aimed at testing cards usability and learnability. Results show that the integration of both online and offline strategies was perceived as an added value as trainers could choose to retrieve information as they mostly like; finally, it also resulted in high usability scores, an aspect that contributes to their effectiveness at the workplace.

On the Usability of Spoken Dialogue Systems

DEFF Research Database (Denmark)

Larsen, Lars Bo

 This work is centred on the methods and problems associated with defining and measuring the usability of Spoken Dialogue Systems (SDS). The starting point is the fact that speech based interfaces has several times during the last 20 years fallen short of the high expectations and predictions held...... by industry, researchers and analysts. Several studies in the literature of SDS indicate that this can be ascribed to a lack of attention from the speech technology community towards the usability of such systems. The experimental results presented in this work are based on a field trial with the OVID home...

Does Branding Need Web Usability? A Value-Oriented Empirical Study

Science.gov (United States)

Bolchini, Davide; Garzotto, Franca; Sorce, Fabio

Does usability of a web-based communication artifact affect brand, i.e., the set of beliefs, emotions, attitudes, or qualities that people mentally associate to the entity behind that artifact? Intuitively, the answer is “yes”: usability is a fundamental aspect of the quality of the experience with a website, and a “good” experience with a “product” or its reifications tends to translate into “good” brand perception. To date, however, the existence of a connection between web usability and brand perception is shown through anecdotic arguments, and is not supported by published systematic research. This paper discusses a study that empirically investigates this correlation in a more rigorous, analytical, and replicable way. Our main contribution is twofold: on the one hand, we provide empirical evidence to the heuristic principle that web usability influences branding, and we do that through four between subjects controlled experiments that involved 120 subjects. On the other hand, we inform the study with a systematic value-oriented approach to the user experience, and thus provide a conceptual framework that can be reused in other experimental settings, either for replicating our study, or for designing similar studies focusing on the correlation of web branding vs. design factors other than usability.

Human factors related to time-dependent infection control measures: "Scrub the hub" for venous catheters and feeding tubes.

Science.gov (United States)

Caspari, Lindsay; Epstein, Elizabeth; Blackman, Amy; Jin, Li; Kaufman, David A

2017-06-01

The use of catheter hub decontamination protocols is a common practice to reduce central line-associated bloodstream infections. However, few data exist on the most effective disinfection procedure prior to hub access accounting for human factors and time-dependent practices in real time in the clinical setting. An observational design with a multimodal intervention was used in this study in a neonatal intensive care unit. Direct observations on nurse compliance of scrub times with decontamination when accessing of venous catheter and feeding tube hubs were conducted during 3 phases: (1) baseline period prior to any interventions; (2) during an educational intervention phase; and (3) during a timer intervention period when using a timing device, either an actual timer or music button. Overall, both education and the timing device interventions increased the mean scrub time ± SD of venous catheter hubs. Mean baseline scrub times of 10 ± 5 seconds were lower compared with 23 ± 12 seconds after educational intervention (P music button use (P observed with scrub times of feeding tubes. Time-based infection control measures, such as scrubbing the hub, must be implemented with aids that qualify specific times to account for human factors, to ensure adherence to time-dependent measures aimed at decreasing nosocomial infections. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Cortical hubs form a module for multisensory integration on top of the hierarchy of cortical networks

Directory of Open Access Journals (Sweden)

Gorka Zamora-López

2010-03-01

Full Text Available Sensory stimuli entering the nervous system follow particular paths of processing, typically separated (segregated from the paths of other modal information. However, sensory perception, awareness and cognition emerge from the combination of information (integration. The corticocortical networks of cats and macaque monkeys display three prominent characteristics: (i modular organisation (facilitating the segregation, (ii abundant alternative processing paths and (iii the presence of highly connected hubs. Here, we study in detail the organisation and potential function of the cortical hubs by graph analysis and information theoretical methods. We find that the cortical hubs form a spatially delocalised, but topologically central module with the capacity to integrate multisensory information in a collaborative manner. With this, we resolve the underlying anatomical substrate that supports the simultaneous capacity of the cortex to segregate and to integrate multisensory information.

SHMF: Interest Prediction Model with Social Hub Matrix Factorization

Directory of Open Access Journals (Sweden)

Chaoyuan Cui

2017-01-01

Full Text Available With the development of social networks, microblog has become the major social communication tool. There is a lot of valuable information such as personal preference, public opinion, and marketing in microblog. Consequently, research on user interest prediction in microblog has a positive practical significance. In fact, how to extract information associated with user interest orientation from the constantly updated blog posts is not so easy. Existing prediction approaches based on probabilistic factor analysis use blog posts published by user to predict user interest. However, these methods are not very effective for the users who post less but browse more. In this paper, we propose a new prediction model, which is called SHMF, using social hub matrix factorization. SHMF constructs the interest prediction model by combining the information of blogs posts published by both user and direct neighbors in user’s social hub. Our proposed model predicts user interest by integrating user’s historical behavior and temporal factor as well as user’s friendships, thus achieving accurate forecasts of user’s future interests. The experimental results on Sina Weibo show the efficiency and effectiveness of our proposed model.

Evaluation of wind flow with a nacelle-mounted continuous-wave lidar

DEFF Research Database (Denmark)

Medley, John; Slinger, Chris; Barker, Will

IR, increasing the confidence in the ZephIR for measuring wind parameters in this configuration. SCADA data from the turbine was combined with measured wind speeds and directions to derive power curves from the mast data (hub-height) and from ZephIR data (hub-height and rotor-equivalent). The rotor...

Usability evaluation of user interface of thesis title review system

Science.gov (United States)

Tri, Y.; Erna, A.; Gellysa, U.

2018-03-01

Presentation of programs with user interface that can be accessed online through the website of course greatly provide user benefits. User can easily access the program they need. There are usability values that serve as a benchmark for the success of a user accessible program, ie efficiency, effectiveness, and convenience. These usability values also determine the development of the program for the better use. Therefore, on the review title thesis program that will be implemented in STT Dumai was measured usability evaluation. It aims to see which sides are not yet perfect and need to be improved to improve the performance and utilization of the program. Usability evaluation was measured by using smartPLS software. Database used was the result of respondent questionnaires that include questions about the experience when they used program. The result of a review of thesis title program implemented in STT Dumai has an efficiency value of 22.615, the effectiveness of 20.612, and satisfaction of 33.177.

Usability Testing for Serious Games: Making Informed Design Decisions with User Data

Directory of Open Access Journals (Sweden)

Pablo Moreno-Ger

2012-01-01

Full Text Available Usability testing is a key step in the successful design of new technologies and tools, ensuring that heterogeneous populations will be able to interact easily with innovative applications. While usability testing methods of productivity tools (e.g., text editors, spreadsheets, or management tools are varied, widely available, and valuable, analyzing the usability of games, especially educational “serious” games, presents unique usability challenges. Because games are fundamentally different than general productivity tools, “traditional” usability instruments valid for productivity applications may fall short when used for serious games. In this work we present a methodology especially designed to facilitate usability testing for serious games, taking into account the specific needs of such applications and resulting in a systematically produced list of suggested improvements from large amounts of recorded gameplay data. This methodology was applied to a case study for a medical educational game, MasterMed, intended to improve patients’ medication knowledge. We present the results from this methodology applied to MasterMed and a summary of the central lessons learned that are likely useful for researchers who aim to tune and improve their own serious games before releasing them for the general public.

Assessing inspection sensitivity as it relates to damage tolerance in composite rotor hubs

Science.gov (United States)

Roach, Dennis P.; Rackow, Kirk

2001-08-01

Increasing niche applications, growing international markets, and the emergence of advanced rotorcraft technology are expected to greatly increase the population of helicopters over the next decade. In terms of fuselage fatigue, helicopters show similar trends as fixed-wing aircraft. The highly unsteady loads experienced by rotating wings not only directly affect components in the dynamic systems but are also transferred to the fixed airframe structure. Expanded use of rotorcraft has focused attention on the use of new materials and the optimization of maintenance practices. The FAA's Airworthiness Assurance Center (AANC) at Sandia National Labs has joined with Bell Helicopter andother agencies in the rotorcraft industry to evaluate nondestructive inspection (NDI) capabilities in light of the damage tolerance of assorted rotorcraft structure components. Currently, the program's emphasis is on composite rotor hubs. The rotorcraft industry is constantly evaluating new types of lightweight composite materials that not only enhance the safety and reliability of rotor components but also improve performance and extended operating life as well. Composite rotor hubs have led to the use of bearingless rotor systems that are less complex and require less maintenance than their predecessors. The test facility described in this paper allows the structural stability and damage tolerance of composite hubs to be evaluated using realistic flight load spectrums of centrifugal force and bending loads. NDI was integrated into the life-cycle fatigue tests in order to evaluate flaw detection sensitivity simultaneously wiht residual strength and general rotor hub peformance. This paper will describe the evolving use of damage tolerance analysis (DTA) to direct and improve rotorcraft maintenance along with the related use of nondestructive inspections to manage helicopter safety. OVeralll, the data from this project will provide information to improve the producibility, inspectability

The WaterHub at Emory University: Campus Resiliency through Decentralized Reuse.

Science.gov (United States)

Allison, Daniel; Lohan, Eric; Baldwin, Tim

2018-02-01

  In the spring of 2015, Emory University in Atlanta, GA, commissioned an innovative campuswide water reclamation and reuse system known as the WaterHub®. Treating up to 400,000 gallons each day, the system can recycle the equivalent of two-thirds of the University's wastewater production and reduce the campus water footprint by up to 40 percent.One of the first district-scale water reuse systems in North America, the WaterHub mines wastewater from the campus sewer system and repurposes it for beneficial reuse on campus. In its first year of operation, the facility has treated more than 80 million gallons of campus wastewater and is expected to save millions of dollars in utility costs for the University over the next 20 years. The system represents a new age in commercial-scale water management in which onsite, urban water reclamation facilities may be a new norm.

Giant hub Src and Syk tyrosine kinase thermodynamic profiles recapitulate evolution

Science.gov (United States)

Phillips, J. C.

2017-10-01

Thermodynamic scaling theory, previously applied mainly to small proteins, here analyzes quantitative evolution of the titled functional network giant hub enzymes. The broad domain structure identified homologically is confirmed hydropathically using amino acid sequences only. The most surprising results concern the evolution of the tyrosine kinase globular surface roughness from avians to mammals, which is first order, compared to the evolution within mammals from rodents to humans, which is second order. The mystery of the unique amide terminal region of proto oncogene tyrosine protein kinase is resolved by the discovery there of a rare hydroneutral septad targeting cluster, which is paralleled by an equally rare octad catalytic cluster in tyrosine kinase in humans and a few other species (cat and dog). These results, which go far towards explaining why these proteins are among the largest giant hubs in protein interaction networks, use no adjustable parameters.

Usability Assessment of E-Café Operational Management Simulation Game

Science.gov (United States)

Chang, Chiung-sui; Huang, Ya-Ping

2013-01-01

To ensure the quality of digital simulation game, we utilized the usability evaluation heuristic in the design and development processes of e-café operational management game-based learning material for students. The application of usability evaluations during this study is described. Additionally, participant selection, data collection and…

Usability Testing: A Case Study.

Science.gov (United States)

Chisman, Janet; Walbridge, Sharon; Diller, Karen

1999-01-01

Discusses the development and results of usability testing of Washington State University's Web-based OPAC (online public access catalog); examines how easily users could navigate the catalog and whether they understood what they were seeing; and identifies problems and what action if any was taken. (LRW)

Electrical hubs: An effective way to integrate non-dispatchable renewable energy sources with minimum impact to the grid

International Nuclear Information System (INIS)

Perera, A.T.D.; Nik, Vahid M.; Mauree, Dasaraden; Scartezzini, Jean-Louis

2017-01-01

Highlights: • A novel method introduced to optimize Electrical Hubs. • Novel dispatch based on fuzzy control and finite state machines. • Evaluating sensitivity of three performance indices for system autonomy. • Multi objective optimization considering system autonomy-cost. • Electrical Hubs can cover above 60% of the demand using wind and Solar PV. - Abstract: A paradigm change in energy system design tools, energy market, and energy policy is required to attain the target levels in renewable energy integration and in minimizing pollutant emissions in power generation. Integrating non-dispatchable renewable energy sources such as solar and wind energy is vital in this context. Distributed generation has been identified as a promising method to integrate Solar PV (SPV) and wind energy into grid in recent literature. Distributed generation using grid-tied electrical hubs, which consist of Internal Combustion Generator (ICG), non-dispatchable energy sources (i.e., wind turbines and SPV panels) and energy storage for providing the electricity demand in Sri Lanka is considered in this study. A novel dispatch strategy is introduced to address the limitations in the existing methods in optimizing grid-integrated electrical hubs considering real time pricing of the electricity grid and curtailments in grid integration. Multi-objective optimization is conducted for the system design considering grid integration level and Levelized Energy Cost (LEC) as objective functions to evaluate the potential of electrical hubs to integrate SPV and wind energy. The sensitivity of grid curtailments, energy market, price of wind turbines and SPV panels on Pareto front is evaluated subsequently. Results from the Pareto analysis demonstrate the potential of electrical hubs to cover more than 60% of the annual electricity demand from SPV and wind energy considering stringent grid curtailments. Such a share from SPV and wind energy is quite significant when compared to direct grid

Concordant preferences for actual height and facial cues to height

OpenAIRE

Re, Daniel Edward; Perrett, David I.

2012-01-01

Physical height has a well-documented effect on human mate preferences. In general, both sexes prefer opposite-sex romantic relationships in which the man is taller than the woman, while individual preferences for height are affected by a person’s own height. Research in human mate choice has demonstrated that attraction to facial characteristics, such as facial adiposity, may reflect references for body characteristics. Here, we tested preferences for facial cues to height. In general, incre...

Usability Testing For Android Based Application “Jogja Smart Tourism”

Science.gov (United States)

Harwati; Djati Widodo, Imam

2017-06-01

The android based application “Jogja Smart Tourism (JST)” is designed to help everyone who visited Yogyakarta to enjoy their travel. As new application, it is need to be tested for its usability before launched. Usability testing will show how easy user interfaces are to used. The objective of this research is to demonstrate the result of usability testing for application JST based on five characteristics: learnability, effectiveness, memorability, errors, and satisfaction. About 30 respondents were involved to test the usability of this application. Learnability and effectiveness is calculated from some task that should be finished by respondents, and the rest aspects are calculated from questionnaires that should be answered after simulation. There are 14 functions bound in this usability testing. The result shows total usability level is in 81.75%. Learnability testing shows that 98.8% of respondent could finish the task successfully with 87.5% in efficiency. The memorability level of respondents is good (84.5%) where their ability to fix the errors is 71.5%. And the last for satisfaction level of application interface is 66.25%. Low level of satisfaction occurred because most of respondent felt uncomfortable with landscape interface of application because they should turn their mobile phone while using JST application and also it happened because the lack of using picture and colour inside the application. Both of these becomes important note for the improvement of further applications where the interface in a portrait version is more comfort the use and also utilization of colour and the image will be the main focus to improve customer satisfaction.

Usability Evaluation of Electronic Health Record System around Clinical Notes Usage-An Ethnographic Study.

Science.gov (United States)

Rizvi, Rubina F; Marquard, Jenna L; Hultman, Gretchen M; Adam, Terrence J; Harder, Kathleen A; Melton, Genevieve B

2017-10-01

Background A substantial gap exists between current Electronic Health Record (EHR) usability and potential optimal usability. One of the fundamental reasons for this discrepancy is poor incorporation of a User-Centered Design (UCD) approach during the Graphical User Interface (GUI) development process. Objective To evaluate usability strengths and weaknesses of two widely implemented EHR GUIs for critical clinical notes usage tasks. Methods Twelve Internal Medicine resident physicians interacting with one of the two EHR systems (System-1 at Location-A and System-2 at Location-B) were observed by two usability evaluators employing an ethnographic approach. User comments and observer findings were analyzed for two critical tasks: (1) clinical notes entry and (2) related information-seeking tasks. Data were analyzed from two standpoints: (1) usability references categorized by usability evaluators as positive, negative, or equivocal and (2) usability impact of each feature measured through a 7-point severity rating scale. Findings were also validated by user responses to a post observation questionnaire. Results For clinical notes entry, System-1 surpassed System-2 with more positive (26% vs. 12%) than negative (12% vs. 34%) usability references. Greatest impact features on EHR usability (severity score pertaining to each feature) for clinical notes entry were: autopopulation (6), screen options (5.5), communication (5), copy pasting (4.5), error prevention (4.5), edit ability (4), and dictation and transcription (3.5). Both systems performed equally well on information-seeking tasks and features with greatest impacts on EHR usability were navigation for notes (7) and others (e.g., looking for ancillary data; 5.5). Ethnographic observations were supported by follow-up questionnaire responses. Conclusion This study provides usability-specific insights to inform future, improved, EHR interface that is better aligned with UCD approach.

CER Hub: An informatics platform for conducting comparative effectiveness research using multi-institutional, heterogeneous, electronic clinical data.

Science.gov (United States)

Hazlehurst, Brian L; Kurtz, Stephen E; Masica, Andrew; Stevens, Victor J; McBurnie, Mary Ann; Puro, Jon E; Vijayadeva, Vinutha; Au, David H; Brannon, Elissa D; Sittig, Dean F

2015-10-01

Comparative effectiveness research (CER) requires the capture and analysis of data from disparate sources, often from a variety of institutions with diverse electronic health record (EHR) implementations. In this paper we describe the CER Hub, a web-based informatics platform for developing and conducting research studies that combine comprehensive electronic clinical data from multiple health care organizations. The CER Hub platform implements a data processing pipeline that employs informatics standards for data representation and web-based tools for developing study-specific data processing applications, providing standardized access to the patient-centric electronic health record (EHR) across organizations. The CER Hub is being used to conduct two CER studies utilizing data from six geographically distributed and demographically diverse health systems. These foundational studies address the effectiveness of medications for controlling asthma and the effectiveness of smoking cessation services delivered in primary care. The CER Hub includes four key capabilities: the ability to process and analyze both free-text and coded clinical data in the EHR; a data processing environment supported by distributed data and study governance processes; a clinical data-interchange format for facilitating standardized extraction of clinical data from EHRs; and a library of shareable clinical data processing applications. CER requires coordinated and scalable methods for extracting, aggregating, and analyzing complex, multi-institutional clinical data. By offering a range of informatics tools integrated into a framework for conducting studies using EHR data, the CER Hub provides a solution to the challenges of multi-institutional research using electronic medical record data. Copyright © 2015. Published by Elsevier Ireland Ltd.

Usability in the lifecycle of medical software development

Directory of Open Access Journals (Sweden)

Trauzettel Franziska

2016-09-01

Full Text Available A close cooperation with users is necessary to ensure that interactive systems are robust, easy to use and accepted. Therefore, in medical technology, standards for usability are of fundamental importance. We investigated with the presented study how the concept of usability is currently understood and implemented in medical software companies. Interviews were conducted with 21 employees of German enterprises. Furthermore we extended an already existing quantitative online survey where 53 companies (including 24 from the health industry sector participated in. Results show that the importance of usability is recognized by most of the respondents. Moreover, a wide variety of methods and approaches is known and implemented for exploring user needs and evaluating system prototypes. However, it was observed that human-centered design activities mainly focus on functionality, risk prevention and accessibility. Hedonic user needs and subjective perceptions (“user experience” still play a minor role. Based on the results, practical requirements are derived and a “best case” for methodological approach is introduced.

Designing Telemedicine Systems for Geriatric Patients: A Review of the Usability Studies.

Science.gov (United States)

Narasimha, Shraddhaa; Madathil, Kapil Chalil; Agnisarman, Sruthy; Rogers, Hunter; Welch, Brandon; Ashok, Aparna; Nair, Aswathi; McElligott, James

2017-06-01

One area where telemedicine may prove to be highly effective is in providing medical care to the geriatric population, an age group predicted to account for 20% of the population in the near future. However, even though telemedicine has certain advantages, the usability of these systems with this population merits investigation. This article reviews the literature published from 2000 to 2016 with the goal of analyzing the characteristics of usability-related studies conducted using geriatric participants and the subsequent usability challenges identified. Articles were found using Web of Knowledge and PubMed citation indexing portals using the keywords (1) Telemedicine* AND Geriatrics* (2) Telemedicine* AND Usability* (3) Telemedicine* AND Usability* AND Older Adults*. A total of 297 articles were obtained from the initial search. After further detailed screening, 16 articles were selected for review based on the inclusion criteria. Of these, 60% of the studies focused on the overall usability of telemedicine systems; 6.25% focused on the usability of a telepresence robot; 12.5% compared a face-to-face medical consultation with the use of telemedicine systems, and 25% focused on the study of other aspects of telemedicine in addition to its usability. Findings reported in the studies included high patient satisfaction with telemedicine in 31.25%, whereas another 31.25% indicated a high acceptance of this method of medical consultation. Care coordination in 6.25% of the studies; confidence in telemedicine in 6.25%; trust, privacy, and reliability in 6.25%; and increased convenience when compared to personal visits in 18.75% were also reported. This review suggests limited research providing scientifically valid and reproducible usability evaluation at various stages of telemedicine system development. Telemedicine system designers need to consider the age-related issues in cognition, perception, and behavior of geriatric patients while designing telemedicine

Finding online health-related information: usability issues of health portals.

Science.gov (United States)

Gurel Koybasi, Nergis A; Cagiltay, Kursat

2012-01-01

As Internet and computers become widespread, health portals offering online health-related information become more popular. The most important point for health portals is presenting reliable and valid information. Besides, portal needs to be usable to be able to serve information to users effectively. This study aims to determine usability issues emerging when health-related information is searched on a health portal. User-based usability tests are conducted and eye movement analyses are used in addition to traditional performance measures. Results revealed that users prefer systematic, simple and consistent designs offering interactive tools. Moreover, content and partitions needs to be shaped according to the medical knowledge of target users.

Changed hub and corresponding functional connectivity of subgenual anterior cingulate cortex in major depressive disorder

Directory of Open Access Journals (Sweden)

Huawang Wu

2016-12-01

Full Text Available Major depressive disorder (MDD is one of the most prevalent mental disorders. In the brain, the hubs of the brain network play a key role in integrating and transferring information between different functional modules. However, whether the changed pattern in functional network hubs contributes to the onset of MDD remains unclear. Using resting-state functional magnetic resonance imaging and graph theory methods, we investigated whether alterations of hubs can be detected in MDD. First, we constructed the whole-brain voxel-wise functional networks and calculated a functional connectivity strength (FCS map in each subject in 34 MDD patients and 34 gender-, age-, and education level-matched healthy controls (HC. Next, the two-sample t-test was applied to compare the FCS maps between HC and MDD patients and identified significant decreased FCS in subgenual anterior cingulate cortex (sgACC in MDD patients. Subsequent functional connectivity analyses of sgACC showed disruptions in functional connectivity with posterior insula, middle and inferior temporal gyrus, lingual gyrus, and cerebellum in MDD patients. Furthermore, the changed FCS of sgACC and functional connections to sgACC were significantly correlated with the Hamilton Depression Rating Scale (HDRS scores in MDD patients. The results of the present study revealed the abnormal hub of sgACC and its corresponding disrupted frontal-limbic-visual cognitive-cerebellum functional networks in MDD. These findings may provide a new insight for the diagnosis and treatment of MDD.

Using the CER Hub to ensure data quality in a multi-institution smoking cessation study.

Science.gov (United States)

Walker, Kari L; Kirillova, Olga; Gillespie, Suzanne E; Hsiao, David; Pishchalenko, Valentyna; Pai, Akshatha Kalsanka; Puro, Jon E; Plumley, Robert; Kudyakov, Rustam; Hu, Weiming; Allisany, Art; McBurnie, MaryAnn; Kurtz, Stephen E; Hazlehurst, Brian L

2014-01-01

Comparative effectiveness research (CER) studies involving multiple institutions with diverse electronic health records (EHRs) depend on high quality data. To ensure uniformity of data derived from different EHR systems and implementations, the CER Hub informatics platform developed a quality assurance (QA) process using tools and data formats available through the CER Hub. The QA process, implemented here in a study of smoking cessation services in primary care, used the 'emrAdapter' tool programmed with a set of quality checks to query large samples of primary care encounter records extracted in accord with the CER Hub common data framework. The tool, deployed to each study site, generated error reports indicating data problems to be fixed locally and aggregate data sharable with the central site for quality review. Across the CER Hub network of six health systems, data completeness and correctness issues were prevalent in the first iteration and were considerably improved after three iterations of the QA process. A common issue encountered was incomplete mapping of local EHR data values to those defined by the common data framework. A highly automated and distributed QA process helped to ensure the correctness and completeness of patient care data extracted from EHRs for a multi-institution CER study in smoking cessation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

New Options for Usability Testing Projects in Business Communication Courses

Science.gov (United States)

Jameson, Daphne A.

2013-01-01

The increasing availability of recording technologies makes it easier to include usability testing projects in business communication courses. Usability testing is a method of discovering whether people can navigate, read, and understand a print or electronic communication well enough to achieve a particular purpose in a reasonable time frame.…

Earning the Stamp of Approval: How To Achieve Optimal Usability.

Science.gov (United States)

Makar, Susan

2003-01-01

Describes the redesign of the Web site at the virtual library of the NIST (National Institute of Standards and Technology). Discusses usability problems with the original site, including navigation difficulties; focus groups to determine user needs; usability testing for the new Web site; and the importance of customer input. (LRW)

Usability evaluation of mobile applications; where do we stand?

Science.gov (United States)

Zahra, Fatima; Hussain, Azham; Mohd, Haslina

2017-10-01

The range and availability of mobile applications is expanding rapidly. With the increased processing power available on portable devices, developers are increasing the range of services by embracing smartphones in their extensive and diverse practices. While usability testing and evaluations of mobile applications have not yet touched the accuracy level of other web based applications. The existing usability models do not adequately capture the complexities of interacting with applications on a mobile platform. Therefore, this study aims to presents review on existing usability models for mobile applications. These models are in their infancy but with time and more research they may eventually be adopted. Moreover, different categories of mobile apps (medical, entertainment, education) possess different functional and non-functional requirements thus customized models are required for diverse mobile applications.

Use Case Evaluation (UCE): A Method for Early Usability Evaluation in Software Development

DEFF Research Database (Denmark)

Stage, Jan; Høegh, Rune Thaarup; Hornbæk, K.

2007-01-01

t is often argued that usability problems should be identified as early as possible during software development, but many usability evaluation methods do not fit well in early development activities. We propose a method for usability evaluation of use cases, a widely used representation of design...... ideas produced early in software development processes. The method proceeds by systematic inspection of use cases with reference to a set of guidelines for usable design. To validate the method, four evaluators inspected a set of use cases for a health care application....

Usability study of a novel, self-lighted, disposable speculum: military applications.

Science.gov (United States)

Jones, Christina L; Gruber, Daniel D; Warner, William; Buller, Jerome L

2013-04-01

Data collected from a postutilization questionnaire were used to evaluate the usability of the OfficeSPEC disposable vaginal speculum, specifically the effectiveness, efficiency, and acceptability, in clinical, hospital, and austere environments. Usability data analysis showed the OfficeSPEC speculum had an effectiveness rating of 4.6/5, efficiency rating of 4.5/5, and acceptability rating of 4.6/5; overall usability in deployed environments was favorable. The overall rankings were 3.4 for plastic, 4.2 for metal (p disposable speculum as a reasonable alternative with yearly cost of $129,200, compared to traditional metal ($209,100) and plastic ($319,175). By evaluating the OfficeSPEC speculum within a usability framework, it proved to be practical, viable alternative in all environments, particularly in the forward deployed environment. Reprint & Copyright © 2013 Association of Military Surgeons of the U.S.

Involving the users remotely: an exploratory study using asynchronous usability testing

Directory of Open Access Journals (Sweden)

Beth Filar Williams

2015-02-01

Full Text Available Open Educational Resources (OER are increasingly used in the higher education landscape as a solution for a variety of copyright, publishing and cost-prohibiting issues. While OERs are becoming more common, reports of usability tests that evaluate how well learners can use them to accomplish their learning tasks have lagged behind. Because both the researchers and the learners in this study use resources and tools remotely, asynchronous usability testing of a prototype OER and MOOC online guide was conducted with an exploratory group of users to determine the guide’s ease of use for two distinct groups of users: Educators and Learners. In this article, we share the background and context of this usability project, suggest best methods for asynchronous remote usability testing, and share challenges and insights of the process and results of the testing

Love and fear of heights: the pathophysiology and psychology of height imbalance.

Science.gov (United States)

Salassa, John R; Zapala, David A

2009-01-01

Individual psychological responses to heights vary on a continuum from acrophobia to height intolerance, height tolerance, and height enjoyment. This paper reviews the English literature and summarizes the physiologic and psychological factors that generate different responses to heights while standing still in a static or motionless environment. Perceptual cues to height arise from vision. Normal postural sway of 2 cm for peripheral objects within 3 m increases as eye-object distance increases. Postural sway >10 cm can result in a fall. A minimum of 20 minutes of peripheral retinal arc is required to detect motion. Trigonometry dictates that a 20-minute peripheral retinal arch can no longer be achieved in a standing position at an eye-object distance of >20 m. At this distance, visual cues conflict with somatosensory and vestibular inputs, resulting in variable degrees of imbalance. Co-occurring deficits in the visual, vestibular, and somatosensory systems can significantly increase height imbalance. An individual's psychological makeup, influenced by learned and genetic factors, can influence reactions to height imbalance. Enhancing peripheral vision and vestibular, proprioceptive, and haptic functions may improve height imbalance. Psychotherapy may improve the troubling subjective sensations to heights.

A Novel Multifactor Authentication System Ensuring Usability and Security

OpenAIRE

Mathew, Gloriya; Thomas, Shiney

2013-01-01

User authentication is one of the most important part of information security. Computer security most commonly depends on passwords to authenticate human users. Password authentication systems will be either been usable but not secure, or secure but not usable. While there are different types of authentication systems available alphanumeric password is the most commonly used authentication mechanism. But this method has significant drawbacks. An alternative solution to the text based authenti...

From hub proteins to hub modules: the relationship between essentiality and centrality in the yeast interactome at different scales of organization.

Directory of Open Access Journals (Sweden)

Jimin Song

Full Text Available Numerous studies have suggested that hub proteins in the S. cerevisiae physical interaction network are more likely to be essential than other proteins. The proposed reasons underlying this observed relationship between topology and functioning have been subject to some controversy, with recent work suggesting that it arises due to the participation of hub proteins in essential complexes and processes. However, do these essential modules themselves have distinct network characteristics, and how do their essential proteins differ in their topological properties from their non-essential proteins? We aimed to advance our understanding of protein essentiality by analyzing proteins, complexes and processes within their broader functional context and by considering physical interactions both within and across complexes and biological processes. In agreement with the view that essentiality is a modular property, we found that the number of intracomplex or intraprocess interactions that a protein has is a better indicator of its essentiality than its overall number of interactions. Moreover, we found that within an essential complex, its essential proteins have on average more interactions, especially intracomplex interactions, than its non-essential proteins. Finally, we built a module-level interaction network and found that essential complexes and processes tend to have higher interaction degrees in this network than non-essential complexes and processes; that is, they exhibit a larger amount of functional cross-talk than their non-essential counterparts.

Beyond the Usability Lab Conducting Large-scale Online User Experience Studies

CERN Document Server

Albert, William; Tullis, Thomas

2010-01-01

Usability testing and user experience research typically take place in a controlled lab with small groups. While this type of testing is essential to user experience design, more companies are also looking to test large sample sizes to be able compare data according to specific user populations and see how their experiences differ across user groups. But few usability professionals have experience in setting up these studies, analyzing the data, and presenting it in effective ways.  Online usability testing offers the solution by allowing testers to elicit feedback simultaneously from 1,0

National questionnaire study on clinical ICT systems proofs: physicians suffer from poor usability.

Science.gov (United States)

Viitanen, Johanna; Hyppönen, Hannele; Lääveri, Tinja; Vänskä, Jukka; Reponen, Jarmo; Winblad, Ilkka

2011-10-01

In the health informatics field, usability studies typically focus on evaluating a single information system and involve a rather small group of end-users. However, little is known about the usability of clinical information and communication technology (ICT) environment in which healthcare professionals work daily. This paper aims at contributing to usability research and user-oriented development of healthcare technologies with three objectives: inform researchers and practitioners about the current state of usability of clinical ICT systems, increase the understanding of usability aspects specific for clinical context, and encourage a more holistic approach on studying usability issues in health informatics field. A national web questionnaire study was conducted in Finland in spring 2010 with 3929 physicians actively working in patient care. For the purposes of the study, we described three dimensions of clinical ICT system usability that reflect the physicians' viewpoint on system usage: (1) compatibility between clinical ICT systems and physicians' tasks, (2) ICT support for information exchange, communication and collaboration in clinical work, and (3) interoperability and reliability. The dimensions derive from the definitions of usability and clinical context of use analysis, and reflect the ability of ICT systems to have a positive impact on patient care by supporting physicians in achieving their goals with a pleasant user experience. The research data incorporated 32 statements with a five-point Likert-scale on physicians' experiences on usability of their currently used ICT systems and a summative question about school grade given to electronic health record (EHR) systems. Physicians' estimates of their EHR systems were very critical. With the rating scale from 4 or fail to 10 or excellent, the average of the grades varied from 6.1 to 8.4 dependent on the kind of facility the physician is working. Questionnaire results indicated several usability

Are Language Learning Websites Special? Towards a Research Agenda for Discipline-Specific Usability

Science.gov (United States)

Shield, Lesley; Kukulska-Hulme, Agnes

2006-01-01

With the intention of defining an initial research agenda for discipline-specific factors in the usability of e-learning websites, this article focuses on the example of foreign language learning. First, general notions and concepts of usability are analyzed, and the term "pedagogical usability" is proposed as a means of focusing on the close…

The relationship between perceived usability of a beautiful interface and of an ugly interface

OpenAIRE

Mohammed, Naitullah; Syed.Mohammed, Mahamood Ur Rahman

2012-01-01

The relationship between the perceived usability of a beautiful interface and of an ugly interface is analyzed in this study. This study correlates the visual aesthetics of the website with perceived usability. This research is performed to know the significance of visual aesthetics on perceived usability. A website is designed with two interfaces. One interface is designed by following design guidelines with respect to usability and the other interface is designed without following guideline...