WorldWideScience

Sample records for high-capacity chitosan-based chelating

  1. Chitosan-based nanocomposites

    CSIR Research Space (South Africa)

    Kesavan Pillai, Sreejarani

    2012-08-01

    Full Text Available , and hygiene devices. They thus represent a strong and emerging answer for improved and eco-friendly materials. This chapter reviews the recent developments in the area of chitosan-based nanocomposites, with a special emphasis on clay-containing nanocomposites...-sized mineral fillers like silica, talc, and clay are added to reduce the cost and improve chitosan’s performance in some way. However, the mechanical properties such as elongation at break and tensile strength of these composites decrease with the incorporation...

  2. Preparation of High-capacity IDA Chelating Resin and Its Adsorption Properties%高容量亚胺基二乙酸型螯合树脂的制备及吸附性能

    Institute of Scientific and Technical Information of China (English)

    董佳斌; 吴建波; 杨静; 宋玮; 戴小军; 冶正得; 龚波林

    2013-01-01

    A new high-capacity iminodiacetic acid (IDA) chelating resin was synthesized via surface-initiated atom transfer radical polymerization ( SI-ATRP) method. Glycidyl methacrylate ( GMA) was grafted onto the surface of the chloromethyl polystyrene resin by SI-ATRP using the organic metal compound formed in the Cu-Br/2,2'-bipyridine(Bpy) system as catalyst at room temperature. The IDA chelating resin was synthesized by grafting IDA on the surface of polyglycidyl methacrylate ( PGM A) modified polystyrene resin. The chelating resin was characterized by means of elementary analysis, and evaluated in details to determine its adsorption properties and parameters of kinetics and the thermodynamics. The amount of IDA on the surface of polystyrene resin was calculated to be 8. 15 mg/m . Adsorption capacity of copper( II) increased with increasing initial metal ion concentration and temperature, and its highest adsorption capacity was 1339. 66 mg/g at pH = 2. 2. The experimental results showed that the equilibrium adsorption data fitted well to both Langmuir and Freundlich isotherms. The thermodynamic equilibrium functions were also determined. △G<0, △H=270. 60 kJ/mol, △S>0, so the adsorption was spontaneous, endothermic and entropy increasing. The kinetic experimental data were correlated with second-order kinetic model.%以甲基丙烯酸缩水甘油酯(GMA)为单体,氯甲基化的交联聚苯乙烯树脂(CMCPS)为大分子引发剂,CuBr/2,2’-联吡啶(Bpy)为催化剂,采用表面引发原子转移自由基聚合(SI-ATRP)技术,使甲基丙烯酸缩水甘油酯聚合在CMCPS树脂表面,制得了环氧化聚合物.将该聚合物与亚胺基二乙酸(IDA)反应,制备了高容量亚胺基二乙酸型螯合树脂(IDA-PGMA-CMCPS),用元素分析对其进行了表征.考察了螯合树脂对Cu2+的吸附性能及动力学和热力学参数.该螯合树脂表面IDA接枝密度达8.15 mg/m2.研究结果表明,树脂对Cu2+的吸附量随离子浓度和温度的

  3. Functional properties of chitosan-based films.

    Science.gov (United States)

    Leceta, I; Guerrero, P; de la Caba, K

    2013-03-01

    Chitosan-based films plasticized with glycerol were prepared by casting with the aim to obtain environmentally friendly materials for packaging applications. Different contents of glycerol were incorporated into chitosan solutions to improve mechanical properties and all films obtained were flexible and transparent. It was observed that the transparency and good behaviour of the films against UV radiation were not affected by chitosan molecular weight or glycerol content. Moreover, chitosan-based films exhibited excellent barrier properties against water vapour and oxygen, even with the addition of glycerol. The effect of the plasticizer on the properties has been explained using Fourier transform infrared (FTIR) spectroscopic analysis. The changes observed in the intensity of the bands showed that glycerol interacts with chitosan, which could be confirmed by total soluble matter (TSM). Copyright © 2012 Elsevier Ltd. All rights reserved.

  4. Future High Capacity Backbone Networks

    DEFF Research Database (Denmark)

    Wang, Jiayuan

    This thesis - Future High Capacity Backbone Networks - deals with the energy efficiency problems associated with the development of future optical networks. In the first half of the thesis, novel approaches for using multiple/single alternative energy sources for improving energy efficiency...... the context of the integrated control plane structure. Results show improvements of energy efficiency over three types of traffic, while still keeping acceptable QoS levels for high priority traffic....

  5. Chitosan-based formulations of drugs, imaging agents and biotherapeutics

    NARCIS (Netherlands)

    Amidi, M.; Hennink, W.E.

    2010-01-01

    This preface is part of the Advanced Drug Delivery Reviews theme issue on “Chitosan-Based Formulations of Drugs, Imaging Agents and Biotherapeutics”. This special Advanced Drug Delivery Reviews issue summarizes recent progress and different applications of chitosanbased formulations.

  6. Chitosan-based formulations of drugs, imaging agents and biotherapeutics

    NARCIS (Netherlands)

    Amidi, M.; Hennink, W.E.

    This preface is part of the Advanced Drug Delivery Reviews theme issue on “Chitosan-Based Formulations of Drugs, Imaging Agents and Biotherapeutics”. This special Advanced Drug Delivery Reviews issue summarizes recent progress and different applications of chitosanbased formulations.

  7. Chitosan-based delivery systems for protein therapeutics and antigens

    NARCIS (Netherlands)

    Amidi, M.; Mastrobattista, E.; Jiskoot, W.; Hennink, W.E.

    2010-01-01

    Therapeutic peptides/proteins and protein-based antigens are chemically and structurally labile compounds, which are almost exclusively administered by parenteral injections. Recently, non-invasive mucosal routes have attracted interest for administration of these biotherapeutics. Chitosan-based del

  8. Chitosan-based polyherbal toothpaste: As novel oral hygiene product

    Directory of Open Access Journals (Sweden)

    Mohire Nitin

    2010-01-01

    Full Text Available Objective: The objective of the present work was to develop chitosan-based polyherbal toothpaste and evaluate its plaque-reducing potential and efficacy in reduction of dental pathogens. Materials and Methods: Antimicrobial activity of herbal extracts against dental pathogens were performed by using disk diffusion method. The pharmaceutical evaluation of toothpaste was carried out as per the US Government Tooth Paste Specifications. A 4-week clinical study was conducted in patients with oro-dental problems to evaluate the plaque removing efficacy of chitosan-based polyherbal toothpaste with commercially available chlorhexidine gluconate (0.2% w/v mouthwash as positive control. Total microbial count was carried out to determine the percentage decrease in the oral bacterial count over the period of treatment. Result: Herbal extracts were found to possess satisfactory antimicrobial activity against most of the dental pathogens. Chitosan-containing polyherbal toothpaste significantly reduces the plaque index by 70.47% and bacterial count by 85.29%, and thus fulfills the majority of esthetic and medicinal requirements of oral hygiene products. Conclusion: Chitosan-based polyherbal toothpaste proves itself as a promising novel oral hygiene product as compared with currently available oral hygiene products. A further study to confirm the exact mechanism and active constituents behind antiplaque and antimicrobial activity of chitosan-based polyherbal toothpaste and its efficacy in large number of patient population is on high demand.

  9. Chitosan-Based Multifunctional Platforms for Local Delivery of Therapeutics.

    Science.gov (United States)

    Hong, Seong-Chul; Yoo, Seung-Yup; Kim, Hyeongmin; Lee, Jaehwi

    2017-03-01

    Chitosan has been widely used as a key biomaterial for the development of drug delivery systems intended to be administered via oral and parenteral routes. In particular, chitosan-based microparticles are the most frequently employed delivery system, along with specialized systems such as hydrogels, nanoparticles and thin films. Based on the progress made in chitosan-based drug delivery systems, the usefulness of chitosan has further expanded to anti-cancer chemoembolization, tissue engineering, and stem cell research. For instance, chitosan has been used to develop embolic materials designed to efficiently occlude the blood vessels by which the oxygen and nutrients are supplied. Indeed, it has been reported to be a promising embolic material. For better anti-cancer effect, embolic materials that can locally release anti-cancer drugs were proposed. In addition, a complex of radioactive materials and chitosan to be locally injected into the liver has been investigated as an efficient therapeutic tool for hepatocellular carcinoma. In line with this, a number of attempts have been explored to use chitosan-based carriers for the delivery of various agents, especially to the site of interest. Thus, in this work, studies where chitosan-based drug delivery systems have successfully been used for local delivery will be presented along with future perspectives.

  10. Chitosan-Based Multifunctional Platforms for Local Delivery of Therapeutics

    Directory of Open Access Journals (Sweden)

    Seong-Chul Hong

    2017-03-01

    Full Text Available Chitosan has been widely used as a key biomaterial for the development of drug delivery systems intended to be administered via oral and parenteral routes. In particular, chitosan-based microparticles are the most frequently employed delivery system, along with specialized systems such as hydrogels, nanoparticles and thin films. Based on the progress made in chitosan-based drug delivery systems, the usefulness of chitosan has further expanded to anti-cancer chemoembolization, tissue engineering, and stem cell research. For instance, chitosan has been used to develop embolic materials designed to efficiently occlude the blood vessels by which the oxygen and nutrients are supplied. Indeed, it has been reported to be a promising embolic material. For better anti-cancer effect, embolic materials that can locally release anti-cancer drugs were proposed. In addition, a complex of radioactive materials and chitosan to be locally injected into the liver has been investigated as an efficient therapeutic tool for hepatocellular carcinoma. In line with this, a number of attempts have been explored to use chitosan-based carriers for the delivery of various agents, especially to the site of interest. Thus, in this work, studies where chitosan-based drug delivery systems have successfully been used for local delivery will be presented along with future perspectives.

  11. Chitosan-based nanocoatings for hypothermic storage of living cells.

    Science.gov (United States)

    Bulwan, Maria; Antosiak-Iwańska, Magdalena; Godlewska, Ewa; Granicka, Ludomira; Zapotoczny, Szczepan; Nowakowska, Maria

    2013-11-01

    The formation of ultrathin chitosan-based nanocoating on HL-60 model cells and their protective function in hypothermic storage are presented. HL-60 cells are encapsulated in ultrathin shells by adsorbing cationic and anionic chitosan derivatives in a stepwise, layer-by-layer, procedure carried out in an aqueous medium under mild conditions. The chitosan-based films are also deposited on model lipid bilayer and the interactions are studied using ellipsometry and atomic force microscopy. The cells covered with the chitosan-based films and stored at 4 °C for 24 h express viability comparable to that of the control sample incubated at 37 °C, while the unprotected cells stored under the same conditions do not show viability. It is shown that the chitosan-based shell protects HL-60 cells against damaging effect of hypothermic storage. Such nanocoatings provide protection, mechanical stability, and support the cell membrane, while ensuring penetration of small molecules such as nutrients/gases what is essential for cell viability.

  12. Chitosan-based membrane chromatography for protein adsorption and separation.

    Science.gov (United States)

    Liu, Yezhuo; Feng, Zhicheng; Shao, Zhengzhong; Chen, Xin

    2012-08-01

    A chitosan-based membrane chromatography was set up by using natural chitosan/carboxymethylchitosan (CS/CMCS) blend membrane as the matrix. The dynamic adsorption property for protein (lysozyme as model protein) was detailed discussed with the change in pore size of the membrane, the flow rate and the initial concentration of the feed solution, and the layer of membrane in membrane stack. The best dynamic adsorption capacity of lysozyme on the CS/CMCS membrane chromatography was found to be 15.3mg/mL under the optimal flow conditions. Moreover, the CS/CMCS membrane chromatography exhibited good repeatability and reusability with the desorption efficiency of ~90%. As an application, lysozyme and ovalbumin were successfully separated from their binary mixture through the CS/CMCS membrane chromatography. This implies that such a natural chitosan-based membrane chromatography may have great potential on the bioseparation field in the future.

  13. Preparations, Characterizations and Applications of Chitosan-based Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Chitosan is a natural polysaccharide prepared by the N-deacetylation of chitin. In this paper we have reviewed the methods of preparation of chitosan-based nanoparticles and their pharmaceutical applications. There are five methods of their preparations: emulsion cross-linking, emulsion-droplet coalescence, ionic gelation, reverse micellar method and chemically modified chitosan method. Chitosan nanoparticles are used as carriers for low molecular weight drug, vaccines and DNA. Releasing characteristics, biodistribution and applications are also summarized.

  14. Preparation and characterization of crosslinked chitosan-based nanofibers

    Institute of Scientific and Technical Information of China (English)

    Ying Shan Zhou; Dong Zhi Yang; Jun Nie

    2007-01-01

    Crosslinked chitosan-based nanofibers were successfully prepared via electrospinning technique with heat mediated chemical crosslinking followed. The structure, morphology and mechanical property of nanofibers were characterized by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), Instron machine, respectively. The results showed that, nanofibers exhibited a smooth surface and regular morphology, and tensile strength of nanofibers improved with increasing of triethylene glycol dimethacrylate (TEGDMA) content.

  15. Preparations, characterizations and applications of chitosan-based nanoparticles

    Science.gov (United States)

    Liu, Chenguang; Tan, Yulong; Liu, Chengsheng; Chen, Xiguang; Yu, Lejun

    2007-07-01

    Chitosan is a natural polysaccharide prepared by the N-deacetylation of chitin. In this paper we have reviewed the methods of preparation of chitosan-based nanoparticles and their pharmaceutical applications. There are five methods of their preparations: emulsion cross-linking, emulsion-droplet coalescence, ionic gelation, reverse micellar method and chemically modified chitosan method. Chitosan nanoparticles are used as carriers for low molecular weight drug, vaccines and DNA. Releasing characteristics, biodistribution and applications are also summarized.

  16. High capacity optical links for datacentre connectivity

    DEFF Research Database (Denmark)

    Tafur Monroy, Idelfonso; Usuga, Mario; Vegas Olmos, Juan José

    There is a timely and growing demand for high capacity optical data transport solutions to provide connectivity inside data centres and between data centres located at different geographical locations. The requirements for reach are in the order of 2 km for intra-datacentre and up to 100 km for i...

  17. Degradation of chitosan-based materials after different sterilization treatments

    Science.gov (United States)

    San Juan, A.; Montembault, A.; Gillet, D.; Say, J. P.; Rouif, S.; Bouet, T.; Royaud, I.; David, L.

    2012-02-01

    Biopolymers have received in recent years an increasing interest for their potential applications in the field of biomedical engineering. Among the natural polymers that have been experimented, chitosan is probably the most promising in view of its exceptional biological properties. Several techniques may be employed to sterilize chitosan-based materials. The aim of our study was to compare the effect of common sterilization treatments on the degradation of chitosan-based materials in various physical states: solutions, hydrogels and solid flakes. Four sterilization methods were compared: gamma irradiation, beta irradiation, exposure to ethylene oxide and saturated water steam sterilization (autoclaving). Exposure to gamma or beta irradiation was shown to induce an important degradation of chitosan, regardless of its physical state. The chemical structure of chitosan flakes was preserved after ethylene oxide sterilization, but this technique has a limited use for materials in the dry state. Saturated water steam sterilization of chitosan solutions led to an important depolymerization. Nevertheless, steam sterilization of chitosan flakes bagged or dispersed in water was found to preserve better the molecular weight of the polymer. Hence, the sterilization of chitosan flakes dispersed in water would represent an alternative step for the preparation of sterilized chitosan solutions. Alternatively, autoclaving chitosan physical hydrogels did not significantly modify the macromolecular structure of the polymer. Thus, this method is one of the most convenient procedures for the sterilization of physical chitosan hydrogels after their preparation.

  18. Preparation and Evaluation of Inhalable Itraconazole Chitosan Based Polymeric Micelles

    Directory of Open Access Journals (Sweden)

    Esmaeil Moazeni

    2012-12-01

    Full Text Available Background: This study evaluated the potential of chitosan based polymeric micelles as a nanocarrier system for pulmonary delivery of itraconazole (ITRA.Methods: Hydrophobically modified chitosan were synthesized by conjugation of stearic acid to the hydrophilic depolymerized chitosan. FTIR and 1HNMR were used to prove the chemical structure and physical properties of the depolymerized and the stearic acid grafted chitosan. ITRA was entrapped into the micelles and physicochemical properties of the micelles were investigated. Fluorescence spectroscopy, dynamic laser light scattering andtransmission electron microscopy were used to characterize the physicochemical properties of the prepared micelles. The in vitro pulmonary profile of polymeric micelles was studied by an air-jet nebulizer connected to a twin stage impinger.Results: The polymeric micelles prepared in this study could entrap up to 43.2±2.27 μg of ITRA per milliliter. All micelles showed mean diameter between 120–200 nm. The critical micelle concentration of the stearic acid grafted chitosan was found to be 1.58×10-2 mg/ml. The nebulization efficiency was up to 89% and the fine particle fraction (FPF varied from 38% to 47%. The micelles had enough stability to remain encapsulation of the drug during nebulization process.Conclusions: In vitro data showed that stearic acid grafted chitosan based polymeric micelles has a potential to be used as nanocarriers for delivery of itraconazole through inhalation.

  19. Antimicrobial Chitosan based formulations with impact on different biomedical applications.

    Science.gov (United States)

    Radulescu, Marius; Ficai, Denisa; Oprea, Ovidiu; Ficai, Anton; Andronescu, Ecaterina; Holban, Alina M

    2015-01-01

    Owing to its physico-chemical characteristics, the biodegradable and biocompatible polymer derived from crustacean shells, Chitosan is one of the preferred candidates for green biomedical applications and also for several industries. Its solubility in acid solutions and ability to form complexes with anionic macromolecules to yield nanoparticles, microparticles and hydrogels, as well as the ability of chitosan based nanocomposites to remain stable at physiological pH recommend this polymer for the development of efficient drug delivery systems. This paper reviews the main utilities of chitosan as a drug delivery component and describes the most recent technologies which utilize this polymer for developing nanostructured systems with antimicrobial effect, offering a perspective of using these findings in new, ecological biomedical applications.

  20. A high capacity 3D steganography algorithm.

    Science.gov (United States)

    Chao, Min-Wen; Lin, Chao-hung; Yu, Cheng-Wei; Lee, Tong-Yee

    2009-01-01

    In this paper, we present a very high-capacity and low-distortion 3D steganography scheme. Our steganography approach is based on a novel multilayered embedding scheme to hide secret messages in the vertices of 3D polygon models. Experimental results show that the cover model distortion is very small as the number of hiding layers ranges from 7 to 13 layers. To the best of our knowledge, this novel approach can provide much higher hiding capacity than other state-of-the-art approaches, while obeying the low distortion and security basic requirements for steganography on 3D models.

  1. High Capacity Radio over Fiber Transmission Links

    DEFF Research Database (Denmark)

    Caballero Jambrina, Antonio

    . This achievement has satisfied the requirements on transmission robustness and high capacity of next generation hybrid optical fibre-wireless networks. One important contribution of this thesis is the novel concept of photonic downconversion with free-running pulsed laser source for phase modulated Radio...... confirmed that this configuration provides high linear end-to-end transmission links and is capable of transparent transport of high spectral efficient modulation formats. Furthermore, this thesis introduces a novel approach for the generation and detection of high speed wireless signals in mm...... of the writing of this thesis. In conclusion, the results presented in this thesis demonstrate the feasibility of photonic technologies for the generation, distribution and detection of high speed wireless signals. Furthermore, it opens the prospects for next generation hybrid wireless-wired access networks...

  2. Functional chitosan-based grapefruit seed extract composite films for applications in food packaging technology

    Energy Technology Data Exchange (ETDEWEB)

    Tan, Y.M. [Department of Mechanical Engineering, National University of Singapore (Singapore); Lim, S.H.; Tay, B.Y. [Forming Technology Group, Singapore Institute of Manufacturing Technology (Singapore); Lee, M.W. [Food Innovation and Resource Centre, Singapore Polytechnic (Singapore); Thian, E.S., E-mail: mpetes@nus.edu.sg [Department of Mechanical Engineering, National University of Singapore (Singapore)

    2015-09-15

    Highlights: • Chitosan-based grapefruit seed extract (GFSE) films were solution casted. • GFSE was uniformly dispersed within all chitosan film matrices. • All chitosan-based composite films showed remarkable transparency. • Increasing amounts of GFSE incorporated increased the elongation at break of films. • Chitosan-based GFSE composite films inhibited the proliferation of fungal growth. - Abstract: Chitosan-based composite films with different amounts of grapefruit seed extract (GFSE) (0.5, 1.0 and 1.5% v/v) were fabricated via solution casting technique. Experimental results showed that GFSE was uniformly dispersed within all chitosan film matrices. The presence of GFSE made the films more amorphous and tensile strength decreased, while elongation at break values increased as GFSE content increased. Results from the measurement of light transmission revealed that increasing amounts of GFSE (from 0.5 to 1.5% v/v) did not affect transparency of the films. Furthermore, packaging of bread samples with chitosan-based GFSE composite films inhibited the proliferation of fungal growth as compared to control samples. Hence, chitosan-based GFSE composite films have the potential to be a useful material in the area of food technology.

  3. Controlling chitosan-based encapsulation for protein and vaccine delivery

    Science.gov (United States)

    Koppolu, Bhanu prasanth; Smith, Sean G.; Ravindranathan, Sruthi; Jayanthi, Srinivas; Kumar, Thallapuranam K.S.; Zaharoff, David A.

    2014-01-01

    Chitosan-based nano/microencapsulation is under increasing investigation for the delivery of drugs, biologics and vaccines. Despite widespread interest, the literature lacks a defined methodology to control chitosan particle size and drug/protein release kinetics. In this study, the effects of precipitation-coacervation formulation parameters on chitosan particle size, protein encapsulation efficiency and protein release were investigated. Chitosan particle sizes, which ranged from 300 nm to 3 μm, were influenced by chitosan concentration, chitosan molecular weight and addition rate of precipitant salt. The composition of precipitant salt played a significant role in particle formation with upper Hofmeister series salts containing strongly hydrated anions yielding particles with a low polydispersity index (PDI) while weaker anions resulted in aggregated particles with high PDIs. Sonication power had minimal effect on mean particle size, however, it significantly reduced polydispersity. Protein loading efficiencies in chitosan nano/microparticles, which ranged from 14.3% to 99.2%, was inversely related to the hydration strength of precipitant salts, protein molecular weight and directly related to the concentration and molecular weight of chitosan. Protein release rates increased with particle size and were generally inversely related to protein molecular weight. This study demonstrates that chitosan nano/microparticles with high protein loading efficiencies can be engineered with well-defined sizes and controllable release kinetics through manipulation of specific formulation parameters. PMID:24560459

  4. Chitosan-Based Nanomedicine to Fight Genital Candida Infections: Chitosomes.

    Science.gov (United States)

    Andersen, Toril; Mishchenko, Ekaterina; Flaten, Gøril Eide; Sollid, Johanna U Ericson; Mattsson, Sofia; Tho, Ingunn; Škalko-Basnet, Nataša

    2017-03-04

    Vaginal infections are associated with high recurrence, which is often due to a lack of efficient treatment of complex vaginal infections comprised of several types of pathogens, especially fungi and bacteria. Chitosan, a mucoadhesive polymer with known antifungal effect, could offer a great improvement in vaginal therapy; the chitosan-based nanosystem could both provide antifungal effects and simultaneously deliver antibacterial drugs. We prepared chitosan-containing liposomes, chitosomes, where chitosan is both embedded in liposomes and surface-available as a coating layer. For antimicrobial activity, we entrapped metronidazole as a model drug. To prove that mucoadhesivness alone is not sufficient for successful delivery, we used Carbopol-containing liposomes as a control. All vesicles were characterized for their size, zeta potential, entrapment efficiency, and in vitro drug release. Chitosan-containing liposomes were able to assure the prolonged release of metronidazole. Their antifungal activity was evaluated in a C. albicans model; chitosan-containing liposomes exhibited a potent ability to inhibit the growth of C. albicans. The presence of chitosan was crucial for the system's antifungal activity. The antifungal efficacy of chitosomes combined with antibacterial potential of the entrapped metronidazole could offer improved efficacy in the treatment of mixed/complex vaginal infections.

  5. Superhydrophobic chitosan-based coatings for textile processing

    Energy Technology Data Exchange (ETDEWEB)

    Ivanova, N.A., E-mail: NAI-72@yandex.ru [Ivanovo State Textile Academy, F. Engels Avenue 21, 153000 Ivanovo (Russian Federation); Philipchenko, A.B. [Kazan State Medical University, Butlerova 49, 420012 Kazan, Tatarstan (Russian Federation)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer Chitosan nanoparticles can be used for design of the superhydrophobic anti-bacterial textile. Black-Right-Pointing-Pointer Spraying the nanoparticle dispersion allows one to get multiscale textured coating. Black-Right-Pointing-Pointer Relative number of fluoroanions per elementary unit of chitosan plays the crucial role in the structure of aggregates and coating wettability. - Abstract: A simple method to design the superhydrophobic anti-bacterial textile for biomedical applications was developed. For the coating formulation the spraying of nanoparticles dispersion over the textile sample was applied, allowing the way to get multiscale textured layer on a top of cotton fabric. The anti-bacterial functionality of coating is supported by using chitosan-based nanoparticles. In our approach the fabrication of nanoparticles was based on electrostatic interaction between amine group of chitosan and negatively charged fluoroanion. It was demonstrated that the relative number of fluoroanions per elementary unit of chitosan plays the crucial role in the structure of aggregates in the coating and its wettability as well as in durability of coatings in contact with aqueous media.

  6. of Clove on Physicochemical Properties of Chitosan-Based Films

    Directory of Open Access Journals (Sweden)

    Paola Reyes-Chaparro

    2015-01-01

    Full Text Available Mechanical and barrier properties of chitosan films prepared with essential oils of clove and functional extract were studied. The films made with functional extracts (esters E6 and E7 presented the significant increment of extensibility compared with the untreated chitosan films. In the case of punction test, the films made with the esters E6 and E7 resisted more the applied strength before tearing up compared with the chitosan control film (without any treatment. Thermogravimetric analysis values were determined for the chitosan control film and chitosan film treated with clove essential oil obtaining 112.17°C and 176.73°C, respectively. Atomic force microscopy (AFM was used to determine their morphology by analyzing their surfaces and phase arrangement; AFM was also used to observe the porosity in chitosan-based antimicrobial films and the chitosan films incorporating functional extracts. The water vapour permeability (WVP data showed that incorporating the functional extract to the formulation of films has a positive effect on water vapour barrier properties. In general, the incorporation of essential oils and functional extract of clove at 20% in chitosan films caused microstructural changes that were dependent on the different affinity of components.

  7. Building the UPPA high capacity tensiometer

    Directory of Open Access Journals (Sweden)

    Mendes Joao

    2016-01-01

    Full Text Available High capacity tensiometers (HCTs are sensors capable of directly measuring tensile pore water pressure (suction in soils. HCTs are typically composed of a casing that encapsulates a high air entry value ceramic filter, a water reservoir and a pressure sensing element. Since the creation of the first HCT by Ridley and Burland in 1993 at Imperial College London, HCTs have been almost exclusively built and used in academic research. The limited use in industrial applications can be explained by a lack of unsaturated soil mechanics knowledge among engineering practitioners but also by the technical difficulties associated to the direct measurement of tensile water pressures beyond the cavitation limit of -100kPa. In this paper, we present the recent design and manufacture of a new HCT at the Université de Pau et des Pays de l’Adour (UPPA in France. Different prototypes were tried by changing the main components of the device including the type of ceramic filter, pressure transducer and geometry of the external casing. In particular, two ceramic filters of distinct porosity, three pressure transducers with distinct materials/geometries and four casing designs were tested.

  8. Towards green high capacity optical networks

    Science.gov (United States)

    Glesk, I.; Mohd Warip, M. N.; Idris, S. K.; Osadola, T. B.; Andonovic, I.

    2012-02-01

    The demand for fast, secure, energy efficient high capacity networks is growing. It is fuelled by transmission bandwidth needs which will support among other things the rapid penetration of multimedia applications empowering smart consumer electronics and E-businesses. All the above trigger unparallel needs for networking solutions which must offer not only high-speed low-cost "on demand" mobile connectivity but should be ecologically friendly and have low carbon footprint. The first answer to address the bandwidth needs was deployment of fibre optic technologies into transport networks. After this it became quickly obvious that the inferior electronic bandwidth (if compared to optical fiber) will further keep its upper hand on maximum implementable serial data rates. A new solution was found by introducing parallelism into data transport in the form of Wavelength Division Multiplexing (WDM) which has helped dramatically to improve aggregate throughput of optical networks. However with these advancements a new bottleneck has emerged at fibre endpoints where data routers must process the incoming and outgoing traffic. Here, even with the massive and power hungry electronic parallelism routers today (still relying upon bandwidth limiting electronics) do not offer needed processing speeds networks demands. In this paper we will discuss some novel unconventional approaches to address network scalability leading to energy savings via advance optical signal processing. We will also investigate energy savings based on advanced network management through nodes hibernation proposed for Optical IP networks. The hibernation reduces the network overall power consumption by forming virtual network reconfigurations through selective nodes groupings and by links segmentations and partitionings.

  9. Oral iron chelators.

    Science.gov (United States)

    Kwiatkowski, Janet L

    2010-02-01

    Effective chelation therapy can prevent or reverse organ toxicity related to iron overload, yet cardiac complications and premature death continue to occur, largely related to difficulties with compliance in patients who receive parenteral therapy. The use of oral chelators may be able to overcome these difficulties and improve patient outcomes. A chelator's efficacy at cardiac and liver iron removal and side-effect profile should be considered when tailoring individual chelation regimens. Broader options for chelation therapy, including possible combination therapy, should improve clinical efficacy and enhance patient care.

  10. Chitosan-Based Nano-Embedded Microparticles: Impact of Nanogel Composition on Physicochemical Properties

    DEFF Research Database (Denmark)

    Islam, Paromita; Water, Jorrit Jeroen; Bohr, Adam

    2016-01-01

    Chitosan-based nanogels have been widely applied as drug delivery vehicles. Spray-drying of said nanogels allows for the preparation of dry powder nano-embedded microparticles. In this work, chitosan-based nanogels composed of chitosan, alginate, and/or sodium tri-penta phosphate were investigated......, particularly with respect to the impact of composition on the resulting physicochemical properties. Different compositions were obtained as nanogels with sizes ranging from 203 to 561 nm. The addition of alginate and exclusion of sodium tri-penta phosphate led to an increase in nanogel size. The nanogels were...

  11. Effect of chitosan-based edible coating on preservation of white shrimp during partially frozen storage.

    Science.gov (United States)

    Wu, Shengjun

    2014-04-01

    Chitosan and chitooligosaccharides are preservatives with proven antibacterial activity, while glutathione has antioxidant activity. This study investigated the effects of chitosan coating combined with chitooligosaccharides and glutathione (0.8% glutathione+1% chitooligosaccharides+1% chitosan) on preservation of white shrimp (Penaeus vannamei) during partially frozen storage. Chitosan-based coating treatments effectively inhibited bacterial growth, reduced total volatile basic nitrogen and malondialdehyde, and basically maintained the sensory properties of white shrimp (P. vannamei) during partially frozen storage. Therefore, chitosan-based edible coating combined with chitooligosaccharides and glutathione could be a promising antimicrobial and oxidant method to prevent metamorphism of white shrimp with extended shelf life.

  12. Chelation in Metal Intoxication

    Directory of Open Access Journals (Sweden)

    Swaran J.S. Flora

    2010-06-01

    Full Text Available Chelation therapy is the preferred medical treatment for reducing the toxic effects of metals. Chelating agents are capable of binding to toxic metal ions to form complex structures which are easily excreted from the body removing them from intracellular or extracellular spaces. 2,3-Dimercaprol has long been the mainstay of chelation therapy for lead or arsenic poisoning, however its serious side effects have led researchers to develop less toxic analogues. Hydrophilic chelators like meso-2,3-dimercaptosuccinic acid effectively promote renal metal excretion, but their ability to access intracellular metals is weak. Newer strategies to address these drawbacks like combination therapy (use of structurally different chelating agents or co-administration of antioxidants have been reported recently. In this review we provide an update of the existing chelating agents and the various strategies available for the treatment of heavy metals and metalloid intoxications.

  13. Radiation Tolerant, High Capacity Non-Volatile Memory Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The need for reliable, high capacity, radiation tolerant nonvolatile memory exists in many Human space flight applications. Most projects rely on COTS hardware for a...

  14. The Chelate Effect Redefined.

    Science.gov (United States)

    da Silva, J. J. R. Frausto

    1983-01-01

    Discusses ambiguities of the accepted definition of the chelate effect, suggesting that it be defined in terms of experimental observation rather than mathematical abstraction. Indicates that the effect depends on free energy change in reaction, ligand basicity, pH of medium, type of chelates formed, and concentration of ligands in solution. (JN)

  15. Development of a Chitosan-Based Biofoam: Application to the Processing of a Porous Ceramic Material

    Directory of Open Access Journals (Sweden)

    Philippe Michaud

    2011-02-01

    Full Text Available Developing biofoams constitutes a challenging issue for several applications. The present study focuses on the development of a chitosan-based biofoam. Solutions of chitosan in acetic acid were dried under vacuum to generate foams with high-order structures. Chitosan concentration influenced significantly the morphology of developed porosity and the organization of pores in the material. Physico-chemical characterizations were performed to investigate the effects of chitosan concentration on density and thermal conductivity of foams. Even if chitosan-based biofoams exhibit interesting insulating properties (typically around 0.06 W·m−1·K−1, it has been shown that their durabilities are limited when submitted to a wet media. So, a way of application consists to elaborate a ceramic material with open porosity from a slurry prepared with an organic solvent infiltrating the porous network of the foam.

  16. Synthesis and Characterization of Modified Chitosan-based Novel Superabsorbent hydrogel: Swelling and Dye Adsorption behavior

    OpenAIRE

    Oladipo, Akeem Adeyemi

    2011-01-01

    ABSTRACT: Lately, a wide application of eco-friendly polysaccharide-based hydrogels in waste water treatment has received enormous attention in the literature. Particularly, the development of super swelling chitosan-based materials as versatile and useful adsorbent polymeric agent is an expanding area in the field of adsorption science today. The effluents containing dye materials from the processing industries are washed off into rivers and lakes which can be very harmful to creatures. Low...

  17. Synthesis and Characterization of Modified Chitosan-based Novel Superabsorbent hydrogel: Swelling and Dye Adsorption behavior

    OpenAIRE

    Oladipo, Akeem Adeyemi

    2011-01-01

    ABSTRACT: Lately, a wide application of eco-friendly polysaccharide-based hydrogels in waste water treatment has received enormous attention in the literature. Particularly, the development of super swelling chitosan-based materials as versatile and useful adsorbent polymeric agent is an expanding area in the field of adsorption science today. The effluents containing dye materials from the processing industries are washed off into rivers and lakes which can be very harmful to creatures. Low...

  18. REVIEW: CHITOSAN BASED HYDROGEL POLYMERIC BEADS – AS DRUG DELIVERY SYSTEM

    Directory of Open Access Journals (Sweden)

    Manjusha Rani

    2010-11-01

    Full Text Available Chitosan obtained by alkaline deacetylation of chitin is a non-toxic, biocompatible, and biodegradable natural polymer. Chitosan-based hydrogel polymeric beads have been extensively studied as micro- or nano-particulate carriers in the pharmaceutical and medical fields, where they have shown promise for drug delivery as a result of their controlled and sustained release properties, as well as biocompatibility with tissue and cells. To introduce desired properties and enlarge the scope of the potential applications of chitosan, graft copolymerization with natural or synthetic polymers on it has been carried out, and also, various chitosan derivatives have been utilized to form beads. The desired kinetics, duration, and rate of drug release up to therapeutical level from polymeric beads are limited by specific conditions such as beads material and their composition, bead preparation method, amount of drug loading, drug solubility, and drug polymer interaction. The present review summarizes most of the available reports about compositional and structural effects of chitosan-based hydrogel polymeric beads on swelling, drug loading, and releasing properties. From the studies reviewed it is concluded that chitosan-based hydrogel polymeric beads are promising drug delivery systems.

  19. Chitosan-based hydrogel for dye removal from aqueous solutions: Optimization of the preparation procedure

    Science.gov (United States)

    Gioiella, Lucia; Altobelli, Rosaria; de Luna, Martina Salzano; Filippone, Giovanni

    2016-05-01

    The efficacy of chitosan-based hydrogels in the removal of dyes from aqueous solutions has been investigated as a function of different parameters. Hydrogels were obtained by gelation of chitosan with a non-toxic gelling agent based on an aqueous basic solution. The preparation procedure has been optimized in terms of chitosan concentration in the starting solution, gelling agent concentration and chitosan-to-gelling agent ratio. The goal is to properly select the material- and process-related parameters in order to optimize the performances of the chitosan-based dye adsorbent. First, the influence of such factors on the gelling process has been studied from a kinetic point of view. Then, the effects on the adsorption capacity and kinetics of the chitosan hydrogels obtained in different conditions have been investigated. A common food dye (Indigo Carmine) has been used for this purpose. Noticeably, although the disk-shaped hydrogels are in the bulk form, their adsorption capacity is comparable to that reported in the literature for films and beads. In addition, the bulk samples can be easily separated from the liquid phase after the adsorption process, which is highly attractive from a practical point of view. Compression tests reveal that the samples do not breakup even after relatively large compressive strains. The obtained results suggest that the fine tuning of the process parameters allows the production of mechanical resistant and highly adsorbing chitosan-based hydrogels.

  20. Structure Dependence of Lysosomal Transit of Chitosan-Based Polyplexes for Gene Delivery.

    Science.gov (United States)

    Thibault, Marc; Lavertu, Marc; Astolfi, Mélina; Buschmann, Michael D

    2016-10-01

    Chitosan-based polyplexes are known to traffic through lysosomes for a relatively long time, independent of the degree of deacetylation (DDA) and the number average molecular weight (Mn) of the polymer, even though both of these parameters have profound effects on polyplex stability and transfection efficiency. A better understanding of the lysosomal barrier is paramount to the rational design of vectors capable of overcoming obstacles to transgene expression. The aim of the present study was to investigate if lysosomal transit affects chitosan-based polyplex transfection efficiency in a structure-dependent (DDA, Mn) manner. Toward this end, we analyzed the effects of intracellular trafficking modifying agents on transfection efficiency and intracellular vesicular trafficking of polyplexes with different structural properties and stabilities or nucleic acid binding affinity. The use of agents that modify endosome/lysosome acidification and transit processes by distinct mechanisms and their effect on cell viability, polyplex uptake, vesicular trafficking, and transfection efficiency revealed novel and strong chitosan structure-dependent consequences of lysosomal transit. Inhibiting lysosomal transit using chloroquine significantly increased the efficiency of unstable polyplexes, while having minimal effects for polyplexes with intermediate or high stability. In parallel, specifically inhibiting the acidification of vesicles abrogated transfection for all formulations, suggesting that vesicular acidification is essential to promote transfection, most probably by facilitating lysosomal escape. These results provide novel insights into the structure-performance relationship of chitosan-based gene delivery systems.

  1. Potentials of Chitosan-Based Delivery Systems in Wound Therapy: Bioadhesion Study

    Directory of Open Access Journals (Sweden)

    Julia Hurler

    2012-01-01

    Full Text Available Chitosan is currently proposed to be one of the most promising polymers in wound dressing development. Our research focuses on its potential as a vehicle for nano-delivery systems destined for burn therapy. One of the most important features of wound dressing is its bioadhesion to the wounded site. We compared the bioadhesive properties of chitosan with those of Carbopol, a synthetic origin polymer. Chitosan-based hydrogels of different molecular weights were first analyzed by texture analysis for gel cohesiveness, adhesiveness and hardness. In vitro release studies showed no difference in release of model antimicrobial drug from the different hydrogel formulations. Bioadhesion tests were performed on pig ear skin and the detachment force, necessary to remove the die from the skin, and the amount of remaining formulation on the skin were determined. Although no significant difference regarding detachment force could be seen between Carbopol-based and chitosan-based formulations, almost double the amount of chitosan formulation remained on the skin as compared to Carbopol formulations. The findings confirmed the great potential of chitosan-based delivery systems in advanced wound therapy. Moreover, results suggest that formulation retention on the ex vivo skin samples could provide deeper insight on formulation bioadhesiveness than the determination of detachment force.

  2. Chelating polymeric membranes

    KAUST Repository

    Peinemann, Klaus-Viktor

    2015-01-22

    The present application offers a solution to the current problems associated with recovery and recycling of precious metals from scrap material, discard articles, and other items comprising one or more precious metals. The solution is premised on a microporous chelating polymeric membrane. Embodiments include, but are not limited to, microporous chelating polymeric membranes, device comprising the membranes, and methods of using and making the same.

  3. Chelation in metal intoxication

    DEFF Research Database (Denmark)

    Aaseth, Jan; Skaug, Marit Aralt; Cao, yang

    2015-01-01

    The present review provides an update of the general principles for the investigation and use of chelating agents in the treatment of intoxications by metals. The clinical use of the old chelators EDTA (ethylenediamine tetraacetate) and BAL (2,3-dimercaptopropanol) is now limited due to the incon......The present review provides an update of the general principles for the investigation and use of chelating agents in the treatment of intoxications by metals. The clinical use of the old chelators EDTA (ethylenediamine tetraacetate) and BAL (2,3-dimercaptopropanol) is now limited due...... to the inconvenience of parenteral administration, their own toxicity and tendency to increase the neurotoxicity of several metals. The hydrophilic dithiol chelators DMSA (meso-2,3-dimercaptosuccinic acid) and DMPS (2,3-dimercapto-propanesulphonate) are less toxic and more efficient than BAL in the clinical treatment...... of heavy metal poisoning, and available as capsules for oral use. In copper overload, DMSA appears to be a potent antidote, although d-penicillamine is still widely used. In the chelation of iron, the thiols are inefficient, since iron has higher affinity for ligands with nitrogen and oxygen, but the new...

  4. High capacity anode materials for lithium ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, Herman A.; Anguchamy, Yogesh Kumar; Deng, Haixia; Han, Yongbon; Masarapu, Charan; Venkatachalam, Subramanian; Kumar, Suject

    2015-11-19

    High capacity silicon based anode active materials are described for lithium ion batteries. These materials are shown to be effective in combination with high capacity lithium rich cathode active materials. Supplemental lithium is shown to improve the cycling performance and reduce irreversible capacity loss for at least certain silicon based active materials. In particular silicon based active materials can be formed in composites with electrically conductive coatings, such as pyrolytic carbon coatings or metal coatings, and composites can also be formed with other electrically conductive carbon components, such as carbon nanofibers and carbon nanoparticles. Additional alloys with silicon are explored.

  5. Fabrication and evaluation of a sustained-release chitosan-based scaffold embedded with PLGA microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Song, Kedong, E-mail: kedongsong@dlut.edu.cn [Dalian R and D Center for Stem Cell and Tissue Engineering, State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China); Liu, Yingchao [Dalian R and D Center for Stem Cell and Tissue Engineering, State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China); Macedo, Hugo M. [Biological Systems Engineering Laboratory, Department of Chemical Engineering, Department of Chemical Engineering, South Kensington Campus, London SW7 2AZ (United Kingdom); Jiang, Lili; Li, Chao; Mei, Guanyu [Dalian R and D Center for Stem Cell and Tissue Engineering, State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China); Liu, Tianqing, E-mail: liutq@dlut.edu.cn [Dalian R and D Center for Stem Cell and Tissue Engineering, State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China)

    2013-04-01

    Nutrient depletion within three-dimensional (3D) scaffolds is one of the major hurdles in the use of this technology to grow cells for applications in tissue engineering. In order to help in addressing it, we herein propose to use the controlled release of encapsulated nutrients within polymer microspheres into chitosan-based 3D scaffolds, wherein the microspheres are embedded. This method has allowed maintaining a stable concentration of nutrients within the scaffolds over the long term. The polymer microspheres were prepared using multiple emulsions (w/o/w), in which bovine serum albumin (BSA) and poly (lactic-co-glycolic) acid (PLGA) were regarded as the protein pattern and the exoperidium material, respectively. These were then mixed with a chitosan solution in order to form the scaffolds by cryo-desiccation. The release of BSA, entrapped within the embedded microspheres, was monitored with time using a BCA kit. The morphology and structure of the PLGA microspheres containing BSA before and after embedding within the scaffold were observed under a scanning electron microscope (SEM). These had a round shape with diameters in the range of 27–55 μm, whereas the chitosan-based scaffolds had a uniform porous structure with the microspheres uniformly dispersed within their 3D structure and without any morphological change. In addition, the porosity, water absorption and degradation rate at 37 °C in an aqueous environment of 1% chitosan-based scaffolds were (92.99 ± 2.51) %, (89.66 ± 0.66) % and (73.77 ± 3.21) %, respectively. The studies of BSA release from the embedded microspheres have shown a sustained and cumulative tendency with little initial burst, with (20.24 ± 0.83) % of the initial amount released after 168 h (an average rate of 0.12%/h). The protein concentration within the chitosan-based scaffolds after 168 h was found to be (11.44 ± 1.81) × 10{sup −2} mg/mL. This novel chitosan-based scaffold embedded with PLGA microspheres has proven to be a

  6. Micro-machined high capacity silicon load cells

    NARCIS (Netherlands)

    Zwijze, A.F.

    2000-01-01

    The aim of the research presented in this thesis is to improve the performance of high capacity conventional load cells or force sensors by using silicon as the base material. Silicon is used because it offers the possibility of realising small, light, low cost and high performance mechanical sensor

  7. Chelation Therapy for Mercury Poisoning

    Directory of Open Access Journals (Sweden)

    Rong Guan

    2009-01-01

    Full Text Available Chelation therapy has been the major treatment for heavy metal poisoning. Various chelating agents have been developed and tested for treatment of heavy metal intoxications, including mercury poisoning. It has been clearly shown that chelating agents could rescue the toxicity caused by heavy metal intoxication, but the potential preventive role of chelating agents against heavy metal poisoning has not been explored much. Recent paper by Siddiqi and colleagues has suggested a protective role of chelating agents against mercury poisoning, which provides a promising research direction for broader application of chelation therapy in prevention and treatment of mercury poisoning.

  8. Recycling rice husks for high-capacity lithium battery anodes.

    Science.gov (United States)

    Jung, Dae Soo; Ryou, Myung-Hyun; Sung, Yong Joo; Park, Seung Bin; Choi, Jang Wook

    2013-07-23

    The rice husk is the outer covering of a rice kernel and protects the inner ingredients from external attack by insects and bacteria. To perform this function while ventilating air and moisture, rice plants have developed unique nanoporous silica layers in their husks through years of natural evolution. Despite the massive amount of annual production near 10(8) tons worldwide, so far rice husks have been recycled only for low-value agricultural items. In an effort to recycle rice husks for high-value applications, we convert the silica to silicon and use it for high-capacity lithium battery anodes. Taking advantage of the interconnected nanoporous structure naturally existing in rice husks, the converted silicon exhibits excellent electrochemical performance as a lithium battery anode, suggesting that rice husks can be a massive resource for use in high-capacity lithium battery negative electrodes.

  9. Chitosan-Based Aerogel Membrane for Robust Oil-in-Water Emulsion Separation.

    Science.gov (United States)

    Chaudhary, Jai Prakash; Vadodariya, Nilesh; Nataraj, Sanna Kotrappanavar; Meena, Ramavatar

    2015-11-11

    Here, we demonstrate direct recovery of water from stable emulsion waste using aerogel membrane. Chitosan-based gel was transformed into highly porous aerogel membrane using bio-origin genipin as cross-linking agent. Aerogel membranes were characterized for their morphology using SEM, chemical composition by FTIR and solid-UV. Further, aerogel was tested for recovery of high quality water from oil spill sample collected from ship breaking yard. High quality (with >99% purity) water was recovered with a flux rate of >600 L·m(-2)·h(-1)·bar(-1). After repeated use, aerogel membranes were tested for greener disposal possibilities by biodegrading membrane in soil.

  10. Chelation Therapy for Mercury Poisoning

    OpenAIRE

    Rong Guan; Han Dai

    2009-01-01

    Chelation therapy has been the major treatment for heavy metal poisoning. Various chelating agents have been developed and tested for treatment of heavy metal intoxications, including mercury poisoning. It has been clearly shown that chelating agents could rescue the toxicity caused by heavy metal intoxication, but the potential preventive role of chelating agents against heavy metal poisoning has not been explored much. Recent paper by Siddiqi and colleagues has suggested a protective role o...

  11. Chitosan-based copper nanocomposite accelerates healing in excision wound model in rats.

    Science.gov (United States)

    Gopal, Anu; Kant, Vinay; Gopalakrishnan, Anu; Tandan, Surendra K; Kumar, Dinesh

    2014-05-15

    Copper possesses efficacy in wound healing which is a complex phenomenon involving various cells, cytokines and growth factors. Copper nanoparticles modulate cells, cytokines and growth factors involved in wound healing in a better way than copper ions. Chitosan has been shown to be beneficial in healing because of its antibacterial, antifungal, biocompatible and biodegradable polymeric nature. In the present study, chitosan-based copper nanocomposite (CCNC) was prepared by mixing chitosan and copper nanoparticles. CCNC was applied topically to evaluate its wound healing potential and to study its effects on some important components of healing process in open excision wound model in adult Wistar rats. Significant increase in wound contraction was observed in the CCNC-treated rats. The up-regulation of vascular endothelial growth factor (VEGF) and transforming growth factor-beta1(TGF-β1) by CCNC-treatment revealed its role in facilitating angiogenesis, fibroblast proliferation and collagen deposition. The tumor necrosis factor-α (TNF-α) and interleukin-10 (IL-10) were significantly decreased and increased, respectively, in CCNC-treated rats. Histological evaluation showed more fibroblast proliferation, collagen deposition and intact re-epithelialization in CCNC-treated rats. Immunohistochemistry of CD31 revealed marked increase in angiogenesis. Thus, we concluded that chitosan-based copper nanocomposite efficiently enhanced cutaneous wound healing by modulation of various cells, cytokines and growth factors during different phases of healing process.

  12. Enhanced wound healing activity of desert locust (Schistocerca gregaria) vs. shrimp (Penaeus monodon) chitosan based scaffolds.

    Science.gov (United States)

    Marei, Narguess H; El-Mazny, W; El-Shaer, Aida; Zaki, Kareem Dorri; Hussein, Zahra S; Abd-El-Samie, Emtithal M

    2017-04-01

    Chitosan (CS) has received great attention in tissue engineering, especially in wound healing acceleration. In this study, chitin was isolated from desert locust (Schistocerca gregaria) and shrimp (Penaeus monodon) then deacetylated to chitosan. Then, chitosan was characterized by degree of deacetylation (DD), molecular weight (M.Wt), swelling index (SI), Fourier transform infrared (FTIR) and X ray diffraction (XRD). The chitosan was then casted into 2D scaffolds and was pictured using scanning electron microscope (SEM). In a comparative study, primary cell cultures of neonatal (1-2day old) mice skin tissue, supplemented with 10% fetal calf serum, were seeded onto locust chitosan based scaffolds (LCSBS) and shrimp chitosan based scaffold (SCSBS). Their attachment percentage was determined after 1h. The cell proliferation rate was tested for 5days on LCSBS and SCSBS. Wound healing activity progress of LCSBS and SCSBS was tested in vivo using histopathology, and results revealed that seeded and unseeded LCSBS accelerated healing in contrast to SCSBS. The data demonstrated that LCSBS shows a high degree of biocompatibility in vivo. These results suggest that LCSBS is a potential substitute for the development of low cost implantable materials to accelerate wound healing. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Evaluation of Chitosan Based Polymeric Matrices for Sustained Stomach Specific Delivery of Propranolol Hydrochloride

    Directory of Open Access Journals (Sweden)

    Juhi Dubey

    2015-01-01

    Full Text Available The objective of the present investigation was to explore the potential of Chitosan based polymeric matrices as carrier for sustained stomach specific delivery of model drug Propranolol Hydrochloride. Briefly, single unit hydrodynamically balanced (HBS capsule formulations were prepared by encapsulating in hard gelatin capsules, intimately mixed physical mixtures of drug, and cationic low molecular weight Chitosan (LMCH in combination with either anionic medium viscosity sodium alginate (MSA or sodium carboxymethylcellulose (CMCNa. The effect of incorporation of nonionic polymers, namely, tamarind seed gum (TSG and microcrystalline cellulose (MCCP, was also investigated. It was observed that HBS formulations remained buoyant for up to 6 h in 0.1 M HCl, when LMCH : anionic/nonionic polymer ratio was at least 4 : 1. It was also observed that LMCH has formed polyelectrolyte complex (PEC with MSA (4 : 1.5 ratio and CMCNa (4 : 1 ratio in situ during the gelation of HBS formulations in 0.1 M HCl. The retardation in drug release was attributed to the PEC formation between LMCH and MSA/CMCNa. Incorporation of MCCP (rapid gel formation and TSG (Plug formation was found to be innovative. From the data, it is suggested that Chitosan based polymeric matrices may constitute an excellent carrier for stomach specific drug delivery.

  14. Chitosan-Based Nano-Embedded Microparticles: Impact of Nanogel Composition on Physicochemical Properties.

    Science.gov (United States)

    Islam, Paromita; Water, Jorrit J; Bohr, Adam; Rantanen, Jukka

    2016-12-22

    Chitosan-based nanogels have been widely applied as drug delivery vehicles. Spray-drying of said nanogels allows for the preparation of dry powder nano-embedded microparticles. In this work, chitosan-based nanogels composed of chitosan, alginate, and/or sodium tri-penta phosphate were investigated, particularly with respect to the impact of composition on the resulting physicochemical properties. Different compositions were obtained as nanogels with sizes ranging from 203 to 561 nm. The addition of alginate and exclusion of sodium tri-penta phosphate led to an increase in nanogel size. The nanogels were subsequently spray-dried to form nano-embedded microparticles with trehalose or mannitol as matrix excipient. The microparticles of different composition were mostly spherical with a smooth surface and a mass median aerodynamic diameter of 6-10 µm. Superior redispersibility was observed for microparticles containing amorphous trehalose. This study demonstrates the potential of nano-embedded microparticles for stabilization and delivery of nanogel-based delivery systems.

  15. Preparation of a Novel Chitosan Based Biopolymer Dye and Application in Wood Dyeing

    Directory of Open Access Journals (Sweden)

    Xiaoqian Wang

    2016-09-01

    Full Text Available A novel chitosan-based biopolymer dye possessing antibacterial properties was synthesized by reaction of O-carboxymethyl chitosan and Acid Red GR. The synthesized materials were characterized by Fourier transform infrared spectroscopy (FTIR, degree of substitution (DS, X-ray photoelectron spectroscopy (XPS, thermogravimetric analysis (TG, X-ray diffraction (XRD, water solubility test, antibacterial property test, and dyeing performance, including dye uptake, color difference, and fastness. Results showed that the synthesized dye was combined by –NH3+ of O-carboxymethyl chitosan and the sulfonic group of Acid Red GR. According to the comprehensive analysis of XRD and water solubility, the introduction of the carboxymethyl group and acid dye molecule changed the structure of the chitosan from compact to loose, which improved the synthesized dye’s water solubility. However, the thermal stability of the synthesized dye was decreased. The antibacterial property of the poplar wood dyed with the synthesized dye was enhanced and its antibacterial rate, specifically against Staphylococcus aureus and Escherichia coli, also increased to a rate of more than 99%. However, the dye uptake of the synthesized dye was lower than that of the original dye. Despite this, though, the dyeing effect of the synthesized dye demonstrated better water-fastness, and light-fastness than the original dye. Therefore, the novel chitosan-based biopolymer dye can be a promising product for wood dyeing.

  16. High-capacity nanocarbon anodes for lithium-ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Haitao; Sun, Xianzhong; Zhang, Xiong; Lin, He; Wang, Kai; Ma, Yanwei, E-mail: ywma@mail.iee.ac.cn

    2015-02-15

    Highlights: • The nanocarbon anodes in lithium-ion batteries deliver a high capacity of ∼1100 mA h g{sup −1}. • The nanocarbon anodes exhibit excellent cyclic stability. • A novel structure of carbon materials, hollow carbon nanoboxes, has potential application in lithium-ion batteries. - Abstract: High energy and power density of secondary cells like lithium-ion batteries become much more important in today’s society. However, lithium-ion battery anodes based on graphite material have theoretical capacity of 372 mA h g{sup −1} and low charging-discharging rate. Here, we report that nanocarbons including mesoporous graphene (MPG), carbon tubular nanostructures (CTN), and hollow carbon nanoboxes (HCB) are good candidate for lithium-ion battery anodes. The nanocarbon anodes have high capacity of ∼1100, ∼600, and ∼500 mA h g{sup −1} at 0.1 A g{sup −1} for MPG, CTN, and HCB, respectively. The capacity of 181, 141, and 139 mA h g{sup −1} at 4 A g{sup −1} for MPG, CTN, and HCB anodes is retained. Besides, nanocarbon anodes show high cycling stability during 1000 cycles, indicating formation of a passivating layer—solid electrolyte interphase, which support long-term cycling. Nanocarbons, constructed with graphene layers which fulfill lithiation/delithiation process, high ratio of graphite edge structure, and high surface area which facilitates capacitive behavior, deliver high capacity and improved rate-capability.

  17. Cycloaddition in peptides for high-capacity optical storage

    DEFF Research Database (Denmark)

    Lohse, Brian; Berg, Rolf Henrik; Hvilsted, Søren

    2006-01-01

    Photodimerization of chromophores attached to a short peptide chain is investigated for high-capacity optical digital storage with UV lasers. The length and rigidity of the peptide chain assure an optimal distance and orientation of the chromophores for effective photodimerization. Using a theory...... developed by Tomlinson, the absorption cross section for the dimerization process in a uracil-ornithine-based hexamer is determined to be 9 x 10(-20) cm(2). A large change in the transmission due to irradiation in the UV area may make it possible to realize multilevel storage in a thin film of the peptides....

  18. High capacity 30 K remote helium cooling loop

    Science.gov (United States)

    Trollier, T.; Tanchon, J.; Icart, Y.; Ravex, A.

    2014-01-01

    Absolut System has built several 50 K remote helium cooling loops used as high capacity and very low vibration cooling source into large wavelength IR detectors electro-optical characterization test benches. MgB2 based superconducting electro-technical equipment's under development require also distributed high cooling power in the 20-30 K temperature range. Absolut System has designed, manufactured and tested a high capacity 30 K remote helium cooling loop. The equipment consists of a CRYOMECH AL325 type cooler, a CP830 type compressor package used as room temperature circulator and an intermediate LN2 bath cooling used between two recuperator heat exchangers (300 K-77 K and 77 K-20 K). A cooling capacity of 30 W @ 20 K or 80 W @ 30 K has been demonstrated on the application heat exchanger, with a 4-meter remote distance ensured by a specifically designed gas circulation flexible line. The design and the performance will be reported in this paper.

  19. High-capacity hydrogen storage in Al-adsorbed graphene

    Science.gov (United States)

    Ao, Z. M.; Peeters, F. M.

    2010-05-01

    A high-capacity hydrogen storage medium—Al-adsorbed graphene—is proposed based on density-functional theory calculations. We find that a graphene layer with Al adsorbed on both sides can store hydrogen up to 13.79wt% with average adsorption energy -0.193eV/H2 . Its hydrogen storage capacity is in excess of 6wt% , surpassing U. S. Department of Energy (DOE’s) target. Based on the binding-energy criterion and molecular-dynamics calculations, we find that hydrogen storage can be recycled at near ambient conditions. This high-capacity hydrogen storage is due to the adsorbed Al atoms that act as bridges to link the electron clouds of the H2 molecules and the graphene layer. As a consequence, a two-layer arrangement of H2 molecules is formed on each side of the Al-adsorbed graphene layer. The H2 concentration in the hydrogen storage medium can be measured by the change in the conductivity of the graphene layer.

  20. Use of a chitosan based natural coating materials to reduce spoilage and pathogenic bacteria on poultry products

    Science.gov (United States)

    Chitosan is a natural compound with proven antimicrobial activity having GRAS status (generally recognized as safe) as determined by the United States Food and Drug Administration (Smith et al., 2014). Efforts are underway to develop and improve the use of chitosan based films as packaging material...

  1. High Capacity and Resistance to Additive Noise Audio Steganography Algorithm

    Directory of Open Access Journals (Sweden)

    Haider Ismael Shahadi

    2011-09-01

    Full Text Available Steganography is the art of message hiding in a cover signal without attracting attention. The requirements of the good steganography algorithm are security, capacity, robustness and imperceptibility, all them are contradictory, therefore, satisfying all together is not easy especially in audio cover signal because human auditory system (HAS has high sensitivity to audio modification. In this paper, we proposed a high capacity audio steganography algorithm with good resistance to additive noise. The proposed algorithm is based on wavelet packet transform and blocks matching. It has capacity above 35% of the input audio file size with acceptable signal to noise ratio. Also, it is resistance to additive Gaussian noise to about 25 db. Furthermore, the reconstruction of actual secret messages does not require the original cover audio signal.

  2. Hydrophilic carbon clusters as therapeutic, high capacity antioxidants

    Science.gov (United States)

    Samuel, Errol L. G.; Duong, MyLinh T.; Bitner, Brittany R.; Marcano, Daniela C.; Tour, James M.; Kent, Thomas A.

    2014-01-01

    Oxidative stress reflects an excessive accumulation of reactive oxygen species (ROS) and is a hallmark of several acute and chronic human pathologies. While many antioxidants have been investigated, the majority have demonstrated poor efficacy in clinical trials. Here, we discuss limitations of current antioxidants and describe a new class of nanoparticle antioxidants, poly(ethylene glycol)-functionalized hydrophilic carbon clusters (PEG-HCCs). PEG-HCCs show high capacity to annihilate ROS such as superoxide and hydroxyl radicals, show no reactivity toward nitric oxide, and can be functionalized with targeting moieties without loss of activity. Given these properties, we propose that PEG-HCCs offer an exciting new area of study for treatment of numerous ROS-induced human pathologies. PMID:25175886

  3. Holographic memory module with ultra-high capacity and throughput

    Energy Technology Data Exchange (ETDEWEB)

    Vladimir A. Markov, Ph.D.

    2000-06-04

    High capacity, high transfer rate, random access memory systems are needed to archive and distribute the tremendous volume of digital information being generated, for example, the human genome mapping and online libraries. The development of multi-gigabit per second networks underscores the need for next-generation archival memory systems. During Phase I we conducted the theoretical analysis and accomplished experimental tests that validated the key aspects of the ultra-high density holographic data storage module with high transfer rate. We also inspected the secure nature of the encoding method and estimated the performance of full-scale system. Two basic architectures were considered, allowing for reversible compact solid-state configuration with limited capacity, and very large capacity write once read many memory system.

  4. Chelated minerals for poultry

    Directory of Open Access Journals (Sweden)

    SL Vieira

    2008-06-01

    Full Text Available Organic minerals have been subject of an increasing number of investigations recently. These compounds can be considered the most significant event regarding commercial forms of minerals targeting animal supplementation in the last decades. Minerals, especially metals, are usually supplemented in poultry feeds using cheap saline sources and have never required a lot of attention in terms of quality. On the other hand, definitions of organic minerals are very broad and frequently lead to confusion when decision-making becomes necessary. Organic minerals include any mineral bound to organic compounds, regardless of the type of existing bond between mineral and organic molecules. Proteins and carbohydrates are the most frequent candidates in organic mineral combinations. Organic fraction size and bond type are not limitations in organic mineral definition; however, essential metals (Cu, Fe, Zn, and Mn can form coordinated bonds, which are stable in intestinal lumen. Metals bound to organic ligands by coordinated bonds can dissociate within animal metabolism whereas real covalent bonds cannot. Chelated minerals are molecules that have a metal bound to an organic ligand through coordinated bonds; but many organic minerals are not chelates or are not even bound through coordinated bonds. Utilization of organic minerals is largely dependent on the ligand; therefore, amino acids and other small molecules with facilitated access to the enterocyte are supposed to be better utilized by animals. Organic minerals with ligands presenting long chains may require digestion prior to absorption. After absorption, organic minerals may present physiological effects, which improve specific metabolic responses, such as the immune response. Many studies have demonstrated the benefits of metal-amino acid chelates on animal metabolism, but the detection positive effects on live performance is less consistent.

  5. Thermosensitive chitosan-based hydrogels for sustained release of ferulic acid on corneal wound healing.

    Science.gov (United States)

    Tsai, Ching-Yao; Woung, Lin-Chung; Yen, Jiin-Cherng; Tseng, Po-Chen; Chiou, Shih-Hwa; Sung, Yen-Jen; Liu, Kuan-Ting; Cheng, Yung-Hsin

    2016-01-01

    Oxidative damage to cornea can be induced by alkaline chemical burn which may cause vision loss or blindness. Recent studies showed that exogenous application of natural antioxidants may be a potential treatment for corneal wound healing. However, low ocular bioavailability and short residence time are the limiting factors of topically administered antioxidants. Ferulic acid (FA) is a natural phenolic compound and an excellent antioxidant. The study was aimed to investigate the effects of FA in corneal epithelial cells (CECs) under oxidative stress and evaluate the feasibility of use the thermosensitive chitosan-based hydrogel containing FA for corneal wound healing. The results demonstrated that post-treatment of FA on CECs could decrease the inflammation-level and apoptosis. In the rabbit corneal alkali burn model, post-treatment FA-loaded hydrogel may promote the corneal wound healing. The results of study suggest that FA-loaded hydrogel may have the potential applications in treating corneal alkali burn.

  6. Chitosan-Based Hyaluronic Acid Hybrid Polymer Fibers as a Scaffold Biomaterial for Cartilage Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Shintarou Yamane

    2010-12-01

    Full Text Available An ideal scaffold material is one that closely mimics the natural environment in the tissue-specific extracellular matrix (ECM. Therefore, we have applied hyaluronic acid (HA, which is a main component of the cartilage ECM, to chitosan as a fundamental material for cartilage regeneration. To mimic the structural environment of cartilage ECM, the fundamental structure of a scaffold should be a three-dimensional (3D system with adequate mechanical strength. We structurally developed novel polymer chitosan-based HA hybrid fibers as a biomaterial to easily fabricate 3D scaffolds. This review presents the potential of a 3D fabricated scaffold based on these novel hybrid polymer fibers for cartilage tissue engineering.

  7. Synthesis and characterization of chitosan-based polyelectrolyte complexes, doped by quantum dots

    Science.gov (United States)

    Abuzova, N. V.; Gerasimova, M. A.; Slabko, V. V.; Slyusareva, E. A.

    2015-12-01

    Doping of polymer particles by a fluorophores results in the sensitization within the visible spectral region becoming very promising materials for sensor applications. Colloids of biocompatible chitosan-based polyelectrolyte complexes (PECs) doped with quantum dots (QD) of CdTe and CdSe/ZnS (with sizes of 2.0-2.4 nm) were synthesized and characterized by scanning electron microscopy, dynamic light scattering, ζ-potential measurements, absorption and luminescence (including time-resolved) spectroscopy. The influence of ionic strength (0.02-1.5 M) on absorption and photoluminescence properties of encapsulated into PEC and unencapsulated quantum dots was investigated. The stability of the emission intensity of the encapsulated quantum dots has been shown to be strongly dependent on concentration of quantum dots.

  8. ANTIBACTERIAL THERMOPLASTIC STARCH-CHITOSAN BASED MATERIALS PREPARED BY MELT-MIXING

    Directory of Open Access Journals (Sweden)

    Liliana C. Tomé,

    2012-06-01

    Full Text Available Antibacterial thermoplastic starch-chitosan based materials were successfully prepared by melt-mixing. The effect of chitosan modification (quaternization and grafting of long carbon chains on the properties of the materials was also studied. All the ensuing materials were characterized in terms of thermal stability, crystalline structure, mechanical performance, and antibacterial activity. The incorporation of chitosan and its derivatives into the thermoplastic starch matrices resulted in an increment in tensile strengths (up to 85%; however for higher chitosan contents (5 and 7.5 wt.%, a decrease on the Young’s modulus (around 50% was observed, together with an increment in the elongation at break, which can be attributed to the prevention of the retrogradation process. Finally, the thermoplastic starch materials incorporated with 7.5 wt% of the unmodified chitosan and of the water-soluble chitosan derivative had partial (about 20% reduction of CFU and total bactericidal effect against S. aureus.Keywords

  9. Morphological, Mechanical and Thermal Study of ZnO Nanoparticle Reinforced Chitosan Based Transparent Biocomposite Films

    Science.gov (United States)

    Das, Kunal; Maiti, Sonakshi; Liu, Dagang

    2014-04-01

    Chitosan based biocomposite transparent films reinforced with zinc oxide (ZnO) nanoparticles at different loading i.e. 2, 4 and 6 wt% were successfully prepared by solution casting method. Shape, size and geometry of the zinc oxide nanoparticles were characterized by scanning electron microscopy (SEM). The biocomposite films were subjected to mechanical characterization, thermal analysis, morphology study and moisture uptake behaviour. The characterization tools used here include wide angle X-ray diffraction study, scanning electron microscopic analysis, differential scanning calorimetric analysis and also UV-visible transmittance behavior. SEM micrographs revealed uniformly dispersed ZnO nanoparticles in biocomposite films. Improvement of the tensile strength about 133 % was observed significantly in case of 4 wt% loaded chitosan/ZnO films with respect to the neat chitosan film. 43 % higher transparency was observed in case of 2 wt% ZnO loaded biocomposites films, thus indicating the best combination of properties of 2 wt% ZnO loaded biocomposite films.

  10. Entrapment of carbon dioxide with chitosan-based core-shell particles containing changeable cores.

    Science.gov (United States)

    Dong, Yanrui; Fu, Yinghao; Lin, Xia; Xiao, Congming

    2016-08-01

    Water-soluble chitosan-based core-shell particles that contained changeable cores were successfully applied to anchor carbon dioxide. The entrapment capacity of the particles for carbon dioxide (EC) depended on the cores. It was found that EC of the particles contained aqueous cores was higher than that of the beads with water-soluble chitosan gel cores, which was confirmed with thermogravimetric analysis. In addition, calcium ions and sodium hydroxide were introduced within the particles to examine their effect on the entrapment. EC of the particles was enhanced with sodium hydroxide when the cores were WSC gel. The incorporation of calcium ions was helpful for stabilizing carbon dioxide through the formation of calcium carbonate, which was verified with Fourier transform infrared spectra and scanning electron microscopy/energy-dispersive spectrometry. This phenomenon meant the role of calcium ions for fixating carbon dioxide was significant.

  11. Chitosan-Based Zwitterionic Polyelectrolytes and Their N-Phosphobetainates: Facile Synthesis and Aqueous Solution Behaviors

    Institute of Scientific and Technical Information of China (English)

    Hongmei Kang; Yuanli Cai; Haijia Zhang; Junjie Deng; Pengsheng Liu

    2005-01-01

    @@ 1Introduction Chitosan has remarkable potential applications in pharmaceutical and cosmetic formulations[1], e.g. for drug delivery systems, tissue engineering, transplant and cell regeneration due to its excellent biocompatibility, biodegradability, mucoadhesion, etc. Its major drawback as considered for pharmaceutical and cosmetic formulations is its poor solubility due to strong hydrogen bonding and compact structures. Considerable efforts were focused on improving its solubility and enforcing its functionality[1]. As well-known that phosphorylcholine (PC), the structural component of cell membrane, is an amphiphile containing the zwitterionic quaternary ammonium and phosphonic acid moieties (phosphobetaine groups). There has been an intensive effort over the past decades to prepare and explore potential applications of the synthetic PC-polymers[2].In this paper, we describe a facile synthesis of chitosan derivatives containing zwitterionic secondary/tertiary amine and phosphonic acid groups and their further N-phosphobetainates. The polyelectrolyte effect and anti-polyelectrolyte effect of the chitosan-based zwitterionic polyelectrolytes were studied.

  12. Tracking inhomogeneity in high-capacity lithium iron phosphate batteries

    Science.gov (United States)

    Paxton, William A.; Zhong, Zhong; Tsakalakos, Thomas

    2015-02-01

    Energy-dispersive x-ray diffraction (EDXRD) is one of the few techniques that can internally probe a sealed battery under operating conditions. In this paper, we use EDXRD with ultrahigh energy synchrotron radiation to track inhomogeneity in a cycled high-capacity lithium iron phosphate cell under in-situ and operando conditions. A sequence of depth-profile x-ray diffraction spectra are collected with 40 μm resolution as the cell is discharged. Additionally, nine different locations of the cell are tracked independently throughout a second discharge process. In each case, a two-peak reference intensity ratio analysis (RIR) was used on the LiFePO4 311 and the FePO4 020 reflections to estimate the relative phase abundance of the lithiated and non-lithiated phases. The data provide a first-time look at the dynamics of electrochemical inhomogeneity in a real-world battery. We observe a strong correlation between inhomogeneity and overpotential in the galvanic response of the cell. Additionally, the data closely follow the behavior that is predicted by the resistive-reactant model originally proposed by Thomas-Alyea. Despite a non-linear response in the independently measured locations, the behavior of the ensemble is strikingly linear. This suggests that effects of inhomogeneity can be elusive and highlights the power of the EDXRD technique.

  13. Space qualification of high capacity grooved heat pipes

    Energy Technology Data Exchange (ETDEWEB)

    Dubois, M.; Mullender, B.; Druart, J. [SABCA, Societe Anomyme Belgel de Construction Aeronautique (Belgium); Supper, W.; Beddows, A. [ESTEC-The (Netherlands)

    1996-12-31

    Based on the thermal requirements of the future telecommunication satellites, the development of a High Capacity Grooved Heat Pipe (HPG), was contracted by ESA to SABCA leading to an aluminium extruded heat pipe (outer diameter of 25 mm) based on a multi re-entrant grooves design. After an intensive acceptance test campaign whose results showed a good confidence in the design and the fulfillment of the required specifications of heat transport and on tilt capability (experimental maximum heat transport capability of 1500 Watt metres for a vapour temperature of 20 deg C), similar heat pipes have been developed with various outer diameters (11 mm, 15 mm and 20 mm) and with various shapes (circular outer shapes, integrated saddles). Several of these heat pipes were tested during two parabolic flight campaigns, by varying the heat loads during the micro-gravity periods. This HGP heat pipe family is now being submitted to a space qualification program according to ESA standards (ESA PSS-49), both in straight and bent configuration. Within this qualification, the heat pipes are submitted to an extended test campaign including environmental (random/sinus vibration, constant acceleration) and thermal tests (thermal performance, thermal cycle, thermal soak, ageing). (authors) 9 refs.

  14. High Capacity data hiding using LSB Steganography and Encryption

    Directory of Open Access Journals (Sweden)

    Shamim Ahmed Laskar

    2013-01-01

    Full Text Available The network provides a method of communication to distribute information to the masses. With the growthof data communication over computer network, the security of information has become a major issue.Steganography and cryptography are two different data hiding techniques. Steganography hides messagesinside some other digital media. Cryptography, on the other hand obscures the content of the message. Wepropose a high capacity data embedding approach by the combination of Steganography andcryptography. In the process a message is first encrypted using transposition cipher method and then theencrypted message is embedded inside an image using LSB insertion method. The combination of these twomethods will enhance the security of the data embedded. This combinational methodology will satisfy therequirements such as capacity, security and robustness for secure data transmission over an open channel.A comparative analysis is made to demonstrate the effectiveness of the proposed method by computingMean square error (MSE and Peak Signal to Noise Ratio (PSNR. We analyzed the data hiding techniqueusing the image performance parameters like Entropy, Mean and Standard Deviation. The stego imagesare tested by transmitting them and the embedded data are successfully extracted by the receiver. The mainobjective in this paper is to provide resistance against visual and statistical attacks as well as highcapacity.

  15. High-Capacity, High-Voltage Composite Oxide Cathode Materials

    Science.gov (United States)

    Hagh, Nader M.

    2015-01-01

    This SBIR project integrates theoretical and experimental work to enable a new generation of high-capacity, high-voltage cathode materials that will lead to high-performance, robust energy storage systems. At low operating temperatures, commercially available electrode materials for lithium-ion (Li-ion) batteries do not meet energy and power requirements for NASA's planned exploration activities. NEI Corporation, in partnership with the University of California, San Diego, has developed layered composite cathode materials that increase power and energy densities at temperatures as low as 0 degC and considerably reduce the overall volume and weight of battery packs. In Phase I of the project, through innovations in the structure and morphology of composite electrode particles, the partners successfully demonstrated an energy density exceeding 1,000 Wh/kg at 4 V at room temperature. In Phase II, the team enhanced the kinetics of Li-ion transport and electronic conductivity at 0 degC. An important feature of the composite cathode is that it has at least two components that are structurally integrated. The layered material is electrochemically inactive; however, upon structural integration with a spinel material, the layered material can be electrochemically activated and deliver a large amount of energy with stable cycling.

  16. High-Capacity Spacesuit Evaporator Absorber Radiator (SEAR)

    Science.gov (United States)

    Izenson, Michael G.; Chen, Weibo; Phillips, Scott; Chepko, Ariane; Bue, Grant; Quinn, Gregory

    2015-01-01

    Future human space exploration missions will require advanced life support technology that can operate across a wide range of applications and environments. Thermal control systems for space suits and spacecraft will need to meet critical requirements for water conservation and multifunctional operation. This paper describes a Space Evaporator Absorber Radiator (SEAR) that has been designed to meet performance requirements for future life support systems. A SEAR system comprises a lithium chloride absorber radiator (LCAR) for heat rejection coupled with a space water membrane evaporator (SWME) for heat acquisition. SEAR systems provide heat pumping to minimize radiator size, thermal storage to accommodate variable environmental conditions, and water absorption to minimize use of expendables. We have built and tested a flight-like, high-capacity LCAR, demonstrated its performance in thermal vacuum tests, and explored the feasibility of an ISS demonstration test of a SEAR system. The new LCAR design provides the same cooling capability as prior LCAR prototypes while enabling over 30% more heat absorbing capacity. Studies show that it should be feasible to demonstrate SEAR operation in flight by coupling with an existing EMU on the space station.

  17. High-capacity quantum Fibonacci coding for key distribution

    Science.gov (United States)

    Simon, David S.; Lawrence, Nate; Trevino, Jacob; Dal Negro, Luca; Sergienko, Alexander V.

    2013-03-01

    Quantum cryptography and quantum key distribution (QKD) have been the most successful applications of quantum information processing, highlighting the unique capability of quantum mechanics, through the no-cloning theorem, to securely share encryption keys between two parties. Here, we present an approach to high-capacity, high-efficiency QKD by exploiting cross-disciplinary ideas from quantum information theory and the theory of light scattering of aperiodic photonic media. We propose a unique type of entangled-photon source, as well as a physical mechanism for efficiently sharing keys. The key-sharing protocol combines entanglement with the mathematical properties of a recursive sequence to allow a realization of the physical conditions necessary for implementation of the no-cloning principle for QKD, while the source produces entangled photons whose orbital angular momenta (OAM) are in a superposition of Fibonacci numbers. The source is used to implement a particular physical realization of the protocol by randomly encoding the Fibonacci sequence onto entangled OAM states, allowing secure generation of long keys from few photons. Unlike in polarization-based protocols, reference frame alignment is unnecessary, while the required experimental setup is simpler than other OAM-based protocols capable of achieving the same capacity and its complexity grows less rapidly with increasing range of OAM used.

  18. Macroreticular chelating ion-exchangers.

    Science.gov (United States)

    Hirsch, R F; E Gancher, R; Russo, F R

    1970-06-01

    Two macroreticular chelating ion-exchangers have been prepared and characterized. One contains the iminodiacetate group and the second contains the arsonate group as the ion-exchanging site. The macroreticular resins show selectivities among metal ions similar to those of the commercially available naicroreticular chelating resins. Chromatographie separations on the new resins are rapid and sharp.

  19. Modulating release of ranibizumab and aflibercept from thiolated chitosan-based hydrogels for potential treatment of ocular neovascularization.

    Science.gov (United States)

    Moreno, Miguel; Pow, Poh Yih; Tabitha, Tan Su Teng; Nirmal, Sonali; Larsson, Andreas; Radhakrishnan, Krishna; Nirmal, Jayabalan; Quah, Soo Tng; Geifman Shochat, Susana; Agrawal, Rupesh; Venkatraman, Subbu

    2017-08-01

    This paper describes the synthesis of thiolated chitosan-based hydrogels with varying degrees of crosslinking that has been utilized to modulate release kinetics of two clinically relevant FDA-approved anti-VEGF protein drugs, ranibizumab and aflibercept. These hydrogels have been fabricated into disc shaped structures for potential use as patches on ocular surface. Protein conformational changes and aggregation after loading and release was evaluated by circular dichroism (CD), steady-state tryptophan fluorescence spectroscopy, electrophoresis and size-exclusion chromatography (SEC). Finally, the capacity of both released proteins to bind to VEGF was tested by ELISA and surface plasmon resonance (SPR) technology. The study demonstrates the versatility of thiolated chitosan-based hydrogels for delivering proteins. The effect of various parameters of the hydrogel on protein release kinetics and mechanism of protein release was studied using the Korsmeyer-Peppas release model. Furthermore, we have studied the stability of released proteins in detail while comparing it with non-entrapped proteins under physiological conditions to understand the effect of formulation conditions on protein stability. The disc-shaped thiolated chitosan-based hydrogels provide a potentially useful platform to deliver ranibizumab and aflibercept for the treatments of ocular diseases such as wet AMD, DME and corneal neovascularization.

  20. Design of high-capacity fiber-optic transport systems

    Science.gov (United States)

    Liao, Zhi Ming

    2001-08-01

    We study the design of fiber-optic transport systems and the behavior of fiber amplifiers/lasers with the aim of achieving higher capacities with larger amplifier spacing. Solitons are natural candidates for transmitting short pulses for high-capacity fiber-optic networks because of its innate ability to use two of fiber's main defects, fiber dispersion and fiber nonlinearity to balance each other. In order for solitons to retain its dynamic nature, amplifiers must be placed periodically to restore powers to compensate for fiber loss. Variational analysis is used to study the long-term stability of a periodical- amplifier system. A new regime of operation is identified which allows the use of a much longer amplifier spacing. If optical fibers are the blood vessels of an optical communication system, then the optical amplifier based on erbium-doped fiber is the heart. Optical communication systems can avoid the use of costly electrical regenerators to maintain system performance by being able to optically amplify the weakened signals. The length of amplifier spacing is largely determined by the gain excursion experienced by the solitons. We propose, model, and demonstrate a distributed erbium-doped fiber amplifier which can drastically reduce the amount of gain excursion experienced by the solitons, therefore allowing a much longer amplifier spacing and superior stability. Dispersion management techniques have become extremely valuable tools in the design of fiber-optic communication systems. We have studied in depth the advantage of different arnplification schemes (lumped and distributed) for various dispersion compensation techniques. We measure the system performance through the Q factor to evaluate the added advantage of effective noise figure and smaller gain excursion. An erbium-doped fiber laser has been constructed and characterized in an effort to develop a test bed to study transmission systems. The presence of mode-partition noise in an erbium

  1. Chitosan-based hydrogel tissue scaffolds made by 3D plotting promotes osteoblast proliferation and mineralization.

    Science.gov (United States)

    Liu, I-Hsin; Chang, Shih-Hsin; Lin, Hsin-Yi

    2015-05-13

    A 3D plotting system was used to make chitosan-based tissue scaffolds with interconnected pores using pure chitosan (C) and chitosan cross-linked with pectin (CP) and genipin (CG). A freeze-dried chitosan scaffold (CF/D) was made to compare with C, to observe the effects of structural differences. The fiber size, pore size, porosity, compression strength, swelling ratio, drug release efficacy, and cumulative weight loss of the scaffolds were measured. Osteoblasts were cultured on the scaffolds and their proliferation, type I collagen production, alkaline phosphatase activity, calcium deposition, and morphology were observed. C had a lower swelling ratio, degradation, porosity and drug release efficacy and a higher compressional stiffness and cell proliferation compared to CF/D (p < 0.05). Of the 3D-plotted samples, cells on CP exhibited the highest degree of mineralization after 21 d (p < 0.05). CP also had the highest swelling ratio and fastest drug release, followed by C and CG (p < 0.05). Both CP and CG were stiffer and degraded more slowly in saline solution than C (p < 0.05). In summary, 3D-plotted scaffolds were stronger, less likely to degrade and better promoted osteoblast cell proliferation in vitro compared to the freeze-dried scaffolds. C, CP and CG were structurally similar, and the different crosslinking caused significant changes in their physical and biological performances.

  2. Nano and Microparticulate Chitosan Based System for Formulation of Carvedilol Rapid Melt Tablet

    Directory of Open Access Journals (Sweden)

    Ravindra Patil

    2015-06-01

    Full Text Available Purpose: In the present study rapid melt tablets (RMT’s of carvedilol were prepared by using ionotropic-gelated chitosan nanoparticles using a spray-drying method. Carvedilol is beta-adrenergic antagonist and its oral bioavailability is about 25-35% because of first pass metabolism. Methods: The spray-dried microparticles were formulated into RMT’s using a wet granulation process. The Formulation and optimization of carvedilol loaded RMTs using nano and microparticulate chitosan based system (NMCS was done by using 32 factorial designs. Results: Drug entrapment efficiency of about 64.9 % (w/w and loading capacity of 14.44% (w/w were achieved for the microparticles, which were ranged from 1 μm to 4 μm in diameter. Results of disintegration tests showed that the formulated RMTs could be completely dissolved within 40 seconds. Dissolution studies suggested that Carvedilol is released more slowly from tablets made using the microencapsulation process compared with tablets containing Carvedilol that is free or in the form of nanoparticles. Conclusion: Results shown that the development of new RMTs designed with crosslinked microparticle might be a rational way to overcome the unwanted taste of conventional RMTs and the side effects related to Carvedilol intrinsic characteristics. The development of Carvedilol NMCS using ludiflash as RMTs could be used as a promising approach for improving the solubility and oral bioavailability of water insoluble drug.

  3. Transglutaminase crosslinked pectin- and chitosan-based edible films: a review.

    Science.gov (United States)

    Porta, Raffaele; Mariniello, Loredana; Di Pierro, Prospero; Sorrentino, Angela; Giosafatto, Concetta Valeria L

    2011-03-01

    The production of biodegradable and edible films with desired mechanical characteristics and gas barrier properties represents one of the most advanced challenges in the field of food wrapping and coating. New edible films can serve not only to provide food with physical protection but also to reduce loss of their moisture, to restrict absorption of oxygen, to lessen migration of lipids, to improve their mechanical handling features, and as materials, to apply in direct contact with internal food to realize a multilayer food packaging. Polymers derived from natural products, like carbohydrates and proteins, offer the greatest opportunities as component of edible films since their biodegradability and environmental compatibility are assured and they can also supplement the nutritional value of specific foods. However, excessive water solubility and poor water vapor barrier properties, and often poor mechanical resistance, have their application limited until the present time. Numerous studies have been carried out to improve their properties by preparing composite and multi-component films or by physically and chemically crosslinking their natural components. In the present review we summarize the main results obtained by crosslinking with the enzyme transglutaminase different proteins contained in multi-component pectin- and chitosan-based edible films, having the aim to create environmentally-friendly "bioplastics" with mechanical and permeability properties similar to the ones exhibited by plastics of petrochemical origin.

  4. Conductivity Studies and Performance of Chitosan Based Polymer Electrolyteyte in H_2/Air Fuel Cell

    Institute of Scientific and Technical Information of China (English)

    S.R.Majid; A.K.Arof

    2007-01-01

    1 Resalts Four chitosan-based electrolyte systems chitosan-H3PO4, chitosan-H3PO4-NH4NO3, chitosan-H3PO4-NH4NO3-Al2SiO5 and chitosan-H3PO4-Al2SiO5 were studied. The samples (0.62 chitosan-0.38 H3PO4), (0.56 chitosan-0.34 H3PO4-0.10 NH4NO3), (0.557 2 chitosan-0.338 3 H3PO4-0.099 5 NH4NO3-0.005 Al2SiO5) and (0.615 chitosan-0.377 H3PO4-0.008 Al2SiO5), composition in weight fraction, exhibit the highest room temperature electrical conductivity of (5.36±1.32) × 10-5, (1.16±0.35) × 10-4, (1.82±0.10) × 10-4 an...

  5. Cationic content effects of biodegradable amphoteric chitosan-based flocculants on the flocculation properties

    Institute of Scientific and Technical Information of China (English)

    Zhen Yang; Hu Yang; Rongshi Cheng; Yabo Shang; Xin Huang; Yichun Chen; Yaobo Lu; Aimin Chen; Yuxiang Jiang; Wei Gu; Xiaozhi Qian

    2012-01-01

    A series of biodegradable amphoteric chitosan-based flocculants(3-chloro-2-hydroxypropyl trimethyl ammonium chloride(CTA)modified carboxymethyl chitosan,denoted as CMC-CTA)with different substitution degrees of CTA were prepared successfully.The content of carboxymethyl groups in each CMC-CTA sample was kept almost constant.The solubility of the various flocculants showed that,higher cationic content of flocculants caused a better solubility.The flocculation experiments using kaolin suspension as synthetic water at the laboratory scale indicated that the substitution degree of CTA was one of the key factors for the flocculation properties.With the increase of cationic content,the flocculants were demonstrated better flocculation performance and lower dosage requirement.Flocculation kinetics model of particles collisions combining zeta potential and turbidity measurements was employed to investigate the effects of the cationic content of the flocculants on the flocculation properties from the viewpoint of flocculation mechanism in detail.Furthermore,flocculation performance using raw water from Zhenjiang part of Yangtze River at the pilot scale showed the similar effects to those at the laboratory scale.

  6. Collagen/chitosan based two-compartment and bi-functional dermal scaffolds for skin regeneration

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Feng [Department of Plastic Surgery and Burns, Shenzhen Second People' s Hospital, Shenzhen 518035 (China); Wang, Mingbo [Key Laboratory of Biomedical Materials and Implants, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057 (China); She, Zhending [Key Laboratory of Biomedical Materials and Implants, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057 (China); Shenzhen Lando Biomaterials Co., Ltd., Shenzhen 518057 (China); Fan, Kunwu; Xu, Cheng [Department of Plastic Surgery and Burns, Shenzhen Second People' s Hospital, Shenzhen 518035 (China); Chu, Bin; Chen, Changsheng [Key Laboratory of Biomedical Materials and Implants, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057 (China); Shi, Shengjun, E-mail: shengjunshi@yahoo.com [The Burns Department of Zhujiang Hospital, Southern Medical University, Guangzhou 510280 (China); Tan, Rongwei, E-mail: tanrw@landobiom.com [Key Laboratory of Biomedical Materials and Implants, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057 (China); Shenzhen Lando Biomaterials Co., Ltd., Shenzhen 518057 (China)

    2015-07-01

    Inspired from the sophisticated bilayer structures of natural dermis, here, we reported collagen/chitosan based two-compartment and bi-functional dermal scaffolds. Two functions refer to mediating rapid angiogenesis based on recombinant human vascular endothelial growth factor (rhVEGF) and antibacterial from gentamicin, which were encapsulated in PLGA microspheres. The gentamicin and rhVEGF encapsulated PLGA microspheres were further combined with collagen/chitosan mixtures in low (lower layer) and high (upper layer) concentrations, and molded to generate the two-compartment and bi-functional scaffolds. Based on morphology and pore structure analyses, it was found that the scaffold has a distinct double layered porous and connective structure with PLGA microspheres encapsulated. Statistical analysis indicated that the pores in the upper layer and in the lower layer have great variations in diameter, indicative of a two-compartment structure. The release profiles of gentamicin and rhVEGF exceeded 28 and 49 days, respectively. In vitro culture of mouse fibroblasts showed that the scaffold can facilitate cell adhesion and proliferation. Moreover, the scaffold can obviously inhibit proliferation of Staphylococcus aureus and Serratia marcescens, exhibiting its unique antibacterial effect. The two-compartment and bi-functional dermal scaffolds can be a promising candidate for skin regeneration. - Highlights: • The dermal scaffold is inspired from the bilayer structures of natural dermis. • The dermal scaffold has two-compartment structures. • The dermal scaffold containing VEGF and gentamicin encapsulated PLGA microspheres • The dermal scaffold can facilitate cell adhesion and proliferation.

  7. Chitosan-Based Matrices Prepared by Gamma Irradiation for Tissue Regeneration: Structural Properties vs. Preparation Method.

    Science.gov (United States)

    Casimiro, Maria Helena; Lancastre, Joana J H; Rodrigues, Alexandra P; Gomes, Susana R; Rodrigues, Gabriela; Ferreira, Luís M

    2017-02-01

    In the last decade, new generations of biopolymer-based materials have attracted attention, aiming its application as scaffolds for tissue engineering. These engineered three-dimensional scaffolds are designed to improve or replace damaged, missing, or otherwise compromised tissues or organs. Despite the number of promising methods that can be used to generate 3D cell-instructive matrices, the innovative nature of the present work relies on the application of ionizing radiation technology to form and modify surfaces and matrices with advantage over more conventional technologies (room temperature reaction, absence of harmful initiators or solvents, high penetration through the bulk materials, etc.), and the possibility of preparation and sterilization in one single step. The current chapter summarizes the work done by the authors in the gamma radiation processing of biocompatible and biodegradable chitosan-based matrices for skin regeneration. Particular attention is given to the correlation between the different preparation conditions and the final polymeric matrices' properties. We therefore expect to demonstrate that instructive matrices produced and improved by radiation technology bring to the field of skin regenerative medicine a supplemental advantage over more conservative techniques.

  8. Cationic content effects of biodegradable amphoteric chitosan-based flocculants on the flocculation properties.

    Science.gov (United States)

    Yang, Zhen; Shang, Yabo; Huang, Xin; Chen, Yichun; Lu, Yaobo; Chen, Aimin; Jiang, Yuxiang; Gu, Wei; Qian, Xiaozhi; Yang, Hu; Cheng, Rongshi

    2012-01-01

    A series of biodegradable amphoteric chitosan-based flocculants (3-chloro-2-hydroxypropyl trimethyl ammonium chloride (CTA) modified carboxymethyl chitosan, denoted as CMC-CTA) with different substitution degrees of CTA were prepared successfully. The content of carboxymethyl groups in each CMC-CTA sample was kept almost constant. The solubility of the various flocculants showed that, higher cationic content of flocculants caused a better solubility. The flocculation experiments using kaolin suspension as synthetic water at the laboratory scale indicated that the substitution degree of CTA was one of the key factors for the flocculation properties. With the increase of cationic content, the flocculants were demonstrated better flocculation performance and lower dosage requirement. Flocculation kinetics model of particles collisions combining zeta potential and turbidity measurements was employed to investigate the effects of the cationic content of the flocculants on the flocculation properties from the viewpoint of flocculation mechanism in detail. Furthermore, flocculation performance using raw water from Zhenjiang part of Yangtze River at the pilot scale showed the similar effects to those at the laboratory scale.

  9. Gelatin/Carboxymethyl chitosan based scaffolds for dermal tissue engineering applications.

    Science.gov (United States)

    Agarwal, Tarun; Narayan, Rajan; Maji, Somnath; Behera, Shubhanath; Kulanthaivel, Senthilguru; Maiti, Tapas Kumar; Banerjee, Indranil; Pal, Kunal; Giri, Supratim

    2016-12-01

    The present study delineates the preparation, characterization and application of gelatin-carboxymethyl chitosan scaffolds for dermal tissue engineering. The effect of carboxymethyl chitosan and gelatin ratio was evaluated for variations in their physico-chemical-biological characteristics and drug release kinetics. The scaffolds were prepared by freeze drying method and characterized by SEM and FTIR. The study revealed that the scaffolds were highly porous with pore size ranging between 90 and 170μm, had high water uptake (400-1100%) and water retention capacity (>300%). The collagenase mediated degradation of the scaffolds was dependent on the amount of gelatin present in the formulation. A slight yet significant variation in their biological characteristics was also observed. All the formulations supported adhesion, spreading, growth and proliferation of 3T3 mouse fibroblasts. The cells seeded on the scaffolds also demonstrated expression of collagen type I, HIF1α and VEGF, providing a clue regarding their growth and proliferation along with potential to support angiogenesis during wound healing. In addition, the scaffolds showed sustained ampicillin and bovine serum albumin release, confirming their suitability as a therapeutic delivery vehicle during wound healing. All together, the results suggest that gelatin-carboxymethyl chitosan based scaffolds could be a suitable matrix for dermal tissue engineering applications. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Synthesis of chitosan based nanoparticles and their in vitro evaluation against phytopathogenic fungi.

    Science.gov (United States)

    Saharan, Vinod; Mehrotra, Akanksha; Khatik, Rajesh; Rawal, Pokhar; Sharma, S S; Pal, Ajay

    2013-11-01

    The main aim of present study was to prepare chitosan, chitosan-saponin and Cu-chitosan nanoparticles to evaluate their in vitro antifungal activities. Various nanoparticles were prepared using ionic gelation method by interaction of chitosan, sodium tripolyphosphate, saponin and Cu ions. Their particle size, polydispersity index, zeta potential and structures were confirmed by DLS, FTIR, TEM and SEM. The antifungal properties of nanoparticles against phytopathogenic fungi namely Alternaria alternata, Macrophomina phaseolina and Rhizoctonia solani were investigated at various concentrations ranging from 0.001 to 0.1%. Among the various formulations of nanoparticles, Cu-chitosan nanoparticles were found most effective at 0.1% concentration and showed 89.5, 63.0 and 60.1% growth inhibition of A. alternata, M. phaseolina and R. solani, respectively in in vitro model. At the same concentration, Cu-chitosan nanoparticles also showed maximum of 87.4% inhibition rate of spore germination of A. alternata. Chitosan nanoparticles showed the maximum growth inhibitory effects (87.6%) on in vitro mycelial growth of M. phaseolina at 0.1% concentration. From our study it is evident that chitosan based nanoparticles particularly chitosan and Cu-chitosan nanoparticles have tremendous potential for further field screening towards crop protection.

  11. A rational approach towards the design of chitosan-based nanoparticles obtained by ionotropic gelation.

    Science.gov (United States)

    Kleine-Brueggeney, H; Zorzi, G K; Fecker, T; El Gueddari, N E; Moerschbacher, B M; Goycoolea, F M

    2015-11-01

    Chitosan is a linear aminopolysaccharide that has been widely used for the formation of chitosan-based nanoparticles by ionic gelation with sodium tripolyphosphate (TPP). Often, the experimental design used to obtain these systems does not take into consideration important variables, such as the degree of acetylation (DA) and the molecular weight (Mw) of chitosan. In this work, we studied the formation of chitosan-TPP nanoparticles with chitosan samples of varying DA and Mw (DA0 ∼ 0-47% and Mw ∼ 2.5-282 kDa). We addressed the influence the degree of space occupancy and the degree of crosslinking on the physical properties of chitosan-TPP nanoparticles. Nanoparticles that comprised chitosan of DA ∼ 0-21.7% behaved differently than those made of chitosan of DA ∼ 34.7-47%. We attributed these differences to the polymer conformation and chain flexibility of the distinct chitosans in solution. Moreover, chitosan of high Mw were found to have a stronger preference for incorporating into the formed nanoparticles than do low-Mw ones, as determined by SEC-HPLC. These results open new perspectives to understand the formation of chitosan nanoparticles by the ionic gelation technique.

  12. Physical Characteristics of Chitosan Based Film Modified With Silica and Polyethylene Glycol

    Directory of Open Access Journals (Sweden)

    F. Widhi Mahatmanti

    2014-07-01

    Full Text Available Recently, development of film materials is focused on finding the films with high chemical and physical stabilities. Organic based material such as chitosan produces films with low physical stability, and hence addition of inorganic materials necessary. In this research, the effect of silica and polyethylene glycol (PEG addition on the properties of chitosan based films has been investigated. Precursors used to produce films included chitosan with the deacetylation degree of 83% and sodium silicate solution as the silica source. A simple synthesis in a one-pot process was carried out by mixing 1%(w of chitosan solution in 2%(v/v acetate acid and sodium silicate solution (27% SiO2 in various composition ratios and casting the solution on a glass dish. The tensile strength and percentage of elongation decrease with increasing the silica content. The tensile strength tends to decline with addition of PEG, but the elongation percentage of the film increases. Hydrophilicity of the film decreases with the addition of silica and increases with the addition of PEG. The addition of silica and PEG does not change significantly the morphology of the film and functional groups indicating the domination of physical interaction among active sites in the film components.

  13. Comparative Study of One-Step Cross-Linked Electrospun Chitosan-Based Membranes

    Directory of Open Access Journals (Sweden)

    Yanet E. Aguirre-Chagala

    2017-01-01

    Full Text Available Chitosan membranes are widely applied for tissue engineering; however, a major drawback is their low resistance in aqueous phases and therefore the structure collapses impeding their long-term use. Although there is extensive research, because of chitosan’s importance as a biomaterial, studies involving chitosan-based membranes are still needed. Herein, a detailed investigation of diverse chemical routes to cross-link fibers in situ by electrospinning process is described. In case of using genipin as cross-linker, a close relationship with the content and the mean diameter values is reported, suggesting a crucial effect over the design of nanostructures. Also, the physical resistance is enhanced for the combination of two types of methods, such as chemical and physical methods. Cross-linked fibers upon exposure to long wave ultraviolet A (UVA light change their morphology, but not their chemical composition. When they are incubated in aqueous phase for 70 days, they show an extensive improvement of their macrostructural integrity which makes them attractive candidates for tissue engineering application. As a result, the thermal properties of these materials reveal less crystallinity and higher temperature of degradation.

  14. Antitumor and antimetastasis effects of macerating solutions from an injectable chitosan-based hydrogel on hepatocarcinoma.

    Science.gov (United States)

    Wang, Hui; Song, Fulai; Chen, Quan; Hu, Rui; Jiang, Zhiwen; Yang, Yan; Han, Baoqin

    2015-12-01

    In our previous studies, injectable chitosan-based hydrogel (CH) was prepared and its application in surgery removal of tumor was studied. In this study, the antitumor and antimetastasis effects of the macerating solutions from CH were investigated. Our in vitro results showed that macerating solutions from CH significantly increased the proliferation of human normal liver L02 cells. In contrast, macerating solutions from CH showed significant inhibitory effects on the growth of human hepatoma Bel-7402 cells. In a mouse H22 tumor model, intraperitoneal injection of macerating solutions from CH decreased tumor growth and prevented tumor diffusion. Tumor weight was decreased dramatically in mice treated with macerating solutions from CH. The thymus index and spleen index were significantly increased by treatment with macerating solutions from CH. Administration of macerating solutions from CH also remarkably increased serum levels of TNF-α, IL-2, IFN-γ, and decreased serum VEGF content as compared with the control group treated with saline. The antimetastasis studies showed that the number of pulmonary nodules, pulmonary metastases index, and lymph nodes index were significantly decreased in experimental groups treated with macerating solutions from CH. This study provided more supporting data for the potential clinical application of CH after surgical removal of tumor.

  15. Production of chitosan-based non-woven membranes using the electrospinning process

    Science.gov (United States)

    Pakravan Lonbani, Mehdi

    Chitosan is a modified natural polymer mainly produced from chitin, one of the most abundant organic materials in the world. Highly porous chitosan mats present the specific physicochemical properties of the base material and also benefit from the physical characteristics of nanoporous membranes. Electrospinning is a novel technique developed long time ago and revisited recently that can generate polymeric fibers with nanometric size. The ultimate purpose of this work is to fabricate microporous non-woven chitosan membranes for wound healing dressings and heavy metal ion removal from drinking water. In this dissertation, two approaches have been utilized to prepare chitosan-based nanofibers; blending and co-axial electrospinning of chitosan solution with a readily electrospinnable solution, i.e. an aqueous solution of polyethylene oxide (PEO). Consequently, understanding the phase behavior and miscibility of aqueous acidic solutions of chitosan and PEO and their blends is of crucial importance, as any phase separation occurring during the electrospinning process greatly changes the morphology and physico-mechanical properties of the final products. First we employed the rheological approach on a well-known aqueous PEO solution to develop the experimental protocol. By comparing these critical points with that obtained from other experimental techniques, we showed that rheological measurements can sensitively detect early stages of phase separation. Subsequently the method was applied to 50 wt% aqueous acetic acid solutions of PEO, chitosan and their blends at different ratios. These solutions showed a lower critical solution temperature (LCST) phase diagram that is attributed to the existence of hydrogen bonds between active groups on chitosan and PEO backbone and the solvent. Critical decomposition temperatures for binodal and spinodal points were estimated from isochronal temperature sweep experiments. The obtained binodal temperatures confirmed that chitosan

  16. Nano and microparticulate chitosan-based systems for antiviral topical delivery.

    Science.gov (United States)

    Calderón, L; Harris, R; Cordoba-Diaz, M; Elorza, M; Elorza, B; Lenoir, J; Adriaens, E; Remon, J P; Heras, A; Cordoba-Diaz, D

    2013-01-23

    Acyclovir (ACV) is one of the drugs of choice for the treatment of epidermal, ocular or systemic herpetic infections. Nevertheless, its trans-mucosal limited absorption and the scarce contact time of the formulation with the mucosal surface - especially in the ocular mucosa - constitute a big limitation of the antiviral efficiency. The most effective way to solve these problems is to increase the quantity and the residence time of the drug over the ocular surface. In order to cope with all these requirements, micro-particles (MPs) and nano-particles (NPs) containing ACV have been developed using cross-linked chitosan with tripolyphosphate (TPP) due to the biocompatibility, bio-adhesion ability and the potential power as penetration enhancer of this polymer. Particles were characterized by Fourier-transformed infrared (FTIR) spectroscopy, X-ray diffraction, SEM, Zeta potential and particle size. Encapsulation efficiency and release profiles in flow through diffusion cells were also determined. Besides the Slug Mucosal Irritation (SMI) assay has been applied as an alternative to the Draize test to predict the mucosal irritation of the selected formulation. FTIR and X-ray results suggested an electrostatic interaction ACV-Chitosan that made ACV be molecularly dispersed within the polymer matrix. Encapsulation efficiency was 75% for MP and 16% for NP. Release profiles in flow through diffusion cells were also determined. From the diffusion profiles, it was found that the amounts of ACV effectively diffused in 24h were 30, 430 and 80 μg for the ACV solution, MP and NP respectively. SMI results showed that chitosan-based particles induced moderate irritation and mild tissue damage, what supposes that ACV-MP constitute a promising alternative for further development of an antiviral formulation.

  17. Genipin cross-linked electrospun chitosan-based nanofibrous mat as tissue engineering scaffold

    Directory of Open Access Journals (Sweden)

    Esmaeil Mirzaei

    2014-04-01

    Full Text Available   Objective(s: To improve water stability of electrospun chitosan/ Polyethylene oxide (PEO nanofibers, genipin, a biocompatible and nontoxic agent, was used to crosslink chitosan based nanofibers.   Materials and Methods: Different amounts of genipin were added to the chitosan/PEO solutions, chitosan/PEO weight ratio 90/10 in 80 % acetic acid, and the solutions were then electrospun to form nanofibers. The spun nanofibers were exposed to water vapor to complete crosslinking. The nanofibrous membranes were subjected to detailed analysis by scanning electron microscopy (SEM, Fourier transform infrared-attenuated total reflection (FTIR-ATR spectroscopy, swelling test, MTT cytotoxicity, and cell attachment. Results: SEM images of electrospun mats showed that genipin-crosslinked nanofibers retained their fibrous structure after immerging in PBS (pH=7.4 for 24 hours, while the uncrosslinked samples lost their fibrous structure, indicating the water stability of genipin-crosslinked nanofibers. The genipin-crosslinked mats also showed no significant change in swelling ratio in comparison with uncrosslinked ones. FTIR-ATR spectrum of uncrosslinked and genipin-crosslinked chitosan nanofibers revealed the reaction between genipin and amino groups of chitosan. Cytotoxicity of genipin-crosslinked nanofibers was examined by MTT assay on human fibroblast cells in the presence of nanofibers extraction media. The genipin-crosslinked nanofibers did not show any toxic effects on fibroblast cells at the lowest and moderate amount of genipin. The fibroblast cells also showed a good adhesion on genipin-crosslinked nanofibers. Conclusion: This electrospun matrix would be used for biomedical applications such as wound dressing and scaffold for tissue engineering without the concern of toxicity.

  18. Towards the development of multifunctional chitosan-based iron oxide nanoparticles: Optimization and modelling of doxorubicin release.

    Science.gov (United States)

    Soares, Paula I P; Sousa, Ana Isabel; Ferreira, Isabel M M; Novo, Carlos M M; Borges, João Paulo

    2016-11-20

    In the present work composite nanoparticles with a magnetic core and a chitosan-based shell were produced as drug delivery systems for doxorubicin (DOX). The results show that composite nanoparticles with a hydrodynamic diameter within the nanometric range are able to encapsulate more DOX than polymeric nanoparticles alone corresponding also to a higher drug release. Moreover the synthesis method of the iron oxide nanoparticles influences the total amount of DOX released and a high content of iron oxide nanoparticles inhibits DOX release. The modelling of the experimental results revealed a release mechanism dominated by Fickian diffusion.

  19. The scientific basis for chelation: animal studies and lead chelation.

    Science.gov (United States)

    Smith, Donald; Strupp, Barbara J

    2013-12-01

    This presentation summarizes several of the rodent and non-human studies that we have conducted to help inform the efficacy and clinical utility of succimer (meso-2,3-dimercaptosuccincinic acid) chelation treatment. We address the following questions: (1) What is the extent of body lead, and in particular brain lead reduction with chelation, and do reductions in blood lead accurately reflect reductions in brain lead? (2) Can succimer treatment alleviate the neurobehavioral impacts of lead poisoning? And (3) does succimer treatment, in the absence of lead poisoning, produce neurobehavioral deficits? Results from our studies in juvenile primates show that succimer treatment is effective at accelerating the elimination of lead from the body, but chelation was only marginally better than the complete cessation of lead exposure alone. Studies in lead-exposed adult primates treated with a single 19-day course of succimer showed that chelation did not measurably reduce brain lead levels compared to vehicle-treated controls. A follow-up study in rodents that underwent one or two 21-day courses of succimer treatment showed that chelation significantly reduced brain lead levels, and that two courses of succimer were significantly more efficacious at reducing brain lead levels than one. In both the primate and rodent studies, reductions in blood lead levels were a relatively poor predictor of reductions in brain lead levels. Our studies in rodents demonstrated that it is possible for succimer chelation therapy to alleviate certain types of lead-induced behavioral/cognitive dysfunction, suggesting that if a succimer treatment protocol that produced a substantial reduction of brain lead levels could be identified for humans, a functional benefit might be derived. Finally, we also found that succimer treatment produced lasting adverse neurobehavioral effects when administered to non-lead-exposed rodents, highlighting the potential risks of administering succimer or other metal-chelating

  20. Overview of current chelation practices

    Directory of Open Access Journals (Sweden)

    Y. Aydinok

    2011-12-01

    Full Text Available Deferoxamine (DFO is reference standard therapy for transfusional iron overload since the 1980s. Although it is a highly effective iron chelator, the compliance problem to subcutaneous administration of DFO remains as the major problem. The oral chelator Deferiprone (DFP has no marketing licence in North America, however, it has been licensed in India since 1994 and the European Union (EU granted marketing approval for DFP in 1999, specifically for patients with thalassemia major when DFO is inadequate, intolerable or unacceptable. There are still limited data available on the use of DFP in children between 6 and 10 years of age, and no data on DFP use in children under 6 years of age. Subsequently the oral chelator Deferasirox (DFX was approved by FDA and EMA for the treatment of patients with transfusional iron overload -older than 2 years of age- as first line therapy, in 2005 and 2006 respectively. The primary objective of iron chelation is to maintain body iron at safe levels at all times but once iron is accumulated, the objective of iron chelation is to reduce tissue iron to safe levels which is a slow process. The chelation regimen, dose and frequency of administration, of the chelator(s are mainly determined based on body iron burden, presence of myocardial iron and the transfusional iron loading rate. A proper monitoring of chelation is of importance for measuring the response rate to a particular regimen and providing dose adjustments to enhance chelation efficacy and to avoid toxicity. Efficacy of a chelation regimen may exhibit individual variability resulting from factors such as absorbtion and metabolism of the chelator. Tolerability and compliance are also individual variables effecting the response to chelation. Understanding of advantages and limitations of chelators, accurately determining chelation needs of patients with iron overload and designing individualized chelation regimens with less toxicity but optimum efficacy

  1. A chitosan based, laser activated thin film surgical adhesive, 'SurgiLux': preparation and demonstration.

    Science.gov (United States)

    Foster, L John R; Karsten, Elizabeth

    2012-10-23

    cross-linking and through irradiation using a comparatively low-powered (120 mW) infrared laser instead of UV light. Chitosan films have a natural but weak adhesive attraction to collagen (~3 KPa), laser activation of the chitosan based SurgiLux films emphasizes the strength of this adhesion through polymer chain interactions as a consequence of transient thermal expansion.(5) Without this 'activation' process, SurgiLux films are readily removed.(6-9) SurgiLux has been tested both in vitro and in vivo on a variety of tissues including nerve, intestine, dura mater and cornea. In all cases it demonstrated good biocompatibility and negligible thermal damage as a consequence of irradiation.(6-10).

  2. Chelation for Coronary Heart Disease

    Science.gov (United States)

    ... V W X Y Z Chelation for Coronary Heart Disease Share: © AHA Coronary heart disease is a leading cause of death among both ... health approach . The use of disodium EDTA for heart disease has not been approved by the U.S. Food ...

  3. Control of Listeria monocytogenes on cold-smoked salmon using chitosan-based antimicrobial coatings and films.

    Science.gov (United States)

    Jiang, Zheng; Neetoo, Hudaa; Chen, Haiqiang

    2011-01-01

    The relatively high incidence of Listeria monocytogenes in ready-to-eat (RTE) products such as cold-smoked salmon is of serious concern. The objective of this study was to evaluate the efficacy of chitosan-based edible coatings and films incorporating 3 generally recognized as safe (GRAS) antimicrobials, sodium lactate (SL), sodium diacetate (SD), and potassium sorbate (PS), against L. monocytogenes on cold-smoked salmon. Salmon samples were surface-inoculated with a 5-strain cocktail of Listeria monocytogenes to a final concentration of 4.4 log CFU/cm(2) and then either coated with chitosan solutions or wrapped with chitosan films with or without the 3 antimicrobials. The samples were then vacuum packaged and stored at 4 °C for 30 d. The chitosan coatings with or without the antimicrobials consistently showed higher efficacy against L. monocytogenes than chitosan films having the same compositions. The most effective film treatments, chitosan films containing 1.2% SL/0.25% SD or 2.4% SL, achieved ≥ 1.3 log reductions of L. monocytogenes during the 30 d of refrigerated storage, while the most effective coating treatments, chitosan coatings containing 1.2% SL/0.25% SD or 0.15% PS/0.125% SD, achieved ≥ 2.8 log reductions. Practical Application: This study shows that chitosan-based edible coatings and films hold promise and can potentially assist fishery industries in their efforts to control L. monocytogenes.

  4. Thermosensitive chitosan-based hydrogel as a topical ocular drug delivery system of latanoprost for glaucoma treatment.

    Science.gov (United States)

    Cheng, Yung-Hsin; Tsai, Tung-Hu; Jhan, Yong-Yu; Chiu, Allen Wen-hsiang; Tsai, Kun-Ling; Chien, Chian-Shiu; Chiou, Shih-Hwa; Liu, Catherine Jui-lin

    2016-06-25

    Ocular hypertension is a major risk factor for the development and progression of glaucoma. Frequent and long-term application of latanoprost often causes undesirable local side effects, which are a major cause of therapeutic failure due to loss of persistence in using this glaucoma medical therapy. In the present study, we developed a thermosensitive chitosan-based hydrogel as a topical eye drop formulation for the sustained release of latanoprost to control ocular hypertension. The developed formulation without preservatives may improve compliance and possibly even efficacy. The results of this study support its biocompatibility and sustained-release profile both in vitro and in vivo. After topical application of latanoprost-loaded hydrogel, triamcinolone acetonide-induced elevated intraocular pressure was significantly decreased within 7 days and remained at a normal level for the following 21 days in rabbit eyes. This newly developed chitosan-based hydrogel may provide a non-invasive alternative to traditional anti-glaucoma eye drops for glaucoma treatment.

  5. Iron Chelation and Multiple Sclerosis

    Directory of Open Access Journals (Sweden)

    Kelsey J. Weigel

    2014-01-01

    Full Text Available Histochemical and MRI studies have demonstrated that MS (multiple sclerosis patients have abnormal deposition of iron in both gray and white matter structures. Data is emerging indicating that this iron could partake in pathogenesis by various mechanisms, e.g., promoting the production of reactive oxygen species and enhancing the production of proinflammatory cytokines. Iron chelation therapy could be a viable strategy to block iron-related pathological events or it can confer cellular protection by stabilizing hypoxia inducible factor 1α, a transcription factor that normally responds to hypoxic conditions. Iron chelation has been shown to protect against disease progression and/or limit iron accumulation in some neurological disorders or their experimental models. Data from studies that administered a chelator to animals with experimental autoimmune encephalomyelitis, a model of MS, support the rationale for examining this treatment approach in MS. Preliminary clinical studies have been performed in MS patients using deferoxamine. Although some side effects were observed, the large majority of patients were able to tolerate the arduous administration regimen, i.e., 6–8 h of subcutaneous infusion, and all side effects resolved upon discontinuation of treatment. Importantly, these preliminary studies did not identify a disqualifying event for this experimental approach. More recently developed chelators, deferasirox and deferiprone, are more desirable for possible use in MS given their oral administration, and importantly, deferiprone can cross the blood–brain barrier. However, experiences from other conditions indicate that the potential for adverse events during chelation therapy necessitates close patient monitoring and a carefully considered administration regimen.

  6. Frequency Assignment for Joint Aerial Layer Network High-Capacity Backbone

    Science.gov (United States)

    2017-08-11

    ARL-TR-8093•AUG 2017 US Army Research Laboratory Frequency Assignment for Joint Aerial Layer Network High-Capacity Backbone by Peng Wang and Brian...2017 US Army Research Laboratory Frequency Assignment for Joint Aerial Layer Network High-Capacity Backbone by Peng Wang and Brian Henz Computational...Rev. 8/98)    Prescribed by ANSI Std. Z39.18 August 2017 Technical Report Frequency Assignment for Joint Aerial Layer Network High-Capacity Backbone

  7. Mesoporous Silicon-Based Anodes for High Capacity, High Performance Li-ion Batteries Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A new high capacity anode composite based on mesoporous silicon is proposed. By virtue of a structure that resembles a pseudo one-dimensional phase, the active...

  8. Mesoporous Silicon-Based Anodes for High Capacity, High Performance Li-ion Batteries Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A new high capacity anode composite based on mesoporous silicon is proposed. By virtue of a structure that resembles a pseudo one-dimensional phase, the active anode...

  9. Multi-core Fibers in Submarine Networks for High-Capacity Undersea Transmission Systems

    DEFF Research Database (Denmark)

    Nooruzzaman, Md; Morioka, Toshio

    2017-01-01

    Application of multi-core fibers in undersea networks for high-capacity submarine transmission systems is studied. It is demonstrated how different architectures of submerged branching unit affect network component counts in long-haul undersea transmission systems......Application of multi-core fibers in undersea networks for high-capacity submarine transmission systems is studied. It is demonstrated how different architectures of submerged branching unit affect network component counts in long-haul undersea transmission systems...

  10. Luminescent lanthanide chelates and methods of use

    Science.gov (United States)

    Selvin, Paul R.; Hearst, John

    1997-01-01

    The invention provides lanthanide chelates capable of intense luminescence. The celates comprise a lanthanide chelator covalently joined to a coumarin-like or quinolone-like sensitizer. Exemplary sensitzers include 2- or 4-quinolones, 2- or 4-coumarins, or derivatives thereof e.g. carbostyril 124 (7-amino-4-methyl-2-quinolone), coumarin 120 (7-amino-4-methyl-2-coumarin), coumarin 124 (7-amino-4-(trifluoromethyl)-2-coumarin), aminomethyltrimethylpsoralen, etc. The chelates form high affinity complexes with lanthanides, such as terbium or europium, through chelator groups, such as DTPA. The chelates may be coupled to a wide variety of compounds to create specific labels, probes, diagnostic and/or therapeutic reagents, etc. The chelates find particular use in resonance energy transfer between chelate-lanthanide complexes and another luminescent agent, often a fluorescent non-metal based resonance energy acceptor. The methods provide useful information about the structure, conformation, relative location and/or interactions of macromolecules.

  11. Chelators for investigating zinc metalloneurochemistry.

    Science.gov (United States)

    Radford, Robert J; Lippard, Stephen J

    2013-04-01

    The physiology and pathology of mobile zinc signaling has become an important topic in metalloneurochemistry. To study the action of mobile zinc effectively, specialized tools are required that probe the temporal and positional changes of zinc ions within live tissue and cells. In the present article we describe the design and implementation of selective zinc chelators as antagonists to interrogate the function of mobile zinc, with an emphasis on the pools of vesicular zinc in the terminals of hippocampal mossy fiber buttons.

  12. Combination therapies in iron chelation

    Directory of Open Access Journals (Sweden)

    Raffaella Origa

    2014-12-01

    Full Text Available The availability of oral iron chelators and new non-invasive methods for early detection and treatment of iron overload, have significantly improved the life expectancy and quality of life of patients with b thalassemia major. However, monotherapy is not effective in all patients for a variety of reasons. We analyzed the most relevant reports recently published on alternating or combined chelation therapies in thalassemia major with special attention to safety aspects and to their effects in terms of reduction of iron overload in different organs, improvement of complications, and survival. When adverse effects, such as gastrointestinal upset with deferasirox or infusional site reactions with deferoxamine are not tolerable and organ iron is in an acceptable range, alternating use of two chelators (drugs taken sequentially on different days, but not taken on the same day together may be a winning choice. The association deferiprone and deferoxamine should be the first choice in case of heart failure and when dangerously high levels of cardiac iron exist. Further research regarding the safety and efficacy of the most appealing combination treatment, deferiprone and deferasirox, is needed before recommendations for routine clinical practice can be made.

  13. Effect of freezing temperature in thermally induced phase separation method in hydroxyapatite/chitosan-based bone scaffold biomaterial

    Science.gov (United States)

    Albab, Muh Fadhil; Yuwono, Akhmad Herman; Sofyan, Nofrijon; Ramahdita, Ghiska

    2017-02-01

    In the current study, hydroxyapatite (HA)/chitosan-based bone scaffold has been fabricated using Thermally Induced Phase Separation (TIPS) method under freezing temperature variation of -20, -30, -40 and -80 °C. The samples with weight percent ratio of 70% HA and 30% chitosan were homogeneously mixed and subsequently dissolved in 2% acetic acid. The synthesized samples were further characterized using Fourier transform infrared (FTIR), compressive test and scanning electron microscope (SEM). The investigation results showed that low freezing temperature reduced the pore size and increased the compressive strength of the scaffold. In the freezing temperature of -20 °C, the pore size was 133.93 µm with the compressive strength of 5.9 KPa, while for -80 °C, the pore size declined to 60.55 µm with the compressive strength 29.8 KPa. Considering the obtained characteristics, HA/chitosan obtained in this work has potential to be applied as a bone scaffold.

  14. Chitosan-based delivery systems for diclofenac delivery: preparation and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Dreve, Simina; Kacso, Irina; Bratu, Ioan; Indrea, Emil, E-mail: simina.dreve@itim-cj.r [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath, 400293 Cluj-Napoca (Romania)

    2009-08-01

    The preparation and characterization of novel materials for drug delivery has rapidly gained importance in development of innovative medicine. The paper concerns the uses of chitosan as an excipient in oral formulations and as a drug delivery vehicle for burnt painful injuries. The use of chitosan (CTS) as base in polyelectrolyte complex systems, to prepare liquid release systems as hydrogels and solid release systems as sponges is presented. In this paper the preparation of CTS hydrogels and sponges carrying diclofenac (DCF), as anti-inflammatory drug is reported. The immobilization of DCF in CTS is done by mixing the CTS hydrogel with the anti-inflammatory drug solutions. The concentration of anti-inflammatory drug in the CTS hydrogel generating the sponges was of 57 mg/l, 72 mg/l and 114 mg/l. The CTS sponges with anti-inflammatory drugs were prepared by freeze-drying at -610{sup 0}C and 0,09 atm. The characterization of the hydrogels and sponges was done by infrared spectra (FTIR) and ultraviolet-visible spectroscopy (UV-VIS). The results indicated the formation of CTS-DCF intermediates. The DCF molecules are forming temporary chelates in CTS hydrogels and sponges and they are compatible with skin or some of biological fluids with satisfactory results.

  15. High-capacity electrode materials for electrochemical energy storage: Role of nanoscale effects

    Indian Academy of Sciences (India)

    Jagjit Nanda; Surendra K Martha; Ramki Kalyanaraman

    2015-06-01

    This review summarizes the current state-of-the art electrode materials used for high-capacity lithium-ion-based batteries and their significant role towards revolutionizing the electrochemical energy storage landscape in the area of consumer electronics, transportation and grid storage application. We discuss the role of nanoscale effects on the electrochemical performance of high-capacity battery electrode materials. Decrease in the particle size of the primary electrode materials from micron to nanometre size improves the ionic and electronic diffusion rates significantly. Nanometre-thick solid electrolyte (such as lithium phosphorous oxynitride) and oxides (such as Al2O3, ZnO, TiO2 etc.) material coatings also improve the interfacial stability and rate capability of a number of battery chemistries. We elucidate these effects in terms of different high-capacity battery chemistries based on intercalation and conversion mechanism.

  16. Role of chelates in treatment of cancer

    Directory of Open Access Journals (Sweden)

    Tripathi Laxmi

    2007-01-01

    Full Text Available Chelates are used in cancer as cytotoxic agent, as radioactive agent in imaging studies and in radioimmunotherapy. Various chelates based on ruthenium, copper, zinc, organocobalt, gold, platinum, palladium, cobalt, nickel and iron are reported as cytotoxic agent. Monoclonal antibodies labeled with radioactive metals such as yttrium-90, indium-111 and iodine-131 are used in radioimmunotherapy. This review is an attempt to compile the use of chelates as cytotoxic drugs and in radioimmunotherapy.

  17. High-Capacity Photorefractive Neural Network Implementing a Kohonen Topological Map

    Science.gov (United States)

    Frauel, Yann; Pauliat, Gilles; Villing, André; Roosen, Gérald

    2001-10-01

    We designed and built a high-capacity neural network based on volume holographic interconnections in a photorefractive crystal. We used this system to implement a Kohonen topological map. We describe and justify our optical setup and present some experimental results of self-organization in the learning database.

  18. High-powered conveyor systems: long distance, downhill, open-pit, and high capacity conveyors

    Energy Technology Data Exchange (ETDEWEB)

    Pelzer, H.K.

    1978-01-01

    Paper indicates the conditions under which belt conveyors are superior to other forms of transport, the limitations of these conveyors. Long distance, downhill, open-pit and high capacity conveyor installations are described, including a 60-mile long conveyor in the Sahara.

  19. Beliefs about chelation among thalassemia patients

    Directory of Open Access Journals (Sweden)

    Trachtenberg Felicia L

    2012-12-01

    Full Text Available Abstract Background Understanding patients’ views about medication is crucial to maximize adherence. Thalassemia is a congenital blood disorder requiring chronic blood transfusions and daily iron chelation therapy. Methods The Beliefs in Medicine Questionnaire (BMQ was used to assess beliefs in chelation in thalassemia patients from North America and London in the Thalassemia Longitudinal Cohort (TLC of the Thalassemia Clinical Research Network (TCRN. Chelation adherence was based on patient report of doses administered out of those prescribed in the last four weeks. Results Of 371 patients (ages 5-58y, mean 24y, 93% were transfused and 92% receiving chelation (26% deferoxamine (DFO; a slow subcutaneous infusion via portable pump, 63% oral, 11% combination. Patients expressed high “necessity” for transfusion (96%, DFO chelation (92% and oral chelation (89%, with lower “concern” about treatment (48%, 39%, 19% respectively. Concern about oral chelation was significantly lower than that of DFO (p Conclusions Despite their requirement for multimodal therapy, thalassemia patients have positive views about medicine, more so than in other disease populations. Patients may benefit from education about the tolerability of chelation and strategies to effectively cope with side effects, both of which might be beneficial in lowering body iron burden. Clinicaltrials.gov identifier NCT00661804

  20. Metal ions, Alzheimer's disease and chelation therapy.

    Science.gov (United States)

    Budimir, Ana

    2011-03-01

    In the last few years, various studies have been providing evidence that metal ions are critically involved in the pathogenesis of major neurological diseases (Alzheimer, Parkinson). Metal ion chelators have been suggested as potential therapies for diseases involving metal ion imbalance. Neurodegeneration is an excellent target for exploiting the metal chelator approach to therapeutics. In contrast to the direct chelation approach in metal ion overload disorders, in neurodegeneration the goal seems to be a better and subtle modulation of metal ion homeostasis, aimed at restoring ionic balance. Thus, moderate chelators able to coordinate deleterious metals without disturbing metal homeostasis are needed. To date, several chelating agents have been investigated for their potential to treat neurodegeneration, and a series of 8-hydroxyquinoline analogues showed the greatest potential for the treatment of neurodegenerative diseases.

  1. Effect of composition and properties of chitosan-based edible coatings on microflora of meat and meat products

    Directory of Open Access Journals (Sweden)

    Denis A. Baranenko

    2013-06-01

    Full Text Available Background. Analysis of the properties of various chitosan grades has resulted in a working hypothesis that chitosan can be used as part of protective film-forming coatings for meat and meat products. The aim of this study was the research of composition, properties and antibacterial activity of chitosan-based coatings used for cold storage of meat and meat products. Material and methods. Protective coatings, developed by the authors, based on organic acids and chi- tosan with food gelatin, or distarch glycerol, or wheat fiber, or sodium alginate, or guar gum have been used as research material. The coatings were applied on the surfaces of retail cuts of veal and rabbit meat, boiled sausages, smoked sausages and smoked-boiled pork brisket. Antimicrobial activity of the solutions was evaluated in vitro. Microbial indicators of the mixtures were also determined by the zone of inhibition assay. Dynamic viscosity, the activation energy of viscous flow and pH of mixtures of fluids were measured. During the storage of meat and meat products total viable count of microorganisms was determined. Results. Polymer solutions of chitosan:starch and chitosan:gelatin are technologicaly compatible, solutions of chitosan:fiber are two-phase colloidal systems. Coatings did not alter the samples inherent flavour char- acteristics. All coatings reduced total viable count of microorganisms compared to control samples without coating. Composition based on 2% solution of chitosan and organic acids and 2% gelatin solution in a ratio of 1:1 has the strongest bacteriostatic effect for meat and meat products. Including potassium sorbate and sodium benzoate in gelatin and chitosan solutions mixture for protective coating was not found reasonable, because of their lower bacteriostatic effect. Combined application of vacuum and protective coatings pro- vided the strongest suppressing effect on microflora in all samples. Conclusions.The chitosan-based edible coatings

  2. Importance of iron chelation therapy

    Directory of Open Access Journals (Sweden)

    A. Varoğlu

    2011-12-01

    Full Text Available It is necessary to remember that today patients have different options of chelation treatment, as desferrioxamine, deferiprone and deferasirox are available. However, a patient has to be compliant with treatments. They have always to remember that too much iron causes different complications and could be a barrier for a definitive cure from thalassemia. 由于出现了去铁胺、去铁酮和去铁斯若等药物,病人现在可以选择不同的螯合治疗方式。 然而,病人必须适应这几种治疗方式。 他们必须时刻记住太多的铁元素会引发多种并发症,并对地中海贫血的彻底治疗造成阻碍。

  3. Chitosan-based Schiff base-metal complexes (Mn, Cu, Co) as heterogeneous, new catalysts for the -isophorone oxidation

    Indian Academy of Sciences (India)

    C S Thatte; M V Rathnam; A C Pise

    2014-05-01

    A new chitosan-based Schiff base was prepared and complexed with manganese, cobalt and copper. These Schiff base metal complexes were used as heterogeneous catalysts for the air oxidation of -isophorone to ketoisophorone. The obtained complexes were characterized by means of FT-IR, 1HNMR spectroscopy, elemental analysis, powder X-ray diffraction, field emission gun scanning electron microscopy, electron spin resonance spectroscopy, ICP-AES and solubility tests. Thermal properties were also investigated using thermal gravimetric analysis. Data obtained by thermal analysis revealed that these complexes showed good thermal stability. The conversion and selectivity of -isophorone to ketoisophorone for each prepared catalyst was studied using a batch reactor and gas chromatography for product identification and quantification. The results were compared against the homogeneous bis-salicylaldehyde ethylenedi-imine-Mn catalyst. The use of methanol, acetone, methyl isobutyl ketone and -hexane as solvent and its effect on conversion and selectivity was also investigated. Acetone was found to be a promising solvent for the -isophorone oxidation. The role of triethyl amine and acetyl acetone in the oxidation reaction has also been investigated.

  4. Evaluation of a novel chitosan-based flocculant with high flocculation performance, low toxicity and good floc properties.

    Science.gov (United States)

    Yang, Zhen; Li, Haijiang; Yan, Han; Wu, Hu; Yang, Hu; Wu, Qian; Li, Haibo; Li, Aimin; Cheng, Rongshi

    2014-07-15

    In this work, a novel chitosan-based flocculant, carboxymethyl chitosan-graft-poly[(2-methacryloyloxyethyl) trimethyl ammonium chloride] (CMC-g-PDMC), was designed and prepared successfully. Flocculation performance of CMC-g-PDMC was systematically evaluated using kaolin suspension, humic acid (HA) solution and kaolin-HA mixed suspension as synthetic wastewater under acidic, neutral and alkaline conditions, respectively. The experimental results demonstrated that CMC-g-PDMC exhibited lower optimal dosage, higher contaminant removal efficiency, wider applicable pH range, lower effluent toxicity and better floc properties for handling and disposal, in comparison with polyaluminum chloride. The high flocculation performance of CMC-g-PDMC was ascribed to two structural advantages of improved both positive charges and molecular weight. In addition, flocs characteristics including flocs formation, breakage, regrowth and fractal structure, were studied by an in-situ light scattering system during the flocculation process. Detailed analysis clearly illuminated the differences and relationship among floc size, fractal dimension and floc strength. Based on analysis of floc properties in combination with zeta potential measurements, flocculation mechanisms in different synthetic wastewater at various pHs were deeply discussed: charge neutralization or patching played the key role under different conditions, and the relationship between flocculation mechanisms and floc properties has been built. The effective and environment-friendly flocculant bear significant application potentials in water treatment fields.

  5. Effect of Oregano and Marjoram Essential Oils on the Physical and Antimicrobial Properties of Chitosan Based Systems

    Directory of Open Access Journals (Sweden)

    Jana Sedlaříková

    2017-01-01

    Full Text Available The effect of two essential oils (EOs, from Origanum vulgare and Origanum majorana, their structural properties, and concentration on physical and antimicrobial characteristics of chitosan based solutions as well as films was investigated. Results showed that significantly different behaviour was induced by variation in the compositions of given essential oils. Film-forming solutions (FFS containing oregano oil comprised considerably greater particles in comparison with the marjoram samples. Similarly, structural changes were confirmed by SEM analysis of chitosan films modified with the EOs; the smaller particles of the marjoram oil demonstrated better compatibility with chitosan matrix. However, chitosan films enriched with the oregano oil showed significantly superior antimicrobial activity compared to the marjoram. The dissimilar effects of the two EOs were also observed by water vapour pressure (WVP measurement; increasing the amount of oregano oil triggered a drop in the WVP of the prepared films, whereas the marjoram oil had a negligible impact in this respect. These results suggest that the structural features of active substances in the EOs play a crucial role in determining the final properties of FFS and biofilm systems.

  6. Probing the nanostructure, interfacial interaction, and dynamics of chitosan-based nanoparticles by multiscale solid-state NMR.

    Science.gov (United States)

    Wang, Fenfen; Zhang, Rongchun; Wu, Qiang; Chen, Tiehong; Sun, Pingchuan; Shi, An-Chang

    2014-12-10

    Chitosan-based nanoparticles (NPs) are widely used in drug and gene delivery, therapy, and medical imaging, but a molecular-level understanding of the internal morphology and nanostructure size, interface, and dynamics, which is critical for building fundamental knowledge for the precise design and efficient biological application of the NPs, remains a great challenge. Therefore, the availability of a multiscale (0.1-100 nm) and nondestructive analytical technique for examining such NPs is of great importance for nanotechnology. Herein, we present a new multiscale solid-state NMR approach to achieve this goal for the investigation of chitosan-poly(N-3-acrylamidophenylboronic acid) NPs. First, a recently developed (13)C multiple cross-polarization magic-angle spinning (MAS) method enabled fast quantitative determination of the NPs' composition and detection of conformational changes in chitosan. Then, using an improved (1)H spin-diffusion method with (13)C detection and theoretical simulations, the internal morphology and nanostructure size were quantitatively determined. The interfacial coordinated interaction between chitosan and phenylboronic acid was revealed by one-dimensional MAS and two-dimensional (2D) triple-quantum MAS (11)B NMR. Finally, dynamic-editing (13)C MAS and 2D (13)C-(1)H wide-line separation experiments provided details regarding the componential dynamics of the NPs in the solid and swollen states. On the basis of these NMR results, a model of the unique nanostructure, interfacial interaction, and componential dynamics of the NPs was proposed.

  7. Preservation Mechanism of Chitosan-Based Coating with Cinnamon Oil for Fruits Storage Based on Sensor Data.

    Science.gov (United States)

    Xing, Yage; Xu, Qinglian; Yang, Simon X; Chen, Cunkun; Tang, Yong; Sun, Shumin; Zhang, Liang; Che, Zhenming; Li, Xihong

    2016-07-18

    The chitosan-based coating with antimicrobial agent has been developed recently to control the decay of fruits. However, its fresh keeping and antimicrobial mechanism is still not very clear. The preservation mechanism of chitosan coating with cinnamon oil for fruits storage is investigated in this paper. Results in the atomic force microscopy sensor images show that many micropores exist in the chitosan coating film. The roughness of coating film is affected by the concentration of chitosan. The antifungal activity of cinnamon oil should be mainly due to its main consistent trans-cinnamaldehyde, which is proportional to the trans-cinnamaldehyde concentration and improves with increasing the attachment time of oil. The exosmosis ratios of Penicillium citrinum and Aspergillus flavus could be enhanced by increasing the concentration of cinnamon oil. Morphological observation indicates that, compared to the normal cell, the wizened mycelium of A. flavus is observed around the inhibition zone, and the growth of spores is also inhibited. Moreover, the analysis of gas sensors indicate that the chitosan-oil coating could decrease the level of O₂ and increase the level of CO₂ in the package of cherry fruits, which also control the fruit decay. These results indicate that its preservation mechanism might be partly due to the micropores structure of coating film as a barrier for gas and a carrier for oil, and partly due to the activity of cinnamon oil on the cell disruption.

  8. Preservation Mechanism of Chitosan-Based Coating with Cinnamon Oil for Fruits Storage Based on Sensor Data

    Science.gov (United States)

    Xing, Yage; Xu, Qinglian; Yang, Simon X.; Chen, Cunkun; Tang, Yong; Sun, Shumin; Zhang, Liang; Che, Zhenming; Li, Xihong

    2016-01-01

    The chitosan-based coating with antimicrobial agent has been developed recently to control the decay of fruits. However, its fresh keeping and antimicrobial mechanism is still not very clear. The preservation mechanism of chitosan coating with cinnamon oil for fruits storage is investigated in this paper. Results in the atomic force microscopy sensor images show that many micropores exist in the chitosan coating film. The roughness of coating film is affected by the concentration of chitosan. The antifungal activity of cinnamon oil should be mainly due to its main consistent trans-cinnamaldehyde, which is proportional to the trans-cinnamaldehyde concentration and improves with increasing the attachment time of oil. The exosmosis ratios of Penicillium citrinum and Aspergillus flavus could be enhanced by increasing the concentration of cinnamon oil. Morphological observation indicates that, compared to the normal cell, the wizened mycelium of A. flavus is observed around the inhibition zone, and the growth of spores is also inhibited. Moreover, the analysis of gas sensors indicate that the chitosan-oil coating could decrease the level of O2 and increase the level of CO2 in the package of cherry fruits, which also control the fruit decay. These results indicate that its preservation mechanism might be partly due to the micropores structure of coating film as a barrier for gas and a carrier for oil, and partly due to the activity of cinnamon oil on the cell disruption. PMID:27438841

  9. Estimation of Parameters Obtained by Electrochemical Impedance Spectroscopy on Systems Containing High Capacities

    Directory of Open Access Journals (Sweden)

    Mirjana Rajčić Vujasinović

    2009-09-01

    Full Text Available Electrochemical systems with high capacities demand devices for electrochemical impedance spectroscopy (EIS with ultra-low frequencies (in order of mHz, that are almost impossible to accomplish with analogue techniques, but this becomes possible by using a computer technique and accompanying digital equipment. Recently, an original software and hardware for electrochemical measurements, intended for electrochemical systems exhibiting high capacities, such as supercapacitors, has been developed. One of the included methods is EIS. In this paper, the method of calculation of circuit parameters from an EIS curve is described. The results of testing on a physical model of an electrochemical system, constructed of known elements (including a 1.6 F capacitor in a defined arrangement, proved the validity of the system and the method.

  10. High-capacity quantum key distribution using Chebyshev-map values corresponding to Lucas numbers coding

    Science.gov (United States)

    Lai, Hong; Orgun, Mehmet A.; Pieprzyk, Josef; Li, Jing; Luo, Mingxing; Xiao, Jinghua; Xiao, Fuyuan

    2016-08-01

    We propose an approach that achieves high-capacity quantum key distribution using Chebyshev-map values corresponding to Lucas numbers coding. In particular, we encode a key with the Chebyshev-map values corresponding to Lucas numbers and then use k-Chebyshev maps to achieve consecutive and flexible key expansion and apply the pre-shared classical information between Alice and Bob and fountain codes for privacy amplification to solve the security of the exchange of classical information via the classical channel. Consequently, our high-capacity protocol does not have the limitations imposed by orbital angular momentum and down-conversion bandwidths, and it meets the requirements for longer distances and lower error rates simultaneously.

  11. High-Capacity Hydrogen-Based Green-Energy Storage Solutions For The Grid Balancing

    Science.gov (United States)

    D'Errico, F.; Screnci, A.

    One of the current main challenges in green-power storage and smart grids is the lack of effective solutions for accommodating the unbalance between renewable energy sources, that offer intermittent electricity supply, and a variable electricity demand. Energy management systems have to be foreseen for the near future, while they still represent a major challenge. Integrating intermittent renewable energy sources, by safe and cost-effective energy storage systems based on solid state hydrogen is today achievable thanks to recently some technology breakthroughs. Optimized solid storage method made of magnesium-based hydrides guarantees a very rapid absorption and desorption kinetics. Coupled with electrolyzer technology, high-capacity storage of green-hydrogen is therefore practicable. Besides these aspects, magnesium has been emerging as environmentally friend energy storage method to sustain integration, monitoring and control of large quantity of GWh from high capacity renewable generation in the EU.

  12. High-capacity three-party quantum secret sharing with superdense coding

    Institute of Scientific and Technical Information of China (English)

    Gu Bin; Li Chuan-Qi; Xu Fei; Chen Yu-Lin

    2009-01-01

    This paper presents a scheme for high-capacity three-party quantum secret sharing with quantum superdense coding, following some ideas in the work by Liu et al (2002 Phys. Rev. A 65 022304) and the quantum secret sharing scheme by Deng et al (2008 Phys. Left. A 372 1957). Instead of using two sets of nonorthogonal states, the boss Alice needs only to prepare a sequence of Einstein-Podolsky-Rosen pairs in d-dimension. The two agents Bob and Charlie encode their information with dense coding unitary operations, and security is checked by inserting decoy photons. The scheme has a high capacity and intrinsic efficiency as each pair can carry 21bd bits of information, and almost all the pairs can be used for carrying useful information.

  13. Radiation and temperature effects on electronic components investigated under the CSTI high capacity power project

    Science.gov (United States)

    Schwarze, Gene E.; Niedra, Janis M.; Frasca, Albert J.; Wieserman, William R.

    1993-01-01

    The effects of nuclear radiation and high temperature environments must be fully known and understood for the electronic components and materials used in both the Power Conditioning and Control subsystem and the reactor Instrumentation and Control subsystem of future high capacity nuclear space power systems. This knowledge is required by the designer of these subsystems in order to develop highly reliable, long-life power systems for future NASA missions. A review and summary of the experimental results obtained for the electronic components and materials investigated under the power management element of the Civilian Space Technology Initiative (CSTI) high capacity power project are presented: (1) neutron, gamma ray, and temperature effects on power semiconductor switches, (2) temperature and frequency effects on soft magnetic materials; and (3) temperature effects on rare earth permanent magnets.

  14. High-capacity quantum key distribution using Chebyshev-map values corresponding to Lucas numbers coding

    Science.gov (United States)

    Lai, Hong; Orgun, Mehmet A.; Pieprzyk, Josef; Li, Jing; Luo, Mingxing; Xiao, Jinghua; Xiao, Fuyuan

    2016-11-01

    We propose an approach that achieves high-capacity quantum key distribution using Chebyshev-map values corresponding to Lucas numbers coding. In particular, we encode a key with the Chebyshev-map values corresponding to Lucas numbers and then use k-Chebyshev maps to achieve consecutive and flexible key expansion and apply the pre-shared classical information between Alice and Bob and fountain codes for privacy amplification to solve the security of the exchange of classical information via the classical channel. Consequently, our high-capacity protocol does not have the limitations imposed by orbital angular momentum and down-conversion bandwidths, and it meets the requirements for longer distances and lower error rates simultaneously.

  15. Estimation of parameters obtained by electrochemical impedance spectroscopy on systems containing high capacities.

    Science.gov (United States)

    Stević, Zoran; Vujasinović, Mirjana Rajčić; Radunović, Milan

    2009-01-01

    Electrochemical systems with high capacities demand devices for electrochemical impedance spectroscopy (EIS) with ultra-low frequencies (in order of mHz), that are almost impossible to accomplish with analogue techniques, but this becomes possible by using a computer technique and accompanying digital equipment. Recently, an original software and hardware for electrochemical measurements, intended for electrochemical systems exhibiting high capacities, such as supercapacitors, has been developed. One of the included methods is EIS. In this paper, the method of calculation of circuit parameters from an EIS curve is described. The results of testing on a physical model of an electrochemical system, constructed of known elements (including a 1.6 F capacitor) in a defined arrangement, proved the validity of the system and the method.

  16. Estimation of Parameters Obtained by Electrochemical Impedance Spectroscopy on Systems Containing High Capacities

    Science.gov (United States)

    Stević, Zoran; Vujasinović, Mirjana Rajčić; Radunović, Milan

    2009-01-01

    Electrochemical systems with high capacities demand devices for electrochemical impedance spectroscopy (EIS) with ultra-low frequencies (in order of mHz), that are almost impossible to accomplish with analogue techniques, but this becomes possible by using a computer technique and accompanying digital equipment. Recently, an original software and hardware for electrochemical measurements, intended for electrochemical systems exhibiting high capacities, such as supercapacitors, has been developed. One of the included methods is EIS. In this paper, the method of calculation of circuit parameters from an EIS curve is described. The results of testing on a physical model of an electrochemical system, constructed of known elements (including a 1.6 F capacitor) in a defined arrangement, proved the validity of the system and the method. PMID:22400000

  17. Overview of space power electronic's technology under the CSTI High Capacity Power Program

    Science.gov (United States)

    Schwarze, Gene E.

    The Civilian Space Technology Initiative (CSTI) is a NASA Program targeted at the development of specific technologies in the areas of transportation, operations and science. Each of these three areas consists of major elements and one of the operation's elements is the High Capacity Power element. The goal of this element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA initiatives. The High Capacity Power element is broken down into several subelements that includes energy conversion in the areas of the free piston Stirling power converter and thermoelectrics, thermal management, power management, system diagnostics, and environmental compatibility and system's lifetime. A recent overview of the CSTI High capacity Power element and a description of each of the program's subelements is given by Winter (1989). The goals of the Power Management subelement are twofold. The first is to develop, test, and demonstrate high temperature, radiation-resistant power and control components and circuits that will be needed in the Power Conditioning, Control and Transmission (PCCT) subsystem of a space nuclear power system. The results obtained under this goal will also be applicable to the instrumentation and control subsystem of a space nuclear reactor. These components and circuits must perform reliably for lifetimes of 7-10 years. The second goal is to develop analytical models for use in computer simulations of candidate PCCT subsystems. Circuits which will be required for a specific PCCT subsystem will be designed and built to demonstrate their performance and, also, to validate the analytical models and simulations. The tasks under the Power Management subelement will now be described in terms of objectives, approach and present status of work.

  18. Topology Management Algorithms for Large Scale Aerial High Capacity Directional Networks

    Science.gov (United States)

    2016-11-01

    Introduction of classes of topology management algo- rithms and example implementations of each • Performance evaluation of the algorithms in 2 example relevant...Topology Management Algorithms for Large-Scale Aerial High Capacity Directional Networks Joy Wang, Thomas Shake, Patricia Deutsch, Andrea Coyle, Bow...airborne backbone network is large- scale topology management of directional links in a dynamic environment. In this paper, we present several

  19. Overview of space power electronic's technology under the CSTI High Capacity Power Program

    Science.gov (United States)

    Schwarze, Gene E.

    1994-01-01

    The Civilian Space Technology Initiative (CSTI) is a NASA Program targeted at the development of specific technologies in the areas of transportation, operations and science. Each of these three areas consists of major elements and one of the operation's elements is the High Capacity Power element. The goal of this element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA initiatives. The High Capacity Power element is broken down into several subelements that includes energy conversion in the areas of the free piston Stirling power converter and thermoelectrics, thermal management, power management, system diagnostics, and environmental compatibility and system's lifetime. A recent overview of the CSTI High capacity Power element and a description of each of the program's subelements is given by Winter (1989). The goals of the Power Management subelement are twofold. The first is to develop, test, and demonstrate high temperature, radiation-resistant power and control components and circuits that will be needed in the Power Conditioning, Control and Transmission (PCCT) subsystem of a space nuclear power system. The results obtained under this goal will also be applicable to the instrumentation and control subsystem of a space nuclear reactor. These components and circuits must perform reliably for lifetimes of 7-10 years. The second goal is to develop analytical models for use in computer simulations of candidate PCCT subsystems. Circuits which will be required for a specific PCCT subsystem will be designed and built to demonstrate their performance and, also, to validate the analytical models and simulations. The tasks under the Power Management subelement will now be described in terms of objectives, approach and present status of work.

  20. Silicon oxide based high capacity anode materials for lithium ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Deng, Haixia; Han, Yongbong; Masarapu, Charan; Anguchamy, Yogesh Kumar; Lopez, Herman A.; Kumar, Sujeet

    2017-03-21

    Silicon oxide based materials, including composites with various electrical conductive compositions, are formulated into desirable anodes. The anodes can be effectively combined into lithium ion batteries with high capacity cathode materials. In some formulations, supplemental lithium can be used to stabilize cycling as well as to reduce effects of first cycle irreversible capacity loss. Batteries are described with surprisingly good cycling properties with good specific capacities with respect to both cathode active weights and anode active weights.

  1. Robo-line storage: Low latency, high capacity storage systems over geographically distributed networks

    Science.gov (United States)

    Katz, Randy H.; Anderson, Thomas E.; Ousterhout, John K.; Patterson, David A.

    1991-01-01

    Rapid advances in high performance computing are making possible more complete and accurate computer-based modeling of complex physical phenomena, such as weather front interactions, dynamics of chemical reactions, numerical aerodynamic analysis of airframes, and ocean-land-atmosphere interactions. Many of these 'grand challenge' applications are as demanding of the underlying storage system, in terms of their capacity and bandwidth requirements, as they are on the computational power of the processor. A global view of the Earth's ocean chlorophyll and land vegetation requires over 2 terabytes of raw satellite image data. In this paper, we describe our planned research program in high capacity, high bandwidth storage systems. The project has four overall goals. First, we will examine new methods for high capacity storage systems, made possible by low cost, small form factor magnetic and optical tape systems. Second, access to the storage system will be low latency and high bandwidth. To achieve this, we must interleave data transfer at all levels of the storage system, including devices, controllers, servers, and communications links. Latency will be reduced by extensive caching throughout the storage hierarchy. Third, we will provide effective management of a storage hierarchy, extending the techniques already developed for the Log Structured File System. Finally, we will construct a protototype high capacity file server, suitable for use on the National Research and Education Network (NREN). Such research must be a Cornerstone of any coherent program in high performance computing and communications.

  2. Questions and Answers on Unapproved Chelation Products

    Science.gov (United States)

    ... of the marketing scheme to convince consumers to purchase unapproved OTC chelation products. These test kits are ... feeds Follow FDA on Twitter Follow FDA on Facebook View FDA videos on YouTube View FDA photos ...

  3. SYNTHESIS AND APPLICATION OF IMINOCARBOXYLIC CHELATING FIBERS

    Institute of Scientific and Technical Information of China (English)

    LiHangqiu; ZhouShaoji

    1997-01-01

    In this paper,fibrous chelating exchangers with-N(CH2COOH)2 group have been prepared for the first time by a weakly basic anion exchange fiber (aminated fiber)as the starting materials.The fibers were quite effective for the adsorption of heavy metal ion such as Cu2+.In addition,IR spectrum of the structure of fibers confirms that it is feasible to prepare iminocarboxylic chelating fiber through direct carboxylation reaction.

  4. High capacity image steganography method based on framelet and compressive sensing

    Science.gov (United States)

    Xiao, Moyan; He, Zhibiao

    2015-12-01

    To improve the capacity and imperceptibility of image steganography, a novel high capacity and imperceptibility image steganography method based on a combination of framelet and compressive sensing (CS) is put forward. Firstly, SVD (Singular Value Decomposition) transform to measurement values obtained by compressive sensing technique to the secret data. Then the singular values in turn embed into the low frequency coarse subbands of framelet transform to the blocks of the cover image which is divided into non-overlapping blocks. Finally, use inverse framelet transforms and combine to obtain the stego image. The experimental results show that the proposed steganography method has a good performance in hiding capacity, security and imperceptibility.

  5. Development and Testing of a High Capacity Plasma Chemical Reactor in the Ukraine

    Energy Technology Data Exchange (ETDEWEB)

    Reilly, Raymond W.

    2012-07-30

    This project, Development and Testing of a High Capacity Plasma Chemical Reactor in the Ukraine was established at the Kharkiv Institute of Physics and Technology (KIPT). The associated CRADA was established with Campbell Applied Physics (CAP) located in El Dorado Hills, California. This project extends an earlier project involving both CAP and KIPT conducted under a separate CRADA. The initial project developed the basic Plasma Chemical Reactor (PCR) for generation of ozone gas. This project built upon the technology developed in the first project, greatly enhancing the output of the PCR while also improving reliability and system control.

  6. Efficient fabrication of high-capacity immobilized metal ion affinity chromatographic media: The role of the dextran-grafting process and its manipulation.

    Science.gov (United States)

    Zhao, Lan; Zhang, Jingfei; Huang, Yongdong; Li, Qiang; Zhang, Rongyue; Zhu, Kai; Suo, Jia; Su, Zhiguo; Zhang, Zhigang; Ma, Guanghui

    2016-03-01

    Novel high-capacity Ni(2+) immobilized metal ion affinity chromatographic media were prepared through the dextran-grafting process. Dextran was grafted to an allyl-activated agarose-based matrix followed by functionalization for the immobilized metal ion affinity chromatographic media. With elaborate regulation of the allylation degree, dextran was completely or partly grafted to agarose microspheres, namely, completely dextran-grafted agarose microspheres and partly dextran-grafted ones, respectively. Confocal laser scanning microscope results demonstrated that a good adjustment of dextran-grafting degree was achieved, and dextran was distributed uniformly in whole completely dextran-grafted microspheres, while just distributed around the outside of the partly dextran-grafted ones. Flow hydrodynamic properties were improved greatly after the dextran-grafting process, and the flow velocity increased by about 30% compared with that of a commercial chromatographic medium (Ni Sepharose FF). A significant improvement of protein binding performance was also achieved by the dextran-grafting process, and partly dextran-grafted Ni(2+) chelating medium had a maximum binding capacity for His-tagged lactate dehydrogenase about 2.5 times higher than that of Ni Sepharose FF. The results indicated that this novel chromatographic medium is promising for applications in high-efficiency and large-scale protein purification.

  7. Control of Salmonella on fresh chicken breasts by κ-carrageenan/chitosan-based coatings containing allyl isothiocyanate or deodorized Oriental mustard extract plus EDTA.

    Science.gov (United States)

    Olaimat, Amin N; Holley, Richard A

    2015-06-01

    Control of Salmonella in poultry is a public health concern as salmonellosis is one of the most common foodborne diseases worldwide. This study aimed to screen the ability of 5 Salmonella serovars to degrade the mustard glucosinolate, sinigrin (by bacterial myrosinase) in Mueller-Hinton broth at 25 °C for 21 d and to reduce Salmonella on fresh chicken breasts by developing an edible 0.2% (w/v) κ-carrageenan/2% (w/v) chitosan-based coating containing Oriental mustard extract, allyl isothiocyanate (AITC), EDTA or their combinations. Individual Salmonella serovars degraded 50.2%-55.9% of the sinigrin present in 21 d. κ-Carrageenan/chitosan-based coatings containing 250 mg Oriental mustard extract/g or 50 μl AITC/g reduced the numbers of Salmonella on chicken breasts 2.3 log10 CFU/g at 21 d at 4 °C. However, when either mustard extract or AITC was combined with 15 mg/g EDTA in κ-carrageenan/chitosan-based coatings, Salmonella numbers were reduced 2.3 log10 CFU/g at 5 d and 3.0 log10 CFU/g at 21 d. Moreover, these treatments reduced numbers of lactic acid bacteria and aerobic bacteria by 2.5-3.3 log10 CFU/g at 21 d. κ-Carrageenan/chitosan coatings containing either 50 μl AITC/g or 250 mg Oriental mustard extract/g plus 15 mg EDTA/g have the potential to reduce Salmonella on raw chicken.

  8. High capacity embedding with indexed data recovery using adjunctive numerical relations in multimedia signal covers

    Science.gov (United States)

    Collins, James C.; Agaian, Sos S.

    2013-05-01

    We introduce a technique for covertly embedding data throughout an audio file using redundant number system decomposition across non-standard digital bit-lines. This bit-line implementation integrates an index recoverable embedded algorithm with an extended bit level representation that achieves a high capacity data channel within an audio multimedia file. It will be shown this new steganography method has minimal aural distortive affects while preserving both first and second order cover statistics, making it less susceptible to most steganalysis attacks. Our research approach involves reviewing the common numerical methods used in common binary-based algorithms. We then describe basic concepts and challenges when attempting to implement complex embedding algorithms that are based on redundant number systems. Finally, we introduce a novel class of numerical based multiple bit-line decomposition systems, which we define as Adjunctive Numerical Representations. The system is primarily described using basic PCM techniques in uncompressed audio files however extended applications for alternate multimedia is addressed. This new embedding system will not only provide the statistical stability required for effective steganography but will also give us an improvement in the embedding capacity in this class of multimedia carrier files. This novelty of our approach is demonstrated by an ability to embed high capacity covert data while simultaneously providing a means for rapid, indexed data recovery.

  9. Charge Modulation in Graphitic Carbon Nitride as a Switchable Approach to High-Capacity Hydrogen Storage.

    Science.gov (United States)

    Tan, Xin; Kou, Liangzhi; Tahini, Hassan A; Smith, Sean C

    2015-11-01

    Electrical charging of graphitic carbon nitride nanosheets (g-C4 N3 and g-C3 N4 ) is proposed as a strategy for high-capacity and electrocatalytically switchable hydrogen storage. Using first-principle calculations, we found that the adsorption energy of H2 molecules on graphitic carbon nitride nanosheets is dramatically enhanced by injecting extra electrons into the adsorbent. At full hydrogen coverage, the negatively charged graphitic carbon nitride achieves storage capacities up to 6-7 wt %. In contrast to other hydrogen storage approaches, the storage/release occurs spontaneously once extra electrons are introduced or removed, and these processes can be simply controlled by switching on/off the charging voltage. Therefore, this approach promises both facile reversibility and tunable kinetics without the need of specific catalysts. Importantly, g-C4 N3 has good electrical conductivity and high electron mobility, which can be a very good candidate for electron injection/release. These predictions may prove to be instrumental in searching for a new class of high-capacity hydrogen storage materials.

  10. Programmatic status of NASA's CSTI high capacity power Stirling space power converter program

    Science.gov (United States)

    Dudenhoefer, James E.

    1990-01-01

    An overview is presented of the NASA Lewis Research Center Free-Piston Stirling Space Power Converter Technology Development Program. This work is being conducted under NASA's Civil Space Technology Initiative (CSTI). The goal of the CSTI High Capacity Power element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA space initiatives. Efforts are focused upon increasing system thermal and electric energy conversion efficiency at least fivefold over current SP-100 technology, and on achieving systems that are compatible with space nuclear reactors. The status of test activities with the Space Power Research Engine (SPRE) is discussed. Design deficiencies are gradually being corrected and the power converter is now outputting 11.5 kWe at a temperature ratio of 2 (design output is 12.5 kWe). Detail designs were completed for the 1050 K Component Test Power Converter (CTPC). The success of these and future designs is dependent upon supporting research and technology efforts including heat pipes, gas bearings, superalloy joining technologies and high efficiency alternators. An update of progress in these technologies is provided.

  11. E- and W-band high-capacity hybrid fiber-wireless link

    DEFF Research Database (Denmark)

    Vegas Olmos, Juan José; Pang, Xiaodan; Tafur Monroy, Idelfonso

    2014-01-01

    In this paper we summarize the work conducted in our group in the area of E- and W-band optical high-capacity fiber-wireless links. We present performance evaluations of E- and W-band mm-wave signal generation using photonic frequency upconversion employing both VCSELs and ECLs, along with transm......In this paper we summarize the work conducted in our group in the area of E- and W-band optical high-capacity fiber-wireless links. We present performance evaluations of E- and W-band mm-wave signal generation using photonic frequency upconversion employing both VCSELs and ECLs, along...... with transmission over different type of optical fibers and for a number of values for the wireless link distance. Hybrid wireless-optical links can be composed of mature and resilient technology available off-the-shelf, and provide functionalities that can add value to optical access networks, specifically...... in mobile backhaul/fronthaul applications, dense distributed antenna systems and fiber-over-radio scenarios....

  12. Review on anionic redox for high-capacity lithium- and sodium-ion batteries

    Science.gov (United States)

    Zhao, Chenglong; Wang, Qidi; Lu, Yaxiang; Hu, Yong-Sheng; Li, Baohua; Chen, Liquan

    2017-05-01

    Rechargeable batteries, especially lithium-ion batteries, are now widely used as power sources for portable electronics and electric vehicles, but material innovations are still needed to satisfy the increasing demand for larger energy density. Recently, lithium- and sodium-rich electrode materials, including the A2MO3-family layered compounds (A  =  Li, Na; M  =  Mn4+, Ru4+, etc), have been extensively studied as potential high-capacity electrode materials for a cumulative cationic and anionic redox activity. Negatively charged oxide ions can potentially donate electrons to compensate for the absence of oxidable transition metals as a redox center to further increase the reversible capacity. Understanding and controlling the state-of-the-art anionic redox processes is pivotal for the design of advanced energy materials, highlighted in rechargeable batteries. Hence, experimental and theoretical approaches have been developed to consecutively study the diverting processes, states, and structures involved. In this review, we attempt to present a literature overview and provide insight into the reaction mechanism with respect to the anionic redox processes, proposing some opinions as target oriented. It is hoped that, through this discussion, the search for anionic redox electrode materials with high-capacity rechargeable batteries can be advanced, and practical applications realized as soon as possible.

  13. High capacity fiber optic sensor networks using hybrid multiplexing techniques and their applications

    Science.gov (United States)

    Sun, Qizhen; Li, Xiaolei; Zhang, Manliang; Liu, Qi; Liu, Hai; Liu, Deming

    2013-12-01

    Fiber optic sensor network is the development trend of fiber senor technologies and industries. In this paper, I will discuss recent research progress on high capacity fiber sensor networks with hybrid multiplexing techniques and their applications in the fields of security monitoring, environment monitoring, Smart eHome, etc. Firstly, I will present the architecture of hybrid multiplexing sensor passive optical network (HSPON), and the key technologies for integrated access and intelligent management of massive fiber sensor units. Two typical hybrid WDM/TDM fiber sensor networks for perimeter intrusion monitor and cultural relics security are introduced. Secondly, we propose the concept of "Microstructure-Optical X Domin Refecltor (M-OXDR)" for fiber sensor network expansion. By fabricating smart micro-structures with the ability of multidimensional encoded and low insertion loss along the fiber, the fiber sensor network of simple structure and huge capacity more than one thousand could be achieved. Assisted by the WDM/TDM and WDM/FDM decoding methods respectively, we built the verification systems for long-haul and real-time temperature sensing. Finally, I will show the high capacity and flexible fiber sensor network with IPv6 protocol based hybrid fiber/wireless access. By developing the fiber optic sensor with embedded IPv6 protocol conversion module and IPv6 router, huge amounts of fiber optic sensor nodes can be uniquely addressed. Meanwhile, various sensing information could be integrated and accessed to the Next Generation Internet.

  14. Crack-resistant polyimide coating for high-capacity battery anodes

    Science.gov (United States)

    Li, Yingshun; Wang, Shuo; Lee, Pui-Kit; He, Jieqing; Yu, Denis Y. W.

    2017-10-01

    Electrode cracking is a serious problem that hinders the application of many next-generation high-capacity anode materials for lithium-ion batteries. Even though nano-sizing the material can reduce fracturing of individual particles, capacity fading is still observed due to large volume change and loss of contact in the electrode during lithium insertion and extraction. In this study, we design a crack-resistant high-modulus polyimide coating with high compressive strength which can hold multiple particles together during charge and discharge to maintain contact. The effectiveness of the coating is demonstrated on tin dioxide, a high-capacity large-volume-change material that undergoes both alloy and conversion reactions. The polyimide coating improves capacity retention of SnO2 from 80% to 100% after 80 cycles at 250 mA g-1. Stable capacity of 585 mAh g-1 can be obtained even at 500 mA g-1 after 300 cycles. Scanning electron microscopy and in-situ dilatometry confirm that electrode cracking is suppressed and thickness change is reduced with the coating. In addition, the chemically-stable polyimide film can separate the surface from direct contact with electrolyte, improving coulombic efficiency to ∼100%. We expect the novel strategy of suppressing electrode degradation with a crack-resistant coating can also be used for other alloy and conversion-based anodes.

  15. Construction of new biopolymer (chitosan)-based pincer-type Pd(II) complex and its catalytic application in Suzuki cross coupling reactions

    Science.gov (United States)

    Baran, Talat; Menteş, Ayfer

    2017-04-01

    In this paper we described the fabrication, characterization and application of a new biopolymer (chitosan)-based pincer-type Pd(II) catalyst in Suzuki cross coupling reactions using a non-toxic, cheap, eco-friendly and practical method. The catalytic activity tests showed remarkable product yields as well as TON (19800) and TOF (330000) values with a small catalyst loading. In addition, the catalyst indicated good recyclability in the Suzuki C-C reaction. This biopolymer supported catalyst can be used with various catalyst systems due to its unique properties, such as being inert, green in nature, low cost and chemically durable.

  16. Screening of chelating ligands to enhance mercury accumulation from historically mercury-contaminated soils for phytoextraction.

    Science.gov (United States)

    Wang, Jianxu; Xia, Jicheng; Feng, Xinbin

    2017-01-15

    Screening of optimal chelating ligands which not only have high capacities to enhance plant uptake of mercury (Hg) from soil but also can decrease bioavailable Hg concentration in soil is necessary to establish a viable chemically-assisted phytoextraction. Therefore, Brassica juncea was exposed to historically Hg-contaminated soil (total Hg, 90 mg kg(-1)) to investigate the efficiency of seven chelating agents [ammonium thiosulphate, sodium thiosulphate, ammonium sulfate, ammonium chloride, sodium nitrate, ethylenediaminetetraacetic acid (EDTA), and sodium sulfite] at enhancing Hg phytoextraction; the leaching of bioavailable Hg caused by these chelating agents was also investigated. The Hg concentration in control (treated with double-distilled water) plant tissues was below 1 mg kg(-1). The remarkably higher Hg concentration was found in plants receiving ammonium thiosulphate and sodium sulfite treatments. The bioaccumulation factors and translocation factors of ammonium thiosulphate and sodium sulfite treatments were significantly higher than those of the other treatments. The more efficient uptake of Hg by plants upon treatment with ammonium thiosulphate and sodium sulfite compared to the other treatments might be explained by the formation of special Hg-thiosulphate complexes that could be preferentially taken up by the roots and transported in plant tissues. The application of sulfite significantly increased bioavailable Hg concentration in soil compared with that in initial soil and control soil, whereas ammonium thiosulphate significantly decreased bioavailable Hg concentration. The apparent decrease of bioavailable Hg in ammonium thiosulphate-treated soil compared with that in sodium sulfite-treated soil might be attributable to the unstable Hg-thiosulphate complexes formed between thiosulphate and Hg; they could react to produce less bioavailable Hg in the soil. The results of this study indicate that ammonium thiosulphate may be an optimal chelating

  17. Multifunctional, chitosan-based nano therapeutics: design and application for two- and three-dimensional cell culture systems

    Science.gov (United States)

    Suarato, Giulia

    There is a constant demand for sensitive and effective anti-cancer drug delivery systems, capable of detecting early-stage pathological conditions and increasing patient survival. Recently, chitosan-based drug delivery nanocomplexes have shown to smartly respond to the distinctive features of the tumor microenvironment, a complex network of extracellular molecules, stromal and endothelial cells, which supports the tumor formation and its metastatic invasion. Due to biocompatibility, easy chemical tailorability, and pH-responsiveness, chitosan has emerged as a promising candidate for the formulation of supramolecular multifunctional materials. The present study focuses on the design, fabrication and characterization of fluorescently labelled, hydrophobically modified glycol chitosan nano-micelles (HGC NPs), suitably tailored for the delivery of anti-neoplastic compounds to various tumor models. Doxorubicin-loaded HGC NPs have been delivered to a bone cancer model, both in monolayer and in 3D spheroid configuration, to assess for differences in the delivery profiles and in the therapeutic efficacy. Compared to the free drug, nanocomplexes showed rapid uptake and a more homogeneous distribution in 3D spheroids, a powerful cellular tool which recapitulates some of the in vivo tumor microenvironment features. In a second part of this thesis work, with the purpose of designing an active targeting tumor-homing nano-therapeutic system, HGC NPs have been linked, via avidin-biotin interaction, with a IVS4 peptide, a small molecule with inhibitory activity on MMP-14-mediated functions. An extensive study conducted on triple negative breast cancer cells in monolayer revealed the MMP-14-IVS4-HGC association at the cancer cell membrane, the preferential uptake, and the consequent impairment of protease-associated migratory ability. As an additional application of our engineered construct, HGC micelles have been decorated with a liver kinase B1 (LKB1), a critical kinase involved

  18. IN VIVO PERFORMANCE OF THE EXPERIMENTAL CHITOSAN BASED BONE SUBSTITUTE--ADVANCED THERAPY MEDICINAL PRODUCT. A STUDY IN SHEEP.

    Science.gov (United States)

    Bojar, Witold; Kucharska, Martyna; Ciach, Tomasz; Paśnik, Iwona; Korobowicz, Elzbieta; Patkowski, Krzysztof; Gruszecki, Tomasz; Szymanowski, Marek; Rzodkiewicz, Przemysław

    2016-01-01

    When evaluating a novel bone substitute material, advanced in vivo testing is an important step in development and safety affirmation. Sheep seems to be a valuable model for human bone turnover and remodeling activity. The experimental material composed with the stem cells is an advanced therapy medicinal product (acc. to EC Regulation 1394/2007). Our research focuses on histological differences in bone formation (guided bone regeneration--GBR) in sheep maxillas after implantation of the new chitosan/tricalcium phosphate/alginate (CH/TCP/Alg) biomaterial in comparison to the commercially available xenogenic bone graft and a/m enhanced with the stem cells isolated from the adipose tissue. Twelve adult female sheep of BCP synthetic line, weighing 60-70 kg were used for the study. The 11 mm diameter defects in maxilla bone were prepared with a trephine bur under general anesthesia and then filled with the bone substitute materials: CH/TCP/Alg, BioOss Collagen, Geistlich AG (BO), CH/TCP/Alg composed with the stem cells (CH/S) or left just with the blood clot (BC). Inbreeding cycle of the animals terminated at 4 months after surgery. Dissected specimens of the maxilla were evaluated histologically and preliminary under microtomography. Histological evaluation showed early new bone formation observed around the experimental biomaterial and commercially available BO. There were no features of purulent inflammation and necrosis, or granulomatous inflammation. Microscopic examination after 4 months following the surgery revealed trabecular bone formation around chitosan based bone graft and xenogenic material with no significant inflammatory response. Different results--no bone recreation were observed for the negative control (BC). In conclusion, the tested materials (CH/TCP/Alg and BO) showed a high degree of biocompatibility and some osteoconductivity in comparison with the control group. Although the handiness, granules size and setting time of CHffCP/Alg may be refined

  19. Iron chelating agents for iron overload diseases

    Directory of Open Access Journals (Sweden)

    Guido Crisponi

    2014-09-01

    Full Text Available Although iron is an essential element for life, an excessive amount may become extremely toxic both for its ability to generate reactive oxygen species, and for the lack in humans of regulatory mechanisms for iron excretion. Chelation therapy has been introduced in clinical practice in the seventies of last century to defend thalassemic patients from the effects of iron overload and, in spite of all its limitations, it has dramatically changed both life expectancy and quality of life of patients. It has to be considered that the drugs in clinical use present some disadvantages too, this makes urgent new more suitable chelating agents. The requirements of an iron chelator have been better and better defined over the years and in this paper they will be discussed in detail. As a final point the most interesting ligands studied in the last years will be presented.

  20. A micro-structured Si-based electrodes for high capacity electrical double layer capacitors

    Science.gov (United States)

    Krikscikas, Valdas; Oguchi, Hiroyuki; Yanazawa, Hiroshi; Hara, Motoaki; Kuwano, Hiroki

    2014-11-01

    We challenged to make basis for Si electrodes of electric double layer capacitors (EDLC) used as a power source of micro-sensor nodes. Mcroelectromechanical systems (MEMS) processes were successfully introduced to fabricate micro-structured Si-based electrodes to obtain high surface area which leads to high capacity of EDLCs. Study of fundamental properties revealed that the microstructured electrodes benefit from good wettability to electrolytes, but suffer from electric resistance. We found that this problem can be solved by metal-coating of the electrode surface. Finally we build an EDLC consisting of Au-coated micro-structured Si electrodes. This EDLC showed capacity of 14.3 mF/cm2, which is about 530 times larger than that of an EDLC consisting of flat Au electrodes.

  1. Synthesization of high-capacity auto-associative memories using complex-valued neural networks

    Science.gov (United States)

    Huang, Yu-Jiao; Wang, Xiao-Yan; Long, Hai-Xia; Yang, Xu-Hua

    2016-12-01

    In this paper, a novel design procedure is proposed for synthesizing high-capacity auto-associative memories based on complex-valued neural networks with real-imaginary-type activation functions and constant delays. Stability criteria dependent on external inputs of neural networks are derived. The designed networks can retrieve the stored patterns by external inputs rather than initial conditions. The derivation can memorize the desired patterns with lower-dimensional neural networks than real-valued neural networks, and eliminate spurious equilibria of complex-valued neural networks. One numerical example is provided to show the effectiveness and superiority of the presented results. Project supported by the National Natural Science Foundation of China (Grant Nos. 61503338, 61573316, 61374152, and 11302195) and the Natural Science Foundation of Zhejiang Province, China (Grant No. LQ15F030005).

  2. Hierarchical network architectures of carbon fiber paper supported cobalt oxide nanonet for high-capacity pseudocapacitors.

    Science.gov (United States)

    Yang, Lei; Cheng, Shuang; Ding, Yong; Zhu, Xingbao; Wang, Zhong Lin; Liu, Meilin

    2012-01-11

    We present a high-capacity pseudocapacitor based on a hierarchical network architecture consisting of Co(3)O(4) nanowire network (nanonet) coated on a carbon fiber paper. With this tailored architecture, the electrode shows ideal capacitive behavior (rectangular shape of cyclic voltammograms) and large specific capacitance (1124 F/g) at high charge/discharge rate (25.34 A/g), still retaining ~94% of the capacitance at a much lower rate of 0.25 A/g. The much-improved capacity, rate capability, and cycling stability may be attributed to the unique hierarchical network structures, which improves electron/ion transport, enhances the kinetics of redox reactions, and facilitates facile stress relaxation during cycling.

  3. Mono-layer BC2 a high capacity anode material for Li-ion batteries

    Science.gov (United States)

    Hardikar, Rahul; Samanta, Atanu; Han, Sang Soo; Lee, Kwang-Ryeol; Singh, Abhishek

    2015-04-01

    Mono-layer of graphene with high surface area compared to the bulk graphite phase, shows less Li uptake. The Li activity or kinetics can be modified via defects and/or substitutional doping. Boron and Nitrogen are the best known dopants for carbonaceous anode materials. In particular, boron doped graphene shows higher capacity and better Li adsorption compared to Nitrogen doped graphene. Here, using first principles density functional theory calculations, we study the spectrum of boron carbide (BCx) mono-layer phases in order to estimate the maximum gravimetric capacity that can be achieved by substitutional doping in graphene. Our results show that uniformly boron doped BC2 phase shows a high capacity of? 1400 mAh/g, much higher than previously reported capacity of BC3. Supported by Korea Institute of Science and Technology.

  4. High-Capacity Hybrid Optical Fiber-Wireless Communications Links in Access Networks

    DEFF Research Database (Denmark)

    Pang, Xiaodan

    techniques with both coherent and incoherent optical sources are studied and demonstrated. Employments of advanced modulation formats including phase-shift keying (PSK), M-quadrature amplitude modulation (QAM) and orthogonal frequency-division multiplexing (OFDM) for high speed photonic-wireless transmission......Integration between fiber-optic and wireless communications systems in the "last mile" access networks is currently considered as a promising solution for both service providers and users, in terms of minimizing deployment cost, shortening upgrading period and increasing mobility and flexibility...... techniques. In conclusion, the results presented in the thesis show the feasibility of employing mm-wave signals, advanced modulation formats and spatial multiplexing technologies in next generation high capacity hybrid optical fiber-wireless access systems....

  5. High-capacity thick cathode with a porous aluminum current collector for lithium secondary batteries

    Science.gov (United States)

    Abe, Hidetoshi; Kubota, Masaaki; Nemoto, Miyu; Masuda, Yosuke; Tanaka, Yuichi; Munakata, Hirokazu; Kanamura, Kiyoshi

    2016-12-01

    A high-capacity thick cathode has been studied as one of ways to improve the energy density of lithium secondary batteries. In this study, the LiFePO4 cathode with a capacity per unit area of 8.4 m Ah cm-2 corresponding to four times the capacity of conventional cathodes has been developed using a three-dimensional porous aluminum current collector called "FUSPOROUS". This unique current collector enables the smooth transfer of electrons and Li+-ions through the thick cathode, resulting in a good rate capability (discharge capacity ratio of 1.0 C/0.2 C = 0.980) and a high charge-discharge cycle performance (80% of the initial capacity at 2000th cycle) even though the electrode thickness is 400 μm. To take practical advantage of the developed thick cathode, conceptual designs for a 10-Ah class cell were also carried out using graphite and lithium-metal anodes.

  6. A high capacity multiple watermarking scheme based on Fourier descriptor and Sudoku

    Science.gov (United States)

    Zhang, Li; Zheng, Huimin

    2015-12-01

    Digital watermark is a type of technology to hide some significant information which is mainly used to protect digital data. A high capacity multiple watermarking method is proposed, which adapts the Fourier descriptor to pre-process the watermarks, while a Sudoku puzzle is used as a reference matrix in embedding process and a key in extraction process. It can dramatically reduce the required capacity by applying Fourier descriptor. Meanwhile, the security of watermarks can be guaranteed due to the Sudoku puzzle. Unlike previous algorithms applying Sudoku puzzle in spatial domain, the proposed algorithm works in transformed domain by applying LWT2.In addition, the proposed algorithm can detect the temper location accurately. The experimental results demonstrated that the goals mentioned above have been achieved.

  7. OTDM Networking for Short Range High-Capacity Highly Dynamic Networks

    DEFF Research Database (Denmark)

    Medhin, Ashenafi Kiros

    This PhD thesis aims at investigating the possibility of designing energy-efficient high-capacity (up to Tbit/s) optical network scenarios, leveraging on the effect of collective switching of many bits simultaneously, as is inherent in high bit rate serial optical data signals. The focus...... is on short range highly dynamic networks, catering to data center needs. The investigation concerns optical network scenarios, and experimental implementations of high bit rate serial data packet generation and reception, scalable optical packet labeling, simple optical label extraction and stable ultra......-fast optical packet switching, with the constraint that there must be potential energy savings, which is also evaluated. A survey of the current trends in data centers is given and state-of-the-art research approaches are mentioned. Optical time-division multiplexing is proposed and demonstrated to generate...

  8. A new method for high-capacity information hiding in video robust against temporal desynchronization

    Science.gov (United States)

    Mitekin, Vitaly; Fedoseev, Victor A.

    2015-02-01

    This paper presents a new method for high-capacity information hiding in digital video and algorithms of embedding and extraction of hidden information based on this method. These algorithms do not require temporal synchronization to provide robustness against both malicious and non-malicious frame dropping (temporal desynchronization). At the same time, due to randomized distribution of hidden information bits across the video frames, the proposed method allows to increase the hiding capacity proportionally to the number of frames used for information embedding. The proposed method is also robust against "watermark estimation" attack aimed at estimation of hidden information without knowing the embedding key or non-watermarked video. Presented experimental results demonstrate declared features of this method.

  9. Lamprey parasitism of sharks and teleosts: high capacity urea excretion in an extant vertebrate relic.

    Science.gov (United States)

    Wilkie, Michael P; Turnbull, Steven; Bird, Jonathan; Wang, Yuxiang S; Claude, Jaime F; Youson, John H

    2004-08-01

    We observed 10 sea lampreys (Petromyzon marinus) parasitizing basking sharks (Cetorhinus maximus), the world's second largest fish, in the Bay of Fundy. Due to the high concentrations of urea in the blood and tissues of ureosmotic elasmobranchs, we hypothesized that sea lampreys would have mechanisms to eliminate co-ingested urea while feeding on basking sharks. Post-removal urea excretion rates (J(Urea)) in two lampreys, removed from separate sharks by divers, were initially 450 ( approximately 9000 micromol N kg-1 h-1) and 75 times ( approximately 1500 micromol N kg-1 h-1) greater than basal (non-feeding) rates ( approximately 20 micromol N kg-1 h-1). In contrast, J(Urea) increased by 15-fold after parasitic lampreys were removed from non-ureosmotic rainbow trout (Oncorhynchus mykiss). Since activities of the ornithine urea cycle (OUC) enzymes, carbamoyl phosphate synthetase III (CPSase III) and ornithine carbamoyl transferase (OCT) were relatively low in liver and below detection in intestine and muscle, it is unlikely that the excreted urea arose from de novo urea synthesis. Measurements of arginase activity suggested that hydrolysis of dietary arginine made a minor contribution to J(Urea.). Post-feeding ammonia excretion rates (J(Amm)) were 15- to 25-fold greater than basal rates in lampreys removed from both basking sharks and rainbow trout, suggesting that parasitic lampreys have a high capacity to deaminate amino acids. We conclude that the sea lamprey's ability to penetrate the dermal denticle armor of sharks, to rapidly excrete large volumes of urea and a high capacity to deaminate amino acids, represent adaptations that have contributed to the evolutionary success of these phylogenetically ancient vertebrates.

  10. High capacity implantable data recorders: system design and experience in canines and Denning black bears.

    Science.gov (United States)

    Laske, Timothy G; Harlow, Henry J; Werder, Jon C; Marshall, Mark T; Iaizzo, Paul A

    2005-11-01

    Implantable medical devices have increasingly large capacities for storing patient data as a diagnostic aid and to allow patient monitoring. Although these devices can store a significant amount of data, an increased ability for data storage was required for chronic monitoring in recent physiological studies. Novel high capacity implantable data recorders were designed for use in advanced physiological studies of canines and free-ranging black bears. These hermitically sealed titanium encased recorders were chronically implanted and programmed to record intrabody broadband electrical activity to monitor electrocardiograms and electromyograms, and single-axis acceleration to document relative activities. Changes in cardiac T-wave morphology were characterized in the canines over a 6 month period, providing new physiological data for the design of algorithms and filtering schemes that could be employed to avoid inappropriate implantable defibrillator shocks. Unique characteristics of bear hibernation physiology were successfully identified in the black bears, including: heart rate, respiratory rate, gross body movement, and shiver An unanticipated high rejection rate of these devices occurred in the bears, with five of six being externalized during the overwintering period, including two devices implanted in the peritoneal cavity. High capacity implantable data recorders were designed and utilized for the collection of long-term physiological data in both laboratory and extreme field environments. The devices described were programmable to accommodate the diverse research protocols. Additionally, we have described substantial differences in the response of two species to a common device. Variations in the foreign body response of different mammals must be identified and taken into consideration when choosing tissue-contacting materials in the application of biomedical technology to physiologic research.

  11. Facile fabrication of Si mesoporous nanowires for high-capacity and long-life lithium storage

    Science.gov (United States)

    Chen, Jizhang; Yang, Li; Rousidan, Saibihai; Fang, Shaohua; Zhang, Zhengxi; Hirano, Shin-Ichi

    2013-10-01

    Si has the second highest theoretical capacity among all the known anode materials for lithium ion batteries, whereas it is vulnerable to pulverization and crumbling upon lithiation/delithiation. Herein, Si mesoporous nanowires prepared by a scalable and cost-effective procedure are reported for the first time. Such nanowire morphology and mesoporous structure can effectively buffer the huge lithiation-induced volume expansion of Si, therefore contributing to excellent cycling stability and high-rate capability. Reversible capacities of 1826.8 and 737.4 mA h g-1 can be obtained at 500 mA g-1 and a very high current density of 10 A g-1, respectively. After 1000 cycles at 2500 mA g-1, this product still maintains a high capacity of 643.5 mA h g-1.Si has the second highest theoretical capacity among all the known anode materials for lithium ion batteries, whereas it is vulnerable to pulverization and crumbling upon lithiation/delithiation. Herein, Si mesoporous nanowires prepared by a scalable and cost-effective procedure are reported for the first time. Such nanowire morphology and mesoporous structure can effectively buffer the huge lithiation-induced volume expansion of Si, therefore contributing to excellent cycling stability and high-rate capability. Reversible capacities of 1826.8 and 737.4 mA h g-1 can be obtained at 500 mA g-1 and a very high current density of 10 A g-1, respectively. After 1000 cycles at 2500 mA g-1, this product still maintains a high capacity of 643.5 mA h g-1. Electronic supplementary information (ESI) available: SEM images; N2 adsorption/desorption isotherm; long-term cycling performance at 500 mA g-1 comparison with other literature. See DOI: 10.1039/c3nr03955b

  12. Improving adjuvanticity of quaternized chitosan-based microgels for H5N1 split vaccine by tailoring the particle properties to achieve antigen dose sparing effect.

    Science.gov (United States)

    Wang, Yue-Qi; Fan, Qing-Ze; Liu, Yan; Yue, Hua; Ma, Xiao-Wei; Wu, Jie; Ma, Guang-Hui; Su, Zhi-Guo

    2016-12-30

    In this study, we developed the quaternized chitosan microgels without chemical crosslinking as an adjuvant of H5N1 split vaccine. The microgels with pH-sensitivity, positive surface charge and good biocompatibility, have been demonstrated in favor of enhancing both humoral and cellular immune response. However, the detailed mechanism of the chitosan-based microgels to enhance antigen specific immune responses remains unclear. Therefore, we prepared the quaternized chitosan microgels with well defined quaternization degrees (QDs, 20-80%) and particle sizes (800nm-5μm) by the premix membrane emulsification technique, and investigated the effect of quaternization degree (QD) and size on the adjuvanticity of microgels. Results suggested that microgels with relatively smaller size (807nm) and moderate quaternization degree (QD 41% and 60%) were favorable for a maximum immune response. The mechanism was studied and explained by examining the characteristics of microgels and investigating the stimulation of bone-marrow derived dendritic cells (BMDCs). Moreover, they induced significantly stronger immune responses at lower antigen doses (known as antigen sparing effect) compared to aluminum adjuvant. These data indicated that a maximum immune response can be achieved by controlling properties of chitosan microgels, which also could serve as a significant guidance for rational design of chitosan-based particle adjuvant. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Biomedical Activity of Chitin/Chitosan Based Materials—Influence of Physicochemical Properties Apart from Molecular Weight and Degree of N-Acetylation

    Directory of Open Access Journals (Sweden)

    Mirko X. Weinhold

    2011-11-01

    Full Text Available The physicochemical nature of chitin and chitosan, which influences the biomedical activity of these compounds, is strongly related to the source of chitin and the conditions of the chitin/chitosan production process. Apart from widely described key factors such as weight-averaged molecular weight (MW and degree of N-acetylation (DA, other physicochemical parameters like polydispersity (MW/MN, crystallinity or the pattern of acetylation (PA have to be taken into consideration. From the biological point of view, these parameters affect a very important factor—the solubility of chitin and chitosan in water and organic solvents. The physicochemical properties of chitosan solutions can be controlled by manipulating solution conditions (temperature, pH, ionic strength, concentration, solvent. The degree of substitution of the hydroxyl and the amino groups or the degree of quaternization of the amino groups also influence the mechanical and biological properties of chitosan samples. Finally, a considerable research effort has been directed towards developing safe and efficient chitin/chitosan-based products because many factors, like the size of nanoparticles, can determine the biomedical characteristics of medicinal products. The influence of these factors on the biomedical activity of chitin/chitosan-based products is presented in this report in more detail.

  14. Application of iron chelates in hydrodesulphurisation

    NARCIS (Netherlands)

    Wubs, Harm Jan

    1994-01-01

    Several iron chelate based methods for removing hydrogen sulphide from gas streams have been developed over the years. Notwithstanding the number of hydrodesulphurisation plants already in operation, the development of these processes has been more a kind of an art rather than a result of rational p

  15. Recent developments centered on orally active iron chelators

    Directory of Open Access Journals (Sweden)

    Robert Hider

    2014-09-01

    Full Text Available Over the past twenty years there has been a growing interest in the orally active iron chelators, deferiprone and deferasirox, both have been extensively studied. The ability of these compounds to mobilize iron from the heart and endocrine tissue has presented the clinician with some advantages over desferrioxamine, the first therapeutic iron chelator. Other orally active iron chelators are currently under development. The critical features necessary for the design of therapeutically useful orally active iron chelators are presented in this review, together with recent studies devoted to the design of such chelators. This newly emerging range of iron chelators will enable clinicians to apply iron chelation methodology to other disease states and to begin to design personalized chelation regimes.

  16. Overview of chelation recommendations for thalassaemia and sickle cell disease

    Directory of Open Access Journals (Sweden)

    Banu Kaya

    2014-12-01

    Full Text Available The long term consequences of iron toxicity are mostly reversible with effective iron chelation therapy. Recommendations for use of chelation therapy in transfusion dependent thalassaemia (TDT, sickle cell disease (SCD and non transfusion dependent thalassaemia (NTDT continue to evolve as our knowledge and clinical experience increases. Improved chelation options including drug combinations and a better understanding of condition specific factors may help to improve efficiency of chelation regimens and meet the needs of patients more effectively.

  17. Study on a high capacity two-stage free piston Stirling cryocooler working around 30 K

    Science.gov (United States)

    Wang, Xiaotao; Zhu, Jian; Chen, Shuai; Dai, Wei; Li, Ke; Pang, Xiaomin; Yu, Guoyao; Luo, Ercang

    2016-12-01

    This paper presents a two-stage high-capacity free-piston Stirling cryocooler driven by a linear compressor to meet the requirement of the high temperature superconductor (HTS) motor applications. The cryocooler system comprises a single piston linear compressor, a two-stage free piston Stirling cryocooler and a passive oscillator. A single stepped displacer configuration was adopted. A numerical model based on the thermoacoustic theory was used to optimize the system operating and structure parameters. Distributions of pressure wave, phase differences between the pressure wave and the volume flow rate and different energy flows are presented for a better understanding of the system. Some characterizing experimental results are presented. Thus far, the cryocooler has reached a lowest cold-head temperature of 27.6 K and achieved a cooling power of 78 W at 40 K with an input electric power of 3.2 kW, which indicates a relative Carnot efficiency of 14.8%. When the cold-head temperature increased to 77 K, the cooling power reached 284 W with a relative Carnot efficiency of 25.9%. The influences of different parameters such as mean pressure, input electric power and cold-head temperature are also investigated.

  18. MEO based secured, robust, high capacity and perceptual quality image watermarking in DWT-SVD domain.

    Science.gov (United States)

    Gunjal, Baisa L; Mali, Suresh N

    2015-01-01

    The aim of this paper is to present multiobjective evolutionary optimizer (MEO) based highly secured and strongly robust image watermarking technique using discrete wavelet transform (DWT) and singular value decomposition (SVD). Many researchers have failed to achieve optimization of perceptual quality and robustness with high capacity watermark embedding. Here, we achieved optimized peak signal to noise ratio (PSNR) and normalized correlation (NC) using MEO. Strong security is implemented through eight different security levels including watermark scrambling by Fibonacci-Lucas transformation (FLT). Haar wavelet is selected for DWT decomposition to compare practical performance of wavelets from different wavelet families. The technique is non-blind and tested with cover images of size 512x512 and grey scale watermark of size 256x256. The achieved perceptual quality in terms of PSNR is 79.8611dBs for Lena, 87.8446 dBs for peppers and 93.2853 dBs for lake images by varying scale factor K1 from 1 to 5. All candidate images used for testing namely Lena, peppers and lake images show exact recovery of watermark giving NC equals to 1. The robustness is tested against variety of attacks on watermarked image. The experimental demonstration proved that proposed method gives NC more than 0.96 for majority of attacks under consideration. The performance evaluation of this technique is found superior to all existing hybrid image watermarking techniques under consideration.

  19. On-demand high-capacity ride-sharing via dynamic trip-vehicle assignment.

    Science.gov (United States)

    Alonso-Mora, Javier; Samaranayake, Samitha; Wallar, Alex; Frazzoli, Emilio; Rus, Daniela

    2017-01-17

    Ride-sharing services are transforming urban mobility by providing timely and convenient transportation to anybody, anywhere, and anytime. These services present enormous potential for positive societal impacts with respect to pollution, energy consumption, congestion, etc. Current mathematical models, however, do not fully address the potential of ride-sharing. Recently, a large-scale study highlighted some of the benefits of car pooling but was limited to static routes with two riders per vehicle (optimally) or three (with heuristics). We present a more general mathematical model for real-time high-capacity ride-sharing that (i) scales to large numbers of passengers and trips and (ii) dynamically generates optimal routes with respect to online demand and vehicle locations. The algorithm starts from a greedy assignment and improves it through a constrained optimization, quickly returning solutions of good quality and converging to the optimal assignment over time. We quantify experimentally the tradeoff between fleet size, capacity, waiting time, travel delay, and operational costs for low- to medium-capacity vehicles, such as taxis and van shuttles. The algorithm is validated with ∼3 million rides extracted from the New York City taxicab public dataset. Our experimental study considers ride-sharing with rider capacity of up to 10 simultaneous passengers per vehicle. The algorithm applies to fleets of autonomous vehicles and also incorporates rebalancing of idling vehicles to areas of high demand. This framework is general and can be used for many real-time multivehicle, multitask assignment problems.

  20. Incorporating magnesium and calcium cations in porous organic frameworks for high-capacity hydrogen storage.

    Science.gov (United States)

    Wang, Lin; Sun, Yingxin; Sun, Huai

    2011-01-01

    We propose incorporating a bi-functional group consisting of magnesium or calcium cations and a 1,2,4,5-benzenetetroxide anion (C6H2O4(4-)) in porous materials to enhance the hydrogen storage capacity. The C6H2O4M2 bifunctional group is highly stable and polarized, and each group provides 18 (M = Mg) or 22 (M = Ca) binding sites for hydrogen molecules with an average binding energy of ca. 10 kJ mol(-1) per hydrogen molecule based on RIMP2/ TZVPP calculations. Two porous materials (PAF-Mg or PAF-Ca) constructed with the bi-functional groups show remarkable improvement in hydrogen uptakes at normal ambient conditions. At 233 K and 10 MPa, the predicted gravimetric uptakes are 6.8 and 6.4 wt% for PAF-Mg and PAF-Ca respectively. This work reveals that fabricating materials with large numbers of binding sites and relatively low binding energies is a promising approach to achieve high capacity for on-board storage of hydrogen.

  1. A high-capacity steganography scheme for JPEG2000 baseline system.

    Science.gov (United States)

    Zhang, Liang; Wang, Haili; Wu, Renbiao

    2009-08-01

    Hiding capacity is very important for efficient covert communications. For JPEG2000 compressed images, it is necessary to enlarge the hiding capacity because the available redundancy is very limited. In addition, the bitstream truncation makes it difficult to hide information. In this paper, a high-capacity steganography scheme is proposed for the JPEG2000 baseline system, which uses bit-plane encoding procedure twice to solve the problem due to bitstream truncation. Moreover, embedding points and their intensity are determined in a well defined quantitative manner via redundancy evaluation to increase hiding capacity. The redundancy is measured by bit, which is different from conventional methods which adjust the embedding intensity by multiplying a visual masking factor. High volumetric data is embedded into bit-planes as low as possible to keep message integrality, but at the cost of an extra bit-plane encoding procedure and slightly changed compression ratio. The proposed method can be easily integrated into the JPEG2000 image coder, and the produced stego-bitstream can be decoded normally. Simulation shows that the proposed method is feasible, effective, and secure.

  2. Fast and simple high-capacity quantum cryptography with error detection

    Science.gov (United States)

    Lai, Hong; Luo, Ming-Xing; Pieprzyk, Josef; Zhang, Jun; Pan, Lei; Li, Shudong; Orgun, Mehmet A.

    2017-04-01

    Quantum cryptography is commonly used to generate fresh secure keys with quantum signal transmission for instant use between two parties. However, research shows that the relatively low key generation rate hinders its practical use where a symmetric cryptography component consumes the shared key. That is, the security of the symmetric cryptography demands frequent rate of key updates, which leads to a higher consumption of the internal one-time-pad communication bandwidth, since it requires the length of the key to be as long as that of the secret. In order to alleviate these issues, we develop a matrix algorithm for fast and simple high-capacity quantum cryptography. Our scheme can achieve secure private communication with fresh keys generated from Fibonacci- and Lucas- valued orbital angular momentum (OAM) states for the seed to construct recursive Fibonacci and Lucas matrices. Moreover, the proposed matrix algorithm for quantum cryptography can ultimately be simplified to matrix multiplication, which is implemented and optimized in modern computers. Most importantly, considerably information capacity can be improved effectively and efficiently by the recursive property of Fibonacci and Lucas matrices, thereby avoiding the restriction of physical conditions, such as the communication bandwidth.

  3. High capacity for extracellular acid-base regulation in the air-breathing fish Pangasianodon hypophthalmus.

    Science.gov (United States)

    Damsgaard, Christian; Gam, Le Thi Hong; Tuong, Dang Diem; Thinh, Phan Vinh; Huong Thanh, Do Thi; Wang, Tobias; Bayley, Mark

    2015-05-01

    The evolution of accessory air-breathing structures is typically associated with reduction of the gills, although branchial ion transport remains pivotal for acid-base and ion regulation. Therefore, air-breathing fishes are believed to have a low capacity for extracellular pH regulation during a respiratory acidosis. In the present study, we investigated acid-base regulation during hypercapnia in the air-breathing fish Pangasianodon hypophthalmus in normoxic and hypoxic water at 28-30°C. Contrary to previous studies, we show that this air-breathing fish has a pronounced ability to regulate extracellular pH (pHe) during hypercapnia, with complete metabolic compensation of pHe within 72 h of exposure to hypoxic hypercapnia with CO2 levels above 34 mmHg. The high capacity for pHe regulation relies on a pronounced ability to increase levels of HCO3(-) in the plasma. Our study illustrates the diversity in the physiology of air-breathing fishes, such that generalizations across phylogenies may be difficult.

  4. On-demand high-capacity ride-sharing via dynamic trip-vehicle assignment

    Science.gov (United States)

    Alonso-Mora, Javier; Samaranayake, Samitha; Wallar, Alex; Frazzoli, Emilio; Rus, Daniela

    2017-01-01

    Ride-sharing services are transforming urban mobility by providing timely and convenient transportation to anybody, anywhere, and anytime. These services present enormous potential for positive societal impacts with respect to pollution, energy consumption, congestion, etc. Current mathematical models, however, do not fully address the potential of ride-sharing. Recently, a large-scale study highlighted some of the benefits of car pooling but was limited to static routes with two riders per vehicle (optimally) or three (with heuristics). We present a more general mathematical model for real-time high-capacity ride-sharing that (i) scales to large numbers of passengers and trips and (ii) dynamically generates optimal routes with respect to online demand and vehicle locations. The algorithm starts from a greedy assignment and improves it through a constrained optimization, quickly returning solutions of good quality and converging to the optimal assignment over time. We quantify experimentally the tradeoff between fleet size, capacity, waiting time, travel delay, and operational costs for low- to medium-capacity vehicles, such as taxis and van shuttles. The algorithm is validated with ∼3 million rides extracted from the New York City taxicab public dataset. Our experimental study considers ride-sharing with rider capacity of up to 10 simultaneous passengers per vehicle. The algorithm applies to fleets of autonomous vehicles and also incorporates rebalancing of idling vehicles to areas of high demand. This framework is general and can be used for many real-time multivehicle, multitask assignment problems. PMID:28049820

  5. Multiresidue analysis of pesticides in vegetables and fruits using a high capacity absorbent polymer for water.

    Science.gov (United States)

    Obana, H; Akutsu, K; Okihashi, M; Kakimoto, S; Hori, S

    1999-08-01

    A single extraction and a single clean-up procedure was developed for multi-residue analysis of pesticides in non-fatty vegetables and fruits. The method involves the use of a high capacity absorbent polymer for water as a drying agent in extraction from wet food samples and of a graphitized carbon column for clean-up. A homogeneously chopped food sample (20 g) and polymer (3 g) were mixed to absorb water from the sample and then 10 min later the mixture was vigorously extracted with ethyl acetate (100 ml). The extract (50 ml), separated by filtration, was loaded on a graphitized carbon column without concentration. Additional ethyl acetate (50 ml) was also eluted and both eluates were concentrated to 5 ml for analysis. The procedure for sample preparation was completed within 2 h. In a recovery test, 107 pesticides were spiked and average recoveries were more than 80% from asparagus, orange, potato and strawberry. Most pesticides were recovered in the range 70-120% with usually less than a 10% RSD for six experiments. The results indicated that a single extraction with ethyl acetate in the presence of polymer can be applied to the monitoring of pesticide residues in foods.

  6. Li2C2, a High-Capacity Cathode Material for Lithium Ion Batteries.

    Science.gov (United States)

    Tian, Na; Gao, Yurui; Li, Yurong; Wang, Zhaoxiang; Song, Xiaoyan; Chen, Liquan

    2016-01-11

    As a typical alkaline earth metal carbide, lithium carbide (Li2C2) has the highest theoretical specific capacity (1400 mA h g(-1)) among all the reported lithium-containing cathode materials for lithium ion batteries. Herein, the feasibility of using Li2C2 as a cathode material was studied. The results show that at least half of the lithium can be extracted from Li2C2 and the reversible specific capacity reaches 700 mA h g(-1). The C≡C bond tends to rotate to form C4 (C≡C⋅⋅⋅C≡C) chains during lithium extraction, as indicated with the first-principles molecular dynamics (FPMD) simulation. The low electronic and ionic conductivity are believed to be responsible for the potential gap between charge and discharge, as is supported with density functional theory (DFT) calculations and Arrhenius fitting results. These findings illustrate the feasibility to use the alkali and alkaline earth metal carbides as high-capacity electrode materials for secondary batteries.

  7. State Violence and Oppositional Protest in High-Capacity Authoritarian Regimes

    Directory of Open Access Journals (Sweden)

    Hank Johnston

    2012-05-01

    Full Text Available This examination of the mobilization-repression nexus in high-capacity authoritarian regimes draws on examples from China, Russia, Iran, and several Middle Eastern states to develop a framework for analyzing state violence and how political oppositions are organized. The study examines middle and low levels of state violence, the provincial and municipal organization of party and regime, and the police, private militias, and thugs as low-level enforcers, and focuses on: (1 the complexity of the state’s apparatus of repression and control and how different levels exercise different forms of violence against activists; (2 the creativity of the opposition’s actions to voice its demands and avoid repression and surveillance; and (3 the recursive relationship between the two, a dark dance between state and opposition with high stakes for both. Hierarchical analysis at national, provincial, and local levels, and lateral analysis across these levels, where elite interests frequently diverge, show that intersections and gaps on both axes can create lapses in social control and openings the opposition. These free spaces of speech and innovative action give rise to novel ways to keep oppositional sentiments in the public forum. The article offers several propositions for analyzing repression and state violence at various levels, and, similarly, the various ways that these free spaces occur.

  8. An Aqueous Redox-Flow Battery with High Capacity and Power: The TEMPTMA/MV System.

    Science.gov (United States)

    Janoschka, Tobias; Martin, Norbert; Hager, Martin D; Schubert, Ulrich S

    2016-11-07

    Redox-flow batteries (RFB) can easily store large amounts of electric energy and thereby mitigate the fluctuating output of renewable power plants. They are widely discussed as energy-storage solutions for wind and solar farms to improve the stability of the electrical grid. Most common RFB concepts are based on strongly acidic metal-salt solutions or poorly performing organics. Herein we present a battery which employs the highly soluble N,N,N-2,2,6,6-heptamethylpiperidinyl oxy-4-ammonium chloride (TEMPTMA) and the viologen derivative N,N'-dimethyl-4,4-bipyridinium dichloride (MV) in a simple and safe aqueous solution as redox-active materials. The resulting battery using these electrolyte solutions has capacities of 54 Ah L(-1) , giving a total energy density of 38 Wh L(-1) at a cell voltage of 1.4 V. With peak current densities of up to 200 mA cm(-2) the TEMPTMA/MV system is a suitable candidate for compact high-capacity and high-power applications.

  9. The effect of chitosan-based edible film and high hydrostatic pressure process on the microbiological and chemical quality of rainbow trout (Oncorhynchus mykiss Walbaum) fillets during cold storage (4±1°C)

    Science.gov (United States)

    Günlü, Ali; Sipahioğlu, Sinem; Alpas, Hami

    2014-01-01

    The objective of this study is to determine the changes in the chemical and microbiological quality of fresh rainbow trout (Oncorhynchus mykiss Walbaum) fillets during storage at 4±1°C as a result of chitosan-based edible film coating, vacuum packaging and high pressure application processes. Chemical (pH, total volatile basic nitrogen and thiobarbituric acid index) and microbiological (total mesophilic and total psychrophilic microorganism) shelf life analyses were carried out in 4-day intervals for samples that were vacuum packaged (C), subjected to high pressure after vacuum packaging (high hydrostatic pressure (HHP)), vacuum packaged after being wrapped by chitosan-based film (CFW) and subjected to high pressure after vacuum packaging and being wrapped by chitosan-based film (HHP+CFW ). According to the chemical and microbiological shelf life analysis results of rainbow trout fillets, shelf life increases of 4 days in HHP group samples, 8 days in CFW group samples and 24 days in HHP+CFW group samples were provided in comparison with the control group. In conclusion, it was determined that high pressure and wrapping with chitosan-based film had protective effect both chemically and microbiologically and that the most effective protection was obtained when both methods were used together.

  10. Influence of Chelating Agents on Chromium Fate in Sediment

    Institute of Scientific and Technical Information of China (English)

    WANGXIAOCHANG; SUNJINHE; 等

    1996-01-01

    A laboratory investigation on reaction between chelating agents and chromium was conducted to evaluate the effect of chelating agents on the adsorption and desorption of chromium in sediment.The amount of adsorbed chromium(VI) in sediment decreased slightly by 5%-10% because of addition of chelating agents.Chelating agents inhibited the removal of Cr(Ⅲ)by sediment from solutions and the inhibiting effect was in the order:citric acid>tartaric acid>EDTA,Salicylic acid.No effect of chelating agents on desorption of chromium in sediment was observed.

  11. Current recommendations for chelation for transfusion-dependent thalassemia.

    Science.gov (United States)

    Kwiatkowski, Janet L

    2016-03-01

    Regular red cell transfusions used to treat thalassemia cause iron loading that must be treated with chelation therapy. Morbidity and mortality in thalassemia major are closely linked to the adequacy of chelation. Chelation therapy removes accumulated iron and detoxifies iron, which can prevent and reverse much of the iron-mediated organ injury. Currently, three chelators are commercially available--deferoxamine, deferasirox, and deferiprone--and each can be used as monotherapy or in combination. Close monitoring of hepatic and cardiac iron burden is central to tailoring chelation. Other factors, including properties of the individual chelators, ongoing transfusional iron burden, and patient preference, must be considered. Monotherapy generally is utilized if the iron burden is in an acceptable or near-acceptable range and the dose is adjusted accordingly. Combination chelation often is employed for patients with high iron burden, iron-related organ injury, or where adverse effects of chelators preclude administration of an appropriate chelator dose. The combination of deferoxamine and deferiprone is the best studied, but increasing data are available on the safety and efficacy of newer chelator combinations, including deferasirox with deferoxamine and the oral-only combination of deferasirox with deferiprone. The expanding chelation repertoire should enable better control of iron burden and improved outcomes.

  12. Novel chitosan-based fluorescent materials for the selective detection and adsorption of Fe3+ in water and consequent bio-imaging applications.

    Science.gov (United States)

    Meng, Qingtao; Su, Weiping; He, Cheng; Duan, Chunying

    2012-08-15

    A series of fluorescent materials were synthesized by modification of chitosan (CS) with 4-fluoresceincarboxaldehyde (Fluo) and N-methyl-carbazole-3-aldehyde (Cb). Both L-CS-Fluo and L-CS-Cb feature excellent water-solubility and exhibit highly selective fluorescence response to Fe(3+) in environment and biological fields. The high-molecular weight chitosan-based materials: H-CS-Fluo and H-CS-Cb take on doubled absorptivity compared to free chitosan due to the introduction of fluorescence probes. These modified-probe chitosan materials could be regenerated by treating with EDTA. Meanwhile, monomer probes AG-Fluo and AG-Cb linked by D-glucosamine were also synthesized to explore the binding efficiency. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. Recombinant Bone Morphogenetic Protein 2 Stimulates the Remodeling Chitosan-Based Porous Scaffold Into Hyaline-like Cartilage: Study in Heterotopic Implantation

    Directory of Open Access Journals (Sweden)

    Nurshat M. Gaifullin

    2013-09-01

    Full Text Available To study the morphology of remodeling the chitosan-based three-dimensional porous scaffold, containing bone morphogenetic protein-2 (BMP-2 for chondroinduction, the experiments with heterotopic implantation using 28 Wistar rats were carried out. Scaffolds with growth factor (n=12 or without it (n=12, against intact control (n=4 were implanted subcutaneously. Classical methods of histology and morphometry as well as immune histochemical markers (CD-68, CD-31, MMP-9, TIMP-1, and osteonectin expression, one used to investigate zone of remodeling in euthanized animals at 4 and 8 weeks after implantation. The BMP-2 application provides more intensive and rapid new cartilage formation from the scaffold matter. The additional chondroinductive effect proved more intensive settlement and proliferation of chondral cells in the regenerate, expression of chondral phenotype with the building the hyaline-like matrix, and the supporting necessary balance between the matrix metalloproteinases and their tissue inhibitors.

  14. Federal regulation of unapproved chelation products.

    Science.gov (United States)

    Lee, Charles E

    2013-12-01

    Chelation products can be helpful in the treatment of metal poisoning. However, many unapproved products with unproven effectiveness and safety are marketed to consumers, frequently via the internet. This paper describes the primary responsibility of the Health Fraud and Consumer Outreach Branch of the United States Food and Drug Administration to identify and address health fraud products. Efforts to prevent direct and indirect hazards to the population's health through regulatory actions are described.

  15. The sustained-release behavior and in vitro and in vivo transfection of pEGFP-loaded core-shell-structured chitosan-based composite particles

    Directory of Open Access Journals (Sweden)

    Wang Y

    2014-10-01

    Full Text Available Yun Wang,1 Fu-xing Lin,2 Yu Zhao,1 Mo-zhen Wang,2 Xue-wu Ge,2 Zheng-xing Gong,1 Dan-dan Bao,1 Yu-fang Gu1 1Department of Plastic Surgery, First Affiliated Hospital of Anhui Medical University, 2CAS Key Laboratory of Soft Matter Chemistry, Department of Polymer Science and Engineering, University of Science and Technology of China, Hefei, Anhui, People’s Republic of China Abstract: Novel submicron core-shell-structured chitosan-based composite particles ­encapsulated with enhanced green fluorescent protein plasmids (pEGFP were prepared by complex coacervation method. The core was pEGFP-loaded thiolated N-alkylated chitosan (TACS and the shell was pH- and temperature-responsive hydroxybutyl chitosan (HBC. pEGFP-loaded TACS-HBC composite particles were spherical, and had a mean diameter of approximately 120 nm, as measured by transmission electron microscopy and particle size analyzer. pEGFP showed sustained release in vitro for >15 days. Furthermore, in vitro transfection in human embryonic kidney 293T and human cervix epithelial cells, and in vivo transfection in mice skeletal muscle of loaded pEGFP, were investigated. Results showed that the expression of loaded pEGFP, both in vitro and in vivo, was slow but could be sustained over a long period. pEGFP expression in mice skeletal muscle was sustained for >60 days. This work indicates that these submicron core-shell-structured chitosan-based composite particles could potentially be used as a gene vector for in vivo controlled gene transfection. Keywords: gene therapy, gene transfection, hydroxybutyl chitosan, thiolated N-alkylated chitosan, pEGFP, complex coacervation

  16. High-capacity thermo-responsive magnetic molecularly imprinted polymers for selective extraction of curcuminoids.

    Science.gov (United States)

    You, Qingping; Zhang, Yuping; Zhang, Qingwen; Guo, Junfang; Huang, Weihua; Shi, Shuyun; Chen, Xiaoqin

    2014-08-08

    Thermo-responsive magnetic molecularly imprinted polymers (TMMIPs) for selective recognition of curcuminoids with high capacity and selectivity have firstly been developed. The resulting TMMIPs were characterized by TEM, FT-IR, TGA, VSM and UV, which indicated that TMMIPs showed thermo-responsiveness [lower critical solution temperature (LCST) at 33.71°C] and rapid magnetic separation (5s). The polymerization, adsorption and release conditions were optimized in detail to obtain the highest binding capacity, selectivity and release ratio. We found that the adopted thermo-responsive monomer [N-isopropylacrylamide (NIPAm)] could be considered not only as inert polymer backbone for thermo-responsiveness but also as functional co-monomers combination with basic monomer (4-VP) for more specific binding sites when ethanol was added in binding solution. The maximum adsorption capacity with highest selectivity of curcumin was 440.3μg/g (1.93 times that on MMIPs with no thermosensitivity) at 45°C (above LCST) in 20% (v/v) ethanol solution on shrunk TMMIPs, and the maximum release proportion was about 98% at 20°C (below LCST) in methanol-acetic acid (9/1, v/v) solution on swelled TMMIPs. The adsorption process between curcumin and TMMIPs followed Langumuir adsorption isotherm and pseudo-first-order reaction kinetics. The prepared TMMIPs also showed high reproducibility (RSD<6% for batch-to-batch evaluation) and stability (only 7% decrease after five cycles). Subsequently, the TMMIPs were successfully applied for selective extraction of curcuminoids from complex natural product, Curcuma longa.

  17. Spherical polystyrene-supported chitosan thin film of fast kinetics and high capacity for copper removal

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Wei, E-mail: jiangwei@nju.edu.cn; Chen, Xubin; Pan, Bingcai; Zhang, Quanxing; Teng, Long; Chen, Yufan; Liu, Lu

    2014-07-15

    Graphical abstract: - Highlights: • Sub-micron-sized polystyrene supported chitosan thin-film was synthesized. • Absorbents exhibited fast kinetics and high capacity for Cu(II) removal from water. • Absorbents could be employed for repeated use for Cu(II) removal after regeneration. - Abstract: In order to accelerate the kinetics and improve the utilization of the surface active groups of chitosan (CS) for heavy metal ion removal, sub-micron-sized polystyrene supported chitosan thin-film was synthesized by the electrostatic assembly method. Glutaraldehyde was used as cross-linking agent. Chitosan thin-film was well coated onto the surface of the polystyrene (PS) beads characterized by scanning electron microscopy (SEM) and energy dispersive X-ray (EDX). Their adsorption toward Cu(II) ions was investigated as a function of solution pH, degree of cross-linking, equilibrium Cu(II) ions concentration and contact time. The maximum adsorptive capacity of PS–CS was 99.8 mg/g in the adsorption isotherm study. More attractively, the adsorption equilibrium was achieved in 10 min, which showed superior properties among similar adsorbents. Continuous adsorption–desorption cyclic results demonstrated that Cu(II)-loaded PS–CS can be effectively regenerated by a hydrochloric acid solution (HCl), and the regenerated composite beads could be employed for repeated use without significant capacity loss, indicating the good stability of the adsorbents. The XPS analysis confirmed that the adsorption process was due to surface complexes with atoms of chitosan. Generally, PS beads could be employed as a promising host to fabricate efficient composites that originated from chitosan or other bio-sorbents for environmental remediation.

  18. A Low Cost, High Capacity Regenerable Sorbent for Pre-combustion CO{sub 2} Capture

    Energy Technology Data Exchange (ETDEWEB)

    Alptekin, Gokhan

    2012-09-30

    The overall objective of the proposed research is to develop a low cost, high capacity CO{sub 2} sorbent and demonstrate its technical and economic viability for pre-combustion CO{sub 2} capture. The specific objectives supporting our research plan were to optimize the chemical structure and physical properties of the sorbent, scale-up its production using high throughput manufacturing equipment and bulk raw materials and then evaluate its performance, first in bench-scale experiments and then in slipstream tests using actual coal-derived synthesis gas. One of the objectives of the laboratory-scale evaluations was to demonstrate the life and durability of the sorbent for over 10,000 cycles and to assess the impact of contaminants (such as sulfur) on its performance. In the field tests, our objective was to demonstrate the operation of the sorbent using actual coal-derived synthesis gas streams generated by air-blown and oxygen-blown commercial and pilot-scale coal gasifiers (the CO{sub 2} partial pressure in these gas streams is significantly different, which directly impacts the operating conditions hence the performance of the sorbent). To support the field demonstration work, TDA collaborated with Phillips 66 and Southern Company to carry out two separate field tests using actual coal-derived synthesis gas at the Wabash River IGCC Power Plant in Terre Haute, IN and the National Carbon Capture Center (NCCC) in Wilsonville, AL. In collaboration with the University of California, Irvine (UCI), a detailed engineering and economic analysis for the new CO{sub 2} capture system was also proposed to be carried out using Aspen PlusTM simulation software, and estimate its effect on the plant efficiency.

  19. Secured Data Encoding Technique in High Capacity Color Barcodes for M-Ticket Application

    Directory of Open Access Journals (Sweden)

    B. Akila

    2013-01-01

    Full Text Available This research aim is to increase the capacity of barcode (i.e. Number of data bits embedded inside barcode will be increased by encoding data through orientation modulation in elliptical dot array. BARCODES that encode digital data on physical media are commonly utilized in commercial applications for tracing/tracking of trade items, in security applications for linking personal documents with a user, or in other applications as an auxiliary channel to encode additional information on a physical medium. which are fundamentally analog, these methods can add security and functionality and features that are associated with digital techniques at the expense of consuming space on the media. For instance, in personal IDs, driving licenses and passports, high capacity can enable the encoding of a sample speech signal, a picture, or other identifying personal information which in turn may be used to establish authenticity of the user. Care must, however, be exercised in designing color barcodes to ensure that they are robust to variations in the color printing and scanning processes, which have a greater impact when considering color rather than black/white reproduction and capture.2D bar codes are being considered for new emerging applications such as M-ticketing, where they carry selected information of a ticket that is received via a mobile phone; reliable and secure personal identification, where they store personal biometric data on the identification document; and visual communications with side information, where they can be used as an auxiliary channel conveying additional data for improving visual communications.

  20. High-Capacity Layered-Spinel Cathodes for Li-Ion Batteries.

    Science.gov (United States)

    Nayak, Prasant Kumar; Levi, Elena; Grinblat, Judith; Levi, Mikhael; Markovsky, Boris; Munichandraiah, N; Sun, Yang Kook; Aurbach, Doron

    2016-09-08

    Li and Mn-rich layered oxides with the general structure x Li2 MnO3 ⋅(1-x) LiMO2 (M=Ni, Mn, Co) are promising cathode materials for Li-ion batteries because of their high specific capacity, which may be greater than 250 mA h g(-1) . However, these materials suffer from high first-cycle irreversible capacity, gradual capacity fading, limited rate capability and discharge voltage decay upon cycling, which prevent their commercialization. The decrease in average discharge voltage is a major issue, which is ascribed to a structural layered-to-spinel transformation upon cycling of these oxide cathodes in wide potential ranges with an upper limit higher than 4.5 V and a lower limit below 3 V versus Li. By using four elements systems (Li, Mn, Ni, O) with appropriate stoichiometry, it is possible to prepare high capacity composite cathode materials that contain LiMn1.5 Ni0.5 O4 and Lix Mny Niz O2 components. The Li and Mn-rich layered-spinel cathode materials studied herein exhibit a high specific capacity (≥200 mA h g(-1) ) with good capacity retention upon cycling in a wide potential domain (2.4-4.9 V). The effect of constituent phases on their electrochemical performance, such as specific capacity, cycling stability, average discharge voltage, and rate capability, are explored here. This family of materials can provide high specific capacity, high rate capability, and promising cycle life. Using Co-free cathode materials is also an obvious advantage of these systems.

  1. IRON CHELATION THERAPY IN THALASSEMIA SYNDROMES

    Directory of Open Access Journals (Sweden)

    Paolo Cianciulli

    2009-06-01

    Full Text Available Transfusional hemosiderosis is a frequent complication in patients with transfusion dependent chronic diseases such as  thalassemias and severe type of sickle cell diseases. As there are no physiological mechanisms to excrete the iron contained in transfused red cells (1 unit of blood contains approximately 200 mg of iron the excess of iron is stored in various organs. Cardiomyopathy is the most severe complication covering more than 70% of the causes of death of thalassemic patients. Although the current reference standard iron chelator deferoxamine (DFO has been used clinically for over four decades, its effectiveness is limited by a demanding therapeutic regimen that leads to poor compliance. Despite poor compliance, because of the inconvenience of subcutaneous infusion, DFO improved considerably the survival and quality of life of patients with thalassemia. Deferiprone since 1998 and Deferasirox since 2005 were licensed for clinical use. The oral chelators have a better compliance because of oral use, a comparable efficacy to DFO in iron excretion and probably a better penetration to myocardial cells. Considerable increase in iron excretion was documented with combination therapy of DFO and Deferiprone. The proper use of the three chelators will improve the prevention and treatment of iron overload, it will reduce  complications, and improve survival and quality of life of transfused patients

  2. Binders and Hosts for High-Capacity Lithium-ion Battery Anodes

    Science.gov (United States)

    Dufficy, Martin Kyle

    Lithium-ion batteries (LIBs) are universal electrochemical energy storage devices that have revolutionized our mobile society. Nonetheless, societal and technological advances drive consumer demand for LIBs with enhanced electrochemical performance, such as higher charge capacity and longer life, compared to conventional LIBs. One method to enhance LIB performance is to replace graphite, the industry standard anode since commercialization of LIBs in 1991, with high-charge capacity materials. Implementing high-capacity anode materials such as tin, silicon, and manganese vanadates, to LIBs presents challenges; Li-insertion is destructive to anode framework, and increasing capacity increases structural strains that pulverize anode materials and results in a short-cycle life. This thesis reports on various methods to extended the cycle life of high-capacity materials. Most of the work is conducted on nano-sized anode materials to reduce Li and electron transport pathway length (facilitating charge-transfer) and reduce strains from volume expansions (preserving anode structure). The first method involves encapsulating tin particles into a graphene-containing carbon nanofiber (CNF) matrix. The composite-CNF matrix houses tin particles to assume strains from tin-volume expansions and produces favorable surface-electrolyte chemistries for stable charge-discharge cycling. Before tin addition, graphene-containing CNFs are produced and assessed as anode materials for LIBs. Graphene addition to CNFs improves electronic and mechanical properties of CNFs. Furthermore, the 2-D nature of graphene provides Li-binding sites to enhance composite-CNF both first-cycle and high-rate capacities > 150% when compared to CNFs in the absence of graphene. With addition of Sn, we vary loadings and thermal production temperature to elucidate structure-composition relationships of tin and graphene-containing CNF electrodes that lead to increased capacity retention. Of note, electrodes containing

  3. Technology Assessment of High Capacity Data Storage Systems: Can We Avoid a Data Survivability Crisis?

    Science.gov (United States)

    Halem, M.; Shaffer, F.; Palm, N.; Salmon, E.; Raghavan, S.; Kempster, L.

    1998-01-01

    This technology assessment of long-term high capacity data storage systems identifies an emerging crisis of severe proportions related to preserving important historical data in science, healthcare, manufacturing, finance and other fields. For the last 50 years, the information revolution, which has engulfed all major institutions of modem society, centered itself on data-their collection, storage, retrieval, transmission, analysis and presentation. The transformation of long term historical data records into information concepts, according to Drucker, is the next stage in this revolution towards building the new information based scientific and business foundations. For this to occur, data survivability, reliability and evolvability of long term storage media and systems pose formidable technological challenges. Unlike the Y2K problem, where the clock is ticking and a crisis is set to go off at a specific time, large capacity data storage repositories face a crisis similar to the social security system in that the seriousness of the problem emerges after a decade or two. The essence of the storage crisis is as follows: since it could take a decade to migrate a peta-byte of data to a new media for preservation, and the life expectancy of the storage media itself is only a decade, then it may not be possible to complete the transfer before an irrecoverable data loss occurs. Over the last two decades, a number of anecdotal crises have occurred where vital scientific and business data were lost or would have been lost if not for major expenditures of resources and funds to save this data, much like what is happening today to solve the Y2K problem. A pr-ime example was the joint NASA/NSF/NOAA effort to rescue eight years worth of TOVS/AVHRR data from an obsolete system, which otherwise would have not resulted in the valuable 20-year long satellite record of global warming. Current storage systems solutions to long-term data survivability rest on scalable architectures

  4. The catalytic reactions in the Cu-Li-Mg-H high capacity hydrogen storage system.

    Science.gov (United States)

    Braga, M H; El-Azab, A

    2014-11-14

    A family of hydrides, including the high capacity MgH2 and LiH, is reported. The disadvantages these hydrides normally display (high absorption/desorption temperatures and poor kinetics) are mitigated by Cu-hydride catalysis. This paper reports on the synthesis of novel CuLi0.08Mg1.42H4 and CuLi0.08Mg1.92H5 hydrides, which are structurally and thermodynamically characterized for the first time. The CuLi0.08Mg1.42H4 hydride structure in nanotubes is able to hold molecular H2, increasing the gravimetric and volumetric capacity of this compound. The catalytic effect these compounds show on hydride formation and decomposition of CuMg2 and Cu2Mg/MgH2, Li and LiH, Mg and MgH2 is analyzed. The Gibbs energy, decomposition temperature, and gravimetric capacity of the reactions occurring within the Cu-Li-Mg-H system are presented for the first time. First principles and phonon calculations are compared with experiments, including neutron spectroscopy. It is demonstrated that the most advantageous sample contains CuLi0.08Mg1.92 and (Li) ∼ Li2Mg3; it desorbs/absorbs hydrogen according to the reaction, 2CuLi0.08Mg1.42H4 + 2Li + 4MgH2 ↔ 2CuLi0.08Mg1.92 + Li2Mg3 + 8H2 at 114 °C (5.0 wt%) - 1 atm, falling within the proton exchange membrane fuel cell applications window. Finally the reaction 2CuLi0.08Mg1.42H4 + MgH2 ↔ 2CuLi0.08Mg1.92 + 5H2 at 15 °C (4.4 wt%) - 1 atm is found to be the main reaction of the samples containing CuLi0.08Mg1.92 that were analyzed in this study.

  5. Novel Terbium Chelate Doped Fluorescent Silica Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    Ning Qiaoyu; Meng Jianxin; Wang Haiming; Liu Yingliang; Man Shiqing

    2006-01-01

    Novel terbium chelate doped silica fluorescent nanoparticles were prepared and characterized.The preparation was carried out in water-in-oil (W/O) microemulsion containing monomer precursor (pAB-DTPAA-APTEOS), Triton X-100, n-hexanol, and cyclohexane by controlling copolymerization of tetraethyl orthosilicate and 3-aminopropyl-triethyloxysilane.The nanoparticles are spherical and uniform in size, about 30 nm in diameter, strongly fluorescent, and highly stable.The amino groups directly introduced to the surface of the nanoparticles using APTEOS during preparation made the surface modification and bioconjugation of the nanoparticles easier.The nanoparticles are expected as an efficient time-resolved luminescence biological label.

  6. SLC2A9 is a high-capacity urate transporter in humans.

    Directory of Open Access Journals (Sweden)

    Mark J Caulfield

    2008-10-01

    0.98, 95% confidence interval [CI] 0.9 to 1.05, p > 0.33 by meta-analysis of an SLC2A9 variant in six case-control studies including 11,897 participants. In a separate meta-analysis of four population studies including 11,629 participants we found no association of SLC2A9 with systolic (effect size -0.12 mm Hg, 95% CI -0.68 to 0.43, p = 0.664 or diastolic blood pressure (effect size -0.03 mm Hg, 95% CI -0.39 to 0.31, p = 0.82. CONCLUSIONS: This study provides evidence that SLC2A9 splice variants act as high-capacity urate transporters and is one of the first functional characterisations of findings from genome-wide association scans. We did not find an association of the SLC2A9 gene with blood pressure in this study. Our findings suggest potential pathogenic mechanisms that could offer a new drug target for gout.

  7. Morphology control of ordered mesoporous carbons for high capacity lithium sulfur batteries

    Energy Technology Data Exchange (ETDEWEB)

    Schuster, Joerg David

    2011-06-07

    The focus of this thesis concerns the morphology control of ordered mesoporous carbon (OMC) materials. Ordered mesoporous carbons with diverse morphologies, that are thin films, fibers - embedded in anodic alumina membranes and free-standing - or spherical nanoparticles, have been successfully prepared by soft-templating procedures. The mechanisms of structure formation and processing were investigated with in-situ SAXS measurements and their application in high capacity lithium-sulfur batteries was successfully tested in cooperation with Guang He and Linda Nazar from the University of Waterloo in Canada. The Li-S batteries receive increasing attention due to their high theoretical energy density which is 3 to 5 times higher than from lithium-ion batteries. For this type of battery the specific pore volume is crucial for the content of the active component (sulfur) in the cathode and therefore correlates with the capacity and gravimetric energy density of the battery. At first, mesoporous thin films with 2D-hexagonal structure were obtained through organic-organic self-assembly of a preformed oligomeric resol precursor and the triblock copolymer template Pluronic P123. The formation of a condensed-wall material through thermopolymerization of the precursor oligomers resulted in mesostructured phenolic resin films. Subsequent decomposition of the surfactant and partial carbonization were achieved through thermal treatment in inert atmosphere. The films were crack-free with tunable homogenous thicknesses, and showed either 2D-hexagonal or lamellar mesostructure. An additional, yet unknown 3D-mesostructure was also found. In the second part, cubic and circular hexagonal mesoporous carbon phases in the confined environment of tubular anodic alumina membrane (AAM) pores were obtained by self-assembly of the mentioned resol precursor and the triblock copolymer templates Pluronic F127 or P123, respectively. Casting and solvent-evaporation were also followed by

  8. Progress on Study of Luminescence of Rare Earth Organic Chelates

    Institute of Scientific and Technical Information of China (English)

    杨燕生; 安保礼; 龚孟濂; 史华红; 雷衡毅; 孟建新

    2002-01-01

    Based on the investigation of the luminescence of a series of rare earth organic chelates, some relationships between luminescence and the structure of the chelates were proposed: the intensity of sensitized luminescence of central lanthanide ions(Ln3+) in a rare earth organic chelate depends on (1)the suitability of the energy gap between the excited triplet energy level of the ligands and the lowest excited energy level of Ln3+ ions; (2)the rigidity and planarity of the structure of the chelate molecule; (3)the existence of a suitable secondary ligand which may increase rigidity and the stability of the chelate molecule; and (4) the existence of a suitable π-conjugated system in the chelate molecule. According to the above relationships, 25 novel organic ligands were designed and synthesized, and their lanthanide chelates were prepared. Investigation of the photoluminescence for the new chelates shows that some of the chelates are strongly luminescent, and are applied to fluoroimmunoassay for determination of human immunoglobulin(IgG), to preparation of fluorescent plastics, and to determination of growth hormone for plants. Two novel spectroscopy-probe techniques for structure of coordination compounds and biological molecules were proposed and developed based on vibronic spectroscopy of Tb3+ complexes and fluorescence of Ce3+.

  9. Metal regeneration of iron chelates in nitric oxide scrubbing

    Science.gov (United States)

    Chang, S.G.; Littlejohn, D.; Shi, Y.

    1997-08-19

    The present invention relates to a process of using metal particles to reduce NO to NH{sub 3}. More specifically, the invention concerns an improved process to regenerate iron (II) (CHELATE) by reduction of iron (II) (CHELATE) (NO) complex, which process comprises: (a) contacting an aqueous solution containing iron (II) (CHELATE) (NO) with metal particles at between about 20 and 90 C to reduce NO present, produce ammonia or an ammonium ion, and produce free iron (II) (CHELATE) at a pH of between about 3 and 8. The process is useful to remove NO from flue gas and reduce pollution. 34 figs.

  10. Chelates of molybdenyl with o-hydroxyazomethines

    Energy Technology Data Exchange (ETDEWEB)

    Abramenko, V.L.; Garnovskii, A.D.; Surpina, L.V.; Kuzharov, A.S.

    1986-05-01

    Chelates of dioxomolybdenum(VI) with Schiff bases derived from salicylaldehyde and aliphatic, aromatic, and heterocyclic amines and diamines have been synthesized by ligand exchange and template synthesis methods. Complexes with the general formula MoO/sub 2/L/sub 2/ form of N-alkyl- and N-arylsalicylidenimines (HL). Chelates with molybdenum-ligand ratios equal to 1:1 and 1:2 are realized with heterocyclic azomethines. Bis(salicylidene) diimines form only complexes with a 1:1 composition. The compounds isolated are finely crystalline substances, which predominantly have a yellow color and limited solubility in methanol and dimethyl sulfoxide. On the basis of data from conductometry, UV, IR, and /sup 1/H NMR spectroscopy it has been postulated that the complexes have an octahedral structure with maintenance of the cis configuration of the MoO/sub 2/ group. A dimeric or polymeric structure has been proposed for the 1:1 complexes. The thermal decomposition of the azomethine complexes of molybdenum(VI) under dynamic conditions takes place in two stages and ultimately results in the formation of MoO/sub 3/.

  11. Myelodysplastic Syndromes and Iron Chelation Therapy

    Science.gov (United States)

    Angelucci, Emanuele; Urru, Silvana Anna Maria; Pilo, Federica; Piperno, Alberto

    2017-01-01

    Over recent decades we have been fortunate to witness the advent of new technologies and of an expanded knowledge and application of chelation therapies to the benefit of patients with iron overload. However, extrapolation of learnings from thalassemia to the myelodysplastic syndromes (MDS) has resulted in a fragmented and uncoordinated clinical evidence base. We’re therefore forced to change our understanding of MDS, looking with other eyes to observational studies that inform us about the relationship between iron and tissue damage in these subjects. The available evidence suggests that iron accumulation is prognostically significant in MDS, but levels of accumulation historically associated with organ damage (based on data generated in the thalassemias) are infrequent. Emerging experimental data have provided some insight into this paradox, as our understanding of iron-induced tissue damage has evolved from a process of progressive bulking of organs through high-volumes iron deposition, to one of ‘toxic’ damage inflicted through multiple cellular pathways. Damage from iron may, therefore, occur prior to reaching reference thresholds, and similarly, chelation may be of benefit before overt iron overload is seen. In this review, we revisit the scientific and clinical evidence for iron overload in MDS to better characterize the iron overload phenotype in these patients, which differs from the classical transfusional and non-transfusional iron overload syndrome. We hope this will provide a conceptual framework to better understand the complex associations between anemia, iron and clinical outcomes, to accelerate progress in this area. PMID:28293409

  12. Integration of high capacity materials into interdigitated mesostructured electrodes for high energy and high power density primary microbatteries

    Science.gov (United States)

    Pikul, James H.; Liu, Jinyun; Braun, Paul V.; King, William P.

    2016-05-01

    Microbatteries are increasingly important for powering electronic systems, however, the volumetric energy density of microbatteries lags behind that of conventional format batteries. This paper reports a primary microbattery with energy density 45.5 μWh cm-2 μm-1 and peak power 5300 μW cm-2 μm-1, enabled by the integration of large volume fractions of high capacity anode and cathode chemistry into porous micro-architectures. The interdigitated battery electrodes consist of a lithium metal anode and a mesoporous manganese oxide cathode. The key enabler of the high energy and power density is the integration of the high capacity manganese oxide conversion chemistry into a mesostructured high power interdigitated bicontinuous cathode architecture and an electrodeposited dense lithium metal anode. The resultant energy density is greater than previously reported three-dimensional microbatteries and is comparable to commercial conventional format lithium-based batteries.

  13. Lithographically encoded polymer microtaggant using high-capacity and error-correctable QR code for anti-counterfeiting of drugs.

    Science.gov (United States)

    Han, Sangkwon; Bae, Hyung Jong; Kim, Junhoi; Shin, Sunghwan; Choi, Sung-Eun; Lee, Sung Hoon; Kwon, Sunghoon; Park, Wook

    2012-11-20

    A QR-coded microtaggant for the anti-counterfeiting of drugs is proposed that can provide high capacity and error-correction capability. It is fabricated lithographically in a microfluidic channel with special consideration of the island patterns in the QR Code. The microtaggant is incorporated in the drug capsule ("on-dose authentication") and can be read by a simple smartphone QR Code reader application when removed from the capsule and washed free of drug.

  14. Morphology control of ordered mesoporous carbons for high capacity lithium sulfur batteries

    Energy Technology Data Exchange (ETDEWEB)

    Schuster, Joerg David

    2011-06-07

    The focus of this thesis concerns the morphology control of ordered mesoporous carbon (OMC) materials. Ordered mesoporous carbons with diverse morphologies, that are thin films, fibers - embedded in anodic alumina membranes and free-standing - or spherical nanoparticles, have been successfully prepared by soft-templating procedures. The mechanisms of structure formation and processing were investigated with in-situ SAXS measurements and their application in high capacity lithium-sulfur batteries was successfully tested in cooperation with Guang He and Linda Nazar from the University of Waterloo in Canada. The Li-S batteries receive increasing attention due to their high theoretical energy density which is 3 to 5 times higher than from lithium-ion batteries. For this type of battery the specific pore volume is crucial for the content of the active component (sulfur) in the cathode and therefore correlates with the capacity and gravimetric energy density of the battery. At first, mesoporous thin films with 2D-hexagonal structure were obtained through organic-organic self-assembly of a preformed oligomeric resol precursor and the triblock copolymer template Pluronic P123. The formation of a condensed-wall material through thermopolymerization of the precursor oligomers resulted in mesostructured phenolic resin films. Subsequent decomposition of the surfactant and partial carbonization were achieved through thermal treatment in inert atmosphere. The films were crack-free with tunable homogenous thicknesses, and showed either 2D-hexagonal or lamellar mesostructure. An additional, yet unknown 3D-mesostructure was also found. In the second part, cubic and circular hexagonal mesoporous carbon phases in the confined environment of tubular anodic alumina membrane (AAM) pores were obtained by self-assembly of the mentioned resol precursor and the triblock copolymer templates Pluronic F127 or P123, respectively. Casting and solvent-evaporation were also followed by

  15. A High-Capacity Adenoviral Hybrid Vector System Utilizing the Hyperactive Sleeping Beauty Transposase SB100X for Enhanced Integration.

    Science.gov (United States)

    Boehme, Philip; Zhang, Wenli; Solanki, Manish; Ehrke-Schulz, Eric; Ehrhardt, Anja

    2016-07-19

    For efficient delivery of required genetic elements we utilized high-capacity adenoviral vectors in the past allowing high transgene capacities of up to 36 kb. Previously we explored the hyperactive Sleeping Beauty (SB) transposase (HSB5) for somatic integration from the high-capacity adenoviral vectors genome. To further improve this hybrid vector system we hypothesized that the previously described hyperactive SB transposase SB100X will result in significantly improved efficacies after transduction of target cells. Plasmid based delivery of the SB100X system revealed significantly increased integration efficiencies compared with the previously published hyperactive SB transposase HSB5. After optimizing experimental setups for high-capacity adenoviral vectors-based delivery of the SB100X system we observed up to eightfold and 100-fold increased integration efficiencies compared with the previously published hyperactive SB transposase HSB5 and the inactive transposase mSB, respectively. Furthermore, transposon copy numbers per cell were doubled with SB100X compared with HSB5 when using the identical multiplicity of infection. We believe that this improved hybrid vector system represents a valuable tool for achieving stabilized transgene expression in cycling cells and for treatment of numerous genetic disorders. Especially for in vivo approaches this improved adenoviral hybrid vector system will be advantageous because it may potentially allow reduction of the applied viral dose.

  16. Dual-Size Silicon Nanocrystal-Embedded SiO(x) Nanocomposite as a High-Capacity Lithium Storage Material.

    Science.gov (United States)

    Park, Eunjun; Yoo, Hyundong; Lee, Jaewoo; Park, Min-Sik; Kim, Young-Jun; Kim, Hansu

    2015-07-28

    SiOx-based materials attracted a great deal of attention as high-capacity Li(+) storage materials for lithium-ion batteries due to their high reversible capacity and good cycle performance. However, these materials still suffer from low initial Coulombic efficiency as well as high production cost, which are associated with the complicated synthesis process. Here, we propose a dual-size Si nanocrystal-embedded SiOx nanocomposite as a high-capacity Li(+) storage material prepared via cost-effective sol-gel reaction of triethoxysilane with commercially available Si nanoparticles. In the proposed nanocomposite, dual-size Si nanocrystals are incorporated into the amorphous SiOx matrix, providing a high capacity (1914 mAh g(-1)) with a notably improved initial efficiency (73.6%) and stable cycle performance over 100 cycles. The highly robust electrochemical and mechanical properties of the dual-size Si nanocrystal-embedded SiOx nanocomposite presented here are mainly attributed to its peculiar nanoarchitecture. This study represents one of the most promising routes for advancing SiOx-based Li(+) storage materials for practical use.

  17. Anti-Oxidative, Metal Chelating and Radical Scavenging Effects of ...

    African Journals Online (AJOL)

    scavenging (6.93 mg/mL), iron chelating (116.4 µg/mL) and copper chelating activity (2136.9 µg/mL) ... optimum temperatures of each protease, namely ..... only due to their high abundance as well as their ... Oxidation and DNA Damage.

  18. Potentials and drawbacks of chelate-enhanced phytoremediation of soils

    NARCIS (Netherlands)

    Römkens, P.F.A.M.; Bouwman, L.A.; Japenga, J.; Draaisma, C.

    2002-01-01

    Chelate-enhanced phytoremediation has been proposed as an effective tool for the extraction of heavy metals from soils by plants. However, side-effects related to the addition of chelates, e.g. metal leaching and effects on soil micro-organisms, were usually neglected. Therefore, greenhouse and

  19. Chelation Treatment for Autism Spectrum Disorders: A Systematic Review

    Science.gov (United States)

    Davis, Tonya N.; O'Reilly, Mark; Kang, Soyeon; Lang, Russell; Rispoli, Mandy; Sigafoos, Jeff; Lancioni, Giulio; Copeland, Daelynn; Attai, Shanna; Mulloy, Austin

    2013-01-01

    Chelation treatment is used to eliminate specific metals from the body, such as mercury. It has been hypothesized that mercury poisoning may be a factor in autism and data suggest that perhaps 7% of individuals with autism spectrum disorder (ASD) have received chelation treatment. It would therefore seem timely to review studies investigating the…

  20. Potentials and drawbacks of chelate-enhanced phytoremediation of soils

    NARCIS (Netherlands)

    Römkens, P.F.A.M.; Bouwman, L.A.; Japenga, J.; Draaisma, C.

    2002-01-01

    Chelate-enhanced phytoremediation has been proposed as an effective tool for the extraction of heavy metals from soils by plants. However, side-effects related to the addition of chelates, e.g. metal leaching and effects on soil micro-organisms, were usually neglected. Therefore, greenhouse and lysi

  1. Enhanced immune response and protective effects of nano-chitosan-based DNA vaccine encoding T cell epitopes of Esat-6 and FL against Mycobacterium tuberculosis infection.

    Directory of Open Access Journals (Sweden)

    Ganzhu Feng

    Full Text Available Development of a novel and effective vaccine against Mycobacterium tuberculosis (M.tb is a challenging for preventing TB infection. In this study, a novel nanoparticle-based recombinant DNA vaccine was developed, which contains Esat-6 three T cell epitopes (Esat-6/3e and fms-like tyrosine kinase 3 ligand (FL genes (termed Esat-6/3e-FL, and was enveloped with chitosan (CS nanoparticles (nano-chitosan. The immunologic and protective efficacy of the nano-chitosan-based DNA vaccine (termed nano-Esat-6/3e-FL was assessed in C57BL/6 mice after intramuscular prime vaccination with the plasmids DNA and nasal boost with the Esat-6/3e peptides. The results showed that the immunized mice remarkably elicited enhanced T cell responses and protection against M.tb H37Rv challenge. These findings indicate that the nano-chitosan can significantly elevate the immunologic and protective effects of the DNA vaccine, and the nano-Esat-6/3e-FL is a useful vaccine for preventing M.tb infection in mice.

  2. Plasma-initiated polymerization of chitosan-based CS-g-P(AM-DMDAAC) flocculant for the enhanced flocculation of low-algal-turbidity water.

    Science.gov (United States)

    Sun, Yongjun; Zhu, Chengyu; Sun, Wenquan; Xu, Yanhua; Xiao, Xuefeng; Zheng, Huaili; Wu, Huifang; Liu, Cuiyun

    2017-05-15

    In this work, a highly efficient and environmentally friendly chitosan-based graft flocculant, namely, acrylamide- and dimethyl diallyl ammonium chloride-grafted chitosan [CS-g-P(AM-DMDAAC)], was prepared successfully through plasma initiation. FTIR results confirmed the successful polymerization of CS-g-P(AM-DMDAAC) and P(AM-DMDAAC). P(AM-DMDAAC) was the copolymer of acrylamide- and dimethyl diallyl ammonium chloride. SEM results revealed that a densely cross-linked network structure formed on the surface. XRD results verified that the ordered crystal structure of chitosan in CS-g-P(AM-DMDAAC) was changed into an amorphous structure after plasma-induced polymerization. The flocculation results of low-algal-turbidity water further showed the optimal flocculation efficiency of turbidity removal rate, COD removal rate, and Chl-a removal rate were 99.02%, 96.11%, and 92.20%, respectively. The flocculation efficiency of CS-g-P(AM-DMDAAC) were significantly higher than those obtained by cationic polyacrylamide (CPAM) and Polymeric aluminum and iron (PAFC). This work provided a valuable basis for the design of eco-friendly naturally modified polymeric flocculants to enhance the flocculation of low-algal-turbidity water. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Modeling and optimization of the flocculation processes for removal of cationic and anionic dyes from water by an amphoteric grafting chitosan-based flocculant using response surface methodology.

    Science.gov (United States)

    Wu, Hu; Yang, Ran; Li, Ruihua; Long, Chao; Yang, Hu; Li, Aimin

    2015-09-01

    In this study, an amphoteric grafting chitosan-based flocculant (carboxymethyl chitosan-graft-poly(2-methacryloyloxyethyl) trimethyl ammonium chloride, denoted as CMC-g-PDMC) was applied to removal of the anionic and cationic dyes, acid Green 25 (AG25) and Basic Bright Yellow (7GL), from water. Flocculation conditions have been optimized by response surface methodology (RSM) on the basis of central composite design (CCD) using flocculant dosage, initial solution pH and temperature as input variables. The second-order and cubic regression models, which have been both tested by the analysis of variance (ANOVA), were constructed to link the output response (the dye removal factor) with the aforementioned input variables, respectively. The second-order regression model well described the process of AG25 removal, whereas the cubic one is more suitable for that of 7GL. The effects of those variables on the flocculation performance of CMC-g-PDMC for removal of the two dyes containing opposite charges from aqueous solutions have been studied, and the flocculation mechanisms including the interactive effects between various influencing factors have been discussed in detail also.

  4. Luminescence of a conjugated polymer containing europium (III) chelate

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Hao; Xie, Fang, E-mail: xiefang4498@126.com

    2013-12-15

    A europium (III) chelate has been incorporated in a conjugated polymer, poly-[2,2′-bipyridine-5,5′-diyl-(2,5-dihexyl-1,4-phenylene)]. From the absorbance and emission spectra measurement and using the Judd–Ofelt theory, an efficient energy transfer between the conjugated polymer and the europium (III) chelate has been confirmed. The luminescence lifetime of Eu{sup 3+} ion in the conjugated polymer is 0.352 ms and the emission cross section of this material is 3.11×10{sup −21} cm{sup 2}. -- Highlights: • A europium chelate has been incorporated in a conjugated polymer. • Energy transfer in the conjugated polymer containing europium chelate is efficient. • The conjugated polymer containing europium chelate is a promising optical material.

  5. Quantitative measurement of metal chelation by fourier transform infrared spectroscopy

    Directory of Open Access Journals (Sweden)

    Monika E. Miller

    2015-12-01

    Full Text Available Nutritionally important minerals are more readily absorbed by living systems when complexed with organic acids, resulting in higher consumer demand and premium prices for these products. These chelated metals are produced by reaction of metal oxides and acids in aqueous solution. However, unreacted dry blends are sometimes misrepresented as metal chelates, when in reality they are only simple mixtures of the reactants typically used to synthesize them. This practice has increased interest in developing analytical methods that are capable of measuring the extent of metal chelation for quality control and regulatory compliance. We describe a novel method to rapidly measure the percent chelation of citric and malic acids with calcium, magnesium, and zinc. Utilization of attenuated total reflectance (FTIR-ATR provides for the direct, rapid measurement of solid samples. The inclusion of an internal standard allows independent determination of either free or chelated acids from integrated areas in a single spectrum.

  6. Treating Lead Toxicity: Possibilities beyond Synthetic Chelation

    Directory of Open Access Journals (Sweden)

    Shambhavi Tannir

    2013-01-01

    Full Text Available Lead, a ubiquitous metal, is one of the most abundant elements present on earth. Its easy availability and cost effectiveness made it an extremely popular component in the industrial revolution. However, its hazardous health effects were not considered at the time. Over the last few decades, with the adverse effects of lead coming to the forefront, nations across the world have started to recognize and treat lead toxicity. The most reliable and used method until now has been chelation therapy. Recent research has suggested the use of natural products and sources to treat lead poisoning with minimal or no side effects. This review has tried to summarize a few of the natural products/sources being investigated by various groups.

  7. Chelating ionic liquids for reversible zinc electrochemistry.

    Science.gov (United States)

    Kar, Mega; Winther-Jensen, Bjorn; Forsyth, Maria; MacFarlane, Douglas R

    2013-05-21

    Advanced, high energy-density, metal-air rechargeable batteries, such as zinc-air, are of intense international interest due to their important role in energy storage applications such as electric and hybrid vehicles, and to their ability to deal with the intermittency of renewable energy sources such as solar and wind. Ionic liquids offer a number of ideal thermal and physical properties as potential electrolytes in such large-scale energy storage applications. We describe here the synthesis and characterisation of a family of novel "chelating" ILs designed to chelate and solubilize the zinc ions to create electrolytes for this type of battery. These are based on quaternary alkoxy alkyl ammonium cations of varying oligo-ether side chains and anions such as p-toluene sulfonate, bis(trifluoromethylsulfonyl)amide and dicyanoamides. This work shows that increasing the ether chain length in the cation from two to four oxygens can increase the ionic conductivity and reduce the melting point from 67 °C to 15 °C for the tosylate system. Changing the anion also plays a significant role in the nature of the zinc deposition electrochemistry. We show that zinc can be reversibly deposited from [N(222(20201))][NTf2] and [N(222(202020201))][NTf2] beginning at -1.4 V and -1.7 V vs. SHE, respectively, but not in the case of tosylate based ILs. This indicates that the [NTf2] is a weaker coordinating anion with the zinc cation, compared to the tosylate anion, allowing the coordination of the ether chain to dominate the behavior of the deposition and stripping of zinc ions.

  8. Relationship between conformational flexibility and chelate cooperativity.

    Science.gov (United States)

    Misuraca, M Cristina; Grecu, Tudor; Freixa, Zoraida; Garavini, Valentina; Hunter, Christopher A; van Leeuwen, Piet W N M; Segarra-Maset, M Dolores; Turega, Simon M

    2011-04-15

    A family of four biscarbamates (AA) and four bisphenols (DD) were synthesized, and H-bonding interactions between all AA•DD combinations were characterized using (1)H NMR titrations in carbon tetrachloride. A chemical double mutant cycle analysis shows that there are no secondary electrostatic interactions or allosteric cooperativity in these systems, and the system therefore provides an ideal platform for investigating the relationship between chemical structure and chelate cooperativity. Effective molarities (EMs) were measured for 12 different systems, where the number of rotors in the chains connecting the two H-bond sites was varied from 5 to 20. The association constants vary by less than an order of magnitude for all 12 complexes, and the variation in EM is remarkably small (0.1-0.9 M). The results provide a relationship between EM and the number of rotors in the connecting chains (r): EM ≈ 10r(-3/2). The value of 10 M is the upper limit for the value of EM for a noncovalent intramolecular interaction. Introduction of rotors reduces the value of EM from this maximum in accord with a random walk analysis of the encounter probability of the chain ends (r(-3/2)). Noncovalent EMs never reach the very high values observed for covalent processes, which places limitations on the magnitudes of the effects that one is likely to achieve through the use of chelate cooperativity in supramolecular assembly and catalysis. On the other hand, the decrease in EM due to the introduction of conformational flexibility is less dramatic than one might expect based on the behavior of covalent systems, which limits the losses in binding affinity caused by poor preorganization of the interaction sites.

  9. Fixation kinetics of chelated and non-chelated zinc in semi-arid alkaline soils: application to zinc management

    Science.gov (United States)

    Udeigwe, Theophilus K.; Eichmann, Madeleine; Menkiti, Matthew C.

    2016-07-01

    This study was designed to examine the fixation pattern and kinetics of zinc (Zn) in chelated (ethylenediaminetetraacetic acid, EDTA) and non-chelated mixed micronutrient systems of semi-arid alkaline soils from the Southern High Plains, USA. Soils were characterized for a suite of chemical and physical properties and data obtained from extraction experiments fitted to various kinetic models. About 30 % more plant-available Zn was fixed in the non-chelated system within the first 14 days with only about 18 % difference observed between the two systems by day 90, suggesting that the effectiveness of the chelated compounds tended to decrease over time. The strengths of the relationships of change in available Zn with respect to other micronutrients (copper, iron, and manganese) were higher and more significant in the non-chelated system (average R2 of 0.83), compared to the chelated (average R2 of 0.42). Fixation of plant-available Zn was best described by the power-function model (R2 = 0.94, SE = 0.076) in the non-chelated system, and was poorly described by all the models examined in the chelated system. Reaction rate constants and relationships generated from this study can serve as important tools for micronutrient management and for future micronutrient modeling studies on these soils and other semi-arid regions of the world.

  10. DNA nuclease activity of Rev-coupled transition metal chelates.

    Science.gov (United States)

    Joyner, Jeff C; Keuper, Kevin D; Cowan, J A

    2012-06-07

    Artificial nucleases containing Rev-coupled metal chelates based on combinations of the transition metals Fe(2+), Co(2+), Ni(2+), and Cu(2+) and the chelators DOTA, DTPA, EDTA, NTA, tripeptide GGH, and tetrapeptide KGHK have been tested for DNA nuclease activity. Originally designed to target reactive transition metal chelates (M-chelates) to the HIV-1 Rev response element mRNA, attachment to the arginine-rich Rev peptide also increases DNA-binding affinity for the attached M-chelates. Apparent K(D) values ranging from 1.7 to 3.6 µM base pairs for binding of supercoiled pUC19 plasmid DNA by Ni-chelate-Rev complexes were observed, as a result of electrostatic attraction between the positively-charged Rev peptide and negatively-charged DNA. Attachment of M-chelates to the Rev peptide resulted in enhancements of DNA nuclease activity ranging from 1-fold (no enhancement) to at least 13-fold (for Cu-DTPA-Rev), for the rate of DNA nicking, with second order rate constants for conversion of DNA(supercoiled) to DNA(nicked) up to 6 × 10(6) M(-1) min(-1), and for conversion of DNA(nicked) to DNA(linear) up to 1 × 10(5) M(-1) min(-1). Freifelder-Trumbo analysis and the ratios of linearization and nicking rate constants (k(lin)/k(nick)) revealed concerted mechanisms for nicking and subsequent linearization of plasmid DNA for all of the Rev-coupled M-chelates, consistent with higher DNA residency times for the Rev-coupled M-chelates. Observed rates for Rev-coupled M-chelates were less skewed by differing DNA-binding affinities than for M-chelates lacking Rev, as a result of the narrow range of DNA-binding affinities observed, and therefore relationships between DNA nuclease activity and other catalyst properties, such as coordination unsaturation, the ability to consume ascorbic acid and generate diffusible radicals, and the identity of the metal center, are now clearly illustrated in light of the similar DNA-binding affinities of all M-chelate-Rev complexes. This work

  11. High capacity MnOx:ZrO2 sorbent for elementary mercury capture: preparation, characterization and comparison to other sorbents

    Science.gov (United States)

    Lakatos, J.; Snape, C. E.

    2017-02-01

    Manganese oxide-zirconia type (MnOx:ZrO2) sorbents were prepared using the sol-gel technique by co precipitation ZrO(NO3)2.xH2O and Mn(NO3)2 xH2O. The heat treatment below 500°C resulted a high surface area solid structure which consists of amorphous Mn2O3 (Bixbyite) and amorphous ZrO2 phases. This material was found a high capacity oxidative sorbent for mercury removal from gas streams.

  12. piggyBac as a high-capacity transgenesis and gene-therapy vector in human cells and mice

    Directory of Open Access Journals (Sweden)

    Rongbo Li

    2013-05-01

    The stable genomic integration and expression of a large transgene is a major hurdle in gene therapy. We show that the modified piggyBac (PB transposon system can be used to introduce a 207 kb genomic DNA fragment containing the RORγ/γt locus into human cells and mice. PB-mediated transgenesis results in a single copy of a stably inherited and expressed transgene. These results indicate that PB could serve as an effective high-capacity vector for functional analysis of the mammalian genome and for gene therapy in human cells.

  13. piggyBac as a high-capacity transgenesis and gene-therapy vector in human cells and mice

    OpenAIRE

    Rongbo Li; Yuan Zhuang; Min Han; Tian Xu; Xiaohui Wu

    2013-01-01

    SUMMARY The stable genomic integration and expression of a large transgene is a major hurdle in gene therapy. We show that the modified piggyBac (PB) transposon system can be used to introduce a 207 kb genomic DNA fragment containing the RORγ/γt locus into human cells and mice. PB-mediated transgenesis results in a single copy of a stably inherited and expressed transgene. These results indicate that PB could serve as an effective high-capacity vector for functional analysis of the mammalian ...

  14. Development of a new biofertilizer with a high capacity for N2 fixation, phosphate and potassium solubilization and auxin production.

    Science.gov (United States)

    Leaungvutiviroj, Chaveevan; Ruangphisarn, Pimtida; Hansanimitkul, Pikul; Shinkawa, Hidenori; Sasaki, Ken

    2010-01-01

    Biofertilizers that possess a high capacity for N(2) fixation (Azotobacter tropicalis), and consist of phosphate solubilizing bacteria (Burkhoderia unamae), and potassium solubilizing bacteria (Bacillus subtilis) and produce auxin (KJB9/2 strain), have a high potential for growth and yield enhancement of corn and vegetables (Chinese kale). For vegetables, the addition of biofertilizer alone enhanced growth 4 times. Moreover, an enhancement of growth by 7 times was observed due to the addition of rock phosphate and K-feldspar, natural mineral fertilizers, in combination with the biofertilizer.

  15. Nanoparticle and other metal chelation therapeutics in Alzheimer disease.

    Science.gov (United States)

    Liu, Gang; Garrett, Matthew R; Men, Ping; Zhu, Xiongwei; Perry, George; Smith, Mark A

    2005-09-25

    Current therapies for Alzheimer disease (AD) such as the anticholinesterase inhibitors and the latest NMDA receptor inhibitor, Namenda, provide moderate symptomatic delay at various stages of disease, but do not arrest disease progression or supply meaningful remission. As such, new approaches to disease management are urgently needed. Although the etiology of AD is largely unknown, oxidative damage mediated by metals is likely a significant contributor since metals such as iron, aluminum, zinc, and copper are dysregulated and/or increased in AD brain tissue and create a pro-oxidative environment. This role of metal ion-induced free radical formation in AD makes chelation therapy an attractive means of dampening the oxidative stress burden in neurons. The chelator desferioxamine, FDA approved for iron overload, has shown some benefit in AD, but like many chelators, it has a host of adverse effects and substantial obstacles for tissue-specific targeting. Other chelators are under development and have shown various strengths and weaknesses. In this review, we propose a novel system of chelation therapy through the use of nanoparticles. Nanoparticles conjugated to chelators show a unique ability to cross the blood-brain barrier (BBB), chelate metals, and exit through the BBB with their corresponding complexed metal ions. This method may prove to be a safe and effective means of reducing the metal load in neural tissue thus staving off the harmful effects of oxidative damage and its sequelae.

  16. Nanoparticle and iron chelators as a potential novel Alzheimer therapy.

    Science.gov (United States)

    Liu, Gang; Men, Ping; Perry, George; Smith, Mark A

    2010-01-01

    Current therapies for Alzheimer disease (AD) such as the acetylcholinesterase inhibitors and the latest NMDA receptor inhibitor, Namenda, provide moderate symptomatic delay at various stages of the disease, but do not arrest the disease progression or bring in meaningful remission. New approaches to the disease management are urgently needed. Although the etiology of AD is largely unknown, oxidative damage mediated by metals is likely a significant contributor since metals such as iron, aluminum, zinc, and copper are dysregulated and/or increased in AD brain tissue and create a pro-oxidative environment. This role of metal ion-induced free radical formation in AD makes chelation therapy an attractive means of dampening the oxidative stress burden in neurons. The chelator desferrioxamine, FDA approved for iron overload, has shown some benefit in AD, but like many chelators, it has a host of adverse effects and substantial obstacles for tissue-specific targeting. Other chelators are under development and have shown various strengths and weaknesses. Here, we propose a novel system of chelation therapy through the use of nanoparticles. Nanoparticles conjugated to chelators show unique ability to cross the blood-brain barrier (BBB), chelate metals, and exit through the BBB with their corresponding complexed metal ions. This method may provide a safer and more effective means of reducing the metal load in neural tissue, thus attenuating the harmful effects of oxidative damage and its sequelae. Experimental procedures are presented in this chapter.

  17. Chelation: Harnessing and Enhancing Heavy Metal Detoxification—A Review

    Directory of Open Access Journals (Sweden)

    Margaret E. Sears

    2013-01-01

    Full Text Available Toxic metals such as arsenic, cadmium, lead, and mercury are ubiquitous, have no beneficial role in human homeostasis, and contribute to noncommunicable chronic diseases. While novel drug targets for chronic disease are eagerly sought, potentially helpful agents that aid in detoxification of toxic elements, chelators, have largely been restricted to overt acute poisoning. Chelation, that is multiple coordination bonds between organic molecules and metals, is very common in the body and at the heart of enzymes with a metal cofactor such as copper or zinc. Peptides glutathione and metallothionein chelate both essential and toxic elements as they are sequestered, transported, and excreted. Enhancing natural chelation detoxification pathways, as well as use of pharmaceutical chelators against heavy metals are reviewed. Historical adverse outcomes with chelators, lessons learned in the art of using them, and successes using chelation to ameliorate renal, cardiovascular, and neurological conditions highlight the need for renewed attention to simple, safe, inexpensive interventions that offer potential to stem the tide of debilitating, expensive chronic disease.

  18. Affinity purification of copper chelating peptides from chickpea protein hydrolysates.

    Science.gov (United States)

    Megías, Cristina; Pedroche, Justo; Yust, Maria M; Girón-Calle, Julio; Alaiz, Manuel; Millan, Francisco; Vioque, Javier

    2007-05-16

    Chickpea protein hydrolysates obtained with alcalase and flavourzyme were used for purification of copper chelating peptides by affinity chromatography using copper immobilized on solid supports. The chelating activity of purified peptides was indirectly measured by the inhibition of beta-carotene oxidation in the presence of copper. Two protein hydrolysates, obtained after 10 and 100 min of hydrolysis, were the most inhibitory of beta-carotene oxidation. Purified copper chelating peptides from these protein hydrolysates contained 19.7 and 35.1% histidine, respectively, in comparison to 2.7 and 2.6% in the protein hydrolysates. Chelating peptides from hydrolysate obtained after 10 min of hydrolysis were the most antioxidative being 8.3 times more antioxidative than the hydrolysate, while chelating peptides purified from protein hydrolysate obtained after 100 min were 3.1 times more antioxidative than its hydrolysate. However, the histidine content was higher in peptides derived from the 100 min hydrolysate (19.7 against 35.1% in 10 min hydrolysate), indicating that this amino acid is not the only factor involved in the antioxidative activity, and other factors such as peptide size or amino acid sequence are also determinant. This manuscript shows that affinity chromatography is a useful procedure for purification of copper chelating peptides. This method can be extended to other metals of interest in nutrition, such as calcium, iron, or zinc. Purified chelating peptides, in addition to their antioxidative properties, may also be useful in food mineral fortification for increasing the bioavailability of these metals.

  19. Minimal role of metallothionein in decreased chelator efficacy for cadmium.

    Science.gov (United States)

    Waalkes, M P; Watkins, J B; Klaassen, C D

    1983-05-01

    Chelator efficacy in Cd poisoning drops precipitously if therapy is not commenced almost immediately after exposure. Metallothionein (MT), a low-molecular-weight metal-binding protein with high affinity for Cd, may be important for this phenomenon. To more fully assess this role of MT in the acute drop in chelator efficacy following Cd poisoning, rats were injected iv with radioisotopic Cd (1mg/kg as CdCl2; 50 muCi/kg) followed by diethylenetriaminepentaacetic acid (DTPA; 90 mg/kg ip) at various times (0, 15, 30, 60, and 120 min) after Cd. Ther percentage of the Cd dose remaining in major organs 24 hr following Cd was determined. Although DTPA reduced Cd content in the various organs when given immediately after Cd, the chelator was ineffective at all later times. Increases in hepatic and renal MT did not occur until 2 hr after Cd, and did not coincide with the earlier drop in chelator efficacy. Blockade of MT synthesis by actinomycin D treatment (1.25 mg/kg, 1 hr before Cd) failed to prolong the chelators effectiveness. Furthermore, newborn rats have high levels of hepatic MT which had no effect on the time course of chelator effectiveness since DTPA still decreased Cd organ contents if given immediately following Cd but had no effect if given 2 hr after Cd. Therefore, if appears that MT does not have an important role in the acute decrease in efficacy of chelation therapy for Cd poisoning. The quick onset of chelator ineffectiveness may be due to the rapid uptake of Cd into tissues which makes it relatively unavailable of chelation.

  20. STUDY ON THERMAL DECOMPOSITION KINETICS OF URUSHIOL METAL CHELATE POLYMERS

    Institute of Scientific and Technical Information of China (English)

    HU Binghuan; CHEN Riyao; LIN Jinhuo; CHEN Wending

    1994-01-01

    The thermal decomposition kinetics of urushiol-Cu, urushiol-Nd and urushiol-Ti chelate polymers has been studied by non-isothermal thermogravimetry. The results suggest that the thermal decomposition kinetics of three chelate polymers are all of first order. Their average activation energy values of the thermal decomposition calculated by Ozawa-(Ⅰ) method are 110.79,136.98 and 163.64 kJ mol-1respectively,which increase linearly with the metal valence of the metal chelate polymers

  1. When high-capacity readers slow down and low-capacity readers speed up: Working memory and locality effects

    Directory of Open Access Journals (Sweden)

    Bruno eNicenboim

    2016-03-01

    Full Text Available We examined the effects of argument-head distance in SVO and SOV languages (Spanish and German, while taking into account readers’ working memory capacity and controlling for expectation (Levy, 2008 and other factors. We predicted only locality effects, that is, a slow-down produced by increased dependency distance (Gibson, 2000; Lewis & Vasishth, 2005. Furthermore, we expected stronger locality effects for readers with low working memory capacity. Contrary to our predictions, low-capacity readers showed faster reading with increased distance, while high-capacity readers showed locality effects. We suggest that while the locality effects are compatible with memory-based explanations, the speedup of low-capacity readers can be explained by an increased probability of retrieval failure. We present a computational model based on ACT-R built under the previous assumptions, which is able to give a qualitative account for the present data and can be tested in future research. Our results suggest that in some cases, interpreting longer RTs as indexing increased processing difficulty and shorter RTs as facilitation may be too simplistic: The same increase in processing difficulty may lead to slowdowns in high-capacity readers and speedups in low-capacity ones. Ignoring individual level capacity differences when investigating locality effects may lead to misleading conclusions.

  2. Life cycle environmental impact of high-capacity lithium ion battery with silicon nanowires anode for electric vehicles.

    Science.gov (United States)

    Li, Bingbing; Gao, Xianfeng; Li, Jianyang; Yuan, Chris

    2014-01-01

    Although silicon nanowires (SiNW) have been widely studied as an ideal material for developing high-capacity lithium ion batteries (LIBs) for electric vehicles (EVs), little is known about the environmental impacts of such a new EV battery pack during its whole life cycle. This paper reports a life cycle assessment (LCA) of a high-capacity LIB pack using SiNW prepared via metal-assisted chemical etching as anode material. The LCA study is conducted based on the average U.S. driving and electricity supply conditions. Nanowastes and nanoparticle emissions from the SiNW synthesis are also characterized and reported. The LCA results show that over 50% of most characterized impacts are generated from the battery operations, while the battery anode with SiNW material contributes to around 15% of global warming potential and 10% of human toxicity potential. Overall the life cycle impacts of this new battery pack are moderately higher than those of conventional LIBs but could be actually comparable when considering the uncertainties and scale-up potential of the technology. These results are encouraging because they not only provide a solid base for sustainable development of next generation LIBs but also confirm that appropriate nanomanufacturing technologies could be used in sustainable product development.

  3. Development of Interleukin-2 Loaded Chitosan-Based Nanogels Using Artificial Neural Networks and Investigating the Effects on Wound Healing in Rats.

    Science.gov (United States)

    Aslan, Canan; Çelebi, Nevin; Değim, I Tuncer; Atak, Ayşegül; Özer, Çiğdem

    2017-05-01

    The aim of this study was to develop and characterize rh- IL-2 loaded chitosan-based nanogels for the healing of wound incision in rats. Nanogels were prepared using chitosan and bovine serum albumin (BSA) by ionic gelation method and high temperature application, respectively. Particle size, zeta potential, and polydispersity index were measured for characterization of nanogels. The morphology of nanogels was examined by using SEM and AFM. The IL-2 loading capacity of nanogels was determined using ELISA method. In vitro release of IL-2 from nanogels was performed using Franz diffusion cells. Artificial neural network (ANN) models were developed using selected input parameters (stirring rate, chitosan%, BSA%, TPP%) where particle size was an output parameter for IL-2 free nanogels. Wound healing effect of IL-2 loaded chitosan-TPP nanogel was evaluated by determining the malondialdehyde (MDA) and glutathione (GSH) levels of wound tissues in rats. The particle size of IL-2 loaded chitosan-TPP nanogels was found to be larger than that of IL-2 loaded BSA-based chitosan nanogels. Drug loading capacity of nanogels was found 100% ± 0.010 for both nanogels. IL-2 was released slowly after the initial burst effect. According to SEM and AFM imaging, BSA-chitosan nanogel particles were of nanometer size and presented a swelling tendency, and chitosan-TPP nanogel particles were found to be spherical and homogenously dispersed. IL-2 loaded chitosan-TPP nanogel was found suitable for improving wound healing because it decreased the MDA levels and increased the GSH levels wound tissues comparing to control group.

  4. The development of non-toxic ionic-crosslinked chitosan-based microspheres as carriers for the controlled release of silk sericin.

    Science.gov (United States)

    Aramwit, Pornanong; Ekasit, Sanong; Yamdech, Rungnapha

    2015-10-01

    Silk sericin is recently shown to possess various biological activities for biomedical applications. While various sericin carriers were developed for drug delivery system, very few researches considered sericin as a bioactive molecule itself. In this study, sericin incorporated in the chitosan-based microspheres was introduced as a bioactive molecule and bioactive carrier at the same time. The chitosan/sericin (CH/SS) microspheres at different composition (80/20, 70/30, 60/40, and 50/50) were successfully fabricated using anhydroustri-polyphosphate (TPP) as a polyanionic crosslinker. The microspheres with an average size of 1-4 μm and narrow size distribution were obtained. From FT-IR spectra, the presence of both chitosan and sericin in the microspheres confirmed the occurrence of ionic interaction that crosslink them within the microspheres. We also found that the CH/SS microspheres prepared at 50/50 could encapsulate sericin at the highest percentage (37.28%) and release sericin in the most sustained behavior, possibly due to the strong ionic interaction of the positively charged chitosan and the negatively charged sericin. On the other hand, the composition of CH/SS had no effect on the degradation rate of microspheres. All microspheres continuously degraded and remained around 20% after 14 days of enzymatic degradation. This explained that the ionic crosslinkings between chitosan and sericin could be demolished by the enzyme and hydrolysis. Furthermore, we have verified that all CH/SS microspheres at any concentrations showed non-toxicity to L929 mouse fibroblast cells. Therefore, we suggested that the non-toxic ionic-crosslinked CH/SS microspheres could be incorporated in wound dressing material to achieve the sustained release of sericin for accelerated wound healing.

  5. Metal chelate process to remove pollutants from fluids

    Science.gov (United States)

    Chang, Shih-Ger T.

    1994-01-01

    The present invention relates to improved methods using an organic iron chelate to remove pollutants from fluids, such as flue gas. Specifically, the present invention relates to a process to remove NO.sub.x and optionally SO.sub.2 from a fluid using a metal ion (Fe.sup.2+) chelate wherein the ligand is a dimercapto compound wherein the --SH groups are attached to adjacent carbon atoms (HS--C--C--SH) or (SH--C--CCSH) and contain a polar functional group so that the ligand of DMC chelate is water soluble. Alternatively, the DMC' is covalently attached to a water insoluble substrate such as a polymer or resin, e.g., polystyrene. The chelate is regenerated using electroreduction or a chemical additive. The dimercapto compound bonded to a water insoluble substrate is also useful to lower the concentration or remove hazardous metal ions from an aqueous solution.

  6. A Brief Review of Chelators for Radiolabeling Oligomers

    Directory of Open Access Journals (Sweden)

    Yuxia Liu

    2010-05-01

    Full Text Available The chemical modification of oligomers such as DNA, PNA, MORF, LNA to attach radionuclides for nuclear imaging and radiotherapy applications has become a field rich in innovation as older methods are improved and new methods are introduced. This review intends to provide a brief overview of several chelators currently in use for the labeling of oligomers with metallic radionuclides such as 99mTc, 111In and 188Re. While DNA and its analogs have been radiolabeled with important radionuclides of nonmetals such as 32P, 35S, 14C, 18F and 125I, the labeling methods for these isotopes involve covalent chemistry that is quite distinct from the coordinate-covalent chelation chemistry described herein. In this review, we provide a summary of the several chelators that have been covalently conjugated to oligomers for the purpose of radiolabeling with metallic radionuclides by chelation and including details on the conjugation, the choice of radionuclides and labeling methods.

  7. Metal chelate process to remove pollutants from fluids

    Science.gov (United States)

    Chang, S.G.T.

    1994-12-06

    The present invention relates to improved methods using an organic iron chelate to remove pollutants from fluids, such as flue gas. Specifically, the present invention relates to a process to remove NO[sub x] and optionally SO[sub 2] from a fluid using a metal ion (Fe[sup 2+]) chelate wherein the ligand is a dimercapto compound wherein the --SH groups are attached to adjacent carbon atoms (HS--C--C--SH) or (SH--C--CCSH) and contain a polar functional group so that the ligand of DMC chelate is water soluble. Alternatively, the DMC is covalently attached to a water insoluble substrate such as a polymer or resin, e.g., polystyrene. The chelate is regenerated using electroreduction or a chemical additive. The dimercapto compound bonded to a water insoluble substrate is also useful to lower the concentration or remove hazardous metal ions from an aqueous solution. 26 figures.

  8. Synthetic Lubricating Oil Greases Containing Metal Chelates of Schiff Bases

    Science.gov (United States)

    1992-09-15

    greases comprising the addition to said greases of effective amounts of a chelated Schiff base derived from the condensation of approximately stoichiometic amounts of at least one aldehyde and a polyamine.

  9. NIR emitting ytterbium chelates for colourless luminescent solar concentrators.

    Science.gov (United States)

    Sanguineti, Alessandro; Monguzzi, Angelo; Vaccaro, Gianfranco; Meinardi, Franco; Ronchi, Elisabetta; Moret, Massimo; Cosentino, Ugo; Moro, Giorgio; Simonutti, Roberto; Mauri, Michele; Tubino, Riccardo; Beverina, Luca

    2012-05-14

    A new oxyiminopyrazole-based ytterbium chelate enables NIR emission upon UV excitation in colorless single layer luminescent solar concentrators for building integrated photovoltaics. This journal is © the Owner Societies 2012

  10. Development of Multi-Functional Chelators Based on Sarcophagine Cages

    Directory of Open Access Journals (Sweden)

    Shuanglong Liu

    2014-04-01

    Full Text Available A new class of multifunctionalized sarcophagine derivatives was synthesized for 64Cu chelation. The platform developed in this study could have broad applications in 64Cu-radiopharmaceuticals.

  11. Comparing potential copper chelation mechanisms in Parkinson's disease protein

    Science.gov (United States)

    Rose, Frisco; Hodak, Miroslav; Bernholc, Jerry

    2011-03-01

    We have implemented the nudged elastic band (NEB) as a guided dynamics framework for our real-space multigrid method of DFT-based quantum simulations. This highly parallel approach resolves a minimum energy pathway (MEP) on the energy hypersurface by relaxing intermediates in a chain-of-states. As an initial application we present an investigation of chelating agents acting on copper ion bound to α -synuclein, whose misfolding is implicated in Parkinson's disease (PD). Copper ions are known to act as highly effective misfolding agents in a-synuclein and are thus an important target in understanding PD. Furthermore, chelation therapy has shown promise in the treatment of Alzheimer's and other neuro-degenerative diseases with similar metal-correlated pathologies. At present, our candidate chelating agents include nicotine, curcumin and clioquinol. We examine their MEP activation barriers in the context of a PD onset mechanism to assess the viability of various chelators for PD remediation.

  12. Targeted Iron Chelation Will Improve Recovery after Spinal Cord Injury

    Science.gov (United States)

    2014-10-01

    Neuroprotection Ferritin Introduction recovery after traumatic spinal cord injury (SCI). An optimal treatment to reverse or prevent damage...Hider and Zhou, 2005). However, this intracellular chelation may still be beneficial by preventing free iron from participating in free radical...active iron-chelating agent in patients with transfusion-dependent iron overload due to beta- thalassemia . J. Clin. Pharmacol. 43 (6), 565-572. Hider

  13. Iron Chelation Adherence to Deferoxamine and Deferasirox in Thalassemia

    OpenAIRE

    Trachtenberg, Felicia; Vichinsky, Elliott; Haines, Dru; Pakbaz, Zahra; Mednick, Lauren; Sobota, Amy; Kwiatkowski, Janet; Thompson, Alexis A.; Porter, John; Coates, Thomas; Giardina, Patricia J.; Olivieri, Nancy; Yamashita, Robert; Neufeld, Ellis J.

    2011-01-01

    The Thalassemia Clinical Research Network collected adherence information from 79 patients on deferoxamine and 186 on deferasirox from 2007 to 2009. Chelation adherence was defined as percent of doses administered in the last 4 weeks (patient report) out of those prescribed (chart review). Chelation history since 2002 was available for 97 patients currently on deferoxamine and 217 on deferasirox, with crude estimates of adherence from chart review. Self-reported adherence to both deferoxamine...

  14. Deferasirox, an oral chelator in the treatment of iron overload

    OpenAIRE

    I. Portioli

    2013-01-01

    BACKGROUND Deferasirox is a once-daily oral iron chelator developed for treating iron overload complicating long-term transfusion therapy in patients with diseases such as beta-thalassemia and myelodysplastic syndromes. Iron overload can damage the liver, pancreas and the heart. Deferoxamine, the only other drug approved for iron chelation, can prevent these effects but requires parenteral administration. Deferasirox has been approved after a one-year, open-label trial in patients ≥ 2 years o...

  15. Chelated Ruthenium Catalysts for Z-Selective Olefin Metathesis

    Science.gov (United States)

    Endo, Koji; Grubbs, Robert H.

    2011-01-01

    We report the development of ruthenium-based metathesis catalysts with chelating N-heterocyclic carbene (NHC) ligands which catalyze highly Z-selective olefin metathesis. A very simple and convenient synthetic procedure of such a catalyst has been developed. An intramolecular C-H bond activation of the NHC ligand, which is promoted by anion ligand substitution, forms the appropriate chelate for stereo- controlled olefin metathesis. PMID:21563826

  16. Iron chelation adherence to deferoxamine and deferasirox in thalassemia.

    Science.gov (United States)

    Trachtenberg, Felicia; Vichinsky, Elliott; Haines, Dru; Pakbaz, Zahra; Mednick, Lauren; Sobota, Amy; Kwiatkowski, Janet; Thompson, Alexis A; Porter, John; Coates, Thomas; Giardina, Patricia J; Olivieri, Nancy; Yamashita, Robert; Neufeld, Ellis J

    2011-05-01

    The Thalassemia Clinical Research Network collected adherence information from 79 patients on deferoxamine and 186 on deferasirox from 2007 to 2009. Chelation adherence was defined as percent of doses administered in the last 4 weeks (patient report) out of those prescribed(chart review). Chelation history since 2002 was available for 97 patients currently on deferoxamine and 217 on deferasirox, with crude estimates of adherence from chart review. Self-reported adherence to both deferoxamine and deferasirox were quite high, with slightly higher adherence to the oral chelator (97 vs. 92%). Ninety percent of patients on deferasirox reported at least 90% adherence, compared with 75% of patients on deferoxamine. Adherence to both chelators was highest in children, followed by adolescents and older adults.Predictors of lower deferoxamine adherence were smoking in the past year, problems sticking themselves (adults only), problems wearing their pump, and fewer transfusions in the past year. Predictors of lower deferasirox adherence were bodily pain and depression. Switching chelators resulted in increased adherence, regardless of the direction of the switch, although switching from deferoxamine to deferasirox was far more common. As adherence to deferoxamine is higher than previously reported, it appears beneficial for patients to have a choice in chelators.

  17. Extraction of metals using supercritical fluid and chelate forming legand

    Science.gov (United States)

    Wai, Chien M.; Laintz, Kenneth E.

    1998-01-01

    A method of extracting metalloid and metal species from a solid or liquid material by exposing the material to a supercritical fluid solvent containing a chelating agent is described. The chelating agent forms chelates that are soluble in the supercritical fluid to allow removal of the species from the material. In preferred embodiments, the extraction solvent is supercritical carbon dioxide and the chelating agent is a fluorinated .beta.-diketone. In especially preferred embodiments the extraction solvent is supercritical carbon dioxide, and the chelating agent comprises a fluorinated .beta.-diketone and a trialkyl phosphate, or a fluorinated .beta.-diketone and a trialkylphosphine oxide. Although a trialkyl phosphate can extract lanthanides and actinides from acidic solutions, a binary mixture comprising a fluorinated .beta.-diketone and a trialkyl phosphate or a trialkylphosphine oxide tends to enhance the extraction efficiencies for actinides and lanthanides. The method provides an environmentally benign process for removing contaminants from industrial waste without using acids or biologically harmful solvents. The method is particularly useful for extracting actinides and lanthanides from acidic solutions. The chelate and supercritical fluid can be regenerated, and the contaminant species recovered, to provide an economic, efficient process.

  18. Extraction of metals using supercritical fluid and chelate forming ligand

    Science.gov (United States)

    Wai, C.M.; Laintz, K.E.

    1998-03-24

    A method of extracting metalloid and metal species from a solid or liquid material by exposing the material to a supercritical fluid solvent containing a chelating agent is described. The chelating agent forms chelates that are soluble in the supercritical fluid to allow removal of the species from the material. In preferred embodiments, the extraction solvent is supercritical carbon dioxide and the chelating agent is a fluorinated {beta}-diketone. In especially preferred embodiments the extraction solvent is supercritical carbon dioxide, and the chelating agent comprises a fluorinated {beta}-diketone and a trialkyl phosphate, or a fluorinated {beta}-diketone and a trialkylphosphine oxide. Although a trialkyl phosphate can extract lanthanides and actinides from acidic solutions, a binary mixture comprising a fluorinated {beta}-diketone and a trialkyl phosphate or a trialkylphosphine oxide tends to enhance the extraction efficiencies for actinides and lanthanides. The method provides an environmentally benign process for removing contaminants from industrial waste without using acids or biologically harmful solvents. The method is particularly useful for extracting actinides and lanthanides from acidic solutions. The chelate and supercritical fluid can be regenerated, and the contaminant species recovered, to provide an economic, efficient process. 7 figs.

  19. Μethods of iron chelation therapy: a bibliographic review

    Directory of Open Access Journals (Sweden)

    Maria Agapiou

    2012-01-01

    Full Text Available "Iron Chelation Therapy" is a term used to describe the procedure of removing excess iron from the body, which is applied after a total of approximately 20 blood transfusions or when serum ferritin levels rise above 1000 ng/ml. Aim: The purpose of the present paper is a retrospective search in bibliography, concerning the methods of iron chelation treatment for patients with hemochromatosis owing to their undergoing multiple blood transfusions. Method: The methology followed, included the search for review and research studies, in electronic databases as well as scientific haematology journals, mostly regarding recent entries in greek and international bibliography. Results: According to the bibliography, chelation therapy compounds have significantly changed the patients' clinical features and have substantially improved their quality of life, along with their outcome over time. However, the level of patient compliance to treatment still remains the basic problem of iron chelation therapy. Conclusions: Even though the discovery of orally administered chelating agents can qualify as an auspicious accomplishment, research fields should cover a much wider spectrum, in order to improve the effectiveness of iron chelation treatment.

  20. Iron Chelation Adherence to Deferoxamine and Deferasirox in Thalassemia

    Science.gov (United States)

    Trachtenberg, Felicia; Vichinsky, Elliott; Haines, Dru; Pakbaz, Zahra; Mednick, Lauren; Sobota, Amy; Kwiatkowski, Janet; Thompson, Alexis A.; Porter, John; Coates, Thomas; Giardina, Patricia J.; Olivieri, Nancy; Yamashita, Robert; Neufeld, Ellis J.

    2015-01-01

    The Thalassemia Clinical Research Network collected adherence information from 79 patients on deferoxamine and 186 on deferasirox from 2007 to 2009. Chelation adherence was defined as percent of doses administered in the last 4 weeks (patient report) out of those prescribed (chart review). Chelation history since 2002 was available for 97 patients currently on deferoxamine and 217 on deferasirox, with crude estimates of adherence from chart review. Self-reported adherence to both deferoxamine and deferasirox were quite high, with slightly higher adherence to the oral chelator (97 vs. 92%). Ninety percent of patients on deferasirox reported at least 90% adherence, compared with 75% of patients on deferoxamine. Adherence to both chelators was highest in children, followed by adolescents and older adults. Predictors of lower deferoxamine adherence were smoking in the past year, problems sticking themselves (adults only), problems wearing their pump, and fewer transfusions in the past year. Predictors of lower deferasirox adherence were bodily pain and depression. Switching chelators resulted in increased adherence, regardless of the direction of the switch, although switching from deferoxamine to deferasirox was far more common. As adherence to deferoxamine is higher than previously reported, it appears beneficial for patients to have a choice in chelators. PMID:21523808

  1. THE STUDIES ON CHELATING FIBER V.ADSORPTION BEHAVIOR OF Au3+ ONTO CHELATING FIBER CONTAINING AMIDOXIME GROUPS

    Institute of Scientific and Technical Information of China (English)

    LINWeiping; LUYun; 等

    1992-01-01

    The adsorption behavior of ionic gold onto chelating fiber containing amidoxime groups was investigated. The chelating fiber presents high adsorption capacity for ionic gold Au3+(up to 626mg/g,when the content of amidoxime group reaches 7.59mmol/g),and possesses the ability to reduce the Au3+ into metallic gold,In the redox process,the amidoxime group is oxidized into carboxyl group.

  2. Spongelike Nanosized Mn 3 O 4 as a High-Capacity Anode Material for Rechargeable Lithium Batteries

    KAUST Repository

    Gao, Jie

    2011-07-12

    Mn3O4 has been investigated as a high-capacity anode material for rechargeable lithium ion batteries. Spongelike nanosized Mn 3O4 was synthesized by a simple precipitation method and characterized by powder X-ray diffraction, Raman scattering and scanning electron microscopy. Its electrochemical performance, as an anode material, was evaluated by galvanostatic discharge-charge tests. The results indicate that this novel type of nanosized Mn3O4 exhibits a high initial reversible capacity (869 mA h/g) and significantly enhanced first Coulomb efficiency with a stabilized reversible capacity of around 800 mA h/g after over 40 charge/discharge cycles. © 2011 American Chemical Society.

  3. Strong dependency of lithium diffusion on mechanical constraints in high-capacity Li-ion battery electrodes

    Institute of Scientific and Technical Information of China (English)

    Yi-Fan Gao; Min Zhou

    2012-01-01

    The effect of external constraints on Li diffusion in high-capacity Li-ion battery electrodes is investigated using a coupled finite deformation theory.It is found that thinfilm electrodes on rigid substrates experience much slower diffusion rates compared with free-standing films with the same material properties and geometric dimensions.More importantly,the study reveals that mechanical driving forces tend to retard diffusion in highly-constrained thin films when lithiation-induced softening is considered,in contrast to the fact that mechanical driving forces always enhance diffusion when deformation is fully elastic.The results provide further proof that nano-particles are a better design option for nextgeneration alloy-based electrodes compared with thin films.

  4. High-Capacity and Self-Stabilized Manganese Carbonate Microspheres as Anode Material for Lithium-Ion Batteries.

    Science.gov (United States)

    Xiao, Liang; Wang, Shiyao; Wang, Yafei; Meng, Wen; Deng, Bohua; Qu, Deyu; Xie, Zhizhong; Liu, Jinping

    2016-09-28

    Manganese carbonate (MnCO3) is an attractive anode material with high capacity based on conversion reaction for lithium-ion batteries (LIBs), but its application is mainly hindered by poor cycling performance. Building nanostructures/porous structures and nanocomposites has been demonstrated as an effective strategy to buffer the volume changes and maintain the electrode integrity for long-term cycling. It is widely believed that microsized MnCO3 is not suitable for use as anode material for LIBs because of its poor conductivity and the absence of nanostructure. Herein, different from previous reports, spherical MnCO3 with the mean diameters of 6.9 μm (MnCO3-B), 4.0 μm (MnCO3-M), and 2.6 μm (MnCO3-S) were prepared via controllable precipitation and utilized as anode materials for LIBs. It is interesting that the as-prepared MnCO3 microspheres demonstrate both high capacity and excellent cycling performance comparable to their reported nanosized counterparts. MnCO3-B, MnCO3-M, and MnCO3-S deliver reversible specific capacities of 487.3, 573.9, and 656.8 mA h g(-1) after 100 cycles, respectively. All the MnCO3 microspheres show capacity retention more than 90% after the initial stage. The advantages of MnCO3 microspheres were investigated via constant-current charge/discharge, cyclic voltammetry and electrochemical impedance spectroscopy. The results indicate that there should be substantial structure transformation from microsized particle to self-stabilized nanostructured matrix for MnCO3 at the initial charge/discharge stage. The evolution of EIS during charge/discharge clearly indicates the formation and stabilization of the nanostructured matrix. The self-stabilized porous matrix maintains the electrode structure to deliver excellent cycling performance, and contributes extra capacity beyond conversion reaction.

  5. Topology of genetic associations between regional gray matter volume and intellectual ability: Evidence for a high capacity network.

    Science.gov (United States)

    Bohlken, Marc M; Brouwer, Rachel M; Mandl, René C W; Hedman, Anna M; van den Heuvel, Martijn P; van Haren, Neeltje E M; Kahn, René S; Pol, Hilleke E Hulshoff

    2016-01-01

    Intelligence is associated with a network of distributed gray matter areas including the frontal and parietal higher association cortices and primary processing areas of the temporal and occipital lobes. Efficient information transfer between gray matter regions implicated in intelligence is thought to be critical for this trait to emerge. Genetic factors implicated in intelligence and gray matter may promote a high capacity for information transfer. Whether these genetic factors act globally or on local gray matter areas separately is not known. Brain maps of phenotypic and genetic associations between gray matter volume and intelligence were made using structural equation modeling of 3T MRI T1-weighted scans acquired in 167 adult twins of the newly acquired U-TWIN cohort. Subsequently, structural connectivity analyses (DTI) were performed to test the hypothesis that gray matter regions associated with intellectual ability form a densely connected core. Gray matter regions associated with intellectual ability were situated in the right prefrontal, bilateral temporal, bilateral parietal, right occipital and subcortical regions. Regions implicated in intelligence had high structural connectivity density compared to 10,000 reference networks (p=0.031). The genetic association with intelligence was for 39% explained by a genetic source unique to these regions (independent of total brain volume), this source specifically implicated the right supramarginal gyrus. Using a twin design, we show that intelligence is genetically represented in a spatially distributed and densely connected network of gray matter regions providing a high capacity infrastructure. Although genes for intelligence have overlap with those for total brain volume, we present evidence that there are genes for intelligence that act specifically on the subset of brain areas that form an efficient brain network.

  6. The Effect of Different Tea Varieties on Iron Chelation

    Science.gov (United States)

    Truong, S. K.; Karim, R.

    2016-12-01

    The chief objectives of this experiment are to distinguish which type of tea of four variants, pomegranate blackberry green, green, lemon chamomile (herbal), and earl grey (black), are capable of chelating the most iron (III) chloride (FeCl3) through titration. We hypothesized that if each tea variety chelates differing amounts of iron chloride, and if we conduct an experiment in which four different teas are mixed in the same amount of water, iron chloride, and iron chloride indicator EDTA, then the pomegranate blackberry green tea will bind to the most iron due to its large amount of fruit antioxidants. To summarize our methodology, we prepared three solutions of each tea, dissolved with 1 gram of FeCl3 to test three trials per tea variety. The chelation process took place overnight as teas cooled. Six drops of iron chloride indicator added to each solution began the titration. The necessary amount of 0.1M EDTA (ethylenediaminetetraacetic acid) drops required for each solution to turn to a universal amber color from its original dark tone indicates how many free iron molecules were left unbound by the tea solution. After careful analysis of the data, we discovered that blackberry pomegranate green tea possessed the best chelating abilities with 97.48% of FeCl3 adsorbed. Green tea followed with 96.67%. Herbal tea chelated 94.24% of the iron while earl grey absorbed the least amount at 93.43%. From our conclusion, we drew that since blackberry pomegranate green tea contained the highest amount of polyphenols and antioxidants as well as epigallocatechin gallate (EGCG) found in green teas, it was able to chelate the most amount of iron. The substances mentioned in blackberry pomegranate green tea possess the ability to form strong bonds with multiple heavy metals, such as iron (III) chloride atoms. Overall, each variety of tea contains different organic substances. Each of these substances possesses a unique chelating ability, determining how well the type of tea can

  7. REGIONAL SIDEROSIS: A NEW CHALLENGE FOR IRON CHELATION THERAPY

    Directory of Open Access Journals (Sweden)

    Zvi Ioav Cabantchik

    2013-12-01

    Full Text Available The traditional role of iron chelation therapy has been to reduce body iron burden via chelation of excess metal from organs and fluids and its excretion via biliary-fecal and/or urinary routes. In their present use for hemosiderosis, chelation regimens might not be suitable for treating disorders of iron maldistribution, as those are characterized by toxic islands of siderosis appearing in a background of normal or subnormal iron levels (e.g. sideroblastic anemias, neuro- and cardio-siderosis in Friedreich ataxia- and neurosiderosis in Parkinson’s disease. We aimed at clearing local siderosis from aberrant labile metal that promotes oxidative damage, without interfering with essential local functions or with hematological iron-associated properties. For this purpose we introduced a conservative mode of iron chelation based on dual activity based on scavenging labile metal but also redeploying it to cell acceptors or to physiological transferrin. The scavenging and redeployment mode of action was designed both for correcting aberrant iron distribution and also for minimizing/preventing systemic loss of chelated metal. We first examine cell models that recapitulate iron maldistribution and associated dysfunctions identified with Friedreich ataxia and Parkinson’s disease and use them to explore the ability of the double-acting agent deferiprone, an orally active chelator, to mediate iron scavenging and redeployment and thereby causing functional improvement. We subsequently evaluate the concept in translational models of disease and finally assess its therapeutic potential in prospective double-blind pilot clinical trials. We claim that any chelator applied to diseases of regional siderosis, cardiac, neuronal or endocrine ought to preserve both systemic and regional iron levels. The proposed deferiprone-based therapy has provided a paradigm for treating regional types of siderosis without affecting hematological parameters and systemic

  8. In vitro copper-chelating properties of flavonoids.

    Science.gov (United States)

    Ríha, Michal; Karlícková, Jana; Filipský, Tomáš; Jahodár, Ludek; Hrdina, Radomír; Mladenka, Premysl

    2014-10-01

    Copper is an indispensable trace element for human body and the association between a disruption of copper homeostasis and a series of pathological states has been well documented. Flavonoids influence the human health in a complex way and the chelation of transient metal ions indisputably contributes to their mechanism of the action, however, the information about their copper-chelating properties have been sparse. This in vitro study was thus aimed at the detailed examination of flavonoids-copper interactions by two spectrophotometric assays at four (patho)physiologically relevant pH conditions (4.5-7.5), with the emphasis on the structure-activity relationship. The tested flavonoids were compared with the clinically used copper chelator, trientine. Most of the 26 flavonoids chelated copper ions, however, in a variable extent. Only flavones and flavonols were able to form stable complexes with both cupric and cuprous ions. The 3-hydroxy-4-keto group and 5,6,7-trihydroxyl group represented the most efficient chelation sites in flavonols and flavones, respectively, and the 2,3-double bond was essential for the stable copper chelation. Interestingly, the 3´,4´-dihydroxyl (catechol) group was associated only with a weak activity. Although none of the tested flavonoids were more potent than trientine at physiological or slightly acidic conditions, 3-hydroxyflavone, kaempferol and partly baicalein surpassed trientine at acidic conditions. Conclusively, flavonoids containing appropriate structural features were efficient copper chelators and some of them were even more potent than trientine under acidic conditions. Copyright © 2014. Published by Elsevier Inc.

  9. Three plutonium chelation cases at Los Alamos National Laboratory.

    Science.gov (United States)

    Bertelli, Luiz; Waters, Tom L; Miller, Guthrie; Gadd, Milan S; Eaton, Michelle C; Guilmette, Raymond A

    2010-10-01

    Chelation treatments with dosages of 1 g of either Ca-DTPA (Trisodium calcium diethylenetriaminepentaacetate) or Zn-DTPA (Trisodium zinc diethylenetriaminepentaacetate) were undertaken at Los Alamos Occupational Medicine in three recent cases of wounds contaminated with metallic forms of Pu. All cases were finger punctures, and each chelation injection contained the same dosage of DTPA. One subject was treated only once, while the other two received multiple injections. Additional measurements of wound, urine, and excised tissues were taken for one of the cases. These additional measurements served to improve the estimate of the efficacy of the chelation treatment. The efficacy of the chelation treatments was compared for the three cases. Results were interpreted using models, and useful heuristics for estimating the intake amount and final committed doses were presented. In spite of significant differences in the treatments and in the estimated intake amounts and doses amongst the three cases, a difference of four orders of magnitude was observed between the highest excretion data point and the values observed at about 100 d for all cases. Differences between efficacies of Zn-DTPA and Ca-DTPA could not be observed in this study. An efficacy factor of about 50 was observed for a chelation treatment, which was administered at about 1.5 y after the incident, though the corresponding averted dose was very small (LA-UR 09-02934).

  10. Supercritical Fluid Extraction of Metal Chelate: A Review.

    Science.gov (United States)

    Ding, Xin; Liu, Qinli; Hou, Xiongpo; Fang, Tao

    2017-03-04

    Supercritical fluid extraction (SFE), as a new green extraction technology, has been used in extracting various metal species. The solubilities of chelating agents and corresponding metal chelates are the key factors which influence the efficiency of SFE. Other main properties of them such as stability and selectivity are also reviewed. The extraction mechanisms of mainly used chelating agents are explained by typical examples in this paper. This is the important aspect of SFE of metal ions. Moreover, the extraction efficiencies of metal species also depend on other factors such as temperature, pressure, extraction time and matrix effect. The two main complexation methods namely in-situ and on-line chelating SFE are described in detail. As an efficient chelating agent, tributyl phosphate-nitric acid (TBP-HNO3) complex attracts much attention. The SFE of metal ions, lanthanides and actinides as well as organometallic compounds are also summarized. With the proper selection of ligands, high efficient extraction of metal species can be obtained. As an efficient sample analysis method, supercritical fluid chromatography (SFC) is introduced in this paper. Recently, the extraction method combining ionic liquids (ILs) with supercritical fluid has been becoming a novel technology for treating metal ions. The kinetics related to SFE of metal species is discussed with some specific examples.

  11. Ab initio coordination chemistry for nickel chelation motifs.

    Science.gov (United States)

    Sudan, R Jesu Jaya; Kumari, J Lesitha Jeeva; Sudandiradoss, C

    2015-01-01

    Chelation therapy is one of the most appreciated methods in the treatment of metal induced disease predisposition. Coordination chemistry provides a way to understand metal association in biological structures. In this work we have implemented coordination chemistry to study nickel coordination due to its high impact in industrial usage and thereby health consequences. This paper reports the analysis of nickel coordination from a large dataset of nickel bound structures and sequences. Coordination patterns predicted from the structures are reported in terms of donors, chelate length, coordination number, chelate geometry, structural fold and architecture. The analysis revealed histidine as the most favored residue in nickel coordination. The most common chelates identified were histidine based namely HHH, HDH, HEH and HH spaced at specific intervals. Though a maximum coordination number of 8 was observed, the presence of a single protein donor was noted to be mandatory in nickel coordination. The coordination pattern did not reveal any specific fold, nevertheless we report preferable residue spacing for specific structural architecture. In contrast, the analysis of nickel binding proteins from bacterial and archeal species revealed no common coordination patterns. Nickel binding sequence motifs were noted to be organism specific and protein class specific. As a result we identified about 13 signatures derived from 13 classes of nickel binding proteins. The specifications on nickel coordination presented in this paper will prove beneficial for developing better chelation strategies.

  12. Ab initio coordination chemistry for nickel chelation motifs.

    Directory of Open Access Journals (Sweden)

    R Jesu Jaya Sudan

    Full Text Available Chelation therapy is one of the most appreciated methods in the treatment of metal induced disease predisposition. Coordination chemistry provides a way to understand metal association in biological structures. In this work we have implemented coordination chemistry to study nickel coordination due to its high impact in industrial usage and thereby health consequences. This paper reports the analysis of nickel coordination from a large dataset of nickel bound structures and sequences. Coordination patterns predicted from the structures are reported in terms of donors, chelate length, coordination number, chelate geometry, structural fold and architecture. The analysis revealed histidine as the most favored residue in nickel coordination. The most common chelates identified were histidine based namely HHH, HDH, HEH and HH spaced at specific intervals. Though a maximum coordination number of 8 was observed, the presence of a single protein donor was noted to be mandatory in nickel coordination. The coordination pattern did not reveal any specific fold, nevertheless we report preferable residue spacing for specific structural architecture. In contrast, the analysis of nickel binding proteins from bacterial and archeal species revealed no common coordination patterns. Nickel binding sequence motifs were noted to be organism specific and protein class specific. As a result we identified about 13 signatures derived from 13 classes of nickel binding proteins. The specifications on nickel coordination presented in this paper will prove beneficial for developing better chelation strategies.

  13. Final Report: DE- FC36-05GO15063, Fundamental Studies of Advanced High-Capacity, Reversible Metal Hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Craig [Univ. of Hawaii, Honolulu, HI (United States); McGrady, Sean [Univ. of New Brunswick, Fredericton NB (Canada); Severa, Godwin [Univ. of Hawaii, Honolulu, HI (United States); Eliseo, Jennifer [Univ. of Hawaii, Honolulu, HI (United States); Chong, Marina [Univ. of Hawaii, Honolulu, HI (United States)

    2013-05-31

    The project was component of the US DOE, Metal Hydride Center of Excellence (MHCoE). The Sandia National Laboratory led center was established to conduct highly collaborative and multi-disciplinary applied R&D to develop new reversible hydrogen storage materials that meet or exceed DOE/FreedomCAR 2010 and 2015 system targets for hydrogen storage materials. Our approach entailed a wide variety of activities ranging from synthesis, characterization, and evaluation of new candidate hydrogen storage materials; screening of catalysts for high capacity materials requiring kinetics enhancement; development of low temperature methods for nano-confinement of hydrides and determining its effects on the kinetics and thermodynamics of hydrides; and development of novel processes for the direct re-hydrogenation of materials. These efforts have resulted in several advancements the development of hydrogen storage materials. We have greatly extended the fundamental knowledge about the highly promising hydrogen storage carrier, alane (AlH3), by carrying out the first crystal structure determinations and the first determination of the heats of dehydrogenation of β–AlH3 and γ-AlD3. A low-temperature homogenous organometallic approach to incorporation of Al and Mg based hydrides into carbon aerogels has been developed that that allows high loadings without degradation of the nano-porous scaffold. Nano-confinement was found to significantly improve the dehydrogenation kinetics but not effect the enthalpy of dehydrogenation. We conceived, characterized, and synthesized a novel class of potential hydrogen storage materials, bimetallic borohydrides. These novel compounds were found to have many favorable properties including release of significant amounts of hydrogen at moderate temperatures (75-190 º C). However, in situ IR studies in tandem with thermal gravimetric analysis have shown that about 0.5 equivalents of diborane are released during the

  14. Final Report: DE- FC36-05GO15063, Fundamental Studies of Advanced High-Capacity, Reversible Metal Hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Craig [University of Hawaii; McGrady, Sean [University of New Brunswick; Severa, Godwin [University of Hawaii; Eliseo, Jennifer [University of Hawaii; Chong, Marina [University of Hawaii

    2015-02-08

    The project was component of the US DOE, Metal Hydride Center of Excellence (MHCoE). The Sandia National Laboratory led center was established to conduct highly collaborative and multi-disciplinary applied R&D to develop new reversible hydrogen storage materials that meet or exceed DOE/FreedomCAR 2010 and 2015 system targets for hydrogen storage materials. Our approach entailed a wide variety of activities ranging from synthesis, characterization, and evaluation of new candidate hydrogen storage materials; screening of catalysts for high capacity materials requiring kinetics enhancement; development of low temperature methods for nano-confinement of hydrides and determining its effects on the kinetics and thermodynamics of hydrides; and development of novel processes for the direct re-hydrogenation of materials. These efforts have resulted in several advancements the development of hydrogen storage materials. We have greatly extended the fundamental knowledge about the highly promising hydrogen storage carrier, alane (AlH₃), by carrying out the first crystal structure determinations and the first determination of the heats of dehydrogenation of β–AlH₃ and γ-AlD₃. A low-temperature homogenous organometallic approach to incorporation of Al and Mg based hydrides into carbon aerogels has been developed that that allows high loadings without degradation of the nano-porous scaffold. Nano-confinement was found to significantly improve the dehydrogenation kinetics but not effect the enthalpy of dehydrogenation. We conceived, characterized, and synthesized a novel class of potential hydrogen storage materials, bimetallic borohydrides. These novel compounds were found to have many favorable properties including release of significant amounts of hydrogen at moderate temperatures (75-190ºC). However, in situ IR studies in tandem with thermal gravimetric analysis have shown that about 0.5 equivalents of diborane are released during the dehydrogenation making re

  15. Novel Chitosan-based Biomaterials

    Institute of Scientific and Technical Information of China (English)

    Mingchun Li; Meihua Xin

    2005-01-01

    @@ 1Introduction Chitosan with two long side chains of N-alkyl group is an important amphiphilic material, which has potential application in tissue engineering and drug delivery system. In this paper the amphiphilic N, N-dilauryl chitosan has been prepared by the phase transfer catalysis. The π-A isotherms of the products were measured in order to find some fundamental data for making self-assembled vesicles out of this kind of material. The LB film experiment indicates that N, N-dilauryl chitosan can form ultrathin LB film with highly ordered layer structure and smooth surface. The thickness of each layer of the LB film was measured as 1.74 nm by XRD.

  16. Albumin microspheres labeled with Ga-67 by chelation: concise communication.

    Science.gov (United States)

    Hnatowich, D J; Schlegel, P

    1981-07-01

    Albumin microspheres have been synthesized eith EDTA and DTPA chelating groups covalently bound to their surface. The microspheres may be labeled with Ga-67 at high yield (97 +/- 2%) by transcomplexation from a 0.1 M Ga-67 acetate solution. With EDTA microspheres the resulting label dissociates only slightly after no detectable dissociation over this period. By contrast, microspheres without chelating groups lose their label virtually completely under these conditions. Following intravenous administration of sized Ga-67 DTPA microspheres in mice, about (84 +/- 16)% of the activity localizes in the lungs at 5 min, with (60 +/- 7)% remaining after 2 hr. Since labeling is by chelation, the microspheres may also be tagged with other metallic radionuclides

  17. Synthesis and Characteristics of A Novel Heavy Metal Ions Chelator

    Institute of Scientific and Technical Information of China (English)

    LIU Zhuannian; SONG Yejing; HAN Xiaogang

    2012-01-01

    Polyacrylamide-urea-sulfanilamide(PUS) was prepared as a novel heavy metal ions chelator and successfully used to simultaneously remove heavy metals from wastewater effluents.The effects of reaction parameters (sodium hydroxide,material ratio,temprature and contact time) were monitored to specify the best synthesis conditions.PUS was chemically characterized by means of infrared spectroscopy (FTIR) and ultraviolet-visible (UV-Vis).The simultaneous chelation performance of PUS towards selected heavy metals ions,Ni2+,Cu2+,Pb2+,Zn2+,Cd2+ was discussed,showing that Ni2+,Cu2+,Pb2+,Zn2+ could be better chelated.It is indicated that the synthesized PUS is a potential remediation material when used for the treatment of wastewater containing metal ions.

  18. Preparation and Properties of Iminodiacetic Acid Chelate Fiber

    Directory of Open Access Journals (Sweden)

    QIAN Jin-xin

    2016-07-01

    Full Text Available The iminodiacetic acid chelate fiber(IDACF which has a property of selective adsorption, was fabricated by amination and carboxylation using chloramethylated polypropylene grafted styrene fiber as raw material. Orthogonal experiment was adopted to study the effect of temperature, time, liquor ratio and the amount of chloroacetic acid on carboxylation reaction. The maximum adsorption capacity of iminodiacetic acid chelate fiber to Cu2+ is 65.54mg·g-1, which is 10.52 times of that of Fe3+. Elementary analysis(EA, Fourier transform infrared spectrum(FT-IR, scanning electron microscopy(SEM and thermogrametry(TG were used to characterize the structure and the properties of the iminodiacetic acid chelate fiber. The results show that iminodiacetic acid has been transformed to the raw fiber successfully after amination and carboxymethylation, and IDACF has good thermal stability.

  19. Inositol hexa-phosphate: a potential chelating agent for uranium

    Energy Technology Data Exchange (ETDEWEB)

    Cebrian, D.; Tapia, A.; Real, A.; Morcillo, M.A. [Radiobiology Laboratory, Radiation Dosimetry Unit, Department of Environment, CIEMAT, Avda Complutense 22, 28040 Madrid (Spain)

    2007-07-01

    Chelation therapy is an optimal method to reduce the radionuclide-related risks. In the case of uranium incorporation, the treatment of choice is so far i.v infusion of a 1.4% sodium bicarbonate solution, but the efficacy has been proved to be not very high. In this study, we examine the efficacy of some substances: bicarbonate, citrate, diethylenetriamine pentaacetic acid (DTPA), ethidronate (EHBP) and inositol hexa-phosphate (phytic acid) to chelate uranium using a test developed by Braun et al. Different concentrations of phytic acid, an abundant component of plant seeds that is widely distributed in animal cells and tissues in substantial levels, were tested and compared to the same concentrations of sodium citrate, bicarbonate, EHBP and DTPA. The results showed a strong affinity of inositol hexa-phosphate for uranium, suggesting that it could be an effective chelating agent for uranium in vivo. (authors)

  20. Chelation therapy in intoxications with mercury, lead and copper

    DEFF Research Database (Denmark)

    Cao, yang; Skaug, Marit Aralt; Andersen, Ole;

    2015-01-01

    mobilize deposits of mercury as well as of lead into the urine. These drugs can be administered orally and have relatively low toxicity compared to the classical antidote dimercaptopropanol (BAL). d-Penicillamine has been widely used in copper overload, although 2,3-dimercaptosuccinic acid......In the present review we provide an update of the appropriate use of chelating agents in the treatment of intoxications with compounds of mercury, lead and copper. The relatively new chelators meso-2,3-dimercaptosuccinic acid (DMSA) and 2,3-dimercapto-propanesulphonate (DMPS) can effectively...... or tetrathiomolybdate may be more suitable alternatives today. In copper-toxicity, a free radical scavenger might be recommended as adjuvant to the chelator therapy...

  1. Chelation of heavy metals by potassium butyl dithiophosphate

    Institute of Scientific and Technical Information of China (English)

    Ying Xu; Zhigang Xie; Lu Xue

    2011-01-01

    Potassium butyl dithiophosphate (PBD) was developed and introduced as a new chelating agent for heavy metal removal.The synthesized PBD were characterized by IR and NMR.The effects of pH, chelating agent dosage, and other heavy metal ions on the performance of PBD in Cd2+ removal from water are investigated.Experimental results showed that the chelating agent could be used to treat acidic heavy metal wastewater.The Cd2+ removal was not affected by solution pH value within the range of 2 to 6.The Cd2+ removal rate could reach over 99%.Therefore, the deficiency of the precipitation process using hydroxide under alkaline condition can be overcome.Without the need for pH adjustment, the method could save on costs.If Cd2+ co-exists with Pb2+ and Cu2+, the affinity of the chelating agent with these three heavy metal ions was in the order of: Cu2+ > Pb2+ > Cd2+.Through PBD chelating precipitation,all the contents of Pb2+, Cd2+, and Cu2+ in wastewater met the standard levels through a one-step treatment.The one-step treatment process was superior to the process (sectional treatment is required) of precipitation with hydroxide.When the pH was between 3 and 11, the amount of leached chelated Cd2+ was much lower than that obtained by precipitation with hydroxide.Therefore, the risk of environmental pollution could be further reduced.

  2. Efficacy of chelation therapy to remove aluminium intoxication.

    Science.gov (United States)

    Fulgenzi, Alessandro; De Giuseppe, Rachele; Bamonti, Fabrizia; Vietti, Daniele; Ferrero, Maria Elena

    2015-11-01

    There is a distinct correlation between aluminium (Al) intoxication and neurodegenerative diseases (ND). We demonstrated how patients affected by ND showing Al intoxication benefit from short-term treatment with calcium disodium ethylene diamine tetraacetic acid (EDTA) (chelation therapy). Such therapy further improved through daily treatment with the antioxidant Cellfood. In the present study we examined the efficacy of long-term treatment, using both EDTA and Cellfood. Slow intravenous treatment with the chelating agent EDTA (2 g/10 mL diluted in 500 mL physiological saline administered in 2 h) (chelation test) removed Al, which was detected (using inductively coupled plasma mass spectrometry) in urine samples collected from patients over 12 h. Patients that revealed Al intoxication (expressed in μg per g creatinine) underwent EDTA chelation therapy once a week for ten weeks, then once every two weeks for a further six or twelve months. At the end of treatment (a total of 22 or 34 chelation therapies, respectively), associated with daily assumption of Cellfood, Al levels in the urine samples were analysed. In addition, the following blood parameters were determined: homocysteine, vitamin B12, and folate, as well as the oxidative status e.g. reactive oxygen species (ROS), total antioxidant capacity (TAC), oxidized LDL (oxLDL), and glutathione. Our results showed that Al intoxication reduced significantly following EDTA and Cellfood treatment, and clinical symptoms improved. After treatment, ROS, oxLDL, and homocysteine decreased significantly, whereas vitamin B12, folate and TAC improved significantly. In conclusion, our data show the efficacy of chelation therapy associated with Cellfood in subjects affected by Al intoxication who have developed ND.

  3. Heavy metal displacement in chelate-irrigated soil during phytoremediation

    Science.gov (United States)

    Madrid, F.; Liphadzi, M. S.; Kirkham, M. B.

    2003-03-01

    Heavy metals in wastewater sewage sludge (biosolids), applied to land, contaminate soils. Phytoremediation, the use of plants to clean up toxic heavy metals, might remove them. Chelating agents are added to soil to solubilize the metals for enhanced phytoextraction. Yet no studies follow the displacement and leaching of heavy metals in soil with and without roots following solubilization with chelates. The objective of this work was to determine the mobility of heavy metals in biosolids applied to the surface of soil columns (76 cm long; 17 cm diam.) with or without plants (barley; Hordeum vulgare L.). Three weeks after barley was planted, all columns were irrigated with the disodium salt of the chelating agent, EDTA (ethylenediamine tetraacetic acid) (0.5 g/kg soil). Drainage water, soil, and plants were analyzed for heavy metals (Cd, Cu, Fe, Mn, Ni, Pb, Zn). Total concentrations of the heavy metals in all columns at the end of the experiment generally were lower in the top 30 cm of soil with EDTA than without EDTA. The chelate increased concentrations of heavy metals in shoots. With or without plants, the EDTA mobilized Cd, Fe, Mn, Ni, Pb, and Zn, which leached to drainage water. Drainage water from columns without EDTA had concentrations of these heavy metals below detection limits. Only Cu did not leach in the presence of EDTA. Even though roots retarded the movement of Cd, Fe, Mn, Ni, Pb, and Zn through the EDTA-treated soil from 1 d (Cd) to 5 d (Fe), the drainage water from columns with EDTA had concentrations of Cd, Fe, Mn, and Pb that exceeded drinking water standards by 1.3, 500, 620, and 8.6 times, respectively. Because the chelate rendered Cd, Fe, Mn, Ni, Pb, and Zn mobile, it is suggested that the theory for leaching of soluble salts, put forward by Nielsen and associates in 1965, could be applied to control movement of the heavy metals for maximum uptake during chelate-assisted phytoremediation.

  4. Hard carbon nanoparticles as high-capacity, high-stability anodic materials for Na-ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, Lifen; Cao, Yuliang; Henderson, Wesley A.; Sushko, Maria L.; Shao, Yuyan; Xiao, Jie; Wang, Wei; Engelhard, Mark H.; Nie, Zimin; Liu, Jun

    2016-01-01

    Hard carbon nanoparticles (HCNP) were synthesized by the pyrolysis of a polyaniline precursor. The measured Na+ cation diffusion coefficient (10-13-10-15cm2s-1) in the HCNP obtained at 1150 °C is two orders of magnitude lower than that of Li+ in graphite (10-10-13-15cm2s-1), indicating that reducing the carbon particle size is very important for improving electrochemical performance. These measurements also enable a clear visualization of the stepwise reaction phases and rate changes which occur throughout the insertion/extraction processes in HCNP, The electrochemical measurements also show that the nano-sized HCNP obtained at 1150 °C exhibited higher practical capacity at voltages lower than 1.2 V (vs. Na/Na⁺), as well as a prolonged cycling stability, which is attributed to an optimum spacing of 0.366 nm between the graphitic layers and the nano particular size resulting in a low-barrier Na+ cation insertion. These results suggest that HCNP is a very promising high-capacity/stability anode for low cost sodium-ion batteries (SIBs).

  5. Recent advances in high-capacity free-space optical and radio-frequency communications using orbital angular momentum multiplexing

    Science.gov (United States)

    Willner, Alan E.; Ren, Yongxiong; Xie, Guodong; Yan, Yan; Li, Long; Zhao, Zhe; Wang, Jian; Tur, Moshe; Molisch, Andreas F.; Ashrafi, Solyman

    2017-02-01

    There is a continuing growth in the demand for data bandwidth, and the multiplexing of multiple independent data streams has the potential to provide the needed data capacity. One technique uses the spatial domain of an electromagnetic (EM) wave, and space division multiplexing (SDM) has become increasingly important for increased transmission capacity and spectral efficiency of a communication system. A subset of SDM is mode division multiplexing (MDM), in which multiple orthogonal beams each on a different mode can be multiplexed. A potential modal basis set to achieve MDM is to use orbital angular momentum (OAM) of EM waves. In such a system, multiple OAM beams each carrying an independent data stream are multiplexed at the transmitter, propagate through a common medium and are demultiplexed at the receiver. As a result, the total capacity and spectral efficiency of the communication system can be multiplied by a factor equal to the number of transmitted OAM modes. Over the past few years, progress has been made in understanding the advantages and limitations of using multiplexed OAM beams for communication systems. In this review paper, we highlight recent advances in the use of OAM multiplexing for high-capacity free-space optical and millimetre-wave communications. We discuss different technical challenges (e.g. atmospheric turbulence and crosstalk) as well as potential techniques to mitigate such degrading effects. This article is part of the themed issue 'Optical orbital angular momentum'.

  6. System for non-disruptive high-capacity indexed data embedding and recovery using multimedia signal covers

    Science.gov (United States)

    Collins, James C.; Agaian, Sos S.

    2011-06-01

    Over the past several years there has been an apparent shift in research focus in the area of digital steganography and steganalysis - a shift from primarily image based methods to a new focus on broader multimedia techniques. More specifically the area of digital audio steganography is of prime interest. We introduce a new high capacity, covert channel data embedding and recovery system for digital audio carrier files using a key based encoding and decoding method. It will be shown that the added information file is interleaved within the carrier file and is fully indexed allowing for segmented extraction and recovery of data at chosen start and stop points in the sampled stream. The original audio quality is not affected by the addition of this covert data. The embedded information can also be secured by a binary key string or cryptographic algorithm and resists statistical analytic detection attempts. We will also describe how this new method can be used for data compression and expansion applications in the transfer and storage of digital multimedia to increase the overall data capacity and security.

  7. Mn 3 O 4 −Graphene Hybrid as a High-Capacity Anode Material for Lithium Ion Batteries

    KAUST Repository

    Wang, Hailiang

    2010-10-13

    We developed two-step solution-phase reactions to form hybrid materials of Mn3O4 nanoparticles on reduced graphene oxide (RGO) sheets for lithium ion battery applications. Selective growth of Mn3O 4 nanoparticles on RGO sheets, in contrast to free particle growth in solution, allowed for the electrically insulating Mn3O4 nanoparticles to be wired up to a current collector through the underlying conducting graphene network. The Mn3O4 nanoparticles formed on RGO show a high specific capacity up to ∼900 mAh/g, near their theoretical capacity, with good rate capability and cycling stability, owing to the intimate interactions between the graphene substrates and the Mn 3O4 nanoparticles grown atop. The Mn3O 4/RGO hybrid could be a promising candidate material for a high-capacity, low-cost, and environmentally friendly anode for lithium ion batteries. Our growth-on-graphene approach should offer a new technique for the design and synthesis of battery electrodes based on highly insulating materials. © 2010 American Chemical Society.

  8. Ion intercalation into two-dimensional transition-metal carbides: global screening for new high-capacity battery materials.

    Science.gov (United States)

    Eames, Christopher; Islam, M Saiful

    2014-11-19

    Two-dimensional transition metal carbides (termed MXenes) are a new family of compounds generating considerable interest due to their unique properties and potential applications. Intercalation of ions into MXenes has recently been demonstrated with good electrochemical performance, making them viable electrode materials for rechargeable batteries. Here we have performed global screening of the capacity and voltage for a variety of intercalation ions (Li(+), Na(+), K(+), and Mg(2+)) into a large number of M2C-based compounds (M = Sc, Ti, V, Cr, Zr, Nb, Mo, Hf, Ta) with F-, H-, O-, and OH-functionalized surfaces using density functional theory methods. In terms of gravimetric capacity a greater amount of Li(+) or Mg(2+) can be intercalated into an MXene than Na(+) or K(+), which is related to the size of the intercalating ion. Variation of the surface functional group and transition metal species can significantly affect the voltage and capacity of an MXene, with oxygen termination leading to the highest capacity. The most promising group of M2C materials in terms of anode voltage and gravimetric capacity (>400 mAh/g) are compounds containing light transition metals (e.g., Sc, Ti, V, and Cr) with nonfunctionalized or O-terminated surfaces. The results presented here provide valuable insights into exploring a rich variety of high-capacity MXenes for potential battery applications.

  9. Stabilizing the Performance of High-Capacity Sulfur Composite Electrodes by a New Gel Polymer Electrolyte Configuration.

    Science.gov (United States)

    Agostini, Marco; Lim, Du Hyun; Sadd, Matthew; Fasciani, Chiara; Navarra, Maria Assunta; Panero, Stefania; Brutti, Sergio; Matic, Aleksandar; Scrosati, Bruno

    2017-09-11

    Increased pollution and the resulting increase in global warming are drawing attention to boosting the use of renewable energy sources such as solar or wind. However, the production of energy from most renewable sources is intermittent and thus relies on the availability of electrical energy-storage systems with high capacity and at competitive cost. Lithium-sulfur batteries are among the most promising technologies in this respect due to a very high theoretical energy density (1675 mAh g(-1) ) and that the active material, sulfur, is abundant and inexpensive. However, a so far limited practical energy density, life time, and the scaleup of materials and production processes prevent their introduction into commercial applications. In this work, we report on a simple strategy to address these issues by using a new gel polymer electrolyte (GPE) that enables stable performance close to the theoretical capacity of a low cost sulfur-carbon composite with high loading of active material, that is, 70 % sulfur. We show that the GPE prevents sulfur dissolution and reduces migration of polysulfide species to the anode. This functional mechanism of the GPE membranes is revealed by investigating both its morphology and the Li-anode/GPE interface at various states of discharge/charge using Raman spectroscopy. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Recent advances in high-capacity free-space optical and radio-frequency communications using orbital angular momentum multiplexing.

    Science.gov (United States)

    Willner, Alan E; Ren, Yongxiong; Xie, Guodong; Yan, Yan; Li, Long; Zhao, Zhe; Wang, Jian; Tur, Moshe; Molisch, Andreas F; Ashrafi, Solyman

    2017-02-28

    There is a continuing growth in the demand for data bandwidth, and the multiplexing of multiple independent data streams has the potential to provide the needed data capacity. One technique uses the spatial domain of an electromagnetic (EM) wave, and space division multiplexing (SDM) has become increasingly important for increased transmission capacity and spectral efficiency of a communication system. A subset of SDM is mode division multiplexing (MDM), in which multiple orthogonal beams each on a different mode can be multiplexed. A potential modal basis set to achieve MDM is to use orbital angular momentum (OAM) of EM waves. In such a system, multiple OAM beams each carrying an independent data stream are multiplexed at the transmitter, propagate through a common medium and are demultiplexed at the receiver. As a result, the total capacity and spectral efficiency of the communication system can be multiplied by a factor equal to the number of transmitted OAM modes. Over the past few years, progress has been made in understanding the advantages and limitations of using multiplexed OAM beams for communication systems. In this review paper, we highlight recent advances in the use of OAM multiplexing for high-capacity free-space optical and millimetre-wave communications. We discuss different technical challenges (e.g. atmospheric turbulence and crosstalk) as well as potential techniques to mitigate such degrading effects.This article is part of the themed issue 'Optical orbital angular momentum'. © 2017 The Author(s).

  11. [Peculiarities of forensic medical reconstruction of the mechanism of injuries in numerous victims of the explosion of a high-capacity blasting device].

    Science.gov (United States)

    Fradkina, N A; Kovalev, A V; Makarov, I Iu

    2013-01-01

    The systemic analysis of forensic medical practice in Moscow during the past 15 years has demonstrated the scientific, practical, and social significance of expertise of peace-time blast injuries resulting from many terrorist attacks with the use of improvised high-capacity explosive devices that caused multiple human victims. The authors emphasize the current lack of objective forensic medical criteria for the reconstruction of the mechanism of injuries in numerous victims of the explosion of a high-capacity blasting device. It dictates the necessity of their development and substantiation of their practical application.

  12. Locus coeruleus galanin expression is enhanced after exercise in rats selectively bred for high capacity for aerobic activity.

    Science.gov (United States)

    Murray, Patrick S; Groves, Jessica L; Pettett, Brett J; Britton, Steven L; Koch, Lauren G; Dishman, Rod K; Holmes, Philip V

    2010-12-01

    The neuropeptide galanin extensively coexists with norepinephrine in locus coeruleus (LC) neurons. Previous research in this laboratory has demonstrated that unlimited access to activity wheels in the home cage increases mRNA for galanin (GAL) in the LC, and that GAL mediates some of the beneficial effects of exercise on brain function. To assess whether capacity for aerobic exercise modulates this upregulation in galanin mRNA, three heterogeneous rat models were tested: rats selectively bred for (1) high intrinsic (untrained) aerobic capacity (High Capacity Runners, HCR) and (2) low intrinsic aerobic capacity (Low Capacity Runners, LCR) and (3) unselected Sprague-Dawley (SD) rats with and without free access to running wheels for 3 weeks. Following this exercise protocol, mRNA for tyrosine hydroxylase (TH) and GAL was measured in the LC. The wheel running distances between the three models were significantly different, and age contributed as a significant covariate. Both selection and wheel access condition significantly affected GAL mRNA expression, but not TH mRNA expression. GAL was elevated in exercising HCR and SD rats compared to sedentary rats while LCR rats did not differ between conditions. Overall running distance significantly correlated with GAL mRNA expression, but not with TH mRNA expression. No strain differences in GAL or TH gene expression were observed in sedentary rats. Thus, intrinsic aerobic running capacity influences GAL gene expression in the LC only insofar as actual running behavior is concerned; aerobic capacity does not influence GAL expression in addition to changes associated with running.

  13. Y-doped Li8ZrO6: A Li-Ion Battery Cathode Material with High Capacity.

    Science.gov (United States)

    Huang, Shuping; Wilson, Benjamin E; Wang, Bo; Fang, Yuan; Buffington, Keegan; Stein, Andreas; Truhlar, Donald G

    2015-09-02

    We study--experimentally and theoretically--the energetics, structural changes, and charge flows during the charging and discharging processes for a new high-capacity cathode material, Li8ZrO6 (LZO), which we study both pure and yttrium-doped. We quantum mechanically calculated the stable delithiated configurations, the delithiation energy, the charge flow during delithiation, and the stability of the delithiated materials. We find that Li atoms are easier to extract from tetrahedral sites than octahedral ones. We calculate a large average voltage of 4.04 eV vs Li/Li(+) for delithiation of the first Li atom in a primitive cell, which is confirmed by galvanostatic charge/discharge cycling data. Energy calculations indicate that topotactic delithiation is kinetically favored over decomposition into Li, ZrO2, and O2 during the charging process, although the thermodynamic energy of the topotactic reaction is less favorable. When one or two lithium atoms are extracted from a primitive cell of LZO, its volume and structure change little, whereas extraction of the third lithium greatly distorts the layered structure. The Li6ZrO6 and Li5ZrO6 delithiation products can be thermodynamically metastable to release of O2. Experimentally, materials with sufficiently small particle size for efficient delithiation and relithiation were achieved within an yttrium-doped LZO/carbon composite cathode that exhibited an initial discharge capacity of at least 200 mAh/g over the first 10 cycles, with 142 mAh/g maintained after 60 cycles. Computations predict that during the charging process, the oxygen ion near the Li vacancy is oxidized for both pure LZO and yttrium-doped LZO, which leads to a small-polaron hole.

  14. Fetal muscle gene transfer is not enhanced by an RGD capsid modification to high-capacity adenoviral vectors.

    Science.gov (United States)

    Bilbao, R; Reay, D P; Hughes, T; Biermann, V; Volpers, C; Goldberg, L; Bergelson, J; Kochanek, S; Clemens, P R

    2003-10-01

    High levels of alpha(v) integrin expression by fetal muscle suggested that vector re-targeting to integrins could enhance adenoviral vector-mediated transduction, thereby increasing safety and efficacy of muscle gene transfer in utero. High-capacity adenoviral (HC-Ad) vectors modified by an Arg-Gly-Asp (RGD) peptide motif in the HI loop of the adenoviral fiber (RGD-HC-Ad) have demonstrated efficient gene transfer through binding to alpha(v) integrins. To test integrin targeting of HC-Ad vectors for fetal muscle gene transfer, we compared unmodified and RGD-modified HC-Ad vectors. In vivo, unmodified HC-Ad vector transduced fetal mouse muscle with four-fold higher efficiency compared to RGD-HC-Ad vector. Confirming that the difference was due to muscle cell autonomous factors and not mechanical barriers, transduction of primary myogenic cells isolated from murine fetal muscle in vitro demonstrated a three-fold better transduction by HC-Ad vector than by RGD-HC-Ad vector. We hypothesized that the high expression level of coxsackievirus and adenovirus receptor (CAR), demonstrated in fetal muscle cells both in vitro and in vivo, was the crucial variable influencing the relative transduction efficiencies of HC-Ad and RGD-HC-Ad vectors. To explore this further, we studied transduction by HC-Ad and RGD-HC-Ad vectors in paired cell lines that expressed alpha(v) integrins and differed only by the presence or absence of CAR expression. The results increase our understanding of factors that will be important for retargeting HC-Ad vectors to enhance gene transfer to fetal muscle.

  15. Conductive Boron-Doped Graphene as an Ideal Material for Electrocatalytically Switchable and High-Capacity Hydrogen Storage.

    Science.gov (United States)

    Tan, Xin; Tahini, Hassan A; Smith, Sean C

    2016-12-07

    Electrocatalytic, switchable hydrogen storage promises both tunable kinetics and facile reversibility without the need for specific catalysts. The feasibility of this approach relies on having materials that are easy to synthesize, possessing good electrical conductivities. Graphitic carbon nitride (g-C4N3) has been predicted to display charge-responsive binding with molecular hydrogen-the only such conductive sorbent material that has been discovered to date. As yet, however, this conductive variant of graphitic carbon nitride is not readily synthesized by scalable methods. Here, we examine the possibility of conductive and easily synthesized boron-doped graphene nanosheets (B-doped graphene) as sorbent materials for practical applications of electrocatalytically switchable hydrogen storage. Using first-principle calculations, we find that the adsorption energy of H2 molecules on B-doped graphene can be dramatically enhanced by removing electrons from and thereby positively charging the adsorbent. Thus, by controlling charge injected or depleted from the adsorbent, one can effectively tune the storage/release processes which occur spontaneously without any energy barriers. At full hydrogen coverage, the positively charged BC5 achieves high storage capacities up to 5.3 wt %. Importantly, B-doped graphene, such as BC49, BC7, and BC5, have good electrical conductivity and can be easily synthesized by scalable methods, which positions this class of material as a very good candidate for charge injection/release. These predictions pave the route for practical implementation of electrocatalytic systems with switchable storage/release capacities that offer high capacity for hydrogen storage.

  16. High-capacity lithium-ion battery conversion cathodes based on iron fluoride nanowires and insights into the conversion mechanism.

    Science.gov (United States)

    Li, Linsen; Meng, Fei; Jin, Song

    2012-11-14

    The increasing demands from large-scale energy applications call for the development of lithium-ion battery (LIB) electrode materials with high energy density. Earth abundant conversion cathode material iron trifluoride (FeF(3)) has a high theoretical capacity (712 mAh g(-1)) and the potential to double the energy density of the current cathode material based on lithium cobalt oxide. Such promise has not been fulfilled due to the nonoptimal material properties and poor kinetics of the electrochemical conversion reactions. Here, we report for the first time a high-capacity LIB cathode that is based on networks of FeF(3) nanowires (NWs) made via an inexpensive and scalable synthesis. The FeF(3) NW cathode yielded a discharge capacity as high as 543 mAh g(-1) at the first cycle and retained a capacity of 223 mAh g(-1) after 50 cycles at room temperature under the current of 50 mA g(-1). Moreover, high-resolution transmission electron microscopy revealed the existence of continuous networks of Fe in the lithiated FeF(3) NWs after discharging, which is likely an important factor for the observed improved electrochemical performance. The loss of active material (FeF(3)) caused by the increasingly ineffective reconversion process during charging was found to be a major factor responsible for the capacity loss upon cycling. With the advantages of low cost, large quantity, and ease of processing, these FeF(3) NWs are not only promising battery cathode materials but also provide a convenient platform for fundamental studies and further improving conversion cathodes in general.

  17. High-Capacity Micrometer-Sized Li 2 S Particles as Cathode Materials for Advanced Rechargeable Lithium-Ion Batteries

    KAUST Repository

    Yang, Yuan

    2012-09-19

    Li 2S is a high-capacity cathode material for lithium metal-free rechargeable batteries. It has a theoretical capacity of 1166 mAh/g, which is nearly 1 order of magnitude higher than traditional metal oxides/phosphates cathodes. However, Li 2S is usually considered to be electrochemically inactive due to its high electronic resistivity and low lithium-ion diffusivity. In this paper, we discover that a large potential barrier (∼1 V) exists at the beginning of charging for Li 2S. By applying a higher voltage cutoff, this barrier can be overcome and Li 2S becomes active. Moreover, this barrier does not appear again in the following cycling. Subsequent cycling shows that the material behaves similar to common sulfur cathodes with high energy efficiency. The initial discharge capacity is greater than 800 mAh/g for even 10 μm Li 2S particles. Moreover, after 10 cycles, the capacity is stabilized around 500-550 mAh/g with a capacity decay rate of only ∼0.25% per cycle. The origin of the initial barrier is found to be the phase nucleation of polysulfides, but the amplitude of barrier is mainly due to two factors: (a) charge transfer directly between Li 2S and electrolyte without polysulfide and (b) lithium-ion diffusion in Li 2S. These results demonstrate a simple and scalable approach to utilizing Li 2S as the cathode material for rechargeable lithium-ion batteries with high specific energy. © 2012 American Chemical Society.

  18. Iron chelator daphnetin against Pneumocystis carinii in vitro

    Institute of Scientific and Technical Information of China (English)

    叶彬; 郑玉强; 武卫华; 张静

    2004-01-01

    Background Although there are several drugs and drug combinations for the treatment of Pneumocystis carinii (P. carinii) pneumonia, all drugs have the toxicity as well as low efficacy. Iron chelators have been proposed as a source of new drugs for combating these infections. We hypothesized that iron chelators would suppress the growth of P. carinii by deprivation of the nutritional iron required for growth. In this study, a short-term axenic culture system of P. carinii was established. Daphnetin (7,8-dihydroxycoumarin), a known iron chelator, was demonstrated to exhibit in vitro activity against P. carinii in this system. Methods P. carinii organisms were obtained from the lungs of immunosuppressed rats. The culture system consisted of Iscove Dulbecco Eagle's Minimum Essential Medium (IMDM), supplemented with S-adenosyl-L-methionine, N-acetylglucosamine, putrescine, L-cysteine, L-glutamine, 2-mercaptoethanol, and fetal bovine serum, and was maintained at 37℃, in 5% CO2, 95% O2, at the optimal pH of 8.0. The culture system was used to assess the effect of daphnetin on the proliferation of P. carinii organisms. The ultrastructures of the treated organisms were observed by transmission electron microscopy.Conclusions Daphnetin can suppress the growth of P. carinii in vitro. The efficacy of daphnetin in suppressing the the growth of P. carinii in vitro is related to its ability to chelate iron.

  19. Chelation of aluminum by combining deferasirox and deferiprone in rats.

    Science.gov (United States)

    Saljooghi, Amir Shokooh

    2012-09-01

    The hypothesis that two known chelators deferasirox and deferiprone (L1) might be more efficient as combined treatment than as single therapies in removing aluminum from the body was tested in a new acute rat model. Seven-week-old male Wistar rats received chelators: deferasirox (orally [p.o.]), L1 (p.o.) or deferasirox + L1 as 100 or 200 mg/kg dose half an hour after a single intraperitoneal administration of 6 mg Al/kg body weight in the form of chloride. Serum aluminum concentration, urinary aluminum and iron excretions were determined by graphite furnace atomic absorption spectrometry. Both chelators were effective only at the higher dose level. While deferasirox was more effective than L1 in enhancing urinary aluminum excretion, L1 was more effective than deferasirox in enhancing urinary iron excretion. In the combined treatment group, deferasirox did not increase the L1 effect on aluminum and L1 did not increase the effect of deferasirox on iron elimination. Our results support the usefulness of this animal model for preliminary in vivo testing of aluminum chelators. Urinary values were more useful due to the high variability of serum results.

  20. Laccase Immobilization by Chelated Metal Ion Coordination Chemistry

    Directory of Open Access Journals (Sweden)

    Qingqing Wang

    2014-09-01

    Full Text Available In this work, amidoxime polyacrylonitrile (AOPAN nanofibrous membrane was prepared by a reaction between PAN nanofibers and hydroxylamine hydrochloride. The AOPAN nanofibrous membranes were used for four metal ions (Fe3+, Cu2+, Ni2+, Cd2+ chelation under different conditions. Further, the competition of different metal ions coordinating with AOPAN nanofibrous membrane was also studied. The AOPAN chelated with individual metal ion (Fe3+, Cu2+, Ni2+, Cd2+ and also the four mixed metal ions were further used for laccase (Lac immobilization. Compared with free laccase, the immobilized laccase showed better resistance to pH and temperature changes as well as improved storage stability. Among the four individual metal ion chelated membranes, the stability of the immobilized enzymes generally followed the order as Fe–AOPAN–Lac > Cu–AOPAN–Lac > Ni–AOPAN–Lac > Cd–AOPAN–Lac. In addition, the immobilized enzyme on the carrier of AOPAN chelated with four mixed metal ions showed the best properties.

  1. Iron chelating active packaging: Influence of competing ions and pH value on effectiveness of soluble and immobilized hydroxamate chelators.

    Science.gov (United States)

    Ogiwara, Yoshiko; Roman, Maxine J; Decker, Eric A; Goddard, Julie M

    2016-04-01

    Many packaged foods utilize synthetic chelators (e.g. ethylenediaminetetraacetic acid, EDTA) to inhibit iron-promoted oxidation or microbial growth which would result in quality loss. To address consumer demands for all natural products, we have previously developed a non-migratory iron chelating active packaging material by covalent immobilization of polyhydroxamate and demonstrated its efficacy in delaying lipid oxidation. Herein, we demonstrate the ability of this hydroxamate-functionalized iron chelating active packaging to retain iron chelating capacity; even in the presence of competing ions common in food. Both immobilized and soluble hydroxamate chelators retained iron chelating capacity in the presence of calcium, magnesium, and sodium competing ions, although at pH 5.0 the presence of calcium reduced immobilized hydroxamate iron chelation. A strong correlation was found between colorimetric and mass spectral analysis of iron chelation by the chelating packaging material. Such chelating active packaging may support reducing additive use in product formulations, while retaining quality and shelf life.

  2. Iron(III)-chelating resins. X. Iron detoxification of human plasma with iron(III)-chelating resins

    NARCIS (Netherlands)

    Feng, M.; Feng, M.H.; van der Does, L.; Bantjes, A.; Bantjes, A.

    1994-01-01

    Iron detoxification of human blood plasma was studied with resins containing desferrioxamine B (DFO) or 3-hydroxy-2-methyl-4(1H)-pyridinone (HMP) as iron(III)-chelating groups. The behaviour of four resins was investigated: DFO-Sepharose, HMP-Sepharose and crosslinked copolymers of

  3. Bead Injection Extraction Chromatography using High-capacity Lab-on-Valve as a Front End to Inductively Coupled Plasma Mass Spectrometry for Rapid Urine Radiobioassay

    DEFF Research Database (Denmark)

    Qiao, Jixin; Hou, Xiaolin; Roos, Per

    2013-01-01

    A novel bead injection (BI) extraction chromatographic microflow system exploiting high-capacity lab-on-valve (LOV) platform coupled with inductively coupled plasma mass spectrometric detection is developed for rapid and automated determination of plutonium in human urine. A microconduit (1 mL) i...

  4. Examining the fixation kinetics of chelated and non-chelated copper and the applications to micronutrient management in semiarid alkaline soils

    Science.gov (United States)

    Udeigwe, T. K.; Eichmann, M. B.; Menkiti, M. C.; Kusi, N. Y. O.

    2016-02-01

    This study examined and compared the fixation and fixation kinetics of copper (Cu) in chelated (ethylene diamine tetraacetic acid, EDTA) and non-chelated mixed systems of micronutrients in the semiarid soils of the Southern High Plains, USA, using findings from Cu extraction studies and kinetic models. Approximately, 22 % more Cu was fixed in the non-chelated system compared to the chelated within the first 14 days with only 7 % difference between the two systems by day 90. Findings suggest a decrease in the effectiveness of chelated micronutrients over time, highlighting the significance of timing even when chelated micronutrients are used. The strengths of the relationship of change in available Cu with respect to other micronutrients (iron (Fe), manganese (Mn), and zinc (Zn)) were higher in the non-chelated system (R2: 0.68-0.94), compared to the chelated (R2: 0.42-0.81), with slopes of 0.40 (Cu-Fe), 0.31 (Cu-Mn), and 1.04 (Cu-Zn) in the non-chelated system and 0.26 (Cu-Fe), 0.22 (Cu-Mn), and 0.90 (Cu-Zn) in the chelated system. Reduction in the amount of available Cu was best described by the power function model (R2 = 0.91, SE = 0.081) in the non-chelated system and second-order model (R2 = 0.95, SE = 0.010) in the chelated system. The applications generated from this study could be used as tools for improved micronutrient management and also provide baseline data for future work in other semiarid/arid alkaline soils of the world. Findings are also more applicable to field settings, an improvement over related previous studies.

  5. Removal of cadmium from fish sauce using chelate resin.

    Science.gov (United States)

    Sasaki, Tetsuya; Araki, Ryohei; Michihata, Toshihide; Kozawa, Miyuki; Tokuda, Koji; Koyanagi, Takashi; Enomoto, Toshiki

    2015-04-15

    Fish sauce that is prepared from squid organs contains cadmium (Cd), which may be present at hazardous concentrations. Cd molecules are predominantly protein bound in freshly manufactured fish sauce, but are present in a liberated form in air-exposed fish sauce. In the present study, we developed a new method for removing both Cd forms from fish sauce using chelate resin and a previously reported tannin treatment. Sixteen-fold decreases in Cd concentrations were observed (0.78-0.05 mg/100 mL) following the removal of liberated Cd using chelate resin treatment, and the removal of protein-bound Cd using tannin treatment. Major nutritional components of fish sauce were maintained, including free amino acids and peptides, and angiotensin I-converting enzyme inhibitory and antioxidant activities.

  6. MULTIDENTATE TEREPHTHALAMIDATE AND HYDROXYPYRIDONATE LIGANDS: TOWARDS NEW ORALLY ACTIVE CHELATORS

    Energy Technology Data Exchange (ETDEWEB)

    Abergel, Rebecca J.; Raymond, Kenneth N.

    2011-07-13

    The limitations of current therapies for the treatment of iron overload or radioisotope contamination have stimulated efforts to develop new orally bioavailable iron and actinide chelators. Siderophore-inspired tetradentate, hexadentate and octadentate terephthalamidate and hydroxypyridonate ligands were evaluated in vivo as selective and efficacious iron or actinide chelating agents, with several metal loading and ligand assessment procedures, using {sup 59}Fe, {sup 238}Pu, and {sup 241}Am as radioactive tracers. The compounds presented in this study were compared to commercially available therapeutic sequestering agents [deferoxamine (DFO) for iron and diethylenetriaminepentaacetic acid (DPTA) for actinides] and are unrivaled in terms of affinity, selectivity and decorporation efficacy, which attests to the fact that high metal affinity may overcome the low bioavailability properties commonly associated to multidenticity.

  7. Lanthanides caged by the organic chelates; structural properties.

    Science.gov (United States)

    Smentek, Lidia

    2011-04-13

    The structure, in particular symmetry, geometry and morphology of organic chelates coordinated with the lanthanide ions are analyzed in the present review. This is the first part of a complete presentation of a theoretical description of the properties of systems, which are widely used in technology, but most of all, in molecular biology and medicine. The discussion is focused on the symmetry and geometry of the cages, since these features play a dominant role in the spectroscopic activity of the lanthanides caged by organic chelates. At the same time, the spectroscopic properties require more formal presentation in the language of Racah algebra, and deserve a separate analysis. In addition to the parent systems of DOTA, DOTP, EDTMP and CDTMP presented here, their modifications by various antennas are analyzed. The conclusions that have a strong impact upon the theory of the energy transfer and the sensitized luminescence of these systems are based on the results of numerical density functional theory calculations.

  8. Synthetic methodologies and spatial organization of metal chelate dendrimers and star and hyperbranched polymers.

    Science.gov (United States)

    Dzhardimalieva, Gulzhian I; Uflyand, Igor E

    2017-08-08

    The synthetic methodologies, physico-chemical peculiarities, properties, and structure of metal chelate dendrimers and star and hyperbranched polymers are considered. These compounds are subdivided into molecular, intracomplex, and macrocyclic types which in turn are classified depending on the nature of the donor atoms (N,N-, N,O-, N,S-, O,O-, O,S-, S,S-, P,P-chelates, etc.). Special attention is paid to the features of the preparation of metal chelate star polymers by "arm-first", "core-first" and click-to-chelate approaches. The main data on the synthesis, spatial structure and properties of the metal chelate hyperbranched polymers are summarized. The basic concepts and synthetic strategies leading to the different types of supramolecular metal chelate dendrimers are analyzed. The problems and future prospects of metal chelate dendrimers and star and hyperbranched polymers are outlined. The bibliography includes papers published after 2010.

  9. Low Cost, High Capacity Regenerable Sorbent for Carbon Dioxide Capture from Existing Coal-fired Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Alptekin, Gokhan [TDA Research, Inc., Wheat Ridge, CO (United States); Jayaraman, Ambalavanan [TDA Research, Inc., Wheat Ridge, CO (United States); Dietz, Steven [TDA Research, Inc., Wheat Ridge, CO (United States)

    2016-03-03

    In this project TDA Research, Inc (TDA) has developed a new post combustion carbon capture technology based on a vacuum swing adsorption system that uses a steam purge and demonstrated its technical feasibility and economic viability in laboratory-scale tests and tests in actual coal derived flue gas. TDA uses an advanced physical adsorbent to selectively remove CO2 from the flue gas. The sorbent exhibits a much higher affinity for CO2 than N2, H2O or O2, enabling effective CO2 separation from the flue gas. We also carried out a detailed process design and analysis of the new system as part of both sub-critical and super-critical pulverized coal fired power plants. The new technology uses a low cost, high capacity adsorbent that selectively removes CO2 in the presence of moisture at the flue gas temperature without a need for significant cooling of the flue gas or moisture removal. The sorbent is based on a TDA proprietary mesoporous carbon that consists of surface functionalized groups that remove CO2 via physical adsorption. The high surface area and favorable porosity of the sorbent also provides a unique platform to introduce additional functionality, such as active groups to remove trace metals (e.g., Hg, As). In collaboration with the Advanced Power and Energy Program of the University of California, Irvine (UCI), TDA developed system simulation models using Aspen PlusTM simulation software to assess the economic viability of TDA’s VSA-based post-combustion carbon capture technology. The levelized cost of electricity including the TS&M costs for CO2 is calculated as $116.71/MWh and $113.76/MWh for TDA system integrated with sub-critical and super-critical pulverized coal fired power plants; much lower than the $153.03/MWhand $147.44/MWh calculated for the corresponding amine based systems. The cost of CO2 captured for TDA’s VSA based system is $38

  10. Extraction of heavy metals from soils using biodegradable chelating agents.

    Science.gov (United States)

    Tandy, Susan; Bossart, Karin; Mueller, Roland; Ritschel, Jens; Hauser, Lukas; Schulin, Rainer; Nowack, Bernd

    2004-02-01

    Metal pollution of soils is widespread across the globe, and the clean up of these soils is a difficulttask. One possible remediation technique is ex-situ soil washing using chelating agents. Ethylenediaminetetraacetic acid (EDTA) is a very effective chelating agent for this purpose but has the disadvantage that it is quite persistent in the environment due to its low biodegradability. The aim of our work was to investigate the biodegradable chelating agents [S,S]-ethylenediaminedisuccinic acid (EDDS), iminodisuccinic acid (IDSA), methylglycine diacetic acid (MGDA), and nitrilotriacetic acid (NTA) as potential alternatives and compare them with EDTA for effectiveness. Kinetic experiments showed for all metals and soils that 24 h was the optimum extraction time. Longer times only gave minor additional benefits for heavy metal extraction but an unwanted increase in iron mobilization. For Cu at pH 7, the order of the extraction efficiency for equimolar ratios of chelating agent to metal was EDDS > NTA> IDSA > MGDA > EDTA and for Zn it was NTA > EDDS > EDTA >MGDA > IDSA. The comparatively low efficiency of EDTA resulted from competition between the heavy metals and co-extracted Ca. For Pb the order of extraction was EDTA > NTA >EDDS due to the much stronger complexation of Pb by EDTA compared to EDDS. At higher concentration of complexing agent, less difference between the agents was found and less pH dependence. There was an increase in heavy metal extraction with decreasing pH, but this was offset by an increase in Ca and Fe extraction. In sequential extractions EDDS extracted metals almost exclusively from the exchangeable, mobile, and Mn-oxide fractions. We conclude that the extraction with EDDS at pH 7 showed the best compromise between extraction efficiency for Cu, Zn, and Pb and loss of Ca and Fe from the soil.

  11. Decontamination of process equipment using recyclable chelating solvent

    Energy Technology Data Exchange (ETDEWEB)

    Jevec, J.; Lenore, C.; Ulbricht, S. [Babcock & Wilcox, Co., R& DD, Alliance, OH (United States)

    1995-10-01

    The Department of Energy (DOE) is now faced with the task of meeting decontamination and decommissioning obligations at numerous facilities by the year 2019. Due to the tremendous volume of material involved, innovative decontamination technologies are being sought that can reduce the volumes of contaminated waste materials and secondary wastes requiring disposal. This report describes the results of the performance testing of chelates and solvents for the dissolution of uranium.

  12. Flue gas desulfurization/denitrification using metal-chelate additives

    Science.gov (United States)

    Harkness, John B. L.; Doctor, Richard D.; Wingender, Ronald J.

    1986-01-01

    A method of simultaneously removing SO.sub.2 and NO from oxygen-containing flue gases resulting from the combustion of carbonaceous material by contacting the flue gas with an aqueous scrubber solution containing an aqueous sulfur dioxide sorbent and an active metal chelating agent which promotes a reaction between dissolved SO.sub.2 and dissolved NO to form hydroxylamine N-sulfonates. The hydroxylamine sulfonates are then separated from the scrubber solution which is recycled.

  13. Mineral Levels in Thalassaemia Major Patients Using Different Iron Chelators.

    Science.gov (United States)

    Genc, Gizem Esra; Ozturk, Zeynep; Gumuslu, Saadet; Kupesiz, Alphan

    2016-03-01

    The goal of the present study was to determine the levels of minerals in chronically transfused thalassaemic patients living in Antalya, Turkey and to determine mineral levels in groups using different iron chelators. Three iron chelators deferoxamine, deferiprone and deferasirox have been used to remove iron from patients' tissues. There were contradictory results in the literature about minerals including selenium, zinc, copper, and magnesium in thalassaemia major patients. Blood samples from the 60 thalassaemia major patients (the deferoxamine group, n = 19; the deferiprone group, n = 20 and the deferasirox group, n = 21) and the controls (n = 20) were collected. Levels of selenium, zinc, copper, magnesium, and iron were measured, and all of them except iron showed no significant difference between the controls and the patients regardless of chelator type. Serum copper levels in the deferasirox group were lower than those in the control and deferoxamine groups, and serum magnesium levels in the deferasirox group were higher than those in the control, deferoxamine and deferiprone groups. Iron levels in the patient groups were higher than those in the control group, and iron levels showed a significant correlation with selenium and magnesium levels. Different values of minerals in thalassaemia major patients may be the result of different dietary intake, chelator type, or regional differences in where patients live. That is why minerals may be measured in thalassaemia major patients at intervals, and deficient minerals should be replaced. Being careful about levels of copper and magnesium in thalassaemia major patients using deferasirox seems to be beneficial.

  14. Examining the fixation kinetics of chelated and non-chelated copper micronutrient and the applications to micronutrient management in semi-arid alkaline soils

    Science.gov (United States)

    Udeigwe, T. K.; Eichmann, M. B.; Menkiti, M. C.

    2015-10-01

    The relationship between the deficiency of a nutrient in plants and its total concentration in the soil is complex. This study examined and compared the fixation and fixation kinetics of copper (Cu) in chelated (Ethylene diamine tetraacetic acid, EDTA) and non-chelated mixed systems of micronutrients in the semi-arid soils of the Southern High Plains, US using findings from Cu extraction studies and kinetic models. Approximately, 22 % more Cu was fixed in the non-chelated system within the first 14 days with only 7 % difference between the two systems by day 90. Findings suggest a decrease in the effectiveness of chelated micronutrient over time, highlighting the significance of timing even when chelated micronutrients are applied. The strengths of the relationship of change in available Cu with respect to other micronutrients [iron (Fe), manganese (Mn), and zinc (Zn)] were higher in the non-chelated system (R2: 0.68-0.94), compared to the chelated (R2: 0.42-0.81) with slopes of 0.40 (Cu-Fe), 0.31 (Cu-Mn), and 1.04 (Cu-Zn) in the non-chelated system and 0.26 (Cu-Fe), 0.22 (Cu-Mn), and 0.90 (Cu-Zn) in the chelated. Reduction in the amount of available Cu was best described by the power function model (R2 = 0.91, SE = 0.081) in the non-chelated system and second order model (R2 = 0.95, SE = 0.010) in the chelated system. The applications generated from this study could be used as tools for improved micronutrient management and also provide baseline data for future work in other semi-arid/arid alkaline soils of the world. Findings are also more applicable to field settings, an improvement over related previous studies.

  15. Hydroxyurea could be a good clinically relevant iron chelator.

    Directory of Open Access Journals (Sweden)

    Khushnooma Italia

    Full Text Available Our previous study showed a reduction in serum ferritin of β-thalassemia patients on hydroxyurea therapy. Here we aimed to evaluate the efficacy of hydroxyurea alone and in combination with most widely used iron chelators like deferiprone and deferasirox for reducing iron from experimentally iron overloaded mice. 70 BALB/c mice received intraperitonial injections of iron-sucrose. The mice were then divided into 8 groups and were orally given hydroxyurea, deferiprone or deferasirox alone and their combinations for 4 months. CBC, serum-ferritin, TBARS, sTfr and hepcidin were evaluated before and after iron overload and subsequently after 4 months of drug therapy. All animals were then killed. Iron staining of the heart and liver tissue was done using Perl's Prussian Blue stain. Dry weight of iron in the heart and liver was determined by atomic absorption spectrometry. Increased serum-ferritin, TBARS, hepcidin and dry weight of iron in the liver and heart showed a significant reduction in groups treated with iron chelators with maximum reduction in the group treated with a combination of deferiprone, deferasirox and hydroxyurea. Thus hydroxyurea proves its role in reducing iron from iron overloaded mice. The iron chelating effect of these drugs can also be increased if given in combination.

  16. Elucidating Interactions between DMSO and Chelate-Based Ionic Liquids.

    Science.gov (United States)

    Chen, Hang; Wang, Xinyu; Yao, Jia; Chen, Kexian; Guo, Yan; Zhang, Pengfei; Li, Haoran

    2015-12-21

    The C-D bond stretching vibrations of deuterated dimethyl sulfoxide ([D6 ]DMSO) and the C2 -H bond stretching vibrations of 1,1,1,5,5,5-hexafluoropentane-2,4-dione (hfac) ligand in anion are chosen as probes to elucidate the solvent-solute interaction between chelate-based ionic liquids (ILs) and DMSO by vibrational spectroscopic studies. The indirect effect from the interaction of the adjacent S=O functional group of DMSO with the cation [C10 mim](+) and anion [Mn(hfac)3 ](-) of the ILs leads to the blue-shift of the C-D stretching vibrations of DMSO. The C2 -H bond stretching vibrations in hfac ligand is closely related to the ionic hydrogen bond strength between the cation and anion of chelate-based ILs. EPR studies reveal that the crystal field of the central metal is kept when the chelate-based ILs are in different microstructure environment in the solution.

  17. Tumor targeting of radiolabeled antibodies using HYNIC chelate

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Tae Sup; Chung, Wee Sup; Woo, Kwang Sun; Choi, Tae Hyun; Chung, Hye Kyung; Lee, Myung Jin; Kim, So Yeon; Jung, Jae Ho; Choi, Chang Woon; Lim, Sang Moo [KIRAMS, Seoul (Korea, Republic of); Darwati, Siti [National Nuclear Energy Agency, Tangerang (Indonesia)

    2004-07-01

    There is an increasing interest in the use of labeled antibodies for diagnosis of cancers as well as for therapy. Various radiolabeling methods have been used in order to obtain better tumor specific targeting for detection and therapy. It was generally used to tumor targeted immunotherapy and immunodetection that lym-1, mouse monoclonal antibody, was specific binding to surface antigen of Raji. The 3E8 antibody was produced from humanized anti-TAG-72 monoclonal antibody (AKA) by amino acid change in 95-99 residues of heavy chain complementary determinant regions (HCDRs) 3 using phage displayed library technology. In this study, we are investigating the usefulness of HYNIC chelate as a bifunctional chelating agent in radioimmunodetecton of tumor. Two types of antibodies, Lym-1 and 3E8, were used for the conjugation with HYNIC chelate. Lym-1 and 3E8 are specific antibodies to surface antigen of Non-Hogkin's lymphoma and TAG-72 antigen of colorectal carcinoma, respectively. We prepare HYNIC-antibody conjugates, determine radiolabeling yield with {sup 99m}Tc and evaluate tumor targeting in tumor bearing nude mice model.

  18. Chelate forms of biometalls. Theoretical aspects of obtaining and characteristics

    Directory of Open Access Journals (Sweden)

    A. Kapustyan

    2017-04-01

    Full Text Available The problem of microelements bioavailability is highlighted and the correct ways of its solution are substantiated as a result of generalization of theoretical aspects of obtaining of the biometals chelate forms. The characteristics of the main biogenic elements, their physiological significance, electrochemical properties are presented. The main examples of the participation of biometals in various biological processes are given. The properties and the structure peculiarities of biometals coordination complexes are considered in detail. It is shown that in obtaining of biometals chelate forms, there is the mutual selectivity and the affinity of biometals and ligands. The main factors of obtaining a hard metal complex are given. Potential bioligands for obtaining bioavailable forms of microelements are detailed. Among them there are amino acids, peptides, proteins, nucleic acids, carbohydrates. The possible character of complexation depending on the nature of the bioligand is indicated. Practical examples of preparation of biometals mixed ligand complexes are given. The expediency of using metabolic products and processing of lactic acid bacteria as promising components of mixed ligand chelate complexes is substantiated. These substances contain in their composition a mass of potential donor atoms that are capable to form covalent and coordination bonds with biomethalles, and also possess high biological and immunotropic activities. The use of this system in the biocoordination compounds of the "metals of life" can provide a synergistic effect of the components, significantly to expand the range of their physiological activity and to increase the degree of assimilation by the body.

  19. Copper and Zinc Chelation as a Treatment of Alzheimer's Disease

    Science.gov (United States)

    Hodak, Miroslav; Bernholc, Jerry

    2014-03-01

    Alzheimer's disease (AD) is a neurodegenerative disorder affecting millions of people in the U.S. The cause of the disease remains unknown, but amyloid- β (A β), a short peptide, is considered causal its pathogenesis. At cellular level, AD is characterized by deposits mainly composed of A β that also contain elevated levels of transition metals ions. Targeting metals is a promising new strategy for AD treatment, which uses moderately strong metal chelators to sequester them from A β or the environment. PBT2 is a chelating compound that has been the most promising in clinical trials. In our work, we use computer simulations to investigate complexes of a close analog of PBT2 with Cu2+ and Zn2+ ions. The calculations employ KS/FD DFT method, which combines Kohn-Sham DFT with the frozen-density DFT to achieve efficient description of explicit solvent beyond the first solvation shell. Our work is based on recent experiments and examines both 1:1 and 2:1 chelator-metal stochiometries detected experimentally. The results show that copper attaches more strongly than zinc, find that 1:1 complexes involve water in the first coordination shell and determine which one of several possible 2:1 geometries is the most preferable.

  20. Development of Advanced Li Rich xLi2MO3 (1 x)LiMO2 Composite Cathode for High Capacity Li Ion Batteries

    Science.gov (United States)

    2016-12-22

    powders. The XRD spectra were collected in a range of 2θ values from 10 o to 70 o at a scanning rate of 0.5 degrees per min and a step size of 0.02 o...AFRL-AFOSR-JP-TR-2017-0003 Development of Advanced Li Rich xLi2MO3-(1-x)LiMO2 Composite Cathode for High Capacity Li Ion Batteries Kuan-Zong Fung...Li Rich xLi2MO3-(1-x)LiMO2 Composite Cathode for High Capacity Li Ion Batteries 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA2386-15-1-4115 5c.  PROGRAM

  1. Chelation therapy in Wilson's disease: from D-penicillamine to the design of selective bioinspired intracellular Cu(I) chelators.

    Science.gov (United States)

    Delangle, Pascale; Mintz, Elisabeth

    2012-06-01

    Wilson's disease is an orphan disease due to copper homeostasis dysfunction. Mutations of the ATP7B gene induces an impaired functioning of a Cu-ATPase, impaired Cu detoxification in the liver and copper overload in the body. Indeed, even though copper is an essential element, which is used as cofactor by many enzymes playing vital roles, it becomes toxic when in excess as it promotes cytotoxic reactions leading to oxidative stress. In this perspective, human copper homeostasis is first described in order to explain the mechanisms promoting copper overload in Wilson's disease. We will see that the liver is the main organ for copper distribution and detoxification in the body. Nowadays this disease is treated life-long by systemic chelation therapy, which is not satisfactory in many cases. Therefore the design of more selective and efficient drugs is of great interest. A strategy to design more specific chelators to treat localized copper accumulation in the liver will then be presented. In particular we will show how bioinorganic chemistry may help in the design of such novel chelators by taking inspiration from the biological copper cell transporters.

  2. Cobalt Oxide Porous Nanofibers Directly Grown on Conductive Substrate as a Binder/Additive-Free Lithium-Ion Battery Anode with High Capacity.

    Science.gov (United States)

    Liu, Hao; Zheng, Zheng; Chen, Bochao; Liao, Libing; Wang, Xina

    2017-12-01

    In order to reduce the amount of inactive materials, such as binders and carbon additives in battery electrode, porous cobalt monoxide nanofibers were directly grown on conductive substrate as a binder/additive-free lithium-ion battery anode. This electrode exhibited very high specific discharging/charging capacities at various rates and good cycling stability. It was promising as high capacity anode materials for lithium-ion battery.

  3. Preparation of Polysulfone-supported Phosphoramidic Acid Type Chelate Membrane and Its Sorption Properties for Ag+

    Institute of Scientific and Technical Information of China (English)

    WANG Bing; CUI Yong-fang; DU Qi-yun; PEI Guang-ling

    2002-01-01

    A blending chelate filter membrane with high chelate capacity for Ag+ has been prepared by blending of phosphoramidic acid resin and polysulfone. The major parameters influencing structure of the chelate filter membranes such as the blending ratio, phosphoramidic acid resin grain size and temperature of casting solution have been studied. The relationship among the chelate amount of Ag+, pH value, Ag+ concentration and phosphoramidic acid resin grain diameter were examined. The chelate filter membrane had a capacity of1438μg/cm2 for Ag+ under appropriate conditions.Sorption isotherm of Ag + could be expressed with the Freundlich sorption model. The dynamic chelate experiments proved that the sorption and desorption of membranes could be realized simultaneously for Ag+.

  4. CCCCC pentadentate chelates with planar Möbius aromaticity and unique properties

    Science.gov (United States)

    Zhu, Congqing; Yang, Caixia; Wang, Yongheng; Lin, Gan; Yang, Yuhui; Wang, Xiaoyong; Zhu, Jun; Chen, Xiaoyuan; Lu, Xin; Liu, Gang; Xia, Haiping

    2016-01-01

    The coordinating atoms in polydentate chelates are primarily heteroatoms. We present the first examples of pentadentate chelates with all binding atoms of the chelating agent being carbon atoms, denoted as CCCCC chelates. Having up to five metal-carbon bonds in the equatorial plane has not been previously observed in transition metal chemistry. Density functional theory calculations showed that the planar metallacycle has extended Craig-Möbius aromaticity arising from 12-center–12-electron dπ-pπ π-conjugation. These planar chelates have broad absorption in the ultraviolet-visible–near-infrared region and, thus, notable photothermal performance upon irradiation by an 808-nm laser, indicating that these chelates have potential applications in photothermal therapy. The combination of facile synthesis, high stability, and broad absorption of these complexes could make the polydentate carbon chain a novel building block in coordination chemistry. PMID:27574707

  5. A Review on Iron Chelators in Treatment of Iron Overload Syndromes

    Science.gov (United States)

    Mobarra, Naser; Shanaki, Mehrnoosh; Ehteram, Hassan; Nasiri, Hajar; Sahmani, Mehdi; Saeidi, Mohsen; Goudarzi, Mehdi; Pourkarim, Hoda; Azad, Mehdi

    2016-01-01

    Iron chelation therapy is used to reduce iron overload development due to its deposition in various organs such as liver and heart after regular transfusion. In this review, different iron chelators implicated in treatment of iron overload in various clinical conditions have been evaluated using more up-to-date studies focusing on these therapeutic agents. Deferoxamine, Deferiprone and Deferasirox are the most important specific US FDA-approved iron chelators. Each of these chelators has their own advantages and disadvantages, various target diseases, levels of deposited iron and clinical symptoms of the afflicted patients which may affect their selection as the best modality. Taken together, in many clinical disorders, choosing a standard chelator does not have an accurate index which requires further clarifications. The aim of this review is to introduce and compare the different iron chelators regarding their advantages and disadvantages, usage dose and specific applications. PMID:27928480

  6. Zinc chelation reduces hippocampal neurogenesis after pilocarpine-induced seizure.

    Directory of Open Access Journals (Sweden)

    Jin Hee Kim

    Full Text Available Several studies have shown that epileptic seizures increase hippocampal neurogenesis in the adult. However, the mechanism underlying increased neurogenesis after seizures remains largely unknown. Neurogenesis occurs in the subgranular zone (SGZ of the hippocampus in the adult brain, although an understanding of why it actively occurs in this region has remained elusive. A high level of vesicular zinc is localized in the presynaptic terminals of the SGZ. Previously, we demonstrated that a possible correlation may exist between synaptic zinc localization and high rates of neurogenesis in this area after hypoglycemia. Using a lithium-pilocarpine model, we tested our hypothesis that zinc plays a key role in modulating hippocampal neurogenesis after seizure. Then, we injected the zinc chelator, clioquinol (CQ, 30 mg/kg, into the intraperitoneal space to reduce brain zinc availability. Neuronal death was detected with Fluoro Jade-B and NeuN staining to determine whether CQ has neuroprotective effects after seizure. The total number of degenerating and live neurons was similar in vehicle and in CQ treated rats at 1 week after seizure. Neurogenesis was evaluated using BrdU, Ki67 and doublecortin (DCX immunostaining 1 week after seizure. The number of BrdU, Ki67 and DCX positive cell was increased after seizure. However, the number of BrdU, Ki67 and DCX positive cells was significantly decreased by CQ treatment. Intracellular zinc chelator, N,N,N0,N-Tetrakis (2-pyridylmethyl ethylenediamine (TPEN, also reduced seizure-induced neurogenesis in the hippocampus. The present study shows that zinc chelation does not prevent neurodegeneration but does reduce seizure-induced progenitor cell proliferation and neurogenesis. Therefore, this study suggests that zinc has an essential role for modulating hippocampal neurogenesis after seizure.

  7. Complexation and Antimicrobial Studies of Some Divalent Metal Chelates

    Directory of Open Access Journals (Sweden)

    Suparna Ghosh

    2010-01-01

    Full Text Available Metal chelates of Ni(II and Cu(II with the ligand 5-acetamido-1,3,4-thiadiazole-2-sulphonamide have been synthesized. The isolated compounds have been characterized by elemental analysis, molar conductivity, magnetic moment, electronic and IR spectral studies. The analytical data reflects the metal to ligand stoichiometry to be 1: 2. The conductivity data of the complexes also suggests their non-electrolytic nature. The stability constants and free energy change for the complexes have been calculated.. Ligand and their complexes have been screened for their biological activity and the data show good activity of these complexes and ligands.

  8. Encapsulation and retention of chelated-copper inside hydrophobic nanoparticles

    DEFF Research Database (Denmark)

    Hervella, Pablo; Ortiz, Elisa Parra; Needham, David

    2016-01-01

    MOTIVATION: In the field of imaging, (18)F-fluorodeoxyglucose (FDG) PET imaging allows evaluation of glucose metabolism and is the most widely used imaging agent clinically for metastatic cancer. While it can certainly detect the metastatic disease, in order to provide a more fully "individualized...... Trioleate (Triolein) with copper using the hydrophobic chelator Octaethyl porphyrin (OEP). RESEARCH PLAN AND METHODS: The research plan for this study was to (1) Formulate nanoparticles and control nanoparticle size using a modification of the solvent injection technique, named fast ethanol injection; (2...

  9. Combined Chelation Therapy with Deferasirox and Deferoxamine in Thalassemia

    OpenAIRE

    Lal, Ashutosh; Porter, John; Sweeters, Nancy; Ng, Vivian; Evans, Patricia; Neumayr, Lynne; Kurio, Gregory; Harmatz, Paul; Vichinsky, Elliott

    2012-01-01

    Iron overload is the primary cause of mortality and morbidity in thalassemia major despite advances in chelation therapy. We performed a pilot clinical trial to evaluate the safety and efficacy of combined therapy with deferasirox (DFX, 20-30 mg/kg daily) and deferoxamine (DFO, 35-50 mg/kg on 3-7 days/week) in 22 patients with persistent iron overload or organ damage. In the 18 subjects completing 12 months of therapy, median liver iron concentration decreased by 31% from 17.4 mg/g (range 3.9...

  10. Synthesis and Adsorption Properties of Polystyrene-supported Chelating Resins Containing Heterocyclic Functional Groups

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    A series of new chelating resins with incorporating heterocyclic functional groups:pyridine, thiadizole, benzothizole into macroporous chloromethylated polystyrene were synthesized via hydrophilic spacer arm of polyethylene glycol co ntaining sulfur. These chelating resins were found to show high adsorption capacities for Ag+, Hg2+, Au3+ and Pd2+, and the presence of spacer arm can enhance adsorption ability due to increase the hydrophilicity of the chelating resins.

  11. Alkenes as Chelating Groups in Diastereoselective Additions of Organometallics to Ketones.

    Science.gov (United States)

    Raffier, Ludovic; Gutierrez, Osvaldo; Stanton, Gretchen R; Kozlowski, Marisa C; Walsh, Patrick J

    2014-10-13

    Alkenes have been discovered to be chelating groups to Zn(II), enforcing highly stereoselective additions of organozincs to β,γ-unsaturated ketones. (1)H NMR studies and DFT calculations provide support for this surprising chelation mode. The results expand the range of coordinating groups for chelation-controlled carbonyl additions from heteroatom Lewis bases to simple C-C double bonds, broadening the 60 year old paradigm.

  12. Performance of Nonmigratory Iron Chelating Active Packaging Materials in Viscous Model Food Systems.

    Science.gov (United States)

    Roman, Maxine J; Decker, Eric A; Goddard, Julie M

    2015-09-01

    Many packaged food products undergo quality deterioration due to iron promoted oxidative reactions. Recently, we have developed a nonmigratory iron chelating active packaging material that represents a novel approach to inhibit oxidation of foods while addressing consumer demands for "cleanˮ labels. A challenge to the field of nonmigratory active packaging is ensuring that surface-immobilized active agents retain activity in a true food system despite diffusional limitations. Yet, the relationship between food viscosity and nonmigratory active packaging activity retention has never been characterized. The objective of this study was to investigate the influence of food viscosity on iron chelation by a nonmigratory iron chelating active packaging material. Methyl cellulose was added to aqueous buffered iron solutions to yield model systems with viscosities ranging from ∼1 to ∼10(5)  mPa·s, representing viscosities ranging from beverage to mayonnaise. Iron chelation was quantified by material-bound iron content using colorimetry and inductively coupled plasma-optical emission spectrometry (ICP-OES).  Maximum iron chelation was reached in solutions up to viscosity ∼10(2)  mPa·s. In more viscous solutions (up to ∼10(4)  mPa·s), there was a significant decrease in iron chelating capacity (P influence of different food hydrocolloids on the performance of nonmigratory iron chelating active packaging was characterized. Methyl cellulose and carrageenan did not compete with the material for specific iron chelation (P > 0.05). Materials retained 32% to 45% chelating capacity when in contact with competitively chelating hydrocolloids guar gum, locust bean gum, and xanthan gum. This work demonstrates the potential application of nonmigratory iron chelating active packaging in liquid and semi-liquid foods to allow for the removal of synthetic chelators, while maintaining food quality.

  13. Effect of metal chelators on the oxidative stability of model wine.

    Science.gov (United States)

    Kreitman, Gal Y; Cantu, Annegret; Waterhouse, Andrew L; Elias, Ryan J

    2013-10-02

    Oxidation is a major problem with respect to wine quality, and winemakers have few tools at their disposal to control it. In this study, the effect of exogenous Fe(II) (bipyridine; Ferrozine) and Fe(III) chelators (ethylenediaminetetraacetic acid, EDTA; phytic acid) on nonenzymatic wine oxidation was examined. The ability of these chelators to affect the formation of 1-hydroxyethyl radicals (1-HER) and acetaldehyde was measured using a spin trapping technique with electron paramagnetic resonance (EPR) and by HPLC-PDA, respectively. The chelators were then investigated for their ability to prevent the oxidative loss of an important aroma-active thiol, 3-mercaptohexan-1-ol (3MH). The Fe(II)-specific chelators were more effective than the Fe(III) chelators with respect to 1-HER inhibition during the early stages of oxidation and significantly reduced oxidation markers compared to a control during the study. However, although the addition of Fe(III) chelators was less effective or even showed an initial pro-oxidant activity, the Fe(III) chelators proved to be more effective antioxidants compared to Fe(II) chelators after 8 days of accelerated oxidation. In addition, it is shown for the first time that Fe(II) and Fe(III) chelators can significantly inhibit the oxidative loss of 3MH in model wine.

  14. Selective separation of indium by iminodiacetic acid chelating resin

    Energy Technology Data Exchange (ETDEWEB)

    Fortes, M.C.B.; Benedetto, J.S. [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Martins, A.H. [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Engenharia Metalurgica e de Materiais]. E-mail: ahmartin@demet.ufmg.br

    2007-04-15

    - Indium can be recovered by treating residues, flue dusts, slags, and metallic intermediates in zinc smelting. This paper investigates the adsorption characteristics of indium and iron on an iminodiacetic acid chelating resin, Amberlite{sup R} IRC748 (Rohm and Haas Co.-USA). High concentrations of iron are always present in the aqueous feed solution of indium recovery. In addition, the chemical behaviour of iron in adsorptive systems is similar to that of indium. The metal concentrations in the aqueous solution were based on typical indium sulfate leach liquor obtained from zinc hydrometallurgical processing in a Brazilian plant. The ionic adsorption experiments were carried out by the continuous column method. Amberlite{sup R} IRC748 resin had a high affinity for indium under acidic conditions. Indium ions adsorbed onto the polymeric resin were eluted with a 0.5 mol/dm{sup 3} sulphuric acid solution passed through the resin bed in the column. 99.5% pure indium sulfate aqueous solution was obtained using the iminodiacetic acid chelating resin Amberlite{sup R} IRC748. (author)

  15. Chelating polymeric beads as potential therapeutics for Wilson's disease.

    Science.gov (United States)

    Mattová, Jana; Poučková, Pavla; Kučka, Jan; Skodová, Michaela; Vetrík, Miroslav; Stěpánek, Petr; Urbánek, Petr; Petřík, Miloš; Nový, Zbyněk; Hrubý, Martin

    2014-10-01

    Wilson's disease is a genetic disorder caused by a malfunction of ATPase 7B that leads to high accumulation of copper in the organism and consequent toxic effects. We propose a gentle therapy to eliminate the excessive copper content with oral administration of insoluble non-resorbable polymer sorbents containing selective chelating groups for copper(II). Polymeric beads with the chelating agents triethylenetetramine, N,N-di(2-pyridylmethyl)amine, and 8-hydroxyquinoline (8HQB) were investigated. In a preliminary copper uptake experiment, we found that 8HQB significantly reduced copper uptake (using copper-64 as a radiotracer) after oral administration in Wistar rats. Furthermore, we measured organ radioactivity in rats to demonstrate that 8HQB radiolabelled with iodine-125 is not absorbed from the gastrointestinal tract after oral administration. Non-resorbability and the blockade of copper uptake were also confirmed with small animal imaging (PET/CT) in mice. In a long-term experiment with Wistar rats fed a diet containing the polymers, we have found that there were no signs of polymer toxicity and the addition of polymers to the diet led to a significant reduction in the copper contents in the kidneys, brains, and livers of the rats. We have shown that polymers containing specific ligands could potentially be novel therapeutics for Wilson's disease.

  16. Functional characterization of the chloroplast ferric chelate oxidoreductase enzyme.

    Science.gov (United States)

    Solti, Adám; Müller, Brigitta; Czech, Viktória; Sárvári, Éva; Fodor, Ferenc

    2014-05-01

    Iron (Fe) has an essential role in the biosynthesis of chlorophylls and redox cofactors, and thus chloroplast iron uptake is a process of special importance. The chloroplast ferric chelate oxidoreductase (cFRO) has a crucial role in this process but it is poorly characterized. To study the localization and mechanism of action of cFRO, sugar beet (Beta vulgaris cv Orbis) chloroplast envelope fractions were isolated by gradient ultracentrifugation, and their purity was tested by western blotting against different marker proteins. The ferric chelate reductase (FCR) activity of envelope fractions was studied in the presence of NAD(P)H (reductants) and FAD coenzymes. Reduction of Fe(III)-ethylenediaminetetraacetic acid was monitored spectrophotometrically by the Fe(II)-bathophenanthroline disulfonate complex formation. FCR activity, that is production of free Fe(II) for Fe uptake, showed biphasic saturation kinetics, and was clearly associated only to chloroplast inner envelope (cIE) vesicles. The reaction rate was > 2.5 times higher with NADPH than with NADH, which indicates the natural coenzyme preference of cFRO activity and its dependence on photosynthesis. FCR activity of cIE vesicles isolated from Fe-deficient plants also showed clear biphasic kinetics, where the KM of the low affinity component was elevated, and thus this component was down-regulated.

  17. Magnetic memory effect in chelated zero valent iron nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Ghosh, N., E-mail: nilotpal@vit.ac.in [School of Advanced Sciences, VIT University, Vellore 632014, Tamilnadu (India); Mandal, B.K.; Mohan Kumar, K. [School of Advanced Sciences, VIT University, Vellore 632014, Tamilnadu (India)

    2012-11-15

    We report the study of nonequilibrium magnetic behavior of air stable zero valent iron nanoparticles synthesized in presence of N-cetyl-N,N,N-trimethyl ammonium bromide chelating agent. X-ray photoelectron spectroscopy study has suggested the presence of iron oxides on nZVI surfaces. Zero-field-cooled and field-cooled magnetization measurements have been carried out at 20-300 K and 100 Oe. For field-cooled measurements with 1 h stops at 200, 100 and 50 K when compared with the warming cycle, we found the signature of magnetic memory effect. A study of magnetic relaxation at the same temperatures shows the existence of two relaxation times. - Highlights: Black-Right-Pointing-Pointer Zero valent iron nanoparticles are synthesized with CTAB chelating agent. Black-Right-Pointing-Pointer X-ray photoelectron spectroscopy study has shown the presence of iron oxide. Black-Right-Pointing-Pointer Magnetization measurement has displayed signature of magnetic memory. Black-Right-Pointing-Pointer Magnetization measurement with time suggested presence of 2 relaxation times.

  18. Using iron chelating agents to enhance dermatological PDT

    Science.gov (United States)

    Curnow, Alison; Dogra, Yuktee; Winyard, Paul; Campbell, Sandra

    2009-06-01

    Topical protoporphyrin IX (PPIX) induced photodynamic therapy (PDT) of basal cell carcinoma (BCC) produces good clinical outcomes with excellent cosmesis as long as the disease remains superficial. Efficacy for nodular BCC however appears inferior to standard treatment unless repeat treatments are performed. Enhancement is therefore required and is possible by employing iron chelating agents to temporarily increase PPIX accumulation above the levels normally obtained using aminolevulinic acid (ALA) or the methyl ester of ALA (MAL) alone. In vitro studies investigated the effect of the novel iron chelator, CP94 on necrotic or apoptotic cell death in cultured human skin fibroblasts and epidermal carcinoma cells incubated with MAL. Furthermore, following a dose escalating safety study conducted with ALA in patients, an additional twelve nodular BCCs were recruited for topical treatment with standard MAL-PDT +/- increasing doses of CP94. Six weeks later following clinical assessment, the whole treatment site was excised for histological analysis. CP94 produced greater cell death in vitro when administered in conjunction with MAL than this porphyrin precursor could produce when administered alone. Clinically, PDT treatment using Metvix + CP94 was a simple and safe modification associated with a trend of reduced tumor thickness with increasing CP94 dose.

  19. Deferasirox, an oral chelator in the treatment of iron overload

    Directory of Open Access Journals (Sweden)

    I. Portioli

    2013-05-01

    Full Text Available BACKGROUND Deferasirox is a once-daily oral iron chelator developed for treating iron overload complicating long-term transfusion therapy in patients with diseases such as beta-thalassemia and myelodysplastic syndromes. Iron overload can damage the liver, pancreas and the heart. Deferoxamine, the only other drug approved for iron chelation, can prevent these effects but requires parenteral administration. Deferasirox has been approved after a one-year, open-label trial in patients ≥ 2 years old with beta-thalassemia and transfusional emosiderosis randomized to once-daily oral 5, 10, 20, 30 mg/kg/day in comparison of subcutaneous deferoxamine 20-60 mg/mg/kg/day x 5/week. CONCLUSIONS Deferasirox 20-30 mg/kg/day produced reductions in liver iron concentration (LIC similar to those with deferoxamine. Adverse effect of deferasirox (increases of serum creatinine and aminotransferases, including the gastrointestinal ones, are similar but more frequent than those occurring with deferoxamine. Information is lacking on the effects of deferasirox on cardiac iron and cardiac dysfunction which is the most serious complication of transfusional iron overload.

  20. Selective separation of indium by iminodiacetic acid chelating resin

    Directory of Open Access Journals (Sweden)

    M. C. B. Fortes

    2007-06-01

    Full Text Available Indium can be recovered by treating residues, flue dusts, slags, and metallic intermediates in zinc smelting. This paper investigates the adsorption characteristics of indium and iron on an iminodiacetic acid chelating resin, Amberlite®IRC748 (Rohm and Haas Co.-USA. High concentrations of iron are always present in the aqueous feed solution of indium recovery. In addition, the chemical behaviour of iron in adsorptive systems is similar to that of indium. The metal concentrations in the aqueous solution were based on typical indium sulfate leach liquor obtained from zinc hydrometallurgical processing in a Brazilian plant. The ionic adsorption experiments were carried out by the continuous column method. Amberlite®IRC748 resin had a high affinity for indium under acidic conditions. Indium ions adsorbed onto the polymeric resin were eluted with a 0.5mol/dm³ sulphuric acid solution passed through the resin bed in the column. 99.5% pure indium sulfate aqueous solution was obtained using the iminodiacetic acid chelating resin Amberlite®IRC748.

  1. Phytic acid: an alternative root canal chelating agent.

    Science.gov (United States)

    Nassar, Mohannad; Hiraishi, Noriko; Tamura, Yukihiko; Otsuki, Masayuki; Aoki, Kazuhiro; Tagami, Junji

    2015-02-01

    The objectives of this study were to investigate the effect of phytic acid, inositol hexakisphosphate (IP6), as a final rinse on the surface of instrumented root canals and smear-layered flat dentin surfaces treated with sodium hypochlorite (NaOCl) and to evaluate its effect on the viability and alkaline phosphatase activity of osteoblast-like cells (MC3T3-E1). The universally accepted chelating agent EDTA was used as the control in all conducted experiments. Root canals of human canines were instrumented with rotary files and irrigated with 5% NaOCl, followed by a final rinse of 17% EDTA (1 minute), 1% IP6 (1 minute or 30 seconds), or distilled water. NaOCl-treated flat coronal dentin surfaces were also treated with 17% EDTA (1 minute), 1% IP6 (1 minute or 30 seconds), or distilled water. The presence or absence of smear layer was evaluated with scanning electron microscopy. Cell viability and alkaline phosphatase assays were performed to evaluate the effect of IP6 and EDTA on cultured MC3T3-E1 cells. The results demonstrated the ability of IP6 to remove the smear layer from instrumented root canals and flat coronal dentin surfaces. When compared with EDTA, IP6 was less cytotoxic and did not affect the differentiation of MC3T3-E1 cells. IP6 shows the potential to be an effective and biocompatible chelating agent. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  2. Multivalent chelators for spatially and temporally controlled protein functionalization.

    Science.gov (United States)

    You, Changjiang; Piehler, Jacob

    2014-05-01

    Site-specific protein modification-e.g. for immobilization or labelling-is a key prerequisite for numerous bioanalytical applications. Although modification by use of short peptide tags is particularly attractive, efficient and bio-orthogonal systems are still lacking. Here, we review the application of multivalent chelators (MCH) for high-affinity yet reversible recognition of oligohistidine (His)-tagged proteins. MCH are based on multiple nitrilotriacetic acid (NTA) moieties grafted on to molecular scaffolds suitable for conjugation to surfaces, probes or other biomolecules. Reversible interaction with the His-tag is mediated via transition metal ions chelated by the NTA moieties. The small size and biochemical compatibility of these recognition units and the possibility of rapid dissociation of the interaction with His-tagged proteins despite sub-nanomolar binding affinity, enable distinct and versatile handling and modification of recombinant proteins. In this review, we briefly introduce the key principles and features of MCH-His-tag interactions and recapitulate the broad spectrum of bioanalytical applications with a focus on quantitative protein interaction analysis on micro or nano-patterned solid surfaces and specific protein labelling in living cells.

  3. Neurodegenerative diseases and therapeutic strategies using iron chelators.

    Science.gov (United States)

    Ward, Roberta J; Dexter, David T; Crichton, Robert R

    2015-01-01

    This review will summarise the current state of our knowledge concerning the involvement of iron in various neurological diseases and the potential of therapy with iron chelators to retard the progression of the disease. We first discuss briefly the role of metal ions in brain function before outlining the way by which transition metal ions, such as iron and copper, can initiate neurodegeneration through the generation of reactive oxygen and nitrogen species. This results in protein misfolding, amyloid production and formation of insoluble protein aggregates which are contained within inclusion bodies. This will activate microglia leading to neuroinflammation. Neuroinflammation plays an important role in the progression of the neurodegenerative diseases, with activated microglia releasing pro-inflammatory cytokines leading to cellular cell loss. The evidence for metal involvement in Parkinson's and Alzheimer's disease as well as Friedreich's ataxia and multiple sclerosis will be presented. Preliminary results from trials of iron chelation therapy in these neurodegenerative diseases will be reviewed. Copyright © 2015 Elsevier GmbH. All rights reserved.

  4. 壳聚糖基骨组织工程支架材料的研究进展%The development application of chitosan-based in bone tissue engineering

    Institute of Scientific and Technical Information of China (English)

    白永庆; 张璐

    2012-01-01

    壳聚糖是甲壳素脱乙酰基的产物,是第二大天然高分子,由于其良好的生物相容性、生物可降解性和成型性,作为骨组织工程支架材料越来越受到重视.对壳聚糖为主的复合骨组织工程支架的相关研究进行综述。可以掌握其在不同的材料体系中的功能作用,并可预见壳聚糖基生物材料在骨组织工程中的发展潜力.%Chitosan (CS) is a deacetylated derivative of chitin, the second abundant natural biopolymer. Due to its interesting characteristics: bioeompatible, biodegradation and the ability to he molded in various geometries, it has more and more attention as bone tissue engineering scaffold materials gradually. It is more valuable to review the research articles about chitosan used in composite bone tissue engineering scaffold. The functions in composite scaffolds can be found by reviews and it would be applied worthily. Extensive using of Chitosan-based biomaterials in bone tissue engineering will be foreknown by this review

  5. Gold nanoparticles functionalised with fast water exchanging Gd3+ chelates: linker effects on the relaxivity.

    Science.gov (United States)

    Ferreira, Miguel F; Gonçalves, Janaina; Mousavi, Bibimaryam; Prata, Maria I M; Rodrigues, Sérgio P J; Calle, Daniel; López-Larrubia, Pilar; Cerdan, Sebastian; Rodrigues, Tiago B; Ferreira, Paula M; Helm, Lothar; Martins, José A; Geraldes, Carlos F G C

    2015-03-07

    The relaxivity displayed by Gd(3+) chelates immobilized onto gold nanoparticles is the result of the complex interplay between the nanoparticle size, the water exchange rate and the chelate structure. In this work we study the effect of the length of ω-thioalkyl linkers, anchoring fast water exchanging Gd(3+) chelates onto gold nanoparticles, on the relaxivity of the immobilized chelates. Gold nanoparticles functionalized with Gd(3+) chelates of mercaptoundecanoyl and lipoyl amide conjugates of the DO3A-N-(α-amino)propionate chelator were prepared and studied as potential CA for MRI. High relaxivities per chelate, of the order of magnitude 28-38 mM(-1) s(-1) (30 MHz, 25 °C), were attained thanks to simultaneous optimization of the rotational correlation time and of the water exchange rate. Fast local rotational motions of the immobilized chelates around connecting linkers (internal flexibility) still limit the attainable relaxivity. The degree of internal flexibility of the immobilized chelates seems not to be correlated with the length of the connecting linkers. Biodistribution and MRI studies in mice suggest that the in vivo behavior of the gold nanoparticles was determined mainly by size. Small nanoparticles (HD = 3.9 nm) undergo fast renal clearance and avoidance of the RES organs while larger nanoparticles (HD = 4.8 nm) undergo predominantly hepatobiliary excretion. High relaxivities, allied to chelate and nanoparticle stability and fast renal clearance in vivo suggest that functionalized gold nanoparticles hold great potential for further investigation as MRI contrast agents. This study contributes to a better understanding of the effect of linker length on the relaxivity of gold nanoparticles functionalized with Gd(3+) complexes. It is a relevant contribution towards "design rules" for nanostructures functionalized with Gd(3+) chelates as Contrast Agents for MRI and multimodal imaging.

  6. THE USE OF CHELATING AGENTS FOR ACCELERATING EXCRETION OF RADIOELEMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Foreman, Harry; Hamilton, Joseph G.

    1951-06-14

    from internal radiation emitters had been directed to attempts to hasten the elimination of the noxious agent. These have included such methods as low calcium diets, parathormone, viosterol, ammonium chloride, calcium gluconate, and low phosphorus diets. Of these the decalcifying type of treatment was reported to have some measure of effectiveness. The results of the other types of therapy were equivocal. The most successful approach was reported in the work of Schubert. Using zirconium citrate complex, administered 3 hours after the injection of radioyttrium and plutonium into rats, he was able to increase the urinary excretion of the injected radio elements many times over that of the excretion in the untreated rats, in some instance up by a factor of 50 for the first day of excretion. However, when used at later time periods, i.e., in a dog at 150 days, the increase in urinary excretion was only a factor of 2 to 3 over the control period. The fecal excretion of the radio elements was not influenced by the treatment. The present study reports a different approach for accelerating the excretion of radioelements, namely the use of chelating agents. Many of the rare earth and actinide series of elements form water-soluble chelates with various organic compounds. This consideration suggested the possibility that this property of chelating agents might be used 'in vivo' to mobilize radio elements fixed within the body. Of the many compounds considered, ethylenediamine tetracetic acid (EDTA) was chosen for this study. The EDTA was selected because it forms a very stable chelate with many metal ions and hence has a strong tendency to remove such ions from insoluble combinations, i.e., it will dissolve such salts as calcium oxalate, barium sulfate, and lead phosphate in neutral and alkaline solutions. Moreover, it has suitable characteristics for 'in vivo' application. It forms serum soluble chelates which are not readily broken down in the body but are

  7. Uranyl binary and ternary chelates of tenoxicam. Synthesis, spectroscopic and thermal characterization of ternary chelates of tenoxicam and alanine with transition metals

    Science.gov (United States)

    El-Gamel, Nadia E. A.

    2007-11-01

    Ternary Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and UO 2(II) chelates with tenoxicam (Ten) drug (H 2L 1) and dl-alanine (Ala) (HL 2) and also the binary UO 2(II) chelate with Ten were studied. The structures of the chelates were elucidated using elemental, molar conductance, magnetic moment, IR, diffused reflectance and thermal analyses. UO 2(II) binary chelate was isolated in 1:2 ratio with the formula [UO 2(H 2L) 2](NO 3) 2. The ternary chelates were isolated in 1:1:1 (M:H 2L 1:L 2) ratios and have the general formulae [M(H 2L 1)(L 2)(Cl) n(H 2O) m]· yH 2O (M = Fe(III) ( n = 2, m = 0, y = 2), Co(II) ( n = 1, m = 1, y = 2) and Ni(II) ( n = 1, m = 1, y = 3)); [M(H 2L 1)(L 2)](X) z· yH 2O (M = Cu(II) (X = AcO, z = 1, y = 0), Zn(II) (X = AcO, z = 1, y = 3) and UO 2(II) (X = NO 3, z = 1, y = 2)). IR spectra reveal that Ten behaves as a neutral bidentate ligand coordinated to the metal ions via the pyridine-N and carbonyl-O groups, while Ala behaves as a uninegatively bidentate ligand coordinated to the metal ions via the deprotonated carboxylate-O and amino-N. The magnetic and reflectance spectral data confirm that all the chelates have octahedral geometry except Cu(II) and Zn(II) chelates have tetrahedral structures. Thermal decomposition of the chelates was discussed in relation to structure and different thermodynamic parameters of the decomposition stages were evaluated.

  8. A New Subfamily of Sucrose Transporters, SUT4, with Low Affinity/High Capacity Localized in Enucleate Sieve Elements of Plants

    Science.gov (United States)

    Weise, Andreas; Barker, Laurence; Kühn, Christina; Lalonde, Sylvie; Buschmann, Henrik; Frommer, Wolf B.; Ward, John M.

    2000-01-01

    A new subfamily of sucrose transporters from Arabidopsis (AtSUT4), tomato (LeSUT4), and potato (StSUT4) was isolated, demonstrating only 47% similarity to the previously characterized SUT1. SUT4 from two plant species conferred sucrose uptake activity when expressed in yeast. The Km for sucrose uptake by AtSUT4 of 11.6 ± 0.6 mM was ∼10-fold greater than for all other plant sucrose transporters characterized to date. An ortholog from potato had similar kinetic properties. Thus, SUT4 corresponds to the low-affinity/high-capacity saturable component of sucrose uptake found in leaves. In contrast to SUT1, SUT4 is expressed predominantly in minor veins in source leaves, where high-capacity sucrose transport is needed for phloem loading. In potato and tomato, SUT4 was immunolocalized specifically to enucleate sieve elements, indicating that like SUT1, macromolecular trafficking is required to transport the mRNA or the protein from companion cells through plasmodesmata into the sieve elements. PMID:10948254

  9. Reversible conversion-alloying of Sb2O3 as a high-capacity, high-rate, and durable anode for sodium ion batteries.

    Science.gov (United States)

    Hu, Meijuan; Jiang, Yinzhu; Sun, Wenping; Wang, Hongtao; Jin, Chuanhong; Yan, Mi

    2014-11-12

    Sodium ion batteries are attracting ever-increasing attention for the applications in large/grid scale energy storage systems. However, the research on novel Na-storage electrode materials is still in its infancy, and the cycling stability, specific capacity, and rate capability of the reported electrode materials cannot satisfy the demands of practical applications. Herein, a high performance Sb(2)O(3) anode electrochemically reacted via the reversible conversion-alloying mechanism is demonstrated for the first time. The Sb(2)O(3) anode exhibits a high capacity of 550 mAh g(-1) at 0.05 A g(-1) and 265 mAh g(-1) at 5 A g(-1). A reversible capacity of 414 mAh g(-1) at 0.5 A g(-1) is achieved after 200 stable cycles. The synergistic effect involving conversion and alloying reactions promotes stabilizing the structure of the active material and accelerating the kinetics of the reaction. The mechanism may offer a well-balanced approach for sodium storage to create high capacity and cycle-stable anode materials.

  10. A High-Capacity and Long-Cycle-Life Lithium-Ion Battery Anode Architecture: Silver Nanoparticle-Decorated SnO2/NiO Nanotubes.

    Science.gov (United States)

    Kim, Chanhoon; Jung, Ji-Won; Yoon, Ki Ro; Youn, Doo-Young; Park, Soojin; Kim, Il-Doo

    2016-12-27

    The combination of high-capacity and long-term cyclability has always been regarded as the first priority for next generation anode materials in lithium-ion batteries (LIBs). To meet these requirements, the Ag nanoparticle decorated mesoporous SnO2/NiO nanotube (m-SNT) anodes were synthesized via an electrospinning process, followed by fast ramping rate calcination and subsequent chemical reduction in this work. The one-dimensional porous hollow structure effectively alleviates a large volume expansion during cycling as well as provides a short lithium-ion duffusion length. Furthermore, metallic nickel (Ni) nanoparticles converted from the NiO nanograins during the lithiation process reversibly decompose Li2O during delithiation process, which significantly improves the reversible capacity of the m-SNT anodes. In addition, Ag nanoparticles uniformly decorated on the m-SNT via a simple chemical reduction process significantly improve rate capability and also contribute to long-term cyclability. The m-SNT@Ag anodes exhibited excellent cycling stability without obvious capacity fading after 500 cycles with a high capacity of 826 mAh g(-1) at a high current density of 1000 mA g(-1). Furthermore, even at a very high current density of 5000 mA g(-1), the charge-specific capacity remained as high as 721 mAh g(-1), corresponding to 60% of its initial capacity at a current density of 100 mA g(-1).

  11. Electrostatic Self-Assembly of Fe3O4 Nanoparticles on Graphene Oxides for High Capacity Lithium-Ion Battery Anodes

    Directory of Open Access Journals (Sweden)

    Jung Kyoo Lee

    2013-09-01

    Full Text Available Magnetite, Fe3O4, is a promising anode material for lithium ion batteries due to its high theoretical capacity (924 mA h g−1, high density, low cost and low toxicity. However, its application as high capacity anodes is still hampered by poor cycling performance. To stabilize the cycling performance of Fe3O4 nanoparticles, composites comprising Fe3O4 nanoparticles and graphene sheets (GS were fabricated. The Fe3O4/GS composite disks of mm dimensions were prepared by electrostatic self-assembly between negatively charged graphene oxide (GO sheets and positively charged Fe3O4-APTMS [Fe3O4 grafted with (3-aminopropyltrimethoxysilane (APTMS] in an acidic solution (pH = 2 followed by in situ chemical reduction. Thus prepared Fe3O4/GS composite showed an excellent rate capability as well as much enhanced cycling stability compared with Fe3O4 electrode. The superior electrochemical responses of Fe3O4/GS composite disks assure the advantages of: (1 electrostatic self-assembly between high storage-capacity materials with GO; and (2 incorporation of GS in the Fe3O4/GS composite for high capacity lithium-ion battery application.

  12. Finite element analysis of strength for high capacity roller dollies%大载荷滚轮推车强度有限元分析

    Institute of Scientific and Technical Information of China (English)

    郭子逸; 郑卫刚; 龚苏生

    2012-01-01

    In combination with UC 3D modeling software and ADINA software, the finite element models respectively for both the integral dolly and double-roller of high capacity roller dolly are established in the paper. Then based on the nonlinear contact method, the contact stress of the roller contact surface is analyzed. With comparison of the calculation results under the two conditions, it's concluded that the finite element result of double-roller is close to that by the traditional Hertz theory. The static strength calculation for the roller dolly is performed as well, providing theoretical basis for the design of high capacity roller dolly.%将UG三维建模软件和ADINA软件相结合,分别建立了大载荷滚轮推车的整体和双滚轮的有限元模型.基于非线性接触算法对滚轮接触面的接触应力进行分析,对比2种情况下的计算结果,得到双滚子的有限元结果与传统的赫兹理论较接近.同时对滚轮推车的结构静强度进行了计算,为大载荷滚轮推车的设计提供理论依据.

  13. Bio-inspired 2-line ferrihydrite as a high-capacity and high-rate-capability anode material for lithium-ion batteries

    Science.gov (United States)

    Hashimoto, Hideki; Ukita, Masahiro; Sakuma, Ryo; Nakanishi, Makoto; Fujii, Tatsuo; Imanishi, Nobuyuki; Takada, Jun

    2016-10-01

    A high-capacity and high-rate-capability anode material for lithium-ion batteries, silicon-doped iron oxyhydroxide or 2-line ferrihydrite (2Fh), was prepared by mixing iron nitrate powder, tetraethyl orthosilicate, 2-propanol, and ammonium hydrogen carbonate powder at room temperature. The design of this material was inspired by a bacteriogenic product, a nanometric amorphous iron-based oxide material containing small amounts of structural Si. The atomistic structure of the prepared Si-doped 2Fh was strongly affected by the Si molar ratio [x = Si/(Fe + Si)]. Its crystallinity gradually decreased as the Si molar ratio increased, with a structural variation from nanocrystalline to amorphous at x = 0.25. The sample with x = 0.20 demonstrated the best Li storage performance. The developed material exhibited a high capacity of ∼400 mAh g-1 at the 25th cycle in the voltage range of 0.3-3.0 V and at a current rate of 9 A g-1, which was three times greater than that of the Si-free 2Fh. This indicates that Si-doping into the 2Fh structure realizes good rate capability, which are presumably because of the specific nanocomposite structure of iron-based electrochemical centers embedded in the Si-based amorphous matrix, generated by reversible Li insertion/deinsertion process.

  14. Studies on antibacterial activities against S. aureus of chitosan metal chelates prepared in magnetic field.

    Science.gov (United States)

    Wang, Chunbao; Duan, Lihong; Qin, Jian; Wu, Zhengzhi; Guo, Siyuan

    2016-07-04

    In order to study the antibacterial activity of chitosan metal chelates prepared in magnetic effect, the antibacterial activities of these chelates on Staphylococcus aureus were investigated by the agar diffusion paper method. The minimum inhibition concentrations of chitosan-metal chelates were measured. With different degrees of substitution, the inhibition efficiency of the chitosan-metal chelates is different. The inhibition of chitosan on S. aureus increased with the chitosan concentration. Among the chitosan-metal chelates, the inhibition efficiency of CS-Cr is the best. The inhibition efficiency of chitosan-metal chelates prepared in the magnetic field of 400 kA/m on S. aureus is higher than the inhibition efficiency of chitosan-metal chelates prepared without the magnetic field enhanced. The minimum inhibitory concentrations are, respectively, as CS-Cu: 12.5 mg/mL, CS-Pb: 6.25 mg/mL, CS-Cr: 3.125 mg/mL. It is well known from the results that chitosan-metal chelates maybe applied in antibacterial process.

  15. THE SYNTHESIS OF URUSHIOL TITANIUM CHELATE POLYMERS AND THEIR STRUCTURAL CHARACTERISTICS

    Institute of Scientific and Technical Information of China (English)

    HU Binghuan; CHEN Wending; LIN Jinhuo

    1993-01-01

    The synthetic method and structural characteristics of urushiol-titanium chelates (UT) and urushiol-titanium chelate polymer for anticorrosive coatings have been studied.Two kinds of coating films made from UT polymer show excellent physico-mechanical properties and possess good chemical resistance to strong acids and alkalis, many kinds of salt solutions and organic solvents,stable at high temperature.

  16. KINETICS OF THE OXIDATION OF FERROUS CHELATES OF EDTA AND HEDTA IN AQUEOUS-SOLUTION

    NARCIS (Netherlands)

    WUBS, HJ; BEENACKERS, AACM

    1993-01-01

    The kinetics of the reaction of oxygen with ferrous chelates of EDTA and HEDTA was studied in a stirred cell reactor under industrial conditions. The temperature was varied from 20 to 60-degrees-C and the concentration of the ferrous chelate ranged from 0 to 100 mol/m3. The initial pH was 7.5. Under

  17. Brazilian Thalassemia Association protocol for iron chelation therapy in patients under regular transfusion

    Directory of Open Access Journals (Sweden)

    Monica Pinheiro de Almeida Verissimo

    2013-01-01

    Full Text Available In the absence of an iron chelating agent, patients with beta-thalassemia on regular transfusions present complications of transfusion-related iron overload. Without iron chelation therapy, heart disease is the major cause of death; however, hepatic and endocrine complications also occur. Currently there are three iron chelating agents available for continuous use in patients with thalassemia on regular transfusions (desferrioxamine, deferiprone, and deferasirox providing good results in reducing cardiac, hepatic and endocrine toxicity. These practice guidelines, prepared by the Scientific Committee of Associação Brasileira de Thalassemia (ABRASTA, presents a review of the literature regarding iron overload assessment (by imaging and laboratory exams and the role of T2* magnetic resonance imaging (MRI to control iron overload and iron chelation therapy, with evidence-based recommendations for each clinical situation. Based on this review, the authors propose an iron chelation protocol for patients with thalassemia under regular transfusions.

  18. Synthesis and characterization of dihexyldithiocarbamate as a chelating agent in extraction of gold(III)

    Science.gov (United States)

    Fatimah, Soja Siti; Bahti, Husein H.; Hastiawan, Iwan; Permanasari, Anna

    2016-02-01

    The use of dialkyldithiocarbamates as chelating agents of transition metals have been developing for decades. Many chelating agents have been synthesized and used in the extraction of the metals. Studies on particular aspects of extraction of the metals, such as the effect of increasing hydrophobicity of chelating agents on the effectiveness of the extraction, have been done. However, despite the many studies on the synthesis and applications of this type of chelating agents, interests in the aspect of molecular structure of the synthesized ligands and of their complexes, have been limited. This study aimed at synthesizing and characterizing dihexylthiocarbamate, and using the ligand for the extraction of gold III). Characterization of the ligand and of its metal complex were done by using elemental analysis, DTG, and spectroscopic methods to include NMR, (1H, and 13C), FTIR, and MS-ESI. Data on the synthesis, characterization, and the application of the ligand as a chelating agent are presented.

  19. Red Blood Cell Transfusion Independence Following the Initiation of Iron Chelation Therapy in Myelodysplastic Syndrome

    Directory of Open Access Journals (Sweden)

    Maha A. Badawi

    2010-01-01

    Full Text Available Iron chelation therapy is often used to treat iron overload in patients requiring transfusion of red blood cells (RBC. A 76-year-old man with MDS type refractory cytopenia with multilineage dysplasia, intermediate-1 IPSS risk, was referred when he became transfusion dependent. He declined infusional chelation but subsequently accepted oral therapy. Following the initiation of chelation, RBC transfusion requirement ceased and he remained transfusion independent over 40 months later. Over the same time course, ferritin levels decreased but did not normalize. There have been eighteen other MDS patients reported showing improvement in hemoglobin level with iron chelation; nine became transfusion independent, nine had decreased transfusion requirements, and some showed improved trilineage myelopoiesis. The clinical features of these patients are summarized and possible mechanisms for such an effect of iron chelation on cytopenias are discussed.

  20. Synthesis and characterization of dihexyldithiocarbamate as a chelating agent in extraction of gold(III)

    Energy Technology Data Exchange (ETDEWEB)

    Fatimah, Soja Siti, E-mail: soja-sf@upi.edu [Departemen Pendidikan Kimia, Universitas Pendidikan Indonesia, Jl. Dr. Setiabudhi No. 229, Bandung 40154 (Indonesia); Department of Chemistry, Faculty of Mathematics and Natural Sciences, Padjadjaran University, Jl. Raya Bandung-Sumedang, Km. 21, Jatinangor (Indonesia); Bahti, Husein H.; Hastiawan, Iwan [Department of Chemistry, Faculty of Mathematics and Natural Sciences, Padjadjaran University, Jl. Raya Bandung-Sumedang, Km. 21, Jatinangor (Indonesia); Permanasari, Anna [Departemen Pendidikan Kimia, Universitas Pendidikan Indonesia, Jl. Dr. Setiabudhi No. 229, Bandung 40154 (Indonesia)

    2016-02-08

    The use of dialkyldithiocarbamates as chelating agents of transition metals have been developing for decades. Many chelating agents have been synthesized and used in the extraction of the metals. Studies on particular aspects of extraction of the metals, such as the effect of increasing hydrophobicity of chelating agents on the effectiveness of the extraction, have been done. However, despite the many studies on the synthesis and applications of this type of chelating agents, interests in the aspect of molecular structure of the synthesized ligands and of their complexes, have been limited. This study aimed at synthesizing and characterizing dihexylthiocarbamate, and using the ligand for the extraction of gold III). Characterization of the ligand and of its metal complex were done by using elemental analysis, DTG, and spectroscopic methods to include NMR, ({sup 1}H, and {sup 13}C), FTIR, and MS-ESI. Data on the synthesis, characterization, and the application of the ligand as a chelating agent are presented.

  1. Design and synthesis of zinc-selective chelators for extracellular applications.

    Science.gov (United States)

    Kawabata, Eri; Kikuchi, Kazuya; Urano, Yasuteru; Kojima, Hirotatsu; Odani, Akira; Nagano, Tetsuo

    2005-01-26

    Zinc (Zn2+) is found in every cell in human bodies. A few millimolar of free Zn2+ exists in the vesicles of presynaptic neurons in the mammalian brain and is released by synaptic activity or depolarization, modulating the function of certain ion channels and receptors. Although various chemical tools for measuring Zn2+ in biological samples, such as fluorescent probes for Zn2+, have been developed, Zn2+-selective chelators have room to be improved. Research on Zn2+ signals in the brain has traditionally employed several chelators, which have several shortcomings for biological applications. Here we report the design, synthesis, and properties of new membrane-impermeable chelators selective for Zn2+ and describe biological applications in hippocampal slices. As a result, our newly designed chelator revealed the first biological implication that presynaptic Zn2+ can be released in the CA1 region. This confirms the utility of these new chelatotrs as extracellular Zn2+ chelators for biological applications.

  2. Chelation and stabilization of berkelium in oxidation state +IV

    Science.gov (United States)

    Deblonde, Gauthier J.-P.; Sturzbecher-Hoehne, Manuel; Rupert, Peter B.; An, Dahlia D.; Illy, Marie-Claire; Ralston, Corie Y.; Brabec, Jiri; de Jong, Wibe A.; Strong, Roland K.; Abergel, Rebecca J.

    2017-09-01

    Berkelium (Bk) has been predicted to be the only transplutonium element able to exhibit both +III and +IV oxidation states in solution, but evidence of a stable oxidized Bk chelate has so far remained elusive. Here we describe the stabilization of the heaviest 4+ ion of the periodic table, under mild aqueous conditions, using a siderophore derivative. The resulting Bk(IV) complex exhibits luminescence via sensitization through an intramolecular antenna effect. This neutral Bk(IV) coordination compound is not sequestered by the protein siderocalin—a mammalian metal transporter—in contrast to the negatively charged species obtained with neighbouring trivalent actinides americium, curium and californium (Cf). The corresponding Cf(III)-ligand-protein ternary adduct was characterized by X-ray diffraction analysis. Combined with theoretical predictions, these data add significant insight to the field of transplutonium chemistry, and may lead to innovative Bk separation and purification processes.

  3. A NOVEL METAL CHELATE AFFINITY ADSORBENT FOR PROTEIN UPTAKE

    Institute of Scientific and Technical Information of China (English)

    WANGYongjian; BAIShu; 等

    2001-01-01

    In this article,a spherical chitosan gel crosslinked by epichlorohydrin was prepared.It was then loaded with copper ions to produce a metal chelate affinity adsorbent for protein.The uptake of bovine serum albumin(BSA)by the affinity adsorbent was investigated.and the adsorption capacity for BSA as high as 40mg/g-wet beads was observed.The adsorption equilibrium data was well correlated by the Langmuir equation.The adsorption was considerably affected by pH.In additio.The amount of BSA adsorbed onto the beads decreased with the increasing of aqueous phase ionic strength,so adsorbed BAS can be desorbed by adjusting pH orionic strength of the solution.

  4. Beryllium Chelation by Dicarboxylic Acids in Aqueous Solution.

    Science.gov (United States)

    Schmidt, Michael; Bauer, Andreas; Schmidbaur, Hubert

    1997-05-07

    Maleic and phthalic acids are found to react with Be(OH)(2), generated in situ from BeSO(4)(aq) and Ba(OH)(2)(aq), in aqueous solution at pH 3.0 or 4.4, respectively (25 degrees C), to give solutions containing the complexes (H(2)O)(2)Be[(OOCCH)(2)] (1) and (H(2)O)(2)Be[(OOC)(2)C(6)H(4)] (3). The products can be isolated in high yield and identified by microanalytical data. With 2 equiv of the dicarboxylic acids and the pH adjusted to 5.5 and 5.9, respectively, by addition of ammonia, the bis-chelate complexes [(NH(4))(+)](2){[Be[(OOCCH)(2)](2)}(2)(-) (2) and [(NH(4))(+)](2){Be[(OOC)(2)C(6)H(4)](2)}(2)(-) (4) are obtained, which can also be isolated. The compounds show distinct (9)Be, (1)H, and (13)C resonances in their NMR spectra in aqueous solutions. Layering of an aqueous solution of compound 4 with acetone at ambient temperature leads to the precipitation of single crystals suitable for an X-ray structure determination. This salt (5) was found to contain the bis-chelated dianion {Be[(OOC)(2)C(6)H(4)](2)}(2)(-) with the beryllium atom in the spiro center of two seven-membered rings and an overall geometry approaching closely C(2) symmetry. These anions are associated with two crystallographically independent but structurally similar counterions [MeC(O)CH(2)CMe(2)NH(3)](+), which are the product of a condensation reaction of the ammonium cation with the acetone solvent. In the crystal the ammonium hydrogen atoms of the cations form N-H.O hydrogen bonds with the oxo functions of the dianion.

  5. Effects of Zinc Chelators on Aflatoxin Production in Aspergillus parasiticus

    Science.gov (United States)

    Wee, Josephine; Day, Devin M.; Linz, John E.

    2016-01-01

    Zinc concentrations strongly influence aflatoxin accumulation in laboratory media and in food and feed crops. The presence of zinc stimulates aflatoxin production, and the absence of zinc impedes toxin production. Initial studies that suggested a link between zinc and aflatoxin biosynthesis were presented in the 1970s. In the present study, we utilized two zinc chelators, N,N,N′,N′-tetrakis (2-pyridylmethyl) ethane-1,2-diamine (TPEN) and 2,3-dimercapto-1-propanesulfonic acid (DMPS) to explore the effect of zinc limitation on aflatoxin synthesis in Aspergillus parasiticus. TPEN but not DMPS decreased aflatoxin biosynthesis up to six-fold depending on whether A. parasiticus was grown on rich or minimal medium. Although we observed significant inhibition of aflatoxin production by TPEN, no detectable changes were observed in expression levels of the aflatoxin pathway gene ver-1 and the zinc binuclear cluster transcription factor, AflR. Treatment of growing A. parasiticus solid culture with a fluorescent zinc probe demonstrated an increase in intracellular zinc levels assessed by increases in fluorescent intensity of cultures treated with TPEN compared to controls. These data suggest that TPEN binds to cytoplasmic zinc therefore limiting fungal access to zinc. To investigate the efficacy of TPEN on food and feed crops, we found that TPEN effectively decreases aflatoxin accumulation on peanut medium but not in a sunflower seeds-derived medium. From an application perspective, these data provide the basis for biological differences that exist in the efficacy of different zinc chelators in various food and feed crops frequently contaminated by aflatoxin. PMID:27271668

  6. Mechanistic basis for overcoming platinum resistance using copper chelating agents.

    Science.gov (United States)

    Liang, Zheng D; Long, Yan; Tsai, Wen-Bin; Fu, Siqing; Kurzrock, Razelle; Gagea-Iurascu, Mihai; Zhang, Fan; Chen, Helen H W; Hennessy, Bryan T; Mills, Gordon B; Savaraj, Niramol; Kuo, Macus Tien

    2012-11-01

    Platinum-based antitumor agents are widely used in cancer chemotherapy. Drug resistance is a major obstacle to the successful use of these agents because once drug resistance develops, other effective treatment options are limited. Recently, we conducted a clinical trial using a copper-lowering agent to overcome platinum drug resistance in ovarian cancer patients and the preliminary results are encouraging. In supporting this clinical study, using three pairs of cisplatin (cDDP)-resistant cell lines and two ovarian cancer cell lines derived from patients who had failed in platinum-based chemotherapy, we showed that cDDP resistance associated with reduced expression of the high-affinity copper transporter (hCtr1), which is also a cDDP transporter, can be preferentially resensitized by copper-lowering agents because of enhanced hCtr1 expression, as compared with their drug-sensitive counterparts. Such a preferential induction of hCtr1 expression in cDDP-resistant variants by copper chelation can be explained by the mammalian copper homeostasis regulatory mechanism. Enhanced cell-killing efficacy by a copper-lowering agent was also observed in animal xenografts bearing cDDP-resistant cells. Finally, by analyzing a public gene expression dataset, we found that ovarian cancer patients with elevated levels of hCtr1 in their tumors, but not ATP7A and ATP7B, had more favorable outcomes after platinum drug treatment than those expressing low hCtr1 levels. This study reveals the mechanistic basis for using copper chelation to overcome cDDP resistance in clinical investigations.

  7. Clinically approved iron chelators influence zebrafish mortality, hatching morphology and cardiac function.

    Directory of Open Access Journals (Sweden)

    Jasmine L Hamilton

    Full Text Available Iron chelation therapy using iron (III specific chelators such as desferrioxamine (DFO, Desferal, deferasirox (Exjade or ICL-670, and deferiprone (Ferriprox or L1 are the current standard of care for the treatment of iron overload. Although each chelator is capable of promoting some degree of iron excretion, these chelators are also associated with a wide range of well documented toxicities. However, there is currently very limited data available on their effects in developing embryos. In this study, we took advantage of the rapid development and transparency of the zebrafish embryo, Danio rerio to assess and compare the toxicity of iron chelators. All three iron chelators described above were delivered to zebrafish embryos by direct soaking and their effects on mortality, hatching and developmental morphology were monitored for 96 hpf. To determine whether toxicity was specific to embryos, we examined the effects of chelator exposure via intra peritoneal injection on the cardiac function and gene expression in adult zebrafish. Chelators varied significantly in their effects on embryo mortality, hatching and morphology. While none of the embryos or adults exposed to DFO were negatively affected, ICL -treated embryos and adults differed significantly from controls, and L1 exerted toxic effects in embryos alone. ICL-670 significantly increased the mortality of embryos treated with doses of 0.25 mM or higher and also affected embryo morphology, causing curvature of larvae treated with concentrations above 0.5 mM. ICL-670 exposure (10 µL of 0.1 mM injection also significantly increased the heart rate and cardiac output of adult zebrafish. While L1 exposure did not cause toxicity in adults, it did cause morphological defects in embryos at 0.5 mM. This study provides first evidence on iron chelator toxicity in early development and will help to guide our approach on better understanding the mechanism of iron chelator toxicity.

  8. Development and Application of a High Capacity Medical Information Card%大容量医疗信息卡的研究与应用

    Institute of Scientific and Technical Information of China (English)

    刘晓荣; 刘振全; 朱洪平; 陈国良; 张鹭鹭; 刘建; 皇甫明放; 齐亮

    2011-01-01

    Objective To implement collection, analysis, using, transmitting, storage and management of information of mass casualties in diversified military mission, make prompt classification and automatic management of the information, and promote the ability and informationized level of military health service. Methods taking advantage of modernization information technology, a new high capacity medical information card was developed, combined with radio-frequency identification and mobile storage technology. Results The high capacity medical information card could meet the demand of collection, analysis, using, transmitting, storage and management of information of mass casualties in diversified military mission. Conclusion High capacity medical information card can improve the abilitry of classification for mass casualties in diversified military mission in a large extent, and guarantee the continuity of the information transmission, which is important to improve the level of informationization of military health administration. [Chinese Medical Equipment Journal,2011,32(12): 1-2,5]%目的:实现多样化军事行动批量伤员伤情与救治信息的快速采集、处理、利用、传输、存储和管理,实现对批量伤员的快速分类、对伤员信息的自动化管理,提升军队卫勤保障能力及信息化水平.方法:利用现代信息技术,将RFID技术和移动存储技术融为一体,开发研制大容量医疗信息卡.结果:大容量医疗信息卡能够满足多样化军事行动批量伤员伤情与救治信息的快速采集、处理、利用、传输、存储和管理的需求.结论:大容量医疗信息卡可大大提高多样化军事行动批量伤员伤情与救治信息采集、处理、利用、传输、存储和管理速率,实现了伤员信息的智能化管理,保证了信息传输的时效性和连续性,对提升军队卫勤保障能力及信息化水平具有重要作用.

  9. MR imaging of lung ventilation with aerosolized Gadolinium-chelates; MR-Bildgebung der Lungenventilation mittels aerosolierter Gadolinium-Chelate

    Energy Technology Data Exchange (ETDEWEB)

    Haage, P.; Karaagac, S.; Spuentrup, E.; Guenther, R.W. [RWTH Aachen (Germany). Klinik fuer Radiologische Diagnostik; Adam, G. [Universitaetsklinikum Hamburg-Eppendorf (Germany). Abt. fuer Diagnostische und Interventionelle Radiologie

    2003-02-01

    Purpose: To evaluate the feasibility of magnetic resonance assessment of human lung ventilation with aerosolized Gd-chelates in healthy volunteers. Materials and Methods: Five healthy adults (mean age 37 years) were studied with a 1.5 T unit. The volunteers were instructed to inhale the aerosol through an airtight facial mask for 10 minutes. The aerosol was generated with a jet-type small particle nebulizer with attached heater. Ventilation imaging was performed using a respiration-gated dynamic T{sub 1}-weighted turbo spin echo sequence (T{sub R}=199 ms, T{sub E}=8.5 ms, 12 signal averages, slice thickness 10 mm). Pulmonary signal intensity changes were calculated before and after nebulization. Results: The investigation was successfully carried out in all volunteers. An acute or delayed allergic reaction to the aerosolized contrast medium was not observed. In 4 of 5 experiments (80%), a homogeneous signal intensity increase was readily visualized with an average signal increase of 35% after 10 minutes; in one experiment, the aerosol distribution was slightly heterogeneous. (orig.) [German] Ziel: Bestimmung der Durchfuehrbarkeit einer kernspintomographischen Darstellung der Lungenventilation mittels aerosolierter Gd-Chelate bei gesunden Probanden. Methoden: 5 Probanden (Durchschnittsalter 37 Jahre) wurden in einem 1,5T System untersucht. Die Probanden atmeten spontan aerosoliertes Gd-DTPA ueber eine Atemmaske fuer eine Dauer von 10 Minuten. Das Kontrastmittel-Aerosol wurde ueber einen leistungsfaehigen druckluftbetriebenen Vernebler generiert. Die Illustration der Ventilation erfolgte mit einer atemgegateten dynamischen T{sub 1}-gewichteten Turbo-Spin-Echosequenz. Zur Quantitifizerung der Lungenventilation wurden die Signalintensitaeten im Lungengewebe vor und nach Verneblung berechnet. Ergebnisse: Alle Untersuchungen wurden komplikationslos durchgefuehrt und beendet. Eine akute oder verzoegerte Kontrastmittelreaktion wurde nicht beobachtet. In 4 von 5

  10. High capacity and high density functional conductive polymer and SiO anode for high-energy lithium-ion batteries.

    Science.gov (United States)

    Zhao, Hui; Yuca, Neslihan; Zheng, Ziyan; Fu, Yanbao; Battaglia, Vincent S; Abdelbast, Guerfi; Zaghib, Karim; Liu, Gao

    2015-01-14

    High capacity and high density functional conductive polymer binder/SiO electrodes are fabricated and calendered to various porosities. The effect of calendering is investigated in the reduction of thickness and porosity, as well as the increase of density. SiO particle size remains unchanged after calendering. When compressed to an appropriate density, an improved cycling performance and increased energy density are shown compared to the uncalendered electrode and overcalendered electrode. The calendered electrode has a high-density of ∼1.2 g/cm(3). A high loading electrode with an areal capacity of ∼3.5 mAh/cm(2) at a C/10 rate is achieved using functional conductive polymer binder and simple and effective calendering method.

  11. A Biodegradable Polydopamine-Derived Electrode Material for High-Capacity and Long-Life Lithium-Ion and Sodium-Ion Batteries.

    Science.gov (United States)

    Sun, Tao; Li, Zong-Jun; Wang, Heng-Guo; Bao, Di; Meng, Fan-Lu; Zhang, Xin-Bo

    2016-08-26

    Polydopamine (PDA), which is biodegradable and is derived from naturally occurring products, can be employed as an electrode material, wherein controllable partial oxidization plays a key role in balancing the proportion of redox-active carbonyl groups and the structural stability and conductivity. Unexpectedly, the optimized PDA derivative endows lithium-ion batteries (LIBs) or sodium-ion batteries (SIBs) with superior electrochemical performances, including high capacities (1818 mAh g(-1) for LIBs and 500 mAh g(-1) for SIBs) and good stable cyclabilities (93 % capacity retention after 580 cycles for LIBs; 100 % capacity retention after 1024 cycles for SIBs), which are much better than those of their counterparts with conventional binders. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. 羧甲基壳聚糖基水溶性高分子紫外线吸收剂的合成与表征%Synthesis and characterization of carboxymethyl chitosan based water soluble ultraviolet absorbers

    Institute of Scientific and Technical Information of China (English)

    于淑娟; 杨芳; 梁春群; 莫羡忠

    2011-01-01

    以2,4-二羟基二苯甲酮(UV-O)与氯乙酰氯为原料合成了中间体2-羟基-4-氯乙酸酯基二苯甲酮,然后使其与羧甲基壳聚精反应,合成了一系列含有二苯甲酮结构的羧甲基壳聚糖基紫外线吸收剂(CMC-g-HCBP).采用IR,UV,XRD,1HNMR等对产物进行了结构表征.测定结果表明,接枝产物在240~400 nm内均有较强的紫外吸收,并在332 nm处有最大紫外吸收;产物有较好的光稳定性.%An intermediate, 2 - hydroxy - 4 - chloroacetate - benzophenone (HCBP) was synthesized by 2,4- dihydroxy- benzophenone (UV -O) and chloroacetyl chloride as starting materials. Then a series of carboxymethyl chitosan based water soluble ultraviolet absorbers (CMC - g - HCBP) were synthesized by grafting reaction of HCBP on carboxymethyl chitosan in isopropanol with the presence of sodium hydroxide. The structures of the intermediate (HCBP) and grafted products (CMC - g - HCBP) were characterized by IR,UV,XRD and 1HNMR. The results of ultraviolet absorption showed that anyone of the grafted products has a strong ultraviolet absorption capacity ranging from 240 ~400 nm,while the maximum absorption peak presents at 332 nm. The photostability test indicated that the grafted products have good stability.

  13. High capacity carbon dioxide sorbent

    Energy Technology Data Exchange (ETDEWEB)

    Dietz, Steven Dean; Alptekin, Gokhan; Jayaraman, Ambalavanan

    2015-09-01

    The present invention provides a sorbent for the removal of carbon dioxide from gas streams, comprising: a CO.sub.2 capacity of at least 9 weight percent when measured at 22.degree. C. and 1 atmosphere; an H.sub.2O capacity of at most 15 weight percent when measured at 25.degree. C. and 1 atmosphere; and an isosteric heat of adsorption of from 5 to 8.5 kilocalories per mole of CO.sub.2. The invention also provides a carbon sorbent in a powder, a granular or a pellet form for the removal of carbon dioxide from gas streams, comprising: a carbon content of at least 90 weight percent; a nitrogen content of at least 1 weight percent; an oxygen content of at most 3 weight percent; a BET surface area from 50 to 2600 m.sup.2/g; and a DFT micropore volume from 0.04 to 0.8 cc/g.

  14. High capacity immobilized amine sorbents

    Science.gov (United States)

    Gray, McMahan L.; Champagne, Kenneth J.; Soong, Yee; Filburn, Thomas

    2007-10-30

    A method is provided for making low-cost CO.sub.2 sorbents that can be used in large-scale gas-solid processes. The improved method entails treating an amine to increase the number of secondary amine groups and impregnating the amine in a porous solid support. The method increases the CO.sub.2 capture capacity and decreases the cost of utilizing an amine-enriched solid sorbent in CO.sub.2 capture systems.

  15. A pharmacologically validated, high-capacity, functional thallium flux assay for the human Ether-à-go-go related gene potassium channel.

    Science.gov (United States)

    Schmalhofer, William A; Swensen, Andrew M; Thomas, Brande S; Felix, John P; Haedo, Rodolfo J; Solly, Kelli; Kiss, Laszlo; Kaczorowski, Gregory J; Garcia, Maria L

    2010-12-01

    The voltage-gated potassium channel, human Ether-à-go-go related gene (hERG), represents the molecular component of IKr, one of the potassium currents involved in cardiac action potential repolarization. Inhibition of IKr increases the duration of the ventricular action potential, reflected as a prolongation of the QT interval in the electrocardiogram, and increases the risk for potentially fatal ventricular arrhythmias. Because hERG is an appropriate surrogate for IKr, hERG assays that can identify potential safety liabilities of compounds during lead identification and optimization have been implemented. Although the gold standard for hERG evaluation is electrophysiology, this technique, even with the medium capacity, automated instruments that are currently available, does not meet the throughput demands for supporting typical medicinal chemistry efforts in the pharmaceutical environment. Assays that could provide reliable molecular pharmacology data, while operating in high capacity mode, are therefore desirable. In the present study, we describe a high-capacity, 384- and 1,536-well plate, functional thallium flux assay for the hERG channel that fulfills these criteria. This assay was optimized and validated using different structural classes of hERG inhibitors. An excellent correlation was found between the potency of these agents in the thallium flux assay and in electrophysiological recordings of channel activity using the QPatch automated patch platform. Extension of this study to include 991 medicinal chemistry compounds from different internal drug development programs indicated that the thallium flux assay was a good predictor of in vitro hERG activity. These data suggest that the hERG thallium flux assay can play an important role in supporting drug development efforts.

  16. Function of the iron-binding chelator produced by Coriolus versicolor in lignin biodegradation

    Institute of Scientific and Technical Information of China (English)

    WANG Lu; YAN WenChao; CHEN JiaChuan; HUANG Feng; GAO PeiJi

    2008-01-01

    An ultrafiltered low-molecular-weight preparation of chelating compounds was isolated from a wood-containing culture of the white-rot basidiomycete Coriolus versicolor. This preparation could chelate Fe3+ and reduce Fe3+ to Fe2+, demonstrating that the substance may serve as a ferric chelator,oxygen-reducing agent, and redox-cycling molecule, which would include functioning as the electron transport carrier in Fenton reaction. Lignin was treated with the iron-binding chelator and the changes in structure were investigated by 1H-NMR, 13C-NMR, difference spectrum caused by ionization under alkaline conditions and nitrobenzene oxidation. The results indicated that the iron-binding chelator could destroy the β-O-4 bonds in etherified lignin units and insert phenolic hydroxyl groups. The low-molecular-weight chelator secreted by C. versicolor resulted in new phenolic substructures in the lignin polymer, making it susceptible to attack by laccase or manganese peroxidase. Thus, the synergic action of the iron-binding chelator and the lignocellulolytic enzymes made the substrate more accessible to degradation.

  17. Chelating capture and magnetic removal of non-magnetic heavy metal substances from soil

    Science.gov (United States)

    Fan, Liren; Song, Jiqing; Bai, Wenbo; Wang, Shengping; Zeng, Ming; Li, Xiaoming; Zhou, Yang; Li, Haifeng; Lu, Haiwei

    2016-02-01

    A soil remediation method based on magnetic beneficiation is reported. A new magnetic solid chelator powder, FS@IDA (core-shell Fe3O4@SiO2 nanoparticles coated with iminodiacetic acid chelators), was used as a reactive magnetic carrier to selectively capture non-magnetic heavy metals in soil by chelation and removal by magnetic separation. FS@IDA was prepared via inorganic-organic and organic synthesis reactions that generated chelating groups on the surface of magnetic, multi-core, core-shell Fe3O4@SiO2 (FS) nanoparticles. These reactions used a silane coupling agent and sodium chloroacetate. The results show that FS@IDA could chelate the heavy metal component of Cd, Zn, Pb, Cu and Ni carbonates, lead sulfate and lead chloride in water-insoluble salt systems. The resulting FS@IDA-Cd and FS@IDA-Pb chelates could be magnetically separated, resulting in removal rates of approximately 84.9% and 72.2% for Cd and Pb, respectively. FS@IDA could not remove the residual heavy metals and those bound to organic matter in the soil. FS@IDA did not significantly alter the chemical composition of the soil, and it allowed for fast chelating capture, simple magnetic separation and facilitated heavy metal elution. FS@IDA could also be easily prepared and reprocessed.

  18. Recovery Properties of Polysulfone Hollow Fiber Chelating Membrane Modified with Thiourea for Mercury ( Ⅱ )

    Institute of Scientific and Technical Information of China (English)

    WANG Bing; XIAO Feng; HUANG Lei

    2007-01-01

    The adsorption isotherms of the polysulfone hollow fiber chelating membrane modified with thiourea as chelating groups for Hg2+ were determined. The effects of mobile phase conditions and the operating parameters on removal performance of the chelating membrane for Hg2+ were also investigated. The recovery of Hg2+ decreased at low pH and the optimum range of pH was from 6 to 7. The feed concentration effected on recovery of Hg2+ at the specified loading amount of Hg2+. The Hg2+ could be removed from different concentration feed solution by chelating membrane. The increase of feed flow rate led to slight decrease of recovery of Hg2+ at the specified loading amount of Hg2+. The chelating membrane could be operated at height feed flow rate and a large-scale removal of Hg2+ could be realized. With the increase of load amount, Hg2+ recovery decreased, but the saturation degree of chelating membrane increased. According to required recovery of Hg2+ and the saturation degree of chelating membrane, the optimum loading amount of Hg2+ should be selected in the actual removal of Hg2+.

  19. Generation, Fractionation, and Characterization of Iron-Chelating Protein Hydrolysate from Palm Kernel Cake Proteins.

    Science.gov (United States)

    Zarei, Mohammad; Ghanbari, Rahele; Tajabadi, Naser; Abdul-Hamid, Azizah; Bakar, Fatimah Abu; Saari, Nazamid

    2016-02-01

    Palm kernel cake protein was hydrolyzed with different proteases namely papain, bromelain, subtilisin, flavourzyme, trypsin, chymotrypsin, and pepsin to generate different protein hydrolysates. Peptide content and iron-chelating activity of each hydrolysate were evaluated using O-phthaldialdehyde-based spectrophotometric method and ferrozine-based colorimetric assay, respectively. The results revealed a positive correlation between peptide contents and iron-chelating activities of the protein hydrolysates. Protein hydrolysate generated by papain exhibited the highest peptide content of 10.5 mM and highest iron-chelating activity of 64.8% compared with the other hydrolysates. Profiling of the papain-generated hydrolysate by reverse phase high performance liquid chromatography fractionation indicated a direct association between peptide content and iron-chelating activity in most of the fractions. Further fractionation using isoelectric focusing also revealed that protein hydrolysate with basic and neutral isoelectric point (pI) had the highest iron-chelating activity, although a few fractions in the acidic range also exhibited good metal chelating potential. After identification and synthesis of papain-generated peptides, GGIF and YLLLK showed among the highest iron-chelating activities of 56% and 53%, whereas their IC50 were 1.4 and 0.2 μM, respectively.

  20. MRI marrow observations in thalassemia: the effects of the primary disease, transfusional therapy, and chelation

    Energy Technology Data Exchange (ETDEWEB)

    Levin, T.L. [Department of Pediatric Radiology, Columbia-Presbyterian Medical Center, Babies and Children`s Hospital, New York, NY (United States); Sheth, S.S. [Department of Pediatrics, Columbia-Presbyterian Medical Center, Babies and Children`s Hospital, 3959 Broadway, New York, NY 10032 (United States); Ruzal-Shapiro, C. [Department of Pediatric Radiology, Columbia-Presbyterian Medical Center, Babies and Children`s Hospital, New York, NY (United States); Abramson, S. [Department of Radiology, Memorial Sloan-Kettering Cancer Center, 1275 York Avenue, New York, NY 10021 (United States); Piomelli, S. [Department of Pediatrics, Columbia-Presbyterian Medical Center, Babies and Children`s Hospital, 3959 Broadway, New York, NY 10032 (United States); Berdon, W.E. [Department of Pediatric Radiology, Columbia-Presbyterian Medical Center, Babies and Children`s Hospital, New York, NY (United States)

    1995-11-01

    The magnetic resonance bone marrow patterns in thalassemia were evaluated to determine changes produced by transfusion and chelation therapy. Thirteen patients had T1- and T2-weighted images of the spine, pelvis and femurs. Three received no therapy (age range 2.5-3 years). Three were ``hypertransfused`` (transfused to maintain a hemoglobin greater than 10 g/dl) and not chelated because of age (age range 6 months-8 years). Seven were ``hypertransfused`` and chelated (age range 12-35 years). Signal characteristics of marrow were compared with those of surrounding muscle and fat. Fatty marrow (isointense with subcutaneous fat) was compared with red marrow (hypointense to fat and slightly hyperintense to muscle). Marrow hypointense to muscle was identified as iron deposition within red marrow. The untreated group demonstrated signal consistent with red marrow throughout the central and peripheral skeleton. Hypertransfused but not chelated patients demonstrated marked iron deposition in the central and peripheral skeleton. Hypertransfused and chelated patients demonstrated iron deposition in the central skeleton and a mixed appearance of marrow in the peripheral skeleton. The MR appearance of marrow in thalassemia is a reflection of the patient`s transfusion and chelation therapy. Iron deposition occurs despite chelation therapy in sites of active red marrow. As red marrow retreats centrally with age, so does the pattern of iron deposition. The long-term biological effects of this iron deposition are unknown. (orig.). With 8 figs., 1 tab.

  1. Iron chelators can protect against oxidative stress through ferryl heme reduction.

    Science.gov (United States)

    Reeder, Brandon J; Hider, Robert C; Wilson, Michael T

    2008-02-01

    Iron chelators such as desferrioxamine have been shown to ameliorate oxidative damage in vivo. The mechanism of this therapeutic action under non-iron-overload conditions is, however, complex, as desferrioxamine has properties that can impact on oxidative damage independent of its capacity to act as an iron chelator. Desferrioxamine can act as a reducing agent to remove cytotoxic ferryl myoglobin and hemoglobin and has recently been shown to prevent the formation of a highly cytotoxic heme-to-protein cross-linked derivative of myoglobin. In this study we have examined the effects of a wide range of iron chelators, including the clinically used hydroxypyridinone CP20 (deferriprone), on the stability of ferryl myoglobin and on the formation of heme-to-protein cross-linking. We show that all hydroxypyridinones, as well as many other iron chelators, are efficient reducing agents of ferryl myoglobin. These compounds are also effective at preventing the formation of cytotoxic derivatives of myoglobin such as heme-to-protein cross-linking. These results show that the use of iron chelators in vivo may ameliorate oxidative damage under conditions of non-iron overload by at least two mechanisms. The antioxidant effects of chelators in vivo cannot, therefore, be attributed solely to iron chelation.

  2. Function of the iron-binding chelator produced by Coriolus versicolor in lignin biodegradation.

    Science.gov (United States)

    Wang, Lu; Yan, WenChao; Chen, JiaChuan; Huang, Feng; Gao, PeiJi

    2008-03-01

    An ultrafiltered low-molecular-weight preparation of chelating compounds was isolated from a wood-containing culture of the white-rot basidiomycete Coriolus versicolor. This preparation could chelate Fe3+ and reduce Fe3+ to Fe2+, demonstrating that the substance may serve as a ferric chelator, oxygen-reducing agent, and redox-cycling molecule, which would include functioning as the electron transport carrier in Fenton reaction. Lignin was treated with the iron-binding chelator and the changes in structure were investigated by 1H-NMR, 13C-NMR, difference spectrum caused by ionization under alkaline conditions and nitrobenzene oxidation. The results indicated that the iron-binding chelator could destroy the beta-O-4 bonds in etherified lignin units and insert phenolic hydroxyl groups. The low-molecular-weight chelator secreted by C. versicolor resulted in new phenolic substructures in the lignin polymer, making it susceptible to attack by laccase or manganese peroxidase. Thus, the synergic action of the iron-binding chelator and the lignocellulolytic enzymes made the substrate more accessible to degradation.

  3. The effect of ferrous-chelating hairtail peptides on iron deficiency and intestinal flora in rats.

    Science.gov (United States)

    Lin, Hui-Min; Deng, Shang-Gui; Huang, Sai-Bo; Li, Ying-Jie; Song, Ru

    2016-06-01

    Chelating agents, such as small peptides, can decrease free iron content and increase iron bioavailability. They may have promising therapeutic potential and may prevent the pro-oxidant effects of low molecular weight iron. Hairtail is a species of fish that is rich in easily digestible proteins. We extended this strategy for iron delivery by using an enzymatic hydrolysate of hairtail as the chelating agent and found that the ferrous-chelating hairtail peptides have anti-anaemic activity in Sprague-Dawley rats with anaemia. The anti-anaemic activity of ferrous-chelating hairtail peptides prepared by enzymatic hydrolysis of the hairtail and ferrous chelation was studied in rat models of iron deficiency anaemia. After the end of the 35 d experiment, we noted significant differences in haemoglobin, mean corpuscular volume, haemoglobin distribution width, and ferritin concentrations between those animals supplemented with ferrous-chelating hairtail peptides and FeSO4 and healthy animals. There were no negative side effects on the animals' growth or behaviour. There was no obvious inflammation in the intestinal mucosa lamina propria and no unbalance of intestinal flora. The novel ferrous-chelating hairtail peptides may be a suitable fortificant for improving iron-deficiency status. Our findings demonstrated that this multi-tracer technique has many applications in nutritional research. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

  4. Function of the iron-binding chelator produced by Coriolus versicolor in lignin biodegradation

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    An ultrafiltered low-molecular-weight preparation of chelating compounds was isolated from a wood-containing culture of the white-rot basidiomycete Coriolus versicolor. This preparation could chelate Fe3+ and reduce Fe3+ to Fe2+, demonstrating that the substance may serve as a ferric chelator, oxygen-reducing agent, and redox-cycling molecule, which would include functioning as the electron transport carrier in Fenton reaction. Lignin was treated with the iron-binding chelator and the changes in structure were investigated by 1H-NMR, 13C-NMR, difference spectrum caused by ionization under alkaline conditions and nitrobenzene oxidation. The results indicated that the iron-binding chelator could destroy the β-O-4 bonds in etherified lignin units and insert phenolic hydroxyl groups. The low-molecular-weight chelator secreted by C. versicolor resulted in new phenolic substructures in the lignin polymer, making it susceptible to attack by laccase or manganese peroxidase. Thus, the synergic action of the iron-binding chelator and the lignocellulolytic enzymes made the substrate more acces- sible to degradation.

  5. Study of Anti-Fatigue Effect in Rats of Ferrous Chelates Including Hairtail Protein Hydrolysates

    Directory of Open Access Journals (Sweden)

    Saibo Huang

    2015-12-01

    Full Text Available The ability of ferrous chelates including hairtail protein hydrolysates to prevent and reduce fatigue was studied in rats. After hydrolysis of hairtail surimi with papain, the hairtail protein hydrolysates (HPH were separated into three groups by range of relative molecular weight using ultrafiltration membrane separation. Hairtail proteins were then chelated with ferrous ions, and the antioxidant activity, the amino acid composition and chelation rate of the three kinds of ferrous chelates including hairtail protein hydrolysates (Fe-HPH were determined. Among the three groups, the Fe-HPH chelate showing the best conditions was selected for the anti-fatigue animal experiment. For it, experimental rats were randomly divided into seven groups. Group A was designated as the negative control group given distilled water. Group B, the positive control group, was given glutathione. Groups C, D and E were designated as the Fe-HPH chelate treatment groups and given low, medium, and high doses, respectively. Group F was designated as HPH hydrolysate treatment group, and Group G was designated as FeCl2 treatment group. The different diets were orally administered to rats for 20 days. After that time, rats were subjected to forced swimming training after 1 h of gavage. Rats given Fe-FPH chelate had higher haemoglobin regeneration efficiency (HRE, longer exhaustive swimming time and higher SOD activity. Additionally, Fe-FPH chelate was found to significantly decrease the malondialdehyde content, visibly enhance the GSH-Px activity in liver and reduce blood lactic acid of rats. Fe-HPH chelate revealed an anti-fatigue effect, similar to or better than the positive control substance and superior to HPH or Fe when provided alone.

  6. Study of Anti-Fatigue Effect in Rats of Ferrous Chelates Including Hairtail Protein Hydrolysates

    Science.gov (United States)

    Huang, Saibo; Lin, Huimin; Deng, Shang-gui

    2015-01-01

    The ability of ferrous chelates including hairtail protein hydrolysates to prevent and reduce fatigue was studied in rats. After hydrolysis of hairtail surimi with papain, the hairtail protein hydrolysates (HPH) were separated into three groups by range of relative molecular weight using ultrafiltration membrane separation. Hairtail proteins were then chelated with ferrous ions, and the antioxidant activity, the amino acid composition and chelation rate of the three kinds of ferrous chelates including hairtail protein hydrolysates (Fe-HPH) were determined. Among the three groups, the Fe-HPH chelate showing the best conditions was selected for the anti-fatigue animal experiment. For it, experimental rats were randomly divided into seven groups. Group A was designated as the negative control group given distilled water. Group B, the positive control group, was given glutathione. Groups C, D and E were designated as the Fe-HPH chelate treatment groups and given low, medium, and high doses, respectively. Group F was designated as HPH hydrolysate treatment group, and Group G was designated as FeCl2 treatment group. The different diets were orally administered to rats for 20 days. After that time, rats were subjected to forced swimming training after 1 h of gavage. Rats given Fe-FPH chelate had higher haemoglobin regeneration efficiency (HRE), longer exhaustive swimming time and higher SOD activity. Additionally, Fe-FPH chelate was found to significantly decrease the malondialdehyde content, visibly enhance the GSH-Px activity in liver and reduce blood lactic acid of rats. Fe-HPH chelate revealed an anti-fatigue effect, similar to or better than the positive control substance and superior to HPH or Fe when provided alone. PMID:26633476

  7. Isomerism in benzyl-DOTA derived bifunctional chelators: implications for molecular imaging.

    Science.gov (United States)

    Payne, Katherine M; Woods, Mark

    2015-02-18

    The bifunctional chelator IB-DOTA has found use in a range of biomedical applications given its ability to chelate many metal ions, but in particular the lanthanide(III) ions. Gd(3+) in particular is of interest in the development of new molecular imaging agents for MRI and is highly suitable for chelation by IB-DOTA. Given the long-term instability of the aryl isothiocyanate functional group we have used the more stable nitro derivative (NB-DOTA) to conduct a follow-up study of some of our previous work on the coordination chemistry of chelates of these BFCs. Using a combination of NMR and HPLC to study the Eu(3+) and Yb(3+) chelates of NB-DOTA, we have demonstrated that this ligand will produce two discrete regioisomeric chelates at the point at which the metal ion is introduced into the BFC. These regioisomers are defined by the position of the benzylic substituent on the macrocyclic ring: adopting an equatorial position either at the corner or the side of the [3333] ring conformation. These regioisomers are incapable of interconversion and are distinct, separate structures with different SAP/TSAP ratios. The side isomer exhibits an increased population of the TSAP isomer, pointing to more rapid water exchange kinetics in this regioisomer. This has potential ramifications for the use of these two regioisomers of Gd(3+)-BFC chelates in MRI applications. We have also found that, remarkably, there is little or no freedom of rotation about the first single bond extending from the macrocyclic ring to the benzylic substituent. Since this is the linkage through which the chelate is conjugated to the remainder of the molecular imaging probe, this result implies that there may be reduced local rotation of the Gd(3+) chelate within a molecular imaging probe. This implies that this type of BFC could exhibit higher relaxivities than other types of BFC.

  8. Study of Anti-Fatigue Effect in Rats of Ferrous Chelates Including Hairtail Protein Hydrolysates.

    Science.gov (United States)

    Huang, Saibo; Lin, Huimin; Deng, Shang-Gui

    2015-12-01

    The ability of ferrous chelates including hairtail protein hydrolysates to prevent and reduce fatigue was studied in rats. After hydrolysis of hairtail surimi with papain, the hairtail protein hydrolysates (HPH) were separated into three groups by range of relative molecular weight using ultrafiltration membrane separation. Hairtail proteins were then chelated with ferrous ions, and the antioxidant activity, the amino acid composition and chelation rate of the three kinds of ferrous chelates including hairtail protein hydrolysates (Fe-HPH) were determined. Among the three groups, the Fe-HPH chelate showing the best conditions was selected for the anti-fatigue animal experiment. For it, experimental rats were randomly divided into seven groups. Group A was designated as the negative control group given distilled water. Group B, the positive control group, was given glutathione. Groups C, D and E were designated as the Fe-HPH chelate treatment groups and given low, medium, and high doses, respectively. Group F was designated as HPH hydrolysate treatment group, and Group G was designated as FeCl₂ treatment group. The different diets were orally administered to rats for 20 days. After that time, rats were subjected to forced swimming training after 1 h of gavage. Rats given Fe-FPH chelate had higher haemoglobin regeneration efficiency (HRE), longer exhaustive swimming time and higher SOD activity. Additionally, Fe-FPH chelate was found to significantly decrease the malondialdehyde content, visibly enhance the GSH-Px activity in liver and reduce blood lactic acid of rats. Fe-HPH chelate revealed an anti-fatigue effect, similar to or better than the positive control substance and superior to HPH or Fe when provided alone.

  9. A preliminary study on the interaction of ferritin single crystals with chelating agents

    Science.gov (United States)

    Domininguez-Vera, Jose M.; Rondón, Deyanira; Moreno, Abel; García-Ruiz, Juan Ma.

    1996-10-01

    The crystallization of ferritin and the subsequent in situ study of the process of iron removal from the crystals by using chelating agents is reported. The chelating agents, oxalate and acetohydroxamate, were chosen because of their high iron(III) affinity. The formation of the corresponding soluble iron(III) complexes arising from the reaction with the iron cores was detected by UV-visible spectroscopy. Furthermore, we show that for a given concentration range of the chelating agents, the iron removal process takes place without crystal destruction. This ferritin-apoferritin (or iron-depleted ferritin) conversion was followed by video-microscopy and checked by X-ray diffraction.

  10. Chelate effects in sulfate binding by amide/urea-based ligands.

    Science.gov (United States)

    Jia, Chuandong; Wang, Qi-Qiang; Begum, Rowshan Ara; Day, Victor W; Bowman-James, Kristin

    2015-07-01

    The influence of chelate and mini-chelate effects on sulfate binding was explored for six amide-, amide/amine-, urea-, and urea/amine-based ligands. Two of the urea-based hosts were selective for SO4(2-) in water-mixed DMSO-d6 systems. Results indicated that the mini-chelate effect provided by a single urea group with two NH binding sites appears to provide enhanced binding over two amide groups. Furthermore, additional urea binding sites incorporated into the host framework appeared to overcome to some extent competing hydration effects with increasing water content.

  11. The Effect of Chelating Copolymer Additive on the Yttrium Iron Garnet Nanoparticle Formation

    Institute of Scientific and Technical Information of China (English)

    Wang; Cheng-chien

    2007-01-01

    1 Results Yttrium iron garnet (YIG) is a well-known ferromagnetic garnet material and has widely used in electronic devices[1].A new acrylic chelating polymer was developed to act as the additive of the preparation of YIG precursor in our previous study[2].The sintering temperature of YIG nanocrystal obtained by this YIG precursor (ACP) was magnificently descended from 1 000 to 600 ℃.In this study,we were further to study the effect of amount of chelating polymer and the compositions of chelating polyme...

  12. AAZTA: an ideal chelating agent for the development of {sup 44}Sc PET imaging agents

    Energy Technology Data Exchange (ETDEWEB)

    Nagy, Gabor; Szikra, Dezso; Trencsenyi, Gyoergy [Scanomed Ltd., Debrecen (Hungary); University of Debrecen, Medical Imaging Clinic (Hungary); Fekete, Aniko [University of Debrecen, Medical Imaging Clinic (Hungary); Garai, Ildiko [Scanomed Ltd., Debrecen (Hungary); Giani, Arianna M.; Negri, Roberto [Dipartimento di Scienze del Farmaco, Universita del Piemonte Orientale, Novara (Italy); Masciocchi, Norberto [Dipartimento di Scienza e Alta Tecnologia e To.Sca.Lab, Universita degli Studi dell' Insubria, Como (Italy); Maiocchi, Alessandro; Uggeri, Fulvio [Bracco Imaging spa, Bracco Research Centre, Colleretto Giacosa (Italy); Toth, Imre [Department of Inorganic and Analytical Chemistry, University of Debrecen (Hungary); Aime, Silvio [Dipartimento di Biotecnologie Molecolari e Scienze della Salute, Centro di Imaging Molecolare e Preclinico, Universita degli Studi di Torino (Italy); Giovenzana, Giovanni B. [Dipartimento di Scienze del Farmaco, Universita del Piemonte Orientale, Novara (Italy); CAGE Chemicals srl, Novara (Italy); Baranyai, Zsolt [Bracco Imaging spa, Bracco Research Centre, Colleretto Giacosa (Italy); Department of Inorganic and Analytical Chemistry, University of Debrecen (Hungary)

    2017-02-13

    Unprecedented fast and efficient complexation of Sc{sup III} was demonstrated with the chelating agent AAZTA (AAZTA=1,4-bis(carboxymethyl)-6-[bis(carboxymethyl)] amino-6-methylperhydro-1,4-d iazepine) under mild experimental conditions. The robustness of the {sup 44}Sc(AAZTA){sup -} chelate and conjugated biomolecules thereof is further shown by in vivo PET imaging in healthy and tumor mice models. The new results pave the way towards development of efficient Sc-based radiopharmaceuticals using the AAZTA chelator. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

  13. (Bifunctional chelates of Rh-105, Au-199, and other metallic radionuclides as potential radiotherapeutic agents)

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    Progress during this period is reported under the following headings: Diethylenetriamine based and related bifunctional chelating agents and their complexation with Rh-105, Au-198, Pd-109, cu-67, In-111, and Co-57; studies of Pd-109, Rh-105 and Tc-99m with bifunctional chelates based on phenylenediamine; establishment of an appropriate protein assay method for conjugated proteins; studies of new bifunctional Bi, Tri and tetradentate amine oxime ligands with Rh-105; IgG and antibody B72.3 conjugation studies by HPLC Techniques with bifunctional metal chelates; and progress on ligand systems for Au(III).

  14. [Bifunctional chelates of Rh-105, Au-199, and other metallic radionuclides as potential radiotherapeutic agents

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-31

    Progress during this period is reported under the following headings: Diethylenetriamine based and related bifunctional chelating agents and their complexation with Rh-105, Au-198, Pd-109, cu-67, In-111, and Co-57; studies of Pd-109, Rh-105 and Tc-99m with bifunctional chelates based on phenylenediamine; establishment of an appropriate protein assay method for conjugated proteins; studies of new bifunctional Bi, Tri and tetradentate amine oxime ligands with Rh-105; IgG and antibody B72.3 conjugation studies by HPLC Techniques with bifunctional metal chelates; and progress on ligand systems for Au(III).

  15. Chelating and antibacterial properties of chitosan nanoparticles on dentin

    Science.gov (United States)

    Bramante, Clovis Monteiro; Duarte, Marco Antonio Hungaro; de Moura, Marcia Regina; Aouada, Fauze Ahmad; Kishen, Anil

    2015-01-01

    Objectives The use of chitosan nanoparticles (CNPs) in endodontics is of interest due to their antibiofilm properties. This study was to investigate the ability of bioactive CNPs to remove the smear layer and inhibit bacterial recolonization on dentin. Materials and Methods One hundred bovine dentin sections were divided into five groups (n = 20 per group) according to the treatment. The irrigating solutions used were 2.5% sodium hypochlorite (NaOCl) for 20 min, 17% ethylenediaminetetraacetic acid (EDTA) for 3 min and 1.29 mg/mL CNPs for 3 min. The samples were irrigated with either distilled water (control), NaOCl, NaOCl-EDTA, NaOCl-EDTA-CNPs or NaOCl-CNPs. After the treatment, half of the samples (n = 50) were used to assess the chelating effect of the solutions using portable scanning electronic microscopy, while the other half (n = 50) were infected intra-orally to examine the post-treatment bacterial biofilm forming capacity. The biovolume and cellular viability of the biofilms were analysed under confocal laser scanning microscopy. The Kappa test was performed for examiner calibration, and the non-parametric Kruskal-Wallis and Dunn tests (p irrigant during root canal treatment with the dual benefit of removing the smear layer and inhibiting bacterial recolonization on root dentin. PMID:26295022

  16. mer and fac isomerism in tris chelate diimine metal complexes.

    Science.gov (United States)

    Dabb, Serin L; Fletcher, Nicholas C

    2015-03-14

    In this perspective, we highlight the issue of meridional (mer) and facial (fac) orientation of asymmetrical diimines in tris-chelate transition metal complexes. Diimine ligands have long been the workhorse of coordination chemistry, and whilst there are now good strategies to isolate materials where the inherent metal centered chirality is under almost complete control, and systematic methodologies to isolate heteroleptic complexes, the conceptually simple geometrical isomerism has not been widely investigated. In systems where the two donor atoms are significantly different in terms of the σ-donor and π-accepting ability, the fac isomer is likely to be the thermodynamic product. For the diimine complexes with two trigonal planar nitrogen atoms there is much more subtlety to the system, and external factors such as the solvent, lattice packing and the various steric considerations play a delicate role in determining the observed and isolable product. In this article we discuss the possibilities to control the isomeric ratio in labile systems, consider the opportunities to separate inert complexes and discuss the observed differences in their spectroscopic properties. Finally we report on the ligand orientation in supramolecular systems where facial coordination leads to simple regular structures such as helicates and tetrahedra, but the ability of the ligand system to adopt a mer orientation enables self-assembled structures of considerable beauty and complexity.

  17. New method to estimate stability of chelate complexes

    CERN Document Server

    Grigoriev, F V; Romanov, A N; Kondakova, O A; Sulimov, V B

    2009-01-01

    A new method allowing calculation of the stability of chelate complexes with Mg2+ ion in water have been developed. The method is based on two-stage scheme for the complex formation. The first stage is the ligand transfer from an arbitrary point of the solution to the second solvation shell of the Mg2+ ion. At this stage the ligand is considered as a charged or neutral rigid body. The second stage takes into account disruption of coordinate bonds between Mg2+ and water molecules from the first solvation shell and formation of the bonds between the ligand and the Mg2+ ion. This effect is considered using the quantum chemical modeling. It has been revealed that the main contribution to the free energy of the complex formation is caused by the disruption/formation of the coordinate bonds between Mg2+, water molecules and the ligand. Another important contribution to the complex formation energy is change of electrostatic interactions in water solvent upon the ligand binding with Mg2+ ion. For all complexes under...

  18. The Incidence of Ototoxicity in Patients Using Iron Chelators.

    Science.gov (United States)

    Derin, Serhan; Azık, Fatih Mehmet; Topal, Yaşar; Topal, Hatice; Karakuş, Volkan; Çetinkaya, Petek Uzay; Şahan, Murat; Azık, Tansel Erdem; Kocabaş, Can Naci

    2017-04-01

    In this study, we aimed to detect the incidences of ototoxicity in patients with hemoglobinopathies taking deferoxamine (DFO), deferiprone, and deferasirox using the National Cancer Institute (NCI) Common Terminology Criteria for Adverse Events (CTCAE) scale to obtain more objective data. Fifty-five transfusion-dependent patients were evaluated in this study. The NCI CTCAE scale was used to assess ototoxicity levels. The average ferritin and hemoglobin levels, the type of iron chelator, and the duration of therapy of all the patients were recorded. Ototoxicity was observed in 15 patients (31.9 %), all of whom were taking DFO. The median age was 19.5 (6-43) in patients without ototoxicity and 29 (16-50) in those with ototoxicity; this difference was statistically significant (pototoxicity and 986.7 ng/mL and 9.24 mg/dL, respectively, in those without ototoxicity; these differences were not significant (p>0.05). Ototoxicity was not observed in the eight patients who used only deferasirox and deferiprone. The ototoxicity incidence with DFO at doses below 50 mg/kg/day was 27.3%. Deferiprone and deferasirox were not associated with ototoxic effects in patients taking these drugs.

  19. Curcumin inhibits growth of Saccharomyces cerevisiae through iron chelation.

    Science.gov (United States)

    Minear, Steven; O'Donnell, Allyson F; Ballew, Anna; Giaever, Guri; Nislow, Corey; Stearns, Tim; Cyert, Martha S

    2011-11-01

    Curcumin, a polyphenol derived from turmeric, is an ancient therapeutic used in India for centuries to treat a wide array of ailments. Interest in curcumin has increased recently, with ongoing clinical trials exploring curcumin as an anticancer therapy and as a protectant against neurodegenerative diseases. In vitro, curcumin chelates metal ions. However, although diverse physiological effects have been documented for this compound, curcumin's mechanism of action on mammalian cells remains unclear. This study uses yeast as a model eukaryotic system to dissect the biological activity of curcumin. We found that yeast mutants lacking genes required for iron and copper homeostasis are hypersensitive to curcumin and that iron supplementation rescues this sensitivity. Curcumin penetrates yeast cells, concentrates in the endoplasmic reticulum (ER) membranes, and reduces the intracellular iron pool. Curcumin-treated, iron-starved cultures are enriched in unbudded cells, suggesting that the G(1) phase of the cell cycle is lengthened. A delay in cell cycle progression could, in part, explain the antitumorigenic properties associated with curcumin. We also demonstrate that curcumin causes a growth lag in cultured human cells that is remediated by the addition of exogenous iron. These findings suggest that curcumin-induced iron starvation is conserved from yeast to humans and underlies curcumin's medicinal properties.

  20. A membrane-specific tyrosinase chelate: the mitotic regulator?

    Science.gov (United States)

    Kharasch, J A

    1987-06-01

    Cancer's random, reversible, unstable transitions to "normal" structures imply their functional relation. Similar random, continuous, reversible oncogene "mutational transformation" also lacks a consistent hybrid. Positing cancer's "mutationally altered genotype" leads to medically foreign causes, qualities, inducers, suppressors, immune proteins, and viruses. Its random variation, however, opposes the functionally discrete, ordered, stable, irreversible hybrid variation and single-valued transforms of molecular genetics. There, "causal mutational operators" remain unspecified; only consistent single-valued DNA base and amino acid change, as "transform operand", are made explicit. A mitotically "blocked" (normal) and "unblocked" (malignant) stem cell "phenotype", operationally constructed from microscopic data, is therefore viewed within the homeostatic context of open-system enzyme-regulatory equilibrium. This functional, stochastic field distribution between "structurally bound" and "freely dividing" stem cell number discloses their putative regulatory mitotic-blocking factor. A tyrosinase complex, interacting by Cu2+-Fe2+ chelation with a proline hydroxylase divisional enzyme near stem cell ribosomes, maintains steady-state mitotic equilibrium. Based upon familiar medical, biochemical, and energy principles this confronts cancer's pigmentary-depigmentary signs, glycolytic metabolism, elevated serum tyrosinase, defective collagen production, exposed membrane binding sites, and tyrosine's recent growth control role.

  1. Iron chelation therapy in transfusion-dependent thalassemia patients: current strategies and future directions

    Directory of Open Access Journals (Sweden)

    Saliba AN

    2015-06-01

    Full Text Available Antoine N Saliba, Afif R Harb, Ali T Taher Department of Internal Medicine, Division of Hematology/Oncology, American University of Beirut, Beirut, Lebanon Abstract: Transfusional iron overload is a major target in the care of patients with transfusion-dependent thalassemia (TDT and other refractory anemias. Iron accumulates in the liver, heart, and endocrine organs leading to a wide array of complications. In this review, we summarize the characteristics of the approved iron chelators, deferoxamine, deferiprone, and deferasirox, and the evidence behind the use of each, as monotherapy or as part of combination therapy. We also review the different guidelines on iron chelation in TDT. This review also discusses future prospects and directions in the treatment of transfusional iron overload in TDT whether through innovation in chelation or other therapies, such as novel agents that improve transfusion dependence. Keywords: thalassemia, transfusion-dependent thalassemia, iron overload, iron chelation therapy, transfusion

  2. Effect of calcium chelators on physical changes in casein micelles in concentrated micellar casein solutions

    NARCIS (Netherlands)

    Kort, de E.J.P.; Minor, M.; Snoeren, T.H.M.; Hooijdonk, van A.C.M.; Linden, van der E.

    2011-01-01

    The effect of calcium chelators on physical changes of casein micelles in concentrated micellar casein solutions was investigated by measuring calcium-ion activity, viscosity and turbidity, and performing ultracentrifugation. The highest viscosities were measured on addition of sodium

  3. Highly Diastereoselective Chelation-controlled Additions to α-Silyloxy Ketones

    Science.gov (United States)

    Stanton, Gretchen R.; Koz, Gamze

    2011-01-01

    The polar Felkin-Anh, Cornforth, and Cram-chelation models predict that the addition of organometallic reagents to silyl–protected α–hydroxy ketones proceeds via a non-chelation pathway to give anti-diol addition products. This prediction has held true for the vast majority of additions reported in the literature and few methods for chelation-controlled additions of organometallic reagents to silyl–protected α–hydroxy ketones have been introduced. Herein, we present a general and highly diastereoselective method for the addition of dialkylzincs and (E)-di-, (E)-tri- and (Z)-disubstituted vinylzinc reagents to α-silyloxy ketones using alkyl zinc halide Lewis acids, RZnX, to give chelation-controlled products (dr ≥18:1). The compatibility of organozinc reagents with other functional groups makes this method potentially very useful in complex molecule synthesis. PMID:21534530

  4. Absorption of nitric oxide into aqueous solutions of ferrous chelates accompanied by instantaneous reaction

    NARCIS (Netherlands)

    Demmink, J.F; vanGils, I.C.F.; Beenackers, A.A C M

    1997-01-01

    The absorption of nitric oxide (NO) into aqueous solutions of ferrous chelates of nitrilotriacetic acid (NTA), ethylene diaminetetraacetic acid (EDTA), hydroxyethylenediaminetriacetic acid (HEDTA), and diethylenetriaminepentaacetic acid (DTPA) was studied in a stirred cell reactor. Experimental cond

  5. CATALYTIC HYDROGENATION OF ACRYLATE ASMMETRIC Dd(Ⅱ)—CHELATING RESINS CONTAINING AMINO ACID LIGANDS

    Institute of Scientific and Technical Information of China (English)

    Wangying; WangHongzuo; 等

    1995-01-01

    The catalytic hydrogenation of palladium chelating resins containing chiral amino acid ligands based on lower crosslinked poly(chloroethyl acrylate) and some effects on the rate of hydrogenation were studied.

  6. Bifunctional chelating agent for the design and development of site specific radiopharmaceuticals and biomolecule conjugation strategy

    Science.gov (United States)

    Katti, Kattesh V.; Prabhu, Kandikere R.; Gali, Hariprasad; Pillarsetty, Nagavara Kishore; Volkert, Wynn A.

    2003-10-21

    There is provided a method of labeling a biomolecule with a transition metal or radiometal in a site specific manner to produce a diagnostic or therapeutic pharmaceutical compound by synthesizing a P.sub.2 N.sub.2 -bifunctional chelating agent intermediate, complexing the intermediate with a radio metal or a transition metal, and covalently linking the resulting metal-complexed bifunctional chelating agent with a biomolecule in a site specific manner. Also provided is a method of synthesizing the --PR.sub.2 containing biomolecules by synthesizing a P.sub.2 N.sub.2 -bifunctional chelating agent intermediate, complexing the intermediate with a radiometal or a transition metal, and covalently linking the resulting radio metal-complexed bifunctional chelating agent with a biomolecule in a site specific manner. There is provided a therapeutic or diagnostic agent comprising a --PR.sub.2 containing biomolecule.

  7. Bifunctional chelates of RH-105 and AU199 as potential radiotherapeutic agents

    Energy Technology Data Exchange (ETDEWEB)

    Droege, P.

    1997-03-01

    Research is presented on new bifunctional chelating ligand systems with stability on the macroscopic and radiochemical levels. The synthesis of the following complexes are described: rhodium 105, palladium 109, and gold 198.

  8. Subclinical renal abnormalities in young thalassemia major and intermedia patients and its relation to chelation therapy

    Directory of Open Access Journals (Sweden)

    Amira A.M. Adly

    2014-10-01

    Conclusion: Subclinical renal affection can start earlier in TM patients compared to TI. Poor chelation is associated with early signs of renal affection. Periodic renal assessment of those patients is mandatory as they may be affected by hidden renal dysfunction.

  9. Nonionic metal-chelating surfactants mediated solvent-free thermo-induced separation of uranyl

    Energy Technology Data Exchange (ETDEWEB)

    Larpent, Ch.; Prevost, S. [Versailles-St-Quentin Univ., Institut Lavoisier, UMR-CNRS 8180, 78 - Versailles (France); Prevost, S.; Zemb, Th.; Testard, F. [CEA Saclay, Dept. de Recherche sur l' Etat Condense, les Atomes et les Molecules (DSM/DRECAM/SCM/LIONS), 91 - Gif sur Yvette (France); Berthon, L. [CEA Valrho, Site de Marcoule, Dept. Radiochimie et Procedes (DEN/DRCP/SCPS/LCSE), 30 (France)

    2007-08-15

    Thermo-responsive metal-chelating surfactants permit the solvent-free, cloud point extraction of uranyl nitrate and afford a real molecular economy compared to conventional separation techniques. (authors)

  10. The Management of Iron Chelation Therapy: Preliminary Data from a National Registry of Thalassaemic Patients

    Directory of Open Access Journals (Sweden)

    Adriana Ceci

    2011-01-01

    Full Text Available Thalassaemia and other haemoglobinopathies constitute an important health problem in Mediterranean countries, placing a tremendous emotional, psychological, and economic burden on their National Health systems. The development of new chelators in the most recent years had a major impact on the treatment of thalassaemia and on the quality of life of thalassaemic patients. A new initiative was promoted by the Italian Ministry of Health, establishing a Registry for thalassaemic patients to serve as a tool for the development of cost-effective diagnostic and therapeutic approaches and for the definition of guidelines supporting the most appropriate management of the iron-chelating therapy and a correct use of the available iron-chelating agents. This study represents the analysis of the preliminary data collected for the evaluation of current status of the iron chelation practice in the Italian thalassaemic population and describes how therapeutic interventions can widely differ in the different patients' age groups.

  11. The Management of Iron Chelation Therapy: Preliminary Data from a National Registry of Thalassaemic Patients

    Science.gov (United States)

    Ceci, Adriana; Mangiarini, Laura; Felisi, Mariagrazia; Bartoloni, Franco; Ciancio, Angela; Capra, Marcello; D'Ascola, Domenico; Cianciulli, Paolo; Filosa, Aldo

    2011-01-01

    Thalassaemia and other haemoglobinopathies constitute an important health problem in Mediterranean countries, placing a tremendous emotional, psychological, and economic burden on their National Health systems. The development of new chelators in the most recent years had a major impact on the treatment of thalassaemia and on the quality of life of thalassaemic patients. A new initiative was promoted by the Italian Ministry of Health, establishing a Registry for thalassaemic patients to serve as a tool for the development of cost-effective diagnostic and therapeutic approaches and for the definition of guidelines supporting the most appropriate management of the iron-chelating therapy and a correct use of the available iron-chelating agents. This study represents the analysis of the preliminary data collected for the evaluation of current status of the iron chelation practice in the Italian thalassaemic population and describes how therapeutic interventions can widely differ in the different patients' age groups. PMID:21738864

  12. Absorption of nitric oxide into aqueous solutions of ferrous chelates accompanied by instantaneous reaction

    NARCIS (Netherlands)

    Demmink, J.F; vanGils, I.C.F.; Beenackers, A.A C M

    1997-01-01

    The absorption of nitric oxide (NO) into aqueous solutions of ferrous chelates of nitrilotriacetic acid (NTA), ethylene diaminetetraacetic acid (EDTA), hydroxyethylenediaminetriacetic acid (HEDTA), and diethylenetriaminepentaacetic acid (DTPA) was studied in a stirred cell reactor. Experimental

  13. Efficient bifunctional gallium-68 chelators for positron emission tomography: tris(hydroxypyridinone) ligands

    OpenAIRE

    Berry, David J; Ma, Yongmin; Ballinger, James R.; Tavaré, Richard; Koers, Alexander; Sunassee, Kavitha; Zhou, Tao; Nawaz, Saima; Mullen, Gregory E. D.; Robert C. Hider; Blower, Philip J.

    2011-01-01

    A new tripodal tris(hydroxypyridinone) bifunctional chelator for gallium allows easy production of 68Ga-labelled proteins rapidly under mild conditions in high yields at exceptionally high specific activity and low concentration.

  14. Click-to-Chelate: Development of Technetium and Rhenium-Tricarbonyl Labeled Radiopharmaceuticals

    Directory of Open Access Journals (Sweden)

    Thomas L. Mindt

    2013-03-01

    Full Text Available The Click-to-Chelate approach is a highly efficient strategy for the radiolabeling of molecules of medicinal interest with technetium and rhenium-tricarbonyl cores. Reaction of azide-functionalized molecules with alkyne prochelators by the Cu(I-catalyzed azide-alkyne cycloaddition (CuAAC; click reaction enables the simultaneous synthesis and conjugation of tridentate chelating systems for the stable complexation of the radiometals. In many cases, the functionalization of (biomolecules with the ligand system and radiolabeling can be achieved by convenient one-pot procedures. Since its first report in 2006, Click-to-Chelate has been applied to the development of numerous novel radiotracers with promising potential for translation into the clinic. This review summarizes the use of the Click-to-Chelate approach in radiopharmaceutical sciences and provides a perspective for future applications.

  15. The iron chelator deferasirox protects mice from mucormycosis through iron starvation

    OpenAIRE

    2007-01-01

    Mucormycosis causes mortality in at least 50% of cases despite current first-line therapies. Clinical and animal data indicate that the presence of elevated available serum iron predisposes the host to mucormycosis. Here we demonstrate that deferasirox, an iron chelator recently approved for use in humans by the US FDA, is a highly effective treatment for mucormycosis. Deferasirox effectively chelated iron from Rhizopus oryzae and demonstrated cidal activity in vitro against 28 of 29 clinical...

  16. Chelation therapy and cardiovascular disease: connecting scientific silos to benefit cardiac patients.

    Science.gov (United States)

    Peguero, Julio G; Arenas, Ivan; Lamas, Gervasio A

    2014-08-01

    Medical practitioners have treated atherosclerotic disease with chelation therapy for over 50 years. Lack of strong of evidence led conventional practitioners to abandon its use in the 1960s and 1970s. This relegated chelation therapy to complementary and alternative medicine practitioners, who reported good anecdotal results. Concurrently, the epidemiologic evidence linking xenobiotic metals with cardiovascular disease and mortality gradually accumulated, suggesting a plausible role for chelation therapy. On the basis of the continued use of chelation therapy without an evidence base, the National Institutes of Health released a Request for Applications for a definitive trial of chelation therapy. The Trial to Assess Chelation Therapy (TACT) was formulated as a 2 × 2 factorial randomized controlled trial of intravenous EDTA-based chelation vs. placebo and high-dose oral multivitamins and multiminerals vs. oral placebo. The composite primary endpoint was death, reinfarction, stroke, coronary revascularization, or hospitalization for angina. A total of 1708 post-MI patients who were 50 years or older with a creatinine of 2.0 or less were enrolled and received 55,222 infusions of disodium EDTA or placebo with a median follow-up of 55 months. Patients were on evidence-based post-MI medications including statins. EDTA proved to be safe. EDTA chelation therapy reduced cardiovascular events by 18%, with a 5-year number needed to treat (NNT) of 18. Prespecified subgroup analysis revealed a robust benefit in patients with diabetes mellitus with a 41% reduction in the primary endpoint (5-year NNT = 6.5), and a 43% 5-year relative risk reduction in all-cause mortality (5-year NNT = 12). The magnitude of benefit is such that it suggests urgency in replication and implementation, which could, due to the excellent safety record, occur simultaneously.

  17. The Role of Chelation in the Treatment of Arsenic and Mercury Poisoning

    OpenAIRE

    Kosnett, Michael J

    2013-01-01

    Chelation for heavy metal intoxication began more than 70 years ago with the development of British anti-lewisite (BAL; dimercaprol) in wartime Britain as a potential antidote the arsenical warfare agent lewisite (dichloro[2-chlorovinyl]arsine). DMPS (unithiol) and DMSA (succimer), dithiol water-soluble analogs of BAL, were developed in the Soviet Union and China in the late 1950s. These three agents have remained the mainstay of chelation treatment of arsenic and mercury intoxication for mor...

  18. Synthesis, Characterization and Chelating Properties of 4-Butyrylsemicarbazone-1-phenyl-3-methyl-2-pyrazolin-5-one

    Directory of Open Access Journals (Sweden)

    J. D. Patel

    2010-01-01

    Full Text Available 4-Butyrylsemicarbazone-1-phenyl-3-methyl-2-pyrazolin-5-one (BUMP-SC was prepared and its metal chelates of Cu2+, Ni2+, Co2+, Mn2+, Fe2+, Fe3+, Cr3+, UO2 and OV were prepared. The ligands and its chelates were characterized by elemental analysis, metal:ligand (M:L stoichiometry, IR-electronic spectral studies and magnetic properties. The compounds also were screened for their antimicrobial activity.

  19. Role of the Symmetry of Multipoint Hydrogen Bonding on Chelate Cooperativity in Supramolecular Macrocyclization Processes.

    Science.gov (United States)

    Montoro-García, Carlos; Camacho-García, Jorge; López-Pérez, Ana M; Mayoral, María J; Bilbao, Nerea; González-Rodríguez, David

    2016-01-01

    Herein, we analyze the intrinsic chelate effect that multipoint H-bonding patterns exert on the overall energy of dinucleoside cyclic systems. Our results indicate that the chelate effect is regulated by the symmetry of the H-bonding pattern, and that the effective molarity is reduced by about three orders of magnitude when going from the unsymmetric ADD-DAA or DDA-AAD patterns to the symmetric DAD-ADA pattern.

  20. ORGANIC CHELATING REAGENT ON REDOX ADSORPTION OF ACTIVATED CARBON FIBER TOWARDS Au3+

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Organic chelating reagent influences upon the redox adsorption of activated carbon fibertowards Au3- were systematically investigated. The experimental results indicated that the presenceof organic chelating reagent on activated carbon fiber strongly affects adsorption capacity ofactivated carbon fiber towards Au3+. The reduction-adsorption amount of Au3+ increased three timesby the presence of 8-quinolinol. Furthermore, The reduction-adsorption amount of Au3+ depended onthe pH value of adsorption and temperature.

  1. Optimization of chelators to enhance uranium uptake from tailings for phytoremediation.

    Science.gov (United States)

    Jagetiya, Bhagawatilal; Sharma, Anubha

    2013-04-01

    A greenhouse experiment was set up to investigate the ability of citric acid (CA), oxalic acid (OA), nitrilotriacetic acid (NTA) and EDTA for phytoremediation of uranium tailings by Indian mustard [Brassica juncea (L.) Czern. et Coss]. Uranium tailings were collected from Umra mining region and mixed with 75% of garden soil which yielded a 25:75 mixture. Prepared pots were divided into four sets and treated with following different concentrations - 0.1, 0.5, 2.5 and 12.5 mmol kg(-1) soil additions for each of the four chelators. Control pots which were not treated with chelators. Experiments were conducted in completely randomized block design with triplicates. The optimum concentrations of these chelators were found on the basis of biomass production, tolerance and accumulation potential. The data collected were expressed statistically. EDTA produced maximum growth depression whereas, minimum occurred in the case of NTA. Maximum U uptake (3.5-fold) in the roots occurred at 2.5 mmol of CA, while NTA proved to be the weakest for the same purpose. Severe toxicity in the form of reduced growth and plant death was recorded at 12.5 mmol of each chelator. Minimum growth inhibition produced by chelators occurred in NTA which was followed by OA, moderate in CA and maximum was traced in EDTA applications. Chelator strengthened U uptake in the present study follows the order: CA>EDTA>OA>NTA.

  2. Donor-Appended N,C-Chelate Organoboron Compounds: Influence of Donor Strength on Photochromic Behaviour.

    Science.gov (United States)

    Mellerup, Soren K; Yuan, Kang; Nguyen, Carmen; Lu, Zheng-Hong; Wang, Suning

    2016-08-22

    Recently, four-coordinated N,C-chelate organoboron compounds have been found to show many interesting photochemical transformations depending on the nature of their chelating framework. As such, the effect of substitution on the chelate ligand has been well-established and understood, but the impact of the aryl groups attached to the boron atom remains less clear. To investigate the effect of enhanced charge-transfer character, a series of new N,C-chelate organoboron compounds with donor-functionalized aryl groups have been synthesized and characterized using NMR, UV/Vis, and electrochemical methods. These compounds were found to possess bright and tunable charge-transfer luminescence which is dependent on the donor strength of the amino substituent. In addition, some of these compounds undergo photochromic switching, producing dark isomers of various colors. This work establishes that donor-functionalization of the aryl groups in N,C-chelate boron compounds is an effective strategy for tuning both the photophysical and photochemical properties of such systems. The new findings also help elucidate the influence of electronic structure on the photoreactivity of N,C-chelate organoboron compounds which appears to be as important as steric crowding around the boron atom.

  3. Effects of single and combined heavy metals and their chelators on aphid performance and preferences.

    Science.gov (United States)

    Stolpe, Clemens; Müller, Caroline

    2016-12-01

    When present at elevated levels in the environment, heavy metals are toxic for most organisms. However, so-called hyperaccumulator plants tolerate heavy metals and use chelators for their internal long-distance transport. Thus, phloem-sucking insects may come in contact with the chelated metals. In the present study, the effects of individual and combined heavy metals, zinc (Zn) and cadmium (Cd), as well as of common chelators, nicotianamine and phytochelatin, were investigated on the performance, preferences, and metal accumulation of the generalist aphid Myzus persicae, using artificial diets. Added Zn increased aphid growth, whereas Cd reduced the survival of aphids. Chelators had neither protective nor negative effects on aphids. The combination of the 2 heavy metals in chelated or nonchelated form caused a potentiation effect that led to an extinction of the aphids within less than 2 wk, before they could reproduce. Both Cd and Zn accumulated in the aphids, indicating a possible biomagnification. In choice assays, aphids preferred diets amended with Zn with or without nicotianamine compared to a control diet. In contrast, a Cd-containing diet led to neither attraction nor aversion. The present study provides insight into how mixtures of heavy metals and their chelators influence the life history of a generalist aphid. The results have implications for the use of phytoremediation to remove heavy metals from contaminated soils. Environ Toxicol Chem 2016;35:3023-3030. © 2016 SETAC. © 2016 SETAC.

  4. The role of chelation in the treatment of arsenic and mercury poisoning.

    Science.gov (United States)

    Kosnett, Michael J

    2013-12-01

    Chelation for heavy metal intoxication began more than 70 years ago with the development of British anti-lewisite (BAL; dimercaprol) in wartime Britain as a potential antidote the arsenical warfare agent lewisite (dichloro[2-chlorovinyl]arsine). DMPS (unithiol) and DMSA (succimer), dithiol water-soluble analogs of BAL, were developed in the Soviet Union and China in the late 1950s. These three agents have remained the mainstay of chelation treatment of arsenic and mercury intoxication for more than half a century. Animal experiments and in some instances human data indicate that the dithiol chelators enhance arsenic and mercury excretion. Controlled animal experiments support a therapeutic role for these chelators in the prompt treatment of acute poisoning by arsenic and inorganic mercury salts. Treatment should be initiated as rapidly as possible (within minutes to a few hours), as efficacy declines or disappears as the time interval between metal exposure and onset of chelation increases. DMPS and DMSA, which have a higher therapeutic index than BAL and do not redistribute arsenic or mercury to the brain, offer advantages in clinical practice. Although chelation following chronic exposure to inorganic arsenic and inorganic mercury may accelerate metal excretion and diminish metal burden in some organs, potential therapeutic efficacy in terms of decreased morbidity and mortality is largely unestablished in cases of chronic metal intoxication.

  5. Hydroxypyri(mi)dine-based chelators as antidotes of toxicity due to aluminum and actinides.

    Science.gov (United States)

    Santos, M A; Esteves, M A; Chaves, S

    2012-01-01

    This review is focused on recent developments on hydroxypyri(mi)dines, as aluminum and actinide chelating agents to combat the toxicity due to accumulations of these metal ions in human body resulting from excessive metal exposure. After a brief update revision of the most common processes of aluminum (Al) exposure, as well as the associated toxicities and pathologies, we will focus on the current available Al chelators and future perspective as potential antidotes of Al toxicity. Due to the similarity between Al and Fe, a major emphasis is given to the hydroxypyridinone and hydroxypyrimidinone chelators, since they are analogues of the current iron chelators in clinical use (DFP and DFO). This review includes issues such as molecular design strategies and corresponding effects on the associated physico-chemical properties, lipo-hydrophilic balance, toxicity, in vivo bioassays and current clinical applications. The hydroxypyri(mi)dine chelators are also suitable for other hard metal ions, such as the radiotoxic actinides, and so a brief review is included on the applications of these chelators in actinides scavenging.

  6. Effects of micronutrients deficiency and inoculation with arbuscular mycorrhizal fungi on chelator exudation by tomato root

    Directory of Open Access Journals (Sweden)

    E. Shirmohammadi

    2010-12-01

    Full Text Available Arbuscular mycorrhizal fungi (AMF can affect their host plants growth through nutrient uptake enhancement. Determination of chelators (siderophores and phytosiderophores in root leachates is of importance in order to account for the effects of AMF on nutrient uptake by plants. In this study, tomato plants were inoculated with either Glomus intraradices or Glomus etunicatum or left un-inoculated as non-mycorrhizal control, in pots containing sterile and acid washed perlite. Rorison’s nutrient solution harbouring three levels of Fe, Mn, Zn and Cu (full strength, half strength and without micronutrients was applied to the pots during three month- growth period. Root leachates were collected and total chelator concentration was quantified by titration with DTPA. Plant roots showed lower mycorrhizal colonization in this condition. The amounts of chelators produced by roots were significantly different in AMF species. In plants inoculated with G. intraradices, the highest chelator production occurred in the absence of micronutrients and in its half strength as well, but the micronutrient levels had no significant effect on chelator production in plants inoculated with G. etunicatum. In the absence of micronutrients, chelator production was higher in G.intraradices inoculated plants compared to the G. etunicatum ones.

  7. ELECTED PROBLEMS RELATED TO ENVIRONMENTAL HEAVY METALS EXPOSURE AND CHELATION THERAPY

    Directory of Open Access Journals (Sweden)

    Anna Skoczyńska

    2010-09-01

    Full Text Available Background: Exposure to heavy metals leads to functional and metabolic disturbances and many of them are included in pathogenesis of common diseases (arterial hypertension, atherosclerosis, neurodegenerative processes. In this context new therapeutic and prophylactic strategies are necessary. Patients diagnosed with chronic heavy metals intoxication usually require chelation to increase mobilisation of metals from tissues and elimination of them via urine. Acute poisoning with toxic metal may be difficult to diagnosis, especially in case of accidental intoxication or suicidal intention. Patients also require chelation after causative factor is identified. Objectives: To describe some problems connected with toxicity of metals poisoning and to review pharmacologic therapies that could have a role in poisoning with metals. Methods: A review of the literature was carried out and expert opinion expressed. Results/conclusion: Chelation is a common therapy in case of poisoning with toxic metals but it is satisfied only partially. A combined therapy with structurally different chelators or long-term acting chelators could become viable alternatives in the future. A combined therapy with an antioxidant plus chelator may be a good choice in patients chronically poisoned with metals. Exposure to lead should be taken into account during estimation of global cardiovascular risk.

  8. Antidiabetic effect of glucosaminic acid-cobalt (II chelate in streptozotocin-induced diabetes in mice

    Directory of Open Access Journals (Sweden)

    Talba T

    2011-04-01

    Full Text Available Tahirou Talba1, Xia Wen Shui1, Qinyuan Cheng1,2, Xin Tian21Key Laboratory of Food Processing Technology, 2School of Medicine and Pharmaceutics, Jiangnan University, Wuxi, Jiangsu, People's Republic of ChinaBackground: The purpose of this study was to assess the in vivo ability of glucosaminic acid-cobalt (II chelate to reduce glycemia.Methods: Different concentrations of chelate solution were administrated to mice with diabetes induced by streptozotocin. Daily oral administration of chelate solution 0.4 mL at various concentrations (0.32–0.4 g/mL led to reduction in water intake by the diabetic mice after 5 days of treatment, with a subsequent reduction in glucose levels observed 2 weeks later. Daily food intake was related to both chelate concentration as well as glycemia reduction. The food intake of mice treated with glucosaminic acid-cobalt (II chelate solution was 1.5-fold that of untreated mice.Keywords: glucosaminic acid, cobalt, chelate, streptozotocin, glycemia reduction

  9. Improvement of application properties of chitosan-based food packaging films by lavender essential oil%薰衣草精油改善壳聚糖基食品包装膜的应用品质

    Institute of Scientific and Technical Information of China (English)

    张赟彬; 王景文; 李月霞; 王一非; 姜萍萍; 刘笑宇

    2014-01-01

    potential biodegradable material due to its edibility, film-forming capacity, non-toxicity, antibacterial activity, biocompatibility and biodegradability. Traditional chitosan-based composite films are made by the casting-evaporation method. However, inferior waterproof and mechanical properties limit their applications in food package industries. Many researches have been conducted to improve the CS film. Incorporating one or several substancesinto CS film have been widespreadly used. Moreover, acetic acid and chitosan-acetate can be removed from traditionally prepared CS film by alkali leaching, resulting in lower film water-solubility. Lavender essential oil (LEO) can be used as sedative, antispasmodic, antiviral and bacteriostat in industries of perfume, aromatherapy and pharmacy. LEO can also be used as a natural spice in drink, ice cream, candy, bakery and chewing gum. In order to improve the physical and mechanical properties of conventional chitosan-based food packaging films, lavender essential oil/chitosan composite films were made with CS by casting-evaporation-alkali leaching method in this study. The films microstructures were characterized by Fourier transform infrared reflectance spectroscopy (FTIR), X-ray diffraction (XRD). The impacts of LEO content on the thickness, mechanical properties, volatiles content, water contact angle, water solubility and swelling property of films were investigated. The results indicated that the partial functional group’s locations of CS matrix were occupied by the LEO ingredients with reduced vibration intensity of covalent bond of CS. Reduced free hydrogen group could form hydrophilic bonds with water, then resulted in the loss of moisture content of films. Moreover, Chitosan-acetate content increased by incorporating LEO. The thicknesses of all films ranged from (20.60±0.34) μm to (23.35±0.65) μm. There was no linear relationship between the film thickness and LEO concentration. Tensile strength (TS) and elongation at

  10. A high capacity manganese-based sorbent for regenerative high temperature desulfurization with direct sulfur production conceptual process application to coal gas cleaning

    Energy Technology Data Exchange (ETDEWEB)

    Bakker, W.J.W.; Kapteijn, F.; Moulijn, J.A. [Delft University of Technology, Delft (Netherlands)

    2003-12-15

    A high capacity, monolith or particle shaped, regenerable sorbent has been developed for the desulfurization of a dry type coal gas. It consists of crystalline MnAl{sub 2}O{sub 4}, a small amount of disperse MnO, and an amorphous Mn-Al-O phase. Elemental sulfur is the only observed regeneration product during regeneration with SO{sub 2}. The sorbent can be used in the temperature range between 673 and 1273 K but the optimum capacity is utilized between 1100 and 1200 K. For regeneration with SO{sub 2} the regeneration temperature should be > 873 K to avoid sulfate formation. The sulfur uptake capacity is high and amounts up to 20 wt.% S and the sorbent performance appears to be stable during at least 110 sulfiding and regeneration cycles at 1123 K. For temperatures above 1100 K thermodynamic calculations are in accordance with the observed (solid) phases after sulfiding and regeneration, indicating the predictive potential for high temperatures. The performance of the surface sites that play an important role during desulfurization can, however, not be predicted. The regenerative removal of H{sub 2}S, COS, HCl and HF can possibly take place simultaneously with the same sorbent. A new conceptual process configuration for high temperature coal gas cleaning and sorbent regeneration is proposed. Compared to other processes, less heat exchange equipment is required and no Claus unit is necessary to convert the regeneration product to sulfur.

  11. Electrospun TiO2/C Nanofibers As a High-Capacity and Cycle-Stable Anode for Sodium-Ion Batteries.

    Science.gov (United States)

    Xiong, Ya; Qian, Jiangfeng; Cao, Yuliang; Ai, Xinping; Yang, Hanxi

    2016-07-06

    Nanosized TiO2 is now actively developed as a low-cost and potentially high capacity anode material of Na-ion batteries, but its poor capacity utilization and insufficient cyclability remains an obstacle for battery applications. To overcome these drawbacks, we synthesized electrospun TiO2/C nanofibers, where anatase TiO2 nanocrystals with a diameter of ∼12 nm were densely embedded in the conductive carbon fibers, thus preventing them from aggregating and attacking by electrolyte. Due to its abundant active surfaces of well-dispersed TiO2 nanocrytals and high electronic conductivity of the carbon matrix, the TiO2/C anode shows a high redox capacity of ∼302.4 mA h g(-1) and a high-rate capability of 164.9 mAh g(-1) at a very high current of 2000 mA g(-1). More significantly, this TiO2/C anode can be cycled with nearly 100% capacity retention over 1000 cycles, showing a sufficiently long cycle life for battery applications. The nanofibrous architecture of the TiO2/C composite and its superior electrochemical performance may provide new insights for development of better host materials for practical Na-ion batteries.

  12. Fluorine-Doped Tin Oxide Nanocrystal/Reduced Graphene Oxide Composites as Lithium Ion Battery Anode Material with High Capacity and Cycling Stability.

    Science.gov (United States)

    Xu, Haiping; Shi, Liyi; Wang, Zhuyi; Liu, Jia; Zhu, Jiefang; Zhao, Yin; Zhang, Meihong; Yuan, Shuai

    2015-12-16

    Tin oxide (SnO2) is a kind of anode material with high theoretical capacity. However, the volume expansion and fast capability fading during cycling have prevented its practical application in lithium ion batteries. Herein, we report that the nanocomposite of fluorine-doped tin oxide (FTO) and reduced graphene oxide (RGO) is an ideal anode material with high capacity, high rate capability, and high stability. The FTO conductive nanocrystals were successfully anchored on RGO nanosheets from an FTO nanocrystals colloid and RGO suspension by hydrothermal treatment. As the anode material, the FTO/RGO composite showed high structural stability during the lithiation and delithiation processes. The conductive FTO nanocrystals favor the formation of stable and thin solid electrolyte interface films. Significantly, the FTO/RGO composite retains a discharge capacity as high as 1439 mAhg(-1) after 200 cycles at a current density of 100 mAg(-1). Moreover, its rate capacity displays 1148 mAhg(-1) at a current density of 1000 mAg(-1).

  13. Design and clinical evaluation of a high-capacity digital image archival library and high-speed network for the replacement of cinefilm in the cardiac angiography environment

    Science.gov (United States)

    Cusma, Jack T.; Spero, Laurence A.; Groshong, Bennett R.; Cho, Teddy; Bashore, Thomas M.

    1993-09-01

    An economical and practical digital solution for the replacement of 35 mm cine film as the archive media in the cardiac x-ray imaging environment has remained lacking to date due to the demanding requirements of high capacity, high acquisition rate, high transfer rate, and a need for application in a distributed environment. A clinical digital image library and network based on the D2 digital video format has been installed in the Duke University Cardiac Catheterization Laboratory. The system architecture includes a central image library with digital video recorders and robotic tape retrieval, three acquisition stations, and remote review stations connected via a serial image network. The library has a capacity for over 20,000 Gigabytes of uncompressed image data, equivalent to records for approximately 20,000 patients. Image acquisition in the clinical laboratories is via a real-time digital interface between the digital angiography system and a local digital recorder. Images are transferred to the library over the serial network at a rate of 14.3 Mbytes/sec and permanently stored for later review. The image library and network are currently undergoing a clinical comparison with cine film for visual and quantitative assessment of coronary artery disease. At the conclusion of the evaluation, the configuration will be expanded to include four additional catheterization laboratories and remote review stations throughout the hospital.

  14. Improved sodium-storage performance of stannous sulfide@reduced graphene oxide composite as high capacity anodes for sodium-ion batteries

    Science.gov (United States)

    Wu, Lin; Lu, Haiyan; Xiao, Lifen; Ai, Xinping; Yang, Hanxi; Cao, Yuliang

    2015-10-01

    Stannous sulfide@reduced graphene oxide (SnS@RGO) composite is successfully synthesized via a facile precipitation route. The structural and morphological characterizations reveal SnS@RGO composites are composed of SnS nanoparticles of the size 5-10 nm, which are uniformly anchored on the surface of RGO. The electrochemical measurements demonstrate the reversible capacity of the SnS@RGO composite - that includes contributions from the conversion reaction of SnS to Sn and NaxS and the alloying reaction of Sn to NaxSn. The SnS@RGO electrode exhibits a reversible capacity of 457 mAh g-1 at 20 mA g-1, superior cycling stability (94% capacity retention over 100 cycles at 100 mA g-1) and adequate rate performance. Compared to the neat SnS nanoparticles, the enhanced electrochemical performance of the SnS@RGO composite is primarily due to the incorporation of RGO as a highly conductive, flexible component as well as possessing a large available surface area, which provides desirable properties such as improved electronic contact between active materials, aggregation suppression of intermediate products, and alleviation of the volume change during sodiation and desodiation. Encouraging experimental results suggest that the SnS@RGO composite is a promising material to achieve a high-capacity and stable anode for NIBs.

  15. Reduced graphene oxide/carbon nanotubes sponge: A new high capacity and long life anode material for sodium-ion batteries

    Science.gov (United States)

    Yan, Dong; Xu, Xingtao; Lu, Ting; Hu, Bingwen; Chua, Daniel H. C.; Pan, Likun

    2016-06-01

    Reduced graphene oxide/carbon nanotubes (CNTs) sponge (GCNTS) is fabricated via a simple freeze drying of graphene oxide/CNTs mixed solution and subsequent thermal treatment in nitrogen atmosphere, and used as anodes for sodium-ion batteries (SIBs) for the first time. The morphology, structure and electrochemical performance of GCNTS are characterized by field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, nitrogen adsorption-desorption isotherms, galvanostatic charge/discharge tests, cyclic voltammetry and electrochemical impedance spectroscopy, respectively. The results show that GCNTS with 20 wt % CNTs has a highest charge capacity of 436 mA h g-1 after 100 cycles at a current density of 50 mA g-1 and even at a high current density of 10 A g-1, a capacity of 195 mA h g-1 is maintained after 7440 cycles. The high capacity, excellent rate performance and long life cycling enable the GCNTS to be a promising candidate for practical SIBs.

  16. Predicate Model on NOx Emission of a High Capacity Firing Boiler%大型燃煤锅炉氮氧化物排放预测模型

    Institute of Scientific and Technical Information of China (English)

    凡荣荣; 杨巨生; 谢克昌

    2012-01-01

    随着环保要求的不断提高,大型燃煤电厂锅炉的NOx排放特性日益受到关注。借助某600MW锅炉燃烧调整试验数据,采用BP-adaboost算法建立了NOx排放特性的预测模型。研究结构表明,与BP神经网络建立的NOx特性排放模型相比,该模型能根据燃煤特性及各种操作参数更加准确预测锅炉在不同工况下NOx排放特性。%With the development of the restricted environmental protection demand,more attention is paid to the NOx emission property of the high capacity tangential firing boiler.The estimation model has been established by means of BP-adaboost based on a 600MW boiler combustion adjustment testing data.It is proven by the research result that such a model can predicate the NOx emission more accurate than that established by BP network under various operating conditions.

  17. Carbon-Coated Honeycomb Ni-Mn-Co-O Inverse Opal: A High Capacity Ternary Transition Metal Oxide Anode for Li-ion Batteries

    Science.gov (United States)

    McNulty, David; Geaney, Hugh; O’Dwyer, Colm

    2017-01-01

    We present the formation of a carbon-coated honeycomb ternary Ni-Mn-Co-O inverse opal as a conversion mode anode material for Li-ion battery applications. In order to obtain high capacity via conversion mode reactions, a single phase crystalline honeycombed IO structure of Ni-Mn-Co-O material was first formed. This Ni-Mn-Co-O IO converts via reversible redox reactions and Li2O formation to a 3D structured matrix assembly of nanoparticles of three (MnO, CoO and NiO) oxides, that facilitates efficient reactions with Li. A carbon coating maintains the structure without clogging the open-worked IO pore morphology for electrolyte penetration and mass transport of products during cycling. The highly porous IO was compared in a Li-ion half-cell to nanoparticles of the same material and showed significant improvement in specific capacity and capacity retention. Further optimization of the system was investigated by incorporating a vinylene carbonate additive into the electrolyte solution which boosted performance, offering promising high-rate performance and good capacity retention over extended cycling. The analysis confirms the possibility of creating a ternary transition metal oxide material with binder free accessible open-worked structure to allow three conversion mode oxides to efficiently cycle as an anode material for Li-ion battery applications. PMID:28186183

  18. Preparation, structure study and electrochemistry of layered H2V3O8 materials: High capacity lithium-ion battery cathode

    Science.gov (United States)

    Sarkar, Sudeep; Bhowmik, Arghya; Pan, Jaysree; Bharadwaj, Mridula Dixit; Mitra, Sagar

    2016-10-01

    The present study explores H2V3O8 as high capacity cathode material for lithium-ion batteries (LIB's). Despite having high discharge capacity, H2V3O8 material suffers from poor electrochemical stability for prolonged cycle life. Ultra-long H2V3O8 nanobelts with ordered crystallographic patterns are synthesized via a hydrothermal process to mitigate this problem. The growth of the crystal is facile along [001] direction, and the most common surface is (001) as suggested by Wulff construction study. Electrochemical performance of H2V3O8 cathode is tested against Li/Li+ at various current rates. At 50 mA g-1current rate, it delivers a discharge capacity of 308 mAh g-1, whereas, at 3000 mA g-1, an initial discharge capacity of 144 mAh g-1 is observed and stabilized at 100 mAh g-1 till 500 cycles. Further, the density functional theory (DFT) based simulations study of both the pristine and lithiated phase of H2V3O8 cathode materials is undertaken. DFT study reveals the presence of hydrogen as hydroxyl unit in the framework of the host. In correlation, the magnetic property of vanadium atoms is examined in detail with through partial density of states (PDOS) calculation during three stage lithiation processes and evaluating various potential steps involved in lithium insertion.

  19. Quantifying the environmental impact of a Li-rich high-capacity cathode material in electric vehicles via life cycle assessment.

    Science.gov (United States)

    Wang, Yuqi; Yu, Yajuan; Huang, Kai; Chen, Bo; Deng, Wensheng; Yao, Ying

    2017-01-01

    A promising Li-rich high-capacity cathode material (xLi2MnO3·(1-x)LiMn0.5Ni0.5O2) has received much attention with regard to improving the performance of lithium-ion batteries in electric vehicles. This study presents an environmental impact evaluation of a lithium-ion battery with Li-rich materials used in an electric vehicle throughout the life cycle of the battery. A comparison between this cathode material and a Li-ion cathode material containing cobalt was compiled in this study. The battery use stage was found to play a large role in the total environmental impact and high greenhouse gas emissions. During battery production, cathode material manufacturing has the highest environmental impact due to its complex processing and variety of raw materials. Compared to the cathode with cobalt, the Li-rich material generates fewer impacts in terms of human health and ecosystem quality. Through the life cycle assessment (LCA) results and sensitivity analysis, we found that the electricity mix and energy efficiency significantly influence the environmental impacts of both battery production and battery use. This paper also provides a detailed life cycle inventory, including firsthand data on lithium-ion batteries with Li-rich cathode materials.

  20. Mg{sub 2}FeH{sub 6}-based nano composite with high capacity of hydrogen storage processed by reactive milling

    Energy Technology Data Exchange (ETDEWEB)

    Asselli, A.A.C., E-mail: asselli@gmail.co [Universidade Federal de Sao Carlos (PPG-CEM/UFSCar), SP (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais; Kiminami, C.S.; Jorge Junior, A.M.; Iskikawa, T.T.; Botta Filho, W.J. [Universidade Federal de Sao Carlos (DEMa/UFSCar), SP (Brazil). Dept. de Engenharia de Materiais

    2010-07-01

    The compound Mg{sub 2}FeH{sub 6} was synthesized from a 2Mg-Fe mixture in a single process by high-energy ball milling under hydrogen atmosphere at room temperature. The complex hydride was prepared from Mg powder and granulated or powdered Fe using a planetary mill. The phase evolution during different milling times was performed by X-rays diffraction technique. The dehydrogenation behavior of the hydride was investigated by simultaneous thermal analysis of differential scanning calorimetry and thermogravimetry coupled with mass spectrometry. The use of powdered iron as starting material promoted conversion to complex hydride at shorter milling times than when granulated iron was used, nevertheless, after 24 hours of milling the 2Mg-Fe (powdered or granulated) mixtures presented similar dehydrogenation behavior. The gravimetric capacity of hydrogen was on average 3.2 wt.%, however, changing the proportions between the reagents to 3Mg-Fe a Mg{sub 2}FeH{sub 6}-based nanocomposite with high capacity of hydrogen storage (5.2 wt.%) was obtained. (author)

  1. Preparation of high-capacity, weak anion-exchange membranes by surface-initiated atom transfer radical polymerization of poly(glycidyl methacrylate) and subsequent derivatization with diethylamine

    Science.gov (United States)

    Qian, Xiaolei; Fan, Hua; Wang, Chaozhan; Wei, Yinmao

    2013-04-01

    Ion-exchange membrane is of importance for the development of membrane chromatography. In this work, a high-capacity anion-exchange membrane was prepared by grafting of glycidyl methacrylate (GMA) onto the surface of regenerated cellulose (RC) membranes via surface-initiated atom transfer radical polymerization (SI-ATRP) and subsequent derivatization with diethylamine. Attenuated total reflectance Fourier-transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) were used to characterize changes in the chemical functionality, surface topography and pore morphology of the modified membranes. The static capacity of the prepared anion-exchange membrane was evaluated with bovine serum albumin (BSA) as a model protein. The results indicated that the anion-exchange membrane which could reach a maximum capacity of 96 mg/mL for static adsorption possesses a higher adsorption capacity, and the adsorption capacity increases with the polymerization time. The effect of pH and salt concentration confirmed that the adsorption of BSA followed ion-exchange mechanism. The established method would have potential application in the preparation of anion-exchange membrane.

  2. Progress in application of chitosan based magnetic hybrid composites in water treatment%壳聚糖基磁性杂化材料在水处理应用中的进展

    Institute of Scientific and Technical Information of China (English)

    施建刚; 赵振河; 何雪梅; 郑敏捷; 杨少艳

    2012-01-01

    壳聚糖具有良好的生物相容性、可降解性,其分子链上丰富的羟基和氨基使其对于金属离子、染料、蛋白质等物质有良好的亲和力,被广泛应用于生物工程、医药、食品、化工、环境等众多领域。纳米磁性材料(包括Fe2O3、Fe3O4)作为一种磁性原料,不但具备良好的磁导向性,也具有良好的生物相融性,可与多种功能分子结合,如蛋白质,核酸,生物素等。本文通过对磁性壳聚糖材料的制备及其吸附废水中染料、重金属离子、蛋白分子等应用进行了综述,对其应用前景进行展望。%Chitosan has good biological compatibility and degradability. It has good affinity to metallic ion dyes and protein for its rich hydroxyl and amino groups contained in its molecular chain. It is widely applied in the bio-engineering, medicine, food, chemical industry and environment fields, etc. Biomacromolecule coated with nanomagnetic material (including Fe203 and Fe304) has good magnetic conductivity and compatibility so that it can be combined with many kinds of functional polymers like protein, nucleic acid and the biological element and so on. This article reviewed the preparation of chitosan based magnetic materials and its application in adsorption of dyes, heaw metal ion, and protein in waste water. In the end, the application prospect of chitasan, based magnetic materials was presented in this paper

  3. O/W型茶树精油壳聚糖乳化膜材料的制备%Preparation of O/W chitosan-based tea tree essential oil emulsive film material

    Institute of Scientific and Technical Information of China (English)

    葛彦; 葛明桥

    2014-01-01

    以壳聚糖为基材,利用表面活性剂吐温80包覆茶树精油形成乳液,采用铸膜法制备 O/W 型茶树精油壳聚糖乳化膜,运用扫描电镜、红外光谱仪等对膜的结构特征和性能进行表征.结果表明,茶树精油被吐温80包覆,在壳聚糖溶液中形成稳定的 O/W乳液型铸膜液,成膜后茶树精油微粒呈球形,直径约为1μm.性能测试结果表明,茶树精油的添加大大提高了壳聚糖膜的抑菌效果,该膜具有较好的舒适性、吸水性、透气性和抑菌性,有望将来成为一种新型的医用材料.%Tea tree essential oil was coated with Tween 80 as surfactant to form an emulsion.Chitosan was used for the substrate and O/W chitosan-based tea tree essential oil emulsive film was prepared with cast method. Scanning electron microscopy,infrared spectroscopy,etc.were used to characterize the film’s structural feature and performance.The results showed that tea tree essential oil in chitosan solution was coated by Tween 80 to form a stable O/W emulsion casting solution.The particles of tea tree essential oil were in spherical form with a diameter of about 1μm in the film.The results of performance test indicated that the addition of tea tree es-sential oil greatly enhanced antibacterial effect of chitosan film.Film had good conformability,water absorp-tion,permeability and antibacterial property so that it was expected to be a new type of medical material in the future.

  4. Zinc glycine chelate absorption characteristics in Sprague Dawley rat.

    Science.gov (United States)

    Yue, M; Fang, S L; Zhuo, Z; Li, D D; Feng, J

    2015-06-01

    This study was conducted to investigate absorption characteristics of zinc glycine chelate (Zn-Gly) by evaluating tissues zinc status and the expression of zinc transporters in rats. A total of 24 male rats were randomly allocated to three treatments and administered either saline or 35 mg Zn/kg body weight from zinc sulphate (ZnSO4 ) or Zn-Gly by feeding tube separately. Four rats per group were slaughtered and tissues were collected at 2 and 6 h after gavage respectively. Our data showed that Zn-Gly did more effectively in increasing (p < 0.05) serum zinc levels, and the activities of serum and liver alkaline phosphatase (ALP) and liver Cu/Zn superoxide dismutase (Cu/Zn SOD) at 2 and 6 h. By 2 h after the zinc load, the mRNA and protein abundance of intestinal metallothionein1 (MT1) and zinc transporter SLC30A1 (ZnT1) were higher (p < 0.05), and zinc transporter SLC39A4 (Zip4) lower (p < 0.05) in ZnSO4 compared to other groups. Zinc transporter SLC39A5 (Zip5) mRNA expression was not zinc responsive, but Zip5 protein abundance was remarkably (p < 0.05) increased in ZnSO4 2 h later. Overall, our results indicated that in short-term periods, Zn-Gly was more effective in improving body zinc status than ZnSO4 , and ZnSO4 did more efficiently on the regulation of zinc transporters in small intestine.

  5. Resinas quelantes amidoxímicas Amidoxime chelating resins

    Directory of Open Access Journals (Sweden)

    Fernanda M. B. Coutinho

    1999-12-01

    Full Text Available Resinas quelantes com grupos amidoxima foram sintetizadas por copolimerização em suspensão de acrilonitrila (AN e divinilbenzeno (DVB e subsequente modificação química dos grupos ciano por reação com hidroxilamina. Na copolimerização, a proporção de divinilbenzeno e o grau de diluição foram variados. Gelatina e carbonato de cálcio foram usados como estabilizadores de suspensão e sulfato de sódio foi adicionado para reduzir a solubilidade da acrilonitrila em água, por meio do efeito salting out. Os copolímeros de AN/DVB e as resinas amidoxímicas obtidos foram caracterizados por meio de densidade aparente, área específica, volume de poros e teor de nitrogênio. As resinas amidoxímicas foram também avaliadas em relação a capacidade de complexação de íons cobre.Chelating resins with amidoxime groups were synthesized by suspension copolymerization of acrylonitrile (AN and divinylbenzene (DVB and subsequent chemical modification of cyano groups by reaction with hydroxylamine. In the copolymerization, the proportion of divinylbenzene and the dilution degree were varied. Gelatin and calcium carbonate were used as suspension stabilizers and sodium sulphate was added in order to reduce acrylonitrile solubility in water, by salting out effect. The AN/DVB copolymers and amidoxime resins obtained were characterized by apparent density, surface area, pore volume and by the content of nitrogen. The amidoxime resins were also evaluated in relation to the complexation capacity of copper ion.

  6. Nanoparticle iron chelators: a new therapeutic approach in Alzheimer disease and other neurologic disorders associated with trace metal imbalance.

    Science.gov (United States)

    Liu, Gang; Men, Ping; Harris, Peggy L R; Rolston, Raj K; Perry, George; Smith, Mark A

    2006-10-09

    Accumulating evidence suggests that oxidative stress may be a major etiologic factor in initiating and promoting neurodegeneration in Alzheimer disease. Contributing to this, there is a dyshomeostasis of metal ions in Alzheimer disease with abnormally high levels of redox-active metals, particularly iron, in affected areas of the brain. Although it is unclear whether metal excesses are the sole cause of oxidative stress and neurodegeneration or a by-product of neuronal loss, the finding that metal chelators can partially solubilize amyloid-beta deposits in Alzheimer disease suggests a promising therapeutic role for chelating agents. However, the blood-brain barrier and toxicity of known chelators limit their utility. In this study, we suggest that covalent conjugation of iron chelators with nanoparticles may help overcome the limitations in blood-brain barrier permeability of existing chelation therapy. Using in vitro studies, we have shown that a chelator-nanoparticle system and the chelator-nanoparticle system complexed with iron, when incubated with human plasma, preferentially adsorb apolipoprotein E and apolipoprotein A-I, that would facilitate transport into and out of the brain via mechanisms used for transporting low-density lipoprotein. Our studies suggest a unique approach, utilizing nanoparticles, to transport chelators and chelator-metal complexes in both directions across the blood-brain barrier, thus providing safer and more effective chelation treatment in Alzheimer disease and other neurodegenerative diseases.

  7. Enhancing Potentially Plant-Available Lead Concentrations in Contaminated Residential Soils Using a Biodegradable Chelating Agent

    Science.gov (United States)

    Andra, S.; Datta, R.; Sarkar, D.; Saminathan, S.

    2007-12-01

    Chelation of heavy metals is an important factor in enhancing metal solubility and, hence, metal availability to plants to promote phytoremediation. In the present study, we compared the effects of application of a biodegradable chelating agent, namely, ethylenediaminedisuccinic acid (EDDS) on enhancing plant available form of lead (Pb) in Pb-based paint contaminated residential soils compared to that of a more commonly used, but non-biodegradable chelate, i.e., ethylenediaminetetraacetic acid (EDTA). Development of a successful phytoremediation model for metals such as Pb depends on a thorough understanding of the physical and chemical properties of the soil, along with the optimization of a chelate treatment to mobilize Pb from `unavailable' pools to potentially plant available fraction. In this context, we set out to perform batch incubation experiments to investigate the effectiveness of the two aforementioned chelates in enhancing plant available Pb at four different concentrations (0, 5, 10 and 15 mM/kg soil) and three treatment durations (0, 10 and 30 days). We selected 12 contaminated residential soils from two major metropolitan areas (San Antonio, TX and Baltimore, MD) with varying soil physico-chemical properties - the soils from San Antonio were primarily alkaline and those from Baltimore were typically acidic. Total soil Pb concentrations ranged between 256 mg/kg and 4,182 mg/kg. Our results show that both chelates increased the solubility of Pb, otherwise occluded in the complex soil matrix. For both EDTA and EDDS, the exchangeable concentrations of soil Pb also increased with increase in chelate concentration and incubation time. The most effective treatment was 15 mM chelate kg-1 soil incubated for 30 days, which caused many fold increase in potentially plant available Pb (a combination of the soluble and exchangeable fractions) relative to the unamended controls. Step wise multiple linear regression analysis using chelate-extractable Pb and soil

  8. CARDIAC FUNCTION AND IRON CHELATION IN THALASSEMIA MAJOR AND INTERMEDIA: A REVIEW OF THE UNDERLYING PATHOPHYSIOLOGY AND APPROACH TO CHELATION MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Athanasios Aessopos

    2009-07-01

    Full Text Available Heart disease is the leading cause of mortality and one of the main causes of morbidity in beta-thalassemia. Patients with homozygous thalassemia may have either a severe phenotype which is usually transfusion dependent or a milder form that is thalassemia intermedia.  The two main factors that determine cardiac disease in homozygous β thalassemia are the high output state that results from chronic tissue hypoxia, hypoxia-induced compensatory reactions and iron overload.  The high output state playing a major role in thalassaemia intermedia and the iron load being more significant in the major form. Arrhythmias, vascular involvement that leads to an increased pulmonary vascular resistance and an increased systemic vascular stiffness and valvular abnormalities also contribute to the cardiac dysfunction in varying degrees according to the severity of the phenotype.  Endocrine abnormalities, infections, renal function and medications can also play a role in the overall cardiac function.  For thalassaemia major, regular and adequate blood transfusions and iron chelation therapy are the mainstays of management. The approach to thalassaemia intermedia, today, is aimed at monitoring for complications and initiating, timely, regular transfusions and/or iron chelation therapy.  Once the patients are on transfusions, then they should be managed in the same way as the thalassaemia major patients.  If cardiac manifestations of dysfunction are present in either form of thalassaemia, high pre transfusion Hb levels need to be maintained in order to reduce cardiac output and appropriate intensive chelation therapy needs to be instituted.  In general recommendations on chelation, today, are usually made according to the Cardiac Magnetic Resonance findings, if available.  With the advances in the latter technology and the ability to tailor chelation therapy according to the MRI findings as well as the availability of three iron chelators, together with

  9. Electrospun antibacterial chitosan-based fibers.

    Science.gov (United States)

    Ignatova, Milena; Manolova, Nevena; Rashkov, Iliya

    2013-07-01

    Chitosan is non-toxic, biocompatible, and biodegradable polysaccharide from renewable resources, known to have inherent antibacterial activity, which is mainly due to its polycationic nature. The combining of all assets of chitosan and its derivatives with the unique properties of electrospun nanofibrous materials is a powerful strategy to prepare new materials that can find variety of biomedical applications. In this article the most recent studies on different approaches for preparation of antibacterial fibrous materials from chitosan and its derivatives such as electrospinning, coating, and electrospinning-electrospraying, loading of drugs or bioactive nanoparticles are summarized.

  10. Evaluation of high-capacity cation exchange chromatography for direct capture of monoclonal antibodies from high-titer cell culture processes.

    Science.gov (United States)

    Tao, Yinying; Ibraheem, Aladein; Conley, Lynn; Cecchini, Douglas; Ghose, Sanchayita

    2014-07-01

    Advances in molecular biology and cell culture technology have led to monoclonal antibody titers in excess of 10 g/L. Such an increase can pose concern to traditional antibody purification processes due to limitations in column hardware and binding capacity of Protein A resins. Recent development of high capacity cation exchangers can make cation exchange chromatography (CEX) a promising and economic alternative to Protein A capture. This work investigates the feasibility of using CEX for direct capture of monoclonal antibodies from high titer cell culture fluids. Two resin candidates were selected from seven newer generation cation exchangers for their higher binding capacity and selectivity. Two monoclonal antibodies with widely differing pI values were used to evaluate the capability of CEX as a platform capture step. Screening of loading pH and conductivity showed both resins to be capable of directly capturing both antibodies from undiluted cell culture fluid. At appropriate acidic pH range, product loading of over 65 g/L resin was achieved for both antibodies. A systematic design of experiment (DOE) approach was used to optimize the elution conditions for the CEX step. Elution pH showed the most significant impact on clearance of host cell proteins (HCPs). Under optimal conditions, HCP reduction factors in the range of 9-44 were achieved on the CEX step based on the pI of the antibody. Apart from comparing CEX directly to Protein A as the capture method, material from either modality was also processed through the subsequent polishing steps to compare product quality at the drug substance level. Process performance and product quality was found to be acceptable using the non-affinity based process scheme. The results shown here present a cheaper and higher capacity generic capture method for high-titer antibody processes. © 2014 Wiley Periodicals, Inc.

  11. A high capacity MP3 steganography based on Huffman coding%基于Huffman编码的大容量MP3隐写算法

    Institute of Scientific and Technical Information of China (English)

    严迪群; 王让定; 张力光

    2011-01-01

    A high capacity steganography method for mp3 audios is proposed in this paper. According to the characteristic of Huffman coding, the code words in Huffman tables are first classified to ensure that the embedding operation does not change the bitstream structure in MP3 standard. Then secret data are embedded by replacing the corresponding code words. The embedding strategy is based on multiple-base nation system. The structure of bit stream and the size of the cover audio can be kept unchanged after embedding. The results show that the proposed method can obtain higher hiding capacity and better effi ciency than that of the method under binary case. Furthermore, the imperceptibility can also be better maintained in our method.%本文针对MP3编码标准中哈夫曼码字对特点,提出了一种借助码字替换实现秘密信息隐写的新算法.该算法首先对哈夫曼码表中的码字进行分类,以保证替换操作不改变MP3码流的固定结构,再借鉴混合进制的概念,采用多进制方式隐藏秘密信息.给出了算法在二进制和多进制两种模式下的仿真结果,表明多进制隐写模式可以获得更高的隐写速率和效率,同时算法的感知透明性也能得到较好保持.

  12. Three-dimensional hierarchical porous flower-like nickel-cobalt oxide/multi-walled carbon nanotubes nanocomposite for high-capacity supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Peipei; Hu, Zhonghua, E-mail: huzh@tongji.edu.cn; Liu, Yafei; Yao, Mingming; Zhang, Qiang

    2015-02-15

    Highlights: • 3D hierarchical porous flower-like Ni-Co oxide/MWCNTs was synthesized. • The electrode shows a large specific surface area and desirable mesoporosity. • High specific capacitances and outstanding stability were obtained. • The content of MWCNTs affects the electrochemical properties of the electrode. - Abstract: Three-dimensional (3D) hierarchical porous flower-like nickel-cobalt oxide/multi-walled carbon nanotubes (Ni-Co oxide/MWCNTs) nanocomposites were fabricated by a facile and template-free hydrothermal method as electrodes for high-capacity supercapacitors. The samples were characterized by energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption-desorption and thermal gravimetric analysis (TGA). The electrochemical performance was investigated by cyclic voltammetry (CV), galvanostatic charge-discharge, and cycle life. It was found that Ni-Co oxide/MWCNTs nanocomposites displayed a high specific capacitance (1703 F g{sup −1} at a discharge current density of 1 A g{sup −1}) and, additionally, an excellent cycling performance, retaining 97% of the maximum capacitance after 2000 cycles at 10 A g{sup −1}. Even at a high current density (20 A g{sup −1}), the specific capacitance was still up to 1309 F g{sup −1}. This outstanding capacitive performance may be attributed to the ideal composition of the material and to its unique 3D hierarchical porous flower-like architecture.

  13. [Extraction of Heavy Metals from Sludge Using Biodegradable Chelating Agent N,N-bis(carboxymethyl) Glutamic Acid Tetrasodium].

    Science.gov (United States)

    Wu, Qing; Cui, Yan-rui; Tang, Xiao-xiao; Yang, Hui-juan; Sun, Jian-hui

    2015-05-01

    N, N-bis (carboxymethyl) glutamic acid tetrasodium (GLDA), a novel biodegradable and green chelating agent, has excellent metal chelating ability. Batch experiment was conducted to study the extraction process of Cd, Ni, Cu and Zn in industrial sludge using GLDA. The effects of contact time, pH of the system, content of chelating agent were investigated, and the forms of heavy metals in sludge pre- and post-extraction using the modified BCR sequential extraction procedure were studied. The results showed that GLDA was effective for cadmium extraction in sludge. Several heavy metals could be effectively extracted under the condition of pH 4 and molar ratio of chelating agent to total heavy metal 3:1. Residual fraction took the largest fraction in Zn, which caused the low extraction efficiency of this metal. Chelating properties were related not only to contact time, pH, chelating agent's concentration, and stability constant but also to species distribution of metals.

  14. Comparison of bifunctional chelates for {sup 64}Cu antibody imaging

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Cara L.; Crisp, Sarah; Bensimon, Corinne [MDS Nordion, Vancouver, BC (Canada); Yapp, Donald T.T.; Ng, Sylvia S.W. [British Columbia Cancer Agency Research Centre, Vancouver, BC (Canada); University of British Columba, The Faculty of Pharmaceutical Sciences, Vancouver, BC (Canada); Sutherland, Brent W. [British Columbia Cancer Agency Research Centre, Vancouver, BC (Canada); Gleave, Martin [Prostate Centre at Vancouver General Hospital, Vancouver, BC (Canada); Jurek, Paul; Kiefer, Garry E. [Macrocyclics Inc., Dallas, TX (United States)

    2010-11-15

    Improved bifunctional chelates (BFCs) are needed to facilitate efficient {sup 64}Cu radiolabeling of monoclonal antibodies (mAbs) under mild conditions and to yield stable, target-specific agents. The utility of two novel BFCs, 1-Oxa-4,7,10-triazacyclododecane-5-S-(4-isothiocyanatobenzyl)-4,7,10-triacetic acid (p-SCN-Bn-Oxo-DO3A) and 3,6,9,15-tetraazabicyclo[9.3.1]pentadeca-1(15),11,13-triene-4-S-(4-isothiocyanatobenzyl)-3,6,9-triacetic acid (p-SCN-Bn-PCTA), for mAb imaging with {sup 64}Cu were compared to the commonly used S-2-(4-isothiocyanatobenzyl)-1,4,7,10-tetraazacyclododecane-tetraacetic acid (p-SCN-Bn-DOTA). The BFCs were conjugated to trastuzumab, which targets the HER2/neu receptor. {sup 64}Cu radiolabeling of the conjugates was optimized. Receptor binding was analyzed using flow cytometry and radioassays. Finally, PET imaging and biodistribution studies were done in mice bearing either HER2/neu-positive or HER2/neu-negative tumors. {sup 64}Cu-Oxo-DO3A- and PCTA-trastuzumab were prepared at room temperature in >95% radiochemical yield (RCY) in <30 min, compared to only 88% RCY after 2 h for the preparation of {sup 64}Cu-DOTA-trastuzumab under the same conditions. Cell studies confirmed that the immunoreactivity of the mAb was retained for each of the bioconjugates. In vivo studies showed that {sup 64}Cu-Oxo-DO3A- and PCTA-trastuzumab had higher uptake than the {sup 64}Cu-DOTA-trastuzumab at 24 h in HER2/neu-positive tumors, resulting in higher tumor to background ratios and better tumor images. By 40 h all three of the {sup 64}Cu-BFC-trastuzumab conjugates allowed for clear visualization of the HER2/neu-positive tumors but not the negative control tumor. The antibody conjugates of PCTA and Oxo-DO3A were shown to have superior {sup 64}Cu radiolabeling efficiency and stability compared to the analogous DOTA conjugate. In addition, {sup 64}Cu-PCTA and Oxo-DO3A antibody conjugates may facilitate earlier imaging with greater target to background ratios than

  15. Study Of Fe(iii)-nta Chelates Stability For Applicability In Photo-fenton At Neutral Ph

    OpenAIRE

    De Luca; Antonella; Dantas; Renato F.; Esplugas; Santiago (Archidiócesis) . Arzobispo (Agustín Antolínez).

    2016-01-01

    The stability of ferric nitrilotriacetate chelates (Fe(III)-NTA) was studied under thermal, oxidative and photochemical stress. The knowledge of chelate stability is fundamental to correctly implement the management system of wastewater treatment plant for application of chelates as catalyst in photo-Fenton process at neutral pH. Fe(III)-NTA solution stability was monitored under different temperature conditions (T=10-30 degrees C), in presence and absence of UV-A irradiation and by adding th...

  16. N-acetylcysteine protects rats with chronic renal failure from gadolinium-chelate nephrotoxicity.

    Directory of Open Access Journals (Sweden)

    Leonardo Victor Barbosa Pereira

    Full Text Available The aim of this study was to evaluate the effect of Gd-chelate on renal function, iron parameters and oxidative stress in rats with CRF and a possible protective effect of the antioxidant N-Acetylcysteine (NAC. Male Wistar rats were submitted to 5/6 nephrectomy (Nx to induced CRF. An ionic-cyclic Gd (Gadoterate Meglumine was administrated (1.5 mM/KgBW, intravenously 21 days after Nx. Clearance studies were performed in 4 groups of anesthetized animals 48 hours following Gd- chelate administration: 1--Nx (n = 7; 2--Nx+NAC (n = 6; 3--Nx+Gd (n = 7; 4--Nx+NAC+Gd (4.8 g/L in drinking water, initiated 2 days before Gd-chelate administration and maintained during 4 days (n = 6. This group was compared with a control. We measured glomerular filtration rate, GFR (inulin clearance, ml/min/kg BW, proteinuria (mg/24 hs, serum iron (µg/dL; serum ferritin (ng/mL; transferrin saturation (%, TIBC (µg/dL and TBARS (nmles/ml. Normal rats treated with the same dose of Gd-chelate presented similar GFR and proteinuria when compared with normal controls, indicating that at this dose Gd-chelate is not nephrotoxic to normal rats. Gd-chelate administration to Nx-rats results in a decrease of GFR and increased proteinuria associated with a decrease in TIBC, elevation of ferritin serum levels, transferrin oversaturation and plasmatic TBARS compared with Nx-rats. The prophylactic treatment with NAC reversed the decrease in GFR and the increase in proteinuria and all alterations in iron parameters and TBARS induced by Gd-chelate. NAC administration to Nx rat did not modify the inulin clearance and iron kinetics, indicating that the ameliorating effect of NAC was specific to Gd-chelate. These results suggest that NAC can prevent Gd-chelate nephrotoxicity in patients with chronic renal failure.

  17. Effect of different chelated zinc sources on the growth and yield of maize (Zea mays L.

    Directory of Open Access Journals (Sweden)

    M. Tahir

    2009-05-01

    Full Text Available A field study was conducted at Agronomic Research Area, University of Agriculture, Faisalabad during spring, 2007 to evaluate the effect of different chelated zinc sources on growth and yield of maize (Zea mays L.. Crop was sown on well prepared soil in 1st week of March, 2007. The experiment was laid out according to randomized complete block design. The treatments comprised of different chelated zinc sources: ZnSO4-DTPA, ZnSO4-Fulvate, ZnSO4-Lignosulphonate, ZnSO4-EDTA and ZnSO4-H2O along with control (no zinc, repeated three times. Results showed that number of cobs plant-1, grain rows cob-1 and oil contents did not differ significantly. However, differences among treatments for plant height at harvest (cm, leaf area plant-1 (cm2, stem diameter (cm, cob length (cm, cob diameter (cm, 100-grains weight (g, number of grains cob-1, grains weight cob-1(g, biological yield (tons ha-1, grain yield (tons ha-1 and protein contents (% were significantly higher. Moreover, results also revealed that ZnSO4-DPTA was found the most effective Zn chelated source among all the treatments. Rest of the chelating agents were not too impressive as they showed varied response for different variables. The result of this experiment suggest further experimentation to explore behaviour of Zn-DTPA with other macro and micro nutrients and to calculate cost benefit ratio for use ofZn chelated compounds.

  18. Which psychosocial factors are related to chelation adherence in thalassemia? A systematic review.

    Science.gov (United States)

    Evangeli, Michael; Mughal, Kulsoom; Porter, John B

    2010-06-01

    Good adherence to iron chelation therapy in thalassemia is crucial. Although there is evidence that adherence is related to regimen factors, there has been less emphasis on the relationship between psychosocial (psychological, demographic and social) factors and adherence. We present a systematic review of psychosocial correlates of chelation adherence in thalassemia. Nine studies met the inclusion criteria. Information was extracted regarding the study characteristics and the relationship between psychosocial factors and chelation adherence. Methodological quality was rated. The studies took place in a range of countries, were mostly cross sectional in design, and examined adherence to deferoxamine (DFO) only. Sample sizes ranged from 15 to 1573. A variety of psychosocial variables were examined. Definitions of adherence varied between studies and non adherence rates were also variable (9 to 66%). Older age was consistently associated with lower levels of chelation adherence. There were few other consistent findings. The methodological quality of studies was variable. There is a need for more methodologically sophisticated and theoretically informed studies on psychosocial correlates of chelation adherence. We offer specific suggestions.

  19. Mechanism and efficiency of cell death of type II photosensitizers: effect of zinc chelation.

    Science.gov (United States)

    Pavani, Christiane; Iamamoto, Yassuko; Baptista, Maurício S

    2012-01-01

    A series of meso-substituted tetra-cationic porphyrins, which have methyl and octyl substituents, was studied in order to understand the effect of zinc chelation and photosensitizer subcellular localization in the mechanism of cell death. Zinc chelation does not change the photophysical properties of the photosensitizers (all molecules studied are type II photosensitizers) but affects considerably the interaction of the porphyrins with membranes, reducing mitochondrial accumulation. The total amount of intracellular reactive species induced by treating cells with photosensitizer and light is similar for zinc-chelated and free-base porphyrins that have the same alkyl substituent. Zinc-chelated porphyrins, which are poorly accumulated in mitochondria, show higher efficiency of cell death with features of apoptosis (higher MTT response compared with trypan blue staining, specific acridine orange/ethidium bromide staining, loss of mitochondrial transmembrane potential, stronger cytochrome c release and larger sub-G1 cell population), whereas nonchelated porphyrins, which are considerably more concentrated in mitochondria, triggered mainly necrotic cell death. We hypothesized that zinc-chelation protects the photoinduced properties of the porphyrins in the mitochondrial environment.

  20. Metal-chelating compounds produced by ectomycorrhizal fungi collected from pine plantations.

    Science.gov (United States)

    Machuca, A; Pereira, G; Aguiar, A; Milagres, A M F

    2007-01-01

    To investigate the in vitro production of metal-chelating compounds by ectomycorrhizal fungi collected from pine plantations in southern Chile. Scleroderma verrucosum, Suillus luteus and two isolates of Rhizopogon luteolus were grown in solid and liquid modified Melin-Norkans (MMN) media with and without iron addition and the production of iron-chelating compounds was determined by Chrome Azurol S (CAS) assay. The presence of hydroxamate and catecholate-type compounds and organic acids was also investigated in liquid medium. All isolates produced iron-chelating compounds as detected by CAS assay, and catecholates, hydroxamates as well as oxalic, citric and succinic acids were also detected in all fungal cultures. Scleroderma verrucosum produced the greatest amounts of catecholates and hydroxamates whereas the highest amounts of organic acids were detected in S. luteus. Nevertheless, the highest catecholate, hydroxamate and organic acid concentrations did not correlate with the highest CAS reaction which was observed in R. luteolus (Yum isolate). Ectomycorrhizal fungi produced a variety of metal-chelating compounds when grown in liquid MMN medium. However, the addition of iron to all fungi cultures reduced the CAS reaction, hydroxamate and organic acid concentrations. Catecholate production was affected differently by iron, depending on the fungal isolate. The ectomycorrhizal fungi described in this study have never been reported to produce metal-chelating compound production. Moreover, apart from some wood-rotting fungi, this is the first evidence of the presence of catecholates in R. luteolus, S. luteus and S. verrucosum cultures.

  1. Increased Uptake of Chelated Copper Ions by Lolium perenne Attributed to Amplified Membrane and Endodermal Damage

    Directory of Open Access Journals (Sweden)

    Anthea Johnson

    2015-10-01

    Full Text Available The contributions of mechanisms by which chelators influence metal translocation to plant shoot tissues are analyzed using a combination of numerical modelling and physical experiments. The model distinguishes between apoplastic and symplastic pathways of water and solute movement. It also includes the barrier effects of the endodermis and plasma membrane. Simulations are used to assess transport pathways for free and chelated metals, identifying mechanisms involved in chelate-enhanced phytoextraction. Hypothesized transport mechanisms and parameters specific to amendment treatments are estimated, with simulated results compared to experimental data. Parameter values for each amendment treatment are estimated based on literature and experimental values, and used for model calibration and simulation of amendment influences on solute transport pathways and mechanisms. Modeling indicates that chelation alters the pathways for Cu transport. For free ions, Cu transport to leaf tissue can be described using purely apoplastic or transcellular pathways. For strong chelators (ethylenediaminetetraacetic acid (EDTA and diethylenetriaminepentaacetic acid (DTPA, transport by the purely apoplastic pathway is insufficient to represent measured Cu transport to leaf tissue. Consistent with experimental observations, increased membrane permeability is required for simulating translocation in EDTA and DTPA treatments. Increasing the membrane permeability is key to enhancing phytoextraction efficiency.

  2. Increased Uptake of Chelated Copper Ions by Lolium perenne Attributed to Amplified Membrane and Endodermal Damage.

    Science.gov (United States)

    Johnson, Anthea; Singhal, Naresh

    2015-10-23

    The contributions of mechanisms by which chelators influence metal translocation to plant shoot tissues are analyzed using a combination of numerical modelling and physical experiments. The model distinguishes between apoplastic and symplastic pathways of water and solute movement. It also includes the barrier effects of the endodermis and plasma membrane. Simulations are used to assess transport pathways for free and chelated metals, identifying mechanisms involved in chelate-enhanced phytoextraction. Hypothesized transport mechanisms and parameters specific to amendment treatments are estimated, with simulated results compared to experimental data. Parameter values for each amendment treatment are estimated based on literature and experimental values, and used for model calibration and simulation of amendment influences on solute transport pathways and mechanisms. Modeling indicates that chelation alters the pathways for Cu transport. For free ions, Cu transport to leaf tissue can be described using purely apoplastic or transcellular pathways. For strong chelators (ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA)), transport by the purely apoplastic pathway is insufficient to represent measured Cu transport to leaf tissue. Consistent with experimental observations, increased membrane permeability is required for simulating translocation in EDTA and DTPA treatments. Increasing the membrane permeability is key to enhancing phytoextraction efficiency.

  3. Reversible adsorption of catalase onto Fe(3+) chelated poly(AAm-GMA)-IDA cryogels.

    Science.gov (United States)

    Aktaş Uygun, Deniz; Uygun, Murat; Akgöl, Sinan; Denizli, Adil

    2015-05-01

    In this presented study, poly(acrylamide-glycidyl methacrylate) [poly(AAm-GMA)] cryogels were synthesized by cryopolymerization technique at sub-zero temperature. Prepared cryogels were then functionalized with iminodiacetic acid (IDA) and chelated with Fe(3+) ions in order produce the metal chelate affinity matrix. Synthesized cryogels were characterized with FTIR, ESEM and EDX analysis, and it was found that the cryogel had sponge like structure with interconnected pores and their pore diameter was about 200 μm. Fe(3+) chelated poly(AAm-GMA)-IDA cryogels were used for the adsorption of catalase and optimum adsorption conditions were determined by varying the medium pH, initial catalase concentration, temperature and ionic strength. Maximum catalase adsorption onto Fe(3+) chelated poly(AAm-GMA)-IDA cryogel was found to be 12.99 mg/g cryogel at 25 °C, by using pH 5.0 acetate buffer. Adsorbed catalase was removed from the cryogel by using 1.0M of NaCl solution and desorption yield was found to be 96%. Additionally, reusability profile of the Fe(3+) chelated poly(AAm-GMA)-IDA cryogel was also investigated and it was found that, adsorption capacity of the cryogels didn't decrease significantly at the end of the 40 reuses. Catalase activity studies were also tested and it was demonstrated that desorbed catalase retained 70% of its initial activity.

  4. Iron Chelation Inhibits Osteoclastic Differentiation In Vitro and in Tg2576 Mouse Model of Alzheimer's Disease.

    Directory of Open Access Journals (Sweden)

    Jun-Peng Guo

    Full Text Available Patients of Alzheimer's disease (AD frequently have lower bone mineral density and higher rate of hip fracture. Tg2576, a well characterized AD animal model that ubiquitously express Swedish mutant amyloid precursor protein (APPswe, displays not only AD-relevant neuropathology, but also age-dependent bone deficits. However, the underlying mechanisms remain poorly understood. As APP is implicated as a regulator of iron export, and the metal chelation is considered as a potential therapeutic strategy for AD, we examined iron chelation's effect on the osteoporotic deficit in Tg2576 mice. Remarkably, in vivo treatment with iron chelator, clinoquinol (CQ, increased both trabecular and cortical bone-mass, selectively in Tg2576, but not wild type (WT mice. Further in vitro studies showed that low concentrations of CQ as well as deferoxamine (DFO, another iron chelator, selectively inhibited osteoclast (OC differentiation, without an obvious effect on osteoblast (OB differentiation. Intriguingly, both CQ and DFO's inhibitory effect on OC was more potent in bone marrow macrophages (BMMs from Tg2576 mice than that of wild type controls. The reduction of intracellular iron levels in BMMs by CQ was also more dramatic in APPswe-expressing BMMs. Taken together, these results demonstrate a potent inhibition on OC formation and activation in APPswe-expressing BMMs by iron chelation, and reveal a potential therapeutic value of CQ in treating AD-associated osteoporotic deficits.

  5. Chapter 5 - Development of iron chelator-nanoparticle conjugates as potential therapeutic agents for Alzheimer disease.

    Science.gov (United States)

    Liu, Gang; Men, Ping; Perry, George; Smith, Mark A

    2009-01-01

    Oxidative stress is known to play a key role in the initiation and promotion of the neurodegeneration that characterizes the pathogenesis of Alzheimer disease (AD). An accumulation of redox active transition metals, including iron and copper, is likely a major generator of reactive oxidative species and other free radicals and is thought to induce a detrimental cycle of oxidative stress, amyloid-beta aggregation, and neurodegeneration. As such, metal chelators may provide an alternative therapeutic approach to sequester redox active metals and prevent the onslaught of oxidative damage. Unfortunately, however, metal chelation approaches are currently limited in their potential, since many cannot readily pass the blood-brain barrier (BBB), due to their hydrophilicity, and many are neurotoxic at high concentrations. To circumvent such issues, here we describe the development of iron chelator-nanoparticle conjugation that allows delivery of target chelator to the brain in the absence of neurotoxicity. Such nanoparticle delivery of iron chelators will likely provide a highly advantageous mode of attack on the oxidative stress that plagues AD as well as other conditions characterized by excess metal accumulation.

  6. Iron Chelation Inhibits Osteoclastic Differentiation In Vitro and in Tg2576 Mouse Model of Alzheimer's Disease.

    Science.gov (United States)

    Guo, Jun-Peng; Pan, Jin-Xiu; Xiong, Lei; Xia, Wen-Fang; Cui, Shun; Xiong, Wen-Cheng

    2015-01-01

    Patients of Alzheimer's disease (AD) frequently have lower bone mineral density and higher rate of hip fracture. Tg2576, a well characterized AD animal model that ubiquitously express Swedish mutant amyloid precursor protein (APPswe), displays not only AD-relevant neuropathology, but also age-dependent bone deficits. However, the underlying mechanisms remain poorly understood. As APP is implicated as a regulator of iron export, and the metal chelation is considered as a potential therapeutic strategy for AD, we examined iron chelation's effect on the osteoporotic deficit in Tg2576 mice. Remarkably, in vivo treatment with iron chelator, clinoquinol (CQ), increased both trabecular and cortical bone-mass, selectively in Tg2576, but not wild type (WT) mice. Further in vitro studies showed that low concentrations of CQ as well as deferoxamine (DFO), another iron chelator, selectively inhibited osteoclast (OC) differentiation, without an obvious effect on osteoblast (OB) differentiation. Intriguingly, both CQ and DFO's inhibitory effect on OC was more potent in bone marrow macrophages (BMMs) from Tg2576 mice than that of wild type controls. The reduction of intracellular iron levels in BMMs by CQ was also more dramatic in APPswe-expressing BMMs. Taken together, these results demonstrate a potent inhibition on OC formation and activation in APPswe-expressing BMMs by iron chelation, and reveal a potential therapeutic value of CQ in treating AD-associated osteoporotic deficits.

  7. Preparation of amine group-containing chelating fiber for thorough removal of mercury ions.

    Science.gov (United States)

    Ma, Nianfang; Yang, Ying; Chen, Shuixia; Zhang, Qikun

    2009-11-15

    An aminated chelating fiber (AF) with high adsorption capacity for mercury ions was prepared by grafting copolymerization of acrylonitrile onto polypropylene fiber, followed by aminating with chelating molecule diethylenetriamine. Effects of reaction conditions such as temperature, reaction time, bath ratio and dosage of catalyst on the grafting yield were studied. Chemical structure, tensile strength and thermal stability of AF were characterized. The adsorption performances for mercury were evaluated by batch adsorption experiments and kinetic experiments. The results show that AF is effective for the removal of mercury over a wide range of pH. The chelating fiber also shows much higher adsorption capacities for mercury, the equilibrium adsorption amount could be as high as 657.9 mg/g for mercury. The high adsorption capacity of Hg(2+) on AF is resulted from the strong chelating interaction between amine groups and mercury ions. Two amine groups coordinate with one mercury ion could be speculated from the adsorption capacity and amine group content on AF. The kinetic adsorption results indicate that the adsorption rates of AF for mercury are very rapid. Furthermore, the residual concentration was less than 1 microg/L with feed concentration of mercury below 1mg/L, which can meet the criterion of drinking water, which indicates that the chelating fiber prepared in this study could be applied to low-level Hg contaminated drinking water purification.

  8. Synthesis, characterization and in vitro anticancer evaluations of two novel derivatives of deferasirox iron chelator.

    Science.gov (United States)

    Salehi, Samie; Saljooghi, Amir Sh; Shiri, Ali

    2016-06-15

    Iron (Fe) chelation therapy was initially designed to alleviate the toxic effects of excess Fe evident in Fe-overload diseases. However, the novel toxicological properties of some Fe chelator-metal complexes have shifted significant attention to their application in cancer chemotherapy. The present study investigates the new role of deferasirox as an anticancer agent due to its ability to chelate with iron. Because of aminoacids antioxidant effect, deferasirox and its two novel amino acid derivatives have been synthesized through the treatment of deferasirox with DCC as well as glycine or phenylalanine methyl ester. All new compounds have been characterized by elemental analysis, FT-IR NMR and mass spectrometry. Therefore, the cytotoxicity of these compounds was screened for antitumor activity against some cell lines using cisplatin as a comparative standard by MTT assay and Flow cytometry. The impact of iron in the intracellular generation of reactive oxygen species was assessed on HT29 and MDA-MB-231 cells. The potential of the synthesized iron chelators for their efficacy to protect cells against model oxidative injury induced was compared. The reactive oxygen species intracellular fluorescence intensity were measured and the result showed that the reactive oxygen species intensity after iron incubation increased while after chelators incubation the reactive oxygen species intensity were decreased significantly. Besides, the effect of the synthesized compounds on mouse fibroblast cell line (L929) was simultaneously evaluated as control. The pharmacological results showed that deferasirox and its two novel aminoacid derivatives were potent anticancer agents.

  9. Intracellular reduction/activation of a disulfide switch in thiosemicarbazone iron chelators

    Science.gov (United States)

    Akam, Eman A.; Chang, Tsuhen M.; Astashkin, Andrei V.

    2014-01-01

    Iron scavengers (chelators) offer therapeutic opportunities in anticancer drug design by targeting the increased demand for iron in cancer cells as compared to normal cells. Prochelation approaches are expected to avoid systemic iron depletion as chelators are liberated under specific intracellular conditions. In the strategy described herein, a disulfide linkage is employed as a redox-directed switch within the binding unit of an antiproliferative thiosemicarbazone prochelator, which is activated for iron coordination following reduction to the thiolate chelator. In glutathione redox buffer, this reduction event occurs at physiological concentrations and half-cell potentials. Consistent with concurrent reduction and activation, higher intracellular thiol concentrations increase cell susceptibility to prochelator toxicity in cultured cancer cells. The reduction of the disulfide switch and intracellular iron chelation are confirmed in cell-based assays using calcein as a fluorescent probe for paramagnetic ions. The resulting low-spin Fe(III) complex is identified in intact Jurkat cells by EPR spectroscopy measurements, which also document a decreased concentration of active ribonucleotide reductase following exposure to the prochelator. Cell viability and fluorescence-based assays show that the iron complex presents low cytotoxicity and does not participate in intracellular redox chemistry, indicating that this antiproliferative chelation strategy does not rely on the generation of reactive oxygen species. PMID:25100578

  10. Arsenic induced oxidative stress and the role of antioxidant supplementation during chelation: a review.

    Science.gov (United States)

    Flora, S J S; Bhadauria, Smrati; Kannan, G M; Singh, Nutan

    2007-04-01

    Arsenic is a naturally occurring metalloid, ubiquitously present in the environment in both organic and inorganic forms. Arsenic contamination of groundwater in the West Bengal basin in India is unfolding as one of the worst natural geoenvironmental disaster to date. Chronic exposure of humans to high concentration of arsenic in drinking water is associated with skin lesions, peripheral vascular disease, hypertension, Blackfoot disease and high risk of cancer The underlying mechanism of toxicity includes the interaction with the sulphydryl groups and the generation of reactive oxygen species leading to oxidative stress. Chelation therapy with chelating agents like British Anti Lewisite (BAL), sodium 2,3-dimercaptopropane 1-sulfonate (DMPS), meso 2,3 dimercaptosuccinic acid (DMSA) etc., is considered to be the best known treatment against arsenic poisoning. The treatment with these chelating agents however is compromised with certain serious drawbacks/side effects. The studies show that supplementation of antioxidants along with a chelating agent prove to be a better treatment regimen. This review attempts to provide the readers with a comprehensive account of recent developments in the research on arsenic poisoning particularly the role of oxidative stress/free radicals in the toxic manifestation, an update about the recent strategies for the treatment with chelating agents and a possible beneficial role of antioxidants supplementation to achieve the optimum effects.

  11. Management of transfusional iron overload – differential properties and efficacy of iron chelating agents

    Directory of Open Access Journals (Sweden)

    Kwiatkowski JL

    2011-09-01

    Full Text Available Janet L Kwiatkowski The Children's Hospital of Philadelphia, Division of Hematology and University of Pennsylvania School of Medicine, Philadelphia, PA, USA Abstract: Regular red cell transfusion therapy ameliorates disease-related morbidity and can be lifesaving in patients with various hematological disorders. Transfusion therapy, however, causes progressive iron loading, which, if untreated, results in endocrinopathies, cardiac arrhythmias and congestive heart failure, hepatic fibrosis, and premature death. Iron chelation therapy is used to prevent iron loading, remove excess accumulated iron, detoxify iron, and reverse some of the iron-related complications. Three chelators have undergone extensive testing to date: deferoxamine, deferasirox, and deferiprone (although the latter drug is not currently licensed for use in North America where it is available only through compassionate use programs and research protocols. These chelators differ in their modes of administration, pharmacokinetics, efficacy with regard to organ-specific iron removal, and adverse-effect profiles. These differential properties influence acceptability, tolerability and adherence to therapy, and, ultimately, the effectiveness of treatment. Chelation therapy, therefore, must be individualized, taking into account patient preferences, toxicities, ongoing transfusional iron intake, and the degree of cardiac and hepatic iron loading. Keywords: transfusion, iron, chelation, magnetic resonance imaging

  12. Synthesis, characterization and cyclic voltammetric study of copper(II) and nickel(II) polymer chelates.

    Science.gov (United States)

    Azmeera, Venkanna; Rastogi, Pankaj Kumar; Adhikary, Pubali; Ganesan, Vellaichamy; Krishnamoorthi, S

    2014-09-22

    Graft copolymers based on dextran (Dx) and 2-acrylamido-2-methyl-1-propane sulphonic acid (AMPS) were synthesized by free radical initiated solution polymerization technique using ceric ammonium nitrate as initiator. These graft copolymers were used to prepare Cu(II) and Ni(II) chelates by reactions with Cu(II) and Ni(II) metal ions respectively. Graft copolymer and metal chelates were characterized by elemental analysis, intrinsic viscosity, FT-IR, scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA) and powder X-ray diffraction (XRD). Elemental analysis, intrinsic viscosity and FT-IR studies revealed the incorporation of metal ions to form metal chelates. SEM studies showed the change in morphology due to metal incorporation. From AFM studies it was observed that there was increase in Root mean square (RMS) roughness values in case of metal complexes. Metal chelates were observed to be thermally more stable than graft copolymer from TGA. UV-vis spectroscopy study revealed increase in absorbance values and cyclic voltammetric (CV) studies showed more than tenfold increase in redox current due to formation of Cu(II) and Ni(II) metal chelates. The binding constants of each complex determined by using UV-visible spectroscopy revealed that Cu(II) has more binding ability than Ni(II).

  13. Chelation: a fundamental mechanism of action of AGE inhibitors, AGE breakers, and other inhibitors of diabetes complications.

    Science.gov (United States)

    Nagai, Ryoji; Murray, David B; Metz, Thomas O; Baynes, John W

    2012-03-01

    This article outlines evidence that advanced glycation end product (AGE) inhibitors and breakers act primarily as chelators, inhibiting metal-catalyzed oxidation reactions that catalyze AGE formation. We then present evidence that chelation is the most likely mechanism by which ACE inhibitors, angiotensin receptor blockers, and aldose reductase inhibitors inhibit AGE formation in diabetes. Finally, we note several recent studies demonstrating therapeutic benefits of chelators for diabetic cardiovascular and renal disease. We conclude that chronic, low-dose chelation therapy deserves serious consideration as a clinical tool for prevention and treatment of diabetes complications.

  14. Study of Competitive Chelating Reaction between Lanthanum and Tribromoarsenazo in the Medium of Weak Acid by Capillary Zone Electrophoresis

    Institute of Scientific and Technical Information of China (English)

    胡涌刚; 周培疆; 邓延倬; 程介克

    2003-01-01

    Two kinds of metal chelates of rare earth elements reacted with tribrimoarsenazo formed under the condition of critic acid were observed by simultaneous technique of capillary electrophoresisphotothermal interference spectrometry. The tendency of the conversion between these chelates as functions of the mole ratio of the reagent and the metal, pH value and the elapsing time was investigated. Kinetic equation of competitive chelating reaction between the TBA-La (Ⅲ) and La (Ⅲ) -critic acid were established. It was found that the competitive chelating reaction follows secondorder kinetics, for this second-order reaction, k=5.55 L·mol-1·S-1.

  15. Comparison of oral and subcutaneous iron chelation therapies in the prevention of major endocrinopathies in beta-thalassemia major patients.

    Science.gov (United States)

    Wang, Chung-Hsing; Wu, Kang-Hsi; Tsai, Fuu-Jen; Peng, Ching-Tien; Tsai, Chang-Hai

    2006-01-01

    While hypertransfusion and subcutaneous iron chelation therapy have increased longevity of patients with beta-thalassemia (thal) major, endocrinopathies have become more common and impair the quality of their lives. Additionally, subcutaneous iron chelation therapy is an uncomfortable experience and can prevent patients from regular compliance with iron chelation therapy. We compared the efficacy of oral deferiprone (L1) to subcutaneous desferrioxamine (DFO) chelation therapy for the prevention of major endocrinopathies (growth hormone insufficiency, diabetes mellitus and gonadal dysfunction) among patients with beta-thal major to see if we could offer these patients an easier and more painless way to reduce their body iron load and related endocrine complications.

  16. Thumbnail Sketches: EDTA-Type Chelating Agents in Everyday Consumer Products: Some Medicinal and Personal Care Products.

    Science.gov (United States)

    Hart, J. Roger

    1984-01-01

    Discusses various ethylenediaminetetraacetate (EDTA)-type chelating agents found in ophthalmic products, personal care products, and disinfectants. Also discusses the properties and action of these EDTA agents. (JN)

  17. Public health department response to mercury poisoning: the importance of biomarkers and risks and benefits analysis for chelation therapy.

    Science.gov (United States)

    McKay, Charles A

    2013-12-01

    Chelation therapy is often used to treat mercury poisoning. Public health personnel are often asked about mercury toxicity and its treatment. This paper provides a public health department response to use of a mercury-containing cosmetic in Minnesota, a perspective on two unpublished cases of chelation treatment for postulated mercury toxicity, and comments on the use of a nonsystemic treatment for removal of mercury following the Iraqi seed coat poisoning incident. Physicians should evaluate sources of exposure, biomarkers, and risks and benefits before recommending chelation therapy for their patients. Potential risks to chelation therapy and its little understood subtle or latent effects are areas of public health concern.

  18. The hexadentate hydroxypyridinonate TREN-(Me-3,2-HOPO) is a more orally active iron chelator than its bidentate analogue.

    Science.gov (United States)

    Yokel, R A; Fredenburg, A M; Durbin, P W; Xu, J; Rayens, M K; Raymond, K N

    2000-04-01

    Bidentate hydroxypyridinone chelators effectively complex and facilitate excretion of trivalent iron. To test the hypothesis that hexadentate chelators are more effective than bidentate chelators at low concentrations, urinary and biliary Fe excretions were determined in Fe-loaded rats before and after administration of a bidentate chelator, Pr-(Me-3,2-HOPO), or its hexadentate analogue, TREN-(Me-3,2-HOPO). The bidentate chelator slightly increased biliary Fe excretion in Fe-loaded rats after IV (90 micromol/kg) and PO (90 or 270 micromol/kg) administration, but chelation efficiency did not exceed 1%. The hexadentate chelator markedly increased biliary Fe excretion, achieving overall chelation efficiencies of 14% after IV administration of 30 micromol/kg and 8 or 3% after PO (30 or 90 micromol/kg) administration. The hexadentate chelator was significantly more effective than the bidentate chelator after IV injection and oral dosing. In chelator-treated Fe-loaded or saline-injected rats, >90% of the excreted Fe was in the bile. Oral TREN-(Me-3,2-HOPO), given to non-Fe-loaded rats, did not appreciably change Fe output, indicating that there was little Fe depletion in the absence of Fe overload. These results support the hypothesis that greater Fe chelation efficiency can be achieved with hexadentate than with bidentate chelators at lower, and presumably safer, concentrations. The results also demonstrate that TREN-(Me-3, 2-HOPO) is a promising, orally effective, Fe chelator.

  19. A kinetic-based sigmoidal model for the polymerase chain reaction and its application to high-capacity absolute quantitative real-time PCR

    Directory of Open Access Journals (Sweden)

    Stewart Don

    2008-05-01

    with the LinReg and Miner automated qPCR data processing packages further demonstrated the superior performance of this kinetic-based methodology. Conclusion Called "linear regression of efficiency" or LRE, this novel kinetic approach confers the ability to conduct high-capacity absolute quantification with unprecedented quality control capabilities. The computational simplicity and recursive nature of LRE quantification also makes it amenable to software implementation, as demonstrated by a prototypic Java program that automates data analysis. This in turn introduces the prospect of conducting absolute quantification with little additional effort beyond that required for the preparation of the amplification reactions.

  20. Antimicrobial activity of coffee melanoidins-a study of their metal-chelating properties.

    Science.gov (United States)

    Rufián-Henares, José A; de la Cueva, Silvia P

    2009-01-28

    Melanoidins comprise a substantial proportion of severely heat-treated foods such as baked cereals or roasted coffee and are widely consumed dietary components. The antimicrobial activity of coffee melanoidins against different pathogenic bacteria has been studied, finding that such activity is due to their metal-chelating properties. Three different mechanisms have been observed: at low concentrations melanoidins exerted a bacteriostatic activity mediated by iron chelation from the culture medium; in the case of bacterial strains that are able to produce siderophores for iron acquisition, melanoidins chelate the siderophore-Fe3+ complex, which could decrease the virulence of such pathogenic bacteria; and, finally, coffee melanoidins also exerted a bactericide activity at high concentrations by removing Mg2+ cations from the outer membrane, promoting the disruption of the cell membrane and allowing the release of intracellular molecules.

  1. The effect of metal chelators on the production of hydroxyl radicals in thylakoids.

    Science.gov (United States)

    Snyrychová, Iva; Pospísil, Pavel; Naus, Jan

    2006-06-01

    The effect of metal chelators (EDTA, DTPA and Desferal) on the metal-catalyzed decomposition of hydrogen peroxide was studied using EPR spin-trapping spectroscopy. The formation of hydroxyl radicals (OH*) in both chemical (Fenton reaction) and biological (thylakoids) systems was stimulated by EDTA. DTPA promoted the generation of OH* in the presence of strong reducing agents, whereas in their absence it acted as an antioxidant. Desferal suppressed OH* production even in the presence of reductants. In our study, we have shown that metal chelators can both stimulate and suppress the formation of OH*, depending on the experimental conditions. In illuminated thylakoids we have observed prooxidant effect of EDTA and DTPA, possibly due to their reduction by some component of the electron transport chain. According to our results, metal chelators should not be used as antioxidants without prior testing of their effect in given samples.

  2. Bis-NHC chelate complexes of nickel(0) and platinum(0).

    Science.gov (United States)

    Brendel, Matthias; Braun, Carolin; Rominger, Frank; Hofmann, Peter

    2014-08-11

    For a long time d(10)-ML2 fragments have been known for their potential to activate unreactive bonds by oxidative addition. In the development of more active species, two approaches have proven successful: the use of strong σ-donating ligands leading to electron-rich metal centers and the employment of chelating ligands resulting in a bent coordination geometry. Combining these two strategies, we synthesized bis-NHC chelate complexes of nickel(0) and platinum(0). Bis(1,5-cyclooctadiene)nickel(0) and -platinum(0) react with bisimidazolium salts, deprotonated in situ at room temperature, to yield tetrahedral or trigonal-planar bis-NHC chelate olefin complexes. The synthesis and characterization of these complexes as well as a first example of C-C bond activation with these systems are reported. Due to the enforced cis arrangement of two NHCs, these compounds should open interesting perspectives for bond-activation chemistry and catalysis.

  3. Synthesis and Preparation of Polysulfone Hollow Fiber Chelating Membrane Modified with Thiourea

    Institute of Scientific and Technical Information of China (English)

    WANG Bing; HUANG Lei; XIAO Feng

    2006-01-01

    Several kinds of chloromethyl polysulfones (CMPF) with different chlorinity and reactive groups were synthesized by Friedel-crafts reaction, which could be utilized as reactively matrix membrane materials. The CMPF hollow matrix membranes were prepared with phase inversion by utilization of CMPF/additive/DMAC casting solution and CMPF as membrane materials. It was found that the effects of additive content, bore liquid and dry spinning distance on the structure of CMPF hollow fiber matrix membrane were different. A high qualified polysulfone hollow fiber chelating membrane modified with thiourea as chelating groups was prepared using CMPF as membrane matrix materials,through the reaction between thiourea and CMPF hollow fiber matrix membrane to afford the methyl iso-thiourium polysulfone. The experimental results showed that thermal drawing could increase the mechanical properties of matrix membrane, and the thermal treatment could increase the homogeneity and stability of the structure of polysulfone hollow fiber chelating membrane modified with thiourea.

  4. Synthesis and Characterization of 2-Decyl-DTPA and Its Gd(Ⅲ) Chelate

    Institute of Scientific and Technical Information of China (English)

    FENG Zhi-ming; LI Feng; CHEN Rong; ZHU Xiao-juan; LI Xiao-ru

    2004-01-01

    The present paper covers the synthesis and the characterization of ligand 2-decyl-3, 6, 9-tris(carboxymethyl)-3,6,9-triazaundecan-1,11-dioic acid, H5L, and its Gd(Ⅲ) chelate. The protonation constants for H5L(lgKHi=10.90, 8.50, 4.55, 2.92, 2.20) and the stability constant for GdL2- (lgKGdL2-=22.80) were determined by means of potentiometric titration. They are similar to the corresponding values of DTPA and Gd-DTPA, respectively. The results obtained show that the basicity of the ligand and the stability constant of its Gd(Ⅲ) chelate are not obviously altered after the introduction of a linear chain decyl group into the terminal acetic acid residue of DTPA. The Gd(Ⅲ) chelate may be a potential contrast agent with liver-specificity for magnetic resonance imaging(MRI).

  5. Radiopharmaceutical stannic Sn-117m chelate compositions and methods of use

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, Suresh C. (Setauket, NY); Meinken, George E. (Middle Island, NY)

    2001-01-01

    Radiopharmaceutical compositions including .sup.117m Sn labeled stannic (Sn.sup.4+) chelates are provided. The chelates are preferably polyhydroxycarboxylate, such as oxalates, tartrates, citrates, malonates, gluconates, glucoheptonates and the like. Methods of making .sup.117m Sn-labeled (Sn.sup.4+) polyhydroxycarboxylic chelates are also provided. The foregoing pharmaceutical compositions can be used in methods of preparing bone for scintigraphical analysis, for radiopharmaceutical skeletal imaging, treatment of pain resulting from metastatic bone involvement, treatment of primary bone cancer, treatment of cancer resulting from metastatic spread to bone from other primary cancers, treatment of pain resulting from rheumatoid arthritis, treatment of bone/joint disorders and to monitor radioactively the skeletal system.

  6. Separation of metal chelates and organometallic compounds by SFC and SFE/GC.

    Science.gov (United States)

    Wai, C M; Wang, S

    2000-07-05

    Supercritical fluid chromatography (SFC) combines the high diffusion coefficients of gas chromatography (GC) and the solubility properties of liquid chromatography (LC). SFC generally requires lower temperatures for chromatographic separations and thus is more suitable for analyzing thermally labile compounds including a number of metal chelates and organometallic compounds. SFC also allows interfacing between supercritical fluid extraction (SFE) and chromatographic analysis of metal-containing compounds. A large number of metal chelates and organometallic compounds can be separated by SFC. This article summarizes SFC separation of various chelates of transition metals, heavy metals, lanthanides and actinides as well as organometallic compounds of lead, mercury, and tin reported in the recent literature. This article also discusses SFC detection systems and the determination of solubility of organometallic compounds by SFC.

  7. REVIEW ARTICLE:Future of Lead Chelation – Distribution and Treatment

    Directory of Open Access Journals (Sweden)

    Venkatesh Thuppil

    2012-01-01

    Full Text Available Lead is the major environmental toxin resulting in the ill health and deleterious effect on almost all organs in the human body in a slow and effective manner. The best treatment for lead poisoning is chelation therapy which is next only to prevention. The authors describe the disruption of homeostasis of the human body by lead in various tissues like blood, bones, liver, kidneys and brain; and the ability of lead to enter the cell using calcium channels and calcium receptors like Ca++ dependant K+ ion channels, transient receptor potential channels, T-tubules, calmodulin receptors, inositol trisphosphate receptors and ryanodine receptors. We report a few novel chelating agents like ionophores, decadentate ligands, picolinate ligands, octadentate ligand, allicin, thiamine, that show good potential for being used in chelation therapy. Future of leadpoisoning is a challenge to all and it needs to be meticulously studies to have an economic and health approach.

  8. Reversible immobilization of laccase onto metal-ion-chelated magnetic microspheres for bisphenol A removal.

    Science.gov (United States)

    Lin, Jiahong; Liu, Yingju; Chen, Shi; Le, Xueyi; Zhou, Xiaohua; Zhao, Zhiyong; Ou, Yiyi; Yang, Jianhua

    2016-03-01

    Increasing attention has been given to nanobiocatalysis for commercial applications. In this study, laccase was reversibly immobilized onto Cu(ΙΙ)- and Mn(ΙΙ)-chelated magnetic microspheres and successfully applied to remove bisphenol A (BPA) from water. The results indicated that the loading of laccase onto the metal-ion-chelated magnetic microspheres was approximately 100mg/g. After five successive adsorption-desorption cycles, the laccase adsorption capacities did not change. In comparison with free laccase, the thermal and storage stabilities of immobilized laccase were significantly improved. Immobilized laccase exhibited a high removal efficiency for BPA under the combined actions of biodegradation and adsorption. Greater than 85% of BPA was removed under optimum conditions. The effects of various factors on the BPA removal efficiency of immobilized laccase were analysed. The results showed that metal-ion-chelated magnetic microspheres have great potential for industrial applications. Copyright © 2015 Elsevier B.V. All rights reserved.

  9. Critical evaluation of treatment strategies involving adsorption and chelation for wastewater containing copper, zinc and cyanide

    Energy Technology Data Exchange (ETDEWEB)

    Bose, P.; Bose, M.A.; Kumar, S. [Indian Inst. of Technology, Kanpur (India). Dept Civil Engineering, Environmental Engineering & Management Programme

    2002-11-01

    Industrial wastewater containing heavy metals and cyanide must be treatment for removal of both metals and cyanide before disposal. The study described evaluated treatment strategies involving some indigenous adsorbents and a low-cost chelating agent for treatment of a simulated wastewater containing copper and zinc, complexed with cyanide. Treatment strategies involving three adsorbents, sulfonated coal, biosorbent G. lucidum, and iron oxide coated sand (IOCS), and a chelating agent, insoluble agro-based starch xanthate (IAX), were tested. The evaluation procedure involved comparison of the performance of these treatment strategies with that of conventional treatment. Results indicate that treatment using the chelating agent IAX has the greatest potential as an alternative to the conventional treatment technique. The three adsorbents tested, although reported to be very effective in removing copper and zinc from pure systems, exhibit diminished metal removal capacity in the presence of cyanide, and hence are unsuitable.

  10. Conversion of agonist site to metal-ion chelator site in the beta(2)-adrenergic receptor

    DEFF Research Database (Denmark)

    Elling, C E; Thirstrup, K; Holst, Birgitte

    1999-01-01

    in the mutant receptors not by normal catecholamine ligands but instead either by free zinc ions or by zinc or copper ions in complex with small hydrophobic metal-ion chelators. Chelation of the metal ions by small hydrophobic chelators such as phenanthroline or bipyridine protected the cells from the toxic......Previously metal-ion sites have been used as structural and functional probes in seven transmembrane receptors (7TM), but as yet all the engineered sites have been inactivating. Based on presumed agonist interaction points in transmembrane III (TM-III) and -VII of the beta(2)-adrenergic receptor......, in this paper we construct an activating metal-ion site between the amine-binding Asp-113 in TM-III-or a His residue introduced at this position-and a Cys residue substituted for Asn-312 in TM-VII. No increase in constitutive activity was observed in the mutant receptors. Signal transduction was activated...

  11. Molecular engineering of lanthanide ion chelating phospholipids generating assemblies with a switched magnetic susceptibility.

    Science.gov (United States)

    Isabettini, Stéphane; Massabni, Sarah; Hodzic, Arnel; Durovic, Dzana; Kohlbrecher, Joachim; Ishikawa, Takashi; Fischer, Peter; Windhab, Erich J; Walde, Peter; Kuster, Simon

    2017-08-09

    Lanthanide ion (Ln(3+)) chelating amphiphiles are powerful molecules for tailoring the magnetic response of polymolecular assemblies. Mixtures of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dimyristoyl-sn-glycero-3-phospho-ethanolamine-diethylene triaminepentaacetate (DMPE-DTPA) complexed to Ln(3+) deliver highly magnetically responsive bicelles. Their magnetic properties are readily tuned by changing the bicellar size or the magnetic susceptibility Δχ of the bilayer lipids. The former technique is intrinsically bound to the region of the phase diagram guarantying the formation of bicelles. Methods aiming towards manipulating the Δχ of the bilayer are comparatively more robust, flexible and lacking. Herein, we synthesized a new Ln(3+) chelating phospholipid using glutamic acid as a backbone: DMPE-Glu-DTPA. The chelate polyhedron was specifically engineered to alter the Δχ, whilst remaining geometrically similar to DMPE-DTPA. Planar asymmetric assemblies hundreds of nanometers in size were achieved presenting unprecedented magnetic alignments. The DMPE-Glu-DTPA/Ln(3+) complex switched the Δχ, achieving perpendicular alignment of assemblies containing Dy(3+) and parallel alignment of those containing Tm(3+). Moreover, samples with chelated Yb(3+) were more alignable than the Tm(3+) chelating counterparts. Such a possibility has never been demonstrated for planar Ln(3+) chelating polymolecular assemblies. The physico-chemical properties of these novel assemblies were further studied by monitoring the alignment behavior at different temperatures and by including 16 mol% of cholesterol (Chol-OH) in the phospholipid bilayer. The DMPE-Glu-DTPA/Ln(3+) complex and the resulting assemblies are promising candidates for applications in numerous fields including pharmaceutical technologies, structural characterization of membrane biomolecules by NMR spectroscopy, as contrasting agents for magnetic resonance imaging, and for the development of smart

  12. Ethyl acetoacetate ligand distribution in the course of titanium n-butoxide chelation

    Energy Technology Data Exchange (ETDEWEB)

    Kurajica, S., E-mail: stankok@fkit.hr; Škorić, I.; Lozić, I.; Mandić, V.

    2014-10-15

    Sols obtained by chelation of titanium n-butoxide with ethyl acetoacetate, Eaa, in various ratios have been subjected to FTIR, {sup 1}H and {sup 13}C NMR, HSQC and UV–Vis spectroscopy in order to provide insight in the compounds obtained, their structure and quantitative relationships. Three compounds, the bis-chelated monomer, Ti(O{sup n}Bu){sub 2}(Eaa){sub 2}, bis-chelated dimer, (Ti(O{sup n}Bu){sub 3}Eaa){sub 2} and monochelated dimer, Ti{sub 2}(O{sup n}Bu){sub 7}Eaa have been established. As the molar ratio Eaa/Ti(O{sup n}Bu){sub 4} increases, the coordination changes from the monochelated and bis-chelated dimer to the bis-chelated monomer. Additionally, the transesterification reaction, influencing the chemical composition of the compounds was noted. The hydrolysis of the prepared sols was partial, leaving some residual butoxy and ethyl acetoacetate groups attached to titanium. Thermal treatment of the prepared amorphous gels at 350 °C yielded with the formation of nanocrystalline anatase. It was noted that high Eaa/Tnb ratio slightly retards the anatase formation. - Highlights: • Titanium n-butoxide was modified with ethyl acetoacetate in various ratios. • Among other chelate phases, previously undescribed Ti{sub 2}(O{sup n}Bu){sub 7}Eaa was obtained. • NMR-based mass balance procedure was introduced to obtain quantitative relationships. • The transesterification reaction has been noted. • Nanocrystalline anatase has been obtained by thermal treatment at 350 °C.

  13. Stereoselective coordination: a six-membered P,N-chelate tailored for asymmetric allylic alkylation.

    Science.gov (United States)

    Császár, Z; Farkas, G; Bényei, A; Lendvay, G; Tóth, I; Bakos, J

    2015-10-01

    Six-membered chelate complexes [Pd(1a-b)Cl2], (2a-b) and [Pd(1a-b)(η(3)-PhCHCHCHPh)]BF4, (3a-b) of P,N-type ligands 1a, ((2S,4S)-2-diphenyl-phosphino-4-isopropylamino-pentane) and 1b, ((2S,4S)-2-diphenyl-phosphino-4-methylamino-pentane) have been prepared. The Pd-complexes have been characterized in solution by 1D and 2D NMR spectroscopy. The observed structures were confirmed by DFT calculations and in the case of 2a also by X-ray crystallography. Unexpectedly, the coordination of the all-carbon-backbone aminophosphine 1a resulted in not only a stereospecific locking of the donor nitrogen atom into one of the two possible configurations but also the conformation of the six-membered chelate rings containing three alkyl substituents was forced into the same single chair structure showing the axially placed isopropyl group on the coordinated N-atom. The stereodiscriminative complexation of 1a led to the formation of a palladium catalyst with a conformationally rigid chelate having a configurationally fixed nitrogen and electronically different coordination sites due to the presence of P and N donors. The stereochemically fixed catalyst provided excellent ee's (up to 96%) and activities in asymmetric allylic alkylation reactions. In contrast, the chelate rings formed by 1b exist in two different chair conformations, both containing axial methyl groups, but with the opposite configurations of the coordinated N-atom. Pd-complexes of 1b provided low enantioselectivities in similar alkylations, therefore emphasizing the importance of the stereoselective coordination of N-atoms in analogous P-N chelates. The factors determining the coordination of the ligands were also studied with respect to the chelate ring conformation and the nitrogen configuration.

  14. Synthesis and Evaluation of New Generation Cross-Bridged Bifunctional Chelator for (64)Cu Radiotracers.

    Science.gov (United States)

    Dale, Ajit V; An, Gwang Il; Pandya, Darpan N; Ha, Yeong Su; Bhatt, Nikunj; Soni, Nisarg; Lee, Hochun; Ahn, Heesu; Sarkar, Swarbhanu; Lee, Woonghee; Huynh, Phuong Tu; Kim, Jung Young; Gwon, Mi-Ri; Kim, Sung Hong; Park, Jae Gyu; Yoon, Young-Ran; Yoo, Jeongsoo

    2015-09-08

    Bifunctional chelators have been successfully used to construct (64)Cu-labeled radiopharmaceuticals. Previously reported chelators with cross-bridged cyclam backbones have various essential features such as high stability of the copper(II) complex, high efficiency of radiolabeling at room temperature, and good biological inertness of the radiolabeled complex, along with rapid body clearance. Here, we report a new generation propylene-cross-bridged chelator with hybrid acetate/phosphonate pendant groups (PCB-TE1A1P) developed with the aim of combining these key properties in a single chelator. The PCB-TE1A1P was synthesized from cyclam with good overall yield. The Cu(II) complex of our chelator showed good robustness in kinetic stability evaluation experiments, such as acidic decomplexation and cyclic voltammetry studies. The Cu(II) complex of PCB-TE1A1P remained intact under highly acidic conditions (12 M HCl, 90 °C) for 8 d and showed quasi-reversible reduction/oxidation peaks at -0.77 V in electrochemical studies. PCB-TE1A1P was successfully radiolabeled with (64)Cu ions in an acetate buffer at 60 °C within 60 min. The electrophoresis study revealed that the (64)Cu-PCB-TE1A1P complex has net negative charge in aqueous solution. The biodistribution and in vivo stability study profiles of (64)Cu-PCB-TE1A1P indicated that the radioactive complex was stable under physiological conditions and cleared rapidly from the body. A whole body positron emission tomography (PET) imaging study further confirmed high in vivo stability and fast clearance of the complex in mouse models. In conclusion, PCB-TE1A1P has good potential as a bifunctional chelator for (64)Cu-based radiopharmaceuticals, especially those involving peptides.

  15. Chelator-induced phytoextraction of zinc and copper by rice seedlings.

    Science.gov (United States)

    Yu, Xiao-Zhang; Wang, Dun-Qiu; Zhang, Xue-Hong

    2014-05-01

    Solution culture was carried to investigate capacity of synthetic aminopolycarboxylic acids (ethylenediamine tetraacetate, N-hydroxyethylenediaminetriacetic acid, and diethylenetriamine-pentaacetate) for enhancing botanical removal and transport of heavy metals (Cu and Zn) by plants. Biodegradable organic acids (citric acid, malic acid, and oxalic acid) were also selected as alternatives to compare them with synthesized chelating agents for effectiveness. Young rice seedlings (Oryza sativa L. cv. XZX 45) were grown in nutrient solutions treated with single or combined metal solutions in presence or absence of chelating compounds. Calculation by chemical equilibrium program VISUAL MINTEQ showed that different chelating compounds had various complex potential with Cu(2+) and Zn(2+) ions, in which synthetic chelators exhibited higher complexed capability than biodegradable organic acids. All applied synthetic aminopolycarboxylic acids significantly decreased removal of metal from nutrient solution (p 0.05), compared with the treatment without metal ligands. Synthetic aminopolycarboxylic acids significantly decreased metal concentrations in plant materials in all treatments (p < 0.01). However, biodegradable organic acids decreased metal concentrations in roots (p < 0.01), but enhanced them in shoots (p < 0.01). Results obtained indicated that synthetic aminopolycarboxylic acids decreased uptake of metals by rice seedlings, but translocation of metals complexed within plant materials was evident. Although exogenous biodegradable organic acids showed negligible effect on botanical removal of metals, metals complexed with organic acids was more mobile than those complexed with other chelating agents. These information collected here had important implication for the use of biodegradable metal chelators in transport of essential micronutrients in plant nutrition.

  16. The preparation and characterization of novel human-like collagen metal chelates

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Chenhui; Sun, Yan [Shaanxi Key Laboratory of Degradable Biomedical Materials, School of Chemical Engineering Northwest University, Xi' an 710069 (China); Shaanxi R and D Center of Biomaterials and Fermentation Engineering, Xi' an 710069 (China); Wang, Yaoyu [Key Laboratory of Synthetic and Natural Functional Molecule Chemistry of the Ministry of Education, Xi' an 710069 (China); Luo, Yane, E-mail: luoyane@nwu.edu.cn [Shaanxi Key Laboratory of Degradable Biomedical Materials, School of Chemical Engineering Northwest University, Xi' an 710069 (China); Shaanxi R and D Center of Biomaterials and Fermentation Engineering, Xi' an 710069 (China); Fan, Daidi, E-mail: fandaidi@nwu.edu.cn [Shaanxi Key Laboratory of Degradable Biomedical Materials, School of Chemical Engineering Northwest University, Xi' an 710069 (China); Shaanxi R and D Center of Biomaterials and Fermentation Engineering, Xi' an 710069 (China)

    2013-07-01

    In order to develop the nutritional trace elements which could be absorbed and utilized effectively, protein chelates were adopted. Calcium, copper and manganese were considered based on their physiological functions, and the new chelates of HLC-Ca, HLC-Cu and HLC-Mn were formed in MOPS or MES buffer and purified by gel chromatography, and then freeze-dried. And they were detected and analyzed by atomic absorption spectrophotometry, ultraviolet–visible absorption (UV–vis) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, fluorescence quenching method, circular dichroism (CD) and differential scanning calorimetry (DSC). The results showed that some chemical reactions happened between HLC and the three metal ions to form new chemical compounds. The thermodynamic parameters, ∆H, ∆G and ∆S, showed that the chelation process between HLC and metal ions was performed spontaneously. Fluorescence quenching spectra of HLC indicated that the quenching mechanism was static in nature. According to the data of DSC, the new chelates were more stable than the free HLC. And HLC-metal complex was non-toxic to the BHK21 cell through MTT assay. - Highlights: ► HLC-Ca, HLC-Cu and HLC-Mn were new chemical compounds and different to free HLC. ► Possible sites for Ca{sup 2+}, Cu{sup 2+} and Mn{sup 2+} to bind with HLC were presented. ► The chelation process between HLC and metal ions was performed spontaneously. ► The thermodynamic stability of the new chelates was higher than that of free HLC.

  17. Arsenic and lead induced free radical generation and their reversibility following chelation.

    Science.gov (United States)

    Flora, S J S; Flora, G; Saxena, G; Mishra, M

    2007-04-15

    Health hazards caused by heavy metals have become a great concern to the population. Lead and arsenic are one of the most important current global environmental toxicants. Their toxic manifestations are being considered caused primarily due to the imbalance between pro-oxidant and antioxidant homeostasis and also due to a high affinity of these metals for thiol groups on functional proteins. They also interfere with a number of other body functions and are known to affect central nervous system (CNS), hematopoietic system, liver and kidneys and produce serious disorders. They produce both acute and chronic poisoning, of which chronic poisoning is more dangerous as its very difficult to revert back to normal condition after chronic exposure to these insidious metals present in our life. Despite many years of research, we are still far from an effective treatment of chronic plumbism and arsenicosis. Current approved treatment lies in the administration of chelating agents that forms an insoluble complex with the metal and removes it. They have been used clinically as antidotes for treating acute and chronic poisoning. The most widely used chelating agents are calcium disodium ethylenediamine tetra acetic acid (CaNa2EDTA), D-penicillamine and British anti-lewisite (BAL). Meso 2,3 dimercaptosuccinic acid (DMSA), an analogue of BAL, has been tried successfully in animals as well as in humans. But it is unable to remove the metal from intracellular sites. Effective chelation therapy for intoxication by heavy metals depends on whether the chelating agents are able to reach the intracellular site where the heavy metal is firmly bound. One of the important approaches has been the use of combination therapy. This includes use of structurally different chelators or a combination of an adjuvant/ antioxidant/ herbal extracts and a chelator to provide better clinical/ biochemical recovery. A number of other strategies have been suggested to minimize the numerous problems. This

  18. Chelation in Metal Intoxication XLVI:Synthesis of Some α-Mercapto-β-Substituted Aryl Acrylic Acids and Their In vitro Cadmium Chelating Ability

    Institute of Scientific and Technical Information of China (English)

    MADHUMITA CHATTERJEE; VINOD K. DWIVEDI; KIRTI KHANDEKAR; SUSHIL K. TANDON

    2004-01-01

    Objective To synthesize some new α-mercapto-β-substituted aryl acrylic acids, characterize them and investigate their in vitro cadmium chelating ability. Methods Six α-mercapto-β-substituted aryl acrylic acids were prepared by the alkaline hydrolysis of 5-(aryl methylene)rhodanines, obtained from the condensation of substituted aldehydes and rhodanine following the reported procedure. The new compounds were characterized by elemental analysis, infrared (IR) and nuclear magnetic resonance (NMR) spectroscopy. The liver and kidney from cadmium chloride pre-administered rats were homogenized and their nuclear mitochondrial fraction (NMF) and supernatant cytosol fraction (SCF) were separated. A measured volume of each fraction was dialyzed separately using "dialysis sack" against buffered-KCl medium containing a compound in the final concentration of 1×10-3 mol/L for 3 h at 37℃C. The whole content of "sack" was subjected to cadmiumestimation following digestion with conc. Nitric acid was detected using flame atomic absorption spectrometer. Results The in vitro screening showed that α-mercapto-β-(p-methoxyphenyl)acrylic acid (compound 2) and α-mercapto-β-(m-methoxy, p-hydroxyphenyl) acrylic acid (compound 4) were more effective than α-mercapto-β-thienyl acrylic acid (compound 1) and α-mercapto-β-(p-dimethylaminophenyl) acrylic acid (compound 3) in mobilizing cadmium as their dialyzable chelates. The presence of a methoxy group on the phenyl moiety (compounds 2 and 4) increases the metal chelating ability of mercapto acrylic acids. Conclusions Compounds 2 and 4 seem to have accessibility to the cellular system and capability of chelating-out the intracellularly bound cadmium.

  19. STUDY ON THE KINETICS OF POLYMERIZATION OF MMA BY COPPER(Ⅱ) CHELATING RESINS

    Institute of Scientific and Technical Information of China (English)

    WangHongzuo; JiangYuanzhang; 等

    1993-01-01

    The polymerization of MMA initiated by copper(Ⅱ) chelating resins/CCl4 system was studied.From the kinetic data,the kinetic equation of polymerization can be expressed as Rp=Ke-56400/RT[MMA]1.57[CCl4]m[RESIN-Cu]0.18 where m:3-4.5,when[CCl4] 0.1-6.93M.The free radical polymerization mechanism is proposed.The primary radicals are formed by the process of complexation-chlorine transformation among the copper(Ⅱ) chelating resin,CCl4 and methacrylate.

  20. Rationale for the Successful Management of EDTA Chelation Therapy in Human Burden by Toxic Metals.

    Science.gov (United States)

    Ferrero, Maria Elena

    2016-01-01

    Exposure to environmental and occupational toxicants is responsible for adverse effects on human health. Chelation therapy is the only procedure able to remove toxic metals from human organs and tissue, aiming to treat damage related to acute and/or chronic intoxication. The present review focuses on the most recent evidence of the successful use of the chelating agent ethylenediaminetetraacetic acid (EDTA). Assessment of toxic-metal presence in humans, as well as the rationale of EDTA therapy in cardiovascular and neurodegenerative diseases, is reported.